WorldWideScience

Sample records for sports standardized tests

  1. Sports eyewear protective standards.

    Science.gov (United States)

    Dain, Stephen J

    2016-01-01

    Eye injuries sustained during sport comprise up to 20 per cent of all injuries to the eye serious enough for medical attention to be sought. The prevalence of eye injuries in sport is not easily assessed due to lack of authoritative participation rates, so most studies report total numbers in a time period. The evidence on the proportion of all ocular injuries that are from sport is reviewed. The relative frequencies in different sports are compared in a qualitative manner and the sports with greater numbers of ocular injuries are detailed. In common with occupational injuries to the eye, most sports eye injuries are considered preventable. The hierarchy of action for occupational risk is detailed and adapted to use in a sports scenario. All the available international, regional and national standards on sports eye protection are detailed and their provisions compared. The major function of the standards is to provide adequate protection against the hazard of the sport concerned. These are detailed and compared as a function of energy transfer. Eye protection must not introduce additional or secondary hazards (for instance, fracturing into sharp fragments on impact) and not introduce features that would deter the wearing of eye protection (for instance, restricting field of view to impede playing the sport). The provisions of the standards intended to limit secondary hazards are detailed and compared. The need for future work in standards writing and the activities of the International Standardization Organization in sports eye protection are detailed. © 2016 Optometry Australia.

  2. 75 FR 70074 - Consensus Standards, Light-Sport Aircraft

    Science.gov (United States)

    2010-11-16

    ... Federal Aviation Administration Consensus Standards, Light-Sport Aircraft AGENCY: Federal Aviation... provisions of the Sport Pilot and Light-Sport Aircraft rule issued July 16, 2004, and effective September 1, 2004. ASTM International Committee F37 on Light Sport Aircraft developed the revised standards with...

  3. 77 FR 24251 - Consensus Standards, Light-Sport Aircraft

    Science.gov (United States)

    2012-04-23

    ... Light-Sport Aircraft rule, and revised Office of Management and Budget (OMB) Circular A-119, ``Federal... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Consensus Standards, Light-Sport... relating to the provisions of the Sport Pilot and Light-Sport Aircraft rule issued July 16, 2004, and...

  4. 76 FR 45647 - Consensus Standards, Light-Sport Aircraft

    Science.gov (United States)

    2011-07-29

    ... Federal Aviation Administration Consensus Standards, Light-Sport Aircraft AGENCY: Federal Aviation... to the provisions of the Sport Pilot and Light-Sport Aircraft rule issued July 16, 2004, and effective September 1, 2004. ASTM International Committee F37 on Light Sport Aircraft developed the revised...

  5. 78 FR 35085 - Consensus Standards, Light-Sport Aircraft

    Science.gov (United States)

    2013-06-11

    ... Federal Aviation Administration Consensus Standards, Light-Sport Aircraft AGENCY: Federal Aviation... availability of one new and seven revised consensus standards relating to the provisions of the Sport Pilot and Light-Sport Aircraft rule issued July 16, 2004, and effective September 1, 2004. ASTM International...

  6. Mitragynine (Kratom) - monitoring in sports drug testing.

    Science.gov (United States)

    Guddat, Sven; Görgens, Christian; Steinhart, Vanessa; Schänzer, Wilhelm; Thevis, Mario

    2016-11-01

    In 2014, mitragynine (Kratom) was placed on the Monitoring List of the World Anti-Doping Agency to gain information of its current use in professional sports. Therefore, analytical strategies in sports drug testing are presented and the first Kratom case in professional sports is described. It is outlined that thorough monitoring by anti-doping laboratories is of utmost importance to obtain data on Kratom's misuse and to protect athletes from potential health hazards. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  7. The primary care sports medicine fellowship: American Medical Society for Sports Medicine proposed standards of excellence.

    Science.gov (United States)

    Asif, Irfan M; Stovak, Mark; Ray, Tracy; Weiss-Kelly, Amanda

    2017-09-01

    The American Medical Society for Sports Medicine recognises a need to provide direction and continually enhance the quality of sports medicine fellowship training programmes. This document was developed to be an educational resource for sports medicine physicians who teach in a 1-year primary care sports medicine fellowship training programme. It is meant to provide high standards and targets for fellowship training programmes that choose to re-assess their curriculum and seek to make improvements. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  8. Joint Sport Classification of Ukraine and ranking standards in powerlifting

    Directory of Open Access Journals (Sweden)

    Stetsenko A.I.

    2010-01-01

    Full Text Available Realization of motion potential of a human happens more often in the process of his competitive activity. Criteria for the assessment of such activity's success are sport trophies (medals, cups, certificates, diplomas and correspondence of competitive results to sport ranks and categories. Joint sport classification of Ukraine is an important regulatory enactment of the physical education and sports sphere of country's life activity, that's why requirements and regulations of sport ranks and categories conferment require scientific-pragmatic approach. Performance of powerlifters, who are divided into weight categories, has progressive and advanced character. These and other factories complicate solving of the problem according the definition of logical algorithm of the table forming of ranking standards.

  9. Paralympic sports medicine--current evidence in winter sport: considerations in the development of equipment standards for paralympic athletes.

    Science.gov (United States)

    Burkett, Brendan

    2012-01-01

    To highlight and discuss the considerations for the future development of equipment standards for Winter Paralympic sports. Literature searches were performed (in English) during May 2011 using the key words "technology, winter sport, Olympic, and Paralympic" in the computerized databases PubMed, PsycINFO, Science Direct, and Google Scholar. In addition, personal scientific observations were made at several Winter Paralympic Games. The retrieved articles were screened and assessed for relevance to the biological, biomechanical, and sport medicine aspects of equipment. There are 3 key areas in which technology has influenced sports performance in Paralympic winter sports, namely, specialized prostheses, crutch skis or outriggers (in lieu of poles), and sport-specific wheelchairs (such as the sit-ski). From a sport medicine perspective, a crucial factor not considered in the standard laboratory test of mechanical efficiency is the influence of the human-equipment connection, such as the stump-to-prosthesis interface or the required human-to-wheelchair control. This connectivity is critical to the effective operation of the assistive device. When assessing the efficiency of this equipment, the not-so-obvious, holistic, compensatory factors need to be considered. Assistive equipment is fundamental for a person with a disability to participate and compete in winter sport activities. Although there have been improvements in the mechanical function of some assistive devices, the key issue is matching the residual function of the person with the assistive equipment. Equitable access to this technology will also ensure that the fundamental spirit of fair play that underpins the Paralympic Games is maintained.

  10. Genetic testing and sports medicine ethics

    NARCIS (Netherlands)

    McNamee, M.J.; Muller, A.J.; van Hilvoorde, I.M.; Holm, S.

    2009-01-01

    Sports medicine ethics is neither a well established branch of sports medicine nor of medical ethics. It is therefore important to raise to more general awareness some of the significant ethical implications of sports medicine practices. The field of genetics in sports is likewise in its infancy and

  11. Norms for the sport competition anxiety test (SCAT) | Potgieter ...

    African Journals Online (AJOL)

    The Sport Competition Anxiety Test (SCAT) is a useful consultation tool for sport psychologists. A shortcoming of its use is the lack of norms for sport codes not popular in North America, for example, rugby, cricket, field hockey and netball. In this investivation the SCAT was admnistered to 1799 athletes over a period of ...

  12. Testing the Standard Model

    CERN Document Server

    Riles, K

    1998-01-01

    The Large Electron Project (LEP) accelerator near Geneva, more than any other instrument, has rigorously tested the predictions of the Standard Model of elementary particles. LEP measurements have probed the theory from many different directions and, so far, the Standard Model has prevailed. The rigour of these tests has allowed LEP physicists to determine unequivocally the number of fundamental 'generations' of elementary particles. These tests also allowed physicists to ascertain the mass of the top quark in advance of its discovery. Recent increases in the accelerator's energy allow new measurements to be undertaken, measurements that may uncover directly or indirectly the long-sought Higgs particle, believed to impart mass to all other particles.

  13. Using sport psychology in simulator testing

    Energy Technology Data Exchange (ETDEWEB)

    Primeau, T. [Bruce Power, Toronto, Ontario (Canada); Chandler, K. [Sport and Exercise Psychology Consulting, Windsor, Ontario (Canada)

    2007-07-01

    The paper will cover the methods of simulator testing at Bruce Power and the recent trial of using a sport psychology consultant to help candidates deal with the mental, physiological and emotional responses to simulator examinations. Previous research has shown that mental skills training can enhance the performance of both cognitive and physical skills. As such, it was hypothesized that a structured mental skills program would assist candidates in achieving optimal performance during simulator testing. The paper will be written as a descriptive piece. The paper will offer insight into the benefits of using mental skills training in preparation for simulator testing and the drawbacks as experienced by the Authorized Nuclear Operator (ANO). (author)

  14. Using sport psychology in simulator testing

    International Nuclear Information System (INIS)

    Primeau, T.; Chandler, K.

    2007-01-01

    The paper will cover the methods of simulator testing at Bruce Power and the recent trial of using a sport psychology consultant to help candidates deal with the mental, physiological and emotional responses to simulator examinations. Previous research has shown that mental skills training can enhance the performance of both cognitive and physical skills. As such, it was hypothesized that a structured mental skills program would assist candidates in achieving optimal performance during simulator testing. The paper will be written as a descriptive piece. The paper will offer insight into the benefits of using mental skills training in preparation for simulator testing and the drawbacks as experienced by the Authorized Nuclear Operator (ANO). (author)

  15. Testing applied in Brazilian studies in sport psychology

    Directory of Open Access Journals (Sweden)

    Andressa Melina Becker da Silva

    2015-02-01

    Full Text Available Sport Psychology is one of the areas of the expertise of psychologists that makes use assessment tools. Therefore depends on the construction and validation of instruments for this population. Examine the instruments cited in this literature can help in this process. This study examined the instruments validated for the Brazilian population, cited in national articles on Sport Psychology, from 2002 to 2012. The descriptors "validation", "test", "sport", and "Psychophysiology", were crossed with descriptors "anxiety", "stress", "depression", "motivation", "leadership", "aggression," "imagination," "humor," "self-esteem", and "self-efficacy" - on the electronic bases Periódicos/CAPES, SciELO-Brazil and PubMed, in January 2013. For 38 sports and other non-competitive, six instruments translated and validated in Brazil were found, but not yet assessed / approved by the Federal Council of Psychology. The inclusion of the psychophysiological measures in the evaluation process and the validation of the instruments applied to Sport Psychology are discusses.

  16. Agility in Team Sports: Testing, Training and Factors Affecting Performance.

    Science.gov (United States)

    Paul, Darren J; Gabbett, Tim J; Nassis, George P

    2016-03-01

    Agility is an important characteristic of team sports athletes. There is a growing interest in the factors that influence agility performance as well as appropriate testing protocols and training strategies to assess and improve this quality. The objective of this systematic review was to (1) evaluate the reliability and validity of agility tests in team sports, (2) detail factors that may influence agility performance, and (3) identify the effects of different interventions on agility performance. The review was undertaken in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. We conducted a search of PubMed, Google Scholar, Science Direct, and SPORTDiscus databases. We assessed the methodological quality of intervention studies using a customized checklist of assessment criteria. Intraclass correlation coefficient values were 0.80-0.91, 0.10-0.81, and 0.81-0.99 for test time using light, video, and human stimuli. A low-level reliability was reported for youth athletes using the video stimulus (0.10-0.30). Higher-level participants were shown to be, on average, 7.5% faster than their lower level counterparts. Reaction time and accuracy, foot placement, and in-line lunge movement have been shown to be related to agility performance. The contribution of strength remains unclear. Efficacy of interventions on agility performance ranged from 1% (vibration training) to 7.5% (small-sided games training). Agility tests generally offer good reliability, although this may be compromised in younger participants responding to various scenarios. A human and/or video stimulus seems the most appropriate method to discriminate between standard of playing ability. Decision-making and perceptual factors are often propositioned as discriminant factors; however, the underlying mechanisms are relatively unknown. Research has focused predominantly on the physical element of agility. Small-sided games and video training may offer effective

  17. Tests on standard concrete samples

    CERN Multimedia

    CERN PhotoLab

    1973-01-01

    Compression and tensile tests on standard concrete samples. The use of centrifugal force in tensile testing has been developed by the SB Division and the instruments were built in the Central workshops.

  18. Was the Conconi test validated by sporting success, expert opinion ...

    African Journals Online (AJOL)

    Despite scientific evidence to the contrary, a popular incremental field test for endurance athletes (Conconi Test) has been uncritically accepted as valid by some coaches and sport scientists. The Conconi Test is assumed a non-invasive measure of the anaerobic threshold through the identification of a coincident deflection ...

  19. Star Excursion Balance Test Performance Varies by Sport in Healthy Division I Collegiate Athletes.

    Science.gov (United States)

    Stiffler, Mikel R; Sanfilippo, Jennifer L; Brooks, M Alison; Heiderscheit, Bryan C

    2015-10-01

    Cross-sectional. To describe performance and asymmetry on the Star Excursion Balance Test (SEBT) by sex and sport, and to determine if differences exist within a collegiate athlete population. Performance on the SEBT may differ between sexes and levels of competition, though the results of previous studies have been inconsistent. Investigation of performance and asymmetry differences between sports is limited. Sex- and sport-specific reference values likely need to be determined to best assess SEBT performance. Performance on the SEBT was retrospectively reviewed in 393 healthy National Collegiate Athletic Association Division I collegiate athletes from 8 sports. Means, standard deviations, and 95% confidence intervals were calculated for all variables. Normalized reach distance (percent limb length) and asymmetry between limbs were compared for the anterior (ANT), posterolateral (PL), and posteromedial (PM) directions and for the composite (COMP) score using a 2-way analysis of variance (ANOVA) of sex by sport, and a 1-way ANOVA to separately compare sports within each sex. Average normalized reach distance ranged from 62% to 69%, 84% to 97%, and 99% to 113% in the ANT, PL, and PM directions, respectively, and from 82% to 92% in the COMP score. Normalized asymmetry ranged from 3% to 4%, 5% to 8%, and 5% to 6% in the ANT, PL, and PM directions, respectively. A significant sex-by-sport interaction (P = .039) was observed in the ANT direction, with a sex effect for soccer players (Psport.

  20. Machine for development impact tests in sports seats and similar

    Science.gov (United States)

    Gonçalves, R. M.

    2015-10-01

    This paper describes the stages of development of a machine to perform impact tests in sport seats, seats for spectators and multiple seats. This includes reviews and recommendations for testing laboratories that have needs similar to the laboratory where unfolded this process.The machine was originally developed seeking to meet certain impact tests in accordance with the NBR15925 standards; 15878 and 16031. The process initially included the study of the rules and the election of the tests for which the machine could be developed and yet all reports and outcome of interaction with service providers and raw materials.For operating facility, it was necessary to set entirely the machine control, which included the concept of dialogue with operator, the design of the menu screens and the procedures for submission and registration of results. To ensure reliability in the process, the machine has been successfully calibrated according to the requirements of the Brazilian network of calibration.The criticism to this enterprise covers the technical and economic aspects involved and points out the main obstacles that were needed to overcome.

  1. Machine for development impact tests in sports seats and similar

    International Nuclear Information System (INIS)

    Gonçalves, R M

    2015-01-01

    This paper describes the stages of development of a machine to perform impact tests in sport seats, seats for spectators and multiple seats. This includes reviews and recommendations for testing laboratories that have needs similar to the laboratory where unfolded this process.The machine was originally developed seeking to meet certain impact tests in accordance with the NBR15925 standards; 15878 and 16031. The process initially included the study of the rules and the election of the tests for which the machine could be developed and yet all reports and outcome of interaction with service providers and raw materials.For operating facility, it was necessary to set entirely the machine control, which included the concept of dialogue with operator, the design of the menu screens and the procedures for submission and registration of results. To ensure reliability in the process, the machine has been successfully calibrated according to the requirements of the Brazilian network of calibration.The criticism to this enterprise covers the technical and economic aspects involved and points out the main obstacles that were needed to overcome. (paper)

  2. Standard Test Method for Sandwich Corrosion Test

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method defines the procedure for evaluating the corrosivity of aircraft maintenance chemicals, when present between faying surfaces (sandwich) of aluminum alloys commonly used for aircraft structures. This test method is intended to be used in the qualification and approval of compounds employed in aircraft maintenance operations. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements appear in Section 9.

  3. Tests for the Assessment of Sport-Specific Performance in Olympic Combat Sports: A Systematic Review With Practical Recommendations.

    Science.gov (United States)

    Chaabene, Helmi; Negra, Yassine; Bouguezzi, Raja; Capranica, Laura; Franchini, Emerson; Prieske, Olaf; Hbacha, Hamdi; Granacher, Urs

    2018-01-01

    The regular monitoring of physical fitness and sport-specific performance is important in elite sports to increase the likelihood of success in competition. This study aimed to systematically review and to critically appraise the methodological quality, validation data, and feasibility of the sport-specific performance assessment in Olympic combat sports like amateur boxing, fencing, judo, karate, taekwondo, and wrestling. A systematic search was conducted in the electronic databases PubMed, Google-Scholar, and Science-Direct up to October 2017. Studies in combat sports were included that reported validation data (e.g., reliability, validity, sensitivity) of sport-specific tests. Overall, 39 studies were eligible for inclusion in this review. The majority of studies (74%) contained sample sizes sport-specific tests (intraclass correlation coefficient [ICC] = 0.43-1.00). Content validity was addressed in all included studies, criterion validity (only the concurrent aspect of it) in approximately half of the studies with correlation coefficients ranging from r = -0.41 to 0.90. Construct validity was reported in 31% of the included studies and predictive validity in only one. Test sensitivity was addressed in 13% of the included studies. The majority of studies (64%) ignored and/or provided incomplete information on test feasibility and methodological limitations of the sport-specific test. In 28% of the included studies, insufficient information or a complete lack of information was provided in the respective field of the test application. Several methodological gaps exist in studies that used sport-specific performance tests in Olympic combat sports. Additional research should adopt more rigorous validation procedures in the application and description of sport-specific performance tests in Olympic combat sports.

  4. Exercise testing in Warmblood sport horses under field conditions

    NARCIS (Netherlands)

    Munsters, Carolien C B M; van Iwaarden, Alexandra; van Weeren, René|info:eu-repo/dai/nl/074628550; Sloet van Oldruitenborgh-Oosterbaan, Marianne M|info:eu-repo/dai/nl/075234394

    2014-01-01

    Regular exercise testing in Warmblood sport horses may, as in racing, potentially help to characterise fitness indices in different disciplines and at various competition levels and assist in understanding when a horse is 'fit to compete'. In this review an overview is given of the current state of

  5. A methodology for testing the erosive potential of sports drinks.

    Science.gov (United States)

    Hooper, S M; Hughes, J A; Newcombe, R G; Addy, M; West, N X

    2005-04-01

    The aim of the study was to develop and test a methodology in situ, which simulated the consumption of sports drinks. A secondary aim was to assess the acceptability of the method to sedentary participants. To select the sports drink for the study in situ, five commercially available sports drinks were examined for erosive potential in vitro. The study in situ was a single centre, 2-period, 2-treatment crossover study to compare the erosive effect of a commercially available sports drink (Test), with that of mineral water (Control), over 10 day periods on 10 healthy volunteers. Subjects wore upper removable appliances containing two human enamel specimens from 9 a.m. to 5 p.m. The regimen of intake of the drinks was 350 ml in 10, 5-min rest, 650 ml in 25, 5-min rest, 500 ml in 10 and 5-min rest. Measurements of enamel loss were made on samples after 5 and 10 days by profilometry. The in situ study showed a statistically significant difference in erosive potential between the test and control beverages. No specimen exposed to the control beverage displayed appreciable erosion. Erosion occurred with the test drink, but to a variable degree between subjects. The subjects unanimously found the drinking regimen unpleasant. The sports drink caused significantly more erosion in situ than water and as seen in other studies, there was marked variation in susceptibility to erosion between subjects. The new drinking regimen was designed to simulate pre, during and post-exercise intake. Although all the sedentary subjects participating in this study reported that they found the volume of fluids consumed over a short period of time excessive it is unlikely that this would prove problematic in the exercise environment.

  6. Beyond the Bruce Protocol: Advanced Exercise Testing for the Sports Cardiologist.

    Science.gov (United States)

    Sarma, Satyam; Levine, Benjamin D

    2016-11-01

    Exercise testing is an important tool for determining baseline fitness as well as to diagnose limitations in performance. The Bruce protocol has become the standard for exercise testing protocol in many exercise physiology laboratories, but is rarely a suitable test for athletes who often have complex hemodynamic and metabolic demands during exercise required for practice and competition. We describe the approach for exercise testing beyond the Bruce protocol and focus on strategies to individualize the testing protocol to the metabolic demands of an athlete's sport. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. [Historical development of drug testing in Swiss equestrian sports].

    Science.gov (United States)

    Bachmann, V; von Salis, B; Fürst, A

    2016-04-01

    The goal of this study was to describe the development of equine drug testing in horses in Switzerland. This was achieved through evaluation of a film made by the Institute of Forensic Medicine at the University of Basel entitled 'Doping von Rennpferden' [Doping of Race Horses], toxicological detection, 1962', the analysis of doping test results of the Swiss Equestrian Federation and by interviewing individuals of various professions who were involved in equine drug testing at the time. The study compares early and modern methods of drug testing and highlights the changes in the attitude of equestrian athletes, horse owners and the general public toward doping in equestrian sports. The high sensitivity of modern analytical methods allows the detection of drugs at levels considerably below therapeutic concentrations. This has resulted in a shift from zero tolerance for Controlled Medication Substances to the establishment of sub-therapeutic threshold concentrations. The lists of performance-enhancing drugs used in doping are updated continually. It became clear from this work that in the early 1960s, Switzerland played a leadership role in anti-doping in equestrian sports, and that the efforts to keep the sport free of performance-enhancing drugs remain exemplary.

  8. Coefficient of restitution of sports balls: A normal drop test

    Science.gov (United States)

    Haron, Adli; Ismail, K. A.

    2012-09-01

    Dynamic behaviour of bodies during impact is investigated through impact experiment, the simplest being a normal drop test. Normally, a drop test impact experiment involves measurement of kinematic data; this includes measurement of incident and rebound velocity in order to calculate a coefficient of restitution (COR). A high speed video camera is employed for measuring the kinematic data where speed is calculated from displacement of the bodies. Alternatively, sensors can be employed to measure speeds, especially for a normal impact where there is no spin of the bodies. This paper compares experimental coefficients of restitution (COR) for various sports balls, namely golf, table tennis, hockey and cricket. The energy loss in term of measured COR and effects of target plate are discussed in relation to the material and construction of these sports balls.

  9. Coefficient of restitution of sports balls: A normal drop test

    International Nuclear Information System (INIS)

    Haron, Adli; Ismail, K A

    2012-01-01

    Dynamic behaviour of bodies during impact is investigated through impact experiment, the simplest being a normal drop test. Normally, a drop test impact experiment involves measurement of kinematic data; this includes measurement of incident and rebound velocity in order to calculate a coefficient of restitution (COR). A high speed video camera is employed for measuring the kinematic data where speed is calculated from displacement of the bodies. Alternatively, sensors can be employed to measure speeds, especially for a normal impact where there is no spin of the bodies. This paper compares experimental coefficients of restitution (COR) for various sports balls, namely golf, table tennis, hockey and cricket. The energy loss in term of measured COR and effects of target plate are discussed in relation to the material and construction of these sports balls.

  10. Generic and sport-specific reactive agility tests assess different qualities in court-based team sport athletes.

    Science.gov (United States)

    Scanlan, Aaron T; Wen, Neal; Kidcaff, Andrew P; Berkelmans, Daniel M; Tucker, Patrick S; Dalbo, Vincent J

    2016-03-01

    Comparisons between reactive agility tests incorporating generic and sport-specific stimuli have been performed only in field-based team sports. The aim of this study was to compare generic (light-based) and sport-specific (live opponent) reactive agility tests in court-based team sport athletes. Twelve semi-professional male basketball players (age: 25.9±6.7 yr; stature: 188.9±7.9 cm; body mass: 97.4±16.1 kg; predicted maximal oxygen uptake: 49.5±5.3 mL/kg 7 min) completed multiple trials of a Reactive Agility Test containing light-based (RAT-Light) and opponent-based stimuli (RAT-Opponent). Multiple outcome measures were collected during the RAT-Light (agility time and total time) and RAT-Opponent (decision time and total time). Mean performance times during the RAT-Light (2.233±0.224 s) were significantly (Pagility time and RAT-Opponent decision time (r10=0.20), while a trivial relationship was apparent between total performance times across tests (r10=0.02). Low commonality was observed between comparable measures across tests (R2=0-4%). Reactive agility tests containing light-based and live opponent stimuli appear to measure different qualities in court-based team sport athletes. Court-based team sport coaches and conditioning professionals should not use generic and sport-specific reactive agility tests interchangeably during athlete assessments.

  11. The Sport-Utility Vehicle: Debating Fuel-Economy Standards in Thermodynamics

    Science.gov (United States)

    Mayer, Shannon

    2008-01-01

    This paper describes a debate about national fuel-economy standards for sport-utility vehicles (SUVs) used as a foundation for exploring a public policy issue in the physical science classroom. The subject of automobile fuel economy benefits from a familiarity with thermodynamics, specifically heat engines, and is therefore applicable to a broad…

  12. 14 CFR 61.307 - What tests do I have to take to obtain a sport pilot certificate?

    Science.gov (United States)

    2010-01-01

    ... sport pilot certificate? 61.307 Section 61.307 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... INSTRUCTORS Sport Pilots § 61.307 What tests do I have to take to obtain a sport pilot certificate? To obtain a sport pilot certificate, you must pass the following tests: (a) Knowledge test. You must pass a...

  13. The "Volvo Effect"--Questioning Standardized Tests.

    Science.gov (United States)

    Wesson, Kenneth A.

    2001-01-01

    Questions current emphasis on standardized tests and discusses several factors about the tests that should prompt reevaluation of their usefulness. Issues discussed include: development and design of standardized tests; the correlation between test scores and socioeconomic position; the discrepancy between test designs and accurate reflection of…

  14. Analysis of Tests Evaluating Sport Climbers’ Strength and Isometric Endurance

    Directory of Open Access Journals (Sweden)

    Ozimek Mariusz

    2016-12-01

    Full Text Available The present study was designed to determine which types of specific tests provide an effective evaluation of strength and endurance in highly trained competitive sport climbers. The research process consisted of three basic components: the measurement of selected somatic characteristics of the climbers, the assessment of their physical conditioning, and a search for correlations between the anthropometric and “conditioning” variables on the one hand, and climber’s performance on the other. The sample of subjects consisted of 14 experienced volunteer climbers capable of handling 7a- 8a+/b on-sight rock climbing grades. The strongest correlations (Spearman’s rank were found between climber’s competence and the relative results of the finger strength test (r = 0.7; much lower, but still statistically significant coefficients were found between the level of competence and the results of the muscle endurance tests (r = 0.53 – 0.57. Climbers aspiring to attain an elite level must have strong finger and forearm muscles, but most of all, they must be capable of releasing their potential during specific motor capability tests engaging these parts of the body. The forearm muscles of elite climbers must also be very resistant to fatigue. Since highly trained athletes vary only slightly in body mass, this variable does not have a major effect on their performance during strength and endurance tests.

  15. Bibliography of non-destructive testing standards

    International Nuclear Information System (INIS)

    Venkataraman, L.; Khan, Subban

    1975-01-01

    A bibliography on non-destructive testing (NDT) standards issued by standards organisations of the U.K., the U.S.A., India, France and F.R. Germany and by the International Standards Organization has been compiled and arranged under the following topics: (1) radiographic testing (2) ultrasonic testing (3) eddy current testing (4) magnetic particle testing (5) liquid penetrant testing (6) magnetic testing and (7) NDT in general. The total number of standards listed in the bibliography is 195. (M.G.B.)

  16. The Influence of Physical Fitness and Playing Standard on Pacing Strategies During a Team-Sport Tournament.

    Science.gov (United States)

    Johnston, Rich D; Gabbett, Tim J; Jenkins, David G

    2015-11-01

    To assess the influence of playing standard and physical fitness on pacing strategies during a junior team-sport tournament. A between-groups, repeated-measures design was used. Twenty-eight junior team-sport players (age 16.6 ± 0.5 y, body mass 79.9 ± 12.0 kg) from a high-standard and low-standard team participated in a junior rugby league tournament, competing in 5 games over 4 d (4 × 40-min and 1 × 50-min game). Players wore global positioning system (GPS) microtechnology during each game to provide information on match activity profiles. The Yo-Yo Intermittent Recovery Test (level 1) was used to assess physical fitness before the competition. High-standard players had an initially higher pacing strategy than the low-standard players, covering greater distances at high (ES = 1.32) and moderate speed (ES = 1.41) in game 1 and moderate speed (ES = 1.55) in game 2. However, low-standard players increased their playing intensity across the competition (ES = 0.57-2.04). High-standard/high-fitness players maintained a similar playing intensity, whereas high-standard/low-fitness players reduced their playing intensities across the competition. Well-developed physical fitness allows for a higher-intensity pacing strategy that can be maintained throughout a tournament. High-standard/low-fitness players reduce playing intensity, most likely due to increased levels of fatigue as the competition progresses. Low-standard players adopt a pacing strategy that allows them to conserve energy to produce an "end spurt" in the latter games. Maximizing endurance fitness across an entire playing group will maximize playing intensity and minimize performance reductions during the latter stages of a tournament.

  17. Plain Talk About Standardized Tests. Research Report.

    Science.gov (United States)

    Ward, James G.; Gould, Jewell C.

    This handbook, in two parts, constitutes a manual prepared by the American Federation of Teachers, for improving teachers' use of standardized tests. Part I outlines basic concepts and issues surrounding standardized testing for teachers, parents and school administrators. The terms norm-referenced tests, criterion referenced tests, minimum…

  18. Rock Testing Handbook (Test Standards 1993)

    Science.gov (United States)

    1993-01-01

    Chemistry , Houghton Minihn Co.. New (15) Leggeit, R. F., Geology and Engineering, McGraw-Hill Book Co., York, NY (1947). Inc._ New York, NY (1939). (38... tesied from the some setup using a large- diameter drill to advance between tests. The direction of loading necessarily coincides with the drill hole...Geological Survey Professional Paper 205-B (1945). Co., Chicago. IL (1939). (37) Hartman, R. J., Colloid Chemistry , Houghton Mifflin Co.. New (15) Leggett

  19. Ethics of genetic testing and research in sport: a position statement from the Australian Institute of Sport

    Science.gov (United States)

    Vlahovich, Nicole; Fricker, Peter A; Brown, Matthew A; Hughes, David

    2017-01-01

    As Australia's peak high-performance sport agency, the Australian Institute of Sport (AIS) has developed this position statement to address the implications of recent advances in the field of genetics and the ramifications for the health and well-being of athletes. Genetic testing has proven of value in the practice of clinical medicine. There are, however, currently no scientific grounds for the use of genetic testing for athletic performance improvement, sport selection or talent identification. Athletes and coaches should be discouraged from using direct-to-consumer genetic testing because of its lack of validation and replicability and the lack of involvement of a medical practitioner in the process. The transfer of genetic material or genetic modification of cells for performance enhancement is gene doping and should not be used on athletes. There are, however, valid roles for genetic research and the AIS supports genetic research which aims to enhance understanding of athlete susceptibility to injury or illness. Genetic research is only to be conducted after careful consideration of a range of ethical concerns which include the provision of adequate informed consent. The AIS is committed to providing leadership in delivering an ethical framework that protects the well-being of athletes and the integrity of sport, in the rapidly changing world of genomic science. PMID:27899345

  20. Predictability of physiological testing and the role of maturation in talent identification for adolescent team sports.

    Science.gov (United States)

    Pearson, D T; Naughton, G A; Torode, M

    2006-08-01

    Entrepreneurial marketing of sport increases demands on sport development officers to identify talented individuals for specialist development at the youngest possible age. Talent identification results in the streamlining of resources to produce optimal returns from a sports investment. However, the process of talent identification for team sports is complex and success prediction is imperfect. The aim of this review is to describe existing practices in physiological tests used for talent identification in team sports and discuss the impact of maturity-related differences on the long term outcomes particularly for male participants. Maturation is a major confounding variable in talent identification during adolescence. A myriad of hormonal changes during puberty results in physical and physiological characteristics important for sporting performance. Significant changes during puberty make the prediction of adult performance difficult from adolescent data. Furthermore, for talent identification programs to succeed, valid and reliable testing procedures must be accepted and implemented in a range of performance-related categories. Limited success in scientifically based talent identification is evident in a range of team sports. Genetic advances challenge the ethics of talent identification in adolescent sport. However, the environment remains a significant component of success prediction in sport. Considerations for supporting talented young male athletes are discussed.

  1. Energy Expenditure and Lactate Concentration in Sports Dancers in a Simulated Final Round of the Standard Style Competition

    Directory of Open Access Journals (Sweden)

    Pilch Wanda

    2017-06-01

    Full Text Available Purpose. To determine the energy expenditure in dancers and the nature of energy transformations which take place during a simulated final round of sports dance competition in standard style.

  2. Besting Testing Hysteria: Reasonable Preparation for Standardized Tests.

    Science.gov (United States)

    Field, Sherry L.

    2000-01-01

    Explores the content of the Iowa Test of Basic Skills (ITBS) and describes similarities between the ITBS and the National Council for the Social Studies (NCSS) standards. Addresses three NCSS standards and how each may be represented on a standardized test. Provides eight confidence-boosting principles. (CMK)

  3. Empiric reliability of diagnostic and prognostic estimations of physical standards of children, going in for sports.

    Directory of Open Access Journals (Sweden)

    Zaporozhanov V.A.

    2012-12-01

    Full Text Available In the conditions of sporting-pedagogical practices objective estimation of potential possibilities gettings busy already on the initial stages of long-term preparation examined as one of issues of the day. The proper quantitative information allows to individualize preparation of gettings in obedience to requirements to the guided processes busy. Research purpose - logically and metrical to rotin expedience of metrical method of calculations of reliability of results of the control measurings, in-use for diagnostics of psychophysical fitness and prognosis of growth of trade gettings busy in the select type of sport. Material and methods. Analysed the results of the control measurings on four indexes of psychophysical preparedness and estimation of experts of fitness 24th gettings busy composition of children of gymnastic school. The results of initial and final inspection of gymnasts on the same control tests processed the method of mathematical statistics. Expected the metrical estimations of reliability of measurings is stability, co-ordination and informing of control information for current diagnostics and prognosis of sporting possibilities inspected. Results. Expedience of the use in these aims of metrical operations of calculation of complex estimation of the psychophysical state of gettings busy is metrology grounded. Conclusions. Research results confirm expedience of calculation of complex estimation of psychophysical features gettings busy for diagnostics of fitness in the select type of sport and trade prognosis on the subsequent stages of preparation.

  4. Blood tests in tired elite athletes: expectations of athletes, coaches and sport science/sports medicine staff.

    Science.gov (United States)

    Fallon, K E

    2007-01-01

    The issue of the expectations of elite athletes, their coaches and non-medically qualified athlete support staff of consultations with sports physicians has not been previously dealt with in the sports medicine literature. As fulfillment of expectations of the content of a consultation may influence patient's satisfaction and clinical outcome, it is important to assess the expectations of athletes and, most importantly, coaches. To assess the expectations and beliefs about fatigue, particularly in relation to blood tests, of athletes, their coaches and support staff in the specific context of tiredness of non-medically qualified sports medicine staff, 22 elite coaches and 62 elite athletes from the Australian Institute of Sport were included in this study. A single questionnaire. The expectation for a blood test at the initial consultation for short-term fatigue was particularly high among athletes (81%) and coaches (91%). This expectation increased in athletes if their performance was worsening. All groups unanimously suggested that a blood test be performed in cases of more prolonged fatigue. Increase in total training load was perceived to be the most important cause of fatigue, but issues relating to sleep were also thought to be highly relevant. All groups suggested that blood tests provide some degree of reassurance, and all groups suggested that the most important blood tests that might be performed related to exclusion of iron deficiency, anaemia and infection. Athletes and their coaches generally expect that blood tests will be performed even when fatigue has been present for athletes, coaches and doctors need to be considered when deciding on whether such testing has to be performed.

  5. Academy of nutrition and dietetics: revised 2014 standards of practice and standards of professional performance for registered dietitian nutritionists (competent, proficient, and expert) in sports nutrition and dietetics.

    Science.gov (United States)

    Steinmuller, Patricia L; Kruskall, Laura J; Karpinski, Christine A; Manore, Melinda M; Macedonio, Michele A; Meyer, Nanna L

    2014-04-01

    Sports nutrition and dietetics addresses relationships of nutrition with physical activity, including weight management, exercise, and physical performance. Nutrition plays a key role in the prevention and treatment of obesity and chronic disease and for maintenance of health, and the ability to engage in physical activity, sports, and other aspects of physical performance. Thus, the Sports, Cardiovascular, and Wellness Nutrition Dietetic Practice Group, with guidance from the Academy of Nutrition and Dietetics Quality Management Committee, has developed the Revised 2014 Standards of Practice and Standards of Professional Performance as a resource for Registered Dietitian Nutritionists working in sports nutrition and dietetics to assess their current skill levels and to identify areas for further professional development in this emerging practice area. The revised document reflects advances in sports nutrition and dietetics practice since the original standards were published in 2009 and replaces those standards. The Standards of Practice represents the four steps in the Nutrition Care Process as applied to the care of patients/clients. The Standards of Professional Performance covers six standards of professional performance: quality in practice, competence and accountability, provision of services, application of research, communication and application of knowledge, and utilization and management of resources. Within each standard, specific indicators provide measurable action statements that illustrate how the standards can be applied to practice. The indicators describe three skill levels (competent, proficient, and expert) for Registered Dietitian Nutritionists working in sports nutrition and dietetics. The Standards of Practice and Standards of Professional Performance are complementary resources for Registered Dietitian Nutritionists in sports nutrition and dietetics practice. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc

  6. Standard leach tests for nuclear waste materials

    International Nuclear Information System (INIS)

    Strachan, D.M.; Barnes, B.O.; Turcotte, R.P.

    1980-01-01

    Five leach tests were conducted to study time-dependent leaching of waste forms (glass). The first four tests include temperature as a variable and the use of three standard leachants. Three of the tests are static and two are dynamic (flow). This paper discusses the waste-form leach tests and presents some representative data. 4 figures

  7. Standards for educational and psychological testing

    CERN Document Server

    2014-01-01

    Developed jointly by the American Educational Research Association, American Psychological Association, and the National Council on Measurement in Education, Standards for Educational and Psychological Testing (Revised 2014) addresses professional and technical issues of test development and use in education, psychology, and employment. It includes changes in federal law and measurement trends affecting validity, testing individuals with disabilities or different linguistic backgrounds, and new types of tests, as well as new uses of existing tests.

  8. 76 FR 74078 - Standard Mail Market Test

    Science.gov (United States)

    2011-11-30

    ... POSTAL REGULATORY COMMISSION [Docket No. MT2011-3; Order No. 998] Standard Mail Market Test AGENCY... Service application for an exemption from the annual revenue limitation that applies to market tests of... limitation in any year during the test of an experimental market dominant product.\\1\\ Pursuant to 39 U.S.C...

  9. Two baselines are better than one: Improving the reliability of computerized testing in sports neuropsychology.

    Science.gov (United States)

    Bruce, Jared; Echemendia, Ruben; Tangeman, Lindy; Meeuwisse, Willem; Comper, Paul; Hutchison, Michael; Aubry, Mark

    2016-01-01

    Computerized neuropsychological tests are frequently used to assist in return-to-play decisions following sports concussion. However, due to concerns about test reliability, the Centers for Disease Control and Prevention recommends yearly baseline testing. The standard practice that has developed in baseline/postinjury comparisons is to examine the difference between the most recent baseline test and postconcussion performance. Drawing from classical test theory, the present study investigated whether temporal stability could be improved by taking an alternate approach that uses the aggregate of 2 baselines to more accurately estimate baseline cognitive ability. One hundred fifteen English-speaking professional hockey players with 3 consecutive Immediate Postconcussion Assessment and Testing (ImPACT) baseline tests were extracted from a clinical program evaluation database overseen by the National Hockey League and National Hockey League Players' Association. The temporal stability of ImPACT composite scores was significantly increased by aggregating test performance during Sessions 1 and 2 to predict performance during Session 3. Using this approach, the 2-factor Memory (r = .72) and Speed (r = .79) composites of ImPACT showed acceptable long-term reliability. Using the aggregate of 2 baseline scores significantly improves temporal stability and allows for more accurate predictions of cognitive change following concussion. Clinicians are encouraged to estimate baseline abilities by taking into account all of an athlete's previous baseline scores.

  10. Neutron Sources for Standard-Based Testing

    Energy Technology Data Exchange (ETDEWEB)

    Radev, Radoslav [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McLean, Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-11-10

    The DHS TC Standards and the consensus ANSI Standards use 252Cf as the neutron source for performance testing because its energy spectrum is similar to the 235U and 239Pu fission sources used in nuclear weapons. An emission rate of 20,000 ± 20% neutrons per second is used for testing of the radiological requirements both in the ANSI standards and the TCS. Determination of the accurate neutron emission rate of the test source is important for maintaining consistency and agreement between testing results obtained at different testing facilities. Several characteristics in the manufacture and the decay of the source need to be understood and accounted for in order to make an accurate measurement of the performance of the neutron detection instrument. Additionally, neutron response characteristics of the particular instrument need to be known and taken into account as well as neutron scattering in the testing environment.

  11. Monitoring neuromuscular fatigue in team-sport athletes using a cycle-ergometer test.

    Science.gov (United States)

    Wehbe, George; Gabett, Tim J; Dwyer, Dan; McLellan, Christopher; Coad, Sam

    2015-04-01

    To compare a novel sprint test on a cycle ergometer with a countermovement-jump (CMJ) test for monitoring neuromuscular fatigue after Australian rules football match play. Twelve elite under-18 Australian rules football players (mean ± SD age 17.5 ± 0.6 y, stature 184.7 ± 8.8 cm, body mass 75.3 ± 7.8 kg) from an Australian Football League club's Academy program performed a short sprint test on a cycle ergometer along with a single CMJ test 1 h prematch and 1, 24, and 48 h postmatch. The cycle-ergometer sprint test involved a standardized warm-up, a maximal 6-s sprint, a 1-min active recovery, and a 2nd maximal 6-s sprint, with the highest power output of the 2 sprints recorded as peak power (PP). There were small to moderate differences between postmatch changes in cycle-ergometer PP and CMJ PP at 1 (ES = 0.49), 24 (ES = -0.85), and 48 h postmatch (ES = 0.44). There was a substantial reduction in cycle-ergometer PP at 24 h postmatch (ES = -0.40) compared with 1 h prematch. The cycle-ergometer sprint test described in this study offers a novel method of neuromuscular-fatigue monitoring in team-sport athletes and specifically quantifies the concentric component of the fatigue-induced decrement of force production in muscle, which may be overlooked by a CMJ test.

  12. Sport-Specific Motor Fitness Tests in Water Polo: Reliability, Validity and Playing Position Differences

    Directory of Open Access Journals (Sweden)

    Ognjen Uljevic

    2013-12-01

    Full Text Available Sport-specific motor fitness tests are not often examined in water polo. In this study we examined the reliability, factorial and discriminative validity of 10 water-polo-specific motor-fitness tests, namely: three tests of in-water jumps (thrusts, two characteristic swimming sprints (10 and 20 metres from the water start, three ball-throws (shoots, one test of passing precision (accuracy, and a test of the dynamometric force produced while using the eggbeater kick. The sample of subjects consisted of 54 young male water polo players (15 to 17 years of age; 1.86 ± 0.07 m, and 83.1 ± 9.9 kg. All tests were applied over three testing trials. Reliability analyses included Cronbach Alpha coefficients (CA, inter-item- correlations (IIR and coefficients of the variation (CV, while an analysis of variance was used to define any systematic bias between the testing trials. All tests except the test of accuracy (precision were found to be reliable (CA ranged from 0.83 to 0.97; IIR from 0.62 to 0.91; CV from 2% to 21%; with small and irregular biases between the testing trials. Factor analysis revealed that jumping capacities as well as throwing and sprinting capacities should be observed as a relatively independent latent dimensions among young water polo players. Discriminative validity of the applied tests is partially proven since the playing positions significantly (p < 0.05 differed in some of the applied tests, with the points being superior in their fitness capacities in comparison to their teammates. This study included players from one of the world’s best junior National leagues, and reported values could be used as fitness standards for such an age. Further studies are needed to examine the applicability of the proposed test procedures to older subjects and females.

  13. Standardized Definitions for Code Verification Test Problems

    Energy Technology Data Exchange (ETDEWEB)

    Doebling, Scott William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-09-14

    This document contains standardized definitions for several commonly used code verification test problems. These definitions are intended to contain sufficient information to set up the test problem in a computational physics code. These definitions are intended to be used in conjunction with exact solutions to these problems generated using Exact- Pack, www.github.com/lanl/exactpack.

  14. College Athletes and Drug Testing: Attitudes and Behaviors by Gender and Sport

    OpenAIRE

    Schneider, Dona; Morris, Joyce

    1993-01-01

    We surveyed varsity athletes at a Big East university to assess attitudes toward a mandatory drug education and testing program and examined whether there were differences in drug-related attitudes and behaviors based on gender or varsity sport. We found no statistically significant differences in personal drug use behaviors based on gender or team affiliation. Attitudes about drug use and knowledge of a teammate using drugs did show significant differences based on varsity sport. Tennis play...

  15. Standard test method for instrumented impact testing of metallic materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This standard establishes the requirements for performing instrumented Charpy V-Notch (CVN) and instrumented Miniaturized Charpy V-Notch (MCVN) impact tests on metallic materials. This method, which is based on experience developed testing steels, provides further information (in addition to the total absorbed energy) on the fracture behavior of the tested materials. Minimum requirements are given for measurement and recording equipment such that similar sensitivity and comparable total absorbed energy measurements to those obtained in Test Methods E 23 and E 2248 are achieved. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  16. Objective vestibular testing of children with dizziness and balance complaints following sports-related concussions.

    Science.gov (United States)

    Zhou, Guangwei; Brodsky, Jacob R

    2015-06-01

    To conduct objective assessment of children with balance and vestibular complaints following sports-related concussions and identify the underlying deficits by analyzing laboratory test outcomes. Case series with chart review. Pediatric tertiary care facility. Medical records were reviewed of 42 pediatric patients with balance and/or vestibular complaints following sports-related concussions who underwent comprehensive laboratory testing on their balance and vestibular function. Patients' characteristics were summarized and results analyzed. More than 90% of the children with protracted dizziness or imbalance following sports-related concussion had at least 1 abnormal finding from the comprehensive balance and vestibular evaluation. The most frequent deficit was found in dynamic visual acuity test, followed by Sensory Organization Test and rotational test. Patient's balance problem associated with concussion seemed to be primarily instigated by vestibular dysfunction. Furthermore, semicircular canal dysfunction was involved more often than dysfunction of otolith organs. Yet, sports-related concussion. Vestibular impairment is common among children with protracted dizziness or imbalance following sports-related concussion. Our study demonstrated that proper and thorough evaluation is imperative to identify these underlying deficits and laboratory tests were helpful in the diagnosis and recommendation of following rehabilitations. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2015.

  17. Critical overview of applications of genetic testing in sport talent identification.

    Science.gov (United States)

    Roth, Stephen M

    2012-12-01

    Talent identification for future sport performance is of paramount interest for many groups given the challenges of finding and costs of training potential elite athletes. Because genetic factors have been implicated in many performance- related traits (strength, endurance, etc.), a natural inclination is to consider the addition of genetic testing to talent identification programs. While the importance of genetic factors to sport performance is generally not disputed, whether genetic testing can positively inform talent identification is less certain. The present paper addresses the science behind the genetic tests that are now commercially available (some under patent protection) and aimed at predicting future sport performance potential. Also discussed are the challenging ethical issues that emerge from the availability of these tests. The potential negative consequences associated with genetic testing of young athletes will very likely outweigh any positive benefit for sport performance prediction at least for the next several years. The paper ends by exploring the future possibilities for genetic testing as the science of genomics in sport matures over the coming decade(s).

  18. Standard test methods of tension testing of metallic foil

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1993-01-01

    1.1 These test methods cover the tension testing of metallic foil at room temperature in thicknesses less than 0.006 in. (0.150 mm). Note 1—Exception to these methods may be necessary in individual specifications or test methods for a particular material. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  19. The skin prick test – European standards

    Directory of Open Access Journals (Sweden)

    Heinzerling Lucie

    2013-02-01

    Full Text Available Abstract Skin prick testing is an essential test procedure to confirm sensitization in IgE-mediated allergic disease in subjects with rhinoconjunctivitis, asthma, urticaria, anapylaxis, atopic eczema and food and drug allergy. This manuscript reviews the available evidence including Medline and Embase searches, abstracts of international allergy meetings and position papers from the world allergy literature. The recommended method of prick testing includes the appropriate use of specific allergen extracts, positive and negative controls, interpretation of the tests after 15 – 20 minutes of application, with a positive result defined as a wheal ≥3 mm diameter. A standard prick test panel for Europe for inhalants is proposed and includes hazel (Corylus avellana, alder (Alnus incana, birch (Betula alba, plane (Platanus vulgaris, cypress (Cupressus sempervirens, grass mix (Poa pratensis, Dactilis glomerata, Lolium perenne, Phleum pratense, Festuca pratensis, Helictotrichon pretense, Olive (Olea europaea, mugwort (Artemisia vulgaris, ragweed (Ambrosia artemisiifolia, Alternaria alternata (tenuis, Cladosporium herbarum, Aspergillus fumigatus, Parietaria, cat, dog, Dermatophagoides pteronyssinus, Dermatophagoides farinae, and cockroach (Blatella germanica. Standardization of the skin test procedures and standard panels for different geographic locations are encouraged worldwide to permit better comparisons for diagnostic, clinical and research purposes.

  20. Standardized Testing of Phasor Measurement Units

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Kenneth E.; Faris, Anthony J.; Hauer, John F.

    2006-05-31

    This paper describes a set of tests used to determine Phasor Measurement Unit (PMU) measurement characteristics under steady state and dynamic conditions. The methodology is repeatable, comparable among test facilities, and can be performed at any facility with commonly available relay and standard test equipment. The methodology is based upon using test signals that are mathematically generated from a signal model and played into the PMU with precise GPS synchronization. Timing flags included with the test signal provide correlate the test signals and the PMU output. This allows accurate comparison of the phasor model with the value estimated by the PMU for accurate performance analysis. The timing flags also facilitate programmed plot and report generation.

  1. Patch testing with Indian standard series

    Directory of Open Access Journals (Sweden)

    Narendra G

    2002-01-01

    Full Text Available Hundred patients (61 males, 39 females suspected to have allergic contact dermatitis were patch tested with Indian standard series (ISS. Forty four showed one or more positive reactions. The frequent sensitizers observed were nickel sulphate-12 (15%, potassium dichromate-11 (13.75%, cobalt chloride and colophony-7 (8.75% each, fragrance mix and thiuram mix-6 (7.5% each. The ISS differs from the European Standard Series by inclusion of propylene glycol, nitrofurazone, gentamicin, chlorocresol, PEG-400 and ethylenediamine chloride where assesquiterpene lactone mix and primin allergens are excluded.

  2. Reconceptualising the Standard of Care in Sport: The Case of Youth Rugby in England and South Africa

    Directory of Open Access Journals (Sweden)

    Steve Greenfield

    2015-12-01

    Full Text Available Sport is an important area of civil society in both South Africa and England, and this article is broadly concerned with the relationship between sport and personal injury. More specifically, the article compares how rugby is regulated by the tort of negligence in England and delict in South Africa respectively. Regarding liability, for sport there are very specific factors that need to be taken into account. The article is concerned with, firstly, the broader context of sport as an important social and cultural activity, and secondly the specific sporting context that includes the rules of the game as well as the playing culture, with a focus on rugby at junior level. Through a critical and comparative analysis of how the standards of care in sport have been developed in both jurisdictions, the aim of this article is to consider how sport specific elements can be incorporated into the traditional legal principles. This comparative analysis contextualises the various discussions in the light of the differences between the English tort of negligence and the South African law of delict. Our argument is that the context and specificity of rugby should be more explicitly taken into account when evaluating potential liability. To establish a standard of care for sport is complex, with many factors to be taken into account and balanced against one another. The law of negligence/delict therefore needs to be adaptable and flexible to resolve new situations where injuries have occurred. Even in established situations where liability has been previously determined, novel events do occur and knowledge develops that requires a reconsideration of the principles that govern liability. In junior rugby, the risk of very serious injuries is relatively small and the law needs to tread a cautious path through liability, ensuring it is a vehicle that promotes sport rather than creating barriers to its enjoyment and practice. A greater understanding of sport

  3. Computerized neurocognitive testing in the management of sport-related concussion: an update.

    Science.gov (United States)

    Resch, Jacob E; McCrea, Michael A; Cullum, C Munro

    2013-12-01

    Since the late nineties, computerized neurocognitive testing has become a central component of sport-related concussion (SRC) management at all levels of sport. In 2005, a review of the available evidence on the psychometric properties of four computerized neuropsychological test batteries concluded that the tests did not possess the necessary criteria to warrant clinical application. Since the publication of that review, several more computerized neurocognitive tests have entered the market place. The purpose of this review is to summarize the body of published studies on psychometric properties and clinical utility of computerized neurocognitive tests available for use in the assessment of SRC. A review of the literature from 2005 to 2013 was conducted to gather evidence of test-retest reliability and clinical validity of these instruments. Reviewed articles included both prospective and retrospective studies of primarily sport-based adult and pediatric samples. Summaries are provided regarding the available evidence of reliability and validity for the most commonly used computerized neurocognitive tests in sports settings.

  4. Dietary Intakes and Eating Habits of College Athletes: Are Female College Athletes Following the Current Sports Nutrition Standards?

    Science.gov (United States)

    Shriver, Lenka H.; Betts, Nancy M.; Wollenberg, Gena

    2013-01-01

    Objective: The objective of this study was to assess dietary intakes and eating habits of female college athletes and compared them with the minimum sports nutrition standards. Participants: Data were obtained from 52 female college athletes from a National Collegiate Athletic Association (NCAA) Division I university between January 2009 and May…

  5. Standard Penetration Test and Relative Density

    Science.gov (United States)

    1971-02-01

    Se OPSeS Debido a que el agua subterranea granclemente influve la resistencia a suelo , se establecio una relacion empirica entre el nurmero de golpes...en la prueba normal de penetraci’n (Standard Penetration Test) de una arena bajo el nivel freatico y el correspond- iente numero en una arena seca (ie...sobre el nivel freatico) con la misma densidad relativa. Asimisnmo, porque se encontr6 que el nu.- mero de golpes depende no solo de la densidad

  6. Standardization of penetrating radiation testing system

    International Nuclear Information System (INIS)

    Wiley, P.A.; Aronson, H.L.

    1979-01-01

    Standardization is provided to control system gain of a penetrating radiation testing system by periodically inspecting a reference object in the same manner as the product samples so as to generate a stabilization signal which is compared to a reference signal. The difference, if any, between the stabilization signal and the reference signal is integrated and the integrated signal is used to correct the gain of the system

  7. Standardization of Tests for Advanced Composites

    OpenAIRE

    石川, 隆司; ISHIKAWA, Takashi; 野口, 義男; NOGUCHI, Yoshio; 濱口, 泰正; HAMAGUCHI, Yasumasa

    2003-01-01

    Advanced composites are essentially the only feasible materials for the construction of newly developed aerospace vehicle. However, the path to be followed for the validation, evaluation and certification of composite aircraft structures is quite different from that of traditional metallic aircraft structures, and the importance of a composites database is now well recognized. A key issue in constructing a fully descriptive composites database is to establish standard composite test methods, ...

  8. Standard test method for dynamic tear testing of metallic materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1983-01-01

    1.1 This test method covers the dynamic tear (DT) test using specimens that are 3/16 in. to 5/8 in. (5 mm to 16 mm) inclusive in thickness. 1.2 This test method is applicable to materials with a minimum thickness of 3/16 in. (5 mm). 1.3 The pressed-knife procedure described for sharpening the notch tip generally limits this test method to materials with a hardness level less than 36 HRC. Note 1—The designation 36 HRC is a Rockwell hardness number of 36 on Rockwell C scale as defined in Test Methods E 18. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  9. Genetic Testing for Sports Performance, Responses to Training and Injury Risk: Practical and Ethical Considerations.

    Science.gov (United States)

    Williams, Alun G; Wackerhage, Henning; Day, Stephen H

    2016-01-01

    This paper addresses practical and ethical considerations regarding genetic tests to predict performance and/or risk of exercise-related injury or illness. Various people might wish to conduct sport-related genetic tests for a variety of reasons. For example, an individual might seek personal genetic information to help guide their own sport participation. A sports coach might wish to test young athletes to aid team selection or individualize training. A physician might want to predict the risk of injury or illness in athletes and advise regarding selection or preventative measures. An insurance company might seek to estimate the risk of career-threatening injury for athletes based partly on genetic information. Whilst this information is, in part, encoded in our DNA sequence, the available tests allow generally only a poor prediction of the aforementioned variables. In other words, the current genetic tests and analysis methods are not powerful enough to inform important decisions in sport to a substantial degree. It is particularly disappointing that more than half of the commercially available genetic tests related to exercise and sport do not appear to identify publicly the genetic variants they assess, making scrutiny by academic scholars and consumers (or their representatives) impossible. There are also challenging ethical issues to consider. For example, the imposition of genetic tests on individuals (especially young people) by third parties is potentially susceptible to abuse. Scientists and practitioners should understand the limitations of the tests currently available, the ethical concerns and the importance of counselling before and after testing so that they are only used in a responsible manner. © 2016 S. Karger AG, Basel.

  10. Reliability and Validity of a New Test of Change-of-Direction Speed for Field-Based Sports: the Change-of-Direction and Acceleration Test (CODAT).

    Science.gov (United States)

    Lockie, Robert G; Schultz, Adrian B; Callaghan, Samuel J; Jeffriess, Matthew D; Berry, Simon P

    2013-01-01

    Field sport coaches must use reliable and valid tests to assess change-of-direction speed in their athletes. Few tests feature linear sprinting with acute change- of-direction maneuvers. The Change-of-Direction and Acceleration Test (CODAT) was designed to assess field sport change-of-direction speed, and includes a linear 5-meter (m) sprint, 45° and 90° cuts, 3- m sprints to the left and right, and a linear 10-m sprint. This study analyzed the reliability and validity of this test, through comparisons to 20-m sprint (0-5, 0-10, 0-20 m intervals) and Illinois agility run (IAR) performance. Eighteen Australian footballers (age = 23.83 ± 7.04 yrs; height = 1.79 ± 0.06 m; mass = 85.36 ± 13.21 kg) were recruited. Following familiarization, subjects completed the 20-m sprint, CODAT, and IAR in 2 sessions, 48 hours apart. Intra-class correlation coefficients (ICC) assessed relative reliability. Absolute reliability was analyzed through paired samples t-tests (p ≤ 0.05) determining between-session differences. Typical error (TE), coefficient of variation (CV), and differences between the TE and smallest worthwhile change (SWC), also assessed absolute reliability and test usefulness. For the validity analysis, Pearson's correlations (p ≤ 0.05) analyzed between-test relationships. Results showed no between-session differences for any test (p = 0.19-0.86). CODAT time averaged ~6 s, and the ICC and CV equaled 0.84 and 3.0%, respectively. The homogeneous sample of Australian footballers meant that the CODAT's TE (0.19 s) exceeded the usual 0.2 x standard deviation (SD) SWC (0.10 s). However, the CODAT is capable of detecting moderate performance changes (SWC calculated as 0.5 x SD = 0.25 s). There was a near perfect correlation between the CODAT and IAR (r = 0.92), and very large correlations with the 20-m sprint (r = 0.75-0.76), suggesting that the CODAT was a valid change-of-direction speed test. Due to movement specificity, the CODAT has value for field sport

  11. Double standards for community sports: promoting active lifestyles but unhealthy diets.

    Science.gov (United States)

    Kelly, Bridget; Chapman, Kathy; King, Lesley; Hardy, Louise; Farrell, Louise

    2008-12-01

    Overweight and obesity in Australia is an emerging health concern. Obesity prevention initiatives must consider both physical activity and nutrition to be effective. Community sports venues have the capacity to promote healthy lifestyles through physical activity as well as healthy food choices. A telephone survey was conducted on parents of children aged 5-17 years in NSW to determine the nature of food and beverages purchased by children at community sporting venues and to determine parent's perception of the role that government should play in regulating the types of food and beverages sold at these outlets. The majority of canteens at children's sporting venues were considered to sell mostly unhealthy food and beverages (53%). Very few parents reported that canteens sold mostly healthy food and beverages. Parents reported that their child's most frequently purchased food and beverage items at outdoor sports fields were water, chocolate and confectionery, soft drink and sports drinks, and ice cream. At community swimming pools the most frequently purchased items were ice cream, followed by snack foods, including chips, cakes and biscuits. Most parents (63%) agreed that government should restrict the types of food and beverages that can be sold at children's sporting venues. Children are receiving inconsistent health messages at sporting venues, with healthy lifestyles being promoted through sports participation, but unhealthy dietary choices being provided at sports canteens.

  12. The Impact of Sport on the Overall Standard of Satisfaction of Students with Physical Disabilities

    Directory of Open Access Journals (Sweden)

    Bergendiová Flóra

    2017-05-01

    Full Text Available Life satisfaction is the main goal that people try to achieve in their lives. This study aims to broaden the knowledge of overall life satisfaction of physically handicapped students performing sports. The Satisfaction with Life scale was used to assess the overall life satisfaction SWLS and Emotional Habitual Subjective Well-Being questionnaire SEHP. The research sample consisted of 25 physically handicapped students. Based on their performance in physical education and sport they were divided into 2 groups: regularly active in sports (36 % and occasionally active in sports (64 %. The results showed at an interesting fact, 66 % of regularly active students in sports with a physical handicap were found on the high level of life satisfaction (44 % and extremely high level of life satisfaction (22.2 %, comparing to occasionally active students in sports, who supported only 18.8 % of the particular category. 12.5 % of occasionally active students in sports feel physical vigour, mainly after coming from physiotherapy and after getting enough sleep. Regularly active peers in sports feel physical vigour while performing physical education and sports or after finishing the activity. His spare time is devoted to fitness activities, swimming, table tennis and shooting.

  13. The "Anatomy" of a Performance-Enhancing Drug Test in Sports

    Science.gov (United States)

    Werner, T. C.

    2012-01-01

    The components of a performance-enhancing drug (PED) test in sports include sample selection, collection, establishing sample integrity, sample pretreatment, analyte detection, data evaluation, reporting results, and action taken based on the result. Undergraduate curricula generally focus on the detection and evaluation steps of an analytical…

  14. Colleges Eye Limit on Time Players Give to Sports, Tougher Tests for Drug Abuse.

    Science.gov (United States)

    Farrell, Charles S.

    1986-01-01

    The death of a basketball player at the University of Maryland is giving new impetus to proposals to toughen the testing of athletes for drugs and to tighten limits on the time college players devote to their sports. Developments at Maryland and the National Collegiate Athletic Association are described. (MLW)

  15. Experimentally testing the standard cosmological model

    Energy Technology Data Exchange (ETDEWEB)

    Schramm, D.N. (Chicago Univ., IL (USA) Fermi National Accelerator Lab., Batavia, IL (USA))

    1990-11-01

    The standard model of cosmology, the big bang, is now being tested and confirmed to remarkable accuracy. Recent high precision measurements relate to the microwave background; and big bang nucleosynthesis. This paper focuses on the latter since that relates more directly to high energy experiments. In particular, the recent LEP (and SLC) results on the number of neutrinos are discussed as a positive laboratory test of the standard cosmology scenario. Discussion is presented on the improved light element observational data as well as the improved neutron lifetime data. alternate nucleosynthesis scenarios of decaying matter or of quark-hadron induced inhomogeneities are discussed. It is shown that when these scenarios are made to fit the observed abundances accurately, the resulting conclusions on the baryonic density relative to the critical density, {Omega}{sub b}, remain approximately the same as in the standard homogeneous case, thus, adding to the robustness of the standard model conclusion that {Omega}{sub b} {approximately} 0.06. This latter point is the deriving force behind the need for non-baryonic dark matter (assuming {Omega}{sub total} = 1) and the need for dark baryonic matter, since {Omega}{sub visible} < {Omega}{sub b}. Recent accelerator constraints on non-baryonic matter are discussed, showing that any massive cold dark matter candidate must now have a mass M{sub x} {approx gt} 20 GeV and an interaction weaker than the Z{sup 0} coupling to a neutrino. It is also noted that recent hints regarding the solar neutrino experiments coupled with the see-saw model for {nu}-masses may imply that the {nu}{sub {tau}} is a good hot dark matter candidate. 73 refs., 5 figs.

  16. NASPE Sets the Standard: 35 Years of National Leadership in Sport and Physical Education

    Science.gov (United States)

    Zieff, Susan G.; Lumpkin, Angela; Guedes, Claudia; Eguaoje, Terry

    2009-01-01

    With 17,000 members, NASPE is the largest of the five national associations of the American Alliance for Health, Physical Education, Recreation and Dance (AAHPERD) and comprises six Academy Committees (Biomechanics; Curriculum and Instruction; Exercise Physiology; Motor Development and Learning; Sport and Exercise Psychology; and Sport History,…

  17. Motivation and engagement in music and sport: testing a multidimensional framework in diverse performance settings.

    Science.gov (United States)

    Martin, Andrew J

    2008-02-01

    The present study assessed the application of a multidimensional model of motivation and engagement (the Motivation and Engagement Wheel) and its accompanying instrumentation (the Motivation and Engagement Scale) to the music and sport domains. Participants were 463 young classical musicians (N=224) and sportspeople (N=239). In both music and sport samples, the data confirmed the good fit of the four hypothesized higher-order dimensions and their 11 first-order dimensions: adaptive cognitions (self-efficacy, valuing, mastery orientation), adaptive behaviors (planning, task management, persistence), impeding/maladaptive cognitions (uncertain control, anxiety, failure avoidance), and maladaptive behaviors (self-handicapping, disengagement). Multigroup tests of factor invariance showed that in terms of underlying motivational constructs and the composition of and relationships among these constructs, key subsamples are not substantially different. Moreover-and of particular relevance to issues around the generalizability of the framework-the factor structure for music and sport samples was predominantly invariant.

  18. Sport-specific fitness testing and intervention for an adolescent with cerebral palsy: a case report.

    Science.gov (United States)

    Kenyon, Lisa K; Sleeper, Mark D; Tovin, Melissa M

    2010-01-01

    This case report describes the development, implementation, and outcomes of a fitness-related intervention program that addressed the sport-specific goals of an adolescent with cerebral palsy. The participant in this case was a 16-year-old African American male with spastic diplegia. The participant joined his high school wrestling team and asked to focus his physical therapy on interventions that would improve his wrestling performance. An examination was performed using the muscle power sprint test, the 10 x 5-m sprint test, strength tests, the 10-m shuttle run test, and the Gross Motor Function Measure. The intervention consisted of interval training, which focused on the demands of wrestling. Scores on all tests and measures were higher after the intervention. The outcomes of this case report seem to support the use of a fitness-related intervention program for addressing the sport-specific goals of an adolescent with cerebral palsy.

  19. Consistency test of the standard model

    International Nuclear Information System (INIS)

    Pawlowski, M.; Raczka, R.

    1997-01-01

    If the 'Higgs mass' is not the physical mass of a real particle but rather an effective ultraviolet cutoff then a process energy dependence of this cutoff must be admitted. Precision data from at least two energy scale experimental points are necessary to test this hypothesis. The first set of precision data is provided by the Z-boson peak experiments. We argue that the second set can be given by 10-20 GeV e + e - colliders. We pay attention to the special role of tau polarization experiments that can be sensitive to the 'Higgs mass' for a sample of ∼ 10 8 produced tau pairs. We argue that such a study may be regarded as a negative selfconsistency test of the Standard Model and of most of its extensions

  20. Multipurpose laboratory test system applying CAMAC standards

    Energy Technology Data Exchange (ETDEWEB)

    Bowers, J.L.

    1976-11-01

    A flexible electronic product test and evaluation system is proposed. A system study was performed to determine how increasingly complex telemetry systems could be effectively evaluated during development and preproduction and after first production units were built. A primary requirement was that this system remain flexible with respect to configuration and mission and that it be easily maintainable. In addition, the system must be upgraded easily as old product requirements and definitions are replaced by new designs. As a result of this study it is concluded that this project would involve the expenditure of considerable funds and manpower at the beginning of the project and that the cost effectiveness of the system would be dependent upon its utilization and management. This study also demonstrates how the use of computer interface hardware standards (IEEE 583) can minimize requirements for expensive specially designed test equipment for each application.

  1. Standard-E hydrogen monitoring system shop acceptance test report

    International Nuclear Information System (INIS)

    Schneider, T.C.

    1997-01-01

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication

  2. Standard-E hydrogen monitoring system shop acceptance test procedure

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, T.C.

    1997-10-02

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication.

  3. Standard practice for instrumented indentation testing

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 This practice defines the basic steps of Instrumented Indentation Testing (IIT) and establishes the requirements, accuracies, and capabilities needed by an instrument to successfully perform the test and produce the data that can be used for the determination of indentation hardness and other material characteristics. IIT is a mechanical test that measures the response of a material to the imposed stress and strain of a shaped indenter by forcing the indenter into a material and monitoring the force on, and displacement of, the indenter as a function of time during the full loading-unloading test cycle. 1.2 The operational features of an IIT instrument, as well as requirements for Instrument Verification Annex A1), Standardized Reference Blocks (Annex A2) and Indenter Requirements (Annex A3) are defined. This practice is not intended to be a complete purchase specification for an IIT instrument. 1.3 With the exception of the non-mandatory Appendix X4, this practice does not define the analysis necessary...

  4. The Impact of Sport on the Overall Standard of Satisfaction of Students with Physical Disabilities

    OpenAIRE

    Bergendiová Flóra; Čierna Dušana

    2017-01-01

    Life satisfaction is the main goal that people try to achieve in their lives. This study aims to broaden the knowledge of overall life satisfaction of physically handicapped students performing sports. The Satisfaction with Life scale was used to assess the overall life satisfaction SWLS and Emotional Habitual Subjective Well-Being questionnaire SEHP. The research sample consisted of 25 physically handicapped students. Based on their performance in physical education and sport they were divid...

  5. College athletes and drug testing: attitudes and behaviors by gender and sport.

    Science.gov (United States)

    Schneider, D; Morris, J

    1993-01-01

    We surveyed varsity athletes at a Big East university to assess attitudes toward a mandatory drug education and testing program and examined whether there were differences in drug-related attitudes and behaviors based on gender or varsity sport. We found no statistically significant differences in personal drug use behaviors based on gender or team affiliation. Attitudes about drug use and knowledge of a teammate using drugs did show significant differences based on varsity sport. Tennis players were most likely to agree that drug use by college athletes is socially acceptable. Lacrosse players were most likely to know of atleast one teammate using drugs. Overall, attitudes towards the mandatory drug education and testing program were ambivalent. About half of our responding athletes believed drug testing was necessary and discouraged drug use. Only 17% believed that the program was an invasion of privacy.

  6. 42 CFR 493.1423 - Standard; Testing personnel qualifications.

    Science.gov (United States)

    2010-10-01

    ..., or bachelor's degree in a chemical, physical, biological or clinical laboratory science, or medical... HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Personnel for Nonwaived Testing Laboratories Performing Moderate Complexity Testing § 493.1423 Standard; Testing personnel...

  7. Experimental tests of the standard model

    International Nuclear Information System (INIS)

    Nodulman, L.

    1998-01-01

    The title implies an impossibly broad field, as the Standard Model includes the fermion matter states, as well as the forces and fields of SU(3) x SU(2) x U(1). For practical purposes, I will confine myself to electroweak unification, as discussed in the lectures of M. Herrero. Quarks and mixing were discussed in the lectures of R. Aleksan, and leptons and mixing were discussed in the lectures of K. Nakamura. I will essentially assume universality, that is flavor independence, rather than discussing tests of it. I will not pursue tests of QED beyond noting the consistency and precision of measurements of α EM in various processes including the Lamb shift, the anomalous magnetic moment (g-2) of the electron, and the quantum Hall effect. The fantastic precision and agreement of these predictions and measurements is something that convinces people that there may be something to this science enterprise. Also impressive is the success of the ''Universal Fermi Interaction'' description of beta decay processes, or in more modern parlance, weak charged current interactions. With one coupling constant G F , most precisely determined in muon decay, a huge number of nuclear instabilities are described. The slightly slow rate for neutron beta decay was one of the initial pieces of evidence for Cabbibo mixing, now generalized so that all charged current decays of any flavor are covered

  8. Experimental tests of the standard model.

    Energy Technology Data Exchange (ETDEWEB)

    Nodulman, L.

    1998-11-11

    The title implies an impossibly broad field, as the Standard Model includes the fermion matter states, as well as the forces and fields of SU(3) x SU(2) x U(1). For practical purposes, I will confine myself to electroweak unification, as discussed in the lectures of M. Herrero. Quarks and mixing were discussed in the lectures of R. Aleksan, and leptons and mixing were discussed in the lectures of K. Nakamura. I will essentially assume universality, that is flavor independence, rather than discussing tests of it. I will not pursue tests of QED beyond noting the consistency and precision of measurements of {alpha}{sub EM} in various processes including the Lamb shift, the anomalous magnetic moment (g-2) of the electron, and the quantum Hall effect. The fantastic precision and agreement of these predictions and measurements is something that convinces people that there may be something to this science enterprise. Also impressive is the success of the ''Universal Fermi Interaction'' description of beta decay processes, or in more modern parlance, weak charged current interactions. With one coupling constant G{sub F}, most precisely determined in muon decay, a huge number of nuclear instabilities are described. The slightly slow rate for neutron beta decay was one of the initial pieces of evidence for Cabbibo mixing, now generalized so that all charged current decays of any flavor are covered.

  9. Program specific admission testing and dropout for sports science students: a prospective cohort study

    DEFF Research Database (Denmark)

    O'Neill, Lotte; Christensen, Mette Krogh; Vonsild, Maria Cecilie

    2014-01-01

    Recent research in medical education suggests that program specific admission testing could have a protective effect against early dropout. Little is known about the effect of program specific admission testing on dropout in other areas of higher education. The aim of this paper was to examine if......-based admission. This result may fit with elements of previous dropout theory, student-environment fit theory and perhaps also with self-efficacy theory....... if admission strategy was also independently associated with dropout for sports science students in a university setting. The study design was a prospective cohort study with a 2 year follow-up. The population was 449 sports science students admitted to a university in the years 2002-2007. The analysis...

  10. Using basketball test battery to monitor players with mental retardation across 2 sports seasons.

    Science.gov (United States)

    Baldari, Carlo; Franciosi, Emanuele; Gallotta, Maria Chiara; Emerenziani, Gian Pietro; Reis, Victor Machado; Guidetti, Laura

    2009-11-01

    Although sport for athletes with mental retardation (MR) is achieving an important role, literature concerning basketball test and training is still poor. The aims of this study were to assess basketball ability before (PRE) and after (POST) a 6-month training in athletes with MR across 2 sports seasons (ss) and to analyze the variation of basketball abilities by subjects' MR level. Fifteen trained basketball players with MR participated (11 men and 4 women; age range 19-43 years; MR: 3 Mild, 8 Moderate, 3 Severe, and 1 Profound). Athletes were tested PRE and POST a 6-month training during 2 following sports seasons (ss1 and ss2). The tests assessed 4 ability levels, each one characterized by the analysis of 4 fundamental areas (ball handling, reception, passing, and shooting), divided into 5 specific components. The athletes' global score improved after training in both ss1 (41.5 +/- 12.0 vs. 48.6 +/- 15.4; p training caused a general improvement, especially evident in levels II and III in both ss. Global and level scores were negatively correlated to MR level (p training.

  11. Functional Testing Differences in Anterior Cruciate Ligament Reconstruction Patients Released Versus Not Released to Return to Sport.

    Science.gov (United States)

    Mayer, Stephanie W; Queen, Robin M; Taylor, Dean; Moorman, Claude T; Toth, Allison P; Garrett, William E; Butler, Robert J

    2015-07-01

    No standardized return-to-activity or sport guidelines currently exist after anterior cruciate ligament (ACL) reconstruction. Isokinetic testing and unilateral hop testing, which have construct validity, are often used to make the determination of when a patient is ready to return to sport. Neither of these measures has been reported to be predictive of subsequent injuries. To compare the performance on 2 functional tests of ACL reconstruction patients released to return to activity versus those who have not been released based on clinical impairment measures. Cohort study; Level of evidence, 3. A total of 98 patients were examined by the treating orthopaedic surgeon 6 months after ACL reconstruction for traditional impairment measures, including swelling, range of motion, strength, and graft stability. After this examination, all subjects completed the functional testing, consisting of the Functional Movement Screen (FMS) and the Lower Quarter Y Balance Test (YBT-LQ), by an experienced tester who was blinded to the results of the clinical examination. On the basis of the clinical examination, all patients were grouped as being ready to return to sport or not being ready. Performance on the functional tests, as measured by overall performance and side-to-side asymmetry, was compared between the 2 groups using independent-samples t tests (P < .05). No difference existed between the groups with regard to the descriptive characteristics, with the exception that the group not cleared was younger (21.0 ± 7.4 years) than the group that was cleared (25.6 ± 13.2 years). Performance on the YBT-LQ revealed that no differences existed between groups when examining reach symmetry for any of the reach directions. In addition, no differences were found between groups when looking at the average reach score normalized to limb length for either the surgical or nonsurgical leg. Patients in the cleared group exhibited a similar score on the FMS (12.7 ± 2.9) compared with the

  12. IEC 61850 Industrial Communication Standards under Test

    CERN Document Server

    Tilaro, F M; Gonzalez-Berges, M

    2014-01-01

    IEC-61850, as part of the International Electrotechnical Commission's (IEC) Technical Committee 57 (TC57), defines an international and standardized methodology to design electric power automation substations.

  13. Instrument Rating Practical Test Standards for Airplane, Helicopter, Airship

    Science.gov (United States)

    1994-10-01

    The Instrument Rating Practical Test Standards (PTS) book has : been published by the Federal Aviation Administration (FAA) to : establish the standards for the instrument rating practical test for : airplanes, helicopters, and airships. FAA inspecto...

  14. Identify Normative Values of Balance Tests Toward Neurological Assessment of Sports Related Concussion

    Directory of Open Access Journals (Sweden)

    Samaneh Eimanipure

    2012-04-01

    Full Text Available Objectives: Deterioration in postural control mechanisms is termed postural instability and results increased postural sway and many laboratory techniques and instruments are characterized by a wide range of neurological signs and symptoms to the medical management. Thus the current study designed to assess the reliability of commonly used clinical measures of balance and determined normal values. Also, the second purpose was scrutiny of effect age, length weight and body mass index (BMI on perform clinical balance tests. Methods: One hundred and thirty three participants (18-59 years, that have at least three time sports activity in one week, performed three timed tests: Time- up and Go (TUG, Tandem Gait (TG, and Walking on Balance Beam (WOBB on firm surface. Results: Reliability data were produced for each tests of motor performance. We found that the first performance of three trials was slower, and the relationship between some factors and these battery tests were examined. Means(±SD for each measure were averaged across three trials. Time to complete TG was 13.6±1.1s. TUG value was 6.9±1.03 and WOBB was 6.9±1.03s. Discussion: our results revealed that three clinical balance test batteries-TUG, TG and WOBB tests are the stability measures to assess of sports related concussion. Also, the results of current study appeared that the time to perform these tests was slower than the other studies.

  15. Normative Values of Balance Tests in Neurological Assessment of Sports Related Concussions

    Directory of Open Access Journals (Sweden)

    Samaneh Eemanipure

    2011-04-01

    Full Text Available Objectives: Deterioration in postural control mechanisms is termed postural instability and results increased postural sway and many laboratory techniques and instruments are characterized by a wide range of neurological signs and symptoms to the medical management. Thus the current study designed to assess the reliability of commonly used clinical measures of balance and determined normal values. Also, the second purpose was to evaluate the scrutiny of age, length weight and body mass index (BMI effects on performing clinical balance tests. Methods: One hundred and thirty three participants (18-59 years, that have at least three time sports activity in one week, performed three timed tests including Time-up and Go (TUG, Tandem Gait (TG, and Walking on Balance Beam (WOBB on firm surface. Results: Reliability data were produced for each tests of motor performance. We found that the first performance of three trials was slower, and the relationship between some factors and these battery tests were examined. Means(±SD for each measure were averaged across three trials. Time to complete TG was 13.6±1.1s. TUG value was 6.9±1.03 and WOBB was 6.9±1.03s. Discussion: our results revealed that three clinical balance test batteries-TUG, TG and WOBB tests are the stability measures to assess the sports related concussion. Also, the results of current study showed that the time to perform these tests was slower than the other studies.

  16. Interpreting Results from the Standardized UXO Test Sites

    National Research Council Canada - National Science Library

    May, Michael; Tuley, Michael

    2007-01-01

    ...) and the Environmental Security Technology Certification Program (ESCTP) to complete a detailed analysis of the results of testing carried out at the Standardized Unexploded Ordnance (UXO) Test Sites...

  17. Between-Day Reliability and Usefulness of a Fitness Testing Battery in Youth Sport Athletes: Reference Data for Practitioners

    Science.gov (United States)

    Sawczuk, Thomas; Jones, Ben; Scantlebury, Sean; Weakley, Jonathan; Read, Dale; Costello, Nessan; Darrall-Jones, Joshua David; Stokes, Keith; Till, Kevin

    2018-01-01

    This study aimed to evaluate the between-day reliability and usefulness of a fitness testing battery in a group of youth sport athletes. Fifty-nine youth sport athletes (age = 17.3 ± 0.7 years) undertook a fitness testing battery including the isometric mid-thigh pull, counter-movement jump, 5-40 m sprint splits, and the 5-0-5 change of direction…

  18. Standardized Testing and the Construction of Governable Persons

    Science.gov (United States)

    Graham, Cameron; Neu, Dean

    2004-01-01

    While debates over standardized testing are ubiquitous, there has been relatively little consideration of how today's standardized testing practices have arisen. The current study provides a chronology of standardized testing within Alberta, Canada. Starting from prior work by Foucault and others on "governmentality", we propose that the…

  19. Estimation of maximal oxygen uptake via submaximal exercise testing in sports, clinical, and home settings.

    Science.gov (United States)

    Sartor, Francesco; Vernillo, Gianluca; de Morree, Helma M; Bonomi, Alberto G; La Torre, Antonio; Kubis, Hans-Peter; Veicsteinas, Arsenio

    2013-09-01

    Assessment of the functional capacity of the cardiovascular system is essential in sports medicine. For athletes, the maximal oxygen uptake [Formula: see text] provides valuable information about their aerobic power. In the clinical setting, the (VO(2max)) provides important diagnostic and prognostic information in several clinical populations, such as patients with coronary artery disease or heart failure. Likewise, VO(2max) assessment can be very important to evaluate fitness in asymptomatic adults. Although direct determination of [VO(2max) is the most accurate method, it requires a maximal level of exertion, which brings a higher risk of adverse events in individuals with an intermediate to high risk of cardiovascular problems. Estimation of VO(2max) during submaximal exercise testing can offer a precious alternative. Over the past decades, many protocols have been developed for this purpose. The present review gives an overview of these submaximal protocols and aims to facilitate appropriate test selection in sports, clinical, and home settings. Several factors must be considered when selecting a protocol: (i) The population being tested and its specific needs in terms of safety, supervision, and accuracy and repeatability of the VO(2max) estimation. (ii) The parameters upon which the prediction is based (e.g. heart rate, power output, rating of perceived exertion [RPE]), as well as the need for additional clinically relevant parameters (e.g. blood pressure, ECG). (iii) The appropriate test modality that should meet the above-mentioned requirements should also be in line with the functional mobility of the target population, and depends on the available equipment. In the sports setting, high repeatability is crucial to track training-induced seasonal changes. In the clinical setting, special attention must be paid to the test modality, because multiple physiological parameters often need to be measured during test execution. When estimating VO(2max), one has

  20. Sport-specific endurance plank test for evaluation of global core muscle function.

    Science.gov (United States)

    Tong, Tom K; Wu, Shing; Nie, Jinlei

    2014-02-01

    To examine the validity and reliability of a sports-specific endurance plank test for the evaluation of global core muscle function. Repeated-measures study. Laboratory environment. Twenty-eight male and eight female young athletes. Surface electromyography (sEMG) of selected trunk flexors and extensors, and an intervention of pre-fatigue core workout were applied for test validation. Intraclass correlation coefficient (ICC), coefficient of variation (CV), and the measurement bias ratio */÷ ratio limits of agreement (LOA) were calculated to assess reliability and measurement error. Test validity was shown by the sEMG of selected core muscles, which indicated >50% increase in muscle activation during the test; and the definite discrimination of the ∼30% reduction in global core muscle endurance subsequent to a pre-fatigue core workout. For test-retest reliability, when the first attempt of three repeated trials was considered as familiarisation, the ICC was 0.99 (95% CI: 0.98-0.99), CV was 2.0 ± 1.56% and the measurement bias ratio */÷ ratio LOA was 0.99 */÷ 1.07. The findings suggest that the sport-specific endurance plank test is a valid, reliable and practical method for assessing global core muscle endurance in athletes given that at least one familiarisation trial takes place prior to measurement. Copyright © 2013 Elsevier Ltd. All rights reserved.

  1. Standard Guide for Testing Polymer Matrix Composite Materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 This guide summarizes the application of ASTM standard test methods (and other supporting standards) to continuous-fiber reinforced polymer matrix composite materials. The most commonly used or most applicable ASTM standards are included, emphasizing use of standards of Committee D30 on Composite Materials. 1.2 This guide does not cover all possible standards that could apply to polymer matrix composites and restricts discussion to the documented scope. Commonly used but non-standard industry extensions of test method scopes, such as application of static test methods to fatigue testing, are not discussed. A more complete summary of general composite testing standards, including non-ASTM test methods, is included in the Composite Materials Handbook (MIL-HDBK-17). Additional specific recommendations for testing textile (fabric, braided) composites are contained in Guide D6856. 1.3 This guide does not specify a system of measurement; the systems specified within each of the referenced standards shall appl...

  2. TESTING MOTOR SKILLS WITH CHILDREN AGED 4 AND 5 YEARS IN SPORT SCHOOL ”SPORTOMANIJA”

    Directory of Open Access Journals (Sweden)

    Vladimir Milošević

    2013-07-01

    Full Text Available Children aged 4 and 5 have great motor potential. Testing certain motor skills and measuring morphological characteristics are important steps in examining sport development of children. The subject of this paper is assessing motor skills and measuring morphological characteristics of students of sport school Sportomanija in Belgrade. The sample was made up of 16 male examinees aged 4 and 5. The battery of motor tests was composed of the following : deep reach (standing position, standing long jump, 20 metres running, 4x5 metres running, lying into sitting position in 20 seconds. Statistical analysis of results meant correlating results of motor tests and anthropometric measurment. The results show a statistically relevant negative correlation between body mass index (BMI and long jump results (r=-0,55, p<0,05. On the other hand, there is a high positive correlation (over r=0,70, p<0,05 between the results of motor tests: standing long jump, 20 metres running, 4x5 metres running, lying-sit in 20 seconds. These resultes are in the accordance with the similarity in the ways muscle strength is manifested under different conditions. Considering the correlation between these results provides the basis for testing the nature of this conection. Examining the connection between the anthropometric and motor scope during a targeted influence on a child’s body in sport school Sportomanija allows for gaining insight into some of the characteristics of the examinee’s age. Acquaitance with examinee’s model characteristics as well as structure of motor skills and longterm examining of anthropometric and motor scope are the basis of plan and action of the experts working with children and the young.

  3. Standard Testing Methods for Satellite Communication Systems

    OpenAIRE

    Stoner, Jerry

    2005-01-01

    University space programs continue to push the envelope of small satellite technology. Because budgets are often limited, and equipment costs can often be prohibitive to even well-established space programs, it becomes necessary to maximize the benefit/cost ratio of testing methods. Expensive testing is often not an option, nor is it realistic. Traditional methods such as anechoic chambers or antenna test ranges are not options, and testing the craft on the ground is not practical. Because of...

  4. Standard test methods for rockwell hardness of metallic materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 These test methods cover the determination of the Rockwell hardness and the Rockwell superficial hardness of metallic materials by the Rockwell indentation hardness principle. This standard provides the requirements for Rockwell hardness machines and the procedures for performing Rockwell hardness tests. 1.2 This standard includes additional requirements in annexes: Verification of Rockwell Hardness Testing Machines Annex A1 Rockwell Hardness Standardizing Machines Annex A2 Standardization of Rockwell Indenters Annex A3 Standardization of Rockwell Hardness Test Blocks Annex A4 Guidelines for Determining the Minimum Thickness of a Test Piece Annex A5 Hardness Value Corrections When Testing on Convex Cylindrical Surfaces Annex A6 1.3 This standard includes nonmandatory information in appendixes which relates to the Rockwell hardness test. List of ASTM Standards Giving Hardness Values Corresponding to Tensile Strength Appendix X1 Examples of Procedures for Determining Rockwell Hardness Uncertainty Appendix X...

  5. Standard test methods for rockwell hardness of metallic materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 These test methods cover the determination of the Rockwell hardness and the Rockwell superficial hardness of metallic materials by the Rockwell indentation hardness principle. This standard provides the requirements for Rockwell hardness machines and the procedures for performing Rockwell hardness tests. 1.2 This standard includes additional requirements in annexes: Verification of Rockwell Hardness Testing Machines Annex A1 Rockwell Hardness Standardizing Machines Annex A2 Standardization of Rockwell Indenters Annex A3 Standardization of Rockwell Hardness Test Blocks Annex A4 Guidelines for Determining the Minimum Thickness of a Test Piece Annex A5 Hardness Value Corrections When Testing on Convex Cylindrical Surfaces Annex A6 1.3 This standard includes nonmandatory information in appendixes which relates to the Rockwell hardness test. List of ASTM Standards Giving Hardness Values Corresponding to Tensile Strength Appendix X1 Examples of Procedures for Determining Rockwell Hardness Uncertainty Appendix X...

  6. Unique or double standard to aging in sports? Case of retired gymnasts

    Directory of Open Access Journals (Sweden)

    Mara Stan

    2017-12-01

    Full Text Available The study aims to capture a socially constructed analysis of gendered media representations on retired Romanian gymnasts. The theoretical input discusses gendered representations, body projects, discursive tactics applied to gender within the context of sports, kinetic performance and contributions extracted from feminist critical discourse analysis. The overall approach views desistance, resistance and conformity as inextricably intertwined concerning gendered representations of sports participation. Discursive cues from the 20 selected media articles anchor meaning as points of reference for connecting ideas to broader networks of significance within an integrative analytical framework. The analysis of empirical findings dwells on discursive strategies for conformity and othering, empowerment and victimization. Media portrays women gymnasts in the post-retirement phase as de-centring from competition and assuming supportive roles that are thought as more becoming, typically feminine practices, whereas men are represented as remaining strong and competitive. From a somatic culture perspective, male gymnasts act more as role models for successful aging, being portrayed as maintaining desirable body attributes such as grit, strength, energy and vitality. In exchange, female gymnasts remain ambassadors of sports and community participation to physical exercise, but are expected to display disturbing or debilitating somatic signs of aging as negative repercussion of high-performance gymnastics.

  7. Functional testing and return to sport following stabilization surgery for recurrent lateral patellar instability in competitive athletes.

    Science.gov (United States)

    Krych, Aaron J; O'Malley, Michael P; Johnson, Nick R; Mohan, Rohith; Hewett, Timothy E; Stuart, Michael J; Dahm, Diane L

    2018-03-01

    Medial patellofemoral ligament (MPFL) reconstruction and tibial tubercle osteotomy are commonly used to treat recurrent lateral patellar instability, yet there are limited available data on return to sport (RTS) following these procedures. The purpose of this study is to evaluate patient factors associated with excellent functional outcomes, including successful RTS, following surgical stabilization including MPFL reconstruction in competitive athletes with recurrent lateral patellar instability. Athletes undergoing primary MPFL reconstruction for recurrent lateral instability from 2005 to 2013 were identified at a single institution. Concomitant procedures, such as tibial tubercle osteotomy (TTO), were included. Patient demographic information, including BMI, gender, age, and pre-injury Tegner score, was recorded. In addition, radiographs were reviewed for pre-operative patellar height (Caton-Deschamps index) and trochlear dysplasia (Dejour classification). All patients underwent a standardized rehabilitation/post-operative protocol, with isokinetic strength and functional testing being performed at 6 months post-operatively. Final Tegner scores, RTS status, subjective instability ratings, and Kujala scores were collected at a minimum of 2 years. Chi-squared analysis for categorical variables and Wilcoxon rank-sum analysis for continuous variables were used to determine the relationship between the previously mentioned patient and knee characteristics with isokinetic data, RTS status, or Kujala scores. Thirty-nine athletes (23 male, 16 female) at a mean age of 17.5 ± 2.9 years (range, 13-26) underwent primary MPFL reconstruction (32 autografts, seven allografts) for recurrent patellar instability with a mean follow-up of 47.0 ± 16.4 months. Sixteen patients (41%) underwent concomitant tibial tubercle osteotomies. Isokinetic data collected at 6 months post-operatively demonstrated mean knee flexion and extension strength deficits of 15.8 ± 10.1% and

  8. Standard test for nuclear waste materials

    International Nuclear Information System (INIS)

    Nelson, R.D.; Mendel, J.E.; Turcotte, R.P.

    1981-01-01

    The function of the Materials Characterization Center (MCC) is to provide the standardized materials data base and supporting documentation to help ensure safe disposal of nuclear waste. The methods and data are being published in a Nuclear Waste Materials Handbook DOE/TIC 11400. (DG)

  9. Test System for Standard ALICE DCS Components

    CERN Document Server

    AUTHOR|(CDS)2160773

    2016-01-01

    Currently, the ALICE DCS project is supervising equipment installed in the ALICE experiment site at CERN. Hence, the aim of this project was to provide a test bench in the DCS lab, where a real equipment and software tools will be deployed. Using this test bench, test procedures which exercise the devices under the test in a configurable way and provide logging and trending of the acquired data were implemented. The setup was devised using the ALICE software framework and Siemens SCADA system WINCC OA, providing the same functionality as the systems installed in ALICE, and will be used for the commissioning of the new software and hardware, burn-in tests of new modules and log-term stability tests of ALICE hardware.

  10. The skin prick test - European standards

    NARCIS (Netherlands)

    Heinzerling, Lucie; Mari, Adriano; Bergmann, Karl-Christian; Bresciani, Megon; Burbach, Guido; Darsow, Ulf; Durham, Stephen; Fokkens, Wytske; Gjomarkaj, Mark; Haahtela, Tari; Bom, Ana Todo; Wöhrl, Stefan; Maibach, Howard; Lockey, Richard

    2013-01-01

    Skin prick testing is an essential test procedure to confirm sensitization in IgE-mediated allergic disease in subjects with rhinoconjunctivitis, asthma, urticaria, anapylaxis, atopic eczema and food and drug allergy. This manuscript reviews the available evidence including Medline and Embase

  11. 42 CFR 493.1281 - Standard: Comparison of test results.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Comparison of test results. 493.1281 Section 493.1281 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Quality System for Nonwaived Testing Analytic Systems § 493.1281 Standard:...

  12. An alternative to the balance error scoring system: using a low-cost balance board to improve the validity/reliability of sports-related concussion balance testing.

    Science.gov (United States)

    Chang, Jasper O; Levy, Susan S; Seay, Seth W; Goble, Daniel J

    2014-05-01

    Recent guidelines advocate sports medicine professionals to use balance tests to assess sensorimotor status in the management of concussions. The present study sought to determine whether a low-cost balance board could provide a valid, reliable, and objective means of performing this balance testing. Criterion validity testing relative to a gold standard and 7 day test-retest reliability. University biomechanics laboratory. Thirty healthy young adults. Balance ability was assessed on 2 days separated by 1 week using (1) a gold standard measure (ie, scientific grade force plate), (2) a low-cost Nintendo Wii Balance Board (WBB), and (3) the Balance Error Scoring System (BESS). Validity of the WBB center of pressure path length and BESS scores were determined relative to the force plate data. Test-retest reliability was established based on intraclass correlation coefficients. Composite scores for the WBB had excellent validity (r = 0.99) and test-retest reliability (R = 0.88). Both the validity (r = 0.10-0.52) and test-retest reliability (r = 0.61-0.78) were lower for the BESS. These findings demonstrate that a low-cost balance board can provide improved balance testing accuracy/reliability compared with the BESS. This approach provides a potentially more valid/reliable, yet affordable, means of assessing sports-related concussion compared with current methods.

  13. 14 CFR 61.405 - What tests do I have to take to obtain a flight instructor certificate with a sport pilot rating?

    Science.gov (United States)

    2010-01-01

    ... flight instructor certificate with a sport pilot rating? 61.405 Section 61.405 Aeronautics and Space..., FLIGHT INSTRUCTORS, AND GROUND INSTRUCTORS Flight Instructors With a Sport Pilot Rating § 61.405 What tests do I have to take to obtain a flight instructor certificate with a sport pilot rating? To obtain a...

  14. Who is more skilful? Doping and its implication on the validity, morality and significance of the sporting test

    DEFF Research Database (Denmark)

    Christiansen, Ask Vest; Møller, Rasmus Bysted

    2016-01-01

    of ‘dubious means’. As a supplement to Heinilä, we revisit American sports historian John Hoberman’s writings on sport and technology. Then we discuss what function equality and fairness have in sport and what separates legitimate form illegitimate ways of enhancing performance. We proceed by discussing......In this article, we explore if and in what ways doping can be regarded as a challenge to the validity, morality and significance of the sporting test. We start out by examining Kalevi Heinilä’s analysis of the logic of elite sport, which shows how the ‘spiral of competition’ leads to the use...... the line of argumentation set forth by philosopher Torbjörn Tännsjö on how our admiration of sporting superiority based on natural talent or ‘birth luck’ is immoral. We analyse his argument in favour of eliminating the significance of meritless luck in sport by lifting the ban on doping and argue that its...

  15. A novel approach to sports concussion assessment: Computerized multilimb reaction times and balance control testing.

    Science.gov (United States)

    Vartiainen, Matti V; Holm, Anu; Lukander, Jani; Lukander, Kristian; Koskinen, Sanna; Bornstein, Robert; Hokkanen, Laura

    2016-01-01

    Mild traumatic brain injuries (MTBI) or concussions often result in problems with attention, executive functions, and motor control. For better identification of these diverse problems, novel approaches integrating tests of cognitive and motor functioning are needed. The aim was to characterize minor changes in motor and cognitive performance after sports-related concussions with a novel test battery, including balance tests and a computerized multilimb reaction time test. The cognitive demands of the battery gradually increase from a simple stimulus response to a complex task requiring executive attention. A total of 113 male ice hockey players (mean age = 24.6 years, SD = 5.7) were assessed before a season. During the season, nine concussed players were retested within 36 hours, four to six days after the concussion, and after the season. A control group of seven nonconcussed players from the same pool of players with comparable demographics were retested after the season. Performance was measured using a balance test and the Motor Cognitive Test battery (MotCoTe) with multilimb responses in simple reaction, choice reaction, inhibition, and conflict resolution conditions. The performance of the concussed group declined at the postconcussion assessment compared to both the baseline measurement and the nonconcussed controls. Significant changes were observed in the concussed group for the multilimb choice reaction and inhibition tests. Tapping and balance showed a similar trend, but no statistically significant difference in performance. In sports-related concussions, complex motor tests can be valuable additions in assessing the outcome and recovery. In the current study, using subtasks with varying cognitive demands, it was shown that while simple motor performance was largely unaffected, the more complex tasks induced impaired reaction times for the concussed subjects. The increased reaction times may reflect the disruption of complex and integrative cognitive

  16. Cancer Screening: How Do Screening Tests Become Standard Tests?

    Science.gov (United States)

    ... Colonoscopy for colorectal cancer . Mammograms for breast cancer . Pap tests (Pap smears) for cervical cancer . Different types of ... follow a group of women who have regular Pap tests, and divide them into those who test positive ...

  17. Balance Assessment in Sports-Related Concussion: Evaluating Test-Retest Reliability of the Equilibrate System.

    Science.gov (United States)

    Odom, Mitchell J; Lee, Young M; Zuckerman, Scott L; Apple, Rachel P; Germanos, Theodore; Solomon, Gary S; Sills, Allen K

    2016-01-01

    This study evaluated the test-retest reliability of a novel computer-based, portable balance assessment tool, the Equilibrate System (ES), used to diagnose sports-related concussion. Twenty-seven students participated in ES testing consisting of three sessions over 4 weeks. The modified Balance Error Scoring System was performed. For each participant, test-retest reliability was established using the intraclass correlation coefficient (ICC). The ES test-retest reliability from baseline to week 2 produced an ICC value of 0.495 (95% CI, 0.123-0.745). Week 2 testing produced ICC values of 0.602 (95% CI, 0.279-0.803) and 0.610 (95% CI, 0.299-0.804), respectively. All other single measures test-retest reliability values produced poor ICC values. Same-day ES testing showed fair to good test-retest reliability while interweek measures displayed poor to fair test-retest reliability. Testing conditions should be controlled when using computerized balance assessment methods. ES testing should only be used as a part of a comprehensive assessment.

  18. SEDIMENT TOXICITY ASSESSMENT: COMPARISON OF STANDARD AND NEW TESTING DESIGNS

    Science.gov (United States)

    Standard methods of sediment toxicity testing are fairly well accepted; however, as with all else, evolution of these methods is inevitable. We compared a standard ASTM 10-day amphipod toxicity testing method with smaller, 48- and 96-h test methods using very toxic and reference ...

  19. A call for policy guidance on psychometric testing in doping control in sport.

    Science.gov (United States)

    Petróczi, Andrea; Backhouse, Susan H; Barkoukis, Vassilis; Brand, Ralf; Elbe, Anne-Marie; Lazuras, Lambros; Lucidi, Fabio

    2015-11-01

    One of the fundamental challenges in anti-doping is identifying athletes who use, or are at risk of using, prohibited performance enhancing substances. The growing trend to employ a forensic approach to doping control aims to integrate information from social sciences (e.g., psychology of doping) into organised intelligence to protect clean sport. Beyond the foreseeable consequences of a positive identification as a doping user, this task is further complicated by the discrepancy between what constitutes a doping offence in the World Anti-Doping Code and operationalized in doping research. Whilst psychology plays an important role in developing our understanding of doping behaviour in order to inform intervention and prevention, its contribution to the array of doping diagnostic tools is still in its infancy. In both research and forensic settings, we must acknowledge that (1) socially desirable responding confounds self-reported psychometric test results and (2) that the cognitive complexity surrounding test performance means that the response-time based measures and the lie detector tests for revealing concealed life-events (e.g., doping use) are prone to produce false or non-interpretable outcomes in field settings. Differences in social-cognitive characteristics of doping behaviour that are tested at group level (doping users vs. non-users) cannot be extrapolated to individuals; nor these psychometric measures used for individual diagnostics. In this paper, we present a position statement calling for policy guidance on appropriate use of psychometric assessments in the pursuit of clean sport. We argue that, to date, both self-reported and response-time based psychometric tests for doping have been designed, tested and validated to explore how athletes feel and think about doping in order to develop a better understanding of doping behaviour, not to establish evidence for doping. A false 'positive' psychological profile for doping affects not only the individual

  20. Impact of the emergence of designer drugs upon sports doping testing.

    Science.gov (United States)

    Teale, P; Scarth, J; Hudson, S

    2012-01-01

    Historically, dope-testing methods have been developed to target specific and known threats to the integrity of sport. Traditionally, the source of new analytical targets for which testing was required were derived almost exclusively from the pharmaceutical industry. More recently, the emergence of designer drugs, such as tetrahydrogestrinone that are specifically intended to evade detection, or novel chemicals intended to circumvent laws controlling the sale and distribution of recreational drugs, such as anabolic steroids, stimulants and cannabinoids, have become a significant issue. In this review, we shall consider the emergence of designer drugs and the response of dope-testing laboratories to these new threats, in particular developments in analytical methods, instrumentation and research intended to detect their abuse, and we consider the likely future impact of these approaches.

  1. Field of Genes: An Investigation of Sports-Related Genetic Testing

    Directory of Open Access Journals (Sweden)

    Jennifer K. Wagner

    2012-09-01

    Full Text Available Sports-related genetic testing is a sector of the diverse direct-to-consumer (DTC industry that has not yet been examined thoroughly by academic scholars. A systematic search was used to identify companies in this sector and content analysis of online information was performed. More than a dozen companies were identified. Marketing practices observed generally did not target parents for child testing, and marketing images were mild compared to images used in popular media. Information was provided at a high reading level (industry-wide Flesh-Kincaid Grade Levels > 11. While ~75% of companies provide privacy policies and terms of service prior to purchase and ~40% provide scientific citations for their tests,

  2. Field of Genes: An Investigation of Sports-Related Genetic Testing

    Science.gov (United States)

    Wagner, Jennifer K.; Royal, Charmaine D.

    2012-01-01

    Sports-related genetic testing is a sector of the diverse direct-to-consumer (DTC) industry that has not yet been examined thoroughly by academic scholars. A systematic search was used to identify companies in this sector and content analysis of online information was performed. More than a dozen companies were identified. Marketing practices observed generally did not target parents for child testing, and marketing images were mild compared to images used in popular media. Information was provided at a high reading level (industry-wide Flesh-Kincaid Grade Levels > 11). While ~75% of companies provide privacy policies and terms of service prior to purchase and ~40% provide scientific citations for their tests, e-commerce generally may adequately protect DTC genetics consumers without new federal legislation or regulation. PMID:25562204

  3. Standard guide for fretting fatigue testing

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This guide defines terminology and covers general requirements for conducting fretting fatigue tests and reporting the results. It describes the general types of fretting fatigue tests and provides some suggestions on developing and conducting fretting fatigue test programs. 1.2 Fretting fatigue tests are designed to determine the effects of mechanical and environmental parameters on the fretting fatigue behavior of metallic materials. This guide is not intended to establish preference of one apparatus or specimen design over others, but will establish guidelines for adherence in the design, calibration, and use of fretting fatigue apparatus and recommend the means to collect, record, and reporting of the data. 1.3 The number of cycles to form a fretting fatigue crack is dependent on both the material of the fatigue specimen and fretting pad, the geometry of contact between the two, and the method by which the loading and displacement are imposed. Similar to wear behavior of materials, it is important t...

  4. Towards a standardization of biomethane potential tests

    DEFF Research Database (Denmark)

    Holliger, C.; Alves, M.; Andrade, D.

    2016-01-01

    Production of biogas fromdifferent organic materials is a most interesting source of renewable energy. The biomethane potential (BMP) of these materials has to be determined to get insight in design parameters for anaerobic digesters. Although several norms and guidelines for BMP tests exist, int...

  5. HISTORY AND EVOLUTION OF STANDARDIZED TESTING – A LITERATURE REVIEW

    OpenAIRE

    Dr. Syeda Rakhshanda Kaukab; Syeda Mehrunnisa

    2017-01-01

    This paper has been written with the intent of providing the history and evolution of the modern standardized testing while also highlighting the importance, pros and cons of standardized testing. In Pakistan, recently the higher education institution has established institute for development and implementation of standardized testing for admissions to the universities. It is for the first time that this is being introduced. Therefore, it appears in order that first the global development and...

  6. Standard test method for creep-fatigue testing

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method covers the determination of mechanical properties pertaining to creep-fatigue deformation or crack formation in nominally homogeneous materials, or both by the use of test specimens subjected to uniaxial forces under isothermal conditions. It concerns fatigue testing at strain rates or with cycles involving sufficiently long hold times to be responsible for the cyclic deformation response and cycles to crack formation to be affected by creep (and oxidation). It is intended as a test method for fatigue testing performed in support of such activities as materials research and development, mechanical design, process and quality control, product performance, and failure analysis. The cyclic conditions responsible for creep-fatigue deformation and cracking vary with material and with temperature for a given material. 1.2 The use of this test method is limited to specimens and does not cover testing of full-scale components, structures, or consumer products. 1.3 This test method is primarily ...

  7. Historical Evolution of NASA Standard Materials Testing with Hypergolic Propellants and Ammonia (NASA Standard 6001 Test 15)

    Science.gov (United States)

    Greene, Benjamin; McClure, Mark B.

    2012-01-01

    The NASA Johnson Space Center White Sands Test Facility (WSTF) has performed testing of hazardous and reactive aerospace fluids, including hypergolic propellants, with materials since the 1960s with the Apollo program. Amongst other test activities, Test 15 is a NASA standard test for evaluating the reactivity of materials with selected aerospace fluids, in particular hydrazine, monomethylhydrazine, uns-dimethylhydrazine, Aerozine 50, dinitrogen tetroxide oxidizers, and ammonia. This manuscript provides an overview of the history of Test 15 over a timeline ranging from prior to its development and first implementation as a NASA standard test in 1974 to its current refinement. Precursor documents to NASA standard tests, as they are currently known, are reviewed. A related supplementary test, international standardization, and enhancements to Test 15 are also discussed. Because WSTF was instrumental in the development and implementation of Test 15, WSTF experience and practices are referred to in this manuscript.

  8. Traditional vs. Sport-Specific Vertical Jump Tests: Reliability, Validity, and Relationship With the Legs Strength and Sprint Performance in Adult and Teen Soccer and Basketball Players.

    Science.gov (United States)

    Rodríguez-Rosell, David; Mora-Custodio, Ricardo; Franco-Márquez, Felipe; Yáñez-García, Juan M; González-Badillo, Juan J

    2017-01-01

    Rodríguez-Rosell, D, Mora-Custodio, R, Franco-Márquez, F, Yáñez-García, JM, González-Badillo, JJ. Traditional vs. sport-specific vertical jump tests: reliability, validity, and relationship with the legs strength and sprint performance in adult and teen soccer and basketball players. J Strength Cond Res 31(1): 196-206, 2017-The vertical jump is considered an essential motor skill in many team sports. Many protocols have been used to assess vertical jump ability. However, controversy regarding test selection still exists based on the reliability and specificity of the tests. The main aim of this study was to analyze the reliability and validity of 2 standardized (countermovement jump [CMJ] and Abalakov jump [AJ]) and 2 sport-specific (run-up with 2 [2-LEGS] or 1 leg [1-LEG] take-off jump) vertical jump tests, and their usefulness as predictors of sprint and strength performance for soccer (n = 127) and basketball (n = 59) players in 3 different categories (Under-15, Under-18, and Adults). Three attempts for each of the 4 jump tests were recorded. Twenty-meter sprint time and estimated 1 repetition maximum in full squat were also evaluated. All jump tests showed high intraclass correlation coefficients (0.969-0.995) and low coefficients of variation (1.54-4.82%), although 1-LEG was the jump test with the lowest absolute and relative reliability. All selected jump tests were significantly correlated (r = 0.580-0.983). Factor analysis resulted in the extraction of one principal component, which explained 82.90-95.79% of the variance of all jump tests. The 1-LEG test showed the lowest associations with sprint and strength performance. The results of this study suggest that CMJ and AJ are the most reliable tests for the estimation of explosive force in soccer and basketball players in different age categories.

  9. Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1985-01-01

    1.1 This test method covers a procedure for a laboratory test for performing an initial evaluation (screening) of nonmetallic seal materials by immersion in a simulated geothermal test fluid. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 6 and 11.7.

  10. Sports Physicals

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Sports Physicals KidsHealth / For Teens / Sports Physicals What's in ... beginning of your sports season. What Is a Sports Physical? In the sports medicine field, the sports ...

  11. DOE standard: Quality assurance inspection and testing of HEPA filters

    International Nuclear Information System (INIS)

    1999-02-01

    This standard establishes essential elements for the quality assurance inspection and testing of HEPA filters by US Department of Energy (DOE)-accepted Filter Test Facilities (FTF). The standard specifies HEPA filter quality assurance inspection and testing practices established in DOE-STD-3022-98, DOE HEPA Filter Test Program, and provides a basis for the preparation of written operating procedures for primary FTF functions

  12. A test of processing efficiency theory in a team sport context.

    Science.gov (United States)

    Smith, N C; Bellamy, M; Collins, D J; Newell, D

    2001-05-01

    In this study, we tested some key postulates of Eysenck and Calvo's processing efficiency theory in a team sport. The participants were 12 elite male volleyball players who were followed throughout the course of a competitive season. Self-report measures of pre-match and in-game cognitive anxiety and mental effort were collected in groups of players high and low in dispositional anxiety. Player performance was determined from the statistical analysis of match-play. Sets were classified according to the point spread separating the two teams into one of three levels of criticality. Game momentum was also analysed to determine its influence on in-game state anxiety. Significant differences in in-game cognitive anxiety were apparent between high and low trait anxiety groups. An interaction between anxiety grouping and momentum condition was also evident in cognitive anxiety. Differences in set criticality were reflected in significant elevations in mental effort, an effect more pronounced in dispositionally high anxious performers. Consistent with the predictions of processing efficiency theory, mental effort ratings were higher in high trait-anxious players in settings where their performance was equivalent to that of low trait-anxious performers. The usefulness of processing efficiency theory as an explanatory framework in sport anxiety research is discussed in the light of these findings.

  13. Caster Semenya and the "Question of Too": Sex Testing in Elite Women's Sport and the Issue of Advantage

    Science.gov (United States)

    Schultz, Jaime

    2011-01-01

    In 2009, the International Association of Athletics Federations (IAAF) forced Caster Semenya, the women's 800-meter champion from South Africa, to submit to "gender verification tests." It took eleven months for officials to review the results of those tests and, ultimately, permit her compete again. Sports organizations, including the IAAF and…

  14. Issues in Standardizing Psychometric Tests for Children Who Are Blind.

    Science.gov (United States)

    Hull, T.; Mason, H.

    1993-01-01

    This article discusses issues and difficulties encountered in efforts at the University of Birmingham (England) to standardize a new psychometric assessment tool, a tactile speed-of-information-processing test for children with blindness. The problem of defining the population on which the test is standardized is seen as particularly difficult.…

  15. Gold Standard Testing of Motion Based Tracking Systems

    Science.gov (United States)

    2017-03-15

    AFRL-RH-WP-TR-2017-0032 GOLD STANDARD TESTING OF MOTION BASED TRACKING SYSTEMS Joshua Hagen Human Signatures Branch Human-Centered ISR Division...DD-MM-YY) 2. REPORT TYPE 3. DATES COVERED (From - To) 15 03 17 Interim Report June 2016 – March 2017 4. TITLE AND SUBTITLE Gold Standard Testing of...systems against a ‘ Gold Standard ’ on-field measurement system for human physiological performance monitoring. Data shows that the accuracy of the

  16. Hearing Aid–Related Standards and Test Systems

    Science.gov (United States)

    Ravn, Gert; Preves, David

    2015-01-01

    Many documents describe standardized methods and standard equipment requirements in the field of audiology and hearing aids. These standards will ensure a uniform level and a high quality of both the methods and equipment used in audiological work. The standards create the basis for measuring performance in a reproducible manner and independent from how and when and by whom parameters have been measured. This article explains, and focuses on, relevant acoustic and electromagnetic compatibility parameters and describes several test systems available. PMID:27516709

  17. Standard test methods for bend testing of material for ductility

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 These test methods cover bend testing for ductility of materials. Included in the procedures are four conditions of constraint on the bent portion of the specimen; a guided-bend test using a mandrel or plunger of defined dimensions to force the mid-length of the specimen between two supports separated by a defined space; a semi-guided bend test in which the specimen is bent, while in contact with a mandrel, through a specified angle or to a specified inside radius (r) of curvature, measured while under the bending force; a free-bend test in which the ends of the specimen are brought toward each other, but in which no transverse force is applied to the bend itself and there is no contact of the concave inside surface of the bend with other material; a bend and flatten test, in which a transverse force is applied to the bend such that the legs make contact with each other over the length of the specimen. 1.2 After bending, the convex surface of the bend is examined for evidence of a crack or surface irregu...

  18. Direct-to-consumer genetic testing for predicting sports performance and talent identification: Consensus statement

    Science.gov (United States)

    Webborn, Nick; Williams, Alun; McNamee, Mike; Bouchard, Claude; Pitsiladis, Yannis; Ahmetov, Ildus; Ashley, Euan; Byrne, Nuala; Camporesi, Silvia; Collins, Malcolm; Dijkstra, Paul; Eynon, Nir; Fuku, Noriyuki; Garton, Fleur C; Hoppe, Nils; Holm, Søren; Kaye, Jane; Klissouras, Vassilis; Lucia, Alejandro; Maase, Kamiel; Moran, Colin; North, Kathryn N; Pigozzi, Fabio; Wang, Guan

    2015-01-01

    The general consensus among sport and exercise genetics researchers is that genetic tests have no role to play in talent identification or the individualised prescription of training to maximise performance. Despite the lack of evidence, recent years have witnessed the rise of an emerging market of direct-to-consumer marketing (DTC) tests that claim to be able to identify children's athletic talents. Targeted consumers include mainly coaches and parents. There is concern among the scientific community that the current level of knowledge is being misrepresented for commercial purposes. There remains a lack of universally accepted guidelines and legislation for DTC testing in relation to all forms of genetic testing and not just for talent identification. There is concern over the lack of clarity of information over which specific genes or variants are being tested and the almost universal lack of appropriate genetic counselling for the interpretation of the genetic data to consumers. Furthermore independent studies have identified issues relating to quality control by DTC laboratories with different results being reported from samples from the same individual. Consequently, in the current state of knowledge, no child or young athlete should be exposed to DTC genetic testing to define or alter training or for talent identification aimed at selecting gifted children or adolescents. Large scale collaborative projects, may help to develop a stronger scientific foundation on these issues in the future. PMID:26582191

  19. Standard test method for creep-fatigue crack growth testing

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This test method covers the determination of creep-fatigue crack growth properties of nominally homogeneous materials by use of pre-cracked compact type, C(T), test specimens subjected to uniaxial cyclic forces. It concerns fatigue cycling with sufficiently long loading/unloading rates or hold-times, or both, to cause creep deformation at the crack tip and the creep deformation be responsible for enhanced crack growth per loading cycle. It is intended as a guide for creep-fatigue testing performed in support of such activities as materials research and development, mechanical design, process and quality control, product performance, and failure analysis. Therefore, this method requires testing of at least two specimens that yield overlapping crack growth rate data. The cyclic conditions responsible for creep-fatigue deformation and enhanced crack growth vary with material and with temperature for a given material. The effects of environment such as time-dependent oxidation in enhancing the crack growth ra...

  20. Standard test method for liquid impingement erosion using rotating apparatus

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This test method covers tests in which solid specimens are eroded or otherwise damaged by repeated discrete impacts of liquid drops or jets. Among the collateral forms of damage considered are degradation of optical properties of window materials, and penetration, separation, or destruction of coatings. The objective of the tests may be to determine the resistance to erosion or other damage of the materials or coatings under test, or to investigate the damage mechanisms and the effect of test variables. Because of the specialized nature of these tests and the desire in many cases to simulate to some degree the expected service environment, the specification of a standard apparatus is not deemed practicable. This test method gives guidance in setting up a test, and specifies test and analysis procedures and reporting requirements that can be followed even with quite widely differing materials, test facilities, and test conditions. It also provides a standardized scale of erosion resistance numbers applicab...

  1. Standard guide for conducting exfoliation corrosion tests in aluminum alloys

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1992-01-01

    1.1 This guide differs from the usual ASTM standard in that it does not address a specific test. Rather, it is an introductory guide for new users of other standard exfoliation test methods, (see Terminology G 15 for definition of exfoliation). 1.2 This guide covers aspects of specimen preparation, exposure, inspection, and evaluation for conducting exfoliation tests on aluminum alloys in both laboratory accelerated environments and in natural, outdoor atmospheres. The intent is to clarify any gaps in existent test methods. 1.3 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  2. Reliability of a Cycle Ergometer Peak Power Test in Running-based Team Sport Athletes: A Technical Report.

    Science.gov (United States)

    Wehbe, George M; Gabbett, Tim J; Hartwig, Timothy B; Mclellan, Christopher P

    2015-07-01

    Given the importance of ensuring athletes train and compete in a nonfatigued state, reliable tests are required to regularly monitor fatigue. The purpose of this study was to investigate the reliability of a cycle ergometer to measure peak power during short maximal sprint cycle efforts in running-based team sport athletes. Fourteen professional male Australian rules footballers performed a sprint cycle protocol during 3 separate trials, with each trial separated by 7 days. The protocol consisted of a standardized warm-up, a maximal 6-second sprint cycle effort, a 1-minute active recovery, and a second maximal 6-second sprint cycle effort. Peak power was recorded as the highest power output of the 2 sprint cycle efforts. Absolute peak power (mean ± SD) was 1502 ± 202, 1498 ± 191, and 1495 ± 210 W for trials 1, 2, and 3, respectively. The mean coefficient of variation, intraclass correlation coefficient, and SE of measurement for peak power between trials was 3.0% (90% confidence intervals [CIs] = 2.5-3.8%), 0.96 (90% CIs = 0.91-0.98), and 39 W, respectively. The smallest worthwhile change for relative peak power was 6.0%, which equated to 1.03 W·kg⁻¹. The cycle ergometer sprint test protocol described in this study is highly reliable in elite Australian rules footballers and can be used to track meaningful changes in performance over time, making it a potentially useful fatigue-monitoring tool.

  3. The nutrition for sport knowledge questionnaire (NSKQ): development and validation using classical test theory and Rasch analysis.

    Science.gov (United States)

    Trakman, Gina Louise; Forsyth, Adrienne; Hoye, Russell; Belski, Regina

    2017-01-01

    Appropriate dietary intake can have a significant influence on athletic performance. There is a growing consensus on sports nutrition and professionals working with athletes often provide dietary education. However, due to the limitations of existing sports nutrition knowledge questionnaires, previous reports of athletes' nutrition knowledge may be inaccurate. An updated questionnaire has been developed based on a recent review of sports nutrition guidelines. The tool has been validated using a robust methodology that incorporates relevant techniques from classical test theory (CTT) and Item response theory (IRT), namely, Rasch analysis. The final questionnaire has 89 questions and six sub-sections (weight management, macronutrients, micronutrients, sports nutrition, supplements, and alcohol). The content and face validity of the tool have been confirmed based on feedback from expert sports dietitians and university sports students, respectively. The internal reliability of the questionnaire as a whole is high (KR = 0.88), and most sub-sections achieved an acceptable internal reliability. Construct validity has been confirmed, with an independent T-test revealing a significant ( p  < 0.001) difference in knowledge scores of nutrition (64 ± 16%) and non-nutrition students (51 ± 19%). Test-retest reliability has been assured, with a strong correlation ( r  = 0.92, p  < 0.001) between individuals' scores on two attempts of the test, 10 days to 2 weeks apart. Three of the sub-sections fit the Rasch Unidimensional Model. The final version of the questionnaire represents a significant improvement over previous tools. Each nutrition sub-section is unidimensional, and therefore researchers and practitioners can use these individually, as required. Use of the questionnaire will allow researchers to draw conclusions about the effectiveness of nutrition education programs, and differences in knowledge across athletes of varying ages, genders, and athletic

  4. Slovak Office of Standards, Metrology and Testing. Annual Report 2001

    International Nuclear Information System (INIS)

    2002-01-01

    A brief account of activities carried out by the Slovak Office of Standards, Metrology and Testing of the Slovak Republic in 2001 is presented. These activities are reported under the headings: (1) Introduction by the President of the Slovak Office of Standards, Metrology and Testing; (2) The Vice-president's Unit Standardization and Quality; (3) The President's Office; (4) Chief Inspector Department; (5) Legislative-juridical Department; (6) Department of Economy; (7) Department of International Co-operation; (8) Department of European Integration; (9) Department of Metrology; (10) Department of Testing; (11) Department of the Cyclotron Centre SR; (12) Slovak Institute of Metrology; (13) Slovak Standards Institution; (14) Slovak Metrology Inspectorate; (15) Slovak Legal Metrology; (16) Measuring Techniques - Technocentre - MTT; Abbreviations; (17) Technical Testing Institute Piestany; (18) Testing Institute of Transport and Earthmoving Machinery - SUDST

  5. Cognitive Fatigue Influences Students’ Performance on Standardized Tests

    DEFF Research Database (Denmark)

    Sievertsen, Hans Henrik; Gino, Francesca; Piovesan, Marco

    2016-01-01

    We identify one potential source of bias that influences children’s performance on standardized tests and that is predictable based on psychological theory: the time at which students take the test. Using test data for all children attending Danish public schools between school years 2009...

  6. Eight Ways to Support Students during Standardized Tests. Classroom Tips

    Science.gov (United States)

    Higdon, Julie; Holcomb, Linda Laine

    2012-01-01

    Standardized testing time often creates a nervous atmosphere in classrooms. In past years one of the authors joined a chorus of teachers singing her own woes about the infamous test. She increased her daily caffeine intake, lost sleep, and became a nervous, crazed teacher who had turned her classroom into a test prep center. Her aha moment came…

  7. Contributions of neuroimaging, balance testing, electrophysiology and blood markers to the assessment of sport-related concussion.

    Science.gov (United States)

    Davis, G A; Iverson, G L; Guskiewicz, K M; Ptito, A; Johnston, K M

    2009-05-01

    To review the diagnostic tests and investigations used in the management of sports concussion, in the adult and paediatric populations, to (a) monitor the severity of symptoms and deficits, (b) track recovery and (c) advance knowledge relating to the natural history and neurobiology of the injury. Qualitative literature review of the neuroimaging, balance testing, electrophysiology, blood marker and concussion literature. PubMed and Medline databases were reviewed for investigations used in the management of adult and paediatric concussion, including structural imaging (computerised tomography, magnetic resonance imaging, diffusion tensor imaging), functional imaging (single photon emission computerised tomography, positron emission tomography, functional magnetic resonance imaging), spectroscopy (magnetic resonance spectroscopy, near infrared spectroscopy), balance testing (Balance Error Scoring System, Sensory Organization Test, gait testing, virtual reality), electrophysiological tests (electroencephalography, evoked potentials, event related potentials, magnetoencephalography, heart rate variability), genetics (apolipoprotein E4, channelopathies) and blood markers (S100, neuron-specific enolase, cleaved Tau protein, glutamate). For the adult and paediatric populations, each test has been classified as being: (1) clinically useful, (2) a research tool only or (3) not useful in sports-related concussion. The current status of the diagnostic tests and investigations is analysed, and potential directions for future research are provided. Currently, all tests and investigations, with the exception of clinical balance testing, remain experimental. There is accumulating research, however, that shows promise for the future clinical application of functional magnetic resonance imaging in sport concussion assessment and management.

  8. Pad-weighing test performed with standardized bladder volume

    DEFF Research Database (Denmark)

    Lose, G; Rosenkilde, P; Gammelgaard, J

    1988-01-01

    The result of the one-hour pad-weighing test proposed by the International Continence Society has been demonstrated to depend on the urine load during the test. To increase reproducibility of the pad-weighing test by minimizing the influence of variation in urine load the test was done...... with a standardized bladder volume (50% of the cystometric bladder capacity). Twenty-five female patients with stress or mixed incontinence underwent two separate tests. Test-retest results were highly correlated (r = 0.97, p less than 0.001). Nonetheless, analysis of test-retest differences revealed a variation up...... to +/- 24 g between two tests. It is concluded that this setup (i.e., standardized bladder volume) of the one-hour pad-weighing test allows for a more reliable assessment of urinary incontinence for quantitative purposes....

  9. A method of statistical analysis in the field of sports science when assumptions of parametric tests are not violated

    OpenAIRE

    Sandurska, Elżbieta; Szulc, Aleksandra

    2016-01-01

    Sandurska Elżbieta, Szulc Aleksandra. A method of statistical analysis in the field of sports science when assumptions of parametric tests are not violated. Journal of Education Health and Sport. 2016;6(13):275-287. eISSN 2391-8306. DOI http://dx.doi.org/10.5281/zenodo.293762 http://ojs.ukw.edu.pl/index.php/johs/article/view/4278 The journal has had 7 points in Ministry of Science and Higher Education parametric evaluation. Part B item 754 (09.12.2016). 754 Journal...

  10. Direct-to-consumer genetic testing for predicting sports performance and talent identification: Consensus statement.

    Science.gov (United States)

    Webborn, Nick; Williams, Alun; McNamee, Mike; Bouchard, Claude; Pitsiladis, Yannis; Ahmetov, Ildus; Ashley, Euan; Byrne, Nuala; Camporesi, Silvia; Collins, Malcolm; Dijkstra, Paul; Eynon, Nir; Fuku, Noriyuki; Garton, Fleur C; Hoppe, Nils; Holm, Søren; Kaye, Jane; Klissouras, Vassilis; Lucia, Alejandro; Maase, Kamiel; Moran, Colin; North, Kathryn N; Pigozzi, Fabio; Wang, Guan

    2015-12-01

    The general consensus among sport and exercise genetics researchers is that genetic tests have no role to play in talent identification or the individualised prescription of training to maximise performance. Despite the lack of evidence, recent years have witnessed the rise of an emerging market of direct-to-consumer marketing (DTC) tests that claim to be able to identify children's athletic talents. Targeted consumers include mainly coaches and parents. There is concern among the scientific community that the current level of knowledge is being misrepresented for commercial purposes. There remains a lack of universally accepted guidelines and legislation for DTC testing in relation to all forms of genetic testing and not just for talent identification. There is concern over the lack of clarity of information over which specific genes or variants are being tested and the almost universal lack of appropriate genetic counselling for the interpretation of the genetic data to consumers. Furthermore independent studies have identified issues relating to quality control by DTC laboratories with different results being reported from samples from the same individual. Consequently, in the current state of knowledge, no child or young athlete should be exposed to DTC genetic testing to define or alter training or for talent identification aimed at selecting gifted children or adolescents. Large scale collaborative projects, may help to develop a stronger scientific foundation on these issues in the future. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  11. Emerging drugs affecting skeletal muscle function and mitochondrial biogenesis - Potential implications for sports drug testing programs.

    Science.gov (United States)

    Thevis, Mario; Schänzer, Wilhelm

    2016-03-15

    A plethora of compounds potentially leading to drug candidates that affect skeletal muscle function and, more specifically, mitochondrial biogenesis, has been under (pre)clinical investigation for rare as well as more common diseases. Some of these compounds could be the object of misuse by athletes aiming at artificial and/or illicit and drug-facilitated performance enhancement, necessitating preventive and proactive anti-doping measures. Early warnings and the continuous retrieval and dissemination of information are crucial for sports drug testing laboratories as well as anti-doping authorities, as they assist in preparation of efficient doping control analytical strategies for potential future threats arising from new therapeutic developments. Scientific literature represents the main source of information, which yielded the herein discussed substances and therapeutic targets, which might become relevant for doping controls in the future. Where available, mass spectrometric data are presented, supporting the development of analytical strategies and characterization of compounds possibly identified in human sports drug testing samples. Focusing on skeletal muscle and mitochondrial biogenesis, numerous substances exhibiting agonistic or antagonistic actions on different cellular 'control centers' resulting in increased skeletal muscle mass, enhanced performance (as determined with laboratory animal models), and/or elevated amounts of mitochondria have been described. Substances of interest include agonists for REV-ERBα (e.g. SR9009, SR9011, SR10067, GSK4112), sirtuin 1 (e.g. SRT1720, SRT2104), adenosine monophosphate-activated protein kinase (AMPK, e.g. AICAR), peroxisome proliferator-activated receptor (PPAR)δ (e.g. GW1516, GW0742, L165041), and inhibitory/antagonistic agents targeting the methionine-folate cycle (MOTS-c), the general control non-derepressible 5 (GCN5) acetyl transferase (e.g. CPTH2, MB-3), myostatin (e.g. MYO-029), the myostatin receptor

  12. Standardization of food allergen extracts for skin prick test

    DEFF Research Database (Denmark)

    Skamstrup Hansen, K; Bindslev-Jensen, C; Skov, P S

    2001-01-01

    The aim of the study was to standardize and evaluate technically optimized food allergen extracts for use in skin prick test (SPT). The standardization procedure comprised 36 allergic histories in 32 food allergic patients with 21 healthy, non-atopic individuals serving as controls. The patients......-blind, placebo-controlled food challenge, except for the hazelnut-allergic patients. The controls were subjected to an open food challenge with all the foods to ensure tolerance. The standardization was performed by means of titrated SPT in accordance with the guidelines on biological standardization from...

  13. A standardized test battery for the study of synesthesia.

    Science.gov (United States)

    Eagleman, David M; Kagan, Arielle D; Nelson, Stephanie S; Sagaram, Deepak; Sarma, Anand K

    2007-01-15

    Synesthesia is an unusual condition in which stimulation of one modality evokes sensation or experience in another modality. Although discussed in the literature well over a century ago, synesthesia slipped out of the scientific spotlight for decades because of the difficulty in verifying and quantifying private perceptual experiences. In recent years, the study of synesthesia has enjoyed a renaissance due to the introduction of tests that demonstrate the reality of the condition, its automatic and involuntary nature, and its measurable perceptual consequences. However, while several research groups now study synesthesia, there is no single protocol for comparing, contrasting and pooling synesthetic subjects across these groups. There is no standard battery of tests, no quantifiable scoring system, and no standard phrasing of questions. Additionally, the tests that exist offer no means for data comparison. To remedy this deficit we have devised the Synesthesia Battery. This unified collection of tests is freely accessible online (http://www.synesthete.org). It consists of a questionnaire and several online software programs, and test results are immediately available for use by synesthetes and invited researchers. Performance on the tests is quantified with a standard scoring system. We introduce several novel tests here, and offer the software for running the tests. By presenting standardized procedures for testing and comparing subjects, this endeavor hopes to speed scientific progress in synesthesia research.

  14. Standard Test Method for Environmental Resistance of Aerospace Transparencies

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This test method covers determination of the effects of exposure to thermal shock, condensing humidity, and simulated weather on aerospace transparent enclosures. 1.2 This test method is not recommended for quality control nor is it intended to provide a correlation to actual service life. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3.1 Exceptions—Certain inch-pound units are furnished in parentheses (not mandatory) and certain temperatures in Fahrenheit associated with other standards are also furnished. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  15. Baseline neurocognitive testing in sports-related concussions: the importance of a prior night's sleep.

    Science.gov (United States)

    McClure, D Jake; Zuckerman, Scott L; Kutscher, Scott J; Gregory, Andrew J; Solomon, Gary S

    2014-02-01

    The management of sports-related concussions (SRCs) utilizes serial neurocognitive assessments and self-reported symptom inventories to assess recovery and safety for return to play (RTP). Because postconcussive RTP goals include symptom resolution and a return to neurocognitive baseline levels, clinical decisions rest in part on understanding modifiers of this baseline. Several studies have reported age and sex to influence baseline neurocognitive performance, but few have assessed the potential effect of sleep. We chose to investigate the effect of reported sleep duration on baseline Immediate Post-Concussion Assessment and Cognitive Testing (ImPACT) performance and the number of patient-reported symptoms. We hypothesized that athletes receiving less sleep before baseline testing would perform worse on neurocognitive metrics and report more symptoms. Cross-sectional study; Level of evidence, 3. We retrospectively reviewed 3686 nonconcussed athletes (2371 male, 1315 female; 3305 high school, 381 college) with baseline symptom and ImPACT neurocognitive scores. Patients were stratified into 3 groups based on self-reported sleep duration the night before testing: (1) short, sleep duration on baseline ImPACT performance. A univariate ANCOVA was performed to investigate the influence of sleep on total self-reported symptoms. When controlling for age and sex as covariates, the MANCOVA revealed significant group differences on ImPACT reaction time, verbal memory, and visual memory scores but not visual-motor (processing) speed scores. An ANCOVA also revealed significant group differences in total reported symptoms. For baseline symptoms and ImPACT scores, subsequent pairwise comparisons revealed these associations to be most significant when comparing the short and intermediate sleep groups. Our results indicate that athletes sleeping fewer than 7 hours before baseline testing perform worse on 3 of 4 ImPACT scores and report more symptoms. Because SRC management and RTP

  16. Quasi-static characterisation and impact testing of auxetic foam for sports safety applications

    International Nuclear Information System (INIS)

    Duncan, Olly; Alderson, Andrew; Foster, Leon; Senior, Terry; Allen, Tom

    2016-01-01

    This study compared low strain rate material properties and impact force attenuation of auxetic foam and the conventional open-cell polyurethane counterpart. This furthers our knowledge with regards to how best to apply these highly conformable and breathable auxetic foams to protective sports equipment. Cubes of auxetic foam measuring 150 × 150 × 150 mm were fabricated using a thermo–mechanical conversion process. Quasi-static compression confirmed the converted foam to be auxetic, prior to being sliced into 20 mm thick cuboid samples for further testing. Density, Poisson’s ratio and the stress–strain curve were all found to be dependent on the position of each cuboid from within the cube. Impact tests with a hemispherical drop hammer were performed for energies up to 6 J, on foams covered with a polypropylene sheet between 1 and 2 mm thick. Auxetic samples reduced peak force by ∼10 times in comparison to the conventional foam. This work has shown further potential for auxetic foam to be applied to protective equipment, while identifying that improved fabrication methods are required. (paper)

  17. SARM-S4 and metabolites detection in sports drug testing: a case report.

    Science.gov (United States)

    Grata, Elia; Perrenoud, Laurent; Saugy, Martial; Baume, Norbert

    2011-12-10

    Recently, pharmaceutical industry developed a new class of therapeutics called Selective Androgen Receptor Modulator (SARM) to substitute the synthetic anabolic drugs used in medical treatments. Since the beginning of the anti-doping testing in sports in the 1970s, steroids have been the most frequently detected drugs mainly used for their anabolic properties. The major advantage of SARMs is the reduced androgenic activities which are the main source of side effects following anabolic agents' administration. In 2010, the Swiss laboratory for doping analyses reported the first case of SARMs abuse during in-competition testing. The analytical steps leading to this finding are described in this paper. Screening and confirmation results were obtained based on liquid chromatography tandem mass spectrometry (LC-MS/MS) analyses. Additional information regarding the SARM S-4 metabolism was investigated by ultra high-pressure liquid chromatography coupled to quadrupole time-of-flight mass spectrometer (UHPLC-QTOF-MS). Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  18. Standard practice for conducting atmospheric corrosion tests on metals

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This practice covers and defines conditions for exposure of metals and alloys to the weather. It sets forth the general procedures that should be followed in any atmospheric test. It is presented as an aid in conducting atmospheric corrosion tests so that some of the pitfalls of such testing may be avoided. As such, it is concerned mainly with panel exposures to obtain data for comparison purposes. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  19. Effect of Caffeine Contained in Sports Drink on Hormones Producing Energy Following Sprint Test Performance in Male Soccer Players

    Directory of Open Access Journals (Sweden)

    Mohammad Fayiz Abumoh'd

    2016-05-01

    Full Text Available This study investigated the effect of caffeine contained in sports drink on hormones producing energy and sprint test performance in male soccer players. Twelve participants (25.97 ± 2.70 y performed the test under thre e conditions (one week apart: caffeine with sports drink (SD-CAF, sports drink (SD, and placebo (PLA. Using a double-blind, placebo-controlled, randomized, crossover protocol, participants performed SD-CAF trial (5 mg/kg of caffeine contained in 300 ml of sports drink 30 minutes prior to sprinting test (7 × 30 m, SD trial (solely 300 ml of sports drink 30 minutes prior to sprinting test, or placebo. Blood analysis indicated significantly higher level of free thyroxine in SD-CAF (21.450 ± 3.048 compared to SD (18.742 ± 1.151 and PLA (16.983 ± 1.783. Similar findings existed regarding insulin (P 0.05. No significant differences were observed between trials in first–fourth repetitions (P > 0.05. Time of fifth-seventh repetitions were significantly lower in SD-CAF compared to SD and PLA (P < 0.05, and were significantly lower in SD than that in PLA (P < 0.05. The time of 7th repetition was (4.331 ± 0.210, 4.610 ± 0.197, 4.81 6 ± 0.171 s for SD-CAF, SD, and PLA, respectively; P < 0.05. In conclusion, caffeine interferes hormones that are responsible for producing energy which in turn have a positive effect on repeated sprint bouts.

  20. Evaluation of Suitability of Non-Standardized Test Block for Ultrasonic Testing

    International Nuclear Information System (INIS)

    Kwon, Ho Young; Lim, Jong Ho; Kang, Sei Sun

    2000-01-01

    Standard Test Block(STB) for UT(Ultrasonic Testing) is a block approved by authoritative for material, shape and quality. STB is used for characteristic tests, sensitivity calibration and control of the time base range of UT inspection devices. The material, size and chemical components of STB should be strictly controlled to meet the related standards such as ASTM and JIS because it has an effect upon sensitivity, resolution and reproductivity of UT. The STBs which are not approved are sometimes used because the qualified STBs are very expensive. So, the purpose of this study is to survey the characteristics, quality and usability of Non-Standardized Test Blocks. Non-Standardized Test Blocks did not meet the standard requirements in size or chemical components, and ultrasonic characteristics. Therefore if the Non-Standardized Test Blocks are used without being tested, it's likely to cause errors in detecting the location and measuring the size of the defects

  1. Standards for Educational and Psychological Testing, 2014 Edition

    Science.gov (United States)

    American Educational Research Association (AERA), 2014

    2014-01-01

    Developed jointly by the American Educational Research Association, American Psychological Association, and the National Council on Measurement in Education, "Standards for Educational and Psychological Testing" (Revised 2014) addresses professional and technical issues of test development and use in education, psychology, and…

  2. CONSTRUCTION AND STANDARDIZATION OF A BATTERY OF BRAILLE SKILL TESTS.

    Science.gov (United States)

    BOURGEAULT, STANLEY E.; WOODCOCK, RICHARD W.

    A BATTERY OF TESTS WAS DEVELOPED AND STANDARDIZED TO MEASURE MASTERY OF TWO BRAILLE CODES--THE GRADE 2 LITERARY CODE AND THE NEMETH CODE FOR MATHEMATICAL NOTATION. DESIGNATED AS THE "COLORADO BRAILLE BATTERY," THESE TESTS PROVIDED OBJECTIVE MEASUREMENT DATA REGARDING A STUDENT'S OVERALL DEVELOPMENT IN BRAILLE, AS WELL AS A MEANS OF…

  3. Standard Guide for Conducting Corrosion Tests in Field Applications

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This guide covers procedures for conducting corrosion tests in plant equipment or systems under operating conditions to evaluate the corrosion resistance of engineering materials. It does not cover electrochemical methods for determining corrosion rates. 1.1.1 While intended primarily for immersion tests, general guidelines provided can be applicable for exposure of test specimens in plant atmospheres, provided that placement and orientation of the test specimens is non-restrictive to air circulation. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See also 10.4.2.

  4. [Discussion on the standard of clinical genetic testing report and the consensus of gene testing industry].

    Science.gov (United States)

    Huang, Hui; Shen, Yiping; Gu, Weihong; Wang, Wei; Wang, Yiming; Qi, Ming; Shen, Jun; Qiu, Zhengqing; Yu, Shihui; Zhou, Zaiwei; Chen, Baixue; Chen, Lei; Chen, Yundi; Cui, Huanhuan; Du, Juan; Gao, Yong; Guo, Yiran; Hu, Chanjuan; Hu, Liang; Huang, Yi; Li, Peipei; Li, Xiaorong; Li, Xiurong; Liu, Yaping; Lu, Jie; Ma, Duan; Ma, Yongyi; Peng, Mei; Song, Fang; Sun, Hongye; Wang, Liang; Wang, Dawei; Wang, Jingmin; Wang, Ling; Wang, Zhengyuan; Wang, Zhinong; Wu, Jihong; Wu, Jing; Wu, Jian; Xu, Yimin; Yao, Hong; Yang, Dongsheng; Yang, Xu; Yang, Yanling; Zhang, Ying; Zhou, Yulin; Zhu, Baosheng; Zeng, Sicong; Peng, Zhiyu; Huang, Shangzhi

    2018-02-10

    The widespread application of next generation sequencing (NGS) in clinical settings has enabled testing, diagnosis, treatment and prevention of genetic diseases. However, many issues have arisen in the meanwhile. One of the most pressing issues is the lack of standards for reporting genetic test results across different service providers. The First Forum on Standards and Specifications for Clinical Genetic Testing was held to address the issue in Shenzhen, China, on October 28, 2017. Participants, including geneticists, clinicians, and representatives of genetic testing service providers, discussed problems of clinical genetic testing services across in China and shared opinions on principles, challenges, and standards for reporting clinical genetic test results. Here we summarize expert opinions presented at the seminar and report the consensus, which will serve as a basis for the development of standards and guidelines for reporting of clinical genetic testing results, in order to promote the standardization and regulation of genetic testing services in China.

  5. Standard practice for modified salt spray (fog) testing

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This practice covers and sets forth conditions for five modifications in salt spray (fog) testing for specification purposes. These are in chronological order of their development: 1.1.1 Annex A1, acetic acid-salt spray test, continuous. 1.1.2 Annex A2, cyclic acidified salt spray test. 1.1.3 Annex A3, seawater acidified test, cyclic (SWAAT). 1.1.4 Annex A4, SO2 salt spray test, cyclic. 1.1.5 Annex A5, dilute electrolyte cyclic fog dry test. 1.2 This practice does not prescribe the type of modification, test specimen or exposure periods to be used for a specific product, nor the interpretation to be given to the results. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicabilit...

  6. PROPOSAL FOR NEW WORLD STANDARD FOR TESTING SOLAR COOKERS

    Directory of Open Access Journals (Sweden)

    ASHOK KUNDAPUR

    2009-09-01

    Full Text Available New protocol to test solar cooker is being proposed. The earlier tests measured only the thermal efficiency. There is an urgent need to look into other important parameters of the cooker such as its stagnation capacity, cost per watts delivered, weight of the cooker, ease of handling and aesthetics. The proposal also aims at standardization of reporting the test results so that it can be easily understood by common persons who wishes to use one.

  7. Standard test method for conducting potentiodynamic polarization resistance measurements

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1997-01-01

    1.1 This test method covers an experimental procedure for polarization resistance measurements which can be used for the calibration of equipment and verification of experimental technique. The test method can provide reproducible corrosion potentials and potentiodynamic polarization resistance measurements. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  8. Fabrication and Testing of Pyramidal X- Band Standard Horn Antenna

    OpenAIRE

    Hasan F. Khazaal; Haider Th. Salim Alrikabi; Anwar N. Mohammed Ali; Kadhim A. Neamah; Ali S. Shanan

    2017-01-01

    Standard horn antennas are an important device to evaluate many types of antennas, since they are used as a reference to any type of antennas within the microwave frequency bands. In this project the fabrication process and tests of standard horn antenna operating at X-band frequencies have been proposed. The fabricated antenna passed through multi stages of processing of its parts until assembling the final product. These stages are (milling, bending, fitting and welding). The assembled ante...

  9. A systematic review protocol investigating tests for physical or physiological qualities and game-specific skills commonly used in rugby and related sports and their psychometric properties.

    Science.gov (United States)

    Chiwaridzo, Matthew; Ferguson, Gillian D; Smits-Engelsman, Bouwien C M

    2016-07-27

    Scientific focus on rugby has increased over the recent years, providing evidence of the physical or physiological characteristics and game-specific skills needed in the sport. Identification of tests commonly used to measure these characteristics is important for the development of test batteries, which in turn may be used for talent identification and injury prevention programmes. Although there are a number of tests available in the literature to measure physical or physiological variables and game-specific skills, there is limited information available on the psychometric properties of the tests. Therefore, the purpose of this study is to systematically review the literature for tests commonly used in rugby to measure physical or physiological characteristics and rugby-specific skills, documenting evidence of reliability and validity of the identified tests. A systematic review will be conducted. Electronic databases such as Scopus, MEDLINE via EBSCOhost and PubMed, Academic Search Premier, CINAHL and Africa-Wide Information via EBSCOhost will be searched for original research articles published in English from January 1, 1995, to December 31, 2015, using a pre-defined search strategy. The principal investigator will select potentially relevant articles from titles and abstracts. To minimise bias, full text of titles and abstracts deemed potentially relevant will be retrieved and reviewed by two independent reviewers based on the inclusion criteria. Data extraction will be conducted by the principal investigator and verified by two independent reviewers. The Consensus-based Standards for the Selection of Health Measurement Instruments (COSMIN) checklist will be used to assess the methodological quality of the selected studies. Choosing an appropriate test to be included in the screening test battery should be based on sound psychometric properties of the test available. This systematic review will provide an overview of the tests commonly used in rugby union

  10. Standard Test Method for Abrasive Wear Resistance of Cemented

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This test method covers the determination of abrasive wear resistance of cemented carbides. 1.2 The values stated in inch-pound units are to be regarded as the standard. The SI equivalents of inch-pound units are in parentheses and may be approximate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  11. Standard Test Method for Measured Speed of Oil Diffusion Pumps

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1982-01-01

    1.1 This test method covers the determination of the measured speed (volumetric flow rate) of oil diffusion pumps. 1.2 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  12. Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2002-01-01

    1.1 This test method covers the determination of the honeycomb Poisson's ratio from the anticlastic curvature radii, see . 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given may be approximate. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  13. Standard Test Method for Shear Fatigue of Sandwich Core Materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2000-01-01

    1.1 This test method covers determination of the effect of repeated shear loads on sandwich core materials. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given may be approximate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  14. Standard Test Method for Dimensional Stability of Sandwich Core Materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2002-01-01

    1.1 This test method covers the determination of the sandwich core dimensional stability in the two plan dimensions. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given may be approximate. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  15. DOE standard: Filter test facility quality program plan

    International Nuclear Information System (INIS)

    1999-02-01

    This standard was developed primarily for application in US Department of Energy programs. It contains specific direction for HEPA filter testing performed at a DOE-accepted HEPA Filter Test Facility (FTF). Beneficial comments (recommendations, additions, deletions) and any pertinent data that may improve this document should be sent to the Office of Nuclear Safety Policy and Standards (EH-31), US Department of Energy, Washington, DC 20585, by letter or by using the self-addressed Document Improvement Proposal form (DOE F 1300.3) appearing at the end of this document

  16. Assessing cultural validity in standardized tests in stem education

    Science.gov (United States)

    Gassant, Lunes

    This quantitative ex post facto study examined how race and gender, as elements of culture, influence the development of common misconceptions among STEM students. Primary data came from a standardized test: the Digital Logic Concept Inventory (DLCI) developed by Drs. Geoffrey L. Herman, Michael C. Louis, and Craig Zilles from the University of Illinois at Urbana-Champaign. The sample consisted of a cohort of 82 STEM students recruited from three universities in Northern Louisiana. Microsoft Excel and the Statistical Package for the Social Sciences (SPSS) were used for data computation. Two key concepts, several sub concepts, and 19 misconceptions were tested through 11 items in the DLCI. Statistical analyses based on both the Classical Test Theory (Spearman, 1904) and the Item Response Theory (Lord, 1952) yielded similar results: some misconceptions in the DLCI can reliably be predicted by the Race or the Gender of the test taker. The research is significant because it has shown that some misconceptions in a STEM discipline attracted students with similar ethnic backgrounds differently; thus, leading to the existence of some cultural bias in the standardized test. Therefore the study encourages further research in cultural validity in standardized tests. With culturally valid tests, it will be possible to increase the effectiveness of targeted teaching and learning strategies for STEM students from diverse ethnic backgrounds. To some extent, this dissertation has contributed to understanding, better, the gap between high enrollment rates and low graduation rates among African American students and also among other minority students in STEM disciplines.

  17. Similar tests and the standardized log likelihood ratio statistic

    DEFF Research Database (Denmark)

    Jensen, Jens Ledet

    1986-01-01

    When testing an affine hypothesis in an exponential family the 'ideal' procedure is to calculate the exact similar test, or an approximation to this, based on the conditional distribution given the minimal sufficient statistic under the null hypothesis. By contrast to this there is a 'primitive......' approach in which the marginal distribution of a test statistic considered and any nuisance parameter appearing in the test statistic is replaced by an estimate. We show here that when using standardized likelihood ratio statistics the 'primitive' procedure is in fact an 'ideal' procedure to order O(n -3...

  18. Sports Supplements

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Sports Supplements KidsHealth / For Teens / Sports Supplements What's in ... really work? And are they safe? What Are Sports Supplements? Sports supplements (also called ergogenic aids ) are ...

  19. Standardization of Solar Mirror Reflectance Measurements - Round Robin Test: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Meyen, S.; Lupfert, E.; Fernandez-Garcia, A.; Kennedy, C.

    2010-10-01

    Within the SolarPaces Task III standardization activities, DLR, CIEMAT, and NREL have concentrated on optimizing the procedure to measure the reflectance of solar mirrors. From this work, the laboratories have developed a clear definition of the method and requirements needed of commercial instruments for reliable reflectance results. A round robin test was performed between the three laboratories with samples that represent all of the commercial solar mirrors currently available for concentrating solar power (CSP) applications. The results show surprisingly large differences in hemispherical reflectance (sh) of 0.007 and specular reflectance (ss) of 0.004 between the laboratories. These differences indicate the importance of minimum instrument requirements and standardized procedures. Based on these results, the optimal procedure will be formulated and validated with a new round robin test in which a better accuracy is expected. Improved instruments and reference standards are needed to reach the necessary accuracy for cost and efficiency calculations.

  20. Standard Test Method for Laboratory Aging of Sandwich Constructions

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1999-01-01

    1.1 This test method covers the determination of the resistance of sandwich panels to severe exposure conditions as measured by the change in selected properties of the material after exposure. The exposure cycle to which the specimen is subjected is an arbitrary test having no correlation with natural weathering conditions. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given may be approximate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  1. Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1982-01-01

    1.1 This test method covers the apparatus and procedure for the determination of the weight loss of carbon fibers, exposed to ambient hot air, as a means of characterizing their oxidative resistance. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units which are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard information, see Section 8.

  2. Standardization of food allergen extracts for skin prick test

    DEFF Research Database (Denmark)

    Skamstrup Hansen, K; Bindslev-Jensen, C; Skov, P S

    2001-01-01

    The aim of the study was to standardize and evaluate technically optimized food allergen extracts for use in skin prick test (SPT). The standardization procedure comprised 36 allergic histories in 32 food allergic patients with 21 healthy, non-atopic individuals serving as controls. The patients...... had a history of allergic symptoms upon ingestion of either cow's milk (n=3), hen's egg (n=9), wheat (n=4), hazelnut (n=14) or cod (n=6). They also had specific IgE in serum to the food in question and a positive SPT with a fresh preparation of the food. The diagnosis had been confirmed by a double......-blind, placebo-controlled food challenge, except for the hazelnut-allergic patients. The controls were subjected to an open food challenge with all the foods to ensure tolerance. The standardization was performed by means of titrated SPT in accordance with the guidelines on biological standardization from...

  3. Sport, and use of anabolic androgenic steroids among Icelandic high school students: a critical test of three perspectives

    Directory of Open Access Journals (Sweden)

    Halldorsson Vidar

    2010-12-01

    Full Text Available Abstract Background This study investigates the use of anabolic androgenic steroids (AAS among a national representative sample of high school students in Iceland. We test several hypotheses drawn from three perspectives. The first perspective focuses on the use of AAS as an individual phenomenon motivated by the desire to succeed in sport. The second perspective views the use of AAS as shaped by norms and values embedded in social relationships of formally organized sport. The third perspective suggests that factors outside sport, which have been shown to correlate with the use of other substances, predict the use of AAS. Method We use logistic regression and predicted probabilities to analyze data from a national representative survey of 11031 Icelandic high school students. Results Our results indicated that the use of AAS is not significantly related to participation in formally organized sports. However, it positively relates to fitness and physical training in informal contexts. We found a relatively strong relationship between the use of AAS and the use of illicit substances and a moderate relationship between AAS use and alcohol and tobacco consumption. We also found a significant negative relationship between AAS use and school integration and school achievement, and a significant positive relationship between AAS use and school anomie. The relation between AAS use and family-related variables was weaker. Finally, we found that the relationship between sport participation, physical exercise, and AAS use varies across levels of anomie and integration. Conclusion Our findings suggest that the use of AAS and especially illegal substances should be considered more as a social and a health problem rather than a sport specific issue. We found that high school students participating in fitness and informal training outside of formally organized sport clubs are the main risk group and should be the target of prevention efforts. However, this

  4. Standardized Testing and School Segregation: Like Tinder for Fire?

    Science.gov (United States)

    Knoester, Matthew; Au, Wayne

    2017-01-01

    Recent research suggests that high-stakes standardized testing has played a negative role in the segregation of children by race and class in schools. In this article we review research on the overall effects of segregation, the positive and negative aspects of how desegregation plans were carried out following the 1954 Supreme Court decision…

  5. Report on the Standardization Project "Formal Methods in Conformance Testing"

    NARCIS (Netherlands)

    Baumgarten, B.; Hogrefe, D.; Heymer, S.; Burkhardt, H.-J.; Giessler, A.; Tretmans, G.J.

    1996-01-01

    This paper presents the latest developments in the “Formal Methods in Conformance Testing��? (FMCT) project of ISO and ITU–T. The project has been initiated to study the role of formal description techniques in the conformance testing process. The goal is to develop a standard that defines the

  6. Non-standard testing of mechanical characteristics of historic mortars

    Czech Academy of Sciences Publication Activity Database

    Drdácký, Miloš

    2011-01-01

    Roč. 5, 4-5 (2011), s. 383-394 ISSN 1558-3058 R&D Projects: GA ČR(CZ) GA103/09/2067 Institutional research plan: CEZ:AV0Z20710524 Keywords : non-standard test specimen * historic mortar * compressive strength Subject RIV: AL - Art, Architecture, Cultural Heritage Impact factor: 0.235, year: 2011

  7. Corporate Schooling Meets Corporate Media: Standards, Testing, and Technophilia

    Science.gov (United States)

    Saltman, Kenneth J.

    2016-01-01

    Educational publishing corporations and media corporations in the United States have been converging, especially through the promotion of standardization, testing, and for-profit educational technologies. Media and technology companies--including News Corp, Apple, and Microsoft--have significantly expanded their presence in public schools to sell…

  8. Development of Standardized Material Testing Protocols for Prosthetic Liners.

    Science.gov (United States)

    Cagle, John C; Reinhall, Per G; Hafner, Brian J; Sanders, Joan E

    2017-04-01

    A set of protocols was created to characterize prosthetic liners across six clinically relevant material properties. Properties included compressive elasticity, shear elasticity, tensile elasticity, volumetric elasticity, coefficient of friction (CoF), and thermal conductivity. Eighteen prosthetic liners representing the diverse range of commercial products were evaluated to create test procedures that maximized repeatability, minimized error, and provided clinically meaningful results. Shear and tensile elasticity test designs were augmented with finite element analysis (FEA) to optimize specimen geometries. Results showed that because of the wide range of available liner products, the compressive elasticity and tensile elasticity tests required two test maxima; samples were tested until they met either a strain-based or a stress-based maximum, whichever was reached first. The shear and tensile elasticity tests required that no cyclic conditioning be conducted because of limited endurance of the mounting adhesive with some liner materials. The coefficient of friction test was based on dynamic coefficient of friction, as it proved to be a more reliable measurement than static coefficient of friction. The volumetric elasticity test required that air be released beneath samples in the test chamber before testing. The thermal conductivity test best reflected the clinical environment when thermal grease was omitted and when liner samples were placed under pressure consistent with load bearing conditions. The developed procedures provide a standardized approach for evaluating liner products in the prosthetics industry. Test results can be used to improve clinical selection of liners for individual patients and guide development of new liner products.

  9. Study on method of data standardization in interferometric testing

    Science.gov (United States)

    Chen, Wei

    2010-10-01

    As a rule, Interferometers are used to test the figure in the polishing phase of optical component, it could provide advance tutor suggestion for manufacturing. It is unable to get the whole wave-front interferogram usually because phase-shift Interferometry is sensitive to environment vibration, so the exactly interference data of the optical surface could not be obtained. Various spatial point on the tested optical component will be given by calculation method about arithmetic average value of equal accuracy is provied. This paper describes the testing results of optical components in size Φ1200mm, it is proved the method could eliminate the vibration effectively and get the standardization data.

  10. Impact of standard test protocols on sporicidal efficacy.

    Science.gov (United States)

    Wesgate, R; Rauwel, G; Criquelion, J; Maillard, J-Y

    2016-07-01

    There has been an increase in the availability of commercial sporicidal formulations. Any comparison of sporicidal data from the literature is hampered by the number of different standard tests available and the use of diverse test conditions including bacterial strains and endospore preparation. To evaluate the effect of sporicidal standard tests on the apparent activity of eight biocides against Clostridium difficile and Bacillus subtilis. The activity of eight biocidal formulations including two oxidizing agents, two aldehydes, three didecyldimethylammonium chloride (DDAC) and amine formulations, and sodium hypochlorite were evaluated using four standard sporicidal tests (BS EN 14347, BS EN13704, ASTM E2197-11, and AOAC MB-15-03) against B. subtilis (ACTC 19659) and C. difficile (NCTC 11209) spores. C. difficile spores were more susceptible to the sporicides than were B. subtilis spores, regardless of the method used. There were differences in sporicidal activity between methods at 5 min but not at 60 min exposure. DDAC and amine-based products were not sporicidal when neutralized appropriately. Neutralization validation was confirmed for these biocides using the reporting format described in the BS EN standard tests, although the raw data appear to indicate that neutralization failed. The different methods, whether based on suspension or carrier tests, produced similar sporicidal inactivation data. This study suggests that detailed neutralization validation data should be reported to ensure that neutralization of active spores is effective. Failure to do so may lead to erroneous sporicidal claims. Copyright © 2016 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

  11. Drugs in sporttesting results from the South African Laboratory ...

    African Journals Online (AJOL)

    Objective. To summarise the results of the past 8 years obtained at the South African Doping Control Laboratory and to compare the results with international statistics. Method. Screening procedures were performed on 14 017 urine samples collected from competitors in 54 different sporting codes during the period 1995 ...

  12. Estimation of maximal oxygen uptake via submaximal exercise testing in sports, clinical, and home settings

    NARCIS (Netherlands)

    Sartor, F.; Vernillo, G.; de Morree, H.M.; Bonomi, A.G.; La Torre, A.; Kubis, H.P.; Veicsteinas, A.

    2013-01-01

    Assessment of the functional capacity of the cardiovascular system is essential in sports medicine. For athletes, the maximal oxygen uptake (V˙O2max) provides valuable information about their aerobic power. In the clinical setting, the V˙O2max provides important diagnostic and prognostic information

  13. Wind-tunnel testing of sports stadia to optimise their use and safety

    CSIR Research Space (South Africa)

    Goliger, Adam M

    2010-04-01

    Full Text Available In recent years large-scale global sports events and related ventures have received significant international media coverage and socio-economic support from the hosting countries. This is especially evident in respect of all recent Olympic and FIFA...

  14. Drugs in sporttesting results from the South African Laboratory ...

    African Journals Online (AJOL)

    Enrique

    In 1982 the Department of Pharmacology at the University of the Free State was approached by several sports adminis- trators to analyse urine samples from competitors for the presence of prohibited substances. An increasing number of competitors had seemingly turned to the use of drugs in an effort to enhance ...

  15. Standard Practice for Quality Management Systems for Nondestructive Testing Agencies

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This practice covers general requirements for the establishment and maintenance of a quality management system for agencies engaged in nondestructive testing (NDT). 1.2 This practice utilizes criteria contained in Practice E 543. 1.3 This practice utilizes criteria contained in American National Standard ANSI/ISO/ASQ Q9001–2000, Quality management systems—Requirements. 1.4 This practice recognizes the importance of establishing minimum safety criteria. 1.5 The use of SI or inch-pound units, or combinations thereof, will be the responsibility of the technical committee whose standards are referred to in this standard. 1.6 This practice does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this practice to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  16. Standard test method for macroetching metals and alloys

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2000-01-01

    1.1 These test procedures describe the methods of macro- etching metals and alloys to reveal their macrostructure. 1.2 The values stated in inch-pound units are to be regarded as the standard. The SI equivalents of inch-pound units may be approximate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.2, 7.1, 8.1.3, 8.2.1, 8.8.3, 8.10.1.1, and 8.13.2.

  17. RF tests on the Etam Standard C antenna

    Science.gov (United States)

    Price, R.

    1982-05-01

    Radiometric measurements on the Etam Standard C antenna are described in this paper. Gain-to-noise temperature ratio (G/T), receive and transmit gain, noise temperature, return loss, and port-to-port isolation were measured, and communication and tracking patterns taken. Because of the very low spectral flux densities in the 14/11-GHz bands, it was necessary to use radiometric methods for measuring G/T, gain and temperature. Although in Standard A antennas Y-factors range between 3 and 6 dB, in Standard C antennas they are only 0.4-0.5 dB. Thus, errors and uncertainties, which are negligible in a 6/4-GHz test, become major at 14/11 GHz. This difficulty was overcome at Etam by applying a refinement in switched radiometry, which resulted in the collection of a large amount of useful data.

  18. Standard test methods for conducting time-for-rupture notch tension tests of materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 These test methods cover the determination of the time for rupture of notched specimens under conditions of constant load and temperature. These test methods also includes the essential requirements for testing equipment. 1.2 The values stated in inch-pound units are to be regarded as the standard. The units in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  19. Effects of mental practice on performance are moderated by cognitive anxiety as measured by the Sport Competition Anxiety Test.

    Science.gov (United States)

    Halvari, H

    1996-12-01

    45 subjects were assessed for cognitive anxiety on the Sport Competition Anxiety Test. Two months later they observed a person performing a new motor task which required high cognitive processing to be performed well. After this observation, 22 subjects were randomly assigned to a Mental Practice and 23 to a Control group. The former performed a cognitive rehearsal of the task, whereas the latter did not. None practiced the task physically before being tested. Analysis of variance showed that both errors and performance time interacted significantly with Mental Practice versus Control group scores and scores on the Sport Competition Anxiety Test. Among subjects who practiced mentally, those scoring low on cognitive anxiety performed significantly better than subjects who scored high. Further, the relationship between test scores of cognitive anxiety and performance for the total sample was analysed by different curvilinear regression models. The cubic model fitted the data better and accounted for a greater percent of variance on error performance explained by anxiety test scores (R = .39) than the linear correlation (r = .25). This cubic model formed a polynomial relationship between cognitive anxiety test scores and error in performance.

  20. International standardization of instruments for neutron irradiation tests

    International Nuclear Information System (INIS)

    Tanimoto, Masataka; Shibata, Akira; Nakamura, Jinichi; Tsuchiya, Kunihiko; Cho, M.; Lee, C.; Park, S.; Choo, K.

    2012-01-01

    The JMTR in JAEA and HANARO in KAERI are the foremost testing/research reactors in the world and these are expected to contribute to many nuclear fields. As a part of instrument development in irradiation field, information exchange of instruments started from 2010 under the cooperation agreements between KAERI and JAEA. The instruments developed in JMTR and HANARO are introduced and cooperation experiments as future plan are discussed for international standardization. (author)

  1. Standard Waste Box Lid Screw Removal Option Testing

    Energy Technology Data Exchange (ETDEWEB)

    Anast, Kurt Roy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-03-11

    This report provides results from test work conducted to resolve the removal of screws securing the standard waste box (SWB) lids that hold the remediated nitrate salt (RNS) drums. The test work evaluated equipment and process alternatives for removing the 42 screws that hold the SWB lid in place. The screws were secured with a red Loctite thread locker that makes removal very difficult because the rivets that the screw threads into would slip before the screw could be freed from the rivet, making it impossible to remove the screw and therefore the SWB lid.

  2. Fabrication and Testing of Pyramidal X- Band Standard Horn Antenna

    Directory of Open Access Journals (Sweden)

    Hasan F. Khazaal

    2017-11-01

    Full Text Available Standard horn antennas are an important device to evaluate many types of antennas, since they are used as a reference to any type of antennas within the microwave frequency bands. In this project the fabrication process and tests of standard horn antenna operating at X-band frequencies have been proposed. The fabricated antenna passed through multi stages of processing of its parts until assembling the final product. These stages are (milling, bending, fitting and welding. The assembled antenna subjected to two types of tests to evaluate its performance. The first one is the test by two port network analyzer to point out S & Z parameters, input resistance, and the voltage standing wave ratio of the horn, while the second test was done using un-echoic chamber to measure the gain, side lobes level and the half power beam width. The results of testing come nearly as a theoretical value of the most important of antenna parameters, like; gain, side lobe level, -3 dB beam width, return loss and voltage standing wave ratio "VSWR", input Impedance.

  3. Standard Test Method for Normal Spectral Emittance at Elevated Temperatures

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1972-01-01

    1.1 This test method describes a highly accurate technique for measuring the normal spectral emittance of electrically conducting materials or materials with electrically conducting substrates, in the temperature range from 600 to 1400 K, and at wavelengths from 1 to 35 μm. 1.2 The test method requires expensive equipment and rather elaborate precautions, but produces data that are accurate to within a few percent. It is suitable for research laboratories where the highest precision and accuracy are desired, but is not recommended for routine production or acceptance testing. However, because of its high accuracy this test method can be used as a referee method to be applied to production and acceptance testing in cases of dispute. 1.3 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this stan...

  4. NedWind 25 Blade Testing at NREL for the European Standards Measurement and Testing Program

    Energy Technology Data Exchange (ETDEWEB)

    Larwood, S.; Musial, W.; Freebury, G.; Beattie, A.G.

    2001-04-19

    In the mid-90s the European community initiated the Standards, Measurements, and Testing (SMT) program to harmonize testing and measurement procedures in several industries. Within the program, a project was carried out called the European Wind Turbine Testing Procedure Development. The second part of that project, called Blade Test Methods and Techniques, included the United States and was devised to help blade-testing laboratories harmonize their testing methods. This report provides the results of those tests conducted by the National Renewable Energy Laboratory.

  5. Standard practice for conducting moist SO2 tests

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2002-01-01

    1.1 This practice covers the apparatus and procedure to be used in conducting qualitative assessment tests in accordance with the requirements of material or product specifications by means of specimen exposure to condensed moisture containing sulfur dioxide. 1.2 The exposure conditions may be varied to suit particular requirements and this practice includes provisions for use of different concentrations of sulfur dioxide and for tests either running continuously or in cycles of alternate exposure to the sulfur dioxide containing atmosphere and to the ambient atmosphere. 1.3 The variant of the test to be used, the exposure period required, the type of test specimen, and the criteria of failure are not prescribed by this practice. Such details are provided in appropriate material and product purchase specifications. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety c...

  6. Sports spectator behavior: a test of the theory of planned behavior.

    Science.gov (United States)

    Lu, Wan-Chen; Lin, Shin-Huei; Cheng, Chih-Fu

    2011-12-01

    The theory of planned behavior has been applied to sports and exercise behaviors. According to this theory, human intention to take action in a specific context is guided by three antecedents: attitude, subjective norm, and perceived behavioral control. Behavioral intention mediates the relationships between these three considerations and its ultimate performance. However, this theory has seldom been applied to the behaviors of spectators of sporting events. A sample of 269 volleyball spectators in Taiwan was studied to examine whether people's intention mediated their attitudes, subjective norms, and perceived behavioral control toward a given behavior, watching the 2010 Fédération Internationale de Volleyball World Grand Prix in Taipei. Regression analyses did not support behavioral intention as a mediator. This result is discussed in the context of planned behavior.

  7. The Analysis of the Psychological Tests Using In Educational Institutions According To the Testing Standards

    Directory of Open Access Journals (Sweden)

    Ezgi MOR DİRLİK

    2017-12-01

    Full Text Available The purpose of this research is to analyze four psychological tests which are frequently used in the Guidance and Research Centers and in the guidance services of the schools according to the standards for educational and psychological testing of APA (American Psychological Association and test adaption standards of ITC (International Testing Commission. The tests were determined based on the goal- oriented sample selecting method and were selected from the most frequently used psychological tests in Guidance and Research Centers and school’s guidance centers. These tests are: Scale of Academic Self-Concept (Akademik Benlik Kavramı Ölçeği-ABKÖ, Evaluation of Early Childhood Development Tool (Gazi Erken Çocukluk Gelişimi Değerlendirme Aracı-GEÇDA, Primary Mental Abilities 7-11 (TKT 7-11, and Wechsler Intelligence Scale for Children Revised Form (WISC-R. In this research, the chapters related to the validity, reliability and test development and revision of “Standards For Educational And Psychological Testing” (APA, 1999 and the adaptation standards developed by ITC were translated into Turkish and a checklist was created by using these documents. The checklist has got two forms as short and long form. The tests were analyzed according to the short form of the checklist by researcher. In order to examine the reliability of these analyses, the analyses were repeated in three weeks’ time. Data of these analyses were exported to the Statistical Package for Social Sciences (SPSS 20.0 and descriptive analysis was perfomed. As a result of this research, the meeting levels of the psychological tests to the test standards in the checklist and the features of the tests which should be improved according to the validity, reliability, test development and revision and test adaptation were determined. In conclusion, the standards analyzed have not been met satisfactorily by ABKÖ and GEÇDA, and according to the analyses of the realibility

  8. Gold Standard or Fool's Gold? The Efficacy of Displacement Variables as Indicators of Energy Expenditure in Team Sports.

    Science.gov (United States)

    Polglaze, Ted; Dawson, Brian; Peeling, Peter

    2016-05-01

    Over recent decades, the use of player tracking technology to monitor physical work output has become established practice in many team sports. Early tracking systems were manual in nature, relying on subjective assessments and arbitrary classifications of movement intensity. Poor spatial and temporal resolution meant that only gross displacement measures could be used to infer energy demands. However, the advent and evolution of automated systems, with higher sampling rates and improved accuracy, have enabled data collection to occur on a mass scale, and served as a catalyst for extensive research into the demands of team sport activity, including comparisons between different groups of athletes, and the effects of various interventions on performance. The inherent assumption with this research is that, based on steady-state models where energy cost is independent of speed, total distance and average speed are indicative of the amount and rate of work done, respectively. This assumption could be justified if the activity was performed at a constant speed in a straight line. However, team sport movement involves continual changes in both speed and direction, both of which increase energy cost. Accordingly, new models have emerged that incorporate both speed and acceleration to determine metabolic power. This provides a more complete measure of energy expenditure in intermittent activity, and is potentially more suitable than displacement variables for research into the demands of team sports.

  9. The Standard-Model Extension and Gravitational Tests

    Directory of Open Access Journals (Sweden)

    Jay D. Tasson

    2016-10-01

    Full Text Available The Standard-Model Extension (SME provides a comprehensive effective field-theory framework for the study of CPT and Lorentz symmetry. This work reviews the structure and philosophy of the SME and provides some intuitive examples of symmetry violation. The results of recent gravitational tests performed within the SME are summarized including analysis of results from the Laser Interferometer Gravitational-Wave Observatory (LIGO, sensitivities achieved in short-range gravity experiments, constraints from cosmic-ray data, and results achieved by studying planetary ephemerids. Some proposals and ongoing efforts will also be considered including gravimeter tests, tests of the Weak Equivalence Principle, and antimatter experiments. Our review of the above topics is augmented by several original extensions of the relevant work. We present new examples of symmetry violation in the SME and use the cosmic-ray analysis to place first-ever constraints on 81 additional operators.

  10. Key Topics in Sports Medicine

    OpenAIRE

    2006-01-01

    Key Topics in Sports Medicine is a single quick reference source for sports and exercise medicine. It presents the essential information from across relevant topic areas, and includes both the core and emerging issues in this rapidly developing field. It covers: 1) Sports injuries, rehabilitation and injury prevention, 2) Exercise physiology, fitness testing and training, 3) Drugs in sport, 4) Exercise and health promotion, 5) Sport and exercise for special and clinical populations, 6) The ps...

  11. Illegal performance enhancing drugs and doping in sport: a picture-based brief implicit association test for measuring athletes’ attitudes

    Science.gov (United States)

    2014-01-01

    Background Doping attitude is a key variable in predicting athletes’ intention to use forbidden performance enhancing drugs. Indirect reaction-time based attitude tests, such as the implicit association test, conceal the ultimate goal of measurement from the participant better than questionnaires. Indirect tests are especially useful when socially sensitive constructs such as attitudes towards doping need to be described. The present study serves the development and validation of a novel picture-based brief implicit association test (BIAT) for testing athletes’ attitudes towards doping in sport. It shall provide the basis for a transnationally compatible research instrument able to harmonize anti-doping research efforts. Method Following a known-group differences validation strategy, the doping attitudes of 43 athletes from bodybuilding (representative for a highly doping prone sport) and handball (as a contrast group) were compared using the picture-based doping-BIAT. The Performance Enhancement Attitude Scale (PEAS) was employed as a corresponding direct measure in order to additionally validate the results. Results As expected, in the group of bodybuilders, indirectly measured doping attitudes as tested with the picture-based doping-BIAT were significantly less negative (η2 = .11). The doping-BIAT and PEAS scores correlated significantly at r = .50 for bodybuilders, and not significantly at r = .36 for handball players. There was a low error rate (7%) and a satisfactory internal consistency (r tt  = .66) for the picture-based doping-BIAT. Conclusions The picture-based doping-BIAT constitutes a psychometrically tested method, ready to be adopted by the international research community. The test can be administered via the internet. All test material is available “open source”. The test might be implemented, for example, as a new effect-measure in the evaluation of prevention programs. PMID:24479865

  12. Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This test method covers conducting bird impact tests under a standard set of conditions by firing a packaged bird at a stationary transparency mounted in a support structure. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.

  13. Standard Test Method for Cavitation Erosion Using Vibratory Apparatus

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This test method covers the production of cavitation damage on the face of a specimen vibrated at high frequency while immersed in a liquid. The vibration induces the formation and collapse of cavities in the liquid, and the collapsing cavities produce the damage to and erosion (material loss) of the specimen. 1.2 Although the mechanism for generating fluid cavitation in this method differs from that occurring in flowing systems and hydraulic machines (see 5.1), the nature of the material damage mechanism is believed to be basically similar. The method therefore offers a small-scale, relatively simple and controllable test that can be used to compare the cavitation erosion resistance of different materials, to study in detail the nature and progress of damage in a given material, or—by varying some of the test conditions—to study the effect of test variables on the damage produced. 1.3 This test method specifies standard test conditions covering the diameter, vibratory amplitude and frequency of the...

  14. Testing Conformance to Standards: Notes on the OGC CITE Initiative

    Science.gov (United States)

    Bigagli, Lorenzo; Vitale, Fabrizio

    2010-05-01

    In this work, we report on the issues and lessons learnt from our recent experience on assessing service compliance to OGC geospatial standards. Official conformity is warranted by the OGC Compliance & Interoperability Testing & Evaluation (CITE) initiative, through a centrally managed repository of tests, typically developed via initiatives funded by external sponsors. In particular, we have been involved in the ESA-led Heterogeneous Missions Accessibility Testbed (HMA-T) project. HMA-T objectives included the definition of specifications (and related compliance tests) for Earth Observation (EO) Product discovery and access. Our activities have focused on the EO and Catalogue of ISO Metadata (CIM) Extension Packages (EPs) of the ebRIM Application Profile (AP) of the Catalogue Service for the Web (CSW) OGC standard. Our main contributions have regarded the definition of Abstract Test Suites (ATS's) for the above specifications, as well as the development of Reference Implementations (RIs) and concrete Executable Test Suites (ETS's). According to the state-of-the-art, we have implemented the ETS's in Compliance Test Language (CTL), an OGC standard dialect of XML, and deployed the scripts onto the open-source Test Evaluation And Measurement (TEAM) Engine, the official OGC compliance test platform. A significant challenge was to accommodate legacy services, that can not support data publishing. Hence, we could not assume the presence of control test data, necessary for exhaustive assessment. To cope with this, we have proposed and experimented tests for assessing the internal coherence of a target service instance. Another issue was to assess the overall behavior of a target service instance. Although quite obvious, this requirement proved to be hard (if unviable) to implement, since the design of the OGC catalogue specification is multi-layered (i.e. comprised of EP, AP, binding and core functionalities) and, according to the current OGC rationale, ATS/ETS at each

  15. Standard practice for torque calibration of testing machines and devices

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This practice covers procedures and requirements for the calibration of torque for static and quasi-static torque capable testing machines or devices. These may, or may not, have torque indicating systems and include those devices used for the calibration of hand torque tools. Testing machines may be calibrated by one of the three following methods or combination thereof: 1.1.1 Use of standard weights and lever arms. 1.1.2 Use of elastic torque measuring devices. 1.1.3 Use of elastic force measuring devices and lever arms. 1.1.4 Any of the methods require a specific uncertainty of measurement and a traceability derived from national standards of mass and length. 1.2 The procedures of 1.1.1, 1.1.2, and 1.1.3 apply to the calibration of the torque-indicating systems associated with the testing machine, such as a scale, dial, marked or unmarked recorder chart, digital display, etc. In all cases the buyer/owner/user must designate the torque-indicating system(s) to be calibrated and included in the repor...

  16. Alternate performance standard project: Interpreting the post-construction test

    International Nuclear Information System (INIS)

    Williamson, A.D.; McDonough, S.E.

    1993-01-01

    The paper describes the results of a project commissioned by the State of Florida, in cooperation with the US Environmental Protection Agency, as one portion of the Florida Radon Research Program (FRRP). The purpose of the FRRP is to provide technical support for a statewide Building Standard for Radon-Resistant Construction currently in the rulemaking process. In this case the information provides technical background for a post-construction radon test specified as a performance element of the code which accompanies the prescriptive alternative that does not incorporate active radon reduction systems

  17. ANSI / FM Approvals 2510 flood abatement equipment test standard

    Directory of Open Access Journals (Sweden)

    Kravetz Frédéric

    2016-01-01

    Full Text Available Natural hazards, including flooding, continue to be the leading cause of commercial and industrial property damage worldwide. Until recently, there has been a limited amount of readily available guidance on choosing flood abatement protection. FM Approvals, a division of FM Global, one of the world’s largest business property insurers, working together with the Association of State Floodplain Managers and the US Army Corps of Engineers have developed a National Flood Barrier Test Program after recognizing the urgent demand for reliable flood abatement products to mitigate potential losses. This lead to the ANSI/ FM2510 flood abatement equipment standard.

  18. Key challenges for nanotechnology: Standardization of ecotoxicity testing.

    Science.gov (United States)

    Cerrillo, Cristina; Barandika, Gotzone; Igartua, Amaya; Areitioaurtena, Olatz; Mendoza, Gemma

    2017-04-03

    Nanotechnology is expected to contribute to the protection of the environment, but many uncertainties exist regarding the environmental and human implications of manufactured nanomaterials (MNMs). Contradictory results have been reported for their ecotoxicity to aquatic organisms, which constitute one of the most important pathways for their entrance and transfer throughout the food web. The present review is focused on the international strategies that are laying the foundations of the ecotoxicological assessment of MNMs. Specific advice is provided on the preparation of MNM dispersions in the culture media of the organisms, which is considered a key factor to overcome the limitations in the standardization of the test methodologies.

  19. Standard test method for measuring pH of soil for use in corrosion testing

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1995-01-01

    1.1 This test method covers a procedure for determining the pH of a soil in corrosion testing. The principle use of the test is to supplement soil resistivity measurements and thereby identify conditions under which the corrosion of metals in soil may be accentuated (see G 57 - 78 (1984)). 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  20. Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This specification provides means for classifying solar simulators intended for indoor testing of photovoltaic devices (solar cells or modules), according to their spectral match to a reference spectral irradiance, non-uniformity of spatial irradiance, and temporal instability of irradiance. 1.2 Testing of photovoltaic devices may require the use of solar simulators. Test Methods that require specific classification of simulators as defined in this specification include Test Methods E948, E1036, and E1362. 1.3 This standard is applicable to both pulsed and steady state simulators and includes recommended test requirements used for classifying such simulators. 1.4 A solar simulator usually consists of three major components: (1) light source(s) and associated power supply; (2) any optics and filters required to modify the output beam to meet the classification requirements in Section 4; and (3) the necessary controls to operate the simulator, adjust irradiance, etc. 1.5 A light source that does not mee...

  1. Sports physical

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000673.htm Sports physical To use the sharing features on this ... or routine checkups. Why do you Need a Sports Physical? The sports physical is done to: Find ...

  2. Team Sports

    Science.gov (United States)

    ... with Paralysis > Health > Staying active > Team sports Team sports ☷ ▾ Page contents Basketball Quad rugby Sled hockey Softball ... Basketball Basketball is probably the most well-developed sport for wheelchair users in the United States, for ...

  3. Validation of the short form-36 health survey supported with isokinetic strength testing after sport knee injury.

    Science.gov (United States)

    Marn-Vukadinovic, Dusa; Jamnik, Helena

    2011-08-01

    Valid patient-based outcome instruments are necessary for comprehensive patient care that focuses on all aspects of health, from impairments to participation restrictions. To validate the Slovenian translation of Medical Outcome Survey (MOS) Short Form Health Survey (SF-36) and to assess relations among various knee measurements, activity tested with Oxford Knee Score (OKS) and health-related quality of life as estimated with SF-36 domains. Descriptive validation study. Isokinetic laboratory in outpatient rehabilitation unit. 101 subjects after unilateral sport knee injury. All subjects completed the SF-36 and OKS, and isokinetic knee-muscle strength output at 60°/s was determined in 78 participants. Within a 3-d period, 43 subjects completed the SF-36 and OKS questionnaires again. Reliability testing included internal consistency and test-retest reliability. Correlations between SF-36 subscales and OKS were calculated to assess construct validity, and correlation between SF-36 subscales and muscle strength was calculated to assess concurrent validity. Chronbach α was above .78 for all SF-36 subscales. ICCs ranged from .80 to .93. The correlation between OKS and the physical-functioning subscale, showing convergent construct validity, was higher (r = .83, P social-functioning (r = -.43, P sport knee injury were established.

  4. Standard test method for conducting erosion tests by solid particle impingement using gas jets

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 This test method covers the determination of material loss by gas-entrained solid particle impingement erosion with jetnozzle type erosion equipment. This test method may be used in the laboratory to measure the solid particle erosion of different materials and has been used as a screening test for ranking solid particle erosion rates of materials in simulated service environments (1,2 ). Actual erosion service involves particle sizes, velocities, attack angles, environments, and so forth, that will vary over a wide range (3-5). Hence, any single laboratory test may not be sufficient to evaluate expected service performance. This test method describes one well characterized procedure for solid particle impingement erosion measurement for which interlaboratory test results are available. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determi...

  5. Standard test methods for notched bar impact testing of metallic materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 These test methods describe notched-bar impact testing of metallic materials by the Charpy (simple-beam) test and the Izod (cantilever-beam) test. They give the requirements for: test specimens, test procedures, test reports, test machines (see Annex A1) verifying Charpy impact machines (see Annex A2), optional test specimen configurations (see Annex A3), precracking Charpy V-notch specimens (see Annex A4), designation of test specimen orientation (see Annex A5), and determining the percent of shear fracture on the surface of broken impact specimens (see Annex A6). In addition, information is provided on the significance of notched-bar impact testing (see Appendix X2), methods of measuring the center of strike (see Appendix X2). 1.2 These test methods do not address the problems associated with impact testing at temperatures below -196 C (-320 F, 77 K). 1.3 The values stated in SI units are to be regarded as the standard. Inch-pound units are provided for information only. This standard does not purpor...

  6. SPORT NUTRITION KNOWLEDGE OF COACHES

    Directory of Open Access Journals (Sweden)

    Ivan Vasiljević

    2014-06-01

    Full Text Available Introduction: Decades of research support the theory that when there are sports competitions the question of what to eat and drink in order to enhance sport performance. Nutrition is one of the most important factors in achieving top performance athletes. According to most studies conducted in the world's top athletes receive information from their coaches when it comes to sports nutrition, especially of the coaches involved in fitness training. (Burns, Schiller, Merrick & Wolf, 2004.The aim of this study was to determine the knowledge of sports nutrition in sports coaching. Mthods: The sample was composed of 30 licensed coaches from Montenegro (football, handball, basketball, volleyball, athletics and tennis. Knowledge of sports nutrition was tested by means of a standardized questionnaire. The questionnaire was designed to determine the knowledge manager on sports nutrition, the ingredients that are necessary in order to provide a sufficient amount of energy to training and competition, the dietary supplements, meal prior to the competition as well as dehydration and rehydration during training and competition. The survey was anonymous. The data were analyzed by statistical methods, using the statistical software STATISTICA for WINDOWS. Results: According to the results as a whole, it can be concluded that the trainer's knowledge of sports nutrition at a satisfactory level. Out of 600 responses was achieved 469 correct answers, or 78.1%. However, when looking at individual responses then satisfaction with the relative high percentage loss since the observed large gaps on very important issues related to sports nutrition. Discussion: By analyzing and comparing research results (Matkovic, Prince & Cigrovski, 2006 that in a sample of 56 coaches basketball and skiing, received 77.8% of correct answers and insight into the results of our study, it is clear that the results of the approximate value of both work, which is an indicator of quality

  7. Background Variables, Levels of Aggregation, and Standardized Test Scores

    Directory of Open Access Journals (Sweden)

    Sharon E. Paulson

    2009-12-01

    Full Text Available This article examines the role of student demographic characteristics in standardized achievement test scores at both the individual level and aggregated at the state, district, school levels. For several data sets, the majority of the variance among states, districts, and schools was related to demographic characteristics. Where these background variables outside of the control of schools significantly affected averaged scores, and test scores result in high stakes consequences, benefits and sanctions may be inappropriately applied. Furthermore, disaggregating the data by race, SES, limited English, or other groupings ignores the significant confounding and cumulative effects of belonging to more than one disadvantaged group. With these approaches to evaluation being fundamental to the No Child Left Behind mandates, the danger of misinterpretation and inappropriate application of sanctions is substantial.

  8. Filtration: Novel Absorber Evaluation Club aims at standardized testing

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    In the past few years a number of novel absorber materials, both organic and inorganic, have appeared on the market - some claiming to achieve very large decontamination factors for metal ions, including those having radioactive isotopes. Several of these materials have been tested by individual companies in the nuclear industry and some have shown promise as decontaminants for radioactive waste streams. Unfortunately, the results obtained for the treatment of a particular waste stream cannot be applied directly to the many and diverse waste streams generated throughout the nuclear industry. A unified and standardized testing programme making use of available expertise is necessary to provide a fair and meaningful comparison. In November 1988, representatives of the United Kingdom nuclear industry agreed to form the Novel Absorber Evaluation Club to assess absorber materials and to undertake the necessary work to identify the extent and rate of adsorption of radionuclides by such materials from a set of typical reference waste streams. (author)

  9. Sport tourism

    OpenAIRE

    Eva Schwartzhoffová

    2010-01-01

    Sport tourism is one specific type of travel and tourism. The goal of this article is to introduce the definition and importance of sport tourism to academic and sports professionals. At present, sport tourism is a diverse social, economic and cultural phenomenon arising from the unique interaction of activity, people and place. The second part of this article reports about sports events as an important part of sport tourism.

  10. Tests of the standard model and searches for new physics

    Energy Technology Data Exchange (ETDEWEB)

    Langacker, Paul [Pennsylvania Univ., PA (United States). Dept. of Physics

    1996-07-01

    Earlier chapters of this volume have detailed described the standard model and its renormalization, the various types of precision experiments, and their implications. This chapter is devoted to global analysis of the Z-pole, M{sub W}, and neutral current data, which contains more information that any one class of experiments. The subsequent sections will summarize some of the relevant data and theoretical formulas, the status of the standard model tests and parameter determinations, the possible classes of new physics, and the implications of the precision experiments. In particular, the model independent analysis of neutral current couplings, which establishes the standard model to first approximation; the implication of supersymmetry; supersymmetric grand unification; and a number if specific types of new physics, including heavy Z{sup '} bosons, new sources of SU{sub 2} breaking, new contributions to the gauge boson self-energies, Zb b-bar vertex corrections, certain types of new 4-Fermi operators and leptoquarks, and the exotic fermions are described.

  11. Stress-testing the Standard Model at the LHC

    CERN Document Server

    2016-01-01

    With the high-energy run of the LHC now underway, and clear manifestations of beyond-Standard-Model physics not yet seen in data from the previous run, the search for new physics at the LHC may be a quest for small deviations with big consequences. If clear signals are present, precise predictions and measurements will again be crucial for extracting the maximum information from the data, as in the case of the Higgs boson. Precision will therefore remain a key theme for particle physics research in the coming years. The conference will provide a forum for experimentalists and theorists to identify the challenges and refine the tools for high-precision tests of the Standard Model and searches for signals of new physics at Run II of the LHC. Topics to be discussed include: pinning down Standard Model corrections to key LHC processes; combining fixed-order QCD calculations with all-order resummations and parton showers; new developments in jet physics concerning jet substructure, associated jets and boosted je...

  12. Standard test methods for bend testing of metallic flat materials for spring applications involving static loading

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This standard describes three test methods for determining the modulus of elasticity in bending and the bending strength of metallic strips or sheets intended for the use in flat springs: 1.1.1 Test Method A—a cantilever beam, 1.1.2 Test Method B—a three-point loaded beam (that is, a beam resting on two supports and centrally loaded), and 1.1.3 Test Method C—a four-point loaded beam (that is, a beam resting on two supports and loaded at two points equally spaced from each support). 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 6.1 This test me...

  13. Standard test method for wear testing with a pin-on-disk apparatus

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This test method covers a laboratory procedure for determining the wear of materials during sliding using a pin-on-disk apparatus. Materials are tested in pairs under nominally non-abrasive conditions. The principal areas of experimental attention in using this type of apparatus to measure wear are described. The coefficient of friction may also be determined. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  14. Standard test method for pin-type bearing test of metallic materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1984-01-01

    1.1 This test method covers a pin-type bearing test of metallic materials to determine bearing yield strength and bearing strength. Note 1—The presence of incidental lubricants on the bearing surfaces may significantly lower the value of bearing yield strength obtained by this method. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  15. Standard test methods for elevated temperature tension tests of metallic materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 These test methods cover procedure and equipment for the determination of tensile strength, yield strength, elongation, and reduction of area of metallic materials at elevated temperatures. 1.2 Determination of modulus of elasticity and proportional limit are not included. 1.3 Tension tests under conditions of rapid heating or rapid strain rates are not included. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  16. Standard Test Method for Measuring Binocular Disparity in Transparent Parts

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method covers the amount of binocular disparity that is induced by transparent parts such as aircraft windscreens, canopies, HUD combining glasses, visors, or goggles. This test method may be applied to parts of any size, shape, or thickness, individually or in combination, so as to determine the contribution of each transparent part to the overall binocular disparity present in the total “viewing system” being used by a human operator. 1.2 This test method represents one of several techniques that are available for measuring binocular disparity, but is the only technique that yields a quantitative figure of merit that can be related to operator visual performance. 1.3 This test method employs apparatus currently being used in the measurement of optical angular deviation under Method F 801. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not con...

  17. Aligning English grammar testing with European language standards

    Directory of Open Access Journals (Sweden)

    Bodrič Radmila

    2015-01-01

    Full Text Available In recent years, foreign language testing has gained in significance with the advent of The Common European Framework of Reference for Languages (2001 (CEFR, a European language document which set comparable standards for learning, teaching and assessing foreign languages. The CEFR was used to set the research aim of this paper - testing grammar at level B2. The main aim of the research was to determine grammatical competence at level B2 and additional aims included: (a determining which particular areas of grammar need to be learned by students at level B2, (b formulating grammatical descriptors for each individual area of grammar, (c determining the test’s threshold level which would fulfil the criteria for grammatical competence at level B2, and (d determining the extent to which students have mastered the given areas. The pre-testing was followed by the main testing on the sample of 164 students in two secondary schools. The results indicated that the quantity and quality of grammatical competence was lower than expected: 47% of the population failed to fulfil the basic level of grammatical competence. The causes may be attributed to the factors of a subjective and objective nature. Level B2 is demanding qualitatively as well as quantitatively, regarding both the formal and the functional complexity and scope of language use, which requires intensive language production, high levels of motivation and sound working habits in order to master the given grammatical structures.

  18. Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2002-01-01

    1.1 This test method covers the determination of the stability in storage, of liquid, water-base chemical cleaning compounds, used to clean the exterior surfaces of aircraft. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  19. An Ecological Study of Anterior Cruciate Ligament Reconstruction, Part 2: Functional Performance Tests Correlate With Return-to-Sport Outcomes.

    Science.gov (United States)

    McGrath, Timothy M; Waddington, Gordon; Scarvell, Jennie M; Ball, Nick; Creer, Rob; Woods, Kevin; Smith, Damian; Adams, Roger

    2017-02-01

    Additional high-quality prospective studies are needed to better define the objective criteria used in relation to return-to-sport decisions after anterior cruciate ligament (ACL) reconstruction in active populations. To investigate prospectively the relationship between functional performance test results at 24 weeks postoperative and return-to-sport activity (Tegner activity score) at 12 and 24 months, respectively, after synthetic (ligament advanced reinforcement system [LARS]) and autograft (doubled semitendinosus/gracilis [2ST/2GR]) ACL reconstructions. Case series; Level of evidence, 4. A total of 64 patients who underwent ACL reconstruction (32 LARS, 32 2ST/2GR autograft; mean age, 27.9 years; body mass index [BMI], 24.9 kg/m 2 ) were assessed preoperatively and at staged intervals postoperatively up to 24 weeks for isokinetic testing of quadriceps and hamstring average power per repetition at 60 deg/s and 180 deg/s, a battery of hop tests, peak vertical ground-reaction force (vGRF), and time to peak vGRF (in seconds) during a step- and jump-down task onto a force platform and peak speed (m/s) using a global positioning system (GPS unit) during a running task. A cohort of 32 healthy matched participants (mean age, 26.31 years; BMI, 25.7 kg/m 2 ) were also tested to act as reference. Pearson correlation was calculated to assess correlation of each performance measure at 24 weeks postoperative with activity outcomes (Tegner score) at 12 and 24 months. The strongest correlation between physical performance tests and return-to-sport outcomes was observed with peak speed during running. Large correlations were also observed for hamstring isokinetic power and hop test for distance. Moderate correlations were observed for timed hop, peak vGRF during a jump-down task, and quadriceps isokinetic power. No statistical correlations were observed for time to peak vGRF during a step-down and jump-down task as well as peak vGRF during a step-down task. When the performance

  20. Standard Test Method for Hydrophobic Surface Films by the Water-Break Test

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2002-01-01

    1.1 This test method covers the detection of the presence of hydrophobic (nonwetting) films on surfaces and the presence of hydrophobic organic materials in processing ambients. When properly conducted, the test will enable detection of molecular layers of hydrophobic organic contaminants. On very rough or porous surfaces, the sensitivity of the test may be significantly decreased. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  1. Standard Test Method for Hydrophobic Surface Films by the Atomizer Test

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1965-01-01

    1.1 This test method covers the detection of the presence of hydrophobic (nonwetting) films on surfaces and the presence of hydrophobic organic materials in processing ambients. When properly conducted, the test will enable detection of fractional molecular layers of hydrophobic organic contaminants. On very rough or porous surfaces the sensitivity of the test may be significantly decreased. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  2. Standard test method for tension testing of structural alloys in liquid helium

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method describes procedures for the tension testing of structural alloys in liquid helium. The format is similar to that of other ASTM tension test standards, but the contents include modifications for cryogenic testing which requires special apparatus, smaller specimens, and concern for serrated yielding, adiabatic heating, and strain-rate effects. 1.2 To conduct a tension test by this standard, the specimen in a cryostat is fully submerged in normal liquid helium (He I) and tested using crosshead displacement control at a nominal strain rate of 10−3 s−1 or less. Tests using force control or high strain rates are not considered. 1.3 This standard specifies methods for the measurement of yield strength, tensile strength, elongation, and reduction of area. The determination of the elastic modulus is treated in Test Method E 111. Note 1—The boiling point of normal liquid helium (He I) at sea level is 4.2 K (−269°C or −452.1°F or 7.6°R). It decreases with geographic elevation and is...

  3. Performance on the modified star excursion balance test at the time of return to sport following anterior cruciate ligament reconstruction.

    Science.gov (United States)

    Clagg, Sarah; Paterno, Mark V; Hewett, Timothy E; Schmitt, Laura C

    2015-06-01

    Cross-sectional. Objectives To compare performance on the modified Star Excursion Balance Test (SEBT) between participants with anterior cruciate ligament reconstruction (ACLR) at the time of return to sport and uninjured control participants. The modified SEBT is a clinical tool to assess neuromuscular control deficits. Deficits in dynamic stability and neuromuscular control persist after ACLR, but assessment with the modified SEBT in this population at the time of return to sport has not been reported. Sixty-six participants (mean age, 17.6 years) at the time of return to sport following unilateral primary ACLR (ACLR group) and 47 uninjured participants (mean age, 17.0 years) serving as a control group participated. For the modified SEBT, the anterior, posteromedial, and posterolateral reach distances were recorded. Lower extremity muscle strength was quantified with isokinetic dynamometry. Independent-sample t tests were used to evaluate performance differences between the ACLR group and the control group and between the ACLR subgroups. In the ACLR group, bivariate correlations determined the association of modified SEBT performance with time since surgery and lower extremity muscle strength. The ACLR group had lower anterior reach distances on the involved and uninvolved limbs compared to the control group. There were no differences observed between groups in reach distances for the posteromedial and posterolateral directions or in limb symmetry indices for any of the reach directions. In the ACLR group, time from surgery and meniscal status at the time of ACLR did not influence modified SEBT performance, whereas participants with patellar bone-tendon-bone grafts had a lower posterolateral reach distance compared to those with hamstring grafts. In the ACLR group, involved-limb hip abduction strength positively correlated with all reach distances, and quadriceps strength positively correlated with posterolateral reach. At the time of return to sport

  4. The Current State of Pediatric Sports Medicine: A Workforce Analysis.

    Science.gov (United States)

    Engelman, Glenn; Koutures, Chris; Provance, Aaron

    2016-01-01

    Pediatric sports medicine is an evolving pediatric subspecialty. No workforce data currently exists describing the current state of pediatric sports medicine. The goal of this survey is to contribute information to the practicing pediatric sports medicine specialist, employers and other stakeholders regarding the current state of pediatric sports medicine. The Workforce Survey was conducted by the American Academy of Pediatrics (AAP) Division of Workforce and Medical Education Policy (WMEP) and included a 44-item standard questionnaire online addressing training, clinical practice and demographic characteristics as well as the 24-item AAP Council on Sports Medicine and Fitness (COSMF) questionnaire. Descriptive statistics were used to summarize all survey responses. Bivariate relationships were tested for statistical significance using Chi square. 145 surveys were returned, which represented a 52.7% response rate for eligible COSMF members and board certified non-council responders. The most common site of employment among respondents was university-based clinics. The respondents board certified in sports medicine were significantly more likely to perform fracture management, casting and splinting, neuropsychological testing and injections compared to those not board certified in sports medicine. A large proportion of respondents held an academic/medical school appointment. Increases were noted in both patient volume and the complexity of the injuries the specialists were treating. This pediatric sports medicine workforce study provides previously unappreciated insight into practice arrangements, weekly duties, procedures, number of patients seen, referral patterns, and potential future trends of the pediatric sports medicine specialist.

  5. SPORT MARKETING

    Directory of Open Access Journals (Sweden)

    Omer Špirtović

    2010-03-01

    Full Text Available Word „marketing“ comes from AngloSaxon linguistic domain and implies in a narrow sense the market. Under marketing, we consider certain process, which should create and solve relations of exchange between manufacturers on one side, and consumers on the other. Discussion about sport marketing implies its theoretical definition and generalization, and then its actual definition in sport environment. Sport marketing belongs to business function of sport organization and represents primaly an economical process of connecting produktion (sport organizations with sportsmen and coaches and consumption (sport and other public. Sport marketing is the reality in sport today, and cannot be observed as fashionabless of capitalistic production. Today is almost impossible for sport organization to make business without its business part called sport marketing if it wants to survive in sport arena.

  6. Standard test method for guided bend test for ductility of welds

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2002-01-01

    1.1 This test method covers a guided bend test for the determination of soundness and ductility of welds in ferrous and nonferrous products. Defects, not shown by X rays, may appear in the surface of a specimen when it is subjected to progressive localized overstressing. This guided bend test has been developed primarily for plates and is not intended to be substituted for other methods of bend testing. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 1—For additional information see Terminology E 6, and American Welding Society Standard D 1.1. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  7. Standard test method for K-R curve determination

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This test method covers the determination of the resistance to fracture of metallic materials under Mode I loading at static rates using either of the following notched and precracked specimens: the middle-cracked tension M(T) specimen or the compact tension C(T) specimen. A K-R curve is a continuous record of toughness development (resistance to crack extension) in terms of KR plotted against crack extension in the specimen as a crack is driven under an increasing stress intensity factor, K. 1.2 Materials that can be tested for K-R curve development are not limited by strength, thickness, or toughness, so long as specimens are of sufficient size to remain predominantly elastic to the effective crack extension value of interest. 1.3 Specimens of standard proportions are required, but size is variable, to be adjusted for yield strength and toughness of the materials. 1.4 Only two of the many possible specimen types that could be used to develop K-R curves are covered in this method. 1.5 The test is app...

  8. Evaluar la Coordinación Motriz Global en Educación Secundaria: El Test Motor SportComp. [Motor co-ordination assessment in Secondary Education: The SportComp Test].

    Directory of Open Access Journals (Sweden)

    Luis Miguel Ruiz-Perez

    2017-07-01

    Full Text Available El objetivo de este estudio fue el desarrollo y evaluación métrica del Test Motor SportComp, instrumento diseñado para ayudar a los profesores de educación física en la evaluación de la coordinación motriz global de sus alumnos de Educación Secundaria. En la actualidad no existen tests que evalúen la coordinación motriz de forma válida y fiable y que puedan ser empleados por el profesorado de educación física en el contexto de sus clases de manera rápida y económica. El presente test se construyó a partir de una revisión de la literatura científica sobre medición motriz entre los 12 y 17 años. La validez de contenido de las pruebas empleadas fue evaluada por expertos y las pruebas seleccionadas fueron aplicadas a 5732 escolares de estas edades. Se analizaron los resultados mediante la técnica de componentes principales que permitió la extracción de un solo factor formado por 5 tareas motrices relacionadas con la coordinación motriz global. El Coeficiente de Correlación Intraclase (CCI permitió obtener una fiabilidad test-retest de (CCI=0,91. Asimismo, mostró una satisfactoria validez criterial con la batería MABC-2 uno de los más reconocidos para la detección de problemas de coordinación motriz. Las propiedades métricas del presente test son muy satisfactorias y ofrecen buenas posibilidades para ser empleado por los profesores de educación física en sus clases por su bajo coste económico, poco tiempo de aplicación reclamado y poseer normas ajustadas por edad y sexo. Asimismo, este test ofrece el potencial de poder servir para detectar a los alumnos con sospecha de poseer problemas de coordinación motriz y por lo tanto contribuir a la mejora de los programas de educación física que palíen esta condición. Abstract The purpose of this study was the development and metric evaluation of the SportComp Motor Test, an instrument designed to aid physical education teachers in the assessment of gross motor

  9. The Weighted Airman Promotion System: Standardizing Test Scores

    Science.gov (United States)

    2008-01-01

    u th o ri ze d Top 3/E6 ratio, inventory 1401206040 100 70 130 5R 2F 2G 3N 2M 2A 4J 4C 4P 4T 4B 1W 2T 3P 1T 4A 2S 5J 1A 1S1C 6F 4N 7S 4R 4E 1N 3A 3V...Costs If the Air Force decided to standardize test scores, there would be three basic types of costs: implementation costs, marketing costs, and...analytical costs for this more deliberate approach could be three to four person-years. It would be appropriate for the Air Force to market any

  10. The NASA Short-term Prediction and Research Transition (SPoRT) Center: A Research to Operations Test Bed

    Science.gov (United States)

    Jedlovec, Gary J.

    2005-01-01

    to the Florida coastal WFOs. A SPoRT Test bed, together with input from other interagency and university partners, will provide a means and a process to effectively transition ESE observations and technology to NWS operations and decision makers at both the globdnational and regional scales. The transition of emerging experimental products into operations through the SPoRT infrastructure will allow NASA to foster and accelerate the progress of this Science Mission Directorate research strategy over the coming years.

  11. ORDER IN THE CHAOS IN SPORTS ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    Azarian Mehran

    2014-08-01

    Full Text Available Purpose: Nowadays, scientists consider the world as a combination of some systems that work in a self -organizing way and the result of such a way is unpredictable and accidential states. Compulsory Natural rules are affective in such circumstances. Also it is known that systems work in a circular form in which order ends in disorder and vice versa. The idea of world as something simple has already replaced by a complicated and contradictory world. The study aim is to survey chaordic organizations characters of sport organizations. Materials and methods : For this purpose we used a standard questionnaire with appropriate reliability and validity. The statistical population of the study are whole staff of sport and youth head-quarter of west Azarbaijan province that are 89 (sample number is equal to the population's. We used Kolmogrov- Smirnov test to study data normal distribution, and in respect of normal distribution of data to test hypothesis we used sample t test and also descriptive statistical methods like mean and standard deviation, through SPSS 18. Questionnaires were filled out by whole staff of sport and youth head-quarters of west Azarbaijan province. Results: Results of this study, which have got through a single-sample t-test, show that sport organizations have six characteristics of welcoming to innovation, coherence, uncertainty, non-linearity, unpredictability, and ugly structure. It’s just the grade of the characteristic of recruiting competent staffs that is low in sport organizations; in fact they don’t enjoy it. But, within assessing the main hypothesis of the research that was around the feature of chaos-order, it was resulted that sport organizations have characteristics of a chaos-order organization and they can be considered as a chaos-order organization. Conclusions: According to the results of this study and t-table we can deduce that sport organizations are chaordic organization.

  12. Analysis of Baseline Computerized Neurocognitive Testing Results among 5–11-Year-Old Male and Female Children Playing Sports in Recreational Leagues in Florida

    Directory of Open Access Journals (Sweden)

    Karen D. Liller

    2017-09-01

    Full Text Available There is a paucity of data related to sports injuries, concussions, and computerized neurocognitive testing (CNT among very young athletes playing sports in recreational settings. The purpose of this study was to report baseline CNT results among male and female children, ages 5–11, playing sports in Hillsborough County, Florida using ImPACT Pediatric, which is specifically designed for this population. Data were collected from 2016 to 2017. The results show that 657 baseline tests were conducted and t-tests and linear regression were used to assess mean significant differences in composite scores with sex and age. Results showed that females scored better on visual memory and in general as age increased, baseline scores improved. The results can be used to build further studies on the use of CNT in recreational settings and their role in concussion treatment, management, and interventions.

  13. Analysis of Baseline Computerized Neurocognitive Testing Results among 5-11-Year-Old Male and Female Children Playing Sports in Recreational Leagues in Florida.

    Science.gov (United States)

    Liller, Karen D; Morris, Barbara; Fillion, Jessica; Yang, Yingwei; Bubu, Omonigho M

    2017-09-07

    There is a paucity of data related to sports injuries, concussions, and computerized neurocognitive testing (CNT) among very young athletes playing sports in recreational settings. The purpose of this study was to report baseline CNT results among male and female children, ages 5-11, playing sports in Hillsborough County, Florida using ImPACT Pediatric, which is specifically designed for this population. Data were collected from 2016 to 2017. The results show that 657 baseline tests were conducted and t-tests and linear regression were used to assess mean significant differences in composite scores with sex and age. Results showed that females scored better on visual memory and in general as age increased, baseline scores improved. The results can be used to build further studies on the use of CNT in recreational settings and their role in concussion treatment, management, and interventions.

  14. Underwater noise from geotechnical drilling and standard penetration testing.

    Science.gov (United States)

    Erbe, Christine; McPherson, Craig

    2017-09-01

    Geotechnical site investigations prior to marine construction typically involve shallow, small-core drilling and standard penetration testing (SPT), during which a small tube is hammered into the ground at the bottom of the borehole. Drilling (120 kW, 83 mm diameter drillbit, 1500 rpm, 16-17 m drill depth in sand and mudstone) and SPT (50 mm diameter test tube, 15 mm wall thickness, 100 kg hammer, 1 m drop height) by a jack-up rig in 7-13 m of water were recorded with a drifting hydrophone at 10-50 m range. Source levels were 142-145 dB re 1 μPa rms @ 1 m (30-2000 Hz) for drilling and 151-160 dB re 1 μPa 2 s @ 1 m (20-24 000 Hz) for SPT.

  15. Working on a Standard Joint Unit: A pilot test.

    Science.gov (United States)

    Casajuana, Cristina; López-Pelayo, Hugo; Mercedes Balcells, María; Miquel, Laia; Teixidó, Lídia; Colom, Joan; Gual, Antoni

    2017-09-29

    Assessing cannabis consumption remains complex due to no reliable registration systems. We tested the likelihood of establishing a Standard Joint Unit (SJU) which considers the main cannabinoids with implication on health through a naturalistic approach.  Methodology. Pilot study with current cannabis users of four areas of Barcelona: universities, nightclubs, out-patient mental health service, and cannabis associations. We designed and administered a questionnaire on cannabis use-patterns and determined the willingness to donate a joint for analysis. Descriptive statistics were used to analyze the data. Forty volunteers answered the questionnaire (response rate 95%); most of them were men (72.5%) and young adults (median age 24.5 years; IQR 8.75 years) who consume daily or nearly daily (70%). Most participants consume marihuana (85%) and roll their joints with a median of 0.25 gr of marihuana. Two out of three (67.5%) stated they were willing to donate a joint. Obtaining an SJU with the planned methodology has proved to be feasible. Pre-testing resulted in an improvement of the questionnaire and retribution to incentivize donations. Establishing an SJU is essential to improve our knowledge on cannabis-related outcomes.

  16. Pilot test of ANSI draft standard N13.29 environmental dosimetry -- Performance criteria for testing

    Energy Technology Data Exchange (ETDEWEB)

    Klemic, G.; Shebell, P.; Monetti, M.; Raccah, F. [Dept. of Energy, New York, NY (United States). Environmental Measurement Lab.; Shobe, J.; Lamperti, P.; Soares, C. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Sengupta, S. [Brookhaven National Lab., Upton, NY (United States)

    1998-09-01

    American National Standards Institute Draft N13.29 describes performance tests for environmental radiation dosimetry providers. If approved it would be the first step toward applying the types of performance testing now required in personnel dosimetry to environmental radiation monitoring. The objective of this study was to pilot test the draft standard, before it undergoes final balloting, on a small group of dosimetry providers that were selected to provide a mix of facility types, thermoluminescent dosimeter designs and monitoring program applications. The first phase of the pilot test involved exposing dosimeters to laboratory photon, beta, and x-ray sources at routine and accident dose levels. In the second phase, dosimeters were subjected to ninety days of simulated environmental conditions in an environmental chamber that cycled through extremes of temperature and humidity. Two out of seven participants passed all categories of the laboratory testing phase, and all seven passed the environmental test phase. While some relatively minor deficiencies were uncovered in the course of the pilot test, the results show that draft N13.29 describes useful tests that could be appropriate for environmental dosimetry providers. An appendix to this report contains recommendations that should be addressed by the N13.29 working group before draft N13.29 is submitted for balloting.

  17. Sport Marketing

    OpenAIRE

    Ekmekci, Ridvan; Ekmekçi, Aytul Yeter

    2009-01-01

    Abstract  Marketing which is entered to almost our whole life, now more than goods and services, became an important  concept of ideas, persons, institutions, events, and facilities. As a main activities of business co. marketing has an important place in sports industry. Recently, the development of special sport marketing strategies and the presentation of sport goods and services to consumers are gaining importance. Efforts of increasing income of sport clubs, because of sport organization...

  18. Sport Toekomstverkenning

    OpenAIRE

    Marieke van Bakel; Ine Pulles; Annet Tiessen-Raaphorst; Frank den Hertog; Robert Vonk; Casper Schoemaker

    2017-01-01

    Deze publicatie verschijnt enkel digitaal op www.sporttoekomstverkenning.nl. Welke maatschappelijke veranderingen beïnvloeden de sport in Nederland? Waar gaat het heen met de sport tussen nu en 2040? Welke kansen, maar ook keuzes biedt dit voor de sportsector en het sportbeleid? Deze vragen staan centraal in deze toekomstverkenning over sport die werd uitgevoerd door het RIVM en het SCP, op verzoek van het ministerie van Volksgezondheid, Welzijn en Sport (VWS). In de Sport Toekomstverken...

  19. Determining the protective function of sports footwear.

    Science.gov (United States)

    Lake, M J

    2000-10-01

    To reduce the risk of injury associated with foot-ground interaction during sporting activities, there is a need for adequate assessment of the protective function of sports footwear. The present objectives are to review the typical biomechanical approaches used to identify protection offered by sports footwear during dynamic activities and to outline some of the recent methodological approaches aimed at improving this characterization. Attention is focused on biomechanical techniques that have been shown to best differentiate safety features of footwear. It was determined that subject tests would be used in combination with standard mechanical techniques to evaluate footwear protection. Impact attenuation characteristics of footwear during sporting activities were most distinguished by analysis of tibial shock signals in the frequency and joint time-frequency domains. It has been argued that lateral stability and traction properties of footwear are better assessed using game-like manoeuvres of subjects on the actual sporting surface. Furthermore, the ability of such tests to discriminate between shoes has been improved through methods aimed at reducing or accounting for variability in individual execution of dynamic manoeuvres. Advances in tools allowing measurement of dynamic foot function inside the shoe also aid our assessment of shoe protective performance. In combination, these newer approaches should provide more information for the design of safer sports footwear.

  20. Sports officials and officiating : Science and practice

    NARCIS (Netherlands)

    MacMahon, Clare; Mascarenhas, Duncan; Plessner, Henning; Pizzera, Alexandra; Oudejans, Raôul R D; Raab, Markus

    2014-01-01

    Sports officials (umpires, referees, judges) play a vital role in every sport, and sports governing bodies, fans, and players now expect officials to maintain higher professional standards than ever before. In this ground-breaking book, a team of leading international sport scientists and top level

  1. Sports Tourism

    Directory of Open Access Journals (Sweden)

    Gozalova Marina

    2014-07-01

    Full Text Available Introduction. This article is devoted to sports tourism. The purpose of this article is to examine theoretical material on sports tourism, to analyze sports tourism in Russia and to search for promising areas for the study of sports tourism in our country. Material and methods. In this part the authors develop the idea of the role of doing sports and keeping fit. For anyone who really wants to be healthy, fitness has become an integral part of their lives. Results. The purpose of this research is to study theoretical material on sports tourism, to analyze sports tourism in Russia and to search for promising areas for the study of sports tourism in our country. On the basis of their research the authors come to the conclusion that sports and tourism are interconnected. There are important factors affecting the situation of sports tourism in Russia. The paper examines sports tourism attractions in Russia. Conclusion. The authors conclude that there exists a high correlation dependence of foreign and domestic development of sports tourism on resources allocated for sports infrastructure. All in all, sports tourism tours draw visitors to their favorite sporting event, facility, or destination throughout the world.

  2. Development of the Test Of Astronomy STandards (TOAST) Assessment Instrument

    Science.gov (United States)

    Slater, Timothy F.; Slater, S. J.

    2008-05-01

    Considerable effort in the astronomy education research (AER) community over the past several years has focused on developing assessment tools in the form of multiple-choice conceptual diagnostics and content knowledge surveys. This has been critically important in advancing the AER discipline so that researchers could establish the initial knowledge state of students as well as to attempt measure some of the impacts of innovative instructional interventions. Unfortunately, few of the existing instruments were constructed upon a solid list of clearly articulated and widely agreed upon learning objectives. This was not done in oversight, but rather as a result of the relative youth of AER as a discipline. Now that several important science education reform documents exist and are generally accepted by the AER community, we are in a position to develop, validate, and disseminate a new assessment instrument which is tightly aligned to the consensus learning goals stated by the American Astronomical Society - Chair's Conference on ASTRO 101, the American Association of the Advancement of Science's Project 2061 Benchmarks, and the National Research Council's National Science Education Standards. In response, researchers from the Cognition in Astronomy, Physics and Earth sciences Research (CAPER) Team at the University of Wyoming's Science & Math Teaching Center (UWYO SMTC) have designed a criterion-referenced assessment tool, called the Test Of Astronomy STandards (TOAST). Through iterative development, this instrument has a high degree of reliability and validity for instructors and researchers needing information on students’ initial knowledge state at the beginning of a course and can be used, in aggregate, to help measure the impact of course-length duration instructional strategies for courses with learning goals tightly aligned to the consensus goals of our community.

  3. Refractory Metal Heat Pipe Life Test - Test Plan and Standard Operating Procedures

    Science.gov (United States)

    Martin, J. J.; Reid, R. S.

    2010-01-01

    Refractory metal heat pipes developed during this project shall be subjected to various operating conditions to evaluate life-limiting corrosion factors. To accomplish this objective, various parameters shall be investigated, including the effect of temperature and mass fluence on long-term corrosion rate. The test series will begin with a performance test of one module to evaluate its performance and to establish the temperature and power settings for the remaining modules. The performance test will be followed by round-the-clock testing of 16 heat pipes. All heat pipes shall be nondestructively inspected at 6-month intervals. At longer intervals, specific modules will be destructively evaluated. Both the nondestructive and destructive evaluations shall be coordinated with Los Alamos National Laboratory. During the processing, setup, and testing of the heat pipes, standard operating procedures shall be developed. Initial procedures are listed here and, as hardware is developed, will be updated, incorporating findings and lessons learned.

  4. The OSU Hydro-Mechanical Fuel Test Facility: Standard Fuel Element Testing

    Energy Technology Data Exchange (ETDEWEB)

    Wade R. Marcum; Brian G. Woods; Ann Marie Phillips; Richard G. Ambrosek; James D. Wiest; Daniel M. Wachs

    2001-10-01

    Oregon State University (OSU) and the Idaho National Laboratory (INL) are currently collaborating on a test program which entails hydro-mechanical testing of a generic plate type fuel element, or standard fuel element (SFE), for the purpose of qualitatively demonstrating mechanical integrity of uranium-molybdenum monolithic plates as compared to that of uranium aluminum dispersion, and aluminum fuel plates due to hydraulic forces. This test program supports ongoing work conducted for/by the fuel development program and will take place at OSU in the Hydro-Mechanical Fuel Test Facility (HMFTF). Discussion of a preliminary test matrix, SFE design, measurement and instrumentation techniques, and facility description are detailed in this paper.

  5. Standardized Testing Program for Solid-State Hydrogen Storage Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Michael A. [Southwest Research Institute; Page, Richard A. [Southwest Research Institute

    2012-07-30

    In the US and abroad, major research and development initiatives toward establishing a hydrogen-based transportation infrastructure have been undertaken, encompassing key technological challenges in hydrogen production and delivery, fuel cells, and hydrogen storage. However, the principal obstacle to the implementation of a safe, low-pressure hydrogen fueling system for fuel-cell powered vehicles remains storage under conditions of near-ambient temperature and moderate pressure. The choices for viable hydrogen storage systems at the present time are limited to compressed gas storage tanks, cryogenic liquid hydrogen storage tanks, chemical hydrogen storage, and hydrogen absorbed or adsorbed in a solid-state material (a.k.a. solid-state storage). Solid-state hydrogen storage may offer overriding benefits in terms of storage capacity, kinetics and, most importantly, safety.The fervor among the research community to develop novel storage materials had, in many instances, the unfortunate consequence of making erroneous, if not wild, claims on the reported storage capacities achievable in such materials, to the extent that the potential viability of emerging materials was difficult to assess. This problem led to a widespread need to establish a capability to accurately and independently assess the storage behavior of a wide array of different classes of solid-state storage materials, employing qualified methods, thus allowing development efforts to focus on those materials that showed the most promise. However, standard guidelines, dedicated facilities, or certification programs specifically aimed at testing and assessing the performance, safety, and life cycle of these emergent materials had not been established. To address the stated need, the Testing Laboratory for Solid-State Hydrogen Storage Technologies was commissioned as a national-level focal point for evaluating new materials emerging from the designated Materials Centers of Excellence (MCoE) according to

  6. Doping control in sport

    DEFF Research Database (Denmark)

    Overbye, Marie Birch

    2016-01-01

    Doping testing is a key component enforced by anti-doping authorities to detect and deter doping in sport. Policy is developed to protect athletes' right to participate in doping-free sport; and testing is a key tool to secure this right. Accordingly, athletes' responses to anti-doping efforts.......e., the efforts of stakeholders involved in testing) in their own sport both nationally and worldwide. Moreover, it seeks to identify whether specific factors such as previous experience of testing and perceived proximity of doping have an impact on athletes' perceptions of the testing system. The study comprises...... a web-based questionnaire (N = 645; response rate 43%) and uses qualitative findings to elaborate on and explain quantitative results. Results showed that two-thirds of the athletes reported the national testing programme in their sport to be appropriate. A majority of the athletes who had an opinion...

  7. [Precautions of physical performance requirements and test methods during product standard drafting process of medical devices].

    Science.gov (United States)

    Song, Jin-Zi; Wan, Min; Xu, Hui; Yao, Xiu-Jun; Zhang, Bo; Wang, Jin-Hong

    2009-09-01

    The major idea of this article is to discuss standardization and normalization for the product standard of medical devices. Analyze the problem related to the physical performance requirements and test methods during product standard drafting process and make corresponding suggestions.

  8. Sports Specialization is Associated with An Increased Risk of Developing Anterior Knee Pain in Adolescent Female Athletes

    Science.gov (United States)

    Hall, Randon; Foss, Kim Barber; Hewett, Timothy E.; Myer, Gregory D.

    2014-01-01

    Objectives This study sought to determine if sport specialization increases the risk of anterior knee pain in adolescent female athletes. Design Retrospective cohort epidemiology study. Methods Female basketball, soccer and volleyball players (N=546) were recruited from a single county public school district in Kentucky consisting of five middle schools and four high schools. A total of 357 multi-sport, and 189 single sport (66 basketball, 57 soccer and 66 volleyball) athlete subjects were included due to their diagnosis of patellofemoral pain on physical exam. Testing consisted of completion of a standardized history and physician-administered physical examination to determine the presence of patellofemoral pain (PFP). This study compared self-reported multi-sport athletes with sport specialized athletes participating in only one sport. The sports participation data was normalized by sport season with each sport accounting for one season of exposure. Incidence rate ratios (IRR) and 95% confidence intervals (CI) were calculated and used to determine significant differences between athletes who specialized in sport in early youth and multi-sport athletes. Results Specialization in a single sport increased the relative risk of PFP incidence by 1.5 fold (95% CI 1.0 to 2.2; p=0.038) for cumulative PFP diagnoses. Specific diagnoses such as Sinding Larsen Johansson/patellar tendinopathy (95% CI 1.5 to 10.1; p=0.005) and Osgood Schlatter Disease (95% CI 1.5 to 10.1; p=0.005) demonstrated a four-fold greater relative risk in single sport compared to multiple sport athletes. Other specific PFP diagnoses such as Fat Pad, Plica, Trauma, Pes Anserine Bursitis and IT Band Tendonitis incidence were not different between single sport and multiple sport participants (p>0.05). Conclusion Early sport specialization in female adolescents is associated with increased risk of anterior knee pain disorders including PFP, Osgood Schlatter, Sinding Larsen-Johansson compared to multi-sport

  9. SPORT FACILITIES - SPORT ACTIVITIES HARDWARE

    Directory of Open Access Journals (Sweden)

    Zoran Mašić

    2008-08-01

    Full Text Available Realisation of sport activities always demanded certain conditions. Among those, sports facilities are certainly necessary. Since there were important changes in the process of training itself and successful performance, as well as, the results achieved by the sportsmen; there is a need for adequate sports facilities, that include whole variety of systems,equipment and necessities. Nowadays, Sport facilities are not only “the place of event”, but also a condition/necessity in achieving best sport results. It is demanded that these facilities are comfortable, absolutely secure and that they can accommodate transmissions: an opening, the course of sports activities and the announcement of the winner. The kind of sport activity, age, sex; so the “sports level” of the competitors is emphasising the specific demands to wards sports facilities.

  10. DEVELOPMENT OF A SPORTS SPECIFIC AEROBIC CAPACITY TEST FOR KARATE - A PILOT STUDY

    Directory of Open Access Journals (Sweden)

    David Nunan

    2006-07-01

    Full Text Available The purpose of the study was to develop an aerobic fitness assessment test for competitive Karate practitioners and describe the preliminary findings. Five well-trained, competitive Karate practitioners participated in this study. A protocol simulating common attack strikes used in competition Karate sparring was developed from video analysis. In addition, pilot testing established a specific sequence of strikes and timings to be used in the test. The time to perform the strike sequence remained the same, whilst the time between strike sequence performances was progressively reduced. The aim of the test was to increase intensity of exercise through a decrease in recovery. On two separate occasions, absolute and relative peak oxygen uptake (VO2peak, peak ventilation (VEpeak, maximum heart rate (HRM, and time to exhaustion (TE obtained during the test were recorded. Subjective feedback provided by the participants was positive in that participants felt the test accurately simulated actions of a competitive sparring situation, and as a result athletes felt more motivated to perform well on this test. There was no significant between test difference in absolute VO2peak, relative VO2peak, HRM and TE (p > 0.05, indicating a potentially high reproducibility with the new test for these variables (test 1-test 2 difference of 0.04 L·min-1, 1 ml·kg-1·min-1, -3 beats·min-1, and 28 s; respectively. However, VEpeak displayed potentially less reproducibility due to a significant difference observed between tests (test 1- test 2 difference of -2.8 L·min-1, p < 0.05. There was a significant relationship between TE and relative VO2peak (R2 = 0.77, p < 0.001. Further developments to the test will need to address issues with work rate/force output assessment/monitoring. The new test accurately simulates the actions of competitive Karate sparring

  11. A call for policy guidance on psychometric testing in doping control in sport

    DEFF Research Database (Denmark)

    Petróczi, Andrea; Backhouse, Susan H.; Barkoukis, Vassilis

    2015-01-01

    confounds self-reported psychometric test results. Further, the cognitive complexity surrounding test performance means that the response-time based measures and the lie detector tests for revealing concealed life-events (e.g., doping use) are prone to produce false or non-interpretable outcomes in field...

  12. Private Pilot Practical Test Standards for Lighter-Than-Air Balloon, Airship

    Science.gov (United States)

    1996-06-01

    The Private Pilot - Lighter-Than-Air (Balloon and Airship) Practical Test Standards (PTS) book has been published by the Federal Aviation Administration (FAA) to establish the standards for private pilot certification practical tests for the lighter-...

  13. Flight Instructor Practical Test Standards for Lighter-Than-Air: Balloon, Airship

    Science.gov (United States)

    1995-03-01

    The Flight Instructor - Lighter-Than-Air Practical Test Standards (PTS) : book has been published by the Federal Aviation Administration (FAA) to : establish the standards for flight instructor certification practical tests for : the lighter-than-air...

  14. Commercial Pilot Practical Test Standards for Lighter-Than-Air Balloon, Airship

    Science.gov (United States)

    1997-05-01

    The Commercial Pilot Lighter-Than-Air Practical Test Standards (PTS) book has been published by the Federal Aviation Administration (FAA) to establish the standards for commercial pilot certification practical tests for the lighter-than-air category,...

  15. Standardized testing: a case of annual national assessments in ...

    African Journals Online (AJOL)

    Standardized assessments are becoming a norm internationally. Governments have turned to standardized assessments due to mounting pressure by citizens for accountability, quality education, transparency, and increased public confidence in education. In South Africa, the observed learning deficiencies and prolonged ...

  16. Sports Injuries

    Science.gov (United States)

    ... sometimes you can injure yourself when you play sports or exercise. Accidents, poor training practices, or improper ... can also lead to injuries. The most common sports injuries are Sprains and strains Knee injuries Swollen ...

  17. Sports Safety

    Science.gov (United States)

    Playing sports can be fun, but it can also be dangerous if you are not careful. You can help ... you are healthy before you start playing your sport Wearing the right shoes, gear, and equipment Drinking ...

  18. Instant Replay: Investigating statistical Analysis in Sports

    OpenAIRE

    Sidhu, Gagan

    2011-01-01

    Technology has had an unquestionable impact on the way people watch sports. Along with this technological evolution has come a higher standard to ensure a good viewing experience for the casual sports fan. It can be argued that the pervasion of statistical analysis in sports serves to satiate the fan's desire for detailed sports statistics. The goal of statistical analysis in sports is a simple one: to eliminate subjective analysis. In this paper, we review previous work that attempts to anal...

  19. Standard test method for measuring waste glass or glass ceramic durability by vapor hydration test

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 The vapor hydration test method can be used to study the corrosion of a waste forms such as glasses and glass ceramics upon exposure to water vapor at elevated temperatures. In addition, the alteration phases that form can be used as indicators of those phases that may form under repository conditions. These tests; which allow altering of glass at high surface area to solution volume ratio; provide useful information regarding the alteration phases that are formed, the disposition of radioactive and hazardous components, and the alteration kinetics under the specific test conditions. This information may be used in performance assessment (McGrail et al, 2002 (1) for example). 1.2 This test method must be performed in accordance with all quality assurance requirements for acceptance of the data. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practice...

  20. Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This test method covers the screening of ablative materials to determine the relative thermal insulation effectiveness when tested as a flat panel in an environment of a steady flow of hot gas provided by an oxyacetylene burner. 1.2 This test method should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard of materials, products, or assemblies under actual fire conditions. However, results of this test method may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limi...

  1. Using standard serology blood tests to diagnose latent syphilis

    Directory of Open Access Journals (Sweden)

    G. L. Katunin

    2016-01-01

    Full Text Available Goal. To conduct a comparative assessment of the results of regulated serological tests obtained as a result of blood tests in patients suffering from latent syphilis. Materials and methods. The authors examined 187 patient medical records with newly diagnosed latent syphilis in FGBU GNTsDK (State Research Center for Dermatology, Venereology and Cosmetology, Health Ministry of the Russian Federation, in 2006-2015. The results of patient blood tests were analyzed with the use of non-treponemal (microprecipitation test/RPR and treponemal (passive hemagglutination test, immune-enzyme assay (IgA, IgM, IgG, IFabs, immunofluorescence test and Treponema pallidum immobilization test serology tests. Results. According to the results of blood tests of latent syphilis patients, the largest number of positive results was obtained as a result of treponemal serology tests such as immune-enzyme assay (100%, passive hemagglutination test (100% and IFabs (100%. The greatest number of negative results was observed in non-treponemal (microprecipitation test/RPR serology tests: in 136 (72.7% patients; evidently positive results (4+ test results were obtained in 8 (4.3% patients only. According to the results of a comparative analysis of blood tests in patients suffering from latent syphilis obtained with the use of treponemal serology tests, the greatest number of evidently positive results (4+ was noted for the passive hemagglutination test (67.9%. Negative treponemal test results were obtained with the use of the immunofluorescence test and Treponema pallidum immobilization test (21.9% and 11.8% of cases, respectively. Moreover, weakly positive results prevailed for the immunofluorescence test: in 65 (34.7% patients. Conclusion. These data confirm that the following treponemal tests belong to the most reliable ones for revealing patients suffering from latent syphilis: immune-enzyme assay, passive hemagglutination test and IFabs.

  2. SPORT MARKETING

    OpenAIRE

    Omer Špirtović; Danilo Aćimović; Ahmet Međedović; Zoran Bogdanović

    2010-01-01

    Word „marketing“ comes from AngloSaxon linguistic domain and implies in a narrow sense the market. Under marketing, we consider certain process, which should create and solve relations of exchange between manufacturers on one side, and consumers on the other. Discussion about sport marketing implies its theoretical definition and generalization, and then its actual definition in sport environment. Sport marketing belongs to business function of sport organization and represents primaly an eco...

  3. Who's on First? Gender Differences in Performance on the "SAT"® Test on Critical Reading Items with Sports and Science Content. Research Report. ETS RR-16-26

    Science.gov (United States)

    Chubbuck, Kay; Curley, W. Edward; King, Teresa C.

    2016-01-01

    This study gathered quantitative and qualitative evidence concerning gender differences in performance by using critical reading material on the "SAT"® test with sports and science content. The fundamental research questions guiding the study were: If sports and science are to be included in a skills test, what kinds of material are…

  4. 29 CFR 1630.10 - Qualification standards, tests, and other selection criteria.

    Science.gov (United States)

    2010-07-01

    ... DISABILITIES ACT § 1630.10 Qualification standards, tests, and other selection criteria. It is unlawful for a covered entity to use qualification standards, employment tests or other selection criteria that screen..., on the basis of disability, unless the standard, test or other selection criteria, as used by the...

  5. oh sport

    Directory of Open Access Journals (Sweden)

    Elena Grigoryeva

    2017-03-01

    Sports play a very important and diverse role in the present-day global culture. On the occasion of the 105th anniversary of Coubertin’s Ode we would like to wish sports to return to the main words of the Ode and to correspond with them: “Oh sport, you are the peace”.

  6. Sport Biomechanist

    Science.gov (United States)

    Sullivan, Megan

    2005-01-01

    If you are an athlete or sports enthusiast, you know that every second counts. To find that 1-2% improvement that can make the difference between 1st and 5th place, sport biomechanists use science to investigate sports techniques and equipment, seeking ways to improve athlete performance and reduce injury risk. In essence, they want athletes to…

  7. SMC Standard: Evaluation and Test Requirements for Liquid Rocket Engines

    Science.gov (United States)

    2017-07-26

    78 8.2 Pre-Launch Validation and Operational Tests ...................................................................... 78 8.2.1 General...completion of the development test program. The phase includes validation of test techniques, procedures, equipment, instrumentation, and software, as... reliability for flight operations. A corollary to TLYF is the “fly-as-you- test ” approach. “Fly-as-you- test ” means that flight operation should remain

  8. Annual meeting 1996 'Nondestructive materials testing'. German, Austrian and Swiss nondestructive materials testing standards as mirrored by international standardization. Vol. 1. Lectures

    International Nuclear Information System (INIS)

    1996-01-01

    The volume contains 45 lectures which were given at the annual meeting of the German Society for Nondestructive Testing on May 13-15, 1996 at Lindau. The main subjects were: Standardization of nondestructive testing, irradiation testing, ultrasonic testing and electromagnetic processes. 13 individual articles were included in the ENERGY database. (MM) [de

  9. Annual meeting 1996 'Nondestructive material testing'. German, Austrian and Swiss nondestructive materials testing standards as mirrored by international standardization. Vol. 2. Posters

    International Nuclear Information System (INIS)

    1996-01-01

    The volume contains 49 poster articles which were presented at the Annual Meeting of the German Society for Nondestructive Testing at Lindau on May 13-15, 1996. The main subjects were: Standardization of nondestructive testing, irradiation testing, ultrasonic testing and electromagnetic processes. 16 individual articles were included in the ENERGY databank. (MM) [de

  10. Role of advanced neuroimaging, fluid biomarkers and genetic testing in the assessment of sport-related concussion: a systematic review.

    Science.gov (United States)

    McCrea, Michael; Meier, Timothy; Huber, Daniel; Ptito, Alain; Bigler, Erin; Debert, Chantel T; Manley, Geoff; Menon, David; Chen, Jen-Kai; Wall, Rachel; Schneider, Kathryn J; McAllister, Thomas

    2017-06-01

    To conduct a systematic review of published literature on advanced neuroimaging, fluid biomarkers and genetic testing in the assessment of sport-related concussion (SRC). Computerised searches of Medline, PubMed, Cumulative Index to Nursing and Allied Health Literature (CINAHL), PsycINFO, Scopus and Cochrane Library from 1 January 2000 to 31 December 2016 were done. There were 3222 articles identified. In addition to medical subject heading terms, a study was included if (1) published in English, (2) represented original research, (3) involved human research, (4) pertained to SRC and (5) involved data from neuroimaging, fluid biomarkers or genetic testing collected within 6 months of injury. Ninety-eight studies qualified for review (76 neuroimaging, 16 biomarkers and 6 genetic testing). Separate reviews were conducted for neuroimaging, biomarkers and genetic testing. A standardised data extraction tool was used to document study design, population, tests employed and key findings. Reviewers used a modified quality assessment of studies of diagnostic accuracy studies (QUADAS-2) tool to rate the risk of bias, and a modified Grading of Recommendations Assessment, Development, and Evaluation (GRADE) system to rate the overall level of evidence for each search. Results from the three respective reviews are compiled in separate tables and an interpretive summary of the findings is provided. Advanced neuroimaging, fluid biomarkers and genetic testing are important research tools, but require further validation to determine their ultimate clinical utility in the evaluation of SRC. Future research efforts should address current gaps that limit clinical translation. Ultimately, research on neurobiological and genetic aspects of SRC is predicted to have major translational significance to evidence-based approaches to clinical management of SRC, much like applied clinical research has had over the past 20 years. © Article author(s) (or their employer(s) unless otherwise

  11. Tests of the standard electroweak model in beta decay

    Energy Technology Data Exchange (ETDEWEB)

    Severijns, N.; Beck, M. [Universite Catholique de Louvain (UCL), Louvain-la-Neuve (Belgium); Naviliat-Cuncic, O. [Caen Univ., CNRS-ENSI, 14 (France). Lab. de Physique Corpusculaire

    2006-05-15

    We review the current status of precision measurements in allowed nuclear beta decay, including neutron decay, with emphasis on their potential to look for new physics beyond the standard electroweak model. The experimental results are interpreted in the framework of phenomenological model-independent descriptions of nuclear beta decay as well as in some specific extensions of the standard model. The values of the standard couplings and the constraints on the exotic couplings of the general beta decay Hamiltonian are updated. For the ratio between the axial and the vector couplings we obtain C{sub A},/C{sub V} = -1.26992(69) under the standard model assumptions. Particular attention is devoted to the discussion of the sensitivity and complementarity of different precision experiments in direct beta decay. The prospects and the impact of recent developments of precision tools and of high intensity low energy beams are also addressed. (author)

  12. The interval shuttle run test for intermittent sport players : evaluation of reliability

    NARCIS (Netherlands)

    Lemmink, K.A.P.M.; Visscher, C.; Lambert, M.I.; Lamberts, R.P.

    2004-01-01

    The reliability of the interval shuttle run test (ISRT) as a submaximal and maximal field test to measure intermittent endurance capacity was examined. During the ISRT, participants alternately run for 30 seconds and walk for 15 seconds. The running speed is increased from 10 km.h(-1) every 90

  13. Sport Governance and Policy Development: An Ethical Approach to Managing Sport in the 21st Century

    Science.gov (United States)

    Sawyer, Thomas H.; Bodey, Kimberly J.; Judge, Lawrence W.

    2008-01-01

    "Sport Governance and Policy Development" is written with the sport management student in mind. Designed to address the curriculum standards set by the National Association for Sport and Physical Education and the North American Society for Sport Management, this book provides information to meet core and related competency areas required for the…

  14. Framework for a Comparative Accelerated Testing Standard for PV Modules: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, S.; Wohlgemuth, J.; Yamamichi, M.; Sample, T.; Miller, D.; Meakin, D.; Monokroussos, C.; TamizhMani, M.; Kempe, M.; Jordan, D.; Bosco, N.; Hacke, P.; Bermudez, V.; Kondo, M.

    2013-08-01

    As the photovoltaic industry has grown, the interest in comparative accelerated testing has also grown. Private test labs offer testing services that apply greater stress than the standard qualification tests as tools for differentiating products and for gaining increased confidence in long-term PV investments. While the value of a single international standard for comparative accelerated testing is widely acknowledged, the development of a consensus is difficult. This paper strives to identify a technical basis for a comparative standard.

  15. Standard test method for isotopic analysis of uranium hexafluoride by double standard single-collector gas mass spectrometer method

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This is a quantitative test method applicable to determining the mass percent of uranium isotopes in uranium hexafluoride (UF6) samples with 235U concentrations between 0.1 and 5.0 mass %. 1.2 This test method may be applicable for the entire range of 235U concentrations for which adequate standards are available. 1.3 This test method is for analysis by a gas magnetic sector mass spectrometer with a single collector using interpolation to determine the isotopic concentration of an unknown sample between two characterized UF6 standards. 1.4 This test method is to replace the existing test method currently published in Test Methods C761 and is used in the nuclear fuel cycle for UF6 isotopic analyses. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appro...

  16. Practical issues for testing thin film PV modules at standard test conditions.

    OpenAIRE

    Marín González, Omar; Raga Arroyo, Manuela Pilar; Alonso Garcia, M. Carmen; Muñoz-García, Miguel Angel

    2013-01-01

    Thin film photovoltaic (TF) modules have gained importance in the photovoltaic (PV) market. New PV plants increasingly use TF technologies. In order to have a reliable sample of a PV module population, a huge number of modules must be measured. There is a big variety of materials used in TF technology. Some of these modules are made of amorphous or microcrystalline silicon. Other are made of CIS or CdTe. Not all these materials respond the same under standard test conditions (STC) of power...

  17. Undergraduate Students' Errors in the Administration of Standardized Tests.

    Science.gov (United States)

    Giacobbe, George A.; Traynelis-Yurek, Elaine

    1989-01-01

    Undergraduate students (N=106) in a psychoeducational testing course were required to administer the Peabody Picture Vocabulary Test-Revised to the instructor. Only 29.2 percent were able to administer the test error-free, indicating that a one-semester course is insufficient preparation for special educators to become effective test…

  18. Examination on sports consciousness and conditions influencing sports activity and physical fitness in adolescent male students

    OpenAIRE

    中, 比呂志; 出村, 慎一

    1992-01-01

    The purpose of this study was to determine the influence of factors such as sports consciousness, sports conditions and physical fitness to sports activity, and to examine the influence of sports consciousness and sports conditions on the improvement of physical fitness in adolescent male students. The Diagnostic Inventory for Sport Counseling (DISC) and physical fitness tests designed by the Ministry of Education in Japan were administered to 687 healthy male students aged 15 to 20 years. Si...

  19. Physical fitness testing of students did not specialized departments in the selection and admission to the department of military-sports-round

    Directory of Open Access Journals (Sweden)

    Buryanovaty A.N.

    2012-09-01

    Full Text Available Modern progress of military-sports-round trends are considered. Influence of informing tests is rotined on a selection and put in the separation of military-sports-round. 180 (n = 180 students of the not special faculties took part in research. On results testing 18 students which rotined the level of preparedness above average were selected. 72 students were yet selected with a low level, 54 - below the average and to 36 middle. The optimum distributing has testing and it is counted on two days. It is set that the selection of these tests helps to define the level of physical preparedness of students and take away physically geared-up for future fruitful work. Directions and examples of planning of educational training process are rotined for achievement of certain results.

  20. Prevalence of Invalid Performance on Baseline Testing for Sport-Related Concussion by Age and Validity Indicator.

    Science.gov (United States)

    Abeare, Christopher A; Messa, Isabelle; Zuccato, Brandon G; Merker, Bradley; Erdodi, Laszlo

    2018-03-12

    Estimated base rates of invalid performance on baseline testing (base rates of failure) for the management of sport-related concussion range from 6.1% to 40.0%, depending on the validity indicator used. The instability of this key measure represents a challenge in the clinical interpretation of test results that could undermine the utility of baseline testing. To determine the prevalence of invalid performance on baseline testing and to assess whether the prevalence varies as a function of age and validity indicator. This retrospective, cross-sectional study included data collected between January 1, 2012, and December 31, 2016, from a clinical referral center in the Midwestern United States. Participants included 7897 consecutively tested, equivalently proportioned male and female athletes aged 10 to 21 years, who completed baseline neurocognitive testing for the purpose of concussion management. Baseline assessment was conducted with the Immediate Postconcussion Assessment and Cognitive Testing (ImPACT), a computerized neurocognitive test designed for assessment of concussion. Base rates of failure on published ImPACT validity indicators were compared within and across age groups. Hypotheses were developed after data collection but prior to analyses. Of the 7897 study participants, 4086 (51.7%) were male, mean (SD) age was 14.71 (1.78) years, 7820 (99.0%) were primarily English speaking, and the mean (SD) educational level was 8.79 (1.68) years. The base rate of failure ranged from 6.4% to 47.6% across individual indicators. Most of the sample (55.7%) failed at least 1 of 4 validity indicators. The base rate of failure varied considerably across age groups (117 of 140 [83.6%] for those aged 10 years to 14 of 48 [29.2%] for those aged 21 years), representing a risk ratio of 2.86 (95% CI, 2.60-3.16; P validity indicator and the age of the examinee. The strong age association, with 3 of 4 participants aged 10 to 12 years failing validity indicators, suggests that

  1. Primordial alchemy: a test of the standard model

    International Nuclear Information System (INIS)

    Steigman, G.

    1987-01-01

    Big Bang Nucleosynthesis provides the only probe of the early evolution of the Universe constrained by observational data. The standard, hot, big bang model predicts the synthesis of the light elements (D, 3 He, 4 He, 7 Li) in astrophysically interesting abundances during the first few minutes in the evolution of the Universe. A quantitative comparison of the predicted abundances with those observed astronomically confirms the consistency of the standard model and yields valuable constraints on the parameters of cosmology and elementary particle physics. The current status of the comparison between theory and observation will be reviewed and the opportunities for future advances outlined

  2. 49 CFR 219.701 - Standards for drug and alcohol testing.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Standards for drug and alcohol testing. 219.701... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CONTROL OF ALCOHOL AND DRUG USE Drug and Alcohol Testing Procedures § 219.701 Standards for drug and alcohol testing. (a) Drug testing required or authorized by subparts B...

  3. Metabolic interpretation of ventilatory parameters during maximal effort test and their applicability to sports

    Directory of Open Access Journals (Sweden)

    Luis Eduardo Barreto Martins

    2007-09-01

    Full Text Available One important tool for producing specifi c and individualized training intensities is to determine ventilatory threshold (VT, respiratory compensation point (RCP and maximal oxygen uptake (VO2max by means of maximum effort testing. However, in order to be able to interpret these data in a wide-ranging manner, it is also important to understand the metabolic responses that occur during the test as the systems transporting and utilizing O2 and producing CO2 adjust. This review article presents an overview of the metabolic responses that take place during a hypothetical maximum effort test, and the applicability of the fi gures thus obtained to the training of athletes. ABSTRACT A determinação das velocidades atingidas no limiar ventilatório (LV, ponto de compensação respiratório (PCR e consumo máximo de O2 (VO2max através de um teste de esforço máximo, é uma ferramenta importante para a aplicação de intensidades de treinamento específicas e individualizadas. Mas para poder interpretar os dados de uma forma abrangente, também é importante o entendimento das respostas metabólicas presentes no ajuste dos sistemas de transporte e utilização de O2 e produção de CO2 durante a realização do teste. Esta revisão apresenta um panorama das respostas metabólicas que acontecem durante a realização de um teste de esforço máximo hipotético, e a aplicabilidade dos valores obtidos no treinamento de atletas.

  4. New ASTM Standards for Nondestructive Testing of Aerospace Composites

    Science.gov (United States)

    Waller, Jess M.; Saulsberry, Regor L.

    2010-01-01

    Problem: Lack of consensus standards containing procedural detail for NDE of polymer matrix composite materials: I. Flat panel composites. II. Composite components with more complex geometries a) Pressure vessels: 1) composite overwrapped pressure vessels (COPVs). 2) composite pressure vessels (CPVs). III. Sandwich core constructions. Metal and brittle matrix composites are a possible subject of future effort.

  5. Precision tests of the standard model at LEP

    International Nuclear Information System (INIS)

    Mele, Barbara; Universita La Sapienza, Rome

    1994-01-01

    Recent LEP results on electroweak precision measurements are reviewed. Line-shape and asymmetries analysis on the Z 0 peak is described. Then, the consistency of the Standard Model predictions with experimental data and consequent limits on the top mass are discussed. Finally, the possibility of extracting information and constrains on new theoretical models from present data is examined. (author). 20 refs., 5 tabs

  6. 42 CFR 493.1489 - Standard; Testing personnel qualifications.

    Science.gov (United States)

    2010-10-01

    ... HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Personnel for Nonwaived... biology; and (iii) Twelve semester hours of chemistry, biology, or medical laboratory technology in any... analysis— (i) Be qualified under § 493.1489(b)(1), (b)(2), (b)(3), (b)(4), or (b)(5); (ii) Have earned a...

  7. Effects of repetitive subconcussive head trauma on the neuropsychological test performance of high school athletes: A comparison of high, moderate, and low contact sports.

    Science.gov (United States)

    Tsushima, William T; Ahn, Hyeong Jun; Siu, Andrea M; Yoshinaga, Kara; Choi, So Yung; Murata, Nathan M

    2018-02-02

    The aim of this study was to examine the neuropsychological test results of non-concussed high school athletes playing at three different levels of contact sports. Based on the concussion risk data of 12 different sports, a High Contact group (n=2819; wrestling/martial arts, cheerleading, track and field, football), a Moderate Contact group (n=2323; softball, basketball, soccer), and a Low Contact group (n=1580; baseball, volleyball, water polo, tennis, cross-country) were formed and compared in terms of their scores on the Immediate Post-Concussion Assessment and Cognitive Testing (ImPACT). The results revealed that the High Contact group obtained small but statistically poorer performances in ImPACT Visual Memory, Visual Motor Speed, Impulse Control, and Total Symptom scores compared to the Moderate and Low Contact groups. The High Contact group also had poorer Reaction Time scores compared to the Low Contact group. No differences between the Moderate and Low Contact groups were noted. The findings, along with prior similar results, tentatively raise concerns that participant in high contact sports, exposed to repetitive subconcussive head trauma, may be at greater risk for lowered neuropsychological functioning and increased symptoms, compared to other high school athletes. In view of the preliminary nature of this investigation, more research into the effects of frequent head impacts in high school sports is strongly recommended.

  8. Standard test methods for arsenic in uranium hexafluoride

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 These test methods are applicable to the determination of total arsenic in uranium hexafluoride (UF6) by atomic absorption spectrometry. Two test methods are given: Test Method A—Arsine Generation-Atomic Absorption (Sections 5-10), and Test Method B—Graphite Furnace Atomic Absorption (Appendix X1). 1.2 The test methods are equivalent. The limit of detection for each test method is 0.1 μg As/g U when using a sample containing 0.5 to 1.0 g U. Test Method B does not have the complete collection details for precision and bias data thus the method appears as an appendix. 1.3 Test Method A covers the measurement of arsenic in uranyl fluoride (UO2F2) solutions by converting arsenic to arsine and measuring the arsine vapor by flame atomic absorption spectrometry. 1.4 Test Method B utilizes a solvent extraction to remove the uranium from the UO2F2 solution prior to measurement of the arsenic by graphite furnace atomic absorption spectrometry. 1.5 Both insoluble and soluble arsenic are measured when UF6 is...

  9. Standard test method for electrochemical critical pitting temperature testing of stainless steels

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1999-01-01

    1.1 This test method covers a procedure for the evaluation of the resistance of stainless steel and related alloys to pitting corrosion based on the concept of the determination of a potential independent critical pitting temperature (CPT). 1.2 This test methods applies to wrought and cast products including but not restricted to plate, sheet, tubing, bar, forgings, and welds, (see Note 1). Note 1—Examples of CPT measurements on sheet, plate, tubing, and welded specimens for various stainless steels can be found in Ref (1). See the research reports (Section 14). 1.3 The standard parameters recommended in this test method are suitable for characterizing the CPT of austenitic stainless steels and other related alloys with a corrosion resistance ranging from that corresponding to solution annealed UNS S31600 (Type 316 stainless steel) to solution annealed UNS S31254 (6 % Mo stainless steel). 1.4 This test method may be extended to stainless steels and other alloys related to stainless steel that have a CPT...

  10. Airside HVAC BESTEST: HVAC Air-Distribution System Model Test Cases for ASHRAE Standard 140

    Energy Technology Data Exchange (ETDEWEB)

    Judkoff, Ronald [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Neymark, Joel [J. Neymark & Associates; Kennedy, Mike D. [Mike D. Kennedy, Inc.; Gall, J. [AAON, Inc.; Henninger, R. [GARD Analytics, Inc.; Hong, T. [Lawrence Berkeley National Laboratory; Knebel, D. [AAON, Inc.; McDowell, T. [Thermal Energy System Specialists, LLC; Witte, M. [GARD Analytics, Inc.; Yan, D. [Tsinghua University; Zhou, X. [Tsinghua University

    2017-08-07

    This paper summarizes recent work to develop new airside HVAC equipment model analytical verification test cases for ANSI/ASHRAE Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs. The analytical verification test method allows comparison of simulation results from a wide variety of building energy simulation programs with quasi-analytical solutions, further described below. Standard 140 is widely cited for evaluating software for use with performance-path energy efficiency analysis, in conjunction with well-known energy-efficiency standards including ASHRAE Standard 90.1, the International Energy Conservation Code, and other international standards. Airside HVAC Equipment is a common area of modelling not previously explicitly tested by Standard 140. Integration of the completed test suite into Standard 140 is in progress.

  11. Reliability and validity of Yo-Yo tests in 9- to 16-year-old football players and matched non-sports active schoolboys

    DEFF Research Database (Denmark)

    Póvoas, Susana C A; Castagna, Carlo; Soares, José M C

    2016-01-01

    The purpose of this study was to examine the test-retest reliability and construct validity of three age-adapted Yo-Yo intermittent tests in football players aged 9-16 years (n = 70) and in age-matched non-sports active boys (n = 72). Within 7 days, each participant performed two repetitions...... performances and HRpeak are reliable for 9- to 16-year-old footballers and non-sports active boys. Additionally, performances of the three Yo-Yo tests were seemingly better for football-trained than for non-sports active boys, providing evidence of construct validity....... of an age-related intensity-adapted Yo-Yo intermittent test, i.e. the Yo-Yo intermittent recovery level 1 children's test for 9- to 11-year-olds; the Yo-Yo intermittent endurance level 1 for 12- to 13-year-olds and the Yo-Yo intermittent endurance level 2 test for 14- to 16-year-olds. Peak heart rate...

  12. 42 CFR 493.1425 - Standard; Testing personnel responsibilities.

    Science.gov (United States)

    2010-10-01

    ... authorized by the laboratory director and require a degree of skill commensurate with the individual's... test results and either must correct the problems or immediately notify the technical consultant, clinical consultant or director; and (6) Document all corrective actions taken when test systems deviate...

  13. Standardization of incubation conditions for hemolysis testing of biomaterials

    NARCIS (Netherlands)

    Henkelman, Sandra; Rakhorst, Gerhard; Blanton, John; van Oeveren, Willem

    2009-01-01

    Hemolysis testing is the most common method to determine the hemocompatibility properties of biomaterials. There is however no consensus on the procedures of hemolysis testing due to insufficient comparative studies on the quality of the red blood cells used and the experimental conditions of

  14. 40 CFR 51.357 - Test procedures and standards.

    Science.gov (United States)

    2010-07-01

    ... following steps: (i) Test equipment shall be connected to the fuel tank canister hose at the canister end... minutes and monitor for a sudden pressure drop, indicating that the fuel tank was pressurized. (v) The... be performed without repair or adjustment at the inspection facility, prior to the test, except as...

  15. Developing and Standardization of a Diagnostic Reading Test

    Directory of Open Access Journals (Sweden)

    Tahereh Sima-Shirazi

    2004-06-01

    Full Text Available Objective: This paper is a report on the development, structure and content of a diagnostic dyslexia reading test. The target population of this test is persian children who have problems in learning reading and may be considered as dyslexic. This diagnostic test is the first reading test developed for the native speakers of persian. Materials & Methods: The theoretical framework of the test is based on two well- established reading tests for the English speaking children, namely Durrell Analysis of Reading and Neale Analysis of Reading Ability. The linguistic content of the subtests is selected from the vocabulary and texts of the textbook used in the primary schools. Both the vocabulary and the sentences of the parrallel passeges were controlled for frequency, phonemic/graphemic regularity, syllable structure, morphology, syntax and semantics. They were also controlled for value judgement by two linguistics and three first grader teachers.The first version of the test is normed on 605 boy and girl first graders from different educational sectors and schools selected randomly.The method used in this research is cross- sectional, descriptive- analytic and the data analysis is based on pearson, and mann-whitney u. Results: Reliability of the test is calculated based on parrallel forms (~ 90% and validity is based on content validity.This test has a supplementary section including spelling, graphem/ phoneme correspondness, nonword reading, irregular word reading, and copy subtests. Conclusion: Considering highreliability and precise validation of the test it can be used to diagnose the dyslexia and related linguistic impairments.

  16. Exploring and testing the Standard Model and beyond

    International Nuclear Information System (INIS)

    West, G.; Cooper, F.; Ginsparg, P.; Habib, S.; Gupta, R.; Mottola, E.; Nieto, M.; Mattis, M.

    1998-01-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The goal of this project was to extend and develop the predictions of the Standard Model of particle physics in several different directions. This includes various aspects of the strong nuclear interactions in quantum chromodynamics (QCD), electroweak interactions and the origin of baryon asymmetry in the universe, as well as gravitational physics

  17. Test Standards for Contingency Base Waste-to-Energy Technologies

    Science.gov (United States)

    2015-08-01

    standard and challenge recipes by weight percent ........6 Table 3 Recommended breakout of plastic recipes by weight percent ...............7 Table 4...to select the appropriate VOC and SVOC target compounds, it is recommended to review the list of hazardous air pollutants provided in 42 United...Class A explosives, or Class B explosives classifications. Toxicity: Toxic wastes are harmful or fatal when ingested or absorbed. When toxic wastes

  18. Column percolation test for contaminated soils: Key factors for standardization.

    Science.gov (United States)

    Naka, Angelica; Yasutaka, Tetsuo; Sakanakura, Hirofumi; Kalbe, Ute; Watanabe, Yasutaka; Inoba, Seiji; Takeo, Miyuki; Inui, Toru; Katsumi, Takeshi; Fujikawa, Takuro; Sato, Kenichi; Higashino, Kazuo; Someya, Masayuki

    2016-12-15

    Column percolation tests may be suitable for prediction of chemical leaching from soil and soil materials. However, compared with batch leaching tests, they are time-consuming. It is therefore important to investigate ways to shorten the tests without affecting the quality of results. In this study, we evaluate the feasibility of decreasing testing time by increasing flow rate and decreasing equilibration time compared to the conditions specified in ISO/TS 21268-3, with equilibration periods of 48h and flow rate of 12mL/h. We tested three equilibration periods (0, 12-16, and 48h) and two flow rates (12 and 36mL/h) on four different soils and compared the inorganic constituent releases. For soils A and D, we observed similar values for all conditions except for the 0h-36mL/h case. For soil B, we observed no appreciable differences between the tested conditions, while for soil C there were no consistent trends probably due to the difference in ongoing oxidation reactions between soil samples. These results suggest that column percolation tests can be shortened from 20 to 30days to 7-9days by decreasing the equilibration time to 12-16h and increasing the flow rate to 36mL/h for inorganic substances. Copyright © 2016 The Author(s). Published by Elsevier B.V. All rights reserved.

  19. Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 These test methods cover procedures for determining the ability of photovoltaic modules to withstand the mechanical loads, stresses and deflections used to simulate, on an accelerated basis, high wind conditions, heavy snow and ice accumulation, and non-planar installation effects. 1.1.1 A static load test to 2400 Pa is used to simulate wind loads on both module surfaces 1.1.2 A static load test to 5400 Pa is used to simulate heavy snow and ice accumulation on the module front surface. 1.1.3 A twist test is used to simulate the non-planar mounting of a photovoltaic module by subjecting it to a twist angle of 1.2°. 1.1.4 A cyclic load test of 10 000 cycles duration and peak loading to 1440 Pa is used to simulate dynamic wind or other flexural loading. Such loading might occur during shipment or after installation at a particular location. 1.2 These test methods define photovoltaic test specimens and mounting methods, and specify parameters that must be recorded and reported. 1.3 Any individual mech...

  20. Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method covers a technique for generating data to characterize the kinetics of the release of outgassing products from materials. This technique will determine both the total mass flux evolved by a material when exposed to a vacuum environment and the deposition of this flux on surfaces held at various specified temperatures. 1.2 This test method describes the test apparatus and related operating procedures for evaluating the total mass flux that is evolved from a material being subjected to temperatures that are between 298 and 398 K. Pressures external to the sample effusion cell are less than 7 × 10−3 Pa (5 × 10−5 torr). Deposition rates are measured during material outgassing tests. A test procedure for collecting data and a test method for processing and presenting the collected data are included. 1.3 This test method can be used to produce the data necessary to support mathematical models used for the prediction of molecular contaminant generation, migration, and deposition. 1.4 Al...

  1. Standard test method for measurement of fatigue crack growth rates

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2015-01-01

    1.1 This test method covers the determination of fatigue crack growth rates from near-threshold to Kmax controlled instability. Results are expressed in terms of the crack-tip stress-intensity factor range (ΔK), defined by the theory of linear elasticity. 1.2 Several different test procedures are provided, the optimum test procedure being primarily dependent on the magnitude of the fatigue crack growth rate to be measured. 1.3 Materials that can be tested by this test method are not limited by thickness or by strength so long as specimens are of sufficient thickness to preclude buckling and of sufficient planar size to remain predominantly elastic during testing. 1.4 A range of specimen sizes with proportional planar dimensions is provided, but size is variable to be adjusted for yield strength and applied force. Specimen thickness may be varied independent of planar size. 1.5 The details of the various specimens and test configurations are shown in Annex A1-Annex A3. Specimen configurations other than t...

  2. 40 CFR 82.38 - Approved independent standards testing organizations.

    Science.gov (United States)

    2010-07-01

    ... equipment testing and the technical experience of the organization's personnel; (iii) Thorough knowledge of... procedures are appropriate for that purpose. (2) That the organization has no conflict of interest and will...

  3. Environmental test planning, selection and standardization aids available

    Science.gov (United States)

    Copeland, E. H.; Foley, J. T.

    1968-01-01

    Requirements for instrumentation, equipment, and methods to be used in conducting environmental tests on components intended for use by a wide variety of technical personnel of different educational backgrounds, experience, and interests is announced.

  4. Development and standardization of perafom integrated aptitude test

    African Journals Online (AJOL)

    / selection/ placement and the measurement of intelligence prompted the development of Perafom Integrated Aptitude Test (PIAT). Following the due psychometric process of item selection, PIAT comprises 40 items derived from several ...

  5. Standard Operating Procedure for Accelerated Corrosion Testing at ARL

    Science.gov (United States)

    2017-11-01

    to scribe nonferrous materials so as to prevent contamination of the substrate during the process. The "X" scribe is made by scribing 2 intersecting...may include GMW14872 Cyclic Corrosion Testing (typically Exterior, Exposure C), ASTM B117 Neutral Salt Fog Testing, ASTM G50 Atmospheric Corrosion...using the same cleaning procedures, contamination of the substrate is minimized during the scribe process. All partners adhering to guidelines and

  6. Predicting standard penetration test N-value from cone penetration test data using artificial neural networks

    Directory of Open Access Journals (Sweden)

    Bashar Tarawneh

    2017-01-01

    Full Text Available Standard Penetration Test (SPT and Cone Penetration Test (CPT are the most frequently used field tests to estimate soil parameters for geotechnical analysis and design. Numerous soil parameters are related to the SPT N-value. In contrast, CPT is becoming more popular for site investigation and geotechnical design. Correlation of CPT data with SPT N-value is very beneficial since most of the field parameters are related to SPT N-values. A back-propagation artificial neural network (ANN model was developed to predict the N60-value from CPT data. Data used in this study consisted of 109 CPT-SPT pairs for sand, sandy silt, and silty sand soils. The ANN model input variables are: CPT tip resistance (qc, effective vertical stress (σv′, and CPT sleeve friction (fs. A different set of SPT-CPT data was used to check the reliability of the developed ANN model. It was shown that ANN model either under-predicted the N60-value by 7–16% or over-predicted it by 7–20%. It is concluded that back-propagation neural networks is a good tool to predict N60-value from CPT data with acceptable accuracy.

  7. Sports Digitalization

    DEFF Research Database (Denmark)

    Xiao, Xiao; Hedman, Jonas; Tan, Felix Ter Chian

    2017-01-01

    evolution, as digital technologies are increasingly entrenched in a wide range of sporting activities and for applications beyond mere performance enhancement. Despite such trends, research on sports digitalization in the IS discipline is surprisingly still nascent. This paper aims at establishing......Ever since its first manifesto in Greece around 3000 years ago, sports as a field has accumulated a long history with strong traditions while at the same time, gone through tremendous changes toward professionalization and commercialization. The current waves of digitalization have intensified its...... a discourse on sports digitalization within the discipline. Toward this, we first provide an understanding of the institutional characteristics of the sports industry, establishing its theoretical importance and relevance in our discipline; second, we reveal the latest trends of digitalization in the sports...

  8. Quality standards for sample collection in coagulation testing.

    Science.gov (United States)

    Lippi, Giuseppe; Salvagno, Gian Luca; Montagnana, Martina; Lima-Oliveira, Gabriel; Guidi, Gian Cesare; Favaloro, Emmanuel J

    2012-09-01

    Preanalytical activities, especially those directly connected with blood sample collection and handling, are the most vulnerable steps throughout the testing process. The receipt of unsuitable samples is commonplace in laboratory practice and represents a serious problem, given the reliability of test results can be adversely compromised following analysis of these specimens. The basic criteria for an appropriate and safe venipuncture are nearly identical to those used for collecting blood for clinical chemistry and immunochemistry testing, and entail proper patient identification, use of the correct technique, as well as appropriate devices and needles. There are, however, some peculiar aspects, which are deemed to be particularly critical when collecting quality specimens for clot-based tests, and these require clearer recognition. These include prevention of prolonged venous stasis, collection of nonhemolyzed specimens, order of draw, and appropriate filling and mixing of the primary collection tubes. All of these important preanalytical issues are discussed in this article, and evidence-based suggestions as well as recommendations on how to obtain a high-quality sample for coagulation testing are also illustrated. We have also performed an investigation aimed to identify variation of test results due to underfilling of primary blood tubes, and have identified a clinically significant bias in test results when tubes are drawn at less than 89% of total fill for activated partial thromboplastin time, less than 78% for fibrinogen, and less than 67% for coagulation factor VIII, whereas prothrombin time and activated protein C resistance remain relatively reliable even in tubes drawn at 67% of the nominal volume. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  9. Do current sports brassiere designs impede respiratory function?

    Science.gov (United States)

    Bowles, Kelly-Ann; Steele, Julie R; Chaunchaiyakul, Rungchai

    2005-09-01

    Although sports brassieres are more effective in limiting breast motion and related breast pain when compared with standard fashion brassieres, some females do not wear sports brassieres during physical activity, as they perceive them to be too tight around the torso, possibly impeding their performance during physical activity. The purpose of this study was to determine whether breast hypertrophy, breast momentum, and/or wearing a sports brassiere impeded respiratory function at rest and during physical activity. Twenty-two active women completed standard resting spirometry maneuvers while not wearing a brassiere. All subjects then completed maximal cycle ergometer testing in two breast support conditions (sports brassiere and no brassiere (NB)), followed by submaximal treadmill exercise tests under three breast support conditions (sports brassiere, no brassiere and fashion brassiere) while standard spirometry, brassiere pressure and comfort were measured. The sports brassiere imparted significantly more pressure on smaller breasted females' torsos when compared with the fashion brassiere (0.861 +/- 0.247 and 0.672 +/- 0.254 N.cm(-2), respectively), although this increased pressure did not appear to significantly affect measured lung volumes or brassiere comfort scores. Brassiere size affected maximal exercise ability (relative VO(2peak): smaller breasted NB: 49.84 +/- 6.15 mL.kg(-1).min(-1); larger breasted NB: 40.76 +/- 4.47 mL.kg(-1).min(-1)) as well as some temporal measures of resting and submaximal respiration. However, no significant difference was found between the no brassiere and brassiere conditions in regards to measured lung volumes. As no significant restriction to exercise performance or respiratory mechanics was found when subjects wore sports brassieres, it was concluded that active females should wear a sports brassiere during physical activity to reduce breast motion and related breast pain.

  10. Standard practice for ultrasonic testing of wrought products

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2013-01-01

    1.1 Purpose—This practice establishes the minimum requirements for ultrasonic examination of wrought products. Note 1—This standard was adopted to replace MIL-STD-2154, 30 Sept. 1982. This standard is intended to be used for the same applications as the document which it replaced. Users should carefully review its requirements when considering its use for new, or different applications, or both. 1.2 Application—This practice is applicable for examination of materials such as, wrought metals and wrought metal products. 1.2.1 Wrought Aluminum Alloy Products—Examination shall be in accordance with Practice B 594. 1.3 Acceptance Class—When examination is performed in accordance with this practice, engineering drawings, specifications, or other applicable documents shall indicate the acceptance criteria. Five ultrasonic acceptance classes are defined in Table 1. One or more of these classes may be used to establish the acceptance criteria or additional or alternate criteria may be specified. 1.4 Ord...

  11. Evaluation of Desensol As a Standard Patch Test Kit

    Directory of Open Access Journals (Sweden)

    K C Shah

    1987-01-01

    Full Text Available In a study undertaken to find out the usefulness of ′Desensol′ patch test kit to detect contact allergens, in 200 cases revealed 24 cases with negative patch test with all the antigens and 55 cases reacted to even the Vaseline control. -Excluding these 79 cases, the common contact allergens were potassium bichr6ma,te, (40.49%, TMTD(28.92%, PPD(24.79%, epoxy resin (23.14%, colophony (19.0%, nickel sulfate (19.0%, Framycetin (19.0% and nitrofurazone (19.0%. Desensol patch test kit is lacking in certain antigens while in our country due to varied environmental factors and social customs, a person is exposed to a large number of natural and man-made contact allergens. So usefulness of such a kit like. Desensol is limited.

  12. Analysis of Individual "Test Of Astronomy STandards" (TOAST) Item Responses

    Science.gov (United States)

    Slater, Stephanie J.; Schleigh, Sharon Price; Stork, Debra J.

    2015-01-01

    The development of valid and reliable strategies to efficiently determine the knowledge landscape of introductory astronomy college students is an effort of great interest to the astronomy education community. This study examines individual item response rates from a widely used conceptual understanding survey, the Test Of Astronomy Standards…

  13. Standard Test Methods for Constituent Content of Composite Materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 These test methods determine the constituent content of composite materials by one of two approaches. Method I physically removes the matrix by digestion or ignition by one of seven procedures, leaving the reinforcement essentially unaffected and thus allowing calculation of reinforcement or matrix content (by weight or volume) as well as percent void volume. Method II, applicable only to laminate materials of known fiber areal weight, calculates reinforcement or matrix content (by weight or volume), and the cured ply thickness, based on the measured thickness of the laminate. Method II is not applicable to the measurement of void volume. 1.1.1 These test methods are primarily intended for two-part composite material systems. However, special provisions can be made to extend these test methods to filled material systems with more than two constituents, though not all test results can be determined in every case. 1.1.2 The procedures contained within have been designed to be particularly effective for ce...

  14. 42 CFR 493.1291 - Standard: Test report.

    Science.gov (United States)

    2010-10-01

    ... electronic system(s) in place to ensure test results and other patient-specific data are accurately and... information maintained as part of the patient's chart or medical record must be readily available to the...) Results and patient-specific data electronically reported to network or interfaced systems. (3) Manually...

  15. Genetics & sport: bioethical concerns.

    Science.gov (United States)

    Miah, Andy

    2012-12-01

    This paper provides an overview of the ethical issues pertaining to the use of genetic insights and techniques in sport. Initially, it considers a range of scientific findings that have stimulated debate about the ethical issues associated with genetics applied to sport. It also outlines some of the early policy responses to these discoveries from world leading sports organizations, along with knowledge about actual use of gene technologies in sport. Subsequently, it considers the challenges with distinguishing between therapeutic use and human enhancement within genetic science, which is a particularly important issue for the world of sport. Next, particular attention is given to the use of genetic information, which raises questions about the legitimacy and reliability of genetic tests, along with the potential public value of having DNA databanks to economize in health care. Finally, the ethics of gene transfer are considered, inviting questions into the values of sport and humanity. It argues that, while gene modification may seem conceptually similar to other forms of doping, the requirements upon athletes are such that new forms of enhancement become increasingly necessary to discover. Insofar as genetic science is able to create safer, more effective techniques of human modification, then it may be an appealing route through which to modify athletes to safeguard the future of elite sports as enterprises of human excellence.

  16. Standard-C hydrogen monitoring system acceptance test procedure

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, T.C.

    1994-09-02

    The primary function of the standard-C hydrogen monitoring system (SHMS) is to monitor specifically for hydrogen in the waste tank atmosphere which may also contain (but not be limited to) unknown quantities of air, nitrous oxide, ammonia, water vapor, carbon dioxide, carbon monoxide, and other gaseous constituents. The SHMS will consist of hydrogen specific monitors, a grab sampler to collect samples for laboratory analysis, a gas chromatograph, and the gas sample collection system necessary to support the operation of the instrumentation. This system will be located in a cabinet placed at the tank of interest. The purpose of this document is to demonstrate that the SHMS is constructed as intended by design.

  17. Testing the Standard Model with the Primordial Inflation Explorer

    Science.gov (United States)

    Kogut, Alan J.

    2011-01-01

    The Primordial Inflation Explorer is an Explorer-class mission to measure the gravity-wave signature of primordial inflation through its distinctive imprint on the linear polarization of the cosmic microwave background. PIXIE uses an innovative optical design to achieve background-limited sensitivity in 400 spectral channels spanning 2.5 decades in frequency from 30 GHz to 6 THz (1 cm to 50 micron wavelength). The principal science goal is the detection and characterization of linear polarization from an inflationary epoch in the early universe, with tensor-to-scalar ratio r < 10A{-3) at 5 standard deviations. The rich PIXIE data set will also constrain physical processes ranging from Big Bang cosmology to the nature of the first stars to physical conditions within the interstellar medium of the Galaxy. I describe the PIXIE instrument and mission architecture needed to detect the inflationary signature using only 4 semiconductor bolometers.

  18. Handover checklist: testing a standardization process in an Italian hospital

    Directory of Open Access Journals (Sweden)

    Ferorelli D

    2017-05-01

    Full Text Available Davide Ferorelli,1 Teresa Giandola,2 Mariangela Laterza,2 Biagio Solarino,2 Angela Pezzolla,3 Fiorenza Zotti,2 Alessandro Dell’Erba1 1Interdisciplinary Department of Medicine, 2Section of Legal Medicine, 3Department of Emergency and Organ Transplantation, University of Bari, Bari, Italy Objectives: This study aimed to standardize and rationalize the handover, a critical and essential moment in common health care practices, through the realization of an efficient and standardized checklist, which could be used daily to ensure complete, thorough and effective handover. The principal purpose of the implementation of the handover is to reduce errors due to superficial and insufficient communication.Methods: The “operative group” defined the phases to the realization of the delineated aims: at first, the direct observation and the consequent realization of a handover checklist model and then, the experimental phases (trials. The handover checklist model was used for a month and it was daily and duly completed by the doctors who took part in the trial. To prove the success of the study, three questionnaires were distributed on different occasions.Results: Analyzing the answers to the questionnaires, the importance of the handover has come to light and that for the most part, the doctors consider it an essential and irreplaceable moment in daily health care work. Moreover, it became obvious that the use of the handover checklist guaranteed a considerable improvement in the traditional handover in terms of security, completeness, care continuity and clarity. The handover checklist was completely appreciated by the majority of the participant doctors who agree with the definitive introduction of it in their unit.Conclusions: Our study indicated the consistency of the handover checklist as an instrument to implement the handover and, indirectly, to improve the quality of the care. Keywords: clinical risk management, handover checklist, health care

  19. SPORT AND EXERCISE PSYCHOLOGY

    Directory of Open Access Journals (Sweden)

    Andy Lane

    2008-09-01

    Full Text Available DESCRIPTION The book introduces the undergraduate psychology student to both academic and professional aspects of Sport and Exercise Psychology. It uses up to date research evidence, established theory and a variety of activities that help the student consider and understand academic and professional aspects of this particular academic discipline. PURPOSE The book aims to provide the undergraduate psychology student with a structured introduction to the subject area and an insight into the theoretical evidence and practical suggestions that underpin what a Sport and Exercise psychologist does. The book also aims to support one term or one semester courses in Sport and Exercise Psychology. It is also appropriate for Masters level courses. FEATURES The book begins with a chapter on applied sports psychology to give the reader an insight into the domain of sport psychology, providing an overview of the techniques that could be used. The next three chapters focus on mood, anxiety and self confidence, which influence performance. This leads on to four chapters that focus on managing psychological states. There is also a chapter on leadership which interestingly includes leadership development in coaches and in athletes. Two chapters focus on the effects of exercise on psychological states, providing a balance between the benefits and potential drawbacks. The final chapter examines the issue of placebo effects. Throughout each chapter there are useful activities than can help the reader's understanding of practical and theoretical issues. These also have practical implications for the work of a Sport and Exercise Psychologist. Key ethical issues are raised on a regular basis throughout the text. The book offers an excellent blend of theory and practical suggestions which are critically discussed thus giving valuable insights regarding the research process and applied practice which is often lacking in the more well known standard textbooks for Sport

  20. Examining multidimensional sport-confidence in athletes and non-athlete sport performers.

    Science.gov (United States)

    Machida, Moe; Otten, Mark; Magyar, T Michelle; Vealey, Robin S; Ward, Rose Marie

    2017-03-01

    Sport-confidence is considered a critical success factor for sport performers at all levels. Researchers have suggested that sport-confidence is a multidimensional rather than a unidimensional construct, and the sport-confidence model identified three types of sport-confidence (i.e., physical skills and training, cognitive efficiency, and resilience) that are important for success in sport. However, such multidimensionality of sport-confidence and its measurement have not been fully examined. On a large sample of sport performers with varied skill levels and characteristics, the purpose of the present study was to examine the three-factor model of sport-confidence. We tested the measurement invariance of the Sport-Confidence Inventory across 512 athletes and 1170 non-athlete sport performers. Results from the multiple group model analysis showed that the three-factor model of sport-confidence fit better for the athlete sample than for the non-athlete sample. The results implicate that the three-factor model of sport-confidence model is suitable to athletes, though sport-confidence may appear more unidimensional for non-athletes. The use of the Sport-Confidence Inventory for non-athlete sport performers demands further consideration; however, the findings implicate that it could be a useful tool to assess sport-confidence of sport performers at any levels.

  1. Chickadees fail standardized operant tests for octave equivalence.

    Science.gov (United States)

    Hoeschele, Marisa; Weisman, Ronald G; Guillette, Lauren M; Hahn, Allison H; Sturdy, Christopher B

    2013-07-01

    Octave equivalence occurs when an observer judges notes separated by a doubling in frequency perceptually similar. The octave appears to form the basis of pitch change in all human cultures and thus may be of biological origin. Previously, we developed a nonverbal operant conditioning test of octave generalization and transfer in humans. The results of this testing showed that humans with and without musical training perceive the octave relationship between pitches. Our goal in the current study was to determine whether black-capped chickadees, a North American songbird, perceive octave equivalence. We chose these chickadees because of their reliance on pitch in assessing conspecific vocalizations, our strong background knowledge on their pitch height perception (log-linear perception of frequency), and the phylogenetic disparity between them and humans. Compared to humans, songbirds are highly skilled at using pitch height perception to classify pitches into ranges, independent of the octave. Our results suggest that chickadees used that skill, rather than octave equivalence, to transfer the note-range discrimination from one octave to the next. In contrast, there is evidence that at least some mammals, including humans, do perceive octave equivalence.

  2. Sport Management.

    Science.gov (United States)

    Parkhouse, Bonnie L., Ed.; And Others

    1984-01-01

    Traditional teaching and coaching positions have become scarce but the expanding field of sport management has created its own job market, demanding new skills and preparation. Three articles are offered that explore different aspects and possibilities for a sport management career. (DF)

  3. Sports Nutrition.

    Science.gov (United States)

    Missouri State Dept. of Health, Jefferson City.

    This guide deals with various aspects of sports and nutrition. Twelve chapters are included: (1) "Sports and Nutrition"; (2) "Eat to Compete"; (3) "Fit Folks Need Fit Food"; (4) "The Food Guide Pyramid"; (5) "Fat Finder's Guide"; (6) "Pre- and Post-Event Meals"; (7) "Tips for the…

  4. Sport Toekomstverkenning

    NARCIS (Netherlands)

    Marieke van Bakel; Ine Pulles; Annet Tiessen-Raaphorst; Frank den Hertog; Robert Vonk; Casper Schoemaker

    2017-01-01

    Deze publicatie verschijnt enkel digitaal op www.sporttoekomstverkenning.nl. Welke maatschappelijke veranderingen beïnvloeden de sport in Nederland? Waar gaat het heen met de sport tussen nu en 2040? Welke kansen, maar ook keuzes biedt dit voor de sportsector en het sportbeleid? Deze vragen

  5. Determining eye-hand coordination using the sport vision trainer: an evaluation of test-retest reliability.

    Science.gov (United States)

    Ellison, Paul H; Sparks, S Andy; Murphy, Philip N; Carnegie, Evelyn; Marchant, David C

    2014-01-01

    The purpose of this investigation was to assess the number of test-retest trials required to familiarize participants in order to provide acceptable reliability for the measurement of an eye-hand coordination task using the Sport Vision Trainer (SVT). Two schedules were conducted (S1 and S2). For S1, 64 participants (male n = 51, age 20.8 ± 4.9 years; female n = 13, age 20.1 ± 2.1 years) attended four sessions each 1 week apart, and undertook four trials using the SVT. For S2, 60 participants (male n = 46, age 20.8 ± 4.9 years; female n = 14, age 20.1 ± 2.1 years) attended one 20-minute schedule consisting of four consecutive trials using the SVT. Limits of agreement (LoA) analyses showed that absolute reliability was increased in both studies. The LoA for S2 indicate that error decreased between trial 1-2, 2-3, and 3-4; ± 0.95 (CI, -1.16, +2.56sec), ± 0.97 (CI, -1.66, +2.14sec), ± 0.69 (CI, -1.08, +1.62sec). It was concluded that reliable measurements of eye-hand coordination can be obtained using the SVT in one session.

  6. Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 This test method is applicable to the isotopic analysis of uranium hexafluoride (UF6) with 235U concentrations less than or equal to 5 % and 234U, 236U concentrations of 0.0002 to 0.1 %. 1.2 This test method may be applicable to the analysis of the entire range of 235U isotopic compositions providing that adequate Certified Reference Materials (CRMs or traceable standards) are available. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety health practices and determine the applicability of regulatory limitations prior to use.

  7. Sweat test for cystic fibrosis: Wearable sweat sensor vs. standard laboratory test.

    Science.gov (United States)

    Choi, Dong-Hoon; Thaxton, Abigail; Jeong, In Cheol; Kim, Kain; Sosnay, Patrick R; Cutting, Garry R; Searson, Peter C

    2018-03-23

    Sweat chloride testing for diagnosis of cystic fibrosis (CF) involves sweat induction, collection and handling, and measurement in an analytical lab. We have developed a wearable sensor with an integrated salt bridge for real-time measurement of sweat chloride concentration. Here, in a proof-of-concept study, we compare the performance of the sensor to current clinical practice in CF patients and healthy subjects. Sweat was induced on both forearms of 10 individuals with CF and 10 healthy subjects using pilocarpine iontophoresis. A Macroduct sweat collection device was attached to one arm and sweat was collected for 30 min and then sent for laboratory analysis. A sensor was attached to the other arm and the chloride ion concentration monitored in real time for 30 min using a Bluetooth transceiver and smart phone app. Stable sweat chloride measurements were obtained within 15 min following sweat induction using the wearable sensor. We define the detection time as the time at which the standard deviation of the real-time chloride ion concentration remained below 2 mEq/L for 5 min. The sweat volume for sensor measurements at the detection time was 13.1 ± 11.4 μL (SD), in many cases lower than the minimum sweat volume of 15 μL for conventional testing. The mean difference between sweat chloride concentrations measured by the sensor and the conventional laboratory practice was 6.2 ± 9.5 mEq/L (SD), close to the arm-to-arm variation of about 3 mEq/L. The Pearson correlation coefficient between the two measurements was 0.97 highlighting the excellent agreement between the two methods. A wearable sensor can be used to make real-time measurements of sweat chloride within 15 min following sweat induction, requiring a small sweat volume, and with excellent agreement to standard methods. Copyright © 2018 European Cystic Fibrosis Society. Published by Elsevier B.V. All rights reserved.

  8. Standard Guide for Benchmark Testing of Light Water Reactor Calculations

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This guide covers general approaches for benchmarking neutron transport calculations in light water reactor systems. A companion guide (Guide E2005) covers use of benchmark fields for testing neutron transport calculations and cross sections in well controlled environments. This guide covers experimental benchmarking of neutron fluence calculations (or calculations of other exposure parameters such as dpa) in more complex geometries relevant to reactor surveillance. Particular sections of the guide discuss: the use of well-characterized benchmark neutron fields to provide an indication of the accuracy of the calculational methods and nuclear data when applied to typical cases; and the use of plant specific measurements to indicate bias in individual plant calculations. Use of these two benchmark techniques will serve to limit plant-specific calculational uncertainty, and, when combined with analytical uncertainty estimates for the calculations, will provide uncertainty estimates for reactor fluences with ...

  9. Design and testing of multi-standard waveguide couplers.

    Science.gov (United States)

    Beeson, S; Neuber, A

    2012-03-01

    Most applications that use waveguides are designed for a single frequency or single band of frequency, and thus the waveguide dimensions are chosen for single mode operation. In special cases where multiple frequencies across multiple bands are needed (i.e., probing the temporal response of decaying plasma using a cw source that is generated by a pulsed source), special techniques must be used in order to implement both sources into a single waveguide structure. This paper presents two types of couplers designed to implement x-band frequencies into an s-band system with a large coupling coefficient ( -10 dB) at the design frequency of 11 GHz. Along with a discussion on the design procedure, a detailed description on the parameter optimization and initial values estimation is presented. The custom waveguide structures were tested utilizing an Agilent E8364B PNA network analyzer, and showed reasonable agreement with the simulated performance over the frequency range of interest.

  10. LHC BLM Single Channel Connectivity Test using the Standard Installation

    CERN Document Server

    Emery, J; Effinger, E; Ferioli, G; Zamantzas, C; Ikeda, H; Verhagen, E

    2009-01-01

    For the LHC Beam Loss Measurement system (BLM), the high voltage supply of the ionisation chambers and the secondary emission detectors is used to test their connectivity. A harmonic modulation of 0.03 Hz results in a current signal of about 100pA measured by the beam loss acquisition electronics. The signal is analyzed and the measured amplitude and phase are compared with individual channel limits for the 4000 channels. It is foreseen to execute an automatic procedure for all channels every 12 hours which takes about 20 minutes. The paper will present the design of the system, the circuit simulations, measurements of systematic dependencies of different channels and the reproducibility of the amplitude and phase measurements.

  11. Standards for measurements and testing of wind turbine power quality

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, P. [Risoe National Lab., Roskilde (Denmark); Gerdes, G.; Klosse, R.; Santjer, F. [DEWI, Wilhelmshaven (Germany); Robertson, N.; Davy, W. [NEL, Glasgow (United Kingdom); Koulouvari, M.; Morfiadakis, E. [CRES, Pikermi (Greece); Larsson, Aa. [Chalmers Univ. of Technology, Goeteborg (Sweden)

    1999-03-01

    The present paper describes the work done in power quality sub-task of the project `European Wind Turbine Testing Procedure Developments` funded by the EU SMT program. The objective of the power quality sub-task has been to make analyses and new recommendation(s) for the standardisation of measurement and verification of wind turbine power quality. The work has been organised in three major activities. The first activity has been to propose measurement procedures and to verify existing and new measurement procedures. This activity has also involved a comparison of the measurements and data processing of the participating partners. The second activity has been to investigate the influence of terrain, grid properties and wind farm summation on the power quality of wind turbines with constant rotor speed. The third activity has been to investigate the influence of terrain, grid properties and wind farm summation on the power quality of wind turbines with variable rotor speed. (au)

  12. Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This test method determines the degree of linearity of a photovoltaic device parameter with respect to a test parameter, for example, short-circuit current with respect to irradiance. 1.2 The linearity determined by this test method applies only at the time of testing, and implies no past or future performance level. 1.3 This test method applies only to non-concentrator terrestrial photovoltaic devices. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  13. Sport-specific fitness testing differentiates professional from amateur soccer players where VO2max and VO2 kinetics do not.

    Science.gov (United States)

    Wells, C M; Edwards, A M; Winter, E M; Fysh, M L; Drust, B

    2012-06-01

    The purpose of this study was to identify if sport-specific and cardiopulmonary exercise testing differentiated professional from amateur soccer players. Thirty six men comprising 18 professional (mean±s: age 23.2±2.4 years) and 18 amateur (mean±SD: age 21.1±1.6 years) soccer players participated and performed four tests on separate occasions: 1) a graded exercise test to determine VO2max; 2) four exercise transients from walking to 80%Δ for the determination of VO2 kinetics; 3) the Yo-Yo Intermittent Recovery Test level 2 (Yo-Yo IR2) and 4) a repeated sprint test (RST). The players did not differ in VO2max (professional 56.5±2.9 mL.kg-1.min-1; amateur 55.7±3.5 mL.kg-1.min-1: P=0.484) or VO2 kinetic fundamental measures (τ1 onset, professional 24.5±3.2 s; amateur 24.0±1.8 s: τ1 cessation, professional 28.7±2.8 s; amateur 29.3±3.5 s: P=0.923). However, the amateurs were outperformed in the Yo-Yo IR2 (Professional 966±153 m; Amateur 840±156 m) (P=0.034) and RST (best time, professional 6.46±0.27 s; amateur 6.84±0.24 s, P=0.012). Performance indices derived from field-based sport-specific performance tests identified significant differences between professional and amateur players (P<0.05). However, neither tests of VO2 kinetics nor VO2max differentiated between groups, suggesting laboratory tests of cardiorespiratory parameters are probably less consequential to soccer than sport-specific field-based observations.

  14. Differential diagnostics of the musculoskeletal system in sports medicine

    International Nuclear Information System (INIS)

    Nehrer, S.

    2010-01-01

    The positive effects of sports on the cardiovascular and musculoskeleal systems are widely accepted. Nevertheless, sports also can cause injury and overuse leading to sport-specific problems, which are often a challenge in diagnosing and treatment. The history of the sport-related injury is crucial for further differential diagnosis. Careful inspection, palpation and functional testing can reveal the possible pathology and lead to an effective strategy in the diagnostic assessment using radiographic tools such as sonography, X-ray and MR imaging (MRI). In muscle and tendon injuries sonography can provide ready to use information concerning muscle tears and tendon ruptures or degenerative lesions. Plain X-rays give a good overview on joint conditions regarding the bone and sometimes have to be completed by focused enlargement of the critical structure, especially in stress fractures and small bone lesions. MRT is the gold standard in the evaluation of interarticular and extra-articular sport-related pathologies, however, an exact clinical diagnosis allows a more effective investigation protocol. Profound knowledge of possible sport-specific injury and overuse patterns is necessary to detect lesions of the musculoskeletal system in active athletes and to use the fitting radiographic strategy for confirmation. The exact diagnosis is the prerequisite for initiating the appropriate treatment and a fast sports medical rehabilitation process. (orig.) [de

  15. Teaching Sport as History, History through Sport

    Science.gov (United States)

    Wheeler, Robert F.

    1978-01-01

    Describes an undergraduate history course based on two themes: sport as a reflection of society and sport as a socializing agent affecting society. The course focuses on sports and industrialization, traditional and modern sports, political and economic aspects of sport, and inequality and discrimination in sports. (Author/JK)

  16. 16 CFR 1610.35 - Procedures for testing special types of textile fabrics under the standard.

    Science.gov (United States)

    2010-01-01

    ... textile fabrics under the standard. 1610.35 Section 1610.35 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FLAMMABLE FABRICS ACT REGULATIONS STANDARD FOR THE FLAMMABILITY OF CLOTHING TEXTILES Rules and Regulations § 1610.35 Procedures for testing special types of textile fabrics under the standard. (a) Fabric...

  17. Standard tests for the characterization of roofing slate pathologies

    Directory of Open Access Journals (Sweden)

    Cárdenes, V.

    2012-06-01

    Full Text Available The pathologies formed in slate roofs are mainly due to the presence of potentially unstable minerals (iron sulfides, carbonates and organic matter. These minerals may become altered by the effect of environmental agents, once the slate roof is finished. The pathologies are mainly associated with oxidation and gypsification processes of the cited mineral phases. In this work, the potential pathologies of several Spanish roofing slates are identified, using the tests defined in the European Norms EN 12326:2005, 14147:2004 and 11597:2007.

    Las patologías que se originan en pizarra para cubiertas son debidas fundamentalmente a la presencia de materiales alterables (sulfuros de hierro, carbonatos y materia orgánica. Estos minerales pueden llegar a alterarse por efecto de los agentes medioambientales, una vez que la pizarra es puesta en obra. Las patologías están principalmente asociadas a procesos de oxidación y yesificación de las citadas fases minerales. En este trabajo se determinan las patologías potenciales de varias pizarras para cubiertas españolas, utilizando los ensayos definidos en las normas UNE-EN 12326:2005, 14147:2004 y 11597:2007.

  18. THE PHILOSOPHY OF EDUCATION AND SPORT

    OpenAIRE

    Jovo Radoš

    2006-01-01

    Sports education (training in physical education, development of physical skills and acquiring sports habits) is, according to accepted international standards, considered an essential component of education. However, not only the experience we have, but contemporary tendencies in sport (different deviations and failure of established educational-moral principles) as well confront us with the following question: Can sport still meet requirements in the process of education? The answer can be ...

  19. 78 FR 17875 - Commercial Driver's License Testing and Commercial Learner's Permit Standards

    Science.gov (United States)

    2013-03-25

    ... [Docket No. FMCSA-2007-27659] RIN 2126-AB59 Commercial Driver's License Testing and Commercial Learner's.... The 2011 final rule amended the commercial driver's license (CDL) knowledge and skills testing standards and established new minimum Federal standards for States to issue the commercial learner's permit...

  20. 77 FR 26989 - Commercial Driver's License Testing and Commercial Learner's Permit Standards

    Science.gov (United States)

    2012-05-08

    ... [Docket No. FMCSA-2007-27659] RIN 2126-AB02 Commercial Driver's License Testing and Commercial Learner's... effective on July 8, 2011. That final rule amended the commercial driver's license (CDL) knowledge and skills testing standards and established new minimum Federal standards for States to issue the commercial...

  1. Political Judgement, Freedom of Thought, and Standardized Testing: A Critical Enquiry

    Science.gov (United States)

    Schuler, Matthew Edward

    2012-01-01

    The practice of "standardized" testing has been embedded in United States federal education policy since at least the passage of the Elementary and Secondary Education Act of 1965. The roots of standardized testing in American education, grounded in Kantian "Modern Thought," can be traced to the U.S. Military Academy at…

  2. Standard testing procedures for optical fiber and unshielded twisted pair at Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Adams, R.L.

    1993-11-01

    This document will establish a working standard for testing optical fiber and unshielded twisted pair cables included in the Lab-wide telecommunications cabling system. The purpose of these standard testing procedures is to deliver to all Sandians a reliable, low-maintenance, state-of-the-art, ubiquitous telecommunications cabling infrastructure capable of satisfying all current and future telecommunication needs.

  3. EPIDEMIOLOGY OF PEDIATRIC SPORTS INJURIES: INDIVIDUAL SPORTS

    Directory of Open Access Journals (Sweden)

    Dennis J. Caine

    2005-06-01

    Full Text Available The objective of the book is to review comprehensively what is known about the distribution and determinants of injury rates in a variety of individual sports, and to suggest injury prevention measures and guidelines for further research. This book provides comprehensive compilation and critical analysis of epidemiological data over children's individual sports: including equestrian, gymnastics, martial arts, skiing and snowboarding, tennis, track and field, and wrestling. This book encourages coaches and sports administrators to discuss rules, equipment standards, techniques, and athlete conditioning programs. In turn, they can inform parents about the risks and how they can help their children avoid or limit injury in sports. A common, uniform strategy and evidence-based approach to organizing and interpreting the literature is used in all chapters. All the sports-specific chapters are laid out with the same basic headings, so that it is easy for the reader to find common information across chapters. Chapter headings are: 1 Epidemiology of children's individual sports injuries, 2 Equestrian injuries, 2 Gymnastics injuries, 3 Martial arts injuries, 4 Skiing and snowboard injuries, 5 Tennis injuries, 6 Track and field injuries, 7 Wrestling injuries, 8 Injury prevention and future research. Chapter headings include: i Incidence of injury, ii Injury characteristics, iii Injury severity, iv njury risk factors, v Suggestions for injury prevention, vi Suggestions for further research. In each sports-specific chapter, an epidemiological picture has been systematically developed from the data available in prospective cohort, retrospective cohort, case-control, and cross-sectional studies. The tables are numerous, helpful and very useful. The book provides a very useful resource for sport scientist, pediatricians, family practitioners and healthcare professionals in the field of child and adolescent injury and prevention The readers are going to

  4. Tests and indicators for improving the pedagogical control of the legs force of long and middle distance, as well as sport walk 12-15 school categories athletes

    Directory of Open Access Journals (Sweden)

    Ernesto Santana-García

    2014-04-01

    Full Text Available The control of the yield inside the process of sport training is one of the instruments that guarantee that it is made on the base of solid arguments as for the correspondence among the loads or preparation stimuli that must receive the sportsman and its condition to assimilate it. Due to the deficiencies, detected during a preliminary diagnosis based on the content analysis, measurement and mathematical statistical methods that corroborate the necessity to perfect elements of the sportsmen preparation management, a study begins with the in o rde r to give solution to the scientific problem: How to improve the pedagogic control of the legs force on Long and Middle distance, as well as Sport Walk athletes at 12 - 15 yeas school categories from “Ormani Arenado” Initial Sport School of Pinar del Río? It has the objective to select tests and indicators that improve this pedagogic control. There were used different methods and investigation instruments such as, analysis and synthesis, the measurement, as well as the descriptive and inferential statistic, which allowed the selection of the test of the ten jumps to include it in the protocol of evaluation of the physical performance set for the school categories, with procedures that brings forth four indicators on the sportsman's state. Its feasibility is being evaluating at present in an extended study certified by the provincial commission of Athletics. The contributions of this research, favor to the results of the investigative project “The evaluation and planning of the training in Long and Middle distance, as well as Sport Walk athletes in Pinar del Río”, answering, at the same time, to the fourth technological demand of the Athletics in this western county of Cuba.

  5. Sport and team differences on baseline measures of sport-related concussion.

    Science.gov (United States)

    Zimmer, Adam; Piecora, Kyle; Schuster, Danielle; Webbe, Frank

    2013-01-01

    With the advent of the National Collegiate Athletic Association's (NCAA's) mandating the presence and practice of concussion-management plans in collegiate athletic programs, institutions will consider potential approaches for concussion management, including both baseline and normative comparison approaches. To examine sport and team differences in baseline performance on a computer-based neurocognitive measure and 2 standard sideline measures of cognition and balance and to determine the potential effect of premorbid factors sex and height on baseline performance. Cross-sectional study. University laboratory. A total of 437 NCAA Division II student-athletes (males = 273, females = 164; age = 19.61 ± 1.64 years, height = 69.89 ± 4.04 inches [177.52 ± 10.26 cm]) were recruited during mandatory preseason testing conducted in a concussion-management program. The computerized Concussion Resolution Index (CRI), the Standardized Assessment of Concussion (Form A; SAC), and the Balance Error Scoring System (BESS). Players on the men's basketball team tended to perform worse on the baseline measures, whereas soccer players tended to perform better. We found a difference in total BESS scores between these sports (P = .002). We saw a difference between sports on the hard-surface portion of the BESS (F6,347 = 3.33, P = .003, ηp(2) = 0.05). No sport, team, or sex differences were found with SAC scores (P > .05). We noted differences between sports and teams in the CRI indices, with basketball, particularly the men's team, performing worse than soccer (P sport differences, height was a covariate for the team (F1,385 = 5.109, P = .02, ηp(2) = 0.013) and sport (F1,326 = 11.212, P = .001, ηp(2) = 0.033) analyses, but the interaction of sex and sport on CRI indices was not significant in any test (P > .05). Given that differences in neurocognitive functioning and performance among sports and teams exist, the comparison of posttraumatic and baseline assessment may lead to more

  6. How fit are children and adolescents with haemophilia in Germany? Results of a prospective study assessing the sport-specific motor performance by means of modern test procedures of sports science.

    Science.gov (United States)

    Seuser, A; Boehm, P; Ochs, S; Trunz-Carlisi, E; Halimeh, S; Klamroth, R

    2015-07-01

    There are a lot of publications on the physical fitness of patients with haemophilia (PWH), however, most studies only reflect individual sport-specific motor capacities or focus on a single fitness ability. They involve small patient populations. In this respect principal objective of this study was to compare the physical fitness in all respects and the body composition of young PWH to healthy peers based on the most valid data we could get. Twenty-one German haemophilia treatment centres were visited from 2002 to 2009. PWH between 8 and 25 years were included. They performed a five-stage fitness test covering the sport-specific motor capacities for coordination, measured by one leg stand, strength, aerobic fitness and mobility as well as body composition. The patients' results were compared with age- and gender-specific reference values of healthy subjects. Two hundred and eighty-five PWH (mean age 13.2 ± 4.5 years, 164 PWH with severe disease) were included prospectively in the study. PWH are significantly below the reference values of healthy subjects in the one-leg stand test, the mobility of the lower extremity, the strength ratio of chest and back muscles and the endurance test. In body composition, the back strength and the mobility of the upper extremity PWH are significantly above the reference values. There are no significant differences in abdominal strength. In conclusion we found specific differences in different fitness abilities between PWH and healthy subjects. Knowing this, we are able to work out exercise programmes to compensate the diminished fitness abilities for our PWH. © 2015 John Wiley & Sons Ltd.

  7. Standard test method for ball punch deformation of metallic sheet material

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method covers the procedure for conducting the ball punch deformation test for metallic sheet materials intended for forming applications. The test applies to specimens with thicknesses between 0.008 and 0.080 in. (0.20 and 2.00 mm). 1.2 The values stated in inch–pound units are to be regarded as the standard. Note 1—The ball punch deformation test is intended to replace the Olsen cup test by standardizing many of the test parameters that previously have been left to the discretion of the testing laboratory. Note 2—The modified Erichsen test has been standardized in Europe. The main differences between the ball punch deformation test and the Erichsen test are the diameters of the penetrator and the dies. Erichsen cup heights are given in SI units. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does...

  8. Nuclear medicine in sports

    International Nuclear Information System (INIS)

    Sharma, Anshu Rajnish

    2010-01-01

    Nuclear medicine can synergistically contribute to the sports medicine field, in the management of sports-related stress injures. Bone scintigraphy is commonly requested for evaluation of athletes with pain. Three-Phase 99m Tc MDP Bone Scan has emerged as the imaging reference standard for diagnosing such injuries. The inherently high-contrast resolution of the bone scan allows early detection of bone trauma and becomes positive within six to seventy-two hours after the onset of symptoms. The bone scan is able to demonstrate stress injuries days to weeks before the radiograph

  9. Consequences of different diagnostic "gold standards" in test accuracy research: Carpal Tunnel Syndrome as an example.

    Science.gov (United States)

    Bachmann, Lucas M; Jüni, Peter; Reichenbach, Stephan; Ziswiler, Hans-Rudolf; Kessels, Alfons G; Vögelin, Esther

    2005-08-01

    Test accuracy studies assume the existence of a well-defined illness definition and clear-cut diagnostic gold standards or reference standards. However, in clinical reality illness definitions may be vague or a mere description of a set of manifestations, mostly clinical signs and symptoms. This can lead to disagreements among experts about the correct classification of an illness and the adequate reference standard. Using data from a diagnostic accuracy study in carpal tunnel syndrome, we explored the impact of different definitions on the estimated test accuracy and found that estimated test performance characteristics varied considerably depending on the chosen reference standard. In situations without a clear-cut illness definition, randomized controlled trials may be preferable to test accuracy studies for the evaluation of a novel test. These studies do not determine the diagnostic accuracy, but the clinical impact of a novel test on patient management and outcome.

  10. Result of standard patch test in patients suspected of having allergic contact dermatitis.

    Science.gov (United States)

    Wongpiyabovorn, Jongkonnee; Puvabanditsin, Porntip

    2005-09-01

    Contact dermatitis is a common skin disease. Disease was diagnosed by a history of contact substance together with geographic distribution of lesion. Up till now, standard patch test is one of the most reliable test to identify and confirm causative agent of allergic contact dermatitis. To determine the rate of positive standard patch test and to identify the common allergen of contact dermatitis in Thailand, we performed the standard patch test in 129 patients, suspected having allergic contact dermatitis at Department of Dermatology, King Chulalongkorn Memorial Hospital, Thailand from June 1, 2003 to September 1, 2004. The rate of positive standard patch test is 59.7% (n = 77/129). The most 3 common positive allergens were nickel sulfate (18.60%), cobalt chloride (17.05%) and fragrance mix (14.73%), respectively. The chance of positive standard patch test significantly correlated with sex (woman), initial diagnosis as contact dermatitis and history of house-worker (p = 0.017, p = 0.005 and p = 0.023, respectively). Whereas, there were no significant correlation between the chance of positive standard patch test and age of patient, location of lesion, history of recurrence, history of atopy, history of drug and food allergy. In addition, history of metal allergy significantly correlated with the chance of positive nickel sulfate or cobalt chloride in standard patch test (p = 0.017). In conclusion, this study demonstrated the prevalence of causative allergen of contact dermatitis in Thai patients using that standard patch test. Moreover, our data shown that the chance positive standard patch test was greater in patient, who were women or initial diagnosed as contact dermatitis or had history of houseworker or history of metal allergy.

  11. Sport Psychology.

    Science.gov (United States)

    Krotee, March L.

    1980-01-01

    Sport psychology is defined in terms of human behavior in athletic situations. The psychosocial cross-cultural setting provides a model for studying trait and state psychosocial attributes and suggests issues and concerns for further study. (JMF)

  12. [Sports purpura].

    Science.gov (United States)

    Kluger, Nicolas

    2012-10-01

    Recreational or regular physical and sport activities may be responsible for a wide range of cutaneous complications. Among them, "sports purpura" is a peculiar symptom that can occur during a large number of sports. "Effort purpura" defines any purpura occurring within the context of physical exercise irrespective of its cause. Therefore this clinical diagnosis includes various aetiologies. Diagnosis of traumatic purpura is often easy if the sport is mentioned in the anamnesis; cutaneous exercise - induced vasculitis must be also noted. Purpura can reveal systemic diseases or internal haemorrhage, such as spleen rupture, thrombopathies or systemic vasculitis, and other effort purpuras must be taken into account, including those related to the environment (cold, sun exposure...). Knowledge of a physical activity before the occurrence of purpura should be known by practitioner to avoid unnecessary and costly explorations in most of the cases. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

  13. Sport Technology

    CSIR Research Space (South Africa)

    Kirkbride, T

    2007-11-01

    Full Text Available Technology is transforming the games themselves and at times with dire consequences. Tony Kirkbride, Head: CSIR Technology Centre said there are a variety of sports technologies and there have been advances in material sciences and advances...

  14. Rapportage sport 2008

    NARCIS (Netherlands)

    Koen Breedveld; Carlijn Kamphuis; Annet Tiessen-Raaphorst

    2008-01-01

    Sport boeit. Sport bindt. Sport bevordert de gezondheid. En sport betaalt. Sport is anno 2008 ongekend populair. Tweederde van de Nederlanders doet aan sport. Na zwemmen en fietsen is fitness de meest populaire sport geworden. Daarnaast zetten anderhalf miljoen Nederlanders zich als vrijwilliger

  15. Sport-specific balance.

    Science.gov (United States)

    Zemková, Erika

    2014-05-01

    This review includes the latest findings based on experimental studies addressing sport-specific balance, an area of research that has grown dramatically in recent years. The main objectives of this work were to investigate the postural sway response to different forms of exercise under laboratory and sport-specific conditions, to examine how this effect can vary with expertise, and to provide examples of the association of impaired balance with sport performance and/or increasing risk of injury. In doing so, sports where body balance is one of the limiting factors of performance were analyzed. While there are no significant differences in postural stability between athletes of different specializations and physically active individuals during standing in a standard upright position (e.g., bipedal stance), they have a better ability to maintain balance in specific conditions (e.g., while standing on a narrow area of support). Differences in magnitude of balance impairment after specific exercises (rebound jumps, repeated rotations, etc.) and mainly in speed of its readjustment to baseline are also observed. Besides some evidence on an association of greater postural sway with the increasing risk of injuries, there are many myths related to the negative influence of impaired balance on sport performance. Though this may be true for shooting or archery, findings have shown that in many other sports, highly skilled athletes are able to perform successfully in spite of increased postural sway. These findings may contribute to better understanding of the postural control system under various performance requirements. It may provide useful knowledge for designing training programs for specific sports.

  16. Sports Accidents

    CERN Document Server

    Kiebel

    1972-01-01

    Le Docteur Kiebel, chirurgien à Genève, est aussi un grand ami de sport et de temps en temps médecin des classes genevoises de ski et également médecin de l'équipe de hockey sur glace de Genève Servette. Il est bien qualifié pour nous parler d'accidents de sport et surtout d'accidents de ski.

  17. CONCUSSION IN SPORT: PRACTICAL MANAGEMENT ...

    African Journals Online (AJOL)

    Enrique

    ed to physiological stress.2. Therefore, return-to-play guidelines include incremen- tal exercise testing to ensure that the concussed athlete does not develop a recur- rence of symptoms during physiological stress. RYAN M N KOHLER. MB ChB, MPhil (Sports Medicine). Sports Physician. UCT/MRC Research Unit for ...

  18. Goal striving, goal attainment, and well-being: adapting and testing the self-concordance model in sport.

    Science.gov (United States)

    Smith, Alison; Ntoumanis, Nikos; Duda, Joan

    2007-12-01

    Grounded in self-determination theory (Deci & Ryan, 1985) and the self-concordance model (Sheldon & Elliot, 1999), this study examined the motivational processes underlying goal striving in sport as well as the role of perceived coach autonomy support in the goal process. Structural equation modeling with a sample of 210 British athletes showed that autonomous goal motives positively predicted effort, which, in turn, predicted goal attainment. Goal attainment was positively linked to need satisfaction, which, in turn, predicted psychological well-being. Effort and need satisfaction were found to mediate the associations between autonomous motives and goal attainment and between attainment and well-being, respectively. Controlled motives negatively predicted well-being, and coach autonomy support positively predicted both autonomous motives and need satisfaction. Associations of autonomous motives with effort were not reducible to goal difficulty, goal specificity, or goal efficacy. These findings support the self-concordance model as a framework for further research on goal setting in sport.

  19. A Three-Wave Longitudinal Test of Self-Determination Theory's Mediation Model of Engagement and Disaffection in Youth Sport.

    Science.gov (United States)

    Curran, Thomas; Hill, Andrew P; Ntoumanis, Nikos; Hall, Howard K; Jowett, Gareth E

    2016-02-01

    Research adopting self-determination theory (SDT) supports a mediation model whereby coach motivational styles (autonomy support and interpersonal control) predict athletes' engagement and disaffection in youth sport via the satisfaction and frustration of psychological needs (autonomy, competence, and relatedness). Our study extends this research by examining SDT's mediation model longitudinally with three waves of data. Two hundred fifty-two youth sports participants (Mage = 12.98; SD = 1.84; range = 11-17; female n = 67) completed measures of study variables at the start, middle, and end of a competitive soccer season. Cross-lagged path analyses revealed that associations between the two coach motivational styles and athletes' engagement were mediated by psychological need satisfaction. Furthermore, a positive reciprocal association between psychological need satisfaction and engagement emerged over time. This study therefore supports the temporal assumptions underpinning SDT's mediation model but, importantly, evidences a mutually reinforcing interplay between athletes' psychological needs and their engaged behavior.

  20. Jump ergometer in sport performance testing Výskokový ergometr v diagnostice sportovní výkonnosti

    Directory of Open Access Journals (Sweden)

    Dušan Hamar

    2005-02-01

    Full Text Available The papers deals with the application of the jump ergometer in the evaluation of neuromuscular performance. Altogether 288 athletes of different sport specializations (mean age 18.9 ± 6.4 years, height 172.2 ± 4.3 cm, and weight 62.4 ± 4.9 kg underwent various tests on the jump ergometer, such as 10-, 60-, and 90-second repeated jumps, squat and countermovement jumps without and with an additional load, and drop jumps from different heights with and without bending the knees. The diagnostic system FiTRO Jumper consisting of a special contact switch mattress connected by means of an interface to a computer was used. Jump parameters (power in the active phase of take off and height of the jump were calculated from the flight and contact times. Results showed that the system may be applied for the assessment of explosive power of the lower extremities, strength endurance of the lower extremities, utilization of the stretch shortening cycle, distribution of fast twitch fibers, optimal drop jump height for plyometric training, and training effects, namely in sports such as basketball, volleyball, soccer, tennis, gymnastics, rock and roll, figure skating, track and field, ski jumping, weight lifting, etc. Práce poukazuje na možnosti uplatnění výskokového ergometru při posuzovaní odrazových schopností dolních končetin. Celkem 288 sportovců s různou specializací (průměrný věk 18,9 ± 6,4 let, výška 172,2 ± 4,3 cm, hmotnost 62,4 ± 4,9 kg absolvovalo testy na výskokovém ergometru, a to 10, 60 a 90sekundový test opakovaných snožných výskoků, výskoky bez a s protipohybem s hmotností vlastního těla, resp. s dodatečnou váhou, jakož i seskoky z různych výšek do rovných, resp. pokrčených dolních končetin. Parametry odrazových schopností (výkon v aktivní fázi odrazu a výška výskoku byly registrovány pomocí diagnostického systému FiTRO Jumper sestávajícího z odrazové doby napojené prost

  1. Standard Test Method for Testing Polymeric Seal Materials for Geothermal and/or High Temperature Service Under Sealing Stress

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1985-01-01

    1.1 This test method covers the initial evaluation of (screening) polymeric materials for seals under static sealing stress and at elevated temperatures. 1.2 This test method applies to geothermal service only if used in conjunction with Test Method E 1068. 1.3 The test fluid is distilled water. 1.4 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  2. Standard and prototype tests of hotwater- and steam-valves for nuclear power stations

    International Nuclear Information System (INIS)

    Dernbach, B.

    1977-11-01

    More than 150 standard and prototype valves have been tested in a special valve test facility (VTF) for reactor valve tests under working conditions. Approximately 85% of the valves performed well for the given task, in some cases however only after numerous improvements jointly done with the manufactures; 15% turned out to be unserviceable. (orig.) [de

  3. Non-invasive measurement of adrenal response after standardized exercise tests in prepubertal children

    NARCIS (Netherlands)

    Heijsman, Sigrid M.; Koers, Nicoline F.; Bocca, Gianni; van der Veen, Betty S.; Appelhof, Maaike; Kamps, Arvid W. A.

    Objective: To determine the feasibility of non-invasive evaluation of adrenal response in healthy prepubertal children by standardized exercise tests. Methods: On separate occasions, healthy prepubertal children performed a submaximal cycling test, a maximal cycling test, and a 20-m shuttle-run

  4. Standard Setting in Specific-Purpose Language Testing: What Can a Qualitative Study Add?

    Science.gov (United States)

    Manias, Elizabeth; McNamara, Tim

    2016-01-01

    This paper explores the views of nursing and medical domain experts in considering the standards for a specific-purpose English language screening test, the Occupational English Test (OET), for professional registration for immigrant health professionals. Since individuals who score performances in the test setting are often language experts…

  5. Development of Proposed Standards for Testing Solar Collectors and Thermal Storage Devices. NBS Technical Note 899.

    Science.gov (United States)

    Hill, James E.; And Others

    A study has been made at the National Bureau of Standards of the different techniques that are or could be used for testing solar collectors and thermal storage devices that are used in solar heating and cooling systems. This report reviews the various testing methods and outlines a recommended test procedure, including apparatus and…

  6. High-Stakes Standardized Testing & Marginalized Youth: An Examination of the Impact on Those Who Fail

    Science.gov (United States)

    Kearns, Laura-Lee

    2011-01-01

    This study examines the impact of high-stakes, large-scale, standardized literacy testing on youth who have failed the Ontario Secondary School Literacy Test. Interviews with youth indicate that the unintended impact of high-stakes testing is more problematic than policy makers and educators may realize. In contrast to literacy policy's aims to…

  7. Standardized tests of handwriting readiness: a systematic review of the literature

    NARCIS (Netherlands)

    Hartingsveldt, M.J. van; Groot, I.J.M. de; Aarts, P.B.M.; Nijhuis-Van der Sanden, M.W.G.

    2011-01-01

    AIM: To establish if there are psychometrically sound standardized tests or test items to assess handwriting readiness in 5- and 6-year-old children on the levels of occupations activities/tasks and performance. METHOD: Electronic databases were searched to identify measurement instruments. Tests

  8. Standardized Tests of Handwriting Readiness: A Systematic Review of the Literature

    Science.gov (United States)

    van Hartingsveldt, Margo J.; de Groot, Imelda J. M.; Aarts, Pauline B. M.; Nijhuis-van der Sanden, Maria W. G.

    2011-01-01

    Aim: To establish if there are psychometrically sound standardized tests or test items to assess handwriting readiness in 5- and 6-year-old children on the levels of occupations activities/tasks and performance. Method: Electronic databases were searched to identify measurement instruments. Tests were included in a systematic review if: (1)…

  9. AN INITIAL EVALUATION OF THE BTRACKS BALANCE PLATE AND SPORTS BALANCE SOFTWARE FOR CONCUSSION DIAGNOSIS.

    Science.gov (United States)

    Goble, Daniel J; Manyak, Kristin A; Abdenour, Thomas E; Rauh, Mitchell J; Baweja, Harsimran S

    2016-04-01

    As recently dictated by the American Medical Society, balance testing is an important component in the clinical evaluation of concussion. Despite this, previous research on the efficacy of balance testing for concussion diagnosis suggests low sensitivity (∼30%), based primarily on the popular Balance Error Scoring System (BESS). The Balance Tracking System (BTrackS, Balance Tracking Systems Inc., San Diego, CA, USA) consists of a force plate (BTrackS Balance Plate) and software (BTrackS Sport Balance) which can quickly (balance testing with gold standard accuracy. The present study aimed to determine the sensitivity of the BTrackS Balance Plate and Sports Balance Software for concussion diagnosis. Cross-Sectional Study. Preseason baseline balance testing of 519 healthy Division I college athletes playing sports with a relatively high risk for concussions was performed with the BTrackS Balance Test. Testing was administered by certified athletic training staff using the BTrackS Balance Plate and Sport Balance software. Of the baselined athletes, 25 later experienced a concussion during the ensuing sport season. Post-injury balance testing was performed on these concussed athletes within 48 of injury and the sensitivity of the BTrackS Balance Plate and Sport Balance software was estimated based on the number of athletes showing a balance decline according to the criteria specified in the Sport Balance software. This criteria is based on the minimal detectable change statistic with a 90% confidence level (i.e. 90% specificity). Of 25 athletes who experienced concussions, 16 had balance declines relative to baseline testing results according to the BTrackS Sport Balance software criteria. This corresponds to an estimated concussion sensitivity of 64%, which is twice as great as that reported previously for the BESS. The BTrackS Balance Plate and Sport Balance software has the greatest concussion sensitivity of any balance testing instrument reported to date. Level 2

  10. Test Anxiety and a High-Stakes Standardized Reading Comprehension Test: A Behavioral Genetics Perspective

    Science.gov (United States)

    Wood, Sarah G.; Hart, Sara A.; Little, Callie W.; Phillips, Beth M.

    2016-01-01

    Past research suggests that reading comprehension test performance does not rely solely on targeted cognitive processes such as word reading, but also on other nontarget aspects such as test anxiety. Using a genetically sensitive design, we sought to understand the genetic and environmental etiology of the association between test anxiety and…

  11. ERS technical standard on bronchial challenge testing : General considerations and performance of methacholine challenge tests

    NARCIS (Netherlands)

    Coates, Allan L.; Wanger, Jack; Cockcroft, Donald W.; Culver, Bruce H.; Carlsen, Kai-Hakon; Diamant, Zuzana; Gauvreau, Gail; Hall, Graham L.; Hallstrand, Teal S.; Horvath, Ildiko; de Jongh, Frans H. C.; Joos, Guy; Kaminsky, David A.; Laube, Beth L.; Leuppi, Joerg D.; Sterk, Peter J.

    This international task force report updates general considerations for bronchial challenge testing and the performance of the methacholine challenge test. There are notable changes from prior recommendations in order to accommodate newer delivery devices. Rather than basing the test result upon a

  12. ERS technical standard on bronchial challenge testing: general considerations and performance of methacholine challenge tests

    NARCIS (Netherlands)

    Coates, Allan L.; Wanger, Jack; Cockcroft, Donald W.; Culver, Bruce H.; Diamant, Zuzana; Gauvreau, Gail; Hall, Graham L.; Hallstrand, Teal S.; Horvath, Ildiko; de Jongh, Frans H. C.; Joos, Guy; Kaminsky, David A.; Laube, Beth L.; Leuppi, Joerg D.; Sterk, Peter J.

    2017-01-01

    This international task force report updates general considerations for bronchial challenge testing and the performance of the methacholine challenge test. There are notable changes from prior recommendations in order to accommodate newer delivery devices. Rather than basing the test result upon a

  13. Standard Errors and Confidence Intervals of Norm Statistics for Educational and Psychological Tests.

    Science.gov (United States)

    Oosterhuis, Hannah E M; van der Ark, L Andries; Sijtsma, Klaas

    2016-11-14

    Norm statistics allow for the interpretation of scores on psychological and educational tests, by relating the test score of an individual test taker to the test scores of individuals belonging to the same gender, age, or education groups, et cetera. Given the uncertainty due to sampling error, one would expect researchers to report standard errors for norm statistics. In practice, standard errors are seldom reported; they are either unavailable or derived under strong distributional assumptions that may not be realistic for test scores. We derived standard errors for four norm statistics (standard deviation, percentile ranks, stanine boundaries and Z-scores) under the mild assumption that the test scores are multinomially distributed. A simulation study showed that the standard errors were unbiased and that corresponding Wald-based confidence intervals had good coverage. Finally, we discuss the possibilities for applying the standard errors in practical test use in education and psychology. The procedure is provided via the R function check.norms, which is available in the mokken package.

  14. Evaluation of standardized test methods to characterize fiber reinforced cement composites

    DEFF Research Database (Denmark)

    Paegle, Ieva; Fischer, Gregor

    2011-01-01

    This paper describes an investigation of standardized test methods to characterize fiber reinforced cementitious composites in terms of their behavior under flexural loading and its relation to their tensile stress-deformation response. Flexural testing and derivation of the tensile stress......-deformation response are preferred in standardized testing of Fiber Reinforced Cement Composites (FRCC) over the direct assessment of the tensile behavior because of the more convenient test setup and ease of specimen preparation. Four-point bending tests were carried out to evaluate the flexural response of FRCC...... and their results are compared to data obtained from direct tensile testing. The details of the formation of cracking are an important underlying assumption in the standardized evaluation procedures as well as in the established correlation models between flexural and tensile behavior. This detail has been...

  15. Sport specialization's association with an increased risk of developing anterior knee pain in adolescent female athletes.

    Science.gov (United States)

    Hall, Randon; Barber Foss, Kim; Hewett, Timothy E; Myer, Gregory D

    2015-02-01

    To determine if sport specialization increases the risk of anterior knee pain in adolescent female athletes. Retrospective cohort epidemiology study. Female basketball, soccer, and volleyball players (N = 546) were recruited from a single county public school district in Kentucky consisting of 5 middle schools and 4 high schools. A total of 357 multisport and 189 single-sport (66 basketball, 57 soccer, and 66 volleyball) athlete subjects were included due to their diagnosis of patellofemoral pain (PFP) on physical exam. Testing consisted of a standardized history and physician-administered physical examination to determine the presence of PFP. This study compared self-reported multisport athletes with sport-specialized athletes participating in only 1 sport. The sports-participation data were normalized by sport season, with each sport accounting for 1 season of exposure. Incidence rate ratios and 95% confidence intervals (CI) were calculated and used to determine significant differences between athletes who specialized in sport in early youth and multisport athletes. Specialization in a single sport increased the relative risk of PFP incidence 1.5-fold (95% CI 1.0-2.2, P = .038) for cumulative PFP diagnoses. Specific diagnoses such as Sinding Larsen Johansson/ patellar tendinopathy (95% CI 1.5-10.1, P = .005) and Osgood Schlatter disease (95% CI 1.5-10.1, P = .005) demonstrated a 4-fold greater relative risk in single-sport compared with multisport athletes. Incidence of other specific PFP diagnoses such as fat pad, plica, trauma, pes anserine bursitis, and iliotibial-band tendonitis was not different between single-sport and multisport participants (P > .05). Early sport specialization in female adolescents is associated with increased risk of anterior knee-pain disorders including PFP, Osgood Schlatter, Sinding Larsen-Johansson compared with multisport athletes.

  16. 78 FR 24289 - Aviation Rulemaking Advisory Committee (ARAC) Airman Testing Standards and Training Working Group...

    Science.gov (United States)

    2013-04-24

    ... personal information the commenter provides. Using the search function of the docket Web site, anyone can... Information; Industry-Led Changes to FAA Airman Testing Standards and Training (2) Draft PRIVATE PILOT...

  17. Standard Practice for Dosimetry of Proton Beams for use in Radiation Effects Testing of Electronics

    International Nuclear Information System (INIS)

    McMahan, Margaret A.; Blackmore, Ewart; Cascio, Ethan W.; Castaneda, Carlos; von Przewoski, Barbara; Eisen, Harvey

    2008-01-01

    Representatives of facilities that routinely deliver protons for radiation effect testing are collaborating to establish a set of standard best practices for proton dosimetry. These best practices will be submitted to the ASTM International for adoption

  18. Standard Practice for Dosimetry of Proton Beams for use in Radiation Effects Testing of Electronics

    Energy Technology Data Exchange (ETDEWEB)

    McMahan, Margaret A.; Blackmore, Ewart; Cascio, Ethan W.; Castaneda, Carlos; von Przewoski, Barbara; Eisen, Harvey

    2008-07-25

    Representatives of facilities that routinely deliver protons for radiation effect testing are collaborating to establish a set of standard best practices for proton dosimetry. These best practices will be submitted to the ASTM International for adoption.

  19. Epidemiological cut-off values for Flavobacterium psychrophilum MIC data generated by a standard test protocol

    DEFF Research Database (Denmark)

    Smith, P.; Endris, R.; Kronvall, G.

    2016-01-01

    Epidemiological cut-off values were developed for application to antibiotic susceptibility data for Flavobacterium psychrophilum generated by standard CLSI test protocols. The MIC values for ten antibiotic agents against Flavobacterium psychrophilum were determined in two laboratories. For five a...

  20. Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This test method provides a procedure for determining the ability of photovoltaic modules to withstand repeated immersion or splash exposure by seawater as might be encountered when installed in a marine environment, such as a floating aid-to-navigation. A combined environmental cycling exposure with modules repeatedly submerged in simulated saltwater at varying temperatures and under repetitive pressurization provides an accelerated basis for evaluation of aging effects of a marine environment on module materials and construction. 1.2 This test method defines photovoltaic module test specimens and requirements for positioning modules for test, references suitable methods for determining changes in electrical performance and characteristics, and specifies parameters which must be recorded and reported. 1.3 This test method does not establish pass or fail levels. The determination of acceptable or unacceptable results is beyond the scope of this test method. 1.4 The values stated in SI units are to be ...

  1. Standard test method for conducting drop-weight test to determine nil-ductility transition temperature of ferritic steels

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2006-01-01

    1.1 This test method covers the determination of the nil-ductility transition (NDT) temperature of ferritic steels, 5/8 in. (15.9 mm) and thicker. 1.2 This test method may be used whenever the inquiry, contract, order, or specification states that the steels are subject to fracture toughness requirements as determined by the drop-weight test. 1.3 The values stated in inch-pound units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  2. THE PHILOSOPHY OF EDUCATION AND SPORT

    Directory of Open Access Journals (Sweden)

    Jovo Radoš

    2006-06-01

    Full Text Available Sports education (training in physical education, development of physical skills and acquiring sports habits is, according to accepted international standards, considered an essential component of education. However, not only the experience we have, but contemporary tendencies in sport (different deviations and failure of established educational-moral principles as well confront us with the following question: Can sport still meet requirements in the process of education? The answer can be found among confronting philosophical- pedagogical views within the field of physical education, where special attention should be paid to universal value components of sport which, together with other examined values, make the general concept of humanity

  3. Facial Sports Injuries

    Science.gov (United States)

    ... Marketplace Find an ENT Doctor Near You Facial Sports Injuries Facial Sports Injuries Patient Health Information News ... should receive immediate medical attention. Prevention Of Facial Sports Injuries The best way to treat facial sports ...

  4. Comparison of Size Modulation Standard Automated Perimetry and Conventional Standard Automated Perimetry with a 10-2 Test Program in Glaucoma Patients.

    Science.gov (United States)

    Hirasawa, Kazunori; Takahashi, Natsumi; Satou, Tsukasa; Kasahara, Masayuki; Matsumura, Kazuhiro; Shoji, Nobuyuki

    2017-08-01

    This prospective observational study compared the performance of size modulation standard automated perimetry with the Octopus 600 10-2 test program, with stimulus size modulation during testing, based on stimulus intensity and conventional standard automated perimetry, with that of the Humphrey 10-2 test program in glaucoma patients. Eighty-seven eyes of 87 glaucoma patients underwent size modulation standard automated perimetry with Dynamic strategy and conventional standard automated perimetry using the SITA standard strategy. The main outcome measures were global indices, point-wise threshold, visual defect size and depth, reliability indices, and test duration; these were compared between size modulation standard automated perimetry and conventional standard automated perimetry. Global indices and point-wise threshold values between size modulation standard automated perimetry and conventional standard automated perimetry were moderately to strongly correlated (p 33.40, p modulation standard automated perimetry than with conventional standard automated perimetry, but the visual-field defect size was smaller (p modulation-standard automated perimetry than on conventional standard automated perimetry. The reliability indices, particularly the false-negative response, of size modulation standard automated perimetry were worse than those of conventional standard automated perimetry (p modulation standard automated perimetry than with conventional standard automated perimetry (p = 0.02). Global indices and the point-wise threshold value of the two testing modalities correlated well. However, the potential of a large stimulus presented at an area with a decreased sensitivity with size modulation standard automated perimetry could underestimate the actual threshold in the 10-2 test protocol, as compared with conventional standard automated perimetry.

  5. Administration of Standardized Competency Tests: Does the Testing Environment Make a Difference?

    Science.gov (United States)

    Wongbundhit, Yuwadee

    1996-01-01

    To relieve overcrowded, distracting, and uncomfortable testing conditions, the Dade County (Florida) Public Schools began administering the High School Competency Test on two successive Saturdays, instead of on school days. Classrooms were used, and students received free breakfasts and lunches. The new arrangement improved student performance and…

  6. Linear shrinkage test: justification for its reintroduction as a standard South African test method

    CSIR Research Space (South Africa)

    Sampson, LR

    2009-06-04

    Full Text Available Several problems with the linear shrinkage test specified in Method A4 of the THM 1 1979 were addressed as part of this investigation in an effort to improve the alleged poor reproducibility of the test and justify its reintroduction into THM 1. A...

  7. A standardization of the physical tests for external irradiation measuring detectors

    International Nuclear Information System (INIS)

    1977-05-01

    This report is the result of a standardization work, realized within the Radioprotection Services of the A.E.C., of the physical tests for dectors measuring external irradiations. Among the various tests mentionned, calibration and the establishment of the relative spectral response are treated in details. As far as calibration is concerned, the standardization refers to: the reference detector, the reference radiation source, the installation and calibration procedure. As for the relative spectral response the standardization refers to: the reference detector, the radiation sources to be used. High flux detectors and those for pulse electromagnetic radiations are also dealt with [fr

  8. Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1999-01-01

    1.1 This test method covers the determination of gel time of carbon fiber-epoxy tape and sheet. The test method is suitable for the measurement of gel time of resin systems having either high or low viscosity. 1.2 The values stated in SI units are to be regarded as standard. The values in parentheses are for reference only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  9. Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This test method covers the measurement of a steady heat flux to a given water-cooled surface by means of a system energy balance. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  10. Standard test method for uranium analysis in natural and waste water by X-ray fluorescence

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2004-01-01

    1.1 This test method applies for the determination of trace uranium content in waste water. It covers concentrations of U between 0.05 mg/L and 2 mg/L. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  11. Standard test method for laboratory evaluation of magnesium sacrificial anode test specimens for underground applications

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1997-01-01

    1.1 This test method covers a laboratory procedure that measures the two fundamental performance properties of magnesium sacrificial anode test specimens operating in a saturated calcium sulfate, saturated magnesium hydroxide environment. The two fundamental properties are electrode (oxidation potential) and ampere hours (Ah) obtained per unit mass of specimen consumed. Magnesium anodes installed underground are usually surrounded by a backfill material that typically consists of 75 % gypsum (CaSO4·2H2O), 20 % bentonite clay, and 5 % sodium sulfate (Na2SO4). The calcium sulfate, magnesium hydroxide test electrolyte simulates the long term environment around an anode installed in the gypsum-bentonite-sodium sulfate backfill. 1.2 This test method is intended to be used for quality assurance by anode manufacturers or anode users. However, long term field performance properties may not be identical to property measurements obtained using this laboratory test. Note 1—Refer to Terminology G 15 for terms used ...

  12. Drugs in sport

    National Research Council Canada - National Science Library

    Mottram, D. R. (David R.)

    2005-01-01

    ...-Doping Agency (WADA) Methods and advances in doping control, and the sanctions for testing positive The use of therapeutic drugs banned in sport Evaluation of the status of creatine as a legitimate nutritional supplement Ethical, political and administrative issues in monitoring drug use An assessment of the prevalence of drug taking in sp...

  13. Test Standard Developed for Determining the Slow Crack Growth of Advanced Ceramics at Ambient Temperature

    Science.gov (United States)

    Choi, Sung R.; Salem, Jonathan A.

    1998-01-01

    The service life of structural ceramic components is often limited by the process of slow crack growth. Therefore, it is important to develop an appropriate testing methodology for accurately determining the slow crack growth design parameters necessary for component life prediction. In addition, an appropriate test methodology can be used to determine the influences of component processing variables and composition on the slow crack growth and strength behavior of newly developed materials, thus allowing the component process to be tailored and optimized to specific needs. At the NASA Lewis Research Center, work to develop a standard test method to determine the slow crack growth parameters of advanced ceramics was initiated by the authors in early 1994 in the C 28 (Advanced Ceramics) committee of the American Society for Testing and Materials (ASTM). After about 2 years of required balloting, the draft written by the authors was approved and established as a new ASTM test standard: ASTM C 1368-97, Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature. Briefly, the test method uses constant stress-rate testing to determine strengths as a function of stress rate at ambient temperature. Strengths are measured in a routine manner at four or more stress rates by applying constant displacement or loading rates. The slow crack growth parameters required for design are then estimated from a relationship between strength and stress rate. This new standard will be published in the Annual Book of ASTM Standards, Vol. 15.01, in 1998. Currently, a companion draft ASTM standard for determination of the slow crack growth parameters of advanced ceramics at elevated temperatures is being prepared by the authors and will be presented to the committee by the middle of 1998. Consequently, Lewis will maintain an active leadership role in advanced ceramics standardization within ASTM

  14. Standardization Efforts for Mechanical Testing and Design of Advanced Ceramic Materials and Components

    Science.gov (United States)

    Salem, Jonathan A.; Jenkins, Michael G.

    2003-01-01

    Advanced aerospace systems occasionally require the use of very brittle materials such as sapphire and ultra-high temperature ceramics. Although great progress has been made in the development of methods and standards for machining, testing and design of component from these materials, additional development and dissemination of standard practices is needed. ASTM Committee C28 on Advanced Ceramics and ISO TC 206 have taken a lead role in the standardization of testing for ceramics, and recent efforts and needs in standards development by Committee C28 on Advanced Ceramics will be summarized. In some cases, the engineers, etc. involved are unaware of the latest developments, and traditional approaches applicable to other material systems are applied. Two examples of flight hardware failures that might have been prevented via education and standardization will be presented.

  15. Results of patch testing with a standard series of allergens at Manipal

    Directory of Open Access Journals (Sweden)

    Shenoi Shrutakirthi

    1994-01-01

    Full Text Available The study was designed to determine the common sensitizers in allergic contact dermatitis, to evolve a standard patch test tray for screening patients at our centre and to suggest allergens for multicentric trial in India. 212 patients (65 women, 147 men were patch tested with a standard series of allergens (23 allergens of European standard series extended with lanolin, cresol and gentamycin. The frequent sensitizers observed were gentamycin (14.2%, potassium dichromate (7.1%, colophony (6.6% and fragrance mix (6.1%. No positive reactions were observed for lanolin, quaternium - 15 and mercaptomix. Our standard tray will thus consist of all the allergens of European standard series except primin along with lanolin, cresol and gentamycin. Lanolin is included despite negativity as it was found to be the commonest sensitizer among topical medications in our previous study.

  16. ATHLETES’ KNOWLEDGE OF REDUCED SPORTS NUTRITION

    Directory of Open Access Journals (Sweden)

    Danilo Bojanić

    2015-05-01

    Full Text Available Decades of research support the theory that when there are sports competitions the¬re is also the question of what to eat and drink in order to enhance sports per¬for¬man¬ce. Optimal diet can reduce fatigue, and allow athletes who train longer and compete to recovering faster (Lin and Lee, 2005. Nutritional status has a direct impact on the level of physical effect. In other words, the physical condition of pre¬paration much depends on the nutritional status of persons engaged in sport (Beals and Manore, 1998. Methods: The sample was composed of 60 professional athletes from Montenegro (football, basketball and judo. Knowledge of reduced sports nu¬tri¬tion was tested by means of a standardized questionnaire. The questionnaire was designed to determine the knowledge of sports nutrition, the ingredients that are nece¬ssa¬ry in order to provide a sufficient amount of energy for training and compe¬tition, the dietary supplements, a meal prior to the competition as well as dehydration and re¬hy¬dration during training and competition. Results: According to the results as a who¬le, it can be concluded that the professional athletes’ knowledge of sports nutrition is at a satisfactory level. Out of 1200 responses 787 correct answers were achieved, or 65.5%. However, when looking at the individual responses then the satisfaction with the relative high percentage is not equal since we observed large gaps on very import¬ant issues related to sports nutrition. Discussion: By analyzing and comparing re¬se¬arch results (Matkovic, Prince & Cigrovski, 2006,in a sample of 56 basketball and ski¬ing coaches, 77.8% of correct answers were received. From a survey (Vasiljevic, Bo¬ja¬nic, Petkovic & Muratovic, 2014 of 30 licensed coaches from Mon¬tenegro (foot¬ball, handball, basketball, volleyball, athletics and tennis 78.,1% of correct answers were received. By looking into the results of our study, it is clear that the results indicate that

  17. The Introduction of Innovative Educational Technologies in the Personnel Training Process for Sport and Tourism Industries through the Application of Professional Standards

    Science.gov (United States)

    Zaitseva, Natalia A.; ?ndryushchenko, Lilia ?.

    2016-01-01

    The relevance of the research stems from the importance of modernization of the system of training for sport and tourism, without which the intensive development of this kind of professional activity is not possible. The aim of the study was the generalization of the experience of introduction of the innovative educational technologies in the…

  18. Perceived Impacts of Sport

    Directory of Open Access Journals (Sweden)

    IOANNIS DOUVIS

    2008-01-01

    Full Text Available It was the purpose of this preliminary project to measure how individuals perceive the impacts of sport in such areas as the economy, the environment, culture, community image and the quality of life, among other areas. The instrument was initially field tested in 1999 with a sample of 702 residents in the North eastern part of the United States. Their views suggest that they perceive sports to make a generally positive contribution to their communities and the local region. Some negative impacts were also identified, mostly of an environmental nature. However, the findings suggest that sports for the most part are perceived to play a major role in the lives of people and contribute in significant ways to the economy, and community pride.

  19. Standard test method for radiochemical determination of uranium isotopes in urine by alpha spectrometry

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 This test method is applicable to the determination of uranium in urine at levels of detection dependent on sample size, count time, detector background, and tracer yield. It is designed as a screening tool for detection of possible exposure of occupational workers. 1.2 This test method is designed for 50 mL of urine. This test method does not address the sampling protocol or sample preservation methods associated with its use. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  20. Chapter 9: options for summarizing medical test performance in the absence of a "gold standard".

    Science.gov (United States)

    Trikalinos, Thomas A; Balion, Cynthia M

    2012-06-01

    The classical paradigm for evaluating test performance compares the results of an index test with a reference test. When the reference test does not mirror the "truth" adequately well (e.g. is an "imperfect" reference standard), the typical ("naïve") estimates of sensitivity and specificity are biased. One has at least four options when performing a systematic review of test performance when the reference standard is "imperfect": (a) to forgo the classical paradigm and assess the index test's ability to predict patient relevant outcomes instead of test accuracy (i.e., treat the index test as a predictive instrument); (b) to assess whether the results of the two tests (index and reference) agree or disagree (i.e., treat them as two alternative measurement methods); (c) to calculate "naïve" estimates of the index test's sensitivity and specificity from each study included in the review and discuss in which direction they are biased; (d) mathematically adjust the "naïve" estimates of sensitivity and specificity of the index test to account for the imperfect reference standard. We discuss these options and illustrate some of them through examples.

  1. 78 FR 70349 - Proposed Revision of Policy for Incorporating New Test Standards Into the List of Appropriate...

    Science.gov (United States)

    2013-11-25

    ...) to the requirements in the replacement test standard. If OSHA's analysis shows the replacement test... standard to affected NRTLs' scopes of recognition. If OSHA's analysis shows the replacement test standard... equipment \\1\\ and materials for workplace safety purposes and to determine conformance with the test...

  2. 76 FR 26853 - Commercial Driver's License Testing and Commercial Learner's Permit Standards

    Science.gov (United States)

    2011-05-09

    ... Safety Administration 49 CFR Parts 383, 384 and 385 Commercial Driver's License Testing and Commercial... Administration 49 CFR Parts 383, 384, and 385 [Docket No. FMCSA-2007-27659] RIN 2126-AB02 Commercial Driver's License Testing and Commercial Learner's Permit Standards AGENCY: Federal Motor Carrier Safety...

  3. Evaluation of a draft standard on performance specifications for health physics instrumentation: results for environmental tests

    International Nuclear Information System (INIS)

    Kenoyer, J.L.; Swinth, K.L.; Mashburn, K.R.; Selby, J.M.

    1984-06-01

    Draft ANSI Standard N42.17 on performance specifications for health physics instrumentation is currently being evaluated by the Pacific Northwest Laboratory. Evaluation is performed by testing a cross-section of currently available instruments with testing procedures based on specifications of the standard and then determining the degree of conformance to the various elements of the proposed standard. Data will be presented on the performance of a cross-section of beta-gamma survey instruments under various environmental tests. Test results that will be presented include temperature effects, humidity effects, radio frequency (r.f.) susceptibility, ambient pressure effects, vibration effects, and shock effects. Tests performed to date show that most instruments will meet the temperature, humidity, and ambient pressure tests. A large variability is noted among instruments from the same or different vendors. Preliminary r.f. susceptibility tests have shown large artificial responses at some frequencies for specific instruments. The presentation will also include a discussion of procedures used in the testing and weaknesses identified in the proposed standard

  4. An Evaluation of Standardized Tests as Tools for the Measurement of Language Development.

    Science.gov (United States)

    Roberts, Elsa

    Four tests--PPVT, ITPA, MRT, WPPSI--commonly used to measure language development in young children are evaluated by four criteria: (1) what development aspects do they claim to tap; (2) what do they actually tap; (3) what linguistic knowledge is presupposed; (4) what special problems face a non-standard English speaker. These tests are considered…

  5. Toward the establishment of standardized in vitro tests for lipid-based formulations, part 4

    DEFF Research Database (Denmark)

    Williams, Hywel D; Sassene, Philip; Kleberg, Karen

    2014-01-01

    The Lipid Formulation Classification System Consortium looks to develop standardized in vitro tests and to generate much-needed performance criteria for lipid-based formulations (LBFs). This article highlights the value of performing a second, more stressful digestion test to identify LBFs near a...

  6. Consensus based reporting standards for diagnostic test accuracy studies for paratuberculosis in ruminants.

    NARCIS (Netherlands)

    Gardner, I.A.; Nielsen, S.S.; Whittington, R.J.; Collins, M.T.; Bakker, D.; Harris, B.; Sreevatsan, S.; Lombard, J.E.; Sweeney, R.; Smith, D.R.; Gavalchin, J.; Eda, S.

    2011-01-01

    The Standards for Reporting of Diagnostic Accuracy (STARD) statement (www.stard-statement.org) was developed to encourage complete and transparent reporting of key elements of test accuracy studies in human medicine. The statement was motivated by widespread evidence of bias in test accuracy studies

  7. Toward a Qualitative Analysis of Standardized Tests Using an Information Processing Model.

    Science.gov (United States)

    Armour-Thomas, Eleanor

    The use of standardized tests and test data to detect and address differences in cognitive styles is advocated here. To this end, the paper describes the componential theory of intelligence addressed by Sternberg et. al. This theory defines the components of intelligence by function and level of generality, including: (1) metacomponents: higher…

  8. Development of a Standard Test to Assess the Resistance of Staphylococcus aureus Biofilm Cells to Disinfectants

    NARCIS (Netherlands)

    Luppens, S.B.I.; Reij, M.W.; Heijden, van der R.W.; Rombouts, F.M.; Abee, T.

    2002-01-01

    A standardized disinfectant test for Staphylococcus aureus cells in biofilms was developed. Two disinfectants, the membrane-active compound benzalkonium chloride (BAC) and the oxidizing agent sodium hypochlorite, were used to evaluate the biofilm test. S. aureus formed biofilms on glass, stainless

  9. Developing a Strategy for Using Technology-Enhanced Items in Large-Scale Standardized Tests

    Science.gov (United States)

    Bryant, William

    2017-01-01

    As large-scale standardized tests move from paper-based to computer-based delivery, opportunities arise for test developers to make use of items beyond traditional selected and constructed response types. Technology-enhanced items (TEIs) have the potential to provide advantages over conventional items, including broadening construct measurement,…

  10. Comparing the Effects of Elementary Music and Visual Arts Lessons on Standardized Mathematics Test Scores

    Science.gov (United States)

    King, Molly Elizabeth

    2016-01-01

    The purpose of this quantitative, causal-comparative study was to compare the effect elementary music and visual arts lessons had on third through sixth grade standardized mathematics test scores. Inferential statistics were used to compare the differences between test scores of students who took in-school, elementary, music instruction during the…

  11. Using Modern Test Theory to Maintain Standards in Public Qualifications in England

    Science.gov (United States)

    Wheadon, Christopher

    2013-01-01

    This paper describes how item response theory (IRT) methods of test-equating could be applied to the maintenance of public examination standards in England. IRT methods of test-equating have been sparingly applied to the main public examinations in England, namely the General Certificate of Secondary Education (GCSE), the equivalent of a school…

  12. Pre-season adductor squeeze test and HAGOS function sport and recreation subscale scores predict groin injury in Gaelic football players.

    Science.gov (United States)

    Delahunt, Eamonn; Fitzpatrick, Helen; Blake, Catherine

    2017-01-01

    To determine if pre-season adductor squeeze test and HAGOS function, sport and recreation subscale scores can identify Gaelic football players at risk of developing groin injury. Prospective study. Senior inter-county Gaelic football team. Fifty-five male elite Gaelic football players (age = 24.0 ± 2.8 years, body mass = 84.48 ± 7.67 kg, height = 1.85 ± 0.06 m, BMI = 24.70 ± 1.77 kg/m 2 ) from a single senior inter-county Gaelic football team. Occurrence of groin injury during the season. Ten time-loss groin injuries were registered representing 13% of all injuries. The odds ratio for sustaining a groin injury if pre-season adductor squeeze test score was below 225 mmHg, was 7.78. The odds ratio for sustaining a groin injury if pre-season HAGOS function, sport and recreation subscale score was football players at risk of developing groin injury. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Standard test method for determination of surface lubrication on flexible webs

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1999-01-01

    1.1 This test method has been used since 1988 as an ANSI/ISO standard test for determination of lubrication on processed photographic films. Its purpose was to determine the presence of process-surviving lubricants on photographic films. It is the purpose of this test method to expand the applicability of this test method to other flexible webs that may need lubrication for suitable performance. This test measures the breakaway (static) coefficient of friction of a metal rider on the web by the inclined plane method. The objectives of the test is to determine if a web surface has a lubricant present or not. It is not intended to assign a friction coefficient to a material. It is not intended to rank lubricants. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish ...

  14. Error analysis for duct leakage tests in ASHRAE standard 152P

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, J.W.

    1997-06-01

    This report presents an analysis of random uncertainties in the two methods of testing for duct leakage in Standard 152P of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE). The test method is titled Standard Method of Test for Determining Steady-State and Seasonal Efficiency of Residential Thermal Distribution Systems. Equations have been derived for the uncertainties in duct leakage for given levels of uncertainty in the measured quantities used as inputs to the calculations. Tables of allowed errors in each of these independent variables, consistent with fixed criteria of overall allowed error, have been developed.

  15. A single standard for in-place testing of DOE HEPA filters - not

    Energy Technology Data Exchange (ETDEWEB)

    Mokler, B.V. [Los Alamos National Laboratory, NM (United States)

    1995-02-01

    This article is a review of arguments against the use of a single standard for in-place testing of DOE HEPA filters. The author feels that the term `standard` entails mandatory compliance. Additionally, the author feels that the variety of DOE HEPA systems requiring in-place testing is such that the guidance for testing must be written in a permissive fashion, allowing options and alternatives. With this in mind, it is not possible to write a single document entailing mandatory compliance for all DOE facilities.

  16. A single standard for in-place testing of DOE HEPA filters - not

    International Nuclear Information System (INIS)

    Mokler, B.V.

    1995-01-01

    This article is a review of arguments against the use of a single standard for in-place testing of DOE HEPA filters. The author feels that the term 'standard' entails mandatory compliance. Additionally, the author feels that the variety of DOE HEPA systems requiring in-place testing is such that the guidance for testing must be written in a permissive fashion, allowing options and alternatives. With this in mind, it is not possible to write a single document entailing mandatory compliance for all DOE facilities

  17. A Multi-Year Plan for Research, Development, and Prototype Testing of Standard Modular Hydropower Technology

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Brennan T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Welch, Tim [U.S. Department of Energy (DOE), Washington, DC (United States).Office of Energy Efficiency and Renewable Energy (EERE); Witt, Adam M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Stewart, Kevin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lee, Kyutae [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); DeNeale, Scott T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bevelhimer, Mark S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Burress, Timothy A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pracheil, Brenda M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pries, Jason L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); O' Connor, Patrick W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Curd, Shelaine L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ekici, Kivanc [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Papanicolaou, Thanos [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Tsakiris, Achilleas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Kutz, Benjamin [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Bishop, Norm [Knight Piesold, Denver, CO (United States); McKeown, Alisha [McKeown and Associates, Moberly, MO (United States); Rabon, Daniel [U.S. Department of Energy (DOE), Washington, DC (United States).Office of Energy Efficiency and Renewable Energy (EERE); Zimmerman, Gregory P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Uria Martinez, Rocio [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); McManamay, Ryan A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-02-01

    The Multi-Year Plan for Research, Development, and Prototype Testing of Standard Modular Hydropower Technology (MYRP) presents a strategy for specifying, designing, testing, and demonstrating the efficacy of standard modular hydropower (SMH) as an environmentally compatible and cost-optimized renewable electricity generation technology. The MYRP provides the context, background, and vision for testing the SMH hypothesis: if standardization, modularity, and preservation of stream functionality become essential and fully realized features of hydropower technology, project design, and regulatory processes, they will enable previously unrealized levels of new project development with increased acceptance, reduced costs, increased predictability of outcomes, and increased value to stakeholders. To achieve success in this effort, the MYRP outlines a framework of stakeholder-validated criteria, models, design tools, testing facilities, and assessment protocols that will facilitate the development of next-generation hydropower technologies.

  18. Development of a standardized battery of performance tests for the assessment of noise stress effects

    Science.gov (United States)

    Theologus, G. C.; Wheaton, G. R.; Mirabella, A.; Brahlek, R. E.

    1973-01-01

    A set of 36 relatively independent categories of human performance were identified. These categories encompass human performance in the cognitive, perceptual, and psychomotor areas, and include diagnostic measures and sensitive performance metrics. Then a prototype standardized test battery was constructed, and research was conducted to obtain information on the sensitivity of the tests to stress, the sensitivity of selected categories of performance degradation, the time course of stress effects on each of the selected tests, and the learning curves associated with each test. A research project utilizing a three factor partially repeated analysis of covariance design was conducted in which 60 male subjects were exposed to variations in noise level and quality during performance testing. Effects of randomly intermittent noise on performance of the reaction time tests were observed, but most of the other performance tests showed consistent stability. The results of 14 analyses of covariance of the data taken from the performance of the 60 subjects on the prototype standardized test battery provided information which will enable the final development and test of a standardized test battery and the associated development of differential sensitivity metrics and diagnostic classificatory system.

  19. Harmonization of standards for parabolic trough collector testing in solar thermal power plants

    Science.gov (United States)

    Sallaberry, Fabienne; Valenzuela, Loreto; Palacin, Luis G.; Leon, Javier; Fischer, Stephan; Bohren, Andreas

    2017-06-01

    The technology of parabolic trough collectors (PTC) is used widely in concentrating Solar Power (CSP) plants worldwide. However this type of large-size collectors cannot be officially tested by an accredited laboratory and certified by an accredited certification body so far, as there is no standard adapted to its particularity, and the current published standard for solar thermal collectors are not completely applicable to them. Recently some standardization committees have been working on this technology. This paper aims to give a summary of the standardized testing methodology of large-size PTC for CSP plants, giving the physical model chosen for modeling the thermal performance of the collector in the new revision of standard ISO 9806 and the points still to be improved in the standard draft IEC 62862-3-2. In this paper, a summary of the testing validation performed on one parabolic trough collector installed in one of the test facilities at the Plataforma Solar de Almería (PSA) with this new model is also presented.

  20. Electromagnetic compatibility (EMC) standard test chamber upgrade requirements for spacecraft design verification tests

    Science.gov (United States)

    Dyer, Edward F.

    1992-01-01

    In view of the serious performance deficiencies inherent in conventional modular and welded shielding EMC test enclosures, in which multipath reflections and resonant standing waves can damage flight hardware during RF susceptibility tests, NASA-Goddard has undertaken the modification of a 20 x 24 ft modular-shielded enclosure through installation of steel panels to which ferrite tiles will be mounted with epoxy. The internally reflected RF energy will thereby be absorbed, and exterior power-line noise will be reduced. Isolation of power-line filters and control of 60-Hz ground connections will also be undertaken in the course of upgrading.

  1. Sports Marketing.

    Science.gov (United States)

    Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

    This document presents the Ohio Integrated Technical and Academic Competency profile for sports marketing. The profile is to serve as the basis for curriculum development in Ohio's secondary, adult, and postsecondary programs. The profile includes a comprehensive listing of 999 specialty key indicators for evaluating mastery of 113 competencies in…

  2. Racquet Sports.

    Science.gov (United States)

    Zebas, Carole J., Ed.; Groppel, Jack L., Ed.

    1983-01-01

    In six articles on racquet sports, the origins of the games are traced, methods for teaching skills such as footwork, racquetball strategy, and badminton techniques are discussed, and the biomechanics of the one- and two-handed backhand in tennis are reviewed. Information about paddle tennis is included. (PP)

  3. Sports Ballistics

    Science.gov (United States)

    Clanet, Christophe

    2015-01-01

    This review describes and classifies the trajectories of sports projectiles that have spherical symmetry, cylindrical symmetry, or (almost) no symmetry. This classification allows us to discuss the large diversity observed in the paths of spherical balls, the flip properties of shuttlecocks, and the optimal position and stability of ski jumpers.

  4. Interfacing Sport

    DEFF Research Database (Denmark)

    Andersen, Tem Frank

    This study tries to map out the possible interplay between interactive digital media (including mobile and wearable technologies) and sport as performance and participation. The ambition is to create a model providing the analytical framework for understanding questions like "are we running...

  5. Sports Fitness

    Science.gov (United States)

    ... motivator. Physically, you need strength and endurance. Your training will vary with your sport. You would not train the same way for pole vaulting as for swimming. You might, however, cross train. Cross training simply means that you include a variety of ...

  6. GENETIC ASPECTS OF SPORTS PERFORMANCE

    Directory of Open Access Journals (Sweden)

    Fatma Ebru KOKU

    2015-03-01

    Full Text Available As participation in both amateur and professional sports increases, so does the importance of sports performance and the factors influencing it. Determinants of success in sports can be classified as training, genetic, epigenetic, dietary, motivational, equipment and other environmental factors. The effect of genetics on sports performance and skill has been examined for many years. Autosomal genes, mitochondrial DNA and various genes located in the Y chromosome have all been associated with sports performance. It is not possible to link physical performance to a single genetic polymorphism. Genes that have been most extensively studied in their relation to performance include ACE, ACTN3, ADRA2A, ADRB2, PPARA, PPARGC1A, AMPD1, HIF1A, NOS3, BDKRB2, VEGFR2 and VEGFA. For the time being, genetic screening tests may be useful in determining the weaknesses and strengths of a sportsperson, but not in predicting athletic success.

  7. Contribution of thermal–hydraulic validation tests to the standard design approval of SMART

    Directory of Open Access Journals (Sweden)

    Hyun-Sik Park

    2017-10-01

    Full Text Available Many thermal–hydraulic tests have been conducted at the Korea Atomic Energy Research Institute for verification of the SMART (System-integrated Modular Advanced ReacTor design, the standard design approval of which was issued by the Korean regulatory body. In this paper, the contributions of these tests to the standard design approval of SMART are discussed. First, an integral effect test facility named VISTA-ITL (Experimental Verification by Integral Simulation of Transients and Accidents-Integral Test Loop has been utilized to assess the TASS/SMR-S (Transient and Set-point Simulation/Small and Medium safety analysis code and confirm its conservatism, to support standard design approval, and to construct a database for the SMART design optimization. In addition, many separate effect tests have been performed. The reactor internal flow test has been conducted using the SCOP (SMART COre flow distribution and Pressure drop test facility to evaluate the reactor internal flow and pressure distributions. An ECC (Emergency Core Coolant performance test has been carried out using the SWAT (SMART ECC Water Asymmetric Two-phase choking test facility to evaluate the safety injection performance and to validate the thermal–hydraulic model used in the safety analysis code. The Freon CHF (Critical Heat Flux test has been performed using the FTHEL (Freon Thermal Hydraulic Experimental Loop facility to construct a database from the 5 × 5 rod bundle Freon CHF tests and to evaluate the DNBR (Departure from Nucleate Boiling Ratio model in the safety analysis and core design codes. These test results were used for standard design approval of SMART to verify its design bases, design tools, and analysis methodology.

  8. Introducing Vouchers and Standardized Tests for Higher Education in Russia: Expectations and Measurements

    OpenAIRE

    Osipian, Ararat

    2008-01-01

    The reform of higher education in Russia, based on standardized tests and educational vouchers, was intended to reduce inequalities in access to higher education. The initiative with the vouchers has failed and by now is already forgotten while the national test is planned to be introduced nationwide in 2009. The national test called to replace the present corrupt system of entry examinations has experienced numerous problems so far and will likely have even more problems in the future. This ...

  9. Standard Test Method for Hot Spot Protection Testing of Photovoltaic Modules

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This test method provides a procedure to determine the ability of a photovoltaic (PV) module to endure the long-term effects of periodic “hot spot” heating associated with common fault conditions such as severely cracked or mismatched cells, single-point open circuit failures (for example, interconnect failures), partial (or non-uniform) shadowing or soiling. Such effects typically include solder melting or deterioration of the encapsulation, but in severe cases could progress to combustion of the PV module and surrounding materials. 1.2 There are two ways that cells can cause a hot spot problem; either by having a high resistance so that there is a large resistance in the circuit, or by having a low resistance area (shunt) such that there is a high-current flow in a localized region. This test method selects cells of both types to be stressed. 1.3 This test method does not establish pass or fail levels. The determination of acceptable or unacceptable results is beyond the scope of this test method....

  10. College of American Pathologists' laboratory standards for next-generation sequencing clinical tests.

    Science.gov (United States)

    Aziz, Nazneen; Zhao, Qin; Bry, Lynn; Driscoll, Denise K; Funke, Birgit; Gibson, Jane S; Grody, Wayne W; Hegde, Madhuri R; Hoeltge, Gerald A; Leonard, Debra G B; Merker, Jason D; Nagarajan, Rakesh; Palicki, Linda A; Robetorye, Ryan S; Schrijver, Iris; Weck, Karen E; Voelkerding, Karl V

    2015-04-01

    The higher throughput and lower per-base cost of next-generation sequencing (NGS) as compared to Sanger sequencing has led to its rapid adoption in clinical testing. The number of laboratories offering NGS-based tests has also grown considerably in the past few years, despite the fact that specific Clinical Laboratory Improvement Amendments of 1988/College of American Pathologists (CAP) laboratory standards had not yet been developed to regulate this technology. To develop a checklist for clinical testing using NGS technology that sets standards for the analytic wet bench process and for bioinformatics or "dry bench" analyses. As NGS-based clinical tests are new to diagnostic testing and are of much greater complexity than traditional Sanger sequencing-based tests, there is an urgent need to develop new regulatory standards for laboratories offering these tests. To develop the necessary regulatory framework for NGS and to facilitate appropriate adoption of this technology for clinical testing, CAP formed a committee in 2011, the NGS Work Group, to deliberate upon the contents to be included in the checklist. Results . -A total of 18 laboratory accreditation checklist requirements for the analytic wet bench process and bioinformatics analysis processes have been included within CAP's molecular pathology checklist (MOL). This report describes the important issues considered by the CAP committee during the development of the new checklist requirements, which address documentation, validation, quality assurance, confirmatory testing, exception logs, monitoring of upgrades, variant interpretation and reporting, incidental findings, data storage, version traceability, and data transfer confidentiality.

  11. IPHE Regulations Codes and Standards Working Group - Type IV COPV Round Robin Testing

    Science.gov (United States)

    Maes, M.; Starritt, L.; Zheng, J. Y.; Ou, K.; Keller, J.

    2017-01-01

    This manuscript presents the results of a multi-lateral international activity intended to understand how to execute a cycle stress test as specified in a chosen standard (GTR, SAE, ISO, EIHP...). The purpose of this work was to establish a harmonized test method protocol to ensure that the same results would be achieved regardless of the testing facility. It was found that accurate temperature measurement of the working fluid is necessary to ensure the test conditions remain within the tolerances specified. Continuous operation is possible with adequate cooling of the working fluid but this becomes more demanding if the cycle frequency increases. Recommendations for future test system design and operation are presented.

  12. Development of test practice requirements for a standard method on fracture toughness testing in the transition range

    International Nuclear Information System (INIS)

    McCabe, D.E.; Zerbst, U.; Heerens, J.

    1993-01-01

    This report covers the resolution of several issues that are relevant to the ductile to brittle transition range of structural steels. One of this issues was to compare a statistical-based weakest-link method to constraint data adjustment methods for modeling the specimen size effects on fracture toughness. Another was to explore the concept of a universal transition temperature curve shape (Master Curve). Data from a Materials Properties Council round robin activity were used to test the proposals empirically. The findings of this study are inclosed in an activity for the development of a draft standard test procedure ''Test Practice for Fracture Toughness in the Transition Range''. (orig.) [de

  13. Tests of local Lorentz invariance violation of gravity in the standard model extension with pulsars.

    Science.gov (United States)

    Shao, Lijing

    2014-03-21

    The standard model extension is an effective field theory introducing all possible Lorentz-violating (LV) operators to the standard model and general relativity (GR). In the pure-gravity sector of minimal standard model extension, nine coefficients describe dominant observable deviations from GR. We systematically implemented 27 tests from 13 pulsar systems to tightly constrain eight linear combinations of these coefficients with extensive Monte Carlo simulations. It constitutes the first detailed and systematic test of the pure-gravity sector of minimal standard model extension with the state-of-the-art pulsar observations. No deviation from GR was detected. The limits of LV coefficients are expressed in the canonical Sun-centered celestial-equatorial frame for the convenience of further studies. They are all improved by significant factors of tens to hundreds with existing ones. As a consequence, Einstein's equivalence principle is verified substantially further by pulsar experiments in terms of local Lorentz invariance in gravity.

  14. Standard test method for measurement of oxidation-reduction potential (ORP) of soil

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method covers a procedure and related test equipment for measuring oxidation-reduction potential (ORP) of soil samples removed from the ground. 1.2 The procedure in Section 9 is appropriate for field and laboratory measurements. 1.3 Accurate measurement of oxidation-reduction potential aids in the analysis of soil corrosivity and its impact on buried metallic structure corrosion rates. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  15. Standard test method for abrasiveness of ink-impregnated fabric printer ribbons and other web materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This test method covers the determination of the abrasiveness of ink-impregnated fabric printer ribbons and other web materials by means of a sliding wear test. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  16. Standard test method for measurement of web/roller friction characteristics

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2003-01-01

    1.1 This test method covers the simulation of a roller/web transport tribosystem and the measurement of the static and kinetic coefficient of friction of the web/roller couple when sliding occurs between the two. The objective of this test method is to provide users with web/roller friction information that can be used for process control, design calculations, and for any other function where web/roller friction needs to be known. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  17. Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This test method covers the determination of nonvolatile residue (NVR) fallout in environmentally controlled areas used for the assembly, testing, and processing of spacecraft. 1.2 The NVR of interest is that which is deposited on sampling plate surfaces at room temperature: it is left to the user to infer the relationship between the NVR found on the sampling plate surface and that found on any other surfaces. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

  18. Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2006-01-01

    1.1 This test method covers the determination of solvent extractable nonvolatile residue (NVR) from wipers used in assembly, cleaning, or testing of spacecraft, but not from those used for analytical surface sampling of hardware. 1.2 The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.3 The NVR of interest is that which can be extracted from cleanroom wipers using a specified solvent that has been selected for its extractive qualities. Alternative solvents may be selected, but since their use may result in different values being generated, they must be identified in the procedure data sheet. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  19. Standard test method for plastic strain ratio r for sheet metal

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2000-01-01

    1.1 This test method covers special tension testing for the measurement of the plastic strain ratio, r, of sheet metal intended for deep-drawing applications. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  20. Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2002-01-01

    1.1 This test method covers the determination of the ability of glazed ceramic wall tile, ceramic mosaic tile, quarry tile, and pavers to be bonded to portland cement paste. This test method includes both face-mounted and back-mounted tile. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  1. Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This test method describes the measurement of heat transfer rate using a thermal capacitance-type calorimeter which assumes one-dimensional heat conduction into a cylindrical piece of material (slug) with known physical properties. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. Note 1—For information see Test Methods E 285, E 422, E 458, E 459, and E 511.

  2. Measurement of Perceived Parental Success Standards in Sport and Relations with Athletes’ Self-Esteem, Performance Anxiety, and Achievement Goal Orientation: Comparing Parental and Coach Influences

    Directory of Open Access Journals (Sweden)

    Frank J. Schwebel

    2016-01-01

    Full Text Available The Perceived Parent Success Standards Scale (PPSSS, adapted from the Perception of Success Questionnaire constructed by Roberts et al. (1998 to measure athletes’ achievement goal orientation, provides a measure of athletes’ perceptions of mastery- and ego-oriented parental success criteria, a central component of parental motivational climate. This study focused on 543 young athletes (ages 9–16 on 82 teams in recreational basketball leagues. The PPSSS exhibited strong factorial validity, construct validity, and orthogonality between ego and mastery factors that allow for different combinations of these factors to be tested. We also compared the impact of the motivational climates created by coaches and success standards conveyed by parents on postseason athlete outcome measures of anxiety, self-esteem, and achievement goal orientation. Correlational and multilevel regression analyses revealed that both coach and parent variables were significantly related to the athlete variables. However, mediational analyses indicated that parental success standards mediated relations between coach-initiated climate and all of the outcome variables, reflecting the power of parental socialization processes. We discuss potential reasons for the greater parental influence shown in this and a previous study, and we suggest directions for further research as well as possible interventions that can help both coaches and parents create a more positive athletic environment for young athletes.

  3. Test of "Light" cigarette counter-advertising using a standard test of advertising effectiveness

    OpenAIRE

    Shiffman, S.; Burton, S.; Pillitteri, J.; Gitchell, J.; Di, M; Sweeney, C.; Wardle, P.; Koehler, G.

    2001-01-01

    OBJECTIVE—To evaluate systematically the effectiveness of six advertising strategies (two message strategies presented in three different contexts) designed to promote smoking cessation by addressing smokers' misperceptions about Light cigarettes.
DESIGN—Smokers viewed one of six, 30 second test television concept advertisements, which varied by message (one emphasising how the sensory effects of Lights can be deceptive, the other describing the effects of vent blocking) and by ad context (no...

  4. Beyond the Caster Semenya controversy: the case of the use of genetics for gender testing in sport.

    Science.gov (United States)

    Wonkam, Ambroise; Fieggen, Karen; Ramesar, Raj

    2010-12-01

    Caster Semenya won the eight-hundred-meter title in the Berlin World Athletics Championships in 2009. Few hours after, Caster was at the center of a harsh contestation on gender. The International Association of Athletics Federations started an investigation, which was not respectful of her privacy. Caster's case highlights the need for an improvement in the awareness of genetic counseling principles amongst professionals, the public and various stakeholders. We critically examine the historical steps of gender verification in the Olympics, the violation of genetic counseling principles in Caster's case and outline some reflections on the complexity of the genetics of Disorders of sex development (DSD). Variability in both genotypes and phenotypes in DSD may not allow any etiological or functional classification at this point in time that could permit uncontroversial gender verification for fairer sport participation. We strongly suggest revisiting the pertinence of gender verification, and the process whereby this is done.

  5. Consensus-based reporting standards for diagnostic test accuracy studies for paratuberculosis in ruminants

    DEFF Research Database (Denmark)

    Gardner, Ian A.; Nielsen, Søren Saxmose; Whittington, Richard

    2011-01-01

    The Standards for Reporting of Diagnostic Accuracy (STARD) statement (www.stard-statement.org) was developed to encourage complete and transparent reporting of key elements of test accuracy studies in human medicine. The statement was motivated by widespread evidence of bias in test accuracy...... studies and the finding that incomplete or absent reporting of items in the STARD checklist was associated with overly optimistic estimates of test performance characteristics. Although STARD principles apply broadly, specific guidelines do not exist to account for unique considerations in livestock...... studies such as herd tests, potential use of experimental challenge studies, a more diverse group of testing purposes and sampling designs, and the widespread lack of an ante-mortem reference standard with high sensitivity and specificity. The objective of the present study was to develop a modified...

  6. Standardization of shape memory alloy test methods toward certification of aerospace applications

    Science.gov (United States)

    Hartl, D. J.; Mabe, J. H.; Benafan, O.; Coda, A.; Conduit, B.; Padan, R.; Van Doren, B.

    2015-08-01

    The response of shape memory alloy (SMA) components employed as actuators has enabled a number of adaptable aero-structural solutions. However, there are currently no industry or government-accepted standardized test methods for SMA materials when used as actuators and their transition to commercialization and production has been hindered. This brief fast track communication introduces to the community a recently initiated collaborative and pre-competitive SMA specification and standardization effort that is expected to deliver the first ever regulatory agency-accepted material specification and test standards for SMA as employed as actuators for commercial and military aviation applications. In the first phase of this effort, described herein, the team is working to review past efforts and deliver a set of agreed-upon properties to be included in future material certification specifications as well as the associated experiments needed to obtain them in a consistent manner. Essential for the success of this project is the participation and input from a number of organizations and individuals, including engineers and designers working in materials and processing development, application design, SMA component fabrication, and testing at the material, component, and system level. Going forward, strong consensus among this diverse body of participants and the SMA research community at large is needed to advance standardization concepts for universal adoption by the greater aerospace community and especially regulatory bodies. It is expected that the development and release of public standards will be done in collaboration with an established standards development organization.

  7. Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1999-01-01

    1.1 This test method covers the determination of the amount of resin flow that will take place from prepreg tape or sheet under given conditions of temperature and pressure. 1.2 The values stated in SI units are to be regarded as standard. The values in parentheses are for reference only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  8. Evaluation of the performance test uncertainties of a primary standard for low energy X-ray

    International Nuclear Information System (INIS)

    Cardoso, Ricardo de Souza; Peixoto, Jose Guilherme P.

    2005-01-01

    The present work was developed with the aim to check the reliability of the free-air ionization chamber with variable volume, manufactured by Victoreen Instruments, model 481 as a primary standard, used by Laboratorio Nacional de Metrologia das Radiacoes Ionizantes - LNMRI of IRD in order to measure the quantity ar kerma. To that were evaluates the uncertainties in each test done with the equipment during the process of its characterization as a standard. The results has a behaviour characteristics of a primary standard, being simple to handle, mechanical construction and showing an expanded uncertainty equal to 0,26%, which, corresponds to a 30 kV quality. (author)

  9. Standard test method for measurement of soil resistivity using the two-electrode soil box method

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This test method covers the equipment and a procedure for the measurement of soil resistivity, for samples removed from the ground, for use in the control of corrosion of buried structures. 1.2 Procedures allow for this test method to be used n the field or in the laboratory. 1.3 The test method procedures are for the resistivity measurement of soil samples in the saturated condition and in the as-received condition. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Soil resistivity values are reported in ohm-centimeter. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  10. Self-determination in sport commitment.

    Science.gov (United States)

    Zahariadis, Panayotis; Tsorbatzoudis, Haralambos; Alexandris, Konstantinos

    2006-04-01

    The study tested utility of self-determination and sport commitment theories to understanding young athletes' sport commitment. 343 young athletes (M= 13.5 yr., SD= +/- 1.1) from soccer, basketball, volleyball, handball, and water polo teams volunteered to participate. All completed the Sport Motivation Scale and the Sport Commitment Questionnaire. Pearson correlations showed a strong relationship between commitment and intrinsic motivation scores. In contrast, extrinsic motivation scores were not significantly correlated to commitment, whereas amotivation scores showed a negative correlation to commitment. Path analysis resulted in strong positive association of intrinsic motivation and commitment. Amotivation had small negative relation to commitment. According to the model tested, social constraints and involvement opportunities were not significant contributors to sport commitment. An alternative model supported the mediating role of enjoyment to psychological commitment. The results showed that high self-determination is supportive of sport commitment, whereas low self-determination reduces sport commitment.

  11. Test of "Light" cigarette counter-advertising using a standard test of advertising effectiveness.

    Science.gov (United States)

    Shiffman, S; Burton, S L; Pillitteri, J L; Gitchell, J G; Di Marino, M E; Sweeney, C T; Wardle, P A; Koehler, G L

    2001-01-01

    To evaluate systematically the effectiveness of six advertising strategies (two message strategies presented in three different contexts) designed to promote smoking cessation by addressing smokers' misperceptions about Light cigarettes. Smokers viewed one of six, 30 second test television concept advertisements, which varied by message (one emphasising how the sensory effects of Lights can be deceptive, the other describing the effects of vent blocking) and by ad context (non-commercial public service announcement (PSA), promotion of unbranded nicotine replacement therapy (NRT), or promotion of branded NRT). The effectiveness of each advertisement was determined using a validated advertising testing system in which ads were viewed in the context of reviewing a pilot television programme. Response to ads is assessed through shifts in subject choices of products offered as prizes before and after viewing the test advertisements. Included among the possible prizes were cigarettes and various pharmacotherapies for smoking cessation. Daily smokers (n = 1890) of Regular (34%), Light (47%), and Ultra Light (19%) cigarettes recruited from eight US cities. The primary outcome of interest was the shift away from cigarettes as the selected prize following exposure to the test advertisements. Secondary outcomes of interest included movement away from Light cigarettes and movement towards assisted quitting products. Smokers who saw the advertisement emphasising the sensory characteristics of Light cigarettes were more likely than subjects who saw the advertisement emphasising the effect of vent blocking to move away from cigarettes (OR = 1.97, 95% confidence interval CI 1.25 to 3.09; chi(2)(1) = 8.69, p = 0.003). Similarly, subjects who saw the advertisement framed as a PSA, rather than as a promotion for either a branded or unbranded NRT product, were also somewhat more likely to move away from cigarettes (OR = 1.51, 95% CI 0.94 to 2.40; chi(2)(1) = 2.97, p = 0.085). The

  12. Termite-Susceptible Species of Wood for Inclusion as a Reference in Indonesian Standardized Laboratory Testing

    Directory of Open Access Journals (Sweden)

    Arinana

    2012-03-01

    Full Text Available Standardized laboratory testing of wood and wood-based products against subterranean termites in Indonesia (SNI 01.7207-2006 (SNI has no requirement for the inclusion of a comparative reference species of wood (reference control. This is considered a weakness of the Indonesian standard. Consequently, a study was undertaken to identify a suitable Indonesian species of community wood that could be used as a reference control. Four candidate species of community woods: Acacia mangium, Hevea brasiliensis, Paraserianthes falcataria and Pinus merkusii were selected for testing their susceptibility to feeding by Coptotermes formosanus. Two testing methods (SNI and the Japanese standard method JIS K 1571-2004 were used to compare the susceptibility of each species of wood. Included in the study was Cryptomeria japonica, the reference control specified in the Japanese standard. The results of the study indicated that P. merkusii is a suitable reference species of wood for inclusion in laboratory tests against subterranean termites, conducted in accordance with the Indonesian standard (SNI 01.7207-2006.

  13. MANAGING SPORTS EXPERIENCES IN THE CONTEXT OF TOURISM

    Directory of Open Access Journals (Sweden)

    Marko Peric

    2015-06-01

    Full Text Available Participation in sports activities combined with unique sports resources can provide people with extraordinary experiences. It is especially true for tourism where sports activities are an important content of stay. The aim of this paper is to analyse how sports experiences could be planned and managed for the tourism purposes from the aspect of sports facility managers. In addition, the interrelations within the four realms of an experience were analysed and supported by proposed management models and examples. Results of the analysis indicate that it is possible for a facility to provide a full spectrum of experiences but only if it meets the standards of professional sports. Recommendations suggested by the paper provide new insight on organising the sports offer in the destination, and can be used by sports facility managers in order to better serve sports and sports tourism needs

  14. The development and standardization of testing methods for genetically modified organisms and their derived products.

    Science.gov (United States)

    Zhang, Dabing; Guo, Jinchao

    2011-07-01

    As the worldwide commercialization of genetically modified organisms (GMOs) increases and consumers concern the safety of GMOs, many countries and regions are issuing labeling regulations on GMOs and their products. Analytical methods and their standardization for GM ingredients in foods and feed are essential for the implementation of labeling regulations. To date, the GMO testing methods are mainly based on the inserted DNA sequences and newly produced proteins in GMOs. This paper presents an overview of GMO testing methods as well as their standardization. © 2011 Institute of Botany, Chinese Academy of Sciences.

  15. Mechanical properties test and microstructure analysis of polyoxymethylene (POM) micro injection moulded standard parts

    DEFF Research Database (Denmark)

    Tosello, Guido; Lucchetta, Giovanni; Hansen, Hans Nørgaard

    2009-01-01

    The tensile mechanical properties and the micro structure of micro injection moulded polyoxymethylene (POM) test parts were investigated in this paper. The effects of different injection moulding processing conditions on ultimate tensile stress and strain at break were analyzed. Additionally......, the effects of miniaturization on the mechanical properties were investigated by executing injection moulding with both a standard tool designed according to ISO 527-2 and a miniaturized test part obtained from the standard design by a downscaling factor 10. The experiments have been performed according...

  16. Standard test method for plutonium assay by plutonium (III) diode array spectrophotometry

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2002-01-01

    1.1 This test method describes the determination of total plutonium as plutonium(III) in nitrate and chloride solutions. The technique is applicable to solutions of plutonium dioxide powders and pellets (Test Methods C 697), nuclear grade mixed oxides (Test Methods C 698), plutonium metal (Test Methods C 758), and plutonium nitrate solutions (Test Methods C 759). Solid samples are dissolved using the appropriate dissolution techniques described in Practice C 1168. The use of this technique for other plutonium-bearing materials has been reported (1-5), but final determination of applicability must be made by the user. The applicable concentration range for plutonium sample solutions is 10–200 g Pu/L. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropria...

  17. Usage of Latent Class Analysis in Diagnostic Microbiology in the Absence of Gold Standard Test

    Directory of Open Access Journals (Sweden)

    Gul Bayram Abiha

    2016-12-01

    Full Text Available The evaluation of performance of various tests diagnostic tests in the absence of gold standard is an important problem. Latent class analysis (LCA is a statistical analysis method known for many years, especially in the absence of a gold standard for evaluation of diagnostic tests so that LCA has found its wide application area. During the last decade, LCA method has widely used in for determining sensivity and specifity of different microbiological tests. It has investigated in the diagnosis of mycobacterium tuberculosis, mycobacterium bovis, human papilloma virus, bordetella pertussis, influenza viruses, hepatitis E virus (HEV, hepatitis C virus (HCV and other various viral infections. Researchers have compared several diagnostic tests for the diagnosis of different pathogens with LCA. We aimed to evaluate performance of latent class analysis method used microbiological diagnosis in various diseases in several researches. When we took into account all of these tests' results, we suppose that LCA is a good statistical analysis method to assess different test performances in the absence of gold standard. [Archives Medical Review Journal 2016; 25(4.000: 467-488

  18. US Department of Energy DOE Nevada Operations Office, Nevada Test Site: Underground safety and health standards

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The Nevada Test Site Underground Safety and Health Standards Working Group was formed at the direction of John D. Stewart, Director, Nevada Test Site Office in April, 1990. The objective of the Working Group was to compile a safety and health standard from the California Tunnel Safety Orders and OSHA for the underground operations at the NTS, (excluding Yucca Mountain). These standards are called the NTS U/G Safety and Health Standards. The Working Group submits these standards as a RECOMMENDATION to the Director, NTSO. Although the Working Group considers these standards to be the most integrated and comprehensive standards that could be developed for NTS Underground Operations, the intent is not to supersede or replace any relevant DOE orders. Rather the intent is to collate the multiple safety and health references contained in DOE Order 5480.4 that have applicability to NTS Underground Operations into a single safety and heath standard to be used in the underground operations at the NTS. Each portion of the standard was included only after careful consideration by the Working Group and is judged to be both effective and appropriate. The specific methods and rationale used by the Working Group are outlined as follows: The letter from DOE/HQ, dated September 28, 1990 cited OSHA and the CTSO as the safety and health codes applicable to underground operations at the NTS. These mandated codes were each originally developed to be comprehensive, i.e., all underground operations of a particular type (e.g., tunnels in the case of the CTSO) were intended to be adequately regulated by the appropriate code. However, this is not true; the Working Group found extensive and confusing overlap in the codes in numerous areas. Other subjects and activities were addressed by the various codes in cursory fashion or not at all.

  19. US Department of Energy DOE Nevada Operations Office, Nevada Test Site: Underground safety and health standards

    International Nuclear Information System (INIS)

    1993-05-01

    The Nevada Test Site Underground Safety and Health Standards Working Group was formed at the direction of John D. Stewart, Director, Nevada Test Site Office in April, 1990. The objective of the Working Group was to compile a safety and health standard from the California Tunnel Safety Orders and OSHA for the underground operations at the NTS, (excluding Yucca Mountain). These standards are called the NTS U/G Safety and Health Standards. The Working Group submits these standards as a RECOMMENDATION to the Director, NTSO. Although the Working Group considers these standards to be the most integrated and comprehensive standards that could be developed for NTS Underground Operations, the intent is not to supersede or replace any relevant DOE orders. Rather the intent is to collate the multiple safety and health references contained in DOE Order 5480.4 that have applicability to NTS Underground Operations into a single safety and heath standard to be used in the underground operations at the NTS. Each portion of the standard was included only after careful consideration by the Working Group and is judged to be both effective and appropriate. The specific methods and rationale used by the Working Group are outlined as follows: The letter from DOE/HQ, dated September 28, 1990 cited OSHA and the CTSO as the safety and health codes applicable to underground operations at the NTS. These mandated codes were each originally developed to be comprehensive, i.e., all underground operations of a particular type (e.g., tunnels in the case of the CTSO) were intended to be adequately regulated by the appropriate code. However, this is not true; the Working Group found extensive and confusing overlap in the codes in numerous areas. Other subjects and activities were addressed by the various codes in cursory fashion or not at all

  20. Nuclear reactor pressure vessel surveillance capsule examinations. Application of American Society for Testing and Materials Standards

    International Nuclear Information System (INIS)

    Perrin, J.S.

    1978-01-01

    A series of pressure vessel surveillance capsules is installed in each commercial nuclear power plant in the United States. A capsule typically contains neutron dose meters, thermal monitors, tensile specimens, and Charpy V-notch impact specimens. In order to determine property changes of the pressure vessel resulting from irradiation, surveillance capsules are periodically removed during the life of a reactor and examined. There are numerous standards, regulations, and codes governing US pressure vessel surveillance capsule programmes. These are put out by the US Nuclear Regulatory Commission, the Boiler and Pressure Vessel Committee of the American Society of Mechanical Engineers, and the American Society for Testing and Materials (ASTM). A majority of the pertinent ASTM standards are under the jurisdiction of ASTM Committee E-10 on Nuclear Applications and Measurements of Radiation Effects. The standards, regulations, and codes pertaining to pressure vessel surveillance play an important role in ensuring reliability of the nuclear pressure vessels. ASTM E 185-73 is the Standard Recommended Practice for Surveillance Tests for Nuclear Reactors. This standard recommends procedures for both the irradiation and subsequent testing of surveillance capsules. ASTM E 185-73 references many additional specialized ASTM standards to be followed in specific areas of a surveillance capsule examination. A key element of surveillance capsule programmes is the Charpy V-notch impact test, used to define curves of fracture behaviour over a range of temperatures. The data from these tests are used to define the adjusted reference temperature used in determining pressure-temperature operating curves for a nuclear power plant. (author)

  1. Standard test method for calibration of surface/stress measuring devices

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1997-01-01

    Return to Contents page 1.1 This test method covers calibration or verification of calibration, or both, of surface-stress measuring devices used to measure stress in annealed and heat-strengthened or tempered glass using polariscopic or refractometry based principles. 1.2 This test method is nondestructive. 1.3 This test method uses transmitted light, and therefore, is applicable to light-transmitting glasses. 1.4 This test method is not applicable to chemically tempered glass. 1.5 Using the procedure described, surface stresses can be measured only on the “tin” side of float glass. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  2. International Sport Events: Improving Marketing

    Directory of Open Access Journals (Sweden)

    Margarita Kerzaitė

    2014-04-01

    Full Text Available The report and the article will be a comprehensive analysis ofthe needs to improve the international sport events marketing.Highlighting the role of international sport events in contemporarysociety and the challenges in the context of globalization,comparing opinions of various authors about aspects of classificationand the benefits for host country. The article and the reportreveals the main existing problem encountered in organizinginternational sport events, estimated perspectives for solutionof this problem. Summarizes the international sport eventsopportunities, basically modernize marketing tools according tothe marketing mix correction based on systematic synthesis ofmarketing concepts and adaptation/standardization needs, themost important factors in the marketing mix for the excretion ofthe main marketing objectives. The article is based on the latestscientific literature analysis.

  3. Standard review plan for the review and evaluation of emergency plans for research and test reactors

    International Nuclear Information System (INIS)

    1983-10-01

    This document provides a Standard Review Plan to assure that complete and uniform reviews are made of research and test reactor radiological emergency plans. The report is organized under ten planning standards which correspond to the guidance criteria in American National Standard ANSI/ANS 15.16 - 1982 as endorsed by Revision 1 to Regulatory Guide 2.6. The applicability of the items under each planning standard is indicated by subdivisions of the steady-state thermal power levels at which the reactors are licensed to operate. Standard emergency classes and example action levels for research and test reactors which should initiate these classes are given in an Appendix. The content of the emergency plan is as follows: the emergency plan addresses the necessary provisions for coping with radiological emergencies. Activation of the emergency plan is in response to the emergency action levels. In addition to addressing those severe emergencies that will fall within one of the standard emergency classes, the plan also discusses the necessary provisions to deal with radiological emergencies of lesser severity that can occur within the operations boundary. The emergency plan allows for emergency personnel to deviate from actions described in the plan for unusual or unanticipated conditions

  4. Standard test method for determining nodularity and nodule count in ductile iron using image analysis

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 This test method is used to determine the percent nodularity and the nodule count per unit area (that is, number of nodules per mm2) using a light microscopical image of graphite in nodular cast iron. Images generated by other devices, such as a scanning electron microscope, are not specifically addressed, but can be utilized if the system is calibrated in both x and y directions. 1.2 Measurement of secondary or temper carbon in other types of cast iron, for example, malleable cast iron or in graphitic tool steels, is not specifically included in this standard because of the different graphite shapes and sizes inherent to such grades 1.3 This standard deals only with the recommended test method and nothing in it should be construed as defining or establishing limits of acceptability or fitness for purpose of the material tested. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address al...

  5. SEU testing of a novel hardened register implemented using standard CMOS technology

    International Nuclear Information System (INIS)

    Monnier, T.; Roche, F.M.; Cosculluela, J.; Velazco, R.

    1999-01-01

    A novel memory structure, designed to tolerate SEU perturbations, has been implemented in registers and tested. The design was completed using a standard submicron nonradiation hardened CMOS technology. This paper presents the results of heavy ions tests which evidence the noticeable improvement of the SEU-robustness with an increased LET threshold and reduced cross-section, without significant impact to die real estate, write time, or power consumption

  6. Development and Standardization of a Test for Pragmatic Language Skills in Egyptian Arabic: The Egyptian Arabic Pragmatic Language Test (EAPLT).

    Science.gov (United States)

    Khodeir, Mona S; Hegazi, Mona A; Saleh, Marwa M

    2018-03-19

    The aim of this study was to standardize an Egyptian Arabic Pragmatic Language Test (EAPLT) using linguistically and socially suitable questions and pictures in order to be able to address specific deficits in this language domain. Questions and pictures were designed for the EAPLT to assess 3 pragmatic language subsets: pragmatic skills, functions, and factors. Ten expert phoniatricians were asked to review the EAPLT and complete a questionnaire to assess the validity of the test items. The EAPLT was applied in 120 typically developing Arabic-speaking Egyptian children (64 females and 56 males) randomly selected by inclusion and exclusion criteria in the age range between 2 years, 1 month, 1 day and 9 years, 12 months, 31 days. Children's scores were used to calculate the means and standard deviations and the 5th and 95th percentiles to determine the age of the pragmatic skills acquisition. All experts have mostly agreed that the EAPLT gives a general idea about children's pragmatic language development. Test-retest reliability analysis proved the high reliability and internal consistency of the EAPLT subsets. A statistically significant correlation was found between the test subsets and age. The EAPLT is a valid and reliable Egyptian Arabic test that can be applied in order to detect a pragmatic language delay. © 2018 S. Karger AG, Basel.

  7. Cytotoxicity Test of One-Step Self-Etching Bonding Agents by Standardized Dentin Barrier Test Using Polyurethane Discs

    Directory of Open Access Journals (Sweden)

    Mi-Joo Kim

    2013-12-01

    Full Text Available This study was performed to standardize a dentin barrier test with the substitute and evaluate the cytotoxicity of one-step self-etching bonding agents. Each of the natural bovine dentin and polyurethane discs were 500-μm thick and were tested using a perfusion device. Following the treatment with 0.05% phenol on the natural bovine disc or three kinds of polyurethane discs—30, 40, and 50 pcf (pounds per cubic foot—cell viability of L-929 was measured by the 3-(4,5-dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide (MTT assay and expressed as percentages of non-treated group, respectively. A substitute showing permeability similar to that of bovine dentin was determined based on this result. Cytotoxicity test of bonding agents was performed by the selected substitute, the results of which were expressed as percentages of the control. In addition, SEM images were taken after the tests. The cell viability by 40-pcf polyurethane disc was not statistically different from that by bovine dentin disc (P > 0.05. Futurabond DC resulted in the highest cell viability and Bond force the lowest by the 40-pcf polyurethane disc (P < 0.05. The adhesives on the 40-pcf polyurethane disc changed cellular morphology with different degrees on the SEM images. This standardized test might be useful for assessing the cytotoxicity of dental materials applied to dentin before clinical applications.

  8. Modern psychological science to sport

    Directory of Open Access Journals (Sweden)

    Artem I. Kovalev

    2015-06-01

    Full Text Available In April 2015 the 7th All-Russian Festival of Student Sport took place. It was established seven years ago by the decision of the Academician V.A. Sadovnichy, rector of Lomonosov Moscow State University. This year the sports festival has embraced more than two hundreds of higher education institutions of the Russian Federation. A variety of sporting events with the participation of undergraduate and graduate students, performances by famous athletes, delivery standards and other sport events allowed to attract both participants and spectators of all ages, professional sports facilities and the degree of preparedness. A distinctive feature of the Festival’2015 was the fact of timing the celebration of the 70th anniversary of Victory in the 1941-1945Great Patriotic War in Russia. As a result, the program of the festival in addition to traditional sports and competitive events also includes sports and patriotic elements, i.e. trips to places of military glory, lectures and discussion clubs devoted to the development of sport and athletes during the war. Another innovation this year was held in the framework of the festival of scientific-practical conference “Fundamental science – sport”. The interdisciplinary nature of the conference allowed to unite representatives of different areas of knowledge, e.g. psychologists, biologists, doctors, philosophers and educators. The wide coverage of the audience and the speakers allowed to hold the conference in the format of online video simultaneously with the Tomsk State University, St. Petersburg State University, Southern Federal University and Perm State Humanitarian Teacher-Training University. To emphasize the importance of both fundamental and practical research, the conference was divided into two parts: the plenary session which highlighted the important methodological issues of interaction between science and sport, and the youth section of the conference that included reports on the

  9. Writing lives in sport

    DEFF Research Database (Denmark)

    Christensen, Mette Krogh

    Writing lives in sport is a book of stories about sports-persons. The people concerned include sports stars, sports people who are not quite so famous, and relatively unknown physical education teachers and sports scientists.Writing lives in sport raises questions about writing biographies...... in the academis world of sport studies. It does not set out to be a methodological treatise but through the writing of lives in sports does raise questions of method. Each essay in this collection deals with problems of writing sports-people's lives. These essays could be said to fall along a spectrum from those...

  10. Standardization, Validity and Reliability Study of Gülhane Aphasia Test-2 (GAT-2

    Directory of Open Access Journals (Sweden)

    İlknur Maviş

    2007-04-01

    Full Text Available OBJECTIVE: Gülhane Aphasia Test-2 (GAT-2 has been developed to show the presence of a language disorder ‘aphasia’ and to give the clinician implications for the accompanying speech disorders such as apraxia and dysarthria. OBJECTIVE: The aim of the study was to report standardization, validity and reliability study of GAT-2. METHODS: : 10 healthy individuals were tested initially for the pilot study. 134 healthy individual was included to the standardization study and 30 individuals with aphasia and 11 individuals with right brain injury was included to the validation study. The inter group GAT-2 score differentiations and the effects of age, years of education, sex variances were observed. GAT-2 cut-off scores were calculated by the scores of healthy individuals. GAT-2 test-retest reliability and inter-observer reliability was calculated. RESULTS: Healthy individuals’ GAT-2 scores were significantly different from the GAT-2 scores of aphasic patients, but not from right brain injured patients’. Healthy individuals’ GAT-2 scores were not affected from the sex, age variances but from years of education, so cut-off scores were calculated by this variance. GAT-2 scores of aphasic patients were not affected from age, sex and years of education. Test-retest and inter-observer reliability and internal consistency results showed that GAT-2 is a highly reliable aphasia screening test. CONCLUSION: GAT-2 was found to be a standardized, highly reliable and a valid aphasia test for Turkish stroke patients with aphasia

  11. Standard test method for ranking resistance of materials to sliding wear using block-on-ring wear test

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This test method covers laboratory procedures for determining the resistance of materials to sliding wear. The test utilizes a block-on-ring friction and wear testing machine to rank pairs of materials according to their sliding wear characteristics under various conditions. 1.2 An important attribute of this test is that it is very flexible. Any material that can be fabricated into, or applied to, blocks and rings can be tested. Thus, the potential materials combinations are endless. However, the interlaboratory testing has been limited to metals. In addition, the test can be run with various lubricants, liquids, or gaseous atmospheres, as desired, to simulate service conditions. Rotational speed and load can also be varied to better correspond to service requirements. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Wear test results are reported as the volume loss in cubic millimetres for both the block and ring. Materials...

  12. Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2001-01-01

    1.1 This test method covers the determination of the relative amount of water absorption by various types of structural core materials when immersed or in a high relative humidity environment. This test method is intended to apply to only structural core materials; honeycomb, foam, and balsa wood. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given may be approximate. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  13. Standard guide for conducting wear tests using a rotary platform, double-head abraser

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This guide covers and is intended to assist in establishing procedures for conducting wear tests of rigid or flexible materials utilizing the rotary platform, double-head abraser (RPDH). 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.2.1 Exception—English units are used when determining coating thickness. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  14. Standard test method for measurement of corrosion potentials of Aluminum alloys

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1997-01-01

    1.1 This test method covers a procedure for measurement of the corrosion potential (see Note 1) of an aluminum alloy in an aqueous solution of sodium chloride with enough hydrogen peroxide added to provide an ample supply of cathodic reactant. Note 1—The corrosion potential is sometimes referred to as the open-circuit solution or rest potential. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  15. Overall migration test in food packaging: Evaluation of alternative internal standards

    Directory of Open Access Journals (Sweden)

    Edgar Andres Avendaño Florez

    2018-01-01

    Full Text Available In the global migration test for plastic packaging intended for fatty foods, glyceryl triheptadecanoate (GTM is used as the internal standard for the quantification of fatty acid methyl esters (FAMEs by gas chromatography. In this work, ethyl 3-phenyl propanoate (EFP and tetradecanoic acid (AM were evaluated as alternative internal standards. The use of (AM presented linear behavior (r > 0.99 and %Sb < 5%, good intermediate precision (HORRATr = 0.9, and accuracy (%R = 100.6%. In contrast, the evaluation of (EFP demonstrated that this is not an adequate internal standard for the quantification of FAMEs. In addition, it was statistically evaluated that there are no significant differences in the calculation of the global migration from FAMEs quantified using GTM or AM as internal standards, but the use of EFP presents significant differences.

  16. Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This test method covers the determination of the impact resistance of an aerospace transparent enclosure, hereinafter called windshield, during hailstorm conditions using simulated hailstones consisting of ice balls molded under tightly controlled conditions. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements see Section 7.

  17. Standard test method for plutonium by Iron (II)/Chromium (VI) amperometric titration

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2002-01-01

    1.1 This test method covers the determination of plutonium in unirradiated nuclear-grade plutonium dioxide, uranium-plutonium mixed oxides with uranium (U)/plutonium (Pu) ratios up to 21, plutonium metal, and plutonium nitrate solutions. Optimum quantities of plutonium to measure are 7 to 15 mg. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  18. Family – Sport – Upbringing [Rodzina – Sport – Wychowanie

    Directory of Open Access Journals (Sweden)

    Jan CZECHOWSKI

    2017-11-01

    Full Text Available Issues brought up in the literature of sport in the context of the upbringing carried out in families are particularly valuable and needed in the chaos of the contemporary world. Sought here are the answers to such questions as: in which aspect of the functioning of the contemporary family is it possible to address the issue of sport?; can sport become a specific ally in the upbringing and the effective intercommunication of individual family members?; in what way can sport be carried out in the family so that it becomes a part of the education process? Based on conducted examinations material was gathered in the form of data concerning issues of sport treated as one of tools used in bringing up the family. They used quality testing methods here: phenomenological, which most generally comes down to the honest description of the examined phenomenon and with hermeneutic method, thanks to the application of which it is possible to get to obtain tangible results into the meaning of collected contents. Also a method of the diagnostic survey was applied. Research groups for the study were: coaches and instructors, athletes, PE teachers, students of PE and Sport, academic teachers of sports colleges. The persons are examined as to their methods and programmes. They are also parents, devoting themselves largely to the upbringing and the care of their children.

  19. The effect of instructional methodology on high school students natural sciences standardized tests scores

    Science.gov (United States)

    Powell, P. E.

    Educators have recently come to consider inquiry based instruction as a more effective method of instruction than didactic instruction. Experience based learning theory suggests that student performance is linked to teaching method. However, research is limited on inquiry teaching and its effectiveness on preparing students to perform well on standardized tests. The purpose of the study to investigate whether one of these two teaching methodologies was more effective in increasing student performance on standardized science tests. The quasi experimental quantitative study was comprised of two stages. Stage 1 used a survey to identify teaching methods of a convenience sample of 57 teacher participants and determined level of inquiry used in instruction to place participants into instructional groups (the independent variable). Stage 2 used analysis of covariance (ANCOVA) to compare posttest scores on a standardized exam by teaching method. Additional analyses were conducted to examine the differences in science achievement by ethnicity, gender, and socioeconomic status by teaching methodology. Results demonstrated a statistically significant gain in test scores when taught using inquiry based instruction. Subpopulation analyses indicated all groups showed improved mean standardized test scores except African American students. The findings benefit teachers and students by presenting data supporting a method of content delivery that increases teacher efficacy and produces students with a greater cognition of science content that meets the school's mission and goals.

  20. Interpretive Issues with the Roberts Apperception Test for Children: Limitations of the Standardization Group.

    Science.gov (United States)

    Bell, Nancy L.; Nagle, Richard J.

    1999-01-01

    Investigates the validity of the Roberts Apperception Test for Children (RATC) by examining the appropriateness of the standardization norms with other nonclinical samples. Findings suggest that the children in this study form a separate and distinct group from the well-adjusted children upon which the RATC scales were normed and supports previous…