WorldWideScience

Sample records for spontaneous ignition tendency

  1. Spontaneous ignition due to intentional acute aluminum phosphide poisoning.

    Science.gov (United States)

    Shadnia, Shahin; Soltaninejad, Kambiz

    2011-02-01

    Acute aluminum phosphide (AlP) poisoning is one of the most common cause of acute pesticide poisoning in Iran. Spontaneous ignition is a rare finding in AlP poisoning. To present two cases of fatal AlP poisoning that involved spontaneous ignition. Two patients presented with suicidal ingestion of AlP tablets. In the Emergency Department (ED), they received gastric lavage. During insertion of a nasogastric tube, both patients experienced spontaneous ignition, and flames were witnessed by the medical personnel. Unfortunately, both patients died due to systemic effects of AlP poisoning. Patients who present with acute aluminum phosphide poisoning may experience spontaneous ignition in the ED. Copyright © 2011 Elsevier Inc. All rights reserved.

  2. Spontaneous ignition of biodiesel: A potential fire risk

    Directory of Open Access Journals (Sweden)

    Shibata Yasuhito

    2008-01-01

    Full Text Available The spontaneous ignition of biodiesel was for the first time suspected to be the cause of a recent fire in Japan. We herein present experimental evidence implying this potential risk of biodiesel. Thus, three independent biodiesel samples were subjected to a series of experiments, including a thermogravimetry-differential thermal analysis, a differential scanning calorimetry analysis and a modified wire basket test. The results were comparatively evaluated with reference to vegetable oils, of which spontaneous ignition has been well reported as a cause of fires. The heat onset temperature of biodiesel samples was determined to be ~100 °C, which was ~45 °C lower than those of vegetable oils. Furthermore, under the isothermal condition at 100 °C, the inner temperature of biodiesel samples rose rapidly with the generation of smoke after short induction periods owing to their exothermal decomposition, whereas for vegetable oils neither change in the inside temperature nor generation of smoke was observed even after 10 hours. It was therefore concluded that biodiesel possesses the higher risk of spontaneous ignition than vegetable oils. This is very important information to minimize the fire risk in biodiesel production facilities and so on. .

  3. Influence of anti-pyrogenic materials on coal mining waste's tendency to self-ignite

    OpenAIRE

    Tomasz Janoszek; Krzysztof Gogola; Andrzej Bajerski

    2016-01-01

    The aim of this work was to investigate the influence of anti-pyrogenic materials with use of Combustion By-Products (CBP) on the tendency of coal mining waste to self-ignite in laboratory conditions. The tested material sample was a mixture of coal waste with an addition of anti-pyrogenic material based on coal combustion by-products. The laboratory installation to test the properties of anti-pyrogenic materials is presented. The temperature of the tested sample as well as the concentration ...

  4. The Neural Association between Tendency to Forgive and Spontaneous Brain Activity in Healthy Young Adults

    OpenAIRE

    Haijiang Li; Jiamei Lu

    2017-01-01

    The tendency to forgive (TTF) refers to one’s global dispositional level of forgiveness across situations and relationships. Previous brain imaging studies examined activation patterns underlying forgiving process, yet the association between individual differences in the TTF and spontaneous brain activity at resting-state remains unknown. In this study, resting-state functional magnetic resonance imaging (fMRI) was used to investigate the correlation between the TTF and spontaneous brain act...

  5. The Neural Association between Tendency to Forgive and Spontaneous Brain Activity in Healthy Young Adults.

    Science.gov (United States)

    Li, Haijiang; Lu, Jiamei

    2017-01-01

    The tendency to forgive (TTF) refers to one's global dispositional level of forgiveness across situations and relationships. Previous brain imaging studies examined activation patterns underlying forgiving process, yet the association between individual differences in the TTF and spontaneous brain activity at resting-state remains unknown. In this study, resting-state functional magnetic resonance imaging (fMRI) was used to investigate the correlation between the TTF and spontaneous brain activity in a young adult sample. Participants were 178 young students (55 men) who completed the TTF scale and underwent a resting-state fMRI scan. Multiple regression analysis was conducted to assess the association between the regional amplitude of low-frequency fluctuations (ALFF) and TTF scores corrected for age and sex. Results showed that the ALFF value in the right dorsomedial prefrontal cortex (dmPFC), precuneus and inferior parietal lobule (IPL) were negatively associated with TTF scores. These findings suggest that the spontaneous brain activity of brain regions like the dmPFC, precuneus and IPL which are implicated in mentalizing and empathic response are associated with individual differences in the TTF.

  6. The Application for a Prediction of the Coal Spontaneous Ignition - Predisam

    Science.gov (United States)

    Moni, Vlastimil; Klouda, Petr; Blata, Jan; Helebrant, František

    2017-06-01

    The article follows the research of the project number TA01020351 called "The research of possibilities when predicting steam origin and consequent spontaneous ignition of brown coal fuels" which was researched with the support of the Technological Agency in the Czech Republic in 2011-2014 in the connection with a realized technical research. Therefore, it gives a summary information about the evaluation of the risk degree for the origin of spontaneous ignitions of the brown coal. The presented way of evaluation is based on a numeric expression of a value for MHU criteria - the point load of particular indicators is added together with other results gained from this research project. Then, more information is taken from companies running the dumps of brown coal products - both for suppliers (mining companies) and big consumers (power engineering). The complex knowledge about prediction of the origin of the spontaneous ignition enables to make an early response to eliminate a threat of mining fire in open pit mines or on the dumps of coal products. Consequently, it reduces the risk of fire and breakdowns of transportation means DPD, heavy machines and preparation plants. The working injuries are reduced as well - burns by coal in fire or inhalation of gas products from imperfect combustion.

  7. THE APPLICATION FOR A PREDICTION OF THE COAL SPONTANEOUS IGNITION – PREDISAM

    Directory of Open Access Journals (Sweden)

    Vlastimil MONI

    2017-04-01

    Full Text Available The article follows the research of the project number TA01020351 called “The research of possibilities when predicting steam origin and consequent spontaneous ignition of brown coal fuels” which was researched with the support of the Technological Agency in the Czech Republic in 2011-2014 in the connection with a realized technical research. Therefore, it gives a summary information about the evaluation of the risk degree for the origin of spontaneous ignitions of the brown coal. The presented way of evaluation is based on a numeric expression of a value for MHU criteria – the point load of particular indicators is added together with other results gained from this research project. Then, more information is taken from companies running the dumps of brown coal products – both for suppliers (mining companies and big consumers (power engineering. The complex knowledge about prediction of the origin of the spontaneous ignition enables to make an early response to eliminate a threat of mining fire in open pit mines or on the dumps of coal products. Consequently, it reduces the risk of fire and breakdowns of transportation means DPD, heavy machines and preparation plants. The working injuries are reduced as well – burns by coal in fire or inhalation of gas products from imperfect combustion.

  8. Spontaneous ignition characteristics of coal in a large-scale furnace: An experimental and numerical investigation

    International Nuclear Information System (INIS)

    Wen, Hu; Yu, Zhijin; Deng, Jun; Zhai, Xiaowei

    2017-01-01

    Highlights: • Three coal spontaneous combustion coupled models based on various flow equations were constructed and compared. • The airflow behavior in loose coal should be defined as a Brinkman flow. • The self-heating of coal in a large-scale reactor was numerically reappeared. • The effect of heat dissipated conditions on temperature profiles of broken coal was presented. - Abstract: A comprehensive understanding of the spontaneous combustion characteristics of coal in various surroundings is necessary for developing reliable test platform and predictive models. In this study, the characteristics of oxidation and self-heating combining various gas flow equations in loose coal were investigated separately and used to simulate the experimental procedure of spontaneous combustion. The main focus was to investigate the effect of thermal boundary on temperature profiles as well as spontaneous combustion period. The results showed that the numerical approach was validated by comparison with the test data. Furthermore, the model based upon Brinkman equation showed a higher accuracy, which indicated that airflow behavior influences the balances of coal oxidation and heat dissipation, thus impacts the temperature profiles of loose coal. The areas of high temperature zones would be evidently expanded and the spontaneous ignition time would be significantly accelerated if the thermal exchange between the coal and its surroundings decreased. Our results, especially for the field of engineering, have substantial effects for grasping and controlling coal spontaneous combustion disaster.

  9. INVESTIGATION OF SPONTANEOUS COMBUSTION TENDENCY

    Directory of Open Access Journals (Sweden)

    Ivan HRUŠOVSKÝ

    2015-12-01

    Full Text Available The potential of vegetable oils to undergo violent thermal oxidation is long-known problem. The process of this oxidation is investigated by the means of differential thermal analysis. Polyurethane foam was saturated with Tung oil rich in unsaturated fatty acids at three different mass rations, and airfl ow at three different rates is introduces to the sample to ensure suffi cient volume of air for oxidation. The samples were thermally stressed both dynamically and isothermally. The results were compared to results of standard differential Mackey test.

  10. Determination of te spontaneous ignition temperature of bulk materials. Simple to handle possibility for the practice; Bestimmung der Selbstentzuendungstemperatur von Schuettguetern. Einfach handhabbarer Weg fuer die Praxis

    Energy Technology Data Exchange (ETDEWEB)

    Kimpel, Sebastian; Horn, Joerg; Franke, Juergen [consilab Gesellschaft fuer Anlagensicherheit mbH, Frankfurt am Main (Germany)

    2012-06-15

    Bulk materials are widely used in industry. Bulk materials come up not only in mining (coal), in agriculture (flour) and food industry (coffee), but also in the pharmaceutical industry for example in the production of specialty chemicals and pigments. Mass-produced goods in tonnages are produced, processed, transported and stored. Due to the poor heat transfer in the bulks the relatively large storage volumes are especially critical in view of a possible self-ignition.

  11. Thermal Ignition

    Science.gov (United States)

    Boettcher, Philipp Andreas

    Accidental ignition of flammable gases is a critical safety concern in many industrial applications. Particularly in the aviation industry, the main areas of concern on an aircraft are the fuel tank and adjoining regions, where spilled fuel has a high likelihood of creating a flammable mixture. To this end, a fundamental understanding of the ignition phenomenon is necessary in order to develop more accurate test methods and standards as a means of designing safer air vehicles. The focus of this work is thermal ignition, particularly auto-ignition with emphasis on the effect of heating rate, hot surface ignition and flame propagation, and puffing flames. Combustion of hydrocarbon fuels is traditionally separated into slow reaction, cool flame, and ignition regimes based on pressure and temperature. Standard tests, such as the ASTM E659, are used to determine the lowest temperature required to ignite a specific fuel mixed with air at atmospheric pressure. It is expected that the initial pressure and the rate at which the mixture is heated also influences the limiting temperature and the type of combustion. This study investigates the effect of heating rate, between 4 and 15 K/min, and initial pressure, in the range of 25 to 100 kPa, on ignition of n-hexane air mixtures. Mixtures with equivalence ratio ranging from 0.6 to 1.2 were investigated. The problem is also modeled computationally using an extension of Semenov's classical auto-ignition theory with a detailed chemical mechanism. Experiments and simulations both show that in the same reactor either a slow reaction or an ignition event can take place depending on the heating rate. Analysis of the detailed chemistry demonstrates that a mixture which approaches the ignition region slowly undergoes a significant modification of its composition. This change in composition induces a progressive shift of the explosion limit until the mixture is no longer flammable. A mixture that approaches the ignition region

  12. Biomass ignition in mills and storages – is it explained by conventional thermal ignition theory?

    DEFF Research Database (Denmark)

    Schwarzer, Lars; Jensen, Peter Arendt; Glarborg, Peter

    Self-ignition temperatures determined in the framework of conventional thermal ignition theory does not explain why biomass is much more susceptible to spontaneous ignition in power plant mills or storages. Examining the onset of reactions at low temperatures may provide a better understanding......, suggesting that a heterogeneous oxidation is the dominating mechanism in self-ignition. It could also be shown that both mechanisms compete for reactive material. While oxidation was exothermic, pyrolysis was largely thermally neutral in these experiments. Reaction behavior was seen to depend highly...

  13. COMPULSIVE BUYING TENDENCIES.

    Science.gov (United States)

    Spinella, Marcello; Lester, David; Yang, Bijou

    2015-12-01

    Compulsive buying behavior is typically viewed as pathological, but recent research has shown that compulsive buying tendencies are associated with attitudes toward money, personal financial behavior, and having materialistic values, suggesting that compulsive buyers are manifesting an extreme form of habits shown by people in general. In a study of 240 community residents, scores on the Compulsive Buying Scale were associated positively with scores on the Material Values Scale and the Canadian Problem Gambling Index, and negatively with scores on the Executive Personal Finance Scale and Ardelt's wisdom scale. These results suggest that, as is the case for many abnormal behaviors, tendencies toward compulsive buying may not be pathological, but are associated with attitudes toward money in general, financial management behavior, and materialistic values.

  14. Accounting organizing development tendencies

    Directory of Open Access Journals (Sweden)

    G.I. Lyakhovich

    2017-12-01

    Full Text Available The development of accounting takes place under the influence of many factors. The study pays special attention to the impact of technological determinants on the process of organizing accountin. The carried-out analysis of scientists’ works allowed to determine the principal tendencies in the development of accounting organizing; these tendencies were expanded taking into account the development of technologies and innovations. It was found out the particular element, which undergo changes in the organization of accounting and the factors that prevent their further development for every tendency (the use of cloud technologies; a wide use of expert systems; a social media strategy in accounting; mobility among accounting personnel; outsourcing of accounting services, Internet things. The paper substantiates the shifts in functional duties of an accountant (the exclusion of data recording and intensification of analytical functions as a result of application of modern information and computer technologies. It was established that the amounts of accountants’ work with primary instruments will be reduced taking into account the possibilities of automatic preparation of such documents. The author substantiates the importance of the good knowledge in the field of information technologies while training accountants.

  15. Reaching ignition in the tokamak

    International Nuclear Information System (INIS)

    Furth, H.P.

    1985-06-01

    This review covers the following areas: (1) the physics of burning plasmas, (2) plasma physics requirements for reaching ignition, (3) design studies for ignition devices, and (4) prospects for an ignition project

  16. Ignition probabilities for Compact Ignition Tokamak designs

    International Nuclear Information System (INIS)

    Stotler, D.P.; Goldston, R.J.

    1989-09-01

    A global power balance code employing Monte Carlo techniques had been developed to study the ''probability of ignition'' and has been applied to several different configurations of the Compact Ignition Tokamak (CIT). Probability distributions for the critical physics parameters in the code were estimated using existing experimental data. This included a statistical evaluation of the uncertainty in extrapolating the energy confinement time. A substantial probability of ignition is predicted for CIT if peaked density profiles can be achieved or if one of the two higher plasma current configurations is employed. In other cases, values of the energy multiplication factor Q of order 10 are generally obtained. The Ignitor-U and ARIES designs are also examined briefly. Comparisons of our empirically based confinement assumptions with two theory-based transport models yield conflicting results. 41 refs., 11 figs

  17. Ignition tuning for the National Ignition Campaign

    Directory of Open Access Journals (Sweden)

    Landen O.

    2013-11-01

    Full Text Available The overall goal of the indirect-drive inertial confinement fusion [1] tuning campaigns [2] is to maximize the probability of ignition by experimentally correcting for likely residual uncertainties in the implosion and hohlraum physics [3] used in our radiation-hydrodynamic computational models, and by checking for and resolving unexpected shot-to-shot variability in performance [4]. This has been started successfully using a variety of surrogate capsules that set key laser, hohlraum and capsule parameters to maximize ignition capsule implosion velocity, while minimizing fuel adiabat, core shape asymmetry and ablator-fuel mix.

  18. Acoustic Igniter, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — An acoustic igniter eliminates the need to use electrical energy to drive spark systems to initiate combustion in liquid-propellant rockets. It does not involve the...

  19. Acoustic Igniter Project

    Data.gov (United States)

    National Aeronautics and Space Administration — An acoustic igniter eliminates the need to use electrical energy to drive spark systems to initiate combustion in liquid-propellant rockets. It does not involve the...

  20. Primer on spontaneous heating and pyrophoricity

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    This primer was prepared as an information resource for personnel responsible for operation of DOE nuclear facilities. It has sections on combustion principles, spontaneous heating/ignition of hydrocarbons and organics, pyrophoric gases and liquids, pyrophoric nonmetallic solids, pyrophoric metals (including Pu and U), and accident case studies. Although the information in this primer is not all-encompassing, it should provide the reader with a fundamental knowledge level sufficient to recognize most spontaneous combustion hazards and how to prevent ignition and widespread fires. This primer is provided as an information resource only, and is not intended to replace any fire protection or hazardous material training.

  1. Art as Visual Research: The tendency in New Tendencies

    Directory of Open Access Journals (Sweden)

    Armin Medosch

    2015-12-01

    Full Text Available This article presents the international movement New Tendencies (1961-1978 as one of the first large scale international art movements that made artist-led research a core concern. New Tendencies adopted ideas and methods from Gestalt psychology, a holistic, experimental form of psychological research, and combined it with the idea of liberating the viewer from alienation. This paper will primarily focus on the first phase of New Tendencies, from 1961 to 1963, when the movement developed its new aesthetics and poetics. The viewer was made a participant in the work by creating a relational field between work and viewer, whereby visual research was meant to replace the notion of art. This happened in the social context of the time, characterised by rapid modernisation processes in industry summarised by the term “automation”, and by a cultural Cold War in which art was exploited by both East and West.

  2. Proton Fast Ignition

    International Nuclear Information System (INIS)

    Key, M H; Freeman, R R; Hatchett, S P; MacKinnon, A J; Patel, P K; Snavely, R A; Stephens, R B

    2006-04-01

    Fast ignition (FI) by a laser generated ballistically focused proton beam is a more recently proposed alternative to the original concept of FI by a laser generated beam of relativistic electrons. It has potential advantages in less complex energy transport into dense plasma. Recent successful target heating experiments motivate further investigation of the feasibility of proton fast ignition. The concept, the physics and characteristics of the proton beams, the recent experimental work on focusing of the beams and heating of solid targets and the overall prospects for proton FI are discussed

  3. Tendencies in operating power reactors

    International Nuclear Information System (INIS)

    Brinckmann, H.F.

    1987-01-01

    A survey is given about new tendencies in operating power reactors. In order to meet the high demands for control and monitoring of power reactors modern procedures are applicated such as the incore-neutron flux detection by means of electron emission detectors and multi-component activation probes, the noise diagnostics as well as high-efficient automation systems

  4. Islamic Education: History and Tendency.

    Science.gov (United States)

    Hilgendorf, Eric

    2003-01-01

    Examines the history and tendency of Islamic education, discussing how, after 1,000 years of intellectual leadership, the Islamic world has not retained its dominance, and examining the educational institutions that both spawned and doomed the Eastern intellectual revolution. The article addresses: the role of knowledge in Islam; emphasis on…

  5. Colonialist Tendencies in Education Abroad

    Science.gov (United States)

    Sharpe, Erin K.

    2015-01-01

    This paper considers education abroad (EA) and its relationship to global citizenship and colonialism by describing and analyzing the agitated interactions of one EA course through a post-colonial lens. Rather than claim the EA experience as emancipatory or colonialist, the paper illustrates the ways that colonialist tendencies can manifest in…

  6. Dissociative Tendencies and Traffic Incidents

    Directory of Open Access Journals (Sweden)

    Valle, Virginia

    2012-01-01

    Full Text Available This paper analyses the relationship between dissociative experiences and road traffic incidents (crashes and traffic tickets in drivers (n=295 from Mar del Plata (Argentina city. A self-report questionnaire was applied to assess traffic crash involvement and sociodemographic variables. Dissociative tendencies were assessed by a modified version of the DES scale. To examine differences in DES scores tests of the difference of means were applied. Drivers who reported to be previously involved in traffic incidents obtained higher puntuations in the dissociative experiences scale than drivers who did not report such events. This result is observed for the total scale and for the three sub-scales (absorption, amnesia and depersonalization. However, differences appeared mainly for minor damage collisions. Further studies are needed to evaluate the role of dissociative tendencies as a risk factor in road traffic safety.

  7. Lignite self ignition and the use of inhibitors

    International Nuclear Information System (INIS)

    Davkova, Katica

    1995-01-01

    The tendency of coals, especially lignite, to self ignition, causes enormous losses in coal substance. The frequent mine shaft fires with an endogen character are the greatest hazard because they endanger the peoples security and also cause enormous economic damages. For that reason the contemporary science is trying to find new possibilities to increase the security in coal exploitation, as well as in its further processing and use. One of the possible solutions is the use of inhibitors. In this paper the researches of the lignite self ignition by the Olpinski method are presented. The examined lignite is taken from the coal deposit Zhivojno - Bitola. CaCl 2 in concentration of 0-20% is used as a inhibitor. At the end a mathematical model which presents the dependence of the self ignition from the used inhibitor is obtained. 8 refs., 2 figs., 4 tabs., 1 ill

  8. Machining FMS: Tendencies of Development

    OpenAIRE

    Tchijov, I.

    1989-01-01

    One of Saint-Exupery's heros said: "We are forecasting the past". This is why, in order to predict the future FMS diffusion as well as its development, the author had to analyze historical tendencies of the changes of the indicators, collected in the FMS World Data Bank. The current version of the Bank includes more than 38 indicators for about 808 FMS installed in the world industry. Approximately 750 systems give information on the year of installation, This is why a clustering of the ...

  9. Spontaneous pneumothorax

    Directory of Open Access Journals (Sweden)

    Davari R

    1996-07-01

    Full Text Available A case with bilateral spontaneous pneumothorax was presented. Etiology, mechanism, and treatment were discussed on the review of literature. Spontaneous Pneumothorax is a clinical entity resulting from a sudden non traumatic rupture of the lung. Biach reported in 1880 that 78% of 916 patients with spontaneous pneumothorax had tuberculosis. Kjergaard emphasized 1932 the primary importance of subpleural bleb disease. Currently the clinical spectrum of spontaneous pneumothorax seems to have entered a third era with the recognition of the interstitial lung disease and AIDS as a significant etiology. Standard treatment is including: observation, thoracocentesis, tube thoracostomy. Chemical pleurodesis, bullectomy or wedge resection of lung with pleural abrasion and occasionally pleurectomy. Little information has been reported regarding the efficacy of such treatment in spontaneous pneumothorax secondary to non bleb disease

  10. Burner ignition system

    Science.gov (United States)

    Carignan, Forest J.

    1986-01-21

    An electronic ignition system for a gas burner is battery operated. The battery voltage is applied through a DC-DC chopper to a step-up transformer to charge a capacitor which provides the ignition spark. The step-up transformer has a significant leakage reactance in order to limit current flow from the battery during initial charging of the capacitor. A tank circuit at the input of the transformer returns magnetizing current resulting from the leakage reactance to the primary in succeeding cycles. An SCR in the output circuit is gated through a voltage divider which senses current flow through a flame. Once the flame is sensed, further sparks are precluded. The same flame sensor enables a thermopile driven main valve actuating circuit. A safety valve in series with the main gas valve responds to a control pressure thermostatically applied through a diaphragm. The valve closes after a predetermined delay determined by a time delay orifice if the pilot gas is not ignited.

  11. Shock Tube Ignition Delay Data Affected by Localized Ignition Phenomena

    KAUST Repository

    Javed, Tamour

    2016-12-29

    Shock tubes have conventionally been used for measuring high-temperature ignition delay times ~ O(1 ms). In the last decade or so, the operating regime of shock tubes has been extended to lower temperatures by accessing longer observation times. Such measurements may potentially be affected by some non-ideal phenomena. The purpose of this work is to measure long ignition delay times for fuels exhibiting negative temperature coefficient (NTC) and to assess the impact of shock tube non-idealities on ignition delay data. Ignition delay times of n-heptane and n-hexane were measured over the temperature range of 650 – 1250 K and pressures near 1.5 atm. Driver gas tailoring and long length of shock tube driver section were utilized to measure ignition delay times as long as 32 ms. Measured ignition delay times agree with chemical kinetic models at high (> 1100 K) and low (< 700 K) temperatures. In the intermediate temperature range (700 – 1100 K), however, significant discrepancies are observed between the measurements and homogeneous ignition delay simulations. It is postulated, based on experimental observations, that localized ignition kernels could affect the ignition delay times at the intermediate temperatures, which lead to compression (and heating) of the bulk gas and result in expediting the overall ignition event. The postulate is validated through simple representative computational fluid dynamic simulations of post-shock gas mixtures which exhibit ignition advancement via a hot spot. The results of the current work show that ignition delay times measured by shock tubes may be affected by non-ideal phenomena for certain conditions of temperature, pressure and fuel reactivity. Care must, therefore, be exercised in using such data for chemical kinetic model development and validation.

  12. Central ignition scenarios for TFTR

    Energy Technology Data Exchange (ETDEWEB)

    Zweben, S.J.; Redi, M.H.; Bateman, G.

    1986-03-01

    The possibility of obtaining ignition in TFTR by means of very centrally peaked density profiles is examined. It is shown that local central alpha heating can be made to exceed local central energy losses (''central ignition'') under global conditions for which Q greater than or equal to 1. Time dependent 1-D transport simulations show that the normal global ignition requirements are substantially relaxed for plasmas with peaked density profiles. 18 refs., 18 figs.

  13. Central ignition scenarios for TFTR

    International Nuclear Information System (INIS)

    Zweben, S.J.; Redi, M.H.; Bateman, G.

    1986-03-01

    The possibility of obtaining ignition in TFTR by means of very centrally peaked density profiles is examined. It is shown that local central alpha heating can be made to exceed local central energy losses (''central ignition'') under global conditions for which Q greater than or equal to 1. Time dependent 1-D transport simulations show that the normal global ignition requirements are substantially relaxed for plasmas with peaked density profiles. 18 refs., 18 figs

  14. High-Gain Shock Ignition on the National Ignition Facility

    Science.gov (United States)

    Perkins, L. J.; Lafortune, K.; Bailey, D.; Lambert, M.; MacKinnon, A.; Blackfield, D.; Comley, A.; Schurtz, G.; Ribeyre, X.; Lebel, E.; Casner, A.; Craxton, R. S.; Betti, R.; McKenty, P.; Anderson, K.; Theobald, W.; Schmitt, A.; Atzeni, S.; Schiavi, A.

    2010-11-01

    Shock ignition offers the possibility for a near-term test of high-gain ICF on the NIF at less than 1MJ drive energy and with day-1 laser hardware. We will summarize the status of target performance simulations, delineate the critical issues and describe the R&D program to be performed in order to test the potential of a shock-ignited target on NIF. In shock ignition, compressed fuel is separately ignited by a late-time laser-driven shock and, because capsule implosion velocities are significantly lower than those required for conventional hotpot ignition, simulations indicate that fusion energy gains of 60 may be achievable at laser energies around 0.5MJ. Like fast ignition, shock ignition offers high gain but requires only a single laser with less demanding timing and focusing requirements. Conventional symmetry and stability constraints apply, thus a key immediate step towards attempting shock ignition on NIF is to demonstrate adequacy of low-mode uniformity and shock symmetry under polar drive

  15. Criminal tendencies and psychological testing

    Directory of Open Access Journals (Sweden)

    Sobchik L. N.

    2017-04-01

    Full Text Available Methods of psychological diagnostics closer to the psychology main research areas, which involve measuring the accuracy and statistical reliability. A set of methods that includes questionnaires should be complemented with projective tests in which the stimulus material is verbal in nature. The article presents the results of surveys of different groups of persons in conflict with the law, as well as screening tests contingent of youth groups and adolescents. High performance, spontaneously manifested aggressiveness, traits, emotional immaturity, low self-control and primitive-the requirement of the hierarchy of values at statistically significant level are identified in the data psychodiagnostic study, thus allowing to allocate the risk of wrongful conduct and to develop preventive measures of psycho-pedagogical and social nature. Psychological testing is an effective tool in the study of criminal predisposici and gives the key to a science-based approach in the development of preventive measures aimed at reducing crime.

  16. General measure of Enterprising Tendency test

    OpenAIRE

    Caird, Sally

    2013-01-01

    The General measure of Enterprising Tendency test (GET2) is a measure of enterprising tendency developed for educational use and self assessment. It measures five entrepreneurial attributes, namely Need for achievement, Need for Autonomy, Creative Tendency, Calculated Risk taking and Locus of control, providing interpretation for this enterprising attributes. Since 1998 there has been considerable worldwide interest in the test of General Enterprising Tendency (GET test) developed and tested ...

  17. Rocket Ignition Demonstrations Using Silane

    Science.gov (United States)

    Pal, Sibtosh; Santoro, Robert; Watkins, William B.; Kincaid, Kevin

    1998-01-01

    Rocket ignition demonstration tests using silane were performed at the Penn State Combustion Research Laboratory. A heat sink combustor with one injection element was used with gaseous propellants. Mixtures of silane and hydrogen were used as fuel, and oxygen was used as oxidizer. Reliable ignition was demonstrated using fuel lead and and a swirl injection element.

  18. The Compact Ignition Tokamak

    International Nuclear Information System (INIS)

    Schmidt, J.

    1987-01-01

    The author discusses his lab's plan for completing the Compact Ignition Tokamak (CIT) conceptual design during calendar year 1987. Around July 1 they froze the subsystem envelopes on the device to continue with the conceptual design. They did this by formalizing a general requirements document. They have been developing the management plan and submitted a version to the DOE July 10. He describes a group of management activities. They released the vacuum vessel Request For Proposals (RFP) on August 5. An RFP to do a major part of the system engineering on the device is being developed. They intend to assemble the device outside of the test cell, then move it into the the test cell, install it there, and bring to the test cell many of the auxiliary facilities from TFTR, for example, power supplies

  19. Reversed field pinch ignition requirements

    International Nuclear Information System (INIS)

    Werley, K.A.

    1991-01-01

    Plasma models are described and used to calculated numerically the transport confinement (nτ E ) requirements and steady state operation points for both the reversed field pinch (RFP) and the tokamak. The models are used to examine the CIT tokamak ignition conditions and the RFP experimental and ignition conditions. Physics differences between RFPs and tokamaks and their consequences for a D-T ignition machine are discussed. Compared with a tokamak, the ignition RFP has many physics advantages, including Ohmic heating to ignition (no need for auxiliary heating systems), higher beta, lower ignition current, less sensitivity of ignition requirements to impurity effects, no hard disruptions (associated with beta or density limits) and successful operation with high radiation fractions (f RAD ∼ 0.95). These physics advantages, coupled with important engineering advantages associated with lower external magnetic field, larger aspect ratios and smaller plasma cross-sections, translate to significant cost reductions for both ignition and reactor applications. The primary drawback of the RFP is the uncertainty that the present scaling will extrapolate to reactor regimes. Devices that are under construction should go a long way toward resolving this scaling uncertainty. The 4 MA ZTH is expected to extend the nτ E transport scaling data by three orders of magnitude above the results of ZT-40M, and, if the present scaling holds, ZTH is expected to achieve a D-T equivalent scientific energy breakeven, Q = 1. A base case RFP ignition point is identified with a plasma current of 8.1 MA and no auxiliary heating. (author). 19 refs, 11 figs, 3 tabs

  20. Spontaneous deregulation

    NARCIS (Netherlands)

    Edelman, Benjamin; Geradin, Damien

    Platform businesses such as Airbnb and Uber have risen to success partly by sidestepping laws and regulations that encumber their traditional competitors. Such rule flouting is what the authors call “spontaneous private deregulation,” and it’s happening in a growing number of industries. The authors

  1. Plans for ignition experiments on the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Moses, E.I.; Meier, W.R. [Lawrence Livermore National Laboratory, Livermore, CA (United States)

    2007-07-01

    The National Ignition Facility (NIF) is a 192 beam Nd-glass laser facility presently under construction at LLNL for performing ignition experiments for inertial confinement fusion (ICF) and experiments studying high energy density (HED) science. NIF will produce 1.8 MJ, 500 TW of ultraviolet light making it the world's largest and most powerful laser system. NIF will be the world's preeminent facility for the study of matter at extreme temperatures and densities producing and for developing ICF. The ignition studies will be the next important step in developing inertial fusion energy. The NIF Project is over 90% complete and scheduled for completion in 2009. The building and nearly the entire beam path have been completed. The Project is presently installing the optics and electronics and commissioning the beams. Over half of the optical and electronics components needed to complete the Project have been installed. One cluster of 48 beams has been commissioned in the laser bay with the demonstrated capability of producing 1000 kJ of 1053 nm light (1), nearly ten times the capability of Nova or Omega, the previous largest laser systems. In addition, experiments using one beam have demonstrated that NIF can meet all of its performance goals. A detailed plan called the National Ignition Campaign (NIC) has been developed to begin ignition experiments in 2010. The plan includes the target physics and the equipment such as diagnostics, cryogenic target manipulator and user optics required for the ignition experiment. Target designs have been developed that calculate to ignite at energy as low as 1 MJ. Experiments using the OMEGA laser at the University of Rochester are validating these designs. Development of manufacturing capability is well under way for producing these targets to the required tolerances. Diagnostics and other support equipment is being designed and fabricated to perform the ignition experiments. (orig.)

  2. Prevalence of Violence Tendency in Adolescents

    OpenAIRE

    Özlem HASKAN AVCI; İbrahim YILDIRIM

    2015-01-01

    The aim of this study is to analyze the extensiveness of violence tendency to depending on individual and family factors in adolescents. For this purpose, information has been collected from 899 high school students educated in state schools located in Adana province. Violence Tendency Scale (VTS) developed by Haskan and Yıldırım (2012) has been used in order to determine the violence tendency levels of the students. The prevalence of students’ tendency has been tested with chi-square. When a...

  3. Ignition of Aluminum Particles and Clouds

    Energy Technology Data Exchange (ETDEWEB)

    Kuhl, A L; Boiko, V M

    2010-04-07

    Here we review experimental data and models of the ignition of aluminum (Al) particles and clouds in explosion fields. The review considers: (i) ignition temperatures measured for single Al particles in torch experiments; (ii) thermal explosion models of the ignition of single Al particles; and (iii) the unsteady ignition Al particles clouds in reflected shock environments. These are used to develop an empirical ignition model appropriate for numerical simulations of Al particle combustion in shock dispersed fuel explosions.

  4. The National Ignition Facility Project

    International Nuclear Information System (INIS)

    Paisner, J.A.; Campbell, E.M.; Hogan, W.J.

    1994-01-01

    The mission of the National Ignition Facility is to achieve ignition and gain in inertial confinement fusion targets in the laboratory. The facility will be used for defense applications such as weapons physics and weapons effects testing, and for civilian applications such as fusion energy development and fundamental studies of matter at high temperatures and densities. This paper reviews the design, schedule, and costs associated with the construction project

  5. The National Ignition Facility Project

    International Nuclear Information System (INIS)

    Paisner, J.A.; Campbell, E.M.; Hogan, W.J.

    1994-01-01

    The mission of the National Ignition Facility is to achieve ignition and gain in ICF targets in the laboratory. The facility will be used for defense applications such as weapons physics and weapons effect testing, and for civilian applications such as fusion energy development and fundamental studies of matter at high temperatures and densities. This paper reviews the design, schedule and costs associated with the construction project

  6. Alcohol ignition interlock programs.

    Science.gov (United States)

    Beirness, D J; Marques, P R

    2004-09-01

    The alcohol ignition interlock is an in-vehicle DWI control device that prevents a car from starting until the operator provides a breath alcohol concentration (BAC) test below a set level, usually .02% (20 mg/dl) to .04% (40 mg/dl). The first interlock program was begun as a pilot test in California 18 years ago; today all but a few US states, and Canadian provinces have interlock enabling legislation. Sweden has recently implemented a nationwide interlock program. Other nations of the European Union and as well as several Australian states are testing it on a small scale or through pilot research. This article describes the interlock device and reviews the development and current status of interlock programs including their public safety benefit and the public practice impediments to more widespread adoption of these DWI control devices. Included in this review are (1) a discussion of the technological breakthroughs and certification standards that gave rise to the design features of equipment that is in widespread use today; (2) a commentary on the growing level of adoption of interlocks by governments despite the judicial and legislative practices that prevent more widespread use of them; (3) a brief overview of the extant literature documenting a high degree of interlock efficacy while installed, and the rapid loss of their preventative effect on repeat DWI once they are removed from the vehicles; (4) a discussion of the representativeness of subjects in the current research studies; (5) a discussion of research innovations, including motivational intervention efforts that may extend the controlling effect of the interlock, and data mining research that has uncovered ways to use the stored interlock data record of BAC tests in order to predict high risk drivers; and (6) a discussion of communication barriers and conceptual rigidities that may be preventing the alcohol ignition interlock from taking a more prominent role in the arsenal of tools used to control

  7. Ignition inhibitors for cellulosic materials

    International Nuclear Information System (INIS)

    Alvares, N.J.

    1976-01-01

    By exposing samples to various irradiance levels from a calibrated thermal radiation source, the ignition responses of blackened alpha-cellulose and cotton cloth with and without fire-retardant additives were compared. Samples treated with retardant compounds which showed the most promise were then isothermally pyrolyzed in air for comparisons between the pyrolysis rates. Alpha-cellulose samples containing a mixture of boric acid, borax, and ammonium di-hydrogen phosphate could not be ignited by irradiances up to 4.0 cal cm -2 s-1 (16.7 W/cm 2 ). At higher irradiances the specimens ignited, but flaming lasted only until the flammable gases were depleted. Cotton cloth containing a polymeric retardant with the designation THPC + MM was found to be ignition-resistant to all irradiances below 7.0 cal cm -2 s -1 (29.3 W/cm 2 ). Comparison of the pyrolysis rates of the retardant-treated alpha-cellulose and the retardant-treated cotton showed that the retardant mechanism is qualitatively the same. Similar ignition-response measurements were also made with specimens exposed to ionizing radiation. It was observed that gamma radiation results in ignition retardance of cellulose, while irradiation by neutrons does not

  8. Fast ignition breakeven scaling

    International Nuclear Information System (INIS)

    Slutz, Stephen A.; Vesey, Roger Alan

    2005-01-01

    A series of numerical simulations have been performed to determine scaling laws for fast ignition break even of a hot spot formed by energetic particles created by a short pulse laser. Hot spot break even is defined to be when the fusion yield is equal to the total energy deposited in the hot spot through both the initial compression and the subsequent heating. In these simulations, only a small portion of a previously compressed mass of deuterium-tritium fuel is heated on a short time scale, i.e., the hot spot is tamped by the cold dense fuel which surrounds it. The hot spot tamping reduces the minimum energy required to obtain break even as compared to the situation where the entire fuel mass is heated, as was assumed in a previous study [S. A. Slutz, R. A. Vesey, I. Shoemaker, T. A. Mehlhorn, and K. Cochrane, Phys. Plasmas 7, 3483 (2004)]. The minimum energy required to obtain hot spot break even is given approximately by the scaling law E T = 7.5(ρ/100) -1.87 kJ for tamped hot spots, as compared to the previously reported scaling of E UT = 15.3(ρ/100) -1.5 kJ for untamped hotspots. The size of the compressed fuel mass and the focusability of the particles generated by the short pulse laser determines which scaling law to use for an experiment designed to achieve hot spot break even

  9. Observation of spontaneous combustion of hydrogen and oxygen in microbubbles

    NARCIS (Netherlands)

    Postnikov, A.V.; Uvarov, I.V.; Prokaznikov, A.V.; Svetovoy, Vitaly

    2016-01-01

    Experimental evidence is presented that combustion can ignite at room temperature spontaneously inside microbubbles filled with mixture of hydrogen and oxygen. We perform water electrolysis in a closed microchamber by voltage pulses of alternating polarity at repetition frequencies 100 kHz to pump

  10. Progress Toward Ignition on the National Ignition Facility

    International Nuclear Information System (INIS)

    Kauffman, R.L.

    2011-01-01

    The principal approach to ignition on the National Ignition Facility (NIF) is indirect drive. A schematic of an ignition target is shown in Figure 1. The laser beams are focused through laser entrance holes at each end of a high-Z cylindrical case, or hohlraum. The lasers irradiate the hohlraum walls producing x-rays that ablate and compress the fuel capsule in the center of the hohlraum. The hohlraum is made of Au, U, or other high-Z material. For ignition targets, the hohlraum is ∼0.5 cm diameter by ∼1 cm in length. The hohlraum absorbs the incident laser energy producing x-rays for symmetrically imploding the capsule. The fuel capsule is a ∼2-mm-diameter spherical shell of CH, Be, or C filled with DT fuel. The DT fuel is in the form of a cryogenic layer on the inside of the capsule. X-rays ablate the outside of the capsule, producing a spherical implosion. The imploding shell stagnates in the center, igniting the DT fuel. NIC has overseen installation of all of the hardware for performing ignition experiments, including commissioning of approximately 50 diagnostic systems in NIF. The diagnostics measure scattered optical light, x-rays from the hohlraum over the energy range from 100 eV to 500 keV, and x-rays, neutrons, and charged particles from the implosion. An example of a diagnostic is the Magnetic Recoil Spectrometer (MRS) built by a collaboration of scientists from MIT, UR-LLE, and LLNL shown in Figure 2. MRS measures the neutron spectrum from the implosion, providing information on the neutron yield and areal density that are metrics of the quality of the implosion. Experiments on NIF extend ICF research to unexplored regimes in target physics. NIF can produce more than 50 times the laser energy and more than 20 times the power of any previous ICF facility. Ignition scale hohlraum targets are three to four times larger than targets used at smaller facilities, and the ignition drive pulses are two to five times longer. The larger targets and longer

  11. Review: laser ignition for aerospace propulsion

    Directory of Open Access Journals (Sweden)

    Steven A. O’Briant

    2016-03-01

    This paper aims to provide the reader an overview of advanced ignition methods, with an emphasis on laser ignition and its applications to aerospace propulsion. A comprehensive review of advanced ignition systems in aerospace applications is performed. This includes studies on gas turbine applications, ramjet and scramjet systems, and space and rocket applications. A brief overview of ignition and laser ignition phenomena is also provided in earlier sections of the report. Throughout the reading, research papers, which were presented at the 2nd Laser Ignition Conference in April 2014, are mentioned to indicate the vast array of projects that are currently being pursued.

  12. Progress Towards Ignition on the National Ignition Facility

    Science.gov (United States)

    Edwards, John

    2012-10-01

    Since completion of the National Ignition Facility (NIF) construction project in March 2009, a wide variety of diagnostics, facility infrastructure, and experimental platforms have been commissioned in pursuit of generating the conditions necessary to reach thermonuclear ignition in the laboratory via the inertial confinement approach. NIF's capabilities and infrastructure include over 50 X-ray, optical, and nuclear diagnostics systems and the ability to shoot cryogenic DT layered capsules. There are two main approaches to ICF: direct drive in which laser light impinges directly on a capsule containing a solid layer of DT fuel, and indirect drive in which the laser light is first converted to thermal X-rays. To date NIF has been conducting experiments using the indirect drive approach, injecting up to 1.8MJ of ultraviolet light (0.35 micron) into 1 cm scale cylindrical gold or gold-coated uranium, gas-filled hohlraums, to implode 1mm radius plastic capsules containing solid DT fuel layers. In order to achieve ignition conditions the implosion must be precisely controlled. The National Ignition Campaign (NIC), an international effort with the goal of demonstrating thermonuclear burn in the laboratory, is making steady progress toward this. Utilizing precision pulse-shaping experiments in early 2012 the NIC achieve fuel rhoR of approximately 1.2 gm/cm^2 with densities of around 600-800 g/cm^3 along with neutron yields within about a factor of 5 necessary to enter a regime in which alpha particle heating will become important. To achieve these results, experimental platforms were developed to carefully control key attributes of the implosion. This talk will review NIF's capabilities and the progress toward ignition, as well as the physics of ignition targets on NIF and on other facilities. Acknowledgement: this work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

  13. Enhanced Model for Fast Ignition

    Energy Technology Data Exchange (ETDEWEB)

    Mason, Rodney J. [Research Applications Corporation, Los Alamos, NM (United States)

    2010-10-12

    Laser Fusion is a prime candidate for alternate energy production, capable of serving a major portion of the nation's energy needs, once fusion fuel can be readily ignited. Fast Ignition may well speed achievement of this goal, by reducing net demands on laser pulse energy and timing precision. However, Fast Ignition has presented a major challenge to modeling. This project has enhanced the computer code ePLAS for the simulation of the many specialized phenomena, which arise with Fast Ignition. The improved code has helped researchers to understand better the consequences of laser absorption, energy transport, and laser target hydrodynamics. ePLAS uses efficient implicit methods to acquire solutions for the electromagnetic fields that govern the accelerations of electrons and ions in targets. In many cases, the code implements fluid modeling for these components. These combined features, "implicitness and fluid modeling," can greatly facilitate calculations, permitting the rapid scoping and evaluation of experiments. ePLAS can be used on PCs, Macs and Linux machines, providing researchers and students with rapid results. This project has improved the treatment of electromagnetics, hydrodynamics, and atomic physics in the code. It has simplified output graphics, and provided new input that avoids the need for source code access by users. The improved code can now aid university, business and national laboratory users in pursuit of an early path to success with Fast Ignition.

  14. Büroo Ignite = Ignite office / Priit Põldme, Reet Sepp

    Index Scriptorium Estoniae

    Põldme, Priit, 1971-

    2013-01-01

    Büroo Ignite (Tatari 25, Tallinn) sisekujundusest. Sisearhitektid Priit Põldme ja Reet Sepp (SAB Joonprojekt). Arhitektid Heiki Taras ja Ahti Luhaäär (Arhitektibüroo Pilter ja Taras). Sisearhitekti ja ESLi aastapreemiate žürii esimehe Kaido Kivi arvamus

  15. LASER IGNITION SYSTEM FOR INTERNAL COMBUSTION ENGINE

    OpenAIRE

    Mr.Utsav Kothari*; Mr.Pravin Bharane; Mr.Akash Modasara

    2016-01-01

    Laser ignition is considered to be one of the most promising future ignition concepts for internal combustion engines. It not only combines requirement of reduction of pollutant emissions but also improves engine efficiencies. In general, a well-defined ignition location and ignition time is of great importance for an IC engine. Spark plugs are well suited for such tasks but suffer from disadvantages, like erosion of electrodes & inflexible or un-optimal location of spark plug. Also the conv...

  16. Surface breakdown igniter for mercury arc devices

    Science.gov (United States)

    Bayless, John R.

    1977-01-01

    Surface breakdown igniter comprises a semiconductor of medium resistivity which has the arc device cathode as one electrode and has an igniter anode electrode so that when voltage is applied between the electrodes a spark is generated when electrical breakdown occurs over the surface of the semiconductor. The geometry of the igniter anode and cathode electrodes causes the igniter discharge to be forced away from the semiconductor surface.

  17. Ignition of Propellants Through Nanostructured Materials

    Science.gov (United States)

    2016-03-31

    The liquid fuel was injected at a rate of about 3 cm3/min through a programmable syringe pump . These images were captured at 2000 FPS and...and nano-energetics for ignition of fuel spray. There are a number of properties that are desirable for an ignition system. Ideally an ignition...of conditions in order to maximize the operational flexibility of energy and propulsion systems. We have studied the ignition of liquid fuel and

  18. Structure ignition assessment model (SIAM)\\t

    Science.gov (United States)

    Jack D. Cohen

    1995-01-01

    Major wildland/urban interface fire losses, principally residences, continue to occur. Although the problem is not new, the specific mechanisms are not well known on how structures ignite in association with wildland fires. In response to the need for a better understanding of wildland/urban interface ignition mechanisms and a method of assessing the ignition risk,...

  19. Tank farm potential ignition sources

    International Nuclear Information System (INIS)

    Scaief, C.C. III.

    1996-01-01

    This document identifies equipment, instrumentation, and sensors that are located in-tank as well as ex-tank in areas that may have communication paths with the tank vapor space. For each item, and attempt is made to identify the potential for ignition of flammable vapors using a graded approach. The scope includes all 177 underground storage tanks

  20. Laser ignition application in a space experiment

    Science.gov (United States)

    Liou, Larry C.; Culley, Dennis E.

    1993-01-01

    A laser ignition system is proposed for the Combustion Experiment Module on an orbiting spacecraft. The results of a design study are given using the scheduled 'Flame Ball Experiment' as the design guidelines. Three laser ignition mechanisms and wavelengths are evaluated. A prototype laser is chosen and its specifications are given, followed by consideration of the beam optical arrangement, the ignition power requirement, the laser ignition system weight, size, reliability, and laser cooling and power consumption. Electromagnetic interference to the onboard electronics caused by the laser ignition process is discussed. Finally, ground tests are suggested.

  1. Desensitizing nano powders to electrostatic discharge ignition

    Energy Technology Data Exchange (ETDEWEB)

    Steelman, Ryan [Texas Tech Univ., Lubbock, TX (United States). Dept. of Mechanical Engineering; Clark, Billy [Texas Tech Univ., Lubbock, TX (United States). Dept. of Mechanical Engineering; Pantoya, Michelle L. [Texas Tech Univ., Lubbock, TX (United States). Dept. of Mechanical Engineering; Heaps, Ronald J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Daniels, Michael A. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-08-01

    Electrostatic discharge (ESD) is a main cause for ignition in powder media ranging from grain silos to fireworks. Nanoscale particles are orders of magnitude more ESD ignition sensitive than their micron scale counterparts. This study shows that at least 13 vol. % carbon nanotubes (CNT) added to nano-aluminum and nano-copper oxide particles (nAl + CuO) eliminates ESD ignition sensitivity. The CNT act as a conduit for electric energy and directs electric charge through the powder to desensitize the reactive mixture to ignition. For nanoparticles, the required CNT concentration for desensitizing ESD ignition acts as a diluent to quench energy propagation.

  2. Focus issue introduction: Laser Ignition Conference.

    Science.gov (United States)

    Taira, Takunori; Furutani, Hirohide; Guo, Chunlei; Wintner, Ernst; Akamatsu, Fumiteru; Lucht, Robert; Washio, Kunihiko

    2014-03-10

    The purpose of this feature issue is to share information on laser ignition and related sciences and technologies. This feature offers five papers in the field that cover aspects of laser-induced laser ignition, including novel giant pulse micro-lasers, new phenomena of laser breakdown, advanced combustion systems and applications. These topics were chosen from the first Laser Ignition Conference (LIC) covering the topics of high brightness lasers for ignition and diagnostics, laser ignited engines for power generators and vehicles, and from a joint symposium with the Laser Display Conference covering applications of high brightness lasers.

  3. Development tendencies of moulding and core sands

    Directory of Open Access Journals (Sweden)

    Stanislaw M. Dobosz1

    2011-11-01

    Full Text Available Further development of the technology for making moulding and core sands will be strictly limited by tough requirements due to protection of the natural environment. These tendencies are becoming more and more tense, so that we will reach a point when even processes, that from technological point of view fulfill high requirements of the foundry industry, must be replaced by more ecologically-friendly solutions. Hence, technologies using synthetic resins as binding materials will be limited. This paper presents some predictable development tendencies of moulding and core sands. The increasing role of inorganic substances will be noticed, including silicate binders with significantly improved properties, such as improved knock-out property or higher reclamation strength. Other interesting solutions might also be moulding sands bonded by geo-polymers and phosphate binders or salts and also binders based on degradable biopolymers. These tendencies and the usefulness of these binders are put forward in this paper.

  4. The effect of kerosene injection on ignition probability of local ignition in a scramjet combustor

    Science.gov (United States)

    Bao, Heng; Zhou, Jin; Pan, Yu

    2017-03-01

    The spark ignition of kerosene is investigated in a scramjet combustor with a flight condition of Ma 4, 17 km. Based plentiful of experimental data, the ignition probabilities of the local ignition have been acquired for different injection setups. The ignition probability distributions show that the injection pressure and injection location have a distinct effect on spark ignition. The injection pressure has both upper and lower limit for local ignition. Generally, the larger mass flow rate will reduce the ignition probability. The ignition position also affects the ignition near the lower pressure limit. The reason is supposed to be the cavity swallow effect on upstream jet spray near the leading edge, which will make the cavity fuel rich. The corner recirculation zone near the front wall of the cavity plays a significant role in the stabilization of local flame.

  5. Tritium and ignition target management at the National Ignition Facility.

    Science.gov (United States)

    Draggoo, Vaughn

    2013-06-01

    Isotopic mixtures of hydrogen constitute the basic fuel for fusion targets of the National Ignition Facility (NIF). A typical NIF fusion target shot requires approximately 0.5 mmoles of hydrogen gas and as much as 750 GBq (20 Ci) of 3H. Isotopic mix ratios are specified according to the experimental shot/test plan and the associated test objectives. The hydrogen isotopic concentrations, absolute amounts, gas purity, configuration of the target, and the physical configuration of the NIF facility are all parameters and conditions that must be managed to ensure the quality and safety of operations. An essential and key step in the preparation of an ignition target is the formation of a ~60 μm thick hydrogen "ice" layer on the inner surface of the target capsule. The Cryogenic Target Positioning System (Cryo-Tarpos) provides gas handling, cyro-cooling, x-ray imaging systems, and related instrumentation to control the volumes and temperatures of the multiphase (solid, liquid, and gas) hydrogen as the gas is condensed to liquid, admitted to the capsule, and frozen as a single spherical crystal of hydrogen in the capsule. The hydrogen fuel gas is prepared in discrete 1.7 cc aliquots in the LLNL Tritium Facility for each ignition shot. Post-shot hydrogen gas is recovered in the NIF Tritium Processing System (TPS). Gas handling systems, instrumentation and analytic equipment, material accounting information systems, and the shot planning systems must work together to ensure that operational and safety requirements are met.

  6. World energy tendencies: social and environmental implications

    International Nuclear Information System (INIS)

    Pichs, Ramon

    2007-01-01

    The current world energy situation is the result of the combination of diverse economic, political, technological, social and environmental tendencies that conform a crisis panorama for the high price of the hydrocarbons and especially in the petroleum. Under the current conditions the necessity of a global energy restructuring is imposed that changes the current patterns of generation and energy consumption significantly

  7. counselling students with depressive tendencies for better ...

    African Journals Online (AJOL)

    LUCY

    licking ice cream, putting on smiling face whether one feels like smiling or not. RECOMMENDATION. Although cognitive restructuring could be practiced on group basis. It is better on one on one basis as this offers students opportunity to open up. CONCLUSION. Depressive tendency can actually lead to depression, if there ...

  8. The Ignition Physics Study Group

    International Nuclear Information System (INIS)

    Sheffield, J.

    1987-01-01

    In the US magnetic fusion program there have been relatively few standing committees of experts, with the mandate to review a particular sub-area on a continuing basis. Generally, ad hoc committees of experts have been assembled to advise on a particular issue. There has been a lack of broad, systematic and continuing review and analysis, combining the wisdom of experts in the field, in support of decision making. The Ignition Physics Study Group (IPSG) provides one forum for the systematic discussion of fusion science, complementing the other exchanges of information, and providing a most important continuity in this critical area. In a similar manner to the European program, this continuity of discussion and the focus provided by a national effort, Compact Ignition Tokamak (CIT), and international effort, Engineering Test Reactor (ETR), are helping to lower those barriers which previously were an impediment to rational debate

  9. Low current approach to ignition

    International Nuclear Information System (INIS)

    Cenacchi, G.; Sugiyama, L.; Airoldi, A.; Coppi, B.

    1996-01-01

    The open-quotes standardclose quotes path to achieve ignition conditions so far has been that of producing plasmas with the maximum current and poloidal field that axe compatible with the applied toroidal field and the geometry of the adopted configuration (the low q a approach.) The other approach is that motivated by recent experiments with reversed shear configurations, with relatively low currents and high fields corresponding to high values of q a (e-g., q a ≅ 6). While the first approach can be pursued with ohmic heating alone, the second one necessarily involves an auxiliary heating system. One of the advantages of this approach is that the onset of large scale internal modes can be avoided as q(ψ) is kept above 1 over the entire plasma column. Since quite peaked density profiles are produced in the regimes where enhanced confinement is observed, the α-particle power levels for which ignition can be reached and therefore the thermal wall loading on the first wall, can be reduced relatively to the standard, low q a , approach. The possibility is considered that ignition is reached in the reversed shear, high q a , regime and that this is followed by a transition to non-reversed profiles, or even the low q a regime, assuming that the excitation of modes involving magnetic reconnection will not undermine the needed degree of confinement. These results have been demonstrated by numerical transport simulation for the Ignitor-Ult machine, but are applicable to all high field ignition experiments

  10. A sustained-arc ignition system for internal combustion engines

    Science.gov (United States)

    Birchenough, A. G.

    1977-01-01

    A sustained-arc ignition system was developed for internal combustion engines. It produces a very-long-duration ignition pulse with an energy in the order of 100 millijoules. The ignition pulse waveform can be controlled to predetermined actual ignition requirements. The design of the sustained-arc ignition system is presented in the report.

  11. Compulsive buying tendencies and personal finances.

    Science.gov (United States)

    Spinella, Marcello; Lester, David; Yang, Bijou

    2014-12-01

    In a community sample of 225 adults, scores on the Compulsive Buying Scale were associated with scores on the subscales of the Executive Personal Finance Scale (rs = -.35 to -.70) and the Money Attitudes Scale (positively with using money for impressing others, and negatively with saving and planning). The results suggested that common tendencies toward compulsive buying may not be pathological, but merely associated with attitudes toward money in general and financial management habits.

  12. The method of search of tendencies

    International Nuclear Information System (INIS)

    Reuss, Paul.

    1981-08-01

    The search of tendencies is an application of the mean squares method. Its objective is the better possible evaluation of the basic data used in the calculations from the comparison between measurements of integral characteristics and the corresponding theoretical results. This report presents the minimization which allows the estimation of the basic data and, above all, the methods which are necessary for the critical analysis of the obtained results [fr

  13. Sleep Tendency and Ability to Sustain Wakefulness

    Science.gov (United States)

    2000-03-01

    alvays showed sleep latencies sleepability and wakeability. Subject A.C. in the pathological range, except than during the showed a high ability to...schedule. efficiently. These subjects seem to be III. Gates and <forbidden zones> for sleep . pathologically sleepy, but they do not show any...UNCLASSIFIED Defense Technical Information Center Compilation Part Notice ADPO10464 TITLE: Sleep Tendency and Ability to Sustain Wakefulness

  14. Understanding Biomass Ignition in Power Plant Mills

    DEFF Research Database (Denmark)

    Schwarzer, Lars; Jensen, Peter Arendt; Glarborg, Peter

    2017-01-01

    Converting existing coal fired power plants to biomass is a readily implemented strategy to increase the share of renewable energy. However, changing from one fuel to another is not straightforward: Experience shows that wood pellets ignite more readily than coal in power plant mills or storages....... This is not very well explained by apply-ing conventional thermal ignition theory. An experimental study at lab scale, using pinewood as an example fuel, was conducted to examine self-heating and self-ignition. Supplemental experiments were performed with bituminous coal. Instead of characterizing ignition...

  15. Analytic tendencies in modern Polish and Russian

    Directory of Open Access Journals (Sweden)

    Wojciech Sosnowski

    2015-11-01

    Full Text Available Analytic tendencies in modern Polish and Russian Modern Polish and Russian are characterized by some features which demonstrate an increasing level of analitism. In the process of transformation from synthetic to analytical language, a crucial role is played by prepositional units. In this research, analitism is understood in a traditional way as a morphological and syntactic phenomenon. The fact that the synthetic structure of a language may, in some conditions, turn into an analytical one, as happened in the case of Bulgarian and Macedonian, has been intriguing linguists ever since, and has made me attempt to answer the question: What is the condition of modern Polish and Russian, which are languages with a rich literary tradition and solid grammatical norms, which belong to a group of synthetic languages? The analytical tendencies in morphology include the following: a decrease in the number of cases in all inflected parts of speech; a more frequent use of uninflected nouns and adjectives; the growing importance of nouns with common gender, and, in particular, the use of forms of masculine gender to depict feminine gender; differences in expressing collectiveness in a group of nouns (using collective meaning for forms that have singular meaning; substituting case forms with prepositions; substituting case forms with subordinate clauses; substituting case forms with “helper” words. Analytical tendencies in the area of numeral functioning include: substituting inflected forms of ordinal numerals with cardinal ones; the gradual disappearing inflection of numerals; confusing the forms of noun cases after numerals; the disappearing declination of collective numerals; displacing other cases with so-called simple cases; changing the syntactical position which the numeral should be inflected in; abandoning the declination of first elements of collective numerals. During the study of analytic tendencies in morphology, it was necessary to examine

  16. Ethnocentric Tendencies in the Romanian Translations of Macbeth

    Directory of Open Access Journals (Sweden)

    Marțole Daniela Maria

    2016-08-01

    Full Text Available Starting from Venuti’s binary classification of translations into ethnocentric and foreignizing this paper focuses on the factors that trigger ethnocentric attitudes in the translation of the play Macbeth in Romanian. Counterbalancing the extremely neologist tendencies at the end of the 19th century and the beginning of the 20th century, exemplified in Ștefan Băjescu’s translation, most of the 20th century translators prove an inclination towards the use of local, ethnic elements, that should revive the national culture and language, the integrity of which was threatened by foreign elements. Ion Vinea’s translation, that was the canonical Romanian version for more than half a century, is analysed in the paper as the representative of the ethnocentric camp. Apart from the spontaneous reactions that are generally ruled by the laws of language change, other factors that lead to the fostering of ethnocentric views are the communist regime’s constrictive ideology and, at the micro level, the translator’s own linguistic and cultural perception.

  17. Modelling piloted ignition of wood and plastics

    NARCIS (Netherlands)

    Blijderveen, M. van; Bramer, E.A.; Brem, G.

    2012-01-01

    To gain insight in the startup of an incinerator, this article deals with piloted ignition. A newly developed model is described to predict the piloted ignition times of wood, PMMA and PVC. The model is based on the lower flammability limit and the adiabatic flame temperature at this limit. The

  18. 14 CFR 33.69 - Ignitions system.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ignitions system. 33.69 Section 33.69 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.69 Ignitions system. Each...

  19. 14 CFR 33.37 - Ignition system.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ignition system. 33.37 Section 33.37 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Design and Construction; Reciprocating Aircraft Engines § 33.37 Ignition system...

  20. Numerical simulation of spark ignition including ionization

    NARCIS (Netherlands)

    Thiele, M; Selle, S; Riedel, U; Warnatz, J; Maas, U

    2000-01-01

    A detailed understanding of the processes associated Midi spark ignition, as a first step during combustion, is of great importance fur clean operation of spark ignition engines. In the past 10 years. a growing concern for environmental protection, including low emission of pollutants, has increased

  1. Screening of pesticides for environmental partitioning tendency.

    Science.gov (United States)

    Gramatica, Paola; Di Guardo, Antonio

    2002-06-01

    The partitioning tendency of chemicals, in this study pesticides in particular, into different environmental compartments depends mainly on the concurrent relevance of the physico-chemical properties of the chemical itself. To rank the pesticides according to their distribution tendencies in the different environmental compartments we propose a multivariate approach: the combination, by principal component analysis, of those physico-chemical properties like organic carbon partition coefficient (Koc), n-octanol/water partition coefficient (Kow), water solubility (Sw), vapour pressure and Henry's law constant (H) that are more relevant to the determination of environmental partitioning. The resultant macrovariables, the PC1 and PC2 scores here named leaching index (LIN) and volatality index (VIN), are proposed as preliminary environmental partitioning indexes in different media. These two indexes are modeled by theoretical molecular descriptors with satisfactory predictive power. Such an approach allows a rapid pre-determination and screening of the environmental distribution of pesticides starting only from the molecular structure of the pesticide, without any a priori knowledge of the physico-chemical properties.

  2. Frictional Ignition Testing of Composite Materials

    Science.gov (United States)

    Peralta, Steve; Rosales, Keisa; Robinson, Michael J.; Stoltzfus, Joel

    2006-01-01

    The space flight community has been investigating lightweight composite materials for use in propellant tanks for both liquid and gaseous oxygen for space flight vehicles. The use of these materials presents some risks pertaining to ignition and burning hazards in the presence of oxygen. Through hazard analysis process, some ignition mechanisms have been identified as being potentially credible. One of the ignition mechanisms was reciprocal friction; however, test data do not exist that could be used to clear or fail these types of materials as "oxygen compatible" for the reciprocal friction ignition mechanism. Therefore, testing was performed at White Sands Test Facility (WSTF) to provide data to evaluate this ignition mechanism. This paper presents the test system, approach, data results, and findings of the reciprocal friction testing performed on composite sample materials being considered for propellant tanks.

  3. Shock ignition: modelling and target design robustness

    Energy Technology Data Exchange (ETDEWEB)

    Ribeyre, X; Lafon, M; Schurtz, G; Olazabal-Loume, M; Breil, J; Galera, S; Weber, S, E-mail: ribeyre@celia.u-bordeaux1.f [Centre Lasers Intenses et Applications, Universite Bordeaux 1, CNRS, CEA, Universite Bordeaux 1, 351, cours de la Liberation, 33405 Talence (France)

    2009-12-15

    Shock ignition of a pre-compressed deuterium tritium fuel is considered here. When properly timed, a converging shock launched in the target prior to stagnation time strongly enhances the hot spot pressure. This allows ignition to be reached in a nonisobaric configuration. We show in this work that the igniting mechanism is pressure amplification by shock convergence and shock collision. The shock ignition applied to the HiPER target allows one to study the robustness of this method. It is shown that the spike energy is not a critical parameter and that the spike power delivered on the target depends mainly on the shell implosion velocity. Finally, a family of homothetic targets ignited with a shock wave is studied.

  4. Understanding Biomass Ignition in Power Plant Mills

    DEFF Research Database (Denmark)

    Schwarzer, Lars; Jensen, Peter Arendt; Glarborg, Peter

    2017-01-01

    % oxygen with those under inert atmosphere revealed two distinct pathways, pyrolysis and exothermic heterogeneous oxidation. At low temperatures and sufficient oxygen availability, heterogeneous oxidation of the solid seems to be favored over pyrolysis for wood, but not for coal. Current ignition models do......Converting existing coal fired power plants to biomass is a readily implemented strategy to increase the share of renewable energy. However, changing from one fuel to another is not straightforward: Experience shows that wood pellets ignite more readily than coal in power plant mills or storages....... This is not very well explained by apply-ing conventional thermal ignition theory. An experimental study at lab scale, using pinewood as an example fuel, was conducted to examine self-heating and self-ignition. Supplemental experiments were performed with bituminous coal. Instead of characterizing ignition...

  5. Direct numerical simulations of the ignition of lean primary reference fuel/air mixtures with temperature inhomogeneities

    KAUST Repository

    Luong, Minhbau

    2013-10-01

    The effects of fuel composition, thermal stratification, and turbulence on the ignition of lean homogeneous primary reference fuel (PRF)/air mixtures under the conditions of constant volume and elevated pressure are investigated by direct numerical simulations (DNSs) with a new 116-species reduced kinetic mechanism. Two-dimensional DNSs were performed in a fixed volume with a two-dimensional isotropic velocity spectrum and temperature fluctuations superimposed on the initial scalar fields with different fuel compositions to elucidate the influence of variations in the initial temperature fluctuation and turbulence intensity on the ignition of three different lean PRF/air mixtures. In general, it was found that the mean heat release rate increases slowly and the overall combustion occurs fast with increasing thermal stratification regardless of the fuel composition under elevated pressure and temperature conditions. In addition, the effect of the fuel composition on the ignition characteristics of PRF/air mixtures was found to vanish with increasing thermal stratification. Chemical explosive mode (CEM), displacement speed, and Damköhler number analyses revealed that the high degree of thermal stratification induces deflagration rather than spontaneous ignition at the reaction fronts, rendering the mean heat release rate more distributed over time subsequent to thermal runaway occurring at the highest temperature regions in the domain. These analyses also revealed that the vanishing of the fuel effect under the high degree of thermal stratification is caused by the nearly identical propagation characteristics of deflagrations of different PRF/air mixtures. It was also found that high intensity and short-timescale turbulence can effectively homogenize mixtures such that the overall ignition is apt to occur by spontaneous ignition. These results suggest that large thermal stratification leads to smooth operation of homogeneous charge compression-ignition (HCCI

  6. Depression tendency in physically active senior citizens

    Directory of Open Access Journals (Sweden)

    Adriana Coutinho de Azevedo Guimarães

    2005-06-01

    Full Text Available The present work identifies cases of depression tendency in physically active senior citizens. In our proposal, the data were collected by interviewing senior members of the Seniority Related Studies Group (GETI/CEFID-UDESC using a depression scale method that was adapted from Stoppe e Louzã (1999. To establish the data base 122 candidates with an average age of 68.8 years were included. Most of them (91% did not show any tendency to depression. On the other hand, the remaining examinees (9% presented a lack of hope for their own future, leading to an evident condition of depression tendency. Considering the complexity of the factors that are related to depression conditions, physical activities do lead to body, social and mental benefits, reducing the possibility of a depressive state in senior citizens. RESUMO O presente trabalho verificou a tendência ao estado depressivo em idosos praticantes de atividade física. Para tanto, foi realizada uma entrevista com idosos do Grupo de Estudos da Terceira Idade (GETI/CEFIDUDESC. O instrumento utilizado foi a escala de depressão adaptada de Stoppe e Louzã (1999. A análise dos resultados foi feita por meio de estatística descritiva mediante cálculo de freqüência simples e percentual. A amostra foi composta de 122 idosos, com a idade média de 68,8 anos (DP= 5,5. A maioria dos idosos (91% não apresentou tendência ao estado depressivo. Os que apresentaram tendência (9% referem não ter esperança em relação ao futuro, ter pouca energia e estar pouco animado na maior parte do tempo; apesar disto continuam estimulados a participar do programa de atividade física. Considerando a complexidade dos fatores que predispõem os estados depressivos, entende-se que a atividade física proporciona benefícios físicos, sociais e mentais, podendo reduzir a depressão no idoso.

  7. Spontaneous pneumothorax in weightlifters.

    Science.gov (United States)

    Marnejon, T; Sarac, S; Cropp, A J

    1995-06-01

    Spontaneous pneumothorax is infrequently caused by strenuous exertion. To our knowledge there has only been one case of spontaneous pneumothorax associated with weightlifting reported in the medical literature. We describe three consecutive cases of spontaneous pneumothorax associated with weightlifting. We postulate that spontaneous pneumothorax in these patients may be secondary to improper breathing techniques. It is important that physicians and weight trainers be aware of the association between weight lifting and spontaneous pneumothorax and assure that proper instruction is given to athletes who work with weights.

  8. IMMIGRATION GROWTH TENDENCIES IN OECD COUNTRIES

    Directory of Open Access Journals (Sweden)

    Imran SARIHASAN

    2016-12-01

    Full Text Available Immigration became one of the relevant economic topics in recent years. Over the centuries millions of people have migrated, despite the physical, cultural etc. obstacles, to other lands in search of better lives for themselves and their children. In the context of development, globalization and labor market mobility, it is necessary to further analyze the determinants and consequences of migration not only on the host country, but also on the sending country. The increased interest and availability of data keeps this subject in the attention of economists all over the world. In this case an increase in immigration became very significant ıssue for policymakers. The aims of this study are to describe immigration growth tendencies and to answer how much is the average growth rate of foreıgn born population. Thus, in order to measure the native and foreign-born unemployed migrants, twenty-seven OECD countries were used in this research paper.

  9. Tendencies of the digital newspapers in Peru

    Directory of Open Access Journals (Sweden)

    Dra. Lyudmyla Yezers´ka

    2008-01-01

    Full Text Available This article analyzes some of the tendencies of the development of the digital media in Peru. The results that are presented were obtained by means of a survey carried out to responsible people of the digital redactions of the national generalist newspapers that, when concluding the first decade of the existence of the online journalism in the country (1995-2005, had digital editions. From historical perspective, different stages of evolution and consolidation of the Peruvian daily editions in the Global Network have not had temporary clear definition. The media progressed at their own pace, depending among other factors –at the time of entry into the network, the staff assigned to the publication, and especially on the strength of the journalistic company and its policy regarding digital editing. With regard to the presence on the Internet, digital newspapers have shown a steady and numerous growth, over the first decade (1995-2005.

  10. Tendency toward Substance Abuse among Students

    Directory of Open Access Journals (Sweden)

    Seyed Hadi Marjaei

    2017-06-01

    Full Text Available This paper tries to study the status of tendency toward drug and alcohol abuse among university students and makes a comparison between native (from Tehran and non-native (from other parts of Iran who stay in dorms. This study is a secondary analysis which uses previous data from other grand researches that have been done among different universities in Tehran. According to the data based on these researches (Serajzade, 2002 and (Serajzade, ET, al. 2001 the eminence of native and non-native student are compared and analyzed. In this study the data is analyzed using SPSS through variety of tests such as T-test, Variation analysis, correlations and so on. The results show that among 28 indicators of different pathological problems relating to drug abuse, non-native students are more involved with drugs in 13 indicators while native students are more engage in 8 indicators and there are 7 indicators that engage both groups equally.

  11. [Developmental tendencies of hemadsorption in uremia treatment].

    Science.gov (United States)

    Falkenhagen, D; Holtz, M; Ahrenholz, P; Esther, G; Osten, B; Klinkmann, H

    1980-09-01

    After at first having dealt with the present stage of haemoperfusion in the therapy of chronic renal insufficiency, the developmental tendencies for the haemoadsorbers to be expected are mentioned which in future allow to think of a diminution of the artificial kidney. Own results concerning the behaviour of blood compatibility and the effectivity of different active charcoals show that it is to be reckoned with the further development of unstratified adsorbents or such ones with ultra-thin layer. Comparative examinations of 4 patients from the chronic haemodialytic programme, who were treated for 4 months with the CDAK 1.8 and then for 4 months with the sorbent dialyser 1.3, could not show any essential differences in the behaviour of the low-molecular substances urea, creatinine and uric acid and of the clinical condition of the patients.

  12. The effects of age and divided attention on spontaneous recognition.

    Science.gov (United States)

    Anderson, Benjamin A; Jacoby, Larry L; Thomas, Ruthann C; Balota, David A

    2011-05-01

    Studies of recognition typically involve tests in which the participant's memory for a stimulus is directly questioned. There are occasions however, in which memory occurs more spontaneously (e.g., an acquaintance seeming familiar out of context). Spontaneous recognition was investigated in a novel paradigm involving study of pictures and words followed by recognition judgments on stimuli with an old or new word superimposed over an old or new picture. Participants were instructed to make their recognition decision on either the picture or word and to ignore the distracting stimulus. Spontaneous recognition was measured as the influence of old vs. new distracters on target recognition. Across two experiments, older adults and younger adults placed under divided-attention showed a greater tendency to spontaneously recognize old distracters as compared to full-attention younger adults. The occurrence of spontaneous recognition is discussed in relation to ability to constrain retrieval to goal-relevant information.

  13. National Ignition Facility site requirements

    International Nuclear Information System (INIS)

    1996-07-01

    The Site Requirements (SR) provide bases for identification of candidate host sites for the National Ignition Facility (NIF) and for the generation of data regarding potential actual locations for the facilities. The SR supplements the NIF Functional Requirements (FR) with information needed for preparation of responses to queries for input to HQ DOE site evaluation. The queries are to include both documents and explicit requirements for the potential host site responses. The Sr includes information extracted from the NIF FR (for convenience), data based on design approaches, and needs for physical and organization infrastructure for a fully operational NIF. The FR and SR describe requirements that may require new construction or may be met by use or modification of existing facilities. The SR do not establish requirements for NIF design or construction project planning. The SR document does not constitute an element of the NIF technical baseline

  14. Modelling piloted ignition of wood and plastics.

    Science.gov (United States)

    van Blijderveen, Maarten; Bramer, Eddy A; Brem, Gerrit

    2012-09-01

    To gain insight in the startup of an incinerator, this article deals with piloted ignition. A newly developed model is described to predict the piloted ignition times of wood, PMMA and PVC. The model is based on the lower flammability limit and the adiabatic flame temperature at this limit. The incoming radiative heat flux, sample thickness and moisture content are some of the used variables. Not only the ignition time can be calculated with the model, but also the mass flux and surface temperature at ignition. The ignition times for softwoods and PMMA are mainly under-predicted. For hardwoods and PVC the predicted ignition times agree well with experimental results. Due to a significant scatter in the experimental data the mass flux and surface temperature calculated with the model are hard to validate. The model is applied on the startup of a municipal waste incineration plant. For this process a maximum allowable primary air flow is derived. When the primary air flow is above this maximum air flow, no ignition can be obtained. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Definition of Ignition in Inertial Confinement Fusion

    Science.gov (United States)

    Christopherson, A. R.; Betti, R.

    2017-10-01

    Defining ignition in inertial confinement fusion (ICF) is an unresolved problem. In ICF, a distinction must be made between the ignition of the hot spot and the propagation of the burn wave in the surrounding dense fuel. Burn propagation requires that the hot spot is robustly ignited and the dense shell exhibits enough areal density. Since most of the energy gain comes from burning the dense shell, in a scale of increasing yields, hot-spot ignition comes before high gains. Identifying this transition from hot-spot ignition to burn-wave propagation is key to defining ignition in general terms applicable to all fusion approaches that use solid DT fuel. Ad hoc definitions such as gain = 1 or doubling the temperature are not generally valid. In this work, we show that it is possible to identify the onset of ignition through a unique value of the yield amplification defined as the ratio of the fusion yield including alpha-particle deposition to the fusion yield without alphas. Since the yield amplification is a function of the fractional alpha energy fα =EαEα 2Ehs 2Ehs (a measurable quantity), it appears possible not only to define ignition but also to measure the onset of ignition by the experimental inference of the fractional alpha energy and yield amplification. This material is based upon work supported by the Department of Energy Office of Fusion Energy Services under Award Number DE-FC02-04ER54789 and National Nuclear Security Administration under Award Number DE-NA0001944.

  16. Approach to ignition of tokamak reactors

    Energy Technology Data Exchange (ETDEWEB)

    Sigmar, D.J.

    1981-02-01

    Recent transport modeling results for JET, INTOR, and ETF are reviewed and analyzed with respect to existing uncertainties in the underlying physics, the self-consistency of the very large numerical codes, and the margin for ignition. The codes show ignition to occur in ETF/INTOR-sized machines if empirical scaling can be extrapolated to ion temperatures (and beta values) much higher than those presently achieved, if there is no significant impurity accumulation over the first 7 s, and if the known ideal and resistive MHD instabilities remain controllable for the evolving plasma profiles during ignition startup.

  17. 30 CFR 35.20 - Autogenous-ignition temperature test.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Autogenous-ignition temperature test. 35.20... Autogenous-ignition temperature test. (a) Purpose. The purpose of this test, referred to hereinafter as the ignition-temperature test, is to determine the lowest autogenous-ignition temperature of a hydraulic fluid...

  18. Development status of the ignition system for Vinci

    NARCIS (Netherlands)

    Frenken, G.; Vermeulen, E.; Bouquet, F.; Sanders, H.M.

    2002-01-01

    The development status of ignition system for the new cryogenic upper stage engine Vinci is presented. The concept differs from existing upper stage ignition systems as its functioning is engine independent. The system consists of a spark torch igniter, a highpressure igniter feed system and an

  19. Preliminary results of thermal igniter experiments in H2-air-steam environments

    International Nuclear Information System (INIS)

    Lowry, W.

    1981-01-01

    Thermal igniters (glow plugs), proposed by the Tennessee Valley Authority for intentional ignition of hydrogen in nuclear reactor containment, have been tested for functionability in mixtures of air, hydrogen, and steam. Test environments included 6% to 16% hydrogen concentrations in air, and 8%, 10%, and 12% hydrogen in mixtures with 30% and 40% steam fractions. All were conducted in a 10.6 ft 3 insulated pressure vessel. For all of these tests the glow plug successfully initiated combustion. Dry air/hydrogen tests exhibited a distinct tendency for complete combustion at hydrogen concentrations between 8% and 9%. Steam suppressed both peak pressures and completeness of combustion. No combustion could be initiated at or above a 50% steam fraction. Circulation of the mixture with a fan increased the completeness of combustion. The glow plug showed no evidence of performance degradation throughout the program

  20. A comparative experimental study on engine operating on premixed charge compression ignition and compression ignition mode

    Directory of Open Access Journals (Sweden)

    Bhiogade Girish E.

    2017-01-01

    Full Text Available New combustion concepts have been recently developed with the purpose to tackle the problem of high emissions level of traditional direct injection Diesel engines. A good example is the premixed charge compression ignition combustion. A strategy in which early injection is used causing a burning process in which the fuel burns in the premixed condition. In compression ignition engines, soot (particulate matter and NOx emissions are an extremely unsolved issue. Premixed charge compression ignition is one of the most promising solutions that combine the advantages of both spark ignition and compression ignition combustion modes. It gives thermal efficiency close to the compression ignition engines and resolves the associated issues of high NOx and particulate matter, simultaneously. Premixing of air and fuel preparation is the challenging part to achieve premixed charge compression ignition combustion. In the present experimental study a diesel vaporizer is used to achieve premixed charge compression ignition combustion. A vaporized diesel fuel was mixed with the air to form premixed charge and inducted into the cylinder during the intake stroke. Low diesel volatility remains the main obstacle in preparing premixed air-fuel mixture. Exhaust gas re-circulation can be used to control the rate of heat release. The objective of this study is to reduce exhaust emission levels with maintaining thermal efficiency close to compression ignition engine.

  1. Characteristics of Syngas Auto-ignition at High Pressure and Low Temperature Conditions with Thermal Inhomogeneities

    KAUST Repository

    Pal, Pinaki

    2015-05-31

    Effects of thermal inhomogeneities on syngas auto-ignition at high-pressure low-temperature conditions, relevant to gas turbine operation, are investigated using detailed one-dimensional numerical simulations. Parametric tests are carried out for a range of thermodynamic conditions (T = 890-1100 K, P = 3-20 atm) and composition (Ф = 0.1, 0.5). Effects of global thermal gradients and localized thermal hot spots are studied. In the presence of a thermal gradient, the propagating reaction front transitions from spontaneous ignition to deflagration mode as the initial mean temperature decreases. The critical mean temperature separating the two distinct auto-ignition modes is computed using a predictive criterion and found to be consistent with front speed and Damkohler number analyses. The hot spot study reveals that compression heating of end-gas mixture by the propagating front is more pronounced at lower mean temperatures, significantly advancing the ignition delay. Moreover, the compression heating effect is dependent on the domain size.

  2. Laser ignition of aluminum nanoparticles in air

    Energy Technology Data Exchange (ETDEWEB)

    Sandstrom, M. M. (Mary M.); Oschwald, D. M. (David M); Son, S. F. (Steven F.)

    2004-01-01

    This paper reports on recent experiments of the ignition of nanoaluminum in air by CO{sub 2} laser heating. Ignition time and temperature were measured as a function of Al particle size and laser power. The ignition time was determined by high-speed digital images and frrst light as determined by a photodiode. The ignition delay increases with increasing particle size, and the decreasing laser power. Two stage burning is observed. The first reaction takes place on the surface of the powder sample and moves from the center to the edges followed by the second reaction, which takes place within the bulk of the sample. As the particles size increases the material is less likely to burn through out, leaving behind unreacted Al powder.

  3. Compact Microtube Igniter for Methane Rockets

    Data.gov (United States)

    National Aeronautics and Space Administration — This project seeks to facilitate the Evolvable Mars Campaign (EMC) LOX/Methane Propulsion Architecture by developing a reliable, compact, low power methane igniter....

  4. Plasma igniter for internal-combustion engines

    Science.gov (United States)

    Breshears, R. R.; Fitzgerald, D. J.

    1978-01-01

    Hot ionized gas (plasma) ignites air/fuel mixture in internal combustion engines more effectively than spark. Electromagnetic forces propel plasma into combustion zone. Combustion rate is not limited by flame-front speed.

  5. The National Ignition Facility Project. Revision 1

    International Nuclear Information System (INIS)

    Paisner, J.A.; Campbell, E.M.; Hogan, W.J.

    1994-01-01

    The mission of the National Ignition Facility is to achieve ignition and gain in inertial confinement fusion targets in the laboratory. The facility will be used for defense applications such as weapons physics and weapons effects testing, and for civilian applications such as fusion energy development and fundamental studies of matter at high temperatures and densities. This paper reviews the design, schedule, and costs associated with the construction project

  6. Computational Studies and Designs for Fast Ignition

    Science.gov (United States)

    Nagatomo, H.; Johzaki, T.; Nakamura, T.; Sakagami, H.; Mima, K.

    2006-12-01

    The fast ignition scheme is one of the most fascinating and feasible ignition schemes for the inertial fusion energy. At ILE Osaka University, FIREX (Fast Ignition Realization Experiment) project is in progress. Implosion experiments of the cryogenic target are scheduled in near future. There are two key issues for the fast ignition. One is controlling the implosion dynamics to form high density core plasma in non-spherical implosion, and the other is heating the core plasma efficiently by the short pulse high intense laser. The time and space scale in the fast ignition scheme vary widely from initial laser irradiation to solid target, to relativistic laser plasma interaction and final fusion burning. The numerical simulation plays an important role in demonstrating the performance of the fast ignition, designing the targets, and optimizing laser pulse shapes for the scheme. These all the physics are desired to be self-consistently described. In order to study these physics of FI, we have developed "Fast Ignition Integrated Interconnecting code" (FI3), which consists of collective Particle-in-Cell (PIC) code (FISCOF1D/2D), Relativistic Fokker-Planck with hydro code (FIBMET), and 2-dimensional Arbitrary-Lagrangian-Eulerian (ALE) radiation hydrodynamics code (PINOCO). Those codes are sophisticated in each suitable plasma parameters, and boundaries conditions and initial conditions for them are imported/exported to each other by way of DCCP, a simple and compact communication tool which enable these codes to communicate each others under executing different machines. We show the feature of the FI3 code, and numerical results of whole process of fast ignition. Individual important physics behind the FI are explained with the numerical results also.

  7. Confinement scaling and ignition in tokamaks

    International Nuclear Information System (INIS)

    Perkins, F.W.; Sun, Y.C.

    1985-10-01

    A drift wave turbulence model is used to compute the scaling and magnitude of central electron temperature and confinement time of tokamak plasmas. The results are in accord with experiment. Application to ignition experiments shows that high density (1 to 2) . 10 15 cm -3 , high field, B/sub T/ > 10 T, but low temperature T approx. 6 keV constitute the optimum path to ignition

  8. Dynamic Regime of Ignition of Solid Propellant

    Directory of Open Access Journals (Sweden)

    Zolotorev Nikolay

    2016-01-01

    Full Text Available This article presents a dynamic regime of exposure of the radiant flux on the sample of gun-cotton. Obtained time the ignition of gun-cotton in the heating conditions of increasing heat flux in the range from 0.2 W/cm2 to 22 W/cm2. A comparison of the delay times of the ignition when heated variable and constant heat flux.

  9. Physics parameter space of tokamak ignition devices

    International Nuclear Information System (INIS)

    Selcow, E.C.; Peng, Y.K.M.; Uckan, N.A.; Houlberg, W.A.

    1985-01-01

    This paper describes the results of a study to explore the physics parameter space of tokamak ignition experiments. A new physics systems code has been developed to perform the study. This code performs a global plasma analysis using steady-state, two-fluid, energy-transport models. In this paper, we discuss the models used in the code and their application to the analysis of compact ignition experiments. 8 refs., 8 figs., 1 tab

  10. Concept of a Helias ignition experiment

    Science.gov (United States)

    Wobig, H.; Andreeva, T.; Beidler, C. D.; Harmeyer, E.; Herrnegger, F.; Igitkhanov, Y.; Kisslinger, J.; Kolesnichenko, Ya. I.; Lutsenko, V. V.; Marchenko, V. S.; Nührenberg, C.; Sidorenko, I.; Turkin, Y.; Wieczorek, A.; Yakovenko, Yu. V.

    2003-09-01

    The Helias ignition experiment is an upgraded version of the Wendelstein 7-X experiment. The magnetic configuration is a four-period Helias configuration (major radius 18 m, plasma radius 2.0 m, B = 4.5 T), which presents a more compact option than the five-period configuration. Much effort has been focused on two versions of the four-period configuration. One option is the power reactor HSR4/18 providing at least 3 GW of fusion power and the second is the ignition experiment HSR 4/18i aiming at a minimum of fusion power and the demonstration of self-sustaining burn. The design criteria of the ignition experiment HSR 4/18i are the following: The experiment should demonstrate a safe and reliable route to ignition; self-sustained burn without external heating; steady-state operation during several hundred seconds; reliability of the technical components and tritium breeding in a test blanket. The paper discusses the technical issues of the coil system and describes the vacuum vessel and the shielding blanket. The power balance will be modelled with a transport code and the ignition conditions will be investigated using current scaling laws of energy confinement in stellarators. The plasma parameters of the ignition experiment are: peak density 2-3×1020 m-3, peak temperature 11-15 keV, average beta 3.6% and fusion power 1500-1700 MW.

  11. Tokamak two-fluid ignition conditions

    Science.gov (United States)

    Guazzotto, L.; Betti, R.

    2017-08-01

    This work focuses on modeling the properties needed by a plasma to reach ignition, where ignition is the condition in which fusion power is produced at the steady state without any external input power. We extend the classic work by Lawson giving the ptotτE (product between density, temperature, and energy confinement time) needed for ignition [J. D. Lawson, Proc. Phys. Soc. London, Sect. B 70, 6 (1957)] by improving the original zero-dimensional, single fluid model. The effect of multi-fluid physics is included, by distinguishing ions, electrons, and α particles. The effects of one-dimensional density and temperature profiles are also considered. It is found that the multi-fluid model predicts a larger Lawson product required for ignition than the single-fluid one. A detailed analysis of the energy confinement times for each species and energy equilibration times between species shows that the electron energy confinement time is the parameter more strongly affecting the Lawson product needed for ignition. It is also found that peaked profiles (of either temperature or density) require a smaller Lawson product for ignition than flat profiles.

  12. Does charge transfer correlate with ignition probability?

    International Nuclear Information System (INIS)

    Holdstock, Paul

    2008-01-01

    Flammable or explosive atmospheres exist in many industrial environments. The risk of ignition caused by electrostatic discharges is very real and there has been extensive study of the incendiary nature of sparks and brush discharges. It is clear that in order to ignite a gas, an amount of energy needs to be delivered to a certain volume of gas within a comparatively short time. It is difficult to measure the energy released in an electrostatic discharge directly, but it is possible to approximate the energy in a spark generated from a well defined electrical circuit. The spark energy required to ignite a gas, vapour or dust cloud can be determined by passing such sparks through them. There is a relationship between energy and charge in a capacitive circuit and so it is possible to predict whether or not a spark discharge will cause an ignition by measuring the charge transferred in the spark. Brush discharges are in many ways less well defined than sparks. Nevertheless, some work has been done that has established a relationship between charge transferred in brush discharges and the probability of igniting a flammable atmosphere. The question posed by this paper concerns whether such a relationship holds true in all circumstances and if there is a universal correlation between charge transfer and ignition probability. Data is presented on discharges from textile materials that go some way to answering this question.

  13. EXPERIMENTAL STUDY OF MINIMUM IGNITION TEMPERATURE

    Directory of Open Access Journals (Sweden)

    Igor WACHTER

    2015-12-01

    Full Text Available The aim of this scientific paper is an analysis of the minimum ignition temperature of dust layer and the minimum ignition temperatures of dust clouds. It could be used to identify the threats in industrial production and civil engineering, on which a layer of combustible dust could occure. Research was performed on spent coffee grounds. Tests were performed according to EN 50281-2-1:2002 Methods for determining the minimum ignition temperatures of dust (Method A. Objective of method A is to determine the minimum temperature at which ignition or decomposition of dust occurs during thermal straining on a hot plate at a constant temperature. The highest minimum smouldering and carbonating temperature of spent coffee grounds for 5 mm high layer was determined at the interval from 280 °C to 310 °C during 600 seconds. Method B is used to determine the minimum ignition temperature of a dust cloud. Minimum ignition temperature of studied dust was determined to 470 °C (air pressure – 50 kPa, sample weight 0.3 g.

  14. Hundred years of car engines - development tendencies in the past and future

    Energy Technology Data Exchange (ETDEWEB)

    Jungbluth, G.

    1986-06-01

    A general review of the tendencies in the development of vehicle engines in the past and present, dealing with only those developments which have had a permanent effect lasting into the present. The earliest development began 10 years after the first four-stroke (Otto) engine suitable for commercial use had been realised in 1876. In 1892, Maybach created the first gas mixture formation system with his 'spray jet carburettor'. In 1902, high-tension magnetic ignition was invented. Starting from these first developments, the author goes into some of the thermodynamic basics (p-V-diagram, constant volume combustion, efficiency) and into some past development tendencies (higher engine performance, more favourable weight: Performance, reduction of fuel consumption; reliability of engines, extension of service life). Development in the present and immediate future is dominated by environmental pollution reduction (catalytic converter) and the increased use of the supercharger principle. The gas turbine is viewed as the only competition for the internal combustion engine. Its use in vehicles requires as a condition, however, gas intake temperatures as high as 1300/sup 0/C (use of ceramic components). (HWJ).

  15. Main tendencies meeting future energy demands

    International Nuclear Information System (INIS)

    Flach, G.; Riesner, W.; Ufer, D.

    1989-09-01

    The economic development in the German Democratic Republic within the preceding 10 years has proved that future stable economic growth of about 4 to 4.5% per annum is only achievable by ways including methods of saving resources. This requires due to the close interdependences between the social development and the level of the development in the energy sector long-term growth rates of the national income of 4 to 4.5% per annum at primary energy growth rates of less than 1% per annum. It comprises three main tendencies: 1. Organization of a system with scientific-technical, technological, economic structural-political and educational measures ensuring in the long term less increase of the energy demand while keeping the economic growth at a constant level. 2. The long-term moderate extension and modernization of the GDR's energy basis is characterized by continuing use of the indigenous brown coal resources for the existing power plant capacities and for district heating. 3. The use of modern and safe nuclear power technologies defines a new and in future more and more important element of the energy basis. Currently about 10% of electricity in the GDR are covered by nuclear energy, in 2000 it will be one third, after 2000 the growth process will continue. The experience shows: If conditions of deepened scientific consideration of all technological processes and the use of modern diagnosis and computer technologies as well as permanent improvement of the safety-technological components and equipment are guaranteed an increasing use of such systems for the production of electricity and heat is socially acceptable. Ensuring a high level of education and technical training of everyone employed in the nuclear energy industry, strict safety restrictions and independent governmental control of these restrictions are important preconditions for the further development in this field. 3 refs, 5 tabs

  16. Spontaneous uterine rupture

    African Journals Online (AJOL)

    ABSTRACT. Rupture of a gravid uterus is a surgical emergency. Predisposing factors include a scarred uterus. Spontaneous rupture of an unscarred uterus during pregnancy is a rare occurrence. We hereby present the case of a spontaneous complete uterine rupture at a gestational age of 34 weeks in a 35 year old patient ...

  17. Spontaneous intracranial hypotension.

    LENUS (Irish Health Repository)

    Fullam, L

    2012-01-31

    INTRODUCTION: Spontaneous\\/primary intracranial hypotension is characterised by orthostatic headache and is associated with characteristic magnetic resonance imaging findings. CASE REPORT: We present a case report of a patient with typical symptoms and classical radiological images. DISCUSSION: Spontaneous intracranial hypotension is an under-recognised cause of headache and can be diagnosed by history of typical orthostatic headache and findings on MRI brain.

  18. Ignition delay times of Gasoline Distillation Cuts measured with Ignition Quality Tester

    KAUST Repository

    Naser, Nimal

    2017-04-21

    Tailoring fuel properties to maximize the efficiency of internal combustion engines is a way towards achieving cleaner combustion systems. In this work, the ignition properties of various gasoline fuel distillation cuts are analyzed to better understand fuel properties of the full boiling range fuel. An advanced distillation column (ADC) provides a more realistic representation of volatility characteristics, which can be modeled using equilibrium thermodynamic methods. The temperature reported is that of the liquid, as opposed to the vapor temperature in conventional ASTM D86 distillation standard. Various FACE (fuels for advanced combustion engines) gasolines were distilled and various cuts were obtained. The separated fractions were then tested in an ignition quality tester (IQT) to see the effect of chemical composition of different fractions on their ignition delay time. Fuels with lower aromatic content showed decreasing ignition delay time with increasing boiling point (i.e., molecular weight). However, fuels with higher aromatic content showed an initial decrease in ignition delay time with increasing boiling point, followed by drastic increase in ignition delay time due to fractions containing aromatics. This study also provides an understanding on contribution of different fractions to the ignition delay time of the fuel, which provides insights into fuel stratification utilized in gasoline compression ignition (GCI) engines to tailor heat release rates.

  19. Aerospace Laser Ignition/Ablation Variable High Precision Thruster

    Science.gov (United States)

    Campbell, Jonathan W. (Inventor); Edwards, David L. (Inventor); Campbell, Jason J. (Inventor)

    2015-01-01

    A laser ignition/ablation propulsion system that captures the advantages of both liquid and solid propulsion. A reel system is used to move a propellant tape containing a plurality of propellant material targets through an ignition chamber. When a propellant target is in the ignition chamber, a laser beam from a laser positioned above the ignition chamber strikes the propellant target, igniting the propellant material and resulting in a thrust impulse. The propellant tape is advanced, carrying another propellant target into the ignition chamber. The propellant tape and ignition chamber are designed to ensure that each ignition event is isolated from the remaining propellant targets. Thrust and specific impulse may by precisely controlled by varying the synchronized propellant tape/laser speed. The laser ignition/ablation propulsion system may be scaled for use in small and large applications.

  20. Ignition parameters and early flame kernel development of laser-ignited combustible gas mixtures

    International Nuclear Information System (INIS)

    Kopecek, H.; Wintner, E.; Ruedisser, D.; Iskra, K.; Neger, T.

    2002-01-01

    Full text: Laser induced breakdown of focused pulsed laser radiation, the subsequent plasma formation and thermalization offers a possibility of ignition of combustible gas mixtures free from electrode interferences, an arbitrary choice of the location within the medium and exact timing regardless of the degree of turbulence. The development and the decreasing costs of solid state laser technologies approach the pay-off for the higher complexity of such an ignition system due to several features unique to laser ignition. The feasability of laser ignition was demonstrated in an 1.5 MW(?) natural gas engine, and several investigations were performed to determine optimal ignition energies, focus shapes and laser wavelengths. The early flame kernel development was investigated by time resolved planar laser induced fluorescence of the OH-radical which occurs predominantly in the flame front. The flame front propagation showed typical features like toroidal initial flame development, flame front return and highly increased flame speed along the laser focus axis. (author)

  1. Advances in Modeling Direct-Drive Ignition at the National Ignition Facility

    Science.gov (United States)

    Collins, T. J. B.; Marozas, J. A.

    2017-10-01

    Polar direct drive (PDD) makes it possible to perform direct-drive-ignition experiments at the National Ignition Facility (NIF) while the facility is configured for indirect drive. We present for the first time PDD ignition-relevant target designs with decreased laser intensities. These designs include the physical effects of cross-beam energy transfer (CBET) and nonlocal heat transport, both of which substantially affect the target drive. In the PDD configuration, a multiwavelength detuning strategy was found to be effective in mitigating the loss of coupling caused by CBET, allowing for implosion speeds comparable to those of previous designs. Target designs will be presented that span the region from alpha-particle heating to ignition. In addition, ignition-relevant designs will also be discussed for use in symmetric direct drive on the NIF. This material is based upon work supported by the Department of Energy National Nuclear Security Administration under Award Number DE-NA0001944.

  2. The Effect of Pore Volume of Hard Coals on Their Susceptibility to Spontaneous Combustion

    Directory of Open Access Journals (Sweden)

    Agnieszka Dudzińska

    2014-01-01

    Full Text Available In this paper the results of the experimental studies on a relationship between pore volume of hard coals and their tendency to spontaneous combustion are presented. Pore volumes were determined by the gas adsorption method and spontaneous combustion tendencies of coals were evaluated by determination of the spontaneous combustion indexes Sza and Sza′ on the basis of the current Polish standards. An increase in the spontaneous combustion susceptibility of coal occurs in the case of the rise both in micropore volumes and in macropore surfaces. Porosity of coal strongly affects the possibility of oxygen diffusion into the micropores of coal located inside its porous structure. The volume of coal micropores determined on the basis of the carbon dioxide adsorption isotherms can serve as an indicator of a susceptibility of coal to spontaneous combustion.

  3. 3rd Conference on Ignition Systems for Gasoline Engines

    CERN Document Server

    Sens, Marc

    2017-01-01

    The volume includes selected and reviewed papers from the 3rd Conference on Ignition Systems for Gasoline Engines in Berlin in November 2016. Experts from industry and universities discuss in their papers the challenges to ignition systems in providing reliable, precise ignition in the light of a wide spread in mixture quality, high exhaust gas recirculation rates and high cylinder pressures. Classic spark plug ignition as well as alternative ignition systems are assessed, the ignition system being one of the key technologies to further optimizing the gasoline engine.

  4. Ion beam heating for fast ignition

    International Nuclear Information System (INIS)

    Gus'kov, S.Yu.; Limpouch, J.; Klimo, O.

    2010-01-01

    Complete text of publication follows. The characteristics features of the formation of the spatial distribution of the energy transferred to the plasma from a beam of ions with different initial energies, masses and charges under fast ignition conditions are determined. The motion of the Bragg peak is extended with respect to the spatial distribution of the temperature of the ion-beam-heated medium. The parameters of the ion beams are determined to initiate different regimes of fast ignition of thermonuclear fuel precompressed to a density of 300-500 g/cm 3 - the edge regime, in which the ignition region is formed at the outer boundary of the fuel, and the internal regime, in which the ignition region is formed in central parts of the fuel. The conclusion on the requirements for fast ignition by light and heavy ion beams is presented. It is shown that the edge heating with negative temperature gradient is described by a self-similar solution. Such a temperature distribution is the reason of the fact that the ignited beam energy at the edge heating is larger than the minimal ignition energy by factor 1.65. The temperature Bragg peak may be produced by ion beam heating in the reactor scale targets with pR-parameter larger than 3-4 g/cm 2 . In particular, for central ignition of the targets with pR-parameters in the range of 4-8 g/cm 2 the ion beam energy should be, respectively, from 5 to 7 times larger than the minimal ignition energy. The work by S.Ye. Gus'kov, D.V. Il'in, and V.E. Sherman was supported by the Ministry of Education and Science of the Russian Federation under the program 'Development of the Scientific Potential of High Education for 2009-2010' (project no. 2.1.1/1505) and the Russian Foundation for Basic Research (project no. 08-02-01394 a ). The work by J. Limpouch and O. Klimo was supported by the Czech Ministry of Education (project no. LC528, MSM6840770022).

  5. A hydrocode study of explosive shock ignition

    Science.gov (United States)

    Butler, George; Horie, Yasuyuki

    2011-06-01

    This paper discusses the results of hydrocode simulations of shock-induced ignition of PBXN-109, Octol, and PETN, using the History Variable Reactive Burn model in the CTH hydrocode. The simulations began with small-scale sympathetic detonation experiments, from which normalized values of pressure and time were derived and used to define an upper bound for ignition. This upper bound corresponds to the well established Pop-plot data for supported detonation, i . e . detonations in which a constant shock pressure is applied to an explosive until full detonation is achieved. Subsequently, one-dimensional flyer-plate simulations were conducted where the response of constant-amplitude, limited-duration shock pulses into semi-infinite explosive samples was examined. These simulations confirmed not only the existence of an upper bound for ignition as expected, but also showed ignition by ``lower level'' shocks, in which full detonation is reached at a time longer than the input shock duration. These lower-level shocks can be used to define a distinct minimal ignition threshold, below which shock pulses do not result in detonation. Numerical experiments using these bounds offer a new framework for interpreting explosive initiation data.

  6. Low power arcjet thruster pulse ignition

    Science.gov (United States)

    Sarmiento, Charles J.; Gruber, Robert P.

    1987-01-01

    An investigation of the pulse ignition characteristics of a 1 kW class arcjet using an inductive energy storage pulse generator with a pulse width modulated power converter identified several thruster and pulse generator parameters that influence breakdown voltage including pulse generator rate of voltage rise. This work was conducted with an arcjet tested on hydrogen-nitrogen gas mixtures to simulate fully decomposed hydrazine. Over all ranges of thruster and pulser parameters investigated, the mean breakdown voltages varied from 1.4 to 2.7 kV. Ignition tests at elevated thruster temperatures under certain conditions revealed occasional breakdowns to thruster voltages higher than the power converter output voltage. These post breakdown discharges sometimes failed to transition to the lower voltage arc discharge mode and the thruster would not ignite. Under the same conditions, a transition to the arc mode would occur for a subsequent pulse and the thruster would ignite. An automated 11 600 cycle starting and transition to steady state test demonstrated ignition on the first pulse and required application of a second pulse only two times to initiate breakdown.

  7. Dark Matter Ignition of Type Ia Supernovae.

    Science.gov (United States)

    Bramante, Joseph

    2015-10-02

    Recent studies of low redshift type Ia supernovae (SN Ia) indicate that half explode from less than Chandrasekhar mass white dwarfs, implying ignition must proceed from something besides the canonical criticality of Chandrasekhar mass SN Ia progenitors. We show that 1-100 PeV mass asymmetric dark matter, with imminently detectable nucleon scattering interactions, can accumulate to the point of self-gravitation in a white dwarf and collapse, shedding gravitational potential energy by scattering off nuclei, thereby heating the white dwarf and igniting the flame front that precedes SN Ia. We combine data on SN Ia masses with data on the ages of SN Ia-adjacent stars. This combination reveals a 2.8σ inverse correlation between SN Ia masses and ignition ages, which could result from increased capture of dark matter in 1.4 vs 1.1 solar mass white dwarfs. Future studies of SN Ia in galactic centers will provide additional tests of dark-matter-induced type Ia ignition. Remarkably, both bosonic and fermionic SN Ia-igniting dark matter also resolve the missing pulsar problem by forming black holes in ≳10  Myr old pulsars at the center of the Milky Way.

  8. Cognitive reactivity to success and failure relate uniquely to manic and depression tendencies and combine in bipolar tendencies.

    Science.gov (United States)

    Raes, Filip; Ghesquière, Ine; Van Gucht, Dinska

    2012-01-01

    The present study examined simultaneously the relations between cognitive reactivity to success and failure, on the one hand, and depression, manic, and bipolar tendencies, on the other hand. Participants (161 students) completed measures of success and failure reactivity, current manic and depressive symptoms, and tendencies towards depression, mania, and bipolarity. Results showed that respondents with a greater tendency towards depression evidenced greater (negative) reactivity to failure, whereas those with a greater tendency toward mania evidenced greater (positive) reactivity to success. Depression vulnerability was unrelated to success reactivity, and manic vulnerability was unrelated to failure reactivity. Tendencies toward bipolarity correlated significantly with both failure and success reactivity in a negative and positive manner, respectively. These findings add to the growing body of literature, suggesting that different features or cognitive tendencies are related to depression vulnerability versus manic vulnerability and imply that these "mirrored" cognitive features both form part of vulnerability to bipolar disorder.

  9. Cognitive Reactivity to Success and Failure Relate Uniquely to Manic and Depression Tendencies and Combine in Bipolar Tendencies

    Directory of Open Access Journals (Sweden)

    Filip Raes

    2012-01-01

    Full Text Available The present study examined simultaneously the relations between cognitive reactivity to success and failure, on the one hand, and depression, manic, and bipolar tendencies, on the other hand. Participants (161 students completed measures of success and failure reactivity, current manic and depressive symptoms, and tendencies towards depression, mania, and bipolarity. Results showed that respondents with a greater tendency towards depression evidenced greater (negative reactivity to failure, whereas those with a greater tendency toward mania evidenced greater (positive reactivity to success. Depression vulnerability was unrelated to success reactivity, and manic vulnerability was unrelated to failure reactivity. Tendencies toward bipolarity correlated significantly with both failure and success reactivity in a negative and positive manner, respectively. These findings add to the growing body of literature, suggesting that different features or cognitive tendencies are related to depression vulnerability versus manic vulnerability and imply that these “mirrored” cognitive features both form part of vulnerability to bipolar disorder.

  10. Thermonuclear microdetonation macron accelerator for impact ignition

    Science.gov (United States)

    Winterberg, F.

    2008-03-01

    It is proposed to replace the expensive ~150 kJ petawatt laser as a means for the fast ignition of a highly compressed dense DT target by a small flyer plate propelled to high velocities by a thermonuclear microdetonation ignited at one end of a super-pinch. It appears that this can most efficiently be done with the previously proposed modification of the dense plasma focus device, adding a high voltage relativistic electron beam emitting diode inside the coaxial plasma focus discharge tube, igniting at the end of the plasma focus pinch column a thermonuclear detonation wave, propagating in the axial direction and accelerating at the end of the pinch a flyer plate to a velocity of 103 km s-1.

  11. The National Ignition Facility and Industry

    Science.gov (United States)

    Harri, J. G.; Paisner, J. A.; Lowdermilk, W. H.; Boyes, J. D.; Kumpan, S. A.; Sorem, M. S.

    1994-09-01

    The mission of the National Ignition Facility is to achieve ignition and gain in inertial confinement fusion targets in the laboratory. The facility will be used for defense applications such as weapons physics and weapons effects testing, and for civilian applications such as fusion energy development and fundamental studies of matter at high temperatures and densities. The National Ignition Facility construction project will require the best of our construction industries and its success will depend on the best products offered by hundreds of the nation's high technology companies. Three-fourths of the construction costs will be invested in industry. This article reviews the design, cost and schedule, and required industrial involvement associated with the construction project.

  12. The National Ignition Facility and industry

    International Nuclear Information System (INIS)

    Harri, J.G.; Lowdermilk, W.H.; Paisner, J.A.; Boyes, J.D.; Kumpan, S.A.; Sorem, M.S.

    1994-01-01

    The mission of the National Ignition Facility is to achieve ignition and gain in inertial confinement fusion targets in the laboratory. The facility will be used for defense applications such as weapons physics and weapons effects testing, and for civilian applications such as fusion energy development and fundamental studies of matter at high temperatures and densities. The National Ignition Facility construction project will require the best of national construction industries and its success will depend on the best products offered by hundreds of the nation's high technology companies. Three-fourths of the construction costs will be invested in industry. This article reviews the design, cost and schedule, and required industrial involvement associated with the construction project

  13. Ignition device for an internal combustion engine

    Energy Technology Data Exchange (ETDEWEB)

    Tokura, N.; Kawa, H.; Goto, M.; Morino, S.; Soumiya, M.

    1987-10-27

    An ignition device for an internal combustion engine is described comprising: a direct current power source providing a direct current voltage; an ignition coil having first, second and third primary coils and a secondary coil; a first switching element forming a first closed circuit together with the direct current power source and the first primary coil; a second switching element forming a second closed circuit together with the direct current power source and the second primary coil; a reverse current-flow preventive element defining a current-flow direction in one direction in the first and second closed circuits; current detection elements for detecting current-flow in the first and second closed circuits; a third switching element forming a third closed circuit together with the direct current power source and the first and third primary coils; an ignition command signals and a control circuit for causing the first and second switching elements to push-pull operate.

  14. Progress on LMJ targets for ignition

    International Nuclear Information System (INIS)

    Cherfils-Clerouin, C; Boniface, C; Bonnefille, M; Dattolo, E; Galmiche, D; Gauthier, P; Giorla, J; Laffite, S; Liberatore, S; Loiseau, P; Malinie, G; Masse, L; Masson-Laborde, P E; Monteil, M C; Poggi, F; Seytor, P; Wagon, F; Willien, J L

    2009-01-01

    Targets designed to produce ignition on the Laser Megajoule (LMJ) are being simulated in order to set specifications for target fabrication. The LMJ experimental plans include the attempt of ignition and burn of an ICF capsule with 160 laser beams, delivering up to 1.4 MJ and 380 TW. New targets needing reduced laser energy with only a small decrease in robustness have then been designed for this purpose. Working specifically on the coupling efficiency parameter, i.e. the ratio of the energy absorbed by the capsule to the laser energy, has led to the design of a rugby-ball shaped cocktail hohlraum; with these improvements, a target based on the 240-beam A1040 capsule can be included in the 160-beam laser energy-power space. Robustness evaluations of these different targets shed light on critical points for ignition, which can trade off by tightening some specifications or by preliminary experimental and numerical tuning experiments.

  15. Progress on LMJ targets for ignition

    International Nuclear Information System (INIS)

    Cherfils-Clerouin, C; Boniface, C; Bonnefille, M; Fremerye, P; Galmiche, D; Gauthier, P; Giorla, J; Lambert, F; Laffite, S; Liberatore, S; Loiseau, P; Malinie, G; Masse, L; Masson-Laborde, P E; Monteil, M C; Poggi, F; Seytor, P; Wagon, F; Willien, J L

    2010-01-01

    Targets designed to produce ignition on the Laser MegaJoule are presented. The LMJ experimental plans include the attempt of ignition and burn of an ICF capsule with 160 laser beams, delivering up to 1.4MJ and 380TW. New targets needing reduced laser energy with only a small decrease in robustness have then been designed for this purpose. Working specifically on the coupling efficiency parameter, i.e. the ratio of the energy absorbed by the capsule to the laser energy, has led to the design of a rugby-shaped cocktail hohlraum. 1D and 2D robustness evaluations of these different targets shed light on critical points for ignition, that can be traded off by tightening some specifications or by preliminary experimental and numerical tuning experiments.

  16. Progress on LMJ targets for ignition

    Energy Technology Data Exchange (ETDEWEB)

    Cherfils-Clerouin, C; Boniface, C; Bonnefille, M; Dattolo, E; Galmiche, D; Gauthier, P; Giorla, J; Laffite, S; Liberatore, S; Loiseau, P; Malinie, G; Masse, L; Masson-Laborde, P E; Monteil, M C; Poggi, F; Seytor, P; Wagon, F; Willien, J L, E-mail: catherine.cherfils@cea.f [CEA, DAM, DIF, F-91297 Arpajon (France)

    2009-12-15

    Targets designed to produce ignition on the Laser Megajoule (LMJ) are being simulated in order to set specifications for target fabrication. The LMJ experimental plans include the attempt of ignition and burn of an ICF capsule with 160 laser beams, delivering up to 1.4 MJ and 380 TW. New targets needing reduced laser energy with only a small decrease in robustness have then been designed for this purpose. Working specifically on the coupling efficiency parameter, i.e. the ratio of the energy absorbed by the capsule to the laser energy, has led to the design of a rugby-ball shaped cocktail hohlraum; with these improvements, a target based on the 240-beam A1040 capsule can be included in the 160-beam laser energy-power space. Robustness evaluations of these different targets shed light on critical points for ignition, which can trade off by tightening some specifications or by preliminary experimental and numerical tuning experiments.

  17. Progress on LMJ targets for ignition

    Energy Technology Data Exchange (ETDEWEB)

    Cherfils-Clerouin, C; Boniface, C; Bonnefille, M; Fremerye, P; Galmiche, D; Gauthier, P; Giorla, J; Lambert, F; Laffite, S; Liberatore, S; Loiseau, P; Malinie, G; Masse, L; Masson-Laborde, P E; Monteil, M C; Poggi, F; Seytor, P; Wagon, F; Willien, J L, E-mail: catherine.cherfils@cea.f [CEA, DAM, DIF, F-91297 Arpajon (France)

    2010-08-01

    Targets designed to produce ignition on the Laser MegaJoule are presented. The LMJ experimental plans include the attempt of ignition and burn of an ICF capsule with 160 laser beams, delivering up to 1.4MJ and 380TW. New targets needing reduced laser energy with only a small decrease in robustness have then been designed for this purpose. Working specifically on the coupling efficiency parameter, i.e. the ratio of the energy absorbed by the capsule to the laser energy, has led to the design of a rugby-shaped cocktail hohlraum. 1D and 2D robustness evaluations of these different targets shed light on critical points for ignition, that can be traded off by tightening some specifications or by preliminary experimental and numerical tuning experiments.

  18. Target Visualization at the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Potter, Daniel Abraham [Univ. of California, Davis, CA (United States)

    2011-01-01

    As the National Ignition Facility continues its campaign to achieve ignition, new methods and tools will be required to measure the quality of the targets used to achieve this goal. Techniques have been developed to measure target surface features using a phase-shifting diffraction interferometer and Leica Microsystems confocal microscope. Using these techniques we are able to produce a detailed view of the shell surface, which in turn allows us to refine target manufacturing and cleaning processes. However, the volume of data produced limits the methods by which this data can be effectively viewed by a user. This paper introduces an image-based visualization system for data exploration of target shells at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory. It aims to combine multiple image sets into a single visualization to provide a method of navigating the data in ways that are not possible with existing tools.

  19. Improving the ignition quality of fuels

    KAUST Repository

    Sarathy, Mani

    2017-06-08

    Provided herein are compounds and methods of producing compounds for improving ignition quality and combustion efficiency of fuels, for example fossil fuels. In various aspects we generate highly oxygenated compounds from hydrocarbon feedstocks. The feedstock can be a branched alkane or n-alkane having a chain length greater than or equal to 6, a cycloalkane with a 5 or 6 membered ring structure, or a alkylated cycloalkane with 5 or more carbon atoms. The reactant can be fed in the gas- phase to a partial oxidation reactor (with or without a catalyst), and at a fixed temperature, mixture composition, and residence time. The reactant can be converted to a mixture of products including keto hydroperoxides, diketo hydroperoxides, keto dihydroperoxides, hydroperoxyl cyclic ethers, and alkenyl hydroperoxides. The compounds are inherently unstable and can quickly decompose to highly reactive radical species that can be used to improve the ignition quality of a fuel and advance ignition in an engine.

  20. Laser ignited engines: progress, challenges and prospects.

    Science.gov (United States)

    Dearden, Geoff; Shenton, Tom

    2013-11-04

    Laser ignition (LI) has been shown to offer many potential benefits compared to spark ignition (SI) for improving the performance of internal combustion (IC) engines. This paper outlines progress made in recent research on laser ignited IC engines, discusses the potential advantages and control opportunities and considers the challenges faced and prospects for its future implementation. An experimental research effort has been underway at the University of Liverpool (UoL) to extend the stratified speed/load operating region of the gasoline direct injection (GDI) engine through LI research, for which an overview of some of the approaches, testing and results to date are presented. These indicate how LI can be used to improve control of the engine for: leaner operation, reductions in emissions, lower idle speed and improved combustion stability.

  1. Modeling study of the anti-knock tendency of substituted phenols as additives: an application of the reaction mechanism generator (RMG).

    Science.gov (United States)

    Zhang, Peng; Yee, Nathan W; Filip, Sorin V; Hetrick, Casey E; Yang, Bin; Green, William H

    2018-01-10

    This work presents kinetic modeling efforts to evaluate the anti-knock tendency of several substituted phenols if used as gasoline additives. They are p-cresol, m-cresol, o-cresol, 2,4-xylenol, 2-ethylphenol, and guaiacol. A detailed kinetic model was constructed to predict the ignition of blends of the phenols in n-butane with the help of reaction mechanism generator (RMG), an open-source software package. The resulting model, which has 1465 species and 27 428 reactions, was validated against literature n-butane ignition data in the low-to-intermediate temperature range. To rank the anti-knock tendency of the additives, engine-like simulations were performed in a closed adiabatic homogenous batch reactor with a volume history derived from the pressure profile of a real research octane number (RON) engine test. The ignition timings of the additive blends were compared to that of primary reference fuels (PRFs) to quantitatively predict the anti-knock ability. The model predictions agree well with experimental determinations of the changes in RON induced by the additives. This study explains the chemical mechanism by which methyl-substituted phenols increase RON, and demonstrates how fundamental chemical kinetics can be used to evaluate practical fuel additive performance.

  2. National Ignition Facility Target Chamber

    International Nuclear Information System (INIS)

    Wavrik, R W; Cox, J R; Fleming, P J

    2000-01-01

    On June 11, 1999 the Department of Energy dedicated the single largest piece of the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) in Livermore, California. The ten (10) meter diameter aluminum target high vacuum chamber will serve as the working end of the largest laser in the world. The output of 192 laser beams will converge at the precise center of the chamber. The laser beams will enter the chamber in two by two arrays to illuminate 10 millimeter long gold cylinders called hohlraums enclosing 2 millimeter capsule containing deuterium, tritium and isotopes of hydrogen. The two isotopes will fuse, thereby creating temperatures and pressures resembling those found only inside stars and in detonated nuclear weapons, but on a minute scale. The NIF Project will serve as an essential facility to insure safety and reliability of our nation's nuclear arsenal as well as demonstrating inertial fusion's contribution to creating electrical power. The paper will discuss the requirements that had to be addressed during the design, fabrication and testing of the target chamber. A team from Sandia National Laboratories (SNL) and LLNL with input from industry performed the configuration and basic design of the target chamber. The method of fabrication and construction of the aluminum target chamber was devised by Pitt-Des Moines, Inc. (PDM). PDM also participated in the design of the chamber in areas such as the Target Chamber Realignment and Adjustment System, which would allow realignment of the sphere laser beams in the event of earth settlement or movement from a seismic event. During the fabrication of the target chamber the sphericity tolerances had to be addressed for the individual plates. Procedures were developed for forming, edge preparation and welding of individual plates. Construction plans were developed to allow the field construction of the target chamber to occur parallel to other NIF construction activities. This was

  3. Transport simulations of ohmic ignition experiment: IGNITEX

    International Nuclear Information System (INIS)

    Uckan, N.A.; Howe, H.C.

    1987-12-01

    The IGNITEX device, proposed by Rosenbluth et al., is a compact, super-high-field, high-current, copper-coil tokamak envisioned to reach ignition with ohmic (OH) heating alone. Several simulations of IGNITEX were made with a 0-D global model and with the 1-D PROCTR transport code. It is shown that OH ignition is a sensitive function of the assumptions about density profile, wall reflectivity of synchrotron radiation, impurity radiation, plasma edge conditions, and additional anomalous losses. In IGNITEX, OH ignition is accessible with nearly all scalings based on favorable OH confinement (such as neo-Alcator). Also, OH ignition appears to be accessible for most (not all) L-mode scalings (such as Kaye-Goldston), provided that the density profile is not too broad (parabolic or more peaked profiles are needed), Z/sub eff/ is not too large, and anomalous radiation and alpha losses and/or other enhanced transport losses (eta/sub i/ modes, edge convective energy losses, etc.) are not present. In IGNITEX, because the figure-of-merit parameters are large, ignition can be accessed (either with OH heating alone or with the aid of a small amount of auxiliary power) at relatively low beta, far from stability limits. Once the plasma is ignited, thermal runaway is prevented naturally by a combination of increased synchrotron radiation, burnout of the fuel in the plasma core and replacement by thermal alphas, and the reduction in the thermal plasma confinement assumed in L-mode-like scalings. 12 refs., 5 figs., 1 tab

  4. Transport simulations of ohmic ignition experiment: IGNITEX

    International Nuclear Information System (INIS)

    Uckan, N.A.; Howe, H.C.

    1987-01-01

    The IGNITEX device, proposed by Rosenbluth et al., is a compact, super-high-field, high-current, copper-coil tokamak envisioned to reach ignition with ohmic (OH) heating alone. Several simulations of IGNITEX were made with a 0-D global model and with the 1-D PROCTR transport code. It is shown that OH ignition is a sensitive function of the assumptions about density profile, wall reflectivity of synchrotron radiation, impurity radiation, plasma edge conditions, and additional anomalous losses. In IGNITEX, OH ignition is accessible with nearly all scalings based on favorable OH confinement (such as neo-Alcator). Also, OH ignition appears to be accessible for most (not all) L-mode scalings (such as Kaye-Goldston), provided that the density profile is not too broad (parabolic or more peaked profiles are needed), Z/sub eff/ is not too large (≤2), and anomalous radiation and alpha losses and/or other enhanced transport losses (/eta//sub i/ modes, edge convective energy losses, etc.) are not present. In IGNITEX, because the figure-of-merit parameters (aB 0 2 /q* /approximately/ IB 0 , etc.) are large, ignition can be accessed (either with OH heating alone or with the aid of a small amount of auxiliary power) at relatively low beta, far from stability limits. Once the plasma is ignited, thermal runaway is prevented naturally by a combination of increased synchrotron radiation, burnout of the fuel in the plasma core and replacement by thermal alphas, and the reduction in the thermal plasma confinement assumed in L-mode-like scalings. 12 refs., 5 figs., 1 tab

  5. Aqueous Ethanol Ignition and Engine Studies, Phase I

    Science.gov (United States)

    2010-09-01

    Our objectives were to design a micro-dilution tunnel for monitoring engine emissions, measure ignition temperature and heat release from ethanol-water-air mixtures on platinum, and initiate a computational fluid dynamics model of a catalytic igniter...

  6. Low Energy Electronic Ignition System for NOFBX Thrusters, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to develop a miniature, low RF noise ignition module for NOFBX propulsion systems. This ignition module is designed utilizing unique properties of the...

  7. Highly Durable Catalysts for Ignition of Advanced Monopropellants Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Monopropellants are readily ignited or decomposed over a bed of solid catalyst. A serious limitation of existing catalysts in the ignition of advanced...

  8. National Ignition Facility project acquisition plan revision 1

    International Nuclear Information System (INIS)

    Clobes, A.R.

    1996-01-01

    The purpose of this National Ignition Facility Acquisition Plan is to describe the overall procurement strategy planned for the National Ignition Facility M Project. It was prepared for the NIP Prood Office by the NIF Procurement Manager

  9. National Ignition Facility project acquisition plan revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Clobes, A.R.

    1996-10-01

    The purpose of this National Ignition Facility Acquisition Plan is to describe the overall procurement strategy planned for the National Ignition Facility M Project. It was prepared for the NIP Prood Office by the NIF Procurement Manager.

  10. An Additively Manufactured Torch Igniter for Liquid Propellants

    Data.gov (United States)

    National Aeronautics and Space Administration — Consistent and reliable rocket engine ignition has yet to be proven through an additively manufactured torch igniter for liquid propellants. The coupling of additive...

  11. Thermonuclear ignition in the next generation tokamaks

    International Nuclear Information System (INIS)

    Johner, J.

    1989-04-01

    The extrapolation of experimental rules describing energy confinement and magnetohydrodynamic - stability limits, in known tokamaks, allow to show that stable thermonuclear ignition equilibria should exist in this configuration, if the product aB t x of the dimensions by a magnetic-field power is large enough. Quantitative application of this result to several next-generation tokamak projects show that those kinds of equilibria could exist in such devices, which would also have enough additional heating power to promote an effective accessible ignition

  12. Nova Upgrade program: ignition and beyond

    International Nuclear Information System (INIS)

    Storm, E.; Campbell, E.M.; Hogan, W.J.; Lindl, J.D.

    1993-01-01

    The Lawrence Livermore National Laboratory (LLNL) Inertial Confinement Fusion (ICF) Program is addressing the critical physics and technology issues directed toward demonstrating and exploiting ignition and propagating burn to high gain with ICF targets for both defense and civilian applications. Nova is the primary U.S. facility employed in the study of the X-ray-driven (indirect drive) approach to ICF. Nova's principal objective is to demonstrate that laser-driven hohlraums can achieve the conditions of driver-target coupling efficiency, driver irradiation symmetry, driver pulseshaping, target preheat, and hydrodynamic stability required by hot-spot ignition and fuel compression to realize a fusion gain. (author)

  13. Plasma igniter for internal combustion engine

    Science.gov (United States)

    Fitzgerald, D. J.; Breshears, R. R. (Inventor)

    1978-01-01

    An igniter for the air/fuel mixture used in the cylinders of an internal combustion engine is described. A conventional spark is used to initiate the discharge of a large amount of energy stored in a capacitor. A high current discharge of the energy in the capacitor switched on by a spark discharge produces a plasma and a magnetic field. The resultant combined electromagnetic current and magnetic field force accelerates the plasma deep into the combustion chamber thereby providing an improved ignition of the air/fuel mixture in the chamber.

  14. Chaotic combustion in spark ignition engines

    International Nuclear Information System (INIS)

    Wendeker, Miroslaw; Czarnigowski, Jacek; Litak, Grzegorz; Szabelski, Kazimierz

    2003-01-01

    We analyse the combustion process in a spark ignition engine using the experimental data of an internal pressure during the combustion process and show that the system can be driven to chaotic behaviour. Our conclusion is based on the observation of unperiodicity in the time series, suitable stroboscopic maps and a complex structure of a reconstructed strange attractor. This analysis can explain that in some circumstances the level of noise in spark ignition engines increases considerably due to nonlinear dynamics of a combustion process

  15. The Influence of Parents' Educational Status on Students' Tendency ...

    African Journals Online (AJOL)

    The influence of parents' educational status on students' tendency to cheat in examination was investigated in Secondary Schools in Calabar South Local Government. The objective was to determine whether parents' educational qualification and current enrolment in higher institutions influence students' tendency to cheat ...

  16. Effect of Oxygen Concentration on Autogenous Ignition Temperature and Pneumatic Impact Ignitability of Nonmetallic Materials

    Science.gov (United States)

    Smith, Sarah

    2009-01-01

    Extensive test data exist on the ignitability of nonmetallic materials in pure oxygen, but these characteristics are not as well understood for lesser oxygen concentrations. In this study, autogenous ignition temperature testing and pneumatic impact testing were used to better understand the effects of oxygen concentration on ignition of nonmetallic materials. Tests were performed using oxygen concentrations of 21, 34, 45, and 100 %. The following materials were tested: PTFE Teflon(Registered Trademark), Buna-N, Silicone, Zytel(Registered Trademark) 42, Viton(registered Trademark) A, and Vespel(Registered Trademark) SP-21.

  17. A simple and efficient method to enhance audiovisual binding tendencies

    Directory of Open Access Journals (Sweden)

    Brian Odegaard

    2017-04-01

    Full Text Available Individuals vary in their tendency to bind signals from multiple senses. For the same set of sights and sounds, one individual may frequently integrate multisensory signals and experience a unified percept, whereas another individual may rarely bind them and often experience two distinct sensations. Thus, while this binding/integration tendency is specific to each individual, it is not clear how plastic this tendency is in adulthood, and how sensory experiences may cause it to change. Here, we conducted an exploratory investigation which provides evidence that (1 the brain’s tendency to bind in spatial perception is plastic, (2 that it can change following brief exposure to simple audiovisual stimuli, and (3 that exposure to temporally synchronous, spatially discrepant stimuli provides the most effective method to modify it. These results can inform current theories about how the brain updates its internal model of the surrounding sensory world, as well as future investigations seeking to increase integration tendencies.

  18. 14 CFR 23.1165 - Engine ignition systems.

    Science.gov (United States)

    2010-01-01

    ... supplemented by a generator that is automatically available as an alternate source of electrical energy to... ignition. (e) Each turbine engine ignition system must be independent of any electrical circuit that is not... generators must be large enough to meet the simultaneous demands of the engine ignition system and the...

  19. Spontaneous synchronized tapping to an auditory rhythm in a chimpanzee.

    Science.gov (United States)

    Hattori, Yuko; Tomonaga, Masaki; Matsuzawa, Tetsuro

    2013-01-01

    Humans actively use behavioral synchrony such as dancing and singing when they intend to make affiliative relationships. Such advanced synchronous movement occurs even unconsciously when we hear rhythmically complex music. A foundation for this tendency may be an evolutionary adaptation for group living but evolutionary origins of human synchronous activity is unclear. Here we show the first evidence that a member of our closest living relatives, a chimpanzee, spontaneously synchronizes her movement with an auditory rhythm: After a training to tap illuminated keys on an electric keyboard, one chimpanzee spontaneously aligned her tapping with the sound when she heard an isochronous distractor sound. This result indicates that sensitivity to, and tendency toward synchronous movement with an auditory rhythm exist in chimpanzees, although humans may have expanded it to unique forms of auditory and visual communication during the course of human evolution.

  20. National Ignition Facility frequency converter development

    International Nuclear Information System (INIS)

    Barker, C.E.; Auerbach, J.M.; Adams, C.H.

    1996-01-01

    A preliminary error budget for the third harmonic converter for the National Ignition Facility (NIF) laser driver has been developed using a root-sum-square-accumulation of error sources. Such a budget sets an upper bound on the allowable magnitude of the various effects that reduce conversion efficiency. Development efforts on crystal mounting technology and crystal quality studies are discussed

  1. Power conditioning for the National Ignition Facility

    International Nuclear Information System (INIS)

    Larson, D.W.; Anderson, R.; Boyes, J.

    1994-01-01

    A cost-effective, 320-MJ power-conditioning system has been completed for the proposed National Ignition Facility (NIF). The design features include metallized dielectric capacitors, a simple topology, and large (1.6-MJ) module size. Experimental results address the technical risks associated with the design

  2. Impacts assessment for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Bay Area Economics

    1996-12-01

    This report documents the economic and other impacts that will be created by the National Ignition Facility (NIF) construction and ongoing operation, as well as the impacts that may be created by new technologies that may be developed as a result of NIF development and operation.

  3. Studying ignition schemes on European laser facilities

    Science.gov (United States)

    Jacquemot, S.; Amiranoff, F.; Baton, S. D.; Chanteloup, J. C.; Labaune, C.; Koenig, M.; Michel, D. T.; Perez, F.; Schlenvoigt, H. P.; Canaud, B.; Cherfils Clérouin, C.; Debras, G.; Depierreux, S.; Ebrardt, J.; Juraszek, D.; Lafitte, S.; Loiseau, P.; Miquel, J. L.; Philippe, F.; Rousseaux, C.; Blanchot, N.; Edwards, C. B.; Norreys, P.; Atzeni, S.; Schiavi, A.; Breil, J.; Feugeas, J. L.; Hallo, L.; Lafon, M.; Ribeyre, X.; Santos, J. J.; Schurtz, G.; Tikhonchuk, V.; Debayle, A.; Honrubia, J. J.; Temporal, M.; Batani, D.; Davies, J. R.; Fiuza, F.; Fonseca, R. A.; Silva, L. O.; Gizzi, L. A.; Koester, P.; Labate, L.; Badziak, J.; Klimo, O.

    2011-09-01

    Demonstrating ignition and net energy gain in the near future on MJ-class laser facilities will be a major step towards determining the feasibility of Inertial Fusion Energy (IFE), in Europe as in the United States. The current status of the French Laser MégaJoule (LMJ) programme, from the laser facility construction to the indirectly driven central ignition target design, is presented, as well as validating experimental campaigns, conducted, as part of this programme, on various laser facilities. However, the viability of the IFE approach strongly depends on our ability to address the salient questions related to efficiency of the target design and laser driver performances. In the overall framework of the European HiPER project, two alternative schemes both relying on decoupling target compression and fuel heating—fast ignition (FI) and shock ignition (SI)—are currently considered. After a brief presentation of the HiPER project's objectives, FI and SI target designs are discussed. Theoretical analysis and 2D simulations will help to understand the unresolved key issues of the two schemes. Finally, the on-going European experimental effort to demonstrate their viability on currently operated laser facilities is described.

  4. A Statistical Representation of Pyrotechnic Igniter Output

    Science.gov (United States)

    Guo, Shuyue; Cooper, Marcia

    2017-06-01

    The output of simplified pyrotechnic igniters for research investigations is statistically characterized by monitoring the post-ignition external flow field with Schlieren imaging. Unique to this work is a detailed quantification of all measurable manufacturing parameters (e.g., bridgewire length, charge cavity dimensions, powder bed density) and associated shock-motion variability in the tested igniters. To demonstrate experimental precision of the recorded Schlieren images and developed image processing methodologies, commercial exploding bridgewires using wires of different parameters were tested. Finally, a statistically-significant population of manufactured igniters were tested within the Schlieren arrangement resulting in a characterization of the nominal output. Comparisons between the variances measured throughout the manufacturing processes and the calculated output variance provide insight into the critical device phenomena that dominate performance. Sandia National Laboratories is a multi-mission laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's NNSA under contract DE-AC04-94AL85000.

  5. Tests of an experimental slash ignition unit

    Science.gov (United States)

    James L. Murphy; Harry E. Schimke

    1965-01-01

    A prototype ignition package containing an incendiary powder and designed for slash and brush burning jobs showed some promise, but the unit tested was not superior to such conventional devices as fusees, diesel backpack type flamethrowers, Very pistols, and drip torches.

  6. Ignition of detonation in accreted helium envelopes

    Science.gov (United States)

    Ami Glasner, S.; Livne, E.; Steinberg, E.; Yalinewich, A.; Truran, James W.

    2018-02-01

    Sub Chandrasekhar CO white dwarfs accreting helium have been considered as candidates for SNIa progenitors since the early 1980's (helium shell mass >0.1M⊙). These models, once detonated did not fit the observed spectra and light curve of typical SNIa observations. New theoretical work examined detonations on much less massive (<0.05M⊙) envelopes. They find stable detonations that lead to light curves, spectra and abundances that compare relatively well with the observational data. The exact mechanism leading to the ignition of helium detonation is a key issue, since it is a mandatory first step for the whole scenario. As the flow of the accreted envelope is unstable to convection long before any hydrodynamic phenomena develops, a multidimensional approach is needed in order to study the ignition process. The complex convective reactive flow is challenging to any hydrodynamical solver. According to our best knowledge all previous 2D studies ignited the detonation artificially. We present here, for the first time, fully consistent results from two hydrodynamical 2D solvers that adopt two independent accurate schemes. For both solvers an effort was made to overcome the problematics raised by the finite resolution and numerical diffusion by the advective terms. Our best models lead to the ignition of a detonation in a convective cell. Our results are robust and the agreement between the two different numerical approaches is very good.

  7. Ignition strength of 25 international cigarette brands.

    Science.gov (United States)

    Seidenberg, Andrew B; Rees, Vaughan W; Alpert, Hillel R; O'Connor, Richard J; Connolly, Gregory N

    2011-01-01

    Cigarette-ignited fires are a leading cause of fire death and injury throughout the world and remain a global public health and safety problem. To reduce this harm, a small number of countries now require cigarettes to have reduced ignition propensity (RIP). It is not known if cigarette manufacturers are voluntarily introducing RIP cigarettes in other countries to help save lives. Using the ASTM E2187-04 test method, per cent full length burn (%FLB) was measured for three popular brands from each of seven countries that did not have RIP legislation at the time of purchase. Results were compared with %FLB measurements from four popular US brands purchased in a jurisdiction (Vermont) with an RIP law. SRM 1082 reference cigarette was also tested to assure laboratory quality control. All cigarette brands purchased in countries not requiring fire safety standards for cigarettes exceeded 75% FLB. In contrast, none of the cigarette brands from the USA exceeded 10% FLB. The SRM 1082 reference cigarette demonstrated 5% FLB. Cigarette ignition propensity can be greatly reduced through legislation that requires cigarette fire safety standards. RIP cigarettes have the potential to significantly decrease the number of fire deaths, injuries and destruction of property caused by cigarette-ignited fires. Appropriate standards should be applied in cigarette markets globally.

  8. Physics evaluation of compact tokamak ignition experiments

    International Nuclear Information System (INIS)

    Uckan, N.A.; Houlberg, W.A.; Sheffield, J.

    1985-01-01

    At present, several approaches for compact, high-field tokamak ignition experiments are being considered. A comprehensive method for analyzing the potential physics operating regimes and plasma performance characteristics of such ignition experiments with O-D (analytic) and 1-1/2-D (WHIST) transport models is presented. The results from both calculations are in agreement and show that there are regimes in parameter space in which a class of small (R/sub o/ approx. 1-2 m), high-field (B/sub o/ approx. 8-13 T) tokamaks with aB/sub o/ 2 /q/sub */ approx. 25 +- 5 and kappa = b/a approx. 1.6-2.0 appears ignitable for a reasonable range of transport assumptions. Considering both the density and beta limits, an evaluation of the performance is presented for various forms of chi/sub e/ and chi/sub i/, including degradation at high power and sawtooth activity. The prospects of ohmic ignition are also examined. 16 refs., 13 figs

  9. Application of Alcohols to Dual - Fuel Feeding the Spark-Ignition and Self-Ignition Engines

    OpenAIRE

    Stelmasiak Zdzisław

    2014-01-01

    This paper concerns analysis of possible use of alcohols for the feeding of self - ignition and spark-ignition engines operating in a dual- fuel mode, i.e. simultaneously combusting alcohol and diesel oil or alcohol and petrol. Issues associated with the requirements for application of bio-fuels were presented with taking into account National Index Targets, bio-ethanol production methods and dynamics of its production worldwide and in Poland. Te considerations are illustrated by results of t...

  10. Dimethyl Ether as an Ignition Improver for Hydrous Methanol Fuelled Homogeneous Charge Compression Ignition (HCCI) Engine

    OpenAIRE

    M. Venkatesan; N. Shenbaga Vinayaga Moorthi; R. Karthikeyan; A. Manivannan

    2014-01-01

    Homogeneous Charge Compression (HCCI) Ignition technology has been around for a long time, but has recently received renewed attention and enthusiasm. This paper deals with experimental investigations of HCCI engine using hydrous methanol as a primary fuel and Dimethyl Ether (DME) as an ignition improver. A regular diesel engine has been modified to work as HCCI engine for this investigation. The hydrous methanol is inducted and DME is injected into a single cylinder engine. Hence, hydrous me...

  11. Academic Dishonesty Tendencies and Values of Teacher Candidates

    Directory of Open Access Journals (Sweden)

    Ayşegül KADI

    2016-12-01

    Full Text Available The purpose of this study was to examine the values and academic dishonesty tendencies of teacher candidates. The population of this study included teacher candidates who received pedagogic formation education during 2013-2014 academic semester at the Faculty of Education at Ege University. The study was conducted with 244 teacher candidates, who were chosen through convenient sampling method. Academic Dishonesty Tendency Scale and Portrait Values Questionnaire were used to collect data. It was a correlational study due to the investigation of the relationship between values and academic dishonesty tendencies of teacher candidates. It was also a survey study since the academic dishonesty tendencies and values of teacher candidates were examined in relation to demographic variables. The results suggested that there wass a significant difference between the values and academic dishonesty tendencies of teacher candidates for gender variable. The values and academic dishonesty tendencies of teacher candidates did not differ for different fields of study. There was not a significant relationship between the academic dishonesty tendencies and values of teacher candidates.

  12. Spontaneous cooperation for prosocials, but not for proselfs: Social value orientation moderates spontaneous cooperation behavior

    Science.gov (United States)

    Mischkowski, Dorothee; Glöckner, Andreas

    2016-01-01

    Cooperation is essential for the success of societies and there is an ongoing debate whether individuals have therefore developed a general spontaneous tendency to cooperate or not. Findings that cooperative behavior is related to shorter decision times provide support for the spontaneous cooperation effect, although contrary results have also been reported. We show that cooperative behavior is better described as person × situation interaction, in that there is a spontaneous cooperation effect for prosocial but not for proself persons. In three studies, one involving population representative samples from the US and Germany, we found that cooperation in a public good game is dependent on an interaction between individuals’ social value orientation and decision time. Increasing deliberation about the dilemma situation does not affect persons that are selfish to begin with, but it is related to decreasing cooperation for prosocial persons that gain positive utility from outcomes of others and score high on the related general personality trait honesty/humility. Our results demonstrate that the spontaneous cooperation hypothesis has to be qualified in that it is limited to persons with a specific personality and social values. Furthermore, they allow reconciling conflicting previous findings by identifying an important moderator for the effect. PMID:26876773

  13. Fundamental Studies of Ignition Process in Large Natural Gas Engines Using Laser Spark Ignition

    Energy Technology Data Exchange (ETDEWEB)

    Azer Yalin; Bryan Willson

    2008-06-30

    Past research has shown that laser ignition provides a potential means to reduce emissions and improve engine efficiency of gas-fired engines to meet longer-term DOE ARES (Advanced Reciprocating Engine Systems) targets. Despite the potential advantages of laser ignition, the technology is not seeing practical or commercial use. A major impediment in this regard has been the 'open-path' beam delivery used in much of the past research. This mode of delivery is not considered industrially practical owing to safety factors, as well as susceptibility to vibrations, thermal effects etc. The overall goal of our project has been to develop technologies and approaches for practical laser ignition systems. To this end, we are pursuing fiber optically coupled laser ignition system and multiplexing methods for multiple cylinder engine operation. This report summarizes our progress in this regard. A partial summary of our progress includes: development of a figure of merit to guide fiber selection, identification of hollow-core fibers as a potential means of fiber delivery, demonstration of bench-top sparking through hollow-core fibers, single-cylinder engine operation with fiber delivered laser ignition, demonstration of bench-top multiplexing, dual-cylinder engine operation via multiplexed fiber delivered laser ignition, and sparking with fiber lasers. To the best of our knowledge, each of these accomplishments was a first.

  14. Recent results of full-spatial scale modeling of fast ignition and shock ignition

    Science.gov (United States)

    Tonge, J.; May, J.; Mori, W. B.; Fiuza, F.; Marti, M.; Fonseca, R. A.; Davies, J. R.; Silva, L. O.

    2010-11-01

    We show recent results of full-spatial scale modeling of fast ignition and shock ignition, from both full-PIC and the recently developed hybrid-PIC capability of OSIRIS 2.0. Our results show full-scale modeling of fast ignition over full density and time scales, where laser absorption, electron beam divergence, and energy deposition in the compressed core will be addressed in a self-consistent manner. Full-PIC and hybrid-PIC simulations of isolated targets will be presented, illustrating the importance of this type of modeling in order to accurately infer the beam divergence and transport properties. We will also demonstrate the possibility of performing full-scale simulations of shock ignition with the new hybrid-PIC capability, using compressed target profiles from hydrodynamic simulations, and studying the self-consistent laser absorption, electron transport, and energy deposition that can lead to the generation of the shock required for ignition. Work supported by DOE under DE-FC02-04-ER54789 and DE-FG52-09NA29552, and NSF under NSF-Phy-0904039, FCT (Portugal), and the HiPER project. Simulations performed on Hoffman at UCLA, Thresher at SDSC, and Intrepid at ANL supported by Incite grant FastIgnitionPIC.

  15. Ignition of organic explosives by an electron beam

    Directory of Open Access Journals (Sweden)

    Ivanov Georgy A.

    2015-01-01

    Full Text Available A numerical simulation of the ignition of organic explosives (PETN, HMX, RDX, TATB with an electron beam was performed. A criterion for the ignition of energetic materials with a melting point below the temperature of ignition is obtained. The results of numerical calculations of the critical energy density of the electron beam are consistent with the criterion of ignition. Calculations of the critical energy density of PETN ignition in good agreement with the experiment. The most sensitive is PETN and the most heat-resistant is TATB.

  16. Ignition and timing a guide to rebuilding, repair and replacement

    CERN Document Server

    Beever, Colin

    2015-01-01

    An essential guide to ignition and timing, for classic car owners and restorers. Aimed at both keen amateurs and professionals alike, Ignition and Timing covers the history and evolution of the automotive ignition system, and how to fit, modify and maintain your system for optimum timing and maximum performance. Topics covered include understanding and fault-testing the coil ignition system; post-war distributors and aftermarket systems; how to fit electronic ignitions and modify the distributor, including twin-point distributors; rebuilding and maintenance; Lucas, Delco and Bosch systems

  17. Comprehensive study of ignition and combustion of single wooden particles

    DEFF Research Database (Denmark)

    Momenikouchaksaraei, Maryam; Yin, Chungen; Kær, Søren Knudsen

    2013-01-01

    How quickly large biomass particles can ignite and burn out when transported into a pulverized-fuel (pf) furnace and suddenly exposed to a hot gas flow containing oxygen is very important in biomass co-firing design and optimization. In this paper, the ignition and burnout of the largest possible...... for all the test conditions. As the particle is further heated up and the volume-weighted average temperature reaches the onset of rapid decomposition of hemicellulose and cellulose, a secondary homogeneous ignition occurs. The model-predicted ignition delays and burnout times show a good agreement...... with the experimental results. Homogeneous ignition delays are found to scale with specific surface areas while heterogeneous ignition delays show less dependency on the areas. The ignition and burnout are also affected by the process conditions, in which the oxygen concentration is found to have a more pronounced...

  18. Spontaneous Atraumatic Mediastinal Hemorrhage

    Directory of Open Access Journals (Sweden)

    Morkos Iskander BSc, BMBS, MRCS, PGCertMedEd

    2013-04-01

    Full Text Available Spontaneous atraumatic mediastinal hematomas are rare. We present a case of a previously fit and well middle-aged lady who presented with acute breathlessness and an increasing neck swelling and spontaneous neck bruising. On plain chest radiograph, widening of the mediastinum was noted. The bruising was later confirmed to be secondary to mediastinal hematoma. This life-threatening diagnostic conundrum was managed conservatively with a multidisciplinary team approach involving upper gastrointestinal and thoracic surgeons, gastroenterologists, radiologists, intensivists, and hematologists along with a variety of diagnostic modalities. A review of literature is also presented to help surgeons manage such challenging and complicated cases.

  19. Is there a tendency for thrombosis in gestational diabetes mellitus?

    Directory of Open Access Journals (Sweden)

    Suheyla Gorar

    2016-01-01

    Conclusions: Our findings indicate tendency to develop thrombosis in GDM similar to diabetes mellitus; but more comprehensive studies with larger sample size are needed to determine the relationship between GDM and hemostasis.

  20. DISTANCE EDUCATION: MODERN TENDENCIES IN THE DEVELOPMENT OF LANGUAGE EDUCATION

    OpenAIRE

    Andrii O. Kravchenko

    2010-01-01

    This article deals with analyses of modern level of integration of distance education in Ukraine and around the world, it is performed the distance education in educational principles, perspective analyses of modern tendencies in development of language education is presented.

  1. Laser-induced ignition of gasoline direct-injection engines

    Science.gov (United States)

    Liedl, Gerhard; Schuoecker, Dieter; Geringer, B.; Graf, J.; Klawatsch, D.; Lenz, H. P.; Piock, W. F.; Jetzinger, M.; Kapus, P.

    2005-03-01

    A q-switched Nd:YAG laser as well as an excimer laser with an unstable resonator have been used for ignition of combustion processes. Following first experiments with a combustion bomb a gasoline direct injection engine has been modified for laser ignition by installation of a focusing element and a beam entrance window. It was possible with the q-switched Nd:YAG laser which delivers short pulses with a duration of lesss than 6 ns to ignite the engine for several 100 hours without problems. Compared to conventional spark ignition, laser ignition allows a more flexible choice of the ignition location inside the combustion chamber with the possibility to ignite even inside the fuel spray. Measurements of fuel consumption and emissions prove that laser ignition has important advantages compared to conventional spark ignition systems. Experiments with the direct injection engine have been carried out at the fundamental wavelength of the Nd:YAG laser as well as with a frequency doubled system. No differences in the minimal pulse energy needed for ignition could be found, since the minimal pulse energy for ignition is mainly determined by the ablation thresholds of combustion deposits at the surface of the window to the combustion chamber. Such combustion deposits reduce the transparency of the window where the laser beam enters the combustion chamber and a "self-cleaning" mechanism of the window by ablation is essential for successful operation. Experiments show that above a certain threshold intensity of the laser beam at the window even highly polluted surfaces could be cleaned with teh first laser pulse which is important for operation in real-world engines. Theoretically calculated energy values for laser ignition are much lower since such mechanisms are usually not considered. Power and space requirements on possible future development of laser ignition systems are discussed briefly. Several concepts for laser ignition, like diode-pumped solid state lasers (DPSS

  2. Academic Dishonesty Tendencies and Values of Teacher Candidates

    OpenAIRE

    Ayşegül KADI; Osman Ferda BEYTEKİN; Hasan ARSLAN

    2016-01-01

    The purpose of this study was to examine the values and academic dishonesty tendencies of teacher candidates. The population of this study included teacher candidates who received pedagogic formation education during 2013-2014 academic semester at the Faculty of Education at Ege University. The study was conducted with 244 teacher candidates, who were chosen through convenient sampling method. Academic Dishonesty Tendency Scale and Portrait Values Questionnaire were used to collect data. It w...

  3. Empathic Tendency of University Students in Tennis and Communication Skills

    Directory of Open Access Journals (Sweden)

    T. Osman MUTLU

    2014-07-01

    Full Text Available Communication and emphaty are an important dimension of tennis player and these skills should be developed in students and young tennis player. In this study, we aimed to determi ne the communication skills and emphatic tendency of student tennis players. Data were collected with 115 student tennis players who participated in university sport games championships. In this study, three instruments were used: Personal Knowledge Form, Communication Skills Assessing Scale (Korkut, 1996, and Emphatic Tendency Scale (Dökmen, 1988. In order to demonstrate the reliability of the scales to test the reliability of communication skills as a result of the scale, Cronbach's alpha value of 0.784 , the Cronbach alpha coefficient of empathic tendency scale was found to be 0.816. Accordingly, it can be said that the high reliability of the scales. The data sets analysed by independent samples t - test, one way ANOVA and correlation analyses. The result s showed that communication skills of the student tennis players were higher and the emphaty tendencies of the student tennis players were lower according to relevant literature. Communication skills and emphaty tendencies of the student tennis players wer e not statically significant according to ages, genders and departments of them. The correlation between The communication skills and emphaty tendencies of the student tennis players were positive and statically significant.

  4. Inhibition Effect of Phosphorus Flame Retardants on the Fire Disasters Induced by Spontaneous Combustion of Coal

    OpenAIRE

    Tang, Yibo

    2017-01-01

    Coal spontaneous combustion (CSC) generally induces fire disasters in underground mines, thus causing serious casualties, environmental pollution, and property loss around the world. By using six P-containing additives to process three typical coal samples, this study investigated the variations of the self-ignition characteristics of the coal samples before and after treatment. The analysis was performed by combining thermogravimetric analysis/differential scanning calorimetry (TG/DSC) Fouri...

  5. Advances for laser ignition of internal combustion and rocket engines

    International Nuclear Information System (INIS)

    Schwarz, E.

    2011-01-01

    The scope of the PhD thesis presented here is the investigation of theoretical and practical aspects of laser-induced spark ignition and laser thermal ignition. Laser ignition systems are currently undergoing a rapidly development with growing intensity involving more and more research groups who mainly concentrate on the field of car and large combustion engines. This research is primarily driven by the engagement to meet the increasingly strict emission limits and by the intention to use the limited energy reserves more efficiently. For internal combustion engines, laser plasma-induced ignition will allow to combine the goals for legally required reductions of pollutant emissions and higher engine efficiencies. Also for rocket engines laser ignition turns out to be very attractive. A highly reliable ignition system like laser ignition would represent an option for introducing non-toxic propellants in order to replace highly toxic and carcinogenic hydrazine-based propellants commonly used in launch vehicle upper stages and satellites. The most important results on laser ignition and laser plasma generation, accomplished by the author and, in some respects, enriched by cooperation with colleagues are presented in the following. The emphasis of this thesis is placed on the following issues: - Two-color effects on laser plasma generation - Theoretical considerations about the focal volume concerning plasma generation - Plasma transmission experiments - Ignition experiments on laser-induced ignition - Ignition experiments on thermally-induced ignition - Feasibility study on laser ignition of rocket engines The purpose of the two-color laser plasma experiments is to investigate possible constructive interference effects of driving fields that are not monochromatic, but contain (second) harmonic radiation with respect to the goal of lowering the plasma generation threshold. Such effects have been found in a number of related processes, such as laser ablation or high

  6. How to Ignite an Atmospheric Pressure Microwave Plasma Torch without Any Additional Igniters.

    Science.gov (United States)

    Leins, Martina; Gaiser, Sandra; Schulz, Andreas; Walker, Matthias; Schumacher, Uwe; Hirth, Thomas

    2015-04-16

    This movie shows how an atmospheric pressure plasma torch can be ignited by microwave power with no additional igniters. After ignition of the plasma, a stable and continuous operation of the plasma is possible and the plasma torch can be used for many different applications. On one hand, the hot (3,600 K gas temperature) plasma can be used for chemical processes and on the other hand the cold afterglow (temperatures down to almost RT) can be applied for surface processes. For example chemical syntheses are interesting volume processes. Here the microwave plasma torch can be used for the decomposition of waste gases which are harmful and contribute to the global warming but are needed as etching gases in growing industry sectors like the semiconductor branch. Another application is the dissociation of CO2. Surplus electrical energy from renewable energy sources can be used to dissociate CO2 to CO and O2. The CO can be further processed to gaseous or liquid higher hydrocarbons thereby providing chemical storage of the energy, synthetic fuels or platform chemicals for the chemical industry. Applications of the afterglow of the plasma torch are the treatment of surfaces to increase the adhesion of lacquer, glue or paint, and the sterilization or decontamination of different kind of surfaces. The movie will explain how to ignite the plasma solely by microwave power without any additional igniters, e.g., electric sparks. The microwave plasma torch is based on a combination of two resonators - a coaxial one which provides the ignition of the plasma and a cylindrical one which guarantees a continuous and stable operation of the plasma after ignition. The plasma can be operated in a long microwave transparent tube for volume processes or shaped by orifices for surface treatment purposes.

  7. How to Ignite an Atmospheric Pressure Microwave Plasma Torch without Any Additional Igniters

    Science.gov (United States)

    Leins, Martina; Gaiser, Sandra; Schulz, Andreas; Walker, Matthias; Schumacher, Uwe; Hirth, Thomas

    2015-01-01

    This movie shows how an atmospheric pressure plasma torch can be ignited by microwave power with no additional igniters. After ignition of the plasma, a stable and continuous operation of the plasma is possible and the plasma torch can be used for many different applications. On one hand, the hot (3,600 K gas temperature) plasma can be used for chemical processes and on the other hand the cold afterglow (temperatures down to almost RT) can be applied for surface processes. For example chemical syntheses are interesting volume processes. Here the microwave plasma torch can be used for the decomposition of waste gases which are harmful and contribute to the global warming but are needed as etching gases in growing industry sectors like the semiconductor branch. Another application is the dissociation of CO2. Surplus electrical energy from renewable energy sources can be used to dissociate CO2 to CO and O2. The CO can be further processed to gaseous or liquid higher hydrocarbons thereby providing chemical storage of the energy, synthetic fuels or platform chemicals for the chemical industry. Applications of the afterglow of the plasma torch are the treatment of surfaces to increase the adhesion of lacquer, glue or paint, and the sterilization or decontamination of different kind of surfaces. The movie will explain how to ignite the plasma solely by microwave power without any additional igniters, e.g., electric sparks. The microwave plasma torch is based on a combination of two resonators — a coaxial one which provides the ignition of the plasma and a cylindrical one which guarantees a continuous and stable operation of the plasma after ignition. The plasma can be operated in a long microwave transparent tube for volume processes or shaped by orifices for surface treatment purposes. PMID:25938699

  8. Joseph Conrad and the spontaneous combustion of coal - Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Walters, A.D. [Kilborn Engineering Pacific Ltd., Vancouver, BC (Canada)

    1996-12-31

    Joseph Conrad`s novel `Youth` described an on-board fire and explosion from transported coal between Sumatra and Bangka Island. This incident is based on Conrad`s experience as a mariner transporting coal, and displays a detailed knowledge of the technical issues and preventative actions involved in the spontaneous combustion of coal cargoes at sea. The coal concerned was West Hartley coal, and in this article the author examines the combustion characteristics of this coal, and the historical information available on the explosion on board the `Palestine`. The reasons for spontaneous combustion are examined, with particular attention paid to oxidation, moisture content and pyrite oxidation. West Hartley coal was a high volatile bituminous coal, with high self-heating tendencies, and so likely to undergo spontaneous combustion in the right conditions. Self-heating in ships is now well researched as a result of the international maritime coal trade. 21 refs., 3 figs., 7 tabs.

  9. Assessing the prospects for achieving double-shell ignition on the National Ignition Facility using vacuum hohlraums

    International Nuclear Information System (INIS)

    Amendt, Peter; Cerjan, C.; Hamza, A.; Hinkel, D. E.; Milovich, J. L.; Robey, H. F.

    2007-01-01

    The goal of demonstrating ignition on the National Ignition Facility [J. D. Lindl et al., Phys. Plasmas 11, 339 (2003)] has motivated a revisit of double-shell (DS) targets as a complementary path to the cryogenic baseline approach. Expected benefits of DS ignition targets include noncryogenic deuterium-tritium (DT) fuel preparation, minimal hohlraum-plasma-mediated laser backscatter, low threshold-ignition temperatures (≅4 keV) for relaxed hohlraum x-ray flux asymmetry tolerances, and minimal (two-) shock timing requirements. On the other hand, DS ignition presents several formidable challenges, encompassing room-temperature containment of high-pressure DT (≅790 atm) in the inner shell, strict concentricity requirements on the two shells ( 2 nanoporous aerogels with suspended Cu particles. A prototype demonstration of an ignition DS is planned for 2008, incorporating the needed novel nanomaterials science developments and the required fabrication tolerances for a realistic ignition attempt after 2010

  10. Ongoing spontaneous activity controls access to consciousness: a neuronal model for inattentional blindness.

    Directory of Open Access Journals (Sweden)

    Stanislas Dehaene

    2005-05-01

    Full Text Available Even in the absence of sensory inputs, cortical and thalamic neurons can show structured patterns of ongoing spontaneous activity, whose origins and functional significance are not well understood. We use computer simulations to explore the conditions under which spontaneous activity emerges from a simplified model of multiple interconnected thalamocortical columns linked by long-range, top-down excitatory axons, and to examine its interactions with stimulus-induced activation. Simulations help characterize two main states of activity. First, spontaneous gamma-band oscillations emerge at a precise threshold controlled by ascending neuromodulator systems. Second, within a spontaneously active network, we observe the sudden "ignition" of one out of many possible coherent states of high-level activity amidst cortical neurons with long-distance projections. During such an ignited state, spontaneous activity can block external sensory processing. We relate those properties to experimental observations on the neural bases of endogenous states of consciousness, and particularly the blocking of access to consciousness that occurs in the psychophysical phenomenon of "inattentional blindness," in which normal subjects intensely engaged in mental activity fail to notice salient but irrelevant sensory stimuli. Although highly simplified, the generic properties of a minimal network may help clarify some of the basic cerebral phenomena underlying the autonomy of consciousness.

  11. Ongoing spontaneous activity controls access to consciousness: a neuronal model for inattentional blindness.

    Science.gov (United States)

    Dehaene, Stanislas; Changeux, Jean-Pierre

    2005-05-01

    Even in the absence of sensory inputs, cortical and thalamic neurons can show structured patterns of ongoing spontaneous activity, whose origins and functional significance are not well understood. We use computer simulations to explore the conditions under which spontaneous activity emerges from a simplified model of multiple interconnected thalamocortical columns linked by long-range, top-down excitatory axons, and to examine its interactions with stimulus-induced activation. Simulations help characterize two main states of activity. First, spontaneous gamma-band oscillations emerge at a precise threshold controlled by ascending neuromodulator systems. Second, within a spontaneously active network, we observe the sudden "ignition" of one out of many possible coherent states of high-level activity amidst cortical neurons with long-distance projections. During such an ignited state, spontaneous activity can block external sensory processing. We relate those properties to experimental observations on the neural bases of endogenous states of consciousness, and particularly the blocking of access to consciousness that occurs in the psychophysical phenomenon of "inattentional blindness," in which normal subjects intensely engaged in mental activity fail to notice salient but irrelevant sensory stimuli. Although highly simplified, the generic properties of a minimal network may help clarify some of the basic cerebral phenomena underlying the autonomy of consciousness.

  12. Spontaneous Appendicocutaneous Fistula I

    African Journals Online (AJOL)

    M T0k0de* MB, BS and. Dr 0. A. AWOj0bi+ FMCS (Nig). ABSTRACT. Ruptured appendicitis is not a common cause of spontaneous enterocutaneous fistula. A case of ruptured retrocaecal appendicitis presenting as an enterocutaneous fistula in a Nigerian woman is presented. The literature on this disorder is also reviewed.

  13. [Spontaneous bacterial peritonitis].

    Science.gov (United States)

    Strauss, Edna; Caly, Wanda Regina

    2003-01-01

    Spontaneous bacterial peritonitis occurs in 30% of patients with ascites due to cirrhosis leading to high morbidity and mortality rates. The pathogenesis of spontaneous bacterial peritonitis is related to altered host defenses observed in end-stage liver disease, overgrowth of microorganisms, and bacterial translocation from the intestinal lumen to mesenteric lymph nodes. Clinical manifestations vary from severe to slight or absent, demanding analysis of the ascitic fluid. The diagnosis is confirmed by a number of neutrophils over 250/mm3 associated or not to bacterial growth in culture of an ascites sample. Enterobacteriae prevail and Escherichia coli has been the most frequent bacterium reported. Mortality rates decreased markedly in the last two decades due to early diagnosis and prompt antibiotic treatment. Third generation intravenous cephalosporins are effective in 70% to 95% of the cases. Recurrence of spontaneous bacterial peritonitis is common and can be prevented by the continuous use of oral norfloxacin. The development of bacterial resistance demands the search for new options in the prophylaxis of spontaneous bacterial peritonitis; probiotics are a promising new approach, but deserve further evaluation. Short-term antibiotic prophylaxis is recommended for patients with cirrhosis and ascites shortly after an acute episode of gastrointestinal bleeding.

  14. Spontaneous Grammar Explanations.

    Science.gov (United States)

    Tjoo, Hong Sing; Lewis, Marilyn

    1998-01-01

    Describes one New Zealand university language teacher's reflection on her own grammar explanations to university-level students of Bahasa Indonesian. Examines form-focused instruction through the teacher's spontaneous answers to students' questions about the form of the language they are studying. The teacher's experiences show that it takes time…

  15. EDITORIAL SPONTANEOUS BACTERIAL PERITONITIS ...

    African Journals Online (AJOL)

    hi-tech

    Spontaneous bacterial peritonitis (SBP) frequent]y occurs in patients with liver cirrhosis and ascites. It is defined as an infection of previously sterile ascitic fluid without any demonstrable intrabdominal source of infection. It is now internationally agreed that a polymorphonuclear (PMN) cell count in the ascitic fluid of over 250 ...

  16. Spontaneous dimensional reduction?

    Science.gov (United States)

    Carlip, Steven

    2012-10-01

    Over the past few years, evidence has begun to accumulate suggesting that spacetime may undergo a "spontaneous dimensional reduction" to two dimensions near the Planck scale. I review some of this evidence, and discuss the (still very speculative) proposal that the underlying mechanism may be related to short-distance focusing of light rays by quantum fluctuations.

  17. Approach and withdrawal tendencies during written word processing: effects of task, emotional valence and emotional arousal

    Directory of Open Access Journals (Sweden)

    Francesca M. M. Citron

    2016-01-01

    Full Text Available The affective dimensions of emotional valence and emotional arousal affect processing of verbal and pictorial stimuli. Traditional emotional theories assume a linear relationship between these dimensions, with valence determining the direction of a behaviour (approach vs. withdrawal and arousal its intensity or strength. In contrast, according to the valence-arousal conflict theory, both dimensions are interactively related: positive valence and low arousal (PL are associated with an implicit tendency to approach a stimulus, whereas negative valence and high arousal (NH are associated with withdrawal. Hence, positive, high-arousal (PH and negative, low-arousal (NL stimuli elicit conflicting action tendencies. By extending previous research that used several tasks and methods, the present study investigated whether and how emotional valence and arousal affect subjective approach vs. withdrawal tendencies towards emotional words during two novel tasks. In Study 1, participants had to decide whether they would approach or withdraw from concepts expressed by written words. In Studies 2 and 3 participants had to respond to each word by pressing one of two keys labelled with an arrow pointing upward or downward. Across experiments, positive and negative words, high or low in arousal, were presented. In Study 1 (explicit task, in line with the valence-arousal conflict theory, PH and NL words were responded to more slowly than PL and NH words. In addition, participants decided to approach positive words more often than negative words. In Studies 2 and 3, participants responded faster to positive than negative words, irrespective of their level of arousal. Furthermore, positive words were significantly more often associated with up responses than negative words, thus supporting the existence of implicit associations between stimulus valence and response coding (positive is up and negative is down. Hence, in contexts in which participants’ spontaneous

  18. Approach and Withdrawal Tendencies during Written Word Processing: Effects of Task, Emotional Valence, and Emotional Arousal.

    Science.gov (United States)

    Citron, Francesca M M; Abugaber, David; Herbert, Cornelia

    2015-01-01

    The affective dimensions of emotional valence and emotional arousal affect processing of verbal and pictorial stimuli. Traditional emotional theories assume a linear relationship between these dimensions, with valence determining the direction of a behavior (approach vs. withdrawal) and arousal its intensity or strength. In contrast, according to the valence-arousal conflict theory, both dimensions are interactively related: positive valence and low arousal (PL) are associated with an implicit tendency to approach a stimulus, whereas negative valence and high arousal (NH) are associated with withdrawal. Hence, positive, high-arousal (PH) and negative, low-arousal (NL) stimuli elicit conflicting action tendencies. By extending previous research that used several tasks and methods, the present study investigated whether and how emotional valence and arousal affect subjective approach vs. withdrawal tendencies toward emotional words during two novel tasks. In Study 1, participants had to decide whether they would approach or withdraw from concepts expressed by written words. In Studies 2 and 3 participants had to respond to each word by pressing one of two keys labeled with an arrow pointing upward or downward. Across experiments, positive and negative words, high or low in arousal, were presented. In Study 1 (explicit task), in line with the valence-arousal conflict theory, PH and NL words were responded to more slowly than PL and NH words. In addition, participants decided to approach positive words more often than negative words. In Studies 2 and 3, participants responded faster to positive than negative words, irrespective of their level of arousal. Furthermore, positive words were significantly more often associated with "up" responses than negative words, thus supporting the existence of implicit associations between stimulus valence and response coding (positive is up and negative is down). Hence, in contexts in which participants' spontaneous responses are

  19. Ignition on the National Ignition Facility: a path towards inertial fusion energy

    International Nuclear Information System (INIS)

    Moses, Edward I.

    2009-01-01

    The National Ignition Facility (NIF), the world's largest and most powerful laser system for inertial confinement fusion (ICF) and experiments studying high-energy-density (HED) science, is nearing completion at Lawrence Livermore National Laboratory (LLNL). NIF, a 192-beam Nd-glass laser facility, will produce 1.8 MJ, 500 TW of light at the third-harmonic, ultraviolet light of 351 nm. The NIF project is scheduled for completion in March 2009. Currently, all 192 beams have been operationally qualified and have produced over 4.0 MJ of light at the fundamental wavelength of 1053 nm, making NIF the world's first megajoule laser. The principal goal of NIF is to achieve ignition of a deuterium-tritium (DT) fuel capsule and provide access to HED physics regimes needed for experiments related to national security, fusion energy and for broader scientific applications. The plan is to begin 96-beam symmetric indirect-drive ICF experiments early in FY2009. These first experiments represent the next phase of the National Ignition Campaign (NIC). This national effort to achieve fusion ignition is coordinated through a detailed plan that includes the science, technology and equipment such as diagnostics, cryogenic target manipulator and user optics required for ignition experiments. Participants in this effort include LLNL, General Atomics, Los Alamos National Laboratory, Sandia National Laboratory and the University of Rochester Laboratory for Energetics (LLE). The primary goal for NIC is to have all of the equipment operational and integrated into the facility soon after project completion and to conduct a credible ignition campaign in 2010. When the NIF is complete, the long-sought goal of achieving self-sustaining nuclear fusion and energy gain in the laboratory will be much closer to realization. Successful demonstration of ignition and net energy gain on NIF will be a major step towards demonstrating the feasibility of inertial fusion energy (IFE) and will likely focus

  20. Ignition on the National Ignition Facility: a path towards inertial fusion energy

    Science.gov (United States)

    Moses, Edward I.

    2009-10-01

    The National Ignition Facility (NIF), the world's largest and most powerful laser system for inertial confinement fusion (ICF) and experiments studying high-energy-density (HED) science, is nearing completion at Lawrence Livermore National Laboratory (LLNL). NIF, a 192-beam Nd-glass laser facility, will produce 1.8 MJ, 500 TW of light at the third-harmonic, ultraviolet light of 351 nm. The NIF project is scheduled for completion in March 2009. Currently, all 192 beams have been operationally qualified and have produced over 4.0 MJ of light at the fundamental wavelength of 1053 nm, making NIF the world's first megajoule laser. The principal goal of NIF is to achieve ignition of a deuterium-tritium (DT) fuel capsule and provide access to HED physics regimes needed for experiments related to national security, fusion energy and for broader scientific applications. The plan is to begin 96-beam symmetric indirect-drive ICF experiments early in FY2009. These first experiments represent the next phase of the National Ignition Campaign (NIC). This national effort to achieve fusion ignition is coordinated through a detailed plan that includes the science, technology and equipment such as diagnostics, cryogenic target manipulator and user optics required for ignition experiments. Participants in this effort include LLNL, General Atomics, Los Alamos National Laboratory, Sandia National Laboratory and the University of Rochester Laboratory for Energetics (LLE). The primary goal for NIC is to have all of the equipment operational and integrated into the facility soon after project completion and to conduct a credible ignition campaign in 2010. When the NIF is complete, the long-sought goal of achieving self-sustaining nuclear fusion and energy gain in the laboratory will be much closer to realization. Successful demonstration of ignition and net energy gain on NIF will be a major step towards demonstrating the feasibility of inertial fusion energy (IFE) and will likely focus

  1. Activation analysis of the compact ignition tokamak

    International Nuclear Information System (INIS)

    Selcow, E.C.

    1986-01-01

    The US fusion program has completed the conceptual design of a compact tokamak device that achieves ignition. The high neutron wall loadings associated with this compact deuterium-tritium-burning device indicate that radiation-related issues may be significant considerations in the overall system design. Sufficient shielding will be requied for the radiation protection of both reactor components and occupational personnel. A close-in igloo shield has been designed around the periphery of the tokamak structure to permit personnel access into the test cell after shutdown and limit the total activation of the test cell components. This paper describes the conceptual design of the igloo shield system and discusses the major neutronic concerns related to the design of the Compact Ignition Tokamak

  2. Transport Simulations for Fast Ignition on NIF

    Energy Technology Data Exchange (ETDEWEB)

    Strozzi, D J; Tabak, M; Grote, D P; Cohen, B I; Shay, H D; Town, R J; Kemp, A J; Key, M

    2009-10-26

    We are designing a full hydro-scale cone-guided, indirect-drive FI coupling experiment, for NIF, with the ARC-FIDO short-pulse laser. Current rad-hydro designs with limited fuel jetting into cone tip are not yet adequate for ignition. Designs are improving. Electron beam transport simulations (implicit-PIC LSP) show: (1) Magnetic fields and smaller angular spreads increase coupling to ignition-relevant 'hot spot' (20 um radius); (2) Plastic CD (for a warm target) produces somewhat better coupling than pure D (cryogenic target) due to enhanced resistive B fields; and (3) The optimal T{sub hot} for this target is {approx} 1 MeV; coupling falls by 3x as T{sub hot} rises to 4 MeV.

  3. Conceptual Design - Polar Drive Ignition Campaign

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, R

    2012-04-05

    The Laboratory for Laser Energetics (LLE) at the University of Rochester is proposing a collaborative effort with Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratories (LANL), the Naval Research Laboratory (NRL), and General Atomics (GA) with the goal of developing a cryogenic polar drive (PD) ignition platform on the National Ignition Facility (NIF). The scope of this proposed project requires close discourse among theorists, experimentalists, and laser and system engineers. This document describes how this proposed project can be broken into a series of parallel independent activities that, if implemented, could deliver this goal in the 2017 timeframe. This Conceptual Design document is arranged into two sections: mission need and design requirements. Design requirements are divided into four subsystems: (1) A point design that details the necessary target specifications and laser pulse requirements; (2) The beam smoothing subsystem that describes the MultiFM 1D smoothing by spectral dispersion (SSD); (3) New optical elements that include continuous phase plates (CPP's) and distributed polarization rotators (DPR's); and (4) The cryogenic target handling and insertion subsystem, which includes the design, fabrication, testing, and deployment of a dedicated PD ignition target insertion cryostat (PD-ITIC). This document includes appendices covering: the primary criteria and functional requirements, the system design requirements, the work breakdown structure, the target point design, the experimental implementation plan, the theoretical unknowns and technical implementation risks, the estimated cost and schedule, the development plan for the DPR's, the development plan for MultiFM 1D SSD, and a list of acronym definitions. While work on the facility modifications required for PD ignition has been in progress for some time, some of the technical details required to define the specific modifications for a Conceptual Design

  4. Ignitability and explosibility of gases and vapors

    CERN Document Server

    Ma, Tingguang

    2015-01-01

    The book provides a systematic view on flammability and a collection of solved engineering problems in the fields of dilution and purge, mine gas safety, clean burning safety and gas suppression modeling. For the first time, fundamental principles of energy conservation are used to develop theoretical flammability diagrams and are then explored to understand various safety-related mixing problems. This provides the basis for a fully-analytical solution to any flammability problem. Instead of the traditional view that flammability is a fundamental material property, here flammability is discovered to be a result of the explosibility of air and the ignitability of fuel, or a process property. By exploring the more fundamental concepts of explosibility and ignitability, the safety targets of dilution and purge can be better defined and utilized for guiding safe operations in process safety. This book provides various engineering approaches to mixture flammability, benefiting not only the safety students, but al...

  5. Integrated thermodynamic model for ignition target performance

    Directory of Open Access Journals (Sweden)

    Springer P.T.

    2013-11-01

    Full Text Available We have derived a 3-dimensional synthetic model for NIF implosion conditions, by predicting and optimizing fits to a broad set of x-ray and nuclear diagnostics obtained on each shot. By matching x-ray images, burn width, neutron time-of-flight ion temperature, yield, and fuel ρr, we obtain nearly unique constraints on conditions in the hotspot and fuel in a model that is entirely consistent with the observables. This model allows us to determine hotspot density, pressure, areal density (ρr, total energy, and other ignition-relevant parameters not available from any single diagnostic. This article describes the model and its application to National Ignition Facility (NIF tritium–hydrogen–deuterium (THD and DT implosion data, and provides an explanation for the large yield and ρr degradation compared to numerical code predictions.

  6. Ignition and emission characteristics of methane direct injection compression ignition combustion

    International Nuclear Information System (INIS)

    Wu, N.; Davy, M.H.; Bushe, W.K.

    2006-01-01

    Engine performance and emissions for natural gas compression ignition engines was studied with reference to the advantages of diesel-cycle engine efficiency combined with low emission fuels, such as natural gas which lowers greenhouse gas emissions such as carbon dioxide, nitrogen oxides (NOx) and particulate matter. Measurements of ignition and emission characteristics were made in a shock tube facility operating at engine relevant conditions. Air was preheated and compressed using a reflected shock technique that produced run times of 4 to 5 ms. An electronically controlled prototype gaseous fuel injector was used to inject methane down the centerline of the shock tube. At nominal constant operating conditions, considerable run-to-run variability was found in the ignition kernel location, ignition timing and NOx emissions. Higher injection pressure and temperature also resulted in shorter ignition delay and higher NOx emissions. It was concluded that additional experiments are needed to further study the injection pressure's influence on NOx emissions and the relationship between the measured injection delay and NOx emissions. 5 refs., 3 tabs., 16 figs

  7. IGNITION IMPROVEMENT OF LEAN NATURAL GAS MIXTURES

    Energy Technology Data Exchange (ETDEWEB)

    Jason M. Keith

    2005-02-01

    This report describes work performed during a thirty month project which involves the production of dimethyl ether (DME) on-site for use as an ignition-improving additive in a compression-ignition natural gas engine. A single cylinder spark ignition engine was converted to compression ignition operation. The engine was then fully instrumented with a cylinder pressure transducer, crank shaft position sensor, airflow meter, natural gas mass flow sensor, and an exhaust temperature sensor. Finally, the engine was interfaced with a control system for pilot injection of DME. The engine testing is currently in progress. In addition, a one-pass process to form DME from natural gas was simulated with chemical processing software. Natural gas is reformed to synthesis gas (a mixture of hydrogen and carbon monoxide), converted into methanol, and finally to DME in three steps. Of additional benefit to the internal combustion engine, the offgas from the pilot process can be mixed with the main natural gas charge and is expected to improve engine performance. Furthermore, a one-pass pilot facility was constructed to produce 3.7 liters/hour (0.98 gallons/hour) DME from methanol in order to characterize the effluent DME solution and determine suitability for engine use. Successful production of DME led to an economic estimate of completing a full natural gas-to-DME pilot process. Additional experimental work in constructing a synthesis gas to methanol reactor is in progress. The overall recommendation from this work is that natural gas to DME is not a suitable pathway to improved natural gas engine performance. The major reasons are difficulties in handling DME for pilot injection and the large capital costs associated with DME production from natural gas.

  8. Prechamber Compression-Ignition Engine Performance

    Science.gov (United States)

    Moore, Charles S; Collins, John H , Jr

    1938-01-01

    Single-cylinder compression-ignition engine tests were made to investigate the performance characteristics of prechamber type of cylinder head. Certain fundamental variables influencing engine performance -- clearance distribution, size, shape, and direction of the passage connecting the cylinder and prechamber, shape of prechamber, cylinder clearance, compression ratio, and boosting -- were independently tested. Results of motoring and of power tests, including several typical indicator cards, are presented.

  9. Apparatus for igniting oil-bearing formations

    Energy Technology Data Exchange (ETDEWEB)

    McArthur, J.L.

    1968-01-30

    The described method of igniting a combustion well comprises the steps of lowering a receptable containing triethylborane, breaking it at bottom, and contacting it with air. To prevent a premature explosion, the reactant is encapsulated, placed in a burner assembly, and lowered to the bottom by wire line. A pin is then sheared by a jarring action, and the reactant liberated and contacted with air. (4 claims)

  10. Research on measurement of aviation magneto ignition strength and balance

    Science.gov (United States)

    Gao, Feng; He, Zhixiang; Zhang, Dingpeng

    2017-12-01

    Aviation magneto ignition system failure accounted for two-thirds of the total fault aviation piston engine and above. At present the method used for this failure diagnosis is often depended on the visual inspections in the civil aviation maintenance field. Due to human factors, the visual inspections cannot provide ignition intensity value and ignition equilibrium deviation value among the different spark plugs in the different cylinder of aviation piston engine. So air magneto ignition strength and balance testing has become an aviation piston engine maintenance technical problem needed to resolve. In this paper, the ultraviolet sensor with detection wavelength of 185~260nm and driving voltage of 320V DC is used as the core of ultraviolet detection to detect the ignition intensity of Aviation magneto ignition system and the balance deviation of the ignition intensity of each cylinder. The experimental results show that the rotational speed within the range 0 to 3500 RPM test error less than 0.34%, ignition strength analysis and calculation error is less than 0.13%, and measured the visual inspection is hard to distinguish between high voltage wire leakage failure of deviation value of 200 pulse ignition strength balance/Sec. The method to detect aviation piston engine maintenance of magneto ignition system fault has a certain reference value.

  11. A mechanistic approach to safe igniter implementation for hydrogen mitigation

    International Nuclear Information System (INIS)

    Breitung, W.; Dorofeev, S.B.; Travis, J.R.

    1997-01-01

    A new methodology for safe igniter implementation in a full-scale 3-d containment is described. The method consists of the following steps: determination of bounding H 2 /steam sources; high-resolution analysis of the 3-d transport and mixing processes; evaluation of the detonation potential at the time of ignition; optimization of the igniter system such that only early ignition and nonenergetic combustion occurs; and modelling of the continuous deflagration processes during H 2 -release. The method was implemented into the GASFLOW code. The principle and the feasibility is demonstrated for a single room geometry. A full-scale 3-d reactor case is analyzed without and with deliberate ignition, assuming a severe dry H 2 release sequence (1200 kg). In the unmitigated case significant DDT potential in the whole containment develops, including the possibility of global detonations. The analysis with igniters in different positions predicted deflagration or detonation in the break compartment, depending on the igniter location. Igniter positions were found which lead to early ignition, effective H 2 -removal, and negligible pressure loads. The approach can be used to determine number, position and frequency of a safe igniter system for a given large dry containment. (author)

  12. Magnetic booster fast ignition macron accelerator

    Science.gov (United States)

    Winterberg, F.

    2006-11-01

    A new fast ignition scheme was recently proposed where the ignition is done by the impact of a small solid projectile accelerated to velocities in excess of 108cm/s, with the acceleration done in two steps: first, by laser ablation of a flyer plate, and second by injecting the flyer plate into a conical duct. The two principal difficulties of this scheme are as follows: first, the required large mass ratio for the laser ablation rocket propelled flyer plate, and second, the Rayleigh-Taylor instability of the flyer plate during its implosive compression in the conical duct. To overcome these difficulties, it is suggested to accelerate a projectile by a magnetic fusion booster stage, made up of a dense, wall-confined magnetized plasma brought to thermonuclear temperatures. After ignition, this plasma undergoes a thermonuclear excursion greatly increasing its pressure, resulting in the explosion of a weakened segment of the wall, with the segment becoming a fast moving projectile. The maximum velocity this projectile can reach is the velocity of sound of the booster stage plasma, which at a temperature of 108K is of the order 108cm/s.

  13. Plasma engineering assessments of compact ignition experiments

    International Nuclear Information System (INIS)

    Houlberg, W.A.

    1985-01-01

    Confinement, startup sequences, and fast-alpha particle effects are assessed for a class of compact tokamak ignition experiments having high toroidal magnetic fields (8 to 12 T) and high toroidal currents (7 to 10 MA). The uncertainties in confinement scaling are spanned through examples of performance with an optimistic model based on ohmically heated plasmas and a pessimistic model that includes confinement degradation by both auxiliary and alpha heating. The roles of neoclassical resistivity enhancement and sawtooth behavior are also evaluated. Copper toroidal field coils place restrictions on pulse lengths due to resistive heating, so a simultaneous rampup of the toroidal field and plasma current is proposed as a means of compressing the startup phase and lengthening the burn phase. If the ignition window is small, fast-alpha particle physics is restricted to the high-density regime where a short slowing-down time leads to low fast-particle density and pressure contributions. Under more optimistic confinement, a larger ignition margin broadens the range of alpha particle physics that can be addressed. These issues are illustrated through examples of transport simulations for a set of machine parameters called BRAND-X, which typify the designs under study

  14. Magnetic booster fast ignition macron accelerator

    International Nuclear Information System (INIS)

    Winterberg, F.

    2006-01-01

    A new fast ignition scheme was recently proposed where the ignition is done by the impact of a small solid projectile accelerated to velocities in excess of 10 8 cm/s, with the acceleration done in two steps: first, by laser ablation of a flyer plate, and second by injecting the flyer plate into a conical duct. The two principal difficulties of this scheme are as follows: first, the required large mass ratio for the laser ablation rocket propelled flyer plate, and second, the Rayleigh-Taylor instability of the flyer plate during its implosive compression in the conical duct. To overcome these difficulties, it is suggested to accelerate a projectile by a magnetic fusion booster stage, made up of a dense, wall-confined magnetized plasma brought to thermonuclear temperatures. After ignition, this plasma undergoes a thermonuclear excursion greatly increasing its pressure, resulting in the explosion of a weakened segment of the wall, with the segment becoming a fast moving projectile. The maximum velocity this projectile can reach is the velocity of sound of the booster stage plasma, which at a temperature of 10 8 K is of the order 10 8 cm/s

  15. Laser spark distribution and ignition system

    Science.gov (United States)

    Woodruff, Steven [Morgantown, WV; McIntyre, Dustin L [Morgantown, WV

    2008-09-02

    A laser spark distribution and ignition system that reduces the high power optical requirements for use in a laser ignition and distribution system allowing for the use of optical fibers for delivering the low peak energy pumping pulses to a laser amplifier or laser oscillator. An optical distributor distributes and delivers optical pumping energy from an optical pumping source to multiple combustion chambers incorporating laser oscillators or laser amplifiers for inducing a laser spark within a combustion chamber. The optical distributor preferably includes a single rotating mirror or lens which deflects the optical pumping energy from the axis of rotation and into a plurality of distinct optical fibers each connected to a respective laser media or amplifier coupled to an associated combustion chamber. The laser spark generators preferably produce a high peak power laser spark, from a single low power pulse. The laser spark distribution and ignition system has application in natural gas fueled reciprocating engines, turbine combustors, explosives and laser induced breakdown spectroscopy diagnostic sensors.

  16. The national ignition facility performance status

    Energy Technology Data Exchange (ETDEWEB)

    Haynam, C.; Auerbach, J.; Bowers, M.; Di-Nicola, J.M.; Dixit, S.; Erbert, G.; Heestand, G.; Henesian, M.; Jancaitis, K.; Manes, K.; Marshall, C.; Mehta, N.; Nostrand, M.; Orth, C.; Sacks, R.; Shaw, M.; Sutton, S.; Wegner, P.; Williams, W.; Widmayer, C.; White, R.; Yang, S.; Van Wonterghem, B. [Lawrence Livermore National Laboratory, Livermore, CA (United States)

    2006-06-15

    The National Ignition Facility (NIF) laser has been designed to support high energy density science, including the demonstration of fusion ignition through Inertial Confinement. NIF operated a single 'quad' of 4 beams from December 2002 through October 2004 in order to gain laser operations experience, support target experiments, and demonstrate laser performance consistent with NIF's design requirement. During this two-year period, over 400 Main Laser shots were delivered at 1{omega} to calorimeters for diagnostic calibration purposes, at 3{omega} to the Target Chamber, and at 1{omega}, 2{omega}, and 3{omega} to the precision diagnostic system (PDS). The PDS includes its own independent single beam transport system, NIF design frequency conversion hardware and optics, and laser sampling optics that deliver light to a broad range of laser diagnostics. Highlights of NIF laser performance will be discussed including the results of high energy 2{omega} and 3{omega} experiments, the use of multiple focal spot beam conditioning techniques, the reproducibility of laser performance on multiple shots, the generation on a single beam of a 3{omega} temporally shaped ignition pulse at full energy and power, and recent results on full bundle (8 beamline) performance. NIF's first quad laser performance meets or exceeds NIF's design requirements. (authors)

  17. The National Ignition Facility Performance Status

    Energy Technology Data Exchange (ETDEWEB)

    Haynam, C; Auerbach, J; Nicola, J D; Dixit, S; Heestand, G; Henesian, M; Jancaitis, K; Manes, K; Marshall, C; Mehta, N; Nostrand, M; Orth, C; Sacks, R; Shaw, M; Sutton, S; Wegner, P; Williams, W; Widmayer, C; White, R; Yang, S; Van Wonterghem, B

    2005-08-30

    The National Ignition Facility (NIF) laser has been designed to support high energy density science (HEDS), including the demonstration of fusion ignition through Inertial Confinement. NIF operated a single ''quad'' of 4 beams from December 2002 through October 2004 in order to gain laser operations experience, support target experiments, and demonstrate laser performance consistent with NIF's design requirement. During this two-year period, over 400 Main Laser shots were delivered at 1{omega} to calorimeters for diagnostic calibration purposes, at 3{omega} to the Target Chamber, and at 1{omega}, 2{omega}, and 3{omega} to the Precision Diagnostics System (PDS). The PDS includes its own independent single beam transport system, NIF design frequency conversion hardware and optics, and laser sampling optics that deliver light to a broad range of laser diagnostics. Highlights of NIF laser performance will be discussed including the results of high energy 2{omega} and 3{omega} experiments, the use of multiple focal spot beam conditioning techniques, the reproducibility of laser performance on multiple shots, the generation on a single beam of a 3{omega} temporally shaped ignition pulse at full energy and power, and recent results on full bundle (8 beamline) performance. NIF's first quad laser performance meets or exceeds NIF's design requirements.

  18. Opportunities for Integrated Fast Ignition program

    International Nuclear Information System (INIS)

    Mackinnon, A. J.; Key, M. H.; Hatchett, S. P.; Tabak, M.; Town, R.; Gregori, G.; Patel, P. K.; Snavely, R.; Freeman, R. R.; Stephens, R. B.; Beg, F.

    2005-01-01

    Experiments designed to investigate the physics of particle transport and heating of dense plasmas have been carried out in an number of facilities around the world since the publication of the fast ignition concept in 1997. To date a number of integrated experiments, examining the capsule implosion and subsequent heating have been carried out on the Gekko facility at the Institute of Laser Engineering (ILE) Osaka, Japan. The coupling of energy by the short pulse into the pre-compressed core in these experiments was very encouraging. More facilities capable of carrying out integrated experiments are currently under construction: Firex at ILEm the Omega EP facility at the University of Rochester, Z PW at Sandia National Lab, LIL in France and eventually high energy PW beams on the NIF. This presentation will review the current status of experiments in this area and discuss the capabilities of integrated fast ignition research that will be required to design the proof of principle and scaling experiments for fast ignition to be carried on the NIF. (Author)

  19. Innovative ICF scheme-impact fast ignition

    International Nuclear Information System (INIS)

    Murakami, M.; Nagatomo, H.; Sakaiya, T.; Karasik, M.; Gardner, J.; Bates, J.

    2007-01-01

    A totally new ignition scheme for ICF, impact fast ignition (IFI), is proposed [1], in which the compressed DT main fuel is to be ignited by impact collision of another fraction of separately imploded DT fuel, which is accelerated in the hollow conical target. Two-dimensional hydrodynamic simulation results in full geometry are presented, in which some key physical parameters for the impact shell dynamics such as 10 8 cm/s of the implosion velocity, 200- 300 g/cm 3 of the compressed density, and the converted temperature beyond 5 keV are demonstrated. As the first step toward the proof-of-principle of IFI, we have conducted preliminary experiments under the operation of GEKKO XII/HYPER laser system to achieve a hyper-velocity of the order of 108 cm/s. As a result we have observed a highest velocity, 6.5 x 10 7 cm/s, ever achieved. Furthermore, we have also done the first integrated experiments using the target and observed substantial amount of neutron yields. Reference: [1] M. Murakami and Nagatomo, Nucl. Instrum. Meth. Phys. Res. A 544(2005) 67

  20. Progress Towards Microwave Ignition of Explosives

    Science.gov (United States)

    Curling, Mark; Collins, Adam; Dima, Gabriel; Proud, William

    2009-06-01

    Microwaves could provide a method of propellant ignition that does away with a traditional primer, making ammunition safer and suitable for Insensitive Munitions (IM) applications. By embedding a suitable material inside a propellant, it is postulated that microwaves could be used to stimulate hotspots, through direct heating or electrostatic discharge (arcing) across the energetic material. This paper reports on progress in finding these suitable materials. Graphite rod, magnetite cubes and powders of graphite, aluminium, copper oxide, and iron were irradiated in a conventional microwave oven. Temperature measurements were made using a shielded thermocouple and thermal paints. Only graphite rod and magnetite showed significant heating upon microwave exposure. The light output from arcing of iron, steel, iron pyrite, magnetite and graphite was measured in the same microwave oven as above. Sample mass and shape were correlated with arcing intensity. A strategy is proposed to create a homogeneous igniter material by embedding arcing materials within an insulator, Polymethylpentene (TPX). External discharges were transmitted through TPX, however no embedded samples were successful in generating an electrical breakdown suitable for propellant ignition.

  1. Carbon footprint of automotive ignition coil

    Science.gov (United States)

    Chang, Huey-Ling; Chen, Chih-Ming; Sun, Chin-Huang; Lin, Hung-Di

    2015-07-01

    In recent years, environmental issues, such as climate change and global warming due to the excessive development of industry, have attracted increasing attention of citizens worldwide. It is known that CO2 accounts for the largest proportion of greenhouse gases. Therefore, how to reduce CO2 emissions during the life cycle of a product to lessen its impact on environment is an important topic in the industrial society. Furthermore, it is also of great significance to cut down the required energy so as to lower its production costs during the manufacturing process nowadays. This study presents the carbon footprint of an automotive ignition coil and its partial materials are defined to explore their carbon emissions and environmental impact. The model IPCC GWP100a calculates potential global greenhouse effect by converting them into CO2 equivalents. In this way, the overall carbon footprint of an ignition coil can be explored. By using IPCC GWP100a, the results display that the shell has the most carbon emissions. The results can help the industry reduce the carbon emissions of an ignition coil product.

  2. [Enterprising tendencies of nurses in a university hospital].

    Science.gov (United States)

    Costa, Fabiana Gallo; Vaghetti, Helena Heidtmann; Martinello, Daniela Faustino Gonçalves; Mendes, Daniel Pinho; Terra, Alessandra Chaves; Alvarez, Simone Quadros; Lemos, Luiz Augusto Pinto

    2013-09-01

    Quantitative study aimed to identify the enterprising tendency of nurses at a university hospital and to relate them with age, length of work in the hospital and conclusion of the nursing course. This cross-sectional quantitative study was developed in 2010. All 60 nurses from the hospital answered the questionnaire General measure of Enterprising Tendency, which contains five categories. In the creativity category one nurse obtained two points; in need for achievement one nurse totaled 12 points; one nurse obtained two points; in motivation four nurses achieved higher scores; in taking calculated risks, the highest score was 10 points, in autonomy, nine nurses obtained one point each. Individuals aged between 27 and 33 years showed higher enterprising tendencies. Reduced enterprising tendencies were found for nurses aged between 43 and 56 years, graduated more than 17 years ago and with a greater length of work. Actions are necessary to encourage nurses in the age range of enterprising tendency decline and those who graduated longer ago and who have worked for a longer period of time in the hospital.

  3. Human mesostriatal response tracks motivational tendencies under naturalistic goal conflict.

    Science.gov (United States)

    Gonen, Tal; Soreq, Eyal; Eldar, Eran; Ben-Simon, Eti; Raz, Gal; Hendler, Talma

    2016-06-01

    Goal conflict situations, involving the simultaneous presence of reward and punishment, occur commonly in real life, and reflect well-known individual differences in the behavioral tendency to approach or avoid. However, despite accumulating neural depiction of motivational processing, the investigation of naturalistic approach behavior and its interplay with individual tendencies is remarkably lacking. We developed a novel ecological interactive scenario which triggers motivational behavior under high or low goal conflict conditions. Fifty-five healthy subjects played the game during a functional magnetic resonance imaging scan. A machine-learning approach was applied to classify approach/avoidance behaviors during the game. To achieve an independent measure of individual tendencies, an integrative profile was composed from three established theoretical models. Results demonstrated that approach under high relative to low conflict involved increased activity in the ventral tegmental area (VTA), peri-aquaductal gray, ventral striatum (VS) and precuneus. Notably, only VS and VTA activations during high conflict discriminated between approach/avoidance personality profiles, suggesting that the relationship between individual personality and naturalistic motivational tendencies is uniquely associated with the mesostriatal pathway. VTA-VS further demonstrated stronger coupling during high vs low conflict. These findings are the first to unravel the multilevel relationship among personality profile, approach tendencies in naturalistic set-up and their underlying neural manifestation, thus enabling new avenues for investigating approach-related psychopathologies. © The Author (2016). Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

  4. Laser imprint and implications for direct drive ignition with the National Ignition Facility

    International Nuclear Information System (INIS)

    Weber, S.V.; Glendinning, S.G.; Kalantar, D.H.; Remington, B.A.; Rothenberg, J.E.

    1996-01-01

    For direct drive ICF, nonuniformities in laser illumination can seed ripples at the ablation front in a process called imprint. Such nonuniformities will grow during the capsule implosion and can penetrate the capsule shell impede ignition, or degrade burn. We have simulated imprint for a number of experiments on tile Nova laser. Results are in generally good agreement with experimental data. We leave also simulated imprint upon National Ignition Facility (NIF) direct drive ignition capsules. Imprint modulation amplitude comparable to the intrinsic surface finish of ∼40 nm is predicted for a laser bandwidth of 0.5 THz. Ablation front modulations experience growth factors up to several thousand, carrying modulation well into the nonlinear regime. Saturation modeling predicts that the shell should remain intact at the time of peak velocity, but penetration at earlier times appears more marginal

  5. A Comparative Study of Cycle Variability of Laser Plug Ignition vs Classical Spark Plug Ignition in Combustion Engines

    Science.gov (United States)

    Done, Bogdan

    2017-10-01

    Over the past 30 years numerous studies and laboratory experiments have researched the use of laser energy to ignite gas and fuel-air mixtures. The actual implementation of this laser application has still to be fully achieved in a commercial automotive application. Laser Plug Ignition as a replacement for Spark Plug Ignition in the internal combustion engines of automotive vehicles, offers several potential benefits such as extending lean burn capability, reducing the cyclic variability between combustion cycles and decreasing the total amount of ignition costs, and implicitly weight and energy requirements. The paper presents preliminary results of cycle variability study carried on a SI Engine equipped with laser Plug Ignition system. Versus classic ignition system, the use of the laser Plug Ignition system assures the reduction of the combustion process variability, reflected in the lower values of the coefficient of variability evaluated for indicated mean effective pressure, maximum pressure, maximum pressure angle and maximum pressure rise rate. The laser plug ignition system was mounted on an experimental spark ignition engine and tested at the regime of 90% load and 2800 rev/min, at dosage of λ=1.1. Compared to conventional spark plug, laser ignition assures the efficiency at lean dosage.

  6. Spontaneous healing of spontaneous coronary artery dissection.

    Science.gov (United States)

    Almafragi, Amar; Convens, Carl; Heuvel, Paul Van Den

    2010-01-01

    Spontaneous coronary artery dissection (SCAD) is a rare cause of acute coronary syndrome and sudden cardiac death. It should be suspected in every healthy young woman without cardiac risk factors, especially during the peripartum or postpartum periods. It is important to check for a history of drug abuse, collagen vascular disease or blunt trauma of the chest. Coronary angiography is essential for diagnosis and early management. We wonder whether thrombolysis might aggravate coronary dissection. All types of treatment (medical therapy, percutaneous intervention or surgery) improve the prognosis without affecting survival times if used appropriately according to the clinical stability and the angiographic features of the involved coronary arteries. Prompt recognition and targeted treatment improve outcomes. We report a case of SCAD in a young female free of traditional cardiovascular risk factors, who presented six hours after thrombolysis for ST elevation myocardial infarction. Coronary angiography showed a dissection of the left anterior descending and immediate branch. She had successful coronary artery bypass grafting, with complete healing of left anterior descending dissection.

  7. Experimental investigations of the minimum ignition energy and the minimum ignition temperature of inert and combustible dust cloud mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Addai, Emmanuel Kwasi, E-mail: emmanueladdai41@yahoo.com; Gabel, Dieter; Krause, Ulrich

    2016-04-15

    Highlights: • Ignition sensitivity of a highly flammable dust decreases upon addition of inert dust. • Minimum ignition temperature of a highly flammable dust increases when inert concentration increase. • Minimum ignition energy of a highly flammable dust increases when inert concentration increase. • The permissible range for the inert mixture to minimize the ignition risk lies between 60 to 80%. - Abstract: The risks associated with dust explosions still exist in industries that either process or handle combustible dust. This explosion risk could be prevented or mitigated by applying the principle of inherent safety (moderation). This is achieved by adding an inert material to a highly combustible material in order to decrease the ignition sensitivity of the combustible dust. The presented paper deals with the experimental investigation of the influence of adding an inert dust on the minimum ignition energy and the minimum ignition temperature of the combustible/inert dust mixtures. The experimental investigation was done in two laboratory scale equipment: the Hartmann apparatus and the Godbert-Greenwald furnace for the minimum ignition energy and the minimum ignition temperature test respectively. This was achieved by mixing various amounts of three inert materials (magnesium oxide, ammonium sulphate and sand) and six combustible dusts (brown coal, lycopodium, toner, niacin, corn starch and high density polyethylene). Generally, increasing the inert materials concentration increases the minimum ignition energy as well as the minimum ignition temperatures until a threshold is reached where no ignition was obtained. The permissible range for the inert mixture to minimize the ignition risk lies between 60 to 80%.

  8. Analysis of Possible Explosion at KSC Due to Spontaneous Ignition of Hypergolic Propellants

    Science.gov (United States)

    2010-07-01

    unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 1.0 INTRODUCTION NASA’s Constellation Program...beyond. Part of the ARES spacecraft is the Orion Crew Exploration Vehicle (CEV), which includes the Crew Module (CM) and Service Module (SM). The... Orion CM’s main propulsion system and supplies are provided by the SM. The SM is to be processed off line and moved to the Vehicle Assembly Building

  9. The cetene scale and the induction period preceding the spontaneous ignition of diesel fuels in bombs

    Science.gov (United States)

    Michailova, M N; Neumann, M B

    1936-01-01

    In the present report a comparison is made between the scale obtained with mixtures of cetane and l-methyl naphthalene in a bomb, and that obtained with the same fuels in a Waukesha engine. The tests were conducted in a metal bomb heated by a Nichrome spiral. The fuel was injected into the bomb from a Bosch jet by means of a specially constructed plunger pump. The instant injection and the pressure curve in the bomb were registered by a beam of light which was reflected from a mirror connected to the needle of the jet and to a membrane indicator.

  10. The National Ignition Facility. The path to ignition and inertial fusion energy

    International Nuclear Information System (INIS)

    Eric Storm

    2010-01-01

    Complete text of publication follows. The National Ignition Facility (NIF), the world's largest and most energetic laser system built for studying inertial confinement fusion (ICF) and high-energy-density (HED) science, is now operational at Lawrence Livermore National Laboratory (LLNL). NIF's 192 beams are capable of producing 1.8 MJ and 500 TW of ultraviolet light and are configured to create pressures as high as 100 GB, matter temperatures approaching 10 9 and densities over 1000 g/cm 3 . With these capabis70lities, the NIF will enable exploring scientific problems in strategic defense, basic science and fusion energy. One of the early NIF campaigns is focusing on demonstrating laboratory-scale thermonuclear ignition and burn to produce net fusion energy gains of 10-20 with 1.2 to 1.4 MJ of 0.35 μm light. NIF ignition experiments began late in FY2009 as part of the National Ignition Campaign (NIC). Participants of NIC include LLNL, General Atomics, Los Alamos National Laboratory, Sandia National Laboratory, and the University of Rochester Laboratory for Energetics (LLE) as well as variety of national and international collaborators. The results from these initial experiments show great promise for the relatively near-term achievement of ignition. Capsule implosion experiments at energies up to 1.2 MJ have demonstrated laser energetics, radiation temperatures, and symmetry control that scale to ignition conditions. Of particular importance is the demonstration of peak hohlraum temperatures near 300 eV with low overall backscatter less than 10%. Cryogenic target capability and additional diagnostics are being installed in preparation for layered target deuterium-tritium implosions to be conducted later in 2010. The goal for NIC is to demonstrate a predictable fusion experimental platform by the end of 2012. Successful demonstration of ignition and net energy gain on NIF will be a major step towards demonstrating the feasibility of Inertial Fusion Energy (IFE) and

  11. Examination of the Prosocial and Aggressive Tendencies of Preservice Teachers

    Directory of Open Access Journals (Sweden)

    Özlem GÖZÜN KAHRAMAN

    2013-12-01

    Full Text Available The purpose of the study was to investigate the relationship between gender and the witnessed interparental violence during childhood and the prosocial and aggressive tendencies of 586 senior class students enrolled at the faculty of education of a university at the Eastern Anatolian Region. The research is a survey model and a socio-demographic survey, and ‘Prosocial Behavior Tendency Scale' and ‘Aggressiveness Scale' were applied to the participants. The applied statistical techniques included descriptive statistics, one-way ANOVA, and t test for independent groups. In conclusion, it is stated that gender and witnessed interparental violence were to affect the prosocial and aggressive tendencies of the participants.

  12. Spontaneous spinal epidural abscess.

    LENUS (Irish Health Repository)

    Ellanti, P

    2011-10-01

    Spinal epidural abscess is an uncommon entity, the frequency of which is increasing. They occur spontaneously or as a complication of intervention. The classical triad of fever, back pain and neurological symptoms are not always present. High index of suspicion is key to diagnosis. Any delay in diagnosis and treatment can have significant neurological consequences. We present the case of a previously well man with a one month history of back pain resulting from an epidural abscess.

  13. Modeling Inertia and Variety Seeking Tendencies in Brand Choice Behavior

    OpenAIRE

    Kapil Bawa

    1990-01-01

    Theories of exploratory behavior suggest that inertia and variety-seeking tendencies may coexist within the individual, implying that the same individual may exhibit inertia and variety-seeking at different times depending on his/her choice history. Past research has not allowed for such -consumer variability in these tendencies. The purpose of this study is to present a choice model that allows us to identify such “hybrid” behavior (i.e., a mixture of inertia and variety-seeking), and to dis...

  14. Assessment of the role of religious tendency in domestic violence.

    Science.gov (United States)

    Pournaghash-Tehrani, Said; Ehsan, Hadi Bahrami; Gholami, Somaye

    2009-12-01

    The present study assessed relationships between religiosity and the perpetration of violence by husbands and wives toward one another in an Iranian context. 180 Iranian couples living in Iran were administered the Islamic Religious Tendency and Domestic Violence questionnaires. Patterns of relationship between aspects of religious tendency and expressed violence were similar in men and women. There was a negative correlation between Religiosity, Religious Valuation, and self-reported Domestic Violence of husbands and wives. Religious Disorganization was positively correlated with expressed Domestic Violence of husbands and wives. Finally, the results of a regression analysis revealed that only Religiosity and Religious Disorganization predicted self-reported Domestic Violence of husbands and wives.

  15. Elements of a method to scale ignition reactor Tokamak

    International Nuclear Information System (INIS)

    Cotsaftis, M.

    1984-08-01

    Due to unavoidable uncertainties from present scaling laws when projected to thermonuclear regime, a method is proposed to minimize these uncertainties in order to figure out the main parameters of ignited tokamak. The method mainly consists in searching, if any, a domain in adapted parameters space which allows Ignition, but is the least sensitive to possible change in scaling laws. In other words, Ignition domain is researched which is the intersection of all possible Ignition domains corresponding to all possible scaling laws produced by all possible transports

  16. Review of the National Ignition Campaign 2009-2012

    International Nuclear Information System (INIS)

    Lindl, John; Landen, Otto; Edwards, John; Moses, Ed

    2014-01-01

    The National Ignition Campaign (NIC) was a multi-institution effort established under the National Nuclear Security Administration of DOE in 2005, prior to the completion of the National Ignition Facility (NIF) in 2009. The scope of the NIC was the planning and preparation for and the execution of the first 3 yr of ignition experiments (through the end of September 2012) as well as the development, fielding, qualification, and integration of the wide range of capabilities required for ignition. Besides the operation and optimization of the use of NIF, these capabilities included over 50 optical, x-ray, and nuclear diagnostic systems, target fabrication facilities, experimental platforms, and a wide range of NIF facility infrastructure. The goal of ignition experiments on the NIF is to achieve, for the first time, ignition and thermonuclear burn in the laboratory via inertial confinement fusion and to develop a platform for ignition and high energy density applications on the NIF. The goal of the NIC was to develop and integrate all of the capabilities required for a precision ignition campaign and, if possible, to demonstrate ignition and gain by the end of FY12. The goal of achieving ignition can be divided into three main challenges. The first challenge is defining specifications for the target, laser, and diagnostics with the understanding that not all ignition physics is fully understood and not all material properties are known. The second challenge is designing experiments to systematically remove these uncertainties. The third challenge is translating these experimental results into metrics designed to determine how well the experimental implosions have performed relative to expectations and requirements and to advance those metrics toward the conditions required for ignition. This paper summarizes the approach taken to address these challenges, along with the progress achieved to date and the challenges that remain. At project completion in 2009, NIF lacked

  17. Hydrodynamic modeling and simulations of shock ignition thresholds

    Directory of Open Access Journals (Sweden)

    Lafon M.

    2013-11-01

    Full Text Available The Shock Ignition (SI scheme [1] offers to reduce the laser requirements by relaxing the implosion phase to sub-ignition velocities and later adding an intense laser spike. Depending on laser energy, target characteristics and implosion velocity, high gains are expected [2,3]. Relevant intensities for scaled targets imploded in the velocity range from 150 to 400 km/s are defined at ignition thresholds. A range of moderate implosion velocities is specified to match safe implosions. These conditions for target design are then inferred for relevant NIF and LMJ shock-ignited targets.

  18. Highly Durable Catalysts for Ignition of Advanced Monopropellants, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposed SBIR Phase I addresses the development of catalysts and technology for the ignition of advanced monopropellants consisting of mixtures of...

  19. Definition of Time Induction of Self-Ignition of the Substance on the Prognostic Extrapolation Depending on the Basis of Indicators Fire and Explosion Hazard

    Science.gov (United States)

    Sechin, A.; Kyrmakova, O.; Osipenko, S.

    2016-01-01

    In this article the research directed on development of a technique of definition of time of induction of the self-ignition of substances and materials which is an indicator of the beginning of development of an emergency is conducted. The experiment consisting in supervision over process of self-ignition of coal and oil deposits was the basis for research. On the basis of experimental data the curve expressing analytic - expected dependence of size of temperature of ignition on induction time was constructed. Proceeding from graphical representation of process, functional dependence of time of induction on a temperature indicator was received: y = 16920 • x0 537. By means of known indicators of such substances as bitumen oil oxidized (the combustible solid substance received by oxidation of residual product of oil refining) and tar oil (the combustible solid substance which is residual product of oil refining) and the received algorithm, verification of reliability of the received dependence and a technique of definition of time of induction of spontaneous ignition of deposits of oil in general was carried out. The practical importance of the conducted research is that having data on time of induction of process of self-ignition, by means of preventive measures becomes possible to avoid and prevent accidents in oil and oil processing branches, at the same time loss of property and loss of human life.

  20. Hemispherical Capsule Implosions for Fast Ignition*

    Science.gov (United States)

    Hanson, D. L.; Vesey, R. A.; Sinars, D. B.; Adams, R. G.; Cuneo, M. E.; Porter, J. L.; Slutz, S. A.; Johnston, R. R.; Wenger, D. F.; Schroen, D. G.

    2003-10-01

    The fast ignitor approach to ICF ignition separates the fuel assembly and fast heating processes. After compressing the fuel with the main driver, the fuel is ignited using a focused electron or ion beam generated by a fast, ultra-high power laser pulse. This significantly relaxes the drive symmetry, energy, and shock timing requirements compared to hot spot ignition. A hemispherical capsule target is a fast ignitor geometry well-adapted to symmetric fuel compression by a single-ended z-pinch radiation drive. The hemispherical capsule implodes radially, constrained at its equator by a flat high-density surface (a special case of the spherical capsule "cone-focus" geometry). This glide plane is mounted on a hollow pedestal that provides a plasma-free, short-pulse laser path to the compressed fuel core region. In experiments on the Z accelerator at Sandia, we are studying implosions of 2.0-mm-diameter, 60-micron-thick hemispherical capsules in cylindrical secondary hohlraums heated to 90-100 eV from one end by a 120 TW wire-array z-pinch. Analysis of ZBL 6.7 keV point-projection backlighter images of pole-hot implosions in a tall secondary and 6.18 keV monochromatic crystal backlighter images of more symmetric implosions in a short secondary will be presented. We will also discuss progress on the development of a cryogenic liquid fuel target for this fast ignitor compression geometry. * Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000.

  1. Experimental investigations of the minimum ignition energy and the minimum ignition temperature of inert and combustible dust cloud mixtures.

    Science.gov (United States)

    Addai, Emmanuel Kwasi; Gabel, Dieter; Krause, Ulrich

    2016-04-15

    The risks associated with dust explosions still exist in industries that either process or handle combustible dust. This explosion risk could be prevented or mitigated by applying the principle of inherent safety (moderation). This is achieved by adding an inert material to a highly combustible material in order to decrease the ignition sensitivity of the combustible dust. The presented paper deals with the experimental investigation of the influence of adding an inert dust on the minimum ignition energy and the minimum ignition temperature of the combustible/inert dust mixtures. The experimental investigation was done in two laboratory scale equipment: the Hartmann apparatus and the Godbert-Greenwald furnace for the minimum ignition energy and the minimum ignition temperature test respectively. This was achieved by mixing various amounts of three inert materials (magnesium oxide, ammonium sulphate and sand) and six combustible dusts (brown coal, lycopodium, toner, niacin, corn starch and high density polyethylene). Generally, increasing the inert materials concentration increases the minimum ignition energy as well as the minimum ignition temperatures until a threshold is reached where no ignition was obtained. The permissible range for the inert mixture to minimize the ignition risk lies between 60 to 80%. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Development of a simulation model for compression ignition engine running with ignition improved blend

    Directory of Open Access Journals (Sweden)

    Sudeshkumar Ponnusamy Moranahalli

    2011-01-01

    Full Text Available Department of Automobile Engineering, Anna University, Chennai, India. The present work describes the thermodynamic and heat transfer models used in a computer program which simulates the diesel fuel and ignition improver blend to predict the combustion and emission characteristics of a direct injection compression ignition engine fuelled with ignition improver blend using classical two zone approach. One zone consists of pure air called non burning zone and other zone consist of fuel and combustion products called burning zone. First law of thermodynamics and state equations are applied in each of the two zones to yield cylinder temperatures and cylinder pressure histories. Using the two zone combustion model the combustion parameters and the chemical equilibrium composition were determined. To validate the model an experimental investigation has been conducted on a single cylinder direct injection diesel engine fuelled with 12% by volume of 2- ethoxy ethanol blend with diesel fuel. Addition of ignition improver blend to diesel fuel decreases the exhaust smoke and increases the thermal efficiency for the power outputs. It was observed that there is a good agreement between simulated and experimental results and the proposed model requires low computational time for a complete run.

  3. A trial of ignition innovation of gasoline engine by nanosecond pulsed low temperature plasma ignition

    International Nuclear Information System (INIS)

    Shiraishi, Taisuke; Urushihara, Tomonori; Gundersen, Martin

    2009-01-01

    Application of nanosecond pulsed low temperature plasma as an ignition technique for automotive gasoline engines, which require a discharge under conditions of high back pressure, has been studied experimentally using a single-cylinder engine. The nanosecond pulsed plasma refers to the transient (non-equilibrated) phase of a plasma before the formation of an arc discharge; it was obtained by applying a high voltage with a nanosecond pulse (FWHM of approximately 80 or 25 ns) between coaxial cylindrical electrodes. It was confirmed that nanosecond pulsed plasma can form a volumetric multi-channel streamer discharge at an energy consumption of 60 mJ cycle -1 under a high back pressure of 1400 kPa. It was found that the initial combustion period was shortened compared with the conventional spark ignition. The initial flame visualization suggested that the nanosecond pulsed plasma ignition results in the formation of a spatially dispersed initial flame kernel at a position of high electric field strength around the central electrode. It was observed that the electric field strength in the air gap between the coaxial cylindrical electrodes was increased further by applying a shorter pulse. It was also clarified that the shorter pulse improved ignitability even further.

  4. Computational Prediction of Shock Ignition Thresholds and Ignition Probability of Polymer-Bonded Explosives

    Science.gov (United States)

    Wei, Yaochi; Kim, Seokpum; Horie, Yasuyuki; Zhou, Min

    2017-06-01

    A computational approach is developed to predict the probabilistic ignition thresholds of polymer-bonded explosives (PBXs). The simulations explicitly account for microstructure, constituent properties, and interfacial responses and capture processes responsible for the development of hotspots and damage. The specific damage mechanisms considered include viscoelasticity, viscoplasticity, fracture, post-fracture contact, frictional heating, and heat conduction. The probabilistic analysis uses sets of statistically similar microstructure samples to mimic relevant experiments for statistical variations of material behavior due to inherent material heterogeneities. The ignition thresholds and corresponding ignition probability maps are predicted for PBX 9404 and PBX 9501 for the impact loading regime of Up = 200 --1200 m/s. James and Walker-Wasley relations are utilized to establish explicit analytical expressions for the ignition probability as a function of load intensities. The predicted results are in good agreement with available experimental measurements. The capability to computationally predict the macroscopic response out of material microstructures and basic constituent properties lends itself to the design of new materials and the analysis of existing materials. The authors gratefully acknowledge the support from Air Force Office of Scientific Research (AFOSR) and the Defense Threat Reduction Agency (DTRA).

  5. Karyotypic differences and evolutionary tendencies of some species ...

    Indian Academy of Sciences (India)

    Karyotypic differences and evolutionary tendencies of some species from the subgenus Obliquodesmus Mlad. of genus Scenedesmus Meyen. (Chlorophyta, Chlorococcales). BALIK DZHAMBAZOV1,3 ∗, RUMEN MLADENOV2, IVANKA TENEVA2 and DETELINA BELKINOVA2. 1Cell Biology Laboratory, Department of ...

  6. Implicit action tendencies and evaluations in unwanted snacking behaviour

    NARCIS (Netherlands)

    Maas, J.; Keijsers, G.P.J.; Rinck, M.; Sharbanee, J.; Vroling, M.S.; Backer, E.S.

    2017-01-01

    The present study investigated automatic/implicit and controlled/explicit processes in snacking behavior. Participants who were bothered by their habit of eating snacks were compared to participants with another habit. A reaction time task was used to assess implicit action tendencies in which

  7. Implicit action tendencies and evaluations in unwanted snacking behavior

    NARCIS (Netherlands)

    Maas, J.; Keijsers, G.P.J.; Rinck, M.; Sharbanee, J.M.; Vroling, M.S.; Becker, E.S.

    2017-01-01

    The present study investigated automatic/implicit and controlled/explicit processes in snacking behavior. Participants who were bothered by their habit of eating snacks were compared to participants with another habit. A reaction time task was used to assess implicit action tendencies in which

  8. Using Experimental Methods to Investigate Discriminatory Tendencies: A Lesson Report

    Science.gov (United States)

    Chen, Yu-Wen; Masch, Lena; Finze, Kristin

    2014-01-01

    Using dictator games in experimental analysis, this lesson report demonstrates the process and results of a postgraduate class project in which university students were instructed to scientifically investigate and explore one of German society's most hotly-contested issues: the level of discriminatory tendencies of non-Muslims towards Muslims. The…

  9. the influence of parents' educational status on students' tendency to ...

    African Journals Online (AJOL)

    PROF. BARTH EKWEME

    The objective was to determine whether parents' educational qualification and current enrolment in higher institutions influence students' ... Okordudu (2010) reported that lassair–faire parenting style effectively predicts adolescents ... identified many social, cultural and economic factors associated with students' tendency to.

  10. Duration of Sleep and ADHD Tendency among Adolescents in China

    Science.gov (United States)

    Lam, Lawrence T.; Yang, L.

    2008-01-01

    Objective: This study investigates the association between duration of sleep and ADHD tendency among adolescents. Method: This population-based health survey uses a two-stage random cluster sampling design. Participants ages 13 to 17 are recruited from the total population of adolescents attending high school in one city of China. Duration of…

  11. Restrained eaters show enhanced automatic approach tendencies towards food

    NARCIS (Netherlands)

    Veenstra, Esther M.; de Jong, Peter J.

    Although restrained eaters intend to limit their caloric intake, they nevertheless frequently fail and indulge in exactly the foods they want to avoid. Because automatic food-relevant approach tendencies and affective associations may both (independently) contribute to the dysregulation of food

  12. Preliminary validation of the Multi-Attitude Suicide Tendency (MAST ...

    African Journals Online (AJOL)

    Objective:The factor structure of the Multi-Attitude Suicide Tendency (MAST) scale was examined using a sample of non-white South African adolescents. Method: The MAST scale was administered to 205 secondary school students between 13 and 20 years of age. Results: The scale demonstrated satisfactory internal ...

  13. investigating water absorption and thickness swelling tendencies of ...

    African Journals Online (AJOL)

    HOD

    INVESTIGATING WATER ABSORPTION AND THICKNESS SWELLING TENDENCIES OF POLYMERIC COMPOSITE … O. Adekomaya & K. Adama. Nigerian Journal of Technology,. Vol. 37, No. 1, January 2018. 169. Table 2: Physical and thermal properties of epoxy resin materials (Adapted from manufacturer data sheet).

  14. Evaluation of disordered eating tendencies in young adults.

    Science.gov (United States)

    Sanlier, Nevin; Navruz Varli, Semra; Macit, M Sedanur; Mortas, Hande; Tatar, Tugba

    2017-12-01

    It was aimed to determine the prevalence of high disordered eating tendencies and its relationship with food addiction, emotional eating and self esteem in participants at 18 and 33 years age group. This study was planned as a cross-sectional study and conducted with 1359 young adult volunteers (M = 386, F = 973) with an average age of 22.4 ± 2.84 years. Eating Attitudes Test-26 (EAT-26), Yale Food Addiction Scale (YFAS), Emotional Appetite Questionnaire (EMAQ) and Rosenberg Self-Esteem Scale (RSES) were used. EAT-26 score above 20 was considered as eating disorders risk cutoff. Participants with disordered eating tendencies have higher rates (22.4%) of food addiction compared to participants without high disordered eating tendencies (7.2%). There is no difference for EMAQ and YFAS scores; however, there is a significant difference for RSES and EAT-26 scores according to gender. A positive association of EAT-26 with YFAS and EMAQ-negative scores and a negative association of EAT-26 with RSES and EMAQ-positive were found. There is association among EAT-26, YFAS, and Rosenberg Self-Esteem Scale, and Emotional Appetite Questionnaire scores. This study provides information for future studies about high disordered eating tendencies, food addiction and mood that are thought to be important in young adults. Level V (cross-sectional descriptive study).

  15. Ice-cream consumption, tendency toward overeating, and personality

    NARCIS (Netherlands)

    van Strien, T

    2000-01-01

    OBJECTIVE: The exploration of the mechanisms underlying the tendency toward overeating by investigating the Dutch Eating Behavior Questionnaire (DEBQ)/Revised Eating Disorders Inventory (EDI-R) disinhibition, in sequence to the milkshake-ice cream study (van Strien, Cleven, and Schippers, in press).

  16. Karyotypic differences and evolutionary tendencies of some species ...

    Indian Academy of Sciences (India)

    Karyotypic differences and evolutionary tendencies of some species from the subgenus Obliquodesmus Mlad. of genus Scenedesmus Meyen (Chlorophyta, ... Department of Experimental Medical Science, BMC I 11, Lund University, 22184 Lund, Sweden; Department of Botany, University of Plovdiv, 24 Tsar Assen St., 4000 ...

  17. The Political Tendency in Environmental and Sustainability Education

    Science.gov (United States)

    Håkansson, Michael; Östman, Leif; Van Poeck, Katrien

    2018-01-01

    This article presents a categorisation of the different situations in which the political dimension of environmental and sustainability education can be handled and experienced in practice: the "political tendency." Using a methodology inspired by Wittgenstein's user perspective on language, we empirically identified situations that…

  18. EARLY LIFE RISKS, ANTISOCIAL TENDENCIES, AND PRETEEN DELINQUENCY*

    Science.gov (United States)

    Staff, Jeremy; Whichard, Corey; Siennick, Sonja; Maggs, Jennifer

    2015-01-01

    Early age-of-onset delinquency and substance use confer a major risk for continued criminality, alcohol and drug abuse, and other serious difficulties throughout the life course. Our objective is to examine the developmental roots of preteen delinquency and substance use. Using nationally representative longitudinal data from the UK Millennium Cohort Study (n = 13,221), we examine the influence of early childhood developmental and family risks on latent pathways of antisocial tendencies from ages 3 to 7, and the influence of those pathways on property crime and substance use by age 11. We identified a normative, non-antisocial pathway; a pathway marked by oppositional behavior and fighting; a pathway marked by impulsivity and inattention; and a rare pathway characterized by a wide range of antisocial tendencies. Children with developmental and family risks that emerged by age 3—specifically difficult infant temperament, low cognitive ability, weak parental closeness, and disadvantaged family background—face increased odds of antisocial tendencies. There is minimal overlap between the risk factors for early antisocial tendencies and those for preteen delinquency. Children on an antisocial pathway are more likely to engage in preteen delinquency and substance use by age 11, even after accounting for early life risk factors. PMID:26900167

  19. An Exploration of Taiwanese Adolescents' Impulsive Buying Tendency

    Science.gov (United States)

    Lin, Chien-Huang; Lin, Hung-Ming

    2005-01-01

    The purpose of this study was to examine via a questionnaire the personal characteristics and impulsive buying tendencies of 15- to 19-year-old Taiwanese adolescents. Results indicated that the impulsive buying was significantly associated with gender, age, and amount of pocket money available. Females indicated more impulsive buying than did…

  20. Value Acculturation and Response Tendencies of Biethnic Adolescents.

    Science.gov (United States)

    Georgas, James; Kalantzi-Azizi, Anastasia

    1992-01-01

    Investigates the modes of acculturation and response tendencies of 133 adolescents from biethnic families in Athens (Greece) compared to 113 homoethnic Greek adolescents in Athens and 80 homoethnic Greek adolescents living in Germany and The Netherlands. Patterns of acculturation of values differ for adolescents from biethnic and homoethnic…

  1. An Examination of Geography Teachers' Reflective Thinking Tendencies

    Science.gov (United States)

    Yildirim, Tahsin

    2017-01-01

    This study is a descriptive research study executed using a scanning model with the purpose of examining geography teachers' tendencies towards reflective thinking according to different variables. The study group consisted of 218 geography teachers serving in schools under the Ministry of National Education in the 2016/2017 education period. For…

  2. Volatility in GARCH Models of Business Tendency Index

    Science.gov (United States)

    Wahyuni, Dwi A. S.; Wage, Sutarman; Hartono, Ateng

    2018-01-01

    This paper aims to obtain a model of business tendency index by considering volatility factor. Volatility factor detected by ARCH (Autoregressive Conditional Heteroscedasticity). The ARCH checking was performed using the Lagrange multiplier test. The modeling is Generalized Autoregressive Conditional Heteroscedasticity (GARCH) are able to overcome volatility problems by incorporating past residual elements and residual variants.

  3. The Comparison of Emphatic Tendencies of the Management Department Students

    Science.gov (United States)

    Belli, Emre; Yildirim, Fatih; Naktiyok, Serkan; Gurbuz, Ali; Aydin, Ali Dursun

    2015-01-01

    The aim of the current research is to make a comparison between the university students majoring at the department of sport management at Kafkas University and Atatürk University in terms of empathy level. For data collection, "Emphatic Tendency Scale", which was developed by Dökmen (1994) and which included 20 items, was administered to…

  4. Psychopathological tendencies and quality of life among patients with thalassemia

    International Nuclear Information System (INIS)

    Anwar, K.; Waqar, S.

    2017-01-01

    To explore the relationship between psychopathological tendencies and Quality of Life (QoL) among patients with Thalassemia major. Methodology: In this correlational study, data were collected from the blood transfusion dependent patients of beta-thalassemia major in Rawalpindi and Islamabad hospitals from September to December 2014. Urdu version of Worlds Health Organization Quality of Life Scale-BREF (WHOQOL-BREF) and Brief Symptom Inventory (BSI) methods were administered on 74 patients of thalassemia major. Pearson Product Correlation, Independent Sample t-test, One-way ANOVA and Post Hoc analysis were used. Results: There was higher levels of somatization, hostility and obsessive compulsive (OC) and lower levels of psychoticism. There was negatively affected social and psychological domains of life while comparatively better QoL related to environmental conditions of the patients. There was negative relationship between psychopathological tendencies and QoL among patients. Moreover, mother's education level negatively related with psychopathological tendencies among patients. Males scored high on depression and interpersonal sensitivity, whereas females scored high on anxiety, paranoid ideation and somatization. Female patients experienced better QoL as compared to male counterparts. Conclusion: There were higher degrees of psychopathological tendencies among patients with thalassemia major which affected their QoL mainly on social and psychological domains. (author)

  5. Propellant-Flow-Actuated Rocket Engine Igniter

    Science.gov (United States)

    Wollen, Mark

    2013-01-01

    A rocket engine igniter has been created that uses a pneumatically driven hammer that, by specialized geometry, is induced into an oscillatory state that can be used to either repeatedly impact a piezoelectric crystal with sufficient force to generate a spark capable of initiating combustion, or can be used with any other system capable of generating a spark from direct oscillatory motion. This innovation uses the energy of flowing gaseous propellant, which by means of pressure differentials and kinetic motion, causes a hammer object to oscillate. The concept works by mass flows being induced through orifices on both sides of a cylindrical tube with one or more vent paths. As the mass flow enters the chamber, the pressure differential is caused because the hammer object is supplied with flow on one side and the other side is opened with access to the vent path. The object then crosses the vent opening and begins to slow because the pressure differential across the ball reverses due to the geometry in the tube. Eventually, the object stops because of the increasing pressure differential on the object until all of the kinetic energy has been transferred to the gas via compression. This is the point where the object reverses direction because of the pressure differential. This behavior excites a piezoelectric crystal via direct impact from the hammer object. The hammer strikes a piezoelectric crystal, then reverses direction, and the resultant high voltage created from the crystal is transferred via an electrode to a spark gap in the ignition zone, thereby providing a spark to ignite the engine. Magnets, or other retention methods, might be employed to favorably position the hammer object prior to start, but are not necessary to maintain the oscillatory behavior. Various manifestations of the igniter have been developed and tested to improve device efficiency, and some improved designs are capable of operation at gas flow rates of a fraction of a gram per second (0

  6. Uncertainties associated with inertial-fusion ignition

    International Nuclear Information System (INIS)

    McCall, G.H.

    1981-01-01

    An estimate is made of a worst case driving energy which is derived from analytic and computer calculations. It will be shown that the uncertainty can be reduced by a factor of 10 to 100 if certain physical effects are understood. That is not to say that the energy requirement can necessarily be reduced below that of the worst case, but it is possible to reduce the uncertainty associated with ignition energy. With laser costs in the $0.5 to 1 billion per MJ range, it can be seen that such an exercise is worthwhile

  7. Descriptive Epidemiology of Somatising Tendency: Findings from the CUPID Study

    Science.gov (United States)

    Vargas-Prada, Sergio; Coggon, David; Ntani, Georgia; Walker-Bone, Karen; Palmer, Keith T.; Felli, Vanda E.; Harari, Raul; Barrero, Lope H.; Felknor, Sarah A.; Gimeno, David; Cattrell, Anna; Bonzini, Matteo; Solidaki, Eleni; Merisalu, Eda; Habib, Rima R.; Sadeghian, Farideh; Kadir, M. Masood; Warnakulasuriya, Sudath S. P.; Matsudaira, Ko; Nyantumbu, Busisiwe; Sim, Malcolm R.; Harcombe, Helen; Cox, Ken; Sarquis, Leila M. M.; Marziale, Maria H.; Harari, Florencia; Freire, Rocio; Harari, Natalia; Monroy, Magda V.; Quintana, Leonardo A.; Rojas, Marianela; Harris, E. Clare; Serra, Consol; Martinez, J. Miguel; Delclos, George; Benavides, Fernando G.; Carugno, Michele; Ferrario, Marco M.; Pesatori, Angela C.; Chatzi, Leda; Bitsios, Panos; Kogevinas, Manolis; Oha, Kristel; Freimann, Tiina; Sadeghian, Ali; Peiris-John, Roshini J.; Sathiakumar, Nalini; Wickremasinghe, A. Rajitha; Yoshimura, Noriko; Kelsall, Helen L.; Hoe, Victor C. W.; Urquhart, Donna M.; Derrett, Sarah; McBride, David; Herbison, Peter; Gray, Andrew; Vega, Eduardo J. Salazar

    2016-01-01

    Somatising tendency, defined as a predisposition to worry about common somatic symptoms, is importantly associated with various aspects of health and health-related behaviour, including musculoskeletal pain and associated disability. To explore its epidemiological characteristics, and how it can be specified most efficiently, we analysed data from an international longitudinal study. A baseline questionnaire, which included questions from the Brief Symptom Inventory about seven common symptoms, was completed by 12,072 participants aged 20–59 from 46 occupational groups in 18 countries (response rate 70%). The seven symptoms were all mutually associated (odds ratios for pairwise associations 3.4 to 9.3), and each contributed to a measure of somatising tendency that exhibited an exposure-response relationship both with multi-site pain (prevalence rate ratios up to six), and also with sickness absence for non-musculoskeletal reasons. In most participants, the level of somatising tendency was little changed when reassessed after a mean interval of 14 months (75% having a change of 0 or 1 in their symptom count), although the specific symptoms reported at follow-up often differed from those at baseline. Somatising tendency was more common in women than men, especially at older ages, and varied markedly across the 46 occupational groups studied, with higher rates in South and Central America. It was weakly associated with smoking, but not with level of education. Our study supports the use of questions from the Brief Symptom Inventory as a method for measuring somatising tendency, and suggests that in adults of working age, it is a fairly stable trait. PMID:27128094

  8. Descriptive Epidemiology of Somatising Tendency: Findings from the CUPID Study.

    Science.gov (United States)

    Vargas-Prada, Sergio; Coggon, David; Ntani, Georgia; Walker-Bone, Karen; Palmer, Keith T; Felli, Vanda E; Harari, Raul; Barrero, Lope H; Felknor, Sarah A; Gimeno, David; Cattrell, Anna; Bonzini, Matteo; Solidaki, Eleni; Merisalu, Eda; Habib, Rima R; Sadeghian, Farideh; Kadir, M Masood; Warnakulasuriya, Sudath S P; Matsudaira, Ko; Nyantumbu, Busisiwe; Sim, Malcolm R; Harcombe, Helen; Cox, Ken; Sarquis, Leila M M; Marziale, Maria H; Harari, Florencia; Freire, Rocio; Harari, Natalia; Monroy, Magda V; Quintana, Leonardo A; Rojas, Marianela; Harris, E Clare; Serra, Consol; Martinez, J Miguel; Delclos, George; Benavides, Fernando G; Carugno, Michele; Ferrario, Marco M; Pesatori, Angela C; Chatzi, Leda; Bitsios, Panos; Kogevinas, Manolis; Oha, Kristel; Freimann, Tiina; Sadeghian, Ali; Peiris-John, Roshini J; Sathiakumar, Nalini; Wickremasinghe, A Rajitha; Yoshimura, Noriko; Kelsall, Helen L; Hoe, Victor C W; Urquhart, Donna M; Derrett, Sarah; McBride, David; Herbison, Peter; Gray, Andrew; Vega, Eduardo J Salazar

    2016-01-01

    Somatising tendency, defined as a predisposition to worry about common somatic symptoms, is importantly associated with various aspects of health and health-related behaviour, including musculoskeletal pain and associated disability. To explore its epidemiological characteristics, and how it can be specified most efficiently, we analysed data from an international longitudinal study. A baseline questionnaire, which included questions from the Brief Symptom Inventory about seven common symptoms, was completed by 12,072 participants aged 20-59 from 46 occupational groups in 18 countries (response rate 70%). The seven symptoms were all mutually associated (odds ratios for pairwise associations 3.4 to 9.3), and each contributed to a measure of somatising tendency that exhibited an exposure-response relationship both with multi-site pain (prevalence rate ratios up to six), and also with sickness absence for non-musculoskeletal reasons. In most participants, the level of somatising tendency was little changed when reassessed after a mean interval of 14 months (75% having a change of 0 or 1 in their symptom count), although the specific symptoms reported at follow-up often differed from those at baseline. Somatising tendency was more common in women than men, especially at older ages, and varied markedly across the 46 occupational groups studied, with higher rates in South and Central America. It was weakly associated with smoking, but not with level of education. Our study supports the use of questions from the Brief Symptom Inventory as a method for measuring somatising tendency, and suggests that in adults of working age, it is a fairly stable trait.

  9. Descriptive Epidemiology of Somatising Tendency: Findings from the CUPID Study.

    Directory of Open Access Journals (Sweden)

    Sergio Vargas-Prada

    Full Text Available Somatising tendency, defined as a predisposition to worry about common somatic symptoms, is importantly associated with various aspects of health and health-related behaviour, including musculoskeletal pain and associated disability. To explore its epidemiological characteristics, and how it can be specified most efficiently, we analysed data from an international longitudinal study. A baseline questionnaire, which included questions from the Brief Symptom Inventory about seven common symptoms, was completed by 12,072 participants aged 20-59 from 46 occupational groups in 18 countries (response rate 70%. The seven symptoms were all mutually associated (odds ratios for pairwise associations 3.4 to 9.3, and each contributed to a measure of somatising tendency that exhibited an exposure-response relationship both with multi-site pain (prevalence rate ratios up to six, and also with sickness absence for non-musculoskeletal reasons. In most participants, the level of somatising tendency was little changed when reassessed after a mean interval of 14 months (75% having a change of 0 or 1 in their symptom count, although the specific symptoms reported at follow-up often differed from those at baseline. Somatising tendency was more common in women than men, especially at older ages, and varied markedly across the 46 occupational groups studied, with higher rates in South and Central America. It was weakly associated with smoking, but not with level of education. Our study supports the use of questions from the Brief Symptom Inventory as a method for measuring somatising tendency, and suggests that in adults of working age, it is a fairly stable trait.

  10. On the effect of injection timing on the ignition of lean PRF/air/EGR mixtures under direct dual fuel stratification conditions

    KAUST Repository

    Luong, Minh Bau

    2017-06-10

    The ignition characteristics of lean primary reference fuel (PRF)/air/exhaust gas recirculation (EGR) mixture under reactivity-controlled compression ignition (RCCI) and direct duel fuel stratification (DDFS) conditions are investigated by 2-D direct numerical simulations (DNSs) with a 116-species reduced chemistry of the PRF oxidation. The 2-D DNSs of the DDFS combustion are performed by varying the injection timing of iso-octane (i-C8H18) with a pseudo-iso-octane (PC8H18) model together with a novel compression heating model to account for the compression heating and expansion cooling effects of the piston motion in an engine cylinder. The PC8H18 model is newly developed to mimic the timing, duration, and cooling effects of the direct injection of i-C8H18 onto a premixed background charge of PRF/air/EGR mixture with composition inhomogeneities. It is found that the RCCI combustion exhibits a very high peak heat release rate (HRR) with a short combustion duration due to the predominance of the spontaneous ignition mode of combustion. However, the DDFS combustion has much lower peak HRR and longer combustion duration regardless of the fuel injection timing compared to those of the RCCI combustion, which is primarily attributed to the sequential injection of i-C8H18. It is also found that the ignition delay of the DDFS combustion features a non-monotonic behavior with increasing fuel-injection timing due to the different effect of fuel evaporation on the low-, intermediate-, and high-temperature chemistry of the PRF oxidation. The budget and Damköhler number analyses verify that although a mixed combustion mode of deflagration and spontaneous ignition exists during the early phase of the DDFS combustion, the spontaneous ignition becomes predominant during the main combustion, and hence, the spread-out of heat release rate in the DDFS combustion is mainly governed by the direct injection process of i-C8H18. Finally, a misfire is observed for the DDFS combustion when

  11. Spontaneous Thigh Compartment Syndrome

    Directory of Open Access Journals (Sweden)

    Khan, Sameer K

    2011-02-01

    Full Text Available A young man presented with a painful and swollen thigh, without any history of trauma, illness, coagulopathic medication or recent exertional exercise. Preliminary imaging delineated a haematoma in the anterior thigh, without any fractures or muscle trauma. Emergent fasciotomies were performed. No pathology could be identified intra-operatively, or on follow-up imaging. A review of thigh compartment syndromes described in literature is presented in a table. Emergency physicians and traumatologists should be cognisant of spontaneous atraumatic presentations of thigh compartment syndrome, to ensure prompt referral and definitive management of this limb-threatening condition. [West J Emerg Med. 2011;12(1:134-138].

  12. Polar Direct Drive Shock Ignition Design on LMJ

    Science.gov (United States)

    Le Bel, Edouard; Schurtz, Guy; Ribeyre, Xavier; Lafon, Marion

    2011-10-01

    A low aspect ratio target family is designed in order to demonstrate the potential of ignition conditions of hydrogen isotopes on the LMJ by Shock Ignition without major modification of the facility i.e. for low laser induced damage on optics in the range of laser energy of 400-600 kJ. The shock ignition scheme is divided in two steps: first the compression of the fuel at low velocities and secondly the launch of strong shock allows to ignite the central hot spot. The presented work reports on the use of LMJ indirect drive laser hardware to compress the fuel at low implosion velocity in using a possible polar direct drive irradiation of the target. The ignition condition are produced from the launch of a bipolar strong converging shock by dedicated LMJ beams. A 1D robustness study is also performed with CHIC code for different target sizes and spike power and timing. The figure of merit is the bandwidth of the shock ignition window. We present a solution for a LMJ PDD laser illumination for the target compression and for the spike. We show first 2D CHIC simulations using this new PDD configuration. This strategy for implementation of PDD shock ignition on LMJ participate of a first proof of principle of shock ignition scheme in the frame of HiPER future reactor design.

  13. Ignition delay of combustible materials in normoxic equivalent environments

    Science.gov (United States)

    Sara McAllister; Carlos Fernandez-Pello; Gary Ruff; David Urban

    2009-01-01

    Material flammability is an important factor in determining the pressure and composition (fraction of oxygen and nitrogen) of the atmosphere in the habitable volume of exploration vehicles and habitats. The method chosen in this work to quantify the flammability of a material is by its ease of ignition. The ignition delay time was defined as the time it takes a...

  14. Recent progress on the Compact Ignition Tokamak (CIT)

    International Nuclear Information System (INIS)

    Ignat, D.W.

    1987-01-01

    This report describes work done on the Compact Ignition Tokamak (CIT), both at the Princeton Plasma Physics Laboratory (PPPL) and at other fusion laboratories in the United States. The goal of CIT is to reach ignition in a tokamak fusion device in the mid-1990's. Scientific and engineering features of the design are described, as well as projected cost and schedule

  15. 14 CFR 25.1165 - Engine ignition systems.

    Science.gov (United States)

    2010-01-01

    ... turbine powered airplane must be considered an essential electrical load. ... Engine ignition systems. (a) Each battery ignition system must be supplemented by a generator that is automatically available as an alternate source of electrical energy to allow continued engine operation if any...

  16. Ignition studies in support of the European High Power Laser ...

    Indian Academy of Sciences (India)

    The effects of different regions of the fusion target mixing prior to thermonuclear ignition have been investigated using the 1D Lagrangian radiation hydrodynamics simulation code HYADES. Results suggest that even low (few parts per million) levels of contamination of fuel by high-Z ion species may inhibit ignition due to.

  17. knock characteristics analysis of a supercharged spark ignition

    African Journals Online (AJOL)

    user

    and manufacturing of spark ignition engines with improved performance. Understanding factors influencing knock in spark ignition engines will help designers understand how to manage knock in engines. Various designs over the years have been introduced in internal combustion engines with the aim of improving.

  18. National Ignition Facility project acquisition plan

    International Nuclear Information System (INIS)

    Callaghan, R.W.

    1996-04-01

    The purpose of this National Ignition Facility Acquisition Plan is to describe the overall procurement strategy planned for the National Ignition Facility (NIF) Project. The scope of the plan describes the procurement activities and acquisition strategy for the following phases of the NIF Project, each of which receives either plant and capital equipment (PACE) or other project cost (OPC) funds: Title 1 and 2 design and Title 3 engineering (PACE); Optics manufacturing facilitization and pilot production (OPC); Convention facility construction (PACE); Procurement, installation, and acceptance testing of equipment (PACE); and Start-up (OPC). Activities that are part of the base Inertial Confinement Fusion (ICF) Program are not included in this plan. The University of California (UC), operating Lawrence Livermore National Laboratory (LLNL) and Los Alamos National Laboratory, and Lockheed-Martin, which operates Sandia National Laboratory (SNL) and the University of Rochester Laboratory for Laser Energetics (UR-LLE), will conduct the acquisition of needed products and services in support of their assigned responsibilities within the NIF Project structure in accordance with their prime contracts with the Department of Energy (DOE). LLNL, designated as the lead Laboratory, will have responsibility for all procurements required for construction, installation, activation, and startup of the NIF

  19. Overview of the compact ignition tokamak

    International Nuclear Information System (INIS)

    Flanagan, C.A.

    1986-01-01

    A national team has developed a baseline concept for a Compact Ignition Tokamak (CIT). The CIT mission is to achieve ignition and provide experimental capability to study the behavior of burning plasma. The design uses large magnetic fields on axis (about 10 T) and large plasma currents (about 9-10 MA). The magnet structure derives high strength from the use of a copper-Inconel composite plate design in the nose of region of the toroidal field (TF) coil and in the ohmic heating solenoid. Inertial cooling is used;liquid nitrogen temperatures are established at the beginning of each pulse. Capability is provided to operate either with a divertor or limiter based plasma. The design is very compact (1.32-m major radius, 0.43-m plasma radius), has 16 TF coils, and has 16 major horizontal access ports, about 30 cm by 80 cm, located between TF coils. The schedule is for a construction project to be authorized for the period FY 1988-93

  20. Safety overview of the National Ignition Facility

    International Nuclear Information System (INIS)

    Brereton, S.J.; McLouth, L.; Odell, B.; Singh, M.; Tobin, M.; Trent, M.

    1996-01-01

    The National Ignition Facility (NIF) is a proposed US Department of Energy inertial confinement laser fusion facility. The candidate sites for locating the NIF are: Los Alamos National Laboratory, Sandia National Laboratory, the Nevada Test Site, and Lawrence Livermore National Laboratory (LLNL), the preferred site. The NIF will operate by focusing 192 laser beams onto a tiny deuterium- tritium target located at the center of a spherical target chamber. The NIF mission is to achieve inertial confinement fusion (ICF) ignition, access physical conditions in matter of interest to nuclear weapons physics, provide an above ground simulation capability for nuclear weapons effects testing, and contribute to the development of inertial fusion for electrical power production. The NIF has been classified as a radiological, low hazard facility on the basis of a preliminary hazards analysis and according to the DOE methodology for facility classification. This requires that a safety analysis be prepared under DOE Order 5481.1B, Safety Analysis and Review System. A draft Preliminary Safety Analysis Report (PSAR) has been written, and this will be finalized later in 1996. This paper summarizes the safety issues associated with the operation of the NIF. It provides an overview of the hazards, estimates maximum routine and accidental exposures for the preferred site of LLNL, and concludes that the risks from NIF operations are low

  1. Progress toward ignition with direct-drive

    International Nuclear Information System (INIS)

    McCrory, R.L. Jr.

    1993-01-01

    The goal of the direct-drive laser fusion program is to validate high-performance, direct-drive targets. A decision to construct a direct-drive capability on the proposed 1-to-2-MJ National Ignition Facility (NIF) in the USA will be based on target physics experiments conducted on the OMEGA Upgrade laser system now under construction at the LLE. The OMEGA Upgrade will provide up to 30 kJ of UV laser energy in precisely shaped pulses with irradiation nonuniformities in the range of 1 pc. to 2 pc. An understanding and predictive capability for direct-drive targets are required to assure reliable estimates of ignition and gain with 1-2 MJ of incident laser energy. This paper reviews the target physics efforts currently underway to assess the critical physics issues of direct-drive ICF; plans for the experimental program to be carried out on the OMEGA Upgrade laser are also presented. 14 figs., 15 refs

  2. National Ignition Facility project acquisition plan

    Energy Technology Data Exchange (ETDEWEB)

    Callaghan, R.W.

    1996-04-01

    The purpose of this National Ignition Facility Acquisition Plan is to describe the overall procurement strategy planned for the National Ignition Facility (NIF) Project. The scope of the plan describes the procurement activities and acquisition strategy for the following phases of the NIF Project, each of which receives either plant and capital equipment (PACE) or other project cost (OPC) funds: Title 1 and 2 design and Title 3 engineering (PACE); Optics manufacturing facilitization and pilot production (OPC); Convention facility construction (PACE); Procurement, installation, and acceptance testing of equipment (PACE); and Start-up (OPC). Activities that are part of the base Inertial Confinement Fusion (ICF) Program are not included in this plan. The University of California (UC), operating Lawrence Livermore National Laboratory (LLNL) and Los Alamos National Laboratory, and Lockheed-Martin, which operates Sandia National Laboratory (SNL) and the University of Rochester Laboratory for Laser Energetics (UR-LLE), will conduct the acquisition of needed products and services in support of their assigned responsibilities within the NIF Project structure in accordance with their prime contracts with the Department of Energy (DOE). LLNL, designated as the lead Laboratory, will have responsibility for all procurements required for construction, installation, activation, and startup of the NIF.

  3. PBXN-9 Ignition Kinetics and Deflagration Rates

    Energy Technology Data Exchange (ETDEWEB)

    Glascoe, E; Maienschein, J; Burnham, A; Koerner, J; Hsu, P; Wemhoff, A

    2008-04-24

    The ignition kinetics and deflagration rates of PBXN-9 were measured using specially designed instruments at LLNL and compared with previous work on similar HMX based materials. Ignition kinetics were measured based on the One Dimensional Time-to-Explosion combined with ALE3D modeling. Results of these experiments indicate that PBXN-9 behaves much like other HMX based materials (i.e. LX-04, LX-07, LX-10 and PBX-9501) and the dominant factor in these experiments is the type of explosive, not the type of binder/plasticizer. In contrast, the deflagration behavior of PBXN-9 is quite different from similar high weight percent HMX based materials (i.e LX-10, LX-07 and PBX-9501). PBXN-9 burns in a laminar manner over the full pressure range studied (0-310 MPa) unlike LX-10, LX-07, and PBX-9501. The difference in deflagration behavior is attributed to the nature of the binder/plasticizer alone or in conjunction with the volume of binder present in PBXN-9.

  4. Spontaneous Tumor Lysis Syndrome

    Directory of Open Access Journals (Sweden)

    Alicia C. Weeks MD

    2015-08-01

    Full Text Available Tumor lysis syndrome (TLS is a known complication of malignancy and its treatment. The incidence varies on malignancy type, but is most common with hematologic neoplasms during cytotoxic treatment. Spontaneous TLS is thought to be rare. This case study is of a 62-year-old female admitted with multisystem organ failure, with subsequent diagnosis of aggressive B cell lymphoma. On admission, laboratory abnormalities included renal failure, elevated uric acid (20.7 mg/dL, and 3+ amorphous urates on urinalysis. Oliguric renal failure persisted despite aggressive hydration and diuretic use, requiring initiation of hemodialysis prior to chemotherapy. Antihyperuricemic therapy and hemodialysis were used to resolve hyperuricemia. However, due to multisystem organ dysfunction syndrome with extremely poor prognosis, the patient ultimately expired in the setting of a terminal ventilator wean. Although our patient did not meet current TLS criteria, she required hemodialysis due to uric acid nephropathy, a complication of TLS. This poses the clinical question of whether adequate diagnostic criteria exist for spontaneous TLS and if the lack of currently accepted guidelines has resulted in the underestimation of its incidence. Allopurinol and rasburicase are commonly used for prevention and treatment of TLS. Although both drugs decrease uric acid levels, allopurinol mechanistically prevents formation of the substrate rasburicase acts to solubilize. These drugs were administered together in our patient, although no established guidelines recommend combined use. This raises the clinical question of whether combined therapy is truly beneficial or, conversely, detrimental to patient outcomes.

  5. Ignition in net for different energy confinement time scalings

    International Nuclear Information System (INIS)

    Johner, J.; Prevot, F.

    1988-06-01

    A zero-dimensional profile dependent model is used to assess the feasibility of ignition in the extended version of NET. Five recent scalings for the energy confinement time (Goldston, Kaye All, Kaye Big, Shimomura-Odajima, Rebut-Lallia) are compared in the frame of two different scenarii, i.e., H-mode with a flat density profile or L-mode with a peaked density profile. For the flat density H-mode case, ignition is accessible with none of the scalings except Rebut-Lallia's. For the peaked density L-mode case, ignition is accessible with none of the scalings except Rebut-Lallia's. For the two Kaye's scalings, ignition is forbidden in H-mode even with the peaked density profile. For the Rebut-Lallia scaling, ignition is allowed in L-mode even with the flat density profile

  6. Variable valve timing in a homogenous charge compression ignition engine

    Science.gov (United States)

    Lawrence, Keith E.; Faletti, James J.; Funke, Steven J.; Maloney, Ronald P.

    2004-08-03

    The present invention relates generally to the field of homogenous charge compression ignition engines, in which fuel is injected when the cylinder piston is relatively close to the bottom dead center position for its compression stroke. The fuel mixes with air in the cylinder during the compression stroke to create a relatively lean homogeneous mixture that preferably ignites when the piston is relatively close to the top dead center position. However, if the ignition event occurs either earlier or later than desired, lowered performance, engine misfire, or even engine damage, can result. The present invention utilizes internal exhaust gas recirculation and/or compression ratio control to control the timing of ignition events and combustion duration in homogeneous charge compression ignition engines. Thus, at least one electro-hydraulic assist actuator is provided that is capable of mechanically engaging at least one cam actuated intake and/or exhaust valve.

  7. Study of the shock ignition scheme in inertial confinement fusion

    International Nuclear Information System (INIS)

    Lafon, M.

    2011-01-01

    The Shock Ignition (SI) scheme is an alternative to classical ignition schemes in Inertial Confinement Fusion. Its singularity relies on the relaxation of constraints during the compression phase and fulfilment of ignition conditions by launching a short and intense laser pulse (∼500 ps, ∼300 TW) on the pre-assembled fuel at the end of the implosion.In this thesis, it has been established that the SI process leads to a non-isobaric fuel configuration at the ignition time thus modifying the ignition criteria of Deuterium-Tritium (DT) against the conventional schemes. A gain model has been developed and gain curves have been inferred and numerically validated. This hydrodynamical modeling has demonstrated that the SI process allows higher gain and lower ignition energy threshold than conventional ignition due to the high hot spot pressure at ignition time resulting from the ignitor shock propagation.The radiative hydrodynamic CHIC code developed at the CELIA laboratory has been used to determine parametric dependences describing the optimal conditions for target design leading to ignition. These numerical studies have enlightened the potential of SI with regards to saving up laser energy, obtain high gains but also to safety margins and ignition robustness.Finally, the results of the first SI experiments performed in spherical geometry on the OMEGA laser facility (NY, USA) are presented. An interpretation of the experimental data is proposed from mono and bidimensional hydrodynamic simulations. Then, different trails are explored to account for the differences observed between experimental and numerical data and alternative solutions to improve performances are suggested. (author) [fr

  8. Natural Tendency towards Beauty in Humans: Evidence from Binocular Rivalry.

    Science.gov (United States)

    Mo, Ce; Xia, Tiansheng; Qin, Kaixin; Mo, Lei

    2016-01-01

    Although human preference for beauty is common and compelling in daily life, it remains unknown whether such preference is essentially subserved by social cognitive demands or natural tendency towards beauty encoded in the human mind intrinsically. Here we demonstrate experimentally that humans automatically exhibit preference for visual and moral beauty without explicit cognitive efforts. Using a binocular rivalry paradigm, we identified enhanced gender-independent perceptual dominance for physically attractive persons, and the results suggested universal preference for visual beauty based on perceivable forms. Moreover, we also identified perceptual dominance enhancement for characters associated with virtuous descriptions after controlling for facial attractiveness and vigilance-related attention effects, which suggested a similar implicit preference for moral beauty conveyed in prosocial behaviours. Our findings show that behavioural preference for beauty is driven by an inherent natural tendency towards beauty in humans rather than explicit social cognitive processes.

  9. Conceptions and tendencies of age discrimination and attitudes

    Directory of Open Access Journals (Sweden)

    Fredrik Nils Christian Snellman

    2013-11-01

    Full Text Available This study aims to access and explore tendencies in the conceptualization of age discrimination and the perceived attitudes towards older people in regions of Finland and Sweden. The analysis draws on GERDA survey data (GErontological Regional DAtabase, a repeated cross-sectional study in which data was collected in 2005 and 2010. The results indicate that the conceptions of age discrimination are changing in a positive direction, which is contrary to results shown in the Eurobarometer. On the basis of balance coefficients we show that conceived attitudes towards older people are changing as well, except for individuals in some sub-groups. We discuss the role of political rhetoric in relation to ageing awareness, the (nonindividualization of society and the negotiation of age relations as tentative interpretations that strongly challenge the observed empirical tendencies.

  10. Cooperative Evolutionary Game and Applications in Construction Supplier Tendency

    Directory of Open Access Journals (Sweden)

    Qianqian Shi

    2018-01-01

    Full Text Available Major construction projects have a great influence on the national economy and society, wherein cooperative relationship between construction suppliers plays an increasingly significant role in the overall supply chain system. However, the relationships between suppliers are noncontractual, multistage, dynamic, and complicated. To gain a deeper insight into the suppliers’ cooperative relationships, an evolutionary game model is developed to explore the cooperation tendency of multisuppliers. A replicator dynamic system is further formulated to investigate the evolutionary stable strategies of multisuppliers. Then, fourteen “when-then” type scenarios are concluded and classified into six different evolutionary tracks. Meanwhile, the critical influencing factors are identified. The results show that the suppliers’ production capacity, owner-supplier contract, and the owner’s incentive mechanism influence the cooperation tendency of suppliers directly. The managerial implications contribute to insightful references for a more stable cooperative relationship between the owner and suppliers.

  11. Physics-based modeling of live wildland fuel ignition experiments in the Forced Ignition and Flame Spread Test apparatus

    Science.gov (United States)

    C. Anand; B. Shotorban; S. Mahalingam; S. McAllister; D. R. Weise

    2017-01-01

    A computational study was performed to improve our understanding of the ignition of live fuel in the forced ignition and flame spread test apparatus, a setup where the impact of the heating mode is investigated by subjecting the fuel to forced convection and radiation. An improvement was first made in the physics-based model WFDS where the fuel is treated as fixed...

  12. Development tendencies in cycle chemistry of fossil fired power plants

    Energy Technology Data Exchange (ETDEWEB)

    Daucik, K. [Skaerbaekvaerket, Faelleskemikerne, Fredericia (Denmark)

    1996-12-01

    The development of cycle chemistry during the past 50 years is described and the main tendencies are pointed out. Improvement of cycle purity is the most dominant evolution, which introduces more freedom with respect to pH and redox potential control. Units with once-through boilers have profited most from this development. The development of boiler water chemistry in drum boilers also tends towards higher purity and less chemicals, which raises possibilities for oxygenated treatment. (au)

  13. Development and validation of the Impulse Buying Tendency Scale.

    Science.gov (United States)

    Weun, S; Jones, M A; Beatty, S E

    1998-06-01

    Previous research suggests that individuals vary in their proclivity to purchase products on impulse. This paper presents the results of four studies (Study 1, n = 212; Study 2, n = 152; Study 3, n = 124; and Study 4, n = 550) designed to develop and validate the Impulse Buying Tendency Scale. Data from the first three studies indicate that the scale is unidimensional and internally consistent. The third study provides evidence supporting convergent validity and discriminant validity and the fourth of predictive validity.

  14. Tendency to Message Delivery in Internet Viral Marketing

    OpenAIRE

    Mostafa Ghazizadeh; Ahmad Sardari; Seyyed Reza Shojaee; Mehdi Samizadeh

    2011-01-01

    Abstract The main goal of this research is to review and determine the factors associated with tendency to forward the marketing messages in viral marketing plans of Fast-food industries. In other words, in this study, the effects of three critical determinants, i.e. commercial intention, attractiveness, and media richness have been examined on receivers' intention to forward marketing message in Tehran, Isfahan and Shiraz. Findings imply that receivers’ attitude toward the message has pos...

  15. Foodservice tendencies and tourists’ lifestyle: new trends in tourism

    OpenAIRE

    Sarmento, E.; Loureiro, S.; Martins, R.

    2017-01-01

    Food and catering are an ever-changing industry that influences, and it is influenced by the lives of millions of people in the world. The products and services provided by this business are constantly adapting to the influencing variables that are on-growing. Actually, consumers create the tendencies and are incredibly demanding on what they want and do not want. Tourists as consumers seek products that can adapt to your lifestyle. Therefore, in the foodservice field, restaurants are require...

  16. Investigating Psychosocial Causes of the Tendency for Facial Cosmetic Surgery.

    Science.gov (United States)

    Babadi, Hadis; Fereidooni-Moghadam, Malek; Dashtbozorgi, Bahman; Cheraghian, Bahman

    2018-01-22

    Despite the importance of cosmetic surgery in improving body image and promoting individuals' physical and mental health, it is accompanied with some physical, mental, and economic problems, because it is an invasive procedure. Considering such extensive consequences and given the rising demand for performing such surgeries, it is essential to consider programs for reducing such requests. The present study aimed to investigate the psychosocial causes of the tendency for facial cosmetic surgery in patients referred to medical centers in Ahvaz in 2016-2017. This study was conducted on 385 facial cosmetic surgery applicants referred to medical centers in Ahvaz and were selected using a sequential non-probability sampling method. The data collection tool was a questionnaire divided into two sections namely: (1) demographic questions and (2) a questionnaire on the psychosocial causes of the tendency for facial cosmetic surgery. The mean scores of the psychological and social causes of the tendency for facial cosmetic surgery were 4.46 (SD = 1.67) and 3.44 (SD = 2.57), respectively. "Being interested in being beautiful" was the most frequent positive response of the participants regarding the cause of tending to undergo facial cosmetic surgery (88.6%) and the least frequent response was estimated to be 35.1% for the "inappropriate psychological state" cause. The results of this study showed that psychological factors affected the participants' tendency for facial cosmetic surgery more than social factors. Determining and identifying such psychological pressures and providing individual training and psychological support can prevent individuals from undergoing facial cosmetic surgery. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

  17. Tendencies of the development of the Lithuanian criminal procedure law

    OpenAIRE

    Ažubalytė, Rima

    2010-01-01

    The tendencies of the development of the Lithuanian criminal procedure within the recent twenty years, after Lithuania has regained its independence, are analyzed in the present article. The main factors which influence lawmaking in the sphere of criminal procedure as well as in the application of the criminal procedure norms are discussed. The constitutional imperatives and the human rights, fixed in international and the European Union agreements as the main factors determining the evolutio...

  18. Development and Validation of the Behavioral Tendencies Questionnaire.

    Directory of Open Access Journals (Sweden)

    Nicholas T Van Dam

    Full Text Available At a fundamental level, taxonomy of behavior and behavioral tendencies can be described in terms of approach, avoid, or equivocate (i.e., neither approach nor avoid. While there are numerous theories of personality, temperament, and character, few seem to take advantage of parsimonious taxonomy. The present study sought to implement this taxonomy by creating a questionnaire based on a categorization of behavioral temperaments/tendencies first identified in Buddhist accounts over fifteen hundred years ago. Items were developed using historical and contemporary texts of the behavioral temperaments, described as "Greedy/Faithful", "Aversive/Discerning", and "Deluded/Speculative". To both maintain this categorical typology and benefit from the advantageous properties of forced-choice response format (e.g., reduction of response biases, binary pairwise preferences for items were modeled using Latent Class Analysis (LCA. One sample (n1 = 394 was used to estimate the item parameters, and the second sample (n2 = 504 was used to classify the participants using the established parameters and cross-validate the classification against multiple other measures. The cross-validated measure exhibited good nomothetic span (construct-consistent relationships with related measures that seemed to corroborate the ideas present in the original Buddhist source documents. The final 13-block questionnaire created from the best performing items (the Behavioral Tendencies Questionnaire or BTQ is a psychometrically valid questionnaire that is historically consistent, based in behavioral tendencies, and promises practical and clinical utility particularly in settings that teach and study meditation practices such as Mindfulness Based Stress Reduction (MBSR.

  19. Individual variability in behavioral flexibility predicts sign-tracking tendency

    Directory of Open Access Journals (Sweden)

    Helen M Nasser

    2015-11-01

    Full Text Available Sign-tracking rats show heightened sensitivity to food- and drug-associated cues, which serve as strong incentives for driving reward seeking. We hypothesized that this enhanced incentive drive is accompanied by an inflexibility when incentive value changes. To examine this we tested rats in Pavlovian outcome devaluation or second-order conditioning prior to the assessment of sign-tracking tendency. To assess behavioral flexibility we trained rats to associate a light with a food outcome. After the food was devalued by pairing with illness, we measured conditioned responding to the light during an outcome devaluation probe test. The level of conditioned responding during outcome devaluation probe test correlated with the rats’ subsequent tracking tendency, with sign-tracking rats failing to suppress conditioned responding to the light after outcome devaluation. To assess Pavlovian incentive learning, we trained rats on first-order (CS+, CS- and second-order (SOCS+, SOCS- discriminations. After second-order conditioning, we measured conditioned responding to the second-order cues during a probe test. Second-order conditioning was observed in all rats regardless of tracking tendency. The behavioral inflexibility of sign-trackers has potential relevance for understanding individual variation in vulnerability to drug addiction.

  20. Cultural influence on directional tendencies in children's drawing.

    Science.gov (United States)

    Portex, Marine; Foulin, Jean-Noël; Troadec, Bertrand

    2017-09-01

    The present study was aimed at investigating how print experience as a cultural factor influences directional tendencies in children's drawing in the interplay with biomechanical (hand), syntactic (shape orientation) and semantic (shape meaning) factors. Eighty-eight right-handed children from three literacy/age groups (preliterate, first graders and third graders) had to copy a geometrical shape adapted from the Rey-Osterrieth complex figure. The shape was presented alternatively leftward and rightward, while using both dominant (right) and non-dominant (left) hands. Directional tendencies were assessed regarding directionality of drawing movements at global, intermediate and local levels and deviation error in centre line bisection. Results show a global improvement of drawing quality and strategies across groups and an advantage for the dominant right hand from 6 years onward. Regarding directional tendencies, a reinforcement of a congruency effect between conditions and writing direction was found from preliterates to third graders. These results are discussed as a cultural embodiment process and have implications for psychological testing.

  1. Individual Differences in Zhong-Yong tendency and Processing Capacity

    Directory of Open Access Journals (Sweden)

    Ting-Yun eChang

    2014-11-01

    Full Text Available The present study investigated how an individual’s Zhong-Yong tendency is related to his/her perceptual processing capacity. In two experiments, participants completed a Zhong-Yong Thinking Style Scale and performed a redundant-target detection task. Processing capacity was assessed with a nonparametric approach (systems factorial technology, SFT and a parametric (linear ballistic accumulator model, LBA approach. Results converged to suggest a positive correlation between Zhong-Yong tendency and processing capacity. High middle-way thinkers had larger processing capacity in multiple-signal processing compared with low middle-way thinkers, indicating that they processed information more efficiently and in an integrated fashion. Zhong-Yong tendency positively correlates with the processing capacity. These findings suggest that the individual differences in processing capacity can account for the reasons why high middle-way thinkers tend to adopt a global and flexible processing strategy to deal with the external world. Furthermore, the influence of culturally dictated thinking style on cognition can be revealed in a perception task.

  2. Spontaneous Intracranial Hypotension

    International Nuclear Information System (INIS)

    Joash, Dr.

    2015-01-01

    Epidemiology is not only rare but an important cause of new daily persistent headaches among young & middle age individuals. The Etiology & Pathogenesis is generally caused by spinal CSF leak. Precise cause remains largely unknown, underlying structural weakness of spinal meninges is suspected. There are several MR Signs of Intracranial Hypotension that include:- diffuse pachymeningeal (dural) enhancement; bilateral subdural, effusion/hematomas; Downward displacement of brain; enlargement of pituitary gland; Engorgement of dural venous sinuses; prominence of spinal epidural venous plexus and Venous sinus thrombosis & isolated cortical vein thrombosis. The sum of volumes of intracranial blood, CSF & cerebral tissue must remain constant in an intact cranium. Treatment in Many cases can be resolved spontaneously or by use Conservative approach that include bed rest, oral hydration, caffeine intake and use of abdominal binder. Imaging Modalities for Detection of CSF leakage include CT myelography, Radioisotope cisternography, MR myelography, MR imaging and Intrathecal Gd-enhanced MR

  3. Spontaneous wave packet reduction

    International Nuclear Information System (INIS)

    Ghirardi, G.C.

    1994-06-01

    There are taken into account the main conceptual difficulties met by standard quantum mechanics in dealing with physical processes involving macroscopic system. It is stressed how J.A.Wheeler's remarks and lucid analysis have been relevant to pinpoint and to bring to its extreme consequences the puzzling aspects of quantum phenomena. It is shown how the recently proposed models of spontaneous dynamical reduction represent a consistent way to overcome the conceptual difficulties of the standard theory. Obviously, many nontrivial problems remain open, the first and more relevant one being that of generalizing the model theories considered to the relativistic case. This is the challenge of the dynamical reduction program. 43 refs, 2 figs

  4. Preparing for polar-drive ignition on the National Ignition Facility

    Directory of Open Access Journals (Sweden)

    McKenty P.W.

    2013-11-01

    Full Text Available The implementation of polar drive (PD at the National Ignition Facility (NIF will enable the execution of direct-drive implosions while the facility is configured for x-ray drive. The Laboratory for Laser Energetics (LLE, in collaboration with LLNL, LANL and GA, is implementing PD on the NIF. LLE has designed and participates in the use of PD implosions for diagnostic commissioning on the NIF. LLE has an active experimental campaign to develop PD in both warm and cryogenic target experiments on OMEGA. LLE and its partners are developing a Polar Drive Project Execution Plan, which will provide a detailed outline of the requirements, resources, and timetable leading to PD-ignition experiments on the NIF.

  5. Application of Alcohols to Dual - Fuel Feeding the Spark-Ignition and Self-Ignition Engines

    Directory of Open Access Journals (Sweden)

    Stelmasiak Zdzisław

    2014-10-01

    Full Text Available This paper concerns analysis of possible use of alcohols for the feeding of self - ignition and spark-ignition engines operating in a dual- fuel mode, i.e. simultaneously combusting alcohol and diesel oil or alcohol and petrol. Issues associated with the requirements for application of bio-fuels were presented with taking into account National Index Targets, bio-ethanol production methods and dynamics of its production worldwide and in Poland. Te considerations are illustrated by results of the tests on spark- ignition and self- ignition engines fed with two fuels: petrol and methanol or diesel oil and methanol, respectively. Te tests were carried out on a 1100 MPI Fiat four- cylinder engine with multi-point injection and a prototype collector fitted with additional injectors in each cylinder. Te other tested engine was a SW 680 six- cylinder direct- injection diesel engine. Influence of a methanol addition on basic operational parameters of the engines and exhaust gas toxicity were analyzed. Te tests showed a favourable influence of methanol on combustion process of traditional fuels and on some operational parameters of engines. An addition of methanol resulted in a distinct rise of total efficiency of both types of engines at maintained output parameters (maximum power and torque. In the same time a radical drop in content of hydrocarbons and nitrogen oxides in exhaust gas was observed at high shares of methanol in feeding dose of ZI (petrol engine, and 2-3 fold lower smokiness in case of ZS (diesel engine. Among unfavourable phenomena, a rather insignificant rise of CO and NOx content for ZI engine, and THC and NOx - for ZS engine, should be numbered. It requires to carry out further research on optimum control parameters of the engines. Conclusions drawn from this work may be used for implementation of bio-fuels to feeding the combustion engines.

  6. Fuel quantity modulation in pilot ignited engines

    Science.gov (United States)

    May, Andrew

    2006-05-16

    An engine system includes a first fuel regulator adapted to control an amount of a first fuel supplied to the engine, a second fuel regulator adapted to control an amount of a second fuel supplied to the engine concurrently with the first fuel being supplied to the engine, and a controller coupled to at least the second fuel regulator. The controller is adapted to determine the amount of the second fuel supplied to the engine in a relationship to the amount of the first fuel supplied to the engine to operate in igniting the first fuel at a specified time in steady state engine operation and adapted to determine the amount of the second fuel supplied to the engine in a manner different from the relationship at steady state engine operation in transient engine operation.

  7. Instrumentation and controls of an ignited tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Becraft, W.R.; Golzy, J.; Houlberg, W.A.; Kukielka, C.A.; Onega R.J.; Raju, G.V.S.; Stone, R.S.

    1980-10-01

    The instrumentation and controls (I and C) of an ignited plasma magnetically confined in a tokamak configuration needs increased emphasis in the following areas: (1) physics implications for control; (2) plasma shaping/position control; and (3) control to prevent disruptive instabilities. This document reports on the FY 1979 efforts in these and other areas. Also presented are discusssions in the areas of: (1) diagnostics suitable for the Engineering Test Facility (ETF); and (2) future research and development (R and D) needs. The appendices focus attention on some preliminary ideas about the measurement of the deuteron-triton (D-T) ratio in the plasma, synchrotron radiation, and divertor control. Finally, an appendix documenting the thermal consequences to the first wall of a MPD is presented.

  8. National Ignition Facility environmental protection systems

    International Nuclear Information System (INIS)

    Mintz, J.M.; Reitz, T.C.; Tobin, M.T.

    1994-06-01

    The conceptual design of Environmental Protection Systems (EPS) for the National Ignition Facility (NIF) is described. These systems encompass tritium and activated debris handling, chamber, debris shield and general decontamination, neutron and gamma monitoring, and radioactive, hazardous and mixed waste handling. Key performance specifications met by EPS designs include limiting the tritium inventory to 300 Ci and total tritium release from NIF facilities to less than 10 Ci/yr. Total radiation doses attributable to NIF shall remain below 10 mrem/yr for any member of the general public and 500 mrem/yr for NIF staff. ALARA-based design features and operational procedures will, in most cases, result in much lower measured exposures. Waste minimization, improved cycle time and reduced exposures all result from the proposed CO2 robotic arm cleaning and decontamination system, while effective tritium control is achieved through a modern system design based on double containment and the proven detritiation technology

  9. Treatment of Gait Ignition Failure with Ropinirole

    Directory of Open Access Journals (Sweden)

    Alexis N. Cohen-Oram

    2014-10-01

    Full Text Available Gait ignition failure (GIF is a syndrome characterized by hesitation or inability to initiate gait from a static position. It may occur in a variety of conditions, including normal pressure hydrocephalus, subcortical vascular disease, parkinsonian syndromes and a variety of focal lesions. Previous information on the treatment of GIF has been primarily anecdotal, but there have been a few reports of response to dopamine agonists. We report a 63-year-old man with anoxic encephalopathy who developed GIF nine years after the initial anoxic insult. The patient’s GIF responded robustly, albeit transiently, to ropinirole. MRI was unrevealing, but a positron emission tomography scan showed hypometabolism in the deep frontal ACA/MCA watershed area; this may have disconnected the basal ganglia from the motor cortex and/or interrupted dopaminergic mesocortical transmission. Our understanding of the pathophysiology and the treatment of GIF remains limited, but there may be at least a limited therapeutic role for dopamine agonists.

  10. Conceptual design of the National Ignition Facility

    International Nuclear Information System (INIS)

    Paisner, J.A.; Kumpan, S.A.; Lowdermilk, W.H.; Boyes, J.D.; Sorem, M.

    1995-01-01

    DOE commissioned a Conceptual Design Report (CDR) for the National Ignition Facility (NIF) in January 1993 as part of a Key Decision Zero (KDO), justification of Mission Need. Motivated by the progress to date by the Inertial Confinement Fusion (ICF) program in meeting the Nova Technical Contract goals established by the National Academy of Sciences in 1989, the Secretary requested a design using a solid-state laser driver operating at the third harmonic (0.35 μm) of neodymium (Nd) glass. The participating ICF laboratories signed a Memorandum of Agreement in August 1993, and established a Project organization, including a technical team from the Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Sandia National Laboratories (SNL), and the Laboratory for Laser Energetics at the University of Rochester. Since then, we completed the NIF conceptual design, based on standard construction at a generic DOE Defense Program's site, and issued a 7,000-page, 27-volume CDR in May 1994.2 Over the course of the conceptual design study, several other key documents were generated, including a Facilities Requirements Document, a Conceptual Design Scope and Plan, a Target Physics Design Document, a Laser Design Cost Basis Document, a Functional Requirements Document, an Experimental Plan for Indirect Drive Ignition, and a Preliminary Hazards Analysis (PHA) Document. DOE used the PHA to categorize the NIF as a low-hazard, non-nuclear facility. On October 21, 1994 the Secretary of Energy issued a Key Decision One (KD1) for the NIF, which approved the Project and authorized DOE to request Office of Management and Budget-approval for congressional line-item FY 1996 NIF funding for preliminary engineering design and for National Environmental Policy Act activities. In addition, the Secretary declared Livermore as the preferred site for constructing the NIF. The Project will cost approximately $1.1 billion and will be completed at the end of FY 2002

  11. Plasma diagnostics for the compact ignition tokamak

    International Nuclear Information System (INIS)

    Medley, S.S.; Young, K.M.

    1988-06-01

    The primary mission of the Compact Ignition Tokamak (CIT) is to study the physics of alpha-particle heating in an ignited D-T plasma. A burn time of about 10 /tau//sub E/ is projected in a divertor configuration with baseline machine design parameters of R=2.10 m, 1=0.65 m, b=1.30 m, I/sub p/=11 MA, B/sub T/=10 T and 10-20 MW of auxiliary rf heating. Plasma temperatures and density are expected to reach T/sub e/(O) /approximately/20 keV, T/sub i/(O) /approximately/30 keV, and n/sub e/(O) /approximately/ 1 /times/ 10 21 m/sup /minus/3/. The combined effects of restricted port access to the plasma, the presence of severe neutron and gamma radiation backgrounds, and the necessity for remote of in-cell components create challenging design problems for all of the conventional diagnostic associated with tokamak operations. In addition, new techniques must be developed to diagnose the evolution in space, time, and energy of the confined alpha distribution as well as potential plasma instabilities driven by collective alpha-particle effects. The design effort for CIT diagnostics is presently in the conceptual phase with activity being focused on the selection of a viable diagnostic set and the identification of essential research and development projects to support this process. A review of these design issues and other aspects impacting the selection of diagnostic techniques for the CIT experiment will be presented. 28 refs., 10 figs., 2 tabs

  12. Spontaneous compactification to homogeneous spaces

    International Nuclear Information System (INIS)

    Mourao, J.M.

    1988-01-01

    The spontaneous compactification of extra dimensions to compact homogeneous spaces is studied. The methods developed within the framework of coset space dimensional reduction scheme and the most general form of invariant metrics are used to find solutions of spontaneous compactification equations

  13. Screening for spontaneous preterm birth

    NARCIS (Netherlands)

    van Os, M.A.; van Dam, A.J.E.M.

    2015-01-01

    Preterm birth is the most important cause of perinatal morbidity and mortality worldwide. In this thesis studies on spontaneous preterm birth are presented. The main objective was to investigate the predictive capacity of mid-trimester cervical length measurement for spontaneous preterm birth in a

  14. Ignition in an Atomistic Model of Hydrogen Oxidation.

    Science.gov (United States)

    Alaghemandi, Mohammad; Newcomb, Lucas B; Green, Jason R

    2017-03-02

    Hydrogen is a potential substitute for fossil fuels that would reduce the combustive emission of carbon dioxide. However, the low ignition energy needed to initiate oxidation imposes constraints on the efficiency and safety of hydrogen-based technologies. Microscopic details of the combustion processes, ephemeral transient species, and complex reaction networks are necessary to control and optimize the use of hydrogen as a commercial fuel. Here, we report estimates of the ignition time of hydrogen-oxygen mixtures over a wide range of equivalence ratios from extensive reactive molecular dynamics simulations. These data show that the shortest ignition time corresponds to a fuel-lean mixture with an equivalence ratio of 0.5, where the number of hydrogen and oxygen molecules in the initial mixture are identical, in good agreement with a recent chemical kinetic model. We find two signatures in the simulation data precede ignition at pressures above 200 MPa. First, there is a peak in hydrogen peroxide that signals ignition is imminent in about 100 ps. Second, we find a strong anticorrelation between the ignition time and the rate of energy dissipation, suggesting the role of thermal feedback in stimulating ignition.

  15. A computational study of syngas auto-ignition characteristics at high-pressure and low-temperature conditions with thermal inhomogeneities

    KAUST Repository

    Pal, Pinaki

    2015-07-30

    A computational study was conducted to investigate the characteristics of auto-ignition in a syngas mixture at high-pressure and low-temperature conditions in the presence of thermal inhomogeneities. Highly resolved one-dimensional numerical simulations incorporating detailed chemistry and transport were performed. The temperature inhomogeneities were represented by a global sinusoidal temperature profile and a local Gaussian temperature spike (hot spot). Reaction front speed and front Damköhler number analyses were employed to characterise the propagating ignition front. In the presence of a global temperature gradient, the ignition behaviour shifted from spontaneous propagation (strong) to deflagrative (weak), as the initial mean temperature of the reactant mixture was lowered. A predictive Zel\\'dovich–Sankaran criterion to determine the transition from strong to weak ignition was validated for different parametric sets. At sufficiently low temperatures, the strong ignition regime was recovered due to faster passive scalar dissipation of the imposed thermal fluctuations relative to the reaction timescale, which was quantified by the mixing Damköhler number. In the presence of local hot spots, only deflagrative fronts were observed. However, the fraction of the reactant mixture consumed by the propagating front was found to increase as the initial mean temperature was lowered, thereby leading to more enhanced compression-heating of the end-gas. Passive scalar mixing was not found to be important for the hot spot cases considered. The parametric study confirmed that the relative magnitude of the Sankaran number translates accurately to the quantitative strength of the deflagration front in the overall ignition advancement. © 2015 Taylor & Francis

  16. Direct electrical arc ignition of hybrid rocket motors

    Science.gov (United States)

    Judson, Michael I., Jr.

    Hybrid rockets motors provide distinct safety advantages when compared to traditional liquid or solid propellant systems, due to the inherent stability and relative inertness of the propellants prior to established combustion. As a result of this inherent propellant stability, hybrid motors have historically proven difficult to ignite. State of the art hybrid igniter designs continue to require solid or liquid reactants distinct from the main propellants. These ignition methods however, reintroduce to the hybrid propulsion system the safety and complexity disadvantages associated with traditional liquid or solid propellants. The results of this study demonstrate the feasibility of a novel direct electrostatic arc ignition method for hybrid motors. A series of small prototype stand-alone thrusters demonstrating this technology were successfully designed and tested using Acrylonitrile Butadiene Styrene (ABS) plastic and Gaseous Oxygen (GOX) as propellants. Measurements of input voltage and current demonstrated that arc-ignition will occur using as little as 10 watts peak power and less than 5 joules total energy. The motor developed for the stand-alone small thruster was adapted as a gas generator to ignite a medium-scale hybrid rocket motor using nitrous oxide /and HTPB as propellants. Multiple consecutive ignitions were performed. A large data set as well as a collection of development `lessons learned' were compiled to guide future development and research. Since the completion of this original groundwork research, the concept has been developed into a reliable, operational igniter system for a 75mm hybrid motor using both gaseous oxygen and liquid nitrous oxide as oxidizers. A development map of the direct spark ignition concept is presented showing the flow of key lessons learned between this original work and later follow on development.

  17. Laser Ignition Technology for Bi-Propellant Rocket Engine Applications

    Science.gov (United States)

    Thomas, Matthew E.; Bossard, John A.; Early, Jim; Trinh, Huu; Dennis, Jay; Turner, James (Technical Monitor)

    2001-01-01

    The fiber optically coupled laser ignition approach summarized is under consideration for use in igniting bi-propellant rocket thrust chambers. This laser ignition approach is based on a novel dual pulse format capable of effectively increasing laser generated plasma life times up to 1000 % over conventional laser ignition methods. In the dual-pulse format tinder consideration here an initial laser pulse is used to generate a small plasma kernel. A second laser pulse that effectively irradiates the plasma kernel follows this pulse. Energy transfer into the kernel is much more efficient because of its absorption characteristics thereby allowing the kernel to develop into a much more effective ignition source for subsequent combustion processes. In this research effort both single and dual-pulse formats were evaluated in a small testbed rocket thrust chamber. The rocket chamber was designed to evaluate several bipropellant combinations. Optical access to the chamber was provided through small sapphire windows. Test results from gaseous oxygen (GOx) and RP-1 propellants are presented here. Several variables were evaluated during the test program, including spark location, pulse timing, and relative pulse energy. These variables were evaluated in an effort to identify the conditions in which laser ignition of bi-propellants is feasible. Preliminary results and analysis indicate that this laser ignition approach may provide superior ignition performance relative to squib and torch igniters, while simultaneously eliminating some of the logistical issues associated with these systems. Further research focused on enhancing the system robustness, multiplexing, and window durability/cleaning and fiber optic enhancements is in progress.

  18. Spontaneous Pneumomediastinum: Hamman Syndrome

    Directory of Open Access Journals (Sweden)

    Tushank Chadha, BS

    2018-04-01

    significant fat stranding. The image also showed an intraluminal stent traversing the gastric antrum and gastric pylorus with no indication of obstruction. Circumferential mural thickening of the gastric antrum and body were consistent with the patient’s history of gastric adenocarcinoma. The shotty perigastric lymph nodes with associated fat stranding, along the greater curvature of the distal gastric body suggested local regional nodal metastases and possible peritoneal carcinomatosis. The thoracic CT scans showed extensive pneumomediastinum that tracked into the soft tissues of the neck, which given the history of vomiting also raised concern for esophageal perforation. There was still no evidence of mediastinal abscess or fat stranding. Additionally, a left subclavian vein port catheter, which terminates with tip at the cavoatrial junction of the superior vena cava can also be seen on the image. Discussion: Spontaneous Pneumomediastinum, also known as Hamman syndrome, is defined by the uncommon incidence of free air in the mediastinum due to the bursting of alveoli, as a result of extended spells of shouting, coughing, or vomiting.1,2 The condition is diagnosed when a clear cause (aerodigestive rupture, barotrauma, infection secondary to gas-forming organisms3 for pneumomediastinum cannot be clearly identified on diagnostic studies. Macklin and Macklin were the first to note the pathogenesis of the syndrome and explained that the common denominator to spontaneous pneumomediastinum was that increased alveolar pressure leads to alveolar rupture.3 Common clinical findings for spontaneous pneumomediastinum include: chest pain, dyspnea, cough, and emesis.4 The condition is not always readily recognized on initial presentation in part for its rare incidence, estimated to be approximately 1 in every 44,500 ED patients3and also because of the non-specific presenting symptoms. For this patient, there was no clear singular cause, and therefore she received care for spontaneous

  19. STUDY OF CHIP IGNITION AND CHIP MORPHOLOGY AFTER MILLING OF MAGNESIUM ALLOYS

    Directory of Open Access Journals (Sweden)

    Ireneusz Zagórski

    2016-12-01

    Full Text Available The paper analyses the impact of specified technological parameters of milling (vc, fz, ap on time to ignition. Stages leading to chip ignition were analysed. Metallographic images of magnesium chip were presented. No significant difference was observed in time to ignition in different chip fractions. Moreover, the surface of chips was free of products of ignition and signs of strong oxidation.

  20. Reporting central tendencies of chamber measured surface emission and oxidation.

    Science.gov (United States)

    Abichou, Tarek; Clark, Jeremy; Chanton, Jeffery

    2011-05-01

    Methane emissions, concentrations, and oxidation were measured on eleven MSW landfills in eleven states spanning from California to Pennsylvania during the three year study. The flux measurements were performed using a static chamber technique. Initial concentration samples were collected immediately after placement of the flux chamber. Oxidation of the emitted methane was evaluated using stable isotope techniques. When reporting overall surface emissions and percent oxidation for a landfill cover, central tendencies are typically used to report "averages" of the collected data. The objective of this study was to determine the best way to determine and report central tendencies. Results showed that 89% of the data sets of collected surface flux have lognormal distributions, 83% of the surface concentration data sets are also lognormal. Sixty seven percent (67%) of the isotope measured percent oxidation data sets are normally distributed. The distribution of data for all eleven landfills provides insight of the central tendencies of emissions, concentrations, and percent oxidation. When reporting the "average" measurement for both flux and concentration data collected at the surface of a landfill, statistical analyses provided insight supporting the use of the geometric mean. But the arithmetic mean can accurately represent the percent oxidation, as measured with the stable isotope technique. We examined correlations between surface CH(4) emissions and surface air CH(4) concentrations. Correlation of the concentration and flux values using the geometric mean proved to be a good fit (R(2)=0.86), indicating that surface scans are a good way of identifying locations of high emissions. Copyright © 2010 Elsevier Ltd. All rights reserved.

  1. Relating the octane numbers of fuels to ignition delay times measured in an ignition quality tester (IQT)

    KAUST Repository

    Naser, Nimal

    2016-09-21

    A methodology for estimating the octane index (OI), the research octane number (RON) and the motor octane number (MON) using ignition delay times from a constant volume combustion chamber with liquid fuel injection is proposed by adopting an ignition quality tester. A baseline data of ignition delay times were determined using an ignition quality tester at a charge pressure of 21.3 bar between 770 and 850 K and an equivalence ratio of 0.7 for various primary reference fuels (PRFs, mixtures of isooctane and n-heptane). Our methodology was developed using ignition delay times for toluene reference fuels (mixtures of toluene and n-heptane). A correlation between the OI and the ignition delay time at the initial charge temperature enabled the OI of non-PRFs to be predicted at specified temperatures. The methodology was validated using ignition delay times for toluene primary reference fuels (ternary mixtures of toluene, iso-octane, and n-heptane), fuels for advanced combustion engines (FACE) gasolines, and certification gasolines. Using this methodology, the RON, the MON, and the octane sensitivity were estimated in agreement with values obtained from standard test methods. A correlation between derived cetane number and RON is also provided. (C) 2016 Elsevier Ltd. All rights reserved.

  2. [Appearance of psychopathic tendencies among children and adolescents].

    Science.gov (United States)

    Pataky, Nóra; Körmendi, Attila

    2010-01-01

    There has been a growing body of researches about psychopathic tendencies appearing among children and adolescents. First generation studies differentiated psychopathic constellation from conduct problems in childhood and pointed out that the presence of these traits predict unpleasant therapeutic prognosis and is partly independent from quality of parenting. The factor structure of constellation is similar to the factor structure of adult psychopaths. Surveying the structure became clear that C/U traits are the core of the child and adolescent psychopathic constellation. This paper summarize results of empirical studies connected to C/U traits among children and adolescents. We introduce debatable questions about child and adolescent psychopathic traits and connected empirical studies.

  3. Spontaneous breaking of supersymmetry

    Energy Technology Data Exchange (ETDEWEB)

    Zumino, B.

    1981-12-01

    There has been recently a revival of interest in supersymmetric gauge theories, stimulated by the hope that supersymmetry might help in clarifying some of the questions which remain unanswered in the so called Grand Unified Theories and in particular the gauge hierarchy problem. In a Grand Unified Theory one has two widely different mass scales: the unification mass M approx. = 10/sup 15/GeV at which the unification group (e.g. SU(5)) breaks down to SU(3) x SU(2) x U(1) and the mass ..mu.. approx. = 100 GeV at which SU(2) x U(1) is broken down to the U(1) of electromagnetism. There is at present no theoretical understanding of the extreme smallness of the ratio ..mu../M of these two numbers. This is the gauge hierarchy problem. This lecture attempts to review the various mechanisms for spontaneous supersymmetry breaking in gauge theories. Most of the discussions are concerned with the tree approximation, but what is presently known about radiative correction is also reviewed.

  4. Spontaneous intracranial hypotension

    International Nuclear Information System (INIS)

    Haritanti, A.; Karacostas, D.; Drevelengas, A.; Kanellopoulos, V.; Paraskevopoulou, E.; Lefkopoulos, A.; Economou, I.; Dimitriadis, A.S.

    2009-01-01

    Spontaneous intracranial hypotension (SIH) is an uncommon but increasingly recognized syndrome. Orthostatic headache with typical findings on magnetic resonance imaging (MRI) are the key to diagnosis. Delayed diagnosis of this condition may subject patients to unnecessary procedures and prolong morbidity. We describe six patients with SIH and outline the important clinical and neuroimaging findings. They were all relatively young, 20-54 years old, with clearly orthostatic headache, minimal neurological signs (only abducent nerve paresis in two) and diffuse pachymeningeal gadolinium enhancement on brain MRI, while two of them presented subdural hygromas. Spinal MRI was helpful in detecting a cervical cerebrospinal fluid leak in three patients and dilatation of the vertebral venous plexus with extradural fluid collection in another. Conservative management resulted in rapid resolution of symptoms in five patients (10 days-3 weeks) and in one who developed cerebral venous sinus thrombosis, the condition resolved in 2 months. However, this rapid clinical improvement was not accompanied by an analogous regression of the brain MR findings that persisted on a longer follow-up. Along with recent literature data, our patients further point out that SIH, to be correctly diagnosed, necessitates increased alertness by the attending physician, in the evaluation of headaches

  5. Spontaneous lateral temporal encephalocele.

    Science.gov (United States)

    Tuncbilek, Gokhan; Calis, Mert; Akalan, Nejat

    2013-01-01

    A spontaneous encephalocele is one that develops either because of embryological maldevelopment or from a poorly understood postnatal process that permits brain herniation to occur. We here report a rare case of lateral temporal encephalocele extending to the infratemporal fossa under the zygomatic arch. At birth, the infant was noted to have a large cystic mass in the right side of the face. After being operated on initially in another center in the newborn period, the patient was referred to our clinic with a diagnosis of temporal encephalocele. He was 6 months old at the time of admission. Computerized tomography scan and magnetic resonance imaging studies revealed a 8 × 9 cm fluid-filled, multiloculated cystic mass at the right infratemporal fossa. No intracranial pathology or connection is seen. The patient was operated on to reduce the distortion effect of the growing mass. The histopathological examination of the sac revealed well-differentiated mature glial tissue stained with glial fibrillary acid protein. This rare clinical presentation of encephaloceles should be taken into consideration during the evaluation of the lateral facial masses in the infancy period, and possible intracranial connection should be ruled out before surgery to avoid complications.

  6. Two-stage Lagrangian modeling of ignition processes in ignition quality tester and constant volume combustion chambers

    KAUST Repository

    Alfazazi, Adamu

    2016-08-10

    The ignition characteristics of isooctane and n-heptane in an ignition quality tester (IQT) were simulated using a two-stage Lagrangian (TSL) model, which is a zero-dimensional (0-D) reactor network method. The TSL model was also used to simulate the ignition delay of n-dodecane and n-heptane in a constant volume combustion chamber (CVCC), which is archived in the engine combustion network (ECN) library (http://www.ca.sandia.gov/ecn). A detailed chemical kinetic model for gasoline surrogates from the Lawrence Livermore National Laboratory (LLNL) was utilized for the simulation of n-heptane and isooctane. Additional simulations were performed using an optimized gasoline surrogate mechanism from RWTH Aachen University. Validations of the simulated data were also performed with experimental results from an IQT at KAUST. For simulation of n-dodecane in the CVCC, two n-dodecane kinetic models from the literature were utilized. The primary aim of this study is to test the ability of TSL to replicate ignition timings in the IQT and the CVCC. The agreement between the model and the experiment is acceptable except for isooctane in the IQT and n-heptane and n-dodecane in the CVCC. The ability of the simulations to replicate observable trends in ignition delay times with regard to changes in ambient temperature and pressure allows the model to provide insights into the reactions contributing towards ignition. Thus, the TSL model was further employed to investigate the physical and chemical processes responsible for controlling the overall ignition under various conditions. The effects of exothermicity, ambient pressure, and ambient oxygen concentration on first stage ignition were also studied. Increasing ambient pressure and oxygen concentration was found to shorten the overall ignition delay time, but does not affect the timing of the first stage ignition. Additionally, the temperature at the end of the first stage ignition was found to increase at higher ambient pressure

  7. Influence of muscle groups' activation on proximal femoral growth tendency.

    Science.gov (United States)

    Yadav, Priti; Shefelbine, Sandra J; Pontén, Eva; Gutierrez-Farewik, Elena M

    2017-12-01

    Muscle and joint contact force influence stresses at the proximal growth plate of the femur and thus bone growth, affecting the neck shaft angle (NSA) and femoral anteversion (FA). This study aims to illustrate how different muscle groups' activation during gait affects NSA and FA development in able-bodied children. Subject-specific femur models were developed for three able-bodied children (ages 6, 7, and 11 years) using magnetic resonance images. Contributions of different muscle groups-hip flexors, hip extensors, hip adductors, hip abductors, and knee extensors-to overall hip contact force were computed. Specific growth rate for the growth plate was computed, and the growth was simulated in the principal stress direction at each element in the growth front. The predicted growth indicated decreased NSA and FA (of about [Formula: see text] over a four-month period) for able-bodied children. Hip abductors contributed the most, and hip adductors, the least, to growth rate. All muscles groups contributed to a decrease in predicted NSA ([Formula: see text]0.01[Formula: see text]-0.04[Formula: see text] and FA ([Formula: see text]0.004[Formula: see text]-[Formula: see text]), except hip extensors and hip adductors, which showed a tendency to increase the FA ([Formula: see text]0.004[Formula: see text]-[Formula: see text]). Understanding influences of different muscle groups on long bone growth tendency can help in treatment planning for growing children with affected gait.

  8. Tendencies to the Improvement of the Cupola Process

    Directory of Open Access Journals (Sweden)

    A. Jopkiewicz

    2007-07-01

    Full Text Available Despite the fact of the big development of the technology of melting cast iron in electrical furnaces an essential part of it is still obtained in cupolas. In the paper actual tendencies of the improvement of the cupola process with special consideration of the structure principles of cupolas and their automatic control are presented. The rules of coke cupola processes for cold atmospheric and with oxygen enriched blast, with divided blast as well as for hot wind are presented. The technology of running long-campaign cupolas and the advantages of cokeless cupolas were presented as well. Among new solutions the FAR-system, the cupola with a partial recycling of gases and with using the plasma burners were described. There also were indicated possibilities of using pulsating gas flows as well as ecological problems and principles of complex controlling the cupola processes. The in this paper presented tendencies to improve the cupola process shall aid the foundrymen to make right choice by investment or modernization activities. The diversity of technical, economic and environmental conditions as well as of conditions related to the supply does not allow indicating one best solution.

  9. First-principles prediction of disordering tendencies in complex oxides

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Chao [Los Alamos National Laboratory; Stanek, Christopher R [Los Alamos National Laboratory; Sickafus, Kurt E [Los Alamos National Laboratory; Uberuaga, Blas P [Los Alamos National Laboratory

    2008-01-01

    The disordering tendencies of a series of zirconate (A{sub 2}Zr{sub 2}O{sub 7}) , hafnate (A{sub 2}Hf{sub 2}O{sub 7}), titanate (A{sub 2}Ti{sub 2}O{sub 7}), and stannate (A{sub 2} Sn{sub 2}O{sub 7}) pyrochlores are predicted in this study using first-principles total energy calculations. To model the disordered (A{sub 1/2}B{sub 1/2})(O{sub 7/8}/V{sub 1/8}){sub 2} fluorite structure, we have developed an 88-atom two-sublattice special quasirandom structure (SQS) that closely reproduces the most important near-neighbor intra-sublattice and inter-sublattice pair correlation functions of the random alloy. From the calculated disordering energies, the order-disorder transition temperatures of those pyrochlores are further predicted and our results agree well with the existing experimental phase diagrams. It is clearly demonstrated that both size and electronic effects play an important role in determining the disordering tendencies of pyrochlore compounds.

  10. The Investigation of Psychological Tendencies of Graduate Students

    Directory of Open Access Journals (Sweden)

    Erhan TUNÇ

    2015-12-01

    Full Text Available This study examines psychological tendencies in adults in terms of some variables. The study was conducted on 214 adults who are above 18 years old and continue their education at the programs of Continuous Education Centers of the universities located in Gaziantep Province. In the research a “Personal Information Form”, which covers demographic variables and “Eysenck Personality Inventory” which was developed by H.J.Eysenck and S.B.G. Eysenck to investigate psychological tendencies in 1964 where used as data collection tools. It was found that mean scores of the neuroticism sub-scale of Eysenck Personality Inventory differed significantly in terms of gender, age, profession, in come level, membership of a community, and being active in arts and sports. A statistically significant difference was detected between mean scores of the psychoticism sub-scale of the inventory in terms of age variable. Finally mean scores of the extraversion sub scale differed significantly in terms of marital status, residence, membership of a community, and being active in arts and sports

  11. Using Experimental Methods to Investigate Discriminatory Tendencies: A Lesson Report

    Directory of Open Access Journals (Sweden)

    Yu-Wen Chen

    2013-08-01

    Full Text Available Using dictator games in experimental analysis, this lesson report demonstrates the process and results of a postgraduate class project in which university students were instructed to scientifically investigate and explore one of German society’s most hotly-contested issues: the level of discriminatory tendencies of non-Muslims towards Muslims. The results of this class project show little or no discriminatory tendencies toward Muslims. Instead, the university students under our investigation tended to act favorably, or at the very least, fairly toward Muslims. We expect that this lesson report can demonstrate how a postgraduate course can be conducted in an innovative way, empowering students to collect primary data and finishing a small scientific project during the span of a semester. Dieser Bericht stellt die Prozesse und Ergebnisse einer experimentellen Studie eines Postgraduierten-Kurses der Universität Greifswald dar. Wir zeigen, wie Studierende das Thema Migration innovativ untersuchen können, indem sie neben theoretischen Lerninhalten an experimentelle Methoden sowie die Primärforschung herangeführt werden. Anhand eines Diktatorspiels wurden die teilnehmenden Studenten angeleitet, ein in der Öffentlichkeit kontrovers debattiertes Thema wissenschaftlich zu untersuchen: Diskriminierende Tendenzen von Nicht-Muslimen gegenüber Muslimen. Die Ergebnisse dieser Studie lassen jedoch nicht auf diskriminierende Tendenzen der Studenten schließen. Stattdessen deuten sie darauf hin, dass sich die Studierenden zumindest fair gegenüber Muslimen verhalten.

  12. Capital Taxation Tendencies in Ukraine and in the World

    Directory of Open Access Journals (Sweden)

    Danilov Оleksandr D.

    2014-03-01

    Full Text Available The goal of the article is analysis of the world and domestic tendencies of capital taxation and justification of directions of improvement of capital taxation in Ukraine. The study was carried out with division of taxation of human and material capital. Taxation of human capital in Ukraine is moderate, compared to OECD countries, however, its main load lies on employers, unlike in OECD countries, where it is distributed proportionally between employers and employees. Taking into account a high level of shadow income of the citizens, it is too early to perform this re-distribution in Ukraine, that is why it is expedient to reduce rates of the single social contribution by employers, at the same time increasing the level of natural resources taxation, which, in Ukraine, is one of the lowest in the world. Ukraine, compared to OECD countries, is characterised with a higher level of profit taxation, which has a negative impact on increasing own capital and restoration of fixed assets. Taking into account tendencies to reduction of both standard and implicit rates of profit tax abroad, we offer to develop a mechanism of reduction of the implicit profit tax rate through improvement of the mechanism of charging depreciation and strengthening regulating effects of the profit tax on profit in the context of restoration of the fixed assets. The prospect of further studies is justification of proposals regarding changing the mechanisms of charging depreciation and profit taxation preferences.

  13. Highly Accurate Ignition Delay Apparatus for Hypergolic Fuel Research

    National Research Council Canada - National Science Library

    Alfano, Angelo J; Mills, Jeffrey D; Vaghjiani, Ghanshyam L

    2006-01-01

    ... and a minimum of custom circuitry is still needed. This paper details line-of-sight electro-optical circuitry with direct digital readout and additional oscilloscope recording that can be used to measure total ignition and chemical delay times...

  14. ELIMINATION OF ROCKET IGNITION SIDE LOADS, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposal is responsive to Topic H10: Ground Processing and in particular to Subtopic H10.02. When a rocket motor/engine is ignited at low altitude its...

  15. Propellant Flow Actuated Piezoelectric Rocket Engine Igniter, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Spark ignition of a bi-propellant rocket engine is a classic, proven, and generally reliable process. However, timing can be critical, and the control logic,...

  16. Propellant Flow Actuated Piezoelectric Rocket Engine Igniter, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Under a Phase 1 effort, IES successfully developed and demonstrated a spark ignition concept where propellant flow drives a very simple fluid mechanical oscillator...

  17. Physical Improvements in Exciter/Igniter Units Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed project consists of developing a prototype exciter/igniter unit that can operate to a subset of expected flight performance requirements. The main focus...

  18. Physical Improvements in Exciter/Igniter Units, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed Phase 2 project consists of the physical integration of our Phase 1 small, compact exciter with a "flight like" igniter or spark plug capable of...

  19. Resolving a central ICF issue for ignition: Implosion symmertry

    International Nuclear Information System (INIS)

    Cray, M.; Delamater, N.D.; Fernandez, J.C.

    1994-01-01

    The Los Alamos National Laboratory Inertial Confinement Fusion (ICF) Program focuses on resolving key target-physics issues and developing technology needed for the National Ignition Facility (NIF). This work is being performed in collaboration with Lawrence Livermore National Laboratory (LLNL). A major requirement for the indirect-drive NIF ignition target is to achieve the irradiation uniformity on the capsule surface needed for a symmetrical high-convergence implosion. Los Alamos employed an integrated modeling technique using the Lasnex radiation-hydrodynamics code to design two different targets that achieve ignition and moderate gain. Los Alamos is performing experiments on the Nova Laser at LLNL in order to validate our NIF ignition calculations

  20. Progress in catalytic ignition fabrication and modeling : fabrication part 2.

    Science.gov (United States)

    2012-06-01

    The ignition temperature and heat generation from oxidation of methane on a platinum catalyst were : determined experimentally. A 127 micron diameter platinum coiled wire was placed crosswise in a : quartz tube of a plug flow reactor. A source meter ...

  1. Study on coal char ignition by radiant heat flux.

    Science.gov (United States)

    Korotkikh, A. G.; Slyusarskiy, K. V.

    2017-11-01

    The study on coal char ignition by CO2-continuous laser was carried out. The coal char samples of T-grade bituminous coal and 2B-grade lignite were studied via CO2-laser ignition setup. Ignition delay times were determined at ambient condition in heat flux density range 90–200 W/cm2. The average ignition delay time value for lignite samples were 2 times lower while this difference is larger in high heat flux region and lower in low heat flux region. The kinetic constants for overall oxidation reaction were determined using analytic solution of simplified one-dimensional heat transfer equation with radiant heat transfer boundary condition. The activation energy for lignite char was found to be less than it is for bituminous coal char by approximately 20 %.

  2. Nitrous Ethane-Ethylene Rocket with Hypergolic Ignition, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nitrous Ethane-Ethylene Rocket with Hypergolic Ignition (NEERHI) engine is a proposed technology designed to provide small spacecraft with non-toxic,...

  3. Nitrous Ethane-Ethylene Rocket with Hypergolic Ignition, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nitrous Ethane-Ethylene Rocket with Hypergolic Ignition (NEERHI) engine is a proposed technology designed to provide small spacecraft with non-toxic,...

  4. Bilateral spontaneous carotid artery dissection.

    Science.gov (United States)

    Townend, Bradley Scott; Traves, Laura; Crimmins, Denis

    2005-06-01

    Bilateral internal carotid artery dissections have been reported, but spontaneous bilateral dissections are rare. Internal carotid artery dissection can present with a spectrum of symptoms ranging from headache to completed stroke. Two cases of spontaneous bilateral carotid artery dissection are presented, one with headache and minimal symptoms and the other with a stroke syndrome. No cause could be found in either case, making the dissections completely spontaneous. Bilateral internal carotid artery dissection (ICAD) should be considered in young patients with unexplained head and neck pain with or without focal neurological symptoms and signs. The increasing availability of imaging would sustain the higher index of suspicion.

  5. Fast Ignition and Sustained Combustion of Ionic Liquids

    Science.gov (United States)

    Joshi, Prakash B. (Inventor); Piper, Lawrence G. (Inventor); Oakes, David B. (Inventor); Sabourin, Justin L. (Inventor); Hicks, Adam J. (Inventor); Green, B. David (Inventor); Tsinberg, Anait (Inventor); Dokhan, Allan (Inventor)

    2016-01-01

    A catalyst free method of igniting an ionic liquid is provided. The method can include mixing a liquid hypergol with a HAN (Hydroxylammonium nitrate)-based ionic liquid to ignite the HAN-based ionic liquid in the absence of a catalyst. The HAN-based ionic liquid and the liquid hypergol can be injected into a combustion chamber. The HAN-based ionic liquid and the liquid hypergol can impinge upon a stagnation plate positioned at top portion of the combustion chamber.

  6. Fusion ignition and burning of D-3He system

    International Nuclear Information System (INIS)

    Zeng Xiancai; Zhang Lifa; Gao Yaoming; Li Yunsheng

    1997-01-01

    The processes of ignition and burning in the fusion system of D- 3 He with a small number of neutrons have been analyzed and the corresponding conditions of ignition and burning have been given. Several typical physics models of D- 3 He reaction have also been simulated numerically. The results further demonstrate that the fusion system of D- 3 He is the optimum candidate of the fusion power with a small number of neutrons in future

  7. Compression Ratio and Catalyst Aging Effects on Aqueous Ethanol Ignition (Year 2): Part 1. Compression Ratio Effects on Aqueous Ethanol Ignition

    Science.gov (United States)

    2009-09-01

    The lean burning of water ethanol blends has the potential to reduce NOx, CO, and HC emissions while reducing the ethanol fermentation production cost of distillation and dehydration. The torch style ignition produced by the catalytic igniter allows ...

  8. CORONA DISCHARGE IGNITION FOR ADVANCED STATIONARY NATURAL GAS ENGINES

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Paul D. Ronney

    2003-09-12

    An ignition source was constructed that is capable of producing a pulsed corona discharge for the purpose of igniting mixtures in a test chamber. This corona generator is adaptable for use as the ignition source for one cylinder on a test engine. The first tests were performed in a cylindrical shaped chamber to study the characteristics of the corona and analyze various electrode geometries. Next a test chamber was constructed that closely represented the dimensions of the combustion chamber of the test engine at USC. Combustion tests were performed in this chamber and various electrode diameters and geometries were tested. The data acquisition and control system hardware for the USC engine lab was updated with new equipment. New software was also developed to perform the engine control and data acquisition functions. Work is underway to design a corona electrode that will fit in the new test engine and be capable igniting the mixture in one cylinder at first and eventually in all four cylinders. A test engine was purchased for the project that has two spark plug ports per cylinder. With this configuration it will be possible to switch between corona ignition and conventional spark plug ignition without making any mechanical modifications.

  9. Ignition time of hydrogen-air diffusion flames

    Science.gov (United States)

    Sánchez, Antonio L.; Fernández-Tarrazo, Eduardo; Boivin, Pierre; Liñán, Amable; Williams, Forman A.

    2012-11-01

    The ignition time of hydrogen-air diffusion flames is a quantity of utmost interest in a large number of applications, with implications regarding the viability of supersonic combustion and the safe operation of gas turbines. The underlying chemistry and the associated ignition history are very different depending on the initial temperature and pressure. This article addresses conditions that place the system above the so-called second explosion limit, as is typically the case in SCRAMJET operation, so that a branched-chain explosion characterizes the ignition process. The roles of local radical accumulation, molecular transport, and chemical reaction in nonpremixed ignition are clarified by considering the temporal evolution of an unstrained mixing layer formed between two semi-infinite spaces of hydrogen and air. The problem is formulated in terms of a radical-pool mass fraction, whose evolution in time is studied with a WKB expansion that exploits the disparity of chemical time scales present in the problem, leading to an explicit expression for the ignition time. The applicability of the analytical results for obtaining predictions of ignition distances in supersonic-combustion applications is also considered.

  10. Cyclopentane combustion. Part II. Ignition delay measurements and mechanism validation

    KAUST Repository

    Rachidi, Mariam El

    2017-06-12

    This study reports cyclopentane ignition delay measurements over a wide range of conditions. The measurements were obtained using two shock tubes and a rapid compression machine, and were used to test a detailed low- and high-temperature mechanism of cyclopentane oxidation that was presented in part I of this study (Al Rashidi et al., 2017). The ignition delay times of cyclopentane/air mixtures were measured over the temperature range of 650–1350K at pressures of 20 and 40atm and equivalence ratios of 0.5, 1.0 and 2.0. The ignition delay times simulated using the detailed chemical kinetic model of cyclopentane oxidation show very good agreement with the experimental measurements, as well as with the cyclopentane ignition and flame speed data available in the literature. The agreement is significantly improved compared to previous models developed and investigated at higher temperatures. Reaction path and sensitivity analyses were performed to provide insights into the ignition-controlling chemistry at low, intermediate and high temperatures. The results obtained in this study confirm that cycloalkanes are less reactive than their non-cyclic counterparts. Moreover, cyclopentane, a high octane number and high octane sensitivity fuel, exhibits minimal low-temperature chemistry and is considerably less reactive than cyclohexane. This study presents the first experimental low-temperature ignition delay data of cyclopentane, a potential fuel-blending component of particular interest due to its desirable antiknock characteristics.

  11. Spontaneous intraorbital hematoma: case report

    Directory of Open Access Journals (Sweden)

    Vinodan Paramanathan

    2010-12-01

    Full Text Available Vinodan Paramanathan, Ardalan ZolnourianQueen's Hospital NHS Foundation Trust, Burton on Trent, Staffordshire DE13 0RB, UKAbstract: Spontaneous intraorbital hematoma is an uncommon clinical entity seen in ophthalmology practice. It is poorly represented in the literature. Current evidence attributes it to orbital trauma, neoplasm, vascular malformations, acute sinusitis, and systemic abnormalities. A 65-year-old female presented with spontaneous intraorbital hematoma manifesting as severe ocular pains, eyelid edema, proptosis, and diplopia, without a history of trauma. Computer tomography demonstrated a fairly well defined extraconal lesion with opacification of the paranasal sinuses. The principal differential based on all findings was that of a spreading sinus infection and an extraconal tumor. An unprecedented finding of a spontaneous orbital hematoma was discovered when the patient was taken to theater. We discuss the rarity of this condition and its management.Keywords: hemorrhage, ophthalmology, spontaneous, intra-orbital, hematoma

  12. Sensitivity and Effect of Ignition Timing on the Performance of a Spark Ignition Engine: An Experimental and Modeling Study

    Directory of Open Access Journals (Sweden)

    A. H. Kakaee

    2011-01-01

    Full Text Available The performance of a spark ignition engine is investigated under different values of ignition advance. A two-zone burnt/unburned model with the fuel burning rate described by a Wiebe function is used for modeling in-cylinder combustion, and then experiments are carried out to validate the calculated data. By varying the ignition timing, the results of some characteristics such as power, torque, thermal efficiency, pressure, and heat release are obtained and compared. The results show that optimal power and torque are achieved at 31°CA before top dead center, and performance is decreased if this ignition timing is changed. It is also shown that the maximum thermal efficiency is accomplished when peak pressure occurs between 5 and 15°CA after top dead center.

  13. Status of the National Ignition Facility Integrated Computer Control System (ICCS) on the Path to Ignition

    International Nuclear Information System (INIS)

    Lagin, L J; Bettenhauasen, R C; Bowers, G A; Carey, R W; Edwards, O D; Estes, C M; Demaret, R D; Ferguson, S W; Fisher, J M; Ho, J C; Ludwigsen, A P; Mathisen, D G; Marshall, C D; Matone, J M; McGuigan, D L; Sanchez, R J; Shelton, R T; Stout, E A; Tekle, E; Townsend, S L; Van Arsdall, P J; Wilson, E F

    2007-01-01

    The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility under construction that will contain a 192-beam, 1.8-Megajoule, 500-Terawatt, ultraviolet laser system together with a 10-meter diameter target chamber with room for multiple experimental diagnostics. NIF is the world's largest and most energetic laser experimental system, providing a scientific center to study inertial confinement fusion (ICF) and matter at extreme energy densities and pressures. NIF's laser beams are designed to compress fusion targets to conditions required for thermonuclear burn, liberating more energy than required to initiate the fusion reactions. NIF is comprised of 24 independent bundles of 8 beams each using laser hardware that is modularized into more than 6,000 line replaceable units such as optical assemblies, laser amplifiers, and multifunction sensor packages containing 60,000 control and diagnostic points. NIF is operated by the large-scale Integrated Computer Control System (ICCS) in an architecture partitioned by bundle and distributed among over 800 front-end processors and 50 supervisory servers. NIF's automated control subsystems are built from a common object-oriented software framework based on CORBA distribution that deploys the software across the computer network and achieves interoperation between different languages and target architectures. A shot automation framework has been deployed during the past year to orchestrate and automate shots performed at the NIF using the ICCS. In December 2006, a full cluster of 48 beams of NIF was fired simultaneously, demonstrating that the independent bundle control system will scale to full scale of 192 beams. At present, 72 beams have been commissioned and have demonstrated 1.4-Megajoule capability of infrared light. During the next two years, the control system will be expanded to include automation of target area systems including final optics, target positioners and

  14. Status of the National Ignition Facility Integrated Computer Control System (ICCS) on the path to ignition

    Energy Technology Data Exchange (ETDEWEB)

    Lagin, L.J. [Lawrence Livermore National Laboratory, P.O. Box 808, Livermore, CA 94550 (United States)], E-mail: lagin1@llnl.gov; Bettenhausen, R.C.; Bowers, G.A.; Carey, R.W.; Edwards, O.D.; Estes, C.M.; Demaret, R.D.; Ferguson, S.W.; Fisher, J.M.; Ho, J.C.; Ludwigsen, A.P.; Mathisen, D.G.; Marshall, C.D.; Matone, J.T.; McGuigan, D.L.; Sanchez, R.J.; Stout, E.A.; Tekle, E.A.; Townsend, S.L.; Van Arsdall, P.J. [Lawrence Livermore National Laboratory, P.O. Box 808, Livermore, CA 94550 (United States)] (and others)

    2008-04-15

    The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility under construction that will contain a 192-beam, 1.8-MJ, 500-TW, ultraviolet laser system together with a 10-m diameter target chamber with room for multiple experimental diagnostics. NIF is the world's largest and most energetic laser experimental system, providing a scientific center to study inertial confinement fusion (ICF) and matter at extreme energy densities and pressures. NIF's laser beams are designed to compress fusion targets to conditions required for thermonuclear burn, liberating more energy than required to initiate the fusion reactions. NIF is comprised of 24 independent bundles of eight beams each using laser hardware that is modularized into more than 6000 line replaceable units such as optical assemblies, laser amplifiers, and multi-function sensor packages containing 60,000 control and diagnostic points. NIF is operated by the large-scale Integrated Computer Control System (ICCS) in an architecture partitioned by bundle and distributed among over 800 front-end processors and 50 supervisory servers. NIF's automated control subsystems are built from a common object-oriented software framework based on CORBA distribution that deploys the software across the computer network and achieves interoperation between different languages and target architectures. A shot automation framework has been deployed during the past year to orchestrate and automate shots performed at the NIF using the ICCS. In December 2006, a full cluster of 48 beams of NIF was fired simultaneously, demonstrating that the independent bundle control system will scale to full scale of 192 beams. At present, 72 beams have been commissioned and have demonstrated 1.4-MJ capability of infrared light. During the next 2 years, the control system will be expanded in preparation for project completion in 2009 to include automation of target area systems including

  15. Status of the National Ignition Facility Integrated Computer Control System (ICCS) on the Path to Ignition

    Energy Technology Data Exchange (ETDEWEB)

    Lagin, L J; Bettenhauasen, R C; Bowers, G A; Carey, R W; Edwards, O D; Estes, C M; Demaret, R D; Ferguson, S W; . Fisher, J M; Ho, J C; Ludwigsen, A P; Mathisen, D G; Marshall, C D; Matone, J M; McGuigan, D L; Sanchez, R J; Shelton, R T; Stout, E A; Tekle, E; Townsend, S L; Van Arsdall, P J; Wilson, E F

    2007-09-11

    The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility under construction that will contain a 192-beam, 1.8-Megajoule, 500-Terawatt, ultraviolet laser system together with a 10-meter diameter target chamber with room for multiple experimental diagnostics. NIF is the world's largest and most energetic laser experimental system, providing a scientific center to study inertial confinement fusion (ICF) and matter at extreme energy densities and pressures. NIF's laser beams are designed to compress fusion targets to conditions required for thermonuclear burn, liberating more energy than required to initiate the fusion reactions. NIF is comprised of 24 independent bundles of 8 beams each using laser hardware that is modularized into more than 6,000 line replaceable units such as optical assemblies, laser amplifiers, and multifunction sensor packages containing 60,000 control and diagnostic points. NIF is operated by the large-scale Integrated Computer Control System (ICCS) in an architecture partitioned by bundle and distributed among over 800 front-end processors and 50 supervisory servers. NIF's automated control subsystems are built from a common object-oriented software framework based on CORBA distribution that deploys the software across the computer network and achieves interoperation between different languages and target architectures. A shot automation framework has been deployed during the past year to orchestrate and automate shots performed at the NIF using the ICCS. In December 2006, a full cluster of 48 beams of NIF was fired simultaneously, demonstrating that the independent bundle control system will scale to full scale of 192 beams. At present, 72 beams have been commissioned and have demonstrated 1.4-Megajoule capability of infrared light. During the next two years, the control system will be expanded to include automation of target area systems including final optics, target

  16. Fusion Ignition Research Experiment System Integration

    International Nuclear Information System (INIS)

    Brown, T.

    1999-01-01

    The FIRE (Fusion Ignition Research Experiment) configuration has been designed to meet the physics objectives and subsystem requirements in an arrangement that allows remote maintenance of in-vessel components and hands-on maintenance of components outside the TF (toroidal-field) boundary. The general arrangement consists of sixteen wedged-shaped TF coils that surround a free-standing central solenoid (CS), a double-wall vacuum vessel and internal plasma-facing components. A center tie rod is used to help support the vertical magnetic loads and a compression ring is used to maintain wedge pressure in the inboard corners of the TF coils. The magnets are liquid nitrogen cooled and the entire device is surrounded by a thermal enclosure. The double-wall vacuum vessel integrates cooling and shielding in a shape that maximizes shielding of ex-vessel components. The FIRE configuration development and integration process has evolved from an early stage of concept selection to a higher level of machine definition and component details. This paper describes the status of the configuration development and the integration of the major subsystem components

  17. Ignition target and laser-plasma instabilities

    International Nuclear Information System (INIS)

    Laffite, S.; Loiseau, P.

    2010-01-01

    For the first time indirect drive ignition targets have been designed with the constraint of limiting laser-plasma instabilities. The amplification of these instabilities is directly proportional to the luminous flux density, it means to the sizes of the focal spots too. This study shows that increasing the sizes of the focal spots does not reduce linear amplification gains in a proportional way because the global optimization of the target implies changes in hydrodynamical conditions that in turn have an impact on the value of the amplification gain. The design of the target is a 2-step approach: the first step aims at assuring a uniform irradiation and compression of the target. The first step requires information concerning the laser focusing spots, the dimensions of the hohlraum, the inert gas contained in it, the materials of the wall. The second step is an optimization approach whose aim is to reduce the risk of laser-plasmas instabilities. This optimization is made through simulations of the amplification gains of stimulated Raman and Brillouin backscattering. This method has allowed us to design an optimized target for a rugby-shaped hohlraum. (A.C.)

  18. Large optics for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Baisden, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-01-12

    The National Ignition Facility (NIF) laser with its 192 independent laser beams is not only the world’s largest laser, it is also the largest optical system ever built. With its 192 independent laser beams, the NIF requires a total of 7648 large-aperture (meter-sized) optics. One of the many challenges in designing and building NIF has been to carry out the research and development on optical materials, optics design, and optics manufacturing and metrology technologies needed to achieve NIF’s high output energies and precision beam quality. This paper describes the multiyear, multi-supplier, development effort that was undertaken to develop the advanced optical materials, coatings, fabrication technologies, and associated process improvements necessary to manufacture the wide range of NIF optics. The optics include neodymium-doped phosphate glass laser amplifiers; fused silica lenses, windows, and phase plates; mirrors and polarizers with multi-layer, high-reflectivity dielectric coatings deposited on BK7 substrates; and potassium di-hydrogen phosphate crystal optics for fast optical switches, frequency conversion, and polarization rotation. Also included is a discussion of optical specifications and custom metrology and quality-assurance tools designed, built, and fielded at supplier sites to verify compliance with the stringent NIF specifications. In addition, a brief description of the ongoing program to improve the operational lifetime (i.e., damage resistance) of optics exposed to high fluence in the 351-nm (3ω) is provided.

  19. Maintainability features of the compact ignition tokamak

    International Nuclear Information System (INIS)

    Spampinato, P.T.; Bushnell, C.W.

    1986-01-01

    The Compact Ignition Tokamak (CIT) is a deuterium-tritium (D-T) device envisaged to be the next experimental reactor in the US Fusion Program. The reactor will initially operate in a nonactivated hydrogen phase for approximately two years. This will permit verification of the integrity of the total system and allow hands-on repair to equipment which has experienced shakedown and early operation failures. Once D-T operations commence, reactor maintenance will require remote handling techniques. An evaluation has been completed to determine what maintenance operations must be performed on the CIT. A maintenance philosophy has been developed which is based upon the use of manipulator systems and robotics in the test cell. Replacement of life-limited equipment will be accomplished using a modular design approach for components, with simple remotely operable interfaces. Examples of operations to be done remotely include: (1) replacing of rf antennae and Faraday shields, (2) uncoupling diagnostic and fueling penetrations, (3) removing of all port covers, and (4) replacing first wall armor tiles, optical mirrors, and vacuum windows

  20. Silane as an ignition aid in scramjets

    Science.gov (United States)

    Morris, N. A.; Morgan, R. G.; Paull, A.; Stalker, R. J.

    1987-01-01

    This paper presents the results of experiments on silane/hydrogen combustion in a scramjet model configured as a constant area duct with a central injector. Intake flow conditions were created by free piston shock tunnels with simulated flight speeds ranging between 1.4 and 4.2 km/s. Intake conditions were restricted to three nominal Mach numbers. Boundary layer heating appeared to be responsible for ignition at low temperature, high Mach number conditions. Concentration of silane in hydrogen was varied, as well as intake temperature and pressure. Results indicated that silane in concentrations as low as 2.5 percent in hydrogen, was effective as a fuel additive for scramjets at conditions where hydrogen alone could not support combustion. An unsteady effect was observed as the intake temperature approached the lower limit for combustion. The combustion temperature limit rose significantly as the intake pressure was reduced to low levels. Computer simulations using a one dimensional premixed analysis suggested that although silane enhanced the combustion process, it was strongly dependent on the initial concentration of free radical oxygen. Results from the simulations were comparable to experimental results for some conditions.

  1. National Ignition Facility Project Site Safety Program

    International Nuclear Information System (INIS)

    Dun, C

    2003-01-01

    This Safety Program for the National Ignition Facility (NIF) presents safety protocols and requirements that management and workers shall follow to assure a safe and healthful work environment during activities performed on the NIF Project site. The NIF Project Site Safety Program (NPSSP) requires that activities at the NIF Project site be performed in accordance with the ''LLNL ES and H Manual'' and the augmented set of controls and processes described in this NIF Project Site Safety Program. Specifically, this document: (1) Defines the fundamental NIF site safety philosophy. (2) Defines the areas covered by this safety program (see Appendix B). (3) Identifies management roles and responsibilities. (4) Defines core safety management processes. (5) Identifies NIF site-specific safety requirements. This NPSSP sets forth the responsibilities, requirements, rules, policies, and regulations for workers involved in work activities performed on the NIF Project site. Workers are required to implement measures to create a universal awareness that promotes safe practice at the work site and will achieve NIF management objectives in preventing accidents and illnesses. ES and H requirements are consistent with the ''LLNL ES and H Manual''. This NPSSP and implementing procedures (e.g., Management Walkabout, special work procedures, etc.,) are a comprehensive safety program that applies to NIF workers on the NIF Project site. The NIF Project site includes the B581/B681 site and support areas shown in Appendix B

  2. Spontaneous ischaemic stroke in dogs

    DEFF Research Database (Denmark)

    Gredal, Hanne Birgit; Skerritt, G. C.; Gideon, P.

    2013-01-01

    Translation of experimental stroke research into the clinical setting is often unsuccessful. Novel approaches are therefore desirable. As humans, pet dogs suffer from spontaneous ischaemic stroke and may hence offer new ways of studying genuine stroke injury mechanisms.......Translation of experimental stroke research into the clinical setting is often unsuccessful. Novel approaches are therefore desirable. As humans, pet dogs suffer from spontaneous ischaemic stroke and may hence offer new ways of studying genuine stroke injury mechanisms....

  3. Spontaneity and international marketing performance

    OpenAIRE

    Souchon, Anne L.; Hughes, Paul; Farrell, Andrew M.; Nemkova, Ekaterina; Oliveira, Joao S.

    2016-01-01

    The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. Purpose – The purpose of this paper is to ascertain how today’s international marketers can perform better on the global scene by harnessing spontaneity. Design/methodology/approach – The authors draw on contingency theory to develop a model of the spontaneity – international marketing performance relationship, and identify three potential m...

  4. Study of ignition in a high compression ratio SI (spark ignition) methanol engine using LES (large eddy simulation) with detailed chemical kinetics

    International Nuclear Information System (INIS)

    Zhen, Xudong; Wang, Yang

    2013-01-01

    Methanol has been recently used as an alternative to conventional fuels for internal combustion engines in order to satisfy some environmental and economical concerns. In this paper, the ignition in a high compression ratio SI (spark ignition) methanol engine was studied by using LES (large eddy simulation) with detailed chemical kinetics. A 21-species, 84-reaction methanol mechanism was adopted to simulate the auto-ignition process of the methanol/air mixture. The MIT (minimum ignition temperature) and MIE (minimum ignition energy) are two important properties for designing safety standards and understanding the ignition process of combustible mixtures. The effects of the flame kernel size, flame kernel temperature and equivalence ratio were also examined on MIT, MIE and IDP (ignition delay period). The methanol mechanism was validated by experimental test. The simulated results showed that the flame kernel size, temperature and energy dramatically affected the values of the MIT, MIE and IDP for a methanol/air mixture, the value of the ignition delay period was not only related to the flame kernel energy, but also to the flame kernel temperature. - Highlights: • We used LES (large eddy simulation) coupled with detailed chemical kinetics to simulate methanol ignition. • The flame kernel size and temperature affected the minimum ignition temperature. • The flame kernel temperature and energy affected the ignition delay period. • The equivalence ratio of methanol–air mixture affected the ignition delay period

  5. TENDENCIES OF DEVELOPMENT OF IMMIGRATION SCHOOLING IN THE XX CENTURY

    Directory of Open Access Journals (Sweden)

    Віталій Мацько

    2015-12-01

    Full Text Available The article deals with objective and subjective tendencies of development of primary, secondary and higher education in the countries west, inhabited by immigrants from Ukraine. It is proved that during the XX century Ukrainian emigration schooling went that evolutional way, which other nations did in foreign environment. Unlike schools that existed in the USSR, the emigrants kept schools at their own expense and only in some cases the state assumed the obligation to teach Ukrainian children (Czechoslovakia, Canada. In the history of pedagogy the activity of school of Ukrainian studies outside the motherland – is a unique example of preservation of national identity, instilling in the younger generation the knowledge about Ukraine, its customs and traditions. The practice proves that children, who learned early the basics of the Ukrainian language and literature in foreign environment, fluently speak their native language during their lives.

  6. Modelling the basic error tendencies of human operators

    International Nuclear Information System (INIS)

    Reason, J.

    1988-01-01

    The paper outlines the primary structural features of human cognition: a limited, serial workspace interacting with a parallel distributed knowledge base. It is argued that the essential computational features of human cognition - to be captured by an adequate operator model - reside in the mechanisms by which stored knowledge structures are selected and brought into play. Two such computational 'primitives' are identified: similarity-matching and frequency-gambling. These two retrieval heuristics, it is argued, shape both the overall character of human performance (i.e. its heavy reliance on pattern-matching) and its basic error tendencies ('strong-but-wrong' responses, confirmation, similarity and frequency biases, and cognitive 'lock-up'). The various features of human cognition are integrated with a dynamic operator model capable of being represented in software form. This computer model, when run repeatedly with a variety of problem configurations, should produce a distribution of behaviours which, in total, simulate the general character of operator performance. (author)

  7. Modelling the basic error tendencies of human operators

    International Nuclear Information System (INIS)

    Reason, James

    1988-01-01

    The paper outlines the primary structural features of human cognition: a limited, serial workspace interacting with a parallel distributed knowledge base. It is argued that the essential computational features of human cognition - to be captured by an adequate operator model - reside in the mechanisms by which stored knowledge structures are selected and brought into play. Two such computational 'primitives' are identified: similarity-matching and frequency-gambling. These two retrieval heuristics, it is argued, shape both the overall character of human performance (i.e. its heavy reliance on pattern-matching) and its basic error tendencies ('strong-but-wrong' responses, confirmation, similarity and frequency biases, and cognitive 'lock-up'). The various features of human cognition are integrated with a dynamic operator model capable of being represented in software form. This computer model, when run repeatedly with a variety of problem configurations, should produce a distribution of behaviours which, in toto, simulate the general character of operator performance. (author)

  8. Down-regulating narcissistic tendencies: communal focus reduces state narcissism.

    Science.gov (United States)

    Giacomin, Miranda; Jordan, Christian H

    2014-04-01

    Narcissism has been conceptualized as a set of coherent, mutually reinforcing attributes that orients individuals toward self-enhancement and positive self-feelings. In this view, reducing one element of narcissism--such as a greater concern for agency than communion--may situationally reduce narcissism in a state-like manner. Across five studies, we found that increasing communal focus toward others decreases state narcissism. In Study 1, participants induced to feel empathy reported less state narcissism. In Studies 2 to 4, participants primed with interdependent self-construal reported less state narcissism than control participants and those primed with independent self-construal. Furthermore, in Study 4, changes in state narcissism mediated changes in desire for fame and perceptions that others deserve help. Thus, changes in one element of narcissism may situationally reduce narcissistic tendencies. These findings suggest that narcissism is more state-like and context-dependent than previously assumed.

  9. Problematized Humanism: Sadi’s Racist Tendency in Gulistan

    Directory of Open Access Journals (Sweden)

    Ahmad Gholi

    2015-05-01

    Full Text Available From ancient times to the present, blacks have been the victim of both overt and covert racism in different parts of the world and Iran is no exception. The most inhumane and outstanding facet of racism is slavery which, due to their belief in their cultural and racial supremacy, Iranians also practiced from the Achaemenid period until the second half of 19th century when it was abolished. One of the dark sides of racism infamous poets’ participation in it by legitimizing, normalizing, and promulgating the negative images of supposedly inferior race. Some poets are blatantly racist but in some racism appears just in the form of a furtive tendency, thus it needs to be uncovered with zeal of an archeologist, and Sadi belongs to the second category; therefore, this article seeks to lay bare his racist leaning by focusing on one of his tales in his Gulistan (Rose Garden, thereby challenging his humanism.

  10. Dynamical tendencies of health consequences caused by competitive risk factors

    International Nuclear Information System (INIS)

    Bykov, A.A.; Pronina, I.A.; Kudriavtsev, G.I.

    2000-01-01

    The paper deals with the generalized probabilistic approach for analyzing health consequences caused by various exposure factors. Formally basing on the competitive risk theory, it is introduced a general risk model for analysis the influence of environmental risk factors to human health. The usefulness of the model approach is in the opportunity of taking into account: time delay of impact and consequence manifestation; easy comparisons of exposure factors with different nature and various consequences (morbidity and mortality, carcinogenic and genetic); social and environmental components in overall mortality. Preliminary examples of comparative risk analysis are demonstrated on the Russian demography and environmental data with the attempt of characterizing the dynamical tendencies and evolution of introduced risk index. The prospects of the probabilistic approach and the results obtaining on this basis are discussed. (author)

  11. DOUBLE ORAL AUCTIONS AND TENDENCIES TOWARD MORAL HAZARD

    Directory of Open Access Journals (Sweden)

    Kubák Matúš

    2012-12-01

    Full Text Available Moral hazard can be found almost in all fields of human activities. Moral hazard is a change of economic agent´s behaviour when circumstances change. Theoretical background of moral hazard issue in economics dates back to 1970s. Recognition of moral hazard started by published studies of Pauly (Pauly 1968, Zeckhauser (Zeckhauser 1970, Arrow (Arrow 1971 and Mirrlees (Mirrlees 1999. Current situation of the global economy (fall 2011 was caused largely by moral hazard executed by authorities such as governments, institutions, ranking agencies, banks, chief executive officers, politicians etc. Efforts to stabilise Eurozone, governments bail-outs to banks, governments purchases of toxic assets, rescue packages given to the bank sector and big companies, which are “too big to fail”, rescue packages given to debtor nations, golden parachutes given to employees which are leaving companies are nothing but the manifestations of moral hazard in economic and politic reality. This paper uses an economic experiment with 96 subjects to examine the tendencies of economic agents towards moral hazard. Design of the experiment allowed simulating third party’s intervention on a market (e.g. state funding accelerating purchase, health care insurance function on the market with health care. Obtained data are statistically evaluated and it is shown, that economic agents incline to moral hazard in case, when it is possible. Study shows how rational agents became less rational in terms of average market price, after intervention of a third party on the market. Third party intervention raises the average market prices presenting a manifestation of moral hazard. It is shown, that under given assumptions, even rational economic agents diverge from rational and market efficient strategies and behave irresponsibly. Despite generally negative attitude towards moral hazard, it is shown that economic agents have tendencies to behave in such a manner

  12. Spontaneous trait inference is culture-specific: behavioral and neural evidence.

    Science.gov (United States)

    Na, Jinkyung; Kitayama, Shinobu

    2011-08-01

    People with an independent model of the self may be expected to develop a spontaneous tendency to infer a personality trait from another person's behavior, but those with an interdependent model of the self may not show such a tendency. We tested this prediction by assessing the cumulative effect of both trait activation and trait binding in a diagnostic task that required no trait inference. Participants first memorized pairings of facial photos with trait-implying behavior. In a subsequent lexical decision task, European Americans showed clear evidence of spontaneous trait inference: When they were primed with a previously studied face, lexical decision for the word for the implied trait associated with that face was facilitated, and the antonym of the implied trait elicited an electrophysiological sign associated with processing of semantically inconsistent information (i.e., the N400). As predicted, however, neither effect was observed for Asian Americans. The cultural difference was mediated by independent self-construal.

  13. Intermediate species measurement during iso-butanol auto-ignition

    KAUST Repository

    Ji, Weiqi

    2015-10-01

    © 2015 The Combustion Institute.Published by Elsevier Inc. All rights reserved. This work presents the time histories of intermediate species during the auto-ignition of iso-butanol at high pressure and intermediate temperature conditions obtained using a rapid compression machine and recently developed fast sampling system. Iso-butanol ignition delays were acquired for iso-butanol/O2 mixture with an inert/O2 ratio of 7.26, equivalence ratio of 0.4, in the temperature range of 840-950 K and at pressure of 25 bar. Fast sampling and gas chromatography were used to acquire and quantify the intermediate species during the ignition delay of the same mixture at P = 25.3 bar and T = 905 K. The ignition delay times and quantitative measurements of the mole fraction time histories of methane, ethene, propene, iso-butene, iso-butyraldehyde, iso-butanol, and carbon monoxide were compared with predictions from the detailed mechanisms developed by Sarathy et al., Merchant et al., and Cai et al. It is shown that while the Sarathy mechanism well predicts the overall ignition delay time, it overpredicts ethene by a factor of 6-10, underpredicts iso-butene by a factor of 2, and overpredicts iso-butyraldehyde by a factor of 2. Reaction path and sensitivity analyses were carried out to identify the reactions responsible for the observed inadequacy. The rates of iso-butanol hydrogen atom abstraction by OH radical and the beta-scission reactions of hydroxybutyl radicals were updated based on recently published quantum calculation results. Significant improvements were achieved in predicting ignition delay at high pressures (25 and 30 bar) and the species concentrations of ethene and iso-butene. However, the updated mechanism still overpredicts iso-butyraldehyde concentrations. Also, the updated mechanism degrades the prediction in ignition delay at lower pressure (15 bar) compared to the original mechanism developed by Sarathy et al.

  14. Compositional effects on the ignition of FACE gasolines

    KAUST Repository

    Sarathy, Mani

    2016-05-08

    As regulatory measures for improved fuel economy and decreased emissions are pushing gasoline engine combustion technologies towards extreme conditions (i.e., boosted and intercooled intake with exhaust gas recirculation), fuel ignition characteristics become increasingly important for enabling stable operation. This study explores the effects of chemical composition on the fundamental ignition behavior of gasoline fuels. Two well-characterized, high-octane, non-oxygenated FACE (Fuels for Advanced Combustion Engines) gasolines, FACE F and FACE G, having similar antiknock indices but different octane sensitivities and chemical compositions are studied. Ignition experiments were conducted in shock tubes and a rapid compression machine (RCM) at nominal pressures of 20 and 40. atm, equivalence ratios of 0.5 and 1.0, and temperatures ranging from 650 to 1270. K. Results at temperatures above 900. K indicate that ignition delay time is similar for these fuels. However, RCM measurements below 900. K demonstrate a stronger negative temperature coefficient behavior for FACE F gasoline having lower octane sensitivity. In addition, RCM pressure profiles under two-stage ignition conditions illustrate that the magnitude of low-temperature heat release (LTHR) increases with decreasing fuel octane sensitivity. However, intermediate-temperature heat release is shown to increase as fuel octane sensitivity increases. Various surrogate fuel mixtures were formulated to conduct chemical kinetic modeling, and complex multicomponent surrogate mixtures were shown to reproduce experimentally observed trends better than simpler two- and three-component mixtures composed of n-heptane, iso-octane, and toluene. Measurements in a Cooperative Fuels Research (CFR) engine demonstrated that the multicomponent surrogates accurately captured the antiknock quality of the FACE gasolines. Simulations were performed using multicomponent surrogates for FACE F and G to reveal the underlying chemical

  15. Ignition during hydrogen release from high pressure into the atmosphere

    Science.gov (United States)

    Oleszczak, P.; Wolanski, P.

    2010-12-01

    The first investigations concerned with a problem of hydrogen jet ignition, during outflow from a high-pressure vessel were carried out nearly 40 years ago by Wolanski and Wojcicki. The research resulted from a dramatic accident in the Chorzow Chemical Plant Azoty, where the explosion of a synthesis gas made up of a mixture composed of three moles of hydrogen per mole of nitrogen, at 300°C and 30 MPa killed four people. Initial investigation had excluded potential external ignition sources and the main aim of the research was to determine the cause of ignition. Hydrogen is currently considered as a potential fuel for various vehicles such as cars, trucks, buses, etc. Crucial safety issues are of potential concern, associated with the storage of hydrogen at a very high pressure. Indeed, the evidence obtained nearly 40 years ago shows that sudden rupture of a high-pressure hydrogen storage tank or other component can result in ignition and potentially explosion. The aim of the present research is identification of the conditions under which hydrogen ignition occurs as a result of compression and heating of the air by the shock wave generated by discharge of high-pressure hydrogen. Experiments have been conducted using a facility constructed in the Combustion Laboratory of the Institute of Heat Engineering, Warsaw University of Technology. Tests under various configurations have been performed to determine critical conditions for occurrence of high-pressure hydrogen ignition. The results show that a critical pressure exists, leading to ignition, which depends mainly on the geometric configuration of the outflow system, such as tube diameter, and on the presence of obstacles.

  16. Ignition studies of two low-octane gasolines

    KAUST Repository

    Javed, Tamour

    2017-07-24

    Low-octane gasolines (RON ∼ 50–70 range) are prospective fuels for gasoline compression ignition (GCI) internal combustion engines. GCI technology utilizing low-octane fuels has the potential to significantly improve well-to-wheel efficiency and reduce the transportation sector\\'s environmental footprint by offsetting diesel fuel usage in compression ignition engines. In this study, ignition delay times of two low-octane FACE (Fuels for Advanced Combustion Engines) gasolines, FACE I and FACE J, were measured in a shock tube and a rapid compression machine over a broad range of engine-relevant conditions (650–1200 K, 20 and 40 bar and ϕ = 0.5 and 1). The two gasolines are of similar octane ratings with anti-knock index, AKI = (RON + MON)/2, of ∼ 70 and sensitivity, S = RON–MON, of ∼ 3. However, the molecular compositions of the two gasolines are notably different. Experimental ignition delay time results showed that the two gasolines exhibited similar reactivity over a wide range of test conditions. Furthermore, ignition delay times of a primary reference fuel (PRF) surrogate (n-heptane/iso-octane blend), having the same AKI as the FACE gasolines, captured the ignition behavior of these gasolines with some minor discrepancies at low temperatures (T < 700 K). Multi-component surrogates, formulated by matching the octane ratings and compositions of the two gasolines, emulated the autoignition behavior of gasolines from high to low temperatures. Homogeneous charge compression ignition (HCCI) engine simulations were used to show that the PRF and multi-component surrogates exhibited similar combustion phasing over a wide range of engine operating conditions.

  17. Effect of laser induced plasma ignition timing and location on Diesel spray combustion

    International Nuclear Information System (INIS)

    Pastor, José V.; García-Oliver, José M.; García, Antonio; Pinotti, Mattia

    2017-01-01

    Highlights: • Laser plasma ignition is applied to a direct injection Diesel spray, compared with auto-ignition. • Critical local fuel/air ratio for LIP provoked ignition is obtained. • The LIP system is able to stabilize Diesel combustion compared to auto-ignition cases. • Varying LIP position along spray axis directly affects Ignition-delay. • Premixed combustion is reduced both by varying position and delay of the LIP ignition system. - Abstract: An experimental study about the influence of the local conditions at the ignition location on combustion development of a direct injection spray is carried out in an optical engine. A laser induced plasma ignition system has been used to force the spray ignition, allowing comparison of combustion’s evolution and stability with the case of conventional autoignition on the Diesel fuel in terms of ignition delay, rate of heat release, spray penetration and soot location evolution. The local equivalence ratio variation along the spray axis during the injection process was determined with a 1D spray model, previously calibrated and validated. Upper equivalence ratios limits for the ignition event of a direct injected Diesel spray, both in terms of ignition success possibilities and stability of the phenomena, could been determined thanks to application of the laser plasma ignition system. In all laser plasma induced ignition cases, heat release was found to be higher than for the autoignition reference cases, and it was found to be linked to a decrease of ignition delay, with the premixed peak in the rate of heat release curve progressively disappearing as the ignition delay time gets shorter. Ignition delay has been analyzed as a function of the laser position, too. It was found that ignition delay increases for plasma positions closer to the nozzle, indicating that the amount of energy introduced by the laser induced plasma is not the only parameter affecting combustion initiation, but local equivalence ratio

  18. Reactive burn models and ignition & growth concept

    Science.gov (United States)

    Menikoff, R.; Shaw, M. S.

    Plastic-bonded explosives are heterogeneous materials. Experimentally, shock initiation is sensitive to small amounts of porosity, due to the formation of hot spots (small localized regions of high temperature). This leads to the Ignition & Growth concept, introduced by LeeTarver in 1980, as the basis for reactive burn models. A homo- genized burn rate needs to account for three meso-scale physical effects: (i) the density of active hot spots or burn centers; (ii) the growth of the burn fronts triggered by the burn centers; (iii) a geometric factor that accounts for the overlap of deflagration wavelets from adjacent burn centers. These effects can be combined and the burn model defined by specifying the reaction progress variable λ = g(s) as a function of a dimensionless reaction length s(t) = rbc/ℓbc, rather than by specifying an explicit burn rate. The length scale ℓbc(Ps) = [Nbc(Ps)]-1/3 is the average distance between burn centers, where Nbc is the number density of burn centers activated by the lead shock. The reaction length rbc(t) = ∫t0 D(P(t'))dt' is the distance the burn front propagates from a single burn center, where D(P) is the deflagration speed as a function of the local pressure and t is the time since the shock arrival. A key implementation issue is how to determine the lead shock strength in conjunction with a shock capturing scheme. We have developed a robust algorithm for this purpose based on the Hugoniot jump condition for the energy. The algorithm utilizes the time dependence of density, pressure and energy within each cell. The method is independent of the numerical dissipation used for shock capturing. It is local and can be used in one or more space dimensions. The burn model has a small number of parameters which can be calibrated to fit velocity gauge data from shock initiation experiments.

  19. The physics of an ignited tokamak

    International Nuclear Information System (INIS)

    Troyon, F.

    1990-10-01

    There appears to be a consensus that time has come to embark on the design and construction of the next generation of tokamaks which is at the origin of the ITER initiative. Different proposals have been made based on different appreciation as to the size of the step which can be taken, related to considerations of cost, risk and duration of construction. A class of devices which may be considered the last the very high-field, high density ALCATOR-Frascati line of tokamaks have been proposed for some years specifically for this purpose. Today there remain three such projects: Ignitor, Ignitex and CIT. The technology chosen limits the pulse length to a few seconds. These devices have evolved through the years becoming larger and much more expensive than originally anticipated, increasing the pressure to do more than just a simple demonstration of ignition. There is another class of more ambitious devices which aim at creating long burning plasmas in conditions as close as possible to those of a tokamak reactor in order to address all the plasma physics problems associated with long burn. Three such projects, NET, the european next step after JET, ITER and JIT are good examples of this approach. The ideal would be to design a device with sufficient margin to study burning plasmas over a wide range of parameters. The object of this didactic presentation is to describe the common physics basis of all these projects, compare their expected performance using present knowledge and list the physics problems associated with a burning plasma experiment. The comparison is not meant to be a judgement since the important parameter is the cost/benefit ratio which is a matter of appreciation at this stage. 6 refs., 3 figs., 1 tab

  20. National Ignition Facility Configuration Management Plan

    International Nuclear Information System (INIS)

    Cabral, S G; Moore, T L

    2002-01-01

    This Configuration Management Plan (CMP) describes the technical and administrative management process for controlling the National Ignition Facility (NIF) Project configuration. The complexity of the NIF Project (i.e., participation by multiple national laboratories and subcontractors involved in the development, fabrication, installation, and testing of NIF hardware and software, as well as construction and testing of Project facilities) requires implementation of the comprehensive configuration management program defined in this plan. A logical schematic illustrating how the plan functions is provided in Figure 1. A summary of the process is provided in Section 4.0, Configuration Change Control. Detailed procedures that make up the overall process are referenced. This CMP is consistent with guidance for managing a project's configuration provided in Department of Energy (DOE) Order 430.1, Guide PMG 10, ''Project Execution and Engineering Management Planning''. Configuration management is a formal discipline comprised of the following four elements: (1) Identification--defines the functional and physical characteristics of a Project and uniquely identifies the defining requirements. This includes selection of components of the end product(s) subject to control and selection of the documents that define the project and components. (2) Change management--provides a systematic method for managing changes to the project and its physical and functional configuration to ensure that all changes are properly identified, assessed, reviewed, approved, implemented, tested, and documented. (3) Data management--ensures that necessary information on the project and its end product(s) is systematically recorded and disseminated for decision-making and other uses. Identifies, stores and controls, tracks status, retrieves, and distributes documents. (4) Assessments and validation--ensures that the planned configuration requirements match actual physical configurations and

  1. Predicting tendency to abuse drugs based early maladaptive schemas and perfectionism in students

    Directory of Open Access Journals (Sweden)

    afsaneh mansourijalilian

    2015-03-01

    For analyzing the obtained data, stepwise regression method was used. Results: The results of this study showed that the schema, mistrust/Abuse, dependence/Incompetence, subjugation and restraint/ discipline insufficient predicting tendency to drug abuse. Conclusion: the results indicated that the negative perfectionism predicting tendency to drug abuse, however, the positive perfectionism cannot predict tendency to drug abuse

  2. What determines video game use? The impact of users’ habits, addictive tendencies, and intentions to play

    NARCIS (Netherlands)

    Hartmann, T.; Jung, Y.; Vorderer, P.A.

    2012-01-01

    The present study explores the role of intentions, habits, and addictive tendencies in people's video game use. Although both habits and addictive tendencies may determine higher amounts of video game use, the present study examines whether the impact of habits and addictive tendencies on video game

  3. UPWARD POWER TENDENCIES IN A HIERARCHY - POWER DISTANCE THEORY VERSUS BUREAUCRATIC RULE

    NARCIS (Netherlands)

    WILKE, HAM

    1993-01-01

    Two contrasting notions concerning upward power tendencies within hierarchically structured groups are investigated. Power Distance Theory assumes that people have a desire for power that results in a tendency to reduce the power distance towards a more powerful other, and this tendency is assumed

  4. Direct numerical simulations of the ignition of a lean biodiesel/air mixture with temperature and composition inhomogeneities at high pressure and intermediate temperature

    KAUST Repository

    Luong, Minhbau

    2014-11-01

    The effects of the stratifications of temperature, T, and equivalence ratio, φ{symbol}, on the ignition characteristics of a lean homogeneous biodiesel/air mixture at high pressure and intermediate temperature are investigated using direct numerical simulations (DNSs). 2-D DNSs are performed at a constant volume with the variance of temperature and equivalence ratio (T′ and φ{symbol}′) together with a 2-D isotropic velocity spectrum superimposed on the initial scalar fields. In addition, three different T s(-) φ{symbol} correlations are investigated: (1) baseline cases with T′ only or φ{symbol}′ only, (2) uncorrelated T s(-) φ{symbol} distribution, and (3) negatively-correlated T s(-) φ{symbol} distribution. It is found that the overall combustion is more advanced and the mean heat release rate is more distributed over time with increasing T′ and/or φ{symbol}′ for the baseline and uncorrelated T s(-) φ{symbol} cases. However, the temporal advancement and distribution of the overall combustion caused by T′ or φ{symbol}′ only are nearly annihilated by the negatively-correlated T s(-) φ{symbol} fields. The chemical explosive mode and Damköhler number analyses verify that for the baseline and uncorrelated T s(-) φ{symbol} cases, the deflagration mode is predominant at the reaction fronts for large T′ and/or φ{symbol}′. On the contrary, the spontaneous ignition mode prevails for cases with small T′ or φ{symbol}′, especially for cases with negative T s(-) φ{symbol} correlations, and hence, simultaneous auto-ignition occurs throughout the entire domain, resulting in an excessive rate of heat release. It is also found that turbulence with large intensity, u′, and a short time scale can effectively smooth out initial thermal and compositional fluctuations such that the overall combustion is induced primarily by spontaneous ignition. Based on the present DNS results, the generalization of the effects of T′, φ{symbol}′, and u

  5. A case of spontaneous ventriculocisternostomy

    International Nuclear Information System (INIS)

    Yamane, Kanji; Yoshimoto, Hisanori; Harada, Kiyoshi; Uozumi, Tohru; Kuwabara, Satoshi.

    1983-01-01

    The authors experienced a case of spontaneous ventriculocisternostomy diagnosed by CT scan with metrizamide and Conray. Patient was 23-year-old male who had been in good health until one month before admission, when he began to have headache and tinnitus. He noticed bilateral visual acuity was decreased about one week before admission and vomiting appeared two days before admission. He was admitted to our hospital because of bilateral papilledema and remarkable hydrocephalus diagnosed by CT scan. On admission, no abnormal neurological signs except for bilateral papilledema were noted. Immediately, right ventricular drainage was performed. Pressure of the ventricle was over 300mmH 2 O and CSF was clear. PVG and PEG disclosed an another cavity behind the third ventricle, which was communicated with the third ventricle, and occlusion of aqueduct of Sylvius. Metrizamide CT scan and Conray CT scan showed a communication between this cavity and quadrigeminal and supracerebellar cisterns. On these neuroradiological findings, the diagnosis of obstructive hydrocephalus due to benign aqueduct stenosis accompanied with spontaneous ventriculocisternostomy was obtained. Spontaneous ventriculocisternostomy was noticed to produce arrest of hydrocephalus, but with our case, spontaneous regression of such symptoms did not appeared. By surgical ventriculocisternostomy (method by Torkildsen, Dandy, or Scarff), arrest of hydrocephalus was seen in about 50 to 70 per cent, which was the same results as those of spontaneous ventriculocisternostomy. It is concluded that VP shunt or VA shunt is thought to be better treatment of obstructive hydrocephalus than the various kinds of surgical ventriculocisternostomy. (J.P.N.)

  6. Optical antenna enhanced spontaneous emission.

    Science.gov (United States)

    Eggleston, Michael S; Messer, Kevin; Zhang, Liming; Yablonovitch, Eli; Wu, Ming C

    2015-02-10

    Atoms and molecules are too small to act as efficient antennas for their own emission wavelengths. By providing an external optical antenna, the balance can be shifted; spontaneous emission could become faster than stimulated emission, which is handicapped by practically achievable pump intensities. In our experiments, InGaAsP nanorods emitting at ∼ 200 THz optical frequency show a spontaneous emission intensity enhancement of 35 × corresponding to a spontaneous emission rate speedup ∼ 115 ×, for antenna gap spacing, d = 40 nm. Classical antenna theory predicts ∼ 2,500 × spontaneous emission speedup at d ∼ 10 nm, proportional to 1/d(2). Unfortunately, at d antenna efficiency drops below 50%, owing to optical spreading resistance, exacerbated by the anomalous skin effect (electron surface collisions). Quantum dipole oscillations in the emitter excited state produce an optical ac equivalent circuit current, I(o) = qω|x(o)|/d, feeding the antenna-enhanced spontaneous emission, where q|x(o)| is the dipole matrix element. Despite the quantum-mechanical origin of the drive current, antenna theory makes no reference to the Purcell effect nor to local density of states models. Moreover, plasmonic effects are minor at 200 THz, producing only a small shift of antenna resonance frequency.

  7. Linear induction accelerator requirements for ion fast ignition

    Energy Technology Data Exchange (ETDEWEB)

    Logan, G.

    1998-01-26

    Fast ignition (fast heating of DT cores afief compression) reduces driver energy (by 10 X or more) by reducing the implosion velocity and energy for a given fuel compression ratio. For any type of driver that can deliver the ignition energy fast enough, fast ignition increases the target gain compared to targets using fast implosions for central ignition, as long as the energy to heat the core after compression is comparable to or less than the slow compression energy, and as long as the coupling efficiency of the fast ignitor beam to heat the core is comparable to the overall efficiency of compressing the core (in terms of beam energy-to-DT-efficiency). Ion driven fast ignition, compared to laser-driven fast ignition, has the advantage of direct (dE/dx) deposition of beam energy to the DT, eliminating inefficiencies for conversion into hot electrons, and direct ion heating also has a more favorable deposition profile with the Bragg-peak near the end of an ion range chosen to be deep inside a compressed DT core. While Petawatt laser experiments at LLNL have demonstrated adequate light-to-hot-electron conversion efficiency, it is not yet known if light and hot electrons can channel deeply enough to heat a small portion of a IOOOxLD compressed DT core to ignition. On the other hand, lasers with chirped-pulse amplification giving thousand-fold pulse compressions have been demonstrated to produce the short pulses, small focal spots and Petawatt peak powers approaching those required for fast ignition, whereas ion accelerators that can produce sufficient beam quality for similar compression ratios and focal spot sizes of ion bunches have not yet been demonstrated, where an imposed coherent velocity tilt plays the analogous role for beam compression as does frequency chirp with lasers. Accordingly, it is the driver technology, not the target coupling physics, that poses the main challenge to ion-driven fast ignition. As the mainline HIF program is concentrating on

  8. Development of Augmented Spark Impinging Igniter System for Methane Engines

    Science.gov (United States)

    Marshall, William M.; Osborne, Robin J.; Greene, Sandra E.

    2017-01-01

    The Lunar Cargo Transportation and Landing by Soft Touchdown (Lunar CATALYST) program is establishing multiple no-funds-exchanged Space Act Agreement (SAA) partnerships with U.S. private sector entities. The purpose of this program is to encourage the development of robotic lunar landers that can be integrated with U.S. commercial launch capabilities to deliver payloads to the lunar surface. As part of the efforts in Lander Technologies, NASA Marshall Space Flight Center (MSFC) is developing liquid oxygen (LOX) and liquid methane (LCH4) engine technology to share with the Lunar CATALYST partners. Liquid oxygen and liquid methane propellants are attractive owing to their relatively high specific impulse for chemical propulsion systems, modest storage requirements, and adaptability to NASA's Journey to Mars plans. Methane has also been viewed as a possible propellant choice for lunar missions, owing to the performance benefits and as a technology development stepping stone to Martian missions. However, in the development of methane propulsion, methane ignition has historically been viewed as a high risk area in the development of such an engine. A great deal of work has been conducted in the past decade devoted to risk reduction in LOX/CH4 ignition. This paper will review and summarize the history and results of LOX/CH4 ignition programs conducted at NASA. More recently, a NASA-developed Augmented Spark Impinging (ASI) igniter body, which utilizes a conventional spark exciter system, is being tested with LOX/CH4 to help support internal and commercial engine development programs, such as those in Lunar CATALYST. One challenge with spark exciter systems, especially at altitude conditions, is the ignition lead that transmits the high voltage pulse from the exciter to the spark igniter (spark plug). The ignition lead can be prone to corona discharge, reducing the energy delivered by the spark and potentially causing non-ignition events. For the current work, a

  9. LES of an ignition sequence in a gas turbine engine

    Energy Technology Data Exchange (ETDEWEB)

    Boileau, M.; Staffelbach, G.; Cuenot, B. [CERFACS, Toulouse (France); Poinsot, T. [IMFT - CNRS, Toulouse (France); Berat, C. [Turbomeca (SAFRAN group), Bordes (France)

    2008-07-15

    Being able to ignite or reignite a gas turbine engine in a cold and rarefied atmosphere is a critical issue for many manufacturers. From a fundamental point of view, the ignition of the first burner and the flame propagation from one burner to another are phenomena that are usually not studied. The present work is a large eddy simulation (LES) of these phenomena. To simulate a complete ignition sequence in an annular chamber, LES has been applied to the full 360 geometry, including 18 burners. This geometry corresponds to a real gas turbine chamber. Massively parallel computing (700 processors on a Cray XT3 machine) was essential to perform such a large calculation. Results show that liquid fuel injection has a strong influence on the ignition times. Moreover, the rate of flame progress from burner to burner is much higher than the turbulent flame speed due to a major effect of thermal expansion. This flame speed is also strongly modified by the main burner aerodynamics due to the swirled injection. Finally, the variability of the combustor sectors and quadrant ignition times is highlighted. (author)

  10. Laser ignition of liquid petroleum gas at elevated pressures

    Science.gov (United States)

    Loktionov, E.; Pasechnikov, N.; Telekh, V.

    2017-11-01

    Recent development of laser spark plugs for internal combustion engines have shown lack of data on laser ignition of fuel mixtures at multi-bar pressures needed for laser pulse energy and focusing optimisation. Methane and hydrogen based mixtures are comparatively well investigated, but propane and butane based ones (LPG), which are widely used in vehicles, are still almost unstudied. Optical breakdown thresholds in gases decrease with pressure increase up to ca. 100 bar, but breakdown is not a sufficient condition for combustion ignition. So minimum ignition energy (MIE) becomes more important for combustion core onset, and its dependency on mixture composition and pressure has several important features. For example, unlike breakdown threshold, is poorly dependent on laser pulse length, at least in pico- and to microsecond range. We have defined experimentally the dependencies of minimum picosecond laser pulse energies (MIE related value) needed for ignition of LPG based mixtures of 1.0 to 1.6 equivalence ratios and pressure of 1.0 to 3.5 bar. In addition to expected values decrease, low-energy flammability range broadening has been found at pressure increase. Laser ignition of LPG in Wankel rotary engine is reported for the first time.

  11. Turbulent spark-jet ignition in SI gas fuelled engine

    Directory of Open Access Journals (Sweden)

    Pielecha Ireneusz

    2017-01-01

    Full Text Available The article contains a thermodynamic analysis of a new combustion system that allows the combustion of stratified gas mixtures with mean air excess coefficient in the range 1.4-1.8. Spark ignition was used in the pre-chamber that has been mounted in the engine cylinder head and contained a rich mixture out of which a turbulent flow of ignited mixture is ejected. It allows spark-jet ignition and the turbulent combustion of the lean mixture in the main combustion chamber. This resulted in a two-stage combustion system for lean mixtures. The experimental study has been conducted using a single-cylinder test engine with a geometric compression ratio ε = 15.5 adapted for natural gas supply. The tests were performed at engine speed n = 2000 rpm under stationary engine load when the engine operating parameters and toxic compounds emissions have been recorded. Analysis of the results allowed to conclude that the evaluated combustion system offers large flexibility in the initiation of charge ignition through an appropriate control of the fuel quantities supplied into the pre-chamber and into the main combustion chamber. The research concluded with determining the charge ignition criterion for a suitably divided total fuel dose fed to the cylinder.

  12. Ignition of hydrocarbon-air supersonic flow by volumetric ionization

    Science.gov (United States)

    Goldfeld, Marat A.; Pozdnyakov, George A.

    2015-11-01

    The paper describes the results of the electron-beam initiation of the combustion in the mixtures of hydrogen, natural gas or kerosene vapors with air. Electron beam characteristics were studied in closed volume with immobile gas. The researches included definition of an integrated current of an electronic beam, distribution of a current density and an estimation of average energy of electrons. Possibility of fuel mixtures ignition by means of this approach in the combustor at high velocity at the entrance was demonstrated. Experiments were carried out at Mach numbers of 4 and 5. Process of ignition and combustion under electron beam action was researched. It was revealed that ignition of mixture occurs after completion of electron gun operation. Data obtained have confirmed effectiveness of electron beam application for ignition of hydrogen and natural gas. The numerical simulation of the combustion of mixture in channel was carried out by means of ANSYS CFD 12.0 instrumentation on the basis of Reynolds averaged Navier-Stokes equation using SST/k-ω turbulence model. For combustion modeling, a detailed kinetic scheme with 38 reactions of 8 species was implemented taking into account finite rate chemistry. Computations have shown that the developed model allow to predict ignition of a mixture and flame propagation even at low flow temperatures.

  13. Low fuel convergence path to ignition on the NIF

    Science.gov (United States)

    Schmitt, M. J.; Molvig, Kim; Gianakon, T. A.; Woods, C. N.; Krasheninnikova, N. S.; Hsu, S. C.; Schmidt, D. W.; Dodd, E. S.; Zylstra, Alex; Scheiner, B.; McKenty, P.; Campbell, E. M.; Froula, D.; Betti, R.; Michel, T.

    2017-10-01

    A novel concept for achieving ignition on the NIF is proposed that obviates current issues plaguing single-shell high-convergence capsules. A large directly-driven Be shell is designed to robustly implode two nested internal shells by efficiently converting 1.7MJ of laser energy from a 6 ns, low intensity laser pulse, into a 1 ns dynamic pressure pulse to ignite and burn a central liquid DT core after a fuel convergence of only 9. The short, low intensity laser pulse mitigates LPI allowing more uniform laser drive of the target and eliminates hot e-, preheat and laser zooming issues. Preliminary rad-hydro simulations predict ignition initiation with 90% maximum inner shell velocity, before deceleration Rayleigh-Taylor growth can cause significant pusher shell mix into the compressed DT fuel. The gold inner pusher shell reduces pre-ignition radiation losses from the fuel allowing ignition to occur at 2.5keV. Further 2D simulations show that the short pulse design results in a spatially uniform kinetic drive that is tolerant to variations in laser cone power. A multi-pronged effort, in collaboration with LLE, is progressing to optimize this design for NIF's PDD laser configuration. Work performed under the auspices of the U.S. Dept. of Energy by the Los Alamos National Security, LLC, Los Alamos National Laboratory under contract DE-FG02-051ER54810.

  14. Spontaneous subcapsular and perirrenal hemorrhage

    International Nuclear Information System (INIS)

    Fuster, M.J.; Saez, J.; Perez-Paya, F.J.; Fernandez, F.

    1997-01-01

    To assess the role of CT in the etiologic diagnosis of spontaneous subcapsular and perirrenal hemorrhage. The CT findings are described in 13 patients presenting subcapsular and perirrenal hemorrhage. Those patients in whom the bleeding was not spontaneous were excluded. Surgical confirmation was obtained in nine cases. In 11 of the 13 cases (84.6%), involving five adenocarcinomas, five angiomyolipoma, two complicated cysts and one case of panarterities nodosa, CT disclosed the underlying pathology. In two cases (15.4%), it only revealed the extension of the hematoma, but gave no clue to its origin. CT is the technique of choice when spontaneous subcapsular and perirrenal hemorrhage is suspected since, in most cases, it reveals the underlying pathology. (Author)

  15. Tendencies of development of the world market of business tourism

    Directory of Open Access Journals (Sweden)

    Dekhtyar Nadiya A.

    2014-01-01

    Full Text Available The goal of the article is detection of common tendencies of MICE (Meetings, Incentives, Conferences, and Exhibitions industry functioning and identification of directions of development of the national market of business tourism. The article considers the problems of the Ukrainian business tourism at this stage, provides a review of recommendations regarding increase of competitiveness of the national tourist product, conducts a statistical study of main macro-economic indicators of the world market of tourist services and segment of business tourism as one of its most important components, conducts analysis of dynamics of the industry development using examples of the leading countries of the world. A special attention is paid to exhibition activity – the most large scale element of the MICE industry. In the result of the study the article reveals changes in ratings of indicators of functioning of the sphere of business tourism in some countries, lists leading exporters and importers of tourist products on the basis of data of the World Travel and Tourism Council and the World Bank, and identifies position of Ukraine at separate segments of the market of business tourism, due to which it makes a recommendation to use the niche strategy. Prospects of further studies in this direction are analysis of interrelations between basic indicators of development of the world industry of business tourism with the use of economic and mathematical methods and construction of forecast models by micro-regions of the world.

  16. Ordering tendencies and electronic properties in quaternary Heusler derivatives

    Science.gov (United States)

    Neibecker, Pascal; Gruner, Markus E.; Xu, Xiao; Kainuma, Ryosuke; Petry, Winfried; Pentcheva, Rossitza; Leitner, Michael

    2017-10-01

    The phase stabilities and ordering tendencies in the quaternary full-Heusler alloys NiCoMnAl and NiCoMnGa have been investigated by in situ neutron diffraction, calorimetry, and magnetization measurements. NiCoMnGa was found to adopt the L 21 structure, with distinct Mn and Ga sublattices but a common Ni-Co sublattice. A second-order phase transition to the B 2 phase with disorder also between Mn and Ga was observed at 1160 K . In contrast, in NiCoMnAl slow cooling or low-temperature annealing treatments are required to induce incipient L 21 ordering, otherwise the system displays only B 2 order. Linked to L 21 ordering, a drastic increase in the magnetic transition temperature was observed in NiCoMnAl, while annealing affected the magnetic behavior of NiCoMnGa only weakly due to the low degree of quenched-in disorder. First principles calculations were employed to study the thermodynamics as well as order-dependent electronic properties of both compounds. It was found that a near half-metallic pseudogap emerges in the minority spin channel only for the completely ordered Y structure. However, this structure is energetically unstable compared to a tetragonal structure with alternating layers of Ni and Co, which is predicted to be the low-temperature ground state. The experimental inaccessibility of the totally ordered structures is explained by kinetic limitations due to the low ordering energies.

  17. Monist and Dualist Tendencies in Platonism before Plotinus

    Directory of Open Access Journals (Sweden)

    Dillon, John

    2015-04-01

    Full Text Available The author argues that the Platonism that Plotinus inherits – setting aside Ammonius Saccas, of whom we know all too little – is by the later second century distinctly dualist in tendency, and is able, especially in the case of Plutarch, to quote Plato to its purpose. Plato himself, though, as the author maintains, is, despite appearances to the contrary, what one might term a ‘modified monist’. That is to say, he fully recognizes the degree of imperfection and evil in the world, and holds it to be ineradicable, but he does not in the last resort believe in a positive countervailing force to the Good or the One. What we have is simply a negative force, whether Indefinite Dyad, disorderly World-Soul, or Receptacle, which is an inevitable condition of their being a world at all, but which, as a side-effect of introducing diversity, generates various sorts of imperfection. It is this scenario that justifies his follower Hermodorus in declaring that Plato recognizes only a single first principle, and it to this sort of monism – if anything, in a more pronounced form – that Plotinus returns. The article is published in a Russian translation in Vol. II, issue 1

  18. Research status and development tendency of medical psychology

    Directory of Open Access Journals (Sweden)

    Li-yi ZHANG

    2011-12-01

    Full Text Available Objective The present study aims to review the research status and development tendency of military medical psychology in China and abroad and proposes the development of medical psychology research in the Chinese military.Methods A literature search method was adopted to find and review major literature on military medical psychology,from basic studies,discipline construction,professional teaching,to the service force in the last 10 years.Results The last 10 years witnessed much development in the medical psychological branches,such as physiological psychology,mental measurement,psychological counseling,and treatment.With these developments,military medical psychology achieved much with regard to the reserve of talented men,the mental measurement for officers and soldiers,mental intervention for military stress,and psychological rehabilitation after stress.Conclusion Thus,future studies on military medical psychology should focus on intensifying the training of medical psychology experts to promote the study on the etiology of military mental diseases and on the prevention and treatment of mental disorders caused by wars.

  19. Tendency of nuclear pumps for PWR primary system

    International Nuclear Information System (INIS)

    Shibata, Takeshi

    1976-01-01

    At present, large PWR power stations of more than 1,000 MW are successively constructed, and the pumps used there have become large. The progress and tendency of the technical development of main pumps in primary system are described. The increase of the capacity of power stations is accomplished by increasing the circulating coolant quantity per loop or the number of loops. Same standard primary coolant pumps are employed in the plants from 500 to 1,100 MW. The type of primary coolant pumps changed from canned type to shaft seal type, and the advantages of the shaft seal type are cheap production cost, high efficiency, and the easy utilization of inertia force. The bearings and shaft seals are thermally insulated from primary coolant. As for auxiliary pumps, reciprocating filling-up pumps and centrifugal high pressure injection pumps are used for 500 MW plants, but only centrifugal pumps are used for both purposes in 800 MW plants, and in 1,100 MW plants, the pumps of both types for separate purposes and centrifugal pumps for combined purposes are installed. Horizontal or vertical pumps of same type are used as containment vessel-spraying pumps and excess heat-eliminating pumps. The type of boric acid pumps changed from canned type to mechanical seal type. (Kako, I.)

  20. Duration of increased bleeding tendency after cessation of aspirin therapy.

    LENUS (Irish Health Repository)

    Cahill, Ronan A

    2012-02-03

    BACKGROUND: Aspirin has a significant effect on hemostasis, so it is often recommended that patients taking aspirin discontinue treatment before elective surgery. While off aspirin, these patients may be at risk of thrombosis. The optimum period of time that aspirin should be withheld is controversial. The aim of this study was to establish the duration of the antihemostatic effect of prolonged aspirin therapy. STUDY DESIGN: In a prospective study, 51 healthy volunteers were randomly assigned into 3 groups, each receiving an identical tablet for 14 days. One group received a placebo tablet; individuals in the other two groups received either 75 mg or 300 mg of aspirin once a day. Template bleeding times and specific platelet function testing (using the PFA-100; Dade Behring) were carried out on subjects before therapy and again after its completion until they returned to baseline. RESULTS: Thirty-eight volunteers complied sufficiently with the protocol to provide useful results. All bleeding times normalized within 96 hours and all platelet function tests within 144 hours after stopping aspirin. There was no demonstrable hemostatic defect in any volunteer persisting by or beyond the sixth day after treatment cessation. There was no apparent difference in duration of effect between those taking either 75 mg or 300 mg of aspirin. CONCLUSIONS: This study uses sensitive measures of platelet function to demonstrate the duration of increased bleeding tendency after withdrawal of aspirin therapy. It supports discontinuation of aspirin therapy 5 days before elective surgery (with the operation being performed on the sixth day).

  1. User Adoption Tendency Modeling for Social Contextual Recommendation

    Directory of Open Access Journals (Sweden)

    Wang Zhisheng

    2015-01-01

    Full Text Available Most of studies on the existing recommender system for Netflix-style sites (scenarios with explicit user feedback focus on rating prediction, but few have systematically analyzed users’ motivations to make decisions on which items to rate. In this paper, the authors study the difficult and challenging task Item Adoption Prediction (IAP for predicting the items users will rate or interact with. It is not only an important supplement to previous works, but also a more realistic requirement of recommendation in this scenario. To recommend the items with high Adoption Tendency, the authors develop a unified model UATM based on the findings of Marketing and Consumer Behavior. The novelty of the model in this paper includes: First, the authors propose a more creative and effective optimization method to tackle One-Class Problem where only the positive feedback is available; second, the authors systematically and conveniently integrate the user adoption information (both explicit and implicit feedbacks included and the social contextual information with quantitatively characterizing different users’ personal sensitivity to various social contextual influences.

  2. Expressionism as the radical creative tendency in architecture

    Directory of Open Access Journals (Sweden)

    Alfirević Đorđe

    2012-01-01

    Full Text Available The concepts of expression, expressiveness and expressionism present the key terms on which contemporary architectural and artistic works are based. Although these are essential esthetic categories, the explanations of these concepts are not clearly defined in scientific and theoretical texts. When the term expressionism is mentioned, it often implies the stylistic direction in architecture and the arts, which was created and lasted until the beginning of the XX century in northern Europe (especially in Germany and the Netherlands, and in which the artists have twisted the reality with exaggerated and energetic strokes to express their inner visions, ideas or emotions. However, contemporary theoretical discussions in the arts and architecture point to the manifestation of expressionism in other periods and contexts as well. The basic aim of the text is a critical discourse of interrelations among esthetic categories of expression, expressiveness and expressionism; reexamination of their positions and roles in the system of visual expression, as well as the examination of the starting hypothesis in research, according to which expressionism in architecture is a radical creative tendency with distinctive choleric-sanguine characteristics.

  3. The Global Tendencies in the Fuel Sector: Challenges for Ukraine

    Directory of Open Access Journals (Sweden)

    Lelyuk Oleksiy V.

    2017-08-01

    Full Text Available The article presents an analysis of the main competition-generating factors in the development of the world fuel sector: demand, supply, stocks and prices. Certain global trends show the multi-directional development of both developed and developing countries. There are the following differences: first, the OECD countries can target their own fuel-energy balances for the gradual replacement of hydrocarbons by renewable energy sources, while the non-OECD countries remain supporters of cheap and traditional energy resources; second, the OECD countries do not reduce the rate of production of conventional energy resources, and the non-OECD countries meet their growing needs, among other ways, at the expense of the aforementioned countries; third, there is a significant disproportion in the energy balance in the OECD countries, which is covered by imported hydrocarbons, whereas in the non-OECD countries there is a greater kinship between sources of energy security. At the same time, the tendency towards globalization of the market for traditional hydrocarbons is unique to the oil market, while only gaining momentum in the natural gas market, and in the coal market the scale of world trade is negligible.

  4. Ignition and Combustion of Pulverized Coal and Biomass under Different Oxy-fuel O2/N2 and O2/CO2 Environments

    Science.gov (United States)

    Khatami Firoozabadi, Seyed Reza

    -anthracite and lignites mostly experienced heterogeneous ignition in either O2/N2 or O2/CO2 atmospheres in both flow conditions. Replacing the N2 by CO 2 slightly increased the ignition temperature (30--40K). Ignition temperatures increased with the enhancement of coal rank in either air or oxy-fuel combustion conditions. However, increasing oxygen mole fraction decreased the ignition temperature for all coals. The ignition delay of coal particles was prolonged in the slow-heating O2/CO2 atmospheres, relative to the faster-heating O2/N2 atmospheres, particularly at high-diluent mole fractions. At higher O2 mole fractions, ignition delays decreased in both environments. Higher rank fuels such as anthracite and semi-anthracite experienced higher ignition delays while lower rank fuels such as lignite and biomasses experienced lower igniton delay times. In combustion, fuel particles were observed to burn in different modes, such as two-mode, or in one-mode combustion, depending on their rank and the furnace conditions. Strong tendencies were observed for all fuels to burn in one-mode when N2 was replaced by CO2, and when O 2 mole fraction increased in both environments. Moreover, increasing the coal rank, from lignite to bituminous, enhanced the tendency of coal particles to exhibit a two-mode combustion behavior. Particle luminosity, fragmentation and deduced temperatures were higher in O2/N2 than in O2/CO2 atmospheres, and corresponding burnout times were shorter, at the same O2 mole fractions. Particle luminosity and temperatures increased with increasing O2 mole fractions in both N2 and in CO2 background gases, and corresponding burnout times decreased with increasing O2 mole fractions. Bituminous coal particles swelled, whereas sub-bituminous coal particles exhibited limited fragmentation prior to and during the early stages of combustion. Lignite coal particles fragmented extensively and burned in one-mode regardless of the O2 mole fraction and the background gas. The timing

  5. Spontaneous isolated celiac artery dissection

    Directory of Open Access Journals (Sweden)

    Tuba Cimilli Ozturk

    2011-01-01

    Full Text Available Dyspepsia with mild, stabbing epigastric discomfort without history of trauma is a very common symptom that emergency physicians see in their daily practice. Vascular emergencies, mostly the aortic dissection and aneurysm, are always described in the differential diagnosis with persistent symptoms. Isolated celiac artery dissection occurring spontaneously is a very rare diagnosis. The involvement of branch vessels is generally observed and patients show various clinical signs and symptoms according to the involved branch vessel. Here we are presenting a case with spontaneous isolated celiac artery dissection, without any branch vessel involvement or visceral damage, detected by computed tomography scans taken on admission.

  6. Spontaneous waves in muscle fibres

    Energy Technology Data Exchange (ETDEWEB)

    Guenther, Stefan; Kruse, Karsten [Department of Theoretical Physics, Saarland University, 66041 Saarbruecken (Germany); Max Planck Institute for the Physics of Complex Systems, Noethnitzer Street 38, 01187 Dresden (Germany)

    2007-11-15

    Mechanical oscillations are important for many cellular processes, e.g. the beating of cilia and flagella or the sensation of sound by hair cells. These dynamic states originate from spontaneous oscillations of molecular motors. A particularly clear example of such oscillations has been observed in muscle fibers under non-physiological conditions. In that case, motor oscillations lead to contraction waves along the fiber. By a macroscopic analysis of muscle fiber dynamics we find that the spontaneous waves involve non-hydrodynamic modes. A simple microscopic model of sarcomere dynamics highlights mechanical aspects of the motor dynamics and fits with the experimental observations.

  7. Optimization of the NIF ignition point design hohlraum

    Science.gov (United States)

    Callahan, D. A.; Hinkel, D. E.; Berger, R. L.; Divol, L.; Dixit, S. N.; Edwards, M. J.; Haan, S. W.; Jones, O. S.; Lindl, J. D.; Meezan, N. B.; Michel, P. A.; Pollaine, S. M.; Suter, L. J.; Town, R. P. J.; Bradley, P. A.

    2008-05-01

    In preparation for the start of NIF ignition experiments, we have designed a porfolio of targets that span the temperature range that is consistent with initial NIF operations: 300 eV, 285 eV, and 270 eV. Because these targets are quite complicated, we have developed a plan for choosing the optimum hohlraum for the first ignition attempt that is based on this portfolio of designs coupled with early NIF experiements using 96 beams. These early experiments will measure the laser plasma instabilities of the candidate designs and will demonstrate our ability to tune symmetry in these designs. These experimental results, coupled with the theory and simulations that went into the designs, will allow us to choose the optimal hohlraum for the first NIF ignition attempt.

  8. Optimization of the NIF ignition point design hohlraum

    International Nuclear Information System (INIS)

    Callahan, D A; Hinkel, D E; Berger, R L; Divol, L; Dixit, S N; Edwards, M J; Haan, S W; Jones, O S; Lindl, J D; Meezan, N B; Michel, P A; Pollaine, S M; Suter, L J; Town, R P J; Bradley, P A

    2008-01-01

    In preparation for the start of NIF ignition experiments, we have designed a porfolio of targets that span the temperature range that is consistent with initial NIF operations: 300 eV, 285 eV, and 270 eV. Because these targets are quite complicated, we have developed a plan for choosing the optimum hohlraum for the first ignition attempt that is based on this portfolio of designs coupled with early NIF experiements using 96 beams. These early experiments will measure the laser plasma instabilities of the candidate designs and will demonstrate our ability to tune symmetry in these designs. These experimental results, coupled with the theory and simulations that went into the designs, will allow us to choose the optimal hohlraum for the first NIF ignition attempt

  9. Propellant Flow Actuated Piezoelectric Igniter for Combustion Engines

    Science.gov (United States)

    Wollen, Mark A. (Inventor)

    2015-01-01

    A propellant flow actuated piezoelectric igniter device using one or more hammer balls retained by one or more magnets, or other retaining method, until sufficient fluid pressure is achieved to release and accelerate the hammer ball, such that it impacts a piezoelectric crystal to produce an ignition spark. Certain preferred embodiments provide a means for repetitively capturing and releasing the hammer ball after it impacts one or more piezoelectric crystals, thereby oscillating and producing multiple, repetitive ignition sparks. Furthermore, an embodiment is presented for which oscillation of the hammer ball and repetitive impact to the piezoelectric crystal is maintained without the need for a magnet or other retaining mechanism to achieve this oscillating impact process.

  10. Tokamak power reactor ignition and time dependent fractional power operation

    International Nuclear Information System (INIS)

    Vold, E.L.; Mau, T.K.; Conn, R.W.

    1986-06-01

    A flexible time-dependent and zero-dimensional plasma burn code with radial profiles was developed and employed to study the fractional power operation and the thermal burn control options for an INTOR-sized tokamak reactor. The code includes alpha thermalization and a time-dependent transport loss which can be represented by any one of several currently popular scaling laws for energy confinement time. Ignition parameters were found to vary widely in density-temperature (n-T) space for the range of scaling laws examined. Critical ignition issues were found to include the extent of confinement time degradation by alpha heating, the ratio of ion to electron transport power loss, and effect of auxiliary heating on confinement. Feedback control of the auxiliary power and ion fuel sources are shown to provide thermal stability near the ignition curve

  11. Photothermally activated motion and ignition using aluminum nanoparticles

    International Nuclear Information System (INIS)

    Abboud, Jacques E.; Chong Xinyuan; Zhang Mingjun; Zhang Zhili; Jiang Naibo; Roy, Sukesh; Gord, James R.

    2013-01-01

    The aluminum nanoparticles (Al NPs) are demonstrated to serve as active photothermal media, to enhance and control local photothermal energy deposition via the photothermal effect activated by localized surface plasmon resonance (LSPR) and amplified by Al NPs oxidation. The activation source is a 2-AA-battery-powered xenon flash lamp. The extent of the photothermally activated movement of Al NPs can be ∼6 mm. Ignition delay can be ∼0.1 ms. Both scanning electron microscopy and energy-dispersive X-ray spectroscopy measurements of motion-only and after-ignition products confirm significant Al oxidation occurs through sintering and bursting after the flash exposure. Simulations suggest local heat generation is enhanced by LSPR. The positive-feedback effects from the local heat generation amplified by Al oxidation produce a large increase in local temperature and pressure, which enhances movement and accelerates ignition.

  12. Remote ignitability analysis of high-level radioactive waste

    International Nuclear Information System (INIS)

    Lundholm, C.W.; Morgan, J.M.; Shurtliff, R.M.; Trejo, L.E.

    1992-09-01

    The Idaho Chemical Processing Plant (ICPP), was used to reprocess nuclear fuel from government owned reactors to recover the unused uranium-235. These processes generated highly radioactive liquid wastes which are stored in large underground tanks prior to being calcined into a granular solid. The Resource Conservation and Recovery Act (RCRA) and state/federal clean air statutes require waste characterization of these high level radioactive wastes for regulatory permitting and waste treatment purposes. The determination of the characteristic of ignitability is part of the required analyses prior to calcination and waste treatment. To perform this analysis in a radiologically safe manner, a remoted instrument was needed. The remote ignitability Method and Instrument will meet the 60 deg. C. requirement as prescribed for the ignitability in method 1020 of SW-846. The method for remote use will be equivalent to method 1020 of SW-846

  13. Shock timing on the National Ignition Facility: First experiments

    Directory of Open Access Journals (Sweden)

    Celliers P.M.

    2013-11-01

    Full Text Available An experimental campaign to tune the initial shock compression sequence of capsule implosions on the National Ignition Facility (NIF was initiated in late 2010. The experiments use a NIF ignition-scale hohlraum and capsule that employs a re-entrant cone to provide optical access to the shocks as they propagate in the liquid deuterium-filled capsule interior. The strength and timing of the shock sequence is diagnosed with velocity interferometry that provides target performance data used to set the pulse shape for ignition capsule implosions that follow. From the start, these measurements yielded significant new information on target performance, leading to improvements in the target design. We describe the results and interpretation of the initial tuning experiments.

  14. Recent Advances in Cigarette Ignition Propensity Research and Development.

    Science.gov (United States)

    Alpert, Hillel R; O'Connor, Richard J; Spalletta, Ron; Connolly, Gregory N

    2010-04-01

    Major U.S. cigarette companies for decades conducted research and development regarding cigarette ignition propensity which has continued beyond fire safety standards for cigarettes that have recently been legislated. This paper describes recent scientific advances and technological development based on a comprehensive review of the physical, chemical, and engineering sciences, public health, and trade literature, U.S. and international patents, and research in the tobacco industry document libraries.Advancements since the first implementation of standards have made been in: a) understanding the key parameters involved in cigarette smoldering combustion and ignition of substrates; b) developing new cigarette and paper wrapper designs to reduce ignition propensity, including banded and non-banded cigarette paper approaches, c) assessing toxicology, and d) measuring performance. While the implications of manufacturers' non-safety related aims are of concern, this research indicates possible alternative designs should experience with fire loss and existing technologies on the market suggest need for improvement.

  15. WILDFIRE IGNITION RESISTANCE ESTIMATOR WIZARD SOFTWARE DEVELOPMENT REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, M.; Robinson, C.; Gupta, N.; Werth, D.

    2012-10-10

    This report describes the development of a software tool, entitled “WildFire Ignition Resistance Estimator Wizard” (WildFIRE Wizard, Version 2.10). This software was developed within the Wildfire Ignition Resistant Home Design (WIRHD) program, sponsored by the U. S. Department of Homeland Security, Science and Technology Directorate, Infrastructure Protection & Disaster Management Division. WildFIRE Wizard is a tool that enables homeowners to take preventive actions that will reduce their home’s vulnerability to wildfire ignition sources (i.e., embers, radiant heat, and direct flame impingement) well in advance of a wildfire event. This report describes the development of the software, its operation, its technical basis and calculations, and steps taken to verify its performance.

  16. Characterizing pyrotechnic igniter output with high-speed schlieren imaging

    Science.gov (United States)

    Skaggs, M. N.; Hargather, M. J.; Cooper, M. A.

    2017-01-01

    Small-scale pyrotechnic igniter output has been characterized using a high-speed schlieren imaging system for observing critical features of the post-combustion flow. The diagnostic, with laser illumination, was successfully applied towards the quantitative characterization of the output from Ti/KClO_4 and TiH_{1.65}/KClO_4 pyrotechnic igniters. The high-speed image sequences showed shock motion, burned gas expansion, and particle motion. A statistical-based analysis methodology for tracking the full-field shock motion enabled straightforward comparisons across the experimental parameters of pyrotechnic material and initial density. This characterization of the mechanical energy of the shock front within the post-combustion environment is a necessary addition to the large body of literature focused on pyrotechnic combustion behavior within the powder bed. Ultimately, understanding the role that the combustion behavior has on the resulting multiphase environment is required for tailored igniter development and comparative performance assessments.

  17. Ignition characteristics of 2-methyltetrahydrofuran: An experimental and kinetic study

    KAUST Repository

    Tripathi, Rupali

    2016-10-15

    The present paper elucidates oxidation behavior of 2-methyltetrahydrofuran (2-MTHF), a novel second-generation biofuel. New experimental data sets for 2-MTHF including ignition delay time measurements in two different combustion reactors, i.e. rapid compression machine and high-pressure shock tube, are presented. Measurements for 2-MTHF/oxidizer/diluent mixtures were performed in the temperature range of . 639-1413 K, at pressures of 10, 20, and 40 bar, and at three different equivalence ratios of 0.5, 1.0, and 2.0. A detailed chemical kinetic model describing both low-and high-temperature chemistry of 2-MTHF was developed and validated against new ignition delay measurements and already existing flame species profiles and ignition delay measurements. The mechanism provides satisfactory agreement with the experimental data. For identifying key reactions at various combustion conditions and to attain a better understanding of the combustion behavior, reaction path and sensitivity analyses were performed.

  18. Shot Automation for the National Ignition Facility

    International Nuclear Information System (INIS)

    Lagin, L J; Bettenhausen, R C; Beeler, R G; Bowers, G A; Carey, R.; Casavant, D.D.; Cline, B.D.; Demaret, R.D.; Domyancic, D.M.; Elko, S.D.; Fisher, J.M.; Hermann, M.R.; Krammen, J.E.; Kohut, T.R.; Marshall, C.D.; Mathisen, D.G.; Ludwigsen, A.P.; Patterson, Jr. R.W.; Sanchez, R.J.; Stout, E.A.; Van Arsdall, P.J.; Van Wonterghem, B.M.

    2005-01-01

    A shot automation framework has been developed and deployed during the past year to automate shots performed on the National Ignition Facility (NIF) using the Integrated Computer Control System This framework automates a 4-8 hour shot sequence, that includes inputting shot goals from a physics model, set up of the laser and diagnostics, automatic alignment of laser beams and verification of status. This sequence consists of set of preparatory verification shots, leading to amplified system shots using a 4-minute countdown, triggering during the last 2 seconds using a high-precision timing system, followed by post-shot analysis and archiving. The framework provides for a flexible, model-based execution driven of scriptable automation called macro steps. The framework is driven by high-level shot director software that provides a restricted set of shot life cycle state transitions to 25 collaboration supervisors that automate 8-laser beams (bundles) and a common set of shared resources. Each collaboration supervisor commands approximately 10 subsystem shot supervisors that perform automated control and status verification. Collaboration supervisors translate shot life cycle state commands from the shot director into sequences of ''macro steps'' to be distributed to each of its shot supervisors. Each Shot supervisor maintains order of macro steps for each subsystem and supports collaboration between macro steps. They also manage failure, restarts and rejoining into the shot cycle (if necessary) and manage auto/manual macro step execution and collaborations between other collaboration supervisors. Shot supervisors execute macro step shot functions commanded by collaboration supervisors. Each macro step has database-driven verification phases and a scripted perform phase. This provides for a highly flexible methodology for performing a variety of NIF shot types. Database tables define the order of work and dependencies (workflow) of macro steps to be performed for a

  19. Reactive burn models and ignition & growth concept

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph S [Los Alamos National Laboratory; Shaw, Milton S [Los Alamos National Laboratory

    2010-01-01

    Plastic-bonded explosives are heterogeneous materials. Experimentally, shock initiation is sensitive to small amounts of porosity, due to the formation of hot spots (small localized regions of high temperature). This leads to the Ignition and Growth concept, introduced by Lee and Tarver in 1980, as the basis for reactive burn models. A homogeneized burn rate needs to account for three mesoscale physical effects (i) the density of burnt hot spots, which depends on the lead shock strength; (ii) the growth of the burn fronts triggered by hot spots, which depends on the local deflagration speed; (iii) a geometric factor that accounts for the overlap of deflagration wavelets from adjacent hot spots. These effects can be combined and the burn model defined by specifying the reaction progress variable {lambda}(t) as a function of a dimensionless reaction length {tau}{sub hs}(t)/{ell}{sub hs}, rather than by xpecifying an explicit burn rate. The length scale {ell}{sub hs} is the average distance between hot spots, which is proportional to [N{sub hs}(P{sub s})]{sup -1/3}, where N{sub hs} is the number density of hot spots activated by the lead shock. The reaction length {tau}{sub hs}(t) = {line_integral}{sub 0}{sup t} D(P(t'))dt' is the distance the burn front propagates from a single hot spot, where D is the deflagration speed and t is the time since the shock arrival. A key implementation issue is how to determine the lead shock strength in conjunction with a shock capturing scheme. They have developed a robust algorithm for this purpose based on the Hugoniot jump condition for the energy. The algorithm utilizes the time dependence of density, pressure and energy within each cell. The method is independent of the numerical dissipation used for shock capturing. It is local and can be used in one or more space dimensions. The burn model has a small number of parameters which can be calibrated to fit velocity gauge data from shock initiation experiments.

  20. Reactive burn models and ignition & growth concept

    Directory of Open Access Journals (Sweden)

    Shaw M.S.

    2011-01-01

    Full Text Available Plastic-bonded explosives are heterogeneous materials. Experimentally, shock initiation is sensitive to small amounts of porosity, due to the formation of hot spots (small localized regions of high temperature. This leads to the Ignition & Growth concept, introduced by LeeTarver in 1980, as the basis for reactive burn models. A homo- genized burn rate needs to account for three meso-scale physical effects: (i the density of active hot spots or burn centers; (ii the growth of the burn fronts triggered by the burn centers; (iii a geometric factor that accounts for the overlap of deflagration wavelets from adjacent burn centers. These effects can be combined and the burn model defined by specifying the reaction progress variable λ = g(s as a function of a dimensionless reaction length s(t = rbc/ℓbc, rather than by specifying an explicit burn rate. The length scale ℓbc(Ps = [Nbc(Ps]−1/3 is the average distance between burn centers, where Nbc is the number density of burn centers activated by the lead shock. The reaction length rbc(t = ∫t0 D(P(t′dt′ is the distance the burn front propagates from a single burn center, where D(P is the deflagration speed as a function of the local pressure and t is the time since the shock arrival. A key implementation issue is how to determine the lead shock strength in conjunction with a shock capturing scheme. We have developed a robust algorithm for this purpose based on the Hugoniot jump condition for the energy. The algorithm utilizes the time dependence of density, pressure and energy within each cell. The method is independent of the numerical dissipation used for shock capturing. It is local and can be used in one or more space dimensions. The burn model has a small number of parameters which can be calibrated to fit velocity gauge data from shock initiation experiments.

  1. Progress towards polar-drive ignition for the NIF

    Science.gov (United States)

    McCrory, R. L.; Betti, R.; Boehly, T. R.; Casey, D. T.; Collins, T. J. B.; Craxton, R. S.; Delettrez, J. A.; Edgell, D. H.; Epstein, R.; Frenje, J. A.; Froula, D. H.; Gatu-Johnson, M.; Glebov, V. Yu.; Goncharov, V. N.; Harding, D. R.; Hohenberger, M.; Hu, S. X.; Igumenshchev, I. V.; Kessler, T. J.; Knauer, J. P.; Li, C. K.; Marozas, J. A.; Marshall, F. J.; McKenty, P. W.; Meyerhofer, D. D.; Michel, D. T.; Myatt, J. F.; Nilson, P. M.; Padalino, S. J.; Petrasso, R. D.; Radha, P. B.; Regan, S. P.; Sangster, T. C.; Séguin, F. H.; Seka, W.; Short, R. W.; Shvydky, A.; Skupsky, S.; Soures, J. M.; Stoeckl, C.; Theobald, W.; Yaakobi, B.; Zuegel, J. D.

    2013-11-01

    The University of Rochester's Laboratory for Laser Energetics (LLE) performs direct-drive inertial confinement fusion (ICF) research. LLE's Omega Laser Facility is used to study direct-drive ICF ignition concepts, developing an understanding of the underlying physics that feeds into the design of ignition targets for the National Ignition Facility (NIF). The baseline symmetric-illumination, direct-drive-ignition target design consists of a 1.5 MJ multiple-picket laser pulse that generates four shock waves (similar to the NIF baseline indirect-drive design) and is predicted to produce a one-dimensional (1D) gain of 48. LLE has developed the polar-drive (PD) illumination concept (for NIF beams in the x-ray-drive configuration) to allow the pursuit of direct-drive ignition without significant reconfiguration of the beam paths on the NIF. Some less-invasive changes in the NIF infrastructure will be required, including new phase plates, polarization rotators, and a PD-specific beam-smoothing front end. A suite of PD ignition designs with implosion velocities from 3.5 to 4.3 × 107 cm s-1 are predicted to have significant 2D gains (Collins et al 2012 Bull. Am. Phys. Soc. 57 155). Verification of the physics basis of these simulations is a major thrust of direct-drive implosion experiments on both OMEGA and the NIF. Many physics issues are being examined with symmetric beam irradiation on OMEGA, varying the implosion parameters over a wide region of design space. Cryogenic deuterium-tritium target experiments with symmetric irradiation have produced areal densities of ˜0.3 g cm-2, ion temperatures over 3 keV, and neutron yields in excess of 20% of the ‘clean’ 1D predicted value. The inferred Lawson criterion figure of merit (Betti R. et al 2010 Phys. Plasmas 17 058102) has increased from 1.7 atm s (IAEA 2010) to 2.6 atm s.

  2. Human Papillomavirus Infection as a Possible Cause of Spontaneous Abortion and Spontaneous Preterm Delivery

    DEFF Research Database (Denmark)

    Ambühl, Lea Maria Margareta; Baandrup, Ulrik; Dybkær, Karen

    2016-01-01

    , and 10.9% (95% CI; 10.1–11.7) for umbilical cord blood. Summary estimates for HPV prevalence of spontaneous abortions and spontaneous preterm deliveries, in cervix (spontaneous abortions: 24.5%, and pretermdeliveries: 47%, resp.) and placenta (spontaneous abortions: 24.9%, and preterm deliveries: 50......%, resp.), were identified to be higher compared to normal full-term pregnancies (푃 spontaneous abortion, spontaneous preterm...

  3. Laser-induced multi-point ignition for enabling high-performance engines

    KAUST Repository

    Chung, Suk-Ho

    2015-01-01

    Various multi-point laser-induced ignition techniques were reviewed, which adopted conical cavity and prechamber configurations. Up to five-point ignitions have been achieved with significant reduction in combustion duration, demonstrating potential increase in combustion system efficiency.

  4. Microwave-Assisted Ignition for Improved Internal Combustion Engine Efficiency

    Science.gov (United States)

    DeFilippo, Anthony Cesar

    The ever-present need for reducing greenhouse gas emissions associated with transportation motivates this investigation of a novel ignition technology for internal combustion engine applications. Advanced engines can achieve higher efficiencies and reduced emissions by operating in regimes with diluted fuel-air mixtures and higher compression ratios, but the range of stable engine operation is constrained by combustion initiation and flame propagation when dilution levels are high. An advanced ignition technology that reliably extends the operating range of internal combustion engines will aid practical implementation of the next generation of high-efficiency engines. This dissertation contributes to next-generation ignition technology advancement by experimentally analyzing a prototype technology as well as developing a numerical model for the chemical processes governing microwave-assisted ignition. The microwave-assisted spark plug under development by Imagineering, Inc. of Japan has previously been shown to expand the stable operating range of gasoline-fueled engines through plasma-assisted combustion, but the factors limiting its operation were not well characterized. The present experimental study has two main goals. The first goal is to investigate the capability of the microwave-assisted spark plug towards expanding the stable operating range of wet-ethanol-fueled engines. The stability range is investigated by examining the coefficient of variation of indicated mean effective pressure as a metric for instability, and indicated specific ethanol consumption as a metric for efficiency. The second goal is to examine the factors affecting the extent to which microwaves enhance ignition processes. The factors impacting microwave enhancement of ignition processes are individually examined, using flame development behavior as a key metric in determining microwave effectiveness. Further development of practical combustion applications implementing microwave

  5. Ignition and wave processes in combustion of solids

    CERN Document Server

    Rubtsov, Nickolai M; Alymov, Michail I

    2017-01-01

    This book focuses on the application of classical combustion theory to ignition and flame propagation in solid-solid and gas-solid systems. It presents experimental investigations in the areas of local ignition, filtration combustion, self-propagating high temperature synthesis and nanopowders protection. The authors highlight analytical formulas used in different areas of combustion in solids and propose an approach based on classical combustion theory. The book attempts to analyze the basic approaches to understanding of solid-solid and solid - gas combustion presented in contemporary literature in a unified approach based on classical combustion theory. .

  6. Methane and hydrogen ignition with ethanol and butanol admixtures

    Science.gov (United States)

    Eremin, A. V.; Matveeva, N. A.; Mikheyeva, E. Yu

    2018-01-01

    This work is devoted to the investigation of combustion of simple and complex gaseous fuels: methane and hydrogen with admixtures of the most promising alcohols: ethanol and butanol. The process of ignition of investigated blends behind reflected shock waves in the temperature range of 1000–1600 K and pressure range of 4.5–6 bar was studied. The temperature dependences of ignition delay times for stoichiometric methane–oxygen–ethanol (or butanol) and hydrogen–oxygen–ethanol (or butanol) mixtures diluted in argon were obtained. The possible kinetic description is discussed.

  7. Features of a point design for Fast Ignition

    International Nuclear Information System (INIS)

    Tabak, M; Clark, D; Town, R P J; Key, M H; Amendt, P; Ho, D; Meeker, D J; Shay, H D; Lasinski, B F; Kemp, A; Divol, L; Mackinnon, A J; Patel, P; Strozzi, D; Grote, D P

    2010-01-01

    Fast Ignition is an inertial fusion scheme in which fuel is first assembled and then heated to the ignition temperature with an external heating source. In this note we consider cone and shell implosions where the energy supplied by short pulse lasers is transported to the fuel by electrons. We describe possible failure modes for this scheme and how to overcome them. In particular, we describe two sources of cone tip failure, an axis jet driven from the compressed fuel mass and hard photon preheat leaking through the implosion shell, and laser prepulse that can change the position of laser absorption and the angular distribution of the emitted electrons.

  8. Features of a point design for fast ignition

    International Nuclear Information System (INIS)

    Tabak, M.; Clark, D.; Town, R.J.; Key, M.H.; Amendt, P.; Ho, D.; Meeker, D.J.; Shay, H.D.; Lasinski, B.F.; Kemp, A.; Divol, L.; Mackinnon, A.J.; Patel, P.; Strozzi, D.; Grote, D.P.

    2009-01-01

    Fast Ignition is an inertial fusion scheme in which fuel is first assembled and then heated to the ignition temperature with an external heating source. In this note we consider cone and shell implosions where the energy supplied by short pulse lasers is transported to the fuel by electrons. We describe possible failure modes for this scheme and how to overcome them. In particular, we describe two sources of cone tip failure, an axis jet driven from the compressed fuel mass and hard photon preheat leaking through the implosion shell, and laser prepulse that can change the position of laser absorption and the angular distribution of the emitted electrons.

  9. Hydrogen as an Auxiliary Fuel in Compression-Ignition Engines

    Science.gov (United States)

    Gerrish, Harold C; Foster, H

    1936-01-01

    An investigation was made to determine whether a sufficient amount of hydrogen could be efficiently burned in a compression-ignition engine to compensate for the increase of lift of an airship due to the consumption of the fuel oil. The performance of a single-cylinder four-stroke-cycle compression-ignition engine operating on fuel oil alone was compared with its performance when various quantities of hydrogen were inducted with the inlet air. Engine-performance data, indicator cards, and exhaust-gas samples were obtained for each change in engine-operating conditions.

  10. Overview of tritium systems for the Compact Ignition Tokamak

    International Nuclear Information System (INIS)

    Bartlit, J.R.; Gruetzmacher, K.M.; Fleming, R.B.

    1987-01-01

    The Compact Ignition Tokamak (CIT) is being designed at several laboratories to produce and study fully ignited plasma discharges. The tritium systems which will be needed for CIT include fueling systems and radiation monitoring and safety systems. Design of the tritium systems is the responsibility of the Tritium Systems Test Assembly (TSTA) at Los Alamos National Laboratory. Major new tritium systems for CIT include a pellet injector, an air detritiation system and a glovebox atmosphere detritiation system. The pellet injector is being developed at Oak Ridge National Laboratory. 7 refs., 2 figs

  11. Environment, migratory tendency, phylogeny and basal metabolic rate in birds.

    Directory of Open Access Journals (Sweden)

    Walter Jetz

    Full Text Available Basal metabolic rate (BMR represents the minimum maintenance energy requirement of an endotherm and has far-reaching consequences for interactions between animals and their environments. Avian BMR exhibits considerable variation that is independent of body mass. Some long-distance migrants have been found to exhibit particularly high BMR, traditionally interpreted as being related to the energetic demands of long-distance migration. Here we use a global dataset to evaluate differences in BMR between migrants and non-migrants, and to examine the effects of environmental variables. The BMR of migrant species is significantly higher than that of non-migrants. Intriguingly, while the elevated BMR of migrants on their breeding grounds may reflect the metabolic machinery required for long-distance movements, an alternative (and statistically stronger explanation is their occupation of predominantly cold high-latitude breeding areas. Among several environmental predictors, average annual temperature has the strongest effect on BMR, with a 50% reduction associated with a 20 degrees C gradient. The negative effects of temperature variables on BMR hold separately for migrants and non-migrants and are not due their different climatic associations. BMR in migrants shows a much lower degree of phylogenetic inertia. Our findings indicate that migratory tendency need not necessarily be invoked to explain the higher BMR of migrants. A weaker phylogenetic signal observed in migrants supports the notion of strong phenotypic flexibility in this group which facilitates migration-related BMR adjustments that occur above and beyond environmental conditions. In contrast to the findings of previous analyses of mammalian BMR, primary productivity, aridity or precipitation variability do not appear to be important environmental correlates of avian BMR. The strong effects of temperature-related variables and varying phylogenetic effects reiterate the importance of

  12. Spontaneous emission by moving atoms

    International Nuclear Information System (INIS)

    Meystre, P.; Wilkens, M.

    1994-01-01

    It is well known that spontaneous emission is not an intrinsic atomic property, but rather results from the coupling of the atom to the vacuum modes of the electromagnetic field. As such, it can be modified by tailoring the electromagnetic environment into which the atom can radiate. This was already realized by Purcell, who noted that the spontaneous emission rate can be enhanced if the atom placed inside a cavity is resonant with one of the cavity is resonant with one of the cavity modes, and by Kleppner, who discussed the opposite case of inhibited spontaneous emission. It has also been recognized that spontaneous emission need not be an irreversible process. Indeed, a system consisting of a single atom coupled to a single mode of the electromagnetic field undergoes a periodic exchange of excitation between the atom and the field. This periodic exchange remains dominant as long as the strength of the coupling between the atom and a cavity mode is itself dominant. 23 refs., 6 figs

  13. Spontaneous Development of Moral Concepts

    Science.gov (United States)

    Siegal, M.

    1975-01-01

    Moral competence is more difficult to attain than scientific competence. Since language comprehension plays a central role in conceptual development, and moral language is difficult to learn, there is a common deficiency in moral conceptual development. This suggests a theory of non-spontaneous solutions to moral problems. (Author/MS)

  14. Shell theorem for spontaneous emission

    DEFF Research Database (Denmark)

    Kristensen, Philip Trøst; Mortensen, Jakob Egeberg; Lodahl, Peter

    2013-01-01

    and therefore is given exactly by the dipole approximation theory. This surprising result is a spontaneous emission counterpart to the shell theorems of classical mechanics and electrostatics and provides insights into the physics of mesoscopic emitters as well as great simplifications in practical calculations....

  15. Prediction of Spontaneous Preterm Birth

    NARCIS (Netherlands)

    Dijkstra, Karolien

    2002-01-01

    Preterm birth is a leading cause of neonatal morbidity and mortality. It is a major goal in obstetrics to lower the incidence of spontaneous preterm birth (SPB) and related neonatal morbidity and mortality. One of the principal objectives is to discover early markers that would allow us to identify

  16. EAMJ Dec. Spontaneous.indd

    African Journals Online (AJOL)

    2008-12-12

    Dec 12, 2008 ... surgical abortion at one month gestation without any complication. The second pregnancy which was a year prior resulted in a spontaneous miscarriage at two months followed by evacuation of retained products of conception with no post abortion complications. Antibiotics were taken following both.

  17. Spontaneous fission of superheavy nuclei

    Indian Academy of Sciences (India)

    the Yukawa-plus-exponential potential. The microscopic shell and pairing corrections are obtained using the Strutinsky and BCS approaches and the cranking formulae yield the inertia tensor. Finally, the WKB method is used to calculate penetrabilities and spontaneous fission half-lives. Calculations are performed for the ...

  18. Study on the Engine Electronic Ignition System Based on SCM and LabVIEW

    OpenAIRE

    Shanzhen Xu; Cheng Wang; Xuxu Dong

    2013-01-01

    To improve the operating performance of the electronic control ignition system and meet the requirement of the experiment teaching, an electronic control ignition system based on Lab VIEW and micro-controller was developed in this study. The system was composed of the ignition control circuit, signal processing circuits of various sensors and system software, which combined the functions of data acquisition, analysis and control. According to the working principle of the ignition system and w...

  19. Assessing the prospects for achieving double-shell ignition on the National Ignition Facility using vacuum hohlraums

    Science.gov (United States)

    Amendt, Peter

    2006-10-01

    The goal of demonstrating ignition on the National Ignition Facility (NIF) has motivated a revisit of double-shell (DS) [1] targets as a complementary path to the baseline cryogenic single-shell approach [2]. Benefits of DS targets include room-temperature deuterium-tritium (DT) fuel preparation, minimal hohlraum-plasma-mediated laser backscatter, low threshold-ignition temperatures (4 keV) for relaxed hohlraum x-ray flux asymmetry tolerances [3], and loose shock timing requirements. On the other hand, DS ignition presents several challenges, including room-temperature containment of high-pressure DT (790 atm) in the inner shell; strict concentricity requirements on the two shells; development of nanoporous, low-density, metallic foams for structural support of the inner shell and hydrodynamic instability mitigation; and effective control of perturbation growth on the high-Atwood number interface between the DT fuel and the high-Z inner shell. Recent progress in DS ignition target designs using vacuum hohlraums is described, offering the potential for low levels of laser backscatter from stimulated Raman and Brillouin processes. In addition, vacuum hohlraums have the operational advantages of room temperature fielding and fabrication simplicity, as well as benefiting from extensive benchmarking on the Nova and Omega laser facilities. As an alternative to standard cylindrical hohlraums, a rugby-shaped geometry is also introduced that may provide energetics and symmetry tuning benefits for more robust DS designs with yields exceeding 10 MJ for 2 MJ of 3w laser energy. The recent progress in hohlraum designs and required advanced materials development are scheduled to culminate in a prototype demonstration of a NIF-scale ignition-ready DS in 2007. [1] P. Amendt et al., PoP 9, 2221 (2002). [2] J.D. Lindl et al., PoP 11, 339 (2004). [3] M.N. Chizhkov et al., Laser Part. Beams 23, 261 (2005). In collaboration with C. Cerjan, A. Hamza, J. Milovich and H. Robey.

  20. Ignition et oxydation des particules de combustible solide pulvérisé Ignition and Oxidation of Pulverized Solid Fuel

    Directory of Open Access Journals (Sweden)

    De Soete G. G.

    2006-11-01

    Full Text Available On présente dans cet article, en utilisant la méthode du ruban chauffé, une étude de la compétition entre (1 la dévolatilisation et l'oxydation consécutive des produits de pyrolyse et (2 l'ignition de la matrice solide et sa combustion rapide. La comparaison entre le moment de l'ignition et le début de la pyrolyse permet de déterminer en fonction de la température, de la taille des particules et de la concentration en oxygène, le domaine dans lequel l'ignition d'un combustible solide pyrolysable est du type whole coal ignition (c'est-à-dire lorsque l'ignition intervient avant que la pyrolyse devienne mesurable. Les résultats suggèrent que ce type d'ignition doit s'effectuer en règle générale dans les conditions de mise en oeuvre des combustibles solides pulvérisés dans les flammes industrielles. Dans le cas de l'ignition whole coal , la vitesse de combustion de la matrice solide est inhibée dans la période qui suit l'ignition. Cette inhibition est due d'une part à la difficulté pour l'oxygène de diffuser dans les pores pendant la sortie des produits de pyrolyse, et d'autre part à la consommation préférentielle de l'oxygène dans l'oxydation des produits de pyrolyse, principalement dans le cas où cette oxydation se développe sous forme de flamme. Ce n'est que lorsque la pyrolyse s'achève que la vitesse de combustion hétérogène peut atteindre sa valeur stationnaire normale, qui est alors pratiquement identique à celle du coke. Aux températures situées entre la température d'ignition du combustible solide et la température d'extinction du coke résiduel, la combustion est incomplète, une extinction intervenant à un degré de dévolatilisation d'autant plus grande que la température est élevée. Ce phénomène s'explique qualitativement par la théorie classique d'ignition thermique lorsqu'on l'applique au cas particulier des combustibles solides pyrolysables. Les températures d'ignition ainsi que les d

  1. Experimental Study of Ignition over Impact-Driven Supersonic Liquid Fuel Jet

    Directory of Open Access Journals (Sweden)

    Anirut Matthujak

    2013-01-01

    Full Text Available This study experimentally investigates the mechanism of the ignition of the supersonic liquid fuel jet by the visualization. N-Hexadecane having the cetane number of 100 was used as a liquid for the jet in order to enhance the ignition potential of the liquid fuel jet. Moreover, the heat column and the high intensity CO2 laser were applied to initiate the ignition. The ignition over the liquid fuel jet was visualized by a high-speed digital video camera with a shadowgraph system. From the shadowgraph images, the autoignition or ignition of the supersonic liquid fuel jet, at the velocity of 1,186 m/s which is a Mach number relative to the air of 3.41, did not take place. The ignition still did not occur, even though the heat column or the high intensity CO2 laser was alone applied. The attempt to initiate the ignition over the liquid fuel jet was achieved by applying both the heat column and the high intensity CO2 laser. Observing the signs of luminous spots or flames in the shadowgraph would readily indicate the presence of ignitions. The mechanism of the ignition and combustion over the liquid fuel jet was clearly clarified. Moreover, it was found that the ignition over the supersonic liquid fuel jet in this study was rather the force ignition than being the auto-ignition induced by shock wave heating.

  2. Multivessel Spontaneous Coronary Artery Dissection in an Unlikely Patient

    Directory of Open Access Journals (Sweden)

    Waqas Jehangir

    2015-01-01

    Full Text Available When approaching the symptom of acute onset chest pain in a previously healthy 26-year-old male, anchoring heuristic presents a challenge to healthcare workers. This diagnostic error is the healthcare professional’s tendency to rely on a previous diagnosis, and, in situations where a set of symptoms might mask a rare and deadly condition, this error can prove fatal for the patient. One such condition, Spontaneous Coronary Artery Dissection (SCAD, is an uncommon and malefic presentation of coronary artery disease that can lead to myocardial infarction and sudden death. We present a case of SCAD in an otherwise healthy 26 year-old male who had been experiencing chest pain during and after sports activity. In the young, athletic male with SCAD, the danger of diagnostic error was a reality due to the broad symptomatology and the betraying demographics.

  3. Spontaneous Retropharyngeal Emphysema: A Case Report | Chi ...

    African Journals Online (AJOL)

    ... is a rare clinical condition in pediatric otolaryngology. The predominant symptoms are sore throat, odynophagia, dysphagia, and neck pain. Here, we report a case of spontaneous retropharyngeal emphysema. Keywords: Iatrogenic injury, retropharyngeal emphysema, spontaneous retropharyngeal emphysem, trauma ...

  4. La maladie de Grisel : Spontaneous atlantoaxial subluxation

    NARCIS (Netherlands)

    Meek, MF; Robinson, PH; Hermens, RAEC

    Objective: "La maladie de Grisel" (Grisel's syndrome) is a spontaneously occurring atlantoaxial subluxation with torticollis. We present a case of atlantoaxial subluxation occurring in a 20-year period of pharyngoplasty surgery. The occurrence of a "spontaneous" atlantoaxial subluxation after oral

  5. Preventing disaster: Home ignitability in the wildland-urban interface

    Science.gov (United States)

    Jack D. Cohen

    2000-01-01

    Wildland-urban interface (W-UI) fires are a significant concern for federal, state, and local land management and fire agencies. Research using modeling, experiments, and W-UI case studies indicates that home ignitability during wildland fires depends on the characteristics of the home and its immediate surroundings. These findings have implications for hazard...

  6. knock characteristics analysis of a supercharged spark ignition

    African Journals Online (AJOL)

    user

    KNOCK CHARACTERISTICS ANALYSIS OF SUPERCHARGED SPARK IGNITION ENGINE USING THREE GRADES OF FUELS,. D. C. Uguru-Okorie .... pressure with the engine crank angle. The data acquisition system was controlled by a LabView script written which acquired pressure data at a sampling rate of 200 kHz.

  7. Stabilization of Highway Expansive Soils with High Loss on Ignition ...

    African Journals Online (AJOL)

    This study was carried out to evaluate the effect of high loss on ignition content cement kiln dust on the stabilization of highway expansive soils. Laboratory tests were performed on the natural and stabilized soil samples in accordance with BS 1377 (1990) and BS 1924 (1990), respectively. The preliminary investigation ...

  8. Studies on laser–plasma interaction physics for shock ignition

    Czech Academy of Sciences Publication Activity Database

    Maheut, Y.; Batani, D.; Nicolai, Ph.; Antonelli, L.; Krouský, Eduard

    2015-01-01

    Roč. 170, č. 4 (2015), s. 325-336 ISSN 1042-0150 EU Projects: European Commission(XE) 284464 - LASERLAB-EUROPE Institutional support: RVO:68378271 Keywords : shock ignition * plasma * hot electrons * shocks * fusion Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 0.472, year: 2015

  9. Controlling the ignition and flammability of magnesium for aerospace applications

    International Nuclear Information System (INIS)

    Czerwinski, Frank

    2014-01-01

    The perceived easy ignition and flammability of magnesium alloys create a detrimental safety feature that overshadows their high strength-to-weight ratio and hinders the aerospace application opportunities. To overcome the existing barriers a progress in understanding and controlling the reactivity of magnesium at high temperatures is required. This report describes fundamentals of magnesium ignition and flammability along with laboratory testing procedures and correlations with full scale fire scenarios, related in particular to the aircraft cabin. The influence of alloying elements on high temperature reactivity of magnesium and global efforts to develop ignition resistant and non-flammable magnesium alloys are reviewed. Although ignition and flammability represent quite different quantities, both are controlled by an oxidation resistance of the alloy and its capability to form a dense and protective surface oxide after exposures to an open flame or other heat source. Since surface oxide, composed of pure MgO, does not offer a sufficient protection, the research strategy is focused on modification of its chemistry and microstructure by micro-alloying the substrate with rare earths and other elements having high affinity to oxygen

  10. Ignition threshold of aluminized HMX-based PBXs

    Science.gov (United States)

    Miller, Christopher; Zhou, Min

    2017-06-01

    We report the results of micromechanical simulations of the ignition of aluminized HMX-based PBX under loading due to impact by thin flyers. The conditions analyzed concern loading pulses on the order of 20 nanoseconds to 0.8 microseconds in duration and impact piston velocities on the order of 300-1000 ms-1. The samples consist of a stochastically similar bimodal distribution of HMX grains, an Estane binder, and 50 μm aluminum particles. The computational model accounts for constituent elasto-vicoplasticity, viscoelasticity, bulk compressibility, fracture, interfacial debonding, fracture, internal contact, bulk and frictional heating, and heat conduction. The analysis focuses on the development of hotspots under different material settings and loading conditions. In particular, the ignition threshold in the form of the James relation and the corresponding ignition probability are calculated for the PBXs containing 0%, 6%, 10%, and 18% aluminum by volume. It is found that the addition of aluminum increases the ignition threshold, causing the materials to be less sensitive. Dissipation and heating mechanism changes responsible for this trend are delineated. Support by DOE NNSA SSGF is gratefully acknowledged.

  11. Utilization of Alcohol Fuel in Spark Ignition and Diesel Engines.

    Science.gov (United States)

    Berndt, Don; Stengel, Ron

    These five units comprise a course intended to prepare and train students to conduct alcohol fuel utilization seminars in spark ignition and diesel engines. Introductory materials include objectives and a list of instructor requirements. The first four units cover these topics: ethanol as an alternative fuel (technical and economic advantages,…

  12. Modeling spatio-temporal wildfire ignition point patterns

    Science.gov (United States)

    Amanda S. Hering; Cynthia L. Bell; Marc G. Genton

    2009-01-01

    We analyze and model the structure of spatio-temporal wildfire ignitions in the St. Johns River Water Management District in northeastern Florida. Previous studies, based on the K-function and an assumption of homogeneity, have shown that wildfire events occur in clusters. We revisit this analysis based on an inhomogeneous K-...

  13. Knock Prediction Using a Simple Model for Ignition Delay

    KAUST Repository

    Kalghatgi, Gautam

    2016-04-05

    An earlier paper has shown the ability to predict the phasing of knock onset in a gasoline PFI engine using a simple ignition delay equation for an appropriate surrogate fuel made up of toluene and PRF (TPRF). The applicability of this approach is confirmed in this paper in a different engine using five different fuels of differing RON, sensitivity, and composition - including ethanol blends. An Arrhenius type equation with a pressure correction for ignition delay can be found from interpolation of previously published data for any gasoline if its RON and sensitivity are known. Then, if the pressure and temperature in the unburned gas can be estimated or measured, the Livengood-Wu integral can be estimated as a function of crank angle to predict the occurrence of knock. Experiments in a single cylinder DISI engine over a wide operating range confirm that this simple approach can predict knock very accurately. The data presented should enable engineers to study knock or other auto-ignition phenomena e.g. in premixed compression ignition (PCI) engines without explicit chemical kinetic calculations. © Copyright 2016 SAE International.

  14. Cone-guided fast ignition with no imposed magnetic fields

    Directory of Open Access Journals (Sweden)

    Strozzi D.

    2013-11-01

    Full Text Available Simulations are presented of ignition-scale fast ignition targets with the integrated Zuma-Hydra PIC-hydrodynamic capability. We consider a spherical DT fuel assembly with a carbon cone, and an artificially-collimated fast electron source. We study the role of E and B fields and the fast electron energy spectrum. For mono-energetic 1.5 MeV fast electrons, without E and B fields, ignition can be achieved with fast electron energy Efig = 30kJ. This is 3.5× the minimal deposited ignition energy of 8.7 kJ for our fuel density of 450 g/cm3. Including E and B fields with the resistive Ohm's law E = ηJb gives Efig = 20kJ, while using the full Ohm's law gives Efig > 40 kJ. This is due to magnetic self-guiding in the former case, and ∇n ×∇T magnetic fields in the latter. Using a realistic, quasi two-temperature energy spectrum derived from PIC laser-plasma simulations increases Efig to (102, 81, 162 kJ for (no E/B, E = ηJb, full Ohm's law. Such electrons are too energetic to stop in the optimal hot spot depth.

  15. Coating Hydrostatic Bearings To Resist Ignition In Oxygen

    Science.gov (United States)

    Funkhouser, Merle E.

    1993-01-01

    Coats of superalloy MA754 plasma-sprayed onto occasionally rubbing surfaces of hydrostatic journal bearings operating in liquid and/or gaseous oxygen, according to proposal. Prevents ignition and combustion occurring when components made of stainless steels or other conventional bearing alloys rub against each other in oxygen. Eliminates need for runner and enhances control over critical bearing clearance.

  16. Automobile Engine: Basic Ignition Timing. Fordson Bilingual Demonstration Project.

    Science.gov (United States)

    Vick, James E.

    These two vocational instructional modules on basic automobile ignition timing and on engine operation, four-stroke cycle, are two of eight such modules designed to assist recently arrived Arab students, limited in English proficiency (LEP), in critical instructional areas in a comprehensive high school. Goal stated for this module is for the…

  17. Experiments with Liquid Propellant Jet Ignition in a Ballistic Compressor

    National Research Council Canada - National Science Library

    Birk, Avi

    1998-01-01

    .... The apparatus consists of an inline ballistic compressor and LP injector. The rebound of the ballistic compressor piston was arrested, trapping 40 to 55 MPa of 750 to 8500 C argon for ignition of circular jets in a windowed test chamber...

  18. First wall thermomechanical stress analysis in a fusion ignition experiment

    International Nuclear Information System (INIS)

    Rodin, G.; Carrera, R.; Howell, J.; Hwang, Y.L.; Montalvo, E.; Ordonez, C.; Dong, J.Q.

    1990-01-01

    The fusion ignition experiment IGNITEX + has been proposed as a low cost means of producing and controlling fusion ignited plasmas for scientific study. A single-turn-coil tokamak plasmas for scientific study. A single-turn-coil tokamak cryogenically precooled at liquid nitrogen temperature is used to produce 20 T fields and 12 MA plasma currents so that high-density ohmic ignition is possible. The high-field, high-density operation should maintain the plasma relatively free of wall impurities. In order to minimize plasma cooling, a low-Z first wall is considered for IGNITEX. The IGNITEX design philosophy emphasizes simplicity and low cost. A limiterless, smooth first will without files and plates is proposed. A low-Z material is applied by plasma jet techniques over a resistive vacuum vessel. This design is thought to be adequate for a magnetic fusion ignition experiment. Maintenance and operation of the first wall system is significantly simplified when compared to conventional designs

  19. National Ignition Facility system design requirements conventional facilities SDR001

    International Nuclear Information System (INIS)

    Hands, J.

    1996-01-01

    This System Design Requirements (SDR) document specifies the functions to be performed and the minimum design requirements for the National Ignition Facility (NIF) site infrastructure and conventional facilities. These consist of the physical site and buildings necessary to house the laser, target chamber, target preparation areas, optics support and ancillary functions

  20. Ignition of Nanocomposite Thermites by Electric Spark and Shock Wave

    Science.gov (United States)

    2014-04-30

    in hexane, was deposited onto a glass slide and the hexane was allowed to evaporate . The thermite was then tapped off the slide onto the cement layer... thermic Reaction and Ignition of Al/CuOx-Based Energetic Ma- terials, J. Mater. Sci. 2012, 47, 1296. [8] Y. Wang, X. Song, W. Jiang, G. Deng, X. Guo, H. Liu

  1. High Energy, Lead-Free Ignition Formulation for Thermate

    National Research Council Canada - National Science Library

    Tracy, Gene

    2002-01-01

    ... in the AN-Ml4 thermate grenade. This lead-free formulation has provided reliable ignition of the XM89 over a temperature range of -25 degrees F - 120 degrees F when using the M201 Al fuze as the initiator...

  2. Ignition delay time measurements of primary reference fuel blends

    KAUST Repository

    Alabbad, Mohammed

    2017-02-07

    Ignition delay times of four different primary reference fuels (PRF), mixtures of n-heptane and iso-octane, were measured behind reflected shock waves in a high-pressure shock tube facility. The PRFs were formulated to match the RON of two high-octane gasolines (RON 95 and 91) and two prospective low-octane naphtha fuels (RON 80 and 70). Experiments were carried out over a wide range of temperatures (700–1200K), pressures (10, 20, and 40bar) and equivalence ratios (0.5 and 1). Kinetic modeling predictions from four chemical kinetic mechanisms are compared with the experimental data. Ignition delay correlations are developed to reproduce the measured ignition delay times. Brute force sensitivity analyses are carried out to identify reactions that affect ignition delay times at specific temperature, pressure and equivalence ratio. The large experimental data set provided in the current work will serve as a benchmark for the validation of chemical kinetic mechanisms of primary reference fuel blends.

  3. Ignition and burn control characteristics of thermonuclear plasmas

    International Nuclear Information System (INIS)

    Chaniotakis, E.A.

    1990-01-01

    Achieving the long sought goal of fusion energy requires the attainment of an ignited and controlled thermonuclear plasma. Obtaining an ignited plasma in a tokamak device requires consideration of both the physics of the plasma and the engineering of the machine. With the aide of completely analytical procedure optimized and ignited tokamaks are obtained under various physics assumptions. These designs show the possible advantage of tokamaks characterized by high (∼4.5) aspect ratio, and high (∼15 T) toroidal magnetic field. The control of an ignited plasma is investigated by using auxiliary power modulation. With auxiliary power stable operating points can be created with Q ∼50. Recognizing the need for a fast 1 1/2-D transport model for studying profile effects the plasma transport equations are solved using variational methods. A computer model based on the variational method has been developed. This model solves the 1 1/2-D transport equation very fast with little loss of accuracy. 74 refs., 70 figs., 8 tabs

  4. Progress towards a lightning ignition model for the Northern Rockies

    Science.gov (United States)

    Paul Sopko; Don Latham

    2010-01-01

    We are in the process of constructing a lightning ignition model specific to the Northern Rockies using fire occurrence, lightning strike, ecoregion, and historical weather, NFDRS (National Fire Danger Rating System), lightning efficiency and lightning "possibility" data. Daily grids for each of these categories were reconstructed for the 2003 fire season (...

  5. Thermal ignition in a reactive variable viscosity Poiseuille flow ...

    African Journals Online (AJOL)

    In this paper, we investigate the thermal ignition in a strongly exothermic reaction of a variable viscosity combustible material flowing through a channel with isothermal walls under Arrhenius kinetics, neglecting the consumption of the material. Analytical solutions are constructed for the governing nonlinear boundary-value ...

  6. Transverse liquid fuel jet breakup, burning, and ignition

    Energy Technology Data Exchange (ETDEWEB)

    Li, H.

    1990-01-01

    An analytical/numerical study of the breakup, burning, and ignition of liquid fuels injected transversely into a hot air stream is conducted. The non-reacting liquid jet breakup location is determined by the local sonic point criterion first proposed by Schetz, et al. (1980). Two models, one employing analysis of an elliptical jet cross-section and the other employing a two-dimensional blunt body to represent the transverse jet, have been used for sonic point calculations. An auxiliary criterion based on surface tension stability is used as a separate means of determining the breakup location. For the reacting liquid jet problem, a diffusion flame supported by a one-step chemical reaction within the gaseous boundary layer is solved along the ellipse surface in subsonic crossflow. Typical flame structures and concentration profiles have been calculated for various locations along the jet cross-section as a function of upstream Mach numbers. The integrated reaction rate along the jet cross-section is used to predict ignition position, which is found to be situated near the stagnation point. While a multi-step reaction is needed to represent the ignition process more accurately, the present calculation does yield reasonable predictions concerning ignition along a curved surface.

  7. Ohmic ignition with high engineering beta based on the RFP

    Science.gov (United States)

    Sarff, J. S.; Anderson, J. K.; Chapman, B. E.; McCollam, K. J.

    2017-10-01

    The RFP configuration allows the possibility of ohmic ignition for fusion energy, eliminating the need for auxiliary heating by rf or neutral beam injection. Complex plasma-facing antennas and NBI sources are therefore not required, simplifying the difficult fusion materials challenge. While all toroidal configurations require a volume-average 〈 B 〉 >= 5 T, the field strength at the magnet in the RFP is only Bcoil 3T since plasma current generates almost all of the field. Engineering beta is therefore maximized. We summarize access to ohmic ignition by examining a Lawson-like power balance for an RFP fusion plasma comparable to the ARIES-AT advanced tokamak, which generates neutron wall loading Pn / A 5 MW/m2. The required energy confinement for ohmic ignition in an RFP is similar to that for a tokamak. Confinement in MST is comparable to a same-size, same-field tokamak plasma, but 〈 B 〉 in MST is only 1/20th that required for fusion. While transport could ultimately be dominated by micro turbulence, extrapolation of stochastic transport using Lundquist number scaling for MHD tearing indicates standard RFP confinement (not enhanced by current profile control) could be sufficient to access ohmic ignition. This bolsters the possibility for steady-state inductive sustainment using oscillating field current drive. The high beta and classical energetic ion confinement measured in MST also bolster the RFP's fusion potential. Work supported by U.S. DoE.

  8. Firebrands and spotting ignition in large-scale fires

    Science.gov (United States)

    Eunmo Koo; Patrick J. Pagni; David R. Weise; John P. Woycheese

    2010-01-01

    Spotting ignition by lofted firebrands is a significant mechanism of fire spread, as observed in many largescale fires. The role of firebrands in fire propagation and the important parameters involved in spot fire development are studied. Historical large-scale fires, including wind-driven urban and wildland conflagrations and post-earthquake fires are given as...

  9. Determining Fire Dates and Locating Ignition Points With Satellite Data

    Directory of Open Access Journals (Sweden)

    Akli Benali

    2016-04-01

    Full Text Available Each wildfire has its own “history”, burns under specific conditions and leads to unique environmental impacts. Information on where and when it has started and its duration is important to improve understanding on the dynamics of individual wildfires. This information is typically included in fire databases that are known to have: (i multiple error sources; (ii limited spatial coverage and/or time span, and; (iii often unknown accuracy and uncertainty. Satellite data have a large potential to reduce such limitations. We used active fire data from the MODerate Resolution Imaging Spectroradiometer (MODIS to estimate fire start/end dates and ignition location(s for large wildfires that occurred in Alaska, Portugal, Greece, California and southeastern Australia. We assessed the agreement between satellite-derived estimates and data from fire databases, and determined the associated uncertainty. Fire dates and ignition location(s were estimated for circa 76% of the total burnt area extent for the five study regions. The ability to estimate fire dates and ignitions from satellite data increased with fire size. The agreement between reported and estimated fire dates was very good for start dates (Model efficiency index, MEF = 0.91 and reasonable for end dates (MEF = 0.73. The spatio-temporal agreement between reported and satellite-derived wildfire ignitions showed temporal lags and distances within 12 h and 2 km, respectively. Uncertainties associated with ignition estimates were generally larger than the disagreements with data reported in fire databases. Our results show how satellite data can contribute to improve information regarding dates and ignitions of large wildfires. This contribution can be particularly relevant in regions with scarce fire information, while in well-documented areas it can be used to complement, potentially detect, and correct inconsistencies in existing fire databases. Using data from other existing and/or upcoming

  10. The Relationship between Critical Thinking and Empathic Tendency: The Example of Preservice Physical Education Teachers

    OpenAIRE

    Ezel Nur KORUR; Erman ÖNCÜ; Sonnur KÜÇÜK KILIÇ

    2016-01-01

    The purpose of this study was to examine preservice physical education teachers’ critical thinking skills and empathic tendencies according to some demographic variables, and to determine the relationship between their critical thinking skills and empathic tendencies. The study was conducted on 1006 preservice physical education teachers who were selected from ten universities. In the study, the California Critical Thinking Disposition Inventory and the Empathy Tendency Criteria were admin...

  11. Ignition conditions and characteristics for distillant fuel under to local conductive heating

    Directory of Open Access Journals (Sweden)

    Zakharevich Arkadiy

    2017-01-01

    Full Text Available Describes the methodology and results of experimental studies of ignition of diesel fuel and a cloth impregnated with this fuel by a hot steel particle are outlined. The layer thickness of liquid fuel was changed from 1 mm to 11 mm. It was established dependence of numerical values of the ignition time delay from the thickness layer of diesel fuel. The revealed ignition mode and the limiting layer thickness for diesel fuel when the ignition is missing. As experimental study of the ignition conditions and characteristics for fabric impregnated with diesel fuel under local conductive heating is reported.

  12. Systematics of spontaneous positron lines

    International Nuclear Information System (INIS)

    Mueller, U.; Reus, T. de; Reinhardt, J.; Mueller, B.; Greiner, W.

    1985-08-01

    Dynamical and spontaneous positron emission are investigated for heavy-ion collisions with long time delay using a semiclassical description. Numerical results and analytical expressions for the characteristic quantities of the resulting spontaneous positron line, i.e., its position, width, and cross section, are compared. The expected behaviour of the line position and cross section and its visibility against the spectrum of dynamically created positrons is discussed in dependence of the united charge Zsub(u) of projectile and target nucleus in a range of systems from Zsub(u)=180 up to Zsub(u)=188. The results are confronted with presently available experimental data, and possible implications on further experiments are worked out. (orig.)

  13. Spontaneous Rotational Inversion in Phycomyces

    KAUST Repository

    Goriely, Alain

    2011-03-01

    The filamentary fungus Phycomyces blakesleeanus undergoes a series of remarkable transitions during aerial growth. During what is known as the stagea IV growth phase, the fungus extends while rotating in a counterclockwise manner when viewed from above (stagea IVa) and then, while continuing to grow, spontaneously reverses to a clockwise rotation (stagea IVb). This phase lasts for 24-48Ah and is sometimes followed by yet another reversal (stageAIVc) before the overall growth ends. Here, we propose a continuum mechanical model of this entire process using nonlinear, anisotropic, elasticity and show how helical anisotropy associated with the cell wall structure can induce spontaneous rotation and, under appropriate circumstances, the observed reversal of rotational handedness. © 2011 American Physical Society.

  14. Spontaneous regression of colon cancer.

    Science.gov (United States)

    Kihara, Kyoichi; Fujita, Shin; Ohshiro, Taihei; Yamamoto, Seiichiro; Sekine, Shigeki

    2015-01-01

    A case of spontaneous regression of transverse colon cancer is reported. A 64-year-old man was diagnosed as having cancer of the transverse colon at a local hospital. Initial and second colonoscopy examinations revealed a typical cancer of the transverse colon, which was diagnosed as moderately differentiated adenocarcinoma. The patient underwent right hemicolectomy 6 weeks after the initial colonoscopy. The resected specimen showed only a scar at the tumor site, and no cancerous tissue was proven histologically. The patient is alive with no evidence of recurrence 1 year after surgery. Although an antitumor immune response is the most likely explanation, the exact nature of the phenomenon was unclear. We describe this rare case and review the literature pertaining to spontaneous regression of colorectal cancer. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  15. Management of intractable spontaneous epistaxis

    Science.gov (United States)

    Rudmik, Luke

    2012-01-01

    Background: Epistaxis is a common otolaryngology emergency and is often controlled with first-line interventions such as cautery, hemostatic agents, or anterior nasal packing. A subset of patients will continue to bleed and require more aggressive therapy. Methods: Intractable spontaneous epistaxis was traditionally managed with posterior nasal packing and prolonged hospital admission. In an effort to reduce patient morbidity and shorten hospital stay, surgical and endovascular techniques have gained popularity. A literature review was conducted. Results: Transnasal endoscopic sphenopalatine artery ligation and arterial embolization provide excellent control rates but the decision to choose one over the other can be challenging. The role of transnasal endoscopic anterior ethmoid artery ligation is unclear but may be considered in certain cases when bleeding localizes to the ethmoid region. Conclusion: This article will focus on the management of intractable spontaneous epistaxis and discuss the role of endoscopic arterial ligation and embolization as it pertains to this challenging clinical scenario. PMID:22391084

  16. Modern status and tendencies of the development of radionuclide diagnostics

    International Nuclear Information System (INIS)

    Abdurahmanov, J.A.

    2004-01-01

    Full text: Modern development of nuclear medicine is characterized by working out of unique new pharmaceuticals first of all, which allow to estimate a condition of different organs and tissues of the organism at cellular level. The most long-term is a creation of different peptide preparations and marking of different receptors, which allow to carry out researches of pathogenic diseases. Such preparations begin to take root not only for positron tomography, but also emissive tomography. One more very interesting direction is so-called directed transport of drugs, using specialized substances for delivery therapeutic and diagnostic dose immediate to necessary place. To use these radiopharmpreparations requires an equipment with according technique, in the first place with emissive and, especially, positron tomographs. In this plan, positron tomography is actively developing in the world, where exist about 30 denominations, already commercial, preparations for the researches in these fields as cardiology, oncology, and neurology. There are new emissive tomographs with two or three detectors under working out, which allow to carry out emissive tomography in a minimum time and with high solution. A weak point in the radio nuclear diagnostics is relatively not high spatial solution of apparatus. In the first place it concerns emissive tomographs and to least degree positron tomographs. Therefore the new tendency in the development of methods of diagnostics and apparatus is appearance of combined methods and apparatus, which connects emissive tomography with X-ray and NMR- tomography. Earliest apparatus of this class was working out for researching of animals and represented small combined with X-ray and NMR- tomograph. To day in the world appeared first such apparatus for patients - emissive tomograph combined with X-ray. These are works of the firms of CTI and Siemens. A first apparatus is in the Pittsburgh and gives good results. And second working out - is the

  17. Fast ignition experimental and theoretical researches toward Fast Ignition Realization Experiment (FIREX)

    International Nuclear Information System (INIS)

    Mima, K.

    2002-01-01

    In 2000, the output energy of the peta watt module added to Gekko XII reached a level of 100 J in one pico-second. CD plastic shell pellets with or without cone guide are imploded by a few kJ/1 ns green beams of the Gekko XII laser, which are heated by the PWM laser. By the experiments, we found that D-D neutron yields are enhanced by one order of magnitude for both spherical implosion and cone guide implosion. In those experiments, it is found that the heating laser energy was not transferred into the core plasmas effectively in the case of without cone because of strong dumping of the intense laser pulse in coronal plasmas. Therefore, we concluded that the more efficient core heating occurs in the cone guide target and it will be better as an ignition target. In the peta watto laser experiments which is going in this Aprile, we will inject 500 J/1 ps pulse into cone targets to heat compressed CD plasmas with a density of 50-100 g/cc. In this experiment, it is expected that the plasma is heated to higher than 1 keV. The detail of the experiment will be reported in the conference. (author)

  18. Spontaneous baryogenesis in warm inflation

    OpenAIRE

    Brandenberger, Robert H.; Yamaguchi, Masahide

    2003-01-01

    We discuss spontaneous baryogenesis in the warm inflation scenario. In contrast with standard inflation models, radiation always exists in the warm inflation scenario, and the inflaton must be directly coupled to it. Also, the transition to the post-inflationary radiation dominated phase is smooth and the entropy is not significantly increased at the end of the period of inflation. In addition, after the period of warm inflation ends, the inflaton does not oscillate coherently but slowly roll...

  19. Development of laser-induced fluorescence for precombustion diagnostics in spark-ignition engines

    Energy Technology Data Exchange (ETDEWEB)

    Neij, H.

    1998-11-01

    ) - was investigated with respect to optical properties relevant to laser-based combustion diagnostics, by flame emission, optical absorption, laser-induced fluorescence, spontaneous Raman scattering, and rotational CARS. The potential for LIF detection of water vapor in combustion processes was evaluated. Water molecules were excited in a two-photon process at 248 nm yielding fluorescence around 400-500 nm. Spectrally interfering species at flame conditions were identified as hot O{sub 2}, and laser-generated C{sub 2} and N{sub 2}{sup +}. The detection limit for two-dimensional single-shot detection of water vapor at atmospheric conditions was estimated to 0.2%. Extrapolations to flame conditions were presented. A pressure-dependent process was identified, which decreased the signal intensity, broadened the linewidths, and degraded the spectral-excitation feature as the ambient pressure was increased. Two-photon water vapor LIF was applied to a research engine for residual gas visualization. The accuracy and precision of both two-dimensional and spatially averaged data were discussed. The LIF data was used to explain the engine behavior on a cycle-by-cycle basis. A significant correlation was identified between the combustion event and the spatially averaged water signal around the spark gap at the time of ignition 181 refs, 26 figs, 7 tabs

  20. Spontaneous Splenic Rupture in Melanoma

    Directory of Open Access Journals (Sweden)

    Hadi Mirfazaelian

    2014-01-01

    Full Text Available Spontaneous rupture of spleen due to malignant melanoma is a rare situation, with only a few case reports in the literature. This study reports a previously healthy, 30-year-old man who came with chief complaint of acute abdominal pain to emergency room. On physical examination, abdominal tenderness and guarding were detected to be coincident with hypotension. Ultrasonography revealed mild splenomegaly with moderate free fluid in abdominopelvic cavity. Considering acute abdominal pain and hemodynamic instability, he underwent splenectomy with splenic rupture as the source of bleeding. Histologic examination showed diffuse infiltration by tumor. Immunohistochemical study (positive for S100, HMB45, and vimentin and negative for CK, CD10, CK20, CK7, CD30, LCA, EMA, and chromogranin confirmed metastatic malignant melanoma. On further questioning, there was a past history of a nasal dark skin lesion which was removed two years ago with no pathologic examination. Spontaneous (nontraumatic rupture of spleen is an uncommon situation and it happens very rarely due to neoplastic metastasis. Metastasis of malignant melanoma is one of the rare causes of the spontaneous rupture of spleen.

  1. Hierarchical cluster analysis of ignitable liquids based on the total ion spectrum.

    Science.gov (United States)

    Waddell, Erin E; Frisch-Daiello, Jessica L; Williams, Mary R; Sigman, Michael E

    2014-09-01

    Gas chromatography-mass spectrometry (GC-MS) data of ignitable liquids in the Ignitable Liquids Reference Collection (ILRC) database were processed to obtain 445 total ion spectra (TIS), that is, average mass spectra across the chromatographic profile. Hierarchical cluster analysis, an unsupervised learning technique, was applied to find features useful for classification of ignitable liquids. A combination of the correlation distance and average linkage was utilized for grouping ignitable liquids with similar chemical composition. This study evaluated whether hierarchical cluster analysis of the TIS would cluster together ignitable liquids of the same ASTM class assignment, as designated in the ILRC database. The ignitable liquids clustered based on their chemical composition, and the ignitable liquids within each cluster were predominantly from one ASTM E1618-11 class. These results reinforce use of the TIS as a tool to aid in forensic fire debris analysis. © 2014 American Academy of Forensic Sciences.

  2. Ignition improvement by injector arrangement in a multi-fuel combustor for micro gas turbine

    Science.gov (United States)

    Antoshkiv, O.; Poojitganont, T.; Jeansirisomboon, S.; Berg, H. P.

    2018-01-01

    The novel combustor design also has an impact on the ignitor arrangement. The conventional ignitor system cannot guarantee optimal ignition performance in the usual radial position. The difficult ignitability of gaseous fuels was the main challenge for the ignitor system improvement. One way to improve the ignition performance significantly is a torch ignitor system in which the gaseous fuel is directly mixed with a large amount of the combustor air. To reach this goal, the ignition process was investigated in detail. The micro gas turbine (MGT) ignition was optimised considering three main procedures: torch ignitor operation, burner ignition and flame propagation between the neighbour injectors. A successful final result of the chain of ignition procedures depends on multiple aspects of the combustor design. Performed development work shows an important step towards designing modern high-efficiency low-emission combustors.

  3. Progress towards polar-drive ignition for the NIF

    International Nuclear Information System (INIS)

    McCrory, R.L.; Betti, R.; Boehly, T.R.; Collins, T.J.B.; Craxton, R.S.; Delettrez, J.A.; Edgell, D.H.; Epstein, R.; Froula, D.H.; Glebov, V.Yu.; Goncharov, V.N.; Harding, D.R.; Hohenberger, M.; Hu, S.X.; Igumenshchev, I.V.; Kessler, T.J.; Knauer, J.P.; Casey, D.T.; Frenje, J.A.; Gatu-Johnson, M.

    2013-01-01

    The University of Rochester's Laboratory for Laser Energetics (LLE) performs direct-drive inertial confinement fusion (ICF) research. LLE's Omega Laser Facility is used to study direct-drive ICF ignition concepts, developing an understanding of the underlying physics that feeds into the design of ignition targets for the National Ignition Facility (NIF). The baseline symmetric-illumination, direct-drive–ignition target design consists of a 1.5 MJ multiple-picket laser pulse that generates four shock waves (similar to the NIF baseline indirect-drive design) and is predicted to produce a one-dimensional (1D) gain of 48. LLE has developed the polar-drive (PD) illumination concept (for NIF beams in the x-ray–drive configuration) to allow the pursuit of direct-drive ignition without significant reconfiguration of the beam paths on the NIF. Some less-invasive changes in the NIF infrastructure will be required, including new phase plates, polarization rotators, and a PD-specific beam-smoothing front end. A suite of PD ignition designs with implosion velocities from 3.5 to 4.3 × 10 7 cm s −1 are predicted to have significant 2D gains (Collins et al 2012 Bull. Am. Phys. Soc. 57 155). Verification of the physics basis of these simulations is a major thrust of direct-drive implosion experiments on both OMEGA and the NIF. Many physics issues are being examined with symmetric beam irradiation on OMEGA, varying the implosion parameters over a wide region of design space. Cryogenic deuterium–tritium target experiments with symmetric irradiation have produced areal densities of ∼0.3 g cm −2 , ion temperatures over 3 keV, and neutron yields in excess of 20% of the ‘clean’ 1D predicted value. The inferred Lawson criterion figure of merit (Betti R. et al 2010 Phys. Plasmas 17 058102) has increased from 1.7 atm s (IAEA 2010) to 2.6 atm s. (paper)

  4. Effect of Temperature, Pressure and Equivalence Ratio on Ignition Delay in Ignition Quality Tester (IQT): Diesel,n-Heptane, andiso-Octane Fuels under Low Temperature Conditions

    KAUST Repository

    Yang, Seung Yeon

    2015-11-02

    Effects of temperature, pressure and global equivalence ratio on total ignition delay time in a constant volume spray combustion chamber were investigated for diesel fuel along with the primary reference fuels (PRFs) of n-heptane and iso-octane in relatively low temperature conditions to simulate unsteady spray ignition behavior. A KAUST Research ignition quality tester (KR-IQT) was utilized, which has a feature of varying temperature, pressure and equivalence ratio using a variable displacement fuel pump. A gradient method was adopted in determining the start of ignition in order to compensate pressure increase induced by low temperature heat release. Comparison of this method with other existing methods was discussed. Ignition delay times were measured at various equivalence ratios (0.5-1.7) with the temperatures of initial charge air in the range from 698 to 860 K and the pressures in the range of 1.5 to 2.1 MPa, pertinent to low temperature combustion (LTC) conditions. An attempt to scale the effect of pressure on total ignition delay was undertaken and the equivalence ratio exponent and activation energy in the Arrhenius expression of total ignition delay were determined. Ignition delay results indicated that there were strong correlations of pressure, temperature, and equivalence ratio under most conditions studied except at relatively low pressures. Diesel (DCN 52.5) and n-heptane (DCN 54) fuels exhibited reasonably similar ignition delay characteristics, while iso-octane showed a distinct behavior under low temperature regime having a two-stage ignition, which substantiate the adoption of the gradient method in determining ignition delay.

  5. Tendencies in the Regional Industry and Specialisation in Romania during the Transition Period

    Directory of Open Access Journals (Sweden)

    Monica Nedelcu

    2008-03-01

    Full Text Available This article intends to present tendencies in the regional industry and specialisation in Romania during the transition period. The authors present the main tendencies in the analysis of concentration and specialisation and industry developments by electoral cycles as well. An econometric model for the analysis in time of concentration and specialisation in Romania during the transition period is also presented.

  6. Age differences in women's tendency to gossip are mediated by their mate value

    NARCIS (Netherlands)

    Massar, K.; Buunk, Abraham (Bram); Rempt, S.

    In the current study it was investigated whether age differences in women's tendency to gossip exist, and whether these could be accounted for by self-reported mate value. It was expected that younger women would report a higher tendency to gossip after reading a scenario in which a romantic rival

  7. The Relationships among Imagination, Future Imagination Tendency, and Future Time Perspective of Junior High School Students

    Science.gov (United States)

    Tsai, Min-Ying

    2015-01-01

    The main purpose of the study were to investigate the relationships among imagination, future imagination tendency, and future time perspective of junior high school students, then to explore the future time perspective which is predicted by background variables, imaginative qualities, and future imagination tendency. The subjects were 331 from…

  8. High anxiety levels are associated with divergent empathising and systemising tendencies

    Directory of Open Access Journals (Sweden)

    Paul A. Strutt

    2014-12-01

    Full Text Available “Systemising” and “Empathising” are two cognitive tendencies that individuals rely on to make sense of the world. Systemising involves the observation of environmental contingencies and the consequent formulation of concrete rules to predict events. Empathising is the drive to attribute affective states to others, and to guide responses based on these inferences. High Anxiety is linked to negative, and erroneous, interpretations of social information, and it is possible that the introduction of systems, and therefore predictive utility, might appeal to anxious individuals. It was hypothesised that individuals with high trait anxiety levels would report higher systemising tendencies and lower empathising tendencies than their less anxious peers. A total of 223 participants completed measures of trait anxiety, empathising and systemising tendencies, and autistic traits. Consistent with the hypotheses, individuals with higher levels of trait anxiety demonstrated high systemising tendencies and relatively low empathising tendencies, whilst their less anxious peers demonstrated balanced tendencies in both domains. The High Anxiety group also scored highest on the self-reported measure of autistic traits. This research has identified anxiety as a potential facilitator of divergence in cognitive tendencies, which will be further enhanced by studies in clinical populations.

  9. Response Reversal and Children with Psychopathic Tendencies: Success Is a Function of Salience of Contingency Change

    Science.gov (United States)

    Budhani, S.; Blair, R. J. R.

    2005-01-01

    Background: Previous work has inconsistently reported difficulties with response reversal/extinction in children with psychopathic tendencies. Method: We tested the hypothesis that the degree of impairment seen in children with psychopathic tendencies is a function of the salience of contingency change. We investigated the performance of children…

  10. Correctional Officers and Workplace Adversity: Identifying Interpersonal, Cognitive, and Behavioral Response Tendencies.

    Science.gov (United States)

    Trounson, Justin S; Pfeifer, Jeffrey E

    2017-10-01

    This study explored correctional officers' response tendencies (i.e., cognitive, interpersonal, and behavioral response patterns they engage in) when managing workplace adversity. In total, 53 Australian correctional officers participated in the study. Eight exploratory focus group discussions ( n = 42) were conducted to identify a set of officer-endorsed response tendencies. Thematic analysis of group data revealed that correctional officers engage in a range of response tendencies when facing workplace adversity and that these tendencies may be categorized as interpersonally, cognitively, or behaviorally based. Semistructured interviews ( n = 11) were then conducted to provide further depth of information regarding officer response tendency usage. Results are discussed in terms of common themes, future research, and implications for developing training programs designed to ameliorate the effects of workplace adversity.

  11. Implicit Alcohol Approach and Avoidance Tendencies Predict Future Drinking in Problem Drinkers.

    Science.gov (United States)

    Martin Braunstein, Laura; Kuerbis, Alexis; Ochsner, Kevin; Morgenstern, Jon

    2016-09-01

    Addiction is characterized by compulsive drug seeking and substance use, yet many individuals break free of these patterns and change their behavior. Traditional candidate predictors of behavior change/persistence rely on self-reports of factors such as readiness to change. However, explicit measures only characterize top-down influences on behavior. The incentive sensitization model of addition suggests that more implicit, automatic processes, such as the tendency to approach substance cues, play a major role in behavior. We examined implicit alcohol approach and avoidance tendencies using a reaction time (RT) task in a sample of problem drinkers with alcohol use disorder (AUD) seeking to reduce heavy drinking. We measured alcohol approach and avoidance tendencies at baseline and at outcome, 12 weeks later. We asked whether alcohol approach and avoidance tendencies (i) changed over time, (ii) related to current drinking, and (iii) predicted changes in drinking from baseline to outcome. Approach and avoidance tendencies did not significantly change over time, nor did they correlate with current drinking, but these tendencies at baseline did predict drinking weeks later. Faster alcohol approach was associated with greater overall drinking at outcome, and faster alcohol avoidance predicted fewer drinking days per week at outcome. Exploratory analyses examined the relationship between approach and avoidance and traditional explicit measures including appraisals of alcohol and motivation to change. Implicit approach tendencies were largely distinct from explicit measures, and approach and avoidance tendencies explained unique variance in outcome drinking. The current findings suggest that implicit alcohol approach and avoidance tendencies assessed via a simple reaction time task can predict relative changes in drinking weeks later. Given that many explicit measures typically used in treatment studies fail to predict who will change, approach and avoidance tendencies

  12. Equilibrium system analysis in a tokamak ignition experiment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Carrera, R.; Weldon, W.F.; Woodson, H.H.

    1989-10-01

    The objective of the IGNITEX Project is to produce and control ignited plasmas for scientific study in the simplest and least expensive way possible. The original concept was proposed by both physics and engineering researchers along the following line of thought. Question: Is there any theoretically simple, compact and reliable way of achieving fusion ignition according to the results of the fusion research program for the last decades? Answer: Yes. An experiment to be carried out in an ohmically heated compact tokamak device with 20 T field on plasma axis. Question: Is there any practical way to carry out that experiment at low cost in the near term? Answer: Yes. Using a single-turn coil magnet system with homopolar power supplies.

  13. Equilibrium system analysis in a tokamak ignition experiment

    Energy Technology Data Exchange (ETDEWEB)

    Carrera, R.; Weldon, W.F.; Woodson, H.H.

    1989-10-01

    The objective of the IGNITEX Project is to produce and control ignited plasmas for scientific study in the simplest and least expensive way possible. The original concept was proposed by both physics and engineering researchers along the following line of thought. Question: Is there any theoretically simple, compact and reliable way of achieving fusion ignition according to the results of the fusion research program for the last decades Answer: Yes. An experiment to be carried out in an ohmically heated compact tokamak device with 20 T field on plasma axis. Question: Is there any practical way to carry out that experiment at low cost in the near term Answer: Yes. Using a single-turn coil magnet system with homopolar power supplies.

  14. Recent advances in ignition target physics at CEA

    International Nuclear Information System (INIS)

    Tassart, J.

    2003-01-01

    The objective of the Ignition Physics Program at CEA is to burn DT capsules on the Laser Mega Joule (LMJ) at the beginning of the next decade. Recent progress on Laser Plasma Interaction, hohlraum energetics, symmetry, ablator physics and hydrodynamic instabilities allow to remove most of these latter, to precise laser and target specifications and to elaborate a strategy toward ignition. These studies include theoretical work, numerical simulations, diagnostics developments and experiments partly done in collaboration with the US DOE. Construction of facilities is ongoing: LMJ beam prototype is planed to fire 7 kJ at the center of the target chamber at 0.35 mm at the end of 2002 and the LMJ (a 240 beams 1.8 MJ laser) is planned to be ready for experiments at the end of 2009. (author)

  15. A prediction study of a spark ignition supercharged hydrogen engine

    International Nuclear Information System (INIS)

    Al-Baghdadi, Maher A.R. Sadiq.; Al-Janabi, Haroun A.K. Shahad

    2003-01-01

    Hydrogen is found to be a suitable alternative fuel for spark ignition engines with certain drawbacks, such as high NO x emission and small power output. However, supercharging may solve such problems. In this study, the effects of equivalence ratio, compression ratio and inlet pressure on the performance and NO x emission of a four stroke supercharged hydrogen engine have been analyzed using a specially developed computer program. The results are verified and compared with experimental data obtained from tests on a Ricardo E6/US engine. A chart specifying the safe operation zone of the hydrogen engine has been produced. The safe operation zone means no pre-ignition, acceptable NO x emission, high engine efficiency and lower specific fuel consumption in comparison with the gasoline engine. The study also shows that supercharging is a more effective method to increase the output of a hydrogen engine rather than increasing the compression ratio of the engine at the knock limited equivalence ratio

  16. Development and demonstration of flueric sounding rocket motor ignition

    Science.gov (United States)

    Marchese, V. P.

    1974-01-01

    An analytical and experimental program is described which established a flueric rocket motor ignition system concept incorporating a pneumatic match with a simple hand pump as the only energy source. An evaluation was made of this concept to determine the margins of the operating range and capabilities of every component of the system. This evaluation included a determination of power supply requirements, ignitor geometry and alinement, ignitor/propellant interfacing and materials and the effects of ambient temperatures and pressure. It was demonstrated that an operator using a simple hand pump for 30 seconds could ignite BKNO3 at a standoff distance of 100 m (330 ft) with the only connection to the ignitor being a piece of plastic pneumatic tubing.

  17. Application of Dimethyl Ether in Compression Ignition Engines

    DEFF Research Database (Denmark)

    Hansen, Kim Rene

    . The elastomer seals that provided the sealing instead of the metal-to-metal contact could do that because of the low injection pressure. The engine developed in this way was based on a 50cc Peugeot two-stroke engine. The fuel injector used was a Bosch HDEV originally developed for direct injection of gasoline......This study has its roots in two separate events at the Department of Mechanical Engineering at DTU. In 1995 the first attempt to operate a diesel engine on dimethyl ether (DME) was successfully concluded. In 2004 the department decided to compete in the vehicle fuel efficiency competition Shell Eco......-Marathon. The diesel engine test results from 1995 showed that DME is a superb diesel fuel. DME is easy to ignite by compression ignition and it has a molecular structure that results in near-zero emission of particulates when burned. These are features of a fuel that are highly desirable in a diesel engine...

  18. Inertial Confinement Fusion and the National Ignition Facility (NIF)

    Energy Technology Data Exchange (ETDEWEB)

    Ross, P.

    2012-08-29

    Inertial confinement fusion (ICF) seeks to provide sustainable fusion energy by compressing frozen deuterium and tritium fuel to extremely high densities. The advantages of fusion vs. fission are discussed, including total energy per reaction and energy per nucleon. The Lawson Criterion, defining the requirements for ignition, is derived and explained. Different confinement methods and their implications are discussed. The feasibility of creating a power plant using ICF is analyzed using realistic and feasible numbers. The National Ignition Facility (NIF) at Lawrence Livermore National Laboratory is shown as a significant step forward toward making a fusion power plant based on ICF. NIF is the world’s largest laser, delivering 1.8 MJ of energy, with a peak power greater than 500 TW. NIF is actively striving toward the goal of fusion energy. Other uses for NIF are discussed.

  19. Status of the National Ignition Facility and Campaign, and Controls and Information Systems on the Path to Ignition

    Energy Technology Data Exchange (ETDEWEB)

    Lagin, L.; Azevedo, S.; Bettenhausen, R.; Beeler, R.; Belk, L.; Bowers, G.; Brunton, G.; Carey, R.; Casey, A.; Christensen, M.; Demaret, R.; Edwards, O.; Estes, C.; Fisher, J.; Foxworthy, C.; Frazier, T.; Kegelmeyer, L.; Krammen, J.; Ludwigsen, A.; Mathisen, D.; Marshall, C.; Shelton, R.; Stout, E.; Townsend, S.; Van Arsdall, P.; Wilson, E. [Lawrence Livermore National Laboratory, Livermore (United States)

    2009-07-01

    Full text of the publication follows: The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility under construction that will contain a 192-beam, 1.8-Mega-joule, 500-Terawatt, ultraviolet laser system together with a 10- meter diameter target chamber with room for multiple experimental diagnostics. NIF is the world's largest and most energetic laser experimental system, providing a scientific center to study inertial confinement fusion (ICF) and matter at extreme energy densities and pressures. NIF's laser beams are designed to compress fusion targets to conditions required for thermonuclear burn, liberating more energy than required to initiate the fusion reactions. NIF is operated by the large-scale Integrated Computer Control System (ICCS) in an architecture partitioned by bundle and distributed among over 1000 front-end processors, embedded controllers and supervisory servers. NIF's automated control subsystems are built from a common object-oriented software framework based on CORBA distribution that deploys the software across the computer network and achieves inter-operation between different languages and target architectures. A shot automation framework has been used to orchestrate and automate over a thousand system shots performed at the NIF using the ICCS. An experimental database and automated shot analysis infrastructure has also been developed and is being used for conducting experiments. In March 2009, the NIF project was completed by successfully demonstrating its formal completion of performance and operational design criteria. At present, all 192 beams have been commissioned to target chamber center. During the past year, the control system was expanded to include automation of target area systems including final optics, target positioners and diagnostics, in preparation for project completion. A detailed set of experiments have begun and are being performed as part of a National

  20. Spontaneous oscillations in microfluidic networks

    Science.gov (United States)

    Case, Daniel; Angilella, Jean-Regis; Motter, Adilson

    2017-11-01

    Precisely controlling flows within microfluidic systems is often difficult which typically results in systems being heavily reliant on numerous external pumps and computers. Here, I present a simple microfluidic network that exhibits flow rate switching, bistablity, and spontaneous oscillations controlled by a single pressure. That is, by solely changing the driving pressure, it is possible to switch between an oscillating and steady flow state. Such functionality does not rely on external hardware and may even serve as an on-chip memory or timing mechanism. I use an analytic model and rigorous fluid dynamics simulations to show these results.