WorldWideScience

Sample records for stability studies carried

  1. Local Dynamic Stability Associated with Load Carrying

    Directory of Open Access Journals (Sweden)

    Jian Liu

    2013-03-01

    Conclusion: Current study confirmed the sensitivity of local dynamic stability measure in load carrying situation. It was concluded that load carrying tasks were associated with declined local dynamic stability, which may result in increased risk of fall accident. This finding has implications in preventing fall accidents associated with occupational load carrying.

  2. Stabilization of magnetohydrodynamic instabilities in a current-carrying stellarator

    International Nuclear Information System (INIS)

    Matsuoka, K.; Miyamoto, K.

    1979-02-01

    Stable profiles against MHD instabilities are given in a cylindrical current-carrying stellarator. The comparison theorem, i.e., guiding principle for stabilization, is obtained in the same way as in a tokamak. As the external rotational transform due to an l = 2 helical field increases, MHD properties in a stellarator are improved than in a tokamak and the minimum value of q(a) which provides simultaneous stabilization of MHD modes can be lowered less than 2 even without a conducting shell. In an l = 3 stellarator, however, as shown from the Euler equation, the configuration becomes more unstable than in a tokamak and strong tailoring of the current profile is necessary in order to stabilize MHD modes. (author)

  3. Carry

    DEFF Research Database (Denmark)

    Koijen, Ralph S.J.; Moskowitz, Tobias J.; Heje Pedersen, Lasse

    that include global equities, global bonds, currencies, commodities, US Treasuries, credit, and equity index options. This predictability underlies the strong returns to "carry trades" that go long high-carry and short low-carry securities, applied almost exclusively to currencies, but shown here...

  4. Carry

    DEFF Research Database (Denmark)

    Koijen, Ralph S.J.; Moskowitz, Tobias; Pedersen, Lasse Heje

    2018-01-01

    -sectionally and in time series for a host of different asset classes, including global equities, global bonds, commodities, US Treasuries, credit, and options. Carry is not explained by known predictors of returns from these asset classes, and it captures many of these predictors, providing a unifying framework...... for return predictability. We reject a generalized version of Uncovered Interest Parity and the Expectations Hypothesis in favor of models with varying risk premia, in which carry strategies are commonly exposed to global recession, liquidity, and volatility risks, though none fully explains carry’s premium....

  5. Carrying shopping bags does not alter static postural stability and gait parameters in healthy older females.

    Science.gov (United States)

    Bampouras, Theodoros M; Dewhurst, Susan

    2016-05-01

    Food shopping is an important aspect of maintaining independence and social interaction in older age. Carriage of shopping bags alters the body's weight distribution which, depending on load distribution, could potentially increase instability during standing and walking. The study examined the effect of carrying UK style shopping bags on static postural stability and gait in healthy older and young females. Nine older (71.0±6.0 years) and 10 young (26.7±5.2 years) females were assessed in five conditions carrying no bags, one 1.5kg bag in each hand, one 3kg bag in each hand, one 1.5kg bag in preferred hand, one 3kg bag in preferred hand. Antero-posterior and medio-lateral displacement, and 95% ellipse area from a 30s quiet standing were used for postural stability assessment. Stride length and its coefficient of variation, total double support time, step asymmetry and gait stability ratio were calculated from 1min treadmill walking at self-selected speed for gait assessment. Carrying shopping bags did not negatively affect postural stability or gait variables, in either group. Further, in older individuals, a decrease in sway velocity was found when holding bags during the postural stability assessment (pbags, irrespective of the load distribution, may have a stabilising effect during quiet standing. These results should help to alleviate concerns regarding safety of carrying shopping bags and help encourage shopping, both as a social and as a physical activity. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. Measuring Social carrying Capacity: An Exploratory Study

    OpenAIRE

    López-Bonilla, Jesús Manuel; López-Bonilla, Luis Miguel

    2007-01-01

    The tourist carrying capacity commands a growing interest given that it is closely linked with sustainable tourist development. The justification of the utility of this concept is given by means of a simple and efficient methodological proposal, by analysing the social carrying capacity. To this end, an empirical application is carried out in the Western Andalusia. In some of the cases analysed, the satisfaction of the tourist is found to decline when the levels of the tourist use are higher ...

  7. The effects of carrying extra weight on ankle stability in adolescent basketball players.

    Science.gov (United States)

    Ozunlu, Nihan; Basari, Gul Oznur; Baltaci, Gul

    2010-01-01

    The purpose of this study was to investigate the effects of weight on ankle stability in adolescent basketball players. 20 non-injured subjects (age=11.05+/-1.5 years) were included in this study. Each subject performed a 15min warm-up by running or riding a stationary bike. The Star Excursion Balance Test (SEBT), single-leg balance test (performed with eyes open and eyes closed) and vertical jump test were performed with dominant lower extremity. 1 week later, same tests were performed with a schoolbag. The schoolbag contained weight bars as 20% of the players own body weight. Only posteromedial component of SEBT had significant difference between non-weight measurement and weighted measurement (p=0.004). Single-leg stance test performed with eyes open (p=0.006) and closed (p=0.001) had significant difference between non-weight measurement and weighted measurement. Also the vertical jump test had significant difference between non-weight measurement and weighted measurement (p=0.001). These findings indicate that 20% weight of their own body weight does not affect dynamic ankle stability and postural limitations, which are magnified by advancing weight. We are confident in our conclusions because of the three-way interaction noted with posterior/medial with weight in SEBT. Furthermore, Star Excursion Balance test is more effective both weight and non-weight in measuring functional stability of the ankle. Copyright 2010 Elsevier Ltd. All rights reserved.

  8. Study on Tourist Carrying Capacity Based on Matter Element Analysis

    Institute of Scientific and Technical Information of China (English)

    LiuYunguo; FanTing; LiXin; ZhouMing; WangXianhai

    2005-01-01

    This paper proposes that it is necessary to implement the concept of tourist carrying capacity to facilitate the tourism planning, and presents a method to evaluate the carrying capacity. The method called matter element analysis can solve the uncertain and incompatible problem of the evaluated factors in assessing carrying capacity.The current state of a destination's carrying capacity can be determined by establishing the standard indexes and the matter element model. Through the evaluating of the travel industry zones of the Autonomous Prefecture of Western Hunan, the method is proved to be simple and feasible, and it is improved to be significant for the tourism planning and determination as well as the sustainable development of the regional tourism.

  9. Effect of Baffles on the Sloshing in Road Tankers Carrying LPG: A Comparative Numerical Study

    Directory of Open Access Journals (Sweden)

    J. L. Bautista-Jacobo

    2015-01-01

    Full Text Available This work presents a comparative numerical study of the effect of using baffles, and its design, on the behavior of sloshing in a partially filled road tanker carrying LPG. Navier-Stokes equations and standard k-ε turbulence model are used to simulate fluid movement; the Volume of Fluid (VOF method is used to track the liquid-gas interface. Velocity distributions, sloshing stabilization times, and contours of turbulent kinetic energy, which are of high importance in choosing the best design of baffles, are shown. The results show sloshing stabilization times of 22 and 21 s for road tankers with cross-shaped (Type I and X-shaped (Type II baffles, respectively, finding lower values of turbulent kinetic energy for Type II design, being, therefore, the best design of baffles for damping of sloshing and vehicle control among studied ones.

  10. Study on ac losses of HTS coil carrying ac transport current

    International Nuclear Information System (INIS)

    Dai Taozhen; Tang Yuejin; Li Jingdong; Zhou Yusheng; Cheng Shijie; Pan Yuan

    2005-01-01

    Ac loss has an important influence on the thermal performances of HTS coil. It is necessary to quantify ac loss to ascertain its impact on coil stability and for sizing the coil refrigeration system. In this paper, we analyzed in detail the ac loss components, hysteresis loss, eddy loss and flux flow loss in the pancake HTS coil carrying ac transport current by finite element method. We also investigated the distribution of the ac losses in the coil to study the effects of magnetic field distribution on ac losses

  11. 131I albumin of patients carrying progressive systemic sclerosis study

    International Nuclear Information System (INIS)

    Cossermelli, W.; Carvalho, N.; Papaleo Netto, M.

    1974-01-01

    131 I albumin metabolic changes were studied in 14 female patients with progressive systemic sclerosis. A statistical study of the gathered data disclosed increased distribution and turnover half-life and diminished turnover rate of radioactive substance. Since T/2 of turnover and turnover rate are the result produced by the albumin synthesis and degradation, they are probably lowered during active disease causing hypoalbuminemia. The aminoacids also are probably absorbed by other protein like the gammaglobuline synthesis [pt

  12. Food Fortification Stability Study

    Science.gov (United States)

    Sirmons, T.; Cooper, M.; Douglas, G.

    2017-01-01

    NASA has established the goal of traveling beyond low-Earth orbit and extending manned exploration to Mars. The length of proposed Mars missions and the lack of resupply missions increases the importance of nutritional content in the food system, which will need a five-year shelf life. The purpose of this research is to assess the stability of vitamin supplementation in traditionally processed spaceflight foods. It is expected that commercially available fortification nutrients will remain stable through a long duration exploration mission at sufficient levels if compatible formulation, processing, and storage temperatures are achieved. Five vitamins (vitamin E, vitamin K, pantothenic acid, folic acid, and thiamin) were blended into a vitamin premix (DSM, Freeport, TX) such that the vitamin concentration per serving equaled 25% of the recommended daily intake after two years of ambient storage. Four freeze-dried foods (Scrambled Eggs, Italian Vegetables, Potatoes Au Gratin, Noodles and Chicken) and four thermo-stabilized foods (Curry Sauce with Vegetables, Chicken Noodle Soup, Grilled Pork Chop, Rice with Butter) were produced, with and without the vitamin premix, to assess the impact of the added fortification on color and taste and to determine the stability of supplemental vitamins in spaceflight foods. The addition of fortification to spaceflight foods did not greatly alter the organoleptic properties of most products. In most cases, overall acceptability scores remained above 6.0 (minimum acceptable score) following six months and one year of low-temperature storage. Likewise, the color of fortified products appears to be preserved over one year of storage. The only exceptions were Grilled pork Chop and Chicken Noodle Soup whose individual components appeareddegrade rapidly over one year of storage. Finally, most vitamins appeared to be stable during long-term storage. The only exception was thiamin, which degraded rapidly during the first year of storage at

  13. Food Fortification Stability Study

    Science.gov (United States)

    Abdulmalik, T. O.; Cooper, M. R.; Douglas, G. L.

    2015-01-01

    NASA has established the goal of traveling beyond low-Earth orbit and extending manned exploration to Mars. The extended length of a Mars mission, along with the lack of resupply missions increases the importance of nutritional content in the food system. The purpose of this research is to assess the stability of vitamin supplementation in traditionally processed spaceflight foods. It is expected that commercially available fortificants will remain stable through long-duration missions if proper formulation, processing, and storage temperatures are all achieved. Five vitamins (vitamin E, vitamin K, pantothenic acid, folic acid, and thiamin) were blended into a vitamin premix (DSM, Freeport, TX); premixes were formulated to be compatible with current processing techniques (retort or freeze-dried), varied water activities (high or low), and packaging material. The overall goal of this process is to provide 25% of the recommended daily intake of each vitamin (per serving), following processing and two years of ambient storage. Four freeze-dried foods (Scrambled Eggs, Italian Vegetables, Potatoes Au Gratin, Noodles and Chicken) and four thermostabilized foods (Curry Sauce with Vegetables, Chicken Noodle Soup, Grilled Pork Chop, Rice with Butter) were produced (with and without the vitamin premix), to assess the impact of the added fortificant on color and taste, and to determine the stability of supplemental vitamins in spaceflight foods. The use of fortification in spaceflight foods appears to be a plausible mitigation step to inadequate nutrition. This is due to the ease of vitamin addition as well as the sustainability of the premixes through initial processing steps. Postprocessing analysis indicated that vitamin fortification with this premix did not immediately impact organoleptic properties of the food. At this stage, the largest hurdle to fortification is the preciseness to which vitamins can be added; the total amount of vitamins required for production is 10

  14. Isotopic hydrological studies carried out on the Karst water system

    International Nuclear Information System (INIS)

    Longinelli, A.

    1988-03-01

    The isotopic composition and temperature of many karst springs in the area of Trieste (Italy) have been measured for about three and a half years. During the same period the isotopic composition of precipitation has also been systematically studied. The isotopic composition of springs generally shows variations which are markedly shifted in time with respect to those of precipitation. In most of the springs the heavy isotope contents of winter samples are the highest of the whole year. On the contrary, summer samples normally show quite negative δ-values, the most negative of which often refer to the last summer months. The data obtained are explained in terms of variable mixing of waters from two main reservoirs. The less negative reservoir (in terms of δ) is recharged by ''local'' meteoric waters falling on the westernmost section of the karst area whose mean elevation is about 400 m a.s.l. The most negative reservoir is probably recharged by meteoric waters falling on the Slovenian section of the karst, whose mean elevation is about 800-900 m a.s.l. At least in the case of some of the northernmost karst springs, it is likely that a third water system, basically fed by the Isonzo river, flowing north of the karst area, could interfere with the previously mentioned reservoirs, partially controlling the outflow of some springs. 6 figs

  15. A study on stability of rotating magnets

    International Nuclear Information System (INIS)

    Higuchi, N.; Kaiho, K.; Ishii, I.

    1996-01-01

    Superconducting power generators are being developed in Japan, as a part of a R and D program on energy technology, the New Sunshine Project. In this development, national laboratories are taking a role of fundamental studies to contribute to the R and D being carried out mainly by the manufacturers involved in a research association, Super-GM. Stabilities of magnets in a high gravitational field up to 2,000 G are discussed, based upon the experimental results of forced quench tests in a set of rotating magnets, in order to establish the stability design criterion of field windings of superconducting generators. Relations of propagation velocities, recovery currents, minimum quench energy and heat transfer characteristics are studied, a good agreement between the experimental results and a theory confirmed the improvement of magnet stability in a high gravitational field because of the enhanced heat transfer characteristics

  16. Avisalmvac: evaluation studies of stability and toxicity

    Directory of Open Access Journals (Sweden)

    Daniela Botus,

    2008-12-01

    Full Text Available In Pasteur Institute laboratories there was developed AVISALMVAC, a vaccine against avian Salmonella, a biological product that contains S. enteritidis and S. typhimurium bacterin, with oil adjuvant. This paper presents the results of the studies regarding the stability and toxicity evaluation of this vaccine stored under conditions recommended by the manufacturer (2-80C at the end of the period of validity. The vaccine stability was assessed by serological and histopathological analysis of samples from SPF chickens vaccinated with the product at the end of the period of validity. The study of Avisalmvac toxicity was carried out by inoculation of the product or its components on Vero cell monolayer, and the effects were microscopically recorded or by MTT test, applied at 6 days post-inoculation. Antibody titers recorded at 2 and 3 weeks post vaccination demonstrated the vaccine ability (used after an year since manufacture to induce synthesis of specific antibodies and therefore, the product stability was proven. Histopathological examinations carried out on samples taken at 18 days post vaccinationfrom the vaccination site (skeletal muscle and skin and spleen, did not show any lesions associated to vaccination with Avisalmvac. The cytotoxicity analysis made by inoculating the vaccine or its components on Vero cell monolayer and the microscopic examination did not record visible cytopathic effects for any vaccine dilutions or vaccine components. The cell metabolism evaluation by MTT assay made at 6 days after vaccine/vaccine components inoculation on Vero monolayer, shown the ability of the vaccine and oil adjuvant to stimulate cell metabolism, and a certain degree of toxicity / inhibition of dehydrogenase metabolism associated to one of emulsifier but at dilutions higher than those used in the vaccine formula.

  17. Impact of Flexibility Options on Grid Economic Carrying Capacity of Solar and Wind: Three Case Studies

    Energy Technology Data Exchange (ETDEWEB)

    Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Novacheck, Joshua [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jorgenson, Jennie [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Connell, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-12-01

    In this study, we attempt to quantify the benefits of various options of grid flexibility by measuring their impact on two measures: economic carrying capacity and system costs. Flexibility can increase economic carrying capacity and reduce overall system costs. In some cases, options that provide a limited increase in economic carrying capacity can provide significant operational savings, thus demonstrating the need to evaluate flexibility options using multiple metrics. The value of flexibility options varies regionally due to different generation mixes and types of renewables. The more rapid decline in PV value compared to wind makes PV more dependent on adding flexibility options, including transmission and energy storage.

  18. Stability of nanofluids: Molecular dynamic approach and experimental study

    International Nuclear Information System (INIS)

    Farzaneh, H.; Behzadmehr, A.; Yaghoubi, M.; Samimi, A.; Sarvari, S.M.H.

    2016-01-01

    Highlights: • Nanofluid stability is investigated and discussed. • A molecular dynamic approach, considering different forces on the nanoparticles, is adopted. • Stability diagrams are presented for different thermo-fluid conditions. • An experimental investigation is carried out to confirm the theoretical approach. - Abstract: Nanofluids as volumetric absorbent in solar energy conversion devices or as working fluid in different heat exchangers have been proposed by various researchers. However, dispersion stability of nanofluids is an important issue that must be well addressed before any industrial applications. Conditions such as severe temperature gradient, high temperature of heat transfer fluid, nanoparticle mean diameters and types of nanoparticles and base fluid are among the most effective parameters on the stability of nanofluid. A molecular dynamic approach, considering kinetic energy of nanoparticles and DLVO potential energy between nanoparticles, is adopted to study the nanofluid stability for different nanofluids at different working conditions. Different forces such as Brownian, thermophoresis, drag and DLVO are considered to introduce the stability diagrams. The latter presents the conditions for which a nanofluid can be stable. In addition an experimental investigation is carried out to find a stable nanofluid and to show the validity of the theoretical approach. There is a good agreement between the experimental and theoretical results that confirms the validity of our theoretical approach.

  19. Studies on solid-state physics carried out with the Saclay reactor (1962)

    International Nuclear Information System (INIS)

    Herpin, A.

    1962-01-01

    This paper deals only with solid-state physics experiments carried out on outgoing beams: rather than giving a general review of the work performed, if refers to only a few of the most important studies or those nearest completion. These are being made with the experimental beams of the two Saclay reactors EL-2, with a central flux of 10 13 n/cm 2 , and - since 1958 - EL-3, whose central flux is equal ta 10 14 n/cm 2 . The experiments are being carried out by two separate groups of physicists, employing different techniques, namely neutron diffraction using a crystal spectrometer, and inelastic scattering using a time-of-flight spectrometer. (author) [fr

  20. A Pilot Study On A Moment Carrying Beam-column Connection For Precast Structures

    OpenAIRE

    Kaplan, Vedat

    2010-01-01

    In this study, a moment carrying beam-column connection detail for precast structures has been investigated in the experimental and analytical manner. The 1/2 scaled beam-column test specimen is representing a real exterior precast connection detail. The cast-in-situ welded connection is applied at bottom face of the beams and additional re-bars and cast-in-situ concrete is introduced at the upper part of the beams. The experimental study is conducted in the form of varying beam top diplaceme...

  1. Ecological carrying capacity assessment of diving site: A case study of Mabul Island, Malaysia.

    Science.gov (United States)

    Zhang, Li-Ye; Chung, Shan-Shan; Qiu, Jian-Wen

    2016-12-01

    Despite considered a non-consumptive use of the marine environment, diving-related activities can cause damages to coral reefs. It is imminent to assess the maximum numbers of divers that can be accommodated by a diving site before it is subject to irreversible deterioration. This study aimed to assess the ecological carrying capacity of a diving site in Mabul Island, Malaysia. Photo-quadrat line transect method was used in the benthic survey. The ecological carrying capacity was assessed based on the relationship between the number of divers and the proportion of diver damaged hard corals in Mabul Island. The results indicated that the proportion of diver damaged hard corals occurred exponentially with increasing use. The ecological carrying capacity of Mabul Island is 15,600-16,800 divers per diving site per year at current levels of diver education and training with a quarterly threshold of 3900-4200 per site. Our calculation shows that management intervention (e.g. limiting diving) is justified at 8-14% of hard coral damage. In addition, the use of coral reef dominated diving sites should be managed according to their sensitivity to diver damage and the depth of the reefs. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Study of information-orientation carry-out plan in energy sector

    Energy Technology Data Exchange (ETDEWEB)

    Kang, T W [Korea Energy Economics Institute, Euiwang (Korea, Republic of)

    1998-04-01

    Carrying out an information-orientation plan in the energy sector is indispensable if Korea is to survive in this unlimited competition age and global management system. It is also for maximizing the management efficiency of national energy resources as well as increasing the development of related industries and national welfare. The management of the energy resources sector of Korea, which is becoming diversified escaping from the past simple quantitative management of supplier-orientation, requires versatile and ample high-class information management system and high-level decision support system. In order to satisfy these requests, this study investigated and analyzed overall policies of the energy sector for carrying out information-orientation, neighborhood environment, organizational chart, information transfer method, the current condition of information-orientation, problems and improvements, demand of information-orientation of the future, and also reviewed the information-orientation status of advanced countries. Based on these, an information-orientation carryout plan in the energy sector is broken into three stages of `establishment of information transfer system`, `development of database`, and `establishment of decision support system` and presented per detailed work. It advised manpower, equipment and budget implementation plan, and a development schedule plan required for carrying out information-orientation as well as overall environmental build-up, and policy recommendation for the successful implementation of information-orientation. 24 refs., 27 figs., 15 tabs.

  3. Study of the 137Cs Stabilizer Source

    Directory of Open Access Journals (Sweden)

    GAO Yan;WANG Yan-ling;XU Zhi-jian;XU Liang;REN Chun-xia;TAN Xiao-ming;CUI Hong-qi

    2014-02-01

    Full Text Available The attenuation laws of the Cesium -137 γ-ray penetrating the ceramic core、stainless steel and tungsten steel were studied. The radioactivity of the 137Cs stabilizer source was determined through the surface dose rate of 137Cs stabilizer sources. In addition, the adsorption properties of the ceramic core were studied to improve the stability of the output rate, and established a production line. The application results showed that the output rate of ray source was accurate and was of a good consistency. At present, the source had been used in logging lithology, and achieved the realization of domestic product.

  4. Carrying Capacity

    DEFF Research Database (Denmark)

    Schroll, Henning; Andersen, Jan; Kjærgård, Bente

    2012-01-01

    A spatial planning act was introduced inIndonesia 1992 and renewed in 2008. It emphasised the planning role of decentralised authorities. The spatial planning act covers both spatial and environmental issues. It defines the concept of carrying capacity and includes definitions of supportive....../cities. Four different sectors (water, food production, waste, and forests) were selected as core areas for decentralised spatial planning. Indicators for SCC and ACC were identified and assessed with regard to relevance and quantifiability. For each of the indicators selected, a legal threshold or guiding...... was introduced inIndonesia 1992 and renewed in 2008. It emphasised the planning role of decentralised authorities. The spatial planning act covers both spatial and environmental issues. It defines the concept of carrying capacity and includes definitions of supportive carrying capacity (SCC) and assimilative...

  5. Impact of Flexibility Options on Grid Economic Carrying Capacity of Solar and Wind: Three Case Studies

    Energy Technology Data Exchange (ETDEWEB)

    Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Novacheck, Joshua [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jorgenson, Jennie [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Connell, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-12-01

    In this study, we attempt to quantify the benefits of various options of grid flexibility by measuring their impact on two measures: economic carrying capacity and system costs. Flexibility can increase ECC and reduce overall system costs. In some cases, options that provide a limited increase in ECC can provide significant operational savings, thus demonstrating the need to evaluate flexibility options using multiple metrics. The value of flexibility options varies regionally due to different generation mixes and types of renewables. The more rapid decline in PV value compared to wind makes PV more dependent on adding flexibility options, including transmission and energy storage.

  6. Studies on esterase isozymes and mycelium growth speed of ganoderma lucidum carried by Shenzhou spaceship

    International Nuclear Information System (INIS)

    Qi Jianjun; Chen Xiangdong; Lan Jin

    2002-01-01

    The esterase isozymes and mycelium growth speed of four Ganoderma lucidum strains carried by Shenzhou spaceship were studied. The results showed that different effects occurred to esterase and mycelium growth speed. The SX, S3 esterase band had changed compared with their control CX, C3, respectively, but there were no differences between SH and CH, S4 and C4. The growth speed of S4 strain was faster than its control C4, SX strain lower than its control CX, and there were no difference between SH and CH, S3 and C3

  7. Research at ITER towards DEMO: Specific reactor diagnostic studies to be carried out on ITER

    Science.gov (United States)

    Krasilnikov, A. V.; Kaschuck, Y. A.; Vershkov, V. A.; Petrov, A. A.; Petrov, V. G.; Tugarinov, S. N.

    2014-08-01

    In ITER diagnostics will operate in the very hard radiation environment of fusion reactor. Extensive technology studies are carried out during development of the ITER diagnostics and procedures of their calibration and remote handling. Results of these studies and practical application of the developed diagnostics on ITER will provide the direct input to DEMO diagnostic development. The list of DEMO measurement requirements and diagnostics will be determined during ITER experiments on the bases of ITER plasma physics results and success of particular diagnostic application in reactor-like ITER plasma. Majority of ITER diagnostic already passed the conceptual design phase and represent the state of the art in fusion plasma diagnostic development. The number of related to DEMO results of ITER diagnostic studies such as design and prototype manufacture of: neutron and γ-ray diagnostics, neutral particle analyzers, optical spectroscopy including first mirror protection and cleaning technics, reflectometry, refractometry, tritium retention measurements etc. are discussed.

  8. Research at ITER towards DEMO: Specific reactor diagnostic studies to be carried out on ITER

    International Nuclear Information System (INIS)

    Krasilnikov, A. V.; Kaschuck, Y. A.; Vershkov, V. A.; Petrov, A. A.; Petrov, V. G.; Tugarinov, S. N.

    2014-01-01

    In ITER diagnostics will operate in the very hard radiation environment of fusion reactor. Extensive technology studies are carried out during development of the ITER diagnostics and procedures of their calibration and remote handling. Results of these studies and practical application of the developed diagnostics on ITER will provide the direct input to DEMO diagnostic development. The list of DEMO measurement requirements and diagnostics will be determined during ITER experiments on the bases of ITER plasma physics results and success of particular diagnostic application in reactor-like ITER plasma. Majority of ITER diagnostic already passed the conceptual design phase and represent the state of the art in fusion plasma diagnostic development. The number of related to DEMO results of ITER diagnostic studies such as design and prototype manufacture of: neutron and γ–ray diagnostics, neutral particle analyzers, optical spectroscopy including first mirror protection and cleaning technics, reflectometry, refractometry, tritium retention measurements etc. are discussed

  9. Research at ITER towards DEMO: Specific reactor diagnostic studies to be carried out on ITER

    Energy Technology Data Exchange (ETDEWEB)

    Krasilnikov, A. V.; Kaschuck, Y. A.; Vershkov, V. A.; Petrov, A. A.; Petrov, V. G.; Tugarinov, S. N. [Institution Project center ITER, Moscow (Russian Federation)

    2014-08-21

    In ITER diagnostics will operate in the very hard radiation environment of fusion reactor. Extensive technology studies are carried out during development of the ITER diagnostics and procedures of their calibration and remote handling. Results of these studies and practical application of the developed diagnostics on ITER will provide the direct input to DEMO diagnostic development. The list of DEMO measurement requirements and diagnostics will be determined during ITER experiments on the bases of ITER plasma physics results and success of particular diagnostic application in reactor-like ITER plasma. Majority of ITER diagnostic already passed the conceptual design phase and represent the state of the art in fusion plasma diagnostic development. The number of related to DEMO results of ITER diagnostic studies such as design and prototype manufacture of: neutron and γ–ray diagnostics, neutral particle analyzers, optical spectroscopy including first mirror protection and cleaning technics, reflectometry, refractometry, tritium retention measurements etc. are discussed.

  10. Summaries of studies carried out in the NKS/BOK-2 project. Technical report

    International Nuclear Information System (INIS)

    Palsson, S.E.

    2002-12-01

    Summaries of studies carried out in the NKSBOK-2 project, Radiological and Environmental Consequences. The structure of the project as such is described in NKS-64, Radiological and Environmental Consequences - Final Report of the Nordic Nuclear Safety Research Project BOK-2. That report also includes compilations based on the summaries presented in this report. The project was carried out 1998-2001 with participants from all the Nordic countries. Representatives from the Baltic States were also invited to some of the meetings and seminars. The project consisted of work on terrestrial and marine radioecology and had a broad scope in order to enable participation of research groups with various fields of interest. The topics included improving assessment of old and recent fallout, use of radionuclides as tracers in Nordic marine areas, improving assessment of internal doses and use of mass spectrometry in radioecology. This report is a compilation of summaries from each research group, 32 papers in all, and gives references to papers published in scientific journals. Some of the studies have been described previously, at least to some degree, in NKS-70, Proceedings of the 8 th Nordic Seminar on Radioecology, 25-28 February 2001, Rovaniemi, Finland. (au)

  11. The study of environmental carrying capacity for sustainable tourism in Telaga Warna Telaga Pengilon Nature Park, Dieng Plateu, Central Java

    Science.gov (United States)

    Melat Aryasa, Alexander; Nur Bambang, Azis; Muhammad, Fuad

    2017-06-01

    The increasing in quantity of the tourists visiting Telaga Warna Telaga Pengilon Nature Park, Dieng Plateau, Central Java, can cause a potential threat toward the conservation sustainability of the tourist attraction and the surrounding area. The utilization of conservation area for tourist attraction has to be carried out based on the principal of Environmental Carrying Capacity so that it will not affect the ecosystem. This study aims to determine the value of Telaga Warna Telaga Pengilon Nature Park environmental carrying capacity as a conservation area used for tourism activities. The environmental carrying capacities calculated in this study were physical carrying capacity, real carrying capacity, and effective carrying capacity. Results of this research show that the physical carrying capacity of The Telaga Warna Telaga Pengilon Nature Park was 31,302 visitors, the real capacity was 869 visitors/day and the effective carrying capacity was 579 visitors/day. Thus, the sustainable tourism development strategy is needed to manage the everlasting natural resources.

  12. Study on constructing retroviral vector carrying HSV-tk gene and its antitumor effect in vitro

    International Nuclear Information System (INIS)

    Pan Yujun; Hui Guozhen; Hu Jin

    1997-01-01

    The author reports the construction of retroviral vector PLNTK carrying HsV-tk gene driven by pgk promoter and the successful transferring into cells NBA 2 and SHG 44 respectively as shown by PCR. In vitro study, HSV-tk-expressed-cells prove to be more sensitive to ACV than parent cells. The sensitivity of SHGLNTK and NBALNTK to ACV is 1000 and 500 times that of their parent cells respectively. 3 H-TdR test demonstrated that the DNA replication in gene modified cells is more suppressed than that of parent cells when treated with ACV. Moreover, the ACV sensitivity level of parent cells is enhanced when co-cultured with gene modified cells, which suggests the existence of the bystander effect

  13. Synthesis of the safety studies carried out on the GFR2400

    Energy Technology Data Exchange (ETDEWEB)

    Bertrand, F., E-mail: frederic.bertrand@cea.fr [CEA, DEN, DER, F-13108, Saint Paul-lez-Durance (France); Bassi, C. [CEA, DEN, DER, F-13108, Saint Paul-lez-Durance (France); Bentivoglio, F. [CEA, DEN, DM2S, F-38054, Grenoble (France); Audubert, F. [CEA, DEN, DEC, F-13108, Saint Paul-lez-Durance (France); Gueneau, C. [CEA, DEN, DPC, F-91191, Gif-sur-yvette (France); Rimpault, G. [CEA, DEN, DER, F-13108, Saint Paul-lez-Durance (France); Journeau, C. [CEA, DEN, DTN, F-13108, Saint Paul-lez-Durance (France)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Insights from accident studies and PSA have consolidated GFR2400 design. Black-Right-Pointing-Pointer Safety margins are adequate for design basis accidents. Black-Right-Pointing-Pointer Core cooling strategy is reinforced by use of PCS for frequent events. Black-Right-Pointing-Pointer Prevention of core degradation is shown in challenging hypothetic situations. Black-Right-Pointing-Pointer It is shown that most of severe accidents can be managed despite limited test data. - Abstract: The present paper is dedicated to the synthesis of the safety studies carried out on the 2400 MWth gas-cooled fast reactor (GFR2400) concept developed at CEA. The analysis of the reference design basis accidents investigated up to now, has shown margins up to the acceptance criteria, equal at least to 300 Degree-Sign C for the category 3 situations and larger than 100 Degree-Sign C for the category 4 situations. The dimensioning of the decay heat removal (DHR) loops and of the power conversion system (PCS) loops has been shown adequate even for bounding degraded situations including multiple failures. Furthermore, in the following part of the paper, it is shown how the main insights provided by a level 1 probabilistic safety assessment (PSA) carried out at an early stage of the design, have led to reinforce the reliability of the DHR function in high pressure conditions by using the PCS as the first mean to cool the core; in the same time, on the basis of a combination of deterministic augments and of PSA results, a design simplification process has led to add a low pressure DHR loop to replace a high pressure DHR loop. The last section is dedicated to prevention and preliminary study of severe accidents (SA). Four SA families have been identified depending on the dynamics and on the scale of the considered accident. The possibility to prevent core degradation by using an adapted accident management (nitrogen injection, use of PCS loops) has

  14. Review of annual radioecological studies carried out since 1991 in the French nuclear power plants environment

    International Nuclear Information System (INIS)

    Duffa, C.; Gontier, G.; Renaud, P.

    2004-01-01

    Since 1991, the IRSN carries out annual radioecological studies in the environment of the French Nuclear Power Plants. More than 5,000 samples, collected in terrestrial and aquatic ecosystems around the 20 studied plants, have been analysed by low-level gamma spectrometry. This paper presents the main goals and methods for such studies, and the lessons learnt from 11 years results. The French NPP routine atmospheric releases do not lead to detectable radioactive inputs into their surroundings. For this reason, IRSN decided to reduce the number of analysis concerning terrestrial samples since 2000. On the other hand, NPP liquid discharges into rivers are responsible for the presence of low 60 Co, 58 Co, 110m Ag and 54 Mn activities and significant difference in 137 Cs/ 134 Cs activity ratios measured in aquatic compartments. Radioactive discharges of artificial gamma emitters are also detectable in the Channel marine environment around NPP. Nevertheless, this influence is often concealed by radionuclides released by COGEMA-La Hague nuclear reprocessing plant. Beyond important evaluations concerning the presence of artificial radionuclides in NPP's environment, studies conducted since 1991 give us an important database that can be used for a better knowledge of transfers and distribution of radioactivity through the environment. (author)

  15. [Study on composite stabilization of arsenic (As) contaminated soil].

    Science.gov (United States)

    Wang, Hao; Pan, Li-xiang; Zhang, Xiang-yu; Li, Meng; Song, Bao-hua

    2013-09-01

    Since the contaminated soil may contain various kinds of heavy metals, use of single chemical reagent leads to poor remediation and high cost. In this study, soil containing As, Zn, Cd was sampled, and different reagents were selected to carry out the rapid stabilization of contaminated soil. The TCLP (toxicity characteristic leaching procedure) was used to evaluate the leachate toxicity of heavy metals and the results indicated that calcium-containing, sulphur-containing and iron-containing reagents had good performance in reducing the metal mobility. The stabilization efficiency of the six reagents tested ranked in the order of CaO > Na2S > organic sulfur > Chitosan > FeSO4 > (C2H5)2NCS2Na. Two types of reagents (six reagents) were combined based on the target properties of different reagents and the stabilization efficiency was evaluated and analyzed. The results indicated that the composite reagents had higher stabilization efficiency: the efficiency of 3% FeSO4 + 5% CaO was 81.7%, 97.2% and 68.2% for As, Cd and Zn, respectively, and the efficiency of 3% CaO + 5% organic sulfur was 76.6%, 95.7% and 93.8% for these three metals, respectively. Speciation analysis was carried out in this study and the results suggested that it was the change of metals from the exchangeable state to the reduction (for inorganic reagent) or oxidation state (for organic reagent) that caused the soil stabilization and the degree of change determined the stabilization efficiency.

  16. Stability studies of oxytetracycline in methanol solution

    Science.gov (United States)

    Wang, Wei; Wu, Nan; Yang, Jinghui; Zeng, Ming; Xu, Chenshan; Li, Lun; Zhang, Meng; Li, Liting

    2018-02-01

    As one kind of typical tetracycline antibiotics, antibiotic residues of oxytetracycline have been frequently detected in many environmental media. In this study, the stability of oxytetracycline in methanol solution was investigated by high-performance liquid chromatography combined with UV-vis (HPLC-UV). The results show that the stability of oxytetracycline in methanol solution is highly related to its initial concentration and the preserved temperature. Under low temperature condition, the solution was more stable than under room temperature preservation. Under the same temperature preservation condition, high concentrations of stock solutions are more stable than low concentrations. The study provides a foundation for preserving the oxytetracycline-methanol solution.

  17. Carry-Over Effects on the Annual Cycle of a Migratory Seabird: an Experimental Study

    OpenAIRE

    Fayet, Annette; Freeman, R; Shoji, A; Kirk, HL; Padget, O; Perrins, CM; Guilford, T

    2016-01-01

    1. Long-lived migratory animals must balance the cost of current reproduction with their own condition ahead of a challenging migration and future reproduction. In these species, carry-over effects, which occur when events in one season affect the outcome of the subsequent season, may be particularly exacerbated. However, how carry-over effects influence future breeding outcomes and whether (and how) they also affect behaviour during migration and wintering is unclear. 2. Here we inve...

  18. A Study on Lean Manufacturing Practice Carried Out for Axle Housing Plant

    Directory of Open Access Journals (Sweden)

    Rishi J. P.

    2018-01-01

    Full Text Available Lean Manufacturing is a way to deal with the elimination of waste through persistent change within the system. The assembling units in India should likewise hope to take its preferences. The Industries are energetically following the Lean assembling strategies to reduce waste and cost. The present work is the study of a manufacturing process for axle housing and to decide how Lean manufacturing process carried out for axle housing plant to improve productivity. The new shot peening machine was installed in a heat treatment plant of a housing line in an automobile rear axle assembly plant and material handling time from storage to this new machine was more and this increased lead time subsequently. To reduce this Kaizens technique was employed and a direct gravity conveyor was chosen and installed between two work stations and the part was directly fed to the new machine installed and this reduces the material handling time considerably. A cost analysis was done to realize the benefits of implementing this lean technique. Therefore reducing lead time and increasing productivity is the Prime benefits of lean manufacturing practices like lean assembly.

  19. AECL's excavation stability study - summary of observations

    International Nuclear Information System (INIS)

    Read, R.S.; Chandler, N.A.

    1996-05-01

    The Excavation Stability Study (ESS) was conducted at the 420 Level of the Underground Research Laboratory (URL) to evaluate stability and the extent of excavation damage in tunnels as a function of tunnel geometry and orientation, geology, and excavation method. A series of ovaloid and circular openings were used to achieve different boundary stress levels and near-field stress distributions to assess the effect of tunnel geometry on damage development. Several of these openings had sections in both granite and granodiorite lithology, providing a comparison of damage in rock types with different strength characteristics. Damage around circular tunnels (one excavated by drill-and-blast, the other by mechanical means) was also investigated. The study.showed that mechanically stable openings can be excavated in the most adverse stress conditions at the 420 Level of the URL. In addition, it was shown that tunnel stability is sensitive to tunnel shape, variations in geology, and to some extent, the excavation method. Findings of the study are relevant in developing design criteria, and in assessing the feasibility of constructing large ovaloid openings in adverse stress conditions. This report summarizes the preliminary observations related to tunnel stability and excavation damage. (author). 8 refs., 7 tabs., 23 figs

  20. Modelling of carrying capacity in National Park - Fruška Gora (Serbia case study

    Directory of Open Access Journals (Sweden)

    Vujko Aleksandra

    2017-03-01

    Full Text Available Negative effects of tourism development in a destination are usually the consequence of the high concentration of tourists, accommodation facilities and the activities that are practiced in a relatively restricted area. One of the most important measures to protect the areas is to calculate the maximum number of tourists that can simultaneously reside in a region, i.e. the determination of the carrying capacity. This paper outlines a method for determining carrying capacity based on zoning of environmental resources and zoning within a region. The paper argues for a return to the idea of identifying maximum appropriate number of users. The main hypothesis of the paper is based on the statement that the development of tourism in Fruška Gora (Mountain National Park in Northern Serbia must be in accordance with the basic principles of sustainability, including the determination of carrying capacity. The main research goal was to show the opinion of local residents about the uncontrolled development of tourism, and to determine the carrying capacity in four sports and recreational zones of the mountain. The carrying capacity of the area is calculated by Lavery and Stanev formulas.

  1. Microearthquake studies in Egypt carried out by the geological survey of Egypt

    Science.gov (United States)

    Boulos, Fouad K.; Morgan, Paul; Toppozada, Tousson R.

    1987-07-01

    Extensive microearthquake studies have been conducted in Egypt as a joint project between scientists from the Egyptian Geological Survey and Mining Authority (EGSMA) and U.S. scientists. At this stage, a great part of the data has been analyzed and two intensively active areas have been located: one in the Abu Dabbab area of the Eastern Desert, the second at the mouth of the Gulf of Suez near Gubal Island (Daggett et al., 1980). Both sites have been reported to be the epicenters of large earthquakes in 1955 and 1969, respectively. A few scattered earthquakes have also been located in the northern part of the Red Sea, some of which lie along its median axis (Daggett et al., 1986) adding to evidence for the medial opening of the northern Red Sea. After the occurrence of an earthquake (M = 5.5) in the Aswan region on 14 November 1981, continuous recording of the many aftershocks was carried out by EGSMA for about seven months from December 1981 to July 1982, when the temporary network was replaced by a network of telemetered seismographs installed and operated by Helwan Institute of Astronomy and Geophysics in cooperation with scientists from Lamont and Doherty Geological Observatory (LDGO). The majority of epicenters are concentrated in the vicinity of G. Marawa about 65 km upstream of Aswan Dam, along the E-W Kalabsha fault. The observed focal mechanism is consistent with a right-lateral strike-slip motion on the Kalabsha fault. Analysis of Aswan microearthquakes has been done by EGSMA in cooperation with scientists from California Division of Mines and Geology (CDMG).

  2. A Case Study in Carry Trade and Cross Pair Allegiance Switching, Pre and Post 2008

    OpenAIRE

    Brian Twomey

    2015-01-01

    EUR/USD, USD/JPY and the position of EUR/JPY was investigated in this paper using regression analysis with the overarching question where EUR/JPY sits in relation to both pairs and its position in terms of a carry trade. What was determined was EUR/JPY switches allegiance period to period. The carry trade premise is to borrow a low interest rate currency and lend in a high interest rate currency. The low interest rate currency becomes the fund currency while the high interest rate currency be...

  3. Studies of beam position monitor stability

    International Nuclear Information System (INIS)

    Tenenbaum, P.

    1998-05-01

    The authors present the result s from two studies of the time stability between the mechanical center of a beam position monitor and its electrical/electronic center. In the first study, a group of 93 BPM processors was calibrated via Test Pulse Generator once per hour in order to measure the contribution of the readout electronics to offset drifts. In the second study, a triplet of stripline BPMs in the Final Focus Test Beam, separated only by drift spaces, was read out every 6 minutes during 1 week of beam operation. In both cases offset stability was observed to be on the order of microns over time spans ranging from hours to days, although during the beam study much worse performance was also observed. Implications for the beam position monitor system of future linear collider systems are discussed

  4. Decommissioning and decontamination (burial ground stabilization) studies

    International Nuclear Information System (INIS)

    Cline, J.F.

    1980-01-01

    The decommissioning and decontamination of retired Hanford facilities and the future use of surrounding landscapes require isolation of contaminated wastes from the biosphere. Burial ground stabilization studies were conducted to determine the effectiveness of physical barriers for isolating contaminated wastes in shallow-land burial sites from plants and animals. This study was undertaken to determine the effectiveness of using a layer of loose rock between the waste and the surface soil covering to prevent both plant root and animal penetrations

  5. Results of the Study of Helminths-Carrying as a Comorbidity in Children with Herpetic Stomatitis

    Directory of Open Access Journals (Sweden)

    E.S. Suerkulov

    2016-09-01

    Full Text Available The paper analyzes the helminths-carrying in children with herpetic stomatitis according to the data of the department of maxillofacial surgery of the National center of mother and child welfare, and determines the relationship of oral diseases with disorders of various parts of the gastrointestinal tract.

  6. Preliminary Slope Stability Study Using Slope/ W

    International Nuclear Information System (INIS)

    Nazran Harun; Mohd Abd Wahab Yusof; Kamarudin Samuding; Mohd Muzamil Mohd Hashim; Nurul Fairuz Diyana Bahrudin

    2014-01-01

    Analyzing the stability of earth structures is the oldest type of numerical analysis in geotechnical engineering. Limit equilibrium types of analyses for assessing the stability of earth slopes have been in use in geotechnical engineering for many decades. Modern limit equilibrium software is making it possible to handle ever-increasing complexity within an analysis. It is being considered as the potential method in dealing with complex stratigraphy, highly irregular pore-water pressure conditions, various linear and nonlinear shear strength models and almost any kind of slip surface shape. It allows rapid decision making by providing an early indication of the potential suitability of sites based on slope stability analysis. Hence, a preliminary slope stability study has been developed to improve the capacity of Malaysian Nuclear Agency (Nuclear Malaysia) in assessing potential sites for Borehole Disposal for Disused Sealed Radioactive Sources. The results showed that geometry of cross section A-A ' , B-B ' , C-C ' and D-D ' achieved the factor of safety not less than 1.4 and these are deemed acceptable. (author)

  7. Carry-over effects on the annual cycle of a migratory seabird: an experimental study.

    Science.gov (United States)

    Fayet, Annette L; Freeman, Robin; Shoji, Akiko; Kirk, Holly L; Padget, Oliver; Perrins, Chris M; Guilford, Tim

    2016-11-01

    Long-lived migratory animals must balance the cost of current reproduction with their own condition ahead of a challenging migration and future reproduction. In these species, carry-over effects, which occur when events in one season affect the outcome of the subsequent season, may be particularly exacerbated. However, how carry-over effects influence future breeding outcomes and whether (and how) they also affect behaviour during migration and wintering is unclear. Here we investigate carry-over effects induced by a controlled, bidirectional manipulation of the duration of reproductive effort on the migratory, wintering and subsequent breeding behaviour of a long-lived migratory seabird, the Manx shearwater Puffinus puffinus. By cross-fostering chicks of different age between nests, we successfully prolonged or shortened by ∼25% the chick-rearing period of 42 breeding pairs. We tracked the adults with geolocators over the subsequent year and combined migration route data with at-sea activity budgets obtained from high-resolution saltwater-immersion data. Migratory behaviour was also recorded during non-experimental years (the year before and/or two years after manipulation) for a subset of birds, allowing comparison between experimental and non-experimental years within treatment groups. All birds cared for chicks until normal fledging age, resulting in birds with a longer breeding period delaying their departure on migration; however, birds that finished breeding earlier did not start migrating earlier. Increased reproductive effort resulted in less time spent at the wintering grounds, a reduction in time spent resting daily and a delayed start of breeding with lighter eggs and chicks and lower breeding success the following breeding season. Conversely, reduced reproductive effort resulted in more time resting and less time foraging during the winter, but a similar breeding phenology and success compared with control birds the following year, suggesting that

  8. MODELLING STUDIES ON THE USE OF ALUMINIUM ALLOYS IN LIGHTWEIGHT LOAD-CARRYING CRANE STRUCTURES

    Directory of Open Access Journals (Sweden)

    Damian GĄSKA

    2016-09-01

    Full Text Available The article presents the results of numerical analysis whose aim was to compare the basic dynamic and strength parameters of lightweight load-carrying crane structures made of aluminium alloys and steel. The analysis covered the typical construction of workshop cranes with a span of 3 to 5 meters, girders in the form of an I-beam and maximum load capacities amounting to 5 tons. The values of stresses, deflections and natural frequencies were compared and then matched with the masses of the various structures. In the simulation a girder model was used and computed by the finite element method.

  9. Solid Lipid Nanoparticles Carrying Temozolomide for Melanoma Treatment. Preliminary In Vitro and In Vivo Studies

    Directory of Open Access Journals (Sweden)

    Nausicaa Clemente

    2018-01-01

    Full Text Available Aim: To develop an innovative delivery system for temozolomide (TMZ in solid lipid nanoparticles (SLN, which has been preliminarily investigated for the treatment of melanoma. Materials and Methods: SLN-TMZ was obtained through fatty acid coacervation. Its pharmacological effects were assessed and compared with free TMZ in in vitro and in vivo models of melanoma and glioblastoma. Results: Compared to the standard free TMZ, SLN-TMZ exerted larger effects, when cell proliferation of melanoma cells, and neoangiogeneis were evaluated. SLN-TMZ also inhibited growth and vascularization of B16-F10 melanoma in C57/BL6 mice, without apparent toxic effects. Conclusion: SLN could be a promising strategy for the delivery of TMZ, allowing an increased stability of the drug and thereby its employment in the treatment of aggressive malignacies.

  10. Solid Lipid Nanoparticles Carrying Temozolomide for Melanoma Treatment. Preliminary In Vitro and In Vivo Studies

    Science.gov (United States)

    Ferrara, Benedetta; Biasibetti, Elena; Schiffer, Davide; Mellai, Marta; Annovazzi, Laura; Cangemi, Luigi; Muntoni, Elisabetta; Dianzani, Umberto

    2018-01-01

    Aim: To develop an innovative delivery system for temozolomide (TMZ) in solid lipid nanoparticles (SLN), which has been preliminarily investigated for the treatment of melanoma. Materials and Methods: SLN-TMZ was obtained through fatty acid coacervation. Its pharmacological effects were assessed and compared with free TMZ in in vitro and in vivo models of melanoma and glioblastoma. Results: Compared to the standard free TMZ, SLN-TMZ exerted larger effects, when cell proliferation of melanoma cells, and neoangiogeneis were evaluated. SLN-TMZ also inhibited growth and vascularization of B16-F10 melanoma in C57/BL6 mice, without apparent toxic effects. Conclusion: SLN could be a promising strategy for the delivery of TMZ, allowing an increased stability of the drug and thereby its employment in the treatment of aggressive malignacies. PMID:29364157

  11. Linear and nonlinear kinetic-stability studies in tokamaks

    International Nuclear Information System (INIS)

    Tang, W.M.; Chance, M.S.; Chen, L.; Krommes, J.A.; Lee, W.W.; Rewoldt, G.

    1982-09-01

    This paper presents results of theoretical investigations on important linear kinetic properties of low frequency instabilities in toroidal systems and on nonlinear processes which could significantly influence their impact on anomalous transport. Analytical and numerical methods and also particle simulations have been employed to carry out these studies. In particular, the following subjects are considered: (1) linear stability analysis of kinetic instabilities for realistic tokamak equilibria and the application of such calculations to the PDX and PLT tokamak experiments including the influence of a hot beam-ion component; (2) determination of nonlinearly saturated, statistically steady states of three interacting drift modes; and (3) gyrokinetic particle simulation of drift instabilities

  12. Study on the carry capacity of edible jellyfish fishery in Liaodong Bay

    Science.gov (United States)

    You, Kui; Bian, Yongning; Ma, Caihua; Chi, Xupeng; Liu, Zhiqiang; Zhang, Yuyu

    2016-06-01

    Jellyfish fishing is a special type of fishery that mainly exists in some countries of East and Southeast Asia. China has the largest jellyfish fishery yield in the world with an annual harvest of around 300 thousand tons. Liaodong Bay is the most important jellyfish fishery ground in China. However, due to the high benefits of jellyfish fishery, which leads to illegal and out-of-season jellyfish fishing occurring each year in Liaodong Bay. Illegal jellyfish fishery in Liaodong Bay is a typical example of the tragedy of the commons. The key problem is that fishermen seek to an illegally initiate jellyfish fishing as early as possible. In this paper, basing on the data of edible jellyfish's biology and ecology, we mainly analyzed the history of jellyfish fishery in China, especially in Liaodong bay, and then we calculated the carry capacity of edible jellyfish in Liaodong Bay which is about 300 thousand tons one year. This number is equal to the recent annual yield of edible jellyfish in China. Furthermore, basing on the carry capacity and reasonable quotas price analysis, we set up a Jellyfish fishing quotas and deficit quotas buyback system which could be a suitable and effective solution for jellyfish fishery management and development in Liaodong Bay at the underlying roots. Although China is the first country with edible jellyfish aquaculture, the annual yield of jellyfish aquaculture is only one fifth of jellyfish fishing. So, there is a very bright developing prospect about edible jellyfish aquaculture in China.

  13. Preliminary study on early growth traits of betula platyphylla seeds carried by space satellite

    International Nuclear Information System (INIS)

    Huang Haijiao; Li Kailong; Liu Guifeng; Li Zhixin; Teng Wenhua; Jiang Jing

    2010-01-01

    Dry seeds of Betula platyphylla were carried by return satellite for space mutagenesis. Growth characteristics of two-year-old and five-year-old Betula platyphylla trees were analyzed among 4 families (HT98-1, HT98-2, HT98-3 and HT98-4) after space mutagensis. The results showed that the height of two-year-old seedlings from space induced mutant lines HT98-1, HT98-2 and HT98-4 was significant difference with their ground control. Among these families except for family HT98-4, the others were significantly higher than their ground control; there was a significant difference at 0.01 level on five-year-old height between HT98-1 and HT98-4 and their ground control. According to x-bar + S as standard, 64 superior individuals from 2 families were selected out,their average height of which was higher than the average of 14.84% of control, their diameter of breast height (DBH) was 27.90% higher than their control,their volume was 64.27% higher than their control. These superior mutants of Betula platyphylla lay the basis for future space induction breeding. (authors)

  14. STUDY OF THERMAL AND ACID STABILITY OF BENTONITE CLAY

    Directory of Open Access Journals (Sweden)

    Karna Wijaya

    2010-06-01

    Full Text Available The thermal and acid stability of the bentonite clays (Na- and Ca-bentonite have been tested. The thermal stability testing has been carried out by heating 5 gram of the clays  for five hours at 200, 300 and 500 °C respectively, meanwhile acid stability testing was performed by immersing 5 gram clays into 100 mL sulphuric acid 1M, 2M and 3M for 24 hours. The tested clays, then were characterized by means of X-Ray difractometry and IR-spectroscopy methods. The characterization results showed that upon heating, both Ca- and Na-bentonites indicated same thermal stability. However, upon acid treatment, Na-bentonite was found relatively stabiler and more resistance then Ca-bentonite.   Keywords: bentonite, clay, thermal stability, acid stability.

  15. Geological Fieldwork: A Study Carried out with Portuguese Secondary School Students

    Science.gov (United States)

    Esteves, Helena; Ferreira, Paulo; Vasconcelos, Clara; Fernandes, Isabel

    2013-01-01

    Recognizing the relevance that fieldwork and field trips have in the teaching of geosciences and related learning processes, this study presents two geological fieldwork studies that were established with Portuguese secondary school students. Both studies were focused on geoscience content knowledge, and attempted to increase environmental…

  16. STUDY ABOUT THE STABILITY AND CONTROL OF A ROTOR AIRPLANE

    OpenAIRE

    Stafy, Victor; Neto, Aristeu Silveira

    2017-01-01

    On this paper is studied the stability and control of a Rotor Airplane, more specifically a MAV (Micro Air Vehicle) and how works the dynamics of flight of this unusual configuration of aircraft. It’s discussed the impact of the gyroscopic effect on stability (mainly lateral and directional stability) and was found the best feasible configuration of the stability surface, but the project of the stabilizers was limited to lifting surfaces that use airfoil sections, the possibility of a very un...

  17. /sup 131/I albumin study of patients carrying progressive systemic sclerosis

    Energy Technology Data Exchange (ETDEWEB)

    Cossermelli, W; Carvalho, N; Papaleo Netto, M [Sao Paulo Univ. (Brazil). Centro de Medicina Nuclear

    1974-05-01

    /sup 131/I albumin metabolic changes were studied in 14 female patients with progressive systemic sclerosis. A statistical study of the gathered data disclosed increased distribution and turnover half-life and diminished turnover rate of radioactive substance. Since T/2 of turnover and turnover rate are the result produced by the albumin synthesis and degradation, they are probably lowered during active disease causing hypoalbuminemia. The aminoacids also are probably absorbed by other protein like the gammaglobuline synthesis.

  18. The relationship between leadership and organizational culture: a study carried out in an HEI

    OpenAIRE

    Andressa Gonçalves; Nicole Pasini Trevisol; Mauricio Capobianco Lopes; Joseane da Silva Soethe

    2015-01-01

    This research aimed to identify leadership styles and the type of organizational culture present in the institution of higher education studied, as well as the relationship between these two artefacts in the educational context studied. To this end, theoretical frameworks were sought as the concept of organizational culture, transformational and transactional leadership and also the relationship between culture and leadership. Data were collected through a “in situ” questionnaire ...

  19. Study of theophylline stability on polymer matrix

    International Nuclear Information System (INIS)

    Rodrigues, Kiriaki M.S.; Parra, Duclerc F.; Oliveira, Maria Jose A.; Bustillos, Oscar V.; Lugao, Ademar B.

    2007-01-01

    Theophylline is a bronchodilator, commonly known and used as a drug model in the development of pharmaceutical formulations. The stability of the drug and the matrix, scope of this study, was evaluated in the solid formulation. Polymeric matrix based on PHB containing the drug (theophylline) was prepared and submitted to radiation sterilization at different doses of: 5, 10, 20 and 25 kGy using a Cobalt- 60 source. The modified drug release of theophylline sterilized tablets has been studied. Modern techniques of HPLC (High Pressure Liquid Chromatography), DSC (Differential scanning calorimetry) and TGA (Thermogravimetry analysis) were employed. The results have shown the influence of sterilization by radiation process in both the theophylline and the polymeric drug delivery matrix samples. The increasing of polymeric matrix crosslinking under radiation conditions retards the drug release while the theophylline structure is stable under the radiation (author)

  20. Study on stability of DMS meridian detector.

    Science.gov (United States)

    Yang, Ning; Huang, Li; Yuan, Jiamin; Zhang, Zhifang; Yang, Zhimin

    2016-05-01

    The stability of meridian detector was the basis to study meridian through conductance method. Ancient documents mentioned that the human body's blood could change with the time and meridians. When qi and blood came, the qi and blood would be full of that place; when qi and blood gone, the local skin shining could fade and recess. It liked the tidal fluctuation, then caused the corresponding acupuncture points conductance value changes. Modern studies had reported that meridian detector instrument the skin area of twelve meridians acupuncture points could change along with time within 24 hours. In this circumstance, whether the conductance values changes in human acupuncture points had statistical significance was vital important. DMS meridian detector instruction was adopt to measure the twelve meridian jingyuan acupuncture point in order to analyze the acupuncture point conductance value changes within one day.

  1. Study of the ruining behaviour of a structure with reinforced concrete carrying walls

    International Nuclear Information System (INIS)

    Manas, B.

    1998-06-01

    Nuclear facility buildings must be constructed with the respect of para-seismic rules. These rules are defined according to the most probable seismic risk estimated for the sites. This study concerns the ruining behaviour of a structure made of reinforced concrete walls. In a first part, a preliminary study on reinforced concrete is performed with the Castem 2000 finite elements code. This study emphasizes the non-linear phenomena that take place inside the material, such as the cracking of concrete and the plasticization of steels. In a second part, predictive calculations were performed on a U-shape structure. This structure was submitted to earthquakes of various magnitudes and the response of the structure was analyzed and interpreted. (J.S.)

  2. Forced convection boiling of sodium. Study carried out in the framework of fast neutrons reactors safety

    International Nuclear Information System (INIS)

    Charlety, Paul

    1971-01-01

    Within the framework of the safety of fast neutron reactors, this research thesis reports the study of sodium boiling in order to assess safety margins, and to predict the consequences of some accidents. The author thus addresses issues related to sodium boiling by notably focussing on boiling physics. He first defines these issues and presents the adopted approach for this research, and then describes the experimental installation. He reports the experimental study which comprised different types of tests, and presents experimental results. He reports the development of a calculation model which could report phenomena which have been experimentally noticed [fr

  3. Substance Abuse, Parenting Styles, and Aggression: An Exploratory Study of Weapon Carrying Students.

    Science.gov (United States)

    Corvo, Kenneth; Williams, Kimberly

    2000-01-01

    Study represents one of the first undertaken exclusively with students who brought weapons to school. Questions examined measures of student and family relationships, as well as attitudes and behavior among students caught with weapons at school. Findings support the need for substance abuse assessments and family interventions that strengthen…

  4. Sodium fire aerosol behaviour: a review of studies carried out under the auspices of the CEC

    International Nuclear Information System (INIS)

    Dunbar, I.H.

    1992-01-01

    The purpose of the present report was to produce a synthesis of the results of four studies (Reports EUR 9172 EN, EUR 9203 EN, SESRU No. EF.21.12.R/88.527 and EUR 13274 EN) bringing out their overall contribution to our understanding of the way sodium fire aerosols behave in secondary containment buildings. In particular the following questions are addressed in the light of the information produced by the CONT group studies: (i) Are current instrumentation techniques capable of obtaining the data about aerosols needed to validate the computer models. (ii) Is the current database produced by sodium fire experiments sufficient to validate the computer models. (iii) Can the current computer codes predict the behaviour of sodium fire aerosols in hypothetical LMFBR accidents with sufficient accuracy

  5. Synthesis and antioxidant activity study of pyrazoline carrying arylfuran/thiophene moiety

    Directory of Open Access Journals (Sweden)

    Jois Vidyashree H.S.

    2014-01-01

    Full Text Available A novel series of N-acetyl-3-aryl-5-(5-(p/o-nitrophenyl-2-arylfuryl/thienyl substituted pyrazoline (3a-o were synthesized by the reaction of 1-aryl-3-(5-(p/o-nitrophenyl-2-furyl/thienyl-2-propene-1-one with hydrazine hydrate in acetic acid medium. The structures of the newly synthesized compounds were established by IR, 1H NMR, mass spectra and single crystal X-ray study. The synthesized compounds were subjected to antioxidant activity using DPPH scavenging assay. The compounds 3a, 3f, 3h and 3o showed moderate activity.

  6. The study of carrying capacity of timber slabs with use the finite elements method

    Directory of Open Access Journals (Sweden)

    Demeshok Vitalii

    2017-01-01

    Full Text Available In the article, the results of the study of behavior of timber slab under influence of fire with the standard “time-temperature” curve are presented. The finite element method was used for it. For the calculation we constructed a grid models of timber slabs. As a result of solution of the thermal problem was obtained temperature distribution and the graphs of maximum deflection of timber slabs and its slew rate depending on the time of the test. The obtained graphs allow to obtain data on the occurrence of the limit state of loss of bearing capacity by comparing current values of displacements and velocities with the maximum allowable. Analysis of the graphs shows that the criteria limit state of loss of bearing capacity does not occur. Calculation method of evaluating the fire resistance of timber slabs was developed. For it use database about strain-stress state of this slabs in conditions of influence of the fire.

  7. BRAND LOYALTY OF FEMALE CONSUMERS - STUDY CARRIED IN SFÂNTU GHEORGHE AND THE SURROUNDING AREAS

    Directory of Open Access Journals (Sweden)

    Erika KULCSÁR

    2011-01-01

    Full Text Available Today, the role of women in society has significantly changed, they work as men so they have their own income that they can spend as they wish and as necessary. We need to pay particular importance to consumer behaviour of female and as such it should be treated as a particular segment. This paper aims to study the simultaneous effects - based on data from quantitative marketing research – that the independent variables generate on the dependent variable. The variables introduced in the analysis of variance are: How often do you drink coffee /tea every day?, Age, Income, Last graduated school. We applied the hi square test we in order to analyze the links between two variables measured with nominal scale. The variables analyzed are: Do you always buy the some brand and The highest level of education achieved.

  8. Seismological studies carried out by the CEA in connection with the safety of nuclear sites

    International Nuclear Information System (INIS)

    Barbreau, A.; Ferrieux, H.; Mohammadioun, B.

    1975-01-01

    In order to evaluate the seismic risk at nuclear sites, the Department of Nuclear Safety of the French Atomic Energy Commission (CEA) has been conducting a programme of seismological studies for several years past. This programme is aimed at acquiring a better knowledge of seismic phenomena, in particular the spectral distribution of the energy of earthquakes, considered to be the only correct approach to the problem of earthquake protection, as well as a better knowledge of the seismic activity of the areas surrounding nuclear sites. The authors propose defining the design spectrum of the site on the basis of the probable energy at the source, the distance from the epicentre and the transfer function of the geological formations. The need - for the purpose of defining this spectrum - to acquire data on the characteristics of French earthquakes and on regional seismicity led the Department of Nuclear Safety to set up a network of seismic stations. It now has an observatory at the Cadarache Nuclear Research Centre and mobile stations with automatic magnetic recording for studying aftershock sequences and the activity of faults in the vicinity of nuclear sites, and for making the measurements necessary to calculate the transfer functions. With this equipment it was possible to record six aftershocks of the Oleron earthquake on 7 September 1972 close to the epicentre, and to calculate the spectra therefrom. The latter contained a lot of high frequencies, which is in agreement with the data obtained from other sources for earthquakes of low energy. The synthetic spectra calculated on the basis of one magnitude and one distance are in good agreement with the spectra obtained experimentally

  9. Stability studies on piroxicam encapsulated niosomes.

    Science.gov (United States)

    Ertekin, Zehra Ceren; Bayindir, Zerrin Sezgin; Yuksel, Nilufer

    2015-01-01

    Drug delivery systems which yield ideal treatments are currently the center of interest for researchers. Niosomes have numerous advantages over other drug delivery systems. However, stability issue is not clear yet and is a serious drawback for niosomes. In this study, the stability of niosomes was the center of interest. Piroxicam which was chosen as the model drug was loaded to niosomes. Niosomes were prepared by thin-film method and different forms (aqueous dispersion, lyophilized powder and lyophilized powder with cryoprotectant) of the original niosome formulation were prepared. The samples were stored either at 5°C±3°C or 25°C±2°C/60% RH±5% RH for 3 months. The drug leakage percent, particle size and distribution, zeta potential, drug release profiles were determined and niosomes were visualized under optic microscope. Niosome formulation provided sustained release of piroxicam. The drug leakage from stored niosomes was observed at the level of 1.56-6.63 %. Individual vesicle images were obtained for all samples by optical microscope. However, particle size of niosomes was increased upon storage. The zeta potential values were neither related to time nor physical form. Drug release profiles and amounts were quite similar for all forms of niosomes and the original formulation but a slight decrease was noticed on drug release amounts by time. This indicates that niosomes become more rigid by time. Although the ideal storage was obtained with lyophilized niosomes at 5±3°C in this study, the usage of suitable cryoprotectant and optimized lyophilization process should be further evaluated.

  10. Psoriasis carries an increased risk of venous thromboembolism: a danish nationwide cohort study

    DEFF Research Database (Denmark)

    Ahlehoff, Ole; Gislason, Gunnar Hilmar; Lindhardsen, Jesper

    2011-01-01

    . In an unselected nationwide cohort, we used multivariate Poisson regression models controlling for age, gender, comorbidity, concomitant medication, socio-economic data, and calendar year, to assess the risk of VTE associated with psoriasis. A total of 35,138 patients with mild and 3,526 patients with severe...... psoriasis were identified and compared with 4,126,075 controls. Patients with psoriasis had higher incidence rates per 1000 person-years of VTE than controls (1.29, 1.92, and 3.20 for controls, mild psoriasis, and severe psoriasis, respectively). The rate ratio (RR) of VTE was elevated in all patients...... with psoriasis with RR 1.35 (95% confidence interval [CI] 1.21–1.49) and RR 2.06 (CI 1.63–2.61) for mild and severe psoriasis, respectively. Exclusion of patients with malignancies, and censoring of patients undergoing surgery did not alter the results. Conclusion This nationwide cohort study indicates...

  11. Keep calm and carry on: A crisis communication study of Cadbury and McDonalds

    Directory of Open Access Journals (Sweden)

    Telang Achyut

    2016-04-01

    Full Text Available Many organizations, at some point or another, have to face a crisis situation. In that scenario, the way in which the organization communicates makes or breaks the organization’s success in dealing with the crisis. Especially after the emergence of the social media, the impact of crisis communication on the process of successful crisis management has become even greater than before. Organizations have to take the initiative, to be proactive and create a plan for crisis communication. This paper is focused on the comparative study of the communication approaches followed by Cadbury and McDonalds during a period when the companies were dealing with a crisis. The findings of the content analysis show that a company should respond to the crisis as quickly as possible to avoid loss in terms of sales. The initial statement of the companies during a crisis should be clear, positive and through the right channel to help the company regain its reputation on the market. Advertising is the best way to convey the message across the world because the crisis situation that has come up in one market can soon catch-up in the other markets where the company operates. The company has to connect with the consumers on emotional grounds because the crisis breaks down the faith of the consumers in the company. The recovery actions that support the statements also play an important role during the crisis situation. By following the above-mentioned communication strategies, organizations can achieve damage control as well as turn the crisis into an opportunity to grow.

  12. Domestic water carrying and its implications for health: a review and mixed methods pilot study in Limpopo Province, South Africa

    Directory of Open Access Journals (Sweden)

    Geere Jo-Anne L

    2010-08-01

    Full Text Available Abstract Background Lack of access to safe water remains a significant risk factor for poor health in developing countries. There has been little research into the health effects of frequently carrying containers of water. The aims of this study were to better understand how domestic water carrying is performed, identify potential health risk factors and gain insight into the possible health effects of the task. Methods Mixed methods of data collection from six were used to explore water carrying performed by people in six rural villages of Limpopo Province, South Africa. Data was collected through semi-structured interviews and through observation and measurement. Linear regression modelling were used to identify significant correlations between potential risk factors and rating of perceived exertion (RPE or self reported pain. Independent t-tests were used to compare the mean values of potential risk factors and RPE between sub-groups reporting pain and those not reporting pain. Results Water carrying was mainly performed by women or children carrying containers on their head (mean container weight 19.5 kg over a mean distance of 337 m. The prevalence of spinal (neck or back pain was 69% and back pain was 38%. Of participants who carried water by head loading, the distance walked by those who reported spinal pain was significantly less than those who did not (173 m 95%CI 2-343; p = 0.048. For head loaders reporting head or neck pain compared to those who did not, the differences in weight of water carried (4.6 kg 95%CI -9.7-0.5; p = 0.069 and RPE (2.5 95%CI -5.1-0.1; p = 0.051 were borderline statistically significant. For head loaders, RPE was significantly correlated with container weight (r = 0.52; p = 0.011 and incline (r = 0.459; p = 0.018 Conclusions Typical water carrying methods impose physical loading with potential to produce musculoskeletal disorders and related disability. This exploratory study is limited by a small sample size

  13. Spent-fuel-stabilizer screening studies

    International Nuclear Information System (INIS)

    Wynhoff, N.; Girault, S.E.; Fish, R.L.

    1980-11-01

    A broad range of potential stabilizer materials was identified and screened for packaging spent fuel assemblies for underground storage. The screening took into consideration the thermal gradient, stress, differential thermal expansion, nuclear criticality, radiation shielding, cost, and availability. Recommended stabilizer materials for further testing include silica, quartz, mullite, zircon, bentonite, graphite, gases, lead, Zn alloys, Cu alloys, etc

  14. Effects of carrying a pregnancy and of method of delivery on urinary incontinence: a prospective cohort study

    OpenAIRE

    Eason, Erica; Labrecque, Michel; Marcoux, Sylvie; Mondor, Myrto

    2004-01-01

    Abstract Background This study was carried out to identify risk factors associated with urinary incontinence in women three months after giving birth. Methods Urinary incontinence before and during pregnancy was assessed at study enrolment early in the third trimester. Incontinence was re-assessed three months postpartum. Logistic regression analysis was used to assess the role of maternal and obstetric factors in causing postpartum urinary incontinence. This prospective cohort study in 949 p...

  15. Stability study of azithromycin in ophthalmic preparations

    Directory of Open Access Journals (Sweden)

    Andréia de Haro Moreno

    2009-06-01

    Full Text Available A stability study of azithromycin in ophthalmic preparations was developed by submission to different types of light, temperature and pH, using the biodiffusion assay (cylinder 3 x 3 for the quantifications. Bacillus subtilis, ATCC 9372, was used as test organism. The used concentration range was of 50 to 200 µg/mL. The study demonstrated that the drug suffered degradation when submitted to the ultraviolet light, germicide light, solar luminosity, acid solution, basic solution and hydrogen peroxide solution. The results were analyzed by the analysis of variance (ANOVA.O estudo de estabilidade de azitromicina em preparações oftálmicas foi realizado após exposição a diferentes tipos de luz, temperatura e pH, utilizando o método de difusão em ágar (cilindros 3 x 3 para as quantificações. A faixa de concentração foi de 50 a 200 µg/mL. O estudo demonstrou que o fármaco sofreu degradação quando submetido às luzes ultravioleta, germicida e solar, e a soluções ácida, alcalina e de peróxido de hidrogênio. Os resultados foram analisados através da análise da variância (ANOVA.

  16. Comparative study of resist stabilization techniques for metal etch processing

    Science.gov (United States)

    Becker, Gerry; Ross, Matthew F.; Wong, Selmer S.; Minter, Jason P.; Marlowe, Trey; Livesay, William R.

    1999-06-01

    This study investigates resist stabilization techniques as they are applied to a metal etch application. The techniques that are compared are conventional deep-UV/thermal stabilization, or UV bake, and electron beam stabilization. The electron beam tool use din this study, an ElectronCure system from AlliedSignal Inc., ELectron Vision Group, utilizes a flood electron source and a non-thermal process. These stabilization techniques are compared with respect to a metal etch process. In this study, two types of resist are considered for stabilization and etch: a g/i-line resist, Shipley SPR-3012, and an advanced i-line, Shipley SPR 955- Cm. For each of these resist the effects of stabilization on resist features are evaluated by post-stabilization SEM analysis. Etch selectivity in all cases is evaluated by using a timed metal etch, and measuring resists remaining relative to total metal thickness etched. Etch selectivity is presented as a function of stabilization condition. Analyses of the effects of the type of stabilization on this method of selectivity measurement are also presented. SEM analysis was also performed on the features after a compete etch process, and is detailed as a function of stabilization condition. Post-etch cleaning is also an important factor impacted by pre-etch resist stabilization. Results of post- etch cleaning are presented for both stabilization methods. SEM inspection is also detailed for the metal features after resist removal processing.

  17. Attitude towards New Packaging to Reduce Condom-carrying Embarrassment among Thai Youth, A Cross-sectional Study

    OpenAIRE

    Apinut Wongkietkachorn; Kunathip Nissaipan; Narin Hiransuthikul

    2014-01-01

    Background: Human Immunodeficiency Virus (HIV) incidence has been increasing in Thai youth, mostly from unsafe sex. Embarrassment with carrying condom was one of the main reasons. This study aims to evaluate attitude towards condom use, sexual behavior and the new condom packaging that merges with daily life products in Thai youth. Methods: A cross-sectional study was conducted among volunteers aged 15-24. New packaging were demonstrated and the volunteers were provided with questionnaire...

  18. Accounting for pore water pressure and confined aquifers in assessing the stability of slopes: a Limit Equilibrium analysis carried out through the Minimum Lithostatic Deviation method

    Science.gov (United States)

    Ausilia Paparo, Maria; Tinti, Stefano

    2015-04-01

    The model we introduce is an implementation of the Minimum Lithostatic Deviation (MLD) method, developed by Tinti and Manucci (Tinti and Manucci 2006; 2008), that makes use of the limit equilibrium (LE) theory to estimate the stability of a slope. The main purpose here is to analyse the role of a confined aquifer on the value of the Safety Factor (F), the parameter that in the LE is used to determine if a slope is stable or unstable. The classical LE methods treat unconfined aquifers by including the water pore pressure in the Mohr-Coulomb failure formula: since the water decreases the friction shear strength, the soil above the sliding surface turns out to be more prone to instability. In case of a confined aquifer, however, due to a presence of impermeable layers, the water is not free to flow into the matrix of the overlying soil. We consider here the assumption of a permeable soil sliding over an impermeable layer, which is an occurrence that is found in several known landslide cases (e.g. Person, 2008; Strout and Tjeltja, 2008; Morgan et al., 2010 for offshore slides; and Palladino and Peck, 1972; Miller and Sias, 1998; Jiao et al. 2005; Paparo et al., 2013 for slopes in proximity of artificial or natural water basins) where clay beds form the potential sliding surface: the water, confined below, pushes along these layers and acts on the sliding body as an external bottom load. We modify the MLD method equations in order to take into account the load due to a confined aquifer and apply the new model to the Vajont case, where many have hypothesised the contribution of a confined aquifer to the failure. Our calculations show that the rain load i) infiltrating directly into the soil body and ii) penetrating into the confined aquifer below the clay layers, in addition with the lowering of the reservoir level, were key factors of destabilization of the Mt Toc flank and caused the disastrous landslide.

  19. Stability Study of the RERTR Fuel Microstructure

    Energy Technology Data Exchange (ETDEWEB)

    Jian Gan; Dennis Keiser; Brandon Miller; Daniel Wachs

    2014-04-01

    The irradiation stability of the interaction phases at the interface of fuel and Al alloy matrix as well as the stability of the fission gas bubble superlattice is believed to be very important to the U-Mo fuel performance. In this paper the recent result from TEM characterization of Kr ion irradiated U-10Mo-5Zr alloy will be discussed. The focus will be on the phase stability of Mo2-Zr, a dominated second phase developed at the interface of U-10Mo and the Zr barrier in a monolithic fuel plate from fuel fabrication. The Kr ion irradiations were conducted at a temperature of 200 degrees C to an ion fluence of 2.0E+16 ions/cm2. To investigate the thermal stability of the fission gas bubble superlattice, a key microstructural feature in both irradiated dispersion U-7Mo fuel and monolithic U-10Mo fuel, a FIB-TEM sample of the irradiated U-10Mo fuel (3.53E+21 fission/cm3) was used for a TEM in-situ heating experiment. The preliminary result showed extraordinary thermal stability of the fission gas bubble superlattice. The implication of the TEM observation from these two experiments on the fuel microstructural evolution under irradiation will be discussed.

  20. Small Ro/Pax Vessel stability study

    DEFF Research Database (Denmark)

    Erichsen, Henrik; Kristensen, Hans Otto Holmegaard; Jensen, Jørgen Juncher

    2015-01-01

    In 2009 new damage stability requirements for passenger ships based on a probabilistic method were adopted by IMO and are now part of the current SOLAS Chapter II-1 regulations (SOLAS 2009). The mandate from IMO was to keep the same safety level as inherent in the old deterministic damage stabili...

  1. Attitude towards New Packaging to Reduce Condom-carrying Embarrassment among Thai Youth, A Cross-sectional Study

    Directory of Open Access Journals (Sweden)

    Apinut Wongkietkachorn

    2014-06-01

    Full Text Available Background: Human Immunodeficiency Virus (HIV incidence has been increasing in Thai youth, mostly from unsafe sex. Embarrassment with carrying condom was one of the main reasons. This study aims to evaluate attitude towards condom use, sexual behavior and the new condom packaging that merges with daily life products in Thai youth. Methods: A cross-sectional study was conducted among volunteers aged 15-24. New packaging were demonstrated and the volunteers were provided with questionnaires to complete in privacy booth and submit anonymously. Results: Of 680 participants with mean age of 19.7±2.7 years and 59.9% females, half of them thought condom should be carried and used. However, the same group did not actually do. Two-thirds of participants were interested and would use the packaging, citing these reasons charming, convenience, and disguise of condom. Females preferred the packaging significantly more than males. Conclusion: Disguising condom packaging, as phone charm and key ring, might be another safe and practical way to encourage youth to carry condoms around.

  2. Equations for studies of feedback stabilization

    International Nuclear Information System (INIS)

    Boozer, A.H.

    1998-01-01

    Important ideal magnetohydrodynamic (MHD) instabilities grow slowly when a conducting wall surrounds a toroidal plasma. Feedback stabilization of these instabilities may be required for tokamaks and other magnetic confinement concepts to achieve adequate plasma pressure and self-driven current for practical fusion power. Equations are derived for simulating feedback stabilization, which require the minimum information about an ideal plasma for an exact analysis. The equations are solved in the approximation of one unstable mode, one wall circuit, one feedback circuit, and one sensor circuit. The analysis based on a single unstable mode is shown to be mathematically equivalent to the standard analysis of feedback of the axisymmetric vertical instability of tokamaks. Unlike that analysis, the method presented here applies to multiple modes that are coupled by the wall and to arbitrary toroidal mode numbers. copyright 1998 American Institute of Physics

  3. Substantiation of necessity and possibility to carry out activities for stabilization of internal building structures supporting fuel-containing materials in order to prevent its destruction entailed by extemal events

    International Nuclear Information System (INIS)

    Rud'ko, V.M.; Sidorenko, N.V.; Batij, V.G.

    2001-01-01

    An analysis of technical state of Shelter object (SO) internal building structures supporting FCM was made. A spatial calculated model was designed and its estimates were performed with stressed efforts on the end elements, end elements bending and replacement of its junction nodes. Calculated data obtained are designated to perform check calculations for bearing constructive elements with the goal to assess its reliability. The results of estimates of building structures reliability will be used to substantiate a necessity of its stabilization and preparation of proposal concerning realization of stabilization activities in the SO conditions. The analysis of main factors of radiation impact to the personnel, public, and environment in case of possible collapse of unstable building structures has been carried out

  4. Life sciences payload definition and integration study. Volume 1: Executive summary. [carry-on laboratory for Spacelab

    Science.gov (United States)

    1974-01-01

    The definition and integration tasks involved in the development of design concepts for a carry-on laboratory (COL), to be compatible with Spacelab operations, were divided into the following study areas: (1) identification of research and equipment requirements of the COL; (2) development of a number of conceptual layouts for COL based on the defined research of final conceptual designs; and (4) development of COL planning information for definition of COL/Spacelab interface data, cost data, and program cost schedules, including design drawings of a selected COL to permit fabrication of a functional breadboard.

  5. Summaries of studies carried out in the NKS/BOK-2 project. Technical report[Radiological and environmental consequences

    Energy Technology Data Exchange (ETDEWEB)

    Palsson, S E [Icelandic Radiation Protection Inst., Reykjavik (Iceland)

    2002-12-01

    Summaries of studies carried out in the NKSBOK-2 project, Radiological and Environmental Consequences. The structure of the project as such is described in NKS-64, Radiological and Environmental Consequences - Final Report of the Nordic Nuclear Safety Research Project BOK-2. That report also includes compilations based on the summaries presented in this report. The project was carried out 1998-2001 with participants from all the Nordic countries. Representatives from the Baltic States were also invited to some of the meetings and seminars. The project consisted of work on terrestrial and marine radioecology and had a broad scope in order to enable participation of research groups with various fields of interest. The topics included improving assessment of old and recent fallout, use of radionuclides as tracers in Nordic marine areas, improving assessment of internal doses and use of mass spectrometry in radioecology. This report is a compilation of summaries from each research group, 32 papers in all, and gives references to papers published in scientific journals. Some of the studies have been described previously, at least to some degree, in NKS-70, Proceedings of the 8{sup th} Nordic Seminar on Radioecology, 25-28 February 2001, Rovaniemi, Finland. (au)

  6. Development and validation of stability indicating studies of ...

    African Journals Online (AJOL)

    Development and validation of stability indicating studies of paliperidone ... A simple and sensitive stability indicating HPLC method is developed for the ... The developed method was proved adequate for quantitative determination of ... Browse By Country · List All Titles · Free To Read Titles This Journal is Open Access.

  7. Plasma position stability studies for TEXT-Upgrade

    International Nuclear Information System (INIS)

    Solano, E.R.; Neilson, G.H.

    1989-01-01

    A study of the vacuum vessel action on the plasma as a passive stabilizer is presented. The position feedback system is modelled in frequency domain to ascertain if the plasma in TEXT-Upgrade can be stabilized. 4 refs., 3 figs., 3 tabs

  8. Experimental study of flame stability in biogas premix system

    International Nuclear Information System (INIS)

    Diaz G, Carlos A; Amell A Andres; Cardona Luis F

    2008-01-01

    Utilization of new renewable energy sources have had a special interest in last years looking for decrease the dependence of fossil fuels and the environmental impact generated for them. This work studies experimentally the flame stability of a simulated biogas with a volumetric composition of 60% methane and 40% carbon dioxide. The objective of this study is to obtain information about design and interchangeability of gases in premixed combustion systems that operate with different fuel gases. The critical velocity gradient was the stability criteria used. Utilization of this criteria and the experimental method followed, using a partial premixed burner, stability flame diagram of biogas studied had been obtained. Presence of carbon dioxide has a negative effect in flame stability, decreasing significantly the laminar flame speed and consequently, the stability range of biogas burners because of apparition of blow off.

  9. Stability of metallic foams studied under microgravity

    CERN Document Server

    Wuebben, T; Banhart, J; Odenbach, S

    2003-01-01

    Metal foams are prepared by mixing a metal powder and a gas-releasing blowing agent, by densifying the mix to a dense precursor and finally foaming by melting the powder compact. The foaming process of aluminium foams is monitored in situ by x-ray radioscopy. One observes that foam evolution is accompanied by film rupture processes which lead to foam coalescence. In order to elucidate the importance of oxides for foam stability, lead foams were manufactured from lead powders having two different oxide contents. The two foam types were generated on Earth and under weightlessness during parabolic flights. The measurements show that the main function of oxide particles is to prevent coalescence, while their influence on bulk viscosity of the melt is of secondary importance.

  10. Green Tea Leaves Extract: Microencapsulation, Physicochemical and Storage Stability Study

    Directory of Open Access Journals (Sweden)

    James A. Zokti

    2016-07-01

    Full Text Available Green tea polyphenols have been reported to possess many biological properties. Despite the many potential benefits of green tea extracts, their sensitivity to high temperature, pH and oxygen is a major disadvantage hindering their effective utilization in the food industry. Green tea leaves from the Cameron Highlands Malaysia were extracted using supercritical fluid extraction (SFE. To improve the stability, green tea extracts were encapsulated by spray-drying using different carrier materials including maltodextrin (MD, gum arabic (GA and chitosan (CTS and their combinations at different ratios. Encapsulation efficiency, total phenolic content and antioxidant capacity were determined and were found to be in the range of 71.41%–88.04%, 19.32–24.90 (g GAE/100 g, and 29.52%–38.05% respectively. Further analysis of moisture content, water activity, hygroscopicity, bulk density and mean particles size distribution of the microparticles were carried out and the results ranged from; 2.31%–5.11%, 0.28–0.36, 3.22%–4.71%, 0.22–0.28 g/cm3 and 40.43–225.64 µm respectively. The ability of the microparticles to swell in simulated gastric fluid (SGF and simulated intestinal fluid (SIF was determined as 142.00%–188.63% and 207.55%–231.77%, respectively. Release of catechin polyphenol from microparticles in SIF was higher comparable to that of SGF. Storage stability of encapsulated catechin extracts under different temperature conditions was remarkably improved compared to non-encapsulated extract powder. This study showed that total catechin, total phenolic content (TPC and antioxidant activity did not decrease significantly (p ≥ 0.05 under 4 °C storage conditions. The half-life study results were in the range of 35–60, 34–65 and 231–288 weeks at storage temperatures of 40 °C, 25 °C and 4 °C respectively, therefore, for improved shelf-life stability we recommend that microparticles should be stored at temperatures below 25 °C.

  11. Laboratory Oxidation Stability Study on B10 Biodiesel Blends

    Energy Technology Data Exchange (ETDEWEB)

    Engelen, B. [and others

    2013-11-15

    A laboratory oxidation stability study has been completed jointly by CONCAWE and DGMK on three biodiesel blends containing 10% v/v (B10) Fatty Acid Methyl Ester (FAME). The results of the study are compared to measurements from an in-vehicle storage stability study on similar B10 diesel fuels that had been conducted previously in a Joint Industry Study. This laboratory study monitored the oxidation stability of the three B10 blends during six weeks of laboratory storage under ambient (25C) and elevated temperature (43C) conditions. Various test methods were used to monitor oxidation stability changes in the B10 diesel fuel blends including electrical conductivity, viscosity, Rancimat oxidation stability (EN 15751), PetroOxy oxidation stability (EN 16091), acid number (EN 14104), Delta Total Acid Number (Delta TAN), and peroxide number (ISO 3960). Elemental analyses by ICP were also completed on the FAME and B10 blends at the start and end of the laboratory study. The concentrations of dissolved metals were very low in all cases except for silicon which was found to be between about 600-700 ppb in the B10 blends. A limited study was also conducted on one neat FAME sample (B100) to investigate the effect of air/oxygen exposure on the rate of decrease in oxidation stability.

  12. Study of the 50 mg Propylthiouracil tablets stability

    International Nuclear Information System (INIS)

    Valdes Bendoyro, Maria Olga; Garcia Penna, Caridad Margarita; Lugones Fernandez, Juan

    2010-01-01

    Authors developed a stability study of 50 mg Propylthiouracil tablets and determination of its expiry date. This study was conducted by fixed life methods and of accelerated stability by high-performance liquid chromatography, validated in Drugs Research and Development Center. Fixed life study was conducted during 24 months at room temperature; whereas the accelerated stability study was conducted exposing the product to light influence, humidity and temperature; during 3 months a analysis was performed for the two first ones and over 6 months in the case of temperature study. Propylthiouracil formula (50 mg tablets) fulfilled the quality specifications described in Pharmacopeia. Results of stability study by fixed life after 24 months showed that thr product maintain the parameter determining its quality during this period, and in the accelerated studies there was not a significant degradation of product. Two years was the expity date established in above mentioned conditions

  13. Numerical studies on the stabilization of neoclassical tearing modes by radio frequency current drive

    International Nuclear Information System (INIS)

    Yu, Q.; Zhang, X.D.; Guenter, S.

    2004-01-01

    Numerical modeling on the stabilization of neoclassical tearing modes by localized radio frequency (rf) current drive has been carried out to study the effects of various wave and plasma parameters on the stabilization and the associated physics. The change of the rf current profile due to the magnetic island has been taken into account by modeling the two-dimensional transport of the fast electrons induced by the rf wave. It is found that, when the rf deposition width is much larger than the island width, the modulated rf current drive to deposit the rf current around the island's o point has a stronger stabilizing effect than a nonmodulated one. The slowing down time of the fast electrons and the initial island width when applying the rf wave are also found to be important in determining the stabilizing effect

  14. Using Urban-Carrying Capacity as a Benchmark for Sustainable Urban Development: An Empirical Study of Beijing

    Directory of Open Access Journals (Sweden)

    Yigang Wei

    2015-03-01

    Full Text Available Sustainable urban development has been receiving growing concerns from both city managers and urban residents across the world. As a yardstick of sustainability, urban carrying capacity (UCC is an important conceptual underpinning that guides local governments in promoting sustainable urban development. However, existing studies still lack consensus not only on the theoretical aspects, but also on the methodological issues for UCC monitoring and evaluation. A knowledge gap exists, which this paper fills. This study aims to develop a practical UCC assessment framework to guide urban development towards achieving sustainability. The quantitative-based assessment framework provides a set of measurable indicators and benchmarks for city managers to conduct routine monitoring on progress toward urban sustainability, and helps identify deficient areas, which urgently need resource allocation to improve UCC. Focusing on a case study of Beijing, this study demonstrates that the framework is useful in promoting urban sustainability. This framework provides rich implications for other city prototypes in China as the nation marches into the next phase of development.

  15. Stabilization

    Directory of Open Access Journals (Sweden)

    Muhammad H. Al-Malack

    2016-07-01

    Full Text Available Fuel oil flyash (FFA produced in power and water desalination plants firing crude oils in the Kingdom of Saudi Arabia is being disposed in landfills, which increases the burden on the environment, therefore, FFA utilization must be encouraged. In the current research, the effect of adding FFA on the engineering properties of two indigenous soils, namely sand and marl, was investigated. FFA was added at concentrations of 5%, 10% and 15% to both soils with and without the addition of Portland cement. Mixtures of the stabilized soils were thoroughly evaluated using compaction, California Bearing Ratio (CBR, unconfined compressive strength (USC and durability tests. Results of these tests indicated that stabilized sand mixtures could not attain the ACI strength requirements. However, marl was found to satisfy the ACI strength requirement when only 5% of FFA was added together with 5% of cement. When the FFA was increased to 10% and 15%, the mixture’s strength was found to decrease to values below the ACI requirements. Results of the Toxicity Characteristics Leaching Procedure (TCLP, which was performed on samples that passed the ACI requirements, indicated that FFA must be cautiously used in soil stabilization.

  16. Understanding Where Americas Public Discussion Takes Place In Todays Society: Case Studies of Concealed Weapons Carry Reform

    Science.gov (United States)

    2016-06-01

    arguing that concealed carry permit holders are a danger to public safety and that mass shootings are taking place by citizens who are legally armed.2...who worked at an abortion clinic that had recently been bombed and whose life had been threatened was denied a license to carry because he was not...populace. The new law laid out new prohibitions and penalties enforceable statewide. Additionally, the Preemption Act was necessary to set the legal

  17. Effects of carrying a pregnancy and of method of delivery on urinary incontinence: a prospective cohort study

    Directory of Open Access Journals (Sweden)

    Mondor Myrto

    2004-02-01

    Full Text Available Abstract Background This study was carried out to identify risk factors associated with urinary incontinence in women three months after giving birth. Methods Urinary incontinence before and during pregnancy was assessed at study enrolment early in the third trimester. Incontinence was re-assessed three months postpartum. Logistic regression analysis was used to assess the role of maternal and obstetric factors in causing postpartum urinary incontinence. This prospective cohort study in 949 pregnant women in Quebec, Canada was nested within a randomised controlled trial of prenatal perineal massage. Results Postpartum urinary incontinence was increased with prepregnancy incontinence (adjusted odds ratio [adj0R] 6.44, 95% CI 4.15, 9.98, incontinence beginning during pregnancy (adjOR 1.93, 95% CI 1.32, 2.83, and higher prepregnancy body mass index (adjOR 1.07/unit of BMI, 95% CI 1.03,1.11. Caesarean section was highly protective (adjOR 0.27, 95% CI 0.14, 0.50. While there was a trend towards increasing incontinence with forceps delivery (adjOR 1.73, 95% CI 0.96, 3.13 this was not statistically significant. The weight of the baby, episiotomy, the length of the second stage of labour, and epidural analgesia were not predictive of urinary incontinence. Nor was prenatal perineal massage, the randomised controlled trial intervention. When the analysis was limited to women having their first vaginal birth, the same risk factors were important, with similar adjusted odds ratios. Conclusions Urinary incontinence during pregnancy is extremely common, affecting over half of pregnant women. Urinary incontinence beginning during pregnancy roughly doubles the likelihood of urinary incontinence at 3 months postpartum, regardless whether delivery is vaginal or by Caesarean section.

  18. Stability studies of amphetamine and ephedrine derivatives in urine.

    Science.gov (United States)

    Jiménez, C; de la Torre, R; Ventura, M; Segura, J; Ventura, R

    2006-10-20

    Knowledge of the stability of drugs in biological specimens is a critical consideration for the interpretation of analytical results. Identification of proper storage conditions has been a matter of concern for most toxicology laboratories (both clinical and forensic), and the stability of drugs of abuse has been extensively studied. This concern should be extended to other areas of analytical chemistry like antidoping control. In this work, the stability of ephedrine derivatives (ephedrine, norephedrine, methylephedrine, pseudoephedrine, and norpseudoephedrine), and amphetamine derivatives (amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine (MDA), and 3,4-methylenedioxymethamphetamine (MDMA)) in urine has been studied. Spiked urine samples were prepared for stability testing. Urine samples were quantified by GC/NPD or GC/MS. The homogeneity of each batch of sample was verified before starting the stability study. The stability of analytes was evaluated in sterilized and non-sterilized urine samples at different storage conditions. For long-term stability testing, analyte concentration in urine stored at 4 degrees C and -20 degrees C was determined at different time intervals for 24 months for sterile urine samples, and for 6 months for non-sterile samples. For short-term stability testing, analyte concentration was evaluated in liquid urine stored at 37 degrees C for 7 days. The effect of repeated freezing (at -20 degrees C) and thawing (at room temperature) was also studied in sterile urine for up to three cycles. No significant loss of the analytes under study was observed at any of the investigated conditions. These results show the feasibility of preparing reference materials containing ephedrine and amphetamine derivatives to be used for quality control purposes.

  19. Hand-carried ultrasound performed at bedside in cardiology inpatient setting – a comparative study with comprehensive echocardiography

    Directory of Open Access Journals (Sweden)

    Ramires Jose F

    2004-11-01

    Full Text Available Abstract Background Hand-carried ultrasound (HCU devices have been demonstrated to improve the diagnosis of cardiac diseases over physical examination, and have the potential to broaden the versatility in ultrasound application. The role of these devices in the assessment of hospitalized patients is not completely established. In this study we sought to perform a direct comparison between bedside evaluation using HCU and comprehensive echocardiography (CE, in cardiology inpatient setting. Methods We studied 44 consecutive patients (mean age 54 ± 18 years, 25 men who underwent bedside echocardiography using HCU and CE. HCU was performed by a cardiologist with level-2 training in the performance and interpretation of echocardiography, using two-dimensional imaging, color Doppler, and simple calliper measurements. CE was performed by an experienced echocardiographer (level-3 training and considered as the gold standard. Results There were no significant differences in cardiac chamber dimensions and left ventricular ejection fraction determined by the two techniques. The agreement between HCU and CE for the detection of segmental wall motion abnormalities was 83% (Kappa = 0.58. There was good agreement for detecting significant mitral valve regurgitation (Kappa = 0.85, aortic regurgitation (kappa = 0.89, and tricuspid regurgitation (Kappa = 0.74. A complete evaluation of patients with stenotic and prosthetic dysfunctional valves, as well as pulmonary hypertension, was not possible using HCU due to its technical limitations in determining hemodynamic parameters. Conclusion Bedside evaluation using HCU is helpful for assessing cardiac chamber dimensions, left ventricular global and segmental function, and significant valvular regurgitation. However, it has limitations regarding hemodynamic assessment, an important issue in the cardiology inpatient setting.

  20. Study of low energy thermal constraints for a copper-plated niobium structure carried out by thermal projection

    International Nuclear Information System (INIS)

    Gassot, H.; Durante, M.; Thiebault, A.; Vernay, E.

    1999-06-01

    In the framework of T.T.F. (Tesla Test Facility), the international collaboration on research and development of superconducting cavities, a study of a new method of manufacturing cavities was launched, which consists in deposing a metal (copper) or an alloy by thermal projection on niobium cavities in order to stiffen them. Analytical and numerical calculations showed that when cooled this bi-material cavities behave very differently in comparison with classical pure niobium cavities and strong thermal constraints do occur in niobium as well as in copper. These strong constraints may have important consequences upon the functioning of superconducting cavities. In addition these constraints may induce in time cracks in materials and interfaces. In this paper an experiment for measuring constraints at the temperature of cavity operation, i.e., at the liquid helium temperature, is proposed in order to compare the measured constraints with the calculated constraints. The sample studied has a cylindrical shape, rather representative for the geometrical shape of cavities, but easier to handle than a prototype cavity. The experimental approach consists in carrying out two deformation measurements. The first one, is done on single material sample (niobium and copper) to establish the laws of compensation of the constraint gauges as a function of temperature. The other measurement establishes the global deformations of a bi-metallic tube (Nb-Cu) when the interior surface (niobium) and the external surface (porous copper) of the tube are cooled. From these deformation data the thermal constraints of the bi-metallic tube at low temperature have been derived. The implementation of the entire setup of the methods of measuring the constraints at low temperature constitutes a new development in the field of superconducting cavities. The experiments have also indicated certain further developments which should be achieved if the plastic deformations induced by the freezing regime

  1. Comparative study of probabilistic methodologies for small signal stability assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rueda, J.L.; Colome, D.G. [Universidad Nacional de San Juan (IEE-UNSJ), San Juan (Argentina). Inst. de Energia Electrica], Emails: joseluisrt@iee.unsj.edu.ar, colome@iee.unsj.edu.ar

    2009-07-01

    Traditional deterministic approaches for small signal stability assessment (SSSA) are unable to properly reflect the existing uncertainties in real power systems. Hence, the probabilistic analysis of small signal stability (SSS) is attracting more attention by power system engineers. This paper discusses and compares two probabilistic methodologies for SSSA, which are based on the two point estimation method and the so-called Monte Carlo method, respectively. The comparisons are based on the results obtained for several power systems of different sizes and with different SSS performance. It is demonstrated that although with an analytical approach the amount of computation of probabilistic SSSA can be reduced, the different degrees of approximations that are adopted, lead to deceptive results. Conversely, Monte Carlo based probabilistic SSSA can be carried out with reasonable computational effort while holding satisfactory estimation precision. (author)

  2. Gamma radiation stability studies of mercury fulminate

    International Nuclear Information System (INIS)

    Fondeur, F.F.

    2000-01-01

    Mercury fulminate completely decomposed in a gamma source (0.86 Mrad/h) after a dose of 208 Mrad. This exposure equates to approximately 2.4 years in Tank 15H and 4 years in Tank 12H, one of the vessels of concern. Since the tanks lost the supernatant cover layer more than a decade ago, this study suggests that any mercury fulminate or closely related energetic species decomposed long ago if ever formed

  3. Study of orbit stability in the SSRF storage ring

    International Nuclear Information System (INIS)

    Dai Zhimin; Liu Guimin; Huang Nan

    2003-01-01

    In this paper, analysis of the beam orbit stability and conceptual study of the dynamic orbit feedback in the SSRF storage ring are presented. It is shown that beam orbit position movement at the photon source points is smaller than the orbit stability requirements in horizontal plane, but exceeds the orbit stability requirements in vertical plane. A dynamic global orbit feedback system, which consists of 38 high-bandwidth air-coil correctors and 40 high-precise BPMs, is proposed to suppress the vertical beam orbit position movement. Numerical simulations show that this dynamic orbit feedback system can stabilize the vertical beam orbit position movement in the frequency range up to 100 Hz

  4. Stability study in one step steam generators

    International Nuclear Information System (INIS)

    Abbate, P.

    1990-01-01

    The TWO program is presented developed for the behaviour limit calculation stable in one step steam generators for the case of Density Waves phenomenom. The program is based on a nodal model which, using Laplace transformation equations, allows to study the system's transfer functions and foresee the beginning of the unstable behaviour. This program has been satisfactorily validated against channels data uniformly heated in the range from 4.0 to 6.0 Mpa. Results on the CAREM reactor's steam generator analysis are presented. (Author) [es

  5. A study of offshore wind HVDC system stability and control

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Hanchao; Sun, Jian [Rensselaer Polytechnic Institute, Troy, NY (United States). Dept. of Electrical, Computer and Systems Engineering

    2011-07-01

    This work is concerned with the stability and control of ac power collection buses in offshore wind farms with high-voltage dc (HVDC) transmission connection to onshore power grid. The focus of the work is high-frequency interactions among the wind turbines, the ac collection bus and the filters, as well as the HVDC rectifier. Both voltage-source converter and line-commutated converter based HVDC systems are considered. To study high-frequency stability, particularly harmonic resonance in the ac bus, small-signal impedance models are developed for the wind inverters and the HVDC rectifier by using harmonic linearization techniques. An impedance-based stability criterion is applied to assess system stability in both positive- and negative-sequence domain. Small-signal stability conditions and requirements are developed from analytical impedance models. Detailed system-level simulation is used to validated the small-signal analysis. The goal of the study is to develop system design and control techniques that minimize the cost of the offshore infrastructure while guaranteeing system stability and power quality. (orig.)

  6. Experimental and theoretical studies on stability of new stabilizers for N-methyl-P-nitroaniline derivative in CMDB propellants

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Qiufan [Xi’an Modern Chemistry Research Institute, Xi’an 710065 (China); Fan, Xuezhong, E-mail: xuezhongfan@126.com [Xi’an Modern Chemistry Research Institute, Xi’an 710065 (China); Li, Jizhen [Xi’an Modern Chemistry Research Institute, Xi’an 710065 (China); Key Laboratory of Applied Surface and Colloid Chemistry, MOE/School of Chemistry and Chemical Engineering, Shaanxi Normal University, Xi’an 710062 (China); Bi, Fuqiang; Fu, Xiaolong; Zhai, Lianjie [Xi’an Modern Chemistry Research Institute, Xi’an 710065 (China)

    2017-04-05

    Highlights: • Five new stabilizers have been designed and synthesized. • The influence of the carbon chain length on the stability of propellants was studied. • Effects of temperature on the reactions of stabilizers and nitrogen oxides were explained. • The new stabilizer n-BNA was one of the most promising stabilizers. - Abstract: Although N-methyl-P-nitroaniline (MNA) was a quite effective stabilizer in composite modified double base (CMDB) propellants, it undergoes crystallization easily from nitroglycerin (NG) during storage. In order to improve its solubility in nitroglycerin (NG) and the stability in propellants, several new stabilizers including N-ethyl-p-nitroaniline (ENA), N-n-propyl-p-nitroaniline (n-PNA), N-i-propyl-p-nitroaniline (i-PNA), N-n-butyl-p-nitroaniline (n-BNA) and N-t-butyl-p-nitroaniline (t-BNA) were designed and synthesized to replace MNA by increasing the carbon chain length. The interaction between NG and different stabilizers was simulation by Materials Studio 5.5 and the stability and the high temperature stability performance of those new stabilizers in propellants were calculated by Gaussian 09. It was found that both the solubility of new stabilizers in NG and the stability and the high temperature stability performance of those in propellants were improved when the carbon chain length of substitution groups on nitrogen atom was increased. Thus, the n-BNA was a most potential stabilizer. Then all properties of the stabilizers were studied experimentally, which was agreement well with the theoretical analysis.

  7. A Study on Load Carrying Capacity of Fly Ash Based Polymer Concrete Columns Strengthened Using Double Layer GFRP Wrapping

    Directory of Open Access Journals (Sweden)

    S. Nagan

    2014-01-01

    Full Text Available This paper investigates the suitability of glass fiber reinforced polymer (GFRP sheets in strengthening of fly ash based polymer members under compression. Experimental results revealed that load carrying capacity of the confined columns increases with GFRP sheets wrapping. Altogether 18 specimens of M30 and G30 grade short columns were fabricated. The G30 specimens were prepared separately in 8 molarity and 12 molarity of sodium hydroxide concentration. Twelve specimens for low calcium fly ash based reinforced polymer concrete and six specimens of ordinary Portland cement reinforced concrete were cast. Three specimens from each molarity fly ash based reinforced polymer concrete and ordinary Portland cement reinforced concrete were wrapped with double layer of GFRP sheets. The load carrying capacity of fly ash based polymer concrete was tested and compared with control specimens. The results show increase in load carrying capacity and ductility index for all strengthened elements. The maximum increase in load carrying capacity was 68.53% and is observed in strengthened G30 specimens.

  8. Newsprint coverage of smoking in cars carrying children: a case study of public and scientific opinion driving the policy debate.

    Science.gov (United States)

    Hilton, Shona; Wood, Karen; Bain, Josh; Patterson, Chris; Duffy, Sheila; Semple, Sean

    2014-10-29

    Media content has been shown to influence public understandings of second-hand smoke. Since 2007 there has been legislation prohibiting smoking in all enclosed public places throughout the United Kingdom (UK). In the intervening period, interest has grown in considering other policy interventions to further reduce the harms of second-hand smoke exposure. This study offers the first investigation into how the UK newsprint media are framing the current policy debate about the need for smoke-free laws to protect children from the harms of second-hand smoke exposure whilst in vehicles. Qualitative content analysis was conducted on relevant articles from six UK and three Scottish national newspapers. Articles published between 1st January 2004 and 16th February 2014 were identified using the electronic database Nexis UK. A total of 116 articles were eligible for detailed coding and analysis that focused on the harms of second-hand smoke exposure to children in vehicles. Comparing the period of 2004-2007 and 2008-2014 there has been an approximately ten-fold increase in the number of articles reporting on the harms to children of second-hand smoke exposure in vehicles. Legislative action to prohibit smoking in vehicles carrying children was largely reported as necessary, enforceable and presented as having public support. It was commonly reported that whilst people were aware of the general harms associated with second-hand smoke, drivers were not sufficiently aware of how harmful smoking around children in the confined space of the vehicle could be. The increased news reporting on the harms of second-hand smoke exposure to children in vehicles and recent policy debates indicate that scientific and public interest in this issue has grown over the past decade. Further, advocacy efforts might draw greater attention to the success of public-space smoke-free legislation which has promoted a change in attitudes, behaviours and social norms. Efforts might also specifically

  9. Doping control container for urine stabilization: a pilot study.

    Science.gov (United States)

    Tsivou, Maria; Giannadaki, Evangelia; Hooghe, Fiona; Roels, Kris; Van Gansbeke, Wim; Garribba, Flaminia; Lyris, Emmanouil; Deventer, Koen; Mazzarino, Monica; Donati, Francesco; Georgakopoulos, Dimitrios G; Van Eenoo, Peter; Georgakopoulos, Costas G; de la Torre, Xavier; Botrè, Francesco

    2017-05-01

    Urine collection containers used in the doping control collection procedure do not provide a protective environment for urine, against degradation by microorganisms and proteolytic enzymes. An in-house chemical stabilization mixture was developed to tackle urine degradation problems encountered in human sport samples, in cases of microbial contamination or proteolytic activity. The mixture consists of antimicrobial substances and protease inhibitors for the simultaneous inactivation of a wide range of proteolytic enzymes. It has already been tested in lab-scale, as part of World Anti-Doping Agency's (WADA) funded research project, in terms of efficiency against microbial and proteolytic activity. The present work, funded also by WADA, is a follow-up study on the improvement of chemical stabilization mixture composition, application mode and limitation of interferences, using pilot urine collection containers, spray-coated in their internal surface with the chemical stabilization mixture. Urine in plastic stabilized collection containers have been gone through various incubation cycles to test for stabilization efficiency and analytical matrix interferences by three WADA accredited Laboratories (Athens, Ghent, and Rome). The spray-coated chemical stabilization mixture was tested against microorganism elimination and steroid glucuronide degradation, as well as enzymatic breakdown of proteins, such as intact hCG, recombinant erythropoietin and small peptides (GHRPs, ipamorelin), induced by proteolytic enzymes. Potential analytical interferences, observed in the presence of spray-coated chemical stabilization mixture, were recorded using routine screening procedures. The results of the current study support the application of the spray-coated plastic urine container, in the doping control collection procedure. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  10. Final inform of the studies carried out by the Geological Institute of Uruguay in the zone of Paso Severino of Santa Lucia small river

    International Nuclear Information System (INIS)

    1973-01-01

    This inform is about the geological conditions study carried out in Paso Severino zone of the Santa Lucia small river to make a dam to provide water to Montevideo. The techniques used were photo interpretation and general geological studies.

  11. Experimental study of pedicle screw stability on low BMD vertebrae

    International Nuclear Information System (INIS)

    Li Qi; Yang Huilin; Tang Tiansi; Wu Yiwei; Wang Yijin

    2005-01-01

    Objective: To conduct biomechanical study of different pedicle screws stability on spinal specimen, discuss the relationship between design parameter of screw, insertion torgue and BMD, establish the theoretical foundation for application of pedicle screw on osteoporotic patients. Methods: Six fixed lumbar cadavers were collected, the effects of design parameter, insertion torque and etc on fixation stability were determined under various BMD by using biomechanical ways. Results: According to in vitro study: (1) There was a significant difference among pullout strength of all screws (P 2 >U 1 >SF 1 >SF 2 >RF. Conclusions: There is a close correlated between type of screw, BMD and stability. The U-type screw displays the best fixation effect on specimen of low BMD. (authors)

  12. Wastewater Sludge Stabilization Using Lime A Case Study of West Ahwaz Wastewater Treatment Plant

    Directory of Open Access Journals (Sweden)

    Mehdi Farzadkia

    2009-01-01

    Full Text Available Lime stabilization is a chemical method used for wastewater sludge stabilization. It is capable of decreasing large quantities of pathogens and of preventing microbial degradation of sludge organic materials. The main objective of the present experimental research was to investigate stabilization of the sludge from west Ahwaz wastewater treatment plant by lime addition and to control if the microbial quality of this sludge conforms to the USEPA standards for sludge reuse and safe disposal. The study was carried out on a pilot scale in 5 stages over a period of 12 months (July 2005 to June 2006 at west Ahwaz wastewater treatment plant laboratory using raw sludge. For the purposes of this study, a 30-liter reactor was commissioned and loaded with sludge and appropriate quantities of hydrated lime were added based on the solid waste percent. The parameters used to determine stabilization efficiency were pH, Total Coliform, Fecal Coliform, and parasite eggs. The results showed that lime addition at a ratio of 265g Ca(OH2/kg. ds was the optimum level for sludge stabilization in westAhwazwastewater treatment plant, which is acceptable from both economic and technical viewpoints. The method is capable of achieving class B but never satisfied class A of USEPA standards.

  13. Study on tourist carrying capacity of sustainable tourism---by taking Qingliang Mountain in the south-eastern china as an example

    Science.gov (United States)

    Jin, Shenglang; Liu, Ting

    2017-05-01

    This paper analyzed measurable problems of tourist carrying capacity and then studied the corresponding measures by adopting theories and methods of environment sciences. Tourist carrying capacity of Qingliang Mountain was studied by analyzing the system of tourism environment capacity. The results showed that the level of service was 9726, which was smaller than the ecological carrying capacity of 12894. The facilities and spatial capacity were identified as key factors to limit the tourist carrying capacity in Qingliang Mountain. Some advices and measures including newly built and rebuilt basic facilities, construction of management methods for slack and peak tourist season respectively, construction of new sight spot and touring path were discussed to improve the tourist carrying capacity of Qingliang Mountain and solve the problems of overloading of tourists in the peak season.

  14. Thermodynamic stability studies of Ce-Sb compounds with Fe

    Science.gov (United States)

    Xie, Yi; Zhang, Jinsuo; Benson, Michael T.; Mariani, Robert D.

    2018-02-01

    Lanthanide fission products can migrate to the fuel periphery and react with cladding, causing fuel-cladding chemical interaction (FCCI). Adding a fuel additive dopant, such as Sb, can bind lanthanide, such as Ce, into metallic compounds and thus prevent migration. The present study focuses on the thermodynamic stability of Ce-Sb compounds when in contact with the major cladding constituent Fe by conducting diffusion couple tests. Ce-Sb compounds have shown high thermodynamic stability as they did not react with Fe. When Fe-Sb compounds contacted with Ce, Sb was separated out of Fe-Sb compounds and formed the more stable Ce-Sb compounds.

  15. Stability notions in synthetic graph generation: a preliminary study

    NARCIS (Netherlands)

    van Leeuwen, W.; Fletcher, G.H.L.; Yakovets, N.; Bonifati, A.; Markl, Volker; Orlando, Salvatore; Mitschang, Bernhard

    2017-01-01

    With the rise in adoption of massive graph data, it be- comes increasingly important to design graph processing algorithms which have predictable behavior as the graph scales. This work presents an initial study of stability in the context of a schema-driven synthetic graph generation. Specifically,

  16. Studies on storage stability of radurised Indian Mackerel (Rastrelliger Kanagurta)

    International Nuclear Information System (INIS)

    Ghadi, S.V.; Alur, M.D.; Venugopal, V.; Doke, S.N.; Ghosh, S.K.; Lewis, N.F.; Nadkarni, G.B.

    1977-01-01

    The present report describes the storage stability of mackerel maintained at various temperatures (0deg-20degC). The investigations include radiation-induced shifts in microflora of mackerel during storage, and time-temperature-tolerance (TTT) studies with the unirradiated and radurized mackerel. (author)

  17. [A study concerning how much weight schoolchildren carry in their bags, involving four schools in the metropolitan area of Buenos Aires, Argentina].

    Science.gov (United States)

    Laíño, Fernando A; Santa María, Claudio J; Bazán, Nelio E; Mainero, Daniel D

    2013-01-01

    Determining the weight children carry in their bags to school (absolute and relative values) and the distance walked during home-school routes, involving students from four schools in the metropolitan area of Buenos Aires. The study involved 751 primary (4th to 6th grades) and secondary (1st to 3rd years) level students who were attending three private schools and one public one. Body and bag weights were measured and the children were asked about the distance (in blocks) they walked from school to home. The study involved a descriptive analysis and contrasted the students by gender, educational level, type of school and grade or year. Possible associations between variables were ascertained. The group was divided into those carrying bags weighing less than 10% of their body weight and those who carrying 10% (considered a critical value) and more; frequencies were calculated by the type of bag being used. 68% of the sample were carrying 10% or more of their body weight (P42=10.13%): 66% in male (P44=10.12%) and 60% in female children (P40=10.2%). Private school students carried more weight than public school children (p<0.05) and younger students carried a greater weight than older students (p<0.05) in both educational levels. Most children were carrying relative weights well above that recommended and female students were most affected. Younger students carried higher absolute and relative weights.

  18. Carrying Out Municipal Tasks in the Scope of Housing Stock Management – Case Study of Poznań City

    Directory of Open Access Journals (Sweden)

    Trojanek Maria

    2014-10-01

    Full Text Available The municipal real estate stock, including housing, serves as an asset base in the process of carrying out statutory tasks by the municipality. Due to the numerous functions of municipal housing in socioeconomic development and its influence on people’s living conditions, it is essential that local governments manage the stock with particular rationality and effectiveness. Management activities differ according to the aim, type and functions of the stock. This paper discusses conditions and potential benefits for the municipality from replacing budgetary units with commercial companies that take over the statutory tasks of municipalities in the field of public social housing and providing the right conditions to enable people’s housing needs to be met. Furthermore, the author presents possible financial settlement forms resulting from leasing municipal housing to commercial companies.

  19. Stability studies of colloidal silica dispersions in binary solvent mixtures

    International Nuclear Information System (INIS)

    Bean, Keith Howard

    1997-01-01

    A series of monodispersed colloidal silica dispersions, of varying radii, has been prepared. These particles are hydrophilic in nature due to the presence of surface silanol groups. Some of the particles have been rendered hydrophobic by terminally grafting n-alkyl (C 18 ) chains to the surface. The stability of dispersions of these various particles has been studied in binary mixtures of liquids, namely (i) ethanol and cyclohexane, and (ii) benzene and n-heptane. The ethanol - cyclohexane systems have been studied using a variety of techniques. Adsorption excess isotherms have been established and electrophoretic mobility measurements have been made. The predicted stability of the dispersions from D.V.L.O. calculations is compared to the observed stability. The hydrophilic silica particles behave as predicted by the calculations, with the zeta potential decreasing and the van der Waals attraction increasing with increasing cyclohexane concentration. The hydrophobic particles behave differently than expected, and the stability as a function of solvent mixture composition does not show a uniform trend. The effect of varying the coverage of C 18 chains on the surface and the effect of trace water in the systems has also been investigated. Organophilic silica dispersions in benzene - n-heptane solvent mixtures show weak aggregation and phase separation into a diffuse 'gas-like' phase and a more concentrated 'liquid-like' phase, analogous to molecular condensation processes. Calculations of the van der Waals potential as a function of solvent mixture composition show good agreement with the observed stability. Determination of the number of particles in each phase at equilibrium allows the energy of flocculation to be determined using a simple thermodynamic relationship. Finally, the addition of an AB block copolymer to organophilic silica particles in benzene n-heptane solvent mixtures has been shown to have a marked effect on the dispersion stability. This stability

  20. Solidifications/stabilization treatability study of a mixed waste sludge

    International Nuclear Information System (INIS)

    Spence, R.D.; Stine, E.F.

    1996-01-01

    The Department of Energy Oak Ridge Operations Office signed a Federal Facility Compliance Agreement with the US Environmental Protection Agency Region IV regarding mixed wastes from the Oak Ridge Reservation (ORR) subject to the land disposal restriction provisions of the Resource Conservation and Recovery Act (RCRA). This agreement required treatability studies of solidification/stabilization (S/S) on mixed wastes from the ORR. This paper reports the results of the cementitious S/S studies conducted on a waste water treatment sludge generated from biodenitrification and heavy metals precipitation. For the cementitious waste forms, the additives tested were Portland cement, ground granulated blast furnace slag, Class F fly ash, and perlite. The properties measured on the treated waste were density, free-standing liquid, unconfined compressive strength, and TCLP performance. Spiking up to 10,000, 10,000, and 4,400 mg/kg of nickel, lead, and cadmium, respectively, was conducted to test waste composition variability and the stabilization limitations of the binding agents. The results indicated that nickel, lead and cadmium were stabilized fairly well in the high pH hydroxide-carbonate- ''bug bones'' sludge, but also clearly confirmed the established stabilization potential of cementitious S/S for these RCRA metals

  1. Triphenylamine - a 'new' stabilizer for nitrocellulose based propellants. Pt. 1: chemical stability studies

    Energy Technology Data Exchange (ETDEWEB)

    Wilker, Stephan; Heeb, Gerhard [WIWEB ASt Heimerzheim, Grosses Cent, 53913 Swisttal (Germany); Vogelsanger, Beat [Nitrochemie Wimmis AG, Niesenstr. 44, 3752 Wimmis (Switzerland); Petrzilek, Jan; Skladal, Jan [Explosia a.s. - Research Institute of Industrial Chemistry (VUPCH), 532 17 Pardubice (Czech Republic)

    2007-04-15

    Triphenylamine (TPA) was used for the first time in France in 1937 as a stabilizer for propellants. The stability of those samples was described as 'good'. Around 1950 an American group produced TPA stabilized propellants and investigated the decomposition mechanism. Apart from one single experiment in the 1970s no further attempts were made to take TPA as a stabilizer for propellants. With the background of an increasingly critical discussion about nitrosamines in propellants and their declaration of being carcinogenic, TPA revealed a renaissance since the year 2000. To achieve the goal of nitrosamine free propellants several TPA stabilized propellants were produced. Their processability, stability and ballistic properties were investigated. This publication summarizes the most important results of stability tests on more than 30 different TPA stabilized propellants including the decomposition mechanism, the synthesis of the consecutive products and their stabilizing properties. In addition, the internal compatibility of TPA with the most important propellant ingredients is discussed and its relative decomposition rate is compared with that of other stabilizers. In summary TPA is a suitable stabilizer for propellants. It has nevertheless two disadvantages. It is relatively rapidly consumed in double base formulations (which makes it difficult to pass the criteria of AOP-48, Ed. 2) and the stabilizing activity of the two major consecutive products 4-NO{sub 2}-TPA and especially 4,4{sup '}-di-NO{sub 2}-TPA is low. (Abstract Copyright [2007], Wiley Periodicals, Inc.)

  2. A qualitative study exploring student midwives' experiences of carrying a caseload as part of their midwifery education in England.

    Science.gov (United States)

    Rawnson, Stella

    2011-12-01

    To explore student midwives' experiences of caseloading to develop an understanding of how they perceive this educational strategy has impacted on their learning journey to becoming a midwife. A qualitative approach drawing upon the principles of grounded theory. Data were collected by in-depth semi-structured interviews. A university in the South of England providing undergraduate pre-registration midwifery education across Advanced Diploma and BSc (Hons) programmes. Eight Caucasian female final-year student midwives aged 23-50 years who had completed their caseloading experience. One core category ('making it good') and four major categories emerged: (1) 'developing and managing caseload', (2) 'learning partnerships', (3) 'feeling like a midwife' and (4) 'afterwards'. The core category was reflected in all the other categories and was dependent upon them. Students identified caseloading as a highly beneficial learning approach, facilitating application of theory to practice and acquisition of new skills promoting confidence and competence in practice. Students articulated an overwhelming desire and concern to meet and facilitate women's expectations. Perceptions of letting the woman down evoked feelings of inadequacy and failure. Flexible working practices, on-call commitment and carrying a caseload alongside academic and home commitments was, for many, emotionally stressful. Effective preparation of students for the realities of caseloading, the development of realistic caseloads that take account of the student's individual situation, and the provision of supportive frameworks are essential. Copyright © 2010 Elsevier Ltd. All rights reserved.

  3. Potential capabilities at LAMPF to study nuclei far from stability

    International Nuclear Information System (INIS)

    Talbert, W.L.; Bunker, M.E.

    1985-01-01

    Feasibility studies have shown that a He-jet activity transport line, with a target chamber placed in the LAMPF main beam line, will provide access to short-lived isotopes of a number of elements that cannot be extracted efficiently for study at any other type of on-line facility. The He-jet technique requires targets thin enough to allow a large fraction of the reaction products to recoil out of the target foils; hence, a very intense incident beam current, such as that uniquely available at LAMPF, is needed to produce yields of individual radioisotopes sufficient for detailed nuclear studies. We present the results of feasibility experiments on He-jet transport efficiency and timing. We also present estimates on availability of nuclei far from stability from both fission and spallation processes. Areas of interest for study of nuclear properties far from stability will be outlined. 17 refs

  4. Outdoor Operational Stability of Indium-Free Flexible Polymer Solar Modules Over 1 Year Studied in India, Holland, and Denmark

    DEFF Research Database (Denmark)

    Angmo, Dechan; Sommeling, Paul M.; Gupta, Ritu

    2014-01-01

    We present an outdoor interlaboratory stability study of fully printed and coated indium-tin-oxide (ITO)-free polymer solar cell modules in JNCASR Bangalore (India), ECN (Holland), and DTU (Denmark) carried over more than 1 year. The modules comprising a fully printed and coated stack (Ag grid...

  5. A study about the long-term stability of sedimentary rock

    International Nuclear Information System (INIS)

    Yoshino, Naoto; Miyanomae, Shun-ichi; Inoue, Hiroyuki; Nashimoto, Yutaka

    2005-02-01

    In this paper, following two issues were examined and estimated, (1) the influence of near field condition factor to the dynamical behavior of sedimentary soft rock, (2) the long term estimation of the dynamical behavior considering the condition of Horonobe area. As the study about the influence of near field condition factor to the dynamical behavior of sedimentary soft rock, the thermal factor was focused on and the laboratory tests using test pieces which were sampled in Horonobe area were carried out under the water temperature were 20 degrees and 80 degrees. As a result, the time dependence parameter in variable-compliance-type constitutive-equation could be obtained. And comparison between creep property under 20 degrees and 80 degrees was conducted. In addition, the general properties of sedimentary soft rock under several conditions were identified by the survey of the literature. And the way how to confirm the dynamical properties of sedimentary soft rock with in-situ test were presented. For the study on the short-term and long-term stability of rock surrounding buffer materials, numerical simulations were carried out assuming several conditions. The direction of disposal tunnels and the ratio of rock strength by initial stress were estimated to be the main factor affecting the short-term stability of rock. Time dependency of rock and the stiffness of buffer material were estimated to be the main factor affecting the long-term stability of rock. (author)

  6. Simulation studies on stability of hot electron plasma

    International Nuclear Information System (INIS)

    Ohsawa, Yukiharu

    1985-01-01

    Stability of a hot electron plasma in an NBT(EBT)-like geometry is studied by using a 2-1/2 dimensional relativistic, electromagnetic particle code. For the low-frequency hot electron interchange mode, comparison of the simulation results with the analytical predictions of linear stability theory show fairly good agreement with the magnitude of the growth rates calculated without hot electron finite Larmor radius effects. Strong stabilizing effects by finite Larmor radius of the hot electrons are observed for short wavelength modes. As for the high-frequency hot electron interchange mode, there is a discrepancy between the simulation results and the theory. The high-frequency instability is not observed though a parameter regime is chosen in which the high-frequency hot electron interchange mode is theoretically predicted to grow. Strong cross-field diffusion in a poloidal direction of the hot electrons might explain the stability. Each particle has a magnetic drift velocity, and the speed of the magnetic drift is proportional to the kinetic energy of each particle. Hence, if the particles have high temperature, the spread of the magnetic drift velocity is large. This causes a strong cross-field diffusion of the hot electrons. In the simulation for this interchange mode, an enhanced temperature relaxation is observed between the hot and cold electrons although the theoretically predicted high frequency modes are stable. (Nogami, K.)

  7. A study on occlusal stability in shortened dental arches.

    Science.gov (United States)

    Sarita, Paulo T N; Kreulen, Cees M; Witter, Dick J; van't Hof, Martin; Creugers, Nico H J

    2003-01-01

    The aim of this study was to verify the hypothesis that shortened dental arches constitute a risk to occlusal stability. Using cluster samples, 725 subjects with shortened dental arches comprising intact anterior regions and zero to eight occluding pairs of posterior teeth and 125 subjects with complete dental arches were selected. Subjects with shortened dental arches were classified into eight categories according to arch length and symmetry. Parameters for occlusal stability were interdental spacing, occlusal tooth wear, occlusal contact of incisors in intercuspal position, and vertical and horizontal overlap. Additionally, tooth mobility and overeruption of unopposed teeth were assessed. Influence of independent variables (dental arch category, age, gender, and residence) on the parameters for occlusal stability was assessed by one-way ANOVA and Tukey's multiple range tests. Extreme shortened dental arches (zero to two pairs of occluding premolars) had significantly more interdental spacing, occlusal contact of incisors, and vertical overlap compared to complete dental arches. Occlusal wear and prevalence of mobile teeth were highest in these categories. The category with three to four occluding premolars had significantly more interdental spacing and, for the older age group, more anterior teeth in occlusal contact compared to complete dental arches. Age was consistently associated with increased changes in occlusal integrity. Signs of increased risk to occlusal stability seemed to occur in extreme shortened dental arches, whereas no such evidence was found for intermediate categories of shortened dental arches.

  8. Applying the methodology of Design of Experiments to stability studies: a Partial Least Squares approach for evaluation of drug stability.

    Science.gov (United States)

    Jordan, Nika; Zakrajšek, Jure; Bohanec, Simona; Roškar, Robert; Grabnar, Iztok

    2018-05-01

    The aim of the present research is to show that the methodology of Design of Experiments can be applied to stability data evaluation, as they can be seen as multi-factor and multi-level experimental designs. Linear regression analysis is usually an approach for analyzing stability data, but multivariate statistical methods could also be used to assess drug stability during the development phase. Data from a stability study for a pharmaceutical product with hydrochlorothiazide (HCTZ) as an unstable drug substance was used as a case example in this paper. The design space of the stability study was modeled using Umetrics MODDE 10.1 software. We showed that a Partial Least Squares model could be used for a multi-dimensional presentation of all data generated in a stability study and for determination of the relationship among factors that influence drug stability. It might also be used for stability predictions and potentially for the optimization of the extent of stability testing needed to determine shelf life and storage conditions, which would be time and cost-effective for the pharmaceutical industry.

  9. Stability analysis of a recycling circuit of a BWR type reactor. Theoretical study

    International Nuclear Information System (INIS)

    Salinas H, J.G.; Espinosa P, G.; Gonzalez M, V.M.

    2000-01-01

    The Technology, Regulation and Services Management of the National Commission of Nuclear Safety and Safeguards financed and in coordinate form with the I.P.H. Department of the Metropolitan Autonomous-Iztapalapa University developed the present project with the purpose of studying the effect of the recycling system on the linear stability of a BWR reactor whose reference central is the Laguna Verde power station. The present project forms part of a work series focused to the linear stability of the nuclear reactor of the Unit 1 at Laguna Verde power station. The components of the recycling system considered for the study of stability are the recycling external circuit (recycling pumps, valves) and the internal circuit (downcomer, jet pumps, lower full, driers, separators). The mathematical model is obtained applying mass balances and movement quantity in each one of the mentioned circuits. With respect to the nucleus model two regions are considered, the first one is made of a flow in one phase and the second one of a flow in two phases. For modelling the biphasic region it is considered homogenous flow. Generally it is studied the system behavior in the frequency domain starting from the transfer function applied to four operational states which correspond to the lower stability zone in the map power-flow of the Unit 1 of Laguna Verde power station. The Nyquist diagrams corresponding to each state as well as their characteristic frequency were determined. The results show that exists a very clear dependence of the power-flow relation on the stability of the system. It was found that the boiling length is an important parameter for the linear stability of the system. The obtained results show that the characteristic frequencies in unstability zones are similar to the reported data of the Unit 1 of the Laguna Verde power station in the event of power oscillations carried out in January 1995. (Author)

  10. Case studies of slope stability radar used in coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Noon, D. [GroundProbe Pty Ltd., South Brisbane, Qld. (Australia)

    2005-07-01

    This paper presents case studies about how the Slope Stability Radar (SSR) system provided adequate warning to safeguard people and equipment prior to highwall and low wall failure at two Australian coal mines. At Drayton mine, the SSR was able to provide the mine with sufficient warning to move the shovel and trucks away from the highwall, while personnel safely watched 50,000 tonnes of bulk material coming down from the wall. At Mt Owen mine, the SSR alarm allowed the mine to evacuate equipment and personnel four hours prior to a 30,000,000 tonne low wall failure. These two case studies demonstrate how the SSR system was able to continuously monitor the stability of these critical slopes, enabling greater mine productivity whilst maintaining the highest quality of safety. 2 refs., 7 figs., 1 tab.

  11. Establishment of an equivalence acceptance criterion for accelerated stability studies.

    Science.gov (United States)

    Burdick, Richard K; Sidor, Leslie

    2013-01-01

    In this article, the use of statistical equivalence testing for providing evidence of process comparability in an accelerated stability study is advocated over the use of a test of differences. The objective of such a study is to demonstrate comparability by showing that the stability profiles under nonrecommended storage conditions of two processes are equivalent. Because it is difficult at accelerated conditions to find a direct link to product specifications, and hence product safety and efficacy, an equivalence acceptance criterion is proposed that is based on the statistical concept of effect size. As with all statistical tests of equivalence, it is important to collect input from appropriate subject-matter experts when defining the acceptance criterion.

  12. Reliability and validity of general health questionnaire (GHQ-12) for male tannery workers: a study carried out in Kanpur, India.

    Science.gov (United States)

    Kashyap, Gyan Chandra; Singh, Shri Kant

    2017-03-21

    The purpose of this study was to test the reliability, validity and factor structure of GHQ-12 questionnaire on male tannery workers of India. We have tested three different factor models of the GHQ-12. This paper used primary data obtained from a cross-sectional household study of tannery workers from Jajmau area of the city of Kanpur in northern India, which was conducted during January-June, 2015, as part of a doctoral program. The study covered 286 tannery workers from the study area. An interview schedule containing GHQ-12 was used for tannery workers who had completed at least 1 year at their present occupation preceding the survey. To test reliability, Cronbach's alpha test was used. The convergent test was used for validity. Confirmatory factor analysis was used to compare three factor structures for the GHQ-12. A total of 286 samples were analyzed in this study. The mean age of the tannery workers in this study was 38 years (SD = 1.42). We found the alpha coefficient to be 0.93 for the complete sample. The value of alpha represents the acceptable internal consistency for all the groups. Each item of scale showed almost the same internal consistency of 0.93 for the male tannery workers. The correlation between factor 1 (Anxiety and Depression) and factor 2 (Social Dysfunction) was 0.92. The correlation between factor 1 (Anxiety and Depression) and factor 3 (Loss of confidence) was the highest 0.98. Comparative fit index (CFI) estimate best-fitted for model-III that gave the CFI value 0.97. The SRMR indicator gave the lowest value 0.031 for the model-III. The findings suggest that the Hindi version of GHQ-12 is a reliable and valid tool for measuring psychological distress in male tannery workers of Kanpur city, India. Study found that the model proposed by the Graetz was the best fitted model for the data.

  13. The 'Hothaps' programme for assessing climate change impacts on occupational health and productivity: an invitation to carry out field studies.

    Science.gov (United States)

    Kjellstrom, Tord; Gabrysch, Sabine; Lemke, Bruno; Dear, Keith

    2009-11-11

    The 'high occupational temperature health and productivity suppression' programme (Hothaps) is a multi-centre health research and prevention programme aimed at quantifying the extent to which working people are affected by, or adapt to, heat exposure while working, and how global heating during climate change may increase such effects. The programme will produce essential new evidence for local, national and global assessment of negative impacts of climate change that have largely been overlooked. It will also identify and evaluate preventive interventions in different social and economic settings.Hothaps includes studies in any part of the world where hourly heat exposure exceeds physiological stress limits that may affect workers. This usually happens at temperatures above 25 degrees C, depending on humidity, wind movement and heat radiation. Working people in low and middle-income tropical countries are particularly vulnerable, because many of them are involved in heavy physical work, either outdoors in strong sunlight or indoors without effective cooling. If high work intensity is maintained in workplaces with high heat exposure, serious health effects can occur, including heat stroke and death.Depending on the type of occupation, the required work intensity, and the level of heat stress, working people have to slow down their work in order to reduce internal body heat production and the risk of heat stroke. Thus, unless preventive interventions are used to reduce the heat stress on workers, their individual health and productivity will be affected and economic output per work hour will be reduced. Heat also influences other daily physical activities, unrelated to work, in all age groups. Poorer people without access to household or workplace cooling devices are most likely to be affected.The Hothaps programme includes a pilot study, heat monitoring of selected workplaces, qualitative studies of perceived heat impacts and preventative interventions

  14. Characterization and stability studies of emulsion systems containing pumice

    Directory of Open Access Journals (Sweden)

    Marilene Estanqueiro

    2014-04-01

    Full Text Available Emulsions are the most common form of skin care products. However, these systems may exhibit some instability. Therefore, when developing emulsions for topical application it is interesting to verify whether they have suitable physical and mechanical characteristics and further assess their stability. The aim of this work was to study the stability of emulsion systems, which varied in the proportion of the emulsifying agent cetearyl alcohol (and sodium lauryl sulfate (and sodium cetearyl sulfate (LSX, the nature of the oily phase (decyl oleate, cyclomethicone or dimethicone and the presence or absence of pumice (5% w/w. While maintaining the samples at room temperature, rheology studies, texture analysis and microscopic observation of formulations with and without pumice were performed. Samples were also submitted to an accelerated stability study by centrifugation and to a thermal stress test. Through the testing, it was found that the amount of emulsifying agent affects the consistency and textural properties such as firmness and adhesiveness. So, formulations containing LSX (5% w/w and decyl oleate or dimethicone as oily phase had a better consistency and remained stable with time, so exhibited the best features to be used for skin care products.

  15. Optical Carry Adder.

    Science.gov (United States)

    1987-03-01

    AOM’s) with the deflected beam as the modulator "on" state. These AOM’s ( TeO2 crystals, manufactured by Newport E.O. Systems) have high deflection...caused by the slow acoustic propagation (4.2 - 105 cm/s for TeO2 ), but this delay can be minimized by placing the laser beam close to the acoustic...dependent jitter in the optical carry to below 1 ns, the total carry path must be less than 30 cm long (or 20 cm in glass , 14 cm in LiNbO 3). Thus, a 32

  16. How can professionals carry out recognition towards children of parents with alcohol problems? A qualitative interview study.

    Science.gov (United States)

    Werner, Anne; Malterud, Kirsti

    2017-02-01

    The aim of this study was to explore informal adult support experienced by children with parental alcohol problems to understand how professionals can show recognition in a similar way. We conducted a qualitative interview study with retrospective accounts from nine adults growing up with problem-drinking parents. Data were analysed with systematic text condensation. Goffman's concept "frame" offered a lens to study how supportive situations were defined and to understand opportunities and limitations for translation of recognition acts and attitudes to professional contexts. Analysis demonstrated frames of commonplace interaction where children experienced that adults recognised and responded to their needs. However, the silent support from an adult who recognised the problems without responding was an ambiguous frame. The child sometimes felt betrayed. Concentrating on frames of recognition which could be passed over to professional interactions, we noticed that participants called for a safe harbour, providing a sense of normality. Being with friends and their families, escaping difficulties at home without having to tell, was emphasised as important. Recognition was experienced when an adult with respect and dignity offered an open opportunity to address the problems, without pushing towards further communication. Our study indicates some specific lessons to be learnt about recognition for professional service providers from everyday situations. Frames of recognition, communicating availability and normality, and also unconditional confidentiality and safety when sharing problems may also be offered by professionals in public healthcare within their current frames of competency and time.

  17. Study of oxidation stability of Jatropha curcas biodiesel/ diesel blends

    Energy Technology Data Exchange (ETDEWEB)

    Jain, Siddharth; Sharma, M.P. [Biofuel Research Laboratory, Alternate Hydro Energy Centre, Indian Institute of Technology Roorkee, Uttarakhand- 247667 (India)

    2011-07-01

    Biodiesel production is undergoing rapid technological reforms in industries and academia. This has become more obvious and relevant since the recent increase in the petroleum prices and the growing awareness relating to the environmental consequences of the fuel overdependency. However, the possibilities of production of biodiesel from edible oil resources in India is almost impossible, as primary need is to first meet the demand of edible oil that is already imported therefore it is essential to explore non-edible seed oils, like Jatropha curcas and Pongamia as biodiesel raw materials. The oxidation stability of biodiesel from Jatropha curcas oil is very poor. Therefore the aim of the present paper is to study the oxidation stability of Jatropha curcas biodiesel/ diesel blend. Also the effectiveness of various antioxidants is checked with respect to various blends of biodiesel with diesel.

  18. Life sciences payload definition and integration study. Volume 2: Requirements, design, and planning studies for the carry-on laboratories. [for Spacelab

    Science.gov (United States)

    1974-01-01

    The task phase concerned with the requirements, design, and planning studies for the carry-on laboratory (COL) began with a definition of biomedical research areas and candidate research equipment, and then went on to develop conceptual layouts for COL which were each evaluated in order to arrive at a final conceptual design. Each step in this design/evaluation process concerned itself with man/systems integration research and hardware, and life support and protective systems research and equipment selection. COL integration studies were also conducted and include attention to electrical power and data management requirements, operational considerations, and shuttle/Spacelab interface specifications. A COL program schedule was compiled, and a cost analysis was finalized which takes into account work breakdown, annual funding, and cost reduction guidelines.

  19. An experimental and numerical study of the atmospheric stability impact on wind turbine wakes

    DEFF Research Database (Denmark)

    Machefaux, Ewan; Larsen, Gunner Chr.; Koblitz, Tilman

    2016-01-01

    campus test site. Wake measurements are averaged within a mean wind speed bin of 1 m s1 and classified according to atmospheric stability using three different metrics: the Obukhov length, the Bulk–Richardson number and the Froude number. Three test cases are subsequently defined covering various...... atmospheric conditions. Simulations are carried out using large eddy simulation and actuator disk rotor modeling. The turbulence properties of the incoming wind are adapted to the thermal stratification using a newly developed spectral tensor model that includes buoyancy effects. Discrepancies are discussed......In this paper, the impact of atmospheric stability on a wind turbine wake is studied experimentally and numerically. The experimental approach is based on full-scale (nacelle based) pulsed lidar measurements of the wake flow field of a stall-regulated 500 kW turbine at the DTU Wind Energy, Risø...

  20. Orthodontic treatment stability predictors: A retrospective longitudinal study.

    Science.gov (United States)

    de Bernabé, Paloma González-Gil; Montiel-Company, José María; Paredes-Gallardo, Vanessa; Gandía-Franco, Jose Luis; Bellot-Arcís, Carlos

    2017-03-01

    To examine medium- to long-term orthodontic treatment stability and its possible association with certain variables. In a retrospective longitudinal study of 70 postretention patients, the Peer Assessment Rating (PAR) index was measured at the start (T1) and end (T2) of treatment and between 4 and 10 years afterwards (T3). The stability was considered absolute when the T2 and T3 values were identical and relative when the difference was within the ±5 range. Among the 70 patients, 65.8% were female and 34.2% were male. Their mean age was 14.5 years. The mean treatment length was 2.4 years. The mean retention phase was 3.3 years. The mean pre- and posttreatment PAR scores were 29.8 (T1) and 6.3 (T2). The mean T1-T2 difference was 23.6. The mean T2-T3 difference was -0.39. Within the study, 7.1% presented absolute stability and 68.6% presented relative stability. Lower anterior segment alignment and overbite were the most unstable occlusal features and tended to worsen. Fixed retainer (odds ratio [OR] 0.31; 95% confidence interval [CI] 0.10-0.98) as a protective factor and years without retention (OR 1.32; 95% CI 1.03-1.68) as a risk factor are predictor variables of instability in the case of lower anterior segment alignment. The PAR value at the end of treatment (OR 1.29; 95% CI 1.08-1.54) and extractions (OR 4.76; 95% CI 1.05-21.6) before treatment are predictors for midline instability.

  1. The importance of carry out studies about the use of passive autocatalytic recombiners for hydrogen control in reactors type ESBWR

    International Nuclear Information System (INIS)

    Sanchez J, J.; Morales S, J. B.

    2009-10-01

    A way to satisfy and to guarantee the energy necessities in the future is increasing in a gradual way the creation of nuclear power plants, introducing advanced designs in its systems that contribute in way substantial in the security of the same nuclear plants. The tendency of new designs of these nuclear plants is the incorporation of systems more reliable and sure, and that the operation does not depend on external factors as the electric power, motors diesel or the action of the operator of nuclear plant, what is known as security passive systems. In this sense, the passive autocatalytic recombiners are a contribution toward the use of this type of systems. At the present time it is had studies of the incorporation of passive autocatalytic recombiners in nuclear plants in operation and that they have contributed to minimize the danger associated to hydrogen. The present work contains a first approach to the study of hydrogen recombiners incorporation in advanced nuclear plants, for this case in a nuclear power plant of ESBWR type. To achieve our objective it seeks to use specialized codes as RELAP/SCDAP to obtain simulations of passive autocatalytic recombiners behaviour and we can to estimate their operation inside the reactor contention, contemplating the possibility to use other codes like SCILAB and/or MATLAB for the simulation of a passive autocatalytic recombiner. (Author)

  2. Study and Design of a Compact Fuel Carrying (Holding) System of a Nuclear-Thermal Propulsion Device

    International Nuclear Information System (INIS)

    Sultan, R.

    2012-01-01

    Humankind is exploratory by nature and stepping on Mars and beyond is the next frontier of space explorations. In order to achieve these ambitions, novel techniques for propulsion are needed because existing chemical rockets fail to fulfill such missions. Many efforts are underway to find the best alternative. All these efforts justify that nuclear thermal propulsion (NTR) is an ideal option for acquiring this goal. To study the feasibility and develop a conceptual model for indigenous development of this technology has been the objectives of this work. In this work, detailed study pertaining to nuclear thermal propulsion has been done by considering hardware issues, operational aspects and safety issues. Proposed long stay manned Mars mission by NASA has been considered for design specification than a simplified NTR is designed to find various essential parameters like vehicle differential velocity, mass flow rates and exhaust propellant velocity. Next, temperature contours for its geometry (with simplified assumptions) involving reactor core and converging-diverging nozzle is modeled and analyzed using Gambit 2.0 and Fluent 6.1. Then some detail is provided for its future proposed development phases as planned by NASA. Analysis from our design show feasibility of the proposed development of NTR, however, further research on material technology is needed to withhold such high temperatures around 2500 degree C. It is also recommended that neutronic design for mission specific systems may be performed. (author)

  3. Brasov people’s fears after EU accession. Study carried out at the level of Brasov Municipality

    Directory of Open Access Journals (Sweden)

    Claudiu COMAN

    2012-01-01

    Full Text Available This study is part of a wider research, a compared type based sociological survey using the questionnaire, applied in Brasov during January 2010 and June 2010: "Effects of the EU integration perceived at the level of Brasov community and its implications on life quality and styles." By trying to explain precisely these effects of European integration (as research objective it was found that, in the scientific literature, the subject of the EU integration effort was oriented by means of the utilitarian theory (Gabel, 1998. Other international studies have also put in evidence that public opinion on EU integration matters, is determined by economic considerations and personal calculations such as cost-benefit (Anderson, 1995; Eichenberg and Dalton, 1993; Gabel, 1998. Using secondary analysis of the 2010 database and by following the proposed model of Ioan Mărginean, Iuliana PrecupeŃu and Ana Maria Preoteasa (2004 regarding the development of a measurement model of the post-accession EU fears, adapted to the Brasov realities and based on three dimensions (the sphere of private life, the sphere of social life and the relationship between the individual and the society, the statistical analysis provides new clues upon the types, the categories and the attitudinal fears profiles found in Brasov and their correlation with a new global factor - the economic crisis.

  4. Experimental study on stabilizing range extension of diamagnetic levitation under modulated magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Chow, T C S; Wong, P L; Liu, K P, E-mail: 50578230@student.cityu.edu.h, E-mail: meplwong@cityu.edu.h, E-mail: mekpliu@cityu.edu.h [Manufacturing Engineering and Engineering Management Department, City University of Hong Kong, Tat Chee Avenue, Kowloon (Hong Kong)

    2010-01-01

    The real energy-free levitation exists with the help of diamagnetic material. Its ultra-high sensitivity to force is particularly attractive to micro/nano force sensing. A key parameter: Levitation Stabilizing Local Range, LR (allowable moving range of the floater) is critical to the load and self-rotating performance. Besides, larger LR reduces the energy loss due to the eddy current and has greater application potential. Recently, an idea of extending the LR by a modulating coil array has been validated using numerical simulation. This paper takes the next move to carry out an experimental study on the shape effect of stacked coil arrays with different currents on LR.

  5. Trials carried out on corrosive (fluorinated) atmosphere vacuum gauges

    International Nuclear Information System (INIS)

    Constant, M.; Houyvet, A.; Noe, P.

    1966-01-01

    Study of the stability of readings given by a modified Pirani type measurement probe with a view to long term operation in the presence of corrosive gases. Results of measurements carried out before and after use under these conditions. (author) [fr

  6. Considerations on the studies carried at I.R.S.N. for the estimation of Chernobylsk accident consequences in France

    International Nuclear Information System (INIS)

    2005-07-01

    The present document that limits the consideration to the action of one stakeholder, I.R.S.N., answers very partly to the public questioning on the Chernobylsk crisis management in France. The documents allow nevertheless to emphasize: a gap between the society expectations and the public information possibilities of I.R.S.N. that in the eighties was in the Cea in charge of research and expertise and not in charge of radiation monitoring in environment; an effort of this Institute since the tenth anniversary of the disaster to begin a dialogue with the civil society especially by answering, from a succession of studies and works on the field, to the questioning on the impact of the disaster in France. It can be understood, at the reading of questions and answers received by the public organism of research and expertise that there is a link between this judgement by the public opinion of the part played by the Institute in the crisis management and the evolutions that have been decided by the Public Authorities relative to the status and the place of I.P.S.N. (Institute of nuclear protection and safety) and O.P.R.I. (Organism of protection against ionizing radiation) in the system of nuclear control (first self government then independence). (N.C.)

  7. Studies and activities in the field of chemical toxicology carried out by the service d'hygiene industrielle

    International Nuclear Information System (INIS)

    Chalabreysse, J.; Archimbaud, M.; Teulon, F.

    1988-02-01

    The Service d'Hygiene Industrielle (Industrial hygiene service, Institute of protection and nuclear safety, Department of health protection - IPSN-DPS) has acquired an unquestionable proficiency in chemical toxicology on account of 1) its missions of research on and monitoring of workers, working conditions and the environment on the Tricastin industrial complex and 2) of its actions of technical assistance to the CEA group and of valorization outside the group. The report presents how toxicological hazards originated from the use of chemical products by the nuclear industry are taken into consideration. A global methodology of assessment of chemical-toxicological hazards has been developed; it is based on the experience gained in various occupational branches (nuclear and non-nuclear industry, agriculture, administrations,...). The Service d'hygiene industrielle is developing R and D studies in the field of biology and analytical chemistry based on the present knowledge and doctrine in radiotoxicology (uranium especially). The contribution of radiation protection and radiotoxicology to non-nuclear industrial hygiene can thus be appreciated [fr

  8. "Carrying Ibuprofen in the Bag": Priority Health Concerns of Latin American Migrants in Spain- A Participatory Qualitative Study.

    Directory of Open Access Journals (Sweden)

    Maria Roura

    Full Text Available An estimated 2.7 million Latin Americans reside in Europe, mostly in Spain. Part of a broader project aimed at developing a research agenda on the health status and determinants of this population, this qualitative study engaged Latin American migrants in the identification of research priorities.We conducted 30 group discussions between November 2012-March 2013 with 84 participants purposively selected for maximum diversity in Madrid and Barcelona (Spain. We facilitated sequences of task-oriented visual activities to explore their views on priority health concerns. We tape-recorded and transcribed discussions and developed a coding frame based on socio-ecological frameworks, which we applied to all the data using NVIVO-10. A final round of eight group discussions allowed us to triangulate and enrich interpretations by including participants' insights.The cumulative toll of daily stresses was the major health concern perceived by a population that conceptualised ill-health as a constellation of symptoms rather than as specific diseases. Work-related factors, legislative frameworks regulating citizenship entitlements and feeling ethnically discriminated were major sources of psycho-social strain. Except for sexually transmitted infections, participants rarely referred to communicable diseases as a concern. The perception that clinicians systematically prescribed painkillers discouraged health seeking and fostered self-medication. Participants felt that the medicalised, chemicalised, sexually liberal and accelerated culture of the host society damaged their own, and the local populations' health.Health systems bear a disproportionate responsibility in addressing health problems rooted in other sectors. Occupational and migration policies should be recognised explicitly as health policies. The mismatch between researchers' emphasis on communicable infections and the health concerns of Latin American migrants highlights the need for greater

  9. Bioengineering case studies sustainable stream bank and slope stabilization

    CERN Document Server

    Goldsmith, Wendi; McCullah, John

    2014-01-01

    This unique volume describes and evaluates 30 projects from across the United States where bio-stabilization was employed to address a detrimental naturally occurring process or byproduct of the built environment. Bio-stabilization (or soil bioengineering) refers to the use of plant materials, primarily live cuttings, arranged in the ground in different arrays to reinforce soils and protect upland slopes and/or stream banks against surficial erosion and shallow slope failures. Examples included in the collection represent different regions of the country and their specific conditions and challenges. Each project is illustrated with a number of distinctive photographs to support the reader's understanding and showcase the wide scope of projects and techniques presented. This book also: ·         Presents a range of well-documented case studies on key techniques and best practices for bio-stabilization projects ·         Emphasizes evaluation and comparison of different techniques and challeng...

  10. Biodistribution and stability studies of [18F]Fluoroethylrhodamine B, a potential PET myocardial perfusion agent

    International Nuclear Information System (INIS)

    Gottumukkala, Vijay; Heinrich, Tobias K.; Baker, Amanda; Dunning, Patricia; Fahey, Frederic H.; Treves, S. Ted; Packard, Alan B.

    2010-01-01

    Introduction: Fluorine-18-labeled rhodamine B was developed as a potential positron emission tomography (PET) tracer for the evaluation of myocardial perfusion, but preliminary studies in mice showed no accumulation in the heart suggesting that it was rapidly hydrolyzed in vivo in mice. A study was therefore undertaken to further evaluate this hypothesis. Methods: [ 18 F]Fluoroethylrhodamine B was equilibrated for 2 h at 37 deg. C in human, rat and mouse serum and in phosphate-buffered saline. Samples were removed periodically and assayed by high-performance liquid chromatography. Based on the results of the stability study, microPET imaging and a biodistribution study were carried out in rats. Results: In vitro stability studies demonstrated that [ 18 F]fluoroethylrhodamine B much more stable in rat and human sera than in mouse serum. After 2 h, the compound was >80% intact in rat serum but 18 F-labeled rhodamines should accumulate in the heart. Conclusions: [ 18 F]Fluoroethylrhodamine B is more stable in rat and human sera than it is in mouse serum. This improved stability is demonstrated by the high uptake of the tracer in the rat heart in comparison to the absence of visible uptake in the mouse heart. These observations suggest that 18 F-labeled rhodamines are promising candidates for more extensive evaluation as PET tracers for the evaluation of myocardial perfusion.

  11. Numerical studies of transverse curvature effects on transonic flow stability

    Science.gov (United States)

    Macaraeg, M. G.; Daudpota, Q. I.

    1992-01-01

    A numerical study of transverse curvature effects on compressible flow temporal stability for transonic to low supersonic Mach numbers is presented for axisymmetric modes. The mean flows studied include a similar boundary-layer profile and a nonsimilar axisymmetric boundary-layer solution. The effect of neglecting curvature in the mean flow produces only small quantitative changes in the disturbance growth rate. For transonic Mach numbers (1-1.4) and aerodynamically relevant Reynolds numbers (5000-10,000 based on displacement thickness), the maximum growth rate is found to increase with curvature - the maximum occurring at a nondimensional radius (based on displacement thickness) between 30 and 100.

  12. Present stage of the use of radioactive tracers in studies carried out at Companhia de Tecnologia de Saneamento Ambiental, SP, Brazil, in the field of environmental engineering

    International Nuclear Information System (INIS)

    Sanchez, W.; Agudo, E.G.

    1979-01-01

    Studies using radioactive tracers in the field of environmental engineering, carried out at Companhia de Tecnologia de Saneamento Ambiental, SP, Brazil, from 1975 to 1978 are presented. Future research to be developed in this area is also discussed. (M.A.) [pt

  13. Long-term psychological impact of carrying a BRCA1/2 mutation and prophylactic surgery: a 5-year follow-up study

    NARCIS (Netherlands)

    van Oostrom, Iris; Meijers-Heijboer, Hanne; Lodder, Litanja N.; Duivenvoorden, Hugo J.; van Gool, Arthur R.; Seynaeve, Caroline; van der Meer, Conny A.; Klijn, Jan G. M.; van Geel, Bert N.; Burger, Curt W.; Wladimiroff, Juriy W.; Tibben, Aad

    2003-01-01

    To explore long-term psychosocial consequences of carrying a BRCA1/2 mutation and to identify possible risk factors for long-term psychological distress. Five years after genetic test disclosure, 65 female participants (23 carriers, 42 noncarriers) of our psychological follow-up study completed a

  14. Studying the Factors Influencing a Choice of Devices for Carrying Out Inhalations on the Basis of Statistical Processing of Results Of Questionnaire

    Directory of Open Access Journals (Sweden)

    Galina A. Kharchenko

    2016-05-01

    Full Text Available Authors set the object, to study the factors influencing a choice of buyers of devices for carrying out inhalation on the basis of statistical processing of results of questionnaire of buyers, to analyze interrelation between the factors influencing a choice and purchase of the device and gender and age characteristics of potential buyers. The role of the doctor, worker of a drugstore, the Internet sites in the course of a choice, opinion of consumers of different age categories on the most preferable sources of information on devices for carrying out inhalation is revealed, preferences of buyers at a choice of a place of commission of purchase of devices for carrying out inhalation are defined. Feature of respondents of sources of information and making decision on purchase, female and male concerning use is shown.

  15. Study of physicochemical stability of the copper/polyphenylquinoxaline interfaces

    Science.gov (United States)

    Even, R.; Palleau, J.; Oberlin, J. C.; Pantel, R.; Laviale, D.; Templier, F.; Torres, J.; Giustiniani, R.; Cros, A.

    Thin film technologies are now applied in building up multilayered chip to chip interconnections to achieve agressive requirement such as high electrical performance or extreme compactness. Copper as conductor and a new polymeric material, a poly phenyl quinoxaline, as dielectric have been chose to fulfill demanding electrical and physical conditions. Thermal stability at the interface Cu/polymer and polymer/Cu during polymer curing process is very important to preserve good adhesion between the conductor and dielectric materials. We have studied in this work the interfacial behavior as a function of annealing temperature and of annealing atmosphere.

  16. GIS and agent based spatial-temporal simulation modeling for assessing tourism social carrying capacity: a study on Mount Emei scenic area, China

    Science.gov (United States)

    Zhang, Renjun

    2007-06-01

    Each scenic area can sustain a specific level of acceptance of tourist development and use, beyond which further development can result in socio-cultural deterioration or a decline in the quality of the experience gained by visitors. This specific level is called carrying capacity. Social carrying capacity can be defined as the maximum level of use (in terms of numbers and activities) that can be absorbed by an area without an unacceptable decline in the quality of experience of visitors and without an unacceptable adverse impact on the society of the area. It is difficult to assess the carrying capacity, because the carrying capacity is determined by not only the number of visitors, but also the time, the type of the recreation, the characters of each individual and the physical environment. The objective of this study is to build a spatial-temporal simulation model to simulate the spatial-temporal distribution of tourists. This model is a tourist spatial behaviors simulator (TSBS). Based on TSBS, the changes of each visitor's travel patterns such as location, cost, and other states data are recoded in a state table. By analyzing this table, the intensity of the tourist use in any area can be calculated; the changes of the quality of tourism experience can be quantized and analyzed. So based on this micro simulation method the social carrying capacity can be assessed more accurately, can be monitored proactively and managed adaptively. In this paper, the carrying capacity of Mount Emei scenic area is analyzed as followed: The author selected the intensity of the crowd as the monitoring Indicators. it is regarded that longer waiting time means more crowded. TSBS was used to simulate the spatial-temporal distribution of tourists. the average of waiting time all the visitors is calculated. And then the author assessed the social carrying capacity of Mount Emei scenic area, found the key factors have impacted on social carrying capacity. The results show that the TSBS

  17. Study plan for evaluating carrying capacity: Measure 7.1A of the Northwest Power Planning Council's 1994 Fish and Wildlife Program. Report 2 of 4, Final report

    International Nuclear Information System (INIS)

    Neitzel, D.A.; Johnson, G.E.

    1996-05-01

    This report is one report of four that the Pacific Northwest National Laboratory (PNNL) staff used to address Measure 7.1A in the Northwest Power Planning Council's (Council) fish and Wildlife Program (Program) dated December 1994 (NPPC 1994). Measure 7.1A calls for the Bonneville Power Administration (BPA) to fund an evaluation of salmon survival, ecology, carrying capacity, and limiting factors in freshwater, estuarine, and marine habitats. Additionally, the Measure asks for the development of a study plan based on the critical uncertainties and research needs identified during the evaluation. In the evaluation of carrying capacity the authors concluded that defining capacity and listing the determinants of capacity is not a simple exercise. Capacity is a complex variable among the attributes that all together define salmon performance. To pursue the capacity parameter, that is, a single number or set of numbers that quantify how many salmon the basin or any part of the basin can support, will not lead to the development of a useful study plan. To increase understanding of ecology, carrying capacity, and limiting factors, it is necessary to deal with the complexity of the sustained performance of salmon in the Columbia River Basin. This report describes the elements of a study plan that could be used to increase the understanding of ecology, carrying capacity, and limiting factors that influence salmon survival under current conditions

  18. Is lesional stability in vitiligo more important than disease stability for performing surgical interventions? results from a multicentric study

    Directory of Open Access Journals (Sweden)

    Imran Majid

    2016-01-01

    Full Text Available Background: Ensuring stability of the disease process is essential for undertaking surgical intervention in vitiligo. However, there is no consensus regarding the minimum duration of stability or the relative importance of disease and lesional stability in selecting patients for vitiligo grafting. Aim: This multicentric study aims to assess the relative importance of lesional and disease stability on selecting patients for vitiligo grafting. Materials and Methods: One hundred seventy patients were recruited into the study and divided into two groups: Group A with lesional stability of >1 year but overall disease stability of only 6-11 months and Group B with overall disease stability of >1 year. Patients underwent either tissue or cellular vitiligo grafting on the selected lesions and the repigmentation achieved was scored from 0 (no repigmentation to 6 (100% repigmentation. Repigmentation achieved on different sites of the body was compared between the two groups. Adverse effects at both the donor and the recipient sites were also compared. Results: Of the 170 patients who were enrolled, 82 patients were placed in Group A and 88 patients in Group B. Average repigmentation achieved (on scale of 0 to 6 was 3.8 and 4.04 in Group A and Group B, respectively. In Group A, ≥90% repigmentation was achieved in 36.6% (30/82 patients, while 37.5% (33/88 achieved similar results in Group B. Additionally, 47.6% (39/82 and 53.4% (47/88 of cases achieved partial repigmentation in Group A and Group B, respectively. Perigraft halo was the commonest adverse effect observed in both groups. Statistical analysis revealed no significant differences between the two groups with respect to the repigmentation achieved or adverse effects observed. Repigmentation achieved was the best on the face and neck area, while acral areas responded the least. Conclusions: Lesional stability seems to be as relevant as the overall disease stability in selecting patients for

  19. Thermal stability of thiol and silane monolayers: A comparative study

    International Nuclear Information System (INIS)

    Chandekar, Amol; Sengupta, Sandip K.; Whitten, James E.

    2010-01-01

    The stability of self-assembled monolayers (SAMs) at elevated temperatures is of considerable technological importance. The thermal stability of 1-octadecanethiol (ODT), 16-mercaptohexadecanoic acid (MHDA) and 1H,1H,2H,2H-perfluorodecanethiol (PFDT) SAMs on gold surfaces, and of 4-aminobutyltriethoxysilane (ABTES) and 1H, 1H, 2H, 2H-perfluorodecyltriethoxysilane (PFDS) assembled on hydroxylated silicon surfaces, was studied by X-ray photoelectron spectroscopy (XPS). The samples were heated in ultrahigh vacuum to temperatures in excess of that required for SAM degradation. ODT monolayers were stable to ca. 110 deg. C, while MHDA and PFDT SAMs were stable to ca. 145 deg. C. ABTES SAMs were found to be indefinitely stable to 250 deg. C, while PFDS SAMs were stable to 350 deg. C. These studies demonstrate the advantages of using silane monolayers for moderate to high temperature applications and illustrate differences that arise due to the nature of the tail group. To demonstrate the feasibility of silanes for template-directed patterning, a hydroxylated silicon oxide surface containing microcontact-printed PFDS patterns was spin-coated with a mainly hydrophilic block copolymer. Annealing the surface at 90 deg. C for 2 h caused the block copolymer to dewet the hydrophobic PFDS-patterned regions and adsorb exclusively on the unpatterned regions of the surface.

  20. Monitoring and analysis of technology transfer and intellectual property regimes and their use results of a study carried out on behalf of the European Commission (DG Research)

    CERN Document Server

    Van Eecke, Patrick; Bolger, P; Truyens, M

    2008-01-01

    This report presents the results of a three-year study commissioned by the European Commission (DG Research) regarding the monitoring, analysis and use of technology transfer and intellectual property regimes in the European Union. This study was organised in the context of the 6th Framework Programme for R&D, and was jointly carried out by law firms Mason Hayes+Curran (Dublin) and DLA Piper (Brussels).

  1. Synthesis, Antibacterial and Thermal Studies of Cellulose Nanocrystal Stabilized ZnO-Ag Heterostructure Nanoparticles

    Directory of Open Access Journals (Sweden)

    Mohd Zobir Hussein

    2013-05-01

    Full Text Available Synthesis of ZnO-Ag heterostructure nanoparticles was carried out by a precipitation method with cellulose nanocrystals (CNCs as a stabilizer for antimicrobial and thermal studies. ZnO-Ag nanoparticles were obtained from various weight percentages of added AgNO3 relative to Zn precursors for evaluating the best composition with enhanced functional properties. The ZnO-Ag/CNCs samples were characterized systematically by TEM, XRD, UV, TGA and DTG. From the TEM studies we observed that ZnO-Ag heterostructure nanoparticles have spherical shapes with size diameters in a 9–35 nm range. The antibacterial activities of samples were assessed against the bacterial species Salmonella choleraesuis and Staphylococcus aureus. The CNC-stabilized ZnO-Ag exhibited greater bactericidal activity compared to cellulose-free ZnO-Ag heterostructure nanoparticles of the same particle size. The incorporation of ZnO-Ag hetreostructure nanoparticles significantly increased the thermal stability of cellulose nanocrystals.

  2. Thermal Stabilization study of polyacrylonitrile fiber obtained by extrusion

    Directory of Open Access Journals (Sweden)

    Robson Fleming Ribeiro

    2015-12-01

    Full Text Available A low cost and environmental friendly extrusion process of the Polyacrylonitrile (PAN polymer was viabilized by using the 1,2,3-propanetriol (glycerol as a plasticizer. The characterization of the fibers obtained by this process was the object of study in the present work. The PAN fibers were heat treated in the range of 200 °C to 300 °C, which is the temperature range related to the stabilization/oxidation step. This is a limiting phase during the carbon fiber processing. The characterization of the fibers was made using infrared spectroscopy, thermal analysis and microscopy. TGA revealed that the degradation of the extruded PAN co-VA fibers between 250 °C and 350 °C, corresponded to a 9% weight loss to samples analyzed under oxidizing atmosphere and 18% when the samples were analyzed under inert atmosphere. DSC showed that the exothermic reactions on the extruded PAN co-VA fibers under oxidizing synthetic air was broader and the cyclization started at a lower temperature compared under inert atmosphere. Furthermore, FT-IR analysis correlated with thermal anlysis showed that the stabilization/oxidation process of the extruded PAN fiber were coherent with other works that used PAN fibers obtained by other spinning processes.

  3. Research of quality values and stability study of vaginal suppositories containing fluconazole and chlorhexidine digluconate

    Directory of Open Access Journals (Sweden)

    Катерина Олександрівна Бур’ян

    2015-10-01

    Full Text Available Aim of research. Stability is one of the main quality values of remedies. Biopharmaceutical properties of drugs and efficiency of pharmacodynamic and pharmacokinetic processes of active compounds in human’s organism completely depend on physico-chemical values permanence and microbiological stability of every unit of drug. The aim of research resulting in the article was to determine the main quality values stability and microbiological purity of vaginal suppositories containing fluconazole and chlorhexidine digluconate after storage under certain conditions.Materials and methods. During both storage under room temperature and keeping in cool place vaginal suppositories prepared upon hydrophilic basis were periodically verified on indicators of description, identification, average weight and homogeneity of weight, dissolution, microbiological purity and active ingredients assay in unit dose. All research tests were carried out in accordance with both the SPhU requirements and elaborated draft of quality control procedures for «Flugedyn» remedy.Results. As a result of quality values study of suppositories test samples the efficiency and reliability of developed techniques and normative documentation draft of remedy were confirmed. Samples have been kept for as long as 5 years don’t comply with the requirements of normative documentation of remedy.Conclusion. Thus, summation of research data allow recommend following optimal storage period for vaginal suppositories «Flugedyn»: keep 3 years in dry place at a temperature 2 to 25 оС

  4. Development and stability studies of sunscreen cream formulations containing three photo-protective filters

    Directory of Open Access Journals (Sweden)

    Slim Smaoui

    2017-02-01

    Full Text Available The present study aimed to formulate and subsequently evaluate sunscreen cream (W/O/W emulsion containing three photo-protective filters: benzophenone-3, ethylhexyl methoxycinnamate and titanium dioxide at different percentages. Formulations were stored at 8, 25 and 40 °C for four weeks to investigate their stability. Color, centrifugation, liquefaction, phase separation, pH and Sun Protection Factor (SPF of sunscreen cream formulations were determined. The microbiological stability of the creams was also evaluated and the organoleptic quality was carried out for 28 days. Interestingly, the combination of 7% Benzophenone-3, 7% Ethylhexyl methoxycinnamate and 6% Titanium dioxide preserved physicochemical properties of the product and was efficient against the development of different spoilage microorganisms as well as aerobic plate counts, Pseudomonas aeruginosa, Staphylococcus aureus, and yeast and mold counts. Furthermore, a good stability was observed for all formulations throughout the experimental period. The newly formulated sunscreen cream was proved to exhibit a number of promising properties and attributes that might open new opportunities for the development of more efficient, safe, and cost-effective skin-care, cosmetic, and pharmaceutical products.

  5. Students with Attention Deficit Disorder Carrying out Tasks of Reading Comprehension and Text Production: A Comparative Study in 4th-Grade Students of Primary Education in Chile

    OpenAIRE

    Fabián Andrés Inostroza-Inostroza

    2017-01-01

    The present article aims to compare the performance in students with Attention Deficit Disorder to those who do not present it, in tasks of reading comprehension and text production carried out by students attending the fourth grade of primary education. This quantitative, non-experimental comparative study aims to provide evidence regarding the way in which this condition limits the learning outcomes in the tasks of comprehension and production of texts, language, and communication. One the ...

  6. Parametric study of ternary ettringite-based systems for radwaste solidification and stabilization

    International Nuclear Information System (INIS)

    Martin, I.; Patapy, C.; Cyr, M.; Boher, C.; Avril, D.

    2015-01-01

    Currently, there is a demand in furthering technological solutions to embed radioactive waste. A kind of this waste produced during the reprocessing of nuclear fuel is characterized by high pH sensitivity. Some organic matrixes (e.g. bitumen) developed to condition this waste are currently reconsidered by nuclear safety regulators. Therefore the cementation in ettringite systems might be a promising solution to solidify and stabilize this radioactive waste. Calcium Aluminate Cement (CAC) are planned to be used, instead of Ordinary Portland Cement (OPC), to form a significant amount of ettringite able to catch water molecules when forming. Moreover, due to the low pH of CAC-based matrixes, the latter have a good compatibility with the compounds used to stabilize active elements. However, the heat generated by hydration and the chemistry of waste require additional components. This paper details the investigations carried out on the CAC systems combined with Supplementary Cementing Materials. First theoretical studies show the main characteristics of reaction for the blends - especially: kinetics and type of hydrates formed, pH and chemistry of pore solution. Formulations are optimized to be in accordance with the stability of high pH sensitivity radioactive waste. Thereafter, parametric experiments including simulated waste are realized to study the rheological and the heat properties of the mixes. It appears that an increase in sulfate content ensures the formation and stability of ettringite and can greatly decrease the pH of pore solutions due to the formation of ettringite/AH 3 in a larger extent. Results show that increasing slag content in the CAC system reduces the heat generated during hydration and that the addition of quartz filler in simulated wastes has increased the nucleation surface

  7. SiPM Gain Stabilization Studies for Adaptive Power Supply

    CERN Document Server

    AUTHOR|(CDS)2074257; Zalieckas, Justas; Cvach, Jaroslav; Kvasnicka, Jiri; Polak, Ivo

    2016-01-01

    We present herein gain stabilization studies of SiPMs using a climate chamber at CERN. We present results for four detectors not tested before, three from Hamamatsu and one from KETEK. Two of the Hamamatsu SiPMs are novel sensors with trenches that reduce cross talk. We use an improved readout system with a digital oscilloscope controlled with a dedicated LabView program. We improved and automized the analysis to deal with large datasets. We have measured the gain-versus-bias-voltage dependence at fixed temperature and gain-versus-temperature dependence at fixed bias voltage to determine the bias voltage dependence on temperature $V(T)$ for stable gain. We show that the gain remains stable to better than $\\pm 0.5\\%$ in the $20^\\circ \\rm C - 30^\\circ C$ temperature range if the bias voltage is properly adjusted with temperature.

  8. Plutonium Finishing Plant. Interim plutonium stabilization engineering study

    Energy Technology Data Exchange (ETDEWEB)

    Sevigny, G.J.; Gallucci, R.H.; Garrett, S.M.K.; Geeting, J.G.H.; Goheen, R.S.; Molton, P.M.; Templeton, K.J.; Villegas, A.J. [Pacific Northwest Lab., Richland, WA (United States); Nass, R. [Nuclear Fuel Services, Inc. (United States)

    1995-08-01

    This report provides the results of an engineering study that evaluated the available technologies for stabilizing the plutonium stored at the Plutonium Finishing Plant located at the hanford Site in southeastern Washington. Further processing of the plutonium may be required to prepare the plutonium for interim (<50 years) storage. Specifically this document provides the current plutonium inventory and characterization, the initial screening process, and the process descriptions and flowsheets of the technologies that passed the initial screening. The conclusions and recommendations also are provided. The information contained in this report will be used to assist in the preparation of the environmental impact statement and to help decision makers determine which is the preferred technology to process the plutonium for interim storage.

  9. Plutonium Finishing Plant. Interim plutonium stabilization engineering study

    International Nuclear Information System (INIS)

    Sevigny, G.J.; Gallucci, R.H.; Garrett, S.M.K.; Geeting, J.G.H.; Goheen, R.S.; Molton, P.M.; Templeton, K.J.; Villegas, A.J.; Nass, R.

    1995-08-01

    This report provides the results of an engineering study that evaluated the available technologies for stabilizing the plutonium stored at the Plutonium Finishing Plant located at the hanford Site in southeastern Washington. Further processing of the plutonium may be required to prepare the plutonium for interim (<50 years) storage. Specifically this document provides the current plutonium inventory and characterization, the initial screening process, and the process descriptions and flowsheets of the technologies that passed the initial screening. The conclusions and recommendations also are provided. The information contained in this report will be used to assist in the preparation of the environmental impact statement and to help decision makers determine which is the preferred technology to process the plutonium for interim storage

  10. Numerical study of the axisymmetric ideal MHD stability of Extrap

    International Nuclear Information System (INIS)

    Benda, M.

    1993-04-01

    A numerical study of the free-boundary axisymmetric (n=0) ideal magnetohydrodynamical (MHD) motions of the Extrap device is presented. The dependence of stability on current profiles in the plasma and currents in the external conductors is investigated. Results are shown for linear growth-rates and nonlinear saturation amplitudes and their dependence on plasma radius as well as on the conducting shell radius. A method combined of two different algorithms has been developed and tested. The interior region of the plasma is simulated by means of a Lagrangian Finite Element Method (FEM) for ideal magnetohydrodynamics, The method is based on a nonlinear radiation principle for the Lagrangian description of ideal MHD. The Boundary Element Method (BEM) is used together with the Lagrangian FEM to simulate nonlinear motion of an ideal MHD plasma behaviour in a vacuum region under the influence of external magnetic fields. 31 refs

  11. Stability studies on refined soybean oil stored in various conditions

    International Nuclear Information System (INIS)

    Arawande, J.O.; Amoo, I.A.

    2008-01-01

    The 12 months stability study of freshly produced refined soybean oil revealed that refined soybean oil stored in plastic containers in dark was more hydrolytically and oxidatively stable than that stored in other containers in light condition. There was no significant difference at P < 0.05 in free fatty acids and acid value of oil stored under light and dark conditions in tin and glass containers but there was significant difference at P < 0.05 in peroxide value of oil stored in light and dark conditions in all the storage containers. Light increased the degree of oxidative rancidity of refined soybean oil, the most in tin containers, followed by glass containers and the least in plastic containers. (author)

  12. A neutron scattering study on the stability of trehalose mycolates under thermal stress

    Science.gov (United States)

    Migliardo, F.; Salmeron, C.; Bayan, N.

    2013-10-01

    The present paper is focused on the study of the dynamics of mycolic acids, which are fundamental components of the outer membrane (mycomembrane) of Mycobacterium tuberculosis. An elastic neutron scattering study of mycolic acid/H2O and lecithin/H2O mixtures as a function of temperature and exchanged wavevector Q has been carried out. This study provides an effective way for characterizing the dynamical properties, furnishing a set of parameters characterizing the different flexibility and rigidity of the investigated lipids. The behavior of the elastically scattered intensity profiles and the derived mean square displacements as a function of temperature shows a more marked temperature dependence for lecithin lipids in comparison with mycolic acids, so revealing a higher thermal stability of these latter. These findings could be useful for understanding the dynamics-function relation in the mycomembrane and then to relate it to the low permeability and high resistance of mycobacteria to many antibiotics.

  13. Experimental studies of flame stability limits of biogas flame

    International Nuclear Information System (INIS)

    Dai Wanneng; Qin Chaokui; Chen Zhiguang; Tong Chao; Liu Pengjun

    2012-01-01

    Highlights: ► Premixed biogas flame stability for RTBs was studied on different conditions. ► An unusual “float off” phenomenon was observed. ► Decrease of port diameter or gas temperature or methane content motivates lifting. ► Increase of methane content or gas temperature or port diameter motivates yellow tipping. ► Lifting curves become straight lines when semi-logarithmic graph paper is applied. - Abstract: Flame stability of premixed biogas flame for Reference Test Burner (RTB) was investigated. In this study, six kinds of test gases were used to simulate biogas in which CO 2 volume fraction varied from 30% to 45%. A series of experiments were conducted on two RTBs with different port diameters and at different outlet unburned mixture temperatures. It was found that the lifting and yellow tipping limits show similar trends regardless of the biogas components, port diameters and mixture temperatures. A “float off” phenomenon could be observed at low gas flow rate and low primary air ratio. Low mixture temperature, small ports and high CO 2 concentration in biogas can lead to the unstable condition of “float off”. The lifting limits are enhanced with an increase of port diameter or mixture temperature and with a decrease of CO 2 concentration. The yellow tipping limits are extended with an increase of CO 2 concentration and with a decrease of mixture temperature or port diameter. In addition, the lifting limit curve becomes a straight line when semi-logarithmic graph paper is applied. The intercept increases with a decrease of the CO 2 concentration in biogas and with an increase of port diameter or gas temperature.

  14. Study on the thermal-hydraulic stability of high burn up STEP III fuel in Japan

    International Nuclear Information System (INIS)

    Ishikawa, M.; Kitamura, H.; Toba, A.; Omoto, A.

    2004-01-01

    Japanese BWR utilities have performed a joint study of the Thermal Hydraulic Stability of High Burn up STEP III Fuel. In this study, the parametric dependency of thermal hydraulic stability threshold was obtained. It was confirmed through experiments that the STEP III Fuel has sufficient stability characteristics. (author)

  15. Water ecological carrying capacity of urban lakes in the context of rapid urbanization: A case study of East Lake in Wuhan

    Science.gov (United States)

    Ding, Lei; Chen, Kun-lun; Cheng, Sheng-gao; Wang, Xu

    With the excessive development of social economy, water scarcity and water environment deterioration become a common phenomenon in metropolis. As a crucial component of urban water environment system, urban lake is mainly influenced by social economic system and tourism system. In this paper, a framework for quantitatively evaluating development sustainability of urban lake was established by a multi-objective model that represented water ecological carrying capacity (WECC). And nine key indicators including population, irrigation area, tourist quantity, the average number of hotel daily reception, TP, TN, CODMn, BOD5 were chosen from urban social-economy system and natural resilience aspects, with their index weight was determined by using the Structure Entropy Weight method. Then, we took Wuhan East Lake, the largest urban lake in China as a case study, and selected five time sections including 2002, 2004, 2007, 2009 and 2012 to synthetically evaluate and comparatively analyze the dynamic change of WECC. The results showed that: firstly, the water ecological carrying capacity values of the East Lake in five time sections were 1.17, 1.07, 1.64, 1.53 and 2.01 respectively, which all exceeded 1 and increased fluctuation. The rapid growth of population and GDP lead to sharply increasing demand for water quantity. However, a large amount of the domestic sewage and industrial waste led by economic development increases pressure on ecological environment of urban lakes. Secondly, the carrying capacity of the East Lake for tourist activities was still low. The value in 2012 was only 0.22, keeping at a slowly increasing phase, which indicates that the East Lake has large opportunity and space for developing the water resource carrying capacity and could make further efforts to attract tourists. Moreover, the WECC of the East Lake was mainly affected by rapid social and economic development and water environment damage caused by organic pollutants. From the view of urban

  16. A comparative study of voltage stability indices in a power system

    Energy Technology Data Exchange (ETDEWEB)

    Sinha, A.K. [I.I.T., Kharagpur (India). Dept. of Electrical Engineering; Hazarika, D. [Assam Engineering College (India)

    2000-11-01

    The paper compares the effectiveness of voltage stability indices in providing information about the proximity of voltage instability of a power system. Three simple voltage stability indices are proposed and their effectiveness is compared with some of the recently proposed indices. The comparison is carried out over a wide range of system operating conditions by changing the load power factor and feeder X/R ratios. Test results for the IEEE 57 bus and IEEE 118 bus system are presented. (author)

  17. Studies on dispersive stabilization of porous media flows

    Energy Technology Data Exchange (ETDEWEB)

    Daripa, Prabir, E-mail: prabir.daripa@math.tamu.edu; Gin, Craig [Department of Mathematics, Texas A& M University, College Station, Texas 77843 (United States)

    2016-08-15

    Motivated by a need to improve the performance of chemical enhanced oil recovery (EOR) processes, we investigate dispersive effects on the linear stability of three-layer porous media flow models of EOR for two different types of interfaces: permeable and impermeable interfaces. Results presented are relevant for the design of smarter interfaces in the available parameter space of capillary number, Peclet number, longitudinal and transverse dispersion, and the viscous profile of the middle layer. The stabilization capacity of each of these two interfaces is explored numerically and conditions for complete dispersive stabilization are identified for each of these two types of interfaces. Key results obtained are (i) three-layer porous media flows with permeable interfaces can be almost completely stabilized by diffusion if the optimal viscous profile is chosen, (ii) flows with impermeable interfaces can also be almost completely stabilized for short time, but become more unstable at later times because diffusion flattens out the basic viscous profile, (iii) diffusion stabilizes short waves more than long waves which leads to a “turning point” Peclet number at which short and long waves have the same growth rate, and (iv) mechanical dispersion further stabilizes flows with permeable interfaces but in some cases has a destabilizing effect for flows with impermeable interfaces, which is a surprising result. These results are then used to give a comparison of the two types of interfaces. It is found that for most values of the flow parameters, permeable interfaces suppress flow instability more than impermeable interfaces.

  18. Surgical stabilization of internal pneumatic stabilization? A prospective randomized study of management of severe flail chest patients.

    Science.gov (United States)

    Tanaka, Hideharu; Yukioka, Tetsuo; Yamaguti, Yoshihiro; Shimizu, Syoichiro; Goto, Hideaki; Matsuda, Hiroharu; Shimazaki, Syuji

    2002-04-01

    We compared the clinical efficacy of surgical stabilization and internal pneumatic stabilization in severe flail chest patients who required prolonged ventilatory support. Thirty-seven consecutive severe flail chest patients who required mechanical ventilation were enrolled in this study. All the patients received identical respiratory management, including end-tracheal intubation, mechanical ventilation, continuous epidural anesthesia, analgesia, bronchoscopic aspiration, postural drainage, and pulmonary hygiene. At 5 days after injury, surgical stabilization with Judet struts (S group, n = 18) or internal pneumatic stabilization (I group, n = 19) was randomly assigned. Most respiratory management was identical between the two groups except the surgical procedure. Statistical analysis using two-way analysis of variance and Tukey's test was used to compare the groups. Age, sex, Injury Severity Score, chest Abbreviated Injury Score, number of rib fractures, severity of lung contusion, and Pao2/Fio2 ratio at admission were all equivalent in the two groups. The S group showed a shorter ventilatory period (10.8 +/- 3.4 days) than the I group (18.3 +/- 7.4 days) (p < 0.05), shorter intensive care unit stay (S group, 16.5 +/- 7.4 days; I group, 26.8 +/- 13.2 days; p < 0.05), and lower incidence of pneumonia (S group, 24%; I group, 77%; p < 0.05). Percent forced vital capacity was higher in the S group at 1 month and thereafter (p < 0.05). The percentage of patients who had returned to full-time employment at 6 months was significantly higher in the S group (11 of 18) than in the I group (1 of 19). This study proved that in severe flail chest patients, surgical stabilization using Judet struts has beneficial effects with respect to less ventilatory support, lower incidence of pneumonia, shorter trauma intensive care unit stay, and reduced medical cost than internal fixation. Moreover, surgical stabilization with Judet struts improved percent forced vital capacity from the

  19. Tokamak power systems studies, FY 1986: A second stability power reactor

    International Nuclear Information System (INIS)

    Ehst, D.; Baker, C.; Billone, M.

    1987-03-01

    This report presents the results of the work at Argonne National Laboratory (ANL) during FY-1986 on the Tokamak Power Systems Study (TPSS). The purpose of the TPSS is to explore and develop ideas that would lead to improvements in the tokamak as a power reactor concept. The work at ANL concentrated on plasma engineering, impurity control, and the blanket/first wall/shield system. The work in FY-1986 extended these studies and focused them on a reference design point. The key features of the design point include: second stability regime with higher β and larger aspect ratio, steady-state operation with fast wave current drive, impurity control via a self-pumped slot limiter, a self-cooled liquid lithium, vanadium alloy blanket with simplified poloidal flow, and reduced reactor building volume with vertical lift maintenance. Sufficient work was carried out to report a preliminary cost estimate. In addition, reactor implications of steady-state operation in the first stability regime were also studied. 174 refs., 124 figs., 65 tabs

  20. Efficacy and Stability studies of microbial folate fortified fruit juices prepared using probiotic microorganism.

    Science.gov (United States)

    Deep, S; Ojha, S; Kundu, S

    2017-07-31

    Folate, natural form of water soluble vitamin folic acid, is significant for humans as involved in most important metabolic reactions i.e. nucleotide synthesis and amino acid inter conversions. Thus its deficiency causes neural tube defects in newborns and cardiovascular diseases, and cancers. Humans cannot synthesize folate de novo so consumption through diet is essential. Natural food sources, supplements and fortified food products are the choices available to complete the Daily recommended intake. However microbial fortification using probiotics recently gained wide attention due to dual advantage of natural food matrix with enhanced folate content along with the probiotics benefits. Current study was focused on the microbial fortification of fruit juices and their efficacy and stability studies. Freshly filtered orange and tomato juice was prepared and inoculated with Streptococcus thermophilus NCIM 2904. Incubation was done at 40°C and samples were collected at different time interval. Folate extraction was done using human plasma and content was measured by microbiological assay using Lactobacillus casei NCIM No. 2364. Efficacy and stability studies were carried out to ensure the quality of juices to be consumed in terms of folate content, viable cell count and pH after 4 weeks of storage at low temperature. Positive results were observed as folate content was quite stable whereas viable cell count was also found to be significant till some time without adding any preservatives. The results indicated that fortified fruit juices could be used as probiotic beverages with enhanced folate content.

  1. Study of the stability of the tragacanto rubber irradiated

    International Nuclear Information System (INIS)

    Rodriguez, M.; Romero, M.; Montes de Oca, N.

    2001-01-01

    Presently work was studied the processing by radiations of the tragacanto rubber powdered, with ends of achieving its sterilization. For the irradiation, the envelopes were placed in aluminum containers to reason of an envelope for container. The material underwent analysis of its viscosity and microbiological tests. They got ready solutions, according to the British pharmacopoeia, starting from the material irradiated with dose of D0-0, D1-5, D2-7.5, and D3-10 kGy. The smaller than the applied doses (5kGy) it produced a variation of 72% in the viscosity of the solutions, in comparison with the rubber without irradiating. They were carried out tests of sterility to the material irradiated with inferior dose of 5 kGy, being contaminated in all the cases

  2. Electron beam assisted synthesis of silver nanoparticle in chitosan stabilizer: Preparation, stability and inhibition of building fungi studies

    Science.gov (United States)

    Jannoo, Kanokwan; Teerapatsakul, Churapa; Punyanut, Adisak; Pasanphan, Wanvimol

    2015-07-01

    Silver nanoparticles (AgNPs) in chitosan (CS) stabilizer were successfully synthesized using electron beam irradiation. The effects of irradiation dose, molecular weight (MW) of CS stabilizer, concentration of AgNO3 precursor and addition of tert-butanol on AgNPs production were studied. The stability of the AgNPs under different temperatures and storage times were also investigated. The AgNPs formation in CS was observed using UV-vis, FT-IR and XRD. The characteristic surface plasmon resonance (SPR) of the obtained AgNPs was around 418 nm. The CS stabilizer and its MW, AgNO3 precursor and irradiation doses are important parameters for the synthesis of AgNPs. The optimum addition of 20% v/v tert-butanol could assist the formation of AgNPs. The AgNPs in CS stabilizer were stable over a period of one year when the samples were kept at 5 °C. The AgNPs observed from TEM images were spherical with an average particle size in the range of 5-20 nm depending on the irradiation doses. The AgNPs in CS solution effectively inhibited the growth of several fungi, i.e., Curvularia lunata, Trichoderma sp., Penicillium sp. and Aspergillus niger, which commonly found on the building surface.

  3. Study methods for borings carried out near the underground nuclear experiments in the Sahara. Part 2. techniques for studying the walls of the bore-holes

    International Nuclear Information System (INIS)

    Faure, J.

    1969-01-01

    Measurements by drilling have been carried out during the underground nuclear bomb explosions on the Sahara test site: observation of the rock by television and permeability measurements. After a presentation of the principle of the experiment, a description is given of the technique used, i.l. the equipment and its manipulation. Finally problems arising from the interpretation of the results are considered. The conclusion stresses the importance of the results of this work from the point of view of possible industrial applications. (author) [fr

  4. A pilot study on the stability of toluene in blood from workers

    Directory of Open Access Journals (Sweden)

    Ogawa Masanori

    2012-12-01

    Full Text Available Abstract Background Biological monitoring is used to assess toluene exposure in medical examinations. The American Conference of Industrial Hygienists, Japanese Society for Occupational Health and Deutsche Forschungsgemeinschaft have proposed various biological exposure determinants, such as toluene in blood and urine, and o-cresol in urine. Toluene in blood is a common biomarker among them. Toluene is a volatile organic solvent; therefore, sample preservation under appropriate conditions before measurement is necessary. However, little study has been done on the stability of toluene in workers’ blood samples under conditions simulating those of a medical examination. Finding We carried out a pilot study on the stability of toluene in blood from humans, according to different methods of sample preservation. Toluene in blood was analyzed by head space-gas chromatography/mass spectrometry. The sealing performance of the vial was examined by using toluene-added blood and the stability of toluene in blood according to the preservation period was examined by using blood from toluene-handling workers, which was collected with vacuum blood tubes. The sealing performance of the headspace vial used in this study was good for three days and toluene in blood in tubes from workers was stable at least within 8 hours up to blood packing at 4°C. Conclusion We could propose that the collected blood need only be transferred into headspace vials on the collection day and analyzed within a few days, if the samples are preserved at 4°C. Our data size is limited; however, it may be considered basic information for biological monitoring in medical examinations.

  5. Study plan for research on long-term stability of geological environments in FY2009

    International Nuclear Information System (INIS)

    Yasue, Ken-ichi; Hanamuro, Takahiro; Kokubu, Yoko; Ishimaru, Tsuneari; Umeda, Koji

    2009-09-01

    The Japanese islands lie in a region of the Circum-Pacific orogenic belt characterized by active tectonics such as volcanism and earthquakes. The concept of geological disposal of HLW in Japan is based on a multi-barrier system which consists of the engineered barrier in the stable geological environments and the natural barrier. The natural phenomena which potentially affect the geological environments in tectonically active Japan are volcanism, faulting, uplift, denudation, climatic change, and sea-level change. Investigation technologies to evaluate their long-term stability of the geological environments have been developed. In fiscal year 2009, we continue researches to develop technologies for detecting latent geotectonic events in preliminary investigation. With regard to modelling technology, we plan to develop prediction models for evaluating the changes of geological environment (e.g., thermal, hydraulic, mechanical, and geochemical conditions) for long term. In addition to these, the development of dating techniques prerequisite for these studies is also carried out. (author)

  6. [Experimental study on carbon fiber reinforced plastic plate--analysis of stabilizing force required for plate].

    Science.gov (United States)

    Iizuka, H

    1990-11-01

    Plates currently in use for the management of bone fracture made of metal present with various problems. We manufactured carbon fiber reinforced plastic (CFRP) plates from Pyrofil T/530 puriplegs overlaid at cross angles of +/- 10 degrees, +/- 20 degrees, and +/- 30 degrees for trial and carried out an experimental study on rabbit tibiofibular bones using 316L stainless steel plates of comparable shape and size as controls. The results indicate the influence of CFRP plate upon cortical bone was milder than that of stainless steel plate, with an adequate stabilizing force for the repair of fractured rabbit tibiofibular bones. CFRP has the advantages over metals of being virtually free from corrosion and fatigue, reasonably radiolucent and able to meet a wide range of mechanical requirements. This would make CFRP plate quite promising as a new devices of treating fracture of bones.

  7. Stability and performance studies of the PITZ photoelectron gun

    International Nuclear Information System (INIS)

    Isaev, Igor

    2018-02-01

    The invention of free electron lasers (FELs) opened new opportunities for the investigation of natural phenomena. However, the operation of a FEL requires high energy, high peak current electron beams with very small transverse emittance which causes extreme requirements for the corresponding electron sources. Besides the high beam quality, the electron sources must have very high operational stability and reliability. One of the electron source types which satisfy FEL requirements is a photoelectron gun. Photoelectron guns combine photoemissive electron generation and direct acceleration in a Radio Frequency (RF) cavity. The Photo Injector Test facility at DESY, Zeuthen site (PITZ), was established as a test stand of the electron source for FELs like FLASH and the European XFEL in Hamburg. The studies of the beam emittance at PITZ showed that the gun is able to produce electron beams with emittance even smaller than it is required by XFEL specifications. But the experiments on the emittance revealed discrepancies between expected gun behavior and observation, such as the difference in optimal parameters for the smallest emittance value, asymmetry of the transverse beam profile and the phase spaces. The work performed at PITZ includes preparation of several RF guns for their subsequent operation at FLASH and the European XFEL. RF conditioning of a gun cavity is one of the major steps of the preparation of a high brightness electron source required for modern FELs. A thorough procedure is applied to increase the peak and average RF power in the gun cavity, including an increase of the repetition rate and RF pulse length combined with a gun solenoid current sweep. The main goals of this thesis are: (1) an attempt of deep understanding of physical processes taking place during operation of a photoelectron gun (conditioning process, parameters adjustments); (2) definition of operational problems sources and explanation of the experimentally obtained results in the gun

  8. VARIATIONS OF THE ENERGY METHOD FOR STUDYING CONSTRUCTION STABILITY

    Directory of Open Access Journals (Sweden)

    A. M. Dibirgadzhiev

    2017-01-01

    Full Text Available Objectives. The aim of the work is to find the most rational form of expression of the potential energy of a nonlinear system with the subsequent use of algebraic means and geometric images of catastrophe theory for studying the behaviour of a construction under load. Various forms of stability criteria for the equilibrium states of constructions are investigated. Some aspects of the using various forms of expression of the system’s total energy are considered, oriented to the subsequent use of the catastrophe theory methods for solving the nonlinear problems of construction calculation associated with discontinuous phenomena.Methods. According to the form of the potential energy expression, the mathematical description of the problem being solved is linked to a specific catastrophe of a universal character from the list of catastrophes. After this, the behaviour of the system can be predicted on the basis of the fundamental propositions formulated in catastrophe theory without integrating the corresponding system of nonlinear differential equations of high order in partial derivatives, to which the solution of such problems is reduced.Results. The result is presented in the form of uniform geometric images containing all the necessary qualitative and quantitative information about the deformation of whole construction classes under load for a wide range of changes in the values of external (control and internal (behavioural parameters.Conclusion. Methods based on catastrophe theory are an effective mathematical tool for solving non-linear boundary-value problems with parameters associated with discontinuous phenomena, which are poorly analysable by conventional methods. However, they have not yet received due attention from researchers, especially in the field of stability calculations, which remains a complex, relevant and attractive problem within structural mechanics. To solve a concrete nonlinear boundary value problem for calculating

  9. Computational Study of Hypersonic Boundary Layer Stability on Cones

    Science.gov (United States)

    Gronvall, Joel Edwin

    Due to the complex nature of boundary layer laminar-turbulent transition in hypersonic flows and the resultant effect on the design of re-entry vehicles, there remains considerable interest in developing a deeper understanding of the underlying physics. To that end, the use of experimental observations and computational analysis in a complementary manner will provide the greatest insights. It is the intent of this work to provide such an analysis for two ongoing experimental investigations. The first focuses on the hypersonic boundary layer transition experiments for a slender cone that are being conducted at JAXA's free-piston shock tunnel HIEST facility. Of particular interest are the measurements of disturbance frequencies associated with transition at high enthalpies. The computational analysis provided for these cases included two-dimensional CFD mean flow solutions for use in boundary layer stability analyses. The disturbances in the boundary layer were calculated using the linear parabolized stability equations. Estimates for transition locations, comparisons of measured disturbance frequencies and computed frequencies, and a determination of the type of disturbances present were made. It was found that for the cases where the disturbances were measured at locations where the flow was still laminar but nearly transitional, that the highly amplified disturbances showed reasonable agreement with the computations. Additionally, an investigation of the effects of finite-rate chemistry and vibrational excitation on flows over cones was conducted for a set of theoretical operational conditions at the HIEST facility. The second study focuses on transition in three-dimensional hypersonic boundary layers, and for this the cone at angle of attack experiments being conducted at the Boeing/AFOSR Mach-6 quiet tunnel at Purdue University were examined. Specifically, the effect of surface roughness on the development of the stationary crossflow instability are investigated

  10. Stability and performance studies of the PITZ photoelectron gun

    Energy Technology Data Exchange (ETDEWEB)

    Isaev, Igor

    2018-02-15

    The invention of free electron lasers (FELs) opened new opportunities for the investigation of natural phenomena. However, the operation of a FEL requires high energy, high peak current electron beams with very small transverse emittance which causes extreme requirements for the corresponding electron sources. Besides the high beam quality, the electron sources must have very high operational stability and reliability. One of the electron source types which satisfy FEL requirements is a photoelectron gun. Photoelectron guns combine photoemissive electron generation and direct acceleration in a Radio Frequency (RF) cavity. The Photo Injector Test facility at DESY, Zeuthen site (PITZ), was established as a test stand of the electron source for FELs like FLASH and the European XFEL in Hamburg. The studies of the beam emittance at PITZ showed that the gun is able to produce electron beams with emittance even smaller than it is required by XFEL specifications. But the experiments on the emittance revealed discrepancies between expected gun behavior and observation, such as the difference in optimal parameters for the smallest emittance value, asymmetry of the transverse beam profile and the phase spaces. The work performed at PITZ includes preparation of several RF guns for their subsequent operation at FLASH and the European XFEL. RF conditioning of a gun cavity is one of the major steps of the preparation of a high brightness electron source required for modern FELs. A thorough procedure is applied to increase the peak and average RF power in the gun cavity, including an increase of the repetition rate and RF pulse length combined with a gun solenoid current sweep. The main goals of this thesis are: (1) an attempt of deep understanding of physical processes taking place during operation of a photoelectron gun (conditioning process, parameters adjustments); (2) definition of operational problems sources and explanation of the experimentally obtained results in the gun

  11. Chemical and physical stability of smectites and illite in electrolyte solutions: experimental study at 150 C

    International Nuclear Information System (INIS)

    Boutiche, M.

    1995-01-01

    Chemical interactions between electrolytic solutions commonly used i drilling muds and clays have been studies under P-T conditions similar to those of drillings (150 deg C) in order to determine the eventual consequences on the stability of clay rich formations. The experimental work has been carried out using several solutions (water, NaOH (pH 8, 10, 12), KCI (0,1, 1 2 mol./l), sea water, and K 2 CO 3 ) and clay minerals with low to high amounts of swelling layers (smectite (Na, Na-Ca, Ca), mixed layered illite-smectite minerals). Run products are studied by X-ray diffraction and electronic microprobe. Smectite layers show series of mineralogical changes (cation exchange in the interlayer site, formation of non-swelling layers, hydrolysis), which, however, do not yield to the formation of new minerals, except in the case of the interaction with K 2 CO 3 at 150 deg C (zeolite crystallisation). Cation exchange in the interlayer depends on the nature of the cation, cation concentration in the solution, exchange constants, and liquid/solid ratio. In dilute solutions ( 1 mol./l), because they favour the collapse of swelling layers, and dispersion. Solutions of K 2 CO 3 at 150 deg C are at the origin of the transformation of smectite to zeolites, and high pH - highly saline solutions are rather aggressive, and would probably not stabilize the argilites. (author)

  12. A Study on the Stability of Diluted Bee Venom Solution

    Directory of Open Access Journals (Sweden)

    Mi-Suk Kang

    2003-06-01

    Full Text Available Objective : The purpose of this study was to investigate the stability of bee venom according to the keeping method and period. Method : The author observed microbial contamination of bee venom in nutrient agar, broth, YPD agar and YPD media and antibacterial activity for S. aureus, E. coli manufactured 12, 6 and 3 months ago as the two type of room temperature and 4℃ cold storage. Result : 1. 1:3,000 and 1:4,000 diluted bee venom solution did not show microbial contamination both room temperature and cold storage within twelve months. 2. There was antibacterial activity of diluted bee venom for S. aureus in cold storage within twelve months and there was no antibacterial activity of diluted bee venom for S. aureus in twelve months, room temperature storage. 3. We could not observe the zone of inhibition around paper disc of all for E.coli. in 1:3,000, 1:30,000 and 1:3,000,000 diluted bee venom solution, respectively. According to results, we expect that diluted bee venom solution is stable both cold and room temperature storage within twelve months.

  13. Experimental studies of Alfven modes stability on the JET tokamak

    International Nuclear Information System (INIS)

    Testa, D.; Fasoli, A.; Borba, D.N.

    2002-01-01

    The linear stability properties of Alfven modes are studied on JET using an active excitation technique. The Saddle Coils drive low amplitude, vertical bar δB/B vertical bar ∼ 10 -6 , stable plasma modes with toroidal mode number n=0 / 2. The diagnostic technique uses repetitive sweeps of the driving frequency in a pre-defined range, controlled in real-time. The plasma response is extracted from background noise using synchronous detection, and is used to identify in real-time the resonance corresponding to a global mode. When a resonance is found, the real-time controller locks to that frequency and tracks the mode. This provides a direct evaluation of the mode damping rate, γ/ω from the width of the frequency sweep. Two systems are used to measure fast fluctuation data. The KC1F system is a 8-channel, 1MHz/4s continuous digitizer used to analyze magnetic and reflectometry data in the frequency range 5≤f(kHz) ≤500. This system is particularly suitable to follow the time evolution of the instability. The CATS system collects and digitizes a large number of channels generally using short time snapshots. This system is useful to determine the position of the instability using the cross-correlation between the magnetic and other radially localized measurements, such as soft X-rays, reflectometry or electron cyclotron emission

  14. Environmental stability study of holographic solar spectrum splitting materials

    Science.gov (United States)

    Chrysler, Benjamin D.; Ayala Pelaez, Silvana; Wu, Yuechen; Vorndran, Shelby D.; Kostuk, Raymond K.

    2016-09-01

    In this study the impact of outdoor temperature variations and solar illumination exposure on spectral filter material and holographic optical elements is examined. Although holographic components have been shown to be useful for solar spectrum splitting designs, relatively little quantitative data exist to demonstrate the extent to which these materials can withstand outdoor conditions. As researchers seek to investigate practical spectrum splitting designs, the environmental stability of holographic materials should be considered as an important factor. In the experiment presented, two holographic materials, Covestro Bayfol HX photopolymer and dichromated gelatin, and 3M reflective polymer filter materials are exposed to outdoor conditions for a period of several months. The environmental effect on absorption, spectral and angular bandwidth, peak efficiency, and Bragg matching conditions for the holograms are examined. Spectral bandwidth and transmittance of the 3M reflective filter material are also monitored. Holographic gratings are recorded, measured, and mounted on glass substrates and then sealed with a glass cover plate. The test samples are then mounted on a photovoltaic panel to simulate realistic temperature conditions and placed at an outdoor test facility in Tucson, Arizona. A duplicate set of holograms and 3M filter material is stored as a control group and periodically compared over the test period.

  15. A neutron scattering study on the stability of trehalose mycolates under thermal stress

    Energy Technology Data Exchange (ETDEWEB)

    Migliardo, F., E-mail: fmigliardo@unime.it [Department of Physics, University of Messina, Viale D’Alcontres 31, 98166 Messina (Italy); Salmeron, C.; Bayan, N. [Laboratoire de Microbiologie Moléculaire et Cellulaire, IBBMC, Bat 430, Université de Paris Sud XI, 15 rue Georges Clémenceau, 91405 Orsay Cedex (France)

    2013-10-16

    Highlights: ► Neutron scattering measurements have been performed on mycolate water mixtures. ► A comparison with lecithin lipid water mixtures has been carried out. ► Mycolates show a lower mobility and flexibility compared to lecithin. ► The observed peculiarities of mycolic acids could be ascribed to trehalose. ► The results could justify the high resistance to thermal stress of mycobacteria. - Abstract: The present paper is focused on the study of the dynamics of mycolic acids, which are fundamental components of the outer membrane (mycomembrane) of Mycobacterium tuberculosis. An elastic neutron scattering study of mycolic acid/H{sub 2}O and lecithin/H{sub 2}O mixtures as a function of temperature and exchanged wavevector Q has been carried out. This study provides an effective way for characterizing the dynamical properties, furnishing a set of parameters characterizing the different flexibility and rigidity of the investigated lipids. The behavior of the elastically scattered intensity profiles and the derived mean square displacements as a function of temperature shows a more marked temperature dependence for lecithin lipids in comparison with mycolic acids, so revealing a higher thermal stability of these latter. These findings could be useful for understanding the dynamics-function relation in the mycomembrane and then to relate it to the low permeability and high resistance of mycobacteria to many antibiotics.

  16. A neutron scattering study on the stability of trehalose mycolates under thermal stress

    International Nuclear Information System (INIS)

    Migliardo, F.; Salmeron, C.; Bayan, N.

    2013-01-01

    Highlights: ► Neutron scattering measurements have been performed on mycolate water mixtures. ► A comparison with lecithin lipid water mixtures has been carried out. ► Mycolates show a lower mobility and flexibility compared to lecithin. ► The observed peculiarities of mycolic acids could be ascribed to trehalose. ► The results could justify the high resistance to thermal stress of mycobacteria. - Abstract: The present paper is focused on the study of the dynamics of mycolic acids, which are fundamental components of the outer membrane (mycomembrane) of Mycobacterium tuberculosis. An elastic neutron scattering study of mycolic acid/H 2 O and lecithin/H 2 O mixtures as a function of temperature and exchanged wavevector Q has been carried out. This study provides an effective way for characterizing the dynamical properties, furnishing a set of parameters characterizing the different flexibility and rigidity of the investigated lipids. The behavior of the elastically scattered intensity profiles and the derived mean square displacements as a function of temperature shows a more marked temperature dependence for lecithin lipids in comparison with mycolic acids, so revealing a higher thermal stability of these latter. These findings could be useful for understanding the dynamics-function relation in the mycomembrane and then to relate it to the low permeability and high resistance of mycobacteria to many antibiotics

  17. Study on quantitative evaluation of environmental carrying capacity of eco-tourism%生态旅游环境承载力评价研究

    Institute of Scientific and Technical Information of China (English)

    孙金梅; 林建

    2012-01-01

    近年来生态旅游迅猛发展,成为国内外旅游的热点,但生态旅游环境压力加大,如何评价环境压力就成了不容忽视的问题。在系统分析法基础上,提出生态旅游环境承载力概念,建立一套包括经济和社会承载力等5个子系统的科学生态旅游环境承载力指标体系及评价模型,并以武夷山自然保护区为例进行实证研究,研究结果表明其环境承载力远远超过实际游客数量,需要采取加强生态监测和科学功能分区等措施。%In recent years,ecological tourism becomes the domestic and foreign tourist hot spot,but the pressure of ecological tourism environment is increased. How to evaluate the environmental stress becomes a problem that cannot ignored. Combined with the former research,based on the system analysis method, the concepts of the ecological carrying capacity of tourism environment is proposed,a set of scientific ecological carrying capacity of tourism environment index system and evaluation model are established, including five sub-systems of economic and social capacity,and taking the nature protection area of Wuyishan as a case study, the results shows that the environmental carrying capacity force is far more than the actual number of tourists. It is needed to take the measures of strengthening the ecological monitoring and scientific zoning.

  18. A Panel of Recombinant Mucins Carrying a Repertoire of Sialylated O-Glycans Based on Different Core Chains for Studies of Glycan Binding Proteins

    Directory of Open Access Journals (Sweden)

    Reeja Maria Cherian

    2015-08-01

    Full Text Available Sialylated glycans serve as key elements of receptors for many viruses, bacteria, and bacterial toxins. The microbial recognition and their binding specificity can be affected by the linkage of the terminal sugar residue, types of underlying sugar chains, and the nature of the entire glycoconjugate. Owing to the pathobiological significance of sialylated glycans, we have engineered Chinese hamster ovary (CHO cells to secrete mucin-type immunoglobulin-fused proteins carrying terminal α2,3- or α2,6-linked sialic acid on defined O-glycan core saccharide chains. Besides stably expressing P-selectin glycoprotein ligand-1/mouse immunoglobulin G2b cDNA (PSGL-1/mIgG2b, CHO cells were stably transfected with plasmids encoding glycosyltransferases to synthesize core 2 (GCNT1, core 3 (B3GNT6, core 4 (GCNT1 and B3GNT6, or extended core 1 (B3GNT3 chains with or without the type 1 chain-encoding enzyme B3GALT5 and ST6GAL1. Western blot and liquid chromatography-mass spectrometry analysis confirmed the presence of core 1, 2, 3, 4, and extended core 1 chains carrying either type 1 (Galb3GlcNAc or type 2 (Galb4GlcNAc outer chains with or without α2,6-linked sialic acids. This panel of recombinant mucins carrying a repertoire of sialylated O-glycans will be important tools in studies aiming at determining the fine O-glycan binding specificity of sialic acid-specific microbial adhesins and mammalian lectins.

  19. Core indicators evaluation of effectiveness of HIV-AIDS preventive-control programmes carried out by nongovernmental organizations. A mixed method study

    Directory of Open Access Journals (Sweden)

    Mansilla Rosa

    2011-07-01

    Full Text Available Abstract Background The number of nongovernmental organizations working on AIDS has grown. There is great diversity in the type of activities and population groups that have been targeted. The purposes of this study are: to describe and analyze the objectives and HIV-AIDS preventive activities that are carried out by the AIDS-NGOs that work with AIDS in Catalonia and that receive subsidies from the Department of Health; and to develop a comprehensive proposal for measurable and agreed upon core quality evaluation indicators to monitor and assess those objectives and activities that can have an impact on the fight against inequalities and stigmatization, and incorporate the perspectives of the service providers and users. Methods A mixed method study has been carried out with professionals from the 36 NGOs that work with HIV/AIDS in Catalonia, as well as their users. This study achieved the completeness model using the following phases: 1. A systematic review of AIDS-NGOs annual reports and preparation of a catalogue of activities grouped by objectives, level of prevention and AIDS-NGOs target population; 2. A transversal study through an ad-hoc questionnaire administered to the AIDS-NGOs representatives; 3. A qualitative study with a phenomenological approach through focus groups, individual interviews and observations; 4. Consensus meetings between AIDS-NGOs professionals and the research team using Haddon matrices in order to establish a proposal of evaluation indicators. Results The information was classified according to level of prevention and level of intervention. A total of 248 objectives and 258 prevention activities were identified. 1564 evaluation indicators, addressed to 7 target population groups, were produced. Thirty core activities were selected. The evaluation indicators proposed for these activities were: 76 indicators for 15 primary prevention activities, 43 for 5 secondary prevention activities and 68 for 10 tertiary

  20. Core indicators evaluation of effectiveness of HIV-AIDS preventive-control programmes carried out by nongovernmental organizations. A mixed method study.

    Science.gov (United States)

    Berenguera, Anna; Pujol-Ribera, Enriqueta; Violan, Concepció; Romaguera, Amparo; Mansilla, Rosa; Giménez, Albert; Ascaso, Carlos; Almeda, Jesús

    2011-07-28

    The number of nongovernmental organizations working on AIDS has grown. There is great diversity in the type of activities and population groups that have been targeted. The purposes of this study are: to describe and analyze the objectives and HIV-AIDS preventive activities that are carried out by the AIDS-NGOs that work with AIDS in Catalonia and that receive subsidies from the Department of Health; and to develop a comprehensive proposal for measurable and agreed upon core quality evaluation indicators to monitor and assess those objectives and activities that can have an impact on the fight against inequalities and stigmatization, and incorporate the perspectives of the service providers and users. A mixed method study has been carried out with professionals from the 36 NGOs that work with HIV/AIDS in Catalonia, as well as their users. This study achieved the completeness model using the following phases:1. A systematic review of AIDS-NGOs annual reports and preparation of a catalogue of activities grouped by objectives, level of prevention and AIDS-NGOs target population; 2. A transversal study through an ad-hoc questionnaire administered to the AIDS-NGOs representatives; 3. A qualitative study with a phenomenological approach through focus groups, individual interviews and observations; 4. Consensus meetings between AIDS-NGOs professionals and the research team using Haddon matrices in order to establish a proposal of evaluation indicators. The information was classified according to level of prevention and level of intervention. A total of 248 objectives and 258 prevention activities were identified. 1564 evaluation indicators, addressed to 7 target population groups, were produced. Thirty core activities were selected. The evaluation indicators proposed for these activities were: 76 indicators for 15 primary prevention activities, 43 for 5 secondary prevention activities and 68 for 10 tertiary prevention activities. The results could help to homogeneously

  1. Thermo-hydraulic stability study of a steam generator

    International Nuclear Information System (INIS)

    Magni, M C; Marcel, C P; Delmastro, D F

    2012-01-01

    In this work a mathematical model developed to investigate the thermalhydraulic stability of a helically coiled steam generator is presented. Such a steam generator is prone to experiment density wave oscillations. The model is therefore used to analyze the stability of the CAREM-25 reactor steam generators. The model is linear, numerically non-diffusive and nodal. In addition, it is able to represent non-uniform heat transfer fluxes between the primary and secondary coolant circuits. By using this model the marginal stability condition is found by varying the inlet friction coefficient for different conditions. The results are then compared with those obtained with a different model for which a simple uniform heat flux profiled is assumed. It is found that with such simplification the density waves instability mechanism is overestimated in a wide range of operating powers. For very low powers, in the contrary, the so-called uniform model underestimates the stabilizing inlet friction and therefore it gives non-conservative results. With the use of the more realistic non-uniform power profile model, it was possible to determine that, for a CAREM-25 steam generator, the most stable conditions is found at 60MW when the reactor operates at nominal pressure. Moreover, it is found that at high power levels the stability performance is dominated by the two-phase friction component while at low power levels the friction component originated in the over heated steam region prevail (author)

  2. Studies on solid-state physics carried out with the Saclay reactor (1962); Etudes de physique du solide realisees a la pile de Saclay (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Herpin, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    This paper deals only with solid-state physics experiments carried out on outgoing beams: rather than giving a general review of the work performed, if refers to only a few of the most important studies or those nearest completion. These are being made with the experimental beams of the two Saclay reactors EL-2, with a central flux of 10{sup 13} n/cm{sup 2}, and - since 1958 - EL-3, whose central flux is equal ta 10{sup 14} n/cm{sup 2}. The experiments are being carried out by two separate groups of physicists, employing different techniques, namely neutron diffraction using a crystal spectrometer, and inelastic scattering using a time-of-flight spectrometer. (author) [French] Cet expose ne relate que des experiences de physique du solide faites sur des faisceaux sortis; plutot que de donner une revue de l'ensemble des travaux effectues, on ne cite que quelques etudes que l'on peut considerer comme plus essentielles ou mieux achevees. On utilise les faisceaux experimentaux des deux piles de Saclay, EL-2 dont le flux au centre est de 10{sup 13}n/cm{sup 2} et, depuis 1958, EL-3 pour laquelle il est egal a 10{sup 14} n/cm{sup 2}. Les experiences sont realisees par deux groupes de physiciens distincts, employant des techniques differentes, la diffraction des neutrons qui utilise un spectrometre a cristal, et la diffusion inelastique avec un spectrometre a temps de vol. (auteur)

  3. A valuation study of fuel supply stability of nuclear energy

    International Nuclear Information System (INIS)

    Nagano, Koji; Nagata, Yutaka; Hitomi, Kazumi; Hamagata, Sumio; Asaoka, Yoshiyuki

    2008-01-01

    In order to assess potential benefits of nuclear power with regard to its characteristics of fuel supply stability, the following three aspects are valuated under the Japanese energy and electricity mix: a) economic stability; i.e. nuclear power's contribution to the whole energy and electricity mix in terms of resistance to fluctuation and/or fuel price hikes, b) procurement stability; i.e. natural uranium, the raw fuel material for nuclear power generation, is being imported from more reliable sources through adequately diverse markets than in the cases of oil and natural gas, and, c) passive reserve effect; i.e. fuel materials as running stocks at power stations and fuel service facilities could maintain nuclear power generation running for a certain duration under unexpected disruption of fuel supply. (author)

  4. Time resolved studies of H{sub 2}{sup +} dissociation with phase-stabilized laser pulses

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Bettina

    2010-06-23

    In the course of this thesis, experimental studies on the dissociation of H{sub 2}{sup +}(H{sub 2}{sup +}{yields}p+H) in ultrashort laser pulses with a stabilized carrier-envelope phase (CEP) were carried out. In single-pulse measurements, the ability to control the emission direction of low energetic protons, i.e. the localization of the bound electron at one of the nuclei after dissociation, by the CEP was demonstrated. The coincident detection of the emitted protons and electrons and the measurement of their three-dimensional momentum vectors with a reaction microscope allowed to clarify the localization mechanism. Further control was achieved by a pump-control scheme with two timedelayed CEP-stabilized laser pulses. Here the neutral H{sub 2} molecule was ionized in the first pulse and dissociation was induced by the second pulse. Electron localization was shown to depend on the properties of the bound nuclear wave packet in H{sub 2}{sup +} at the time the control pulse is applied, demonstrating the ability to use the shape and dynamics of the nuclear wave packet as control parameters. Wave packet simulations were performed reproducing qualitatively the experimental results of the single and the two-pulse measurements. For both control schemes, intuitive models are presented, which qualitatively explain the main features of the obtained results. (orig.)

  5. Thermal stability studies on atomically clean and sulphur passivated InGaAs surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Chauhan, Lalit; Hughes, Greg [School of Physical Sciences, Dublin City University, Glasnevin, Dublin 9 (Ireland)

    2013-03-15

    High resolution synchrotron radiation core level photoemission measurements have been used to study the high temperature stability of sulphur passivated InGaAs surfaces and comparisons made with atomically clean surfaces subjected to the same annealing temperatures. Sulphur passivation of clean InGaAs surfaces prepared by the thermal removal of an arsenic capping layer was carried out using an in situ molecular sulphur treatment in ultra high vacuum. The elemental composition of the surfaces of these materials was measured at a series of annealing temperatures up to 530 C. Following a 480 C anneal In:Ga ratio was found to have dropped by 33% on sulphur passivated surface indicating a significant loss of indium, while no drop in indium signal was recorded at this temperature on the atomically InGaAs surface. No significant change in the As surface concentration was measured at this temperature. These results reflect the reduced thermal stability of the sulphur passivated InGaAs compared to the atomically clean surface which has implications for device fabrication. (Copyright copyright 2013 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  6. Development and validation of a thin-layer chromatography method for stability studies of naproxen

    International Nuclear Information System (INIS)

    Rodriguez Hernandez, Yaslenis; Suarez Perez, Yania; Garcia Pulpeiro, Oscar; Rodriguez Borges, Tania

    2011-01-01

    The validation of an analytical method was carried out to be applied to the stability studies of the future formulations of naproxen suppositories for infant and adult use. The factors which mostly influenced in the naproxen stability were determined, the major degradation occurred in oxidizing acid medium and by action of light. The possible formation of esters between the free carboxyl group present in naproxen and the glyceryl monoestereate present in the base was identified as one of the degradation paths in the new formulation. The results were satisfactory. A thin-layer chromatography-based method was developed as well as the best chromatographic conditions were selected. GF 254 silica gel plates and ultraviolet developer at 254 nm were employed. Three solvent systems were evaluated of which A made up of glacial acetic: tetrahydrofurane:toluene (3:9:90 v/v/v)allowed adequate resolution between the analyte and the possible degradation products, with detection limit of 1 μg. The use of the suggested method was restricted to the identification of possible degradation products just for qualitative purposes and not as final test. The method proved to be sensitive and selective enough to be applied for the stated objective, according to the validation results

  7. Time resolved studies of H2+ dissociation with phase-stabilized laser pulses

    International Nuclear Information System (INIS)

    Fischer, Bettina

    2010-01-01

    In the course of this thesis, experimental studies on the dissociation of H 2 + (H 2 + →p+H) in ultrashort laser pulses with a stabilized carrier-envelope phase (CEP) were carried out. In single-pulse measurements, the ability to control the emission direction of low energetic protons, i.e. the localization of the bound electron at one of the nuclei after dissociation, by the CEP was demonstrated. The coincident detection of the emitted protons and electrons and the measurement of their three-dimensional momentum vectors with a reaction microscope allowed to clarify the localization mechanism. Further control was achieved by a pump-control scheme with two timedelayed CEP-stabilized laser pulses. Here the neutral H 2 molecule was ionized in the first pulse and dissociation was induced by the second pulse. Electron localization was shown to depend on the properties of the bound nuclear wave packet in H 2 + at the time the control pulse is applied, demonstrating the ability to use the shape and dynamics of the nuclear wave packet as control parameters. Wave packet simulations were performed reproducing qualitatively the experimental results of the single and the two-pulse measurements. For both control schemes, intuitive models are presented, which qualitatively explain the main features of the obtained results. (orig.)

  8. Ultrasonic Studies of Emulsion Stability in the Presence of Magnetic Nanoparticles

    Directory of Open Access Journals (Sweden)

    A. Józefczak

    2015-01-01

    Full Text Available Pickering emulsions are made of solid particle-stabilized droplets suspended in an immiscible continuous liquid phase. A magnetic emulsion can be obtained using magnetic particles. Solid magnetic nanoparticles are adsorbed strongly at the oil-water interface and are able to stabilize emulsions of oil and water. In this work emulsions stabilized by magnetite nanoparticles were obtained using high-energy ultrasound waves and a cavitation mechanism and, next, their stability in time was tested by means of acoustic waves with a low energy, without affecting the structure. An acoustic study showed high stability in time of magnetic emulsions stabilized by magnetite particles. The study also showed a strong influence of an external magnetic field, which can lead to changes of the emulsion properties. It is possible to control Pickering emulsion stability with the help of an external stimulus—a magnetic field.

  9. Development of urbanization in arid and semi arid regions based on the water resource carrying capacity -- a case study of Changji, Xinjiang

    Science.gov (United States)

    Xiao, H.; Zhang, L.; Chai, Z.

    2017-07-01

    The arid and semiarid region in China where have a relatively weak economic foundation, independent development capacity, and the low-level of urbanization. The new urbanization within these regions is facing severe challenges brought by the constraints of resources. In this paper, we selected the Changji Hui Autonomous Prefecture, Xinjiang Uyghur Autonomous Region as study area. We found that agricultural planting structure is the key water consumption index based on the research about the main water demands of domestic, agriculture and industry. Finally, we suggest that more attentions should be paid to the rational utilization of water resources, population carrying capacity, and adjust and upgrade the industrial structure, with the purpose of coordination with the Silk Road Economic Belt.

  10. Studies of iso-alpha-acids : analysis, purification, and stability.

    NARCIS (Netherlands)

    Khatib, Alfi

    2006-01-01

    The female cones of hop (Humulus lupulus L.) are added to beer, providing taste and flavour and contributing to the stability of foam. The main constituents of hop related to these properties are generically known as alpha-acids. During the brewing process, these acids are isomerized, resulting in

  11. Energetics of load carrying in Nepalese porters.

    Science.gov (United States)

    Bastien, Guillaume J; Schepens, Bénédicte; Willems, Patrick A; Heglund, Norman C

    2005-06-17

    Nepalese porters routinely carry head-supported loads equal to 100 to 200% of their body weight (Mb) for many days up and down steep mountain footpaths at high altitudes. Previous studies have shown that African women carry head-supported loads of up to 60% of their Mb far more economically than army recruits carrying equivalent loads in backpacks. Here we show that Nepalese porters carry heavier loads even more economically than African women. Female Nepalese porters, for example, carry on average loads that are 10% of their Mb heavier than the maximum loads carried by the African women, yet do so at a 25% smaller metabolic cost.

  12. Paper Microzone Plates as Analytical Tools for Studying Enzyme Stability: A Case Study on the Stabilization of Horseradish Peroxidase Using Trehalose and SU-8 Epoxy Novolac Resin.

    Science.gov (United States)

    Ganaja, Kirsten A; Chaplan, Cory A; Zhang, Jingyi; Martinez, Nathaniel W; Martinez, Andres W

    2017-05-16

    Paper microzone plates in combination with a noncontact liquid handling robot were demonstrated as tools for studying the stability of enzymes stored on paper. The effect of trehalose and SU-8 epoxy novolac resin (SU-8) on the stability of horseradish peroxidase (HRP) was studied in both a short-term experiment, where the activity of various concentrations of HRP dried on paper were measured after 1 h, and a long-term experiment, where the activity of a single concentration of HRP dried and stored on paper was monitored for 61 days. SU-8 was found to stabilize HRP up to 35 times more than trehalose in the short-term experiment for comparable concentrations of the two reagents, and a 1% SU-8 solution was found to stabilize HRP approximately 2 times more than a 34% trehalose solution in both short- and long-term experiments. The results suggest that SU-8 is a promising candidate for use as an enzyme-stabilizing reagent for paper-based diagnostic devices and that the short-term experiment could be used to quickly evaluate the capacity of various reagents for stabilizing enzymes to identify and characterize new enzyme-stabilizing reagents.

  13. Urine stability studies for novel biomarkers of acute kidney injury.

    Science.gov (United States)

    Parikh, Chirag R; Butrymowicz, Isabel; Yu, Angela; Chinchilli, Vernon M; Park, Meyeon; Hsu, Chi-Yuan; Reeves, W Brian; Devarajan, Prasad; Kimmel, Paul L; Siew, Edward D; Liu, Kathleen D

    2014-04-01

    The study of novel urinary biomarkers of acute kidney injury has expanded exponentially. Effective interpretation of data and meaningful comparisons between studies require awareness of factors that can adversely affect measurement. We examined how variations in short-term storage and processing might affect the measurement of urine biomarkers. Cross-sectional prospective. Hospitalized patients from 2 sites: Yale New Haven Hospital (n=50) and University of California, San Francisco Medical Center (n=36). We tested the impact of 3 urine processing conditions on these biomarkers: (1) centrifugation and storage at 4°C for 48 hours before freezing at -80°C, (2) centrifugation and storage at 25°C for 48 hours before freezing at -80°C, and (3) uncentrifuged samples immediately frozen at -80°C. Urine concentrations of 5 biomarkers: neutrophil gelatinase-associated lipocalin (NGAL), interleukin 18 (IL-18), kidney injury molecule 1 (KIM-1), liver-type fatty acid-binding protein (L-FABP), and cystatin C. We measured urine biomarkers by established enzyme-linked immunosorbent assay methods. Biomarker values were log-transformed, and agreement with a reference standard of immediate centrifugation and storage at -80°C was compared using concordance correlation coefficients (CCCs). Neither storing samples at 4°C for 48 hours nor centrifugation had a significant effect on measured levels, with CCCs higher than 0.9 for all biomarkers tested. For samples stored at 25°C for 48 hours, excellent CCC values (>0.9) also were noted between the test sample and the reference standard for NGAL, cystatin C, L-FABP and KIM-1. However, the CCC for IL-18 between samples stored at 25°C for 48 hours and the reference standard was 0.81 (95% CI, 0.66-0.96). No comparisons to fresh, unfrozen samples; no evaluation of the effect of protease inhibitors. All candidate markers tested using the specified assays showed high stability with both short-term storage at 4°C and without centrifugation

  14. How honey bees carry pollen

    Science.gov (United States)

    Matherne, Marguerite E.; Anyanwu, Gabriel; Leavey, Jennifer K.; Hu, David L.

    2017-11-01

    Honey bees are the tanker of the skies, carrying thirty percent of their weight in pollen per foraging trip using specialized orifices on their body. How do they manage to hang onto those pesky pollen grains? In this experimental study, we investigate the adhesion force of pollen to the honeybee. To affix pollen to themselves, honey bees form a suspension of pollen in nectar, creating a putty-like pollen basket that is skewered by leg hairs. We use tensile tests to show that the viscous force of the pollen basket is more than ten times the honeybee's flight force. This work may provide inspiration for the design of robotic flying pollinators.

  15. MHD stability studies in the Proto S-1 A/B device

    International Nuclear Information System (INIS)

    Munson, C.; Janos, A.; Newhouse, M.; Salberta, E.; Wysocki, F.; Yamada, M.

    1982-01-01

    An experimental study of the gross MHD stability properties of Spheromak plasmas in the Proto S-1 A/B device is presented. Utilizing the previously demonstrated S-1 slow formation technique, plasmas have been produced which exhibit the predicted tilting instability in a regime of slightly negative field index. A relatively simple passive coil system suggested by numerical stability studies has proven to be effective in stabilizing the observed tilting mode

  16. Ab initio study on structural stability of uranium carbide

    International Nuclear Information System (INIS)

    Sahoo, B.D.; Joshi, K.D.; Gupta, Satish C.

    2013-01-01

    First principles calculations have been performed using plane wave pseudopotential and full potential linearized augmented plane wave (FP-LAPW) methods to analyze structural, elastic and dynamic stability of UC under hydrostatic compression. Our calculations within pseudopotential method suggest that the rocksalt (B1) structure will transform to body centered orthorhombic (bco) structure at ∼21.5 GPa. The FP-LAPW calculations put this transition at 23 GPa. The transition pressures determined from our calculations though agree reasonably with the experimental value of 27 GPa, the high pressure bco structure suggested by theory differs slightly from the experimentally reported pseudo bco phase. The elastic stability analysis of B1 phase suggests that the B1 to bco transition is driven by the failure of C 44 modulus. This finding is further substantiated by the lattice dynamic calculations which demonstrate that the B1 phase becomes dynamically unstable around the transition pressure and the instability is of long wavelength nature

  17. [Study on retention and stability of linear occlusal complete dentures].

    Science.gov (United States)

    Zhang, Ping; Xu, Jun

    2003-01-01

    To learn retention and stability of linear occlusal complete dentures by investigating the subjective feelings of patient and the value of retention force. Static retention forces of maxillary and mandibular dentures were measured for 25 patients wearing linear occlusal dentures by using Hz-1 retention dynamometer. The subjective feelings of patients in functional state were gained simultaneously through questionnaire. Linear occlusal dentures demonstrate good retention in static and dynamic state. Among patients with severe resorption of residual ridge (RRR), mandibular linear occlusal dentures (shown good retentive subjective feelings) demonstrate significantly smaller retention force than those with slight or medium degree of RRR. There is no correlation between the subjective feelings and the values of retention forces of mandibular dentures. The subjective feelings of patients wearing new linear occlusal dentures are much better than that of old anatomic occlusal dentures. Linear occlusal dentures improve the performances of dentures by enhancing their stability during mastication movement.

  18. Cable Stability

    Energy Technology Data Exchange (ETDEWEB)

    Bottura, L [European Organization for Nuclear Research, Geneva (Switzerland)

    2014-07-01

    Superconductor stability is at the core of the design of any successful cable and magnet application. This chapter reviews the initial understanding of the stability mechanism, and reviews matters of importance for stability such as the nature and magnitude of the perturbation spectrum and the cooling mechanisms. Various stability strategies are studied, providing criteria that depend on the desired design and operating conditions.

  19. Interosseous Ligament and Transverse Forearm Stability: A Biomechanical Cadaver Study.

    Science.gov (United States)

    Gutowski, Christina J; Darvish, Kurosh; Ilyas, Asif M; Jones, Christopher M

    2017-02-01

    The interosseous ligament (IOL) is known to be an important longitudinal stabilizer of the forearm. We hypothesize that it may also contribute to transverse stability, with pronosupination tensioning of the radius relative to the ulna. Therefore, when injured, we predict the interosseous space should widen in the transverse plane, enough to be appreciable on plain radiographs. A measurable difference in interosseous space, comparing an injured with an uninjured forearm, can potentially be of diagnostic and clinical value. Ten fresh-frozen cadaver arms (from 5 individuals) were radiographed in 6 different positions of forearm supination, first in an uninjured state and then with the IOL sectioned, both partially (central band only) and completely. The transverse interosseous distance was measured on radiographs using edge detection software and compared using analysis of variance and contrast analysis. The maximum range of pronosupination was also compared before and after injury, using a paired t test. Average maximum supination increased from 84° to 106°, and pronation from 69° to 84°, after the IOL was sectioned completely. Sectioning of the IOL led to a statistically significant increase in the interosseous distance, a minimum of 2 mm, in all but one forearm position. The IOL of the forearm plays an important role in providing transverse stability to the radius and ulna. When the IOL is sectioned, the forearm exhibits increased pronosupination range of motion. Radiographs of bilateral forearms taken in identical rotational position can reliably differentiate between an intact and torn IOL in cadavers. The IOL's stabilizing role during forearm rotation suggests a novel strategy for diagnosing forearm IOL injury using comparative radiographic measurements. Copyright © 2017 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

  20. A simple toroidal shell model for the study of feedback stabilization of resistive wall modes in a tokamak plasma

    International Nuclear Information System (INIS)

    Jhang, Hogun

    2008-01-01

    A study is conducted on the feedback stabilization of resistive wall modes (RWMs) in a tokamak plasma using a toroidal shell model. An analytically tractable form of the RWM dispersion relation is derived in the presence of a set of discrete feedback coil currents. A parametric study is carried out to optimize the feedback system configuration. It is shown that the total toroidal angle of a resistive wall spanned by the feedback coils and the poloidal angular extent of a feedback coil are crucial parameters to determine the efficacy of the feedback system

  1. Study of TBP stability limits in pyrolysis, radiolysis and hydrolysis

    International Nuclear Information System (INIS)

    Azzouz, A.; Attou, M.

    1985-10-01

    The present investigations deal with the determination of the stability limits of different degradation phenomena during TBP process achievement, its purification, storage or in radioelements extraction. The results were obtained using a simple and quick analysis method based on TBP:HC104 complex formation. The TBP is considered stable (when its degradation rate is less than 0,5% Vol.) for temperature less than 100 0 C and time contact value of about 2 hours. It was depicted that TBP has an appreciable stability under the following conditions: NaOH 0,1 N/TBP=0,5 ml/ml and time contact <4 hours; POC13/TBP=0,02 ml/ml and time contact <1 hour; concentrated acid/TBP=0,025 ml/ml and time contact <1 h. Radiation cumulative effect seems to be the main precursor of TBP degradation. However, its stability remains appreciable under certain conditions. Practically, in all the cases, TBP decomposition is mainly tied to C-O bond breakdown

  2. Assessing and Filing the Gap as a New Mode of Governance, lessons from a Preliminary Study carried out in the Cosenza's Public Prosecutors' Office

    Directory of Open Access Journals (Sweden)

    Diana Piana

    2012-06-01

    Full Text Available In all European countries courts and public prosecutor offices have been undergoing a long and comprehensive process of reform, target several different components of their organization and management. This phenomenon can be explained as the outcome of two combined forces: an increase demand of justice and a pressure from the international and supranational institutions. Accordingly, innovation has become a major issue in the judicial sector. Despite the attention devoted to it, much less effort has been made to comprehend the mechanisms that make organizations innovative. To what extent is leadership important? How may different organizational cultures facilitate or create obstacles to innovation? And to what extent can innovation be implemented through a top down approach in a peculiar organization, such as a judicial office? This article tells the story of a case study on a public prosecutors’ office located in the South of Italy. The pilot study has been framed and conducted as both normative and empirical in its own nature. Moreover, it represents a case study with a certain number of policy effects, as it turned into a roadmap which was adopted by the judicial office to improve its own organization and human resource management. This is the first study carried out in Italy using such methods with the objective to:a describe the implementation of organizational innovation (in this respect there had already been a study of the General Registry Office,b map intra-organizational routines and inter-connections between administration and the General Registry Office and between the GRO and the criminal records Office etc;c Identify skills to adapt and learn skills from daily routines and execution of specific tasks, as they are done in all public sectors.- If you really want to understand something, try first to change it - Thomas Eliot

  3. Where's Your Phone? A Survey of Where Women Aged 15-40 Carry Their Smartphone and Related Risk Perception: A Survey and Pilot Study.

    Science.gov (United States)

    Redmayne, Mary

    2017-01-01

    Smartphones are now owned by most young adults in many countries. Installed applications regularly update while the phone is in standby. If it is kept near the body, this can lead to considerably higher exposure to radiofrequency electromagnetic radiation than occurred without internet access. Very little is known about current smartphone carrying habits of young women. This survey used an online questionnaire to ask about smartphone location under several circumstances to inform the power calculation for a women's health study. They were also asked about risk perceptions. Data was analysed using Pearson chi square. Three age categories were made: 15-20, 21-30, 31-40. Smartphones were generally kept on standby (96% by day, 83% at night). Of all participants, in the last week the most common locations of the phone when not in use or during passive use was off-body (86%), in the hand (58%), a skirt/trouser pocket (57%), or against the breast (15%). Pocket and near-the-breast storage were significant by age (χ215.04, p = 0.001 and χ210.96, p = 0.04, respectively), both positively influenced by the youngest group. The same influence lay in the association between holding the phone (χ211.082, p = 0.004) and pocket-storage (χ219.971, p<0.001) during passive use. For calls, 36.5% solely used the phone against the head. More than half kept the phone 20-50 cms from their head at night (53%), while 13% kept it closer than 20 cms. Many (36%) thought RF-EMR exposure was related to health problems while 16% did not. There was no relationship between thinking RF-EMR exposure causes health problems in general and carrying the phone against the upper or lower body (p = 0.69 and p = 0.212, respectively). However, calls with the phone against the head were positively related to perception of health risk (χ2 6.695, p = 0.035). Our findings can be used in the power calculation for a case-control study.

  4. Where's Your Phone? A Survey of Where Women Aged 15-40 Carry Their Smartphone and Related Risk Perception: A Survey and Pilot Study.

    Directory of Open Access Journals (Sweden)

    Mary Redmayne

    Full Text Available Smartphones are now owned by most young adults in many countries. Installed applications regularly update while the phone is in standby. If it is kept near the body, this can lead to considerably higher exposure to radiofrequency electromagnetic radiation than occurred without internet access. Very little is known about current smartphone carrying habits of young women. This survey used an online questionnaire to ask about smartphone location under several circumstances to inform the power calculation for a women's health study. They were also asked about risk perceptions. Data was analysed using Pearson chi square. Three age categories were made: 15-20, 21-30, 31-40. Smartphones were generally kept on standby (96% by day, 83% at night. Of all participants, in the last week the most common locations of the phone when not in use or during passive use was off-body (86%, in the hand (58%, a skirt/trouser pocket (57%, or against the breast (15%. Pocket and near-the-breast storage were significant by age (χ215.04, p = 0.001 and χ210.96, p = 0.04, respectively, both positively influenced by the youngest group. The same influence lay in the association between holding the phone (χ211.082, p = 0.004 and pocket-storage (χ219.971, p<0.001 during passive use. For calls, 36.5% solely used the phone against the head. More than half kept the phone 20-50 cms from their head at night (53%, while 13% kept it closer than 20 cms. Many (36% thought RF-EMR exposure was related to health problems while 16% did not. There was no relationship between thinking RF-EMR exposure causes health problems in general and carrying the phone against the upper or lower body (p = 0.69 and p = 0.212, respectively. However, calls with the phone against the head were positively related to perception of health risk (χ2 6.695, p = 0.035. Our findings can be used in the power calculation for a case-control study.

  5. Macrosomic Neonates Carry Increased Risk of Dental Caries in Early Childhood: Findings from a Cohort Study, the Okinawa Child Health Study, Japan.

    Directory of Open Access Journals (Sweden)

    Hiroshi Yokomichi

    Full Text Available Although many studies have discussed health risks in neonates with a low birth weight, few studies have focused on the risks in neonates with a high birth weight. The objective of this study was to determine whether differences in the incidence of dental caries in early childhood are associated with birth weight status.A total of 117,175 children born in Okinawa Prefecture, Japan from 1997 to 2007 were included in this study. Medical professionals collected information about birth records, growth and development, parental child-rearing practices and dental health at 3 months, 18 months and 3 years of age. The risk of dental caries among neonates with macrosomia (birth weight ≥4000 g was compared with that among neonates with normal weight (2500-3999 g. Sensitivity analyses included 'large for gestational age' (LGA, birth weight above the 90th percentile for gestational age, which was relative to 'appropriate for gestational age' (birth weight between 10th and 90th percentiles. Relative risks and relative risk increases were estimated by multivariate Poisson regression.At 3 years of age, the relative risk increases for dental caries after adjusting for confounding factors were 19% [95% confidence interval (CI, 11%-28%, P < 0.001] for macrosomic neonates and 12% (95% CI, 9%-16%, P < 0.001 for LGA neonates.Macrosomia and LGA were associated with an increased risk of dental caries in early childhood. Particular attention should be paid to abnormally large neonates.

  6. 基于物元分析理论的旅游承载力研究%Study on Tourist Carrying Capacity Based on Matter Element Analysis

    Institute of Scientific and Technical Information of China (English)

    刘云国

    2005-01-01

    This paper proposes that it is necessary to implement the concept of tourist carrying capacity to facilitate the tourism planning, and presents a method to evaluate the carrying capacity. The method cailed matter element analysis can solve the uncertain a,nd incompatible problem of the evaluated factors in assessing carrying capacity.The current state of a destination s carrying capacity can be determined by establishing the standard indexes and the matter element model. Through the evaluating of the travel industry zones of the Autonomous Prefecture of Western Hunan, the method is proved to be simple and feasible, and it is improved to be significant for the tourism planning and determination as well as the sustainable development of the regional tourism.

  7. Study of sodium boiling during a power transient in a heating duct. Investigation carried out within the scope of a study on the safety of fast neutron reactors

    International Nuclear Information System (INIS)

    Seiler, J.-M.

    1977-01-01

    This work comprises an experimental study and a physical and theoretical interpretation of sodium boiling during a power transient in conditions simulating a power excursion accident in a breeder reactor. The experimental study was performed on an 'out of pile' system with forced sodium convection. It enabled a detailed study to be made of the draining of the heating duct representing a part of a reactor assembly (expansion of the double-phase area on the heating part of the pin). The physical and theoretical interpretation rests on a very simple calculation model solely describing the heat transfers in the duct, assuming that the fluid stays liquid. The extension of the boiling is governed by the initial overheating and the boiling conditioned by thermal inertias of the walls. The extent of the overheating appears to depend on the degree of initial under-saturation. In the absence of overheating, the rate at which the double-phase front moves is controlled by the saturated boiling. This front is well localised when the central temperature gradient is significant. The draining rate is then directly proportional to the growth rate of the temperature in the liquid. The model employed in the CASPAR code for describing power excursion experiments in single liquid phase is described. This code makes it possible to calculate the heat transfers occurring in a forced system by a heating part, a coolant in movement and possibly a part representing an outer cover [fr

  8. Preparation of grafted microspheres CPVA-g-PSSS and studies on their drug-carrying and colon-specific drug delivery properties

    International Nuclear Information System (INIS)

    Gao, Baojiao; Fang, Li; Men, Jiying; Zhang, Yanyan

    2013-01-01

    Sodium 4-styrene sulfonate (SSS) was graft-polymerized on the surfaces of crosslinked polyvinyl alcohol (CPVA) microspheres in a manner of surface-initiated graft-polymerization by using cerium salt-hydroxyl group redox initiation system, obtaining the grafted microspheres CPVA-g-PSSS. The chemical structure and physicochemical characters of CPVA-g-PSSS microspheres were fully characterized with infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and zeta potential determination. The aim of this work is to constitute a novel colon-specific drug delivery system via molecular design by using CPVA-g-PSSS microspheres as the drug-carrying material and by taking metronidazole (MTZ) as the model drug. The drug-carrying ability and mechanism of the grafted microspheres CPVA-g-PSSS for MTZ were investigated. Finally, in-vitro release tests for the drug-carrying microspheres were conducted. The experimental results show that in an acidic medium, the grafted microspheres CPVA-g-PSSS exhibit strong adsorption ability for MTZ by driving of electrostatic interaction, and have an adsorption capacity of 112 mg/g, displaying the high efficiency of drug-carrying. The in-vitro release behavior of the drug-carried microspheres is highly pH-sensitive. In the medium of pH = 1, the drug-carrying microspheres do not release the drug, whereas in the medium of pH = 7.4, a sudden delivery phenomenon of the drug will occur, displaying an excellent colon-specific drug delivery behavior. Highlights: ► A metronidazole colon-specific drug delivery was constituted using grafted polymeric microspheres. ► Grafted polymeric microspheres CPVA-g-PSSS were prepared via surface-initiated graft-polymerization. ► The release of the drug-carrying microspheres is highly pH-sensitive. ► The drug-carrying microspheres display an excellent colon-specific drug delivery behavior

  9. Preparation of grafted microspheres CPVA-g-PSSS and studies on their drug-carrying and colon-specific drug delivery properties

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Baojiao, E-mail: gaobaojiao@126.com [Department of Chemical Engineering, North University of China, Taiyuan 030051, People' s Republic of China (China); Fang, Li [School of Chemistry and Chemical engineering, Shanxi University, Taiyuan 030006 (China); Men, Jiying; Zhang, Yanyan [Department of Chemical Engineering, North University of China, Taiyuan 030051, People' s Republic of China (China)

    2013-04-01

    Sodium 4-styrene sulfonate (SSS) was graft-polymerized on the surfaces of crosslinked polyvinyl alcohol (CPVA) microspheres in a manner of surface-initiated graft-polymerization by using cerium salt-hydroxyl group redox initiation system, obtaining the grafted microspheres CPVA-g-PSSS. The chemical structure and physicochemical characters of CPVA-g-PSSS microspheres were fully characterized with infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and zeta potential determination. The aim of this work is to constitute a novel colon-specific drug delivery system via molecular design by using CPVA-g-PSSS microspheres as the drug-carrying material and by taking metronidazole (MTZ) as the model drug. The drug-carrying ability and mechanism of the grafted microspheres CPVA-g-PSSS for MTZ were investigated. Finally, in-vitro release tests for the drug-carrying microspheres were conducted. The experimental results show that in an acidic medium, the grafted microspheres CPVA-g-PSSS exhibit strong adsorption ability for MTZ by driving of electrostatic interaction, and have an adsorption capacity of 112 mg/g, displaying the high efficiency of drug-carrying. The in-vitro release behavior of the drug-carried microspheres is highly pH-sensitive. In the medium of pH = 1, the drug-carrying microspheres do not release the drug, whereas in the medium of pH = 7.4, a sudden delivery phenomenon of the drug will occur, displaying an excellent colon-specific drug delivery behavior. Highlights: ► A metronidazole colon-specific drug delivery was constituted using grafted polymeric microspheres. ► Grafted polymeric microspheres CPVA-g-PSSS were prepared via surface-initiated graft-polymerization. ► The release of the drug-carrying microspheres is highly pH-sensitive. ► The drug-carrying microspheres display an excellent colon-specific drug delivery behavior.

  10. [Gnathosonics study of the occlusal stability of orthodontic patients].

    Science.gov (United States)

    Jiang, Ruo-Ping; Tyson, Kenneth W

    2008-02-18

    To analysis the stability of the occlusion before and after the orthodontic treatment by gnathosonics; To evaluate the reliability of the stethoscope method by comparing the subjective(stethoscopy) and objective(digital occlusal sound recording) methods of checking the occlusal sound. Sixty-four new patients with malocclusion were selected as the before treatment group, these patients were not subject to any previous orthodontic treatment, facial surgery or injury; the treatment complete group included 15 patients who were just debonded the fixed appliance. Both stethoscope and digital occlusal sound recording were used to evaluate the occlusal sound. The occlusal stability before and after orthodontic treatment was compared depending on the results from the objective examination. The stability of the occlusion between different types of malocclusion before treatment was compared also. The veracity and reliability of the stethoscope method were analysis using the objective method as the golden standard. (1) 43.75%(28/64) of the 64 new patients showed unstable occlusal sound. ANOVA test showed that there were no statistically significant differences between the unstable rates in different type of malocclusion. (2) 40% (6/15) of the 15 treatment complete patients had unstable occlusions. (3) There were no statistically significant differences between the unstable rate pre- and post-treatment. (4) The veracity of the stethoscopes was 81.01% (64/79). (5) Kappa test showed that the stethoscopes and the digital recording method were consistent; the Kappa value was 0.488, Pocclusion rate between the two groups, and between the different types of malocclusion before treatment. (2) Using stethoscopes method to check the occlusal sound is reliable. The veracity could be improved significantly with increased experiences.

  11. Low-Temperature Bainite: A Thermal Stability Study

    Science.gov (United States)

    Santajuana, Miguel A.; Rementeria, Rosalia; Kuntz, Matthias; Jimenez, Jose A.; Caballero, Francisca G.; Garcia-Mateo, Carlos

    2018-06-01

    The thermal stability of nanobainitic structures obtained by heat treating two different high-carbon high-silicon steels at temperatures between 200 °C and 600 °C has been investigated by means of three complementary techniques, i.e., field emission gun-scanning electron microscopy, X-ray diffraction, and high-resolution dilatometry. Three main stages have been established, each of them characterized by a distinctive microstructure. Furthermore, the nanocrystalline structure generated by the bainite reaction confers the steel with an extraordinary tempering resistance.

  12. STUDY ON THE THERMAL STABILITY OF EPA AND DHA IN MUJAHIR (Oreochromis mossambicus FISH OIL

    Directory of Open Access Journals (Sweden)

    Ngatidjo Hadipranoto

    2010-06-01

    Full Text Available EPA (Eicosapentaenoic acid and DHA (Docosahexaenoic acid content in common fresh water fish : mujahir (Oreochromis mossambicus after indirect heating were analysed. The aims of this study were to determine the effect of indirect heating process and α-tocopherol additions on both fatty acid stability.Lipids content in the mujahir fillets were extracted by Folch method using chloroform-metanol (2:1 mixture. Fatty acids in fish oil were converted to fatty acid methyl esters and then injected into gas chromatography to determine the EPA and DHA concentration. Operating condition of gas chromatography were programmed as follows: injection port temperature at 270 oC, detector at 280 oC, initial column temperature at 200 oC, and the final at 280 oC, the carrier gas was helium with flow rate of 10 ml per minute and temperature of column was increased gradually at 10 oC per minute. The effect of α-tocopherol addition on the stability of EPA and DHA was studied by adding α-tocopherol at 50 to 200 mg per kilogram sample before indirect heating process was carried out.The analysis of mujahir fish oil showed that the content of EPA and DHA in 100 grams fresh sample was 105 and 406,5 mg respectivelly. Indirect heating caused the EPA and DHA content decreased significantly. The addition of α-tocopherol results in a positive corelation between α-tocopherol concentration added and the decrease of EPA and DHA content during the heating process.   Keywords: fatty acid, eicosapentaenoic acid, docosahexaenoic acid

  13. Synthesis, structural and property studies of Ni doped cadmium sulphide quantum dots stabilized in DETA matrix

    International Nuclear Information System (INIS)

    Mercy, A.; Jesper Anandhi, A.; Sakthi Murugesan, K.; Jayavel, R.; Kanagadurai, R.; Milton Boaz, B.

    2014-01-01

    Highlights: • Ni doped CdS nanoparticles are synthesized by chemical precipitation method. • X-ray diffractogram confirms the formation of CdS with dopant. • FTIR spectrum reveals that the nanosamples are encapsulated by DETA. • The UV-VIS absorption spectra shows strong blue shift. - Abstract: Pure and Nickel doped cadmium sulphide nanoparticles at pH value 10 with three different concentrations have been synthesized by chemical precipitation method. Diethylene triamine was used as stabilizing agent to control the particle size as quantum dots without any agglomeration. The synthesized samples were characterized with X-ray diffraction (XRD), High resolution scanning electron microscopy (HRSEM), Energy dispersive X-ray analysis (EDAX), Transmission electron microscopy (TEM), Ultraviolet–Visible absorption spectroscopy (UV–VIS), Fourier transform infrared (FTIR) spectroscopy and photoluminescence (PL) studies. The nano crystalline nature of the as prepared samples is confirmed using XRD analysis. The average size of Ni doped cadmium sulphide nanoparticles calculated from Debye Scherer formula was of the order of 1.5–3 nm and that of pure CdS nanoparticles was of the order of 6–7 nm. The same value of the particle size was confirmed by using Williamson Hall plot as well as Henglein’s formula. X-ray peak broadening analysis was carried out using Williamson–Hall plot. The surface morphology studies of the sample using HRSEM images show the formation of nanoclusters and the EDAX spectra confirms the presence of cadmium sulphide and nickel elements in the sample. TEM images establish the stabilization of CdS nanoparticles in DETA. The UV–VIS absorption spectra of the sample show blue shift in the absorption region due to the quantum confinement effect. FTIR studies have been carried out to establish the presence of bonding by capping agent in the Ni doped samples. The synthesized samples show photoluminescence in the spectral region from 350 to 550

  14. Where’s Your Phone? A Survey of Where Women Aged 15-40 Carry Their Smartphone and Related Risk Perception: A Survey and Pilot Study

    Science.gov (United States)

    2017-01-01

    Smartphones are now owned by most young adults in many countries. Installed applications regularly update while the phone is in standby. If it is kept near the body, this can lead to considerably higher exposure to radiofrequency electromagnetic radiation than occurred without internet access. Very little is known about current smartphone carrying habits of young women. This survey used an online questionnaire to ask about smartphone location under several circumstances to inform the power calculation for a women’s health study. They were also asked about risk perceptions. Data was analysed using Pearson chi square. Three age categories were made: 15–20, 21–30, 31–40. Smartphones were generally kept on standby (96% by day, 83% at night). Of all participants, in the last week the most common locations of the phone when not in use or during passive use was off-body (86%), in the hand (58%), a skirt/trouser pocket (57%), or against the breast (15%). Pocket and near-the-breast storage were significant by age (χ215.04, p = 0.001 and χ210.96, p = 0.04, respectively), both positively influenced by the youngest group. The same influence lay in the association between holding the phone (χ211.082, p = 0.004) and pocket-storage (χ219.971, pperception of health risk (χ2 6.695, p = 0.035). Our findings can be used in the power calculation for a case-control study. PMID:28060844

  15. Study of global stability of tall buildings with prestressed slabs

    Directory of Open Access Journals (Sweden)

    L. A. Feitosa

    Full Text Available The use of prestressed concrete flat slabs in buildings has been increasing in recent years in the Brazilian market. Since the implementation of tall and slender buildings a trend in civil engineering and architecture fields, arises from the use of prestressed slabs a difficulty in ensuring the overall stability of a building without beams. In order to evaluate the efficiency of the main bracing systems used in this type of building, namely pillars in formed "U" in elevator shafts and stairs, and pillars in which the lengths are significantly larger than their widths, was elaborated a computational models of fictional buildings, which were processed and analyzed using the software CAD/TQS. From the variation of parameters such as: geometry of the pillars, thick slabs, characteristic strength of the concrete, reduceofthe coefficient of inertia for consideration of non-linearities of the physical elements, stiffness of the connections between slabs and pillars, among others, to analyze the influence of these variables on the overall stability of the building from the facing of instability parameter Gama Z, under Brazilian standard NBR 6118, in addition to performing the processing of building using the P-Delta iterative calculation method for the same purpose.

  16. Thermodynamic and experimental study on phase stability in nanocrystalline alloys

    International Nuclear Information System (INIS)

    Xu Wenwu; Song Xiaoyan; Lu Nianduan; Huang Chuan

    2010-01-01

    Nanocrystalline alloys exhibit apparently different phase transformation characteristics in comparison to the conventional polycrystalline alloys. The special phase stability and phase transformation behavior, as well as the essential mechanisms of the nanocrystalline alloys, were described quantitatively in a nanothermodynamic point of view. By introducing the relationship between the excess volume at the grain boundary and the nanograin size, the Gibbs free energy was determined distinctly as a function of temperature and the nanograin size. Accordingly, the grain-size-dependence of the phase stability and phase transformation characteristics of the nanocrystalline alloy were calculated systematically, and the correlations between the phase constitution, the phase transformation temperature and the critical nanograin size were predicted. A series of experiments was performed to investigate the phase transformations at room temperature and high temperatures using the nanocrystalline Sm 2 Co 17 alloy as an example. The phase constitution and phase transformation sequence found in nanocrystalline Sm 2 Co 17 alloys with various grain-size levels agree well with the calculations by the nanothermodynamic model.

  17. How to model the stability of terraced slopes? The case study of Tresenda (northern Italy)

    Science.gov (United States)

    Camera, Corrado; Apuani, Tiziana; Masetti, Marco

    2015-04-01

    Terraces are very common morphological features all around the Mediterranean Basin. They have been built to adapt the natural morphology of the territory to the development of anthropogenic activities, particularly agriculture. However, the increasing land abandonment during the last century is leading to soil degradation and stability issues, mainly due to lack of maintenance of these peculiar environments. The objective of this study was to develop a coupled hydrologic-stability model to identify possible triggering areas of superficial landslides during intense rainfall events. The model was tested on a slope uphill of the village of Tresenda, in Northern Italy, which experienced several superficial landslides in the last 35 years. Distributed stability analyses are usually carried out using an infinite slope approach, but in the case of terraces some basic assumptions of this method fail: the parallelism between topographical surface and potential sliding surface and the high ratio between slope length and failure surface depth are the most important examples. In addition, the interest is more on the stability of the terrace system (dry stone retaining wall and backfill soil) and not on soil alone. For these reasons, a stability analysis based on the global method of equilibrium is applied and soft coupled to a well know hydrological model (STARWARS). Sections of terrace, one cell wide, are recognized from the base of a wall to the top of the closest downstream one, and each cell (1 x 1 m2) is considered as a slice. The method of Sarma for circular and non-circular failure is applied. The very fine horizontal resolution (1 m) is crucial to take into consideration the hydrogeological and mechanical properties of dry stone walls (0.6-1.0 m wide). A sensitivity analysis was conducted for saturated water content, initial volumetric water content, the cohesion and friction angle of soil and walls and soil depth. The results of the sensitivity analysis showed that

  18. Feasibility study and technical proposal for long-term observations of bedrock stability with gps

    International Nuclear Information System (INIS)

    Ruizhi Chen; Kakkuri, J.

    1994-01-01

    In order to study the regional crustal deformation pattern in the territory of Finland, the Finnish Geodetic Institute is establishing the Finnish Permanent GPS Network, which is part of the Fennoscandian Permanent GPS Network. The Finnish GPS Network consists of a 12 stations located in different geological structures. The operation procedure of the network is described in the report. Feasibility study for monitoring the bedrock stability at local scale was performed. The study was carried out on the basis of an experiment on a baseline of 1041 metres. Twelve artificial movements ranging from 1 mm to 22 mm were generated with a precision-manufactured screw drive (with an accuracy of better than +-0.05 mm). The artificial movements were then detected with the GPS measurements. A preliminary analysis of the GPS data shows that the maximum difference between the GPS detected movements and the artificial movements is 0.9 mm with a standard deviation of +-0.46 mm. The observation time for reaching such accuracy is about 55 minutes. Three GPS networks were preliminarily designed for the radioactive waste disposal investigation sites of Olkiluoto, Kivetty and Romuvaara. Detailed research plan for achieving the best possible result from GPS measurements was proposed. (58 refs., 25 figs., 1 tab.)

  19. Stability studies of plasma modification effects of polylactide and polycaprolactone surface layers

    Energy Technology Data Exchange (ETDEWEB)

    Moraczewski, Krzysztof, E-mail: kmm@ukw.edu.pl [Kazimierz Wielki University, Chodkiewicza 30, 85-064 Bydgoszcz (Poland); Stepczyńska, Magdalena [Kazimierz Wielki University, Chodkiewicza 30, 85-064 Bydgoszcz (Poland); Malinowski, Rafał [Institute for Engineering of Polymer Materials and Dyes, Marii Skłodowskiej-Curie 55, 87‐100 Toruń (Poland); Rytlewski, Piotr; Jagodziński, Bartłomiej; Żenkiewicz, Marian [Kazimierz Wielki University, Chodkiewicza 30, 85-064 Bydgoszcz (Poland)

    2016-07-30

    Highlights: • Plasma modification affects surface roughness, wettability and surface energy. • Polylactide and polycaprolactone aging causes decay of the modification effects. • Changes in the surface characteristic and wettability deterioration were observed. • The decay occurs due to migration of low molecular weight molecules to the surface. • Plasma modification effect lasts longer in the case of polycaprolactone. - Abstract: The article presents results of research on the stability of oxygen plasma modification effects of polylactide and polycaprolactone surface layers. The modified samples were aged for three, six or nine weeks. The studies were carried out using scanning electron microscopy, goniometry and Fourier transform infrared spectroscopy. Studies have shown that the plasma modification has significant impact on the geometric structure and chemical composition of the surface, wettability and surface energy of tested polymers. The modification effects are not permanent. It has been observed that over time the effects of plasma modification fade. Studies have shown that modifying effect lasts longer in the case of polycaprolactone.

  20. Experimental study on dynamic stabilization of the MHD instability in pinch plasmas surrounded by a conducting shell

    International Nuclear Information System (INIS)

    Yamamoto, Shunji; Ishii, Shozo; Kawamoto, Shigeshi; Hayashi, Izumi

    1981-01-01

    Experimental study on the dynamic stabilization of MHD instability with a pinch plasma generator was done, and the results were compared with the theoretical works. The previous results of theoretical analysis showed that a conducting shell worked effectively for the dynamic stabilization of MHD instability. The present experiment was carried out with a linear plasma generator which consisted of a discharge tube, a coil and a conducting shell. The macroscopic behavior of plasma was observed with an image converter camera, and the phenomena due to the instability was measured by a magnetic probe. A sine-cosine coil was employed for the observation of the growth of instability. The following results were obtained. When the frequency of RF current for dynamic stabilization was larger than the growth rate of instability, the experimental results were in agreement with the theoretical ones. The effect of a conducting shell was clearly seen. For the helical instability of short wave length, the dynamic stabilization was easily obtained even without a conducting shell. The self-reversal phenomena due to the helical instability of short wave length was suppressed by the RF current along the axis of a discharge tube. (Kato, T.)

  1. Carrying capacity and tourism planning. case study at Praia Brava- Itajai, in face to the settlement of Canto da Brava Resort

    Directory of Open Access Journals (Sweden)

    Doris Van de Meene Ruschmann

    2008-05-01

    Full Text Available Sustainable tourism presumes cultural authenticity, social inclusion, conservation of natural resources and service quality. Those are major issues standing for economical viability in the long run. This article analyzes carrying capacity in Praia Brava, Itajai/SC, evaluating environmental comfort for dwellers as well as for users of the beach building future scenarios as Canto da Brava resort is settled. Tourism carrying capacity is tied to methods of identification and evaluation of environmental indicators. In this case, Cifuentes Method was chosen because it integrates physical, biotical and infra structural factors, through assessment of physical, real and effective carrying capacity. Quantitative results have been considered analyzing impacts and tolerable limits of change taking into account users perception.

  2. Mechanisms of motor recovery after subtotal spinal cord injury: insights from the study of mice carrying a mutation (WldS) that delays cellular responses to injury.

    Science.gov (United States)

    Zhang, Z; Guth, L; Steward, O

    1998-01-01

    Partial lesions of the mammalian spinal cord result in an immediate motor impairment that recovers gradually over time; however, the cellular mechanisms responsible for the transient nature of this paralysis have not been defined. A unique opportunity to identify those injury-induced cellular responses that mediate the recovery of function has arisen from the discovery of a unique mutant strain of mice in which the onset of Wallerian degeneration is dramatically delayed. In this strain of mice (designated WldS for Wallerian degeneration, slow), many of the cellular responses to spinal cord injury are also delayed. We have used this experimental animal model to evaluate possible causal relationships between these delayed cellular responses and the onset of functional recovery. For this purpose, we have compared the time course of locomotor recovery in C57BL/6 (control) mice and in WldS (mutant) mice by hemisecting the spinal cord at T8 and evaluating locomotor function at daily postoperative intervals. The time course of locomotor recovery (as determined by the Tarlov open-field walking procedure) was substantially delayed in mice carrying the WldS mutation: C57BL/6 control mice began to stand and walk within 6 days (mean Tarlov score of 4), whereas mutant mice did not exhibit comparable locomotor function until 16 days postoperatively. (a) The rapid return of locomotor function in the C57BL/6 mice suggests that the recovery resulted from processes of functional plasticity rather than from regeneration or collateral sprouting of nerve fibers. (b) The marked delay in the return of locomotor function in WldS mice indicates that the processes of neuroplasticity are induced by degenerative changes in the damaged neurons. (c) These strains of mice can be effectively used in future studies to elucidate the specific biochemical and physiological alterations responsible for inducing functional plasticity and restoring locomotor function after spinal cord injury.

  3. Lobular neoplasia detected in MRI-guided core biopsy carries a high risk for upgrade: a study of 63 cases from four different institutions

    Science.gov (United States)

    Khoury, Thaer; Kumar, Prasanna R; Li, Zaibo; Karabakhtsian, Rouzan G; Sanati, Souzan; Chen, Xiwei; Wang, Dan; Liu, Song; Reig, Beatriu

    2017-01-01

    There are certain criteria to recommend surgical excision for lobular neoplasia diagnosed in mammographically detected core biopsy. The aims of this study are to explore the rate of upgrade of lobular neoplasia detected in magnetic resonance imaging (MRI)-guided biopsy and to investigate the clinicopathological and radiological features that could predict upgrade. We reviewed 1655 MRI-guided core biopsies yielding 63 (4%) cases of lobular neoplasia. Key clinical features were recorded. MRI findings including mass vs non-mass enhancement and the reason for biopsy were also recorded. An upgrade was defined as the presence of invasive carcinoma or ductal carcinoma in situ in subsequent surgical excision. The overall rate of lobular neoplasia in MRI-guided core biopsy ranged from 2 to 7%, with an average of 4%. A total of 15 (24%) cases had an upgrade, including 5 cases of invasive carcinoma and 10 cases of ductal carcinoma in situ. Pure lobular neoplasia was identified in 34 cases, 11 (32%) of which had upgrade. In this group, an ipsilateral concurrent or past history of breast cancer was found to be associated with a higher risk of upgrade (6/11, 55%) than contralateral breast cancer (1 of 12, 8%; P = 0.03). To our knowledge, this is the largest series of lobular neoplasia diagnosed in MRI-guided core biopsy. The incidence of lobular neoplasia is relatively low. Lobular neoplasia detected in MRI-guided biopsy carries a high risk for upgrade warranting surgical excision. However, more cases from different types of institutions are needed to verify our results. PMID:26564004

  4. [Distribution of entero-parasitic infections in the Peruvian Highland: study carried out in six rural communities of the department of Puno, Peru].

    Science.gov (United States)

    Maco Flores, Vicente; Marcos Raymundo, Luis A; Terashima Iwashita, Angélica; Samalvides Cuba, Frine; Gotuzzo Herencia, Eduardo

    2002-01-01

    A prevalence study was carried out in six rural communities in the Peruvian Highlands with the purpose of achieving a better understanding of the distribution of entero-parasites. The communities were located along the banks of Lake Titicaca, in the provinces of Puno and El Collao, Department of Puno, Peru, at 3,800 m.a.s.l. To that effect, a total of 91 feces samples of adults and children from the following communities were analyzed: Conchaca, Puñutani, Capalla, Culta, Maraesqueña, and Jaillihuaya. Analysis techniques included Direct Examination, Kato Technique, Technique of Spontaneous Sedimentation in a Test Tube and the Lumbreras Rapid Sedimentation Technique. The general prelavence of intestinal parasitosis was found to be 91.2%. The pathogenic entero-parasites found were, in order of frequency, as follows: Hymenolepis nana 6.6%, Entamoeba histolytica 5.5%, Giardia lamblia 3.3%, Taenia sp. 2.2%, Ascaris lumbricoides 2.2%, Trichuris trichiura 1.1%, and Enterobius vermicularis 1.1%. The frequency of the non-pathogenic entero-parasites was as follows: Entamoeba coli 78%, Endolimax nana 39.6%, Iodamoeba butschlii 14.3%, Blastocystis hominis 9.9%, and Chilomastix mesnili 2.2%. Most of the patients had poly parasitism (58.2%), and protozoan infections prevailed over helminthic infection. From the total number of patients infected, 41.8% had one parasite, 33.0% had two parasites, 11.0% had three parasites, 4.4% had four parasites, and 1.1% had five parasites. These results show the high rates of parasitism in the rural population on the banks of Lake Titicaca, which would be associated with socioeconomic factors and the poor environmental sanitation conditions in this area.

  5. Perinatal mortality among infants born during health user-fees (Cash & Carry) and the national health insurance scheme (NHIS) eras in Ghana: a cross-sectional study.

    Science.gov (United States)

    Ibrahim, Abdallah; Maya, Ernest T; Donkor, Ernestina; Agyepong, Irene A; Adanu, Richard M

    2016-12-08

    This research determined the rates of perinatal mortality among infants delivered under Ghana's national health insurance scheme (NHIS) compared to infants delivered under the previous "Cash and Carry" system in Northern Region, especially as the country takes stock of its progress toward meeting the Millennium Development Goals (MDG) 4 and 5. The labor and maternity wards delivery records of infants delivered before and after the implementation of the NHIS in Northern Region were examined. Records of available daily deliveries during the two health systems were extracted. Fisher's exact tests of non-random association were used to examine the bivariate association between categorical independent variables and perinatal mortality. On average, 8% of infants delivered during the health user-fee (Cash & Carry) died compared to about 4% infant deaths during the NHIS delivery fee exemption period in Northern Region, Ghana. There were no remarkable difference in the rate of infant deaths among mothers in almost all age categories in both the Cash and Carry and the NHIS periods except in mothers age 35 years and older. Infants born to multiparous mothers were significantly more likely to die than those born to first time mothers. There were more twin deaths during the Cash and Carry system (p = 0.001) compared to the NHIS system. Deliveries by caesarean section increased from an average of 14% in the "Cash and Carry" era to an average of 20% in the NHIS era. The overall rate of perinatal mortality declined by half (50%) in infants born during the NHIS era compared to the Cash and Carry era. However, caesarean deliveries increased during the NHIS era. These findings suggest that pregnant women in the Northern Region of Ghana were able to access the opportunity to utilize the NHIS for antenatal visits and possibly utilized skilled care at delivery at no cost or very minimal cost to them, which therefore improved Ghana's progress towards meeting the MDG 4, (reducing

  6. Detailed Equivalent VSC-HVDC Modelling for Time Domain Harmonic Stability Studies in Wind Power Plants

    DEFF Research Database (Denmark)

    Glasdam, Jakob Bærholm; Bak, Claus Leth; Kocewiak, Lukasz Hubert

    2018-01-01

    system with 201 voltage levels, without loss of accuracy compared to conventional modelling of the converter. Harmonic stability is a core concern for both existing and future offshore wind power plants (OWPPs). A harmonic stability study will be undertaken with focus on the number of wind turbine...

  7. Stability and Change in Work Values: A Meta-Analysis of Longitudinal Studies

    Science.gov (United States)

    Jin, Jing; Rounds, James

    2012-01-01

    A meta-analysis of longitudinal studies was conducted to investigate stability and change in work values across the life span. Both rank-order stability and mean-level change were investigated using an integrative classification for intrinsic, extrinsic, social and status work values (Ross, Schwartz, & Surkis, 1999). Results of rank-order…

  8. Materials testing for in situ stabilization treatability study of INEEL mixed wastes soils

    International Nuclear Information System (INIS)

    Heiser, J.; Fuhrmann, M.

    1997-09-01

    This report describes the contaminant-specific materials testing phase of the In Situ Stabilization Comprehensive Environment Response, Compensation, and Liability Act (CERCLA) Treatability Study (TS). The purpose of materials testing is to measure the effectiveness of grouting agents to stabilize Idaho National Engineering and Environmental Laboratory (INEEL) Acid Pit soils and select a grout material for use in the Cold Test Demonstration and Acid Pit Stabilization Treatability Study within the Subsurface Disposal Area (SDA) at the Radioactive Waste Management Complex (RWMC). Test results will assist the selecting a grout material for the follow-on demonstrations described in Test Plan for the Cold Test Demonstration and Acid Pit Stabilization Phases of the In Situ Stabilization Treatability Study at the Radioactive Waste Management Complex

  9. Stability analysis and trend study of a balloon tethered in a wind, with experimental comparisons

    Science.gov (United States)

    Redd, L. T.; Bland, S. R.; Bennett, R. M.

    1973-01-01

    A stability analysis and trend study for a balloon tethered in a steady wind are presented. The linearized, stability-derivative type analysis includes balloon aerodynamics, buoyancy, mass (including apparent mass), and static forces resulting from the tether cable. The analysis has been applied to a balloon 7.64 m in length, and the results are compared with those from tow tests of this balloon. This comparison shows that the analysis gives reasonable predictions for the damping, frequencies, modes of motion, and stability boundaries exhibited by the balloon. A trend study for the 7.64-m balloon was made to illustrate how the stability boundaries are affected by changes in individual stability parameters. The trends indicated in this study may also be applicable to many other tethered-balloon systems.

  10. SAXS Study of Sterically Stabilized Lipid Nanocarriers Functionalized by DNA

    Science.gov (United States)

    Angelov, Borislav; Angelova, Angelina; Filippov, Sergey; Karlsson, Göran; Terrill, Nick; Lesieur, Sylviane; Štěpánek, Petr

    2012-03-01

    The structure of novel spontaneously self-assembled plasmid DNA/lipid complexes is investigated by means of synchrotron radiation small-angle X-ray scattering (SAXS) and Cryo-TEM imaging. Liquid crystalline (LC) hydrated lipid systems are prepared using the non-ionic lipids monoolein and DOPE-PEG2000 and the cationic amphiphile CTAB. The employed plasmid DNA (pDNA) is encoding for the human protein brain-derived neurotrophic factor (BDNF). A coexistence of nanoparticulate objects with different LC inner organizations is established. A transition from bicontinuous membrane sponges, cubosome intermediates and unilamelar liposomes to multilamellar vesicles, functionalized by pDNA, is favoured upon binding and compaction of pBDNF onto the cationic PEGylated lipid nanocarriers. The obtained sterically stabilized multicompartment nanoobjects, with confined supercoiled plasmid DNA (pBDNF), are important in the context of multicompartment lipid nanocarriers of interest for gene therapy of neurodegenerative diseases.

  11. SAXS Study of Sterically Stabilized Lipid Nanocarriers Functionalized by DNA

    International Nuclear Information System (INIS)

    Angelov, Borislav; Filippov, Sergey; Štepánek, Petr; Angelova, Angelina; Lesieur, Sylviane; Karlsson, Göran; Terrill, Nick

    2012-01-01

    The structure of novel spontaneously self-assembled plasmid DNA/lipid complexes is investigated by means of synchrotron radiation small-angle X-ray scattering (SAXS) and Cryo-TEM imaging. Liquid crystalline (LC) hydrated lipid systems are prepared using the non-ionic lipids monoolein and DOPE-PEG 2000 and the cationic amphiphile CTAB. The employed plasmid DNA (pDNA) is encoding for the human protein brain-derived neurotrophic factor (BDNF). A coexistence of nanoparticulate objects with different LC inner organizations is established. A transition from bicontinuous membrane sponges, cubosome intermediates and unilamelar liposomes to multilamellar vesicles, functionalized by pDNA, is favoured upon binding and compaction of pBDNF onto the cationic PEGylated lipid nanocarriers. The obtained sterically stabilized multicompartment nanoobjects, with confined supercoiled plasmid DNA (pBDNF), are important in the context of multicompartment lipid nanocarriers of interest for gene therapy of neurodegenerative diseases.

  12. Electrochemical study of the AISI 409 ferritic stainless steel: passive film stability and pitting nucleation and growth

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Juliana Sarango de [Universidade Federal de São Paulo (UNIFESP), Diadema, SP (Brazil). Departamento de Ciências Exatas e da Terra; Oliveira, Leandro Antônio de; Antunes, Renato Altobelli, E-mail: renato.antunes@ufabc.edu.br [Universidade Federal do ABC (CECS/UFABC), Santo André, SP (Brazil). Centro de Engenharia, Modelagem e Ciências Sociais Aplicadas; Sayeg, Isaac Jamil [Universidade de São Paulo (USP), SP (Brazil). Instituto de Geociências

    2017-11-15

    The aim of the present work was to study the passive film stability and pitting corrosion behavior of the AISI 409 stainless steel. The electrochemical tests were carried out in 0.1 M NaCl solution at room temperature. The general electrochemical behavior was assessed using electrochemical impedance spectroscopy (EIS) measurements whereas the semiconducting properties of the passive film were evaluated by the Mott-Schottky approach. Pitting corrosion was investigated using potentiodynamic and potentiostatic polarization tests. Surface morphology was examined using confocal laser scanning microscopy and scanning electron microscopy (SEM). Energy dispersive X-ray spectroscopy (EDS) analyses were carried out to identify the composition of precipitates that could act as preferential sites for the onset of pitting corrosion. The results showed that the passive film presents n-type semiconductive behavior. Grain boundaries played an important role as pitting initiation sites for the AISI 409 stainless steel. (author)

  13. Electrochemical study of the AISI 409 ferritic stainless steel: passive film stability and pitting nucleation and growth

    International Nuclear Information System (INIS)

    Souza, Juliana Sarango de; Oliveira, Leandro Antônio de; Antunes, Renato Altobelli; Sayeg, Isaac Jamil

    2017-01-01

    The aim of the present work was to study the passive film stability and pitting corrosion behavior of the AISI 409 stainless steel. The electrochemical tests were carried out in 0.1 M NaCl solution at room temperature. The general electrochemical behavior was assessed using electrochemical impedance spectroscopy (EIS) measurements whereas the semiconducting properties of the passive film were evaluated by the Mott-Schottky approach. Pitting corrosion was investigated using potentiodynamic and potentiostatic polarization tests. Surface morphology was examined using confocal laser scanning microscopy and scanning electron microscopy (SEM). Energy dispersive X-ray spectroscopy (EDS) analyses were carried out to identify the composition of precipitates that could act as preferential sites for the onset of pitting corrosion. The results showed that the passive film presents n-type semiconductive behavior. Grain boundaries played an important role as pitting initiation sites for the AISI 409 stainless steel. (author)

  14. Life sciences payload definition and integration study. Volume 3: Preliminary equipment item specification catalog for the carry-on laboratories. [for Spacelab

    Science.gov (United States)

    1974-01-01

    All general purpose equipment items contained in the final carry-on laboratory (COL) design concepts are described in terms of specific requirements identified for COL use, hardware status, and technical parameters such as weight, volume, power, range, and precision. Estimated costs for each item are given, along with projected development times.

  15. 福清旅游环境承载力研究%Study on the Carrying Capacity of Fuqing Tourism Environment

    Institute of Scientific and Technical Information of China (English)

    姜玲

    2012-01-01

    The policy of developing the economic zone on the west side of Taiwan strait has created a good opportunity for the development of tourism in Fujian. Due to its favorable geographical location, Fuqing will definitely become the beneficiary of the development. A significant growth in tourism is foreseeable. This paper analyzes the carrying capacity of Fuqing ecological environment, carrying capacity of resources space, residents' psychological carrying capacity as well as economic carrying capacity so as to find out the comprehensive environment carrying capacity. The obstacles to the development of tourism in Fuqing have been identified and countermeasures were provided in the hope of promoting Fuqing tourism industry.%海西建设的提出为福建旅游业发展带来了良好的契机,福清由于其优越的地理位置,势必会成为海西建设的受益者,旅游业必将会得到迅猛的发展,在这种前提下,本文通过对福清市的生态环境承载力、资源空间承载力、居民心理承载力和经济承载力的定量分析,得出了福清市的综合环境承载力,从而找出制约福清旅游业发展的主要因素,在此基础上提出相应的对策建议,以此来促进福清旅游业的发展。

  16. Stability and change in adult personality over 6 years: findings from the Victoria Longitudinal Study.

    Science.gov (United States)

    Small, Brent J; Hertzog, Christopher; Hultsch, David F; Dixon, Roger A

    2003-05-01

    Data from the Victoria Longitudinal Study were used to examine the 6-year longitudinal stability of personality in older adults. Personality was measured with the NEO Personality Inventory. The longitudinal sample consisted of 223 adults initially ranging from 55 to 85 years of age. Longitudinal confirmatory factor analyses were used to examine the stability of individual differences in change over time, and the stability of the longitudinal factor structure. The results indicated both substantial stability at the level of individual differences in change, as well as significant individual differences in change that were related to age and gender. Finally, the factor structure of personality was invariant over time but did not approximate simple structure for the five dimensions of personality. Our study of 6-year personality development provided both (a). a confirmation of early significant stability findings and (b). unique evidence for significant individual differences in late adulthood.

  17. A study on the carrying capacity of the available habitat for the Rhinopithecus bieti population at Mt. Laojun in Yunnan, China.

    Science.gov (United States)

    Li, Li; Yu, Shixiao; Ren, Baoping; Li, Ming; Wu, Ruidong; Long, Yongcheng

    2009-06-01

    The Yunnan snub-nosed monkey is one of the most endangered primates in the world. It is experiencing a range of ongoing threats and the persisting effects of past disturbances. The prospects for this species are not very optimistic because habitat corridors are severely damaged by logging, grazing, and mining. Each group of the monkeys in different areas is facing a unique variety of threats. Based on genetic analysis, Rhinopithecus bieti should be separated into three management units for conservation, of which the Mt. Laojun management unit involves the most endangered primates. Despite the fact that the vegetation on Mt. Laojun is in a relatively pristine state, only two groups of monkeys, of a total of fewer than 300, survive in the area. With this paper, we aimed to address the capacity of the monkeys' habitat at the study site and the possible reasons for the small populations. Rapid ecological assessment based on a SPOT 5 image and field survey was used to simulate the vegetation of the whole area based on reference ecological factors of the GIS system. The vegetation map of the site was thus derived from this simulation. Based on the previous studies, the three vegetation types were identified as the suitable habitat of the monkeys. The confusion matrix-based field GPS points were applied to analyze the precision of the habitat map. Based on the map of suitable habitat of the monkeys, the utilization of the habitat and the carrying capacity were analyzed in the GIS. The confusion matrix-based field GPS points were applied to the habitat analysis process, and it was found that the habitat map was 81.3% precise. Then, with the current habitat map, we found that the mixed forest currently used by the monkeys is only a very small fraction (2.65%) of the overall potential habitat of the population, while the dark conifer forest is 4.09%. Poaching is the greatest short-term threat to this species, particularly in the southern range where local residents have a

  18. IN VIVO STUDIES AND STABILITY STUDY OF CLADOPHORA GLOMERATA EXTRACT AS A COSMETIC ACTIVE INGREDIENT.

    Science.gov (United States)

    Fabrowska, Joanna; Kapuscinska, Alicja; Leska, Boguslawa; Feliksik-Skrobich, Katarzyna; Nowak, Izabela

    2017-03-01

    Marine algae are widely used as cosmetics raw materials. Likewise, freshwater alga Cladophora glomerata may be a good source of fatty acids and others bioactive agents. The aims of this study was to find out if the addition of the extract from the freshwater C. glonerata affects the stability of prepared cosmetic emulsions and to investigate in vivo effects of the extract in cosmetic formulations on hydration and elasticity of human skin. Extract from the freshwater C. glonierata was obtained using supercritical fluid extraction (SFE). Two forms of O/W emulsions were prepared: placebo and emulsion containing 0.5% of Cladophora SFE extract. The stability of obtained emulsions was investigated by using Turbiscan Lab Expert. Emulsions were applied by .volunteers daily. Corneometer was used to evaluate skin hydration and cutometer to examine skin elasticity. Measurements were conducted at reference point (week 0) and after 1st, 2nd, 3rd and 4th week of application. The addition of Cladophora extract insignificantly affected stability of the emulsion. The extract from C. glomerata in the emulsion influenced the improvement of both skin hydration and its elasticity. Thus, freshwater C. glonierata extract prepared via SFE method may be considered as an effective cosmetic raw material used as a moisturizing and firming agent.

  19. Liquid Crystal Formation from Sunflower Oil: Long Term Stability Studies.

    Science.gov (United States)

    da Rocha-Filho, Pedro Alves; Maruno, Mônica; Ferrari, Márcio; Topan, José Fernando

    2016-06-09

    The Brazilian biodiversity offers a multiplicity of raw materials with great potential in cosmetics industry applications. Some vegetable oils and fatty esters increase skin hydration by occlusivity, keeping the skin hydrated and with a shiny appearance. Sunflower (Helianthus annus L.) oil is widely employed in cosmetic emulsions in the form of soaps, creams, moisturizers and skin cleansers due to the presence of polyphenols and its high vitamin E content. Liquid crystals are systems with many applications in both pharmaceutical and cosmetic formulations and are easily detected by microscopy under polarized light due to their birefringence properties. The aim of this research was to develop emulsions from natural sunflower oil for topical uses. Sunflower oil (75.0% w/w) was combined with liquid vaseline (25.0% w/w) employing a natural self-emulsifying base (SEB) derivative. The high temperature of the emulsification process did not influence the antioxidant properties of sunflower oil. Fatty esters were added to cosmetic formulations and extended stability tests were performed to characterize the emulsions. Fatty esters like cetyl palmitate and cetyl ester increase the formation of anisotropic structures. O/W emulsions showed acidic pH values and pseudoplastic behavior. The presence of a lamellar phase was observed after a period of 90 days under different storage conditions.

  20. Experimental study of the thermal stability of hydrocarbon fuels

    Science.gov (United States)

    Marteney, P. J.; Colket, M. B.; Vranos, A.

    1982-01-01

    The thermal stability of two hydrocarbon fuels (premium diesel and regular diesel) was determined in a flow reactor under conditions representing operation of an aircraft gas turbine engine. Temperature was varied from 300 to 750 F (422 to 672 K) for fuel flows of 2.84 to 56.8 liters/hr (corresponding to 6.84 x 0.00010 to 1.63 x 0.010 kg/sec for regular diesel fuel and 6.55 x 0.00010 to 1.37 x 0.010 kg/sec for premium diesel fuel); test times varied between 1 and 8 hr. The rate of deposition was obtained through measurement of weight gained by metal discs fixed along the channel wall. The rate of deposit formation is best correlated by an Arrhenius expression. The sample discs in the flow reactor were varied among stainless steel, aluminum and brass; fuels were doped with quinoline, indole, and benzoyl perioxide to yield nitrogen or oxygen concentrations of approximately 1000 ppm. The most substantial change in rate was an increase in deposits for brass discs; other disc materials or the additives caused only small perturbations. Tests were also conducted in a static reactor at temperatures of 300 to 800 F for times of 30 min to 2 1/2 hr. Much smaller deposition was found, indicating the importance of fluid transport in the mechanism.

  1. Synthesis and Stability of Iron Nanoparticles for Lunar Environment Studies

    Science.gov (United States)

    Hung, Ching-cheh; McNatt, Jeremiah

    2009-01-01

    Simulant of lunar dust is needed when researching the lunar environment. However, unlike the true lunar dust, today s simulants do not contain nanophase iron. Two different processes have been developed to fabricate nanophase iron to be used as part of the lunar dust simulant: (1) Sequentially treating a mixture of ferric chloride, fluorinated carbon, and soda lime glass beads at about 300 C in nitrogen, at room temperature in air, and then at 1050 C in nitrogen. The product includes glass beads that are grey in color, can be attracted by a magnet, and contain alpha-iron nanoparticles (which seem to slowly lose their lattice structure in ambient air during a period of 12 months). This product may have some similarity to the lunar glassy regolith that contains Fe(sup 0). (2) Heating a mixture of carbon black and a lunar simulant (a mixed metal oxide that includes iron oxide) at 1050 C in nitrogen. This process simulates lunar dust reaction to the carbon in a micrometeorite at the time of impact. The product contains a chemically modified simulant that can be attracted by a magnet and has a surface layer whose iron concentration increased during the reaction. The iron was found to be alpha-iron and Fe3O4 nanoparticles, which appear to grow after the fabrication process, but stabilizes after 6 months of ambient air storage.

  2. Summary of environmental study carried out by Bhabha Atomic Research Centre during 8th, 9th and 10th summer Indian expeditions to Antarctica

    International Nuclear Information System (INIS)

    Ramachandran, T.V.; Sathe, A.P.; Joshi, P.V.; Balani, M.C.

    1994-01-01

    The Bhabha Atomic Research Centre has participated in the 8th, 9th and 10th summer expeditions to Antarctica during 1988-91 period to carry out background radiation survey and to collect representative samples for radioactivity and heavy metal analyses. Spot measurements of ions as well as Radon daughter radionuclides were also carried out during the expeditions. Radon levels as well as heavy metal pollutant concentrations have been found to be quite low in general; however higher levels were observed at places where human activity is concentrated around the landing area as well as the laboratory site. The richness of the shelf waters at Antarctic were also realised through analysis of phytoplankton and zooplankton samples. (author). 25 refs., 5 figs., 26 tabs

  3. 长治湿地公园生态旅游环境容量研究%Study on the Ecotourism Carrying Capacity of Changzhi Wetland Park

    Institute of Scientific and Technical Information of China (English)

    宋珂; 樊正球; 信欣; 王新军; 王原

    2011-01-01

    生态旅游环境容量作为衡量旅游环境与旅游发展是否协调的重要尺度,为旅游的可持续发展提供了较为客观的判断依据.从长治湿地公园自身的承受能力出发,综合旅游生态容量(Ce)与旅游空间容量(Cs)两方面因素评估区域的生态旅游环境容量(其中Ce为40 632~52 366(人次/d),Cs为28 872~55 376(人次/d),对长治湿地公园的规划建设和管理提出3个不同的情景方案.%Ecotourism carrying capacity is a standard to measure the coordination between tourism environment and tourism development.It provides a basis judgment for the sustainable development of tourism.Based on the analyses of the ecological environmental carrying capacity(Ce)and the ecological spatial carrying capacity(Cs),an integrated estimation on the carrying capacity of Changzhi Wetland Park was made(In which Ce is 40632—52366 passengers/day,Cs is 28872—55376 passengers/day).Finally,three scenario programs were put forward,which could be of practical and instructive significances in the planning and management of this wetland park.

  4. A study on boiling water reactor regional stability from the viewpoint of higher harmonics

    International Nuclear Information System (INIS)

    Takeuchi, Yutaka; Takigawa, Yukio; Uematsu, Hitoshi

    1994-01-01

    A quantitative study on a mechanism for boiling water reactor regional stability has been carried out from the viewpoint of higher harmonics. In the mechanism, the gain decrease in the void-to-power transfer function can be explained by the higher harmonics mode subcriticality. It is shown that the thermal-hydraulic feedback effect can compensate for the gain decrease, and regional oscillation can be sustained that way. For quantitative evaluations, a three-dimensional higher harmonics analysis model has been developed. The results show that the first azimuthal harmonics subcriticality has a relatively small value under a regionally unstable condition. Comparing the subcriticality and the steady-state power distribution, it is shown that the distribution exists whose first azimuthal harmonics subcriticality takes a small value. A method of decomposition for the oscillated power responses into the harmonics modes is presented. The results show that the corewide oscillation power response consists almost entirely of the fundamental mode, and the regional oscillation power response consists almost entirely of the first azimuthal harmonics mode. This indicates that regional oscillation is a phenomenon in which the first azimuthal harmonics mode oscillates on the basis of the fundamental mode

  5. STUDY ON THE POLYMERIZATION KINETICS AND STABILITY OF P(UA)/MMA MICROEMULSION

    Institute of Scientific and Technical Information of China (English)

    Hong-tao Zhang; Tian-bin Ren; Zhao-hui Yin

    2001-01-01

    Urethane acrylate anionomer (APUA) as a kind of new type polymerizable emulsifier was synthesized using 2,4-toluene diisocyanate (TDI), polypropylene glycol (PPG), 2-hydroxyethyl methacrylate (HEMA) and dimethylolpropionic acid (DMPA). The critical micelle concentration (CMC) of APUA was measured by the methods of conductance and surface tension. The comparative studies between polymerizable emulsifier AUPA and conventional emulsifier sodium dodecyl sulfate (SDS) were carried out in the emulsion polymerization of methyl methacrylate (MMA). Polymerization kinetics,stability, size and morphology of the latex particles were investigated. It was found that in APUA both water soluble initiator potassium persulfate (KPS) and oil soluble initiator 2,2'-azobisisobutyronitrile (AIBN) can start the reaction of MMA, and the polymerization rate and yield were very high. On using AIBN as an initiator, the conversion-time behavior of MMA with APUA as emulsifier was different to that of SDS as emulsifier, signifying a different nucleation mechanism of the polymer latex particle. The average size of the two kinds of particles is about 50 nm. The particle size decreases with increasing emulsifier concentration. On using KPS as the initiator, APUA as emulsifier, cross-linking hydrogel of PMMA would be formed, but SDS was used as emulsifier and the hydrogel of PMMA was not present.

  6. [Study on relationship between emotional stability in flight and nerve system excitability].

    Science.gov (United States)

    Liu, Fang; Huang, Wei-fen; Jing, Xiao-lu; Zhang, Ping

    2003-06-01

    To study the related factors of emotional stability in flight. Based on the operable definition of emotional stability in flight and the related literature review, 63 experienced pilots and flight coaches were investigated and the other-rating questionnaire of emotional stability in flight was established. To test the senior nerve system, Uchida Kraeplin (UK) test was administrated on 153 19-21 years old male student pilots of the second grade in the department of flight technique in China Civil Aviation College, who were selected through 13 h flight, 35 h solo flight, and acted as the standardization group. In the end, the correlation was explored between the testing results and their emotional behavioral characteristics in flight. Significant positive correlation was found between emotional feature indexes of emotional stability in flight and excitability in UK test. The excitability in UK test are good predictors for emotional stability in flight.

  7. Stabilization of liquid low-level and mixed wastes: a treatability study

    International Nuclear Information System (INIS)

    Carson, S.; Cheng, Yu-Cheng; Yellowhorse, L.; Peterson, P.

    1996-01-01

    A treatability study has been conducted on liquid low-level and mixed wastes using the stabilization agents Aquaset, Aquaset II, Aquaset II-H, Petroset, Petroset-H, and Petroset and Petroset II. A total of 40 different waste types with activities ranging from 10 -14 to 10 -4 curies/ml have been stabilized. Reported data for each waste include its chemical and radiological composition and the optimum composition or range of compositions (weight of agent/volume of waste) for each stabilization agent used. All wastes were successfully stabilized with one or more of the stabilization agents and all final waste forms passed the Paint Filter Liquids Test (EPA Method 9095)

  8. Cervical stability training with and without core stability training for patients with cervical disc herniation: A randomized, single-blind study.

    Science.gov (United States)

    Buyukturan, B; Guclu-Gunduz, A; Buyukturan, O; Dadali, Y; Bilgin, S; Kurt, E E

    2017-11-01

    This study aims at evaluating and comparing the effects of cervical stability training to combined cervical and core stability training in patients with neck pain and cervical disc herniation. Fifty patients with neck pain and cervical disc herniation were included in the study, randomly divided into two groups as cervical stability and cervical-core stability. Training was applied three times a week in three phases, and lasted for a total duration of 8 weeks. Pain, activation and static endurance of deep cervical flexor muscles, static endurance of neck muscles, cross-sectional diameter of M. Longus Colli, static endurance of trunk muscles, disability and kinesiophobia were assessed. Pain, activation and static endurance of deep cervical flexors, static endurance of neck muscles, cross-sectional diameter of M. Longus Colli, static endurance of trunk muscles, disability and kinesiophobia improved in both groups following the training sessions (p training methods revealed that the cervical stability group produced a greater increase in the right transverse diameter of M. Longus Colli (p training provided benefit to patients with cervical disc herniation. The addition of core stability training did not provide any additional significant benefit. Further research is required to investigate the efficacy of combining other techniques with cervical stability training in patients with cervical disc herniation. Both cervical stability training and its combination with core stability training were significantly and similarly effective on neck pain and neck muscle endurance in patients with cervical disc herniation. © 2017 European Pain Federation - EFIC®.

  9. Frontal plane stability following UKA in a biomechanical study.

    Science.gov (United States)

    Heyse, Thomas J; Tucker, Scott M; Rajak, Yogesh; Kia, Mohammad; Lipman, Joseph D; Imhauser, Carl W; Westrich, Geoffrey H

    2015-06-01

    Function and kinematics following unicondylar knee arthroplasty (UKA) have been reported to be close to the native knee. Gait, stair climbing and activities of daily living expose the knee joint to a combination of varus and valgus moments. Replacement of the medial compartment via UKA is likely to change the physiologic knee stability and its ability to respond to varus and valgus moments. It was hypothesized that UKA implantation would stiffen the knee and decrease range of motion in the frontal plane. Six fresh frozen cadaver knees were prepared and mounted in a six-degrees-of-freedom robot. An axial load of 200 N was applied with the knee in 15°, 45° and 90° of flexion. Varus and valgus moments were added, respectively, before and after implantation of medial UKA. Tests were than redone with a thicker polyethylene inlay to simulate overstuffing of the medial compartment. Range of motion in the frontal plane and the tibial response to moments were recorded via the industrial robot. The range of motion in the frontal plane was decreased with both, balanced and overstuffed UKA and shifted towards valgus. When exposed to valgus moments, knees following UKA were stiffer in comparison with the native knee. The effect was even more pronounced with medial overstuffing. In UKA, the compressive anatomy is replaced by much stiffer components. This lack of medial compression and relative overstuffing leads to a tighter medial collateral ligament. This drives the trend towards a stiffer joint as documented by a decrease in frontal plane range of motion. Overstuffing should strictly be avoided when performing UKA.

  10. Equilibrium and stability studies for an iron-core tokamak with a poloidal divertor

    International Nuclear Information System (INIS)

    Solano, E.R.; Neilson, G.H.; Lao, L.L.

    1989-01-01

    A study of plasma equilibrium and stability in a tokamak with an unsaturated iron core is presented. A spool model is developed for the iron. Both, a simplified force balance code and a Grad-Shafranov solver are used to study the plasma equilibrium. It is observed that the iron can strongly modify the conditions for equilibrium and stability, and in some cases an infinite cylinder model for the iron core is not adequate. New criteria for plasma position stability in the presence of an iron core are introduced. 17 refs., 4 figs., 3 tabs

  11. Stability and change in alcohol habits of different socio-demographic subgroups--a cohort study.

    Science.gov (United States)

    Sydén, Lovisa; Wennberg, Peter; Forsell, Yvonne; Romelsjö, Anders

    2014-05-29

    Stability in alcohol habits varies over time and in subgroups, but there are few longitudinal studies assessing stability in alcohol habits by socio-demographic subgroups and potential predictors of stability and change. The aim was to study stability and change in alcohol habits by sex, age, and socio-economic position (SEP). Data derived from two longitudinal population based studies in Sweden; the PART study comprising 19 457 individuals aged 20-64 years in 1998-2000, and the Stockholm Public Health Cohort (SPHC) with 50 067 individuals aged 18-84 years in 2002. Both cohorts were followed-up twice; PART 2000-2003 and 2010, and SPHC 2007 and 2010. Alcohol habits were measured with the Alcohol Use Disorders Identification Test (AUDIT), and with normal weekly alcohol consumption (NWAC). Stability in alcohol habits was measured with intraclass correlation. Odds ratios were estimated in multinomial logistic regression analysis to predict stability in alcohol habits. For the two drinking measures there were no consistent patterns of stability in alcohol habits by sex or educational level. The stability was higher for older age groups and self-employed women. To be a man aged 30-39 at baseline predicted both increase and decrease in alcohol habits. The findings illustrate higher stability in alcohol habits with increasing age and among self-employed women with risky alcohol habits. To be a man and the age 30-39 predicted change in alcohol habits. No conclusive pattern of socio-economic position as predictor of change in alcohol habits was found and other studies of potential predictors seem warranted.

  12. The stability study of myristyl dimethyl amine oxide as an amphoteric ...

    African Journals Online (AJOL)

    The stability study of myristyl dimethyl amine oxide as an amphoteric surfactant in strong oxidant media containing 5 % m/m sodium hypochlorite through measurement of decomposing rate using high performance liquid chromatography and two phase titration.

  13. Gaze stabilization reflexes in the mouse: New tools to study vision and sensorimotor

    NARCIS (Netherlands)

    B. van Alphen (Bart)

    2010-01-01

    markdownabstract__abstract__ Gaze stabilization reflexes are a popular model system in neuroscience for connecting neurophysiology and behavior as well as studying the neural correlates of behavioral plasticity. These compensatory eye movements are one of the simplest motor behaviors,

  14. Preliminary study on peroxidase isoenzyme detection and RAPD molecular verification for sweet pepper 87-2 carried by a recoverable satellite

    International Nuclear Information System (INIS)

    Liu Min; Li Jinguo; Wang Yalin; Zhang Zan; Xue Huai; Zhang Chunhua; Li Sherong

    1999-01-01

    The detection technology of peroxidase isoenzyme pattern and RAPD (Randomly Amplified Polymorphic DNA) analysis were used to space-flown sweet pepper variety of 87-2 carried by a recoverable satellite, and its correspondent ground control Longjiao-2. Determination of peroxidase isoenzyme revealed that the physiological activities of space-flown sweet pepper were significantly higher than those of its ground control. To detect the polymorphism of gene sequence and the difference in molecular level. 42 primers were used, among them, 38 primers amplified polymorphic products, and the amplified products from 5 primers of sweet pepper 87-2 differed from those of ground control

  15. Quality control and stability study of 100 mg/ml paracetamol oral drops

    International Nuclear Information System (INIS)

    Garcia Penna, Caridad M.; Montes de Oca Porto, Yanet; Salomon Izquierdo, Suslebys

    2013-01-01

    Paracetamol is an effective analgesic and antipyretic drug of the non-steroidal anti-inflammatory drug group. Paracetamol oral drops are indicated for use in infant population aged up to 5 years to relieve fever, headache, toothache and symptomatic relief of common cold. To validate two analytical methods for the quality control and the stability study and to study the stability of 100 mg/ml Paracetamol oral drops made in Cuba

  16. Study of the Rancimat test method in measuring the oxidation stability of biodiesel ester and blends

    Energy Technology Data Exchange (ETDEWEB)

    Berthiaume, D.; Tremblay, A. [Oleotek Inc., Thetford Mines, PQ (Canada)

    2006-11-15

    This paper provided details of a study conducted to examine the oxidation stability of biodiesel blends. The study tested samples of canola oil, soybean oil, fish oil, yellow grease, and tallow. The EN 14112 (Rancimat) method was used to compare oxidation stability results obtained in previous tests conducted in the United States and Europe. The aim of the study was also to evaluate the influence of peroxide value (PV), acid value (AV) and feedstock source on the the oxidative stability of different samples. The study also evaluated the possibility of developing a validated test method developed from the EN 14112 methods to specifically consider biodiesel blends. Results of the study indicated that the Rancimat method was not suitable for measuring the oxidation stability of biodiesels blended with petrodiesels. No direct correlation between oxidative stability and PV or AV was observed. It was concluded that fatty acid distribution was not a principal factor in causing changes in oxidation stability. 22 refs., 3 tabs., 1 fig.

  17. Recent studies of heavy nuclei far from stability at JYFL

    Energy Technology Data Exchange (ETDEWEB)

    Julin, R.; Enqvist, T.; Helariutta, K. [Univ. of Jyvaeskylae (Finland)] [and others

    1996-12-31

    The new K=130 Cyclotron + ECR facility of the Physics Department of the University of Jyvaskyla (JYFL) provides stable beams from protons up to krypton ions for nuclear structure studies. Two instruments designed especially for in-beam spectroscopic studies of heavy nuclei at JYFL are introduced in this contribution. Some results from recent measurements with them are reported.

  18. Equilibrium and stability studies for high beta plasmas in torsatron/heliotron devices

    International Nuclear Information System (INIS)

    Carreras, B.A.; Cooper, W.A.; Charlton, L.A.

    1983-01-01

    The equilibrium and stability properties of high β plasmas in torsatron/heliotron devices have been investigated. Three numerical approaches have been used to study plasma equilibria for a range of coil configurations. The method of averaging permits fast equilibrium and stability calculations. Two fully 3-D codes, namely the Chodura-Schluter code, and the NEAR code recently developed at ORNL, are used to explore selected regions of parameter space. The resulting equilibria calculated with different methods are in good agreement. This validates the average method approach and enhances its usefulness. Results are presented for configurations with different aspect ratios and number of field periods. The role of the vertical field has also been studied in detail. The main conclusion is that for moderate aspect ratios (Asub(p) <= 8), the self-stabilizing effect of the magnetic axis shift is large enough to open a direct path to the second stability regime. (author)

  19. Equilibrium and stability studies for high-beta plasmas in torsatron/heliotron devices

    International Nuclear Information System (INIS)

    Carreras, B.A.; Charlton, L.A.; Cooper, W.A.

    1983-01-01

    The equilibrium and stability properties of high-#betta# plasmas in torsatron/heliotron devices have been investigated. Three numerical approaches have been used to study plasma equilibria for a range of coil configurations. The method of averaging permits fast equilibrium and stability calculations. Two fully 3-D codes, namely the Chodura-Schluter code, and the NEAR code recently developed at ORNL, are used to explore selected regions of parameter space. The resulting equilibria calculated with different methods are in good agreement. This validates the average method approach and enhances its usefulness. Results are presented for configurations with different aspect ratios and number of field periods. The role of the vertical field has also been studied in detail. The main conclusion is that for moderate aspect ratios (A/sub p/ less than or equal to 8), the self-stabilizing effect of the magnetic-axis shift is large enough to open a direct path to the second-stability regime

  20. Models and impact of patient and public involvement in studies carried out by the Medical Research Council Clinical Trials Unit at University College London: findings from ten case studies.

    Science.gov (United States)

    South, Annabelle; Hanley, Bec; Gafos, Mitzy; Cromarty, Ben; Stephens, Richard; Sturgeon, Kate; Scott, Karen; Cragg, William J; Tweed, Conor D; Teera, Jacqueline; Vale, Claire L

    2016-07-29

    Patient and public involvement (PPI) in studies carried out by the UK Medical Research Council Clinical Trials Unit (MRC CTU) at University College London varies by research type and setting. We developed a series of case studies of PPI to document and share good practice. We used purposive sampling to identify studies representing the scope of research at the MRC CTU and different approaches to PPI. We carried out semi-structured interviews with staff and patient representatives. Interview notes were analysed descriptively to categorise the main aims and motivations for involvement; activities undertaken; their impact on the studies and lessons learned. We conducted 19 interviews about ten case studies, comprising one systematic review, one observational study and 8 randomised controlled trials in HIV and cancer. Studies were either open or completed, with start dates between 2003 and 2011. Interviews took place between March and November 2014 and were updated in summer 2015 where there had been significant developments in the study (i.e. if the study had presented results subsequent to the interview taking place). A wide range of PPI models, including representation on trial committees or management groups, community engagement, one-off task-focused activities, patient research partners and participant involvement had been used. Overall, interviewees felt that PPI had a positive impact, leading to improvements, for example in the research question; study design; communication with potential participants; study recruitment; confidence to carry out or complete a study; interpretation and communication of results; and influence on future research. A range of models of PPI can benefit clinical studies. Researchers should consider different approaches to PPI, based on the desired impact and the people they want to involve. Use of multiple models may increase the potential impacts of PPI in clinical research.

  1. Development and stability studies of sunscreen cream formulations containing three photo-protective filters

    OpenAIRE

    Smaoui, Slim; Ben Hlima, Hajer; Ben Chobba, Ines; Kadri, Adel

    2013-01-01

    The present study aimed to formulate and subsequently evaluate sunscreen cream (W/O/W emulsion) containing three photo-protective filters: benzophenone-3, ethylhexyl methoxycinnamate and titanium dioxide at different percentages. Formulations were stored at 8, 25 and 40 °C for four weeks to investigate their stability. Color, centrifugation, liquefaction, phase separation, pH and Sun Protection Factor (SPF) of sunscreen cream formulations were determined. The microbiological stability of the ...

  2. Theoretical study of fractal growth and stability on surface

    DEFF Research Database (Denmark)

    Dick, Veronika V.; Solov'yov, Ilia; Solov'yov, Andrey V.

    2009-01-01

    We perform a theoretical study of the fractal growing process on surface by using the deposition, diffusion, aggregation method. We present a detailed analysis of the post-growth processes occurring in a nanofractal on surface. For this study we developed a method which describes the internal...... dynamics of particles in a fractal and accounts for their diffusion and detachment. We demonstrate that these kinetic processes are responsible for the formation of the final shape of the islands on surface after the post-growth relaxation....

  3. Study of nuclear power plant stability. Trip criteria

    International Nuclear Information System (INIS)

    Beato Castro, D.; Iturbe Uriarte, R.; Wilhelmi Ayza, J.R.

    1993-01-01

    The influence that nuclear power plants and high voltage power systems have on each other when confronted by disturbances in the offsite network may lead, due to dynamic effects, to plant trip. It is therefore necessary to study the disturbances in the network and the effects on plant equipment by means of dynamic simulations which evaluate the unit protection system and the auxiliary services so as to obtain maximum unit availability without jeopardizing its safety. These studies can be conducted since there are models and software tools capable of simulating dynamic behaviour of the electric system, including the excitation systems and specific speed governors obtainment of valid. (author)

  4. Laboratory study on subgrade soil stabilization using RBI grade 81

    Science.gov (United States)

    Cynthia, J. Bernadette; Kamalambikai, B.; Prasanna Kumar, R.; Dharini, K.

    2017-07-01

    The present study investigates the effect of reinforcing the sub grade soils with RBI 81 material. A soil nearby was collected and preliminary tests were conducted to classify the soil and it was found from the results that the sample collected was a poorly graded clay. Subsequently Tests such as Proctor Compaction, CBR, and UCC were conducted to study the various engineering properties of the identified soil. In addition to the above tests were also conducted on the soil by reinforcing with varying percentages of RBI 81. From the analysis of test results it was found that this material (RBI 81) will significantly improve the CBR value of the soil.

  5. A Study of the Lateral Stability of Self-Propelled Fruit Harvesters

    Directory of Open Access Journals (Sweden)

    Maurizio Cutini

    2017-11-01

    Full Text Available Self-propelled fruit harvesters (SPFHs are agricultural machines designed to facilitate fruit picking and other tasks requiring operators to stay close to the foliage or to the upper part of the canopy. They generally consist of a chassis with a variable height working platform that can be equipped with lateral extending platforms. The positioning of additional masses (operators, fruit bins and the maximum height of the platform (up to three meters above the ground strongly affect machine stability. Since there are no specific studies on the lateral stability of SPFHs, this study aimed to develop a specific test procedure to fill this gap. A survey of the Italian market found 20 firms manufacturing 110 different models of vehicles. Observation and monitoring of SPFHs under real operational conditions revealed the variables mostly likely to affect lateral stability: the position and mass of the operators and the fruit bin on the platform. Two SPFHs were tested in the laboratory to determine their centre of gravity and lateral stability in four different settings reproducing operational conditions. The test setting was found to affect the stability angle. Lastly, the study identified two specific settings reproducing real operational conditions most likely to affect the lateral stability of SPFHs: these should be used as standard, reproducible settings to enable a comparison of results.

  6. thermodynamic stability of hydrogen-bonded nanostructures: a calorimetric study

    NARCIS (Netherlands)

    ten Cate, M.G.J.; Huskens, Jurriaan; Crego Calama, Mercedes; Reinhoudt, David

    2004-01-01

    The self-assembly of hydrogen-bonded aggregates (rosettes) in solvent mixtures of different polarity has been studied by calorimetry. The C50 parameter, the concentration when 50 % of the components are incorporated in the assembly, is used to compare assemblies with different stoichiometry. C50 for

  7. Thermal stability of thiophene biomarkers as studied by hydrous pyrolysis

    NARCIS (Netherlands)

    Sinninghe Damsté, J.S.; Koopmans, M.P.; Lewan, M.D.; Leeuw, J.W. de

    1995-01-01

    An immature (Ro = 0.25%) sulphur-rich calcareous shale from the Gessoso-solfifera Formation (Messinian) in the Vena del Gesso Basin (northern Italy) was artificially matured by hydrous pyrolysis at constant temperatures ranging from 160 to 330°C for 72 h to study the applicability of alkylthiophenes

  8. Adolescent Ethnolinguistic Stability and Change: A Longitudinal Study

    Science.gov (United States)

    Kohn, Mary Elizabeth

    2013-01-01

    Most sociolinguistic studies rely on apparent time, cross-sectional methods to analyze language change. On the basis of apparent time data, sociolinguists have hypothesized that cultural processes of lifespan change create predictable cycles of linguistic behavior in which adolescents lead in the use of vernacular variants and advance sound change…

  9. Fundamental Studies of Fluid Mechanics: Stability in Porous Media

    Energy Technology Data Exchange (ETDEWEB)

    Homsy, George M. [Univ. of California, Santa Barbara, CA (United States). Department of Mechanical and Environmental Engineering

    2014-02-12

    We summarize our research results in three main areas: coating flows; electrohydrodynamics of drops; and wetting and spreading of drops. Experimental, computational and analytical methods are used to address a variety of issues. Coating flow studies include the effect of roughness, surfactants, and adsorbed particles on the dynamics of dip-coating. Electrohydrodynamic studies include drop deformation in uniform electric fields, shape distortion due to charge convection in sedimenting drops, and driving chaotic advection by either an electric field inclined to the direction of drop motion or time-periodic changes in the direction of the electric field. Heat and mass transport from chaotically mixed droplets exhibit unexpected and remarkable increases in the rates of transport. Finally, we develop an analytical solution to the problem of a static droplet, and use numerical techniques to predict its migration due to surface tension gradients.

  10. Stability Study of Anthropomorphic Robot Antares under External Load Action

    Science.gov (United States)

    Kodyakov, A. S.; Pavlyuk, N. A.; Budkov, V. Yu; Prakapovich, R. A.

    2017-01-01

    The paper presents the study of the behavior of the major structural elements of the lower limbs of anthropomorphic robot Antares under the influence of different types of loads (torsion, fracture). We have determined the required values for actuators torques for motion of the robot in space. The maximum values of torques are 5 Nm and 5.2 Nm respectively, and are able to withstand the upper and lower leg structures.

  11. Study of a region on yeast chromosome XIII that complements pet G199 mutants (COX7 and carries a new non-essential gene

    Directory of Open Access Journals (Sweden)

    M.P. Nobrega

    1998-03-01

    Full Text Available The mutants of Saccharomyces cerevisiae assigned to complementation group G199 are deficient in mitochondrial respiration and lack a functional cytochrome oxidase complex. Recombinant plasmids capable of restoring respiration were cloned by transformation of mutants of this group with a yeast genomic library. Sequencing indicated that a 2.1-kb subclone encompasses the very end (last 11 amino acids of the PET111 gene, the COX7 gene and a new gene (YMR255W of unknown function that potentially codes for a polypeptide of 188 amino acids (about 21.5 kDa without significant homology to any known protein. We have shown that the respiratory defect corresponding to group G199 is complemented by plasmids carrying only the COX7 gene. The gene YMR255W was inactivated by one-step gene replacement and the disrupted strain was viable and unaffected in its ability to grow in a variety of different test media such as minimal or complete media using eight distinct carbon sources at three pH values and temperatures. Inactivation of this gene also did not affect mating or sporulation

  12. A simple extension of contraction theory to study incremental stability properties

    DEFF Research Database (Denmark)

    Jouffroy, Jerome

    Contraction theory is a recent tool enabling to study the stability of nonlinear systems trajectories with respect to one another, and therefore belongs to the class of incremental stability methods. In this paper, we extend the original definition of contraction theory to incorporate...... in an explicit manner the control input of the considered system. Such an extension, called universal contraction, is quite analogous in spirit to the well-known Input-to-State Stability (ISS). It serves as a simple formulation of incremental ISS, external stability, and detectability in a differential setting....... The hierarchical combination result of contraction theory is restated in this framework, and a differential small-gain theorem is derived from results already available in Lyapunov theory....

  13. Relative stability of radicals derived from artemisinin: A semiempirical and DFT study

    Science.gov (United States)

    Arantes, C.; de Araujo, M. T.; Taranto, A. G.; de M. Carneiro, J. W.

    The semiempirical AM1 and PM3 methods, as well as the density functional (DFT/B3LYP) approach using the 6-31g(d) basis set, were employed to calculate the relative stability of intermediate radicals derived from artemisinin, a sesquiterpene lactone having an endoperoxide bridge that is essential for its antimalarial activity. The compounds studied have their nonperoxidic oxygen atom of the trioxane ring and/or the carbonyl group replaced by a CH2 unit. Relative stabilities were calculated by means of isodesmic equations using artemisinin as reference. It was found that replacement of oxygen atoms decreases the relative stability of the anionic radical intermediates. In contrast, for compounds with inverted stereochemistry the intermediate radicals were found to be more stable than those with the artemisinin-like stereochemistry. These relative stabilities may modulate the antimalarial potency. Radicals centered on carbon are always more stable than the corresponding radicals centered on oxygen.

  14. Study of Stability of Rotational Motion of Spacecraft with Canonical Variables

    Directory of Open Access Journals (Sweden)

    William Reis Silva

    2012-01-01

    Full Text Available This work aims to analyze the stability of the rotational motion of artificial satellites in circular orbit with the influence of gravity gradient torque, using the Andoyer variables. The used method in this paper to analyze stability is the Kovalev-Savchenko theorem. This method requires the reduction of the Hamiltonian in its normal form up to fourth order by means of canonical transformations around equilibrium points. The coefficients of the normal Hamiltonian are indispensable in the study of nonlinear stability of its equilibrium points according to the three established conditions in the theorem. Some physical and orbital data of real satellites were used in the numerical simulations. In comparison with previous work, the results show a greater number of equilibrium points and an optimization in the algorithm to determine the normal form and stability analysis. The results of this paper can directly contribute in maintaining the attitude of artificial satellites.

  15. Status of a study of stabilization and fine positioning of CLIC quadrupoles to the nanometre level

    CERN Document Server

    Artoos, K; Esposito, M; Fernandez Carmona, P; Guinchard, M; Hauviller, C; Janssens, S; Kuzmin, A; Leuxe, R; Moron Ballester, R

    2011-01-01

    Mechanical stability to the nanometre and below is required for the Compact Linear Collider (CLIC) quadrupoles to frequencies as low as 1 Hz. An active stabilization and positioning system based on very stiff piezo electric actuators and inertial reference masses is under study for the Main Beam Quadrupoles (MBQ). The stiff support was selected for robustness against direct forces and for the option of incrementally repositioning the magnet with nanometre resolution. The technical feasibility was demonstrated by a representative test mass being stabilized and repositioned to the required level in the vertical and lateral direction. Technical issues were identified and the development programme of the support, sensors, and controller was continued to increase the performance, integrate the system in the overall controller, adapt to the accelerator environment, and reduce costs. The improvements are implemented in models, test benches, and design of the first stabilized prototype CLIC magnet. The characterizati...

  16. DFT study of stabilization effects on N-doped graphene for ORR catalysis

    DEFF Research Database (Denmark)

    Reda, Mateusz; Hansen, Heine Anton; Vegge, Tejs

    2018-01-01

    Noble metal free catalysts, such as N-doped graphene, have drawn a lot of attention as a promising replacement for platinum in low temperature fuel cells. Computational prediction of catalytic activity requires accurate description of the oxygen reduction reaction (ORR) intermediates adsorption...... energies. Two stabilizing effects, immanently present in experimental ORR setups with basal plane N-doped graphene catalyst, are studied systematically by means of density functional theory. Distant nitrogen with no adsorbates on neighboring carbon atoms selectively stabilizes *O and *O2 adsorbates. Water...... solvation stabilizes all ORR intermediates, having a greater impact on *O and *O2, than on *OH and *OOH, in contrast to metal and oxide catalysts. Synergistic stabilization of *O caused by both effects reaches remarkably a high value of 1.5 eV for nitrogen concentrations above 4.2% N. Such a strong effect...

  17. Theoretical studying the stability of steady-state regime of a channel with a coolant condensation

    International Nuclear Information System (INIS)

    Savikhin, O.G.

    1987-01-01

    Based on the boiling channel stability theory, the channel steady-state stability with the coolant condensation is studied. Condensable coolants are used in the NPP steam-separator superheaters as well as in cryogenic technique. Under certain conditions the coolant flow rate and temperature fluctuations may be excited in the parallel channel system with coolant condensation, which produce a sufficient effect on the heat exchange equipment operation reliability. To describe unsteady processes of heat and mass transfer in the channel, a homogeneous two-phase flow one dimensional model is used. The results obtained allow one to make a conclusion concerning the effect of some parameters on condensing channel steady-state regime stability: reduction of inlet and outlet unheated communication length, pressure drop increase at the outlet plate and its reduction at the inlet one lead to the increase of stability margin

  18. Chemical stability study of vitamins thiamine, riboflavin, pyridoxine and ascorbic acid in parenteral nutrition for neonatal use

    Science.gov (United States)

    2011-01-01

    Background The objective of this work was to study the vitamins B1, B2, B6 and C stability in a pediatric formulation containing high amounts of calcium in the presence of organic phosphate, amino acids, glucose, sodium chloride, magnesium sulfate, pediatric vitamins and trace elements under different conditions using developed and validated analytical methods. Methods The study was carried out during 72 h with formulations packaged in recommended storage temperature (4°C) and 25°C, with and without photoprotection. Results The results showed that the methodologies used for assessing the chemical stability of vitamins B1, B2, B6 and C in the formulation were selective, linear, precise and accurate. The vitamins could be considered stable in the formulation during the three days of study if stored at 4°C. When stored at 25°C vitamin C presented instability after 48 h. Conclusion The pediatric formulation containing high amount of calcium in the presence of organic phosphate, amino acids, glucose, sodium chloride, magnesium sulphate, pediatric vitamins and trace elements packaged in bag-type trilaminate presented a shelf life of the 72 h, when maintained under refrigeration, between 2°C and 8°C. This shelf life was measured considering the vitamins studied. Further studies are needed including all the vitamins present in this formulation. PMID:21569609

  19. Chemical stability study of vitamins thiamine, riboflavin, pyridoxine and ascorbic acid in parenteral nutrition for neonatal use

    Directory of Open Access Journals (Sweden)

    Cabral Lúcio M

    2011-05-01

    Full Text Available Abstract Background The objective of this work was to study the vitamins B1, B2, B6 and C stability in a pediatric formulation containing high amounts of calcium in the presence of organic phosphate, amino acids, glucose, sodium chloride, magnesium sulfate, pediatric vitamins and trace elements under different conditions using developed and validated analytical methods. Methods The study was carried out during 72 h with formulations packaged in recommended storage temperature (4°C and 25°C, with and without photoprotection. Results The results showed that the methodologies used for assessing the chemical stability of vitamins B1, B2, B6 and C in the formulation were selective, linear, precise and accurate. The vitamins could be considered stable in the formulation during the three days of study if stored at 4°C. When stored at 25°C vitamin C presented instability after 48 h. Conclusion The pediatric formulation containing high amount of calcium in the presence of organic phosphate, amino acids, glucose, sodium chloride, magnesium sulphate, pediatric vitamins and trace elements packaged in bag-type trilaminate presented a shelf life of the 72 h, when maintained under refrigeration, between 2°C and 8°C. This shelf life was measured considering the vitamins studied. Further studies are needed including all the vitamins present in this formulation.

  20. Lifetime of Bentonites study: hydrothermal stability of saponites; Estudio de longevidad en bentonitas: estabilidad hidrotermal de saponitas

    Energy Technology Data Exchange (ETDEWEB)

    Leguey, S; Cuevas, J; Garralon, A [Universidad Autonoma de Madrid, Facultad de Ciencias, Departamento de Quimica Agricola, Geologia y Geoquimica, Madrid (Spain)

    1996-10-01

    The report studies the lifetime of bentonite and the hydrothermal stability of saponites. The testing comprised determination of physical and chemical properties of clays, the stability of the mineral porosity, lifetime and the wall of clay.

  1. Comparative study of gum arabic and PVP as stabilizing agents for synthesis of gold nanoparticles

    International Nuclear Information System (INIS)

    Silva, Andressa A.; Leal, Jessica; Geraldes, Adriana N.; Lugao, Ademar B.

    2015-01-01

    Use Colloidal metallic nanoparticles such as gold nanoparticles have received a great attention, due in part to their specific properties and potential applications. Control of size and uniformity of nanoparticles is important to prevent aggregation. High-molecular-weight polymers were used as stabilizer agents. Natural polymers, such as gum Arabic, are used as stabilizer because of capping nanoparticles behavior and present advantages such as solubility, non- toxicity and its compatibility for pharmaceutical and biomedical applications. Previous studies showed that the hydrophilic group of Poly(vinyl pyrrolidone) (PVP) caused repulsion on gold nanoparticles surface because steric interactions with polymer, for this reason this kind of polymers could be used as stabilizer agent. The aim of this work is to study the synthesis and stabilization of gold nanoparticles with PVP and gum Arabic using gamma radiation. The results obtained by samples analysis using UV-Visible showed that the gamma irradiation doses influenced the nanoparticles formation by PVP but that is not the case with the GA, because for smaller quantity of Arabic gum in different doses produced and stabilized nanoparticles. The samples were observed for 20 days and showed stability. We have obtained preliminary results showed that the use of radiation is applicable to the formation of gold nanoparticles. (author)

  2. Comparative study of gum arabic and PVP as stabilizing agents for synthesis of gold nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Andressa A.; Leal, Jessica; Geraldes, Adriana N.; Lugao, Ademar B., E-mail: andressa_alvess@yahoo.com.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    Use Colloidal metallic nanoparticles such as gold nanoparticles have received a great attention, due in part to their specific properties and potential applications. Control of size and uniformity of nanoparticles is important to prevent aggregation. High-molecular-weight polymers were used as stabilizer agents. Natural polymers, such as gum Arabic, are used as stabilizer because of capping nanoparticles behavior and present advantages such as solubility, non- toxicity and its compatibility for pharmaceutical and biomedical applications. Previous studies showed that the hydrophilic group of Poly(vinyl pyrrolidone) (PVP) caused repulsion on gold nanoparticles surface because steric interactions with polymer, for this reason this kind of polymers could be used as stabilizer agent. The aim of this work is to study the synthesis and stabilization of gold nanoparticles with PVP and gum Arabic using gamma radiation. The results obtained by samples analysis using UV-Visible showed that the gamma irradiation doses influenced the nanoparticles formation by PVP but that is not the case with the GA, because for smaller quantity of Arabic gum in different doses produced and stabilized nanoparticles. The samples were observed for 20 days and showed stability. We have obtained preliminary results showed that the use of radiation is applicable to the formation of gold nanoparticles. (author)

  3. Study on stability of labeled yttrium-90 with lipiodol by chemical extraction for liver cancer

    International Nuclear Information System (INIS)

    Mu, P.Y.; Jiang, X.L.; Chen, J.; Zhu, Y.J.

    2005-01-01

    human's blood (heparan lithium be used as anticoagulant). The results show that loss efficiencies of labeled yttrium-90 after adding newly-born cattle serum 1 hour, 1 day, 3 and 7 days are 3.38%, 3.12%, 4.2 % and 6.02%, and loss efficiencies of labeled yttrium-90 after adding human's blood 1 hour, 1 day, 3 and 7 days are 2.55%, 5.92%, 7.82% and 5.64%. 90 Y has been used for successful preclinical studies in liver cancers. It is the most possible radioisotope for labeling with lipiodol to treat hepatocellular carcinoma, particularly in cases of unresectable liver tumors, since 90 Y is available from several commercial sources in clinical quality, 90 Y has a half-life of 64 h and emits β-electrons with a maximum energy E max of 2.27 Mev, giving it a maximum range in tissue of 12 mm. Lipiodol is a sterile injectable radioopaque diagnostic agent used in lymphography and hysterosalpingography, because it is selectively retained in hepatocellular carcinoma. Lipiodol has been used as a vehicle to deliver localized doses of chemotherapeutic and radioactive agents to hepatocellular carcinoma following intra- arterial hepatic infusion. The stability tested with newly-born cattle serum and human's blood in this study attained great result, so we can carry on the further animal test and clinical trial.

  4. Hydraulic Stability of Accropode Armour

    DEFF Research Database (Denmark)

    Jensen, T.; Burcharth, H. F.; Frigaard, Peter

    The present report describes the hydraulic model tests of Accropode armour layers carried out at the Hydraulics Laboratory at Aalborg University from November 1995 through March 1996. The objective of the model tests was to investigate the hydraulic stability of Accropode armour layers...... with permeable core (crushed granite with a gradation of 5-8 mm). The outcome of this study is described in "Hydraulic Stability of Single-Layer Dolos and Accropode Armour Layers" by Christensen & Burcharth (1995). In January/February 1996, Research Assistant Thomas Jensen carried out a similar study...

  5. Studies on Thermal Oxidation Stability of Aviation Lubricating Oils

    Directory of Open Access Journals (Sweden)

    Wu Nan

    2017-01-01

    Full Text Available Simulating the operating condition of aviation engine via autoclave experiment of high temperature and pressure, we studied the physic-chemical property of poly-α-olefin base oil samples mixed with antioxidants of 2,6-di-tert-butyl-4-methylphenol and p,p’-diisooctyl diphenylamine at different temperature. The mechanism of degradation of PAO aviation lubricating oil was analyzed according to the oxidized products by modern analytical instruments. The results showed that the aviation lubricating oil produced a large number of low molecule compounds while increasing the temperature, and resulted in the viscosity decreasing and acid value increasing which indicated that the thermal oxidation of the oil sample underwent a radical process.

  6. Method validation and stability study of quercetin in topical emulsions

    Directory of Open Access Journals (Sweden)

    Rúbia Casagrande

    2009-01-01

    Full Text Available This study validated a high performance liquid chromatography (HPLC method for the quantitative evaluation of quercetin in topical emulsions. The method was linear within 0.05 - 200 μg/mL range with a correlation coefficient of 0.9997, and without interference in the quercetin peak. The detection and quantitation limits were 18 and 29 ng/mL, respectively. The intra- and inter-assay precisions presented R.S.D. values lower than 2%. An average of 93% and 94% of quercetin was recovered for non-ionic and anionic emulsions, respectively. The raw material and anionic emulsion, but not non-ionic emulsion, were stable in all storage conditions for one year. The method reported is a fast and reliable HPLC technique useful for quercetin determination in topical emulsions.

  7. Molecular biological study on genetic stability of the genome

    International Nuclear Information System (INIS)

    Hori, Tada-aki; Takahashi, Ei-ichi; Tsuji, Hideo; Tsuji, Satsuki

    1989-01-01

    A population cytogenetic study has been performed in 1022 healthy subjects and 547 cancer patients to determine baseline frequencies of autosomal rate fragile sites. Out of 17 rare autosomal fragile sites defined in HBM9 (1985), the following six were detected: fra(2)(q11), fra(10)(q25), fra(11)(q13), fra(11)(q23), fra(16)(q22) and fra(17)(q12). Other three new fragile sites were also detected: fra(8)(q24.1), fra(11)(q15.1) and fra(16)(p12.1). They were all distamycin A-inducible and located at the junctions of G/R-bands. The incidence of these autosomal fragile sites was 5% in both healthy subjects and cancer patients. Distamycin A-induced fragile sites may play a role in the etiology of leukemia, myeloproliferative disorders, and gynecological tumors. The present study also examined the mechanism of fragile X expression associated with fragile X syndrome in thymidine-prototrophic and auxotrophic human-mouse somatic cell hybrids. In these hybrid cells, both low and high thymidylate stresses were found to be effective in inducing fragile X expression, even in a hybrid clone that retained a fragile X chromosome as the only human chromosome. An addition of deoxycytidine completely abolished the effect of high thymidylate stress achieved by excess amounts of thymidine. It is concluded that the expression is an intrinsic property of the fragile X mutation resulting from chromosomal change in a special class of replicons with polypurine/polypyrimidine DNA sequence. (Namekawa, K)

  8. Wind Turbine and Wind Power Plant Modelling Aspects for Power System Stability Studies

    DEFF Research Database (Denmark)

    Altin, Müfit; Hansen, Anca Daniela; Göksu, Ömer

    2014-01-01

    Large amount of wind power installations introduce modeling challenges for power system operators at both the planning and operational stages of power systems. Depending on the scope of the study, the modeling details of the wind turbine or the wind power plant are required to be different. A wind...... turbine model which is developed for the short-term voltage stability studies can be inaccurate and sufficient for the frequency stability studies. Accordingly, a complete and detailed wind power plant model for every kind of study is not feasible in terms of the computational time and also...... and wind power plants are reviewed for power system stability studies. Important remarks of the models are presented by means of simulations to emphasize the impact of these modelling details on the power system....

  9. Hyperspectral remote sensing techniques applied to the noninvasive investigation of mural paintings: a feasibility study carried out on a wall painting by Beato Angelico in Florence

    Science.gov (United States)

    Cucci, Costanza; Picollo, Marcello; Chiarantini, Leandro; Sereni, Barbara

    2015-06-01

    Nowadays hyperspectral imaging is a well-established methodology for the non-invasive diagnostics of polychrome surfaces, and is increasingly utilized in museums and conservation laboratories for documentation purposes and in support of restoration procedures. However, so far the applications of hyperspectral imaging have been mainly limited to easel paintings or paper-based artifacts. Indeed, specifically designed hyperspectral imagers, are usually used for applications in museum context. These devices work at short-distances from the targets and cover limited size surfaces. Instead, almost still unexplored remain the applications of hyperspectral imaging to the investigations of frescoes and large size mural paintings. For this type of artworks a remote sensing approach, based on sensors capable of acquiring hyperspectral data from distances of the order of tens of meters, is needed. This paper illustrates an application of hyperspectral remote sensing to an important wall-painting by Beato Angelico, located in the San Marco Museum in Florence. Measurements were carried out using a re-adapted version of the Galileo Avionica Multisensor Hyperspectral System (SIM-GA), an avionic hyperspectral imager originally designed for applications from mobile platforms. This system operates in the 400-2500 nm range with over 700 channels, thus guaranteeing acquisition of high resolution hyperspectral data exploitable for materials identification and mapping. In the present application, the SIM-GA device was mounted on a static scanning platform for ground-based applications. The preliminary results obtained on the Angelico's wall-painting are discussed, with highlights on the main technical issues addressed to optimize the SIM-GA system for new applications on cultural assets.

  10. Laboratory Electrical Resistivity Studies on Cement Stabilized Soil

    Science.gov (United States)

    Lokesh, K. N.; Jacob, Jinu Mary

    2017-01-01

    Electrical resistivity measurement of freshly prepared uncured and cured soil-cement materials is done and the correlations between the factors controlling the performance of soil-cement and electrical resistivity are discussed in this paper. Conventional quality control of soil-cement quite often involves wastage of a lot of material, if it does not meet the strength criteria. In this study, it is observed that, in soil-cement, resistivity follows a similar trend as unconfined compressive strength, with increase in cement content and time of curing. Quantitative relations developed for predicting 7-day strength of soil-cement mix, using resistivity of the soil-cement samples at freshly prepared state, after 1-hour curing help to decide whether the soil-cement mix meets the desired strength and performance criteria. This offers the option of the soil-cement mix to be upgraded (possibly with additional cement) in its fresh state itself, if it does not fulfil the performance criteria, rather than wasting the material after hardening. PMID:28540364

  11. Low temperature nuclear orientation studies of nuclei far from stability

    International Nuclear Information System (INIS)

    Brown, D.E.

    1990-01-01

    One of the major current interests in nuclear physics is to study transitional nuclei which lie between well known regions of spherical and deformed nuclei. The neutron deficient Tellurium and Iodine isotopes are examples of such nuclei. In both cases, the influence of a πg 9/2 intruder orbital is expected to be strong at low excitation energies and at A ∼120. The 120 Te decay scheme has been investigated in detail by LTNO supported by γ-γ coincidences and conversion electron spectroscopy. An interaction of the level scheme using an IBM-2 calculation which allows for mixing between the ground state and a (4p-2h) intruder state is made. The success of this calculation provides strong evidence for the existence of the intruder configuration in 120 Te. In addition, the relative electric quadrupole moments of the ground states in 120-123 I have been measured. The light Platinum isotopes are also transitional nuclei. The ground state magnetic dipole and electric quadrupole moments have been measured for 185,187 Pt which lie inside the region in which the shape transition is known to occur. An interpretation of nuclear moments and level structures in the range 179≤A≤193 using a particle plus triaxial core shows that the shape change takes place gradually via a broad region in which the nuclear shape is triaxial. (author)

  12. Experimental and theoretical study of solid solution stability under irradiation

    International Nuclear Information System (INIS)

    Cauvin, Richard.

    1981-08-01

    The behavior of dilute alloys (Al-Zn, Al-Ag, Al-Si, Al-Ge and Al-Mg) under 1 MeV electron irradiation has been studied in a high voltage electron microscope. A phenomenon of homogeneous precipitation induced by irradiation in undersaturated solid solutions (Al-Zn, Al-Ag and Al-Si) has been discovered; the observed precipitates are either coherent or incoherent, but never associated with point defect sinks. The solubility limit is a function of irradiation temperature and flux; but, under irradiation, it does not behave as a true thermal solubility limit (without irradiation). The existing theories (kinetic or strictly thermodynamic) do not account for this phenomenon. It is shown that the irreversibility of the mutual recombination between trapped vacancies and mixed interstitials is the driving force of this homogeneous precipitation. Using a dilute solid solution model, we show that, under irradiation, the homogeneous stationary state, stable from a strictly thermodynamic point of view, can be unstable when the recombination reaction is taken into account. The solubility limit under irradiation is calculated with a nucleation-growth model taking account for this effect; it is proportional to the thermal solubility limit without irradiation. This model explains all the experimental observations [fr

  13. A Study on Stability of Limit Cycle Walking Model with Feet: Parameter Study

    OpenAIRE

    Yonggwon Jeon; Youn-sik Park; Youngjin Park

    2013-01-01

    In this paper, two kinds of feet, namely, curved and flat feet, are added to limit cycle walking model to investigate its stability properties. Although both models are already proposed and are investigated, most previous works are focused on efficiency and gait behaviors. Only the stability properties of the simplest walking model conceived Garcia et al. are well defined. Therefore, there is still a need for a precise research on the effect of feet, especially in the view of local stability,...

  14. Considerations for transient stability, fault capacity and power flow study of offsite power system

    Energy Technology Data Exchange (ETDEWEB)

    Shin, M C; Kim, C W; Gwon, M H; Park, C W; Lee, K W; Kim, H M; Lee, G Y; Joe, P H [Sungkyunkwan Univ., Seoul (Korea, Republic of)

    1994-04-15

    By study of power flow calculation, fault capacity calculation and stability analysis according to connection of two units YGN 3 and 4 to KEPCO power system, we have conclusions as follows. As the result of power flow calculation, at peak load, the voltage change of each bus is very small when YGN 3 and 4 is connected with KEPCO power system. At base load, installation of phase modifing equipment is necessary in Seoul, Kyungki province where load is concentrated because bus voltage rises by increasing of charge capacity caused installation of underground cables. As the result of fault capacity calculation, fault capacity is increased because fault current increases when two units YGN 3 and 4 is connected with KEPCO power system. But it is enough to operate with presenting circuits breaker rated capacity. Transient stability studies have been conducted on the YK N/P generators 3 and 4 using a digital computer program. Three phase short faults have been simulated at the YK N/P 345[KV] bus with the resulting outage of transmission circuits. Several fault clearing times are applied: 6 cycles, 12 cycles, 15 cycles. The study results demonstrate that the transient stability of YK N/P is adequate to maintain stable for three phase short faults cleared within 12 cycles. The study results also demonstrate that the transient stability of YK N/P is stable for machine removals except 4-machine removal. In addition, the study shows that the transient stability analysis is implemented for the case of load.

  15. Vaporization and diffusion studies on the stability of doped lanthanum gallates

    Energy Technology Data Exchange (ETDEWEB)

    Stanislowski, M.; Singheiser, L.; Hilpert, K. [Research Center Juelich, Institute for Materials and Processes in Energy Systems, IWV-2, 52425 Juelich (Germany); Peck, D.H.; Woo, S.K. [Korea Institute of Energy Research, 71-2 Jang-Dong, Yuseong, 305-343 Daejeon (Korea); Schulz, O.; Martin, M. [RWTH Aachen University, Institute of Physical Chemistry, Landoltweg 2, 52056 Aachen (Germany)

    2006-07-15

    Vaporization and diffusion determine the stability of doped lanthanum gallates under SOFC operating conditions. Systematic vaporization studies of Ga and other elements were carried out using the vapor transpiration method. It was shown that the Ga vaporization is controlled by diffusion from the bulk to the surface. Diffusion coefficients D{sub Ga} and vaporization coefficients {alpha}{sub Ga} were determined by fitting the measured vaporization data to a vaporization model. Secondary phases formed as a result of the vaporization were detected. The influence of different doping levels of Sr, Mg and Fe on the Ga vaporization was elucidated. Moreover, cation self-diffusion of {sup 139}La, {sup 84}Sr and {sup 25}Mg as well as cation impurity diffusion of {sup 144}Nd, {sup 89}Y and {sup 56}Fe in polycrystalline samples of doped lanthanum gallate were directly determined for the composition La{sub 0.9}Sr{sub 0.1}Ga{sub 0.9}Mg{sub 0.1}O{sub 2.9} as an example, from diffusion profiles determined by SIMS. It was found that diffusion occurs by means of bulk and grain boundaries. The bulk diffusion coefficients are similar for all cations with activation energies which are strongly dependent on temperature. The results are explained by a frozen-in defect structure at low temperatures in the ABO{sub 3} perovskite lattice and by proposing a defect cluster containing cation vacancies in the A and B sublattices, as well as oxygen vacancies. (Abstract Copyright [2006], Wiley Periodicals, Inc.)

  16. Study of vibrations and stabilization of linear collider final doublets at the sub-nanometer scale

    International Nuclear Information System (INIS)

    Bolzon, B.

    2007-11-01

    CLIC is one of the current projects of high energy linear colliders. Vertical beam sizes of 0.7 nm at the time of the collision and fast ground motion of a few nanometers impose an active stabilization of the final doublets at a fifth of nanometer above 4 Hz. The majority of my work concerned vibrations and active stabilization study of cantilever and slim beams in order to be representative of the final doublets of CLIC. In a first part, measured performances of different types of vibration sensors associated to an appropriate instrumentation showed that accurate measurements of ground motion are possible from 0.1 Hz up to 2000 Hz on a quiet site. Also, electrochemical sensors answering a priori the specifications of CLIC can be incorporated in the active stabilization at a fifth of nanometer. In a second part, an experimental and numerical study of beam vibrations enabled to validate the efficiency of the numerical prediction incorporated then in the simulation of the active stabilization. Also, a study of the impact of ground motion and of acoustic noise on beam vibrations showed that an active stabilization is necessary at least up to 1000 Hz. In a third part, results on the active stabilization of a beam at its two first resonances are shown down to amplitudes of a tenth of nanometer above 4 Hz by using in parallel a commercial system performing passive and active stabilization of the clamping. The last part is related to a study of a support for the final doublets of a linear collider prototype in phase of finalization, the ATF2 prototype. This work showed that relative motion between this support and the ground is below imposed tolerances (6 nm above 0.1 Hz) with appropriate boundary conditions. (author)

  17. Scanning transient current study of the I-V stabilization phenomena in silicon detectors irradiated by fast neutrons

    International Nuclear Information System (INIS)

    Eremin, V.; Verbitskaya, E.; Sidorov, A.; Fretwurst, E.; Lindstrom, G.

    1996-03-01

    Investigation of the I-V stabilization phenomena in neutron irradiated silicon detectors has been carried out using scanning transient current technique (STCT) on non-irradiated PP + -p-n + detectors. The PP + -p-n + detectors were used to simulate the PP + -n-n + detectors irradiated beyond the space charge sign inversion (SCSI). Two mechanisms partially responsible for the I- V stabilization have been identified

  18. Studies of feedback stabilization of axisymmetric modes in deformable tokamak plasmas

    International Nuclear Information System (INIS)

    Ward, D.J.

    1991-01-01

    A new linear MHD stability code, NOVA-W, is described and applied to the study of the feedback stabilization of the axisymmetric mode in deformable tokamak plasma. The NOVA-W code is a modification of the non-variational MHD stability code NOVA that includes the effects of resistive passive conductors and active feedback circuits. The vacuum calculation has been reformulated in terms of the perturbed poloidal flux to allow the inclusion of perturbed toroidal currents outside the plasma. The boundary condition at the plasma-vacuum interface relates the instability displacement to the perturbed poloidal flux. This allows a solution of the linear MHD stability equations with the feedback effects included. The code has been tested for the case of passive stabilization against a simplified analytic model and against a different numerical calculation for a realistic tokamak configuration. The comparisons demonstrate the accuracy of the NOVA-W results. The NOVA-W code is used to examine the effects of plasma deformability on feedback stabilization. It is seen that plasmas with shaped cross sections have unstable motion different from a rigid shift. Plasma equilibria with large triangularity show particularly significant deviations from a uniform rigid shift. Furthermore, the placement of passive conductors is shown to modify the non-rigid components of the motion in a way that reduces the stabilizing effects of these conductors. The eigenfunction is also modified under the effects of active feedback. This deformation is seen to depend strongly on the position of the flux loops. These non-rigid components of the eigenfunction always serve to reduce the stabilizing effect of the active feedback system by reducing the measurable poloidal flux at the flux-loop locations

  19. Parametric study of the stability properties of a thermo hydraulic channel coupled to punctual kinetics

    International Nuclear Information System (INIS)

    Cecenas F, M.; Campos G, R.M.

    2005-01-01

    The reason of decay is the indicator of stability usually used in the literature to evaluate stability of boiling water reactors, however, in the operation of this type of reactors is considered the length of boiling like an auxiliary parameter for the evaluation of stability. In this work its are studied the variation of these two indicators when modifying a given an operation parameter in a model of a thermo hydraulic channel coupled to punctual kinetics, maintaining all the other input constant variables. The parameters selected for study are the axial profile of power, the subcooling, the flow of coolant and the thermal power. The study is supplemented by means of real data of plant using the one Benchmark of Ringhals, and the results for the case of the ratio of decay its are compared with the decay reasons obtained by means of autoregression models of the local instrumentation of neutron flux. (Author)

  20. Computational study of elements of stability of a four-helix bundle protein biosurfactant

    Science.gov (United States)

    Schaller, Andrea; Connors, Natalie K.; Dwyer, Mirjana Dimitrijev; Oelmeier, Stefan A.; Hubbuch, Jürgen; Middelberg, Anton P. J.

    2015-01-01

    Biosurfactants are surface-active molecules produced principally by microorganisms. They are a sustainable alternative to chemically-synthesized surfactants, having the advantages of being non-toxic, highly functional, eco-friendly and biodegradable. However they are currently only used in a few industrial products due to costs associated with production and purification, which exceed those for commodity chemical surfactants. DAMP4, a member of a four-helix bundle biosurfactant protein family, can be produced in soluble form and at high yield in Escherichia coli, and can be recovered using a facile thermal phase-separation approach. As such, it encompasses an interesting synergy of biomolecular and chemical engineering with prospects for low-cost production even for industrial sectors. DAMP4 is highly functional, and due to its extraordinary thermal stability it can be purified in a simple two-step process, in which the combination of high temperature and salt leads to denaturation of all contaminants, whereas DAMP4 stays stable in solution and can be recovered by filtration. This study aimed to characterize and understand the fundamental drivers of DAMP4 stability to guide further process and surfactant design studies. The complementary use of experiments and molecular dynamics simulation revealed a broad pH and temperature tolerance for DAMP4, with a melting point of 122.4 °C, suggesting the hydrophobic core as the major contributor to thermal stability. Simulation of systematically created in silico variants of DAMP4 showed an influence of number and location of hydrophilic mutations in the hydrophobic core on stability, demonstrating a tolerance of up to three mutations before a strong loss in stability occurred. The results suggest a consideration of a balance of stability, functionality and kinetics for new designs according to their application, aiming for maximal functionality but at adequate stability to allow for cost-efficient production using thermal

  1. Mild iron overload in patients carrying the HFE S65C gene mutation: a retrospective study in patients with suspected iron overload and healthy controls

    OpenAIRE

    Holmström, P; Marmur, J; Eggertsen, G; Gåfvels, M; Stål, P

    2002-01-01

    Background and aims: The role of the HFE S65C mutation in the development of hepatic iron overload is unknown. The aim of the present study was: (A) to determine the HFE S65C frequency in a Northern European population; and (B) to evaluate whether the presence of the HFE S65C mutation would result in a significant hepatic iron overload.

  2. Assessment of differences in psychosocial resources and state of health of rural and urban residents – based on studies carried out on students during examination stress

    Directory of Open Access Journals (Sweden)

    Danuta Zarzycka

    2014-11-01

    Full Text Available [b]introduction[/b]. Civilization changes of the environment shaping the psychosocial resources from rural to urban influence human health. [b]aim.[/b] The study aimed to identify the differences due to the place of residence (rural, urban as far as health resources are concerned (social support, sense of coherence, dehydroepiandrosterone sulfate concentration in plasma and health in examination stress situations. The study also determined the concentration of dehydroepiandrosterone sulfate (health resource and cortisol (stress indicator. [b]material and methods.[/b] The psychosocial variables were assessed using the scales: ISEL-48v. Coll., SOC-29, SF-36v.2™ o and analogue scale (perception of examination stress. The study included, based on a stratified sampling (year of study and purposive sampling (written examination, major, 731 students representing the six universities in Lublin, south-east Poland. Among the respondents, 130 students were rural residents. [b]results.[/b] Health resources of students living in rural and urban areas generally differ statistically significantly in social support and the subscales of availability of tangible support, availability of appreciative support, the availability of cognitive-evaluative support and a sense of resourcefulness. The study recorded a sstatistically significantly larger network of family ties among students living in rural areas. The demonstrated diversity of resources did not substantially affect the perceived health, with the exception of pain sensation. Examination stress assessed by subjective opinion of the respondents and plasma cortisol levels vary relative to the place of residence. Students residing in rural areas showed significantly lower cortisol levels values, but subjectively perceived the situation of examation as more stressful. [b]conclusions[/b]. Differences in health resources and their mechanism of impact on health, to a limited extent, were conditioned by the place

  3. Dynamic Voltage Stability Studies using a Modified IEEE 30-Bus System

    Directory of Open Access Journals (Sweden)

    Oluwafemi Emmanuel Oni

    2016-09-01

    Full Text Available Power System stability is an essential study in the planning and operation of an efficient, economic, reliable and secure electric power system because it encompasses all the facet of power systems operations, from planning, to conceptual design stages of the project as well as during the systems operating life span. This paper presents different scenario of power system stability studies on a modified IEEE 30-bus system which is subjected to different faults conditions. A scenario whereby the longest high voltage alternating current (HVAC line is replaced with a high voltage direct current (HVDC line was implemented. The results obtained show that the HVDC line enhances system stability more compared to the contemporary HVAC line. Dynamic analysis using RMS simulation tool was used on DigSILENT PowerFactory.

  4. Diabetes patients requiring glucose-lowering therapy and nondiabetics with a prior myocardial infarction carry the same cardiovascular risk: a population study of 3.3 million people

    DEFF Research Database (Denmark)

    Schramm, Tina Ken; Gislason, Gunnar H; Køber, Lars

    2008-01-01

    BACKGROUND: Previous studies reveal major differences in the estimated cardiovascular risk in diabetes mellitus, including uncertainty about the risk in young patients. Therefore, large studies of well-defined populations are needed. METHODS AND RESULTS: All residents in Denmark > or = 30 years...... of age were followed up for 5 years (1997 to 2002) by individual-level linkage of nationwide registers. Diabetes patients receiving glucose-lowering medications and nondiabetics with and without a prior myocardial infarction were compared. At baseline, 71 801 (2.2%) had diabetes mellitus and 79 575 (2.......4%) had a prior myocardial infarction. Regardless of age, age-adjusted Cox proportional-hazard ratios for cardiovascular death were 2.42 (95% confidence interval [CI], 2.35 to 2.49) in men with diabetes mellitus without a prior myocardial infarction and 2.44 (95% CI, 2.39 to 2.49) in nondiabetic men...

  5. Market survey on products from the Tema Oil Refinery carried out as part of the feasibility study on the Tema Oil Refinery expansion project. Export trade information

    International Nuclear Information System (INIS)

    Anon.

    1991-10-01

    The Tema Oil Refinery (TOR), which was commissioned in 1963, is a simple hydroskimming plant which processes crude oil into LPG, gasoline, kerosene, gasoil, and fuel oil. It is the only petroleum refinery in Ghana. Over the years some of the equipment in the refinery has deteriorated or become obsolete necessitating major rehabilitation. A feasibility study is investigating the modernization and expansion of the refinery to meet projected market demands until the year 2005. The report presents the results of a market survey done on products from TOR

  6. “Did we learn English or what?”: A study abroad student in the UK carrying and crossing boundaries in out-of-class communication

    Directory of Open Access Journals (Sweden)

    Khawla M. Badwan

    2017-03-01

    Full Text Available Language educators in many parts of the world are torn between preparing language learners to pass language proficiency tests and trying to let their classrooms reflect the messiness of out-of-class communication. Because testing is “an activity which perhaps more than any other dictates what is taught” (Hall, 2014, p. 379, helping students to pass language proficiency tests seems to be a current top priority. Since globalisation “has destabilised the codes, norms, and conventions that FL [foreign language] educators relied upon to help learners be successful users of the language once they had left their classrooms” (Kramsch, 2014, p.296, the gap between what is taught in classrooms or measured in examination halls and what is used in real life situations has become much bigger. Testimonies from Study abroad students feed into this discussion. This article addresses the gap between being a language learner and a language user and the implications of this on learners’ perceptions of their language abilities, as illustrated by the story of Mahmoud, a study abroad student in the UK. It also features learner’s voice, exploring Mahmoud’s views of his previous formal language education and concludes with pedagogical implications for language educators.

  7. STUDY OF THE EFFECT OF SOIL CEMENT ELEMENTS WHEN STABILIZING ROADBED MODEL IN LABORATORY CONDITIONS

    Directory of Open Access Journals (Sweden)

    V. D Petrenko

    2017-12-01

    Full Text Available Purpose.Experimental studies allow determining th estress-strain state or bearing capacity of the tested soil body. A preliminary study of the results of model testing and experimental research allows us to find the optimal solutions and to justify the parameters of the chosen technology. The purpose of this work is to determine the effect of soil cement elements when stabilizing the roadbed on a weak subgrade using the soil tests in laboratory conditions. Methodology. During the development of measures for the reconstruction and consolidation of soil bodies, their strength is tested using many methods. In all cases, we take into account the physical and mechanical characteristics of soils obtained as a result of research, as well as the existing regulatory documents. We performed the experimental studies by model testing in laboratory conditions. The model testing was based on the corresponding relationships between geometric sizes, mechanical properties of materials, loads and other factors on which the stress-strain state depends. During testing, the model was loaded gradually. We maintained each load level up to conditional stabilization of the soil deformation. We took the readings from measuring devices at each stage of loading after achievement of stabilization of soil mass deformations. We fixed the readings in the test journal. Findings. During stabilization with soil cement piles there is an improvement in mechanical properties, which leads to a decrease in deformations by 2…3.5 times. Each test is accompanied with graphs of relative deformations-stress dependence, as well as deformation curves and compression curves. According to the results of experimental stu-dies, it can be seen that when testing a model with cement piles, compared with a model without soil cement piles, the relative deformations of the samples taken prior to the experiment and after the experiment almost coincide, indicating a decrease in deformability under

  8. Implications of the stability behavior of zinc oxide nanoparticles for toxicological studies

    Science.gov (United States)

    Meißner, Tobias; Oelschlägel, Kathrin; Potthoff, Annegret

    2014-08-01

    The increasing use of zinc oxide (ZnO) nanoparticles in sunscreens and other cosmetic products demands a risk assessment that has to be done in toxicological studies. Such investigations require profound knowledge of the behavior of ZnO in cell culture media. The current study was performed to get well-dispersed suspensions of a hydrophilic (ZnO-hydro) and a lipophilic coated (ZnO-lipo) ZnO nanomaterial for use in in vitro tests. Therefore, systematic tests were carried out with common dispersants (phosphate, lecithin, proteins) to elucidate chemical and physical changes of ZnO nanoparticles in water and physiological solutions (PBS, DMEM). Non-physiological stock suspensions were prepared using ultrasonication. Time-dependent changes of pH, conductivity, zeta potential, particle size and dissolution were recorded. Secondly, the stock suspensions were added to physiological media with or without albumin (BSA) or serum (FBS), to examine characteristics such as agglomeration and dissolution. Stable stock suspensions were obtained using phosphate as natural and physiological electrostatic stabilizing agent. Lecithin proved to be an effective wetting agent for ZnO-lipo. Although the particle size remained constant, the suspension changed over time. The pH increased as a result of ZnO dissolution and formation of zinc phosphate complexes. The behavior of ZnO in physiological media was found to depend strongly on the additives used. Applying only phosphate as additive, ZnO-hydro agglomerated within minutes. In the presence of lecithin or BSA/serum, agglomeration was inhibited. ZnO dissolution was higher under physiological conditions than in the stock suspension. Serum especially promoted this process. Using body-related dispersants (phosphate, lecithin) non-agglomerating stock suspensions of hydrophilic and lipophilic ZnO were prepared as a prerequisite to perform meaningful toxicological investigation. Both nanomaterials showed a non-negligible dissolution behavior

  9. Study on Enhancement Principle and Stabilization for the Luminol-H2O2-HRP Chemiluminescence System.

    Directory of Open Access Journals (Sweden)

    Lihua Yang

    Full Text Available A luminol-H2O2-HRP chemiluminescence system with high relative luminescent intensity (RLU and long stabilization time was investigated. First, the comparative study on the enhancement effect of ten compounds as enhancers to the luminol-H2O2-HRP chemiluminescence system was carried out, and the results showed that 4-(imidazol-1-ylphenol (4-IMP, 4-iodophenol (4-IOP, 4-bromophenol (4-BOP and 4-hydroxy-4'-iodobiphenyl (HIOP had the best performance. Based on the experiment, the four enhancers were dissolved in acetone, acetonitrile, methanol, and dimethylformamide (DMF with various concentrations, the results indicated that 4-IMP, 4-IOP, 4-BOP and HIOP dissolved in DMF with the concentrations of 0.2%, 3.2%, 1.6% and 3.2% could get the highest RLU values. Subsequently, the influences of pH, ionic strength, HRP, 4-IMP, 4-IOP, 4-BOP, HIOP, H2O2 and luminol on the stabilization of the luminol-H2O2-HRP chemiluminescence system were studied, and we found that pH value, ionic strength, 4-IMP, 4-IOP, 4-BOP, HIOP, H2O2 and luminol have little influence on luminescent stabilization, while HRP has a great influence. In different ranges of HRP concentration, different enhancers should be selected. When the concentration is within the range of 0~6 ng/mL, 4-IMP should be selected. When the concentration of HRP ranges from 6 to 25 ng/mL, 4-IOP was the best choice. And when the concentration is within the range of 25~80 ng/mL, HIOP should be selected as the enhancer. Finally, the three well-performing chemiluminescent enhanced solutions (CESs have been further optimized according to the three enhancers (4-IMP, 4-IOP and HIOP in their utilized HRP concentration ranges.

  10. Validation of a liquid chromatography method for the simultaneous determination of sulfadimethoxine and trimethoprim and application to a stability study.

    Science.gov (United States)

    Louati, K; Mistiri, F; Kallel, M; Safta, F

    2010-03-01

    A liquid chromatography method is described for the simultaneous determination of sulfadimetoxine and trimethoprim from a veterinary formulation at the proportion of 187 mg and 40 mg respectively in presence of some excipient. The solution was subjected to different International Conference On Harmonisation prescribed stress conditions (hydrolysis, oxidation and photolysis). A stability-indicating high-performance liquid chromatography method was developed for the analysis of active substances in presence of their major degradation products. It involved a Knauer Eurospher C18 thermostated column at 25 degrees C, and 9.57 mM phosphate buffer (pH adjusted to 2.0 with orthophosphoric acid)-acetonitrile (70:30 v/v) as mobile phase. The mobile phase flow rate and sample volume injected were 1.2 mL/min and 20 microL, respectively. The selected wavelength for the determination was 248 nm. The method was validated for linearity, precision, accuracy and specificity, and then applied to a stability study of sulfadimetoxine and trimethoprim in the veterinary solution packaged in high density polyethylene plastic bottles of 1 L and 100 mL thermosealed and no thermosealed and corked by a white cap, at both accelerated and long-term conditions required by the International Conference On Harmonisation. The method developed, which separates all of the most degradation products formed under variety of conditions, proved to be simple, accurate, precise and specific. The results of the stress degradation show that the solution is more sensitive to hydrolysis. The stability studies carried out on three batches of each presentation show that the finished product remains stable for six months. Copyright 2010 Elsevier Masson SAS. All rights reserved.

  11. Linear stability of a fuel channel uniformly heated considering retrofeeding by vacuum. Theoretical study

    International Nuclear Information System (INIS)

    Gonzalez M, V.; Salinas H, J.G.; Espinosa P, G.

    2000-01-01

    The Technology, Regulation and Services Management of the National Commission of Nuclear Safety and Safeguards in coordinated form with the IPH Department of the Metropolitan Autonomous-Iztapalapa University, developed the present project to study the linear stability in a fuel channel uniformly heated with effects of retrofeeding by vacuums. In this study the methodology used in the analysis of linear stability of the nuclear reactor unit 1 at Laguna Verde power plant is described which represented by an average channel uniformly heated. The conceptual model consists of two cells which represent the two regions in which is divided the channel according to the cooling is in one and two phases, considering the boiling length dependent in the time. It is used the homogeneous flux models for describing the thermohydraulic behavior of the cooling in the two phases region. The neutron processes with the punctual model of the neutron kinetics with a group of retarded neutrons precursors are described. It is studied the behavior of the system in the frequency domain with the transfer functions obtained and it is characterized in four operation states corresponding to the four corners of the low stability zone in the map power-flow Laguna Verde power plant. For these operation states the characteristic frequency is determined and the corresponding Nyquist diagrams are obtained. The results show that the system stability depends on the power-flow relation and that the operations which implicate a reduction of this relation improve the stability of the system (reducing the power introducing control bars with constant cooling flow or increase cooling flow with bars pattern established). The obtained results with effects of retrofeeding by vacuums show that the value of the characteristic frequency is modified very little with respect to the model without retrofeeding, therefore the thermohydraulic processes seem to determine the response of the stability of the system

  12. Experimental study of silty clay stabilization with cement and lime in multan, pakistan

    International Nuclear Information System (INIS)

    Sultan, T.

    2014-01-01

    Stabilization is valuable substitute for advancing the soil characteristics. The engineering features gained after stabilization differs broadly owing to non-uniformity in constitutions of soil. This study describes an assessment of cement and lime additives for advancing soils ventures. The effectiveness of lime and cement stabilization on geotechnical characteristics of the in situ soil has also been described in the paper. The additives like cement and lime were added in different dosage rates to examine the change in properties of the in situ soil. Cement addition caused an increase in unconfined compression strength (UCS) throughout from 4% to 16% of cement. Moreover, it has been observed that by adding lime, the early strength of clay increases up to 6% of lime but for long term strength i.e. 28 days maximum strengths is achieved for 4% of lime. It also confirms that with more percentage of lime and longer duration of curing, it expands. In addition to the strength behavior of samples at various percentages of cement and lime, the deflection at failure point was also examined. In order to make a straight comparison, both cement and lime stabilized soils were also tested in laboratory. Generally, the performance of Portland cement-stabilized soils was advanced to lime in the experiments performed. (author)

  13. [Do vitamins from foods fortified exceed the allowed limits? Study carried out in population young adolescent and young adult of the metropolitan region of Chile].

    Science.gov (United States)

    Freixas Sepúlveda, Alejandra; Díaz Narváez, Víctor Patricio; Durán Agüero, Samuel; Gaete Verdugo, María Cristina

    2013-01-01

    In order to analyze the usual consumption of vitamins in an adolescent population and young adult in the Metropolitan Region, were 213 food fortified with vitamins of the Chilean market. A survey of consumption and nutrient intake was calculated. The result added vitamins added to food. The normality of the variables of the intake was assessed and data were subjected to analysis of descriptive statisticians and percentiles are determined. Estimated percentages of subjects whose values exceed those fixed for DDR and UL listed for each vitamin and percentage of excess for each case. Discriminant analysis was performed using the M Box test. The correlation canonical and the Statisticians Wilks were estimated. Finally it was estimated the percentage of correctly classified data. Data were processed by the program SPSS 20.0 with a significance level of α ≤ 0.05. The results indicate that you for all the studied vitamins, the percentage of subjects who more than the DDR is for total folate (96.4%) and the lowest percentage is given for the vitamin E and B12 in young adult women. The percentage of subjects who exceed the UL values is greatest for the vitamin B3 (91.9%). According to the canonical correlation, there are differences in behavior between the groups. It is recommended to monitor the behavior and consumption of food fortified with vitamins, especially of the complex B and A. Copyright © AULA MEDICA EDICIONES 2013. Published by AULA MEDICA. All rights reserved.

  14. A new experimental approach to study the stability of logistic map

    International Nuclear Information System (INIS)

    Rani, Mamta; Agarwal, Rashi

    2009-01-01

    Remarkably benign looking logistic transformations x n+1 = rx n (1 - x n ) for choosing x 0 between 0 and 1 and 0 < r ≤ 4 have found a celebrated place in chaos, fractals and discrete dynamics. The purpose of this paper is to enhance the capabilities of logistic map via superior iterations. Stability of logistic map has been studied by running computer programs. Logistic map is stable for 0 < r ≤ 3.2 in Picard orbit. In superior orbit, we see that the range of stability of logistic map increases drastically. Also, chaotic behavior of logistic map disappears in certain cases.

  15. Stability Estimates for a Twisted Rod Under Terminal Loads: A Three-dimensional Study

    KAUST Repository

    Majumdar, Apala

    2012-03-01

    The stability of an inextensible unshearable elastic rod with quadratic strain energy density subject to end loads is considered. We study the second variation of the corresponding rod-energy, making a distinction between in-plane and out-of-plane perturbations and isotropic and anisotropic cross-sections, respectively. In all cases, we demonstrate that the naturally straight state is a local energy minimizer in parameter regimes specified by material constants. These stability results are also accompanied by instability results in parameter regimes defined in terms of material constants. © 2012 Springer Science+Business Media B.V.

  16. Seismic slope stability of embankments: a comparative study on EC8 provisions

    DEFF Research Database (Denmark)

    Zania, Varvara; Tsompanakis, Y.; Psarropoulos, P.N.

    2011-01-01

    According to EC8 provisions, seismic stability assessment of natural slopes is currently performed based on simplified methods i.e. the pseudostatic and the Newmark’s sliding block method. The application of these methods requires the beforehand consideration of major assumptions necessary...... for the selection of either the seismic coefficient or the acceleration time history of the rigid block. Although both ULS and SLS are defined according to acceptable level of deformations at the slope, the assigned level of displacements is not clarified. In the current study the seismic slope stability...

  17. Atomic-scale studies on the effect of boundary coherency on stability in twinned Cu

    Energy Technology Data Exchange (ETDEWEB)

    Niu, Rongmei; Han, Ke, E-mail: han@magnet.fsu.edu; Su, Yi-Feng; Salters, Vincent J. [National High Magnetic Field Laboratory, 1800 E. Paul Dirac Drive, Tallahassee, Florida 32310 (United States)

    2014-01-06

    The stored energy and hardness of nanotwinned (NT) Cu are related to interaction between dislocations and (111)-twin boundaries (TBs) studied at atomic scales by high-angle annular dark-field scanning transmission electron microscope. Lack of mobile dislocations at coherent TBs (CTBs) provides as-deposited NT Cu a rare combination of stability and hardness. The introduction of numerous incoherent TBs (ITBs) reduces both the stability and hardness. While storing more energy in their ITBs than in the CTBs, deformed NT Cu also exhibits high dislocation density and TB mobility and therefore has increased the driving force for recovery, coarsening, and recrystallization.

  18. Atomic-scale studies on the effect of boundary coherency on stability in twinned Cu

    Science.gov (United States)

    Niu, Rongmei; Han, Ke; Su, Yi-Feng; Salters, Vincent J.

    2014-01-01

    The stored energy and hardness of nanotwinned (NT) Cu are related to interaction between dislocations and {111}-twin boundaries (TBs) studied at atomic scales by high-angle annular dark-field scanning transmission electron microscope. Lack of mobile dislocations at coherent TBs (CTBs) provides as-deposited NT Cu a rare combination of stability and hardness. The introduction of numerous incoherent TBs (ITBs) reduces both the stability and hardness. While storing more energy in their ITBs than in the CTBs, deformed NT Cu also exhibits high dislocation density and TB mobility and therefore has increased the driving force for recovery, coarsening, and recrystallization.

  19. Semi-analytical study of the rotational motion stability of artificial satellites using quaternions

    International Nuclear Information System (INIS)

    Dos Santos, Josué C; Zanardi, Maria Cecília; Matos, Nicholas

    2013-01-01

    This study at aims performing the stability analysis of the rotational motion to artificial satellites using quaternions to describe the satellite attitude (orientation on the space). In the system of rotational motion equations, which is composed by four kinematic equations of the quaternions and by the three Euler equations in terms of the rotational spin components. The influence of the gravity gradient and the direct solar radiation pressure torques have been considered. Equilibrium points were obtained through numerical simulations using the softwares Matlab and Octave, which are then analyzed by the Routh-Hurwitz Stability Criterion

  20. Stability Estimates for a Twisted Rod Under Terminal Loads: A Three-dimensional Study

    KAUST Repository

    Majumdar, Apala; Prior, Christopher; Goriely, Alain

    2012-01-01

    The stability of an inextensible unshearable elastic rod with quadratic strain energy density subject to end loads is considered. We study the second variation of the corresponding rod-energy, making a distinction between in-plane and out-of-plane perturbations and isotropic and anisotropic cross-sections, respectively. In all cases, we demonstrate that the naturally straight state is a local energy minimizer in parameter regimes specified by material constants. These stability results are also accompanied by instability results in parameter regimes defined in terms of material constants. © 2012 Springer Science+Business Media B.V.

  1. Study of the effect of aggressive media on the long-term stability of reinforced plates

    International Nuclear Information System (INIS)

    Zelentsov, D.G.; Pochtman, Yu.M.

    1995-01-01

    Many important load-bearing structural elements that operate in agressive media are subjected to simultaneous mechanical and chemical attack. The current status of the problem of designing such members is adequately reflected. It follows from that only a few studies have been devoted to the long-term stability of reinforced plates in aggressive media, and most of them were based on structurally orthotropic theory. Such an approach makes it impossible to construct an adequate model of the deformation process. In particular, it precludes allowance for the effect of the discreteness of the reinforcement on plate stability and determination of changes in the character of deformation of the plate during service

  2. The CLIC stability study on the feasibility of colliding high energy nanobeams

    CERN Document Server

    Assmann, R W; Guignard, Gilbert; Leros, Nicolas; Redaelli, S; Schulte, Daniel; Wilson, Ian H; Zimmermann, Frank

    2002-01-01

    The Compact Linear Collider (CLIC) study at CERN proposes a linear collider with nanometer-size colliding beams at an energy of 3 TeV c.m. ("colliding high energy nanobeams"). The transport, demagnification and collision of these nanobeams imposes magnet vibration tolerances that range from 0.2 nm to a few nanometers. This is well below the floor vibration usually observed. A test stand for magnet stability was set-up at CERN in the immediate neighborhood of roads, operating accelerators, workshops, and regular office space. It was equipped with modern stabilization equipment. The experimental setup and first preliminary results are presented. (10 refs).

  3. [The preparation and characterization of fine dusts carried out in the Clinica del Lavoro di Milano in support of experimental studies].

    Science.gov (United States)

    Occella, E; Maddalon, G; Peruzzo, G F; Foà, V

    1999-01-01

    This paper aims to illustrate the conditions selected at the Clinica del Lavoro of the University of Milan to prepare and analyze a large number of fine dust samples produced over a period of about 50 years, that were initially used for studies within the Clinic performed in its own facilities, and since 1956 were sent to other Italian and overseas laboratories (Luxembourg, UK, Germany, Norway, Sweden, South Korea, USA). The total quantity of material distributed (with maximum size 7-10 microns) was about 2 kg and consisted of the following mineral and artificial compounds: quartz, HF-treated quartz, tridymite, HF-treated tridymite, cristobalite, chromite, anthracite, quartz sand for foundry moulds, sand from the Lybian desert, vitreous silica, pumice, cement, as well small quantities of metallic oxides, organic resins, chrysotile, crocidolite, fibres (vitreous, cotton and polyamidic). About half of the entire quantity of dusts produced consisted of partially HF-treated tridymite. Initially, research on the etiology of silicosis used quartz dust samples, simply sieved or ventilated (consisting of classes finer than 0.04 mm, containing a 15-20% respirable fraction). From 1956 to 1960 the dusts were produced by manual grinding in an agate mortar, below about 10 microns, starting from quartz from Quincinetto (near Ivrea, Province of Turin), containing about 99.5% quartz: particle size and composition were checked using an optical-petrographic technique, with identification of the free and total silica content. Subsequently, the dusts used for biological research were obtained by grinding coarse material with a cast iron pestle and planetary mills, agate and corundum jars. The grinding products were sized by means of centrifugal classification, using the selector developed by N. Zurlo, ensuring control of dust size both optically and by means of wet levigators and hydraulic classifiers (in cooperation with the Institute of Mines of Turin Polytechnic School). After 1990

  4. Association of leisure time physical activity and sports competition activities with high blood pressure levels: study carried out in a sample of Portuguese children and adolescents.

    Science.gov (United States)

    Gaya, A R; Silva, P; Martins, C; Gaya, A; Ribeiro, J C; Mota, J

    2011-05-01

    A better understanding of the different domains and characteristics of children's and adolescent's physical activity (PA) could be a strategy to clarify the association of this behaviour with the early development of cardiovascular risk factors. To examine the relationship between leisure time physical activity (LTPA) and sports competition activities (SCA) with high blood pressure (HBP) levels in a sample of children and adolescents from Porto, Portugal. This is a cross-sectional study, which comprised 503 boys and 572 girls, aged 8-17 years old. LTPA and SCA were assed by self-reported. Students were assigned as active and non-active in SCA or LTPA according to their self-reported participation. Participants were classified as HBP when they are above of the last quartile for systolic and/or diastolic BP adjusted for gender and age. Do not be engaged in LTPA (OR: 1.47; 95% CI: 1.12; 1.93) and SCA (OR: 1.36; 95% CI: 1.02; 1.81) was significantly associated with the likelihood of being HBP. However, when cardiorespiratory fitness (CRF) (OR: 1.23; 95% CI: 0.91; 1.67) and body mass index (BMI) (OR: 1.31; 95% CI: 0.98; 1.75) were included on SCA model, the association between SCA with HBP did not showed significant results. Children and adolescents who are not engaged in SCA or LTPA are more likely to be classified as having HBP; however, the relationship between SCA and HBP was dependent of CRF and BMI. Further, PA strategies should take these differences on the relationship between HBP, SCA and LTPA. © 2011 Blackwell Publishing Ltd.

  5. Decision-making process of Kala Azar care: results from a qualitative study carried out in disease endemic areas of Nepal.

    Science.gov (United States)

    Adhikari, Shiva Raj; Supakankunti, Siripen; Khan, M Mahmud

    2013-07-12

    Analysis of consumer decision making in the health sector is a complex process of comparing feasible alternatives and evaluating the levels of satisfaction associated with the relevant options. This paper makes an attempt to understand how and why consumers make specific decisions, what motivates them to adopt a specific health intervention, and what features they find attractive in each of the options. The study used a descriptive-explanatory design to analyze the factors determining the choices of healthcare providers. Information was collected through focus group discussions and in-depth interviews. The results suggest that the decision making related to seeking healthcare for Kala Azar (KA) treatment is a complex, interactive process. Patients and family members follow a well-defined road map for decision making. The process of decision making starts from the recognition of healthcare needs and is then modified by a number of other factors, such as indigenous knowledge, healthcare alternatives, and available resources. Household and individual characteristics also play important roles in facilitating the process of decision making. The results from the group discussions and in-depth interviews are consistent with the idea that KA patients and family members follow the rational approach of weighing the costs against the benefits of using specific types of medical care. The process of decision making related to seeking healthcare follows a complex set of steps and many of the potential factors affect the decision making in a non-linear fashion. Our analysis suggests that it is possible to derive a generalized road map of the decision-making process starting from the recognition of healthcare needs, and then modifying it to show the influences of indigenous knowledge, healthcare alternatives, and available resources.

  6. Study on Roll Instability Mechanism and Stability Index of Articulated Steering Vehicles

    Directory of Open Access Journals (Sweden)

    Xuefei Li

    2016-01-01

    Full Text Available This study examines the roll instability mechanism and stability index of articulated steering vehicles (ASVs by taking wheel loaders as the research object. A seven-degree-of-freedom nonlinear dynamics model of the ASVs is built on the basis of multibody dynamics. A physical prototype model of an ASV is designed and manufactured to validate the dynamic model. Test results reasonably agree with the simulation results, which indicates that the established dynamic model can reasonably describe ASV movements. Detailed analysis of the rollover stability of the wheel loader is performed with the use of the established dynamic model. Analysis results show that rollover will occur when the roll angular velocity exceeds a critical threshold, which is affected by lateral acceleration and slope angle. On this basis, a dynamic stability index applicable to the ASVs is presented.

  7. Generating functions and stability study of multivariate self-excited epidemic processes

    Science.gov (United States)

    Saichev, A. I.; Sornette, D.

    2011-09-01

    We present a stability study of the class of multivariate self-excited Hawkes point processes, that can model natural and social systems, including earthquakes, epileptic seizures and the dynamics of neuron assemblies, bursts of exchanges in social communities, interactions between Internet bloggers, bank network fragility and cascading of failures, national sovereign default contagion, and so on. We present the general theory of multivariate generating functions to derive the number of events over all generations of various types that are triggered by a mother event of a given type. We obtain the stability domains of various systems, as a function of the topological structure of the mutual excitations across different event types. We find that mutual triggering tends to provide a significant extension of the stability (or subcritical) domain compared with the case where event types are decoupled, that is, when an event of a given type can only trigger events of the same type.

  8. Studies on electronic structure of interfaces between Ag and gelatin for stabilization of Ag nanoparticles

    International Nuclear Information System (INIS)

    Tani, Tadaaki; Uchida, Takayuki

    2015-01-01

    Extremely high stability of Ag nanoparticles in photographic materials has forced us to study the electronic structures of the interfaces between thin layers of Ag, Au, and Pt and their surface membranes in ambient atmosphere by photoelectron yield spectroscopy in air and Kelvin probe method. Owing to the Fermi level equalization between a metal layer and a membrane coming from air, the electron transfer took place from the membrane to Pt and Au layers and from an Ag layer to the membrane, giving the reason for poor stability of Ag nanoparticles in air. The control of the Fermi level of an Ag layer with respect to that of a gelatin membrane in air could be widely made according to Nernst's equation by changing the pH and pAg values of an aqueous gelatin solution used to form the membrane, and thus available to stabilize Ag nanoparticles in a gelatin matrix. (author)

  9. The study of stability, combustion characteristics and performance of water in diesel emulsion fuel

    Directory of Open Access Journals (Sweden)

    Syafiq Zulkifli

    2017-01-01

    Full Text Available A single cylinder diesel engine study of water in diesel emulsions was conducted to investigate the stability effect of emulsion fuel on three different fuel blends and the water emulsification effect on the engine performance. Emulsified fuels contained 2% of surfactant including Span 80 Tween 80 and tested 10 HLB number. The blends also varied of 5%, 10% and 15% of water in diesel ratios namely as BSW5, BSW10 and BSW15. The fuel blends performance was tested using a single cylinder, direct injection diesel engine, operating at 1860 rpm. The results on stability reveal that high shear homogenizer yields more stability on emulsion fuel than mechanical stirrer and ultrasonic water bath. The engine performance results show that the ignition delay and peak pressure increase with the increment of water percentage up to 15%. However, the results indicate the increment of water percentage is also shows a significant decrease in engine power.

  10. Western Wind and Solar Integration Study Phase 3 – Frequency Response and Transient Stability

    Energy Technology Data Exchange (ETDEWEB)

    Miller, N. W. [GE Energy Management, Schenectady, NY (United States); Shao, M. [GE Energy Management, Schenectady, NY (United States); Pajic, S. [GE Energy Management, Schenectady, NY (United States); D' Aquila, R. [GE Energy Management, Schenectady, NY (United States)

    2014-12-01

    Power system operators and utilities worldwide have concerns about the impact of high-penetration wind and solar generation on electric grid reliability (EirGrid 2011b, Hydro-Quebec 2006, ERCOT 2010). The stability of North American grids under these conditions is a particular concern and possible impediment to reaching future renewable energy goals. Phase 3 of the Western Wind and Solar Integration Study (WWSIS-3) considers a 33% wind and solar annual energy penetration level that results in substantial changes to the characteristics of the bulk power system, including different power flow patterns, different commitment and dispatch of existing synchronous generation, and different dynamic behavior of wind and solar generation. WWSIS-3 evaluates two specific aspects of fundamental frequency system stability: frequency response and transient stability.

  11. Food irradiation and its role in shelf life extension of horticulture produce: a comprehensive evaluation of studies carried out in India and abroad

    International Nuclear Information System (INIS)

    Verma, J.; Gautam, S.

    2015-01-01

    Food irradiation is the process of treating foods to a controlled source of ionizing radiation, to reduce post-harvest losses and ensure its safety. With respect to horticulture produce, the role of food irradiation has been well established to fulfill the phytosanitary requirement of the importing countries and also to ensure food safety in certain commodities. Still for establishing its relevance in extending the shelf-life of horticulture produce, substantial scientific inputs are required. Our objective was therefore to summarize in brief the research findings where role of radiation processing in shelf-life extension of horticulture produce has been addressed. Low dose (0.1 kGy) of γ-radiation resulted in sprout inhibition in potatoes and onions, thus prolonging their storage life upto 4 months at 11-12℃. Radiation processing also delayed ripening process in the climacteric fruits by a week upto one month depending on the cultivars and stored condition. Shelf-life of button mushroom (Agaricus bisporus) was extended up to 10-15 days by γ-radiation treatment of 2-3 kGy and storage at 10±2℃ . A 5 kGy radiation dose and 10℃ storage temperature increased the shelf life of peeled ginger samples upto 70 days. Irradiation of guava fruits with 0.1 kGy γ-radiation increased its post harvest life by 8 days. Shelf-life of Litchi was increased upto 28 days by radiation treatment at 0.5 kGy and subsequent low temperature storage. Shelf-life of leafy vegetables increased upto 20 days by a combination process including γ-radiation (Khade, et.al., unpublished data). Electron beam irradiation (2 kGy) extended shelf-life of fresh strawberry fruits upto 4 day. Apples irradiated at 0.2-0.4 kGy showed improved quality upto 3 months of storage. Shelled sweet corn kernels treated with combination process including γ-radiation (5 kGy) treatment showed prolonged shelf-life of 30 days at 4℃ (Kumar S. et.al., unpublished data). In recent study conducted by us on shelf life

  12. A Study on Stability of Limit Cycle Walking Model with Feet: Parameter Study

    Directory of Open Access Journals (Sweden)

    Yonggwon Jeon

    2013-01-01

    Full Text Available In this paper, two kinds of feet, namely, curved and flat feet, are added to limit cycle walking model to investigate its stability properties. Although both models are already proposed and are investigated, most previous works are focused on efficiency and gait behaviors. Only the stability properties of the simplest walking model conceived Garcia et al. are well defined. Therefore, there is still a need for a precise research on the effect of feet, especially in the view of local stability, bifurcation route to chaos, global stability, falling boundary and energy balance line. Therefore, this article revisits the stability analysis of limit cycle walking model with various foot shape. To analyze the effects of feet, we re-derive the equation of motion of modified models by adding one more parameter of foot shape than the simplest walking model. Also, the falling boundary and energy balance line of modified models are derived to get proper initial conditions for stable walking and to explain global stability. Simulation results show us that the curved feet can enlarge both stable walking range and area of basin of attraction while the case of flat feet depends on foot shape parameter.

  13. Longitudinal Stability Study for the FACET-II e+ Damping Ring

    Energy Technology Data Exchange (ETDEWEB)

    Bane, Karl [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2016-11-29

    This is an initial study of the longitudinal, single-bunch stability in the proposed FACET-II e+ damping ring. It is preliminary because, at present, only a few specific features of the vacuum chamber are known.

  14. Stability and kinetic studies of supported ionic liquid phase catalysts for hydroformylation of propene

    DEFF Research Database (Denmark)

    Riisager, Anders; Fehrmann, Rasmus; Haumann, Marco

    2005-01-01

    Supported ionic liquid phase (SILP) catalysts have been studied with regard to their long-term stability in the continuous gas-phase hydroformylation of propene. Kinetic data have been acquired by variation of temperature, pressure, syngas composition, substrate concentration, and residence time...

  15. LONG TERM STABILITY STUDY AT FNAL AND SLAC USING BINP DEVELOPED HYDROSTATIC LEVEL SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Seryi, Andrei

    2003-05-28

    Long term ground stability is essential for achieving the performance goals of the Next Linear Collider. To characterize ground motion on relevant time scales, measurements have been performed at three geologically different locations using a hydrostatic level system developed specifically for these studies. Comparative results from the different sites are presented in this paper.

  16. Stability of genetic and environmental influences om P300 amplitude: a longitudinal study in adolescent twins

    NARCIS (Netherlands)

    van Beijsterveldt, C.E.M.; van Baal, G.C.M.; Molenaar, P.C.M.; Boomsma, D.I.; de Geus, E.J.C.

    2001-01-01

    This study examined the stability of genetic and environmental influences on individual differences in P300 amplitude during adolescence. The P300 component is an event-related brain potential (ERP) that has attracted much attention as a biological marker for disturbed cognitive processing in

  17. A comparative study of vertical stabilities in the Arabian sea and Bay of Bengal

    Digital Repository Service at National Institute of Oceanography (India)

    Sastry, J.S.; Rao, D.P.

    Stabilities in the upper 300 m in the Arabian Sea and the Bay of Bengal are computed and presented seasonwise. The water column in the Bay of Bengal is more strongly stratified than that in the Arabian Sea. These studies suggest that the vertical...

  18. Effect of implant macro-design on primary stability: A prospective clinical study.

    Science.gov (United States)

    Lozano-Carrascal, Naroa; Salomó-Coll, Oscar; Gilabert-Cerdà, Marta; Farré-Pagés, Nuria; Gargallo-Albiol, Jordi; Hernández-Alfaro, Federico

    2016-03-01

    Implant restorations have become a high predictable treatment option. Several caracteristics such as surgical technique and implant design can influence the treatment outcomes. The aim of the present study was to evaluate the influence of implant macro-design on primary stability measured with resonance frequency analysis (RFA) and insertion torque (IT). Material and Mehods: A total of 47 implants divided in two groups: Test group (TI): 22 Tapered MIS® Seven implants; Control group (CI): 25 cylindrical Astra® Osseospeed implants. All implants were inserted following the manufacturers' standard protocols. Implant primary stability was measured at the moment of implant placement by registering insertion torque values (ITv) and ISQ values by means of Osstell™ Mentor (ISQv) (Integration Diagnostic Ltd., Goteborg, Sweden). In the mandible, mean ISQv for tapered implants (TI) was 71.67±5.16 and for cylindrical implants (CI) 57.15±4.83 (p=0.01). Mean insertion torque was 46.67±6.85 Ncm for TI and 35.77±6.72 Ncm for CI (p=0.01). In the maxilla, mean ISQ was 67.2±4.42 for tapered implants and 49.17±15.30 for cylindrical implants (p=0.01). Mean insertion torque for TI was 41.5±6.26 Ncm and for CI 39.17±6.34 Ncm (p>0.05). For tapered implants, no correlation could be found between implant diameter and primary stability. But for cylindrical implants there was a statistically significant correlation between implant diameter and primary stability: ITv (p=0.03); ISQv (p=0.04). Within the limits of the present study, tapered shaped implants achieve higher primary stability measured through ISQ and insertion torque values. Moreover, for cylindrical implants positive correlation has been established between implant diameter and primary stability.

  19. Impact Study of PMSG-Based Wind Power Penetration on Power System Transient Stability Using EEAC Theory

    Directory of Open Access Journals (Sweden)

    Zhongyi Liu

    2015-11-01

    Full Text Available Wind turbines with direct-driven permanent magnet synchronous generators (PMSGs are widely used in wind power generation. According to the dynamic characteristics of PMSGs, an impact analysis of PMSG-based wind power penetration on the transient stability of multi-machine power systems is carried out in this paper based on the theory of extended equal area criterion (EEAC. Considering the most severe PMSG integration situation, the changes in the system’s equivalent power-angle relationships after integrating PMSGs are studied in detail. The system’s equivalent mechanical input power and the fault period electrical output power curves are found to be mainly affected. The analysis demonstrates that the integration of PMSGs can cause either detrimental or beneficial effects on the system transient stability. It is determined by several factors, including the selection of the synchronous generators used to balance wind power, the reactive power control mode of PMSGs and the wind power penetration level. Two different simulation systems are also adopted to verify the analysis results.

  20. Diagnostic stability among chronic patients with functional psychoses: an epidemiological and clinical study

    Directory of Open Access Journals (Sweden)

    Jakobsen Klaus D

    2007-08-01

    Full Text Available Abstract Background Diagnostic stability and illness course of chronic non-organic psychoses are complex phenomena and only few risk factors or predictors are known that can be used reliably. This study investigates the diagnostic stability during the entire course of illness in patients with non-organic psychoses and attempts to identify non-psychopathological risk factors or predictors. Method 100 patients with functional psychosis were initially characterised using the Operational Criteria Checklist for Psychotic Illness and Affective Illness (OPCRIT, medical records and health registers. To study the stability of diagnoses (i.e. shifts per time, we used registry data to define four measures of diagnostic variation that were subsequently examined in relation to four possible measures of time (i.e. observation periods or hospitalisation events. Afterwards, we identified putative co-variables and predictors of the best measures of diagnostic stability. Results All four measures of diagnostic variation are very strongly associated with numbers-of-hospitalisations and less so with duration-of-illness, duration-of-hospitalisation and with year-of-first-admission. The four measures of diagnostic variation corrected for numbers-of-hospitalisations were therefore used to study the diagnostic stability. Conventional predictors of illness course – e.g. age-of-onset and premorbid-functioning – are not significantly associated with stability. Only somatic-comorbidity is significantly associated with two measures of stability, while family-history-of-psychiatric-illness and global-assessment-of-functioning (GAF scale score show a trend. However, the traditional variables age-of-first-admission, civil-status, first-diagnosis-being-schizophrenia and somatic-comorbidity are able to explain two-fifth of the variation in numbers-of-hospitalisations. Conclusion Diagnostic stability is closely linked with the contact between patient and the healthcare system

  1. Validation of analytical methods for the stability studies of naproxen suppositories for infant and adult use

    International Nuclear Information System (INIS)

    Rodriguez Hernandez, Yaslenis; Suarez Perez, Yania; Garcia Pulpeiro, Oscar

    2011-01-01

    Analytical and validating studies were performed in this paper, with a view to using them in the stability studies of the future formulations of naproxen suppositories for children and adults. The most influential factors in the naproxen stability were determined, that is, the major degradation occurred in acid medium, oxidative medium and by light action. One high-performance liquid chromatography-based method was evaluated, which proved to be adequate to quantify naproxen in suppositories and was selective against degradation products. The quantification limit was 3,480 μg, so it was valid for these studies. Additionally, the parameters specificity for stability, detection and quantification limits were evaluated for the direct semi-aqueous acid-base method, which was formerly validated for the quality control and showed satisfactory results. Nevertheless, the volumetric methods were not regarded as stability indicators; therefore, this method will be used along with the chromatographic methods of choice, that is, thin-layer chromatography and highperformance liquid chromatography, to determine the degradation products

  2. Influence of atmospheric stability on wind-turbine wakes: A large-eddy simulation study

    Science.gov (United States)

    Abkar, Mahdi; Porté-Agel, Fernando

    2014-05-01

    In this study, large-eddy simulation is combined with a turbine model to investigate the influence of atmospheric stability on wind-turbine wakes. In the simulations, subgrid-scale turbulent fluxes are parameterized using tuning-free Lagrangian scale-dependent dynamic models. These models optimize the local value of the model coefficients based on the dynamics of the resolved scales. The turbine-induced forces are parameterized with an actuator-disk model with rotation. In this technique, blade-element theory is used to calculate the lift and drag forces acting on the blades. Emphasis is placed on the structure and characteristics of wind-turbine wakes in the cases where the incident flows to the turbine have the same mean velocity at the hub height but different stability conditions. The simulation results show that atmospheric stability has a significant effect on the spatial distribution of the mean velocity deficit and turbulent fluxes in the wake region. In particular, the magnitude of the velocity deficit increases with increasing stability in the atmosphere. In addition, the locations of the maximum turbulence intensity and turbulent stresses are closer to the turbine in convective boundary layer compared with neutral and stable ones. Detailed analysis of the resolved turbulent kinetic energy (TKE) budget inside the wake reveals also that the thermal stratification of the incoming wind considerably affects the magnitude and spatial distribution of the turbulent production, transport term and dissipation rate (transfer of energy to the subgrid scales). It is also shown that the near-wake region can be extended to a farther distance downstream in stable condition compared with neutral and unstable counterparts. In order to isolate the effect of atmospheric stability, additional simulations of neutrally-stratified atmospheric boundary layers are performed with the same turbulence intensity at hub height as convective and stable ones. The results show that the

  3. Evaluation of microwave oven heating for prediction of drug-excipient compatibilities and accelerated stability studies

    DEFF Research Database (Denmark)

    Schou-Pedersen, Anne Marie V; Østergaard, Jesper; Cornett, Claus

    2015-01-01

    , if a microwave oven is applicable for accelerated drug stability testing. Chemical interactions were investigated in three selected model formulations of drug and excipients regarding the formation of ester and amide reaction products. The accelerated stability studies performed in the microwave oven using...... a design of experiments (DoE) approach in order to be able to rank excipients regarding reactivity: Study A: cetirizine with PEG 400, sorbitol, glycerol and propylene glycol. Study B: 6-aminocaproic acid with citrate, acetate, tartrate and gluconate. Study C: atenolol with citric, tartaric, malic, glutaric......, and sorbic acid. The model formulations were representative for oral solutions (co-solvents), parenteral solutions (buffer species) and solid dosage forms (organic acids applicable for solubility enhancement). The DoE studies showed overall that the same impurities were generated by microwave oven heating...

  4. 我国东部沿海地区旅游环境相对承载力研究%THE STUDY ON THE RELATIVE CARRYING CAPACITY OF TOURISM ENVIRONMENT IN EASTERN COASTAL REGIONS IN CHINA

    Institute of Scientific and Technical Information of China (English)

    张广海; 刘佳

    2009-01-01

    Through evaluating on tourism environmental carrying capacity including the relative carrying capacity of tourism resources and the relative carrying capacity of tourism economy, in order to making disscussion on the sustainable development among tourism resources and tourist capacity and tourism economy, which providing a new study idea and study method for tourism environmental carrying capacity.Compared to nationwide, the whole the relative carrying capacity of tourism resources and tourism economy are extremly strong, it is in under the carrying capacitiy of tourism environment and carrying capacity potental is lalent, however, the relative carrying capacities of tourism environment in different provinces are different, regional disparities are so obvious. Therefore, the Coordinated and orderd development of tourism industry should be strengthened,in order to putting comprehensive development level of tourism industry and the whole carrying capacity of tourism envinronment.%选取旅游资源综合丰度和旅游经济指标,对旅游环境系统的承载状况和承载潜力进行定量测算,以探讨区域旅游资源开发与旅游经济发展水平之间的相互关系.研究表明,相对于全国而言,东部沿海地区整体旅游资源环境相对承载能力和旅游经济环境相对承载能力较强,处于弱载状态,具有一定的承载潜力,其中旅游环境相对承载力具有明显的地域差异,应加强各省市旅游业的协调有序发展,以提高东部沿海旅游环境整体承载力,进一步推动沿海发达地区旅游业的综合发展.

  5. Construction of expression vectors carrying mouse peroxisomal ...

    African Journals Online (AJOL)

    The aim of this study was to construct expression vectors carrying mouse peroxisomal protein gene (PEP-cDNA) in prokaryotic and mammalian expression vectors in ... pGEX6p2-PEP and pUcD3-FLAG-PEP constructed vectors were transformed into the one shot TOP10 and JM105 bacterial competent cells, respectively.

  6. Construction of expression vectors carrying mouse peroxisomal ...

    African Journals Online (AJOL)

    PRECIOUS

    2009-11-16

    Nov 16, 2009 ... The aim of this study was to construct expression vectors carrying mouse peroxisomal protein gene. (PEP-cDNA) in prokaryotic and mammalian expression vectors in chimeric cDNA types, encompassing. GST and FLAG with PEP-cDNA. PEP-cDNA was sub-cloned in pGEX6p2 prokaryotic expression ...

  7. Stability studies of endocrine disrupting tributyltin and triphenyltin compounds in an artificial sea water model.

    Science.gov (United States)

    Novotny, Ladislav; Sharaf, Leyla; Abdel-Hamid, Mohammed E; Brtko, Julius

    2018-01-01

    Triorganotins belong to toxic components present predominantly in antifouling paints for marine vessels. Tributyltin/triphenyltin at pico- or nanomolar concentrations in sea water are known to induce an irreversible sexual abnormality in females of over 190 marine species, an "imposex" phenomenon - the superimposition of male genitalia on a female. Moreover, trialkyltins and triaryltins function as potent nuclear retinoid X receptors (RXR) agonists. In mammals, triorganotin compounds induce immunosuppressive, metabolic, reproductive or developmental effects. Toxic effects of triorganotins warrant the need for monitoring of their long-lasting presence in the environment. This study brings novel data on the stability of two triorganotin compounds in artificial sea water model obtained by applying ultra-pressure liquid chromatography (UPLC) and gas chromatography-mass spectrometry (GC-MS) methods. Stability of tributyltin and triphenyltin chlorides was studied for 180 days and the degradation kinetic parameters were obtained. Tributyltin chloride was the less stable with the degradation kinetic parameters Kdeg = 0.00014 day-1 and t1/2 = 4950 days (13.6 years). Kdeg of the more stable triphenyltin chloride was determined to be Kdeg = 0.00006 day-1 with t1/2 = 11550 days (31.6 years). Since similar stability data of triorganotin compounds were not published previously, we report high stability for both tested compounds, which indicates a significant environmental problem when these substances enter sea water and later coastal sediments.

  8. Thermogravimetric studies of the thermo-oxidative stability of irradiated and unirradiated polyethylene

    International Nuclear Information System (INIS)

    Novakovic, L.; Gal, O.; Markovic, V.; Stannett, V.T.

    1985-01-01

    In part one of this series the effects of a phenolic, an amine and a thioester antioxidant on the thermo-oxidative stability of irradiated and unirradiated low-density polyethylene was reported. In this paper the effects of combined phenolic and thioester stabilizers are described. Isothermal thermogravimetric analysis was used to study the systems. Pronounced synergism was observed with the induction periods, the time when the initial weight loss begins and the 5% weight loss. At about 50% of each stabilizer increases greater than twofold were observed both with the unirradiated and irradiated polymers. The rate constants for oxygen uptake were decreased. However, the rates of degradation at 5% weight loss fell between the values of the two pure stabilizers with no pronounced synergism in either case. In the absence of oxygen little effect of either antioxidant or their mixtures was observed. The corresponding activation energies were somewhat higher, however, with the irradiated samples containing antioxidants. Dynamic thermogravimetry was used for this study. A kinetic analysis indicated that there were somewhat different modes of degradation at lower- and higher-temperature ranges. (author)

  9. Thermogravimetric studies of the thermo-oxidative stability of irradiated and unirradiated polyethylene. 2. Combined antioxidants

    Energy Technology Data Exchange (ETDEWEB)

    Novakovic, L; Gal, O; Markovic, V; Stannett, V T

    1985-01-01

    In part one of this series the effects of a phenolic, an amine and a thioester antioxidant on the thermo-oxidative stability of irradiated and unirradiated low-density polyethylene was reported. In this paper the effects of combined phenolic and thioester stabilizers are described. Isothermal thermogravimetric analysis was used to study the systems. Pronounced synergism was observed with the induction periods, the time when the initial weight loss begins and the 5% weight loss. At about 50% of each stabilizer increases greater than twofold were observed both with the unirradiated and irradiated polymers. The rate constants for oxygen uptake were decreased. However, the rates of degradation at 5% weight loss fell between the values of the two pure stabilizers with no pronounced synergism in either case. In the absence of oxygen little effect of either antioxidant or their mixtures was observed. The corresponding activation energies were somewhat higher, however, with the irradiated samples containing antioxidants. Dynamic thermogravimetry was used for this study. A kinetic analysis indicated that there were somewhat different modes of degradation at lower- and higher-temperature ranges. (author).

  10. Sol-gel reaction stability studied: Influence in the formation temperature and properties of ferroelectric thin films

    International Nuclear Information System (INIS)

    Perez, J.; Vilarinho, P.M.; Kholkin, A.L.; Almeida, A.

    2009-01-01

    Lead zirconium titanate (PZT) sol-gel solutions were prepared based on distilled lead acetate precursor solutions. A detailed analysis of the distillation effect on the lead precursor and the final PZT solution were carried out by Infrared and Raman techniques. It was found that the increase in the number of distillation steps experienced by the lead precursor solutions removes the constitutional water and increases the lead acetate-2-methoxyethanol interconnectivity; thus improving stability and avoiding the aging effect of the resulting PZT solutions. The thermal decomposition process of the PZT solutions was analyzed based on the thermogravimetric (TG) and differential thermogravimetric analysis (DTA) measurements. It was found that as the number of distillation steps in the lead precursor solutions increases, the decomposition rate increases and the formation temperature of pure perovskite PZT films decreases. X-ray diffraction (XRD) technique was used to study the film phase formation. A pure perovskite phase at 500 deg. C was found by the XRD analysis after the second distillation step. Scanning electron microscope technique was used to carry out the microstructural analysis. Dense microstructure was found in all analyzed films and an incipient columnar grain growth was revealed in PZT films prepared based on lead precursor solution with more than three distillation steps. The dependence of the dielectric, ferroelectric and piezoelectric properties on the number of distillation steps was revealed and a correlation between the distillation process, film microstructure properties and electrical performance was established

  11. A Comparative Study on Controllers for Improving Transient Stability of DFIG Wind Turbines During Large Disturbances

    Directory of Open Access Journals (Sweden)

    Minh Quan Duong

    2018-02-01

    Full Text Available Under power system short-circuits, the Doubly-Fed Induction Generator (DFIG Wind Turbines (WT are required to be equipped with crowbar protections to preserve the lifetime of power electronics devices. When the crowbar is switched on, the rotor windings are short-circuited. In this case, the DFIG behaves like a squirrel-cage induction generator (SCIG and can adsorb reactive power, which can affect the power system. A DFIG based-fault-ride through (FRT scheme with crowbar, rotor-side and grid-side converters has recently been proposed for improving the transient stability: in particular, a hybrid cascade Fuzzy-PI-based controlling technique has been demonstrated to be able to control the Insulated Gate Bipolar Transistor (IGBT based frequency converter in order to enhance the transient stability. The performance of this hybrid control scheme is analyzed here and compared to other techniques, under a three-phase fault condition on a single machine connected to the grid. In particular, the transient operation of the system is investigated by comparing the performance of the hybrid system with conventional proportional-integral and fuzzy logic controller, respectively. The system validation is carried out in Simulink, confirming the effectiveness of the coordinated advanced fuzzy logic control.

  12. Study of Running Stability in Side-Suspended HTS-PMG Maglev Circular Line System

    Science.gov (United States)

    Zhou, Dajin; Zhao, Lifeng; Li, Linbo; Cui, Chenyu; Hsieh, Chang-Chun; Zhang, Yong; Guo, Jianqiang; Zhao, Yong

    2017-07-01

    A research on stability of the side-suspended HTS-PMG maglev circular line system is carried out through simulation experiment. The results show that the maglev vehicle will gradually get close to the track surface during acceleration under the action of centrifugal force, leading to decay of guidance force and occurrence of vertical eccentric motion. In case of linear array of YBa2Cu3O7-x (YBCO) bulks, the guidance force will be changed with the decreasing of the levitation gap. It can be suppressed through the complex arrangement of YBCO bulks. Fortunately, triangle array of YBCO bulks can effectively keep the guidance force constant and realize stable running during accelerating process of the prototype vehicle. Based on the research on stability of side-suspended maglev vehicle, a side-suspended PMG circular test track with diameter of 6.5 m and circumference of 20.4 m is successfully designed and established, enabling the prototype vehicle to run stably at up to 82.5 km/h under open atmosphere (9.6 × 104 Pa).

  13. An Orbital Stability Study of the Proposed Companions of SW Lyncis

    Directory of Open Access Journals (Sweden)

    T. C. Hinse

    2014-09-01

    Full Text Available We have investigated the dynamical stability of the proposed companions orbiting the Algol type short-period eclipsing binary SW Lyncis (Kim et al. 2010. The two candidate companions are of stellar to substellar nature, and were inferred from timing measurements of the system’s primary and secondary eclipses. We applied well-tested numerical techniques to accurately integrate the orbits of the two companions and to test for chaotic dynamical behavior. We carried out the stability analysis within a systematic parameter survey varying both the geometries and orientation of the orbits of the companions, as well as their masses. In all our numerical integrations we found that the proposed SW Lyn multi-body system is highly unstable on time-scales on the order of 1000 years. Our results cast doubt on the interpretation that the timing variations are caused by two companions. This work demonstrates that a straightforward dynamical analysis can help to test whether a best-fit companion-based model is a physically viable explanation for measured eclipse timing variations. We conclude that dynamical considerations reveal that the proposed SW Lyncis multi-body system most likely does not exist or the companions have significantly different orbital properties from those conjectured in Kim et al. (2010.

  14. Tunable release of clavam from clavam stabilized gold nanoparticles — Design, characterization and antimicrobial study

    Energy Technology Data Exchange (ETDEWEB)

    Manju, V. [Electrodics and Electrocatalysis Division, CSIR-Central Electrochemical Research Institute, Karaikudi, Tamilnadu 630006 (India); Dhandapani, P. [Corrosion Materials and Protection Division, CSIR-Central Electrochemical Research Institute, Karaikudi, Tamilnadu, 630006 (India); Gurusamy Neelavannan, M. [Characterization and Measurement lab, CSIR-Central Electrochemical Research Institute, Karaikudi, Tamilnadu 630006 (India); Maruthamuthu, S. [Corrosion Materials and Protection Division, CSIR-Central Electrochemical Research Institute, Karaikudi, Tamilnadu, 630006 (India); Berchmans, S. [Electrodics and Electrocatalysis Division, CSIR-Central Electrochemical Research Institute, Karaikudi, Tamilnadu 630006 (India); Palaniappan, A., E-mail: palani112@gmail.com [Electrodics and Electrocatalysis Division, CSIR-Central Electrochemical Research Institute, Karaikudi, Tamilnadu 630006 (India)

    2015-04-01

    A facile one-step approach is developed to synthesize highly stable (up to 6 months) gold nanoparticles (GNPs) using Clavam, pharmaceutical form of amoxicillin which contains a mixture of amoxicillin and potassium salt of clavulanic acid, at room temperature (25–30 °C). The clavam stabilized GNPs are characterized using various techniques including UV–Visible, FT-IR spectrophotometry and transmission electron microscopy (TEM). Tunable release of clavam from clavam stabilized GNPs is demonstrated using intracellular concentrations of glutathione (GSH). The process is monitored using an UV–Vis spectroscopy and the amount of clavam released in terms of amoxicillin concentration is quantitatively estimated using reverse phase high performance liquid chromatographic (RP-HPLC) technique. In vitro study reveals that the clavam released from GNPs' surface was found to show a significant enhancement in antibacterial activity against Escherichia coli and the cause of enhancement is addressed. - Graphical abstract: Stable and nearly monodisperse gold nanoparticles (GNPs) are prepared at room temperature (~ 25–30 °C) using clavam; commercial form of amoxicillin antibiotic. Tunable release of clavam from clavam stabilized GNPs is demonstrated by the addition of varying concentrations of glutathione. Interactions between clavam and gold core are investigated in detail. The mechanism of enhanced antimicrobial activity of clavam released from clavam stabilized GNPs is probed. - Highlights: • Gold nanoparticles (GNPs) are prepared without reducing agent using antibiotic clavam{sup TR}. • Our work shed lights on the nature of interaction between the clavam and GNPs. • Sustained release of clavam from clavam stabilized GNPs is demonstrated using glutathione. • Antimicrobial activity of the released clavam is confirmed using various techniques. • Our study suggests that the clavam released from GNPs shows better inhibition of E. coli.

  15. Stability Study of Sunscreens with Free and Encapsulated UV Filters Contained in Plastic Packaging.

    Science.gov (United States)

    Briasco, Benedetta; Capra, Priscilla; Mannucci, Barbara; Perugini, Paola

    2017-05-31

    Sunscreens play a fundamental role in skin cancer prevention and in protection against photo-aging. UV filters are often photo-unstable, especially in relation to their vehicles and, being lipophilic substances, they are able to interact with plastic packaging. Finally, UV filter stability can be significantly affected by the routine use of the product at high temperatures. This work aims to study the stability of sunscreen formulations in polyethylene packaging. Butyl methoxydibenzoylmethane and octocrylene, both in a free form and as encapsulated filters were chosen as UV filters. Stability evaluations were performed both in the packaging and on the formulations. Moreover, a further two non-destructive techniques, near-infrared (NIR) spectroscopy and a multiple light scattering technique, were also used to evaluate the stability of the formulation. Results demonstrated clearly that all of the pack underwent significant changes in its elastic/plastic behavior and in external color after solar irradiation. From the evaluation of the extractable profile of untreated and treated packaging material an absorption of 2-phenoxyethanol and octocrylene were shown. In conclusion, the results highlighted clearly that a reduction of the UV filter in the formulation packed in high-density polyethylene/low-density polyethylene (HDPE/LDPE) material can occur over time, reducing the protective effect of the product when applied to the skin.

  16. Simulation for transient stability study of the Taiwan power system - a nuclear majority system

    International Nuclear Information System (INIS)

    Huang, J.C.C.

    1984-01-01

    A transient stability program was developed for the Taiwan Power Company, which has a high proportion of nuclear generation in its power system. This program offers a new territory to investigate nuclear plant effects on the power system transient stability. This program also provides a high speed tool for the Taipower system operational planning. A generalized procedure of synchronous machine modeling for a large-scale stability study is presented. The merits and weaknesses of machine modeling can be comprehended through each item of this procedure. Three types of nonlinear synchronous machine modeling implemented into this stability program are derived by following this procedure. A robust subroutine was derived to perform the fourth order Runge-Kutta integration method, making the software programming neat and systematical. For simulating the nuclear plant influence on the system, this program implemented an additional four functions: load-limit operation simulated by a low-value gate in the governor model, bypass valve capacity monitored by sending out a warning message, rotor overspeed protection relay, and generator anti-motoring relay

  17. A case study of multi-seam coal mine entry stability analysis with strength reduction method.

    Science.gov (United States)

    Tulu, Ihsan Berk; Esterhuizen, Gabriel S; Klemetti, Ted; Murphy, Michael M; Sumner, James; Sloan, Michael

    2016-03-01

    In this paper, the advantage of using numerical models with the strength reduction method (SRM) to evaluate entry stability in complex multiple-seam conditions is demonstrated. A coal mine under variable topography from the Central Appalachian region is used as a case study. At this mine, unexpected roof conditions were encountered during development below previously mined panels. Stress mapping and observation of ground conditions were used to quantify the success of entry support systems in three room-and-pillar panels. Numerical model analyses were initially conducted to estimate the stresses induced by the multiple-seam mining at the locations of the affected entries. The SRM was used to quantify the stability factor of the supported roof of the entries at selected locations. The SRM-calculated stability factors were compared with observations made during the site visits, and the results demonstrate that the SRM adequately identifies the unexpected roof conditions in this complex case. It is concluded that the SRM can be used to effectively evaluate the likely success of roof supports and the stability condition of entries in coal mines.

  18. A Pilot Chemical and Physical Stability Study of Extemporaneously Compounded Levetiracetam Intravenous Solution.

    Science.gov (United States)

    Raphael, Chenzira D; Zhao, Fang; Hughes, Susan E; Juba, Katherine M

    2015-01-01

    Levetiracetam is a commonly used antiepileptic medication for tumor-related epilepsy. However, the 100 mL intravenous (IV) infusion volume can be burdensome to imminently dying hospice patients. A reduced infusion volume would improve patient tolerability. The purpose of this study was to evaluate the stability of 1000 mg/25 mL (40 mg/mL) levetiracetam IV solution in sodium chloride 0.9%. We prepared levetiracetam 40 mg/mL IV solution and added it to polyvinyl chloride (PVC) bags, polyolefin bags, and polypropylene syringes. Triplicate samples of each product were stored at refrigeration (2-8°C) and analyzed on days 0, 1, 4, 7, and 14. Samples were subjected to visual inspection, pH measurement, and stability-indicating high-performance liquid chromatography (HPLC) analysis. Over the 2-week storage period, there was no significant change in visual appearance or pH for any of the stability samples. The HPLC results confirmed that all stability samples retained 94.2-101.3% of initial drug concentration and no degradation products or leachable material from the packaging materials were observed. We conclude that levetiracetam 1000 mg/25 mL IV solution in sodium chloride 0.9% is physically and chemically stable for up to 14 days under refrigeration in polypropylene syringes, PVC bags, and polyolefin bags.

  19. Application of isotope-labelled compounds in the study of the chemical stability of pesticides

    International Nuclear Information System (INIS)

    Roesseler, M.; Luther, D.; Abendroth, H.C.; Koch, H.

    1980-01-01

    The user of pesticides requires specific biological modes of action from the corresponding commercial products. Impurities and degradation products may cause uncontrollable toxicological reactions. Profound knowledge of the chemical stability of the effective substance in question and its formulations under storage conditions as well as under those of analytical sample preparation and detection is required. Radioisotope labelled effective substances dimethoate and 1-butyl-amino-cyclohexane-phosphonic acid dibutyl ester are used to study storage stability of the pure effective substance and its formulations; effects of selected impurities, such as technical by-products, moisture or water content, binding or carrier materials, organic solvents, chemical stabilizers and other formulation components on storage properties; temperature dependence of storage stability; selection of suitable analytical techniques for quantitative determination of the effective substance without interference effects from any by-product; reduction of the necessary analytical expense; disclosure of sources of error in the application of usual analytical techniques; improvement of possibilities of an immediate and clearer discrimination between types and amounts of compounds in a chemical system consisting of one pesticide and its degradation or reaction products at the beginning and at the end of an experimental or reaction period. Radiochemical analytical techniques, such as radio thin-layer chromatography (also combined with liquid scintillation counting), radio gas chromatography, autoradiography and isotope dilution analysis were used. Results are discussed, especially of experiments on dimethoate and its technical by-products

  20. Experimental and computational study on the phase stability of Al-containing cubic transition metal nitrides

    International Nuclear Information System (INIS)

    Rovere, Florian; Mayrhofer, Paul H; Music, Denis; Ershov, Sergey; Baben, Moritz to; Schneider, Jochen M; Fuss, Hans-Gerd

    2010-01-01

    The phase stability of Al-containing cubic transition metal (TM) nitrides, where Al substitutes for TM (i.e. TM 1-x Al x N), is studied as a function of the TM valence electron concentration (VEC). X-ray diffraction and thermal analyses data of magnetron sputtered Ti 1-x Al x N, V 1-x Al x N and Cr 1-x Al x N films indicate increasing phase stability of cubic TM 1-x Al x N at larger Al contents and higher temperatures with increasing TM VEC. These experimental findings can be understood based on first principle investigations of ternary cubic TM 1-x Al x N with TM = Sc, Ti, V, Cr, Y, Zr and Nb where the TM VEC and the lattice strain are systematically varied. However, our experimental data indicate that, in addition to the decomposition energetics (cubic TM 1-x Al x N → cubic TMN + hexagonal AlN), future stability models have to include nitrogen release as one of the mechanisms that critically determine the overall phase stability of TM 1-x Al x N.

  1. Study of locations’characteristics for stabilization of street vendors in Surakarta City

    Science.gov (United States)

    Rahayu, M. J.; Buchori, I.; Widjajanti, R.

    2018-01-01

    Street vendors are usually centered around particular areas where they have made adaptations based on their activities, instead of scattered all over the city. These locations tend to be close to street vendors’ primary activities and consumers, occupy the public lands, and are productive and accessible. The Municipality of Surakarta has managed the street vendors in the form of stabilization and relocation. In Surakarta, there are 24 areas used for stabilization of street vendors varying in characteristics and quantities. This study uses a spatial analysis aiming to explain the characteristics of locations used for stabilization of street vendors and to identify their physical condition and arrangement. Furthermore, all of the research results will be used as the criteria in choosing the new locations that are suitable for the street vendors’ characteristics and consumers’ preference. The results show that the locations are on the roadsides of the neighborhood, local, and secondary collector roads. The traffic conditions in the stabilization areas are ranging from the very busy until relatively busy level since they are close to activities for trade, education, recreation, offices, and settlements.

  2. A Pilot Stability Study of Dehydroepiandrosterone Rapid-dissolving Tablets Prepared by Extemporaneous Compounding.

    Science.gov (United States)

    Rush, Steven D; Vernak, Charlene; Zhao, Fang

    2017-01-01

    Dehydroepiandrosterone supplementation is used to treat a variety of conditions. Rapid-dissolving tablets are a relatively novel choice for compounded dehydroepiandrosterone dosage forms. While rapid-dissolving tablets offer ease of administration, there are uncertainties about the physical and chemical stability of the drug and dosage form during preparation and over long-term storage. This study was designed to evaluate the stability of dehydroepiandrosterone rapid-dissolving tablets just after preparation and over six months of storage. The Professional Compounding Centers of America rapid-dissolving tablet mold and base formula were used to prepare 10-mg strength dehydroepiandrosterone rapid-dissolving tablets. The formulation was heated at 100°C to 110°C for 30 minutes, released from the mold, and cooled at room temperature for 30 minutes. The resulting rapid-dissolving tablets were individually packaged in amber blister packs and stored in a stability chamber maintained at 25°C and 60% relative humidity. The stability samples were pulled at pre-determined time points for evaluation, which included visual inspection, tablet weight check, United States Pharmacopeia disintegration test, and stability-indicating high-performance liquid chromatography. The freshly prepared dehydroepiandrosterone rapiddissolving tablets exhibited satisfactory chemical and physical stability. Time 0 samples disintegrated within 40 seconds in water kept at 37°C. The high-performance liquid chromatographic results confirmed that the initial potency was 101.9% of label claim and that there was no chemical degradation from the heating procedure. Over six months of storage, there were no significant changes in visual appearance, physical integrity, or disintegration time for any of the stability samples. The high-performance liquid chromatographic results also indicated that dehydroepiandrosterone rapid-dissolving tablets retained >95% label claim with no detectable degradation

  3. Motion stability of high-speed maglev systems in consideration of aerodynamic effects: a study of a single magnetic suspension system

    Science.gov (United States)

    Wu, Han; Zeng, Xiao-Hui; Yu, Yang

    2017-12-01

    In this study, the intrinsic mechanism of aerodynamic effects on the motion stability of a high-speed maglev system was investigated. The concept of a critical speed for maglev vehicles considering the aerodynamic effect is proposed. The study was carried out based on a single magnetic suspension system, which is convenient for proposing relevant concepts and obtaining explicit expressions. This study shows that the motion stability of the suspension system is closely related to the vehicle speed when aerodynamic effects are considered. With increases of the vehicle speed, the stability behavior of the system changes. At a certain vehicle speed, the stability of the system reaches a critical state, followed by instability. The speed corresponding to the critical state is the critical speed. Analysis reveals that when the system reaches the critical state, it takes two forms, with two critical speeds, and thus two expressions for the critical speed are obtained. The conditions of the existence of the critical speed were determined, and the effects of the control parameters and the lift coefficient on the critical speed were analyzed by numerical analysis. The results show that the first critical speed appears when the aerodynamic force is upward, and the second critical speed appears when the aerodynamic force is downward. Moreover, both critical speeds decrease with the increase of the lift coefficient.

  4. Network structure and thermal stability study of high temperature seal glass

    Science.gov (United States)

    Lu, K.; Mahapatra, M. K.

    2008-10-01

    High temperature seal glass has stringent requirement on glass thermal stability, which is dictated by glass network structures. In this study, a SrO-La2O3-Al2O3-B2O3-SiO2 based glass system was studied using nuclear magnetic resonance, Raman spectroscopy, and x-ray diffraction for solid oxide cell application purpose. Glass structural unit neighboring environment and local ordering were evaluated. Glass network connectivity as well as silicon and boron glass former coordination were calculated for different B2O3:SiO2 ratios. Thermal stability of the borosilicate glasses was studied after thermal treatment at 850 °C. The study shows that high B2O3 content induces BO4 and SiO4 structural unit ordering, increases glass localized inhomogeneity, decreases glass network connectivity, and causes devitrification. Glass modifiers interact with either silicon- or boron-containing structural units and form different devitrified phases at different B2O3:SiO2 ratios. B2O3-free glass shows the best thermal stability among the studied compositions, remaining stable after thermal treatment for 200 h at 850 °C.

  5. Methods study of homogeneity and stability test from cerium oxide CRM candidate

    International Nuclear Information System (INIS)

    Samin; Susanna TS

    2016-01-01

    The methods study of homogeneity and stability test from cerium oxide CRM candidate has been studied based on ISO 13258 and KAN DP. 01. 34. The purpose of this study was to select the test method homogeneity and stability tough on making CRM cerium oxide. Prepared 10 sub samples of cerium oxide randomly selected types of analytes which represent two compounds, namely CeO_2 and La_2O_3. At 10 sub sample is analyzed CeO_2 and La_2O_3 contents in duplicate with the same analytical methods, by the same analyst, and in the same laboratory. Data analysis results calculated statistically based on ISO 13528 and KAN DP.01.34. According to ISO 13528 Cerium Oxide samples said to be homogeneous if Ss ≤ 0.3 σ and is stable if | Xr – Yr | ≤ 0.3 σ. In this study, the data of homogeneity test obtained CeO_2 is Ss = 2.073 x 10-4 smaller than 0.3 σ (0.5476) and the stability test obtained | Xr - Yr | = 0.225 and the price is < 0.3 σ. Whereas for La_2O_3, the price for homogeneity test obtained Ss = 1.649 x 10-4 smaller than 0.3 σ (0.4865) and test the stability of the price obtained | Xr - Yr | = 0.2185 where the price is < 0.3 σ. Compared with the method from KAN, a sample of cerium oxide has also been homogenized for Fcalc < Ftable and stable, because | Xi - Xhm | < 0.3 x n IQR. Provided that the results of the evaluation homogeneity and stability test from CeO_2 CRM candidate test data were processed using statistical methods ISO 13528 is not significantly different with statistical methods from KAN DP.01.34, which together meet the requirements of a homogeneous and stable. So the test method homogeneity and stability test based on ISO 13528 can be used to make CRM cerium oxide. (author)

  6. Influence of extracellular matrix coatings on implant stability and osseointegration: an animal study.

    Science.gov (United States)

    Stadlinger, Bernd; Pilling, Eckart; Huhle, Matthias; Mai, Ronald; Bierbaum, Susanne; Bernhardt, Ricardo; Scharnweber, Dieter; Kuhlisch, Eberhard; Hempel, Ute; Eckelt, Uwe

    2007-10-01

    Aim of the present study was to test the hypothesis that the application of components of the extracellular matrix such as glycosaminoglycans used as implant surface coatings in combination with collagen, with and without growth factor, can lead to enhanced ossification and thus improve implant stability compared with collagen coatings alone. Twenty miniature pigs received 120 experimental titanium implants in the mandible. Three types of surface coatings were created: (1) collagen type I (coll), (2) collagen type I/chondroitin sulphate (coll/CS), (3) collagen type I/chondroitin sulphate/BMP-4 (coll/CS/BMP). Periimplant bone formation was assessed within a defined recess along the length axis of the implant. Bone-implant contact (BIC) and bone volume density (BVD) were determined, using both histomorphometry and synchrotron radiation micro computed tomography (SRmicroCT). To measure implant stability, resonance frequency analysis was applied after implantation and 1, 3, 7, and 22 weeks after placement. BIC was highest for coll/CS coated implants, followed by coll, p = 0.082. Histomorphometric BVD did not significantly change for any coating. SRmicroCT analysis showed an increased BVD for collagen coated implants, compared with the other two surface coatings. Implant stability showed a decrease for all coatings up to the third week. At 22 weeks, all coatings showed an increase in stability without reaching their initial level. Highest stability was reached for coll coated implants, p = 0.051. It was concluded that collagen and coll/CS implant coatings have advantageous characteristics for peri-implant bone formation, compared with the further integration of BMP-4.

  7. A Study of Strong Stability of Distributed Systems. Ph.D. Thesis

    Science.gov (United States)

    Cataltepe, Tayfun

    1989-01-01

    The strong stability of distributed systems is studied and the problem of characterizing strongly stable semigroups of operators associated with distributed systems is addressed. Main emphasis is on contractive systems. Three different approaches to characterization of strongly stable contractive semigroups are developed. The first one is an operator theoretical approach. Using the theory of dilations, it is shown that every strongly stable contractive semigroup is related to the left shift semigroup on an L(exp 2) space. Then, a decomposition for the state space which identifies strongly stable and unstable states is introduced. Based on this decomposition, conditions for a contractive semigroup to be strongly stable are obtained. Finally, extensions of Lyapunov's equation for distributed parameter systems are investigated. Sufficient conditions for weak and strong stabilities of uniformly bounded semigroups are obtained by relaxing the equivalent norm condition on the right hand side of the Lyanupov equation. These characterizations are then applied to the problem of feedback stabilization. First, it is shown via the state space decomposition that under certain conditions a contractive system (A,B) can be strongly stabilized by the feedback -B(*). Then, application of the extensions of the Lyapunov equation results in sufficient conditions for weak, strong, and exponential stabilizations of contractive systems by the feedback -B(*). Finally, it is shown that for a contractive system, the first derivative of x with respect to time = Ax + Bu (where B is any linear bounded operator), there is a related linear quadratic regulator problem and a corresponding steady state Riccati equation which always has a bounded nonnegative solution.

  8. Bone implant sockets made using three different procedures: a stability study in dogs

    Science.gov (United States)

    Campo, Julián

    2012-01-01

    Objective: This study compared the effects of three different methods of preparing bone implant sockets (drilling, osteotomes, and piezoelectric device) on osseointegration using resonance frequency analysis (RFA). Study Design: An experimental prospective study was designed. Material and Methods: Ten adult beagle dogs were studied. After 5 weeks, 23 out of 28 initially placed implants in the iliac crest were evaluated, comparing these three different procedures of bone implant socket. Student’s t-test (paired, two-tailed) was used to reveal differences among the three groups at each time point (SPSS 16.0, IL, USA). Results: After a 5-week healing period, the implants placed in sockets that were made using an osteotome or piezoelectric device were slightly more stable than those made by drilling. Reduced mechanical and heat injury to the bone is beneficial for maintaining and improving stability during the critical early healing period. Conclusion: Using RFA, there was evidence of a slight increase in implant stability in the iliac crest after 5 weeks of healing when the implant socket was made using a piezoelectric device or expansion procedure as compare with the drilling method. Key words:Bone implant sockets, drilling, osteotomes, piezoelectric, resonance frequency analysis, stability. PMID:24558558

  9. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies

    DEFF Research Database (Denmark)

    Krebs, Frederik C; Gevorgyan, Suren; Alstrup, Jan

    2009-01-01

    An inverted polymer solar cell geometry comprising a total of five layers was optimized using laboratory scale cells and the operational stability was studied under model atmospheres. The device geometry was substrate-ITO-ZnO-(active layer)-PEDOT:PSS-silver with P3HT-PCBM as the active layer. The...

  10. Study of the hydrodynamic stability of natural-circulation steam generators

    International Nuclear Information System (INIS)

    Olive, J.

    1981-01-01

    This report presents a mathematical model of a study of the stability of natural-circulation steam generators. The method used consists in linearizing the equations for the single-dimensional flow and integrating them by using Laplace's transformation. The properties of the two-phase fluids are described by a homegeneous model with slip. The results of the calculation are the transfer functions of the circulation loop and its own oscillation modes (period and damping). Comparison of the results obtained by this method with those from other existing methods in the case of a straight tube with forced flow have proved satisfactory. Lastly, the results of a parametric study on the stability of a natural-circulation steam generator for a PWR unit are presented. The results show that the model is capable of reproducing at least qualitatively the trends observed experimentally or obtained by other more complex theoretical models [fr

  11. A study on the stability of a motorcycle wheel-swingarm suspension with chain transmission

    Science.gov (United States)

    Sorrentino, S.; Leonelli, L.

    2017-11-01

    The present study describes a possible driving mechanism for a self-excited oscillation observed in motorcycle dynamics, often referred to as chatter. This phenomenon, affecting the performance of road racing motorcycles, has been simulated in straight running braking manoeuvres with multibody motorcycle models. It involves rear suspension bounce and driveline oscillation in the frequency range between 17 and 22 Hz. A simplified model of a motorcycle rear suspension with chain transmission is proposed and its stability in equilibrium configurations is studied via eigenvalue analysis. The sensitivity with respect to all its governing parameters is analysed by means of stability maps and the self-excitation mechanism is explained with the aid of energy balance analysis and phase diagrams. It is found that the key role for the instability onset is played by the gradient of the nonlinear characteristic slip function of the tyre.

  12. Synthesis and formulation studies of griseofulvin analogues with improved solubility and metabolic stability

    DEFF Research Database (Denmark)

    Petersen, Asger Bjørn; Andersen, Nikolaj Sten; Konotop, Gleb

    2017-01-01

    Griseofulvin (1) is an important antifungal agent that has recently received attention due to its antiproliferative activity in mammalian cancer cells. Comprehensive SAR studies have led to the identification of 2'-benzyloxy griseofulvin 2, a more potent analogue with low micromolar anticancer...... potency in vitro. Analogue 2 was also shown to retard tumor growth through inhibition of centrosomal clustering in murine xenograft models of colon cancer and multiple myeloma. However, similar to griseofulvin, compound 2 exhibited poor metabolic stability and aqueous solubility. In order to improve...... studies. The 2'-benzylamine analogue 10 proved to be the most promising compound with low μM in vitro anticancer potency, a 200-fold increase in PBS solubility over compound 2, and with improved metabolic stability. Furthermore, this analogue proved compatible with formulations suitable for both oral...

  13. A theoretical study of the structure and stability of borohydride on 3d transition metals

    Science.gov (United States)

    Arevalo, Ryan Lacdao; Escaño, Mary Clare Sison; Gyenge, Elod; Kasai, Hideaki

    2012-12-01

    The adsorption of borohydride on 3d transition metals (Cr, Mn, Fe, Co, Ni and Cu) was studied using first principles calculations within spin-polarized density functional theory. Magnetic effect on the stability of borohydride is noted. Molecular adsorption is favorable on Co, Ni and Cu, which is characterized by the strong s-dzz hybridization of the adsorbate-substrate states. Dissociated adsorption structure yielding one or two H adatom fragments on the surface is observed for Cr, Mn and Fe.

  14. In vitro study of color stability of polycrystalline and monocrystalline ceramic brackets

    OpenAIRE

    de Oliveira, Cibele Braga; Maia, Luiz Guilherme Martins; Santos-Pinto, Ary; Gandini J?nior, Luiz Gonzaga

    2014-01-01

    OBJECTIVE: The aim of this in vitro study was to analyze color stability of monocrystalline and polycrystalline ceramic brackets after immersion in dye solutions. METHODS: Seven ceramic brackets of four commercial brands were tested: Two monocrystalline and two polycrystalline. The brackets were immersed in four dye solutions (coffee, red wine, Coke and black tea) and in artificial saliva for the following times: 24 hours, 7, 14 and 21 days, respectively. Color changes were measured by a...

  15. Studies on 99mTc-DMSA samples: some results concerning stability in time

    International Nuclear Information System (INIS)

    Metello, L.F.; Cunha, L.; Veiga, J.; Gomes, C.; Botelho, M.F.

    2002-01-01

    Aim: It has been decided to study the stability period of the 99mTc-DMSA after the advent of unclear situations, where this radiopharmaceutical was administered in a distant moment related to the preparation time, and also because of some rare imagiological findings, not exactly predictable and/or compatible when considering their relations with the specific clinical environment, even if it was happening clearly inside the stability time given as reference by the producer of the radiopharmaceutical. The first thing to be found was that the concerned information in current bibliography is quite uncertain, some authors defending kits stability in time from half hour till six hours and with most authors making reference to half hour, which clearly and obviously contradicts the literature furnished with the kits, that usually refers stability periods between four and six hours. Methods and Conclusions: As developed methodology, it was decided to establish and use a Quality Control Program, consisting on running in parallel the three specific methods indicated to study this radiopharmaceutical properties and purity, over the time, starting on the fifth minute after completion of the kits and going until a maximum of eight hours after this moment, having always previously studied the radiochemical purity of the 99mTc-eluate being used. In the development of this study, we used several lyophilised formulations, from distinct producers. We easily arrived to the conclusion that, if the free pertechnetate and the colloidal technetium remains more or less stable on his relative amount over the time, the relative amounts concerning the DMSA III (oxidation state III) and the DMSA V (oxidation state V) are quite distinct from the expected and described on the literature, putting once again in evidence the urgent need to implement Quality Control as a indispensable part of the each day routine on a Nuclear Medicine Department

  16. Effect of implant macro-design on primary stability: A prospective clinical study

    OpenAIRE

    Lozano-Carrascal, Naroa; Salom?-Coll, Oscar; Gilabert-Cerd?, Marta; Farr?-Pag?s, Nuria; Gargallo-Albiol, Jordi; Hern?ndez-Alfaro, Federico

    2016-01-01

    Background Implant restorations have become a high predictable treatment option. Several caracteristics such as surgical technique and implant design can influence the treatment outcomes. The aim of the present study was to evaluate the influence of implant macro-design on primary stability measured with resonance frequency analysis (RFA) and insertion torque (IT). Material and Methods A total of 47 implants divided in two groups: Test group (TI): 22 Tapered MIS? Seven implants; Control group...

  17. Positron annihilation study of yttria-stabilized zirconia nanopowders containing Cr2O3 additive

    International Nuclear Information System (INIS)

    Prochazka, I; Cizek, J; Melikhova, O; Kuriplach, J; Konstantinova, T E; Danilenko, I A

    2011-01-01

    Yttria-stabilized zirconia compacted nanopowders, doped with trivalent chromium oxide, were studied by means of high-resolution positron lifetime and coincidence Doppler broadening techniques. The observed data suggest that positrons annihilate mainly in vacancylike defects at grain boundaries or in larger open volumes most likely located at triple points. The results also show that an addition of Cr 2 O 3 leads to a decrease in grain size.

  18. Glycation of polyclonal IgGs: Effect of sugar excipients during stability studies.

    Science.gov (United States)

    Leblanc, Y; Bihoreau, N; Jube, M; Andre, M-H; Tellier, Z; Chevreux, G

    2016-05-01

    A number of intravenous immunoglobulin preparations are stabilized with sugar additives that may lead over time to undesirable glycation reactions especially in liquid formulation. This study aimed to evaluate the reactivity of sugar excipients on such preparations in condition of temperature, formulation and concentration commonly used for pharmaceutical products. Through an innovative LC-MS method reported to characterize post-translational modifications of IgGs Fc/2 fragments, a stability study of IVIg formulated with reducing and non-reducing sugars has been undertaken. The rate of polyclonal IgGs glycation was investigated during 6months at 5, 25, 30 and 40°C. High levels of glycation were observed with reducing sugars such as glucose and maltose in the first months of the stability study from 25°C. Non-reducing sugars presented a low reactivity even at the highest tested temperature (40°C). Furthermore, a site by site analysis was performed by MS/MS to determine the glycation sites which were mainly identified at Lys246, Lys248 and Lys324. This work points out the high probability of glycation reactions in some commercialized products and describes a useful method to characterize IVIg glycated products issued from reducing sugar excipients. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

  19. Factors affecting financial stability of small and medium enterprises: A case study of emerging markets

    Directory of Open Access Journals (Sweden)

    Nonhlanhla Mbatha

    2017-02-01

    Full Text Available Small and Medium Enterprises (SMEs play a significant role in the South African economy as they provide job opportunities to communities and contribute to the South African gross domestic product. However, the majority of small businesses lack financial skills, which results in the falsification of financial information and analysis and inaccurate financial reports leading to decline of confidence by investors and negative impact on stakeholders. Therefore, this study examines the critical factors that affect SME’s financial stability which in the long run result in the liquidation of SMEs. The study was descriptive and quantitative in nature, using questionnaires to collect data from a sample of one hundred and twenty (120 SMEs across the Durban area. The findings show that lack of understanding of financial reporting has a negative impact on the financial stability of the business. Also the lack of insufficient financial experience proved to have a negative impact on the financial stability of SMEs. The study recommends that a short accounting programme should be developed by government incubators to assist and provide owners and accounts staff of SMEs with practical experience in financial reporting in order to increase their level of understanding financial reporting processes.

  20. Stacking stability of MoS2 bilayer: An ab initio study

    International Nuclear Information System (INIS)

    Tao Peng; Guo Huai-Hong; Yang Teng; Zhang Zhi-Dong

    2014-01-01

    The study of the stacking stability of bilayer MoS 2 is essential since a bilayer has exhibited advantages over single layer MoS 2 in many aspects for nanoelectronic applications. We explored the relative stability, optimal sliding path between different stacking orders of bilayer MoS 2 , and (especially) the effect of inter-layer stress, by combining first-principles density functional total energy calculations and the climbing-image nudge-elastic-band (CI-NEB) method. Among five typical stacking orders, which can be categorized into two kinds (I: AA, AB and II: AA', AB', A'B), we found that stacking orders with Mo and S superposing from both layers, such as AA' and AB, is more stable than the others. With smaller computational efforts than potential energy profile searching, we can study the effect of inter-layer stress on the stacking stability. Under isobaric condition, the sliding barrier increases by a few eV/(ucGPa) from AA' to AB', compared to 0.1 eV/(ucGPa) from AB to [AB]. Moreover, we found that interlayer compressive stress can help enhance the transport properties of AA'. This study can help understand why inter-layer stress by dielectric gating materials can be an effective means to improving MoS 2 on nanoelectronic applications. (condensed matter: structural, mechanical, and thermal properties)

  1. Importance of microscopy in durability studies of solidified and stabilized contaminated soils

    Science.gov (United States)

    Klich, I.; Wilding, L.P.; Drees, L.R.; Landa, E.R.

    1999-01-01

    Solidification/stabilization (S/S) is recognized by the U.S. EPA as a best demonstrated available technology for the containment of contaminated soils and other hazardous wastes that cannot be destroyed by chemical, thermal, or biological means. Despite the increased use of S/S technologies, little research has been conducted on the weathering and degradation of solidified and stabilized wastes once the treated materials have been buried. Published data to verify the performance and durability of landfilled treated wastes over time are rare. In this preliminary study, optical and electron microscopy (scanning electron microscopy [SEM], transmission electron microscopy [TEM] and electron probe microanalyses [EPMA]) were used to evaluate weathering features associated with metal-bearing contaminated soil that had been solidified and stabilized with Portland cement and subsequently buried on site, stored outdoors aboveground, or achieved in a laboratory warehouse for up to 6 yr. Physical and chemical alteration processes identified include: freeze-thaw cracking, cracking caused by the formation of expansive minerals such as ettringite, carbonation, and the movement of metals from waste aggregates into the cement micromass. Although the extent of degradation after 6 yr is considered slight to moderate, results of this study show that the same environmental concerns that affect the durability of concrete must be considered when evaluating the durability and permanence of the solidification and stabilization of contaminated soils with cement. In addition, such evaluations cannot be based on leaching and chemical analyses alone. The use of all levels of microscopic analyses must be incorporated into studies of the long-term performance of S/S technologies.Solidification/stabilization (S/S) is recognized by the U.S. EPA as a best demonstrated available technology for the containment of contaminated soils and other hazardous wastes that cannot be destroyed by chemical

  2. Emotional and cognitive experiences during the time of diagnosis and decision-making following a prenatal diagnosis : a qualitative study of males presented with congenital heart defect in the fetus carried by their pregnant partner

    OpenAIRE

    Carlsson, Tommy; Mattsson, Elisabet

    2018-01-01

    BACKGROUND: Expectant fathers consider the second-trimester obstetric ultrasound examination as an important step towards parenthood, but are ill prepared for a detection of a fetal anomaly. Inductive research is scarce concerning their experiences and needs for support. Consequently, the aim of this study was to explore the emotional and cognitive experiences, during the time of diagnosis and decision-making, among males presented with congenital heart defect in the fetus carried by their pr...

  3. Respiratory acidosis in adolescents with anorexia nervosa hospitalized for medical stabilization: a retrospective study.

    Science.gov (United States)

    Kerem, Nogah C; Riskin, Arieh; Averin, Elvira; Srugo, Isaac; Kugelman, Amir

    2012-01-01

    To examine the effect of malnutrition due to anorexia nervosa (AN) on venous blood gases of adolescents with AN hospitalized for medical stabilization. This retrospective study included 45 adolescents with recent onset (respiratory acidosis (pH 45 mm Hg) was observed in 78% of the patients on admission and only in 35% at discharge (p = .0003). Positive correlations were found between % of weight loss and pCO(2) on admission and between BMI on admission and the delta pCO(2) during hospitalization. Mild respiratory acidosis is common in adolescents with recently diagnosed AN, hospitalized for medical stabilization. Respiratory acidosis improves with bed rest and refeeding. The clinical significance of these findings should be further evaluated. Copyright © 2011 Wiley Periodicals, Inc.

  4. In Situ Study of Thermal Stability of Copper Oxide Nanowires at Anaerobic Environment

    Directory of Open Access Journals (Sweden)

    Lihui Zhang

    2014-01-01

    Full Text Available Many metal oxides with promising electrochemical properties were developed recently. Before those metal oxides realize the use as an anode in lithium ion batteries, their thermal stability at anaerobic environment inside batteries should be clearly understood for safety. In this study, copper oxide nanowires were investigated as an example. Several kinds of in situ experiment methods including in situ optical microscopy, in situ Raman spectrum, and in situ transmission electron microscopy were adopted to fully investigate their thermal stability at anaerobic environment. Copper oxide nanowires begin to transform as copper(I oxide at about 250°C and finish at about 400°C. The phase transformation proceeds with a homogeneous nucleation.

  5. Evaluation of the influence of fluoroquinolone chemical structure on stability: forced degradation and in silico studies

    Directory of Open Access Journals (Sweden)

    André Valle de Bairros

    2018-05-01

    Full Text Available ABSTRACT Fluoroquinolones are a known antibacterial class commonly used around the world. These compounds present relative stability and they may show some adverse effects according their distinct chemical structures. The chemical hydrolysis of five fluoroquinolones was studied using alkaline and photolytic degradation aiming to observe the differences in molecular reactivity. DFT/B3LYP-6.31G* was used to assist with understanding the chemical structure degradation. Gemifloxacin underwent degradation in alkaline medium. Gemifloxacin and danofloxacin showed more degradation perceptual indices in comparison with ciprofloxacin, enrofloxacin and norfloxacin in photolytic conditions. Some structural features were observed which may influence degradation, such as the presence of five member rings attached to the quinolone ring and the electrostatic positive charges, showed in maps of potential electrostatic charges. These measurements may be used in the design of effective and more stable fluoroquinolones as well as the investigation of degradation products from stress stability assays.

  6. A Study On Dispersion Stability Of Nickel Nanoparticles Synthesized By Wire Explosion In Liquid Media

    Directory of Open Access Journals (Sweden)

    Kim C.K.

    2015-06-01

    Full Text Available In this study, nickel nanoparticles were synthesized in ethanol using portable pulsed wire evaporation, which is a one-step physical method. From transmission electron microscopy images, it was found that the Ni nanoparticles exhibited a spherical shape with an average diameter of 7.3 nm. To prevent aggregation of the nickel nanoparticles, a polymer surfactant was added into the ethanol before the synthesis of nickel nanoparticles, and adsorbed on the freshly synthesized nickel nanoparticles during the wire explosion. The dispersion stability of the prepared nickel nanofluids was investigated by zeta-potential analyzer and Turbiscan optical analyzer. As a result, the optimum concentration of polymer surfactant to be added was suggested for the maximized dispersion stability of the nickel nanofluids.

  7. Study on the stability and reliability of Clinotron at Y-band

    Science.gov (United States)

    Li, Shuang; Wang, Jianguo; Chen, Zaigao; Wang, Guangqiang; Wang, Dongyang; Teng, Yan

    2017-11-01

    To improve the stability and reliability of Clinotron at the Y-band, some key issues are researched, such as the synchronous operating mode, the heat accumulation on the slow-wave structure, and the errors in micro-fabrication. By analyzing the dispersion relationship, the working mode is determined as the TM10 mode. The problem of heat dissipation on a comb is researched to make a trade-off on the choice of suitable working conditions, making sure that the safety and efficiency of the device are guaranteed simultaneously. The study on the effect of tolerance on device's performance is also conducted to determine the acceptable error during micro-fabrication. The validity of the device and the cost for fabrication are both taken into consideration. At last, the performance of Clinotron under the optimized conditions demonstrates that it can work steadily at 315.89 GHz and the output power is about 12 W, showing advanced stability and reliability.

  8. Thermal stability of grain boundaries in nanocrystalline Zn studied by positron lifetime spectroscopy

    International Nuclear Information System (INIS)

    Zhou Kai; Li Hui; Pang Jinbiao; Wang Zhu

    2012-01-01

    Nanocrystalline Zn prepared by compacting nanoparticles with mean grain size about 55 nm at 15 MPa has been studied by positron lifetime spectroscopy. For the bulk Zn sample, the vacancy defect is annealed out at about 350 °C, but for the nanocrystalline Zn sample, the vacancy cluster in grain boundaries is quite difficult to be annealed out even at very high temperature (410 °C). In the grain boundaries of nanocrystalline Zn, the small free volume defect (not larger than divacancy) is dominant according to the high relative intensity for the short positron lifetime (τ 1 ). The oxide (ZnO) inside the grain boundaries has been found having an effect to hinder the decrease of average positron lifetime (τ av ), which probably indicates that the oxide stabilizes the microstructure of the grain boundaries. This stabilization is very important for the nanocrystalline materials using as radiation resistant materials.

  9. The study of the antimicrobial activity of colloidal solutions of silver nanoparticles prepared using food stabilizers.

    Science.gov (United States)

    Balandin, G V; Suvorov, O A; Shaburova, L N; Podkopaev, D O; Frolova, Yu V; Ermolaeva, G A

    2015-06-01

    The bactericidal effect of colloidal solutions of silver nanoparticles based on food stabilizers, gum arabic and chitosan, against bacterial cultures of microorganisms in food production is described. The antibacterial activity of nanotechnology products containing different amounts of stabilizing additives when applied to solid pH-neutral substrates is studied. For its evaluation a method making it possible to take into account the capability of nanoparticles to diffuse in solid media was applied. Minimal inhibitory concentrations of nanoparticles used against Erwinia herbicola, Pseudomonas fluorescens, Bacillus subtilis, Sarcina flava were found. A suggestion was made concerning the influence of the spatial structure of bacteria on the antibacterial activity of colloidal solutions of silver nanoparticles. The data concerning the antibacterial activity and minimal inhibiting concentrations of nanoparticles may be used for development of products suppressing activity of microorganisms hazardous for food production.

  10. SERS studies on the interaction between UO22+ and PVP-stabilized silver nanoparticles

    International Nuclear Information System (INIS)

    Roy, M.; Tyagi, A.K.; Kumar, Rakesh; Pandey, A.K.; Goswami, A.

    2010-01-01

    Interaction between uranyl (UO 2 2+ ) ions and silver nanoparticles (Ag-nps) stabilized by suitable polymeric capping agents has been studied in aqueous phase using surface enhanced resonance Raman spectroscopy technique (SERS). Polyvinylpyrrolidone (PVP) stabilized Ag-nps were synthesized by dissolving in water appropriate amount of PVP and AgNO 3 along with a suitable reducing agent in the form of either formamide or sodium borohydride. The solution was vigorously stirred for 5h and finally nanoparticle sols were obtained. A series of analyte samples was prepared by adding an appropriate amount of silver sol to different volumes of uranyl stock solution prepared at pH=3. The solutions were then drop cast on glass slides and dried in air. Preliminary results on drop-cast samples are presented here

  11. Study of the relationships between nuclear decontamination foams stability and their physicochemical properties

    International Nuclear Information System (INIS)

    Dame, C.

    2006-03-01

    The LPAD (French Atomic Energy Commission) develops innovative processes in the frame of the future dismantling of nuclear facilities. Formulations were developed using high viscosified foams stabilized by biodegradable nonionic surfactants: alkyl poly-glucosides and viscosifiers (xanthan gum), which allow us to increase the foam lifetime and thus contact time of chemical reactants with the facility walls. We have considered the relationships between physicochemical properties and foam stability through the exploration of the foam at three different scales: from the molecular range (micelles, surface tension and visco-elasticity), to the film and Plateau border range (XR reflectivity, surface shear viscosity) and to macroscopic range, meaning the whole foam (foaminess, liquid fraction and wall film thickness evolution). Finally, exploratory study is presented concerning simultaneous foam three scales characterisation by small angle neutron scattering. (author)

  12. Comparative study of different techniques of composting and their stability evaluation in municipal solid waste

    International Nuclear Information System (INIS)

    Iqbal, M.K.; Khan, R.A.; Nadeem, A.; Hussnain, A.

    2012-01-01

    Spatial differences in the physical and chemical characteristics related to maturity of composted organic matter are strongly influenced by composting methods. For evaluation of compost maturity three locally fabricated composters (aerobic, mixed type, anaerobic) processes were examined at seven days interval up to 91 days by loading MSW along with bulking agent. Gradual changes in physico chemical characteristics (temperature, pH, moisture, CEC, humification) related to stability and maturity of compost were studied and compared. Increase in ammonia nitrogen level due to rise in temperature was maximum in aerobic process. Substantial increase in CEC in aerobic process was earlier which leads to establish the optimal degree of maturity as compared to other processes. FA and HI decrease rapidly as composting progressed. Optimal level in stability and maturity parameters like C:N, HA, DH and HR were attained earlier in aerobic process as compared to mixed type and anaerobic processes due to continuous aeration. The parameters (HR, DH, FA, HA), which indicate the compost stability were correlated among themselves. The parameters defining maturity such as CEC, ammonia nitrate and C:N ratio were also related to above mention parameters. The compost from the aerobic process provided good humus and micro nutrients. Result from this study will assist in method optimization and quality of the compost product. (author)

  13. Stability of DREEM in a Sample of Medical Students: A Prospective Study

    Directory of Open Access Journals (Sweden)

    Muhamad Saiful Bahri Yusoff

    2012-01-01

    Full Text Available Background. Over the last 15 year, DREEM was applied in various educational settings to appraise educational climate. So far, none of article reported its stability in Malaysian medical students. Objective. To determine stability of the DREEM to measure educational climate at different time and occasions using a sample of medical students. Methodology. A prospective cohort study was done on 196 first year medical students. It was administered to the medical students at four different intervals. The Cronbach's alpha and intraclass correlation analysis were applied to measure internal consistency and agreement level across the intervals. The analysis was done using SPSS 18. Result. A total of 186 (94.9% medical students responded completely to the DREEM inventory. The overall Cronbach's alpha value of the DREEM at the four measurements ranged between 0.91 and 0.94. The average Cronbach's alpha values of the five subscales ranged between 0.45 and 0.83. The ICC coefficient values for the DREEM total score was 0.67 and its subscales ranged between 0.51 and 0.62. Conclusion. This study supported satisfactory levels of stability and internal consistency of the DREEM to measure educational climate over multiple observations in a sample of Malaysian medical students. Continued research is required to optimise its psychometric credential across educational settings.

  14. A comparative study of stabilizing control of a planer electromagnetic levitation using PID and LQR controllers

    Directory of Open Access Journals (Sweden)

    Mundher H.A. Yaseen

    Full Text Available Magnetic levitation is a technique to suspend an object without any mechanical support. The main objective of this study is to demonstrate stabilized closed loop control of 1-DOF Maglev experimentally using real-time control simulink feature of (SIMLAB microcontroller. Proportional Integral Derivative (PID and Linear Quadratic Regulator (LQR controllers are employed to examine the stability performance of the Maglev control system under effect of unbalanced change of load and wave signal on Maglev plane. The effect of unbalanced change of applied load on single point, line and plane are presented. Furthermore, in order to study the effect of sudden change in input signal, the input of wave signal has been applied on all points of the prototype maglev plate simultaneously. The results of pulse width modulation (PWM reveal that the control system using LQR controller provides faster response to adjust the levitated plane comparing to PID controller. Moreover, the air gap distance that controlled using PID controller is rather stable with little oscillation. Meanwhile, LQR controller provided more stability and homogeneous response. Keywords: Magnetic levitation (Maglev, Linear Quadratic Regulator (LQR, PID controller, SIMLAB Platform

  15. Study of the stability of organic ligands usable for the spent nuclear fuel reprocessing

    International Nuclear Information System (INIS)

    Draye, Micheline

    1994-01-01

    The first part of this research thesis on the stability of organic ligands in radioactive environment, reports the study of the stability of the dicyclohexano-18-crown-6 (DCH18C6) in radioactive environment by using several analytical techniques (nuclear magnetic resonance or NMR, X-ray diffraction, Fourier transform infrared spectroscopy or FTIR, gas chromatography or GC, and coupled gas chromatography/mass spectroscopy). The seven main radiolysis products of DCH18C6 are identified and then synthesised to be tested in radioactive environment. These products are soluble in nitric medium, and partially precipitate plutonium, but cannot in any case disturb the reprocessing process based on a continuous extraction system. Chemical yields are computed and DCH18C6 appears to be a serious candidate for the reprocessing of spent nuclear fuels. The second part reports the study of the stability of the poly(4-vinylpyridine) or P4VP in radioactive environment. It appears that gamma radiations produce radicals in the P4VP which recombine in function of the irradiation dose. However, this material is very stable in acid environment and radioactive environment [fr

  16. A comparative study of stabilizing control of a planer electromagnetic levitation using PID and LQR controllers

    Science.gov (United States)

    Yaseen, Mundher H. A.

    Magnetic levitation is a technique to suspend an object without any mechanical support. The main objective of this study is to demonstrate stabilized closed loop control of 1-DOF Maglev experimentally using real-time control simulink feature of (SIMLAB) microcontroller. Proportional Integral Derivative (PID) and Linear Quadratic Regulator (LQR) controllers are employed to examine the stability performance of the Maglev control system under effect of unbalanced change of load and wave signal on Maglev plane. The effect of unbalanced change of applied load on single point, line and plane are presented. Furthermore, in order to study the effect of sudden change in input signal, the input of wave signal has been applied on all points of the prototype maglev plate simultaneously. The results of pulse width modulation (PWM) reveal that the control system using LQR controller provides faster response to adjust the levitated plane comparing to PID controller. Moreover, the air gap distance that controlled using PID controller is rather stable with little oscillation. Meanwhile, LQR controller provided more stability and homogeneous response.

  17. Formulation design of oral pediatric Acetazolamide suspension: dose uniformity and physico-chemical stability study.

    Science.gov (United States)

    Santoveña, Ana; Suárez-González, Javier; Martín-Rodríguez, Cristina; Fariña, José B

    2017-03-01

    The formulation of an active pharmaceutical ingredient (API) as oral solution or suspension in pediatrics is a habitual practice, due to the non-existence of many commercialized medicines in pediatric doses. It is also the simplest way to prepare and administer them to this vulnerable population. The design of a formulation that assures the dose and the system stability depends on the physico-chemical properties of the API. In this study, we formulate a class IV API, Acetazolamide (AZM) as suspension for oral administration to pediatric population. The suspension must comply attributes of quality, safety and efficacy for this route of administration. We use simple compounding procedures, as well as fewer pure excipients, as recommended for children. Mass and uniformity content assays and physical and chemical stability studies were performed. To quantify the API an UPLC method was used. We verified the physico-chemical stability of the suspensions and that they passed the mass test of the European Pharmacopeia (EP), but not the dose uniformity test. This reveals that AZM must be formulated as liquid forms with a more complex system of excipients (not usually indicated in pediatrics), or otherwise solid forms capable of assuring uniformity of mass and dose for every dosage unit.

  18. Study of the thermo-electronic stability of LTS conductors and contribution to the study of the thermo-electric stability of HTS conductors. Novel techniques to simulate quench precursors in superconducting electro-magnets

    International Nuclear Information System (INIS)

    Trillaud, F.

    2005-09-01

    Most of this work deals with the development of new heater technology to simulate quench precursors in super-conducting electro-magnets. The carbon paste point heater and 2 alternative technologies have been used: induction coils and the diode laser. 2 main experimental setups with 2 different heaters have been used to study the stability of Cu/NbTi composite wires. The order of magnitude of the results obtained with the charged point heater and the diode laser is consistent. Our work covered both low critical temperature (LTS) conductors and high critical temperature (HTS) conductors. A large body of data has been gathered on quench energies and normal zone propagation velocities (NZPV). Concerning quench energy: LTS conductors appear largely more sensitive to heat disturbances than HTS conductors. NZPV enables one to define the criteria for which a magnet can be considered as self-protected. It is commonly assumed that, below 1 m/s, active protection is necessary to ensure safe quenches. This is the case for HTS conductors whose NZPV is of the order of a few centimeters per seconds, at most. However, the NZPVs of LTS conductors are above a few meters per seconds. While HTS conductors can suffer from local hot spots which diffuse slowly resulting in damaging overheating, LTS conductors spread the normal zone quickly enough owing to their good thermal conductivity to minimize local overheating. In addition, this gives enough time to dump the energy of the magnet. This work clears a new path to carry out accurate and reproducible experiment on superconductors. It demonstrates the powerfulness of diode laser technology for stability studies. Numerical simulations of the thermal behaviour of a Cu/NbTi multi-filament composite wire have been performed, they are based on a simplified transient liquid helium heat exchange model. This model appears to be not accurate enough to simulate the early time evolution of the voltage between the current sharing temperature and the

  19. Evaluation of microwave oven heating for prediction of drug-excipient compatibilities and accelerated stability studies.

    Science.gov (United States)

    Schou-Pedersen, Anne Marie V; Østergaard, Jesper; Cornett, Claus; Hansen, Steen Honoré

    2015-05-15

    Microwave ovens have been used extensively in organic synthesis in order to accelerate reaction rates. Here, a set up comprising a microwave oven combined with silicon carbide (SiC) plates for the controlled microwave heating of model formulations has been applied in order to investigate, if a microwave oven is applicable for accelerated drug stability testing. Chemical interactions were investigated in three selected model formulations of drug and excipients regarding the formation of ester and amide reaction products. In the accelerated stability studies, a design of experiments (DoE) approach was applied in order to be able to rank excipients regarding reactivity: Study A: cetirizine with PEG 400, sorbitol, glycerol and propylene glycol. Study B: 6-aminocaproic acid with citrate, acetate, tartrate and gluconate. Study C: atenolol with citric, tartaric, malic, glutaric, and sorbic acid. The model formulations were representative for oral solutions (co-solvents), parenteral solutions (buffer species) and solid dosage forms (organic acids applicable for solubility enhancement). The DoE studies showed overall that the same impurities were generated by microwave oven heating leading to temperatures between 150°C and 180°C as compared to accelerated stability studies performed at 40°C and 80°C using a conventional oven. Ranking of the reactivity of the excipients could be made in the DoE studies performed at 150-180°C, which was representative for the ranking obtained after storage at 40°C and 80°C. It was possible to reduce the time needed for drug-excipient compatibility testing of the three model formulations from weeks to less than an hour in the three case studies. The microwave oven is therefore considered to be an interesting alternative to conventional thermal techniques for the investigation of drug-excipient interactions during preformulation. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Progress in the Study of RF Heating and Stabilization on HANBIT Mirror Device

    International Nuclear Information System (INIS)

    Kwon, M.; Bak, J.G.; Choh, K.; Choi, J.H.; Choi, J.W.; England, A.C.; Hong, J.S.; Jhang, H.G.; Kim, J.Y.; Kim, S.S.; Ko, W.H.; Lee, D.K.; Lee, J.H.; Lee, S.G.; Lee, H.G.; Lho, T.; Na, H.K.; Park, B.H.; Park, M.K.; Seo, D.C.; Seo, S.H.; Yeom, J.H.; Yoo, S.J.; You, K.I.; Yoon, J.S.; Yoon, S.W.

    2005-01-01

    The HANBIT device is a simple mirror-type device of which the length, radius, and magnetic field are about 5 m, 0.18 m, and 0.1-0.3 T, respectively, in the central cell. In HANBIT, two antenna systems are used for the plasma production, heating, and MHD stabilization; one is the slot antenna located near the center region with the maximum power of 500 kW and the typical frequency of 3.5 MHz, and the other DHT antenna located near the mirror throat with the maximum power of 100 kW and the frequency of 3.75 MHz. Recent experimental studies in HANBIT indicate that the slot antenna system can produce stable, high-density plasmas in apparently two different regimes; one is the fast wave regime with the ratio w/Wci∼2 and the other is the slow wave regime with w< Wci, where w and Wci are the RF and ion cyclotron resonance frequencies, respectively. The possible stabilization mechanism appears to be the ponderomotive force by the fast wave in the regime of w/Wci∼2, while the RF side-band coupling force by the slow wave in the regime of w< Wci. A clear excitation of the flute-type, interchange modes with the axial mode number n=0 is observed when the RF power is not enough for the stabilization, particularly, in the slow wave regime. Here, we report the results of these experimental and theoretical studies on the RF heating and stabilization processes by the slot antenna in HANBIT. In addition, we introduce briefly the results of the other on-going research works in HANBIT, which include the beach-wave ion heating experiment using DHT antenna, the pre-ionization experiment using the thermal electron cathode or ECH, and the analysis of plasma-wall interaction and neutral transport

  1. Oxidative stabilization of polyacrylonitrile nanofibers and carbon nanofibers containing graphene oxide (GO: a spectroscopic and electrochemical study

    Directory of Open Access Journals (Sweden)

    İlknur Gergin

    2017-08-01

    Full Text Available In this study, a precursor for carbon nanofibers (CNF was fabricated via electrospinning and carbonized through a thermal process. Before carbonization, oxidative stabilization should be applied, and the oxidation mechanism also plays an important role during carbonization. Thus, the understanding of the oxidation mechanism is an essential part of the production of CNF. The oxidation process of polyacrylonitrile was studied and nanofiber webs containing graphene oxide (GO are obtained to improve the electrochemical properties of CNF. Structural and morphological characterizations of the webs are carried out by using attenuated total reflectance Fourier transform infrared spectroscopy and Raman spectroscopy, scanning electron microscopy, atomic force microscopy and transmission electron microscopy. Mechanical tests are performed with a dynamic mechanical analyzer, and thermal studies are conducted by using thermogravimetric analysis. Electrochemical impedance spectroscopy, and cyclic voltammetry are used to investigate capacitive behavior of the products. The proposed equivalent circuit model was consistent with charge-transfer processes taking place at interior pores filled with electrolyte.

  2. Micromagnetic study of skyrmion stability in confined magnetic structures with perpendicular anisotropy

    Science.gov (United States)

    Novak, R. L.; Garcia, F.; Novais, E. R. P.; Sinnecker, J. P.; Guimarães, A. P.

    2018-04-01

    Skyrmions are emerging topological spin structures that are potentially revolutionary for future data storage and spintronics applications. The existence and stability of skyrmions in magnetic materials is usually associated to the presence of the Dzyaloshinskii-Moriya interaction (DMI) in bulk magnets or in magnetic thin films lacking inversion symmetry. While some methods have already been proposed to generate isolated skyrmions in thin films with DMI, a thorough study of the conditions under which the skyrmions will remain stable in order to be manipulated in an integrated spintronic device are still an open problem. The stability of such structures is believed to be a result of ideal combinations of perpendicular magnetic anisotropy (PMA), DMI and the interplay between geometry and magnetostatics. In the present work we show some micromagnetic results supporting previous experimental observations of magnetic skyrmions in spin-valve stacks with a wide range of DMI values. Using micromagnetic simulations of cobalt-based disks, we obtain the magnetic ground state configuration for several values of PMA, DMI and geometric parameters. Skyrmion numbers, corresponding to the topological charge, are calculated in all cases and confirm the occurrence of isolated, stable, axially symmetric skyrmions for several combinations of DMI and anisotropy constant. The stability of the skyrmions in disks is then investigated under magnetic field and spin-polarized current, in finite temperature, highlighting the limits of applicability of these spin textures in spintronic devices.

  3. A THEORETICAL AND NUMERICAL STUDY OF THERMOSOLUTAL CONVECTION: STABILITY OF A SALINITY GRADIENT SOLAR POND

    Directory of Open Access Journals (Sweden)

    Djamel Kalache

    2011-01-01

    Full Text Available A theoretical and numerical study of the effect of thermodiffusion on the stability of a gradient layer is presented. It intends to clarify the mechanisms of fluid dynamics and the processes which occur in a salinity gradient solar pond. A mathematical modelling is developed to describe the thermodiffusion contribution on the solar pond where thermal, radiative, and massive fluxes are coupled in the double diffusion. More realistic boundary conditions for temperature and concentration profiles are used. Our results are compared with those obtained experimentally by authors without extracting the heat flux from the storage zone. We have considered the stability analysis of the equilibrium solution. We assumed that the perturbation of quantities such as velocity, temperature, and concentration are infinitesimal. Linearized equations satisfying appropriate prescribed boundary conditions are then obtained and expanded into polynomials form. The Galerkin method along with a symbolic algebra code (Maple are used to solve these equations. The effect of the separation coefficient y is analyzed in the positive and negative case. We have also numerically compared the critical Rayleigh numbers for the onset of convection with those obtained by the linear stability analysis for Le = 100, µa = 0.8, and f = 0.5.

  4. The Study on Stability and Seakeeping Characteristics of the Glass Bottom Boat Trimaran in Karimunjawa Island

    Science.gov (United States)

    Arswendo Adietya, Berlian; Windyandari, Aulia; Fauzan Zakki, Ahmad

    2018-03-01

    Recently the diversity of fish populations in the waters Karimunjawa Island is only appreciated by those who have the ability to play diving and snorkeling. It is due to the unavailability of a vehicle that is specially made to delight in the fascination of the underwater panorama. One of the alternative solutions is using the glass bottom boat technology which is using transparent bottom that might look out the underwater scenery instead of swimming and snorkeling. The paper has focused on the study of intact stability and seakeeping characteristics of glass bottom boat trimaran in Karimunjawa Island. The intact stability characteristics will be investigated at the various load cases and weight distribution configurations which are influenced by the passenger positions and fuel tank condition. Regarding the seakeeping performance analysis, the ITTC-Bretschneider will be adopted as the wave spectrum at the wave parameters defined from the operational environment. The influence of the parameters on the stability and seakeeping of the glass bottom boat trimaran are presented and discussed.

  5. Six weeks of core stability training improves landing kinetics among female capoeira athletes: a pilot study.

    Science.gov (United States)

    Araujo, Simone; Cohen, Daniel; Hayes, Lawrence

    2015-03-29

    Core stability training (CST) has increased in popularity among athletes and the general fitness population despite limited evidence CST programmes alone lead to improved athletic performance. In female athletes, neuromuscular training combining balance training and trunk and hip/pelvis dominant CST is suggested to reduce injury risk, and specifically peak vertical ground reaction forces (vGRF) in a drop jump landing task. However, the isolated effect of trunk dominant core stability training on vGRF during landing in female athletes had not been evaluated. Therefore, the objective of this study was to evaluate landing kinetics during a drop jump test following a CST intervention in female capoeira athletes. After giving their informed written consent, sixteen female capoeira athletes (mean ± SD age, stature, and body mass of 27.3 ± 3.7 years, 165.0 ± 4.0 cm, and 59.7 ± 6.3 kg, respectively) volunteered to participate in the training program which consisted of static and dynamic CST sessions, three times per week for six weeks. The repeated measures T-test revealed participants significantly reduced relative vGRF from pre- to post-intervention for the first (3.40 ± 0.78 vs. 2.85 ± 0.52 N·NBW-1, respectively [pcore stability training improves landing kinetics without improving jump height, and may reduce lower extremity injury risk in female athletes.

  6. Study on thermal stability and chemical structure of polyamide blended with small amount of Cu

    International Nuclear Information System (INIS)

    Arai, Tsuyoshi; Ueno, Tomonaga; Kajiya, Takafumi; Ishikawa, Tomoyuki; Takeda, Kunihiko

    2007-01-01

    The thermal stability and the chemical structure of Polyamide 66 (PA66) blended with a small amount of copper have been studied. The thermal degradation of the blend with 35 ppm or more of copper was restrained and no strong influence of the concentration of copper was observed. The molecular weight of PA66 decreased by the thermal aging process but the amount of decrease of the blend was smaller than that of the non-blend. The water uptake of the blend increased. The chemical structure, which was observed by IR and NMR, changed slightly by blending with copper after aging at higher temperatures. Multiple items influenced the thermal stability of PA66 blended with a small amount of copper instead of just one. Namely, the main chain of PA66 is cut by heat and the degree of the cut is restrained by the copper. The diffusion time of copper atoms that disperse uniformly in the PA66 matrix is short enough to cover the individual amide groups and the effect enlarges the entire configuration of the PA66 chain to enhance the thermal stability. (author)

  7. A new methodology based on functional principal component analysis to study postural stability post-stroke.

    Science.gov (United States)

    Sánchez-Sánchez, M Luz; Belda-Lois, Juan-Manuel; Mena-Del Horno, Silvia; Viosca-Herrero, Enrique; Igual-Camacho, Celedonia; Gisbert-Morant, Beatriz

    2018-05-05

    A major goal in stroke rehabilitation is the establishment of more effective physical therapy techniques to recover postural stability. Functional Principal Component Analysis provides greater insight into recovery trends. However, when missing values exist, obtaining functional data presents some difficulties. The purpose of this study was to reveal an alternative technique for obtaining the Functional Principal Components without requiring the conversion to functional data beforehand and to investigate this methodology to determine the effect of specific physical therapy techniques in balance recovery trends in elderly subjects with hemiplegia post-stroke. A randomized controlled pilot trial was developed. Thirty inpatients post-stroke were included. Control and target groups were treated with the same conventional physical therapy protocol based on functional criteria, but specific techniques were added to the target group depending on the subjects' functional level. Postural stability during standing was quantified by posturography. The assessments were performed once a month from the moment the participants were able to stand up to six months post-stroke. The target group showed a significant improvement in postural control recovery trend six months after stroke that was not present in the control group. Some of the assessed parameters revealed significant differences between treatment groups (P Functional Principal Component Analysis to be performed when data is scarce. Moreover, it allowed the dynamics of recovery of two different treatment groups to be determined, showing that the techniques added in the target group increased postural stability compared to the base protocol. Copyright © 2018 Elsevier Ltd. All rights reserved.

  8. Stability studies of silymarin nanoemulsion containing Tween 80 as a surfactant

    Directory of Open Access Journals (Sweden)

    Rabea Parveen

    2015-01-01

    Full Text Available Background: Silymarin, a flavonolignan from "milk thistle" (Silybum marianum plant is used almost exclusively for hepatoprotection. Because of its low bioavailability, it was incorporated into a nanoemulsion formulation. The aim of the present study was to check the stability of silymarin nanoemulsion at different temperatures for 3 months. Materials and Methods: The oil-in-water based nanoemulsion formulation was prepared by titration method. Silymarin nanoemulsion was characterized by droplet size, viscosity, and refractive index. Droplet size, viscosity, and refractive index were determined every month. The shelf-life of silymarin nanoemulsion was determined by accelerated stability testing. Results: It was found that there was no significant change in the droplet size, viscosity, and refractive index at refrigerator and room temperature during the period of 3 months. The half-life of the optimized nanoemulsion formulation was found to be 4.74 years at room temperature. Conclusion: These results indicated that stability of silymarin can be enhanced in nanoemulsion formulation using Tween 80 as a surfactant.

  9. Development of bifurcated solutions and study of their stability in damage problems

    International Nuclear Information System (INIS)

    Beaurain, J.

    2011-01-01

    This work is concerned with the development and the implementation of a numerical optimization algorithm in an industrial software for studying the stability of non local gradient damage numerical solutions given by finite elements method. Stability is a fundamental concept, that takes into account the existence of multiple solutions which could emerge due to the softening constitutive laws generally used to represent the irreversible damage of materials like concrete. Among all those solutions, only stable ones, invariant by little perturbations, could be physically observed. The difficulty is to satisfy the irreversible constraint of damage which drives to define a stability criterion by the positivity of the second derivative of the total energy in the direction of increasing damage. It numerically leads to ensure the positivity of the minimum of a quadratic form, using the second derivative matrix and subjected to inequalities constraints. In conclusion, the aim of this work is to implement an efficient and robust numerical constraints minimization algorithm in Code-Aster, adapted to different damage modelling, and to improve it using test cases found in the literature. (author)

  10. Computer Simulation Study of the Stability Mechanism of Thermophile, MJ0305

    Science.gov (United States)

    Song, Hyundeok; Beck, Thomas

    2011-04-01

    Methanococcus jannaschii (MJ) is a methane-producing thermophile, which was discovered in a 2600m-deep Pacific Ocean vent in 1983. It has the ability to thrive at high temperatures and high pressures, which are unfavorable for most life forms. There have been some experiments to study its stability under extreme conditions, but still the origin of the stability of MJ is not exactly known. MJ0305 is MJ's chloride channel protein. The structure of MJ0305 was built by homology modeling. We compared the stability of MJ0305 with mesophilic Ecoli at 300K, 330K, and 360K by computer simulation to test the effects of temperature. Our results show that high temperatures significantly affect the number of salt bridges and hydrogen bonds. High temperatures decreased the average number of hydrogen bonds for Ecoli and MJ0305. Increased salt bridges at 330K make MJ0305 more stable. Network analysis of MJ0305 showed an increase in the number of hubs at high temperatures. In contrast, the number of hubs of Ecoli was decreased at high temperatures. Calculated network entropy is proportional to the number of hubs. Increased network entropy of MJ0305 at 330K implies increased robustness.

  11. Muscle Coactivation during Stability Exercises in Rhythmic Gymnastics: A Two-Case Study

    Directory of Open Access Journals (Sweden)

    Alicja Rutkowska-Kucharska

    2018-01-01

    Full Text Available Balance exercises in rhythmic gymnastics are performed on tiptoes, which causes overload of foot joints. This study aimed to evaluate the engagement of muscles stabilizing ankle and knee joints in balance exercises and determine exercises which may lead to ankle and knee joint injuries. It was hypothesized that long-term training has an influence on balance control and efficient use of muscles in their stabilizing function. Two rhythmic gymnasts (8 and 21 years old performed balances on tiptoes (side split with hand support, ring with hand support and on a flat foot (back split without hand support exercise. Surface electromyography, ground reaction forces, and kinematic parameters of movement were measured. The measuring systems applied were synchronized with the BTS SMART system. The results show the necessity to limit balance exercises on tiptoes in children because gastrocnemius medialis (GM and gastrocnemius lateralis (GL activity significantly exceeds their activity. Ankle joint stabilizing activity of GM and GL muscles in the younger gymnast was more important than in the older one. Performing this exercise, the younger gymnast distributed load on the anterior side of the foot while the older one did so on its posterior. Gymnastics coaches should be advised to exclude ring with hand support exercise from the training of young gymnasts.

  12. A study on the fusion reactor - Development of MHD stability and transport code for KT-2 tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Koo; Shin, Kyo Jin [Pohang University of Science and Tecnology, Pohang (Korea, Republic of)

    1996-08-01

    MHD Stability analyses for KT-2 Tokamak were carried out by using CART (Resistive 3-D) Code. Linear Growth rates and linear perturbed eigen function of both N=0 axisymmetric mode and N=1 kink modes of highly elongated tokamak plasmas, in the presence of a conducting wall at various distances are computed and linear and nonlinear evolution of N=0 axisymmetric modes are simulated. 26 refs., 25 figs. (author)

  13. Genetic Moderation of Stability in Attachment Security from Early Childhood to Age 18 Years: A Replication Study

    Science.gov (United States)

    Raby, K. Lee; Roisman, Glenn I.; Booth-LaForce, Cathryn

    2015-01-01

    A longstanding question for attachment theory and research is whether genetically based characteristics of the child influence the development of attachment security and its stability over time. This study attempted to replicate and extend recent findings indicating that the developmental stability of attachment security is moderated by oxytocin…

  14. Nanohydroxyapatite Silicate-Based Cement Improves the Primary Stability of Dental Implants: An In Vitro Study

    Directory of Open Access Journals (Sweden)

    Hooman Khorshidi

    2017-01-01

    Full Text Available Objectives. Insufficient cortical bone volume when placing implants can lead to lack of primary stability. The use of cement as a bone fill material in bone defects around dental implant could result in better clinical outcome. HA has shown excellent biological properties in implant dentistry. The purpose of this study was to evaluate the effect of nanohydroxyapatite powder (Nano-HA in combination with accelerated Portland cement (APC on implant primary stability in surgically created circumferential bone defects in a bovine rib in vitro model. Materials and Methods. Sixteen bovine rib bones and thirty-six implants of same type and size (4 mm × 10 mm were used. Implants were divided into six groups: no circumferential bone defect, defect and no grafting, bone chips grafting, Nano-HA grafting, APC grafting, and Nano-HA mixed to APC grafting (Nano-HA-APC. Circumferential defects around the implants were prepared. The implant stability quotient (ISQ values were measured before and after the grafting. Results. APC exhibited the highest ISQ values. A significant increase of ISQ values following the grafting of Nano-HA-APC (18.08±5.82 and APC alone (9.50±4.12 was achieved. Increase of ISQ values after 72 hours was 24.16±5.01 and 17.58±4.89, respectively. Nano-HA grafting alone exhibited the least rise in ISQ values. Conclusions. Nanohydroxyapatite silicate-based cement could improve the primary stability of dental implants in circumferential bone defect around implants.

  15. Stability studies of lincomycin hydrochloride in aqueous solution and intravenous infusion fluids.

    Science.gov (United States)

    Czarniak, Petra; Boddy, Michael; Sunderland, Bruce; Hughes, Jeff D

    2016-01-01

    The purpose of this study was to evaluate the chemical stability of Lincocin(®) (lincomycin hydrochloride) in commonly used intravenous fluids at room temperature (25°C), at accelerated-degradation temperatures and in selected buffer solutions. The stability of Lincocin(®) injection (containing lincomycin 600 mg/2 mL as the hydrochloride) stored at 25°C±0.1°C in sodium lactate (Hartmann's), 0.9% sodium chloride, 5% glucose, and 10% glucose solutions was investigated over 31 days. Forced degradation of Lincocin(®) in hydrochloric acid, sodium hydroxide, and hydrogen peroxide was performed at 60°C. The effect of pH on the degradation rate of lincomycin hydrochloride stored at 80°C was determined. Lincomycin hydrochloride w as found to maintain its shelf life at 25°C in sodium lactate (Hartmann's) solution, 0.9% sodium chloride solution, 5% glucose solution, and 10% glucose solution, with less than 5% lincomycin degradation occurring in all intravenous solutions over a 31-day period. Lincomycin hydrochloride showed less rapid degradation at 60°C in acid than in basic solution, but degraded rapidly in hydrogen peroxide. At all pH values tested, lincomycin followed first-order kinetics. It had the greatest stability near pH 4 when stored at 80°C (calculated shelf life of 4.59 days), and was least stable at pH 2 (calculated shelf life of 0.38 days). Lincocin(®) injection was chemically found to have a shelf life of at least 31 days at 25°C when added to sodium lactate (Hartmann's) solution, 0.9% sodium chloride solution, 5% glucose solution, and 10% glucose solution. Solutions prepared at approximately pH 4 are likely to have optimum stability.

  16. Elaboration, characterization, and stability study of a sunscreen emulsion for use as a towelette application in pediatric photoprotection.

    Science.gov (United States)

    Clares, B; Gálvez, P; Gallardo, V; Ruiz, M A

    2011-01-01

    The World Health Organization (WHO) estimates that as much as 80% of the solar radiation that an adult receives throughout his/her life is received during the first 18 years (1). Skin protection against harmful solar radiation during this early stage of life is therefore a highly important factor in the prevention of future skin-related diseases. In this respect, recent developments in pediatric dermatology and cosmetic technology have led to remarkable improvements in child skin protection products. However, in spite of these scientific breakthroughs, many currently available commercial sunscreen formulations have not been well received by the general public, due to inadequate sensory properties, chemical instability, undesirable side effects, and low effectiveness. These disadvantages are not only attributable to the formulations themselves, active principle, and excipients, but also, to a large extent, galenic aspects. The objective of this work was to develop and characterize a sunscreen emulsion for pediatric use, using a towelette as vehicle, to overcome problems of ineffectiveness and formulation instability, and to improve skin-sensory properties. The composition of the towelette, the emulsion, and the presentation format were selected on the basis of the differences between children's and adult skin. In order to evaluate the chemical stability of the formulation, a study of the organoleptic, physicochemical, microbiological, and rheological characteristics was carried out at 4°, 25°, and 40°C over a period of 30 days. Tests were performed on both the sunscreen emulsion only and the same formulation impregnated within a towel, to test the influence the towel may have on the stability of the emulsion.

  17. Slope Stability Analysis of Mountainous/Hilly regions of Nepal: A case study of Bhotekoshi Hydropower site

    Science.gov (United States)

    Acharya, A.; Gautam, S.; Kafle, K. R.

    2017-12-01

    Nepal is a mountainous, developing country that straddles the boundary between the Indian and Himalayan tectonic plates. In Nepal, landslides represent a major constraint on development, causing high levels of economic loss and substantial number of fatalities each year. There is a general consensus that the impacts of landslides in mountainous countries such as Nepal are increasing with time due to unstable slopes. The present study deals with the field investigation of slope stability in mountainous/hilly region of Nepal. Among the natural hazards that occur in regularly in Nepal, flood and landslides due to unstable slopes are by far the serious ones. They claim many human lives every year and cause other damages such as destruction and blockage of highway, destruction of hydropower, losses of livestock, crops and agricultural land. Slope Mass Rating system and stereographic projection has been carried out for analysis of slope stability using standard formats and parameters. It has been found that there are few major discontinuities that play the role for the rock/soil slides around the area. The major discontinuities are 235°/67°. These joint sets play the main role to the plane as well as wedge failures around the area. The rock mass rating of the slope has been found to be 27 and the slope mass rating has been found to be 37.8. The obtained slope mass rating value lies on IV class (Bad) that represents unstable slope having planner or big wedge failure and needs to be corrective measures in the slope. From stereographic projection, wedge failure of the slope has been seen according to the conditions of slope failure.

  18. Study of thermal stability and degradation of fire resistant candidate polymers for aircraft interiors

    Science.gov (United States)

    Hsu, M. T. S.

    1976-01-01

    The thermochemistry of bismaleimide resins and phenolphthalein polycarbonate was studied. Both materials are fire-resistant polymers and may be suitable for aircraft interiors. The chemical composition of the polymers has been determined by nuclear magnetic resonance and infrared spectroscopy and by elemental analysis. Thermal properties of these polymers have been characterized by thermogravimetric analyses. Qualitative evaluation of the volatile products formed in pyrolysis under oxidative and non-oxidative conditions has been made using infrared spectrometry. The residues after pyrolysis were analyzed by elemental analysis. The thermal stability of composite panel and thermoplastic materials for aircraft interiors was studied by thermogravimetric analyses.

  19. Study of the stability of the gallium isotopes beyond the N = 50 neutron shell closure

    CERN Multimedia

    We propose to study the stability of the nuclear structure beyond N = 50 and Z = 28 with beams of neutron-rich gallium isotopes at the CRIS experiment at ISOLDE. The study of their hyperne structure and isotope shift will provide spins, magnetic dipole moments, electric quadrupole moments and changes in the mean-square charge radii. The $\\beta$-decay of $^{80}$Ga will be unambiguously measured using the technique of Laser Assisted Nuclear Decay Spectroscopy (LANDS). The half-lives of the very neutron-rich isotopes with N > 54 will be measured for their impact on the astrophysical ${r}$-process.

  20. Study of the influence of imperfections on the dynamic stability of tanks

    International Nuclear Information System (INIS)

    Uras, R.A.; Liu, Wing Kam; Chen, Yi-Jung

    1990-01-01

    The influence of geometrical imperfections on the dynamic stability of liquid-filled shells under horizontal ground excitation is studied. Some basic concepts in the large deformation and large deformation thin shell theory are recalled. The work done by inertial and internal forces are given in the Gaussian surface coordinate system. A general imperfection pattern in the circumferential direction is introduced. The emphasis is particularly dedicated to the analysis of the geometrical stiffness term. Different patterns are studied to explain the occurrence of additional instability regions. 6 refs., 1 fig., 3 tabs

  1. Ecological and Bioengineering Studies for Stabilizing the Wad Medani-Sennar Roadside Slope Linking the Gezira and Sennar States

    Directory of Open Access Journals (Sweden)

    Altaeb Mohammed

    2018-01-01

    Full Text Available The erosion of the highway embankment slope's soil along the Wad Medani-Sennar road is a significant issue, as there are many traffic accidents on this road, with an average of 15 to 25 fatalities per annum. It was thus decided to investigate this issue to find a method to protect slope from erosion on this road and to provide new approaches to slope erosion knowledge gap in Sudan. An engineering survey was carried out, followed by geotechnical studies, experimental work and interviews with academic experts regarding native vegetation in the survey area. These include measuring the eroded parts of the road; studying cross- sections of the road; soil experiments to check the strength, compaction and particle size distribution; and a native vegetation survey to check for suitable plants that could be used to control the slope erosion. It was found that an appropriate bio-engineering method to stabilize the slope soil against erosion due to rainfall was to cultivate the grasses Cynodon Dactylon and Vetiver on the slopes. In conclusion, that using native vegetation for eco -protection, was an excellent solution to the problem based on the climate, native vegetation, and type of soil in Sudan and it reduces the accidents.

  2. Research on Water Resources Design Carrying Capacity

    Directory of Open Access Journals (Sweden)

    Guanghua Qin

    2016-04-01

    Full Text Available Water resources carrying capacity (WRCC is a recently proposed management concept, which aims to support sustainable socio-economic development in a region or basin. However, the calculation of future WRCC is not well considered in most studies, because water resources and the socio-economic development mode for one area or city in the future are quite uncertain. This paper focused on the limits of traditional methods of WRCC and proposed a new concept, water resources design carrying capacity (WRDCC, which incorporated the concept of design. In WRDCC, the population size that the local water resources can support is calculated based on the balance of water supply and water consumption, under the design water supply and design socio-economic development mode. The WRDCC of Chengdu city in China is calculated. Results show that the WRDCC (population size of Chengdu city in development modeI (II, III will be 997 ×104 (770 × 104, 504 × 104 in 2020, and 934 × 104 (759 × 104, 462 × 104 in 2030. Comparing the actual population to the carrying population (WRDCC in 2020 and 2030, a bigger gap will appear, which means there will be more and more pressure on the society-economic sustainable development.

  3. Linking slope stability and climate change: the Nordfjord region, western Norway, case study

    Science.gov (United States)

    Vasskog, K.; Waldmann, N.; Ariztegui, D.; Simpson, G.; Støren, E.; Chapron, E.; Nesje, A.

    2009-12-01

    Valleys, lakes and fjords are spectacular features of the Norwegian landscape and their sedimentary record recall past climatic, environmental and glacio-isostatic changes since the late glacial. A high resolution multi-proxy study is being performed on three lakes in western Norway combining different geophysical methods and sediment coring with the aim of reconstructing paleoclimate and to investigate how the frequency of hazardous events in this area has changed through time. A very high resolution reflection seismic profiling revealed a series of mass-wasting deposits. These events, which have also been studied in radiocarbon-dated cores, suggest a changing impact of slope instability on lake sedimentation since the late glacial. A specially tailored physically-based mathematical model allowed a numerical simulation of one of these mass wasting events and related tsunami, which occurred during a devastating rock avalanche in 1936 killing 74 persons. The outcome has been further validated against historical, marine and terrestrial information, providing a model that can be applied to comparable basins at various temporal and geographical scales. Detailed sedimentological and geochemical studies of selected cores allows characterizing the sedimentary record and to disentangle each mass wasting event. This combination of seismic, sedimentary and geophysical data permits to extend the record of mass wasting events beyond historical times. The geophysical and coring data retrieved from these lakes is a unique trace of paleo-slope stability generated by isostatic rebound and climate change, thus providing a continuous archive of slope stability beyond the historical record. The results of this study provide valuable information about the impact of climate change on slope stability and source-to-sink processes.

  4. The study on length and diameter ratio of nail as preliminary design for slope stabilization

    Science.gov (United States)

    Gunawan, Indra; Silmi Surjandari, Niken; Muslih Purwana, Yusep

    2017-11-01

    Soil nailing technology has been widely applied in practice for reinforced slope. The number of studies for the effective design of nail-reinforced slopes has also increased. However, most of the previous study was focused on a safety factor of the slope; the ratio of length and diameter itself has likely never been studied before. The aim of this study is to relate the length and diameter ratio of the nail with the safety factor of the 20 m height of sand slope in the various angle of friction and steepness of the slope. Simplified Bishop method was utilized to analyze the safety factor of the slope. This study is using data simulation to calculate the safety factor of the slope with soil nailing reinforcement. The results indicate that safety factor of slope stability increases with the increase of length and diameter ratio of the nail. At any angle of friction and steepness of the slope, certain effective length and diameter ratio was obtain. These results may be considered as a preliminary design for slope stabilization.

  5. Stability studies of lincomycin hydrochloride in aqueous solution and intravenous infusion fluids

    Directory of Open Access Journals (Sweden)

    Czarniak P

    2016-03-01

    Full Text Available Petra Czarniak, Michael Boddy, Bruce Sunderland, Jeff D Hughes School of Pharmacy, Curtin University, Perth, WA, Australia Purpose: The purpose of this study was to evaluate the chemical stability of Lincocin® (lincomycin hydrochloride in commonly used intravenous fluids at room temperature (25°C, at accelerated-degradation temperatures and in selected buffer solutions.Materials and methods: The stability of Lincocin® injection (containing lincomycin 600 mg/2 mL as the hydrochloride stored at 25°C±0.1°C in sodium lactate (Hartmann’s, 0.9% sodium chloride, 5% glucose, and 10% glucose solutions was investigated over 31 days. Forced degradation of Lincocin® in hydrochloric acid, sodium hydroxide, and hydrogen peroxide was performed at 60°C. The effect of pH on the degradation rate of lincomycin hydrochloride stored at 80°C was determined.Results: Lincomycin hydrochloride was found to maintain its shelf life at 25°C in sodium lactate (Hartmann’s solution, 0.9% sodium chloride solution, 5% glucose solution, and 10% glucose solution, with less than 5% lincomycin degradation occurring in all intravenous solutions over a 31-day period. Lincomycin hydrochloride showed less rapid degradation at 60°C in acid than in basic solution, but degraded rapidly in hydrogen peroxide. At all pH values tested, lincomycin followed first-order kinetics. It had the greatest stability near pH 4 when stored at 80°C (calculated shelf life of 4.59 days, and was least stable at pH 2 (calculated shelf life of 0.38 days.Conclusion: Lincocin® injection was chemically found to have a shelf life of at least 31 days at 25°C when added to sodium lactate (Hartmann’s solution, 0.9% sodium chloride solution, 5% glucose solution, and 10% glucose solution. Solutions prepared at approximately pH 4 are likely to have optimum stability. Keywords: lincomycin, stability, pH, intravenous fluids, IV additives

  6. ESR Study Applied To Thermal Stability Of Radiation-Induced Species Of Solid Ketoprofen

    International Nuclear Information System (INIS)

    Maltar-Strmecki, N.; Katusin-Razem, B.; Razem, D.

    2015-01-01

    Ketoprofen [2-(3-benzoylphenyl) propionic acid] is a non-steroidal anti-inflammatory drug. It has been widely used in human and veterinary medicine. Radiation processing of drugs and its ingredients is recognized as a safe and effective method among the existing technologies for sterilization and protocols that can be found in ISO 11137-1. Radiosterilization of drugs or other medical products by a suitable dose of ionizing radiation conducted in an appropriate environment ensures sterile conditions by destroying or removing vegetative and sporulating microbes from the ingredients or environment. In earlier studies the effects of gamma radiation was evaluated by selected physico-chemical methods and the observations showed that solid ketoprofen is relatively stable toward ionizing irradiation and that radiosterilization might be a suitable method for the sterilization of solid ketoprofen. The studies reported in this work were undertaken to analyse thermal stability of free radicals by accelerated aging method with a view to the determination of shelf-life. The expiration date (shelf-life) of a product is based on evaluation of both, thermal stability of free radicals, as well as on the time evolution of stable radiolysis products. Namely, storage time is determined by the time required by any degradation product in the dosage form to achieve a sufficient level to represent a risk to the patient. This work shows that ESR spectroscopy provides means for determination of thermal stability of radicals induced by gamma-irradiation in solid drugs. Therefore, despite the complex mixture of individual free radicals induced by gamma-irradiation in solid ketoprofen, the overall lifetime of free radicals could be determined by using isothermal and isochronal annealing. This study shows that radicals induced by gamma-irradiation in solid ketoprofen are stable for at least about 6 months. (author).

  7. Theoretical studies on stability and feasibility of 0.34 THz EIK

    Science.gov (United States)

    Li, Shuang; Wang, Jianguo; Wang, Guangqiang; Wang, Dongyang

    2017-05-01

    The stability of the circuit and the tolerance during the manufacture process are theoretically studied in the design of 0.34 THz extended interaction klystron, which are helpful to increase the feasibility of the device. By using the small signal theory, the beam-loading conductance is studied to increase the efficiency of the beam-wave interaction. Combined with the study of start current for oscillation modes, the analysis of stability in multi-gap cavity is proposed, leading to the optimization of cavity. As a crucial factor affecting the ultimate performance of device, the inaccuracy during the fabrication process is researched. The acceptable tolerance is summarized through discussion of various geometrical dimensions' influences on cavity's characteristics. The study of power loss in the conductive wall is presented and the copper is believed to be adapted in making the device practicable with low attenuation. The physical design is simulated and verified by the particle-in-cell (PIC) method, and the results show that the output power of 142 W can be reached steadily at the frequency of 347.7 GHz, approaching the gain of 37.9 dB.

  8. Radiochemical stability of radiopharmaceutical preparations

    International Nuclear Information System (INIS)

    Martins, Patricia de A.; Silva, Jose L. da; Ramos, Marcelo P.S.; Oliveira, Ideli M. de; Felgueiras, Carlos F.; Herrerias, Rosana; Zapparoli Junior, Carlos L.; Mengatti, Jair; Fukumori, Neuza T.O.; Matsuda, Margareth M.N.

    2011-01-01

    The 'in vitro' stability studies of the radiopharmaceutical preparations are an essential requirement for routine practice in nuclear medicine and are an important parameter for evaluating the quality, safety and efficacy required for the sanitary registration of pharmaceutical products. Several countries have published guidelines for the evaluation of pharmaceutical stability. In Brazil, the stability studies should be conducted according to the Guide for Conducting Stability Studies published in the Resolution-RE n. 1, of 29th July 2005. There are also for radiopharmaceutical products, two specific resolutions: RDC-63 regulates the Good Manufacturing Practices for Radiopharmaceuticals and RDC-64 provides the Registration of Radiopharmaceuticals, both published on the 18th December 2009. The radiopharmaceutical stability is defined as the time during which the radioisotope can be safely used for the intended purpose. The radiochemical stability can be affected by a variety of factors, including storage temperature, amount of radioactivity, radioactive concentration, presence or absence of antioxidants or other stabilizing agents. The radiochemical stability studies must be established under controlled conditions determined by the effective use of the product. The aim of this work was to evaluate the radiochemical stability of labeled molecules with 131 I, 123 I, 153 Sm, 18 F, 51 Cr, 177 Lu and 111 In as well as 67 Ga and 201 Tl radiopharmaceuticals. Radiochemical purity was evaluated after production and in the validity period, with the maximum activity and in the recommended storage conditions. The analyses were carried out by thin-layer silica gel plate, paper chromatography and gel chromatography. The experimental results showed to be in accordance with the specified limits for all the analysed products. (author)

  9. The study of stability of Pt-SDB in isotopic exchange between tritium oxide and hydrogen

    International Nuclear Information System (INIS)

    Dan Guiping

    2008-06-01

    The stability of Pt-SDB on its catalytic activity and the Pt contained in Pt-SDB have been studied during three years in isotopic exchange between tritium oxide and hydrogen. The convert efficiency of the catalyst declined 10% in first two years and then it is 2% after another two years, when it is used interruptedly. The losing of Pt on Pt-SDB is separately 9.09% and 2.31% after it is washed 2000 hours by water and immersed in water 525 days. (authors)

  10. Studies of stability and robustness for artificial neural networks and boosted decision trees

    International Nuclear Information System (INIS)

    Yang, H.-J.; Roe, Byron P.; Zhu Ji

    2007-01-01

    In this paper, we compare the performance, stability and robustness of Artificial Neural Networks (ANN) and Boosted Decision Trees (BDT) using MiniBooNE Monte Carlo samples. These methods attempt to classify events given a number of identification variables. The BDT algorithm has been discussed by us in previous publications. Testing is done in this paper by smearing and shifting the input variables of testing samples. Based on these studies, BDT has better particle identification performance than ANN. The degradation of the classifications obtained by shifting or smearing variables of testing results is smaller for BDT than for ANN

  11. Study of the cubic - to - monoclinic transformation in magnesia partially stabilized zirconia

    International Nuclear Information System (INIS)

    Muccillo, R.

    1988-01-01

    The transformation of the cubic phase to the stable monoclinic phase in ZrO 2 : 3%MgO quenched from 1450 0 C to RT has been studied by X-ray diffractometry in order to explain the thermal hysteresis in the electrical conductivity. The monoclinic-to-cubic ratio has been measured for samples annealed in the 500 0 C-1000 0 C temperature range. The results show that the decrease in the cubic phase content is the main responsible for the thermal hysteresis in the electrical conductivity of the magnesia partially stabilized zirconia solid electrolytes. (author) [pt

  12. Self-consistent study of nuclei far from stability with the energy density method

    CERN Document Server

    Tondeur, F

    1981-01-01

    The self-consistent energy density method has been shown to give good results with a small number of parameters for the calculation of nuclear masses, radii, deformations, neutron skins, shell and sub- shell effects. It is here used to study the properties of nuclei far from stability, like densities, shell structure, even-odd mass differences, single-particle potentials and nuclear deformations. A few possible consequences of the results for astrophysical problems are briefly considered. The predictions of the model in the super- heavy region are summarised. (34 refs).

  13. The Usage Behavior and Intention Stability of Nurses: An Empirical Study of a Nursing Information System.

    Science.gov (United States)

    Lin, I-Chun; Lin, Chihung; Hsu, Chien-Lung; Roan, Jinsheng; Yeh, Jehn-Shan; Cheng, Yu-Han

    2016-03-01

    Many prior studies of technology adoption treat user intention as the single predictor of actual usage behavior. However, as many researchers of behavioral science have pointed out, multiple factors mediate the relationship between user intention and usage behavior. The present article explores the factors that mediate the relationship between intention and actual behavior. We develop a conceptual framework that is based on the Technology Acceptance Model III and behavior theory to further elicit system usage behavior and to confirm "intention stability" and "past experience" as two significant mediating factors in this relationship. The target system was a nursing information system that had been recently adopted by a medical center in central Taiwan. Data were collected using a questionnaire survey conducted in two rounds. Two hundred forty-five valid questionnaires were returned (response rate: 49%). Mediated moderation was analyzed to explore the presence of mediators or moderators between intention and behavior. The results support that intention stability is a mediated moderator and that prior experience is a moderator of the relationship between intention and behavior. These two factors increased by over 13.6% the explanatory power of intention on actual behavior. Furthermore, this study expanded the scope of prior research by confirming intention stability as a moderating variable between intention and behavior. Finally, this study identified the moderating effect of past experience on the intention-behavior relationship, indicating that past experience enhances the predictive power of intention on behavior. The findings of this study may assist hospital managers to better understand the nursing information system usage behaviors of nursing staff and to develop ways to enhance the intention stability of these staff. Managers may improve the familiarity of nursing staff with the system by increasing their system-related practice time. More experience should

  14. Laboratory Study of Magnetorotational Instability and Hydrodynamic Stability at Large Reynolds Numbers

    Science.gov (United States)

    Ji, H.; Burin, M.; Schartman, E.; Goodman, J.; Liu, W.

    2006-01-01

    Two plausible mechanisms have been proposed to explain rapid angular momentum transport during accretion processes in astrophysical disks: nonlinear hydrodynamic instabilities and magnetorotational instability (MRI). A laboratory experiment in a short Taylor-Couette flow geometry has been constructed in Princeton to study both mechanisms, with novel features for better controls of the boundary-driven secondary flows (Ekman circulation). Initial results on hydrodynamic stability have shown negligible angular momentum transport in Keplerian-like flows with Reynolds numbers approaching one million, casting strong doubt on the viability of nonlinear hydrodynamic instability as a source for accretion disk turbulence.

  15. A Study of Wind Farm Stabilization Using DFIG or STATCOM Considering Grid Requirements

    Directory of Open Access Journals (Sweden)

    K. E Okedu

    2010-01-01

    Full Text Available Recently, the grid codes require taking into account the reactive power of the wind farm in order to contribute to the networkstability, thus operating the wind farm as active compensator devices. This paper presents a comparative study of stabilizinga wind farm using (Doubly Fed Induction Generators DFIGs or using a (Static Synchronous Compensator STATCOM duringwind speed change and grid fault. Simulation results show that the wind farm could be effectively stabilized with bothsystems, but at a reduced cost with the DFIGs system because it can provide reactive power through its frequency converterswithout an external reactive power compensation unit like the STATCOM system significant.

  16. Study of stability of terrylitine chemically bound with polymer to γ-irradiation

    International Nuclear Information System (INIS)

    Yudanova, T.N.; Skokova, I.F.; Dovbij, E.V.; Kalashnik, A.T.

    1987-01-01

    Using ESR method the mechanism of the increase in stability to γ-irradiation of proteolytic enzyme terrylitine immobilized on cellulose derivatives, has been studied. It is shown that in the process of γ-sterilization by the doses of 25 kGy at the dose rate 1.1 Gy/s migration of terrylitine free valency to macromolecule of polymer-carrier takes place, and in certain cases recombination of enzyme and polymer macroradicals occurs. Due to the fact proteolytic activity of immobilized terrylitine during γ-sterilization does not decrease practically

  17. Experimental study of the effects of swirl and air dilution on biogas non-premixed flame stability

    Directory of Open Access Journals (Sweden)

    Rowhani Amir

    2015-01-01

    Full Text Available An experimental investigation of the stability limits of biogas in a swirling non-premixed burner has been carried out. A mixture of 60% methane (CH4 and 40% carbon dioxide (CO2 was used to reach the typical biogas composition. Vane swirlers with 30º, 45º and 60º angles were used to make the swirling air. The biogas stability limits and flame behavior under swirling conditions were tested. Besides, effects of air dilution with nitrogen (N2 and CO2 on biogas stability limits were investigated. The results show that using swirl can enhance the flame stability limits approximately four or five times comparing to non-swirling air stream. Adding N2/CO2 to the air had negative effects on the flame stability but no changes were observed in the flame structure. The maximum air dilution was also obtained when 27% and 15% N2 was added to the swirling air under strong and weak swirl, respectively.

  18. Consumerism and the Sister Carrie's American Dream%Consumerism and the Sister Carrie''s American Dream

    Institute of Scientific and Technical Information of China (English)

    卢亚丽

    2017-01-01

    From the aspect of consumerism to this text analyze Sister Carrie's"American dream"destruction. The author wholly and deeply analyzes the embodiment of consumerism in Dreiser's Sister Carrie and Dreiser's outlook and values under the effect of consumerism. To prove that the reason for destruction of Carrie's American dream is consumerism.

  19. Stability of buffer-free freeze-dried formulations: A feasibility study of a monoclonal antibody at high protein concentrations.

    Science.gov (United States)

    Garidel, Patrick; Pevestorf, Benjamin; Bahrenburg, Sven

    2015-11-01

    We studied the stability of freeze-dried therapeutic protein formulations over a range of initial concentrations (from 40 to 160 mg/mL) and employed a variety of formulation strategies (including buffer-free freeze dried formulations, or BF-FDF). Highly concentrated, buffer-free liquid formulations of therapeutic monoclonal antibodies (mAbs) have been shown to be a viable alternative to conventionally buffered preparations. We considered whether it is feasible to use the buffer-free strategy in freeze-dried formulations, as an answer to some of the known drawbacks of conventional buffers. We therefore conducted an accelerated stability study (24 weeks at 40 °C) to assess the feasibility of stabilizing freeze-dried formulations without "classical" buffer components. Factors monitored included pH stability, protein integrity, and protein aggregation. Because the protein solutions are inherently self-buffering, and the system's buffer capacity scales with protein concentration, we included highly concentrated buffer-free freeze-dried formulations in the study. The tested formulations ranged from "fully formulated" (containing both conventional buffer and disaccharide stabilizers) to "buffer-free" (including formulations with only disaccharide lyoprotectant stabilizers) to "excipient-free" (with neither added buffers nor stabilizers). We evaluated the impacts of varying concentrations, buffering schemes, pHs, and lyoprotectant additives. At the end of 24 weeks, no change in pH was observed in any of the buffer-free formulations. Unbuffered formulations were found to have shorter reconstitution times and lower opalescence than buffered formulations. Protein stability was assessed by visual inspection, sub-visible particle analysis, protein monomer content, charge variants analysis, and hydrophobic interaction chromatography. All of these measures found the stability of buffer-free formulations that included a disaccharide stabilizer comparable to buffer

  20. Experimental Study of Hydrogen Addition Effects on a Swirl-Stabilized Methane-Air Flame

    Directory of Open Access Journals (Sweden)

    Mao Li

    2017-11-01

    Full Text Available The effects of H2 addition on a premixed methane-air flame was studied experimentally with a swirl-stabilized gas turbine model combustor. Experiments with 0%, 25%, and 50% H2 molar fraction in the fuel mixture were conducted under atmospheric pressure. The primary objectives are to study the impacts of H2 addition on flame lean blowout (LBO limits, flame shapes and anchored locations, flow field characteristics, precessing vortex core (PVC instability, as well as the CO emission performance. The flame LBO limits were identified by gradually reducing the equivalence ratio until the condition where the flame physically disappeared. The time-averaged CH chemiluminescence was used to reveal the characteristics of flame stabilization, e.g., flame structure and stabilized locations. In addition, the inverse Abel transform was applied to the time-averaged CH results so that the distribution of CH signal on the symmetric plane of the flame was obtained. The particle image velocimetry (PIV was used to detect the characteristics of the flow field with a frequency of 2 kHz. The snapshot method of POD (proper orthogonal decomposition and fast Fourier transform (FFT were adopted to capture the most prominent coherent structures in the turbulent flow field. CO emission was monitored with an exhaust probe that was installed close to the combustor exit. The experimental results indicated that the H2 addition extended the flame LBO limits and the operation range of low CO emission. The influence of H2 addition on the flame shape, location, and flow field was observed. With the assistance of POD and FFT, the combustion suppression impacts on PVC was found.

  1. Boron nitride nanotubes coated with organic hydrophilic agents: Stability and cytocompatibility studies

    International Nuclear Information System (INIS)

    Ferreira, Tiago Hilário; Soares, Daniel Crístian Ferreira; Moreira, Luciana Mara Costa; Ornelas da Silva, Paulo Roberto; Gouvêa dos Santos, Raquel; Barros de Sousa, Edésia Martins

    2013-01-01

    In the present study, Boron Nitride Nanotubes (BNNTs) were synthesized and functionalized with organic hydrophilic agents constituted by glucosamine (GA), polyethylene glycol (PEG) 1000 , and chitosan (CH) forming new singular systems. Their size, distribution, and homogeneity were determined by photon correlation spectroscopy, while their surface charge was determined by laser Doppler anemometry. The morphology and structural organization were evaluated by Transmission Electron Microscopy. The functionalization was evaluated by Thermogravimetry analysis and Fourier Transformer Infrared Spectroscopy. The results showed that BNNTs were successfully obtained and functionalized, reaching a mean size and dispersity deemed adequate for in vitro studies. The in vitro stability tests also revealed a good adhesion of functionalized agents on BNNT surfaces. Finally, the in vitro cytocompatibility of functionalized BNNTs against MCR-5 cells was evaluated, and the results revealed that none of the different functionalization agents disturbed the propagation of normal cells up to the concentration of 50 μg/mL. Furthermore, in this concentration, no significantly chromosomal or morphologic alterations or increase in ROS (Reactive Oxygen Species) could be observed. Thus, findings from the present study reveal an important stability and cytocompatibility of functionalized BNNTs as new potential drugs or radioisotope nanocarriers to be applied in therapeutic procedures. - Highlights: • BNNTs were synthesized and functionalized with organic hydrophilic agents. • Hydrophilic molecules do not alter the biocompatibility profile of BNNTs. • No significantly chromosomal or morphologic alterations in ROS could be observed

  2. First principles study of structural stability and site preference in Co3 (W,X

    Directory of Open Access Journals (Sweden)

    Joshi Sri Raghunath

    2014-01-01

    Full Text Available Since the discovery [1] of γ′ precipitate (L12 – Co3(Al, W in the Co-Al-W ternary system, there has been an increased interest in Co-based superalloys. Since these alloys have two phase microstructures (γ + γ′ similar to Ni-based superalloys [2], they are viable candidates in high temperature applications, particularly in land-based turbines. The role of alloying on stability of the γ′ phase has been an active area of research. In this study, electronic structure calculations were done to probe the effect of alloying in Co3W with L12 structure. Compositions of type Co3(W,X, (where X/Y = Mn, Fe, Ni, Pt, Cr , Al, Si, V, W, Ta, Ti, Nb, Hf, Zr and Mo were studied. Effect of alloying on equilibrium lattice parameters and ground state energies was used to calculate Vegard's coefficients and site preference related data. The effect of alloying on the stability of the L12 structure vis a vis other geometrically close packed ordered structures was also studied for a range of Co3X compounds. Results suggest that the penchant of element for the W sublattice can be predicted by comparing heats of formation of Co3X in different structures.

  3. Boron nitride nanotubes coated with organic hydrophilic agents: Stability and cytocompatibility studies

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Tiago Hilário; Soares, Daniel Crístian Ferreira; Moreira, Luciana Mara Costa; Ornelas da Silva, Paulo Roberto [Serviço de Nanotecnologia, Centro de Desenvolvimento da Tecnologia Nuclear CDTN/CNEN, Avenida Presidente Antônio Carlos, 6.627, Campus da UFMG, Pampulha, CEP 31270-901 Belo Horizonte, Minas Gerais (Brazil); Gouvêa dos Santos, Raquel [Laboratório de Radiobiologia, Centro de Desenvolvimento da Tecnologia Nuclear CNEN/CDTN, Av. Presidente Antônio Carlos 6.627, Campus da UFMG, Pampulha, 31270-901 Belo Horizonte, Minas Gerais (Brazil); Barros de Sousa, Edésia Martins, E-mail: sousaem@cdtn.br [Serviço de Nanotecnologia, Centro de Desenvolvimento da Tecnologia Nuclear CDTN/CNEN, Avenida Presidente Antônio Carlos, 6.627, Campus da UFMG, Pampulha, CEP 31270-901 Belo Horizonte, Minas Gerais (Brazil)

    2013-12-01

    In the present study, Boron Nitride Nanotubes (BNNTs) were synthesized and functionalized with organic hydrophilic agents constituted by glucosamine (GA), polyethylene glycol (PEG){sub 1000}, and chitosan (CH) forming new singular systems. Their size, distribution, and homogeneity were determined by photon correlation spectroscopy, while their surface charge was determined by laser Doppler anemometry. The morphology and structural organization were evaluated by Transmission Electron Microscopy. The functionalization was evaluated by Thermogravimetry analysis and Fourier Transformer Infrared Spectroscopy. The results showed that BNNTs were successfully obtained and functionalized, reaching a mean size and dispersity deemed adequate for in vitro studies. The in vitro stability tests also revealed a good adhesion of functionalized agents on BNNT surfaces. Finally, the in vitro cytocompatibility of functionalized BNNTs against MCR-5 cells was evaluated, and the results revealed that none of the different functionalization agents disturbed the propagation of normal cells up to the concentration of 50 μg/mL. Furthermore, in this concentration, no significantly chromosomal or morphologic alterations or increase in ROS (Reactive Oxygen Species) could be observed. Thus, findings from the present study reveal an important stability and cytocompatibility of functionalized BNNTs as new potential drugs or radioisotope nanocarriers to be applied in therapeutic procedures. - Highlights: • BNNTs were synthesized and functionalized with organic hydrophilic agents. • Hydrophilic molecules do not alter the biocompatibility profile of BNNTs. • No significantly chromosomal or morphologic alterations in ROS could be observed.

  4. A game theory model for stabilizing price of chili: A case study

    Science.gov (United States)

    Wardayanti, Ari; Aviv, Afgan Suffan; Sutopo, Wahyudi; Hisjam, Muh.

    2017-11-01

    Chili is one of the important agricultural commodity in Indonesia because of its widely consumption by the Indonesian. Chili becomes one of the commodities that experience price fluctuations and important cause of yearly inflation in Indonesia. The unstable price of chili is affected by the scarcity of the commodity in some months and the difference of the harvest season. This study proposes a model to solve the problem by considering the substitution of fresh chilies with dried chili. We propose the cooperative of chili's farmer as entities that process fresh chili into dry ones. The existence of substitution products is expected to maintain the price stability chili. This research was conducted by taking a case study on chili commodity markets in Surakarta which consists of 19 traditional markets. This study aims to create a price stabilization scheme with product substitution using a game theory model. There are 4 strategies proposed in game theory model to describe the relationship between producers and consumers. In this case, the producers are the farmers and the consumers are the trade market. A mixed strategy of was chosen to determine the optimal value among 4 strategies. From the calculation results obtained optimal value when doing a mixed strategy of IDR 201,188,829,000.

  5. Pterodon pubescens Benth: stability study of microencapsulated extract and isolated compounds monitored by antinociceptive assays

    International Nuclear Information System (INIS)

    Servat, Leila; Spindola, Humberto M.; Carvalho, Joao E. de; Foglio, Mary A.; Rodrigues, Rodney A.F.; Sousa, Ilza M.O.; Ruiz, Ana L.T.G.

    2012-01-01

    Pterodon pubescens Benth. (Pp) seeds, commercially available in Brazil, are used in folk medicine in anti-inflammatory, analgesic, and anti-rheumatic preparations. The present study demonstrated the antinociceptive properties of isomers 6a-hydroxy-7β-acetoxy-vouacapan-17β--oate methyl ester and 6a-acetoxy-7β-hydroxy-vouacapan-17β-oate methyl ester (C1), isolated from (Pp), employing different experimental models. A stability study was performed to investigate the relationship of microencapsulation by spray-drying on the maintenance of antinociceptive action. Therefore, C1 and Pp extract samples were monitored in accelerated stability study, evaluating both microencapsulated and non-microencapsulated samples. It was observed that sample C1 possess antinociceptive activity revealed by writhing and formalin tests; C1 showed significantly anti-allodynic, but not ntihyperalgesic effect; the microencapsulation maintained the activity and integrity of both, sample C1 and Pp crude extract; microencapsulation by spray drying is a useful alternative to increase shelf life. (author)

  6. Design and stability study of an oral solution of amlodipine besylate for pediatric patients.

    Science.gov (United States)

    van der Vossen, A C; van der Velde, I; Smeets, O S N M; Postma, D J; Vermes, A; Koch, B C P; Vulto, A G; Hanff, L M

    2016-09-20

    Amlodipine is an antihypertensive agent recommended for the management of hypertension in children and adolescents. The commercially available tablets of 5 and 10mg do not provide the necessary flexibility in dosing needed for treating children. Our goal was to develop a pediatric oral solution of amlodipine, using a robust manufacturing process suitable for ex-tempora and larger scale production. The parameters API and preservative content, related substances, appearance and pH were studied under four different storage conditions. Samples were analyzed up to 12months. Microbiological quality was studied in an 18-week in-use test based on a two-times daily dosing schedule. The stability of the formulation was influenced by storage conditions and composition. A formulation containing amlodipine besylate, sucrose syrup and methyl paraben remained physically stable for 12months at 4°C with no loss of amlodipine content. Related substances increased during the study but remained below 0.5%. In-use stability was proven up to 18weeks. Storage under refrigerated conditions was necessary to prevent precipitation and to obtain an acceptable shelf-life. In conclusion, we have developed and validated an amlodipine oral solution, suitable for the pediatric population. This liquid formulation is preferred over manipulated commercial dosage forms or non-standardized extemporaneously compounded formulations. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Validation of an analytical method applicable to study of 1 mg/mL oral Risperidone solution stability

    International Nuclear Information System (INIS)

    Abreu Alvarez, Maikel; Garcia Penna, Caridad Margarita; Martinez Miranda, Lissette

    2010-01-01

    A validated analytical method by high-performance liquid chromatography (HPLC) was applicable to study of 1 mg/mL Risperidone oral solution stability. The above method was linear, accurate, specific and exact. A stability study of the 1 mg/mL Risperidone oral solution was developed determining its expiry date. The shelf life study was conducted for 24 months at room temperature; whereas the accelerated stability study was conducted with product under influence of humidity and temperature; analysis was made during 3 months. Formula fulfilled the quality specifications described in Pharmacopeia. The results of stability according to shelf life after 24 months showed that the product maintains the parameters determining its quality during this time and in accelerated studies there was not significant degradation (p> 0.05) in the product. Under mentioned conditions expiry date was of 2 years

  8. Protein thermal stability enhancement by designing salt bridges: a combined computational and experimental study.

    Directory of Open Access Journals (Sweden)

    Chi-Wen Lee

    Full Text Available Protein thermal stability is an important factor considered in medical and industrial applications. Many structural characteristics related to protein thermal stability have been elucidated, and increasing salt bridges is considered as one of the most efficient strategies to increase protein thermal stability. However, the accurate simulation of salt bridges remains difficult. In this study, a novel method for salt-bridge design was proposed based on the statistical analysis of 10,556 surface salt bridges on 6,493 X-ray protein structures. These salt bridges were first categorized based on pairing residues, secondary structure locations, and Cα-Cα distances. Pairing preferences generalized from statistical analysis were used to construct a salt-bridge pair index and utilized in a weighted electrostatic attraction model to find the effective pairings for designing salt bridges. The model was also coupled with B-factor, weighted contact number, relative solvent accessibility, and conservation prescreening to determine the residues appropriate for the thermal adaptive design of salt bridges. According to our method, eight putative salt-bridges were designed on a mesophilic β-glucosidase and 24 variants were constructed to verify the predictions. Six putative salt-bridges leaded to the increase of the enzyme thermal stability. A significant increase in melting temperature of 8.8, 4.8, 3.7, 1.3, 1.2, and 0.7°C of the putative salt-bridges N437K-D49, E96R-D28, E96K-D28, S440K-E70, T231K-D388, and Q277E-D282 was detected, respectively. Reversing the polarity of T231K-D388 to T231D-D388K resulted in a further increase in melting temperatures by 3.6°C, which may be caused by the transformation of an intra-subunit electrostatic interaction into an inter-subunit one depending on the local environment. The combination of the thermostable variants (N437K, E96R, T231D and D388K generated a melting temperature increase of 15.7°C. Thus, this study

  9. Stability and drug dissolution evaluation of Qingkailing soft/hard ...

    African Journals Online (AJOL)

    Purpose: To carry out a post-marketing evaluation of the stability and drug dissolution of ... Stability data from long-term studies showed that within 6 months the ... However, fingerprint pattern statistical analysis showed that the soft capsule is ...

  10. Stabilization of Highway Expansive Soils with High Loss on Ignition ...

    African Journals Online (AJOL)

    This study was carried out to evaluate the effect of high loss on ignition content cement kiln dust on the stabilization of highway expansive soils. Laboratory tests were performed on the natural and stabilized soil samples in accordance with BS 1377 (1990) and BS 1924 (1990), respectively. The preliminary investigation ...

  11. Internet Addiction: Stability and Change

    Science.gov (United States)

    Huang, Chiungjung

    2010-01-01

    This longitudinal study examined five indices of stability and change in Internet addiction: structural stability, mean-level stability, differential stability, individual-level stability, and ipsative stability. The study sample was 351 undergraduate students from end of freshman year to end of junior year. Convergent findings revealed stability…

  12. Synergistic and alkaline stability studies of mixtures of simulated high level waste sludge with selected energetic compounds

    International Nuclear Information System (INIS)

    Fondeur, F.F.

    2000-01-01

    This study examined the stability of mercury oxalate and mercury fulminate in alkaline sludge simulating Savannah River Site waste. These compounds represent two classes of energetic compounds previously speculated as potential components in sludge stored without a supernatant liquid

  13. Formulation, physicochemical characterization and stability study of lithium-loaded microemulsion system.

    Science.gov (United States)

    Mouri, Abdelkader; Legrand, Philippe; El Ghzaoui, Abdeslam; Dorandeu, Christophe; Maurel, Jean Claude; Devoisselle, Jean-Marie

    2016-04-11

    Lithium biocompatible microemulsion based on Peceol(®), lecithin, ethanol and water was studied in attempt to identify the optimal compositions in term of drug content, physicochemical properties and stability. Lithium solubilization in microemulsion was found to be compatible with a drug-surfactant binding model. Lithium ions were predominantly solubilized within lecithin head group altering significantly the interfacial properties of the system. Pseudo-ternary phase diagrams of drug free and drug loaded microemulsions were built at constant ethanol/lecithin weight ratio (40/60). Lithium loaded microemulsion has totally disappeared in the Peceol(®) rich part of phase diagram; critical fractions of lecithin and ethanol were required for the formation of stable microemulsion. The effect of lithium concentration on the properties and physical stability of microemulsions were studied using microscopy, Karl Fischer titrations, rheology analyses, conductivity measurements and centrifugation tests. The investigated microemulsions were found to be stable under accelerated storage conditions. The systems exhibited low viscosity and behaved as Newtonian fluid and no structural transition was shown. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. 3-D studies of the formation and stability of strong ion rings

    International Nuclear Information System (INIS)

    Omelchenko, Yu.A.; Sudan, R.N.

    1996-01-01

    Complex 3-D simulations were conducted in support of the on-going experimental program, FIREX( (Field-Reversed Ion Ring Experiment) launched at the Cornell University to produce an ion ring magnetic field-reversed configuration by injecting an intense annular proton beam across a plasma-filled magnetic cusp region into a neutral gas immersed in a ramped solenoidal magnetic field. Previous axisymmetric PIC simulations performed with the FIRE code have demonstrated that strong ion rings (with a self-magnetic field large enough to reverse the applied field on axis) can be created using this technique on the equipment designed and assembled at Cornell. A new parallel object-oriented 3-D hybrid PIC code FLAME has been created to study questions of extreme importance to the success of the FIREX program, namely, the 3-D injection of a powerful ion beam into a strongly magnetized plasma, formation of a field-reversed ring, and the stability and equilibrium of such rings to toroidal perturbations. Using FLAME, the stability was studied of the ring formation during the injection phase and at later times when the ring is virtually stopped and the applied magnetic field is nearly reversed. The simulations revealed the effect of toroidal aberrations in the axially ramped magnetic field on the ion ring formation. (author). 4 figs., 4 refs

  15. Color stability of microfilled, microhybrid and nanocomposite resins--an in vitro study.

    Science.gov (United States)

    Nasim, Iffat; Neelakantan, Prasanna; Sujeer, R; Subbarao, C V

    2010-01-01

    The aim of this study was to evaluate the effect of two beverages-Tea and Pepsi on the color stability of three different composite resins after a period of 7 and 30 days. Color stability of a microfilled, microhybrid and nanocomposite was evaluated after storage in Tea, a carbonated drink or Distilled Water for 7 and 30 days. Color measurement was done using reflectance spectrophotometer based on the CIE L*a*b* color scale. Mean values of the different groups were compared using three-way analysis of variance and multiple comparisons of the mean values were done using Tukey-Kramer test with 0.05 as significance level. All tested resin composites showed color change after a period of 7 and 30 days. The color change exhibited by all three groups was significantly different for all three beverages studied, at both time periods (pPepsi at the 7th and 30th day. The nanocomposite discolored most in Tea at 7th and 30th day. All efforts should be made to minimize discoloration of composite restorations by adopting excellent polishing techniques. Patients should also be educated on the possibility of the restoration to undergo staining under the influence of beverages. Copyright © 2010 Elsevier Ltd. All rights reserved.

  16. Direct reactions in inverse kinematics for nuclear structure studies far off stability at low incident energies

    International Nuclear Information System (INIS)

    Egelhof, P.

    1997-02-01

    The investigation of light-ion induced direct reactions with exotic beams in inverse kinematics gives access to a wide field of nuclear structure studies in the region far off stability. The present contribution will focus on the investigation of few-nucleon transfer reactions, which turn out to be most favourably studied with good-quality low-energy radioactive beams, as provided by the new generation of radioactive beam facilities presently planned or under construction at Caen, Grenoble, Munich, and elsewhere. An overview on the physics motivation, basically concerning nuclear structure and nuclear astrophysics questions, is given. Of particular interest are the nuclear shell model in the region far off stability, the two-body residual interaction in nuclei, the structure of halo nuclei, as well as the understanding of the r-process scenario. The experimental conditions, along with the experimental concept, for such measurements are discussed with particular emphasis on the kinematical conditions, the observables, as well as the appropriate detection schemes. The concept of a large solid angle TPC ionization chamber as an active target for experiments with low-energy radioactive beams is presented. It turns out to be a highly effective detection scheme, well suited for the present experimental conditions, at least for light exotic beams up to Z∼20. (orig.)

  17. Stability and electronic structure of carbon capsules with superior gas storage properties: A theoretical study

    International Nuclear Information System (INIS)

    Manna, Arun K.; Pati, Swapan K.

    2013-01-01

    Highlights: • Stability and electronic structure of various carbon capsules are studied. • Effects of capsule’s sizes on electronic and optical properties are explored. • Changes in cohesive and formation energy and electronic gap are discussed. • Capsule’s gas storage propensity is addressed using DFT and ab initio MD. • Capsule’s optical absorptions are discussed with and without stored gas molecules. - Abstract: Structures, electronic and optical properties of carbon nanocapsules of varying sizes (length and diameter) are studied using first-principles density functional theory. Based on calculated cohesive energy, formation energy, electronic gap and extent of orbital delocalization, we examine structural stability and changes in low-energy physics of these carbon capsules. We find that both cohesive and formation energy decrease with increase in capsule’s sizes, indicating their greater structural rigidity and favorable formation feasibility. The electronic gap also decreases with increase in capsule’s sizes due to the larger electronic delocalization. The simulated optical absorption spectra show lowering of low-energy peak positions with increase in the capsule’s dimensions, consistent with the reduction in electronic gap. Additionally, we also provide an estimate of gas storage capacity for the larger carbon capsule (C 460 ) considered. We find 7.69 wt.% and 28.08 wt.% storage propensity for hydrogen and carbon dioxide gases, respectively, which clearly suggests their potential use as light storage materials

  18. Characterization and Storage Stability Study of Bixin Extracted from Bixa orellana Using Organic Solvent

    Science.gov (United States)

    Husa, N. N.; Hamzah, F.; Said, H. M.

    2018-05-01

    Colorant is one of the additives to give a better appearance or improve the colour of the product. Synthetic colorant has been widely used in industrial due to its readiness in the market and its colour stability. However the arising issues related to the safety, nutrition and also the therapeutic effect has encouraged users to become more concern about the colouring component. Thus, the present research was conducted in order to produce natural colorant called bixin from Bixa orellana or also known as annatto seeds. The study was focusing on the effect of the solvent on the characteristic and concentration of the extracted bixin. While stability of the bixin during different storage condition was determined to further validate the effectiveness of the solvent. The result indicated that methanol and acetone gave darker of the bixin colour as compared to the water. However, the deterioration rate of the bixin in acetone and methanol were faster as compared to the water. The extracted bixin was analysed using Fourier-transform infrared spectroscopy (FTIR) and spectrophotometer analysis. The strong band for the bixin was observed at absorbance range of 1704 – 1740cm-1. The study indicates that the concentration of the extracted bixin was the highest in methanol which gave 817.7 ppm of bixin. Meanwhile, bixin concentration in acetone and water was 602.9 ppm and 477.19 ppm respectively.

  19. Analytical modelling and study of the stability characteristics of the Advanced Heavy Water Reactor

    International Nuclear Information System (INIS)

    Nayak, A.K.; Vijayan, P.K.; Saha, D.

    2000-04-01

    An analytical model has been developed to study the thermohydraulic and neutronic-coupled density-wave instability in the Indian Advanced Heavy Water Reactor (AHWR) which is a natural circulation pressure tube type boiling water reactor. The model considers a point kinetics model for the neutron dynamics and a lumped parameter model for the fuel thermal dynamics along with the conservation equations of mass, momentum and energy and equation of state for the coolant. In addition, to study the effect of neutron interactions between different parts of the core, the model considers a coupled multipoint kinetics equation in place of simple point kinetics equation. Linear stability theory was applied to reveal the instability of in-phase and out-of-phase modes in the boiling channels of the AHWR. The results indicate that the design configuration considered may experience both Ledinegg and Type I and Type II density-wave instabilities depending on the operating condition. Some methods of suppressing these instabilities were found out. In addition, it was found that the stability behavior of the reactor is greatly influenced by the void reactivity coefficient, fuel time constant, radial power distribution and channel inlet orificing. The delayed neutrons were found to have strong influence on the Type I and Type II instabilities. Decay ratio maps were predicted considering various operating parameters of the reactor, which are useful for its design. (author)

  20. An exploration of the use of simple statistics to measure consensus and stability in Delphi studies

    Directory of Open Access Journals (Sweden)

    Dixon John

    2007-11-01

    Full Text Available Abstract Background The criteria for stopping Delphi studies are often subjective. This study aimed to examine whether consensus and stability in the Delphi process can be ascertained by descriptive evaluation of trends in participants' views. Methods A three round email-based Delphi required participants (n = 12 to verify their level of agreement with 8 statements, write comments on each if they considered it necessary and rank the statements for importance. Each statement was analysed quantitatively by the percentage of agreement ratings, importance rankings and the amount of comments made for each statement, and qualitatively using thematic analysis. Importance rankings between rounds were compared by calculating Kappa values to observe trends in how the process impacts on subject's views. Results Evolution of consensus was shown by increase in agreement percentages, convergence of range with standard deviations of importance ratings, and a decrease in the number of comments made. Stability was demonstrated by a trend of increasing Kappa values. Conclusion Following the original use of Delphi in social sciences, Delphi is suggested to be an effective way to gain and measure group consensus in healthcare. However, the proposed analytical process should be followed to ensure maximum validity of results in Delphi methodology for improved evidence of consensual decision-making.

  1. 3-D studies of the formation and stability of strong ion rings

    Energy Technology Data Exchange (ETDEWEB)

    Omelchenko, Yu A; Sudan, R N [Cornell Univ., Ithaca, NY (United States). Laboratory of Plasma Studies

    1997-12-31

    Complex 3-D simulations were conducted in support of the on-going experimental program, FIREX( (Field-Reversed Ion Ring Experiment) launched at the Cornell University to produce an ion ring magnetic field-reversed configuration by injecting an intense annular proton beam across a plasma-filled magnetic cusp region into a neutral gas immersed in a ramped solenoidal magnetic field. Previous axisymmetric PIC simulations performed with the FIRE code have demonstrated that strong ion rings (with a self-magnetic field large enough to reverse the applied field on axis) can be created using this technique on the equipment designed and assembled at Cornell. A new parallel object-oriented 3-D hybrid PIC code FLAME has been created to study questions of extreme importance to the success of the FIREX program, namely, the 3-D injection of a powerful ion beam into a strongly magnetized plasma, formation of a field-reversed ring, and the stability and equilibrium of such rings to toroidal perturbations. Using FLAME, the stability was studied of the ring formation during the injection phase and at later times when the ring is virtually stopped and the applied magnetic field is nearly reversed. The simulations revealed the effect of toroidal aberrations in the axially ramped magnetic field on the ion ring formation. (author). 4 figs., 4 refs.

  2. Studies on carotenoids and oxidative stability of winter squash seed and soybean oils

    Directory of Open Access Journals (Sweden)

    Helmy, H. E.

    1992-12-01

    Full Text Available Winter squash seed and soybean oils were extracted with commercial hexane. Carotenoids and other pigments m the oils were studied using spectrophotometric and thin layer chromatographic analysis. Three types of pigments were identified: carotenoids. mainly lutein and β-carotene, chlorophyll and some unidentified pigments. Carotenoids content were 70, 60, 0 ppm in crude, refined and bleached winter squash seed oil, and 80, 65, 0 ppm in crude, refined and bleached soybean oil respectively. Stability was evaluated for crude, refined and bleached winter squash seed and soybean oils and an 1:1 admixture. Mixing winter squash seed oil with soybean oil increased the stability of soybean oil. Crude oil showed greater stability than refined and bleached oils.

    Se han extraído con hexano comercial aceites de semilla de calabaza y de soja. Usando análisis espectrofotométrico y cromatografía en capa fina se han estudiado en estos aceites tres tipos de pigmentos: carotenoides, principalmente luteína y β-caroteno, clorofilas y otros no identificados. Los contenidos en carotenoides fueron 70, 60, 0 ppm en aceite de semilla de calabaza de invierno crudo, refinado y decolorado, y 80, 65, 0 ppm en aceite de soja crudo, refinado y decolorado respectivamente. Se ha evaluado la estabilidad de aceites de semilla de calabaza de invierno, soja y una mezcla 1:1 de ambos, en sus estados crudo, refinado y decolorado. La mezcla de semilla de calabaza de invierno con aceite de soja aumentó la estabilidad de este último. El aceite crudo mostró una mayor estabilidad que los aceites refinados y decolorados.

  3. Gyrokinetic Stability Studies of the Microtearing Mode in the National Spherical Torus Experiment H-mode

    International Nuclear Information System (INIS)

    Baumgaertel J.A., Redi M.H., Budny R.V., Rewoldt G., Dorland W.

    2005-01-01

    Insight into plasma microturbulence and transport is being sought using linear simulations of drift waves on the National Spherical Torus Experiment (NSTX), following a study of drift wave modes on the Alcator C-Mod Tokamak. Microturbulence is likely generated by instabilities of drift waves, which cause transport of heat and particles. Understanding this transport is important because the containment of heat and particles is required for the achievement of practical nuclear fusion. Microtearing modes may cause high heat transport through high electron thermal conductivity. It is hoped that microtearing will be stable along with good electron transport in the proposed low collisionality International Thermonuclear Experimental Reactor (ITER). Stability of the microtearing mode is investigated for conditions at mid-radius in a high density NSTX high performance (H-mode) plasma, which is compared to the proposed ITER plasmas. The microtearing mode is driven by the electron temperature gradient, and believed to be mediated by ion collisions and magnetic shear. Calculations are based on input files produced by TRXPL following TRANSP (a time-dependent transport analysis code) analysis. The variability of unstable mode growth rates is examined as a function of ion and electron collisionalities using the parallel gyrokinetic computational code GS2. Results show the microtearing mode stability dependence for a range of plasma collisionalities. Computation verifies analytic predictions that higher collisionalities than in the NSTX experiment increase microtearing instability growth rates, but that the modes are stabilized at the highest values. There is a transition of the dominant mode in the collisionality scan to ion temperature gradient character at both high and low collisionalities. The calculations suggest that plasma electron thermal confinement may be greatly improved in the low-collisionality ITER

  4. Increasing the thermal stability of cellulase C using rules learned from thermophilic proteins: a pilot study.

    Science.gov (United States)

    Németh, Attila; Kamondi, Szilárd; Szilágyi, András; Magyar, Csaba; Kovári, Zoltán; Závodszky, Péter

    2002-05-02

    Some structural features underlying the increased thermostability of enzymes from thermophilic organisms relative to their homologues from mesophiles are known from earlier studies. We used cellulase C from Clostridium thermocellum to test whether thermostability can be increased by mutations designed using rules learned from thermophilic proteins. Cellulase C has a TIM barrel fold with an additional helical subdomain. We designed and produced a number of mutants with the aim to increase its thermostability. Five mutants were designed to create new electrostatic interactions. They all retained catalytic activity but exhibited decreased thermostability relative to the wild-type enzyme. Here, the stabilizing contributions are obviously smaller than the destabilization caused by the introduction of the new side chains. In another mutant, the small helical subdomain was deleted. This mutant lost activity but its melting point was only 3 degrees C lower than that of the wild-type enzyme, which suggests that the subdomain is an independent folding unit and is important for catalytic function. A double mutant was designed to introduce a new disulfide bridge into the enzyme. This mutant is active and has an increased stability (deltaT(m)=3 degrees C, delta(deltaG(u))=1.73 kcal/mol) relative to the wild-type enzyme. Reduction of the disulfide bridge results in destabilization and an altered thermal denaturation behavior. We conclude that rules learned from thermophilic proteins cannot be used in a straightforward way to increase the thermostability of a protein. Creating a crosslink such as a disulfide bond is a relatively sure-fire method but the stabilization may be smaller than calculated due to coupled destabilizing effects.

  5. Consumerism and the Sister Carrie's American Dream

    Institute of Scientific and Technical Information of China (English)

    卢亚丽

    2017-01-01

    From the aspect of consumerism to this text analyze Sister Carrie's"American dream"destruction. The author wholly and deeply analyzes the embodiment of consumerism in Dreiser's Sister Carrie and Dreiser's outlook and values under the effect of consumerism. To prove that the reason for destruction of Carrie's American dream is consumerism.

  6. A novel topical association with zinc oxide, chamomile and aloe vera extracts - stability and safety studies

    Directory of Open Access Journals (Sweden)

    Catarina Reis

    2015-12-01

    Full Text Available Currently, natural products show an enormous potential for pharmaceutical and cosmetic industries. The goals of this study were to formulate and to characterise a novel combination of natural products. Formulations were 1 an oil-in-water emulsion, 2 a water-in-oil emulsion and 3 a cleansing solution. Zinc oxide was chosen as an active ingredient due to its healing properties, and chamomile and aloe vera extracts were chosen due to their antiseptic, anti-inflammatory and tissue regenerating properties. Organoleptic characteristics, pH, viscosity and in vitro efficacy for the most common bacteria and yeast of human skin were evaluated. Preliminary and accelerated stability studies and safety tests were also performed. All optimized products were stable, smooth in texture, effective against bacteria and yeast, and safe, justifying further studies. Results suggest that these novel products might be a promising source of natural compounds with soothing and regenerative properties for skin care.

  7. Stability Analysis and Stabilization of Miduk Heap Leaching Structure, Iran

    Directory of Open Access Journals (Sweden)

    Mehdi Amini

    2013-06-01

    Full Text Available To construct copper heap leaching structures, a stepped heap of ore is placed over an isolated sloping surface and then washed with sulphuric acid. The isolated bed of such a heap consists of some natural and geosynthetic layers. Shear strength parameters between these layers are low, so they form the possible sliding surfaces of the heaps. Economic and environmental considerations call for studying such slides. In this study, firstly, results of the laboratory tests carried on the materials of the heap leaching structures bed are presented. Then, the instability mechanisms of such structures are investigated and proper approaches are summarized for their stabilization. Finally, stability of the Miduk copper heap is evaluated as a case history, and appropriate approaches and their effects are discussed for its stabilization.

  8. Study on carbon carried capacity in coastal city-A case study on Qingdao%沿海城市碳承载力研究——以青岛市为例

    Institute of Scientific and Technical Information of China (English)

    关丽娟; 丁德文; 刘大海; 赵鸣

    2013-01-01

    在构建沿海城市碳承载力评价指标体系的基础上,采用熵权法为指标赋权,构建了沿海城市碳承载力模型,并按照其取值范围将沿海城市碳承载水平划分为严重空载、轻度空载、适载、轻度超载和严重超载五个级别.利用所建模型和2000~ 2009年数据对青岛市碳承载状况进行了分析,研究表明:近几年来青岛市碳承载力状况良好,且2009年青岛市碳承载力为0.9左右,整体处于较为理想的适载状态.影响青岛市碳承载状况的主要因素包括经济增长、环境、能源、产业结构、城市化等方面.青岛市建立低碳发展模式降低碳排放,维持碳承载平衡应从调整产业结构、转变经济发展方式、建立低碳发展的长效机制、保护资源环境、大力开发新能源、发展低碳旅游业和进一步完善区域性碳承载力理论体系等方面努力.%The model of carbon carried capacity in the coastal city was structured on the basis of constructing the evaluation index system of carbon carried capacity in the coastal city. In this model, the weight of each index is determined by adopting the entropy weight method. According to its value scope, carbon carried capacity in the coastal city was divided into five levels: the serious no-load, mild no-load,proper loaded,mild overload and serious overload. The status of carbon carried capacity in Qingdao from 2000 to 2009 was analyzed by the above model. The results show that the carbon carried capacity state of Qingdao was good in resent years and its carbon carried capacity ratio in 2009 is 0.9 or so, which was in the ideal state. The main factors that influence Qingdao' s carbon loaded status including the economic growth, environment, energy, industry structure, urbanization, etc. are described. The low carbon development model for Qingdao should be established, for reducing the carbon emissions and maintaining the carbon loaded balance. It should endeavor to

  9. Evaluation of primary stability of self-tapping and non-self-tapping dental implants. A 12-week clinical study.

    Science.gov (United States)

    Marković, Aleksa; Calvo-Guirado, José Luís; Lazić, Zoran; Gómez-Moreno, Gerardo; Ćalasan, Dejan; Guardia, Javier; Čolic, Snježana; Aguilar-Salvatierra, Antonio; Gačić, Bojan; Delgado-Ruiz, Rafael; Janjić, Bojan; Mišić, Tijana

    2013-06-01

    The aim of this study was to investigate the relationship between surgical techniques and implant macro-design (self-tapping/non-self-tapping) for the optimization of implant stability in the low-density bone present in the posterior maxilla using resonance frequency analysis (RFA). A total of 102 implants were studied. Fifty-six self-tapping BlueSkyBredent® (Bredent GmbH&Co.Kg®, Senden, Germany) and 56 non-self-tapping Standard Plus Straumann® (Institut Straumann AG®, Waldenburg, Switzerland) were placed in the posterior segment of the maxilla. Implants of both types were placed in sites prepared with either lateral bone-condensing or with bone-drilling techniques. Implant stability measurements were performed using RFA immediately after implant placement and weekly during a 12-week follow-up period. Both types of implants placed after bone condensing achieved significantly higher stability immediately after surgery, as well as during the entire 12-week observation period compared with those placed following bone drilling. After bone condensation, there were no significant differences in primary stability or in implant stability after the first week between both implant types. From 2 to 12 postoperative weeks, significantly higher stability was shown by self-tapping implants. After bone drilling, self-tapping implants achieved significantly higher stability than non-self-tapping implants during the entire follow-up period. The outcomes of the present study indicate that bone drilling is not an effective technique for improving implant stability and, following this technique, the use of self-tapping implants is highly recommended. Implant stability optimization in the soft bone can be achieved by lateral bone-condensing technique, regardless of implant macro-design. © 2011 Wiley Periodicals, Inc.

  10. Study of tape casting of Yttria stabilized zirconia for apply in solid oxide fuel cell

    International Nuclear Information System (INIS)

    Santana, Leonardo de Paulo

    2008-01-01

    The hydrogen economy has been risen as new option for supply the growing global demand for energy. A fuel cell is an electrochemical device able to use hydrogen as a energy source. Carbon dioxide (CO 2 ) emission is very low so it is ecologically friendly, once energy is produced by a reaction of hydrogen and oxygen. The production of energy from hydrogen fuelled devices can be done even in small unities and in a distributed way. It can bring energy for isolated communities, where traditional energy distribution systems can not be reached. A fuel cell is composed essentially of 3 components: anode, cathode and the electrolyte. In present days, there are many materials proposed for use as electrolyte in fuel cells. Among then, Yttria stabilized zirconia (YSZ) is the most studied and effectively used in solid oxide fuel cell. Tape casting technology is a cheap, simple and efficient way to cast ceramics slurries in laminates thick enough to be used as components for fuel cells. Considering theses aspects, in this work, ceramic thin film forming was studied using tape casting technology with raw materials prepared from Brazilian zircon ores. It is described in literature that ceramic slurries are generally made from powders with low surface area (often between 0,5 to 10m 2 /g), and the powders used in this study had larger surface area (often between 40 to 80m 2 /g). The use of zeta potential is indicated to study the stability of a suspension of ceramic powders. However, for suspensions with large concentration of solid, it is also necessary to determine the flow curve, because in these conditions, the double electric layer formed during the stabilization of suspensions can be compressed. In the rheological properties study, calcined ceramic powders were classified using a set of ABNT series screens and separated and retained by the de mesh 60 screen. Flow curve of suspension was determined in aqueous suspensions of these powders. For tape casting processing, a binder

  11. Stability Studies of Certain Chemotherapeutic Agents Following Gamma Irradiation and Silver Nanoparticles Conjugation

    International Nuclear Information System (INIS)

    El-Sayyad, Gh.E.S.M.

    2014-01-01

    The Chemical stability of drug is of great importance since it becomes less effective as it undergoes degradation in case of applied of gamma irradiation process. The application of gamma irradiation for different chemotherapeutic agents Such as (ofloxacin, sodium ampicillin, sodium cefotaxime, gentamycin and amoxicillin) and studying the effect of applied doses on chemical structure and biological activity of the irradiated antibiotics compared to unirradiated ones was studied by ultraviolet-Visible spectrophotometer (UV-Visible), Fourier transform infrared spectroscopy measurements (FTIR spectra) and high performance liquid chromatography (HPLC) in addition to microbiological assay were run before and after irradiation to probe any change after irradiation. The results showed that all of the irradiated compounds remain stable and radio resistant; retaining their structure and activity unchanged up to 25 KGy. The radiation-induced AgNPs synthesis is a simple, clean which involves radiolysis of aqueous solution that provides an efficient method to reduce metal ions. Also, in this study, Bacillus megaterium was found to be an effective biological tool for the extracellular biosynthesis of stable AgNPs which are highly stable and this method has advantages over other methods as the organism used here is safe. This study would therefore lead to an easy procedure for producing silver nanoparticles with the added advantage of bio safety. The Synthesized AgNPs exhibit remarkable antimicrobial activity against both Gram-positive and Gram negative bacterial strains regardless of their drug-resistant mechanisms. The bactericidal activity have proved that AgNPs kill bacteria at such low concentrations (units of ppm), which Stability Studies of Certain Chemotherapeutic Agents Following Gamma Irradiation and Silver Nanoparticles Conjugation. do not reveal acute toxic effects on human cell, in addition to overcoming resistance, and lowering cost when compared to conventional

  12. Formulation studies on stability of solid-state proteases for detergent applications

    DEFF Research Database (Denmark)

    Ay, Suzan Biran; Jensen, Anker Degn; Kiil, Søren

    2012-01-01

    Enzymes are one of the most important components in the laundry detergents. They effectively contribute to the washing process by decreasing energy and water consumption, reducing environmental load of detergent products, leaving non-toxic water effluents and providing fabric care. Ensuring prope...... the antioxidant homogeneously with the enzyme was found to provide a better protection than coating the salt as a separate layer due to crack formation and/or deliquescence of Na2S2O3 at high humidity.......-dried detergent protease, Savinase, were determined in a newly developed experimental setup, providing rapid assessment of solid-state enzyme stability under oxidizing conditions. The method was based on exposure of an enzyme column to known concentrations of H2O2 (g) and humidity in a thermally stabilized...... that, the inactivation was caused by single-oxidation of the enzyme at Met222 residue. Formulation studies revealed that, having an anti-oxidative property,Na2S2O3 had a better activity-preservation effect compared to Na2CO3, retaining 80% and 60% residual activity, respectively. In addition, mixing...

  13. A Study on stabilization of energy supply and demand using foreign futures market

    Energy Technology Data Exchange (ETDEWEB)

    Yun, Won Chul; Lee, Sung Keun [Korea Energy Economics Institute, Euiwang (Korea)

    1999-02-01

    This study seeks to minimize financial cost related to the price stabilization and the supply and demand stabilization. In order to accomplish this, it derives a theoretical model of supply hedging to minimize fluctuation risk of price and financial cost intended for crude oil and LNG. Through the positive analysis based on this, it analyzes quantitatively the economic effect of utilizing foreign futures market. It shows the decline of average and divergence of supply cost. Despite the economic effect of utilizing a futures market, the degree of utilizing energy futures market of related firms in Korea appeared to be insufficient. To raise the utilization of trading in futures, the followings were suggested. Firstly, cost reduction and sharing relating information can be designed through the joint participation among allied enterprises. Secondly, energy futures transaction center in Korea can be established or trading linkage based on the existing international trading system can be built. Thirdly, it is possible to subsidize related cost by making a loan from trading in futures. Lastly, the participating directly in a futures market at government level can be considered. (author). 61 refs., 57 figs., 22 tabs.

  14. Experimental studies of the MHD stability of non-circular Extrap Z-pinches

    International Nuclear Information System (INIS)

    Drake, J.R.

    1985-01-01

    Extrap Z-pinches, which can be sustained for many Alfven times, can be characterized as non-circular Z-pinch discharges bounded by a magnetic separatrix acting somewhat like a limiter. The magnetic separatrix is produced when a vacuum magnetic field, generated by currents in external conductors, combines with the self-magnetic field produced by the discharge current. The separatrix deforms the pinch cross-section and affects the equilibrium at the pinch boundary; both effects improve stability. Experiments have been performed which indicate that both effects are necessary for the successful generation of sustained Extrap discharges. In one experiment, the importance of the non-circularity of the cross-section was investigated. The deformation provided by the vacuum field can provide regions in the discharge where field lines have good curvature, which improves the stability of the configuration against internal modes. In configurations apparently lacking good curvature, discharges could not be sustained. In a second experiment, the dependence of the amplitude of global kink instabilities on the discharge current density profile were studied. The behaviour of the modes was consistent with that which would be expected for surface current-driven modes. (orig.)

  15. Experimental studies of the MHD stability of non-circular extrap Z-pinches

    International Nuclear Information System (INIS)

    Drake, J.R.

    1984-12-01

    Extrap Z-pinches, which can be sustained for many Alfven times, can be characterized as non-circular Z-pinch discharges bounded by a magnetic separatrix acting somewhat like a limiter. The magnetic separatrix is produced when a vacuum magnetic field, generated by currents in external conductors, combines with the self-magnetic field produced by the discharge current. The separatrix deforms the pinch cross-section and affects the equilibrium at the pinch boundary; both effects improve stability. Experiments have been performed which indicate that both effects are necessary for the successful generation of sustained Extrap discharges. In one experiment, the importance of the non-circularity of the cross-section was investigated. The deformation provided by the vacuum field can provide regions in the discharge where field lines have good curvature, which improves the stability of the configuration against internal modes. In configurations apparently lacking good curvature, discharges could not be sustained. In a second experiment, the dependence of the amplitude of global kink instabilities on the discharge current density profile were studied. The behaviour of the modes was consistent with that which would be expected for surface current-driven modes. (Author)

  16. A molecular dynamics study of the nucleation, thermal stability and nanomechanics of carbon nanocones

    International Nuclear Information System (INIS)

    Tsai, P-C; Fang, T-H

    2007-01-01

    In this study, the nucleation mechanism of carbon nanocones is investigated using molecular dynamics (MD) simulations and structural analyses and is compared with that of carbon nanotubes. It is shown that the structural stability of carbon nanocones is sensitive to the cone apex angle. Specifically, an increase in the conical angle results in a moderate improvement in the structural stability of the nanocone as a result of a lower strain energy in the capped mantle. The simulation results also show that the melting temperature of the nanocone increases with increasing conical angle. Furthermore, it is observed that a metastable tube-like structure is formed in carbon nanocones with a lower conical angle at temperatures ranging from 2400 to 3600 K. Finally, the numerical simulations reveal that the mechanical properties of carbon nanocones under nanoindentation are strongly dependent on the conical angle. For carbon nanocones with a large conical angle, the high deformation-promoted reactivity and reversible mechanical response have been performed due to highly symmetrical networks

  17. EXPERIMENTAL STUDY ON THE STABILITY OF SURROUNDING ROCK IN TUNNEL BLASTING CONSTRUCTION

    Directory of Open Access Journals (Sweden)

    Hongxian Fu

    2018-04-01

    Full Text Available In this study, criteria and blasting technologies are introduced in order to control the stability of surrounding rock of tunnel built using drill-and-blast safety. The paper is composed of three parts, namely, a blast vibration propagation law in roof surrounding rock in close proximity to tunnel face, two formulae to calculate particle critical vibration velocity of shotcrete and key structural element at the roof of tunnel, and innovative technologies of tunnel blasting. The blast vibration propagation law is the base to control the stability of surrounding rock during tunnel blasting. Based on Morhr-Coulomb criterion and the dynamic analysis, two formulae to calculate the critical particle vibration velocity are proposed. Based on a series of trial blasts using electronic detonators, two innovative blasting technologies are derived. One is the blast holes detonated one by one by using electronic detonator, and another is the blast holes detonated by combining initiation system of electronic detonators and nonel detonators. The use of electronic detonators in tunnel blasting not only leads to a smaller blast vibration but also to a smaller extent of the EDZ (excavation damaged zone.

  18. Stability study of polyacrylic acid films plasma-polymerized on polypropylene substrates at medium pressure

    Energy Technology Data Exchange (ETDEWEB)

    Morent, Rino, E-mail: Rino.Morent@Ugent.be [Department of Applied Physics, Research Unit Plasma Technology, Faculty of Engineering, Ghent University, Jozef Plateaustraat 22, 9000 Ghent (Belgium); De Geyter, Nathalie [Department of Applied Physics, Research Unit Plasma Technology, Faculty of Engineering, Ghent University, Jozef Plateaustraat 22, 9000 Ghent (Belgium); Trentesaux, Martine; Gengembre, Leon [Unite de Catalyse et Chimie du Solide, UMR CNRS 8181, Universite des Sciences et Technologies de Lille, Bat. C3, Cite Scientifique, 59655 Villeneuve d' Ascq (France); Dubruel, Peter [Department of Organic Chemistry, Polymer Chemistry and Biomaterials Research Group, Faculty of Sciences, Ghent University, Krijgslaan 281, 9000 Ghent (Belgium); Leys, Christophe [Department of Applied Physics, Research Unit Plasma Technology, Faculty of Engineering, Ghent University, Jozef Plateaustraat 22, 9000 Ghent (Belgium); Payen, Edmond [Unite de Catalyse et Chimie du Solide, UMR CNRS 8181, Universite des Sciences et Technologies de Lille, Bat. C3, Cite Scientifique, 59655 Villeneuve d' Ascq (France)

    2010-11-01

    Plasma polymerization of acrylic acid has become an interesting research subject, since these coatings are expected to be beneficial for biomedical applications due to their high surface density of carboxylic acid functional groups. However, the application of these monomers is counteracted by their low stability in humid environments, since a high stability is a required characteristic for almost any biological application. The present work investigates whether it is possible to obtain stable deposits with a high retention of carboxylic acid functions by performing plasma polymerization on polypropylene substrates with a dielectric barrier discharge operating at medium pressure. In order to obtain coatings with the desired properties, the plasma parameters need to be optimized. Therefore, in this paper, the influence of discharge power and location of the substrate in the discharge chamber is examined in detail. The properties of the deposited films are studied using contact angle measurements, X-ray photoelectron spectroscopy, atomic force microscopy and Fourier transform infrared spectroscopy. Moreover, to determine whether the obtained deposits are soluble in water, the coatings are once again analyzed after rinsing in water. This paper will clearly show that stable COOH-rich surfaces can be obtained at high discharge power and close to the monomer inlet, which might open perspectives for future biomedical applications.

  19. Stability study of MMC tubes and advanced assemblies for telescope structures

    Science.gov (United States)

    Nivet-Lutz, Martine; Pommatau, Gilles

    2017-11-01

    This paper presents new advances concerning the development of an Aluminum Matrix Composite for dimensionally stable satellite structures. Feasibility of thermally stable thin-walled tubes have been acquired through microstructure observation and Coefficient of Thermal Expansion measurement. In order to fit the thermo-mechanical stability domain of tubes on specifications, 3 thermal cycles have been tested, regarding to relaxation of internal stress and changes in macroscopic thermo-mechanical properties. Experimental expansion curves and microstructure observation show that thermal treatments permitts such a good fitting. For a better understanding of physical internal phenomena, internal stress has been measured by neutron diffraction on tube samples after each thermal treatment. Results show a significant decrease of stress due to cycling in cold temperature. In order to decrease the absolute value of CTE of assemblies, a new concept of thermo-mechanical stable linkage has been developped, which consists in a common alumlinum infiltration of superposed carbon preforms. Structural bonding, which usually affects stability properties and impose surface treatments and polymerization, can so be avoided. The study has been achieved through CNES (Centre National d'Etudes Spatiales) and French Ministry of Defense (DGA) supports.

  20. Estimating the wake deflection downstream of a wind turbine in different atmospheric stabilities: an LES study

    Directory of Open Access Journals (Sweden)

    L. Vollmer

    2016-09-01

    Full Text Available An intentional yaw misalignment of wind turbines is currently discussed as one possibility to increase the overall energy yield of wind farms. The idea behind this control is to decrease wake losses of downstream turbines by altering the wake trajectory of the controlled upwind turbines. For an application of such an operational control, precise knowledge about the inflow wind conditions, the magnitude of wake deflection by a yawed turbine and the propagation of the wake is crucial. The dependency of the wake deflection on the ambient wind conditions as well as the uncertainty of its trajectory are not sufficiently covered in current wind farm control models. In this study we analyze multiple sources that contribute to the uncertainty of the estimation of the wake deflection downstream of yawed wind turbines in different ambient wind conditions. We find that the wake shapes and the magnitude of deflection differ in the three evaluated atmospheric boundary layers of neutral, stable and unstable thermal stability. Uncertainty in the wake deflection estimation increases for smaller temporal averaging intervals. We also consider the choice of the method to define the wake center as a source of uncertainty as it modifies the result. The variance of the wake deflection estimation increases with decreasing atmospheric stability. Control of the wake position in a highly convective environment is therefore not recommended.