WorldWideScience

Sample records for spoil durable rock

  1. 30 CFR 816.73 - Disposal of excess spoil: Durable rock fills.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Disposal of excess spoil: Durable rock fills...-SURFACE MINING ACTIVITIES § 816.73 Disposal of excess spoil: Durable rock fills. The regulatory authority may approve the alternative method of disposal of excess durable rock spoil by gravity placement in...

  2. 30 CFR 817.73 - Disposal of excess spoil: Durable rock fills.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Disposal of excess spoil: Durable rock fills...-UNDERGROUND MINING ACTIVITIES § 817.73 Disposal of excess spoil: Durable rock fills. The regulatory authority may approve the alternative method of disposal of excess durable rock spoil by gravity placement in...

  3. Anthropogenic soils on spoil rock banks in North Bohemian Coal Basin, Czech Republic

    International Nuclear Information System (INIS)

    Raclavska, H.; Raclavsky, K.; Matysek, D.; Stalmachova, B.

    1997-01-01

    The area of the North Bohemian Coal Basin is devastated by the extensive exploitation of brown coal by open pit mining. Knowledge of newly formed soils, their properties, development and contamination is important from the point of view of biological regeneration of the landscape. The mineralogy of anthropogenic soils from the mining area is presented together with the geochemistry of nutrients and trace elements. Attention is paid to the soil-forming processes in the non-reclaimed spoil rock banks with the development of spontaneous vegetation. 3 refs., 1 fig., 4 tabs

  4. Rock as a construction material: durability, deterioration and conservation

    Directory of Open Access Journals (Sweden)

    Esbert, Rosa M.ª

    1991-03-01

    Full Text Available The different aspects related to the deterioration and conservation of stone, used as a construction material, are reviewed in this article. The petrographical characteristics and physical properties which control the durability of stone material are stated. The importance of the voids and the properties more directly linked to the up-taking and transfer of humidity through the stone are pointed out. Regarding to the deterioration processes, the role of water, soluble salts and atmospheric pollutants upon the different alteration mechanisms of the building stones is emphasized. Finally, the steps related to the stone conservation, and the methods and products more currently employed to that aim are revised.

    Se compendian los distintos aspectos relacionados con el deterioro y la conservación de la piedra utilizada como material de edificación. Se revisan las características petrográficas y propiedades físicas que controlan la durabilidad de los materiales pétreos, resaltando la importancia de los espacios vacíos y de aquellas propiedades más directamente relacionadas con la captación y transferencia de humedad por el interior de la piedra. En cuanto a los procesos de deterioro se destaca el papel del agua, de las sales solubles y de los contaminantes atmosféricos en los diversos mecanismos de alteración desarrollados en la piedra de edificación. Finalmente se plantean las diversas fases relacionadas con la conservación de la piedra, y se revisan los métodos y productos más empleados en la actualidad para tal fin.

  5. Predicting the durability of basic crystalline rocks for use as road construction materials

    CSIR Research Space (South Africa)

    Paige-Green, P

    2006-02-27

    Full Text Available www.csir.co.za Slide 13 © CSIR 2006 www.csir.co.za Durability • Must be adequate to provide 20 – 30 years service • Must not change to clay • Durability is poorly specified currently • BCR tend to be used with caution...

  6. Smectite clay identification and quantification as an indicator of basic igneous rock durability

    CSIR Research Space (South Africa)

    Leyland, RC

    2014-09-01

    Full Text Available , rendering the localized Karoo dolerite intrusions the best construction material available for many road construction projects. Historically, examples of such non-durable materials have been reported and investigated by many authors and current South African...

  7. Spoils of Truce

    DEFF Research Database (Denmark)

    Haugbølle, Sune

    2014-01-01

    Review of Spoils of Truce. Corruption and stat building in Postwar Lebanon Reinoud Leenders Ithaca, NY, Cornell University Press, 2012, ISBN 978-0-8014-5100-3......Review of Spoils of Truce. Corruption and stat building in Postwar Lebanon Reinoud Leenders Ithaca, NY, Cornell University Press, 2012, ISBN 978-0-8014-5100-3...

  8. Durability testing of basic crystalline rocks and specification for use as road base aggregate

    CSIR Research Space (South Africa)

    Paige-Green, P

    2007-02-01

    Full Text Available . This has usually resulted in the use of more expensive materials being transported further to the road project. Twelve such materials were collected from various parts of southern Africa and tested for their durability using the standard specified tests...

  9. Deterioration Mechanisms and Durability of Sprayed Concrete for Rock Support in Tunnels

    NARCIS (Netherlands)

    Hagelia, P.

    2011-01-01

    Steel fibre reinforced sprayed concretes used for rock support in tunnels are subjected to variable and complex exposure conditions. Structurally weakened concretes (5 to 35 years old) were investigated with respect to deterioration mechanisms, sources of aggressive agents and related engineering

  10. Reforestation of Bauxite mine spoils with Eucalyptus tereticornis Sm. seedlings inoculated with Arbuscular mycorrhizal fungi

    Directory of Open Access Journals (Sweden)

    A. Karthikeyan

    2012-12-01

    Full Text Available Open cast mining for bauxite at Yercaud hills (India resulted in degradation of forest ecosystem and production of large quantities of waste rocks (called mine spoils. To ameliorate mine spoils, topsoil is used to spread over before the planting of tree species, conventional method as the topsoil has a good structure, water holding capacity and beneficial microbes like Arbuscular Mycorrhizal (AM fungi essential for plant growth. However, the use of top soil is expensive and in this study bauxite mine spoils were reforestated with AM fungi instead of it. The beneficial microbes AM fungi (Glomus aggregatum Schenck & Smith, G. fasciculatum (Thatcher Gerd. & Trappe emend. Walker & Koske, G. geosporum (Nicol. & Gerd. Walker were isolated, cultured and inoculated into the seedlings ofEucalyptus tereticornis Sm. and grown in bauxite mine spoils as potting medium under nursery conditions. Then, the biomass improved seedlings of E. tereticornis with inoculation of AM fungi were directly transplanted at bauxite mine spoils. After transplantation of the seedlings at bauxite mine spoils, the growth and survival rate were monitored for two years. The AM fungi inoculated seedlings ofE. tereticornis showed 95% survival over the control seedlings and their growth was also significantly higher. Tissue nutrients (N, P, K were also found higher in AM fungi inoculated E. tereticornis than un inoculated control seedlings. 

  11. Reforestation of bauxite mine spoils with Eucalyptus tereticornis Sm. seedlings inoculated with arbuscular mycorrhizal fungi

    Directory of Open Access Journals (Sweden)

    N. Krishnakumar

    2012-11-01

    Full Text Available Open cast mining for bauxite at Yercaud hills (India resulted indegradation of forest ecosystem and production of large quantities of waste rocks (called mine spoils. To ameliorate mine spoils, topsoil is used to spread over before the planting of tree species, conventional method as the topsoil has a good structure, water holding capacity and beneficial microbes like Arbuscular Mycorrhizal (AM fungi essential for plant growth.However, the use of top soil is expensive and in this study bauxite mine spoils were reforestated with AM fungi instead of it. The beneficial microbes AM fungi (Glomus aggregatum Schenck & Smith, G. fasciculatum(Thatcher Gerd. & Trappe emend. Walker & Koske, G. geosporum(Nicol. & Gerd. Walker were isolated, cultured and inoculated into the seedlings of Eucalyptus tereticornis Sm. and grown in bauxite mine spoils as potting medium under nursery conditions. Then, the biomass improved seedlings of E. tereticornis with inoculation of AM fungi were directly transplanted at bauxite mine spoils. After transplantation of the seedlings at bauxite mine spoils, the growth and survival rate were monitored for two years. The AM fungi inoculated seedlings of E. tereticornis showed 95% survival over the control seedlings and their growth was also significantlyhigher. Tissue nutrients (N, P, K were also found higher inAM fungi inoculated E. tereticornis than un inoculated control seedlings.

  12. Phytoremediation of spoil coal dumps in Western Donbass (Ukraine)

    Science.gov (United States)

    Klimkina, Iryna; Kharytonov, Mykola; Wiche, Oliver; Heilmeier, Hermann

    2017-04-01

    At the moment, in Ukraine about 150 thousand hectares of fertile land are occupied by spoil dumps. Moreover, this figure increases every year. According to the technology used about 1500 m3 of adjacent stratum is dumped at the surface per every 1000 tons of coal mined. Apart from land amortization, waste dumps drastically change the natural landscape and pollute air, soil and water sources as the result of water and wind erosion, as well as self-ignition processes. A serious concern exists with respect to the Western Donbass coal mining region in Ukraine, where the coal extraction is made by the subsurface way and solid wastes are represented by both spoil dumps and wastes after coal processing. Sulphides, mostly pyrite (up to 4% of waste material), are widely distributed in the waste heaps freshly removed due to coal mining in Western Donbass.The oxidation of pyrite with the presence of oxygen and water is accompanied by a sharp drop in the pH from the surface layer to the spoil dumps(from 5.2-6.2 to 3.9-4.2 in soil substrates with chernozen and from 8.3-8.4 to 6.7-7.2 in soil substrates with red-brown clay, stabilizing in dump material in both cases at 2.9-3.2). Low pH generates the transformation of a number of toxic metals and other elementspresent in waste rock (e.g. Fe, Al, Mn, Zn, Mo, Co, As, Cd, Bi, Pb, U) into mobile forms. To stabilize and reduce metal mobility the most resistant plants that occur naturally in specified ecosystems can be used. On coal spoil dumpsin Western Donbas the dominant species are Bromopsis inermis, subdominant Artemisia austriaca; widespread are also Festucas pp., Lathyrus tuberosus, Inula sp., Calamagrostis epigeios, Lotus ucrainicus, and Vicias pp. Identification of plants tolerant to target metals is a key issue in phytotechnology for soil restoration. It is hypothesized that naturally occurring plants growing on coal spoil dumps can be candidates for phytostabilization, phytoextraction (phytoaccumulation) and phytomining

  13. 30 CFR 817.71 - Disposal of excess spoil: General requirements.

    Science.gov (United States)

    2010-07-01

    ... stable under all conditions of construction. (c) Compliance with permit. You, the permittee or operator... (excavations to stable bedrock) or rock-toe buttresses to ensure fill stability. (e) Placement of excess spoil... provided to minimize surface erosion at the site. All disturbed areas, including diversion channels that...

  14. 30 CFR 816.71 - Disposal of excess spoil: General requirements.

    Science.gov (United States)

    2010-07-01

    ... stable under all conditions of construction. (c) Compliance with permit. You, the permittee or operator... (excavations to stable bedrock) or rock-toe buttresses to ensure fill stability. (e) Placement of excess spoil... provided to minimize surface erosion at the site. All disturbed areas, including diversion channels that...

  15. The biological costs of not reclaiming bentonite mine spoils

    Science.gov (United States)

    Carolyn Hull Sieg; Daniel W. Uresk; Richard M. Hansen

    1982-01-01

    Bentonite clay has been mined in the northern Great Plains for more than 80 years. Until the late 1960's, mine spoil materials were left in steep piles and no effort was made to restore biological productivity to these disturbed sites. As a result, unreclaimed spoils are barren and eroded. The biological costs of not reclaiming these spoils are examined in this...

  16. Race, Commitment to Deviance, and Spoiled Identity

    Science.gov (United States)

    Harris, Anthony R.

    1976-01-01

    Data generated by 234 young black and white inmates in 1971 challenge the assumption that spoiled identity is a necessary, socially invariant outcome of deviant commitment and self-definition. For blacks, the relationship between criminal self-typing and stability and esteem is negative but inconsequential; for whites, the relationship is negative…

  17. A Spectral Emissivity Library of Spoil Substrates

    Czech Academy of Sciences Publication Activity Database

    Pivovarník, Marek; Pikl, Miroslav; Frouz, J.; Zemek, František; Kopačková, V.; Notesco, G.; Ben Dor, E.

    2016-01-01

    Roč. 1, č. 2 (2016) E-ISSN 2306-5729 R&D Projects: GA MŠk(CZ) LO1415 Institutional support: RVO:86652079 Keywords : post- mining sites * spectral emissivity * spectral library * spoil substrates Subject RIV: EH - Ecology, Behaviour OBOR OECD: Environmental sciences (social aspects to be 5.7)

  18. Improving surface stability of elevated spoil landforms using natural landform analogy and geological information

    Science.gov (United States)

    Emmerton, Bevan; Burgess, Jon; Esterle, Joan; Erskine, Peter; Baumgartl, Thomas

    2017-04-01

    Large-scale open cut mining in the Bowen Basin, Queensland, Australia has undergone an evolutionary process over the period of a few decades, transitioning from shallow mining depths, limited spoil elevation and pasture based rehabilitation to increased mining depths, escalating pre-stripping, elevated mesa-like landforms and native woody species rehabilitation. As a consequence of this development, the stabilisation of recent constructed landforms has to be assured through means other than the establishment of vegetative cover. Recent developments are the specific selection and partitioning of resilient fragmental spoil types for the construction of final landform surface. They can also be used as cladding resources for stabilizing steep erosive batters and this has been identified as a practical methodology that has the potential to significantly improve rehabilitation outcomes. Examples of improvements are an increase of the surface rock cover, roughness and infiltration and reducing inherent erodibility and runoff and velocity of surface flow. However, a thorough understanding of the properties and behavior of individual spoil materials disturbed during mining is required. Relevant information from published literature on the geological origins, lithology and weathering characteristics of individual strata within the Bowen Basin Coal Measures located in Queensland, Australia (and younger overlying weathered strata) has been studied, and related both to natural landforms and to the surface stability of major strata types when disturbed by mining. The resulting spoil classification developed from this study is based primarily on inherent geological characteristics and weathering behaviour of identifiable lithologic components, and as such describes the expected fragmental resilience likely within disturbed materials at Bowen Basin coal mines. The proposed classification system allows the allocation of spoil types to use categories which have application in pre

  19. Concrete durability

    Directory of Open Access Journals (Sweden)

    Gaspar Tébar, Demetrio

    1991-03-01

    Full Text Available The evidence that the concrete is not a material for ever was noticed from the beginning of its industrial use. In the present work, the author describes the studies carried out during the last century and the early ages of the present one, mainly devoted to the study of the durability in sea water. At the present days, and in spite of the numerous papers published from then, the study of the concrete durability continues focusing the research priorities and economical resources of researchers and industries related with this material. Moreover, the new laboratory techniques are allowing to understand old problems and even to open again the discussion on reaction mechanisms which were believed to be completely understood. The article finalizes with a brief description of the numerous studies carried out at the Institute Eduardo Torroja on concrete durability, mainly those related with the resistance against gypsum attack (so abundant in our country land and against sea water attack.

    La realidad de que el hormigón no es un material eterno y es susceptible de sufrir ataques por agentes químicos, fue constatada desde el comienzo mismo de su uso industrial. En el presente trabajo el autor enumera los estudios realizados el siglo pasado y a comienzos del presente sobre la durabilidad del hormigón en agua de mar. En la actualidad y a pesar de los numerosos trabajos desarrollados desde entonces, el estudio de la durabilidad del hormigón sigue centrando la atención prioritaria y los recursos económicos de los investigadores e industrias relacionadas con este material. Además las nuevas técnicas de estudio están permitiendo comprender antiguos problemas e incluso reabrir la discusión sobre mecanismos de reacción que se creían completamente explicados. Finaliza el artículo con una descripción somera de los múltiples trabajos realizados en el Instituto Eduardo Torreja sobre la materia, en especial los estudios realizados sobre

  20. Promising native forbs for seeding on mine spoils

    Science.gov (United States)

    Ardell J. Bjugstad; Warren C. Whitman

    1989-01-01

    Twenty nine species of perennial forbs and 2 biennial forbs were directly seeded into coal mine spoil materials at Dickinson, North Dakota to determine which species would be most successful for direct seeding into coal mine spoil. Those which showed exceptionally good emergence and vigorous growth of seedlings in a two year study were: white prairie clover (...

  1. Durability analysis of gneiss using wear resistance

    Directory of Open Access Journals (Sweden)

    José Luiz Ernandes Dias Filho

    2014-01-01

    Full Text Available This paper presents a study conducted in gneiss in Santo Antonio de Pádua, RJ, BR, including durability analysis of the rock using slake durability test. Rocks in the region of Pádua are mostly used for ornamental purposes. A lab equipment was developed to evaluate the influence of rotation in the test, allowing for the speed variation of 7 RPM to 238 RPM. This study could be implemented in a wide variety of rock materials, targeting them according to their lifetime in the project. With variation of the wear levels, increasing weight loss was observed until the inertia moment in which the sample holds to the machine wall. The results indicate an increase in linear mass loss. These procedures allow a more precise analysis of durability than can be applied in different different regions of the world.

  2. Recognizing critical mine spoil health characteristics to design ...

    Science.gov (United States)

    Biochar can be used as an amendment to remediate metal-contaminated mine spoils for improved site phytostabilization. For successful phytostabilization to occur, biochar amendments must improve mine spoil health with respect to plant rooting plus uptake of water and nutrients. An inappropriate biochar may negatively impact plant growth conditions resulting in poor plant establishment and growth. Matching the appropriate biochar for each mine site requires reconnaissance of spoil chemical and physical conditions and then identifying which properties need rectified to promote plant growth. A rectification hierarchy needs to be established with the primary limiting factor being addressed first, then successive limitations addressed simultaneously or thereafter. We posit that spoils at each site will have a unique chemical, physical, and biological signature that will affect plant growth. For example, some spoils may be extremely acidic, possess phytotoxic concentrations of heavy metals, or have physical conditions that limits water storage and root penetration. Quantifying these and other conditions beforehand allows for the production of designer biochar with specific characteristics tailored for specific plant growth deficiencies within each spoil. Additionally, we recommend the use of proximally located, undisturbed soils to establish spoil remediation targets. In our work, we have developed a decision-tree flow-chart that identifies salient chemical,

  3. Financing Durable Assets

    OpenAIRE

    Adriano Rampini

    2015-01-01

    This paper studies the financing of durable assets in a model with collateral constraints due to limited enforcement. Durability affects the ease of financing. Specifically, we show that more durable capital requires a larger down payment of internal funds per unit of capital making it harder to finance. Thus, financial constraints have a bigger impact on purchases of more durable capital, such as land, structures, and durable equipment. This basic insight has implications for the choice betw...

  4. Durabilidade de peças cerâmicas vermelhas com adição de rejeito de rocha ornamental isenta de granalha Durability of red ceramic samples with addition of ornamental rock waste free of steel particles

    Directory of Open Access Journals (Sweden)

    D. V. Rodrigues

    2012-09-01

    Full Text Available Para avaliação da degradação acelerada em laboratório sofrida pelos corpos de prova de cerâmica vermelha com adição de rejeito de rocha ornamental isento de granalha, foi utilizado um equipamento que lixivia com água quente e fria em tempos controlados, e também, congela a amostra em até -4 ºC. Os corpos de prova cerâmicos foram confeccionados com até 10% em massa de rejeito de rocha ornamental a seco, e em seguida, umedecidos e moldados por extrusão. Os materiais produzidos foram calcinados nas temperaturas de 700 ºC, 800 ºC e 900 ºC. Após 1060 h de degradação acelerada em equipamento de laboratório, analisaram-se as propriedades cerâmicas do material. Os resultados das resistências mecânicas foram comparados através da distribuição de Weibull, antes e depois da degradação. Nota-se que o material com adição de 10% de rejeito de rocha ornamental na massa cerâmica é mais confiável quando queimada a 900 ºC após a degradação, quando comparados com as amostras sem adição de rejeito, proporcionando maior durabilidade.For the evaluation of the accelerated degradation in laboratory of red ceramic specimens with addition of ornamental rock waste free from steel particles, an equipment that leach with hot and cool water and time control, and also freezing the specimen at -4 ºC was used,. The ceramic samples were made with up to 10 wt.% of the dry ornamental rock waste, and after humidifying and molding by extrusion. The specimens were fired at 700 ºC, 800 ºC and 900 ºC. After 1060 h of accelerated degradation lab test, ceramic properties were evaluated. The results of the strength were compared for Weibull distribution, before and after degradation. The specimens with addition of 10 wt.% waste is more durable and reliable when fired to 900 ºC after the degradation.

  5. Concrete aggregate durability study.

    Science.gov (United States)

    2009-06-01

    There are many factors that affect the durability of Portland cement concrete (PCC), including the mix design and the : materials used, the quality of construction, and the environment. Durability is not an intrinsic property of the concrete, but : i...

  6. Groundwater hydrogeochemical characteristics in rehabilitated coalmine spoils

    Science.gov (United States)

    Gomo, M.; Masemola, E.

    2016-04-01

    The investigation aims to identify and describe hydrogeochemical processes controlling the evolution of groundwater chemistry in rehabilitated coalmine spoils and their overall influence on groundwater quality at a study area located in the Karoo basin of South Africa. A good understanding of the processes that controls the evolution of the mine water quality is vital for the planning, application and management of post-mining remedial actions. The study utilises scatter plots, statistical analysis, PHREEQC hydrogeochemical modelling, stoichiometric reaction ratios analysis, and the expanded Durov diagram as complimentary tools to interpret the groundwater chemistry data collected from monitoring boreholes from 1995 to 2014. Measured pH ranging between 6-8 and arithmetic mean of 7.32 shows that the groundwater system is characterised by circumneutral hydrogeochemical conditions period. Comparison of measured groundwater ion concentrations to theoretical reaction stoichiometry identifies Dolomite-Acid Mine Drainage (AMD) neutralisation as the main hydrogeochemical process controlling the evolution of the groundwater chemistry. Hydrogeochemical modelling shows that, the groundwater has temporal variations of calcite and dolomite saturation indices characterised by alternating cycles of over-saturation and under-saturation that is driven by the release of sulphate, calcium and magnesium ions from the carbonate-AMD neutralization process. Arithmetic mean concentrations of sulphate, calcium and magnesium are in the order of 762 mg/L, 141 mg/L and 108 mg/L. Calcium and magnesium ions contribute to very hard groundwater quality conditions. Classification based on total dissolved solids (TDS), shows the circumneutral water is of poor to unacceptable quality for drinking purposes. Despite its ability to prevent AMD formation and leaching of metals, the dolomite-AMD neutralisation process can still lead to problems of elevated TDS and hardness which mines should be aware of

  7. Phytoremediation of coal mine spoil dump through integrated biotechnological approach

    Energy Technology Data Exchange (ETDEWEB)

    Juwarkar, A.A.; Jambhulkar, H.P. [National Environmental Engineering Research Institute, Nagpur (India)

    2008-07-15

    Field experiment was conducted on mine spoil dump on an area of 10 ha, to restore the fertility and productivity of the coal mine spoil dump using integrated biotechnological approach. The approach involves use of effluent treatment plant sludge (ETP sludge), as an organic amendment, biofertilizers and mycorrihzal fungi along with suitable plant species. The results of the study indicated that amendment with effluent treatment plant sludge (ETP sludge), at 50 ton/ha improved the physico-chemical properties of coal mine spoil. Due to biofertilizer inoculation different microbial groups such as Rhizobium, Azotobacter and VAM spores, which were practically absent in mine spoil improved greatly. Inoculation of biofertilizer and application of ETP sludge helped in reducing the toxicity of heavy metals such as chromium, zinc, copper, iron, manganese lead, nickel and cadmium, which were significantly reduced to 41%, 43%, 37%, 37%, 34%, 39%, 37% and 40%, respectively, due to the increased organic matter content in the ETP sludge and its alkaline pH (8.10-8.28), at which the metals gets immobilized and translocation of metals is arrested. Thus, amendment and biofertilizer application provided better supportive material for anchorage and growth of the plant on coal mine spoil dump.

  8. Durable solar mirror films

    Energy Technology Data Exchange (ETDEWEB)

    O' Neill, Mark B.; Henderson, Andrew J.; Hebrink, Timothy J.; Katare, Rajesh K.; Jing, Naiyong; North, Diane; Peterson, Eric M.

    2017-02-14

    The present disclosure generally relates to durable solar mirror films, methods of making durable solar mirror films, and constructions including durable solar mirror films. In one embodiment, the present disclosure relates to a solar mirror film comprising: a multilayer optical film layer including having a coefficient of hygroscopic expansion of less than about 30 ppm per percent relative humidity; and a reflective layer having a coefficient of hygroscopic expansion.

  9. The Characteristics and Fertility Status of Tin Mine Spoils of the Jos ...

    African Journals Online (AJOL)

    ... include reclaimed cropped spoil (RCS), reclaimed uncropped spoil (RUS), mining (intermound) depressions (MD), spoil mounds (SM) and surrounding flat land (SFL). Unmined Ropp soil (URS) was included as control. RCS had significantly (P < 0.05) higher amounts of total nitrogen (1.6 g kg-1) and organic carbon (13.7 ...

  10. Spoiling the womb”: Definitions, Aetiologies and responses to ...

    African Journals Online (AJOL)

    Spoiling the womb”: Definitions, Aetiologies and responses to infertility in North West Province, Cameroon. ... Now, family planning is promoted nationwide to reduce population growth, and infertility is not addressed by public health policy or services. In contrast to the biomedical definition used by planners, at the local level ...

  11. Investigation on the spoiling of meat using PTR-MS

    International Nuclear Information System (INIS)

    Mayr, D.; Maerk, T.D.; Margesin, R.; Schinner, F.

    2002-01-01

    The spoiling of meat was investigated. Beef (pork) were wrapped into different kinds of packages (air and vacuum) and stored at 4 o C for 10 (13) days. The emitted volatile organic compounds (VOCs) in the course of time were measured and a large increase in these emissions after a few days of storage was found. Also a large difference in the spoiling behavior between vacuum- and air- packed meat was observed. The measurements were performed using a proton-transfer-reaction-mass spectrometer(PTR-MS) system, it allows on-line monitoring of volatile organic compounds (VOCs) concentrations. Ethylacetate, methylpropionate, and propylformate were detected as typical spoiling compounds in pork samples. After 3.5 days the concentrations started to exponentially increase, but after 6 days remained more or less unchanged. This VOCs behaviour corresponds to a typical bacterial growth curve. Therefore, it was concluded that bacteria produce these components. In a second measurements set, the VOCs emitted by beef under aerobic (normal packed) and anaerobic (vacuum packed) conditions were compared. In the case of normal air-packed beef, the above mentioned spoiling compounds strongly increased with the time, while with the vacuum-packed beef a strong increase of ethanol was detected. This method as a replacement of the bacteriological examinations of meat spoilage is proposed. (nevyjel)

  12. stabilization of dredged spoils for pavement construction in the niger ...

    African Journals Online (AJOL)

    Dr. Tse

    to which dredge spoils can be deployed, including use as fill and construction materials, placing the dredged material at specific locations to combat erosion, and manufacturing bricks, etc. These uses will be particularly beneficial given the high rainfall intensity, extensive marsh land and frequent oil spills in the study area.

  13. 30 CFR 715.15 - Disposal of excess spoil.

    Science.gov (United States)

    2010-07-01

    ... engineer or other qualified professional specialist experienced in the construction of earth and rockfill... minesite. (11) Coal processing wastes shall not be disposed of in head-of-hollow or valley fills, and may... require a flatter slope. (c) Head-of-hollow fills. Disposal of spoil in the head-of-hollow fill shall meet...

  14. stabilization of dredged spoils for pavement construction in the niger

    African Journals Online (AJOL)

    Dr. Tse

    spoils by stabilization produces a 'conditioned' soil mix with improved strength properties suitable for use in civil engineering construction. In view of the large volumes of sand dredged from rivers along the East-West road alignment, it is thought that a beneficial scheme to use such large quantity of otherwise waste material ...

  15. Decoration and durability

    DEFF Research Database (Denmark)

    Riisberg, Vibeke; Munch, Anders V.

    2015-01-01

    ornaments appropriate or not. This leads us to suggest an array of parameters that point out different situations and meanings of ornamentation: Product categories, Durability of materials, Styles, Aesthetic experience, Emotional attachment and Historical references. We discuss these parame- ters in cases...... from fashion and tableware to archi- tecture and link ornamentation to the aesthetics of durability....

  16. Prediction of the acid generating potential of coal mining spoils

    Energy Technology Data Exchange (ETDEWEB)

    Monterroso, C.; Macias, F. [Universidad de Santiago, Santiago (Spain). Dept. de Edafologia y Quimica Agricola

    1998-07-01

    The sulfide oxidation impact on mined land reclamation makes it necessary for mine spoils to be classified according to their acidifying potential. In this paper predictions were made of the acid generating potential of sulfide-containing spoils from the Puentes lignite mine (Galicia, NW Spain), and the limits of sulfur contents allowable for their storage in aerobic conditions, were established. Using samples of fresh spoils, analyses were made of the content and speciation of sulfur, pH was measured after oxidation of the sample with H{sub 2}O{sub 2} (pH of oxidation = pH{sub OX}), and titration of the oxidation extract with 0.1N NaOH to pH = 7 was carried out (Net Acid Production = NAP). The total sulfur content (S{sub T}) varied between {lt} 0.01% and {gt} 3%, with pyritic-S being the most common form ({gt} 80%). pH{sub OX} varied between 1.6 and 6.4 and NAP between 1.2 and 85.0 Kg-CaCO{sub 3}t{sup -1}. A high correlation was found between the NAP and the S{sub T}(r-0.98, p{lt} 0.001). Spoils with S{sub T} {gt} 0.15% cause high risks of mine-soil acidification, and create the need for large doses of CaCO{sub 3} to be used on final surface of the mine dump. Use of fly ash, produced from the combustion of lignite, as an alternative to commercial lime is more effective in the control of acidity generated by spoils with high S{sub T}. 20 refs., 5 figs., 1 tab.

  17. Effects of Irradiation on Albite's Chemical Durability.

    Science.gov (United States)

    Hsiao, Yi-Hsuan; La Plante, Erika Callagon; Krishnan, N M Anoop; Le Pape, Yann; Neithalath, Narayanan; Bauchy, Mathieu; Sant, Gaurav

    2017-10-19

    Albite (NaAlSi 3 O 8 ), a framework silicate of the plagioclase feldspar family and a common constituent of felsic rocks, is often present in the siliceous mineral aggregates that compose concrete. When exposed to radiation (e.g., in the form of neutrons) in nuclear power plants, the crystal structure of albite can undergo significant alterations. These alterations may degrade its chemical durability. Indeed, careful examinations of Ar + -implanted albite carried out using Fourier transform infrared spectroscopy (FTIR) and molecular dynamics simulations show that albite's crystal structure, upon irradiation, undergoes progressive disordering, resulting in an expansion in its molar volume (i.e., a reduction of density) and a reduction in the connectivity of its atomic network. This loss of network connectivity (i.e., rigidity) results in an enhancement of the aqueous dissolution rate of albite-measured using vertical scanning interferometry (VSI) in alkaline environments-by a factor of 20. This enhancement in the dissolution rate (i.e., reduction in chemical durability) of albite following irradiation has significant impacts on the durability of felsic rocks and of concrete containing them upon their exposure to radiation in nuclear power plant (NPP) environments.

  18. Durable past, sustainable future

    NARCIS (Netherlands)

    Van Hees, R.P.J.; Naldini, S.; Roos, J.

    2014-01-01

    The section Heritage & Architecture of the Faculty of Architecture at Delft University of Technology deals with the built environment in terms of conservation, refurbishment and re-use. Reflecting the department philosophy, this book focuses on the durability and sustainability of existing buildings

  19. Decoration and Durability

    DEFF Research Database (Denmark)

    Riisberg, Vibeke; Munch, Anders V.

    2015-01-01

    appropriate or not. This leads us to suggest an array of parameters that points out different situations and meanings of ornamentation: Product categories, Durability of materials, Styles, Aesthetic experience, Emotional attachment and Historical references. We discuss these parameters in cases from fashion...

  20. Nomograms to calculate stability in slate and granite spoil heaps; Abacos para el calculo de estabilidad en escombreras de pizarra y granito

    Energy Technology Data Exchange (ETDEWEB)

    Paz Freire, M.; Taboada Castro, J.; Rivas Brea, T.; Giraldez Perez, E.; Araujo Fernandez, M.

    2011-07-01

    One of the main problems involved in the mining of slate and ornamental granite is the unavoidable generation of waste rock, which must be stored in spoil heaps under suitably integrated, secure and stable conditions. Our work here focuses on this last point. To study the risk of instability within spoil heaps we have analysed the performance of a wide number of models with regard to circular slope failure, taking into account the different degrees of compactness of the material, the characteristics of the material itself, the effect of water pressure and the geometry of the heap. From this analysis we obtained more than 300 safety criteria, which were then used to draw up a series of nomograms to allow us to determine the risk of sliding in any granite or slate spoil heap. Thus, nomograms prove themselves to be suitable, quick, easy-to-use tools for preliminary studies of new structures, for periodic analyses of existing structures and to investigate structures that are due to be modified. (Author) 24 refs.

  1. Reestablishing natural succession on acidic mine spoils at high elevations: long-term ecological restoration

    Science.gov (United States)

    Ray W. Brown; Michael C. Amacher; Walter F. Mueggler; Janice Kotuby-Amacher

    2003-01-01

    Methods for restoring native plant communities on acidic mine spoils at high elevations were evaluated in a "demonstration area" in the New World Mining District of southern Montana. Research plots installed in 1976 were assessed for 22 years and compared with adjacent native reference plant communities. A 1.5-acre (0.61-ha) area of mine spoils was shaped and...

  2. Revegetation of Alaskan coal mine spoils. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, W W; Mitchell, G A; McKendrick, J D

    1980-05-23

    Activities initiated after the start of the revegetation project on Alaskan coal mine spoils on September 1, 1979 have consisted mainly of some fall plantings (dormant seedings) and soil and coal spoil samplings and analyses. Because of the late summer start for the project, only a limited amount of field work could be initiated in plant material studies. This consisted of a fall planting at the Usibelli mine site at Healy in interior Alaska. The planting was intended to test the efficacy of seeding in the frost period following the growing season, requiring the seed to remain dormant over winter and to germinate when conditions become favorable in late spring. It also was intended as a comparison of a number of different grasses. Thirty entries were seeded in three replications. Fifteen species of grasses and a clover were included in the trial. The site provided for the trial was on overburden material along a streambed. Among the entries were eight cultivars of introduced grasses, five cultivars of native Alaskan germplasm, one introduced clover cultivar, and sixteen experimental grasses mainly of Alaskan origin.

  3. Vegetational stabilization of uranium spoil areas, grants, New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, N.E.

    1979-01-01

    Factors that could be detrimental to vegetative stabilization of uranium mine and mill waste material were examined. Physical and chemical analyses of materials from an open-pit uranium mine and material from three inactive mill tailing piles in New Mexico were performed. Analyses for selected trace elements in mill tailing material and associated vegetation from piles in New Mexico, Colorado, and Utah were also performed. Field and laboratory experiments identified problems associated with establishing vegetation on spoil material. Problems of uptake and concentration of toxic elements by plants growing on specific spoil material were also identified. Ecological observations in conjunction with physical and chemical analyses of specific geologic units, which form the overburden and waste dumps at the open-pit mine, identified a specific geologic material that, if segregated and placed on the surface of the dumps, would pose the least set of problems for a revegetation program. A pilot revegetation project verified that segregation and use of specific geologic material in the overburden could be utilized successfully and economically for reestablishment of native vegetation on mine waste material.

  4. Vegetational stabilization of uranium spoil areas, grants, New Mexico

    International Nuclear Information System (INIS)

    Kelley, N.E.

    1979-01-01

    Factors that could be detrimental to vegetative stabilization of uranium mine and mill waste material were examined. Physical and chemical analyses of materials from an open-pit uranium mine and material from three inactive mill tailing piles in New Mexico were performed. Analyses for selected trace elements in mill tailing material and associated vegetation from piles in New Mexico, Colorado, and Utah were also performed. Field and laboratory experiments identified problems associated with establishing vegetation on spoil material. Problems of uptake and concentration of toxic elements by plants growing on specific spoil material were also identified. Ecological observations in conjunction with physical and chemical analyses of specific geologic units, which form the overburden and waste dumps at the open-pit mine, identified a specific geologic material that, if segregated and placed on the surface of the dumps, would pose the least set of problems for a revegetation program. A pilot revegetation project verified that segregation and use of specific geologic material in the overburden could be utilized successfully and economically for reestablishment of native vegetation on mine waste material

  5. Durability of Biomass Briquettes

    OpenAIRE

    Kaķītis, A.; Nulle, I.

    2006-01-01

    The main resources for biomass agro-ecotechnologies are cereal straw residues, energy crops and emergent vegetation from wetlands. The herbaceous biomass is a material of low density (20 – 60kg/m3) therefore new mobile equipment and technologies for biomass comminution and densification have to be worked out. To guarantee the quality of biomass briquettes in the handling and usage process, sufficient durability of briquettes should be provided. National Standards of biomass briquettes should ...

  6. Accumulation of some metals by legumes and their extractability from acid mine spoils. [USA - Alabama

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, R.W.; Ibeabuchi, I.O.; Sistani, K.R.; Shuford, J.W. (Alabama A M University, Normal, AL (USA). Dept. of Plant and Soil Science)

    A greenhouse study was conducted to investigate the growth (dry matter yield) of selected legume cover crops; phytoaccumulation of metals such as Zn, Mn, Pb, Cu, Ni, and Al; the extractability of heavy metals from three different Alabama acid mine spoils. The spoils were amended based on soil test recommended levels of N, P, K, Ca and Mg prior to plant growth. Metals were extracted by three extractants (Mehlich 1, DTPA, and 0.1 M HCl) and values correlated with their accumulation by the selected legumes. Among the cover crops, kobe lespedeza {ital Lespedeza striata} (Thung.) Hook and Arn, sericea lespedeza {ital Lespedeza cuneata} (Dum.) G. Don, and red clover (Trifolium pratense L.) did not survive the stressful conditions of the spoils. However, cowpea (Vigna unguiculata L.) followed by Bragg' soybean {ital Glycine max} (L.) Merr. generally produced the highest dry matter yield while accumulating the largest quantity of metals, except Al, from spoils. The extractability of most metals from the spoils was generally in the order of: 0.1 MHCl {gt} DTPA. Mehlich 1 did not extract Pb and 0.1 M HCl did not extract Ni, whereas DTPA extracted all the metals in a small amount relative to HCl and Mehlich 1. All the extractants were quite effective in removing plant-available Zn from the spoils. In general, the extractants' ability to predict plant-available metals depended on the crop species, spoil type, and extractant used. 28 refs., 4 tabs.

  7. Durability 2007. Injection grout investigations. Background description

    International Nuclear Information System (INIS)

    Orantie, K.; Kuosa, H.

    2008-12-01

    The aim of this project was to evaluate the durability risks of injection grouts. The investigations were done with respect to the application conditions, materials and service life requirements at the ONKALO underground research facility. The study encompassed injection grout mixtures made of ultrafine cement with and without silica fume. Some of the mixtures hade a low pH and thus a high silica fume content. The project includes a background description on durability literature, laboratory testing programme, detailed analysis of results and recommendations for selecting of ideal grout mixtures. The background description was made for the experimental study of low-pH and reference rock injection grouts as regards pore- and microstructure, strength, shrinkage/swelling and thus versatile durability properties. A summary of test methods is presented as well as examples, i.e. literature information or former test results, of expected range of results from the tests. Also background information about how the test results correlate to other material properties and mix designs is presented. Besides the report provides basic information on the pore structure of cement based materials. Also the correlation between the pore structure of cement based materials and permeability is shortly discussed. The test methods included in the background description are compressive strength, measurement of bulk drying, autogenous and chemical shrinkage and swelling, hydraulic conductivity / permeability, capillary water uptake test, mercury intrusion porosimetry (MIP) and thin section analysis. Three main mixtures with water-binder ratio of 0.8, 1.0 and 1.4 and silica fume content of 0, 15 and 40% were studied in the laboratory. Besides two extra mixtures were studied to provide additional information about the effect of varying water-dry-material ratio and silica fume content on durability. The evaluation of water tightness based on water permeability coefficient and micro cracking was

  8. Selenium transformation in coal mine spoils: Its environmental impact assessment

    Energy Technology Data Exchange (ETDEWEB)

    Harness, J.; Atalay, A.; Koll, K.J.; Zhang, H.; Maggon, D.

    1991-12-31

    The objective of this program was to conduct an environmental impact assessment study for selenium from coal mine spoils. The use of in-situ lysimetry to predict selenium speciation, transformation, and mobility under natural conditions was evaluated. The scope of the study was to construct and test field-scale lysimeter and laboratory mini-column to assess mobility and speciation of selenium in coal mine overburden and soil systems; to conduct soil and groundwater sampling throughout the state of Oklahoma for an overall environmental impact assessment of selenium; and to conduct an in-depth literature review on the solubility, speciation, mobility, and toxicity of selenium from various sources. Groundwater and surface soil samples were also collected from each county in Oklahoma. Data collected from the lysimeter study indicated that selenium in the overburden of the abandoned mine site was mainly found in the selenite form. The amount of selenite found was too low and immobile to be of concern to the environment. The spoil had equilibrated long enough (over 50 years) that most of the soluble forms of selenium have already been lost. Examination of the overburden indicated the presence of pyrite crystals that precipitated over time. The laboratory mini-column study indicated that selenite is quite immobile and remained on the overburden material even after leaching with dilute acid. Data from groundwater samples indicated that based on the current permissible level for selenium in groundwater (0.01 mg Se/L), Oklahoma groundwater is widely contaminated with the element. However, according to the new regulation (0.05 mg Se/L), which is to be promulgated in 1992, only 9 of the 77 counties in the state exceed the limit.

  9. Durable consumption, saving and retirement

    DEFF Research Database (Denmark)

    Andersen, Torben M.; Hermansen, Mikkel Nørlem

    2014-01-01

    Durables yield services through life but are also a store of value and both features may have important implications for savings and retirement decisions. Durables also affect bequest and thus induce intergenerational transfers. We show that allowing explicitly for durables has important implicat......Durables yield services through life but are also a store of value and both features may have important implications for savings and retirement decisions. Durables also affect bequest and thus induce intergenerational transfers. We show that allowing explicitly for durables has important...... implications for retirement decisions and responses to various changes in the environment. An improvement in the possibility of freeing housing capital makes the old retire earlier (income effect) while the young plan to retire later since they increase housing demand and reduce financial savings. Considering...

  10. Effects of contaminated dredge spoils on wetland plant communities: A literature review

    Science.gov (United States)

    Stewart, Paul M.; Garza, Eric L.; Butcher, Jason T.; Simon, Thomas P.

    2003-01-01

    Contaminated dredge spoil is a national concern due to its scope and effects on biota, water quality, and the physical environment. This literature review discusses the effects of contaminated dredge spoils on wetland plant communities. Plant communities naturally shift over time with changing environmental conditions. Addition of toxins and nutrients and changes in hydrology may influence plant community structure. The storage and disposal of nutrient and metal contaminated dredge spoils may cause shifts in nearby plant communities. Shifts in species composition and diversity may not be observed for decades after nutrient enrichment, causing any disturbance to remain undetected. Plant community shifts often have great amounts of inertia and are difficult to reverse.

  11. Rock fragmentation

    Energy Technology Data Exchange (ETDEWEB)

    Brown, W.S.; Green, S.J.; Hakala, W.W.; Hustrulid, W.A.; Maurer, W.C. (eds.)

    1976-01-01

    Experts in rock mechanics, mining, excavation, drilling, tunneling and use of underground space met to discuss the relative merits of a wide variety of rock fragmentation schemes. Information is presented on novel rock fracturing techniques; tunneling using electron beams, thermocorer, electric spark drills, water jets, and diamond drills; and rock fracturing research needs for mining and underground construction. (LCL)

  12. Review of durability of cementitious engineered barriers in repository environments

    International Nuclear Information System (INIS)

    Parrott, L.J.; Lawrence, C.D.

    1992-01-01

    This report is concerned with the durability of cementitious engineered barriers in a repository for low and intermediate level nuclear waste. Following the introduction the second section of the review identifies the environmental conditions associated with a deep, hard rock repository for ILW and LLW that are relevant to the durability of cementitious barriers. Section three examines the microstructure and macrostructure of cementitious materials and considers the physical and chemical processes of radionuclide immobilization. Potential repository applications and compositions of cementitious materials are reviewed in Section four. The main analysis of durability is dealt with in Section five. The different types of cementitious barrier are considered separately and their most probable modes of degradation are analysed. Concluding remarks that highlight critical technical matters are given in Section six. (author)

  13. Plains hydrology and reclamation project: Spoil ground-water chemistry and its impacts on surface water

    Energy Technology Data Exchange (ETDEWEB)

    Trudell, M.R.

    1988-01-01

    Description of the chemical makeup of spoil groundwater at Diplomat and Vesta mines in the Battle River mining area, 200 km southeast of Edmonton within the Lower Horseshoe Canyon coal zone; and at Highvale and Whitewood Mines in the Lake Wabamun mining area, 100 km west of Edmonton within the Ardley coal zone. This report compares the chemical characteristics of the spoil groundwater for each mine to those of the principal premining aquifer that is disrupted by surface mining. The characterization of spoil groundwater chemistry is based on the sampling and analyses of groundwater from piezometers installed in reclaimed areas. Forty-three samples were collected from 23 piezometers at Vesta Mine, and 54 samples were collected from 32 piezometers at Diplomat Mine. At Highvale Mine, 29 samples were collected from 13 piezometers installed in the reclaimed area at Pit 01. Eleven samples were also collected from piezometers installed in spoil at Whitewood Mine to augment a study of that site.

  14. Load Bearing and Deformation Characteristics of Granular Spoils under Unconfined Compressive Loading for Coal Mine Backfill

    Directory of Open Access Journals (Sweden)

    Guodong Li

    2016-01-01

    Full Text Available The load bearing capacity and deformation response of granular spoils under uniaxial compression are numerically and experimentally investigated, aiming to shed light on the performance of back filled waste spoils while controlling ground subsidence after coal extraction. In numerical study, the particles are assembled in PFC commercial code in light of the digitized real shape of spoils with image technique, which is proved to be consistent with the physical test. The results from numerical and laboratory experiments showed that the complete compressive process of spoils tended to have spatial and temporal characteristics. The load-strain curves of investigated specimens could be divided into three stages (stage I, rearranging stage; stage II, breaking stage; stage III, consolidating stage and three zones (I, rearranging zone; II, interlocking zone; III, consolidated zone from outside to inside. During stage I, the load increasing rate of smaller spoils is relatively low, but it increases faster than larger ones in stages II and III. In addition, spoils with Talbot’s gradation are greater than single gradations. The magnitude of the density in consolidated zone is maximum, indicating that it is the main part holding the overlying strata weight.

  15. Identification of ecotype-specific marker genes for categorization of beer-spoiling Lactobacillus brevis.

    Science.gov (United States)

    Behr, Jürgen; Geissler, Andreas J; Preissler, Patrick; Ehrenreich, Armin; Angelov, Angel; Vogel, Rudi F

    2015-10-01

    The tolerance to hop compounds, which is mainly associated with inhibition of bacterial growth in beer, is a multi-factorial trait. Any approaches to predict the physiological differences between beer-spoiling and non-spoiling strains on the basis of a single marker gene are limited. We identified ecotype-specific genes related to the ability to grow in Pilsner beer via comparative genome sequencing. The genome sequences of four different strains of Lactobacillus brevis were compared, including newly established genomes of two highly hop tolerant beer isolates, one strain isolated from faeces and one published genome of a silage isolate. Gene fragments exclusively occurring in beer-spoiling strains as well as sequences only occurring in non-spoiling strains were identified. Comparative genomic arrays were established and hybridized with a set of L. brevis strains, which are characterized by their ability to spoil beer. As result, a set of 33 and 4 oligonucleotide probes could be established specifically detecting beer-spoilers and non-spoilers, respectively. The detection of more than one of these marker sequences according to a genetic barcode enables scoring of L. brevis for their beer-spoiling potential and can thus assist in risk evaluation in brewing industry. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Laboratory rainfall simulator studies of selected open-cut coal mine overburden spoils from Central Queensland

    Energy Technology Data Exchange (ETDEWEB)

    Evans, K.G.; Loch, R.J.; Aspinall, T.O.; Bell, L.C. [Eros and Hydrology Group, Jabiru, NT (Australia)

    1997-05-01

    Data on the erodibility of overburden spoils resulting from open-cut coal mining are limited. These data are required to derive parameters for erosion prediction models which can be used in the design of re-formed landscapes after mining. In this study, laboratory rainfall simulation data were used to derive CREAMS (Chemicals, Runoff and Erosion from Agricultural Management Systems) interfill erodibility parameters K and n{sub bov} for Central Queensland coal mine overburden spoils. For the spoils studied, K values ranged from 0.0111 to 0.1398 Mg ha h/(ha MJ mm) and n{sub bov} values ranged from 0.0004 to 0.0081. Sediment yield was transport controlled. Results for 1 spoil, South Blackwater Terang, showed that total soil loss increased linearly with slope, and both K and n{sub bov} varied non-linearly with slope. If a constant set of K and n{sub bov} values is used in modelling, CREAMS over-predicts spoil loss for slopes greater than that for which the parameter values were determined, and under-predicts spoil loss for slopes less than that for which the parameter values were determined.

  17. Influences of humic and fulvic acids and organic matter on leachate chemistry from acid coal spoil

    International Nuclear Information System (INIS)

    Gentry, C.E.; Davidson, W.H.; Wade, G.L.

    1994-01-01

    Column-leaching experiments were conducted on an acid pyritic coal spoil to determine the influence of acid rain, humic acid (HA), fulvic acid (FA), and undecomposed organic matter (OM) on pH and Al, Fe, Mn, and SO 4 concentrations in the spoil leachate and on the spoil. Simulated acid rain of pH 4.0 was applied for 50 weeks under laboratory conditions to spoil columns modified with 0.5% FA or HA, or 2.0% OM from four forest trees and two herbs. Quality-control methods were used to evaluate treatment effects. Addition of HA and tall fescue leaf material to a Lily, KY, spoil created a greater and longer lasting desirable effect on leachate pH and Al, Fe, Mn, and SO 4 than additions of FA or OM of five other species. Results suggest that revegetation resulting in rapid production of matured soil OM may reduce the amount of some ions commonly leached from acid mine spoils

  18. Durability of fired clay bricks containing granite powder

    OpenAIRE

    Xavier, G. C.; Saboya, F.; Maia, P. C.; Alexandre, J.

    2012-01-01

    Over the past few decades, hundreds of papers have been published on the benefits of including rock powder as a raw material in fired clay brick manufacture. Very little has been written, however, about the durability and long-term behaviour of the final product. As a rule, the ceramic bricks used in construction in developing countries are fired at low temperatures, which detracts from their mechanical performance. This is particularly visible in harsh environmental conditions, where weather...

  19. Acetobacter oeni sp. nov., isolated from spoiled red wine.

    Science.gov (United States)

    Silva, Luis R; Cleenwerck, Ilse; Rivas, Raúl; Swings, Jean; Trujillo, Martha E; Willems, Anne; Velázquez, Encarna

    2006-01-01

    A bacterial strain, designated B13T, was isolated from spoiled red wine from the Dão region, Portugal. The strain was Gram-negative, strictly aerobic, rod-shaped and motile. Phylogenetic analysis on the basis of 16S rRNA gene sequences indicated that B13T belonged to the genus Acetobacter within the Alphaproteobacteria. The closest related species was Acetobacter aceti, with 98.4 % 16S rRNA gene sequence similarity. DNA-DNA hybridization showed that B13T constituted a taxon separate from the Acetobacter species with validly published names. The DNA G+C content of B13T was 58.1 mol%. Phenotypic characteristics of B13T allowed its differentiation from the recognized Acetobacter species. B13T produced 5-ketogluconic acid from glucose, but no 2-ketogluconic acid. It produced catalase, but no oxidase. It utilized glycerol, but not maltose, ethanol or methanol as carbon sources. On the basis of the results obtained, B13T represents a novel species for which the name Acetobacter oeni sp. nov. is proposed. The type strain is B13T (= LMG 21952T = CECT 5830T).

  20. Merits of partial shielding in dumping sediment spoils.

    Science.gov (United States)

    Jensen, Jacob Hjelmager; Saremi, Sina; Jimenez, Carlos; Hadjioannou, Louis

    2015-12-15

    The commonly adopted method of dumping dredge spoil at sea using split-hull barges leads to considerable sediment loss to the water column and a subsequent dispersion of fine material that can pose a risk to sensitive "downstream" habitats such as coral reefs. Containing sediment loads using stitched closed geotextile bags is practiced for minimizing loss of contaminated sediment, but is expensive in terms of operational efficiency. Following promising observations from initial laboratory trials, the plunging of partially shielded sediment loads, released on open sea, was studied. The partial shielding was achieved with rigid, open containers as well as flexible, open bags. The loss of sediment from these modes of shielding was measured, and it was observed that even limited and unstitched shielding can be effective in debilitating the entrainment of water into the descending load. In particular, long-sleeved flexible bags practically self-eliminated the exposure of the load and thus losses. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Science Rocks!

    Science.gov (United States)

    Prestwich, Dorothy; Sumrall, Joseph; Chessin, Debby A.

    2010-01-01

    It all began one Monday morning. Raymond could not wait to come to large group. In his hand, he held a chunk of white granite he had found. "Look at my beautiful rock!" he cried. The rock was passed around and examined by each student. "I wonder how rocks are made?" wondered one student. "Where do they come from?"…

  2. Rock Pore Structure as Main Reason of Rock Deterioration

    Science.gov (United States)

    Ondrášik, Martin; Kopecký, Miloslav

    2014-03-01

    even when the temperature decreases to -20 ºC, and the second group F in which the pore water freezes. It has been found that the rocks from group N contain critical portion of adsorbed water in pores which prevents freezing of the pore water. The presence of adsorbed water enables thermodynamic processes related to osmosis which are dominantly responsible for deterioration of rocks from group N. A high correlation (R = 0.81) between content of adsorbed water and freeze-thaw loss was proved and can be used as durability estimator of rocks from group N. The rock deterioration of group F is caused not only by osmosis, but also by some other processes and influences, such as hydraulic pressure, permeability, grain size, rock and mineral tensile strength, degree of saturation, etc., and the deterioration cannot be predicted yet without the freeze-thaw test. Since the contents of absorbed water and ratio between adsorbed and bulk water (of which the absorbed water consists) is controlled by the porosity and pore structure, it can be concluded that the deterioration of some rocks is strongly related to rock pore structure.

  3. Durability Evaluation of Superconducting Magnets

    International Nuclear Information System (INIS)

    Inoue, Akihiko; Ogata, Masafumi; Nakauchi, Masahiko; Asahara, Tetsuo; Herai, Toshiki; Nishikawa, Yoichi

    2006-01-01

    It is one of the most essential things to verify the durability of devices and components of JR-Maglev system to realize the system into the future inauguration. Since the load requirements were insufficient in terms of the durability under vibrations under mere running tests carried out on Yamanashi Maglev Test Line hereinafter referred to YMTL, we have developed supplemental method with bench tests. Superconducting magnets hereinafter referred to SCM as used in the experimental running for the last seven years on the YMTL were brought to Kunitachi Technical Research Institute; we conducted tests to evaluate the durability of SCM up to a period of the service life in commercial use. The test results have indicated that no irregularity in each part of SCM proving that SCM are sufficiently durable for the practical application

  4. Reformate fuel cell system durability

    Energy Technology Data Exchange (ETDEWEB)

    Borup, R. L. (Rodney L.); Inbody, M. A. (Michael A.); Uribe, F. A. (Francisco A.); Tafoya, J. (Jose I.)

    2002-01-01

    The goal of this research is to identify the factors limiting the durability of fuel cells and fuel processors. This includes identifying PEM fuel cell durability issues for operating on pure hydrogen, and those that arise from the fuel processing of liquid hydrocarbons (e.g., gasoline) as a function of fuel composition and impurity content. Benchmark comparisons with the durability of fuel cells operating on pure hydrogen are used to identify limiting factors unique to fuel processing. We describe the design, operation and operational results of the durability system, including the operating conditions for the system, fuel processor sub-section operation over 1000 hours, post-mortem characterization of the catalysts in the fuel processor, and single cell operation.

  5. Lactobacillus cerevisiae sp. nov., isolated from a spoiled brewery sample.

    Science.gov (United States)

    Koob, Jennifer; Jacob, Fritz; Wenning, Mareike; Hutzler, Mathias

    2017-09-01

    A Gram-stain-positive, non-motile, rod-shaped bacterium, designated TUM BP 140423000-2250T (=DSM 100836T=LMG 29073T), was isolated from spoiled beer. This bacterium did not form spores, and was catalase-negative and facultatively anaerobic. Its taxonomic position was determined in a polyphasic study. The 16S rRNA gene sequence similarity data showed that the strain belonged to the Lactobacillus genus with the nearest neighbours being Lactobacillus koreensis DCY50T (sequence similarity 99.5 %), Lactobacillus yonginensis THK-V8T (99.2 %) and Lactobacillus parabrevis LMG 11984T (98.7 %). Sequence comparisons of additional phylogenetic markers, pheS and rpoA, confirmed the 16S rRNA gene sequence tree topology. The maximum rpoA sequence similarity was 92.3 % with L. yonginensis THK-V8T. The DNA G+C content of the isolate was 50.0 mol%. The DNA-DNA relatedness showed that strain TUM BP 140423000-2250T could be clearly distinguished from L. koreensis DCY 50T (30.8±0.4 %) and L. yonginensis THK-V8T (23.6±5.9 %). The major fatty acids were C18 : 1ω9c, summed feature 7 (comprised of C19 : 0 cyclo ω10c/C19 : 1ω6c) and C16 : 0. Based on phenotypic and genotypic studies, the authors propose classifying the new isolate as a representative of a novel species of the genus Lactobacillus, Lactobacillus cerevisiae sp. nov. The type strain is deposited at the Research Centre Weihenstephan for Brewing and Food Quality as TUM BP 140423000-2250T (=DSM 100836T=LMG 29073T).

  6. Vetiver Grass: a potential tool for phytoremediation of iron ore mine site spoil dump

    Directory of Open Access Journals (Sweden)

    Anita Mukherjee

    2015-06-01

    Full Text Available The impact of mining has lead to the generation of a large amount of spoil dumps that has become dangerous to human health, wildlife and biodiversity. Thus it is essential that the post mining areas and waste land generated need to be rapidly vegetated. Vetiver grass (Chrysopogon zizanioides (L. Roberty is a tropical plant which grows naturally in various soil conditions and is well known for its ability to resist DNA damage while growing on typically polluted soil conditions. The spoil dumps from the iron mine site is unstable and inhospitable for plant growth due to presence of various toxic heavy metals like - Fe, Mn, Zn, Cu, Pb, Ni, Cr, Cd etc. Vetiver system is an efficient bio-engineering tool for reclaiming such spoil dumps. There are 12 known species of Vetiver grass, and many hundreds of different cultivars that are exploited by users depending on need. In the present study we selected the polyploid infertile variety of vetiver and carried pot experiments. Vetiver plants grown on the iron ore mine spoil dump show distinct differences in their growth with fewer numbers of tillers, reduced chlorophyll content, upregulation of antioxidant enzymes and increased proline content. To investigate the level of DNA damage incurred and change in the genetic stability Comet assay and RAPD analysis were performed. Results confirmed that Vetiver grass can serve as a model species for phytoremediating the iron ore mine spoil dumps.

  7. Establishment of native species on amended and unamended coal mine spoil in central Queensland

    International Nuclear Information System (INIS)

    Bell, L.C.; Mulligan, D.R.; Orr, M.S.; Johnstone, P.

    1994-01-01

    At the Curragh open-cut coal mine in central Queensland, tree and shrub growth on amended and unamended spoil was assessed over a 5-year period. The most successful media in terms of seedling densities were bare spoil and spoil covered by a thin layer of coarse coal reject. Where soil was replaced, very few native species established due to the intense competition from exotic grasses. Given this poor establishment on soil, the question of how well an ecosystem would develop on non-soil media was addressed by assessing the ability of each of the media to support sustainable communities in the longer term. Early results from direct-seeding tree and shrub species onto non-soil media have been quite encouraging, but analysis of the surface horizons has shown that after several years, there are still some characteristics which could either limit the re-establishment, and/or prevent the sustainability, of new communities. Due primarily to the high sulfate levels originally in the coal reject, the surface salinity in these treatments was much higher than in the uncapped spoil. Substrate analyses have shown also that there was a much lower concentration of mineralizable N in the spoil and coal reject than in the soil, revealing that the potential of these non-soil substrates to continue supplying nitrogen to the system is greatly reduced. Furthermore, the concentration of microbial biomass carbon was significantly lower in these media, and the percentage ground cover after 5 years was generally <10%

  8. PEM fuel cell durability studies

    Energy Technology Data Exchange (ETDEWEB)

    Borup, Rodney L [Los Alamos National Laboratory; Davey, John R [Los Alamos National Laboratory; Ofstad, Axel B [Los Alamos National Laboratory; Xu, Hui [Los Alamos National Laboratory

    2008-01-01

    The durability of polymer electrolyte membrane (PEM) fuel cells is a major barrier to the commercialization for stationary and transportation power applications. For transportation applications, the durability target for fuel cell power systems is a 5,000 hour lifespan and able to function over a range of vehicle operating conditions (-40{sup o} to +40{sup o}C). However, durability is difficult to quantify and improve because of the quantity and duration of testing required, and also because the fuel cell stack contains many components, for which the degradation mechanisms, component interactions and effects of operating conditions are not fully understood. These requirements have led to the development of accelerated testing protocols for PEM fuel cells. The need for accelerated testing methodology is exemplified by the times required for standard testing to reach their required targets: automotive 5,000 hrs = {approx} 7 months; stationary systems 40,000 hrs = {approx} 4.6 years. As new materials continue to be developed, the need for relevant accelerated testing increases. In this investigation, we examine the durability of various cell components, examine the effect of transportation operating conditions (potential cycling, variable RH, shut-down/start-up, freeze/thaw) and evaluate durability by accelerated durability protocols. PEM fuel cell durability testing is performed on single cells, with tests being conducted with steady-state conditions and with dynamic conditions using power cycling to simulate a vehicle drive cycle. Component and single-cell characterization during and after testing was conducted to identify changes in material properties and related failure mechanisms. Accelerated-testing experiments were applied to further examine material degradation.

  9. Recreating Rocks

    DEFF Research Database (Denmark)

    Posth, Nicole R

    2008-01-01

    Nicole Posth and colleagues spent a month touring South African rock formations in their quest to understand the origin of ancient iron and silicate layers.......Nicole Posth and colleagues spent a month touring South African rock formations in their quest to understand the origin of ancient iron and silicate layers....

  10. Durable silver coating for mirrors

    Science.gov (United States)

    Wolfe, Jesse D.; Thomas, Norman L.

    2000-01-01

    A durable multilayer mirror includes reflective layers of aluminum and silver and has high reflectance over a broad spectral range from ultraviolet to visible to infrared. An adhesion layer of a nickel and/or chromium alloy or nitride is deposited on an aluminum surface, and a thin layer of silver is then deposited on the adhesion layer. The silver layer is protected by a passivation layer of a nickel and/or chromium alloy or nitride and by one or more durability layers made of metal oxides and typically a first layer of metal nitride. The durability layers may include a composite silicon aluminum nitride and an oxinitride transition layer to improve bonding between nitride and oxide layers.

  11. Durable silver coating for mirrors

    International Nuclear Information System (INIS)

    Wolfe, J.D.; Thomas, N.L.

    2000-01-01

    A durable multilayer mirror includes reflective layers of aluminum and silver and has high reflectance over a broad spectral range from ultraviolet to visible to infrared. An adhesion layer of a nickel and/or chromium alloy or nitride is deposited on an aluminum surface, and a thin layer of silver is then deposited on the adhesion layer. The silver layer is protected by a passivation layer of a nickel and/or chromium alloy or nitride and by one or more durability layers made of metal oxides and typically a first layer of metal nitride. The durability layers may include a composite silicon aluminum nitride and an oxinitride transition layer to improve bonding between nitride and oxide layers

  12. Art Rocks with Rock Art!

    Science.gov (United States)

    Bickett, Marianne

    2011-01-01

    This article discusses rock art which was the very first "art." Rock art, such as the images created on the stone surfaces of the caves of Lascaux and Altimira, is the true origin of the canvas, paintbrush, and painting media. For there, within caverns deep in the earth, the first artists mixed animal fat, urine, and saliva with powdered minerals…

  13. Durability of air lime mortar

    DEFF Research Database (Denmark)

    Nielsen, Anders

    2016-01-01

    materials, which are omitted from standards for new masonry buildings, where use of hydraulic binders is prescribed. The reasons for the durability seam to be two: 1. The old mortars have high lime contents. 2. The carbonation process creates a pore structure with a fine pored outer layer and coarser pores......This contribution deals with the physical and chemical reasons why pure air lime mortars used in masonry of burned bricks exposed to outdoor climate have shown to be durable from the Middle Ages to our days. This sounds strange in modern times where pure air lime mortars are regarded as weak...

  14. Rock Physics

    DEFF Research Database (Denmark)

    Fabricius, Ida Lykke

    2017-01-01

    Rock physics is the discipline linking petrophysical properties as derived from borehole data to surface based geophysical exploration data. It can involve interpretation of both elastic wave propagation and electrical conductivity, but in this chapter focus is on elasticity. Rock physics is based...... on continuum mechanics, and the theory of elasticity developed for statics becomes the key to petrophysical interpretation of velocity of elastic waves. In practice, rock physics involves interpretation of well logs including vertical seismic profiling (VSP) and analysis of core samples. The results...

  15. Effect of stylolites on the durability of building stones : Two case studies

    NARCIS (Netherlands)

    Larbi, J.A.

    2003-01-01

    The mechanical properties and the durability of natural building stones are influenced to a large extent by inherent inhomogeneities. One of such inhomogeneities is a stylolite, particularly when it occuts in carbonate-rich rocks. Stylolites are irregular surfaces in which small tooth-like

  16. Does the sequence of plant dominants affect mycorrhiza development in simulated succession on spoil banks?

    Czech Academy of Sciences Publication Activity Database

    Püschel, David; Rydlová, Jana; Vosátka, Miroslav

    2008-01-01

    Roč. 302, 1-2 (2008), s. 273-282 ISSN 0032-079X R&D Projects: GA MŠk(CZ) 1M0571 Institutional research plan: CEZ:AV0Z60050516 Keywords : arbuscular mycorrhizal fungi * plant succession * spoil banks Subject RIV: EF - Botanics Impact factor: 1.998, year: 2008

  17. Forest-biological erosion control on coal-mine spoil banks in Bulgaria

    International Nuclear Information System (INIS)

    Haigh, M.J.; Gentcheva-Kostadinova, S.; Zheleva, E.

    1995-01-01

    The forest fallowing of coal-mine spoils helps re-establish the processes of natural, self-sustaining, soil formation. Environmental monitoring in Bulgaria demonstrates that forestation can moderate soil pH (from ph> 3.0 to pH 1.3 g/cm 3 in the 0-5 cm layer) in the case of coal briquette spoils at Pernik, near Sofia. Ground losses from forested, 16-17 degree slope, coal briquette-spoils at Pernik are a quarter of those from an entirely unvegetated section of the same embankment (48.5 vs 12. 1 mm in the period 1988-1994) despite the absence of ground cover beneath the trees. On lignite spoil banks, at Maritsa-Iztok, central Bulgaria, forestation increases the organic content of the soil to greater depths than revegetation with grass, and to a greater degree than conventional agricultural cultivation. On Pinus nigra forested crest sites at Pernik, and in Robinia pseudacacia forested groves on the lignite minespoil banks at Maritsa-Iztok, slopes showed ground advance rather than ground retreat. Slopes protected by mechanical means alone did not allow soil growth and, where the structure broke down, they suffered as much erosion as untreated sites. In sum, the forest fallowing of surface coal-mine disturbed land accelerates organic matter accumulation in the soil, helps improve soil structure, reduces erosion, and may transform soil loss into soil gain, even on steeply sloping sites. 17 refs., 3 figs., 1 tab

  18. Earthworm succession in afforested colliery spoil heaps in the Sokolov region, Czech Republic

    Czech Academy of Sciences Publication Activity Database

    Pižl, Václav

    2001-01-01

    Roč. 9, č. 4 (2001), s. 359-364 ISSN 1061-2971 Institutional research plan: CEZ:AV0Z6066911 Keywords : earthworms * colliery spoil heaps * succession Subject RIV: EH - Ecology, Behaviour Impact factor: 1.011, year: 2001

  19. Photobacterium piscicola sp. nov., isolated from marine fish and spoiled packed cod

    NARCIS (Netherlands)

    Figge, Marian; Cleenwerck, Ilse; van Uijen, Astrid; de Vos, Paul; Huys, Geert; Robertson, Lesley

    Five isolates from marine fish (W3T, WM, W1S, S2 and S3) and three isolates misclassified as Photobacterium phosphoreum, originating from spoiled modified atmosphere packed stored cod (NCIMB 13482 and NCIMB 13483) and the intestine of skate (NCIMB 192), were subjected to a polyphasic taxonomic

  20. Rock Foundations

    National Research Council Canada - National Science Library

    1994-01-01

    .... Chapter 4 provides guidance on rock mass characterization and classification schemes. Chapters 5 and 6 provide guidance on related topic areas of foundation deformation and settlement and foundation bearing capacity, respectively...

  1. Soil quality and carbon sequestration in a reclaimed coal mine spoil of Jharia coalfield, India

    Science.gov (United States)

    Mukhopadhyay, Sangeeta; Masto, Reginald; Ram, Lal

    2016-04-01

    Revegetation of coal mine spoil helps in carbon storage and the success of remediation depend on the selection of appropriate tree species. A study was conducted at the coalmine overburden dumps of Jharia Coalfield, Dhanbad, India to evaluate the impact of revegetation on the overall soil quality and carbon sequestration. Morphological parameters (tree height, diameter at breast height, tree biomass, wood specific gravity) of the dominant tree species (Acacia auriculiformis, Cassia siamea, Dalbergia sissoo and Leucaena leucocephala) growing on the mine spoil was recorded. Mine spoil samples were collected under the canopy cover of different tree species and analyzed for soil physical, chemical, and biological parameters. In general reclaimed sites had better soil quality than the reference site. For instance, D. sissoo and C. siamea improved soil pH (+28.5%, +27.9%), EC (+15.65%, +19%), cation exchange capacity (+58.7%, +52.3%), organic carbon (+67.5%, +79.5%), N (+97.2%, +75.7%), P (+98.2%, +76.9%), K (+31.8%, +37.4%), microbial biomass carbon (+143%, +164%) and dehydrogenase activity (+228%, +262%) as compared to the unreclaimed reference coal mine site. The concentration of polycyclic aromatic hydrocarbons (PAHs) decreased significantly in the reclaimed site than the reference spoil, C. siamea was found to be more promising for PAH degradation. The overall impact of tree species on the quality of reclaimed mine spoil cannot be assessed by individual soil parameters, as most of the parameters are interlinked and difficult to interpret. However, combination of soil properties into an integrated soil quality index provides a more meaningful assessment of reclamation potential of tree species. Principal component analysis (PCA) was used to identify key mine soil quality indicators to develop a soil quality index (SQI). Coarse fraction, pH, EC, soil organic carbon, P, Ca, S, and dehydrogenase activity were the most critical properties controlling growth of tree

  2. Durability of building joint sealants

    Science.gov (United States)

    Christopher C. White; Kar Tean Tan; Donald L. Hunston; R. Sam Williams

    2009-01-01

    Predicting the service life of building joint sealants exposed to service environments in less than real time has been a need of the sealant community for many decades. Despite extensive research efforts to design laboratory accelerated tests to duplicate the failure modes occurring in field exposures, little success has been achieved using conventional durability...

  3. Solid speciation and availability of nickel and chromium in Ni mining spoils

    Science.gov (United States)

    Raous, Sophie; Garnier, Jérémie; Sterckeman, Thibaul; Echevarria, Guillaume; Becquer, Thierry; Thomas, Fabien

    2010-05-01

    Nickel mining of ultramafic laterites generates different types of wastes, topsoils and ores that are too poor in Ni to be currently processed. These are mixed and stored on heaps which could be a potential source of Ni and Cr pollution. Chemical reactivity of the main metal bearing phases present in the mining spoils of Goiás (Brasil) was investigated. Principally a silicated 'saprolite' material and a Fe-oxide rich limonitic material were isolated from the wastes. Their total Ni and Cr content are high, respectively for Ni and Cr : 7,170 and 54,970 mg kg-1 in limonite and 12,200 and 12,650 mg kg-1 in saprolite. The main metal-bearing minerals, identified and localized using XRD, TEM-EDX, Raman spectroscopy and Mossbaüer spectrometry are well-crystallized minerals: goethite (75%), hematite (13%) and chromite in limonite and ferruginous smectite, talc and chromite in saprolite. Single and sequential extractions showed that the amounts of 1M KCl exchangeable Ni and Cr reached respectively 7.1% and 0.03% of total contents in saprolite. Moreover, Cr(VI) extraction by KH2PO4 showed that more than 2% (980 mg kg-1) of total Cr was under this labile toxic form in limonite. This study allowed us to determine the main reactions controlling the Ni and Cr mobility in the spoils i.e. Ni2+ cationic exchange in saprolitic spoil and CrO32- surface complexation in limonitic spoil. This study allowed us to demonstrate the need of chemical rehabilitation of mining wastes in order to avoid the dispersion of the high contents of Ni and Cr available. It constitutes the system definition needed to predict the Cr and Ni mobility in ultramafic mining spoils.

  4. Survival and growth of wildlife shrubs and trees on acid mine spoil

    Energy Technology Data Exchange (ETDEWEB)

    Fowler, D.K.; Adkisson, L.F.

    1980-01-01

    The purpose of this study was to assess the survival and growth of selected wildlife plants over a wide range of acid mine spoil conditions and to identify species suitable for surface mine reclamation. A major criterion in selection of study sites was inclusion of a wide range of spoil acidity conditions. The Ollis Creek (Study Area A) and Farrell (Study Area B) coal surface mines located in Campbell and Scott Counties, Tennessee, were selected for study. Seven plant species, all of which had been used in past reclamation demonstrations, were introduced on the 22 plots during March 1972. Autumn olive (Elaeagnus umbellata) was included as a control plant. Ten additional plant species were introduced during March 1973. With the exception of highbush blueberry (Vaccinium corymbosum var.). European filbert (Corylus avellana), and red maple (Acer rubrum), these species had not been used in TVA reclamation demonstrations. To assess the effects of spoil pH on the plants, the plots were grouped into seven pH categories, and mean percent survival and growth for each species were calculated. Results indicate that autumn olive, elaeagnus cherry, arnot locust, sawtooth oak, red maple, and Toringo crabapple are suitable for quick improvement of surface mine habitat over a wide range of spoil acidity in the Appalachian coalfield. Bessey cherry and European filbert need further study before a decision can be made regarding their reclamation utility. Species that are not recommended for quick habitat improvement over a wide range of surface mine spoil pH conditions include bush honeysuckle, barberry, Siberian crabapple, Manchu cherry, American beautyberry, bear oak, blueberry, rem-red honeysuckle, and redcedar.

  5. Durable Goods and the Business Cycle

    OpenAIRE

    Susan Black; Tom Cusbert

    2010-01-01

    Spending on durable goods tends to be more cyclical than spending on non-durable goods and services as it can be more readily postponed in times of economic weakness. During the recent global economic slowdown, the decline in durable goods spending was a key transmission mechanism of the uncertainty associated with the global financial crisis to the broader economy, as households and businesses delayed purchases of durable goods.

  6. Geochemical assessments and classification of coal mine spoils for better understanding of potential salinity issues at closure.

    Science.gov (United States)

    Park, Jin Hee; Li, Xiaofang; Edraki, Mansour; Baumgartl, Thomas; Kirsch, Bernie

    2013-06-01

    Coal mining wastes in the form of spoils, rejects and tailings deposited on a mine lease can cause various environmental issues including contamination by toxic metals, acid mine drainage and salinity. Dissolution of salt from saline mine spoil, in particular, during rainfall events may result in local or regional dispersion of salts through leaching or in the accumulation of dissolved salts in soil pore water and inhibition of plant growth. The salinity in coal mine environments is from the geogenic salt accumulations and weathering of spoils upon surface exposure. The salts are mainly sulfates and chlorides of calcium, magnesium and sodium. The objective of the research is to investigate and assess the source and mobility of salts and trace elements in various spoil types, thereby predicting the leaching behavior of the salts and trace elements from spoils which have similar geochemical properties. X-ray diffraction analysis, total digestion, sequential extraction and column experiments were conducted to achieve the objectives. Sodium and chloride concentrations best represented salinity of the spoils, which might originate from halite. Electrical conductivity, sodium and chloride concentrations in the leachate decreased sharply with increasing leaching cycles. Leaching of trace elements was not significant in the studied area. Geochemical classification of spoil/waste defined for rehabilitation purposes was useful to predict potential salinity, which corresponded with the classification from cluster analysis based on leaching data of major elements. Certain spoil groups showed high potential salinity by releasing high sodium and chloride concentrations. Therefore, the leaching characteristics of sites having saline susceptible spoils require monitoring, and suitable remediation technologies have to be applied.

  7. Durability of fibre reinforced concrete structures

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place; Hansen, Kurt Kielsgaard

    1996-01-01

    The planned research will indicate, whether fibre reinforced concrete has better or worse durability than normal concrete. Durability specimens will be measured on cracked as well as uncracked specimens. Also the pore structure in the concrete will be characterized.Keywords: Fibre reinforced...... concrete, durability, pore structure, mechanical load...

  8. Durability of building materials and components

    CERN Document Server

    Delgado, JMPQ

    2013-01-01

    Durability of Building Materials and Components provides a collection of recent research works to contribute to the systematization and dissemination of knowledge related to the long-term performance and durability of construction and, simultaneously, to show the most recent advances in this domain. It includes a set of new developments in the field of durability, service life prediction methodologies, the durability approach for historical and old buildings, asset and maintenance management and on the durability of materials, systems and components. The book is divided in several chapters that intend to be a resume of the current state of knowledge for benefit of professional colleagues.

  9. Source rock

    Directory of Open Access Journals (Sweden)

    Abubakr F. Makky

    2014-03-01

    Full Text Available West Beni Suef Concession is located at the western part of Beni Suef Basin which is a relatively under-explored basin and lies about 150 km south of Cairo. The major goal of this study is to evaluate the source rock by using different techniques as Rock-Eval pyrolysis, Vitrinite reflectance (%Ro, and well log data of some Cretaceous sequences including Abu Roash (E, F and G members, Kharita and Betty formations. The BasinMod 1D program is used in this study to construct the burial history and calculate the levels of thermal maturity of the Fayoum-1X well based on calibration of measured %Ro and Tmax against calculated %Ro model. The calculated Total Organic Carbon (TOC content from well log data compared with the measured TOC from the Rock-Eval pyrolysis in Fayoum-1X well is shown to match against the shale source rock but gives high values against the limestone source rock. For that, a new model is derived from well log data to calculate accurately the TOC content against the limestone source rock in the study area. The organic matter existing in Abu Roash (F member is fair to excellent and capable of generating a significant amount of hydrocarbons (oil prone produced from (mixed type I/II kerogen. The generation potential of kerogen in Abu Roash (E and G members and Betty formations is ranging from poor to fair, and generating hydrocarbons of oil and gas prone (mixed type II/III kerogen. Eventually, kerogen (type III of Kharita Formation has poor to very good generation potential and mainly produces gas. Thermal maturation of the measured %Ro, calculated %Ro model, Tmax and Production index (PI indicates that Abu Roash (F member exciting in the onset of oil generation, whereas Abu Roash (E and G members, Kharita and Betty formations entered the peak of oil generation.

  10. Rocking pneumonia.

    Science.gov (United States)

    Rijkers, Ger T; Rodriguez Gomez, Maria

    2017-01-01

    Ever since Chuck Berry coined the term "rocking pneumonia" in his 1956 song "Roll over Beethoven", pneumonia has been mentioned frequently in modern blues and rock songs. We analyzed the lyrics of these songs to examine how various elements of pneumonia have been represented in popular music, specifically the cause of pneumonia, the risk groups, comorbidity (such as the boogie woogie flu), the clinical symptoms, and treatment and outcome. Up to this day, songwriters suggest that pneumonia is caused mainly by the cold and rain and that treatment is hardly possible, aside from a shot of rhythm and blues.

  11. Remedial investigation report on Bear Creek Valley Operable Unit 2 (rust spoil area, spoil area 1, and SY-200 yard) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. Volume 2. Appendixes

    International Nuclear Information System (INIS)

    1994-08-01

    This document contains the appendices to the Remedial Investigation Report on Bear Creek Valley Operable Unit 2 (Rust Spoil Area, Spoil Area 1, and SY-200 Yard) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. The appendices include Current and historical soil boring and groundwater monitoring well information, well construction logs, and field change orders; Analytical data; Human health risk assessment data; and Data quality

  12. Weathering processes under various moisture conditions in a lignite mine spoil from As Pontes (N.W. Spain)

    International Nuclear Information System (INIS)

    Seoane, S.; Leiros, M.C.

    1997-01-01

    Processes contributing to acid release/consumption during weathering of a lignite mine spoil (2.3% w/w S as sulfides) from As Pontes (N.W. Spain) were studied under three moisture conditions (at field capacity or under alternate wetting-drying or forced percolation), which were simulated in laboratory experiments. Oxidation of sulfides to sulfates was favoured under all three moisture conditions, releasing most acid in spoil kept at field capacity. Hydroxysulfates formed in spoil kept at field capacity or under alternate wetting-drying conditions, thereby contributing to acid release. Acid consumption by dissolution of clay minerals, especially micas, was favoured under all three moisture conditions, but was particularly intense in spoil at field capacity. Dissolution of aluminium oxides was also favoured under all the moisture conditions studied. 27 refs., 8 figs., 6 tabs

  13. Intellektuaalne rock

    Index Scriptorium Estoniae

    2007-01-01

    Briti laulja-helilooja ja näitleja Toyah Willcox ning Bill Rieflin ansamblist R.E.M. ja Pat Mastelotto King Krimsonist esinevad koos ansamblitega The Humans ja Tuner 25. okt. Tallinnas Rock Cafés ja 27. okt Tartu Jaani kirikus

  14. The copper spoil heap Knappenberg, Austria, as a model for metal habitats – Vegetation, substrate and contamination

    Energy Technology Data Exchange (ETDEWEB)

    Adlassnig, Wolfram; Weiss, Yasmin S. [University of Vienna, Core Facility Cell Imaging and Ultrastructure Research, Althanstraße 14, A-1090 Vienna (Austria); Sassmann, Stefan [University of Vienna, Core Facility Cell Imaging and Ultrastructure Research, Althanstraße 14, A-1090 Vienna (Austria); University of Exeter, College of Life and Environmental Sciences, Biosciences, Stocker Road, Exeter EX4 4QD (United Kingdom); Steinhauser, Georg [Leibniz University Hannover, Institute of Radioecology and Radiation Protection, Herrenhäuser Straße 2, D30419 Hannover (Germany); Hofhansl, Florian [University of Vienna, Department of Microbiology and Ecosystem Science, Althanstraße 14, A-1090 Vienna (Austria); Instituto Nacional de Pesquisas da Amazônia, Coordenação de Dinâmica Ambiental, Manaus (Brazil); Baumann, Nils [Helmholtz-Zentrum Dresden-Rossendorf, Division of Biogeochemistry, Bautzner Landstraße 400, D-01328 Dresden (Germany); Lichtscheidl, Irene K. [University of Vienna, Core Facility Cell Imaging and Ultrastructure Research, Althanstraße 14, A-1090 Vienna (Austria); Lang, Ingeborg, E-mail: ingeborg.lang@univie.ac.at [University of Vienna, Core Facility Cell Imaging and Ultrastructure Research, Althanstraße 14, A-1090 Vienna (Austria)

    2016-09-01

    Historic mining in the Eastern Alps has left us with a legacy of numerous spoil heaps hosting specific, metal tolerant vegetation. Such habitats are characterized by elevated concentrations of toxic elements but also by high irradiation, a poorly developed substrate or extreme pH of the soil. This study investigates the distribution of vascular plants, mosses and lichens on a copper spoil heap on the ore bearing Knappenberg formed by Prebichl Layers and Werfener Schist in Lower Austria. It serves as a model for discriminating between various ecological traits and their effects on vegetation. Five distinct clusters were distinguished: (1) The bare, metal rich Central Spoil Heap was only colonised by highly resistant specialists. (2) The Northern and (3) Southern Peripheries contained less copper; the contrasting vegetation was best explained by the different microclimate. (4) A forest over acidic bedrock hosted a vegetation overlapping with the periphery of the spoil heap. (5) A forest over calcareous bedrock was similar to the spoil heap with regard to pH and humus content but hosted a vegetation differing strongly to all other habitats. Among the multiple toxic elements at the spoil heap, only Cu seems to exert a crucial influence on the vegetation pattern. Besides metal concentrations, irradiation, humidity, humus, pH and grain size distribution are important for the establishment of a metal tolerant vegetation. The difference between the species poor Northern and the diverse Southern Periphery can be explained by the microclimate rather than by the substrate. All plant species penetrating from the forest into the periphery of the spoil heap originate from the acidic but not from the calcareous bedrock. - Highlights: • Strong impact on plant diversity by isolation and extreme abiotic conditions • Both, microclimate and substrate explain species distribution. • Increased cellular metal tolerance of plants from the Central Spoil Heap • Among toxic elements

  15. Chemical properties and particle-size distribution of 39 surface-mine spoils in southern West Virginia

    Science.gov (United States)

    William T. Plass; Willis G. Vogel

    1973-01-01

    A survey of 39 surface-mine sites in southern West Virginia showed that most of the spoils from current mining operations had a pH of 5.0 or higher. Soil-size material averaged 37 percent of the weight of the spoils sampled. A major problem for the establishment of vegetation was a deficiency of nitrogen and phosphorus. This can be corrected with additions of...

  16. Igneous Rocks

    Science.gov (United States)

    Doe, Bruce R.

    “Igneous Rocks was written for undergraduate geology majors who have had a year of college-level chemistry and a course in mineralogy … and for beginning graduate students. Geologists working in industry, government, or academia should find this text useful as a guide to the technical literature up to 1981 and as an overview of topics with which they have not worked but which may have unanticipated pertinence to their own projects.” So starts the preface to this textbook.As one who works part time in research on igneous rocks, especially as they relate to mineral deposits, I have been looking for such a book with this avowed purpose in a field that has a choking richness of evolving terminology and a bewildering volume of interdisciplinary literature. In addition to the standard topics of igneous petrology, the book contains a chapter on the role of igneous activity in the genesis of mineral deposits, its value to geothermal energy, and the potential of igneous rocks as an environment for nuclear waste disposal. These topics are presented rather apologetically in the preface, but the author is to be applauded for including this chapter. The apology shows just how new these interests are to petrology. Recognition is finally coming that, for example, mineral deposits are not “sports of nature,” a view held even by many economic geologists as recently as the early 1960's; instead they are perfectly ordinary geochemical features formed by perfectly ordinary geologic processes. In fact, the mineral deposits and their attendant alteration zones probably have as much to tell us about igneous rocks as the igneous rocks have to tell us about mineral deposits.

  17. Reduction of Flow Artifacts by Using Partial Saturation in RF-Spoiled Gradient-Echo Imaging

    OpenAIRE

    Han, Misung; Hargreaves, Brian A.

    2011-01-01

    Radiofrequency (RF)-spoiled gradient-echo imaging provides a signal intensity close to pure T1 contrast by using spoiler gradients and RF phase cycling to eliminate net transverse magnetization. Generally, spins require many RF excitations to reach a steady-state magnetization level; therefore, when unsaturated flowing spins enter the imaging slab, they can cause undesirable signal enhancement and generate image artifacts. These artifacts can be reduced by partially saturating an outer slab u...

  18. Heavy metals in soil on spoil heap of an abandoned lead ore ...

    African Journals Online (AJOL)

    EJIRO

    Total concentrations of 4 heavy metals (Pb, Zn, Cu, and Mn), non-metal As and three reference elements. (Ti, Fe and Al) of a soil profile on spoil heap were examined. 54 soil samples were collected in the soil profile at different depths: 15 to 45, 45 to 75, 75 to 105, 105 to 135 and 135 to 150 cm. The first 15 cm of top layer ...

  19. The development of arbuscular mycorrhiza in two simulated stages of spoil-bank succession

    Czech Academy of Sciences Publication Activity Database

    Püschel, David; Rydlová, Jana; Vosátka, Miroslav

    2007-01-01

    Roč. 35, č. 2 (2007), s. 363-369 ISSN 0929-1393 R&D Projects: GA ČR GA526/04/0996; GA ČR(CZ) GD206/03/H137 Institutional research plan: CEZ:AV0Z60050516 Keywords : mycorrhiza * plant succession * spoil bank s Subject RIV: EF - Botanics Impact factor: 1.810, year: 2007

  20. Development of Soil Characteristics and Plant Communities On Reclaimed and Unreclaimed Spoil Heaps After Coal Mining

    Science.gov (United States)

    Cudlín, Ondřej; Řehák, Zdeněk; Cudlín, Pavel

    2016-10-01

    The aim of this study was to compare soil characteristics, plant communities and the rate of selected ecosystem function performance on reclaimed and unreclaimed plots (left for spontaneous succession) of different age on spoil heaps. Twelve spoil heaps (three circle plots of radius 12.5 m) near the town Kladno in north-west direction from Prague, created after deep coal mining, were compared. Five mixed soil samples from organo-mineral horizons in each plot were analysed for total content of carbon, nitrogen and phosphorus. In addition, active soil pH (pHH2O) was determined. Plant diversity was determined by vegetation releves. The biodiversity value of the habitat according to the Habitat Valuation Method was assessed and the rate of evapotranspiration function by the Method of Valuation Functions and Services of Ecosystems in the Czech Republic were determined. The higher organo-mineral layers and higher amount of total nitrogen content were found on the older reclaimed and unreclaimed plots than in younger plots. The number of plant species and the total contents of carbon and nitrogen were significantly higher at the unreclaimed plots compared to reclaimed plots. The biodiversity values and evapotranspiration function rate were also higher on unreclaimed plots. From this perspective, it is possible to recommend using of spontaneous succession, together with routine reclamation methods to restore habitats after coal mining. Despite the relatively high age of vegetation in some of selected plots (90 years), both the reclaimed and unreclaimed plots have not reached the stage of potential vegetation near to natural climax. Slow development of vegetation was probably due to unsuitable substrate of spoil heaps and a lack of plant and tree species of natural forest habitats in this area. However, it is probable that vegetation communities on observed spoil heaps in both type of management (reclaimed and unreclaimed) will achieve the stage of natural climax and they

  1. Bottom fauna of dredging and dredge spoil disposal sites of a tropical estuary

    Digital Repository Service at National Institute of Oceanography (India)

    Sheeba, P.; Jayalakshmy, K.V.; Devi, S.K.

    gathered at a single point in time. These studies are valuable even though they give only very little insight into the biotic constraints which are highly important in the dynamic processes which establish the real niches of animals. Niche concept.... 1967. Environmental effects of dredging and spoil deposition. Proceedings of WODCOM, World Dredging Conference (Palos Verdes Estates, California): 353-359. Heip, C. 1974. A new index measuring evenness. Journal of the Marine Biology Association (UK...

  2. Remediation of Acid Generating Colliery Spoil Using Steel Slag – Case Studies

    Directory of Open Access Journals (Sweden)

    Ghataora Gurmel S.

    2015-06-01

    Full Text Available One of the legacies of the coal mining industry is the existence of numerous colliery spoil mounds. Run-off waters from some of these mounds result in oxidation of sulphur compounds causing pH to drop to perhaps as low as 2.5. At this pH, mobility for metals increases and it results in destruction of both flora and fauna. In order to reduce acidity, a number of solutions have been investigated with varying degree of success. A recent study to reduce acidity in spoil run-off water included the use of Basic Oxygen Steel slag. Its slow release of lime resulted in longer term remediation compared with other techniques. In addition to this, steel slag contains elements which are essential for plant growth and can be regarded as a weak fertiliser. This was substantiated in two field trials, which had the aim of not only remediating acidity from two different types of colliery spoils, but also to develop a composition that supports grass growth. The objectives were achieved at both sites and some of the results of over 5000 chemical tests conducted during these studies are reported in this paper.

  3. Remediation of Acid Generating Colliery Spoil Using Steel Slag - Case Studies

    Science.gov (United States)

    Ghataora, Gurmel S.; Ghazireh, Nizar; Hall, Nigel

    2015-06-01

    One of the legacies of the coal mining industry is the existence of numerous colliery spoil mounds. Run-off waters from some of these mounds result in oxidation of sulphur compounds causing pH to drop to perhaps as low as 2.5. At this pH, mobility for metals increases and it results in destruction of both flora and fauna. In order to reduce acidity, a number of solutions have been investigated with varying degree of success. A recent study to reduce acidity in spoil run-off water included the use of Basic Oxygen Steel slag. Its slow release of lime resulted in longer term remediation compared with other techniques. In addition to this, steel slag contains elements which are essential for plant growth and can be regarded as a weak fertiliser. This was substantiated in two field trials, which had the aim of not only remediating acidity from two different types of colliery spoils, but also to develop a composition that supports grass growth. The objectives were achieved at both sites and some of the results of over 5000 chemical tests conducted during these studies are reported in this paper.

  4. Impact of plantation on ecosystem development in disturbed coal mine overburden spoils

    Energy Technology Data Exchange (ETDEWEB)

    Banerjee, S.K.; Mishra, T.K.; Singh, A.K.; Jain, A. [Tropical Forest Research Inst., Jabalpur (India)

    2004-07-15

    Eleven nitrogen fixing and one non-nitrogen fixing tree species were planted in coal mine overburden spoils of Bisrampur colliery at Surguja district, Chattisgarh, India in 1993. Their growth performance at one, two, four, six and eight years was recorded. It was observed that after eight years of planting, Acacia mangium performed very well in respect to all the growth parameters followed by A. holoserecia, Dalbergia sissoo, Albiziaprocera, Pithecellobium dulce, Acacia auriculiformis and Gmelina arborea. Acacia nilotica showed very poor performance. The number of natural colonisers increased with increasing age of the planted species. Nutrient status of the spoils also increased gradually with the increase in age of the plants. Organic carbon increased greatly and, as a result, activities of bacteria, actinomycetes and fungi accelerated. This study indicated that the spoil environment, which is extremely harsh just after mining, could be improved gradually and the ecosystem restored by planting suitable species. Therefore, for early development of the ecosystem, afforestation with suitable leguminous species is recommended.

  5. Magnetization spoiling in radial FLASH contrast-enhanced MR digital subtraction angiography.

    Science.gov (United States)

    Vakil, Parmede; Ansari, Sameer A; Hurley, Michael C; Bhat, Himanshu; Batjer, H Hunt; Bendok, Bernard R; Eddleman, Christopher S; Carroll, Timothy J

    2012-07-01

    To increase the in-plane spatial resolution and image update rates of 2D magnetic resonance (MR) digital subtraction angiography (DSA) pulse sequences to 0.57 × 0.57 mm and 6 frames/sec, respectively, for intracranial vascular disease applications by developing a radial FLASH protocol and to characterize a new artifact, not previously described in the literature, which arises in the presence of such pulse sequences. The pulse sequence was optimized and artifacts were characterized using simulation and phantom studies. With Institutional Review Board (IRB) approval, the pulse sequence was used to acquire time-resolved images from healthy human volunteers and patients with x-ray DSA-confirmed intracranial vascular disease. Artifacts were shown to derive from inhomogeneous spoiling due to the nature of radial waveforms. Gradient spoiling strategies were proposed to eliminate the observed artifact by balancing gradient moments across TR intervals. The resulting radial 2D MR DSA sequence (2.6 sec temporal footprint, 6 frames/sec with sliding window factor 16, 0.57 × 0.57 mm in-plane) demonstrated small vessel detail and corroborated x-ray DSA findings in intracranial vascular imaging studies. Appropriate gradient spoiling in radial 2D MR DSA pulse sequences improves intracranial vascular depiction by eliminating circular banding artifacts. The proposed pulse sequence may provide a useful addition to clinically applied 2D MR DSA scans. Copyright © 2012 Wiley Periodicals, Inc.

  6. White Rock

    Science.gov (United States)

    2005-01-01

    14 November 2005 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a portion of the famous 'White Rock' feature in Pollack Crater in the Sinus Sabaeus region of Mars. The light-toned rock is not really white, but its light tone caught the eye of Mars geologists as far back as 1972, when it was first spotted in images acquired by Mariner 9. The light-toned materials are probably the remains of a suite of layered sediments that once spread completely across the interior of Pollack Crater. Dark materials in this image include sand dunes and large ripples. Location near: 8.1oS, 335.1oW Image width: width: 3 km (1.9 mi) Illumination from: lower left Season: Southern Summer

  7. Estimating Durability of Reinforced Concrete

    Science.gov (United States)

    Varlamov, A. A.; Shapovalov, E. L.; Gavrilov, V. B.

    2017-11-01

    In this article we propose to use the methods of fracture mechanics to evaluate concrete durability. To evaluate concrete crack resistance characteristics of concrete directly in the structure in order to implement the methods of fracture mechanics, we have developed special methods. Various experimental studies have been carried out to determine the crack resistance characteristics and the concrete modulus of elasticity during its operating. A comparison was carried out for the results obtained with the use of the proposed methods and those obtained with the standard methods for determining the concrete crack resistance characteristics.

  8. Durability Improvements Through Degradation Mechanism Studies

    Energy Technology Data Exchange (ETDEWEB)

    Borup, Rodney L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mukundan, Rangachary [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Spernjak, Dusan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Baker, Andrew M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lujan, Roger W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Langlois, David Alan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ahluwalia, Rajesh [Argonne National Lab. (ANL), Argonne, IL (United States); Papadia, D. D. [Argonne National Lab. (ANL), Argonne, IL (United States); Weber, Adam Z. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kusoglu, Ahmet [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Shi, Shouwnen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); More, K. L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Grot, Steve [Ion Power, New Castle, DE (United States)

    2015-08-03

    The durability of polymer electrolyte membrane (PEM) fuel cells is a major barrier to the commercialization of these systems for stationary and transportation power applications. By investigating cell component degradation modes and defining the fundamental degradation mechanisms of components and component interactions, new materials can be designed to improve durability. To achieve a deeper understanding of PEM fuel cell durability and component degradation mechanisms, we utilize a multi-institutional and multi-disciplinary team with significant experience investigating these phenomena.

  9. Hygrothermal Behavior, Building Pathology and Durability

    CERN Document Server

    Delgado, JMPQ

    2013-01-01

    The main purpose of this book, Hygrothermal, Building Pathology and Durability, is to provide a collection of recent research works to contribute to the systematization and dissemination of knowledge related to construction pathology, hygrothermal behaviour of buildings, durability and diagnostic techniques and, simultaneously, to show the most recent advances in this domain. It includes a set of new developments in the field of building physics and hygrothermal behaviour, durability approach for historical and old buildings and building pathology vs. durability. The book is divided in several chapters that are a resume of the current state of knowledge for benefit of professional colleagues, scientists, students, practitioners, lecturers and other interested parties to network.

  10. Effects of coal spoil amendment on heavy metal accumulation and physiological aspects of ryegrass (Lolium perenne L.) growing in copper mine tailings.

    Science.gov (United States)

    Chu, Zhaoxia; Wang, Xingming; Wang, Yunmin; Liu, Guijian; Dong, Zhongbing; Lu, Xianwen; Chen, Guangzhou; Zha, Fugeng

    2017-12-21

    Copper mine tailings pose many threats to the surrounding environment and human health, and thus, their remediation is fundamental. Coal spoil is the waste by-product of coal mining and characterized by low levels of metals, high content of organic matter, and many essential microelements. This study was designed to evaluate the role of coal spoil on heavy uptake and physiological responses of Lolium perenne L. grown in copper mine tailings amended with coal spoil at rates of 0, 0.5, 1, 5, 10, and 20%. The results showed that applying coal spoil to copper mine tailings decreased the diethylenetriaminepentaacetic acid (DTPA)-extractable Cd, Cu, Pb, and Zn contents in tailings and reduced those metal contents in both roots and shoots of the plant. However, application of coal spoil increased the DTPA-extractable Cr concentration in tailings and also increased Cr uptake and accumulation by Lolium perenne L. The statistical analysis of physiological parameters indicated that chlorophyll and carotenoid increased at the lower amendments of coal spoil followed by a decrease compared to their respective controls. Protein content was enhanced at all the coal spoil amendments. When treated with coal spoil, the activities of superoxide dismutases (SOD), peroxidase (POD), and catalase (CAT) responded differently. CAT activity was inhibited, but POD activity was increased with increasing amendment ratio of coal spoil. SOD activity increased up to 1% coal spoil followed by a decrease. Overall, the addition of coal spoil decreased the oxidative stress in Lolium perenne L., reflected by the reduction in malondialdehyde (MDA) contents in the plant. It is concluded that coal spoil has the potential to stabilize most metals studied in copper mine tailings and ameliorate the harmful effects in Lolium perenne L. through changing the physiological attributes of the plant grown in copper mine tailings.

  11. Experimental Study on Durability Improvement of Fly Ash Concrete with Durability Improving Admixture

    OpenAIRE

    Quan, Hong-zhu; Kasami, Hideo

    2014-01-01

    In order to improve the durability of fly ash concrete, a series of experimental studies are carried out, where durability improving admixture is used to reduce drying shrinkage and improve freezing-thawing resistance. The effects of durability improving admixture, air content, water-binder ratio, and fly ash replacement ratio on the performance of fly ash concrete are discussed in this paper. The results show that by using durability improving admixture in nonair-entraining fly ash concrete,...

  12. Durability of Self Compacting Concrete

    International Nuclear Information System (INIS)

    Benmarce, A.; Boudjehem, H.; Bendjhaiche, R.

    2011-01-01

    Self compacting concrete (SCC) seem to be a very promising materials for construction thanks to their properties in a fresh state. Studying of the influence of the parameters of specific designed mixes to their mechanical, physical and chemical characteristics in a state hardened is an important stage so that it can be useful for new-to-the-field researchers and designers (worldwide) beginning studies and work involving self compacting concrete. The objective of this research is to study the durability of self compacting concrete. The durability of concrete depends very much on the porosity; the latter determines the intensity of interactions with aggressive agents. The pores inside of concrete facilitate the process of damage, which began generally on the surface. We are interested to measure the porosity of concrete on five SCC with different compositions (w/c, additives) and vibrated concrete to highlight the influence of the latter on the porosity, thereafter on the compressive strength and the transfer properties (oxygen permeability, chloride ion diffusion, capillary absorption). (author)

  13. Edaphic restoration of the spoil banks of lignite mines in Galicia. Recuperacion edafica de los escombreras de minas de lignito en Galicia. Caracterizacion de los materiales esteriles

    Energy Technology Data Exchange (ETDEWEB)

    Leiros de la Pena, M.C.; Gil Sotres, F.; Carballas Fernandez, M.; Codesido Lopez, C.; Gonzalez Sangregorio, M.V.; Seoane Lavandeira, S.; Guitian Ojea, F. (Univ. of Santiago, La Coruna (Spain). Fac. Farm., Lab. Edafol.)

    1989-01-01

    We report physical, chemical and mineralogical properties of four lignite spoils from the mines at Meirama and As Pontes (La Coruna, NW Spain). The low acidity, zero pyrite content and balanced texture of the Meirama spoils suggest that their recovery as viable soil will not be difficult, whereas recovery of the As Pontes spoils (P1 and P2) is hindered by their low pH, high total acidity and the presence of pyrites. The greatest contribution to total acidity is the residual fraction in P1 and the soluble and exchange fractions in P2. Different recovery strategies should be used for these two spoils. 2 figs., 10 tabs., 20 refs.

  14. Harshest environment proves BDY2 durability

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2009-01-15

    Extremely robust tires are needed in the Canadian oil patch to deliver the required traction, durability and reliability. The tire hazards include sharp rocks that may literally tear the sidewalls out of tires, chains that inflict damage on the tread design, and 165,000 pound gross vehicle weight loads maneuvering steep hills. F.S.J. L.A.N.D. Transport is a member of the Mullen Transportation Group, and is an oil field hauler located in Fort St. John, British Columbia. Its core business is the movement of drilling rigs in British Columbia, Alberta, and the Northwest Territories. This article discussed L.A.N.D.'s fleet which includes 37 tractors and 50 trailers and the retreading of tires. Kal Tire in Fort St. John has been L.A.N.D.'s tire supplier since 1994. A retreading tire program has been created that includes a continuous improvement effort. The introduction of the BDY2 tread design provided the L.A.N.D. fleet with a number of major features and benefits to enhance their tire program. Since nearly 40 per cent of the fleet's travel is off-road, chains are required for ice and snow from November through March. Mud chains are also required from March until November. The BDY2 offers several solutions to some previous chaining-up challenges. For example, it is easier to apply the chains to the BDY2 tires, and the BDY2 can outperform any new tire or retread design in the fleet. 1 ref., 3 figs.

  15. Thermal Inertia of Rocks and Rock Populations

    Science.gov (United States)

    Golombek, M. P.; Jakosky, B. M.; Mellon, M. T.

    2001-01-01

    The effective thermal inertia of rock populations on Mars and Earth is derived from a model of effective inertia versus rock diameter. Results allow a parameterization of the effective rock inertia versus rock abundance and bulk and fine component inertia. Additional information is contained in the original extended abstract.

  16. Durable Solutions for Developing Country Refugees.

    Science.gov (United States)

    Stein, Barry N.

    1986-01-01

    There are only three durable solutions to the refugee problem--voluntary repatriation, local settlement, and third-country resettlement--and all depend on political will, diplomacy, and statesmanship. It is important to remember, however, that humanitarian concerns must outweigh costs consciousness when durable solutions are sought. (Author/GC)

  17. Hygrothermal behavior, building pathology and durability

    Energy Technology Data Exchange (ETDEWEB)

    Peixoto de Freitas V.; Delgado, J.M.P.Q. (eds.) [Porto Univ. (Portugal). Building Physics Lab.

    2013-03-01

    Includes a set of new developments in the field of building physics and hygrothermal behavior. Presents a new durability approach for historical and old buildings. Reviews the current state of knowledge. The main purpose of this book, Hygrothermal, Building Pathology and Durability, is to provide a collection of recent research works to contribute to the systematization and dissemination of knowledge related to construction pathology, hygrothermal behaviour of buildings, durability and diagnostic techniques and, simultaneously, to show the most recent advances in this domain. It includes a set of new developments in the field of building physics and hygrothermal behaviour, durability approach for historical and old buildings and building pathology vs. durability. The book is divided in several chapters that are a resume of the current state of knowledge for benefit of professional colleagues, scientists, students, practitioners, lecturers and other interested parties to network.

  18. Spatial variation in spoil and vegetative characteristics of pastures on reclaimed surface mined land

    International Nuclear Information System (INIS)

    Teutsch, C.D.; Collins, M.; Ditsch, D.C.

    1999-01-01

    Kentucky has large areas of reclaimed surface mined land that could provide grazing for livestock. Research is needed to determine optimal stocking densities and to evaluate the sustainability of such grazing systems for this region. A long-term grazing study was initiated in 1997 on 151 ha of reclaimed land near Chavies, KY to determine spatial and temporal variation with stocking densities of 0, 0.28, 0.42, or 0.83 beef cow-calf units/ha. Global Positioning System and GIS technologies were used to establish pasture boundaries, locate permanent sampling markers at a density of 1 per 0.4 ha, and interpolate maps of physical, spoil, and vegetable pasture characteristics. Herbage and spoil samples were collected around the permanent markers in May of 1997. Stepwise regression was used to determine factors affecting the vegetative characteristics of the sites. Biomass density ranged from 0 to 2500 kg/ha with a mean of 570 kg/ha. Factors affecting biomass included legume and weed proportions in the sward, grazing activity, soil potassium, elevation, and potential acidity, cumulatively accounting for 32% of the variation. Ground cover ranged from 10 to 100% with an average of 74%. Soil pH, potassium, and grass in the sward accounted for 14% of the variation in ground cover. Legumes made up 0 to 61% of the sward with a mean of 13% over the pasture area. Variables affecting the amount of legume in the sward included biomass density, slope, elevation, pH, and stocking density, together accounting for 21% of the variation. Spatial variation in the physical, spoil, and vegetative characteristics of the pastures was large. Overall, regression accounted for a limited amount of the variation in the vegetative characteristics of the site indicating that other important variables exist

  19. Ecological study of revegetated coal mine spoil of an Indian dry tropical ecosystem along an age gradient.

    Science.gov (United States)

    Singh, R S; Tripathi, N; Chaulya, S K

    2012-11-01

    Mineral nitrogen (MN), belowground (root) biomass (BGB), soil nitrogen (N) mineralization (NM), microbial biomass N (MBN) and mine dump stability of a revegetated mine spoil were studied after 2, 6, 10 and 12 years of re-vegetation on coal mine spoil site. MN in revegetated mine spoil ranged from 7.4 to 11.6 kg ha(-1), NM from 38.4 to 252 kg ha(-1) year(-1), MBN from 86 to 426 kg ha(-1), and BGB from 380 to 3,750 kg ha(-1). Mining caused decline of physico-chemical characteristics of soil like MN by 46 %, N-mineralization by 92 %, MBN values by 91 %, respectively compared to forest ecosystems and reduction of total plant biomass (above ground and below ground). Revegetation of mine spoil caused increase in MN values by 12, 36 and 76 %, BGB values by 380, 1770 and 3750 times, NM values by 0.6, 3.58 and 9.5 times and MBN values by 0.43, 2.77, and 6.07 times in 2, 6 and 12 years, respectively. BGB was highly correlated with MN and MBN. Clay content was positively correlated to MN, NM, and the age of revegetation (P < 0.01). Numerical modelling indicated that revegetation increased the dump slope stability with a factor of safety from 1.2 to 1.4, 1.7, 1.9 and 2.1 after 2, 6, 10 and 12 years, respectively. Thus, long-term revegetation was found to enhance the dump stability and the soil fertility status in mine spoil, where plant biomass and microbial biomass provide major contributions in ecological redevelopment of the mine spoil.

  20. Highly Dispersed Alloy Catalyst for Durability

    Energy Technology Data Exchange (ETDEWEB)

    Murthi, Vivek S.; Izzo, Elise; Bi, Wu; Guerrero, Sandra; Protsailo, Lesia

    2013-01-08

    Achieving DOE's stated 5000-hr durability goal for light-duty vehicles by 2015 will require MEAs with characteristics that are beyond the current state of the art. Significant effort was placed on developing advanced durable cathode catalysts to arrive at the best possible electrode for high performance and durability, as well as developing manufacturing processes that yield significant cost benefit. Accordingly, the overall goal of this project was to develop and construct advanced MEAs that will improve performance and durability while reducing the cost of PEMFC stacks. The project, led by UTC Power, focused on developing new catalysts/supports and integrating them with existing materials (membranes and gas diffusion layers (GDLs)) using state-of-the-art fabrication methods capable of meeting the durability requirements essential for automotive applications. Specifically, the project work aimed to lower platinum group metals (PGM) loading while increasing performance and durability. Appropriate catalysts and MEA configuration were down-selected that protects the membrane, and the layers were tailored to optimize the movements of reactants and product water through the cell to maximize performance while maintaining durability.

  1. Integrated durability process in product development

    International Nuclear Information System (INIS)

    Pompetzki, M.; Saadetian, H.

    2002-01-01

    This presentation describes the integrated durability process in product development. Each of the major components of the integrated process are described along with a number of examples of how integrated durability assessment has been used in the ground vehicle industry. The durability process starts with the acquisition of loading information, either physically through loads measurement or virtually through multibody dynamics. The loading information is then processed and characterized for further analysis. Durability assessment was historically test based and completed through field or laboratory evaluation. Today, it is common that both the test and CAE environments are used together in durability assessment. Test based durability assessment is used for final design sign-off but is also critically important for correlating CAE models, in order to investigate design alternatives. There is also a major initiative today to integrate the individual components into a process, by linking applications and providing a framework to communicate information as well as manage all the data involved in the entire process. Although a single process is presented, the details of the process can vary significantly for different products and applications. Recent applications that highlight different parts of the durability process are given. As well as an example of how integration of software tools between different disciplines (MBD, FE and fatigue) not only simplifies the process, but also significantly improves it. (author)

  2. Acidification - neutralization processes in a lignite mine spoil amended with fly ash or limestone

    Energy Technology Data Exchange (ETDEWEB)

    Seoane, S.; Leiros, M.C. [Universidad de Santiago de Compostela, Santiago de Compostela (Spain). Dept. de Edafologia y Quimica Agricola

    2001-08-01

    A laboratory experiment was conducted to investigate the long-term effects of amending sulfide-rich lignite mine spoil with fly ash (originating from a coal-fired power station and largely comprised of aluminosilicates) and/or agricultural limestone. The experiment was carried out with soil moisture maintained at field capacity or alternate cycles of wetting and drying. Results obtained suggest that the principal acidification processes were oxidation of sulfide and formation of hydroxysulfate (FeOHSO{sub 4}), whereas the main neutralization processes were weathering of aluminosilicates in fly ash-treated samples. The highest dose of limestone rapidly raised the pH of the spoil, but this increase was not maintained throughout the one-year experiment. In contrast, fly ash-treated samples showed a more sustained increase in pH, attributable to the gradual weathering of aluminosilicates. The best results (i.e., good short- and long-term neutralization) were obtained in samples treated with both fly ash and limestone. The low liming capacity of the fly ash (47.85 cmol kg{sup -1}) means that it must be used in large quantities, an advantage in achieving the further aim of disposing of the fly ash. 33 refs., 5 figs., 4 tabs.

  3. Reduction of flow artifacts by using partial saturation in RF-spoiled gradient-echo imaging.

    Science.gov (United States)

    Han, Misung; Hargreaves, Brian A

    2011-05-01

    Radiofrequency (RF)-spoiled gradient-echo imaging provides a signal intensity close to pure T(1) contrast by using spoiler gradients and RF phase cycling to eliminate net transverse magnetization. Generally, spins require many RF excitations to reach a steady-state magnetization level; therefore, when unsaturated flowing spins enter the imaging slab, they can cause undesirable signal enhancement and generate image artifacts. These artifacts can be reduced by partially saturating an outer slab upstream to drive the longitudinal magnetization close to the steady state, while the partially saturated spins generate no signal until they enter the imaging slab. In this work, magnetization evolution of flowing spins in RF-spoiled gradient-echo sequences with and without partial saturation was simulated using the Bloch equations. Next, the simulations were validated by phantom and in vivo experiments. For phantom experiments, a pulsatile flow phantom was used to test partial saturation for a range of flip angles and relaxation times. For in vivo experiments, the technique was used to image the carotid arteries, abdominal aorta, and femoral arteries of normal volunteers. All experiments demonstrated that partial saturation can provide consistent T(1) contrast across the slab while reducing inflow artifacts. Copyright © 2011 Wiley-Liss, Inc.

  4. CERN Rocks

    CERN Document Server

    2004-01-01

    The 15th CERN Hardronic Festival took place on 17 July on the terrace of Rest 3 (Prévessin). Over 1000 people, from CERN and other International Organizations, came to enjoy the warm summer night, and to watch the best of the World's High Energy music. Jazz, rock, pop, country, metal, blues, funk and punk blasted out from 9 bands from the CERN Musiclub and Jazz club, alternating on two stages in a non-stop show.  The night reached its hottest point when The Canettes Blues Band got everybody dancing to sixties R&B tunes (pictured). Meanwhile, the bars and food vans were working at full capacity, under the expert management of the CERN Softball club, who were at the same time running a Softball tournament in the adjacent "Higgs Field". The Hardronic Festival is the main yearly CERN music event, and it is organized with the support of the Staff Association and the CERN Administration.

  5. Quick test for durability factor estimation.

    Science.gov (United States)

    2010-03-01

    The Missouri Department of Transportation (MoDOT) is considering the use of the AASHTO T 161 Durability Factor (DF) as an endresult : performance specification criterion for evaluation of paving concrete. However, the test method duration can exceed ...

  6. Durability of cracked fibre reinforced concrete structures

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place

    1998-01-01

    Durability studies are carried out at BKM as part of the research project "Design Methods for Fibre Reinforced Concrete" (FRC) involving BKM, The Concrete Research Center at DTI, Building Technology at Aalborg University, Rambøll, 4K-Beton and Rasmussen & Schiøtz. Concrete beams with or without...... fibre reinforcement are exposed to a combination of mechanical and environmental load to indicate whether fibre reinforcement will improve the durability of cracked concrete structures. Secondly, it is the aim to identify important mechanisms for the effect of the fibre reinforcement on the durability......) and polypropylene fibres (PP) are used in the concrete beams as well as main reinforcement. Results of the durability tests on cracked FRC-beams are compared with results for uncracked FRC-beams and beams without fibres....

  7. Mechanistic Enhancement of SOFC Cathode Durability

    Energy Technology Data Exchange (ETDEWEB)

    Wachsman, Eric [Univ. of Maryland, College Park, MD (United States)

    2016-02-01

    Durability of solid oxide fuel cells (SOFC) under “real world” conditions is an issue for commercial deployment. In particular cathode exposure to moisture, CO2, Cr vapor (from interconnects and BOP), and particulates results in long-term performance degradation issues. Here, we have conducted a multi-faceted fundamental investigation of the effect of these contaminants on cathode performance degradation mechanisms in order to establish cathode composition/structures and operational conditions to enhance cathode durability.

  8. International Conference on Durability of Critical Infrastructure

    CERN Document Server

    Cherepetskaya, Elena; Pospichal, Vaclav

    2017-01-01

    This book presents the proceedings of the International Conference on Durability of Critical Infrastructure. Monitoring and Testing held in Satov, Czech Republic from 6 to 9 December 2016. It discusses the developments in the theoretical and practical aspects in the fields of Safety, Sustainability and Durability of the Critical Infrastructure. The contributions are dealing with monitoring and testing of structural and composite materials with a new methods for their using for protection and prevention of the selected objects.

  9. Tourisme comme facteur de developpement durable

    Directory of Open Access Journals (Sweden)

    Roman LIVANDOVSCHI

    2017-10-01

    Full Text Available L’objectif principal de l’article est de présenter le concept et la signification du tourisme durable. On présente la définition du l’Organisation Mondiale du Tourisme qui définit le tourisme durable comme un tourisme qui tient pleinement compte de ses impacts économiques, sociaux et environnementaux actuels et futurs, répond aux besoins des visiteurs, de l'industrie, de l’environnement et des communautés hôtes. On souligne les agendas 21 locaux qui ont engagé une démarche territoriale dans le développement du tourisme durable. Une caractéristique fondamentale du secteur du tourisme est sa capacité de relier les aspects économiques, sociaux, culturels et environnementaux du développement durable. L’article traite les acteurs du tourisme durable et explique le rôle important des gouvernements dans le développement durable du tourisme.

  10. Colonization of colliery spoil heaps by millipedes (Diplopoda) and terrestrial isopods (Oniscidea) in the Sokolov region, Czech Republic

    Czech Academy of Sciences Publication Activity Database

    Tajovský, Karel

    2001-01-01

    Roč. 9, č. 4 (2001), s. 365-369 ISSN 1061-2971 Institutional research plan: CEZ:AV0Z6066911 Keywords : colliery spoil heaps * succession * rekultivation Subject RIV: EH - Ecology, Behaviour Impact factor: 1.011, year: 2001

  11. Efficacy of Designer Biochars with or without Lime Application for Remediating Heavy Metals in Mine Spoil Soils

    Science.gov (United States)

    Sigua, Gilbert C.; Novak, Jeffrey; Johnson, Mark; Ippolito, James; Spokas, Kurt; Ducey, Thomas; Trippe, Kristin

    2017-04-01

    A multitude of research investigations have confirmed that biochars can increase soil carbon sequestration, improve critical plant nutrient concentrations, and improve the fertility, chemical, and physical properties of degraded agricultural soils. Recently, biochars ability to sequester metals has caught the attention of the mine reclamation sector. It is proposed that biochar is a suitable amendment to remediate heavy metals in mine spoils, as well as improve chemical conditions for enhanced plant growth. Better plant growth will improve phytostabilization, increase containment of metal-laden sediment, while also reducing potential metal uptake by plants. As such, utilization of a biochar with appropriate chemical and physical characteristics is crucial for effective binding of heavy metals while also improving plant growth conditions in mine spoils. Using two different mine spoils, we conducted laboratory and greenhouse experiments to determine the ability of designer biochar with or without lime application to favorably improve soil pH, reduce heavy metal bioavailability, and improve grass (e.g., wild blue rye) plant nutrient uptake. Preliminary results showed that our designer biochars did increase pH of acid mine spoils significantly (pheavy metals (e.g. aluminum, chromium, zinc, nickel, zinc, manganese, copper and cadmium) in the soils.

  12. Rollerjaw Rock Crusher

    Science.gov (United States)

    Peters, Gregory; Brown, Kyle; Fuerstenau, Stephen

    2009-01-01

    The rollerjaw rock crusher melds the concepts of jaw crushing and roll crushing long employed in the mining and rock-crushing industries. Rollerjaw rock crushers have been proposed for inclusion in geological exploration missions on Mars, where they would be used to pulverize rock samples into powders in the tens of micrometer particle size range required for analysis by scientific instruments.

  13. Dump stability and soil fertility of a coal mine spoil in Indian dry tropical environment: a long-term study.

    Science.gov (United States)

    Tripathi, Nimisha; Singh, Raj Shekhar; Chaulya, Swadesh K

    2012-10-01

    Plant available nitrogen, belowground (root) biomass, soil nitrogen (N) mineralization and microbial biomass N (MBN) were studied for 12 years at the interval of 2 years (0, 2, 4, 6, 8, 10 and 12 years) and mine dump stability at the intervals of 6 years (0, 6 and 12 years) after re-vegetation on coal mine spoil site. Plant available nitrogen in revegetated mine spoil ranged from 4.51 to 6.59 μg g(-1), net N-mineralization from 1.87 to 13.85 μg g(-1) month(-1), MBN from 10 to 22.63 μg g(-1), and root biomass from 28 to 566 g(-2). Mining activity has caused a change in soil characteristics including plant available nutrients like nitrate-N, ammonium-N and phosphate-P by 70, 67, and 76 %, respectively, N-mineralization by 93 %, root biomass values by 97 % and MBN values by 91 % compared to forest ecosystems. Revegetation of mine spoil produced increase in root biomass values by 1.3, 7.6 and 17.2 times, mineral N values by 1.22, 1.43 and 1.79 times, N-mineralization values by 1.8, 5.2 and 12.6 times and MBN values by 1.6, 2.0, and 3.4 times in 2, 6 and 12 years, respectively. Below ground biomass was highly co-related with microbial biomass and plant available nutrients. N-mineralization, plant available nutrients and the clay content were positively correlated with age of revegetation (P soil fertility status in mine spoil, where plant biomass and microbial biomass provide major contributions in ecological redevelopment of the mine spoil.

  14. Contribution of arbuscular mycorrhizal fungi to the development of maize (Zea mays L.) grown in three types of coal mine spoils.

    Science.gov (United States)

    Guo, Wei; Zhao, Renxin; Fu, Ruiying; Bi, Na; Wang, Lixin; Zhao, Wenjing; Guo, Jiangyuan; Zhang, Jun

    2014-03-01

    Coal mine spoils are usually unfavorable for plant growth and have different properties according to dumping years, weathering degree, and the occurrence of spontaneous combustion. The establishment of plant cover in mine spoils can be facilitated by arbuscular mycorrhizal fungi (AMF). A greenhouse pot experiment was conducted to evaluate the importance of AMF in plant adaptation to different mine spoils and the potential role of AMF for revegetation practices. We investigated the effects of Glomus aggregatum, Rhizophagus intraradices (syn. Glomus intraradices), and Funneliformis mosseae (syn. Glomus mosseae) on the growth, nutritional status, and metal uptake of maize (Zea mays L.) grown in recent discharged (S1), weathered (S2), and spontaneous combusted (S3) coal mine spoils. Symbiotic associations were successfully established between AMF and maize in three substrates. Mycorrhizal colonization effectively promoted plant growth by significantly increasing the uptake of nitrogen (N), phosphorus (P), and potassium (K), adjusting C:N:P stoichiometry and alleviating toxic effects of heavy metals. G. aggregatum, R. intraradices, and F. mosseae exhibited different mycorrhizal effects in response to mine spoil types. F. mosseae was the most effective in the development of maize in S1 and may be the most appropriate for revegetation of this substrate, while R. intraradices played the most beneficial role in S2 and S3. Our results suggest that inoculation with AMF can enhance plant adaptation to different types of coal mine spoils and play a positive role in the revegetation of coal mine spoil banks.

  15. In vivo quantitative NMR imaging of fruit tissues during growth using Spoiled Gradient Echo sequence

    DEFF Research Database (Denmark)

    Kenouche, S.; Perrier, M.; Bertin, N.

    2014-01-01

    the intrinsic parameters maps M 0 and T 1 of the fruit tissues. Water transport and paths flow were monitored using Gd 3+/[Fe(CN)6]3-/D - mannitol nanoparticles as a tracer. This dynamic study was carried out using a compartmental modeling. The CA was preferentially accumulated in the surrounding tissues...... of this study was to design a robust and accurate quantitative measurement method based on NMR imaging combined with contrast agent (CA) for mapping and quantifying water transport in growing cherry tomato fruits. A multiple flip-angle Spoiled Gradient Echo (SGE) imaging sequence was used to evaluate...... of columella and in the seed envelopes. The total quantities and the average volume flow of water estimated are: 198 mg, 1.76 mm 3/h for the columella and 326 mg, 2.91 mm 3/h for the seed envelopes. We demonstrate in this paper that the NMR imaging technique coupled with efficient and biocompatible CA...

  16. Behavior of Psychrotrophic Lactic Acid Bacteria Isolated from Spoiling Cooked Meat Products

    Science.gov (United States)

    Hamasaki, Yoshikatsu; Ayaki, Mitsuko; Fuchu, Hidetaka; Sugiyama, Masaaki; Morita, Hidetoshi

    2003-01-01

    Three kinds of lactic acid bacteria were isolated from spoiling cooked meat products stored below 10°C. They were identified as Leuconostoc mesenteroides subsp. mesenteroides, Lactococcus lactis subsp. lactis, and Leuconostoc citreum. All three strains grew well in MRS broth at 10°C. In particular, L. mesenteroides subsp. mesenteroides and L. citreum grew even at 4°C, and their doubling times were 23.6 and 51.5 h, respectively. On the other hand, although the bacteria were initially below the detection limit (<10 CFU/g) in model cooked meat products, the bacterial counts increased to 108 CFU/g at 10°C after 7 to 12 days. PMID:12788779

  17. Selenium transformation in coal mine spoils: Its environmental impact assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Harness, J.; Atalay, A.; Koll, K.J.; Zhang, H.; Maggon, D.

    1991-12-31

    The objective of this program was to conduct an environmental impact assessment study for selenium from coal mine spoils. The use of in-situ lysimetry to predict selenium speciation, transformation, and mobility under natural conditions was evaluated. The scope of the study was to construct and test field-scale lysimeter and laboratory mini-column to assess mobility and speciation of selenium in coal mine overburden and soil systems; to conduct soil and groundwater sampling throughout the state of Oklahoma for an overall environmental impact assessment of selenium; and to conduct an in-depth literature review on the solubility, speciation, mobility, and toxicity of selenium from various sources. Groundwater and surface soil samples were also collected from each county in Oklahoma. Data collected from the lysimeter study indicated that selenium in the overburden of the abandoned mine site was mainly found in the selenite form. The amount of selenite found was too low and immobile to be of concern to the environment. The spoil had equilibrated long enough (over 50 years) that most of the soluble forms of selenium have already been lost. Examination of the overburden indicated the presence of pyrite crystals that precipitated over time. The laboratory mini-column study indicated that selenite is quite immobile and remained on the overburden material even after leaching with dilute acid. Data from groundwater samples indicated that based on the current permissible level for selenium in groundwater (0.01 mg Se/L), Oklahoma groundwater is widely contaminated with the element. However, according to the new regulation (0.05 mg Se/L), which is to be promulgated in 1992, only 9 of the 77 counties in the state exceed the limit.

  18. A generalized definition for waste form durability

    International Nuclear Information System (INIS)

    Fanning, T. H.; Bauer, T. H.; Morris, E. E.; Wigeland, R. A.

    2002-01-01

    When evaluating waste form performance, the term ''durability'' often appears in casual discourse, but in the technical literature, the focus is often on waste form ''degradation'' in terms of mass lost per unit area per unit time. Waste form degradation plays a key role in developing models of the long-term performance in a repository environment, but other factors also influence waste form performance. These include waste form geometry; density, porosity, and cracking; the presence of cladding; in-package chemistry feedback; etc. The paper proposes a formal definition of waste form ''durability'' which accounts for these effects. Examples from simple systems as well as from complex models used in the Total System Performance Assessment of Yucca Mountain are provided. The application of ''durability'' in the selection of bounding models is also discussed

  19. Pyramiding for Resistance Durability: Theory and Practice.

    Science.gov (United States)

    Mundt, Chris

    2018-04-12

    Durable disease resistance is a key component of global food security, and combining resistance genes into "pyramids" is an important way to increase durability of resistance. The mechanisms by which pyramids impact durability are not well known. The traditional view of resistance pyramids considers the use of major resistance gene (R-gene) combinations deployed against pathogens that are primarily asexual. Interestingly, published examples of the successful use of pyramids in the traditional sense are rare. In contrast, most published descriptions of durable pyramids in practice are for cereal rusts, and tend to indicate an association between durability and cultivars combining major R-genes with incompletely expressed, adult plant resistance genes. Pyramids have been investigated experimentally for a diversity of pathogens, and many reduce disease levels below that of the single best gene. Resistance gene combinations have been identified through phenotypic reactions, molecular markers, and challenge against effector genes. As resistance genes do not express equally in all genetic backgrounds, however, a combination of genetic information and phenotypic analyses provide the ideal scenario for testing of putative pyramids. Not all resistance genes contribute equally to pyramids, and approaches have been suggested to identify the best genes and combinations of genes for inclusion. Combining multiple resistance genes into a single plant genotype quickly is a challenge that is being addressed through alternative breeding approaches, as well as through genomics tools such as resistance gene cassettes and gene editing. Experimental and modeling tests of pyramid durability are in their infancy, but have promise to help direct future studies of pyramids. Several areas for further work on resistance gene pyramids are suggested.

  20. Durable resistance to wheat stem rust needed.

    Science.gov (United States)

    Ayliffe, Michael; Singh, Ravi; Lagudah, Evans

    2008-04-01

    The recent outbreak of a new wheat stem rust race capable of parasitizing many commercial wheat cultivars highlights the need for durable disease resistance in crop plants. More advanced breeding approaches using quantitative disease resistance genes and resistance gene pyramids are being used to combat wheat stem rust and other diseases, though widespread adoption of these breeding methodologies is needed to maintain resistance efficacy. Advances in understanding the molecular basis of plant disease resistance at both host and nonhost levels offers further possibilities for stem rust resistance using biotechnological approaches. However, truly durable resistance to wheat stem rust and other phytopathogens seems an unlikely prospect in the face of continually evolving pathogen populations.

  1. Probabilistic Durability Analysis in Advanced Engineering Design

    Directory of Open Access Journals (Sweden)

    A. Kudzys

    2000-01-01

    Full Text Available Expedience of probabilistic durability concepts and approaches in advanced engineering design of building materials, structural members and systems is considered. Target margin values of structural safety and serviceability indices are analyzed and their draft values are presented. Analytical methods of the cumulative coefficient of correlation and the limit transient action effect for calculation of reliability indices are given. Analysis can be used for probabilistic durability assessment of carrying and enclosure metal, reinforced concrete, wood, plastic, masonry both homogeneous and sandwich or composite structures and some kinds of equipments. Analysis models can be applied in other engineering fields.

  2. Durability of cracked fibre reinforced concrete structures

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place; Nielsen, Laila

    1997-01-01

    (capillary water uptake) is used, involving an in-situ method and a laboratory method. Three different concrete qualities as well as steel fibres (ZP) and polypropylene fibres (PP) are used. Results of the durability tests on cracked FRC-beams are compared to results for uncracked FRC-beams and beams without......Durability studies are carried out by subjecting FRC-beams to combined mechanical and environmental load. Mechanical load is obtained by exposing beams to il-point bending until a predefined crack width is reached, using a newly developed test setup. As environmental load, exposure to water...

  3. Rocks Can Wow? Yes, Rocks Can Wow!

    Science.gov (United States)

    Hardman, Sally; Luke, Sue

    2016-01-01

    Rocks and fossils appear in the National Curriculum of England science programmes of study for children in year 3 (ages 7-8). A frequently asked question is "How do you make the classification of rocks engaging?" In response to this request from a school, a set of interactive activities was designed and organised by tutors and students…

  4. Experimental study of polyurethane foam reinforced soil used as a rock-like material

    Directory of Open Access Journals (Sweden)

    Eren Komurlu

    2015-10-01

    Full Text Available In this study, polyurethane foam type thermoset polymerizing, due to chemical reaction between its liquid ingredients, was tested as binder after solidifying and then a rock-like material mixing with a sandy silt type soil was prepared. The uniaxial compressive strengths (UCSs of polyurethane foam reinforced soil specimens were determined for different polyurethane ratios in the mixture. Additionally, a series of tests on slake durability, impact value, freezing–thawing resistance, and abrasion resistance of polyurethane reinforced soil (PRS mixture was conducted. The UCS values over 3 MPa were measured from the PRS specimens. The testing results showed that treated soil can economically become a desirable rock-like material in terms of slake durability and resistances against freezing–thawing, impact effect and abrasion. As another characteristic of the rock-like material made with polyurethane foam, unit volume weight was found to be quite lower than those of natural rock materials.

  5. Hydrological remedial actions for polluted overburden dumps, spoils and landfills. Papers and posters; Wasserwirtschaftliche Sanierung von Bergbaukippen, Halden und Deponien. Vortraege und Posterbeitraege

    Energy Technology Data Exchange (ETDEWEB)

    Pohl, A. [ed.; Haefner, F.; Schmidt, J.; Merkel, B. [comps.

    2000-07-01

    This publication contains the papers and posters presented at the conference 'Hydrological remedial actions for polluted overburden dumps, spoils and landfills. 35 Papers have been recorded as separate citations in this database.

  6. Rock Slope Design Criteria

    Science.gov (United States)

    2010-06-01

    Based on the stratigraphy and the type of slope stability problems, the flat lying, Paleozoic age, sedimentary : rocks of Ohio were divided into three design units: 1) competent rock design unit consisting of sandstones, limestones, : and siltstones ...

  7. Rocks in Our Pockets

    Science.gov (United States)

    Plummer, Donna; Kuhlman, Wilma

    2005-01-01

    To introduce students to rocks and their characteristics, teacher can begin rock units with the activities described in this article. Students need the ability to make simple observations using their senses and simple tools.

  8. Rock slope design guide.

    Science.gov (United States)

    2011-04-01

    This Manual is intended to provide guidance for the design of rock cut slopes, rockfall catchment, and : rockfall controls. Recommendations presented in this manual are based on research presented in Shakoor : and Admassu (2010) entitled Rock Slop...

  9. Leaching results in the assessement of slag and rock materials as construction material

    OpenAIRE

    Tossavainen, Mia

    2005-01-01

    Extraction of rock material and ore for construction and metal production involves large quantities of wastes and by-products. Iron- and steelmaking slag has durability qualities and latent cementitious properties which are positive in construction. The leaching of so-called hazardous metals is important in the evaluation of secondary materials for utilization, while knowledge of the leaching behaviour is not required for rock materials used in road making. Iron- and steelmaking slags have va...

  10. Durability improvement assessment in different high strength ...

    Indian Academy of Sciences (India)

    In order to study the durability of structural concrete against aggressive agents, specimens were immersed in different types of acids solution (5% H2SO4 and HCl) to compare their effects on 60th, 90th and 120th day. In general, sulphuric acid and hydrochloric acid are known to be the most aggressive natural threats from ...

  11. Enhancing composite durability : using thermal treatments

    Science.gov (United States)

    Jerrold E. Winandy; W. Ramsay Smith

    2007-01-01

    The use of thermal treatments to enhance the moisture resistance and aboveground durability of solid wood materials has been studied for years. Much work was done at the Forest Products Laboratory in the last 15 years on the fundamental process of both short-and long-term exposure to heat on wood materials and its interaction with various treatment chemicals. This work...

  12. Durability of wood-plastic composite lumber

    Science.gov (United States)

    Rebecca E. Ibach

    2010-01-01

    Wood-plastic composite (WPC) lumber has been marketed as a low-maintenance, high-durability product. Retail sales in the United States were slightly less than $1 billion in 2008. Applications include docking, railing, windows, doors, fencing, siding, moldings, landscape timbers, car interior parts, and furniture. The majority of these products are used outdoors and...

  13. Durable, Low-Cost Educational Software.

    Science.gov (United States)

    Thomas, Ruth

    1994-01-01

    Discusses the costs of producing durable educational software in an academic environment and describes an optimized software life cycle that has been implemented at the University of Cambridge (England) Engineering Department. Topics addressed include needs assessment; specifications; program design; implementation and testing; feedback; and…

  14. Durable Glass For Thousands Of Years

    International Nuclear Information System (INIS)

    Jantzen, C.

    2009-01-01

    The durability of natural glasses on geological time scales and ancient glasses for thousands of years is well documented. The necessity to predict the durability of high level nuclear waste (HLW) glasses on extended time scales has led to various thermodynamic and kinetic approaches. Advances in the measurement of medium range order (MRO) in glasses has led to the understanding that the molecular structure of a glass, and thus the glass composition, controls the glass durability by establishing the distribution of ion exchange sites, hydrolysis sites, and the access of water to those sites. During the early stages of glass dissolution, a 'gel' layer resembling a membrane forms through which ions exchange between the glass and the leachant. The hydrated gel layer exhibits acid/base properties which are manifested as the pH dependence of the thickness and nature of the gel layer. The gel layer ages into clay or zeolite minerals by Ostwald ripening. Zeolite mineral assemblages (higher pH and Al 3+ rich glasses) may cause the dissolution rate to increase which is undesirable for long-term performance of glass in the environment. Thermodynamic and structural approaches to the prediction of glass durability are compared versus Ostwald ripening.

  15. 40 CFR 610.33 - Durability tests.

    Science.gov (United States)

    2010-07-01

    ....33 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY... problems, deterioration in spark plug life, increase in carburetor or combustion chamber deposits, or..., then a durability run may be made as described in subpart E, in which fuel economy and exhaust...

  16. Accelerated Testing of Solar Collector Durability

    DEFF Research Database (Denmark)

    Svendsen, Sv Aa Højgaard

    1996-01-01

    A climatic simulator has been build to test the reliability and durability of solar collectors. In the climatic simulator the collector is expåosed to extreme climatic conditions and temperature variations in an accelerated way and during this process the function of the collector is tested and t...... and the microclimate in the collector box is measured....

  17. Selection procedures for durable resistance in wheat

    NARCIS (Netherlands)

    Beek, M.A.

    1988-01-01

    A wheat breeding programme for durable resistance to all locally important pathogens: leaf rust, stem rust, powdery mildew, Septoria nodorum, Septoria tritici, Cochliobolus sativus, Fusarium graminearum, Common Root Rot, Barley Yellow Dwarf Virus and Soil Borne Mosaic

  18. Advantage from Funding Durable Centers Leasing

    Directory of Open Access Journals (Sweden)

    Alina Zając

    2009-09-01

    Full Text Available In present market conditions huge number of businessmen has problems from gain over from banks capital on purchase of durable centers not only, but also on develop - ment and operating activity Individual can use with different forms funding investment, it which is between different leasing.

  19. DURABLE GLASS FOR THOUSANDS OF YEARS

    Energy Technology Data Exchange (ETDEWEB)

    Jantzen, C.

    2009-12-04

    The durability of natural glasses on geological time scales and ancient glasses for thousands of years is well documented. The necessity to predict the durability of high level nuclear waste (HLW) glasses on extended time scales has led to various thermodynamic and kinetic approaches. Advances in the measurement of medium range order (MRO) in glasses has led to the understanding that the molecular structure of a glass, and thus the glass composition, controls the glass durability by establishing the distribution of ion exchange sites, hydrolysis sites, and the access of water to those sites. During the early stages of glass dissolution, a 'gel' layer resembling a membrane forms through which ions exchange between the glass and the leachant. The hydrated gel layer exhibits acid/base properties which are manifested as the pH dependence of the thickness and nature of the gel layer. The gel layer ages into clay or zeolite minerals by Ostwald ripening. Zeolite mineral assemblages (higher pH and Al{sup 3+} rich glasses) may cause the dissolution rate to increase which is undesirable for long-term performance of glass in the environment. Thermodynamic and structural approaches to the prediction of glass durability are compared versus Ostwald ripening.

  20. Issues and concepts for making durable composites

    Science.gov (United States)

    Frederick A. Kamke; Jerrold E. Winandy

    2008-01-01

    Perhaps the greatest obstacle facing the acceptance of engineered wood composite products into new markets is the perceived lack of durability. Public perception is that particleboard and other wood-based composites fall apart when exposed to water. This paper will review the unique characteristics of wood based composites that make them more or less susceptible to...

  1. Water and materials balances of a spoil bank of an abandoned uranium mine in the Freital district, Sachsen

    International Nuclear Information System (INIS)

    Biehler, D.

    2000-01-01

    Sanitation of former uranium mines started immediately after uranium mining in East Germany was abandoned in 1990. In the case of shaft 1 of the Dresden-Gittersee mine, a multilayer mineral sealing system was decided. As required by the radiation protection authorities, the Wismut GmbH initiated a detailed hydrogeological expert's opinion including a forecast of the long-term effects of sealing on the basis of hydrogeological data and a material flow analysis for the spoil bank [de

  2. Subterranean clover enhances production of [open quote]Coastal[close quote] bermudagrass in the revegetation of lignite mine spoil

    Energy Technology Data Exchange (ETDEWEB)

    Harris, P.A. (Kansas Agriculture Experimental Station, Hays (United States)); Zuberer, D.A. (Texas A M Univ., College Station (United States))

    Lignite mine spoils in Texas are commonly revegetated with [open quote]Coastal[close quote] bermudagrass [Cynodon dactylon (L.) Pers.]. Legumes have been overseeded in bermudagrass in reclamation programs in Texas, but information regarding establishment and persistence in mine spoil is limited. A field study investigated the effects of fertilization and inoculation with Rhizobium spp. on subterranean clover (Trifolium subterraneum L.; subclover) establishment and production in mine spoil and to assess the effect of subclover on Coastal bermudagrass. Subclover seed was broadcast into a 6-mo-old bermudagrass sod in October 1986. Individual plots were fertilized, or left unfertilized at the beginning of each clover season (Sept.-Oct.); however, all plots were fertilized at the start of each grass season (April-May). Although native rhizobia was present in plots, inoculation with a commercial, multi-strain inoculant increases subclover forage production (100%) and total N and P yields of subclover. The overseeding of subclover into the bermuda grass sod increased grass production and total N and P yields later in the first year and in the second season. However, inoculation of subclover had little effect on subsequent grass production. There was an apparent positive benefit of P fertilization on subclover and bermudagrass production. The effect of subclover on grass production was apparent by the end of the first grass season, and it became even more evident in the second year. The results showed that subclover was established and maintained for at least two seasons in a bermudagrass sod on reclaimed lignite spoil, and that the clover benefited the subsequent grass crop when fertilized with P and K, apparently by providing extra [open quotes]fixed[close quotes] N for grass production. 22 refs., 5 tabs.

  3. Assessment of biochar and iron filing amendments for the remediation of a metal, arsenic and phenanthrene co-contaminated spoil

    International Nuclear Information System (INIS)

    Sneath, Helen E.; Hutchings, Tony R.; Leij, Frans A.A.M. de

    2013-01-01

    Sites contaminated with mixtures of metals, metalloids and organics are difficult to remediate as each contaminant type may require a different treatment. Biochar, with high metal sorption capacity, used singly and in combination with iron filings, is investigated in microcosm trials to immobilise metal(loid)s within a contaminated spoil, thereby enabling revegetation and degradation of organic pollutants. A mine spoil, contaminated with heavy metals, arsenic and spiked with phenanthrene was treated with either 1%w/w biochar, 5%w/w iron or their combination, enhancing phenanthrene degradation by 44–65%. Biochar treatment reduced Cu leaching and enabled sunflower growth, but had no significant effect on As mobility. Iron treatment reduced Cu and As leaching but negatively impacted soil structure and released high levels of Fe causing sunflower plant mortality. The combined treatment reduced both Cu and As leaching and enabled sunflower growth suggesting this could be a useful approach for treating co-contaminated sites. -- Highlights: ► 56 day microcosm trials examine biochar for remediation of co-contaminated sites. ► Biochar reduces leachable Cu concentrations but phytotoxicity remains. ► Iron filings are investigated as a co-amendment with biochar to reduce As leaching. ► Removal of metal toxicity stimulates phenanthrene degradation. ► Biochar could enable revegetation of contaminated sites. -- Biochar and iron filings incorporated into contaminated spoils reduce Cu and As leaching and stimulate phenanthrene degradation, but do not prevent phytotoxicity to sunflowers

  4. The influence of humidity on strengths and durability of light guides fibers

    International Nuclear Information System (INIS)

    Karimov, S.N.; Kuksenko, V.S.; Sultonov, U.; Abdumanonov, A.; Shamsidinov, M.I.

    1993-01-01

    Humidity influence on durability and light water durability fibres is studied are studied in this article. Humidity energy under influence of process destruction decreases activity, durability and durability decreases is shown

  5. A systematic investigation into the extraction of aluminum from coal spoil through kaolinite.

    Science.gov (United States)

    Qiao, X C; Si, P; Yu, J G

    2008-11-15

    This research has applied kaolin and active carbon (AC) to the investigation of the recovery of aluminum from coal spoil (CS). The kaolin, AC-containing kaolin mixture, and CS have been calcined at 500, 600, 700, 800, and 900 degrees C for 15, 30, 60, and 120 min. The transformation of kaolinite and aluminum extraction that occurred in each calcined sample have been characterized using XRD, TG, IR, and hydrochloric acid leaching methods. The dehydroxylation of kaolinite and the decomposition of metakaolin were influenced by thermal treatment temperature and time. The metakaolin had kept a portion of OH- in its structure until it was calcined at a temperature of 800 degrees C. Under 60 min treatment, new SiO2 phase was able to be formed at 500 degrees C, kaolinite was totally converted to metakaolin at 600 degrees C, and the SiO2 rejoined the reaction at 800 degrees C. The decompositions of CS were similar to those of kaolin mixture containing 20 wt % AC (MKC). The combustion of combustible matter accelerated the decomposition of kaolinite in the CS and MKC. Higher AC content led to lower aluminum extraction. The treatment at 600 degrees C was optimal for both CS and MKC.

  6. Data-driven optimized flip angle selection for T1 estimation from spoiled gradient echo acquisitions.

    Science.gov (United States)

    Lewis, Christina M; Hurley, Samuel A; Meyerand, M Elizabeth; Koay, Cheng Guan

    2016-09-01

    Define criteria for selection of optimal flip angle sets for T1 estimation and evaluate effects on T1 mapping. Flip angle sets for spoiled gradient echo-based T1 mapping were selected by minimizing T1 estimate variance weighted by the joint density of M0 and T1 in an initial acquisition. The effect of optimized flip angle selection on T1 estimate error was measured using simulations and experimental data in the human and rat brain. For two-point acquisitions, optimized angle sets were similar to those proposed by other groups and, therefore, performed similarly. For multipoint acquisitions, optimal angle sets for T1 mapping in the brain consisted of a repetition of two angles. Implementation of optimal angles reduced T1 estimate variance by 30-40% compared with a multipoint acquisition using a range of angles. Performance of the optimal angle set was equivalent to that of a repetition of the two-angle set selected using criteria proposed by other researchers. Repetition of two carefully selected flip angles notably improves the precision of resulting T1 estimates compared with acquisitions using a range of flip angles. This work provides a flexible and widely applicable optimization method of particular use for those who repeatedly perform T1 estimation. Magn Reson Med 76:792-802, 2016. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

  7. Response surface optimization of biosurfactant produced by Pseudomonas aeruginosa MA01 isolated from spoiled apples.

    Science.gov (United States)

    Abbasi, Habib; Sharafi, Hakimeh; Alidost, Leila; Bodagh, Atefe; Zahiri, Hossein Shahbani; Noghabi, Kambiz Akbari

    2013-01-01

    A potent biosurfactant-producing bacterial strain isolated from spoiled apples was identified by 16S rRNA as Pseudomonas aeruginosa MA01. Compositional analysis revealed that the extracted biosurfactant was composed of high percentages of lipid (66%, w/w) and carbohydrate (32%, w/w). The surface tension of pure water decreased gradually with increasing biosurfactant concentration to 32.5 mN m(-1) with critical micelle concentration (CMC) value of 10.1 mg L(-1). The Fourier transform infrared spectrum of extracted biosurfactant confirmed the glycolipid nature of this natural product. Response surface methodology (RSM) was employed to optimize the biosynthesis medium for the production of MA01 biosurfactant. Nineteen carbon sources and 11 nitrogen sources were examined, with soybean oil and sodium nitrate being the most effective carbon and nitrogen sources on biosurfactant production, respectively. Among the organic nitrogen sources examined, yeast extract was necessary as a complementary nitrogen source for high production yield. Biosurfactant production at the optimum value of fermentation processing factor (15.68 g/L) was 29.5% higher than the biosurfactant concentration obtained before the RSM optimization (12.1 g/L). A central composite design algorithm was used to optimize the levels of key medium components, and it was concluded that two stages of optimization using RSM could increase biosurfactant production by 1.46 times, as compared to the values obtained before optimization.

  8. Identifying yeast isolated from spoiled peach puree and assessment of its batch culture for invertase production

    Directory of Open Access Journals (Sweden)

    Marcela Vega FERREIRA

    Full Text Available Abstract The identification of yeasts isolated from spoiled Jubileu peach puree using the API 20C AUX method and a commercial yeast as witness were studied. Subsequently, the yeast’s growth potential using two batch culture treatments were performed to evaluate number of colonies (N, reducing sugar concentration (RS, free-invertase (FI, and culture-invertase activity (CI. Stock cultures were maintained on potato dextrose agar (PDA slants at 4 °C and pH 5 for later use for batch-culture (150 rpm at 30°C for 24 h, then they were stored at 4 °C for subsequent invertase extraction. The FI extract was obtained using NaHCO3 as autolysis agent, and CI activity was determined on the supernatant after batch-cultured centrifugation. The activity was followed by an increase in absorbance at 490 nm using the acid 3,5-DNS method with glucose standard. Of the four yeasts identified, Saccharomyces cerevisiae was chosen for legal reasons. It showed logarithmic growth up to 18 h of fermentation with positive correlation CI activity and inverse with RS. FI showed greater activity by the end of the log phase and an inverse correlation with CI activity. Finally, it was concluded that treatment “A” is more effective than “B” to produce invertase (EC 3.2.1.26.

  9. Lead Tolerance and Accumulation in Hirschfeldia incana, a Mediterranean Brassicaceae from Metalliferous Mine Spoils

    Science.gov (United States)

    Auguy, Florence; Fahr, Mouna; Moulin, Patricia; Brugel, Anaïs; Laplaze, Laurent; Mzibri, Mohamed El; Filali-Maltouf, Abdelkarim; Doumas, Patrick; Smouni, Abdelaziz

    2013-01-01

    Lead is a heavy metal of particular concern with respect to environmental quality and health. The lack of plant species that accumulate and tolerate Pb is a limiting factor to understand the molecular mechanisms involved in Pb tolerance. In this study we identified Hirschfeldia incana, a Brassicaceae collected from metalliferous mine spoils in Morocco, as a Pb accumulator plant. H. incana exhibited high Pb accumulation in mine soils and in hydroponic cultures. Major Pb accumulation occurred in the roots and a part of Pb translocated from the roots to the shoots, even to the siliques. These findings demonstrated that H. incana is a Pb accumulator species. The expression of several candidate genes after Pb-exposure was measured by quantitative PCR and two of them, HiHMA4 and HiMT2a, coding respectively for a P1B-type ATPase and a metallothionein, were particularly induced by Pb-exposure in both roots and leaves. The functional characterization of HiHMA4 and HiMT2a was achieved using Arabidopsis T-DNA insertional mutants. Pb content and primary root growth analysis confirmed the role of these two genes in Pb tolerance and accumulation. H. incana could be considered as a good experimental model to identify genes involved in lead tolerance and accumulation in plants. PMID:23667449

  10. Scattering from Rock and Rock Outcrops

    Science.gov (United States)

    2018-01-23

    of the open questions which exist for scattering from these types of surfaces and include increasing our basic understanding of: (1) geoacoustic...ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) Office of Naval Research 875 North Randolph Street ...ideal mean seafloor could be mapped to the local SCATTERING FROM ROCKS 5 Figure 4. (color online) SAS images of the calibration rock outcrop. Boxes

  11. A case study of long-term geochemical evolution of coal waste rock drainage and its remediation

    Energy Technology Data Exchange (ETDEWEB)

    Jarvis, A.P.; Gandy, C.J. [Newcastle Univ. (United Kingdom). School of Civil Engineering and Geosciences, Hydrogeochemical Engineering Research and Outreach Group

    2010-07-01

    The geochemical evolution of drainage from an 35 hectare orphan waste rock pile over a 15-year period was described. Spoil material at the site was generated during coal mining at 2 collieries between 1922 and 1970, and was comprised of grey and black shale, ash, coal, and coal dust. The heap was founded on an impermeable clay layer. Located in northern England, drainage from the rock heap was intercepted by a small compost wetland system installed in 1997. The waste rock heap was selectively capped in 1998. Water samples were collected and analyzed. Anion concentrations were determined using an ion chromatograph. The samples were filtered periodically. Acidity concentrations and flow rates were determined. Results of the study showed measurable improvements in water quality as a result of capping the heap. The study demonstrated that a combination of selective spoil capping and wetland treatment can serve as a low-cost solution to acid mine drainage at some abandoned mine sites. 9 refs., 1 tab., 1 fig.

  12. Durability of cracked fibre reinforced concrete structures

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place; Nielsen, Laila

    1997-01-01

    (capillary water uptake) is used, involving an in-situ method and a laboratory method. Three different concrete qualities as well as steel fibres (ZP) and polypropylene fibres (PP) are used. Results of the durability tests on cracked FRC-beams are compared to results for uncracked FRC-beams and beams without......Durability studies are carried out by subjecting FRC-beams to combined mechanical and environmental load. Mechanical load is obtained by exposing beams to il-point bending until a predefined crack width is reached, using a newly developed test setup. As environmental load, exposure to water...... fibres and the influence of fibres and cracks on the water uptake is discussed....

  13. Development and durability of SOFC stacks

    Energy Technology Data Exchange (ETDEWEB)

    Beeaff, D.; Dinesen, A.R.; Mikkelsen, Lars; Nielsen, Karsten A.; Solvang, M.; Hendriksen, Peter V.

    2004-12-01

    The present project is a part of the Danish SOFC programme, which has the overall aim of establishing a Danish production of SOFC - cells, stacks and systems for economical and environmentally friendly power production. The aim of the present project was to develop and demonstrate (on a small scale, few cells, few thousand hours) a durable, thermally cyclable stack with high performance at 750 deg. C. Good progress towards this target has been made and demonstrated at the level of stack-elements (one cell between two interconnects) or small stacks (3 5 cells). Three different stacks or stack-elements have been operated for periods exceeding 3000 hr. The work has covered development of stack-components (seals, interconnects, coatings, contact layers), establishment of procedures for stack assembly and initiation, and detailed electrical characterisation with the aims of identifying performance limiting factors as well as long term durability. Further, post test investigations have been carried out to identify possible degradation mechanisms. (BA)

  14. Durable terrestrial bedrock predicts submarine canyon formation

    Science.gov (United States)

    Smith, Elliot; Finnegan, Noah J.; Mueller, Erich R.; Best, Rebecca J.

    2017-01-01

    Though submarine canyons are first-order topographic features of Earth, the processes responsible for their occurrence remain poorly understood. Potentially analogous studies of terrestrial rivers show that the flux and caliber of transported bedload are significant controls on bedrock incision. Here we hypothesize that coarse sediment load could exert a similar role in the formation of submarine canyons. We conducted a comprehensive empirical analysis of canyon occurrence along the West Coast of the contiguous United States which indicates that submarine canyon occurrence is best predicted by the occurrence of durable crystalline bedrock in adjacent terrestrial catchments. Canyon occurrence is also predicted by the flux of bed sediment to shore from terrestrial streams. Surprisingly, no significant correlation was observed between canyon occurrence and the slope or width of the continental shelf. These findings suggest that canyon incision is promoted by greater yields of durable terrestrial clasts to the shore.

  15. Durable Terrestrial Bedrock Predicts Submarine Canyon Formation

    Science.gov (United States)

    Smith, M. Elliot; Finnegan, Noah J.; Mueller, Erich R.; Best, Rebecca J.

    2017-10-01

    Though submarine canyons are first-order topographic features of Earth, the processes responsible for their occurrence remain poorly understood. Potentially analogous studies of terrestrial rivers show that the flux and caliber of transported bedload are significant controls on bedrock incision. Here we hypothesize that coarse sediment load could exert a similar role in the formation of submarine canyons. We conducted a comprehensive empirical analysis of canyon occurrence along the West Coast of the contiguous United States which indicates that submarine canyon occurrence is best predicted by the occurrence of durable crystalline bedrock in adjacent terrestrial catchments. Canyon occurrence is also predicted by the flux of bed sediment to shore from terrestrial streams. Surprisingly, no significant correlation was observed between canyon occurrence and the slope or width of the continental shelf. These findings suggest that canyon incision is promoted by greater yields of durable terrestrial clasts to the shore.

  16. developpement durable, management ecologique et ethique d ...

    African Journals Online (AJOL)

    Administrateur

    contrôle qualité, de gestion des cycles de vie des produits et de parti- cipation citoyenne. Dans ce contexte, l'entreprise algérienne compétitive est celle qui saura intégrer les problématiques du développement durable et du management environnemental, et ne les subit pas. L'image de l'en- treprise peut être valorisée par ...

  17. Intermediate Ethanol Blends Catalyst Durability Program

    Energy Technology Data Exchange (ETDEWEB)

    West, Brian H; Sluder, Scott; Knoll, Keith; Orban, John; Feng, Jingyu

    2012-02-01

    In the summer of 2007, the U.S. Department of Energy (DOE) initiated a test program to evaluate the potential impacts of intermediate ethanol blends (also known as mid-level blends) on legacy vehicles and other engines. The purpose of the test program was to develop information important to assessing the viability of using intermediate blends as a contributor to meeting national goals for the use of renewable fuels. Through a wide range of experimental activities, DOE is evaluating the effects of E15 and E20 - gasoline blended with 15% and 20% ethanol - on tailpipe and evaporative emissions, catalyst and engine durability, vehicle driveability, engine operability, and vehicle and engine materials. This report provides the results of the catalyst durability study, a substantial part of the overall test program. Results from additional projects will be reported separately. The principal purpose of the catalyst durability study was to investigate the effects of adding up to 20% ethanol to gasoline on the durability of catalysts and other aspects of the emissions control systems of vehicles. Section 1 provides further information about the purpose and context of the study. Section 2 describes the experimental approach for the test program, including vehicle selection, aging and emissions test cycle, fuel selection, and data handling and analysis. Section 3 summarizes the effects of the ethanol blends on emissions and fuel economy of the test vehicles. Section 4 summarizes notable unscheduled maintenance and testing issues experienced during the program. The appendixes provide additional detail about the statistical models used in the analysis, detailed statistical analyses, and detailed vehicle specifications.

  18. Amenagements sportifs et developpement durable : Des enjeux ...

    African Journals Online (AJOL)

    Sur ces aspects, les métamorphoses de la proximité ou de l'inter culturalité des modèles sociaux, constituent sans doute, quelques lignes directrices que cette étude s'attache à appréhender pour cerner toute la problématique du développement durable d'une part et mener par ailleurs une réflexion globale sur ce qui doit ...

  19. Fatigue durability under random cyclic loading

    Science.gov (United States)

    Volkov, S. S.; Struzhanov, V. V.

    2017-12-01

    Methods for predicting the durability of metals have been developed while taking into account the effect of random loads acting during the service life of structures. Methods of the theory of functions of random variables are applied. Normal distribution and the Rayleigh distribution are used to estimate the random loads from the experimental histogram. A numerical example illustrates the influence of the statistical parameters of the load distribution on the predicted number of cycles before failure.

  20. OPTIONS D'INTENSIFICATION DURABLE DES CULTURES ...

    African Journals Online (AJOL)

    (Received 14 August, 2001 ; accepted 10 May, 2002) RÉSUMÉ Pour intensifier de manière durable les cultures vivrières dans les zones de terres de barre dégradées au sud du Togo, plusieurs options ont été évaluées avec les paysans. Grâce à des entretiens collectifs de type participatif, sept différents groupes ...

  1. Effect Of Climatic Conditions On Durability

    Directory of Open Access Journals (Sweden)

    Ibrahem M. Al Kiki

    2013-04-01

    Full Text Available Durability is one of the most important subjects in the soil stabilization. Since there is no specifications concerned the durability of lime stabilized soils, several factors were selected to show their effects on the durability, namely: wetting, drying, freezing, thawing and slaking.The effect of each one of the above factors as well as the combined effect of two or more factors, were studied on the volume change and soil strength and weight loss of soil samples stabilized with optimum lime content except the slaking test at which soil samples stabilized with different lime content.Tests results showed that the higher the lime content the lower the slaking effect, also its found the soil strength decreased when the period of immersion or freezing increased. The strength of the lime stabilized soils decreased when subjected to the cycles of wetting and drying or to the cycles freezing and thawing. However, the  combined effect of wetting, drying, freezing and thawing has a pronounced effect on reduction of the lime stabilized clayey soil. The worst condition recorded when lime stabilized soil undergo to freezing then drying then wetting which should be avoided in the field

  2. Creep Behavior and Durability of Cracked CMC

    Science.gov (United States)

    Bhatt, R. T.; Fox, Dennis; Smith, Craig

    2015-01-01

    To understand failure mechanisms and durability of cracked Ceramic matrix composites (CMCs), Melt Infiltration (MI) SiCSiC composites with Sylramic-iBN fibers and full Chemical vapour infiltration SiCSiC composites with Sylramic-ion bombarded BN (iBN) and Hi-Nicalon -S fibers were pre-cracked between 150 to 200 megapascal and then creep and Sustained Peak Low Cycle Fatigue (SPLCF) tested at 13150 C at stress levels from 35 to 103 megapascal for up to 200 hours under furnace and burner rig conditions. In addition creep testing was also conducted on pre-cracked full Chemical vapour infiltration SiCSiC composites at 14500 C between 35 and 103 megapascal for up to 200 hours under furnace conditions. If the specimens survived the 200 hour durability tests, then they were tensile tested at room temperature to determine their residual tensile properties. The failed specimens were examined by Scanning electron microscope (SEM) to determine the failure modes and mechanisms. The influence of crack healing matrix, fiber types, crack density, testing modes and interface oxidation on durability of cracked Ceramic matrix composites (CMCs) will be discussed.

  3. Durability of heavyweight concrete containing barite

    International Nuclear Information System (INIS)

    Binici, Hanifi

    2010-01-01

    The supplementary waste barite aggregates deposit in Osmaniye, southern Turkey, has been estimated at around 500 000 000 tons based on 2007 records. The aim of the present study is to investigate the durability of concrete incorporating waste barite as coarse and river sand (RS), granule blast furnace slag (GBFS), granule basaltic pumice (GBP) and ≤ 4 mm granule barite (B) as fine aggregates. The properties of the fresh concrete determined included the air content, slump, slump loss and setting time. They also included the compressive strength, flexural and splitting tensile strengths and Young's modulus of elasticity, resistance to abrasion and sulphate resistance of hardened concrete. Besides these, control mortars were prepared with crushed limestone aggregates. The influence of waste barite as coarse aggregates and RS, GBFS, GBP and B as fine aggregates on the durability of the concretes was evaluated. The mass attenuation coefficients were calculated at photon energies of 1 keV to 100 GeV using XCOM and the obtained results were compared with the measurements at 0.66 and 1.25 MeV. The results showed the possibility of using these waste barite aggregates in the production of heavy concretes. In several cases, some of these properties have been improved. Durability of the concrete made with these waste aggregates was improved. Thus, these materials should be preferably used as aggregates in heavyweight concrete production. (orig.)

  4. Performance and durability of leading flexible ureteroscopes.

    Science.gov (United States)

    User, Herbert M; Hua, Vi; Blunt, Lynn W; Wambi, Chris; Gonzalez, Chris M; Nadler, Robert B

    2004-10-01

    The role of ureteronephroscopy in the diagnosis and treatment of upper-tract disease has expanded dramatically in recent years with technological advances. In a study involving 14 urologists, we measured the practical performance and durability of the most common commercially available flexible ureteroscopes. Six commercially available flexible ureteroscopes (Circon-ACMI DUR 8, ACMI DUR 8-Elite, Storz 11274AA, Wolf 7325.172-7.5Fr, Wolf 7330.072-9.0 Fr, Olympus URF-P3) were used consecutively 102 times over a 7-month period. Comparative data, including preoperative and postoperative maximal deflection angles and luminosity, were accumulated, as well as a survey of insertion methods, irrigation methods, instruments used in the working channel, visibility, maneuverability, and overall satisfaction. Maintenance records were analyzed to evaluate the need or reason for repair. Overall satisfaction, visibility, luminosity, and maneuverability were similar for all instruments. The ACMI DUR-8 Elite scored slightly higher than the others, but the difference was not statistically significant. Ureteroscopes were used an average of 10 to 34 times between breakages. The ACMI DUR-8 and DUR-8 Elite instruments had a higher durability score than the others, but with significantly more uses. Channel perforation by a laser fiber was the predominant cause of ureteroscope breakage. All ureteroscopes performed similarly by objective and subjective criteria. The largest and newest instruments were significantly more durable than the smaller ones, even in the hands of numerous endoscopists. This finding has significant implications for the cost-effectiveness of the various ureteroscopes.

  5. Experimental Study on Durability Improvement of Fly Ash Concrete with Durability Improving Admixture

    Directory of Open Access Journals (Sweden)

    Hong-zhu Quan

    2014-01-01

    Full Text Available In order to improve the durability of fly ash concrete, a series of experimental studies are carried out, where durability improving admixture is used to reduce drying shrinkage and improve freezing-thawing resistance. The effects of durability improving admixture, air content, water-binder ratio, and fly ash replacement ratio on the performance of fly ash concrete are discussed in this paper. The results show that by using durability improving admixture in nonair-entraining fly ash concrete, the compressive strength of fly ash concrete can be improved by 10%–20%, and the drying shrinkage is reduced by 60%. Carbonation resistance of concrete is roughly proportional to water-cement ratio regardless of water-binder ratio and fly ash replacement ratio. For the specimens cured in air for 2 weeks, the freezing-thawing resistance is improved. In addition, by making use of durability improving admixture, it is easier to control the air content and make fly ash concrete into nonair-entraining one. The quality of fly ash concrete is thereby optimized.

  6. Experimental study on durability improvement of fly ash concrete with durability improving admixture.

    Science.gov (United States)

    Quan, Hong-zhu; Kasami, Hideo

    2014-01-01

    In order to improve the durability of fly ash concrete, a series of experimental studies are carried out, where durability improving admixture is used to reduce drying shrinkage and improve freezing-thawing resistance. The effects of durability improving admixture, air content, water-binder ratio, and fly ash replacement ratio on the performance of fly ash concrete are discussed in this paper. The results show that by using durability improving admixture in nonair-entraining fly ash concrete, the compressive strength of fly ash concrete can be improved by 10%-20%, and the drying shrinkage is reduced by 60%. Carbonation resistance of concrete is roughly proportional to water-cement ratio regardless of water-binder ratio and fly ash replacement ratio. For the specimens cured in air for 2 weeks, the freezing-thawing resistance is improved. In addition, by making use of durability improving admixture, it is easier to control the air content and make fly ash concrete into nonair-entraining one. The quality of fly ash concrete is thereby optimized.

  7. Dynamic MR imaging of the temporomandibular joint arthrosis using spoiled GRASS sequence

    Energy Technology Data Exchange (ETDEWEB)

    Suenaga, Shigeaki; Hamamoto, Sadatoshi; Kawano, Kazunori (Kagoshima Univ. (Japan). Dental School) (and others)

    1994-07-01

    The purpose of this study was to quantitatively evaluate contrast enhancement effects of the posterior disk attachment in the temporomandibular joint arthrosis using dynamic MRI with bilateral surface coils. One hundred twenty-four temporomandibular joints in 96 symptomatic patients and 27 control subjects were examined with a spoiled GRASS pulse sequence (TR: 35 ms, TE: 8 ms, flip angle: 60deg). One sagittal scan was performed prior to injection, then 0.1 mmol/kg of Gd-DTPA was given as a rapid bolus injection, immediately after which scans were performed at 30 seconds intervals for a period of 5 minutes. Signal intensity (SI) was measured from the ROI of the posterior disk attachment region. The contrast enhancement effects may be calculated by SI ratio (SIR) = ( SI[sup post]-SI[sup pre])/SI[sup pre], where SI[sup post] and SI[sup pre] were the signal intensities after and before administration of contrast medium. The time intensity curve of SIR versus time after injection was obtained on each symptoms. Join pain group (85 joints) tended to show a rapid enhancement pattern, while control group (54 joints), joint sound or opening limitation group (39 joints), and asymptomatic group (68 joints) showed a relatively gradual enhancement pattern. The drop of SIR in four groups were hardly observed during examination. Mean peak SIR of control group, joint pain group, joint sound or opening limitation group, and asymptomatic group was 0.62[+-]0.24 (SD), 1.53[+-]0.69, 0.73[+-]0.38 and 0.78[+-]0.44 respectively. The mean SIR of pain group was significantly (P<0.001, t-test) higher than that of other groups. These results suggested that dynamic MRI of the temporomandibular joint may effectively depict the inflammatory changes of the posterior disk attachment. (author).

  8. Dynamic MR imaging of the temporomandibular joint arthrosis using spoiled GRASS sequence

    International Nuclear Information System (INIS)

    Suenaga, Shigeaki; Hamamoto, Sadatoshi; Kawano, Kazunori

    1994-01-01

    The purpose of this study was to quantitatively evaluate contrast enhancement effects of the posterior disk attachment in the temporomandibular joint arthrosis using dynamic MRI with bilateral surface coils. One hundred twenty-four temporomandibular joints in 96 symptomatic patients and 27 control subjects were examined with a spoiled GRASS pulse sequence (TR: 35 ms, TE: 8 ms, flip angle: 60deg). One sagittal scan was performed prior to injection, then 0.1 mmol/kg of Gd-DTPA was given as a rapid bolus injection, immediately after which scans were performed at 30 seconds intervals for a period of 5 minutes. Signal intensity (SI) was measured from the ROI of the posterior disk attachment region. The contrast enhancement effects may be calculated by SI ratio (SIR) = ( SI post -SI pre )/SI pre , where SI post and SI pre were the signal intensities after and before administration of contrast medium. The time intensity curve of SIR versus time after injection was obtained on each symptoms. Join pain group (85 joints) tended to show a rapid enhancement pattern, while control group (54 joints), joint sound or opening limitation group (39 joints), and asymptomatic group (68 joints) showed a relatively gradual enhancement pattern. The drop of SIR in four groups were hardly observed during examination. Mean peak SIR of control group, joint pain group, joint sound or opening limitation group, and asymptomatic group was 0.62±0.24 (SD), 1.53±0.69, 0.73±0.38 and 0.78±0.44 respectively. The mean SIR of pain group was significantly (P<0.001, t-test) higher than that of other groups. These results suggested that dynamic MRI of the temporomandibular joint may effectively depict the inflammatory changes of the posterior disk attachment. (author)

  9. Acetobacter aceti fast identification by Real Time PCR in spoiled wine samples

    Directory of Open Access Journals (Sweden)

    Attila Kántor

    2014-10-01

    Full Text Available Wine is a beverage that made from grape berries. However, without beneficial bacteria, we would not produce good wine. But very often wines contain acetic acid bacteria, which are undesirable in winemaking process. Acetic acid bacteria as known as a vinegar bacteria are Gram-negative, aerobic, rod-shaped and ubiquitous bacteria. This study was focused on species of acetic acid bacteria, specifically Acetobacter aceti that make spoilage in wine.The aim of our study was the identification of Acetobacter aceti in spoiled red wine samples, with plate dilution method on agar plates and using sensitive Real-time PCR (qPCR method. We cultivated Acetobacter aceti on GYC agar at 30°C, 48h. The one of main objective in the present work was the test fast, sensitive and reliable technique such as quantitative Real-time PCR and detecting the presence of Acetobacter aceti in wine samples with positive Acetobacteraceti control on amplification plot and melting curve. The next objective before  qPCR analysis was DNA extraction from wine samples incubated for one week at 28°C aerobically. We used five different red wine samples for this experiment: Alibernet 2013, Blaufränkisch 2013, Cabernet Sauvignon 2013, Dunaj 2012 and Saint-Laurent 2012. Next we extracted DNA from wine samples and from pure Acetobacter aceti CCM 3620T strain purchased from Czech collection of microorganisms in Brno. Susceptibility ofAcetobacter aceti was varied in different isolates from 102 to 107 CFU.mL-1. The number of Acetobacter cells on GYC medium ranged from 4.05 to 4.83log CFU.mL-1 in differentwine samples.The higher number of Acetobacter cells (4.83 log CFU.mL-1 was found in Cabernet Sauvignon 2013 wine.

  10. Coal Mining Spoil Heap Management as urban solid waste dump; Utilizacion de Escombreras de Carbon como Vertedero Controlado de Residuos Solidos Urbanos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    In the coordinated project DISPOSAL OF SOLID RESIDUES FROM COAL it is included the project Coal Mining Spoil Heap Management as Urban Solid Waste Dump. The main target of this project consisted of determining the viability of using coal mining spoil heaps, as controlled dubbish dump of urban solid wastes. The working plan to achieve this objective was composed of the following stages: 1. Urban solid wastes characterization. 2. Methodology to be followed for the selection of coal mining spoil heaps as controlled dump of urban solid wastes. 2.1 Classification and preliminary assessment of the possibility of using spoil heaps as urban solid waste dumps (APT/NON APT). 2.2 Realization of geological, geotechnical, hydrogeological and environmental studies applied to the spoil heaps classified as APT. 2.3 Analysis of the compatibility of the mining activity with the urban solid wastes dumped on the spoil heap. 2.4 Analysis of the use of coal mining wastes in the rubbish dump operative life. 3. Extraction of conclusions. The works were focused in the Leon province. As result of the researches we obtained the following results and conclusions: In the areas studied, only two emplacements are optima to dump urban solid wastes; spoil heap n. 13. Roguera Mine (Cinera-Matallana) and the open pit mine n. 4, Las Chaviadas, in Villablino. The active spoil heap use as controlled rubbish dump can cause, if not managed adequately, several coperating and occupational problems to the mine and to the company that manages the urban solid wastes. The abandoned spoil heap utilisation is difficult due to the problems that would arise when conditioning the site to be use as rubbish dump. The use of abandoned open pit mines, as controlled rubbish dump is feasible if geological, geotechnical, hydrogeological and environmental studies support it. It's possible the use of the coal mining wastes in the different operatives phases of the controlled rubbish dump. The evaluation methodology

  11. Remedial Investigation Report on Bear Creek Valley Operable Unit 2 (Rust Spoil Area, Spoil Area 1, and SY-200 Yard) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. Volume 1, Main text

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    This report on the BCV OU 2 at the Y-12 Plant, was prepared in accordance with requirements under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) for reporting the results of a site characterization for public review. It provides the Environmental Restoration Program with information about the results of the 1993 investigation. It includes information on risk assessments that have evaluated impacts to human health and the environment. Field activities included collection of subsurface soil samples, groundwater and surface water samples, and sediments and seep at the Rust Spoil Area (RSA), SY-200 Yard, and SA-1.

  12. Remedial Investigation Report on Bear Creek Valley Operable Unit 2 (Rust Spoil Area, Spoil Area 1, and SY-200 Yard) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. Volume 1, Main text

    International Nuclear Information System (INIS)

    1995-01-01

    This report on the BCV OU 2 at the Y-12 Plant, was prepared in accordance with requirements under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) for reporting the results of a site characterization for public review. It provides the Environmental Restoration Program with information about the results of the 1993 investigation. It includes information on risk assessments that have evaluated impacts to human health and the environment. Field activities included collection of subsurface soil samples, groundwater and surface water samples, and sediments and seep at the Rust Spoil Area (RSA), SY-200 Yard, and SA-1

  13. Chemical and isotopic tracing of underground water in relation with leaching of mine spoils, Nord-Pas-de-Calais Coal Basin (France)

    International Nuclear Information System (INIS)

    Denimal, S.; Tribovillard, N.; Meilliez, F.; Barbecot, F.; Dever, L.

    2001-01-01

    Coal mining activity in the Nord-Pas-de-Calais region (Northern France) has generated many mine spoils. The oxidation of the pyrite content of such coal shales and their leaching can be a source of sulfate pollution for the underlying chalk aquifer, i.e. the main drinking water resource of the region. Two sites of study have been retained: one in the free water table zone and the other in the confined water table zone. Samples from both mine spoils have been analyzed with respect to their carbon and sulfur content and a superficial leaching of these elements has been evidenced. Water has been sampled in piezometers and boreholes close to the mine spoils and also along natural flux lines. The use of sulfur isotopes as markers of the different sulfate sources has confirmed the spoils source but has permitted to identify another source in the second site which is the Tertiary gypsum-bearing Ostricourt sands. This study has shown also that in the confined water table zone, part of the exported sulfates is reduced. This bacterial reduction of sulfates is due to a joint leaching of both carbon and sulfur in the mine spoils. A self-purification phenomenon occurs when the chalk aquifer is confined beneath the Cenozoic cover. (J.S.)

  14. Durability of fired clay bricks containing granite powder

    Directory of Open Access Journals (Sweden)

    Xavier, G. C.

    2012-06-01

    Full Text Available Over the past few decades, hundreds of papers have been published on the benefits of including rock powder as a raw material in fired clay brick manufacture. Very little has been written, however, about the durability and long-term behaviour of the final product. As a rule, the ceramic bricks used in construction in developing countries are fired at low temperatures, which detracts from their mechanical performance. This is particularly visible in harsh environmental conditions, where weathering causes severe deterioration. The present paper describes the impact of weathering on clay bricks containing from 0 to 10% granite powder, an industrial by-product. The specimens were fired at 500, 700 or 900 ºC and subsequently exposed to natural environmental conditions or accelerated laboratory weathering. Their physical and mechanical properties were evaluated to determine the effect of the composition of raw materials on fired clay product durability.

    En las últimas décadas se han publicado cientos de artículos sobre las ventajas de incluir polvo de roca como materia prima en la fabricación de los ladrillos cerámicos. Sin embargo, la durabilidad y el comportamiento a largo plazo del producto final han sido objeto de pocas investigaciones. Por lo general, los ladrillos cerámicos empleados en la construcción en los países en vías de desarrollo se cuecen a temperaturas bajas, lo que impide el desarrollo de sus propiedades mecánicas. Esto queda especialmente patente cuando las condiciones ambientales son severas, en cuyo caso la meteorización puede provocar un deterioro importante. En este artículo se describe el efecto de la meteorización en ladrillos cerámicos que incorporaban entre un 0 y un 10% de polvo de granito, que es un derivado industrial. Las probetas se cocieron a 500, 700 o 900 °C y luego se sometieron a condiciones ambientales naturales o a un proceso de laboratorio de meteorización acelerada. Se evaluaron sus

  15. Comparison of two non-linear prediction techniques for estimation of some intact rock parameters

    Science.gov (United States)

    Yagiz, Saffet; Sezer, Ebru; Gokceoglu, Candan

    2010-05-01

    Traditionally, some regression techniques have been used for prediction of some rock properties using their physical and index parameters. For this purpose, numerous models and empirical equations have been proposed in the literature to predict the uniaxial compressive strength (UCS) and the elasticity modules (E) of intact rocks. Two of the powerful modeling techniques for this purpose is that the non-linear multivariable regression (NLMR) and the artificial neural networks (ANN). The aim of the study is to develop some models to predict the UCS and E of rocks using predictive tools. Further, to investigate whether two-cycle or four-cycle slake durability index as an input parameter into the models demonstrates better characterization capacity for carbonate rocks, and also, to introduce two new performance ranking approaches via performance index and degree of consistency to select the best predictor among the developed models, complex and their rank cannot be solved by using a simple ranking approach introduced previously in the literature. To obtain these purposes, seven type of carbonate rocks was collected from quarries in the southwestern Turkey and their properties including the uniaxial compressive strength, the Schmidt hammer, effective porosity, dry unit weight, P-wave velocity, the modulus of elasticity, and both two and four-cycle of slake durability indices were determined for establishing a dataset used for construction of the models. As a result of this study, it is found that four-cycle slake durability index exhibits more characterization capacity for carbonate rock in the models in comparison with two-cycle slake durability index. Also, the ANN models having two outputs (UCS and E) exhibit more accurate estimation capacity than the NLMR models. In addition, newly introduced performance ranking index and degree of consistency may be accepted as useful indicators to be considered to obtain the performance ranking of complex models. Consequently

  16. Bioavailability and microbial adaptation to elevated levels of uranium in an acid, organic topsoil forming on an old mine spoil

    International Nuclear Information System (INIS)

    Joner, E.J.; Munier-Lamy, C.; Gouget, B.

    2007-01-01

    An old mine spoil at a 19. century mining site with considerable residues of uranium (400-800 mg U/kg) was investigated with respect to U concentrations in soil and plants and tolerance to U in the soil microbial community in order to describe the bioavailability of U. Measurements of soil fractions representing water-soluble U, easily exchangeable U, and U bound to humidified organic matter showed that all fractions contained elevated concentrations of U. Plant U concentrations were only 10 times higher at the mine spoil site compared to the reference site (3 mg U/kg vs 0.3 mg U/kg), while the most easily available soil fractions contained 0.18 to 0.86 mg U/kg soil at the mine spoil. An eco-toxicity bioassay using incorporation of [ 3 H]thymidine into the indigenous microbial communities of the two soils in the presence of increasing U concentrations showed that microorganisms at the mining site were sensitive to U but also that they had acquired a substantial tolerance toward U (EC50, the effective concentration reducing activity by 50% of UO 2 -citrate was similar to 120 μM as compared to 30 μM in the reference soil). In the assay, more than 40% of the microbial activity was maintained in the presence of 1 mM UO 2 -citrate versus 3% in the reference soil. We conclude that U-enriched mining waste can contain sufficiently elevated concentrations of bio-available U to affect indigenous microorganisms and that bio-available U imposes a selection pressure that favors the development of a highly uranium-tolerant microbial community, while plant uptake of U remains low. (authors)

  17. Comparative growth behaviour and leaf nutrient status of native trees planted on mine spoil with and without nutrient amendment

    Energy Technology Data Exchange (ETDEWEB)

    Singh, A.; Singh, J.S. [Banaras Hindu University, Varanasi (India). Dept. of Botany

    2001-07-01

    The effect of nutrient amendment on growth of nine indigenous tree species planted on coal mine spoil was studied. Greater growth in fertilized plots was accompanied by greater foliar N and P concentrations in all species. The response to fertilization varied among species and was greater in non-leguminous than in leguminous species. Furthermore, leguminous species exhibited higher growth rates compared to non-leguminous species. Acacia catechu, Dalbergia sissoo, Gmelina arborea and Azadirachta indica fitted the elastic similarity model of tree growth; whereas Pongamia pinnata and Phyllanthus emblica followed the constant stress model. Tectona grandis was the only species which fitted the geometric similarity model.

  18. Microcracking and durability of high strength concretes

    International Nuclear Information System (INIS)

    Yssorche, M.P.

    1995-07-01

    Durability of 28 days compressive strength concrete of 20 to 120 MPa has been studied. The ability of concrete to transport aggressive agents has been determined for four properties: the air permeability, the chloride diffusivity, the water absorption and the carbonation. A chloride migration test for high and very high strength concrete (HSC and VHSC) has been built. The relationship between transport properties and the compressive strength after one and 28 days of humid curing has always the same shape: transport decreases when strength increases. However, transport properties often vary in the ordinary concrete field. Beyond, the domain is much more limited. The relationship between transport properties and strength valid for ordinary concrete can not be simply extrapolated for HSC and VHSC. To determine the part of microcracking of HSC and VHSC, concrete behaviour stored in two mediums has been studied: the ones shaming the storing condition of concrete in auto-desiccation, the others reproducing the storing conditions of concrete in desiccation. Auto-desiccation (measuring relative humidity at balance) and desiccation (measuring mass losses) have been showed. Microcracks and shrinkage strains have been measured. It has been showed that auto-desiccation microcracks proving in HSC or VHSC don't question the durability. Microcracks, as for permeability, do not develop between 28 days and one year. On the contrary, desiccation microcracks observed in HSC and VHSC, increase with transport properties between 28 days and 1.5 year. Thus, a bulk concrete is always more durable than a cover concrete. At last, the good influence of increase of curing of 1 to 28 days on the transport of all concretes has been emphasized. (author)

  19. Probabilistic assessment of the durability performance of concrete structures

    OpenAIRE

    Ferreira, Rui Miguel; Jalali, Said; Gjørv, Odd E.

    2004-01-01

    In recent years, much research work has been carried out in order to obtain a more controlled durability and long-term performance of concrete structures in chloride containing environments. In particular, the development of new procedures for probability-based durability design has proved to be very valuable. In order to provide more data and experience with probability-based durability design, two relatively new concrete structures in Norwegian harbours were selected for detailed investigat...

  20. DURABILITY OF ASPHALT CONCRETE MIXTURES USING DOLOMITE AGGREGATES

    Directory of Open Access Journals (Sweden)

    Imad Al-Shalout

    2015-12-01

    Full Text Available This study deals with the durability of asphalt concrete, including the effects of different gradations, compaction temperatures and immersion time on the durability potential of mixtures. The specific objectives of this study are: to investigate the effect of compaction temperature on the mechanical properties of asphalt concrete mixtures; investigate the effect of bitumen content and different aggregate gradations on the durability potential of bituminous mixtures.

  1. Durability of cemented waste in repository and under simulated conditions

    International Nuclear Information System (INIS)

    Dragolici, F.; Nicu, M.; Lungu, L.; Turcanu, C.; Rotarescu, Gh.

    2000-01-01

    The Romanian Radioactive Waste National Repository for low level and intermediate level radioactive waste was built in Baita - Bihor county, in an extinct uranium exploitation. The site is at 840 m above sea level and the host rock is crystalline with a low porosity, a good chemical homogeneity and impermeability, keeping these qualities over a considerable horizontal and vertical spans. To obtain the experimental data necessary for the waste form and package characterization together with the back-filling material behaviour in the repository environment, a medium term research programme (1996 - 2010) was implemented. The purpose of this experimental programme is to obtain a part of the data base necessary for the approach of medium and long term assessment of the safety and performance of Baita - Bihor Repository. The programme will provide: a deeper knowledge of the chemical species and reaction mechanisms, the structure, properties and performances of the final products. For safety reasons the behaviour of waste package, which is a main barrier, must be properly known in terms of long term durability in real repository conditions. Characterization of the behaviour includes many interactions between the waste package itself and the surrounding near field conditions such as mineralogy, hydrogeology and groundwater chemistry. To obtain a more deeper knowledge of the species and physical-chemical reactions participating in the matrix formation, as well as their future behaviour during the disposal period, a thorough XRD study started in 1998. For Romanian Radioactive Waste National Repository (DNDR) Baita - Bihor the following steps are planned for the conditioned waste matrix characterization in simulated and real conditions: - preparation and characterization of normal reference matrices based on different cement formulations; - preparation of reference simulated sludge cemented matrices containing iron hydroxide and iron phosphate; - selection of real and

  2. Space Weathering of Rocks

    Science.gov (United States)

    Noble, Sarah

    2011-01-01

    Space weathering discussions have generally centered around soils but exposed rocks will also incur the effects of weathering. On the Moon, rocks make up only a very small percentage of the exposed surface and areas where rocks are exposed, like central peaks, are often among the least space weathered regions we find in remote sensing data. However, our studies of weathered Ap 17 rocks 76015 and 76237 show that significant amounts of weathering products can build up on rock surfaces. Because rocks have much longer surface lifetimes than an individual soil grain, and thus record a longer history of exposure, we can study these products to gain a deeper perspective on the weathering process and better assess the relative impo!1ance of various weathering components on the Moon. In contrast to the lunar case, on small asteroids, like Itokowa, rocks make up a large fraction of the exposed surface. Results from the Hayabusa spacecraft at Itokowa suggest that while the low gravity does not allow for the development of a mature regolith, weathering patinas can and do develop on rock surfaces, in fact, the rocky surfaces were seen to be darker and appear spectrally more weathered than regions with finer materials. To explore how weathering of asteroidal rocks may differ from lunar, a set of ordinary chondrite meteorites (H, L, and LL) which have been subjected to artificial space weathering by nanopulse laser were examined by TEM. NpFe(sup 0) bearing glasses were ubiquitous in both the naturally-weathered lunar and the artificially-weathered meteorite samples.

  3. Durability of resin-dentin bonds.

    Science.gov (United States)

    Shono, Y; Terashita, M; Shimada, J; Kozono, Y; Carvalho, R M; Russell, C M; Pashley, D H

    1999-01-01

    The purpose of this study was to determine if the durability of resin-dentin bonds could be evaluated more quickly if the bond specimen was divided into 1 x 1 x 8 mm beams incubated at 37 degrees C for a 90-day period. Extracted human third molars were prepared for bonding by removing the occlusal surface near the dento-enamel junction (superficial dentin group) or near the pulp (deep dentin group). The teeth were bonded either with MacBond, One Step or Clearfil Liner Bond 2, and then builtup to form a flat resin composite crown. After 24 hours in water, each buildup was vertically divided into slabs 1 mm thick, the top half of which was resin, with the bottom half as dentin. Each slab was then vertically sectioned at 1-mm increments to create 1 x 1 x 8-mm beams of resin-bonded dentin. They were incubated for 1 day or 90 days at 37 degrees C, followed by measurement of the tensile bond strengths. The results were analyzed by the Least-Squares Means method at the 95% confidence level. MacBond gave the highest (p durability of resin-dentin bonds.

  4. Durability of composites in a marine environment

    CERN Document Server

    Rajapakse, Yapa

    2014-01-01

    Composites are widely used in marine applications. There is considerable experience of glass reinforced resins in boats and ships but these are usually not highly loaded. However, for new areas such as offshore and ocean energy there is a need for highly loaded structures to survive harsh conditions for 20 years or more. High performance composites are therefore being proposed. This book provides an overview of the state of the art in predicting the long term durability of composite marine structures. The following points are covered: •       Modelling water diffusion •       Damage induced by water •       Accelerated testing •       Including durability in design •       In-service experience. This is essential reading for all those involved with composites in the marine industry, from initial design and calculation through to manufacture and service exploitation. It also provides information unavailable elsewhere on the mechanisms involved in degradation and how to t...

  5. Durability of high performance concrete in seawater

    International Nuclear Information System (INIS)

    Amjad Hussain Memon; Salihuddin Radin Sumadi; Rabitah Handan

    2000-01-01

    This paper presents a report on the effects of blended cements on the durability of high performance concrete (HPC) in seawater. In this research the effect of seawater was investigated. The specimens were initially subjected to water curing for seven days inside the laboratory at room temperature, followed by seawater curing exposed to tidal zone until testing. In this study three levels of cement replacement (0%, 30% and 70%) were used. The combined use of chemical and mineral admixtures has resulted in a new generation of concrete called HPC. The HPC has been identified as one of the most important advanced materials necessary in the effort to build a nation's infrastructure. HPC opens new opportunities in the utilization of the industrial by-products (mineral admixtures) in the construction industry. As a matter of fact permeability is considered as one of the fundamental properties governing the durability of concrete in the marine environment. Results of this investigation indicated that the oxygen permeability values for the blended cement concretes at the age of one year are reduced by a factor of about 2 as compared to OPC control mix concrete. Therefore both blended cement concretes are expected to withstand in the seawater exposed to tidal zone without serious deterioration. (Author)

  6. Durability of coconut shell powder (CSP) concrete

    Science.gov (United States)

    Leman, A. S.; Shahidan, S.; Senin, M. S.; Shamsuddin, S. M.; Anak Guntor, N. A.; Zuki, S. S. Mohd; Khalid, F. S.; Azhar, A. T. S.; Razak, N. H. S.

    2017-11-01

    The rising cost of construction in developing countries like Malaysia has led concrete experts to explore alternative materials such as coconut shells which are renewable and possess high potential to be used as construction material. Coconut shell powder in varying percentages of1%, 3% and 5% was used as filler material in concrete grade 30 and evaluated after a curing period of 7 days and 28days respectively. Compressive strength, water absorption and carbonation tests were conducted to evaluate the strength and durability of CSP concrete in comparison with normal concrete. The test results revealed that 1%, 3% and 5% of CSP concrete achieved a compressive strength of 47.65 MPa, 45.6 MPa and 40.55% respectively. The rate of water absorption of CSP concrete was recorded as 3.21%, 2.47%, and 2.73% for 1%, 3% and 5% of CSP concrete respectively. Although CSP contained a carbon composition of 47%, the carbonation test showed that CSP no signs of carbon were detected inside the concrete. To conclude, CSP offers great prospects as it demonstrated relatively high durability as a construction material.

  7. Durability of cement and geopolimer composites

    Science.gov (United States)

    Błaszczyński, T.; Król, M.

    2017-10-01

    Concrete structures are constantly moving in the direction of improving the durability. This main feature depends on many factors, which are the composition of concrete mix, the usage of additives and admixtures and the place, where material will work and carry the load. The introduction of new geopolymer binders for geopolymer structures adds a new aspect that is type of used activator. This substance with strongly alkaline reaction is divided because of the physical state, the alkaline degree and above all the chemical composition. Taking into account, that at present the geopolymer binders are made essentially from waste materials or by products from the combustion of coal or iron ore smelting, unambiguous determination of the effect of the activator on the properties of the geopolymer material requires a number of trials, researches and observation. This paper shows the influence of the most alkaline activators on the basic parameters of the durability of geopolymer binders. In this study there were used a highly alkaline hydroxides, water glasses and granules, which are waste materials in a variety of processes taking place in a chemical plants. As the substrate of geopolymer binders there were used fly ash which came from coal and high calcium ash from the burning of lignite.

  8. Durability of thin-walled concrete structures

    International Nuclear Information System (INIS)

    Salomon, M.; Gallias, J.L.

    1991-01-01

    The aim of the present document is to draw up a survey of knowledge of the problems of ageing of reinforced concrete shell structure atmospheric coolers. The exposure conditions are particularly favourable to the induction and development of degradation which, because of the thinness of the reinforced concrete can compromise the stability and the durability of coolers. The study will be axed on the link between the specific characteristics of coolers from the point of view of operation, design and environment, also the durability of reinforced concrete. The set of factors exerting their influence on the reinforced concrete of the shell structure (condensates, rain water, temperature and humidity gradients, dynamic loads, weathering, etc.) is particularly complex. The principal degradation reactions involved are classified according to the chemical and physical action on concrete and on the reinforcement. Particular emphasis is placed on the analysis of degradation processes and the influence of the characteristics of the materials and of the medium. The aim is to determine the mechanisms which present the greatest risk for coolers. The interaction between the degradation to concrete and the change in mechanical characteristics is also studied [fr

  9. Evaluation of the spoilage potential of bacteria isolated from spoiled raw salmon (Salmo salar) fillets stored under modified atmosphere packaging.

    Science.gov (United States)

    Macé, Sabrina; Joffraud, Jean-Jacques; Cardinal, Mireille; Malcheva, Mariya; Cornet, Josiane; Lalanne, Valérie; Chevalier, Frédérique; Sérot, Thierry; Pilet, Marie-France; Dousset, Xavier

    2013-01-01

    The spoilage potential of eight bacterial groups/species (Serratia spp., Hafnia alvei, Brochothrix thermosphacta, Carnobacterium maltaromaticum, Shewanella baltica, Lactococcus piscium, Photobacterium phosphoreum, "other Enterobacteriaceae" [containing one strain of Moellerella sp., Morganella sp. and Pectobacterium sp.]) isolated from spoiled raw salmon fillets stored under modified atmosphere packaging (MAP) was evaluated by inoculation into sterile raw salmon cubes followed by storage for 12days at 8°C. Microbial growth and sensory changes were monitored during the storage period. The dominant spoilage bacteria were C. maltaromaticum, H. alvei and P. phosphoreum. In order to further characterize their spoilage potential and to study the effect of their interactions, each of these 3 specific spoilage organisms (SSO) and two mixed-cultures, C. maltaromaticum/H. alvei and C. maltaromaticum/P. phosphoreum were tested in the sterile salmon model system using a combination of complementary methods: molecular (PCR-TTGE), sensory, chemical and conventional microbiological analyses. It was concluded that, in the mixed-culture inoculated samples, the dominant species determined the spoilage characteristics. The volatile fraction of P. phosphoreum inoculated samples was analyzed by solid-phase microextraction (SPME) followed by gas chromatography coupled to mass spectrometry (GC-MS). Among the specific volatile compounds present on P. phosphoreum spoiled inoculated samples, acetic acid was correlated with sensory analysis and can be proposed as a raw salmon spoilage marker. Copyright © 2012 Elsevier B.V. All rights reserved.

  10. Radiation-induced enhancement of antifungal activity of chitosan on fruit-spoiling fungi during postharvest storage

    International Nuclear Information System (INIS)

    Diep, Tran Bang; Lam, Nguyen Duy; Quynh, Tran Minh; Kume, Tamikazu

    2001-01-01

    Experiment conducted four fruit-spoiling fungal strains that were isolated from spoilt fruits (mango and dragon fruit) and were identified as follows: Fusarium dimerum Penzig, Aspergillus nidulans Wint, Aspergillus fumigatus Fresenius and Aspergillus japonicus Saito. Chitosan samples with various deacetylation degree (70-99%) were irradiated at doses ranging from 20 to 200kGy, then were supplemented to liquid medium for growth of fungi. We have found that chitosan possesses not only well known antibacterial activity but also the antifungal one on fruit-spoiling fungi. Method of fungal cultivation using liquid medium showed that it has higher sensitivity compared with the cultivation on agar plate, so we recommend this method should be used for evaluation of antimicrobial activity of chitosan. Our study also indicated that deacetylation degree of chitosan clearly affects its antifungal activity, the higher the deacetylation of chitosan, stronger antifungal activity can be observed. This finding recommends the use of chitosan with higher deacetylation for fruit coating and other pharmacology utilization. Results from the minimal inhibitory concentrations (MIC) on fungal growth showed that radiation treatment increased antifungal activity of chitosan and dose of 60kGy gave highest activity. (author)

  11. Radiation-induced enhancement of antifungal activity of chitosan on fruit-spoiling fungi during postharvest storage

    Energy Technology Data Exchange (ETDEWEB)

    Diep, Tran Bang; Lam, Nguyen Duy; Quynh, Tran Minh [Institute for Nuclear Science and Technique-VAEC, Hanoi (Viet Nam); Kume, Tamikazu [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    2001-03-01

    Experiment conducted four fruit-spoiling fungal strains that were isolated from spoilt fruits (mango and dragon fruit) and were identified as follows: Fusarium dimerum Penzig, Aspergillus nidulans Wint, Aspergillus fumigatus Fresenius and Aspergillus japonicus Saito. Chitosan samples with various deacetylation degree (70-99%) were irradiated at doses ranging from 20 to 200kGy, then were supplemented to liquid medium for growth of fungi. We have found that chitosan possesses not only well known antibacterial activity but also the antifungal one on fruit-spoiling fungi. Method of fungal cultivation using liquid medium showed that it has higher sensitivity compared with the cultivation on agar plate, so we recommend this method should be used for evaluation of antimicrobial activity of chitosan. Our study also indicated that deacetylation degree of chitosan clearly affects its antifungal activity, the higher the deacetylation of chitosan, stronger antifungal activity can be observed. This finding recommends the use of chitosan with higher deacetylation for fruit coating and other pharmacology utilization. Results from the minimal inhibitory concentrations (MIC) on fungal growth showed that radiation treatment increased antifungal activity of chitosan and dose of 60kGy gave highest activity. (author)

  12. Quantitative determination of sediment movement at the landward spoil ground in the Yangtze Estuary with radioactive tracer

    International Nuclear Information System (INIS)

    Li Zhangsu

    1993-01-01

    A radioactive tracer experiment was carried out at the landward spoil ground of the North Passage in the Yangtze Estuary in June of 1991. The scandium-46 was selected as the tracer, the total activity released is 17.95 x 10 10 Bq(4.85 Ci), the amount of the scandium-46 glass is 495 g. The purpose of the experiment is to determine the sediment movement direction, path, velocity and transport rate. The experiment provides the direct evidence for using the landward spoil ground in the future. The experiment results show the sediment movement was governed by the ebb tide current during the period of middle and neap tides when the radioactive tracer was injected both on the flood and ebb tides, and the sediment moved from the injection points to the middle of the North Passage near the navigation buoy No. 269. The direction of the sediment movement is 110 degree, the particle velocity is 758 m/d, and the sediment transport rate per unit width is 47.8 m 3 /md

  13. Environmental risk evaluation of the use of mine spoils and treated sewage sludge in the ecological restoration of limestone quarries

    Science.gov (United States)

    Jordán, M. M.; Pina, S.; García-Orenes, F.; Almendro-Candel, M. B.; García-Sánchez, E.

    2008-07-01

    The ecologic restoration criteria in areas degraded from extraction activities require making use of their mine spoils. These materials do not meet fertility conditions to guarantee restoration success and therefore, need the incorporation of organic amendments to obtain efficient substratum. Reducing the deficiencies in the organic material and restoration material nutrients with the contribution of treated sewage sludge is proposed in this work. This experiment was based on a controlled study using columns. The work was conducted with two mine spoils, both very rich in calcium carbonate. The first mineral, of poor quality, came from the formation of aggregates of crushed limestone ( Z). The other residual material examined originated in limestone extraction, formed by the levels of interspersed non-limestone materials and the remains of stripped soils ( D). Two treatments were undertaken (30,000 and 90,000 kg/ha of sewage sludge), in addition to a control treatment. The water contribution was carried out with a device that simulated either short-duration rain or a flooding irrigation system in order to cover the surface and then percolate through the soil. The collection of leached water took place 24 h after the applications. Different parameters of the leached water were determined, including pH, electrical conductivity, nitrate anions, ammonium, phosphates, sulphates and chlorides. The values obtained for each irrigation application are discussed, and the nitrate values obtained were very elevated.

  14. Rocks, Clays, Water, and Salts: Highly Durable, Infinitely Rechargeable, Eminently Controllable Thermal Batteries for Buildings

    Directory of Open Access Journals (Sweden)

    Alan W. Rempel

    2013-01-01

    Full Text Available Materials that store the energy of warm days, to return that heat during cool nights, have been fundamental to vernacular building since ancient times. Although building with thermally rechargeable materials became a niche pursuit with the advent of fossil fuel-based heating and cooling, energy and climate change concerns have sparked new enthusiasm for these substances of high heat capacity and moderate thermal conductivity: stone, adobe, rammed earth, brick, water, concrete, and more recently, phase-change materials. While broadly similar, these substances absorb and release heat in unique patterns characteristic of their mineralogies, densities, fluidities, emissivities, and latent heats of fusion. Current architectural practice, however, shows little awareness of these differences and the resulting potential to match materials to desired thermal performance. This investigation explores that potential, illustrating the correspondence between physical parameters and thermal storage-and-release patterns in direct-, indirect-, and isolated-gain passive solar configurations. Focusing on heating applications, results demonstrate the superiority of water walls for daytime warmth, the tunability of granite and concrete for evening warmth, and the exceptional ability of phase-change materials to sustain near-constant heat delivery throughout the night.

  15. Rock kinoekraanil / Katrin Rajasaare

    Index Scriptorium Estoniae

    Rajasaare, Katrin

    2008-01-01

    7.-11. juulini kinos Sõprus toimuval filminädalal "Rock On Screen" ekraanile jõudvatest rockmuusikuid portreteerivatest filmidest "Lou Reed's Berlin", "The Future Is Unwritten: Joe Strummer", "Control: Joy Division", "Hurriganes", "Shlaager"

  16. Rock Equity Holdings, LLC

    Science.gov (United States)

    The EPA is providing notice of an Administrative Penalty Assessment in the form of an Expedited Storm Water Settlement Agreement against Rock Equity Holdings, LLC, for alleged violations at The Cove at Kettlestone/98th Street Reconstruction located at 3015

  17. Pop & rock / Berk Vaher

    Index Scriptorium Estoniae

    Vaher, Berk, 1975-

    2001-01-01

    Uute heliplaatide Redman "Malpractice", Brian Eno & Peter Schwalm "Popstars", Clawfinger "A Whole Lot of Nothing", Dario G "In Full Color", MLTR e. Michael Learns To Rock "Blue Night" lühitutvustused

  18. Solid as a rock

    International Nuclear Information System (INIS)

    Pincus, H.J.

    1984-01-01

    Recent technologic developments have required a more comprehensive approach to the behavior of rock mass or rock substance plus discontinuities than was adequate previously. This work considers the inherent problems in such operations as the storage of hot or cold fluids in caverns and aquifers, underground storage of nuclear waste, underground recovery of heat from hydrocarbon fuels, tertiary recovery of oil by thermal methods, rapid excavation of large openings at shallow to great depths and in hostile environments, and retrofitting of large structures built on or in rock. The standardization of methods for determining rock properties is essential to all of the activities described, for use not only in design and construction but also in site selection and post-construction monitoring. Development of such standards is seen as a multidisciplinary effort

  19. Innovative rock bed construction

    Energy Technology Data Exchange (ETDEWEB)

    Cook, J.

    1983-06-01

    A general discussion of the use of rock beds for heating and cooling thermal storage is particularized for design and construction in Phoenix, Arizona. The rock bed parameters for three two-story condominium apartments constructed in 1982 are discussed, including sizing criteria and original construction details. A revised construction method using gabions that are self-supporting chain link cylinders provided a much more economical construction method as well as other advantages of speed and structural flexibility.

  20. Rock and Soil Rheology

    Science.gov (United States)

    Cristescu, Nicolae; Ene, Horia I.

    The first part of the volume contains theoretical considerations of the physical properties of soils and rocks. Articles on the mechanical and kinematical behavior of rocks as well as mathematical models are the base for the understanding of the physical properties of natural systems. In the second part articles deal with experiments and applications regarding creep deformation of clay, underground cavities, tunnels and deformation of sand and lamistrine sediments.

  1. Basic rocks in Finland

    International Nuclear Information System (INIS)

    Piirainen, T.; Gehoer, S.; Iljina, M.; Kaerki, A.; Paakkola, J.; Vuollo, J.

    1992-10-01

    Basic igneous rocks, containing less than 52% SiO 2 , constitute an important part of the Finnish Archaean and Proterozoic crust. In the Archaean crust exist two units which contain the majority of the basic rocks. The Arcaean basic rocks are metavolcanics and situated in the Greenstone Belts of Eastern Finland. They are divided into two units. The greenstones of the lower one are tholeiites, komatiites and basaltic komatiites. The upper consists of bimodal series of volcanics and the basic rocks of which are Fe-tholeiites, basaltic komatiites and komatiites. Proterozoic basic rocks are divided into seven groups according to their ages. The Proterozoic igneous activity started by the volominous basic magmatism 2.44 Ga ago. During this stage formed the layered intrusions and related dykes in the Northern Finland. 2.2 Ga old basic rocks are situated at the margins of Karelian formations. 2.1 Ga aged Fe-tholeiitic magmatic activity is widespread in Eastern and Northern Finland. The basic rocks of 1.97 Ga age group are met within the Karelian Schist Belts as obducted ophiolite complexes but they occur also as tholeiitic diabase dykes cutting the Karelian schists and Archean basement. The intrusions and the volcanics of the 1.9 Ga old basic igneous activity are mostly encountered around the Granitoid Complex of Central Finland. Subjotnian, 1.6 Ga aged tholeiitic diabases are situated around the Rapakivi massifs of Southern Finland, and postjotnian, 1.2 Ga diabases in Western Finland where they form dykes cutting Svecofennian rocks

  2. A sneaky kettle : Emotionally durable design explored in practice

    NARCIS (Netherlands)

    Van Krieken, B.; Desmet, P.M.A.; Aliakseyeu, D.; Mason, J.

    2012-01-01

    Emotionally durable design is a genre of sustainable design that aims at reducing consumption and waste by enhancing the durability of the relationship established between users and products. Several design strategies and theories have been published on this topic; nevertheless, it is still

  3. Influence Of Density On The Durabilities Of Three Ghanaian Timbers ...

    African Journals Online (AJOL)

    Review of factors influencing wood durability shows although density varies depending on trunk position, its role appears controversial for many timber species. Thus, for the first time, the influence of density on the durability of three Ghanaian timbers (Nauclea diderrichii (de Wild.) Merr., Nesogordonia papaverifera (A. Chev ...

  4. Durability studies on the high calcium flyash based GPC ...

    African Journals Online (AJOL)

    Durability studies on the high calcium flyash based GPC. ... International Journal of Engineering, Science and Technology ... Most of the studies reported is about the development of low calcium flyash based GPC only and and that too mostly on achieving the compressive strength and not much on its durability related ...

  5. Coating WPC's using co-extrusion to improve durability

    Science.gov (United States)

    Nicole M. Stark; Laurent M. Matuana

    2007-01-01

    Wood-plastic composites (WPCs) have been gaining market share in the residential construction industry as lumber for decking, roof tiles, and siding. The durability of these materials in exterior environments is just beginning to be understood. Current research suggests that controlling moisture absorption by the composite is key to improving durability. Methods to...

  6. Monetary Policy with Sectoral Linkages and Durable Goods

    DEFF Research Database (Denmark)

    Petrella, Ivan; Rossi, Raffaele; Santoro, Emiliano

    We study the normative implications of a New Keynesian model featuring intersectoral trade of intermediate goods between two sectors that produce durables and non-durables. The interplay between durability and sectoral production linkages fundamentally alters the intersectoral stabilization trade......-off as it emerges in otherwise standard two-sector models. We compare the welfare properties of a timeless-perspective monetary policy with the performance of simple instrumental rules that adjust the policy rate in response to the output gap and alternative aggregate measures of final goods price inflation....... Aggregating durable and non-durable inflation depending on the relative degrees of sectoral price stickiness may induce a severe bias. Input materials attenuate the response of sectoral inflations to movements in the real marginal costs, so that the effective slopes of the sectoral supply schedules...

  7. Sustainability and durability analysis of reinforced concrete structures

    Science.gov (United States)

    Horáková, A.; Broukalová, I.; Kohoutková, A.; Vašková, J.

    2017-09-01

    The article describes an assessment of reinforced concrete structures in terms of durability and sustainable development. There is a short summary of findings from the literature on evaluation methods for environmental impacts and also about corrosive influences acting on the reinforced concrete structure, about factors influencing the durability of these structures and mathematical models describing the corrosion impacts. Variant design of reinforced concrete structure and assessment of these variants in terms of durability and sustainability was performed. The analysed structure was a concrete ceiling structure of a parking house for cars. The variants differ in strength class of concrete and thickness of concrete slab. It was found that in terms of durability and sustainable development it is significantly preferable to use higher class of concrete. There are significant differences in results of concrete structures durability for different mathematical models of corrosive influences.

  8. Durability of Silicate Glasses: An Historical Approach

    Energy Technology Data Exchange (ETDEWEB)

    Farges, Francois; /Museum Natl. Hist. Natur. /Stanford U., Geo. Environ. Sci.; Etcheverry, Marie-Pierre; /Marne la Vallee U.; Haddi, Amine; /Marne la Valle U.; Trocellier,; /Saclay; Curti, Enzo; /PSI, Villigen; Brown, Gordon E., Jr.; /SLAC, SSRL

    2007-01-02

    We present a short review of current theories of glass weathering, including glass dissolution, and hydrolysis of nuclear waste glasses, and leaching of historical glasses from an XAFS perspective. The results of various laboratory leaching experiments at different timescales (30 days to 12 years) are compared with results for historical glasses that were weathered by atmospheric gases and soil waters over 500 to 3000 years. Good agreement is found between laboratory experiments and slowly leached historical glasses, with a strong enrichment of metals at the water/gel interface. Depending on the nature of the transition elements originally dissolved in the melt, increasing elemental distributions are expected to increase with time for a given glass durability context.

  9. Bonding efficiency and durability: current possibilities

    Directory of Open Access Journals (Sweden)

    Adriana Bona MATOS

    2017-08-01

    Full Text Available Abstract Bonding plays a major role in dentistry nowadays. Dental adhesives are used in association with composites to solve many restorative issues. However, the wide variety of bonding agents currently available makes it difficult for clinicians to choose the best alternative in terms of material and technique, especially when different clinical situations are considered. Moreover, although bonding agents allow for a more conservative restorative approach, achieving a durable adhesive interface remains a matter of concern, and this mainly due to degradation of the bonding complex in the challenging oral environment. This review aims to present strategies that are being used or those still in development which may help to prevent degradation. It is fundamental that professionals are aware of these strategies to counteract degradation as much as possible. None of them are efficient to completely solve this problem, but they certainly represent reasonable alternatives to increase the lifetime of adhesive restorations.

  10. Glass Durability Modeling, Activated Complex Theory (ACT)

    International Nuclear Information System (INIS)

    CAROL, JANTZEN

    2005-01-01

    The most important requirement for high-level waste glass acceptance for disposal in a geological repository is the chemical durability, expressed as a glass dissolution rate. During the early stages of glass dissolution in near static conditions that represent a repository disposal environment, a gel layer resembling a membrane forms on the glass surface through which ions exchange between the glass and the leachant. The hydrated gel layer exhibits acid/base properties which are manifested as the pH dependence of the thickness and nature of the gel layer. The gel layer has been found to age into either clay mineral assemblages or zeolite mineral assemblages. The formation of one phase preferentially over the other has been experimentally related to changes in the pH of the leachant and related to the relative amounts of Al +3 and Fe +3 in a glass. The formation of clay mineral assemblages on the leached glass surface layers ,lower pH and Fe +3 rich glasses, causes the dissolution rate to slow to a long-term steady state rate. The formation of zeolite mineral assemblages ,higher pH and Al +3 rich glasses, on leached glass surface layers causes the dissolution rate to increase and return to the initial high forward rate. The return to the forward dissolution rate is undesirable for long-term performance of glass in a disposal environment. An investigation into the role of glass stoichiometry, in terms of the quasi-crystalline mineral species in a glass, has shown that the chemistry and structure in the parent glass appear to control the activated surface complexes that form in the leached layers, and these mineral complexes ,some Fe +3 rich and some Al +3 rich, play a role in whether or not clays or zeolites are the dominant species formed on the leached glass surface. The chemistry and structure, in terms of Q distributions of the parent glass, are well represented by the atomic ratios of the glass forming components. Thus, glass dissolution modeling using simple

  11. Durable bistable auxetics made of rigid solids

    Science.gov (United States)

    Shang, Xiao; Liu, Lu; Rafsanjani, Ahmad; Pasini, Damiano

    2018-02-01

    Bistable Auxetic Metamaterials (BAMs) are a class of monolithic perforated periodic structures with negative Poisson's ratio. Under tension, a BAM can expand and reach a second state of equilibrium through a globally large shape transformation that is ensured by the flexibility of its elastomeric base material. However, if made from a rigid polymer, or metal, BAM ceases to function due to the inevitable rupture of its ligaments. The goal of this work is to extend the unique functionality of the original kirigami architecture of BAM to a rigid solid base material. We use experiments and numerical simulations to assess performance, bistability and durability of rigid BAMs at 10,000 cycles. Geometric maps are presented to elucidate the role of the main descriptors of BAM architecture. The proposed design enables the realization of BAM from a large palette of materials, including elastic-perfectly plastic materials and potentially brittle materials.

  12. Lightweight, durable lead-acid batteries

    Science.gov (United States)

    Lara-Curzio, Edgar; An, Ke; Kiggans, Jr., James O; Dudney, Nancy J; Contescu, Cristian I; Baker, Frederick S; Armstrong, Beth L

    2013-05-21

    A lightweight, durable lead-acid battery is disclosed. Alternative electrode materials and configurations are used to reduce weight, to increase material utilization and to extend service life. The electrode can include a current collector having a buffer layer in contact with the current collector and an electrochemically active material in contact with the buffer layer. In one form, the buffer layer includes a carbide, and the current collector includes carbon fibers having the buffer layer. The buffer layer can include a carbide and/or a noble metal selected from of gold, silver, tantalum, platinum, palladium and rhodium. When the electrode is to be used in a lead-acid battery, the electrochemically active material is selected from metallic lead (for a negative electrode) or lead peroxide (for a positive electrode).

  13. Bonding Durability of Four Adhesive Systems

    Science.gov (United States)

    Seyed Tabai, Elaheh; Mohammadi Basir, Mahshid

    2015-01-01

    Objectives: This study aimed to compare the durability of four adhesive systems by assessing their microtensile bond strength (MTBS) and microleakage during six months of water storage. Materials and Methods: A total of 128 human third molars were used. The adhesives tested were Scotch Bond Multipurpose (SBMP), Single Bond (SB), Clearfil-SE bond (CSEB), and All-Bond SE (ABSE). After sample preparation for MTBS testing, the microspecimens were subjected to microtensile tester after one day and six months of water storage. For microleakage evaluation, facial and lingual class V cavities were prepared and restored with composite. After thermocycling, microleakage was evaluated. Bond strength values were subjected to one-way ANOVA and Tamhane’s test, and the microleakage data were analyzed by the Kruskal-Wallis, Dunn, Mann Whitney and Wilcoxon tests (Pself-etch adhesives at the gingival margin or MTBS of CSEB and SB. PMID:27123015

  14. Cement replacement materials. Properties, durability, sustainability

    International Nuclear Information System (INIS)

    Ramezanianpour, Ali Akbar

    2014-01-01

    The aim of this book is to present the latest findings in the properties and application of Supplementary Cementing Materials and blended cements currently used in the world in concrete. Sustainability is an important issue all over the world. Carbon dioxide emission has been a serious problem in the world due to the greenhouse effect. Today many countries agreed to reduce the emission of CO2. Many phases of cement and concrete technology can affect sustainability. Cement and concrete industry is responsible for the production of 7% carbon dioxide of the total world CO2 emission. The use of supplementary cementing materials (SCM), design of concrete mixtures with optimum content of cement and enhancement of concrete durability are the main issues towards sustainability in concrete industry.

  15. Durable fiber reinforced self-compacting concrete

    International Nuclear Information System (INIS)

    Corinaldesi, V.; Moriconi, G.

    2004-01-01

    In order to produce thin precast elements, a self-compacting concrete was prepared. When manufacturing these elements, homogenously dispersed steel fibers instead of ordinary steel-reinforcing mesh were added to the concrete mixture at a dosage of 10% by mass of cement. An adequate concrete strength class was achieved with a water to cement ratio of 0.40. Compression and flexure tests were carried out to assess the safety of these thin concrete elements. Moreover, serviceability aspects were taken into consideration. Firstly, drying shrinkage tests were carried out in order to evaluate the contribution of steel fibers in counteracting the high concrete strains due to a low aggregate-cement ratio. Secondly, the resistance to freezing and thawing cycles was investigated on concrete specimens in some cases superficially treated with a hydrophobic agent. Lastly, both carbonation and chloride penetration tests were carried out to assess durability behavior of this concrete mixture

  16. Neoclassical theory of durable good diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, J.R.; Kaserman, D.L.

    1979-10-01

    Existing studies that deal with the diffusion of durable good innovations have been justifiably criticized for their common lack of an explicit testable theory of new product growth. This paper attempts to remedy this situation by providing a theoretical model of market penetration of new durable goods that is derived from the basic assumption that potential users of the new intermediate product attempt to minimize the discounted costs of production over time. The resulting model defines a time path of short-run equilibrium market shares that are determined by the cost characteristics (capital cost and operating and maintenance expenses) of both the new innovation and the equipment that it is designed to replace, the age distribution of the existing capital stock, and the growth rate of the adopting sector. This model is shown to exhibit several attractive features lacking in existing models of the diffusion process. First, it yields a number of testable hypotheses, some of which have received indirect empirical support in previous studies on the subject. Second, it is operational in the absence of historical data on the market experience of the new good under investigation. And third, it is capable of generating, on the basis of such ex ante information, the complete range of functional forms used in prior models to represent the relationship between market share and elapsed time since introduction of the new innovation. These features render the model inherently superior to existing studies for the analysis of emerging products and frontier technologies for which market data are not yet available.

  17. Ameliorating effects of industrial sugar residue on the Jales gold mine spoil (NE Portugal) using Holcus lanatus and Phaseolus vulgaris as indicators

    International Nuclear Information System (INIS)

    Bleeker, P.M.; Teiga, P.M.; Santos, M.H.; Koe, T. de; Verkleij, J.A.C.

    2003-01-01

    A residue of the sugar industry can be used in revegetation programs on metal contaminated sites. - Phytostabilisation of bare heavily contaminated substrate, such as abandoned mine sites, is considered a very appropriate technology in order to diminish erosion and dispersion of contaminants into the surroundings. In this short-term pot study, application of industrial sugar residue (ISR), a waste product of the sugar industry, proved to ameliorate spoils conditions for plant performance by elevating pH and immobilising several metals. Although arsenate concentrations were positively correlated to spoil pH and spoil treatment with ISR mobilised As, growth of both Phaseolus vulgaris and Holcus lanatus improved significantly after applications of 3.75 g ISR kg -1 dry spoil. Nutrient uptake from the substrate, with the exception of potassium, was elevated by ISR. As a remediation technique ISR application could be effective although in As-contaminated sites application might be restricted to areas where leaching to (ground) water does not form a risk

  18. Heritage stones and their deterioration in rock-cut monuments in India

    Science.gov (United States)

    Sharma, Vinod K.

    2017-04-01

    India is dotted with thousands of rock- cut monuments of considerable antiquity having artwork of global importance. It is evident from the location of many of these monuments that knowledge of viable selection of site, geotechnical considerations and amenability to sculptures' chisel was vital for construction of rock-cut monuments and sculptures. These rock-cut structures also represent significant achievements of geotechnical and structural engineering and craftsmanship of contemporary period. The paper deals with some of the sites where natural rock-mass exposures were used to hew the monuments and highlight the deterioration owing to geological and climatic conditions. The Kailash temple in Ellora and Ajanta rock-cut caves are among the greatest architectural feats which owe their grandeur to amenability and consistency of basalt of Deccan Volcanic Province from which it is hewn. The Kailash Temple was created through a single, huge top-down excavation 100 feet deep down into the volcanic basaltic cliff rock. These ancient rock cut structures are amazing achievements of structural engineering and craftsmanship. The lava flows are nearly horizontal, competent rock medium facilitated the chiseling for the sculptures. The deterioration of these basalts are seen where the amygdule, vesicles and opening in rock discontinuity had the medium of construction or excavation. The monolithic rock- cut monuments of Mahabalipuram temples are constructed in the form of rathas or chriot and adjoining caves by excavating solid charnockite/granites. The large rock exposures are excavated and cut to perfection with wall decorations and sculptured art. The charnockites are the strongest and the most durable rock, yet quite amenable to fine dressing. These monolithic monuments in charnockite and are cut out of the hillock. The 7th Century monuments now exhibit somewhat rough surface probably due to weathering effect of salt laden winds from the sea side and alteration of feldspars

  19. Redemption of the "spoiled identity:" the role of HIV-positive individuals in HIV care cascade interventions.

    Science.gov (United States)

    Camlin, Carol S; Charlebois, Edwin D; Geng, Elvin; Semitala, Fred; Wallenta, Jeanna; Getahun, Monica; Kampiire, Leatitia; Bukusi, Elizabeth A; Sang, Norton; Kwarisiima, Dalsone; Clark, Tamara D; Petersen, Maya L; Kamya, Moses R; Havlir, Diane V

    2017-12-01

    The concept of "therapeutic citizenship" has drawn attention to ways in which public testimony, the "story-telling in the public sphere" undertaken by people living with HIV (PLHIV), has shaped the global response to the epidemic. This paper presents qualitative findings from two large studies in eastern Africa that reveal how the advent of population-based HIV testing campaigns and efforts to accelerate antiretroviral "treatment for all" has precipitated a rapidly expanding therapeutic citizenship "project," or social movement. The title of this paper refers to Goffman's original conceptualization of stigma as a social process through which a person's identity is rendered "spoiled." Data were derived from qualitative studies embedded within two clinical trials, Sustainable East African Research in Community Health (SEARCH) (NCT# 01864603) in Kenya and Uganda, and START-ART (NCT# 01810289) in Uganda, which aimed to offer insights into the pathways through which outcomes across the HIV care continuum can be achieved by interventions deployed in the studies, any unanticipated consequences, and factors that influenced implementation. Qualitative in-depth semi-structured interviews were conducted among cohorts of adults in 2014 through 2015; across both studies and time periods, 217 interviews were conducted with 166 individuals. Theoretically informed, team-based analytic approaches were used for the analyses. Narratives from PLHIV, who have not always been conceptualized as actors but rather usually as targets of HIV interventions, revealed strongly emergent themes related to these individuals' use of HIV biomedical resources and discourses to fashion a new, empowered subjecthood. Experiencing the benefits of antiretroviral therapy (ART) emboldens many individuals to transform their "spoiled" identities to attain new, valorized identities as "advocates for ART" in their communities. We propose that the personal revelation of what some refer to as the "gospel of ARVs

  20. Durability of Prunus africana: Evidence of Biocidal and Lipophilic Properties Responsible for Natural Durability

    International Nuclear Information System (INIS)

    Mburu, F. Muisu F.; Gerardin, P.

    2007-01-01

    Analysis of the prunus africana sapwood and heartwood extracts was studied with the aim of understanding the reasons for it's natural durability. Soxhlet extraction of wood powder using different solvents was done. The extracts were tested against the fungi coriolus versicolor, Poria placenta and Aureobasidium pullulans at concentrations of 50, 100, 500 and 1000 ppm. Soxhlet extraction of wood blocks using the same solvents was also carried out and the wood blocks finally tested against fungi and termites. The results showed high exhibition rate against fungi at low extract concentrations. Extracted wood blocks showed low resistance against termites while the un-extracted ones were resistant. Analysis of the products present in hexane, dichloromethane, acetone, toluene/ethanol and water extracts by HPLC indicates presence of phenols and lipophilic compounds, which could be associated with the preceding results. Inhibition against fungi increased with extract concentration and decreased with time. In some instances at high concentration, fungal growth started after the control Petri-dish was fully colonized. Inspite of the fungal and termiticidal properties of certain products contained in the extracts, these properties do not entirely explain the reasons for the high durability. Chemical synthesis with formulations based on the natural components present in the extracts of such durable wood could be interesting as potential additives in fungicides and insecticides. Such formulations based on natural compounds could environmentally friendly

  1. Rock magnetic properties

    International Nuclear Information System (INIS)

    Hearst, R.B.; Morris, W.A.

    1991-01-01

    In 1978 the Nuclear Fuel Waste Management Program began the long task of site selection and evaluation for nuclear waste disposal. The Canadian Nuclear Fuel Waste Management Program, administered by Atomic Energy of Canada Limited, Research Company has provided the geophysicist with the unique opportunity to evaluate many modes of geophysical investigation in conjunction with detailed geologic mapping at a number of research areas. Of particular interest is research area RA-7, East Bull Lake, Algoma District, Ontario. Geophysical survey methods applied to the study of this included detailed gravity, ground magnetics, VLF, an airborne magnetic gradiometer survey and an airborne helicopter magnetic and EM survey. A comprehensive suite of rock property studies was also undertaken providing information on rock densities and magnetic rock properties. Preliminary modeling of the magnetic data sets assuming only induced magnetization illustrated the difficulty of arriving at a magnetic source geometry consistent with the mapped surficial and borehole geology. Integration of the magnetic rock properties observations and industry standard magnetic modelling techniques provides a source model geometry that is consistent with other geophysical/geological data sets, e.g. gravity and observed geology. The genesis of individual magnetic signatures in the East Bull Lake gabbro-anorthosite record the intrusion, metamorphism and fracture alteration of the pluton. As shown by this paper, only by understanding the rock magnetic signatures associated with each of these events is it possible to obtain geologically meaningful interpretative models

  2. Towards a durability test for washing-machines.

    Science.gov (United States)

    Stamminger, Rainer; Tecchio, Paolo; Ardente, Fulvio; Mathieux, Fabrice; Niestrath, Phoebe

    2018-04-01

    Durability plays a key role in enhancing resource conservation and contributing to waste minimization. The washing-machine product group represents a relevant case study for the development of a durability test and as a potential trigger to systematically address durability in the design of products. We developed a procedure to test the durability performance of washing-machines as a main objective of this research. The research method consisted of an analysis of available durability standards and procedures to test products and components, followed by an analysis of relevant references related to frequent failures. Finally, we defined the criteria and the conditions for a repeatable, relatively fast and relevant endurance test. The durability test considered the whole product tested under conditions of stress. A series of spinning cycles with fixed imbalanced loads was run on two washing-machines to observe failures and performance changes during the test. Even though no hard failures occurred, results clearly showed that not all washing-machines can sustain such a test without abrasion or performance deterioration. However, the attempt to reproduce the stress induced on a washing-machine by carrying out a high number of pure spinning cycles with fixed loads did not allow equal testing conditions: the actions of the control procedure regarding imbalanced loads differ from machine to machine. The outcomes of this research can be used as grounds to develop standardised durability tests and to, hence, contribute to the development of future product policy measures.

  3. Rehabilitation of semi-arid coal mine spoil bank soils with mine residues and farm organic by-products

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, M.; Bosch-Serra, A.; Estudillos, G.; Poch, R.M. [University of Lleida, Lleida (Spain). Dept. of Environmental & Soil Science

    2009-07-01

    A method of rehabilitating coal mine soils was studied under the conditions of a semi-arid climate, lack of topsoil but availability of farm by-products in NE Spain. The objectives of the research were to assess a new method in order to achieve a suitable substrate for the establishment of native vegetation, to evaluate environmental impacts associated with the reclamation process, and to determine the time necessary to integrate the treated area into the surrounding environment. Eight plots (10 x 35 m{sup 2}) were established in September 1997. Substrate combinations of two types of mine spoil (coal dust and coarse-sized material), two levels of pig slurry (39 and 94 Mg ha{sup -1}dry-wt), and cereal straw (0 and 15 Mg ha{sup -1}) were applied. Monitoring of select physical and chemical soil properties and vegetation characteristics was performed from 1997 until 2005. The bulk density and the saturated hydraulic conductivity measured did not limit plant development and water availability. Initial substrate salinity (1.37 S m{sup -1}) decreased with time and in the long term did not limit plant colonization to salinity-adapted species. Initial nitrate concentration was 298 mg kg{sup -1}, but was reduced significantly to acceptable values in 3 years (55 mg kg{sup -1}) and the measured pH (7.6) was maintained at the level of initial spoil values. Vegetation cover reached up to 90%. In the treated area, spontaneous vegetation cover (15 to 70%) colonized the nonsown areas widely. In the medium term, vegetation cover tended to be higher in plots with a thicker layer of coal dust material and the higher slurry rate. Soil rehabilitation and environmental reintegration, taking into account soil and vegetation indicators, was possible in the studied area with low cost inputs using residual materials from mining activities and animal husbandry by-products.

  4. Sedimentary Rocks and Dunes

    Science.gov (United States)

    2004-01-01

    25 November 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows buttes composed of light-toned, sedimentary rock exposed by erosion within a crater occurring immediately west of Schiaparelli Basin near 4.0oS, 347.9oW. Surrounding these buttes is a field of dark sand dunes and lighter-toned, very large windblown ripples. The sedimentary rocks might indicate that the crater interior was once the site of a lake. The image covers an area about 3 km (1.9 mi) wide. Sunlight illuminates the scene from the lower left.

  5. Session: Hard Rock Penetration

    Energy Technology Data Exchange (ETDEWEB)

    Tennyson, George P. Jr.; Dunn, James C.; Drumheller, Douglas S.; Glowka, David A.; Lysne, Peter

    1992-01-01

    This session at the Geothermal Energy Program Review X: Geothermal Energy and the Utility Market consisted of five presentations: ''Hard Rock Penetration - Summary'' by George P. Tennyson, Jr.; ''Overview - Hard Rock Penetration'' by James C. Dunn; ''An Overview of Acoustic Telemetry'' by Douglas S. Drumheller; ''Lost Circulation Technology Development Status'' by David A. Glowka; ''Downhole Memory-Logging Tools'' by Peter Lysne.

  6. Testing the durability of concrete with neutron radiography

    International Nuclear Information System (INIS)

    Beer, F.C. de; Le Roux, J.J.; Kearsley, E.P.

    2005-01-01

    The ability of concrete to withstand the penetration of liquid and oxygen can be described as the durability of concrete. The durability of concrete, can in turn, be quantified by certain characteristics of the concrete such as the porosity, sorptivity and permeability. The quantification of neutron radiography images of concrete structures and, therefore, the determination of concrete characteristics validate conventional measurements. This study compares the neutron radiography capability to obtain quantitative data for porosity and sorptivity in concrete to laboratory or conventional measurements. The effects that water to cement ratio and curing time have on the durability of concrete are investigated

  7. Evaluation and improvement of frost durability of clay bricks

    Science.gov (United States)

    Koroth, Surej Raghavan

    In cold regions like Canada, frost action was reported to be the major cause of disintegration of brick veneer. Two approaches to ensure frost durability of clay bricks were studied in this research. One involved the evaluation of durability, while the other studied the improvement of durability through impregnation. In order to carry out these studies, three major objectives were set out for this research. They were: (1) to develop an index to evaluate frost durability, (2) to investigate the feasibility of using nondestructive methods to evaluate durability, and (3) to study the effect of impregnation with different materials on improving durability. It was intended in this research to develop a general durability index for clay bricks, irrespective of the manufacturing process adopted. The performance of the brick was studied using laboratory freeze-thaw test. As the time and facility requirements necessary for the unidirectional freezing test were beyond the constraints which existed in this research, an accelerated omnidirectional freeze-thaw test was used. This fact must be considered while interpreting the results from the freeze-thaw test. The study carried out to compare the performance of existing durability indices showed that they had limitations in reliably assessing durability. Therefore new durability indices were developed based on water absorption properties of bricks. These indices were found to overcome the limitations of existing indices. The feasibility study on nondestructive evaluation of durability was carried out using ultrasonic pulse velocity. New durability provisions were derived based on pulse velocity, using ASTM C216 specifications. At this stage it can be used only along with the ASTM method but it can avoid the time consuming ASTM procedure in many cases. Studies on impregnated bricks showed that there was a general shifting of pore sizes towards lower diameter region. Paraffin impregnated brick showed excellent freeze

  8. Northeast Church Rock Mine

    Science.gov (United States)

    Northeast Church Rock Mine, a former uranium mine 17 miles northeast of Gallup, NM in the Pinedale Chapter of the Navajo Nation. EPA is working with NNEPA to oversee cleanup work by United Nuclear Corporation, a company owned by General Electric (GE).

  9. Rock-hard coatings

    OpenAIRE

    Muller, M.

    2007-01-01

    Aircraft jet engines have to be able to withstand infernal conditions. Extreme heat and bitter cold tax coatings to the limit. Materials expert Dr Ir. Wim Sloof fits atoms together to develop rock-hard coatings. The latest invention in this field is known as ceramic matrix composites. Sloof has signed an agreement with a number of parties to investigate this material further.

  10. Rock-hard coatings

    NARCIS (Netherlands)

    Muller, M.

    2007-01-01

    Aircraft jet engines have to be able to withstand infernal conditions. Extreme heat and bitter cold tax coatings to the limit. Materials expert Dr Ir. Wim Sloof fits atoms together to develop rock-hard coatings. The latest invention in this field is known as ceramic matrix composites. Sloof has

  11. Fluids in metamorphic rocks

    NARCIS (Netherlands)

    Touret, J.L.R.

    2001-01-01

    Basic principles for the study of fluid inclusions in metamorphic rocks are reviewed and illustrated. A major problem relates to the number of inclusions, possibly formed on a wide range of P-T conditions, having also suffered, in most cases, extensive changes after initial trapping. The

  12. High gain durable anti-reflective coating

    Energy Technology Data Exchange (ETDEWEB)

    Maghsoodi, Sina; Brophy, Brenor L.; Colson, Thomas E.; Gonsalves, Peter R.; Abrams, Ze' ev R.

    2016-07-26

    Disclosed herein are polysilsesquioxane-based anti-reflective coating (ARC) compositions, methods of preparation, and methods of deposition on a substrate. In one embodiment, the polysilsesquioxane of this disclosure is prepared in a two-step process of acid catalyzed hydrolysis of organoalkoxysilane followed by addition of tetralkoxysilane that generates silicone polymers with >40 mol % silanol based on Si-NMR. These high silanol siloxane polymers are stable and have a long shelf-life in polar organic solvents at room temperature. Also disclosed are low refractive index ARC made from these compositions with and without additives such as porogens, templates, thermal radical initiator, photo radical initiators, crosslinkers, Si--OH condensation catalyst and nano-fillers. Also disclosed are methods and apparatus for applying coatings to flat substrates including substrate pre-treatment processes, coating processes and coating curing processes including skin-curing using hot-air knives. Also disclosed are coating compositions and formulations for highly tunable, durable, highly abrasion-resistant functionalized anti-reflective coatings.

  13. Durability Evaluation of Selected Solid Lubricating Films

    Science.gov (United States)

    Miyoshi, Kazuhisa

    2001-01-01

    An investigation was conducted to examine the coefficients of friction, wear rates, and durability of bonded molybdenum disulfide (MoS2), magnetron-sputtered MoS2, ion-plated silver, ion-plated lead, magnetron-sputtered diamondlike carbon (MS DLC), and plasma-assisted, chemical-vapor-deposited DLC (PACVD DLC) films in sliding contact with 6-mm-diameter AISI 440C stainless steel balls. Unidirectional ball-on-disk sliding friction experiments were conducted with a load of 5.9 N and a sliding velocity of 0.2 m/s at room temperature in three environments: ultrahigh vacuum (vacuum pressure, 7 x 10(exp -7) Pa), humid air (relative humidity, approx. 20 percent), and dry nitrogen (relative humidity, less than 1 percent). The main criteria for judging the performance of the solid lubricating films were coefficient of friction and wear rate, which had to be less than 0.3 and on the order of 10(exp -6) cu mm/N.m or less, respectively. The bonded MoS2 and magnetron-sputtered MoS2 films met the criteria in all three environments. The ion-plated lead and silver films met the criteria only in ultrahigh vacuum but failed in humid air and in dry nitrogen. The MS DLC and PACVD DLC films met the requirements in humid air and dry nitrogen but failed in ultrahigh vacuum.

  14. Optical enhancing durable anti-reflective coating

    Science.gov (United States)

    Maghsoodi, Sina; Varadarajan, Aravamuthan; Movassat, Meisam

    2016-07-05

    Disclosed herein are polysilsesquioxane based anti-reflective coating (ARC) compositions, methods of preparation, and methods of deposition on a substrate. In embodiments, the polysilsesquioxane of this disclosure is prepared in a two-step process of acid catalyzed hydrolysis of organoalkoxysilane followed by addition of tetralkoxysilane that generates silicone polymers with >40 mol % silanol based on Si-NMR. These high silanol siloxane polymers are stable and have a long shelf-life in the polar organic solvents at room temperature. Also disclosed are low refractive index ARC made from these compositions with and without additives such as porogens, templates, Si--OH condensation catalyst and/or nanofillers. Also disclosed are methods and apparatus for applying coatings to flat substrates including substrate pre-treatment processes, coating processes including flow coating and roll coating, and coating curing processes including skin-curing using hot-air knives. Also disclosed are coating compositions and formulations for highly tunable, durable, highly abrasion-resistant functionalized anti-reflective coatings.

  15. High gain durable anti-reflective coating

    Energy Technology Data Exchange (ETDEWEB)

    Maghsoodi, Sina; Brophy, Brenor L.; Colson, Thomas E.; Gonsalves, Peter R.; Abrams, Ze' ev R.

    2017-06-27

    Disclosed herein are polysilsesquioxane-based anti-reflective coating (ARC) compositions, methods of preparation, and methods of deposition on a substrate. In one embodiment, the polysilsesquioxane of this disclosure is prepared in a two-step process of acid catalyzed hydrolysis of organoalkoxysilane followed by addition of tetralkoxysilane that generates silicone polymers with >40 mol % silanol based on Si-NMR. These high silanol siloxane polymers are stable and have a long shelf-life in polar organic solvents at room temperature. Also disclosed are low refractive index ARC made from these compositions with and without additives such as porogens, templates, thermal radical initiator, photo radical initiators, crosslinkers, Si--OH condensation catalyst and nano-fillers. Also disclosed are methods and apparatus for applying coatings to flat substrates including substrate pre-treatment processes, coating processes and coating curing processes including skin-curing using hot-air knives. Also disclosed are coating compositions and formulations for highly tunable, durable, highly abrasion-resistant functionalized anti-reflective coatings.

  16. Teeth: Among Nature's Most Durable Biocomposites

    Science.gov (United States)

    Lawn, Brian R.; Lee, James J.-W.; Chai, Herzl

    2010-08-01

    This paper addresses the durability of natural teeth from a materials perspective. Teeth are depicted as smart biocomposites, highly resistant to cumulative deformation and fracture. Favorable morphological features of teeth at both macroscopic and microscopic levels contribute to an innate damage tolerance. Damage modes are activated readily within the brittle enamel coat but are contained from spreading catastrophically into the vulnerable tooth interior in sustained occlusal loading. Although tooth enamel contains a multitude of microstructural defects that can act as sources of fracture, substantial overloads are required to drive any developing cracks to ultimate failure—nature's strategy is to contain damage rather than avoid it. Tests on model glass-shell systems simulating the basic elements of the tooth enamel/dentin layer structure help to identify important damage modes. Fracture and deformation mechanics provide a basis for analyzing critical conditions for each mode, in terms of characteristic tooth dimensions and materials properties. Comparative tests on extracted human and animal teeth confirm the validity of the model test approach and point to new research directions. Implications in biomechanics, especially as they relate to dentistry and anthropology, are outlined.

  17. The hydrogen: a clean and durable energy; L'hydrogene: une energie propre et durable

    Energy Technology Data Exchange (ETDEWEB)

    Alleau, Th. [Association Francaise de l' Hydrogene (France); Nejat Veziroglu, T. [Clean Energy Research Institute, University of Miami (United States); Lequeux, G. [Commission europeenne, DG de la Recherche, Bruxelles (Belgium)

    2000-07-01

    All the scientific experts agree, the hydrogen will be the energy vector of the future. During this conference day on the hydrogen, the authors recalled the actual economic context of the energy policy with the importance of the environmental policy and the decrease of the fossil fuels. The research programs and the attitudes of the France and the other countries facing the hydrogen are also discussed, showing the great interest for this clean and durable energy. They underline the importance of an appropriate government policy, necessary to develop the technology of the hydrogen production, storage and use. (A.L.B.)

  18. Laboratory and exterior durability of high performance acrylic sealants

    Energy Technology Data Exchange (ETDEWEB)

    Demarest, V.A.; Dionne, J.A.; Lertora, M.; Magnotta, J.R. [Rohm and Haas Co., Spring House, PA (United States). Caulk and Sealants Group

    1998-12-31

    This paper documents the laboratory and exterior durability of high performance, Class 25 acrylic sealants. Commercial silicone and polyurethane sealants are used as controls. Laboratory durability is evaluated by measuring sealant flexibility, tensile properties and ASTM C920 and ISO 11600 joint movement capabilities. Many of these properties are measured both before and after 2500 hours of Weather-Ometer exposure. Exterior durability is assessed by monitoring 2 to 15 year exterior exposures in moving joints in low rise commercial buildings of brick, aluminum and Exterior Insulation Finishing Systems (EIFS) construction. Both laboratory and exterior durability measurements indicate that high performance Class 25 acrylic sealants have good joint movement capabilities, excellent weatherability and aesthetics, and are generally able to maintain an effective seal to a variety of substrates after extended exterior exposure. They perform and test in a manner similar to other Class 25 sealants of alternative chemistries.

  19. Thermodynamic model of natural, medieval and nuclear waste glass durability

    International Nuclear Information System (INIS)

    Jantzen, C.M.; Plodinec, M.J.

    1983-01-01

    A thermodynamic model of glass durability based on hydration of structural units has been applied to natural glass, medieval window glasses, and glasses containing nuclear waste. The relative durability predicted from the calculated thermodynamics correlates directly with the experimentally observed release of structural silicon in the leaching solution in short-term laboratory tests. By choosing natural glasses and ancient glasses whose long-term performance is known, and which bracket the durability of waste glasses, the long-term stability of nuclear waste glasses can be interpolated among these materials. The current Savannah River defense waste glass formulation is as durable as natural basalt from the Hanford Reservation (10 6 years old). The thermodynamic hydration energy is shown to be related to the bond energetics of the glass. 69 references, 2 figures, 1 table

  20. Durable Dust Repellent Coating for Metals, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The Durable Dust Repellent Coating (DDRC) consists of nano-phase silica, titania, or other oxide coatings to repel dust in a vacuum environment over a wide range of...

  1. Nanocomposites for Improved Physical Durability of Porous PVDF Membranes

    Science.gov (United States)

    Lai, Chi Yan; Groth, Andrew; Gray, Stephen; Duke, Mikel

    2014-01-01

    Current commercial polymer membranes have shown high performance and durability in water treatment, converting poor quality waters to higher quality suitable for drinking, agriculture and recycling. However, to extend the treatment into more challenging water sources containing abrasive particles, micro and ultrafiltration membranes with enhanced physical durability are highly desirable. This review summarises the current limits of the existing polymeric membranes to treat harsh water sources, followed by the development of nanocomposite poly(vinylidene fluoride) (PVDF) membranes for improved physical durability. Various types of nanofillers including nanoparticles, carbon nanotubes (CNT) and nanoclays were evaluated for their effect on flux, fouling resistance, mechanical strength and abrasion resistance on PVDF membranes. The mechanisms of abrasive wear and how the more durable materials provide resistance was also explored. PMID:24957121

  2. Nanocomposites for Improved Physical Durability of Porous PVDF Membranes

    Directory of Open Access Journals (Sweden)

    Chi Yan Lai

    2014-02-01

    Full Text Available Current commercial polymer membranes have shown high performance and durability in water treatment, converting poor quality waters to higher quality suitable for drinking, agriculture and recycling. However, to extend the treatment into more challenging water sources containing abrasive particles, micro and ultrafiltration membranes with enhanced physical durability are highly desirable. This review summarises the current limits of the existing polymeric membranes to treat harsh water sources, followed by the development of nanocomposite poly(vinylidene fluoride (PVDF membranes for improved physical durability. Various types of nanofillers including nanoparticles, carbon nanotubes (CNT and nanoclays were evaluated for their effect on flux, fouling resistance, mechanical strength and abrasion resistance on PVDF membranes. The mechanisms of abrasive wear and how the more durable materials provide resistance was also explored.

  3. Effect of Soorh Metakaolin on Concrete Compressive Strength and Durability

    Directory of Open Access Journals (Sweden)

    A. Saand

    2017-12-01

    Full Text Available Concrete durability is a key aspect for forecasting the expected life time of concrete structures. In this paper, the effect of compressive strength and durability of concrete containing metakaolin developed from a local natural material (Soorh of Thatta Distict of Sindh, Pakistan is investigated. Soorh is calcined by an electric furnace at 8000C for 2 hours to produce metakaolin. One mix of ordinary concrete and five mixes of metakaolin concrete were prepared, where cement is replaced by developed metakaolin from 5% to 25% by weight, with 5% increment step. The concrete durability was tested for water penetration, carbonation depth and corrosion resistance. The obtained outcomes demonstrated that, 15% replacement level of local developed metakaolin presents considerable improvements in concrete properties. Moreover, a considerable linear relationship was established between compressive strength and concrete durability indicators like water penetration, carbonation depth and corrosion resistance.

  4. Research notes : durability of composite repairs on bridges.

    Science.gov (United States)

    2009-08-01

    The research showed that conditions that allow moisture to get under the carbon fiber reinforced polymer composites (CFRP) combined with freeze-thaw were detrimental to durability. In addition, the results showed that the American Concrete Institute ...

  5. Development of a CB Resistant Durable, Flexible Hydration System

    National Research Council Canada - National Science Library

    Hall, Peyton W; Zeller, Frank T; Bulluck, John W; Dingus, Michael L

    2002-01-01

    A durable, flexible hydration system resistant to contamination by contact with VX, GD, and HD chemical agents, as well as damage by the decontaminants sodium hypochlorite and DS-2 is being developed for aviator use...

  6. Training for Efficient, Durable, and Flexible Performance in the Military

    National Research Council Canada - National Science Library

    Healy, Alice F; Wohldmann, Erica L; Kole, James A; Schneider, Vivian I; Shea, Kathleen M; Bourne, Jr, Lyle E

    2008-01-01

    .... Efficiency is essential because of the high costs of training. Military training also must be durable to ensure long-term retention of the trained knowledge and skills for later success in the field...

  7. Gene pyramiding enhances durable blast disease resistance in rice

    OpenAIRE

    Fukuoka, Shuichi; Saka, Norikuni; Mizukami, Yuko; Koga, Hironori; Yamanouchi, Utako; Yoshioka, Yosuke; Hayashi, Nagao; Ebana, Kaworu; Mizobuchi, Ritsuko; Yano, Masahiro

    2015-01-01

    Effective control of blast, a devastating fungal disease of rice, would increase and stabilize worldwide food production. Resistance mediated by quantitative trait loci (QTLs), which usually have smaller individual effects than R-genes but confer broad-spectrum or non-race-specific resistance, is a promising alternative to less durable race-specific resistance for crop improvement, yet evidence that validates the impact of QTL combinations (pyramids) on the durability of plant disease resista...

  8. L' agrticulture durable au Benin: constat, analyse et perspectives

    NARCIS (Netherlands)

    L.J. de Haan (Leo); P. Ton (Peter)

    1995-01-01

    textabstractLorsque Pezzey (1989) peut marquer déjà 33 définitions différentes du concept `développement durable', qu'il rencontrait dans une bibliographie incomplète de notions de durabilité, alors un séminaire sur le thème `développement durable' court facilement le risque d'aboutir à une

  9. Durability, value, and reliability of selected electric powered wheelchairs.

    Science.gov (United States)

    Fass, Megan V; Cooper, Rory A; Fitzgerald, Shirley G; Schmeler, Mark; Boninger, Michael L; Algood, S David; Ammer, William A; Rentschler, Andrew J; Duncan, John

    2004-05-01

    To compare the durability, value, and reliability of selected electric powered wheelchairs (EPWs), purchased in 1998. Engineering standards tests of quality and performance. A rehabilitation engineering center. Fifteen EPWs: 3 each of the Jazzy, Quickie, Lancer, Arrow, and Chairman models. Not applicable. Wheelchairs were evaluated for durability (lifespan), value (durability, cost), and reliability (rate of repairs) using 2-drum and curb-drop machines in accordance with the standards of the American National Standards Institute and Rehabilitation Engineering and Assistive Technology Society of North America. The 5 brands differed significantly (Preliability, except in terms of reliability of supplier repairs. The Arrow had the highest durability, value, and reliability in terms of the number of consumer failures, supplier failures, repairs, failures, consumer repairs and failures, and supplier repairs and failures. The Lancer had the poorest durability and reliability, and the Chairman had the lowest value. K0014 wheelchairs (Arrow, Permobil) were significantly more durable than K0011 wheelchairs (Jazzy, Quickie, Lancer). No significant differences in durability with respect to rear-wheel-drive (Arrow, Lancer, Quickie), mid-wheel-drive (Jazzy), or front-wheel-drive (Chairman) wheelchairs were found. The Arrow consistently outperformed the other wheelchairs in nearly every area studied, and K0014 wheelchairs were more durable than K0011 wheelchairs. These results can be used as an objective comparison guide for clinicians and consumers, as long as they are used in conjunction with other important selection criteria. Manufacturers can use these results as a guide for continued efforts to produce higher quality wheelchairs. Care should be taken when making comparisons, however, because the 5 brands had different features. Purchased in 1998, these models may be used for several more years. In addition, problem areas in these models may still be present in newer models.

  10. Soil/Rock Properties Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Soil/Rock Properties LaboratoryLocation: Spokane SiteThe Soil/Rock Properties Laboratory is contained in the soils bay, a 4,700 sq. ft. facility that provides space...

  11. 78 FR 48367 - TRICARE Program; Clarification of Benefit Coverage of Durable Equipment and Ordering or...

    Science.gov (United States)

    2013-08-08

    ... replacement of durable equipment is allowed when the durable equipment is not serviceable because of normal... use, and replacement of lost or stolen durable equipment, are excluded from coverage. In addition... TRICARE Program; Clarification of Benefit Coverage of Durable Equipment and Ordering or Prescribing...

  12. Factors affecting strength and durability of densified biomass products

    Energy Technology Data Exchange (ETDEWEB)

    Kaliyan, Nalladurai; Vance Morey, R. [Department of Bioproducts and Biosystems Engineering, University of Minnesota, 1390 Eckles Avenue, St. Paul, MN 55108 (United States)

    2009-03-15

    Effectiveness of a densification process to create strong and durable bonding in densified products such as pellets, briquettes, and cubes can be determined by testing the strength (i.e., compressive resistance, impact resistance, and water resistance), and durability (i.e., abrasion resistance) of the densified products. These tests can indicate the maximum force/stress that the densified products can withstand, and the amount of fines produced during handling, transportation, and storage. In this article, the procedures used for measuring the strength and durability of the densified products are discussed. The effects of constituents of the feed such as starch, protein, fiber, fat, lignin and extractives; feed moisture content; feed particle size and its distribution; feed conditioning temperature/preheating of feed; added binders; and densification equipment variables (forming pressure, and pellet mill and roll press variables) on the strength and durability of the densified products are reviewed. This article will help select process parameters to produce strong and durable densified products from new biomass feedstocks or animal feed formulations. Guidelines for developing standards on criteria for the acceptance levels of strength and durability of the densified products are presented. (author)

  13. Durability of compressed soil-cement bricks

    Directory of Open Access Journals (Sweden)

    Acosta Valle, A.

    2001-06-01

    Full Text Available This papers shows the evaluation process of the durability of compressed soil-cement bricks. A great number of tests were made to determine the behavior of bricks when they are compression loaded and under the influence of moisture. Two different types of soils were used to produce the bricks, a lime-clay soil and a sand one. The sand soil is very resistant. The other one has a limited use. An experimental design was used to test the bricks. It is a rotational and quadratic method with a hexagonal figure which contains replicas at the central point. This method ensures the reliability of test results. Otherwise, it would reduce the amount of specimens necessary for the tests. The optimun moisture content is obtained by using a press machine. It is more rational than the standard Proctor compactation test, because it applies the same type and amount of energy used to produce the bricks. The obtained results show the behavior differences between the two compressed soil-cement bricks subjected to the compression test, water absorption and wetting and drying tests. The durability tests results are very important in the possible use of the bricks produced.

    En el trabajo se evalúa la durabilidad de elementos aglomerados de suelo estabilizado. Se realiza un amplio número de ensayos encaminados a determinar el comportamiento frente a la acción de las cargas y la humedad de dos suelos con características diferentes: uno limo-arcilloso y el otro arenoso. Este último presenta resultados muy favorables en ambas direcciones. El otro, con un posible uso más limitado. Se emplea un método de diseño experimental del tipo rotacional cuadrático en hexágono, con réplicas en el punto central, el que garantiza la confiabilidad de los resultados de los ensayos, a la vez que disminuye la cantidad de especímenes a ensayar. Se determina la humedad óptima a utilizar en las diferentes dosificaciones empleando la máquina compactadora, que resulta m

  14. Assessment of cement durability in repository environment

    International Nuclear Information System (INIS)

    Ferreira, E.G.A.; Vicente, R.; Isiko, V.L.K.; Miyamoto, H.; Marumo, J.T.; Gobbo, L.A.

    2015-01-01

    The present research aimed at investigating the durability of cement paste under nuclear waste repository conditions using accelerated tests. Cement paste samples are examined after being exposed to the environmental conditions that are expected to prevail in the repository environment and the results are compared with those obtained with unexposed specimens or specimens exposed to reference conditions. The following exposure conditions were selected: a) Immersion in salt solution, distilled water, or kept in dry storage; b) Room temperature (20 C. degrees) or high temperature (60 C. degrees); c) Immersion time of 30 days or 60 days (not for dry storage); d) Irradiation to a dose of (400 kGy) or background radiation (0 kGy). After exposure to the stressing conditions, the effects of each factor on the cement paste samples were observed by changes in their characteristics. Compressive strength tests were performed on all samples and some of them were investigated in terms of changes in mineralogy by X-ray diffraction (XRD) and thermo-gravimetric analysis (TGA). With the results obtained so far it was possible to point out the following conclusions. First, after a period of immersion in water, cement paste samples further hydrated and presented higher mechanical resistance, as expected. Secondly, dry storage did not allow a complete hydration as a consequence of pore water evaporation. High temperatures intensified this process and led to the ettringite decomposition to meta-ettringite. Thirdly, higher temperature accelerated hydration kinetics and promoted higher mechanical resistance in samples kept under immersion. Fourthly, the irradiation dose applied was unable to change the mineralogy of cement paste samples and fifthly, no statistically significant differences were observed between 30 or 60 days exposure time, for the test conditions

  15. Uranium in alkaline rocks

    International Nuclear Information System (INIS)

    Murphy, M.; Wollenberg, H.; Strisower, B.; Bowman, H.; Flexser, S.; Carmichael, I.

    1978-04-01

    Geologic and geochemical criteria were developed for the occurrence of economic uranium deposits in alkaline igneous rocks. A literature search, a limited chemical analytical program, and visits to three prominent alkaline-rock localities (Ilimaussaq, Greenland; Pocos de Caldas, Brazil; and Powderhorn, Colorado) were made to establish criteria to determine if a site had some uranium resource potential. From the literature, four alkaline-intrusive occurrences of differing character were identified as type-localities for uranium mineralization, and the important aspects of these localities were described. These characteristics were used to categorize and evaluate U.S. occurrences. The literature search disclosed 69 U.S. sites, encompassing nepheline syenite, alkaline granite, and carbonatite. It was possible to compare two-thirds of these sites to the type localities. A ranking system identified ten of the sites as most likely to have uranium resource potential

  16. Uranium in alkaline rocks

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, M.; Wollenberg, H.; Strisower, B.; Bowman, H.; Flexser, S.; Carmichael, I.

    1978-04-01

    Geologic and geochemical criteria were developed for the occurrence of economic uranium deposits in alkaline igneous rocks. A literature search, a limited chemical analytical program, and visits to three prominent alkaline-rock localities (Ilimaussaq, Greenland; Pocos de Caldas, Brazil; and Powderhorn, Colorado) were made to establish criteria to determine if a site had some uranium resource potential. From the literature, four alkaline-intrusive occurrences of differing character were identified as type-localities for uranium mineralization, and the important aspects of these localities were described. These characteristics were used to categorize and evaluate U.S. occurrences. The literature search disclosed 69 U.S. sites, encompassing nepheline syenite, alkaline granite, and carbonatite. It was possible to compare two-thirds of these sites to the type localities. A ranking system identified ten of the sites as most likely to have uranium resource potential.

  17. Rock and mineral magnetism

    CERN Document Server

    O’Reilly, W

    1984-01-01

    The past two decades have witnessed a revolution in the earth sciences. The quantitative, instrument-based measurements and physical models of. geophysics, together with advances in technology, have radically transformed the way in which the Earth, and especially its crust, is described. The study of the magnetism of the rocks of the Earth's crust has played a major part in this transformation. Rocks, or more specifically their constituent magnetic minerals, can be regarded as a measuring instrument provided by nature, which can be employed in the service of the earth sciences. Thus magnetic minerals are a recording magnetometer; a goniometer or protractor, recording the directions of flows, fields and forces; a clock; a recording thermometer; a position recorder; astrain gauge; an instrument for geo­ logical surveying; a tracer in climatology and hydrology; a tool in petrology. No instrument is linear, or free from noise and systematic errors, and the performance of nature's instrument must be assessed and ...

  18. Limados : Rock peruano

    OpenAIRE

    García Morete, Ramiro

    2013-01-01

    Incentivado por la corriente nuevaolera que llegaba de México, fue señalado por especialistas como pionero del punk. Aunque el plan, era tocar con lo que hubiera. Un recodo ínfimo de un período breve pero sorprendentemente poderoso, los 60 en un país que hizo del rock una expresión propia de su cultura. Facultad de Periodismo y Comunicación Social

  19. Deformations of fractured rock

    International Nuclear Information System (INIS)

    Stephansson, O.

    1977-09-01

    Results of the DBM and FEM analysis in this study indicate that a suitable rock mass for repository of radioactive waste should be moderately jointed (about 1 joint/m 2 ) and surrounded by shear zones of the first order. This allowes for a gentle and flexible deformation under tectonic stresses and prevent the development of large cross-cutting failures in the repository area. (author)

  20. Impact of Redox on Glass Durability: The Glass Selection Process

    International Nuclear Information System (INIS)

    PEELER, DAVID

    2004-01-01

    Recent glass formulation activities have focused on developing alternative frit compositions for use with specific sludge batches to maximize melt rate and/or waste throughput. The general trend has been to increase the total alkali content in the glass through the use of a high alkali based frit, a less washed sludge, or a combination of the two. As a result, predictions of durability have become a limiting factor in defining the projected operating windows for the Defense Waste Processing Facility (DWPF) for certain systems. An additional issue for these high alkali glasses has been the effect of REDuction/OXidation (REDOX) on the durability of the glass. Recent analyses have indicated that the application of the durability model's value without consideration of the overall glass composition may lead to a more significant shift (larger magnitude) than needed. Therefore, activation of the REDOX term in the Product Composition Control System (PCCS) may have a significant impact on the predicted operational windows based on model predictions, but may not represent the realistic impact on the measured durability. In this report, two specific issues are addressed. First, a review of the data used to develop PCCS (in particular the durability model) showed the potential for a REDOX interaction that is not accounted for. More specifically, three terms were added to the current model and were found to be statistically significant at a confidence level of 95 per cent. These results suggest a possible interaction between REDOX and glass composition that is not accurately captured leading to potentially conservative decisions regarding the durability of reduced glasses. The second issue addressed in this report is the development of a 45 glass test matrix to assess the effect of REDOX on durability as well as to provide insight into specific interactive compositional effects on durability. The glasses were selected to support the assessment of the following specific

  1. Keratin Durability Has Implications for the Fossil Record: Results from a 10 Year Feather Degradation Experiment.

    Directory of Open Access Journals (Sweden)

    Alison E Moyer

    Full Text Available Keratinous 'soft tissue' structures (i.e. epidermally derived and originally non-biomineralized, include feathers, skin, claws, beaks, and hair. Despite their relatively common occurrence in the fossil record (second only to bone and teeth, few studies have addressed natural degradation processes that must occur in all organic material, including those keratinous structures that are incorporated into the rock record as fossils. Because feathers have high preservation potential and strong phylogenetic signal, in the current study we examine feathers subjected to different burial environments for a duration of ~10 years, using transmission electron microscopy (TEM and in situ immunofluorescence (IF. We use morphology and persistence of specific immunoreactivity as indicators of preservation at the molecular and microstructural levels. We show that feather keratin is durable, demonstrates structural and microstructural integrity, and retains epitopes suitable for specific antibody recognition in even the harshest conditions. These data support the hypothesis that keratin antibody reactivity can be used to identify the nature and composition of epidermal structures in the rock record, and to address evolutionary questions by distinguishing between alpha- (widely distributed and beta- (limited to sauropsids keratin.

  2. Rock in Rio: forever young

    Directory of Open Access Journals (Sweden)

    Ricardo Ferreira Freitas

    2014-12-01

    Full Text Available The purpose of this article is to discuss the role of Rock in Rio: The Musical, as herald of megafestival Rock in Rio. Driven by the success that musicals have reached in Brazil, we believe that the design of this spectacle of music, dance and staging renews the brand of the rock festival, once it adds the force of young and healthy bodies to its concept. Moreover, the musical provides Rock in Rio with some distance from the controversal trilogy of sex, drugs and rock and roll, a strong mark of past festivals around the world. Thus, the musical expands the possibilities of growth for the brand.

  3. Evaluation of the spoilage potential of bacteria isolated from spoiled cooked whole tropical shrimp (Penaeus vannamei) stored under modified atmosphere packaging

    OpenAIRE

    Mace, Sabrina; Cardinal, Mireille; Jaffres, Emmanuel; Cornet, Josiane; Lalanne, Valerie; Chevalier, Frederique; Serot, Thierry; Pilet, Marie-france; Dousset, Xavier; Joffraud, Jean-jacques

    2014-01-01

    The spoilage potential of isolates belonging to five bacterial groups/species (Shewanella baltica, Carnobacterium maltaromaticum, Aeromonas salmonicida, Vibrio sp., “other Gamma-Proteobacteria” [containing one strain of Pseudoalteromonas sp. and one strain of Psychrobacter sp.]) isolated from spoiled cooked and whole tropical shrimp stored under modified atmosphere packaging (MAP) was evaluated by inoculation into ionized cooked and peeled tropical shrimp followed by storage for 32 days at 8°...

  4. Hydrological characteristics of Japanese rock

    International Nuclear Information System (INIS)

    Ijiri, Yuji; Sawada, Atsushi; Akahori, Kuniaki

    1999-11-01

    It is crucial to evaluate the hydrogeological characteristics of rock in Japan in order to assess the performance of geosphere. This report summarizes the hydrogeological characteristics of various rock types obtained from broad literature surveys and the fields experiments at the Kamaishi mine in northern Japan and at the Tono mine in central Japan. It is found that the hydraulic conductivity of rock mass ranges from 10 -9 m/s to 10 -8 m/s, whereas the hydraulic conductivity of fault zone ranges from 10 -9 m/s to 10 -3 m/s. It is also found that the hydraulic conductivity tends to decrease with depth. Therefore, the hydraulic conductivity of rock mass at the depth of a repository will be smaller than above values. From the investigations at outcrops and galleries throughout the country, fractures are observed as potential pathways in all rock types. All kinds of crystalline rocks and pre-Neogene sedimentary rocks are classified as fractured media where fracture flow is dominant. Among these rocks, granitic rock is considered the archetype fractured media. On the other hand, andesite, tuff and Neogene sedimentary rocks are considered as intermediate between fractured media and porous media where flow in fractures as well as in rock matrix are significant. (author)

  5. Development of artificial soft rock

    International Nuclear Information System (INIS)

    Kishi, Kiyoshi

    1995-01-01

    When foundation base rocks are deeper than the level of installing structures or there exist weathered rocks and crushed rocks in a part of base rocks, often sound artificial base rocks are made by substituting the part with concrete. But in the construction of Kashiwazaki Kariwa Nuclear Power Station of Tokyo Electric Power Co., Inc., the foundation base rocks consist of mudstone, and the stiffness of concrete is large as compared with the surrounding base rocks. As the quality of the substituting material, the nearly same stiffness as that of the surrounding soft rocks and long term stability are suitable, and the excellent workability and economical efficiency are required, therefore, artificial soft rocks were developed. As the substituting material, the soil mortar that can obtain the physical property values in stable form, which are similar to those of Nishiyama mudstone, was selected. The mechanism of its hardening and the long term stability, and the manufacturing plant are reported. As for its application to the base rocks of Kashiwazaki Kariwa Nuclear Power Station, the verification test at the site and the application to the base rocks for No. 7 plant reactor building and other places are described. (K.I.)

  6. Integration of thermal digital 3D model and a MASW (Multichannel Analysis of Surface Wave as a means of improving monitoring of spoil tip stability

    Directory of Open Access Journals (Sweden)

    Lewińska Paulina

    2018-01-01

    Full Text Available Spoil tips are anthropogenic terrain structures built of leftover (coal mining materials. They consist mostly of slate and sandstone or mudstone but also include coal and highly explosive coal dust. Coal soil tip fires cause an irreversible degradation to the environment. Government organizations notice the potential problem of spoil tip hazard and are looking for ways of fast monitoring of their temperature and inside structure. In order to test new monitoring methods an experimental was performed in the area of spoil tip of Lubelski Węgiel „Bogdanka” S.A. A survey consisted of creating a 3D discreet thermal model. This was done in order to look for potential fire areas. MASW (Multichannel analysis of surface wave was done in order to find potential voids within the body of a tip. Existing data was digitalized and a 3D model of object’s outside and inside was produced. This article provides results of this survey and informs about advantages of such an approach.

  7. Integration of thermal digital 3D model and a MASW (Multichannel Analysis of Surface Wave) as a means of improving monitoring of spoil tip stability

    Science.gov (United States)

    Lewińska, Paulina; Matuła, Rafał; Dyczko, Artur

    2018-01-01

    Spoil tips are anthropogenic terrain structures built of leftover (coal) mining materials. They consist mostly of slate and sandstone or mudstone but also include coal and highly explosive coal dust. Coal soil tip fires cause an irreversible degradation to the environment. Government organizations notice the potential problem of spoil tip hazard and are looking for ways of fast monitoring of their temperature and inside structure. In order to test new monitoring methods an experimental was performed in the area of spoil tip of Lubelski Węgiel "Bogdanka" S.A. A survey consisted of creating a 3D discreet thermal model. This was done in order to look for potential fire areas. MASW (Multichannel analysis of surface wave) was done in order to find potential voids within the body of a tip. Existing data was digitalized and a 3D model of object's outside and inside was produced. This article provides results of this survey and informs about advantages of such an approach.

  8. Correlating P-wave Velocity with the Physico-Mechanical Properties of Different Rocks

    Science.gov (United States)

    Khandelwal, Manoj

    2013-04-01

    In mining and civil engineering projects, physico-mechanical properties of the rock affect both the project design and the construction operation. Determination of various physico-mechanical properties of rocks is expensive and time consuming, and sometimes it is very difficult to get cores to perform direct tests to evaluate the rock mass. The purpose of this work is to investigate the relationships between the different physico-mechanical properties of the various rock types with the P-wave velocity. Measurement of P-wave velocity is relatively cheap, non-destructive and easy to carry out. In this study, representative rock mass samples of igneous, sedimentary, and metamorphic rocks were collected from the different locations of India to obtain an empirical relation between P-wave velocity and uniaxial compressive strength, tensile strength, punch shear, density, slake durability index, Young's modulus, Poisson's ratio, impact strength index and Schmidt hammer rebound number. A very strong correlation was found between the P-wave velocity and different physico-mechanical properties of various rock types with very high coefficients of determination. To check the sensitivity of the empirical equations, Students t test was also performed, which confirmed the validity of the proposed correlations.

  9. Two-Dimensional Spoiled Gradient-Recalled Echo Magnetic Resonance Imaging of the Liver Using Respiratory Navigator-Gating Techniques.

    Science.gov (United States)

    Inoue, Yusuke; Hata, Hirofumi; Matsunaga, Keiji; Nakajima, Ai; Komi, Shotaro; Abe, Yutaka; Miyatake, Hiroki

    We assessed the feasibility of T1-weighted 2-dimensional spoiled gradient-recalled (2D SPGR) acquisition in steady-state imaging of the liver with various respiratory navigator gating techniques. A total of 12 healthy volunteers underwent in-phase and out-of-phase 2D SPGR imaging of the liver during breath-holding and free-breathing. Four techniques for respiratory navigation, 2 conventional navigator techniques and 2 self-navigator techniques, were used for free-breathing imaging. Good navigator waveforms were obtained in conventional navigation, whereas fluctuations were evident in self navigation. All of the 4 navigator-based methods provided better images in terms of background signals and visual image quality compared with images obtained with no respiratory control. However, differences remained in comparison with breath-holding. Superiority of self-navigation to conventional navigation was not shown. Navigator-gating techniques improved 2D SPGR images of the liver acquired during free-breathing, suggesting feasibility and beneficial effects, although navigator-based images were still inferior to breath-hold images.

  10. Plant Communities Rather than Soil Properties Structure Arbuscular Mycorrhizal Fungal Communities along Primary Succession on a Mine Spoil

    Directory of Open Access Journals (Sweden)

    Petr Kohout

    2017-04-01

    Full Text Available Arbuscular mycorrhizal fungal (AMF community assembly during primary succession has so far received little attention. It remains therefore unclear, which of the factors, driving AMF community composition, are important during ecosystem development. We addressed this question on a large spoil heap, which provides a mosaic of sites in different successional stages under different managements. We selected 24 sites of c. 12, 20, 30, or 50 years in age, including sites with spontaneously developing vegetation and sites reclaimed by alder plantations. On each site, we sampled twice a year roots of the perennial rhizomatous grass Calamagrostis epigejos (Poaceae to determine AMF root colonization and diversity (using 454-sequencing, determined the soil chemical properties and composition of plant communities. AMF taxa richness was unaffected by site age, but AMF composition variation increased along the chronosequences. AMF communities were unaffected by soil chemistry, but related to the composition of neighboring plant communities of the sampled C. epigejos plants. In contrast, the plant communities of the sites were more distinctively structured than the AMF communities along the four successional stages. We conclude that AMF and plant community successions respond to different factors. AMF communities seem to be influenced by biotic rather than by abiotic factors and to diverge with successional age.

  11. Aluminum-Tolerant Pisolithus Ectomycorrhizas Confer Increased Growth, Mineral Nutrition, and Metal Tolerance to Eucalyptus in Acidic Mine Spoil

    Directory of Open Access Journals (Sweden)

    Louise Egerton-Warburton

    2015-01-01

    Full Text Available Ectomycorrhizal fungi (ECM may increase the tolerance of their host plants to Al toxicity by immobilizing Al in fungal tissues and/or improving plant mineral nutrition. Although these benefits have been demonstrated in in vitro (pure culture or short-term nutrient solution (hydroponic experiments, fewer studies have examined these benefits in the field. This study examined the growth, mineral nutrition, and Al levels in two Eucalyptus species inoculated with three Pisolithus ecotypes that varied in Al tolerance (in vitro and grown in mine spoil in the greenhouse and field. All three ecotypes of Pisolithus improved Eucalyptus growth and increased host plant tolerance to Al in comparison to noninoculated plants. However, large variations in plant growth and mineral nutrition were detected among the Pisolithus-inoculated plants; these differences were largely explained by the functional properties of the Pisolithus inoculum. Seedlings inoculated with the most Al-tolerant Pisolithus inoculum showed significantly higher levels of N, P, Ca, Mg, and K and lower levels of Al than seedlings inoculated with Al-sensitive ecotypes of Pisolithus. These findings indicate an agreement between the fungal tolerance to Al in vitro and performance in symbiosis, indicating that both ECM-mediated mineral nutrient acquisition and Al accumulation are important in increasing the host plant Al tolerance.

  12. CCR7 expressing mesenchymal stem cells potently inhibit graft-versus-host disease by spoiling the fourth supplemental Billingham's tenet.

    Directory of Open Access Journals (Sweden)

    Hong Li

    Full Text Available The clinical acute graft-versus-host disease (GvHD-therapy of mesenchymal stem cells (MSCs is not as satisfactory as expected. Secondary lymphoid organs (SLOs are the major niches serve to initiate immune responses or induce tolerance. Our previous study showed that CCR7 guide murine MSC line C3H10T1/2 migrating to SLOs. In this study, CCR7 gene was engineered into murine MSCs by lentivirus transfection system (MSCs/CCR7. The immunomodulatory mechanism of MSCs/CCR7 was further investigated. Provoked by inflammatory cytokines, MSCs/CCR7 increased the secretion of nitric oxide and calmed down the T cell immune response in vitro. Immunofluorescent staining results showed that transfused MSCs/CCR7 can migrate to and relocate at the appropriate T cell-rich zones within SLOs in vivo. MSCs/CCR7 displayed enhanced effect in prolonging the survival and alleviating the clinical scores of the GvHD mice than normal MSCs. Owing to the critical relocation sites, MSCs/CCR7 co-infusion potently made the T cells in SLOs more naïve like, thus control T cells trafficking from SLOs to the target organs. Through spoiling the fourth supplemental Billingham's tenet, MSCs/CCR7 potently inhibited the development of GvHD. The study here provides a novel therapeutic strategy of MSCs/CCR7 infusion at a low dosage to give potent immunomodulatory effect for clinical immune disease therapy.

  13. Relationship between the trochlear groove angle and patellar cartilage morphology defined by 3D spoiled gradient-echo imaging

    Energy Technology Data Exchange (ETDEWEB)

    Harada, Yuko; Tokuda, Osamu; Matsunaga, Naofumi [Yamaguchi University Graduate School of Medicine, Department of Radiology, Yamaguchi (Japan); Fukuda, Kouji [Shunan Memorial Hospital, Division of Radiological Technology, Yamaguchi (Japan); Shiraishi, Gen; Motomura, Tetsuhisa [Shunan Memorial Hospital, Department of Orthopedics Surgery, Yamaguchi (Japan); Kimura, Motoichi [Customer Application Gr., GE Healthcare MR Sales and Marketing Department, Osaka (Japan)

    2012-05-15

    To examine whether the femoral trochlear groove angle (TGA) is a determinant of the patellar cartilage volume and patellar cartilage damage. Patellar cartilage was evaluated by MR imaging in 66 patients (22 males and 44 females) with knee pain. Fat-suppressed 3D spoiled gradient-echo images were used to calculate the cartilage volume and to grade the cartilage damage. The proximal and distal TGAs were measured from axial PD-weighted FSE MR images with fat suppression. For every increase in the TGA at the distal femur, the patellar cartilage volume was significantly increased by 6.07 x 10{sup -3} cm{sup 3} (95% CI: 1.27 x 10{sup -3}, 10.9 x 10{sup -3}) after adjustment for age, gender, and patellar bone volume (P < 0.05). The MR grade of medial patellar cartilage damage progressed as the distal TGA became narrower, although there was no significant correlation between the distal TGA and the MR grading of patellar cartilage damage. A more flattened distal TGA was associated with increased patellar cartilage volume. However, there was no association between TGA and patellar cartilage defects. (orig.)

  14. Multiparameter estimation using multi-echo spoiled gradient echo with variable flip angles and multicontrast compressed sensing.

    Science.gov (United States)

    Tamada, Daiki; Wakayama, Tetsuya; Onishi, Hiroshi; Motosugi, Utaroh

    2018-02-24

    To develop multiparameter mapping including T 1 , R2*, and proton density fat fraction with a single breath-hold to evaluate liver disease and liver function. A 6-echo spoiled gradient-echo sequence with dual flip angles was used to acquire a 12-set MRI volume data set. To shorten the scan time, undersampling and multicontrast compressed-sensing reconstruction were used. The scan time was 18 seconds. R2* and proton density fat fraction mapping were achieved by using the iterative least-squares method. T 1 mapping was estimated using driven equilibrium single-pulse observation of T 1 . Quantitative values were validated by performing phantom and volunteer studies. Statistical analysis showed that the quantitative values measured using the proposed methods agreed with those measured using conventional methods. T 1 values of water proton measured by the proposed method in phantom and volunteer studies were in good agreement with those by MRS. The results showed that accurate quantitative mapping of T 1 , R2*, and proton density fat fraction with a single breath-hold was achieved using our approach. © 2018 International Society for Magnetic Resonance in Medicine.

  15. Richness, diversity and evenness of vegetation upon rehabilitation of gypsum mine spoiled lands in the Indian arid zone

    Science.gov (United States)

    Kumar, S.; Sharma, K.D.; Sharma, U.K.; Gough, L.P.

    1998-01-01

    Richness, diversity and evenness of vegetation, after rehabilitation of gypsum mine spoils at Barmer were investigated in plots protected and planted one year and four years ago. There were four water harvesting treatments, viz., half-moon terraces, micro-catchments with 5% slope, ridge and furrow and control, wherein, indigenous and exotic trees and shrubs were planted at 5 ?? 5 m spacing. Sampling of the planted and natural vegetation, using quadrats and transacts, revealed much less species richness in unplanted control as compared to all treatments and in all the years. The species richness that increased initially (within one year) gradually declined over time (during four year), though the extent varied in different treatments. The water harvesting treatment showing maximum initial increase in richness also showed maximum decline over time, though decline was more in annual species. Two perennial species increased in richness with time. This was further proved from the trends in diversity and evenness indices. It was concluded that natural successional process was accelerated by rehabilitation providing stability to the habitat.

  16. Experimental Study on Color Durability of Color Asphalt Pavement

    Science.gov (United States)

    Ning, Shi; Huan, Su

    2017-06-01

    Aiming at the poor Color durability and the lack of research on Color asphalt pavement, spraying an anti-tire trace seal resin emulsion on the surface, a Color durable asphalt pavement was proposed. After long-term rolling and long-term aging test, the Color durability was evaluated by RGB function in Photoshop and trace residue rate formula. Test results proved that the Evaluation method was simple and effective. After long-term rolling, the Color of the road surface tends to a constant value. Spraying the emulsion on the road surface can resist tire traces. After long-term aging test, the resistance to tire traces was increased by 26.6% compared with the conventional type, while the former was 44.1% higher than the latter without long-term aging. The Color durable asphalt pavement can effectively improve the ability of Color asphalt pavement to resist tire traces, and significantly improve the Color durability of Color asphalt pavement.

  17. A structural bond strength model for glass durability

    International Nuclear Information System (INIS)

    Feng, Xiangdong; Metzger, T.B.

    1996-01-01

    A glass durability model, structural bond strength (SBS) model was developed to correlate glass durability with its composition. This model assumes that the strengths of the bonds between cations and oxygens and the structural roles of the individual elements in the glass arc the predominant factors controlling the composition dependence of the chemical durability of glasses. The structural roles of oxides in glass are classified as network formers, network breakers, and intermediates. The structural roles of the oxides depend upon glass composition and the redox state of oxides. Al 2 O 3 , ZrO 2 , Fe 2 O 3 , and B 2 O 3 are assigned as network formers only when there are sufficient alkalis to bind with these oxides. CaO can also improve durability by sharing non-bridging oxygen with alkalis, relieving SiO 2 from alkalis. The percolation phenomenon in glass is also taken into account. The SBS model is applied to correlate the 7-day product consistency test durability of 42 low-level waste glasses with their composition with an R 2 of 0.87, which is better than 0.81 obtained with an eight-coefficient empirical first-order mixture model on the same data set

  18. From stones to rocks

    Science.gov (United States)

    Mortier, Marie-Astrid; Jean-Leroux, Kathleen; Cirio, Raymond

    2013-04-01

    With the Aquila earthquake in 2009, earthquake prediction is more and more necessary nowadays, and people are waiting for even more accurate data. Earthquake accuracy has increased in recent times mainly thanks to the understanding of how oceanic expansion works and significant development of numerical seismic prediction models. Despite the improvements, the location and the magnitude can't be as accurate as citizen and authorities would like. The basis of anticipating earthquakes requires the understanding of: - The composition of the earth, - The structure of the earth, - The relations and movements between the different parts of the surface of the earth. In order to answer these questions, the Alps are an interesting field for students. This study combines natural curiosity about understanding the predictable part of natural hazard in geology and scientific skills on site: observing and drawing landscape, choosing and reading a representative core drilling, replacing the facts chronologically and considering the age, the length of time and the strength needed. This experience requires students to have an approach of time and space radically different than the one they can consider in a classroom. It also limits their imagination, in a positive way, because they realize that prediction is based on real data and some of former theories have become present paradigms thanks to geologists. On each location the analyzed data include landscape, core drilling and the relation established between them by students. The data is used by the students to understand the meaning, so that the history of the formation of the rocks tells by the rocks can be explained. Until this year, the CBGA's perspective regarding the study of the Alps ground allowed students to build the story of the creation and disappearance of the ocean, which was a concept required by French educational authorities. But not long ago, the authorities changed their scientific expectations. To meet the

  19. Properties and durability of metakaolin blended cements

    Directory of Open Access Journals (Sweden)

    Ezzat, El-Sayed

    2010-09-01

    Full Text Available This paper evaluates the optimal calcination temperature and replacement ratio to ensure high metakaolin (MK pozzolanicity in blended cement. The MK used was prepared by firing two types of local at temperatures ranging from 700 to 850 ºC. Dry blends of ordinary Portland cement (OPC and varying proportions of MK were mixed with the amount of water required to ensure optimal consistency of the resulting pastes. The specimens were cured at 100% RH for 24 h and then immersed in water for 3, 7, 28, 90 or 180 days. At each test time, the degree of hydration and compressive strength of the hardened cement pastes were measured The findings showed that the most suitable calcination temperature to obtain metakaolin is 700 ºC, while the optimal replacement ratio ranges from 25 to 30%. DTA was used to determine the phases comprising the hydration products forming at the ages studied. Pure OPC and OPC-MK specimens were immersed in 3% NaCl and 5% MgSO4 solutions for 30, 90 and 180 days to measure their durability. The OPC-MK pastes immersed in the 3% NaCl solution were observed to be highly resistant to chloride attack.

    El presente trabajo evalúa el comportamiento puzolánico de metacaolín (MK, producto de la calcinación a distintas temperaturas de dos tipos de caolín local de composiciones químicas diferentes, al incorporarse al cemento en diferentes proporciones. Se preparó un cemento adicionado mediante la mezcla en seco de cemento Portland ordinario (OPC y metacaolín (MK, a los que se añadió la cantidad óptima de agua para obtener una pasta de la consistencia deseada. Las probetas se curaron a una HR del 100% durante 24 horas, sumergiéndose posteriormente en agua durante 3, 7, 28, 90 o 180 días. A cada tiempo de ensayo se controló el grado de hidratación de las pastas endurecidas y se comprobó la resistencia a la compresión de las probetas cúbicas a las edades de curado establecidas. Los resultados obtenidos indican que la

  20. Durability reliability analysis for corroding concrete structures under uncertainty

    Science.gov (United States)

    Zhang, Hao

    2018-02-01

    This paper presents a durability reliability analysis of reinforced concrete structures subject to the action of marine chloride. The focus is to provide insight into the role of epistemic uncertainties on durability reliability. The corrosion model involves a number of variables whose probabilistic characteristics cannot be fully determined due to the limited availability of supporting data. All sources of uncertainty, both aleatory and epistemic, should be included in the reliability analysis. Two methods are available to formulate the epistemic uncertainty: the imprecise probability-based method and the purely probabilistic method in which the epistemic uncertainties are modeled as random variables. The paper illustrates how the epistemic uncertainties are modeled and propagated in the two methods, and shows how epistemic uncertainties govern the durability reliability.

  1. Durability/life of fiber composites in hygrothermomechanical environments

    Science.gov (United States)

    Chamis, C. C.; Sinclair, J. H.

    1982-01-01

    Statistical analysis and multiple regression were used to determine and quantify the significant hygrothermomechanical variables which influence the tensile durability/life (cycle loading, fatigue) of boron-fiber/epoxy-matrix (B/E) and high-modulus-fiber/epoxy-matrix (HMS/E) composites. The use of the multiple regression analysis reduced the variables from fifteen, assumed initially, to six or less with a probability of greater than 0.999. The reduced variables were used to derive predictive models for compression and intralaminar shear durability/life of B/E and HMS/E composites assuming isoparametric fatigue behavior. The predictive models were subsequently generalized to predict the durability/life of graphite/fiber-r generalized model is of simple form, predicts conservative values compared with measured data and should be adequate for use in preliminary designs. Previously announced in STAR as N82-14287

  2. A smart rock

    Science.gov (United States)

    Pressel, Phil

    2014-12-01

    This project was to design and build a protective weapon for a group of associations that believed in aliens and UFO's. They collected enough contributions from societies and individuals to be able to sponsor and totally fund the design, fabrication and testing of this equipment. The location of this facility is classified. It also eventually was redesigned by the Quartus Engineering Company for use at a major amusement park as a "shoot at targets facility." The challenge of this project was to design a "smart rock," namely an infrared bullet (the size of a gallon can of paint) that could be shot from the ground to intercept a UFO or any incoming suspicious item heading towards the earth. Some of the challenges to design this weapon were to feed cryogenic helium at 5 degrees Kelvin from an inair environment through a unique rotary coupling and air-vacuum seal while spinning the bullet at 1500 rpm and maintain its dynamic stability (wobble) about its spin axis to less than 10 micro-radians (2 arc seconds) while it operated in a vacuum. Precision optics monitored the dynamic motion of the "smart rock."

  3. Rock Properties Model

    International Nuclear Information System (INIS)

    Lum, C.

    2004-01-01

    The purpose of this model report is to document the Rock Properties Model version 3.1 with regard to input data, model methods, assumptions, uncertainties and limitations of model results, and qualification status of the model. The report also documents the differences between the current and previous versions and validation of the model. The rock properties model provides mean matrix and lithophysae porosity, and the cross-correlated mean bulk density as direct input to the ''Saturated Zone Flow and Transport Model Abstraction'', MDL-NBS-HS-000021, REV 02 (BSC 2004 [DIRS 170042]). The constraints, caveats, and limitations associated with this model are discussed in Section 6.6 and 8.2. Model validation accomplished by corroboration with data not cited as direct input is discussed in Section 7. The revision of this model report was performed as part of activities being conducted under the ''Technical Work Plan for: The Integrated Site Model, Revision 05'' (BSC 2004 [DIRS 169635]). The purpose of this revision is to bring the report up to current procedural requirements and address the Regulatory Integration Team evaluation comments. The work plan describes the scope, objectives, tasks, methodology, and procedures for this process

  4. Rock critics as 'Mouldy Modernists'

    Directory of Open Access Journals (Sweden)

    Becky Shepherd

    2011-09-01

    Full Text Available Contemporary rock criticism appears to be firmly tied to the past. The specialist music press valorise rock music of the 1960s and 1970s, and new emerging artists are championed for their ‘retro’ sounding music by journalists who compare the sound of these new artists with those included in the established ‘canon’ of rock music. This article examines the narrative tropes of authenticity and nostalgia that frame the retrospective focus of this contemporary rock writing, and most significantly, the maintenance of the rock canon within contemporary popular culture. The article concludes by suggesting that while contemporary rock criticism is predominately characterised by nostalgia, this nostalgia is not simply a passive romanticism of the past. Rather, this nostalgia fuels a process of active recontextualisation within contemporary popular culture.

  5. Le développement durable comme compromis

    OpenAIRE

    Gariépy, Martine

    2016-01-01

    Corinne Gendron est titulaire de la Chaire de responsabilité sociale et de développement durable à l’Université du Québec à Montréal (UQAM). Professeure à l’école des sciences de la gestion de l’UQAM, elle a notamment écrit sur le développement durable, la responsabilité sociale de l’entreprise, la gestion environnementale et la norme ISO 14001. Dans le présent ouvrage, l’auteure propose un cadre d’analyse qui inclut dynamique sociale dans la transition vers une économie qui prenne en compte ...

  6. Hardness and durability of ring plate valves of piston compressors

    Energy Technology Data Exchange (ETDEWEB)

    Afonskaya, V.V.; Gor' kov, B.A.; Moskvitin, K.S.; Pishchik, L.Ya.

    1982-09-01

    At the Moscow Coke and Gas Plant an air compressor has been used to investigate fractured plates of type 30KhGSA steel with HRC hardness values of 32-51. A Rockwell instrument was used to measure the hardness of each fractured plate (10 impressions each side) and each plate was checked by a magnetic luminscence method on a type LD-4 instrument to detect cracks. Finds that the most durable are valve plates made of type 30KhGSA steel and having a HRC of 43-46 after heat treatment. Notes that the most durable valve plates had the least sensitivity to stress concentration created by fatigue cracks.

  7. Durability evaluation method on rebar corrosion of reinforced concrete

    International Nuclear Information System (INIS)

    Kitsutaka, Yoshinori

    2013-01-01

    In this paper, method on the durability evaluation in nuclear power plant concrete structures was investigated. In view of the importance of evaluating the degree of deterioration of reinforced concrete structures, relationships should be formulated among the number of years elapsed, t, the amount of action of a deteriorative factor, F, the degree of material deterioration, D, and the performance of the structure, P. Evaluation by PDFt diagrams combining these relationships may be effective. A detailed procedure of durability evaluation for a reinforced concrete structure using PDFt concept is presented for the deterioration of rebar corrosion caused by neutralization and penetration of salinity by referring to the recent papers. (author)

  8. Highly durable and low permeable concrete for LLW facilities

    International Nuclear Information System (INIS)

    Yanagibashi, Kunio; Saito, Toshio; Odagawa, Masaro.

    1997-01-01

    Concrete used for LLW facilities is required to be highly durable. The authors evaluated concrete containing glycol ether derivatives and silica fume as admixtures. Compressive strength, diffusion coefficient of water, depth of accelerated carbonation, drying shrinkage, depth of chlorides penetration and resistance to freezing and thawing were investigated using concrete specimens. Compressive strength, depth of accelerated carbonation, diffusion coefficient of 137 Cs were investigated using mortar specimens before and after irradiation of gamma rays. Results showed that using glycol ether derivatives and silica fume was effective in improving the durability. (author)

  9. Rock.XML - Towards a library of rock physics models

    Science.gov (United States)

    Jensen, Erling Hugo; Hauge, Ragnar; Ulvmoen, Marit; Johansen, Tor Arne; Drottning, Åsmund

    2016-08-01

    Rock physics modelling provides tools for correlating physical properties of rocks and their constituents to the geophysical observations we measure on a larger scale. Many different theoretical and empirical models exist, to cover the range of different types of rocks. However, upon reviewing these, we see that they are all built around a few main concepts. Based on this observation, we propose a format for digitally storing the specifications for rock physics models which we have named Rock.XML. It does not only contain data about the various constituents, but also the theories and how they are used to combine these building blocks to make a representative model for a particular rock. The format is based on the Extensible Markup Language XML, making it flexible enough to handle complex models as well as scalable towards extending it with new theories and models. This technology has great advantages as far as documenting and exchanging models in an unambiguous way between people and between software. Rock.XML can become a platform for creating a library of rock physics models; making them more accessible to everyone.

  10. Mechanical Properties and Durability of "Waterless Concrete"

    Science.gov (United States)

    Toutanji, Houssam; Grugel, Richard N.

    2008-01-01

    Waterless concrete consists of molten elementary sulfur and aggregate. The aggregates in lunar environment will be lunar rocks and soil. Sulfur is present on the Moon in Troilite soil (FeS) and by oxidation soil iron and sulfur can be produced. Iron can be used to reinforce the sulfur concrete. Sulfur concrete specimens were cycled between liquid nitrogen (approximately 191 C) and room temperature (approximately 21 C) to simulate exposure to a lunar environment. Cycled and control specimens were subsequently tested in compression at room temperatures (approximately 21 C) and approximately 101 C. Test results showed that due to temperature cycling, compressive strength of cycled specimens was 20% of those non-cycled. Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate material whereas it was seen well bonded in those non-cycled. This reduction in strength can be attributed to the large differences in thermal coefficients of expansion of the materials constituting the concrete which promoted cracking. Similar sulfur concrete mixtures were strengthened with short and long glass fibers. The glass fibers from lunar regolith simulant was melted in a 25 cc Pt-Rh crucible in a Sybron Thermoline high temperature MoSi2 furnace at melting temperatures of 1450 to 1600 C for times of 30 min to 1 hour. Glass fibers were cast from the melt into graphite crucibles and were annealed for a couple of hours at 600 C. Glass fibers and small rods were pulled from the melt. The glass melt wets the ceramic rod and long continuous glass fibers were easily hand drawn. The glass fibers were immediately coated with a protective polymer to maintain the mechanical strength. The glass fibers were used to reinforce sulfur concrete plated to improve the flexural strength of the sulfur concrete. Prisms beams strengthened with glass fibers were tested in 4-point bending test. Beams strengthened with glass fiber showed to

  11. Rock and soil rheology

    International Nuclear Information System (INIS)

    Cristescu, N.; Ene, H.I.

    1988-01-01

    The aim of the Euromech Colloquium 196 devoted to Rock and Soil Rheology is to review some of the main results obtained in the last years in this field of research and also to formulate some of the major not yet solved problems which are now under consideration. Exchange of opinions and scientific discussions are quite helpful mainly in those areas where some approaches are controversial and the progress made is quite fast. That is especially true for the rheology of geomaterials, domain of great interest for mining and petroleum engineers, engineering geology, seismology, geophysics, civil engineering, nuclear and industrial waste storage, geothermal energy storage, caverns for sports, culture, telecommunications, storage of goods and foodstuffs (cold, hot and refrigerated storages), underground oil and natural gas reservoirs etc. Some of the last obtained results are mentioned in the present volume. (orig./HP)

  12. Rock the Globe

    CERN Multimedia

    Laëtitia Pedroso

    2010-01-01

    Created in 2005, the Swiss rock band "Wind of Change" is now candidate for the Eurovision Song Contest 2011 with a new song " Night & Light " with the music video filmed at CERN.   With over 20 gigs under their belt and two albums already released, the five members of the band (Alex Büchi, vocals; Arthur Spierer, drums; David Gantner, bass; Romain Mage and Yannick Gaudy, guitar) continue to excite audiences. For their latest composition "Night & Light", the group filmed their music video in the Globe of Science and Innovation. Winning the Eurovision contest would be a springboard in their artistic career for these young musicians. The selection results will be available December 11, 2010.      

  13. Durability studies relevant to marine equipment

    Science.gov (United States)

    Mantzavinos, Dimitris

    The corrosion behaviour of two copper-nickel alloys, namely Cu-30%Ni and Cu- 10%Ni, commercially pure titanium and two titanium alloys (T1-6A1-4V and Ti:5111) has been examined in environments of relevance to desalination and other marine equipment. The investigation was focused on two extremes of environments, pure water and high-velocity (with and without suspended solids) saline water. These represent conditions in which operational problems have been experienced or are anticipated and in relation to which very little information on basic durability is available. This work contained only brief experiments in quiescent seawater which has been studied in abundance previously; such tests were included in this research for background and comparison purposes only. The study involved exposure of specimens to distilled water (1.5-7 S/cm) at 20° - 80°C with and without injected carbon dioxide. At 20°C upon initial exposure to distilled water, the 10%Ni alloy exhibited somewhat active corrosion behaviour during anodic polarisation potentiodynamic scans, but after a few days' exposure, more-passive behaviour of both alloys was indicated with the 30%Ni material demonstrating better corrosion resistance than the lower-nickel alloy. This relative behaviour was replicated in comparative tests conducted in 3.5% NaCl at 20°C in which the corrosion resistance of Cu-30%Ni was clearly greater than that displayed by the lower-Ni alloy. However, at higher temperatures in distilled water, the superiority of the 30%Ni alloy was less evident especially in the presence of dissolved carbon dioxide. Microscopical examination of specimens revealed a susceptibility to general corrosion with 'etched' surfaces and also pitting attack which seemed to have a lesser effect on Cu-10%Ni than Cu-30%Ni. Certainly at short exposure times, titanium, titanium alloys and UNS S31603 stainless steel (used for comparison purposes) exhibited considerably superior coiTOsion resistance than the copper

  14. Phytoremediation of heavy metal contaminated soil potential by woody plants on Tonglushan ancient copper spoil heap in China.

    Science.gov (United States)

    Kang, Wei; Bao, Jianguo; Zheng, Jin; Xu, Fen; Wang, Liuming

    2018-01-02

    Fast-growing metal-accumulating woody plants are considered potential candidates for phytoremediation of metals. Tonglushan mining, one of the biggest Cu production bases in China, presents an important source of the pollution of environment. The sample was collected at Tonglushan ancient copper spoil heap. The aims were to measure the content of heavy metal in the soil and woody plants and to elucidate the phytoremediation potential of the plants. The result showed that soil Cu, Cd and Pb were the main contamination, the mean contents of which were 3166.73 mg/kg, 3.66 mg/kg and 137.06 mg/kg respectively, which belonged to severe contamination. Fourteen species from 14 genera of 13 families were collected and investigated; except for Ligutrum lucidum, the other 13 woody plants species were newly recorded in this area. In addition, to assess the ability of metal accumulation of these trees, we proposed accumulation index. Data suggested that Platanus × acerilolia, Broussonetia papyrifera, Ligutrum lucidum, Viburnum awabuki, Firmiana simplex, Robina pseudoacacia, Melia azedarach and Osmanthus fragrans exhibited high accumulated capacity and strong tolerance to heavy metals. Therefore, Platanus × acerilolia and Broussonetia papyrifera can be planted in Pb contaminated areas; Viburnum awabuki, Firmiana simplex, Robina pseudoacacia and Melia azedarach are the suitable trees for Cd contaminated areas; Viburnum awabuki, Melia azedarach, Ligutrum lucidum, Firmiana simplex, Osmanthus fragrans and Robina pseudoacacia are appropriate to Cu, Pb and Cd multi-metal contaminated areas.

  15. Biosurfactant-producing bacterium, Pseudomonas aeruginosa MA01 isolated from spoiled apples: physicochemical and structural characteristics of isolated biosurfactant.

    Science.gov (United States)

    Abbasi, Habib; Hamedi, Mir Manochehr; Lotfabad, Tayebe Bagheri; Zahiri, Hossein Shahbani; Sharafi, Hakimeh; Masoomi, Fatemeh; Moosavi-Movahedi, Ali Akbar; Ortiz, Antonio; Amanlou, Massoud; Noghabi, Kambiz Akbari

    2012-02-01

    An extensive investigation was conducted to isolate indigenous bacterial strains with outstanding performance for biosurfactant production from different types of spoiled fruits, food-related products and food processing industries. An isolate was selected from 800 by the highest biosurfactant yield in soybean oil medium and it was identified by 16S rRNA and the two most relevant hypervariable regions of this gene; V3 and V6 as Pseudomonas aeruginosa MA01. The isolate was able to produce 12 g/l of a glycolipid-type biosurfactant and generally less efficient to emulsify vegetable oils compared to hydrocarbons and could emulsify corn and coconut oils more than 50%. However, emulsification index (E(24)) of different hydrocarbons including hexane, toluene, xylene, brake oil, kerosene and hexadecane was between 55.8% and 100%. The surface tension of pure water decreased gradually with increasing biosurfactant concentration to 32.5 mNm(-1) with critical micelle concentration (CMC) value of 10.1mg/l. Among all carbon substrates examined, vegetable oils were the most effective on biosurfactant production. Two glycolipid fractions were purified from the biosurfactant crude extracts, and FTIR and ES-MS were used to determine the structure of these compounds. The analysis indicated the presence of three major monorhamnolipid species: R(1)C(10)C(10), R(1)C(10)C(12:1), and R(1)C(10)C(12); as well as another three major dirhamnolipid species: R(2)C(10)C(10), R(2)C(10)C(12:1), and R(2)C(10)C(12). The strain sweep experiment for measuring the linear viscoelastic of biosurfactant showed that typical behavior characteristics of a weak viscoelastic gel, with storage modulus greater than loss modulus at all frequencies examined, both showing some frequency dependence. Copyright © 2011 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  16. Mycorrhizal status of plants in two successional stages on spoil heaps from fireloam mining in Lower Silesia (SW Poland

    Directory of Open Access Journals (Sweden)

    Dorota Kasowska

    2014-01-01

    Full Text Available The mycorrhizal status of two plant communities representing an initial stage (1-2 year-old and a 8-9-year-old stage of succession on spoil heaps from fireloam mining in Lower Silesia, Poland, was determined. In the initial stage, the mycorrhizal structures were not observed in 39% of the investigated species; they were members of the Polygonaceae, Chenopodiaceae and Poaceae families. The relative cover of non-mycorrhizal plants exceeded 50% and the major role was played by the Polygonum aviculare population, which predominated the whole community. Mycorrhizal species (arbuscular mycorrhizae contributed to 61 % of the composition of the initial phyto-coenosis. The most numerous taxa were those with 20-40% of the root length colonized, with a small number of arbuscules (0.2-3.1% of the root length containig arbuscules and no vesicles. In the advanced stage of succession, mycorrhizal plants definitely dominated and the major role was played by the Tussilago farfara population. Compared with the initial stage, the later one also harboured more plants with mycorrhizas occupied >40% of the root length, as well as containing numerous arbuscules (>20% of the root length and vesicles. The non-mycorrhizal species, i.e., Equisetum arvense and Poa compressa, represented 11 % o': the community composition and their relative cover amounted to 3%. Despite the relatively frequent occurrence of the arbuscular mycorrhizae in the initial stage of succession, the qualitative properties of the colonization indicated a low effectiveness of symbiosis. This could be caused by the lack of adaptation of the fungal symbiont to the edaphic conditions which were changed after disturbance.

  17. Laboratory Evaluations of Durability of Southern Pine Pressure Treated With Extractives From Durable Wood Species.

    Science.gov (United States)

    Kirker, G T; Bishell, A B; Lebow, P K

    2016-02-01

    Extracts from sawdust of four naturally durable wood species [Alaskan yellow cedar, AYC, Cupressus nootkanansis D. Don 1824; eastern red cedar, ERC, Juniperus virginiana L.; honey mesquite, HM, Prosopis glandulosa Torr.; and black locust, BL, Robinia pseudoacacia L.] were used to treat southern pine, Pt, Pinus taeda L. sapwood blocks. Extractive treated blocks were evaluated for decay resistance in standard soil bottle fungal assays challenged with brown and white rot decay fungi. Results showed that extractives did impart some improvement to decay resistance of Pt blocks. BL- and HM-treated Pt blocks were also used in choice and no-choice assays to determine feeding preference and damage by eastern subterranean termites (Reticulitermes flavipes) Kollar. Minimal feeding on treated blocks was seen in both choice and no-choice assays. In choice assays, there was similar mortality between HM and BL arenas; however, in no-choice assays, complete mortality was recorded for HM-treated Pt and high mortality was seen with BL-treated Pt. Subsequent dose mortality termite assays showed HM to be effective in killing R. flavipes at low concentrations. Both HM and BL show promise as deterrents or termiticidal protectants and will be further evaluated in field studies. Published by Oxford University Press on behalf of Entomological Society of America 2015. This work is written by US Government employees and is in the public domain in the US.

  18. Durability of alkali-activated fly ash and slag concrete

    NARCIS (Netherlands)

    Arbi Ghanmi, K.; Nedeljkovic, M.; Zuo, Y.; Ye, G.

    2016-01-01

    Alkali-activated materials (AAM) have received increasing interest during the past few decades due to their environmental and technological advantages. However the durability of these binders is still considered as an unproven issue that needs to be addressed before their commercial adoption and

  19. 40 CFR 86.1822-01 - Durability data vehicle selection.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Durability data vehicle selection. 86... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) General Compliance Provisions for Control of Air Pollution From New and In-Use Light-Duty Vehicles, Light...

  20. Durable and Sustainable Road Constructions for Developing Countries

    NARCIS (Netherlands)

    Molenaar, A.A.A.

    2013-01-01

    This paper discusses the possibilities to build durable and sustainable pavement structures in developing countries. Attention will be paid to geometric design aspects which have a significant effect on pavement life. Following this attention will be paid to the importance of controlling wheel loads

  1. Natural durability of heartwoods from European and tropical Africa ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-09-15

    Sep 15, 2009 ... Marine durability of heartwoods obtained from tropical African and European species against marine borer attacks in underwater exposure in Turkish coasts was investigated. Test hangers including wood species of 18 European and 15 African wood species were fastened to test area and exposed at a ...

  2. DURABLE TIMBERS (Ceiba pentandra (L.) Gaertn. and Celtis ...

    African Journals Online (AJOL)

    DEPT OF AGRICULTURAL ENGINEERING

    However, scanty information exists for the efficacy of extracts from tropical timbers in conferring durability, while CCA and other deadly inor- ganic preservative impregnated wood continue to be the commonest treated lumber worldwide amid much apprehension, as they pose health and ecological problems. As would be ex ...

  3. INFLUENCE OF WORKPIECE SURFACE PREPARATION ON THERMAL BARRIER COATING DURABILITY

    Directory of Open Access Journals (Sweden)

    M. A. Petrova

    2014-01-01

    Full Text Available Article deals with the impact of workpiece surface quality on adhesive strength and durability of thermal barrier coating. The result revealed that the roughness of metal layer influences on the adhesion of ceramic coating and depends the thickness of ceramic crystals when using method of Electron beam deposition.

  4. The Effects of Sensitization and Habituation in Durable Goods Markets

    NARCIS (Netherlands)

    G. Liberali (Gui); T.S. Gruca (Thomas); W.M. Nique (Walter)

    2011-01-01

    textabstractWe develop a model to study the impact of changes in price sensitivity on the firm as it introduces multiple generations of a durable product where unit costs are a convex function of quality. We incorporate the psychological processes of sensitization and habituation into a model of

  5. Gene pyramiding enhances durable blast disease resistance in rice.

    Science.gov (United States)

    Fukuoka, Shuichi; Saka, Norikuni; Mizukami, Yuko; Koga, Hironori; Yamanouchi, Utako; Yoshioka, Yosuke; Hayashi, Nagao; Ebana, Kaworu; Mizobuchi, Ritsuko; Yano, Masahiro

    2015-01-14

    Effective control of blast, a devastating fungal disease of rice, would increase and stabilize worldwide food production. Resistance mediated by quantitative trait loci (QTLs), which usually have smaller individual effects than R-genes but confer broad-spectrum or non-race-specific resistance, is a promising alternative to less durable race-specific resistance for crop improvement, yet evidence that validates the impact of QTL combinations (pyramids) on the durability of plant disease resistance has been lacking. Here, we developed near-isogenic experimental lines representing all possible combinations of four QTL alleles from a durably resistant cultivar. These lines enabled us to evaluate the QTLs singly and in combination in a homogeneous genetic background. We present evidence that pyramiding QTL alleles, each controlling a different response to M. oryzae, confers strong, non-race-specific, environmentally stable resistance to blast disease. Our results suggest that this robust defence system provides durable resistance, thus avoiding an evolutionary "arms race" between a crop and its pathogen.

  6. Measuring Happiness: From Fluctuating Happiness to Authentic–Durable Happiness

    Science.gov (United States)

    Dambrun, Michaël; Ricard, Matthieu; Després, Gérard; Drelon, Emilie; Gibelin, Eva; Gibelin, Marion; Loubeyre, Mélanie; Py, Delphine; Delpy, Aurore; Garibbo, Céline; Bray, Elise; Lac, Gérard; Michaux, Odile

    2012-01-01

    On the basis of the theoretical distinction between self-centeredness and selflessness (Dambrun and Ricard, 2011), the main goal of this research was to develop two new scales assessing distinct dimensions of happiness. By trying to maximize pleasures and to avoid displeasures, we propose that a self-centered functioning induces a fluctuating happiness in which phases of pleasure and displeasure alternate repeatedly (i.e., Fluctuating Happiness). In contrast, a selfless psychological functioning postulates the existence of a state of durable plenitude that is less dependent upon circumstances but rather is related to a person’s inner resources and abilities to deal with whatever comes his way in life (i.e., Authentic–Durable Happiness). Using various samples (n = 735), we developed a 10-item Scale measuring Subjective Fluctuating Happiness (SFHS) and a 13-item scale assessing Subjective Authentic–Durable Happiness (SA–DHS). Results indicated high internal consistencies, satisfactory test–retest validities, and adequate convergent and discriminant validities with various constructs including a biological marker of stress (salivary cortisol). Consistent with our theoretical framework, while self-enhancement values were related only to fluctuating happiness, self-transcendence values were related only to authentic–durable happiness. Support for the distinction between contentment and inner-peace, two related markers of authentic happiness, also was found. PMID:22347202

  7. Initiative de gestion durable des ressources aquatiques | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    un groupe consultatif technique de l'Institut international du développement durable (IIDD), d'analyser certains de ces projets financés par le CRDI. On mesurera, au moyen de la méthodologie de cartographie des incidences mise au point par ...

  8. Durability Study of SOFCs Under Cycling Current Load Conditions

    DEFF Research Database (Denmark)

    Hagen, Anke; Hendriksen, Peter Vang; Frandsen, Henrik Lund

    2009-01-01

    In fuel cell applications, the cells must be able to withstand varying operating conditions. Anode supported solid oxide fuel cells were tested under cycling current load in order to determine the durability and possibly identify degradation mechanisms. At 750 °C and a cycling between zero and 0...

  9. Durable control of metastatic nasopharyngeal carcinoma with metronomic chemotherapy

    Directory of Open Access Journals (Sweden)

    Po-Hsiang Huang

    2017-03-01

    Full Text Available Metronomic chemotherapy has shown encouraging efficacy and low toxicity in various tumor types and is one of the best treatment options for heavily pretreated patients or patients with advanced age and/or poor performance status. We demonstrated a patient with metastatic nasopharyngeal carcinoma who experienced durable disease control under etoposide-based combination metronomic chemotherapy.

  10. Structural Properties and Mechanical Durability of Extruded Fish Feed

    DEFF Research Database (Denmark)

    Haubjerg, Anders Fjeldbo; Veje, Christian; Jørgensen, Bo Nørregaard

    2015-01-01

    This article investigates the possible correlation between mechanical properties of fish feed pellets and their mechanical durability. Mechanical properties were obtained by texture profile analysis (TPA) and stress relaxation test (SRT) of different types of fish feed. The results were correlate...

  11. 40 CFR 86.1820-01 - Durability group determination.

    Science.gov (United States)

    2010-07-01

    ...) Combustion cycle (e.g., two stroke, four stroke, Otto cycle, diesel cycle). (2) Engine type (e.g., piston... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED... compared to the engine displacement that are allowable within a durability group. The grouping statistic...

  12. Durability of wood/plastic composites made from Parthenium species

    Science.gov (United States)

    Poo Chow; Francis S. Nakayama; John A. Youngquist; James H. Muehl; Andrzej M. Krzysik

    2002-01-01

    Previous study indicated that the natural chemical constituents of the guayule plant (Parthenium argentatum) improved some durability properties of wood when it was treated with resin extracted from guayule. At present, there are about a dozen species of Parthenium growing in the North American continent. P. argentatum is the only species with harvestable amounts of...

  13. Enhancing durability of wood-based composites with nanotechnology

    Science.gov (United States)

    Carol Clausen

    2012-01-01

    Wood protection systems are needed for engineered composite products that are susceptible to moisture and biodeterioration. Protection systems using nano-materials are being developed to enhance the durability of wood-based composites through improved resistance to biodeterioration, reduced environmental impact from chemical leaching, and improved resistance to...

  14. The durability and mechanical strenght properties of bamboo in ...

    African Journals Online (AJOL)

    The durability and mechanical strenght properties of bamboo in reinforced concrete. GA Alade, FA Olutoge, AA Alade. Abstract. No Abstract. Journal of Applied Science, Engineering and Technology Vol. 4(2) 2004: 35-40. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  15. Durability studies on the high calcium flyash based GPC

    African Journals Online (AJOL)

    Geopolymer concrete is an environment friendly green concrete which is comparatively of lower carbon footprint. Most of the studies reported is about the development of low calcium flyash based GPC only and and that too mostly on achieving the compressive strength and not much on its durability related properties. In this ...

  16. Sustainability assessment of concrete structure durability under reinforcement corrosion

    DEFF Research Database (Denmark)

    Thybo, Anna Emilie A.; Michel, Alexander; Stang, Henrik

    In the present paper a parametric study is conducted based on an existing finite element based model. The influence of cover layer, reinforcement diameter and water-to-cement ratio is compared to a possible scatter in the results due to insufficient knowledge about the distribution of the corrosi...... and predict the durability of a given structure....

  17. Ancient analogues concerning stability and durability of cementitious wasteform

    International Nuclear Information System (INIS)

    Jiang, W.; Roy, D.M.

    1994-01-01

    The history of cementitious materials goes back to ancient times. The Greeks and Romans used calcined limestone and later developed pozzolanic cement by grinding together lime and volcanic ash called open-quotes pozzolanclose quotes which was first found near Port Pozzuoli, Italy. The ancient Chinese used lime-pozzolanic mixes to build the Great Wall. The ancient Egyptians used calcined impure gypsum to build the Great Pyramid of Cheops. The extraordinary stability and durability of these materials has impressed us, when so much dramatically damaged infrastructure restored by using modern portland cement now requires rebuilding. Stability and durability of cementitious materials have attracted intensive research interest and contractors' concerns, as does immobilization of radioactive and hazardous industrial waste in cementitious materials. Nuclear waste pollution of the environment and an acceptable solution for waste management and disposal constitute among the most important public concerns. The analogy of ancient cementitious materials to modern Portland cement could give us some clues to study their stability and durability. This present study examines selected results of studies of ancient building materials from France, Italy, China, and Egypt, combined with knowledge obtained from the behavior of modern portland cement to evaluate the potential for stability and durability of such materials in nuclear waste forms

  18. Utilization of Durability Criterion to Develop Automotive Components

    DEFF Research Database (Denmark)

    Ricardo, Luiz Carlos Hernandes

    2010-01-01

    Today the automotive companies must reduce the time to development of new products with improvement in performance, durability and low cost reductions where possible. To achieve this goal the carmakers need to improve the design criterion of car systems like body, chassis and suspension component...

  19. Durability Issues and Status of PBI-Based Fuel Cells

    DEFF Research Database (Denmark)

    Jakobsen, Mark Tonny Dalsgaard; Jensen, Jens Oluf; Cleemann, Lars Nilausen

    2016-01-01

    This chapter briefly reviews durability and stability issues with key materials and components for HT-PEMFCs, including the polymer membrane, the doping acid, the electrocatalyst, the catalyst support and bipolar plates. Degradation mechanisms and their dependence on fuel cell operating condition...

  20. Key Design Factors in Durable Instructional Technology Professional Development

    Science.gov (United States)

    Wells, John

    2007-01-01

    The capacity of any professional development effort to achieve durable change in teacher practice is affected by a host of design factors and their precise alignment with multiple delivery strategies. However, how successful professional development (PD) programs achieve an effective mix of these factors and strategies is not well understood. The…

  1. Adhesives for Achieving Durable Bonds with Acetylated Wood

    Directory of Open Access Journals (Sweden)

    Charles R. Frihart

    2017-12-01

    Full Text Available Acetylation of wood imparts moisture durability, decay resistance, and dimensional stability to wood; however, making durable adhesive bonds with acetylated wood can be more difficult than with unmodified wood. The usual explanation is that the acetylated surface has fewer hydroxyl groups, resulting in a harder-to-wet surface and in fewer hydrogen bonds between wood and adhesive. This concept was evaluated using four different adhesives (resorcinol–formaldehyde, emulsion polymer isocyanate, epoxy, and melamine–formaldehyde with unmodified wood, acetylated wood, and acetylated wood that had been planed. Strikingly, acetylation did not hinder adhesive bonds with a waterborne resorcinol–formaldehyde adhesive that bonded equally well to both unmodified and acetylated yellow poplar. An epoxy adhesive bonded better to the acetylated wood than to the unmodified wood, in contrast to an emulsion polymer isocyanate, which gave less durable bonds to acetylated than to unmodified wood. Planing of the acetylated wood surface prior to bonding reduced bond durability for the epoxy adhesive and increased the amount of surface hydroxyl groups, as measured using X-ray photoelectron spectroscopic analysis of the trifluoroacetic anhydride-treated wood. These experiments showed that wood modification is useful in understanding wood-adhesive interactions, in addition to determining how to develop adhesives for acetylated woods.

  2. Framework for a procedure for design for durability

    NARCIS (Netherlands)

    Siemes, A.J.M.

    1996-01-01

    The design for durability of structures and building components is in general based on implicit requirements with respect to the quality and dimensions of the composing building materials and components. These requirements are based on long term experience. This approach has disadvantages. It is

  3. Comparative durability of timber bridges in the USA

    Science.gov (United States)

    James P. Wacker; Brian K. Brashaw

    2017-01-01

    As engineers begin to utilize life-cycle-cost design approaches for timber bridges, there is a necessity for more reliable data about their durability and expected service life. This paper summarizes a comprehensive effort to assess the current condition of more than one hundred timber highway bridge superstructures throughout the United States. This national study was...

  4. Rock Art in Kurdistan Iran

    Directory of Open Access Journals (Sweden)

    Jamal Lahafian

    2013-12-01

    Full Text Available Kurdistan, with great potential and prehistoric resources, has numerous petroglyphs in different areas of the province. During the last 14 years of extensive field study, more than 30 sites of rock art have been identified and introduced by the author. In this article, we summarize these rock art areas in Iranian Kurdistan.

  5. Beach rock from Goa Coast

    Digital Repository Service at National Institute of Oceanography (India)

    Setty, M.G.A.P.; Wagle, B.G.

    Beach rock is a common rock type in many parts of the southern hemisphere and also some areas north of the equator. Its distribution particularly in the Indian Ocean islands and atolls and coasts of India is reviewed. The mineralogic and faunal...

  6. Rock strength under explosive loading

    International Nuclear Information System (INIS)

    Rimer, N.; Proffer, W.

    1993-01-01

    This presentation emphasizes the importance of a detailed description of the nonlinear deviatoric (strength) response of the surrounding rock in the numerical simulation of underground nuclear explosion phenomenology to the late times needed for test ban monitoring applications. We will show how numerical simulations which match ground motion measurements in volcanic tuffs and in granite use the strength values obtained from laboratory measurements on small core samples of these rocks but also require much lower strength values after the ground motion has interacted with the rock. The underlying physical mechanisms for the implied strength reduction are not yet well understood, and in fact may depend on the particular rock type. However, constitutive models for shock damage and/or effective stress have been used successfully at S-Cubed in both the Geophysics Program (primarily for DARPA) and the Containment Support Program (for DNA) to simulate late time ground motions measured at NTS in many different rock types

  7. Rock suitability classification RSC 2012

    Energy Technology Data Exchange (ETDEWEB)

    McEwen, T. (ed.) [McEwen Consulting, Leicester (United Kingdom); Kapyaho, A. [Geological Survey of Finland, Espoo (Finland); Hella, P. [Saanio and Riekkola, Helsinki (Finland); Aro, S.; Kosunen, P.; Mattila, J.; Pere, T.

    2012-12-15

    This report presents Posiva's Rock Suitability Classification (RSC) system, developed for locating suitable rock volumes for repository design and construction. The RSC system comprises both the revised rock suitability criteria and the procedure for the suitability classification during the construction of the repository. The aim of the classification is to avoid such features of the host rock that may be detrimental to the favourable conditions within the repository, either initially or in the long term. This report also discusses the implications of applying the RSC system for the fulfilment of the regulatory requirements concerning the host rock as a natural barrier and the site's overall suitability for hosting a final repository of spent nuclear fuel.

  8. ROCK inhibitors in ocular disease

    Directory of Open Access Journals (Sweden)

    Eva Halasz

    2016-12-01

    Full Text Available Rho kinases (ROCKs have a crucial role in actin-cytoskeletal reorganization and thus are involved in broad aspects of cell motility, from smooth muscle contraction to neurite outgrowth. The first marketed ROCK inhibitor, called fasudil, has been used safely for treatment of cerebral vasospasm since 1995 in Japan. During the succeeding decades ROCK inhibitors have been applied in many pathological conditions from central nervous system disorders to cardiovascular disease as potential therapeutic agents or experimental tools to help understand the underlying (pathomechanisms. In 2014, a fasudil derivate named ripasudil was accepted for clinical use in glaucoma and ocular hypertension. Since ROCK kinases are widely expressed in ocular tissues, they have been implicated in the pathology of many ocular conditions such as corneal dysfunction, glaucoma, cataract, diabetic retinopathy, age-related macular degeneration, and retinal detachment. This paper aims to provide an overview of the most recent status/application of ROCK inhibitors in the field of eye disease.

  9. Multi-factor Effects on the Durability of Recycle Aggregate Concrete

    Science.gov (United States)

    Ma, Huan; Cui, Yu-Li; Zhu, Wen-Yu; Xie, Xian-Jie

    2016-05-01

    Recycled Aggregate Concrete (RAC) was prepared with different recycled aggregate replacement ratio, 0, 30%, 70% and 100% respectively. The performances of RAC were examined by the freeze-thaw cycle, carbonization and sulfate attack to assess the durability. Results show that test sequence has different effects on the durability of RAC; the durability is poorer when carbonation experiment was carried out firstly, and then other experiment was carried out again; the durability is better when recycled aggregate replacement ratio is 70%.

  10. Durability of fibre reinforced concrete structures exposed to combined mechanical and environmental load

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place; Hansen, Kurt Kielsgaard

    1999-01-01

    The main conclusions from a research project on durability of cracked fibre reinforced concrete structures exposed to chlorides, water or freeze-thaw are presented. The effect of fibres and cracks on the durability of concrete is studied.......The main conclusions from a research project on durability of cracked fibre reinforced concrete structures exposed to chlorides, water or freeze-thaw are presented. The effect of fibres and cracks on the durability of concrete is studied....

  11. Soil organic carbon and nitrogen accumulation on coal mine spoils reclaimed with maritime pine (Pinus pinaster Aiton) in Agacli-Istanbul.

    Science.gov (United States)

    Sever, Hakan; Makineci, Ender

    2009-08-01

    Mining operations on open coal mines in Agacli-Istanbul have resulted in the destruction of vast amounts of land. To rehabilitate these degraded lands, plantations on this area began in 1988. Twelve tree species were planted, however, the most planted tree species was maritime pine (Pinus pinaster Aiton). This study performed on 14 sample plots randomly selected in maritime pine plantations on coal mine soil/spoils in 2005. Soil samples were taken from eight different soil layers (0-1, 1-3, 3-5, 5-10, 10-20, 20-30, 30-40 and 40-50 cm) into the soil profile. On soil samples; fine soil fraction (carbon (C(org)) and total nitrogen (N(t)) contents were investigated, and results were compared statistically among soil layers. As a result, 17 years after plantations, total forest floor accumulation determined as 17,973.20 kg ha(-1). Total nitrogen and organic matter amounts of forest floor were 113.90 and 14,640.92 kg ha(-1) respectively. Among soil layers, the highest levels of organic carbon (1.77%) and total nitrogen (0.096%) and the lowest pH value (pH 5.38) were found in 0-1 cm soil layer, and the variation differs significantly among soil layers. Both organic carbon and total nitrogen content decreased, pH values increased from 0-1 to 5-10 cm layer. In conclusion, according to results obtained maritime pine plantations on coal mine spoils; slow accumulation and decomposition of forest floor undergo simultaneously. Depending on these changes organic carbon and total nitrogen contents increased in upper layer of soil/spoil.

  12. Durability of resistance against fungal, bacterial and viral pathogens; present situation

    NARCIS (Netherlands)

    Parlevliet, J.E.

    2002-01-01

    In evolutionary sense no resistance lasts forever. The durability of a resistance can be seen as a quantitative trait; resistances may range from not durable at all (ephemeral, or transient) to highly durable. Ephemeral resistance occurs against fungi and bacteria with a narrow host range,

  13. Investigation on natural durability and sorption properties of Italian Chestnut (Castanea sativa Mill.) from coppice stands

    NARCIS (Netherlands)

    Militz, H.; Busetto, D.; Hapla, F.

    2003-01-01

    Castanea sativa Mill. from coppice stands in Italy were evaluated. Fungi trials with different white rot, brown rot and soft rot fungi showed, that the heartwood of chestnut can be classified following EN 350 in durability class 2 as ¿durable¿. However, the durability within the tested material

  14. Production with Storable and Durable Inputs: Nonparametric Analysis of Intertemporal Efficiency

    NARCIS (Netherlands)

    L. Cherchye (Laurens); B. de Rock (Bram); P.J. Kerstens (Pieter Jan)

    2016-01-01

    textabstractWe propose a nonparametric methodology for intertemporal production analysis that accounts for durable as well as storable inputs. Durable inputs contribute to the production outputs in multiple consecutive periods. Storable inputs are non-durable and can be stored in inventories for use

  15. Design of concrete structures for durability. Example: Chloride penetration in the lining of a bored tunnel

    NARCIS (Netherlands)

    Siemes, A.J.M.

    1998-01-01

    The present design method for durability of concrete is based on a set of rules that give no objective in-sight in the service life to expect from the concrete structure. An objective comparison between different durability measures is therefor not possible. Especially if the lack of durability can

  16. Uranium series, volcanic rocks

    Science.gov (United States)

    Vazquez, Jorge A.

    2014-01-01

    Application of U-series dating to volcanic rocks provides unique and valuable information about the absolute timing of crystallization and differentiation of magmas prior to eruption. The 238U–230Th and 230Th-226Ra methods are the most commonly employed for dating the crystallization of mafic to silicic magmas that erupt at volcanoes. Dates derived from the U–Th and Ra–Th methods reflect crystallization because diffusion of these elements at magmatic temperatures is sluggish (Cherniak 2010) and diffusive re-equilibration is insignificant over the timescales (less than or equal to 10^5 years) typically associated with pre-eruptive storage of nearly all magma compositions (Cooper and Reid 2008). Other dating methods based on elements that diffuse rapidly at magmatic temperatures, such as the 40Ar/39Ar and (U–Th)/He methods, yield dates for the cooling of magma at the time of eruption. Disequilibrium of some short-lived daughters of the uranium series such as 210Po may be fractionated by saturation of a volatile phase and can be employed to date magmatic gas loss that is synchronous with volcanic eruption (e.g., Rubin et al. 1994).

  17. They will rock you!

    CERN Multimedia

    Anaïs Schaeffer

    2013-01-01

    On 30 September, CERN will be the venue for one of the most prestigious events of the year: the concert for the Bosons&More event, the Organization’s celebration of the remarkable performance of the LHC and all its technical systems, as well as the recent fundamental discoveries. Topping the bill will be the Orchestre de la Suisse Romande, the CERN Choir, the Zürcher Sing-Akademie and the Alan Parsons Live Project rock group, who have joined forces to create an unforgettable evening’s entertainment.   The Orchestre de la Suisse Romande, directed by Maestro Neeme Järvi, artistic and musical director of the OSR. (Image: Grégory Maillot). >>> From the Orchestre de la Suisse Romande… Henk Swinnen, General Manager of the Orchestre de la Suisse Romande (OSR), answers some questions for the CERN Bulletin, just a few days before the event. How did this project come about? When CERN invited us to take part in the B...

  18. Dynamics of rock varnish formation

    Energy Technology Data Exchange (ETDEWEB)

    Raymond, R. Jr.; Reneau, S.L.; Guthrie, G.D. Jr.; Bish, D.L.; Harrington, C.D.

    1991-01-01

    Our studies of rock varnish from the southwestern United States suggest that the Mn-phase in rock varnish has neither the chemistry nor the crystal structure of birnessite. Rather, the Mn-rich phase is non-crystalline and contains Ba, Ca, Fe, Al, and P. Unknowns concerning the formation of this non-crystalline Mn phase must be resolved before researchers are able to define chemical parameters of rock varnish formation based upon conditions of formation of the Mn phase. 6 refs., 9 figs.

  19. Space Weathering of Lunar Rocks

    Science.gov (United States)

    Noble, S. K.; Keller, L. P.; Christoffersen, R.; Rahman, Z.

    2012-01-01

    All materials exposed at the lunar surface undergo space weathering processes. On the Moon, boulders make up only a small percentage of the exposed surface, and areas where such rocks are exposed, like central peaks, are often among the least space weathered regions identified from remote sensing data. Yet space weathered surfaces (patina) are relatively common on returned rock samples, some of which directly sample the surface of larger boulders. Because, as witness plates to lunar space weathering, rocks and boulders experience longer exposure times compared to lunar soil grains, they allow us to develop a deeper perspective on the relative importance of various weathering processes as a function of time.

  20. Multiverso: Rock'n'Astronomy

    Science.gov (United States)

    Caballero, J. A.

    2012-05-01

    In the last few years, there have been several projects involving astronomy and classical music. But have a rock band ever appeared at a science conference or an astronomer at a rock concert? We present a project, Multiverso, in which we mix rock and astronomy, together with poetry and video art (Caballero, 2010). The project started in late 2009 and has already reached tens of thousands people in Spain through the release of an album, several concert-talks, television, radio, newspapers and the internet.

  1. Mineral Detector for Igneous Rocks

    Science.gov (United States)

    Ishikawa, S. T.; Hart, S. D.; Gulick, V. C.

    2010-12-01

    We present a Raman spectral analysis tool that uses machine learning algorithms to classify pure minerals in igneous rocks. Experiments show greater than 90% accuracy classifying a test set of pure minerals against a database of similar reference minerals using an artificial neural network. Efforts are currently underway to improve this tool for use as a mineral detector in rock samples, an important milestone toward autonomously classifying rocks based on spectral, and previous imaging work. Although pure mineral classification has been widely successful, applying the same methods to rocks is difficult because the spectra may represent a combination of multiple, and often competing, mineral signatures. In such cases some minerals may appear with more intensity than others resulting in masking of weaker minerals. Furthermore, with our particular spectrometer (852 nm excitation, ~50 micron spot size), minerals such as potassium feldspar fluoresce, both obscuring its characteristic Raman features and suppressing those of weaker minerals. For example, plagioclase and quartz, two key minerals for determining the composition of igneous rocks, are often hidden by minerals such as potassium feldspar and pyroxene, and are consequently underrepresented in the spectral analysis. These technicalities tend to skew the perceived composition of a rock from its actual composition. Despite these obstacles, an experiment involving a training set of 26 minerals (plagioclase, potassium feldspar, pyroxene, olivine, quartz) and a test set of 57 igneous rocks (basalt, gabbro, andesite, diorite, dacite, granodiorite, rhyolite, granite) shows that generalizations derived from their spectral data are consistent with expected trends: as rock composition goes from felsic to mafic there is a marked increase in the detection of minerals such as plagioclase and pyroxene along with a decrease in the detection of minerals such as quartz and potassium feldspar. The results suggest that phaneritic

  2. Fault rocks and uranium mineralization

    International Nuclear Information System (INIS)

    Tong Hangshou.

    1991-01-01

    The types of fault rocks, microstructural characteristics of fault tectonite and their relationship with uranium mineralization in the uranium-productive granite area are discussed. According to the synthetic analysis on nature of stress, extent of crack and microstructural characteristics of fault rocks, they can be classified into five groups and sixteen subgroups. The author especially emphasizes the control of cataclasite group and fault breccia group over uranium mineralization in the uranium-productive granite area. It is considered that more effective study should be made on the macrostructure and microstructure of fault rocks. It is of an important practical significance in uranium exploration

  3. Evolutionary model of an anonymous consumer durable market

    Science.gov (United States)

    Kaldasch, Joachim

    2011-07-01

    An analytic model is presented that considers the evolution of a market of durable goods. The model suggests that after introduction goods spread always according to a Bass diffusion. However, this phase will be followed by a diffusion process for durable consumer goods governed by a variation-selection-reproduction mechanism and the growth dynamics can be described by a replicator equation. The theory suggests that products play the role of species in biological evolutionary models. It implies that the evolution of man-made products can be arranged into an evolutionary tree. The model suggests that each product can be characterized by its product fitness. The fitness space contains elements of both sites of the market, supply and demand. The unit sales of products with a higher product fitness compared to the mean fitness increase. Durables with a constant fitness advantage replace other goods according to a logistic law. The model predicts in particular that the mean price exhibits an exponential decrease over a long time period for durable goods. The evolutionary diffusion process is directly related to this price decline and is governed by Gompertz equation. Therefore it is denoted as Gompertz diffusion. Describing the aggregate sales as the sum of first, multiple and replacement purchase the product life cycle can be derived. Replacement purchase causes periodic variations of the sales determined by the finite lifetime of the good (Juglar cycles). The model suggests that both, Bass- and Gompertz diffusion may contribute to the product life cycle of a consumer durable. The theory contains the standard equilibrium view of a market as a special case. It depends on the time scale, whether an equilibrium or evolutionary description is more appropriate. The evolutionary framework is used to derive also the size, growth rate and price distribution of manufacturing business units. It predicts that the size distribution of the business units (products) is lognormal

  4. An experimental study on dredge spoil of estuarine sediments in the bay of seine (France): A morphosedimentary assessment

    Science.gov (United States)

    Marmin, Stella; Lesueur, Patrick; Dauvin, Jean Claude; Samson, Sandrine; Tournier, Patrice; Gallicher Lavanne, Albert; Dubrulle-Brunaud, Carole; Thouroude, Coralie

    2016-03-01

    Studies on the consequences of dredging on estuarine morphology and its sedimentary dynamics are common, but the impacts of dumping dredge spoil in coastal open settings are rarely found in scientific literature. An experimental study was conducted over the period 2012-2013 to monitor the physical impacts of dredged material dumped at two adjacent sites (one million cubic metres at each) on the inner shelf of the Bay of Seine in France (eastern part of the English Channel, La Manche). As recently reinforced in the EU Marine Strategy Framework Directive (MSFD), knowledge on the location and intensity of human impacts (e.g. on marine ecosystems) is critical for effective marine management and conservation. So, two methods of disposition were tested to evaluate the impacts of dumping on the environment and thus propose recommendations for future dumping. The strategy is based on a Before-After-Control-Impact (BACI) approach, in which the spatio-temporal variability was studied by analysing the morphological and sedimentological characteristics over a period of 28 months, from November 2011 to April 2014, also including recovery of the seafloor after cessation of the dumping activities. The first experimental dumping operation (MASED) was carried out regularly for 8 months at a single point and generating a conical deposit of 5 m in height, while the second dumping (MABIO) lasted for 12 months involving four steps in the dumping process. In the second case, a wider area was covered, leading to the formation of a smaller deposit of 2 m in height. The dumped deposits consisted of muddy fine sand, whereas the inner shelf seafloor in this area is covered with fine to medium sand. As a result, muddy fine sand accumulated at or near the two dumping sites, with a maximum mud (i.e. particles4 Φ) content of 50% compared tostudy area. For the latter, a spreading of fine particles was observed extending from the conical deposit towards the south west. To favour long

  5. Characteristics of N-Acylhomoserine Lactones Produced by Hafnia alvei H4 Isolated from Spoiled Instant Sea Cucumber

    Directory of Open Access Journals (Sweden)

    Hong-Man Hou

    2017-04-01

    Full Text Available This study aimed to identify N-acylhomoserine lactone (AHL produced by Hafnia alvei H4, which was isolated from spoiled instant sea cucumber, and to investigate the effect of AHLs on biofilm formation. Two biosensor strains, Chromobacterium violaceum CV026 and Agrobacterium tumefaciens KYC55, were used to detect the quorum sensing (QS activity of H. alvei H4 and to confirm the existence of AHL-mediated QS system. Thin layer chromatography (TLC and high resolution triple quadrupole liquid chromatography/mass spectrometry (LC/MS analysis of the AHLs extracted from the culture supernatant of H. alvei H4 revealed the existence of at least three AHLs: N-hexanoyl-l-homoserine lactone (C6-HSL, N-(3-oxo-octanoyl-l-homoserine lactone (3-oxo-C8-HSL, and N-butyryl-l-homoserine lactone (C4-HSL. This is the first report of the production of C4-HSL by H. alvei. In order to determine the relationship between the production of AHL by H. alvei H4 and bacterial growth, the β-galactosidase assay was employed to monitor AHL activity during a 48-h growth phase. AHLs production reached a maximum level of 134.6 Miller unites at late log phase (after 18 h and then decreased to a stable level of about 100 Miller unites. AHL production and bacterial growth displayed a similar trend, suggesting that growth of H. alvei H4 might be regulated by QS. The effect of AHLs on biofilm formation of H. alvei H4 was investigated by adding exogenous AHLs (C4-HSL, C6-HSL and 3-oxo-C8-HSL to H. alvei H4 culture. Biofilm formation was significantly promoted (p < 0.05 by 5 and 10 µM C6-HSL, inhibited (p < 0.05 by C4-HSL (5 and 10 µM and 5 µM 3-oxo-C8-HSL, suggesting that QS may have a regulatory role in the biofilm formation of H. alvei H4.

  6. The Chronology of Rock Art

    Indian Academy of Sciences (India)

    Such phases are tentatively ascribed to different archaeological cultures on the basis of the contextual availability, stylistic similarities and so on. Ethnographic analogies are also attempted in the dating of rock art .

  7. Rock Art of Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Majeed Khan

    2013-12-01

    Full Text Available It is not only oil in which Saudi Arabia is rich, but it is also among the four richest rock art regions of the world. Hundreds and thousands of petroglyphs, painted rock art, and ancient Arabian inscriptions sites are located all over the country, representing various cultural phases, from the Neolithic until the recent past. One can see the naturalistic, schematic, abstract, mythical, and mystical images representing ancient ideology, thoughts about the metaphysical world, religious entity, economy, environment, human activities, and variety of animal types, according to particular climatic and environmental conditions. The rock art of Saudi Arabia is the mirror of its rich cultural heritage of so-called Bedouin or desert dwellers that surprises the world with its 4000 archaeological and more than 1500 rock art sites.

  8. Chemical methods of rock analysis

    National Research Council Canada - National Science Library

    Jeffery, P. G; Hutchison, D

    1981-01-01

    A practical guide to the methods in general use for the complete analysis of silicate rock material and for the determination of all those elements present in major, minor or trace amounts in silicate...

  9. Cement mixtures containing copper tailings as an additive: durability properties

    Directory of Open Access Journals (Sweden)

    Obinna Onuaguluchi

    2012-12-01

    Full Text Available The effects of copper tailings as an additive, on some durability properties of cement mixtures were investigated. In each mixture, copper tailings addition levels by mass were 0%, 5% and 10%. Compared to the control samples, copper tailings blended pastes showed superior performance against autoclave expansion while insignificant decreases in sulfate resistance of mortars were observed. Copper tailings increased the water absorption and total permeable voids of concretes slightly. However, the compressive and flexural strengths of blended concretes were higher than those of the control samples. Similarly, improved resistance to acid attack and chloride penetration as the copper tailings content of concretes increased were also observed. Results further showed that the ASTM C 1202 rapid chloride permeability test may not be a valid indicator of chloride migration in mixtures containing conductive copper tailings. These results suggest that copper tailings can potentially enhance the durability properties of cement based materials.

  10. Durability of Solid Oxide Electrolysis Cells for Syngas Production

    DEFF Research Database (Denmark)

    Sun, Xiufu; Chen, Ming; Liu, Yi-Lin

    2013-01-01

    Performance and durability of Ni-YSZ supported solid oxide electrolysis cells (SOECs) for co-electrolysis of H2O and CO2 at high current density was investigated. The cells consist of a Ni-YSZ support, a Ni-YSZ electrode, a YSZ electrolyte, and an LSM-YSZ electrode. The durability was examined...... at 800°C and electrolysis current densities of −1 or −1.5 A/cm2 with 60% reactant (H2O + CO2) utilization. The cell voltage degradation showed a strong dependence on the electrolysis current density. Electrochemical characterization of the cells showed that the degradation was mainly related to the LSM...

  11. Moisture Durability with Vapor-Permeable Insulating Sheathing

    Energy Technology Data Exchange (ETDEWEB)

    Lepage, R. [Building Science Corporation, Somerville, MA (United States); Lstiburek, J. [Building Science Corporation, Somerville, MA (United States)

    2013-09-01

    Exterior sheathing insulation is an effective strategy in increasing the overall R-value of wall assemblies; other benefits include decreasing the effects of thermal bridging and increasing the moisture durability of the built assembly. Vapor-permeable exterior insulation, such as mineral board or expanded polystyrene foam, are one such product that may be used to achieve these benefits. However,uncertainty exists on the effects of inward driven moisture and the interaction of increased sheathing temperatures on the moisture durability of the edifice. To address these concerns, Building Science Corporation (BSC) conducted a series of hygrothermal models for cities representing a range of different climate zones. This report describes the research project, key research questions, and theprocedures utilized to analyse the problems.

  12. Moisture Durability with Vapor-Permeable Insulating Sheathing

    Energy Technology Data Exchange (ETDEWEB)

    Lepage, R. [Building Science Corporation, Somerville, MA (United States); Lstiburek, J. [Building Science Corporation, Somerville, MA (United States)

    2013-09-01

    Exterior sheathing insulation is an effective strategy in increasing the overall R-value of wall assemblies; other benefits include decreasing the effects of thermal bridging and increasing the moisture durability of the built assembly. Vapor-permeable exterior insulation, such as mineral board or expanded polystyrene foam, are one such product that may be used to achieve these benefits. However, uncertainty exists on the effects of inward driven moisture and the interaction of increased sheathing temperatures on the moisture durability of the edifice. To address these concerns, Building Science Corporation (BSC) conducted a series of hygrothermal models for cities representing a range of different climate zones. This report describes the research project, key research questions, and the procedures utilized to analyse the problems.

  13. Engine cyclic durability by analysis and material testing

    Science.gov (United States)

    Kaufman, A.; Halford, G. R.

    1984-01-01

    The problem of calculating turbine engine component durability is addressed. Nonlinear, finite-element structural analyses, cyclic constitutive behavior models, and an advanced creep-fatigue life prediction method called strainrange partitioning were assessed for their applicability to the solution of durability problems in hot-section components of gas turbine engines. Three different component or subcomponent geometries are examined: a stress concentration in a turbine disk; a louver lip of a half-scale combustor linear; and a squealer tip of a first-stage high-pressure turbine blade. Cyclic structural analyses were performed for all three problems. The computed strain-temperature histories at the critical locations of the combustor linear and turbine blade components were imposed on smooth specimens in uniaxial, strain-controlled, thermomechanical fatigue tests of evaluate the structural and life analysis methods.

  14. Electrical Switchability and Dry-Wash Durability of Conductive Textiles.

    Science.gov (United States)

    Wu, Bangting; Zhang, Bowu; Wu, Jingxia; Wang, Ziqiang; Ma, Hongjuan; Yu, Ming; Li, Linfan; Li, Jingye

    2015-06-12

    There is growing interest in the area of conductive textiles in the scientific and industrial community. Herein, we successfully prepared a conductive textile via covalently grafting polyaniline (PANI) onto cotton by a multi-step treatment process. The conductivity of the resultant fabric could be tuned by immersing in water having different pH values. The conductive and insulating properties of the textile could be conveniently switched by alternately immersing in acidic and alkaline bath solutions. Most importantly, the resultant conductive fabrics were able to withstand 40 simulated dry-wash cycles, with almost no decay in the electrical conductivity, indicating their excellent dry-wash durability. The present strategy for fabricating conductive fabrics with excellent switchability of electrical properties and dry-wash durability is expected to provide inspiration for the production of multifunctional conductive textiles for use in hash or sensitive conditions.

  15. Durable Catalysts for High Temperature Proton Exchange Membrane Fuel Cells

    DEFF Research Database (Denmark)

    significant attention in recent years because of its potential advantages such as high CO tolerance, easy cooling, better heat utilization and possible integration with fuel processing units. However, the high temperature obviously aggravates the carbon corrosion and catalyst degradation. Based on thermally......Durability of proton exchange membrane fuel cells (PEMFCs) is recognized as one of the most important issues to be addressed before the commercialization. The failure mechanisms are not well understood, however, degradation of carbon supported noble metal catalysts is identified as a major failure...... corrosion, in turn, triggers the agglomeration of platinum particles resulting in reduction of the active surface area and catalytic activity. This is a major mechanism of the catalyst degradation and a key challenge to the PEMFC long-term durability. High temperature PEMFC, on the other hand, has attached...

  16. Quality differentiation of durable goods in secondary markets

    Directory of Open Access Journals (Sweden)

    Richard Saito

    2003-06-01

    Full Text Available This paper presents a framework to study how changes in exogenous parameters, such as quality levels of new and used durables, affect the composition of durable good stocks. Our model extends the previous literature by including the endogeneity of prices and qualities. Our results could be applied to evaluate policies for controlling the externality level associated with the use and quality of durable goods in the long-term. We studied the characterization of the demand under a special situation: the consumer can choose the operation and/or maintenance level in the period the durable goods are new, which determines the quality levels for the subsequent periods. Comparative statics is performed to analyze the effects of exogenous variable change on the composition of durable stocks, and thus its impact on the externality level associated with each quality level. Contrary to most expectations, we provide an example in which the regulator imposes stricter quality standards for new durables to decrease negative externality associated with the use of durables. In this example, the comparative static results show that policies focusing only on new durable externality control may turn out to increase total externality, since stocks of older vintages may increase.Este trabalho apresenta uma estrutura para analisar as mudanças de parâmetros exógenos, tais como níveis de qualidade de bens duráveis novos e usados sobre a composição de estoques de bens duráveis. O modelo amplia a literatura anterior ao incluir a endogeneidade de preço e qualidade. Os resultados podem ser aplicados para avaliar políticas destinadas a controlar o nível de externalidade associado ao uso e à qualidade de bens duráveis a longo prazo. Para analisar o impacto desses programas regulamentares, é importante estudar as mudanças associadas na composição de estoques de bens duráveis. O artigo avalia a caracterização da demanda sob uma situação especial: o

  17. Electrical Switchability and Dry-Wash Durability of Conductive Textiles

    Science.gov (United States)

    Wu, Bangting; Zhang, Bowu; Wu, Jingxia; Wang, Ziqiang; Ma, Hongjuan; Yu, Ming; Li, Linfan; Li, Jingye

    2015-06-01

    There is growing interest in the area of conductive textiles in the scientific and industrial community. Herein, we successfully prepared a conductive textile via covalently grafting polyaniline (PANI) onto cotton by a multi-step treatment process. The conductivity of the resultant fabric could be tuned by immersing in water having different pH values. The conductive and insulating properties of the textile could be conveniently switched by alternately immersing in acidic and alkaline bath solutions. Most importantly, the resultant conductive fabrics were able to withstand 40 simulated dry-wash cycles, with almost no decay in the electrical conductivity, indicating their excellent dry-wash durability. The present strategy for fabricating conductive fabrics with excellent switchability of electrical properties and dry-wash durability is expected to provide inspiration for the production of multifunctional conductive textiles for use in hash or sensitive conditions.

  18. Possibilities for production of medicinal aromatic plants on the spoil bank of the Pljevlja coal mine. Mogucnost gajenja ljekovitog i aromaticnog bilja na jalovistu rudnika uglja - Pljevlja

    Energy Technology Data Exchange (ETDEWEB)

    Memic, M.; Bajovic, L. (Rudnik Uglja Pljevlja (Yugoslavia))

    1990-01-01

    Presents results obtained from experimental recultivation of the Potrlica surface coal mine spoil bank (810 m elevation, continental climate) during 1986-1990. Two experimental fields - Potrlica-I (600 m[sup 2]) and Potrlica-II (300 m[sup 2]) - were prepared by spreading a 10-20 cm thick layer of low-quality soil over the marly waste of the spoil bank. Soil composition was: 2.10% and 74% Ca, 4.5% and 0.70% humus, l3.5% and 5.5% P[sub 2]O[sub 5] and 23.0% and 6.0% K[sub 2]O in Potrlica-I and II respectively. Soil pH values were 7.2 and 7.60; 500 kg/ha NPK (15:15:15) were spread. Seventeen species of aromatic and medicinal plants were grown. After four years the plants were classified into 3 groups (thriving, satisfactory and non-thriving). It was found that the following plants can yield satisfactory crops and profits: valeriana officinalis, hyssopus officinalis, artemis dracunculus, cynaris scolimus, foenculum vulgare and malva silvestris. Unsatisfactory results were obtained with melisa officinalis, coriandrum sativum, pimpinela anisum and angelica archangelica. Experiments will be continued.

  19. Restoration Practices Used on Post Mining Sites and Industrial Deposits in the Czech Republic with an Example of Natural Restoration of Granodiorite Quarries and Spoil Heaps

    Directory of Open Access Journals (Sweden)

    Chuman Tomáš

    2015-11-01

    Full Text Available Mining of minerals that have significant impact on landscape and landscape functions affects 1% of the land surface worldwide. In the Czech Republic the extent of mining sites is estimated to be more than 800 km2 and according to the state legislation the land affected by mining should be reclaimed. There are several approaches to land restoration, which are shortly reviewed in this article, from pure technical approach to one adopting natural processes. The review shows increasing appeal of scientist and conservationist to use natural processes e.g. natural or directed succession as an alternative method of post-mining sites or industrial deposits restoration due to growing evidence of conservational value of such sites in human dominated landscapes. The natural processes used for land restoration are often argued to be slow therefore the rate of spontaneous vegetation succession was assessed in stone quarries and on spoil heaps using a sequence of panchromatic aerial images. The results showed that natural processes act fast and vegetation can reach 100% cover within 10-15 years in granodiorite quarries and on spoil heaps.

  20. Physicochemical characterization of pulverized phyllite rocks to geopolymer resin synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Melo, L.G.A. [Instituto Militar de Enegenharia (IME), Rio de Janeiro, RJ (Brazil); Pires, E.F.C. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil); Pereira, R.A.; Silva, F.J. [Instituto Federal de Educacao, Ciencia e Tecnologia do Rio de Raneiro (IFRJ), RJ (Brazil)

    2016-07-01

    Full text: Geopolymeric materials have common properties considered unique, such as: early-high compressive strength, durability, high chemical resistance to acids and sulfates attacks, ability to immobilize toxic and radioactive compounds, low porosity, low permeability, and resistance to high temperatures. Together with its environmental benefits, such as low energy consumption and low carbon dioxide emissions during production, these inorganic polymers are strategic materials for sustainable development and a good alternative to Portland cement. The main objective for introducing alternative materials is to lower the associated costs of its industrial process. Thus, the use of phyllite as the geopolymer precursor, is encouraged by its abundance, low cost, and the fact that it already is applied to the ceramic industries as kaolin substitute. This paper presents a physical characterization using TEM, SEM, XRD and XRF techniques of two pulverized phyllite rocks used as geopolymer precursors for refractory applications. It was found that both phyllite rocks studied have a high quartz content of approximately 50% that can be explored as 'filler' function in the microstructure, which stabilizes residual tensions after curing. Kaolinite and muscovite minerals are present up to 40% and are responsible for the high strengths in the geopolymer resins, as determined by compressive strength tests. (author)

  1. Deformation of the rock pillar caused by bed operation using the room and pillar system

    Science.gov (United States)

    Grzebyk, Wiesław; Stolecki, Lech

    2017-11-01

    The copper ore deposit of the Legnica-Głogów Copper Mining District a one-deck bed formed from the contact of weak sandstone rocks, and solid, durable dolomite rocks, separated by a layer of copper slate. The bed operation is carried out using the room and pillar system. The course of deformation in such bed operation systems is determined by the mutual interaction of particular elements of the geo-mechanical system which include: the roof slab, the pillars and the excavation bed. Due to the possibility of human intervention, structural pillars - whose strength properties can be determined by the appropriate selection of their dimensions and shape - play a particular role in this system. The optimization of the properties of these pillars is mainly based on the results of laboratory tests of rock samples in the strength test machine and on the basis of visual observations of their behavior in situ. The article presents the experimental results carried out under pit conditions in order to determine the rock pillar reaction. Suitable observations were made using the so-called volumetric method. The obtained results were discussed in relation to the results of strength tests on rock samples, indicating the limited similarity to the deformation characteristics.

  2. A prediction model for uniaxial compressive strength of deteriorated pyroclastic rocks due to freeze-thaw cycle

    Science.gov (United States)

    İnce, İsmail; Fener, Mustafa

    2016-08-01

    Either directly or indirectly, building stone is exposed to diverse atmospheric interactions depending on the seasonal conditions. Due to those interactions, objects of historic and cultural heritage, as well as modern buildings, partially or completely deteriorate. Among processes involved in rock deterioration, the freeze-thaw (F-T) cycle is one of the most important. Even though pyroclastic rocks have been used as building stone worldwide due to their easy workability, they are the building stone most affected by the F-T cycle. A historical region in Central Anatolia, Turkey, Cappadoia encompasses exceptional natural wonders characterized by fairy chimneys and unique historical and cultural heritage. Human-created caves, places of worship and houses have been dug into the pyroclastic rocks, which have in turn been used in architectural construction as building stone. Using 10 pyroclastic rock samples collected from Cappadocia, we determined the rock's index-mechanical properties to develop a statistical model for estimating percentage loss of uniaxial compressive strength a critical parameter of F-T cycle's important value. We used dry density (ρd), ultrasonic velocity (Vp), point load strengths (IS(50)), and slake-durability test indexes (Id4) values of unweathered rocks in our model, which is highly reliable (R2 = 0.84) for predetermination of percentage loss of uniaxial compressive strengths of pyroclastic rocks without requiring any F-T tests.

  3. Energy and durable development: the place of the renewable energies

    International Nuclear Information System (INIS)

    2001-01-01

    The 29 may 2000, took place at the UNESCO, a colloquium on the place of the renewable energies facing the economic development. This document presents the opening presentation of A. Antolini and L. Jospin and the colloquium papers and debates in the following four domains: the energy challenges of the durable development, the renewable energies sources facing the european directive, the thermal renewable energies (solar, geothermics and biomass) and the greenhouse effect, the world market of the renewable energies. (A.L.B.)

  4. Product development capability and marketing strategy for new durable products

    OpenAIRE

    Banerjee, Sumitro; Soberman, David A.

    2013-01-01

    Our objective is to understand how a firm’s product development capability (PDC) affects the launch strategy for a durable product that is sequentially improved over time in a market where consumers have heterogeneous valuations for quality. We show that the launch strategy of firms is affected by the degree to which consumers think ahead. However, only the strategy of firms with high PDC is affected by the observability of quality. When consumers are myopic and quality is observable, both hi...

  5. Des effets durables : Asie | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    6 juin 2014 ... Le Projet hippocampe devient un important protagoniste de la conservation de la faune marine. En savoir plus. L'Initiative pour les micronutriments : des solutions durables à la faim inapparente · L'information améliore les conditions de vie dans les Philippines · De l'eau potable dans les foyers grâce à un ...

  6. Durable zinc ferrite sorbent pellets for hot coal gas desulfurization

    Science.gov (United States)

    Jha, Mahesh C.; Blandon, Antonio E.; Hepworth, Malcolm T.

    1988-01-01

    Durable, porous sulfur sorbents useful in removing hydrogen sulfide from hot coal gas are prepared by water pelletizing a mixture of fine zinc oxide and fine iron oxide with inorganic and organic binders and small amounts of activators such as sodium carbonate and molybdenite; the pellets are dried and then indurated at a high temperature, e.g., 1800.degree. C., for a time sufficient to produce crush-resistant pellets.

  7. Interventions communautaires durables visant à améliorer l ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Interventions communautaires durables visant à améliorer l'environnement et la santé dans les bidonvilles de Banda, à Kampala (Ouganda). L'urbanisation rapide est l'un des grands défis du XXIe siècle. Environ 12 000 personnes vivent dans la paroisse de Banda, dans la partie est de Kampala. Ce secteur marécageux ...

  8. Chemical durability of zinc borosilicate nuclear waste glass

    International Nuclear Information System (INIS)

    Westsik, J.H. Jr.; Mendel, J.E.

    1977-03-01

    Chemical durability is of primary concern when evaluating the safety of waste glass. For this reason, testing the leachability of waste glasses is a fundamental part of their development and characterization. The leachability is also very much a function of glass composition as previously discussed. This discussion is limited to a representative waste glass composition, a high-zinc borosilicate formulation which has been studied in detail by Battelle Pacific Northwest Laboratories

  9. Performance Evaluation and Durability Studies of Adhesive Bonds

    OpenAIRE

    Ranade, Shantanu Rajendra

    2014-01-01

    In this dissertation, four test approaches were developed to characterize the adhesion performance and durability of adhesive bonds for specific applications in areas spanning from structural adhesive joints to popular confectionaries such as chewing gum. In the first chapter, a double cantilever beam (DCB) specimen geometry is proposed for combinatorial fracture studies of structural adhesive bonds. This specimen geometry enabled the characterization of fracture energy vs. bondline thickness...

  10. THE CONCEPT OF COMPETITIVE ADVANTAGES. LOGIC, SOURCES AND DURABILITY

    OpenAIRE

    Cegliński, Paweł

    2017-01-01

    Purpose: The main purpose of this article is to present theoretical assumptions of the concept of competitive advantages and main problems connected with the same. Most of all, the article outlines issues, which are presently discussed in the field of management sciences, including sources of competitive advantages, causal ambiguity and character of durability of competitive advantages in the contemporary turbulent business environment. In the author’s opinion, the issues have a great signifi...

  11. AGRICULTURE DURABLE De nouvelles pratiques sont source de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    17 nov. 2010 ... Depuis 1970, les travaux de recherche soutenus par le CRDI ont permis à des agriculteurs et à des collectivités de pays en développement d'adopter des pratiques agricoles durables. Le résultant? Une productivité accrue, un recul de la pauvreté, une plus grande sécurité alimentaire et un environnement ...

  12. The influence of adherent surface preparation on bond durability

    International Nuclear Information System (INIS)

    Rider, A.N.; Arnott, D.R.; Olsson-Jacques, C.L.

    1999-01-01

    Full text: One of the major factors limiting the use of adhesive bonding is the problem associated with the production of adhesive joints that can maintain their initial strength over long periods of time in hostile environments. It is well known that the adherent surface preparation method is critical to the formation of a durable adhesive bond. Work presented in this paper focuses on the critical aspects of the surface preparation of aluminium employed for the manufacture of aluminium-epoxy joints. The surface preparation procedure examined is currently employed by the RAAF for repairs requiring metal to adhesive bonding. The influence of each step in the surface preparation on the ultimate bond durability performance of the adhesive joint is examined by a combination of methods. Double cantilever wedge style adhesive joints are loaded in mode 1 opening and then exposed to a humid environment. X-ray photoelectron spectroscopy (XPS) and contact angle measurements of the aluminium adherent before bonding provides information about the adherent surface chemistry. XPS is also employed to analyse the surfaces of the bonded specimens post failure to establish the locus of fracture. This approach provides important information regarding the properties influencing bond durability as well as the bond failure mechanisms. A two step bond degradation model was developed to qualitatively describe the observed bond durability performance and fracture data. The first step involves controlled moisture ingress by stress induced microporosity of the adhesive in the interfacial region. The second step determines the locus of fracture through the relative dominance of one of three competitive processes, viz: oxide degradation, polymer desorption, or polymer degradation. A key element of the model is the control exercised over the interfacial microporosity by the combined interaction of stress and the relative densities of strong and weak linkages at the metal to adhesive interface

  13. Durability Requirements to the Reinforced Concrete used in Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Quintero Castro, F.P.; Di Fonzo-Balmaceda, M.G.

    2015-07-01

    The purpose of this document is to clarify how the durability requirements of (ACI 349, ACI 301 and ACI 207R) can be met through the use of technical specifications given in the Euro Codes, establishing an equivalence between the requirements shown in both regulations (ACI and Euro Codes) by means of the Identification of failure mechanisms, origins and effects. Most European codes provide a useful life span of 50 to 100 years, which could be low for some nuclear installations. (Author)

  14. Thermally induced rock stress increment and rock reinforcement response

    International Nuclear Information System (INIS)

    Hakala, M.; Stroem, J.; Nujiten, G.; Uotinen, L.; Siren, T.; Suikkanen, J.

    2014-07-01

    This report describes a detailed study of the effect of thermal heating by the spent nuclear fuel containers on the in situ rock stress, any potential rock failure, and associated rock reinforcement strategies for the Olkiluoto underground repository. The modelling approach and input data are presented together repository layout diagrams. The numerical codes used to establish the effects of heating on the in situ stress field are outlined, together with the rock mass parameters, in situ stress values, radiogenic temperatures and reinforcement structures. This is followed by a study of the temperature and stress evolution during the repository's operational period and the effect of the heating on the reinforcement structures. It is found that, during excavation, the maximum principal stress is concentrated at the transition areas where the profile changes and that, due to the heating from the deposition of spent nuclear fuel, the maximum principal stress rises significantly in the tunnel arch area of NW/SW oriented central tunnels. However, it is predicted that the rock's crack damage (CD, short term strength) value of 99 MPa will not be exceeded anywhere within the model. Loads onto the reinforcement structures will come from damaged and loosened rock which is assumed in the modelling as a free rock wedge - but this is very much a worst case scenario because there is no guarantee that rock cracking would form a free rock block. The structural capacity of the reinforcement structures is described and it is predicted that the current quantity of the rock reinforcement is strong enough to provide a stable tunnel opening during the peak of the long term stress state, with damage predicted on the sprayed concrete liner. However, the long term stability and safety can be improved through the implementation of the principles of the Observational Method. The effect of ventilation is also considered and an additional study of the radiogenic heating effect on the brittle

  15. Electrical Resistivity of Concrete for Durability Evaluation: A Review

    Directory of Open Access Journals (Sweden)

    Pejman Azarsa

    2017-01-01

    Full Text Available Degradation processes in reinforced concrete structures that affect durability are partially controlled by transport of aggressive ions through the concrete microstructure. Ions are charged and the ability of concrete to hold out against transfer of ions greatly relies on its electrical resistivity. Hence, a connection could be expected between electrical resistivity of concrete and the deterioration processes such as increase in permeability and corrosion of embedded steel. Through this paper, an extensive literature review has been done to address relationship between concrete electrical resistivity and its certain durability characteristics. These durability characteristics include chloride diffusivity and corrosion of reinforcement as these have major influence on concrete degradation process. Overall, there exists an inverse or direct proportional correlation between these parameters. Evaluated results, from measuring the concrete electrical resistivity, can also be used as a great indicator to identify early age characteristics of fresh concrete and for evaluation of its properties, determination of moisture content, connectivity of the micropores, and even condition assessment of in-service structures. This paper also reviews and assesses research concerning the influential parameters such as environmental conditions and presence of steel rebar and cracks on measuring electrical resistivity of concrete. Moreover, concrete resistivity concept, application, and its various measurement techniques are introduced.

  16. Use of recycled fine aggregate in concretes with durable requirements.

    Science.gov (United States)

    Zega, Claudio Javier; Di Maio, Angel Antonio

    2011-11-01

    The use of construction waste materials as aggregates for concrete production is highly attractive compared to the use of non-renewable natural resources, promoting environmental protection and allowing the development of a new raw material. Several countries have recommendations for the use of recycled coarse aggregate in structural concrete, whereas the use of the fine fraction is limited because it may produce significant changes in some properties of concrete. However, during the last decade the use of recycled fine aggregates (RFA) has achieved a great international interest, mainly because of economic implications related to the shortage of natural sands suitable for the production of concrete, besides to allow an integral use of this type of waste. In this study, the durable behaviour of structural concretes made with different percentage of RFA (0%, 20%, and 30%) is evaluated. Different properties related to the durability of concretes such as absorption, sorptivity, water penetration under pressure, and carbonation are determined. In addition, the results of compressive strength, static modulus of elasticity and drying shrinkage are presented. The obtained results indicate that the recycled concretes have a suitable resistant and durable behaviour, according to the limits indicated by different international codes for structural concrete. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. Novel Arrangements for High Performance and Durable Dielectric Elastomer Actuation

    Directory of Open Access Journals (Sweden)

    Runan Zhang

    2016-07-01

    Full Text Available This paper advances the design of Rod Pre-strained Dielectric Elastomer Actuators (RP-DEAs in their capability to generate comparatively large static actuation forces with increased lifetime via optimized electrode arrangements. RP-DEAs utilize thin stiff rods to constrain the expansion of the elastomer and maintain the in-plane pre-strain in the rod longitudinal direction. The aim is to study both the force output and the durability of the RP-DEA. Initial design of the RP-DEA had poor durability, however, it generated significantly larger force compared with the conventional DEA due to the effects of pre-strain and rod constraints. The durability study identifies the in-electro-active-region (in-AR lead contact and the non-uniform deformation of the structure as causes of pre-mature failure of the RP-DEA. An optimized AR configuration is proposed to avoid actuating undesired areas in the structure. The results show that with the optimized AR, the RP-DEA can be effectively stabilized and survive operation at least four times longer than with a conventional electrode arrangement. Finally, a Finite Element simulation was also performed to demonstrate that such AR design and optimization can be guided by analyzing the DEA structure in the state of pre-activation.

  18. Durability of direct immunofluorescence (DIF) slides stored at room temperature.

    Science.gov (United States)

    Elbendary, Amira; Zhou, Cheng; Truong, Jonathan; Elston, Dirk M

    2015-12-01

    Prior studies suggested that direct immunofluorescence (DIF) slides can be stored at room temperature. We sought to determine the durability of DIF slides stored at room temperature for 5 years. This was a retrospective study of 83 DIF slides archived at room temperature during 2010. The pattern of immunoreactants was compared with those noted in the original report. Loss of reactivity was limited to cases with weak fluorescence at original diagnosis. Loss of IgG was noted in 12.5% of cases, IgA in 12%, C3 in 10%, and IgM in 9.75%. Fibrin showed no loss of reactivity. Preservation of immunofluorescence was not related to site of deposition. Overall, a reliable diagnosis could be made in 75 of 79 archived cases (94.9%). Cases had been archived for periods varying from 4.5 to 5 years. Variations in processing and fluorochromes could affect durability. We have no way of knowing how long slides had been exposed to ultraviolet light at the time of initial examination. DIF showed excellent durability in slides kept at room temperature for 5 years. Copyright © 2015 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

  19. Durability Properties of Palm Oil Fuel Ash Self Compacting Concrete

    Directory of Open Access Journals (Sweden)

    T. Ofuyatan

    2015-02-01

    Full Text Available Self Compacting Concrete (SCC is a new innovation in technology that can flow readily into place under its own self weight and fill corner areas of reinforcement structures without the need to vibrate and without segregation of its constitute. The problem of durability of concrete structures due to inadequate compaction by skilled workers has become a source of concern globally. The shortage of skilled manpower, noise and vibration of equipment on construction sites has led to the development of self compacting concrete. This paper presents an experimental study on the durability properties of Self Compacting Concrete with partial placement of Palm Oil Fuel Ash (POFA. Twelve POFA self-compacting concretes of various strength grades were designed at varying percentages of 0, 5, 10, 15, 20, 25 and 30%. The concrete with no placement of ash served as control. Conplast SP432MS was used as superplasticiser in the mix. The experiments are carried out by adopting a water-powder ratio of 0.36. Workability of the fresh concrete is determined by using tests such as: slump flow, T50, V-funnel and L-Box tests. The durability of concrete is tested by acid resistance, sulphate attack and saturated water absorption at the age of 14, 28, 56 and 90 days.

  20. Freeze-thaw durability of air-entrained concrete.

    Science.gov (United States)

    Shang, Huai-Shuai; Yi, Ting-Hua

    2013-01-01

    One of the most damaging actions affecting concrete is the abrupt temperature change (freeze-thaw cycles). The types of deterioration of concrete structures by cyclic freeze-thaw can be largely classified into surface scaling (characterized by the weight loss) and internal crack growth (characterized by the loss of dynamic modulus of elasticity). The present study explored the durability of concrete made with air-entraining agent subjected to 0, 100, 200, 300, and 400 cycles of freeze-thaw. The experimental study of C20, C25, C30, C40, and C50 air-entrained concrete specimens was completed according to "the test method of long-term and durability on ordinary concrete" GB/T 50082-2009. The dynamic modulus of elasticity and weight loss of specimens were measured after different cycles of freeze-thaw. The influence of freeze-thaw cycles on the relative dynamic modulus of elasticity and weight loss was analyzed. The findings showed that the dynamic modulus of elasticity and weight decreased as the freeze-thaw cycles were repeated. They revealed that the C30, C40, and C50 air-entrained concrete was still durable after 300 cycles of freeze-thaw according to the experimental results.

  1. Freeze-Thaw Durability of Air-Entrained Concrete

    Directory of Open Access Journals (Sweden)

    Huai-Shuai Shang

    2013-01-01

    Full Text Available One of the most damaging actions affecting concrete is the abrupt temperature change (freeze-thaw cycles. The types of deterioration of concrete structures by cyclic freeze-thaw can be largely classified into surface scaling (characterized by the weight loss and internal crack growth (characterized by the loss of dynamic modulus of elasticity. The present study explored the durability of concrete made with air-entraining agent subjected to 0, 100, 200, 300, and 400 cycles of freeze-thaw. The experimental study of C20, C25, C30, C40, and C50 air-entrained concrete specimens was completed according to “the test method of long-term and durability on ordinary concrete” GB/T 50082-2009. The dynamic modulus of elasticity and weight loss of specimens were measured after different cycles of freeze-thaw. The influence of freeze-thaw cycles on the relative dynamic modulus of elasticity and weight loss was analyzed. The findings showed that the dynamic modulus of elasticity and weight decreased as the freeze-thaw cycles were repeated. They revealed that the C30, C40, and C50 air-entrained concrete was still durable after 300 cycles of freeze-thaw according to the experimental results.

  2. Intrinsic factors determining the physical behaviour and durability ofthe Miocene sandstones used to build the Zaghouan-Carthage aqueduct (Tunis

    Directory of Open Access Journals (Sweden)

    Zoghlami, K.

    2004-12-01

    Full Text Available The present paper addresses the relationship between the intrinsic factors, physical behaviour and durability of Miocene Age sandstone used to build Tunisian Heritage Monuments, and more specifically the Zaghouan-Carthage aqueduct. A petrography study (optical microscopy and mercury intrusion porosi metry was conducted to characterize the porous system of the rock. Stone hydric behaviour was also determined by finding vacuum saturation, desorption, capillary and water vapor transmission. Finally, mechanical strength (compressive strength, abrasion resistance and durability (via accelerated sodium sulfate crystallization ageing were also found. The results obtained were indicative of good hydric performance due to the macroporous nature of the stone and the connectivity of its porous system. This rock was also found to have very low mechanical strength due to its scant lithification, making it particularly susceptible to salt weathering. It was also observed to be highly resistant to chemical alteration, given the absence of chemically unstable minerals in its composition. The durability of the material was consequently found to depend directly on the presence or absence of salts in the monument.

    En este trabajo se estudia la relación entre los factores intrínsecos, el comportamiento físico y la alterabilidad de la arenisca miocénica utilizada en el Patrimonio Monumental de Túnez, en concreto, en el acueducto romano de Zaghouan-Cartago. A partir del estudio petrográfico detallado de la roca se ha caracterizado el sistema poroso mediante microscopía y porosimetría de mercurio. También se ha caracterizado su comportamiento hídrico (absorción al vacío, desorción, capilaridad, permeabilidad al vapor de agua, se ha determinado su comportamiento mecánico (resistencia a compresión, resistencia al desgaste por rozamiento y su durabilidad mediante ensayos acelerados de cristalización de sales (sulfato de sodio. Los resultados

  3. Homogeneity spoil spectroscopy

    International Nuclear Information System (INIS)

    Hennig, J.; Boesch, C.; Martin, E.; Grutter, R.

    1987-01-01

    One of the problems of in vivo MR spectroscopy of P-31 is spectra localization. Surface coil spectroscopy, which is the method of choice for clinical applications, suffers from the high-intensity signal from subcutaneous muscle tissue, which masks the spectrum of interest from deeper structures. In order to suppress this signal while maintaining the simplicity of surface coil spectroscopy, the authors introduced a small sheet of ferromagnetically dotted plastic between the surface coil and the body. This sheet destroys locally the field homogeneity and therefore all signal from structures around the coil. The very high reproducibility of the simple experimental procedure allows long-term studies important for monitoring tumor therapy

  4. Seismic response of rock joints and jointed rock mass

    International Nuclear Information System (INIS)

    Ghosh, A.; Hsiung, S.M.; Chowdhury, A.H.

    1996-06-01

    Long-term stability of emplacement drifts and potential near-field fluid flow resulting from coupled effects are among the concerns for safe disposal of high-level nuclear waste (HLW). A number of factors can induce drift instability or change the near-field flow patterns. Repetitive seismic loads from earthquakes and thermal loads generated by the decay of emplaced waste are two significant factors. One of two key technical uncertainties (KTU) that can potentially pose a high risk of noncompliance with the performance objectives of 10 CFR Part 60 is the prediction of thermal-mechanical (including repetitive seismic load) effects on stability of emplacement drifts and the engineered barrier system. The second KTU of concern is the prediction of thermal-mechanical-hydrological (including repetitive seismic load) effects on the host rock surrounding the engineered barrier system. The Rock Mechanics research project being conducted at the Center for Nuclear Waste Regulatory Analyses (CNWRA) is intended to address certain specific technical issues associated with these two KTUs. This research project has two major components: (i) seismic response of rock joints and a jointed rock mass and (ii) coupled thermal-mechanical-hydrological (TMH) response of a jointed rock mass surrounding the engineered barrier system (EBS). This final report summarizes the research activities concerned with the repetitive seismic load aspect of both these KTUs

  5. Evaluation of Rock Bolt Support for Polish Hard Rock Mines

    Science.gov (United States)

    Skrzypkowski, Krzysztof

    2018-03-01

    The article presents different types of rock bolt support used in Polish ore mining. Individual point resin and expansion rock bolt support were characterized. The roof classes for zinc and lead and copper ore mines were presented. Furthermore, in the article laboratory tests of point resin rock bolt support in a geometric scale of 1:1 with minimal fixing length of 0.6 m were made. Static testing of point resin rock bolt support were carried out on a laboratory test facility of Department of Underground Mining which simulate mine conditions for Polish ore and hard coal mining. Laboratory tests of point resin bolts were carried out, especially for the ZGH Bolesław, zinc and lead "Olkusz - Pomorzany" mine. The primary aim of the research was to check whether at the anchoring point length of 0.6 m by means of one and a half resin cartridge, the type bolt "Olkusz - 20A" is able to overcome the load.The second purpose of the study was to obtain load - displacement characteristic with determination of the elastic and plastic range of the bolt. For the best simulation of mine conditions the station steel cylinders with an external diameter of 0.1 m and a length of 0.6 m with a core of rock from the roof of the underground excavations were used.

  6. Energy and durable development: the place of the renewable energies; Energie et developpement durable: la place des energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The 29 may 2000, took place at the UNESCO, a colloquium on the place of the renewable energies facing the economic development. This document presents the opening presentation of A. Antolini and L. Jospin and the colloquium papers and debates in the following four domains: the energy challenges of the durable development, the renewable energies sources facing the european directive, the thermal renewable energies (solar, geothermics and biomass) and the greenhouse effect, the world market of the renewable energies. (A.L.B.)

  7. 30 CFR 57.3461 - Rock bursts.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Rock bursts. 57.3461 Section 57.3461 Mineral...-Underground Only § 57.3461 Rock bursts. (a) Operators of mines which have experienced a rock burst shall— (1) Within twenty four hours report to the nearest MSHA office each rock burst which: (i) Causes persons to...

  8. 30 CFR 75.402 - Rock dusting.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Rock dusting. 75.402 Section 75.402 Mineral... SAFETY STANDARDS-UNDERGROUND COAL MINES Combustible Materials and Rock Dusting § 75.402 Rock dusting... or too high in incombustible content to propagate an explosion, shall be rock dusted to within 40...

  9. Current status of crushed rock and whole rock column studies

    International Nuclear Information System (INIS)

    Vine, E.N.; Daniels, W.R.; Rundberg, R.S.; Thompson, J.L.

    1980-01-01

    Measurements on a large number of crushed rock columns of tuff, granite, and argillite are discussed. The isotopes 85 Sr, 137 Cs, 133 Ba, 141 Ce, 152 Eu, /sup 95m/Tc, and 233 U were used. Flow rates were varied from approx. 30 to approx. 30000 m/y. Other parameters studied include isotope concentration and atmosphere. The sorption ratios calculated were compared with batch sorption ratios on the same samples. Methods of studying the movement of radionuclides through whole rock cores are described. The problems associated with sealing the cores to prevent leaking along the exterior surface and one possible solution are discussed. The strontium sorption ratio obtained by elution of one solid tuff core is compared with the batch and crushed rock column sorption ratios

  10. Rock Pore Structure as Main Reason of Rock Deterioration

    Directory of Open Access Journals (Sweden)

    Ondrášik Martin

    2014-03-01

    Full Text Available Crashed or dimensional rocks have been used as natural construction material, decoration stone or as material for artistic sculptures. Especially old historical towns not only in Slovakia have had experiences with use of stones for construction purposes for centuries. The whole buildings were made from dimensional stone, like sandstone, limestone or rhyolite. Pavements were made especially from basalt, andesite, rhyolite or granite. Also the most common modern construction material - concrete includes large amounts of crashed rock, especially limestone, dolostone and andesite.

  11. Fracture characteristics in Japanese rock

    International Nuclear Information System (INIS)

    Ijiri, Yuji; Sawada, Atsushi; Akahori, Kuniaki

    1999-11-01

    It is crucial for the performance assessment of geosphere to evaluate the characteristics of fractures that can be dominant radionuclide migration pathways from a repository to biosphere. This report summarizes the characteristics of fractures obtained from broad literature surveys and the fields surveys at the Kamaishi mine in northern Japan and at outcrops and galleries throughout the country. The characteristics of fractures described in this report are fracture orientation, fracture shape, fracture frequency, fracture distribution in space, transmissivity of fracture, fracture aperture, fracture fillings, alteration halo along fracture, flow-wetted surface area in fracture, and the correlation among these characteristics. Since granitic rock is considered the archetype fractured media, a large amount of fracture data is available in literature. In addition, granitic rock has been treated as a potential host rock in many overseas programs, and has JNC performed a number of field observations and experiments in granodiorite at the Kamaishi mine. Therefore, the characteristics of fractures in granitic rock are qualitatively and quantitatively clarified to some extent in this report, while the characteristics of fractures in another rock types are not clarified. (author)

  12. Hot dry rock heat mining

    International Nuclear Information System (INIS)

    Duchane, D.V.

    1992-01-01

    Geothermal energy utilizing fluids from natural sources is currently exploited on a commercial scale at sites around the world. A much greater geothermal resource exists, however, in the form of hot rock at depth which is essentially dry. This hot dry rock (HDR) resource is found almost everywhere, but the depth at which usefully high temperatures are reached varies from place to place. The technology to mine the thermal energy from HDR has been under development for a number of years. Using techniques adapted from the petroleum industry, water is pumped at high pressure down an injection well to a region of usefully hot rock. The pressure forces open natural joints to form a reservoir consisting of a small amount of water dispensed in a large volume of hot rock. This reservoir is tapped by second well located at some distance from the first, and the heated water is brought to the surface where its thermal energy is extracted. The same water is then recirculated to mine more heat. Economic studies have indicated that it may be possible to produce electricity at competitive prices today in regions where hot rock is found relatively close to the surface

  13. Polylactic Acid-Based Polymer Blends for Durable Applications

    Science.gov (United States)

    Finniss, Adam

    There has been considerable scientific interest in both research and commercial communities as of late in the area of biologically based or sourced plastics. As the consumption of petroleum rises and concerns about climate change increase, this field is likely to grow even larger. One bioplastic that has received a great deal of attention is polylactic acid (PLA). In the past, this material was used mainly in medical or specialty applications, but advancements in manufacturing have led to a desire to use PLA more widely, especially in durable applications. Unfortunately, PLA has several drawbacks that hinder more widespread usage of the material as a durable item: it has low ductility and impact strength in bulk applications, along with poor stability in the face of heat, humidity or liquid media. To combat these deficiencies, a number of techniques were investigated. Samples were annealed to create crystalline domains that would improve mechanical properties and reduce diffusion, blended with graphene to create barriers to diffusion throughout the material, or compounded with a polycarbonate (PC) polymer phase to protect the PLA phase and to enhance the mechanical properties of the blend. If a material containing biologically sourced components with good mechanical properties can be created, it would be desirable for durable uses such as electronics components or as an automotive grade resin. Crystallization experiments were carried out in a differential scanning calorimeter to determine the effects of heat treatment and additives on the rather slow crystallization kinetics of PLA polymer. It was determined that the blending in of the PC phase did not significantly alter the kinetics or mechanism of crystal growth. The addition of graphene to any PC/PLA formulation served as a nucleating agent which speeded up the crystallization kinetics markedly, in some cases by several orders of magnitude. Results obtained from these experiments were internally consistent

  14. Thermal expansion of granite rocks

    International Nuclear Information System (INIS)

    Stephansson, O.

    1978-04-01

    The thermal expansion of rocks is strongly controlled by the thermal expansion of the minerals. The theoretical thermal expansion of the Stripa Granite is gound to be 21 . 10 -6 [deg C] -1 at 25 deg C and 38 . 10 -6 [deg C] -1 at 400 deg C. The difference in expansion for the rock forming minerals causes micro cracking at heating. The expansion due to micro cracks is found to be of the same order as the mineral expansion. Most of the micro cracks will close at pressures of the order of 10 - 20 MPa. The thermal expansion of a rock mass including the effect of joints is determined in the pilot heater test in the Stripa Mine

  15. Uranium endowments in phosphate rock

    Energy Technology Data Exchange (ETDEWEB)

    Ulrich, Andrea E., E-mail: andrea.ulrich@env.ethz.ch [Institute for Environmental Decisions (IED), Natural and Social Science Interface, ETH Zurich Universitässtrasse 22, 8092 Zurich (Switzerland); Institute for Agricultural Sciences, Plant Nutrition, ETH Zurich, Eschikon 33, 8315 Lindau (Switzerland); Schnug, Ewald, E-mail: e.schnug@tu-braunschweig.de [Department of Life Sciences, Technical University of Braunschweig, Pockelsstraße 14, D-38106 Braunschweig (Germany); Prasser, Horst-Michael, E-mail: prasser@lke.mavt.ethz.ch [Institute of Energy Technology, Laboratory of Nuclear Energy Systems, ETH Zurich, Sonneggstrasse 3, 8092 Zurich (Switzerland); Frossard, Emmanuel, E-mail: emmanuel.frossard@usys.ethz.ch [Institute for Agricultural Sciences, Plant Nutrition, ETH Zurich, Eschikon 33, 8315 Lindau (Switzerland)

    2014-04-01

    This study seeks to identify and specify the components that make up the prospects of U recovery from phosphate rock. A systems approach is taken. The assessment includes i) reviewing past recovery experience and lessons learned; ii) identifying factors that determine recovery; and iii) establishing a contemporary evaluation of U endowments in phosphate rock reserves, as well as the available and recoverable amounts from phosphate rock and phosphoric acid production. We find that in the past, recovery did not fulfill its potential and that the breakup of the Soviet Union worsened then-favorable recovery market conditions in the 1990s. We find that an estimated 5.7 million tU may be recoverable from phosphate rock reserves. In 2010, the recoverable tU from phosphate rock and phosphoric acid production may have been 15,000 tU and 11,000 tU, respectively. This could have filled the world U supply-demand gap for nuclear energy production. The results suggest that the U.S., Morocco, Tunisia, and Russia would be particularly well-suited to recover U, taking infrastructural considerations into account. We demonstrate future research needs, as well as sustainability orientations. We conclude that in order to promote investment and production, it seems necessary to establish long-term contracts at guaranteed prices, ensuring profitability for phosphoric acid producers. - Highlights: • We identify components that underlie the recovery of uranium from phosphate rock. • We estimate that 11,000 tU may have been recoverable from phosphoric acid in 2010. • Recovery is a resource conservation and environmental pollution control strategy. • To ensure investment in recovery technology, profitability needs to be secured.

  16. Uranium deposits in granitic rocks

    International Nuclear Information System (INIS)

    Nishimori, R.K.; Ragland, P.C.; Rogers, J.J.W.; Greenberg, J.K.

    1977-01-01

    This report is a review of published data bearing on the geology and origin of uranium deposits in granitic, pegmatitic and migmatitic rocks with the aim of assisting in the development of predictive criteria for the search for similar deposits in the U.S. Efforts were concentrated on the so-called ''porphyry'' uranium deposits. Two types of uranium deposits are primarily considered: deposits in pegmatites and alaskites in gneiss terrains, and disseminations of uranium in high-level granites. In Chapter 1 of this report, the general data on the distribution of uranium in igneous and metamorphic rocks are reviewed. Chapter 2 contains some comments on the classification of uranium deposits associated with igneous rocks and a summary of the main features of the geology of uranium deposits in granites. General concepts of the behavior of uranium in granites during crustal evolution are reviewed in Chapter 3. Also included is a discussion of the relationship of uranium mineralization in granites to the general evolution of mobile belts, plus the influence of magmatic and post-magmatic processes on the distribution of uranium in igneous rocks and related ore deposits. Chapter 4 relates the results of experimental studies on the crystallization of granites to some of the geologic features of uranium deposits in pegmatites and alaskites in high-grade metamorphic terrains. Potential or favorable areas for igneous uranium deposits in the U.S.A. are delineated in Chapter 5. Data on the geology of specific uranium deposits in granitic rocks are contained in Appendix 1. A compilation of igneous rock formations containing greater than 10 ppM uranium is included in Appendix 2. Appendix 3 is a report on the results of a visit to the Roessing area. Appendix 4 is a report on a field excursion to eastern Canada

  17. 20020732: Rock (14), panel (21)

    OpenAIRE

    None

    2002-01-01

    Rock Art photograph, (21); Element broken off much larger rock. [cam element='coordinate' qualifier='longitude']W 70deg34'55.5"[/cam][cam element='coordinate' qualifier='latitude']S 32deg49'48.8"[/cam][cam element='coordinate' qualifier='altitude']913[/cam][cam element='coordinate' qualifier='bearing']0[/cam][cam element='coordinate' qualifier='inclination']55[/cam][cam element='coordinate' qualifier='cartesian'](3.000,1.100,2.500)[/cam

  18. Evaluation of the Mechanical Durability of the Egyptian Machine Readable Booklet Passport

    Directory of Open Access Journals (Sweden)

    Ahmed Mahmoud Yosri

    2013-12-01

    Full Text Available In 2008 the first Egyptian booklet Machine Readable Passport/ MRP has been issued and its security and informative standard quality levels were proved in a research published in 2011. Here the durability profiles of the Egyptian MRP have been evaluated. Seven mechanical durability tests were applied on the Egyptian MRP. Such tests are specified in the International Civil Aviation Organization / ICAO standard requirements documents. These seven very severe durability tests resulted in that the Egyptian MRP has achieved better & higher results than the values detected in ICAO-Doc N0232: Durability of Machine Readable Passports - Version: 3.2. Hence, this research had proved the complete conformance between the Egyptian MRP mechanical durability profiles to the international requirements. The Egyptian booklet MRP doesn’t need any obligatory modification concerning its mechanical durability profiles.

  19. State of the art of durability-performance evaluation of hardened cement based on phase compositions

    International Nuclear Information System (INIS)

    Kurashige, Isao; Imoto, Harutake; Yamamoto, Takeshi; Hironaga, Michihiko

    2006-01-01

    Upgrading durability-performance evaluation technique for concrete is urgently demanded in connection to its application to radio-active waste repository which needs ultra long-term durability. Common concrete structures also require an advanced method for minimizing the life-cycle cost. The purpose of this research is to investigate current problems and future tasks on durability-performance evaluation of hardened cement from the view point of phase composition. Although the phase composition of hardened cement has not fully been reflected to durability-performance evaluation, it influences concrete durability as well as its pore structure. This report reviews state of the art of the factors affecting phase composition, analytical and experimental evaluation techniques for phase composition, and durability-performance evaluation methods of hardened cement based on phase composition. (author)

  20. Some rock mass assessment procedures for discontinuous crystalline rock

    International Nuclear Information System (INIS)

    Boodt, P.I.; Brown, E.T.

    1985-03-01

    Underground radioactive waste repositories place especially stringent demands on rock mass assessment and excavation design methodologies. As part of the Building Research Establishment's programme of research into geotechnical site assessment methodology, experiments were undertaken at an underground test site in granite at Troon, Cornwall, and in the Imperial College Laboratories. The results of discontinuity surveys showed that the borehole impression packer probe technique can provide an important source of information for radioactive waste repository site assessment. Similarly, borehole pressure tests can provide valuable data on discontinuity apertures and hydraulic conductivities and on rock mass permeabilities. A versatile, modular borehole pressure test system for use from restricted underground locations was developed and used successfully. Field tests gave values of equivalent parallel plate apertures and discontinuity hydraulic conductivities in similar ranges to those measured in laboratory tests on samples recovered from the site. Discontinuity normal stiffnesses were also measured successfully using the Terra Tek Geothermal Rock Mechanics Test System which proved itself capable of providing laboratory test data required to support geotechnical site assessment procedures for radioactive waste repositories in discontinuous rock. (author)

  1. Durable, Low-cost, Improved Fuel Cell Membranes

    Energy Technology Data Exchange (ETDEWEB)

    Chris Roger; David Mountz; Wensheng He; Tao Zhang

    2011-03-17

    The development of low cost, durable membranes and membranes electrode assemblies (MEAs) that operate under reduced relative humidity (RH) conditions remain a critical challenge for the successful introduction of fuel cells into mass markets. It was the goal of the team lead by Arkema, Inc. to address these shortages. Thus, this project addresses the following technical barriers from the fuel cells section of the Hydrogen Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan: (A) Durability (B) Cost Arkema’s approach consisted of using blends of polyvinylidenefluoride (PVDF) and proprietary sulfonated polyelectrolytes. In the traditional approach to polyelectrolytes for proton exchange membranes (PEM), all the required properties are “packaged” in one macromolecule. The properties of interest include proton conductivity, mechanical properties, durability, and water/gas transport. This is the case, for example, for perfluorosulfonic acid-containing (PFSA) membranes. However, the cost of these materials is high, largely due to the complexity and the number of steps involved in their synthesis. In addition, they suffer other shortcomings such as mediocre mechanical properties and insufficient durability for some applications. The strength and originality of Arkema’s approach lies in the decoupling of ion conductivity from the other requirements. Kynar® PVDF provides an exceptional combination of properties that make it ideally suited for a membrane matrix (Kynar® is a registered trademark of Arkema Inc.). It exhibits outstanding chemical resistance in highly oxidative and acidic environments. In work with a prior grant, a membrane known as M41 was developed by Arkema. M41 had many of the properties needed for a high performance PEM, but had a significant deficiency in conductivity at low RH. In the first phase of this work, the processing parameters of M41 were explored as a means to increase its proton

  2. Methods for Using Durable Adhesively Bonded Joints for Sandwich Structures

    Science.gov (United States)

    Smeltzer, Stanley S., III (Inventor); Lundgren, Eric C. (Inventor)

    2016-01-01

    Systems, methods, and apparatus for increasing durability of adhesively bonded joints in a sandwich structure. Such systems, methods, and apparatus includes an first face sheet and an second face sheet as well as an insert structure, the insert structure having a first insert face sheet, a second insert face sheet, and an insert core material. In addition, sandwich core material is arranged between the first face sheet and the second face sheet. A primary bondline may be coupled to the face sheet(s) and the splice. Further, systems, methods, and apparatus of the present disclosure advantageously reduce the load, provide a redundant path, reduce structural fatigue, and/or increase fatigue life.

  3. Deformable and durable phantoms with controlled density of scatterers

    Energy Technology Data Exchange (ETDEWEB)

    Bisaillon, Charles-Etienne; Lamouche, Guy; Dufour, Marc; Monchalin, Jean-Pierre [Industrial Materials Institute, National Research Council Canada, 75 de Mortagne, Boucherville, Quebec J4B 6Y4 (Canada); Maciejko, Romain [Optoelectronics Laboratory, Engineering Physics, Ecole Polytechnique de Montreal, PO Box 6079, Station ' Centre-ville' Montreal, Quebec H3C 3A7 (Canada)], E-mail: charles-etienne.bisaillon@cnrc-nrc.gc.ca, E-mail: guy.lamouche@cnrc-nrc.gc.ca, E-mail: marc.dufour@cnrc-nrc.gc.ca, E-mail: jean-pierre.monchalin@cnrc-nrc.gc.ca, E-mail: romain.maciejko@polytml.ca

    2008-07-07

    We have developed deformable and durable optical tissue phantoms with a simple and well-defined microstructure including a novel combination of scatterers and a matrix material. These were developed for speckle and elastography investigations in optical coherence tomography, but should prove useful in many other fields. We present in detail the fabrication process which involves embedding silica microspheres in a silicone matrix. We also characterize the resulting phantoms with scanning electron microscopy and optical measurements. To our knowledge, no such phantoms were proposed in the literature before. Our technique has a wide range of applicability and could also be adapted to fabricate phantoms with various optical and mechanical properties. (note)

  4. Towards an european strategy of safe and durable energy supply

    International Nuclear Information System (INIS)

    Palacio, L. de

    2001-07-01

    This paper is a copy of the speech of L. de Palacio, vice-president of the european commission, in charge of the energy and the transports, concerning the european strategy of safe and durable energy supplying. The author analyses the today and future situations and emphasizes on the european responsibility and the world prejudice. The petroleum supply dependence in thirty years and the environment policy lead to a diversification of the energy sources and a better international cooperation with the producers countries. (A.L.B.)

  5. Durable zinc oxide-containing sorbents for coal gas desulfurization

    Science.gov (United States)

    Siriwardane, Ranjani V.

    1996-01-01

    Durable zinc-oxide containing sorbent pellets for removing hydrogen sulfide from a gas stream at an elevated temperature are made up to contain titania as a diluent, high-surface-area silica gel, and a binder. These materials are mixed, moistened, and formed into pellets, which are then dried and calcined. The resulting pellets undergo repeated cycles of sulfidation and regeneration without loss of reactivity and without mechanical degradation. Regeneration of the pellets is carried out by contacting the bed with an oxidizing gas mixture.

  6. Water-thinnable polymers for durable coatings for different materials

    Energy Technology Data Exchange (ETDEWEB)

    Jankowski, Piotr, E-mail: piotr.jankowski@ichp.pl; Kijowska, Dorota, E-mail: piotr.jankowski@ichp.pl [Industrial Chemistry Research Institute, Department of Polyesters, Epoxides and Polyurethanes, 8 Rydygiera Str., 01-793 Warszawa (Poland)

    2014-05-15

    The methods of obtaining water-thinnable polymers - water-thinnable unsaturated polyester resins (WTUPR) - by polycondensation were elaborate and optimized. As hydrophilic monomers different types of sulfonate monomers were used. The monomers, with sulfonate groups and other reactive groups, were obtained by sulfonation of organic compounds with satisfactory yield. All products were analyzed by {sup 1}H NMR and {sup 13}C NMR spectra. WTUPR were used as polymeric binders for coatings applications. Coatings with relatively high pendulum hardness, good properties and durability, useful for practical applications, were obtained. Typical existing equipment for the production of unsaturated polyester resins can be applied for the industrial preparation of WTUPR.

  7. Durability of cracked fibre reinforced concrete structures exposed to chlorides

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place; Ekman, Tom; Hansen, Kurt Kielsgaard

    1999-01-01

    Durability studies are carried out by subjecting FRC-beams to combined mechanical and environmental load. Mechanical load is obtained by exposing beams to 4-point bending until a predefined crack width is reached, using a newly developed test setup. Exposure to a concentrated chloride solution...... is used as environmental load. The chloride penetration is characterized both qualitatively (UV-test) and quantitatively (chloride profile) and by microscopy. The test programme involves three different concrete qualities. Both steel fibres and polypropylene fibres are used in the concrete beams as well...... as main reinforcement. The effect of the cracks, the fibres and the concrete quality on the chloride penetration is studied....

  8. Increased durability concrete for generation of pillars power lines

    Directory of Open Access Journals (Sweden)

    Yakovlev Grigory

    2016-01-01

    Full Text Available In this researches multilayered carbon nanotubes of production of the French corporation “Arkema” were used. It has followed features: diameter of 10-15 nanometers and up to 15 microns long. Multilayered carbon nanotubes were used for increasing of physics and technology properties of cement concrete. It was established that at introduction of multilayered carbon nanotubes in amount of 0.006% of the mass led concrete durability increases by 28%, resistance to frost from F200 to F400, tightness to water from W8 to W14.

  9. Tiling as a Durable Abstraction for Parallelism and Data Locality

    Energy Technology Data Exchange (ETDEWEB)

    Unat, Didem [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chan, Cy P. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Zhang, Weiqun [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bell, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Shalf, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-11-18

    Tiling is a useful loop transformation for expressing parallelism and data locality. Automated tiling transformations that preserve data-locality are increasingly important due to hardware trends towards massive parallelism and the increasing costs of data movement relative to the cost of computing. We propose TiDA as a durable tiling abstraction that centralizes parameterized tiling information within array data types with minimal changes to the source code. The data layout information can be used by the compiler and runtime to automatically manage parallelism, optimize data locality, and schedule tasks intelligently. In this study, we present the design features and early interface of TiDA along with some preliminary results.

  10. The Effectiveness of Materials Different with Regard to Increasing the Durability

    Directory of Open Access Journals (Sweden)

    Erofeev Vladimir

    2016-01-01

    Full Text Available The article considers contemporary materials and structures for construction of buildings. The article conducts an economic study of the problem of durability. It addresses the issue of increasing longevity, affecting the term of service to building structures and the efficiency of their operation. Revealed the main factors affecting the durability. It identifies measures its realisation. The method of calculation of economic efficiency of improving the durability of building constructions.

  11. Durable silver mirror with ultra-violet thru far infra-red reflection

    Science.gov (United States)

    Wolfe, Jesse D.

    2010-11-23

    A durable highly reflective silver mirror characterized by high reflectance in a broad spectral range of about 300 nm in the UV to the far infrared (.about.10000 nm), as well as exceptional environmental durability. A high absorptivity metal underlayer is used which prevents the formation of a galvanic cell with a silver layer while increasing the reflectance of the silver layer. Environmentally durable overcoat layers are provided to enhance mechanical and chemical durability and protect the silver layer from corrosion and tarnishing, for use in a wide variety of surroundings or climates, including harsh or extreme environments.

  12. Durable, High Thermal Conductivity Melt Infiltrated Ceramic Composites for Turbine Engine Applications, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Durable, creep-resistant ceramic composites are necessary to meet the increased operating temperatures targeted for advanced turbine engines. Higher operating...

  13. Los abuelos de nuestro rock

    OpenAIRE

    Jacobo Celnik

    2016-01-01

    Los Yetis. Una bomba atómica a go go. La historia de los abuelos de nuestro rock. Diego Londoño; Pulso & Letra Editores, Instituto para el Desarrollo de Antioquia, Instituto de Cultura y Patrimonio de Antioquia, 2014, 98 págs., fotografías.

  14. Simulation of rock deformation behavior

    Directory of Open Access Journals (Sweden)

    Я. И. Рудаев

    2016-12-01

    Full Text Available A task of simulating the deformation behavior of geomaterials under compression with account of over-extreme branch has been addressed. The physical nature of rock properties variability as initially inhomogeneous material is explained by superposition of deformation and structural transformations of evolutionary type within open nonequilibrium systems. Due to this the description of deformation and failure of rock is related to hierarchy of instabilities within the system being far from thermodynamic equilibrium. It is generally recognized, that the energy function of the current stress-strain state is a superposition of potential component and disturbance, which includes the imperfection parameter accounting for defects not only existing in the initial state, but also appearing under load. The equation of state has been obtained by minimizing the energy function by the order parameter. The imperfection parameter is expressed through the strength deterioration, which is viewed as the internal parameter of state. The evolution of strength deterioration has been studied with the help of Fokker – Planck equation, which steady form corresponds to rock statical stressing. Here the diffusion coefficient is assumed to be constant, while the function reflecting internal sliding and loosening of the geomaterials is assumed as an antigradient of elementary integration catastrophe. Thus the equation of state is supplemented with a correlation establishing relationship between parameters of imperfection and strength deterioration. While deformation process is identified with the change of dissipative media, coupled with irreversible structural fluctuations. Theoretical studies are proven with experimental data obtained by subjecting certain rock specimens to compression.

  15. Los abuelos de nuestro rock

    Directory of Open Access Journals (Sweden)

    Jacobo Celnik

    2016-12-01

    Full Text Available Los Yetis. Una bomba atómica a go go. La historia de los abuelos de nuestro rock. Diego Londoño; Pulso & Letra Editores, Instituto para el Desarrollo de Antioquia, Instituto de Cultura y Patrimonio de Antioquia, 2014, 98 págs., fotografías.

  16. Recyclable magnetite-silver heterodimer nanocomposites with durable antibacterial performance

    Directory of Open Access Journals (Sweden)

    Chunyan Yong

    2018-03-01

    Full Text Available There is a significant need for magnetite-silver nanocomposites that exhibit durable and recyclable antimicrobial activity. In this study, magnetic iron oxide nanoparticles (Fe3O4 NPs coated with ethylenediamine-modified chitosan/polyacrylic acid copolymeric layer (Fe3O4@ECS/PAA were fabricated. Subsequently, directly deposited silver (Ag NPs procedure was carried out to form the antibacterial heterodimers of Fe3O4@ECS/PAA-Ag NPs. The composition and morphology of the resultant nanostructures were confirmed by FT-IR, XRD, TEM and TGA. The overall length of the heterodimers was approximately 45 nm, in which the mean diameter of Fe3O4@ECS/PAA NPs reached up to 35 nm, and that of Ag NPs was around 15 nm. The mass fraction of silver NPs in the nanocomposites was about 63.1%. The obtained Fe3O4@ECS/PAA NPs exhibited good colloidal stability, and excellent response to additional magnetic field, making the NPs easy to recover after antibacterial tests. In particular, the Fe3O4@ECS/PAA-Ag NPs retained nearly 100% biocidal efficiency (106–107 CFU/mg nanoparticles for both Gram-negative bacteria E. coli and Gram-positive bacteria S. aureus throughout ten cycles without washing with any solvents or water, exhibiting potent and durable antibacterial activity.

  17. Durability of conventional concretes containing black rice husk ash.

    Science.gov (United States)

    Chatveera, B; Lertwattanaruk, P

    2011-01-01

    In this study, black rice husk ash (BRHA) from a rice mill in Thailand was ground and used as a partial cement replacement. The durability of conventional concretes with high water-binder ratios was investigated including drying shrinkage, autogenous shrinkage, depth of carbonation, and weight loss of concretes exposed to hydrochloric (HCl) and sulfuric (H(2)SO(4)) acid attacks. Two different replacement percentages of cement by BRHA, 20% and 40%, and three different water-binder ratios (0.6, 0.7 and 0.8) were used. The ratios of paste volume to void content of the compacted aggregate (γ) were 1.2, 1.4, and 1.6. As a result, when increasing the percentage replacement of BRHA, the drying shrinkage and depth of carbonation reaction of concretes increased. However, the BRHA provides a positive effect on the autogenous shrinkage and weight loss of concretes exposed to hydrochloric and sulfuric acid attacks. In addition, the resistance to acid attack was directly varied with the (SiO(2) + Al(2)O(3) + Fe(2)O(3))/CaO ratio. Results show that ground BRHA can be applied as a pozzolanic material and also improve the durability of concrete. Copyright © 2010 Elsevier Ltd. All rights reserved.

  18. Highly efficient and durable TiN nanofiber electrocatalyst supports.

    Science.gov (United States)

    Kim, Hyun; Cho, Min Kyung; Kwon, Jeong An; Jeong, Yeon Hun; Lee, Kyung Jin; Kim, Na Young; Kim, Min Jung; Yoo, Sung Jong; Jang, Jong Hyun; Kim, Hyoung-Juhn; Nam, Suk Woo; Lim, Dong-Hee; Cho, EunAe; Lee, Kwan-Young; Kim, Jin Young

    2015-11-28

    To date, carbon-based materials including various carbon nanostructured materials have been extensively used as an electrocatalyst support for proton exchange membrane fuel cell (PEMFC) applications due to their practical nature. However, carbon dissolution or corrosion caused by high electrode potential in the presence of O2 and/or water has been identified as one of the main failure modes for the device operation. Here, we report the first TiN nanofiber (TNF)-based nonwoven structured materials to be constructed via electrospinning and subsequent two-step thermal treatment processes as a support for the PEMFC catalyst. Pt catalyst nanoparticles (NPs) deposited on the TNFs (Pt/TNFs) were electrochemically characterized with respect to oxygen reduction reaction (ORR) activity and durability in an acidic medium. From the electrochemical tests, the TNF-supported Pt catalyst was better and more stable in terms of its catalytic performance compared to a commercially available carbon-supported Pt catalyst. For example, the initial oxygen reduction performance was comparable for both cases, while the Pt/TNF showed much higher durability from an accelerated degradation test (ADT) configuration. It is understood that the improved catalytic roles of TNFs on the supported Pt NPs for ORR are due to the high electrical conductivity arising from the extended connectivity, high inertness to the electrochemical environment and strong catalyst-support interactions.

  19. Revisiting the role of durable polymers in cardiovascular devices.

    Science.gov (United States)

    Mori, Hiroyoshi; Otsuka, Fumiyuki; Gupta, Anuj; Jinnouchi, Hiroyuki; Torii, Sho; Harari, Emanuel; Virmani, Renu; Finn, Aloke V

    2017-11-01

    Polymers are an essential component of drug-eluting stents (DES) used to control drug release but remain the most controversial component of DES technology. There are two types of polymers employed in DES: durable polymer based DES (DP-DES) and biodegradable polymer DES (BP-DES). First-generation DES were exclusively composed of DP and demonstrated increased rates of late stent failure due in part to poor polymer biocompatibility. Newer generations DES use more biocompatible durable polymers or biodegradable polymers. Areas covered: We will cover issues identified with 1st-generation DP-DES, areas of success and failure in 2nd-generation DP-DES and examine the promise and shortcomings of BP-DES. Briefly, fluorinated polymers used in 2nd-generation DP-DES have excellent anti-thrombogenicity and better biocompatibility than 1st-generation DES polymers. However, these devices lead to persistent drug exposure to the endothelium which impairs endothelial function and predisposes towards neoatherosclerosis. Meanwhile, BP-DES has shortened the duration of drug exposure which might be beneficial for endothelial functional recovery leading to less neoatherosclerosis. However, it remains uncertain whether the long-term biocompatibility of bare metal surfaces is better than that of polymer-coated metals. Expert commentary: Each technology has distinct advantages, which can be optimized depending upon the particular characteristics of the patient being treated.

  20. Durability Study on High Calcium Fly Ash Based Geopolymer Concrete

    Directory of Open Access Journals (Sweden)

    Ganesan Lavanya

    2015-01-01

    Full Text Available This study presents an investigation into the durability of geopolymer concrete prepared using high calcium fly ash along with alkaline activators when exposed to 2% solution of sulfuric acid and 5% magnesium sulphate for up to 45 days. The durability was also assessed by measuring water absorption and sorptivity. Ordinary Portland cement concrete was also prepared as control concrete. The grades chosen for the investigation were M20, M40, and M60. The alkaline solution used for present study is the combination of sodium silicate and sodium hydroxide solution with the ratio of 2.50. The molarity of sodium hydroxide was fixed as 12. The test specimens were 150×150×150 mm cubes, 100×200 mm cylinders, and 100×50 mm discs cured at ambient temperature. Surface deterioration, density, and strength over a period of 14, 28, and 45 days were observed. The results of geopolymer and ordinary Portland cement concrete were compared and discussed. After 45 days of exposure to the magnesium sulfate solution, the reduction in strength was up to 12% for geopolymer concrete and up to 25% for ordinary Portland cement concrete. After the same period of exposure to the sulphuric acid solution, the compressive strength decrease was up to 20% for geopolymer concrete and up to 28% for ordinary Portland cement concrete.

  1. Fatigue behaviour analysis for the durability prequalification of strengthening mortars

    International Nuclear Information System (INIS)

    Bocca, P; Grazzini, A; Masera, D

    2011-01-01

    An innovative laboratory procedure used as a preliminary design stage for the pre-qualification of strengthening mortars applied to historical masonry buildings is described. In the analysis of the behaviour of masonry structures and their constituent materials, increasing importance has been assumed by the study of the long-term evolution of deformation and mechanical characteristics, which may be affected by both loading and environmental conditions. Through static and fatigue tests on mixed specimens historical brick-reinforced mortar it has been possible to investigate the durability of strengthening materials, in order to select, from a range of alternatives, the most suitable for the historical masonry. Cyclic fatigue stress has been applied to accelerate the static creep and to forecast the corresponding creep behaviour of the historical brick-strengthening mortar system under static long-time loading. This methodology has proved useful in avoiding the errors associated with materials that are not mechanically compatible and guarantees the durability of strengthening work. The experimental procedure has been used effectively in the biggest restoration building site in Europe, the Royal Palace of Venaria, and it is in progress of carrying out at the Special Natural Reserve of the Sacro Monte di Varallo, in Piedmont (Italy).

  2. Towards a durable management of genetic resistances to Leptosphaeria maculans

    Directory of Open Access Journals (Sweden)

    Pinochet Xavier

    2003-05-01

    Full Text Available Blackeg is the major disease of winter oilseed rape in France. For an efficient control of the disease several tools could be combined, but mainly plant breeding has been used to increase winter oilseed rape resistance to blackleg. A useful step was reached in the nineties, using a specific resistance gene (Rlm1. After being widely used this resistance was broken down by an increase of the virulent sub-populations of the fungus. Such a situation worried the different actors and raised the question of the promotion of a durable management of genetic resistances to Leptosphaeria. After a synthetic presentation of the state of the art in the fields of genetics of resistance, of Leptosphaeria populations and on agronomic practices able to control the pathogen, the promotion of a durable management of resistances is discussed. This target needs to precise the strategy, to improve methodologies to characterise genotypes, to promote proper agronomic practices, to follow Leptosphaeria population behaviour and to motivate economic actors.

  3. Durable solid oxide electrolysis cells for hydrogen production

    DEFF Research Database (Denmark)

    Sun, Xiufu; Chen, Ming; Hendriksen, Peter Vang

    2014-01-01

    Solid oxide cell (SOC) for electrolysis application has attracted great interest in recent years due to its high power-to-gas efficiency and capability of co-electrolysis of H2O and CO2 for syngas (H2 + CO) production. The demonstration of durable solid oxide electrolysis cell operation for fuel...... increased during the durability test. Further analyses of the cell impedance show that both the LSCFCGO electrode and Ni-YSZ electrode degraded and the degradation was dominated by that of the Ni-YSZ electrode. Post-mortem analysis on the Ni-YSZ electrode revealed loss of percolation between Ni-Ni grains...... and changing of porosity inside the active layer. The degree of these microstructural changes becomes less and less severe along the hydrogen-steam flow path. The present test results show that this type of cell can be used for early demonstration electrolysis at 1A/cm2. Future work should be focus on reducing...

  4. Durable concrete for a waste repository - Measurement of ionic ingress

    International Nuclear Information System (INIS)

    Feldman, R.F.; Beaudoin, J.J.; Philipose, K.E.

    1990-01-01

    A waste repository for the below ground disposal of low level radioactive waste is planned at Chalk River Nuclear Laboratories. It relies greatly on the durability of concrete for the required 500 year service life. A research program to design durable concrete and predict its service life is in progress. The degradation of the concrete depends to a large extent on the rate of ingress of corrosive agents. Penetration of chloride and sulfate ions are particularly relevant. Twenty mix formulations were developed to create various types and qualities of concrete, and to study their behavior in different site environmental conditions. A total of 1,000 concrete specimens are being exposed at 20C and 45C to 25 different combinations of the corrosive agents including CO 2 . Procedures to measure the ionic profiles and to determine the factors controlling diffusion of the ions in the various concretes have been developed. Results of selected concrete systems exposed to chloride and sulfate solutions for 1 year are presented and discussed in terms of pore structure and permeability parameters of the concrete

  5. Harnessing effector-triggered immunity for durable disease resistance

    Science.gov (United States)

    Zhang, Meixiang; Coaker, Gitta

    2018-01-01

    Genetic control of plant diseases has traditionally included the deployment of single immune receptors with nucleotide-binding leucine-rich repeat (NLR) domain architecture. These NLRs recognize corresponding pathogen effector proteins inside plant cells, resulting in effector-triggered immunity (ETI). Although ETI triggers robust resistance, deployment of single NLRs can be rapidly overcome by pathogen populations within a single or a few growing seasons. In order to generate more durable disease resistance against devastating plant pathogens, a multi-tiered strategy that incorporates stacked NLRs combined with other sources of disease resistance is necessary. New genetic and genomic technologies have enabled advancements in identifying conserved pathogen effectors, isolating NLR repertoires from diverse plants, and editing plant genomes to enhance resistance. Significant advancements have also been made in understanding plant immune perception at the receptor level, which has promise for engineering new sources of resistance. Here, we discuss how to utilize recent scientific advancements in a multilayered strategy for developing more durable disease resistance. PMID:28430023

  6. Durable superhydrophobic carbon soot coatings for sensor applications

    Science.gov (United States)

    Esmeryan, K. D.; Radeva, E. I.; Avramov, I. D.

    2016-01-01

    A novel approach for the fabrication of durable superhydrophobic (SH) carbon soot coatings used in quartz crystal microbalance (QCM) based gas or liquid sensors is reported. The method uses modification of the carbon soot through polymerization of hexamethyldisiloxane (HMDSO) by means of glow discharge RF plasma. The surface characterization shows a fractal-like network of carbon nanoparticles with diameter of ~50 nm. These particles form islands and cavities in the nanometer range, between which the plasma polymerized hexamethyldisiloxane (PPHMDSO) embeds and binds to the carbon chains and QCM surface. Such modified surface structure retains the hydrophobic nature of the soot and enhances its robustness upon water droplet interactions. Moreover, it significantly reduces the insertion loss and dynamic resistance of the QCM compared to the commonly used carbon soot/epoxy resin approach. Furthermore, the PPHMDSO/carbon soot coating demonstrates durability and no aging after more than 40 probing cycles in water based liquid environments. In addition, the surface layer keeps its superhydrophobicity even upon thermal annealing up to 540 °C. These experiments reveal an opportunity for the development of soot based SH QCMs with improved electrical characteristics, as required for high-resolution gas or liquid measurements.

  7. Durable superhydrophobic carbon soot coatings for sensor applications

    International Nuclear Information System (INIS)

    Esmeryan, K D; Radeva, E I; Avramov, I D

    2016-01-01

    A novel approach for the fabrication of durable superhydrophobic (SH) carbon soot coatings used in quartz crystal microbalance (QCM) based gas or liquid sensors is reported. The method uses modification of the carbon soot through polymerization of hexamethyldisiloxane (HMDSO) by means of glow discharge RF plasma. The surface characterization shows a fractal-like network of carbon nanoparticles with diameter of ∼50 nm. These particles form islands and cavities in the nanometer range, between which the plasma polymerized hexamethyldisiloxane (PPHMDSO) embeds and binds to the carbon chains and QCM surface. Such modified surface structure retains the hydrophobic nature of the soot and enhances its robustness upon water droplet interactions. Moreover, it significantly reduces the insertion loss and dynamic resistance of the QCM compared to the commonly used carbon soot/epoxy resin approach. Furthermore, the PPHMDSO/carbon soot coating demonstrates durability and no aging after more than 40 probing cycles in water based liquid environments. In addition, the surface layer keeps its superhydrophobicity even upon thermal annealing up to 540 °C. These experiments reveal an opportunity for the development of soot based SH QCMs with improved electrical characteristics, as required for high-resolution gas or liquid measurements. (paper)

  8. Technology of combined chemical-mechanical fabrication of durable coatings

    Science.gov (United States)

    Smolentsev, V. P.; Ivanov, V. V.; Portnykh, A. I.

    2018-03-01

    The article presents the scientific fundamentals of methodology for calculating the modes and structuring the technological processes of combined chemical-mechanical fabrication of durable coatings. It is shown that they are based on classical patterns, describing the processes of simultaneous chemical and mechanical impact. The paper demonstrates the possibility of structuring a technological process, taking into account the systematic approach to impact management and strengthening the reciprocal positive influence of each impact upon the combined process. The combined processes have been planned for fabricating the model types of chemical-mechanical coatings of durable products in machine construction. The planning methodology is underpinned by a scientific hypothesis of a single source of impact management through energy potential of process components themselves, or by means of external energy supply through mechanical impact. The control of it is fairly thoroughly studied in the case of pulsed external strikes of hard pellets, similar to processes of vibroimpact hardening, thoroughly studied and mastered in many scientific schools of Russia.

  9. Final Report - MEA and Stack Durability for PEM Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    Yandrasits, Michael A.

    2008-02-15

    Proton exchange membrane fuel cells are expected to change the landscape of power generation over the next ten years. For this to be realized one of the most significant challenges to be met for stationary systems is lifetime, where 40,000 hours of operation with less than 10% decay is desired. This project conducted fundamental studies on the durability of membrane electrode assemblies (MEAs) and fuel cell stack systems with the expectation that knowledge gained from this project will be applied toward the design and manufacture of MEAs and stack systems to meet DOE’s 2010 stationary fuel cell stack systems targets. The focus of this project was PEM fuel cell durability – understanding the issues that limit MEA and fuel cell system lifetime, developing mitigation strategies to address the lifetime issues and demonstration of the effectiveness of the mitigation strategies by system testing. To that end, several discoveries were made that contributed to the fundamental understanding of MEA degradation mechanisms. (1) The classically held belief that membrane degradation is solely due to end-group “unzipping” is incorrect; there are other functional groups present in the ionomer that are susceptible to chemical attack. (2) The rate of membrane degradation can be greatly slowed or possibly eliminated through the use of additives that scavenge peroxide or peroxyl radicals. (3) Characterization of GDL using dry gases is incorrect due to the fact that fuel cells operate utilizing humidified gases. The proper characterization method involves using wet gas streams and measuring capillary pressure as demonstrated in this project. (4) Not all Platinum on carbon catalysts are created equally – the major factor impacting catalyst durability is the type of carbon used as the support. (5) System operating conditions have a significant impact of lifetime – the lifetime was increased by an order of magnitude by changing the load profile while all other variables remain

  10. Rock Slope Design Criteria : Executive Summary Report

    Science.gov (United States)

    2010-06-01

    Based on the stratigraphy and the type of slope stability problems, the flat lying, Paleozoic age, sedimentary rocks of Ohio were divided into three design units: 1) competent rock design unit consisting of sandstones, limestones, and siltstones that...

  11. Rock glaciers, Central Andes, Argentina, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — Primary rock glaciers are fed by avalanche chutes. At the El Salto rock glacier, surveys have been undertaken in order to determine the creep rate. Between 1981 and...

  12. Epigenetic alterations of sedimentary rocks at deposits

    International Nuclear Information System (INIS)

    Komarova, G.V.; Kondrat'eva, I.A.; Zelenova, O.I.

    1980-01-01

    Notions are explained, and technique for studying epigenetic alterations of sedimentary rocks at uranium deposits is described. Main types of epigenetic transformations and their mineralogic-geochemical characteristics are considered. Rock alterations, accompanying uranium mineralization, can be related to 2 types: oxidation and reduction. The main mineralogic-geochemical property of oxidation transformations is epigenetic limonitization. Stratal limonitization in primary grey-coloured terrigenic rocks and in epigenetically reduced (pyritized) rocks, as well as in rock, subjected to epigenetic gleying, are characterized. Reduction type of epigenetic transformations is subdivided into sulphidic and non-sulphidic (gley) subtypes. Sulphidic transformations in grey-coloured terrigenic rocks with organic substance of carbonic row, in rocks, containing organic substance of oil row, sulphide transformations of sedimentary rocks, as well as gley transformations, are considered

  13. Durability and Testing of Stone for use in Rubblemound structures

    DEFF Research Database (Denmark)

    Magoon, O.T.; Baird, W.F.; Ahrends, J.P.

    1993-01-01

    Rubblemound structures protected from wave action by a layer of quarried rock (stones) are the most common form of breakwaters. While extensive guidelines and procedures exist to select the size of stone there is very little information available on procedures to be followed to assure the quality...... of the in-place stone....

  14. Range sections as rock models for intensity rock scene segmentation

    CSIR Research Space (South Africa)

    Mkwelo, S

    2007-11-01

    Full Text Available can be drawn. • A methodology for rock-scene segmentation that com- bines intensity and range image analysis to reduce the effects of texture and color density variations is presented. • Post-processing in the form of outlier rejection... to the environment under imaging: poor lighting; color density and texture variations. Lighting conditions have been controlled through the elimination of natural lighting and proper design of syn- thetic lighting [3]. We present a methodology that avoids...

  15. Rock-degrading endophytic bacteria in cacti

    Science.gov (United States)

    M. Esther Puente; Ching Y. Li; Yoav Bashan

    2009-01-01

    A plant-bacterium association of the cardon cactus (Pachycereus pringlei) and endophytic bacteria promotes establishment of seedlings and growth on igneous rocks without soil. These bacteria weather several rock types and minerals, unbind significant amounts of useful minerals for plants from the rocks, fix in vitro N2. produce...

  16. The History of Rock Art Research

    Indian Academy of Sciences (India)

    The History of Rock Art Research. Rock art in South India was discovered as early as 1891.The earliest discovery of petroglyphs on the Koppagallu hill in Bellary district was made by Fred Fawcett (1892) who with the ... Fawcett, as Archibald Carlylle in Central India, recognized the prehistoric antiquity of the Rock art.

  17. Discharge-mechanical method of rock breakage

    Science.gov (United States)

    Vazhov, V. F.; Datskevich, S. Y.; Zhurkov, M. Y.; Muratov, V. M.; Jeffryes, B.

    2017-05-01

    The electric discharge and mechanical technology of hard rock breakage was developed on the ground of mechanical and electrical pulse methods and it was tested for purposes of deep drilling. It was demonstrated that, due to breakage of the rock surface by electric discharges, the rock excavation volume (breakage performance) is significantly improved as compared to conventional mechanical methods.

  18. The need for performance criteria in evaluating the durability of wood products

    Science.gov (United States)

    Stan Lebow; Bessie Woodward; Patricia Lebow; Carol Clausen

    2010-01-01

    Data generated from wood-product durability evaluations can be difficult to interpret. Standard methods used to evaluate the potential long-term durability of wood products often provide little guidance on interpretation of test results. Decisions on acceptable performance for standardization and code compliance are based on the judgment of reviewers or committees....

  19. The effects of moisture and temperature variations on the long term durability of polymer concrete

    DEFF Research Database (Denmark)

    Barbosa, Ricardo; Hansen, Kurt Kielsgaard; Grelk, Bent

    2013-01-01

    field where published data are scarce. Durability and constantly high and good physical properties are some of the most important properties of the materials used in the building industry. Thermal durability, i.e. the ability of a material to retain its original physical-mechanical properties during...... Publications, Switzerland....

  20. 76 FR 20822 - Proposed Information Collection (Living Will and Durable Power of Attorney for Health Care...

    Science.gov (United States)

    2011-04-13

    ... Will and Durable Power of Attorney for Health Care) Activity: Comment Request AGENCY: Veterans Health... instructions about health care decisions in the event he or she is no longer has decision-making capability... information technology. Title: VA Advance Directive: Living Will and Durable Power of Attorney for Health Care...

  1. The durability of waveguide fibers at cyclic change of loading, temperature and humidity

    International Nuclear Information System (INIS)

    Karimov, S.N.; Sultonov, U.; Shamsidinov, M.I.

    1992-01-01

    Present article is devoted to durability of waveguide fibers at cyclic change of loading, temperature and humidity. The mounting scheme and loading of sample is presented. The dependence of glass fiber durability on number of thermal cycles at various humidity rates was considered. The dependence of number of cycles on maximal loading at cyclic temperature change was studied.

  2. 40 CFR 86.1823-08 - Durability demonstration procedures for exhaust emissions.

    Science.gov (United States)

    2010-07-01

    ... control device. This procedure requires installation of the catalyst-plus-oxygen-sensor system on a... period of time calculated from the bench aging time (BAT) equation. The BAT equation requires, as input... procedure to future durability groups. The manufacturer may apply a durability procedure approved under...

  3. Durability of Dukovany shallow land repository engineered barriers. Appendix 7: Czech Republic

    International Nuclear Information System (INIS)

    Vokal, A.; Nachmilner, L.; Wasserbauer, R.; Dohnalek, J.

    2001-01-01

    The main aim of this project was to explore the durability of engineering barriers used at Dukovany shallow land repository as a support of safety assessments. This appendix summarises the principal results focused on durability of asphaltopropyleneconcrete (APC) hydroisolation and steel reinforced concrete construction

  4. Unusual 30-year durability of Hancock II porcine bioprosthesis in tricuspid position

    Directory of Open Access Journals (Sweden)

    Bachar El Oumeiri

    2015-01-01

    Conclusion: To our knowledge, this is the first report of a 30-year durability of tricuspid bioprosthesis in a young recipient. In the absence of extensive calcifications, pannus formation covering the whole prosthesis, peculiar hemodynamics and other unknown factors might have contributed to an extended durability in this young patient.

  5. Atteindre les objectifs de développement durable [ODD] liés à la ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    11 janv. 2018 ... Il est de plus en plus question des objectifs de développement durable (ODD) à mesure que les gouvernements nationaux intègrent le Programme de développement durable à l'horizon 2030 à leurs propres processus d'élaboration de politiques. La reconnaissance de la nature multisectorielle des ODD ...

  6. Fifty-Year Durability Evaluation of Posts Treated with Industrial Wood Preservatives

    Science.gov (United States)

    Stan T. Lebow; Patricia Lebow; Bessie Woodward; Grant T. Kirker; Rachel Arango

    2015-01-01

    Long-term durability data are needed to improve service life estimates for treated wood products used as critical structural supports in industrial applications. This article reports the durability of longleaf pine (Pinus palustris) posts pressure treated with ammoniacal copper arsenate (ACA), chromated copper arsenate (CCA), creosote, or...

  7. Performance and Durability of Solid Oxide Electrolysis Cells for Syngas Production

    DEFF Research Database (Denmark)

    Sun, Xiufu; Chen, Ming; Hjalmarsson, Per

    2012-01-01

    Performance and durability of Ni/YSZ based solid oxide electrolysis cells (SOECs) for co-electrolysis of H2O and CO2 at high current density were investigated. The cells consist of a Ni/YSZ support, a Ni/YSZ fuel electrode, a YSZ electrolyte, and a LSM-YSZ oxygen electrode. The cell durability wa...

  8. Moisture Sorption, Biological Durability, and Mechanical Performance of WPC Containing Modified Wood and Polylactates

    Science.gov (United States)

    B. Kristoffer Segerholm; Rebecca E. Ibach; Mats Westin

    2012-01-01

    Biological durability is an important feature for wood-plastic composites (WPC) intended for outdoor applications. One route to achieving WPC products with increased biological durability is to use wood preservative agents in the formulation of the WPC. Another option could be to use a chemically modified wood component that already exhibits increased resistance to...

  9. Adhesive groups and how they relate to the durability of bonded wood

    Science.gov (United States)

    Charles R. Frihart

    2009-01-01

    There is a need to develop models that evaluate the interaction of wood adhesives at the macroscopic level to explain observations on the durability of bonded wood laminate products with changing moisture conditions. This paper emphasizes a model that relates durability to strain on the bondline caused by wood swelling. The effect of this strain is discussed in...

  10. ESR dating of fault rocks

    International Nuclear Information System (INIS)

    Lee, Hee Kwon

    2002-03-01

    Past movement on faults can be dated by measurement of the intensity of ESR signals in quartz. These signals are reset by local lattice deformation and local frictional heating on grain contacts at the time of fault movement. The ESR signals then trow back as a result of bombardment by ionizing radiation from surrounding rocks. The age is obtained from the ratio of the equivalent dose, needed to produce the observed signal, to the dose rate. Fine grains are more completely reset during faulting, and a plot of age vs grain size shows a plateau for grains below critical size : these grains are presumed to have been completely zeroed by the last fault activity. We carried out ESR dating of fault rocks collected from the Yangsan fault system. ESR dates from the this fault system range from 870 to 240 ka. Results of this research suggest that long-term cyclic fault activity continued into the pleistocene

  11. Rock fracture grouting with microbially induced carbonate precipitation

    Science.gov (United States)

    Minto, James M.; MacLachlan, Erica; El Mountassir, Gráinne; Lunn, Rebecca J.

    2016-11-01

    Microbially induced carbonate precipitation has been proposed for soil stabilization, soil strengthening, and permeability reduction as an alternative to traditional cement and chemical grouts. In this paper, we evaluate the grouting of fine aperture rock fractures with calcium carbonate, precipitated through urea hydrolysis, by the bacteria Sporosarcina pasteurii. Calcium carbonate was precipitated within a small-scale and a near field-scale (3.1 m2) artificial fracture consisting of a rough rock lower surfaces and clear polycarbonate upper surfaces. The spatial distribution of the calcium carbonate precipitation was imaged using time-lapse photography and the influence on flow pathways revealed from tracer transport imaging. In the large-scale experiment, hydraulic aperture was reduced from 276 to 22 μm, corresponding to a transmissivity reduction of 1.71 × 10-5 to 8.75 × 10-9 m2/s, over a period of 12 days under constantly flowing conditions. With a modified injection strategy a similar three orders of magnitude reduction in transmissivity was achieved over a period of 3 days. Calcium carbonate precipitated over the entire artificial fracture with strong adhesion to both upper and lower surfaces and precipitation was controlled to prevent clogging of the injection well by manipulating the injection fluid velocity. These experiments demonstrate that microbially induced carbonate precipitation can successfully be used to grout a fracture under constantly flowing conditions and may be a viable alternative to cement based grouts when a high level of hydraulic sealing is required and chemical grouts when a more durable grout is required.

  12. Applying rock mass classifications to carbonate rocks for engineering purposes with a new approach using the rock engineering system

    Directory of Open Access Journals (Sweden)

    Gioacchino Francesco Andriani

    2017-04-01

    Full Text Available Classical rock mass classification systems are not applicable to carbonate rocks, especially when these are affected by karst processes. Their applications to such settings could therefore result in outcomes not representative of the real stress–strain behavior. In this study, we propose a new classification of carbonate rock masses for engineering purposes, by adapting the rock engineering system (RES method by Hudson for fractured and karstified rock masses, in order to highlight the problems of implementation of geomechanical models to carbonate rocks. This new approach allows a less rigid classification for carbonate rock masses, taking into account the local properties of the outcrops, the site conditions and the type of engineering work as well.

  13. Uranium deposits in volcanic rocks

    International Nuclear Information System (INIS)

    1985-01-01

    Twenty-eight papers were presented at the meeting and two additional papers were provided. Three panels were organized to consider the specific aspects of the genesis of uranium deposits in volcanic rocks, recognition criteria for the characterization of such deposits, and approaches to exploration. The papers presented and the findings of the panels are included in the Proceedings. Separate abstracts were prepared for each of these papers

  14. ESR dating of fault rocks

    International Nuclear Information System (INIS)

    Lee, Hee Kwon

    2003-02-01

    Past movement on faults can be dated by measurement of the intensity of ESR signals in quartz. These signals are reset by local lattice deformation and local frictional heating on grain contacts at the time of fault movement. The ESR signals then grow back as a result of bombardment by ionizing radiation from surrounding rocks. The age is obtained from the ratio of the equivalent dose, needed to produce the observed signal, to the dose rate. Fine grains are more completely reset during faulting, and a plot of age vs. grain size shows a plateau for grains below critical size; these grains are presumed to have been completely zeroed by the last fault activity. We carried out ESR dating of fault rocks collected near the Gori nuclear reactor. Most of the ESR signals of fault rocks collected from the basement are saturated. This indicates that the last movement of the faults had occurred before the Quaternary period. However, ESR dates from the Oyong fault zone range from 370 to 310 ka. Results of this research suggest that long-term cyclic fault activity of the Oyong fault zone continued into the Pleistocene

  15. Source rock hydrocarbons. Present status

    International Nuclear Information System (INIS)

    Vially, R.; Maisonnier, G.; Rouaud, T.

    2013-01-01

    This report first presents the characteristics of conventional oil and gas system, and the classification of liquid and gaseous non conventional hydrocarbons, with the peculiar case of coal-bed methane. The authors then describe how source rock hydrocarbons are produced: production of shale oils and gases (horizontal drilling, hydraulic fracturing, exploitation) and of coal-bed methane and coal mine methane. In the next part, they address and discuss the environmental impact of source rock hydrocarbon production: installation footprint, water resource management, drilling fluids, fracturing fluids composition, toxicity and recycling, air pollution, induced seismicity, pollutions from other exploitation and production activities. They propose an overview of the exploitation and production of source rock gas, coal-bed gas and other non conventional gases in the world. They describe the current development and discuss their economic impacts: world oil context and trends in the USA, in Canada and other countries, impacts on the North American market, on the world oil industry, on refining industries, on the world oil balance. They analyse the economic impacts of non conventional gases: development potential, stakes for the world gas trade, consequence for gas prices, development opportunities for oil companies and for the transport sector, impact on CO 2 emissions, macro-economic impact in the case of the USA

  16. The impact of mechanical properties of rock to the collision of rock piece

    Directory of Open Access Journals (Sweden)

    Borut Macuh

    2007-06-01

    Full Text Available The paper presents the analytical solution of the rock piece motion considering influences of geometrical and mechanical characteristics of rock mass on the arbitrary slope. The main objective of the paper is to determine the motion of the rock piece considering possibility of rock piece failure due to collision. Brief description of the analytical solution of the rock piece motion on a steep slope is given. The laboratory tests were performed to determine uniaxial compressive strength and elastic properties of the considered rock mass. Further, velocities that cause rock piece failure were determined. These maximum velocities indirectly belong to certain mass of rock piece and can be lower than velocities calculated in rock-fall analysis for certain slope geometry. Consequently, the energy magnitude is limited, because at certain velocity and mass of rock piece bigger pieces crash at collision.

  17. Performance and durability of solid oxide electrolysis cells

    DEFF Research Database (Denmark)

    Hauch, Anne; Jensen, Søren H; Ramousse, Severine

    2006-01-01

    Solid oxide fuel cells produced at Riso National Laboratory have been tested as electrolysis cells by applying an external voltage. Results on initial performance and durability of such reversible solid oxide cells at temperatures from 750 to 950 degrees C and current densities from -0.25 A/cm(2......) to -0.50 A/cm(2) are reported. The full cells have an initial area specific resistance as low as 0.27 Omega cm(2) for electrolysis operation at 850 degrees C. During galvanostatic long-term electrolysis tests, the cells were observed to passivate mainly during the first similar to 100 h of electrolysis....... Cells that have been passivated during electrolysis tests can be partly activated again by operation in fuel cell mode or even at constant electrolysis conditions after several hundred hours of testing....

  18. Durability of Mortar Made with Fine Glass Powdered Particles

    Directory of Open Access Journals (Sweden)

    Rosemary Bom Conselho Sales

    2017-01-01

    Full Text Available Different studies investigate the use of waste glass in Portland cement compounds, either as aggregates or as supplementary cementitious materials. Nevertheless, it seems that there is no consensus about the influence of particle color and size on the behavior of the compounds. This study addresses the influence of cement replacement by 10 and 20% of the colorless and amber soda-lime glass particles sized around 9.5 μm on the performance of Portland cement mortars. Results revealed that the partial replacement of cement could contribute to the production of durable mortars in relation to the inhibition of the alkali-aggregate reaction. This effect was more marked with 20% replacement using amber glass. Samples containing glass microparticles were more resistant to corrosion, in particular those made of colorless glass. The use of colorless and amber glass microparticles promoted a reduction in wear resistance.

  19. A relational approach to durable poverty, inequality and power.

    Science.gov (United States)

    Mosse, David

    2010-01-01

    The article argues for what can be called a 'relational' approach to poverty: one that first views persistent poverty as the consequence of historically developed economic and political relations, and second, that emphasises poverty and inequality as an effect of social categorisation and identity, drawing in particular on the experience of adivasis ("tribals") and dalits ("untouchables") subordinated in Indian society. The approach follows Charles Tilly's Durable Inequality in combining Marxian ideas of exploitation and dispossession with Weberian notions of social closure. The article then draws on the work of Steven Lukes, Pierre Bourdieu and Arjun Appadurai to argue for the need to incorporate a multidimensional conception of power; including not only power as the direct assertion of will but also 'agenda-setting power' that sets the terms in which poverty becomes (or fails to become) politicised, and closely related to power as political representation. This sets the basis for discussion of the politics of poverty and exclusion.

  20. Durability Tests of Ball Valve Prototype with Flowmeter Operation

    Science.gov (United States)

    Rogula, J.; Romanik, G.

    2018-02-01

    The results of the investigation of the prototypical ball valve are presented in this article. The innovation of the tested valve is a ball with a built-in measuring orifice. The valve has been subjected to durability tests. Leakage under three temperatures: ambient, -30°C and +100°C was analyzed. Sealing elements of the valve were tested for roughness and deviation of shape before and after the cycles of operation. Ball valve operation means cycles of open/close. It was planned to perform 1000 cycles at each temperature condition accordingly. Tests of the valve were performed under gas pressure equal to 10 MPa. The research was carried out under the Operational Program "Intelligent Development" (POIR 01.01.01-00-0013 / 15 "Development of devices for measurement of media flow on industrial trunk-lines".

  1. Durable Feedback Control System for Small Scale Wood Chip Combustion

    Energy Technology Data Exchange (ETDEWEB)

    Korpela, T.; Bjoerkqvist, T.; Lautala, P. (Tampere Univ. of Technology, Dept. of Automation Science and Engineering, FIN-33101 Tampere (Finland)). E-mail: timo.korpela@tut.fi

    2008-10-15

    The purpose is to control wood chip combustion in an inexpensive and durable way. A control concept in order to reduce the effect of fluctuation of the fuel feed is introduced. The concept is based on temperature and lambda measurements. The main task of the control system is to set the fuel feed at a desired level after a change in the combustion conditions. Additionally, temporary fluctuations of the degree of filling of feeding screw are compensated. Test results of a 80 kW and a 200 kW commercial wood chip fired systems are introduced. The process experiments indicate that the high level control system is able to adapt to varying combustion conditions and to maintain low emission levels. Furthermore, passive means that can be exploited to stabilize the combustion are discussed. As the control concept is not dependent on the design of the combustion system, the concept is adaptable to present systems

  2. Durability of Modified Expanded Polystyrene Concrete after Dynamic Cyclic Loading

    Directory of Open Access Journals (Sweden)

    Wenbo Shi

    2016-01-01

    Full Text Available EPS concrete was produced by mixing the expanded polystyrene spheres (EPS and polymer emulsion and thickener to the matrix concrete, and this concrete had good vibration energy absorption characteristics. Based on the experimental data obtained on EPS volume ratio of 0%, 20%, 30%, and 40% by replacing matrix or coarse aggregate, the two design styles had nearly the same compressive strength. By applying frequency of 5 Hz, 50000 or 100000 times, 40 KN, 50 KN, and 60 KN cyclic loading, it is shown that the higher the inclusion size was, the lower the compressive strength of the EPS concrete would be; the larger the applying dynamic cyclic load was, the more obvious the compressive strength changing would be. Meanwhile, the strength of EPS concrete had no evident change after durability test. The results of this research had practical significance on using EPS concrete in some long-term cyclic dynamic load engineering.

  3. Highly durable direct hydrazine hydrate anion exchange membrane fuel cell

    Science.gov (United States)

    Sakamoto, Tomokazu; Serov, Alexey; Masuda, Teruyuki; Kamakura, Masaki; Yoshimoto, Koji; Omata, Takuya; Kishi, Hirofumi; Yamaguchi, Susumu; Hori, Akihiro; Horiuchi, Yousuke; Terada, Tomoaki; Artyushkova, Kateryna; Atanassov, Plamen; Tanaka, Hirohisa

    2018-01-01

    The factors influenced on degradation of direct hydrazine hydrate fuel cells (DHFCs) under operation conditions are analyzed by in situ soft X-ray radiography. A durability of DHFCs is significantly improved by multi-step reaction DHFCs (MSR-DHFCs) approach designed to decrease the crossover of liquid fuel. An open circuit voltage (OCV) as well as cell voltage at 5 mA cm-2 of MSR-DHFC construct with commercial anion exchange membrane (AEM) maintained for over of 3500 h at 60 °C. Furthermore, the commercial proton exchange membrane (PEM) is integrated into AEM of MSR-DHFCs resulting in stable power output of MSR-DHFCs for over than 2800 h at 80 °C.

  4. Durability of Cement Composites Reinforced with Sisal Fiber

    Science.gov (United States)

    Wei, Jianqiang

    This dissertation focuses mainly on investigating the aging mechanisms and degradation kinetics of sisal fiber, as well as the approaches to mitigate its degradation in the matrix of cement composites. In contrast to previous works reported in the literature, a novel approach is proposed in this study to directly determine the fiber's degradation rate by separately studying the composition changes, mechanical and physical properties of the embedded sisal fibers. Cement hydration is presented to be a crucial factor in understanding fiber degradation behavior. The degradation mechanisms of natural fiber consist of mineralization of cell walls, alkali hydrolysis of lignin and hemicellulose, as well as the cellulose decomposition which includes stripping of cellulose microfibrils and alkaline hydrolysis of amorphous regions in cellulose chains. Two mineralization mechanisms, CH-mineralization and self-mineralization, are proposed. The degradation kinetics of sisal fiber in the cement matrix are also analyzed and a model to predict the degradation rate of cellulose for natural fiber embedded in cement is outlined. The results indicate that the time needed to completely degrade the cellulose in the matrix with cement replacement by 30wt.% metakaolin is 13 times longer than that in pure cement. A novel and scientific method is presented to determine accelerated aging conditions, and to evaluating sisal fiber's degradation rate and durability of natural fiber-reinforced cement composites. Among the static aggressive environments, the most effective approach for accelerating the degradation of natural fiber in cement composites is to soak the samples or change the humidity at 70 °C and higher temperature. However, the dynamic wetting and drying cycling treatment has a more accelerating effect on the alkali hydrolysis of fiber's amorphous components evidenced by the highest crystallinity indices, minimum content of holocellulose, and lowest tensile strength. Based on the

  5. Some Durability Aspects of Ambient Cured Bottom Ash Geopolymer Concrete

    Directory of Open Access Journals (Sweden)

    Saravanakumar R.

    2017-09-01

    Full Text Available The present study examines some durability aspects of ambient cured bottom ash geopolymer concrete (BA GPC due to accelerated corrosion, sorptivity, and water absorption. The bottom ash geopolymer concrete was prepared with sodium based alkaline activators under ambient curing temperatures. The sodium hydroxide used concentration was 8M. The performance of BA GPC was compared with conventional concrete. The test results indicate that BA GPC developes a strong passive layer against chloride ion diffusion and provides better protection against corrosion. Both the initial and final rates of water absorption of BA GPC were about two times less than those of conventional concrete. The BA GPC significantly enhanced performance over equivalent grade conventional concrete (CC.

  6. Carbonation-Related Microstructural Changesin Long-Term Durability Concrete

    Directory of Open Access Journals (Sweden)

    Cláudio A. Rigo da Silva

    2002-09-01

    Full Text Available This paper discusses the effects of carbonation on the microstructure of Portland cement concrete for long-term durability applications. A class C40 concrete (characteristic compression strength between 40 MPa and 44 MPa on the 28th day, according to Brazilian standard NBR 8953 was chosen for the experimental study of the carbonation effects, from which test samples were molded for accelerated test under a 100%-CO2 atmosphere after physical and mechanical characterization. It was observed that carbonation provoked a reduction of 5% to 12% of the concrete open porosity accessible to water. Flexural strength values obtained after the carbonation tests revealed a decrease of 12% and 25% in relation to the values obtained before tests on the 28th and 91st days, respectively.

  7. Quantify and improve PEM fuel cell durability. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Grahl-Madsen, L.; Odgaard, M.; Munksgaard Nielsen, R. (IRD Fuel Cell A/S, Svendborg (Denmark)); Li, Q.; Jensen, Jens Oluf (Technical Univ. of Denmark, Dept. of Chemistry, Kgs. Lyngby (Denmark)); Andersen, Shuang Ma; Speder, J.; Skou, E. (Syddansk Univ. (SDU), Odense (Denmark))

    2010-07-01

    The aim of the present project is to systematically quantify and improve the durability of the PEM FC including the following three PEM FC variants: LT PEM FC, DMFC, and HT PEM FC. Different factors influencing dissolution properties of noble metal catalyst platinum and platinum-ruthenium alloy has been studied. The dissolution was found to increase by increasing the CV cycle upper potential limit, number of potential cycles, solution acidity, oxygen partial pressure, involvement of chloride, and temperature. Ruthenium was found to deteriorate ten (10) times faster than platinum catalyst; and carbon supported catalyst (Pt: 20%, Ru: up to 100%) deteriorate ten (10) times faster than non-supported catalyst (Pt: 2%, Ru: 30%) at the same condition. Loss of sulphonic acid groups and fluoride from perfluorinated sulfonic acid membrane was confirmed by different techniques, which locally leads to loss of acidity, and consequently enhances dissolution of noble metal catalyst. Degradation of Nafion ionomer in the electrode was enhanced by noble metal catalyst and the thermal decomposition properties has synergetic effect with carbon degradation. Hydrophobicity of GDL and electrode on GDL were found to degrade e.g. radical attack, oxidation, and physical wear out. The very top micro surface structure turned out to be responsible for wetting property after chemical ageing. Optimal catalyst and ionomer ratio is also reflected in contact angle value, which can be understood in terms of catalyst/carbon - ionomer affinity and layered structure. Long-term tested and 'virgin' LT PEM MEAs have been characterised with respect to SEM, TEM, EDS, and XRD. Both failed and well-functioning MEAs have been characterised. The Post Mortem analysis has shown and quantified degradation mechanisms like catalyst growth and carbon corrosion. Furthermore, the effect of fuel starvation was shown by pronounced Ru-catalyst band within the membrane. The catalyst coarsening observed after

  8. Durability of commercial aircraft and helicopter composite structures

    International Nuclear Information System (INIS)

    Dexter, H.B.

    1982-01-01

    The development of advanced composite technology during the past decade is discussed. Both secondary and primary components fabricated with boron, graphite, and Kevlar composites are evaluated. Included are spoilers, rudders, and fairings on commercial transports, boron/epoxy reinforced wing structure on C-130 military transports, and doors, fairings, tail rotors, vertical fins, and horizontal stabilizers on commercial helicopters. The development of composite structures resulted in advances in design and manufacturing technology for secondary and primary composite structures for commercial transports. Design concepts and inspection and maintenance results for the components in service are reported. The flight, outdoor ground, and controlled laboratory environmental effects on composites were also determined. Effects of moisture absorption, ultraviolet radiation, aircraft fuels and fluids, and sustained tensile stress are included. Critical parameters affecting the long term durability of composite materials are identified

  9. Durability and Performance of High Performance Infiltration Cathodes

    DEFF Research Database (Denmark)

    Samson, Alfred Junio; Søgaard, Martin; Hjalmarsson, Per

    2013-01-01

    The performance and durability of solid oxide fuel cell (SOFC) cathodes consisting of a porous Ce0.9Gd0.1O1.95 (CGO) infiltrated with nitrates corresponding to the nominal compositions La0.6Sr0.4Co1.05O3-δ (LSC), LaCoO3-δ (LC), and Co3O4 are discussed. At 600°C, the polarization resistance, Rp......, varied as: LSC (0.062Ωcm2)originate...... of the infiltrate but also from a better surface exchange property. A 450h test of an LSC-infiltrated CGO cathode showed an Rp with final degradation rate of only 11mΩcm2kh-1. An SOFC with an LSC-infiltrated CGO cathode tested for 1,500h at 700°C and 0.5Acm-2 (60% fuel, 20% air utilization) revealed no measurable...

  10. Durability of Materials in Pearl-Chain Bridges

    DEFF Research Database (Denmark)

    Lund, Mia Schou Møller

    This PhD thesis contributes to documentation regarding durability of materials used in so-called “Pearl-Chain Bridges”. The Pearl-Chain Bridge technology is a new precast bridge solution developed at the Technical University of Denmark. The technology reintroduces the arch structure...... as an economical beneficial solution primarily for road and railway bridges, and allows for the faster, more environmentally friendly, and cheaper construction of such bridges. A Pearl-Chain Bridge consists of two main parts: the load-carrying Pearl-Chain arch, and the fill material on top of the arch....... The construction of the Pearl-Chain arch is simple. The arch is assembled on its side, next to the road that the bridge will span, by placing a number of plane prefabricated Super-Light Decks that consist of lightweight aggregate concrete and conventional concrete, in the desired arch shape. Mortar joints are cast...

  11. The durability of beneficial health effects associated with expressive writing

    Science.gov (United States)

    Sloan, Denise M.; Feinstein, Brian A.; Marx, Brian P.

    2016-01-01

    This study examined the durability of benefits associated with expressive writing. Sixty-eight college undergraduates completed measures of physical and psychological health at the beginning of their first year and were then randomized to either an expressive writing or a control writing condition. Changes in physical health, psychological health (i.e., depression, stress, and anxiety), and academic performance were assessed two, four, and six months later. Findings indicated that participants assigned to the expressive writing condition reported less depression symptom severity at the two-month follow-up assessment relative to participants assigned to the control condition. However, these symptom reductions were not observed at any of the subsequent follow-up assessments. No significant changes were reported for physical health complaints, stress symptoms, anxiety symptoms, or academic performance. These findings suggest that, among first-year college students, expressive writing may provide some short-term relief for certain symptoms. PMID:19333797

  12. Quartier durable ou éco-quartier ?

    Directory of Open Access Journals (Sweden)

    Benoît Boutaud

    2009-09-01

    Full Text Available Le terme d’éco-quartier est aujourd’hui largement utilisé par les professionnels de l’urbanisme comme par la presse et se trouve souvent utilisé comme synonyme de quartier durable. Tous deux désigneraient ces projets d’urbanisme ayant des objectifs environnementaux, sociaux et économiques ambitieux qui se multiplient en France depuis quelques années. Toutefois, dans la pratique, cette synonymie est loin de faire l’unanimité. Sont-ce des quartiers durables, des éco-quartiers ou les deux ? C’est sur cette question de vocabulaire que cet article souhaite se pencher alors même que l’objet qu’ils sont sensés décrire reste lui-même encore à définir précisément. Ceci en axant particulièrement cette interrogation sur la pertinence de l’utilisation de l’expression d’éco-quartier pour désigner ces nouveaux morceaux de ville créés dans un nouveau contexte de réflexion environnementale et humaine. Nous partirons pour cela des diverses utilisations qui en sont faites en tenant compte du contexte matériel, théorique et temporel, dans lequel ces nouveaux éléments de l’urbanisme s’insèrent. Nous verrons également que l’utilisation qui en est faite résonne au delà d’une simple question sémantique.

  13. Moisture Durability Assessment of Selected Well-insulated Wall Assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Pallin, Simon B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Boudreaux, Philip R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kehrer, Manfred [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hun, Diana E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jackson, Roderick K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Desjarlais, Andre Omer [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-12-01

    This report presents the results from studying the hygrothermal performance of two well-insulated wall assemblies, both complying with and exceeding international building codes (IECC 2015 2014, IRC 2015). The hygrothermal performance of walls is affected by a large number of influential parameters (e.g., outdoor and indoor climates, workmanship, material properties). This study was based on a probabilistic risk assessment in which a number of these influential parameters were simulated with their natural variability. The purpose of this approach was to generate simulation results based on laboratory chamber measurements that represent a variety of performances and thus better mimic realistic conditions. In total, laboratory measurements and 6,000 simulations were completed for five different US climate zones. A mold growth indicator (MGI) was used to estimate the risk of mold which potentially can cause moisture durability problems in the selected wall assemblies. Analyzing the possible impact on the indoor climate due to mold was not part of this study. The following conclusions can be reached from analyzing the simulation results. In a hot-humid climate, a higher R-value increases the importance of the airtightness because interior wall materials are at lower temperatures. In a cold climate, indoor humidity levels increase with increased airtightness. Air leakage must be considered in a hygrothermal risk assessment, since air efficiently brings moisture into buildings from either the interior or exterior environment. The sensitivity analysis of this study identifies mitigation strategies. Again, it is important to remark that MGI is an indicator of mold, not an indicator of indoor air quality and that mold is the most conservative indicator for moisture durability issues.

  14. A Review on the British Rock Music

    OpenAIRE

    Hutapea, Alfian Hadi Pranata

    2011-01-01

    Music has an important role in people’s life. In people’s daily, music is often hearing of course and in people’s customs and traditions music is also be used. Music has many genres, one of them is rock music. Many people like rock music especially youngman because rock music has given a message in a song through enthusiasm expression. Rock music has many subgenres and each of subgenres have a distinctive feature. The developing of rock music is very wide in the world, especially in Great Bri...

  15. The physical principles of rock magnetism

    CERN Document Server

    Stacey, Frank

    1974-01-01

    Developments in Solid Earth Geophysics 5: The Physical Principles of Rock Magnetism explores the physical principles of rock magnetism, with emphasis on the properties of finely divided magnetic materials. It discusses the origin and stability of rock magnetizations, the role of remanent magnetism in interpreting magnetic surveys, magnetic anisotropy as an indicator of rock fabric, and the relationship between piezomagnetic changes and seismic activity. Organized into 13 chapters, this volume discusses the properties of solids, magnetite and hematite grains, and rocks with magnetite grains

  16. Carbonate rock depositional models: A microfacies approach

    Energy Technology Data Exchange (ETDEWEB)

    Carozzi, A.V.

    1988-01-01

    Carbonate rocks contain more than 50% by weight carbonate minerals such as calcite, dolomite, and siderite. Understanding how these rocks form can lead to more efficient methods of petroleum exploration. Micofacies analysis techniques can be used as a method of predicting models of sedimentation for carbonate rocks. Micofacies in carbonate rocks can be seen clearly only in thin sections under a microscope. This section analysis of carbonate rocks is a tool that can be used to understand depositional environments, diagenetic evolution of carbonate rocks, and the formation of porosity and permeability in carbonate rocks. The use of micofacies analysis techniques is applied to understanding the origin and formation of carbonate ramps, carbonate platforms, and carbonate slopes and basins. This book will be of interest to students and professionals concerned with the disciplines of sedimentary petrology, sedimentology, petroleum geology, and palentology.

  17. USING ELASTIC WAVE VELOCITY ON CLASSIFICATION WEATHERING ROCK MATERIALS AND PREDICTION OF ENGINEERING PROPERTIES IN KURTUN GRANODIORITE

    Directory of Open Access Journals (Sweden)

    Şener CERYAN

    2007-02-01

    Full Text Available A great number of landslides occurred in weathered granites outcropped the area in which Kurtun Dams with reservoirs and Gümüshane-Giresun highways pass trough. For this, weathering effect on the rock materials of the Kurtun granodiorite was investigated. In this study, both physical and mineralogical changes on the granitic materials due to weathering are described separately using P- wave velocity in rocks materials. Mineralogical Change Parameter and Physical Parameter defined based on P- wave velocity in rocks materials are applied on the samples from the selected weathering profiles, for the estimation of the effects of weathering on the physicomechanical properties of rock materials. The relative variation of mechanical properties and these indices display a statistically significant correlation. Besides, it is shown that P wave velocity in the solid parts of the samples. and Quantitative Weathering index originally defined Ceryan (1999a as based on slake-durability index, Mineralogical Change Parameter and Physical Parameter can be used together to evaluate the effect of weathering on the mechanical behavior of rocks material from Kürtün granodiorite.

  18. Durability and service life design of concrete structures. Experiences and the way to prove in The Netherlands

    NARCIS (Netherlands)

    Siemes, A.J.M.; Vrouwenvelder, A.C.W.M.

    2002-01-01

    After the introduction of reinforced concrete it was believed that the material was extremely durable. Soon it was found however, that reinforced concrete could have serious durability problems and that special care should be taken to avoid them. Durability became an issue.

  19. Characterization and testing of rock aggregates of the Santa Marta Batholith, (Colombia

    Directory of Open Access Journals (Sweden)

    Nancy Paola Figueroa Madero

    2014-12-01

    Full Text Available Aggregates of intrusive rocks are the major source of crushed fine and coarse aggregates for use in concrete in several countries and they have to meet a number of specifications relating to strength and durability. This research reports the evaluation of aggregates of granitoids and associated rocks of Santa Marta Batholith, Sierra Nevada de Santa Marta Massif, Colombia, based on petrographic analysis and mechanical and chemical acceptance tests. The strength and durability of a particular rock type depends on its intrinsic characteristic, thus petrographic analysis is very important to understand its mechanical and chemical properties. Numerous standard tests used to ensure aggregates meet the appropriate specifications; however, petrographic analysis represents the most valuable test for predicting the overall performance of concrete aggregates in any control test. Aggregates were analyzed to determine their petrographic, physical, mechanical and chemical properties. Samples were categorized as hornblendite, gabbro, quartzmonzodiorite, monzodiorite and monzonite groups. Among these, of the quartzmonzodiorite was the dominant group. Specific gravity indicates values in the range 2673-2956kg/m3. Water absorption values are in the range 0.908-1.194%. Aggregate impact values of samples (37.82 to 61.36% showed good soundness only for one of the aggregates, which are considered acceptable for use in the preparation of a good quality concrete. Values of Methylene Blue Adsorption reveal the organic matter content is below the threshold. Magnesium sulphate values ranged between 0.11 and 4.75% suggesting good resistance against chemical atmospheric agents. The compressive strength test shows values in the range 35.22-59.45MPa indicating that the geomechanical behavior of rock cylinders is satisfactory. The geomechanical behavior of rock tablets under flexion is also satisfactory for SMA-2 sample (16.53MPa, although not for SMA-6 and SMA-8 samples

  20. Hot Dry Rock; Geothermal Energy

    Energy Technology Data Exchange (ETDEWEB)

    None

    1990-01-01

    The commercial utilization of geothermal energy forms the basis of the largest renewable energy industry in the world. More than 5000 Mw of electrical power are currently in production from approximately 210 plants and 10 000 Mw thermal are used in direct use processes. The majority of these systems are located in the well defined geothermal generally associated with crustal plate boundaries or hot spots. The essential requirements of high subsurface temperature with huge volumes of exploitable fluids, coupled to environmental and market factors, limit the choice of suitable sites significantly. The Hot Dry Rock (HDR) concept at any depth originally offered a dream of unlimited expansion for the geothermal industry by relaxing the location constraints by drilling deep enough to reach adequate temperatures. Now, after 20 years intensive work by international teams and expenditures of more than $250 million, it is vital to review the position of HDR in relation to the established geothermal industry. The HDR resource is merely a body of rock at elevated temperatures with insufficient fluids in place to enable the heat to be extracted without the need for injection wells. All of the major field experiments in HDR have shown that the natural fracture systems form the heat transfer surfaces and that it is these fractures that must be for geothermal systems producing from naturally fractured formations provide a basis for directing the forthcoming but, equally, they require accepting significant location constraints on HDR for the time being. This paper presents a model HDR system designed for commercial operations in the UK and uses production data from hydrothermal systems in Japan and the USA to demonstrate the reservoir performance requirements for viable operations. It is shown that these characteristics are not likely to be achieved in host rocks without stimulation processes. However, the long term goal of artificial geothermal systems developed by systematic