WorldWideScience

Sample records for spotted gum corymbia

  1. Selection of Corymbia citriodora for pulp productivity | Brawner ...

    African Journals Online (AJOL)

    Evaluation of a series of spotted gum (Corymbia citirodora) progeny trials, established in the subtropical region of Queensland, Australia, was undertaken to provide information for the development of advanced-generation breeding populations suitable for pulp production. Measurements of growth at two ages were ...

  2. Occurrence of gum spots in black cherry after partial harvest cutting

    Science.gov (United States)

    Charles O. Rexrode; H. Clay Smith; H. Clay Smith

    1990-01-01

    Bark beetles, primarily the bark beetle Phlosotribus liminori (Harris), are the major cause of gum spots in sawtimber-size black cherry Prunus serotina Ehrh. Approximately 90 percent of all gum spots in the bole sections are caused by bark beetles. Gum spots were studied in 95 black cherry trees near Parsons, West Virginia. Over 50 percent of the bark beetle-caused gum...

  3. Estimation of taper rates and volume of smaller-sized logs in spotted ...

    African Journals Online (AJOL)

    Spotted gum (Corymbia citriodora subsp. variegata) is a popular tree species for hardwood saw timber plantations in Southeast Queensland (SEQ), Australia. In many parts of the world, logs up to 10cm top diameter are considered to be merchantable logs and acceptable at sawmills. However, due to the higher handling ...

  4. Nicotine Gum

    Science.gov (United States)

    Nicotine chewing gum is used to help people stop smoking cigarettes. Nicotine chewing gum should be used together with a ... support groups, counseling, or specific behavioral change techniques. Nicotine gum is in a class of medications called ...

  5. Gums - swollen

    Science.gov (United States)

    ... Swollen gums may be caused by: Inflamed gums ( gingivitis ) Infection by a virus or fungus Malnutrition Poorly ... 2015:chap 12. Chow AW. Infections of the oral cavity, neck, and head. In: Bennett JE, Dolin R, Blaser MJ, eds. ... Health Topics A-Z Read more A.D.A. ...

  6. Bleeding gums

    Science.gov (United States)

    ... line. This will lead to a condition called gingivitis , or inflamed gums. Plaque that is not removed ... deficiency, take vitamin supplements. Avoid aspirin unless your health care ... doctor. Use an oral irrigation device on the low setting to massage ...

  7. Gum Disease Symptoms

    Science.gov (United States)

    ... Alcohol Consumption and Gum Health Workshop on Regeneration Periodontal Disease More Prevalent among Ethnic Minorities Dental Implants Periodontal Health and Diabetes Periodontal Health and Pregnancy ...

  8. Gum Disease and Women

    Science.gov (United States)

    ... Alcohol Consumption and Gum Health Workshop on Regeneration Periodontal Disease More Prevalent among Ethnic Minorities Dental Implants Periodontal Health and Diabetes Periodontal Health and Pregnancy ...

  9. Chloroplast genome analysis of Australian eucalypts--Eucalyptus, Corymbia, Angophora, Allosyncarpia and Stockwellia (Myrtaceae).

    Science.gov (United States)

    Bayly, Michael J; Rigault, Philippe; Spokevicius, Antanas; Ladiges, Pauline Y; Ades, Peter K; Anderson, Charlotte; Bossinger, Gerd; Merchant, Andrew; Udovicic, Frank; Woodrow, Ian E; Tibbits, Josquin

    2013-12-01

    We present a phylogenetic analysis and comparison of structural features of chloroplast genomes for 39 species of the eucalypt group (genera Eucalyptus, Corymbia, Angophora, and outgroups Allosyncarpia and Stockwellia). We use 41 complete chloroplast genome sequences, adding 39 finished-quality chloroplast genomes to two previously published genomes. Maximum parsimony and Bayesian analyses, based on >7000 variable nucleotide positions, produced one fully resolved phylogenetic tree (35 supported nodes, 27 with 100% bootstrap support). Eucalyptus and its sister lineage Angophora+Corymbia show a deep divergence. Within Eucalyptus, three lineages are resolved: the 'eudesmid', 'symphyomyrt' and 'monocalypt' groups. Corymbia is paraphyletic with respect to Angophora. Gene content and order do not vary among eucalypt chloroplasts; length mutations, especially frame shifts, are uncommon in protein-coding genes. Some non-synonymous mutations are highly incongruent with the overall phylogenetic signal, notably in rbcL, and may be adaptive. Application of custom informatics pipelines (GYDLE Inc.) enabled direct chloroplast genome assembly, resolving each genome to finished-quality with no need for PCR gap-filling or contig order resolution. Analysis of whole chloroplast genomes resolved major eucalypt clades and revealed variable regions of the genome that will be useful in lower-level genetic studies (including phylogeography and geneflow). Copyright © 2013 Elsevier Inc. All rights reserved.

  10. Evaluation of Relationships between Growth Rate, Tree Size, Lignocellulose Composition, and Enzymatic Saccharification in Interspecific Corymbia Hybrids and Parental Taxa

    Science.gov (United States)

    Healey, Adam L.; Lee, David J.; Lupoi, Jason S.; Papa, Gabriella; Guenther, Joel M.; Corno, Luca; Adani, Fabrizio; Singh, Seema; Simmons, Blake A.; Henry, Robert J.

    2016-01-01

    In order for a lignocellulosic bioenergy feedstock to be considered sustainable, it must possess a high rate of growth to supply biomass for conversion. Despite the desirability of a fast growth rate for industrial application, it is unclear what effect growth rate has on biomass composition or saccharification. We characterized Klason lignin, glucan, and xylan content with response to growth in Corymbia interspecific F1 hybrid families (HF) and parental species Corymbia torelliana and C. citriodora subspecies variegata and measured the effects on enzymatic hydrolysis from hydrothermally pretreated biomass. Analysis of biomass composition within Corymbia populations found similar amounts of Klason lignin content (19.7–21.3%) among parental and hybrid populations, whereas glucan content was clearly distinguished within C. citriodora subspecies variegata (52%) and HF148 (60%) as compared to other populations (28–38%). Multiple linear regression indicates that biomass composition is significantly impacted by tree size measured at the same age, with Klason lignin content increasing with diameter breast height (DBH) (+0.12% per cm DBH increase), and glucan and xylan typically decreasing per DBH cm increase (-0.7 and -0.3%, respectively). Polysaccharide content within C. citriodora subspecies variegata and HF-148 were not significantly affected by tree size. High-throughput enzymatic saccharification of hydrothermally pretreated biomass found significant differences among Corymbia populations for total glucose production from biomass, with parental Corymbia torelliana and hybrids HF-148 and HF-51 generating the highest amounts of glucose (~180 mg/g biomass, respectively), with HF-51 undergoing the most efficient glucan-to-glucose conversion (74%). Based on growth rate, biomass composition, and further optimization of enzymatic saccharification yield, high production Corymbia hybrid trees are potentially suitable for fast-rotation bioenergy or biomaterial production

  11. Xanthan - A Versatile Gum

    Indian Academy of Sciences (India)

    transfer agents. ... Why do Microorganisms Produce Gums? .... also useful for xanthan production. GENERAL I ARTICLE. In the biosynthesis of xanthan on the cabbage plant by X. campestris, the cabbage provides the carbohydrate substrates,.

  12. Effect of eucalyptus oil (Corymbia citriodora) on the control of cattle ticks

    OpenAIRE

    Olivo, Clair Jorge; Agnolin, Carlos Alberto; Parra, Carla Lieda Cezimbra; Vogel, Fernanda Silveira Flores; Richards, Neila Silvia Pereira dos Santos; Pellegrini, Luiz Gustavo de; Webe, Augusto; Pivoto, Felipe; Araujo, Luciana

    2013-01-01

    Esta pesquisa foi conduzida com o objetivo de avaliar o efeito in vitro e in vivo do óleo de eucalipto (Corymbia citriodora) sobre o carrapato bovino (Rhipicephalus (Boophilus) microplus). Na experimentação in vitro, foi utilizado o grupo controle negativo e oito concentrações de óleo de eucalipto (0,5; 1; 2; 5; 10; 20; 50; 100%), em fêmeas ingurgitadas de carrapato. A eficácia de controle foi de 0; 30,5; 75,5; 91; 100; 100; 100; 100 e 100%, respectivamente. Para a experimentação in vivo, for...

  13. 21 CFR 184.1349 - Karaya gum (sterculia gum).

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Karaya gum (sterculia gum). 184.1349 Section 184.1349 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... (sterculia gum) is the dried gummy exudate from the trunk of trees of various species of the genus Sterculia...

  14. Xanthan - A Versatile Gum

    Indian Academy of Sciences (India)

    Why do Microorganisms Produce Gums? .... soybean whey are also useful for xanthan production. GENERAL I ARTICLE. In the biosynthesis of xanthan on the cabbage plant by X. campestris, the cabbage provides the carbohydrate substrates, ... a yellow pigment in the wall, which is extractable only with organic solvents.

  15. Growth of seedlings of Corymbia citriodora as a function of hydrogel use and fertilization

    Directory of Open Access Journals (Sweden)

    Marlon Rodrigo Bernardi

    2012-03-01

    Full Text Available Corymbia citriodora, also known as lemon eucalyptus, is one of the most cultivated species for extraction of essential oils. Seedling production for this species, however, is more difficult than for other species, considering its slower growth, higher susceptibility to disease and nutrition requirements. As regards top dressing in particular, no established routine is available so far to ensure fertilizer savings and good seedling development. Slow growth reduces seedling capability to absorb nutrients before leaching starts, and a potential alternative to that is to add water-retaining polymers to the substrate so as to facilitate absorption of the fertilizers applied and their slow release in seedling tubes. The objective of this study was to evaluate the effect of different fertilizer dosages, as applied to substrates containing water-retaining polymers, on the growth of Corymbia citriodora seedlings. A completely randomized design was used, with four replicates, consisting of a control treatment with routine substrate and fertilizer used by a commercial nursery, plus five treatments with top dressing dosages ranging from 80% to 20% of commercial dosage plus addition of a polymer (6 g L-1. After 126 days, seedlings were evaluated for height, stem base diameter and ratio of height to stem base diameter. After analysis, it was concluded that the use of a water-retaining polymer had a positive effect on the height, stem base diameter and ratio of shoot height to stem base diameter, and that it helped reduce by at least 20% the amount of routine fertilizer used by the commercial nursery, whether basic fertilizer or top dressing.

  16. Evaluation of Relationships between Growth Rate, Tree Size, Lignocellulose Composition, and Enzymatic Saccharification in Interspecific Corymbia Hybrids and Parental Taxa

    OpenAIRE

    Healey, Adam L.; Lee, David J.; Lupoi, Jason S.; Papa, Gabriella; Guenther, Joel M.; Corno, Luca; Adani, Fabrizio; Singh, Seema; Simmons, Blake A.; Henry, Robert J.

    2016-01-01

    © 2016 Healey,Lee,Lupoi,Papa,Guenther,Corno,Adani,Singh,Simmons and Henry. In order for a lignocellulosic bioenergy feedstock to be considered sustainable,it must possess a high rate of growth to supply biomass for conversion. Despite the desirability of a fast growth rate for industrial application,it is unclear what effect growth rate has on biomass composition or saccharification. We characterized Klason lignin,glucan,and xylan content with response to growth in Corymbia interspecific F1 h...

  17. Evaluation of relationships between growth rate, tree size, lignocellulose composition and enzymatic saccharification in interspecific Corymbia hybrids and parental taxa.

    OpenAIRE

    Adam L Healey; David John Lee; David John Lee; Jason S Lupoi; Gabriella Papa; Joel M Guenther; Joel M Guenther; Luca Corno; Fabrizio Adani; Seema Singh; Seema Singh; Blake Simmons; Blake Simmons; Robert Henry

    2016-01-01

    In order for a lignocellulosic bioenergy feedstock to be considered sustainable, it must possess a high rate of growth to supply biomass for conversion. Despite the desirability of a fast growth rate for industrial application, it is unclear what effect growth rate has on biomass composition or saccharification. We characterized Klason lignin, glucan, and xylan content with response to growth in Corymbia interspecific F1 hybrid families (HF) and parental species C. torelliana (CT) and C. citr...

  18. Fumigant Antifungal Activity of Corymbia citriodora and Cymbopogon nardus Essential Oils and Citronellal against Three Fungal Species

    OpenAIRE

    Raimundo Wagner de S. Aguiar; Marcio A. Ootani; Sérgio Donizeti Ascencio; Talita P. S. Ferreira; Manoel M. dos Santos; Gil R. dos Santos

    2014-01-01

    Corymbia citriodora and Cymbopogon nardus essential oils samples were analyzed by GC and GC-MS and their qualitative and quantitative compositions established. The main component of essential oils of C. citriodora and C. nardus was citronellal, at 61.78% and 36.6%, respectively. The essential oils and citronellal were tested for their fumigant antifungal activity against Pyricularia (Magnaporthe) grisea, Aspergillus spp., and Colletotrichum musae. The minimum inhibitory concentration (MIC) ra...

  19. Evaluation of relationships between growth rate, tree size, lignocellulose composition and enzymatic saccharification in interspecific Corymbia hybrids and parental taxa.

    Directory of Open Access Journals (Sweden)

    Adam L Healey

    2016-11-01

    Full Text Available In order for a lignocellulosic bioenergy feedstock to be considered sustainable, it must possess a high rate of growth to supply biomass for conversion. Despite the desirability of a fast growth rate for industrial application, it is unclear what effect growth rate has on biomass composition or saccharification. We characterized Klason lignin, glucan, and xylan content with response to growth in Corymbia interspecific F1 hybrid families (HF and parental species C. torelliana (CT and C. citriodora subspecies variegata (CCV and measured the effects on enzymatic hydrolysis from hydrothermally pretreated biomass. Analysis of biomass composition within Corymbia populations found similar amounts of Klason lignin content (19.7-21.3% among parental and hybrid populations, whereas glucan content was clearly distinguished within CCV (52% and HF148 (60% as compared to other populations (28-38%. Multiple linear regression indicates that biomass composition is significantly impacted by tree size measured at the same age, with Klason lignin content increasing with diameter breast height (DBH (+0.12% per cm DBH increase, and glucan and xylan typically decreasing per DBH cm increase (-0.7% and -0.3%, respectively. Polysaccharide content within CCV and HF-148 were not significantly affected by tree size. High-throughput enzymatic saccharification of hydrothermally pretreated biomass found significant differences among Corymbia populations for total glucose production from biomass, with parental CT and hybrids HF-148 and HF-51 generating the highest amounts of glucose (~180 mg/g biomass, respectively, with HF-51 undergoing the most efficient glucan-to-glucose conversion (74%. Based on growth rate, biomass composition, and further optimization of enzymatic saccharification yield, high production Corymbia hybrid trees are potentially suitable for fast-rotation bioenergy or biomaterial production.

  20. Efeito do óleo de eucalipto (Corymbia citriodora no controle do carrapato bovino Effect of eucalyptus oil (Corymbia citriodora on the control of cattle ticks

    Directory of Open Access Journals (Sweden)

    Clair Jorge Olivo

    2013-02-01

    Full Text Available Esta pesquisa foi conduzida com o objetivo de avaliar o efeito in vitro e in vivo do óleo de eucalipto (Corymbia citriodora sobre o carrapato bovino (Rhipicephalus (Boophilus microplus. Na experimentação in vitro, foi utilizado o grupo controle negativo e oito concentrações de óleo de eucalipto (0,5; 1; 2; 5; 10; 20; 50; 100%, em fêmeas ingurgitadas de carrapato. A eficácia de controle foi de 0; 30,5; 75,5; 91; 100; 100; 100; 100 e 100%, respectivamente. Para a experimentação in vivo, foram constituídos três grupos (controle negativo; óleo de eucalipto a 3,5% - nível estimado mediante análise de regressão, correspondendo a 95% de eficácia de controle do carrapato da pesquisa in vitro e amitraz a 0,025%, com dezoito vacas da raça Holandesa. Antes (média dos dias -3, -2,-1 e após a aplicação do produto (1, 2, 3, 5, 7, 10, 14, 21dias, foram contadas fêmeas ingurgitadas de carrapato. A eficácia de controle foi de 0; 96,4 e 69%, respectivamente, 21 dias após o tratamento. Na 1ª e na 2ª ordenha após a aplicação dos tratamentos, foram avaliadas variáveis fisiológicas e coletadas amostras de leite para avaliar as propriedades organolépticas no leite e no iogurte (controle negativo x tratamento fitoterápico. O teste de aceitação sensorial do leite e das variáveis fisiológicas avaliadas foram similares entre os tratamentos.This research was aimed at evaluating in vitro and in vivo effects of eucalyptus (Corymbia citriodora oil on cattle ticks (Rhipicephalus (Boophilus microplus. Negative control group and eight concentrations of eucalyptus oil (0.5; 1; 2; 5; 10; 20; 50; 100%, were used on in vitro trials with engorged female ticks. The efficacy of control ticks was 0; 30.5; 75.5; 91; 100; 100; 100; 100 and 100%, respectively. At the in vivo trial eighteen Holstein cows were allocated to three groups (negative control, eucalyptus oil at 3.5% - level estimated by regression analysis, accounting for 95% efficacy of

  1. [Comparison of the water consumption characteristics of Eucalyptus and Corymbia clone seedlings and the local indigenous tree species Bischofia javanica].

    Science.gov (United States)

    Hua, Lei; He, Qian; Li, Ji-Yue; Liu, Shan; Yu, Fei

    2014-06-01

    The water consumption, water consumption rate, net photosynthetic rate (Pn), transpiration rate (Tr) and water use efficiency (WUE) of Eucalyptus urophylla x E. grandis DH33-27, E. urophylla x E. grandis DH32-29, E. grandis H1, Corymbia ptychocarpa and an indigenous tree species Bischofia javanica were studied in normal soil moisture condition. The average daily water consumption of the five tree species was in the order of E. urophylla x E. grandis DH32-29 (188.47 +/- 14. 91) g > E. urophylla x E. grandis DH33-27 (169.27 +/- 16.26) g > E. grandis H1 (118.65 +/- 5.32) g > B. javanica (38.12 +/- 1.46) g > C. ptychocarpa (20.13 +/- 1.72) g, which had obviously positive correlation with the total leaf area of each seedling. The water consumption was mostly in the daytime, which took 90% of the whole day water consumption. The daily change of the water consumption rates of 5 kinds of seedlings followed the curve with one peak at 12:00-14:00. The total water consumption ability of Eucalyptus and Corymbia was higher than that of B. javanica. The water consumption rate of C. ptychocarpa was far higher than that of the other 4 kinds of seedlings, so its large area planting should be given full consideration to this issue. The change in water consumption rate of E. urophylla x E. grandis DH33-27 was mostly impacted by environmental temperature and humidity, because its water consumption rate was the smallest among 4 kinds of Eucalyptus and Corymbia seedlings during the daytime with high temperature and low humidity. The four clone seedlings of Eucalyptus and Corymbia showed higher photosynthetic rates and transpiration rates compared with B. javanica. Two clone seedlings of E. urophylla x E. grandis had better water-saving performance. The WUE of Eucalyptus and Corymbia was higher than that of B. javanica in general, except E. urophylla x E. Grandis DH33-27.

  2. Chewing gums for optimal health

    Directory of Open Access Journals (Sweden)

    Nidhi Madan

    2011-01-01

    Full Text Available This article elaborates on the general aspects and health benefits of chewing gum. Chewing gums have been used since the time of prehistoric man as a source of entertainment and relaxation. It has also become a trendsetter with the teenagers. Currently, the health benefits of chewing gums are being studied and used in the treatment of various diseases. Certain medications have also been included in gums to act as an alternative drug delivery system. These gums have been found to be successful for the treatment of diseases, such as peptic ulcers, upper digestive tract cancer, oral candidiasis, and so on. It helps to relieve symptoms of xerostomia, Parkinsonism, tooth sensitivity after bleaching, and oral malodor. It helps in maintaining oral health, relieves stress, helps in weight loss, and improves alertness. Chewing gum may be distracting and irritating in numerous social environments, including schools, colleges, and the workplace. Research into the social effects of chewing gums is also necessary to further our knowledge into the psychosocial aspects of these gums.

  3. Simulation of the use of wooden floors of Eucalyptus sp and Corymbia maculate

    Directory of Open Access Journals (Sweden)

    Marcelo Martins

    2013-03-01

    Full Text Available The anatomic, physical, mechanical and chemical characterization of wood provides important information for the indication of its best usage. However, to make these woods possible to become a good option in the wooden floors market, it is necessary to perform tests that simulate the real conditions of their practical use. These tests simulate the stomping of high-heeled shoes with small pressure areas, the dragging and falling of objects, the resistance to the surface abrasion and the friction offered during the walking of people. The difficulty of selection of new wood to manufacture floors is in the absence of specific physical-mechanical reference values. The present work intended to characterize the Eucalyptus clöeziana F. Muell, Eucalyptus microcorys F. Muell and Corymbia maculata Hook woods, regarding the properties of basic density, shrinkage, application of rolling roll, of static and dynamic friction, denting caused by loads applied on small areas, impact of falling steel sphere and resistance to abrasion. It was noticed that the woods may be used to the manufacturing of floors, according to results obtained and through comparisons with literature results.

  4. Production of Gum from Cashew Tree Latex

    Directory of Open Access Journals (Sweden)

    O. S. AZEEZ

    2005-06-01

    Full Text Available This research is aimed at producing gum from cashew tree latex, which can act as substitute for gum Arabic. The method used include drying and size reduction of the exudates gum, sieving of the gum to remove impurities, dissolution of the gum in distilled water, filtration to remove polysaccharide waste and finally concentration and stability of the gum. Glycerine, starch and Zinc oxide are some of the additives used in stabilizing the gum. The pH and Viscosity on addition of various percentage concentration of stabilizing agent were determined. Gum of the best quality was obtained with viscosity and pH of 4.52 Ns/m2 and 4.2 respectively; this is because the natural pH of gum from Acacia Senegal ranges between 3.9 - 4.9. The gum can be used as an alternative for synthetic adhesive used presently for stamps and envelopes.

  5. Gum chewing during pre-anesthetic fasting.

    Science.gov (United States)

    Poulton, Thomas J

    2012-03-01

    Many ad hoc fasting guidelines for pre-anesthetic patients prohibit gum chewing. We find no evidence that gum chewing during pre-anesthetic fasting increases the volume or acidity of gastric juice in a manner that increases risk, nor that the occasional associated unreported swallowing of gum risks subsequent aspiration. On the contrary, there is evidence that gum chewing promotes gastrointestinal motility and physiologic gastric emptying. Recommendations against pre-anesthetic gum chewing do not withstand scrutiny and miss an opportunity to enhance comfort and sense of wellbeing for patients awaiting anesthesia. Gum chewing during the pre-anesthetic nil per os (NPO) period would also permit the development of gum-delivered premedications and should be permitted in children old enough to chew gum safely. Gum chewing should cease when sedatives are given and all patients should be instructed to remove any chewing gum from the mouth immediately prior to anesthetic induction. © 2011 Blackwell Publishing Ltd.

  6. Host tree influences on longicorn beetle (Coleoptera: Cerambycidae) attack in subtropical Corymbia (Myrtales: Myrtaceae).

    Science.gov (United States)

    Nahrung, Helen F; Smith, Timothy E; Wiegand, Aaron N; Lawson, Simon A; Debuse, Valerie J

    2014-02-01

    Phoracantha longicorn beetles are endemic to Australia, and some species have become significant pests of eucalypts worldwide, yet little is known about their host plant interactions and factors influencing tree susceptibility in Australia. Here, we investigate the host relationships of Phoracantha solida (Blackburn, 1894) on four eucalypt taxa (one pure species and three hybrid families), examining feeding site physical characteristics including phloem thickness, density, and moisture content, and host tree factors such as diameter, height, growth, taper, and survival. We also determine the cardinal and vertical (within-tree) and horizontal (between-tree) spatial distribution of borers. Fewer than 10% of P. solida attacks were recorded from the pure species (Corymbia citriodora subsp. variegate (Hook)), and this taxon also showed the highest survival, phloem thickness, relative growth rate, and bark:wood area. For the two most susceptible taxa, borer severity was negatively correlated with moisture content, and positively related to phloem density. Borers were nonrandomly and nonuniformly distributed within trees, and were statistically aggregated in 32% of plots. More attacks were situated on the northern side of the tree than the other aspects, and most larvae fed within the lower 50 cm of the bole, with attack height positively correlated with severity. Trees with borers had more dead neighbors, and more bored neighbors, than trees without borers, while within plots, borer incidence and severity were positively correlated. Because the more susceptible taxa overlapped with less susceptible taxa for several physical tree factors, the role of primary and secondary chemistries in determining host suitability needs to be investigated. Nevertheless, taxon, moisture content, phloem density, tree size, and mortality of neighboring trees appeared the most important physical characteristics influencing host suitability for P. solida at this site.

  7. Bioactivity of essential oils extracted from Cupressus macrocarpa branchlets and Corymbia citriodora leaves grown in Egypt.

    Science.gov (United States)

    Salem, Mohamed Z M; Elansary, Hosam O; Ali, Hayssam M; El-Settawy, Ahmed A; Elshikh, Mohamed S; Abdel-Salam, Eslam M; Skalicka-Woźniak, Krystyna

    2018-01-22

    Cupressus macrocarpa Hartw and Corymbia citriodora (Hook.) K.D. Hill & L.A.S. Johnson, widely grown in many subtropical areas, are used for commercial purposes, such as in perfumery, cosmetics, and room fresheners. Their potential as a source of antimicrobial compounds may be useful in different applications. The chemical composition of essential oils (EOs) from C. macrocarpa branchlets and C. citriodora leaves was analyzed by using gas chromatography-mass spectrometry (GC/MS). Antibacterial and antifungal activities were assessed by the micro-dilution method to determine the minimum inhibitory concentrations (MICs), and minimum fungicidal concentrations (MFCs), and minimum bactericidal concentrations (MBCs). Further, the antioxidant capacity of the EOs was determined via 2,2'-diphenypicrylhydrazyl (DPPH) and β-carotene-linoleic acid assays. Terpinen-4-ol (23.7%), α-phellandrene (19.2%), α-citronellol (17.3%), and citronellal were the major constituents of EO from C. macrocarpa branchlets, and α-citronellal (56%), α-citronellol (14.7%), citronellol acetate (12.3%), isopulegol, and eucalyptol were the primary constituents of EO from C. citriodora leaves. Antibacterial activity with MIC values of EO from C. citriodora leaves was ranged from 0.06 mg/mL to 0.20 mg/mL, and MBC from 0.12 mg/mL against E. coli to 0.41 mg/mL. EO from C. macrocarpa branchlets showed less activity against bacterial strains. The MIC values against tested fungi of the EO from C. citriodora ranged from 0.11 to 0.52 mg/mL while for EO from C. macrocarpa from 0.29 to 3.21 mg/mL. The MIC and MFC values of EOs against P. funiculosum were lower than those obtained from Ketoconazole (KTZ) (0.20; 0.45; 0.29 and 0.53 mg/mL, respectively, vs 0.21 and 0.41 mg/mL. Antioxidant activity of the EO from C. citriodora was higher than that of the positive control but lower than that of the standard butylhydroxytoluene (BHT) (IC 50  = 5.1 ± 0.1 μg/mL). The results indicate that the EO

  8. Take Care of Your Teeth and Gums

    Science.gov (United States)

    ... drink alcohol, drink only in moderation. What causes tooth decay and gum disease? Plaque (“plak”) is a sticky ... your teeth too long, it can lead to tooth decay and gum disease. Brushing and flossing help get ...

  9. Diabetes, Gum Disease, and Other Dental Problems

    Science.gov (United States)

    ... sugars or starches. Some types of plaque cause tooth decay or cavities. Other types of plaque cause gum ... in your mouth, which raises your risk for tooth decay and gum disease dry feeling in your mouth, ...

  10. Elastic properties of Gum Metal

    International Nuclear Information System (INIS)

    Kuramoto, Shigeru; Furuta, Tadahiko; Hwang, Junghwan; Nishino, Kazuaki; Saito, Takashi

    2006-01-01

    In situ X-ray diffraction measurements under tensile loading and dynamic mechanical analysis were performed to investigate the mechanisms of elastic deformation in Gum Metal. Tensile stress-strain curves for Gum Metal indicate that cold working substantially decreases the elastic modulus while increasing the yield strength, thereby confirming nonlinearity in the elastic range. The gradient of each curve decreased continuously to about one-third its original value near the elastic limit. As a result of this decrease in elastic modulus and nonlinearity, elastic deformability reaches 2.5% after cold working. Superelasticity is attributed to stress-induced martensitic transformations, although the large elastic deformation in Gum Metal is not accompanied by a phase transformation

  11. Oral health benefits of chewing gum

    NARCIS (Netherlands)

    Wessel, Stefan

    2016-01-01

    In the last decades sugar-free chewing gum has developed in an oral healthcare product, next to the conventional products such as the toothbrush and mouthrinses. In this thesis we investigate the oral health benefits of chewing gum and the effects of additives to chewing gum, such as antimicrobials.

  12. The CT appearance of intraoral chewing gum

    Energy Technology Data Exchange (ETDEWEB)

    Towbin, Alexander J. [Cincinnati Children' s Hospital Medical Center, Department of Radiology, Cincinnati, OH (United States)

    2008-12-15

    When imaged, intraoral chewing gum has the potential to be misdiagnosed. Chewing gum has a characteristic appearance on CT: it is ovoid in shape, hyperdense, and has small internal locules of air. Reports have described the appearance of gum on radiographs and abdominal CT images; however, no reports could be found detailing its appearance within the mouth. This report describes the appearance of intraoral chewing gum as well as the properties of the gum that lead to this appearance. Because of the potential for misdiagnosis, screening for intraoral foreign bodies should be considered prior to imaging. (orig.)

  13. Xanthan-A Versatile Gum

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 9; Issue 10. Xanthan – A Versatile Gum. Anil Lachke. General Article Volume 9 Issue 10 October 2004 pp 25-33. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/009/10/0025-0033. Keywords. Xanthan ...

  14. GumTree: Data reduction

    International Nuclear Information System (INIS)

    Rayner, Hugh; Hathaway, Paul; Hauser, Nick; Fei, Yang; Franceschini, Ferdi; Lam, Tony

    2006-01-01

    Access to software tools for interactive data reduction, visualisation and analysis during a neutron scattering experiment enables instrument users to make informed decisions regarding the direction and success of their experiment. ANSTO aims to enhance the experiment experience of its facility's users by integrating these data reduction tools with the instrument control interface for immediate feedback. GumTree is a software framework and application designed to support an Integrated Scientific Experimental Environment, for concurrent access to instrument control, data acquisition, visualisation and analysis software. The Data Reduction and Analysis (DRA) module is a component of the GumTree framework that allows users to perform data reduction, correction and basic analysis within GumTree while an experiment is running. It is highly integrated with GumTree, able to pull experiment data and metadata directly from the instrument control and data acquisition components. The DRA itself uses components common to all instruments at the facility, providing a consistent interface. It features familiar ISAW-based 1D and 2D plotting, an OpenGL-based 3D plotter and peak fitting performed by fityk. This paper covers the benefits of integration, the flexibility of the DRA module, ease of use for the interface and audit trail generation

  15. Age Spots

    Science.gov (United States)

    ... for Every Season How to Choose the Best Skin Care Products In This Section Dermatologic Surgery What is dermatologic ... for Every Season How to Choose the Best Skin Care Products Age Spots Treatment Options Learn more about treatment ...

  16. Quambalaria species: increasing threat to eucalypt plantations in ...

    African Journals Online (AJOL)

    Spotted gum Corymbia citriodora subsp . variegata and C. maculata) is a valuable source of commercial timber and suitable for a wide range of different soil types in eastern Australia. The main biological constraint to further expansion of spottedgum plantations is Quambalaria shoot blight caused by the fungus ...

  17. 21 CFR 172.615 - Chewing gum base.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Chewing gum base. 172.615 Section 172.615 Food and..., Chewing Gum Bases and Related Substances § 172.615 Chewing gum base. The food additive chewing gum base... substances listed in paragraph (a) of this section, chewing gum base may also include substances generally...

  18. Caffeine gum minimizes sleep inertia.

    Science.gov (United States)

    Newman, Rachel A; Kamimori, Gary H; Wesensten, Nancy J; Picchioni, Dante; Balkin, Thomas J

    2013-02-01

    Naps are an effective strategy for maintaining alertness and cognitive performance; however, upon abrupt wakening from naps, sleep inertia (temporary performance degradation) may ensue. In the present study, attenuation of post-nap sleep inertia was attempted by administration of caffeine gum. Using a double-blind, placebo-controlled crossover design, 15 healthy, non-smoking adults were awakened at 1 hr. and again at 6 hr. after lights out (0100 and 0600, respectively) and were immediately administered a gum pellet containing 100 mg of caffeine or placebo. A 5-min. psychomotor vigilance task was administered at 0 min., 6 min., 12 min., and 18 min. post-awakening. At 0100, response speed with caffeine was significantly better at 12 min. and 18 min. post-awakening compared to placebo; at 0600, caffeine's effects were evident at 18 min. post-awakening. Caffeinated gum is a viable means of rapidly attenuating sleep inertia, suggesting that the adenosine receptor system is involved in sleep maintenance.

  19. Isolation and characterization of gum from Chrysophyllum albidum ...

    African Journals Online (AJOL)

    This study describes the morphology, physicochemical and compressional characteristics of a natural gum derived from the fruits of Chrysophyllum albidum. Preliminary phytochemical screening and physicochemical properties of Chrysophyllum albidum gum (in comparison with tragacanth gum) were determined while ...

  20. SPOT Program

    Science.gov (United States)

    Smith, Jason T.; Welsh, Sam J.; Farinetti, Antonio L.; Wegner, Tim; Blakeslee, James; Deboeck, Toni F.; Dyer, Daniel; Corley, Bryan M.; Ollivierre, Jarmaine; Kramer, Leonard; hide

    2010-01-01

    A Spacecraft Position Optimal Tracking (SPOT) program was developed to process Global Positioning System (GPS) data, sent via telemetry from a spacecraft, to generate accurate navigation estimates of the vehicle position and velocity (state vector) using a Kalman filter. This program uses the GPS onboard receiver measurements to sequentially calculate the vehicle state vectors and provide this information to ground flight controllers. It is the first real-time ground-based shuttle navigation application using onboard sensors. The program is compact, portable, self-contained, and can run on a variety of UNIX or Linux computers. The program has a modular objec-toriented design that supports application-specific plugins such as data corruption remediation pre-processing and remote graphics display. The Kalman filter is extensible to additional sensor types or force models. The Kalman filter design is also strong against data dropouts because it uses physical models from state and covariance propagation in the absence of data. The design of this program separates the functionalities of SPOT into six different executable processes. This allows for the individual processes to be connected in an a la carte manner, making the feature set and executable complexity of SPOT adaptable to the needs of the user. Also, these processes need not be executed on the same workstation. This allows for communications between SPOT processes executing on the same Local Area Network (LAN). Thus, SPOT can be executed in a distributed sense with the capability for a team of flight controllers to efficiently share the same trajectory information currently being computed by the program. SPOT is used in the Mission Control Center (MCC) for Space Shuttle Program (SSP) and International Space Station Program (ISSP) operations, and can also be used as a post -flight analysis tool. It is primarily used for situational awareness, and for contingency situations.

  1. Dark Spots

    Science.gov (United States)

    2006-01-01

    Dark spots (left) and 'fans' appear to scribble dusty hieroglyphics on top of the Martian south polar cap in two high-resolution Mars Global Surveyor, Mars Orbiter Camera images taken in southern spring. Each image is about 3-kilometers wide (2-miles).

  2. Fumigant Antifungal Activity of Corymbia citriodora and Cymbopogon nardus Essential Oils and Citronellal against Three Fungal Species

    Directory of Open Access Journals (Sweden)

    Raimundo Wagner de S. Aguiar

    2014-01-01

    Full Text Available Corymbia citriodora and Cymbopogon nardus essential oils samples were analyzed by GC and GC-MS and their qualitative and quantitative compositions established. The main component of essential oils of C. citriodora and C. nardus was citronellal, at 61.78% and 36.6%, respectively. The essential oils and citronellal were tested for their fumigant antifungal activity against Pyricularia (Magnaporthe grisea, Aspergillus spp., and Colletotrichum musae. The minimum inhibitory concentration (MIC ranged from 100 to 200 ppm for the essential oils and 25 to 50 mg·mL−1 for citronellal. The contact assay using the essential oils and citronellal showed growth inhibition of the three fungal species. However, a concentration of 1.47 mg·mL−1 only reduced the inhibition of Aspergillus growth to 90% at 14 days of exposure. For the fumigant assay, 0.05, 0.11, and 0.23 mg·mL−1 of essential oils and citronellal drastically affected growth of P. grisea, Aspergillus spp., and C. musae. Harmful effects on the sporulation and germination of the three fungi were seen, and there was complete inhibition at 0.15 mg·mL−1 with both oils and citronellal. This showed that the crude component of essential oils of C. citriodora and C. nardus markedly suppressed spore production, germination, and growth inhibition of P. grisea, Aspergillus spp., and Colletotrichum musae.

  3. Fumigant antifungal activity of Corymbia citriodora and Cymbopogon nardus essential oils and citronellal against three fungal species.

    Science.gov (United States)

    Aguiar, Raimundo Wagner de S; Ootani, Marcio A; Ascencio, Sérgio Donizeti; Ferreira, Talita P S; Dos Santos, Manoel M; dos Santos, Gil R

    2014-01-01

    Corymbia citriodora and Cymbopogon nardus essential oils samples were analyzed by GC and GC-MS and their qualitative and quantitative compositions established. The main component of essential oils of C. citriodora and C. nardus was citronellal, at 61.78% and 36.6%, respectively. The essential oils and citronellal were tested for their fumigant antifungal activity against Pyricularia (Magnaporthe) grisea, Aspergillus spp., and Colletotrichum musae. The minimum inhibitory concentration (MIC) ranged from 100 to 200 ppm for the essential oils and 25 to 50 mg · mL(-1) for citronellal. The contact assay using the essential oils and citronellal showed growth inhibition of the three fungal species. However, a concentration of 1.47 mg · mL(-1) only reduced the inhibition of Aspergillus growth to 90% at 14 days of exposure. For the fumigant assay, 0.05, 0.11, and 0.23 mg · mL(-1) of essential oils and citronellal drastically affected growth of P. grisea, Aspergillus spp., and C. musae. Harmful effects on the sporulation and germination of the three fungi were seen, and there was complete inhibition at 0.15 mg · mL(-1) with both oils and citronellal. This showed that the crude component of essential oils of C. citriodora and C. nardus markedly suppressed spore production, germination, and growth inhibition of P. grisea, Aspergillus spp., and Colletotrichum musae.

  4. CHARACTERIZATION AND STATISTICAL CORRELATION BETWEEN CHARCOAL’S PHYSICAL AND MECHANICAL PROPERTIES OF Eucalyptus AND Corymbia CLONES

    Directory of Open Access Journals (Sweden)

    Victor Hugo Pereira Moutinho

    2017-01-01

    Full Text Available The study aimed to analyze the physical and mechanical properties of charcoal from eucalypt clones by principal component analysis and demonstrate the relationships between these properties, in order to assess which charcoal property should aimed in the process to obtain a higher quality product. In this way, was cut eight clones of Eucalyptus and two of Corymbia , collecting three trees per clone and five disk in different heights. The disks were transformed into test samples, totaling an average of 75 samples per clones, which were carbonized under specific conditions for analysis of apparent density, compressive strength parallel to grain and linear and volumetric degradation due to high temperature. It is noteworthy that the data were weighted by disk and per tree, to an average closer to reality. For correlations, was used multivariate analysis of principal components. Herein, it is found that the apparent density of charcoal acts as the focal point of the other properties studied, and observed that as the higher the density, higher will be the compressive strength parallel to grain, the elastic modulus and the gravimetric yield.

  5. Xanthan gum production by Xanthomonas campestris pv ...

    African Journals Online (AJOL)

    Cassava starch is a main renewable bio-resource with low price and mass production in Guangxi, China. It was used as carbon source in growing Xanthomonas campestris pv. campestris 8004 (Xcc 8004) for xanthan gum production in this study. The xanthan gum yield of gelatinized cassava starch was higher than that of ...

  6. Gum chewing affects academic performance in adolescents

    Science.gov (United States)

    Chewing gum may have an impact on improved memory during specific tasks of recognition and sustained attention. Research objective was to determine the effect of gum chewing on standardized test scores and math class grades of eighth grade students. Four math classes, 108 students, were randomized i...

  7. The emulsifying Properties of Terminalia randii baker F. Gum in ...

    African Journals Online (AJOL)

    Objectives: In this study, the emulsifying properties of Terminalia randii gum were assessed and compared with a standard emulsifier (Tragacanth gum) using castor oil and liquid paraffin . Method: Different concentrations (1-10% w/v) of the mucilages of Terminalia randii gum and Tragacanth were prepared. Using wet gum ...

  8. Influence of anatomy and basic density on specific cutting force for wood from Corymbia citriodora Hill & Johnson

    Directory of Open Access Journals (Sweden)

    Luiz-E. de L. Melo

    2015-12-01

    Full Text Available Aim of the study: The aim of this study was to evaluate the influence of xylem tissue cell structure, determined through biometry and basic density of the wood from Corymbia citriodora Hill & Johnson on consumption of specific 90º-0º longitudinal cutting force.Area of study: The study area was in the region of the Vale do Rio Doce - Minas Gerais, Brazil.Material and methods: A diametrical board with dimensions of 60 x 18 x 5 cm (length x width x thickness, respectively, with more than 1.3 m from the ground, was removed. In machining trials, a 400 mm diameter circular saw was used, with 24 “WZ” teeth, feed rate of 10 m.min-1, cutting speed of 61 m.s-1, and maximum instantaneous torque of 92.5 N.m. During cutting, test specimens were removed with alternated and parallel 1.5 cm edges in 6 radial positions, which were used for biometric determination of cell structure and basic density.Main results: It was observed that wood basic density, vessel diameter, fiber wall thickness, fiber wall fraction and fiber wall portion were directly proportional to the specific cutting force. In contrast, vessel frequency and fiber lumen diameter proved to be inversely proportional to cutting force.Research highlights: This work provides important values of quantification of influence of xylem tissue cell structure, determined through biometry and physical properties of the wood that may be used to prediction of consumption of specific cutting force.Keywords: wood machining; wood properties; optimization of the process.

  9. Mongolian spots

    Directory of Open Access Journals (Sweden)

    Divya Gupta

    2013-01-01

    Full Text Available Mongolian spots (MS are birthmarks that are present at birth and their most common location is sacrococcygeal or lumbar area. Lesions may be single or multiple and usually involve < 5% total body surface area. They are macular and round, oval or irregular in shape. The color varies from blue to greenish, gray, black or a combination of any of the above. The size varies from few to more than 20 centimetres. Pigmentation is most intense at the age of one year and gradually fades thereafter. It is rarely seen after the age of 6 years. Aberrant MS over occiput, temple, mandibular area, shoulders and limbs may be confused with other dermal melanocytoses and bruises secondary to child abuse, thus necessitating documentation at birth. Although regarded as benign, recent data suggest that MS may be associated with inborn errors of metabolism and neurocristopathies. Mongolian spots usually resolve by early childhood and hence no treatment is generally needed if they are located in the sacral area. However, sometimes it may be required for extrasacral lesions for cosmesis.

  10. Design, formulation and evaluation of caffeine chewing gum.

    Science.gov (United States)

    Aslani, Abolfazl; Jalilian, Fatemeh

    2013-01-01

    Caffeine which exists in drinks such as coffee as well as in drug dosage forms in the global market is among the materials that increase alertness and decrease fatigue. Compared to other forms of caffeine, caffeine gum can create faster and more prominent effects. In this study, the main goal is to design a new formulation of caffeine gum with desirable taste and assess its physicochemical properties. Caffeine gum was prepared by softening of gum bases and then mixing with other formulation ingredients. To decrease the bitterness of caffeine, sugar, aspartame, liquid glucose, sorbitol, manitol, xylitol, and various flavors were used. Caffeine release from gum base was investigated by mechanical chewing set. Content uniformity test was also performed on the gums. The gums were evaluated in terms of organoleptic properties by the Latin-Square design at different stages. After making 22 formulations of caffeine gums, F11 from 20 mg caffeine gums and F22 from 50 mg caffeine gums were chosen as the best formulation in organoleptic properties. Both types of gum released about 90% of their own drug content after 30 min. Drug content of 20 and 50 mg caffeine gum was about 18.2-21.3 mg and 45.7-53.6 mg respectively. In this study, 20 and 50 mg caffeine gums with suitable and desirable properties (i.e., good taste and satisfactory release) were formulated. The best flavor for caffeine gum was cinnamon. Both kinds of 20 and 50 mg gums succeeded in content uniformity test.

  11. VIABILIDADE ECONÔMICA DE EXTRAÇÃO DE ÓLEO ESSENCIAL DE Corymbia citriodora EM GILBUÉS - PI

    Directory of Open Access Journals (Sweden)

    Tiago Moreira de Oliveira

    2014-09-01

    Full Text Available O objetivo do trabalho foi verificar a viabilidade econômica da implantação de uma unidade de extração de óleo essencial de Corymbia citriodora, no município de Gilbués-PI. Adotou-se como critérios de avaliação o VPL (Valor Presente Líquido, a Relação Benefício/Custo (B/C, a TIR (Taxa Interna de Retorno e o BPE (Benefício Periódico Equivalente. Simularam-se dois cenários: no primeiro foram considerados todos os critérios de avaliação econômica e no segundo avaliou-se a taxa de venda e do preço de venda do óleo, cujos critérios utilizados foram o VPL e o B(C PE. Verificou-se que a implantação de uma unidade de extração de óleo essencial de Corymbia citriodora, no município de Gilbués-PI é viável economicamente, com VPL de R$ 9.677,5/ha, TIR de 41% a. a., B/C de 1,38 e BPE de R$ 1.469,61/ha e o mesmo torna-se inviável se a taxa de juros for igual ou superior a 34,20% e se o preço de venda do litro de óleo for igual ou inferior a R$ 25,40. Palavras-chaves: Empreendimento florestal, rentabilidade, produto florestal não-madeireiro.   ECONOMIC FEASIBILITY ON ESSENCIAL OIL EXTRACTION OF Corymbia citriodora IN GILBUÉS - PI ABSTRACT The objective of this study was to simulate the economic feasibility on a unit essential oil extraction of Corymbia citriodora, in Gilbués city-PI. The criteria adopted for economic evaluating was NPV (Net Present Value, Benefit/Cost the ratio (B/C, IRR (Internal Rate of Return and BPE (Equivalent Periodic Benefit. It was simulating two scenarios: the first were all considered criteria for economic evaluation and the second  the variation in the rate of sale and the oil sale price and used criteria were the NPV and B (C PE. It was found that unit of essential oil extraction of Corymbia citriodora, in Gilbués city-PI is economically viable, with an NPV of R$ 9,677. 50/ha, 41% IRR, Benefit/Cost Ratio of 1.38 and BPE R$ 1,469.61/ha and even becomes impossible if the interest rate is

  12. Gum Producers Can Improve Quality Of Gum Marketed and Get Higher Prices

    Science.gov (United States)

    Ralph W. Clements

    1979-01-01

    Acid waste from over-treatment and old, wornout iron cups have contributed significantly to the generally poor quality of gum marketed. Today producers are reluctant to purchase new cups and gutters and invest up to $1.80 per tree for production when the market price for gum averages 14.54 per pound annually. Guidelines are given for improving the quality by...

  13. Gummed-up memory: chewing gum impairs short-term recall.

    Science.gov (United States)

    Kozlov, Michail D; Hughes, Robert W; Jones, Dylan M

    2012-01-01

    Several studies have suggested that short-term memory is generally improved by chewing gum. However, we report the first studies to show that chewing gum impairs short-term memory for both item order and item identity. Experiment 1 showed that chewing gum reduces serial recall of letter lists. Experiment 2 indicated that chewing does not simply disrupt vocal-articulatory planning required for order retention: Chewing equally impairs a matched task that required retention of list item identity. Experiment 3 demonstrated that manual tapping produces a similar pattern of impairment to that of chewing gum. These results clearly qualify the assertion that chewing gum improves short-term memory. They also pose a problem for short-term memory theories asserting that forgetting is based on domain-specific interference given that chewing does not interfere with verbal memory any more than tapping. It is suggested that tapping and chewing reduce the general capacity to process sequences.

  14. Rheological and interfacial properties at the equilibrium of almond gum tree exudate (Prunus dulcis) in comparison with gum arabic.

    Science.gov (United States)

    Mahfoudhi, Nesrine; Sessa, Mariarenata; Ferrari, Giovanna; Hamdi, Salem; Donsi, Francesco

    2016-06-01

    Almond gum contains an arabinogalactan-type polysaccharide, which plays an important role in defining its interfacial and rheological properties. In this study, rheological and interfacial properties of almond gum and gum arabic aqueous dispersions were comparatively investigated. The interfacial tension of almond gum and gum arabic aqueous dispersions was measured using the pendant drop method in hexadecane. The asymptotic interfacial tension values for almond gum were significantly lower than the corresponding values measured for gum arabic, especially at high concentration. Rheological properties were characterized by steady and oscillatory tests using a coaxial geometry. Almond gum flow curves exhibited a shear thinning non-Newtonian behavior with a tendency to a Newtonian plateau at low shear rate, while gum arabic flow curves exhibited such behavior only at high shear rate. The influence of temperature (5-50  ℃) on the flow curves was studied at 4% (m/m) gum concentration and the Newtonian viscosities at infinite and at zero shear rate, for gum arabic and almond gum, respectively, were accurately fitted by an Arrhenius-type equation. The dynamic properties of the two gum dispersions were also studied. Both gum dispersions exhibited viscoelastic properties, with the viscous component being predominant in a wider range of concentrations for almond gum, while for gum arabic the elastic component being higher than the elastic one especially at higher concentrations.The rheological and interfacial tension properties of almond gum suggest that it may represent a possible substitute of gum arabic in different food applications. © The Author(s) 2015.

  15. Optimizing gelling parameters of gellan gum for fibrocartilage tissue engineering.

    Science.gov (United States)

    Lee, Haeyeon; Fisher, Stephanie; Kallos, Michael S; Hunter, Christopher J

    2011-08-01

    Gellan gum is an attractive biomaterial for fibrocartilage tissue engineering applications because it is cell compatible, can be injected into a defect, and gels at body temperature. However, the gelling parameters of gellan gum have not yet been fully optimized. The aim of this study was to investigate the mechanics, degradation, gelling temperature, and viscosity of low acyl and low/high acyl gellan gum blends. Dynamic mechanical analysis showed that increased concentrations of low acyl gellan gum resulted in increased stiffness and the addition of high acyl gellan gum resulted in greatly decreased stiffness. Degradation studies showed that low acyl gellan gum was more stable than low/high acyl gellan gum blends. Gelling temperature studies showed that increased concentrations of low acyl gellan gum and CaCl₂ increased gelling temperature and low acyl gellan gum concentrations below 2% (w/v) would be most suitable for cell encapsulation. Gellan gum blends were generally found to have a higher gelling temperature than low acyl gellan gum. Viscosity studies showed that increased concentrations of low acyl gellan gum increased viscosity. Our results suggest that 2% (w/v) low acyl gellan gum would have the most appropriate mechanics, degradation, and gelling temperature for use in fibrocartilage tissue engineering applications. Copyright © 2011 Wiley Periodicals, Inc.

  16. Design, formulation and evaluation of nicotine chewing gum

    Directory of Open Access Journals (Sweden)

    Abolfazl Aslani

    2012-01-01

    Conclusion: Taste enhancement of nicotine gums was achieved where formulations comprised aspartame as the sweetener and cherry and eucalyptus as the flavoring agents. Nicotine gums of pleasant taste may, therefore, be used as NRT to assist smokers quit smoking.

  17. Natural gums and modified natural gums as sustained-release carriers.

    Science.gov (United States)

    Bhardwaj, T R; Kanwar, M; Lal, R; Gupta, A

    2000-10-01

    Although natural gums and their derivatives are used widely in pharmaceutical dosage forms, their use as biodegradable polymeric materials to deliver bioactive agents has been hampered by the synthetic materials. These natural polysaccharides do hold advantages over the synthetic polymers, generally because they are nontoxic, less expensive, and freely available. Natural gums can also be modified to have tailor-made materials for drug delivery systems and thus can compete with the synthetic biodegradable excipients available in the market. In this review, recent developments in the area of natural gums and their derivatives as carriers in the sustained release of drugs are explored.

  18. Rheological Modeling and Characterization of Ficus platyphylla Gum Exudates

    Directory of Open Access Journals (Sweden)

    Nnabuk O. Eddy

    2013-01-01

    Full Text Available Ficus platyphylla gum exudates (FP gum have been analyzed for their physicochemical parameters and found to be ionic, mildly acidic, odourless, and yellowish brown in colour. The gum is soluble in water, sparingly soluble in ethanol, and insoluble in acetone and chloroform. The nitrogen (0.39% and protein (2.44% contents of the gum are relatively low. The concentrations of the cations were found to increase according to the following trend, Mn>Fe>Zn>Pb>Cu>Mg>Cd>Ca. Analysis of the FTIR spectrum of the gum revealed vibrations similar to those found in polysaccharides while the scanning electron micrograph indicated that the gum has irregular molecular shapes, arranged randomly. The intrinsic viscosity of FP gum estimated by extrapolating to zero concentrations in Huggins, Kraemer, Schulz-Blaschke, and Martin plots has an average value of 7 dL/g. From the plots of viscosity versus shear rate/speed of rotation and also that of shear stress versus shear rate, FP gum can be classified as a non-Newtonian gum with characteristics-plastic properties. Development of the Master_s curve for FP gum also indicated that the gum prefers to remain in a dilute domain (Cgum (calculated from Arrhenius-Frenkel-Eyring plot was relatively low and indicated the presence of fewer inter- and intramolecular interactions.

  19. Quantification and Qualification of Bacteria Trapped in Chewed Gum

    NARCIS (Netherlands)

    Wessel, Stefan W.; van der Mei, Henny C.; Morando, David; Slomp, Anje M.; van de Belt-Gritter, Betsy; Maitra, Amarnath; Busscher, Henk J.

    2015-01-01

    Chewing of gum contributes to the maintenance of oral health. Many oral diseases, including caries and periodontal disease, are caused by bacteria. However, it is unknown whether chewing of gum can remove bacteria from the oral cavity. Here, we hypothesize that chewing of gum can trap bacteria and

  20. Evaluation of the suspending properties of Cola acuminata gum on ...

    African Journals Online (AJOL)

    Many natural gums are employed as suspending agents in the formulation of pharmaceutical suspensions. The search to develop locally available natural gum from apparently a waste product as an alternative suspending agent stimulated the interest in this present study. Cola acuminata gum (CAG) extracted from Cola ...

  1. Design, formulation and evaluation of caffeine chewing gum

    Directory of Open Access Journals (Sweden)

    Abolfazl Aslani

    2013-01-01

    Conclusion: In this study, 20 and 50 mg caffeine gums with suitable and desirable properties (i.e., good taste and satisfactory release were formulated. The best flavor for caffeine gum was cinnamon. Both kinds of 20 and 50 mg gums succeeded in content uniformity test.

  2. Evaluation of the suspending properties of Adansonia digitata gum ...

    African Journals Online (AJOL)

    Sedimentation volume and rate, rheology, and ease of redispersion were employed as evaluation parameters. The results showed that both hot and cold water extracts of the gum used at 2-3 % w/v produced a better suspending property than 4 % w/v Compound Tragacanth gum. The suspending ability of the gums was in ...

  3. Granule properties of paracetamol made with Bombax ceiba gum ...

    African Journals Online (AJOL)

    Bombax ceiba gum was extracted from the calyx of the Bombax flower using both hot and cold water extraction method. The gum was used as binder to prepare paracetamol granules in concentrations of 1, 1.5, 2, and 3 %. Acacia gum was used to prepare the standard at the same concentrations. The granule properties of ...

  4. Demonstrating close-packing of atoms using spherical bubble gums ...

    African Journals Online (AJOL)

    In this paper, the use of spherical bubble gums (Gum Balls) to demonstrate the close-packing of atoms and ions is presented. Spherical bubble gums having distinctive colours were used to illustrate the different layers in variety of crystalline packing and the formation of tetrahedral and octahedral holes. Students with ...

  5. demonstrating close-packing of atoms using spherical bubble gums

    African Journals Online (AJOL)

    Admin

    ABSTRACT: In this paper, the use of spherical bubble gums (Gum Balls) to demonstrate the close-packing of atoms and ions is presented. Spherical bubble gums having distinctive colours were used to illustrate the different layers in variety of crystalline packing and the formation of tetrahedral and octahedral holes.

  6. Dependence on the nicotine gum in former smokers.

    Science.gov (United States)

    Etter, Jean-François

    2009-03-01

    We conducted an Internet survey in 2004-2007 in 526 daily users of the nicotine gum, to assess use of, and dependence on the nicotine gum in former smokers. We used modified versions of the Nicotine Dependence Syndrome Scale (NDSS-G), the Cigarette Dependence Scale (CDS-G) and the Fagerström Test (FTND-G). After 30 days, 155 participants (29%) indicated their gum use. Higher dependence on the gum predicted a lower chance of stopping using it at follow-up (odds ratio=0.36 for each standard deviation unit on CDS-G, p=0.001). More long-term (>3 months) than short-term (dependence on the gum than short-term users, as assessed with NDSS-Gum, CDS-Gum and FTND-Gum (all pdependence on the nicotine gum. Lower levels of dependence on the gum predicted cessation of gum use. However, long term use of the nicotine gum has no known serious adverse consequence, and may be beneficial if it prevents late relapse.

  7. Enzymatic production of polysaccharides from gum tragacanth

    DEFF Research Database (Denmark)

    2014-01-01

    Plant polysaccharides, relating to the field of natural probiotic components, can comprise structures similar to human milk oligosaccharides. A method for enzymatic hydrolysis of gum tragacanth from the bush-like legumes of the genus Astragalus, using a combination of pectin hydrolases and a xylo......Plant polysaccharides, relating to the field of natural probiotic components, can comprise structures similar to human milk oligosaccharides. A method for enzymatic hydrolysis of gum tragacanth from the bush-like legumes of the genus Astragalus, using a combination of pectin hydrolases...

  8. Waterflooding process using mucilage gum thickeners

    Energy Technology Data Exchange (ETDEWEB)

    Lummus, J.L.

    1967-08-29

    According to the described process, the viscosity of water in a water drive can be increased with a mucilage gum derived from flax meal. This substance has less tendency to be absorbed on clay surfaces than some high molecular weight polymers that have been studied. The water-extracted flax gum can be deactivated with clay to remove the absorbable fraction and the residual solution be used for the ''pusher flood.'' This is said to avoid decreasing permeability around the well bore and keep the solution in contact with the oil at essentially the same viscosity as the injected fluid. (7 claims)

  9. Flavor release measurement from gum model system

    DEFF Research Database (Denmark)

    Ovejero-López, I.; Haahr, Anne-Mette; van den Berg, Frans W.J.

    2004-01-01

    Flavor release from a mint-flavored chewing gum model system was measured by atmospheric pressure chemical ionization mass spectroscopy (APCI-MS) and sensory time-intensity (TI). A data analysis method for handling the individual curves from both methods is presented. The APCI-MS data are ratio...... composition can be measured by both instrumental and sensory techniques, providing comparable information. The peppermint oil level (0.5-2% w/w) in the gum influenced both the retronasal concentration and the perceived peppermint flavor. The sweeteners' (sorbitol or xylitol) effect is less apparent. Sensory...

  10. Evaluation of mechanical properties of unsaturated polyester-guar gum/hydroxypropyl guar gum composites

    Directory of Open Access Journals (Sweden)

    2007-09-01

    Full Text Available Guar gum is a natural polysaccharide that has been explored for various applications. However, there is a limited number of studies in which guar gum has been used as a filler in a polymer. The effect of guar gum and its hydroxypropyl derivatives in unsaturated polyester composites were investigated with respect to their mechanical and chemical properties. The effect of hydroxypropylation and the degree of hydroxypropylation on the properties of resultant composites were also studied. It was observed that the inclusion of guar gum and its derivatives resulted in composites with increased solvent resistance and mechanical properties. An increase in the degree of substitution resulted in increased polymer-filler interaction reflected by a positive effect on the mechanical properties of the composites. These results open an avenue for the use of polysaccharides and their derivatives as eco-friendly fillers as a replacement of mineral fillers.

  11. PHYSICOCHEMICAL AND gabonensis GUM EXUDATES A ...

    African Journals Online (AJOL)

    userpc

    surfaces as revealed by streaming potential measurements, atomic force microscopy, molecular dynamics simulations and contact angle measurements." 77-80. Nep, E. I and Conway, B. R.. (2010).Characterization of Grewia gum, a potential pharmaceutical excipient. Journal of Excipient and Food Chemistry 1(1): 30-. 40.

  12. Mind Your Mouth: Preventing Gum Disease

    Science.gov (United States)

    ... gum disease. Smoking greatly increases your risk for periodontitis—another reason not to smoke. Other factors that boost your risk include hormonal changes in women, certain medications and some illnesses like diabetes, cancer and AIDS. NIH-supported researchers are working ...

  13. 21 CFR 582.3336 - Gum guaiac.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Gum guaiac. 582.3336 Section 582.3336 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives § 582.3336...

  14. 21 CFR 172.665 - Gellan gum.

    Science.gov (United States)

    2010-04-01

    ... molecular weight polysaccharide gum produced from Pseudomonas elodea by a pure culture fermentation process... (glyceryl and acetyl) groups as the O-glycosidically linked esters. (b) The strain of P. elodea is... viable cells of P. elodea. (d) The additive meets the following specifications: (1) Positive for gellan...

  15. 21 CFR 172.695 - Xanthan gum.

    Science.gov (United States)

    2010-04-01

    ... hexose units and is manufactured as the sodium, potassium, or calcium salt. (b) The strain of Xanthomonas... hours for cooling. Examine the cooled beaker contents for a firm rubbery gel formation after the... bean gum). Allow the solution to cool without agitation as before. Formation of a gel on cooling...

  16. gum production by Xanthomonas campestris pv

    African Journals Online (AJOL)

    DR TONUKARI NYEROVWO

    2012-09-11

    Sep 11, 2012 ... Fermentation curve of total sugar and xanthan gum production. living cells, as colony counting method can reflect the counts of living bacteria. The gelatinized cassava starch was viscous at the beginning of the fermentation; the fermentation broth was not well mixed, so the concentration of total sugar was.

  17. Tuliposides and tulipalins in tulip Gum

    NARCIS (Netherlands)

    Lubbe, A.; Verpoorte, R.; Gude, H.; Dijkema, M.H.G.E.

    2013-01-01

    Gummosis in tulip bulbs is one of the negative effects of ethylene gas that is produced during storage by Fusarium-infected bulbs on the healthy bulbs. Several aspects of the gummosis process, like the factors inducing it, the underlying carbohydrate metabolism and the composition of the gum have

  18. The effect of chewing gum on dental plaque accumulation

    Directory of Open Access Journals (Sweden)

    Karami Nogourani M

    2010-06-01

    Full Text Available "nBackground and Aims: Studies show that sucrose containing chewing gums are cariogenic. The aim of this study was to evaluate the effect of two commercial chewing gums with and without sucrose on dental plaque accumulation compared with the control group. "nMaterials and Methods: In this clinical study, plaque accumulation during three 7-day periods (with two weeks interval was recorded (Sillness & Loe Index in a group of 23 volunteer male dental students who chewed in the first two periods sugar-free or sugar-containing chewing gums (Olips and Orbit, respectively and in the last period did not chew any gum. Participants were asked to chew daily five gum sticks after meals for about twenty minutes. The data were statistically analyzed using Repeated Measure ANOVA and paired-T test. "nResults: The results showed that chewing any gum even sucrose-containing gum decreased the level of dental plaque accumulation (P<0.001. However, the decreasing effect of sugar-free gums was significantly higher (P<0.001. "nConclusion: Although sugar free gum was more effective than sugar containing gum on reducing dental plaque accumulation, chewing even sugar containing gums could decrease the level of dental plaque.

  19. Flavour-enhanced cortisol release during gum chewing.

    Directory of Open Access Journals (Sweden)

    Yoko Hasegawa

    Full Text Available There is some evidence to suggest that chewing gum reduces chronic stress. However, it remains controversial how the taste and odour properties of chewing gum influence stress. The present study was designed to investigate this issue in human subjects. Using an enzyme-linked immunosorbent assay, we tested salivary cortisol concentration, which is thought to be a stress marker, in 96 adults who chewed gum with different combinations of taste and odour. Subjects could discriminate between the types of gum without prior information. Salivary cortisol concentrations were highest and lowest for the subjects who chewed the most flavourful gum and the least flavourful gum, respectively. These findings suggest that the salivary cortisol level during gum chewing is not a marker of negative emotions (i.e., stressful conditions as traditionally considered but, rather, an index of positive emotions that can facilitate biological responses to overcome stressful conditions.

  20. SpotADAPT

    DEFF Research Database (Denmark)

    Kaulakiene, Dalia; Thomsen, Christian; Pedersen, Torben Bach

    2015-01-01

    by Amazon Web Services (AWS). The users aiming for the spot market are presented with many instance types placed in multiple datacenters in the world, and thus it is difficult to choose the optimal deployment. In this paper, we propose the framework SpotADAPT (Spot-Aware (re-)Deployment of Analytical...... execution within boundaries). Moreover, during the execution of the workload, SpotADAPT suggests a redeployment if the current spot instance gets terminated by Amazon or a better deployment becomes possible due to fluctuations of the spot prices. The approach is evaluated using the actual execution times...

  1. Intrinsic viscosity of binary gum mixtures with xanthan gum and guar gum: Effect of NaCl, sucrose, and pH.

    Science.gov (United States)

    Bak, J H; Yoo, B

    2017-12-29

    The intrinsic viscosity ([η]) values of binary gum mixtures with xanthan gum (XG) and guar gum (GG) mixed with NaCl and sucrose at different concentrations as well as in the presence of different pH levels were examined in dilute solution as a function of XG/GG mixing ratio (100/0, 75/25, 50/50, and 0/100). Experimental values of concentration (C) and relative viscosity (η rel ) or specific viscosity (η sp ) of gums in dilute solution were fitted to five models to determine [η] values of binary gum mixtures including individual gums. A [η] model (η rel =1+[η]C) of Tanglertpaibul and Rao is recommended as the best model to estimate [η] values for the binary gum mixtures with XG and GG as affected by NaCl, sucrose, and pH. Overall, the synergistic interaction of XG-GG mixtures in the presence of NaCl and sucrose showed a greatly positive variation between measured and calculated values of [η]. In contrast, the binary gum mixtures showed synergy only under an acidic condition (pH3). These results suggest that the NaCl and sucrose addition or acidic condition appears to affect the intermolecular interaction occurred between XG and GG at different gum mixing ratios. Copyright © 2018 Elsevier B.V. All rights reserved.

  2. Physico-chemical study on guar gum

    International Nuclear Information System (INIS)

    Mahmoud, Nahla Mubarak

    2000-05-01

    Guar plant is an annual summer plant and it can resist diseases, pests and drought. Guar gum is used in a lot of industries. The present study deals with some physical properties of two commercial grade samples of guar gum cyamopsis tetragonoloba which where produced in 1996 and 1997 seasons (S 1 and S 2 respectively). Our analytical data are compared with those of previous workers in this area and international quality. Guar gum (S 2 ) is separated into water-insoluble components. Three fractions were obtained from the water-soluble components by fractional participation using acetone. Guar gum powder is yellowish white; the water-insoluble component is brownish white. Comparison study between gum samples (S 1 and S 2 ) and water-insoluble fraction (1) and water-soluble fractions are close to each other in their physico-properties. chemical All samples and fractions contain galactomannan polysaccharide as explained by infra-red spectra.Moisture contents for the gum samples were 5.2% and 7.8% and that for the water-insoluble fraction 4.7% while that for fraction samples were 5.2%-7.5% ash contents for the gum samples was 0.81% and 1.14% and for the water-insoluble component 0.88% while the contents in the fractions between 0.5%-0.66%. Nitrogen content determination showed that the gum samples had value of 0.678% and 0.732% and water -insoluble fraction had a value of 0.118%. The values decreased in the water-soluble fractions giving 0.049%, 0.053 and 0.056%. Water-soluble component and its fractions record the following results: pH measurements showed that the water-soluble component had pH 6.70 and 6.84 while its fractions had pH 5.90 and 7.00. Viscosity measurements showed that water-soluble fractions had intrinsic viscosity of 6.4 and 6.8 dL. g -1 . The fractions derived from water-soluble fraction had intrinsic viscosity of 6.6, 7 and 7.5 dl. g -1 . Using Mark-Howink equation, calculated average molecular weights for the water-soluble components were 7.01x10 5

  3. Competition in the gum arabic market: a game theoretic modelling approach

    NARCIS (Netherlands)

    Rahim, A.; Ierland, van E.C.; Weikard, H.P.

    2010-01-01

    Gum arabic is mainly produced from two Acacias that are found in the gum belt of Sub-Saharan Africa. These are Acacia senegal that produces high quality gum and Acacia seyal that produces low quality gum. In recent years the gum market structure has changed and Sudan lost its near monopoly position

  4. Controle de Botryosphaeria ribis causador de seca de ponteiro em Corymbia citriodora, com extratos vegetais e fungicidas

    Directory of Open Access Journals (Sweden)

    Adimara Bentivoglio Colturato

    2011-09-01

    convencional e quatro produtos para o controle (extrato de melão de são caetano, extrato de Corymbia citriodora, álcool e água. A inoculação do patógeno foi feita no caule das mudas. Foram feitas aplicações dos produtos e avaliações semanais. A avaliação foi feita através da contagem de plantas doentes. O ingrediente ativo carbendazin foi o que mostrou os melhores resultados "in vitro" diferindo estatísticamente dos outros tratamentos pelo teste Tukey a 1% de probabilidade; seguido pelo clorotalonil e difenoconazole. Todos os ingredientes ativos avaliados mostraram-se superiores a testemunha. A campo, azoxystrobin foi superior aos demais tratamentos e não houve diferença significativa entre os métodos de aplicação. "In vitro", os extratos de mil folhas, melão e eucalipto não diferiram entre si pelo teste de Tukey a 5% de probabilidade. O álcool proporcionou a maior inibição do crescimento micelial e diferiu estatisticamente dos outros tratamentos utilizados. As concentrações de 10, 15 e 20% dos extratos não diferiram entre si, mas foram superiores a concentração de 5%. No teste em mudas, a aplicação preventiva mostrou-se superior a aplicação curativa, sendo que o álcool e o extrato de C. citriodora não diferiram entre si, mas foram superiores ao extrato de melão-de-são-caetano. Todos os produtos foram superiores a testemunha.

  5. Gum Arabic authentication and mixture quantification by near infrared spectroscopy

    DEFF Research Database (Denmark)

    Dong, Yongjiang; Sørensen, Klavs Martin; He, Sailing

    2017-01-01

    A rapid and reliable method is developed for Gum Arabic authentication based on Near Infrared (NIR) spectroscopy and chemometric methods. On a large industrial collection of authentic gum Arabics, the two major Acacia gum species, Acacia senegal and Acacia seyal could be assigned perfectly...... by the NIR spectroscopic method. In addition, a partial least squares (PLS) regression model is calibrated to predict the blending percentage of the two pure gum types, producing an accuracy, root mean square error of cross validation (RMSECV) of 2.8%. Sampling of the Gum Arabic ‘tears’ is discussed......, and it was determined that subsamples from three ‘tears’ is required for a representative result. It is concluded that NIR spectroscopy is a very powerful and reliable method for authenticity testing of Gum Arabic species....

  6. Antiectoparasitic activity of the gum resin, gum haggar, from the East African plant, Commiphora holtziana.

    Science.gov (United States)

    Birkett, Michael A; Abassi, Sate Al; Kröber, Thomas; Chamberlain, Keith; Hooper, Antony M; Guerin, Patrick M; Pettersson, Jan; Pickett, John A; Slade, Robin; Wadhams, Lester J

    2008-05-01

    The mechanism of ixodid tick (Acari: Ixodidae) repellency by gum haggar, a resin produced by Commiphora holtziana (Burseraceae), was investigated by evaluating activity against the cattle tick, Boophilus microplus. In an arena bioassay, a hexane extract of the resin of C. holtziana exhibited a repellent effect lasting up to 5h. The hydrocarbon fraction of the resin extract was shown to account for the repellent activity, and was analysed by coupled gas chromatography-mass spectrometry (GC-MS). Major sesquiterpene hydrocarbons were tentatively identified as germacrene-D, delta-elemene and beta-bourbonene. The identity and stereochemistry of the former compound was confirmed as the (+)-isomer by peak enhancement using enantioselective GC, whereas the latter 2 compounds, which are most likely degradation products of germacrene-type precursors, were identified through isolation by preparative gas chromatography followed by microprobe-NMR spectroscopy. GC comparison of gum haggar with another resin, C. myrrha, which was inactive in the tick bioassay, showed that the latter contained much lower levels of these hydrocarbons. To assess the suitability of the gum haggar resin as a general acarine repellent, further tests were made on a major acarine pest of European and US animal husbandry systems, the red poultry mite, Dermanyssus gallinae (Acari: Dermanyssidae). Gum haggar extract, and the isolated hydrocarbon fraction, showed strong repellent effects in an olfactometer assay, and again gum myrrh showed no effect. These findings provide a scientific basis for the observed anti-tick properties of gum haggar, and demonstrate the potential for its development as a general acarine repellent for use in animal husbandry systems.

  7. Quantification and qualification of bacteria trapped in chewed gum.

    Directory of Open Access Journals (Sweden)

    Stefan W Wessel

    Full Text Available Chewing of gum contributes to the maintenance of oral health. Many oral diseases, including caries and periodontal disease, are caused by bacteria. However, it is unknown whether chewing of gum can remove bacteria from the oral cavity. Here, we hypothesize that chewing of gum can trap bacteria and remove them from the oral cavity. To test this hypothesis, we developed two methods to quantify numbers of bacteria trapped in chewed gum. In the first method, known numbers of bacteria were finger-chewed into gum and chewed gums were molded to standard dimensions, sonicated and plated to determine numbers of colony-forming-units incorporated, yielding calibration curves of colony-forming-units retrieved versus finger-chewed in. In a second method, calibration curves were created by finger-chewing known numbers of bacteria into gum and subsequently dissolving the gum in a mixture of chloroform and tris-ethylenediaminetetraacetic-acid (TE-buffer. The TE-buffer was analyzed using quantitative Polymerase-Chain-Reaction (qPCR, yielding calibration curves of total numbers of bacteria versus finger-chewed in. Next, five volunteers were requested to chew gum up to 10 min after which numbers of colony-forming-units and total numbers of bacteria trapped in chewed gum were determined using the above methods. The qPCR method, involving both dead and live bacteria yielded higher numbers of retrieved bacteria than plating, involving only viable bacteria. Numbers of trapped bacteria were maximal during initial chewing after which a slow decrease over time up to 10 min was observed. Around 10(8 bacteria were detected per gum piece depending on the method and gum considered. The number of species trapped in chewed gum increased with chewing time. Trapped bacteria were clearly visualized in chewed gum using scanning-electron-microscopy. Summarizing, using novel methods to quantify and qualify oral bacteria trapped in chewed gum, the hypothesis is confirmed that chewing

  8. Phytase application in chewing gum - A technical assessment

    DEFF Research Database (Denmark)

    Nielsen, Anne Veller Friis; Meyer, Anne S.

    2016-01-01

    either prior to ingestion, i.e. in the food, or post ingestion, i.e. in the human gastrointestinal tract. We have assessed the technical aspects of formulation and release of phytase added to chewing gum as a delivery vehicle. Phytases from Aspergillus niger and Escherichia coli incorporated into chewing...... gum were released quantitatively upon chewing and retained phytase activity (50-80% of the enzyme activity added was released within 10 minutes). Initial evaluations of phytase chewing gum shelf life showed good stability after 48 days of storage of the chewing gum at ambient conditions....

  9. Stabilization of emulsions by gum tragacanth (Astragalus spp.) correlates to the galacturonic acid content and methoxylation degree of the gum

    DEFF Research Database (Denmark)

    Ahmadi Gavlighi, Hassan; Meyer, Anne S.; Abang Zaidel, Dayang Norulfairuz

    2013-01-01

    -soluble (tragacanthin) and water-swellable (bassorin) fractions, their monosaccharide composition, methoxylation, and acetylation degrees. The gums from A. parrowianus and A. fluccosus had relatively high tragacanthin:bassorin ratios of ∼66:34 and ∼75:25, respectively, whereas in the other gums this ratio approached 50......–270 mg/g), and galactose (∼40–140 mg/g), and also contained fucose, rhamnose, and glucose. The ability of the gums to act as stabilizers in whey protein isolate based emulsions varied. The best emulsion stabilization effect, measured as lowest creaming index ratio after 20 days, was obtained with the A....... fluccosus gum. The emulsion stabilization effect correlated linearly and positively to the methoxylation degree, and galacturonic acid content of the gums, but not to acetyl or fucose content. A particularly high correlation was found between methoxyl level in the soluble gum part and emulsion stabilization...

  10. Nematodes from galls on Myrtaceae. IV. Fergusobia from flat leaf galls on Eucalyptus and Corymbia, with descriptions of two new species.

    Science.gov (United States)

    Davies, Kerrie A; Giblin-Davis, Robin M; Ye, Weimin; Taylor, Gary S; Thomas, W Kelley

    2013-11-26

    Two new species of Fergusobia are described. Both were collected from flat leaf galls from South Australia, one on Eucalyptus microcarpa and the other on E. porosa. Fergusobia microcarpae n. sp. Davies is characterised by the combination of a C-shaped parthenogenetic female with a short, broadly rounded conoid tail, an arcuate to open C-shaped infective female with an hemispherical tail tip, and arcuate to J-shaped males with angular spicules and short peloderan bursa. Fergusobia porosae n. sp. Davies is similar in having an arcuate to C-shaped parthenogenetic female with a small conoid tail, an almost straight to arcuate infective female with an hemispherical tail tip, and males that are almost straight to barely J-shaped with angular spicules and short peloderan bursa. They differ in that the bodies of parthenogenetic and infective females of F. microcarpae n. sp. are more curved than in F. porosae n. sp. Other known similar forms of Fergusobia/Fergusonina galls are outlined and the larval shield morphologies of their associated mutualistic Fergusonina fly species are discussed where known. An inventory of all known Fergusobia/Fergusonina associations from flat leaf galls from Corymbia spp. and Eucalyptus spp. is presented. Relationships of Fergusobia nematodes were inferred from analysis of sequences of 28S rDNA D2/D3 domains and a portion of mitochondrial DNA cytochrome oxidase subunit I (mtCOI). Nematodes from flat leaf galls appeared in two clades. 

  11. Anti-staphylococcal activity of C-methyl flavanones from propolis of Australian stingless bees (Tetragonula carbonaria) and fruit resins of Corymbia torelliana (Myrtaceae).

    Science.gov (United States)

    Massaro, C F; Katouli, M; Grkovic, T; Vu, H; Quinn, R J; Heard, T A; Carvalho, C; Manley-Harris, M; Wallace, H M; Brooks, P

    2014-06-01

    Propolis of Australian stingless bees (Tetragonula carbonaria, Meliponini) originating from Corymbia torelliana (Myrtaceae) fruit resins was tested for its antimicrobial activities as well as its flavonoid contents. This study aimed at the isolation, structural elucidation and antibacterial testing of flavanones of C. torelliana fruit resins that are incorporated into stingless bee propolis. Flavanones of this study were elucidated by spectroscopic and spectrometric methods including UV, 1D and 2D NMR, EI-MS, ESI-MS and HR-MS. The results indicated known C-methylated flavanones namely, 1 (2S)-cryptostrobin, its regioisomer 2 (2S)- stroboponin, 3 (2S)- cryptostrobin 7-methyl ether, and 6 (2S)- desmethoxymatteucinol, and known flavanones 4 (2S)- pinostrobin and 5 (2S)- pinocembrin as markers for C. torelliana fruit resins and one propolis type. Ethanolic preparations of propolis were shown to be active against Staphylococcus aureus (ATCC 25923) and to a lesser extent against Pseudomonas aeruginosa (ATCC 27853). C. torelliana flavanones inhibited the growth of S. aureus therefore contributing to the antibacterial effects observed for Australian stingless bee propolis extracts. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. Antimicrobial and antioxidant activities and phenolic profile of Eucalyptus globulus Labill. and Corymbia ficifolia (F. Muell.) K.D. Hill & L.A.S. Johnson leaves.

    Science.gov (United States)

    Dezsi, Ștefan; Bădărău, Alexandru Sabin; Bischin, Cristina; Vodnar, Dan Cristian; Silaghi-Dumitrescu, Radu; Gheldiu, Ana-Maria; Mocan, Andrei; Vlase, Laurian

    2015-03-16

    This study was performed to evaluate the in vitro antimicrobial and antioxidant activities and the phenolic profile of Eucalytus globulus Labill. and Corymbia ficifolia (F. Muell.) K.D. Hill & L.A.S. Johnson leaves. Both leave extracts contain significant amounts of phenolic compounds, mainly flavonoids. Qualitative and quantitative analyses of the phenolic compounds were performed using a HPLC/MS method. The main flavonoid was hyperoside and its highest amount was found in E. globulus (666.42 ± 5.02 μg/g dw plant material). Regarding the flavonol profile, myricetin was the dominant compound and its highest amount was found in C. ficifolia leaves (124.46 ± 0.24 μg/g dw plant material). The antioxidant activity was evaluated by DPPH, TEAC, hemoglobin ascorbate peroxidase activity inhibition (HAPX) and inhibition of lipid peroxidation catalyzed by cytochrome c assays, revealing an important antioxidant potential for both species. In the antimicrobial assays, C. ficifolia extract was found to be more active than E. globulus against both Gram-positive and Gram-negative bacterial strains with the exception of Bacillus subtilis. The results of the present study provide new valuable data regarding the bioactivities of these medicinal species.

  13. Antimicrobial and Antioxidant Activities and Phenolic Profile of Eucalyptus globulus Labill. and Corymbia ficifolia (F. Muell. K.D. Hill & L.A.S. Johnson Leaves

    Directory of Open Access Journals (Sweden)

    Ștefan Dezsi

    2015-03-01

    Full Text Available This study was performed to evaluate the in vitro antimicrobial and antioxidant activities and the phenolic profile of Eucalytus globulus Labill. and Corymbia ficifolia (F. Muell. K.D. Hill & L.A.S. Johnson leaves. Both leave extracts contain significant amounts of phenolic compounds, mainly flavonoids. Qualitative and quantitative analyses of the phenolic compounds were performed using a HPLC/MS method. The main flavonoid was hyperoside and its highest amount was found in E. globulus (666.42 ± 5.02 μg/g dw plant material. Regarding the flavonol profile, myricetin was the dominant compound and its highest amount was found in C. ficifolia leaves (124.46 ± 0.24 μg/g dw plant material. The antioxidant activity was evaluated by DPPH, TEAC, hemoglobin ascorbate peroxidase activity inhibition (HAPX and inhibition of lipid peroxidation catalyzed by cytochrome c assays, revealing an important antioxidant potential for both species. In the antimicrobial assays, C. ficifolia extract was found to be more active than E. globulus against both Gram-positive and Gram-negative bacterial strains with the exception of Bacillus subtilis. The results of the present study provide new valuable data regarding the bioactivities of these medicinal species.

  14. Do Hybrid Trees Inherit Invasive Characteristics? Fruits of Corymbia torelliana X C. citriodora Hybrids and Potential for Seed Dispersal by Bees.

    Science.gov (United States)

    Wallace, Helen Margaret; Leonhardt, Sara Diana

    2015-01-01

    Tree invasions have substantial impacts on biodiversity and ecosystem functioning, and trees that are dispersed by animals are more likely to become invasive. In addition, hybridisation between plants is well documented as a source of new weeds, as hybrids gain new characteristics that allow them to become invasive. Corymbia torelliana is an invasive tree with an unusual animal dispersal mechanism: seed dispersal by stingless bees, that hybridizes readily with other species. We examined hybrids between C. torelliana and C. citriodora subsp. citriodora to determine whether hybrids have inherited the seed dispersal characteristics of C. torelliana that allow bee dispersal. Some hybrid fruits displayed the characteristic hollowness, resin production and resin chemistry associated with seed dispersal by bees. However, we did not observe bees foraging on any hybrid fruits until they had been damaged. We conclude that C. torelliana and C. citriodora subsp. citriodora hybrids can inherit some fruit characters that are associated with dispersal by bees, but we did not find a hybrid with the complete set of characters that would enable bee dispersal. However, around 20,000 hybrids have been planted in Australia, and ongoing monitoring is necessary to identify any hybrids that may become invasive.

  15. Mini-incubators improve the adventitious rooting performance of Corymbia and Eucalyptus microcuttings according to the environment in which they are conditioned

    Directory of Open Access Journals (Sweden)

    GILVANO E. BRONDANI

    2017-10-01

    Full Text Available ABSTRACT We addressed a major challenge in the in vitro clonal propagation of Corymbia citriodora, Eucalyptus urophylla and E. benthamii by using an ex vitro adventitious rooting strategy in a mini-incubator. Mini-incubators were placed in four environments for rooting. A shade house with no fogging system and a greenhouse with no ventilation but with a fogging environment had the best performance in terms of rooting, root growth and survival of microcuttings. Daily recording of the temperature within each mini-incubator in each environment allowed the verification of negative correlations between the maximum average temperature and the survival, adventitious rooting and root growth. The ideal maximum air temperature for the efficient production of clonal plants was 28.4°C (± 5.5°C, and the minimum was 20.3°C (± 6.2°C. E. benthamii was more sensitive to higher temperatures than C. citriodora and E. urophylla. Nevertheless, placing mini-incubators in the shade house with no fogging system resulted in a stable and uniform performance among the three species, with 100.0% survival and 81.4% rooting. Histological sections of the adventitious roots revealed connection with the stem vascular cambium. Therefore, our experimental system demonstrated the potential of mini-incubators coupled with the proper environment to optimize the adventitious rooting performance of microcuttings.

  16. Mini-incubators improve the adventitious rooting performance of Corymbia and Eucalyptus microcuttings according to the environment in which they are conditioned.

    Science.gov (United States)

    Brondani, Gilvano E; Oliveira, Leandro S DE; Konzen, Enéas R; Silva, André L L DA; Costa, Jefferson L

    2017-10-16

    We addressed a major challenge in the in vitro clonal propagation of Corymbia citriodora, Eucalyptus urophylla and E. benthamii by using an ex vitro adventitious rooting strategy in a mini-incubator. Mini-incubators were placed in four environments for rooting. A shade house with no fogging system and a greenhouse with no ventilation but with a fogging environment had the best performance in terms of rooting, root growth and survival of microcuttings. Daily recording of the temperature within each mini-incubator in each environment allowed the verification of negative correlations between the maximum average temperature and the survival, adventitious rooting and root growth. The ideal maximum air temperature for the efficient production of clonal plants was 28.4°C (± 5.5°C), and the minimum was 20.3°C (± 6.2°C). E. benthamii was more sensitive to higher temperatures than C. citriodora and E. urophylla. Nevertheless, placing mini-incubators in the shade house with no fogging system resulted in a stable and uniform performance among the three species, with 100.0% survival and 81.4% rooting. Histological sections of the adventitious roots revealed connection with the stem vascular cambium. Therefore, our experimental system demonstrated the potential of mini-incubators coupled with the proper environment to optimize the adventitious rooting performance of microcuttings.

  17. Formulation development and evaluation of metformin chewing gum with bitter taste masking

    Directory of Open Access Journals (Sweden)

    Sayed Abolfazl Mostafavi

    2014-01-01

    Conclusion: Metfornin chewing gum had suitable appearance and appropriate invitro characteristics that fallow the pharmacopeia suggestions. This chewable gum showed bitterness suppression with a suitable release rate.

  18. Characterization and in vitro drug release studies of a natural polysaccharide Terminalia catappa gum (Badam gum).

    Science.gov (United States)

    Meka, Venkata Srikanth; Nali, Sreenivasa Rao; Songa, Ambedkar Sunil; Kolapalli, Venkata Ramana Murthy

    2012-12-01

    The main objective of the present study is the physicochemical characterization of naturally available Terminalia catappa gum (Badam gum [BG]) as a novel pharmaceutical excipient and its suitability in the development of gastroretentive floating drug delivery systems (GRFDDS) to retard the drug for 12 h when the dosage form is exposed to gastrointestinal fluids in the gastric environment. As BG was being explored for the first time for its pharmaceutical application, physicochemical, microbiological, rheological, and stability studies were carried out on this gum. In the present investigation, the physicochemical properties, such as micromeritic, rheological, melting point, moisture content, pH, swelling index, water absorption, and volatile acidity, were evaluated. The gum was characterized by scanning electron microscopy, differential scanning calorimetry (DSC), powder X-ray diffraction studies (PXRD), and Fourier transform infrared spectroscopy (FTIR). Gastroretentive floating tablets of BG were prepared with the model drug propranolol HCl by direct compression methods. The prepared tablets were evaluated for all their physicochemical properties, in vitro buoyancy, in vitro drug release, and rate order kinetics. PBG 04 was selected as an optimized formulation based on its 12-h drug release and good buoyancy characteristics. The optimized formulation was characterized with FTIR, DSC, and PXRD studies, and no interaction between the drug and BG was found. Thus, the study confirmed that BG might be used in the gastroretentive drug delivery system as a release-retarding polymer.

  19. Increased gum arabic production after infestation of Acacia senegal ...

    African Journals Online (AJOL)

    Jane

    2011-07-20

    Jul 20, 2011 ... changes in some physical properties of gum (colour, shape, size, moisture content and optical rotation) and chemical properties .... rotation with long fallow periods (15 to 20 years) of gum cultivation interspersed with short ..... G.A. fiber as a supplement to low protein diet in chronic renal failure patients. In: ...

  20. Increased gum arabic production after infestation of Acacia senegal ...

    African Journals Online (AJOL)

    The aim of this study was to investigate the correlation between the beetle Agrilus nubeculosus and gum arabic production by Acacia senegal. Some trees were tapped and left open to facilitate infestation by A. nubeculosus and others were covered with wire mesh as control. Gum yield, physical and chemical properties of ...

  1. Intrinsic viscosity of guar gum in sweeteners solutions | Samavati ...

    African Journals Online (AJOL)

    Rheological methods were applied to study the effect of sweeteners on the rheological behavior of guar gum in dilute solutions. The concentration of the sweeteners were 0.1, 0.2%w/v for aspartame, acesulfame-k and cyclamate, and 0.001, 0.002%w/v for neotame. Gum was evaluated for intrinsic viscosity by various ...

  2. Grewia Gum 1: Some Mechanical and Swelling Properties of ...

    African Journals Online (AJOL)

    Purpose: To study the mechanical and dynamic swelling properties of grewia gum, evaluate its compression behaviour and determine the effect of drying methods on its properties. Methods: Compacts (500 mg) of both freeze-dried and air-dried grewia gum were separately prepared by compression on a potassium bromide ...

  3. Gellan Gum: Fermentative Production, Downstream Processing and Applications

    Directory of Open Access Journals (Sweden)

    Ishwar B. Bajaj

    2007-01-01

    Full Text Available The microbial exopolysaccharides are water-soluble polymers secreted by microorganisms during fermentation. The biopolymer gellan gum is a relatively recent addition to the family of microbial polysaccharides that is gaining much importance in food, pharmaceutical and chemical industries due to its novel properties. It is commercially produced by C. P. Kelco in Japan and the USA. Further research and development in biopolymer technology is expected to expand its use. This article presents a critical review of the available information on the gellan gum synthesized by Sphingomonas paucimobilis with special emphasis on its fermentative production and downstream processing. Rheological behaviour of fermentation broth during fermentative production of gellan gum and problems associated with mass transfer have been addressed. Information on the biosynthetic pathway of gellan gum, enzymes and precursors involved in gellan gum production and application of metabolic engineering for enhancement of yield of gellan gum has been specified. Characteristics of gellan gum with respect to its structure, physicochemical properties, rheology of its solutions and gel formation behaviour are discussed. An attempt has also been made to review the current and potential applications of gellan gum in food, pharmaceutical and other industries.

  4. Current evidence on the anticancer potential of Chios mastic gum.

    Science.gov (United States)

    Giaginis, Constantinos; Theocharis, Stamatios

    2011-11-01

    Chios mastic gum derived from the plant Pistacia lentiscus L. variation chia has been shown to exert beneficial effects on a wide range of human disorders. The most comprehensive data so far have indicated that mastic gum provides protection against gastrointestinal malfunctions and bacterial infections. Substantial evidence has also suggested that mastic gum exhibits hepatoprotective and cardioprotective, antiinflammatory/antioxidant, and antiatherogenic properties. In the last decade, an increasing number of studies further evaluated the potential antiproliferative properties of mastic gum against several types of human neoplasia. The present review aims to summarize the current data concerning the anticancer activities of mastic gum and their major constituents, highlighting also the molecular mechanisms through which they exert anticancer function. Mastic gum constituents that belong to the chemical class of triterpenoids appear to be mainly responsible for its anticancer potential. Thus, a brief discussion is dedicated to the anticancer activity of synthetic and naturally occurring triterpenoid analogues with similar chemical structure to mastic gum constituents. Taking into consideration the available data so far, Chios mastic gum could be considered as a conglomeration of effective anticancer drugs.

  5. Entandophragma angolense Gum as a Novel Binder and ...

    African Journals Online (AJOL)

    Michael

    the development of oral controlled release dosage forms. These semisynthetic polymers are quite expensive when compared with natural polymers such as guar gum and alginates, while the natural polymers are nontoxic and readily available [18]. The present study was designed to evaluate the hydrophilic natural gum ...

  6. Evaluation of the bioadhesive property of Grewia gum in ...

    African Journals Online (AJOL)

    The bioadhesive property of grewia gum for sustained release of Indomethacin from tablets was evaluated using pig gastric mucus as substrate. The tablets formulated by wet granulation contained 75 mg of the drug and 15 or 20 %w/w of the gum. Similar tablets made differently with carbopol 934, tragacanth and sodium ...

  7. Evaluation of the suspending properties of Abizia zygia gum on ...

    African Journals Online (AJOL)

    Method: The suspending properties of Albizia zygia gum (family Mimosoideae) were evaluated comparatively with those of Compound Tragacanth, Acacia and Gelatin at concentration range of 0.5 – 4.0%w/v in Sulphadimidine suspension. Characterization tests were carried out on purified Albizia zygia gum. Sedimentation ...

  8. Gum Arabic as a Cause of Occupational Allergy

    Directory of Open Access Journals (Sweden)

    Arja Viinanen

    2011-01-01

    Full Text Available Background. Gum arabic is a potential sensitizer in food industry. Methods. We examined 11 candy factory workers referred to examinations due to respiratory and skin symptoms paying attention to exposure and sensitization to gum arabic. Skin tests, pulmonary function tests, and respiratory provocation tests were carried out as indicated by the symptoms and findings. Results. Occupational asthma, caused by gum arabic was diagnosed in 4/11 candy factory workers and two of them had also occupational contact urticaria and one had occupational rhinitis. One of them had oral symptoms associated with ingestion of products containing gum arabic. Conclusions. Airborne exposure to gum arabic may cause sensitization leading to allergic rhinitis, asthma, and urticaria.

  9. Produção de óleo essencial e balanço nutricional em Corymbia citriodora adubada com lodo de esgoto em diferentes espaçamentos

    Directory of Open Access Journals (Sweden)

    Paulo Henrique Müller da Silva

    2009-09-01

    Full Text Available The Corymbia citriodora is one of the most cultivated species in Brazil for wood and essential oil production. The oil is obtained by the leaves distillation and the yield is around 2%. For the sustainability of leaves extraction is necessary a good nutritional replacement, because the leaves contain a large quantity of nutrients. The sewage sludge application in Corymbia plantations is a way to apply organic fertilizer and is also a good alternative for the final disposal of this residue. In this context, the objective of this study was to evaluate the sewage sludge use as fertilizer for the essential oil production in two different spacing. The experiment was constituted by 4 blocks and the treatments were: i Close spacing (1m x 1m with sewage sludge + K and B; ii Close spacing with mineral fertilization; iii Regular spacing (3m x 1m with sewage sludge + K and B; and iv Regular spacing with mineral fertilization. When the C. citriodora plots were 12, 18, 24 and 30 months old; leaves and branches biomass and also essential oil production were quantified. It was observed that the system of close planting totalized a higher biomass, 3.8 times more than the conventional system, providing 3 times more essential oil production (363 l ha-1 at the close spacing and 116 l ha-1 at the regular spacing during 30 months. No difference was found in the leaves or oil production with the use of sewage sludge or mineral fertilizer any of spacing studied. The use of sewage sludge as fertilizer for Corymbia citriodora plantations may be an interesting alternative, because it supplies large quantities of nutrients and ensures a positive budget of nutrients in the ecosystem.

  10. Spot market for uranium

    International Nuclear Information System (INIS)

    Colhoun, C.

    1982-01-01

    The spot market is always quoted for the price of uranium because little information is available about long-term contracts. A review of the development of spot market prices shows the same price curve swings that occur with all raw materials. Future long-term contracts will probably be lower to reflect spot market prices, which are currently in the real-value range of $30-$35. An upswing in the price of uranium could come in the next few months as utilities begin making purchases and trading from stockpiles. The US, unlike Europe and Japan, has already reached a supply and demand point where the spot market share is increasing. Forecasters cannot project the market price, they can only predict the presence of an oscillating spot or a secondary market. 5 figures

  11. Biologia do psilídeo-de-concha Glycaspis brimblecombei Moore (Hemiptera, Psyllidae em Eucalyptus spp. Red gum lerp psyllid Glycaspis brimblecombei Moore (Hemiptera, Psylidae biology in Eucalyptus spp.

    Directory of Open Access Journals (Sweden)

    Daniela Cristina Firmino-Winckler

    2009-01-01

    Full Text Available Biologia do psilídeo-de-concha Glycaspis brimblecombei Moore (Hemiptera, Psyllidae em Eucalyptus spp.. Glycaspis brimblecombei Moore também conhecido por psilídeo-de-concha, se caracteriza por ser uma espécie específica ao gênero Eucalyptus L'Her. Este trabalho teve por objetivo determinar o ciclo biológico de G. brimblecombei em Eucalyptus spp. O trabalho foi conduzido em câmara climatizada (BOD, sob a temperatura de 26 °C e fotofase de 12 horas. As espécies de Eucalyptus utilizadas para o experimento foram: Eucalyptus camaldulensis, E. tereticornis, E. urophylla, E. grandis, Corymbia citriodora e um híbrido de E. grandis x E. urophylla ('urograndis'. Inicialmente foram utilizados 100 repetições (ninfas tratamento (espécies de Eucalyptus. As avaliações foram diárias. Os parâmetros biológicos avaliados foram a duração e viabilidade do estágio ninfal, longevidade dos adultos, número de posturas/fêmea, duração do período embrionário, número e viabilidade ovos, longevidade dos adultos e duração do ciclo total. Os resultados obtidos demonstraram que salvo C. citriodora que apresentou ser letal ao desenvolvimento ninfal de G. brimblecombei as demais espécies de Eucalyptus testadas oferecem condições ao desenvolvimento biológico deste psilídeo, sendo que neste trabalho E. camaldulensis mostrou-se a mais adequada.Glycaspis brimblecombei Moore, also known as red gum lerp psyllid, is characterized to be specific to the genus Eucalyptus. This work aimed to evaluate G. brimblecombei biological cycle in Eucalyptus spp. The work was accomplished in acclimatized chamber (BOD, with temperature of 26 °C and photophase of 12 hours. Eucalyptus species used in this study were: Eucalyptus camaldulensis, E. tereticornis, E. urophylla, E. grandis, Corymbia citriodora and E grandis x E. urophylla hybrid ('urograndis'. Initially 100 replications (nymphs per treatment (Eucalyptus species were prepared. The evaluations were daily and

  12. Flavor-Enhanced Modulation of Cerebral Blood Flow during Gum Chewing.

    Directory of Open Access Journals (Sweden)

    Yoko Hasegawa

    Full Text Available Flavor perception, the integration of taste and odor, is a critical factor in eating behavior. It remains unclear how such sensory signals influence the human brain systems that execute the eating behavior.WE TESTED CEREBRAL BLOOD FLOW (CBF IN THE FRONTAL LOBES BILATERALLY WHILE SUBJECTS CHEWED THREE TYPES OF GUM WITH DIFFERENT COMBINATIONS OF TASTE AND ODOR: no taste/no odor gum (C-gum, sweet taste/no odor gum (T-gum, and sweet taste/lemon odor gum (TO-gum. Simultaneous recordings of transcranial Doppler ultrasound (TCD and near infrared spectrometer (NIRS were used to measure CBF during gum chewing in 25 healthy volunteers. Bilateral masseter muscle activity was also monitored.We found that subjects could discriminate the type of gum without prior information. Subjects rated the TO-gum as the most flavorful gum and the C-gum as the least flavorful. Analysis of masseter muscle activity indicated that masticatory motor output during gum chewing was not affected by taste and odor. The TCD/NIRS measurements revealed significantly higher hemodynamic signals when subjects chewed the TO-gum compared to when they chewed the C-gum and T-gum.These data suggest that taste and odor can influence brain activation during chewing in sensory, cognitive, and motivational processes rather than in motor control.

  13. The rheological properties of tara gum (Caesalpinia spinosa).

    Science.gov (United States)

    Wu, Yanbei; Ding, Wei; Jia, Lirong; He, Qiang

    2015-02-01

    The rheological properties of tara gum, as affected by concentration, temperature, pH and the presence of salts and sucrose, were investigated by using steady and dynamic shear measurements and atomic force microscope observation. Tara gum exhibited non-Newtonian, pseudoplastic behaviour without thixotropy at tested concentrations (0.2-1.0%, w/v). Salts (CaCl2 and NaCl) led to a viscosity reduction, which was more sensitive to Ca(2+) than to Na(+). The gum had stable viscosity over a wide pH range (pH 3-11), and the influence of sucrose was concentration dependent. Increasing temperature from 20°C to 80°C decreased the gum viscosity. Frequency sweeps indicated that tara gum (1.0% w/v) behaved as a liquid at low frequency, and acted more like a gel at high frequency. With the decrease of concentration, tara gum may show a viscous property rather than an elastic one. These results are potentially useful for the application of tara gum in food processing. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Carboxymethylation of Cassia angustifolia seed gum: synthesis and rheological study.

    Science.gov (United States)

    Rajput, Gaurav; Pandey, I P; Joshi, Gyanesh

    2015-03-06

    The seeds of Cassia angustifolia are a rich source of galactomannan gum. The seed gums possess a wide variety of industrial applications. To utilize C. angustifolia seed gum for broader industrial applications, the carboxymethyl-Cassia angustifolia seed gum (CM-CAG) was synthesized. The gum was etherified with sodium monochloroacetate (SMCA) in a methanol-water system in presence of alkali (NaOH) at different reaction conditions. The variables studied includes alkali concentration, SMCA concentration, methanol:water ratio, liquor:gum ratio, reaction temperature and time. The extent of carboxymethylation was determined as degree of substitution (DS). The optimum conditions for preparing CM-CAG (DS=0.474) comprised 0.100 mol of NaOH, 0.05 mol of SMCA, 80% of methanol:water ratio (as % methanol) and liquor:gum ratio (v/w) of 10:1 at 75 °C for 60 min using 0.03 mol (as AGU) of CAG. Rheological studies showed CM-CAG to exhibit non-Newtonian pseudoplastic behaviour, relatively high viscosity, cold water solubility and solution stability. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Gum chewing modulates heart rate variability under noise stress.

    Science.gov (United States)

    Ekuni, Daisuke; Tomofuji, Takaaki; Takeuchi, Noriko; Morita, Manabu

    2012-12-01

    Gum chewing may relieve stress, although this hypothesis has not been proven. Heart-rate variability (HRV) is commonly used to measure stress levels. However, it is not known if gum chewing modulates HRV under acute stress. The aim of this study was to investigate the effects of gum chewing on HRV under acute stress. A cross-over study involving 47 non-smoking healthy subjects, aged 22-27 years, was carried out. The subjects received a stress procedure with gum chewing (GS group) and without gum chewing (S group). Additionally, the other 20 subjects were allocated to the gum chewing without stress group (G group). The GS and S groups were exposed to noise for 5 min (75 dBA) as stress. Before and after stress exposure/gum chewing, participants completed the state portion of the State-Trait Anxiety Inventory (STAI-s) and a single Stress Visual Analogue Scale (VAS) measurement. HRV measurement was performed before and during stress/gum chewing for 5 min. After the stress procedure, VAS score significantly increased in the GS and S groups. During the stress procedure, the GS group showed a significantly lower level of high frequency (HF) and higher levels of low frequency (LF) and LF/HF than the S group. However, there were no significant differences in the scores of the state portion of the State-Trait Anxiety Inventory (STAI-s) and VAS between the two stress groups. These findings suggest that gum chewing modulates HRV, but may not relieve acute stress caused by noise.

  16. Modification mechanism of sesbania gum, and preparation, property, adsorption of dialdehyde cross-linked sesbania gum.

    Science.gov (United States)

    Tang, Hongbo; Gao, Shiqi; Li, Yanping; Dong, Siqing

    2016-09-20

    This paper studied the modification mechanism of Sesbania gum (SG) by means of the variations in the numbers of surface hydroxyl groups on the granules, Schiff's agent coloration of aldehyde groups, Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD), energy dispersive spectrum (EDS), etc., and also examined the preparation, property and adsorption of dialdehyde cross-linked sesbania gum (DCLSG). The results showed that the surface hydroxyl numbers of cross-linked sesbania gum (CLSG) decreased with increasing the cross-linking degree. The distribution of the aldehyde groups on the DCLSG particles was nonuniform because most of aldehyde groups mainly located on the edge of particles. The cross-linking occurred only on the surface of SG particles. The oxidization occurred not only on the surface of SG particles, but also in the interior of particles. The cross-linking or oxidization changed the thermal properties, and reduced the swelling power, viscosity, alkali and acid resistance of SG. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Electron beam irradiation effects on xanthan gum, rheological aspects

    International Nuclear Information System (INIS)

    Mastro, N.L. del; Vieira, F.F.

    2003-01-01

    Food ingredients to be used for food processing should be decontaminated in order to prevent food spoilage and food-borne diseases. Xanthan gum is a well-known microbial polysaccharide produced by Xanthomonas campestris used in the hydrocolloid market. This paper describes the application of electron beam (EB) irradiation to xanthan gum as used as ingredient by the food or cosmetics industry in order to establish their radiosensitivity. Viscosity of 1% xanthan gum solutions prepared with the irradiated powder decreased with the increase of the EB irradiation dose. The radiation-induced viscosity detriment of this additive must be considered for practical applications. (author)

  18. Mononucleosis spot test

    Science.gov (United States)

    Monospot test; Heterophile antibody test; Heterophile agglutination test; Paul-Bunnell test; Forssman antibody test ... The mononucleosis spot test is done when symptoms of mononucleosis are ... Fatigue Fever Large spleen (possibly) Sore throat Tender ...

  19. In vitro tooth whitening effect of two medicated chewing gums compared to a whitening gum and saliva.

    Science.gov (United States)

    Moore, Michael; Hasler-Nguyen, Nathalie; Saroea, Geoffrey

    2008-08-11

    Extrinsic staining of teeth may result from the deposition of a variety of pigments into or onto the tooth surface, which originate mainly from diet or from tobacco use. More recently, clinical studies have demonstrated the efficacy of some chewing gums in removing extrinsic tooth staining. The aim of this study was to assess the effectiveness of two nicotine medicated chewing gums (A and B) on stain removal in an in vitro experiment, when compared with a confectionary whitening chewing gum (C) and human saliva (D). Bovine incisors were stained by alternating air exposure and immersion in a broth containing natural pigments such as coffee, tea and oral microorganisms for 10 days. Stained enamel samples were exposed to saliva alone or to the test chewing gums under conditions simulating human mastication. The coloration change of the enamel samples was measured using a spectrophotometer. Measurements were obtained for each specimen (average of three absorbances) using the L*a*b scale: lightness (L*), red-green (a) and yellow-blue (b). Medicated chewing gums (A and B) removed a greater amount of visible extrinsic stain, while the confectionary chewing gum with a whitening claim (C) had a milder whitening effect as evaluated by quantitative and qualitative assessment. The tested Nicotine Replacement Therapy (NRT) chewing gums were more effective in the removal of the extrinsic tooth stain. This visible improvement in tooth whitening appearance could strengthen the smokers' motivation to quit smoking.

  20. Rheological properties of grouts with viscosity modifying agents as diutan gum and welan gum incorporating pulverised fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Mohammed Sonebia [Queen' s University Belfast, Belfast (United Kingdom). School of Planning, Architecture and Civil Engineering

    2006-09-15

    This investigation was undertaken to evaluate the influence of the dosage of the second generation of viscosity modifying agent (diutan gum) on fluidity and rheological parameters of cement-based materials grout compared to welan gum. All grouts were made with 0.40 water-to-binder ratio (W/B). The fresh properties of control grouts made without any viscosity modifying agent (VMA) and with superplasticizer (SP) were compared to those of grouts made with 0.02, 0.04, 0.06 and 0.08% diutan gum by mass of binder. Similar mixes made with welan gum were compared to those containing diutan gums. The effect of admixtures on fluidity and rheological parameters are discussed in this paper. The effect of the replacement of cement by pulverised fly ash (PFA) was also investigated. Grouts with replacements of PFA of 5, 13 and 20% by mass were used with the same W/B. Similar control grouts and mixes incorporated different dosages of PFA made with welan gum were made in order to compare the fluidity and the rheological parameters to the previous grouts made with diutan gum.

  1. In vitro tooth whitening effect of two medicated chewing gums compared to a whitening gum and saliva

    Directory of Open Access Journals (Sweden)

    Saroea Geoffrey

    2008-08-01

    Full Text Available Abstract Background Extrinsic staining of teeth may result from the deposition of a variety of pigments into or onto the tooth surface, which originate mainly from diet or from tobacco use. More recently, clinical studies have demonstrated the efficacy of some chewing gums in removing extrinsic tooth staining. The aim of this study was to assess the effectiveness of two nicotine medicated chewing gums (A and B on stain removal in an in vitro experiment, when compared with a confectionary whitening chewing gum (C and human saliva (D. Methods Bovine incisors were stained by alternating air exposure and immersion in a broth containing natural pigments such as coffee, tea and oral microorganisms for 10 days. Stained enamel samples were exposed to saliva alone or to the test chewing gums under conditions simulating human mastication. The coloration change of the enamel samples was measured using a spectrophotometer. Measurements were obtained for each specimen (average of three absorbances using the L*a*b scale: lightness (L*, red-green (a and yellow-blue (b. Results Medicated chewing gums (A and B removed a greater amount of visible extrinsic stain, while the confectionary chewing gum with a whitening claim (C had a milder whitening effect as evaluated by quantitative and qualitative assessment. Conclusion The tested Nicotine Replacement Therapy (NRT chewing gums were more effective in the removal of the extrinsic tooth stain. This visible improvement in tooth whitening appearance could strengthen the smokers' motivation to quit smoking.

  2. Modification of Portland cement mortars with cactus gum

    OpenAIRE

    Hernandez-Zaragoza, Juan-Bosco; Caballero-Badillo, Carlos-Eduardo; Rosas-Juarez, Arnulfo; Lopez-Lara, Teresa; Hinojosa-Torres, Jaime; Castano, Victor-Manuel

    2007-01-01

    ????????, ?? ?????????? ??????? ?? ?????? ????????-???????, ??? ???????????????? ? ????????? ???????????, ???????????? ?????????? ?????????? ??????, ????????? ? ????????? ?????????????? ???????. ???????? ?????????? ???????? ??? ????????? ???????? ??? ????????? ?? 65 %, ????????? ?? ???????????? ?????????. Portland cement-based mortars of the standard type used for modern constructions, were modified by adding liophilized cactus gum, extracted froman indigenous Mexican cactus. The results show...

  3. Use of Natural Gums and Mucilages as Pharmaceutical Excipients.

    Science.gov (United States)

    Hamman, Hannlie; Steenekamp, Jan; Hamman, Josias

    2015-01-01

    Polysaccharide rich gums and mucilages are produced by different natural sources such as plants, animals and microbial organisms to fulfil structural and physiological functions. Their diverse structural compositions with a broad range of physicochemical properties make them useful for inclusion in dosage forms for different purposes such as to improve manufacturing processes and/or to facilitate drug delivery. A number of natural gums and mucilages have been investigated for inclusion in pharmaceutical formulations for a variety of reasons. The search for new excipients continues to be an active topic in dosage form design and drug delivery research. The aim of this review article is to give an overview of the chemical nature of natural gums and mucilages and to discuss their applications in the formulation of pharmaceutical dosage forms. Special emphasis will be placed on the use of gums and mucilages in novel drug delivery systems, such as modified release dosage forms and delivery systems that target specific sites of delivery.

  4. Ask a Periodontist (Frequently Asked Questions about Gum Disease)

    Science.gov (United States)

    ... doing their job. Periodontists may also correct gum recession and cover up exposed root surfaces which can ... seeing a periodontist for a consultation is a great first step. There are a few ways to ...

  5. Studies on some Physicochemical Properties of the Plant Gum ...

    African Journals Online (AJOL)

    A. senegal, A. sieberiana and A. nilotica) in Batagarawa, Katsina State, were determined and compared. Data generated from the study confirm that there are a number of physicochemical differences between the gum exudates.

  6. Physicochemical and functional parameters of Cochlospermum vitifolium (bototo gum exudate

    Directory of Open Access Journals (Sweden)

    Maritza Coromoto Martínez

    2016-12-01

    Full Text Available The physicochemical parameters of Cochlospermum vitifolium they were evaluated and were linked to certain functional properties of industrial interest. The physicochemical parameters were determined by the classic methodology used for carbohydrates and the functional properties, as reported in the literature. The results obtained showed that the gum object of this study is low soluble in water, which corresponds with relatively high values of swelling indexes and water absorption capacity. Also, the intrinsic viscosity of the C. vitifolium exudate was related to a high molar mass, in the order of 106. Its emulsifying capacity is high, which is attributed to hydrophobic groups present in its structure. The gum gels at a minimum concentration, similar to that of the gum karaya (4.5%, but the gel that forms agglomerates, it is not uniform. The C. vitifolium gum exhibits important physicochemical and functional parameters which could serve as a criterion for testing its use in various industries.

  7. Oxidation of cashew tree gum exudate polysaccharide with TEMPO reagent

    OpenAIRE

    Cunha, Pablyana L. R.; Maciel, Jeanny S.; Sierakowski, Maria Rita; Paula, Regina C. M. de; Feitosa, Judith P. A.

    2007-01-01

    Cashew gum (CG), an exudate polysaccharide from Anacardium ocidentale trees, was oxidized with TEMPO reagent and the 7product (CGOX) characterized by spectroscopic techniques (FT-IR and NMR), chromatographic analyses (HPLC and GPC), viscosity measurements and thermal analysis (TGA). The yield of the reaction product was 96%. The uronic acid content in starting gum (7.2 m%) was increased to 36 m%. The degree of oxidation based on free galactose and glucose units was 68%. NMR data show that oxi...

  8. Natural polymers, gums and mucilages as excipients in drug delivery.

    Science.gov (United States)

    Kumar, Shobhit; Gupta, Satish Kumar

    2012-01-01

    Use of natural polymers, gums and mucilages in drug delivery systems has been weighed down by the synthetic materials. Natural based excipients offered advantages such as non-toxicity, less cost and abundantly availablity. Aqueous solubility of natural excipients plays an important role in their selection for designing immediate, controlled or sustained release formulations. This review article provide an overview of natural gum, polymers and mucilages as excipients in dosage forms as well as novel drug delivery systems.

  9. Extraction and characterization of artocarpus integer gum as pharmaceutical excipient.

    Science.gov (United States)

    Farooq, Uzma; Malviya, Rishabha; Sharma, Pramod Kumar

    2014-01-01

    Natural polymers are widely used as excipients in pharmaceutical formulations. They are easily available, cheap and less toxic as compared to synthetic polymers. This study involves the extraction and characterization of kathal (Artocarpus integer) gum as a pharmaceutical excipient. Water was used as a solvent for extraction of the natural polymer. Yield was calculated with an aim to evaluate the efficacy of the process. The product was screened for the presence of Micrometric properties, and swelling index, flow behavior, surface tension, and viscosity of natural polymers were calculated. Using a water based extraction method, the yield of gum was found to be 2.85%. Various parameters such as flow behavior, organoleptic properties, surface tension, viscosity, loss on drying, ash value and swelling index together with microscopic studies of particles were done to characterize the extracted gum. The result showed that extracted kathal gum exhibited excellent flow properties. The gum was investigated for purity by carrying out chemical tests for different phytochemical constituents and only carbohydrates were found to be present. It had a good swelling index (13 ± 1). The pH and surface tension of the 1% gum solution were found to be 6 ± 0.5 and 0.0627 J/m2, respectively. The ash values such as total ash, acid insoluble ash, and water soluble ash were found to be 18.9%, 0.67% and 4% respectively. Loss on drying was 6.61%. The extracted gum was soluble in warm water and insoluble in organic solvents. The scanning electron micrograph (SEM) revealed rough and irregular particles of the isolated polymer. The results of the evaluated properties showed that kathal-derived gum has acceptable pH and organoleptic properties and can be used as a pharmaceutical excipient to formulate solid oral dosage forms.

  10. Xylitol Chewing Gums on the Market: Do They Prevent Caries?

    Science.gov (United States)

    Alanzi, Abrar; Soderling, Eva; Varghese, Anisha; Honkala, Eino

    To measure the xylitol content in sugar-free chewing gums available on the market in Gulf Cooperation Council (GCC) countries in the Middle East, in order to identify those products that can provide the recommended daily dose of xylitol for caries prevention (6-7 g). Acid production from chewing gums was also measured in vitro and in vivo. Twenty-one chewing gums containing xylitol were identified and collected from the GCC market (Kuwait, Bahrain, Qatar, Saudi Arabia, UAE and Oman). Xylitol was extracted and its concentration was analysed using a special enzymatic kit. The pH of extracts was measured during 30-min incubation with Streptococcus mutans. Changes in saliva and plaque pH were noted in four subjects after the consumption of highly concentrated xylitol gums. The xylitol content in grams was clearly mentioned only on one product's label. Twelve products stated the percentage of xylitol (3.5% to 35%). The rest did not specify the amount. The mean measured weight of one piece of gum was 1.67 ± 0.38 g. The mean measured xylitol content/piece was 0.33 ± 0.21 g. Xylitol content was 0.5 g in 5 products. None of the highly concentrated xylitol gums showed a pH drop in vitro or in vivo. One chewing gum, containing xylitol and glucose, resulted in a low pH level (xylitol chewing gums sold on the GCC market do not provide the consumers with the recommended daily dose of xylitol for caries prevention. Clear, accurate labeling is recommended.

  11. GumTree-An integrated scientific experiment environment

    International Nuclear Information System (INIS)

    Lam, Tony; Hauser, Nick; Goetz, Andy; Hathaway, Paul; Franceschini, Fredi; Rayner, Hugh; Zhang, Lidia

    2006-01-01

    GumTree is an open source and multi-platform graphical user interface for performing neutron scattering and X-ray experiments. It handles the complete experiment life cycle from instrument calibration, data acquisition, and real time data analysis to results publication. The aim of the GumTree Project is to create a highly Integrated Scientific Experiment Environment (ISEE), allowing interconnectivity and data sharing between different distributed components such as motors, detectors, user proposal database and data analysis server. GumTree is being adapted to several instrument control server systems such as TANGO, EPICS and SICS, providing an easy-to-use front-end for users and simple-to-extend model for software developers. The design of GumTree is aimed to be reusable and configurable for any scientific instrument. GumTree will be adapted to six neutron beam instruments for the OPAL reactor at ANSTO. Other European institutes including ESRF, ILL and PSI have shown interest in using GumTree as their workbench for instrument control and data analysis

  12. Characterization of Grewia Gum, a Potential Pharmaceutical Excipient

    Directory of Open Access Journals (Sweden)

    Elijah.I.Nep

    2010-03-01

    Full Text Available Grewia gum was extracted from the inner stem bark of Grewia mollis and characterized by several techniques such as gas chromatography (GC, gel permeation chromatography (GPC, scanning electron microscopy (SEM, differential scanning calorimetry (DSC and thermogravimetric analysis of the extracted sample. Spectroscopic techniques such as x-ray photoelectron spectroscopy (XPS, fourier-transformed infrared (FT-IR, solid-state nuclear magnetic resonance (NMR, and 1H and 13C NMR techniques were also used to characterize the gum. The results showed that grewia gum is a typically amorphous polysaccharide gum containing glucose, rhamnose, galactose, arabinose and xylose as neutral sugars. It has an average molecular weight of 5925 kDa expressed as the pullulan equivalent. The gum slowly hydrated in water, dispersing and swelling to form a highly viscous dispersion exhibiting pseudoplastic flow behaviour. The polysaccharide gum is thermally stable and may have application as stabilizer or suspending agent in foods, cosmetics and in pharmaceuticals. It may have application as a binder or sustained-release polymer matrix in tablets or granulations.

  13. Fabrication and characterization of gum Arabic bonded Rhizophora spp. particleboards

    International Nuclear Information System (INIS)

    Abuarra, Ali; Hashim, Rokiah; Bauk, Sabar; Kandaiya, Sivamany; Tousi, Ehsan Taghizadeh

    2014-01-01

    Highlights: • Exploring gum Arabic as a binder for Rhizophora sp. particleboards. • The addition of gum Arabic improved overall properties. • Gum Arabic could be added to manufacture particleboards. - Abstract: Gum Arabic (GA) was used as a binder for the fabrication of Rhizophora spp. particleboards. The physical and mechanical properties of the bioadhesive bonded particleboards, including moisture content, internal bond (IB) strength, thickness swelling (TS), water absorption (WA) and field-emission scanning electron microscopy (FESEM) were used to characterize the manufactured particleboards. Three different particle sizes of the Rhizophora spp. with four adhesive levels were utilized. Results revealed that the addition of GA into the particleboards noticeably improved panel overall properties. The GA bonded particleboards resulted in smoother surfaces, more rigid texture and better internal bonding strength compared to binderless particleboards made without using any adhesive. All specimens had internal bond strength of more than the minimum requirement of the Japanese Industrial Standard JIS A-5908 Type-8 of 0.15 N/mm 2 and were noticed to increase by increasing the adhesive level. However the GA bonded particleboards had higher percentage of WA and the TS compared with the binderless boards. Microscopic study also revealed that particleboards bonded with the gum had better contact compared to the binderless boards. Based on these results, it could be concluded that gum Arabic is an effective natural substance that could be added to manufacture particleboards to improve some of panels’ physical and mechanical properties

  14. Oxidized Xanthan Gum and Chitosan as Natural Adhesives for Cork

    Directory of Open Access Journals (Sweden)

    Diana Paiva

    2016-07-01

    Full Text Available Natural cork stopper manufacturing produces a significant amount of cork waste, which is granulated and combined with synthetic glues for use in a wide range of applications. There is a high demand for using biosourced polymers in these composite materials. In this study, xanthan gum (XG and chitosan (CS were investigated as possible natural binders for cork. Xanthan gum was oxidized at two different aldehyde contents as a strategy to improve its water resistance. This modification was studied in detail by 1H and 13C nuclear magnetic resonance (NMR, and the degree of oxidation was determined by the hydroxylamine hydrochloride titration method. The performance of the adhesives was studied by tensile tests and total soluble matter (TSM determinations. Xanthan gum showed no water resistance, contrary to oxidized xanthan gum and chitosan. It is hypothesized that the good performance of oxidized xanthan gum is due to the reaction of aldehyde groups—formed in the oxidation process—with hydroxyl groups on the cork surface during the high temperature drying. Combining oxidized xanthan gum with chitosan did not yield significant improvements.

  15. Effect of guar and xanthan gums on functional properties of mango (Mangifera indica) kernel starch.

    Science.gov (United States)

    Nawab, Anjum; Alam, Feroz; Haq, Muhammad Abdul; Hasnain, Abid

    2016-12-01

    The effects of different concentrations of guar and xanthan gums on functional properties of mango kernel starch (MKS) were studied. Both guar and xanthan gum enhanced the water absorption of MKS. The addition of xanthan gum appeared to reduce the SP (swelling power) and solubility at higher temperatures while guar gum significantly enhanced the SP as well as solubility of MKS. The addition of both gums produced a reinforcing effect on peak viscosity of MKS as compared to control. Pasting temperature of MKS was higher than that of starch modified by gums indicating ease of gelatinization. Guar gum played an accelerative effect on setback but xanthan gum delayed the setback phenomenon during the cooling of the starch paste. Both gums were found to be effective in reducing the syneresis while gel firmness was markedly improved. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. Cotton-wool spots.

    Science.gov (United States)

    Brown, G C; Brown, M M; Hiller, T; Fischer, D; Benson, W E; Magargal, L E

    1985-01-01

    A series of 24 consecutive patients presenting with a fundus picture characterized by a predominance of cotton-wool spots, or a single cotton-wool spot, is reported. Excluded were patients with known diabetes mellitus. Etiologic conditions found included previously undiagnosed diabetes mellitus in five patients, systemic hypertension in five patients, cardiac valvular disease in two patients, radiation retinopathy in two patients, and severe carotid artery obstruction in two patients. Dermatomyositis, systemic lupus erythematosus, polyarteritis nodosa, leukemia, AIDS, Purtscher's retinopathy, metastatic carcinoma, intravenous drug abuse, partial central retinal artery obstruction, and giant cell arteritis were each found in one patient. In only one patient did a systemic workup fail to reveal an underlying cause. The presence of even one cotton-wool spot in an otherwise normal fundus necessitates an investigation to ascertain systemic etiologic factors.

  17. Solar drying of uruguayan red gum

    Directory of Open Access Journals (Sweden)

    Andrés Ono

    2011-04-01

    Full Text Available he use of solar energy as an alternative to non-renewable energy sources has been widely researched in the last decades. Compared to air drying, solar drying kilns can better control the drying process, resulting in a higher quality of the dry wood and lower final wood moisture content values. Investment and running costs for a solar drying kiln are lower than those of a conventional kiln. Moreover, the solar drying process can be advantageous for drying hardwoods which are traditionally considered difficult to dry such as eucalyptus wood of medium and high density (Red gums, known in Spanish as “Eucaliptos colorados”. The solar drying kiln naturally incorporates a daily high relative humidity period that can be similar to a conditioning or steaming step, although at a lower temperature.This results in fewer defects due to the drying process.A pilot scale 2.5 m3 semi-greenhouse type solar wood drying kiln was constructed at LATU (Uruguay Technological Laboratory in Montevideo, Uruguay. The operating conditions and the results from two drying runs are presented. Two species of red gum (Eucalyptus tereticornis Sm., ADD 870 kg/m3, and Eucalyptus camaldulensis Dehnh., ADD 800 kg/m3 were dried from initial average moisture contents (WMC of around 60% down to 10.0% and 12.7% in 108 days and 76 days, respectively. Boards were provided by the Grupo Forestal San Gregorio from trees harvested at Tacuarembo and Paysandu Departments from cattle shelter forests 60 and 70 years old.Mean volume shrinkage was 18% for E. tereticornis, and 16% for E. camaldulensis, and the level of defects was moderate. Residual stresses and moisture content gradients were observed for both species. Final moisture content values were similar compared to those obtained in conventional drying kilns but with longer drying periods and lower operating costs. This would make the solar drying process attractive to small and medium sized forest products industries in a small country

  18. Analytical studies on the gum exudate from Anogeissus leiocarpus

    International Nuclear Information System (INIS)

    Ahmed, Samia Eltayeb

    1999-04-01

    Anogeissus leiocarpus gum samples were collected as natural exudate nodules, from three different location. Physicochemical properties of gum samples were studied. results showed significant differences within each location in most parameters studied except refractive index value which was found to be constant in all samples. The effect of location on the properties of gum samples was also studied and the analysis of variance showed insignificant differences (P≤0.05) in all properties studied except in ash content. Inter nodule variations of gum from two different location were studied individually. Results showed significant differences for each parameter studied except for the refractive index value. The properties studied of all gum samples were as follows: 9.2% moisture, 3.4% ash, 0.72% nitrogen, 4.74% protein, -35.5 specific rotation, 1.68 relative viscosity, 4.2 pH, 1.334 refractive index, 14.3 uronic acid, 0.44% reducing sugar, 1336.0 equivalent weight and 0.68% tannin content. UV absorption spectra of gum samples and gum nodules were determined. Cationic composition of gum samples was also determined and the results showed that (Mg) has highest value in all samples studied followed by Fe, Na, K, Ca, Zn and trace amount of Mn, Co, Ni, Cd and Pb. The water holding capacity was found to be 65.5% and emulsifying stability was found to be 1.008. The component sugars of gum were examined by different methods followed by qualitative and quantitative analysis. Analysis of hydrolysate crude gum sample by HPLC show L-rhamnose (6.82), L-arabinose (48.08), D-galactose (11.26) and two unknown oligosaccharides having values (0.22 and 32.61). Some physicochemical properties were studied. Results showed significant differences in nitrogen and protein contents, specific rotation, relative viscosity, equivalent weight and pH of fractions, where as insignificant differences were observed in uronic acid content and refractive index values

  19. The deformation of 'Gum Metal' in nanoindentation

    International Nuclear Information System (INIS)

    Withey, E.; Jin, M.; Minor, A.; Kuramoto, S.; Chrzan, D.C.; Morris, J.W.

    2008-01-01

    'Gum Metal' describes a newly developed set of alloys with nominal composition Ti-24(Nb + V + Ta)-(Zr,Hf)-O. In the cold-worked condition these alloys have exceptional elastic elongation and high-strength; the available evidence suggests that they do not yield until the applied stress approaches the ideal strength of the alloy, and then deform by mechanisms that do not involve conventional crystal dislocations. The present paper reports research on the nanoindentation of this material in both the cold-worked and annealed conditions. Nanoindentation tests were conducted in situ in a transmission electron microscope (TEM) stage that allows the deformation process to be observed in real time, and ex situ in a Hysitron nanoindenter, with samples subsequently extracted for high-resolution TEM study. The results reveal unusual deformation patterns beneath the nanoindenter that are, to our knowledge, unique to this material. In the cold-worked alloy deformation is confined to the immediate neighborhood of the indentation, with no evidence of dislocation, twin or fault propagation into the bulk. The deformed volume is highly inhomogeneous; the deformation is accomplished by a series of incremental rotations that are ordinarily resolved into discrete nanodomains. The annealed material deforms in a similar way within the nanoindentation pit, but dislocations emanate from the pit boundary. These are pinned by microstructural barriers only a few nanometers apart, a condition that recent theory suggests is necessary for the material to achieve ideal strength

  20. Flavor improvement does not increase abuse liability of nicotine chewing gum.

    Science.gov (United States)

    Houtsmuller, Elisabeth J; Fant, Reginald V; Eissenberg, Thomas E; Henningfield, Jack E; Stitzer, Maxine L

    2002-06-01

    Because the taste of nicotine gum has impeded compliance with dosing recommendations, nicotine gum with improved taste (mint, orange) was developed and marketed. Prior to marketing, the Food and Drug Administration (FDA) required a rigorous abuse liability assessment to examine whether enhanced palatability of nicotine gum would increase its abuse liability. Subjective, physiological, and psychomotor effects of mint flavor and original nicotine gum were tested in adult smokers (22-55 years old); a group of younger subjects (18-21 years old) was also included to allow for assessment of abuse liability in young adults specifically. Amphetamine and confectionery gum served as positive controls for abuse liability and palatability. Subjects rated palatability of mint gum higher than original nicotine gum, but substantially lower than confectionery gum. Palatability decreased with increasing dose of nicotine. Neither original nor mint gum increased ratings of traditional abuse liability predictors [Good Effect, Like Effect, Morphine-Benzedrine Group (MBG) scales of Addiction Research Center Inventory (ARCI)], while amphetamine increased ratings of all these measures. Both flavors of nicotine gum decreased craving during 2 h of abstinence. These effects were more pronounced in the adult group and mint gum was more effective than original gum. Younger subjects reported fewer withdrawal symptoms and lower ratings for drug effects and flavor. Improved flavor of nicotine gum does not increase abuse liability, but may be associated with enhanced craving reduction.

  1. Physicochemical properties of cissus gum powder extracted with the aid of edible starches.

    Science.gov (United States)

    Iwe, M O; Obaje, P O; Akpapunam, M A

    2004-01-01

    Gum powder was extracted from the stem and root of the cissus (Cissus populnea Guill and perr Ampelidacae) plant using water. Extraction was facilitated by the incorporation of 25-50% edible starches of sweet cassava, sweet potato, and maize. Dry samples were milled and sieved through a 250-microm sieve. Proximate and physicochemical properties of the gum samples were determined using standard methods. Results of the proximate analyses showed that protein and ash contents of the root gum were appreciably higher than those of the stem gum. Values of the crude fiber and ether extract of the root gum were lower than those of the stem gum. Inclusion of edible starches in the extraction process appreciably lowered proximate values. Results of the physicochemical properties showed that cissus gum samples did not form true gel but a "putty-like" mass. Addition of starches at various levels did not alter the characteristic putty-like nature of the gum. The gum samples had a remarkably low oil absorption capacity. Cissus gum samples had appreciably higher emulsion capacity and stability than the samples containing starch. The pH of the cissus gum powder and those of the starch-containing samples lie in the low-acid range (5.69-6.49). Cissus gum samples were highly hygroscopic; however, the addition of starch lowered the hygroscopicity. Incorporation of 25% starch into cissus mucilage enhanced extraction of the gum without adverse alteration of the physicochemical properties.

  2. Resistência natural da madeira de Corymbia maculata (Hook. K.D.Hill & L.A.S. Johnson a fungos e cupins xilófagos, em condições de laboratório Wood natural resistance of Corymbia maculata (Hook. K.D.Hill & L.A.S Johnson to wood destroying fungi and termites, under laboratory tests

    Directory of Open Access Journals (Sweden)

    Juarez Benigno Paes

    2002-11-01

    Full Text Available A pesquisa teve o objetivo de avaliar a resistência natural da madeira de Corymbia maculata a fungos e a cupins xilófagos, em condições de laboratório. De peças radiais (tábuas que continham o cerne e o alburno intactos foram retirados corpos-de-prova de 2,00 x 2,00 x 1,00 cm, com a menor dimensão na direção tangencial (ensaio com fungos, e de 2,54 x 2,00 x 0,64 cm, com a maior dimensão na direção das fibras (ensaio com cupins, em quatro posições na direção medula-casca. As amostras foram submetidas à ação dos fungos Postia placenta, Neolentinus lepideus e Polyporus fumosus por 12 semanas, ou à ação de cupins do gênero Nasutitermes por 30 dias. Constatou-se que a resistência da madeira ao apodrecimento foi dependente da posição na direção medula-casca e dos fungos utilizados. As amostras retiradas nas posições mais externas do tronco foram mais deterioradas que as internas. Dentro de cada posição, os fungos causaram deterioração semelhante à madeira, exceto para a posição mais externa (alburno, em que o fungo P. fumosus causou menos deterioração que os demais. De modo geral, a madeira de C. maculata foi altamente resistente (posições internas ou resistente (posições externas aos fungos ensaiados. Somente para o fungo N. lepideus a posição mais externa foi moderadamente resistente. Quanto aos cupins, a resistência da madeira não foi afetada pela posição na direção medula-casca e apresentou uma baixa perda de massa para as posições analisadas. Além disto, os cupins causaram somente desgaste superficial à madeira, e morreram durante o ensaio, o que permitiu classificar a madeira de C.maculata como resistente aos cupins ensaiados.This research evaluated the natural resistance of Corymbia maculata wood to wood-destroying fungi and termites, under laboratory tests. Radial pieces (boards, containing intact heartwood and sapwood were transformed into test samples measuring 2.00 x 2.00 x 1.00 cm

  3. A NEW SPECIES OF INVASIVE GALL WASP (HYMENOPTERA: EULOPHIDAE: TETRASTICHINAE) ON BLUE GUM (EUCALYPTUS GLOBULUS) IN CALIFORNIA

    Science.gov (United States)

    The blue gum gall wasp, Selitrichodes globulus La Salle & Gates (Hymenoptera: Eulophidae: Tetrastichinae), is described as an invasive gall inducer on blue gum, Eucalyptus globulus (Myrtaceae), in California....

  4. STUDIES ON SOME PHYSICOCHEMICAL PROPERTIES OF LEUCAENA LEUCOCEPHALA BARK GUM

    Directory of Open Access Journals (Sweden)

    Vijetha Pendyala

    2010-06-01

    Full Text Available Gum exudates from Leucaena Leucocephala (Family: Fabaceae plants grown all over India were investigated for its physicochemical properties such as pH, swelling capacity and viscosities at different temperatures using standard methods. Leucaena Leucocephala bark gum appeared to be colorless to reddish brown translucent tears. 5 % w/v mucilage has pH of 7.5 at 28°C. The gum is slightly soluble in water and practically insoluble in ethanol, acetone and chloroform. It swells to about 5 times its original weight in water. A 5 %w/v mucilage concentration gave a viscosity value which was unaffected at temperature ranges (28-40°C. At concentrations of 2 and 5 %w/v, the gum exhibited pseudo plastic flow pattern while at 10 %w/v concentration the flow behaviour was thixotropic. The results indicate that the swelling ability of Leucaena Leucocephala (LL bark gum may provide potentials for its use as a disintegrant in tablet formulation, as a hydro gel in modified release dosage forms and the rheological flow properties may also provide potentials for its use as suspending and emulsifying agents owing to its pseudo plastic and thixotropic flow patterns.

  5. Aplikasi Campuran Alginat Dari Sargassum Crassifolium Dan Gum Sebagai Pengental Textile Printing

    Directory of Open Access Journals (Sweden)

    Subaryono Subaryono

    2015-12-01

    Full Text Available Penelitian aplikasi campuran alginat dari Sargassum crassifolium dan gum untuk meningkatkan viskositas alginat sebagai pengental pada textile printing telah dilakukan. Viskositas campuran alginat dengan guar gum, gum arab, dan locust bean gum diamati pada penyimpanan selama 8 jam. Produk terbaik diujikan sebagai pengental pada textile printing. Campuran alginat dengan guar gum pada perbandingan 90:10 dan 80:20 meningkatkan viskositas dan stabilitas alginat selama penyimpanan. Campuran alginat dengan gum arab dan locust bean gum akan menurunkan viskositas alginat sehingga tidak sesuai untuk aplikasi textile printing. Aplikasi campuran alginat dengan guar gum 90:10 dan 80:20 sebagai pengental pada tekstil printing menghasilkan produk akhir yang setara dengan pengental komersial manutex.

  6. Development of controlled release spheroids using Buchananiacochinchinesis gum

    Directory of Open Access Journals (Sweden)

    Narayan Babulal Gaikwad

    2013-03-01

    Full Text Available Chirauli nut gum was isolated from the bark of Buchanania cochinchinesis (fam. Anacadiacea and was used as a release modifier for the preparation of Diclofenac sodium spheroids using the extrusion spheronization technique. The process was studied for the effects on variables when making spheroids with satisfactory particle shape, size and size distribution. The prepared spheroids were characterized for surface morphology, qualitative surface porosity, friability, bulk density and flow properties. In vitro studies demonstrated that the release exhibited Fickian diffusion kinetics which was confirmed by the Higuchi and the Korsmeyer-Peppas models. The physico-chemical parameters of the gum could be correlated to the in vitro dissolution profile of the spheroids. The spheroids were not able to sustain the drug releases over 12 hours. A greater concentration of Chirauli nut gum and a process that can accommodate such greater concentrations may produce a formulation capable of significant sustained release.

  7. Cetirizine release from cyclodextrin formulated compressed chewing gum

    DEFF Research Database (Denmark)

    Stojanov, Mladen; Larsen, Kim Lambertsen

    2012-01-01

    Beside the efficient effect on masking cetirizine bitter taste, the cyclodextrins (CDs) as well could have influence on the release from the formulation. In vitro release profiles of cetirizine from compressed chewing gums containing α-, β- and γ-CD were investigated using a three cell chewing...... instead the complexes with respect to release yield. Thus unnecessary expenses for the complex preformulation may be avoided. Keywords: Cetirizine, chewing gum, cyclodextrin, complex, drug release...... apparatus. Different cetirizine/CD formulations were produced and analysed with respect to type of CD (α-, β- and γ-CD), the molar ratio between cetirizine and CD and the formulation of cetirizine (complex or physical mixture). Release experiments from all compressed chewing gum formulations gave similar...

  8. Chocolate spot of Eucalyptus

    OpenAIRE

    Cheewangkoon, R.; Groenewald, J.Z.; Hyde, K.D.; To-anun, C.; Crous, P.W.

    2012-01-01

    Chocolate Spot leaf disease of Eucalyptus is associated with several Heteroconium-like species of hyphomycetes that resemble Heteroconium s.str. in morphology. They differ, however, in their ecology, with the former being plant pathogenic, while Heteroconium s.str. is a genus of sooty moulds. Results of molecular analyses, inferred from DNA sequences of the large subunit (LSU) and internal transcribed spacers (ITS) region of nrDNA, delineated four Heteroconium-like species on Eucalyptus, name...

  9. Design, formulation and evaluation of Aloe vera chewing gum

    Science.gov (United States)

    Aslani, Abolfazl; Ghannadi, Alireza; Raddanipour, Razieh

    2015-01-01

    Background: Aloe vera has antioxidant, antiinflammatory, healing, antiseptic, anticancer and antidiabetic effects. The aim of the present study was to design and evaluate the formulation of Aloe vera chewing gum with an appropriate taste and quality with the indications for healing oral wounds, such as lichen planus, mouth sores caused by cancer chemotherapy and mouth abscesses as well as reducing mouth dryness caused by chemotherapy. Materials and Methods: In Aloe vera powder, the carbohydrate content was determined according to mannose and phenolic compounds in terms of gallic acid. Aloe vera powder, sugar, liquid glucose, glycerin, sweeteners and different flavors were added to the soft gum bases. In Aloe vera chewing gum formulation, 10% of dried Aloe vera extract entered the gum base. Then the chewing gum was cut into pieces of suitable sizes. Weight uniformity, content uniformity, the organoleptic properties evaluation, releasing the active ingredient in the phosphate buffer (pH, 6.8) and taste evaluation were examined by Latin square method. Results: One gram of Aloe vera powder contained 5.16 ± 0.25 mg/g of phenolic compounds and 104.63 ± 4.72 mg/g of carbohydrates. After making 16 Aloe vera chewing gum formulations, the F16 formulation was selected as the best formulation according to its physicochemical and organoleptic properties. In fact F16 formulation has suitable hardness, lack of adhesion to the tooth and appropriate size and taste; and after 30 min, it released more than 90% of its drug content. Conclusion: After assessments made, the F16 formulation with maltitol, aspartame and sugar sweeteners was selected as the best formulation. Among various flavors used, peppermint flavor which had the most acceptance between consumers was selected. PMID:26605214

  10. Metabolic Effects of Nicotine Gum and Cigarette Smoking: Potential Implications for Postcessation Weight Gain?

    Science.gov (United States)

    Klesges, Robert C.; And Others

    1991-01-01

    Twenty smoking women participated in nicotine gum and smoking administration, after which resting energy expenditures (REEs) were measured. Results indicated acute increase in REE for both nicotine gum and cigarettes. Metabolic rates for nicotine gum slowly returned to baseline; rates for cigarettes quickly fell significantly below baseline.…

  11. The role of time on task performance in modifying the effects of gum chewing on attention

    NARCIS (Netherlands)

    Tucha, Lara; Simpson, William

    Recent research examined the effects of chewing gum on attention and reported a significant interaction of gum chewing with time. Using a crossover within-subject design, the present study examined the effect of gum chewing on sustained attention in healthy adults over a period of 30 min. The

  12. Evaluation of the Binding Effect of Local Gum of Boswellia papyrifera ...

    African Journals Online (AJOL)

    In this work, B. papyrifera gum has been evaluated for its binding effect in paracetamol granules and tablet formulations in comparison with the commonly used binders, Acacia BP and PVP K-30. Some physicochemical properties of the extracted gum indicated that the gum exhibited solubility in water, absence of tannin and ...

  13. investigation of the effect of zinc oxide-modified gum arabic on polar ...

    African Journals Online (AJOL)

    BARTH EKWUEME

    Gum Arabic solution, a water-based adhesive, was modified with zinc oxide filler and the formulation was ... starch and dextrin, polyvinyl alcohol, cellulose nitrate, .... Zinc oxide-modified gum Arabic improved bond strength on ceramic due to dipole-dipole interactions as well as electrovalent bonds formed between gum ...

  14. El spot electoral negativo

    Directory of Open Access Journals (Sweden)

    Palma Peña-Jiménez

    2011-01-01

    Full Text Available l spot político tiene durante la campaña un objetivo final inequívoco: la consecución del voto favorable. Se dirige al cuerpo electoral a través de la televisión y de Internet, y presenta, en muchos casos, un planteamiento negativo, albergando mensajes destinados a la crítica frontal contra el adversario, más que a la exposición de propuestas propias. Este artículo se centra en el análisis del spot electoral negativo, en aquellas producciones audiovisuales construidas sin más causa que la reprobación del contrincante. Se trata de vídeos que, lejos de emplearse en difundir las potencialidades de la organización y las virtudes de su candidato –además de su programa electoral–, consumen su tiempo en descalificar al oponente mediante la transmisión de mensajes, muchas veces, ad hominem. Repasamos el planteamiento negativo del spot electoral desde su primera manifestación, que en España data de 1996, año de emisión del conocido como vídeo del dóberman, sin olvidar otros ejemplos que completan el objeto de estudio.

  15. Safety Assessment of Microbial Polysaccharide Gums as Used in Cosmetics.

    Science.gov (United States)

    Fiume, Monice M; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2016-07-01

    The Cosmetic Ingredient Review Expert Panel assessed the safety of 34 microbial polysaccharide gums for use in cosmetics, finding that these ingredients are safe in cosmetic formulations in the present practices of use and concentration. The microbial polysaccharide gums named in this report have a variety of reported functions in cosmetics, including emulsion stabilizer, film former, binder, viscosity-increasing agent, and skin-conditioning agent. The Panel reviewed available animal and clinical data in making its determination of safety. © The Author(s) 2016.

  16. Locust bean gum: Exploring its potential for biopharmaceutical applications.

    Science.gov (United States)

    Dionísio, Marita; Grenha, Ana

    2012-07-01

    Polysaccharides have been finding, in the last decades, very interesting and useful applications in the biomedical and, specifically, in the biopharmaceutical field. Locust bean gum is a polysaccharide belonging to the group of galactomannans, being extracted from the seeds of the carob tree (Ceratonia siliqua). This polymer displays a number of appealing characteristics for biopharmaceutical applications, among which its high gelling capacity should be highlighted. In this review, we describe critical aspects of locust bean gum, contributing for its role in biopharmaceutical applications. Physicochemical properties, as well as strong and effective synergies with other biomaterials are described. The potential for in vivo biodegradation is explored and the specific biopharmaceutical applications are discussed.

  17. Fluorescence spectral studies of Gum Arabic: Multi-emission of Gum Arabic in aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Dhenadhayalan, Namasivayam, E-mail: ndhena@gmail.com [Department of Chemistry, National Taiwan University, Taipei, Taiwan (China); Mythily, Rajan, E-mail: rajanmythily@gmail.com [Department of Chemistry, Dwaraka Doss Goverdhan Doss Vaishnav College (Autonomous), 833, Gokul Bagh, E.V.R. Periyar Road, Arumbakkam, Chennai 600 106 (India); Kumaran, Rajendran, E-mail: kumaranwau@rediffmail.com [Department of Chemistry, Dwaraka Doss Goverdhan Doss Vaishnav College (Autonomous), 833, Gokul Bagh, E.V.R. Periyar Road, Arumbakkam, Chennai 600 106 (India)

    2014-11-15

    Gum Arabic (GA), a food hydrocolloid is a natural composite obtained from the stems and branches of Acacia Senegal and Acacia Seyal trees. GA structure is made up of highly branched arabinogalactan polysaccharides. Steady-state absorption, fluorescence, and time-resolved fluorescence spectral studies of acid hydrolyzed GA solutions were carried out at various pH conditions. The fluorescence in GA is predominantly attributed to the presence of tyrosine and phenylalanine amino acids. The presence of multi-emissive peaks at different pH condition is attributed to the exposure of the fluorescing amino acids to the aqueous phase, which contains several sugar units, hydrophilic and hydrophobic moieties. Time-resolved fluorescence studies of GA exhibits a multi-exponential decay with different fluorescence lifetime of varying amplitude which confirms that tyrosine is confined to a heterogeneous microenvironment. The existence of multi-emissive peaks with large variation in the fluorescence intensities were established by 3D emission contour spectral studies. The probable location of the fluorophore in a heterogeneous environment was further ascertained by constructing a time-resolved emission spectrum (TRES) and time-resolved area normalized emission spectrum (TRANES) plots. Fluorescence spectral technique is used as an analytical tool in understanding the photophysical properties of a water soluble complex food hydrocolloid containing an intrinsic fluorophore located in a multiple environment is illustrated. - Highlights: • The Manuscript deals with the steady state absorption, emission, fluorescence lifetime and time-resolved emission spectrum studies of Gum Arabic in aqueous medium at various pH conditions. • The fluorescence emanates from the tyrosine amino acid present in GA. • Change in pH results in marked variation in the fluorescence spectral properties of tyrosine. • Fluorescence spectral techniques are employed as a tool in establishing the

  18. Grewia gum as a potential aqueous film coating agent. I: Some physicochemical characteristics of fractions of grewia gum

    Directory of Open Access Journals (Sweden)

    Ikoni J Ogaji

    2013-01-01

    Full Text Available Background: Grewia gum has received attention as a polymeric pharmaceutical excipient in the recent times, being employed as a suspending, film coating, mucoadhesive, and binding agent. The low aqueous solubility, however, has limited its characterization and application. Objective: The purpose of this study was to fractionate and evaluate some physicochemical properties of the gum. Materials and Methods: Aqueous dispersion of the gum was treated at 80΀C for 30 min in the presence of sodium chloride and was subsequently fractionated by successively centrifuging it at 3445 rpm for 30 min. Skeletal density, solubility, particle size, and rheological as well as thermal characteristics of the fractions were evaluated. The 1 H nuclear magnetic resonance (NMR and near infrared (NIR profiles of the fractions were also investigated. The solubility of the gum increased up to fourfold while the viscosity decreased from 244 to as low as70 cP at 40 rpm with some fractions. Results: Grewia gum and the fractions showed good thermal stability exhibiting no thermal events, but charred irreversibly at 297΀C irrespective of the fraction. The molecular weight averages by weight and by number of the fractions were between 233,100 and 235,000. The 1 H nuclear magnetic resonance (NMR spectra showed broad peaks. The NMR and NIR spectra suggested the presence of -OH and -OCH 3 functional groups in this gum. Conclusion: The fractionation improved solubility and facilitated further investigations on its characteristics that may have implication on its processing, application, and optimization as a potential pharmaceutical excipient.

  19. Antileishmanial polyphenols from Corymbia maculata

    Indian Academy of Sciences (India)

    12) and gallic acid (13) were isolated from the active extracts. All the tested compounds except 8-demethyleucalyptin and myrciaphe- none B showed strong to moderate (6.9–24.5 μM) antileishmanial activity against Leishmania donovani pro-.

  20. Antileishmanial polyphenols from Corymbia maculata

    Indian Academy of Sciences (India)

    Twelve polyphenols including 8-demethyl eucalyptin (1), eucalyptin (2), myrciaphenone A (3), myrciaphe- none B (4) ... teen phloroglucinols and eight other polyphenols and can be applied for qualitative as well as quantitative determination of ..... were added to known amounts of ethyl acetate extract that was then ...

  1. Evaluation of the suspending property of grewia gum in ...

    African Journals Online (AJOL)

    The suspending properties evaluated included the sedimentation rate, sedimentation volume, ease of redispersibility, apparent viscosity and degree of flocculation. Results obtained after 8 weeks of storage showed that the optimum suspending concentration for grewia gum in the drug was 1% w/v. The sedimentation rate ...

  2. Evaluation of Local Gum of Acacia polyacantha as a Suspending ...

    African Journals Online (AJOL)

    The local gum of Acacia polyacantha was evaluated as a suspending agent in metronidazole benzoate suspensions in comparison with Acacia senegal and NaCMC at concentration range of 1-4% (w/v). The resulting suspensions were evaluated for their sedimentation volume (%), degree of flocculation, rheology, ...

  3. Isolated congenital fusion of the gums | Chiabi | African Journal of ...

    African Journals Online (AJOL)

    Isolated congenital fusion of the gums is a rare anomaly. Early surgical treatment is indicated, as longstanding cases will impair normal feeding leading to nutritional and growth problems. We report the fi rst case in the Yaoundé Gynaeco-Obstetric and Paediatric Hospital, which was successfully managed surgically

  4. Guar gum: a miracle therapy for hypercholesterolemia, hyperglycemia and obesity.

    Science.gov (United States)

    Butt, Masood Sadiq; Shahzadi, Naureen; Sharif, Mian Kamran; Nasir, Muhammad

    2007-01-01

    The number of hypercholesterolemic and hyperglycemic people is increasing rapidly in the world. The prevention against these health problems is related to a complex management of conventional and non-conventional risk factors. The inclusion of dietary fiber in the diet is the right approach to reduce these risks. Cholesterol and glucose lowering effects are most often associated with gelling, mucilaginous, and viscous fibers such as guar gum, an edible thickening agent. It has widespread applications in the food industry due to its ability to hydrate without heating. The demand for guar gum is still growing rapidly because in addition to its indispensable role in lowering serum cholesterol and glucose levels, it is also considered helpful in weight loss programs. The main thrust of therapeutic and medicinal properties lies in the soluble dietary fiber content of guar gum to improve the serum biochemical profile of human and non-human primates, reducing total serum cholesterol, triglycerides, increasing the high density lipoprotein cholesterol level, and the management of glycemic indices and obesity. Among the various intervention strategies, diet diversification is the right approach to overcome these problems. Composite flours containing wheat and legumes have proven practical uses and are being utilized in many parts of the world to improve the nutritional and functional properties of flour. The main focus of this manuscript is to review the available information on various aspects of guar gum with special reference to its effectiveness in reducing the cardiovascular disease risk, diabetes and weight loss programs.

  5. Original Article Gum Arabic in treatment of functional constipation in ...

    African Journals Online (AJOL)

    Background: Constipation represents a common problem in children. The worldwide prevalence of functional constipation in children varies from 0.7% to 29.6%. Objective: The aim of this study is to assess the response to Gum Arabic in addition to laxative in management of functional constipation. Methods: All children less ...

  6. Gellan gum fluid gels for topical administration of diclofenac.

    Science.gov (United States)

    Mahdi, Mohammed H; Conway, Barbara R; Mills, Thomas; Smith, Alan M

    2016-12-30

    Diclofenac topical formulations are often preferred for drug administration to patients who experience serious GIT problems. Absorption of the drug through the skin, however, can be challenging due to the natural protective feature of the stratum corneum (SC). In this article, fluid gels prepared from gellan gum were explored as a topical drug delivery vehicle. Rheological analysis of the formulations showed that it was possible to produce a topical gel with a viscosity and the mechanical strength similar to that of the commercially available Voltaren ® gel using 1% w/w of a 50:50 low acyl/high acyl (LA/HA) gellan blend. Soft-tribology was used to assess the lubrication properties of gellan fluid gels. The lubrication of the gellan gum fluid gel formulations at high rubbing speeds was similar to the lubrication of the Voltaren ® gel. The use of gellan gum dramatically increased skin permeation of diclofenac when compared with the commercially available formulation and could be controlled by changing the gellan gum concentration and/or sodium ion concentration in the formulation. This study highlights the potential use of fluid gels that can be easily tuned to have physical properties suitable for topical formulations with the added advantage of increasing drug permeation. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. 21 CFR 172.780 - Acacia (gum arabic).

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Acacia (gum arabic). 172.780 Section 172.780 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... exudate from stems and branches of trees of various species of the genus Acacia, family Leguminosae. (b...

  8. Radiation induced degradation of xanthan gum in aqueous solution

    Science.gov (United States)

    Hayrabolulu, Hande; Demeter, Maria; Cutrubinis, Mihalis; Güven, Olgun; Şen, Murat

    2018-03-01

    In our previous study, we have investigated the effect of gamma rays on xanthan gum in the solid state and it was determined that dose rate was an important factor effecting the radiation degradation of xanthan gum. In the present study, in order to provide a better understanding of how ionizing radiation effect xanthan gum, we have investigated the effects of ionizing radiation on aqueous solutions of xanthan at various concentrations (0.5-4%). Xanthan solutions were irradiated with gamma rays in air, at ambient temperature, at different dose rates (0.1-3.3-7.0 kGy/h) and doses (2.5-50 kGy). Change in their molecular weights was followed by size exclusion chromatography (SEC). Chain scission yield (G(S)), and degradation rate constants (k) were calculated. It was determined that, solution concentration was a factor effecting the degradation chemical yield and degradation rate of xanthan gum. Chain scission reactions were more effective for lower solution concentrations.

  9. Improvement of xanthan gum production in batch culture using ...

    African Journals Online (AJOL)

    Yomi

    2011-12-21

    Dec 21, 2011 ... In this study, the effect of acetic acid on the improvement of xanthan biosynthesis by Xanthomonas campestris b82 was investigated. ... have been considered to improve xanthan productivity, which include improvement of culture ..... continuous production of xanthan gum. Paper presented at the Fifth.

  10. Investigation of Transport Properties of a New Biomaterials - GUM Mangosteen

    Science.gov (United States)

    Pradhan, Sourav S.; Sarkar, A.

    2006-06-01

    Biomaterial has occupied leading position in material science for various scientific and technological applications. This present work is carried out over a natural gum extracted from raw fruit of Mangosteen, an east Indian tree (Gercinia Mangostana) following extraction and purification process. Solid specimen of the said gum is developed following sol-gel like process. AC and DC electrical analysis on the dried solid specimen of the gum were carried out and showed high electrical conduction with σ ~ 1 E-03 S/cm, of which ionic and electronic contributions are 70% and 30% respectively. Analysis shows that origin of high electrical conductivity is due to presence of substantial amount of organic acid unit in its polysaccharide background. In fact the observed σ is about 1000 times of that observed in gum Arabica. Optical absorption of this new bio- materials are also studied using UV-VIS analysis. The results show its high absorption co-efficient in UV and blue part of analysed range. A complete electrical characterization of the material have been made. It has also been observed that the electronic conduction can be enhanced to 70% of the total electrical conductivity by forming complex with Iodine and organic (Citric) acid from Lemon fruit. This high potential material is being studied for development of electronic device application.

  11. The efficacy of chewing gum on postoperative ileus following ...

    African Journals Online (AJOL)

    Background: Postoperative ileus (POI) is a common complication following caesarean section. It impairs patients comfort; delays wound healing and prolong duration of hospital stay. Several methods have been used in the management of this condition with varying efficacy. Chewing gum postoperatively is a recent concept ...

  12. Formulation and In vitro Evaluation of Natural Gum-Based ...

    African Journals Online (AJOL)

    Nigeria. The collection, purification and characterization of the natural gums have been described elsewhere [5,9]. All other reagents were of analytical grade. Preformulation studies. Preformulation studies were carried out using different chelating agents in order to optimize the formulation and physicochemical properties of.

  13. Cashew gum and gelatin blend for food packaging application

    Science.gov (United States)

    Cashew gum (CG) and gelatin (G) films were developed using the casting method and response surface methodology. The objective was produce packaging films from CG/G blends that exhibit effective barrier properties. A study of zeta potential versus pH was first carried out to determine the isoelectric...

  14. Electrospinning of guar gum/corn starch blends

    Science.gov (United States)

    In this study, electrospun nanofibers were prepared for the first time from aqueous blends of guar gum (GG) and corn starch with amylose contents of 27.8% (CS28) and 50% (CS50). The fiber morphology and fiber diameter sizes (FDS) were correlated with solution rheology. The spinning solutions were pr...

  15. Binding Properties Of A Polymeric Gum From Cola accuminata ...

    African Journals Online (AJOL)

    However all the tablets produced with 1 % w/w binder; Sodium carboxyl methyl cellulose (SCMC) and Cola accuminata failed the hardness test. Hardness increased while friability decreased as tablet binder concentration increased. However, the tablets produced with Cola accuminata gum had long disintegration times ...

  16. Iron microencapsulation in gum tragacanth using solvent evaporation method.

    Science.gov (United States)

    Asghari-Varzaneh, Elham; Shahedi, Mohammad; Shekarchizadeh, Hajar

    2017-10-01

    In this study iron salt (FeSO 4 ·7H 2 O) was microencapsulated in gum tragacanth hydrogel using solvent evaporation method. Three significant parameters (ferrous sulfate content, content of gum tragacanth, and alcohol to mixture ratio) were optimized by response surface methodology to obtain maximum encapsulation efficiency. Ferrous sulfate content, 5%, content of gum tragacanth, 22%, and alcohol to mixture ratio, 11:1 was determined to be the optimum condition to reach maximum encapsulation efficiency. Microstructure of iron microcapsules was thoroughly monitored using scanning electron microscopy (SEM). The microphotographs indicated two distinct crystalline and amorphous structures in the microcapsules. This structure was confirmed by X-ray diffraction (XRD) pattern of microcapsules. Fourier transform infrared (FTIR) spectra of iron microcapsules identified the presence of iron in the tragacanth microcapsules. The average size of microcapsules was determined by particle size analyzer. Release assessment of iron in simulated gastric fluid showed its complete release in stomach which is necessary for its absorption in duodenum. However, the use of encapsulated iron in gum tragacanth in watery foods is rather recommended due to the fast release of iron in water. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. blue gums fortress observation post simon's bay fire command 1942 ...

    African Journals Online (AJOL)

    In a letter dated 21 July 1942 the General Staff. Officer I at the Castle requested that accommo- dation for one White NCO and 20 members of 1. Battalion, Native Military Corps be provided at. Blue Gums. Ten days later the Fortress Com- mander submitted the request to the Quarter- master-General and advised him that the ...

  18. The Spotting Distribution of Wildfires

    Directory of Open Access Journals (Sweden)

    Jonathan Martin

    2016-06-01

    Full Text Available In wildfire science, spotting refers to non-local creation of new fires, due to downwind ignition of brands launched from a primary fire. Spotting is often mentioned as being one of the most difficult problems for wildfire management, because of its unpredictable nature. Since spotting is a stochastic process, it makes sense to talk about a probability distribution for spotting, which we call the spotting distribution. Given a location ahead of the fire front, we would like to know how likely is it to observe a spot fire at that location in the next few minutes. The aim of this paper is to introduce a detailed procedure to find the spotting distribution. Most prior modelling has focused on the maximum spotting distance, or on physical subprocesses. We will use mathematical modelling, which is based on detailed physical processes, to derive a spotting distribution. We discuss the use and measurement of this spotting distribution in fire spread, fire management and fire breaching. The appendix of this paper contains a comprehensive review of the relevant underlying physical sub-processes of fire plumes, launching fire brands, wind transport, falling and terminal velocity, combustion during transport, and ignition upon landing.

  19. Mango kernel starch-gum composite films: Physical, mechanical and barrier properties.

    Science.gov (United States)

    Nawab, Anjum; Alam, Feroz; Haq, Muhammad Abdul; Lutfi, Zubala; Hasnain, Abid

    2017-05-01

    Composite films were developed by the casting method using mango kernel starch (MKS) and guar and xanthan gums. The concentration of both gums ranged from 0% to 30% (w/w of starch; db). Mechanical properties, oxygen permeability (OP), water vapor permeability (WVP), solubility in water and color parameters of composite films were evaluated. The crystallinity and homogeneity between the starch and gums were also evaluated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The scanning electron micrographs showed homogeneous matrix, with no signs of phase separation between the components. XRD analysis demonstrated diminished crystalline peak. Regardless of gum type the tensile strength (TS) of composite films increased with increasing gum concentration while reverse trend was noted for elongation at break (EAB) which found to be decreased with increasing gum concentration. The addition of both guar and xanthan gums increased solubility and WVP of the composite films. However, the OP was found to be lower than that of the control with both gums. Furthermore, addition of both gums led to changes in transparency and opacity of MKS films. Films containing 10% (w/w) xanthan gum showed lower values for solubility, WVP and OP, while film containing 20% guar gum showed good mechanical properties. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Enzymatic depolymerization of gum Tragacanth: Bifidogenic potential of low molecular weight oligosaccharides

    DEFF Research Database (Denmark)

    Ahmadi Gavlighi, Hassan; Michalak, Malwina; Meyer, Anne S.

    2013-01-01

    Gum tragacanth derived from the plant “goat’s horn” (Astragalus sp.) has a long history of use as a stabilizing, viscosity-enhancing agent in food emulsions. The gum contains pectinaceous arabinogalactans and fucose-substituted xylogalacturonans. In this work, gum tragacanth from Astragalus gossy...... that on galactan (control). HAG3 completely inhibited the growth of the Cl. perfringens strain. Tragacanth gum is thus a potential source of prebiotic carbohydrates that exert no viscosity effects and which may find use as natural functional food ingredients.......Gum tragacanth derived from the plant “goat’s horn” (Astragalus sp.) has a long history of use as a stabilizing, viscosity-enhancing agent in food emulsions. The gum contains pectinaceous arabinogalactans and fucose-substituted xylogalacturonans. In this work, gum tragacanth from Astragalus...

  1. The Role of Xylitol Gum Chewing in Restoring Postoperative Bowel Activity After Cesarean Section.

    Science.gov (United States)

    Lee, Jian Tao; Hsieh, Mei-Hui; Cheng, Po-Jen; Lin, Jr-Rung

    2016-03-01

    The goal of this study was to evaluate the effects of xylitol gum chewing on gastrointestinal recovery after cesarean section. Women who underwent cesarean section (N = 120) were randomly allocated into Group A (xylitol gum), Group B (nonxylitol gum), or the control group (no chewing gum). Every 2 hr post-cesarean section and until first flatus, Groups A and B received two pellets of chewing gum and were asked to chew for 15 min. The times to first bowel sounds, first flatus, and first defecation were then compared among the three groups. Group A had the shortest mean time to first bowel sounds (6.9 ± 1.7 hr), followed by Group B (8 ± 1.6 hr) and the control group (12.8 ± 2.5 hr; one-way analysis of variance, p xylitol-containing gum may be superior to xylitol-free gum. © The Author(s) 2015.

  2. Relationships Between Gum Chewing and Stroop Test: A Pilot Study.

    Science.gov (United States)

    Kawakami, Y; Takeda, T; Konno, M; Suzuki, Y; Kawano, Y; Ozawa, T; Kondo, Y; Sakatani, K

    2017-01-01

    Cognitive function tends to decrease with aging, therefore maintenance of this function in an aging society is an important issue. The role of chewing in nutrition is important. Although several studies indicate that gum chewing is thought to improve cognitive function, it remains debatable whether gum-chewing does in fact improve cognitive function. The Stroop test is a psychological tool used to measure cognition. A shorter reaction time indicates a mean higher behavioral performance and higher levels of oxy-Hb concentration. fNIRS is a powerful, non-invasive imaging technique offering many advantages, including compact size, no need for specially equipped facilities, and the potential for real-time measurement. The left dorsolateral prefrontal cortex (DLPFC) seems to be mainly involved in the Stroop task.The aim of the present study was to investigate the hypothesis that gum-chewing changes cerebral blood flow in the left DLPFC during the Stroop test, and also changes the reaction time. Fourteen healthy volunteers (mean age 26.9 years) participated in this study after providing written informed consent. A piece of tasteless gum weighing 1.0 g was used. Each session was designed in a block manner, i.e. 4 rests (30 s) and 3 blocks of task (30 s). A computerized Stroop test was used (including both congruent and incongruent Stroop tasks) which calculates a response time automatically. The Binominal test was used for comparisons (p Stroop task and that gum chewing significantly increases responses/oxy-Hb concentration and significantly shortens the reaction time.

  3. Naturalistic assessment of demand for cigarettes, snus, and nicotine gum.

    Science.gov (United States)

    Stein, Jeffrey S; Wilson, A George; Koffarnus, Mikhail N; Judd, Michael C; Bickel, Warren K

    2017-01-01

    Behavioral economic measures of demand provide estimates of tobacco product abuse liability and may predict effects of policy-related price regulation on consumption of existing and emerging tobacco products. In the present study, we examined demand for snus, a smokeless tobacco product, in comparison to both cigarettes and medicinal nicotine. We used both a naturalistic method in which participants purchased these products for use outside the laboratory, as well as laboratory-based self-administration procedures. Cigarette smokers (N = 42) used an experimental income to purchase their usual brand of cigarettes and either snus or gum (only one product available per session) across a range of prices, while receiving all products they purchased from one randomly selected price. In a separate portion of the study, participants self-administered these products during laboratory-based, progressive ratio sessions. Demand elasticity (sensitivity of purchasing to price) was significantly greater for snus than cigarettes. Elasticity for gum was intermediate between snus and cigarettes but was not significantly different than either. Demand intensity (purchasing unconstrained by price) was significantly lower for gum compared to cigarettes, with no significant difference observed between snus and cigarettes. Results of the laboratory-based, progressive ratio sessions were generally discordant with measures of demand elasticity, with significantly higher "breakpoints" for cigarettes compared to gum and no significant differences between other study products. Moreover, breakpoints and product purchasing were generally uncorrelated across tasks. Under naturalistic conditions, snus appears more sensitive to price manipulation than either cigarettes or nicotine gum in existing smokers.

  4. Durabilidade de madeira de eucalipto citriodora (Corymbia citriodora (Hook. K.D. Hill & L.A.S. Johnson tratada com CCA em ambiente amazônico Durability of eucalyptus citriodora wood (Corymbia citriodora (Hook. K.D. Hill & L.A.S. Johnson treated with CCA in the Amazon environment

    Directory of Open Access Journals (Sweden)

    Henrique José Borges de Araujo

    2012-03-01

    Full Text Available A intensa exploração econômica tem causado diminuição do estoque original das espécies madeireiras amazônicas, incluindo aquelas de alta durabilidade natural destinadas a usos em contato com o solo. A escassez dessas madeiras resulta na elevação do preço, inviabilizando economicamente seu uso, sendo uma alternativa a substituição por espécies plantadas de rápido crescimento tratadas com preservativos. Outra vantagem, além da econômica, de utilizar espécies plantadas em substituição às tradicionais é ambiental, pois reduzirá a pressão exploratória sobre aquelas. Este estudo teve por objetivo avaliar o grau de degradação biológica de madeira de eucalipto citriodora (Corymbia citriodora (Hook. K.D. Hill & L.A.S. Johnson tratado por processo a vácuo e pressão com arseniato de cobre cromatado (CCA e exposta em ensaio de campo em Rio Branco-AC. O ensaio foi implantado em maio de 2005 com estacas tratadas ou não com CCA. As variáveis avaliadas foram: 1 degradação por fungos, 2 degradação por cupins, e 3 região ou parte da peça afetada. A partir da terceira avaliação (47 meses de ensaio, 100% dos corpos de prova não tratados foram classificados com o grau de degradação máximo e, ao contrário, 100% dos tratados com CCA, decorridos 60 meses de ensaio, foram classificados com o grau mínimo. As partes não tratadas com maior e menor grau de degradação foram, respectivamente, o topo inferior e a parte aérea acima de 10 cm do solo. A degradação provocada por fungos foi levemente inferior à dos cupins. O ensaio aponta para a viabilidade técnica do uso de madeira tratada de eucalipto em substituição às espécies tradicionais da Amazônia.The intense economic exploration has caused a decrease of the original stock of Amazon woody species, including those of high natural durability used in soil contact. The lack of those species results in increased price that makes economically unfeasible of the use, an

  5. A comparison of corn fiber gum, hydrophobically modified starch, gum arabic and soybean soluble polysaccharide: interfacial dynamics, viscoelastic response at oil/water interfaces and emulsion stabilization mechanisms

    Science.gov (United States)

    The interfacial rheology of polysaccharide adsorption layers of corn fiber gum (CFG), octenyl succinate anhydride-modified starch (OSA-s), gum arabic (GA) and soybean soluble polysaccharides (SSPS) at the oil/water interface and their emulsifying properties in oil-in-water (O/W) emulsions were compa...

  6. Advances in spot curing technology

    International Nuclear Information System (INIS)

    Burga, R.

    1999-01-01

    A brief review of spot curing technology was presented. The process which a spot of energy of a specific wavelength bandwidth and irradiance is used to cause a coating, encapsulant or adhesive to change from a liquid to a solid state

  7. Sulfomethylated graft copolymers of xanthan gum and polyacrylamide

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, I.W.; Empey, R.A.; Racciato, J.S.

    1978-08-08

    A water-soluble anionic graft copolymer of xanthan gum and polyacrylamide is described in which at least part of the amide function of the acrylamide portion of the copolymer is sulfomethylated and the xanthan gum portion of the copolymer is unreacted with formaldehyde. The copolymer is sulfomethylated by reaction with formaldehyde and sodium metabisulfite. The formaldehyde does not cause any appreciable cross-linking between hydroxyl groups of the xanthan moieties. The sulfomethylation of the acrylamido group takes place at temperatures from 35 to 70 C. The pH is 10 or higher, typically from 12 to 13. The degree of anionic character may be varied by adjusting the molar ratio of formaldehyde and sodium metabisulfite with respect to the copolymer. 10 claims.

  8. Microwave Assisted Grafting of Gums and Extraction of Natural Materials.

    Science.gov (United States)

    Singh, Inderbir; Rani, Priya; Kumar, Pradeep

    2017-01-01

    Microwave assisted modification of polymers has become an established technique for modifying the functionality of polymers. Microwave irradiation reduces reaction time as well as the use of toxic solvents with enhanced sensitivity and yields of quality products. In this review article instrumentation and basic principles of microwave activation have been discussed. Microwave assisted grafting of natural gums, characterization of grafted polymers and their toxicological parameters have also been listed. Pharmaceutical applications viz. drug release retardant, mucoahesion and tablet superdisintegrant potential of microwave assisted gums has also been discussed. An overview of microwave assisted extraction of plant based natural materials has also been presented. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  9. Locust bean gum: Exploring its potential for biopharmaceutical applications

    Directory of Open Access Journals (Sweden)

    Marita Dionísio

    2012-01-01

    Full Text Available Polysaccharides have been finding, in the last decades, very interesting and useful applications in the biomedical and, specifically, in the biopharmaceutical field. Locust bean gum is a polysaccharide belonging to the group of galactomannans, being extracted from the seeds of the carob tree (Ceratonia siliqua. This polymer displays a number of appealing characteristics for biopharmaceutical applications, among which its high gelling capacity should be highlighted. In this review, we describe critical aspects of locust bean gum, contributing for its role in biopharmaceutical applications. Physicochemical properties, as well as strong and effective synergies with other biomaterials are described. The potential for in vivo biodegradation is explored and the specific biopharmaceutical applications are discussed.

  10. Enhancement of electrical conductivity in the Gum Arabica complex

    International Nuclear Information System (INIS)

    Pradhan, Sourav S.; Sarkar, A.

    2009-01-01

    Gum Arabica is a natural biopolymer obtained from plant Acacia Arabica. In this present study the electro-active nature of its complex has been investigated. The complexes were developed using pure Gum Arabica and pure Citric acid by the sol-gel process. The scope of complex formation has been investigated and their natures were examined experimentally. The experiments which were carried out in this work are namely d.c V-I characteristics, d.c Arrhenius, ion transference number measurement, UV-VIS and IR photo-absorption. Solid specimen of the complex at various concentration of Citric acid has been developed for d.c experiments and adequate specimens were also developed for UV-VIS experiment. The result of d.c V-I characteristics on specimens at different Citric acid concentrations shows that d.c conductivity increases with concentration of the acid. The said enhancement is observed to be about 100 times that of pure hosts. The ion transference number measurement shows that the total conductivity increases with external acid concentration of which d.c conductivity enhance many times compared to that of ionic part. The result from d.c Arrhenius study shows that electro-thermal activation energy decreases with increasing acid concentration leading to enhancement of electronic conductivity of the complex. The result of UV-VIS study confirms the formation of the acid complex of Gum Arabica. The nature of photo-absorption indicates very clearly that main absorption region shows gradual shifts towards longer wavelength with increase of acid concentration. The result of FTIR absorption shows the structural concepts of electro-activity and complex formation indication of pure Gum Arabica. The overall analysis shows that the electro-activity of the mentioned biopolymer may be tailored.

  11. Carboxy methylation of cashew nut tree exudate gum

    International Nuclear Information System (INIS)

    Silva, Durcilene A. da; Paula, Regina C.M.

    2001-01-01

    Anacardium occidentale exudate polysaccharide was carboxymethylated with monochloroacetic acid. The samples were characterized by NMR, solution viscometry, GPC and thermal analysis. Carboxymethylated cashew gum (CMGC) with a degree of substitution between 0,1-0,16 was obtained. Solution viscometry and GPC analysis showed that polymer molar mass degradation occurred. Sample with higher DS shows higher peak molar mass, intrinsic viscosity and thermal stability. NMR spectrum indicated that the carboxy methylation reaction occurs preferentially in C-6 of galactose residue. (author)

  12. Cryoextraction: A novel approach to remove aspirated chewing gum

    Directory of Open Access Journals (Sweden)

    Edmundo Rubio

    2013-01-01

    Full Text Available The extraction of aspirated foreign bodies can prove challenging at times, requiring even rigid bronchoscopy. Cryotherapy probes have been reported to help with extraction of foreign bodies. We present a case where successful "cryoextraction" was performed on an aspirated chewing gum. The case highlights the fact that this technique is useful to extract all materials that have water content. This technique can be performed through flexible bronchoscopy and can save patients from more aggressive approaches.

  13. Chewing gum and lozenges as delivery systems for noscapine

    DEFF Research Database (Denmark)

    Norgaard Jensen, L.; Christrup, Lona Louring; Menger, N.

    1991-01-01

    base. The release characteristics of the preparations were evaluated both in vitro and in vivo, and their taste properties examined. Only the formulations containing noscapine base were without any appreciable taste. Chewing gum containing this compound showed, however, a low level of drug release both...... in vitro and in vivo and is therefore not a suitable dosage form. Only a lozenge formulation containing noscapine base fulfilled the requirements of taste acceptability and adequate release properties....

  14. Preparation and characterization of tragacanth-locust bean gum edible blend films.

    Science.gov (United States)

    Mostafavi, Fatemeh Sadat; Kadkhodaee, Rassoul; Emadzadeh, Bahareh; Koocheki, Arash

    2016-03-30

    The present work introduces the structure and physicomechanical properties of a novel blend film made from binary solutions of gum tragacanth (GT) and locust bean gum (LBG) at different mixing ratios. Apparent viscosities and surface tensions of individual and blend gum solutions were also investigated. The viscosity data indicated that there was a distinct synergism between the two gums at all mixing ratios. FTIR spectra showed the existence of noncovalent intermolecular interactions between gums. The surface tensions of binary solutions were significantly lower than those of individual gums which is advantageous for coating applications. All films had homogenous and smooth surface morphology and their transparency, water vapour barrier and mechanical properties were improved by incorporating LBG in blend. The results of this study suggest that GT-LBG blend film, owing to its desirable properties, has the potential to be used as a new degradable food packaging material. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Chemical and Functional Properties of Chia Seed (Salvia hispanica L.) Gum

    Science.gov (United States)

    Segura-Campos, Maira Rubi; Ciau-Solís, Norma; Rosado-Rubio, Gabriel; Chel-Guerrero, Luis; Betancur-Ancona, David

    2014-01-01

    Chia (Salvia hispanica L.) constitutes a potential alternative raw material and ingredient in food industry applications due to its dietary fiber content. Gum can be extracted from its dietary fiber fractions for use as an additive to control viscosity, stability, texture, and consistency in food systems. The gum extracted from chia seeds was characterized to determine their quality and potential as functional food additives. The extracted chia gum contained 26.2% fat and a portion was submitted to fat extraction, producing two fractions: gum with fat (FCG) and gum partly defatted (PDCG). Proximal composition and physicochemical characterization showed these fractions to be different (P pseudoplastic type. PDCG had more viscosity than FCG. Chia seed is an excellent natural source of gum with good physicochemical and functional qualities, and is very promising for use in food industry. PMID:26904622

  16. Efficacy of baking soda-containing chewing gum in removing natural tooth stain.

    Science.gov (United States)

    Mankodi, S M; Conforti, N; Berkowitz, H

    2001-07-01

    A 14-week, double-blind, randomized clinical trial was conducted with 126 healthy volunteers to compare the efficacy of twice-daily use of 3 baking soda-containing chewing gums in removing natural tooth stain when used in conjunction with a program of regular oral hygiene. All 3 chewing gums significantly reduced extrinsic stain (P Baking Soda Gum (AHDC) reduced dental stain by 70.8%, compared to reductions of 71.9% and 65.3%, after use of 2 experimental gum formulations. Whitened appearance improved by 1.73 shade tabs using AHDC gum, and up to 2.49 shade tabs with the experimental formulations. These results suggest that the use of baking soda-containing gum after meals, in conjunction with good oral hygiene, can improve both extrinsic dental staining and the whitened appearance of teeth.

  17. An insight into the emerging exopolysaccharide gellan gum as a novel polymer.

    Science.gov (United States)

    Prajapati, Vipul D; Jani, Girish K; Zala, Bhumi S; Khutliwala, Tohra A

    2013-04-02

    The microbial exopolysaccharides are water-soluble polymers secreted by microorganisms during fermentation. The biopolymer gellan gum is a relatively recent addition to the family of microbial polysaccharides that is gaining much importance in food, pharmaceutical and chemical industries due to its novel properties. It is commercially produced by C.P. Kelco in Japan and the USA. This article presents a critical review of the available information on the gum synthesized by Sphingomonas paucimobilis with special emphasis on its fermentative production. Factors affecting the fermentative production of gellan gum and problems associated with mass transfer have been addressed. Classification and trade names of gellan gum has been specified. Characteristics of gellan gum with respect to its structure, physicochemical properties are discussed. An attempt has also been made to review the current and potential applications of gellan gum in food, pharmaceutical and other industries. Copyright © 2013 Elsevier Ltd. All rights reserved.

  18. Influence of tragacanth gum in egg white based bioplastics: Thermomechanical and water uptake properties.

    Science.gov (United States)

    López-Castejón, María Luisa; Bengoechea, Carlos; García-Morales, Moisés; Martínez, Inmaculada

    2016-11-05

    This study aims to extend the range of applications of tragacanth gum by studying its incorporation into bioplastics formulation, exploring the influence that different gum contents (0-20wt.%) exert over the thermomechanical and water uptake properties of bioplastics based on egg white albumen protein (EW). The effect of plasticizer nature was also evaluated through the modification of the water/glycerol ratio within the plasticizer fraction (fixed at 40wt.%). The addition of tragacanth gum generally yielded an enhancement of the water uptake capacity, being doubled at the highest content. Conversely, presence of tragacanth gum resulted in a considerable decrease in the bioplastic mechanical properties: both tensile strength and maximum elongation were reduced up to 75% approximately when compared to the gum-free system. Ageing of selected samples was also studied, revealing an important effect of storage time when tragacanth gum is present, possibly due to its hydrophilic character. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. THE MORPHOLOGY OF THE GUM AND OF THE DESMODONTIUM

    Directory of Open Access Journals (Sweden)

    M. NICULESCU

    2003-01-01

    Full Text Available The gum and the desmodontium are constituent parts of the morpho-functional complex of the parodontium. Depending on its topographic situation, we can describe three portions of the gum: alveolar, marginal and interdental, each one having its features. Within the gum, the collagen fibres from the subepihtelial net are grouped in alveologingival, dentogingival, circular and interdental, the last ones being seen by us as a single group, called peridental fibres. The desmodontium or the alveolodental ligament or the parodontal ligament makes the relation between the alveolar bone and the radicular cement within the dentoalveolar articulation, articulation known under the name of gomphosis, a syndesmose that does not allow any movement to the tooth. Depending on their topographic situation, the collagen fibres in the constitution of the alveolodental ligament, also called cemento-alveolar fibres, can be divided in marginal, intermediary and apical. The alveolodental ligament has the important role in the transmission of the chewing forces to the resistance structures within the functional architectonics of the cranium.

  20. Long-term effects of guar gum on blood lipids.

    Science.gov (United States)

    McIvor, M E; Cummings, C C; Van Duyn, M A; Leo, T A; Margolis, S; Behall, K M; Michnowski, J E; Mendeloff, A I

    1986-04-01

    While guar gum has been shown to lower total cholesterol and low density lipoprotein cholesterol (LDL-C) in diabetic patients over the short-term, the long-term effects are less well studied and may be unpredictable. Granola bars with and without 6.6 g guar gum were developed and fed to 16 adult volunteers with Type II diabetes mellitus who had been randomized in a double-blind fashion into guar and placebo groups of equal size. Four to six bars were consumed daily with an ad lib diet over a 6-month period. Total cholesterol, total high density lipoprotein cholesterol (HDL-C), subfractions HDL2-C and HDL3-C, LDL-C, and beta-apoprotein were measured at 0 and 6 months. Although LDL-C was lower and triglycerides higher at 6 months than at baseline, these changes were of equal magnitude and direction in both guar and placebo groups. Using each subject as his own control, only the change in triglycerides was statistically significant (P less than 0.025). When male subjects alone were analyzed, the guar group showed a statistically significant decrease in LDL, while the placebo group did not. Other lipid parameters were not significantly changed during the study, despite a positive effect on carbohydrate metabolism from the guar bars. The data suggest either that the hypolipemic effects of guar gum in patients with Type II diabetes mellitus are not sustained for 6 months, or the effects occur only in men.

  1. FORMULATION OF ACECLOFENAC SUSTAINED RELEASE MATRIX TABLET USING HYDROPHILIC NATURAL GUM

    OpenAIRE

    Parasuram Rajam Radhika; Pankaj R. Kharkate; Thangavel Sivakumar

    2011-01-01

    In order to reduce production costs, a simple, direct compression sustained release formulation consisting of drug Aceclofenac and by using hydrophilic polymer guar gum and tamarind gum as the release modifier was investigated. No interaction between drug and polymer was confirmed by FTIR, which shows the suitability of all excipients with the drug to formulate the sustained release matrix tablets. Five batches of sustained release matrix tablets of Aceclofenac with both guar gum and tamarind...

  2. Effects of Chewing Different Flavored Gums on Salivary Flow Rate and pH

    Directory of Open Access Journals (Sweden)

    Maryam Karami Nogourani

    2012-01-01

    Full Text Available Chewing gum increases salivary flow rate (SFR and pH, but differences in preferences of gum flavor may influence SFR and pH. The aim of this paper was to assess the effect of five different flavors of sucrose-free chewing gum on the salivary flow rate and pH in healthy dental students in Isfahan, Iran. Fifteen (7 men and 8 women healthy dental student volunteers collected unstimulated saliva and then chewed one of five flavored gums for 6 min. The whole saliva was collected and assessed for 6 consecutive days. After unstimulated saliva was collected, stimulated saliva was collected at interval of 0-1, 1–3, and 3–6 minutes after the start of different flavored chewing gums. The SFR and salivary pH were measured. The SFR increased in all five flavored gums at 1, 3, and 6 minutes after start of chewing gums (<0.001. The flow rate of all products reached peak in the 1st minute of stimulation, except spearmint-flavored gums which reached peak in the 6th minute. In the 1st minute, the strawberry-flavored gums showed the highest SFR. During 1–3 minutes, strawberry- and apple-flavored gums showed higher SFR, respectively. Only the spearmint- and cinnamon-flavored gum significantly increased salivary pH. Gum flavored can affect the SFR and pH and special flavors can be advised for different individuals according to their oral conditions.

  3. Chemical and Functional Properties of Chia Seed (Salvia hispanica L.) Gum

    OpenAIRE

    Segura-Campos, Maira Rubi; Ciau-Sol?s, Norma; Rosado-Rubio, Gabriel; Chel-Guerrero, Luis; Betancur-Ancona, David

    2014-01-01

    Chia (Salvia hispanica L.) constitutes a potential alternative raw material and ingredient in food industry applications due to its dietary fiber content. Gum can be extracted from its dietary fiber fractions for use as an additive to control viscosity, stability, texture, and consistency in food systems. The gum extracted from chia seeds was characterized to determine their quality and potential as functional food additives. The extracted chia gum contained 26.2% fat and a portion was submit...

  4. Composición química de tres maderas en la provincia de Pinar del Río, Cuba a tres alturas del fuste comercial. Parte Nº 1: Corymbia citriodora

    Directory of Open Access Journals (Sweden)

    L. R. Carballo Abreu

    2004-01-01

    Full Text Available Se estudió la composición química de la madera de Corymbia citriodora, a tres alturas del fuste comercial, las muestras fueron tomadas de la Empresa Forestal de Macurijes, en la provincia de Pinar del Río, Cuba, y analizadas empleando las Normas TAPPI. Se estudió mediante Calorimetría Diferencial de Barrido (DSC la celulosa de esta madera y la lignina mediante espectroscopia IR. Los resultados demuestran diferencias con la altura del fuste, disminuyendo los contenidos de sustancias extraíbles y ligninas con la altura del mismo. Los datos de la espectroscopia IR demostraron la presencia de ligninas del tipo siringil-guaiacílica y diferencias estructurales con la altura del árbol. La banda del espectro de absorción IR correspondiente a la región de 1500 cm–1, explica las variaciones de los porcentajes de lignina con la altura, lo cual evidencia que en la parte superior del árbol esta lignina es menos reticulada y sugiere menor grado de polimerización de las unidades monoméricas que la componen. El comportamiento térmico de la celulosa de madera muestra señales más agudas en la parte superior del fuste con variaciones de entalpías mayores, sugiriendo variabilidad estructural de la celulosa con la altura del fuste comercial.

  5. Single-Dose and Multiple-Dose Pharmacokinetics of Nicotine 6 mg Gum.

    Science.gov (United States)

    Hansson, Anna; Rasmussen, Thomas; Kraiczi, Holger

    2017-04-01

    Under-dosing is a recognized problem with current nicotine replacement therapy (NRT). Therefore, a new 6mg nicotine gum has been developed. To compare the nicotine uptake from the 6mg gum versus currently available NRT products, two pharmacokinetic studies were performed. In one randomized crossover study, 44 healthy adult smokers received single doses of 6, 4, and 2mg nicotine gum, and 4mg nicotine lozenge on separate occasions. In a separate randomized crossover multiple-dose study over 11 hours, 50 healthy adult smokers received one 6mg gum every hour and 90 minutes, respectively, one 4mg gum every hour, and one 4mg lozenge every hour. In both studies, blood samples were collected over 12 hours to determine single-dose and multiple-dose pharmacokinetic variables. In the single-dose study, the amount of nicotine released from the 2, 4, and 6mg gums (1.44, 3.36, and 4.94mg) as well as the resulting maximum concentration and area under the curve (5.9, 10.1, and 13.8ng/mL, and 17.1, 30.7, 46.2ng/mL × h, respectively) increased with dose. The maximum concentration and area under the curve of the 6mg gum were 44% and 30% greater, respectively, than those for 4mg lozenge. Upon hourly administration, the steady-state average plasma nicotine concentration with 6mg gum (37.4ng/mL) was significantly higher than those for 4mg lozenge (28.3ng/mL) and 4mg gum (27.1ng/mL). Nicotine delivery via the 6mg gum results in higher plasma nicotine concentrations after a single dose and at steady state than with currently available oral NRT. Under-dosing is a recognized problem with current NRT. Therefore, a new 6mg nicotine gum has been developed. Our studies show that upon single-dose and multiple-dose administration, the 6mg gum releases and delivers more nicotine to the systemic circulation than 2mg gum, 4mg gum, and 4mg lozenge. Thus, each 6mg nicotine gum provides a higher degree of nicotine substitution and/or lasts for a longer period of time than currently available nicotine

  6. Fabrication of electrospun almond gum/PVA nanofibers as a thermostable delivery system for vanillin.

    Science.gov (United States)

    Rezaei, Atefe; Tavanai, Hossein; Nasirpour, Ali

    2016-10-01

    In this study, the fabrication of vanillin incorporated almond gum/polyvinyl alcohol (PVA) nanofibers through electrospinning has been investigated. Electrospinning of only almond gum was proved impossible. It was found that the aqueous solution of almond gum/PVA (80:20, concentration=7% (w/w)) containing 3% (w/w) vanillin could have successfully electrospun to uniform nanofibers with diameters as low as 77nm. According to the thermal analysis, incorporated vanillin in almond gum/PVA nanofibers showed higher thermal stability than free vanillin, making this composite especially suitable for high temperature applications. XRD and FTIR analyses proved the presence of vanillin in the almond gum/PVA nanofibers. It was also found that vanillin was dispersed as big crystallites in the matrix of almond gum/PVA nanofibers. FTIR analysis showed almond gum and PVA had chemical cross-linking by etheric bonds between COH groups of almond gum and OH groups of PVA. Also, in the nanofibers, there were no major interaction between vanillin and either almond gum or PVA. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. The development of a simple objective test of mastication suitable for older people, using chewing gums.

    Science.gov (United States)

    Anastassiadou, V; Heath, M R

    2001-12-01

    To develop and assess a simple test for evaluating the mastication of visco-elastic foods and prosthodontic success subsequent to treatment of older people. The weight lost from chewing gum during mastication tests and the saliva secreted is weighed. The percentage of the original gum weight that is chewed out in a defined number of strokes is termed the Masticatory Effectiveness (ME) MATERIAL: Five edentate and three dentate volunteers were selected to provide a range of dental states and age. Four commercially available chewing gums of different origins and perceived hardness were tested, one without sweetener acted as a control for salivary stimulation. Pre-weighed samples of each gum were chewed, each for defined numbers of strokes. The saliva secreted was collected and weighed. The chewed gum was desiccated and the total weight loss of sweeteners chewed out provided an objective measure of chewing performance. Weight loss showed large differences between gums, between subjects and the number of strokes. ME was significantly correlated with salivary secretion rates for two subjects. The interaction between subject and gum was statistically significant, established by an ANOVA model, the value of which is shown for multivariate studies. Differential success between gums of different thickness may provide evaluation of denture stability. Measuring the weight lost from gums during chewing provides a simple test of masticatory effectiveness of visco-elastic foods. This has particular value both in functional assessment of older people and in physiological research.

  8. Compositional analysis and rheological characterization of gum tragacanth exudates from six species of Iranian Astragalus

    DEFF Research Database (Denmark)

    Balaghi, Sima; Mohammadifar, Mohammad Amin; Zargaraan, Azizollaah

    2011-01-01

    The sugar composition and viscoelastic behaviour of Iranian gum tragacanth exuded by six species of Astragalus was investigated at a concentration of 1.3% and varying ionic strength using a controlled shear-rate rheometer. Compositional analysis of the six species of gum tragacanth by high......-performance anion-exchange chromatography with pulsed amperometric detection suggested the occurrence of arabinose, xylose, glucose, galactose, fucose, rhamnose and galacturonic acid residues in the gum structure; however, the proportions of each sugar varied significantly among the gums from the different species...

  9. Whole and crushed nutlets of chia (Salvia hispanica from Mexico as a source of functional gums

    Directory of Open Access Journals (Sweden)

    Maira Segura-Campos

    2014-12-01

    Full Text Available The objective of this study was to characterize the chemical and functional properties of Mexican chia (Salvia hispanica gums extracted from defatted whole and crushed nutlets using the Soxhlet and SFE-CO2 methods. Chia gums have interesting chemical and functional properties for the food industry. The oil and gum yields were in the range of 1.98-16.42% and 5.81-12.60%, respectively. The defatting procedure did not affect significantly the oil and gum extraction; the nutlet type (whole or crushed was the only parameter influencing the yield. The proximate composition and the protein and fiber contents of chia gum were evaluated. Low contents of protein and fiber and high NFE levels were found in whole nutlet gums. The functional properties of chia gum extracted from whole and crushed nutlets with the Soxhlet and SFE-COs methods showed the following ranges of water absorption capacity of 62.64 to 143.66 g/g, water adsorption capacity of 0.69 to 1.35 g/g, and water and oil holding capacity of 100 to 149.28 g/g and19.5 to 40.4 g/g, respectively. The rheological behavior exhibited by the gums was pseudoplastic or shear thinning. From a functional perspective, chia gum is an important food component due its emulsifier and stabilizer potentials.

  10. Chemical and Physical Properties, Safety and Application of Partially Hydrolized Guar Gum as Dietary Fiber

    OpenAIRE

    Yoon, Seon-Joo; Chu, Djong-Chi; Raj Juneja, Lekh

    2007-01-01

    The ideal water-soluble dietary fiber for the fiber-enrichment of foods must be very low in viscosity, tasteless, odorless, and should produce clear solutions in beverages. Partially hydrolyzed guar gum (PHGG) produced from guar gum by enzymatic process has the same chemical structure with intact guar gum but less than one-tenth the original molecular length of guar gum, which make available to be used as film former, foam stabilizer and swelling agent. The viscosity of PHGG is about 10 mPa·s...

  11. Locust bean gum: processing, properties and food applications--a review.

    Science.gov (United States)

    Barak, Sheweta; Mudgil, Deepak

    2014-05-01

    Locust bean gum or carob gum is a galactomannan obtained from seed endosperm of carob tree i.e. Ceratonia siliqua. It is widely utilized as an additive in various industries such as food, pharmaceuticals, paper, textile, oil well drilling and cosmetics. Industrial applications of locust bean gum are due to its ability to form hydrogen bonding with water molecule. It is also beneficial in the control of many health problems like diabetes, bowel movements, heart disease and colon cancer due to its dietary fiber action. This article focuses on production, processing, composition, properties, food applications and health benefits of locust bean gum. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. Spot Welding of Honeycomb Structures

    Science.gov (United States)

    Cohal, V.

    2017-08-01

    Honeycomb structures are used to prepare meals water jet cutting machines for textile. These honeycomb structures are made of stainless steel sheet thickness of 0.1-0.2 mm. Corrugated sheet metal strips are between two gears with special tooth profile. Hexagonal cells for obtaining these strips are welded points between them. Spot welding device is three electrodes in the upper part, which carries three welding points across the width of the strip of corrugated sheet metal. Spot welding device filled with press and advance mechanisms. The paper presents the values of the regime for spot welding.

  13. Production and characterization of the polysaccharide ''xanthan gum ...

    African Journals Online (AJOL)

    use

    2011-11-23

    Nov 23, 2011 ... spots of these sugars coincided with spots of standard glucose, mannose and glucouronic acid. Also, thin layer chromatography analysis of acetic and pyruvic acids showed the presence of these two acids (Figure 1b). The results of chemical composition of xanthan produced by. X. campestris.

  14. The release of vitamin C from chewing gum and its effects on supragingival calculus formation.

    Science.gov (United States)

    Lingström, Peter; Fure, Solveig; Dinitzen, Bettina; Fritzne, Christina; Klefbom, Carin; Birkhed, Dowen

    2005-02-01

    The aims of this study were to evaluate (i): whether vitamin C in chewing gum, alone or in combination with carbamide, influences calculus formation, and (ii) whether carbamide affects the release, stability and uptake of vitamin C in a chewing gum. In two test series (Series I and II), 30 subjects, all calculus formers, participated. They were instructed to chew on five (Series I) or 10 (Series II) pieces of gum per day for a period of 3 months. The chewing gums were: vitamin C (60 mg, Series I), non-vitamin C (Series I) and vitamin C + carbamide (30 mg + 30 mg, Series II). In both series, no gum was used as a negative control. Calculus formation was scored on three lingual sites on the six anterior mandibular teeth according to the Volpe-Manhold index. The effect on plaque and gingivitis was also determined. A significant reduction in the total calculus score was observed after the use of vitamin C (33%) and vitamin C + carbamide (12%) gums compared with no gum use; this reduction was most pronounced in the heavy calculus formers. A reduced amount of visible plaque was also observed after use of vitamin C and non-vitamin C gum, but only the vitamin C gum reduced the number of bleeding sites (37%). In a separate study, the release, stability and uptake of vitamin C were evaluated using the iodine titration method in both saliva and urine after exposure to the following gums: vitamin C + carbamide (30 mg + 30 mg) and vitamin C (30 mg). There was no indication that carbamide affected the release, stability or uptake of vitamin C when used in a chewing gum.

  15. Manilkara zapota (Linn.) Seeds: A Potential Source of Natural Gum.

    Science.gov (United States)

    Singh, Sudarshan; Bothara, Sunil B

    2014-01-01

    Mucilage isolated from seeds of Manilkara zapota (Linn.) P. Royen syn. is a plant growing naturally in the forests of India. This mucilage is yet to be commercially exploited, and characterized as polymer. Various physicochemical methods like particle size analysis, scanning electron microscopy, thermal analysis, gel permeation chromatography, X-ray diffraction spectrometry, zeta potential, Fourier transform infrared spectroscopy, and nuclear magnetic resonance spectroscopy have been employed to characterize this gum in the present study. Particle size analyses suggest that mucilage has particle size in nanometer. Scanning electron microscopy analysis suggests that the mucilage has irregular particle size. The glass transition temperature of the gum was observed to be 138°C and 136°C by differential scanning calorimetry and differential thermal analysis, respectively. The thermogravimetric analysis suggested that mucilage had good thermal stability. The average molecular weight of mucilage was determined to be 379180, by gel permeation chromatography, while the viscosity of mucilage was observed to be 219.1 cP. The X-ray diffraction spectrometry pattern of the mucilage indicates a completely amorphous structure. Elemental analysis of the gum revealed the contents of carbon, hydrogen, nitrogen, and sulfur to be 80.9 (%), 10.1 (%), 1.58 (%), and 512 (mg/kg), respectively. Mucilage had specific content of calcium, magnesium, potassium, lower concentrations of aluminum, cadmium, cobalt, lead, and nickel. The major functional groups identified from FT-IR spectrum include 3441 cm(-1) (-OH), 1660 cm(-1) (Alkenyl C-H & C=C Stretch), 1632 cm(-1) (-COO-), 1414 cm(-1) (-COO-), and 1219 cm(-1) (-CH3CO). Analysis of mucilage by paper chromatography and 1D NMR, indicated the presence of rhamnose, xylose, arabinose, mannose, and fructose.

  16. 9 CFR 149.4 - Spot audit.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Spot audit. 149.4 Section 149.4... LIVESTOCK IMPROVEMENT VOLUNTARY TRICHINAE CERTIFICATION PROGRAM § 149.4 Spot audit. (a) In addition to regularly scheduled site audits, certified production sites will be subject to spot audits. (1) Random spot...

  17. Vegetation status and socio-economic importance of gum and resin ...

    African Journals Online (AJOL)

    Ethiopian Journal of Biological Sciences ... Abstract. Study on population status, socio-economic importance and threats of gum- and resin-producing plant species was made in Borena, South Wollo, (Ethiopia). ... A total of 14 gum- and resin-bearing plant species representing seven families were recorded. Five of them ...

  18. Analysis of a gum from the exudates of Dichrostachys cinerea (L ...

    African Journals Online (AJOL)

    Jane

    2011-07-06

    Jul 6, 2011 ... This study was aimed to investigate the rheological properties, and the moisture and ash contents of the isolated gum resins ... These also play a collateral role to raise cost on health service. One solution to this ... The demulcent properties of Gum Arabic are employed in various cough, diarrhoea and throat ...

  19. Adverse Reaction to Nicotine Gum in Malay Female Smoker: A Case Report

    Science.gov (United States)

    Noorzurani, Md Haris Robson; Bond, Alyson; Wolff, Kim

    2008-01-01

    Nicotine replacement therapies (NRT) are prescribed in smoking cessation programmes to help smokers stop smoking. The ideal dosage of NRT should control cravings and withdrawal symptoms but avoid adverse reactions. This report describes a case of adverse reaction to nicotine gum in a female Malay smoker. Assays taken 2 h after the gum, showed that…

  20. Economic analysis of deforestation : the case of the gum Arabic belt in Sudan

    NARCIS (Netherlands)

    Rahim, A.

    2006-01-01

    Keywords: Gum Arabic; Deforestation; Entry and Exit; Real options Drought; Socio-economic, Oligopoly; Interdependent markets; Stackelberg.The gum arabic belt inSudanoffered in the past an

  1. Effect of chewing gum use on oral hygiene and volatile sulphur ...

    African Journals Online (AJOL)

    Chewing of gum has been favoured by many people because of its beneficial effects. The objective of this study was therefore to determine the difference between the oral hygiene status, organoleptic assessment, self perception of malodour as well as the mouth- air volatile sulphur compound concentration of chewing gum ...

  2. Unveiling the Sources of Chromium in Pictorialist Photographs: Gum-Dichromate Process or Paper Sizing?

    DEFF Research Database (Denmark)

    Vila, Anna; Centeno, Silvia A; Kennedy, Nora W

    2015-01-01

    For this issue of Hand Papermaking devoted to paper sizing, we offer a review and extension of pertinent results obtained in our investigations of the gum-dichromate photographic process, commonly known as the gum-bichromate process.1 We have published three articles to date on our findings; this...

  3. Protein-free cress seed (Lepidium sativum) gum: Physicochemical characterization and rheological properties

    DEFF Research Database (Denmark)

    Razmkhah, Somayeh; Razavi, Seyed Mohammad Ali; Mohammadifar, Mohammad Amin

    2016-01-01

    Protein-free cress seed gum (PFCSG) was obtained by precipitation of crude cress seed gum (CSG) withethanol followed by treatment with protease. Molecular weight, moisture, ash and uronic acids contentdecreased after elimination of protein. Elimination of protein improved significantly rheologica...

  4. In situ effect of CPP-ACP chewing gum upon erosive enamel loss

    Directory of Open Access Journals (Sweden)

    Catarina Ribeiro Barros de ALENCAR

    Full Text Available Abstract Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP is able to increase salivary calcium and phosphate levels at an acidic pH. Previous studies demonstrated that a CPP-ACP chewing gum was able to enhance the re-hardening of erosion lesions, but could not diminish enamel hardness loss. Therefore, there is no consensus regarding the effectiveness of CPP-ACP on dental erosion. Objective This in situ study investigated the ability of a CPP-ACP chewing gum in preventing erosive enamel loss. Material and Methods: During three experimental crossover phases (one phase per group of seven days each, eight volunteers wore palatal devices with human enamel blocks. The groups were: GI – Sugar free chewing gum with CPP-ACP; GII – Conventional sugar free chewing gum; and GIII – No chewing gum (control. Erosive challenge was extraorally performed by immersion of the enamel blocks in cola drink (5 min, 4x/day. After each challenge, in groups CPP and No CPP, volunteers chewed one unit of the corresponding chewing gum for 30 minutes. Quantitative analysis of enamel loss was performed by profilometry (µm. Data were analyzed by Repeated-Measures ANOVA and Tukey’s test (p0.05. Conclusion The CPP-ACP chewing gum was not able to enhance the anti-erosive effect of conventional chewing gum against enamel loss.

  5. A systematic review of the efficacy of gum chewing for the amelioration of postoperative ileus

    NARCIS (Netherlands)

    de Castro, S. M. M.; van den Esschert, J. W.; van Heek, N. T.; Dalhuisen, S.; Koelemay, M. J. W.; Busch, O. R. C.; Gouma, D. J.

    2008-01-01

    BACKGROUND: Recent trials have shown promising results for the efficacy of gum chewing for the amelioration of postoperative ileus. This finding could have a major clinical impact since gum chewing is relatively harmless and cheap while postoperative ileus has a significant impact on healthcare.

  6. Intra-species variation of the properties of gum exudates from Acacia ...

    African Journals Online (AJOL)

    Gum exudates from Acacia senegal var. senegal and Acacia seyal var. fistula from Tanzania have been analyzed and their inter- and intra-species variation of their properties evaluated. The results show that significant inter-species variation of the properties of the gum exudates from the two species exist, whereas only ...

  7. Investigation of the effect of zinc oxide-modified gum Arabic on polar ...

    African Journals Online (AJOL)

    Gum Arabic solution, a water-based adhesive, was modified with zinc oxide filler and the formulation was applied on wood, ceramic, glass and textile substrates. A strip of paper was used as a common adherent to all the substrates. Zinc oxide increased the viscosity of 30wt% gum Arabic solution and increased bond ...

  8. intra-species variation of the properties of gum exudates from acacia ...

    African Journals Online (AJOL)

    a

    senegal e.g. A senegal var. leiorhachis which may also find their way into commercial gum arabic shipments may have solution properties which vary significantly from the main species. This paper presents the intra-species variation of the properties of gum exudates from Acacia senegal var. senegal and A. seyal var. fistula ...

  9. Relative bioavailability of methadone hydrochloride administered in chewing gum and tablets

    DEFF Research Database (Denmark)

    Christrup, Lona Louring; Angelo, H.R.; Bonde, J.

    1990-01-01

    Methadone administered in chewing gum in doses of 16.7-22.6 mg to seven patients in a study using an open balanced cross-over design, was compared with 20 mg of methadone given perorally as tablets. There was no significant difference in the AUC/D obtained after administration of chewing gum...

  10. Gas chromatographic-mass spectrometric characterisation of plant gums in samples from painted works of art.

    Science.gov (United States)

    Bonaduce, Ilaria; Brecoulaki, Hariclia; Colombini, Maria Perla; Lluveras, Anna; Restivo, Vincenzo; Ribechini, Erika

    2007-12-21

    This paper presents an analytical GC-MS procedure to study the chemical composition of plant gums, determining aldoses and uronic acids in one step. The procedure is based on the silylation of aldoses and uronic acids, released from plant gums by microwave assisted hydrolysis, and previously converted into the corresponding diethyl-dithioacetals and diethyl-dithioacetal lactones. Using this method only one peak for each compound is obtained, thus providing simple and highly reproducible chromatograms. The analytical procedure was optimised using reference samples of raw plant gums (arabic, karaya, ghatti, guar, locust bean and tragacanth, cherry, plum and peach gums), commercial watercolours and paint layers prepared according to ancient recipes at the Opificio delle Pietre Dure of Florence (Italy). To identify gum media in samples of unknown composition, a decisional schema for the gum identification and the principal component analysis of the relative sugar percentage contents were employed. The procedure was used to study samples collected from wall paintings from Macedonian tombs (4th-3rd centuries bc) and from the Mycenaean "Palace of Nestor" (13th century bc) in Pylos, Greece. The presence of carbohydrates was ascertained and plant gum binders (fruit and a mixture of tragacanth and fruit tree gums) were identified in some of the samples.

  11. Market-driven production with transaction costs outlook: Gum arabic collection systems in Senegal

    NARCIS (Netherlands)

    Mujawamariya, G.; Burger, C.P.J.; Haese, D' M.F.C.

    2015-01-01

    Low returns from marketing of non-timber forest products such as gum arabic restrict the collection of these products. A hypothesis is tested that access to good markets motivates collectors to harvest and market gum arabic. Analyses of the choice of participation in group marketing, sale price,

  12. Effect of Guar Gum with Sorbitol Coating on the Properties and Oil Absorption of French Fries

    Directory of Open Access Journals (Sweden)

    Bo Jia

    2017-12-01

    Full Text Available This paper investigated the effects of guar gum with sorbitol coating on the oil absorption of French fries by combined dye oil methods, confocal laser scanning microscopy (CLSM and scanning electron microscopy (SEM. The results showed that pretreatment of blanching with calcium ions and coating with guar gum and sorbitol could significantly reduce the structural oil (STO and penetrated surface oil (PSO of French fries and have no negative effects on its texture and also effectively control the final moisture content (p < 0.05. Compared with control or samples coated with guar gum (blanching with or without calcium ions, the total oil (TO of French fries with guar gum and sorbitol reduced by 50.8%, 33.1% and 30.6%, respectively. CLSM photographs confirmed that STO significantly reduced after coating with guar gum and sorbitol, followed by PSO. In the process of frying, the coatings of guar gum or guar gum with sorbitol could effectively prevent oil from infiltrating the potato tissue, which can be seen in the SEM photographs. The barrier properties of French fries were enhanced by coating guar gum, and sorbitol was added to avoid pores and cracks. Blanching with calcium ion can significantly reduce the final moisture content of coating French fries.

  13. An assessment of the soil-conditioning capacity of gums exuded by ...

    African Journals Online (AJOL)

    This study assesses the soil conditioning capacity of tree gums based on the level of resistance to crumble posed by moulds of treated soils to the impacts of artificial raindrops. Gums exuded by trees viz., Acacia occidental and Parkia bicolor as well as a sample of poly(vinyl) alcohol (PVA) were used as soil conditioners.

  14. Gum bleeding as a symptom of disease: are Nigerian mothers aware?

    African Journals Online (AJOL)

    %) did not know the probable causes of gum bleeding and of the remaining 277, only 61(13.1%) and 42 (9.1%) ascribed the cause to poor oral hygiene and bacteria respectively. Majority of them had wrong perceptions about gum bleeding.

  15. Estimative of relative stiffness of the exudate gum polysaccharides

    International Nuclear Information System (INIS)

    Oliveira, Marilia A.; Paula, Regina C.M.

    2001-01-01

    The Smidsrod empirical stiffness parameter (B) of A. occidentale and A. lebbeck gum were determined using the correlation of intrinsic viscosity [η] with ionic strength. The B value of 0.204 and 0.193 found respectively for A. occidentale and A. lebbeck suggests a flexible the molecule. The ionic strength has a greater influence on the [η]. The decrease of [η] increase of I, from 0.01 M to 0.1 M of NaCl, is higher for A. lebbeck (89%) than for A. occidentale (19%). (author)

  16. The mechanism of strength and deformation in Gum Metal

    International Nuclear Information System (INIS)

    Furuta, T.; Kuramoto, S.; Morris, J.W.; Nagasako, N.; Withey, E.; Chrzan, D.C.

    2013-01-01

    Gum Metal” refers to β-Ti alloys that achieve exceptional elastic elongation and, with a specific alloy composition, appear to deform via a dislocation-free mechanism involving elastic instability at the limit of strength. This paper describes the current status of research on its strength, deformation mechanism and the possible role of stress-induced martensite. The theoretical basis for deformation at ideal strength is presented. The relevant experimental data is then discussed, including ex situ nanoindentation behavior and in situ pillar compression observed by transmission electron microscopy

  17. On the origin of delta spots

    International Nuclear Information System (INIS)

    Tang, F.

    1983-01-01

    Mount Wilson sunspot drawings from 1966 through 1980 were used in conjunction with Hα filtergrams from Big Bear Solar Observatory to examine the origin of delta spots, spots with bipolar umbrae within one penumbra. Of the six cases we studied, five were formed by the union of non-paired spots. They are either shoved into one another by two neighboring growing bipoles or by a new spot born piggy-back style on an existing spot of opposite polarity. Proper motions of the growing spots take on curvilinear paths around one another to avoid a collision. This is the shear motion observed in delta spots (Tanaka, 1979). In the remaining case, the delta spot was formed by spots that emerged as a pair. Our findings indicate no intrinsic differences in the formation or the behavior between delta spots of normal magnetic configuration. (orig.)

  18. Potential benefits of chewing gum for the delivery of oral therapeutics and its possible role in oral healthcare

    NARCIS (Netherlands)

    Wessel, Stefan W.; van der Mei, Henny C.; Maitra, Amarnath; Dodds, Michael W. J.; Busscher, Henk J.

    2016-01-01

    Introduction: Over the years, chewing gum has developed from a candy towards an oral health-promoting nutraceutical. This review summarizes evidence for the oral health benefits of chewing gum, emphasizing identification of active ingredients in gum that facilitate prevention and removal of oral

  19. The management of xerostomia in patients on haemodialysis: comparison of artificial saliva and chewing gum.

    Science.gov (United States)

    Bots, Casper P; Brand, Henk S; Veerman, Enno C I; Valentijn-Benz, Marianne; Van Amerongen, Barbara M; Nieuw Amerongen, Arie V; Valentijn, Robert M; Vos, Pieter F; Bijlsma, Joost A; Bezemer, Pieter D; ter Wee, Piet M

    2005-04-01

    Many patients on haemodialysis (HD) therapy suffer from a dry mouth and xerostomia. This can be relieved by mechanical and gustatory stimulation or palliative care. The aim of this crossover study was to investigate the effect and preferences of a sugar-free chewing gum (Freedent White) and a xanthan gum-based artificial saliva (Xialine) in the management of xerostomia in chronic HD patients. Sixty-five HD patients participated in a 6-week crossover trial. The artificial saliva was rated significantly lower than the chewing gum for effectiveness, taste and a global assessment. No preference differences were found for gender and age, although older subjects rated the artificial saliva with a higher mark. Thirty-nine subjects (60%) preferred chewing gum, 15% (n=10) preferred the artificial saliva. Therefore, both chewing gum and artificial saliva could play an important role in the palliative care of xerostomia in HD patients.

  20. Synthesis, physico-chemical and biomedical applications of sulfated Aegle marmelos gum: Green chemistry approach

    Directory of Open Access Journals (Sweden)

    Manish Jindal

    2017-05-01

    Full Text Available The present investigation was aimed at obtaining a sulfated derivative of gum obtained from partially ripe fruits of Aegle marmelos employing the ultrasonication technique. Elemental analysis and FTIR-ATR studies confirmed successful sulfation. The molarity of sulfuric acid exerted maximum influence on the degree of substitution followed by reaction temperature and reaction time. The sulfated derivative showed higher swelling in both acidic and alkaline pH as compared to the unmodified gum. It also possessed higher negative zeta potential, higher viscosity, work of shear, firmness, consistency, cohesiveness and index of viscosity as compared to both unmodified gum as well as sodium alginate. Sulfated derivative was superior to unmodified gum and sodium alginate in terms of antimicrobial and anticoagulant activities. The sulfated sample appears to be a potential substitute over the unmodified gum sample and sodium alginate for modulating the physicochemical properties of food and drug release dosage forms.

  1. Purification of cress seed (Lepidium sativum) gum: Physicochemical characterization and functional properties

    DEFF Research Database (Denmark)

    Razmkhah, Somayeh; Mohammadifar, Mohammad Amin; Razavi, Seyed Mohammad Ali

    2016-01-01

    The aim of the present study was to investigate the effects of different purification methods (ethanol, isopropanol and ethanol-isopropanol) on the physicochemical and functional characteristics of cress seed gum. Sugar composition and molecular weight of the samples varied significantly. All...... the purification methods reduced ash and protein content and molecular weight of cress seed gum. The main decomposition of the purified samples started above 200º C and initial decomposition temperature of the crude gum was 190.21º C. DSC thermograms of the purified gums showed two exothermic events at 257.......81-261.95 ºC and 302.46-311.57 ºC. Crude gum displayed an exothermic peak at 259.42º C. Sample I (purified using isopropanol) imparted the best surface activity among the purified samples as it had the highest protein and uronic acid contents and the lowest Mw. All the purification methods could improve...

  2. Purification of cress seed (Lepidium sativum) gum: A comprehensive rheological study

    DEFF Research Database (Denmark)

    Razmkhah, Somayeh; Razavi, Seyed Mohammad Ali; Mohammadifar, Mohammad Amin

    2016-01-01

    In this paper, the effects of different purification methods (ethanol (sample E), isopropanol (sample I) and ethanol-isopropanol (sample EI)) on intrinsic viscosity, steady and dynamic rheological properties of cress seed gum were investigated. The gum dispersions exhibited viscoelastic properties......, the storage modulus (G′) was higher than the loss modulus (G″), and mechanical spectra of the crude and purified cress seed gums were classified as weak gels. The purified samples had stronger and more elastic network structure than the crude gum (CSG) and the gel network got stronger along the series of I......, EI and E. All the gum dispersions indicated shear-thinning behavior and the viscosity of the samples followed the order of E > EI > I > CSG. Herschel-Bulkley model was the best model to describe steady shear flow behavior and Arrhenius-type model was also applied to describe the effect of temperature...

  3. Antinociceptive activity of Astragalus gummifer gum (gum tragacanth through the adrenergic system: A in vivo study in mice

    Directory of Open Access Journals (Sweden)

    Seyyed Majid Bagheri

    2015-01-01

    Full Text Available Background: In Iranian traditional medicine, gum obtained from Astragalus gummifer and some other species of Astragalus was used as analgesic agent. Objective: In this study, we investigated the antinociceptive effect of several concentrations (125, 250, and 500 μg/kg body weight of Astragalus gummifer gum (AGG on thermal and acetic acid induced pain in mice. Materials and Methods: AGG was dissolved in distillated water and injected i.p to male mice 15 minute before the onset of experiment. Writhing and hot-plate tests were applied to study the analgesic effect of AGG and compared with that of diclofenac sodium (30 mg/kg, i.p. or morphine (8 mg/kg, i.p. To investigate the mechanisms involved in antinociception, yohimbine, naloxone, glibenclamide, and theophylline were used in writhing test. These drugs were injected intraperitoneally 15 min before the administration of AGG. The number of writhes were counted in 30 minutes and analyzed. Results: AGG exhibited a significant antinociceptive effect and the most effective dose of AGG was 500 μg/kg. The most maximum possible effect (%MPE was observed (117.4% 15 min after drug administration. The %inhibition of acetic acid-induced writhing in AGG 125, 250 and 500 was 47%, 50% and 54% vs %15 of control and 66.3% of diclofenac sodium group. The antinociceptive effect induced by this gum in the writhing test was reversed by the systemic administration of yohimbine (α2 -adrenergic antagonist, but naloxone, glibenclamide, and theophylline did not reverse this effect. Conclusions: The findings of this study indicated that AGG induced its antinociceptive through the adrenergic system.

  4. Franšīzes līgums

    OpenAIRE

    Bērziņš, Artūrs

    2011-01-01

    Bakalaura darba "Franšīzes līgums" mērķis ir jaunā nacionālā tiesiskā regulējuma izpēte, tā atbilstības starptautiskajam regulējumam konstatēšana. Bakalaura darbs sastāv no četrām nodaļām, kurās tiek aplūkots franšīzes līgums un tā būtība, tā atšķirība no citiem civiltieskiem līgumiem, franšīzes attīstība Latvijā un tiesiskā regulējuma pilnveidošana Eiropas Savienības tiesiskā regulējuma ietvaros, kā arī problēmjautājumi un to risinājums. Darba autors nonāk pie secinājuma, ka nolūkā past...

  5. Laser based spot weld characterization

    Science.gov (United States)

    Jonietz, Florian; Myrach, Philipp; Rethmeier, Michael; Suwala, Hubert; Ziegler, Mathias

    2016-02-01

    Spot welding is one of the most important joining technologies, especially in the automotive industry. Hitherto, the quality of spot welded joints is tested mainly by random destructive tests. A nondestructive testing technique offers the benefit of cost reduction of the testing procedure and optimization of the fabrication process, because every joint could be examined. This would lead to a reduced number of spot welded joints, as redundancies could be avoided. In the procedure described here, the spot welded joint between two zinc-coated steel sheets (HX340LAD+Z100MB or HC340LA+ZE 50/50) is heated optically on one side. Laser radiation and flash light are used as heat sources. The melted zone, the so called "weld nugget" provides the mechanical stability of the connection, but also constitutes a thermal bridge between the sheets. Due to the better thermal contact, the spot welded joint reveals a thermal behavior different from the surrounding material, where the heat transfer between the two sheets is much lower. The difference in the transient thermal behavior is measured with time resolved thermography. Hence, the size of the thermal contact between the two sheets is determined, which is directly correlated to the size of the weld nugget, indicating the quality of the spot weld. The method performs well in transmission with laser radiation and flash light. With laser radiation, it works even in reflection geometry, thus offering the possibility of testing with just one-sided accessibility. By using heating with collimated laser radiation, not only contact-free, but also remote testing is feasible. A further convenience compared to similar thermographic approaches is the applicability on bare steel sheets without any optical coating for emissivity correction. For this purpose, a proper way of emissivity correction was established.

  6. Study of chemical and physical properties of irradiated Guar Gum

    International Nuclear Information System (INIS)

    Hussein, H. A. S.

    2012-07-01

    This study was carried out to evaluate the effect of different gamma radiation doses to decontamination of micro-organisms present in Guar Gum powder. As well as to study the effect of radiation on the chemical and physical properties of the carbohydrate components of the Gum's material. Two types of samples were used in this study (powder and liquid). All samples were collected from commercially available Guar Gum (G G), which were obtained from the company (Sudanese Guar Gum ltd). Samples putted in polyethylene tightly closed container, then irradiated by applying different doses (2.5, 5, 7.5, 10, 20,30,40,and 50 kGy) from Co-60 source at room temperature in air. And take zero kGy as control. Irradiated powder samples of (2.5, 5, 7.5, 10 kGy) were investigated for contamination by using growth media agar and the result showed that 2.5 kGy is appropriate dose to remove the contamination of the samples. And then analyzed using fourier transform infrared (FTTR) x-ray fluorescence (X RF) and spectroscopy. The FTIR spectroscopy results suggested that there were no major chemical functional group transformation during irradiation. No change occurs by using low dose as 2.5 kGy. Also evaluation impact of radiation on liquid Samples (Aqueous solutions prepared in tow concentration of 1% and 5% wv that is by exposing the samples to the same dose of gamma rays) the effect of irradiation on it were investigated by using ultra violet spectroscopy ( UV.Vis), results showed that low dose has steeply effect in solutions specially in low concentration, it was more pronoun than that in high concentration, high dose has made change similar to that it made in powder. Also for both concentrations of liquid samples and for solutions made of irradiated powder pH measured and viscosity which used in investigations of molecular weight of liquid and powder, comparing the results of impact in the form of powder with the results of effects in the solutions found that the effects of

  7. Is this Red Spot the Blue Spot (locus ceruleum)?

    Energy Technology Data Exchange (ETDEWEB)

    Choe, Won Sick; Lee, Yu Kyung; Lee, Min Kyung; Hwang, Kyung Hoon [Gachon University Gil Hospital, Incheon (Korea, Republic of)

    2010-06-15

    The authors report brain images of 18F-FDG-PET in a case of schizophrenia. The images showed strikingly increased bilateral uptake in the locus ceruleum. The locus ceruleum is called the blue spot and known to be a center of the norepinephrinergic system.

  8. Rheological characterization and drug release studies of gum exudates of Terminalia catappa Linn.

    Science.gov (United States)

    Kumar, Sadhis V; Sasmal, Dinakar; Pal, Subodh C

    2008-01-01

    The present study was undertaken to evaluate the gum exudates of Terminalia catappa Linn. (TC gum) as a release retarding excipient in oral controlled drug delivery system. The rheological properties of TC gum were studied and different formulation techniques were used to evaluate the comparative drug release characteristics. The viscosity was found to be dependent on concentration and pH. Temperature up to 60 degrees C did not show significant effect on viscosity. The rheological kinetics evaluated by power law, revealed the shear thinning behavior of the TC gum dispersion in water. Matrix tablets of TC gum were prepared with the model drug dextromethorphan hydrobromide (DH) by direct compression, wet granulation and solid dispersion techniques. The dissolution profiles of the matrix tablets were compared with the pure drug containing capsules using the USP Basket apparatus with 500 ml phosphate buffer of pH 6.8 as a dissolution medium. The drug release from the compressed tablets containing TC gum was comparatively sustained than pure drug containing capsules. Even though all the formulation techniques showed reduction of dissolution rate, aqueous wet granulation showed the maximum sustained release of more than 8 h. The release kinetics estimated by the power law revealed that the drug release mechanism involved in the dextromethorphan matrix is anomalous transport as indicated by the release exponent n values. Thus the study confirmed that the TC gum might be used in the controlled drug delivery system as a release-retarding polymer.

  9. Chewing Gum: Cognitive Performance, Mood, Well-Being, and Associated Physiology

    Directory of Open Access Journals (Sweden)

    Andrew P. Allen

    2015-01-01

    Full Text Available Recent evidence has indicated that chewing gum can enhance attention, as well as promoting well-being and work performance. Four studies (two experiments and two intervention studies examined the robustness of and mechanisms for these effects. Study 1 investigated the acute effect of gum on mood in the absence of task performance. Study 2 examined the effect of rate and force of chewing on mood and attention performance. Study 3 assessed the effects of chewing gum during one working day on well-being and performance, as well as postwork mood and cognitive performance. In Study 4, performance and well-being were reported throughout the workday and at the end of the day, and heart rate and cortisol were measured. Under experimental conditions, gum was associated with higher alertness regardless of whether performance tasks were completed and altered sustained attention. Rate of chewing and subjective force of chewing did not alter mood but had some limited effects on attention. Chewing gum during the workday was associated with higher productivity and fewer cognitive problems, raised cortisol levels in the morning, and did not affect heart rate. The results emphasise that chewing gum can attenuate reductions in alertness, suggesting that chewing gum enhances worker performance.

  10. Effect of Guar Gum with Sorbitol Coating on the Properties and Oil Absorption of French Fries.

    Science.gov (United States)

    Jia, Bo; Fan, Daming; Li, Jinwei; Duan, Zhenhua; Fan, Liuping

    2017-12-13

    This paper investigated the effects of guar gum with sorbitol coating on the oil absorption of French fries by combined dye oil methods, confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). The results showed that pretreatment of blanching with calcium ions and coating with guar gum and sorbitol could significantly reduce the structural oil (STO) and penetrated surface oil (PSO) of French fries and have no negative effects on its texture and also effectively control the final moisture content ( p French fries with guar gum and sorbitol reduced by 50.8%, 33.1% and 30.6%, respectively. CLSM photographs confirmed that STO significantly reduced after coating with guar gum and sorbitol, followed by PSO. In the process of frying, the coatings of guar gum or guar gum with sorbitol could effectively prevent oil from infiltrating the potato tissue, which can be seen in the SEM photographs. The barrier properties of French fries were enhanced by coating guar gum, and sorbitol was added to avoid pores and cracks. Blanching with calcium ion can significantly reduce the final moisture content of coating French fries.

  11. Chemical and Functional Properties of Chia Seed (Salvia hispanica L.) Gum.

    Science.gov (United States)

    Segura-Campos, Maira Rubi; Ciau-Solís, Norma; Rosado-Rubio, Gabriel; Chel-Guerrero, Luis; Betancur-Ancona, David

    2014-01-01

    Chia (Salvia hispanica L.) constitutes a potential alternative raw material and ingredient in food industry applications due to its dietary fiber content. Gum can be extracted from its dietary fiber fractions for use as an additive to control viscosity, stability, texture, and consistency in food systems. The gum extracted from chia seeds was characterized to determine their quality and potential as functional food additives. The extracted chia gum contained 26.2% fat and a portion was submitted to fat extraction, producing two fractions: gum with fat (FCG) and gum partly defatted (PDCG). Proximal composition and physicochemical characterization showed these fractions to be different (P oil-holding capacity (25.7 g oil/g fiber) and water absorption capacity (44 g water/g fiber). In dispersion trials, the gums exhibited a non-Newtonian fluid behavior, specifically shear thinning or pseudoplastic type. PDCG had more viscosity than FCG. Chia seed is an excellent natural source of gum with good physicochemical and functional qualities, and is very promising for use in food industry.

  12. Chemical and Functional Properties of Chia Seed (Salvia hispanica L. Gum

    Directory of Open Access Journals (Sweden)

    Maira Rubi Segura-Campos

    2014-01-01

    Full Text Available Chia (Salvia hispanica L. constitutes a potential alternative raw material and ingredient in food industry applications due to its dietary fiber content. Gum can be extracted from its dietary fiber fractions for use as an additive to control viscosity, stability, texture, and consistency in food systems. The gum extracted from chia seeds was characterized to determine their quality and potential as functional food additives. The extracted chia gum contained 26.2% fat and a portion was submitted to fat extraction, producing two fractions: gum with fat (FCG and gum partly defatted (PDCG. Proximal composition and physicochemical characterization showed these fractions to be different (P<0.05. The PDCG had higher protein, ash, and carbohydrates content than the FCG, in addition to higher water-holding (110.5 g water/g fiber and water-binding capacities (0.84 g water/g fiber. The FCG had greater oil-holding capacity (25.7 g oil/g fiber and water absorption capacity (44 g water/g fiber. In dispersion trials, the gums exhibited a non-Newtonian fluid behavior, specifically shear thinning or pseudoplastic type. PDCG had more viscosity than FCG. Chia seed is an excellent natural source of gum with good physicochemical and functional qualities, and is very promising for use in food industry.

  13. Advances in identification of plant gums in cultural heritage by thermally assisted hydrolysis and methylation.

    Science.gov (United States)

    Riedo, Chiara; Scalarone, Dominique; Chiantore, Oscar

    2010-02-01

    Plant gums are present in works of art as binding media for watercolours and adhesives for cellulosic substrates. Thermally assisted hydrolysis and methylation (THM) in combination with analytical pyrolysis coupled to GC/MS has been applied to the characterisation of plant gums typically used in artworks. THM products from standard samples of arabic gum, tragacanth gum and cherry gum were characterised. The main products identified are permethylated and partially methylated aldonic acids, characteristic of specific epimeric sugars. Aldonic acids were formed by alkaline hydrolysis of free reducing sugars and of reducing polysaccharide terminal groups, while methylation occurs during pyrolysis. The presence of these characteristic markers allows gum identification. A systematic analysis of all the parameters that can affect the marker yields was performed. In particular, the influence of pyrolysis temperature, reagent concentration and contact time between tetramethylammonium hydroxide and sample were studied, and different kinds of sample preparation procedures were tested. Some analyses on real watercolours were performed, and gum binders were classified using the peak area ratio of the main monosaccharide markers.

  14. STABILITY OF KETOPROFEN COATED BY CHITOSAN-GUAR GUM GEL

    Directory of Open Access Journals (Sweden)

    Purwantiningsih Sugita

    2010-06-01

    Full Text Available The coating stability of ketoprofen by chitosan-guar gum gel has been studied. Into 228.6 mL of 1.75% (w/v chitosan solution in 1% (v/v acetic acid, 38.1 mL of guar gum (gg solution was added with concentration variation of 0.35, 0.55, and 0.75% (w/v for ketoprofen microcapsules, and stirred with magnetic stirrer until homogenous. Afterwards, 7.62 mL of glutaraldehyde (glu was added slowly under stirring, with concentrations varied: 3, 3.5, and 4% (v/v. All mixtures were shaked for 20 min for homogenization. Into each microcapsule mixture for ketoprofen, a solution of 2 g of ketoprofen in 250 mL of 96% ethanol was added. Every mixture was then added with 5 mL of 2% Tween-80 and stirred with magnetic stirrer for an hour at room temperature. Conversion of suspension into fine powders/granules (microcapsules was done by using spray dryer. Every microcapsule formula was packed into capsules, as much as 100 g per capsule. The capsules were contained in 100-mL dark bottles and the bottles were kept in climatic chamber at (40 ± 2 °C and RH (75 ± 5 % for 3 months. The microcapsule stabilities were tested chemically and physically. The result showed that formulation of ketoprofen preparation composed of 1.75% (w/v chitosan, 0.35% (w/v gg, and 3.50% (v/v glu, was relatively the best, with ketoprofen percentage left in microcapsule after 3 months, degradation rate constant, and shelf life of 80.33%, 0.0351 % week-1, and 18.92 months, respectively. Reaction kinetic model for this formula followed Prout-Tompkins equation and the degradation of ketoprofen was seem to follow autocatalytic reaction mechanism controlled by the formation and growth of reaction core.   Keywords: Ketoprofen, chitosan-guar gum gel

  15. Remineralization of enamel subsurface lesions by chewing gum with added calcium.

    Science.gov (United States)

    Cai, Fan; Shen, Peiyan; Walker, Glenn D; Reynolds, Coralie; Yuan, Yi; Reynolds, Eric C

    2009-10-01

    Chewing sugar-free gum has been shown to promote enamel remineralization. Manufacturers are now adding calcium to the gum in an approach to further promote enamel remineralization. The aim of this study was to compare the remineralization efficacy of four sugar-free chewing gums, two containing added calcium, utilizing a double-blind, randomized, crossover in situ model. The sugar-free gums were: Trident Xtra Care, Orbit Professional, Orbit and Extra. Ten subjects wore removable palatal appliances with four human-enamel half-slab insets containing subsurface demineralized lesions. For four times a day for 14 consecutive days subjects chewed one of the chewing gums for 20min. After each treatment the enamel slabs were removed, paired with their respective demineralized control slabs, embedded, sectioned and mineral level determined by microradiography. After 1-week rest the subjects chewed another of the four gums and this was repeated until each subject had used the four gum products. Chewing with Trident Xtra Care resulted in significantly higher remineralization (20.67+/-1.05%) than chewing with Orbit Professional (12.43+/-0.64%), Orbit (9.27+/-0.59%) or Extra (9.32+/-0.35%). The form of added calcium in Trident Xtra Care was CPP-ACP and that in Orbit Professional calcium carbonate with added citric acid/citrate for increased calcium solubility. Although saliva analysis confirmed release of the citrate and calcium from the Orbit Professional gum the released calcium did not result in increased enamel remineralization over the normal sugar-free gums. These results highlight the importance of calcium ion bioavailability in the remineralization of enamel subsurface lesions in situ.

  16. Natural gums of plant origin as edible coatings for food industry applications.

    Science.gov (United States)

    Saha, Anuradha; Tyagi, Shvetambri; Gupta, Rajinder K; Tyagi, Yogesh K

    2017-12-01

    Natural plant-based gums and their derivatives are widely utilized in food industries, however, their applications as edible coatings to extend fresh fruits and vegetable shelf-life has been explored recently. These natural polymeric polysaccharides have many advantages as compared to synthetic polymers, because they are biodegradable, nontoxic, economical and easily available in the environment. Natural gums can also be semi synthetically modified to produce derivatives, which can easily compete with the synthetic preservatives available on the food market. In this review, the recent developments in the use of natural gums and their derivatives as edible coatings have been explored and discussed.

  17. Relative bioavailability of methadone hydrochloride administered in chewing gum and tablets

    DEFF Research Database (Denmark)

    Christrup, Lona Louring; Angelo, H.R.; Bonde, J.

    1990-01-01

    Methadone administered in chewing gum in doses of 16.7-22.6 mg to seven patients in a study using an open balanced cross-over design, was compared with 20 mg of methadone given perorally as tablets. There was no significant difference in the AUC/D obtained after administration of chewing gum...... and tablets (p>0.05). It is concluded that the chewing gum formulation should be considered for further testing with respect to suppression of abstinence syndrome in narcotic addicts....

  18. Trace element evaluation of different varieties of chewing gum by radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Zaidi, J.H.; Arif, M.; Fatima, I.; Ahmad, S.; Qureshi, I.H.

    2000-01-01

    Extensive use of chewing gums, by children in particular, entails the evaluation of trace element contents in them. Radiochemical neutron activation analysis (RNAA) was successfully employed to determine the concentration of 35 trace elements (essential, toxic and nonessential) in eight different brands of chewing gum generally consumed in Rawalpindi/Islamabad area. Comparison of trace element data of our work with literature has been presented. None of the elements detected in the brands of chewing gum examined was found to be present at a level representing a substantial contribution to the total dietary intake of the element. (author)

  19. Dilute solution, flow behavior, thixotropy and viscoelastic characterization of cress seed (Lepidium sativum) gum fractions

    DEFF Research Database (Denmark)

    Razmkhah, Somayeh; Razavi, Seyed Mohammad Ali; Mohammadifar, Mohammad Amin

    2017-01-01

    In this study, rheological properties of cress seed gum (CSG) and its fractions (F1, F2, F3; fractionated using stepwise extraction with water) were investigated. Cress seed gum and its fractions revealed random coil conformation in dilute regimes; chain flexibility and intrinsic viscosity...... increased from F1 to F2 to F3. The mechanical spectra derived from strain sweep and frequency sweep measurements indicated that the gum dispersions had viscoelastic behavior; all of them were classified as weak gels and the gel network got stronger along the series of F1, F2 and F3. Arrhenius-type model...

  20. Surface Modification of Magnetic Nanoparticles Using Gum Arabic

    International Nuclear Information System (INIS)

    Williams, Darryl N.; Gold, Katie A.; Holoman, Tracey R. Pulliam; Ehrman, Sheryl H.; Wilson, Otto C.

    2006-01-01

    Magnetite nanoparticles were synthesized and functionalized by coating the particle surfaces with gum arabic (GA) to improve particle stability in aqueous suspensions (i.e. biological media). Particle characterization was performed using transmission electron microscopy (TEM) and dynamic light scattering (DLS) to analyze the morphology and quantify the size distribution of the nanoparticles, respectively. The results from DLS indicated that the GA-treated nanoparticles formed smaller agglomerates as compared to the untreated samples over a 30-h time frame. Thermogravimetric analyses indicated an average weight loss of 23%, showing that GA has a strong affinity toward the iron oxide surface. GA most likely contributes to colloid stability via steric stabilization. It was determined that the adsorption of GA onto magnetite exhibits Langmuir behavior

  1. Surface Modification of Magnetic Nanoparticles Using Gum Arabic

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Darryl N., E-mail: williamsdar@E-mail.chop.edu; Gold, Katie A.; Holoman, Tracey R. Pulliam; Ehrman, Sheryl H. [University of Maryland, Department of Chemical Engineering (United States); Wilson, Otto C. [Catholic University, Department of Biomedical Engineering (United States)

    2006-10-15

    Magnetite nanoparticles were synthesized and functionalized by coating the particle surfaces with gum arabic (GA) to improve particle stability in aqueous suspensions (i.e. biological media). Particle characterization was performed using transmission electron microscopy (TEM) and dynamic light scattering (DLS) to analyze the morphology and quantify the size distribution of the nanoparticles, respectively. The results from DLS indicated that the GA-treated nanoparticles formed smaller agglomerates as compared to the untreated samples over a 30-h time frame. Thermogravimetric analyses indicated an average weight loss of 23%, showing that GA has a strong affinity toward the iron oxide surface. GA most likely contributes to colloid stability via steric stabilization. It was determined that the adsorption of GA onto magnetite exhibits Langmuir behavior.

  2. Preparation and characterization of a chemically sulfated cashew gum polysaccharide

    Energy Technology Data Exchange (ETDEWEB)

    Moura Neto, Erico de; Maciel, Jeanny da S.; Cunha, Pablyana L. R.; Paula, Regina Celia M. de; Feitosa, Judith P.A., E-mail: judith@dqoi.ufc.br [Departamento de Quimica Organica e Inorganica, Universidade Federal do Ceara, Fortaleza (Brazil)

    2011-09-15

    Cashew gum (CG) was sulfated in pyridine:formamide using chlorosulfonic acid as the reagent. Confirmation of sulfation was obtained by Fourier transform infrared (FTIR) spectroscopy through the presence of an asymmetrical S=O stretching vibration at 1259 cm{sup -1}. The degrees of substitution were 0.02, 0.24 and 0.88 determined from the sulfur percentage. 1D and 2D nuclear magnetic resonance (NMR) data showed that the sulfation occurred at primary carbons. An increase of at least 4% of the solution viscosity was observed due to sulfation. The thermal gravimetric curves (TGA) indicate that the derivatives are stable up to ca. 200 deg C. The sulfated CG is compared to carboxymethylated CG in order to verify the possibility of the use of the former in the preparation of polyelectrolyte complexes; the latter is already being used for this application. (author)

  3. Dressing percentage in Romanian spotted breed

    Directory of Open Access Journals (Sweden)

    eleonora nistor

    2013-05-01

    Full Text Available The purpose of this research was to determine whether there are significant differences in terms of carcass weight, forequarters, hindquarters and the dressing percentage among Romanian Spotted breed steers and first generation crossbreed obtained between Romanian Spotted and Holstein at slaughter age of 12 and 17 months respectively. Study was done on Romanian Spotted breed steer aged 12 months (36 heads and 17 months (19 heads; Romanian Spotted x Holstein first generation crossbreed of aged 12 months (29 heads and 17 months (20 heads. The Romanian Spotted breed steer, show superiority in terms of carcass weight compared to crossbreed of Romanian Spotted x Holstein, therefore this breed has a better suitability for fattening for meat. Regarding dressing percentage is higher in crossbreed of Romanian Spotted x Holstein compared with Romanian Spotted breed steers, but the difference is insignificant.

  4. Dominant white spotting in the Chinese hamster.

    Science.gov (United States)

    Henwood, C; Henwood, J; Robinson, R

    1987-01-01

    An autosomal dominant white spotting mutant is described for the Chinese hamster. The mutant gene is designated as dominant spot (symbol Ds). The homozygote DsDs is a prenatal lethal while the heterozygote Ds + displays white spotting. The expression of white is variable, ranging from a white forehead spot to extensive white on the body. The venter is invariably white. Growth appears to be normal and the fertility of both sizes shows no impairment.

  5. Laser Pyrometer For Spot Temperature Measurements

    Science.gov (United States)

    Elleman, D. D.; Allen, J. L.; Lee, M. C.

    1988-01-01

    Laser pyrometer makes temperature map by scanning measuring spot across target. Scanning laser pyrometer passively measures radiation emitted by scanned spot on target and calibrated by similar passive measurement on blackbody of known temperature. Laser beam turned on for active measurements of reflectances of target spot and reflectance standard. From measurements, temperature of target spot inferred. Pyrometer useful for non-contact measurement of temperature distributions in processing of materials.

  6. A Drosophila wing spot test

    International Nuclear Information System (INIS)

    Ayaki, Toshikazu; Yoshikawa, Isao; Niikawa, Norio; Hoshi, Masaharu.

    1986-01-01

    A Drosophila wing spot test system was used to investigate the effects of low doses of X-rays, gamma rays, and both 2.3 and 14.1 MeV neutrons on somatic chromosome mutation (SCM) induction. The incidence of SCM was significantly increased with any type of radiation, with evident linear dose-response relationship within the range of 3 to 20 cGy. It was estimated that relative biological effectiveness value for SCM induction of 2.3 MeV neutrons to X-rays and gamma rays is much higher than that of 14.1 MeV neutrons to those photons (2.4 vs 8.0). The Drosophila wing spot test system seems to become a promising in vivo experimental method for higher animals in terms of the lack of necessity for a marvelously large number of materials required in conventional test system. (Namekawa, K.)

  7. Sweet Spots and Door Stops

    Science.gov (United States)

    Thompson, Michael; Tsui, Stella; Leung, Chi Fan

    2011-01-01

    A sweet spot is referred to in sport as the perfect place to strike a ball with a racquet or bat. It is the point of contact between bat and ball where maximum results can be produced with minimal effort from the hand of the player. Similar physics can be applied to the less inspiring examples of door stops; the perfect position of a door stop is…

  8. The relative bioavailability of loratadine administered as a chewing gum formulation in healthy volunteers

    DEFF Research Database (Denmark)

    Noehr-Jensen, Lene; Damkier, Per; Bidstrup, Tanja Busk

    2006-01-01

    the collection of saliva. METHODS: Twelve healthy male volunteers participated in a four-period cross-over trial evaluating the effect of dosage forms on the pharmacokinetics of a single dose of loratadine. Loratadine was administered as two 10-mg conventional tablet, two 10-mg smelt tablet, a 30-mg portion...... of medicated chewing gum without collection of saliva and a 30-mg portion of medicated chewing gum with collection of saliva. Blood samples were taken at predefined sampling points 0-24 h after medication, and the plasma concentrations of loratadine and desloratadine were determined by high-performance liquid...... statistically significantly different from the conventional tablet formulation. Plasma concentrations of desloratadine following the administration of loratadine as chewing gum with saliva collection were very low. CONCLUSION: Our study showed that formulation of loratadine as a medicated chewing gum results...

  9. Effect of guar gum on stability and physical properties of orange juice.

    Science.gov (United States)

    Lv, Ruihuan; Kong, Qing; Mou, Haijin; Fu, Xiaodan

    2017-05-01

    The objective of current study was to determine the stability and physical properties of orange juice which was added with guar gum. The optimal formulation showed good stability and physical properties, in light of better indices on the serum cloudiness (turbidity), sensory analysis, particle size distribution, aroma concentration analysis and rheological properties. By serum cloudiness (turbidity), the viscosity of optimal guar gum used in orange juice was 584mpas; by the other four methods, the optimal formulation was determined: 0.1% guar gum (584mpas) combined with 0.03% carboxymethyl cellulose (CMC). The results indicated that the guar gum can be used to partially replaced CMC and improve the stability and physical properties of orange juice. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Controlled dual release study of curcumin and a 4-aminoquinoline analog from gum acacia containing hydrogels

    CSIR Research Space (South Africa)

    Aderibigbe, BA

    2014-10-01

    Full Text Available The potential of gum acacia containing hydrogels as controlled dual-drug delivery systems for antiprotozoal agents was investigated. 4-Aminoquinoline analog and curcumin were selected as model drugs because they exhibit antiprotozoal activity...

  11. Tragacanth Gum: Structural Composition, Natural Functionality and Enxymatic Conversion as Source of Potential Prebiotic Activity

    DEFF Research Database (Denmark)

    Ahmadi Gavlighi, Hassan

    and fractionated by centrifugation to soluble and insoluble. To examine correlation between composition structure, sugar composition and methoxyl and acetyl content was determined. The six gum samples varied with respect totheir levels and ratios of water-soluble and water-swellable fractions, their monosaccharide...... species of Iranian Astragalus for their emulsion stabilizing effects and their detailed chemical composition in order to examine any possible correlation between the make-up and the emulsion stabilizing properties of gum tragacanth. Also, enzymatic modification of highly fucose content of tragacanth gum...... and separation via membrane technique to get different molecular size. Furthermore, examination of compositional structure and effect of different molecular size on potential prebiotic was evaluated. The first part of the present study was selected of six different species of Astragalus and exudates of gum...

  12. Antibacterial activities of some constituents from oleo-gum-resin of Commiphora mukul.

    Science.gov (United States)

    Saeed, M Asif; Sabir, A W

    2004-03-01

    The essential oil, chloroform extract and seven sesquiterpenoids compounds newly isolated from the oleo-gum-resin of Commiphora mukul showed a wide range of inhibiting activity against both Gram (+) and Gram (-) bacteria.

  13. Potential benefits of chewing gum for the delivery of oral therapeutics and its possible role in oral healthcare.

    Science.gov (United States)

    Wessel, Stefan W; van der Mei, Henny C; Maitra, Amarnath; Dodds, Michael W J; Busscher, Henk J

    2016-10-01

    Over the years, chewing gum has developed from a candy towards an oral health-promoting nutraceutical. This review summarizes evidence for the oral health benefits of chewing gum, emphasizing identification of active ingredients in gum that facilitate prevention and removal of oral biofilm. Chewing of sugar-free gum yields oral health benefits that include clearance of food debris, reduction in oral dryness, increase of biofilm pH and remineralization of enamel. These basic effects of chewing gum are attributed to increased mastication and salivation. Active ingredients incorporated in chewing gums aim to expand these effects to inhibition of extrinsic tooth stain and calculus formation, enhanced enamel remineralization, reduction of the numbers of bacteria in saliva and amount of oral biofilm, neutralization of biofilm pH, and reduction of volatile sulfur compounds. Evidence for oral-health benefits of chewing gum additives is hard to obtain due to their relatively low concentrations and rapid wash-out. Clinical effects of gum additives are overshadowed by effects of increased mastication and salivation due to the chewing of gum and require daily chewing of gum for prolonged periods of time. Future studies on active ingredients should focus on specifically targeting pathogenic bacteria, whilst leaving the healthy microbiome unaffected.

  14. Overexpression, purification, and biochemical characterization of GumC, an enzyme involved in the biosynthesis of exopolysaccharide by Xylella fastidiosa.

    Science.gov (United States)

    de Pieri, Celina; Beltramini, Leila M; Selistre-de-Araújo, Heloisa S; Vettore, André L; da Silva, Felipe R; Arruda, Paulo; Oliva, Glaucius; de Souza, Dulce H F

    2004-04-01

    GumC is one of nine enzymes involved in the biosynthesis of fastidian gum, an exopolysaccharide produced by Xylella fastidiosa that may be linked directly to the pathogenicity of the microorganism. GumC may be responsible for gum polymerization or secretion through the membrane of X. fastidiosa. To perform structure and functions studies, we developed an expression system for the production of GumC as a fusion protein with maltose binding protein (MBP) using pMAL-c2x vector. The GumC-MBP fusion protein was expressed as a 94 kDa protein, which strongly reacts with anti-MBP antibodies. GumC-MBP was isolated by affinity chromatography through an amylose column and used to produce antibodies against the fusion protein. After the enzymatic cleavage of MBP, GumC was purified on a Q Sepharose Fast Flow column. GumC showed a molecular weight corresponding to the expected one (52 kDa) and its N-terminal sequence was identical to that deduced from the DNA. The shape of the circular dichroism spectrum was compatible with a folded protein that contains alpha-helical regions in its structure. Therefore, in this study we describe, for the first time, the production of GumC recombinant protein.

  15. Justifications shape ethical blind spots.

    Science.gov (United States)

    Pittarello, Andrea; Leib, Margarita; Gordon-Hecker, Tom; Shalvi, Shaul

    2015-06-01

    To some extent, unethical behavior results from people's limited attention to ethical considerations, which results in an ethical blind spot. Here, we focus on the role of ambiguity in shaping people's ethical blind spots, which in turn lead to their ethical failures. We suggest that in ambiguous settings, individuals' attention shifts toward tempting information, which determines the magnitude of their lies. Employing a novel ambiguous-dice paradigm, we asked participants to report the outcome of the die roll appearing closest to the location of a previously presented fixation cross on a computer screen; this outcome would determine their pay. We varied the value of the die second closest to the fixation cross to be either higher (i.e., tempting) or lower (i.e., not tempting) than the die closest to the fixation cross. Results of two experiments revealed that in ambiguous settings, people's incorrect responses were self-serving. Tracking participants' eye movements demonstrated that people's ethical blind spots are shaped by increased attention toward tempting information. © The Author(s) 2015.

  16. In vitro and in vivo acaricide action of juvenoid analogs produced from the chemical modification of Cymbopogon spp. and Corymbia citriodora essential oil on the cattle tick Rhipicephalus (Boophilus) microplus.

    Science.gov (United States)

    Chagas, Ana Carolina S; Domingues, Luciana F; Fantatto, Rafaela R; Giglioti, Rodrigo; Oliveira, Márcia C S; Oliveira, Daniela H; Mano, Renata A; Jacob, Raquel G

    2014-09-15

    The present study aimed to evaluate the acaricidal action of the chemically modified essential oil of Cymbopogon spp. and Corymbia citriodora on Rhipicephalus (Boophilus) microplus. Citronellal was converted into N-butylcitronellylamine and in N-prop-2-inylcitronellylamine, analogs of juvenoids, by reductive amination using butylamine (N1 to N3) and propargylamine (N4 to N7). In vitro assays included the adult immersion, and larval packet tests. Engorged females were weighed in groups of 10 and tested in three replicates for six concentrations. They were immersed in the modified oils or control solution and incubated. In the larval packet test, the same substances and concentrations were evaluated in three replicates. In the in vivo test, six pastured heifers naturally infested with R. (B.) microplus were used per treatment: negative control, positive control (amitraz, Triatox(®)), original oil of C. citriodora at 1.5%, and modified oil containing 0.9% N-prop-2-inylcitronellylamine (N7). Ticks were counted in the right side of the body in 24 animals from day D-3 to D21. LC50 and LC90 were obtained by Probit analysis, while the in vivo results were log transformed and compared using the Tukey test. Among the nitrocellylamines tested in vitro, N6 was most effective on the engorged females (100% efficacy at 50mg/mL) and N7 on the larvae (100% efficacy at 6.25mg/mL). In the test with larvae, the original oil of C. citriodora was less effective than the counterpart modified oil (N7), proving that the chemical modification optimized its effect. In the in vivo test, no significant difference was observed between N7 and the negative control. The average numbers of ticks on the animals' right side were 32.8, 8.1, 37.9 and 35.4 for the negative control, positive control, original oil and N7, respectively. The chemical modification improved the efficacy in vitro, but it was not observed in vivo, perhaps due to the low stability of the amines under field conditions. The

  17. Determination of trace elements in chewing gum by neutron activation analysis

    International Nuclear Information System (INIS)

    Dietz, M.L.

    1990-01-01

    Six trace elements of nutritional or toxicological interest (Al, Ca, Cl, Mn, Na and Sr) were determined in three different brands of chewing gum by instrumental neutron activation analysis. For the particular brands of gum examined, none of the detected elements was found to be present at a level representing a substantial contribution to the total dietary intake of the element for an American adult. (author) 11 refs.; 3 tabs

  18. EFFECTS.OF BORIC ACID ON THE CURE OF BORON-FILLED Y-3602 SILICONE GUM

    Energy Technology Data Exchange (ETDEWEB)

    Leichliter, G E

    1974-10-01

    The first two phases of a program designed to determine the effects of boric acid on the cure of Y-3602 silicone gum were conducted to evaluate extraction solvents and extraction time. The standard production formulation of B10-filled Y-3602 silicone gum was used in these evaluations. Results showed that the best solvent for reproducibility and high amine content was chloroform. The second phase indicated that extraction was essentially complete at the end of 4 hours.

  19. Influence of gas injection on viscous and viscoelastic properties of Xanthan gum.

    Science.gov (United States)

    Bobade, Veena; Cheetham, Madalyn; Hashim, Jamal; Eshtiaghi, Nicky

    2018-05-01

    Xanthan gum is widely used as a model fluid for sludge to mimic the rheological behaviour under various conditions including impact of gas injection in sludge. However, there is no study to show the influence of gas injection on rheological properties of xanthan gum specifically at the concentrations at which it is used as a model fluid for sludge with solids concentration above 2%. In this paper, the rheological properties of aqueous xanthan gum solutions at different concentrations were measured over a range of gas injection flow rates. The effect of gas injection on both the flow and viscoelastic behaviour of Xanthan gum (using two different methods - a creep test and a time sweep test) was evaluated. The viscosity curve of different solid concentrations of digested sludge and waste activated sludge were compared with different solid concentrations of Xanthan gum and the results showed that Xanthan gum can mimic the flow behaviour of sludge in flow regime. The results in linear viscoelastic regime showed that increasing gas flow rate increases storage modulus (G'), indicating an increase in the intermolecular associations within the material structure leading to an increase in material strength and solid behaviour. Similarly, in creep test an increase in the gas flow rate decreased strain%, signifying that the material has become more resistant to flow. Both observed behaviour is opposite to what occurs in sludge under similar conditions. The results of both the creep test and the time sweep test indicated that choosing Xanthan gum aqueous solution as a transparent model fluid for sludge in viscoelastic regime under similar conditions involving gas injection in a concentration range studied is not feasible. However Xanthan gum can be used as a model material for sludge in flow regime; because it shows a similar behaviour to sludge. Copyright © 2018 Elsevier Ltd. All rights reserved.

  20. Application of Neem Gum for Aqueous Film Coating of Ciprofloxacin Tablets

    OpenAIRE

    A P Kulkarni; Y R Shaikh; MH GR Dehghan

    2013-01-01

    Summary. At present the pharmaceutical industry and academia are focusing on the use of natural materials and resources for development of pharmaceutical product. In previous study, neem gum (NG), obtained from Azadirachata indica plant revealed satisfactory film forming ability. The present study evaluates the application potential of neem gum, as an aqueous film coating material, using ciprofloxacin hydrchloride (drug) as a model drug. Initial study of physical mixture indicated absence of ...

  1. Pengaruh Perbandingan Bubur Buah Sirsak dan Pepaya Serta Penambahan Gum Arab terhadap Mutu Fruit Leather

    OpenAIRE

    Harahap, Edy Syahputra

    2015-01-01

    The aim of this research was to find the effect of ratio of soursop with papaya pulps and several arabic gum addition on the quality of mixture of soursop and papaya fruit leather. This research was conducted at the Laboratory of Food Technology, Faculty of Agriculture, University of Sumatera Utara, Medan, using completely randomized design with two factors, i.e. :ratio of soursop with papaya pulps (S) : (70% : 30% ; 60% : 40% ; 50% : 50% ; 40% : 60% ; 30% : 70%) and arabic gum concentration ...

  2. Pengaruh Perbandingan Nenas Dengan Pepaya Dan Konsentrasi Gum Arab Terhadap Mutu Fruit Leather

    OpenAIRE

    Lubis, Mei Sya Putri

    2014-01-01

    Influence ratio of pineapple with papaya and arabic gum concentration on the quality of fruit leather supervised by RONA J. NAINGGOLAN and ERA YUSRAINI. The aim of this research was to find the effect of ratio pineapple with papaya pulps and several arabic gum concentration on the quality of pineapple with papaya of mixture fruit leather. This research was conducted at the Laboratory of Food Technology, Faculty of Agriculture, University of Sumatera Utara, Medan, using completely randomize...

  3. Probiotic capsules and xylitol chewing gum to manage symptoms of pharyngitis: a randomized controlled factorial trial.

    Science.gov (United States)

    Little, Paul; Stuart, Beth; Wingrove, Zoe; Mullee, Mark; Thomas, Tammy; Johnson, Sophie; Leydon, Gerry; Richards-Hall, Samantha; Williamson, Ian; Yao, Lily; Zhu, Shihua; Moore, Michael

    2017-12-18

    Reducing the use of antibiotics for upper respiratory tract infections is needed to limit the global threat of antibiotic resistance. We estimated the effectiveness of probiotics and xylitol for the management of pharyngitis. In this parallel-group factorial randomized controlled trial, participants in primary care (aged 3 years or older) with pharyngitis underwent randomization by nurses who provided sequential intervention packs. Pack contents for 3 kinds of material and advice were previously determined by computer-generated random numbers: no chewing gum, xylitol-based chewing gum (15% xylitol; 5 pieces daily) and sorbitol gum (5 pieces daily). Half of each group were also randomly assigned to receive either probiotic capsules (containing 24 × 10 9 colony-forming units of lactobacilli and bifidobacteria) or placebo. The primary outcome was mean self-reported severity of sore throat and difficulty swallowing (scale 0-6) in the first 3 days. We used multiple imputation to avoid the assumption that data were missing completely at random. A total of 1009 individuals consented, 934 completed the baseline assessment, and 689 provided complete data for the primary outcome. Probiotics were not effective in reducing the severity of symptoms: mean severity scores 2.75 with no probiotic and 2.78 with probiotic (adjusted difference -0.001, 95% confidence interval [CI] -0.24 to 0.24). Chewing gum was also ineffective: mean severity scores 2.73 without gum, 2.72 with sorbitol gum (adjusted difference 0.07, 95% CI -0.23 to 0.37) and 2.73 with xylitol gum (adjusted difference 0.01, 95% CI -0.29 to 0.30). None of the secondary outcomes differed significantly between groups, and no harms were reported. Neither probiotics nor advice to chew xylitol-based chewing gum was effective for managing pharyngitis. Trial registration: ISRCTN, no. ISRCTN51472596. © 2017 Joule Inc. or its licensors.

  4. Resistance Spot Welding of dissimilar Steels

    Directory of Open Access Journals (Sweden)

    Ladislav Kolařík

    2012-01-01

    Full Text Available This paper presents an analysis of the properties of resistance spot welds between low carbon steel and austenitic CrNi stainless steel. The thickness of the welded dissimilar materials was 2 mm. A DeltaSpot welding gun with a process tape was used for welding the dissimilar steels. Resistance spot welds were produced with various welding parameters (welding currents ranging from 7 to 8 kA. Light microscopy, microhardness measurements across the welded joints, and EDX analysis were used to evaluate the quality of the resistance spot welds. The results confirm the applicability of DeltaSpot welding for this combination of materials.

  5. Prosopis alba exudate gum as excipient for improving fish oil stability in alginate-chitosan beads.

    Science.gov (United States)

    Vasile, Franco Emanuel; Romero, Ana María; Judis, María Alicia; Mazzobre, María Florencia

    2016-01-01

    The aim of the present work was to employ an exudate gum obtained from a South American wild tree (Prosopis alba), as wall material component to enhance the oxidative stability of fish oil encapsulated in alginate-chitosan beads. For this purpose, beads were vacuum-dried and stored under controlled conditions. Oxidation products, fatty acid profiles and lipid health indices were measured during storage. Alginate-chitosan interactions and the effect of gum were manifested in the FT-IR spectra. The inclusion of the gum in the gelation media allowed decreasing the oxidative damage during storage in comparison to the free oil and alginate-chitosan beads. The gum also improved wall material properties, providing higher oil retention during the drying step and subsequent storage. Fatty acids quality and lipid health indices were widely preserved in beads containing the gum. Present results showed a positive influence of the gum on oil encapsulation and stability, being the main mechanism attributed to a physical barrier effect. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Glucose absorption, hormonal release and hepatic metabolism after guar gum ingestion

    Science.gov (United States)

    Simoes Nunes, C.; Malmlof, K.

    1992-01-01

    Six non-anaesthetized Large White pigs (mean body weight 59 +/- 1.7 kg) were fitted with permanent catheters in the portal vein, the brachiocephalic artery and the right hepatic vein and with electromagnetic flow probes around the portal vein and the hepatic artery. The animals were provided a basal none-fibre diet (diet A) alone or together with 6% guar gum (diet B) or 15% purified cellulose (diet C). The diets were given for 1 week and according to a replicated 3 x 3 latin-square design. On the last day of each adaptation period test meals of 800 g were given prior to blood sampling. The sampling was continued for 8 h. Guar gum strongly reduced the glucose absorption as well as the insulin, gastric inhibitory polypeptide (GIP) and insulin-like growth factor-1 (IGF-1) production. However, the reduction in peripheral blood insulin levels caused by guar gum was not associated with a change in hepatic insulin extraction. IGF-1 appeared to be strongly produced by the gut. The liver had a net uptake of the peptide. Ingestion of guar gum increased the hepatic extraction coefficient of gut produced IGF-1. Guar gum ingestion also appeared to decrease pancreatic glucagon secretion. Cellulose at the level consumed had very little effect on the parameters considered. It is suggested that the modulation of intestinal mechanisms by guar gum was sufficient to mediate the latter internal metabolic effects.

  7. The feasibility of Cassia fistula gum with polyaluminium chloride for the decolorization of reactive dyeing wastewater

    Directory of Open Access Journals (Sweden)

    Perng Yuan Shing

    2015-01-01

    Full Text Available In order to find a new environmental-friendly coagulant that can partially replace conventional polyaluminium chloride (PAC which was shown to be toxic to aquatic environment, gum extracted from seeds of Cassia fistula Linn. (CF was investigated in decolorization of reactive dyes Blue 19 (RB19 and Black 5 (RB5 using jar-test experiments. The optimal results showed that crude CF gum (at pH 10, initial dye concentrations (IDC of 100 and 50 mg L-1, gum dosages 200 and 300 mg L-1, reaction time 30 and 45 min, and agitation speed 60 rpm did not achieve high degrees of decolorization in RB5 and RB19 (55.7 and 62.0 %, respectively as compared with PAC coagulant (97.2 and 94.4 %, respectively at the same IDC and reaction time. Whereas when CF gum was used in combination with PAC, decolorization efficiencies of both dyes reached over 92 % at 40 % volume fraction of gum. These results indicated the potential of using CF gum as a “green” coagulant or as a contributing factor to color removal of textile wastewater.

  8. Simultaneous degumming and production of a natural gum from Crotalaria juncea seeds: Physicochemical and rheological characterization.

    Science.gov (United States)

    Sadhukhan, Suvra; Bhattacharjee, Annesha; Sarkar, Ujjaini; Baidya, Pabitra Kumar; Baksi, Sibashish

    2018-01-12

    The oil extracted from Crotalaria juncea (Sunn-hemp) contains 70% of gum. Several methods of degumming are attempted in order to maximize the yield of gum. During appropriate water induced degumming, about 95-98% of phosphatides are separated. The maximum oil yield for two types of degummimg processes are 0.59% and 0.69% corresponding to hot water and pure O-phosphoric acid (19.88 N) treatment respectively. The % oil yield obtained for TOP degumming is about 0.78%. Physico-chemical characteristics of the isolated gum such as moisture, ash, protein, fat and aqueous solubility along with FTIR and TGA analysis are studied in order to evaluate the effect of extraction process. The behaviour of gum on the molecular scale is evaluated through alcohol treatment. Chromatographic analysis determines the monosaccharide content of the gum with glucose: xylose: arabinose::54: 34:1. Rheological characterization shows that the juncea gum solutions are shear rate dependent and the behaviour is shear-thinning (or pseudoplastic). Results show that the temperature dependent viscosity decreases with increasing shear rate. Copyright © 2018 Elsevier B.V. All rights reserved.

  9. Modified gum arabic cross-linked gelatin scaffold for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Sarika, P.R. [Department of Chemistry, Indian Institute of Space Science and Technology, Valiamala, Thiruvananthapuram, Kerala 695 547 (India); Cinthya, Kuriakose [Tissue Culture Laboratory, Biomedical Technology Wing, Sree Chitra Tirunal Institute for Medical Sciences and Technology, Poojappura, Thiruvananthapuram, Kerala 695 012 (India); Jayakrishnan, A. [Department of Biotechnology, Indian Institute of Technology Madras, Chennai 600 036 (India); Anilkumar, P.R., E-mail: anilkumarpr@sctimst.ac.in [Tissue Culture Laboratory, Biomedical Technology Wing, Sree Chitra Tirunal Institute for Medical Sciences and Technology, Poojappura, Thiruvananthapuram, Kerala 695 012 (India); James, Nirmala Rachel, E-mail: nirmala@iist.ac.in [Department of Chemistry, Indian Institute of Space Science and Technology, Valiamala, Thiruvananthapuram, Kerala 695 547 (India)

    2014-10-01

    The present work deals with development of modified gum arabic cross-linked gelatin scaffold for cell culture. A new biocompatible scaffold was developed by cross-linking gelatin (Gel) with gum arabic, a polysaccharide. Gum arabic was subjected to periodate oxidation to obtain gum arabic aldehyde (GAA). GAA was reacted with gelatin under appropriate pH to prepare the cross-linked hydrogel. Cross-linking occurred due to Schiff's base reaction between aldehyde groups of oxidized gum arabic and amino groups of gelatin. The scaffold prepared from the hydrogel was characterized by swelling properties, degree of cross-linking, in vitro degradation and scanning electron microscopy (SEM). Cytocompatibility evaluation using L-929 and HepG2 cells confirmed non-cytotoxic and non-adherent nature of the scaffold. These properties are essential for generating multicellular spheroids and hence the scaffold is proposed to be a suitable candidate for spheroid cell culture. - Highlights: • Gum arabic cross-linked gelatin scaffold was developed for tissue engineering. • Cross-linking was achieved by Schiff's base reaction. • The scaffold is non-cytotoxic and non adherent to fibroblast and hepatocytes. • The scaffolds are potential candidates for spheroid cell culture.

  10. Cell Free Xanthan Gum Production Using Continuous Recycled Packed Fibrous-bed Bioreactor-membrane

    Directory of Open Access Journals (Sweden)

    Rosalam, S.

    2008-01-01

    Full Text Available Although the xanthan gum has been produced as a commercial commodity, the biomass isolation and its recovery are still challenging. This study revealed the xanthan gum production by fermentation of Xanthomonas campestris DSMZ using glucose as a carbon source in an immobilised batch and a continuous recycled packed fibrous-bed bioreactor-membrane (CRPBFBM. The pure cotton fibre was used to immobilise the microbial cell biomass and to isolate from the liquid phase containing medium and xanthan gum. The cellulose acetate membrane with 0.45 µm was used to recover the xanthan gum. The batch fermentation showed that the immobilisation technique gave higher xanthan gum concentration at 20g/L than the free moving cell without immobilisation at 18g/L. The CRPBBM produced the highest xanthan gum concentration at 18.7 g/L at the dilution rate of 1.44 d-1. The highest production rate of CRPBFBM was 0.475 g/L-h. Further research needs to be conducted to ascertain the stability of the Xanthomonas Campestris DSMZ during a long period of continuous fermentation as well as up scaling the CRPBFBM.

  11. Pharmacological properties of guggulsterones, the major active components of gum guggul.

    Science.gov (United States)

    Shah, Rohan; Gulati, Vandana; Palombo, Enzo A

    2012-11-01

    Oleo gum resin secreted by Commiphora mukul, also known as gum guggul, has been used widely as an ayurvedic drug. Commiphora mukul is a short thorny shrub that is native to the Indian subcontinent. Oleo gum resin extracted by incision of the bark is a very complex mixture of gum, minerals, essential oils, terpenes, sterols, ferrulates, flavanones and sterones. Its active constituents, the Z- and E-guggulsterones, have been demonstrated to exhibit their biological activities by binding to nuclear receptors and modulating the expression of proteins involved in carcinogenic activities. Guggulsterones have also been reported to regulate gene expression by exhibiting control over other molecular targets including transcription factors such as nuclear factor (NF)-κB, signal transducer and activator of transcription (STAT) and steroid receptors. Considerable scientific evidence indicates the use of gum guggul as a therapeutic agent in the treatment of inflammation, nervous disorders, hyperlipidaemia and associated cardiac disorders such as hypertension and ischaemia, skin disorders, cancer and urinary disorders. This review highlights the taxonomic details, phytochemical properties and pharmacological profile of gum guggul. Copyright © 2012 John Wiley & Sons, Ltd.

  12. Modified gum arabic cross-linked gelatin scaffold for biomedical applications

    International Nuclear Information System (INIS)

    Sarika, P.R.; Cinthya, Kuriakose; Jayakrishnan, A.; Anilkumar, P.R.; James, Nirmala Rachel

    2014-01-01

    The present work deals with development of modified gum arabic cross-linked gelatin scaffold for cell culture. A new biocompatible scaffold was developed by cross-linking gelatin (Gel) with gum arabic, a polysaccharide. Gum arabic was subjected to periodate oxidation to obtain gum arabic aldehyde (GAA). GAA was reacted with gelatin under appropriate pH to prepare the cross-linked hydrogel. Cross-linking occurred due to Schiff's base reaction between aldehyde groups of oxidized gum arabic and amino groups of gelatin. The scaffold prepared from the hydrogel was characterized by swelling properties, degree of cross-linking, in vitro degradation and scanning electron microscopy (SEM). Cytocompatibility evaluation using L-929 and HepG2 cells confirmed non-cytotoxic and non-adherent nature of the scaffold. These properties are essential for generating multicellular spheroids and hence the scaffold is proposed to be a suitable candidate for spheroid cell culture. - Highlights: • Gum arabic cross-linked gelatin scaffold was developed for tissue engineering. • Cross-linking was achieved by Schiff's base reaction. • The scaffold is non-cytotoxic and non adherent to fibroblast and hepatocytes. • The scaffolds are potential candidates for spheroid cell culture

  13. Gum arabic/starch/maltodextrin/inulin as wall materials on the microencapsulation of rosemary essential oil.

    Science.gov (United States)

    Fernandes, Regiane Victória de Barros; Borges, Soraia Vilela; Botrel, Diego Alvarenga

    2014-01-30

    The effects of the partial or total replacement of gum arabic by modified starch, maltodextrin and inulin on the characteristics of rosemary essential oil microencapsulated by spray drying were evaluated in this study. The lowest level of water absorption under conditions of high relative humidity was observed in treatments containing inulin. The wettability property of the powders was improved by the addition of inulin. The total replacement of gum arabic by modified starch or a mixture of modified starch and maltodextrin (1:1, m/m) did not significantly affect the efficiency of encapsulation, although higher Tg values were exhibited by microcapsules prepared using pure gum arabic or gum arabic and inulin. 1,8-cineol, camphor and α-pinene were the main components identified by gas chromatography in the oils extracted from the microcapsules. The particles had smoother surfaces and more folds when gum arabic or inulin was present. Larger particles were observed in the powders prepared with pure gum arabic or modified starch. Copyright © 2013 Elsevier Ltd. All rights reserved.

  14. ESA uncovers Geminga's `hot spot'

    Science.gov (United States)

    2004-07-01

    16 July 2004 Astronomers using ESA’s X-ray observatory XMM-Newton have detected a small, bright ‘hot spot’ on the surface of the neutron star called Geminga, 500 light-years away. The hot spot is the size of a football field and is caused by the same mechanism producing Geminga’s X-ray tails. This discovery identifies the missing link between the X-ray and gamma-ray emission from Geminga. hi-res Size hi-res: 1284 kb Credits: ESA, P. Caraveo (IASF, Milan) Geminga's hot spot This figure shows the effects of charged particles accelerated in the magnetosphere of Geminga. Panel (a) shows an image taken with the EPIC instrument on board the XMM-Newton observatory. The bright tails, made of particles kicked out by Geminga’s strong magnetic field, trail the neutron star as it moves about in space. Panel (b) shows how electrically charged particles interact with Geminga’s magnetic field. For example, if electrons (blue) are kicked out by the star, positrons (in red) hit the star’s magnetic poles like in an ‘own goal’. Panel (c) illustrates the size of Geminga’s magnetic field (blue) compared to that of the star itself at the centre (purple). The magnetic field is tilted with respect to Geminga’s rotation axis (red). Panel (d) shows the magnetic poles of Geminga, where charged particles hit the surface of the star, creating a two-million degrees hot spot, a region much hotter than the surroundings. As the star spins on its rotation axis, the hot spot comes into view and then disappears, causing the periodic colour change seen by XMM-Newton. An animated version of the entire sequence can be found at: Click here for animated GIF [low resolution, animated GIF, 5536 KB] Click here for AVI [high resolution, AVI with DIVX compression, 19128 KB] hi-res Size hi-res: 371 kb Credits: ESA, P. Caraveo (IASF, Milan) Geminga's hot spot, panel (a) Panel (a) shows an image taken with the EPIC instrument on board the XMM-Newton observatory. The bright tails, made of

  15. Pasting properties of Tamarind (Tamarindus indica) kernel powder in the presence of Xanthan, Carboxymethylcellulose and Locust bean gum in comparison to Rice and Potato flour.

    Science.gov (United States)

    Kaur, Maninder; Sandhu, Kawaljit Singh; Kaur, Jasmeen

    2013-08-01

    Effects of addition of different levels of gums (xanthan, carboxymethylcellulose and locust bean gum) on the pasting properties of tamarind kernel, potato and rice flour were studied by using Rapid Visco-Analyzer (RVA). Tamarind kernel powder (TKP) varied significantly (P < 0.05) from rice and potato flours with respect to its highest protein, ash and fat contents. The results of RVA analysis indicated that pasting properties of flour/gum mixtures were dependent upon the concentration and type of the gums. Peak, breakdown and final viscosity increased with increase in gum concentration in the flour/gum mixture, but the effect was more pronounced for rice and potato flour than for TKP which showed much lower viscosity responses to all of the gums. Among the three gums studied, the increase in viscosity was significantly higher with addition of locust bean gum followed by xanthan while the lowest was observed with carboxymethylcellulose.

  16. Implications of Partial Conjugation of Whey Protein Isolate to Durian Seed Gum through Maillard Reactions: Foaming Properties, Water Holding Capacity and Interfacial Activity

    Directory of Open Access Journals (Sweden)

    Bahareh Tabatabaee Amid

    2013-12-01

    Full Text Available This paper deals with the conjugation of durian seed gum (DSG with whey protein isolate (WPI through Maillard reactions. Subsequently, the functional properties of durian seed gum in the non-conjugated (control sample and conjugated forms were compared with several commercial gums (i.e., Arabic gum, sodium alginate, kappa carrageenan, guar gum, and pectin. The current study revealed that the conjugation of durian seed gum with whey protein isolate significantly (p < 0.05 improved its foaming properties. In this study, the conjugated durian seed gum produced the most stable foam among all samples. On the other hand, the emulsion stabilized with the conjugated durian seed gum also showed more uniform particles with a larger specific surface area than the emulsion containing the non-conjugated durian seed gum. The conjugated durian seed gum showed significant different foaming properties, specific surface area, particle uniformity and water holding capacity (WHC as compared to the target polysaccharide gums. The conjugated durian seed gum showed more similar functional properties to Arabic gum rather than other studied gums.

  17. Effects of a Baking Soda Gum on extrinsic dental stain: results of a longitudinal 4-week assessment.

    Science.gov (United States)

    Soparkar, P; Newman, M B

    2001-07-01

    An evaluation of the effects of ARM & HAMMER DENTAL CARE The Baking Soda Gum (AHDC) on extrinsic dental stain was made in 48 subjects presenting with measurable extrinsic stain. The subjects were randomized to use either the baking soda gum or a non-baking soda placebo gum for 20 minutes twice daily after lunch and dinner while brushing once daily. The procedure of limited brushing was chosen to simulate the level of hygiene normally practiced by participants entering a clinical study. After 4 weeks, the reduction in measurable extrinsic stain in the baking soda gum group was statistically significant (P = .0044) relative to baseline. Statistical analysis of the placebo gum group revealed no significant change in extrinsic stain from baseline. The magnitude of the unadjusted longitudinal reduction in extrinsic stain in the baking soda gum group was 29.7% at 4 weeks.

  18. Watermarking spot colors in packaging

    Science.gov (United States)

    Reed, Alastair; Filler, TomáÅ.¡; Falkenstern, Kristyn; Bai, Yang

    2015-03-01

    In January 2014, Digimarc announced Digimarc® Barcode for the packaging industry to improve the check-out efficiency and customer experience for retailers. Digimarc Barcode is a machine readable code that carries the same information as a traditional Universal Product Code (UPC) and is introduced by adding a robust digital watermark to the package design. It is imperceptible to the human eye but can be read by a modern barcode scanner at the Point of Sale (POS) station. Compared to a traditional linear barcode, Digimarc Barcode covers the whole package with minimal impact on the graphic design. This significantly improves the Items per Minute (IPM) metric, which retailers use to track the checkout efficiency since it closely relates to their profitability. Increasing IPM by a few percent could lead to potential savings of millions of dollars for retailers, giving them a strong incentive to add the Digimarc Barcode to their packages. Testing performed by Digimarc showed increases in IPM of at least 33% using the Digimarc Barcode, compared to using a traditional barcode. A method of watermarking print ready image data used in the commercial packaging industry is described. A significant proportion of packages are printed using spot colors, therefore spot colors needs to be supported by an embedder for Digimarc Barcode. Digimarc Barcode supports the PANTONE spot color system, which is commonly used in the packaging industry. The Digimarc Barcode embedder allows a user to insert the UPC code in an image while minimizing perceptibility to the Human Visual System (HVS). The Digimarc Barcode is inserted in the printing ink domain, using an Adobe Photoshop plug-in as the last step before printing. Since Photoshop is an industry standard widely used by pre-press shops in the packaging industry, a Digimarc Barcode can be easily inserted and proofed.

  19. [done no pages] An overview on applications of guar gum in food systems to modify structural properties

    Directory of Open Access Journals (Sweden)

    Biljana B. Popova

    2017-01-01

    Full Text Available Polysaccharides define as complex polymers composed of units interlinked with glycosidic bonds originated naturally. Polysaccharides are categorizing in several groups and among them, Gums are those with critical roles in food systems. Guar Gum is imparting softness, emulsification, stabilizing via its addition to formulas. This Gum is a fast soluble in cold water and can be active in a wide range of pH. The aim of this overview is giving an initial concept about guar gum and then convey to an introduction of its applications in food industries.

  20. Matrix Assisted Laser Desorption Ionization Mass Fingerprinting for Identification of Acacia Gum in Microsamples from Works of Art

    DEFF Research Database (Denmark)

    Granzotto, Clara; Sutherland, Ken

    2017-01-01

    to the analysis of naturally aged (∼80 year) gum arabic samples, pure and mixed with lead white pigment, and allowed the detection of gum arabic in samples from a late painting (1949/1954) by Georges Braque in the collection of the Art Institute of Chicago. This first application of the technique to characterize...... to the reproducibility of the gum MS profile, even in the presence of other organic and inorganic components, together with the minimal sample size required, demonstrate the value of this new MALDI-TOF MS method as an analytical tool for the identification of gum arabic in microsamples from museum artifacts....

  1. Microscopic study of gum-metal alloys: A role of trace oxygen for dislocation-free deformation

    International Nuclear Information System (INIS)

    Nagasako, Naoyuki; Asahi, Ryoji; Isheim, Dieter; Seidman, David N.; Kuramoto, Shigeru; Furuta, Tadahiko

    2016-01-01

    A class of Ti–Nb–Ta–Zr–O alloys called gum metal are known to display high strength, low Young's modulus and high elastic deformability up to 2.5%, simultaneously, and considered to deform by a dislocation-free deformation mechanism. A trace of oxygen (∼1%) in gum metal is indispensable to realize such significant properties; however, the detailed mechanism and the role of the oxygen has not been understood. To investigate an effect of trace oxygen included in gum metal, first-principles calculations for gum-metal approximants including zirconium and oxygen are performed. Calculated results clearly indicate that oxygen site with less neighboring Nb atom is energetically favorable, and that Zr–O bonding has an important role to stabilize the bcc structure of gum metal. The three-dimensional atom-probe tomography (3-D APT) measurements for gum metal were also performed to identify compositional inhomogeneity attributed to the trace elements. From the 3-D APT measurements, Zr ions bonding with oxygen ions are observed, which indicates existence of Zr–O nano-clusters in gum metal. Consequently, it is found that (a) coexistence of Zr atom and oxygen atom improves elastical stability of gum metal, (b) inhomogeneous distribution of the compositions induced by the trace elements causes anisotropical change of shear moduli, and (c) Zr–O nano-clusters existing in gum metal are expected to be obstacles to suppress movemen of dislocations.

  2. Beyond the GUM: variance-based sensitivity analysis in metrology

    International Nuclear Information System (INIS)

    Lira, I

    2016-01-01

    Variance-based sensitivity analysis is a well established tool for evaluating the contribution of the uncertainties in the inputs to the uncertainty in the output of a general mathematical model. While the literature on this subject is quite extensive, it has not found widespread use in metrological applications. In this article we present a succinct review of the fundamentals of sensitivity analysis, in a form that should be useful to most people familiarized with the Guide to the Expression of Uncertainty in Measurement (GUM). Through two examples, it is shown that in linear measurement models, no new knowledge is gained by using sensitivity analysis that is not already available after the terms in the so-called ‘law of propagation of uncertainties’ have been computed. However, if the model behaves non-linearly in the neighbourhood of the best estimates of the input quantities—and if these quantities are assumed to be statistically independent—sensitivity analysis is definitely advantageous for gaining insight into how they can be ranked according to their importance in establishing the uncertainty of the measurand. (paper)

  3. Unleashing Empirical Equations with "Nonlinear Fitting" and "GUM Tree Calculator"

    Science.gov (United States)

    Lovell-Smith, J. W.; Saunders, P.; Feistel, R.

    2017-10-01

    Empirical equations having large numbers of fitted parameters, such as the international standard reference equations published by the International Association for the Properties of Water and Steam (IAPWS), which form the basis of the "Thermodynamic Equation of Seawater—2010" (TEOS-10), provide the means to calculate many quantities very accurately. The parameters of these equations are found by least-squares fitting to large bodies of measurement data. However, the usefulness of these equations is limited since uncertainties are not readily available for most of the quantities able to be calculated, the covariance of the measurement data is not considered, and further propagation of the uncertainty in the calculated result is restricted since the covariance of calculated quantities is unknown. In this paper, we present two tools developed at MSL that are particularly useful in unleashing the full power of such empirical equations. "Nonlinear Fitting" enables propagation of the covariance of the measurement data into the parameters using generalized least-squares methods. The parameter covariance then may be published along with the equations. Then, when using these large, complex equations, "GUM Tree Calculator" enables the simultaneous calculation of any derived quantity and its uncertainty, by automatic propagation of the parameter covariance into the calculated quantity. We demonstrate these tools in exploratory work to determine and propagate uncertainties associated with the IAPWS-95 parameters.

  4. Effect of gum arabic in an oral rehydration solution on recovery from diarrhea in rats.

    Science.gov (United States)

    Teichberg, S; Wingertzahn, M A; Moyse, J; Wapnir, R A

    1999-10-01

    It has been shown that gum arabic, a soluble fiber, enhances water, electrolyte, and glucose absorption from oral rehydration solutions in jejunal perfusion of healthy rats and in animals with theophylline-induced secretion or chronic osmotic-secretory diarrhea. This report concerns a study of the effectiveness of an oral rehydration solution supplemented with gum arabic, during recovery from chronic osmotic secretory diarrhea in free-living rats. Chronic diarrhea was induced in 60- to 80-g juvenile rats by providing a magnesium citrate-phenolphthalein solution as the sole fluid source for 7 days. This led to diarrhea characterized by dehydration, soft stools, increased cecal volume, decreased food and fluid intake and failure to gain weight. After 7 days of diarrhea, rats recovered for 24 hours with either tap water or an oral rehydration solution (90 mM Na, 111 mM glucose, 20 mM K, 80 mM chloride, 20 mM citrate) with or without 2.5 g/l gum arabic. Although all three solutions improved the diarrhea, optimal recovery from diarrhea was achieved with the gum arabic-supplemented oral rehydration solution. After 4 hours and 24 hours, rats drinking the gum arabic-supplemented solution gained more weight and had lower fecal output than rats receiving water or the rehydration solution without gum arabic. All three solutions normalized plasma osmolality after 24 hours. The positive effects of the gum arabic-supplemented rehydration solution on fluid and electrolyte absorption seen during jejunal perfusion also occurred during recovery from chronic osmotic secretory diarrhea, when free-living animals drank the solution ad libitum.

  5. Dependence levels in users of electronic cigarettes, nicotine gums and tobacco cigarettes.

    Science.gov (United States)

    Etter, Jean-François; Eissenberg, Thomas

    2015-02-01

    To assess dependence levels in users of e-cigarettes, and compare them with dependence levels in users of nicotine gums and tobacco cigarettes. Self-reports from cross-sectional Internet and mail surveys. Comparisons of: (a) 766 daily users of nicotine-containing e-cigarettes with 30 daily users of nicotine-free e-cigarettes; (b) 911 former smokers who used the e-cigarette daily with 451 former smokers who used the nicotine gum daily (but no e-cigarette); (c) 125 daily e-cigarette users who smoked daily (dual users) with two samples of daily smokers who did not use e-cigarettes (2206 enrolled on the Internet and 292 enrolled by mail from the general population of Geneva). We used the Fagerström test for nicotine dependence, the nicotine dependence syndrome scale, the cigarette dependence scale and versions of these scales adapted for e-cigarettes and nicotine gums. Dependence ratings were slightly higher in users of nicotine-containing e-cigarettes than in users of nicotine-free e-cigarettes. In former smokers, long-term (>3 months) users of e-cigarettes were less dependent on e-cigarettes than long-term users of the nicotine gum were dependent on the gum. There were few differences in dependence ratings between short-term (≤3 months) users of gums or e-cigarettes. Dependence on e-cigarettes was generally lower in dual users than dependence on tobacco cigarettes in the two other samples of daily smokers. Some e-cigarette users were dependent on nicotine-containing e-cigarettes, but these products were less addictive than tobacco cigarettes. E-cigarettes may be as or less addictive than nicotine gums, which themselves are not very addictive. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  6. Oil futures and spot markets

    International Nuclear Information System (INIS)

    Samii, M.V.

    1992-01-01

    In the last decade, the oil futures market has risen to prominence and has become a major factor in influencing oil market psychology and the crude oil market. On a normal day, over 92 thousand contracts, the equivalent of 92 million barrels per day, change hands on the New York Mercantile Exchange, NYMEX. This market has provided a vehicle for hedging against risk. At the same time, it has also created opportunities for speculation. Those who previously were unable to participate in oil market transactions can now become involved through the futures market. The large number of participants in the future market and the availability of information has made this market more efficient and transparent, relative to the crude oil market. While there has been considerable in-depth analysis of other future markets, relatively little theoretical attention has focused on that of oil. This paper looks at the following issues. First, what is the relationship between futures and spot oil prices? And secondly, are futures prices a good predictor of spot crude prices in the future? (author)

  7. Integrating sustainable hunting in biodiversity protection in Central Africa: hot spots, weak spots, and strong spots.

    Directory of Open Access Journals (Sweden)

    John E Fa

    Full Text Available Wild animals are a primary source of protein (bushmeat for people living in or near tropical forests. Ideally, the effect of bushmeat harvests should be monitored closely by making regular estimates of offtake rate and size of stock available for exploitation. However, in practice, this is possible in very few situations because it requires both of these aspects to be readily measurable, and even in the best case, entails very considerable time and effort. As alternative, in this study, we use high-resolution, environmental favorability models for terrestrial mammals (N = 165 in Central Africa to map areas of high species richness (hot spots and hunting susceptibility. Favorability models distinguish localities with environmental conditions that favor the species' existence from those with detrimental characteristics for its presence. We develop an index for assessing Potential Hunting Sustainability (PHS of each species based on their ecological characteristics (population density, habitat breadth, rarity and vulnerability, weighted according to restrictive and permissive assumptions of how species' characteristics are combined. Species are classified into five main hunting sustainability classes using fuzzy logic. Using the accumulated favorability values of all species, and their PHS values, we finally identify weak spots, defined as high diversity regions of especial hunting vulnerability for wildlife, as well as strong spots, defined as high diversity areas of high hunting sustainability potential. Our study uses relatively simple models that employ easily obtainable data of a species' ecological characteristics to assess the impacts of hunting in tropical regions. It provides information for management by charting the geography of where species are more or less likely to be at risk of extinction from hunting.

  8. The Impact of Maltitol-Sweetened Chewing Gum on the Dental Plaque Biofilm Microbiota Composition

    Directory of Open Access Journals (Sweden)

    Bart J. F. Keijser

    2018-03-01

    Full Text Available Background: The oral cavity harbors a complex microbial ecosystem, intimately related to oral health and disease. The use of polyol-sweetened gum is believed to benefit oral health through stimulation of salivary flow and impacting oral pathogenic bacteria. Maltitol is often used as sweetener in food products. This study aimed to establish the in vivo effects of frequent consumption of maltitol-sweetened chewing gum on the dental plaque microbiota in healthy volunteers and to establish the cellular and molecular effects by in vitro cultivation and transcriptional analysis.Results: An intervention study was performed in 153 volunteers, randomly assigned to three groups (www.trialregister.nl; NTR4165. One group was requested to use maltitol gum five times daily, one group used gum-base, and the third group did not use chewing gum. At day 0 and day 28, 24 h-accumulated supragingival plaque was collected at the lingual sites of the lower jaw and the buccal sites of the upper jaw and analyzed by 16S ribosomal rRNA gene sequencing. At day 42, 2 weeks after completion of the study, lower-jaw samples were collected and analyzed. The upper buccal plaque microbiota composition had lower bacterial levels and higher relative abundances of (facultative aerobic species compared to the lower lingual sites. There was no difference in bacterial community structure between any of the three study groups (PERMANOVA. Significant lower abundance of several bacterial phylotypes was found in maltitol gum group compared to the gum-base group, including Actinomyces massiliensis HOT 852 and Lautropia mirabilis HOT 022. Cultivation studies confirmed growth inhibition of A. massiliensis and A. johnsonii by maltitol at levels of 1% and higher. Transcriptome analysis of A. massiliensis revealed that exposure to maltitol resulted in changes in the expression of genes linked to osmoregulation, biofilm formation, and central carbon metabolism.Conclusion: The results showed that

  9. The Impact of Maltitol-Sweetened Chewing Gum on the Dental Plaque Biofilm Microbiota Composition.

    Science.gov (United States)

    Keijser, Bart J F; van den Broek, Tim J; Slot, Dagmar E; van Twillert, Lodewic; Kool, Jolanda; Thabuis, Clémentine; Ossendrijver, Michel; van der Weijden, Fridus A; Montijn, Roy C

    2018-01-01

    Background: The oral cavity harbors a complex microbial ecosystem, intimately related to oral health and disease. The use of polyol-sweetened gum is believed to benefit oral health through stimulation of salivary flow and impacting oral pathogenic bacteria. Maltitol is often used as sweetener in food products. This study aimed to establish the in vivo effects of frequent consumption of maltitol-sweetened chewing gum on the dental plaque microbiota in healthy volunteers and to establish the cellular and molecular effects by in vitro cultivation and transcriptional analysis. Results: An intervention study was performed in 153 volunteers, randomly assigned to three groups (www.trialregister.nl; NTR4165). One group was requested to use maltitol gum five times daily, one group used gum-base, and the third group did not use chewing gum. At day 0 and day 28, 24 h-accumulated supragingival plaque was collected at the lingual sites of the lower jaw and the buccal sites of the upper jaw and analyzed by 16S ribosomal rRNA gene sequencing. At day 42, 2 weeks after completion of the study, lower-jaw samples were collected and analyzed. The upper buccal plaque microbiota composition had lower bacterial levels and higher relative abundances of (facultative) aerobic species compared to the lower lingual sites. There was no difference in bacterial community structure between any of the three study groups (PERMANOVA). Significant lower abundance of several bacterial phylotypes was found in maltitol gum group compared to the gum-base group, including Actinomyces massiliensis HOT 852 and Lautropia mirabilis HOT 022. Cultivation studies confirmed growth inhibition of A. massiliensis and A. johnsonii by maltitol at levels of 1% and higher. Transcriptome analysis of A. massiliensis revealed that exposure to maltitol resulted in changes in the expression of genes linked to osmoregulation, biofilm formation, and central carbon metabolism. Conclusion: The results showed that chewing itself

  10. A SANS study of the adsorption of guar gum on talc surfaces

    International Nuclear Information System (INIS)

    Cram, S.L.; Knott, R.; Hanley, H.

    2002-01-01

    Reagents based on guar gum are commonly used as 'gangue' depressants in the flotation of sulphides from ores containing naturally floating layer silicate minerals such as talc. Nickel sulphide ores processed by WMC Resources Ltd. at the Leinster Nickel Operations in Western Australia typically contain 1-2 % talc. Guar gum, added to the flotation cell, depresses the talc by adsorbing onto its surface, thereby reducing its hydrophobic nature. Guar gum is a long chain polysaccharide containing many hydroxyl functional groups along the length of its chain. The ratio of chain length to the number of hydroxyl and carboxyl groups causes the guar gum to be selective in depressing talc rather than nickel sulphide minerals. Small angle neutron scattering (SANS) it is an excellent tool for probing structures in the nano length scale. Unlike X-rays, neutrons are sensitive to low atomic weight elements, especially hydrogen and therefore organics. Using SANS it is possible to contrast different parts of a composite sample to get information on spatial arrangements. These qualities make SANS an obvious choice for studying the adsorption of guar gum on the surface of talc in aqueous solutions. Complimentary SANS experiments were carried out in Australia at the Australian Nuclear Science and Technology Organisation (ANSTO) and in the United States at the National Institute of Standards and Technology (NIST). Initially talc samples were studied 'as supplied', however as experiments proceeded attempts to reduce the particle size and distribution were carried out by milling and centrifuging procedures. Contrast matching techniques were used to observed the scattering behaviour of talc with and without the presence of guar gum and vice versa, over a total q range of 0.002 - 0.1 Angstroms -1 . The size of the talc particles appears to affect the scattering behaviour not only of talc but also of guar gum in the same solutions. This implies that the structure of the guar gum is strongly

  11. Effect of Different Combinations of Gums and Emulsifiers on the Quality of Bread

    International Nuclear Information System (INIS)

    Haider, M. R.; Din, G. M. U.; Mehmood, A.; Hussain, A.; Nasir, M. U.

    2016-01-01

    A project was designed to evaluate the effect of different combinations of emulsifiers and gums on the quality of bread. Wheat variety AARI-11 was milled to get straight grade flour and mixed with the Emulsifiers (DMG and DATEM) and Gums (G.G and CMC) in a quantity of (0.3- 0.6 %). Both, straight grade flour as well as treated flour (combination with gums and emulsifiers) were subjected to proximate and rheological analysis. Results of the rheological study showed a significant change in water absorption, dough development time, dough stability time and dough viscosity i.e. W/A 61.33-62.93%, D.D.T 3.9-4.8 min, D.S.T 7-9.1 min and 818.33-950.00 BU, respectively. Breads prepared with both flours were also studied for their sensory attributes during storage after the interval of 24 h. The highest score was awarded to T1 (0.3% DATEM and 0.5% guar gum) on the bases of its excellent external attributes (colour of crust, volume, symmetry of form, evenness of bake and crust character) and internal characteristics (aroma, grain, texture, taste, mastication and colour of crumb). After the sensory and physicochemical analyses, it is concluded that with the addition of DATEM (0.3%) and guar gum (0.5%) resulted in good quality of bread. (author)

  12. Chewing gum of antimicrobial decapeptide (KSL) as a sustained antiplaque agent: preformulation study.

    Science.gov (United States)

    Na, Dong Hee; Faraj, Jabar; Capan, Yilmaz; Leung, Kai P; DeLuca, Patrick P

    2005-09-20

    The purpose of this study was to investigate the potential of KSL, an antimicrobial decapeptide, which has been shown to inhibit the growth of oral bacterial strains associated with caries development and plaque formation, to act as an antiplaque agent in a chewing gum formulation. A reversed-phase high-performance liquid chromatography method was developed for KSL and found to be stability-indicating. KSL was stable in acetate buffer at pH 4 and artificial saliva. On the affinity of KSL to tooth-like materials, the KSL showed favorable interaction with hydroxyapatite discs pretreated with human saliva. A chewing gum formulation of KSL was prepared based on conventional procedures and the release of KSL from the gum was studied in vitro using the chewing apparatus and in vivo by a chew-out method. The gum formulations showed promising in vitro/in vivo release profiles, in which 70-80% KSL was released in a sustained manner over 20 min of chewing time. This study suggests that KSL in a gum formulation is suitable for the delivery in the oral cavity, thereby serving as a novel antiplaque agent.

  13. Biosynthesis of xanthan gum by Xanthomonas campestris LRELP-1 using kitchen waste as the sole substrate.

    Science.gov (United States)

    Li, Panyu; Li, Ting; Zeng, Yu; Li, Xiang; Jiang, Xiaolong; Wang, Yabo; Xie, Tonghui; Zhang, Yongkui

    2016-10-20

    Herein, we report the production of xanthan gum by fermentation using kitchen waste as the sole substrate. The kitchen waste was firstly pretreated by a simple hydrolysis method, after which the obtained kitchen waste hydrolysate was diluted with an optimal ratio 1:2. In a 5-L fermentor, the maximum xanthan production, reducing sugar conversion and utilization rates reached 11.73g/L, 67.07% and 94.82%, respectively. The kinetics of batch fermentation was also investigated. FT-IR and XRD characterizations confirmed the fermentation product as xanthan gum. TGA analyses showed that the thermal stability of the xanthan gum obtained in this study was similar to commercial sample. The molecular weights of xanthan gum were measured to be 0.69-1.37×10(6)g/mol. The maximum pyruvate and acetyl contents in xanthan gum were 6.11% and 2.49%, respectively. This study provides a cost-effective solution for the reusing of kitchen waste and a possible low-cost approach for xanthan production. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Gum in apricot (Prunus armeniaca L. shoots induced by methyl jasmonate

    Directory of Open Access Journals (Sweden)

    Marian Saniewski

    2013-12-01

    Full Text Available It has been well known that some fungal pathogens (Monilia laxa, M. fructigena, Cytospora cincta, larvae of Grapholita molesta and plant hormone - ethylene, induce gummosis in apricot shoots. Methyl jasmonate (JA-Me was also found to induce gummosis in apricot shoots as well as biotic and abiotic factors mentioned above. In order to know the mode of action of JA-Me on gum induction and/or formation, chemical composition of polysaccharides (after hydrolysis in gums of apricot shoots induced by JA-Me compared with those by ethephon and their mixture, and naturally occurring ones was studied, resulted in the succesful identification of monosaccharides, and the similarity of a composition consisting of xylose, arabinose and galactose at molar ratio 1:10:14, respectively. These results suggest that beside different inducers of gum in apricot the mechanism of polysaccharides biosynthesis of gums is the same or similar. The physiological role for JA-Me on gum induction and/or formation in apricot shoots, and other species are also discussed.

  15. Chemical and physical properties, safety and application of partially hydrolized guar gum as dietary fiber.

    Science.gov (United States)

    Yoon, Seon-Joo; Chu, Djong-Chi; Raj Juneja, Lekh

    2008-01-01

    The ideal water-soluble dietary fiber for the fiber-enrichment of foods must be very low in viscosity, tasteless, odorless, and should produce clear solutions in beverages. Partially hydrolyzed guar gum (PHGG) produced from guar gum by enzymatic process has the same chemical structure with intact guar gum but less than one-tenth the original molecular length of guar gum, which make available to be used as film former, foam stabilizer and swelling agent. The viscosity of PHGG is about 10 mPa.s in 5% aqueous solution, whereas 1% solution of guar gum shows range from 2,000 to 3,000 mPa.s. In addition, PHGG is greatly stable against low pH, heat, acid and digestive enzyme. For these reasons, PHGG seems to be one of the most beneficial dietary fiber materials. It also showed that interesting physiological functions still fully exert the nutritional function of a dietary fiber. PHGG has, therefore, been used primarily for a nutritional purpose and became fully integrated food material without altering the rheology, taste, texture and color of final products. PHGG named as Benefiber(R) in USA has self-affirmation on GRAS status of standard grade PHGG. PHGG named as Sunfiber(R) is now being used in various beverages, food products and medicinal foods as a safe, natural and functional dietary fiber in all over the world.

  16. Statistical experimental design optimization of rhamsan gum production by Sphingomonas sp. CGMCC 6833.

    Science.gov (United States)

    Xu, Xiao-Ying; Dong, Shu-Hao; Li, Sha; Chen, Xiao-Ye; Wu, Ding; Xu, Hong

    2015-04-01

    Rhamsan gum is a type of water-soluble exopolysaccharide produced by species of Sphingomonas bacteria. The optimal fermentation medium for rhamsan gum production by Sphingomonas sp. CGMCC 6833 was explored definition. Single-factor experiments indicate that glucose, soybean meal, K(2)HPO(4) and MnSO(4) compose the optimal medium along with and initial pH 7.5. To discover ideal cultural conditions for rhamsan gum production in a shake flask culture, response surface methodology was employed, from which the following optimal ratio was derived: 5.38 g/L soybean meal, 5.71 g/L K(2)HPO(4) and 0.32 g/L MnSO(4). Under ideal fermentation rhamsan gum yield reached 19.58 g/L ± 1.23 g/L, 42.09% higher than that of the initial medium (13.78 g/L ± 1.38 g/L). Optimizing the fermentation medium results in enhanced rhamsan gum production.

  17. Effect of time and duration of sorbitol gum chewing on plaque acidogenicity.

    Science.gov (United States)

    Park, K K; Schemehorn, B R; Stookey, G K

    1993-01-01

    Recent data indicate that salivary stimulation by chewing sugarless gum after snacks or meals can reduce the acidogenic potential of foods significantly. The purpose of this study was to determine the optimal initiation time and duration of post-snack salivary stimulation to obtain the maximum benefits of chewing sorbitol gum on reducing the acidogenic potential of starch-containing snacks. An indwelling plaque pH telemetry system was used on five adults in a randomized block design with four starch-containing snacks--pretzels, potato chips, granola bars, and corn chips. Results indicated that salivary stimulation caused by chewing sorbitol gum initiated after 5 min rather than waiting 15 min significantly reduced the acidogenic challenge induced by the snack foods. This study indicates that when the recommendation to chew sugarless gum following food ingestion is used as an adjunct in caries prevention, it should start within 5 min after food ingestion--the sooner the gum chewing is initiated the better--and should continue for at least 15 min to obtain the maximum benefits.

  18. Development of eco-friendly submicron emulsions stabilized by a bio-derived gum.

    Science.gov (United States)

    Pérez-Mosqueda, Luis María; Ramírez, Pablo; Trujillo-Cayado, Luis Alfonso; Santos, Jenifer; Muñoz, José

    2014-11-01

    Many traditional organic solvents are being gradually replaced by ecofriendly alternatives. D-Limonene is a terpenic (bio)-solvent that fulfils the requirements to be considered a green solvent. D-Limonene sub-micron emulsions suffer from Ostwald ripening destabilization. In this study, we examined the influence of the addition of a natural gum (rosin gum) to D-limonene in order to prevent Ostwald ripening. This contribution deals with the study of emulsions formulated with a mixture of D-limonene and rosin gum as dispersed phase and Pluronic PE9400 as emulsifier. The procedure followed for the development of these formulations was based on the application of product design principles. This led to the optimum ratio rosin gum/D-limonene and subsequently to the optimum surfactant concentration. The combination of different techniques (rheology, laser diffraction and multiple light scattering) was demonstrated to be a powerful tool to assist in the prediction of the emulsions destabilization process. Not only did the addition of rosin gum highly increase the stability of these emulsions by inhibiting the Ostwald ripening, but it also reduced the emulsions droplet size. Thus, we found that stable sub-micron D-limonene-in-water emulsions have been obtained in the range 3-6 wt% Pluronic PE-9400 by means of a single-step rotor/stator homogenizing process. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Surface analysis characterisation of gum binders used in modern watercolour paints

    Science.gov (United States)

    Sano, Naoko; Cumpson, Peter J.

    2016-02-01

    Conducting this study has demonstrated that not only SEM-EDX but also XPS can be an efficient tool for characterising watercolour paint surfaces. We find that surface effects are mediated by water. Once the powdered components in the watercolour come into contact with water they dramatically transform their chemical structures at the surface and show the presence of pigment components with a random dispersion within the gum layer. Hence the topmost surface of the paint is confirmed as being composed of the gum binder components. This result is difficult to confirm using just one analytical technique (either XPS or SEM-EDX). In addition, peak fitting of C1s XPS spectra suggests that the gum binder in the commercial watercolour paints is probably gum arabic (by comparison with the reference materials). This identification is not conclusive, but the combination techniques of XPS and SEM shows the surface structure with material distribution of the gum binder and the other ingredients of the watercolour paints. Therefore as a unique technique, XPS combined with SEM-EDX may prove a useful method in the study of surface structure for not only watercolour objects but also other art objects; which may in future help in the conservation for art.

  20. Effects of short-term xylitol gum chewing on the oral microbiome.

    Science.gov (United States)

    Söderling, Eva; ElSalhy, Mohamed; Honkala, Eino; Fontana, Margherita; Flannagan, Susan; Eckert, George; Kokaras, Alexis; Paster, Bruce; Tolvanen, Mimmi; Honkala, Sisko

    2015-03-01

    The aim of this study was to determine the effects of short-term xylitol gum chewing on the salivary microbiota of children. The study was a randomised, controlled, double-blind trial. Healthy children used xylitol chewing gum (xylitol group, n = 35) or sorbitol chewing gum (control group, n = 38) for 5 weeks. The daily dose of xylitol/sorbitol was approximately 6 g/day. At baseline and at the end of the test period, unstimulated and paraffin-stimulated saliva were collected. The microbial composition of the saliva was assessed using human oral microbe identification microarray (HOMIM). Mutans streptococci (MS) were plate cultured. As judged by HOMIM results, no xylitol-induced changes in the salivary microbiota took place in the xylitol group. In the control group, Veillonella atypica showed a significant decrease (p = 0.0001). The xylitol gum chewing decreased viable counts of MS in both stimulated (p = 0.006) and unstimulated (p = 0.002) saliva, but similar effects were also seen in the control group. The use of xylitol gum decreased MS, in general, but did not change the salivary microbial composition. Short-term consumption of xylitol had no impact on the composition of the salivary microbiota, but resulted in a decrease in the levels of MS.

  1. Structure of xanthan gum and cell ultrastructure at different times of alkali stress.

    Science.gov (United States)

    Luvielmo, Márcia de Mello; Borges, Caroline Dellinghausen; Toyama, Daniela de Oliveira; Vendruscolo, Claire Tondo; Scamparini, Adilma Regina Pippa

    2016-01-01

    The effect of alkali stress on the yield, viscosity, gum structure, and cell ultrastructure of xanthan gum was evaluated at the end of fermentation process of xanthan production by Xanthomonas campestris pv. manihotis 280-95. Although greater xanthan production was observed after a 24h-alkali stress process, a lower viscosity was observed when compared to the alkali stress-free gum, regardless of the alkali stress time. However, this outcome is not conclusive as further studies on gum purification are required to remove excess sodium, verify the efficiency loss and the consequent increase in the polymer viscosity. Alkali stress altered the structure of xanthan gum from a polygon-like shape to a star-like form. At the end of the fermentation, early structural changes in the bacterium were observed. After alkali stress, marked structural differences were observed in the cells. A more vacuolated cytoplasm and discontinuities in the membrane cells evidenced the cell lysis. Xanthan was observed in the form of concentric circles instead of agglomerates as observed prior to the alkali stress. Copyright © 2015 Sociedade Brasileira de Microbiologia. Published by Elsevier Editora Ltda. All rights reserved.

  2. Hot spots of mutualistic networks.

    Science.gov (United States)

    Gilarranz, Luis J; Sabatino, Malena; Aizen, Marcelo A; Bascompte, Jordi

    2015-03-01

    Incorporating interactions into a biogeographical framework may serve to understand how interactions and the services they provide are distributed in space. We begin by simulating the spatiotemporal dynamics of realistic mutualistic networks inhabiting spatial networks of habitat patches. We proceed by comparing the predicted patterns with the empirical results of a set of pollination networks in isolated hills of the Argentinian Pampas. We first find that one needs to sample up to five times as much area to record interactions as would be needed to sample the same proportion of species. Secondly, we find that peripheral patches have fewer interactions and harbour less nested networks - therefore potentially less resilient communities - compared to central patches. Our results highlight the important role played by the structure of dispersal routes on the spatial distribution of community patterns. This may help to understand the formation of biodiversity hot spots. © 2014 The Authors. Journal of Animal Ecology © 2014 British Ecological Society.

  3. Cosmicflows-3: Cold Spot Repeller?

    Energy Technology Data Exchange (ETDEWEB)

    Courtois, Hélène M.; Graziani, Romain; Dupuy, Alexandra [University of Lyon, UCB Lyon 1, CNRS/IN2P3, IPN, Lyon (France); Tully, R. Brent [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI 96822 (United States); Hoffman, Yehuda [Racah Institute of Physics, Hebrew University, Jerusalem, 91904 (Israel); Pomarède, Daniel [Institut de Recherche sur les Lois Fondamentales de l’Univers, CEA, Université Paris-Saclay, F-91191 Gif-sur-Yvette (France)

    2017-09-20

    The three-dimensional gravitational velocity field within z ∼ 0.1 has been modeled with the Wiener filter methodology applied to the Cosmicflows-3 compilation of galaxy distances. The dominant features are a basin of attraction and two basins of repulsion. The major basin of attraction is an extension of the Shapley concentration of galaxies. One basin of repulsion, the Dipole Repeller, is located near the anti-apex of the cosmic microwave background dipole. The other basin of repulsion is in the proximate direction toward the “Cold Spot” irregularity in the cosmic microwave background. It has been speculated that a vast void might contribute to the amplitude of the Cold Spot from the integrated Sachs–Wolfe effect.

  4. Effects of oriental sweet gum storax on porcine wound healing.

    Science.gov (United States)

    Ocsel, Hakan; Teke, Zafer; Sacar, Mustafa; Kabay, Burhan; Duzcan, S Ender; Kara, Inci Gokalan

    2012-08-01

    The objective of the present study was to assess the effects of oriental sweet gum (Liquidambar orientalis Mill.) storax on partial-thickness and full-thickness wounds compared to conventional wound dressings in a porcine model. Six young Yorkshire pigs were used. Sixteen square excisional wounds measuring 3 × 3 cm were performed per animal. The wounds were allocated to one of the four treatment modalities: storax, hydrocolloid dressing, silver sulfadiazine, and control groups. Partial-thickness wounds were created in two pigs, and tissue samples were harvested on days 4 and 8, respectively. Full-thickness wounds were created in four pigs, and tissue samples were taken on days 4, 8, 14, and 21, respectively. Histologically, all wounds were examined for re-epithelialization and granulation tissue formation. Tissue hydroxyproline content and wound contraction areas were measured. In storax-applied group, there was a greater depth of granulation tissue at 4 and 8 days compared to all other groups (p < .0125), and there was a faster re-epithelialization at 21 days compared to both hydrocolloid dressing and control groups in full-thickness wounds (p < .0125). Tissue hydroxyproline content and wound contraction did not differ significantly between the groups. The results of this study indicate that topical application of storax enhanced both re-epithelialization and granulation tissue formation in full-thickness wounds. Further studies are indicated in this important area of wound healing research to evaluate the clinical efficacy of this storax and search for the mechanisms that explain its effects.

  5. Evaluation of Blue Gum Chalid Infestation Woodlots in Western Kenya

    International Nuclear Information System (INIS)

    Otuoma, J.; Muchiri, M.N

    2007-01-01

    Blue gum chalcid (BGC) Leptocybe invasa is a gall-forming wasp that belongs to the insect order Hymenoptera, family Eulophidae. It attacks a wide range of Eucalyptus species mostly between the seedling stage and five years of age. BGC causes damage to eucalyptus by forming bump-shaped galls on the leaf midribs, petioles and stems.Twisted and knobbed leaves manifest severe infestation. The aim of this study was to establish the spatial distribution of BGC and extent of host plant damage in Eucalyptus woodlots in Western Kenya. The study was carried out in six permanent sampling plots in Eucalyptus woodlots in Busia, Bungoma, Kakamega and Nyando. Trees were assessed for crown damage by estimating and classifying the density of galls on the leaves into four levels of infestation: low (greater than 50% of foliage canopy with galls and no twisted or knobbed leaves), moderate (greater than 50% of foliage with galls and less than 50% of the leaves twisted and knobbed), high (greater than 50% of the leaves twisted and knobbed, galls on the twigs and some twigs deformed and severe (greater than 50% of the twigs deformed and regeneration foliage observed). An evaluation of the pests' infestation and the extent of host plant damage indicated that, 4% of the trees and severe infestation; 5% high; 20% moderate and 70% low. Approximately 1% of trees died as a result of loss of foliage attributable to severe infestation. Other observations from the study were that the severity of BGC infestation tended to decline as trees grew older and BGC infestation retarded tree growth

  6. Interactions between whey protein isolate and gum Arabic.

    Science.gov (United States)

    Klein, Miri; Aserin, Abraham; Ben Ishai, Paul; Garti, Nissim

    2010-09-01

    In this study we have attempted to understand the nature of "charge interactions" between two negatively charged biopolymers (whey protein isolate, WPI and gum Arabic, GA) and, consequently, why their mixture exhibits better interfacial activity. Surface tension (gamma(0)) measurements indicated that at ca. 1 wt.% of the biopolymer mixture (3:1 wt. ratio) the air/water surface is saturated. At 5 wt.% the gamma(0) of the mixture is lower than the calculated co-operative value. The zeta-potential measurements revealed that the isoelectric point of the WPI:GA 3:1 wt. ratio mixture is 3.8. The zeta-potential values up to pH 6 are below those calculated. Similarly, the electrical conductivities of the mixture are lower than those calculated. All these measurements indicate: (1) partial charge neutralization in spite of the fact that both biopolymers are negative or (2) partial charge-charge interactions between the two biopolymers. The thermal heating behavior of the frozen water in the aqueous mixture studied by DSC (heating cycle of the frozen sample) clearly indicates that the two biopolymers are interacting. We calculated the enthalpy, the free energy and the chemical potential of the interactions. We found that the interactions of the biopolymers are rather weak. They are likely derived from some local positively charged domains (pH 7) on the protein that neutralize some of the negatively charged GA. These interactions form weak charge adducts. These charge adducts are sufficient to improve its adsorption into the oil-water interface and enhance the emulsion stability. Copyright 2010 Elsevier B.V. All rights reserved.

  7. Flattening postprandial blood glucose responses with guar gum: acute effects.

    Science.gov (United States)

    McIvor, M E; Cummings, C C; Leo, T A; Mendeloff, A I

    1985-01-01

    It has been proposed that high-carbohydrate, high-fiber (HCF) diets might serve as useful therapeutic modality in non-insulin-dependent diabetes mellitus (NIDDM). One problem in evaluating clinical trials of this therapy is that, by their very nature, the trials cannot be double blinded. We have developed HCF and placebo granola-type bars using complex absorbable carbohydrate and guar gum fiber to circumvent this methodologic problem. The HCF bars, when consumed with an ad lib. diet, assure an HCF intake without imposing other dietary restrictions. To test the short-term efficacy of the bars, 9 normal adult volunteers, 2 women with impaired glucose tolerance, and 20 patients with NIDDM consumed the bars alone or with meals. Blood glucose responses when HCF bars were consumed alone were blunted when compared with the placebo response (P less than 0.0005 to P less than 0.002), with the most marked suppression occurring in the early postprandial period. In contrast, when the bars were consumed along with breakfast, HCF and placebo responses were virtually identical in the early postprandial period, but showed a progressively greater difference from 90 to 240 min (P less than 0.02 to P less than 0.0005). When consumed with lunch as well as breakfast, the HCF bars caused flattening of blood glucose responses during the late postprandial period after breakfast and maintained flattened responses during the early and late postprandial periods after lunch (P less than 0.05 to P less than 0.005). It is concluded that these HCF bars can be used to blunt postprandial blood glucose responses, in subjects with either normal or abnormal carbohydrate metabolism.

  8. Chewing gum for postoperative recovery of gastrointestinal function.

    Science.gov (United States)

    Short, Vaneesha; Herbert, Georgia; Perry, Rachel; Atkinson, Charlotte; Ness, Andrew R; Penfold, Christopher; Thomas, Steven; Andersen, Henning Keinke; Lewis, Stephen J

    2015-02-20

    Ileus commonly occurs after abdominal surgery, and is associated with complications and increased length of hospital stay (LOHS). Onset of ileus is considered to be multifactorial, and a variety of preventative methods have been investigated. Chewing gum (CG) is hypothesised to reduce postoperative ileus by stimulating early recovery of gastrointestinal (GI) function, through cephalo-vagal stimulation. There is no comprehensive review of this intervention in abdominal surgery. To examine whether chewing gum after surgery hastens the return of gastrointestinal function. We searched the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE (via Ovid), MEDLINE (via PubMed), EMBASE (via Ovid), CINAHL (via EBSCO) and ISI Web of Science (June 2014). We hand-searched reference lists of identified studies and previous reviews and systematic reviews, and contacted CG companies to ask for information on any studies using their products. We identified proposed and ongoing studies from clinicaltrials.gov, World Health Organization (WHO) International Clinical Trials Registry Platform and metaRegister of Controlled Trials. We included completed randomised controlled trials (RCTs) that used postoperative CG as an intervention compared to a control group. Two authors independently collected data and assessed study quality using an adapted Cochrane risk of bias (ROB) tool, and resolved disagreements by discussion. We assessed overall quality of evidence for each outcome using Grades of Recommendation, Assessment, Development and Evaluation (GRADE). Studies were split into subgroups: colorectal surgery (CRS), caesarean section (CS) and other surgery (OS). We assessed the effect of CG on time to first flatus (TFF), time to bowel movement (TBM), LOHS and time to bowel sounds (TBS) through meta-analyses using a random-effects model. We investigated the influence of study quality, reviewers' methodological estimations and use of Enhanced Recovery After Surgery (ERAS

  9. Self-perceived mouthfeel and physico-chemical surface effects after chewing gums containing sorbitol and Magnolia bark extract

    NARCIS (Netherlands)

    Wessel, Stefan W.; van der Mei, Henny C.; Slomp, Anje M.; van de Belt-Gritter, Betsy; Dodds, Michael W. J.; Busscher, Henk J.

    2017-01-01

    The European Food Safety Authority recognizes the contribution of sugar-free chewing gum to oral health through increased salivation, clearance of food debris, and neutralization of biofilm pH. Magnolia bark extract is a gum additive shown to reduce the prevalence of bad-breath bacteria but its

  10. Front and Back Face Gum Yields from 2,4-D and H2SO4 Treatments on Slash Pine

    Science.gov (United States)

    Ralph W. Clements

    1970-01-01

    A 2-percent water soluble solution of 2,4-D was as effective as 50-percent H2SO4 for stimulating gum flow from slash pine in stands of natural reproduction. In the 4-year study reported here, there was no appreciable difference in gum yields for zny one year of work, for either front or back faces, and for the...

  11. Randomized clinical trial of the effect of gum chewing on postoperative ileus and inflammation in colorectal surgery

    NARCIS (Netherlands)

    van den Heijkant, T. C.; Costes, L. M. M.; van der Lee, D. G. C.; Aerts, B.; Osinga-de Jong, M.; Rutten, H. R. M.; Hulsewé, K. W. E.; de Jonge, W. J.; Buurman, W. A.; Luyer, M. D. P.

    2015-01-01

    Postoperative ileus (POI) is a common complication following colorectal surgery that delays recovery and increases length of hospital stay. Gum chewing may reduce POI and therefore enhance recovery after surgery. The aim of the study was to evaluate the effect of gum chewing on POI, length of

  12. Dryland resources, livelihoods and institutions : diversity and dynamics in use and management of gum and resin trees in Ethiopia

    NARCIS (Netherlands)

    Teshale Woldeamanuel Habebo, Teshale

    2011-01-01

    Dry woodlands comprise the largest forest resources in Ethiopia. An important feature of these forests is their richness in Acacia, Boswellia and Commiphora (ABC) species that produce gum and resin. Gums/resins significantly contribute to rural livelihoods, the national economy, and ecosystem

  13. Comparative viscoelasticity studies: Corn fiber gum versus commercial polysaccharide emulsifiers in bulk and at air/liquid interfaces

    Science.gov (United States)

    A comparative study of both the bulk and air/liquid interfacial rheological responses was carried out by using four kinds of high molecular weight and highly branched polysaccharide emulsifiers, (a) corn fiber gum (CFG), (b) octenyl succinate anhydride-modified starch (OSA-s), (c) gum arabic (GA) an...

  14. Influence of xanthan, guar, CMC and gum acacia on functional properties of water chestnut (Trapa bispinosa) starch.

    Science.gov (United States)

    Lutfi, Zubala; Nawab, Anjum; Alam, Feroz; Hasnain, Abid; Haider, Syed Zia

    2017-10-01

    This study was performed to determine the effect of xanthan, guar, CMC and gum acacia on functional and pasting properties of starch isolated from water chestnut (Trapa bispinosa). Morphological properties of water chestnut starch with CMC were studied by scanning electron microscopy (SEM). The addition of hydrocolloids significantly enhanced the solubility of water chestnut starch (WCS) while reduced swelling power and freeze-thaw stability. The hydrophilic tendency of WCS was increased by xanthan gum; however, with addition of gum acacia it decreased significantly. Starch was modified with guar and gum acacia exhibited highest% syneresis. Guar gum was found to be effective in increasing the clarity of water chestnut starch paste. The addition of CMC significantly reduced the pasting temperature of WCS indicating ease of gelatinization. The setback was accelerated in the presence of xanthan gum but gum acacia delayed this effect during the cooling of the starch paste. Only xanthan gum was found to be effective in increasing breakdown showing good paste stability of WCS. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Mutanase-containing chewing gum: A new potential approach for prevention of dental caries

    Directory of Open Access Journals (Sweden)

    Jafar Kolahi

    2013-01-01

    Full Text Available Introduction: Study on the effect of topically applied mutanase on plaque formation and caries in rats showed strong inhibition of dental caries. Furthermore, it has been shown that the presence of mutanase in dental plaque may affect the synthesis and structure of sticky, extracellular glucans. The Hypothesis: Mutanase can be easily added to gum base. After chewing of mutanase-containing chewing gum, the enzyme will be released into the oral cavity. Mutanase will hydrolyze sticky, extracellular glucans, e.g., mutan inhibiting cariogenic bacteria to cohere/adhere and form plaque. Evaluation of the Hypothesis: The main challenge with this hypothesis is the source of mutanase. It can be obtained from Paenibacillus sp. MP-1 or Trichoderma harzianum F-340. Directly compressible medicated chewing gum bases can be used to avoid inactivation of mutanase during the manufacturing process.

  16. Preliminary study on aluminum-air battery applying disposable soft drink cans and Arabic gum polymer

    Science.gov (United States)

    Alva, S.; Sundari, R.; Wijaya, H. F.; Majlan, E. H.; Sudaryanto; Arwati, I. G. A.; Sebayang, D.

    2017-09-01

    This study is in relation to preliminary investigation of aluminium-air battery using disposable soft drink cans as aluminium source for anode. The cathode uses commercial porous carbon sheet to trap oxygen from air. This work applies a commercial cashing to place carbon cathode, electrolyte, Arabic gum polymer, and aluminium anode in a sandwich-like arrangement to form the aluminium-air battery. The Arabic gum as electrolyte polymer membrane protects anode surface from corrosion due to aluminium oxide formation. The study result shows that the battery discharge test using constant current loading of 0.25 mA yields battery capacity of 0.437 mAh with over 100 minute battery life times at 4M NaOH electrolyte and 20 % Arabic gum polymer as the best performance in this investigation. This study gives significant advantage in association with beneficiation of disposable soft drink cans from municipal solid waste as aluminium source for battery anode.

  17. Effect of xanthan gum on the release of strawberry flavor in formulated soy beverage.

    Science.gov (United States)

    Xu, Jiao; He, Zhiyong; Zeng, Maomao; Li, Bingbing; Qin, Fang; Wang, Linxiang; Wu, Shengfang; Chen, Jie

    2017-08-01

    The effects of xanthan gum on the release of strawberry flavor compounds in formulated soy protein isolate (SPI) beverage were investigated by headspace gas chromatography (GC). Seven strawberry flavor compounds (limonene, ethyl hexanoate, (Z)-3-hexenyl acetate, ethyl 2-methylbutanoate, ethyl butanoate, (Z)-3-hexen-1-ol and diacetyl) could be detected by GC and hence analyzed the gas-matrix partition coefficients (K). The release of flavor compounds was restrained in SPI and/or xanthan gum solution. The retention of (Z)-3-hexen-1-ol, limonene and diacetyl significantly changed (pfuraneol) accelerated the release of ester compounds to some extent in different matrices. The above results demonstrated that presence of SPI and xanthan gum could bring about an imbalance in the strawberry flavor. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Acacia gum polysaccharide based hydrogel wound dressings: Synthesis, characterization, drug delivery and biomedical properties.

    Science.gov (United States)

    Singh, Baljit; Sharma, Sushma; Dhiman, Abhishek

    2017-06-01

    Keeping in view the importance of polysaccharide gums for wound care, in the present article, an attempt has been made to explore antioxidant nature of gum acacia in designing hydrogel wound dressing to improve its wound healing potential. These polymers were prepared by using acacia gum-polyvinylpyrollidone/carbopol and were characterized by 13 C NMR, FTIR, SEM, AFM, cryo-SEM, XRD, TGA, DSC and elemental analysis techniques. Some important biomaterial properties of wound dressings such as wound fluid absorption, haemo-compatibility, bioactive assessment, gaseous/water/microbial permeability, mechanical properties, bio-adhesion, drug release, and histology of wound healing were also determined. Hydrogel wound dressings were found non-haemolytic, antioxidant and mucoadhesive in nature. Release of drug occurred through non-Fickian diffusion mechanism and release profile best fitted in Higuchi model. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Hot Spot Removal System: System description

    International Nuclear Information System (INIS)

    1997-09-01

    Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System''s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section

  20. Preparation and characterization of cross-linked excipient of coprocessed xanthan gum-acacia gum as matrix for sustained release tablets

    Science.gov (United States)

    Surini, Silvia; Wati, Dina Risma; Syahdi, Rezi Riadhi

    2018-02-01

    Sustained release tablet is solid dosage form which is designed to release drugs slowly in the body. This research was intended to prepare and characterize the cross-linked excipients of co-processed xanthan gum-acacia gum (CL-Co-XGGA) as matrices for sustained release tablets with gliclazide as a model drug. CL-Co-XGGA excipients were cross-linked materials of co-processed excipients of xanthan gum-acacia gum (Co-XGGA) using sodium trimetaphosphate. Co-processed excipients of xanthan gum-acacia gum were prepared in the ratio of each excipient 1:2, 1:1 and 2:1. Co-XGGA and CL-Co-XGGA excipients were characterized physically, chemically and functionally. Then, the sustained release (SR) tablets were formulated by wet granulation method using CL-Co-XGGA excipients as matrices. Also, the dissolution study of the gliclazide SR tablets was carried out in phosphate buffer medium pH 7,4 containing sodium lauryl sulphate 0.2% for 12 hours. The results showed that the degree of substitution (DS) of CL-Co-XGGA 1:2, 1:1, 2:1 excipients were respectively 0.067, 0.082 and 0.08. Besides that, the excipients gel strengths were 14.03, 17.27 and 20,70 gF, respectively. The cross-linked excipients had improved flow properties and swelling capability compared to the Co-XGGA excipients. The results of the gliclazide SR tablets evaluations showed that all tablets were passed all tablet requirements. Moreover, the gliclazide release from SR tablets F1 - F6 revealed the sustained release profile, which was following zero order kinetics (F1, F2, F3, F6) and Higuchi kinetics (F4 and F5). It could be concluded that the obtained CL-Co-XGGA excipients might be used as matrices for sustained release tablets and could retard drug release up to 8 until 32 hours.

  1. 7 CFR 28.415 - Low Middling Light Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Low Middling Light Spotted Color. 28.415 Section 28... Spotted Color. Low Middling Light Spotted Color is color which in spot or color, or both, is between Low Middling Color and Low Middling Spotted Color. ...

  2. 7 CFR 28.411 - Good Middling Light Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Good Middling Light Spotted Color. 28.411 Section 28... Light Spotted Color. Good Middling Light Spotted Color is color which in spot or color, or both, is between Good Middling Color and Good Middling Spotted Color. ...

  3. 7 CFR 28.413 - Middling Light Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Middling Light Spotted Color. 28.413 Section 28.413... Spotted Color. Middling Light Spotted Color is color which in spot or color, or both, is between Middling Color and Middling Spotted Color. ...

  4. 7 CFR 28.412 - Strict Middling Light Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Strict Middling Light Spotted Color. 28.412 Section 28... Light Spotted Color. Strict Middling Light Spotted Color is color which in spot or color, or both, is between Strict Middling Color and Strict Middling Spotted Color. ...

  5. Natural gums as sustained release carriers: development of gastroretentive drug delivery system of ziprasidone HCl

    Directory of Open Access Journals (Sweden)

    AJ Rajamma

    2012-10-01

    Full Text Available Abstract Background Objective of this study is to show the potential use of natural gums in the development of drug delivery systems. Therefore in this work gastro retentive tablet formulations of ziprasidone HCl were developed using simplex lattice design considering concentration of okra gum, locust bean gum and HPMC K4M as independent variables. A response surface plot and multiple regression equations were used to evaluate the effect of independent variables on hardness, flag time, floating time and drug release for 1 h, 2 h, and 8 h and for 24 h. A checkpoint batch was also prepared by considering the constraints and desirability of optimized formulation to improve its in vitro performance. Significance of result was analyzed using ANOVA and p was considered statistically significant. Results Formulation chiefly contains locust bean gum found to be favorable for hardness and floatability but combined effect of three variables was responsible for the sustained release of drug. The in vitro drug release data of check point batch (F8 was found to be sustained well compared to the most satisfactory formulation (F7 of 7 runs. The ‘n’ value was found to be between 0.5 and 1 suggesting that release of drug follows anomalous (non-fickian diffusion mechanism indicating both diffusion and erosion mechanism from these natural gums. Predicted results were almost similar to the observed experimental values indicating the accuracy of the design. In vivo floatability test indicated non adherence to the gastric mucosa and tablets remain buoyant for more than 24 h. Conclusions Study showed these eco-friendly natural gums can be considered as promising SR polymers.

  6. The Association of Gum Bleeding with Respiratory Health in a Population Based Study from Northern Europe.

    Directory of Open Access Journals (Sweden)

    Francisco Gómez Real

    Full Text Available There is little knowledge about how oral and respiratory health is interrelated even though the mucosa of the oral cavity and airways constitutes a continuum and the exposures to these are partly similar.To investigate whether gum bleeding is related to asthma, respiratory symptoms and self-reported COPD.A postal questionnaire including questions about respiratory and oral health was sent to general population samples in seven Northern European centres. In 13,409 responders, gum bleeding when brushing teeth was reported always/often by 4% and sometimes by 20%. Logistic regressions accounted for age, smoking, educational level, centre and gender. Effects of BMI, cardio-metabolic diseases, early life factors, gastro-oesophageal reflux, dental hygiene, nasal congestion, and asthma medication were addressed.Gum bleeding always/often was significantly associated with ≥ 3 asthma symptoms (OR 2.58, 95% CI 2.10-3.18, asthma (1.62 [1.23-2.14] and self-reported COPD (2.02 [1.28-3.18]. There was a dose-response relationship between respiratory outcomes and gum bleeding frequency (≥ 3 symptoms: gum bleeding sometimes 1.42 [1.25-1.60], often/always 2.58 [2.10-3.18], and there was no heterogeneity between centres (p(heterogeneity = 0.49. None of the investigated risk factors explained the associations. The observed associations were significantly stronger among current smokers (p(interaction = 0.004.A consistent link between gum bleeding and obstructive airways disease was observed, not explained by common risk factors or metabolic factors. We speculate that oral pathogens might have unfavourable impact on the airways, and that the direct continuity of the mucosa of the oral cavity and the airways reflects a pathway that might provide novel opportunities for interventions.

  7. Effect of CMC and arabic gum in the manufacture of jackfruit velva (Artocarpus heterophyllus)

    Science.gov (United States)

    Yudhistira, B.; Riyadi, N. H.; Pangestika, A. D.; Pertiwi, S. R.

    2018-03-01

    Velva is one type of frozen dessert which is made from fruit/vegetable with ice cream maker, low fat and high fiber content. Jackfruit is a raw material for the manufacture of velva because of the high fiber content of 2.31 gr. The use of a stabilizers combination of CMC and arabic gum in the manufacture of velva will provide a better gel mix than single use. The purpose of this research is to know the influence of variation of CMC and arabic gum stabilizer on the characteristics (physical, chemical, and sensory) of jackfruit velva (Artocarpus heterophyllus) and determine variations in the most appropriate combinations of stabilizers to produce jackfruit velva with the best quality. This research applied Completely Randomized Design consist of one factor which is the combination of CMC and arabic gum levels in the making of jackfruit velva with two replicates and two replications of the analysis. The data obtained then analyzed statistically using one way analysis of variance (ANOVA), when there is a significant difference, then followed by Duncan’s Multiple Range Test (DMRT) at significance level of 0.05. The results of this study concluded that the jackfruit velva with the addition of various concentrations of CMC and arabic gum is significantly affecting the taste, texture and overall parameters, but no significant difference on the color and flavor parameters of jackfruit velva. Based on the results of physical characteristics, chemical and sensory jackfruit velva with the addition of a stabilizing concentration of CMC and arabic gum 1: 1 result in best jackfruit velva. The best jackfruit velva with stabilizing the concentration of CMC and arabic gum 1: 1 contains a water content of 61.95%, dietary fiber 2.231%, total dissolved solids 20.38 °Brix, overrun 19.709%, meltdown 28.215 minutes. As for the color attribute score 3.72; Taste 4; flavor 3.60; Texture 3.68, and overall 3.88.

  8. Effects of sugar-free chewing gum sweetened with xylitol or maltitol on the development of gingivitis and plaque: a randomized clinical trial

    NARCIS (Netherlands)

    Keukenmeester, R.S.; Slot, D.E.; Rosema, N.A.M.; van Loveren, C.; van der Weijden, G.A.

    2014-01-01

    Objective The objective of this study was to test the effect of sugar-free chewing gum sweetened with xylitol or maltitol compared to the use of a gum base or no gum on gingivitis and plaque scores under both brushing and non-brushing circumstances. Methods The design of the study was a four-group,

  9. Development and Antibacterial Activity of Cashew Gum-Based Silver Nanoparticles

    Science.gov (United States)

    Quelemes, Patrick V.; Araruna, Felipe B.; de Faria, Bruna E. F.; Kuckelhaus, Selma A. S.; da Silva, Durcilene A.; Mendonça, Ronaldo Z.; Eiras, Carla; dos S. Soares, Maria José; Leite, José Roberto S. A.

    2013-01-01

    The present study describes the development of a green synthesis of silver nanoparticles reduced and stabilized by exuded gum from Anacardium occidentale L. and evaluates in vitro their antibacterial and cytotoxic activities. Characterization of cashew gum-based silver nanoparticles (AgNPs) was carried out based on UV–Vis spectroscopy, transmission electron microscopy and dynamic light scattering analysis which revealed that the synthesized silver nanoparticles were spherical in shape, measuring about 4 nm in size with a uniform dispersal. AgNPs presented antibacterial activity, especially against Gram-negative bacteria, in concentrations where no significant cytotoxicity was observed. PMID:23455467

  10. Development and Antibacterial Activity of Cashew Gum-Based Silver Nanoparticles

    Directory of Open Access Journals (Sweden)

    Maria José dos S. Soares

    2013-03-01

    Full Text Available The present study describes the development of a green synthesis of silver nanoparticles reduced and stabilized by exuded gum from Anacardium occidentale L. and evaluates in vitro their antibacterial and cytotoxic activities. Characterization of cashew gum-based silver nanoparticles (AgNPs was carried out based on UV–Vis spectroscopy, transmission electron microscopy and dynamic light scattering analysis which revealed that the synthesized silver nanoparticles were spherical in shape, measuring about 4 nm in size with a uniform dispersal. AgNPs presented antibacterial activity, especially against Gram-negative bacteria, in concentrations where no significant cytotoxicity was observed.

  11. A study of guar seed and guar gum properties (Cyamopsis tetragonolabous)

    International Nuclear Information System (INIS)

    Eldaw, Ganal Elawad

    1998-06-01

    Guar seed components of three genotypes (HFG53, HFG182, HFG363), are hull (13.4-14%), germ (43.3-44.2%) and endosperm (36.0-40%). The proximate composition of guar seed in mean values is moisture (11.3±0.01%), crude protein (29.10±0.01%), crude fat (1.58±0.01%), crude fibre (9.01±0.01%) and carbohydrates by difference. The endosperm analysis showed mean values for moisture (6.18±0.03%), ash (1.35±0.03%), crude protein (4.41±0.0%), crude fat (0.30±0.0%), crude fibre (1.55±0.01%) and carbohydrates (0.41±0.04%). The micro and macro-elements quantities of the endosperm of the three genotypes are as follows: Zn (29-44 mg/kg), fe (52-112 mg/kg), Cu (2.6-3.8 mg/kg), Pb (0.34-0.38 mg/kg) and As (0.24 mg/kg), Na (0.1-0.5%), K (0.70-0.95%), Ca (0.30-0.37%) and Mg (0.11%), respectively. The micro and macro elements of germ and hull are also reported in this study. The Ost wald relative viscosity of guar gum behave Newtonian up to 0.5% mg/ml. The relative viscosity linear curves have high coefficient of correlation (r=0.87, 0.82-1.05, and 0.99) for gum of endosperm, respectively. Redwood measures kinematic viscosity of guar gum for the three genotypes at varying temperatures 40-80 degree. Heat stability of HFG53 is the best among the three genotypes guar gum. the high contamination in gum lowered the heat stability of the three genotypes. Brookfield method shows a high rate of dispersability for HFG363 followed by HFG182 and HFG53. The comparative study of the effect of purification on guar gum viscosities measured by Ostwald within the three genotypes show high coefficient of correlation. The influence of salt concentration 1.0, 1.5 and 2.0% on heat stability of commercial guar gum show high viscosities. Sugar influence in heated guar gum solution 0.5% (200 mesh) gives a high viscosity increase than 80 mesh with 5, 10 and 15% added sugar. The effect of combined salt-sugar on commercial guar gives increased viscosity than the control

  12. Studi Perbandingan Nenas dan Kangkung dengan Konsentrasi Gum Arab terhadap Mutu Fruit Leather

    OpenAIRE

    Lubis, Suchi Andriani Maqfirah

    2015-01-01

    The aim of this research was to find the effect of ratio pineapplepulps and water spinach with several arabic gum concentration on the quality of pineapple and water spinach mixture fruit leather. This research was conducted at the Laboratory of Food Technology, Faculty of Agriculture, University of Sumatera Utara, Medan, using completely randomized design with two factors, i.e. :ratio of pineapple and water spinachpulps (P) : (70%:30% ; 60%:40% ; 50%:50% ; 40%:60% ; 30%:70%) and arabic gum c...

  13. Chronotherapeutic drug delivery of Tamarind gum, Chitosan and Okra gum controlled release colon targeted directly compressed Propranolol HCl matrix tablets and in-vitro evaluation.

    Science.gov (United States)

    Newton, A M J; Indana, V L; Kumar, Jatinder

    2015-08-01

    The main objective of this investigation is to develop a chronotherapeutic drug delivery of various natural polymers based colon targeted drug delivery systems to treat early morning sign in BP. The polymers such as Tamarind gum, Okra gum and Chitosan were used in the formulation design. A model drug Propranolol HCl was incorporated in the formulation in order to assess the controlled release and time dependent release potential of various natural polymers. A novel polymer Tamarind gum was extracted and used as a prime polymer in this study to prove the superiority of this polymer over other leading natural polymer. Propranolol HCl was used as a model drug which undergoes hepatic metabolism and witnesses the poor bioavailability. The matrix tablets of Propranolol HCl were prepared by direct compression. The tablets were evaluated for various quality control parameters and found to be within the limits. Carbopol 940 was used as an auxiliary polymer to modify the drug release and physicochemical characteristics of the tablets. The in vitro release studies were performed in 0.1N HCl for 1.5h, followed by pH 6.8 phosphate buffer for 2h and pH 7.4 phosphate buffer till maximum amount of drug release. The in vitro release profile of the formulations were fitted with various pharmacokinetic mathematical models and analyzed for release profile. The formulations prepared with Tamarind gum prolonged the release for an extended period of time compared to other polymer based formulation and showed an excellent compression characteristic. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. Antiplaque efficacy of tooth and gums tonic, Hiora-GA gel, and Spirogyl Gum Paint in comparison with chlorhexidine M gel: A double-blind randomized control trial

    Directory of Open Access Journals (Sweden)

    Jagadeeswara Rao Sukhabogi

    2017-01-01

    Full Text Available Objective: To compare the efficacy of three different herbal products (Tooth and Gums Tonic, Hiora-GA gel, and Spirogyl Gum paint in reducing plaque, gingival inflammation and bacterial count in comparison with chlorhexidine M gel among participants with moderate to severe periodontitis. Materials and Methods: A total of eighty participants with moderate to severe periodontitis were initially recruited after obtaining their informed consent. All participants were offered scaling and polishing on the first visit to remove visible calculus. Then, these participants were randomly divided into four groups of twenty participants each using block randomization method. Participants in Group 1, 2, 3, and 4 were given chlorhexidine M gel, Hiora-GA gel, Spirogyl Gum paint, and Tooth and Gums Tonic, respectively. All participants were instructed to brush their teeth twice day with a soft bristled toothbrush and their regular fluoridated toothpaste. They were instructed to apply the respective gels twice a day according to the manufacturer's guidelines. The posttreatment follow-up examinations for gingival and plaque changes were assessed after 30, 60, and 90 days by three trained and calibrated investigators using gingival and plaque index. The investigators and statistician were blind about group allocation. The supragingival plaque samples were collected before and 90 days after treatment from the buccal surfaces of maxillary right first permanent molar of each participant for microbial analysis. Results: The mean plaque, gingival scores significantly decreased at different intervals following intervention in all groups. The bacterial counts also significantly reduced postintervention with no significant difference in the efficacy of these products compared to chlorhexidine. Conclusion: All three herbal products were found to be effective when used along with oral prophylaxis. Hence, they can all be used as alternates to chlorhexidine in the management

  15. Antiplaque Efficacy of Tooth and Gums Tonic, Hiora-GA Gel, and Spirogyl Gum Paint in Comparison with Chlorhexidine M Gel: A Double-blind Randomized Control Trial.

    Science.gov (United States)

    Sukhabogi, Jagadeeswara Rao; Shekar, B R Chandra; Ramana, I Venkata; Yadav, Sarjeev Singh; Kumar, G Satish; Harita, N

    2017-01-01

    To compare the efficacy of three different herbal products (Tooth and Gums Tonic, Hiora-GA gel, and Spirogyl Gum paint) in reducing plaque, gingival inflammation and bacterial count in comparison with chlorhexidine M gel among participants with moderate to severe periodontitis. A total of eighty participants with moderate to severe periodontitis were initially recruited after obtaining their informed consent. All participants were offered scaling and polishing on the first visit to remove visible calculus. Then, these participants were randomly divided into four groups of twenty participants each using block randomization method. Participants in Group 1, 2, 3, and 4 were given chlorhexidine M gel, Hiora-GA gel, Spirogyl Gum paint, and Tooth and Gums Tonic, respectively. All participants were instructed to brush their teeth twice day with a soft bristled toothbrush and their regular fluoridated toothpaste. They were instructed to apply the respective gels twice a day according to the manufacturer's guidelines. The posttreatment follow-up examinations for gingival and plaque changes were assessed after 30, 60, and 90 days by three trained and calibrated investigators using gingival and plaque index. The investigators and statistician were blind about group allocation. The supragingival plaque samples were collected before and 90 days after treatment from the buccal surfaces of maxillary right first permanent molar of each participant for microbial analysis. The mean plaque, gingival scores significantly decreased at different intervals following intervention in all groups. The bacterial counts also significantly reduced postintervention with no significant difference in the efficacy of these products compared to chlorhexidine. All three herbal products were found to be effective when used along with oral prophylaxis. Hence, they can all be used as alternates to chlorhexidine in the management of periodontal diseases.

  16. HUBBLE FINDS NEW DARK SPOT ON NEPTUNE

    Science.gov (United States)

    2002-01-01

    NASA's Hubble Space Telescope has discovered a new great dark spot, located in the northern hemisphere of the planet Neptune. Because the planet's northern hemisphere is now tilted away from Earth, the new feature appears near the limb of the planet. The spot is a near mirror-image to a similar southern hemisphere dark spot that was discovered in 1989 by the Voyager 2 probe. In 1994, Hubble showed that the southern dark spot had disappeared. Like its predecessor, the new spot has high altitude clouds along its edge, caused by gasses that have been pushed to higher altitudes where they cool to form methane ice crystal clouds. The dark spot may be a zone of clear gas that is a window to a cloud deck lower in the atmosphere. Planetary scientists don t know how long lived this new feature might be. Hubble's high resolution will allow astronomers to follow the spot's evolution and other unexpected changes in Neptune's dynamic atmosphere. The image was taken on November 2, 1994 with Hubble's Wide Field Planetary Camera 2, when Neptune was 2.8 billion miles (4.5 billion kilometers) from Earth. Hubble can resolve features as small as 625 miles (1,000 kilometers) across in Neptune's cloud tops. Credit: H. Hammel (Massachusetts Institute of Technology) and NASA

  17. Pink Spot - Literature Review and Case Report.

    Science.gov (United States)

    Petel, Roy; Fuks, Anna

    Pink spots in teeth were first described by Mummery in 1920, and were related to resorption. Resorption is a pathologic process that often eludes the clinician with its varied etiologic factors and diverse clinical presentations. Resorption can be generally classified as internal and external resorption. Internal resorption has been described as a rare occurrence as compared to external resorption. This article describes a pink spot that was diagnosed as a progressing resorption process. Early diagnosis enabled a successful management of the lesion. Early diagnosis and treatment of an internal resorption, clinically seen as a pink spot, in a primary central incisor may prevent its fast progress and subsequent loss.

  18. Want to block earworms from conscious awareness? B(u)y gum!

    Science.gov (United States)

    Beaman, C Philip; Powell, Kitty; Rapley, Ellie

    2015-01-01

    Three experiments examine the role of articulatory motor planning in experiencing an involuntary musical recollection (an "earworm"). Experiment 1 shows that interfering with articulatory motor programming by chewing gum reduces both the number of voluntary and the number of involuntary-unwanted-musical thoughts. This is consistent with other findings that chewing gum interferes with voluntary processes such as recollections from verbal memory, the interpretation of ambiguous auditory images, and the scanning of familiar melodies, but is not predicted by theories of thought suppression, which assume that suppression is made more difficult by concurrent tasks or cognitive loads. Experiment 2 shows that chewing the gum affects the experience of "hearing" the music and cannot be ascribed to a general effect on thinking about a tune only in abstract terms. Experiment 3 confirms that the reduction of musical recollections by chewing gum is not the consequence of a general attentional or dual-task demand. The data support a link between articulatory motor programming and the appearance in consciousness of both voluntary and unwanted musical recollections.

  19. Enhanced transport of zerovalent iron nanoparticles in saturated porous media by guar gum

    International Nuclear Information System (INIS)

    Tiraferri, Alberto; Sethi, Rajandrea

    2009-01-01

    In order to ensure adequate mobility of zerovalent iron nanoparticles in natural aquifers, the use of a stabilizing agent is necessary. Polymers adsorbed on the nanoparticle surface will give rise to electrosteric stabilization and will decrease attachment to the surface soil grains. Water saturated sand-packed columns were used in this study to investigate the transport of iron nanoparticle suspensions, bare or modified with the green polymer guar gum. The suspensions were prepared at 154 mg/L particle concentration and 0.5 g/L polymer concentration. Transport experiments were conducted by varying the ionic strength, ionic composition, and approach velocity of the fluid. Nanoparticle deposition rates, attachment efficiencies, and travel distances were subsequently calculated based on the classical particle filtration theory. It was found that bare iron nanoparticles are basically immobile in sandy porous media. In contrast, guar gum is able to ensure significant nanoparticle transport at the tested conditions, regardless of the chemistry of the solution. Attachment efficiency values for guar gum-coated nanoparticles under the various conditions tested were smaller than 0.066. Although the calculated travel distances may not prove satisfactory for field application, the investigation attested the promising role of guar gum to ensure mobility of iron nanoparticles in the subsurface environment.

  20. Plants as a Source of Green Corrosion Inhibitors: The Case of Gum ...

    African Journals Online (AJOL)

    The inhibitive performance of gum exudates from Acacia drepanolobium and Acacia senegal from Tanzania, towards the corrosion of mild steel in fresh water has been investigated. The experimental methods include potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) studies. The results ...

  1. The Effects of Chewing Cinnamon Flavored Gum on Mood, Feeling and Spelling Acquisition

    Science.gov (United States)

    Wilson, Andrew; Kim, Wonsun; Raudenbush, Bryan

    2016-01-01

    The purpose of the study is to investigate if the effects of chewing cinnamon flavored gum can increase mood, feeling and spelling acquisition. 5th grade students (n = 22) at Ilshin elementary school in South Korea served as participants. The same students were required to take 4 spelling tests with 1 given every day over the course of 4 days. For…

  2. Effect of partially hydrolyzed guar gum (PHGG) on the bioaccessibility of fat and cholesterol

    NARCIS (Netherlands)

    Minekus, M.; Jelier, M.; Xiao, J.-Z.; Kondo, S.; Iwatsuki, K.; Kokubo, S.; Bos, M.; Dunnewind, B.; Havenaar, R.

    2005-01-01

    The Addition of a compound that lowers the intestinal uptake of fat and cholesterol might be an interesting strategy to reduce the risk of vascular disease. Partially hydrolyzed guar gum (PHGG) has been shown to have this effect in healthy volunteers after intake of a yogurt drink with 3 to 6% PHGG.

  3. The Impact of Maltitol-Sweetened hewing Gum on the Dental Plaque Biofilm Microbiota Composition

    NARCIS (Netherlands)

    Keijser, B.J.F.; Broek1, T.J. van den; Slot, D.E.; Twillert, L. van; Kool, J.; Thabuis, C.; Ossendrijver, M.; Weijden, F.A. van der; Montijn, R.C.

    2018-01-01

    Background: The oral cavity harbors a complex microbial ecosystem, intimately related to oral health and disease. The use of polyol-sweetened gum is believed to benefit oral health through stimulation of salivary flow and impacting oral pathogenic bacteria. Maltitol is often used as sweetener in

  4. Effect of guar gum conjugation on functional, antioxidant and antimicrobial activity of egg white lysozyme.

    Science.gov (United States)

    Hamdani, Afshan Mumtaz; Wani, Idrees Ahmed; Bhat, Naseer Ahmad; Siddiqi, Raushid Ahmad

    2018-02-01

    This study was undertaken to analyze the effect of conjugation of egg-white lysozyme with guar gum. Lysozyme is an antimicrobial polypeptide that can be used for food preservation. Its antibacterial activity is limited to gram positive bacteria. Conjugation with polysaccharides like guar gum may broaden its activity against gram negatives. Conjugate was developed through Maillard reaction. Assays carried out included sugar estimation, SDS-PAGE, GPC, color, FT-IR, DSC, thermal stability, solubility, emulsifying, foaming and antioxidant activity. In addition, antimicrobial activity of the conjugate was determined against two gram positive (Staphyllococcus aureus and Enterococcus) and two gram negative pathogens (E. coli and Salmonella). Results showed higher functional properties of lysozyme-guar gum conjugate. The antioxidant properties increased from 2.02-35.80% (Inhibition of DPPH) and 1.65-4.93AAE/g (reducing power) upon guar gum conjugation. Conjugate significantly inhibited gram negative bacteria and the antibacterial activity also increased significantly against gram positive pathogens. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Highly Concentrated Alginate-Gellan Gum Composites for 3D Plotting of Complex Tissue Engineering Scaffolds

    Directory of Open Access Journals (Sweden)

    Ashwini Rahul Akkineni

    2016-04-01

    Full Text Available In tissue engineering, additive manufacturing (AM technologies have brought considerable progress as they allow the fabrication of three-dimensional (3D structures with defined architecture. 3D plotting is a versatile, extrusion-based AM technology suitable for processing a wide range of biomaterials including hydrogels. In this study, composites of highly concentrated alginate and gellan gum were prepared in order to combine the excellent printing properties of alginate with the favorable gelling characteristics of gellan gum. Mixtures of 16.7 wt % alginate and 2 or 3 wt % gellan gum were found applicable for 3D plotting. Characterization of the resulting composite scaffolds revealed an increased stiffness in the wet state (15%–20% higher Young’s modulus and significantly lower volume swelling in cell culture medium compared to pure alginate scaffolds (~10% vs. ~23%. Cytocompatibility experiments with human mesenchymal stem cells (hMSC revealed that cell attachment was improved—the seeding efficiency was ~2.5–3.5 times higher on the composites than on pure alginate. Additionally, the composites were shown to support hMSC proliferation and early osteogenic differentiation. In conclusion, print fidelity of highly concentrated alginate-gellan gum composites was comparable to those of pure alginate; after plotting and crosslinking, the scaffolds possessed improved qualities regarding shape fidelity, mechanical strength, and initial cell attachment making them attractive for tissue engineering applications.

  6. Two-colour chewing gum mixing ability: digitalisation and spatial heterogeneity analysis.

    Science.gov (United States)

    Weijenberg, R A F; Scherder, E J A; Visscher, C M; Gorissen, T; Yoshida, E; Lobbezoo, F

    2013-10-01

    Many techniques are available to assess masticatory performance, but not all are appropriate for every population. A proxy suitable for elderly persons suffering from dementia was lacking, and a two-colour chewing gum mixing ability test was investigated for this purpose. A fully automated digital analysis algorithm was applied to a mixing ability test using two-coloured gum samples in a stepwise increased number of chewing cycles protocol (Experiment 1: n = 14; seven men, 19-63 years), a test-retest assessment (Experiment 2: n = 10; four men, 20-49 years) and compared to an established wax cubes mixing ability test (Experiment 3: n = 13; 0 men, 21-31 years). Data were analysed with repeated measures anova (Experiment 1), the calculation of the intraclass correlation coefficient (ICC; Experiment 2) and Spearman's rho correlation coefficient (Experiment 3). The method was sensitive to increasing numbers of chewing cycles (F5,65 = 57·270, P = 0·000) and reliable in the test-retest (ICC value of 0·714, P = 0·004). There was no significant correlation between the two-coloured gum test and the wax cubes test. The two-coloured gum mixing ability test was able to adequately assess masticatory function and is recommended for use in a population of elderly persons with dementia. © 2013 John Wiley & Sons Ltd.

  7. The management of xerostomia in patients on haemodialysis : Comparison of artificial saliva and chewing gum

    NARCIS (Netherlands)

    Bots, CP; Brand, HS; Veerman, ECI; Valentijn-Benz, M; Van Amerongen, BM; Amerongen, AVN; Valentijn, RM; Vos, PI; Bijlsma, JA; ter Wee, PM

    2005-01-01

    Many patients on haemodialysis (HD) therapy suffer from a dry mouth and xerostomia. This can be relieved by mechanical and gustatory stimulation or palliative care. The aim of this crossover study was to investigate the effect and preferences of a sugar-free chewing gum (Freedent White(TM)) and a

  8. The management of xerostomia in patients on haemodialysis: comparison of artificial saliva and chewing gum

    NARCIS (Netherlands)

    Bots, Casper P.; Brand, Henk S.; Veerman, Enno C. I.; Valentijn-Benz, Marianne; van Amerongen, Barbara M.; Nieuw Amerongen, Arie V.; Valentijn, Robert M.; Vos, Pieter F.; Bijlsma, Joost A.; Bezemer, Pieter D.; ter Wee, Piet M.

    2005-01-01

    Many patients on haemodialysis (HD) therapy suffer from a dry mouth and xerostomia. This can be relieved by mechanical and gustatory stimulation or palliative care. The aim of this crossover study was to investigate the effect and preferences of a sugar-free chewing gum (Freedent White) and a

  9. Evaluation Of Snail Mucin Dispersed In Brachystegia Gum Gel As A ...

    African Journals Online (AJOL)

    Snail mucin was obtained from the mucilage of Archachatina marginata (Family Arionidae). The wound healing effect of the snail mucin was evaluated wth special attention to the effect when combined with honey in Brachystegia eurychoma gel preparation. Brachystegia eurycoma gum, snail mucin and honey were ...

  10. [Sugar-free, tooth-protecting chewing gum and candy. Results of a 7-year study].

    Science.gov (United States)

    Schneider, P; Mühlemann, H R

    1976-02-01

    Experiences of 7 years with sugarless chewing gums and lozenges (tab. I and II) regarding their tooth protective properties are reported. Telemetry of interproximal plaque pH allows to assess acid formation from carbohydrates by plaque bacteria under almost natural conditions. Altogether, 5 chewing gums and 8 lozenges containing sorbitol or mixtures of sorbitol and hydrogenated oligosaccharides were investigated. Lowest pH values during and after chewing sugarless gums varied between pH 6.0 and 7.3. When sucking sugarless lozenges the recorded pH values were between 5.8 and 7.0. In contrast to lozenges, the consumption of sugarless chewing gums becomes particularly important due to their greater stimulation of saliva and buffering capacity of oral fluid. All products tested did not acidify interproximal plaque below the critical pH and therefore comply with the regulations of the Swiss Federal Health Authorities with respect to the labeling or marketed sweets with "safe for teeth". New non-fermentable sugar-replacing substrates are being developed. Their utilization in foodstuffs and sweets is being discussed.

  11. Effect of Probiotic Yogurt and Xylitol-Containing Chewing Gums on Salivary S Mutans Count.

    Science.gov (United States)

    Ghasemi, Elnaz; Mazaheri, Romina; Tahmourespour, Arezoo

    In addition to improving gastrointestinal health and intestinal microflora, probiotic bacteria have been recently suggested to decrease cariogenic agents in the oral cavity. The aim of this study was to investigate the effects of probiotic yogurt and xylitol-containing chewing gums on reducing salivary Streptococcus mutans levels. This randomized clinical trial recruited 50 female students with over 10 5 colony forming units S. mutans per milliliter of their saliva. The participants were randomly allocated to two equal groups to receive either probiotic yogurt containing Lactobacillus acidophilus ATCC 4356 andBifidobacteriumbifidum ATCC 29521 (200 g daily) or xylitol-containing chewing gums (two gums three times daily after each meal; total xylitol content: 5.58 g daily) for three weeks. At baseline and one day, two weeks, and four weeks after the interventions, saliva samples were cultured on mitis-salivarius-bacitracin agar and salivary S. mutans counts were determined. Data were analyzed with independent t-tests, analysis of variance, and Fisher's least significant difference test. In both groups, S. mutans counts on the first day, second week, and fourth weeks after the intervention were significantly lower than baseline values (P yogurt consumers, the difference between the two groups was not statistically significant. Probiotic yogurt and xylitol-containing chewing gums seem to be as effective in reduction of salivary S. mutans levels. Their constant long-term consumption is thus recommended to prevent caries.

  12. Helicobacter pylori in ice cream and its control using mastic gum essential oil

    Directory of Open Access Journals (Sweden)

    Nagah Mohamed Saad

    2017-06-01

    Conclusion: All isolates recovered from small scale ice cream samples reflexing the hygienic conditions under which samples were produced. Mastic gum essential oil exhibited a powerful anti-H. pylori effect recommending its addition to food matrix for therapeutic purposes or as a functional food. [J Adv Vet Anim Res 2017; 4(2.000: 132-139

  13. Rheological Characterization of Isabgol Husk, Gum Katira Hydrocolloids, and Their Blends

    Directory of Open Access Journals (Sweden)

    Vipin Kumar Sharma

    2014-01-01

    Full Text Available The rheological parameters of Isabgol husk, gum katira, and their blends were determined in different media such as distilled water, 0.1 N HCl, and phosphate buffer (pH 7.4. The blend properties of Isabgol husk and gum katira were measured for four different percentage compositions in order to understand their compatibility in dispersion form such as 00 : 100, 25 : 50, 50 : 50, 75 : 25, and 100 : 00 in the gel strength of 1 mass%. The miscibility of blends was determined by calculating Isabgol husk-gum katira interaction parameters by Krigbaum and Wall equation. Other rheological properties were analyzed by Bingham, Power, Casson, Casson chocolate, and IPC paste analysis. The study revealed that the power flow index “p” was less than “1” in all concentrations of Isabgol husk, gum katira, and their blends dispersions indicating the shear-thinning (pseudoplastic behavior. All blends followed pseudoplastic behavior at thermal conditions as 298.15, 313.15, and 333.15°K and in dispersion media such as distilled water, 0.1 N HCl, and phosphate buffer (pH 7.4. Moreover, the study indicated the applicability of these blends in the development of drug delivery systems and in industries, for example, ice-cream, paste, nutraceutical, and so forth.

  14. Characterization of gums from local acacia species for the food and ...

    African Journals Online (AJOL)

    It was confirmed from the sugar reactions that their sugar composition were Rhamnose, Arabinose, Galactose, and Glucuronic acid. The viscosities increased with concentration and decreased with time, rose with pH till a pH of about 5 and then fell as the pH increased from 6 to 14. The local gums can be used as suitable ...

  15. Rheological Characterization of Isabgol Husk, Gum Katira Hydrocolloids, and Their Blends.

    Science.gov (United States)

    Sharma, Vipin Kumar; Mazumder, Bhaskar; Nautiyal, Vinod

    2014-01-01

    The rheological parameters of Isabgol husk, gum katira, and their blends were determined in different media such as distilled water, 0.1 N HCl, and phosphate buffer (pH 7.4). The blend properties of Isabgol husk and gum katira were measured for four different percentage compositions in order to understand their compatibility in dispersion form such as 00 : 100, 25 : 50, 50 : 50, 75 : 25, and 100 : 00 in the gel strength of 1 mass%. The miscibility of blends was determined by calculating Isabgol husk-gum katira interaction parameters by Krigbaum and Wall equation. Other rheological properties were analyzed by Bingham, Power, Casson, Casson chocolate, and IPC paste analysis. The study revealed that the power flow index "p" was less than "1" in all concentrations of Isabgol husk, gum katira, and their blends dispersions indicating the shear-thinning (pseudoplastic) behavior. All blends followed pseudoplastic behavior at thermal conditions as 298.15, 313.15, and 333.15°K and in dispersion media such as distilled water, 0.1 N HCl, and phosphate buffer (pH 7.4). Moreover, the study indicated the applicability of these blends in the development of drug delivery systems and in industries, for example, ice-cream, paste, nutraceutical, and so forth.

  16. Stepwise extraction of Lepidium sativum seed gum: Physicochemical characterization and functional properties

    DEFF Research Database (Denmark)

    Razmkhah, Somayeh; Razavi, Seyed Mohammad Ali; Mohammadifar, Mohammad Amin

    2016-01-01

    Cress seed gum (CSG) was fractionated using stepwise extraction with water, yielding three fractions (F1, F2, F3) whose average molecular weights ranged from 863 to 1080 kDa. The chemical composition (monosaccharide, ash, moisture, CHN and uronic acid contents) and molecular weight of the fractio...

  17. intra-species variation of the properties of gum exudates from acacia ...

    African Journals Online (AJOL)

    a

    . 1997, 11, 493. 22. Food Chemicals Codex III. Acacia (Gum arabic), National Academy of Sciences,. Washington D.C.; 1981, p 7. 23. Mhinzi, G.S.; Mosha, D.M.S. J. Chem. Soc. Pak. 1993, 15, 269. 24. Mhinzi, G.S.; Mosha, D.M.S. J.Food Sci.

  18. Synthesis and flocculation properties of gum ghatti andpoly(acrylamide-co-acrylonitrile) based biodegradable hydrogels

    CSIR Research Space (South Africa)

    Mittal, H

    2014-12-01

    Full Text Available This article reports the development of biodegradable flocculants based on graft co-polymers of gum ghatti (Gg) and a mixture of acrylamide and acrylonitrile co-monomers (AAm-co-AN). The hydrogel polymer exhibited an excellent swelling capacity...

  19. Preparation, characterization and electrical study of gum arabic/ZnO ...

    Indian Academy of Sciences (India)

    #Present address: Instituto de Ciencias Físicas, Universidad Nacional Autónoma de México, Cuernavaca 62210, Mexico. MS received 24 February 2015; accepted 8 June 2015. Abstract. Gum arabic (GA)-mediated chemical synthesis was carried out for obtaining ZnO nanoparticles (ZnO-. NPs) (particle size of ZnO ≈ 40 ...

  20. Two-colour chewing gum mixing ability: digitalisation and spatial heterogeneity analysis

    NARCIS (Netherlands)

    Weijenberg, R.A.F.; Scherder, E.J.A.; Visscher, C.M.; Gorissen, T.; Yoshida, E.; Lobbezoo, F.

    2013-01-01

    Many techniques are available to assess masticatory performance, but not all are appropriate for every population. A proxy suitable for elderly persons suffering from dementia was lacking, and a two-colour chewing gum mixing ability test was investigated for this purpose. A fully automated digital

  1. 76 FR 44811 - Carboxymethyl Guar Gum Sodium Salt and Carboxymethyl-Hydroxypropyl Guar; Exemption From the...

    Science.gov (United States)

    2011-07-27

    ... salt and carboxymethyl-hydroxypropyl guar residues to pose no appreciable risk to human health given... Guar Gum Sodium Salt and Carboxymethyl- Hydroxypropyl Guar; Exemption From the Requirement of a... salt (CAS Reg. No. 39346-76-4) and carboxymethyl-hydroxypropyl guar (CAS Reg. No. 68130-15-4); when...

  2. Exopolysaccharide Gellan Gum and Derived Oligo-Gellan Enhance Growth and Antimicrobial Activity in Eucomis Plants

    Directory of Open Access Journals (Sweden)

    Piotr Salachna

    2018-02-01

    Full Text Available One of the visible trends in the cultivation of plants, particularly of medicinal ones, is the increasing interest of researchers in polysaccharides and their derivatives that show biostimulatory properties and are also safe to use. In the current study, we evaluated the effects of gellan gum and its depolymerized form oligo-gellan, on growth and antimicrobial activity of two ornamental species Eucomis bicolor and Eucomis comosa used in natural medicine. The biopolymers were applied in the form of bulb coating prepared by using polyelectrolyte complexes. In both species investigated, gellan gum and oligo-gellan enhanced the fresh weight of leaves and bulbs, the performance of the photosynthetic apparatus, and the leaf content of basic macronutrients. In comparison with the control, the plants treated with oligo-gellan accumulated more biomass, were first to flower, and had the highest leaf content of potassium. The extracts from the bulbs treated with gellan gum and oligo-gellan showed higher effectiveness in reducing the count of Bacillus atrophaeus, Escherichia coli, and Staphylococcus aureus than those from the bulbs not treated with the polysaccharides. The research described here largely expands our current knowledge on the effects of gellan gum derivatives and has a huge practical potential in agriculture production.

  3. Deformation response of gellan gum based bone scaffold subjected to uniaxial quasi-static loading

    Czech Academy of Sciences Publication Activity Database

    Kytýř, Daniel; Krčmářová, Nela; Šleichrt, Jan; Fíla, Tomáš; Koudelka_ml., Petr; Gantar, A.; Novak, S.

    2017-01-01

    Roč. 57, č. 1 (2017), s. 14-21 ISSN 1210-2709 EU Projects: European Commission(XE) ATCZ38 Institutional support: RVO:68378297 Keywords : gellan gum scaffold * reinforcement * uni-axial loading Subject RIV: JJ - Other Materials OBOR OECD: Materials engineering https://ojs.cvut.cz/ojs/index.php/ap/article/view/3885

  4. Synthesis of acrylate guar-gum for delivery of bio-active molecules

    Indian Academy of Sciences (India)

    Acrylated guar-gum chain is synthesized and analysed using Fourier transform infrared, differential scanning calorimetry and X-ray diffraction techniques to gain an insight into the particle size and structural features. Chlorpyrifos is then entrapped into the polymer, and its release is studied under various conditions. Critical ...

  5. Boswellia gum resin/chitosan polymer composites: Controlled delivery vehicles for aceclofenac.

    Science.gov (United States)

    Jana, Sougata; Laha, Bibek; Maiti, Sabyasachi

    2015-01-01

    This study was undertaken to evaluate the effect of Boswellia gum resin on the properties of glutaraldehyde (GA) crosslinked chitosan polymer composites and their potential as oral delivery vehicles for a non-steroidal anti-inflammatory drug, aceclofenac. The incorporation of resinous material caused a significant improvement in drug entrapment efficiency (∼40%) of the polymer composites. Fourier transform infrared (FTIR) spectroscopic analysis confirmed the formation of chitosan-gum resin composites and did not show any evidence of drug-polymer chemical interaction. Field emission scanning electron microscopy (FE-SEM) suggested the formation of particulate polymer composites up to chitosan:gum resin mass ratio of 1:3. Only 8-17% drug was released into HCl solution (pH 1.2) in 2h. The drug release rate of polymer composites was faster in phosphate buffer solution (pH 6.8). The composites released ∼60-68% drug load in 7h. In same duration, the drug release rate suddenly boosted up to 92% as the concentration of gum resin in the composites was raised to 80%. The drug release mechanism deviated from non-Fickian to case-II type with increasing resin concentration in the composites. Hence, GA-treated Boswellia resin-chitosan composites could be considered as alternative vehicles for oral delivery of aceclofenac. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. Structural characterization and thermal behavior of a gum extracted from Ferula assa foetida L.

    Science.gov (United States)

    Saeidy, Sima; Nasirpour, Ali; Keramat, Javad; Desbrières, Jacques; Cerf, Didier Le; Pierre, Guillaume; Delattre, Cedric; Laroche, Céline; Baynast, Hélène De; Ursu, Alina-Violeta; Marcati, Alain; Djelveh, Gholamreza; Michaud, Philippe

    2018-02-01

    The gum asafoetida, an oleo-gum-resin from root of Ferula assa foetida, was extracted through alcoholic procedure followed by water extraction and then biochemically characterized using colorimetric assays, Fourier infrared spectroscopy, gas chromatography coupled to mass spectrometry, and 1D and 2D nuclear magnetic resonance. The gum was mainly composed of carbohydrates (67.39% w/w) with a monosaccharide distribution of 11.5: 5.9: 2.3: 1 between Gal, Ara, Rha and GlcA (molar ratio) and proteins (arabinogalactan protein). The polysaccharide consisted of a (1→3)-β-d-galactan backbone ramified predominantly from O-6 but also from O-4 and O-4,6. Side chains included terminal-α-l-Araf, terminal-α-l-Rhap, (1→3)-α-l-Araf, (1→5)-α-l-Araf, terminal-β-d-Galp, β-d-GlcA and traces of (1→4)-β-d-GlcA. X-ray diffraction pattern showed a semi crystalline microstructure. Thermal behavior of the gum was evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) revealed temperatures below and upper 200°C as dominant regions of weight loss. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Preparation, characterization and electrical study of gum arabic/ZnO ...

    Indian Academy of Sciences (India)

    Gum arabic (GA)-mediated chemical synthesis was carried out for obtaining ZnO nanoparticles (ZnO-NPs) (particle size of ZnO ≈ 40 nm) which, in turn, was used for preparing ZnO–biopolymer nanocomposites. The dielectric study of this synthesized products is reported in this paper. The synthesized products were ...

  8. Analysis of the socio-economic factors associated with gum Arabic ...

    African Journals Online (AJOL)

    The study is an analysis of the socio-economic factors associated with gum arabic collectors in Northern Guinea Savanna Zone of Adamawa State, Nigeria through a questionnaire survey on a sample of 100 respondents obtained through a multi stage sampling technique. Data collected were analyzed using descriptive ...

  9. "JCE" Classroom Activity #105. A Sticky Situation: Chewing Gum and Solubility

    Science.gov (United States)

    Montes-Gonzalez, Ingrid; Cintron-Maldonado, Jose A.; Perez-Medina, Ilia E.; Montes-Berrios, Veronica; Roman-Lopez, Saurie N.

    2010-01-01

    In this Activity, students perform several solubility tests using common food items such as chocolate, chewing gum, water, sugar, and oil. From their observations during the Activity, students will initially classify the substances tested as soluble or insoluble. They will then use their understanding of the chemistry of solubility to classify the…

  10. Effects of caffeine chewing gum on race performance and physiology in male and female cyclists.

    Science.gov (United States)

    Paton, Carl; Costa, Vitor; Guglielmo, Luiz

    2015-01-01

    This investigation reports the effects of chewing caffeinated gum on race performance with trained cyclists. Twenty competitive cyclists completed two 30-km time trials that included a maximal effort 0.2-km sprint each 10-km. Caffeine (~3-4 mg · kg(-1)) or placebo was administered double-blind via chewing gum at the 10-km point following completion of the first sprint. Measures of power output, oxygen uptake, heart rate, lactate and perceived exertion were taken at set intervals during the time trial. Results indicated no substantial differences in any measured variables between caffeine and placebo conditions during the first 20-km of the time trial. Caffeine gum did however lead to substantial enhancements (mean ± 90% confidence limits (CLs)) in mean power during the final 10-km (3.8% ± 2.3%), and sprint power at 30-km (4.0% ± 3.6%). The increases in performance over the final 10-km were associated with small increases in heart rate and blood lactate (effect size of 0.24 and 0.28, respectively). There were large inter-individual variations in the response to caffeine, and apparent gender related differences in sprint performance. Chewing caffeine gum improves mean and sprint performance power in the final 10-km of a 30-km time trial in male and female cyclists most likely through an increase in nervous system activation.

  11. Neuropharmacological screening of essential oil from oleo gum resin of Gardenia lucida Roxb.

    Science.gov (United States)

    Shareef, Mohammad Zubair; Yellu, Narsimha Reddy; Achanta, Venkata Narsimha Appa Rao

    2013-10-07

    The oleo gum resin of Gardenia lucida is commonly employed in traditional medicine to treat multiple ailments, including epilepsy and mania. The essential oil isolated from it was screened for CNS activities to check if it is responsible for the claims made regarding the traditional use of the oleo gum resin. The hypnotic and anticonvulsant activity was assessed by pentobarbitone induced hypnosis and convulsant models-Maximum electroshock (MES) and Pentylene tetrazole (PTZ) respectively. Effect on motor activity was evaluated using an actophotometer, rotarod and grip strength methods. The oil significantly potentiated the barbitone induced hypnosis and offered significant protection against the intensity and frequency of convulsions and mortality rate in both the convulsant models. A significant decrease in locomotion, motor impairment and loss of gripping reflex was also observed. The essential oil of the oleo gum resin of Gardenia lucida is a CNS depressant and anticonvulsant with central muscle relaxant properties. This justifies the claims made regarding the use of the oleo gum resin of Gardenia lucida in CNS disorders. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  12. Irritant potential of some constituents from oleo-gum-resin of Commiphora myrrha.

    Science.gov (United States)

    Saeed, M Asif; Sabir, A W

    2004-01-01

    The irritant potentials of essential oil and seven sesquiterpenoids compounds newly isolated from the oleo-gum-resin of Commiphora myrrha were investigated by open mouse ear assay. The essential oil, curzerenone, furanodiene-6-one and furanoeudesma-1,3-diene showed potent and persistent irritant effects while others possess least irritant potentials.

  13. Synthesis of acrylate guar-gum for delivery of bio-active molecules

    Indian Academy of Sciences (India)

    the mentioned food applications, unmodified guar-gums are used in a number of industries (pharmaceutics, personal care, enhanced oil recovery) in which their high content of insol- uble residues, weak and unstable solution transparency and. ∗. Author for correspondence (subhoscom@yahoo.co.in) slow dissolution ...

  14. 78 FR 33354 - Xanthan Gum From Austria: Final Determination of Sales at Less Than Fair Value

    Science.gov (United States)

    2013-06-04

    ...: Final Determination of Sales at Less Than Fair Value AGENCY: Import Administration, International Trade... Xanthan Gum from Austria: Preliminary Determination of Sales at Less Than Fair Value and Postponement of... Paul Piquado, Assistant Secretary for Import Administration, concerning, Less Than Fair Value...

  15. Rifabutin-loaded Floating Gellan Gum Beads: Effect of Calcium and ...

    African Journals Online (AJOL)

    Erah

    gellan gum: native or natural form, which has high acyl contents, and low or deacetylated form [1]. In the presence of counterions, this polymer is capable of forming gels that are particularly strong when formed with divalent ions. The degree of acylation also influences the strength of the resulting network. Indeed, in its native ...

  16. 77 FR 65361 - Xanthan Gum From Austria and the People's Republic of China: Postponement of Preliminary...

    Science.gov (United States)

    2012-10-26

    ... Austria and the People's Republic of China: Postponement of Preliminary Determinations of Antidumping Duty...: October 26, 2012. FOR FURTHER INFORMATION CONTACT: Karine Gziryan (Austria) or Brandon Farlander (People's... of initiation of antidumping duty investigations of xanthan gum from Austria and the People's...

  17. Optimizing the production of welan gum by Alcaligenes facalis NX-3 ...

    African Journals Online (AJOL)

    Burman design was applied to elucidate the key ingredients in the media and the results indicated that the corn starch, cottonseed cake flour have significant effects on welan gum production. Central composite design was employed to search for the ...

  18. Preparation and characterization of gum karaya hydrogel nanocomposite flocculant for metal ions removal from mine effluents

    CSIR Research Space (South Africa)

    Fosso-Kankeu, E

    2016-02-01

    Full Text Available This research paper reports the removal of heavy metal ions from mine effluents using the gum karaya (GK)-grafted poly(acrylamide-co-acrylic acid) incorporated iron oxide magnetic nanoparticles (Fe3O4 MNPs) hydrogel nanocomposite [i.e., GK...

  19. The efficacy of two prototype chewing gums for the removal of extrinsic tooth stain

    NARCIS (Netherlands)

    Ozcan, M; Kulak, Y; Kazazoglu, E

    Aim: To compare the potential efficacy of two prototype chewing gums in extrinsic stain removal on natural teeth. Setting: Dental school clinics. Design: Double-blind, two groups, parallel design. Participants: 76 adult volunteers (32m, 44f, mean age: 20.6 years old). Methods: Oral hard and soft

  20. KINEMATICS OF THE IONIZED-GAS IN PUPPIS-VELA INCLUDING THE GUM NEBULA

    NARCIS (Netherlands)

    SAHU, MS; SAHU, KC

    1993-01-01

    We present a high resolution spectroscopic study of the ionised gas in Puppis-Vela, which includes the Gum Nebula and the IRAS Vela Shell, in the emission lines of Halpha lambda6563 angstrom, [NII] lambdalambda6548, 6584 angstrom and the [OIII] lambda5007 angstrom. Line profiles were obtained at 18

  1. Release of peppermint flavour compounds from chewing gum: effect of oral functions

    DEFF Research Database (Denmark)

    Haahr, Anne-Mette; Bardow, A.; Thomsen, C.E.

    2004-01-01

    During chewing, the oral cavity functions like a bellow, forcing volatile flavour compounds into the exhaling air to the nasal compartment. Accordingly, we hypothesised that flavour release from chewing gum is predominantly governed by chewing frequency (CF), although other oral functions, like...

  2. Synthesis of acrylate guar-gum for delivery of bio-active molecules

    Indian Academy of Sciences (India)

    Modification of natural polymers by graft copolymerization is a promising technique as it functionalizes these biopolymer to their potential, imparting desirable properties onto them. Grafting with vinyl monomers is the route for modifying the properties of the naturally occurring guar-gum for their better industrial exploitation ...

  3. The effect of gum Arabic oral treatment on the iron and protein status ...

    African Journals Online (AJOL)

    Hemoglobin (Hb), hematocrit, total protein, albumin, globulin and 24-hour urine volume as well as serum iron, total iron-binding capacity (TIBC),transferrin saturation, packed cell volume (PCV) and, mean corpuscular hemoglobin concentration (MCHC) were determined. Results: Following administration of gum arabic oral ...

  4. Effect of chewing gums containing the probiotic bacterium Lactobacillus reuteri on oral malodour

    DEFF Research Database (Denmark)

    Keller, Mette K; Bardow, Allan; Jensdottir, Thorbjörg

    2012-01-01

    this randomized double-blind placebo-controlled cross-over trial. The design included run-in and wash-out periods interspersed by two intervention periods of 14 days each. The subjects were instructed to chew one gum in the morning and one in the evening containing either two strains of probiotic lactobacilli (L...

  5. Characterization of some psorosis and concave gum isolates from northwestern Argentina Caracterización de aislamientos de psorosis y concave gum del noroeste argentino

    Directory of Open Access Journals (Sweden)

    Julia Figueroa

    Full Text Available The Citrus Sanitation Center of the Estación Experimental Agroindustrial Obispo Colombres in Tucumán, Argentina, has developed a virus bank of various graft-transmissible citrus pathogens found in northwestern Argentina. In this bank, several psorosis and concave gum isolates are maintained in Pineapple sweet orange seedlings. In order to characterize these pathogens, 11 isolates were indexed to seedlings of Pineapple sweet orange, Dweet tangor, Eureka lemon plus Etrog citron budded on rough lemon seedlings. Cross protection was applied for identifying psorosis-A. Symptoms obtained were variable and ranged from mild to very severe. A clear effect of temperature on symptom expression, and distinct differences in the reactions between psorosis-A and concave gum viruses were detected.El Centro de Saneamiento de Citrus de la Estación Experimental Agroindustrial Obispo Colombres, de Tucumán, Argentina, ha constituido un banco de virus de cítricos con material recolectado en la región noroeste del país. El mismo cuenta con varios aislamientos de psorosis y concave gum que se mantienen en plantas de naranjo dulce Pineapple. Con el objetivo de caracterizar biológicamente 11 de estos aislamientos, se inocularon plantines de naranjo dulce Pineapple, Dweet tangor, limonero Eureka y plantas injertadas de cidro Etrog en limoneros rugoso. Las pruebas con Pineapple se realizaron por duplicado bajo dos condiciones de temperatura: frías y calientes. La confirmación de psorosis A se realizó mediante prueba de protección cruzada con un aislamiento de psorosis B. Los resultados obtenidos muestran una amplia diversidad biológica entre los aislamientos, con expresión de síntomas que variaron desde suaves a muy severos. Se confirmó la presencia de psorosis A y se encontró que los aislamientos de "concave gum" del banco de virus no estaban en mezcla con psorosis. El efecto de la temperatura en la manifestación de los síntomas fue significativo y se

  6. Evaluation of the content of TiO2nanoparticles in the coatings of chewing gums.

    Science.gov (United States)

    Dudefoi, William; Terrisse, Hélène; Popa, Aurelian Florin; Gautron, Eric; Humbert, Bernard; Ropers, Marie-Hélène

    2018-02-01

    Titanium dioxide is a metal oxide used as a white pigment in many food categories, including confectionery. Due to differences in the mass fraction of nanoparticles contained in TiO 2 , the estimated intakes of TiO 2 nanoparticles differ by a factor of 10 in the literature. To resolve this problem, a better estimation of the mass of nanoparticles present in food products is needed. In this study, we focused our efforts on chewing gum, which is one of the food products contributing most to the intake of TiO 2 . The coatings of four kinds of chewing gum, where the presence of TiO 2 was confirmed by Raman spectroscopy, were extracted in aqueous phases. The extracts were analysed by transmission electron microscopy (TEM), X-ray diffraction, Fourier Transform Raman spectroscopy, and inductively coupled plasma atomic emission spectroscopy (ICP-AES) to establish their chemical composition, crystallinity and size distribution. The coatings of the four chewing gums differ chemically from each other, and more specifically the amount of TiO 2 varies from one coating to another. TiO 2 particles constitute the entire coating of some chewing gums, whereas for others, TiO 2 particles are embedded in an organic matrix and/or mixed with minerals like calcium carbonate, talc, or magnesium silicate. We found 1.1 ± 0.3 to 17.3 ± 0.9 mg TiO 2 particles per piece of chewing gum, with a mean diameter of 135 ± 42 nm. TiO 2 nanoparticles account for 19 ± 4% of all particles, which represents a mass fraction of 4.2 ± 0.1% on average. The intake of nanoparticles is thus highly dependent on the kind of chewing gum, with an estimated range extending from 0.04 ± 0.01 to 0.81 ± 0.04 mg of nano-TiO 2 per piece of chewing gum. These data should serve to refine the exposure scenario.

  7. Development of Oral Dissolvable Films of Diclofenac Sodium for Osteoarthritis Using Albizia and Khaya Gums as Hydrophilic Film Formers

    Directory of Open Access Journals (Sweden)

    Martina Aduenimaa Bonsu

    2016-01-01

    Full Text Available Oral dissolvable films (ODFs of diclofenac sodium intended for osteoarthritis were prepared using Albizia and Khaya gums as hydrophilic film formers. The physicochemical properties of the gums were characterized and the gums were used to prepare diclofenac sodium ODFs (~50 mg/4 cm2 film by solvent casting. The two gums showed satisfactory film forming properties. The physicomechanical properties, drug-excipient compatibility, and in vitro drug release of the films in phosphate buffer pH 6.8 were studied. Khaya gum had higher extraction yield, moisture content, insoluble matter and true density while Albizia gum showed greater swelling capacity, solubility, and minerals content. The ODFs were thin, soft, and flexible with smooth glossy surfaces and possessed satisfactory physicomechanical properties. FTIR studies showed that no interaction occurred between the drug and the gums. The ODFs disintegrated in 75% drug release within 7 min with dissolution efficiencies of ~83–96%. Drug releases from F2, F3, F4, F5, and F6 were similar to F1 (p>0.05; f115 and f2<50. Drug release followed the Higuchi kinetic model which is indicative of Fickian drug diffusion.

  8. The Use of Hibiscus esculentus (Okra Gum in Sustaining the Release of Propranolol Hydrochloride in a Solid Oral Dosage Form

    Directory of Open Access Journals (Sweden)

    Nurul Dhania Zaharuddin

    2014-01-01

    Full Text Available The effectiveness of Okra gum in sustaining the release of propranolol hydrochloride in a tablet was studied. Okra gum was extracted from the pods of Hibiscus esculentus using acetone as a drying agent. Dried Okra gum was made into powder form and its physical and chemical characteristics such as solubility, pH, moisture content, viscosity, morphology study using SEM, infrared study using FTIR, crystallinity study using XRD, and thermal study using DSC and TGA were carried out. The powder was used in the preparation of tablet using granulation and compression methods. Propranolol hydrochloride was used as a model drug and the activity of Okra gum as a binder was compared by preparing tablets using a synthetic and a semisynthetic binder which are hydroxylmethylpropyl cellulose (HPMC and sodium alginate, respectively. Evaluation of drug release kinetics that was attained from dissolution studies showed that Okra gum retarded the release up to 24 hours and exhibited the longest release as compared to HPMC and sodium alginate. The tensile and crushing strength of tablets was also evaluated by conducting hardness and friability tests. Okra gum was observed to produce tablets with the highest hardness value and lowest friability. Hence, Okra gum was testified as an effective adjuvant to produce favourable sustained release tablets with strong tensile and crushing strength.

  9. The Effect of Persian Gums and Tragacanth on Texture and Sensory Characteristics of Non-Gluten ‎Cakes

    Directory of Open Access Journals (Sweden)

    Afrooz Ghasemi

    2017-08-01

    Methods: The effect of addition of Persian gums, Tragacanth, and a combination of both of these compounds at levels of 0.5, 1, and 1.5% on texture, color, and sensory characteristics of these cakes was evaluated in this study. Results: The results showed that solidity and viscosity factors were elevated by addition of gum to cake. Using of gums in cakes leads to moisture maintenance inside the cake texture and thus improves mastication property. Furthermore, the results of porosity evaluation showed that addition of Persian gums and Tragacanth decreases the size and increases the number of gas cells inside the cake texture and improves porosity. The best porosity was related to the sample containing 1.5% Persian gum and Tragacanth. The treatment that contained 0.75% Persian gum and 0.75% Tragacanth had the highest acceptability among consumers. Conclusions: Results showed that Persian and Tragacanth gums, whether used independently or in combination, can improve the quality and organoleptic characteristics of gluten-free cakes.

  10. Kinetic study of the gum decomposition from brazilian gasoline; Estudo cinetico da decomposicao da goma oriunda de gasolina brasileira

    Energy Technology Data Exchange (ETDEWEB)

    Pivesso, Paulo Roberto; Galvao, Luzia Patricia Fernandes de Carvalho; Fernandes Junior, Valter Jose; Coutinho, Ana Carla S.L.S. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Souza, Antonio Gouveia de [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil)

    2004-07-01

    The modern gasoline contains in your composition insatured hydrocarbons that can be degraded by the action of the air, heat and substances presenting catalytic activity. The presence of air and heat promote oxidation reactions and polymerization, which promote the gum formation, that is a product with diverse characteristics. The petroleum and l the automobile industries have been investing in researches to lessen the gum undesirable effects. Nowadays, several products are added to the gasoline, for example, the surfactant additives, with the purpose to reduce the formation of deposits in the engine. This work evaluated the influence of a polyester amine addictive, used as the main active component in Brazilian gasoline. The gums were generated evaporating the gasolines according to the ASTM D 381 method. Two types of gum were obtained; the Common Washed Gum (White Sample) and the Additive based Washed Gum (Additive Sample). Both samples were characterized for thermal analysis and submitted for a kinetic study using the model-free method proposed by Vyazovkin. This approach was applied to the final stage of the gums decomposition, supplying the corresponding relative kinetic parameters, such as energy of activation and conversion (author)

  11. Asparagus Beetle and Spotted Asparagus Beetle

    OpenAIRE

    Hodgson, Erin W.; Drost, Dan

    2007-01-01

    Asparagus beetle, Crioceris asparagi, and spotted asparagus beetle, C. duodecimpunctata are leaf beetles in the family Chrysomelidae. These beetles feed exclusively on asparagus and are native to Europe. Asparagus beetle is the more economically injurious of the two species.

  12. Detecting Blind Spot By Using Ultrasonic Sensor

    Directory of Open Access Journals (Sweden)

    T. S. Ajay

    2015-08-01

    Full Text Available Safety remains a top concern for automobile industries and new-car shoppers. Detection of Blind Spots is a major concern for safety issues. So automobiles have been constantly updating their products with new technologies to detect blind spots so that they can add more safety to the vehicle and also reduce the road accidents. Almost 1.5 million people die in road accidents each year. Blind spot of an automobile is the region of the vehicle which cannot be observed properly while looking either through side or rear mirror view. To meet the above requirements this paper describes detecting blind spot by using ultrasonic sensor and controlling the direction of car by automatic steering. The technology embedded in the system is capable of automatically steer the vehicle away from an obstacle if the system determines that a collision is impending or if the vehicle is in the vicinity of our car.

  13. How Many Spots Does a Cheetah Have?

    Science.gov (United States)

    Reed, Kristine M.

    2000-01-01

    Describes first grade students' mathematical investigation of the number of spots on a cheetah. The exploration of counting and estimation strategies that grew from the investigation gives evidence that mathematicians come in all ages. (ASK)

  14. Plasma spot welding of ferritic stainless steels

    International Nuclear Information System (INIS)

    Lesnjak, A.; Tusek, J.

    2002-01-01

    Plasma spot wedding of ferritic stainless steels studied. The study was focused on welding parameters, plasma and shieldings and the optimum welding equipment. Plasma-spot welded overlap joints on a 0.8 mm thick ferritic stainless steel sheet were subjected to a visual examination and mechanical testing in terms of tension-shear strength. Several macro specimens were prepared Plasma spot welding is suitable to use the same gas as shielding gas and as plasma gas , i. e. a 98% Ar/2% H 2 gas mixture. Tension-shear strength of plasma-spot welded joint was compared to that of resistance sport welded joints. It was found that the resistance welded joints withstand a somewhat stronger load than the plasma welded joints due to a large weld sport diameter of the former. Strength of both types of welded joints is approximately the same. (Author) 32 refs

  15. A telemetry experiment on spotted grunter Pomadasys ...

    African Journals Online (AJOL)

    associated fish in South Africa was investigated by conducting a tracking experiment on spotted grunter Pomadasys commersonnii in the East Kleinemonde Estuary. The telemetry equipment comprised two VEMCO V8 transmitters and a ...

  16. Measuring microfocus focal spots using digital radiography

    Energy Technology Data Exchange (ETDEWEB)

    Fry, David A [Los Alamos National Laboratory

    2009-01-01

    Measurement of microfocus spot size can be important for several reasons: (1) Quality assurance during manufacture of microfocus tubes; (2) Tracking performance and stability of microfocus tubes; (3) Determining magnification (especially important for digital radiography where the native spatial resolution of the digital system is not adequate for the application); (4) Knowledge of unsharpness from the focal spot alone. The European Standard EN 12543-5 is based on a simple geometrical method of calculating focal spot size from unsharpness of high magnification film radiographs. When determining microfocus focal spot dimensions using unsharpness measurements both signal-to-noise (SNR) and magnification can be important. There is a maximum accuracy that is a function of SNR and therefore an optimal magnification. Greater than optimal magnification can be used but it will not increase accuracy.

  17. Short-term effects of chewing gum on satiety and afternoon snack intake in healthy weight and obese women.

    Science.gov (United States)

    Park, Eunyoung; Edirisinghe, Indika; Inui, Taichi; Kergoat, Sophie; Kelley, Michael; Burton-Freeman, Britt

    2016-05-15

    Afternoon snacking contributes significantly to total energy intake. Strategies to enhance the satiety value of lunch and reduce afternoon snacking are of interest for body weight management. To assess whether between-meal gum chewing would enhance the satiety response to a fixed lunch meal; and assess the role of cholecystokinin (CCK) as a potential mediator of the response in non-obese healthy weight and obese women. Fifty unrestrained obese (n=25) and non-obese healthy weight (n=25) women participated in a two-arm cross-over study assessing multiple (15min per hour×3h) gum chewing (GUM) occurrences or no gum (Control) on subjective ratings of satiety, subsequent sweet and salty snack intake, CCK and general metabolic responses. GUM compared to Control resulted in significant suppression of hunger, desire to eat and prospective consumption (psnack energy intake was reduced ~9.3% by GUM, but not significantly different from Control (p=0.08). However, overall carbohydrate intake was reduced by GUM (p=0.03). This was consistent with a reduction in snacks characterized as high carbohydrate, low fat (p=0.02). BMI specific effects indicated GUM reduced pretzel intake in obese women (p=0.05) and Oreo cookie intake in healthy weight women (p=0.03) 3h after lunch. Metabolic responses and CCK did not differ between experimental conditions. Chewing gum intermittently post-lunch enhances perceptions of satiety and may have important implications in reducing afternoon high carbohydrate-snack intake. Copyright © 2016. Published by Elsevier Inc.

  18. Structure and mechanism of GumK, a membrane-associated glucuronosyltransferase.

    Science.gov (United States)

    Barreras, Máximo; Salinas, Silvina R; Abdian, Patricia L; Kampel, Matías A; Ielpi, Luis

    2008-09-05

    Xanthomonas campestris GumK (beta-1,2-glucuronosyltransferase) is a 44-kDa membrane-associated protein that is involved in the biosynthesis of xanthan, an exopolysaccharide crucial for this bacterium's phytopathogenicity. Xanthan also has many important industrial applications. The GumK enzyme is the founding member of the glycosyltransferase family 70 of carbohydrate-active enzymes, which is composed of bacterial glycosyltransferases involved in exopolysaccharide synthesis. No x-ray structures have been reported for this family. To better understand the mechanism of action of the bacterial glycosyltransferases in this family, the x-ray crystal structure of apo-GumK was solved at 1.9 angstroms resolution. The enzyme has two well defined Rossmann domains with a catalytic cleft between them, which is a typical feature of the glycosyltransferase B superfamily. Additionally, the crystal structure of GumK complexed with UDP was solved at 2.28 angstroms resolution. We identified a number of catalytically important residues, including Asp157, which serves as the general base in the transfer reaction. Residues Met231, Met273, Glu272, Tyr292, Met306, Lys307, and Gln310 interact with UDP, and mutation of these residues affected protein activity both in vitro and in vivo. The biological and structural data reported here shed light on the molecular basis for donor and acceptor selectivity in this glycosyltransferase family. These results also provide a rationale to obtain new polysaccharides by varying residues in the conserved alpha/beta/alpha structural motif of GumK.

  19. Sugar-free chewing gum and dental caries: a systematic review

    Directory of Open Access Journals (Sweden)

    Steffen Mickenautsch

    2007-04-01

    Full Text Available OBJECTIVE: To appraise existing evidence for a therapeutic / anti-cariogenic effect of sugar-free chewing gum for patients. METHOD: 9 English and 2 Portuguese databases were searched using English and Portuguese keywords. Relevant articles in English, German, Portuguese and Spanish were included for review. Trials were excluded on lack of randomisation, control group, blinding and baseline data, drop out rate >33%, no statistical adjustment of baseline differences and no assessment of clinically important outcomes. Reviews were excluded on lack of information, article selection criteria, search strategy followed, search keywords, searched databases or lack of study-by-study critique tables. In cases of multiple reports from the same study, the report covering the longest period was included. Two reviewers independently reviewed and assessed the quality of accepted articles. RESULTS: Thirty-nine articles were included for review. Thirty were excluded and 9 accepted. Of the 9 accepted, 2 trials of reasonable and good evidence value did not demonstrate any anti-cariogenic effect of sugar-free chewing gum. However, 7 articles, with 1 of strong, and 6 of good evidence value, demonstrated anti-cariogenic effects of chewing Sorbitol, Xylitol or Sorbitol/Xylitol gum. This effect can be ascribed to saliva stimulation through the chewing process, particularly when gum is used immediately after meals; the lack of sucrose and the inability of bacteria to metabolize polyols into acids. Conclusion: The evidence suggests that sugar-free chewing gum has a caries-reducing effect. Further well-designed randomised trials are needed to confirm these findings.

  20. Comparison of soybean oils, gum, and defatted soy flour extract in stabilizing menhaden oil during heating.

    Science.gov (United States)

    Yue, X; Xu, Z; Prinyawiwatkul, W; Losso, J N; King, J M; Godber, J S

    2008-01-01

    Capabilities of crude soy oil, degummed oil, gum, and defatted soy flour extract in preventing the oxidation of menhaden oil and its omega-3 fatty acids, DHA (docosahexaenoic acid) and EPA (eicosapentaenoic acid), during heating were evaluated. The menhaden oil mixed with defatted soy flour extract demonstrated the greatest stability by producing the lowest TBA reactive oxidation products and retaining the highest concentrations of DHA and EPA after heating at 150 degrees C for 30 min. A range of 62.8% to 71.5% of DHA and 67.7% to 75.9% of EPA remained in the fish oil with defatted soy flour extract, while only 29.9% of DHA and 37.2% of EPA were retained in the fish oil with no addition. Stabilizing capability from highest to lowest was defatted flour extract > gum > degummed oil = crude oil. The defatted flour extract had the highest level of total phenolic content (11.3 microg catechin equivalent/g), while crude oil, degummed oil, and gum contained 7.1, 6.1, and 6.0 microg catechin equivalent/g, respectively. The level of isoflavones in the defatted soy flour extract was 55 mg/g, which was over 100 times higher than in the crude oil or gum. Although isoflavones were not detected in the degummed oil, it contained the highest level of tocopherols (414 mug/g), whereas the lowest level (215 microg/g) was found in the defatted flour extract. The order of free radical scavenging capability measured from high to low was the defatted soy flour extract, crude oil, degummed oil, and gum.

  1. X-ray spot film device

    International Nuclear Information System (INIS)

    Pury, T.; Tsen, M.L.S.; Gray, F.L.; Stehr, R.E.; Konle, R.L.

    1981-01-01

    Improvements are described in an X-ray spot film device which is used in conjunction with an X-ray table to make a selected number of radiographic exposures on a single film and to perform fluoroscopic examinations. To date, the spot film devices consist of two X-ray field defining masks, one of which is moved manually. The present device is more convenient to use and speeds up the procedure. (U.K.)

  2. Thermal Wave Imaging: Flying SPOT Camera.

    Science.gov (United States)

    Wang, Yiqian

    1993-01-01

    A novel "Flying Spot" infrared camera for nondestructive evaluation (NDE) and nondestructive characterization is presented. The camera scans the focal point of an unmodulated heating laser beam across the sample in a raster. The detector of the camera tracks the heating spot in the same raster, but with a time delay. The detector is thus looking at the "thermal wake" of the heating spot. The time delay between heating and detection is determined by the speed of the laser spot and the distance between it and the detector image. Since this time delay can be made arbitrarily small, the camera is capable of making thermal wave images of phenomena which occur on a very short time scale. In addition, because the heat source is a very small spot, the heat flow is fully three-dimensional. This makes the camera system sensitive to features, like tightly closed vertical cracks, which are invisible to imaging systems which employ full-field heating. A detailed theory which relates the temperature profile around the heating spot to the sample thermal properties is also described. The camera represents a potentially useful tool for measuring thermal diffusivities of materials by means of fitting the recorded temperature profiles to the theoretical curves with the diffusivity as a fitting parameter.

  3. Responses of interproximal plaque pH to snack foods and effect of chewing sorbitol-containing gum.

    Science.gov (United States)

    Jensen, M E

    1986-08-01

    Interproximal wire-telemetric plaque pH data were obtained from five volunteers after they ate milk chocolate bars, raisins, chocolate wafer cookies with cream filling, cupcakes with icing and cream filling, and cherry pies. All the foods produced rapid decreases in plaque pH for extended periods. In a second set of test sessions, volunteers chewed sugarless gum for 10 minutes, starting 15 minutes after they ate the snack food. In all cases, the gum chewing caused a rapid increase in plaque pH. The pH remained at a level considered safe for teeth for 30 minutes after chewing the gum.

  4. Possible recombinogenic effect of caprolactam in the mammalian spot test.

    Science.gov (United States)

    Fahrig, R

    1989-11-01

    Tests of caprolactam in the mouse spot test showed that treatment with this compound increased the frequency of color spots among animals treated in utero. The nature of these spots suggests that caprolactam may induce spots through the induction of mitotic recombination.

  5. 7 CFR 28.423 - Middling Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Middling Spotted Color. 28.423 Section 28.423... REGULATIONS COTTON CLASSING, TESTING, AND STANDARDS Standards Spotted Cotton § 28.423 Middling Spotted Color. Middling Spotted Color is color which is within the range represented by a set of samples in the custody of...

  6. Study of water vapour permeability of protein and gum-based edible films by a photothermal method

    Science.gov (United States)

    Tomás, S. A.; Saavedra, R.; Cruz, A.; Pedroza-Islas, R.; San Martín, E.

    2005-06-01

    The water vapour permeability of protein and gum-based edible films was studied by means of a photothermal method. The films were prepared with two basic ingredients, whey protein concentrate and mesquite gum, according to the proportions 75:25, 50:50, 25:75, and 0:100 (weight:weight). The water vapour diffusion coefficient of the analyzed films was found within the interval 0.37 × 10-6 to 2.04 × 10-6 cm^2/s, increasing linearly by increasing the mesquite gum composition in the films. The incorporation of mesquite gum in films produces less effective moisture barriers due to its highly hydrophilic property.

  7. In vitro and in vivo antimicrobial effects of mastic chewing gum against Streptococcus mutans and mutans streptococci.

    Science.gov (United States)

    Aksoy, Alev; Duran, Nizami; Koksal, Fatih

    2006-06-01

    Dental caries is associated with oral pathogens and Streptococcus mutans (S. mutans) is one of the primary cariogenic organisms. Mastic gum, from Pistacia lentiscus, has been shown to have antibacterial properties. The objective of this study was to determine antibacterial activity of mastic chewing gum against S. mutans and mutans streptococci in vitro and in vivo conditions. Cukurova University, Dental School, in 2002. Antimicrobial activity of mastic gum was evaluated using standard S. mutans strain by disc diffusion method in vitro. Cytotoxicity effect of mastic gum on HEp-2 cells was evaluated by conventional haemocytometer using the trypan blue exclusion method. Clinical studies were then performed on 25 periodontally healthy volunteers. The inhibitory effect of chewing mastic gum against mutans streptococci in saliva was compared to a placebo gum. Saliva samples were taken from the subjects immediately before and after chewing the mastic gum and the placebo gum for 15 min. Additional saliva samples were collected every 30 min. The samples were inoculated onto mitis salivarius-bacitracin agar and incubated for 48 h anaerobically at 37 degrees C. The total number of viable bacteria was then counted. Among tested solvents (chloroform, acetone, petrolium ether and ethanol), it was found that the acetone was found to be more convenient than the others to dissolve the mastic gum. In the cytotoxicity assay, concentrations up to 75 mg/ml of the mastic gum were not toxic for the replication of HEp-2 cells. Thus, lower concentrations of mastic gum (20 and 50 mg/ml) were used for the experiments. In vitro experiments, the diameters of growth inhibition zones of mastic gum were in the range 9.0-27.0 mm. In the clinical trials, the mean number of bacteria in samples taken after chewing the mastic gum and placebo gum were following; at minute 15 was 112 x 10(4)+/-268 x 10(3) and 175 x 10(4)+/-417 x 10(3)cfu/ml, for minute 45 was 85 x 10(4)+/-219 x 10(3) and 165 x 10

  8. The effect of medicated, sugar-free chewing gum on plaque and clinical parameters of gingival inflammation: a systematic review.

    Science.gov (United States)

    Keukenmeester, R S; Slot, D E; Putt, M S; Van der Weijden, G A

    2014-02-01

    This study aimed to systematically review the present literature to establish the clinical effect of medicated, sugar-free chewing gum on plaque indices and parameters of gingival inflammation. MEDLINE-PubMed, Cochrane CENTRAL and EMBASE databases were searched up to April 2012 to identify appropriate studies. Included studies used an intervention of medicated, sugar-free chewing gum containing antimicrobial agents or herbal extracts compared with a control gum. Plaque and gingivitis scores were selected as outcome variables. Independent screening of 594 unique titles and abstracts identified 10 non-brushing and four brushing studies that met the eligibility criteria. Means and standard deviations were extracted. A sufficient number of studies evaluated chlorhexidine gum to perform a meta-analysis. Although this review provides evidence for the comparative effectiveness of chewing gums containing various ingredients, the results must be weighed carefully against the methods that were used to assess their outcomes. Most of the chewing gums with antimicrobial agents or herbal extracts were shown to have a positive effect with respect to plaque and gingivitis scores. The most compelling evidence was provided for chewing gum containing chlorhexidine. Meta-analysis and individual results indicate a beneficial effect of chlorhexidine on plaque inhibition. However, GRADE evidence profile shows that the recommendation to use CHX-gum to reduce plaque scores in the absence of brushing is considered to be 'weak'. Other ingredients with positive outcomes on plaque scores are eucalyptus, acacia, funoran, Pycnogenol and mastic. Limited data with respect to gingivitis scores were available, and the following agents showed a positive effect: magnolia, eucalyptus and CHX. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  9. Effect of incorporation of pumpkin (Cucurbita moshchata) powder and guar gum on the rheological properties of wheat flour

    OpenAIRE

    Kundu, Himani; Grewal, Raj Bala; Goyal, Ankit; Upadhyay, Neelam; Prakash, Saurabh

    2012-01-01

    The present study was carried out to study the effect of incorporation of fibre rich pumpkin powder and guar gum on the farinographic characteristics of wheat flour. The flour and pumpkin powder were assessed for proximate composition, total dietary fibre, minerals and β-carotene. Pumpkin powder contained appreciable amount of fibre, minerals and β-carotene. The effects of incorporation of different levels of pumpkin powder and guar gum along with pumpkin powder on farinographic characteristi...

  10. Gum chewing inhibits the sensory processing and the propagation of stress-related information in a brain network.

    Directory of Open Access Journals (Sweden)

    Hongbo Yu

    Full Text Available Stress is prevalent in human life and threatens both physical and mental health; stress coping is thus of adaptive value for individual's survival and well-being. Although there has been extensive research on how the neural and physiological systems respond to stressful stimulation, relatively little is known about how the brain dynamically copes with stress evoked by this stimulation. Here we investigated how stress is relieved by a popular coping behavior, namely, gum chewing. In an fMRI study, we used loud noise as an acute stressor and asked participants to rate their feeling of stress in gum-chewing and no-chewing conditions. The participants generally felt more stressful when hearing noise, but less so when they were simultaneously chewing gum. The bilateral superior temporal sulcus (STS and the left anterior insula (AI were activated by noise, and their activations showed a positive correlation with the self-reported feeling of stress. Critically, gum chewing significantly reduced the noise-induced activation in these areas. Psychophysiological interaction (PPI analysis showed that the functional connectivity between the left AI and the dorsal anterior cingulate cortex (dACC was increased by noise to a lesser extent when the participants were chewing gum than when not chewing gum. Dynamic causality modeling (DCM demonstrated that gum chewing inhibited the connectivity from the STS to the left AI. These findings demonstrate that gum chewing relieves stress by attenuating the sensory processing of external stressor and by inhibiting the propagation of stress-related information in the brain stress network.

  11. Tests of fixity of the Indo-Atlantic hot spots relative to Pacific hot spots

    Science.gov (United States)

    Koivisto, Emilia A.; Andrews, David L.; Gordon, Richard G.

    2014-01-01

    Rates of inter-hot spot motion have been debated for decades. Herein we present updated predictions for the tracks of the Tristan da Cunha, Réunion, and Iceland hot spots assuming them to be fixed relative to Pacific hot spots. Uncertainties in Pacific hot spot rotations, which include uncertainties in the current locations of hot spots of 100-200 km, are combined with uncertainties in relative plate motions accumulated through the plate circuit to obtain the final uncertainty in the predicted positions (including uncertainties of 150-200 km in the current locations of the Indo-Atlantic hot spots). Improvements to reconstruction methods, to relative plate reconstructions, to age dates along the tracks, and to the geomagnetic reversal timescale lead to significant changes from prior results. When compared with the observed tracks, the predicted tracks indicate nominal rates of motion of only 2-6 mm a-1 of these Indo-Atlantic hot spots relative to Pacific hot spots over the past 48 Ma. Within the uncertainties, the rates range from no motion to rates as high as 8-13 mm a-1. For reconstructions prior to 48 Ma B.P., however, the apparent rates of inter-hot spot motion are much larger, 46-55 ± 20 mm a-1, if the motion occurred entirely between 68 Ma B.P. and 48 Ma B.P. Either hot spots moved rapidly before 48 Ma B.P., and slowed drastically at ≈ 48 Ma B.P., or global plate circuits through Antarctica become less reliable as one goes increasingly further into the past. Most paleomagnetic data favor the latter explanation.

  12. Preparation and In-Vitro Evaluation of Sustained Release Matrix Diclofenac Sodium Tablets Using HPMC KM 100 and Gums

    Directory of Open Access Journals (Sweden)

    Zafar Iqbal, Raza Khan, Fazli Nasir, Jamshaid Ali Khan, Lateef Ahmad, Abad Khan, Yaser Shah

    2010-12-01

    Full Text Available Objectives: The impact of hydroxypropylmethyl cellulose(HPMC K 100M alone and in combination with the guar gum,xanthan gum and gum tragacanth on the release of the diclofenac sodium matrix tablets were evaluated.Materials and Methods: The granules were prepared using wet granulation method and compressed into tablets using different ratio of drug and gum ratio. The physical properties of the tablets were within acceptable pharmacopeial limits.The release profiles of the matrix tablets were evaluated in vitro,using USP dissolution apparatus II (paddle method.Results: The formulations containing HPMC K 100M drug ratio1:1.3 and 1:1.6 and formulations containing HPMC, gum and drug with different ratio also sustained the release of diclofenac sodium for 12 hours. The mechanism of drug release from the matrix tablets was studied using Zero order, First order, Higuchi and Korsmeyer’s models using regression coefficient method. The stability of the selected formulations was evaluated at 40˚C and 70% RH for 6 months.Conclusions: HPMC K100M alone and in combination with natural gums as the retarding material retarded the release upto 12 hours and showed little deviation from the theoretical release pattern.

  13. The influence of guar gum on textural and sensory properties of rolls made from semi-finished frozen products

    Directory of Open Access Journals (Sweden)

    Pavlína Boudová Pečivová

    2014-07-01

    Full Text Available Textural and sensory properties of rolls produced from semi-finished frozen products with additions of guar gum were assessed. A commercial wheat flour T 512, ingredients such as yeast Saccharomyces cerevisiae, rapeseed oil, sodium chloride were used for preparing dough and final products. Guar gum and commercial additive Trial RC2 were used as additives for production. The textural properties of rolls were measured by a TA-XT Plus Texture Analyzer. All samples were evaluated by selected assessors. A five-point hedonic scale was used for evaluation characteristics such as taste, pliancy, texture, porosity, stickiness, gumminess, crispness and quality. The obtained data showed nonsignificant difference in moisture of rolls after baking and 3 days after baking. Control sample of rolls had higher firmness in comparison to other samples with guar gum after baking. Samples of rolls with higher addition of guar gum (10 g.kg-1 and 15 g.kg-1 had less firmness in comparison to control sample and sample with 5 g.kg-1 of guar gum. Sensory analysis showed negligible differences among all samples in monitored characteristics. Sensory assessors evaluated all samples as identical. Increased addition of guar gum in rolls led to the extension of shelf life (lower firmness at unchanged sensory properties of the rolls.

  14. The role of perioperative chewing gum on gastric fluid volume and gastric pH: a meta-analysis.

    Science.gov (United States)

    Ouanes, Jean-Pierre P; Bicket, Mark C; Togioka, Brandon; Tomas, Vicente Garcia; Wu, Christopher L; Murphy, Jamie D

    2015-03-01

    To determine if preoperative gum chewing affects gastric pH and gastric fluid volume. Systematic review and meta-analysis. Data sources included Cochrane, PubMed, and EMBASE databases from inception to June 2012 and reference lists of known relevant articles without language restriction. Randomized controlled trials in which a treatment group that chewed gum was compared to a control group that fasted were included. Relevant data, including main outcomes of gastric fluid volume and gastric pH, were extracted. Four studies involving 287 patients were included. The presence of chewing gum was associated with small but statically significant increases in gastric fluid volume (mean difference = 0.21 mL/kg; 95% confidence interval, 0.02-0.39; P = .03) but not in gastric pH (mean difference = 0.11 mL/kg; 95% confidence interval, -0.14 to 0.36; P = .38). Gastric fluid volume and gastric pH remained unchanged in subgroup analysis by either sugar or sugarless gum type. Chewing gum in the perioperative period causes small but statically significant increases in gastric fluid volume and no change in gastric pH. The increase in gastric fluid most likely is of no clinical significance in terms of aspiration risk for the patient. Elective surgery should not necessarily be canceled or delayed in healthy patients who accidentally chew gum preoperatively. Copyright © 2014 Elsevier Inc. All rights reserved.

  15. Spotting Stellar Activity Cycles in Gaia Astrometry

    Science.gov (United States)

    Morris, Brett M.; Agol, Eric; Davenport, James R. A.; Hawley, Suzanne L.

    2018-03-01

    Astrometry from Gaia will measure the positions of stellar photometric centroids to unprecedented precision. We show that the precision of Gaia astrometry is sufficient to detect starspot-induced centroid jitter for nearby stars in the Tycho-Gaia Astrometric Solution (TGAS) sample with magnetic activity similar to the young G-star KIC 7174505 or the active M4 dwarf GJ 1243, but is insufficient to measure centroid jitter for stars with Sun-like spot distributions. We simulate Gaia observations of stars with 10 year activity cycles to search for evidence of activity cycles, and find that Gaia astrometry alone likely can not detect activity cycles for stars in the TGAS sample, even if they have spot distributions like KIC 7174505. We review the activity of the nearby low-mass stars in the TGAS sample for which we anticipate significant detections of spot-induced jitter.

  16. GUM approach to uncertainty estimations for online 220Rn concentration measurements using Lucas scintillation cell

    International Nuclear Information System (INIS)

    Sathyabama, N.

    2014-01-01

    It is now widely recognized that, when all of the known or suspected components of errors have been evaluated and corrected, there still remains an uncertainty, that is, a doubt about how well the result of the measurement represents the value of the quantity being measured. Evaluation of measurement data - Guide to the expression of Uncertainty in Measurement (GUM) is a guidance document, the purpose of which is to promote full information on how uncertainty statements are arrived at and to provide a basis for the international comparison of measurement results. In this paper, uncertainty estimations following GUM guidelines have been made for the measured values of online thoron concentrations using Lucas scintillation cell to prove that the correction for disequilibrium between 220 Rn and 216 Po is significant in online 220 Rn measurements

  17. High yield production and purification of few layer graphene by gum arabic assisted physical sonication.

    Science.gov (United States)

    Chabot, Victor; Kim, Brian; Sloper, Brent; Tzoganakis, Costas; Yu, Aiping

    2013-01-01

    Exploiting the emulsification properties of low cost, environmentally safe Gum Arabic we demonstrate a high yield process to produce a few layer graphene with a low defect ratio, maintaining the pristine graphite structure. In addition, we demonstrate the need for and efficacy of an acid hydrolysis treatment to remove the polymer residues to produce 100% pure graphene. The scalable process gives yield of up to 5 wt% graphene based on 10 g starting graphite. The graphene product is compared with reduced graphene oxide produced through Hummer's method using UV-visible spectroscopy, SEM, TEM, and Raman spectroscopy. The two graphene materials show significant difference in these characterizations. Further, the film fabricated from this graphene exhibits 20 times higher electrical conductivity than that of the reduced graphene oxide. Sonication processing of graphite with environmentally approved biopolymers such as Gum Arabic opens up a scalable avenue for production of cheap graphene.

  18. Effect of dynamic high pressure on technological properties of cashew tree gum (Anacardium occidentale L.).

    Science.gov (United States)

    Porto, Bruna Castro; Augusto, Pedro E D; Terekhov, Anton; Hamaker, Bruce R; Cristianini, Marcelo

    2015-09-20

    Dynamic high pressure (DHP) appears to be an alternative approach to physical modification of polysaccharides aimed improving their technological properties. Therefore, its effect on the functional properties of polysaccharides (i.e., oil absorption capacity, emulsifier, and rheology) needs to be investigated. Cashew tree gum (CG) is a biological macromolecule that has been proposed to be used as an emulsifier in beverage emulsions. To the best of our knowledge, none of the articles in the literature investigates the effect of DHP on the CG properties. This work presents a study on the evaluation of the effects of DHP on functional characteristics of CG, including rheological properties, molecular weight, glycosyl-linkage analysis, solubility, swelling and oil absorption capacity (OAC). The results suggest that DHP is able to modify the technological properties of cashew tree gum (increasing solubility and decreasing apparent viscosity). Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Effectiveness of a GUM-compliant course for teaching measurement in the introductory physics laboratory

    International Nuclear Information System (INIS)

    Pillay, Seshini; Buffler, Andy; Lubben, Fred; Allie, Saalih

    2008-01-01

    An evaluation of a course aimed at developing university students' understanding of the nature of scientific measurement and uncertainty is described. The course materials follow the framework for metrology as recommended in the Guide to the Expression of Uncertainty in Measurement (GUM). The evaluation of the course is based on responses to written questionnaires administered to a cohort of 76 first year physics students both pre- and post-instruction, which were interpreted in terms of 'point' or 'set' reasoning. These findings are compared with responses from a control group of 70 students who completed a similar laboratory course apart from the use of traditional approaches to measurement and data analysis. The results suggest that the GUM framework, together with the specific teaching strategies described, provides opportunities for more effective learning of measurement and uncertainty in the introductory laboratory

  20. Preparation of tamarind gum based soft ion gels having thixotropic properties.

    Science.gov (United States)

    Sharma, Mukesh; Mondal, Dibyendu; Mukesh, Chandrakant; Prasad, Kamalesh

    2014-02-15

    Tamarind gum was used to prepare ion gels using both synthetic ionic liquids (ILs) namely 1-butyl-3-methylimidazolium chloride and 1-butyl-3-methylimidazolium bromide and bio-based ionic liquids (Bio-ILs) namely choline acrylate, choline caproate and choline caprylate by heating cooling process. The gels were found to have good thermal stability and exhibited thixotropic behaviour. Upon relaxation after applied breaking strain, the recovery of gel structures after ten consecutive cycles was observed. The hydrogel of the gum prepared using ethanol aqueous solution had much inferior quality in terms of viscosity, viscoelasticity, thermal stability and thixotropicity when compared with the ion gels. The ion gels also showed very good adherence to human finger muscles and skin. The ion gels thus prepared may find application in electrochemistry, sensors, actuators and the gels prepared with Bio-ILs could even be useful in biomedical applications. Copyright © 2013 Elsevier Ltd. All rights reserved.

  1. EFFECT OF GUM CHEWING ON AIR SWALLOWING, SALIVA SWALLOWING AND BELCHING

    Directory of Open Access Journals (Sweden)

    Ana Cristina Viana da SILVA

    2015-09-01

    Full Text Available BackgroundEructation is a physiologic event which allows gastric venting of swallowed air and most of the time is not perceived as a symptom. This is called gastric belching. Supragastric belching occurs when swallowed air does not reach the stomach and returns by mouth a short time after swallowing. This situation may cause discomfort, life limitations and problems in daily life.ObjectiveOur objective in this investigation was to evaluate if gum chewing increases the frequency of gastric and/or supragastric belches.MethodsEsophageal transit of liquid and gas was evaluated by impedance measurement in 16 patients with complaint of troublesome belching and in 15 controls. The Rome III criteria were used in the diagnosis of troublesome belching. The esophageal transit of liquid and gas was measured at 5 cm, 10 cm, 15 cm and 20 cm from the lower esophageal sphincter. The subjects were evaluated for 1 hour which was divided into three 20-minute periods: (1 while sitting for a 20-minute base period; (2 after the ingestion of yogurt (200 mL, 190 kcal, in which the subjects were evaluated while chewing or not chewing gum; (3 final 20-minute period in which the subjects then inverted the task of chewing or not chewing gum. In gastric belch, the air flowed from the stomach through the esophagus in oral direction and in supragastric belch the air entered the esophagus rapidly from proximal and was expulsed almost immediately in oral direction. Air swallows were characterized by an increase of at least 50% of basal impedance and saliva swallow by a decrease of at least 50% of basal impedance, that progress from proximal to distal esophagus.ResultsIn base period, air swallowing was more frequent in patients than in controls and saliva swallowing was more frequent in controls than in patients. There was no difference between the medians of controls and patients in the number of gastric belches and supragastric belches. In six patients, supragastric belches

  2. Encapsulation of Aloe Vera extract into natural Tragacanth Gum as a novel green wound healing product.

    Science.gov (United States)

    Ghayempour, Soraya; Montazer, Majid; Mahmoudi Rad, Mahnaz

    2016-12-01

    Application of natural materials in wound healing is an interest topic due to effective treatment with no side effects. In this paper, Aloe Vera extract was encapsulated into Tragacanth Gum through a sonochemical microemulsion process to prepare a wound healing product. FESEM/EDX and FT-IR proved the successfully formation of the nanocapsules with spherical shape by cross-linking aluminum ions with Tragacanth Gum. The therapeutic characteristics of the prepared wound healing product were investigated using antimicrobial, cytotoxicity and wound healing assays. Relative high antimicrobial activities with the microbial reduction of 84, 91 and 80% against E. coli, S. aureus and C. albicans, a cell viability of 98% against human fibroblast cells and a good wound healing activity with considerable migration rate of fibroblast cells are the important advantages of the new formed wound healing product. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Guar gum/borax hydrogel: Rheological, low field NMR and release characterizations

    Directory of Open Access Journals (Sweden)

    M. Grassi

    2013-09-01

    Full Text Available Guar gum (GG and Guar gum/borax (GGb hydrogels are studied by means of rheology, Low Field Nuclear Magnetic Resonance (LF NMR and model drug release tests. These three approaches are used to estimate the mesh size (ζ of the polymeric network. A comparison with similar Scleroglucan systems is carried out. In the case of GGb, the rheological and Low Field NMR estimations of ζ lead to comparable results, while the drug release approach seems to underestimate ζ. Such discrepancy is attributed to the viscous effect of some polymeric chains that, although bound to the network to one end, can freely fluctuate among meshes. The viscous drag exerted by these chains slows down drug diffusion through the polymeric network. A proof for this hypothesis is given by the case of Scleroglucan gel, where the viscous contribution is not so significant and a good agreement between the rheological and release test approaches was found.

  4. Synthesis of carbamoylethyl Cassia angustifolia seed gum in an aqueous medium.

    Science.gov (United States)

    Rajput, Gaurav; Pandey, I P; Joshi, H C

    2016-01-20

    The Cassia angustifolia seed gum (CAG), a galactomannan, isolated from the seeds of C. angustifolia was subjected to the carbamoylethylation which involved the reaction of CAG with acrylamide in an aqueous medium (water) in the presence of alkali (NaOH) as a catalyst. Alkali concentration, acrylamide concentration, liquor:gum ratio as well as reaction temperature and time were found to affect the extent of carbamoylethylation of CAG (expressed in terms of nitrogen content) and so, these were optimized. Degree of substitution (DS) and reaction efficiency was also determined. FTIR revealed the successful carbamoylethylation of CAG and rheological study conducted on 1 and 2% (w/w) solutions of the carbamoylethyl-CAG not only brought out the non-Newtonian pseudoplastic behaviour, but also high stability of carbamoylethyl-CAG solutions in comparison to solutions of the unmodified CAG. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Physical Stability of Oil in Water Emulsions in the Presence of Gamma Irradiated Gum Tragacanth

    DEFF Research Database (Denmark)

    Meybodi, Neda Mollakhalili; Mohammadifar, Mohammad Amin; Farhoodi, Mehdi

    2017-01-01

    Gum tragacanth (GT) exuded from an Iranian Astragalus species was γ-irradiated at 0, 0.75, 1.5, 3, 5, 7, 10 kGy and used to stabilize a model oil in water emulsion system. Stability and physicochemical properties of emulsion samples were investigated with respect to the effect of irradiation....... Emulsions were prepared by homogenizing 10% w/w sun flower oil with 90% w/w aqueous gum dispersions and stored quiescently at 25°C for 120 days. Results indicated that using 1.5 kGy irradiated GT was more effective in providing optimum values of apparent viscosity, number mean diameter, electrosteric...... repulsion and structure strength for getting maximum emulsion stability. GT significantly reduced the interfacial tension of the oil and water system, but no significant differences were observed among all irradiation treated and non-irradiated samples. This study revealed that, GT acts as a bifunctional...

  6. Recent trends on gellan gum blends with natural and synthetic polymers: A review.

    Science.gov (United States)

    Zia, Khalid Mahmood; Tabasum, Shazia; Khan, Muhammad Faris; Akram, Nadia; Akhter, Naheed; Noreen, Aqdas; Zuber, Mohammad

    2018-04-01

    Gellan gum (GG), a linear negatively charged exopolysaccharide,is biodegradable and non-toxic in nature. It produces hard and translucent gel in the presence of metallic ions which is stable at low pH. However, GG has poor mechanical strength, poor stability in physiological conditions, high gelling temperature and small temperature window.Therefore,it is blended with different polymers such as agar, chitosan, cellulose, sodium alginate, starch, pectin, polyanaline, pullulan, polyvinyl chloride, and xanthan gum. In this article, a comprehensive overview of combination of GG with natural and synthetic polymers/compounds and their applications in biomedical field involving drug delivery system, insulin delivery, wound healing and gene therapy, is presented. It also describes the utilization of GG based materials in food and petroleum industry. All the technical scientific issues have been addressed; highlighting the recent advancement. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. High Temperature Stable Separator for Lithium Batteries Based on SiO₂ and Hydroxypropyl Guar Gum.

    Science.gov (United States)

    Carvalho, Diogo Vieira; Loeffler, Nicholas; Kim, Guk-Tae; Passerini, Stefano

    2015-10-23

    A novel membrane based on silicon dioxide (SiO₂) and hydroxypropyl guar gum (HPG) as binder is presented and tested as a separator for lithium-ion batteries. The separator is made with renewable and low cost materials and an environmentally friendly manufacturing processing using only water as solvent. The separator offers superior wettability and high electrolyte uptake due to the optimized porosity and the good affinity of SiO₂ and guar gum microstructure towards organic liquid electrolytes. Additionally, the separator shows high thermal stability and no dimensional-shrinkage at high temperatures due to the use of the ceramic filler and the thermally stable natural polymer. The electrochemical tests show the good electrochemical stability of the separator in a wide range of potential, as well as its outstanding cycle performance.

  8. Plasticiser Effect on Water Vapour Permeability Properties of Locust bean gum--Based Edible Films

    OpenAIRE

    BOZDEMİR, Özgür Altan; TUTAŞ, Mehmet

    2014-01-01

    The barrier properties of edible films prepared from polysaccharide polymer (locust bean gum) and various plasticisers (glycerol, propylene glycol, sorbitol, and polyethylene glycol 200) together with hydrophobic modifiers (stearopten and beeswax) were examined. It was determined that the films containing polyethylene glycol 200 (PEG 200) and sorbitol have the lowest water vapour permeability values and the films containing glycerol have the highest WVP values. It was found that the ...

  9. Phosphorus use efficiency of the gum arabi tree (Acacia senegal (L) Willd) in Sudan

    International Nuclear Information System (INIS)

    Elamin, K.H.; Mustafa, A.F.

    1996-01-01

    This study was conducted to identify gum arabic tree (Acacia senegal L. Willd) provenances with high efficiency for phosphorus uptake and use. Thirteen provenances were collected from different habitats with the gum belt of the Sudan. A preliminary trial was conducted during the period 1989-1992 at the Gezira Agricultural Research Station in Wad Medani. This study revealed that there are clear genotypic differences in phosphorus use efficiency, nitrogen yield and dry matter production. All the provenances tested also exhibited a high ability for survival under the dry climatic conditions as prevailing in the gum belt of Sudan. Based on differences in phosphorus use efficiency observed in the preliminary study, 4 provenances were selected for a detailed study. Provenance 11 and 2 represented the highly efficient group, provenance 7 the moderately efficient group and provenance 13 the low efficient group. The detailed study revealed that provenance 11 is superior to all others in terms of biomass production as well as in phosphorus use efficiency. Although the ability to take up phosphorus was low, this was compensated by having a high root length density enabling the tree to take up a quantity of phosphorus similar to that taken up by other provenances. The high ability to convert the absorbed phosphorus into a greater quantity of dry matter made this provenance the best in phosphorus use efficiency. These results suggest that provenance 11 may be a suitable candidate to be introduced into the gum belt of Sudan in support of its rehabilitation programme. (author). 13 refs, 4 figs, 5 tabs

  10. Interpenetrating networks of carboxymethyl tamarind gum and chitosan for sustained delivery of aceclofenac

    OpenAIRE

    MALI, Kailas Krishnat; C DHAWALE, Shashikant; J DIAS, Remeth; D HAVALDAR, Vijay; R KAVITAKE, Pankaj

    2018-01-01

    The aim of present investigation was to characterizecarboxymethyl tamarind gum (CMTG) based interpenetratingnetworks (IPNs) of aceclofenac for site specific sustained delivery.The drug loaded IPNs were prepared by using chitosan andCMTG as polymers and gluteraldehyde as crosslinking agent.The IPNs were characterized by Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, thermalanalysis, X-ray powder diffraction and solid state 13C-nuclearmagnetic resonance spectro...

  11. Antimicrobial and Attractant Roles for Chemerin in the Oral Cavity during Inflammatory Gum Disease

    OpenAIRE

    Godlewska, Urszula; Brzoza, Piotr; Sroka, Aneta; Majewski, Pawel; Jentsch, Holger; Eckert, Martin; Eick, Sigrun; Potempa, Jan; Zabel, Brian A.; Cichy, Joanna

    2017-01-01

    Periodontal inflammation is one of the most common chronic inflammatory conditions in humans. Despite recent advances in identifying and characterizing oral microbiota dysbiosis in the pathogenesis of gum disease, just how host factors maintain a healthy homeostatic oral microbial community or prevent the development of a pathogenic oral microbiota remains poorly understood. An important determinant of microbiota fate is local antimicrobial proteins. Here, we report that chemoattractant prote...

  12. Deformation analysis of gellan-gum based bone scaffold using on-the-fly tomography

    Czech Academy of Sciences Publication Activity Database

    Kytýř, Daniel; Zlámal, Petr; Koudelka_ml., Petr; Fíla, Tomáš; Krčmářová, Nela; Kumpová, Ivana; Vavřík, Daniel; Gantar, A.; Novak, S.

    2017-01-01

    Roč. 134, November (2017), s. 400-417 ISSN 0264-1275 EU Projects: European Commission(XE) ATCZ38 - Com3d-XCT; European Commission(XE) ATCZ133 Keywords : on-the-fly tomography * gellan-gum * scaffold * digital volume correlation * compression Subject RIV: JJ - Other Materials OBOR OECD: Materials engineering Impact factor: 4.364, year: 2016 http://www.sciencedirect.com/science/article/pii/S026412751730789X

  13. The effect of gum Arabic oral treatment on the iron and protein status ...

    African Journals Online (AJOL)

    The effect of gum Arabic oral treatment on the iron and protein status in chronic renal failure patients under regular hemodialysis in Central Sudan L'effet du traitement oral par de la gomme arabe sur le statut martial et de protéinémie chez les patients en insuffisance rénale chronique sous hémodialyse régulière au Soudan ...

  14. Conservation of minimally processed apples using edible coatings made of turnip extract and xanthan gum

    Directory of Open Access Journals (Sweden)

    Caroline Dellinghausen Borges

    2016-01-01

    Full Text Available Summary The objective of this study was to evaluate the potential of turnip extract and xanthan gum in the conservation of minimally processed apples. The apples were washed, sanitized with sodium hypochlorite (200 ppm for 15 minutes, peeled, and cut into eight pieces prior to being subjected to one of the following treatments in aqueous solution: A – water (control; B – turnip extract; C – turnip extract and CaCl2; D – xanthan gum, CaCl2 and glycerol; E – turnip extract, xanthan gum, CaCl2, and glycerol. Subsequently, the freshly cut apples were dried under ventilation on nylon screens to ensure drying of the coatings, and then packed in polystyrene trays, covered with polyvinylchloride films and stored at 4 ± 1 ° C for 13 days. The following parameters were evaluated: mass loss, firmness, colouration, pH value, soluble solids, and peroxidase/polyphenoloxidase activities. The edible coatings were found to be ineffective with respect to controlling mass loss, but the minimally processed apples coated with turnip extract maintained their initial levels of colouration, firmness and pH value. A considerable increase in peroxidase activity was registered for apples treated with turnip extract, suggesting that this effect may also be responsible for the reduction in browning. No advantage could be observed for the simultaneous presence of turnip extract and xanthan gum or calcium chloride. The turnip extract may represent an interesting alternative for applications to minimally processed apples, especially as it is a natural product, easily obtained, cost effective and contributes to the nutritional quality (e.g. as a source of calcium ions.

  15. Sweet Spot Supersymmetry and Composite Messengers

    International Nuclear Information System (INIS)

    Ibe, Masahiro; Kitano, Ryuichiro

    2007-01-01

    Sweet spot supersymmetry is a phenomenologically and cosmologically perfect framework to realize a supersymmetric world at short distance. We discuss a class of dynamical models of supersymmetry breaking and its mediation whose low-energy effective description falls into this framework. Hadron fields in the dynamical models play a role of the messengers of the supersymmetry breaking. As is always true in the models of the sweet spot supersymmetry, the messenger scale is predicted to be 10 5 GeV ∼ mess ∼ 10 GeV. Various values of the effective number of messenger fields N mess are possible depending on the choice of the gauge group

  16. Volume dips; spot price ranges narrow

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    This article is the September 1994 uranium market summary. Volume in the spot concentrates market fell below 1 million lbs U3O8. In total, twelve deals took place compared to 28 deals in August. Of the twelve deals, three took place in the spot concentrates market, two took place in the medium and long-term market, three in the conversion market, and four in the enrichment market. Restricted prices weakened, but unrestricted prices firmed slightly. The enrichment price range narrowed a bit

  17. Fast Keyword Spotting in Telephone Speech

    Directory of Open Access Journals (Sweden)

    J. Nouza

    2009-12-01

    Full Text Available In the paper, we present a system designed for detecting keywords in telephone speech. We focus not only on achieving high accuracy but also on very short processing time. The keyword spotting system can run in three modes: a an off-line mode requiring less than 0.1xRT, b an on-line mode with minimum (2 s latency, and c a repeated spotting mode, in which pre-computed values allow for additional acceleration. Its performance is evaluated on recordings of Czech spontaneous telephone speech using rather large and complex keyword lists.

  18. Badam gum: a natural polymer in mucoadhesive drug delivery. Design, optimization, and biopharmaceutical evaluation of badam gum-based metoprolol succinate buccoadhesive tablets.

    Science.gov (United States)

    Mylangam, Chaithanya Krishna; Beeravelli, Sudhakar; Medikonda, Jyothi; Pidaparthi, Jagannadha Subrahmanyam; Kolapalli, Venkata Ramana Murthy

    2016-01-01

    Applicability of natural polymers in pharmaceutical drug delivery. The objective of the present investigation was to evaluate the applicability of badam gum (BG) obtained from Terminalia catappa LINN, belongs to the family combretaceae as a buccoadhesive polymer using metoprolol succinate as a model drug. Tablets were prepared by wet granulation technique. Compression coating technique was employed for the preparation of unidirectional release buccal tablets using cellulose acetate as an impermeable backing layer. Muco/buccoadhesive properties of the BG were increased with the increase in the concentration of polymer which was evident form the detachment force measurement, ex vivo residence time, and swelling studies. MBG 2 was found to be the optimized formulation based on drug dissolution studies and bioadhesion studies. FTIR and DSC studies performed on the optimized formulation indicated no drug-polymer interaction. MBG 2 was found to be stable after accelerated stability testing for 6 months as per ICH guidelines. Pharmacokinetic studies of the optimized formulation were performed in six healthy human volunteers in comparison with that of the commercial extended release oral tablet GUDPRESS XL-25 by estimating pharmacokinetic parameters and mean residence time (MRT). It was found that there is a significant increase in the bioavailability of metoprolol succinate from BG formulation which was evident from the high AUC and MRT values compared with the commercial formulation. The above results clearly indicated that badam gum can be used as a mucoadhesive polymer for buccal drug delivery.

  19. Starch-based edible film with gum arabic for fruits coating

    Science.gov (United States)

    Razak, Aqeela Salfarina; Lazim, Azwan Mat

    2015-09-01

    Packaging waste forms a significant part of municipal solid waste and has caused increasing environmental concerns, resulting in a strengthening of various regulations aimed at reducing the amounts generated. The introduction of biodegradable materials such as edible film and coating which can be disposed directly into the soil, can be one possible solution to this problem. Edible coating is defined as a thin layer of edible material form as a film on the surface of the fruits and vegetables. This coating can affect the respiration and moisture loss. In this study, edible film and coating were used as fruit coating. The edible film were prepared with different ratios which is 2:2, 3:1, and 1:3 of starch and gum Arabic with 10% of glycerol and sorbitol as plasticiser. A study of practical application for the edible film and coating from starch with gum Arabic for fruit coating was conducted. Banana were coated with an aqueous solution of starch with gum Arabic and stored at ambient temperature (26 ± 1°C; 70 ± 10% RH). The results indicate that with the coating application, the fruits lost about 30% less weight than the uncoated fruits. The coating application was also effective in retaining the firmness of the banana and slow down the ripening process.

  20. Pharmacology and Phytochemistry of Oleo-Gum Resin of Commiphora wightii (Guggulu

    Directory of Open Access Journals (Sweden)

    Prerna Sarup

    2015-01-01

    Full Text Available Guggulu is an oleo-gum resin which exudes out as a result of injury from the bark of Commiphora wightii (Arnott Bhandari [syn.  Commiphora mukul (Hook. Ex Stocks Engl; Balsamodendron mukul (Hook. Ex Stocks; Family, Burseraceae]. It has been used in the Ayurveda since time immemorial for the treatment of variety of disorders such as inflammation, gout, rheumatism, obesity, and disorders of lipids metabolism. It is a mixture of phytoconstituents like volatile oil which contains terpenoidal constituents such as monoterpenoids, sesquiterpenoids, diterpenoids, and triterpenoids; steroids; flavonoids; guggultetrols; lignans; sugars; and amino acids. This review is an effort to compile all the information available on all of its chemical constituents which are responsible for its therapeutic potential. The wild occurrence of this species is restricted mainly to the dry regions of Rajasthan and Gujarat States of India, and the bordering regions of Pakistan. Oleo-gum resin, guggulu, tapped from the stems of this species, is consumed in high volumes by the Indian herbal industries. There has been a decline in its wild population over the last several decades, as a result of habitat loss and degradation, coupled with unregulated harvesting and tapping of oleo-gum resin. This species is consequently assessed as Critically Endangered and enlisted in the IUCN red list of threatened species.

  1. Gum ghatti based novel electrically conductive biomaterials: A study of conductivity and surface morphology

    Directory of Open Access Journals (Sweden)

    S. Kalia

    2014-04-01

    Full Text Available Gum ghatti-cl-poly(acrylamide-aniline interpenetrating network (IPN was synthesized by a two-step aqueous polymerization method, in which aniline monomer was absorbed into the network of gum ghatti-cl-poly(acrylamide and followed by a polymerization reaction between aniline monomers. Initially, semi-IPN based on acrylamide and gum ghatti was prepared by free-radical copolymerization in aqueous media with optimized process parameters, using N,N'-methylenebis-acrylamide, as cross-linker and ammonium persulfate, as an initiator system. Optimum reaction conditions affording maximum percentage swelling were: solvent [mL] =12, Acrylamide (AAm [mol•L–1] = 1.971, Ammonium peroxydisulfate (APS [mol•L–1] = 0.131•10–1, N,N'-methylene-bis-acrylamide (MBA [mol•L–1] = 0.162•10–1, reaction time [min] = 210, temperature [°C] = 100 and pH = 7.0. The resulting IPN was doped with different protonic acids. The effect of the doping has been investigated on the conductivity and surface morphology of the IPN hydrogel. The maximum conductivity was observed with 1.5N HClO4 concentration. The morphological, structural and electrical properties of the candidate polymers were studied using scanning electron micrscopy (SEM, Fourier transform infrared spectroscopy FTIR and two-probe method, respectively.

  2. Carboxymethyl guar gum nanoparticles for drug delivery applications: Preparation and preliminary in-vitro investigations

    International Nuclear Information System (INIS)

    Dodi, G.; Pala, A.; Barbu, E.; Peptanariu, D.; Hritcu, D.; Popa, M.I.; Tamba, B.I.

    2016-01-01

    Carboxymethyl guar gum (CMGG) synthesized from commercially available polysaccharide was formulated into nanoparticles via ionic gelation using trisodium trimetaphosphate (STMP) as cross-linking agent. Characterisation using a range of analytical techniques (FTIR, NMR, GPC, TGA and DLS) confirmed the CMGG structure and revealed the effect of the CMGG and STMP concentration on the main characteristics of the obtained nanoformulations. The average nanoparticle diameter was found to be around 208 nm, as determined by dynamic light scattering (DLS) and confirmed by scanning electron microscopy (SEM) and nanoparticle tracking analysis (NTA). Experiments using simulated gastric and intestinal fluids evidenced significant pH-dependent drug release behaviour of the nanoformulations loaded with Rhodamine B (RhB) as a model drug (loading capacity in excess of 83%), as monitored by UV–Vis. While dose-dependent cytotoxicity was observed, the nanoformulations appeared completely non-toxic at concentrations below 0.3 mg/mL. Results obtained so far suggest that carboxymethylated guar gum nanoparticles formulated with STMP warrant further investigations as polysaccharide based biocompatible drug nanocarriers. - Highlights: • Carboxymethyl guar gum nanoparticles preparation by ionic gelation • The optimum synthesis system designed particles around 200 nm • The nanoformulations appeared completely non-toxic at specific concentrations • The loaded formulations evidenced significant pH-dependent drug release behaviour • The results encourage further investigations as polysaccharidic drug nanocarriers

  3. Green Fabrication of Silver Nanoparticles by Gum Tragacanth (Astragalus gummifer: A Dual Functional Reductant and Stabilizer

    Directory of Open Access Journals (Sweden)

    Aruna Jyothi Kora

    2012-01-01

    Full Text Available A simple and ecofriendly procedure have been devised for the green synthesis of silver nanoparticles using the aqueous extract of gum tragacanth (Astragalus gummifer, a renewable, nontoxic natural phyto-exudate. The water soluble components in the gum act as reductants and stabilizers. The generated nanoparticles were analyzed using UV-visible spectroscopy, transmission electron microscopy, X-ray diffraction, Fourier transform-infrared spectroscopy, and Raman spectroscopy. The role of gum concentration and reaction time on the synthesis of nanoparticles was studied. By regulating the reaction conditions, spherical nanoparticles of 13.1±1.0 nm size were produced. Also, the possible functional groups involved in reduction and capping of nanoparticles has been elucidated. The antibacterial activity of the fabricated nanoparticles was tested on model Gram-negative and Gram-positive bacterial strains with well-diffusion method. These nanoparticles exhibited considerable antibacterial activity on both the Gram classes of bacteria, implying their potential biomedical applications.

  4. Hybrid nanomaterials based on gum Arabic and magnetite for hyperthermia treatments.

    Science.gov (United States)

    Horst, M Fernanda; Coral, Diego F; Fernández van Raap, Marcela B; Alvarez, Mariana; Lassalle, Verónica

    2017-05-01

    In this study, one-step co-precipitation method was conveniently adapted to obtain novel nanomaterials based on Gum Arabic and magnetite. Two synthesis procedures were evaluated: one employing the solid biopolymer in the co-precipitation media; a second using an aqueous solution of the polysaccharide. An exhaustive characterization of both formulations was performed using several specific techniques. The obtained data confirmed the successful incorporation of the gum Arabic on the magnetic core. Values of hydrodynamic diameters, measured by dynamic light scattering, in aqueous dispersions were about 70-80nm, while sizes lower than 20nm were registered by TEM microscopy. Surface charge of gum Arabic coated magnetic nanoparticles was significantly different from the corresponding to raw materials (magnetite and GA). This fact confirmed the formation of hybrid nanosystems with novel and specific properties. The potential utility of these materials was tested regarding to magnetic hyperthermia therapy under radiofrequency fields. Magnetocalorimetric measurements were performed in a wide range of field amplitude and frequency. Specific absorption rate of 218W/gFe was determined at field frequency of 260kHz and amplitude of 52kA/m. These results demonstrate their viability to be applied in tumor ablation treatments. Using the linear response theory and restricting field parameters to the accepted biomedical window, maximum useful value of 74w/gFe is predicted at 417kHz and 12kA/m. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. The Effect of Xanthan Gum and Flaxseed Mucilage as Edible Coatings in Cheddar Cheese during Ripening

    Directory of Open Access Journals (Sweden)

    Afshin Soleimani-Rambod

    2018-02-01

    Full Text Available The object of this study was to investigate the possibility of using xanthan gum and flaxseed mucilage as edible coatings for Cheddar cheese during ripening for 90 days. Five samples of Cheddar cheese blocks were coated with different coating materials in triplicate as follows: Coated with polyvinyl acetate as control (C, coated with 0.5% xanthan gum (XG, coated with 0.75% flaxseed mucilage (FM1, coated with 1% flaxseed mucilage (FM2, and coated with 1.25% flaxseed mucilage (FM3. All samples were kept at 8 ± 2 °C in a cold room for 90 days. The statistical analysis of the results showed that the moisture content of the samples decreased and the protein content increased during the ripening period (P < 0.01. The pH, acidity, fat in dry matter, and TCA-SN/TN of samples were significantly affected by xanthan gum and flaxseed mucilage treatment (P < 0.01. The free fatty acid composition of samples was significantly affected by edible coatings. Edible coatings affected the growth of non-starter lactic acid bacteria and the total mesophilic aerobic bacteria in a non-significant manner (P > 0.01. The growth of starter bacteria was significantly altered under the effect of edible coating materials (P < 0.05. Tyrosine and tryptophan contents as an index of proteolysis, lipolysis, and sensory evaluation of samples were not significantly different.

  6. Comparative study of gum arabic and PVP as stabilizing agents for synthesis of gold nanoparticles

    International Nuclear Information System (INIS)

    Silva, Andressa A.; Leal, Jessica; Geraldes, Adriana N.; Lugao, Ademar B.

    2015-01-01

    Use Colloidal metallic nanoparticles such as gold nanoparticles have received a great attention, due in part to their specific properties and potential applications. Control of size and uniformity of nanoparticles is important to prevent aggregation. High-molecular-weight polymers were used as stabilizer agents. Natural polymers, such as gum Arabic, are used as stabilizer because of capping nanoparticles behavior and present advantages such as solubility, non- toxicity and its compatibility for pharmaceutical and biomedical applications. Previous studies showed that the hydrophilic group of Poly(vinyl pyrrolidone) (PVP) caused repulsion on gold nanoparticles surface because steric interactions with polymer, for this reason this kind of polymers could be used as stabilizer agent. The aim of this work is to study the synthesis and stabilization of gold nanoparticles with PVP and gum Arabic using gamma radiation. The results obtained by samples analysis using UV-Visible showed that the gamma irradiation doses influenced the nanoparticles formation by PVP but that is not the case with the GA, because for smaller quantity of Arabic gum in different doses produced and stabilized nanoparticles. The samples were observed for 20 days and showed stability. We have obtained preliminary results showed that the use of radiation is applicable to the formation of gold nanoparticles. (author)

  7. Synthesis of partially hydrolyzed graft copolymer (H-Ipomoea hederacea seed gum-g-polyacrylonitrile).

    Science.gov (United States)

    Yadav, Mithilesh; Singh, Somit Kumar; Rhee, Kyong Yop

    2013-06-05

    Polyacrylonitrile was grafted to Ipomoea hederacea (Ih) seed gum with 138.5% grafting yield and 43.55% grafting efficiency in a procedure that was performed under homogeneous microwave (MW) irradiation conditions for 70s in the absence of a radical initiator. Under similar conditions, a maximum grafting yield of 108% and 33.96% efficiency was achieved when the K2S2O8/ascorbic acid redox system was used as a radical initiator in a thermostatic water bath at 35 °C. The effects of reaction variables, such as monomer/Ih seed gum concentration, MW power, and exposure time on the graft copolymerization were studied. The partially hydrolyzed graft copolymer (H-Ih-g-PAN) formed a loose, porous surface and improved the water absorbency of Ih seed gum. The swelling behavior of H-Ih-g-PAN in various ionic salt (NaCl, MgCl2 and Na2SO4) solutions was also systematically investigated. The graft copolymer was further characterized using FTIR, TGA, XRD, and SEM. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. Pressure cell assisted solubilization of xyloglucans: tamarind seed polysaccharide and detarium gum.

    Science.gov (United States)

    Picout, David R; Ross-Murphy, Simon B; Errington, Neil; Harding, Stephen E

    2003-01-01

    To improve the solubilization of two water-soluble xyloglucans, tamarind seed polysaccharide and detarium gum, by reducing substantially molecular aggregation, a "pressure cell" heating method was used. Conditions allowing solubilization and chain depolymerization were produced by varying appropriately the pressure, time, and temperature applied. The various MW fractions of solubilized xyloglucans were characterized by capillary viscometry and light scattering techniques in order to extract, with reliability, fundamental macromolecular parameters. Mark-Houwink and Flory exponents were found to be 0.67 +/- 0.04 and 0.51 +/- 0.06, respectively for both xyloglucan data combined, consistent with linear random coil behavior. A detailed analysis of the data seems to suggest that tamarind gum solutions are slightly perturbed by the effect of excluded volume, whereas detarium gum samples are close to the theta state. Chain flexibility parameters such characteristic ratio, C( proportional, variant ), and persistence length, L(p), were calculated for tamarind and detarium using the Burchard-Stockmayer-Fixman (BSF) geometric method. L(p) values of 6-8 nm were estimated for xyloglucans. The seemingly linear structure of tamarind and detarium, as suggested by the value of the Mark-Houwink and Flory exponents obtained, follows from analysis of the data by the classical Zimm method but not when employing the square root or Berry method which suggests a more branched chain profile. This was the approach adopted in our previous work on the characterization of detarium samples.

  9. Different nitrogen sources change the transcriptome of welan gum-producing strain Sphingomonas sp. ATCC 31555.

    Science.gov (United States)

    Xu, Xiaopeng; Nie, Zuoming; Zheng, Zhiyong; Zhu, Li; Zhang, Hongtao; Zhan, Xiaobei

    2017-09-01

    To reveal effects of different nitrogen sources on the expressions and functions of genes in Sphingomonas sp. ATCC 31555, it was cultivated in medium containing inorganic nitrogen (IN), organic nitrogen (ON), or inorganic-organic combined nitrogen (CN). Welan gum production and bacterial biomass were determined, and RNA sequencing (RNA-seq) was performed. Differentially expressed genes (DEGs) between the different ATCC 31555 groups were identified, and their functions were analyzed. Welan gum production and bacterial biomass were significantly higher in the ON and CN groups compared with those in the IN group. RNA-seq produced 660 unigenes, among which 488, 731, and 844 DEGs were identified between the IN vs. ON, IN vs. CN, and ON vs. CN groups, respectively. All the DEGs were related significantly to metabolic process and signal transduction. DEGs between the IN vs. CN and ON vs. CN groups were potentially associated with bacterial chemotaxis. Real-time PCR confirmed the expressions of selected DEGs. Organic nitrogen led to higher bacterial biomass and welan gum production than inorganic nitrogen, which might reflect differences in gene expression associated with metabolic process, signal transduction, and bacterial chemotaxis induced by different nitrogen sources.

  10. Facile synthesis of palladium nanocatalyst using gum kondagogu (Cochlospermum gossypium): a natural biopolymer.

    Science.gov (United States)

    Rastogi, Lori; Beedu, Sashidhar Rao; Kora, Aruna Jyothi

    2015-12-01

    Palladium nanoparticles (Pd NPs) were synthesised by using gum kondagogu (GK), a non-toxic ecofriendly biopolymer. GK acted as both reducing and stabilising agent for the synthesis of Pd NPs. Various reaction parameters, such as concentration of gum, Pd chloride and reaction pH were standardised for the stable synthesis of GK reduced stabilised Pd NPs (GK-Pd NPs). The nanoparticles have been characterised using ultraviolet-visible spectroscopy, transmission electron microscopy and X-ray diffraction. Physical characterisation revealed that the gum synthesised Pd NPs were in the size range of 6.5 ± 2.3 nm and crystallised in face centred cubic (FCC) symmetry. Fourier transform infrared spectroscopy implicated the role of carboxyl, amine and hydroxyl groups in the synthesis. The synthesised Pd NPs were found to be highly stable in nature. The synthesised nanoparticles were found to function as an effective green catalyst (k = 0.182 min⁻¹) in the reduction of 4-nitrophenol by sodium borohydride, which was evident from the colour change of bright yellow (nitrophenolate; λ(max) - 400 nm) to colourless (4-AP; λ(max) - 294 nm) solution. The overall objectives of the current communication were: (i) to synthesize the Pd NPs using a green reducing/capping agent; GK and (ii) to determine the catalytic performance of the synthesised Pd NPs.

  11. Erosive effects of acidic center-filled chewing gum on primary and permanent enamel

    Directory of Open Access Journals (Sweden)

    Bolan M

    2008-01-01

    Full Text Available Background: The higher incidence of dental erosion in children and teenagers possibly reflects a high intake of acidic food and beverages as well as a more frequent diagnosis on this condition. Aim: The aim of this study was to evaluate the erosive potential of acidic filling of chewing gum in primary and permanent enamel. Methods and Materials: Eighty enamel blocks (40 primary and 40 permanent teeth were used and randomly distributed into eight groups. Groups were divided according to types of dental substrates (permanent or primary, frequency of exposure to the acidic substance (2X or 4X/day, and concentration (pure or diluted. Exposure time to the acidic content of the chewing gum was five minutes under agitation, during five days. Results: All groups showed a significant decrease in surface microhardness (P < 0.001. There was neither any significant difference in the frequency of exposure to the acidic content nor to the types of dental substrates. There was a statistically significant difference between D1 (pure, 2X/day and D2 (diluted, 2X/day (P = 0.002, D3 (pure, 4X/day and D4 (diluted, 4X/day (P = 0.009 regarding the concentration, then the diluted acid content was associated with a greater decrease in microhardness. Conclusion: It is concluded that the acidic filling of a chewing gum reduced the microhardness of primary and permanent enamel.

  12. Evaluation on Bending Properties of Biomaterial GUM Metal Meshed Plates for Bone Graft Applications

    Science.gov (United States)

    Suzuki, Hiromichi; He, Jianmei

    2017-11-01

    There are three bone graft methods for bone defects caused by diseases such as cancer and accident injuries: Autogenous bone grafts, Allografts and Artificial bone grafts. In this study, meshed GUM Metal plates with lower elasticity, high strength and high biocompatibility are introduced to solve the over stiffness & weight problems of ready-used metal implants. Basic mesh shapes are designed and applied to GUM Metal plates using 3D CAD modeling tools. Bending properties of prototype meshed GUM Metal plates are evaluated experimentally and analytically. Meshed plate specimens with 180°, 120° and 60° axis-symmetrical types were fabricated for 3-point bending tests. The pseudo bending elastic moduli of meshed plate specimens obtained from 3-point bending test are ranged from 4.22 GPa to 16.07 GPa, within the elasticity range of natural cortical bones from 2.0 GPa to 30.0 GPa. Analytical approach method is validated by comparison with experimental and analytical results for evaluation on bending property of meshed plates.

  13. Comparative study of gum arabic and PVP as stabilizing agents for synthesis of gold nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Andressa A.; Leal, Jessica; Geraldes, Adriana N.; Lugao, Ademar B., E-mail: andressa_alvess@yahoo.com.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    Use Colloidal metallic nanoparticles such as gold nanoparticles have received a great attention, due in part to their specific properties and potential applications. Control of size and uniformity of nanoparticles is important to prevent aggregation. High-molecular-weight polymers were used as stabilizer agents. Natural polymers, such as gum Arabic, are used as stabilizer because of capping nanoparticles behavior and present advantages such as solubility, non- toxicity and its compatibility for pharmaceutical and biomedical applications. Previous studies showed that the hydrophilic group of Poly(vinyl pyrrolidone) (PVP) caused repulsion on gold nanoparticles surface because steric interactions with polymer, for this reason this kind of polymers could be used as stabilizer agent. The aim of this work is to study the synthesis and stabilization of gold nanoparticles with PVP and gum Arabic using gamma radiation. The results obtained by samples analysis using UV-Visible showed that the gamma irradiation doses influenced the nanoparticles formation by PVP but that is not the case with the GA, because for smaller quantity of Arabic gum in different doses produced and stabilized nanoparticles. The samples were observed for 20 days and showed stability. We have obtained preliminary results showed that the use of radiation is applicable to the formation of gold nanoparticles. (author)

  14. Fabrication of Porous α-TCP/Gellan Gum Scaffold for Bone Tissue Engineering.

    Science.gov (United States)

    Wen, Jian; Kim, Ill Yong; Kikuta, Koichi; Ohtsuki, Chikara

    2016-03-01

    α-tricalcium phosphate (α-TCP, α-Ca3(PO4)2) receives great attention for bone repairing due to its biodegradability and capability of transformation to human bone's main inorganic components, hydroxyapatite (HAp). α-TCP porous scaffold is easily procurable by sintering of the low-temperature polymorph of TCP, β-TCR Still, porous body of α-TCP is too brittle to being handled and shaped, limiting its clinical application as implant materials. To improve mechanical properties of α-TCP porous scaffold, the present study focused on coating of a type of polysaccharides on α-TCP scaffolds. Gellan gum was chosen as the polysaccharide for coating because of its biodegradability as well as the potential acting as substrate for HAp deposition during hydration of α-TCP after exposure to body fluid. After coating of gellan gum on α-TCP scaffolds with porosity of 75 vol%, the compressive strength increased from 0.45 MPa to around 2.00 MPa. Among the coated scaffold, the maximum compressive strength, 3.97 MPa, was obtained on the scaffold with porosity of 63 vol%. Improvement of mechanical properties of α-TCP/gellan gum composites was achieved to show easy handling performance for a bone substitute for tissue repairing. The dissolving rate of the coated scaffolds was also controlled by adjusting the concentration of GG solutions.

  15. Influence of twin-screw extrusion on soluble arabinoxylans and corn fiber gum from corn fiber.

    Science.gov (United States)

    Singkhornart, Sasathorn; Lee, Seul Gi; Ryu, Gi Hyung

    2013-09-01

    The effect of feed moisture content and screw speed in the extrusion process with and without chemical pretreatment of corn fiber was investigated. Different chemical pretreatment methods (NaOH and H2 SO4 solution) were compared. The improvement of reducing sugar, soluble arabinoxylans (SAX) content and the yield of corn fiber gum was measured. A high reducing sugar content was obtained in the filtrate fraction from the extruded destarched corn fiber (EDCF) with H₂SO₄ pretreatment. Feed moisture content most effectively improved both reducing sugar and SAX content of filtrate. Increasing feed moisture content and screw speed resulted in a higher SAX content in the filtrate of the EDCF with NaOH pretreatment. The SAX content of the residual solid from the EDCF with NaOH pretreatment was higher compared to H₂SO₄ pretreated and unpretreated samples and significantly increased with decreasing feed moisture content. The screw speed did not have a major impact after enzyme hydrolysis. The yield of corn fiber gum was increased by 12% using NaOH pretreatment combined with extrusion process as compared to the destarched corn fiber. The results show the great potential of the extrusion process as an effective pretreatment for disruption the lignocelluloses of corn fiber, leading to conversion of cellulose to glucose and hemicelluloses to SAX and isolation of corn fiber gum. © 2013 Society of Chemical Industry.

  16. Knowledge about prevention of oral cancer and gum disease among school teachers in Dharwad, India

    Directory of Open Access Journals (Sweden)

    Shodan Mangalore

    2013-01-01

    Full Text Available Objective: To assess the knowledge of primary school teachers in Dharwad, India, regarding the prevention of oral cancer and gum disease. Materials and Methods : In this cross sectional study a self administered questionnaire was used for data collection. A total of 184 school teachers were selected for the study. A response rate of 96.7% (n = 178 was obtained. Results : Of the respondents, 36.5% (n = 65 had poor knowledge, while 27.5% had good knowledge regarding the prevention of oral cancer and gum disease. School teachers with postgraduate qualification were better informed with regard to the prevention of oral diseases as compared to those with only a bachelor degree. Factors such as education, sex, and type of institutional funding (public/private were significantly correlated with the level of knowledge (R2 = 0.1128; P < 0.05. Conclusion : School teachers need to be motivated to improve their awareness and knowledge about the prevention of oral cancer and gum diseases, particularly the younger teachers and those with only bachelor degrees. Establishment of school-based oral-health promotion programs in India is urgently required.

  17. Effect of sugars and salts on rheological properties of Balangu seed (Lallemantia royleana) gum.

    Science.gov (United States)

    Salehi, Fakhreddin; Kashaninejad, Mahdi; Behshad, Vahid

    2014-06-01

    The effect of different sugars (sucrose, glucose, fructose, and lactose) and salts (NaCl and CaCl2) at various concentrations on rheological properties of Balangu seed gum (BSG, 1% w/w) was investigated. The apparent viscosity was influenced by the sugars and salts concentration and shear rate. Synergistic interaction between BSG gum and sugars improved the viscosity of solutions, whereas addition of salts decreased viscosity of gum solutions. The Power law and Herschel-Bulkley models were fitted to shear stress-shear rate data to obtain the consistency coefficient (K) and flow behavior index (n) for BSG solutions. Power law model well described non-Newtonian pseudoplastic behavior of BSG. Both K and n were sensitive to sugars and salts concentration. Highest values (0.45-0.49) of flow behavior index were observed for glucose at all concentrations. Addition of sucrose, fructose, lactose and salts to BSG led to more pseudoplastic solutions, whereas glucose decreased pseudoplasticity of solutions. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Optimization of Variables for Aqueous Extraction of Gum from Grewia mollis Powder

    Directory of Open Access Journals (Sweden)

    Emmanuel Panyoo Akdowa

    2014-01-01

    Full Text Available Grewia gum is a polysaccharide derived from the inner stem bark of the edible plant Grewia mollis. Juss (family Tiliaceae. It is a savanna shrub that grows wildly but is usually cultivated in Nigeria and Northern part of Cameroon. The main goal of the present study was to investigate the effect of aqueous extraction conditions on the extraction yield and physicochemical properties of the Grewia mollis. The studied aqueous extraction variables were water/powder (W/P ratio (10 : 1–80 : 1 w/p, temperature (25.0–85.0∘C, time (1–3 h, and pH (4.0–10.0. The results indicated that the aqueous extraction variables exhibited the least significant (P<0.05 effect on the yield and the viscosity of the gum. The result shows that the ratio of extraction is the main factor affecting the extraction of gum. The optimized extraction condition for higher viscosity was at the powder/water ratio of 1 : 55.4, pH of 7, time of 1 h, and temperature of 50∘C. However, the optimized extraction condition for higher yield was at the powder/water ratio of 1 : 80, pH of 4, time of 3 h, and temperature of 73∘C.

  19. Carboxymethyl guar gum nanoparticles for drug delivery applications: Preparation and preliminary in-vitro investigations

    Energy Technology Data Exchange (ETDEWEB)

    Dodi, G., E-mail: gianina.dodi@yahoo.co.uk [“Gheorghe Asachi” Technical University of Iasi (Romania); SCIENT — Research Centre for Instrumental Analysis, Bucharest (Romania); Pala, A. [University of Sassari, Sassari (Italy); Barbu, E. [University of Portsmouth, Portsmouth (United Kingdom); Peptanariu, D. [“Petru Poni” Institute of Macromolecular Chemistry, Iasi (Romania); Hritcu, D.; Popa, M.I. [“Gheorghe Asachi” Technical University of Iasi (Romania); Tamba, B.I. [“Gr. T. Popa” University of Medicine and Pharmacy, Iasi (Romania)

    2016-06-01

    Carboxymethyl guar gum (CMGG) synthesized from commercially available polysaccharide was formulated into nanoparticles via ionic gelation using trisodium trimetaphosphate (STMP) as cross-linking agent. Characterisation using a range of analytical techniques (FTIR, NMR, GPC, TGA and DLS) confirmed the CMGG structure and revealed the effect of the CMGG and STMP concentration on the main characteristics of the obtained nanoformulations. The average nanoparticle diameter was found to be around 208 nm, as determined by dynamic light scattering (DLS) and confirmed by scanning electron microscopy (SEM) and nanoparticle tracking analysis (NTA). Experiments using simulated gastric and intestinal fluids evidenced significant pH-dependent drug release behaviour of the nanoformulations loaded with Rhodamine B (RhB) as a model drug (loading capacity in excess of 83%), as monitored by UV–Vis. While dose-dependent cytotoxicity was observed, the nanoformulations appeared completely non-toxic at concentrations below 0.3 mg/mL. Results obtained so far suggest that carboxymethylated guar gum nanoparticles formulated with STMP warrant further investigations as polysaccharide based biocompatible drug nanocarriers. - Highlights: • Carboxymethyl guar gum nanoparticles preparation by ionic gelation • The optimum synthesis system designed particles around 200 nm • The nanoformulations appeared completely non-toxic at specific concentrations • The loaded formulations evidenced significant pH-dependent drug release behaviour • The results encourage further investigations as polysaccharidic drug nanocarriers.

  20. A study on the design, formulation and effectiveness of chewing gums containing Chlorhexidine Gluconate in the prevention of dental plaque

    Directory of Open Access Journals (Sweden)

    Kolahi Kazerani G

    2003-08-01

    Full Text Available Statement of Problem: The role of the microbial plaque in caries etiology and periodontal diseases has been"nproved and the mechanical methods for plaque control have special limitations, consequently, chemical"nmethods have been suggested. One of the most effective materials is Chlorhexidine Gluconate that is"ncommonly used as mouth rinses. However, the medicated formulations of chewing gums, due to several"nproperties, have been paid attention. It should be noted that a new formulation to satisfy the consumers' taste"nseems necessary."nPurpose: The aim of this study was to present a new formulation for chewing gums containing chlorhexidine"nto achieve a pleasant taste coupled with their effectiveness and anti-plaque properties maintenance."nMaterials and Methods: In this double blind, crossover, prospective clinical trial, 18 volunteers were"ninvestigated. Chlorhexidine Gluconate was used and added to the gum-base by Manitole. In order to cover the"nbitter taste of the drug Aspartam, mint essence and Mentole were used. After gums production, the profile of"ndrug dissolution was evaluated by jaw movement simulating system. It took 5 days to study each type of"nchewing gums without any mechanical plaque control method. Medicated and placebo chewing gums were"nidentical in shape, size, color and formulation. The washout period was 2 days. Chewing gums were used"nevery 12 hours for 20 minutes. To determine plaque score, Turesky- Gilmore- Glickman modification index"nwas used. Other variables including: subjective evaluation of taste, cleansing effect and taste disturbance were"nassessed through filling a checklist. The data were analyzed by Paired t test and Wilcoxon test."nResults: During 20 mins, 80% of the drug was released from the gum-base. The mean difference of plaque"nscore between the initial and final stages at the first trial was -0.1589 and at the second trial was 2.994 which"nwas statistically significant (P<0.001. Subjective

  1. Transitional–turbulent spots and turbulent–turbulent spots in boundary layers

    Science.gov (United States)

    Wu, Xiaohua; Moin, Parviz; Wallace, James M.; Skarda, Jinhie; Lozano-Durán, Adrián; Hickey, Jean-Pierre

    2017-01-01

    Two observations drawn from a thoroughly validated direct numerical simulation of the canonical spatially developing, zero-pressure gradient, smooth, flat-plate boundary layer are presented here. The first is that, for bypass transition in the narrow sense defined herein, we found that the transitional–turbulent spot inception mechanism is analogous to the secondary instability of boundary-layer natural transition, namely a spanwise vortex filament becomes a Λ vortex and then, a hairpin packet. Long streak meandering does occur but usually when a streak is infected by a nearby existing transitional–turbulent spot. Streak waviness and breakdown are, therefore, not the mechanisms for the inception of transitional–turbulent spots found here. Rather, they only facilitate the growth and spreading of existing transitional–turbulent spots. The second observation is the discovery, in the inner layer of the developed turbulent boundary layer, of what we call turbulent–turbulent spots. These turbulent–turbulent spots are dense concentrations of small-scale vortices with high swirling strength originating from hairpin packets. Although structurally quite similar to the transitional–turbulent spots, these turbulent–turbulent spots are generated locally in the fully turbulent environment, and they are persistent with a systematic variation of detection threshold level. They exert indentation, segmentation, and termination on the viscous sublayer streaks, and they coincide with local concentrations of high levels of Reynolds shear stress, enstrophy, and temperature fluctuations. The sublayer streaks seem to be passive and are often simply the rims of the indentation pockets arising from the turbulent–turbulent spots. PMID:28630304

  2. Transitional-turbulent spots and turbulent-turbulent spots in boundary layers.

    Science.gov (United States)

    Wu, Xiaohua; Moin, Parviz; Wallace, James M; Skarda, Jinhie; Lozano-Durán, Adrián; Hickey, Jean-Pierre

    2017-07-03

    Two observations drawn from a thoroughly validated direct numerical simulation of the canonical spatially developing, zero-pressure gradient, smooth, flat-plate boundary layer are presented here. The first is that, for bypass transition in the narrow sense defined herein, we found that the transitional-turbulent spot inception mechanism is analogous to the secondary instability of boundary-layer natural transition, namely a spanwise vortex filament becomes a [Formula: see text] vortex and then, a hairpin packet. Long streak meandering does occur but usually when a streak is infected by a nearby existing transitional-turbulent spot. Streak waviness and breakdown are, therefore, not the mechanisms for the inception of transitional-turbulent spots found here. Rather, they only facilitate the growth and spreading of existing transitional-turbulent spots. The second observation is the discovery, in the inner layer of the developed turbulent boundary layer, of what we call turbulent-turbulent spots. These turbulent-turbulent spots are dense concentrations of small-scale vortices with high swirling strength originating from hairpin packets. Although structurally quite similar to the transitional-turbulent spots, these turbulent-turbulent spots are generated locally in the fully turbulent environment, and they are persistent with a systematic variation of detection threshold level. They exert indentation, segmentation, and termination on the viscous sublayer streaks, and they coincide with local concentrations of high levels of Reynolds shear stress, enstrophy, and temperature fluctuations. The sublayer streaks seem to be passive and are often simply the rims of the indentation pockets arising from the turbulent-turbulent spots.

  3. Transitional-turbulent spots and turbulent-turbulent spots in boundary layers

    Science.gov (United States)

    Wu, Xiaohua; Moin, Parviz; Wallace, James M.; Skarda, Jinhie; Lozano-Durán, Adrián; Hickey, Jean-Pierre

    2017-07-01

    Two observations drawn from a thoroughly validated direct numerical simulation of the canonical spatially developing, zero-pressure gradient, smooth, flat-plate boundary layer are presented here. The first is that, for bypass transition in the narrow sense defined herein, we found that the transitional-turbulent spot inception mechanism is analogous to the secondary instability of boundary-layer natural transition, namely a spanwise vortex filament becomes a ΛΛ vortex and then, a hairpin packet. Long streak meandering does occur but usually when a streak is infected by a nearby existing transitional-turbulent spot. Streak waviness and breakdown are, therefore, not the mechanisms for the inception of transitional-turbulent spots found here. Rather, they only facilitate the growth and spreading of existing transitional-turbulent spots. The second observation is the discovery, in the inner layer of the developed turbulent boundary layer, of what we call turbulent-turbulent spots. These turbulent-turbulent spots are dense concentrations of small-scale vortices with high swirling strength originating from hairpin packets. Although structurally quite similar to the transitional-turbulent spots, these turbulent-turbulent spots are generated locally in the fully turbulent environment, and they are persistent with a systematic variation of detection threshold level. They exert indentation, segmentation, and termination on the viscous sublayer streaks, and they coincide with local concentrations of high levels of Reynolds shear stress, enstrophy, and temperature fluctuations. The sublayer streaks seem to be passive and are often simply the rims of the indentation pockets arising from the turbulent-turbulent spots.

  4. Triggered tremor sweet spots in Alaska

    Science.gov (United States)

    Gomberg, Joan; Prejean, Stephanie

    2013-01-01

    To better understand what controls fault slip along plate boundaries, we have exploited the abundance of seismic and geodetic data available from the richly varied tectonic environments composing Alaska. A search for tremor triggered by 11 large earthquakes throughout all of seismically monitored Alaska reveals two tremor “sweet spots”—regions where large-amplitude seismic waves repeatedly triggered tremor between 2006 and 2012. The two sweet spots locate in very different tectonic environments—one just trenchward and between the Aleutian islands of Unalaska and Akutan and the other in central mainland Alaska. The Unalaska/Akutan spot corroborates previous evidence that the region is ripe for tremor, perhaps because it is located where plate-interface frictional properties transition between stick-slip and stably sliding in both the dip direction and laterally. The mainland sweet spot coincides with a region of complex and uncertain plate interactions, and where no slow slip events or major crustal faults have been noted previously. Analyses showed that larger triggering wave amplitudes, and perhaps lower frequencies (sweet spots also does not occur during slow slip events visually detectable in GPS data, although slow slip below the detection threshold may have facilitated tremor triggering.

  5. Hot-spot tectonics on Io

    Science.gov (United States)

    Mcewen, A. S.

    1985-01-01

    The thesis is that extensional tectonics and low-angle detachment faults probably occur on Io in association with the hot spots. These processes may occur on a much shorter timescale on Ion than on Earth, so that Io could be a natural laboratory for the study of thermotectonics. Furthermore, studies of heat and detachment in crustal extension on Earth and the other terresrial planets (especially Venus and Mars) may provide analogs to processes on Io. The geology of Io is dominated by volcanism and hot spots, most likely the result of tidal heating. Hot spots cover 1 to 2% of Io's surface, radiating at temperatures typically from 200 to 400 K, and occasionally up to 700K. Heat loss from the largest hot spots on Io, such as Loki Patera, is about 300 times the heat loss from Yellowstone, so a tremendous quantity of energy is available for volcanic and tectonic work. Active volcanism on Io results in a resurfacing rate as high as 10 cm per year, yet many structural features are apparent on the surface. Therefore, the tectonics must be highly active.

  6. Dramatic Change in Jupiter's Great Red Spot

    Science.gov (United States)

    Simon, A. A.; Wong, M. H.; Rogers, J. H.; Orton, G. S.; de Pater, I.; Asay-Davis, X.; Carlson, R. W.; Marcus, P. S.

    2015-01-01

    Jupiter's Great Red Spot (GRS) is one of its most distinct and enduring features, having been continuously observed since the 1800's. It currently spans the smallest latitude and longitude size ever recorded. Here we show analyses of 2014 Hubble spectral imaging data to study the color, structure and internal dynamics of this long-live storm.

  7. The effect of CPP-ACP-propolis chewing gum on calcium and phosphate ion release on caries-active subjects’ saliva and the formation of Streptococcus mutans biofilm

    Science.gov (United States)

    Hasnamudhia, F.; Bachtiar, E. W.; Sahlan, M.; Soekanto, S. A.

    2017-08-01

    The aim of this study was to analyze the effect of CPP-APP and propolis wax if they are combined in a chewing gum formulation, observed from the calcium and phosphate ion level released by CPP-ACP and the emphasis of Streptococcus mutans mass in the biofilm by propolis wax on caries-active subjects’ saliva. Chewing gum simulation was done in vitro on 25 caries-active subjects’ saliva using five concentrations of chewing gum (0% propolis + 0% CPP-ACP, 0% propolis + CPP-ACP, 2% propolis + CPP-ACP, 4% propolis + CPP-ACP, and 6% propolis + CPP-ACP) and was then tested using an atomic absorption spectrophotometer to analyze calcium ion levels, an ultraviolet-visible spectrophotometer to analyze phosphate ion levels, and a biofilm assay using crystal violet to analyze the decline in biofilm mass. After the chewing simulation, calcium ion levels on saliva+gum eluent increased significantly compared to the saliva control, with the highest calcium level released by CPP-ACP + 2% propolis chewing gum. There was an insignificant phosphate level change between the saliva control and saliva+gum eluent. There was also a significant decline of S. mutans biofilm mass in the saliva+gum eluent, mostly by the CPP-ACP chewing gum and CPP-ACP + 6% propolis. The CPP-ACP-propolis chewing gum simulation generated the largest increase in calcium and phosphate ion level and the largest decline in S. mutans biofilm mass.

  8. Optimization of the new formulation of ice cream with native Iranian seed gums (Lepidium perfoliatum and Lepidium sativum) using response surface methodology (RSM).

    Science.gov (United States)

    Azari-Anpar, M; Soltani Tehrani, N; Aghajani, N; Khomeiri, M

    2017-01-01

    In this study, effect of Qodume shahri ( Lepidium perfoliatum ) and cress ( Lepidium sativum ) on rheological properties of ice cream were investigated. The gums were added to the ice cream formulation and different quality attributes including pH, acidity, melting characteristics, viscosity, overrun, texture analysis and sensory evaluation were determined. Results showed that ice cream formulations containing both the gums had improved overrun, melting rate, first dripping time, viscosity, hardness and adhesiveness. The gum concentrations beyond 0.2% level led to a negative effect on gumminess and chewiness of ice cream. Both the gums addition to improved quality attributes and textural properties of ice cream.

  9. Hyperspectral analysis of columbia spotted frog habitat

    Science.gov (United States)

    Shive, J.P.; Pilliod, D.S.; Peterson, C.R.

    2010-01-01

    Wildlife managers increasingly are using remotely sensed imagery to improve habitat delineations and sampling strategies. Advances in remote sensing technology, such as hyperspectral imagery, provide more information than previously was available with multispectral sensors. We evaluated accuracy of high-resolution hyperspectral image classifications to identify wetlands and wetland habitat features important for Columbia spotted frogs (Rana luteiventris) and compared the results to multispectral image classification and United States Geological Survey topographic maps. The study area spanned 3 lake basins in the Salmon River Mountains, Idaho, USA. Hyperspectral data were collected with an airborne sensor on 30 June 2002 and on 8 July 2006. A 12-year comprehensive ground survey of the study area for Columbia spotted frog reproduction served as validation for image classifications. Hyperspectral image classification accuracy of wetlands was high, with a producer's accuracy of 96 (44 wetlands) correctly classified with the 2002 data and 89 (41 wetlands) correctly classified with the 2006 data. We applied habitat-based rules to delineate breeding habitat from other wetlands, and successfully predicted 74 (14 wetlands) of known breeding wetlands for the Columbia spotted frog. Emergent sedge microhabitat classification showed promise for directly predicting Columbia spotted frog egg mass locations within a wetland by correctly identifying 72 (23 of 32) of known locations. Our study indicates hyperspectral imagery can be an effective tool for mapping spotted frog breeding habitat in the selected mountain basins. We conclude that this technique has potential for improving site selection for inventory and monitoring programs conducted across similar wetland habitat and can be a useful tool for delineating wildlife habitats. ?? 2010 The Wildlife Society.

  10. Effects of guar gum and cellulose on glucose absorption, hormonal release and hepatic metabolism in the pig

    Science.gov (United States)

    Nunes, C. S.; Malmlof, K.

    1992-01-01

    Six Large White pigs (mean body-weight 59 (SE 1.7) kg) were surgically fitted with permanent catheters in the portal vein, the brachiocephalic artery and the right hepatic vein, as well as with electromagnetic flow probes around the portal vein and the hepatic artery, and allowed to recover. The non-anaesthetized animals were given a basal non-fibre diet (diet A) alone or together with 60 g guar gum/kg (diet B) or 150 g purified cellulose/kg (diet C) by substitution for mica. The diets were given for weekly periods and according to a replicated 3 x 3 Latin square design. On the last day of each such adaptation period, test meals of 800 g were given before blood sampling. Sampling was continued for 8 h. Guar gum strongly reduced glucose apparent absorption without changing the absorption and the hepatic uptake profiles. Production rates of insulin, gastric inhibitory polypeptide and insulin-like growth factor-1 (IGF-1) were lowest after guar gum ingestion. However, the reductions in peripheral blood insulin levels caused by guar gum were not associated with a change in hepatic insulin extraction. IGF-1 appeared to be strongly secreted by the gut, whereas the liver had a net uptake of the peptide. Ingestion of guar gum increased the hepatic extraction coefficient of gut-produced IGF-1. Guar gum ingestion appeared also to decrease glucagon secretion. Cellulose at the level consumed had very few effects on the variables considered. It is suggested that the modulation of intestinal mechanisms by guar gum was sufficient to mediate the metabolic effects described.

  11. Crossover clinical investigation of a whitening chewing gum for inhibiting dental stain formation in conjunction with tooth brushing.

    Science.gov (United States)

    Milleman, Jeffery L; Milleman, Kimberly R; Kleber, Carl J; Proskin, Howard M; Dodds, Michael; Kelley, Michael; Ramirez, Lilian

    2014-01-01

    The purpose of this clinical investigation was to evaluate the effectiveness of a marketed whitening chewing gum compared to a no-gum control in preventing the formation of extrinsic stains on the teeth of stain-forming subjects when chewed over a 12-week period of regular unsupervised use in conjunction with daily tooth brushing. This was a single-center, examiner-blind, randomized, 12-week crossover clinical trial. Stain-forming (after smoking or drinking coffee or tea) adults, starting with a stain-free baseline, either chewed the test gum (Orbit White) unsupervised four times per day, 15 minutes/chew, or used no gum along with daily brushing with a commercially available toothbrush and dentifrice for 12 weeks. At the crossover, all procedures were repeated with subjects assigned the opposite treatment. Extrinsic stain was measured at six and 12 weeks by both the Lobene Stain Index (LSI) and the Modified Lobene Stain Index (MLSI) using separate experienced examiners. After 12 weeks, LSI stain scores showed a significant 25% reduction (p = 0.0008) in new stain formation for subjects using the test chewing gum along with tooth brushing versus tooth brushing alone (no-gum control). The corresponding MLSI stain scores demonstrated a 36% reduction (p stain on the teeth. The overall findings of this clinical study demonstrated that regular use of Orbit White chewing gum, soon after smoking or drinking coffee or tea, will supplement daily tooth brushing in preventing unsightly stains from forming on the anterior teeth compared to brushing alone.

  12. The Effect of Chewing Sugar Free Gum after Elective Cesarean-Delivery on Return of Bowel Function in Primiparous Women:

    Directory of Open Access Journals (Sweden)

    Gangi F

    2011-01-01

    Full Text Available Background and Objectives: An important cause of delayed recovery from abdominal surgery is delay in return of bowel Function. The aim of the present study was to assess the effects of chewing sugar free gum after elective Cesarean-delivery on return of bowel function in primiparous women in Hajar hospital of Shahrekord.Methods: In a randomized clinical trial, 120 patients, who were scheduled for elective cesarean were randomly allocated to 2 groups of gum-chewing group (n=60 and control group (n=60 postoperatively. The patients in the gum-chewing group chewed postoperatively sugar free gum 4 times daily as soon as they recovered from anesthesia till the time they passed flatus or defecated. Control group recieved routine postoperative dietary management. The mean scores of postoperative time interval to first hearing of normal bowel sounds, passage of flatus, defecation and sensation of bowel movement were compared between the two groups. The data were then analyzed using chi square and t-test (p<0.05.Results: The mean postoperative time interval to first hearing of normal intestinal sounds (6.5+/-1.5 versus 12.5+/- 2.5 hours, the first passage of flatus (12.2+/-2.0 vs.22.4+/-4.1 hours, first sensation of bowel movement (7.4+/-1.7 versus 15.7+/-3.4 hours and defecation (15.5+/-2.5 versus 23.4+/-4.8 hours were significantly lower in the gum-chewing group compared with control group. (p<0.001. The staying period in the hospital (0.96+/-0.18 versus 1.1+/-34 days was significantly shorter in gum-chewing group. (p<0.001.Conclusion: Chewing gum after elective Cesarean-Delivery is safe, inexpensive and helpful which is well tolerated, and associated with rapid resumption of intestinal function and speeds recovery shorter hospital stay.

  13. The Effect of Chewing Sugar Free Gum after Elective Cesarean-Delivery on Return of Bowel Function in Primiparous Women:

    Directory of Open Access Journals (Sweden)

    Safdari Dehcheshmeh F

    Full Text Available Background and Objectives: An important cause of delayed recovery from abdominal surgery is delay in return of bowel Function. The aim of the present study was to assess the effects of chewing sugar free gum after elective Cesarean-delivery on return of bowel function in primiparous women in Hajar hospital of Shahrekord.Methods: In a randomized clinical trial, 120 patients, who were scheduled for elective cesarean were randomly allocated to 2 groups of gum-chewing group (n=60 and control group (n=60 postoperatively. The patients in the gum-chewing group chewed postoperatively sugar free gum 4 times daily as soon as they recovered from anesthesia till the time they passed flatus or defecated. Control group recieved routine postoperative dietary management. The mean scores of postoperative time interval to first hearing of normal bowel sounds, passage of flatus, defecation and sensation of bowel movement were compared between the two groups. The data were then analyzed using chi square and t-test (p<0.05.Results: The mean postoperative time interval to first hearing of normal intestinal sounds (6.5+/-1.5 versus 12.5+/- 2.5 hours, the first passage of flatus (12.2+/-2.0 vs.22.4+/-4.1 hours, first sensation of bowel movement (7.4+/-1.7 versus 15.7+/-3.4 hours and defecation (15.5+/-2.5 versus 23.4+/-4.8 hours were significantly lower in the gum-chewing group compared with control group. (p<0.001. The staying period in the hospital (0.96+/-0.18 versus 1.1+/-34 days was significantly shorter in gum-chewing group. (p<0.001.Conclusion: Chewing gum after elective Cesarean-Delivery is safe, inexpensive and helpful which is well tolerated, and associated with rapid resumption of intestinal function and speeds recovery shorter hospital stay.

  14. Real-time investigation of mannosyltransferase function of a Xylella fastidiosa recombinant GumH protein using QCM-D.

    Science.gov (United States)

    Alves, Claudia A; Pedroso, Mariele M; de Moraes, Marcela C; Souza, Dulce H F; Cass, Quezia B; Faria, Ronaldo C

    2011-05-20

    Xylella fastidiosa is a gram-negative bacterium that causes serious diseases in economically important crops, including grapevine, coffee, and citrus fruits. X. fastidiosa colonizes the xylem vessels of the infected plants, thereby blocking water and nutrient transport. The genome sequence of X. fastidiosa has revealed an operon containing nine genes possibly involved in the synthesis of an exopolisaccharide (EPS) named fastidian gum that can be related with the pathogenicity of this bacterium. The α-1,3-mannosyltransferase (GumH) enzyme from X. fastidiosa is involved in fastidian gum production. GumH is responsible for the transfer of mannose from guanosine diphosphate mannose (GDP-man) to the cellobiose-pyrophosphate-polyprenol carrier lipid (CPP-Lip) during the assembly and biosynthesis of EPS. In this work, a method for real-time detection of recombinant GumH enzymatic activity was successfully developed using a Quartz Crystal Microbalance with dissipation monitoring (QCM-D). The QCM-D transducer was strategically modified with CPP-Lip by using a solid-supported lipid bilayer that makes use of a self-assembled monolayer of 1-undecanethiol. Monitoring the real-time CPP-Lip QCM-D transducer in the presence of GDP-man and GumH enzyme shows a mass increase, indicating the transfer of mannose. The real-time QCM-D determination of mannosyltransferase function was validated by a High Performance Liquid Chromatography (LC) method developed for determination of GDP produced by enzymatic reaction. LC results confirmed the activity of recombinant GumH protein, which is the first enzyme involved in the biosynthesis of the EPS from X. fastidiosa enzymatically characterized. Copyright © 2011 Elsevier Inc. All rights reserved.

  15. Highly viscous guar gum shifts dietary amino acids from metabolic use to fermentation substrate in domestic cats.

    Science.gov (United States)

    Rochus, Kristel; Janssens, Geert P J; Van de Velde, Hannelore; Verbrugghe, Adronie; Wuyts, Birgitte; Vanhaecke, Lynn; Hesta, Myriam

    2013-03-28

    The present study evaluated the potential of affecting amino acid metabolism through intestinal fermentation in domestic cats, using dietary guar gum as a model. Apparent protein digestibility, plasma fermentation metabolites, faecal fermentation end products and fermentation kinetics (exhaled breath hydrogen concentrations) were evaluated. Ten cats were randomly assigned to either guar gum- or cellulose-supplemented diets, that were fed in two periods of 5 weeks in a crossover design. No treatment effect was seen on fermentation kinetics. The apparent protein digestibility (P= 0.07) tended to be lower in guar gum-supplemented cats. As a consequence of impaired small-intestinal protein digestion and amino acid absorption, fermentation of these molecules in the large intestine was stimulated. Amino acid fermentation has been shown to produce high concentrations of acetic and butyric acids. Therefore, no treatment effect on faecal propionic acid or plasma propionylcarnitine was observed in the present study. The ratio of faecal butyric acid:total SCFA tended to be higher in guar gum-supplemented cats (P= 0.05). The majority of large-intestinal butyric acid is absorbed by colonocytes and metabolised to 3-hydroxy-butyrylcoenzyme A, which is then absorbed into the bloodstream. This metabolite was analysed in plasma as 3-hydroxy-butyrylcarnitine, which was higher (P= 0.02) in guar gum-supplemented cats. In all probability, the high viscosity of the guar gum supplement was responsible for the impaired protein digestion and amino acid absorption. Further research is warranted to investigate whether partially hydrolysed guar gum is useful to potentiate the desirable in vivo effects of this fibre supplement.

  16. Plasma spot welding of ferritic stainless steels

    Directory of Open Access Journals (Sweden)

    Lešnjak, A.

    2002-06-01

    Full Text Available Plasma spot welding of ferritic stainless steels is studied. The study was focused on welding parameters, plasma and shielding gases and the optimum welding equipment. Plasma-spot welded overlap joints on a 0.8 mm thick ferritic stainless steel sheet were subjected to a visual examination and mechanical testing in terms of tension-shear strength. Several macro specimens were prepared. Plasma spot welding is suitable to use the same gas as shielding gas and as plasma gas, i.e., a 98 % Ar/2 % H 2 gas mixture. Tension-shear strength of plasma-spot welded joints was compared to that of resistance-spot welded joints. It was found that the resistance welded joints withstand a somewhat stronger load than the plasma welded joints due to a larger weld spot diameter of the former. Strength of both types of welded joints is approximately the same.

    El artículo describe el proceso de soldeo de aceros inoxidables ferríticos por puntos con plasma. La investigación se centró en el establecimiento de los parámetros óptimos de la soldadura, la definición del gas de plasma y de protección más adecuado, así como del equipo óptimo para la realización de la soldadura. Las uniones de láminas de aceros inoxidables ferríticos de 0,8 mm de espesor, soldadas a solape por puntos con plasma, se inspeccionaron visualmente y se ensayaron mecánicamente mediante el ensayo de cizalladura por tracción. Se realizaron macro pulidos. Los resultados de la investigación demostraron que la solución más adecuada para el soldeo por puntos con plasma es elegir el mismo gas de plasma que de protección. Es decir, una mezcla de 98 % de argón y 2 % de hidrógeno. La resistencia a la cizalladura por tracción de las uniones soldadas por puntos con plasma fue comparada con la resistencia de las uniones soldadas por resistencia por puntos. Se llegó a la conclusión de que las uniones soldadas por resistencia soportan una carga algo mayor que la uniones

  17. Turbulent Region Near Jupiter's Great Red Spot

    Science.gov (United States)

    1997-01-01

    True and false color mosaics of the turbulent region west of Jupiter's Great Red Spot. The Great Red Spot is on the planetary limb on the right hand side of each mosaic. The region west (left) of the Great Red Spot is characterized by large, turbulent structures that rapidly change in appearance. The turbulence results from the collision of a westward jet that is deflected northward by the Great Red Spot into a higher latitude eastward jet. The large eddies nearest to the Great Red Spot are bright, suggesting that convection and cloud formation are active there.The top mosaic combines the violet (410 nanometers) and near infrared continuum (756 nanometers) filter images to create a mosaic similar to how Jupiter would appear to human eyes. Differences in coloration are due to the composition and abundance of trace chemicals in Jupiter's atmosphere. The lower mosaic uses the Galileo imaging camera's three near-infrared (invisible) wavelengths (756 nanometers, 727 nanometers, and 889 nanometers displayed in red, green, and blue) to show variations in cloud height and thickness. Light blue clouds are high and thin, reddish clouds are deep, and white clouds are high and thick. Purple most likely represents a high haze overlying a clear deep atmosphere. Galileo is the first spacecraft to distinguish cloud layers on Jupiter.The mosaic is centered at 16.5 degrees south planetocentric latitude and 85 degrees west longitude. The north-south dimension of the Great Red Spot is approximately 11,000 kilometers. The smallest resolved features are tens of kilometers in size. North is at the top of the picture. The images used were taken on June 26, 1997 at a range of 1.2 million kilometers (1.05 million miles) by the Solid State Imaging (SSI) system on NASA's Galileo spacecraft.The Jet Propulsion Laboratory, Pasadena, CA manages the Galileo mission for NASA's Office of Space Science, Washington, DC. JPL is an operating division of California Institute of Technology (Caltech

  18. SPOT: How good for geology? A comparison with LANDSAT MSS

    Science.gov (United States)

    Sesoeren, A.

    1986-12-01

    Geological interpretation possibilities of SPOT MSS and LANDSAT MSS positive prints enlarged to the same scale were compared, using as a test area part of the Jebel Amour (Algeria). The SPOT imagery offers many advantages, filling the gap between remote sensing from space and aerial photography. The best results by visual interpretation are obtained in combining SPOT for the required details with LANDSAT for the synoptic veiw. Further improvements are expected from the use of SPOT stereo-pairs.

  19. Spotted-Leaf Mutants of Rice (Oryza sativa

    Directory of Open Access Journals (Sweden)

    Qi-na HUANG

    2010-12-01

    Full Text Available Many rice spotted-leaf (spl mutants are ideal sources for understanding the mechanisms involved in blast resistance, bacterial blight resistance and programmed cell death in plants. The genetic controls of 50 spotted-leaf mutants in rice have been characterized and a few spotted-leaf genes have been isolated as well. This article reviews the origin, genetic modes, isolation and characterization of spotted-leaf genes responsible for their phenotypes, and their resistance responses to main rice diseases.

  20. Chemical composition and functional properties of gum exudates from the trunk of the almond tree (Prunus dulcis).

    Science.gov (United States)

    Mahfoudhi, N; Chouaibi, M; Donsì, F; Ferrari, G; Hamdi, S

    2012-06-01

    The physicochemical components and functional properties of the gum exudates from the trunk of the almond tree (Prunus dulcis) have been investigated, along with the emulsification and foaming properties. The gum exudates are composed on dry weight basis by 2.45% of proteins, 0.85% of fats and 92.36% of carbohydrates. The latter consist of arabinose, xylitol, galactose and uronic acid (46.8 : 10.9 : 35.5 : 6.0 mass ratio) with traces of rhamnose, mannose and glucose. Moreover, gum exudates are rich in minerals, such as sodium, potassium, magnesium, calcium and iron. The emulsifying capacity was studied for a 20% w/w olive oil in water emulsion as a function of gum concentration (from 3% to 12% w/w in the aqueous phase) as well as pH levels (from 3.0 to 10.0). The most stable and homogeneous emulsion was prepared with an 8% w/w aqueous almond gum solution at a pH between 5.0 and 8.0. In particular, for the same formulation, the emulsion processed by high pressure homogenization (5 passes at 200 MPa) resulted to be extremely stable under accelerated ageing, exhibiting no significant change in droplet size distribution for 14 days at 55 °C. All the tested systems exhibited an extremely low foaming capacity.