Studies on Structural and Morphological Properties of Multidoped Ceria Ce0.8Nd0.0025Sm0.0025Gd0.005Dy0.095Y0.095O2-δ (x=0.2 as Solid Solutions

Directory of Open Access Journals (Sweden)

Marija Stojmenović

2016-01-01

Full Text Available The nanopowdery solid solutions of multidoped ceria Ce0.8Nd0.0025Sm0.0025Gd0.005Dy0.095Y0.095O2-δ (x=0.2 with the fluorite type crystal structure of CeO2 were synthesized for the first time. Two synthesis procedures were applied: the modified glycine-nitrate procedure (MGNP method and room temperature self-propagating reaction (SPRT method. All nanopowders were characterized by XRPD analysis, Raman spectroscopy, low temperature nitrogen physisorption, TEM, and SEM methods. According to the XRPD and Raman spectroscopy results, single phase solid solutions of fluorite structure were evidenced regardless of the number of dopants and synthesis procedure. Both XRPD and TEM were analyses evidenced nanometer particle dimensions. The SPRT method results in obtaining sample with higher specific surface area, smaller crystallite and particles sizes, and the same values of the lattice parameter in comparison to pure CeO2. Raman spectroscopy was confirmed to the oxygen vacancies introduced into the ceria lattice when Ce4+ ions were replaced with cations (dopants of lower valence state (3+, which may indicate the potential improvement of ionic conductivity. Additionally, the presence of oxygen vacancies in the lattice ceria, as well as very developed grain boundaries, gives a new possibility for potential application of obtained nanopowders in the area of room temperature ferromagnetism as spintronics.

Studies on Structural and Morphological Properties of Multidoped Ceria Ce 0.8 Nd 0.0025 Sm 0.0025 Gd 0.005 Dy 0.095 Y 0.095 O 2 - δ ( x = 0.2 ) as Solid Solutions

KAUST Repository

Stojmenović, Marija

2016-04-17

The nanopowdery solid solutions of multidoped ceria Ce0.8Nd0.0025Sm0.0025Gd0.005Dy0.095Y0.095 () with the fluorite type crystal structure of CeO2 were synthesized for the first time. Two synthesis procedures were applied: the modified glycine-nitrate procedure (MGNP method) and room temperature self-propagating reaction (SPRT method). All nanopowders were characterized by XRPD analysis, Raman spectroscopy, low temperature nitrogen physisorption, TEM, and SEM methods. According to the XRPD and Raman spectroscopy results, single phase solid solutions of fluorite structure were evidenced regardless of the number of dopants and synthesis procedure. Both XRPD and TEM were analyses evidenced nanometer particle dimensions. The SPRT method results in obtaining sample with higher specific surface area, smaller crystallite and particles sizes, and the same values of the lattice parameter in comparison to pure CeO2. Raman spectroscopy was confirmed to the oxygen vacancies introduced into the ceria lattice when Ce4+ ions were replaced with cations (dopants) of lower valence state (3+), which may indicate the potential improvement of ionic conductivity. Additionally, the presence of oxygen vacancies in the lattice ceria, as well as very developed grain boundaries, gives a new possibility for potential application of obtained nanopowders in the area of room temperature ferromagnetism as spintronics.

A novel approach for small sample size family-based association studies: sequential tests.

Science.gov (United States)

Ilk, Ozlem; Rajabli, Farid; Dungul, Dilay Ciglidag; Ozdag, Hilal; Ilk, Hakki Gokhan

2011-08-01

In this paper, we propose a sequential probability ratio test (SPRT) to overcome the problem of limited samples in studies related to complex genetic diseases. The results of this novel approach are compared with the ones obtained from the traditional transmission disequilibrium test (TDT) on simulated data. Although TDT classifies single-nucleotide polymorphisms (SNPs) to only two groups (SNPs associated with the disease and the others), SPRT has the flexibility of assigning SNPs to a third group, that is, those for which we do not have enough evidence and should keep sampling. It is shown that SPRT results in smaller ratios of false positives and negatives, as well as better accuracy and sensitivity values for classifying SNPs when compared with TDT. By using SPRT, data with small sample size become usable for an accurate association analysis.

Day/night difference in extradural cortical stimulation for motor relearning in a subacute stroke rat model.

Science.gov (United States)

Kim, Joo Yeon; Sun, Woong; Park, Eunhee; Lee, Jiyeong; Kim, Hyun; Shin, Yong-Il; Kim, Yun-Hee; Chang, Won Hyuk

2016-02-24

The aim of this study was to assess the proper timing of extradural cortical stimulation (ECS) on the motor relearning in a rat model of subacute photothrombotic stroke. Photothrombotic infarction was induced on the dominant sensorimotor cortex in male Sprague-Dawley rats after training in a single-pellet reaching task (SPRT). Rats were randomly divided into three groups after stroke: ECS during the inactive period (Day-ECS group), ECS during the active period (Night-ECS group) and no ECS (Non-stimulated group). Six sham-operated rats were assigned to the control group. The Day- and Night-ECS group received continuous ECS for 12 hours during the day or night for 2 weeks from day 4 after the stroke. Behavioral assessment with SPRT was performed daily. SPRT showed a significantly faster and greater improvement in the Day and Night-ECS groups than in the Non-stimulated group. In the Day- and Night-ECS groups, the success rate of SPRT differed significantly from Non-stimulated group on day 11 and day 8, respectively. In addition, the Night-ECS group showed a significantly higher SPRT success rate than the Day-ECS group from days 10 to 13. ECS during the active period might be more effective for motor relearning in the subacute stroke rat model.

A neutron portal monitor for vehicles

International Nuclear Information System (INIS)

Coop, K.L.; Fehlau, P.E.; Atwater, H.F.

1987-01-01

We have designed and built a portal vehicle monitoring systems for detecting neutron-emitting special nuclear material (SNM) such as plutonium. Monte Carlo calculations were used to optimize the design of the 15-cm-deep x 122-cm-high x 244-cm-long detector chambers, which utilize 3 He proportional counters inside a hollow polyethylene box. Results for a variety of parametric studies, including polyethylene thickness and detector number, are described. Our experimental measurements are in good agreement with the computer calculations. The monitor's decision logic uses the Sequential Probability Ratio Test (SPRT) on Poisson distributed counting data, which is superior to other statistical tests in many applications. We performed computer simulations of the SPRT logic to determine expected false-positive decision rates. A controller unit of our design that uses this SPRT was built commercially. The cost of the complete monitoring system is similar to that of vehicle portal monitors that detect gamma rays. This new neutron monitor can serve as an addition to standard gamma-ray vehicle portals or as a stand-alone portal monitor in particular safeguards monitoring situations. The monitor is being tested at Los Alamos and is scheduled for in-plant evaluation of another DOE facility in 1987. 7 refs

A neuro-fuzzy inference system for sensor monitoring

International Nuclear Information System (INIS)

Na, Man Gyun

2001-01-01

A neuro-fuzzy inference system combined with the wavelet denoising, PCA (principal component analysis) and SPRT (sequential probability ratio test) methods has been developed to monitor the relevant sensor using the information of other sensors. The paramters of the neuro-fuzzy inference system which estimates the relevant sensor signal are optimized by a genetic algorithm and a least-squares algorithm. The wavelet denoising technique was applied to remove noise components in input signals into the neuro-fuzzy system. By reducing the dimension of an input space into the neuro-fuzzy system without losing a significant amount of information, the PCA was used to reduce the time necessary to train the neuro-fuzzy system, simplify the structure of the neuro-fuzzy inference system and also, make easy the selection of the input signals into the neuro-fuzzy system. By using the residual signals between the estimated signals and the measured signals, the SPRT is applied to detect whether the sensors are degraded or not. The proposed sensor-monitoring algorithm was verified through applications to the pressurizer water level, the pressurizer pressure, and the hot-leg temperature sensors in pressurized water reactors

A Neuro-Fuzzy Inference System Combining Wavelet Denoising, Principal Component Analysis, and Sequential Probability Ratio Test for Sensor Monitoring

International Nuclear Information System (INIS)

Na, Man Gyun; Oh, Seungrohk

2002-01-01

A neuro-fuzzy inference system combined with the wavelet denoising, principal component analysis (PCA), and sequential probability ratio test (SPRT) methods has been developed to monitor the relevant sensor using the information of other sensors. The parameters of the neuro-fuzzy inference system that estimates the relevant sensor signal are optimized by a genetic algorithm and a least-squares algorithm. The wavelet denoising technique was applied to remove noise components in input signals into the neuro-fuzzy system. By reducing the dimension of an input space into the neuro-fuzzy system without losing a significant amount of information, the PCA was used to reduce the time necessary to train the neuro-fuzzy system, simplify the structure of the neuro-fuzzy inference system, and also, make easy the selection of the input signals into the neuro-fuzzy system. By using the residual signals between the estimated signals and the measured signals, the SPRT is applied to detect whether the sensors are degraded or not. The proposed sensor-monitoring algorithm was verified through applications to the pressurizer water level, the pressurizer pressure, and the hot-leg temperature sensors in pressurized water reactors

Studies on Structural and Morphological Properties of Multidoped Ceria Ce 0.8 Nd 0.0025 Sm 0.0025 Gd 0.005 Dy 0.095 Y 0.095 O 2 - δ ( x = 0.2 ) as Solid Solutions

KAUST Repository

Stojmenović, Marija; Pagnacco, Maja C.; Dodevski, Vladimir; Gulicovski, Jelena; Zunic, Milan; Bošković, Snežana

2016-01-01

spectroscopy results, single phase solid solutions of fluorite structure were evidenced regardless of the number of dopants and synthesis procedure. Both XRPD and TEM were analyses evidenced nanometer particle dimensions. The SPRT method results in obtaining

F-centre luminescence in nanocrystalline CeO2

International Nuclear Information System (INIS)

Aškrabić, S; Dohčević-Mitrović, Z D; Araújo, V D; Ionita, G; De Lima, M M Jr; Cantarero, A

2013-01-01

Nanocrystalline CeO 2 powders were synthesized by two cost-effective methods: the self-propagating room temperature (SPRT) method and the precipitation method. Differently prepared samples exhibited different temperature-dependent photoluminescence (PL) in the ultraviolet and visible regions. The PL signals originated from different kinds of oxygen-deficient defect centres with or without trapped electrons (F 0 , F + or F ++ centres). The temperature-dependent PL spectra were measured using different excitation lines, below (457, 488 and 514 nm) or comparable (325 nm) to the ceria optical band gap energy, in order to investigate the positions of intragap localized defect states. Evidence for the presence of F + centres was supported by the signals observed in electron paramagnetic resonance (EPR) measurements. Based on PL and EPR measurements it was shown that F + centres dominate in the CeO 2 sample synthesized by the SPRT method, whereas F 0 centres are the major defects in the CeO 2 sample synthesized by the precipitation method. The luminescence from F ++ states, as shallow trap states, was registered in both samples. Energy level positions of these defect states in the ceria band gap were proposed. (paper)

F-centre luminescence in nanocrystalline CeO2

Science.gov (United States)

Aškrabić, S.; Dohčević-Mitrović, Z. D.; Araújo, V. D.; Ionita, G.; de Lima, M. M., Jr.; Cantarero, A.

2013-12-01

Nanocrystalline CeO2 powders were synthesized by two cost-effective methods: the self-propagating room temperature (SPRT) method and the precipitation method. Differently prepared samples exhibited different temperature-dependent photoluminescence (PL) in the ultraviolet and visible regions. The PL signals originated from different kinds of oxygen-deficient defect centres with or without trapped electrons (F0, F+ or F++ centres). The temperature-dependent PL spectra were measured using different excitation lines, below (457, 488 and 514 nm) or comparable (325 nm) to the ceria optical band gap energy, in order to investigate the positions of intragap localized defect states. Evidence for the presence of F+ centres was supported by the signals observed in electron paramagnetic resonance (EPR) measurements. Based on PL and EPR measurements it was shown that F+ centres dominate in the CeO2 sample synthesized by the SPRT method, whereas F0 centres are the major defects in the CeO2 sample synthesized by the precipitation method. The luminescence from F++ states, as shallow trap states, was registered in both samples. Energy level positions of these defect states in the ceria band gap were proposed.

The Sequential Probability Ratio Test: An efficient alternative to exact binomial testing for Clean Water Act 303(d) evaluation.

Science.gov (United States)

Chen, Connie; Gribble, Matthew O; Bartroff, Jay; Bay, Steven M; Goldstein, Larry

2017-05-01

The United States's Clean Water Act stipulates in section 303(d) that states must identify impaired water bodies for which total maximum daily loads (TMDLs) of pollution inputs into water bodies are developed. Decision-making procedures about how to list, or delist, water bodies as impaired, or not, per Clean Water Act 303(d) differ across states. In states such as California, whether or not a particular monitoring sample suggests that water quality is impaired can be regarded as a binary outcome variable, and California's current regulatory framework invokes a version of the exact binomial test to consolidate evidence across samples and assess whether the overall water body complies with the Clean Water Act. Here, we contrast the performance of California's exact binomial test with one potential alternative, the Sequential Probability Ratio Test (SPRT). The SPRT uses a sequential testing framework, testing samples as they become available and evaluating evidence as it emerges, rather than measuring all the samples and calculating a test statistic at the end of the data collection process. Through simulations and theoretical derivations, we demonstrate that the SPRT on average requires fewer samples to be measured to have comparable Type I and Type II error rates as the current fixed-sample binomial test. Policymakers might consider efficient alternatives such as SPRT to current procedure. Copyright © 2017 Elsevier Ltd. All rights reserved.

Bilateral Comparison of Mercury and Gallium Fixed-Point Cells Using Standard Platinum Resistance Thermometer

Science.gov (United States)

Bojkovski, J.; Veliki, T.; Zvizdić, D.; Drnovšek, J.

2011-08-01

The objective of project EURAMET 1127 (Bilateral comparison of triple point of mercury and melting point of gallium) in the field of thermometry is to compare realization of a triple point of mercury (-38.8344 °C) and melting point of gallium (29.7646 °C) between the Slovenian national laboratory MIRS/UL-FE/LMK and the Croatian national laboratory HMI/FSB-LPM using a long-stem 25 Ω standard platinum resistance thermometer (SPRT). MIRS/UL/FE-LMK participated in a number of intercomparisons on the level of EURAMET. On the other hand, the HMI/LPM-FSB laboratory recently acquired new fixed-point cells which had to be evaluated in the process of intercomparisons. A quartz-sheathed SPRT has been selected and calibrated at HMI/LPM-FSB at the triple point of mercury, the melting point of gallium, and the water triple point. A second set of measurements was made at MIRS/UL/FE-LMK. After its return, the SPRT was again recalibrated at HMI/LPM-FSB. In the comparison, the W value of the SPRT has been used. Results of the bilateral intercomparison confirmed that the new gallium cell of the HMI/LPM-FSB has a value that is within uncertainty limits of both laboratories that participated in the exercise, while the mercury cell experienced problems. After further research, a small leakage in the mercury fixed-point cell has been found.

Risk assessment theory, methods, and applications

CERN Document Server

Rausand, Marvin

2011-01-01

With its balanced coverage of theory and applications along with standards and regulations, Risk Assessment: Theory, Methods, and Applications serves as a comprehensive introduction to the topic. The book serves as a practical guide to current risk analysis and risk assessment, emphasizing the possibility of sudden, major accidents across various areas of practice from machinery and manufacturing processes to nuclear power plants and transportation systems. The author applies a uniform framework to the discussion of each method, setting forth clear objectives and descriptions, while also shedding light on applications, essential resources, and advantages and disadvantages. Following an introduction that provides an overview of risk assessment, the book is organized into two sections that outline key theory, methods, and applications. * Introduction to Risk Assessment defines key concepts and details the steps of a thorough risk assessment along with the necessary quantitative risk measures. Chapters outline...

Applicabilities of ship emission reduction methods

Energy Technology Data Exchange (ETDEWEB)

Guleryuz, Adem [ARGEMAN Research Group, Marine Division (Turkey)], email: ademg@argeman.org; Kilic, Alper [Istanbul Technical University, Maritime Faculty, Marine Engineering Department (Turkey)], email: enviromarineacademic@yahoo.com

2011-07-01

Ships, with their high consumption of fossil fuels to power their engines, are significant air polluters. Emission reduction methods therefore need to be implemented and the aim of this paper is to assess the advantages and disadvantages of each emissions reduction method. Benefits of the different methods are compared, with their disadvantages and requirements, to determine the applicability of such solutions. The methods studied herein are direct water injection, humid air motor, sea water scrubbing, diesel particulate filter, selected catalytic reduction, design of engine components, exhaust gas recirculation and engine replacement. Results of the study showed that the usefulness of each emissions reduction method depends on the particular case and that an evaluation should be carried out for each ship. This study pointed out that methods to reduce ship emissions are available but that their applicability depends on each case.

Advanced scientific computational methods and their applications of nuclear technologies. (1) Overview of scientific computational methods, introduction of continuum simulation methods and their applications (1)

International Nuclear Information System (INIS)

Oka, Yoshiaki; Okuda, Hiroshi

2006-01-01

Scientific computational methods have advanced remarkably with the progress of nuclear development. They have played the role of weft connecting each realm of nuclear engineering and then an introductory course of advanced scientific computational methods and their applications to nuclear technologies were prepared in serial form. This is the first issue showing their overview and introduction of continuum simulation methods. Finite element method as their applications is also reviewed. (T. Tanaka)

Advanced scientific computational methods and their applications to nuclear technologies. (3) Introduction of continuum simulation methods and their applications (3)

International Nuclear Information System (INIS)

Satake, Shin-ichi; Kunugi, Tomoaki

2006-01-01

Scientific computational methods have advanced remarkably with the progress of nuclear development. They have played the role of weft connecting each realm of nuclear engineering and then an introductory course of advanced scientific computational methods and their applications to nuclear technologies were prepared in serial form. This is the third issue showing the introduction of continuum simulation methods and their applications. Spectral methods and multi-interface calculation methods in fluid dynamics are reviewed. (T. Tanaka)

Optical model calculations of nucleon interactions with 93Nb, from 10 keV up to 50 MeV

International Nuclear Information System (INIS)

Lagrange, C.

1979-01-01

The neutron spherical optical potential is determined following the SPRT method by a fit to strength functions, scattering radius, total cross section and neutron elastic scattering data. Comparison to the potential obtained with existing proton scattering data, (p,p) (p,n), provides a basis for the determination of the complex symmetry term of the optical potential. Calculations using the J.L.M. optical model will be also presented and discussed. 18 references

Silver nanoparticles: Synthesis methods, bio-applications and properties.

Science.gov (United States)

Abbasi, Elham; Milani, Morteza; Fekri Aval, Sedigheh; Kouhi, Mohammad; Akbarzadeh, Abolfazl; Tayefi Nasrabadi, Hamid; Nikasa, Parisa; Joo, San Woo; Hanifehpour, Younes; Nejati-Koshki, Kazem; Samiei, Mohammad

2016-01-01

Silver nanoparticles size makes wide range of new applications in various fields of industry. Synthesis of noble metal nanoparticles for applications such as catalysis, electronics, optics, environmental and biotechnology is an area of constant interest. Two main methods for Silver nanoparticles are the physical and chemical methods. The problem with these methods is absorption of toxic substances onto them. Green synthesis approaches overcome this limitation. Silver nanoparticles size makes wide range of new applications in various fields of industry. This article summarizes exclusively scalable techniques and focuses on strengths, respectively, limitations with respect to the biomedical applicability and regulatory requirements concerning silver nanoparticles.

Advanced scientific computational methods and their applications to nuclear technologies. (4) Overview of scientific computational methods, introduction of continuum simulation methods and their applications (4)

International Nuclear Information System (INIS)

Sekimura, Naoto; Okita, Taira

2006-01-01

Scientific computational methods have advanced remarkably with the progress of nuclear development. They have played the role of weft connecting each realm of nuclear engineering and then an introductory course of advanced scientific computational methods and their applications to nuclear technologies were prepared in serial form. This is the fourth issue showing the overview of scientific computational methods with the introduction of continuum simulation methods and their applications. Simulation methods on physical radiation effects on materials are reviewed based on the process such as binary collision approximation, molecular dynamics, kinematic Monte Carlo method, reaction rate method and dislocation dynamics. (T. Tanaka)

Informetrics theory, methods and applications

CERN Document Server

Qiu, Junping; Yang, Siluo; Dong, Ke

2017-01-01

This book provides an accessible introduction to the history, theory and techniques of informetrics. Divided into 14 chapters, it develops the content system of informetrics from the theory, methods and applications; systematically analyzes the six basic laws and the theory basis of informetrics and presents quantitative analysis methods such as citation analysis and computer-aided analysis. It also discusses applications in information resource management, information and library science, science of science, scientific evaluation and the forecast field. Lastly, it describes a new development in informetrics- webometrics. Providing a comprehensive overview of the complex issues in today's environment, this book is a valuable resource for all researchers, students and practitioners in library and information science.

Fuzzy multiple attribute decision making methods and applications

CERN Document Server

Chen, Shu-Jen

1992-01-01

This monograph is intended for an advanced undergraduate or graduate course as well as for researchers, who want a compilation of developments in this rapidly growing field of operations research. This is a sequel to our previous works: "Multiple Objective Decision Making--Methods and Applications: A state-of-the-Art Survey" (No.164 of the Lecture Notes); "Multiple Attribute Decision Making--Methods and Applications: A State-of-the-Art Survey" (No.186 of the Lecture Notes); and "Group Decision Making under Multiple Criteria--Methods and Applications" (No.281 of the Lecture Notes). In this monograph, the literature on methods of fuzzy Multiple Attribute Decision Making (MADM) has been reviewed thoroughly and critically, and classified systematically. This study provides readers with a capsule look into the existing methods, their characteristics, and applicability to the analysis of fuzzy MADM problems. The basic concepts and algorithms from the classical MADM methods have been used in the development of the f...

The SIESTA method; developments and applicability

International Nuclear Information System (INIS)

Artacho, Emilio; Anglada, E; Dieguez, O; Gale, J D; Garcia, A; Junquera, J; Martin, R M; Ordejon, P; Pruneda, J M; Sanchez-Portal, D; Soler, J M

2008-01-01

Recent developments in and around the SIESTA method of first-principles simulation of condensed matter are described and reviewed, with emphasis on (i) the applicability of the method for large and varied systems (ii) efficient basis sets for the standards of accuracy of density-functional methods (iii) new implementations, and (iv) extensions beyond ground-state calculations

Finite element method - theory and applications

International Nuclear Information System (INIS)

Baset, S.

1992-01-01

This paper summarizes the mathematical basis of the finite element method. Attention is drawn to the natural development of the method from an engineering analysis tool into a general numerical analysis tool. A particular application to the stress analysis of rubber materials is presented. Special advantages and issues associated with the method are mentioned. (author). 4 refs., 3 figs

Extending the applicability of multigrid methods

International Nuclear Information System (INIS)

Brannick, J; Brezina, M; Falgout, R; Manteuffel, T; McCormick, S; Ruge, J; Sheehan, B; Xu, J; Zikatanov, L

2006-01-01

Multigrid methods are ideal for solving the increasingly large-scale problems that arise in numerical simulations of physical phenomena because of their potential for computational costs and memory requirements that scale linearly with the degrees of freedom. Unfortunately, they have been historically limited by their applicability to elliptic-type problems and the need for special handling in their implementation. In this paper, we present an overview of several recent theoretical and algorithmic advances made by the TOPS multigrid partners and their collaborators in extending applicability of multigrid methods. specific examples that are presented include quantum chromodynamics, radiation transport, and electromagnetics

Particle methods: An introduction with applications

Directory of Open Access Journals (Sweden)

Moral Piere Del

2014-01-01

Full Text Available Interacting particle methods are increasingly used to sample from complex high-dimensional distributions. They have found a wide range of applications in applied probability, Bayesian statistics and information engineering. Understanding rigorously these new Monte Carlo simulation tools leads to fascinating mathematics related to Feynman-Kac path integral theory and their interacting particle interpretations. In these lecture notes, we provide a pedagogical introduction to the stochastic modeling and the theoretical analysis of these particle algorithms. We also illustrate these methods through several applications including random walk confinements, particle absorption models, nonlinear filtering, stochastic optimization, combinatorial counting and directed polymer models.

The J-Matrix Method Developments and Applications

CERN Document Server

Alhaidari, Abdulaziz D; Heller, Eric J; Abdelmonem, Mohamed S

2008-01-01

This volume aims to provide the fundamental knowledge to appreciate the advantages of the J-matrix method and to encourage its use and further development. The J-matrix method is an algebraic method of quantum scattering with substantial success in atomic and nuclear physics. The accuracy and convergence property of the method compares favourably with other successful scattering calculation methods. Despite its thirty-year long history new applications are being found for the J-matrix method. This book gives a brief account of the recent developments and some selected applications of the method in atomic and nuclear physics. New findings are reported in which experimental results are compared to theoretical calculations. Modifications, improvements and extensions of the method are discussed using the language of the J-matrix. The volume starts with a Foreword by the two co-founders of the method, E.J. Heller and H.A. Yamani and it contains contributions from 24 prominent international researchers.

Reconstruction of a ring applicator using CT imaging: impact of the reconstruction method and applicator orientation

International Nuclear Information System (INIS)

Hellebust, Taran Paulsen; Tanderup, Kari; Bergstrand, Eva Stabell; Knutsen, Bjoern Helge; Roeislien, Jo; Olsen, Dag Rune

2007-01-01

The purpose of this study is to investigate whether the method of applicator reconstruction and/or the applicator orientation influence the dose calculation to points around the applicator for brachytherapy of cervical cancer with CT-based treatment planning. A phantom, containing a fixed ring applicator set and six lead pellets representing dose points, was used. The phantom was CT scanned with the ring applicator at four different angles related to the image plane. In each scan the applicator was reconstructed by three methods: (1) direct reconstruction in each image (DR) (2) reconstruction in multiplanar reconstructed images (MPR) and (3) library plans, using pre-defined applicator geometry (LIB). The doses to the lead pellets were calculated. The relative standard deviation (SD) for all reconstruction methods was less than 3.7% in the dose points. The relative SD for the LIB method was significantly lower (p < 0.05) than for the DR and MPR methods for all but two points. All applicator orientations had similar dose calculation reproducibility. Using library plans for applicator reconstruction gives the most reproducible dose calculation. However, with restrictive guidelines for applicator reconstruction the uncertainties for all methods are low compared to other factors influencing the accuracy of brachytherapy

Structural, morphological, and electrical properties of doped ceria as a solid electrolyte for intermediate-temperature solid oxide fuel cells

KAUST Repository

Stojmenović, M.

2015-03-11

The solid solutions of CeO2 with one or more rare-earth oxides among Yb2O3, Sm2O3, and Gd2O3 are synthesized by either modified glycine nitrate procedure (MGNP) or self-propagating reaction at room temperature (SPRT). The overall mole fraction of rare-earth oxide dopants was x = 0.2. The characterization was committed by XRPD, TEM, BET, and Raman Spectroscopy methods. According to XRPD and Raman spectroscopy, the obtained products presented the single-phase solid solutions with basic fluorite-type CeO2 structure, regardless on the number and the concentration of dopants. Both XRPD and TEM analysis evidenced the nanometer particle dimensions. The defect model was applied to calculate lattice parameters of single-, co-, and multi-doped solids. The sintering of the sample nanopowders was performed at 1550 °C, in air atmosphere. The sintered samples were characterized by XRPD, SEM, and complex impedance methods. The sintering did not affect the concentration ratios of the constituents. The highest conductivity at 700 °C amounting to 2.14 × 10−2 and 1.92 × 10−2 Ω−1 cm−1 was measured for the sample Ce0.8Sm0.08Gd0.12O2−δ, synthesized by SPRT and MGNP methods, respectively. The corresponding activation energies of conductivity, measured in the temperature range 500–700 °C, amounted to 0.24 and 0.23 eV.

Structural, morphological, and electrical properties of doped ceria as a solid electrolyte for intermediate-temperature solid oxide fuel cells

KAUST Repository

Stojmenović, M.; Zunic, Milan; Gulicovski, J.; Bajuk-Bogdanović, D.; Holclajtner-Antunović, I.; Dodevski, V.; Mentus, S.

2015-01-01

The solid solutions of CeO2 with one or more rare-earth oxides among Yb2O3, Sm2O3, and Gd2O3 are synthesized by either modified glycine nitrate procedure (MGNP) or self-propagating reaction at room temperature (SPRT). The overall mole fraction of rare-earth oxide dopants was x = 0.2. The characterization was committed by XRPD, TEM, BET, and Raman Spectroscopy methods. According to XRPD and Raman spectroscopy, the obtained products presented the single-phase solid solutions with basic fluorite-type CeO2 structure, regardless on the number and the concentration of dopants. Both XRPD and TEM analysis evidenced the nanometer particle dimensions. The defect model was applied to calculate lattice parameters of single-, co-, and multi-doped solids. The sintering of the sample nanopowders was performed at 1550 °C, in air atmosphere. The sintered samples were characterized by XRPD, SEM, and complex impedance methods. The sintering did not affect the concentration ratios of the constituents. The highest conductivity at 700 °C amounting to 2.14 × 10−2 and 1.92 × 10−2 Ω−1 cm−1 was measured for the sample Ce0.8Sm0.08Gd0.12O2−δ, synthesized by SPRT and MGNP methods, respectively. The corresponding activation energies of conductivity, measured in the temperature range 500–700 °C, amounted to 0.24 and 0.23 eV.

Advanced computational electromagnetic methods and applications

CERN Document Server

Li, Wenxing; Elsherbeni, Atef; Rahmat-Samii, Yahya

2015-01-01

This new resource covers the latest developments in computational electromagnetic methods, with emphasis on cutting-edge applications. This book is designed to extend existing literature to the latest development in computational electromagnetic methods, which are of interest to readers in both academic and industrial areas. The topics include advanced techniques in MoM, FEM and FDTD, spectral domain method, GPU and Phi hardware acceleration, metamaterials, frequency and time domain integral equations, and statistics methods in bio-electromagnetics.

Application of numerical analysis methods to thermoluminescence dosimetry

International Nuclear Information System (INIS)

Gomez Ros, J. M.; Delgado, A.

1989-01-01

This report presents the application of numerical methods to thermoluminescence dosimetry (TLD), showing the advantages obtained over conventional evaluation systems. Different configurations of the analysis method are presented to operate in specific dosimetric applications of TLD, such as environmental monitoring and mailed dosimetry systems for quality assurance in radiotherapy facilities. (Author) 10 refs

Dynamical Systems Method and Applications Theoretical Developments and Numerical Examples

CERN Document Server

Ramm, Alexander G

2012-01-01

Demonstrates the application of DSM to solve a broad range of operator equations The dynamical systems method (DSM) is a powerful computational method for solving operator equations. With this book as their guide, readers will master the application of DSM to solve a variety of linear and nonlinear problems as well as ill-posed and well-posed problems. The authors offer a clear, step-by-step, systematic development of DSM that enables readers to grasp the method's underlying logic and its numerous applications. Dynamical Systems Method and Applications begins with a general introduction and

[Application of Delphi method in traditional Chinese medicine clinical research].

Science.gov (United States)

Bi, Ying-fei; Mao, Jing-yuan

2012-03-01

In recent years, Delphi method has been widely applied in traditional Chinese medicine (TCM) clinical research. This article analyzed the present application situation of Delphi method in TCM clinical research, and discussed some problems presented in the choice of evaluation method, classification of observation indexes and selection of survey items. On the basis of present application of Delphi method, the author analyzed the method on questionnaire making, selection of experts, evaluation of observation indexes and selection of survey items. Furthermore, the author summarized the steps of application of Delphi method in TCM clinical research.

Combinatorial methods with computer applications

CERN Document Server

Gross, Jonathan L

2007-01-01

Combinatorial Methods with Computer Applications provides in-depth coverage of recurrences, generating functions, partitions, and permutations, along with some of the most interesting graph and network topics, design constructions, and finite geometries. Requiring only a foundation in discrete mathematics, it can serve as the textbook in a combinatorial methods course or in a combined graph theory and combinatorics course.After an introduction to combinatorics, the book explores six systematic approaches within a comprehensive framework: sequences, solving recurrences, evaluating summation exp

Multivariate methods in nuclear waste remediation: Needs and applications

International Nuclear Information System (INIS)

Pulsipher, B.A.

1992-05-01

The United States Department of Energy (DOE) has developed a strategy for nuclear waste remediation and environmental restoration at several major sites across the country. Nuclear and hazardous wastes are found in underground storage tanks, containment drums, soils, and facilities. Due to the many possible contaminants and complexities of sampling and analysis, multivariate methods are directly applicable. However, effective application of multivariate methods will require greater ability to communicate methods and results to a non-statistician community. Moreover, more flexible multivariate methods may be required to accommodate inherent sampling and analysis limitations. This paper outlines multivariate applications in the context of select DOE environmental restoration activities and identifies several perceived needs

Applications of the Monte Carlo method in radiation protection

International Nuclear Information System (INIS)

Kulkarni, R.N.; Prasad, M.A.

1999-01-01

This paper gives a brief introduction to the application of the Monte Carlo method in radiation protection. It may be noted that an exhaustive review has not been attempted. The special advantage of the Monte Carlo method has been first brought out. The fundamentals of the Monte Carlo method have next been explained in brief, with special reference to two applications in radiation protection. Some sample current applications have been reported in the end in brief as examples. They are, medical radiation physics, microdosimetry, calculations of thermoluminescence intensity and probabilistic safety analysis. The limitations of the Monte Carlo method have also been mentioned in passing. (author)

What is the method in applying formal methods to PLC applications?

NARCIS (Netherlands)

Mader, Angelika H.; Engel, S.; Wupper, Hanno; Kowalewski, S.; Zaytoon, J.

2000-01-01

The question we investigate is how to obtain PLC applications with confidence in their proper functioning. Especially, we are interested in the contribution that formal methods can provide for their development. Our maxim is that the place of a particular formal method in the total picture of system

Analysis of Formal Methods for Specification of E-Commerce Applications

Directory of Open Access Journals (Sweden)

Sadiq Ali Khan

2016-01-01

Full Text Available E-commerce based application characteristics portray elevated dynamics while incorporating decentralized nature. Extreme emphasis influencing structural design plus implementation, positions such applications highly appreciated. Significant research articles reveal that, applying formal methods addressing challenges incumbent with E-commerce based applications, contribute towards reliability and robustness obliging the system. Anticipating and designing sturdy e-process and concurrent implementation, allows application behavior extra strength against errors, frauds and hacking, minimizing program faults during application operations. Programmers find extreme difficulty guaranteeing correct processing under all circumstances, however, not impossible. Concealed flaws and errors, triggered only under unexpected and unanticipated scenarios, pilot subtle mistakes and appalling failures. Code authors utilize various formal methods for reducing these flaws. Mentioning prominent methods would include, ASM (Abstract State Machines, B-Method, z-Language, UML (Unified Modelling Language etc. This paper primarily focuses different formal methods applied while deliberating specification and verification techniques for cost effective.

Analysis of mixed data methods & applications

CERN Document Server

de Leon, Alexander R

2013-01-01

A comprehensive source on mixed data analysis, Analysis of Mixed Data: Methods & Applications summarizes the fundamental developments in the field. Case studies are used extensively throughout the book to illustrate interesting applications from economics, medicine and health, marketing, and genetics. Carefully edited for smooth readability and seamless transitions between chaptersAll chapters follow a common structure, with an introduction and a concluding summary, and include illustrative examples from real-life case studies in developmental toxicolog

Application of Electrical Resistivity Method (ERM) in Groundwater Exploration

Science.gov (United States)

Izzaty Riwayat, Akhtar; Nazri, Mohd Ariff Ahmad; Hazreek Zainal Abidin, Mohd

2018-04-01

The geophysical method which dominant by geophysicists become one of most popular method applied by engineers in civil engineering fields. Electrical Resistivity Method (ERM) is one of geophysical tool that offer very attractive technique for subsurface profile characterization in larger area. Applicable alternative technique in groundwater exploration such as ERM which complement with existing conventional method may produce comprehensive and convincing output thus effective in terms of cost, time, data coverage and sustainable. ERM has been applied by various application in groundwater exploration. Over the years, conventional method such as excavation and test boring are the tools used to obtain information of earth layer especially during site investigation. There are several problems regarding the application of conventional technique as it only provides information at actual drilling point only. This review paper was carried out to expose the application of ERM in groundwater exploration. Results from ERM could be additional information to respective expert for their problem solving such as the information on groundwater pollution, leachate, underground and source of water supply.

A New Neurocognitive Interpretation of Shoulder Position Sense during Reaching: Unexpected Competence in the Measurement of Extracorporeal Space

Directory of Open Access Journals (Sweden)

Teresa Paolucci

2016-01-01

Full Text Available Background. The position sense of the shoulder joint is important during reaching. Objective. To examine the existence of additional competence of the shoulder with regard to the ability to measure extracorporeal space, through a novel approach, using the shoulder proprioceptive rehabilitation tool (SPRT, during reaching. Design. Observational case-control study. Methods. We examined 50 subjects: 25 healthy and 25 with impingement syndrome with a mean age [years] of 64.52 +/− 6.98 and 68.36 +/− 6.54, respectively. Two parameters were evaluated using the SPRT: the integration of visual information and the proprioceptive afferents of the shoulder (Test 1 and the discriminative proprioceptive capacity of the shoulder, with the subject blindfolded (Test 2. These tasks assessed the spatial error (in centimeters by the shoulder joint in reaching movements on the sagittal plane. Results. The shoulder had proprioceptive features that allowed it to memorize a reaching position and reproduce it (error of 1.22 cm to 1.55 cm in healthy subjects. This ability was lower in the impingement group, with a statistically significant difference compared to the healthy group (p<0.05 by Mann–Whitney test. Conclusions. The shoulder has specific expertise in the measurement of the extracorporeal space during reaching movements that gradually decreases in impingement syndrome.

Studies on the methods of inorganic nutrient application in coconut

International Nuclear Information System (INIS)

Dwivedi, R.S.; Ray, P.K.; Ninan, S.

1981-01-01

Using carrier free 32 P, tagged single superphosphate and 86 Rb, the efficiency of different methods of plant injection and soil placement techniques for fertilizer applications was examined. In the plant injection techniques the radioactivity was fed to the palms through growing roots tips, cut ends of roots, stem injection and leaf axils. The application of radioactivity through the cut ends of roots was most efficient since 32 P was detected in 10 m tall palms, four hours after application. In stem, leaf axil and growing roots tips injection the 32 P was detected after 8, 12 and 18 h. Out of four methods of soil application, the quickest recovery of 32 P in the palms was detected after 7 days of placement when applied by the hole method. The 32 P activity in the palms through circular trenches, strips and basin methods was recorded after 8, 8 and 11 days of application respectively. The accumulation of 86 Rb was significantly higher than 32 P. With plant injection technique the accumulation of activity was found to be significantly higher than with soil placement methods. The rate of radioactivity absorption was 10 to 60 time faster in the former technique as compared to that of the latter. The application of radioactivity through cut ends of roots and circular trench methods, were found to be better and may recommended for nutrient application in coconut. (orig.)

Finite Element Methods and Their Applications

CERN Document Server

Chen, Zhangxin

2005-01-01

This book serves as a text for one- or two-semester courses for upper-level undergraduates and beginning graduate students and as a professional reference for people who want to solve partial differential equations (PDEs) using finite element methods. The author has attempted to introduce every concept in the simplest possible setting and maintain a level of treatment that is as rigorous as possible without being unnecessarily abstract. Quite a lot of attention is given to discontinuous finite elements, characteristic finite elements, and to the applications in fluid and solid mechanics including applications to porous media flow, and applications to semiconductor modeling. An extensive set of exercises and references in each chapter are provided.

Prony's method application for BWR instabilities characterization

Energy Technology Data Exchange (ETDEWEB)

Castillo, Rogelio, E-mail: rogelio.castillo@inin.gob.mx [Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca s/n, La Marquesa, Ocoyoacac, Estado de México 52750 (Mexico); Ramírez, J. Ramón, E-mail: ramon.ramirez@inin.gob.mx [Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca s/n, La Marquesa, Ocoyoacac, Estado de México 52750 (Mexico); Alonso, Gustavo, E-mail: gustavo.alonso@inin.gob.mx [Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca s/n, La Marquesa, Ocoyoacac, Estado de México 52750 (Mexico); Instituto Politecnico Nacional, Unidad Profesional Adolfo Lopez Mateos, Ed. 9, Lindavista, D.F. 07300 (Mexico); Ortiz-Villafuerte, Javier, E-mail: javier.ortiz@inin.gob.mx [Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca s/n, La Marquesa, Ocoyoacac, Estado de México 52750 (Mexico)

2015-04-01

Highlights: • Prony's method application for BWR instability events. • Several BWR instability benchmark are assessed using this method. • DR and frequency are obtained and a new parameter is proposed to eliminate false signals. • Adequate characterization of in-phase and out-of-phase events is obtained. • The Prony's method application is validated. - Abstract: Several methods have been developed for the analysis of reactor power signals during BWR power oscillations. Among them is the Prony's method, its application provides the DR and the frequency of oscillations. In this paper another characteristic of the method is proposed to determine the type of oscillations that can occur, in-phase or out-of-phase. Prony's method decomposes a given signal in all the frequencies that it contains, therefore the DR of the fundamental mode and the first harmonic are obtained. To determine the more dominant pole of the system a normalized amplitude W of the system is calculated, which depends on the amplitude and the damping coefficient. With this term, it can be analyzed which type of oscillations is present, if W of the fundamental mode frequency is the greater, the type of oscillations is in-phase, if W of the first harmonic frequency is the greater, the type of oscillations is out-of-phase. The method is applied to several stability benchmarks to assess its validity. Results show the applicability of the method as an alternative analysis method to determine the type of oscillations occurred.

Prony's method application for BWR instabilities characterization

International Nuclear Information System (INIS)

Castillo, Rogelio; Ramírez, J. Ramón; Alonso, Gustavo; Ortiz-Villafuerte, Javier

2015-01-01

Highlights: • Prony's method application for BWR instability events. • Several BWR instability benchmark are assessed using this method. • DR and frequency are obtained and a new parameter is proposed to eliminate false signals. • Adequate characterization of in-phase and out-of-phase events is obtained. • The Prony's method application is validated. - Abstract: Several methods have been developed for the analysis of reactor power signals during BWR power oscillations. Among them is the Prony's method, its application provides the DR and the frequency of oscillations. In this paper another characteristic of the method is proposed to determine the type of oscillations that can occur, in-phase or out-of-phase. Prony's method decomposes a given signal in all the frequencies that it contains, therefore the DR of the fundamental mode and the first harmonic are obtained. To determine the more dominant pole of the system a normalized amplitude W of the system is calculated, which depends on the amplitude and the damping coefficient. With this term, it can be analyzed which type of oscillations is present, if W of the fundamental mode frequency is the greater, the type of oscillations is in-phase, if W of the first harmonic frequency is the greater, the type of oscillations is out-of-phase. The method is applied to several stability benchmarks to assess its validity. Results show the applicability of the method as an alternative analysis method to determine the type of oscillations occurred

Distance sampling methods and applications

CERN Document Server

Buckland, S T; Marques, T A; Oedekoven, C S

2015-01-01

In this book, the authors cover the basic methods and advances within distance sampling that are most valuable to practitioners and in ecology more broadly. This is the fourth book dedicated to distance sampling. In the decade since the last book published, there have been a number of new developments. The intervening years have also shown which advances are of most use. This self-contained book covers topics from the previous publications, while also including recent developments in method, software and application. Distance sampling refers to a suite of methods, including line and point transect sampling, in which animal density or abundance is estimated from a sample of distances to detected individuals. The book illustrates these methods through case studies; data sets and computer code are supplied to readers through the book’s accompanying website.  Some of the case studies use the software Distance, while others use R code. The book is in three parts.  The first part addresses basic methods, the ...

26 CFR 1.471-10 - Applicability of long-term contract methods.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 6 2010-04-01 2010-04-01 false Applicability of long-term contract methods. 1... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Inventories § 1.471-10 Applicability of long-term contract methods. See § 1.460-2 for rules providing for the application of the long-term contract methods to...

Application of an analytical method for solution of thermal hydraulic conservation equations

Energy Technology Data Exchange (ETDEWEB)

Fakory, M.R. [Simulation, Systems & Services Technologies Company (S3 Technologies), Columbia, MD (United States)

1995-09-01

An analytical method has been developed and applied for solution of two-phase flow conservation equations. The test results for application of the model for simulation of BWR transients are presented and compared with the results obtained from application of the explicit method for integration of conservation equations. The test results show that with application of the analytical method for integration of conservation equations, the Courant limitation associated with explicit Euler method of integration was eliminated. The results obtained from application of the analytical method (with large time steps) agreed well with the results obtained from application of explicit method of integration (with time steps smaller than the size imposed by Courant limitation). The results demonstrate that application of the analytical approach significantly improves the numerical stability and computational efficiency.

Bayesian non- and semi-parametric methods and applications

CERN Document Server

Rossi, Peter

2014-01-01

This book reviews and develops Bayesian non-parametric and semi-parametric methods for applications in microeconometrics and quantitative marketing. Most econometric models used in microeconomics and marketing applications involve arbitrary distributional assumptions. As more data becomes available, a natural desire to provide methods that relax these assumptions arises. Peter Rossi advocates a Bayesian approach in which specific distributional assumptions are replaced with more flexible distributions based on mixtures of normals. The Bayesian approach can use either a large but fixed number

Effects of application methods and species of wood on color ...

African Journals Online (AJOL)

PRECIOUS

2009-11-02

Nov 2, 2009 ... methods. Key words: Waterborne varnishes, application methods, wood materials, color change. ... rate in open air conditions (Anderson et al., 1991). .... for topcoat application and they were held for drying for 3 weeks. Finally ...

Structural equation modeling methods and applications

CERN Document Server

Wang, Jichuan

2012-01-01

A reference guide for applications of SEM using Mplus Structural Equation Modeling: Applications Using Mplus is intended as both a teaching resource and a reference guide. Written in non-mathematical terms, this book focuses on the conceptual and practical aspects of Structural Equation Modeling (SEM). Basic concepts and examples of various SEM models are demonstrated along with recently developed advanced methods, such as mixture modeling and model-based power analysis and sample size estimate for SEM. The statistical modeling program, Mplus, is also featured and provides researchers with a

Development of nuclear power plant online monitoring system using statistical quality control

International Nuclear Information System (INIS)

An, Sang Ha

2006-02-01

Statistical Quality Control techniques have been applied to many aspects of industrial engineering. An application to nuclear power plant maintenance and control is also presented that can greatly improve plant safety. As a demonstration of such an approach, a specific system is analyzed: the reactor coolant pumps (RCP) and the fouling resistance of heat exchanger. This research uses Shewart X-bar, R charts, Cumulative Sum charts (CUSUM), and Sequential Probability Ratio Test (SPRT) to analyze the process for the state of statistical control. And we made Control Chart Analyzer (CCA) to support these analyses that can make a decision of error in process. The analysis shows that statistical process control methods can be applied as an early warning system capable of identifying significant equipment problems well in advance of traditional control room alarm indicators. Such a system would provide operators with enough time to respond to possible emergency situations and thus improve plant safety and reliability

Design of Nuclear Power Plant Online Monitoring System

International Nuclear Information System (INIS)

An, Sang-ha; Jeong, Yong-hoon; Chang, Soon-heung; Lee, Song-kyu

2007-01-01

Statistical Quality Control techniques have been applied to many aspects of industrial engineering. An application to nuclear power plant maintenance and control is also presented that can greatly improve plant safety. As a demonstration of such an approach, a specific system is analyzed: the reactor coolant pumps (RCPs) and the fouling resistance of heat exchanger. This research uses Shewart X-bar, R charts, Cumulative Sum charts (CUSUM), and Sequential Probability Ratio Test (SPRT) to analyze the process for the state of statistical control. And the Control Chart Analyzer (CCA) has been made to support these analyses that can make a decision of error in process. The analysis shows that statistical process control methods can be applied as an early warning system capable of identifying significant equipment problems well in advance of traditional control room alarm indicators. Such a system would provide operators with enough time to respond to possible emergency situations and thus improve plant safety and reliability

Application of blended learning in teaching statistical methods

Directory of Open Access Journals (Sweden)

Barbara Dębska

2012-12-01

Full Text Available The paper presents the application of a hybrid method (blended learning - linking traditional education with on-line education to teach selected problems of mathematical statistics. This includes the teaching of the application of mathematical statistics to evaluate laboratory experimental results. An on-line statistics course was developed to form an integral part of the module ‘methods of statistical evaluation of experimental results’. The course complies with the principles outlined in the Polish National Framework of Qualifications with respect to the scope of knowledge, skills and competencies that students should have acquired at course completion. The paper presents the structure of the course and the educational content provided through multimedia lessons made accessible on the Moodle platform. Following courses which used the traditional method of teaching and courses which used the hybrid method of teaching, students test results were compared and discussed to evaluate the effectiveness of the hybrid method of teaching when compared to the effectiveness of the traditional method of teaching.

Application of CFD methods in research of SCWR thermo-hydraulics

International Nuclear Information System (INIS)

Zeng Xiaokang; Li Yongliang; Yan Xiao; Xiao Zejun; Huang Yanping

2013-01-01

The CFD method has been an important tool in the research of SCWR thermo- hydraulics. Currently, the CFD methods uses commonly the subcritical turbulence models, which can not accurately simulate the gravity and thermal expansion acceleration effect, and CFD numerical method is not applicable when the heat flux is large. The paper summarizes the application status of the CFD methods in the research of SCWR thermo-hydraulics in RETH. (authors)

System for monitoring an industrial or biological process

Science.gov (United States)

Gross, Kenneth C.; Wegerich, Stephan W.; Vilim, Rick B.; White, Andrew M.

1998-01-01

A method and apparatus for monitoring and responding to conditions of an industrial process. Industrial process signals, such as repetitive manufacturing, testing and operational machine signals, are generated by a system. Sensor signals characteristic of the process are generated over a time length and compared to reference signals over the time length. The industrial signals are adjusted over the time length relative to the reference signals, the phase shift of the industrial signals is optimized to the reference signals and the resulting signals output for analysis by systems such as SPRT.

Prospective Mathematics Teachers' Opinions about Mathematical Modeling Method and Applicability of This Method

Science.gov (United States)

Akgün, Levent

2015-01-01

The aim of this study is to identify prospective secondary mathematics teachers' opinions about the mathematical modeling method and the applicability of this method in high schools. The case study design, which is among the qualitative research methods, was used in the study. The study was conducted with six prospective secondary mathematics…

Application of quasiexactly solvable potential method to the N-body ...

Indian Academy of Sciences (India)

physics pp. 985–996. Application of quasiexactly solvable potential method to the N-body ... Application of QES method to N-particle quantum model interacting via an ... Now, if we choose the centre of mass R as the origin of the coordinates,.

77 FR 8865 - Recent Postings of Broadly Applicable Alternative Test Methods

Science.gov (United States)

2012-02-15

... Applicable Alternative Test Methods AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of availability. SUMMARY: This notice announces the broadly applicable alternative test method approval decisions... INFORMATION CONTACT: An electronic copy of each alternative test method approval document is available on the...

Application of cybernetic methods in physics

Energy Technology Data Exchange (ETDEWEB)

Fradkov, Aleksandr L [Institute of Problems of Mechanical Engineering, Russian Academy of Sciences, St.-Petersburg (Russian Federation)

2005-02-28

Basic aspects of the subject and methodology for a new and rapidly developing area of research that has emerged at the intersection of physics and control theory (cybernetics) and emphasizes the application of cybernetic methods to the study of physical systems are reviewed. Speed-gradient and Hamiltonian solutions for energy control problems in conservative and dissipative systems are presented. Application examples such as the Kapitza pendulum, controlled overcoming of a potential barrier, and controlling coupled oscillators and molecular systems are presented. A speed-gradient approach to modeling the dynamics of physical systems is discussed. (reviews of topical problems)

Application of cybernetic methods in physics

International Nuclear Information System (INIS)

Fradkov, Aleksandr L

2005-01-01

Basic aspects of the subject and methodology for a new and rapidly developing area of research that has emerged at the intersection of physics and control theory (cybernetics) and emphasizes the application of cybernetic methods to the study of physical systems are reviewed. Speed-gradient and Hamiltonian solutions for energy control problems in conservative and dissipative systems are presented. Application examples such as the Kapitza pendulum, controlled overcoming of a potential barrier, and controlling coupled oscillators and molecular systems are presented. A speed-gradient approach to modeling the dynamics of physical systems is discussed. (reviews of topical problems)

Computational methods for industrial radiation measurement applications

International Nuclear Information System (INIS)

Gardner, R.P.; Guo, P.; Ao, Q.

1996-01-01

Computational methods have been used with considerable success to complement radiation measurements in solving a wide range of industrial problems. The almost exponential growth of computer capability and applications in the last few years leads to a open-quotes black boxclose quotes mentality for radiation measurement applications. If a black box is defined as any radiation measurement device that is capable of measuring the parameters of interest when a wide range of operating and sample conditions may occur, then the development of computational methods for industrial radiation measurement applications should now be focused on the black box approach and the deduction of properties of interest from the response with acceptable accuracy and reasonable efficiency. Nowadays, increasingly better understanding of radiation physical processes, more accurate and complete fundamental physical data, and more advanced modeling and software/hardware techniques have made it possible to make giant strides in that direction with new ideas implemented with computer software. The Center for Engineering Applications of Radioisotopes (CEAR) at North Carolina State University has been working on a variety of projects in the area of radiation analyzers and gauges for accomplishing this for quite some time, and they are discussed here with emphasis on current accomplishments

Helium leak testing methods in nuclear applications

International Nuclear Information System (INIS)

Ahmad, Anis

2004-01-01

Helium mass-spectrometer leak test is the most sensitive leak test method. It gives very reliable and sensitive test results. In last few years application of helium leak testing has gained more importance due to increased public awareness of safety and environment pollution caused by number of growing chemical and other such industries. Helium leak testing is carried out and specified in most of the critical area applications like nuclear, space, chemical and petrochemical industries

Methods for compressible multiphase flows and their applications

Science.gov (United States)

Kim, H.; Choe, Y.; Kim, H.; Min, D.; Kim, C.

2018-06-01

This paper presents an efficient and robust numerical framework to deal with multiphase real-fluid flows and their broad spectrum of engineering applications. A homogeneous mixture model incorporated with a real-fluid equation of state and a phase change model is considered to calculate complex multiphase problems. As robust and accurate numerical methods to handle multiphase shocks and phase interfaces over a wide range of flow speeds, the AUSMPW+_N and RoeM_N schemes with a system preconditioning method are presented. These methods are assessed by extensive validation problems with various types of equation of state and phase change models. Representative realistic multiphase phenomena, including the flow inside a thermal vapor compressor, pressurization in a cryogenic tank, and unsteady cavitating flow around a wedge, are then investigated as application problems. With appropriate physical modeling followed by robust and accurate numerical treatments, compressible multiphase flow physics such as phase changes, shock discontinuities, and their interactions are well captured, confirming the suitability of the proposed numerical framework to wide engineering applications.

A Modified Homogeneous Balance Method and Its Applications

International Nuclear Information System (INIS)

Liu Chunping

2011-01-01

A modified homogeneous balance method is proposed by improving some key steps in the homogeneous balance method. Bilinear equations of some nonlinear evolution equations are derived by using the modified homogeneous balance method. Generalized Boussinesq equation, KP equation, and mKdV equation are chosen as examples to illustrate our method. This approach is also applicable to a large variety of nonlinear evolution equations. (general)

Application of nuclear gamma methods in mining

International Nuclear Information System (INIS)

Simon, L.; Bosak, J.

1980-01-01

A brief review is presented of basic physical characteristics of laboratory, field and operating gamma methods, of their classifications and principles. The measuring instrumentation used and the current state of applications of nuclear gamma methods in coal and ore mining and related branches are described in detail. Principles and practical recommendations are given for safety at work when handling gamma sources. (B.S.)

Analysis of application for situational teaching method in tourism English teaching

Directory of Open Access Journals (Sweden)

Li Jing

2016-01-01

Full Text Available Faced with China’s English teaching problems today, it is not enough to just know that the situational teaching method can be effectively applied in a wide range of English teaching, but there is a must to embody the specific application value of the situational teaching method. This paper first analyzes tourism English teaching in China through establishing the quantifiable group-index hierarchical structure model to obtain the optimal training program of China’s tourism English talents, and then carries out a detailed analysis of the application and role of the situational teaching method in training of the tourism English ability to obtain the specific application scope and application value of the situational teaching method in the tourism English teaching.

Logic-based aggregation methods for ranking student applicants

Directory of Open Access Journals (Sweden)

Milošević Pavle

2017-01-01

Full Text Available In this paper, we present logic-based aggregation models used for ranking student applicants and we compare them with a number of existing aggregation methods, each more complex than the previous one. The proposed models aim to include depen- dencies in the data using Logical aggregation (LA. LA is a aggregation method based on interpolative Boolean algebra (IBA, a consistent multi-valued realization of Boolean algebra. This technique is used for a Boolean consistent aggregation of attributes that are logically dependent. The comparison is performed in the case of student applicants for master programs at the University of Belgrade. We have shown that LA has some advantages over other presented aggregation methods. The software realization of all applied aggregation methods is also provided. This paper may be of interest not only for student ranking, but also for similar problems of ranking people e.g. employees, team members, etc.

Harmony Search Method: Theory and Applications

Directory of Open Access Journals (Sweden)

X. Z. Gao

2015-01-01

Full Text Available The Harmony Search (HS method is an emerging metaheuristic optimization algorithm, which has been employed to cope with numerous challenging tasks during the past decade. In this paper, the essential theory and applications of the HS algorithm are first described and reviewed. Several typical variants of the original HS are next briefly explained. As an example of case study, a modified HS method inspired by the idea of Pareto-dominance-based ranking is also presented. It is further applied to handle a practical wind generator optimal design problem.

Keller-box method and its application

CERN Document Server

Prasad, Kerehalli V

2014-01-01

Most of the problems arising in science and engineering are nonlinear. They are inherently difficult to solve. Traditional analytical approximations are valid only for weakly nonlinear problems, and often break down for problems with strong nonlinearity. This book presents the current theoretical developments and applications of Keller-Box method to nonlinear problems. The first half of the bookaddresses basic concepts to understand the theoretical framework for the method. In the second half of the book, the authorsgive a number of examples of coupled nonlinear problems that have been solved

The thin layer activation method and its applications in industry

International Nuclear Information System (INIS)

1997-01-01

The thin layer activation (TLA) method is one of the most effective and precise methods for the measurement and monitoring of corrosion (erosion) and wear in industry and is used for on-line remote measurement of wear and corrosion rate of central parts in machines or processing vessels under real operating conditions. This document is a comprehensive manual on TLA method in its applications for monitoring wear and corrosion in industry. It describes the theory and presents case studies on TLA method applications in industry. In addition, in annexes are given tables of nuclear data relating to TLA (decay characteristics, depth distribution of reaction products, activation data for charged-particle nuclear reactions), references from INIS database on TLA and a detailed production of the application of TLA for wear measurement of superhard turning tools

The thin layer activation method and its applications in industry

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-01-01

The thin layer activation (TLA) method is one of the most effective and precise methods for the measurement and monitoring of corrosion (erosion) and wear in industry and is used for on-line remote measurement of wear and corrosion rate of central parts in machines or processing vessels under real operating conditions. This document is a comprehensive manual on TLA method in its applications for monitoring wear and corrosion in industry. It describes the theory and presents case studies on TLA method applications in industry. In addition, in annexes are given tables of nuclear data relating to TLA (decay characteristics, depth distribution of reaction products, activation data for charged-particle nuclear reactions), references from INIS database on TLA and a detailed production of the application of TLA for wear measurement of superhard turning tools.

Acoustic methods for cavitation mapping in biomedical applications

Science.gov (United States)

Wan, M.; Xu, S.; Ding, T.; Hu, H.; Liu, R.; Bai, C.; Lu, S.

2015-12-01

In recent years, cavitation is increasingly utilized in a wide range of applications in biomedical field. Monitoring the spatial-temporal evolution of cavitation bubbles is of great significance for efficiency and safety in biomedical applications. In this paper, several acoustic methods for cavitation mapping proposed or modified on the basis of existing work will be presented. The proposed novel ultrasound line-by-line/plane-by-plane method can depict cavitation bubbles distribution with high spatial and temporal resolution and may be developed as a potential standard 2D/3D cavitation field mapping method. The modified ultrafast active cavitation mapping based upon plane wave transmission and reception as well as bubble wavelet and pulse inversion technique can apparently enhance the cavitation to tissue ratio in tissue and further assist in monitoring the cavitation mediated therapy with good spatial and temporal resolution. The methods presented in this paper will be a foundation to promote the research and development of cavitation imaging in non-transparent medium.

Application Profile Matching Method for Employees Online Recruitment

Science.gov (United States)

Sunarti; Rangga, Rahmadian Y.; Marlim, Yulvia Nora

2017-12-01

Employees is one of the determinant factors of company’s success. Thus, reliable human resources are needed to support the survival of the company. This research takes case study at PT. Asuransi Bina Dana Arta, Tbk Pekanbaru Branch. Employee recruitment system at PT. Asuransi Bina Dana Arta, Tbk Pekanbaru Branch still uses manual system as seen in application letter files file so it needs long time to determine accepted and rejected the application. For that it needs to built a system or application that allows companies in determining employees who accepted or rejected easily. Pofile Matching Method is a process of competency assessment that is done by comparing the value of written, psychological and interview test between one applicationt with other. PT. Asuransi Bina Dana Arta, Tbk Pekanbaru branch set the percentage to calculate NCF (Core Factor Value) by 60% and NSF (Secondary Factor Value) by 40%, and set the percentage to calculate the total value of written test by 40%, the total value of psycho test by 30%, and the total value of interview 30%. The final result of this study is to determine the rank or ranking of each applicant based on the greater value which, the greater that score of final result of an application get, the greater the chance of the applicant occupy a position or vacancy. Online Recruitment application uses profile matching method can help employee selection process and employee acceptance decisions quickly. This system can be viewed by directors or owners anywhere because it is online and used for other company branch

A new dynamic HRA method and its application

International Nuclear Information System (INIS)

Je, Moo Sung; Park, Chang Kyoo

1995-01-01

This paper presents a new dynamic HRA (Human Reliability Analysis) method and its application for quantifying the human error probabilities in implementing an accident management action. For comparisons of current HRA methods with the new method, the characteristics of THERP, HCR, and SLIM-MAUD, which are most frequently used methods in PSAs, are discussed. The action associated with the implementation of the cavity flooding during a station blackout sequence is considered for its application. This method is based on the concepts of the quantified correlation between the performance requirement and performance achievement. The MAAP 3.0B code and Latin Hypercube sampling technique are used to determine the uncertainty of the performance achievement parameter. Meanwhile, the value of the performance requirement parameter is obtained from interviews. Based on these stochastic distributions obtained, human error probabilities are calculated with respect to the various means and variances of the timings. It is shown that this method is very flexible in that it can be applied to any kind of the operator actions, including the actions associated with the implementation of accident management strategies. 1 fig., 3 tabs., 17 refs. (Author)

Photogrammetric methods of measurement in industrial applications

International Nuclear Information System (INIS)

Godding, R.; Groene, A.; Heinrich, G.; Schneider, C.T.

1993-01-01

Methods for 3D measurement are required for very varied applications in the industrial field. This includes tasks of quality assurance and plant monitoring, among others. It should be possible to apply the process flexibly it should require as short interruptions of production as possible and should meet the required accuracies. These requirements can be met by photogrammetric methods of measurement. The article introduces these methods and shows their capabilities from various selected examples (eg: the replacement of large components in a pressurized water reactor, and aircraft measurements (orig./DG) [de

Application of geo-information science methods in ecotourism exploitation

Science.gov (United States)

Dong, Suocheng; Hou, Xiaoli

2004-11-01

Application of geo-information science methods in ecotourism development was discussed in the article. Since 1990s, geo-information science methods, which take the 3S (Geographic Information System, Global Positioning System, and Remote Sensing) as core techniques, has played an important role in resources reconnaissance, data management, environment monitoring, and regional planning. Geo-information science methods can easily analyze and convert geographic spatial data. The application of 3S methods is helpful to sustainable development in tourism. Various assignments are involved in the development of ecotourism, such as reconnaissance of ecotourism resources, drawing of tourism maps, dealing with mass data, and also tourism information inquire, employee management, quality management of products. The utilization of geo-information methods in ecotourism can make the development more efficient by promoting the sustainable development of tourism and the protection of eco-environment.

Biometrics Theory, Methods, and Applications

CERN Document Server

Boulgouris, N V; Micheli-Tzanakou, Evangelia

2009-01-01

An in-depth examination of the cutting edge of biometrics. This book fills a gap in the literature by detailing the recent advances and emerging theories, methods, and applications of biometric systems in a variety of infrastructures. Edited by a panel of experts, it provides comprehensive coverage of:. Multilinear discriminant analysis for biometric signal recognition;. Biometric identity authentication techniques based on neural networks;. Multimodal biometrics and design of classifiers for biometric fusion;. Feature selection and facial aging modeling for face recognition;. Geometrical and

GNSS remote sensing theory, methods and applications

CERN Document Server

Jin, Shuanggen; Xie, Feiqin

2014-01-01

This book presents the theory and methods of GNSS remote sensing as well as its applications in the atmosphere, oceans, land and hydrology. It contains detailed theory and study cases to help the reader put the material into practice.

Minimal Residual Disease Assessment in Lymphoma: Methods and Applications.

Science.gov (United States)

Herrera, Alex F; Armand, Philippe

2017-12-01

Standard methods for disease response assessment in patients with lymphoma, including positron emission tomography and computed tomography scans, are imperfect. In other hematologic malignancies, particularly leukemias, the ability to detect minimal residual disease (MRD) is increasingly influencing treatment paradigms. However, in many subtypes of lymphoma, the application of MRD assessment techniques, like flow cytometry or polymerase chain reaction-based methods, has been challenging because of the absence of readily detected circulating disease or canonic chromosomal translocations. Newer MRD detection methods that use next-generation sequencing have yielded promising results in a number of lymphoma subtypes, fueling the hope that MRD detection may soon be applicable in clinical practice for most patients with lymphoma. MRD assessment can provide real-time information about tumor burden and response to therapy, noninvasive genomic profiling, and monitoring of clonal dynamics, allowing for many possible applications that could significantly affect the care of patients with lymphoma. Further validation of MRD assessment methods, including the incorporation of MRD assessment into clinical trials in patients with lymphoma, will be critical to determine how best to deploy MRD testing in routine practice and whether MRD assessment can ultimately bring us closer to the goal of personalized lymphoma care. In this review article, we describe the methods available for detecting MRD in patients with lymphoma and their relative advantages and disadvantages. We discuss preliminary results supporting the potential applications for MRD testing in the care of patients with lymphoma and strategies for including MRD assessment in lymphoma clinical trials.

A new ore reserve estimation method, Yang Chizhong filtering and inferential measurement method, and its application

International Nuclear Information System (INIS)

Wu Jingqin.

1989-01-01

Yang Chizhong filtering and inferential measurement method is a new method used for variable statistics of ore deposits. In order to apply this theory to estimate the uranium ore reserves under the circumstances of regular or irregular prospecting grids, small ore bodies, less sampling points, and complex occurrence, the author has used this method to estimate the ore reserves in five ore bodies of two deposits and achieved satisfactory results. It is demonstrated that compared with the traditional block measurement method, this method is simple and clear in formula, convenient in application, rapid in calculation, accurate in results, less expensive, and high economic benefits. The procedure and experience in the application of this method and the preliminary evaluation of its results are mainly described

An Application-Level QoS Control Method Based on Local Bandwidth Scheduling

Directory of Open Access Journals (Sweden)

Yong Wang

2018-01-01

Full Text Available Quality of service (QoS is an important performance indicator for Web applications and bandwidth is a key factor affecting QoS. Current methods use network protocols or ports to schedule bandwidth, which require tedious manual configurations or modifications of the underlying network. Some applications use dynamic ports and the traditional port-based bandwidth control methods cannot deal with them. A new QoS control method based on local bandwidth scheduling is proposed, which can schedule bandwidth at application level in a user-transparent way and it does not require tedious manual configurations. Experimental results indicate that the new method can effectively improve the QoS for applications, and it can be easily integrated into current Web applications without the need to modify the underlying network.

Preconditioning of iterative methods - theory and applications

Czech Academy of Sciences Publication Activity Database

Axelsson, Owe; Blaheta, Radim; Neytcheva, M.; Pultarová, I.

2015-01-01

Roč. 22, č. 6 (2015), s. 901-902 ISSN 1070-5325 Institutional support: RVO:68145535 Keywords : preconditioning * iterative methods * applications Subject RIV: BA - General Mathematics Impact factor: 1.431, year: 2015 http://onlinelibrary.wiley.com/doi/10.1002/nla.2016/epdf

Multi-level decision making models, methods and applications

CERN Document Server

Zhang, Guangquan; Gao, Ya

2015-01-01

This monograph presents new developments in multi-level decision-making theory, technique and method in both modeling and solution issues. It especially presents how a decision support system can support managers in reaching a solution to a multi-level decision problem in practice. This monograph combines decision theories, methods, algorithms and applications effectively. It discusses in detail the models and solution algorithms of each issue of bi-level and tri-level decision-making, such as multi-leaders, multi-followers, multi-objectives, rule-set-based, and fuzzy parameters. Potential readers include organizational managers and practicing professionals, who can use the methods and software provided to solve their real decision problems; PhD students and researchers in the areas of bi-level and multi-level decision-making and decision support systems; students at an advanced undergraduate, master’s level in information systems, business administration, or the application of computer science.  

Application of nonlinear systems in nanomechanics and nanofluids analytical methods and applications

CERN Document Server

Ganji, Davood Domairry

2015-01-01

With Application of Nonlinear Systems in Nanomechanics and Nanofluids the reader gains a deep and practice-oriented understanding of nonlinear systems within areas of nanotechnology application as well as the necessary knowledge enabling the handling of such systems. The book helps readers understand relevant methods and techniques for solving nonlinear problems, and is an invaluable reference for researchers, professionals and PhD students interested in research areas and industries where nanofluidics and dynamic nano-mechanical systems are studied or applied. The book is useful in areas suc

Nanometric solid solutions of the fluorite and perovskite type crystal structures: Synthesis and properties

Directory of Open Access Journals (Sweden)

Snežana Bošković

2012-09-01

Full Text Available In this paper a short review of our results on the synthesis of nanosized CeO2, CaMnO3 and BaCeO3 solid solutions are presented. The nanopowders were prepared by two innovative methods: self propagating room temperature synthesis (SPRT and modified glycine/nitrate procedure (MGNP. Different types of solid solutions with rare earth dopants in concentrations ranging from 0–0.25 mol% were synthesized. The reactions forming solid solutions were studied. In addition, the characteristics of prepared nanopowders, phenomena during sintering and the properties of sintered samples are discussed.

Application of Multi-Analyte Methods for Pesticide Formulations

Energy Technology Data Exchange (ETDEWEB)

Lantos, J.; Virtics, I. [Plant Protection & Soil Conservation Service of Szabolcs-Szatmár-Bereg County, Nyíregyháza (Hungary)

2009-07-15

The application of multi-analyte methods for pesticide formulations by GC analysis is discussed. HPLC was used to determine active ingredients. HPLC elution sequences were related to individual n-octanol/water partition coefficients. Real laboratory data are presented and evaluated with regard to validation requirements. The retention time data of pesticides on different HPLC columns under gradient and isocratic conditions are compared to illustrate the applicability of the methodologies. (author)

Nanosilicon properties, synthesis, applications, methods of analysis and control

CERN Document Server

Ischenko, Anatoly A; Aslalnov, Leonid A

2015-01-01

Nanosilicon: Properties, Synthesis, Applications, Methods of Analysis and Control examines the latest developments on the physics and chemistry of nanosilicon. The book focuses on methods for producing nanosilicon, its electronic and optical properties, research methods to characterize its spectral and structural properties, and its possible applications. The first part of the book covers the basic properties of semiconductors, including causes of the size dependence of the properties, structural and electronic properties, and physical characteristics of the various forms of silicon. It presents theoretical and experimental research results as well as examples of porous silicon and quantum dots. The second part discusses the synthesis of nanosilicon, modification of the surface of nanoparticles, and properties of the resulting particles. The authors give special attention to the photoluminescence of silicon nanoparticles. The third part describes methods used for studying and controlling the structure and pro...

New methods and applications in emission spectroscopy (1960); Methodes et applications nouvelles en spectroscopie d'emission (1960)

Energy Technology Data Exchange (ETDEWEB)

Baudin, G [Commissariat a l' Energie Atomique, Grenoble (France).Centre d' Etudes Nucleaires

1960-07-01

Emission spectroscopy, are already well-established instrumental analytical technique, has in recent years known important developments. Two mains factors are responsible; firstly the demands of metallurgy for purer and purer materials or alloys which are increasingly complex and difficult to analyse by chemical means; secondly, progress in optics, especially in the production of gratings, and in electronics in the field of photomultiplier tubes. We will not here catalogue all the new applications and methods, but we will consider a few amongst the most representative outside the conventional field. (author) [French] La spectroscopie d'emission, technique analytique instrumentale deja ancienne, a pris, depuis quelques annees, une extension notable. Deux facteurs principaux ont contribue a ce succes: d'une part, l'exigence de la metallurgie en materiaux de plus en plus pur ou en alliages de plus en plus complexes, difficiles a analyser chimiquement, d'autre part, les progres realises en optique, principalement dans la fabrication des reseaux, et en electronique dans le domaine des tubes photomultiplicateurs. Nous ne ferons pas ici le recensement de toutes les applications ou methodes nouvelles, mais nous en choisirons quelques unes des plus representatives hors du domaine classique. (auteur)

The Presentation of Self in Letters of Application: A Mixed-Method Approach

Science.gov (United States)

Soroko, Emilia

2012-01-01

The application letter, as the first phase of employment-seeking, is an opportunity for a job applicant to make a favorable impression on a potential employer. In the current study, the author used a mixed-method approach to empirically explore strategies for self-presentation in job application letters and determine the methods used in the…

The application of statistical methods to assess economic assets

Directory of Open Access Journals (Sweden)

D. V. Dianov

2017-01-01

Full Text Available The article is devoted to consideration and evaluation of machinery, equipment and special equipment, methodological aspects of the use of standards for assessment of buildings and structures in current prices, the valuation of residential, specialized houses, office premises, assessment and reassessment of existing and inactive military assets, the application of statistical methods to obtain the relevant cost estimates.The objective of the scientific article is to consider possible application of statistical tools in the valuation of the assets, composing the core group of elements of national wealth – the fixed assets. Firstly, capital tangible assets constitute the basis of material base of a new value creation, products and non-financial services. The gain, accumulated of tangible assets of a capital nature is a part of the gross domestic product, and from its volume and specific weight in the composition of GDP we can judge the scope of reproductive processes in the country.Based on the methodological materials of the state statistics bodies of the Russian Federation, regulations of the theory of statistics, which describe the methods of statistical analysis such as the index, average values, regression, the methodical approach is structured in the application of statistical tools to obtain value estimates of property, plant and equipment with significant accumulated depreciation. Until now, the use of statistical methodology in the practice of economic assessment of assets is only fragmentary. This applies to both Federal Legislation (Federal law № 135 «On valuation activities in the Russian Federation» dated 16.07.1998 in edition 05.07.2016 and the methodological documents and regulations of the estimated activities, in particular, the valuation activities’ standards. A particular problem is the use of a digital database of Rosstat (Federal State Statistics Service, as to the specific fixed assets the comparison should be carried

Application of reliability methods in Ontario Hydro

International Nuclear Information System (INIS)

Jeppesen, R.; Ravishankar, T.J.

1985-01-01

Ontario Hydro have established a reliability program in support of its substantial nuclear program. Application of the reliability program to achieve both production and safety goals is described. The value of such a reliability program is evident in the record of Ontario Hydro's operating nuclear stations. The factors which have contributed to the success of the reliability program are identified as line management's commitment to reliability; selective and judicious application of reliability methods; establishing performance goals and monitoring the in-service performance; and collection, distribution, review and utilization of performance information to facilitate cost-effective achievement of goals and improvements. (orig.)

Development and application of advanced methods for electronic structure calculations

DEFF Research Database (Denmark)

Schmidt, Per Simmendefeldt

. For this reason, part of this thesis relates to developing and applying a new method for constructing so-called norm-conserving PAW setups, that are applicable to GW calculations by using a genetic algorithm. The effect of applying the new setups significantly affects the absolute band positions, both for bulk......This thesis relates to improvements and applications of beyond-DFT methods for electronic structure calculations that are applied in computational material science. The improvements are of both technical and principal character. The well-known GW approximation is optimized for accurate calculations...... of electronic excitations in two-dimensional materials by exploiting exact limits of the screened Coulomb potential. This approach reduces the computational time by an order of magnitude, enabling large scale applications. The GW method is further improved by including so-called vertex corrections. This turns...

Computerized Classification Testing with the Rasch Model

Science.gov (United States)

Eggen, Theo J. H. M.

2011-01-01

If classification in a limited number of categories is the purpose of testing, computerized adaptive tests (CATs) with algorithms based on sequential statistical testing perform better than estimation-based CATs (e.g., Eggen & Straetmans, 2000). In these computerized classification tests (CCTs), the Sequential Probability Ratio Test (SPRT) (Wald,…

EPR of free radicals in solids II trends in methods and applications

CERN Document Server

Lund, Anders; Lund, Anders

2012-01-01

EPR of Free Radicals in Solids: Trends in Methods and Applications, 2nd ed. presents a critical two volume review of the methods and applications of EPR (ESR) for the study of free radical processes in solids. Emphasis is on the progress made in the developments in EPR technology, in the application of sophisticated matrix isolation techniques and in the advancement in quantitative EPR that have occurred since the 1st edition was published. Improvements have been made also at theoretical level, with the development of methods based on first principles and their application to the calculation of magnetic properties as well as in spectral simulations. EPR of Free Radicals in Solids II focuses on the trends in applications of experimental and theoretical methods to extract structural and dynamical properties of radicals and spin probes in solid matrices by continuous wave (CW) and pulsed techniques in nine chapters written by experts in the field. It examines the studies involving radiation- and photo-induced in...

Mobile/android application for QRS detection using zero cross method

Science.gov (United States)

Rizqyawan, M. I.; Simbolon, A. I.; Suhendra, M. A.; Amri, M. F.; Kusumandari, D. E.

2018-03-01

In automatic ECG signal processing, one of the main topics of research is QRS complex detection. Detecting correct QRS complex or R peak is important since it is used to measure several other ECG metrics. One of the robust methods for QRS detection is Zero Cross method. This method uses an addition of high-frequency signal and zero crossing count to detect QRS complex which has a low-frequency oscillation. This paper presents an application of QRS detection using Zero Cross algorithm in the Android-based system. The performance of the algorithm in the mobile environment is measured. The result shows that this method is suitable for real-time QRS detection in a mobile application.

Overview of INAA method and its application in Malaysia

International Nuclear Information System (INIS)

Yavar, A.R.; Sarmani, S.B.; Khalafi, H.; Abdul Khalik Wood; Khoo, K.S.

2011-01-01

Present work shows the development of nuclear technology in Malaysia and highlights its applications that have been developed by using the instrumental neutron activation analysis (INAA) method. In addition, present study exhibits a comprehensive review of INAA for calculation of neutron flux parameters and concentration of elements. The INAA is a powerful method to analyse the sample which identifies qualitative and quantitative of elements present in a sample. The INAA is a working instrument with advantages of experimental simplicity, high accuracy, excellent flexibility with respect to irradiation and counting conditions, and suitability for computerization. In INAA, sample is irradiated and measured directly. In practical, INAA is based on an absolute, relative and single-comparator standardisation method.The INAA has been developed since 1982 when the TRIGA Mark II reactor of Malaysia has commissioned. The absolute method was less utilised, the relative method has been used since 1982, and the k 0 -INAA method is derived from single-comparator standardization method has been developed since 1996 in Malaysian. The relative method, because of its advantages, such as high accuracy, easy for using, has the most application in Malaysia. Currently, local Universities and Malaysian Nuclear Agency (MNA) research reactor use INAA method in Malaysia. (Author)

Overview of INAA Method and Its Application in Malaysia

International Nuclear Information System (INIS)

Yavar, A.R.; Sarmani, S.B.; Khalafi, H.; Wood, A.K.; Khoo, K.S.

2015-01-01

Present work shows the development of nuclear technology in Malaysia and highlights its applications that have been developed by using the instrumental neutron activation analysis (INAA) method. In addition, present study exhibits a comprehensive review of INAA for calculation of neutron flux parameters and concentration of elements. The INAA is a powerful method to analyse the sample which identifies qualitative and quantitative of elements present in a sample. The INAA is a working instrument with advantages of experimental simplicity, high accuracy, excellent flexibility with respect to irradiation and counting conditions, and suitability for computerization. In INAA, sample is irradiated and measured directly. In practical, INAA is based on an absolute, relative and single-comparator standardisation method. The INAA has been developed since 1982 when the TRIGA MARK II reactor of Malaysia has commissioned. The absolute method was less utilised, the relative method has been used since 1982, and the k_0-INAA method is derived from single-comparator standardization method has been developed since 1996 in Malaysia. The relative method, because of its advantages, such as high accuracy, easy for using, has the most application in Malaysia. Currently, local Universities and Malaysian Nuclear Agency (MNA) research reactor use INAA method in Malaysia. (author)

Big data analytics methods and applications

CERN Document Server

Rao, BLS; Rao, SB

2016-01-01

This book has a collection of articles written by Big Data experts to describe some of the cutting-edge methods and applications from their respective areas of interest, and provides the reader with a detailed overview of the field of Big Data Analytics as it is practiced today. The chapters cover technical aspects of key areas that generate and use Big Data such as management and finance; medicine and healthcare; genome, cytome and microbiome; graphs and networks; Internet of Things; Big Data standards; bench-marking of systems; and others. In addition to different applications, key algorithmic approaches such as graph partitioning, clustering and finite mixture modelling of high-dimensional data are also covered. The varied collection of themes in this volume introduces the reader to the richness of the emerging field of Big Data Analytics.

Anomaly-based intrusion detection for SCADA systems

International Nuclear Information System (INIS)

Yang, D.; Usynin, A.; Hines, J. W.

2006-01-01

Most critical infrastructure such as chemical processing plants, electrical generation and distribution networks, and gas distribution is monitored and controlled by Supervisory Control and Data Acquisition Systems (SCADA. These systems have been the focus of increased security and there are concerns that they could be the target of international terrorists. With the constantly growing number of internet related computer attacks, there is evidence that our critical infrastructure may also be vulnerable. Researchers estimate that malicious online actions may cause $75 billion at 2007. One of the interesting countermeasures for enhancing information system security is called intrusion detection. This paper will briefly discuss the history of research in intrusion detection techniques and introduce the two basic detection approaches: signature detection and anomaly detection. Finally, it presents the application of techniques developed for monitoring critical process systems, such as nuclear power plants, to anomaly intrusion detection. The method uses an auto-associative kernel regression (AAKR) model coupled with the statistical probability ratio test (SPRT) and applied to a simulated SCADA system. The results show that these methods can be generally used to detect a variety of common attacks. (authors)

Research and application of soil-mercury-surveys method for locating uranium

International Nuclear Information System (INIS)

You Yunfei; Lu Shili; Jiao Zongrun

1995-06-01

Soil-Hg-Surveys method for locating uranium ore was presented. Soil-sampler of drilling bottom, the ability of surveying the deep uranium orebodies was raised by using this method. Application of minicomputer technology to pyrolytic-Hg-analysis raises the degree of automation and precision of the analysis. Application condition of optimum is Hg content of orebodies >1 x 10 -6 . Locating deep is about 100 m. The forecast of uranium orebodies achieved success in two unknown section that are 534 and 510 mining area, therefore two little size deposits expanded into middle size deposits. This method is as well applicable to locating gold, silver, copper, lead zinc and oil-gas natural resource and so on. (8 figs., 3 tabs.)

Applications and Preparation Methods of Copper Chromite Catalysts: A Review

Directory of Open Access Journals (Sweden)

Ram Prasad

2011-11-01

Full Text Available In this review article various applications and preparation methods of copper chromite catalysts have been discussed. While discussing it is concluded that copper chromite is a versatile catalyst which not only catalyses numerous processes of commercial importance and national program related to defence and space research but also finds applications in the most concerned problem worldwide i.e. environmental pollution control. Several other very useful applications of copper chromite catalysts are in production of clean energy, drugs and agro chemicals, etc. Various preparation methods about 15 have been discussed which depicts clear idea about the dependence of catalytic activity and selectivity on way of preparation of catalyst. In view of the globally increasing interest towards copper chromite catalysis, reexamination on the important applications of such catalysts and their useful preparation methods is thus the need of the time. This review paper encloses 369 references including a well-conceivable tabulation of the newer state of the art. Copyright © 2011 by BCREC UNDIP. All rights reserved.(Received: 19th March 2011, Revised: 03rd May 2011, Accepted: 23rd May 2011[How to Cite: R. Prasad, and P. Singh. (2011. Applications and Preparation Methods of Copper Chromite Catalysts: A Review. Bulletin of Chemical Reaction Engineering & Catalysis, 6 (2: 63-113. doi:10.9767/bcrec.6.2.829.63-113][How to Link / DOI: http://dx.doi.org/10.9767/bcrec.6.2.829.63-113 || or local:  http://ejournal.undip.ac.id/index.php/bcrec/article/view/829 ] | View in 

Recent astrophysical applications of the Trojan Horse Method to nuclear astrophysics

International Nuclear Information System (INIS)

Spitaleri, C.; Cherubini, S.; Crucilla, V.; Gulino, M.; La Cognata, M.; Lamia, L.; Pizzone, R. G.; Puglia, S. M. R.; Rapisarda, G. G.; Romano, S.; Sergi, M. L.; Tumino, A.; Fu, C.; Tribble, R.; Banu, A.; Al-Abdullah, T.; Goldberg, V.; Mukhamedzhanov, A.; Tabacaru, G.; Trache, L.

2008-01-01

The Trojan Horse Method (THM) is an unique indirect technique allowing to measure astrophysical rearrangement reactions down to astrophysical relevant energies. The basic principle and a review of the recent applications of the Trojan Horse Method are presented. The applications aiming to the extraction of the bare astrophysical S b (E) for some two-body processes are discussed

Application of Exp-function method for (2 + 1)-dimensional nonlinear evolution equations

International Nuclear Information System (INIS)

Bekir, Ahmet; Boz, Ahmet

2009-01-01

In this paper, the Exp-function method is used to construct solitary and soliton solutions of (2 + 1)-dimensional nonlinear evolution equations. (2 + 1)-dimensional breaking soliton (Calogero) equation, modified Zakharov-Kuznetsov and Konopelchenko-Dubrovsky equations are chosen to illustrate the effectiveness of the method. The method is straightforward and concise, and its applications are promising. The Exp-function method presents a wider applicability for handling nonlinear wave equations.

Engineering applications of heuristic multilevel optimization methods

Science.gov (United States)

Barthelemy, Jean-Francois M.

1989-01-01

Some engineering applications of heuristic multilevel optimization methods are presented and the discussion focuses on the dependency matrix that indicates the relationship between problem functions and variables. Coordination of the subproblem optimizations is shown to be typically achieved through the use of exact or approximate sensitivity analysis. Areas for further development are identified.

Clustering Methods Application for Customer Segmentation to Manage Advertisement Campaign

Directory of Open Access Journals (Sweden)

Maciej Kutera

2010-10-01

Full Text Available Clustering methods are recently so advanced elaborated algorithms for large collection data analysis that they have been already included today to data mining methods. Clustering methods are nowadays larger and larger group of methods, very quickly evolving and having more and more various applications. In the article, our research concerning usefulness of clustering methods in customer segmentation to manage advertisement campaign is presented. We introduce results obtained by using four selected methods which have been chosen because their peculiarities suggested their applicability to our purposes. One of the analyzed method k-means clustering with random selected initial cluster seeds gave very good results in customer segmentation to manage advertisement campaign and these results were presented in details in the article. In contrast one of the methods (hierarchical average linkage was found useless in customer segmentation. Further investigations concerning benefits of clustering methods in customer segmentation to manage advertisement campaign is worth continuing, particularly that finding solutions in this field can give measurable profits for marketing activity.

Determinants of investment behaviour. Methods and applications of meta-analysis

International Nuclear Information System (INIS)

Koetse, M.J.

2006-01-01

Meta-analysis is gradually gaining ground in economics as a research method to objectively and quantitatively summarise a body of existing empirical evidence. This dissertation studies the performance of well-known meta-analytic models and presents two meta-analysis applications. Despite its many attractive features, meta-analysis faces several methodical difficulties, especially when applied in economic research. We investigate two specific methodical problems that any meta-analysis in economics will have to deal with, viz., systematic effect-size variation due to primary-study misspecifications, and random effect-size heterogeneity. Using Monte-Carlo analysis we investigate the effects of these methodical problems on the results of a meta-analysis, and study the small-sample properties of several well-known and often applied meta-estimators. The focus of the meta-analysis applications is on two topics that are relevant for understanding investment behaviour, viz., the impact of uncertainty on investment spending, and the potential for substitution of capital for energy in production processes. In the first application we aim to shed light on the direction of the relationship between investment and uncertainty, and to uncover which factors are empirically relevant for explaining the wide variety in study outcomes. In the second application our goal is to analyse the direction and magnitude of capital-energy substitution potential, and to analyse the empirical relevance of suggested sources of variation in elasticity estimates

Determinants of investment behaviour. Methods and applications of meta-analysis

Energy Technology Data Exchange (ETDEWEB)

Koetse, M.J.

2006-03-14

Meta-analysis is gradually gaining ground in economics as a research method to objectively and quantitatively summarise a body of existing empirical evidence. This dissertation studies the performance of well-known meta-analytic models and presents two meta-analysis applications. Despite its many attractive features, meta-analysis faces several methodical difficulties, especially when applied in economic research. We investigate two specific methodical problems that any meta-analysis in economics will have to deal with, viz., systematic effect-size variation due to primary-study misspecifications, and random effect-size heterogeneity. Using Monte-Carlo analysis we investigate the effects of these methodical problems on the results of a meta-analysis, and study the small-sample properties of several well-known and often applied meta-estimators. The focus of the meta-analysis applications is on two topics that are relevant for understanding investment behaviour, viz., the impact of uncertainty on investment spending, and the potential for substitution of capital for energy in production processes. In the first application we aim to shed light on the direction of the relationship between investment and uncertainty, and to uncover which factors are empirically relevant for explaining the wide variety in study outcomes. In the second application our goal is to analyse the direction and magnitude of capital-energy substitution potential, and to analyse the empirical relevance of suggested sources of variation in elasticity estimates.

Spectral/ hp element methods: Recent developments, applications, and perspectives

Science.gov (United States)

Xu, Hui; Cantwell, Chris D.; Monteserin, Carlos; Eskilsson, Claes; Engsig-Karup, Allan P.; Sherwin, Spencer J.

2018-02-01

The spectral/ hp element method combines the geometric flexibility of the classical h-type finite element technique with the desirable numerical properties of spectral methods, employing high-degree piecewise polynomial basis functions on coarse finite element-type meshes. The spatial approximation is based upon orthogonal polynomials, such as Legendre or Chebychev polynomials, modified to accommodate a C 0 - continuous expansion. Computationally and theoretically, by increasing the polynomial order p, high-precision solutions and fast convergence can be obtained and, in particular, under certain regularity assumptions an exponential reduction in approximation error between numerical and exact solutions can be achieved. This method has now been applied in many simulation studies of both fundamental and practical engineering flows. This paper briefly describes the formulation of the spectral/ hp element method and provides an overview of its application to computational fluid dynamics. In particular, it focuses on the use of the spectral/ hp element method in transitional flows and ocean engineering. Finally, some of the major challenges to be overcome in order to use the spectral/ hp element method in more complex science and engineering applications are discussed.

Application of thin layer activation method to industrial use

International Nuclear Information System (INIS)

Yamamoto, Masago; Hatakeyama, Noriko

1996-01-01

A thin layer activation method was reviewed for non-destructive, rapid, precise and real-time measurement of wear and corrosion. The review included wear measurement, the principle of the method, actual measurement, application, and laws and regulations. The method is to activate the material surface alone by accelerated ions like p, d and He ions produced by cyclotron, Van de Graaf apparatus or other accelerators and to utilize the yielded radioisotopes as a tracer, is widely used in the tribology field, and is more useful than the previous method with the reactor since it activated the whole material. Application of the method was reportedly resulted in saving the 80% cost and 90% time in the wear measurement of automobile parts such as engine and transmission. Actually, the activated material was combined into the part to be run and the radioactivity was to be measured externally or in the worn particles suitably collected. The activation thickness was generally in the range of 10-200 μm and the resultant radioactivity, 0.2-2 MBq. In most cases in Japan, the method would be under the law concerning prevention from radiation hazards due to radioisotopes, etc. (K.H.)

Nested partitions method, theory and applications

CERN Document Server

Shi, Leyuan

2009-01-01

There is increasing need to solve large-scale complex optimization problems in a wide variety of science and engineering applications, including designing telecommunication networks for multimedia transmission, planning and scheduling problems in manufacturing and military operations, or designing nanoscale devices and systems. Advances in technology and information systems have made such optimization problems more and more complicated in terms of size and uncertainty. Nested Partitions Method, Theory and Applications provides a cutting-edge research tool to use for large-scale, complex systems optimization. The Nested Partitions (NP) framework is an innovative mix of traditional optimization methodology and probabilistic assumptions. An important feature of the NP framework is that it combines many well-known optimization techniques, including dynamic programming, mixed integer programming, genetic algorithms and tabu search, while also integrating many problem-specific local search heuristics. The book uses...

Application of the selected physical methods in biological research

Directory of Open Access Journals (Sweden)

Jaromír Tlačbaba

2013-01-01

Full Text Available This paper deals with the application of acoustic emission (AE, which is a part of the non-destructive methods, currently having an extensive application. This method is used for measuring the internal defects of materials. AE has a high potential in further research and development to extend the application of this method even in the field of process engineering. For that matter, it is the most elaborate acoustic emission monitoring in laboratory conditions with regard to external stimuli. The aim of the project is to apply the acoustic emission recording the activity of bees in different seasons. The mission is to apply a new perspective on the behavior of colonies by means of acoustic emission, which collects a sound propagation in the material. Vibration is one of the integral part of communication in the community. Sensing colonies with the support of this method is used for understanding of colonies biological behavior to stimuli clutches, colony development etc. Simulating conditions supported by acoustic emission monitoring system the illustrate colonies activity. Collected information will be used to represent a comprehensive view of the life cycle and behavior of honey bees (Apis mellifera. Use of information about the activities of bees gives a comprehensive perspective on using of acoustic emission in the field of biological research.

Gastrin radioimmunoassay. Description and application of a novel method

International Nuclear Information System (INIS)

Nemeth, J.; Jakab, B.; Schweibert, I.; Szolcsanyi, J.; Oroszi, G.; Szilvassy, Z.

2002-01-01

Development and application of a novel gastrin radioimmunoassay (RIA) are described. 125 I-labeling of non-sulphated human gastrin-17 (nshG-17) was performed by the iodogen method and the mono-iodinated hormone, as RIA tracer, was separated by reversed-phase high performance liquid chromatography (HPLC). Serum gastrin levels were measured in response to intravenous application of isoproterenol, a non-selective beta and phenylephrine, a selective alpha-1 receptor agonist using a newly developed method specific for the C-terminal part of the hormone in rats. Isoproterenol at clinically relevant doses elicited a significant increase in serum gastrin concentration in a dose-dependent fashion, whereas phenylephrine was without effect. (author)

Inverse operator theory method and its applications in nonlinear physics

International Nuclear Information System (INIS)

Fang Jinqing

1993-01-01

Inverse operator theory method, which has been developed by G. Adomian in recent years, and its applications in nonlinear physics are described systematically. The method can be an unified effective procedure for solution of nonlinear and/or stochastic continuous dynamical systems without usual restrictive assumption. It is realized by Mathematical Mechanization by us. It will have a profound on the modelling of problems of physics, mathematics, engineering, economics, biology, and so on. Some typical examples of the application are given and reviewed

Type T reference function suitability for low temperature applications

Science.gov (United States)

Dowell, D.

2013-09-01

Type T thermocouples are commonly used in industrial measurement applications due to their accuracy relative to other thermocouple types, low cost, and the ready availability of measurement equipment. Type T thermocouples are very effective when used in differential measurements, as there is no cold junction compensation necessary for the connections to the measurement equipment. Type T's published accuracy specifications result in its frequent use in low temperature applications. An examination of over 328 samples from a number of manufacturers has been completed for this investigation. Samples were compared to a Standard Platinum Resistance Thermometer (SPRT) at the LN2 boiling point along with four other standardized measurement points using a characterized ice point reference, low-thermal EMF scanner and an 8.5 digit multimeter, and the data compiled and analyzed. The test points were approximately -196 °C, -75 °C, 0 °C, +100 °C, and +200 °C. These data show an anomaly in the conformance to the reference functions where the reference functions meet at 0 °C. Additionally, in the temperature region between -100 °C to -200 °C, a positive offset of up to 5.4 °C exists between the reference function equations published in the ASTM E230-06 for the nitrogen point and the measured response of the actual wire. This paper will examine the historical and technological reasons for this anomaly in the both the ASTM and IEC reference functions. At the request of the author and the Proceedings Editor the above article has been replaced with a corrected version. The original PDF file supplied to AIP Publishing contained several figures with missing information/characters—caused by processes used to generate the PDF file. All figures were affected by this error. The article has been replaced and these figures now display correctly. The corrected article was published on 7 November 2013.

New methods to interpolate large volume of data from points or particles (Mesh-Free) methods application for its scientific visualization

International Nuclear Information System (INIS)

Reyes Lopez, Y.; Yervilla Herrera, H.; Viamontes Esquivel, A.; Recarey Morfa, C. A.

2009-01-01

In the following paper we developed a new method to interpolate large volumes of scattered data, focused mainly on the results of the Mesh free Methods, Points Methods and the Particles Methods application. Through this one, we use local radial basis function as interpolating functions. We also use over-tree as the data structure that allows to accelerate the localization of the data that influences to interpolate the values at a new point, speeding up the application of scientific visualization techniques to generate images from large data volumes from the application of Mesh-free Methods, Points and Particle Methods, in the resolution of diverse models of physics-mathematics. As an example, the results obtained after applying this method using the local interpolation functions of Shepard are shown. (Author) 22 refs

Monte Carlo methods and applications in nuclear physics

International Nuclear Information System (INIS)

Carlson, J.

1990-01-01

Monte Carlo methods for studying few- and many-body quantum systems are introduced, with special emphasis given to their applications in nuclear physics. Variational and Green's function Monte Carlo methods are presented in some detail. The status of calculations of light nuclei is reviewed, including discussions of the three-nucleon-interaction, charge and magnetic form factors, the coulomb sum rule, and studies of low-energy radiative transitions. 58 refs., 12 figs

Doses and application methods of Azospirillum brasilense in irrigated upland rice

Directory of Open Access Journals (Sweden)

Nayara F. S. Garcia

Full Text Available ABSTRACT The study was carried out in Selvíria-MS, in the 2011/12 and 2012/13 agricultural years, aiming to evaluate the efficiency of Azospirillum brasilense in nitrogen fixation in upland rice, as a function of doses and application methods of the inoculant containing this diazotrophic bacterium. The experimental design was randomized blocks, arranged in a 4 x 4 factorial scheme, with 4 doses of inoculant (control without inoculation, 100, 200 and 300 mL of the commercial product ha-1 and 4 application methods (seed inoculation, application in the sowing furrow, soil spraying after sowing, and foliar spraying at the beginning of plant tillering, with 4 replicates. During the experiment, the agronomic characteristics, production components and yield of the rice crop were evaluated. It was concluded that the inoculant containing Azospirillum brasilense promotes increase (19% in the yield of upland rice under sprinkler irrigation when used at the dose of 200 mL ha-1, regardless of the application methods.

The stochastic finite element methods with applications in geotechnics and rupture mechanics

International Nuclear Information System (INIS)

Baldeweck, Herve

1999-01-01

After having presented and classified the various stochastic finite elements methods, notably by distinguishing reliability methods (first order and second order reliability methods, response surfaces, Monte Carlo) and sensitivity methods (Monte Carlo, spectral development, perturbation, weighted integrals), the author of this research thesis presents basic tools needed for different theoretical developments: hazard representation and method of moments. He also presents the problem which is used all along this work to compare and assess the different sensitivity methods. Then, he reports the theoretical development of these sensitivity methods: the Monte Carlo method, the spectral development method, the perturbation method, and the quadrature method. This last one is a new one aimed at the assessment of statistical moments. The author highlights the relationships between reliability and sensitivity methods. In the third part, several applications and calculations are reported. Applications are in geotechnics (soil-structure interaction, calculation of soil stiffness, application in the field of geo-materials with the calculation of an underground gallery), and in rupture mechanics (international benchmark on the reliability of a nuclear reactor, non linear calculation of a cracked straight pipe, reliability calculation of a cracked plate with a Young modulus being a random field) [fr

Fuzzy multiple objective decision making methods and applications

CERN Document Server

Lai, Young-Jou

1994-01-01

In the last 25 years, the fuzzy set theory has been applied in many disciplines such as operations research, management science, control theory, artificial intelligence/expert system, etc. In this volume, methods and applications of crisp, fuzzy and possibilistic multiple objective decision making are first systematically and thoroughly reviewed and classified. This state-of-the-art survey provides readers with a capsule look into the existing methods, and their characteristics and applicability to analysis of fuzzy and possibilistic programming problems. To realize practical fuzzy modelling, it presents solutions for real-world problems including production/manufacturing, location, logistics, environment management, banking/finance, personnel, marketing, accounting, agriculture economics and data analysis. This book is a guided tour through the literature in the rapidly growing fields of operations research and decision making and includes the most up-to-date bibliographical listing of literature on the topi...

Monte Carlo methods and applications in nuclear physics

Energy Technology Data Exchange (ETDEWEB)

Carlson, J.

1990-01-01

Monte Carlo methods for studying few- and many-body quantum systems are introduced, with special emphasis given to their applications in nuclear physics. Variational and Green's function Monte Carlo methods are presented in some detail. The status of calculations of light nuclei is reviewed, including discussions of the three-nucleon-interaction, charge and magnetic form factors, the coulomb sum rule, and studies of low-energy radiative transitions. 58 refs., 12 figs.

[Research Progress and Prospect of Applications of Finite Element Method in Lumbar Spine Biomechanics].

Science.gov (United States)

Zhang, Zhenjun; Li, Yang; Liao, Zhenhua; Liu, Weiqiang

2016-12-01

Based on the application of finite element analysis in spine biomechanics,the research progress of finite element method applied in lumbar spine mechanics is reviewed and the prospect is forecasted.The related works,including lumbar ontology modeling,clinical application research,and occupational injury and protection,are summarized.The main research areas of finite element method are as follows:new accurate modeling process,the optimized simulation method,diversified clinical effect evaluation,and the clinical application of artificial lumbar disc.According to the recent research progress,the application prospects of finite element method,such as automation and individuation of modeling process,evaluation and analysis of new operation methods and simulation of mechanical damage and dynamic response,are discussed.The purpose of this paper is to provide the theoretical reference and practical guidance for the clinical lumbar problems by reviewing the application of finite element method in the field of the lumbar spine biomechanics.

Clustering Methods Application for Customer Segmentation to Manage Advertisement Campaign

OpenAIRE

Maciej Kutera; Mirosława Lasek

2010-01-01

Clustering methods are recently so advanced elaborated algorithms for large collection data analysis that they have been already included today to data mining methods. Clustering methods are nowadays larger and larger group of methods, very quickly evolving and having more and more various applications. In the article, our research concerning usefulness of clustering methods in customer segmentation to manage advertisement campaign is presented. We introduce results obtained by using four sel...

Comparative study of different application methods of 14C-Fosthiazate in tomato plants

International Nuclear Information System (INIS)

Nitesh Sharma; Surendra Kumar

2011-01-01

A comparative study of different application methods of nematicide 14 C-Fosthiazate was done for the uptake in tomato plants in two varieties Pusa Ruby and Pusa Early Dwarf. The application methods used for the research purpose are seed treatment, soil supplication and drip application in presence and absence of surfactant (Tween-80).It as found that percent absorption was the highest in the drip irrigation method in presence of surfactant. The percent uptake of 14 C-Fosthiazate in two varieties of tomato plants was found to be higher in Pusa Early Dwarf in all the treatment methods. (author)

Application of DNA-based methods in forensic entomology.

Science.gov (United States)

Wells, Jeffrey D; Stevens, Jamie R

2008-01-01

A forensic entomological investigation can benefit from a variety of widely practiced molecular genotyping methods. The most commonly used is DNA-based specimen identification. Other applications include the identification of insect gut contents and the characterization of the population genetic structure of a forensically important insect species. The proper application of these procedures demands that the analyst be technically expert. However, one must also be aware of the extensive list of standards and expectations that many legal systems have developed for forensic DNA analysis. We summarize the DNA techniques that are currently used in, or have been proposed for, forensic entomology and review established genetic analyses from other scientific fields that address questions similar to those in forensic entomology. We describe how accepted standards for forensic DNA practice and method validation are likely to apply to insect evidence used in a death or other forensic entomological investigation.

New application of Exp-function method for improved Boussinesq equation

Energy Technology Data Exchange (ETDEWEB)

Abdou, M.A. [Theoretical Research Group, Physics Department, Faculty of Science, Mansoura University, 35516 Mansoura (Egypt); Department of Physics, Faculty of Education for Girls, Science Departments, King Khalid University, Bisha (Saudi Arabia)], E-mail: m_abdou_eg@yahoo.com; Soliman, A.A. [Department of Mathematics, Faculty of Education (AL-Arish) Suez Canal University, AL-Arish 45111 (Egypt); Department of Mathematics, Teacher' s College (Bisha), King Khalid University, Bisha, PO Box 551 (Saudi Arabia)], E-mail: asoliman_99@yahoo.com; El-Basyony, S.T. [Theoretical Research Group, Physics Department, Faculty of Science, Mansoura University, 35516 Mansoura (Egypt)

2007-10-01

The Exp-function method is used to obtain generalized solitary solutions and periodic solutions for nonlinear evolution equations arising in mathematical physics with the aid of symbolic computation method, namely, the improved Boussinesq equation. The method is straightforward and concise, and its applications is promising for other nonlinear evolution equations in mathematical physics.

An evaluation on CT image acquisition method for medical VR applications

Science.gov (United States)

Jang, Seong-wook; Ko, Junho; Yoo, Yon-sik; Kim, Yoonsang

2017-02-01

Recent medical virtual reality (VR) applications to minimize re-operations are being studied for improvements in surgical efficiency and reduction of operation error. The CT image acquisition method considering three-dimensional (3D) modeling for medical VR applications is important, because the realistic model is required for the actual human organ. However, the research for medical VR applications has focused on 3D modeling techniques and utilized 3D models. In addition, research on a CT image acquisition method considering 3D modeling has never been reported. The conventional CT image acquisition method involves scanning a limited area of the lesion for the diagnosis of doctors once or twice. However, the medical VR application is required to acquire the CT image considering patients' various postures and a wider area than the lesion. A wider area than the lesion is required because of the necessary process of comparing bilateral sides for dyskinesia diagnosis of the shoulder, pelvis, and leg. Moreover, patients' various postures are required due to the different effects on the musculoskeletal system. Therefore, in this paper, we perform a comparative experiment on the acquired CT images considering image area (unilateral/bilateral) and patients' postures (neutral/abducted). CT images are acquired from 10 patients for the experiments, and the acquired CT images are evaluated based on the length per pixel and the morphological deviation. Finally, by comparing the experiment results, we evaluate the CT image acquisition method for medical VR applications.

Applicability of optical scanner method for fine root dynamics

Science.gov (United States)

Kume, Tomonori; Ohashi, Mizue; Makita, Naoki; Khoon Kho, Lip; Katayama, Ayumi; Matsumoto, Kazuho; Ikeno, Hidetoshi

2016-04-01

Fine root dynamics is one of the important components in forest carbon cycling, as ~60 % of tree photosynthetic production can be allocated to root growth and metabolic activities. Various techniques have been developed for monitoring fine root biomass, production, mortality in order to understand carbon pools and fluxes resulting from fine roots dynamics. The minirhizotron method is now a widely used technique, in which a transparent tube is inserted into the soil and researchers count an increase and decrease of roots along the tube using images taken by a minirhizotron camera or minirhizotron video camera inside the tube. This method allows us to observe root behavior directly without destruction, but has several weaknesses; e.g., the difficulty of scaling up the results to stand level because of the small observation windows. Also, most of the image analysis are performed manually, which may yield insufficient quantitative and objective data. Recently, scanner method has been proposed, which can produce much bigger-size images (A4-size) with lower cost than those of the minirhizotron methods. However, laborious and time-consuming image analysis still limits the applicability of this method. In this study, therefore, we aimed to develop a new protocol for scanner image analysis to extract root behavior in soil. We evaluated applicability of this method in two ways; 1) the impact of different observers including root-study professionals, semi- and non-professionals on the detected results of root dynamics such as abundance, growth, and decomposition, and 2) the impact of window size on the results using a random sampling basis exercise. We applied our new protocol to analyze temporal changes of root behavior from sequential scanner images derived from a Bornean tropical forests. The results detected by the six observers showed considerable concordance in temporal changes in the abundance and the growth of fine roots but less in the decomposition. We also examined

Applications of the rotating orientation XRD method to oriented materials

International Nuclear Information System (INIS)

Guo Zhenqi; Li Fei; Jin Li; Bai Yu

2009-01-01

The rotating orientation x-ray diffraction (RO-XRD) method, based on conventional XRD instruments by a modification of the sample stage, was introduced to investigate the orientation-related issues of such materials. In this paper, we show its applications including the determination of single crystal orientation, assistance in crystal cutting and evaluation of crystal quality. The interpretation of scanning patterns by RO-XRD on polycrystals with large grains, bulk material with several grains and oriented thin film is also presented. These results will hopefully expand the applications of the RO-XRD method and also benefit the conventional XRD techniques. (fast track communication)

Method for application of nitrogen-15-labeled anhydrous ammonia to small plots

International Nuclear Information System (INIS)

Sanchez, C.A.; Blackmer, A.M.

1987-01-01

A method is described that permits precise application of anhydrous ammonia in bands to plots of the size often used in 15 N-tracer studies. This method involves placing a stainless-steel capillary tube in the soil where the ammonia is to be banded, attaching this tube to a cylinder of ammonia, and then pulling the tube through the soil with deposition of ammonia as an even band. The procedure has marked advantages over previously described methods because it can be used with mixtures of anhydrous ammonia and nitrification inhibitors and because the soil environment at the point of application is representative of the soil environment found when a conventional applicator is used

Application of SBRA Method in Mechanics of Continetal Plates

Directory of Open Access Journals (Sweden)

Ivo WANDROL

2012-06-01

Full Text Available This paper shows the probabilistic SBRA Method application to the model of the behaviour of the lithosphere of the Earth. The method extends our initial work where we created the geomechanical model of the lithosphere. The basic idea was about the generation of thermoelastic waves due to thermal expansion of the rock mass and the ratcheting mechanisms.

Application of Sequence-based Methods in Human MicrobialEcology

Energy Technology Data Exchange (ETDEWEB)

Weng, Li; Rubin, Edward M.; Bristow, James

2005-08-29

Ecologists studying microbial life in the environment have recognized the enormous complexity of microbial diversity for many years, and the development of a variety of culture-independent methods, many of them coupled with high-throughput DNA sequencing, has allowed this diversity to be explored in ever greater detail. Despite the widespread application of these new techniques to the characterization of uncultivated microbes and microbial communities in the environment, their application to human health and disease has lagged behind. Because DNA based-techniques for defining uncultured microbes allow not only cataloging of microbial diversity, but also insight into microbial functions, investigators are beginning to apply these tools to the microbial communities that abound on and within us, in what has aptly been called the second Human Genome Project. In this review we discuss the sequence-based methods for microbial analysis that are currently available and their application to identify novel human pathogens, improve diagnosis of known infectious diseases, and to advance understanding of our relationship with microbial communities that normally reside in and on the human body.

Characterization of Developer Application Methods Used in Fluorescent Penetrant Inspection

Science.gov (United States)

Brasche, L. J. H.; Lopez, R.; Eisenmann, D.

2006-03-01

Fluorescent penetrant inspection (FPI) is the most widely used inspection method for aviation components seeing use for production as well as an inservice inspection applications. FPI is a multiple step process requiring attention to the process parameters for each step in order to enable a successful inspection. A multiyear program is underway to evaluate the most important factors affecting the performance of FPI, to determine whether existing industry specifications adequately address control of the process parameters, and to provide the needed engineering data to the public domain. The final step prior to the inspection is the application of developer with typical aviation inspections involving the use of dry powder (form d) usually applied using either a pressure wand or dust storm chamber. Results from several typical dust storm chambers and wand applications have shown less than optimal performance. Measurements of indication brightness and recording of the UVA image, and in some cases, formal probability of detection (POD) studies were used to assess the developer application methods. Key conclusions and initial recommendations are provided.

Application of finite element method in mechanical design of automotive parts

Science.gov (United States)

Gu, Suohai

2017-09-01

As an effective numerical analysis method, finite element method (FEM) has been widely used in mechanical design and other fields. In this paper, the development of FEM is introduced firstly, then the specific steps of FEM applications are illustrated and the difficulties of FEM are summarized in detail. Finally, applications of FEM in automobile components such as automobile wheel, steel plate spring, body frame, shaft parts and so on are summarized, compared with related research experiments.

Analytical Review of Data Visualization Methods in Application to Big Data

OpenAIRE

Gorodov, Evgeniy Yur’evich; Gubarev, Vasiliy Vasil’evich

2013-01-01

This paper describes the term Big Data in aspects of data representation and visualization. There are some specific problems in Big Data visualization, so there are definitions for these problems and a set of approaches to avoid them. Also, we make a review of existing methods for data visualization in application to Big Data and taking into account the described problems. Summarizing the result, we have provided a classification of visualization methods in application to Big Data.

Exergy method technical and ecological applications

CERN Document Server

Szargut, J

2005-01-01

The exergy method makes it possible to detect and quantify the possibilities of improving thermal and chemical processes and systems. The introduction of the concept ""thermo-ecological cost"" (cumulative consumption of non-renewable natural exergy resources) generated large application possibilities of exergy in ecology. This book contains a short presentation on the basic principles of exergy analysis and discusses new achievements in the field over the last 15 years. One of the most important issues considered by the distinguished author is the economy of non-renewable natural exergy.

Environmental and economic comparisons of manure application methods in farming systems.

Science.gov (United States)

Rotz, C A; Kleinman, P J A; Dell, C J; Veith, T L; Beegle, D B

2011-01-01

Alternative methods for applying livestock manure to no-till soils involve environmental and economic trade-offs. A process-level farm simulation model (Integrated Farm System Model) was used to evaluate methods for applying liquid dairy (Bos taurus L.) and swine (Sus scrofa L.) manure, including no application, broadcast spreading with and without incorporation by tillage, band application with soil aeration, and shallow disk injection. The model predicted ammonia emissions, nitrate leaching, and phosphorus (P) runoff losses similar to those measured over 4 yr of field trials. Each application method was simulated over 25 yr of weather on three Pennsylvania farms. On a swine and cow-calf beef operation under grass production, shallow disk injection increased profit by $340 yr(-1) while reducing ammonia nitrogen and soluble P losses by 48 and 70%, respectively. On a corn (Zea mays L.)-and-grass-based grazing dairy farm, shallow disk injection reduced ammonia loss by 21% and soluble P loss by 76% with little impact on farm profit. Incorporation by tillage and band application with aeration provided less environmental benefit with a net decrease in farm profit. On a large corn-and-alfalfa (Medicago sativa L.)-based dairy farm where manure nutrients were available in excess of crop needs, incorporation methods were not economically beneficial, but they provided environmental benefits with relatively low annual net costs ($13 to $18 cow). In all farming systems, shallow disk injection provided the greatest environmental benefit at the least cost or greatest profit for the producer. With these results, producers are better informed when selecting manure application equipment.

Application of the taguchi method in change management

Directory of Open Access Journals (Sweden)

Kata Ivić

2011-07-01

Full Text Available Application of the Taguchi methods results in efficient optimization of performance, quality and price, fast and accurate gathering of technical information, design and production of highly reliable products and processes at low prices, development of flexible technologies for designing of a whole group of high quality associated products. All this significantly reduces the duration of research, development and delivery. The most frequent use of the Taguchi methods is to improve existing products and production processes and to reduce the need for experiments. The Taguchi methods is a system of quality engineering which puts more emphasis on reduction of production costs and giving advantage to efficient use of engineering strategies than on the use of advanced statistical methods.

Application of New Variational Homotopy Perturbation Method For ...

African Journals Online (AJOL)

This paper discusses the application of the New Variational Homotopy Perturbation Method (NVHPM) for solving integro-differential equations. The advantage of the new Scheme is that it does not require discretization, linearization or any restrictive assumption of any form be fore it is applied. Several test problems are ...

Application of optical non-invasive methods in skin physiology

Science.gov (United States)

Lademann, J.; Patzelt, A.; Darvin, M.; Richter, H.; Antoniou, C.; Sterry, W.; Koch, S.

2008-05-01

In the present paper the application of optical non-invasive methods in dermatology and cosmetology is discussed. Laser scanning microscopy (LSM) and optical coherent tomography (OCT) are the most promising methods for this application. Using these methods, the analysis of different skin parameters like dryness and oiliness of the skin, the barrier function and the structure of furrows and wrinkles are discussed. Additionally the homogeneity of distribution of topically applied creams, as well as their penetration into the skin were investigated. It is shown that these methods are highly valuable in dermatology for diagnostic and therapy control and for basic research, for instance in the field of structure analysis of hair follicles and sweat glands. The vertical images of the tissue produced by OCT can be easily compared with histological sections. Unfortunately, the resolution of the OCT technique is not high enough to carry out measurements on a cellular level, as is possible by LSM. LSM has the advantage that it can be used for the investigation of penetration and storage processes of topically applied substances, if these substances have fluorescent properties or if they are fluorescent-labelled.

Application of optical non-invasive methods in skin physiology

International Nuclear Information System (INIS)

Lademann, J; Patzelt, A; Darvin, M; Richter, H; Sterry, W; Antoniou, C; Koch, S

2008-01-01

In the present paper the application of optical non-invasive methods in dermatology and cosmetology is discussed. Laser scanning microscopy (LSM) and optical coherent tomography (OCT) are the most promising methods for this application. Using these methods, the analysis of different skin parameters like dryness and oiliness of the skin, the barrier function and the structure of furrows and wrinkles are discussed. Additionally the homogeneity of distribution of topically applied creams, as well as their penetration into the skin were investigated. It is shown that these methods are highly valuable in dermatology for diagnostic and therapy control and for basic research, for instance in the field of structure analysis of hair follicles and sweat glands. The vertical images of the tissue produced by OCT can be easily compared with histological sections. Unfortunately, the resolution of the OCT technique is not high enough to carry out measurements on a cellular level, as is possible by LSM. LSM has the advantage that it can be used for the investigation of penetration and storage processes of topically applied substances, if these substances have fluorescent properties or if they are fluorescent-labelled

Advanced FDTD methods parallelization, acceleration, and engineering applications

CERN Document Server

Yu, Wenhua

2011-01-01

The finite-difference time-domain (FDTD) method has revolutionized antenna design and electromagnetics engineering. Here's a cutting-edge book that focuses on the performance optimization and engineering applications of FDTD simulation systems. Covering the latest developments in this area, this unique resource offer you expert advice on the FDTD method, hardware platforms, and network systems. Moreover the book offers guidance in distinguishing between the many different electromagnetics software packages on the market today. You also find a complete chapter dedicated to large multi-scale pro

Spectral methods in chemistry and physics applications to kinetic theory and quantum mechanics

CERN Document Server

Shizgal, Bernard

2015-01-01

This book is a pedagogical presentation of the application of spectral and pseudospectral methods to kinetic theory and quantum mechanics. There are additional applications to astrophysics, engineering, biology and many other fields. The main objective of this book is to provide the basic concepts to enable the use of spectral and pseudospectral methods to solve problems in diverse fields of interest and to a wide audience. While spectral methods are generally based on Fourier Series or Chebychev polynomials, non-classical polynomials and associated quadratures are used for many of the applications presented in the book. Fourier series methods are summarized with a discussion of the resolution of the Gibbs phenomenon. Classical and non-classical quadratures are used for the evaluation of integrals in reaction dynamics including nuclear fusion, radial integrals in density functional theory, in elastic scattering theory and other applications. The subject matter includes the calculation of transport coefficient...

A method of network topology optimization design considering application process characteristic

Science.gov (United States)

Wang, Chunlin; Huang, Ning; Bai, Yanan; Zhang, Shuo

2018-03-01

Communication networks are designed to meet the usage requirements of users for various network applications. The current studies of network topology optimization design mainly considered network traffic, which is the result of network application operation, but not a design element of communication networks. A network application is a procedure of the usage of services by users with some demanded performance requirements, and has obvious process characteristic. In this paper, we first propose a method to optimize the design of communication network topology considering the application process characteristic. Taking the minimum network delay as objective, and the cost of network design and network connective reliability as constraints, an optimization model of network topology design is formulated, and the optimal solution of network topology design is searched by Genetic Algorithm (GA). Furthermore, we investigate the influence of network topology parameter on network delay under the background of multiple process-oriented applications, which can guide the generation of initial population and then improve the efficiency of GA. Numerical simulations show the effectiveness and validity of our proposed method. Network topology optimization design considering applications can improve the reliability of applications, and provide guidance for network builders in the early stage of network design, which is of great significance in engineering practices.

Quantal density functional theory II. Approximation methods and applications

International Nuclear Information System (INIS)

Sahni, Viraht

2010-01-01

This book is on approximation methods and applications of Quantal Density Functional Theory (QDFT), a new local effective-potential-energy theory of electronic structure. What distinguishes the theory from traditional density functional theory is that the electron correlations due to the Pauli exclusion principle, Coulomb repulsion, and the correlation contribution to the kinetic energy -- the Correlation-Kinetic effects -- are separately and explicitly defined. As such it is possible to study each property of interest as a function of the different electron correlations. Approximations methods based on the incorporation of different electron correlations, as well as a many-body perturbation theory within the context of QDFT, are developed. The applications are to the few-electron inhomogeneous electron gas systems in atoms and molecules, as well as to the many-electron inhomogeneity at metallic surfaces. (orig.)

Effects of Fungicides, Time of Application, and Application Method on Control of Sclerotinia Blight in Peanut

Directory of Open Access Journals (Sweden)

Jason E. Woodward

2015-01-01

Full Text Available Field studies were conducted from 2007 to 2010 to evaluate the response of peanut cultivars to different fungicides, application timings, and methods. Overall, fungicides reduced Sclerotinia blight incidence and increased pod yields when applied to susceptible and partially resistant cultivars. Disease suppression was greater when full fungicide rates were applied preventatively; however, yields between fungicide treated plots were similar. Lower levels of disease and higher yields were achieved with the partially resistant cultivar Tamrun OL07 compared to the susceptible cultivars Flavor Runner 458 and Tamrun OL 02. Despite possessing improved resistance Tamrun OL07 responded to all fungicide applications. While similar levels of disease control were achieved with broadcast or banded applications made during the day or at night, the yield response for the different application methods was inconsistent among years. A negative relationship (slope = −73.8; R2=0.73; P<0.01 was observed between final disease incidence ratings and yield data from studies where a fungicide response was observed. These studies suggest that both boscalid and fluazinam are effective at controlling Sclerotinia blight in peanuts. Alternative management strategies such as nighttime and banded applications could allow for lower fungicide rates to be used; however, additional studies are warranted.

Hybrid Particle-Continuum Numerical Methods for Aerospace Applications

Science.gov (United States)

2011-01-01

Many applications of MEMS/NEMS devices, which include micro- turbines [3, 4], micro-sensors for chemical con- centrations or gas ow properties [5, 6, 7...Oran, E. S., and Kaplan , C. R., The Coupled Multiscale Multiphysics Method (CM3) for Rareed Gas Flows, AIAA 2010-823, 2010. [63] Holman, T. D

Computational simulation in architectural and environmental acoustics methods and applications of wave-based computation

CERN Document Server

Sakamoto, Shinichi; Otsuru, Toru

2014-01-01

This book reviews a variety of methods for wave-based acoustic simulation and recent applications to architectural and environmental acoustic problems. Following an introduction providing an overview of computational simulation of sound environment, the book is in two parts: four chapters on methods and four chapters on applications. The first part explains the fundamentals and advanced techniques for three popular methods, namely, the finite-difference time-domain method, the finite element method, and the boundary element method, as well as alternative time-domain methods. The second part demonstrates various applications to room acoustics simulation, noise propagation simulation, acoustic property simulation for building components, and auralization. This book is a valuable reference that covers the state of the art in computational simulation for architectural and environmental acoustics.  

Application of Lyapunov's Second Method in the Stability Analysis of ...

African Journals Online (AJOL)

In this paper, Lyapunov's method for determining the stability of non-linear systems under dynamic states is presented. The paper highlights a practical application of the method to investigate the stability of crude oil/natural gas separation process. Mathematical state models for the separation process, used in the ...

Introduction to First-Principles Electronic Structure Methods: Application to Actinide Materials

International Nuclear Information System (INIS)

Klepeis, J E

2005-01-01

The purpose of this paper is to provide an introduction for non-experts to first-principles electronic structure methods that are widely used in the field of condensed-matter physics, including applications to actinide materials. The methods I describe are based on density functional theory (DFT) within the local density approximation (LDA) and the generalized gradient approximation (GGA). In addition to explaining the meaning of this terminology I also describe the underlying theory itself in some detail in order to enable a better understanding of the relative strengths and weaknesses of the methods. I briefly mention some particular numerical implementations of DFT, including the linear muffin-tin orbital (LMTO), linear augmented plane wave (LAPW), and pseudopotential methods, as well as general methodologies that go beyond DFT and specifically address some of the weaknesses of the theory. The last third of the paper is devoted to a few selected applications that illustrate the ideas discussed in the first two-thirds. In particular, I conclude by addressing the current controversy regarding magnetic DFT calculations for actinide materials. Throughout this paper particular emphasis is placed on providing the appropriate background to enable the non-expert to gain a better appreciation of the application of first-principles electronic structure methods to the study of actinide and other materials

Cost accounting method for in-situ leaching mines and its application

International Nuclear Information System (INIS)

Cheng Zongfang; Yang Yihan; Liu Zhanxiang; Lai Yongchun

2008-01-01

Cost structures and accounting method for in-situ leaching mines are studied according to the technical characteeristics of in-situ leaching. A method of cost forecast for in-situ leaching deposit or mine area is presented, and the application of this method is illustrated with examples. (authors)

Reconstruction of a ring applicator using CT imaging: impact of the reconstruction method and applicator orientation

DEFF Research Database (Denmark)

Hellebust, Taran Paulsen; Tanderup, Kari; Bergstrand, Eva Stabell

2007-01-01

in multiplanar reconstructed images (MPR) and (3) library plans, using pre-defined applicator geometry (LIB). The doses to the lead pellets were calculated. The relative standard deviation (SD) for all reconstruction methods was less than 3.7% in the dose points. The relative SD for the LIB method...

Evolutionary Computation Methods and their applications in Statistics

Directory of Open Access Journals (Sweden)

Francesco Battaglia

2013-05-01

Full Text Available A brief discussion of the genesis of evolutionary computation methods, their relationship to artificial intelligence, and the contribution of genetics and Darwin’s theory of natural evolution is provided. Then, the main evolutionary computation methods are illustrated: evolution strategies, genetic algorithms, estimation of distribution algorithms, differential evolution, and a brief description of some evolutionary behavior methods such as ant colony and particle swarm optimization. We also discuss the role of the genetic algorithm for multivariate probability distribution random generation, rather than as a function optimizer. Finally, some relevant applications of genetic algorithm to statistical problems are reviewed: selection of variables in regression, time series model building, outlier identification, cluster analysis, design of experiments.

The application of surface electrical and shallow geothermic methods in monitoring network design.

Science.gov (United States)

Gilkeson, R.H.; Cartwright, K.

1983-01-01

There are a variety of surface geophysical methods that are routinely used in geologic investigations. The three broad applications of these methods to evaluate the impact of waste disposal on shallow groundwater flow systems are: 1) evaluation of proposed waste disposal sites; 2) monitoring of site performance; and 3) investigation of contaminant migration at existing sites. Electrical and shallow geothermic are two surface geophysical methods that have application to waste disposal investigations. Of the electrical methods, electrical resistivity has the greatest application with a variety of techniques available. The distribution of temperature in shallow geologic materials (shallow geothermics) may define characteristics of shallow groundwater flow systems including zones of recharge and discharge and lithologic variation in the shallow geologic materials.-from Authors

A reliability evaluation method for NPP safety DCS application software

International Nuclear Information System (INIS)

Li Yunjian; Zhang Lei; Liu Yuan

2014-01-01

In the field of nuclear power plant (NPP) digital i and c application, reliability evaluation for safety DCS application software is a key obstacle to be removed. In order to quantitatively evaluate reliability of NPP safety DCS application software, this paper propose a reliability evaluating method based on software development life cycle every stage's v and v defects density characteristics, by which the operating reliability level of the software can be predicted before its delivery, and helps to improve the reliability of NPP safety important software. (authors)

Cross-relaxation imaging:methods, challenges and applications

International Nuclear Information System (INIS)

Stikov, Nikola

2010-01-01

An overview of quantitative magnetization transfer (qMT) is given, with focus on cross relaxation imaging (CRI) as a fast method for quantifying the proportion of protons bound to complex macromolecules in tissue. The procedure for generating CRI maps is outlined, showing examples in the human brain and knee, and discussing the caveats and challenges in generating precise and accurate CRI maps. Finally, several applications of CRI for imaging tissue microstructure are presented.(Author)

The applicability of micro-filters produced by nuclear methods in the food industry

International Nuclear Information System (INIS)

Szabo, S.A.; Ember, G.

1982-01-01

Problems of the applicability in the food industry of micro-filters produced by nuclear methods are dealt with. Production methods of the polymeric micro-filters, their main characteristics as well as their most important application fields (breweries, dairies, alcoholic- and soft-drink plants, wine industry) are briefly reviewed. (author)

Application of Canonical Effective Methods to Background-Independent Theories

Science.gov (United States)

Buyukcam, Umut

Effective formalisms play an important role in analyzing phenomena above some given length scale when complete theories are not accessible. In diverse exotic but physically important cases, the usual path-integral techniques used in a standard Quantum Field Theory approach seldom serve as adequate tools. This thesis exposes a new effective method for quantum systems, called the Canonical Effective Method, which owns particularly wide applicability in backgroundindependent theories as in the case of gravitational phenomena. The central purpose of this work is to employ these techniques to obtain semi-classical dynamics from canonical quantum gravity theories. Application to non-associative quantum mechanics is developed and testable results are obtained. Types of non-associative algebras relevant for magnetic-monopole systems are discussed. Possible modifications of hypersurface deformation algebra and the emergence of effective space-times are presented. iii.

The Application of Determining Students’ Graduation Status of STMIK Palangkaraya Using K-Nearest Neighbors Method

Science.gov (United States)

Rusdiana, Lili; Marfuah

2017-12-01

K-Nearest Neighbors method is one of methods used for classification which calculate a value to find out the closest in distance. It is used to group a set of data such as students’ graduation status that are got from the amount of course credits taken by them, the grade point average (AVG), and the mini-thesis grade. The study is conducted to know the results of using K-Nearest Neighbors method on the application of determining students’ graduation status, so it can be analyzed from the method used, the data, and the application constructed. The aim of this study is to find out the application results by using K-Nearest Neighbors concept to determine students’ graduation status using the data of STMIK Palangkaraya students. The development of the software used Extreme Programming, since it was appropriate and precise for this study which was to quickly finish the project. The application was created using Microsoft Office Excel 2007 for the training data and Matlab 7 to implement the application. The result of K-Nearest Neighbors method on the application of determining students’ graduation status was 92.5%. It could determine the predicate graduation of 94 data used from the initial data before the processing as many as 136 data which the maximal training data was 50data. The K-Nearest Neighbors method is one of methods used to group a set of data based on the closest value, so that using K-Nearest Neighbors method agreed with this study. The results of K-Nearest Neighbors method on the application of determining students’ graduation status was 92.5% could determine the predicate graduation which is the maximal training data. The K-Nearest Neighbors method is one of methods used to group a set of data based on the closest value, so that using K-Nearest Neighbors method agreed with this study.

The application of mixed methods designs to trauma research.

Science.gov (United States)

Creswell, John W; Zhang, Wanqing

2009-12-01

Despite the use of quantitative and qualitative data in trauma research and therapy, mixed methods studies in this field have not been analyzed to help researchers designing investigations. This discussion begins by reviewing four core characteristics of mixed methods research in the social and human sciences. Combining these characteristics, the authors focus on four select mixed methods designs that are applicable in trauma research. These designs are defined and their essential elements noted. Applying these designs to trauma research, a search was conducted to locate mixed methods trauma studies. From this search, one sample study was selected, and its characteristics of mixed methods procedures noted. Finally, drawing on other mixed methods designs available, several follow-up mixed methods studies were described for this sample study, enabling trauma researchers to view design options for applying mixed methods research in trauma investigations.

Quantum statistical Monte Carlo methods and applications to spin systems

International Nuclear Information System (INIS)

Suzuki, M.

1986-01-01

A short review is given concerning the quantum statistical Monte Carlo method based on the equivalence theorem that d-dimensional quantum systems are mapped onto (d+1)-dimensional classical systems. The convergence property of this approximate tansformation is discussed in detail. Some applications of this general appoach to quantum spin systems are reviewed. A new Monte Carlo method, ''thermo field Monte Carlo method,'' is presented, which is an extension of the projection Monte Carlo method at zero temperature to that at finite temperatures

A review of the magnetic properties, synthesis methods and applications of maghemite

Energy Technology Data Exchange (ETDEWEB)

Shokrollahi, H., E-mail: shokrollahi@sutech.ac.ir

2017-03-15

It must be pointed out that maghemite (γ-Fe{sub 2}O{sub 3}) with a cubic spinel structure is a crucial material for various applications, including spin electronic devices, high-density magnetic recording, nano-medicines and biosensors. This paper has to do with a review study on the synthesis methods, magnetic properties and application of maghemite in the form of one-dimensional (1D) nanostructured materials, such as nanoparticles, nanotubes, nano-rods, and nanowires, as well as two-dimensional (2D) thin films. The results revealed that maghemite is widely used in the biomedical applications (hyperthermia, magnetic resonance imaging and drug delivery) and magnetic recording devices. The unmodified and Co/Mn modified maghemite thin films prepared by the dc-reactive magnetron sputtering show the excellent values of coercivity 2100 Oe and 3900 Oe, respectively, for the magnetic storage application. The super-paramagnetic particles with 7 nm size and the saturation magnetization of 80 emu/g prepared by the established thermolysis method are good candidates for bio-medical applications. - Highlights: • Among iron oxides, maghemite is one of the most important magnetic ceramics. • Maghemite is widely sued in magnetic recording and biomedicine. • This paper attempts to give an overview on the some important areas. • They contain synthetic methods, magnetic study, structural study and applications.

Comparative study among calibration methods of clinical applicators of beta radiation

International Nuclear Information System (INIS)

Antonio, Patricia de Lara

2009-01-01

90 Sr+ 90 Y clinical applicators are instruments used in brachytherapy procedures and they have to be periodically calibrated, according to international standards and recommendations. In this work, four calibration methods of dermatological and ophthalmic applicators were studied, comparing the results with those given by the calibration certificates of the manufacturers. The methods included the use of the standard applicator of the Calibration Laboratory (LCI), calibrated by the National Institute of Standards and Technology; an Amersham applicator (LCI) as reference; a mini-extrapolation chamber developed at LCI as an absolute standard; and thermoluminescent dosimetry. The mini-extrapolation chamber and a PTW commercial extrapolation chamber were studied in relation to their performance through quality control tests of their response, as leakage current, repeatability and reproducibility. The distribution of the depth dose in water, that presents high importance in dosimetry of clinical applicators, was determined using the mini extrapolation chamber and the thermoluminescent dosimeters. The results obtained were considered satisfactory for the both cases, and comparable to the data of the IAEA (2002) standard. Furthermore, a dosimetry postal kit was developed for the calibration of clinical applicators using the thermoluminescent technique, to be sent to clinics and hospitals, without the need of the transport of the sources to IPEN for calibration. (author)

Novel applications of fast neutron interrogation methods

International Nuclear Information System (INIS)

Gozani, Tsahi

1994-01-01

The development of non-intrusive inspection methods for contraband consisting primarily of carbon, nitrogen, oxygen, and hydrogen requires the use of fast neutrons. While most elements can be sufficiently well detected by the thermal neutron capture process, some important ones, e.g., carbon and in particular oxygen, cannot be detected by this process. Fortunately, fast neutrons, with energies above the threshold for inelastic scattering, stimulate relatively strong and specific gamma ray lines from these elements. The main lines are: 6.13 for O, 4.43 for C, and 5.11, 2.31 and 1.64 MeV for N. Accelerator-generated neutrons in the energy range of 7 to 15 MeV are being considered as interrogating radiations in a variety of non-intrusive inspection systems for contraband, from explosives to drugs and from coal to smuggled, dutiable goods. In some applications, mostly for inspection of small items such as luggage, the decision process involves a rudimentary imaging, akin to emission tomography, to obtain the localized concentration of various elements. This technique is called FNA - Fast Neutron Analysis. While this approach offers improvements over the TNA (Thermal Neutron Analysis), it is not applicable to large objects such as shipping containers and trucks. For these challenging applications, a collimated beam of neutrons is rastered along the height of the moving object. In addition, the neutrons are generated in very narrow nanosecond pulses. The point of their interaction inside the object is determined by the time of flight (TOF) method, that is measuring the time elapsed from the neutron generation to the time of detection of the stimulated gamma rays. This technique, called PFNA (Pulsed Fast Neutron Analysis), thus directly provides the elemental, and by inference, the chemical composition of the material at every volume element (voxel) of the object. The various neutron-based techniques are briefly described below. ((orig.))

Applicability of transfer tensor method for open quantum system dynamics.

Science.gov (United States)

Gelzinis, Andrius; Rybakovas, Edvardas; Valkunas, Leonas

2017-12-21

Accurate simulations of open quantum system dynamics is a long standing issue in the field of chemical physics. Exact methods exist, but are costly, while perturbative methods are limited in their applicability. Recently a new black-box type method, called transfer tensor method (TTM), was proposed [J. Cerrillo and J. Cao, Phys. Rev. Lett. 112, 110401 (2014)]. It allows one to accurately simulate long time dynamics with a numerical cost of solving a time-convolution master equation, provided many initial system evolution trajectories are obtained from some exact method beforehand. The possible time-savings thus strongly depend on the ratio of total versus initial evolution lengths. In this work, we investigate the parameter regimes where an application of TTM would be most beneficial in terms of computational time. We identify several promising parameter regimes. Although some of them correspond to cases when perturbative theories could be expected to perform well, we find that the accuracy of such approaches depends on system parameters in a more complex way than it is commonly thought. We propose that the TTM should be applied whenever system evolution is expected to be long and accuracy of perturbative methods cannot be ensured or in cases when the system under consideration does not correspond to any single perturbative regime.

Statistical disclosure control for microdata methods and applications in R

CERN Document Server

Templ, Matthias

2017-01-01

This book on statistical disclosure control presents the theory, applications and software implementation of the traditional approach to (micro)data anonymization, including data perturbation methods, disclosure risk, data utility, information loss and methods for simulating synthetic data. Introducing readers to the R packages sdcMicro and simPop, the book also features numerous examples and exercises with solutions, as well as case studies with real-world data, accompanied by the underlying R code to allow readers to reproduce all results. The demand for and volume of data from surveys, registers or other sources containing sensible information on persons or enterprises have increased significantly over the last several years. At the same time, privacy protection principles and regulations have imposed restrictions on the access and use of individual data. Proper and secure microdata dissemination calls for the application of statistical disclosure control methods to the data before release. This book is in...

Low temperature plasma technology methods and applications

CERN Document Server

Chu, Paul K

2013-01-01

Written by a team of pioneering scientists from around the world, Low Temperature Plasma Technology: Methods and Applications brings together recent technological advances and research in the rapidly growing field of low temperature plasmas. The book provides a comprehensive overview of related phenomena such as plasma bullets, plasma penetration into biofilms, discharge-mode transition of atmospheric pressure plasmas, and self-organization of microdischarges. It describes relevant technology and diagnostics, including nanosecond pulsed discharge, cavity ringdown spectroscopy, and laser-induce

Microautoradiographic methods and their applications in biology

International Nuclear Information System (INIS)

Benes, L.

1978-01-01

A survey of microautoradiographic methods and of their application in biology is given. The current state of biological microautoradiography is shown, focusing on the efficiency of techniques and on special problems proceeding in autoradiographic investigations in biology. Four more or less independent fields of autoradiography are considered. In describing autoradiographic techniques two methodological tasks are emphasized: The further development of the labelling technique in all metabolic studies and of instrumentation and automation of autoradiograph evaluation. (author)

An Application of Taylor Models to the Nakao Method on ODEs

OpenAIRE

Yamamoto, Nobito; Komori, Takashi

2009-01-01

The authors give short survey on validated computaion of initial value problems for ODEs especially Taylor model methods. Then they propose an application of Taylor models to the Nakao method which has been developed for numerical verification methods on PDEs and apply it to initial value problems for ODEs with some numerical experiments.

Partial differential equations methods, applications and theories

CERN Document Server

Hattori, Harumi

2013-01-01

This volume is an introductory level textbook for partial differential equations (PDE's) and suitable for a one-semester undergraduate level or two-semester graduate level course in PDE's or applied mathematics. Chapters One to Five are organized according to the equations and the basic PDE's are introduced in an easy to understand manner. They include the first-order equations and the three fundamental second-order equations, i.e. the heat, wave and Laplace equations. Through these equations we learn the types of problems, how we pose the problems, and the methods of solutions such as the separation of variables and the method of characteristics. The modeling aspects are explained as well. The methods introduced in earlier chapters are developed further in Chapters Six to Twelve. They include the Fourier series, the Fourier and the Laplace transforms, and the Green's functions. The equations in higher dimensions are also discussed in detail. This volume is application-oriented and rich in examples. Going thr...

Solid state nuclear track detection principles, methods and applications

CERN Document Server

Durrani, S A; ter Haar, D

1987-01-01

Solid State Nuclear Track Detection: Principles, Methods and Applications is the second book written by the authors after Nuclear Tracks in Solids: Principles and Applications. The book is meant as an introduction to the subject solid state of nuclear track detection. The text covers the interactions of charged particles with matter; the nature of the charged-particle track; the methodology and geometry of track etching; thermal fading of latent damage trails on tracks; the use of dielectric track recorders in particle identification; radiation dossimetry; and solid state nuclear track detecti

Forensic linguistics: Applications of forensic linguistics methods to anonymous letters

OpenAIRE

NOVÁKOVÁ, Veronika

2011-01-01

The title of my bachelor work is ?Forensic linguistics: Applications of forensic linguistics methods to anonymous letters?. Forensic linguistics is young and not very known branch of applied linguistics. This bachelor work wants to introduce forensic linguistics and its method. The bachelor work has two parts ? theory and practice. The theoretical part informs about forensic linguistics in general. Its two basic aspects utilized in forensic science and respective methods. The practical part t...

40 CFR 425.03 - Sulfide analytical methods and applicability.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Sulfide analytical methods and applicability. 425.03 Section 425.03 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS LEATHER TANNING AND FINISHING POINT SOURCE CATEGORY General Provisions...

Application of computational aerodynamics methods to the design and analysis of transport aircraft

Science.gov (United States)

Da Costa, A. L.

1978-01-01

The application and validation of several computational aerodynamic methods in the design and analysis of transport aircraft is established. An assessment is made concerning more recently developed methods that solve three-dimensional transonic flow and boundary layers on wings. Capabilities of subsonic aerodynamic methods are demonstrated by several design and analysis efforts. Among the examples cited are the B747 Space Shuttle Carrier Aircraft analysis, nacelle integration for transport aircraft, and winglet optimization. The accuracy and applicability of a new three-dimensional viscous transonic method is demonstrated by comparison of computed results to experimental data

A process for application of ATHEANA - a new HRA method

International Nuclear Information System (INIS)

Parry, G.W.; Bley, D.C.; Cooper, S.E.

1996-01-01

This paper describes the analytical process for the application of ATHEANA, a new approach to the performance of human reliability analysis as part of a PRA. This new method, unlike existing methods, is based upon an understanding of the reasons why people make errors, and was developed primarily to address the analysis of errors of commission

Mathematical methods and supercomputing in nuclear applications. Proceedings. Vol. 2

International Nuclear Information System (INIS)

Kuesters, H.; Stein, E.; Werner, W.

1993-04-01

All papers of the two volumes are separately indexed in the data base. Main topics are: Progress in advanced numerical techniques, fluid mechanics, on-line systems, artificial intelligence applications, nodal methods reactor kinetics, reactor design, supercomputer architecture, probabilistic estimation of risk assessment, methods in transport theory, advances in Monte Carlo techniques, and man-machine interface. (orig.)

Mathematical methods and supercomputing in nuclear applications. Proceedings. Vol. 1

International Nuclear Information System (INIS)

Kuesters, H.; Stein, E.; Werner, W.

1993-04-01

All papers of the two volumes are separately indexed in the data base. Main topics are: Progress in advanced numerical techniques, fluid mechanics, on-line systems, artificial intelligence applications, nodal methods reactor kinetics, reactor design, supercomputer architecture, probabilistic estimation of risk assessment, methods in transport theory, advances in Monte Carlo techniques, and man-machine interface. (orig.)

Investigations on application of multigrid method to MHD equilibrium analysis

International Nuclear Information System (INIS)

Ikuno, Soichiro

2000-01-01

The potentiality of application for Multi-grid method to MHD equilibrium analysis is investigated. The nonlinear eigenvalue problem often appears when the MHD equilibria are determined by solving the Grad-Shafranov equation numerically. After linearization of the equation, the problem is solved by use of the iterative method. Although the Red-Black SOR method or Gauss-Seidel method is often used for the solution of the linearized equation, it takes much CPU time to solve the problem. The Multi-grid method is compared with the SOR method for the Poisson Problem. The results of computations show that the CPU time required for the Multi-grid method is about 1000 times as small as that for the SOR method. (author)

Research on the Applicable Method of Valuation of Pure Electric Used vehicles

Science.gov (United States)

Cai, yun; Tan, zhengping; Wang, yidong; Mao, pan

2018-03-01

With the rapid growth in the ownership of pure electric vehicles, the research on the valuation of used electric vehicles has become the key to the development of the pure electric used vehicle market. The paper analyzed the application of the three value assessment methods, current market price method, capitalized earning method and replacement cost method, in pure electric used vehicles, and draws a conclusion that the replacement cost method is more suitable for pure electric used car. At the same time, the article also conducted a parametric correction exploration research, aiming at the characteristics of pure electric vehicles and replacement cost of the constituent factors. Through the analysis of the applicability parameters of physical devaluation, functional devaluation and economic devaluation, the revised replacement cost method can be used for the valuation of purely used electric vehicles for private use.

Application of radioisotope methods of investigation and control techniques in tube production

International Nuclear Information System (INIS)

Chizh, V.A.; Drabkin, L.A.

1975-01-01

Various spheres of radioactive isotopes application of closed and open type in tube production are described. Due to the usage of radioactive indicator method in combination with physicochemical methods and metallography new data are obtained in the theory and practice of tube centrifugal casting, rolling and pressing. Adsorption properties of lubricants and element distribution in the joint weld region of the big diameter tubes are investigated. The application of radioactive isotopes as ionizing radiation source made it possible to develop some radioisotope methods and instruments for tube wall thickness and the wall thickness difference control. Short characteristics of such instruments are given

Methods of PCM microcapsules application and the thermal properties of modified knitted fabric

Energy Technology Data Exchange (ETDEWEB)

Nejman, Alicja, E-mail: anejman@iw.lodz.pl [Textile Research Institute, Scientific Department of Unconventional Technologies and Textiles, 5/15 Brzezinska St., 92-103 Lodz (Poland); Cieślak, Małgorzata [Textile Research Institute, Scientific Department of Unconventional Technologies and Textiles, 5/15 Brzezinska St., 92-103 Lodz (Poland); Gajdzicki, Bogumił [Textile Research Institute, Scientific Department of Textile Chemistry and Products Modification, 5/15 Brzezinska St., 92-103 Lodz (Poland); Goetzendorf-Grabowska, Bogna; Karaszewska, Agnieszka [Textile Research Institute, Scientific Department of Unconventional Technologies and Textiles, 5/15 Brzezinska St., 92-103 Lodz (Poland)

2014-08-10

Highlights: • We applied microcapsules containing n-octadecane for the modification of knitted fabric. • We used printing, coating and padding techniques for the application of microcapsules. • M-PCM application methods allow to regulate the thermal properties of textiles. • M-PCM application methods allow to regulate the air permeability properties of textiles. - Abstract: The aim of the study is to analyze the impact of application methods of microcapsules containing n-octadecane as phase change materials (M-PCM) on the thermal properties and air permeability of modified textile fabric. Polyester knitted fabric, printing, coating and padding methods and polymer pastes with 20 wt.% of M-PCM were used. For the assessment of modification effects the differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were used. DSC analysis showed that the highest enthalpy of phase transitions has printed fabric and the lowest padded fabric. The widest range of phase transitions temperatures was observed for printed fabric, slightly narrower for coated fabric and the narrowest for padded fabric. SEM analysis showed differences in the morphology of modified fabrics depending on incorporation techniques, which are compatible with differences in air permeability results. M-PCM application techniques allow to regulate the thermal and air permeability properties of fabric.

Methods of PCM microcapsules application and the thermal properties of modified knitted fabric

International Nuclear Information System (INIS)

Nejman, Alicja; Cieślak, Małgorzata; Gajdzicki, Bogumił; Goetzendorf-Grabowska, Bogna; Karaszewska, Agnieszka

2014-01-01

Highlights: • We applied microcapsules containing n-octadecane for the modification of knitted fabric. • We used printing, coating and padding techniques for the application of microcapsules. • M-PCM application methods allow to regulate the thermal properties of textiles. • M-PCM application methods allow to regulate the air permeability properties of textiles. - Abstract: The aim of the study is to analyze the impact of application methods of microcapsules containing n-octadecane as phase change materials (M-PCM) on the thermal properties and air permeability of modified textile fabric. Polyester knitted fabric, printing, coating and padding methods and polymer pastes with 20 wt.% of M-PCM were used. For the assessment of modification effects the differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were used. DSC analysis showed that the highest enthalpy of phase transitions has printed fabric and the lowest padded fabric. The widest range of phase transitions temperatures was observed for printed fabric, slightly narrower for coated fabric and the narrowest for padded fabric. SEM analysis showed differences in the morphology of modified fabrics depending on incorporation techniques, which are compatible with differences in air permeability results. M-PCM application techniques allow to regulate the thermal and air permeability properties of fabric

Mechanomyographic Parameter Extraction Methods: An Appraisal for Clinical Applications

Directory of Open Access Journals (Sweden)

Morufu Olusola Ibitoye

2014-12-01

Full Text Available The research conducted in the last three decades has collectively demonstrated that the skeletal muscle performance can be alternatively assessed by mechanomyographic signal (MMG parameters. Indices of muscle performance, not limited to force, power, work, endurance and the related physiological processes underlying muscle activities during contraction have been evaluated in the light of the signal features. As a non-stationary signal that reflects several distinctive patterns of muscle actions, the illustrations obtained from the literature support the reliability of MMG in the analysis of muscles under voluntary and stimulus evoked contractions. An appraisal of the standard practice including the measurement theories of the methods used to extract parameters of the signal is vital to the application of the signal during experimental and clinical practices, especially in areas where electromyograms are contraindicated or have limited application. As we highlight the underpinning technical guidelines and domains where each method is well-suited, the limitations of the methods are also presented to position the state of the art in MMG parameters extraction, thus providing the theoretical framework for improvement on the current practices to widen the opportunity for new insights and discoveries. Since the signal modality has not been widely deployed due partly to the limited information extractable from the signals when compared with other classical techniques used to assess muscle performance, this survey is particularly relevant to the projected future of MMG applications in the realm of musculoskeletal assessments and in the real time detection of muscle activity.

The spherical harmonics method, II (application to problems with plane and spherical symmetry)

Energy Technology Data Exchange (ETDEWEB)

Mark, C

1958-12-15

The application of the spherical harmonic method to problems with plane or spherical symmetry is discussed in detail. The numerical results of some applications already made are included to indicate the degree of convergence obtained. Formulae for dealing with distributions of isotropic sources are developed. Tables useful in applying the method are given in Section 11. (author)

Pseudo-harmonics method: an application to thermal reactors

International Nuclear Information System (INIS)

Silva, F.C. da; Rotenberg, S.; Thome Filho, Z.D.

1985-10-01

Several applications of the Pseudo-Harmonics method are presented, aiming to calculate the neutron flux and the perturbed eigenvalue of a nuclear reactor, like PWR, with three enrichment regions as Angra-1 reactor. In the reference reactor, perturbations of several types as global as local were simulated. The results were compared with those from the direct calculation. (E.G.) [pt

Construction of crystal structure prototype database: methods and applications.

Science.gov (United States)

Su, Chuanxun; Lv, Jian; Li, Quan; Wang, Hui; Zhang, Lijun; Wang, Yanchao; Ma, Yanming

2017-04-26

Crystal structure prototype data have become a useful source of information for materials discovery in the fields of crystallography, chemistry, physics, and materials science. This work reports the development of a robust and efficient method for assessing the similarity of structures on the basis of their interatomic distances. Using this method, we proposed a simple and unambiguous definition of crystal structure prototype based on hierarchical clustering theory, and constructed the crystal structure prototype database (CSPD) by filtering the known crystallographic structures in a database. With similar method, a program structure prototype analysis package (SPAP) was developed to remove similar structures in CALYPSO prediction results and extract predicted low energy structures for a separate theoretical structure database. A series of statistics describing the distribution of crystal structure prototypes in the CSPD was compiled to provide an important insight for structure prediction and high-throughput calculations. Illustrative examples of the application of the proposed database are given, including the generation of initial structures for structure prediction and determination of the prototype structure in databases. These examples demonstrate the CSPD to be a generally applicable and useful tool for materials discovery.

Construction of crystal structure prototype database: methods and applications

International Nuclear Information System (INIS)

Su, Chuanxun; Lv, Jian; Wang, Hui; Wang, Yanchao; Ma, Yanming; Li, Quan; Zhang, Lijun

2017-01-01

Crystal structure prototype data have become a useful source of information for materials discovery in the fields of crystallography, chemistry, physics, and materials science. This work reports the development of a robust and efficient method for assessing the similarity of structures on the basis of their interatomic distances. Using this method, we proposed a simple and unambiguous definition of crystal structure prototype based on hierarchical clustering theory, and constructed the crystal structure prototype database (CSPD) by filtering the known crystallographic structures in a database. With similar method, a program structure prototype analysis package (SPAP) was developed to remove similar structures in CALYPSO prediction results and extract predicted low energy structures for a separate theoretical structure database. A series of statistics describing the distribution of crystal structure prototypes in the CSPD was compiled to provide an important insight for structure prediction and high-throughput calculations. Illustrative examples of the application of the proposed database are given, including the generation of initial structures for structure prediction and determination of the prototype structure in databases. These examples demonstrate the CSPD to be a generally applicable and useful tool for materials discovery. (paper)

Application of the conjugate-gradient method to ground-water models

Science.gov (United States)

Manteuffel, T.A.; Grove, D.B.; Konikow, Leonard F.

1984-01-01

The conjugate-gradient method can solve efficiently and accurately finite-difference approximations to the ground-water flow equation. An aquifer-simulation model using the conjugate-gradient method was applied to a problem of ground-water flow in an alluvial aquifer at the Rocky Mountain Arsenal, Denver, Colorado. For this application, the accuracy and efficiency of the conjugate-gradient method compared favorably with other available methods for steady-state flow. However, its efficiency relative to other available methods depends on the nature of the specific problem. The main advantage of the conjugate-gradient method is that it does not require the use of iteration parameters, thereby eliminating this partly subjective procedure. (USGS)

Application of the finite element method to the neutron transport equation

International Nuclear Information System (INIS)

Martin, W.R.

1976-01-01

This paper examines the theoretical and practical application of the finite element method to the neutron transport equation. It is shown that in principle the system of equations obtained by application of the finite element method can be solved with certain physical restrictions concerning the criticality of the medium. The convergence of this approximate solution to the exact solution with mesh refinement is examined, and a non-optical estimate of the convergence rate is obtained analytically. It is noted that the numerical results indicate a faster convergence rate and several approaches to obtain this result analytically are outlined. The practical application of the finite element method involved the development of a computer code capable of solving the neutron transport equation in 1-D plane geometry. Vacuum, reflecting, or specified incoming boundary conditions may be analyzed, and all are treated as natural boundary conditions. The time-dependent transport equation is also examined and it is shown that the application of the finite element method in conjunction with the Crank-Nicholson time discretization method results in a system of algebraic equations which is readily solved. Numerical results are given for several critical slab eigenvalue problems, including anisotropic scattering, and the results compare extremely well with benchmark results. It is seen that the finite element code is more efficient than a standard discrete ordinates code for certain problems. A problem with severe heterogeneities is considered and it is shown that the use of discontinuous spatial and angular elements results in a marked improvement in the results. Finally, time-dependent problems are examined and it is seen that the phenomenon of angular mode separation makes the numerical treatment of the transport equation in slab geometry a considerable challenge, with the result that the angular mesh has a dominant effect on obtaining acceptable solutions

Advances in product family and product platform design methods & applications

CERN Document Server

Jiao, Jianxin; Siddique, Zahed; Hölttä-Otto, Katja

2014-01-01

Advances in Product Family and Product Platform Design: Methods & Applications highlights recent advances that have been made to support product family and product platform design and successful applications in industry. This book provides not only motivation for product family and product platform design—the “why” and “when” of platforming—but also methods and tools to support the design and development of families of products based on shared platforms—the “what”, “how”, and “where” of platforming. It begins with an overview of recent product family design research to introduce readers to the breadth of the topic and progresses to more detailed topics and design theory to help designers, engineers, and project managers plan, architect, and implement platform-based product development strategies in their companies. This book also: Presents state-of-the-art methods and tools for product family and product platform design Adopts an integrated, systems view on product family and pro...

Nuclear methods: applications to Earth sciences

International Nuclear Information System (INIS)

Segovia, N.

1994-01-01

The discovery of radioactivity phenomenon occurred almost 100 years ago, in 1896, and constituted the base for new perspectives in many disciplines, including the Earth sciences. The initial works in this field, during the first quarter of the Century, established that the series of radioactive decay of long lifetime Uranium 238, Uranium 235 and Thorium 232 present radioactive isotopes of several elements which are physically and chemically different. The chemical differentiation of the Earth during its evolution has concentrated in the crust the major part of the radioactive materials. The application of radioactive in balance which occur as a consequence of chemical and physical differences, has evolve quickly, and the utilization of natural radioactive isotopes can be detach in two major headings: geologic clocks and tracers. The applications cover a wide spectra of geological, oceanographical, volcanic, hydrological, paleoclimatic and archaeological problems. In this paper, a description of radioactive phenomenon is presented, as well as the chemical and physical properties of the natural radioactive elements, the measurement methods and, finally, some examples of the uses in chronology and as radioactive tracers will be presented, doing an emphasis of some results obtained in Mexico. (Author)

Principles of Vibrational Spectroscopic Methods and their Application to Bioanalysis

DEFF Research Database (Denmark)

Moore, David S.; Jepsen, Peter Uhd; Volka, Karel

2014-01-01

imaging, fiber optic probes for in vivo and in vitro analysis, and methods to obtain depth profile information. The issue of fluorescence interference will be considered from the perspectives of excitation wavelength selection and data treatment. Methods to optimize signal to noise with minimized...... excitation laser irradiance to avoid sample damage are also discussed. This chapter then reviews applications of Raman spectroscopy to bioanalysis. Areas discussed include pathology, cytopathology, single-cell analysis, in vivo and in vitro tissue characterization, chemical composition of cell components...... as conformation of DNA and proteins), vibrations of inter- and intramolecular hydrogen bonds in solid-state materials, as well as picosecond dynamics in liquid solutions. This chapter reviews modern instrumentation and techniques for THz spectroscopy, with emphasis on applications in bioanalysis....

Efficient color correction method for smartphone camera-based health monitoring application.

Science.gov (United States)

Duc Dang; Chae Ho Cho; Daeik Kim; Oh Seok Kwon; Jo Woon Chong

2017-07-01

Smartphone health monitoring applications are recently highlighted due to the rapid development of hardware and software performance of smartphones. However, color characteristics of images captured by different smartphone models are dissimilar each other and this difference may give non-identical health monitoring results when the smartphone health monitoring applications monitor physiological information using their embedded smartphone cameras. In this paper, we investigate the differences in color properties of the captured images from different smartphone models and apply a color correction method to adjust dissimilar color values obtained from different smartphone cameras. Experimental results show that the color corrected images using the correction method provide much smaller color intensity errors compared to the images without correction. These results can be applied to enhance the consistency of smartphone camera-based health monitoring applications by reducing color intensity errors among the images obtained from different smartphones.

Drug-Target Interactions: Prediction Methods and Applications.

Science.gov (United States)

Anusuya, Shanmugam; Kesherwani, Manish; Priya, K Vishnu; Vimala, Antonydhason; Shanmugam, Gnanendra; Velmurugan, Devadasan; Gromiha, M Michael

2018-01-01

Identifying the interactions between drugs and target proteins is a key step in drug discovery. This not only aids to understand the disease mechanism, but also helps to identify unexpected therapeutic activity or adverse side effects of drugs. Hence, drug-target interaction prediction becomes an essential tool in the field of drug repurposing. The availability of heterogeneous biological data on known drug-target interactions enabled many researchers to develop various computational methods to decipher unknown drug-target interactions. This review provides an overview on these computational methods for predicting drug-target interactions along with available webservers and databases for drug-target interactions. Further, the applicability of drug-target interactions in various diseases for identifying lead compounds has been outlined. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Application of Electrokinetic Stabilisation (EKS) Method for Soft Soil: A Review

Science.gov (United States)

Azhar, ATS; Azim, MAM; Syakeera, NN; Jefferson, IF; Rogers, CDF

2017-08-01

Soil properties such as low shear strength, excessive compression, collapsing behavior, high swell potential are some of the undesirable properties of soils in geotechnical engineering and those properties would cause severe distress to the structures. To solve these, an innovative stabilization of Electrokinetic (EKS) has been introduced. Electrokinetic is an applicable technique to transport charged particles and fluid in an electric potential. The EKS demonstrates changes in soil pH due to electrolysis reactions, water flow between the electrodes and migration of ions towards the cathode. This treatment has proven its efficiency in consolidating organic, peat and clayey silt as well as less expensive than other methods. Otherwise, this method also gives advantage by not disturbing site. The primary objective of this review is to discuss the application of electrokinetic and to investigate the current knowledge of electrokinetic in geotechnical application through a literature search and review, including consideration of certain aspects related to the soft soil application that may be relevant to the future study and at the same time addressing some key issues and their implications on soil behaviors.

Application of Cocktail method in vegetation classification

Directory of Open Access Journals (Sweden)

Hamed Asadi

2016-09-01

Full Text Available This study intends to assess the application of Cocktail method in the classification of large vegetation databases. For this purpose, Buxus hyrcana dataset consisted of 442 relevés with 89 species were used and by the modified TWINSPAN. For running the Cocktail method, first primarily classification was done by modified TWINSPAN, and by performing phi analysis in the groups resulted five species were selected which had the highest fidelity value. Then sociological species groups were formed by examining co-occurrence of these 5 species with other species in the database. 21 plant communities belongs to 6 variant, 17 sub associations, 11 associations, 4 alliance, 1 order and 1 class were recognized by assigning 379 releves to the sociological species groups by using logical formulas. Also, 63 releves by the logical formula were not assigned to any sociological species groups, by FPFI index were assigned to the sociological species groups which had the most index value. According to 91% classification agreement with Brown-Blanquet classification and Cocktail classification, we suggest Cocktail method to vegetation scientists as an efficient alternative of Braun-Blanquet method to classify large vegetation databases.

Trends in HFE Methods and Tools and Their Applicability to Safety Reviews

Energy Technology Data Exchange (ETDEWEB)

O' Hara, J.M.; Plott, C.; Milanski, J.; Ronan, A.; Scheff, S.; Laux, L.; and Bzostek, J.

2009-09-30

The U.S. Nuclear Regulatory Commission's (NRC) conducts human factors engineering (HFE) safety reviews of applicant submittals for new plants and for changes to existing plants. The reviews include the evaluation of the methods and tools (M&T) used by applicants as part of their HFE program. The technology used to perform HFE activities has been rapidly evolving, resulting in a whole new generation of HFE M&Ts. The objectives of this research were to identify the current trends in HFE methods and tools, determine their applicability to NRC safety reviews, and identify topics for which the NRC may need additional guidance to support the NRC's safety reviews. We conducted a survey that identified over 100 new HFE M&Ts. The M&Ts were assessed to identify general trends. Seven trends were identified: Computer Applications for Performing Traditional Analyses, Computer-Aided Design, Integration of HFE Methods and Tools, Rapid Development Engineering, Analysis of Cognitive Tasks, Use of Virtual Environments and Visualizations, and Application of Human Performance Models. We assessed each trend to determine its applicability to the NRC's review by considering (1) whether the nuclear industry is making use of M&Ts for each trend, and (2) whether M&Ts reflecting the trend can be reviewed using the current design review guidance. We concluded that M&T trends that are applicable to the commercial nuclear industry and are expected to impact safety reviews may be considered for review guidance development. Three trends fell into this category: Analysis of Cognitive Tasks, Use of Virtual Environments and Visualizations, and Application of Human Performance Models. The other trends do not need to be addressed at this time.

Trends in HFE Methods and Tools and Their Applicability to Safety Reviews

International Nuclear Information System (INIS)

O'Hara, J.M.; Plott, C.; Milanski, J.; Ronan, A.; Scheff, S.; Laux, L.; Bzostek, J.

2009-01-01

The U.S. Nuclear Regulatory Commission's (NRC) conducts human factors engineering (HFE) safety reviews of applicant submittals for new plants and for changes to existing plants. The reviews include the evaluation of the methods and tools (M and T) used by applicants as part of their HFE program. The technology used to perform HFE activities has been rapidly evolving, resulting in a whole new generation of HFE M and Ts. The objectives of this research were to identify the current trends in HFE methods and tools, determine their applicability to NRC safety reviews, and identify topics for which the NRC may need additional guidance to support the NRC's safety reviews. We conducted a survey that identified over 100 new HFE M and Ts. The M and Ts were assessed to identify general trends. Seven trends were identified: Computer Applications for Performing Traditional Analyses, Computer-Aided Design, Integration of HFE Methods and Tools, Rapid Development Engineering, Analysis of Cognitive Tasks, Use of Virtual Environments and Visualizations, and Application of Human Performance Models. We assessed each trend to determine its applicability to the NRC's review by considering (1) whether the nuclear industry is making use of M and Ts for each trend, and (2) whether M and Ts reflecting the trend can be reviewed using the current design review guidance. We concluded that M and T trends that are applicable to the commercial nuclear industry and are expected to impact safety reviews may be considered for review guidance development. Three trends fell into this category: Analysis of Cognitive Tasks, Use of Virtual Environments and Visualizations, and Application of Human Performance Models. The other trends do not need to be addressed at this time.

Delayless acceleration measurement method for motion control applications

Energy Technology Data Exchange (ETDEWEB)

Vaeliviita, S.; Ovaska, S.J. [Helsinki University of Technology, Otaniemi (Finland). Institute of Intelligent Power Electronics

1997-12-31

Delayless and accurate sensing of angular acceleration can improve the performance of motion control in motor drives. Acceleration control is, however, seldom implemented in practical drive systems due to prohibitively high costs or unsatisfactory results of most acceleration measurement methods. In this paper we propose an efficient and accurate acceleration measurement method based on direct differentiation of the corresponding velocity signal. Polynomial predictive filtering is used to smooth the resulting noisy signal without delay. This type of prediction is justified by noticing that a low-degree polynomial can usually be fitted into the primary acceleration curve. No additional hardware is required to implement the procedure if the velocity signal is already available. The performance of the acceleration measurement method is evaluated by applying it to a demanding motion control application. (orig.) 12 refs.

Application of multi-block methods in cement production

DEFF Research Database (Denmark)

Svinning, K.; Høskuldsson, Agnar

2008-01-01

distribution and the two last blocks the superficial microstructure analysed by differential thermo gravimetric analysis. The multi-block method is used to identify the role of each part. The score vectors of each block can be analysed separately or together with score vectors of other blocks. Stepwise......Compressive strength at 1 day of Portland cement as a function of the microstructure of cement was statistically modelled by application of multi-block regression method. The observation X-matrix was partitioned into four blocks, the first block representing the mineralogy, the second particle size...... regression is used to find minimum number of variables of each block. The multi-block method proved useful in determining the modelling strength of each data block and finding minimum number of variables within each data block....

A Method of Signal Scrambling to Secure Data Storage for Healthcare Applications.

Science.gov (United States)

Bao, Shu-Di; Chen, Meng; Yang, Guang-Zhong

2017-11-01

A body sensor network that consists of wearable and/or implantable biosensors has been an important front-end for collecting personal health records. It is expected that the full integration of outside-hospital personal health information and hospital electronic health records will further promote preventative health services as well as global health. However, the integration and sharing of health information is bound to bring with it security and privacy issues. With extensive development of healthcare applications, security and privacy issues are becoming increasingly important. This paper addresses the potential security risks of healthcare data in Internet-based applications and proposes a method of signal scrambling as an add-on security mechanism in the application layer for a variety of healthcare information, where a piece of tiny data is used to scramble healthcare records. The former is kept locally and the latter, along with security protection, is sent for cloud storage. The tiny data can be derived from a random number generator or even a piece of healthcare data, which makes the method more flexible. The computational complexity and security performance in terms of theoretical and experimental analysis has been investigated to demonstrate the efficiency and effectiveness of the proposed method. The proposed method is applicable to all kinds of data that require extra security protection within complex networks.

Application of methods of discrete mathematics at modular synthesis of mechatronic devices

OpenAIRE

Nikiforov, S.; Nikiforov, B.; Mandarov, E.; Rabdanova, N.

2010-01-01

The article is devoted to application of methods of discrete mathematics (the theory of counts, the method of matrix code and others) and synthesis of executive mechanisms of mechatronic handling devices

Spinal Tissue Loading Created by Different Methods of Spinal Manipulative Therapy Application.

Science.gov (United States)

Funabashi, Martha; Nougarou, François; Descarreaux, Martin; Prasad, Narasimha; Kawchuk, Gregory N

2017-05-01

Comparative study using robotic replication of spinal manipulative therapy (SMT) vertebral kinematics together with serial dissection. The aim of this study was to quantify loads created in cadaveric spinal tissues arising from three different forms of SMT application. There exist many distinct methods by which to apply SMT. It is not known presently whether different forms of SMT application have different effects on spinal tissues. Should the method of SMT application modulate spinal tissue loading, quantifying this relation may help explain the varied outcomes of SMT in terms of effect and safety. SMT was applied to the third lumbar vertebra in 12 porcine cadavers using three SMT techniques: a clinical device that applies forces through a hand-held instrument (INST), a manual technique of applying SMT clinically (MAN) and a research device that applies parameters of manual SMT through a servo-controlled linear actuator motor (SERVO). The resulting kinematics from each SMT application were tracked optically via indwelling bone pins. The L3/L4 segment was then removed, mounted in a parallel robot and the resulting kinematics from SMT replayed for each SMT application technique. Serial dissection of spinal structures was conducted to quantify loading characteristics of discrete spinal tissues. In terms of load magnitude, SMT application with MAN and SERVO created greater forces than INST in all conditions (P < 0.05). Additionally, MAN and SERVO created comparable posterior forces in the intact specimen, but MAN created greater posterior forces on IVD structures compared to SERVO (P < 0.05). Specific methods of SMT application create unique vertebral loading characteristics, which may help explain the varied outcomes of SMT in terms of effect and safety. N/A.

Application of autoradiography methods for solving problems of microelectronics

International Nuclear Information System (INIS)

Frejer, K.; Trojtler, Kh.-Kh.; Birkgol'ts, V.

1979-01-01

Methods of contact autoradiography with halogen-silver emulsions and autoradiography, caused by the interaction of neutrons with solid track detectors, are successfully used for determination of lateral and longitudal distributions of matter in the basic semiconductor material as well as in the frameworks of its preparation. Possibilities for application and power parameters of some autoradiographic methods related to sensitivity of detection and local resolution are considered on the example of the basic material - silicon. In this case, special attention was paid on investigation of elements combibation, for example: boron/phosphorus as well as on the methods of correlation of solid track and halogen-silver autoradiogrammes [ru

Application of the IPEBS method to dynamic contingency analysis

Energy Technology Data Exchange (ETDEWEB)

Martins, A C.B. [FURNAS, Rio de Janeiro, RJ (Brazil); Pedroso, A S [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil)

1994-12-31

Dynamic contingency analysis is certainly a demanding task in the context of dynamic performance evaluation. This paper presents the results of a test for checking the contingency screening capability of the IPEBS method. A brazilian 1100-bus, 112-gen system was used in the test; the ranking of the contingencies based on critical clearing times obtained with IPEBS, was compared with the ranking derived from detailed time-domain simulation. The results of this comparison encourages us to recommended the use of the method in industry applications, in a complementary basis to the current method of time domain simulation. (author) 5 refs., 1 fig., 2 tabs.

CSM research: Methods and application studies

Science.gov (United States)

Knight, Norman F., Jr.

1989-01-01

Computational mechanics is that discipline of applied science and engineering devoted to the study of physical phenomena by means of computational methods based on mathematical modeling and simulation, utilizing digital computers. The discipline combines theoretical and applied mechanics, approximation theory, numerical analysis, and computer science. Computational mechanics has had a major impact on engineering analysis and design. When applied to structural mechanics, the discipline is referred to herein as computational structural mechanics. Complex structures being considered by NASA for the 1990's include composite primary aircraft structures and the space station. These structures will be much more difficult to analyze than today's structures and necessitate a major upgrade in computerized structural analysis technology. NASA has initiated a research activity in structural analysis called Computational Structural Mechanics (CSM). The broad objective of the CSM activity is to develop advanced structural analysis technology that will exploit modern and emerging computers, such as those with vector and/or parallel processing capabilities. Here, the current research directions for the Methods and Application Studies Team of the Langley CSM activity are described.

Application of the k0-NAA method at the HANARO research reactor

International Nuclear Information System (INIS)

Jong-Hwa Moon; Sun-Ha Kim; Yong-Sam Chung; Young-Jin Kim

2007-01-01

The k 0 -standardization method (k 0 -NAA) is known as one of the most remarkable progresses of the NAA with its many advantages. For the application of k 0 -NAA method at the NAA 1 irradiation position where the neutrons are well thermalized in the HANARO research reactor, KAERI, Korea, the determination of the reactor neutron spectrum parameters such as α and f have been carried out. The measured values of a and f using the 'Cd-ratio' triple monitor method were 0.127±0.022 and 1010±70, respectively. To evaluate the applicability of k 0 -NAA in our analytical system, the analysis of three kinds of SRMs was executed. The analytical results showed that the relative error of most of the elements was less than 10% and the U-scores were within 2. It is turned out that the procedure of the k 0 -NAA in the HANARO research reactor is available for a practical application in the environmental fields. (author)

Exergy analysis of heating, refrigerating and air conditioning methods and applications

CERN Document Server

Dincer, Ibrahim

2015-01-01

Improve and optimize efficiency of HVAC and related energy systems from an exergy perspective. From fundamentals to advanced applications, Exergy Analysis of Heating, Air Conditioning, and Refrigeration provides readers with a clear and concise description of exergy analysis and its many uses. Focusing on the application of exergy methods to the primary technologies for heating, refrigerating, and air conditioning, Ibrahim Dincer and Marc A. Rosen demonstrate exactly how exergy can help improve and optimize efficiency, environmental performance, and cost-effectiveness. The book also discusses the analysis tools available, and includes many comprehensive case studies on current and emerging systems and technologies for real-world examples. From introducing exergy and thermodynamic fundamentals to presenting the use of exergy methods for heating, refrigeration, and air conditioning systems, this book equips any researcher or practicing engineer with the tools needed to learn and master the application of exergy...

Applicability of the Galerkin method to the approximate solution of the multigroup diffusion equation

International Nuclear Information System (INIS)

Obradovic, D.

1970-04-01

In the study of the nuclear reactors space-time behaviour the modal analysis is very often used though some basic mathematical problems connected with application of this methods are still unsolved. In this paper the modal analysis is identified as a set of the methods in the mathematical literature known as the Galerkin methods (or projection methods, or sometimes direct methods). Using the results of the mathematical investigations of these methods the applicability of the Galerkin type methods to the calculations of the eigenvalue and eigenvectors of the stationary and non-stationary diffusion operator, as well as for the solutions of the corresponding functional equations, is established (author)

The Advanced Aluminum Nitride Synthesis Methods and Its Applications: Patent Review.

Science.gov (United States)

Shishkin, Roman A; Elagin, Andrey A; Mayorova, Ekaterina S; Beketov, Askold R

2016-01-01

High purity nanosized aluminum nitride synthesis is a current issue for both industry and science. However, there is no up-to-date review considering the major issues and the technical solutions for different methods. This review aims to investigate the advanced methods of aluminum nitride synthesis and its development tendencies. Also the aluminum nitride application patents and prospects for development of the branch have been considered. The patent search on "aluminum nitride synthesis" has been carried out. The research activity has been analyzed. Special attention has been paid to the patenting geography and the leading researchers in aluminum nitride synthesis. Aluminum nitride synthesis methods have been divided into 6 main groups, the most studied approaches are carbothermal reduction (88 patents) and direct nitridation (107 patents). The current issues for each group have been analyzed; the main trends are purification of the final product and nanopowder synthesis. The leading researchers in aluminum nitride synthesis have represented 5 countries, namely: Japan, China, Russia, South Korea and USA. The main aluminum nitride application spheres are electronics (59,1 percent of applications) and new materials manufacturing (30,9 percent). The review deals with the state of the art data in nanosized aluminum nitride synthesis, the major issues and the technical solutions for different synthesis methods. It gives a full understanding of the development tendencies and of the current leaders in the sphere.

Application of radiotracer methods in streamflow measurements

International Nuclear Information System (INIS)

Dincer, T.

1967-01-01

An attempt is made to evaluate methods using radiotracers in streamflow measurements. The basic principles of the tracer method are explained and background information given. Radiotracers used in stream discharge measurements are discussed and measurements made by different research workers are described. Problems such as adsorption of the tracer and the mixing length are discussed and the potential use of the radioisotopes as tracer in the routine stream-gauging work is evaluated. It is concluded that, at the present stage of development, radiotracer methods do not seem to be ready for routine use in stream-gauging work, and can only be used in some special cases. For gamma-emitting radioisotopes there are problems related to safety, transport and injection which should be solved. Tritium, though a very attractive tracer in some respects, has the disadvantages of having a relatively long half-life and of disturbing the natural tritium levels in the region. Finally, an attempt is made to define the objectives of the research in the field of application of radioisotopes in hydrometry. (author)

Application of the Finite Element Method in Atomic and Molecular Physics

Science.gov (United States)

Shertzer, Janine

2007-01-01

The finite element method (FEM) is a numerical algorithm for solving second order differential equations. It has been successfully used to solve many problems in atomic and molecular physics, including bound state and scattering calculations. To illustrate the diversity of the method, we present here details of two applications. First, we calculate the non-adiabatic dipole polarizability of Hi by directly solving the first and second order equations of perturbation theory with FEM. In the second application, we calculate the scattering amplitude for e-H scattering (without partial wave analysis) by reducing the Schrodinger equation to set of integro-differential equations, which are then solved with FEM.

Handbook of Partial Least Squares Concepts, Methods and Applications

CERN Document Server

Vinzi, Vincenzo Esposito; Henseler, Jörg

2010-01-01

This handbook provides a comprehensive overview of Partial Least Squares (PLS) methods with specific reference to their use in marketing and with a discussion of the directions of current research and perspectives. It covers the broad area of PLS methods, from regression to structural equation modeling applications, software and interpretation of results. The handbook serves both as an introduction for those without prior knowledge of PLS and as a comprehensive reference for researchers and practitioners interested in the most recent advances in PLS methodology.

Application of Formal Methods in Software Engineering

Directory of Open Access Journals (Sweden)

Adriana Morales

2011-12-01

Full Text Available The purpose of this research work is to examine: (1 why are necessary the formal methods for software systems today, (2 high integrity systems through the methodology C-by-C –Correctness-by-Construction–, and (3 an affordable methodology to apply formal methods in software engineering. The research process included reviews of the literature through Internet, in publications and presentations in events. Among the Research results found that: (1 there is increasing the dependence that the nations have, the companies and people of software systems, (2 there is growing demand for software Engineering to increase social trust in the software systems, (3 exist methodologies, as C-by-C, that can provide that level of trust, (4 Formal Methods constitute a principle of computer science that can be applied software engineering to perform reliable process in software development, (5 software users have the responsibility to demand reliable software products, and (6 software engineers have the responsibility to develop reliable software products. Furthermore, it is concluded that: (1 it takes more research to identify and analyze other methodologies and tools that provide process to apply the Formal Software Engineering methods, (2 Formal Methods provide an unprecedented ability to increase the trust in the exactitude of the software products and (3 by development of new methodologies and tools is being achieved costs are not more a disadvantage for application of formal methods.

APPLICATION OF THE PERFORMANCE SELECTION INDEX METHOD FOR SOLVING MACHINING MCDM PROBLEMS

Directory of Open Access Journals (Sweden)

Dušan Petković

2017-04-01

Full Text Available Complex nature of machining processes requires the use of different methods and techniques for process optimization. Over the past few years a number of different optimization methods have been proposed for solving continuous machining optimization problems. In manufacturing environment, engineers are also facing a number of discrete machining optimization problems. In order to help decision makers in solving this type of optimization problems a number of multi criteria decision making (MCDM methods have been proposed. This paper introduces the use of an almost unexplored MCDM method, i.e. performance selection index (PSI method for solving machining MCDM problems. The main motivation for using the PSI method is that it is not necessary to determine criteria weights as in other MCDM methods. Applicability and effectiveness of the PSI method have been demonstrated while solving two case studies dealing with machinability of materials and selection of the most suitable cutting fluid for the given machining application. The obtained rankings have good correlation with those derived by the past researchers using other MCDM methods which validate the usefulness of this method for solving machining MCDM problems.

Intelligent numerical methods applications to fractional calculus

CERN Document Server

Anastassiou, George A

2016-01-01

In this monograph the authors present Newton-type, Newton-like and other numerical methods, which involve fractional derivatives and fractional integral operators, for the first time studied in the literature. All for the purpose to solve numerically equations whose associated functions can be also non-differentiable in the ordinary sense. That is among others extending the classical Newton method theory which requires usual differentiability of function. Chapters are self-contained and can be read independently and several advanced courses can be taught out of this book. An extensive list of references is given per chapter. The book’s results are expected to find applications in many areas of applied mathematics, stochastics, computer science and engineering. As such this monograph is suitable for researchers, graduate students, and seminars of the above subjects, also to be in all science and engineering libraries.

The scope of application of incremental rapid prototyping methods in foundry engineering

Directory of Open Access Journals (Sweden)

M. Stankiewicz

2010-01-01

Full Text Available The article presents the scope of application of selected incremental Rapid Prototyping methods in the process of manufacturing casting models, casting moulds and casts. The Rapid Prototyping methods (SL, SLA, FDM, 3DP, JS are predominantly used for the production of models and model sets for casting moulds. The Rapid Tooling methods, such as: ZCast-3DP, ProMetalRCT and VoxelJet, enable the fabrication of casting moulds in the incremental process. The application of the RP methods in cast production makes it possible to speed up the prototype preparation process. This is particularly vital to elements of complex shapes. The time required for the manufacture of the model, the mould and the cast proper may vary from a few to several dozen hours.

APPLICATION OF CHEMICAL METHODS TO THE SOLID WASTE MANAGEMENT

Directory of Open Access Journals (Sweden)

C. P. Bulimaga

2008-12-01

Full Text Available The present article is a synthesis analysis of application of chemical methods for the development of technologies of hazardous waste management. Here are offered some technologies of neutralization of the waste containing hexacyanofferates, galvanic wastes and those with contain of vanadium, which are collected at Power Thermoelectric Plants.

Restricted Kalman Filtering Theory, Methods, and Application

CERN Document Server

Pizzinga, Adrian

2012-01-01

In statistics, the Kalman filter is a mathematical method whose purpose is to use a series of measurements observed over time, containing random variations and other inaccuracies, and produce estimates that tend to be closer to the true unknown values than those that would be based on a single measurement alone. This Brief offers developments on Kalman filtering subject to general linear constraints. There are essentially three types of contributions: new proofs for results already established; new results within the subject; and applications in investment analysis and macroeconomics, where th

Application of differential transformation method for solving dengue transmission mathematical model

Science.gov (United States)

Ndii, Meksianis Z.; Anggriani, Nursanti; Supriatna, Asep K.

2018-03-01

The differential transformation method (DTM) is a semi-analytical numerical technique which depends on Taylor series and has application in many areas including Biomathematics. The aim of this paper is to employ the differential transformation method (DTM) to solve system of non-linear differential equations for dengue transmission mathematical model. Analytical and numerical solutions are determined and the results are compared to that of Runge-Kutta method. We found a good agreement between DTM and Runge-Kutta method.

A survey of direct inversion methods having possible application to tunnel detection

International Nuclear Information System (INIS)

Mager, R.D.

1985-01-01

Within recent years there has been considerable interest in the development of geophysical methods for the location of hidden underground tunnels and cavities. Consideration of this problem has been motivated by military applications, such as the detection of shallow man-made tunnels and arm caches, as well as civilian applications such as detection of limestone cavities in karst terrain and the mapping of abandoned mine workings. There are also applications for in-situ coal gasification and for the monitoring of nuclear waste disposal sites. The most reliable method presently used to map these underground anomalies has been direct detection by closely spaced drilling. However, the high cost of drilling renders this method impractical except for detailed and localized mapping, and certainly unfeasible for any type of broad-scale reconnaissance activity. Largely motivated by petroleum and mineral exploration needs, however, the seismic industry has seen a virtual revolution in acquisition and processing techniques within the past ten years. Paralleling these developments have been corresponding developments in acoustical imaging and non-destructive testing. Researchers in the field of inverse scattering have produced a number of new methods for target imaging from backscattered reflection data

A Comparison of Iterative 2D-3D Pose Estimation Methods for Real-Time Applications

DEFF Research Database (Denmark)

Grest, Daniel; Krüger, Volker; Petersen, Thomas

2009-01-01

This work compares iterative 2D-3D Pose Estimation methods for use in real-time applications. The compared methods are available for public as C++ code. One method is part of the openCV library, namely POSIT. Because POSIT is not applicable for planar 3Dpoint congurations, we include the planar P...

Uniform distribution and quasi-Monte Carlo methods discrepancy, integration and applications

CERN Document Server

Kritzer, Peter; Pillichshammer, Friedrich; Winterhof, Arne

2014-01-01

The survey articles in this book focus on number theoretic point constructions, uniform distribution theory, and quasi-Monte Carlo methods. As deterministic versions of the Monte Carlo method, quasi-Monte Carlo rules enjoy increasing popularity, with many fruitful applications in mathematical practice, as for example in finance, computer graphics, and biology.

Application of radioanalytical methods in the quantification of solute transport in plants

International Nuclear Information System (INIS)

Hornik, M.

2016-01-01

The present habilitation thesis is elaborated as a compilation of published scientific papers supplemented with a commentary. The primary objective of the work was to bring the results and knowledge applicable to the further development of application possibilities of nuclear analytical chemistry, especially in the field of radioindication methods and application of positron emitters in connection with the positron emission tomography (PET) as well. In the work, these methods and techniques are developed mainly in the context of the solution of environmental issues related to the analysis and remediation of contaminated or degraded environment (water and soil), but also partially in the field of plant production or plant research. In terms of the achieved results and knowledge, the work is divided into three separated sections. The first part is dedicated to the application of radioindication methods, as well as others, non-radioanalytical methods and approaches in the characterization of plant biomass (biomass of terrestrial and aquatic mosses, and waste plant biomass) as alternative sorbents served to the separation and removal of (radio)toxic metals from contaminated or waste waters, as well as in the quantification and description of the sorption processes proceed under conditions of batch or continuous flow systems. The second part describes the results concerning on the quantification and visual description of the processes of (radio)toxic metals and microelements uptake and translocation in plant tissues using radioisotopes (β- and γ-emitters) of these metals and application of the methods of direct gamma spectrometry and autoradiography as well. The main aim of these experiments was to evaluate the possibilities of utilization of selected plant species in phytoremediation of contaminated soils and waters, as well as the possibilities affecting the effectiveness of uptake and translocation of these metals in the plant tissues mainly in dependence on their

Application of Reproducing Kernel Method for Solving Nonlinear Fredholm-Volterra Integrodifferential Equations

Directory of Open Access Journals (Sweden)

Omar Abu Arqub

2012-01-01

Full Text Available This paper investigates the numerical solution of nonlinear Fredholm-Volterra integro-differential equations using reproducing kernel Hilbert space method. The solution ( is represented in the form of series in the reproducing kernel space. In the mean time, the n-term approximate solution ( is obtained and it is proved to converge to the exact solution (. Furthermore, the proposed method has an advantage that it is possible to pick any point in the interval of integration and as well the approximate solution and its derivative will be applicable. Numerical examples are included to demonstrate the accuracy and applicability of the presented technique. The results reveal that the method is very effective and simple.

Methods for production of aluminium powders and their application fields

Energy Technology Data Exchange (ETDEWEB)

Gopienko, V.G.; Kiselev, V.P.; Zobnina, N.S. (Vsesoyuznyj Nauchno-Issledovatel' skij i Proektnyj Inst. Alyuminievoj, magnievoj i ehlektrodnoj promyshlennosti (USSR))

1984-12-01

Different types of powder products made of alluminium and its alloys (powder, fine powders, granules and pastes) as well as their basic physicochemical properties are briefly characterized. The principle methods for alluminium powder production are outlined: physicochemical methods, the melt spraying by compressed gas being the mostly developed among them, and physico-mechanical ones. Main application spheres for powder productions of aluminium and its alloys are reported in short.

Methods for production of aluminium powders and their application fields

International Nuclear Information System (INIS)

Gopienko, V.G.; Kiselev, V.P.; Zobnina, N.S.

1984-01-01

Different types of powder products made of alluminium and its alloys (powder, fine powders, granules and pastes) as well as their basic physicochemical properties are briefly characterized. The principle methods for alluminium powder production are outlined: physicochemical methods, the melt spraying by compressed gas being the mostly developed among them, and physico-mechanical ones. Main application spheres for powder productions of aluminium and its alloys are reported in short

Development of the modified sum-peak method and its application

International Nuclear Information System (INIS)

Ogata, Y.; Miyahara, H.; Ishihara, M.; Ishigure, N.; Yamamoto, S.; Kojima, S.

2016-01-01

As the sum-peak method requires the total count rate as well as the peak count rates and the sum peak count rate, this meets difficulties when a sample contains other radionuclides than the one to be measured. To solve the problem, a new method using solely the peak and the sum peak count rates was developed. The method was theoretically and experimentally confirmed using "6"0Co, "2"2Na and "1"3"4Cs. We demonstrate that the modified sum-peak method is quite simple and practical and is useful to measure multiple nuclides. - Highlights: • A modified sum-peak method for simple radioactivity measurement was developed. • The method solely requires the peak count rates and the sum peak count rate. • The method is applicable to multiple radionuclides.

Introducing Students to the Application of Statistics and Investigative Methods in Political Science

Science.gov (United States)

Wells, Dominic D.; Nemire, Nathan A.

2017-01-01

This exercise introduces students to the application of statistics and its investigative methods in political science. It helps students gain a better understanding and a greater appreciation of statistics through a real world application.

Formal methods and their applicability in the development of safety critical software systems

International Nuclear Information System (INIS)

Sievertsen, T.

1995-01-01

The OECD Halden Reactor Project has for a number of years been involved in the development and application of a formal software specification and development method based on algebraic specification and the HRP Prover. In parallel to this activity the Project has been evaluating and comparing different methods and approaches to formal software development by their application on realistic case examples. Recent work has demonstrated that algebraic specification and the HRP Prover can be used both in the specification and design of a software system, even down to a concrete model which can be translated into the chosen implementation language. The HRP Prover is currently being used in a case study on the applicability of the methodology in the development of a power range monitoring system for a nuclear power plant. The presentation reviews some of the experiences drawn from the Project's research activities in this area, with special emphasis on questions relating to applicability and limitations, and the role of formal methods in the development of safety-critical software systems. (14 refs., 1 fig.)

Application of He’s Energy Balance Method to Duffing-Harmonic Oscillators

DEFF Research Database (Denmark)

Momeni, M.; Jamshidi, j.; Barari, Amin

2011-01-01

In this article, He's energy balance method is applied for calculating angular frequencies of nonlinear Duffing oscillators. This method offers a promising approach by constructing a Hamiltonian for the nonlinear oscillator. We illustrate that the energy balance is very effective and convenient...... and does not require linearization or small perturbation. Contrary to the conventional methods, in energy balance, only one iteration leads to high accuracy of the solutions. It is predicted that the energy balance method finds wide applications in engineering problems....

Applications of geographic information systems (GIS) data and methods in obesity-related research.

Science.gov (United States)

Jia, P; Cheng, X; Xue, H; Wang, Y

2017-04-01

Geographic information systems (GIS) data/methods offer good promise for public health programs including obesity-related research. This study systematically examined their applications and identified gaps and limitations in current obesity-related research. A systematic search of PubMed for studies published before 20 May 2016, utilizing synonyms for GIS in combination with synonyms for obesity as search terms, identified 121 studies that met our inclusion criteria. We found primary applications of GIS data/methods in obesity-related research included (i) visualization of spatial distribution of obesity and obesity-related phenomena, and basic obesogenic environmental features, and (ii) construction of advanced obesogenic environmental indicators. We found high spatial heterogeneity in obesity prevalence/risk and obesogenic environmental factors. Also, study design and characteristics varied considerably across studies because of lack of established guidance and protocols in the field, which may also have contributed to the mixed findings about environmental impacts on obesity. Existing findings regarding built environment are more robust than those regarding food environment. Applications of GIS data/methods in obesity research are still limited, and related research faces many challenges. More and better GIS data and more friendly analysis methods are needed to expand future GIS applications in obesity-related research. © 2017 World Obesity Federation.

Recent advances in computational methods and clinical applications for spine imaging

CERN Document Server

Glocker, Ben; Klinder, Tobias; Li, Shuo

2015-01-01

This book contains the full papers presented at the MICCAI 2014 workshop on Computational Methods and Clinical Applications for Spine Imaging. The workshop brought together scientists and clinicians in the field of computational spine imaging. The chapters included in this book present and discuss the new advances and challenges in these fields, using several methods and techniques in order to address more efficiently different and timely applications involving signal and image acquisition, image processing and analysis, image segmentation, image registration and fusion, computer simulation, image based modeling, simulation and surgical planning, image guided robot assisted surgical and image based diagnosis. The book also includes papers and reports from the first challenge on vertebra segmentation held at the workshop.

3rd Workshop on "Combinations of Intelligent Methods and Applications"

CERN Document Server

Palade, Vasile

2013-01-01

The combination of different intelligent methods is a very active research area in Artificial Intelligence (AI). The aim is to create integrated or hybrid methods that benefit from each of their components.  The 3rd Workshop on “Combinations of Intelligent Methods and Applications” (CIMA 2012) was intended to become a forum for exchanging experience and ideas among researchers and practitioners who are dealing with combining intelligent methods either based on first principles or in the context of specific applications. CIMA 2012 was held in conjunction with the 22nd European Conference on Artificial Intelligence (ECAI 2012).This volume includes revised versions of the papers presented at CIMA 2012.  .

Pesticide Environmental Accounting: A method for assessing the external costs of individual pesticide applications

International Nuclear Information System (INIS)

Leach, A.W.; Mumford, J.D.

2008-01-01

The Pesticide Environmental Accounting (PEA) tool provides a monetary estimate of environmental and health impacts per hectare-application for any pesticide. The model combines the Environmental Impact Quotient method and a methodology for absolute estimates of external pesticide costs in UK, USA and Germany. For many countries resources are not available for intensive assessments of external pesticide costs. The model converts external costs of a pesticide in the UK, USA and Germany to Mediterranean countries. Economic and policy applications include estimating impacts of pesticide reduction policies or benefits from technologies replacing pesticides, such as sterile insect technique. The system integrates disparate data and approaches into a single logical method. The assumptions in the system provide transparency and consistency but at the cost of some specificity and precision, a reasonable trade-off for a method that provides both comparative estimates of pesticide impacts and area-based assessments of absolute impacts. - A method to estimate the external costs of a pesticide application based on the ecotoxicology, environmental behaviour and application rate of an active ingredient

Applications of Monte Carlo method in Medical Physics

International Nuclear Information System (INIS)

Diez Rios, A.; Labajos, M.

1989-01-01

The basic ideas of Monte Carlo techniques are presented. Random numbers and their generation by congruential methods, which underlie Monte Carlo calculations are shown. Monte Carlo techniques to solve integrals are discussed. The evaluation of a simple monodimensional integral with a known answer, by means of two different Monte Carlo approaches are discussed. The basic principles to simualate on a computer photon histories reduce variance and the current applications in Medical Physics are commented. (Author)

Effects of slurry application methods on soil faunal communities in permanent grassland

NARCIS (Netherlands)

Vliet, van P.C.J.; Goede, de R.G.M.

2006-01-01

We studied the effects of two slurry manure application methods, broadcasting manure slurry (MB) and manure slit injection (SMI), on soil faunal communities 1 week and 4 or 5 weeks after application in the spring of 2002 and the summer of 2003. No effect on total numbers of Enchytraeidae and

Geotechnical applications of a two-dimensional elastodynamic displacement discontinuity method

CSIR Research Space (South Africa)

Siebrits, E

1993-12-01

Full Text Available A general two-dimensional elastodynamic displacement discontinuity method is used to model a variety of application problems. The plane strain problems are: the elastodynamic motions induced on a cavity by shear slip on a nearby crack; the dynamic...

Influence of application methods of one-step self-etching adhesives on microtensile bond strength

OpenAIRE

Chul-Kyu Choi,; Sung-Ae Son; Jin-Hee Ha; Bock Hur; Hyeon-Cheol Kim; Yong-Hun Kwon; Jeong-Kil Park

2011-01-01

Objectives The purpose of this study was to evaluate the effect of various application methods of one-step self-etch adhesives to microtensile resin-dentin bond strength. Materials and Methods Thirty-six extracted human molars were used. The teeth were assigned randomly to twelve groups (n = 15), according to the three different adhesive systems (Clearfil Tri-S Bond, Adper Prompt L-Pop, G-Bond) and application methods. The adhesive systems were applied on the dentin as follows: 1) T...

Comparison of methods for intestinal histamine application

DEFF Research Database (Denmark)

Vind, S; Søondergaard, I; Poulsen, L K

1991-01-01

The study was conducted to investigate whether introduction of histamine in enterosoluble capsules produced the same amount of urinary histamine metabolites as that found after application of histamine through a duodeno-jejunal tube. Secondly, to examine whether a histamine-restrictive or a fast ...... conclude that oral administration of enterosoluble capsules is an easy and appropriate method for intestinal histamine challenge. Fast and histamine-restrictive diets are not necessary, but subjects should record unexpected responses in a food and symptom diary.......The study was conducted to investigate whether introduction of histamine in enterosoluble capsules produced the same amount of urinary histamine metabolites as that found after application of histamine through a duodeno-jejunal tube. Secondly, to examine whether a histamine-restrictive or a fast...... all other intervals did not differ significantly between the two challenge regimens. Fast (water only) and histamine-restrictive diet versus non-restrictive diet did not affect the urinary MIAA. MIAA was significantly higher overall during the first 24 h after challenge than in any other fraction. We...

Numerical methods in image processing for applications in jewellery industry

OpenAIRE

Petrla, Martin

2016-01-01

Presented thesis deals with a problem from the field of image processing for application in multiple scanning of jewelery stones. The aim is to develop a method for preprocessing and subsequent mathematical registration of images in order to increase the effectivity and reliability of the output quality control. For these purposes the thesis summerizes mathematical definition of digital image as well as theoretical base of image registration. It proposes a method adjusting every single image ...

Learning in Non-Stationary Environments Methods and Applications

CERN Document Server

Lughofer, Edwin

2012-01-01

Recent decades have seen rapid advances in automatization processes, supported by modern machines and computers. The result is significant increases in system complexity and state changes, information sources, the need for faster data handling and the integration of environmental influences. Intelligent systems, equipped with a taxonomy of data-driven system identification and machine learning algorithms, can handle these problems partially. Conventional learning algorithms in a batch off-line setting fail whenever dynamic changes of the process appear due to non-stationary environments and external influences.   Learning in Non-Stationary Environments: Methods and Applications offers a wide-ranging, comprehensive review of recent developments and important methodologies in the field. The coverage focuses on dynamic learning in unsupervised problems, dynamic learning in supervised classification and dynamic learning in supervised regression problems. A later section is dedicated to applications in which dyna...

Application of FMEA method in railway signalling projects

Directory of Open Access Journals (Sweden)

Szmel Dariusz

2017-06-01

Full Text Available The article presents the FMEA method application, which is relevant in verification of design of two separated railway signalling systems. The efficiency of the method at the stage of the design was discussed. The method was identified as an important element of safety management process and as safety analysis method, which is included in the Safety Case and is applied for the sake of safety arguments and its assessment. Safety process management comprises several phases and appropriate actions, linked with each other in the way to create safety life cycle consistent with system life cycle. The safety case is a set of documents demonstrating that the product is compliant with defined safety requirements including analysis that indicates the correctness of the design and the correct reaction of the system to the failures, with appropriate and requested fail-safe reaction. It is necessary that railway signalling system should fulfil SIL4 requirement and remain safe in case of occurrence any kind of single failure of the equipment considered as possible.

The application of geophysical methods to archaeological prospection

Energy Technology Data Exchange (ETDEWEB)

Linford, Neil [Geophysics Team, English Heritage, Fort Cumberland, Eastney, Portsmouth PO4 9LD (United Kingdom)

2006-07-15

The aim of this review is to combine the almost universal fascination we share for our past with the comparatively recent, in archaeological terms, application of geophysical prospection methods. For their success, each of these methods relies upon a physical contrast to exist between the buried archaeological feature and the properties of the surrounding subsoil. Understanding the archaeological origin of such physical contrasts, in terms of density, thermal conductivity, electrical resistance, magnetic or dielectric properties, remains fundamental to an appreciation of the discipline. This review provides a broad introduction to the subject area acknowledging the historical development of the discipline and discusses each of the major techniques in turn: earth resistance, magnetic and electromagnetic methods (including ground penetrating radar), together with an appreciation of more esoteric approaches, such as the use of micro-gravity survey to detect buried chambers and voids. The physical principles and field instrumentation involved for the acquisition of data with each method are considered and fully illustrated with case histories of results from the English Heritage archives.

The application of geophysical methods to archaeological prospection

International Nuclear Information System (INIS)

Linford, Neil

2006-01-01

The aim of this review is to combine the almost universal fascination we share for our past with the comparatively recent, in archaeological terms, application of geophysical prospection methods. For their success, each of these methods relies upon a physical contrast to exist between the buried archaeological feature and the properties of the surrounding subsoil. Understanding the archaeological origin of such physical contrasts, in terms of density, thermal conductivity, electrical resistance, magnetic or dielectric properties, remains fundamental to an appreciation of the discipline. This review provides a broad introduction to the subject area acknowledging the historical development of the discipline and discusses each of the major techniques in turn: earth resistance, magnetic and electromagnetic methods (including ground penetrating radar), together with an appreciation of more esoteric approaches, such as the use of micro-gravity survey to detect buried chambers and voids. The physical principles and field instrumentation involved for the acquisition of data with each method are considered and fully illustrated with case histories of results from the English Heritage archives

Development and application of the discrete ordinate method in orthogonal curvilinear coordinates; Developpement et application de la methode des ordonnees discretes en coordonnees curvilignes orthogonales

Energy Technology Data Exchange (ETDEWEB)

Vaillon, R; Lallemand, M; Lemonnier, D [Ecole Nationale Superieure de Mecanique et d` Aerotechnique (ENSMA), 86 - Poitiers (France)

1997-12-31

The method of discrete ordinates, which is more and more widely used in radiant heat transfer studies, is mainly developed in Cartesian, (r,z) and (r,{Theta}) cylindrical, and spherical coordinates. In this study, the approach of this method is performed in orthogonal curvilinear coordinates: determination of the radiant heat transfer equation, treatment of the angular redistribution terms, numerical procedure. Some examples of application are described in 2-D geometry defined in curvilinear coordinates along a curve and at the thermal equilibrium. A comparison is made with the discrete ordinates method in association with the finite-volumes method in non structured mesh. (J.S.) 27 refs.

Development and application of the discrete ordinate method in orthogonal curvilinear coordinates; Developpement et application de la methode des ordonnees discretes en coordonnees curvilignes orthogonales

Energy Technology Data Exchange (ETDEWEB)

Vaillon, R.; Lallemand, M.; Lemonnier, D. [Ecole Nationale Superieure de Mecanique et d`Aerotechnique (ENSMA), 86 - Poitiers (France)

1996-12-31

The method of discrete ordinates, which is more and more widely used in radiant heat transfer studies, is mainly developed in Cartesian, (r,z) and (r,{Theta}) cylindrical, and spherical coordinates. In this study, the approach of this method is performed in orthogonal curvilinear coordinates: determination of the radiant heat transfer equation, treatment of the angular redistribution terms, numerical procedure. Some examples of application are described in 2-D geometry defined in curvilinear coordinates along a curve and at the thermal equilibrium. A comparison is made with the discrete ordinates method in association with the finite-volumes method in non structured mesh. (J.S.) 27 refs.

Emerging non-invasive Raman methods in process control and forensic applications.

Science.gov (United States)

Macleod, Neil A; Matousek, Pavel

2008-10-01

This article reviews emerging Raman techniques (Spatially Offset and Transmission Raman Spectroscopy) for non-invasive, sub-surface probing in process control and forensic applications. New capabilities offered by these methods are discussed and several application examples are given including the non-invasive detection of counterfeit drugs through blister packs and opaque plastic bottles and the rapid quantitative analysis of the bulk content of pharmaceutical tablets and capsules without sub-sampling.

Application of Stochastic Sensitivity Analysis to Integrated Force Method

Directory of Open Access Journals (Sweden)

X. F. Wei

2012-01-01

Full Text Available As a new formulation in structural analysis, Integrated Force Method has been successfully applied to many structures for civil, mechanical, and aerospace engineering due to the accurate estimate of forces in computation. Right now, it is being further extended to the probabilistic domain. For the assessment of uncertainty effect in system optimization and identification, the probabilistic sensitivity analysis of IFM was further investigated in this study. A set of stochastic sensitivity analysis formulation of Integrated Force Method was developed using the perturbation method. Numerical examples are presented to illustrate its application. Its efficiency and accuracy were also substantiated with direct Monte Carlo simulations and the reliability-based sensitivity method. The numerical algorithm was shown to be readily adaptable to the existing program since the models of stochastic finite element and stochastic design sensitivity are almost identical.

Applications of hybrid time-frequency methods in nonlinear structural dynamics

International Nuclear Information System (INIS)

Politopoulos, I.; Piteau, Ph.; Borsoi, L.; Antunes, J.

2014-01-01

This paper presents a study on methods which may be used to compute the nonlinear response of systems whose linear properties are determined in the frequency or Laplace domain. Typically, this kind of situation may arise in soil-structure and fluid-structure interaction problems. In particular three methods are investigated: (a) the hybrid time-frequency method, (b) the computation of the convolution integral which requires an inverse Fourier or Laplace transform of the system's transfer function, and (c) the identification of an equivalent system defined in the time domain which may be solved with classical time integration methods. These methods are illustrated by their application to some simple, one degree of freedom, non-linear systems and their advantages and drawbacks are highlighted. (authors)

Application of the Exp-function method to the equal-width wave equation

International Nuclear Information System (INIS)

Biazar, J; Ayati, Z

2008-01-01

In this paper, the Exp-function method is used to find an exact solution of the equal-width wave (EW) equation. The method is straightforward and concise, and its applications are promising. It is shown that the Exp-function method, with the help of symbolic computation, provides a very effective and powerful mathematical tool for solving the EW equation.

A second-order shock-expansion method applicable to bodies of revolution near zero lift

Science.gov (United States)

1957-01-01

A second-order shock-expansion method applicable to bodies of revolution is developed by the use of the predictions of the generalized shock-expansion method in combination with characteristics theory. Equations defining the zero-lift pressure distributions and the normal-force and pitching-moment derivatives are derived. Comparisons with experimental results show that the method is applicable at values of the similarity parameter, the ratio of free-stream Mach number to nose fineness ratio, from about 0.4 to 2.

Use and application of 'best estimate plus uncertainty' methods. A regulatory view

International Nuclear Information System (INIS)

Mendizabal, Rafael; Pelayo, Fernando

2013-01-01

Regulatory environment is characterized by its prevention to change. Any move has to be solidly founded. Application in licensing of Best Estimate Plus Uncertainty (BEPU) methods is not an exception. Typically a fully deterministic approach as described in IAEA SSG-2 is used for design bases accident analyses in current Nuclear Power Plants. In recent years the use of BEPU methodologies is gaining favor in the nuclear technology community as a way to optimize design and operation while preserving full compliance with applicable regulation. This paper has its focus on the regulatory relevance of the use of BEPU in licensing practices. A regulatory analysis describing the rationale of the evolution from classic deterministic methods to BEPU as well as a selected set of topics around the implications of the use of BEPU methods is shown. To finalize some conclusions and thoughts of possible further developments of these methods are drawn. (authors)

Statistical methods for longitudinal data with agricultural applications

DEFF Research Database (Denmark)

Anantharama Ankinakatte, Smitha

The PhD study focuses on modeling two kings of longitudinal data arising in agricultural applications: continuous time series data and discrete longitudinal data. Firstly, two statistical methods, neural networks and generalized additive models, are applied to predict masistis using multivariate...... algorithm. This was found to compare favourably with the algorithm implemented in the well-known Beagle software. Finally, an R package to apply APFA models developed as part of the PhD project is described...

Applications of the discrete element method in mechanical engineering

International Nuclear Information System (INIS)

Fleissner, Florian; Gaugele, Timo; Eberhard, Peter

2007-01-01

Compared to other fields of engineering, in mechanical engineering, the Discrete Element Method (DEM) is not yet a well known method. Nevertheless, there is a variety of simulation problems where the method has obvious advantages due to its meshless nature. For problems where several free bodies can collide and break after having been largely deformed, the DEM is the method of choice. Neighborhood search and collision detection between bodies as well as the separation of large solids into smaller particles are naturally incorporated in the method. The main DEM algorithm consists of a relatively simple loop that basically contains the three substeps contact detection, force computation and integration. However, there exists a large variety of different algorithms to choose the substeps to compose the optimal method for a given problem. In this contribution, we describe the dynamics of particle systems together with appropriate numerical integration schemes and give an overview over different types of particle interactions that can be composed to adapt the method to fit to a given simulation problem. Surface triangulations are used to model complicated, non-convex bodies in contact with particle systems. The capabilities of the method are finally demonstrated by means of application examples

Comparison of optical design methods of freeform surfaces for imaging applications

Science.gov (United States)

Agócs, Tibor

2015-09-01

Optical systems based on freeform optical components offer many advantages over conventional systems in imaging applications, e.g. superior image quality, compact and lightweight designs. There are a few well established manufacturing method that can be used for the generation of freeform surfaces with low surface form error and low surface roughness, in the case of freeform mirrors e.g. diamond turning, nickel plating and post-polishing. Metrology is evolving rapidly, although developments are still needed in order to verify the manufactured surface with the necessary accuracy. Optical design methods of freeform surfaces are also lagging behind, many algorithms address non-imaging applications, but in the field of imaging (image-forming) only a few exists and works with various limitations. We compare the available techniques in freeform optical design for imaging and explore the advantages, disadvantages and boundary conditions of the different methods. We also intend to identify the most useful concepts and investigate how they can be embedded into commercially available optical design software.

Molecular methods for typing of Helicobacter pylori and their applications

DEFF Research Database (Denmark)

Colding, H; Hartzen, S H; Roshanisefat, H

1999-01-01

.g. the urease genes. Furthermore, reproducibility, discriminatory power, ease of performance and interpretation, cost and toxic procedures of each method are assessed. To date no direct comparison of all the molecular typing methods described has been performed in the same study with the same H. pylori strains....... However, PCR analysis of the urease gene directly on suspensions of H. pylori or gastric biopsy material seems to be useful for routine use and applicable in specific epidemiological situations....

Nanoscale thermal transport: Theoretical method and application

Science.gov (United States)

Zeng, Yu-Jia; Liu, Yue-Yang; Zhou, Wu-Xing; Chen, Ke-Qiu

2018-03-01

With the size reduction of nanoscale electronic devices, the heat generated by the unit area in integrated circuits will be increasing exponentially, and consequently the thermal management in these devices is a very important issue. In addition, the heat generated by the electronic devices mostly diffuses to the air in the form of waste heat, which makes the thermoelectric energy conversion also an important issue for nowadays. In recent years, the thermal transport properties in nanoscale systems have attracted increasing attention in both experiments and theoretical calculations. In this review, we will discuss various theoretical simulation methods for investigating thermal transport properties and take a glance at several interesting thermal transport phenomena in nanoscale systems. Our emphasizes will lie on the advantage and limitation of calculational method, and the application of nanoscale thermal transport and thermoelectric property. Project supported by the Nation Key Research and Development Program of China (Grant No. 2017YFB0701602) and the National Natural Science Foundation of China (Grant No. 11674092).

Theory and applications of moment methods in many-fermion systems

International Nuclear Information System (INIS)

Dalton, B.J.; Grimes, S.M.; Vary, J.P.; Williams, S.A.

1980-01-01

This book contains the proceedings of a conference on the application of the moment problem which was held at Ames, Iowa, September 10-13, 1979. It is, generally speaking, a well-printed book consisting of photo-offset reproductions of typed contributions. First of all, there are articles on the general method of moments such as the ones by French. Secondly, there are articles on how to actually calculate these moments. Current progress in recent years has been made on this computational endeavor, which is what makes the moment method particularly useful and interesting now. The articles by Ginnochio, Bloom and Hausman, and Vary are representative of these techniques. Thirdly, there are articles on what to do with the moments once you obtain them. Articles by Langhoff, Whitehead, and Bessis are representative here. Of particular interest to this reviewer is the fact that all of these methods seem to be mathematically quite closely related to various Pade approximant techniques. Finally, there are articles on the problems from which these moment problems arise. Mainly in this book nuclear physics examples are described, although some mention is made of other topics. De Facio et al. discuss application to the Ising model

EPR of free radicals in solids I trends in methods and applications

CERN Document Server

Lund, Anders; Lund, Anders

2012-01-01

In its updated 2nd edition, this book surveys methods and applications of EPR in the study of free radical processes in solids. The focus is on trends in methods for extracting structural and dynamical properties of radicals and spin probes in solid matrices.

The methods and applications of optimization of radiation protection

International Nuclear Information System (INIS)

Liu Hua

2007-01-01

Optimization is the most important principle in radiation protection. The present article briefs the concept and up-to-date progress of optimization of protection, introduces some methods used in current optimization analysis, and presents various applications of optimization of protection. The author emphasizes that optimization of protection is a forward-looking iterative process aimed at preventing exposures before they occur. (author)

TRIZ method application for improving the special vehicles maintenance

OpenAIRE

Petrović Saša; Lozanović-Šajić Jasmina; Knežević Tijana; Pavlović Jovan; Ivanov Goran

2014-01-01

TRIZ methodology provides an opportunity for improving the classical engineering approach based on personal knowledge and experience. This paper presents the application of TRIZ methods for improving vehicle maintenance where special equipment is installed. A specific problem is the maintenance of the periscopes with heating system. Protective glass panels with heating system are rectangular glass elements. Their purpose is to perform mechanical protection ...

The effect of different fluoride application methods on the remineralization of initial carious lesions.

Science.gov (United States)

Byeon, Seon Mi; Lee, Min Ho; Bae, Tae Sung

2016-05-01

The purpose of this study was to assess the effect of single and combined applications of fluoride on the amount of fluoride release, and the remineralization and physical properties of enamel. Each of four fluoride varnish and gel products (Fluor Protector, FP, Ivoclar Vivadent; Tooth Mousse Plus, TM, GC; 60 Second Gel, A, Germiphene; CavityShield, CS, 3M ESPE) and two fluoride solutions (2% sodium fluoride, N; 8% tin(ii) fluoride, S) were applied on bovine teeth using single and combined methods (10 per group), and then the amount of fluoride release was measured for 4 wk. The electron probe microanalysis and the Vickers microhardness measurements were conducted to assess the effect of fluoride application on the surface properties of bovine teeth. The amount of fluoride release was higher in combined applications than in single application (p < 0.05). Microhardness values were higher after combined applications of N with FP, TM, and CS than single application of them, and these values were also higher after combined applications of S than single application of A (p < 0.05). Ca and P values were higher in combined applications of N with TM and CS than single application of them (p < 0.05). They were also increased after combined applications of the S with A than after single application (p < 0.05). Combined applications of fluoride could be used as a basis to design more effective methods of fluoride application to provide enhanced remineralization.

Applicability of soil-structure interaction analysis methods for earthquake loadings (V)

International Nuclear Information System (INIS)

Chang, S. P.; Ko, H. M.; Kim, J. K.; Yoon, J. Y.; Chin, B. M.; Yang, T. S.; Park, J. Y.; Cho, J. R.; Ryu, H.

1997-07-01

The ultimate goals of this research are to cultivate the capability of accurate 551 analysis and to develop the effective soil-structure interaction analysis method and computer program by comparing analysis results obtained in Lotung/Hualien lS5T project. In this research, the scope of this study is to establish the method of soil-structure interaction analysis using hyperlement and to develop a computer program of 551 analysis, to do parametric study for the comprehension of the characteristics and the applicability of hyper elements and to verify the validity and the applicability of this method(or program) through the analysis of seismic response of Hualien lS5T project. In this study, we verified the validity and the efficiency of the soil-structure interaction analysis method using hyper elements and developed computer programs using hyper elements. Based on the I-dimensional wave propagation theory, we developed a computer program of free-field analysis considering the primary non-lineriry of seismic responses. And using this program, we computed the effective ground earthquake motions of soil regions. The computer programs using hyper elements can treat non-homogeneity of soil regions very easily and perform the analysis quickly by the usage of the analytical solutions in horizontal direction. 50 this method would be very efficient and practical method

Application of the R-matrix method to photoionization of molecules.

Science.gov (United States)

Tashiro, Motomichi

2010-04-07

The R-matrix method has been used for theoretical calculation of electron collision with atoms and molecules for long years. The method was also formulated to treat photoionization process, however, its application has been mostly limited to photoionization of atoms. In this work, we implement the R-matrix method to treat molecular photoionization problem based on the UK R-matrix codes. This method can be used for diatomic as well as polyatomic molecules, with multiconfigurational description for electronic states of both target neutral molecule and product molecular ion. Test calculations were performed for valence electron photoionization of nitrogen (N(2)) as well as nitric oxide (NO) molecules. Calculated photoionization cross sections and asymmetry parameters agree reasonably well with the available experimental results, suggesting usefulness of the method for molecular photoionization.

Application of 1 D Finite Element Method in Combination with Laminar Solution Method for Pipe Network Analysis

Science.gov (United States)

Dudar, O. I.; Dudar, E. S.

2017-11-01

The features of application of the 1D dimensional finite element method (FEM) in combination with the laminar solutions method (LSM) for the calculation of underground ventilating networks are considered. In this case the processes of heat and mass transfer change the properties of a fluid (binary vapour-air mix). Under the action of gravitational forces it leads to such phenomena as natural draft, local circulation, etc. The FEM relations considering the action of gravity, the mass conservation law, the dependence of vapour-air mix properties on the thermodynamic parameters are derived so that it allows one to model the mentioned phenomena. The analogy of the elastic and plastic rod deformation processes to the processes of laminar and turbulent flow in a pipe is described. Owing to this analogy, the guaranteed convergence of the elastic solutions method for the materials of plastic type means the guaranteed convergence of the LSM for any regime of a turbulent flow in a rough pipe. By means of numerical experiments the convergence rate of the FEM - LSM is investigated. This convergence rate appeared much higher than the convergence rate of the Cross - Andriyashev method. Data of other authors on the convergence rate comparison for the finite element method, the Newton method and the method of gradient are provided. These data allow one to conclude that the FEM in combination with the LSM is one of the most effective methods of calculation of hydraulic and ventilating networks. The FEM - LSM has been used for creation of the research application programme package “MineClimate” allowing to calculate the microclimate parameters in the underground ventilating networks.

Applicability of the proposed evaluation method for social infrastructures to nuclear power plants

International Nuclear Information System (INIS)

Ichimura, Tomiyasu

2015-01-01

This study proposes an evaluation method for social infrastructures, and verifies the applicability of the proposed evaluation method to social infrastructures by applying it to nuclear power plants, which belong to social infrastructures. In the proposed evaluation method for social infrastructures, the authors chose four evaluation viewpoints and proposed common evaluation standards for the evaluation indexes obtained from each viewpoint. By applying this system to the evaluation of nuclear power plants, the evaluation index examples were obtained from the evaluation viewpoints. Furthermore, when the level of the common evaluation standards of the proposed evaluation method was applied to the evaluation of the activities of nuclear power plants based on the regulations, it was confirmed that these activities are at the highest level. Through this application validation, it was clarified that the proposed evaluation method for social infrastructures had certain effectiveness. The four evaluation viewpoints are 'service,' 'environment,' 'action factor,' and 'operation and management.' Part of the application examples to a nuclear power plant are as follows: (1) in the viewpoint of service: the operation rate of the power plant, and operation costs, and (2) in the viewpoint of environment: external influence related to nuclear waste and radioactivity, and external effect related to cooling water. (A.O.)

Cattle slurry on grassland - application methods and nitrogen use efficiency

NARCIS (Netherlands)

Lalor, S.T.J.

2014-01-01

Cattle slurry represents a significant resource on grassland-based farming systems. The objective of this thesis was to investigate and devise cattle slurry application methods and strategies that can be implemented on grassland farms to improve the efficiency with which nitrogen (N) in

Review of the modified finite particle method and application to incompressible solids

Directory of Open Access Journals (Sweden)

D Asprone

2016-10-01

Full Text Available This paper focuses on the application of the Modified Finite Particle Method (MFPM on incompressibile elasticity problems. MFPM belongs to the class of meshless methods, nowadays widely investigated due to their characteristics of being totally free of any kind of grid or mesh. This characteristic makes meshless methods potentially useful for the study of large deformations problems and fluid dynamics. In particular, the aim of the work is to compare the results obtained with a simple displacement-based formulation, in the limit of incompressibility, and some formulations proposed in the literature for full incompressibility, where the typical divergence-free constraint is replaced by a different equation, the so-called Pressure Poisson Equation. The obtained results show that the MFPM achieves the expected second-order accuracy on formulation where the equations imposed as constraint satisfies also the original incompressibility equation. Other formulations, differently, do not satisfy the incompressibility constraint, and thus, they are not successfully applicable with the Modified Finite Particle Method.

Application of linear scheduling method (LSM) for nuclear power plant (NPP) construction

International Nuclear Information System (INIS)

Kim, Woojoong; Ryu, Dongsoo; Jung, Youngsoo

2014-01-01

Highlights: • Mixed use of linear scheduling method with traditional CPM is suggested for NPP. • A methodology for selecting promising areas for LSM application is proposed. • A case-study is conducted to validate the proposed LSM selection methodology. • A case-study of reducing NPP construction duration by using LSM is introduced. - Abstract: According to a forecast, global energy demand is expected to increase by 56% from 2010 to 2040 (EIA, 2013). The nuclear power plant construction market is also growing with sharper competition. In nuclear power plant construction, scheduling is one of the most important functions due to its large size and complexity. Therefore, it is crucial to incorporate the ‘distinct characteristics of construction commodities and the complex characteristics of scheduling techniques’ (Jung and Woo, 2004) when selecting appropriate schedule control methods for nuclear power plant construction. However, among various types of construction scheduling techniques, the traditional critical path method (CPM) has been used most frequently in real-world practice. In this context, the purpose of this paper is to examine the viability and effectiveness of linear scheduling method (LSM) applications for specific areas in nuclear power plant construction. In order to identify the criteria for selecting scheduling techniques, the characteristics of CPM and LSM were compared and analyzed first through a literature review. Distinct characteristics of nuclear power plant construction were then explored by using a case project in order to develop a methodology to select effective areas of LSM application to nuclear power plant construction. Finally, promising areas for actual LSM application are suggested based on the proposed evaluation criteria and the case project. Findings and practical implications are discussed for further implementation

Application of linear scheduling method (LSM) for nuclear power plant (NPP) construction

Energy Technology Data Exchange (ETDEWEB)

Kim, Woojoong, E-mail: minidung@nate.com [Central Research Institute, Korea Hydro and Nuclear Power Co., Ltd, Daejeon 305-343 (Korea, Republic of); Ryu, Dongsoo, E-mail: energyboy@khnp.co.kr [Central Research Institute, Korea Hydro and Nuclear Power Co., Ltd, Daejeon 305-343 (Korea, Republic of); Jung, Youngsoo, E-mail: yjung97@mju.ac.kr [College of Architecture, Myongji University, Yongin 449-728 (Korea, Republic of)

2014-04-01

Highlights: • Mixed use of linear scheduling method with traditional CPM is suggested for NPP. • A methodology for selecting promising areas for LSM application is proposed. • A case-study is conducted to validate the proposed LSM selection methodology. • A case-study of reducing NPP construction duration by using LSM is introduced. - Abstract: According to a forecast, global energy demand is expected to increase by 56% from 2010 to 2040 (EIA, 2013). The nuclear power plant construction market is also growing with sharper competition. In nuclear power plant construction, scheduling is one of the most important functions due to its large size and complexity. Therefore, it is crucial to incorporate the ‘distinct characteristics of construction commodities and the complex characteristics of scheduling techniques’ (Jung and Woo, 2004) when selecting appropriate schedule control methods for nuclear power plant construction. However, among various types of construction scheduling techniques, the traditional critical path method (CPM) has been used most frequently in real-world practice. In this context, the purpose of this paper is to examine the viability and effectiveness of linear scheduling method (LSM) applications for specific areas in nuclear power plant construction. In order to identify the criteria for selecting scheduling techniques, the characteristics of CPM and LSM were compared and analyzed first through a literature review. Distinct characteristics of nuclear power plant construction were then explored by using a case project in order to develop a methodology to select effective areas of LSM application to nuclear power plant construction. Finally, promising areas for actual LSM application are suggested based on the proposed evaluation criteria and the case project. Findings and practical implications are discussed for further implementation.

[Application of a modified culturing method for lymphocytes in cytogenetic research].

Science.gov (United States)

Gao, Chaoxian; Hui, Changye; Zhang, Wen; Guo, Yan; Li, Limei; Chen, Yuting; Zhang, Liuzhuo; Yang, Xinyue; Huang, Xianqing

2016-08-01

To establish a modified method for microculturing whole human blood for cytogenetic analysis. A novel tube rack was designed to overcome the drawbacks of directly culturing the cells within centrifuge tubes. The fractions of human plasma, human serum and two commercial fetal bovine sera were analyzed with 15% sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The influence of adding 0%, 5%, 10%, 15%, 20%, 25% and 30% autologous plasma to the culture on lymphocyte transformation rate and mitotic index (MI) was examined. The SDS-PAGE analysis showed a significant difference between commercial fetal bovine sera, and that the components of human plasma were similar to those of fetal bovine serum. The value of MI in lymphocyte was evidently increased along with addition of autologous plasma. However, this has exerted no significant effect on the transformation rate. With the addition of 10% autologous plasma, the MI value has become much higher than the conventional method. A modified method was established by application of a novel tube inclined rack and optimization of whole blood inoculation. This method is easier and cheaper, and is suitable for application in clinical practice.

Morphological Characterization of Nanofibers: Methods and Application in Practice

Directory of Open Access Journals (Sweden)

Jakub Širc

2012-01-01

Full Text Available Biomedical applications such as wound dressing for skin regeneration, stem cell transplantation, or drug delivery require special demands on the three-dimensional porous scaffolds. Besides the biocompatibility and mechanical properties, the morphology is the most important attribute of the scaffold. Specific surface area, volume, and size of the pores have considerable effect on cell adhesion, growth, and proliferation. In the case of incorporated biologically active substances, their release is also influenced by the internal structure of nanofibers. Although many scientific papers are focused on the preparation of nanofibers and evaluation of biological tests, the morphological characterization was described just briefly as service methods. The aim of this paper is to summarize the methods applicable for morphological characterization of nanofibers and supplement it by the results of our research. Needleless electrospinning technique was used to prepare nanofibers from polylactide, poly(ε-caprolactone, gelatin, and polyamide. Scanning electron microscopy was used to evaluate the fiber diameters and to reveal eventual artifacts in the nanofibrous structure. Nitrogen adsorption/desorption measurements were employed to measure the specific surface areas. Mercury porosimetry was used to determine total porosities and compare pore size distributions of the prepared samples.

Applications of the infinite momentum method to quantum electrodynamics and bound state problem

International Nuclear Information System (INIS)

Brodsky, S.J.

1973-01-01

It is shown that the infinite momentum method is a valid and useful calculational alternative to standard perturbation theory methods. The most exciting future applications may be in bound state problems in quantum electrodynamics

Application of the invariant embedding method to analytically solvable transport problems

Energy Technology Data Exchange (ETDEWEB)

Wahlberg, Malin

2005-05-01

The applicability and performance of the invariant embedding method for calculating various transport quantities is investigated in this thesis. The invariant embedding method is a technique to calculate the reflected or transmitted fluxes in homogeneous half-spaces and slabs, without the need for solving for the flux inside the medium. In return, the embedding equations become non-linear, and in practical cases they need to be solved by numerical methods. There are, however, fast and effective iterative methods available for this purpose. The objective of this thesis is to investigate the performance of these iterative methods in model problems, in which also an exact analytical solution can be obtained. Some of these analytical solutions are also new, hence their derivation constitutes a part of the thesis work. The cases investigated in the thesis all concern the calculation of reflected fluxes from half-spaces. The first problem treated was the calculation of the energy spectrum of reflected (sputtered) particles from a multiplying medium, where the multiplication arises from recoil production (i.e. like binary fission), when bombarded by o flux of monoenergetic particles of the same type. Both constant cross sections and energy dependent cross sections with a power law dependence were used in the calculations. The second class of problems concerned the calculation of the path length distribution of reflected particles from a medium without multiplication. It is an interesting new observation that the distribution of the path length travelled in the medium before reflection can be calculated with invariant embedding methods, which actually do not solve the flux distribution in the medium. We have tested the accuracy and the convergence properties of the embedding method also for this case. Finally, very recently a theory of connecting the infinite and half-space medium solutions by embedding-like integral equations was developed and reported in the literature

Application of the invariant embedding method to analytically solvable transport problems

International Nuclear Information System (INIS)

Wahlberg, Malin

2005-05-01

The applicability and performance of the invariant embedding method for calculating various transport quantities is investigated in this thesis. The invariant embedding method is a technique to calculate the reflected or transmitted fluxes in homogeneous half-spaces and slabs, without the need for solving for the flux inside the medium. In return, the embedding equations become non-linear, and in practical cases they need to be solved by numerical methods. There are, however, fast and effective iterative methods available for this purpose. The objective of this thesis is to investigate the performance of these iterative methods in model problems, in which also an exact analytical solution can be obtained. Some of these analytical solutions are also new, hence their derivation constitutes a part of the thesis work. The cases investigated in the thesis all concern the calculation of reflected fluxes from half-spaces. The first problem treated was the calculation of the energy spectrum of reflected (sputtered) particles from a multiplying medium, where the multiplication arises from recoil production (i.e. like binary fission), when bombarded by o flux of monoenergetic particles of the same type. Both constant cross sections and energy dependent cross sections with a power law dependence were used in the calculations. The second class of problems concerned the calculation of the path length distribution of reflected particles from a medium without multiplication. It is an interesting new observation that the distribution of the path length travelled in the medium before reflection can be calculated with invariant embedding methods, which actually do not solve the flux distribution in the medium. We have tested the accuracy and the convergence properties of the embedding method also for this case. Finally, very recently a theory of connecting the infinite and half-space medium solutions by embedding-like integral equations was developed and reported in the literature

Application of a perturbation method for realistic dynamic simulation of industrial robots

NARCIS (Netherlands)

Waiboer, R.R.; Aarts, Ronald G.K.M.; Jonker, Jan B.

2005-01-01

This paper presents the application of a perturbation method for the closed-loop dynamic simulation of a rigid-link manipulator with joint friction. In this method the perturbed motion of the manipulator is modelled as a first-order perturbation of the nominal manipulator motion. A non-linear finite

Recent developments and applications of multi-configuration Hartree-Fock methods. NRCC proceedings No. 10

Energy Technology Data Exchange (ETDEWEB)

Dupuis, M. (ed.)

1981-02-01

Twenty-seven papers are included in four sessions titled: generalized Fock operator methods, annihilation of single excitations methods, second-order MCSCF methods, and applications of MCHF methods. Separate abstracts were prepared for eight papers; one of the remaining had been previously abstracted. (DLC)

Recent developments and applications of multi-configuration Hartree-Fock methods. NRCC proceedings No. 10

International Nuclear Information System (INIS)

Dupuis, M.

1981-02-01

Twenty-seven papers are included in four sessions titled: generalized Fock operator methods, annihilation of single excitations methods, second-order MCSCF methods, and applications of MCHF methods. Separate abstracts were prepared for eight papers; one of the remaining had been previously abstracted

Formal methods for industrial critical systems a survey of applications

CERN Document Server

Margaria-Steffen, Tiziana

2012-01-01

"Today, formal methods are widely recognized as an essential step in the design process of industrial safety-critical systems. In its more general definition, the term formal methods encompasses all notations having a precise mathematical semantics, together with their associated analysis methods, that allow description and reasoning about the behavior of a system in a formal manner.Growing out of more than a decade of award-winning collaborative work within the European Research Consortium for Informatics and Mathematics, Formal Methods for Industrial Critical Systems: A Survey of Applications presents a number of mainstream formal methods currently used for designing industrial critical systems, with a focus on model checking. The purpose of the book is threefold: to reduce the effort required to learn formal methods, which has been a major drawback for their industrial dissemination; to help designers to adopt the formal methods which are most appropriate for their systems; and to offer a panel of state-of...

V-amylose structural characteristics, methods of preparation, significance, and potential applications

CSIR Research Space (South Africa)

Obiro, WC

2012-02-01

Full Text Available , and postprandial hyperglycaemia in diabetics. Various aspects of V-amylose structure, methods of preparation, factors that affect its formation, and the significance and potential applications of the V-amylose complexes are reviewed....

Results from the Application of Uncertainty Methods in the CSNI Uncertainty Methods Study (UMS)

International Nuclear Information System (INIS)

Glaeser, H.

2008-01-01

Within licensing procedures there is the incentive to replace the conservative requirements for code application by a - best estimate - concept supplemented by an uncertainty analysis to account for predictive uncertainties of code results. Methods have been developed to quantify these uncertainties. The Uncertainty Methods Study (UMS) Group, following a mandate from CSNI, has compared five methods for calculating the uncertainty in the predictions of advanced -best estimate- thermal-hydraulic codes. Most of the methods identify and combine input uncertainties. The major differences between the predictions of the methods came from the choice of uncertain parameters and the quantification of the input uncertainties, i.e. the wideness of the uncertainty ranges. Therefore, suitable experimental and analytical information has to be selected to specify these uncertainty ranges or distributions. After the closure of the Uncertainty Method Study (UMS) and after the report was issued comparison calculations of experiment LSTF-SB-CL-18 were performed by University of Pisa using different versions of the RELAP 5 code. It turned out that the version used by two of the participants calculated a 170 K higher peak clad temperature compared with other versions using the same input deck. This may contribute to the differences of the upper limit of the uncertainty ranges.

Inverse operator method for solutions of nonlinear dynamical equations and some typical applications

International Nuclear Information System (INIS)

Fang Jinqing; Yao Weiguang

1993-01-01

The inverse operator method (IOM) is described briefly. We have realized the IOM for the solutions of nonlinear dynamical equations by the mathematics-mechanization (MM) with computers. They can then offer a new and powerful method applicable to many areas of physics. We have applied them successfully to study the chaotic behaviors of some nonlinear dynamical equations. As typical examples, the well-known Lorentz equation, generalized Duffing equation and two coupled generalized Duffing equations are investigated by using the IOM and the MM. The results are in good agreement with those given by Runge-Kutta method. So the IOM realized by the MM is of potential application valuable in nonlinear physics and many other fields

Application of AI methods to aircraft guidance and control

Science.gov (United States)

Hueschen, Richard M.; Mcmanus, John W.

1988-01-01

A research program for integrating artificial intelligence (AI) techniques with tools and methods used for aircraft flight control system design, development, and implementation is discussed. The application of the AI methods for the development and implementation of the logic software which operates with the control mode panel (CMP) of an aircraft is presented. The CMP is the pilot control panel for the automatic flight control system of a commercial-type research aircraft of Langley Research Center's Advanced Transport Operating Systems (ATOPS) program. A mouse-driven color-display emulation of the CMP, which was developed with AI methods and used to test the AI software logic implementation, is discussed. The operation of the CMP was enhanced with the addition of a display which was quickly developed with AI methods. The display advises the pilot of conditions not satisfied when a mode does not arm or engage. The implementation of the CMP software logic has shown that the time required to develop, implement, and modify software systems can be significantly reduced with the use of the AI methods.

Application of advanced data reduction methods to gas turbine dynamic analysis

International Nuclear Information System (INIS)

Juhl, P.B.

1978-01-01

This paper discusses the application of advanced data reduction methods to the evaluation of dynamic data from gas turbines and turbine components. The use of the Fast Fourier Transform and of real-time spectrum analyzers is discussed. The use of power spectral density and probability density functions for analyzing random data is discussed. Examples of the application of these modern techniques to gas turbine testing are presented. The use of the computer to automate the data reduction procedures is discussed. (orig.) [de

Application of laplace transform method in heavy ion reaction research

International Nuclear Information System (INIS)

Wang Jinchuan; Xi Hongfei; Guo Zhongyan; Zhan Wenlong; Zhu Yongtai; Zhou Jianqun; Liu Guanhua

1993-01-01

Laplace transform method (LTM) is applied to investigate the effects of different spectroscopy amplifiers parameters on identification of the light charged particles (LCP) emitted from 12 C(46,7 MeV/u) + 58 Ni reaction. The significance of application of LTM in heavy ion experimental nuclear physics is also discussed

Effects of application methods and species of wood on color ...

African Journals Online (AJOL)

In this study, the color effects of wood materials to coloring with different application methods (brush, roller sponge and spray gun) and waterborne varnishes were investigated according to ASTM-D 2244. For this purpose, the experimental samples of Scots pine (Pinus silvestris L.), oriental beech (Fagus orientalis L.) and ...

Splitting methods for split feasibility problems with application to Dantzig selectors

International Nuclear Information System (INIS)

He, Hongjin; Xu, Hong-Kun

2017-01-01

The split feasibility problem (SFP), which refers to the task of finding a point that belongs to a given nonempty, closed and convex set, and whose image under a bounded linear operator belongs to another given nonempty, closed and convex set, has promising applicability in modeling a wide range of inverse problems. Motivated by the increasingly data-driven regularization in the areas of signal/image processing and statistical learning, in this paper, we study the regularized split feasibility problem (RSFP), which provides a unified model for treating many real-world problems. By exploiting the split nature of the RSFP, we shall gainfully employ several efficient splitting methods to solve the model under consideration. A remarkable advantage of our methods lies in their easier subproblems in the sense that the resulting subproblems have closed-form representations or can be efficiently solved up to a high precision. As an interesting application, we apply the proposed algorithms for finding Dantzig selectors, in addition to demonstrating the effectiveness of the splitting methods through some computational results on synthetic and real medical data sets. (paper)

Application of modified homotopy perturbation method and amplitude frequency formulation to strongly nonlinear oscillators

Directory of Open Access Journals (Sweden)

seyd ghasem enayati

2017-01-01

Full Text Available In this paper, two powerful analytical methods known as modified homotopy perturbation method and Amplitude Frequency Formulation called respectively MHPM and AFF, are introduced to derive approximate solutions of a system of ordinary differential equations appear in mechanical applications. These methods convert a difficult problem into a simple one, which can be easily handled. The obtained solutions are compared with numerical fourth order runge-kutta method to show the applicability and accuracy of both MHPM and AFF in solving this sample problem. The results attained in this paper confirm the idea that MHPM and AFF are powerful mathematical tools and they can be applied to linear and nonlinear problems.

Application of an engineering inviscid-boundary layer method to slender three-dimensional vehicle forebodies

Science.gov (United States)

Riley, Christopher J.

1993-01-01

An engineering inviscid-boundary layer method has been modified for application to slender three-dimensional (3-D) forebodies which are characteristic of transatmospheric vehicles. An improved shock description in the nose region has been added to the inviscid technique which allows the calculation of a wider range of body geometries. The modified engineering method is applied to the perfect gas solution over a slender 3-D configuration at angle of attack. The method predicts surface pressures and laminar heating rates on the windward side of the vehicle that compare favorably with numerical solutions of the thin-layer Navier-Stokes equations. These improvements extend the 3-D capabilities of the engineering method and significantly increase its design applications.

Total System Performance Assessment-License Application Methods and Approach

Energy Technology Data Exchange (ETDEWEB)

J. McNeish

2002-09-13

''Total System Performance Assessment-License Application (TSPA-LA) Methods and Approach'' provides the top-level method and approach for conducting the TSPA-LA model development and analyses. The method and approach is responsive to the criteria set forth in Total System Performance Assessment Integration (TSPAI) Key Technical Issue (KTI) agreements, the ''Yucca Mountain Review Plan'' (CNWRA 2002 [158449]), and 10 CFR Part 63. This introductory section provides an overview of the TSPA-LA, the projected TSPA-LA documentation structure, and the goals of the document. It also provides a brief discussion of the regulatory framework, the approach to risk management of the development and analysis of the model, and the overall organization of the document. The section closes with some important conventions that are utilized in this document.

Uncertain multi-attribute decision making methods and applications

CERN Document Server

Xu, Zeshui

2015-01-01

This book introduces methods for uncertain multi-attribute decision making including uncertain multi-attribute group decision making and their applications to supply chain management, investment decision making, personnel assessment, redesigning products, maintenance services, military system efficiency evaluation. Multi-attribute decision making, also known as multi-objective decision making with finite alternatives, is an important component of modern decision science. The theory and methods of multi-attribute decision making have been extensively applied in engineering, economics, management and military contexts, such as venture capital project evaluation, facility location, bidding, development ranking of industrial sectors and so on. Over the last few decades, great attention has been paid to research on multi-attribute decision making in uncertain settings, due to the increasing complexity and uncertainty of supposedly objective aspects and the fuzziness of human thought. This book can be used as a ref...

On some methods in homogenization and their applications

International Nuclear Information System (INIS)

Allaire, Gregoire

1993-01-01

This report (which reproduces an 'Habilitation' thesis) is concerned with the homogenization theory which can be defined as the union of all mathematical techniques allowing to pass from a microscopic behavior to a macroscopic (or averaged, or effective) behavior of a physical phenomenon, modeled by one or several partial differential equations. Some new results are discussed, both from the point of view of methods, and from that of applications. The first chapter deals with viscous incompressible fluid flows in porous media, and, in particular, contains a derivation of Darcy and Brinkman's law. The second chapter is dedicated to the two-scale convergence method. The third chapter focus on the problem of optimal bounds for the effective properties of composite materials. Finally, in the fourth chapter the previous results are applied to the optimal design problem for elastic shapes. (author) [fr

A modified sliding spectral method and its application to COSMIC ...

Indian Academy of Sciences (India)

A modified sliding spectral method and its application to COSMIC radio occultation data 1751. The window length with 300 samples is supposed to provide a reasonable resolution. In a spherically symmetric atmosphere, the refractive index n as a function of tangent radius r0 can be computed from the bending angle α as.

Quasi-Monte Carlo methods: applications to modeling of light transport in tissue

Science.gov (United States)

Schafer, Steven A.

1996-05-01

Monte Carlo modeling of light propagation can accurately predict the distribution of light in scattering materials. A drawback of Monte Carlo methods is that they converge inversely with the square root of the number of iterations. Theoretical considerations suggest that convergence which scales inversely with the first power of the number of iterations is possible. We have previously shown that one can obtain at least a portion of that improvement by using van der Corput sequences in place of a conventional pseudo-random number generator. Here, we present our further analysis, and show that quasi-Monte Carlo methods do have limited applicability to light scattering problems. We also discuss potential improvements which may increase the applicability.

Application of acoustic radiosity methods to noise propagation within buildings

Science.gov (United States)

Muehleisen, Ralph T.; Beamer, C. Walter

2005-09-01

The prediction of sound pressure levels in rooms from transmitted sound is a difficult problem. The sound energy in the source room incident on the common wall must be accurately predicted. In the receiving room, the propagation of sound from the planar wall source must also be accurately predicted. The radiosity method naturally computes the spatial distribution of sound energy incident on a wall and also naturally predicts the propagation of sound from a planar area source. In this paper, the application of the radiosity method to sound transmission problems is introduced and explained.

Inspection of Nuclear Power Plant Structures - Overview of Methods and Related Applications

International Nuclear Information System (INIS)

Naus, Dan J.

2009-01-01

The objectives of this limited study were to provide an overview of the methods that are available for inspection of nuclear power plant reinforced concrete and metallic structures, and to provide an assessment of the status of methods that address inspection of thick, heavily-reinforced concrete and inaccessible areas of the containment metallic pressure boundary. In meeting these objectives a general description of nuclear power plant safety-related structures was provided as well as identification of potential degradation factors, testing and inspection requirements, and operating experience; methods for inspection of nuclear power plant reinforced concrete structures and containment metallic pressure boundaries were identified and described; and applications of nondestructive evaluation methods specifically related to inspection of thick-section reinforced concrete structures and inaccessible portions of containment metallic pressure boundaries were summarized. Recommendations are provided on utilization of test article(s) to further advance nondestructive evaluation methods related to thick-section, heavily-reinforced concrete and inaccessible portions of the metallic pressure boundary representative of nuclear power plant containments. Conduct of a workshop to provide an update on applications and needed developments for nondestructive evaluation of nuclear power plant structures would also be of benefit.

German competent authority guidance in FE methods applications for package design assessment

Energy Technology Data Exchange (ETDEWEB)

Voelzke, H.; Wieser, G.; Zencker, U.; Qiao Linan; Ballheimer, V. [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany)

2004-07-01

The development of new methods in analysing package designs by using the finite element method (FEM) is of increasing importance. Package designers are more and more applying the growing opportunities of numerical methods to perform safety assessments for their products which requires suited methods also for competent authorities like BAM to verify the applicants' results. This presentation gives an topical overview of the experiences and tendencies within the complex field of finite element design testing. There are at first some general and more formal aspects concerning the correct finite element program selection and documentation of modelling, material properties, boundaries and calculation results including their interpretation. To give a reliable basis to the applicants in Germany BAM has drawn up and published a Finite Element Guideline recently. Secondly, the paper discusses actual technical questions which are of a wide interest and range from mechanical reflections on cask drop and extreme impact scenarios to thermal reflections on decay heat removal and fire scenarios. Examples from BAM work on FE-development activities are shown to demonstrate the great opportunities as well as the difficulties of using finite element methods for package safety analysis and design testing.

German competent authority guidance in FE methods applications for package design assessment

International Nuclear Information System (INIS)

Voelzke, H.; Wieser, G.; Zencker, U.; Qiao Linan; Ballheimer, V.

2004-01-01

The development of new methods in analysing package designs by using the finite element method (FEM) is of increasing importance. Package designers are more and more applying the growing opportunities of numerical methods to perform safety assessments for their products which requires suited methods also for competent authorities like BAM to verify the applicants' results. This presentation gives an topical overview of the experiences and tendencies within the complex field of finite element design testing. There are at first some general and more formal aspects concerning the correct finite element program selection and documentation of modelling, material properties, boundaries and calculation results including their interpretation. To give a reliable basis to the applicants in Germany BAM has drawn up and published a Finite Element Guideline recently. Secondly, the paper discusses actual technical questions which are of a wide interest and range from mechanical reflections on cask drop and extreme impact scenarios to thermal reflections on decay heat removal and fire scenarios. Examples from BAM work on FE-development activities are shown to demonstrate the great opportunities as well as the difficulties of using finite element methods for package safety analysis and design testing

Inspection of Nuclear Power Plant Structures - Overview of Methods and Related Applications

Energy Technology Data Exchange (ETDEWEB)

Naus, Dan J [ORNL

2009-05-01

The objectives of this limited study were to provide an overview of the methods that are available for inspection of nuclear power plant reinforced concrete and metallic structures, and to provide an assessment of the status of methods that address inspection of thick, heavily-reinforced concrete and inaccessible areas of the containment metallic pressure boundary. In meeting these objectives a general description of nuclear power plant safety-related structures was provided as well as identification of potential degradation factors, testing and inspection requirements, and operating experience; methods for inspection of nuclear power plant reinforced concrete structures and containment metallic pressure boundaries were identified and described; and applications of nondestructive evaluation methods specifically related to inspection of thick-section reinforced concrete structures and inaccessible portions of containment metallic pressure boundaries were summarized. Recommendations are provided on utilization of test article(s) to further advance nondestructive evaluation methods related to thick-section, heavily-reinforced concrete and inaccessible portions of the metallic pressure boundary representative of nuclear power plant containments. Conduct of a workshop to provide an update on applications and needed developments for nondestructive evaluation of nuclear power plant structures would also be of benefit.

New methods and applications in emission spectroscopy (1960)

International Nuclear Information System (INIS)

Baudin, G.

1960-01-01

Emission spectroscopy, are already well-established instrumental analytical technique, has in recent years known important developments. Two mains factors are responsible; firstly the demands of metallurgy for purer and purer materials or alloys which are increasingly complex and difficult to analyse by chemical means; secondly, progress in optics, especially in the production of gratings, and in electronics in the field of photomultiplier tubes. We will not here catalogue all the new applications and methods, but we will consider a few amongst the most representative outside the conventional field. (author) [fr

Effects of nitrogen application method and weed control on corn yield and yield components.

Science.gov (United States)

Sepahvand, Pariya; Sajedi, Nurali; Mousavi, Seyed Karim; Ghiasvand, Mohsen

2014-04-01

The effects of nitrogen fertilizer application and different methods for weed control on yield and yield components of corn was evaluated in Khorramabad in 2011. The experiment was conducted as a split plot based on randomized complete block design in 3 replications. Nitrogen application was as main plot in 4 levels (no nitrogen, broadcasting nitrogen, banding nitrogen and sprayed nitrogen) and methods of weed control were in 4 levels (non-control weeds, application Equip herbicide, once hand control of weeds and application Equip herbicide+once time weeding) was as subplots. Result illustrated that effects of nitrogen fertilizer application were significant on grain and forage yield, 100 seeds weight, harvest index, grain number per row and cob weight per plant. Grain yield increased by 91.4 and 3.9% in application banding and broadcasting for nitrogen fertilizer, respectively, compared to the no fertilizer treatment. The results show improved efficiency of nitrogen utilization by banding application. Grain yield, harvest index, seed rows per cob, seeds per row and cob weight were increased by weed control. In the application of Equip herbicide+ hand weeding treatment corn grain yield was increased 126% in comparison to weedy control. It represents of the intense affects of weed competition with corn. The highest corn grain yield (6758 kg h(-1)) was related to the application banding of nitrogen fertilizer and Equip herbicide+once hand weeding.

Maximizing Product Innovation through Adaptive Application of User-Centered Methods for Defining Customer Value

Directory of Open Access Journals (Sweden)

Tonje Overvik Olsen

2011-12-01

Full Text Available Establishing deep understanding of customers is a prerequisite to improve success rates of innovations under today’s transient business conditions. This paper summarizes methods and tools to increase customer understanding in new product development. A case study of developing an office chair was conducted, utilizing four such methods (web based survey, interview, observation and workshops to provide directions for later application. Results indicate that methods revealing emotionally-related customer information (workshops and observation are resource-intensive and provide less amount of information directly applicable to the product development team. The opposite is the case for methods providing more functionally-related information (web based survey and interview. The overall conclusion is that the latter methods are more suitable for product improvements, while the former may provide valuable information for creating more differentiated products.

Setting health research priorities using the CHNRI method: VII. A review of the first 50 applications of the CHNRI method.

Science.gov (United States)

Rudan, Igor; Yoshida, Sachiyo; Chan, Kit Yee; Sridhar, Devi; Wazny, Kerri; Nair, Harish; Sheikh, Aziz; Tomlinson, Mark; Lawn, Joy E; Bhutta, Zulfiqar A; Bahl, Rajiv; Chopra, Mickey; Campbell, Harry; El Arifeen, Shams; Black, Robert E; Cousens, Simon

2017-06-01

Several recent reviews of the methods used to set research priorities have identified the CHNRI method (acronym derived from the "Child Health and Nutrition Research Initiative") as an approach that clearly became popular and widely used over the past decade. In this paper we review the first 50 examples of application of the CHNRI method, published between 2007 and 2016, and summarize the most important messages that emerged from those experiences. We conducted a literature review to identify the first 50 examples of application of the CHNRI method in chronological order. We searched Google Scholar, PubMed and so-called grey literature. Initially, between 2007 and 2011, the CHNRI method was mainly used for setting research priorities to address global child health issues, although the first cases of application outside this field (eg, mental health, disabilities and zoonoses) were also recorded. Since 2012 the CHNRI method was used more widely, expanding into the topics such as adolescent health, dementia, national health policy and education. The majority of the exercises were focused on issues that were only relevant to low- and middle-income countries, and national-level applications are on the rise. The first CHNRI-based articles adhered to the five recommended priority-setting criteria, but by 2016 more than two-thirds of all conducted exercises departed from recommendations, modifying the CHNRI method to suit each particular exercise. This was done not only by changing the number of criteria used, but also by introducing some entirely new criteria (eg, "low cost", "sustainability", "acceptability", "feasibility", "relevance" and others). The popularity of the CHNRI method in setting health research priorities can be attributed to several key conceptual advances that have addressed common concerns. The method is systematic in nature, offering an acceptable framework for handling many research questions. It is also transparent and replicable, because it

Application of improved topsis method to comprehensive assessment of radiological environmental quality

International Nuclear Information System (INIS)

Shi Dongsheng; Di Yuming; Zhou Chunlin

2007-01-01

TOPSIS is a method for multiobjective decision-making, which can be applied to comprehensive assessment of radiological environmental quality. This paper introduces the principle of TOPSIS method and sets up the model of improved TOPSIS method, discusses the application of improved TOPSIS method to comprehensive assessment of radiological environmental quality. This method sufficiently makes use of the information of the optimal matrix. Analysis of practical examples using MATLAB program shows that it is objectively reasonable and feasible to comprehensively assess radiological environmental quality by improved TOPSIS method. This paper also provides the result of optimum number of sites and compares it with optimal index method based on TOPSIS method and traditional method. (authors)

NDT method in determining the rate of corrosion applicable to risk based inspection

International Nuclear Information System (INIS)

Mohamed Hairul Hasmoni; Mohamad Pauzi Ismail; Ab Razak Hamzah

2004-01-01

Corrosion is a major problem in oil and gas industries, refineries and chemical process plants as the equipment is often exposed to corrosive environments or elevated temperature. Important equipment need to operate safely and reliably to avoid injuries to personnel and the public, and to prevent loss time and cost incurred due to loss of production and shutdown. The paper assess the approach in evaluating the technique of non-destructive testing (NDT) using Ultrasonic Testing (UT) in determining the rate of corrosion and remaining life of equipment applicable to Risk Based Inspection (RBI). Methods in determining the corrosion rate are presented using analytical method. Examples and data from MINT chiller water pipeline are presented to illustrate the application of these methods. (Author)

Application of virtual reality methods to obesity prevention and management research.

Science.gov (United States)

Persky, Susan

2011-03-01

There is a great need for empirical evidence to inform clinical prevention and management of overweight and obesity. Application of virtual reality (VR) methods to this research agenda could present considerable advantages. Use of VR methods in basic and applied obesity prevention and treatment research is currently extremely limited. However, VR has been employed for social and behavioral research in many other domains where it has demonstrated validity and utility. Advantages of VR technologies as research tools include the ability to situate hypothetical research scenarios in realistic settings, tight experimental control inherent in virtual environments, the ability to manipulate and control any and all scenario elements, and enhanced behavioral measurement opportunities. The means by which each of these features could enhance obesity prevention and management research is discussed and illustrated in the context of an example research study. Challenges associated with the application of VR methods, such as technological limitations and cost, are also considered. By employing experimental VR methods to interrogate clinical encounters and other health-related situations, researchers may be able to elucidate causal relationships, strengthen theoretical models, and identify potential targets for intervention. In so doing, researchers stand to make important contributions to evidence-based practice innovation in weight management and obesity prevention. © 2011 Diabetes Technology Society.

Advances in the application of genetic manipulation methods to apicomplexan parasites.

Science.gov (United States)

Suarez, C E; Bishop, R P; Alzan, H F; Poole, W A; Cooke, B M

2017-10-01

Apicomplexan parasites such as Babesia, Theileria, Eimeria, Cryptosporidium and Toxoplasma greatly impact animal health globally, and improved, cost-effective measures to control them are urgently required. These parasites have complex multi-stage life cycles including obligate intracellular stages. Major gaps in our understanding of the biology of these relatively poorly characterised parasites and the diseases they cause severely limit options for designing novel control methods. Here we review potentially important shared aspects of the biology of these parasites, such as cell invasion, host cell modification, and asexual and sexual reproduction, and explore the potential of the application of relatively well-established or newly emerging genetic manipulation methods, such as classical transfection or gene editing, respectively, for closing important gaps in our knowledge of the function of specific genes and proteins, and the biology of these parasites. In addition, genetic manipulation methods impact the development of novel methods of control of the diseases caused by these economically important parasites. Transient and stable transfection methods, in conjunction with whole and deep genome sequencing, were initially instrumental in improving our understanding of the molecular biology of apicomplexan parasites and paved the way for the application of the more recently developed gene editing methods. The increasingly efficient and more recently developed gene editing methods, in particular those based on the CRISPR/Cas9 system and previous conceptually similar techniques, are already contributing to additional gene function discovery using reverse genetics and related approaches. However, gene editing methods are only possible due to the increasing availability of in vitro culture, transfection, and genome sequencing and analysis techniques. We envisage that rapid progress in the development of novel gene editing techniques applied to apicomplexan parasites of

Application of the B.F.S. Method to Metallic Surfaces: Surface Alloys and Alloy Surfaces

International Nuclear Information System (INIS)

Bozzolo, Gullermo

1997-01-01

These notes introduce the BFS (Bozzolo-Ferrante-Smith) method for alloys, in the framework of what is available today in terms of computationally efficient and physically sound techniques for modeling of atomic systems. The BFS method belongs to the family of semi-empirical methods, which aim to balance scientific rigour with practical applications. The goal is to provide a tool that aids in the process of material analysis and development, supplementing the experimental work which by itself has limitations in terms of time, money, technology and human resources. One of the main advantages of the BFS method, basically tailored to assist in the problem of alloy design, is that it is easily applicable to the analysis of surface structure, with a satisfactory degree of accuracy. In these notes, first the role of semiempirical methods among the available tools for atomistic simulations is reviewed, followed by a description of the BFS method and a simple application in order to understand the operational procedure, and conclude reviewing some of the topics of current interest where techniques such as the BFS method play an important role in furthering the understanding os fundamental issues

Development of medical application methods using radiation. Radionuclide therapy

International Nuclear Information System (INIS)

Choi, Chang Woon; Lim, S. M.; Kim, E.H.; Woo, K. S.; Chung, W. S.; Lim, S. J.; Choi, T. H.; Hong, S. W.; Chung, H. Y.; No, W. C.; Oh, B. H.; Hong, H. J.

1999-04-01

In this project, we studied following subjects: 1. development of monoclonal antibodies and radiopharmaceuticals 2. clinical applications of radionuclide therapy 3. radioimmunoguided surgery 4. prevention of restenosis with intracoronary radiation. The results can be applied for the following objectives: 1) radionuclide therapy will be applied in clinical practice to treat the cancer patients or other diseases in multi-center trial. 2) The newly developed monoclonal antibodies and biomolecules can be used in biology, chemistry or other basic life science research. 3) The new methods for the analysis of therapeutic effects, such as dosimetry, and quantitative analysis methods of radioactivity, can be applied in basic research, such as radiation oncology and radiation biology

Time series analysis methods and applications for flight data

CERN Document Server

Zhang, Jianye

2017-01-01

This book focuses on different facets of flight data analysis, including the basic goals, methods, and implementation techniques. As mass flight data possesses the typical characteristics of time series, the time series analysis methods and their application for flight data have been illustrated from several aspects, such as data filtering, data extension, feature optimization, similarity search, trend monitoring, fault diagnosis, and parameter prediction, etc. An intelligent information-processing platform for flight data has been established to assist in aircraft condition monitoring, training evaluation and scientific maintenance. The book will serve as a reference resource for people working in aviation management and maintenance, as well as researchers and engineers in the fields of data analysis and data mining.

Development of medical application methods using radiation. Radionuclide therapy

Energy Technology Data Exchange (ETDEWEB)

Choi, Chang Woon; Lim, S. M.; Kim, E.H.; Woo, K. S.; Chung, W. S.; Lim, S. J.; Choi, T. H.; Hong, S. W.; Chung, H. Y.; No, W. C. [Korea Atomic Energy Research Institute. Korea Cancer Center Hospital, Seoul, (Korea, Republic of); Oh, B. H. [Seoul National University. Hospital, Seoul (Korea, Republic of); Hong, H. J. [Antibody Engineering Research Unit, Taejon (Korea, Republic of)

1999-04-01

In this project, we studied following subjects: 1. development of monoclonal antibodies and radiopharmaceuticals 2. clinical applications of radionuclide therapy 3. radioimmunoguided surgery 4. prevention of restenosis with intracoronary radiation. The results can be applied for the following objectives: (1) radionuclide therapy will be applied in clinical practice to treat the cancer patients or other diseases in multi-center trial. (2) The newly developed monoclonal antibodies and biomolecules can be used in biology, chemistry or other basic life science research. (3) The new methods for the analysis of therapeutic effects, such as dosimetry, and quantitative analysis methods of radioactivity, can be applied in basic research, such as radiation oncology and radiation biology.

Generalization of mixed multiscale finite element methods with applications

Energy Technology Data Exchange (ETDEWEB)

Lee, C S [Texas A & M Univ., College Station, TX (United States)

2016-08-01

Many science and engineering problems exhibit scale disparity and high contrast. The small scale features cannot be omitted in the physical models because they can affect the macroscopic behavior of the problems. However, resolving all the scales in these problems can be prohibitively expensive. As a consequence, some types of model reduction techniques are required to design efficient solution algorithms. For practical purpose, we are interested in mixed finite element problems as they produce solutions with certain conservative properties. Existing multiscale methods for such problems include the mixed multiscale finite element methods. We show that for complicated problems, the mixed multiscale finite element methods may not be able to produce reliable approximations. This motivates the need of enrichment for coarse spaces. Two enrichment approaches are proposed, one is based on generalized multiscale finte element metthods (GMsFEM), while the other is based on spectral element-based algebraic multigrid (rAMGe). The former one, which is called mixed GMsFEM, is developed for both Darcy’s flow and linear elasticity. Application of the algorithm in two-phase flow simulations are demonstrated. For linear elasticity, the algorithm is subtly modified due to the symmetry requirement of the stress tensor. The latter enrichment approach is based on rAMGe. The algorithm differs from GMsFEM in that both of the velocity and pressure spaces are coarsened. Due the multigrid nature of the algorithm, recursive application is available, which results in an efficient multilevel construction of the coarse spaces. Stability, convergence analysis, and exhaustive numerical experiments are carried out to validate the proposed enrichment approaches. iii

Complex networks principles, methods and applications

CERN Document Server

Latora, Vito; Russo, Giovanni

2017-01-01

Networks constitute the backbone of complex systems, from the human brain to computer communications, transport infrastructures to online social systems and metabolic reactions to financial markets. Characterising their structure improves our understanding of the physical, biological, economic and social phenomena that shape our world. Rigorous and thorough, this textbook presents a detailed overview of the new theory and methods of network science. Covering algorithms for graph exploration, node ranking and network generation, among the others, the book allows students to experiment with network models and real-world data sets, providing them with a deep understanding of the basics of network theory and its practical applications. Systems of growing complexity are examined in detail, challenging students to increase their level of skill. An engaging presentation of the important principles of network science makes this the perfect reference for researchers and undergraduate and graduate students in physics, ...

Application of photonuclear methods of analysis in biology, medicine, ecological studies

International Nuclear Information System (INIS)

Burmistenko, Yu.N.

1986-01-01

Examples of application of photonuclear methods of analysis (PhMA) of the substance composition in biology, medicine, ecology are considered. The methods for determining the element composition of soft and bone tissues, blood, urine are developed. The results of studying the limits of determination of different elements are presented. In ecological investigations PhMA is applied for studying the composition of atmospheric aerosols, industrial sewage, canalization wastes, pollution of soil, plants, animals with toxic elements

The sixth Nordic conference on the application of scientific methods in archaeology

International Nuclear Information System (INIS)

1993-01-01

The Sixth Nordic Conference on the Application of Scientific Methods in Archaeology with 73 participants was convened in Esbjerg (Denmark), 19-23 September 1993. Isotope dating of archaeological, paleoecological and geochronological objects, neutron activation and XRF analytical methods, magnetometry, thermoluminescence etc. have been discussed. The program included excursions to archaeological sites and a poster session with 12 posters. (EG)

Thermochemical Fragment Energy Method for Biomolecules: Application to a Collagen Model Peptide.

Science.gov (United States)

Suárez, Ernesto; Díaz, Natalia; Suárez, Dimas

2009-06-09

Herein, we first review different methodologies that have been proposed for computing the quantum mechanical (QM) energy and other molecular properties of large systems through a linear combination of subsystem (fragment) energies, which can be computed using conventional QM packages. Particularly, we emphasize the similarities among the different methods that can be considered as variants of the multibody expansion technique. Nevertheless, on the basis of thermochemical arguments, we propose yet another variant of the fragment energy methods, which could be useful for, and readily applicable to, biomolecules using either QM or hybrid quantum mechanical/molecular mechanics methods. The proposed computational scheme is applied to investigate the stability of a triple-helical collagen model peptide. To better address the actual applicability of the fragment QM method and to properly compare with experimental data, we compute average energies by carrying out single-point fragment QM calculations on structures generated by a classical molecular dynamics simulation. The QM calculations are done using a density functional level of theory combined with an implicit solvent model. Other free-energy terms such as attractive dispersion interactions or thermal contributions are included using molecular mechanics. The importance of correcting both the intermolecular and intramolecular basis set superposition error (BSSE) in the QM calculations is also discussed in detail. On the basis of the favorable comparison of our fragment-based energies with experimental data and former theoretical results, we conclude that the fragment QM energy strategy could be an interesting addition to the multimethod toolbox for biomolecular simulations in order to investigate those situations (e.g., interactions with metal clusters) that are beyond the range of applicability of common molecular mechanics methods.

Total System Performance Assessment - License Application Methods and Approach

International Nuclear Information System (INIS)

McNeish, J.

2003-01-01

''Total System Performance Assessment-License Application (TSPA-LA) Methods and Approach'' provides the top-level method and approach for conducting the TSPA-LA model development and analyses. The method and approach is responsive to the criteria set forth in Total System Performance Assessment Integration (TSPAI) Key Technical Issues (KTIs) identified in agreements with the U.S. Nuclear Regulatory Commission, the ''Yucca Mountain Review Plan'' (YMRP), ''Final Report'' (NRC 2003 [163274]), and the NRC final rule 10 CFR Part 63 (NRC 2002 [156605]). This introductory section provides an overview of the TSPA-LA, the projected TSPA-LA documentation structure, and the goals of the document. It also provides a brief discussion of the regulatory framework, the approach to risk management of the development and analysis of the model, and the overall organization of the document. The section closes with some important conventions that are used in this document

CRKSPH: A new meshfree hydrodynamics method with applications to astrophysics

Science.gov (United States)

Owen, John Michael; Raskin, Cody; Frontiere, Nicholas

2018-01-01

The study of astrophysical phenomena such as supernovae, accretion disks, galaxy formation, and large-scale structure formation requires computational modeling of, at a minimum, hydrodynamics and gravity. Developing numerical methods appropriate for these kinds of problems requires a number of properties: shock-capturing hydrodynamics benefits from rigorous conservation of invariants such as total energy, linear momentum, and mass; lack of obvious symmetries or a simplified spatial geometry to exploit necessitate 3D methods that ideally are Galilean invariant; the dynamic range of mass and spatial scales that need to be resolved can span many orders of magnitude, requiring methods that are highly adaptable in their space and time resolution. We have developed a new Lagrangian meshfree hydrodynamics method called Conservative Reproducing Kernel Smoothed Particle Hydrodynamics, or CRKSPH, in order to meet these goals. CRKSPH is a conservative generalization of the meshfree reproducing kernel method, combining the high-order accuracy of reproducing kernels with the explicit conservation of mass, linear momentum, and energy necessary to study shock-driven hydrodynamics in compressible fluids. CRKSPH's Lagrangian, particle-like nature makes it simple to combine with well-known N-body methods for modeling gravitation, similar to the older Smoothed Particle Hydrodynamics (SPH) method. Indeed, CRKSPH can be substituted for SPH in existing SPH codes due to these similarities. In comparison to SPH, CRKSPH is able to achieve substantially higher accuracy for a given number of points due to the explicitly consistent (and higher-order) interpolation theory of reproducing kernels, while maintaining the same conservation principles (and therefore applicability) as SPH. There are currently two coded implementations of CRKSPH available: one in the open-source research code Spheral, and the other in the high-performance cosmological code HACC. Using these codes we have applied

Evaluation of Propiconazole Application Methods for Control of Oak Wilt in Texas Live Oaks

Science.gov (United States)

A. Dan Wilson; D.G. Lester

1996-01-01

Four fungicide application methods using the microencapsulated (blue) 14.3% EC formulation of propiconazole (Alamo), including a low-concentration high volume method, two high-concentration low volume microinjection methods, and a low-concentration intermediate volume soil drench method, were tested for effectiveness in controlling oak wilt in a mature natural stand of...

Application of Computer-Assisted Learning Methods in the Teaching of Chemical Spectroscopy.

Science.gov (United States)

Ayscough, P. B.; And Others

1979-01-01

Discusses the application of computer-assisted learning methods to the interpretation of infrared, nuclear magnetic resonance, and mass spectra; and outlines extensions into the area of integrated spectroscopy. (Author/CMV)

Application of distinct element method of toppling failure of slope

International Nuclear Information System (INIS)

Ishida, Tsuyoshi; Hibino, Satoshi; Kitahara, Yoshihiro; Ito, Hiroshi

1984-01-01

The authors have pointed out, in the latest report, that DEM (Distinct Element Method) seems to be a very helpful numerical method to examine the stability of fissured rock slopes, in which toppling failure would occur during earthquakes. In this report, the applicability of DEM for such rock slopes is examined through the following comparisons between theoretical results and DEM results, referring Voegele's works (1982): (1) Stability of one block on a slope. (2) Failure of a rock block column composed of 10 same size rectangular blocks. (3) Cable force required to make a slope stable. Through above 3 comparisons, it seems that DEM give the reasonable results. Considering that these problems may not be treated by the other numerical methods such as FEM and so on, so DEM seems to be a very useful method for fissured rock slope analysis. (author)

Statistical analysis with measurement error or misclassification strategy, method and application

CERN Document Server

Yi, Grace Y

2017-01-01

This monograph on measurement error and misclassification covers a broad range of problems and emphasizes unique features in modeling and analyzing problems arising from medical research and epidemiological studies. Many measurement error and misclassification problems have been addressed in various fields over the years as well as with a wide spectrum of data, including event history data (such as survival data and recurrent event data), correlated data (such as longitudinal data and clustered data), multi-state event data, and data arising from case-control studies. Statistical Analysis with Measurement Error or Misclassification: Strategy, Method and Application brings together assorted methods in a single text and provides an update of recent developments for a variety of settings. Measurement error effects and strategies of handling mismeasurement for different models are closely examined in combination with applications to specific problems. Readers with diverse backgrounds and objectives can utilize th...

Studies and applications of neutron radiography with film methods

International Nuclear Information System (INIS)

Ikeda, Yasushi

1989-01-01

Neutron radiography has been studied with film methods and applied to some industrial applications. The film methods include not only conventional silver-halide emulsion films, such as industrial, medical or soft X-ray ones, but also track-etch films and those for indirect methods. The characteristics of the film methods are analyzed and investigated with using various image converters, such as gadolinium metal foil and evaporation films, or some scintillation converters such as NE426. The sensitivities and MTFs for various sets of films and converters have been obtained, which gives a chart of the correlation between the appropriate exposure and resolving powers for them. From the chart, one can select some proper sets for the purpose and given conditions of neutron radiography facilities. The film methods have been applied to inspect very fine cracks in thick steel blocks and plates. It is also applied to observe nuclear fuel pellets or irradiated nuclear fuel pins. Furthermore, the film method has been used for neutron computed tomography. Very fine Eu-particles in TiO pellets, which diameters are nearly 300 micron, can be reconstructed by the neutron CT. The fine neutron CT will be useful for the inspection of Pu-particles in mixed oxide nuclear fuel pellets for future advance nuclear reactors. (author)

Application of the Method of Direct Solidification for Obtaining New Materials

International Nuclear Information System (INIS)

Grankin, S.S.

2007-01-01

The influence of the method of direct solidification on the formation of the material structure has been considered. The main methods of single crystal growth have been described. A considerable influence of the crystal growth parameters (temperature gradient at the front of solidification and the speed of moving of the front of solidification) on the type of the structure and morphology of single crystals has been shown. The examples of application of the method of direct solidification in experimental and industrial production are showed: production of directly crystallized blades for turbines of nuclear power plants and gas-turbine engines

Influence of application method on surface free-energy and bond strength of universal adhesive systems to enamel.

Science.gov (United States)

Imai, Arisa; Takamizawa, Toshiki; Sai, Keiichi; Tsujimoto, Akimasa; Nojiri, Kie; Endo, Hajime; Barkmeier, Wayne W; Latta, Mark A; Miyazaki, Masashi

2017-10-01

The aim of the present study was to determine the influence of different adhesive application methods and etching modes on enamel bond effectiveness of universal adhesives using shear bond strength (SBS) testing and surface free-energy (SFE) measurements. The adhesives Scotchbond Universal, All-Bond Universal, Adhese Universal, and G-Premio Bond were used. Prepared bovine enamel specimens were divided into four groups, based on type of adhesive, and subjected to the following surface treatments: (i) total-etch mode with active application; (ii) total-etch mode with inactive application; (iii) self-etch mode with active application; and (iv) self-etch mode with inactive application. Bonded specimens were subjected to SBS testing. The SFE of the enamel surfaces with adhesive was measured after rinsing with acetone and water. The SBS values in total-etch mode were significantly higher than those in self-etch mode. In total-etch mode, significantly lower SBS values were observed with active application compared with inactive application; in contrast, in self-etch mode there were no significant differences in SBS between active and inactive applications. A reduction in total SFE was observed for active application compared with inactive application. The interaction between etching mode and application method was statistically significant, and the application method significantly affected enamel bond strength in total-etch mode. © 2017 Eur J Oral Sci.

Application of status uncertainty analysis methods for AP1000 LBLOCA calculation

International Nuclear Information System (INIS)

Zhang Shunxiang; Liang Guoxing

2012-01-01

Parameter uncertainty analysis is developed by using the reasonable method to establish the response relations between input parameter uncertainties and output uncertainties. The application of the parameter uncertainty analysis makes the simulation of plant state more accuracy and improves the plant economy with reasonable security assurance. The AP1000 LBLOCA was analyzed in this paper and the results indicate that the random sampling statistical analysis method, sensitivity analysis numerical method and traditional error propagation analysis method can provide quite large peak cladding temperature (PCT) safety margin, which is much helpful for choosing suitable uncertainty analysis method to improve the plant economy. Additionally, the random sampling statistical analysis method applying mathematical statistics theory makes the largest safety margin due to the reducing of the conservation. Comparing with the traditional conservative bounding parameter analysis method, the random sampling method can provide the PCT margin of 100 K, while the other two methods can only provide 50-60 K. (authors)

Accurate 3D Localization Method for Public Safety Applications in Vehicular Ad-hoc Networks

KAUST Repository

Ansari, Abdul Rahim

2018-04-10

Vehicular ad hoc networks (VANETs) represent a very promising research area because of their ever increasing demand, especially for public safety applications. In VANETs vehicles communicate with each other to exchange road maps and traffic information. In many applications, location-based services are the main service, and localization accuracy is the main problem. VANETs also require accurate vehicle location information in real time. To fulfill this requirement, a number of algorithms have been proposed; however, the location accuracy required for public safety applications in VANETs has not been achieved. In this paper, an improved subspace algorithm is proposed for time of arrival (TOA) measurements in VANETs localization. The proposed method gives a closed-form solution and it is robust for large measurement noise, as it is based on the eigen form of a scalar product and dimensionality. Furthermore, we developed the Cramer-Rao Lower Bound (CRLB) to evaluate the performance of the proposed 3D VANETs localization method. The performance of the proposed method was evaluated by comparison with the CRLB and other localization algorithms available in the literature through numerous simulations. Simulation results show that the proposed 3D VANETs localization method is better than the literature methods especially for fewer anchors at road side units and large noise variance.

Quantification of Strategic Plans Through the Business Budget: A Practical Application Using Stochastic Methods

Directory of Open Access Journals (Sweden)

Marino Luiz Eyerkaufer

2014-12-01

Full Text Available Traditionally, the process of estimating the quantitative predictions of the strategic plan through the budget happens as from the deterministic data, together with analysis of factors of internal and external environments. As from the budget data decisions are made, often before the fact, which creates uncertainty as to the assertiveness of forecasts. Combined with the traditional preparation methods of corporate budget forecasts, this study presents an application of stochastic methods where the probabilism is presented as an alternative for the minimization of uncertainties related to the assertiveness of the estimates. It also demonstrates itself, as from a practical application, the use of the Monte Carlo method in the sales forecasting; at the same time it is tested the probability of these sales forecasting be materialized within certain intervals that meet the investors’ expectations, by using the limit central theorem and, finally, by using the absorbing Markov chain, it is demonstrated the overall performance of the system as from the funds input and output. The study was limited to a basic application of stochastic methods as from a hypothetical case which, however, allowed to  conclude that both methods, together or separately, can minimize the effects of uncertainty in budget forecasts.

Application of nuclear theory methods to new family of fermi systems

International Nuclear Information System (INIS)

Nesterenko, V.O.

1995-01-01

Application of nuclear theory methods to the description of the properties of the new family of small Fermi systems (metal clusters, fullerenes, helium clusters and quantum dots) is briefly reviewed. The main attention is paid to giant resonances in these systems. 52 refs., 7 figs

Domestication of smartphones and mobile applications: A quantitative mixed-method study

NARCIS (Netherlands)

de Reuver, G.A.; Nikou, S; Bouwman, W.A.G.A.

2016-01-01

Smartphones are finding their way into our daily lives. This paper examines the domestication of smartphones by looking at how the way we use mobile applications affects our everyday routines. Data is collected through an innovative quantitative mixed-method approach, combining log data from

An application of the eddy-current method for inspections of austenitic cladding

International Nuclear Information System (INIS)

Kubis, S.; Herka, M.; Krajcovic, R.

1999-01-01

The application of the eddy-current method for inspections of austenitic cladding by means of pancake probes. Phase and amplitude characteristics of artificial defects and anticipated interference signals. Optimization of inspection parameters

Preliminary application of maximum likelihood method in HL-2A Thomson scattering system

International Nuclear Information System (INIS)

Yao Ke; Huang Yuan; Feng Zhen; Liu Chunhua; Li Enping; Nie Lin

2010-01-01

Maximum likelihood method to process the data of HL-2A Thomson scattering system is presented. Using mathematical statistics, this method maximizes the possibility of the likeness between the theoretical data and the observed data, so that we could get more accurate result. It has been proved to be applicable in comparison with that of the ratios method, and some of the drawbacks in ratios method do not exist in this new one. (authors)

Application of Patterson-function direct methods to materials characterization.

Science.gov (United States)

Rius, Jordi

2014-09-01

The aim of this article is a general description of the so-called Patterson-function direct methods (PFDM), from their origin to their present state. It covers a 20-year period of methodological contributions to crystal structure solution, most of them published in Acta Crystallographica Section A. The common feature of these variants of direct methods is the introduction of the experimental intensities in the form of the Fourier coefficients of origin-free Patterson-type functions, which allows the active use of both strong and weak reflections. The different optimization algorithms are discussed and their performances compared. This review focuses not only on those PFDM applications related to powder diffraction data but also on some recent results obtained with electron diffraction tomography data.

Application of Patterson-function direct methods to materials characterization

Directory of Open Access Journals (Sweden)

Jordi Rius

2014-09-01

Full Text Available The aim of this article is a general description of the so-called Patterson-function direct methods (PFDM, from their origin to their present state. It covers a 20-year period of methodological contributions to crystal structure solution, most of them published in Acta Crystallographica Section A. The common feature of these variants of direct methods is the introduction of the experimental intensities in the form of the Fourier coefficients of origin-free Patterson-type functions, which allows the active use of both strong and weak reflections. The different optimization algorithms are discussed and their performances compared. This review focuses not only on those PFDM applications related to powder diffraction data but also on some recent results obtained with electron diffraction tomography data.

A Comparison of Traditional Worksheet and Linear Programming Methods for Teaching Manure Application Planning.

Science.gov (United States)

Schmitt, M. A.; And Others

1994-01-01

Compares traditional manure application planning techniques calculated to meet agronomic nutrient needs on a field-by-field basis with plans developed using computer-assisted linear programming optimization methods. Linear programming provided the most economical and environmentally sound manure application strategy. (Contains 15 references.) (MDH)

Applications of radioactive methods in cement concrete testing

International Nuclear Information System (INIS)

Dinakaran, M.; Vijayaraghavan, S.R.

1979-01-01

Basic principles regarding the neutron moderation technique and the successful application of this technique for determining the moisture and cement content in hardened concrete are briefly discussed. Since fast neutrons are converted into slow thermal neutrons by elastic scattering in the presence of hydrogen nuclei, it is possible to determine the moisture content in hardened cement concrete using precalibrated relationships. Also since most of the hydrogenous matter in concrete pertains to non-fixed water and hydrated cement compounds, an analysis of slow neutron counts on a sample at different non-fixed moisture contents make the estimation of cement content possible using the mathematical relationship between cement content, degree of hydration and the equivalent moisture content. The method developed is quick, non-destructive, and repeatable at the same time giving better accuracy when compared to conventional chemical methods. Use was also made of gamma ray transmission method for determining the differential density at various depths in a cement concrete pavement making use of cores cut from the pavement. Further, development proposed for determination of density at different depths of pavement in situ is also discussed. (auth.)

Interval-Censored Time-to-Event Data Methods and Applications

CERN Document Server

Chen, Ding-Geng

2012-01-01

Interval-Censored Time-to-Event Data: Methods and Applications collects the most recent techniques, models, and computational tools for interval-censored time-to-event data. Top biostatisticians from academia, biopharmaceutical industries, and government agencies discuss how these advances are impacting clinical trials and biomedical research. Divided into three parts, the book begins with an overview of interval-censored data modeling, including nonparametric estimation, survival functions, regression analysis, multivariate data analysis, competing risks analysis, and other models for interva

Speaker Linking and Applications using Non-Parametric Hashing Methods

Science.gov (United States)

2016-09-08

nonparametric estimate of a multivariate density function,” The Annals of Math- ematical Statistics , vol. 36, no. 3, pp. 1049–1051, 1965. [9] E. A. Patrick...Speaker Linking and Applications using Non-Parametric Hashing Methods† Douglas Sturim and William M. Campbell MIT Lincoln Laboratory, Lexington, MA...with many approaches [1, 2]. For this paper, we focus on using i-vectors [2], but the methods apply to any embedding. For the task of speaker QBE and

Application of the geophysical and geochemical methods to the research for uranium; Application a la recherche de l'uranium des methodes geophysiques et geochimiques

Energy Technology Data Exchange (ETDEWEB)

Gangloff, A M; Collin, C R; Grimbert, A; Sanselme, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

Since 1954, at the Commissariat a l'energie atomique, geophysics and geochemistry have been added to routine geological surveying and radiometric observations. Geophysical prospecting reveals the tectonic structures linked with French uranium deposits and gives an idea of favorable zones. Geochemistry adds to the geophysical indirect methods further details on the distribution of uranium traces in the soils. This method is direct and specific. Uranium assay in waters and alluvial deposits find its use in preliminary exploration. (author) [French] Depuis 1954, au CEA, a l'observation geologique directe et aux mesures radiometriques, sont venues s'ajouter des methodes relevant de la geophysique et de la geochimie. La prospection geophysique apporte des precisions sur les structures tectoniques auxquelles sont lies les gisements d'uranium fran is et sur la notion de zones favorables. Aux methodes indirectes de la geophysique, la prospection geochimique ajoute des precisions sur la repartition de l'uranium en traces dans les sols, cette methode est directe et specifique. Le dosage de l'uranium dans les eaux et les alluvions trouve son application dans la prospection de reconnaissance. (auteur)

Licensing in BE system code calculations. Applications and uncertainty evaluation by CIAU method

International Nuclear Information System (INIS)

Petruzzi, Alessandro; D'Auria, Francesco

2007-01-01

The evaluation of uncertainty constitutes the necessary supplement of Best Estimate (BE) calculations performed to understand accident scenarios in water cooled nuclear reactors. The needs come from the imperfection of computational tools on the one side and from the interest in using such tool to get more precise evaluation of safety margins. In the present paper the approaches to uncertainty are outlined and the CIAU (Code with capability of Internal Assessment of Uncertainty) method proposed by the University of Pisa is described including ideas at the basis and results from applications. Two approaches are distinguished that are characterized as 'propagation of code input uncertainty' and 'propagation of code output errors'. For both methods, the thermal-hydraulic code is at the centre of the process of uncertainty evaluation: in the former case the code itself is adopted to compute the error bands and to propagate the input errors, in the latter case the errors in code application to relevant measurements are used to derive the error bands. The CIAU method exploits the idea of the 'status approach' for identifying the thermal-hydraulic conditions of an accident in any Nuclear Power Plant (NPP). Errors in predicting such status are derived from the comparison between predicted and measured quantities and, in the stage of the application of the method, are used to compute the uncertainty. (author)

Total System Performance Assessment - License Application Methods and Approach

Energy Technology Data Exchange (ETDEWEB)

J. McNeish

2003-12-08

''Total System Performance Assessment-License Application (TSPA-LA) Methods and Approach'' provides the top-level method and approach for conducting the TSPA-LA model development and analyses. The method and approach is responsive to the criteria set forth in Total System Performance Assessment Integration (TSPAI) Key Technical Issues (KTIs) identified in agreements with the U.S. Nuclear Regulatory Commission, the ''Yucca Mountain Review Plan'' (YMRP), ''Final Report'' (NRC 2003 [163274]), and the NRC final rule 10 CFR Part 63 (NRC 2002 [156605]). This introductory section provides an overview of the TSPA-LA, the projected TSPA-LA documentation structure, and the goals of the document. It also provides a brief discussion of the regulatory framework, the approach to risk management of the development and analysis of the model, and the overall organization of the document. The section closes with some important conventions that are used in this document.

Multi-scale image segmentation method with visual saliency constraints and its application

Science.gov (United States)

Chen, Yan; Yu, Jie; Sun, Kaimin

2018-03-01

Object-based image analysis method has many advantages over pixel-based methods, so it is one of the current research hotspots. It is very important to get the image objects by multi-scale image segmentation in order to carry out object-based image analysis. The current popular image segmentation methods mainly share the bottom-up segmentation principle, which is simple to realize and the object boundaries obtained are accurate. However, the macro statistical characteristics of the image areas are difficult to be taken into account, and fragmented segmentation (or over-segmentation) results are difficult to avoid. In addition, when it comes to information extraction, target recognition and other applications, image targets are not equally important, i.e., some specific targets or target groups with particular features worth more attention than the others. To avoid the problem of over-segmentation and highlight the targets of interest, this paper proposes a multi-scale image segmentation method with visually saliency graph constraints. Visual saliency theory and the typical feature extraction method are adopted to obtain the visual saliency information, especially the macroscopic information to be analyzed. The visual saliency information is used as a distribution map of homogeneity weight, where each pixel is given a weight. This weight acts as one of the merging constraints in the multi- scale image segmentation. As a result, pixels that macroscopically belong to the same object but are locally different can be more likely assigned to one same object. In addition, due to the constraint of visual saliency model, the constraint ability over local-macroscopic characteristics can be well controlled during the segmentation process based on different objects. These controls will improve the completeness of visually saliency areas in the segmentation results while diluting the controlling effect for non- saliency background areas. Experiments show that this method works

Weathering methods for preservative treated wood and their applicability for fire retarded wood

NARCIS (Netherlands)

Voss, A.

1999-01-01

preservative treated wood. The aim of the presentation is to inform you about current testing methods and to discuss their applicability to test fire retarded wood in outdoor use. Assuming that fire retardants will only be used in out of ground contact, only those methods are mentioned, which fit

Machine Learning-Empowered Biometric Methods for Biomedicine Applications

Directory of Open Access Journals (Sweden)

Qingxue Zhang

2017-07-01

Full Text Available Nowadays, pervasive computing technologies are paving a promising way for advanced smart health applications. However, a key impediment faced by wide deployment of these assistive smart devices, is the increasing privacy and security issue, such as how to protect access to sensitive patient data in the health record. Focusing on this challenge, biometrics are attracting intense attention in terms of effective user identification to enable confidential health applications. In this paper, we take special interest in two bio-potential-based biometric modalities, electrocardiogram (ECG and electroencephalogram (EEG, considering that they are both unique to individuals, and more reliable than token (identity card and knowledge-based (username/password methods. After extracting effective features in multiple domains from ECG/EEG signals, several advanced machine learning algorithms are introduced to perform the user identification task, including Neural Network, K-nearest Neighbor, Bagging, Random Forest and AdaBoost. Experimental results on two public ECG and EEG datasets show that ECG is a more robust biometric modality compared to EEG, leveraging a higher signal to noise ratio and also more distinguishable morphological patterns. Among different machine learning classifiers, the random forest greatly outperforms the others and owns an identification rate as high as 98%. This study is expected to demonstrate that properly selected biometric empowered by an effective machine learner owns a great potential, to enable confidential biomedicine applications in the era of smart digital health.

Study on the Application of TOPSIS Method to the Introduction of Foreign Players in CBA Games

Science.gov (United States)

Zhongyou, Xing

The TOPSIS method is a multiple attribute decision-making method. This paper introduces the current situation of the introduction of foreign players in CBA games, presents the principles and calculation steps of TOPSIS method in detail, and applies it to the quantitative evaluation of the comprehensively competitive ability during the introduction of foreign players. Through the analysis of practical application, we found that the TOPSIS method has relatively high rationality and applicability when it is used to evaluate the comprehensively competitive ability during the introduction of foreign players.

Application of heat-balance integral method to conjugate thermal explosion

Directory of Open Access Journals (Sweden)

Novozhilov Vasily

2009-01-01

Full Text Available Conjugate thermal explosion is an extension of the classical theory, proposed and studied recently by the author. The paper reports application of heat-balance integral method for developing phase portraits for systems undergoing conjugate thermal explosion. The heat-balance integral method is used as an averaging method reducing partical differential equation problem to the set of first-order ordinary differential equations. The latter reduced problem allows natural interpretation in appropriately chosen phase space. It is shown that, with the help of heat-balance integral technique, conjugate thermal explosion problem can be described with a good accuracy by the set of non-linear first-order differential equations involving complex error function. Phase trajectories are presented for typical regimes emerging in conjugate thermal explosion. Use of heat-balance integral as a spatial averaging method allows efficient description of system evolution to be developed.

Statistical methods of discrimination and classification advances in theory and applications

CERN Document Server

Choi, Sung C

1986-01-01

Statistical Methods of Discrimination and Classification: Advances in Theory and Applications is a collection of papers that tackles the multivariate problems of discriminating and classifying subjects into exclusive population. The book presents 13 papers that cover that advancement in the statistical procedure of discriminating and classifying. The studies in the text primarily focus on various methods of discriminating and classifying variables, such as multiple discriminant analysis in the presence of mixed continuous and categorical data; choice of the smoothing parameter and efficiency o

Influence of application methods of one-step self-etching adhesives on microtensile bond strength

Directory of Open Access Journals (Sweden)

Chul-Kyu Choi,

2011-05-01

Full Text Available Objectives The purpose of this study was to evaluate the effect of various application methods of one-step self-etch adhesives to microtensile resin-dentin bond strength. Materials and Methods Thirty-six extracted human molars were used. The teeth were assigned randomly to twelve groups (n = 15, according to the three different adhesive systems (Clearfil Tri-S Bond, Adper Prompt L-Pop, G-Bond and application methods. The adhesive systems were applied on the dentin as follows: 1 The single coating, 2 The double coating, 3 Manual agitation, 4 Ultrasonic agitation. Following the adhesive application, light-cure composite resin was constructed. The restored teeth were stored in distilled water at room temperature for 24 hours, and prepared 15 specimens per groups. Then microtensile bond strength was measured and the failure mode was examined. Results Manual agitation and ultrasonic agitation of adhesive significantly increased the microtensile bond strength than single coating and double coating did. Double coating of adhesive significantly increased the microtensile bond strength than single coating did and there was no significant difference between the manual agitation and ultrasonic agitation group. There was significant difference in microtensile bonding strength among all adhesives and Clearfil Tri-S Bond showed the highest bond strength. Conclusions In one-step self-etching adhesives, there was significant difference according to application methods and type of adhesives. No matter of the material, the manual or ultrasonic agitation of the adhesive showed significantly higher microtensile bond strength.

Theoretical physics 7 quantum mechanics : methods and applications

CERN Document Server

Nolting, Wolfgang

2017-01-01

This textbook offers a clear and comprehensive introduction to methods and applications in quantum mechanics, one of the core components of undergraduate physics courses. It follows on naturally from the previous volumes in this series, thus developing the understanding of quantized states further on. The first part of the book introduces the quantum theory of angular momentum and approximation methods. More complex themes are covered in the second part of the book, which describes multiple particle systems and scattering theory. Ideally suited to undergraduate students with some grounding in the basics of quantum mechanics, the book is enhanced throughout with learning features such as boxed inserts and chapter summaries, with key mathematical derivations highlighted to aid understanding. The text is supported by numerous worked examples and end of chapter problem sets.  About the Theoretical Physics series Translated from the renowned and highly successful German editions, the eight volumes of this seri...

Frontiers of biostatistical methods and applications in clinical oncology

CERN Document Server

Crowley, John

2017-01-01

This book presents the state of the art of biostatistical methods and their applications in clinical oncology. Many methodologies established today in biostatistics have been brought about through its applications to the design and analysis of oncology clinical studies. This field of oncology, now in the midst of evolution owing to rapid advances in biotechnologies and cancer genomics, is becoming one of the most promising disease fields in the shift toward personalized medicine. Modern developments of diagnosis and therapeutics of cancer have also been continuously fueled by recent progress in establishing the infrastructure for conducting more complex, large-scale clinical trials and observational studies. The field of cancer clinical studies therefore will continue to provide many new statistical challenges that warrant further progress in the methodology and practice of biostatistics. This book provides a systematic coverage of various stages of cancer clinical studies. Topics from modern cancer clinical ...

[Applications of mathematical statistics methods on compatibility researches of traditional Chinese medicines formulae].

Science.gov (United States)

Mai, Lan-Yin; Li, Yi-Xuan; Chen, Yong; Xie, Zhen; Li, Jie; Zhong, Ming-Yu

2014-05-01

The compatibility of traditional Chinese medicines (TCMs) formulae containing enormous information, is a complex component system. Applications of mathematical statistics methods on the compatibility researches of traditional Chinese medicines formulae have great significance for promoting the modernization of traditional Chinese medicines and improving clinical efficacies and optimizations of formulae. As a tool for quantitative analysis, data inference and exploring inherent rules of substances, the mathematical statistics method can be used to reveal the working mechanisms of the compatibility of traditional Chinese medicines formulae in qualitatively and quantitatively. By reviewing studies based on the applications of mathematical statistics methods, this paper were summarized from perspective of dosages optimization, efficacies and changes of chemical components as well as the rules of incompatibility and contraindication of formulae, will provide the references for further studying and revealing the working mechanisms and the connotations of traditional Chinese medicines.

A Smartphone Application for Personalized and Multi-Method Interventions toward Energy Saving in Buildings

Directory of Open Access Journals (Sweden)

Peeraya Inyim

2018-05-01

Full Text Available Occupant behavior is a significant contributor to energy waste in buildings. This research introduces an advanced smartphone application, developed based on the theoretical underpinnings of situational awareness theory, to effectively implement multi-method and personalized intervention to encourage energy conservation behaviors of building occupants. The new smart application provides several innovative features, such as energy saving points, customized feedback, and visualized user interface, which are implemented in the application to support multi-method interventions. The application was created using the Java language for Android devices. With the use of the Android platform, the app takes advantage of hardware technology from the user’s mobile device. Measurement of occupancy behavior is accomplished by making use of the device’s positional sensors. Orientation and geomagnetic field sensors serve to provide an accurate location of an occupant inside the building. The application can determine energy waste in a zone by using occupancy behavior. Moreover, the application offers real-time and projected future energy consumption based on occupants’ behaviors. This novel feature can significantly improve communication that can lead to prompt action for building energy reduction. Results show how the app can compile raw data on energy behavior and make it easy to understand for the user through the use of visuals and statistical algorithms.

Application of the gradient method to Hartree-Fock-Bogoliubov theory

International Nuclear Information System (INIS)

Robledo, L. M.; Bertsch, G. F.

2011-01-01

A computer code is presented for solving the equations of the Hartree-Fock-Bogoliubov (HFB) theory by the gradient method, motivated by the need for efficient and robust codes to calculate the configurations required by extensions of the HFB theory, such as the generator coordinate method. The code is organized with a separation between the parts that are specific to the details of the Hamiltonian and the parts that are generic to the gradient method. This permits total flexibility in choosing the symmetries to be imposed on the HFB solutions. The code solves for both even and odd particle-number ground states, with the choice determined by the input data stream. Application is made to the nuclei in the sd shell using the universal sd-shell interaction B (USDB) shell-model Hamiltonian.

Model Robust Calibration: Method and Application to Electronically-Scanned Pressure Transducers

Science.gov (United States)

Walker, Eric L.; Starnes, B. Alden; Birch, Jeffery B.; Mays, James E.

2010-01-01

This article presents the application of a recently developed statistical regression method to the controlled instrument calibration problem. The statistical method of Model Robust Regression (MRR), developed by Mays, Birch, and Starnes, is shown to improve instrument calibration by reducing the reliance of the calibration on a predetermined parametric (e.g. polynomial, exponential, logarithmic) model. This is accomplished by allowing fits from the predetermined parametric model to be augmented by a certain portion of a fit to the residuals from the initial regression using a nonparametric (locally parametric) regression technique. The method is demonstrated for the absolute scale calibration of silicon-based pressure transducers.

Environmental applications of manometric respirometric methods

Energy Technology Data Exchange (ETDEWEB)

Roppola, K.

2009-07-01

decomposition rates was studied in order to evaluate the applicable peat types that can be used in landfill structures. Only minor (BOD/ThOD < 0.4%) biodegradation was observed with compaction peat samples, and the stable state, in which biodegradation stopped, was achieved during a two month period. The manometric respirometric method was also applied for the biodegradation studies in which the effect of the modification of soil properties on biodegradation rates of bio-oils was tested. Modified properties were the nutrient content and the pH of the soil. Fertiliser addition and pH adjustment increased both the BOD/ThOD% values of the model substances and the precision of the measurement. The manometric respirometric method was proved to be an advanced method for simulating biodegradation processes in soil and water media. (orig.)

Application of model-based and knowledge-based measuring methods as analytical redundancy

International Nuclear Information System (INIS)

Hampel, R.; Kaestner, W.; Chaker, N.; Vandreier, B.

1997-01-01

The safe operation of nuclear power plants requires the application of modern and intelligent methods of signal processing for the normal operation as well as for the management of accident conditions. Such modern and intelligent methods are model-based and knowledge-based ones being founded on analytical knowledge (mathematical models) as well as experiences (fuzzy information). In addition to the existing hardware redundancies analytical redundancies will be established with the help of these modern methods. These analytical redundancies support the operating staff during the decision-making. The design of a hybrid model-based and knowledge-based measuring method will be demonstrated by the example of a fuzzy-supported observer. Within the fuzzy-supported observer a classical linear observer is connected with a fuzzy-supported adaptation of the model matrices of the observer model. This application is realized for the estimation of the non-measurable variables as steam content and mixture level within pressure vessels with water-steam mixture during accidental depressurizations. For this example the existing non-linearities will be classified and the verification of the model will be explained. The advantages of the hybrid method in comparison to the classical model-based measuring methods will be demonstrated by the results of estimation. The consideration of the parameters which have an important influence on the non-linearities requires the inclusion of high-dimensional structures of fuzzy logic within the model-based measuring methods. Therefore methods will be presented which allow the conversion of these high-dimensional structures to two-dimensional structures of fuzzy logic. As an efficient solution of this problem a method based on cascaded fuzzy controllers will be presented. (author). 2 refs, 12 figs, 5 tabs

Introduction to modern methods of quantum many-body theory and their applications

CERN Document Server

Fantoni, Stefano; Krotscheck, Eckhard S

2002-01-01

This invaluable book contains pedagogical articles on the dominant nonstochastic methods of microscopic many-body theories - the methods of density functional theory, coupled cluster theory, and correlated basis functions - in their widest sense. Other articles introduce students to applications of these methods in front-line research, such as Bose-Einstein condensates, the nuclear many-body problem, and the dynamics of quantum liquids. These keynote articles are supplemented by experimental reviews on intimately connected topics that are of current relevance. The book addresses the striking l

Application of the electrodiffusion method for near-wall flow diagnostics

Directory of Open Access Journals (Sweden)

Tihon J.

2014-03-01

Full Text Available The electrodiffusion method is presented as a measuring technique suitable for the flow measurement done in close proximity of the wall, thus in the region difficultly accessible by standard anemometric techniques (e.g. PIV, LDA. The experimental results obtained in different flow configurations (backward-facing step flow, wavy film flow, turbulent channel flow, rising Taylor bubbles document application capabilities of this technique, e.g. for mapping of wall shear stresses, delimitation of stable flow-recirculation zones, detection of short-time reversal of the near-wall flow, investigation of the near-wall turbulence, or detection of moving fluid particles. A new technology of sensor fabrication based on photolithography is introduced and possible applications of microsensors in microfluidic devices discussed.

A new service-oriented grid-based method for AIoT application and implementation

Science.gov (United States)

Zou, Yiqin; Quan, Li

2017-07-01

The traditional three-layer Internet of things (IoT) model, which includes physical perception layer, information transferring layer and service application layer, cannot express complexity and diversity in agricultural engineering area completely. It is hard to categorize, organize and manage the agricultural things with these three layers. Based on the above requirements, we propose a new service-oriented grid-based method to set up and build the agricultural IoT. Considering the heterogeneous, limitation, transparency and leveling attributes of agricultural things, we propose an abstract model for all agricultural resources. This model is service-oriented and expressed with Open Grid Services Architecture (OGSA). Information and data of agricultural things were described and encapsulated by using XML in this model. Every agricultural engineering application will provide service by enabling one application node in this service-oriented grid. Description of Web Service Resource Framework (WSRF)-based Agricultural Internet of Things (AIoT) and the encapsulation method were also discussed in this paper for resource management in this model.

Applications of mixed-methods methodology in clinical pharmacy research.

Science.gov (United States)

Hadi, Muhammad Abdul; Closs, S José

2016-06-01

Introduction Mixed-methods methodology, as the name suggests refers to mixing of elements of both qualitative and quantitative methodologies in a single study. In the past decade, mixed-methods methodology has gained popularity among healthcare researchers as it promises to bring together the strengths of both qualitative and quantitative approaches. Methodology A number of mixed-methods designs are available in the literature and the four most commonly used designs in healthcare research are: the convergent parallel design, the embedded design, the exploratory design, and the explanatory design. Each has its own unique advantages, challenges and procedures and selection of a particular design should be guided by the research question. Guidance on designing, conducting and reporting mixed-methods research is available in the literature, so it is advisable to adhere to this to ensure methodological rigour. When to use it is best suited when the research questions require: triangulating findings from different methodologies to explain a single phenomenon; clarifying the results of one method using another method; informing the design of one method based on the findings of another method, development of a scale/questionnaire and answering different research questions within a single study. Two case studies have been presented to illustrate possible applications of mixed-methods methodology. Limitations Possessing the necessary knowledge and skills to undertake qualitative and quantitative data collection, analysis, interpretation and integration remains the biggest challenge for researchers conducting mixed-methods studies. Sequential study designs are often time consuming, being in two (or more) phases whereas concurrent study designs may require more than one data collector to collect both qualitative and quantitative data at the same time.

Application of the maximum entropy method to profile analysis

International Nuclear Information System (INIS)

Armstrong, N.; Kalceff, W.; Cline, J.P.

1999-01-01

Full text: A maximum entropy (MaxEnt) method for analysing crystallite size- and strain-induced x-ray profile broadening is presented. This method treats the problems of determining the specimen profile, crystallite size distribution, and strain distribution in a general way by considering them as inverse problems. A common difficulty faced by many experimenters is their inability to determine a well-conditioned solution of the integral equation, which preserves the positivity of the profile or distribution. We show that the MaxEnt method overcomes this problem, while also enabling a priori information, in the form of a model, to be introduced into it. Additionally, we demonstrate that the method is fully quantitative, in that uncertainties in the solution profile or solution distribution can be determined and used in subsequent calculations, including mean particle sizes and rms strain. An outline of the MaxEnt method is presented for the specific problems of determining the specimen profile and crystallite or strain distributions for the correspondingly broadened profiles. This approach offers an alternative to standard methods such as those of Williamson-Hall and Warren-Averbach. An application of the MaxEnt method is demonstrated in the analysis of alumina size-broadened diffraction data (from NIST, Gaithersburg). It is used to determine the specimen profile and column-length distribution of the scattering domains. Finally, these results are compared with the corresponding Williamson-Hall and Warren-Averbach analyses. Copyright (1999) Australian X-ray Analytical Association Inc

Rationalization of thermal injury quantification methods: application to skin burns.

Science.gov (United States)

Viglianti, Benjamin L; Dewhirst, Mark W; Abraham, John P; Gorman, John M; Sparrow, Eph M

2014-08-01

Classification of thermal injury is typically accomplished either through the use of an equivalent dosimetry method (equivalent minutes at 43 °C, CEM43 °C) or through a thermal-injury-damage metric (the Arrhenius method). For lower-temperature levels, the equivalent dosimetry approach is typically employed while higher-temperature applications are most often categorized by injury-damage calculations. The two methods derive from common thermodynamic/physical chemistry origins. To facilitate the development of the interrelationships between the two metrics, application is made to the case of skin burns. This thermal insult has been quantified by numerical simulation, and the extracted time-temperature results served for the evaluation of the respective characterizations. The simulations were performed for skin-surface exposure temperatures ranging from 60 to 90 °C, where each surface temperature was held constant for durations extending from 10 to 110 s. It was demonstrated that values of CEM43 at the basal layer of the skin were highly correlated with the depth of injury calculated from a thermal injury integral. Local values of CEM43 were connected to the local cell survival rate, and a correlating equation was developed relating CEM43 with the decrease in cell survival from 90% to 10%. Finally, it was shown that the cell survival/CEM43 relationship for the cases investigated here most closely aligns with isothermal exposure of tissue to temperatures of ~50 °C. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Monte Carlo Methods Development and Applications in Conformational Sampling of Proteins

DEFF Research Database (Denmark)

Tian, Pengfei

quantitative insights into their thermodynamic and mechanistic properties that are difficult to probe in laboratory experiments. However, despite the rapid progress in the development of molecular simulation, there are still two limiting factors, (1), the current molecular mechanics force fields alone...... sampling methods to address these two problems. First of all, a novel technique has been developed for reliably estimating diffusion coefficients for use in the enhanced sampling of molecular simulations. A broad applicability of this method is illustrated by studying various simulation problems...

Theory and application of deterministic multidimensional pointwise energy lattice physics methods

International Nuclear Information System (INIS)

Zerkle, M.L.

1999-01-01

The theory and application of deterministic, multidimensional, pointwise energy lattice physics methods are discussed. These methods may be used to solve the neutron transport equation in multidimensional geometries using near-continuous energy detail to calculate equivalent few-group diffusion theory constants that rigorously account for spatial and spectral self-shielding effects. A dual energy resolution slowing down algorithm is described which reduces the computer memory and disk storage requirements for the slowing down calculation. Results are presented for a 2D BWR pin cell depletion benchmark problem

An introduction to fuzzy linear programming problems theory, methods and applications

CERN Document Server

Kaur, Jagdeep

2016-01-01

The book presents a snapshot of the state of the art in the field of fully fuzzy linear programming. The main focus is on showing current methods for finding the fuzzy optimal solution of fully fuzzy linear programming problems in which all the parameters and decision variables are represented by non-negative fuzzy numbers. It presents new methods developed by the authors, as well as existing methods developed by others, and their application to real-world problems, including fuzzy transportation problems. Moreover, it compares the outcomes of the different methods and discusses their advantages/disadvantages. As the first work to collect at one place the most important methods for solving fuzzy linear programming problems, the book represents a useful reference guide for students and researchers, providing them with the necessary theoretical and practical knowledge to deal with linear programming problems under uncertainty.

SU-F-BRA-09: New Efficient Method for Xoft Axxent Electronic Brachytherapy Source Calibration by Pre-Characterizing Surface Applicators

Energy Technology Data Exchange (ETDEWEB)

Pai, S [iCAD Inc., Los Gatos, CA (United States)

2015-06-15

Purpose: The objective is to improve the efficiency and efficacy of Xoft™ Axxent™ electronic brachytherapy (EBT) calibration of the source & surface applicator using AAPM TG-61 formalism. Methods: Current method of Xoft EBT source calibration involves determination of absolute dose rate of the source in each of the four conical surface applicators using in-air chamber measurements & TG61 formalism. We propose a simplified TG-61 calibration methodology involving initial characterization of surface cone applicators. This is accomplished by calibrating dose rates for all 4 surface applicator sets (for 10 sources) which establishes the “applicator output ratios” with respect to the selected reference applicator (20 mm applicator). After the initial time, Xoft™ Axxent™ source TG61 Calibration is carried out only in the reference applicator. Using the established applicator output ratios, dose rates for other applicators will be calculated. Results: 200 sources & 8 surface applicator sets were calibrated cumulatively using a Standard Imaging A20 ion-chamber in accordance with manufacturer-recommended protocols. Dose rates of 10, 20, 35 & 50mm applicators were normalized to the reference (20mm) applicator. The data in Figure 1 indicates that the normalized dose rate variation for each applicator for all 200 sources is better than ±3%. The average output ratios are 1.11, 1.02 and 0.49 for the 10 mm,35 mm and 50 mm applicators, respectively, which are in good agreement with the manufacturer’s published output ratios of 1.13, 1.02 and 0.49. Conclusion: Our measurements successfully demonstrate the accuracy of a new calibration method using a single surface applicator for Xoft EBT sources and deriving the dose rates of other applicators. The accuracy of the calibration is improved as this method minimizes the source position variation inside the applicator during individual source calibrations. The new method significantly reduces the calibration time to less

Continuous surveillance of transformers using artificial intelligence methods; Surveillance continue des transformateurs: application des methodes d'intelligence artificielle

Energy Technology Data Exchange (ETDEWEB)

Schenk, A.; Germond, A. [Ecole Polytechnique Federale de Lausanne, Lausanne (Switzerland); Boss, P.; Lorin, P. [ABB Secheron SA, Geneve (Switzerland)

2000-07-01

The article describes a new method for the continuous surveillance of power transformers based on the application of artificial intelligence (AI) techniques. An experimental pilot project on a specially equipped, strategically important power transformer is described. Traditional surveillance methods and the use of mathematical models for the prediction of faults are described. The article describes the monitoring equipment used in the pilot project and the AI principles such as self-organising maps that are applied. The results obtained from the pilot project and methods for their graphical representation are discussed.

Automatic Hypocenter Determination Method in JMA Catalog and its Application

Science.gov (United States)

Tamaribuchi, K.

2017-12-01

The number of detectable earthquakes around Japan has increased by developing the high-sensitivity seismic observation network. After the 2011 Tohoku-oki earthquake, the number of detectable earthquakes have dramatically increased due to its aftershocks and induced earthquakes. This enormous number of earthquakes caused inability of manually determination of all the hypocenters. The Japan Meteorological Agency (JMA), which produces the earthquake catalog in Japan, has developed a new automatic hypocenter determination method and started its operation from April 1, 2016. This method (named PF method; Phase combination Forward search method) can determine the hypocenters of earthquakes that occur simultaneously by searching for the optimal combination of P- and S-wave arrival times and the maximum amplitudes using a Bayesian estimation technique. In the 2016 Kumamoto earthquake sequence, we successfully detected about 70,000 aftershocks automatically during the period from April 14 to the end of May, and this method contributed to the real-time monitoring of the seismic activity. Furthermore, this method can be also applied to the Earthquake Early Warning (EEW). Application of this method for EEW is called the IPF method and has been used as the hypocenter determination method of the EEW system in JMA from December 2016. By developing this method further, it is possible to contribute to not only speeding up the catalog production, but also improving reliability of the early warning.

Parallel Resolved Open Source CFD-DEM: Method, Validation and Application

Directory of Open Access Journals (Sweden)

A. Hager

2014-03-01

Full Text Available In the following paper the authors present a fully parallelized Open Source method for calculating the interaction of immersed bodies and surrounding fluid. A combination of computational fluid dynamics (CFD and a discrete element method (DEM accounts for the physics of both the fluid and the particles. The objects considered are relatively big compared to the cells of the fluid mesh, i.e. they cover several cells each. Thus this fictitious domain method (FDM is called resolved. The implementation is realized within the Open Source framework CFDEMcOupling (www.cfdem.com, which provides an interface between OpenFOAM® based CFD-solvers and the DEM software LIGGGHTS (www.liggghts.com. While both LIGGGHTS and OpenFOAM® were already parallelized, only a recent improvement of the algorithm permits the fully parallel computation of resolved problems. Alongside with a detailed description of the method, its implementation and recent improvements, a number of application and validation examples is presented in the scope of this paper.

Application of multi-locus analytical methods to identify interacting loci in case-control studies.

NARCIS (Netherlands)

Vermeulen, S.; Heijer, M. den; Sham, P.; Knight, J.

2007-01-01

To identify interacting loci in genetic epidemiological studies the application of multi-locus methods of analysis is warranted. Several more advanced classification methods have been developed in the past years, including multiple logistic regression, sum statistics, logic regression, and the

Transient plant transformation mediated by Agrobacterium tumefaciens: Principles, methods and applications.

Science.gov (United States)

Krenek, Pavel; Samajova, Olga; Luptovciak, Ivan; Doskocilova, Anna; Komis, George; Samaj, Jozef

2015-11-01

Agrobacterium tumefaciens is widely used as a versatile tool for development of stably transformed model plants and crops. However, the development of Agrobacterium based transient plant transformation methods attracted substantial attention in recent years. Transient transformation methods offer several applications advancing stable transformations such as rapid and scalable recombinant protein production and in planta functional genomics studies. Herein, we highlight Agrobacterium and plant genetics factors affecting transfer of T-DNA from Agrobacterium into the plant cell nucleus and subsequent transient transgene expression. We also review recent methods concerning Agrobacterium mediated transient transformation of model plants and crops and outline key physical, physiological and genetic factors leading to their successful establishment. Of interest are especially Agrobacterium based reverse genetics studies in economically important crops relying on use of RNA interference (RNAi) or virus-induced gene silencing (VIGS) technology. The applications of Agrobacterium based transient plant transformation technology in biotech industry are presented in thorough detail. These involve production of recombinant proteins (plantibodies, vaccines and therapeutics) and effectoromics-assisted breeding of late blight resistance in potato. In addition, we also discuss biotechnological potential of recombinant GFP technology and present own examples of successful Agrobacterium mediated transient plant transformations. Copyright © 2015 Elsevier Inc. All rights reserved.

Iterative Method of Regularization with Application of Advanced Technique for Detection of Contours

International Nuclear Information System (INIS)

Niedziela, T.; Stankiewicz, A.

2000-01-01

This paper proposes a novel iterative method of regularization with application of an advanced technique for detection of contours. To eliminate noises, the properties of convolution of functions are utilized. The method can be accomplished in a simple neural cellular network, which creates the possibility of extraction of contours by automatic image recognition equipment. (author)

Application of WSP method in analysis of environmental samples

International Nuclear Information System (INIS)

Stacho, M.; Slugen, V.; Hinca, R.; Sojak, S.; Krnac, S.

2014-01-01

Detection of activity in natural samples is specific especially because of its low level and high background interferences. Reduction of background interferences could be reached using low background chamber. Measurement geometry in shape of Marinelli beaker is commonly used according to low level of activity in natural samples. The Peak Net Area (PNA) method is the world-wide accepted technique for analysis of gamma-ray spectra. It is based on the net area calculation of the full energy peak, therefore, it takes into account only a fraction of measured gamma-ray spectrum. On the other hand, the Whole Spectrum Processing (WSP) approach to the gamma analysis makes possible to use entire information being in the spectrum. This significantly raises efficiency and improves energy resolution of the analysis. A principal step for the WSP application is building up the suitable response operator. Problems are put in an appearance when suitable standard calibration sources are unavailable. It may be occurred in the case of large volume samples and/or in the analysis of high energy range. Combined experimental and mathematical calibration may be a suitable solution. Many different detectors have been used to register the gamma ray and its energy. HPGe detectors produce the highest resolution commonly available today. Therefore they are they the most often used detectors in natural samples activity analysis. Scintillation detectors analysed using PNA method could be also used in simple cases, but for complicated spectra are practically inapplicable. WSP approach improves resolution of scintillation detectors and expands their applicability. WSP method allowed significant improvement of the energetic resolution and separation of "1"3"7Cs 661 keV peak from "2"1"4Bi 609 keV peak. At the other hand the statistical fluctuations in the lower part of the spectrum highlighted by background subtraction causes that this part is still not reliably analyzable. (authors)

Selected asymptotic methods with applications to electromagnetics and antennas

CERN Document Server

Fikioris, George; Bakas, Odysseas N

2013-01-01

This book describes and illustrates the application of several asymptotic methods that have proved useful in the authors' research in electromagnetics and antennas. We first define asymptotic approximations and expansions and explain these concepts in detail. We then develop certain prerequisites from complex analysis such as power series, multivalued functions (including the concepts of branch points and branch cuts), and the all-important gamma function. Of particular importance is the idea of analytic continuation (of functions of a single complex variable); our discussions here include som

Status of photonuclear method of analysis among other nuclear analytical methods and main fields of its application

International Nuclear Information System (INIS)

Burmistenko, Yu.N.

1986-01-01

Technical, organizational and economical aspects as applied to the field of application of photonuclear methods of analysis of substance composition are considered. As for the technical aspect, the most important factors are nuclear-physical characteristics of the elements under determination and the elements composing the sample matrix. As for the organizational aspect, the governing factor in a number of cases is the availability of an irradiation device in the close vicinity of the analytical laboratory. Studying the technical and organizational aspects while choosing the proper method one can obtain the main source data to perform feasibility studies of a nuclear analytical complex with this or that activation source. Therefore, the economical aspect is governing for the choice of the method

Manual herbicide application methods for managing vegetation in Appalachian hardwood forests

Science.gov (United States)

Jeffrey D. Kochenderfer; James N. Kochenderfer; Gary W. Miller

2012-01-01

Four manual herbicide application methods are described for use in Appalachian hardwood forests. Stem injection, basal spray, cut-stump, and foliar spray techniques can be used to control interfering vegetation and promote the development of desirable reproduction and valuable crop trees in hardwood forests. Guidelines are presented to help the user select the...

The application of variable sampling method in the audit testing of insurance companies' premium income

Directory of Open Access Journals (Sweden)

Jovković Biljana

2012-12-01

Full Text Available The aim of this paper is to present the procedure of audit sampling using the variable sampling methods for conducting the tests of income from insurance premiums in insurance company 'Takovo'. Since the incomes from the insurance premiums from vehicle insurance and third-party vehicle insurance have the dominant share of the insurance company's income, the application of this method will be shown in the audit examination of these incomes - incomes from VI and TPVI premiums. For investigating the applicability of these methods in testing the income of other insurance companies, we shall implement the method of variable sampling in the audit testing of the premium income from the three leading insurance companies in Serbia, 'Dunav', 'DDOR' and 'Delta Generali' Insurance.

Methods for High-Order Multi-Scale and Stochastic Problems Analysis, Algorithms, and Applications

Science.gov (United States)

2016-10-17

the good performance of these schemes. In [4], we study spectral collocation methods for functions which are analytic in the open interval but have...the detailed detonation struc- ture. The efficient parallel AMR-WENO method provides a good tool for these detonation simulations. In [10], a...with his students a few years ago. This method has now found a wide usage in applications. In [11], we give a stability analysis, using both the GKS

Interior Point Methods on GPU with application to Model Predictive Control

DEFF Research Database (Denmark)

Gade-Nielsen, Nicolai Fog

The goal of this thesis is to investigate the application of interior point methods to solve dynamical optimization problems, using a graphical processing unit (GPU) with a focus on problems arising in Model Predictice Control (MPC). Multi-core processors have been available for over ten years now...... software package called GPUOPT, available under the non-restrictive MIT license. GPUOPT includes includes a primal-dual interior-point method, which supports both the CPU and the GPU. It is implemented as multiple components, where the matrix operations and solver for the Newton directions is separated...

The application of fuzzy-based methods to central nerve fiber imaging

DEFF Research Database (Denmark)

Axer, Hubertus; Jantzen, Jan; Keyserlingk, Diedrich Graf v.

2003-01-01

This paper discusses the potential of fuzzy logic methods within medical imaging. Technical advances have produced imaging techniques that can visualize structures and their functions in the living human body. The interpretation of these images plays a prominent role in diagnostic and therapeutic...... decisions, so physicians must deal with a variety of image processing methods and their applications.This paper describes three different sources of medical imagery that allow the visualization of nerve fibers in the human brain: (1) an algorithm for automatic segmentation of some parts of the thalamus....... Fuzzy logic methods were applied to analyze these pictures from low- to high-level image processing. The solutions presented here are motivated by problems of routine neuroanatomic research demonstrating fuzzy-based methods to be valuable tools in medical image processing....

CAPTO method application to the quality assessment of Slovak brown coal

Directory of Open Access Journals (Sweden)

Turèániová ¼udmila

1998-09-01

Full Text Available This paper describes the principle and application of CAPTO (Controlled - atmosphere programmed - temperature oxidation method for the sulphur content valuation in coal. The principle of CAPTO consists in mixing the coal with an inert material (WO3 and oxidation of the sample by a linear increase of temperature to 1000oC. The evolved gases (CO2, H2O, SO2 and NO2 are analyzed by infrared sensors. The method enables the determination of different sulphur forms (sulphidic, elemental, sulphate, organic aromatic and organic non-aromatic, hydrogen, carbon and humidity. The results on Americal coal Illionois No. 6 and Slovakian brown coal Nováky serve as an illustration of the CAPTO method possibility.

Fourier method for three-dimensional partial differential equations in periodic geometry. Application: HELIAC

International Nuclear Information System (INIS)

Shestakov, A.I.; Mirin, A.A.

1984-01-01

A numerical method based on Fourier expansions and finite differences is presented. The method is demonstrated by solving a scalar, three-dimensional elliptic equation arising in MFE research, but has applicability to a wider class of problems. The scheme solves equations whose solutions are expected to be periodic in one or more of the independent variables

Bispectral methods of signal processing applications in radar, telecommunications and digital image restoration

CERN Document Server

Totsky, Alexander V; Kravchenko, Victor F

2015-01-01

By studying applications in radar, telecommunications and digital image restoration, this monograph discusses signal processing techniques based on bispectral methods. Improved robustness against different forms of noise as well as preservation of phase information render this method a valuable alternative to common power-spectrum analysis used in radar object recognition, digital wireless communications, and jitter removal in images.

Application of radiological imaging methods to radioactive waste characterization

Energy Technology Data Exchange (ETDEWEB)

Tessaro, Ana Paula Gimenes; Souza, Daiane Cristini B. de; Vicente, Roberto, E-mail: aptessaro@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2013-07-01

Radiological imaging technologies are most frequently used for medical diagnostic purposes but are also useful in materials characterization and other non-medical applications in research and industry. The characterization of radioactive waste packages or waste samples can also benefit from these techniques. In this paper, the application of some imaging methods is examined for the physical characterization of radioactive wastes constituted by spent ion-exchange resins and activated charcoal beds stored at the Radioactive Waste Management Department of IPEN. These wastes are generated when the filter media of the water polishing system of the IEA-R1 Nuclear Research Reactor is no longer able to maintain the required water quality and are replaced. The IEA-R1 is a 5MW pool-type reactor, moderated and cooled by light water, and fission and activation products released from the reactor core must be continuously removed to prevent activity buildup in the water. The replacement of the sorbents is carried out by pumping from the filter tanks into several 200 L drums, each drum getting a variable amount of water. Considering that the results of radioanalytical methods to determine the concentrations of radionuclides are usually expressed on dry basis,the amount of water must be known to calculate the total activity of each package. At first sight this is a trivial problem that demanded, however some effort to be solved. The findings on this subject are reported in this paper. (author)

Advanced symbolic analysis for VLSI systems methods and applications

CERN Document Server

Shi, Guoyong; Tlelo Cuautle, Esteban

2014-01-01

This book provides comprehensive coverage of the recent advances in symbolic analysis techniques for design automation of nanometer VLSI systems. The presentation is organized in parts of fundamentals, basic implementation methods and applications for VLSI design. Topics emphasized include  statistical timing and crosstalk analysis, statistical and parallel analysis, performance bound analysis and behavioral modeling for analog integrated circuits . Among the recent advances, the Binary Decision Diagram (BDD) based approaches are studied in depth. The BDD-based hierarchical symbolic analysis approaches, have essentially broken the analog circuit size barrier. In particular, this book   • Provides an overview of classical symbolic analysis methods and a comprehensive presentation on the modern  BDD-based symbolic analysis techniques; • Describes detailed implementation strategies for BDD-based algorithms, including the principles of zero-suppression, variable ordering and canonical reduction; • Int...

Statistical methods with applications to demography and life insurance

CERN Document Server

Khmaladze, Estáte V

2013-01-01

Suitable for statisticians, mathematicians, actuaries, and students interested in the problems of insurance and analysis of lifetimes, Statistical Methods with Applications to Demography and Life Insurance presents contemporary statistical techniques for analyzing life distributions and life insurance problems. It not only contains traditional material but also incorporates new problems and techniques not discussed in existing actuarial literature. The book mainly focuses on the analysis of an individual life and describes statistical methods based on empirical and related processes. Coverage ranges from analyzing the tails of distributions of lifetimes to modeling population dynamics with migrations. To help readers understand the technical points, the text covers topics such as the Stieltjes, Wiener, and Itô integrals. It also introduces other themes of interest in demography, including mixtures of distributions, analysis of longevity and extreme value theory, and the age structure of a population. In addi...

BEACON: An application of nodal methods for operational support

International Nuclear Information System (INIS)

Boyd, W.A.; Nguyen, T.Q.

1992-01-01

A practical application of nodal methods is on-line plant operational support. However, to enable plant personnel to take full advantage of a nodal model to support plant operations, (a) a core nodal model must always be up to date with the current core history and conditions, (b) the nodal methods must be fast enough to allow numerous core calculations to be performed in minutes to support engineering decisions, and (c) the system must be easily accessible to engineering personnel at the reactor, their offices, or any other location considered appropriate. A core operational support package developed by Westinghouse called BEACON (best estimate analysis of core operations - nuclear) has been installed at several plants. Results from these plants and numerous in-core flux maps analyzed have demonstrated the accuracy of the model and the effectiveness of the methodology

Application of Target Costing method in the Hospitality Industry

Directory of Open Access Journals (Sweden)

Andor Pajrok

2014-12-01

Full Text Available Traditional approaches to managing costs are based on the costs that are the result of existing capabilities and resources in the company. Adding to these costs a specified margin or profit, leads to the sales price. If the market is not ready to accept such a selling price, managers need to find opportunities for rationalization and cost reduction. Target cost management begins the process of managing the sales price and the planned profit that the market can accept, and only then is it possible to determine the cost of the product. In the planning phase of the product and the manufacturing process the approach is to finding a method to lower costs and to reduce them as much as possible. The aim this of study is to investigate the application of target (strategy cost accounting methods in the Hospitality Industry.

Innovative Methods and Applications in Mucoadhesion Research

DEFF Research Database (Denmark)

Mackie, Alan; Goycoolea, Francisco M.; Menchicchi, Bianca

2017-01-01

The present review is aimed at elucidating relatively new aspects of mucoadhesion/mucus interaction and related phenomena that emerged from a Mucoadhesion workshop held in Munster on 2–3 September 2015 as a satellite event of the ICCC 13th—EUCHIS 12th. After a brief outline of the new issues......, the focus is on mucus description, purification, and mucus/mucin characterization, all steps that are pivotal to the understanding of mucus related phenomena and the choice of the correct mucosal model for in vitro and ex vivo experiments, alternative bio/mucomimetic materials are also presented....... Then a selection of preparative techniques and testing methods are described (at molecular as well as micro and macroscale) that may support the pharmaceutical development of mucus interactive systems and assist formulators in the scale-up and industrialization steps. Recent applications of mucoadhesive systems...

SECTIONING METHOD APPLICATION AT ELLIPSOMETRY OF INHOMOGENEOUS REFLECTION SYSTEMS

Directory of Open Access Journals (Sweden)

A. N. Gorlyak

2014-05-01

Full Text Available The paper deals with investigation of application peculiarities of ellipsometry methods and UF spectrophotometry at mechanical and chemical processing of optical engineering surface elements made of quartz glass. Ellipsometer LEF–3M–1, spectrophotometer SF–26 and interferometer MII–4 are used as experiment tools; they obtain widely known technical characteristics. Polarization characteristics of reflected light beam were measured by ellipsometry method; spectrophotometry method was used for measuring radiation transmission factor in UF spectrum area; by interference method surface layer thickness at quartz glass etching was measured. A method for HF–sectioning of inhomogeneous surface layer of polished quartz glass is developed based on ellipsometry equation for reflection system «inhomogeneous layer – inhomogeneous padding». The method makes it possible to carry out the measuring and analysis of optical characteristics for inhomogeneous layers system on inhomogeneous padding and to reconstruct optical profile of surface layers at quartz glass chemical processing. For definition of refractive index change along the layer depth, approximation of experimental values for polarization characteristics of homogeneous layers system is used. Inhomogeneous surface layer of polished quartz glass consists of an area (with thickness up to 20 nm and layer refractive index less than refractive index for quartz glass and an area (with thickness up to 0,1 μm and layer refractive index larger than refractive index for quartz glass. Ellipsometry and photometry methods are used for definition of technological conditions and optical characteristics of inhomogeneous layers at quartz glass chemical processing for optical elements with minimum radiation losses in UF spectrum area.

Application of mathematical statistics methods to study fluorite deposits

International Nuclear Information System (INIS)

Chermeninov, V.B.

1980-01-01

Considered are the applicability of mathematical-statistical methods for the increase of reliability of sampling and geological tasks (study of regularities of ore formation). Compared is the reliability of core sampling (regarding the selective abrasion of fluorite) and neutron activation logging for fluorine. The core sampling data are characterized by higher dispersion than neutron activation logging results (mean value of variation coefficients are 75% and 56% respectively). However the hypothesis of the equality of average two sampling is confirmed; this fact testifies to the absence of considerable variability of ore bodies

Application of the Oslo method to high resolution gamma spectra

Science.gov (United States)

Simon, A.; Guttormsen, M.; Larsen, A. C.; Beausang, C. W.; Humby, P.

2015-10-01

Hauser-Feshbach statistical model is a widely used tool for calculation of the reaction cross section, in particular for astrophysical processes. The HF model requires as an input an optical potential, gamma-strength function (GSF) and level density (LD) to properly model the statistical properties of the nucleus. The Oslo method is a well established technique to extract GSFs and LDs from experimental data, typically used for gamma-spectra obtained with scintillation detectors. Here, the first application of the Oslo method to high-resolution data obtained using the Ge detectors of the STARLITER setup at TAMU is discussed. The GSFs and LDs extracted from (p,d) and (p,t) reactions on 152154 ,Sm targets will be presented.

Specificity of Correlation Pattern Recognition Methods Application in Security Holograms Identity Control Apparatus

Science.gov (United States)

Zlokazov, E. Yu.; Starikov, R. S.; Odinokov, S. B.; Tsyganov, I. K.; Talalaev, V. E.; Koluchkin, V. V.

Automatic inspection of security hologram (SH) identity is highly demanded issue due high distribution of SH worldwide to protect documents such as passports, driving licenses, banknotes etc. While most of the known approaches use inspection of SH design features none of these approaches inspect the features of its surface relief that is a direct contribution to original master matrix used for these holograms production. In our previous works we represented the device that was developed to provide SH identification by processing of coherent responses of its surface elements. Most of the algorithms used in this device are based on application of correlation pattern recognition methods. The main issue of the present article is a description of these methods application specificities.

Evaluation of sources, rates and methods of zinc fertilizer applications in flooded rice

International Nuclear Information System (INIS)

Sarkar, A.K.; Deb, D.L.

1981-01-01

A pot experiment was conducted using 65 Zn as tracer to evaluate the different sources, levels and methods of zinc fertilization in flooded rice. Results indicated that zinc sulphate was either at par or slightly superior to zincated urea from the point of view of yield and total zinc uptake by rice. The Zndff percent was found to be the highest with zincated urea and the lowest was observed with zinc oxide. 5 and 10 kg/ha levels of zinc were statistically at par in this regard. Among the different methods, surface application and thorough mixing with soil were comparable. Root dipping in 1 percent zinc oxide suspension and application of zinc in irrigation water also indicated high zinc absorption by the rice plant. (author)

Interpolation method for the transport theory and its application in fusion-neutronics analysis

International Nuclear Information System (INIS)

Jung, J.

1981-09-01

This report presents an interpolation method for the solution of the Boltzmann transport equation. The method is based on a flux synthesis technique using two reference-point solutions. The equation for the interpolated solution results in a Volterra integral equation which is proved to have a unique solution. As an application of the present method, tritium breeding ratio is calculated for a typical D-T fusion reactor system. The result is compared to that of a variational technique

Numerical investigations on contactless methods for measuring critical current density in HTS: application of modified constitutive-relation method

International Nuclear Information System (INIS)

Kamitani, A.; Takayama, T.; Itoh, T.; Ikuno, S.

2011-01-01

A fast method is proposed for calculating the shielding current density in an HTS. The J-E constitutive relation is modified so as not to change the solution. A numerical code is developed on the basis of the proposed method. The permanent magnet method is successfully simulated by means of the code. A fast method has been proposed for calculating the shielding current density in a high-temperature superconducting thin film. An initial-boundary-value problem of the shielding current density cannot be always solved by means of the Runge-Kutta method even when an adaptive step-size control algorithm is incorporated to the method. In order to suppress an overflow in the algorithm, the J-E constitutive relation is modified so that its solution may satisfy the original constitutive relation. A numerical code for analyzing the shielding current density has been developed on the basis of this method and, as an application of the code, the permanent magnet method for measuring the critical current density has been investigated numerically.

Application of an efficient Bayesian discretization method to biomedical data

Directory of Open Access Journals (Sweden)

Gopalakrishnan Vanathi

2011-07-01

Full Text Available Abstract Background Several data mining methods require data that are discrete, and other methods often perform better with discrete data. We introduce an efficient Bayesian discretization (EBD method for optimal discretization of variables that runs efficiently on high-dimensional biomedical datasets. The EBD method consists of two components, namely, a Bayesian score to evaluate discretizations and a dynamic programming search procedure to efficiently search the space of possible discretizations. We compared the performance of EBD to Fayyad and Irani's (FI discretization method, which is commonly used for discretization. Results On 24 biomedical datasets obtained from high-throughput transcriptomic and proteomic studies, the classification performances of the C4.5 classifier and the naïve Bayes classifier were statistically significantly better when the predictor variables were discretized using EBD over FI. EBD was statistically significantly more stable to the variability of the datasets than FI. However, EBD was less robust, though not statistically significantly so, than FI and produced slightly more complex discretizations than FI. Conclusions On a range of biomedical datasets, a Bayesian discretization method (EBD yielded better classification performance and stability but was less robust than the widely used FI discretization method. The EBD discretization method is easy to implement, permits the incorporation of prior knowledge and belief, and is sufficiently fast for application to high-dimensional data.

Data-driven remaining useful life prognosis techniques stochastic models, methods and applications

CERN Document Server

Si, Xiao-Sheng; Hu, Chang-Hua

2017-01-01

This book introduces data-driven remaining useful life prognosis techniques, and shows how to utilize the condition monitoring data to predict the remaining useful life of stochastic degrading systems and to schedule maintenance and logistics plans. It is also the first book that describes the basic data-driven remaining useful life prognosis theory systematically and in detail. The emphasis of the book is on the stochastic models, methods and applications employed in remaining useful life prognosis. It includes a wealth of degradation monitoring experiment data, practical prognosis methods for remaining useful life in various cases, and a series of applications incorporated into prognostic information in decision-making, such as maintenance-related decisions and ordering spare parts. It also highlights the latest advances in data-driven remaining useful life prognosis techniques, especially in the contexts of adaptive prognosis for linear stochastic degrading systems, nonlinear degradation modeling based pro...

Application of finite element method in the solution of transport equation

International Nuclear Information System (INIS)

Maiorino, J.R.; Vieira, W.J.

1985-01-01

It is presented the application of finite element method in the solution of second order transport equation (self-adjoint) for the even parity flux. The angular component is treated by expansion in Legendre polinomials uncoupled of the spatial component, which is approached by an expansion in base functions, interpolated in each spatial element. (M.C.K.) [pt

Assessment of hydrogen fuel cell applications using fuzzy multiple-criteria decision making method

International Nuclear Information System (INIS)

Chang, Pao-Long; Hsu, Chiung-Wen; Lin, Chiu-Yue

2012-01-01

Highlights: ► This study uses the fuzzy MCDM method to assess hydrogen fuel cell applications. ► We evaluate seven different hydrogen fuel cell applications based on 14 criteria. ► Results show that fuel cell backup power systems should be chosen for development in Taiwan. -- Abstract: Assessment is an essential process in framing government policy. It is critical to select the appropriate targets to meet the needs of national development. This study aimed to develop an assessment model for evaluating hydrogen fuel cell applications and thus provide a screening tool for decision makers. This model operates by selecting evaluation criteria, determining criteria weights, and assessing the performance of hydrogen fuel cell applications for each criterion. The fuzzy multiple-criteria decision making method was used to select the criteria and the preferred hydrogen fuel cell products based on information collected from a group of experts. Survey questionnaires were distributed to collect opinions from experts in different fields. After the survey, the criteria weights and a ranking of alternatives were obtained. The study first defined the evaluation criteria in terms of the stakeholders, so that comprehensive influence criteria could be identified. These criteria were then classified as environmental, technological, economic, or social to indicate the purpose of each criterion in the assessment process. The selected criteria included 14 indicators, such as energy efficiency and CO 2 emissions, as well as seven hydrogen fuel cell applications, such as forklifts and backup power systems. The results show that fuel cell backup power systems rank the highest, followed by household fuel cell electric-heat composite systems. The model provides a screening tool for decision makers to select hydrogen-related applications.

Application of numerical methods in spectroscopy : fitting of the curve of thermoluminescence

International Nuclear Information System (INIS)

RANDRIAMANALINA, S.

1999-01-01

The method of non linear least squares is one of the mathematical tools widely employed in spectroscopy, it is used for the determination of parameters of a model. In other hand, the spline function is among fitting functions that introduce the smallest error. It is used for the calculation of the area under the curve. We present an application of these methods, with the details of the corresponding algorithms, to the fitting of the thermoluminescence curve. [fr

Applications, development, and control of methods for the determination of 14C

International Nuclear Information System (INIS)

Svetlik, Ivo; Tomaskova, Lenka; Dreslerova, Dagmar; Michalek, Vaclav

2010-01-01

The methods of determination of 14 C are outlined, and a comparison between the conventional methods and the processing of microsamples with measurement by accelerator mass spectrometry is presented. The assets of the processing of microsamples are highlighted and some applications are described. The development potential of the conventional method which is based on the synthesis of benzene and measurement by LSC at our laboratory is discussed. Currently, our radiocarbon laboratory performs experiments aimed at the processing of microsamples and preparation of graphitized targets. As to the control of the analytical methods, radiocarbon dating using existing dated material for repeated analyses and comparison of dating results with those obtained by other laboratories is a convenient approach

Application of Quasi-Newton methods to the analysis of axisymmetric pressure vessels

International Nuclear Information System (INIS)

Parisi, D.A.C.

1987-01-01

This work studies the application of Quasi-Newton techniques to material nonlinear analysis of axisymmetrical pressure vessels by the finite element method. In the formulation the material bahavior is described by an isotropic elastoplastic model with strain hardening. The continum is discretized through triangular finite elements of axisymmetrical solids with linear interpolation of the displacement field. The incremental governing equations are derived by the virtual work. The solution of the system of simultaneous nonlinear equations is solved iteratively by the Quasi-Newton method employing the BFGS update. The numerical performance of the proposed method is compared with the Newton-Raphson method and some of its variants through some selected examples. (author) [pt

Critical considerations for the application of environmental DNA methods to detect aquatic species

Science.gov (United States)

Goldberg, Caren S.; Turner, Cameron R.; Deiner, Kristy; Klymus, Katy E.; Thomsen, Philip Francis; Murphy, Melanie A.; Spear, Stephen F.; McKee, Anna; Oyler-McCance, Sara J.; Cornman, Robert S.; Laramie, Matthew B.; Mahon, Andrew R.; Lance, Richard F.; Pilliod, David S.; Strickler, Katherine M.; Waits, Lisette P.; Fremier, Alexander K.; Takahara, Teruhiko; Herder, Jelger E.; Taberlet, Pierre

2016-01-01

Species detection using environmental DNA (eDNA) has tremendous potential for contributing to the understanding of the ecology and conservation of aquatic species. Detecting species using eDNA methods, rather than directly sampling the organisms, can reduce impacts on sensitive species and increase the power of field surveys for rare and elusive species. The sensitivity of eDNA methods, however, requires a heightened awareness and attention to quality assurance and quality control protocols. Additionally, the interpretation of eDNA data demands careful consideration of multiple factors. As eDNA methods have grown in application, diverse approaches have been implemented to address these issues. With interest in eDNA continuing to expand, supportive guidelines for undertaking eDNA studies are greatly needed.Environmental DNA researchers from around the world have collaborated to produce this set of guidelines and considerations for implementing eDNA methods to detect aquatic macroorganisms.Critical considerations for study design include preventing contamination in the field and the laboratory, choosing appropriate sample analysis methods, validating assays, testing for sample inhibition and following minimum reporting guidelines. Critical considerations for inference include temporal and spatial processes, limits of correlation of eDNA with abundance, uncertainty of positive and negative results, and potential sources of allochthonous DNA.We present a synthesis of knowledge at this stage for application of this new and powerful detection method.

Modelling with the master equation solution methods and applications in social and natural sciences

CERN Document Server

Haag, Günter

2017-01-01

This book presents the theory and practical applications of the Master equation approach, which provides a powerful general framework for model building in a variety of disciplines. The aim of the book is to not only highlight different mathematical solution methods, but also reveal their potential by means of practical examples. Part I of the book, which can be used as a toolbox, introduces selected statistical fundamentals and solution methods for the Master equation. In Part II and Part III, the Master equation approach is applied to important applications in the natural and social sciences. The case studies presented mainly hail from the social sciences, including urban and regional dynamics, population dynamics, dynamic decision theory, opinion formation and traffic dynamics; however, some applications from physics and chemistry are treated as well, underlining the interdisciplinary modelling potential of the Master equation approach. Drawing upon the author’s extensive teaching and research experience...

Electrostatic force microscopy as a broadly applicable method for characterizing pyroelectric materials

International Nuclear Information System (INIS)

Martin-Olmos, Cristina; Gimzewski, James K; Stieg, Adam Z

2012-01-01

A general method based on the combination of electrostatic force microscopy with thermal cycling of the substrate holder is presented for direct, nanoscale characterization of the pyroelectric effect in a range of materials and sample configurations using commercial atomic force microscope systems. To provide an example of its broad applicability, the technique was applied to the examination of natural tourmaline gemstones. The method was validated using thermal cycles similar to those experienced in ambient conditions, where the induced pyroelectric response produced localized electrostatic surface charges whose magnitude demonstrated a correlation with the iron content and heat dissipation of each gemstone variety. In addition, the surface charge was shown to persist even at thermal equilibrium. This behavior is attributed to constant, stochastic cooling of the gemstone surface through turbulent contact with the surrounding air and indicates a potential utility for energy harvesting in applications including environmental sensors and personal electronics. In contrast to previously reported methods, ours has a capacity to carry out such precise nanoscale measurements with little or no restriction on the sample of interest, and represents a powerful new tool for the characterization of pyroelectric materials and devices. (paper)

Mixed methods research in pedagogy: Characteristics, advantages and difficulties in application

Directory of Open Access Journals (Sweden)

Matović Nataša

2015-01-01

Full Text Available The mixed methods research, as a new type of research, is discussed in the context of re-examining the relation between the two approaches, i.e. the possibility of not opposing, but connecting, combining and integrating them within research. The possibility to use such grounding in research as well could be quite important for pedagogy since the nature of the examined phenomena in this field is such that the majority has both quantitative and qualitative aspects. In order to explain the essence of a mixed methods research, the paper analyses its characteristics, first of all, what elements are combined, what is the nature of the relation between the combined elements and why they are combined, as well as its advantages and difficulties in application. The essential thing in a mixed methods research is the fact that combining refers to the research process as a whole, including the ontological and epistemological assumptions it is based on, which implies that the elements that are combined are understood rather broadly. The advantages and difficulties in application are considered in the context of the discussion of the possibility to combine all research elements, neutralise the limitations of quantitative and qualitative research methodology, implement the complex combining procedures etc. [Projekat Ministarstva nauke Republike Srbije, br. 179060: Modeli procenjivanja i strategije unapređivanja kvaliteta obrazovanja

Essays on Some Recent Penalization Methods with Applications in Finance and Marketing

NARCIS (Netherlands)

G.I. Nalbantov (Georgi)

2008-01-01

textabstractThe subject of this PhD research is within the areas of Econometrics and Artificial Intelligence. More concretely, it deals with the tasks of statistical regression and classification analysis. New classification methods have been proposed, as well as new applications of established ones

A practical sensitivity analysis method for ranking sources of uncertainty in thermal–hydraulics applications

Energy Technology Data Exchange (ETDEWEB)

Pourgol-Mohammad, Mohammad, E-mail: pourgolmohammad@sut.ac.ir [Department of Mechanical Engineering, Sahand University of Technology, Tabriz (Iran, Islamic Republic of); Hoseyni, Seyed Mohsen [Department of Basic Sciences, East Tehran Branch, Islamic Azad University, Tehran (Iran, Islamic Republic of); Hoseyni, Seyed Mojtaba [Building & Housing Research Center, Tehran (Iran, Islamic Republic of); Sepanloo, Kamran [Nuclear Science and Technology Research Institute, Tehran (Iran, Islamic Republic of)

2016-08-15

Highlights: • Existing uncertainty ranking methods prove inconsistent for TH applications. • Introduction of a new method for ranking sources of uncertainty in TH codes. • Modified PIRT qualitatively identifies and ranks uncertainty sources more precisely. • The importance of parameters is calculated by a limited number of TH code executions. • Methodology is applied successfully on LOFT-LB1 test facility. - Abstract: In application to thermal–hydraulic calculations by system codes, sensitivity analysis plays an important role for managing the uncertainties of code output and risk analysis. Sensitivity analysis is also used to confirm the results of qualitative Phenomena Identification and Ranking Table (PIRT). Several methodologies have been developed to address uncertainty importance assessment. Generally, uncertainty importance measures, mainly devised for the Probabilistic Risk Assessment (PRA) applications, are not affordable for computationally demanding calculations of the complex thermal–hydraulics (TH) system codes. In other words, for effective quantification of the degree of the contribution of each phenomenon to the total uncertainty of the output, a practical approach is needed by considering high computational burden of TH calculations. This study aims primarily to show the inefficiency of the existing approaches and then introduces a solution to cope with the challenges in this area by modification of variance-based uncertainty importance method. Important parameters are identified by the modified PIRT approach qualitatively then their uncertainty importance is quantified by a local derivative index. The proposed index is attractive from its practicality point of view on TH applications. It is capable of calculating the importance of parameters by a limited number of TH code executions. Application of the proposed methodology is demonstrated on LOFT-LB1 test facility.

A practical sensitivity analysis method for ranking sources of uncertainty in thermal–hydraulics applications

International Nuclear Information System (INIS)

Pourgol-Mohammad, Mohammad; Hoseyni, Seyed Mohsen; Hoseyni, Seyed Mojtaba; Sepanloo, Kamran

2016-01-01

Highlights: • Existing uncertainty ranking methods prove inconsistent for TH applications. • Introduction of a new method for ranking sources of uncertainty in TH codes. • Modified PIRT qualitatively identifies and ranks uncertainty sources more precisely. • The importance of parameters is calculated by a limited number of TH code executions. • Methodology is applied successfully on LOFT-LB1 test facility. - Abstract: In application to thermal–hydraulic calculations by system codes, sensitivity analysis plays an important role for managing the uncertainties of code output and risk analysis. Sensitivity analysis is also used to confirm the results of qualitative Phenomena Identification and Ranking Table (PIRT). Several methodologies have been developed to address uncertainty importance assessment. Generally, uncertainty importance measures, mainly devised for the Probabilistic Risk Assessment (PRA) applications, are not affordable for computationally demanding calculations of the complex thermal–hydraulics (TH) system codes. In other words, for effective quantification of the degree of the contribution of each phenomenon to the total uncertainty of the output, a practical approach is needed by considering high computational burden of TH calculations. This study aims primarily to show the inefficiency of the existing approaches and then introduces a solution to cope with the challenges in this area by modification of variance-based uncertainty importance method. Important parameters are identified by the modified PIRT approach qualitatively then their uncertainty importance is quantified by a local derivative index. The proposed index is attractive from its practicality point of view on TH applications. It is capable of calculating the importance of parameters by a limited number of TH code executions. Application of the proposed methodology is demonstrated on LOFT-LB1 test facility.

[Hypothesis and application of bimolecular marking methods in Chinese materia medica].

Science.gov (United States)

Huang, Lu-qi; Qian, Dan; Deng, Chao

2015-01-01

Based on the current shortage of genuine/false authentication and quality evaluation in the molecular identification, and the weak functional gene research in the establishment of two-dimensional molecular markering methods for Chinese materia medica, the authors proposed a new method, the bimolecular marking methods (BIMM) for Chinese materia medica, combining DNA marker and metabolomics marker, that could simultaneously research the species and quality differences at the molecular level at the present stage. The authors introduced the concept, principle, methods, and technical process of BIMM, and summarized the technical advantages in this paper. Meanwhile, the application of BIMM in the identification of multiple sources of Chinese materia medica, years-identification, different locations, elite germplasm research, discovery of new drugs resources, protection of new varieties was also discussed. As a supplement of two-dimensional molecular markering method for Chinese materia medica, BIMM would not only expand connotation of identification of Chinese materia medica but also provide another effective way for quality evaluating.

Biomedical applications of two- and three-dimensional deterministic radiation transport methods

International Nuclear Information System (INIS)

Nigg, D.W.

1992-01-01

Multidimensional deterministic radiation transport methods are routinely used in support of the Boron Neutron Capture Therapy (BNCT) Program at the Idaho National Engineering Laboratory (INEL). Typical applications of two-dimensional discrete-ordinates methods include neutron filter design, as well as phantom dosimetry. The epithermal-neutron filter for BNCT that is currently available at the Brookhaven Medical Research Reactor (BMRR) was designed using such methods. Good agreement between calculated and measured neutron fluxes was observed for this filter. Three-dimensional discrete-ordinates calculations are used routinely for dose-distribution calculations in three-dimensional phantoms placed in the BMRR beam, as well as for treatment planning verification for live canine subjects. Again, good agreement between calculated and measured neutron fluxes and dose levels is obtained

Development of interface tracking method. Two-phase flows applications; Developpement d'une methode de suivi d'interface. Applications aux ecoulements diphasiques

Energy Technology Data Exchange (ETDEWEB)

Tanguy, S.

2004-11-15

Spray formation mechanisms study from a liquid-gas flow is a fundamental research subject, which industrial applications are large, especially in combustion and propulsion field. Numerical simulation of such flows appear as an essential complement to experimental and theoretical studies, for comprehension and accurate prediction of such physical processes. In this study we developed an numerical interface tracking technique with a Navier-Stokes solver to study accurately the liquid-gas interface dynamics. We describe Level Set method which has been used to track interface motion, and numerical methods for solving Navier-Stokes equations. Different numerical schemes have been tested to improve the computation accuracy. Ghost Fluid Method enables a robust and accurate treatment of discontinuities across the liquid-gas interface. The codes developed (2D, 3D, parallelization MPI) are then used to study droplets collisions. Comparisons with experimental results show that simulations are realistic and predictive. Next, feasibility studies are done on more complex configurations. Droplets spray formation from primary atomization of a liquid jet seems to be especially a promising investigation field for such simulations. Finally, reactive interfaces propagation, as liquid vaporization and premixed combustion have also been studied using Ghost Fluid Method to impose specific jump conditions. (author)

Application of fuzzy decision-making method in nuclear emergency

International Nuclear Information System (INIS)

Xu Zhixin; Xi Shuren; Qu Jingyuan

2005-01-01

Protective actions such as evacuation, sheltering and iodine administration can be taken to mitigate the radiological consequence in the event of an accidental release. In general, decision-making of countermeasures involves both quantitative and qualitative criteria. The conventional approaches to assessing these criteria tend to be less effective when dealing with those qualitative criteria that are imprecise or vague. In this regard, fuzzy set method is an alternative tool. It can cope with vague assessment in a better way. This paper presents the application of fussy methodology to decision-making of protective actions in nuclear emergencies. In this method linguistic terms and fuzzy triangular numbers are used to represent decision-maker's subjective assessment for different decision criteria considered and decision alternatives versus the decision criteria. Following the assessment performed by specialists, corresponding evaluations can be synthesized and ranked. Finally, the optimal strategy for implementing protective actions can be recommended. (authors)

Transition metal-catalyzed couplings of alkynes to 1,3-enynes: modern methods and synthetic applications.

Science.gov (United States)

Trost, Barry M; Masters, James T

2016-04-21

The metal-catalyzed coupling of alkynes is a powerful method for the preparation of 1,3-enynes, compounds that are of broad interest in organic synthesis. Numerous strategies have been developed for the homo- and cross coupling of alkynes to enynes via transition metal catalysis. In such reactions, a major issue is the control of regio-, stereo-, and, where applicable, chemoselectivity. Herein, we highlight prominent methods for the selective synthesis of these valuable compounds. Further, we illustrate the utility of these processes through specific examples of their application in carbocycle, heterocycle, and natural product syntheses.

The separation-combination method of linear structures in remote sensing image interpretation and its application

International Nuclear Information System (INIS)

Liu Linqin

1991-01-01

The separation-combination method a new kind of analysis method of linear structures in remote sensing image interpretation is introduced taking northwestern Fujian as the example, its practical application is examined. The practice shows that application results not only reflect intensities of linear structures in overall directions at different locations, but also contribute to the zonation of linear structures and display their space distribution laws. Based on analyses of linear structures, it can provide more information concerning remote sensing on studies of regional mineralization laws and the guide to ore-finding combining with mineralization

The effect of the rate and method of nitrogen application on nitrogen uptake and utilization by broccoli (Brassica oleracea var. italica)

NARCIS (Netherlands)

Everaarts, A.P.; Willigen, de P.

1999-01-01

The effect of the rate and method of nitrogen application on nitrogen uptake and utilization by broccoli (Brassica oleracea var. italica) was studied in four field experiments. The methods of application were broadcast application vs band placement and split application. Maximum uptake of nitrogen

Applicability of simplified methods to evaluate consequences of criticality accident using past accident data

International Nuclear Information System (INIS)

Nakajima, Ken

2003-01-01

Applicability of four simplified methods to evaluate the consequences of criticality accident was investigated. Fissions in the initial burst and total fissions were evaluated using the simplified methods and those results were compared with the past accident data. The simplified methods give the number of fissions in the initial burst as a function of solution volume; however the accident data did not show such tendency. This would be caused by the lack of accident data for the initial burst with high accuracy. For total fissions, simplified almost reproduced the upper envelope of the accidents. However several accidents, which were beyond the applicable conditions, resulted in the larger total fissions than the evaluations. In particular, the Tokai-mura accident in 1999 gave in the largest total specific fissions, because the activation of cooling system brought the relatively high power for a long time. (author)