WorldWideScience

Sample records for specific energy-conservation programs

  1. Foreign energy conservation integrated programs

    International Nuclear Information System (INIS)

    Lisboa, Maria Luiza Viana; Bajay, Sergio Valdir

    1999-01-01

    The promotion of energy economy and efficiency is recognized as the single most cost-effective and least controversial component of any strategy of matching energy demand and supply with resource and environmental constraints. Historically such efficiency gains are not out of reach for the industrialized market economy countries, but are unlikely to be reached under present conditions by developing countries and economics in transition. The aim of the work was to analyze the main characteristics of United Kingdom, France, Japan, Canada, Australia and Denmark energy conservation integrated programs

  2. 77 FR 59712 - Energy Conservation Program: Energy Conservation Standards for Dishwashers

    Science.gov (United States)

    2012-10-01

    ... amended energy conservation standards, DOE conducted a market survey using all available public... Energy Conservation Program: Energy Conservation Standards for Dishwashers AGENCY: Office of Energy... establish amended energy conservation standards for dishwashers in the Federal Register on May 30, 2012. DOE...

  3. 78 FR 73589 - Energy Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric...

    Science.gov (United States)

    2013-12-06

    ... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors; Proposed... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors AGENCY... proposes energy conservation standards for a number of different groups of electric motors that DOE has not...

  4. Annotated directory of energy conservation programs

    Energy Technology Data Exchange (ETDEWEB)

    Claxton, J.D.; McDougall, G.H.G.; Ritchie, J.R.B. (eds.)

    1980-01-01

    Summaries of 34 consumer energy conservation programs in Canada and the USA are listed. Areas of focus are: (1) home heating and cooling; (2) household appliances; (3) private transportation; and (4) community involvement. Each summary contains information on the program objectives, operating details, results to date, costs and benefits, and source of funding. The key contact person is identified and background literature references are given. ((MJJ)

  5. 78 FR 51463 - Energy Conservation Program: Energy Conservation Standards for Metal Halide Lamp Fixtures

    Science.gov (United States)

    2013-08-20

    ... merging the metal halide lamp fixture and the high-intensity discharge (HID) lamp rulemakings. This NOPR... Conservation Program: Energy Conservation Standards for Metal Halide Lamp Fixtures; Proposed Rule #0;#0;Federal...: Energy Conservation Standards for Metal Halide Lamp Fixtures AGENCY: Office of Energy Efficiency and...

  6. 75 FR 17036 - Energy Conservation Program: Energy Conservation Standards for Small Electric Motors; Correction

    Science.gov (United States)

    2010-04-05

    ... Conservation Program: Energy Conservation Standards for Small Electric Motors; Correction AGENCY: Office of... standards for small electric motors, which was published on March 9, 2010. In that final rule, the U.S... titled ``Energy Conservation Standards for Small Electric Motors.'' 75 FR 10874. Since the publication of...

  7. 75 FR 20111 - Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct...

    Science.gov (United States)

    2010-04-16

    ... Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool... heating equipment and pool heaters. Table I.1--Amended Energy Conservation Standards for Residential Water... for national energy and water conservation; and 7. Other factors the Secretary of Energy (Secretary...

  8. 75 FR 21981 - Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct...

    Science.gov (United States)

    2010-04-27

    ... DEPARTMENT OF ENERGY 10 CFR Part 430 [Docket Number EE-2006-BT-STD-0129] RIN 1904-AA90 Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool Heaters Correction In rule document 2010-7611 beginning on page 20112 in the issue of Friday...

  9. 78 FR 20842 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2013-04-08

    ... DeLonghi); energy and environmental advocates (American Council for an Energy Efficient Economy (ACEEE... DEPARTMENT OF ENERGY 10 CFR Part 430 [Docket Number EERE-2013-BT-STD-0020] RIN 1904-AC98 Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and Room Air Conditioners...

  10. 76 FR 70547 - Energy Conservation Program: Energy Conservation Standards for Fluorescent Lamp Ballasts

    Science.gov (United States)

    2011-11-14

    ... the term ``fluorescent lamp,'' which EPCA defines as ``a low pressure mercury electric-discharge... discharge into light,'' and as including the four enumerated types of fluorescent lamps for which EPCA... Conservation Program: Energy Conservation Standards for Fluorescent Lamp Ballasts; Final Rule #0;#0;Federal...

  11. 77 FR 10997 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers; Correction

    Science.gov (United States)

    2012-02-24

    ... Conservation Program: Energy Conservation Standards for Distribution Transformers; Correction AGENCY: Office of... standards for distribution transformers. It was recently discovered that values in certain tables of the...,'' including distribution transformers. The Energy Policy Act of 1992 (EPACT 1992), Public Law 102-486, amended...

  12. 78 FR 25626 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Ceiling Fans...

    Science.gov (United States)

    2013-05-02

    ... Conservation Program for Consumer Products: Energy Conservation Standards for Ceiling Fans and Ceiling Fan... for residential ceiling fans and ceiling fan light kits in the Federal Register. This document... other aspect of the rulemaking for ceiling fans and ceiling fan light kits. The comment period is...

  13. Training program for energy conservation in new building construction. Volume III. Energy conservation technology for plan examiners and code administrators. Energy Conservation Technology Series 200

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    Under the sponsorship of the United States Department of Energy, a Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. The subject of regulation of new building construction to assure energy conservation is recognized as one in which code officials have not had previous exposure. It was also determined that application of the model code would be made at varying levels by officials with both a specific requirement for knowledge and a differing degree of prior training in the state-of-the-art. Therefore, a training program and instructional materials were developed for code officials to assist them in the implementation and enforcement of energy efficient standards and codes. The training program for Energy Conservation Tehnology for Plan Examiners and Code Administrators (ECT Series 200) is presented.

  14. Jersey City energy conservation demonstration program. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Newbold, R.F.

    1978-08-01

    The Aerospace Corporation, the City Government, and the Board of Education of Jersey City have conducted a group of energy-conservation experiments to explore a number of conservation techniques believed to offer quick payback and to be of wide applicability. Experiments include the updating and/or rehabilitation of the energy-consuming features of old buildings and installation of devices designed to minimize energy losses caused by human error or laxity. Specific examples include: upgrading of the deteriorated and inefficient steam-distribution system of the city hall (originally constructed in 1894); an extensive program of reducing infiltration in an old school building; use of several timing devices in connection with heating, ventilation, and lighting systems to encourage energy-conservation practices; retrofit of school classrooms with high-pressure sodium lamps; and demonstration of practical and cost-effective ways of increasing the efficiency of conventional steam boilers. The report presents: the nature of the selected experiments; technical, human, and organizational factors that proved significant in performing and evaluating the experiments; discussions of observations and lessons learned; and general recommendations for an extended program of energy conservation in local governments. It is emphasized that, in retrofit of existing buildings, the unexpected is commonplace; and the habits and attitudes of building occupants are elements of the system that must always be taken into account. This report shows the benefits of energy saving, cost saving, and added comfort that may be attained by retrofitting old buildings, noting typical complications that arise. The effectiveness of the conservation methods is presented in terms of costs relative to effective payback periods calculated from results of their application in Jersey City.

  15. Consumer energy conservation policies and programs in the Netherlands

    International Nuclear Information System (INIS)

    Boer, J. de; Ester, P.; Mindell, C.; Schopman, M.

    1983-01-01

    This report presents an overview of consumer energy conservation policies and programs in the Netherlands and analyses them in terms of program objectives, conservation strategies, program instruments, context elements, and impacts on energy consumption, on consumers' lifestyles and on the environment. Part 1 briefly outlines the energy situation in the Netherlands. Diversification of energy sources and conservation of energy use are the main themes of Dutch energy policy. Controversial issues are the export volume of natural gas and the acceptability of nuclear energy. Part 2 describes and evaluates a number of consumer energy conservation programs. A broad range of programs is presented, including governmental programs (mass media compaigns, the national insulation program), initiatives from consumer organizations and environmental groups, as well as projects on the community level. Part 3 summarizes the main findings and suggests some policy recommendations. The climate of opinion in the Netherlands appears to be quite favorable towards energy conservation. The commitment to conserve, however, is not very strong. Given the broad variety of conservation programs the necessity of coordination is emphasized. As consumers tend to be weakly represented in the program agencies, it is recommended to extend or introduce their participation. Particular attention is given to the lack of evaluation studies. Usually, program impacts are unknown. The desirability of utilizing community level indicators in the assessment of energy conservation policy is underlined. (orig.)

  16. Recovery Act. Development of a Model Energy Conservation Training Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-07-05

    The overall objective of this project was to develop an updated model Energy Conservation training program for stationary engineers. This revision to the IUOE National Training Fund’s existing Energy Conservation training curriculum is designed to enable stationary engineers to incorporate essential energy management into routine building operation and maintenance tasks. The curriculum uses a blended learning approach that includes classroom, hands-on, computer simulation and web-based training in addition to a portfolio requirement for a workplace-based learning application. The Energy Conservation training program goal is development of a workforce that can maintain new and existing commercial buildings at optimum energy performance levels. The grant start date was July 6, 2010 and the project continued through September 30, 2012, including a three month non-funded extension.

  17. 78 FR 72533 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products

    Science.gov (United States)

    2013-12-03

    ... published on October 23, 2013. That final rule adopted changes to definitions and energy conservation... revised definition and revised energy conservation standards for small duct high velocity central air... Congress has provided in the AEMTCA for the Secretary of Energy to revise definitions and energy...

  18. 75 FR 12144 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential...

    Science.gov (United States)

    2010-03-15

    .... 1. Consensus Agreement On January 26, 2010, the Air-Conditioning, Heating and Refrigeration... subsections. B. History of the Standards Rulemaking for Residential Furnaces 1. Background Energy conservation... recommending minimum energy conservation standards for residential central air conditioners, heat pumps, and...

  19. Assessment of the industrial energy-conservation program. Final report of the Committee on Assessment of the Industrial Energy Conservation Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-01

    Industrial operations in the United States account for some 37% of the nation's consumptions of energy. It has been estimated that this figure will increase to 50% by 1990 unless appropriate industrial energy conservation measures are adopted. However, such measures are difficult to implement in spite of the potential of various existing, emerging, and advanced technologies that can be applied to the problem. Specifically, the application of many industrial energy conservation measures entails high economic, technological, and institutional risks and uncertainties that constrain industries from adopting such measures. Accordingly, in 1975 the federal government started a program designed to mitigate these risks and uncertainties via government-industry partnership arrangements in the interests of national energy conservation. An important element of this program is the Industrial Energy Conservation Program in the Federal Department of Energy (DOE). In June 1980, DOE asked the National Materials Advisory Board, a unit of the National Academy of Sciences-National Research Council, to form a study committee to assess the effectiveness of the Industrial Energy Conservation Program. The committee concluded that federal support embodied in the DOE program, present and planned, is important to conserving additional industrial energy. However, the committee also concluded that the program needs various improvements in project selection and management and in transfer of results to industry. The committee's findings and recommendations and the results of the deliberation of the committee's three panels, a special report on heat and power, and a report on the visit by four members of the committee to Japan are presented.

  20. 77 FR 8525 - Energy Conservation Program: Energy Conservation Standards for Standby Mode and Off Mode for...

    Science.gov (United States)

    2012-02-14

    ... way of representing consumer NPV), and (2) the monetary value of the benefits of emission reductions... standards to the Nation (energy savings, positive NPV of consumer benefits, consumer LCC savings, and... and Conservation Act (EPCA) prescribes energy conservation standards for various consumer products and...

  1. 76 FR 43941 - Energy Conservation Program: Energy Conservation Standards for Direct Heating Equipment

    Science.gov (United States)

    2011-07-22

    ... included the HPBA membership directory, Air-Conditioning, Heating, and Refrigeration Institute (AHRI.... Summary of the Proposed Rule II. History of the Energy Conservation Standards Rulemaking and Current... notice. DOE's rationale is presented in further detail immediately below. II. History of the Energy...

  2. 77 FR 32307 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Washers

    Science.gov (United States)

    2012-05-31

    ... energy conservation standards for various consumer products and certain commercial and industrial... Efficiency Levels 5. Proprietary Designs 6. Reverse Engineering D. Markups Analysis E. Energy and Water Use... per-cycle hot water energy consumption; (2) the total weighted per-cycle machine electrical energy...

  3. 75 FR 52892 - Energy Conservation Program for Consumer Products: Test Procedures for Residential Water Heaters...

    Science.gov (United States)

    2010-08-30

    ... ``Energy Conservation Program for Consumer Products Other Than Automobiles,'' including residential water... final rule revising energy conservation standards for residential water heaters, direct heating.... EERE-2009-BT-TP-0013] RIN 1904-AB95 Energy Conservation Program for Consumer Products: Test Procedures...

  4. 78 FR 12969 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential...

    Science.gov (United States)

    2013-02-26

    ... requested comment on (1) the penetration of ETS programs and the impacts of such programs on consumers and... grid interactive water heaters and that doing so would impede the development of the market for HPWHs..., Dairyland cited a 2005 study \\11\\ of more than 200 demand response programs which found that dynamic pricing...

  5. 76 FR 20089 - Energy Conservation Program: Energy Conservation Standards for Fluorescent Lamp Ballasts

    Science.gov (United States)

    2011-04-11

    ... discussed the following major issues at the public meeting: the pros and cons of various efficiency metrics... of Energy, Building Technologies Program, Mailstop EE-2J, 1000 Independence Avenue, SW., Washington... copies. 4. Hand Delivery/Courier: Ms. Brenda Edwards, U.S. Department of Energy, Building Technologies...

  6. 78 FR 7296 - Energy Conservation Program: Energy Conservation Standards for Small, Large, and Very Large...

    Science.gov (United States)

    2013-02-01

    ... Unit Challenge (RTU Challenge). This program provides a market mechanism that reduces barriers for... commercial air-cooler air conditioners and heat pumps in the field. \\7\\ U.S. Department of Energy. Building... the IEER more than the EER for commercial air conditioners and heat pumps. D. Engineering Analysis The...

  7. Finding of no significant impact for the State Energy Conservation Program

    International Nuclear Information System (INIS)

    1996-01-01

    The Department of Energy (DOE) has prepared a Programmatic Environmental Assessment (PEA), DOE/EA 1068, to assess the environmental impacts associated with the State Energy Conservation Program (SECP). DOE previously funded SECP projects under the Energy Policy and Conservation Act of 1975 (EPCA). The State Energy Efficiency Programs Improvements Act of 1990 (SEEPIA) and the Energy Policy Act of 1992 (EPACT) amended EPCA to broaden the range of state initiatives qualifying for Federal assistance under the SECP. The PEA presents a general analysis of the potential environmental effects associated with broad types of projects that can be funded under the SECP. It does not analyze specific environmental effects or alternatives associated with individual energy conservation, energy efficiency, and renewable energy projects. Individual actions are to be evaluated in detail on a project-by-project basis to determine whether their impacts fall within the bounding analysis of the impacts analyzed in the SECP PEA

  8. 76 FR 52892 - Energy Conservation Program: Energy Conservation Standards for Fluorescent Lamp Ballasts

    Science.gov (United States)

    2011-08-24

    ... data DOE used in support of the NOPR and DOE's approach to accounting for measurement variation and... considering accounting for measurement (specifically lab-to-lab) variation as a separate adjustment to... Power Approximations IV. Accounting for Variation and Compliance Certification Procedures A. Compliance...

  9. 75 FR 57410 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2010-09-21

    ..., regarding the Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products... [Docket No. EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment; Correction AGENCY...

  10. 75 FR 64173 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2010-10-19

    ... [Docket No. EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment AGENCY: Office of Energy... notice of proposed rulemaking, regarding the Energy Conservation Program: Certification, Compliance, and...

  11. 77 FR 49063 - Energy Conservation Program: Test Procedures for Residential Dishwashers and Cooking Products

    Science.gov (United States)

    2012-08-15

    ... Energy Conservation Program: Test Procedures for Residential Dishwashers and Cooking Products; Proposed...-AC01 Energy Conservation Program: Test Procedures for Residential Dishwashers and Cooking Products... procedures for both dishwashers and conventional cooking products for the measurement of energy use in fan...

  12. 75 FR 57555 - Energy Conservation Program for Consumer Products: Test Procedure for Residential Clothes Washers

    Science.gov (United States)

    2010-09-21

    ... technologies not covered by the current procedure; (2) more accurately reflect current consumer behavior and... Part II Department of Energy 10 CFR Part 430 Energy Conservation Program for Consumer Products... [Docket No. EERE-2010-BT-TP-0021] RIN 1904-AC08 Energy Conservation Program for Consumer Products: Test...

  13. 75 FR 57556 - Energy Conservation Program for Consumer Products: Test Procedure for Residential Clothes Washers

    Science.gov (United States)

    2010-09-21

    ... technologies not covered by the current procedure; (2) more accurately reflect current consumer behavior and... Part II Department of Energy 10 CFR Part 430 Energy Conservation Program for Consumer Products... [Docket No. EERE-2010-BT-TP-0021] RIN 1904-AC08 Energy Conservation Program for Consumer Products: Test...

  14. 76 FR 13168 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2011-03-10

    ... average unit costs of residential energy in a Federal Register notice entitled, ``Energy Conservation... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy AGENCY: Office of Energy Efficiency...

  15. Marketing and design of residential energy conservation programs for the elderly

    Energy Technology Data Exchange (ETDEWEB)

    Berry, L.; Schweitzer, M.; Freeman, E.

    1988-02-01

    This report describes barriers to energy conservation by the elderly. Because of these barriers, they have a greater need for programs that assist with the installation of energy-efficiency improvements. In response to this need, a number of specialized programs are operated for the elderly. This report contains descriptions of 39 energy conservation programs for the elderly. Telephone interviews were conducted with the managers of these programs to identify marketing techniques and organizational structures. Interagency networking, presentations and referrals are the most common methods of recruiting clients. Other marketing techniques in order of the frequency of use are: direct mail, bill inserts, television, radio, printed materials, and telemarketing. Many managers consider word-of-mouth advertising from satisfied clients the most effective form of marketing. Interagency networking and support (financial, structural and in-kind) can offer real advantages in the operation of conservation programs for the elderly. The use of specific marketing techniques is probably less important to success in recruiting clients than the degree of trust potential clients have in the sponsoring organization(s). 4 figs., 10 tabs.

  16. 75 FR 61361 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2010-10-05

    .... EERE-2010-BT-CE-0014] RIN 1904-AC24 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment Correction In proposed rule document...

  17. 77 FR 31756 - Energy Conservation Program: Alternative Efficiency Determination Methods and Alternative Rating...

    Science.gov (United States)

    2012-05-30

    ...-AC46 Energy Conservation Program: Alternative Efficiency Determination Methods and Alternative Rating... regulations authorizing the use of alternative methods of determining energy efficiency or energy consumption... alternative methods of determining energy efficiency or energy consumption of various consumer products and...

  18. Training program for energy conservation in new-building construction. Volume II. Energy conservation technology: for the building inspector

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    A Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. This training manual contains the basic information necessary to acquaint the field building inspector with the concepts of energy conservation in buildings and instructs him in the basic techniques of field inspection of energy compliance.

  19. Three essays on the incentive structure of energy conservation programs

    Science.gov (United States)

    Okwelum, Edson Ogochukwu

    consumers in demand response programs. The chapter looks at how the confluences of consumer strategic behavior, technology and price incentives in demand response lead to conflicting outcomes. Demand response has become an important tool for utilities to manage load during peak periods. While the effects of demand response programs on peak load reductions are well studied and intuitive, assessments typically fail to recognize the potential for off-peak behavioral responses that may mitigate the total benefits of the program. Using smart meter consumption data on residential air conditioning units enrolled in a direct load control program, this paper examines changes in consumption prior to and after curtailment events. The manuscript rigorously estimates both peak and off peak changes in consumption to better understand net benefits of DR programs. We examine Pacific Gas and Electric's (PG&E) SmartAC program, which is designed to reduce peak cooling load by directly controlling air conditioning units of participants. Usually, program evaluation uses the availability of a control group to obtain unbiased estimates of program impacts. However, we do not have the luxury of a control group in our data. Instead we estimate unit-specific non-linear consumption models and then compare load on event days to predicted load. Importantly, we use data from the summer 2007 training period from a stratified random sample of 294 participating AC units. In contrast to subsequent summers and normal DR designs, during the training period curtailment days were called for many different temperature levels, not just the hottest days. This aspect means we are not predicting out of sample, and we can have greater confidence in our econometric evidence. Our methodology is validated by a falsification test in which we find no changes in consumption during peak or off-peak times on non-curtailment days that match the temperature and timing profile of actual curtailment days. Several key results

  20. 78 FR 17648 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2013-03-22

    ... Conservation Program for Consumer Products: Representative Average Unit Costs of Energy'', dated April 26, 2012... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy AGENCY: Office of Energy Efficiency...

  1. 76 FR 24761 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2011-05-02

    ... Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and...) Certification. Each manufacturer, before distributing in commerce any basic model of a covered product or.... EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and...

  2. 77 FR 38743 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Battery...

    Science.gov (United States)

    2012-06-29

    ... Efficiency Program for Consumer Products: Energy Conservation Standards for Battery Chargers and External Power Supplies AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION... Energy Efficiency and Renewable Energy, Building Technologies Program, EE-2J, 1000 Independence Avenue SW...

  3. 78 FR 9631 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Residential...

    Science.gov (United States)

    2013-02-11

    ... Efficiency Program for Consumer Products: Energy Conservation Standards for Residential Boilers AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting.... Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, EE-2J...

  4. Training program for energy conservation in new-building construction. Volume IV. Energy conservation technology: advanced course for plan examiners

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    A Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. This manual contains a more in-depth training in the review techniques and concepts required by the plan examiners and code officials in administering the code for conventional (buildings of 3 stories or less) construction.

  5. Analysis to develop a program for energy conservation in irrigated agriculture

    Energy Technology Data Exchange (ETDEWEB)

    Cone, B.W.; Brix, V.L.; Eakin, D.E.; Laughlin, B.M.

    1978-09-01

    It is estimated by the FEA that 0.26 quadrillion Btus of energy is annually required to irrigate crops in the USA. The development of a DOE program for energy conservation in irrigation is described. Information is included on: studies of how this energy consumption can be reduced and by how much; engineering and economic studies of irrigation equipment and methods; proposals for improving the efficiency of pumps and prime movers; projects selected for demonstrating irrigation energy conservation; and recommendations for further research. (LCL)

  6. Department of Energy programs and objectives: energy conservation in agricultural production

    Energy Technology Data Exchange (ETDEWEB)

    1977-12-01

    This document describes the current Department of Energy agriculture research program as it relates to the research recommendations submitted by a 1976 workshop on energy conservation in agricultural production. In-depth discussions on fertilizers, irrigation, crop drying, fuel substitution, crop and animal production systems, greenhouses, materials handling, and transport systems are included. (MCW)

  7. 77 FR 24940 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2012-04-26

    ... 5-year average ratio with heating oil prices published in the Monthly Energy Review, but the propane... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program... and Renewable Energy, Department of Energy. ACTION: Notice. SUMMARY: In this notice, the U.S...

  8. 76 FR 21813 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2011-04-19

    ..., as set forth below: PART 429--CERTIFICATION, COMPLIANCE, AND ENFORCEMENT FOR CONSUMER PRODUCTS AND...: EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment AGENCY: Office of Energy Efficiency...

  9. 76 FR 46202 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2011-08-02

    ... DEPARTMENT OF ENERGY 10 CFR Parts 429 and 430 [Docket No. EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment; Correction Correction In rule document 2011-10401 appearing on pages...

  10. 78 FR 62970 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Science.gov (United States)

    2013-10-23

    ... Standard E. Definition of Basic Model F. Statistical Sampling Plans G. Information To Be Provided in... administrative convenience based on their nature or type. Under EPCA, the energy conservation program consists... Reference of Standards 5. Basic Models 6. Statistical Sampling Plans 7. Information To Be Provided in...

  11. 78 FR 54197 - Energy Efficiency Program for Commercial and Industrial Equipment: Energy Conservation Standards...

    Science.gov (United States)

    2013-09-03

    .... EERE-2013-BT-STD-0030] RIN 1904-AD01 Energy Efficiency Program for Commercial and Industrial Equipment: Energy Conservation Standards for Commercial Packaged Boilers AGENCY: Office of Energy Efficiency and..., Office of Energy Efficiency and Renewable Energy, Building Technologies Office, EE-2J, 1000 Independence...

  12. 75 FR 31323 - Energy Efficiency Program: Energy Conservation Standards Furnace Fans: Public Meeting and...

    Science.gov (United States)

    2010-06-03

    .... EERE-2010-BT-STD-0011] RIN 1904-AC22 Energy Efficiency Program: Energy Conservation Standards Furnace Fans: Public Meeting and Availability of the Framework Document AGENCY: Office of Energy Efficiency and... Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies, EE-2J, 1000 Independence...

  13. 78 FR 8992 - Energy Conservation Program: Test Procedures for Residential Clothes Dryers

    Science.gov (United States)

    2013-02-07

    ... the ``Energy Conservation Program for Consumer Products Other Than Automobiles.'' Covered consumer... consumers doing the laundry that did not provide any function related to the drying process during the... determined by the intersection of the door plane and the loading port. In addition, section 3.1 specifies...

  14. 77 FR 28805 - Energy Conservation Program: Test Procedures for Microwave Ovens

    Science.gov (United States)

    2012-05-16

    ... Energy Conservation Program: Test Procedures for Microwave Ovens AGENCY: Office of Energy Efficiency and... (SNOPR) to amend the test procedures for microwave ovens. That SNOPR proposed amendments to the DOE test... mode energy use of products that combine a microwave oven with other appliance functionality, as well...

  15. 77 FR 76825 - Energy Conservation Program: Certification of Commercial and Industrial HVAC, Refrigeration and...

    Science.gov (United States)

    2012-12-31

    ... Energy Conservation Program: Certification of Commercial and Industrial HVAC, Refrigeration and Water... provisions for commercial refrigeration equipment; commercial heating, ventilating, air-conditioning (HVAC...; commercial HVAC equipment; commercial WH equipment; and walk-in coolers and freezers (June 30 Final Rule). 76...

  16. 75 FR 13123 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2010-03-18

    ... that of heating oil, based on the 2004-2008 averages for these two fuels. The source for these price... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program... and Renewable Energy, Department of Energy. ACTION: Notice. SUMMARY: In this notice, the U.S...

  17. Energy management: a program of energy conservation for the community college facility. [Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Various Authors

    1978-01-01

    This handbook developes helps for assessing and improving the energy efficiency of the community-college facility. The TEEM approach (Total Educational Energy Management) is a labor-intensive approach which requires the commitment and participation of all segments of the college community. The TEEM program presented here defines a series of tasks selected, ordered, and implemented in such a way as to achieve two basic objectives: (1) reducing campus energy requirements, and (2) meeting those reduced energy requirements more efficiently without adversely affecting the quality of educational programs. This guide to large-scale energy conservation on college campuses includes step-by-step procedures for establishing a program task force, defining specific tasks, and assigning responsibilities. Action plans are developed, energy consumption monitored, goals set, and conservation measures implemented. A series of appendices provides more detailed information, charts, and worksheets related to all aspects of energy use. The TEEM program provides the basic structure for achieving a significant reduction in campus energy costs.

  18. Cost-benefit analysis of Hydro-Quebec's energy conservation programs

    International Nuclear Information System (INIS)

    Arsenault, E.

    1993-09-01

    A cost-benefit analysis is presented of the energy conservation programs of Hydro-Quebec for 1991 to 2010. Three possible scenarios are simulated. In the first scenario, Hydro-Quebec data are used without modification. In the second, the simulation is carried out in the absence of the Hydro-Quebec programs, and in the third, it is assumed that any economies achieved are only for the short term. A comparison between these simulations allows determination of results concerning the advantages and the costs which the programs introduce for the three groups comprising society: the consumer, the producer, and the government. The results of these comparisons show that the consumer, the producer, and the whole society gain benefits from the energy conservation programs, while the government loses. 13 refs., 13 figs., 14 tabs

  19. An approach for evaluating utility-financed energy conservation programs. The economic welfare model

    Energy Technology Data Exchange (ETDEWEB)

    Costello, K W; Galen, P S

    1985-09-01

    The main objective of this paper is to illustrate how the economic welfare model may be used to measure the economic efficiency effects of utility-financed energy conservation programs. The economic welfare model is the theoretical structure that was used in this paper to develop a cost/benefit test. This test defines the net benefit of a conservation program as the change in the sum of consumer and producer surplus. The authors advocate the operation of the proposed cost/benefit model as a screening tool to eliminate from more detailed review those programs where the expected net benefits are less than zero. The paper presents estimates of the net benefit derived from different specified cost/benefit models for four illustrative pilot programs. These models are representative of those which have been applied or are under review by utilities and public utility commissions. From the numerical results, it is shown that net benefit is greatly affected by the assumptions made about the nature of welfare gains to program participants. The main conclusion that emerges from the numerical results is that the selection of a cost/benefit model is a crucial element in evaluating utility-financed energy conservation programs. The paper also briefly addresses some of the major unresolved issues in utility-financed energy conservation programs. 2 figs., 3 tabs., 10 refs. (A.V.)

  20. Basic-research foundations for public-education programs in energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Margolin, J B; Misch, M R

    1980-09-01

    The processes whereby people make decisions about specific behavior, the forces that operate on these decisions, and the interaction of several decisions and their modifying effect upon each other are studied. An overview of the current approach to decision study and behavior-change studies is presented. Brief papers prepared by such experts as Maccoby, Tversky, Cialdine, Margolin, Simon, Heider, Festinger, and Lervin are presented. Methodological considerations are discussed. Task B focuses on the specific issue of the purchase of energy-efficient appliances. Task C investigates individual and small-group data-quantification techniques. Task D explains monitoring of ongoing energy-relevant consumer/purchaser surveys. A cost-benefit analysis is made and discussed in Task E of other public and private information programs designed to serve the public welfare. A number of useful findings are presented with the caveat that cost-benefit analysis is not a precise technique. The application of this study to the needs of the energy-conservation program is summarized. (MCW)

  1. 77 FR 76959 - Energy Conservation Program: Request for Exclusion of 100 Watt R20 Short Incandescent Reflector...

    Science.gov (United States)

    2012-12-31

    ... subject to energy conservation standards, the manufacturers removed the product from the market... Conservation Program: Request for Exclusion of 100 Watt R20 Short Incandescent Reflector Lamp From Energy Conservation Standards AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION...

  2. Energy management for the future. A sourcebook of ideas and activities for energy conservation learning programs

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    This book serves as a teaching aid for Canadian school programs in energy conservation and energy management. Suitable curriculum areas and objectives are outlined, and suggestions are presented for organizing thematic study units. References are made throughout to appropriate use of additional media such as filmstrips. Five study units, each with its own classroom activities, are detailed: energy resources, energy and the home, energy and food, energy and leisure, and energy in transportation. Suggestions are given for ongoing energy management educational programs to be tried out once the study units have been completed. 23 figs.

  3. Impact of oil prices, economic diversification policies and energy conservation programs on the electricity and water demands in Kuwait

    International Nuclear Information System (INIS)

    Wood, Michael; Alsayegh, Osamah A.

    2014-01-01

    This paper describes the influences of oil revenue and government's policies toward economic developments and energy efficiency on the electricity and water demands. A Kuwait-specific electricity and water demand model was developed based on historic data of oil income, gross domestic product (GDP), population and electric load and water demand over the past twelve years (1998–2010). Moreover, the model took into account the future mega projects, annual new connected loads and expected application of energy conservation programs. It was run under six circumstances representing the combinations of three oil income scenarios and two government action policies toward economic diversification and energy conservation. The first government policy is the status quo with respect to economic diversification and applying energy conservation programs. The second policy scenario is the proactive strategy of raising the production of the non-oil sector revenue and enforcing legislations toward energy demand side management and conservation. In the upcoming 20 years, the average rates of change of the electric load and water demand increase are 0.13 GW and 3.0 MIGD, respectively, per US dollar oil price increase. Moreover, through proactive policy, the rates of average load and water demand decrease are 0.13 GW and 2.9 MIGD per year, respectively. - Highlights: • Kuwait-specific electricity and water demand model is presented. • Strong association between oil income and electricity and water demands. • Rate of change of electric load per US dollar oil price change is 0.13 GW. • Rate of change of water demand per US dollar oil price change is 3.0 MIGD. • By 2030, efficiency lowers electric load and water demand by 10 and 6%, respectively

  4. Effects of simplifying outreach materials for energy conservation programs that target low-income consumers

    International Nuclear Information System (INIS)

    Wong-Parodi, Gabrielle; Bruine de Bruin, Wändi; Canfield, Casey

    2013-01-01

    Critics have speculated that the limited success of energy conservation programs among low-income consumers may partly be due to recipients having insufficient literacy to understand the outreach materials. Indeed, we found outreach materials for low-income consumers to require relatively high levels of reading comprehension. We therefore improved the Flesch–Kincaid readability statistics for two outreach brochures, by using shorter words and shorter sentences to describe their content. We examined the effect of that simplification on low-income consumers′ responses. Participants from low-income communities in the greater Pittsburgh area, who varied in literacy, were randomly assigned to either original communications about energy conservation programs or our simplified versions. Our findings suggest that lowering readability statistics successfully simplified only the more straightforward brochure in our set of two, likely because its content lent itself better to simplification. Findings for this brochure showed that simplification improved understanding of its content among both low-literacy and high-literacy recipients, without adversely affecting their evaluation of the materials, or their intention to enroll in the advertised programs. We discuss strategies for improving communication materials that aim to reach out to low-income populations. - Highlights: • Brochures about energy programs for low-income consumers can be too hard to read. • We made brochures easier to read by using shorter words and shorter sentences. • Simplifying a straightforward brochure improved the understanding of all recipients. • However, simplifying a complex brochure had no effect on understanding. • We suggest strategies for improving outreach to low-income consumers

  5. Energy conservation programs developed by PETROBRAS; Programas de eficiencia energetica desenvolvidos pela PETROBRAS

    Energy Technology Data Exchange (ETDEWEB)

    Maues, Jair Arone; Marinho, Frederico Augusto Varejao [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The two oil shocks of the 70s provoked a great swerve of course in PETROBRAS during the 80s and 90s. The most important and well known was the strategic decision of exploring oil under the sea. Another important area of the Company includes internal programs for cutting its own energy use and external programs, encouraging their products end-users to rationalize fuel's use. After 1974, our refineries concentrated efforts in level reduction of self-consumption fuel. In the 90s, the Federal Government introduced two energy conservation programs. One created Energy Saving Internal Committees - CICE - in all PETROBRAS' operational units. Another one established a National Program for Oil and Natural Gas Conservation - CONPET. PETROBRAS is in charge of the development and implementation of projects related to this. All these efforts were thoroughly successful. The currently oil production is higher than the country consumption. Nonetheless, as new exploratory frontiers must develop to hold this self-sufficiency in progress, conservation energy programs also have to be continuously updated. This paper presents a balance of the projects implemented since the creation of both programs, a critical analysis on the achieved results and, finally, suggestions on how to improve the effective accomplishment of the initially proposed targets. (author)

  6. Energy conservation programs developed by PETROBRAS; Programas de eficiencia energetica desenvolvidos pela PETROBRAS

    Energy Technology Data Exchange (ETDEWEB)

    Maues, Jair Arone; Marinho, Frederico Augusto Varejao [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The two oil shocks of the 70s provoked a great swerve of course in PETROBRAS during the 80s and 90s. The most important and well known was the strategic decision of exploring oil under the sea. Another important area of the Company includes internal programs for cutting its own energy use and external programs, encouraging their products end-users to rationalize fuel's use. After 1974, our refineries concentrated efforts in level reduction of self-consumption fuel. In the 90s, the Federal Government introduced two energy conservation programs. One created Energy Saving Internal Committees - CICE - in all PETROBRAS' operational units. Another one established a National Program for Oil and Natural Gas Conservation - CONPET. PETROBRAS is in charge of the development and implementation of projects related to this. All these efforts were thoroughly successful. The currently oil production is higher than the country consumption. Nonetheless, as new exploratory frontiers must develop to hold this self-sufficiency in progress, conservation energy programs also have to be continuously updated. This paper presents a balance of the projects implemented since the creation of both programs, a critical analysis on the achieved results and, finally, suggestions on how to improve the effective accomplishment of the initially proposed targets. (author)

  7. Lessons for integrated household energy conservation policy from Singapore’s southwest Eco-living Program

    International Nuclear Information System (INIS)

    He, H.Z.; Kua, H.W.

    2013-01-01

    This study describes a district-level energy intervention and conservation program designed and implemented with the help of community stakeholders, which include students and staff of an educational institution, the National University of Singapore, a local non-governmental environmental group in Singapore and the district government. The program – known formally as the Eco-living Program – was funded by the district government and implemented in the Hong Kah North Residential Council in the south western part of Singapore. The research objectives are three-fold: (1) compare the effectiveness of different intervention methods, based on self-reported behavior scores and actual electricity reduction; (2) investigate how behavior and electricity consumption are influenced by values, situational and psychological factors; (3) assess the effectiveness of different methods of intervention and provide recommendations for improvement. It was found that a combined use of leaflets and stickers resulted in highest (that is, 15.8%) reduction in average consumption. Ease of practicing the recommended energy conservation actions is a strong motivators to change energy consumption behavior. This program exemplifies the important role that community-initiated bottom-up programs can play in promoting sustainable consumption with the financial support from the local (district) government. - Highlights: ► Energy intervention was implemented on 151 households. ► Outreach methods included stickers, leaflets and counseling. ► Self-reported behavioral and actual reductions were recorded. ► Actual reduction was correlated to large housing apartments not in control group. ► Intervention program found to be cost effective and promote stakeholder engagement

  8. Japan's energy conservation policy

    International Nuclear Information System (INIS)

    Yoda, Kenichi

    1990-01-01

    This article reviews developments in Japanese energy conservation since the 1970s. The industrial sector has achieved the greatest success, due to industrial restructuring as well as improvements in energy efficiency. In the residential/commercial sector, the efficiency of appliances has been much improved. Although improvements have been made in the fuel efficiency of passenger cars, energy consumption in the transportation sector has risen slightly owing to increased transport of passengers and freight. The overall responsibility for energy conservation policy rests with the Ministry of International Trade and Industry. MITI is also responsible for implementing specific conservation policies in regard to the industrial and commercial sectors. In the residential sector, MITI works with the Ministry of Construction and in the transportation sector with the Ministry of Transport. To realize the goals of energy conservation policy through general research, dissemination of public information and other activities, MITI works with the Energy Conservation Center (ECC). (author). 2 figs, 3 tabs

  9. Energy Conservation Program Evaluation : Practical Methods, Useful Results : Proceedings of the 1987 Conference.

    Energy Technology Data Exchange (ETDEWEB)

    Argonne National Laboratory; International Conference on Energy Conservation Program Evaluation (3rd : 1987 : Chicago, ILL.)

    1987-01-01

    The success of cutting-edge evaluation methodologies depends on our ability to merge, manage, and maintain huge amounts of data. Equally important is presenting results of the subsequent analysis in a meaningful way. These topics are addressed at this session. The considerable amounts of data that have been collected about energy conservation programs are rarely used by other researchers, either because they are not available in computerized form or, if they are, because of the difficulties of interpreting someone else's data, format inconsistencies, incompatibility of computers, lack of documentation, data entry errors, and obtaining data use agreements. Even census, RECS, and AHS data can be best used only by a researcher who is intimately familiar with them. Once the data have been accessed and analyzed, the results need to be put in a format that can be readily understood by others. This is a particularly difficult task when submetered data is the basis of the analysis. Stoops and Gilbride will demonstrate their methods of using off-the-shelf graphics software to illustrate complex hourly data from nonresidential buildings.

  10. Consumer behavior and energy conservation. Final report of the LINKKI research program; Kuluttajien kaeyttaeytyminen ja energiansaeaestoe. LINKKI- tutkimusohjelman loppuraportti

    Energy Technology Data Exchange (ETDEWEB)

    Arvola, A.; Kasanen, P. [Helsinki Univ. (Finland). Dept. of Social Psychology

    1996-10-01

    The goal of LINKKI - the research program on consumer behavior and energy conservation - was to promote energy conservation by seeking potential and means for energy conservation in the short term in areas that are linked with consumers` activities and choices. Research has been conducted in the following sectors: home, buildings, traffic, and indirect energy consumption. This report discusses the results obtained through the program against a more general background of people`s ways of life and the various factors explaining energy consumption. The report assesses the differences discovered between households, for instance, with respect to demographic factors, life situations, motivation towards conservation, information needs, and attitudes to information. These factors were evaluated in their role as barriers to energy conservation. The research projects have surveyed various ways of disseminating information (e.g. advice, feedback on consumption, computer programs, energy labels), as well as information needs and decision-making processes existing among households. Research conducted in the sector of indirect energy consumption has produced data on conservation potential with respect to the selection of foods and the organization of leisure activities. In the sector of energy consumption in traffic, assessments have been made concerning the conservation potential that can be achieved by reorganizing activities and data transmission (e.g. distance work, flexible working time). The prerequisites for the actualization of this potential have also been studied. Similarly, the opportunities of reducing energy consumption in traffic by means of prices, taxation systems and regional ticket systems have been analyzed

  11. 76 FR 647 - Energy Conservation Program: Test Procedures for Electric Motors and Small Electric Motors

    Science.gov (United States)

    2011-01-05

    ... Electric Motors and Small Electric Motors; Proposed Rule #0;#0;Federal Register / Vol. 76, No. 3... Motors and Small Electric Motors AGENCY: Office of Energy Efficiency and Renewable Energy, Department of... motors and small electric motors, clarify the scope of energy conservation standards for electric motors...

  12. 78 FR 79419 - Energy Conservation Program for Consumer Products and Commercial and Industrial Equipment: Effect...

    Science.gov (United States)

    2013-12-30

    ...\\ Present value Discount rate Category (million 2012$) (percent) Benefits Operating Cost Savings 1,848 7 3... Energy Conservation Standards \\5\\ Present value Discount rate Category (million 2012$) (percent) Benefits... Conservation Standards \\6\\ Present value Discount rate Category (billion 2012$) (percent) Benefits Operating...

  13. 75 FR 27170 - Energy Conservation Program for Consumer Products: Determination Concerning the Potential for...

    Science.gov (United States)

    2010-05-14

    ... Points for a 203-Watt Multiple-Voltage EPS for a Video Game Console Efficiency- Reference point for... would likely benefit economically from the imposition of energy conservation standards for non-Class A... projected savings and national NPV considers only the direct financial costs and benefits to consumers of...

  14. 77 FR 76952 - Energy Conservation Program for Consumer Products: Association of Home Appliance Manufacturers...

    Science.gov (United States)

    2012-12-31

    ... dishwashers. Given that 65 percent of all standard dishwashers currently on the market meet or exceed the..., standard, or criteria for that determination. It is a textbook arbitrary and capricious determination. As... the market meet or exceed the minimum energy conservation standards established in the direct final...

  15. 78 FR 63410 - Energy Conservation Program for Consumer Products: Test Procedures for Direct Heating Equipment...

    Science.gov (United States)

    2013-10-24

    ... test procedures for direct heating equipment and pool heaters established under the Energy Policy and... U.S.C. 6293(e)(2)) The current energy conservation standards for direct heating equipment and pool... DEPARTMENT OF ENERGY 10 CFR Part 430 [Docket Number EERE-2013-BT-TP-0004] RIN 1904-AC94 Energy...

  16. 78 FR 16443 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Ceiling Fans...

    Science.gov (United States)

    2013-03-15

    ... Standards for Ceiling Fans and Ceiling Fan Light Kits AGENCY: Office of Energy Efficiency and Renewable... consider amending the energy conservation standards for ceiling fans and ceiling fan light kits. DOE also....gov . Follow the instructions for submitting comments. Email: CeilingFan[email protected

  17. Energy conservation in industry

    International Nuclear Information System (INIS)

    Pembleton, P.

    1992-01-01

    Energy Conservation in Industry is the first number in the Energy and Environmental Series of the Industrial and Technological Information Bank (INTIB). The Series supersedes the INECA Journal and reflects the broader information programme undertaken by INTIB. The present number of the Series contains contributions from three major international databases and five topic-specific sources, including three United Nations Organizations. The present publication consists of a recent technical report on a current topic: reducing energy loss in four industrial sectors and improving energy conservation through waste-heat recovery, followed by two sections containing abstracts of technical materials

  18. Effects of energy conservation programs: report to IEA (International Energy Agency) Annex 7, Local Government Energy Projects

    Energy Technology Data Exchange (ETDEWEB)

    Klingberg, T.; Benton, L.; Engebeck, L.; Erikson, B.E.; Fredriksson, G.

    1984-01-01

    This Bulletin is an anthology of 13 essays by different authors covering various aspects of government programs for energy conservation. In six essays effects of energy codes, subsidies to conservation measures in buildings and advisory services are discussed. Results from several empirical studies are presented. Five essays deal with side-effects (or secondary effects) of energy conservation. Moisture and increased radiation from radon are two types of negative effects that are covered. Also positive effects such as promotion of innovations or increased employment are discussed. Policy instruments are normally implemented by the local authorities. This is illustrated by a description of energy planning for a new suburb in one municipality. Some tentative conclusions are presented in the final essay.

  19. 75 FR 41845 - Energy Conservation Program for Certain Commercial and Industrial Equipment: Decision and Order...

    Science.gov (United States)

    2010-07-19

    ... conditioners and heat pumps. The waiver is specific to the Sanyo variable capacity ECO-i (commercial) multi... in this notice to test and rate its ECO-i multi-split products. DATES: This Decision and Order is..., Building Technologies Program, Mailstop EE-2J, 1000 Independence Avenue, SW., Washington, DC 20585-0121...

  20. 78 FR 79638 - Energy Conservation Program for Consumer Products: Proposed Determination of Hearth Products as a...

    Science.gov (United States)

    2013-12-31

    ... Conservation Program for Consumer Products: Proposed Determination of Hearth Products as a Covered Consumer... determined that hearth products qualify as a covered product under Part A of Title III of the Energy Policy and Conservation Act (EPCA), as amended. More specifically, DOE has tentatively determined that hearth...

  1. 76 FR 65631 - Energy Conservation Program: Test Procedures for Microwave Ovens

    Science.gov (United States)

    2011-10-24

    ... Conservation Program: Test Procedures for Microwave Ovens AGENCY: Office of Energy Efficiency and Renewable... residential microwave ovens. DOE specifically is seeking information, data, and comments regarding representative and repeatable methods for measuring the energy use of microwave-only ovens and combination...

  2. Dictionary of applied energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Kut, D

    1982-01-01

    The escalating cost of energy is drawing an ever increasing number of people into the planning and execution of energy conservation measures and programs and confronts them with the specialist terminology of the conservationist. The object of this illustrated dictionary is to list the generality of terms employed in energy conservation practice and to explain, with the aid of appropriate illustrations, the basic definitions and underlying techniques.

  3. 78 FR 65629 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

    Science.gov (United States)

    2013-11-01

    ... representative of consumer behavior. For example, if the number of annual cycles results in greater than a 3-day... Conservation Program for Consumer Products: Decision and Order Granting a Waiver to Whirlpool Corporation From... Conservation Program for Consumer Products Other Than Automobiles, a program covering most major household...

  4. Evaluation of utility residential energy conservation programs: A Pacific Northwest example

    Energy Technology Data Exchange (ETDEWEB)

    Hirst, E; Bronfman, B; Goeltz, R; Keating, K; Lerman, D; Timble, J

    1984-03-01

    This paper describes a detailed quantitative evaluation of the Residential Weatherization Pilot Program, operated by the Bonneville Power Administration from 1980 through 1982. The program provided free energy audits to more than 6000 electrically-heated homes and gave zero-interest loans to weatherize almost 4000 of these audited homes. The total cost of the program was almost $8 million. Using actual electricity consumption records for program participants and nonparticipants, we calculated the energy-saving effect of the pilot program in several ways and always reached the same conclusion. Households that received an audit and weatherization loan reduced their annual electricity consumption by about 3500 kWh relative to what they would have done without the program; this 3500 kWh is the saving that can be directly attributed to the program. Using a simple net present worth approach, the authors computed program benefits and costs for participating households, the BPA power system, and the Pacific Northwest region as a whole. Under a wide range of assumptions concerning discount rate, years until the weatherization loan is repaid, program energy saving, and BPA's marginal cost of power, the program is economically attractive from all three perspectives.

  5. 75 FR 13114 - Energy Conservation Program for Certain Industrial Equipment: Publication of the Petition for...

    Science.gov (United States)

    2010-03-18

    ... capacity ECO-i (commercial) multi- split heat pumps. Through this document, DOE: (1) Solicits comments.... Brenda Edwards, U.S. Department of Energy, Building Technologies Program, Mailstop EE-2J/1000... Technologies Program, 950 L'Enfant Plaza, SW., Suite 600, Washington, DC 20024. Please submit one signed...

  6. 77 FR 35299 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Science.gov (United States)

    2012-06-13

    ... Conservation Program for Consumer Products Other Than Automobiles,\\2\\ a program covering most major household... polluting than sources that must be used during peak demand times. The utilities indicated that a survey... customarily treated as confidential within the industry; (3) whether the information is generally known by or...

  7. 77 FR 28673 - Energy Conservation Program for Consumer Products: Test Procedures for Residential Furnace Fans

    Science.gov (United States)

    2012-05-15

    ... multipliers based on climate, consumer behavior assumptions, and product characteristics (e.g., multi-stage or... Conservation Program for Consumer Products: Test Procedures for Residential Furnace Fans; Proposed Rule #0;#0... Conservation Program for Consumer Products: Test Procedures for Residential Furnace Fans AGENCY: Office of...

  8. 76 FR 971 - Energy Conservation Program for Consumer Products: Test Procedures for Clothes Dryers and Room...

    Science.gov (United States)

    2011-01-06

    .... Detergent Specifications for Clothes Dryer Test Cloth Preconditioning 5. Changes To Reflect Current Usage... conservation standard; (3) updated detergent specifications for clothes dryer test cloth preconditioning; (4... detergent specifications for clothes dryer test cloth preconditioning; (7) update the references to external...

  9. 75 FR 56795 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2010-09-16

    ...: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment... product, additional provisions for imports, voluntary industry certification programs (VICP), verification... DOE intends to apply certification, compliance, and enforcement regulations to all covered products...

  10. 76 FR 21881 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung...

    Science.gov (United States)

    2011-04-19

    ... Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung Electronics America, Inc... comments. SUMMARY: This notice announces receipt of and publishes the Samsung Electronics America, Inc. (Samsung) petition for waiver and application for [[Page 21882

  11. The China Motor Systems Energy Conservation Program: A major national initiative to reduce motor system energy use in China

    Energy Technology Data Exchange (ETDEWEB)

    Nadel, Steven; Wang, Wanxing; Liu, Peter; McKane, Aimee T.

    2001-05-31

    Electric motor systems are widely used in China to power fans, pumps, blowers, air compressors, refrigeration compressors, conveyers, machinery, and many other types of equipment. Overall, electric motor systems consume more than 600 billion kWh annually, accounting for more than 50 percent of China's electricity use. There are large opportunities to improve the efficiency of motor systems. Electric motors in China are approximately 2-4 percent less efficient on average than motors in the U.S. and Canada. Fans and pumps in China are approximately 3-5 percent less efficient than in developed countries. Even more importantly, motors, fans, pumps, air compressors and other motor-driven equipment are frequently applied with little attention to system efficiency. More optimized design, including appropriate sizing and use of speed control strategies, can reduce energy use by 20 percent or more in many applications. Unfortunately, few Chinese enterprises use or even know about these energy-saving practices. Opportunities for motor system improvements are probably greater in China than in the U.S. In order to begin capturing these savings, China is establishing a China Motor Systems Energy Conservation Program. Elements of this program include work to develop minimum efficiency standards for motors, a voluntary ''green motor'' labeling program for high-efficiency motors, efforts to develop and promote motor system management guidelines, and a training, technical assistance and financing program to promote optimization of key motor systems.

  12. Hydro-Quebec's 'Econo-Confort' program. A unique energy-conservation measure

    International Nuclear Information System (INIS)

    Dunn, R.

    1996-01-01

    In December 1993, Hydro-Quebec launched an ambitious direct installation program known to the public as Econo-Confort. The program is aimed at reducing electricity consumption by residential customers. In the period 1994-1997, Econo-Confort representatives will visit Quebec's 2,8 million homes individually and offer to install energy-saving products such as electronic thermostats and low-flow shower-heads, at no charge to customers. The program's objectives are astronomical: 8 million thermostats and 800,000 shower-heads will be installed in 1.1 million households, for total energy savings of 2,010 GWh. Planning such an extensive operation demanded an equally extensive performance analysis, covering the technology, consumer behaviour and commercial strategy aspects. (author)

  13. 76 FR 19077 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

    Science.gov (United States)

    2011-04-06

    ... technology. Specifically, DOE granted GE, Whirlpool, Electrolux (3 waivers), LG, Samsung (2 waivers), and...- freezer products for compliance, marketing, or other purposes only to the extent that such products have...

  14. 77 FR 31742 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Science.gov (United States)

    2012-05-30

    ... product is prescribed, no manufacturer may make any representation with respect to water usage of such... or plastic plate that requires the testing laboratory to adapt its test depending on the specific...

  15. 77 FR 11785 - Energy Conservation Program: Public Meeting and Availability of the Framework Document for High...

    Science.gov (United States)

    2012-02-28

    ... standards for high-intensity discharge (HID) lamps. Accordingly, DOE will hold a public meeting to discuss..._standards/commercial/high_intensity_discharge_lamps.html . DATES: The Department will hold a public meeting... Technologies Program, Mailstop EE-2J, Framework Document for High-Intensity Discharge Lamps, EERE-2010-BT-STD...

  16. 76 FR 38287 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2011-06-30

    ... Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial... products will be required to submit certification reports no later than December 31, 2012. DATES: This rule... some certification requirements for these products but make those requirements [[Page 38289

  17. 78 FR 63823 - Energy Conservation Program: Test Procedures for Television Sets

    Science.gov (United States)

    2013-10-25

    ..., Building Technologies Program, EE-2J, 1000 Independence Avenue SW., Washington, DC 20585-0121. Telephone... test signals for test content and was geared heavily for older screen technologies like cathode ray... tested. For example, in Figure 5, testing would not be required with Eco mode both enabled and disabled...

  18. 78 FR 75961 - Energy Conservation Program: Test Procedures for Electric Motors

    Science.gov (United States)

    2013-12-13

    ... Conservation Program: Test Procedures for Electric Motors; Final Rule #0;#0;Federal Register / Vol. 78 , No... Procedures for Electric Motors AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy... procedures for electric motors to allow currently unregulated motors to be tested by clarifying the test...

  19. 76 FR 59003 - Energy Conservation Program: Compliance Certification for Electric Motors

    Science.gov (United States)

    2011-09-23

    ... Conservation Program: Compliance Certification for Electric Motors AGENCY: Office of Energy Efficiency and... provides a new means for manufacturers of electric motors and their private labelers to prepare and submit... preferred mechanism for submitting Compliance Certification information for electric motors covered under...

  20. 77 FR 26607 - Energy Conservation Program: Test Procedures for Electric Motors and Small Electric Motors

    Science.gov (United States)

    2012-05-04

    ... Conservation Program: Test Procedures for Electric Motors and Small Electric Motors; Final Rules #0;#0;Federal... Procedures for Electric Motors and Small Electric Motors AGENCY: Office of Energy Efficiency and Renewable... electric motors and small electric motors. That supplemental proposal, along with an earlier proposal from...

  1. 75 FR 27182 - Energy Conservation Program: Web-Based Compliance and Certification Management System

    Science.gov (United States)

    2010-05-14

    ... Conservation Program: Web-Based Compliance and Certification Management System AGENCY: Office of Energy... following means: 1. Compliance and Certification Management System (CCMS)--via the Web portal: http... certification reports to the Department of Energy (DOE) through an electronic Web-based tool, the Compliance and...

  2. 77 FR 74559 - Energy Conservation Program for Consumer Products: Test Procedures for Residential Water Heaters...

    Science.gov (United States)

    2012-12-17

    ... Conservation Program for Consumer Products: Test Procedures for Residential Water Heaters, Direct Heating... Energy (DOE) is amending its test procedures for residential water heaters, direct heating equipment (DHE... necessary for residential water heaters, because the existing test procedures for those products already...

  3. 76 FR 56347 - Energy Conservation Program for Consumer Products: Test Procedures for Residential Water Heaters...

    Science.gov (United States)

    2011-09-13

    ... Conservation Program for Consumer Products: Test Procedures for Residential Water Heaters, Direct Heating... proposed to amend, where appropriate, its test procedures for residential water heaters, direct heating... notes that the test procedure and metric for residential water heaters currently address and incorporate...

  4. 76 FR 16760 - Energy Conservation Program for Consumer Products: Publication of the Petition for Waiver and...

    Science.gov (United States)

    2011-03-25

    ... Conservation Program for Consumer Products: Publication of the Petition for Waiver and Notice of Granting the... Electronics America, Inc. (Samsung) petition for waiver (hereafter, ``petition'') from specified portions of... Authority Title III, part B of the Energy Policy and Conservation Act of 1975 (EPCA), Public Law 94-163 (42...

  5. 75 FR 19959 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung...

    Science.gov (United States)

    2010-04-16

    ... Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung Electronics America, Inc.... SUMMARY: This notice announces receipt of and publishes the Samsung Electronics America, Inc. (Samsung... refrigerator-freezers to additional Samsung basic models. Through this document, DOE also solicits comments...

  6. 75 FR 13120 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

    Science.gov (United States)

    2010-03-18

    ... Conservation Program for Consumer Products: Decision and Order Granting a Waiver to Samsung Electronics America... (Case No. RF-011) that grants to Samsung Electronics America, Inc. (Samsung) a waiver from the DOE... humidity sensors and adaptive control anti-sweat heaters. Under today's decision and order, Samsung shall...

  7. 75 FR 57937 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung...

    Science.gov (United States)

    2010-09-23

    ... Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung Electronics America, Inc... announces receipt of and publishes the Samsung Electronics America, Inc. (Samsung) petition for waiver... clothes washer test procedure. Through this notice, DOE also solicits comments with respect to the Samsung...

  8. 75 FR 45623 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

    Science.gov (United States)

    2010-08-03

    ... Conservation Program for Consumer Products: Decision and Order Granting a Waiver to Samsung Electronics America...-014) that grants to Samsung Electronics America, Inc. (Samsung) a waiver from the DOE electric... decision and order, Samsung shall be required to test and rate these refrigerator- freezers equipped with...

  9. 76 FR 12825 - Energy Conservation Program for Consumer Products: Test Procedure for Microwave Ovens

    Science.gov (United States)

    2011-03-09

    ... Conservation Program for Consumer Products: Test Procedure for Microwave Ovens AGENCY: Office of Energy.... Department of Energy (DOE) is amending its test procedures for microwave ovens under the Energy Policy and Conservation Act (EPCA) to provide for the measurement of standby mode and off mode power use by microwave...

  10. 75 FR 42612 - Energy Conservation Program for Consumer Products: Test Procedure for Microwave Ovens

    Science.gov (United States)

    2010-07-22

    ... Conservation Program for Consumer Products: Test Procedure for Microwave Ovens AGENCY: Office of Energy... (NOPR) in which DOE proposed test procedures for microwave ovens under the Energy Policy and Conservation Act (EPCA) to measure standby mode and off mode power use by microwave ovens. To address issues...

  11. 78 FR 4015 - Energy Conservation Program: Test Procedures for Microwave Ovens

    Science.gov (United States)

    2013-01-18

    ... Conservation Program: Test Procedures for Microwave Ovens AGENCY: Office of Energy Efficiency and Renewable... microwave ovens. That SNOPR proposed amendments to the DOE test procedure to incorporate provisions from the... energy use of products that combine a microwave oven with other appliance functionality, as well as minor...

  12. 76 FR 19902 - Energy Conservation Program for Consumer Products: Decision and Order Granting 180-Day Extension...

    Science.gov (United States)

    2011-04-11

    ... Furnace Company; (16) New Yorker Residential Heating Boilers; (17) Nordyne; (18) NY Thermal Inc.; (19... Products LLC; (24) Trane; (25) Triangle Tube; (26) US Boiler Company; and (27) Weil-McLain. In the same... Conservation Program for Consumer Products: Decision and Order Granting 180-Day Extension of Compliance Date...

  13. 78 FR 79643 - Energy Conservation Program for Consumer Products: Landmark Legal Foundation; Petition for...

    Science.gov (United States)

    2013-12-31

    ... consumer behavior; and questions about why comments on the Draft National Climate Assessment were not... Program for Consumer Products: Landmark Legal Foundation; Petition for Reconsideration AGENCY: Office of... Energy Consumers of America (IECA), American Gas Association (AGA), Cato Institute Center for Study of...

  14. 78 FR 151 - Energy Conservation Program: Test Procedures for Residential Clothes Dryers

    Science.gov (United States)

    2013-01-02

    .... Hand Delivery/Courier: Ms. Brenda Edwards, U.S. Department of Energy, Building Technologies Program... Second Edition for Measuring Standby Mode and Off Mode Power 1. Stable Power Consumption 2. Unstable, Non... Load 5. Incorporation by Reference of IEC Standard 62301 (Second Edition) 6. Technical Correction to...

  15. 75 FR 62127 - Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to...

    Science.gov (United States)

    2010-10-07

    ... requirements for covered consumer products when (1) the petitioner's basic model for which the petition for... petition, discussed below. Whirlpool claims that water softeners can prevent consumer behaviors that... Conservation Program for Consumer Products: Decision and Order Granting a Waiver to Whirlpool Corporation From...

  16. Overview of energy-conservation research opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Hopp, W.J.; Hauser, S.G.; Hane, G.J.; Gurwell, W.E.; Bird, S.P.; Cliff, W.C.; Williford, R.E.; Williams, T.A.; Ashton, W.B.

    1981-12-01

    This document is a study of research opportunities that are important to developing advanced technologies for efficient energy use. The study's purpose is to describe a wide array of attractive technical areas from which specific research and development programs could be implemented. Research areas are presented for potential application in each of the major end-use sectors. The study develops and applies a systematic approach to identifying and screening applied energy conservation research opportunities. To broadly cover the energy end-use sectors, this study develops useful information relating to the areas where federally-funded applied research will most likely play an important role in promoting energy conservation. This study is not designed to produce a detailed agenda of specific recommended research activities. The general information presented allows uniform comparisons of disparate research areas and as such provides the basis for formulating a cost-effective, comprehensive federal-applied energy conservation research strategy. Chapter 2 discusses the various methodologies that have been used in the past to identify research opportunities and details the approach used here. In Chapters 3, 4, and 5 the methodology is applied to the buildings, transportation, and industrial end-use sectors and the opportunities for applied research in these sectors are discussed.Chapter 6 synthesizes the results of the previous three chapters to give a comprehensive picture of applied energy conservation research opportunities across all end-use sectors and presents the conclusions to the report.

  17. 77 FR 13887 - Energy Conservation Program: Test Procedures for Residential Clothes Washers

    Science.gov (United States)

    2012-03-07

    ... dryer usage factor; and (5) replaces the current representative load size calculation in the drying... specifications for the dryer to be used for bone-drying the test cloth; (10) clarifies the procedures for.... 12 at p. 4-5) NEEA expressed concern that the definition of the active washing mode leaves out...

  18. 78 FR 79579 - Energy Conservation Program: Alternative Efficiency Determination Methods, Basic Model Definition...

    Science.gov (United States)

    2013-12-31

    ... features to be excluded from certification, verification, and enforcement testing as long as specific... class* that must be tested Self-Contained Open Refrigerators... 2 Basic Models. Self-Contained Open... Open Freezers..... 2 Basic Models. Self-Contained Closed Refrigerators. 2 Basic Models. Self-Contained...

  19. 75 FR 64621 - Energy Conservation Program for Consumer Products: Test Procedures for Residential Furnaces and...

    Science.gov (United States)

    2010-10-20

    ... and Refrigeration Institute (AHRI), the People's Republic of China (China), and Energy Kinetics, Inc.... Specifically, DOE is not aware of an agreed upon representative average use simulation or model, utilizing... efficiency would be inferred by some combination of laboratory simulation or mathematical modeling utilizing...

  20. Conclusions drawn from actions implemented within the first stage of the Cracow program of energy conservation and clean fossil fuels

    Energy Technology Data Exchange (ETDEWEB)

    Bieda, J.; Bardel, J.; Pierce, B.

    1995-12-31

    Since 1992 Brookhaven National Laboratory (BNL) and Pacific Northwest Laboratory (PNL), acting on behalf of the U.S. Department of Energy, executed the first stage of the Cracow Program of Energy Conservation and Clean Fossil Fuels, called also American-Polish Program of Actions for Elimination of Low Emission Sources in Cracow. The main contractor for BNL and PNL was the Cracow Development Office (BRK). The interest in improving the condition of Cracow air results from the fact that the standard for permissible air pollution was exceeded several times in Cracow and especially within the central part of the town. Therefore, air pollution appeared one of the most important problems that faced the municipal authorities. It followed from monitoring investigations that the high level of air pollutant concentration is caused by in-home coal-fired tile stoves operated in winter seasons and by coal- and coke-fired boiler houses simulated mainly in the central part of the town. The results obtained in first stage are presented. This paper is an attempt to formulate conclusions drawn from these works and recommendations with regard to the future policy of the town authorities; selected results are presented to clarify or illustrate the conclusions.

  1. The Post-Intervention Persistence of Energy Conservation Behaviors: An Evaluation of the ‘Start Green’ Program

    Directory of Open Access Journals (Sweden)

    S. Barnett Burns

    2018-03-01

    Full Text Available For more than four decades, behavioral intervention programs informed by psychology have been employed to increase pro-environmental behaviors. However, there has been little evidence for the post-intervention durability of target behaviors. The few studies that have conducted such evaluations have found that improvements often return to baseline levels post-intervention. This study evaluated the durability of home energy conservation behaviors before, during, and after a community based multi-technique intervention program, and examined the relationship between behavioral durability and the perceived importance, convenience and family norms of each behavior, as well as generalized pro-conservation decision making. The results show increased frequency in target behaviors that remain elevated seven months post-intervention. While the reported generalization of pro-conservation decision-making consistently increased during the study, perceived importance, convenience, and family norms of target conservation behaviors were largely unaffected. In addition, the few significant alterations in these perceptions were found to be due to increases during the post-intervention period only, indicating that they are not necessary pre-requisites for durable behavior change. These results show that a well designed community based intervention can have direct impacts on target behaviors that persist beyond its termination.

  2. Federal energy conservation programs pursuant to section 381 of the Energy Policy and Conservation Act (Public Law 94-163). Annual report to Congress

    Energy Technology Data Exchange (ETDEWEB)

    1979-02-21

    This report provides an overview of the activities and achievements of the executive branch of the Federal Government in implementing the energy conservation requirements and provisions of section 381 of the Energy Policy and Conservation Act (EPCA) of 1975 (Public Law 94-163). The report describes Federal actions to develop procurement policies that promote energy conservation and efficiency, develop a Federal 10-Year Buildings Energy Conservation Plan, develop responsible public education and information programs, encourage energy conservation and energy efficiency, and promote vanpooling and carpooling arrangements. About half of the Nation's energy is used in our homes and automobiles. Another 48 percent is used by State and local governments, business and insutry, in providing needed goods and services. The Federal Government is the Nation's largest energy user, accouting for 2.2 percent of the total national energy used in 1977. This energy is used by nearly 6 million people in more than 400 thousand buildings and in the operation of more than 600 thousand vehicles. While energy conservation and energy efficiency measures alone cannot solve our immediate problems, they are an essential part of our transition to an era of scarce and expensive energy supplies.

  3. Handbook on energy conservation

    International Nuclear Information System (INIS)

    1989-12-01

    This book shows energy situation in recent years, which includes reserves of energy resource in the world, crude oil production records in OPEC and non OPEC, supply and demand of energy in important developed countries, prospect of supply and demand of energy and current situation of energy conservation in developed countries. It also deals with energy situation in Korea reporting natural resources status, energy conservation policy, measurement for alternative energy, energy management of Korea, investment in equipment and public education for energy conservation.

  4. Why not energy conservation?

    International Nuclear Information System (INIS)

    Carlson, Shawn

    2016-01-01

    Energy conservation is a deep principle that is obeyed by all of the fundamental forces of nature. It puts stringent constraints on all systems, particularly systems that are ‘isolated,’ meaning that no energy can enter or escape. Notwithstanding the success of the principle of stationary action, it is fair to wonder to what extent physics can be formulated from the principle of stationary energy. We show that if one interprets mechanical energy as a state function, then its stationarity leads to a novel formulation of classical mechanics. However, unlike Lagrangian and Hamiltonian mechanics, which deliver their state functions via algebraic proscriptions (i.e., the Lagrangian is always the difference between a system’s kinetic and potential energies), this new formalism identifies its state functions as the solutions to a differential equation. This is an important difference because differential equations can generate more general solutions than algebraic recipes. When applied to Newtonian systems for which the energy function is separable, these state functions are always the mechanical energy. However, while the stationary state function for a charged particle moving in an electromagnetic field proves not to be energy, the function nevertheless correctly encodes the dynamics of the system. Moreover, the stationary state function for a free relativistic particle proves not to be the energy either. Rather, our differential equation yields the relativistic free-particle Lagrangian (plus a non-dynamical constant) in its correct dynamical context. To explain how this new formalism can consistently deliver stationary state functions that give the correct dynamics but that are not always the mechanical energy, we propose that energy conservation is a specific realization of a deeper principle of stationarity that governs both relativistic and non-relativistic mechanics. (paper)

  5. Analyzing Barriers to Energy Conservation in Residences and Offices: The Rewire Program at the University of Toronto

    Science.gov (United States)

    Stokes, Leah C.; Mildenberger, Matto; Savan, Beth; Kolenda, Brian

    2012-01-01

    Conducting a barriers analysis is an important first step when designing proenvironmental behavior change interventions. Yet, detailed information on common barriers to energy conservation campaigns remains unavailable. Using a pair of original surveys, we leverage the theory of planned behavior to report on the most important barriers for…

  6. 78 FR 68331 - Energy Conservation Program: Request for Exclusion of 100 Watt R20 Short Incandescent Reflector...

    Science.gov (United States)

    2013-11-14

    ... attempt to replace the same lamp that was previously installed. It is not typical consumer behavior to... energy conservation standards for certain commercial and industrial equipment and various consumer... Characteristics in Substitutes 1. Improved R20 Short Lamp 2. 60 W PAR16 Lamp 3. LED Lamps 4. Consumer Use of...

  7. Workplace Energy Conservation at Michigan State University

    Science.gov (United States)

    Allen, Summer; Marquart-Pyatt, Sandra T.

    2018-01-01

    Purpose: This research contributes to the literature on workplace energy conservation by examining the predictors of individual employee behaviors and policy support in a university. The purpose of this research is to better understand what factors influence energy conservation behaviors in this setting to inform programs and interventions.…

  8. Integral programs of energy conservation (exergy) in the petroleum industry; Programas integrales de ahorro de energia (exergia) en la industria petrolera

    Energy Technology Data Exchange (ETDEWEB)

    Rivero Rodriguez, R. [Instituto Mexicano del Petroleo (IMP), Mexico, D. F. (Mexico)

    1995-12-31

    This paper presents some of the fundamental issues related to energy conservation programs in general and to the petroleum industry in particular with the purpose of integrating them both, that is, considering not only the energy issues, but also the ecological and economical aspects. This is achieved by using the two fundamental laws of thermodynamics (the science that studies energy, its characteristics, and its transformations) through the use of the exergy concept, which is a measure of the energy quality and of its withdrawal with respect to the environment. The origins of the present-day technologies, regarding energy conservation, the short, medium and long term general strategies and the implementation stages of the integral programs of energy conservation are presented, and it concludes with a series of general policies aimed at making the energy conservation programs more congruent with the maintenance of a sustainable development. [Espanol] En este trabajo se presentan algunos aspectos fundamentales relacionados con los programas de ahorro de energia en general, y en la industria petrolera en particular, con objeto de lograr que los mismos sean integrales, es decir que consideren no solo los aspectos puramente energeticos, sino tambien los aspectos ecologicos y economicos. Esto se logra utilizando conjuntamente las dos leyes fundamentales de la termodinamica (la ciencia que estudia la energia, sus caracteristicas y sus transformaciones), mediante la utilizacion del concepto de exergia, que es una medida de la calidad de la energia y de su alejamiento con respecto al medio ambiente. Se presentan los origenes de las tendencias tecnologicas actuales en materia de ahorro de energia, las estrategias generales a corto, mediano y largo plazos y las etapas en la implementacion de programas integrales de ahorro de energia, para concluir con una serie de politicas generales tendientes a lograr que los programas de ahorro de energia sean congruentes con el

  9. Integral programs of energy conservation (exergy) in the petroleum industry; Programas integrales de ahorro de energia (exergia) en la industria petrolera

    Energy Technology Data Exchange (ETDEWEB)

    Rivero Rodriguez, R [Instituto Mexicano del Petroleo (IMP), Mexico, D. F. (Mexico)

    1996-12-31

    This paper presents some of the fundamental issues related to energy conservation programs in general and to the petroleum industry in particular with the purpose of integrating them both, that is, considering not only the energy issues, but also the ecological and economical aspects. This is achieved by using the two fundamental laws of thermodynamics (the science that studies energy, its characteristics, and its transformations) through the use of the exergy concept, which is a measure of the energy quality and of its withdrawal with respect to the environment. The origins of the present-day technologies, regarding energy conservation, the short, medium and long term general strategies and the implementation stages of the integral programs of energy conservation are presented, and it concludes with a series of general policies aimed at making the energy conservation programs more congruent with the maintenance of a sustainable development. [Espanol] En este trabajo se presentan algunos aspectos fundamentales relacionados con los programas de ahorro de energia en general, y en la industria petrolera en particular, con objeto de lograr que los mismos sean integrales, es decir que consideren no solo los aspectos puramente energeticos, sino tambien los aspectos ecologicos y economicos. Esto se logra utilizando conjuntamente las dos leyes fundamentales de la termodinamica (la ciencia que estudia la energia, sus caracteristicas y sus transformaciones), mediante la utilizacion del concepto de exergia, que es una medida de la calidad de la energia y de su alejamiento con respecto al medio ambiente. Se presentan los origenes de las tendencias tecnologicas actuales en materia de ahorro de energia, las estrategias generales a corto, mediano y largo plazos y las etapas en la implementacion de programas integrales de ahorro de energia, para concluir con una serie de politicas generales tendientes a lograr que los programas de ahorro de energia sean congruentes con el

  10. US energy conservation and efficiency policies. Challenges and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, Robert K.; Onysko, Ganna [Global Environment Facility, Climate Change and Chemicals, 1818 H Street, NW, MSN G6-602, Washington, DC 20433 (United States); McGowan, Elizabeth; Scheer, Richard M. [Energetics Incorporated, 7067 Columbia Gateway Drive, Suite 200, Columbia, MD 21046 (United States)

    2010-11-15

    Expanding energy conservation and efficiency in every sector nationwide is one of the most cost-effective instruments for reducing US energy imports, the trade deficit and energy's environmental impacts. For these reasons, energy conservation and efficiency have been essential elements of US energy policy since the oil embargos and price spikes of the 1970s. The Energy Independence and Security Act of 2007 (EISA) is the latest federal legislation to expand and strengthen US energy conservation and efficiency policies, programs, and practices. Specifically, EISA and its recent predecessor, the Energy Policy Act of 2005 (EPAct05), contain almost 200 titles with new provisions for energy conservation and efficiency aimed at improvements in vehicle fuel economy. These provisions include efficiency of appliances and lighting; energy savings in residential, commercial, and government buildings; the efficiency of industrial manufacturing plants; and the efficiency of electric power delivery and end-use. These actions have begun to contribute to new federal, state, and local policies, programs, and practices across the US, and expectations are high for increases in the level of energy savings. This paper summarizes the history of US energy conservation and efficiency policies, outlines EISA's and EPAct05's key provisions, and considers prospects for the future. (author)

  11. US energy conservation and efficiency policies: Challenges and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, Robert K. [Global Environment Facility, Climate Change and Chemicals, 1818 H Street, NW, MSN G6-602, Washington, DC 20433 (United States); McGowan, Elizabeth [Energetics Incorporated, 7067 Columbia Gateway Drive, Suite 200, Columbia, MD 21046 (United States); Onysko, Ganna, E-mail: gonysko@thegef.or [Global Environment Facility, Climate Change and Chemicals, 1818 H Street, NW, MSN G6-602, Washington, DC 20433 (United States); Scheer, Richard M. [Energetics Incorporated, 7067 Columbia Gateway Drive, Suite 200, Columbia, MD 21046 (United States)

    2010-11-15

    Expanding energy conservation and efficiency in every sector nationwide is one of the most cost-effective instruments for reducing US energy imports, the trade deficit and energy's environmental impacts. For these reasons, energy conservation and efficiency have been essential elements of US energy policy since the oil embargos and price spikes of the 1970s. The Energy Independence and Security Act of 2007 (EISA) is the latest federal legislation to expand and strengthen US energy conservation and efficiency policies, programs, and practices. Specifically, EISA and its recent predecessor, the Energy Policy Act of 2005 (EPAct05), contain almost 200 titles with new provisions for energy conservation and efficiency aimed at improvements in vehicle fuel economy. These provisions include efficiency of appliances and lighting; energy savings in residential, commercial, and government buildings; the efficiency of industrial manufacturing plants; and the efficiency of electric power delivery and end-use. These actions have begun to contribute to new federal, state, and local policies, programs, and practices across the US, and expectations are high for increases in the level of energy savings. This paper summarizes the history of US energy conservation and efficiency policies, outlines EISA's and EPAct05's key provisions, and considers prospects for the future.

  12. US energy conservation and efficiency policies: Challenges and opportunities

    International Nuclear Information System (INIS)

    Dixon, Robert K.; McGowan, Elizabeth; Onysko, Ganna; Scheer, Richard M.

    2010-01-01

    Expanding energy conservation and efficiency in every sector nationwide is one of the most cost-effective instruments for reducing US energy imports, the trade deficit and energy's environmental impacts. For these reasons, energy conservation and efficiency have been essential elements of US energy policy since the oil embargos and price spikes of the 1970s. The Energy Independence and Security Act of 2007 (EISA) is the latest federal legislation to expand and strengthen US energy conservation and efficiency policies, programs, and practices. Specifically, EISA and its recent predecessor, the Energy Policy Act of 2005 (EPAct05), contain almost 200 titles with new provisions for energy conservation and efficiency aimed at improvements in vehicle fuel economy. These provisions include efficiency of appliances and lighting; energy savings in residential, commercial, and government buildings; the efficiency of industrial manufacturing plants; and the efficiency of electric power delivery and end-use. These actions have begun to contribute to new federal, state, and local policies, programs, and practices across the US, and expectations are high for increases in the level of energy savings. This paper summarizes the history of US energy conservation and efficiency policies, outlines EISA's and EPAct05's key provisions, and considers prospects for the future.

  13. Energy conservation prospects through electric load management

    Energy Technology Data Exchange (ETDEWEB)

    El-Shirbeeny, E H.T.

    1984-04-01

    In this paper, concepts of electric load management are discussed for effective energy conservation. It is shown that the conservation program must be comprehensive to provide solutions to the problems facing the electric consumer, the electric utility and the society by reducing the rate of growth of energy consumption and power system peak demand requirements. The impact of energy management programs on electric energy conservation is examined, with emphasis on efficiency, storage, cogeneration and controls with computers.

  14. Energy conservation employing membrane-based technology

    International Nuclear Information System (INIS)

    Narayanan, C.M.

    1993-01-01

    Membranes based processes, if properly adapted to industrial processes have good potential with regard to optimisation and economisation of energy consumption. The specific benefits of MBT (membrane based technology) as an energy conservation methodology are highlighted. (author). 6 refs

  15. Promoting household energy conservation

    International Nuclear Information System (INIS)

    Steg, Linda

    2008-01-01

    It is commonly assumed that households must change their behaviour to reduce the problems caused by increasing levels of fossil energy use. Strategies for behaviour change will be more effective if they target the most important causes of the behaviour in question. Therefore, this paper first discusses the factors influencing household energy use. Three barriers to fossil fuel energy conservation are discussed: insufficient knowledge of effective ways to reduce household energy use, the low priority and high costs of energy savings, and the lack of feasible alternatives. Next, the paper elaborates on the effectiveness and acceptability of strategies aimed to promote household energy savings. Informational strategies aimed at changing individuals' knowledge, perceptions, cognitions, motivations and norms, as well as structural strategies aimed at changing the context in which decisions are made, are discussed. This paper focuses on the psychological literature on household energy conservation, which mostly examined the effects of informational strategies. Finally, this paper lists important topics for future research

  16. Illinois energy conservation plan report: 1979 revision

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-02-01

    In response to Energy Policy and this Conservation Act (PL 94-163) and Energy Conservation and Production Act (PL 94-385), this paper describes the activities to be undertaken by Illinois to meet the mandatory requirements of the Acts and to carry out other activities to encourage energy conservation by energy-consuming sectors in the state. Programs reach the residential, commercial/industrial, agricultural, educational, transportation, and government sectors. The overall goal of the program is to reduce projected energy consumption in 1980 by 5% through information and educational activities.

  17. Selling energy conservation.

    Science.gov (United States)

    Hinrichsen, D

    1995-01-01

    This article concerns the Organization of the Petroleum Exporting Countries (OPEC) crisis and its impact on energy efficiency measures in the US. In 1985, when the OPEC collapsed, the US government had avoided the need to construct 350 gigawatts of new electric capacity. The most successful efficiency improvements, especially in household appliances and equipment, lighting and tightened energy efficiency standards in new buildings, resulted from the OPEC event. The real innovation of that time was the change in profit rules for utilities. This revolution and the way some US utilities view energy have not caught on elsewhere. Despite the initiative toward improving energy efficiency in homes, offices and industries, the change has been slow. Partly to blame are the big development banks, which pointed out that short-term conservation and efficiency measures could save at least 15% of the total energy demand without the need for major investment. The benefits of energy conservation was shown during the oil shock when per capita energy consumption fell by 5% in the member states of the Organization of Economic Cooperation and Development, while the per capita gross domestic product grew by a third. There has been a decrease in energy expenditure worldwide, and the scope for further energy savings is enormous, but governments need to recognize and seize the opportunity.

  18. Energy-conserving programming of VVI pacemakers: a telemetry-supported, long-term, follow-up study.

    Science.gov (United States)

    Klein, H H; Knake, W

    1990-06-01

    Thirty patients with VVI pacemakers (Quantum 253-09, 253-19, Intermedics Inc., Freeport, TX) were observed for a mean of 65 months. Within 12 months after implantation, optimized output programming was performed in 29 patients. This included a decrease in pulse amplitude (22 patients), pulse width (4 patients), and/or pacing rate (11 patients). After 65 months postimplantation, telemetered battery voltage and battery impedance were compared with the predicted values expected when the pulse generator constantly stimulates at nominal program conditions (heart rate 72.3 beats/min, pulse amplitude 5.4 V, pulse width 0.61 ms). Instead of an expected cell voltage of 2.6 V and a cell impedance of 10 k omega mean telemetered values amounted to 2.78 V and 1.4 k omega, respectively. These data correspond to a battery age of 12-15 months at nominal program conditions. This long-term follow-up study suggests that adequate programming will extend battery longevity and thus pulse generator survival in many patients.

  19. Energy conservation. A goal for Albertans

    Energy Technology Data Exchange (ETDEWEB)

    Zwicky, L

    1988-01-01

    In late 1985, the Public Advisory Committees to the Environmental Council of Alberta began working toward a draft conservation strategy for Alberta. A prospectus was published and meetings and workshops held, the goal being a conservation strategy in place by 1992. This report is one of a series of discussion papers on relevant sectors such as agriculture, fish and wildlife, tourism, and various specific energy sources. This report focuses on energy use in general in the province, including the role of energy conservation in a conservation strategy, the potential for energy conservation, barriers, actions to encourage conservation, the impacts of conserving energy, and the next steps to take. 3 figs., 1 tab.

  20. Organizational determinants of energy-conservation management

    Energy Technology Data Exchange (ETDEWEB)

    Selmer, J. (Hong Kong Baptist Coll., Kowloon (Hong Kong). Dept. of Management)

    1994-10-01

    Energy-conservation activities require new functional and technical activities in all participating organizations and the prospects of effectively managing such activities are contingent upon the specific organizational setting. Based on a previous large-scale investigation in which we identified five organizational archetypes, in-depth longitudinal case studies were undertaken of five organizations in Sweden during 5 years, each organization representing a different archetype. The five organizations have distinct organizational prerequisites and separate basic motivations to engage and succeed in energy-conservation management. Implications for government policy and managerial action are discussed in detail. (author)

  1. Energy conservation. Ambitions and results

    International Nuclear Information System (INIS)

    2011-01-01

    From results of monitoring it is shown that energy conservation in the Netherlands is behind the ambitions of the Dutch government. The Dutch Court of Audit examined the reasons why energy conservation targets are not met and what the consequences are for the national and European energy and climate goals for 2020. Also the Dutch Court of Audit looked at the possibilities to make energy saving policies more effective. [nl

  2. Facts about industrial energy conservation in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Vaughan, William A.

    1979-07-01

    The story of energy conservation in the US with particular emphasis on industry is presented. Then, the energy conservation program in General Motors including organization, plant guidelines, communication and motivation techniques, successful case histories, and some concepts for future savings is described in detail. (MCW)

  3. Canada's voluntary industrial energy conservation programme

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, Jr., C. A.

    1979-07-01

    The organization of the voluntary industrial energy conservation program is described. There are 15 industrial sectors in the program and the plan implemented by the sectors including individual companies, trade associations, industry task forces, task force coordinating committee, and government is described. Targets for attack are mainly housekeeping projects, energy efficiency in retrofitting, and new processes. Problems are identified. It is concluded that compiled total performance has essentially achieved its target of 12% improved energy efficiency two years ahead of schedule. (MCW)

  4. Energy Conservation Guidebook : to be Used in Conjunction with the Energy Conservation Policies October 1993.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1993-11-01

    This guidebook is an instrument for implementing BPA`s Energy Conservation Policies established through the concensus of the four Area Office Managers and the Assistant Administrator for the Office of Energy Resources. As technical support for, and elaboration of, the Energy Conservation Policies, the Guidebook follows the format of the Policies themselves. The Guidebook tackles each section of the Policies in order, again assigning roles and responsibilities where appropriate, enlarging on policy issues and, where appropriate, outlining data considerations. The sections in order are: conservation load reduction, cost-effectiveness limits, BA management targets, consumer contributions, utility contribution, program verification, and program evaluation.

  5. Energy conservation in India: a profile

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The decade and half since the oil crisis of 1973 has been a period that has witnessed a steady growth of the energy conservation ethos in India. Housekeeping and low risk conservation options have been largely preferred so far. The IMWG (Inter-Ministerial Working Group on Utilization and Conservation of Energy) study did not evaluate potential saving through the introduction of high risk and high pay-off technologies. The potential for energy conservation in India is substantial. However, some of the barriers to achieving the potential in the past have been energy prices which deviate from rational tariffs and prices, a lack of information on specific measures and of options for achieving energy conservation, paucity of capital for schemes requiring technology upgradation and efficiency improvements, and the inadequacy if institutional arrangement for promoting energy conservation in different sectors of the economy. Recent efforts pursued by several organizations however provide some basis for optimism. Given the growing capital intensity of the energy sector in India, more vigorous efforts are likely to be made in the future. In particular, success stories in some industrial units indicate that decentralized efforts by the units themselves can achieve a great deal in improving the efficiency of energy use, particularly in the Indian industry. Policies to promote such programmes would help accelerate energy conservation efforts in industrial units and in other sectors. It is therefore hoped that the intensity of energy use in several sectors of the indian economy will be reduced significantly in the coming years. (author). 3 refs., 3 tabs

  6. Analysis of sectoral energy conservation in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Al-Mofleh, Anwar; Taib, Soib; Salah, Wael [School of Electrical and Electronics Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia); Mujeebu, M. Abdul [School of Mechanical Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

    2009-06-15

    The electrical energy consumption in Malaysia has increased sharply in the past few years, and modern energy efficient technologies are desperately needed for the national energy policy. This article presents a comprehensive picture of the current status of energy consumption and various energy conservation options viable for Malaysian environment. A detailed survey is made to assess the consumption pattern and the existing techniques for energy efficiency. Based on the survey, the feasibility of improving the available systems and adopting new programs in different sectors is investigated. The study reveals the fact that the energy conservation policy of the country has been fairly improved in the last ten years. However the country has to pay more attention to this area and make urgent measures to adopt more energy efficient technologies in various sectors. (author)

  7. Analysis of sectoral energy conservation in Malaysia

    International Nuclear Information System (INIS)

    Al-Mofleh, Anwar; Taib, Soib; Mujeebu, M. Abdul; Salah, Wael

    2009-01-01

    The electrical energy consumption in Malaysia has increased sharply in the past few years, and modern energy efficient technologies are desperately needed for the national energy policy. This article presents a comprehensive picture of the current status of energy consumption and various energy conservation options viable for Malaysian environment. A detailed survey is made to assess the consumption pattern and the existing techniques for energy efficiency. Based on the survey, the feasibility of improving the available systems and adopting new programs in different sectors is investigated. The study reveals the fact that the energy conservation policy of the country has been fairly improved in the last ten years. However the country has to pay more attention to this area and make urgent measures to adopt more energy efficient technologies in various sectors.

  8. Energy conservation applications of microprocessors

    Energy Technology Data Exchange (ETDEWEB)

    Shih, James Y.

    1979-07-01

    A survey of the application of microprocessors for industrial and commercial energy conservation has been made. Microprocessor applications for HVAC, chiller control, and automotive equipment are discussed. A case study of successful replacement of a conventional cooling plant control is recounted. The rapid advancement of microelectronic technology will affect efficient energy control, more sophisticated control methodology, and more investment in controls.

  9. Energy conservation and petroleum substitution

    Energy Technology Data Exchange (ETDEWEB)

    Kebbekus, J; Kraft-Woelfel, G

    1982-04-01

    Shortage and price increases for energy have caused large population groups to give new thought to the subject. For the knowledge on energy necessary to make a decision, ultimate consumers mostly rely on their social environment, personal contacts and the media. Important information on energy conservation should be provided by regional electric utilities. A concept for this purpose is discussed.

  10. Energy conservation in rented buildings

    Energy Technology Data Exchange (ETDEWEB)

    Klingberg, T.; Broechner, J.; Forsman, J.; Gaunt, L.; Holgersson, M.

    1984-08-01

    The bulletin is an anthology of nine essays by different authors addressing the issue of energy conservation in buildings, where there exists a landlord/tenant relationship. After an overview of the rental market and the stock of rental buildings different types of rental contracts and energy charges are described.

  11. Evolution and results of the energy conservation programs in PEMEX-REFINACION; Evolucion y resultados de los programas de ahorro de energia en PEMEX-REFINACION

    Energy Technology Data Exchange (ETDEWEB)

    Machado Soberanes, J.A. [PEMEX-REFINACION, Mexico, D. F. (Mexico)

    1995-12-31

    The nature of the industrial activities of PEMEX-REFINACION aimed at the energy production area in the refineries of the system, requires for its operation of an energy consumption that represents a highly significant amount among its total operation costs. These energy costs are being reduced in figures higher than 50% in 1990 to 43% in 1993 through coordination programs and investments oriented to the efficient use of energy and losses control. This paper presents the historical description of the developments, advances and achievements that have been obtained up to date in this subject in the production plant of PEMEX-REFINACION, beginning with the intensification of the program of energy conservation and efficient use of energy in 1990. As a substantial part of this paper the different actions being applied are listed right from the beginning of the program with their corresponding cost-benefit analysis, in order to eliminate the energy wastes that correspond fundamentally to short term measures requiring minimum investments and medium term actions with moderate investments. Likewise, the plan of action to be implemented is presented for the operation optimization of the system and the existing equipment, with the long term actions that for their execution require of large investments. The efforts made in the last 4 years in the system oil refineries have been important, which has been reflected in the reduction of energy consumption in an average of 10,000 equivalent barrels of oil (EBCO) per day; nevertheless there are still great opportunity areas to reach the energy efficiency levels and profitability of the world leading refineries, which is consistent with the conceptual frame of the 1995- 2000 business plan structured for PEMEX-REFINACION. [Espanol] La naturaleza misma de las actividades industriales de PEMEX-REFINACION, enfocada al area de produccion de energeticos en las refinerias del sistema, requiere para sus operaciones de un consumo de energia que

  12. Evolution and results of the energy conservation programs in PEMEX-REFINACION; Evolucion y resultados de los programas de ahorro de energia en PEMEX-REFINACION

    Energy Technology Data Exchange (ETDEWEB)

    Machado Soberanes, J A [PEMEX-REFINACION, Mexico, D. F. (Mexico)

    1996-12-31

    The nature of the industrial activities of PEMEX-REFINACION aimed at the energy production area in the refineries of the system, requires for its operation of an energy consumption that represents a highly significant amount among its total operation costs. These energy costs are being reduced in figures higher than 50% in 1990 to 43% in 1993 through coordination programs and investments oriented to the efficient use of energy and losses control. This paper presents the historical description of the developments, advances and achievements that have been obtained up to date in this subject in the production plant of PEMEX-REFINACION, beginning with the intensification of the program of energy conservation and efficient use of energy in 1990. As a substantial part of this paper the different actions being applied are listed right from the beginning of the program with their corresponding cost-benefit analysis, in order to eliminate the energy wastes that correspond fundamentally to short term measures requiring minimum investments and medium term actions with moderate investments. Likewise, the plan of action to be implemented is presented for the operation optimization of the system and the existing equipment, with the long term actions that for their execution require of large investments. The efforts made in the last 4 years in the system oil refineries have been important, which has been reflected in the reduction of energy consumption in an average of 10,000 equivalent barrels of oil (EBCO) per day; nevertheless there are still great opportunity areas to reach the energy efficiency levels and profitability of the world leading refineries, which is consistent with the conceptual frame of the 1995- 2000 business plan structured for PEMEX-REFINACION. [Espanol] La naturaleza misma de las actividades industriales de PEMEX-REFINACION, enfocada al area de produccion de energeticos en las refinerias del sistema, requiere para sus operaciones de un consumo de energia que

  13. 10 CFR 431.446 - Small electric motors energy conservation standards and their effective dates. [Reserved

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Small electric motors energy conservation standards and... CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Small Electric Motors Energy Conservation Standards § 431.446 Small electric motors energy conservation standards and their...

  14. Potential for energy-conserving capital equipment in UK industries

    Energy Technology Data Exchange (ETDEWEB)

    Fawkes, S D

    1986-01-01

    A summary is given of recent research into the potential for energy-conserving capital equipment in UK industries. The research had significant findings regarding the feasibility of achieving low-energy scenarios. It also stressed the importance of site specific factors in inhibiting incremental technical change such as that common in energy-conservation investments, developed a soft systems model of energy-management activities and investigated current progress and management styles in the brewing, malting, distilling and dairy sectors.

  15. Energy audit for energy conservation

    International Nuclear Information System (INIS)

    Kanetkar, V.V.

    1996-01-01

    Energy audit is a very effective management tool for betterment of plant performance. The energy audit has a problem solving approach rather than a fault finding technique. The energy conservation is a rational use of energy. It has been the experience of the developed countries that energy is one issue which results into cost savings with relatively much less efforts/cost in comparison with other resources used in production, development and adoption of energy efficiency equipment and practices in most of production process has been the result of same technique. (author). 1 tab

  16. Consumer energy conservation options - professional and consumer perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Ritchie, B.J.R.; Claxton, J.D.; McDougall, G.H.G.

    1980-01-01

    The objectives of this study were to: identify government policies for reducing Canadian consumption of home heating fuel, electricity, and gasoline; assess probable effectiveness of different policy alternatives as a means of reducing consumer energy consumption; and measure the acceptability to Canadian consumers of the different policy alternatives. Interviews were conducted with energy conservation professionals to identify and evaluate existing energy conservation programs, and interviews were conducted with consumers who had evaluated selected programs previously reviewed by the professionals. Information was also gathered on energy conservation activities of consumers surveyed. A directory of 34 energy conservation programs was also compiled. Some of the conclusions reached in this report are as follows. There is a need for an information system to gather data on existing conservation programs in order to increase the knowledge of relevant parties as to the outcomes of operating programs. This would help evaluation and improvement of current programs and suggest new program possibilities. The professionals rated six of the 34 programs highly, including the Energuide and the Canadian Home Insulation Program (CHIP). Retrofitting programs for houses are recommended for continuation and expansion, with some consideration given to linking these kinds of programs with home audit programs. In the private transport sector, any new conservation programs should be thoroughly tested on a small scale before widespread implementation, as evidence indicates that certain programs favorably evaluated by professionals may not be received favorably by consumers. 3 refs., 24 tabs.

  17. Program of actions for energy conservation in the equipment for the urban public transportation; Programa de acciones para el ahorro de la energia en los equipos de transporte publico urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Sanhez Arellano, L.I. [Facultad de Ingenieria, Universidad Autonoma del Estado de Mexico, Toluca (Mexico)

    1995-12-31

    The Facultad de Ingenieria of the Universidad Autonoma del Estado de Mexico (UAEM), in its postgraduate program in Transport Engineering carries out research projects aimed at the appropriate operation of the urban public transportation, in the definition of the transportation networks and their exploitation as well as in the energy conservation and efficient use of the energy for its operation. This paper embodies the lines of interest of this program. The proper operation characteristics and the energy consumption of the different types of vehicles used in urban public transportation mainly depend on the application they have been designed for. Nevertheless, an important point is to know, in the most concrete and specific form, the nature and other possible utilization options of the different urban transportation systems, as well as its energy impact and the possibility of a well oriented energy conservation. The purpose of this paper is to present in a concrete manner the different types of vehicles used in the urban public transportation, making an energy comparison, besides setting forth a program of actions tending to the energy saving for the vehicles that nowadays operate in the main cities of our country. The main actions are pointed out and the basic characteristics for their initiation, which can be summarized in three large groups: -action in the proper enterprises and with existing vehicular park. -actions over the management and exploitation of the transportation systems. -action for the utilization of new equipment and more efficient vehicles. A detailed explanation of each one of these actions and their impact on the energy consumption are the final purpose of this study. [Espanol] La Facultad de Ingenieria de la Universidad Autonoma del Estado de Mexico (UAEM), dentro de su programa de Postrado en Ingenieria del Transporte realiza proyectos de investigacion tendientes en la buena operacion de los transportes publicos urbanos, en la definicion de

  18. Program of actions for energy conservation in the equipment for the urban public transportation; Programa de acciones para el ahorro de la energia en los equipos de transporte publico urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Sanhez Arellano, L I [Facultad de Ingenieria, Universidad Autonoma del Estado de Mexico, Toluca (Mexico)

    1996-12-31

    The Facultad de Ingenieria of the Universidad Autonoma del Estado de Mexico (UAEM), in its postgraduate program in Transport Engineering carries out research projects aimed at the appropriate operation of the urban public transportation, in the definition of the transportation networks and their exploitation as well as in the energy conservation and efficient use of the energy for its operation. This paper embodies the lines of interest of this program. The proper operation characteristics and the energy consumption of the different types of vehicles used in urban public transportation mainly depend on the application they have been designed for. Nevertheless, an important point is to know, in the most concrete and specific form, the nature and other possible utilization options of the different urban transportation systems, as well as its energy impact and the possibility of a well oriented energy conservation. The purpose of this paper is to present in a concrete manner the different types of vehicles used in the urban public transportation, making an energy comparison, besides setting forth a program of actions tending to the energy saving for the vehicles that nowadays operate in the main cities of our country. The main actions are pointed out and the basic characteristics for their initiation, which can be summarized in three large groups: -action in the proper enterprises and with existing vehicular park. -actions over the management and exploitation of the transportation systems. -action for the utilization of new equipment and more efficient vehicles. A detailed explanation of each one of these actions and their impact on the energy consumption are the final purpose of this study. [Espanol] La Facultad de Ingenieria de la Universidad Autonoma del Estado de Mexico (UAEM), dentro de su programa de Postrado en Ingenieria del Transporte realiza proyectos de investigacion tendientes en la buena operacion de los transportes publicos urbanos, en la definicion de

  19. Nonprice incentives and energy conservation.

    Science.gov (United States)

    Asensio, Omar I; Delmas, Magali A

    2015-02-10

    In the electricity sector, energy conservation through technological and behavioral change is estimated to have a savings potential of 123 million metric tons of carbon per year, which represents 20% of US household direct emissions in the United States. In this article, we investigate the effectiveness of nonprice information strategies to motivate conservation behavior. We introduce environment and health-based messaging as a behavioral strategy to reduce energy use in the home and promote energy conservation. In a randomized controlled trial with real-time appliance-level energy metering, we find that environment and health-based information strategies, which communicate the environmental and public health externalities of electricity production, such as pounds of pollutants, childhood asthma, and cancer, outperform monetary savings information to drive behavioral change in the home. Environment and health-based information treatments motivated 8% energy savings versus control and were particularly effective on families with children, who achieved up to 19% energy savings. Our results are based on a panel of 3.4 million hourly appliance-level kilowatt-hour observations for 118 residences over 8 mo. We discuss the relative impacts of both cost-savings information and environmental health messaging strategies with residential consumers.

  20. Energy conservation using face detection

    Science.gov (United States)

    Deotale, Nilesh T.; Kalbande, Dhananjay R.; Mishra, Akassh A.

    2011-10-01

    Computerized Face Detection, is concerned with the difficult task of converting a video signal of a person to written text. It has several applications like face recognition, simultaneous multiple face processing, biometrics, security, video surveillance, human computer interface, image database management, digital cameras use face detection for autofocus, selecting regions of interest in photo slideshows that use a pan-and-scale and The Present Paper deals with energy conservation using face detection. Automating the process to a computer requires the use of various image processing techniques. There are various methods that can be used for Face Detection such as Contour tracking methods, Template matching, Controlled background, Model based, Motion based and color based. Basically, the video of the subject are converted into images are further selected manually for processing. However, several factors like poor illumination, movement of face, viewpoint-dependent Physical appearance, Acquisition geometry, Imaging conditions, Compression artifacts makes Face detection difficult. This paper reports an algorithm for conservation of energy using face detection for various devices. The present paper suggests Energy Conservation can be done by Detecting the Face and reducing the brightness of complete image and then adjusting the brightness of the particular area of an image where the face is located using histogram equalization.

  1. Seeding Social Norms about Energy Conservation among Girl Scouts

    Science.gov (United States)

    Bernstein, Debra; Puttick, Gillian

    2014-01-01

    Three studies examined whether a social norm message (SNM) to Girl Scouts who had completed an energy conservation program would impact behavior and attitudes. Studies 1 and 2 were conducted with girls recently completing the program, study 3 was conducted with girls completing the program one year earlier. Results suggest that the SNM may impact…

  2. Energy conservation by reducing process variability

    Energy Technology Data Exchange (ETDEWEB)

    Wising, Ulrika; Lafourcade, Sebastien [Pepite S.A., Liege (Belgium); Mack, Philippe [Pepite Technologies Inc., Montreal (Canada)

    2011-12-21

    Energy conservation is becoming an increasingly important instrument to stay competitive in today is increasingly global market. Important investments have been made in infrastructure and personnel in order to improve the management of energy such as increased metering, energy dashboards, energy managers, etc. Despite these investments, the results have not materialized and there is still a significant potential to further reduce energy consumption. In this paper a new methodology will be presented that helps industry better operate existing assets in order to reduce energy consumption, without having to make capital investments. The methodology uses a combination of advanced data analysis tools and a specific implementation scheme that has lead to significant savings in industry. The advanced data analysis tools are used to analyze the variability of the process in order to assess when the plant has been operated well or not so well in the past. By finding the root causes of these variations and the key variables that can explain them, improved operating guidelines and models can be developed and implemented. The specific implementation scheme is an important part of the methodology as it involves the people operating the plant. Several user cases will be presented showing an energy conservation of between 10%-20% without capital investments necessary. (author)

  3. Psychological dimensions of Energy Conservation

    Directory of Open Access Journals (Sweden)

    Tonello, Graciela

    2012-12-01

    Full Text Available One of the most serious current environmental problems is the depletion of non renewable natural resources. The vast majority of our daily actions involve the consumption of energy and they increase the problem. Environmental psychology studies the psychological motivations that determine pro-ecological behaviour. In this context the aim of this review was to determine which psychological models and variables are better descriptors of residential energy conservation, comparing the predictive power of different models related to behaviour, residential consumption as well as to the acceptability of energy policies. Results suggest that energy saving is mainly linked to altruistic motivations, followed by egoistic reasons and in a minor way to environmental concerns. People would act according to these dimensions when contextual conditions are perceived as appropriate.

  4. Personality traits and energy conservation

    International Nuclear Information System (INIS)

    Shen, Meng; Cui, Qingbin; Fu, Liping

    2015-01-01

    As a cost-effective solution to energy conservation, behavior based method focuses on changing people's behavior through normative feedback for energy efficiency. While the application of behavior-based method is promising, the challenge exists to achieve efficiently sustainable behavioral change. Based on multi-period observation of energy behavior at the Joint Base Andrews in Maryland, this paper presents a model-based approach aimed to improve the nationally popular and deep-seated benchmark setting strategy for normative feedback used in home energy reports. The improved approach has its merits of countering the undesirable boomerang effect and enhancing the effectiveness of normative feedback targeting different personalities. By introducing a modified opinion dynamics model, this paper simulates the process of energy behavior change and therefore identifies the driver and elementary rules of behavioral change. In particular, the paper defines various behavioral zones in accordance with people's personality and proposes a new customized energy reporting mechanism that maps normative benchmark to personality trait. The new energy reporting policy has strong industrial implication for promoting behavior-based method towards a sustained energy conservation movement. -- Highlights: •We explore the personality driving resident behavior change under peer pressure. •We map the distribution of behavior clusters driven by personality and benchmarks. •The model is tested using data from an experiment conducted in Maryland, U.S. •The population exposed to normative feedback can be divided into six categories. •A personality trait-based home energy reporting mechanism is proposed

  5. Non conventional energy sources and energy conservation

    International Nuclear Information System (INIS)

    Bueno M, F.

    1995-01-01

    Geographically speaking, Mexico is in an enviable position. Sun, water, biomass and geothermal fields main non conventional energy sources with commercial applications, are presents and in some cases plentiful in national territory. Moreover the coastal tidal power which is in research stage in several countries. Non conventional energy sources are an alternative which allow us to reduce the consumption of hydrocarbons or any other type of primary energetic, are not by oneself choices for the energy conservation, but energy replacements. At the beginning of this year, CONAE created the Direction of Non conventional Energy Sources, which main objective is to promote and impulse programs inclined towards the application of systems based in renewable energy sources. The research centers represent a technological and consultative support for the CONAE. They have an infrastructure developed along several years of continuous work. The non conventional energy sources will be a reality at the same time that their cost be equal or lower than the cost for the traditional generating systems. CONAE (National Commission for Energy Conservation). (Author)

  6. Identification of energy conservation research opportunities: a review and synthesis of the literature

    Energy Technology Data Exchange (ETDEWEB)

    Hopp, W.J.; Hane, G.J.; Gurwell, W.E.; Hauser, S.G.; Williford, R.E.; Williams, T.A.; Ashton, W.B.

    1982-03-01

    Thirty-eight studies of energy conservation research opportunities are reviewed. The 38 studies chosen for review include many of the major efforts in the identification of energy conservation research and development (R and D) opportunities and provide a representative sample of the types of studies that have been performed. The sample includes studies that focus on specific energy use (e.g., auto transport), as well as studies that focus on specific types of research (e.g., materials science). The sample also includes studies that can be further contrasted in terms of long-term vs. short-term projects, evolutionary vs. revolutionary ideas, generic vs. process-specific activities, and technology base research vs. hardware development. Each of these perspectives contributes toward assuring coverage of the breadth of energy conservation R and D opportunities. In each review the technical or end-use focus is described, the research ideas identified in the study are listed, and a critical summary is given. The reviews also indicate whether the studies present end-use consumption data, estimate potential energy savings, estimate times to commercialization, summarize existing research programs, or describe the identification methodology. In Section 2.0 the various research studies are compared. In Section 3.0 the characteristics of an aggregate list of research ideas are discussed. The characteristics were collected from the research opportunities studies, which are included in Appendix A. Appendix A contains a compilation of energy conservation R and D opportunities arranged by energy end-use applications. Appendix B contains an outline of the format followed in writing the critical reviews of the studies, the individual study reviews, and the extended bibliography of 88 studies that describe energy conservation research opportunities.

  7. Increasing organizational energy conservation behaviors: Comparing the theory of planned behavior and reasons theory for identifying specific motivational factors to target for change

    Science.gov (United States)

    Finlinson, Scott Michael

    Social scientists frequently assess factors thought to underlie behavior for the purpose of designing behavioral change interventions. Researchers commonly identify these factors by examining relationships between specific variables and the focal behaviors being investigated. Variables with the strongest relationships to the focal behavior are then assumed to be the most influential determinants of that behavior, and therefore often become the targets for change in a behavioral change intervention. In the current proposal, multiple methods are used to compare the effectiveness of two theoretical frameworks for identifying influential motivational factors. Assessing the relative influence of all factors and sets of factors for driving behavior should clarify which framework and methodology is the most promising for identifying effective change targets. Results indicated each methodology adequately predicted the three focal behaviors examined. However, the reasons theory approach was superior for predicting factor influence ratings compared to the TpB approach. While common method variance contamination had minimal impact on the results or conclusions derived from the present study's findings, there were substantial differences in conclusions depending on the questionnaire design used to collect the data. Examples of applied uses of the present study are discussed.

  8. Energy conservation and cost benefits in the dairy processing industry

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-01

    Guidance is given on measuring energy consumption in the plant and pinpointing areas where energy-conservation activities can return the most favorable economics. General energy-conservation techniques applicable to most or all segments of the dairy processing industry, including the fluid milk segment, are emphasized. These general techniques include waste heat recovery, improvements in electric motor efficiency, added insulation, refrigeration improvements, upgrading of evaporators, and increases in boiler efficiency. Specific examples are given in which these techniques are applied to dairy processing plants. The potential for energy savings by cogeneration of process steam and electricity in the dairy industry is also discussed. Process changes primarily applicable to specific milk products which have resulted in significant energy cost savings at some facilities or which promise significant contributions in the future are examined. A summary checklist of plant housekeeping measures for energy conservation and guidelines for economic evaluation of conservation alternatives are provided. (MHR)

  9. Energy conservation-problems and perspectives for developing nations

    Energy Technology Data Exchange (ETDEWEB)

    Srinivasan, P. R. [National Productivity Council, New Delhi, India; Padrmanabhan, S.

    1980-03-15

    While studies of the past indicated a tight coupling of energy consumption and GNP, longer range indications are that they can be mutually decoupled. Developing nations can move forward towards achieving significant energy savings in their economics without fear of economic stagnation. Conservation policies at the national level are difficult to enunciate and the implementation mechanisms have to be strengthened. Macro-level economics may not be easily apparent as unit level economics. If energy conservation is not practiced, we would require the development of additional energy supply capacity with all of its economic implications. The role of science and technology inputs in industrial processes for minimizing energy consumption is significant. Sufficient funds should be allocated for pursuance of R and D activities in energy conservation and in developing alternative energy resources to supplement and later replace the existing costly transient fuels. A climate to promote conservation of energy should formulate policies which lays emphasis on energy conservation strategies rather than soley on energy growth issues. The effort should be directed towards energy programs that are a judicious mix up of energy and energy conservation strategies for achieving economic growth and a reasonable standard of living commensurate with the aspirations of the people. In capital-scarce economies, an account of the fact that energy conservation requires far less investment than energy capital supplies, conservation policies must play a central role in the overall framework of developing nation's national energy policies.

  10. Energy conservation potential of surface modification technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le, H.K.; Horne, D.M.; Silberglitt, R.S.

    1985-09-01

    This report assesses the energy conservation impact of surface modification technologies on the metalworking industries. The energy conservation impact of surface modification technologies on the metalworking industries is assessed by estimating their friction and wear tribological sinks and the subsequent reduction in these sinks when surface modified tools are used. Ion implantation, coatings, and laser and electron beam surface modifications are considered.

  11. Energy conservation at the Nippon Steel Corporation

    Energy Technology Data Exchange (ETDEWEB)

    Ishihara, Shigetoshi

    1979-07-01

    Characteristics of the Japanese energy demand-supply structure are discussed. Nippon Steel's energy consumption and energy conservation measures are discussed. Results of Nippon's energy conservation activities are summarized. Additional information on the Japanese short-range measures for the reduction in oil consumption, the effect of efforts for the reduction of petroleum consumption, and concrete measures for securing the effect is included.

  12. A Compendium of Energy Conservation Success Stories

    Science.gov (United States)

    1988-09-01

    Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office{endash}Energy Utilization Research{endash}sponsors research and technical inventions for all end-use sectors.

  13. A compendium of energy conservation success stories

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office/endash/Energy Utilization Research/endash/sponsors research and technical inventions for all end-use sectors.

  14. An empirical study on the institutional factors of energy conservation and emissions reduction: Evidence from listed companies in China

    International Nuclear Information System (INIS)

    Zhang, Zhaoguo; Jin, Xiaocui; Yang, Qingxiang; Zhang, Yi

    2013-01-01

    Corporate excessive energy consumption and emissions are negative externality problems, with the basic countermeasure of establishing a series of institutional programs to promote corporate energy conservation and emissions reduction. This paper analyzes the influence of institutional factors such as laws, tax policies, credit policies, government subsidies, media supervision and marketization degree on corporate energy conservation and emissions reduction from the institutional perspective. The data, from 84 listed Chinese chemical and steel companies from 2006 to 2010, was analyzed using both a fixed effect model and the generalized method of moments (GMM) model. The empirical results demonstrate that these institutional factors positively affect corporate energy conservation and emissions reduction. Specifically, four factors – tax policies, government subsidies, credit policies and media supervision – have a significant positive relationship with corporate energy conservation and emissions reduction; whereas laws and marketization degree exhibit no significant effects. The research findings are theoretically and practically significant to the Chinese government with regard to improving the institutional environment and promoting corporate energy conservation and emissions reduction. - Highlights: ► Theoretical analysis of the influence of institutional factors based on NIE. ► Empirical analysis of the influence of institutional factors on ECER by regression. ► Economic measures and public opinions have positive influence on ECER in China. ► Laws and the degree of marketization have weak influence on ECER in China

  15. Energy conservation in French industry and at Rhone-Poulenc

    Energy Technology Data Exchange (ETDEWEB)

    Mongon, A.

    1979-07-01

    Thirteen examples are given to illustrate France's energy conservation program. The examples show the most efficient way of energy sources management, the application of the process optimization's method, and the use of control equipment for process and heating. The details on how energy is used rationally at Rhone-Poulenc are presented.

  16. Basic Energy Conservation and Management--Part 2: HVAC

    Science.gov (United States)

    Krueger, Glenn

    2012-01-01

    Reducing school district energy expenditures has become a universal goal, and new technologies have brought greater energy efficiencies to the school environment. In Part 1 of this two-part series, the author discussed the steps required to establish an energy conservation and management program with an emphasis on lighting. In this article, he…

  17. Energy conservation, efficiency and energy audit

    International Nuclear Information System (INIS)

    Sharma, R.A.

    2006-01-01

    In this paper the author discusses the conservation, efficiency, audit, fundamentals, differences and methods, the objectives of energy conservation, definitions of energy audit, scope, short term, medium term and long term measures to be taken for conservation are discussed

  18. Energy Costs and Energy Conservation Programs in Colleges and Universities: 1972-73, 1974-75. Higher Education Panel Reports, Number 31.

    Science.gov (United States)

    Atelsek, Frank J.; Gomberg, Irene L.

    A survey was initiated at the request of the U.S. Office of Education and the Energy Task Force to: (1) measure the increase in energy expenditures since the OPEC oil embargo of 1973-74; (2) assess changes in energy consumption over a two-year period; and (3) examine some of the specific conservation practices of higher education institutions.…

  19. Department of Energy workshops on industrial energy conservation reporting

    Energy Technology Data Exchange (ETDEWEB)

    Harvey, Douglas G.

    1979-01-01

    A voluntary industrial energy-conservation program was initiated and now includes 50 trade organizations representing over 3,000 companies. Their current reporting system is an effort to respond to the Energy Policy and Conservation Act requirements, as now modified by the National Energy Conservation Policy Act. DOE's Office of Industrial Programs held six workshops in various key locations between November 1978 and February 1979 to enable energy managers to develop ideas and make suggestions that would improve the current and future energy-reporting programs. This report is a summary of the wide range of recommendations that the workshop participants offered as a means of meeting the NECPA requirements and the criticism of the current reporting program. It also reflects industry's views on potential approaches to future reporting. (MCW)

  20. Reduced energy conservation law for magnetized plasma

    International Nuclear Information System (INIS)

    Sosenko, P.P.; Decyk, V.K.

    1994-01-01

    A global energy conservation law for a magnetized plasma is studied within the context of a quasiparticle description. A reduced energy conservation law is derived for low-frequency, as compared to the gyromagnetic frequency, plasma motions with regard to both non-uniform mean flows and fluctuations in the plasma. The mean value of plasma energy is calculated and sufficient stability conditions for non-equilibrium plasmas are derived. (orig.)

  1. Estimating energy conservation patterns of Greek households

    International Nuclear Information System (INIS)

    Sardianou, Eleni

    2007-01-01

    This paper develops an empirical model to investigate the main determinants of household energy conservation patterns in Greece employing cross-section data. In the empirical analysis, household energy-conserving choices models are employed, using a discrete and a latent trait variable respectively as a dependent variable. The results show that socio-economic variables such as consumers' income and family size are suitable to explain differences towards energy conservation preferences. In addition, the results suggest that electricity expenditures and age of the respondent are negatively associated with the number of energy-conserving actions that a consumer is willing to adopt. Finally, other variables such as environmental information feedback and consciousness of energy problems are characteristics of the energy-saver consumer. By evaluating consumer's decision-making process with regards to energy conservation measures, we are able to formulate and propose an effective energy conservation framework for Greece. An energy policy framework is among the main prerequisites not only to achieve sustainable development but also to maintain consumers' quality of life

  2. An analysis of energy conservation measure costs

    International Nuclear Information System (INIS)

    Jones, R.; Ellis, R.; Gellineau, D.

    1990-01-01

    This paper reports on a Denver Support Office project to evaluate cost estimation in the Institutional Conservation Program. Unit cost characteristics and cost prediction accuracy were evaluated from 1,721 Energy Conservation Measures (ECMs) and 390 Technical Assistance (TA) reports funded in the last six years. This information is especially useful to state and DOE review engineers in determining the reasonableness of future cost estimates. The estimated cost provisions for TA report grants were generally adequate to cover the actual costs. Individually, there was a tendency for TA reports to cost less than estimated by about 10%. TA report unit costs averaged $.09 to $.11 per square foot, and decreased as the building size increased. Individually, there was a tendency for ECMs to cost more than estimated by about 17%. Overall, the estimated costs of the 1,721 measures were $20.4 minion, while the actual costs were $21.4 million. This 4.6% difference indicates that, overall, ECM cost estimates have provided a reasonable basis for grant awards. There was a high variation in ECM unit costs. The data did not support speculation that there is a tendency to manipulate cost estimates to fit ECMs within the simple payback eligibility criteria of 2 to 10 years

  3. Energy conservation programs of Pemex exploration and production, south region; Programas de ahorro de energia en Pemex exploracion y produccion, region sur

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Milla, Guillermo; Garcia Juarez, Francisco; Alarcon Aleman, Jose Mauricio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1999-12-31

    The technological developments of energy economizing equipment constitute a powerful tool for the conservation and saving of the electric energy in new or existing installations. Petroleos Mexicanos (PEMEX) Exploration and Production initiated in 1997 a program for energy economizing in the South region, for which the Instituto de Investigaciones Electricas, through its Unit for the Use of Energy, collaborated performing energy assessments in 115 buildings of the above mentioned region. This paper describes the employed methodology to carry on the energy assessment, which consisted in an analysis of each building and different options for energy economizing were presented, which was accompanied with cost-benefit studies. The results obtained show that the air conditioning equipment and lighting represent the most important loads permanently connected, therefore the study was concentrated in these two loads [Espanol] Los desarrollos tecnologicos de equipos ahorradores de energia constituyen una poderosa herramienta para la conservacion y el ahorro de energia electrica en instalaciones nuevas o existentes. Petroleos Mexicanos (PEMEX) Exploracion y Produccion inicio en 1997 un programa para el ahorro de energia en la region sur, para lo cual el Instituto de Investigaciones Electricas, a traves de la Unidad de Uso de Energia, colaboro realizando diagnosticos energeticos en 115 edificios de dicha region. En este documento se describe la metodologia utilizada para realizar el diagnostico energetico, el cual consistio en un analisis de cada edificio y se presentaron diversas opciones para ahorrar energia, lo cual se acompano de estudios de costo-beneficio. Los resultados obtenidos muestran que los equipos de aire acondicionado e iluminacion representan la parte mas importante de las cargas conectadas permanentemente, por lo que el estudio se concentro en estas dos cargas

  4. Energy conservation programs of Pemex exploration and production, south region; Programas de ahorro de energia en Pemex exploracion y produccion, region sur

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Milla, Guillermo; Garcia Juarez, Francisco; Alarcon Aleman, Jose Mauricio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1998-12-31

    The technological developments of energy economizing equipment constitute a powerful tool for the conservation and saving of the electric energy in new or existing installations. Petroleos Mexicanos (PEMEX) Exploration and Production initiated in 1997 a program for energy economizing in the South region, for which the Instituto de Investigaciones Electricas, through its Unit for the Use of Energy, collaborated performing energy assessments in 115 buildings of the above mentioned region. This paper describes the employed methodology to carry on the energy assessment, which consisted in an analysis of each building and different options for energy economizing were presented, which was accompanied with cost-benefit studies. The results obtained show that the air conditioning equipment and lighting represent the most important loads permanently connected, therefore the study was concentrated in these two loads [Espanol] Los desarrollos tecnologicos de equipos ahorradores de energia constituyen una poderosa herramienta para la conservacion y el ahorro de energia electrica en instalaciones nuevas o existentes. Petroleos Mexicanos (PEMEX) Exploracion y Produccion inicio en 1997 un programa para el ahorro de energia en la region sur, para lo cual el Instituto de Investigaciones Electricas, a traves de la Unidad de Uso de Energia, colaboro realizando diagnosticos energeticos en 115 edificios de dicha region. En este documento se describe la metodologia utilizada para realizar el diagnostico energetico, el cual consistio en un analisis de cada edificio y se presentaron diversas opciones para ahorrar energia, lo cual se acompano de estudios de costo-beneficio. Los resultados obtenidos muestran que los equipos de aire acondicionado e iluminacion representan la parte mas importante de las cargas conectadas permanentemente, por lo que el estudio se concentro en estas dos cargas

  5. Strategies for energy conservation in HWP (M)

    International Nuclear Information System (INIS)

    Rama Rao, V.V.S.; Gupta, R.V.; Rao, A.L.N.

    2002-01-01

    Heavy water plant at Manuguru is designed to produce 185 MTY of NG heavy water based on bi-thermal H 2 S-H 2 O exchange process. Being a plant based on isotopic separation process, the requirement of feed water, utilities and the inventory of H 2 S is very huge. Sustained efforts have brought down the specific energy consumption from 53.3 GJ/Kg of nuclear grade product in the financial year 1997-98 to a value of 37.6 GJ/Kg of product in the financial year 2001-02, which amounts to a reduction of 29.5%. Several modifications have been done in the following areas, which contributed towards significant energy conservation eg. reduction in consumption of steam, electric power, chemicals and man hours and in the down time of the plant/equipment's, reduction in the loss of H 2 S, D 2 O and various utilities, enhanced recycling of liquid effluents, increase in production, on stream hours, purity of the inputs, avoiding trips and unusual occurrences, trimming the built in cushions, changes in the design/elimination of certain design provisions resulting in savings, increase in operational flexibility to facilitate smooth operation, improved house keeping and quality management, improved O and M practices, upgradation of required skills/qualifications of the personnel and increasing their motivation. This paper highlights the improvements done/being taken up since the year 2000. (author)

  6. Energy conservation and the principle of equivalence

    International Nuclear Information System (INIS)

    Haugan, M.P.

    1979-01-01

    If the equivalence principle is violated, then observers performing local experiments can detect effects due to their position in an external gravitational environment (preferred-location effects) or can detect effects due to their velocity through some preferred frame (preferred frame effects). We show that the principle of energy conservation implies a quantitative connection between such effects and structure-dependence of the gravitational acceleration of test bodies (violation of the Weak Equivalence Principle). We analyze this connection within a general theoretical framework that encompasses both non-gravitational local experiments and test bodies as well as gravitational experiments and test bodies, and we use it to discuss specific experimental tests of the equivalence principle, including non-gravitational tests such as gravitational redshift experiments, Eoetvoes experiments, the Hughes-Drever experiment, and the Turner-Hill experiment, and gravitational tests such as the lunar-laser-ranging ''Eoetvoes'' experiment, and measurements of anisotropies and variations in the gravitational constant. This framework is illustrated by analyses within two theoretical formalisms for studying gravitational theories: the PPN formalism, which deals with the motion of gravitating bodies within metric theories of gravity, and the THepsilonμ formalism that deals with the motion of charged particles within all metric theories and a broad class of non-metric theories of gravity

  7. Grant request: to implement energy conservation measures as part of the state original and supplemental energy conservation plans

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-16

    The program measures described in this document comprise a grant request to DOE under the Energy Policy and Conservation Act of 1975 and the Energy Conservation and Production Act of 1976. The amount requested, $5,555,000, will allow the extension, acceleration, and implementation of energy conservation activities already in progress in California. Accomplishments to date have included the adoption of residential standards, and the implementation of an energy survey program for public buildings. Efficiency standards have been established for refrigerators and room and central air conditioners, appliances which utilize a significant amount of residential energy. Before the end of 1977, efficiency standards will be established for clothes dryers, washers, and water heaters. Program elements are: technical/financial assistance; public awareness; standards setting; solar element; research/analysis/evaluation; and coordination and management.

  8. Promoting energy conservation in China's metallurgy industry

    International Nuclear Information System (INIS)

    Lin, Boqiang; Du, Zhili

    2017-01-01

    China is undergoing rapid industrialization and urbanization, with consequent dramatic increase in energy demand. Given energy scarcity, environmental pollution, energy security and energy cost constraints, energy conservation will be the major strategy in China's transition to a low-carbon economy. Since the metallurgy industry is a main sector of energy consumption, the efficiency of energy conservation in this industry will affect the future prospects of energy savings. This paper analyzes the energy conservation potential of China's metallurgy industry. First, seemingly unrelated regression method is applied to investigate the relationship between energy relative price, R&D input, enterprise ownership structure, enterprise scale and energy intensity of the metallurgy industry. Then, based on the SUR results, we use the scenario analysis method to predict energy consumption and savings potential in the industry in different scenarios. This paper provides references for China's government and metallurgy industry in formulating relevant energy conservation policies. - Highlights: • Seemingly unrelated regression method is applied to analyze the energy intensity of metallurgy industry. • We use the scenario analysis method to predict energy consuming and energy saving of Chinese metallurgy industry. • Provide references for China's government and metallurgy industry in formulating relevant energy conservation policies.

  9. Analysis of alternative strategies for energy conservation in new buildings

    Science.gov (United States)

    Fang, J. M.; Tawil, J.

    1980-12-01

    The policy instruments considered include: greater reliance on market forces; research and development; information, education and demonstration programs; tax incentives and sanctions; mortgage and finance programs; and regulations and standards. The analysis starts with an explanation of the barriers to energy conservation in the residential and commercial sectors. Individual policy instruments are described and evaluated with respect to energy conservation, economic efficiency, equity, political impacts, and implementation and other transitional impacts. Five possible strategies are identified: (1) increased reliance on the market place; (2) energy consumption tax and supply subsidies; (3) Building Energy Performance Standards (BEPS) with no sanctions and no incentives; (4) BEPS with sanctions and incentives (price control); and (5) BEPS with sanctions and incentives (no price controls). A comparative analysis is performed. Elements are proposed for inclusion in a comprehensive strategy for conservation in new buildings.

  10. International energy conservation: comparative law and policy

    Energy Technology Data Exchange (ETDEWEB)

    1979-02-01

    Ernest C. Baynard III, in the Foreword to the conference, told of the purpose of the conference - to compare and discuss the policies and laws that highly industrialized nations have used and considered to meet the challenge of energy conservation. The following countries participated in the conference: U.K.; Australia; Federal Republic of Germany; Japan; France; Canada; Sweden; Italy; the Netherlands; and the U.S. The IEA and the Commission of the European Communities also participated. The conference format consisted of ministerial addresses to the conference, interspersed with panel discussions focusing on energy conservation in transportation, industry, agriculture, and utilities; residential, commercial, and industrial buildings; and emergency situations. There was also a panel discussion on the role of government in energy conservation and energy information collection. The panels were composed of participating countries' representatives. (MCW)

  11. Environmental Development Plan for Transportation Energy Conservation. FY 79 update

    Energy Technology Data Exchange (ETDEWEB)

    Singh, M. K.; Bernard, III, M. J.

    1978-12-15

    This is the first annual update of the Environment Development Plan (EDP) for the DOE Division of Transportation Energy Conservation program. It identifies the ecosystem, resource, physical environment, health, safety, and socioeconomic concerns associated with the division's transportation programs. These programs include the research, development, demonstration and assessment (RDD and A) of seventeen transportation technologies and several strategy and policy development and implementation projects. The transportation technologies projects deal with highway transport including electric vehicles, marine transport and pipeline transport. This EDP presents a research and assessment plan for resolving any potentially adverse environmental concerns stemming from these programs.

  12. Italian energy conservation laws: Implementation problems

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Italian energy conservation Law No. 9 was designed to reduce Italy's worrisome 82% dependency on foreign energy supplies by encouraging the development and use of renewable energy sources, fuel diversification and auto-production/cogeneration by private industry. Law No. 10 was intended to promote energy conservation initiatives especially with regard to the efficient use of energy for space heating in public buildings. Both of these legal incentives have encountered great difficulties in implementation due to the inability of the Government to provide the necessary timely and sufficient start-up funds, as well as, due to the excessive bureaucratism that was built into the administrative procedures

  13. Indian energy conservation- status and strategies

    International Nuclear Information System (INIS)

    Dharmalingam, P.

    1996-01-01

    High rates of inflation combined with social justice against a backdrop of ever increasing population- this is a challenge which the Government of India is facing today. It is evident that the annual growth rate of 5.6% as envisaged for the VIIIth five year plan can never be met unless conscious efforts are made to augment energy supplies by energy demand management through energy conservation. In this context, a review of the energy consuming sectors in terms of their consumption trends, energy efficiencies or intensities, energy conservation opportunities, technologies used and energy investment programmes would prove useful and informative. (author). 10 tabs

  14. Market report: energy conservation with EDP assistance. Marktspiegel: Energieeinsparung mit EDV-Unterstuetzung

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    Also in the area of rational use of energy and use of renewable energy sources modern computer systems gain more and more importance. More and more energy conservation specialists of consulting services, public administration and utility companies use for the preparation, realization and control of energy-saving measures electronic data processing. The aim is to be able to evaluate the partly very complex dependencies in energy consumption - e.g. between building heating, process control and illumination - in an acceptable period of time. A number of software houses has specialized in the development of programs for different partly very specific fields of application in the area of energy. (orig.)

  15. Energy conservation efforts in Indian mining industry - an overview

    International Nuclear Information System (INIS)

    Pradhan, G.K.; Chattoraj, P.

    2010-01-01

    Conservation of energy is a national agenda as had been set by our Prime Minister at various fora, in the case of coal mining also there is ample scope to reduce specific energy conservation. The issue can be resolved through 'energy audit' so as to identify the areas of improvement, technology to introduce and innovative system to adopt. In a nutshell it can be concluded that, through energy audit, we can immediately save 10-15 % of energy without any major investment

  16. Building Standards and Codes for Energy Conservation

    Science.gov (United States)

    Gross, James G.; Pierlert, James H.

    1977-01-01

    Current activity intended to lead to energy conservation measures in building codes and standards is reviewed by members of the Office of Building Standards and Codes Services of the National Bureau of Standards. For journal availability see HE 508 931. (LBH)

  17. Energy conservation: its planning and management

    International Nuclear Information System (INIS)

    Nanda, K.S.; Patra, K.C.

    1995-01-01

    Energy conservation, its planning and management and the development of renewable energy systems of proven design are very worthy challenges for all. Energy education at various levels is most important particularly in the development of renewable energy technology. 2 refs., 3 tabs

  18. On energy conservation in extended magnetohydrodynamics

    International Nuclear Information System (INIS)

    Kimura, Keiji; Morrison, P. J.

    2014-01-01

    A systematic study of energy conservation for extended magnetohydrodynamic models that include Hall terms and electron inertia is performed. It is observed that commonly used models do not conserve energy in the ideal limit, i.e., when viscosity and resistivity are neglected. In particular, a term in the momentum equation that is often neglected is seen to be needed for conservation of energy

  19. Nationwide survey of energy conservation in public school districts: Institutional, organizational, and technical characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Collins, N.E.; Ettinger, G.A.; Gaines, L.L.; Kier, P.H.; Miller, K.L. (Argonne National Lab., IL (United States)); Kammerud, R.C. (Lawrence Berkeley Lab., CA (United States))

    1987-09-01

    This report summarizes the responses to a mail survey sent to superintendents and other administrators of public school districts. The survey was part of an evaluation project for the USDOE Institutional Conservation Program (ICP). The goal of the project is to identify the most successful energy conservation measures (equipment and activities) available to the institutional buildings sector. To accomplish this goal, four specific research objectives were defined: To determine the impact of the ICP grants program on fostering energy efficiency and saving energy; to determine key characteristics of institutional conservation efforts outside the federal program; To determine the technical, organizational, and Institutional conditions that create the opportunity for energy conservation measures (ECMS) to be most effective; and to identify key technology transfer opportunities. This report focuses on those characteristics of school districts (and the schools within those districts) that might influence the identification, implementation, operation, and impacts of institutional energy conservation efforts. Information about institutional characteristics was gathered through a mail survey of public school districts and private schools. The first mailing resulted in responses from 90 of the 823 public school districts selected through a combination cluster-and-stratification sampling technique and 64 of the 1,700 private schools selected as a stratified random sample. Remaining project resources were used to collect data to achieve a statistically sound sample of a total of 250 public school districts by telephone interviews. In doing so, some questions had to be dropped. Responses from both the mall surveys and the telephone interviews of public school districts were combined into one data set. This report describes results for all 250 districts.

  20. Risk calculations for energy conservation technologies: the likelihood of realizing design-phase expectations in new construction

    Energy Technology Data Exchange (ETDEWEB)

    Greden, Lara; Vaidya, Prasad; Baker, Chris; Eijadi, David; McDougall, Tom [The Weidt Group (United States)

    2007-07-01

    The risk that a technology will not be implemented or operated as designed is a significant barrier that impedes owners from adopting new energy-conserving building technologies. This results in a feedback loop that encourages decision makers to minimize risk by sticking with the status quo, regardless of the environmental impact. Different technology categories have different levels and types of risks associated with them.This study assigns levels of risk to technologies by tracing a set of envelope systems, lighting designs, lighting controls, HVAC systems, and HVAC controls in a data set of 38 buildings from the design phase through the initial implementation phase. The likelihood that a technology gets implemented and works as expected is assessed, and risk factors for the various technologies are calculated. Explanations for the levels of risk are supported by interviews with third-party reviewers who serve to assist design teams and owners through the construction phase. Results show that daylighting technologies, including dimming daylighting controls, have the highest risk of not being implemented - when otherwise chosen at the selection phase - while roof insulation and lighting designs are most likely to be fully and correctly implemented. Analysis comparing the risk to the energy conservation opportunity indicates the need for prioritization and support during the design and construction phases to realize expected levels of energy conservation. Overall, the interviewees said the most common reasons for lower than expected energy savings are that energy conservation measures were cut-out during value engineering or cut-out due to later decisions that a technology was functionally risky. This research supports large scale investments in energy conservation technologies for buildings through rebate programs, code improvements, and design guides created by large owners. It identifies technologies that need a higher degree of building management effort and

  1. Stimulating energy conservation: the use of the opinion-leadership process

    Energy Technology Data Exchange (ETDEWEB)

    Yavas, U [Univ. of Petroleum and Minerals, Dhahran, Saudi Arabia; Riecken, G

    1981-09-01

    While the US federal government, public utilities and oil companies, among others, have instigated programs to educate the general public on energy conservation and to stimulate an energy-conservation ethic, results of a number of surveys indicate that such efforts in promoting energy conservation have had only limited success. This may be particularly attributable to the low credibility ascribed by the public to energy-information-disseminating sources. This article investigates the feasibility of utilizing opinion leadership, an untried approach, to overcome the credibility problem in disseminating energy information to the general public. 23 references, 4 tables.

  2. Focus on energy conservation: a project list

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-01

    The Urban Land Institute (ULI) has prepared the following list of outstanding energy conserving projects for the US Department of Energy. As requested by the Department, the list includes descriptions of land developments and individual buildings suggested by members of ULI and by other sources. The projects have been selected to exemplify the major energy saving techniques in use today, with emphasis on those strategies most significant for people engaged in the business of land development. To make the list a useful reference for developers and public officials, ULI has attempted to cover energy conservation in the broadest sense from overall site planning to the functioning of individual building components. Focusing too closely on the myriad types of hardware available has been avoided and examples of the basic considerations important to energy-conscious planning and design are provided. Details on some heating, ventilation and air conditioning systems are provided in order to acquaint readers with major innovations in the field.

  3. Energy conservations from an environmental viewpoint

    Energy Technology Data Exchange (ETDEWEB)

    Hijikata, Kunio [Tokyo Inst. of Technology, Ohokayama, Meguroku (Japan)

    1993-12-31

    It is not incorrect to state that all major environmental problems, such as the greenhouse effect, destruction of the ozone layer from CFC`s, acid rain due to air pollution by NOx and SOx, etc., are caused by excessive industrial and residential energy consumption. Considering the finite world energy resources and limited global space, the day might be already upon us in which the total amount of energy consumption in the world should be reduced. To maintain a high living standard without increasing energy consumption, waste energy recovery and energy conservation are vitally important. In order to effective use of energy resources, we should really know the meaning of the energy consumption and the characteristics of energy resources. In this paper, the technological aspects of energy conservation are stated from the standpoint of available energy.

  4. French industry and the energy conservation challenge

    Energy Technology Data Exchange (ETDEWEB)

    Serpette, M.

    1979-07-01

    The general position of France and its energy conservation objectives; the action taken by the government to stimulate this policy; and government cooperation with industrial circles and the action of industry itself are discussed. It is observed that the potential for future energy savings are smaller in France than in other countries because consumptions are already down to minimal levels. Consumption patterns in France are illustrated. (MCW)

  5. Principles of the Energy Conservation Bill

    International Nuclear Information System (INIS)

    Zeman, J.

    1995-01-01

    The paper describes 21 principles of the draft Energy Conservation Bill. The principles lay down fundamental responsibilities of the government, the municipalities, business entities, citizens and power plants in the field of economical energy management. Included are principles to minimize energy consumption and to stimulate a reasonable energy management, the role of the energy distribution network, responsibilities of the central load dispatching center, and power plant output regulation schemes. (J.B.)

  6. CO2 reduction through energy conservation

    International Nuclear Information System (INIS)

    1991-05-01

    A study was carried out of the potential to economically reduce carbon dioxide emissions through energy conservation in the petroleum and natural gas industry. The study examined current and projected emissions levels, cogeneration at gas plants, flaring, economics, regulation, reporting requirements, implementation, and research and development. Economically attractive energy conservation measures can reduce oil and gas industry, exclusive of Athabasca oil sands operations, CO 2 emissions by 6-7%. The energy conservation options identified range from field energy awareness committees through to equipment retrofits and replacement. At ca 3 million tonnes/y, these reductions will not offset the increases in oil and gas related CO 2 emissions anticipated by producers and Alberta government agencies. There will be increasing emphasis on in-situ bitumen production, more energy intensive light crude oil production and increasing natural gas sales, increasing energy inputs in excess of reductions. Cogeneration of electricity for utility company distribution and for internally required steam at gas plants and in-situ production sites is not economic due to low electricity prices. 8 tabs

  7. Financial methods applicable to energy-conserving retrofits for single-family residences

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-06-01

    The National Savings and Loan League (NSLL) has been researching techniques that may be used to finance energy-conservation measures in the residential sector. Twelve techniques developed and tested by NSLL are: future-advances clause under open-end mortgages; borrowing against existing savings accounts; home-improvement loans; variable-rate mortgages; second trusts or second mortgages; variable-payment mortgages; balloon-payment mortgages; deferred monthly payments for periods of excessive energy use; renegotiation of terms at set intervals; lower interest rates offered on mortgages in return for lender sharing in equity appreciation of the property; graduated payments; and deferred-interest loans. The testing took place in Pittsburgh, PA. The program consisted of 8 specific tasks, including several directed at different financial innovations for the financing of retrofits. Details are presented on findings; legal research; relationship of utilities to installation of retrofits; financing techniques applicable to retrofits; and national energy program for single-family residences. Some extensive attachments include information on: legal aspects, energy loan advertisements, and potential savings to be realized from various residential retrofit energy-conservation measures.

  8. ATR Technical Specification Upgrade Program

    International Nuclear Information System (INIS)

    McCracken, R.T.; Durney, J.L.; Freund, G.A.

    1990-01-01

    The Advanced Test Reactor (ATR) is a 250 MW, uranium-aluminum fueled test reactor which began full power operation in 1969. The initial operation was controlled by an Operating Limits document based on the original Safety Analysis Report. Additional safety bases were later developed to support Technical Specifications which were approved and implemented in 1977. The Technical Specifications which were initially developed with content and format specified in ANSI/ANS--15.1, ''The Development of Technical Specifications for Research Reactors.'' The safety basis documentation and the Technical Specifications have been updated as required to maintain them current with the ATR facility configuration. All revisions have been made with a content, format and style consistent with the original. A major, two-phase program to upgrade the content, format and style is in progress. This paper describes the first phase of this program

  9. Energy Conservation In Compressed Air Systems

    International Nuclear Information System (INIS)

    Yusuf, I.Y.; Dewu, B.B.M.

    2004-01-01

    Compressed air is an essential utility that accounts for a substantial part of the electricity consumption (bill) in most industrial plants. Although the general saying Air is free of charge is not true for compressed air, the utility's cost is not accorded the rightful importance due to its by most industries. The paper will show that the cost of 1 unit of energy in the form of compressed air is at least 5 times the cost electricity (energy input) required to produce it. The paper will also provide energy conservation tips in compressed air systems

  10. CO2 emissions reduction using energy conservation measures: EPA Region IV's experience

    International Nuclear Information System (INIS)

    Berish, C.; Day, R.; Sibold, K.; Tiller, J.

    1994-01-01

    EPA Region 4 concluded in a recent comparative environmental risk evaluation that global climate change could substantially impact the Southeast. To address this risk, Region 4 developed an action plan to promote cost-effective pollution prevention and reduce greenhouse gas emissions, The regional plan contains programs that aye specific to Region 4 as well as geographic components of the national Climate Change Action Plan. Sources of carbon dioxide emissions were targeted for pollution prevention based on an energy model that allows the user to create energy efficiency scenarios in four sectors: residential, commercial, industrial, and transportation. Activities were selected using the modeled information on sector reduction potentials and resource and cost-effectiveness criteria. Given the high level of uncertainty associated with climate change projections, the programs developed are all cost effective, prevent pollution and/or result in sound adaptation policies. Currently, policy makers at national, regional, and local levels are deciding on what types of energy efficiency programs to implement. The region's action plan is composed of several programs and approaches. The authors have developed implemented, and/or participated in the following: energy scenario model. EARTHWALK (residential energy conservation); energy conservation in affordable homes (new residences); Cool Communities Program (strategic tree planting and light colored surfaces); EPA's Green Lights Program; WAVE (water conservation), the Plant Protection Center; QUEST TO SAVE THE EARTH (outreach tools); energy and water use planning for the 1996 Olympic Games, and planning for sea-level rise. Reviewing the practices of the above programs will be the focus of this paper

  11. Energy conservation in ethanol production from renewable resources and non-petroleum energy sources

    Energy Technology Data Exchange (ETDEWEB)

    1981-03-01

    The dry milling process for the conversion of grain to fuel ethanol is reviewed for the application of energy conservation technology, which will reduce the energy consumption to 70,000 Btu per gallon, a reduction of 42% from a distilled spirits process. Specific energy conservation technology applications are outlined and guidelines for the owner/engineer for fuel ethanol plants to consider in the selection on the basis of energy conservation economics of processing steps and equipment are provided. The process was divided into 5 sections and the energy consumed in each step was determined based on 3 sets of conditions; a conventional distilled spirits process; a modern process incorporating commercially proven energy conservation; and a second generation process incorporating advanced conservation technologies which have not yet been proven. Steps discussed are mash preparation and cooking, fermentation, distillation, and distillers dried grains processing. The economics of cogeneration of electricity on fuel ethanol plants is also studied. (MCW)

  12. Pollution prevention and energy conservation: Understanding the interactions

    International Nuclear Information System (INIS)

    Purcell, A.H.

    1992-01-01

    The traditional view holds that pollution prevention is good for energy conservation and vice versa. Analysis of pollution prevention and energy conservation activities indicates, however, that interactions and synergies between environmental and energy factors can mean that pollution prevention can be energy intensive and, conversely, that energy conservation can lead to increased pollution. Full cost accounting, taking into account all media, must be performed before precise pollution prevention-energy conservation interrelationships can be characterized and quantified. Use of a pollution prevention-energy conservation matrix can further this understanding

  13. Logic programming and metadata specifications

    Science.gov (United States)

    Lopez, Antonio M., Jr.; Saacks, Marguerite E.

    1992-01-01

    Artificial intelligence (AI) ideas and techniques are critical to the development of intelligent information systems that will be used to collect, manipulate, and retrieve the vast amounts of space data produced by 'Missions to Planet Earth.' Natural language processing, inference, and expert systems are at the core of this space application of AI. This paper presents logic programming as an AI tool that can support inference (the ability to draw conclusions from a set of complicated and interrelated facts). It reports on the use of logic programming in the study of metadata specifications for a small problem domain of airborne sensors, and the dataset characteristics and pointers that are needed for data access.

  14. Decision support for energy conservation promotion: an analytic hierarchy process approach

    International Nuclear Information System (INIS)

    Kablan, M.M.

    2004-01-01

    An effective energy conservation program in any country should encourage the different enterprises, utilities and individuals to employ energy efficient processes, technologies, equipment, and materials. Governments use different mechanisms or policy instruments such as pricing policy (PP), regulation and legislation (RL), training and education, fiscal and financial incentives (FFI), and R and D to promote energy conservation. Effective implementation of energy conservation policies requires prioritization of the different available policy instruments. This paper presents an analytic hierarchy process (AHP) based modeling framework for the prioritization of energy conservation policy instruments. The use of AHP to support management in the prioritization process of policy instruments for promoting energy conservation is illustrated in this research using the case study of Jordan. The research provided a comprehensive framework for performing the prioritization in a scientific and systematic manner. The four most promising policy instruments for promoting energy conservation in Jordan are RL (37.4%), followed by FFI (22.2%), PP (18.0%), and Training, education and qualification (14.5%). One of the major advantages of the use of the AHP approach is that it breaks a large problem into smaller problems which enables the decision-maker (DM) to have a better concentration and to make more sound decisions. In addition, AHP employs a consistency test that can screen out inconsistent judgements. The presented methodology of the research might be beneficial to DMs in other countries

  15. Encouraging energy conservation in multifamily housing: RUBS and other methods of allocating energy costs to residents

    Energy Technology Data Exchange (ETDEWEB)

    McClelland, L

    1980-10-01

    Methods of encouraging energy conservation in multifamily housing by allocating energy costs to residents are discussed; specifically, methods appropriate for use in master metered buildings without equipment to monitor energy consumption in individual apartments are examined. Several devices available for monitoring individual energy consumption are also discussed plus methods of comparing the energy savings and cost effectiveness of monitoring devices with those of other means of promoting conservation. Specific information in Volume I includes a comparison study on energy use in master and individually metered buildings; types of appropriate conservation programs for master metered buildings; a description of the Resident Utility Billing System (RUBS); energy savings associated with RUBS; Resident reactions to RUBS; cost effectiveness of RUBS for property owners; potential abuses, factors limiting widespread use, and legal status of RUBS. Part I of Volume II contains a cost allocation decision guide and Part II in Volume II presents the RUBS Operations Manual. Pertinent appendices to some chapters are attached. (MCW)

  16. Smarter by Degrees. Towards new instruments for energy conservation policy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-11-15

    Achieving the government's ambition of 1.5 to 2% energy savings annually will require every effort to be made. Households, small and medium-sized businesses, government and semi-governmental institutions (energy-extensive energy consumers) will also be able to make an important contribution. This group represents considerable savings potential of about 300 PJ. There are three types of instruments that may be used for this group to achieve the desired goal (1) obligation/prohibition, i.e., regulations and standards to demand energy efficient investments (construction, facilities, equipment, etc.); (2) price incentives (subsidies/taxes) to promote energy-efficient solutions; (3)enticement/influence, appealing to reason (information, arguments) or emotion to promote the right choice/behaviour. Analysis of past experiences presents the conclusion that so-called soft instruments are sometimes briefly effective but often have little or no effect. The Council believes, however, that such a conclusion is premature, as certain conditions were not met in the past that were very important to effectiveness. First, soft instruments must be implemented consistently and over the long term (about 4 years, at least). Appealing to the very diverse consumers also requires a custom approach. The tone of the conservation policy must also be more in tune with changing trends in society. Citizens must especially be appealed to in terms of cost advantages, responsible energy consumption (good housekeeping) and comfort, whereas the emphasis in the past lay on decency, solidarity and thrift. Specific action perspectives must also be offered. Partly on the basis of experience, such as in waste collection, the Council concludes that a well-assembled mix of soft and hard instruments will be necessary to encourage energy conservation. It is clear that soft instruments alone can be expected to produce unsatisfactory results. Therefore, a combination of soft and hard instruments is advocated

  17. Energy conservation indicators. 1982 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Belzer, D.B.

    1982-09-01

    A series of Energy Conservation Indicators were developed for the Department of Energy to assist in the evaluation of current and proposed conservation strategies. As descriptive statistics that signify current conditions and trends related to efficiency of energy use, indicators provide a way of measuring, monitoring, or inferring actual responses by consumers in markets for energy services. Related sets of indicators are presented in some 40 one-page indicator summaries. Indicators are shown graphically, followed by several paragraphs that explain their derivation and highlight key findings. Indicators are classified according to broad end-use sectors: Aggregate (economy), Residential, Commercial, Industrial, Transportation and Electric Utilities. In most cases annual time series information is presented covering the period 1960 through 1981.

  18. Green Tribology Biomimetics, Energy Conservation and Sustainability

    CERN Document Server

    Bhushan, Bharat

    2012-01-01

    Tribology is the study of friction, wear and lubrication. Recently, the concept of “green tribology” as “the science and technology of the tribological aspects of ecological balance and of environmental and biological impacts” was introduced. The field of green tribology includes tribological technology that mimics living nature (biomimetic surfaces) and thus is expected to be environmentally friendly, the control of friction and wear that is of importance for energy conservation and conversion, environmental aspects of lubrication and surface modification techniques, and tribological aspects of green applications such as wind-power turbines or solar panels. This book is the first comprehensive volume on green tribology. The chapters are prepared by leading experts in their fields and cover such topics as biomimetics, environmentally friendly lubrication, tribology of wind turbines and renewable sources of energy, and ecological impact of new technologies of surface treatment.

  19. Combining interviewing and modeling for end-user energy conservation

    International Nuclear Information System (INIS)

    Goldblatt, David L.; Hartmann, Christoph; Duerrenberger, Gregor

    2005-01-01

    Studying energy consumption through the lens of households is an increasingly popular research avenue. This paper focuses on residential end-user energy conservation. It describes an approach that combines energy modeling and in-depth interviews for communicating about energy use and revealing consumer preferences for change at different levels and intervention points. Expert knowledge was embodied in a computer model for householders that calculates an individual's current energy consumption and helps assess personal savings potentials, while also bringing in socio-technical and economic elements beyond the user's direct control. The paper gives a detailed account of this computer information tool developed for interviewing purposes. It then describes the interview guidelines, data analysis, and main results. In general, interview subjects overestimated the environmental friendliness of their lifestyles. After experience with the program, they tended to rate external (technological, societal) factors as somewhat stronger determinants of their consumption levels than personal (behavioral and household investment) factors, with the notable exception of mobility. Concerning long-term energy perspectives, the majority of subjects felt that society has the ability to make a collective choice towards significantly lower energy consumption levels. Interviewees confirmed that the software and interactive sessions helped them think more holistically about the personal, social, and technological dimensions of energy conservation. Lessons can be applied to the development of future energy communication tools

  20. Real world financing opportunities for energy conservation projects

    Energy Technology Data Exchange (ETDEWEB)

    Tramonte, D.J.

    1988-01-01

    Do you have the resources, dollars, people expertise and general know-how to do all the energy conservation measures. If you have the funds, do it yourself. Historically you would save more if you hired a private concern because that is the only job the contractor does for you. You have other hats to wear and fires to put out. Using third-party financing can be a good decision based on your specific needs. Procrastination is not the answer - the cost of delay is extensive. Financing energy conservation measures is no different from financing your automobile or home. If the benefits outweigh the negatives, the answer is obvious. Remember, in any case of using private sector financing, your are joining a partnership arrangement. The only way to succeed is to be honest with each other on the front end. There need not be any surprises. Any reputable company will gladly have your attorney evaluate all agreements, amortization schedules, and attachments. Real world financing alternatives will continue to change as the market matures. It's not too good to be true. It is no more than a vehicle to make the efforts of capital improvements streamlined. The money or financing is the catalyst to the project and makes the other areas meld.

  1. Overview topic paper on mass media energy conservation communications

    Energy Technology Data Exchange (ETDEWEB)

    Vertinsky, P; Vertinsky, I

    1979-02-01

    The utilization of information diffusion strategies to increase energy conservation knowledge and practices among the general population in Canada is discussed in terms of 5 media functions: information dissemination, remedial behavior modification, lifestyle decisions, initiating conservation action, and crisis management. Each of these functions is critically addressed in terms of media mix, message content and form, timing and intensity, exposure, and specific target populations. The diffusion strategies are then organized into a matrix of policy options to enable the appropriate one to be selected. Four major categories of energy conservation information considered are the nature of the energy problem, methods of conservation, results of conservation, and the individual consumer decision-making process. Heavy television exposure suggests this medium has enormous potential for informing Canadians on conservation issues. Print seems to be the main source of detailed, specialized, and sophisticated kinds of information. However, despite wide media availability, large numbers of the population consistently escape contact with widely reported information. Behavioral modification to change undesirable energy habits is examined from the perspectives of initial change and cultural/social change required to sustain new lifestyles. The use of mass media during crisis situations may be of essential importance for implementation of future energy policies. Information dissemination and responses to the mass media do not appear to have the same patterns during crisis and non-crisis situations. 279 refs.

  2. Energy conservation in state-owned civil buildings 1978 - 1995; Wnoek-arbeidet i sivile statlige bygg 1978-1995

    Energy Technology Data Exchange (ETDEWEB)

    Rustad, Hilde

    1996-12-31

    This report sums up the work done on energy conservation in state-owned civil buildings in Norway in 1978 - 1995. Departmental funding was provided for such projects annually in 1978 - 1993, while in 1994 - 1995 energy conservation work consisted in completing running projects. The calculated energy saving amounts to 162 GWh per year. About 60% of the reduction in energy consumption is due to energy conservation measures that lower the energy consumption from oil-based heating. These measures represent an annual reduction of environmentally harmful emissions of 26240 ton carbon dioxide and 41 ton sulfur dioxide. In addition to specific energy conservation measures, much work went into arranging courses and on making consumers follow-up their energy consumption with respect to efficiency. The report is aimed at people and technical committees involved in energy conservation work. 16 figs., 2 tabs.

  3. Department of Defense Facilities Energy Conservation Policies and Spending

    National Research Council Canada - National Science Library

    Andrews, Anthony

    2008-01-01

    .... This report reviews energy conservation legislation and Executive Orders that apply to the Department of Defense, directives and instructions to the military departments and agencies on implementing...

  4. Policy study: energy conservation in transportation in Puerto Rico

    Energy Technology Data Exchange (ETDEWEB)

    Mayda, J

    1978-09-01

    The present study is an initial effort to apply social system analysis to transportation energy conservation, in order to prepare the ground for a team effort of transportation and energy specialists, regional planners, policy analysis and generalists, and government administrators - with additional imputs from commerce, industry and the community at large. The task of this study has been to inventory the principal factors and inputs in the field of transportation energy demand and possible conservation, estimate their magnitudes and relations, and arrange in a tentative but reasoned pattern - where there were before only so many scattered data, technical studies with a limited focus, sectoral programs and decisions, and vague impressions about the serviceability, the impacts and the social value of the product.

  5. Energy Conservation of the Designated Government Buildings in Thailand

    Directory of Open Access Journals (Sweden)

    Wangskarn Prapat

    2016-01-01

    Full Text Available The designated government buildings have implemented and administered energy program under the energy development and promotion Act 2007 for many years continuously until 2015. Appointment person responsible for energy, performing energy management and implementing the energy conservation work plan and measures are legal requirements for the designated buildings. Therefore, the ministry of Energy has launched the project to support the implementation of energy management. The aim of the project was to create the energy management system in the designated government buildings, and to reduce energy consumption. In this paper, the evaluation of the project has been presented from the achievements of 839 designated government buildings. The energy saving is more than 440 ktoe/year. This is about 3% of energy consumptions of buildings.

  6. Energy conservation through thermally insulated structures

    International Nuclear Information System (INIS)

    Abu-Dayyeh, Ayoub

    2006-01-01

    The propose of this paper is to explicate its title through investigating the different available thermal insulating materials and the various techniques of application, as practiced in Jordan, in particular, and as practiced in many parts of the world in general, which will satisfy Jordanian standards in terms of heat transmittance and thermal comfort. A brief comparison with international standards will shed some light on the stringent measures enforced in the developed world and on our striving aspirations to keep pace. The paper consists of four main parts, pseudoally divided. The first part will deal with the mechanism of heat loss and heat gain in structures during summer and winter. It will also explain the Time-lag phenomenon which is vital for providing thermal comfort inside the dwellings. The second part will evaluate the damages induced by the temperature gradients on the different elements of the structure, particularly next to exterior opening. The paper will also demonstrate the damages induced by water condensation and fungus growth on the internal surfaces of the structure and within its skeleton. A correlation between condensation and thermal insulation will be established. The third part of the paper will evaluate the different available thermal insulating materials and the application techniques which will satisfy the needs for thermal insulating and thermal comfort at the least cost possible. The criteria of an economical design shall be established. As a conclusion, the paper infers answers to the following different criteria discussed throughout the different parts of the paper. The main theme of questions can be summarized as follows: 1)How energy conservation is possible due to thermal insulation? 2)The feasibility of investing in thermal insulation? 3)Is thermal comfort and a healthy atmosphere possible inside the dwellings during all season! What are the conditions necessary to sustain them? 4)What environmental impacts can exist due to

  7. 24 CFR 965.306 - Energy conservation equipment and practices.

    Science.gov (United States)

    2010-04-01

    ... Measures § 965.306 Energy conservation equipment and practices. In purchasing original or, when needed, replacement equipment, PHAs shall acquire only equipment that meets or exceeds the minimum efficiency... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Energy conservation equipment and...

  8. Energy conservation attitudes, knowledge, and behaviors in science laboratories

    International Nuclear Information System (INIS)

    Kaplowitz, Michael D.; Thorp, Laurie; Coleman, Kayla; Kwame Yeboah, Felix

    2012-01-01

    Energy use per square foot from science research labs is disproportionately higher than that of other rooms in buildings on campuses across the nation. This is partly due to labs’ use of energy intensive equipment. However, laboratory management and personnel behavior may be significant contributing factors to energy consumption. Despite an apparent increasing need for energy conservation in science labs, a systematic investigation of avenues promoting energy conservation behavior in such labs appears absent in scholarly literature. This paper reports the findings of a recent study into the energy conservation knowledge, attitude and behavior of principle investigators, laboratory managers, and student lab workers at a tier 1 research university. The study investigates potential barriers as well as promising avenues to reducing energy consumption in science laboratories. The findings revealed: (1) an apparent lack of information about options for energy conservation in science labs, (2) existing operational barriers, (3) economic issues as barriers/motivators of energy conservation and (4) a widespread notion that cutting edge science may be compromised by energy conservation initiatives. - Highlights: ► Effective energy conservation and efficiency depend on social systems and human behaviors. ► Science laboratories use more energy per square foot than any other academic and research spaces. ► Time, money, quality control, and convenience overshadow personnel’s desire to save energy. ► Ignorance of conservation practices is a barrier to energy conservation in labs.

  9. Environmental protection through energy conservation: A free lunch at last?

    International Nuclear Information System (INIS)

    Ruff, L.E.

    1990-01-01

    A cautious analysis of demand-side management programs is presented. Utility demand-side management (DSM) programs deserve to be given full and careful consideration as a potential way to give consumers better end-use energy services for their money, utilities an edge in an increasingly competitive market, and society a way to reduce the environmental costs of energy production. But in each of these areas, DSM programs offer no free lunches and have no inherent advantages over supply-side programs. If energy conservation makes sense on economic and business grounds, it can meet the standard economic and business tests applied to most of the rest of the economy; it neither requires nor deserves to be exempt from market concepts and disciplines. If utility DSM programs make sense on environmental grounds, they should be able to demonstrate their cost-effectiveness relative to other, primarily supply-side measures society is willing to undertake in order to control environmental effects. Subsidizing DSM measures in the hope that something good will happen far upstream can waste much money and cause disappointment and frustration

  10. Energy conservation: policy issues and end-use scenarios of savings potential. Part V. Energy efficient buildings: the causes of litigation against energy conservation building codes

    Energy Technology Data Exchange (ETDEWEB)

    Benenson, P.; Codina, R.; Cornwall, B.

    1978-09-01

    The guidelines laid out for the five subjects investigated in this series are to take a holistic view of energy conservation policies by describing the overall system in which they are implemented; provide analytical tools and sufficiently disagregated data bases that can be adapted to answer a variety of questions by the users; identify and discuss some of the important issues behind successful energy conservation policy; and develop an energy conservation policy in depth. Three specific cases reviewed are: the California nonresidential code (1976); the California residential code (1978); and the Farmers Home Administration code (1978). Although these three suits were brought by the building industry, this report also discusses considerations relevant to architects, bankers, and building inspectors. These cases are discussed from three perspectives: (1) objections to the codes explicitly stated in court, (2) industry conditions and practices behind objections stated in court, and (3) general beliefs not stated in court. This discussion focuses on suits intended to limit those building codes which the building industry sees as too strong. However, some energy conservation industries may sue to strengthen codes which they consider too weak. An example of such a case is Polarized Corporation's current suit against the Lighting section of ASHRAE 90-75 (Los Angeles Federal District Court, see Murnane, 1978). (MCW)

  11. Managing post-therapy fatigue for cancer survivors using energy conservation training.

    Science.gov (United States)

    Yuen, Hon Keung; Mitcham, Maralynne; Morgan, Larissa

    2006-01-01

    This pilot study evaluated the effectiveness of energy conservation training to help post-therapy cancer survivors manage their fatigue. Twelve post-therapy cancer survivors were randomly assigned to an energy conservation training or usual care control (6 in each group). Participants in the intervention group received 1 to 2 hours of individual, face-to-face energy conservation training from an occupational therapist followed by once-a-week telephone monitoring sessions in the subsequent three weeks. Participants in the control group received standard care from their oncologist. Analysis of pre- and post-training data from the Piper Fatigue Scale (PFS) revealed significant reduction only in the sensory subscale of the PFS (Z = 2.21; p = 0.027) for the intervention group; but no significant reduction in the four subscale or total scores of the PFS for the control group. Findings demonstrate partial support for the effectiveness of energy conservation training in helping post-therapy cancer survivors manage their fatigue. Energy conservation training seems to be a viable strategy for managing cancer-related fatigue, though its efficacy is modest. Incorporating specific energy restoration strategies such as relaxation and meditation for future research may help advance the growing body of knowledge in symptom management for post-therapy cancer survivors.

  12. Designing effective incentives for energy conservation in the public sector

    Science.gov (United States)

    Drezner, Jeffrey Alan

    Understanding why government officials behave in certain ways under particular circumstances is an important theme in political science. This research explores the design of policies and incentives targeted at public sector officials, in particular the use of market based policy tools in a non-market environment, and the influence of that organizational environment on the effectiveness of the policy. The research examines the case of Department of Defense (DoD) facility energy management. DoD energy policy includes a provision for the retention of savings generated by conservation activities: two-thirds of the savings is retained at the installation generating the savings, half to used for further investment in energy conservation, and half to be used for general morale, welfare, and recreation activities. This policy creates a financial incentive for installation energy managers to establish higher quality and more active conservation programs. A formal written survey of installation energy managers within DoD was conducted, providing data to test hypotheses regarding policy effectiveness and factors affecting policy implementation. Additionally, two detailed implementation case studies were conducted in order to gain further insights. Results suggest that policy design needs to account for the environment within which the policy will be implemented, particularly organizational culture and standard operating procedures. The retention of savings policy failed to achieve its intended outcome---retention of savings for re-investment in energy conservation---because the role required of the financial management community was outside its normal mode of operation and interests and the budget process for allocating resources did not include a mechanism for retention of savings. The policy design did not adequately address these start-up barriers to implementation. This analysis has shown that in order for retention of savings, or similar policies based on market

  13. BPA's Eighth Annual Energy Conservation Management Conference : Proceedings.

    Energy Technology Data Exchange (ETDEWEB)

    Energy Conservation Management Conference (8th : 1981); United States. Bonneville Power Administration.

    1981-01-01

    The five-year energy conservation program at Bonneville Power Administration (BPA) is described at the conference. An overview of the program is presented. Topics covered in panel discussions include: how utilities can work effectively with weatherization contractors, homebuilders, energy auditors, and weatherization material suppliers; mechanisms for implementing conservation programs in the commercial sector; experiences gained in existing residential weatherization programs; and streamlining relationships between consumers, utilities, and BPA in providing services and getting feedback. The planning, programming, technical assistance, and engineering thrusts of BPA's conservation programs are discussed. Indoor air quality, renewable energy, and the regulator's role in relationships to energy conservation are discussed. Passive solar programs, DOE initiatives in solar and conservation for buildings, conservation potential in the commercial and industrial sectors, and current conservation research and development are also discussed. (MCW)

  14. 77 FR 49739 - Energy Conservation Standards for Residential Dehumidifiers: Public Meeting and Availability of...

    Science.gov (United States)

    2012-08-17

    ... shares, or other commercial matters regulated by U.S. antitrust laws. After the public meeting and the..., Public Law 94-163, (42 U.S.C. 6291-6309), as amended, established an energy conservation program for...-designated Part A for editorial reasons. The Energy Policy Act of 2005 (EPACT 2005), Public Law 109-58...

  15. Moisture and Home Energy Conservation: How to Detect, Solve and Avoid Related Problems.

    Science.gov (United States)

    National Center for Appropriate Technology, Butte, MT.

    Moisture problems are identified as an important element in home energy conservation programs. A systematic approach to understanding, recognizing, solving, and preventing moisture-related problems is offered in this four-section report. Section I examines the root of moisture problems. Section II discusses symptoms and causes of excess moisture…

  16. Solar Energy: Energy Conservation and Passive Design Concepts: Student Material. First Edition.

    Science.gov (United States)

    Younger, Charles; Orsak, Charles G., Jr.

    Designed for student use in "Energy Conservation and Passive Design Concepts," one of 11 courses in a 2-year associate degree program in solar technology, this manual provides readings, bibliographies, and illustrations for seven course modules. The manual, which corresponds to an instructor guide for the same course, covers the…

  17. 76 FR 22453 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-04-21

    ... Mode and Off Mode b. Automatic Cycle Termination c. Ventless Clothes Dryers d. Consumer Usage Habits e... as cooling capacity in British thermal units (Btu) per hour (h) divided by electrical input power in...

  18. 77 FR 18477 - Energy Conservation Program: Energy Conservation Standards for Battery Chargers and External...

    Science.gov (United States)

    2012-03-27

    .... Summary of the Proposed Rule A. Benefits and Costs to Consumers B. Impact on Manufacturers C. National.... Discount Rates 12. Benefits From Effects of Standards on Energy Prices H. Consumer Subgroup Analysis I... Impact Analysis a. Significance of Energy Savings b. Net Present Value of Consumer Costs and Benefits c...

  19. 77 FR 31917 - Energy Conservation Program: Energy Conservation Standards for Residential Dishwashers

    Science.gov (United States)

    2012-05-30

    .... Summary of the Direct Final Rule and Its Benefits A. Benefits and Costs to Consumers B. Impact on... Savings 5. Net Present Value of Consumer Benefit H. Consumer Subgroup Analysis I. Manufacturer Impact... another way of representing consumer NPV, plus (2) the annualized monetary value of the benefits of...

  20. 78 FR 36315 - Energy Conservation Program: Energy Conservation Standards for Standby Mode and Off Mode for...

    Science.gov (United States)

    2013-06-17

    ... of the Final Rule and Its Benefits A. Benefits and Costs to Consumers B. Impact on Manufacturers C... Value of Consumer Costs and Benefits c. Indirect Impacts on Employment 4. Impact on Utility or... Power = 2.2 watts. Microwave Ovens. A. Benefits and Costs to Consumers Table I-2 presents DOE's...

  1. 76 FR 37549 - Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and...

    Science.gov (United States)

    2011-06-27

    ............ 3.20 to 4.22......... 3.89 5.91 19.18. NPV of Consumer Benefits (2009$ billion) 3% discount rate 0... amount DOE considers significant. Under TSL 7, the NPV of consumer benefit would be -$44.98 billion..., and 23 years in the hot-dry region. At TSL 7, the fraction of consumers experiencing an LCC benefit is...

  2. 78 FR 64067 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential...

    Science.gov (United States)

    2013-10-25

    .... Inverter Controls for PSC Motors c. High-Efficiency Motors d. Multi-Stage or Modulating Heating Controls e... MPC b. Inverter-Driven PSC Costs c. Furnace Fan Motor MPC d. Motor Control Costs e. Backward-Inclined... savings is measured for the lifetime of residential furnace fans shipped in 2019-2048. The SCC values, on...

  3. 78 FR 77019 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products

    Science.gov (United States)

    2013-12-20

    ... air conditioning heat pump'' that were established in section 5 of the American Energy Manufacturing... heat pump'' product class, including the definition and standards. DATES: DOE will accept comments....gov . Table of Contents I. Background and Authority II. Discussion III. Procedural Requirements A...

  4. 78 FR 62494 - Energy Conservation Program: Energy Conservation Standards for Ceiling Fans

    Science.gov (United States)

    2013-10-22

    ... consumers' decisions about purchasing air conditioning equipment. For example: How much more or less likely are consumers to own or purchase an air conditioner if they already have a ceiling fan? How much more... and to facilitate this process, DOE has identified several related issues in this RFI on which DOE...

  5. 76 FR 52854 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-08-24

    ... justify withdrawal, is an appropriate exercise of the Secretary's discretion and use of limited resources... dependence of the analysis results on different analytical assumptions. DOE found that for the selected...

  6. 76 FR 57897 - Energy Conservation Program: Energy Conservation Standards for Certain External Power Supplies

    Science.gov (United States)

    2011-09-19

    ... Order requires agencies to examine the constitutional and statutory authority supporting any action that... required by Executive Order 13132. F. Review Under Executive Order 12988, ``Civil Justice Reform'' With... Executive Order 12988, ``Civil Justice Reform,'' 61 FR 4729 (February 7, 1996), imposes on Federal agencies...

  7. 76 FR 69122 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products...

    Science.gov (United States)

    2011-11-08

    ..., Microwave Ovens, and Electric and Gas Kitchen Ranges and Ovens) and for Certain Commercial and Industrial... reasons. List of Subjects in 10 CFR Part 431 Administrative practice and procedure, Confidential business...

  8. 75 FR 1121 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products...

    Science.gov (United States)

    2010-01-08

    ..., multi-family housing, and on-premises laundry applications led DOE to conduct a sensitivity analysis for... commercial laundry practices likely differ from residential practices,\\5\\ DOE concluded in the October 2008..., and service; (b) adverse impacts on product utility or availability; or (c) adverse impacts on health...

  9. 78 FR 55781 - Energy Conservation Program: Energy Conservation Standards for Walk-In Coolers and Freezers

    Science.gov (United States)

    2013-09-11

    ... Affiliation docket AFM Corporation AFM Manufacturer 0012.1 Air-Conditioning, Heating, and AHRI Trade... Refrigeration Products LLC. Heatcraft Manufacturer 0058.1, 0069.1 Heating, Air-conditioning & HARDI Trade.... Introduction A. Authority B. Background 1. Current Standards 2. History of Standards Rulemaking for Walk-In...

  10. 76 FR 37407 - Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and...

    Science.gov (United States)

    2011-06-27

    .... Background 1. Current Standards a. Furnaces b. Central Air Conditioners and Heat Pumps 2. History of... Compliance Requirements a. Central Air Conditioning and Heat Pumps b. Residential Furnaces 3. Duplication... residential central air conditioners and central air conditioning heat pumps (air conditioners and heat pumps...

  11. 78 FR 55889 - Energy Conservation Program: Energy Conservation Standards for Commercial Refrigeration Equipment

    Science.gov (United States)

    2013-09-11

    ... in ANSI/Air- Conditioning and Refrigeration Institute (ARI) Standard 1200-2006, appendix D. [dagger... Manufacturers C. National Benefits II. Introduction A. Authority B. Background 1. Current Standards 2. History... class terminology. ** ``TDA'' is the total display area of the case, as measured in the Air...

  12. 76 FR 22324 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-04-21

    ... standards, the current standards for room air conditioners and clothes dryers, and the history of the... Residential Clothes Dryers and Room Air Conditioners AGENCY: Office of Energy Efficiency and Renewable Energy... equipment, including residential clothes dryers and room air conditioners. EPCA also requires the U.S...

  13. 78 FR 25627 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards for...

    Science.gov (United States)

    2013-05-02

    ... average life of the product in the type (or class) compared to any increase in the price of, or in the... well as the market penetration of such equipment. b. Three-Phase Equipment With an Input Capacity Less... standards. This is done by applying a markup multiplier to the manufacturer's [[Page 25632

  14. 77 FR 31964 - Energy Conservation Program: Energy Conservation Standards for Residential Dishwashers

    Science.gov (United States)

    2012-05-30

    ... Costs (Annualized) of the Standards III. Public Participation A. Submission of Comments B. Public..., DOE received the ``Agreement on Minimum Federal Efficiency Standards, Smart Appliances, Federal... submitted by groups representing manufacturers (the Association of Home Appliance Manufacturers (AHAM...

  15. 75 FR 10873 - Energy Conservation Program: Energy Conservation Standards for Small Electric Motors

    Science.gov (United States)

    2010-03-09

    ... and Kilowatt Ratings i. Summary 2. Product Classes B. Screening Analysis C. Engineering Analysis 1. Product Classes Analyzed 2. Baseline Models a. Baseline Efficiencies b. Baseline Temperature Rise c... discuss, and receive comments on, these subjects, DOE's proposed product classes, potential standard...

  16. 77 FR 59719 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Washers

    Science.gov (United States)

    2012-10-01

    ... to include emissions that occur in manufacturing or transport of appliances. EPCA directs DOE to... with less automation and more labor than some of the larger competitors. To change the design of their...

  17. 76 FR 67037 - Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and...

    Science.gov (United States)

    2011-10-31

    ..., including trends derived using the experience curve approach. AGA and APGA stated that DOE's experience... and APGA using DOE's model, DOE has concluded that its model (which remains unchallenged in terms of... forecast has been trending downward over the last several years; (5) DOE's use of the AEO 2010 Reference...

  18. 78 FR 62988 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products and...

    Science.gov (United States)

    2013-10-23

    ....gov/cases/ee/tee0010.pdf ) (last accessed September 2010); 76 FR 37408, 37514, 37541-42 (June 27, 2011... rulemaking process. 68 FR 7990. DOE has made its procedures and policies available on the Office of the... requires agencies to examine the constitutional and statutory authority supporting any action that would...

  19. 77 FR 7281 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers

    Science.gov (United States)

    2012-02-10

    ... Electrical Efficiencies for all Liquid-Immersed Distribution Transformer Equipment Classes (Compliance... ``customers.'' Customers refer to electric utilities in the case of liquid-immersed transformers, and to... for Determining Energy Efficiency for Distribution Transformers'' published by the National Electrical...

  20. 78 FR 23335 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers

    Science.gov (United States)

    2013-04-18

    ... nominal EL values. Table I.5--Electrical Efficiencies for All Liquid-Immersed Distribution Transformer... 2,500 99.53 Table I.6--Electrical Efficiencies for All Low-Voltage Dry-Type Distribution Transformer... Transformers'' published by the National Electrical Manufacturers Association (NEMA TP 1-2002). [[Page 23343...

  1. 75 FR 23191 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Certain...

    Science.gov (United States)

    2010-05-03

    ... Impact Analysis The NIA estimates the national energy savings (NES) and the net present value (NPV) of... to public comments. Accordingly, DOE intends to present the results of its analyses in the notice of... the real consumer cost of capital and puts the LCC in present-value terms. The PBP represents the...

  2. 75 FR 41102 - Energy Conservation Program: Energy Conservation Standards for Furnace Fans: Reopening of Public...

    Science.gov (United States)

    2010-07-15

    ... Furnace Fans: Reopening of Public Comment Period AGENCY: Office of Energy Efficiency and Renewable Energy... work of residential heating and cooling systems (``furnace fans''). The comment period closed on July 6... information relevant to the furnace fan rulemaking will be accepted until July 27, 2010. ADDRESSES: Interested...

  3. 77 FR 16769 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and...

    Science.gov (United States)

    2012-03-22

    ... provisions from AHRI operations manuals (OMs) in its test procedures that would clarify the application of... Compressor Break-In Period.... Small Unitary OM 3.8 (Break-in Certain AHRI OMs DOE is proposing to Operation... equipment class. Period). hours. Tolerances Multiple OMs.... N/A Certain AHRI OMs and Compliance with DOE...

  4. 77 FR 28927 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and...

    Science.gov (United States)

    2012-05-16

    ... provisions (with some modification) from AHRI operations manuals (AHRI OMs) that would harmonize equipment... DOE published for notice and comment. By adopting some of the guidance in the AHRI OMs, DOE hopes to... and DOE-initiated testing. In certain cases, the AHRI OMs require manufacturers to provide information...

  5. 75 FR 80292 - Energy Conservation Program: Energy Conservation Standards for Electric Motors

    Science.gov (United States)

    2010-12-22

    ... horsepower, manufactured (alone or as a component of another piece of equipment) after December 19, 2010, to... Design B, six-pole open motors rated 250, 300, and 350 horsepower are not consistent with the EISA 2007... component of another piece of equipment), on or after December 19, 2010, shall have a nominal full load...

  6. 76 FR 57515 - Energy Conservation Program: Energy Conservation Standards for Residential Refrigerators...

    Science.gov (United States)

    2011-09-15

    ... Contents I. Summary of the Final Rule and Its Benefits II. Introduction A. Authority B. Background 1... Wine Coolers From This Rulemaking 2. Product Classes a. General Discussion Regarding Added Product... Cost per Unit 4. Site-to-Source Energy Conversion 5. Discount Rates 6. Benefits From Effects of...

  7. 75 FR 59469 - Energy Conservation Program: Energy Conservation Standards for Residential Refrigerators...

    Science.gov (United States)

    2010-09-27

    .... Methodology and Discussion A. Market and Technology Assessment 1. Exclusion of Wine Coolers From This.... Benefits From Effects of Standards on Energy Prices H. Consumer Subgroup Analysis I. Manufacturer Impact.... Net Present Value of Consumer Costs and Benefits c. Indirect Impacts on Employment 4. Impact on...

  8. 78 FR 42389 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2013-07-16

    ... conditioners without reverse cycle and with louvered sides as 24,999 British thermal units per hour (Btu/ h... and with louvered sides as 25,000 Btu/h, rather than 27,999 Btu/h and 28,000 Btu/h, respectively...: Stephen L. Witkowski, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy...

  9. 76 FR 52852 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-08-24

    ... INFORMATION CONTACT: Stephen L. Witkowski, U.S. Department of Energy, Office of Energy Efficiency and...-0121, (202) 586-7463, e-mail: stephen[email protected] . Ms. Elizabeth Kohl, U.S. Department of... paragraphs (b) and (h) to read as follows: Sec. 430.32 Energy and water conservation standards and their...

  10. 76 FR 26656 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-05-09

    ... (202) 586-2945 or e-mail: [email protected] . FOR FURTHER INFORMATION CONTACT: Stephen L...: stephen[email protected] . Ms. Elizabeth Kohl, U.S. Department of Energy, Office of General Counsel.... 6291-6309; 28 U.S.C. 2461 note. 2. Revise Sec. 430.32 paragraphs (b), and (h) to read as follows: Sec...

  11. 75 FR 27227 - Energy Conservation Program: Energy Conservation Standards for Residential Central Air...

    Science.gov (United States)

    2010-05-14

    ...-7335. E-mail: Wes.Anderson@ee.doe.gov . Ms. Elizabeth Kohl, U.S. Department of Energy, Office of the... additional information regarding visiting the Resource Room. FOR FURTHER INFORMATION CONTACT: Mr. Wes Anderson, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building...

  12. 76 FR 39245 - Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and...

    Science.gov (United States)

    2011-07-06

    ... Wes.Anderson@ee.doe.gov . Mr. Eric Stas or Ms. Jennifer Tiedeman, U.S. Department of Energy, Office of.... Wesley Anderson (central air conditioners and heat pumps), U.S. Department of Energy, Office of Energy...

  13. 76 FR 71835 - Energy Conservation Program: Energy Conservation Standards for Direct Heating Equipment

    Science.gov (United States)

    2011-11-18

    ..., Public Meeting Transcript, No. 14 at pp. 94-95) The Air- conditioning, Heating, and Refrigeration... realistic simulation of a wood burning fire in a wood burning fireplace, not to provide heat. (R.H. Peterson...

  14. 77 FR 2355 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and...

    Science.gov (United States)

    2012-01-17

    ... advantages; distributive impacts; and equity); (4) to the extent feasible, specify performance objectives... Defense Council (NRDC), the Northwest Energy Efficiency Alliance (NEEA), and the Northwest Power and... Strategic Plan commits the Department to reviewing minimum appliance efficiency standards at least every 5...

  15. 76 FR 25622 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards for...

    Science.gov (United States)

    2011-05-05

    ... also requires that each time the corresponding consensus standard--the American Society of Heating... this analysis, as well as the submission of data and other relevant information. DATES: DOE will accept... Information Number (RIN) 1904-AC47. Comments may be submitted using any of the following methods: 1. Federal e...

  16. 77 FR 32381 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Washers

    Science.gov (United States)

    2012-05-31

    ... on a CD. It is not necessary to include printed copies. 4. Hand Delivery/Courier: Ms. Brenda Edwards... washers under TSL 3, the first number for consumer impacts refers to the standard in 2015, and the second... the value of CO 2 reductions is based on a global value. Second, the assessments of operating cost...

  17. Energy Conservation Projects to Benefit the Railroad Industry

    Energy Technology Data Exchange (ETDEWEB)

    Clifford Mirman; Promod Vohra

    2009-12-31

    The Energy Conservation Projects to benefit the railroad industry using the Norfolk Southern Company as a model for the railroad industry has five unique tasks which are in areas of importance within the rail industry, and specifically in the area of energy conservation. The NIU Engineering and Technology research team looked at five significant areas in which research and development work can provide unique solutions to the railroad industry in energy the conservation. (1) Alternate Fuels - An examination of various blends of bio-based diesel fuels for the railroad industry, using Norfolk Southern as a model for the industry. The team determined that bio-diesel fuel is a suitable alternative to using straight diesel fuel, however, the cost and availability across the country varies to a great extent. (2) Utilization of fuel cells for locomotive power systems - While the application of the fuel cell has been successfully demonstrated in the passenger car, this is a very advanced topic for the railroad industry. There are many safety and power issues that the research team examined. (3) Thermal and emission reduction for current large scale diesel engines - The current locomotive system generates large amount of heat through engine cooling and heat dissipation when the traction motors are used to decelerate the train. The research team evaluated thermal management systems to efficiently deal with large thermal loads developed by the operating engines. (4) Use of Composite and Exotic Replacement Materials - Research team redesigned various components using new materials, coatings, and processes to provide the needed protection. Through design, analysis, and testing, new parts that can withstand the hostile environments were developed. (5) Tribology Applications - Identification of tribology issues in the Railroad industry which play a significant role in the improvement of energy usage. Research team analyzed and developed solutions which resulted in friction

  18. Automatic Construction of Java Programs from Functional Program Specifications

    OpenAIRE

    Md. Humayun Kabir

    2015-01-01

    This paper presents a novel approach to construct Java programs automatically from the input functional program specifications on natural numbers from the constructive proofs of the input specifications using an inductive theorem prover called Poiti'n. The construction of a Java program from the input functional program specification involves two phases. The theorem prover is used to construct a higher order functional (HOF) program from the input specification expressed as an existential the...

  19. Developing sustainable energy policies for electrical energy conservation in Saudi Arabia

    International Nuclear Information System (INIS)

    Al-Ajlan, S.A.; Al-Ibrahim, A.M.; Abdulkhaleq, M.; Alghamdi, F.

    2006-01-01

    Towards the end of 1998, the Saudi Arabian electricity sector embarked upon a major restructuring program. One of the aims of the program is to achieve sustainable performance. Although progress has been made, a number of challenges remain, including high demand growth, low generation capacity reserve margins, inefficient energy use, absence of time-of-use tariffs, and the need for large capital investments to meet current and future expansion. Electrical energy consumption in Saudi Arabia increased sharply during the last two decades due to rapid economic development and the absence of energy conservation measures. Peak loads reached nearly 24GW in 2001-25 times their 1975 level-and are expected to approach 60GW by 2023. The total investment needed to meet this demand may exceed $90 billion. Consequently, there is an urgent need to develop energy conservation policies for sustainable development. Current sustainable policies, particularly those pertaining to energy conservation, led to peak load savings of more than 871MW in 2001, mainly as a result of collaborations between the Ministry of Water and Electricity and the Saudi Electricity Company. In the long term, however, unless sustainable energy policies are developed at a national level, such efforts will be largely ineffective. To address this, policies and programs are being developed for public awareness, energy regulation and legislation, and energy information and programming. If energy conservation is taken into account, the forecast demand can be reduced by 5-10%. This is equivalent to 3-6GW of additional capacity, which represents a possible $1.5-3.0 billion saving over the next 20 years. Typically, investment in energy efficiency is 1% of utility sales revenues, which for a country like Saudi Arabia could be $15-60 million p.a. If only savings on air conditioning are considered, the return on investment is equivalent to 400-500MW p.a. of generating capacity-a saving of up to $0.25 billion p.a. In this

  20. Developing sustainable energy policies for electrical energy conservation in Saudi Arabia

    Energy Technology Data Exchange (ETDEWEB)

    Al-Ajlan, S.A. [Energy Research Institute, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442 (Saudi Arabia)]. E-mail: salajlan@kacst.edu.sa; Al-Ibrahim, A.M. [Energy Research Institute, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442 (Saudi Arabia); Abdulkhaleq, M. [Ministry of Water and Electricity (Saudi Arabia); Alghamdi, F. [Ministry of Water and Electricity (Saudi Arabia)

    2006-09-15

    Towards the end of 1998, the Saudi Arabian electricity sector embarked upon a major restructuring program. One of the aims of the program is to achieve sustainable performance. Although progress has been made, a number of challenges remain, including high demand growth, low generation capacity reserve margins, inefficient energy use, absence of time-of-use tariffs, and the need for large capital investments to meet current and future expansion. Electrical energy consumption in Saudi Arabia increased sharply during the last two decades due to rapid economic development and the absence of energy conservation measures. Peak loads reached nearly 24GW in 2001-25 times their 1975 level-and are expected to approach 60GW by 2023. The total investment needed to meet this demand may exceed $90 billion. Consequently, there is an urgent need to develop energy conservation policies for sustainable development. Current sustainable policies, particularly those pertaining to energy conservation, led to peak load savings of more than 871MW in 2001, mainly as a result of collaborations between the Ministry of Water and Electricity and the Saudi Electricity Company. In the long term, however, unless sustainable energy policies are developed at a national level, such efforts will be largely ineffective. To address this, policies and programs are being developed for public awareness, energy regulation and legislation, and energy information and programming. If energy conservation is taken into account, the forecast demand can be reduced by 5-10%. This is equivalent to 3-6GW of additional capacity, which represents a possible $1.5-3.0 billion saving over the next 20 years. Typically, investment in energy efficiency is 1% of utility sales revenues, which for a country like Saudi Arabia could be $15-60 million p.a. If only savings on air conditioning are considered, the return on investment is equivalent to 400-500MW p.a. of generating capacity-a saving of up to $0.25 billion p.a. In this

  1. IRM National Reference Series: Japan: An evaluation of government-sponsored energy conservation research and development

    Energy Technology Data Exchange (ETDEWEB)

    Howard, C.D.

    1987-07-01

    Despite the recent drop in world oil prices, the Japanese government is continuing to stress energy conservation, because Japan relies on imports for 85% of its total energy requirements and virtually 100% of its petroleum. Japan stresses long-term developments and sees conservation as an integral part of its 50- to 100-year transition from fossil fuels to nuclear and renewable sources of energy. The Japanese government is targeting new materials, biotechnology, and electronics technologies as the foundation of Japan's economy in the 21st century. Most government research programs in Japan are governed by aggressive timetables and fixed technical goals and are usually guaranteed funding over a 5- to 10-year period. Of the major energy conservation research programs, the best known is the Moonlight Project, administered by the Ministry of International Trade and Industry (MITI), and oriented towards end-use technologies such as Stirling engines and advanced heat pumps. Parts of MITI's Basic Technologies for Future Industries Program involve research in new materials and bioreactors. The Science and Technology Agency's Exploratory Research in Advanced Technologies (ERATO) Program is also investigating these technologies while emphasizing basic research. Other ministries supporting research related to energy conservation are the Ministry of Education, Science, and Culture and the Ministry of Construction. For 1985, government spending for energy conservation research was at least $50 million. Private sector funding of energy conservation research was $500 million in 1984. A brief outline of major programs and key participants is included for several of the most relevant technologies. An overview of Japan's experience in international scientific collaboration is also included.

  2. Energy conservation and efficiency in Giprokoks designs at Ukrainian ferrous-metallurgical enterprises

    Energy Technology Data Exchange (ETDEWEB)

    M.I. Fal' kov [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

    2009-07-15

    Energy conditions at Ukrainian ferrous-metallurgical enterprises are analyzed. Measures to boost energy conservation and energy efficiency are proposed: specifically, the introduction of systems for dry slaking of coke; and steam-gas turbines that employ coke-oven gas or a mixture of gases produced at metallurgical enterprises. Such turbines may be built from Ukrainian components.

  3. Energy conservation opportunities: audit vis-a-vis mine productivity

    Energy Technology Data Exchange (ETDEWEB)

    Iyer, G.H.

    2009-07-01

    Mining operation, whether opencast or underground, with modern equipment is highly energy intensive, needing energy conservation and management to ensure efficiency, cost effectiveness, and overall productivity. Exhaustible primary energy resources such as coal, lignite, oil, and nuclear fuels are being mined out to meet our energy needs. An attempt has been made in this paper to highlight the energy conservation opportunities, energy audit, the relevant Energy Conservation Act 2001 and certain energy saving measures leading to higher productivity followed by a few case study examples. 3 refs.

  4. State energy conservation plan for New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-01-01

    The energy-savings and energy-management programs set up by state agencies in New Mexico are presented. Also the energy-savings and energy-management programs for public schools are presented. Plans and summaries are also given for the following program: solar water heaters for secondary schools; solar portable classroom demonstration; energy-savings and energy-management programs for county and municipal governments; energy-savings programs for commercial and residential sectors; weatherization; solar sustenance; energy-savings programs for hospitals and industrial buildings; carpools and vanpools; a program encouraging compliance with the national 55-mph speed limit; waste-oil recycling; utilitites; agriculture; procurement; modification; public information; and an administrative packet containing information on how to facilitate internal accounting procedures.

  5. Selecting appropriate energy efficiency indicators for the Thai Energy Conservation Promotion Programme. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Eichhammer, W.; Gruber, E.; Cremer, C.

    2000-06-01

    In 1992 the Thai Government passed the Energy Conservation Promotion (ECP) Act to improve energy efficiency in Thai industry and commerce. The Thai-German Energy Efficiency Promotion Project (ENEP) is supporting the Department of Energy Development and Promotion (DEDP) in its effort to implement the Energy Conservation Program for large buildings and designated factories. About 4000 buildings and factories under the Compulsory Program, have to report every 6 months their energy consumption data to DEDP. Every 3 years energy audits have to be conducted by registered energy consultants, to identify energy saving opportunities, to set saving targets and to recommend energy conservation measures. Investments in energy efficient technologies are subsidized from an Energy Conservation Fund. Data from the energy consumption reports and the energy audit reports are collected in DEDP's database for further processing. The database is structured according to the Thai Standard Industrial Classification. In order to exploit the wealth of information provided by the auditing procedure the objective of the present work carried out by the consultant FhG-ISI for DEDP/BERC on behalf of the German Gesellschaft fuer Technische Zusammenarbeit (GTZ) was to recommend an appropriate set of energy efficiency indicators. This indicator set should allow DEDP to extract from the energy consumption reports, energy audit reports and other sources, useful statistical information to monitor and improve energy efficiency in Thailand. (orig.)

  6. Energy prices and the promotion of energy conservation. A background study for energy conservation programme

    International Nuclear Information System (INIS)

    1994-01-01

    The prices of fuels in the international markets affect the development of consumer prices of energy in Finland. In the near future no factors can be foreseen, which would cause major increases in the prices of oil, coal or gas. It can thus not be expected that increased fuel prices would motivate more efficient energy conservation. In international comparison, consumer prices of energy have been relatively low in Finland. This applies especially to electricity. After the removal of price controls, energy prices have been determined by the markets. The influence of the public authorities in energy pricing is put into effect through taxation. The price of energy has a fairly small effect on energy consumption in a short term, but longer term effects are more significant. Energy products are faxed in all western countries. (orig.)

  7. Energy conservation: a requirement of the present time

    International Nuclear Information System (INIS)

    Alcoforado, Fernando Antonio Goncalves

    1993-01-01

    The origins of the financial crisis that affects the Brazilian electrical sector is presented. The options available to overcome this situation and the role played by energy conservation are described. 7 refs

  8. Energy conservation measures adopted at Heavy Water Plant, Manuguru

    International Nuclear Information System (INIS)

    Gupta, R.V.; Venugopal, M.

    1997-01-01

    The importance of conservation of energy is well recognised all over the world as the world reserves of fossil fuels will eventually run out depending on the rate of their use. This paper deals with various energy conservation schemes adopted at Heavy Water Plant, Manuguru (HWPM). Most energy conservation measures offer large financial saving with very short pay back periods. This fact has been well recognised by the management of HWPM as well as Heavy Water Board and their wholehearted and enthusiastic approach to energy conservation and energy management yielded very good results in reducing the operating cost. The process of energy conservation is not a one time exercise. Persistent efforts are on to identify the areas like condition of heat exchangers, margins in control valves, steam and condensate leakages etc. for further reduction in energy consumption

  9. Energy conservation campaign at Sandvik AB in Sandviken

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, Rune

    1979-07-01

    Sandvik AB's performed an analysis showing oil consumption for steam production was increasing considerably. Energy conservation measures were implemented to decrease the oil consumption and to make lasting changes.

  10. Balancing act: Government roles in an energy conservation network

    NARCIS (Netherlands)

    Peterman, A.; Kourula, A.; Levitt, R.

    2014-01-01

    Government-led interorganizational alliance networks present a sensible opportunity to overcome many societal challenges through collaborative governance. In particular, few researchers have studied alliance networks in the field of energy conservation in commercial buildings—a sector with unique

  11. Determination analysis of energy conservation standards for distribution transformers

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, P.R.; Van Dyke, J.W.; McConnell, B.W.; Das, S.

    1996-07-01

    This report contains information for US DOE to use in making a determination on proposing energy conservation standards for distribution transformers as required by the Energy Policy Act of 1992. Potential for saving energy with more efficient liquid-immersed and dry-type distribution transformers could be significant because these transformers account for an estimated 140 billion kWh of the annual energy lost in the delivery of electricity. Objective was to determine whether energy conservation standards for distribution transformers would have the potential for significant energy savings, be technically feasible, and be economically justified from a national perspective. It was found that energy conservation for distribution transformers would be technically and economically feasible. Based on the energy conservation options analyzed, 3.6-13.7 quads of energy could be saved from 2000 to 2030.

  12. Energy savings potential from energy-conserving irrigation systems

    Energy Technology Data Exchange (ETDEWEB)

    Wilfert, G.L.; Patton, W.P.; Harrer, B.J.; Clark, M.A.

    1982-11-01

    This report systematically compares, within a consistent framework, the technical and economic characteristics of energy-conserving irrigation systems with those of conventional irrigation systems and to determine total energy savings. Levelized annual costs of owning and operating both energy-conserving and conventional irrigation systems have been developed and compared for all 17 states to account for the differences in energy costs and irrigation conditions in each state. Market penetration of energy-conserving systems is assessed for those systems having lower levelized annual costs than conventional systems performing the same function. Annual energy savings were computed by matching the energy savings per system with an assumed maximum market penetration of 100 percent in those markets where the levelized annual costs of energy-conserving systems are lower than the levelized annual costs of conventional systems.

  13. Energy Conservation and Passive Solar Techniques in Campus Renovation.

    Science.gov (United States)

    Probasco, Jack; And Others

    1981-01-01

    The analysis of a building from an energy conservation and passive solar potential has three aspects: building envelope, landscaping, and room utilization. Typical conservation and solar control modifications are listed. (Author/MLF)

  14. Labor and energy impacts of energy-conservation measures

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Three papers are presented discussing the labor and energy impacts of energy-conservation measures, namely: Generation of the Industry/Occupation Wage Matrix and Related Matters, by Carole Green; Job Shifts from Energy Conservation (Salary Distribution Effects), by Robert A. Herendeen; and Energy and Labor Implication of Improving Thermal Integrity of New Houses, by John Joseph Nangle. A separate abstract was prepared for each paper.

  15. Protocol Monitoring Energy Conservation; Protocol Monitoring Energiebesparing

    Energy Technology Data Exchange (ETDEWEB)

    Boonekamp, P.G.M. [ECN Beleidsstudies, Petten (Netherlands); Mannaerts, H. [Centraal Planburea CPB, Den Haag (Netherlands); Tinbergen, W. [Centraal Bureau voor de Statistiek CBS, Den Haag (Netherlands); Vreuls, H.H.J. [Nederlandse onderneming voor energie en milieu Novem, Utrecht (Netherlands); Wesselink, B. [Rijksinstituut voor Volksgezondheid en Milieuhygiene RIVM, Bilthoven (Netherlands)

    2001-12-01

    On request of the Dutch ministry of Economic Affairs five institutes have collaborated to create a 'Protocol Monitoring Energy Conservation', a common method and database to calculate the amount of energy savings realised in past years. The institutes concerned are the Central Bureau of Statistics (CBS), the Netherlands Bureau for Economic Policy Analysis (CPB), the Energy research Centre of the Netherlands (ECN), the National Agency for Energy and Environment (Novem) and the Netherlands Institute of Public Health and the Environment (RIVM). The institutes have agreed upon a clear definition of energy use and energy savings. The demarcation with renewable energy, the saving effects of substitution between energy carriers and the role of import and export of energy have been elaborated. A decomposition method is used to split up the observed change in energy use in a number of effects, on a national and sectoral level. This method includes an analysis of growth effects, effects of structural changes in production and consumption activities and savings on end use or with more efficient conversion processes. To calculate these effects the total energy use is desegregated as much as possible. For each segment a reference energy use is calculated according to the trend in a variable which is supposed to be representative for the use without savings. The difference with the actual energy use is taken as the savings realised. Results are given for the sectors households, industry, agriculture, services and government, transportation and the energy sector; as well as a national figure. A special feature of the protocol method is the application of primary energy use figures in the determination of savings for end users. This means that the use of each energy carrier is increased with a certain amount, according to the conversion losses caused elsewhere in the energy system. The losses concern the base year energy sector and losses abroad for imports of secondary

  16. 1999 annual progress report -- Energy conservation team

    Energy Technology Data Exchange (ETDEWEB)

    Chalk, S. (EERE OTT Office of Advanced Automotive Technologies Energy Conversion Team Leader)

    1999-10-19

    This report highlights progress achieved during FY 1999 under the Light-duty Fuels Utilization R and D Program. The program is comprised of two elements: the Advanced Petroleum-Based APB Fuels Program which focused on developing and testing advanced fuels for use with compression-ignition direct-injection (CIDI) engines and fuel cells and the Alternative Fuels Program which focused on Natural gas and natural gas derived fuels. The report contains 17 summaries of industry and National Laboratory projects. Fuel efficient vehicles with very low emissions are essential to meet the challenges of climate change, energy security, and improved air quality. The authors anticipate cooperative efforts with the auto and energy industries to develop new and innovative technologies that will be used to make advanced transportation vehicles that are fuel efficient, clean, and safe.

  17. Implementing China's national energy conservation policies at state-owned electric power generation plants

    International Nuclear Information System (INIS)

    Zhao Xiaofan; Ortolano, Leonard

    2010-01-01

    China's 11th Five-Year Guideline identified energy conservation as one of the country's fundamental policies and established a mandatory target: 20% reduction in national average energy intensity by 2010. Despite the various policies, laws, and administrative reforms to support energy conservation, China fell behind schedule for meeting its conservation targets in 2006 and 2007. Using a combination of available literature and an interview-based case study, this paper examines the implementation of energy conservation and investigates impediments to achieving China's conservation goal in the electric power generation sector. Three key impediments are detailed: (1) municipal governments' incentives to overlook conservation-related central directives primarily because of budget pressures linked to financial decentralization, (2) procedural obstacles in the form of time required to obtain project approvals for high-efficiency power generation units, and (3) financial obstacles making it difficult for power generation enterprises to raise capital for energy conservation projects. An interview-based case study of a state-owned coal-fired electric power generation company demonstrates the influence of the aforementioned obstacles. While procedural obstacles are notable, they can be managed. However, electricity pricing reforms and/or stronger subsidy programs will be needed to address the financial obstacles facing Chinese power generation companies.

  18. Problems in the implementation of energy conservation measures. II. Consumer motivation

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, P. H.

    1977-10-15

    During the course of 1975 a national survey of household attitudes to energy use and conservation was undertaken. The study suggested that while the public are generally in favor of energy conservation, they do not practice it. The study highlighted the need to do more than merely raise the level of awareness of the need for energy conservation. The energy intensive nature of our life-style was identified as a critical constraint on the implementations of effective voluntary energy conservation programs. It was suggested that our pattern of energy use is so deeply embedded in our everyday behaviors that it would take more than the presentation of information to produce the necessary changes in behavior. Some of the problems involved in attempting to motivate the consumer to conserve energy using either an extrinsic or instrinsic motivational approach are explored. A general model of the energy system is employed to illustrate that changes in the informational environment must be accompanied by changes in the institutional environment if pro-conservation attitudes are to be converted into conserving behavior. The case of personal transportation is used to indicate the need for a comprehensive package of measures which not only motivate the consumer but also facilitate and reinforce positive behavior if the dual goals of satisfying personal mobility needs and energy conservation are to be satisfied.

  19. DOE uranium enrichment program. Hearing before the Subcommittee on Energy Conservation and Power of the Committee on Energy and Commerce, House of Representatives, Ninety-Ninth Congress, Second Session, February 19, 1986

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    Six witnesses representing the Congressional Budget Office, DOE, the National Taxpayers Union, the Edison Electric Institute, and the General Accounting Office testified on the implications of the uranium enrichment program to the national deficit. The program's $1.6 billion annual budget makes it DOE's largest program, but its benefits are aimed more at the nuclear utility customers at the expense of taxpayers. The administration's proposal to write off unrecovered costs will further hurt taxpayers, and is counter to its philosophy of allowing market forces to operate. The hearing addressed DOE's proposals for improving the economics of the program. Additional material for the record follows the testimony

  20. Motivation: its role in energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Jones, J. E.; Kingsley, K. J.

    1979-07-01

    The program at International Kaiser Aluminum and Chemical Corporation to motivate people by emphasizing the importance of the individual to save energy is described. Three major areas of conservation in the industry considered important since they identify the different motivational approaches needed that are discussed are manufacture, recycling, and by conversion to energy saving products. The importance of communication, participation, and recognition are emphasized. (MCW)

  1. Consumer energy - conservation policy: an analytical approach

    Energy Technology Data Exchange (ETDEWEB)

    McDougall, G.H.G.; Ritchie, J.R.B.

    1984-06-01

    To capture the potential energy savings available in the consumer sector an analytical approach to conservation policy is proposed. A policy framework is described, and the key constructs including a payoff matrix analysis and a consumer impact analysis are discussed. Implications derived from the considerable amount of prior consumer research are provided to illustrate the effect on the design and implementation of future programs. The result of this analytical approach to conservation policy (economic stability and economic security) are goals well worth pursuing. 13 references, 2 tables.

  2. Advances in Energy Conservation of China Steel Industry

    Directory of Open Access Journals (Sweden)

    Wenqiang Sun

    2013-01-01

    Full Text Available The course, technical progresses, and achievements of energy conservation of China steel industry (CSI during 1980–2010 were summarized. Then, the paper adopted e-p method to analyze the variation law and influencing factors of energy consumptions of large- and medium-scale steel plants within different stages. It is pointed out that energy consumption per ton of crude steel has been almost one half lower in these thirty years, with 60% as direct energy conservation owing to the change of process energy consumption and 40% as indirect energy conservation attributed to the adjustment of production structure. Next, the latest research progress of some key common technologies in CSI was introduced. Also, the downtrend of energy consumption per ton of crude steel and the potential energy conservation for CSI during 2011–2025 were forecasted. Finally, it is indicated that the key topic of the next 15 years’ research on the energy conservation of CSI is the synergistic operation of material flow and energy flow. It could be achieved by the comprehensive study on energy flow network optimization, such as production, allocation, utilization, recovery, reuse, and resource, according to the energy quantity, quality, and user demand following the first and second laws of thermodynamics.

  3. Advances in energy conservation of China steel industry.

    Science.gov (United States)

    Sun, Wenqiang; Cai, Jiuju; Ye, Zhu

    2013-01-01

    The course, technical progresses, and achievements of energy conservation of China steel industry (CSI) during 1980-2010 were summarized. Then, the paper adopted e-p method to analyze the variation law and influencing factors of energy consumptions of large- and medium-scale steel plants within different stages. It is pointed out that energy consumption per ton of crude steel has been almost one half lower in these thirty years, with 60% as direct energy conservation owing to the change of process energy consumption and 40% as indirect energy conservation attributed to the adjustment of production structure. Next, the latest research progress of some key common technologies in CSI was introduced. Also, the downtrend of energy consumption per ton of crude steel and the potential energy conservation for CSI during 2011-2025 were forecasted. Finally, it is indicated that the key topic of the next 15 years' research on the energy conservation of CSI is the synergistic operation of material flow and energy flow. It could be achieved by the comprehensive study on energy flow network optimization, such as production, allocation, utilization, recovery, reuse, and resource, according to the energy quantity, quality, and user demand following the first and second laws of thermodynamics.

  4. Energy conservation and management strategies in Heavy Water Plants

    International Nuclear Information System (INIS)

    Kamath, H.S.

    2002-01-01

    In the competitive industrial environment it is essential that cost of the product is kept at the minimum possible. Energy conservation is an important aspect in achieving this as energy is one of the key recourses for growth and survival of industry. The process of heavy water production being very complex and energy intensive, Heavy Water board has given a focussed attention for initiating various measures for reducing the specific energy consumption in all the plants. The initiative resulted in substantial reduction in specific energy consumption and brought in savings in cost. The cumulative reduction of specific energy consumption has been over 30% over the last seven years and the total savings for the last three years on account of the same has been about Rs. 190 crore. The paper describes the strategies adopted in the heavy water plants for effecting the above achievements. The paper covers the details of some of the energy saving schemes carried out at different heavy water plants through case studies. The case studies of schemes implemented at HWPs are general in nature and is applicable for any other industry. The case studies cover the modifications with re-optimisation of the process parameters, improvements effected in utility units like refrigeration and cooling water systems, improvements in captive power plant cycle and improved recycle scheme for water leading to reduced consumptions. The paper also mentions the innovative ammonia absorption refrigeration with improved coefficient of performance and HWB's efforts in development of the system as an integrated unit of the ammonia water deuterium exchange process for heavy water production. HWB also has taken up R and D on various other schemes for improvements in energy consumption for future activities covering utilisation of low grade energy for generation of refrigeration. (author)

  5. Dark Energy from Violation of Energy Conservation.

    Science.gov (United States)

    Josset, Thibaut; Perez, Alejandro; Sudarsky, Daniel

    2017-01-13

    In this Letter, we consider the possibility of reconciling metric theories of gravitation with a violation of the conservation of energy-momentum. Under some circumstances, this can be achieved in the context of unimodular gravity, and it leads to the emergence of an effective cosmological constant in Einstein's equation. We specifically investigate two potential sources of energy nonconservation-nonunitary modifications of quantum mechanics and phenomenological models motivated by quantum gravity theories with spacetime discreteness at the Planck scale-and show that such locally negligible phenomena can nevertheless become relevant at the cosmological scale.

  6. Exploration of energy conservation opportunities through energy audit

    International Nuclear Information System (INIS)

    Swain, R.K.; Swain, A.K.; Subudhi, B.

    1994-01-01

    Developing countries like India, has to cater the imbalance of energy between the supply and demand in almost all the sectors, so as to devise energy conservation strategies. Electricity is one of the most convenient form of energy gifted to the mankind. The raising cost of electricity and the need to raise large resources to meet the required demand is only at the most of other important assets of the country. This gap between demand and supply can be partially met by appropriate energy conservation schemes through energy audit- a scientific approach for balancing the supply and demand. India has to go a long way ahead in it, therefore, energy audit has been initiated at vulnerable energy consuming places. This paper presents the effectiveness of energy audit strategy in achieving energy conservation. The energy audit of Shrama Shakti Bhavan, an office complex at New Delhi, has been taken as a case study for this work. (author). 2 refs., 12 tabs

  7. Exploration of energy conservation opportunities through energy audit

    International Nuclear Information System (INIS)

    Swain, R.K.; Swain, A.K.; Subudhi, B.

    1995-01-01

    Developing countries like India, has to cater to the imbalance of energy between the supply and demand in almost all the sectors, so as to devise energy conservation strategies. Electricity is one of the most convenient form of energy gifted to the mankind. The raising cost of electricity and the need to raise large resources to meet the required demand is only at the cost of other important assets of the country. This gap between demand and supply can be partially met by appropriate energy conservation schemes through energy audit- a scientific approach for balancing the supply and demand. India has to go a long way ahead in it, therefore, energy audit has been initiated at vulnerable energy consuming places. This paper presents the effectiveness of energy audit strategy in achieving energy conservation. The energy audit of Shrama Shakti Bhavan, an office complex at New Delhi, has been taken as a case study. (author). 2 refs., 12 tabs

  8. Energy conservation techniques as innovations, and their diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Darley, J M

    1978-04-01

    Many effective products, procedures, and techniques for achieving energy conservation have been discovered by researchers. This paper focuses on the conditions under which these procedures and techniques will be adopted voluntarily. It is suggested, first, that an economic incentive for the utilization of those energy-conserving techniques is not a sufficient condition for their adoption, and second, that a psychologically-based theory of the diffusion of innovation will identify the critical variables for promoting the adoption of energy-conserving products and techniques. Based on preliminary, small-scale observations of homeowners' reactions to a complex, time-controlled thermostat, the initial parameters of a diffusion theory for energy innovation are suggested.

  9. Energy conservation. Federal shared energy savings contracting

    International Nuclear Information System (INIS)

    Fultz, Keith O.; Milans, Flora H.; Kirk, Roy J.; Welker, Robert A.; Sparling, William J.; Butler, Sharon E.; Irwin, Susan W.

    1989-04-01

    A number of impediments have discouraged federal agencies from using shared energy savings contracts. As of November 30, 1988, only two federal agencies - the U.S. Postal Service (USPS) and the Department of the Army -had awarded such contracts even though they can yield significant energy and cost savings. The three major impediments we identified were uncertainty about the applicability of a particular procurement policy and practice, lack of management incentives, and difficulty in measuring energy and cost savings. To address the first impediment, the Department of Energy (DOE) developed a manual on shared energy savings contracting. The second impediment was addressed when the 100th Congress authorized incentives for federal agencies to enter into shared savings contracts. DOE addressed the third impediment by developing a methodology for calculating energy consumption and cost savings. However, because of differing methodological preferences, this issue will need to be addressed on a contract-by-contract basis. Some state governments and private sector firms are using performance contracts to reduce energy costs in their buildings and facilities. We were able to identify six states that were using performance contracts. Five have established programs, and all six states have projects under contract. The seven energy service companies we contacted indicated interest in federal shared energy savings contracting

  10. On Some Aspects of Energy Conservation in Industries

    Science.gov (United States)

    Rai, Keerti; Seksena, S. B. L.; Thakur, A. N.

    2016-06-01

    Energy demand has increased continuously due to advancement in technology and living standards of a large section of people resulting in a wide gap between supply and demand. One of the approaches to reduce this gap would be the adoption of measures of energy conservation in general and the efficient use of energy particularly in motor. This paper presents a review of the research activity in the field of efficiency optimization of three-phase induction motor drive. The approach is analyzed and the better option of energy conservation are identified.

  11. An introduction to programming with specifications

    CERN Document Server

    1991-01-01

    A feature of modern advanced computing is the functional approach to programming. In this book, the authors present an introduction to the mathematics which underline functional programming, emphasizing the understanding of definition and specification--a prerequisite of good programming and problem solving with a computer. The book is self-contained, requiring a low level of mathematical sophistication and may be used as an introduction to the mathematics of programming.Provides an introduction to the functional approach to programming**Emphasizes the problem to be solved, not the pro

  12. Augustine Band of Cahuilla Indians Energy Conservation and Options Analysis - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Paul Turner

    2008-07-11

    The Augustine Band of Cahuilla Indians was awarded a grant through the Department of Energy First Steps program in June of 2006. The primary purpose of the grant was to enable the Tribe to develop energy conservation policies and a strategy for alternative energy resource development. All of the work contemplated by the grant agreement has been completed and the Tribe has begun implementing the resource development strategy through the construction of a 1.0 MW grid-connected photovoltaic system designed to offset a portion of the energy demand generated by current and projected land uses on the Tribe’s Reservation. Implementation of proposed energy conservation policies will proceed more deliberately as the Tribe acquires economic development experience sufficient to evaluate more systematically the interrelationships between conservation and its economic development goals.

  13. Increasing the energy conservation awareness using the influential power of a lottery system

    Science.gov (United States)

    Nayak, Amruta Vijay

    This thesis presents an influence maximization-driven approach to promoting energy conservation awareness, with the objective to generate a competitive environment for energy consumption supervision. As consumers are typically reluctant to invest their time and effort in the activities beyond their business, an incentive-based distribution strategy is proposed to encourage consumers to actively take part in energy conservation. The key idea of the thesis lies in leveraging the consumer instincts as a driving factor for spreading positive social influence, via a smart lottery program. In the proposed framework, saving energy automatically increases the consumers' chances of winning the lottery, thereby motivating them to save more, while the smart winner selection will maximize the word-of-mouth effect of the program. The thesis collects and organizes a large body of literature in support of the claim that the spread of awareness in a social network can play a key role in the emergence of energy conscious behavior. It also reports on the findings of a survey conducted to determine the present day consumer perspective toward energy conservation and the level of influence required to motivate them to conserve more energy. Finally, a mathematical model for smart lottery winner selection is presented, and insightful observations are made concerning the properties of optimal solutions to tractable, small problem instances.

  14. The role of energy conservation in the BFKL equation

    International Nuclear Information System (INIS)

    Forshaw, J.R.; Harriman, P.N.; Sutton, P.J.

    1993-01-01

    We study a modification to the BFKL equation at zero momentum transfer due to the imposition of energy conservation. The significance of our modification, which enters in the form of an ultraviolet cutoff, is illustrated directly and is discussed within the context of the gluon diffusion in k T . (Author)

  15. Energy Conservation, Understanding and Activities for Young People.

    Science.gov (United States)

    Federal Energy Administration, Washington, DC.

    This publication on energy conservation is designed as a resource material for the classroom. It is divided into three chapters concerning a definition of energy, the conservation of energy, and the uses of energy. For each subtopic within the chapters, there is background information and suggested project topics designed for secondary school…

  16. 24 CFR 968.115 - Modernization and energy conservation standards.

    Science.gov (United States)

    2010-04-01

    ... changing or installing a new utility system, conduct a life-cycle cost analysis, reflecting installation... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Modernization and energy conservation standards. 968.115 Section 968.115 Housing and Urban Development Regulations Relating to Housing...

  17. 41 CFR 101-25.112 - Energy conservation policy.

    Science.gov (United States)

    2010-07-01

    ... Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 25-GENERAL 25.1... procurement and property management documents reflect the policy set forth in paragraph (b) of this section... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Energy conservation...

  18. Energy conserving site design case study: Shenandoah, Georgia. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The case study examines the means by which energy conservation can be achieved at an aggregate community level by using proper planning and analytical techniques for a new town, Shenandoah, Georgia, located twenty-five miles southwest of Atlanta's Hartsfield International Airport. A potentially implementable energy conservation community plan is achieved by a study team examining the land use options, siting characteristics of each building type, alternate infrastructure plans, possible decentralized energy options, and central utility schemes to determine how community energy conservation can be achieved by use of pre-construction planning. The concept for the development of mixed land uses as a passively sited, energy conserving community is based on a plan (Level 1 Plan) that uses the natural site characteristics, maximizes on passive energy siting requirement, and allows flexibility for the changing needs of the developers. The Level 2 Plan is identical with Level 1 plan plus a series of decentraized systems that have been added to the residential units: the single-family detached, the apartments, and the townhouses. Level 3 Plan is similar to the Level 1 Plan except that higher density dwellings have been moved to areas adjacent to central site. The total energy savings for each plan relative to the conventional plan are indicated. (MCW)

  19. Financial Energy Conservation Projects at Independent Colleges and Universities.

    Science.gov (United States)

    Morrell, L. R.

    1981-01-01

    Factors affecting financial decisions for energy conservation projects at independent colleges and universities and methods that may be used when making a financial investment decision are examined, along with sources of funding for the projects. Projects that result in the conservation of energy resources might, in a time of extreme shortages,…

  20. Energy conservation law for randomly fluctuating electromagnetic fields

    International Nuclear Information System (INIS)

    Gbur, G.; Wolf, E.; James, D.

    1999-01-01

    An energy conservation law is derived for electromagnetic fields generated by any random, statistically stationary, source distribution. It is shown to provide insight into the phenomenon of correlation-induced spectral changes. The results are illustrated by an example. copyright 1999 The American Physical Society

  1. Calorimeter energy calibration using the energy conservation law

    Indian Academy of Sciences (India)

    A new calorimeter energy calibration method was developed for the proposed ILC detectors. The method uses the center-of-mass energy of the accelerator as the reference. It has been shown that using the energy conservation law it is possible to make ECAL and HCAL cross calibration to reach a good energy resolution ...

  2. A Better 2-D Mechanical Energy Conservation Experiment

    Science.gov (United States)

    Paesler, Michael

    2012-01-01

    A variety of simple classical mechanics energy conservation experiments are used in teaching laboratories. Typical one-dimensional (1-D) setups may involve falling balls or oscillating springs. Many of these can be quite satisfying in that students can confirm--within a few percent--that mechanical energy is conserved. Students generally have…

  3. Administrative memo relative to the delivery of energy conservation certificates

    International Nuclear Information System (INIS)

    2006-07-01

    This memo details the principles of the energy conservation certificates, the law texts of application, the part of the Government and the ADEME services, the certificates demand procedure, and the inscription of the certificates on the national registries. (A.L.B.)

  4. Energy conservation achievements by New Shorrock Mills, Ahmedabad

    International Nuclear Information System (INIS)

    Rawal, N.L.; Trivedi, R.M.

    1994-01-01

    The New Shorrock Mills, Ahmedabad is a textile mill manufacturing cloth. Managerial practices like energy auditing and energy conservation monitoring introduced to conserve energy are described. Various measures implemented to conserve energy in machines power; carding, winding, warping and sizing operations; auto looms and lighting power are described. Cost reduction in terms of rupees is given. (N.B.)

  5. Energy Conservation. The Best of ERIC, Number 19.

    Science.gov (United States)

    ERIC Clearinghouse on Educational Management, Eugene, OR.

    The 13 articles in this annotated bibliography cover a wide range of concerns from the finances of energy conservation to solar energy applications, to building design, to building maintenance, and to the role of the science teacher as an energy analyst and activist. (IRT)

  6. On energy conservation and energy research. Om energioekonomisering og energiforskning

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    This report to the Storting (Parliament) is the third one on energy conservation during the last 10 years. As earlier, the report mainly treats the use of energy for stationary objects. The background for this report is, above all, the increased environmental requirements to the energy policy attached to the use of fossil fuels. The economic energy conservation potential of Norway is estimated on the basis of the present energy prices and available technology. For stationary energy use it amounts to ca 23 TWh, of which 16 TWh refer to electric power and 7 TWh to oil. Among the measures of the authorities to realize this potential, information about energy economy and energy technology is one of the most important. Other important measures are research and development activities as well as temporary arrangements for economic support. Energy conservation efforts, and efforts for a better environment should often be considered together, because higher energy efficiency in general can result in important positive environmental impacts. In the long term, the global enviromental problems may be the strongest motive power for an increased effort in energy conservation. 38 figs., 22 tabs.

  7. Reaching people with energy conservation information: four statewide residential case studies

    Energy Technology Data Exchange (ETDEWEB)

    Peelle, E.; Braid, R.B.; Jones, D.W.; Reed, J.H.

    1983-09-01

    Four state residential energy conservation programs are reviewed in terms of their origins, evolutions, purposes and goals, administration, organization, and outcomes. The four programs chosen were selected from among 30 nominated by state energy offices and regional Department of Energy personnel as being illustrative in terms of organization and/or outcomes. While intended primarily for state-level program managers and staff, the profiles of programs, conclusions, and recommendations should be useful to anyone interested in developing viable, action-oriented conservation programs. The four case studies included Oregon's Master Conserver program, Oklahoma's energy education project for low-income and elderly families, Virginia's workshops for heating dealers service and contractors, and Maine's three energy education projects - the Energy Bus, Energy Conservation Month, and the Home Energy Check-up. All four programs utilized Energy Extension Service (EES) funds from the federal government, and three were directly managed through the state EES organization. The findings of the study indicate that these programs (1) had flexibility to experiment, iterate, and reorganize as a result of their initial experiences, (2) made extensive use of networking to involve local groups in program delivery, (3) employed a large variety of delivery methods, and (4) made substantial efforts to tailor literature and handouts to the target audiences.

  8. Technical specification optimization program - engineered safety features

    International Nuclear Information System (INIS)

    Andre, G.R.; Jansen, R.L.

    1986-01-01

    The Westinghouse Technical Specification Program (TOP) was designed to evaluate on a quantitative basis revisions to Nuclear Power Plant Technical Specifications. The revisions are directed at simplifying plant operation, and reducing unnecessary transients, shutdowns, and manpower requirements. In conjunction with the Westinghouse Owners Group, Westinghouse initiated a program to develop a methodology to justify Technical Specification revisions; particularly revisions related to testing and maintenance requirements on plant operation for instrumentation systems. The methodology was originally developed and applied to the reactor trip features of the reactor protection system (RPS). The current study further refined the methodology and applied it to the engineered safety features of the RPS

  9. Lessons for integrated household energy conservation policies from an intervention study in Singapore

    International Nuclear Information System (INIS)

    Kua, H.W.; Wong, S.E.

    2012-01-01

    In preparation for a community energy conservation program in the southwest district of Singapore, a pilot intervention study was conducted between August and November 2008 to study the effectiveness of tailored information and feedback in promoting household conservation. A sample of 125 households was involved in the study, of which 63 were the control group. Both self-reported behavioral changes and actual energy reductions were measured and any Hawthorne effect was identified. It was found that self-reported behavioral changes were strongly correlated to the level of trust in the energy conservation information given, the need for ease in practicing the recommended conservation measures and feeling of satisfaction in executing the measures; these results differ from several past studies on energy interventions. 60.7% of those who reported behavioral changes actually reduced energy consumption. Reasons were found and discussed. Lessons from this intervention study can be applied to design integrated policies aimed at promoting energy conservation in households. - Highlights: ► Energy intervention was implemented on 125 households. ► Outreach instruments included stickers, pamphlets and counseling. ► Self-reported behavioral and actual reductions were recorded. ► Self-reported behavioral change was only correlated to trust of information given. ► It was also correlated to ease of actions and feeling of satisfaction from actions.

  10. Energy performance contracting - energy saving potential of selected energy conservation measures (ECM)

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, M. (Dansk Energi Analyse A/S, Frederiksberg (Denmark)); Langkilde, G.; Olesen, Bjarne W. (Technical Univ. of Denmark, ICIEE, Kgs. Lyngby (Denmark)); Moerck, O. (Cenergia Energy Consultants, Herlev (Denmark)); Sundman, O. (DONG Energy, Copenhagen (Denmark)); Engelund Thomsen, K. (Aalborg Univ., SBi, Hoersholm (Denmark))

    2008-09-15

    This report has been developed under the research project 'Etablering af grundlag for energitjenester i Danmark' (project number: ENS-33031-0185) under the Danish research programme - EFP. The objective of this project has been to contribute to the utilisation of the large potential for energy conservations in the building sector within the public, industry and service sectors through the development of a better basis for decision making for both the Energy Service Companies (ESCOes) and the building owners. The EU directive on Energy Service Contracting points at the buildings as the area where the biggest potential market for energy services and energy efficiency improvements are. The EFP-project has two parts: (1) A Danish part and (2) participation in the international cooperation project 'Holistic Assesment Tool-Kit on Energy Efficient Retrofit Measures for Government Buildings (EnERGo)', Annex 46 under the IEA R and D program 'Energy Conservation In Buildings And Community Systems' (ECBCS). This report describes the Danish contributions to the IEA projects subtask B, which has a primary objective to develop a database of energy conservation measures (ECM) with descriptions and performance characteristics of these. (au)

  11. Energy performance contracting - energy saving potential of selected energy conservation measures (ECM)

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, M [Dansk Energi Analyse A/S, Frederiksberg (Denmark); Langkilde, G; Olesen, Bjarne W [Technical Univ. of Denmark, ICIEE, Kgs. Lyngby (Denmark); Moerck, O [Cenergia Energy Consultants, Herlev (Denmark); Sundman, O [DONG Energy, Copenhagen (Denmark); Engelund Thomsen, K [Aalborg Univ., SBi, Hoersholm (Denmark)

    2008-09-15

    This report has been developed under the research project 'Etablering af grundlag for energitjenester i Danmark' (project number: ENS-33031-0185) under the Danish research programme - EFP. The objective of this project has been to contribute to the utilisation of the large potential for energy conservations in the building sector within the public, industry and service sectors through the development of a better basis for decision making for both the Energy Service Companies (ESCOes) and the building owners. The EU directive on Energy Service Contracting points at the buildings as the area where the biggest potential market for energy services and energy efficiency improvements are. The EFP-project has two parts: (1) A Danish part and (2) participation in the international cooperation project 'Holistic Assesment Tool-Kit on Energy Efficient Retrofit Measures for Government Buildings (EnERGo)', Annex 46 under the IEA R and D program 'Energy Conservation In Buildings And Community Systems' (ECBCS). This report describes the Danish contributions to the IEA projects subtask B, which has a primary objective to develop a database of energy conservation measures (ECM) with descriptions and performance characteristics of these. (au)

  12. Final report on the comprehensive approach to energy conservation for the Aboriginal community in Ontario

    Energy Technology Data Exchange (ETDEWEB)

    Fox, C.D. [Fort William First Nation, Thunder Bay, ON (Canada)

    2006-03-13

    This report presented a comprehensive approach to energy conservation programming for the Fort William First Nation, located in Thunder Bay, Ontario. The report outlined the historical context of the relationship between the Canadian government and Aboriginal people. The Aboriginal community in Ontario was described with reference to the difference between First Nations population, Metis, and Inuit. Statistics on the Aboriginal population in Ontario was broken down. Different Aboriginal organizations as well as organizations serving Aboriginal peoples were identified and described. The report also described the political process and administrative protocol for energy conservation and energy efficiency. Energy conservation in the Aboriginal community was also explained. Last, the report provided several recommendations related to awareness and education; translation; incentives; delivery mechanisms; and pilot projects. The report concluded with an agreement to hold a provincial conference in Toronto on the issues raised in the report. The report concluded that an Aboriginal unit within the Bureau of Conservation of the Ontario Power Authority was envisioned to plan, develop, implement, manage and monitor the deliverables resulting from the report.

  13. Models for residential- and commercial-sector energy-conservation analysis: applications, limitations, and future potential. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Cole, Henry E.; Fullen, Robert E.

    1980-09-01

    This report reviews four of the major models used by the Department of Energy (DOE) for energy conservation analyses in the residential- and commercial-building sectors. The objective is to provide a critical analysis of how these models can serve as tools for DOE and its Conservation Policy Office in evaluating and quantifying their policy and program requirements. For this, the study brings together information on the models' analytical structure and their strengths and limitations in policy applications these are then employed to assess the most-effective role for each model in addressing future issues of buildings energy-conservation policy and analysis. The four models covered are: Oak Ridge Residential Energy Model; Micro Analysis of Transfers to Households/Comprehensive Human Resources Data System (MATH/CHRDS) Model; Oak Ridge Commercial Energy Model; and Brookhaven Buildings Energy Conservation Optimization Model (BECOM).

  14. Corporate Energy Conservation Program for Alcoa North American Extrusions

    Energy Technology Data Exchange (ETDEWEB)

    None

    2001-08-01

    This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

  15. Consumer energy-conservation policy in Canada: behavioural and institutional obstacles

    Energy Technology Data Exchange (ETDEWEB)

    McDougall, G.H.G. (Wilfrid Laurier Univ., Waterloo, Ontario); Mank, R.B.

    1982-09-01

    This paper posits that if consumer energy-conservation policy is to succeed in Canada, both behavioral and institutional obstacles must be identified and overcome. The behavioral barriers, identified through a national household survey, include consumer resistance to policies that affect their lifestyles. The institutional barriers obtained from a series of interviews with government officials, include weak federal-provincial relations. Viewed from a federal perspective, these obstacles are discussed and then linked to policy types. A prior understanding of the obstacles that a particular program type is likely to face should allow more-effective execution of the program and enhance the probability of success. 11 references, 7 tables.

  16. Sewerage force adjustment technology for energy conservation in vacuum sanitation systems

    Science.gov (United States)

    Guo, Zhonghua; Li, Xiaoning; Kagawa, Toshiharu

    2013-03-01

    The vacuum sanitation is the safe and sound disposal approach of human excreta under the specific environments like flights, high speed trains and submarines. However, the propulsive force of current systems is not adjustable and the energy consumption does not adapt to the real time sewerage requirement. Therefore, it is important to study the sewerage force adjustment to improve the energy efficiency. This paper proposes an energy conservation design in vacuum sanitation systems with pneumatic ejector circuits. The sewerage force is controlled by changing the systematic vacuum degree according to the amount of the excreta. In particular, the amount of the excreta is tested by liquid level sensor and mass sensor. According to the amount of the excreta, the relationship between the excreta amount and the sewerage force is studied to provide proper propulsive force. In the other aspect, to provide variable vacuum degrees for different sanitation requirements, the suction and discharge system is designed with pneumatic vacuum ejector. On the basis of the static flow-rate characteristics and the vacuum generation model, the pressure response in the ejector circuit is studied by using the static flow rate characteristics of the ejector and air status equation. The relationship is obtained between supplied compressed air and systematic vacuum degree. When the compressed air is supplied to the ejector continuously, the systematic vacuum degree increases until the vacuum degree reaches the extreme value. Therefore, the variable systematic vacuum degree is obtained by controlling the compressed air supply of the ejector. To verify the effect of energy conservation, experiments are carried out in the artificial excreta collection, and the variable vacuum-degree design saves more than 30% of the energy supply. The energy conservation is realized effectively in the new vacuum sanitation systems with good application prospect. The proposed technology provides technological

  17. Going Green Doesn't Have to Be Sexy: Lakeland Community College's Practical Approach to Addressing Energy Conservation and Sustainability

    Science.gov (United States)

    Mayher, Michael E.

    2010-01-01

    Lakeland Community College is recognized for its energy conservation leadership in Ohio and nationally. The college's program will detail the practical, incremental approach taken in Lakeland's "Energy Journey." Setting the standard statewide, that journey recently resulted in a sustainable, guaranteed reduction of energy use by 40%.

  18. A new mechanism for energy conservation technology services

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Feng

    1996-12-31

    In the ninth-five year plan of China, the socialist market economy model will be developed. In the stage of transferring from planning economy to market economy, the energy conservation technology services industry in China has met new challenges. Over the past ten to fifteen years, there has developed a new mechanism for financing energy efficiency investments in market economies. The process is simple. After inspecting an enterprise or an entity for energy saving opportunities, an Energy Service Company (ESCO) which business aimed at making money will review the recommended energy conservation opportunities with the enterprise or the entity (user) and implement those measures acceptable to the user at no front end cost to the user. The ESCO then guarantees that the energy savings will cover the cost of the capital renovations using the Performance Contracting.

  19. Energy conservation investments: A comparison between China and the US

    International Nuclear Information System (INIS)

    Lin, Jiang

    2007-01-01

    Growth in energy consumption in China has soared from 2001 to 2004, driven largely by a booming economy and heavy investment in infrastructure and housing. In response, China has poured billions of dollars of investment in building power plants-at a rate of one large power plant (1000 MW) per week. In fact, China in 2004 has added the entire generating capacity of California or Spain in a single year. In contrast, investment in energy conservation projects has weakened considerably in recent years. This paper examines trends in energy efficiency investments in China and the US. The comparison highlights the potential of energy conservation investments in addressing China's current energy crisis as well as the inadequacy of such investments in China. Finally, the paper outlines a few scenarios for appropriate levels of investments in energy efficiency in China in the future

  20. Energy conservation normatives in Italy: Thermotechnical Committee organizational efforts

    Energy Technology Data Exchange (ETDEWEB)

    Casagrande, A [Comitato Termotecnico Italiano, Milan (Italy)

    1991-10-01

    A recent Italian law (No. 10/91) calls for energy conservation to be implemented in building materials and HVAC systems through the creation of a suitable set of normatives. The CTI (Italian Thermotechnical Committee) has been assigned the task of creating these normatives and is currently in the organizational stage. This paper lists the proposed normatives and reports on CTI's progress in assembling groups of consultants from various sectors - public administration, end users, industrial firms, etc.

  1. The Energy Conservation Guide 98/99; ENOEK guiden 99

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    Norwegians have the world's largest electricity consumption per capita. This booklet aims to advice house owners on efficient use of energy. The main sections discuss the concept of energy conservation in general, heating, stoves and fireplaces, central heating, insulation and sealing, windows, hot water, water saving, lighting, domestic appliances, ventilation, outdoor facilities, and finally gives some tips on investments and profitability and how to obtain expert advice. The booklet is profusely illustrated.

  2. Energy conservation and efficiency in manufacturing: Employee decisions and actions

    Science.gov (United States)

    Corson, Marla D.

    Energy conservation and intensity reduction efforts are becoming increasingly more prevalent and ultimately necessary, especially for energy-intensive manufacturing companies in particular to stay in business. Typical actions are to change technology, and thus, realize an energy cost savings in overall utilities. However, in today's competitive market, with climate change and other environmental impacts as well, it is necessary for the cost of energy to be valued as a cost of making a product, and thus, managed at the same level as the cost of labor or materials. This research assessed human behavior at the individual and organizational levels both at work and at home that either prompted or prohibited employees from taking daily action to conserve energy or develop greater energy efficient practices. Ultimately, the questions began with questions regarding employee views and knowledge of energy at work and at home and what drives both behaviors toward conservation or efficiency. And, the contribution identifies the key drivers, barriers, and/or incentives that affect those behaviors. The results of this study show that the key driver and motivator for energy conservation both at home and work is cost savings. The study showed that to further motivate individuals to conserve energy at home and work, more knowledge of the impact their actions have or could have as well as tools would be needed. The most poinient aspect of the research was the level of importance placed on energy conservation and the desire to conserve. The feedback given to the open ended questions was quite impressive regarding what employees have done and continue to do particularly within their homes to conserve energy. These findings brought about final recommendations that were in fact not expected but could significantly influence an increase in energy conservation at work by leveraging the existing desire to conserve which is a key component to decision making.

  3. Application of economic principles in energy conservation measures

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharyya, A

    1976-01-01

    The point of departure for the selection of any energy-conserving policy is the availability of (at least) two practical options or alternatives for policy maker at enterprise level. In real life, in the same point of time, or in the same geographical location, there could be several energy conservation options for the same industrial process. One need only set up a pairwise comparison of two options at a time and answer the question: which option is the most desirable from the energy conservation standpoint. Which option is the most desirable from the purchaser's point of view. If one takes both these factors into account, which option is socially the most desirable. We have explained two economic techniques (Life Cycle Cost (LCC), Market Acceptance) and their integration to compare two systems at a time. To begin with, a policy maker at enterprise level can carry out LCC. As technology progresses over time, Market Acceptance estimation may be warranted. Finally, Cost-Benefit Analysis may be applied to overall evaluation of competing projects which have involvement of large social groups, and wider foreign exchange implications.

  4. Energy R and D programme: energy conservation research. Survey of results (1975-1979) and compilation of selected new projects (1979-1983)

    Energy Technology Data Exchange (ETDEWEB)

    Zegers, P [ed.

    1981-01-01

    Results obtained in the European Communities Energy Conservation Research and Development (R and D) Program are presented. Energy Conservation R and D was executed in the following subsectors: improved insulation of buildings; use of heat pumps; urban transport; residual heat recovery; materials recycling; production of energy from waste; industrial processes; and storage of secondary energy. Summaries are presented for information gained from the research projects. Then, separate abstracts for all final reports (96), contract numbers, and the authors are given. (MCW)

  5. Report on energy conservation. Potential feasibility study on energy conservation at the national textile factories (Energy-saving equipment)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In consideration of the future CDM project, feasibility study was made on the energy conservation/cost reduction in national textile factories in Egypt. In textile factories in Egypt, the steam by oil fueled boiler is used in dyeing, drying and other production processes. In this study, studied were the energy conservation effect, greenhouse effect gas reduction effect and economical efficiency in the case of using electric power/steam by the natural gas fueled cogeneration system. As a result of the study, the energy conservation effect in 6 national textile factories became 13% on average, which equals to the conservation of 15,000 toe per year. The greenhouse effect gas reduction effect also became 13%, which equals to the reduction of approximately 46,000 t-CO2 per year. As to the economical efficiency, the depreciation period of investment became 4.0-8.6 years (5.6 years on average). In the light of the operation period of cogeneration facilities of 15 years, it was indicated that the system was very advantageous. (NEDO)

  6. ASEAN-USAID buildings energy conservation project. Volume 1, Energy standards: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Levine, M.D.; Busch, J.F. [eds.][Lawrence Berkeley Lab., CA (United States); Deringer, J.J. [Deringer Group, Riva, MD (United States)

    1992-06-01

    Mandatory or voluntary energy-efficiency standards for new or existing buildings can play an important role in a national program aimed at promoting energy conservation. Building codes and standards can provide a degree of control over design and building practices throughout the construction process, and encourage awareness of energy-conscious design. Studies in developed countries indicate that efficiency standards can produce energy reductions on the order of 20 to 40% or more. Within ASEAN, analyses of the savings potential from the proposed standards suggest that if implemented, these standards would produce savings over current new design practice of 19% to 24%. In this volume we provide an overview of the ASEAN-USAID project aimed at promulgating standards for energy efficiency in commercial buildings. The process of developing and implementing energy-efficiency standards for buildings can be subdivided into two key components: policy development; and technical and economic analysis. Each of these involves a number of steps and processes, as outlined in Figure 1-1. This volume describes the technical and economic analyses used to develop the proposed energy efficiency standards for four countries (Malaysia, Thailand, the Philippines, and Indonesia), and to refine an energy standard existing in Singapore since 1979. Though oriented toward the ASEAN region, the analysis methods described here are applicable in a range of settings, provided appropriate modifications are made for local building construction, climatic, economic, and political conditions. Implementation issues are not specifically addressed here; rather this volume is oriented towards the analytical work needed to establish or revise an energy standard for buildings.

  7. Energy conservation and dust production in wet rotary cement kilns

    Energy Technology Data Exchange (ETDEWEB)

    Sell, N J; Fischbach, F A

    1976-12-01

    Energy conservation is currently a major concern of the cement industry. A comparison of data supplied by the U.S. Federal Energy Administration with that gathered in an extensive private study incorporating 29 wet cement plants indicates that a significant reduction of the energy consumed can be accomplished by decreasing the amount of dust generated in the process. Energy saving of 8 percent through dust suppression appears possible by increasing the slurry moisture and by using hammermills rather than impactors as the crushing technique.

  8. Energy conservation and fuel substitution in Ube Kosan

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    After describing various changes in the Ube Kosan of Japan, an account is given of the history of the energy changeover and conservation being promoted by this company, together with details of the results of these measures and the company structures involved. Topics mentioned include imports of coal, the changeover to coal as a heat source in the production of cement and for the company's private power generation, the establishment of a coal centre, the organization of the drive towards energy conservation, the adoption of the SAVE technique, feedstock substitution, and the state of development of new processes.

  9. Correlation-induced spectral changes and energy conservation

    International Nuclear Information System (INIS)

    Agarwal, G.S.; Wolf, E.

    1996-01-01

    An energy conservation law is derived for fields generated by random, statistically stationary, scalar sources of any state of coherence. It is shown that correlation-induced spectral changes are in strict agreement with this law and that, basic to the understanding of such changes, is a distinction that must be made between the spectrum of a source and the spectrum of the field that the source generates. This distinction, which is obviously relevant for spectroscopy, does not appear to have been previously recognized. copyright 1996 The American Physical Society

  10. Exactly energy conserving semi-implicit particle in cell formulation

    International Nuclear Information System (INIS)

    Lapenta, Giovanni

    2017-01-01

    We report a new particle in cell (PIC) method based on the semi-implicit approach. The novelty of the new method is that unlike any of its semi-implicit predecessors at the same time it retains the explicit computational cycle and conserves energy exactly. Recent research has presented fully implicit methods where energy conservation is obtained as part of a non-linear iteration procedure. The new method (referred to as Energy Conserving Semi-Implicit Method, ECSIM), instead, does not require any non-linear iteration and its computational cycle is similar to that of explicit PIC. The properties of the new method are: i) it conserves energy exactly to round-off for any time step or grid spacing; ii) it is unconditionally stable in time, freeing the user from the need to resolve the electron plasma frequency and allowing the user to select any desired time step; iii) it eliminates the constraint of the finite grid instability, allowing the user to select any desired resolution without being forced to resolve the Debye length; iv) the particle mover has a computational complexity identical to that of the explicit PIC, only the field solver has an increased computational cost. The new ECSIM is tested in a number of benchmarks where accuracy and computational performance are tested. - Highlights: • We present a new fully energy conserving semi-implicit particle in cell (PIC) method based on the implicit moment method (IMM). The new method is called Energy Conserving Implicit Moment Method (ECIMM). • The novelty of the new method is that unlike any of its predecessors at the same time it retains the explicit computational cycle and conserves energy exactly. • The new method is unconditionally stable in time, freeing the user from the need to resolve the electron plasma frequency. • The new method eliminates the constraint of the finite grid instability, allowing the user to select any desired resolution without being forced to resolve the Debye length. • These

  11. Exactly energy conserving semi-implicit particle in cell formulation

    Energy Technology Data Exchange (ETDEWEB)

    Lapenta, Giovanni, E-mail: giovanni.lapenta@kuleuven.be

    2017-04-01

    We report a new particle in cell (PIC) method based on the semi-implicit approach. The novelty of the new method is that unlike any of its semi-implicit predecessors at the same time it retains the explicit computational cycle and conserves energy exactly. Recent research has presented fully implicit methods where energy conservation is obtained as part of a non-linear iteration procedure. The new method (referred to as Energy Conserving Semi-Implicit Method, ECSIM), instead, does not require any non-linear iteration and its computational cycle is similar to that of explicit PIC. The properties of the new method are: i) it conserves energy exactly to round-off for any time step or grid spacing; ii) it is unconditionally stable in time, freeing the user from the need to resolve the electron plasma frequency and allowing the user to select any desired time step; iii) it eliminates the constraint of the finite grid instability, allowing the user to select any desired resolution without being forced to resolve the Debye length; iv) the particle mover has a computational complexity identical to that of the explicit PIC, only the field solver has an increased computational cost. The new ECSIM is tested in a number of benchmarks where accuracy and computational performance are tested. - Highlights: • We present a new fully energy conserving semi-implicit particle in cell (PIC) method based on the implicit moment method (IMM). The new method is called Energy Conserving Implicit Moment Method (ECIMM). • The novelty of the new method is that unlike any of its predecessors at the same time it retains the explicit computational cycle and conserves energy exactly. • The new method is unconditionally stable in time, freeing the user from the need to resolve the electron plasma frequency. • The new method eliminates the constraint of the finite grid instability, allowing the user to select any desired resolution without being forced to resolve the Debye length. • These

  12. Residential energy-efficient technology adoption, energy conservation, knowledge, and attitudes: An analysis of European countries

    International Nuclear Information System (INIS)

    Mills, Bradford; Schleich, Joachim

    2012-01-01

    Relationships between measures of household energy use behavior and household characteristics are estimated using a unique dataset of approximately 5000 households in 10 EU countries and Norway. Family age-composition patterns are found to have a distinct impact on household energy use behavior. Households with young children are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy savings for environmental reasons. By contrast, households with a high share of elderly members place more importance on financial savings, and have lower levels of technology adoption, energy conservation practice use, and knowledge about household energy use. Education levels also matter, with higher levels associated with energy-efficient technology adoption and energy conservation practice use. Similarly, university education increases the stated importance of energy savings for greenhouse gas reductions and decreases the stated importance for financial reasons. Education impacts also vary greatly across survey countries and there is some evidence of an Eastern–Western European divide with respect to attitudes towards energy savings. These cross-country differences highlight the need to balance a common EU energy-efficiency policy framework with flexibility for country specific policies to address unique constraints to energy-efficient technology and conservation practice adoption. - Highlights: ► Household energy use behavior is explored with data from 11 European countries. ► Household age structure and education influence household energy use behavior and attitudes. ► Significant country differences in household energy use behavior exist. ► The EU needs to balance a common energy-efficiency policy framework with country specific policies.

  13. Survey of energy conservation in India: priorities and policy dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Pachauri, R K

    1983-01-01

    The formulating and implementing of an energy conservation policy in India was delayed, because emphasis was placed upon an increase of energy production in the mistaken belief that this is tantamount to an improvement in the standard of life. Statistical data of energy production according to its source and of its consumption by individual sectors of the national economy are presented. They show that by far the largest turnover is in energy derived from firewood and vegetable and animal waste for domestic use in rural India. Although a very great potential for energy conservation exists in this domain, its implementation on a large scale is hardly practicable because it would affect many millions of village households with very different life styles dictated by varying natural conditions in individual areas of the country. Energy derived from oil and coal is used rather wastefully mainly because of obsolete equipment and technology. There is a vast scope for improvement in this area and appropriate measures have been initiated by the Government. The demand for oil derivatives for transportation is increasing dangerously, mainly because of dieselization of the national railways and of development of motorized road transport. A turnaround of this trend would require, however, a restructuring of the Indian transportation system.

  14. Feasibility study of energy conservation at Vietnam Steel Corporation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Feasibility study was conducted of the project for energy conservation and reduction in greenhouse effect gas emission by introducing the honeycomb type heat storage burner technology to heating furnaces of Vietnam Steel Corporation (VSC). Furnaces for study are the bar mill furnace at Gia Sang plant of TISCO Steelorks, bar mill furnace at Thu Duc plant of SSC Steelworks, billet furnace at new bar mill of SSC Steelworks, slab furnace at new hot strip mill that VSC is now in the planning stage. As a result of the study, the energy conservation amount is 2,900 toe/y at TISCO Steelworks, 2,130 toe/y at SSC Steelworks, and 6,000 toe/y at VSC new hot strip mill, which totaled 11,030 toe/y. The amount of greenhouse effect gas reduction is 9,000 t-CO2/y at TISCO, 6,600 t-CO2/y at SSC, and 18,600 t-CO2/y at VSC, which totaled 34,200 t/y. The total investment amount is 0.23, 0.44, 1.32 and 1.99 billion yen for each. As to the profitability, the internal earning rate is 24%, 86%, 97% and 51% for each, which are all favorable. (NEDO)

  15. Performance of passive solar and energy conserving houses in California

    Science.gov (United States)

    Mahajan, S.; Newcomb, C.; Shea, M.; Mort, D.

    1983-11-01

    This report provides a technical description of the methodology and the results of a two year effort to collect field data on the performance of passive solar and energy conserving houses in California. Sixty-three passive solar houses were visited and several hours were spent with the homeowner obtaining building details, management procedures, architectural plans, photographs, and at least a year of billing data. With this information thermal performance parameters were calculated for each of the houses. Eleven of the above sixty-three Class C sites (nine passive solar and two energy conserving houses) were instrumented and monitored using the SERI Class B methodology as a guideline. Continuous data were collected for one year using up to 18 different sensors to measure temperatures, electric power, insolation, and the status of fans, gas burners, and moveable insulation. In addition careful one time measurements were made to determine the loss coefficient, infiltration rate, and furnace efficiency. Analysis of this data giving comfort conditions maintained and energy uses for a complete heating and cooling season for each of the houses is presented.

  16. Energy conservation in developing countries using green building idea

    International Nuclear Information System (INIS)

    Rashid, Akram; Qureshi, Ijaz Mansoor

    2013-01-01

    Green buildings uses processes that are environmentally responsible and resource-efficient throughout a building's life-cycle. In these buildings Certain energy conservative and environment friendly steps are considered and implemented from design, construction, operation, maintenance and renovation. In present era no doubt new technologies are constantly constructed and used in creating greener structures, energy efficient buildings. The common objective is to reduce the overall impact of the built environment on human health using available energy efficiently. To increase the efficiency of the System or the building, Onsite generation of renewable energy through solar power, wind power, hydro power, or biomasscan significantly reduce the environmental impact of the building. Power generation is generally the most expensive feature to add to a building. Any how power generation using renewable sources that is Solar system may further enhance energy conservation ideas. Power Factor improvement can also be another source of efficient tool for efficient use of Electrical Energy in green buildings. In developing countries a significant amount of Electrical Energy can be conserved and System efficiency as a whole can be increased by Power Factor correction. The reverse flow of power can be locally engaged instead of creating extra stress and opposition to the existing grid lines.

  17. Downstream-based Scheduling for Energy Conservation in Green EPONs

    KAUST Repository

    Chen, Shen

    2012-05-01

    Maximizing the optical network unit’s (ONU) sleep time is an effective approach for achieving maximum energy conservation in green Ethernet passive optical networks (EPONs). While overlapping downstream and upstream ONU transmissions can maximize the ONU sleep time, it jeopardizes the quality of service (QoS) performance of the network, especially for downstream traffic in case the overlapping is based on the upstream time slot. In this paper, we study the downstream traffic performance in green EPONs under the limited service discipline and the upstream-based overlapped time window. Specifically, we first derive the expected mean packet delay, and then present a closed-form expression of the ONU sleep time, setting identical upstream/downstream transmission cycle times based on a maximum downstream traffic delay re-quirement. With the proposed system model, we present a novel downstream bandwidth allocation scheme for energy conservation in green EPONs. Simulation results verify the proposed model and highlight the advantages of our scheme over conventional approaches.

  18. Energy conservation in pulp and paper industry: some thoughts

    Energy Technology Data Exchange (ETDEWEB)

    Sadawarte, N. S.; Prasad, A. K.; Khanolkar, V. D.; Shenoy, S. C.

    1980-03-15

    The pulp and paper industry is highly energy intensive. In view of the spiralling fuel prices and rising power costs, there is an urgent need to conserve energy through better management of various operations in the industry, from the optimal utilization of the forest residues to the shipment of the final product. The total energy concept, e.g., energy generation, distribution and utilization in Indian paper industry is discussed. The need for an energy audit is emphasized and the formats of energy reporting forms are included. Short and long term measures to be enforced to achieve energy savings in the pulp and paper mills are outlined. Some important energy conservation approaches are also discussed. Factors affecting energy efficiency in a pulp and paper mill are reviewed. Some areas where sustained R and D efforts should be focused to make the paper industry nearly self-sufficient in energy generation and utilization are also given. It is essential to have a National Energy Policy clearly defining achievable targets of energy conservation for industry. The Indian paper industry could advantageously form its own committee to review the operation of the various mills in the country and come out with concrete solutions for higher energy efficiency and more effective conservation of energy.

  19. Retrofit energy conservation in residential buildings in southern California

    Science.gov (United States)

    Turner, R. H.; Birur, G. C.; Daksla, C.

    1982-01-01

    The common energy conservation techniques (ECTs) that can be retrofit-installed into residential buildings are surveyed. The quantity of saved energy for heating and cooling attributable to each ECT is evaluated for three common modes of heating: natural gas heating at 60/therm; heating via heat pump at $1.20/therm; and electric resistance heating at $2.40/therm. In every case, a life cycle cost comparison is made between the long term revenue due to energy conservation and a safe and conventional alternative investment that might be available to the prudent homeowner. The comparison between investment in an ECT and the alternative investment is brought into perspective using the life cycle payback period and an economic Figure of Merit (FOM). The FOM allows for relative ranking between candidate ECTs. Because the entire spectrum of winter heating climates in California is surveyed, the decision maker can determine whether or not a considered ECT is recommended in a given climate, and under what conditions an ECT investment becomes attractive.

  20. Marketing energy conservation options to Northwest manufactured home buyers

    Energy Technology Data Exchange (ETDEWEB)

    Hendrickson, P.L.; Mohler, B.L.; Taylor, Z.T.; Lee, A.D.; Onisko, S.A.

    1985-06-01

    This study relies on extensive, existing survey data and new analyses to develop information that would help design a marketing plan to achieve energy conservation in new manufactured homes. Existing surveys present comprehensive information about regional manufactured home occupants and their homes that are relevant to a potential conservation marketing plan. An independent analysis of the cost-effectiveness of various efficiency improvements provides background information for designing a marketing plan. This analysis focuses on the economic impacts of alternative energy conservation options as perceived by the home owner. Identifying impediments to conservation investments is also very important in designing a marketing plan. A recent report suggests that financial constraints and the need for better information and knowledge about conservation pose the major conservation investment barriers. Since loan interest rates for new manufactured homes typically exceed site-built rates by a considerable amount and the buyers tend to have lower incomes, the economics of manufactured home conservation investments are likely to significantly influence their viability. Conservation information and its presentation directly influences the manufactured home buyer's decision. A marketing plan should address these impediments and their implications very clearly. Dealers express a belief that consumer satisfaction is the major advantage to selling energy efficient manufactured homes. This suggests that targeting dealers in a marketing plan and providing them direct information on consumers' indicated attitudes may be important. 74 refs.

  1. The programming language HAL: A specification

    Science.gov (United States)

    1971-01-01

    HAL accomplishes three significant objectives: (1) increased readability, through the use of a natural two-dimensional mathematical format; (2) increased reliability, by providing for selective recognition of common data and subroutines, and by incorporating specific data-protect features; (3) real-time control facility, by including a comprehensive set of real-time control commands and signal conditions. Although HAL is designed primarily for programming on-board computers, it is general enough to meet nearly all the needs in the production, verification and support of aerospace, and other real-time applications.

  2. Energy conservation from a consumer perspective. Institut fuer marketing der Universitaet Muenster, Arbeitspapiere

    Energy Technology Data Exchange (ETDEWEB)

    Katz, R

    1980-01-01

    A survey of the standard of energy research in the American Literature on consumer behaviour is given. After the discussion of the importance of consumer research for energy conservation the difficulties on determining ''energy conservation behaviour'' are described. Moreover, the study compiles past American Literature that has tried to explain energy conservation behaviour. A further chapter analyzes measures of influencing the consumer energy conservation behaviour carried out so far in the United States and Canada. Finally, still open problems in future American energy conservation research in the field of consumer behaviour are demonstrated.

  3. Final report on implementation of energy conservation practices training in selected public housing developments

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This report on the implementation of energy conservation practices training in selected public housing developments represents an initiative of the Research and Education Division, Office of Minority Economic Impact, US Department of Energy. The Office of Minority Economic Impact (MI) was created by Congress in 1979, within the US Department of Energy, to afford the Secretary advice on the effect policies, regulations and other actions of DOE respecting minority participation in energy programs. The Director of MI is responsible for the conduct of ongoing research into the effects, including socio-economic and environmental, of national energy programs, policies, and regulations of the Department of minorities. Public housing in the United States is dominated by minorities, public housing is a large consumer of residential energy. Consequently, this project is a logical merging of these two factors and an attempt to somehow influence energy savings through improving public housing residents` energy-consumption practices. This final report attempts to capture the results of this current demonstration, and incorporate the historical basis for today`s results by renewing the efforts that preceded the implementation of energy conservation practices training in selected public housing developments.

  4. Final report on implementation of energy conservation practices training in selected public housing developments

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This report on the implementation of energy conservation practices training in selected public housing developments represents an initiative of the Research and Education Division, Office of Minority Economic Impact, US Department of Energy. The Office of Minority Economic Impact (MI) was created by Congress in 1979, within the US Department of Energy, to afford the Secretary advice on the effect policies, regulations and other actions of DOE respecting minority participation in energy programs. The Director of MI is responsible for the conduct of ongoing research into the effects, including socio-economic and environmental, of national energy programs, policies, and regulations of the Department of minorities. Public housing in the United States is dominated by minorities, public housing is a large consumer of residential energy. Consequently, this project is a logical merging of these two factors and an attempt to somehow influence energy savings through improving public housing residents' energy-consumption practices. This final report attempts to capture the results of this current demonstration, and incorporate the historical basis for today's results by renewing the efforts that preceded the implementation of energy conservation practices training in selected public housing developments.

  5. Energy conservation: policy issues and end-use scenarios of savings potential. Part IV. Energy-efficient recreational travel

    Energy Technology Data Exchange (ETDEWEB)

    Benson, P.; Codina, R.; Cornwall, B.

    1978-09-01

    The guidelines laid out for the five subjects investigated in this series are to take a holistic view of energy conservation policies by describing the overall system in which they are implemented; provide analytical tools and sufficiently disaggregated data bases that can be adapted to answer a variety of questions by the users; identify and discuss some of the important issues behind successful energy conservation policy; and develop an energy conservation policy in depth. This report contains the design of a specific policy that addresses energy conservation in recreational travel. The policy is denoted as an ''Information System for the National Park Service.'' This work is based on prior examination of the characteristics of the recreational trip and decision making for the recreational experience. The examination revealed which aspects of the recreational travel system needed to be addressed to encourage energy-efficient modal decisions for recreational travel. This policy is briefly described in Section 1, the ''Summary of Initiative.'' A more detailed discussion of the policy follows. The material which led to the policy's formation is developed in Section 2: Importance and Impact of the Recreational Trip; Weekend Travel; The Flowchart: Decision Making for the Recreational Experience; Policy Development for Phase 1 ''Planning the Trip;'' and Objectives and Strategies for ''Planning the Trip.'' (MCW)

  6. A True Proteus: A history of energy conservation in German science and culture, 1847-1914

    Science.gov (United States)

    Wegener, F. D. A.

    2009-11-01

    the law could be invoked as an argument against vitalism. In popular scientific lectures they emphasized the law’s connection to Germany’s industrialization and its ethical value. Thus they partly shaped the reception of the law. But of course, its reception could not be completely controlled. People have interests of their own and they often appropriated the law in unexpected ways. This thesis’ stress on meaning as use, and its use of concepts like interests and appropriation may make it appear as if energy was whatever people wanted it to be. This is a misunderstanding. Obviously, within a specific community, there were limits to what one could reasonably make of energy. But these were social as much as intellectual constraints. More importantly, by the turn of the century, the law of energy conservation had acquired a certain ubiquity in German science and culture. The continuous talk about energy had a persuasive power of its own. Centerum censeo, Du Bois-Reymond said. Ultimately, the law imposed itself on everybody, even those who tried to ignore it.

  7. Substantial energy conservation in air conditioners; Substantiele energiebesparing bij luchtbehandelingsinstallaties

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    An air conditioner has been retrofitted by application of an optimized fan in combination with an EC motor (brushless dc-motor). Attention is paid to the difference between an AC- and and EC motor, between free-running and spiral housing fans, between direct or indirect-driven, and between forward-bended and backward-bended blades. By means of equations and diagrams the realized energy conservation is visualized. [Dutch] De renovatie van een luchtbehandelingskast wordt besproken. Door de toepassing van ventilatoren met een geoptimaliseerde waaier in combinatie met een EC-motor (borstelloze gelijkstroommotor) wordt een substantiele energiebesparing gerealiseerd. Er wordt op verschillende aspecten ingegaan. Onder meer het verschil tussen een AC- en EC-motor, tussen vrijlopende en slakkenhuisventilatoren, tussen direct- of indirect-gedreven schoepen en tussen voorwaarts- of achterwaartsgebogen schoepen. Aan de hand van vergelijkingen en diagrammen wordt de energiewinst zichtbaar gemaakt.

  8. Energy conservation and the residential and commercial sector

    Science.gov (United States)

    1975-01-01

    A detailed analysis of energy conservation actions relevant to the residential and commercial sector has led to the conclusion that the potential for savings is great. The task will not be easy, however, since many of the actions require significant life style changes that are difficult to accomplish. Furthermore, many of the conservation actions cited as instant solutions to the energy crisis are those with only mid to long term potential, such as solar energy or heat pumps. Three significant conservation approaches are viable: adjusting price structure, mandating actions, and educating consumers. The first two appear to be the most feasible. But they are not without a price. Higher utility bills adversely affect the poor and the elderly on fixed incomes. Likewise, strict mandatory measures can be quite distasteful. But the effect of alternatives, such as voluntary savings accomplished through education processes, is minimal in a nation without a true conservation ethic.

  9. Transportation energy conservation data book: edition I. 5

    Energy Technology Data Exchange (ETDEWEB)

    Shonka, D B; Loebl, A S; Ogle, M C; Johnson, M L; Howard, E B

    1977-01-01

    This document contains statistical information on the major transportation modes, their respective energy consumption patterns, and other pertinent factors influencing performance in the transportation sector. Data relating to past, present, and projected energy use and conservation in the transportation sector are presented under seven chapter headings. These focus on (1) modal transportation characteristics, (2) energy characteristics of the transportation sector, (3) energy conservation alternatives involving the transportation sector, (4) government impacts on the transportation sector, (5) the supply of energy to the transportation sector, (6) characteristics of transportation demand, and (7) miscellaneous reference materials such as energy conversion factors and geographical maps. References are included for each set of data presented, and a more general bibliography is included at the end of the book. In addition, a glossary of key terms and a subject index is provided for the user. A second edition of this document is scheduled for publication in September 1977.

  10. The animal feed and energy conservation properties of Avotan (Avoparcin)

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, C W [Strathclyde Univ., Glasgow (United Kingdom); O` Beirne, P [Cyanamid (United Kingdom) Ltd. (United Kingdom). Animal Health Div.

    1994-12-31

    AVOTAN, avoparcin is a glycopeptide antibiotic manufactured by Cyanamid (UK) via the fermentation of a strain of Streptomyces candidus. The gross energy requirement of manufacturing avoparcin is calculated and compared with the gross energy savings of feed utilisation when used in animal feeding regimes for broiler chickens, pigs, beef cattle and dairy cows for milk production. Avoparcin improves farm animal production in terms of liveweight gains and feed conversion efficiency. So, by conserving animal feed it conserves the energy which would have been expended to produce that animal feed. The energy savings thus calculated range from one to two orders of magnitude on an energy ratio basis and so are very significant. The widespread use of avoparcin in world agriculture is therefore very beneficial in an energy conservation context. (Author)

  11. Energy conservation by hyperfiltration: food industry background literature survey

    Energy Technology Data Exchange (ETDEWEB)

    1980-04-15

    The application of hyperfiltration to selected food product streams and food processing wastewaters for energy conservation was examined. This literature survey had led to the following conclusions: no research has been conducted in the food industry using membranes with hot process streams due to the temperature limitation (< 40/sup 0/C) of the typically studied cellulose acetate membranes; based on the bench-scale research reviewed, concentration of fruit and vegetable juices with membranes appears to be technically feasible; pretreatment and product recovery research was conducted with membranes on citrus peel oil, potato processing and brine wastewaters and wheys. The experiments demonstrated that these applications are feasible; many of the problems that have been identified with membranes are associated with either the suspended solids or the high osmotic pressure and viscosity of many foods; research using dynamic membranes has been conducted with various effluents, at temperatures to approx. 100/sup 0/C, at pressures to 1200 psi and with suspended solids to approx. 2%; and, the dynamic membrane is being prototype tested by NASA for high temperature processing of shower water. The literature review substantiates potential for dynamic membrane on porous stainless tubes to process a number of hot process and effluent streams in the food processing industry. Hot water for recycle and product concentrations are major areas with potential for economic application. The two plants involved in the first phase of the project should be reviewed to identify potential energy conservation applications. As many as possible of the conservation applications should be tested during the screening phase at each site. The most promising applications at each site should be evaluated more intensively to establish engineering estimates of the economics of this technology for the canned fruit and vegetable segment of the food industry.

  12. Windows constructons from ecological materials fullfilling specifications of low energy consuming - and passive building architecture as also the new energy conservation ordinance; Fensterkonstruktion aus oekologischen Baustoffen entsprechend den Anforderungen der Niedrigenergie- und Passivhausbauweise sowie der neuen Energieeinsparverordnung EnEV. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Mack, R.

    2002-04-01

    A newly developed window system for passive standard buildings was investigated with regard to its thermal properties, airtightness, tightness in driving rain, and acoustic properties. The emphasis was on the optimisaiton of the total heat transfer coefficient and the absence of cold gaps between windows, frames, and walls. This involved simulations in consideration of the Energy Conservation Ordinance and current standards and regulations. The measurements and simulations proved that the window was superior to the requirements of current regulations, so the window system was certified as a recommended component for passive buildings (''Passivhaustaugliche Komponente''). Further, an ecological life cycle analysis was carried out, also with good results. A marketing strategy was developed for the new window system and for other components produced by medium-sized organizations.

  13. Energy conservation and technological change as factors in climate change - a pulp and paper industry example

    Energy Technology Data Exchange (ETDEWEB)

    Koleff, A.M. [Stone Container Corp., Tucker, GA (United States)

    1997-12-31

    The Pulp and Paper Industry in the United States is one of this country`s most energy intensive industries with energy generally being the second or third largest direct operating expense in mill budgets. As such, the industry has long had an effective energy conservation program and has recorded impressive reductions in energy use. It is also one of the two most capital intensive industries in the United States and has a long capital investment cycle, which can be estimated by various techniques at between 20 and 30 years. This paper discusses the estimated impact of the industry`s energy conservation achievements on long term emission reductions of greenhouse gases and will show how technological changes within the industry have impacted past emission reductions and the prospects for continued progress through emerging technologies. The importance to the global competitiveness of the industry of implementing technological change designed to reduce the emission of greenhouse gases within the industry`s normal investment cycle will also be reviewed.

  14. (Re-)programming of subtype specific cardiomyocytes.

    Science.gov (United States)

    Hausburg, Frauke; Jung, Julia Jeannine; Hoch, Matti; Wolfien, Markus; Yavari, Arash; Rimmbach, Christian; David, Robert

    2017-10-01

    Adult cardiomyocytes (CMs) possess a highly restricted intrinsic regenerative potential - a major barrier to the effective treatment of a range of chronic degenerative cardiac disorders characterized by cellular loss and/or irreversible dysfunction and which underlies the majority of deaths in developed countries. Both stem cell programming and direct cell reprogramming hold promise as novel, potentially curative approaches to address this therapeutic challenge. The advent of induced pluripotent stem cells (iPSCs) has introduced a second pluripotent stem cell source besides embryonic stem cells (ESCs), enabling even autologous cardiomyocyte production. In addition, the recent achievement of directly reprogramming somatic cells into cardiomyocytes is likely to become of great importance. In either case, different clinical scenarios will require the generation of highly pure, specific cardiac cellular-subtypes. In this review, we discuss these themes as related to the cardiovascular stem cell and programming field, including a focus on the emergent topic of pacemaker cell generation for the development of biological pacemakers and in vitro drug testing. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. 29 CFR 99.235 - Program-specific audits.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Program-specific audits. 99.235 Section 99.235 Labor Office... § 99.235 Program-specific audits. (a) Program-specific audit guide available. In many cases, a program... schedule of prior audit findings consistent with the requirements of § 99.315(b), and a corrective action...

  16. 14 CFR 91.1017 - Amending program manager's management specifications.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Amending program manager's management... Ownership Operations Program Management § 91.1017 Amending program manager's management specifications. (a... specifications; or (2) The program manager applies for the amendment of any management specifications, and the...

  17. Energy conservation in the primary aluminum and chlor-alkali industries

    Energy Technology Data Exchange (ETDEWEB)

    1980-10-01

    The primary aluminum and chlor-alkali industries together use nearly 13% of the electrical energy consumed by US industry. As part of its mission to promote energy conservation in basic US industries, the DOE surveys the present technological status of the major electrochemical industries and evaluates promising technological innovations that may lead to reduced energy requirements. This study provides technical and economic analyses in support of a government program of research and development in advanced electrolytic technology. This program is intended to supplement the development efforts directed toward energy savings by private industry. Sections II and III of this report cover aluminum and chlorine production processes only, since these two industries represent over 90% of the electrical energy requirements of all electrolytic industries in the United States. Section IV examines barriers to accelerated research and development by the electrolytic industries, and makes suggestions for government actions to overcome these barriers.

  18. 76 FR 47518 - Energy Conservation Program: Treatment of “Smart” Appliances in Energy Conservation Standards and...

    Science.gov (United States)

    2011-08-05

    .... Typical examples of operating changes include load shifting and load shedding in response to a price.... DOE seeks estimates and underlying assumptions for market share penetration estimates of ``smart...

  19. 76 FR 78174 - Energy Conservation Program: Test Procedure and Energy Conservation Standard for Set-Top Boxes...

    Science.gov (United States)

    2011-12-16

    ... exist or are in development that would significantly affect consumer behavior and/or STB energy... consumption for future models of STBs, and projected usage profiles based on new studies on consumer behavior... functionality.\\15\\ The DVR alters STB behavior and consumer behavior by allowing the consumer to record content...

  20. Overview of energy-conserving development planning and design techniques based on five case studies

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    Findings and recommendations are presented of a review of five case studies of ways to conserve energy through development planning and site design in communities. Two approaches were used. In the first approach, a conventional, pre-existing plan was analyzed to determine potential energy use. Once energy-conservation options were identified and evaluated, the conventional plan was modified by employing those options. This approach was used in The Woodlands, Burke Center, and Radisson studies. In the second approach, energy-conservation options are independently identified and evaluated. Those options that passed specific criteria screening were then utilized in developing one or more totally new plans based on energy objectives. This approach was used in Greenbrier and Shenandoah. Radisson is a new town on the outskirts of Syracuse, New York. Greenbrier is a 3000 acre planned community adjacent to Norfolk and Virginia Beach. Shenandoah is a proposed new town in the Atlanta urbanized area. The Woodlands is a new community under development north of Houston. Burke Center is a residential planned unit development in Fairfax County, Virgnia. (MCW)

  1. Energy conservation in the earth's crust and climate change.

    Science.gov (United States)

    Mu, Yao; Mu, Xinzhi

    2013-02-01

    Among various matters which make up the earth's crust, the thermal conductivity of coal, oil, and oil-gas, which are formed over a long period of geological time, is extremely low. This is significant to prevent transferring the internal heat of the earth to the thermal insulation of the surface, cooling the surface of the earth, stimulating biological evolution, and maintaining natural ecological balance as well. Fossil energy is thermal insulating layer in the earth's crust. Just like the function of the thermal isolation of subcutaneous fatty tissue under the dermis of human skin, it keeps the internal heat within the organism so it won't be transferred to the skin's surface and be lost maintaining body temperature at low temperatures. Coal, oil, oil-gas, and fat belong to the same hydrocarbons, and the functions of their thermal insulation are exactly the same. That is to say, coal, oil, and oil-gas are just like the earth's "subcutaneous fatty tissue" and objectively formed the insulation protection on earth's surface. This paper argues that the human large-scale extraction of fossil energy leads to damage of the earth's crust heat-resistant sealing, increasing terrestrial heat flow, or the heat flow as it is called, transferring the internal heat of the earth to Earth's surface excessively, and causing geotemperature and sea temperature to rise, thus giving rise to global warming. The reason for climate warming is not due to the expansion of greenhouse gases but to the wide exploitation of fossil energy, which destroyed the heat insulation of the earth's crust, making more heat from the interior of the earth be released to the atmosphere. Based on the energy conservation principle, the measurement of the increase of the average global temperature that was caused by the increase of terrestrial heat flow since the Industrial Revolution is consistent with practical data. This paper illustrates "pathogenesis" of climate change using medical knowledge. The

  2. Energy conservation through the implementation of cogeneration and grid interconnection

    International Nuclear Information System (INIS)

    Dashash, M. A.

    2007-01-01

    With increasing awareness of energy conservation and environmental protection, the Arab World is moving to further improve energy conversion efficiency. The equivalent of over 2.7 MM bbl is being daily burnt to fuel the thermal power plants that represent 92% of the total Arab power generation. This adds up to close to one billion barrels annually. At a conservative 30$ per barrel, this represents a daily cost of over $81 Million. This paper will introduce two strategies with the ultimate objective to cut-off up to half of the current fuel consumption. Firstly, Cogeneration Technology is able to improve thermal efficiency from the current average of less than 25% to up to 80%. Just 1% improvement in power plant thermal efficiency represents 3 million $/day in fuel cost savings. In addition, a well-designed and operated cogeneration plant will: - Reduce unfriendly emissions by burning less fuel as a result of higher thermal efficiency, - Increase the decentralization of electrical generation, - Improve the reliability of electricity supply. As an example, the Kingdom of Saudi Arabia's experience of implementing cogeneration will be presented, in particular within its hydrocarbon facilities and desalination plants. This will include the existing facilities and the planned and on-going projects. Secondly, by interconnecting the power networks of all the adjacent Arab countries, the following benefits could be reached: - Reduce generation reserves and enhance the system reliability, - Improve the economic efficiency of the electricity power systems, - Provide power exchange and strengthen the supply reliability, - Adopt technological development and use the best modern technologies. At least two factors plead for this direction. On one hand, the four-hour time zone difference from Eastern to Western Arab World makes it easy to exchange power. On the other hand, this will help to reduce the reserve capacity and save on corresponding Capital investment, fuel, and O and M

  3. Atomic energy, environment and energy conservation in Eastern Europe

    International Nuclear Information System (INIS)

    Kanno, Koko

    1990-01-01

    About 12 % of generated electric power is the nuclear power in Eastern European countries. Generally electric power is short in these countries, and as the countermeasures for environment, the promotion of nuclear power generation is considered. However, the public opinion opposing it is also strong. The situation in respective countries is briefly discussed. The prevention of warming of the earth and the reduction of carbon dioxide gas release are the largest environmental problems discussed in western countries, but in Eastern European countries, the far more primitive problem of the damage due to SO 2 is serious. Notwithstanding high sulfur brown coal is the main fuel, the installation of desulfurizing facilities has been neglected. The demand for the countermeasures to environmental pollution by people has become strong. The energy efficiency in Eastern European countries is poor, and it is one of the causes of environmental pollution. The industrial structure is centering around heavy industries which consume much energy, the energy loss arises due to the delay of equipment modernization, and the energy is cheap, so its saving is neglected. Energy conservation is important. (K.I.)

  4. A compendium of energy conservation: Success stories 90

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    The Department of Energy's (DOE) Office of Conservation and Renewable Energy proudly presents this summary of some its most successful projects and activities. The projects included in this document have made significant contributions to improving energy efficiency and fuel flexibility in the United States. The energy savings that can be realized from these projects are considerable. Americans have shown an impressive ability to reduce energy consumption since 1973. Studies show that 34 quadrillion Btus (quads) of energy were saved in 1988 alone as a result of energy conservation and other factors. These savings, worth approximately $180 billion, represent more energy than the United States obtains from any other single source. The availability of new, energy-efficient technologies has been an important ingredient in achieving these savings. Federal efforts to develop and commercialize energy-saving technologies and processes are a part of the reason for this progress. Over the past 10 years, DOE has carefully invested more than $2 billion in hundreds of research and development (R D) projects to ensure the availability of advanced technology in the marketplace. These energy-efficient projects are carried out through DOE's Office of Conservation and Renewable Energy and reflect opportunities in the three energy-consuming, end-use sectors of the economy: buildings, transportation, and industry.

  5. Energy conservation on Nova Scotia farms: Baseline energy data

    International Nuclear Information System (INIS)

    Bailey, J.A.; Gordon, R.; Burton, D.; Yiridoe, E.K.

    2008-01-01

    Direct energy use is a small but essential component of the farm greenhouse gas (GHG) budget. Improvements in energy efficiency and renewable energy can help reduce farm operating costs, improve air quality and reduce GHG emission levels. Energy conservation is especially important in Nova Scotia (NS), Canada, where fossil fuels, particularly coal, remain the primary source of electrical generation. Responses from mail surveys were used to establish baseline data on a cross-section of NS farms with respect to direct energy costs and usage to demonstrate differences in farm type and size. A 32% (N=224) response rate was achieved. Based on this survey, the average energy bill for a NS farm in 2004 was $11,228, with most (61.7%) of their energy cost attributable to the purchase of petroleum products. Almost all farmers (96.4%) indicated that their energy cost was a primary concern. Farmers identified the operation of vehicles and mobile equipment, as well as lighting and heating as having the greatest energy requirements in their operations. Energy usage varied with farm type and size. NS farms consumed 1.2 petajoules of energy equivalent to 127 kilotonnes of CO 2 with 52.7% of emissions from electricity use in 2004

  6. Energy conservation in selected buildings, Gdansk. 1. final report

    International Nuclear Information System (INIS)

    1997-02-01

    This Final Report marks the end of the implementation stage of the project: 'Energy Conservation in Selected Buildings in Gdansk, Poland' supported by the Danish Environment-related Energy Sector Programme for Poland under the Danish Energy Agency. The residential and commercial sectors together with public buildings account for 40-45% of the total energy consumption and are dominated by the use of space heating and hot water. The sector has a significant over-consumption of energy, which first of all is due to the lack of or too weak incentives for the individual tenants to decrease the energy consumption. Bad thermal insulation of buildings and inefficient central heating systems with a widespread lack of measurement and automatic control systems give cause for extensive heat losses. The objective of the project has been to document the effects of energy savings in 18 multi-family houses when different types of energy saving measures are applied. These measures include thermal insulation of buildings, refurbishment of the heating system and introduction of individual billing system for heating and hot tap water. Energy audits of 18 buildings were performed by combination of on-site inspection of all buildings and data collection from the available drawings, technical descriptions, etc. The on-site inspection was carried out by use of an energy audit scheme specially developed for this project. (EG)

  7. Energy conservation and the environment: conflict or complement

    Energy Technology Data Exchange (ETDEWEB)

    Schipper, L.

    1978-09-01

    The policy discussion following the Oil Embargo was clouded with fears of a return to a primitive existence based on drastically reduced energy inputs to society, or, on the other hand, an abandoning of environmental goals, allegedly a major barrier to development of new energy supplies. Often the energy use associated with environmental improvements was cited as a reason for expanding energy supplies, as if to say that a conflict existed between a clean environment and reductions in energy use. Or it was argued that a relaxation of environmental goals would lower the direct costs of harvesting and using energy and thereby alleviate the need for energy conservation. It has also been argued that the geopolitics of energy alone will force us to substitute riskier or ''dirtier'' energy sources for relatively clean oil and gas. Indeed, there is no question that the relationship among energy, the environment, and economic well-being is complicated. This essay sorts out many of the confusing aspects in order to show how goals relating to the efficient use of energy are aligned both with traditional economic goals and with modern environmental goals. To do this the author analyzes in depth the role of energy in the economy and, using examples, traces the origins of many of the misconceptions about that role--misconceptions that have inhibited a profound discussion of energy-related goals.

  8. A Compendium of Energy Conservation: Success Stories 90

    Science.gov (United States)

    1990-12-01

    The Department of Energy's (DOE) Office of Conservation and Renewable Energy proudly presents this summary of some its most successful projects and activities. The projects included in this document have made significant contributions to improving energy efficiency and fuel flexibility in the United States. The energy savings that can be realized from these projects are considerable. Americans have shown an impressive ability to reduce energy consumption since 1973. Studies show that 34 quadrillion Btus (quads) of energy were saved in 1988 alone as a result of energy conservation and other factors. These savings, worth approximately $180 billion, represent more energy than the United States obtains from any other single source. The availability of new, energy-efficient technologies has been an important ingredient in achieving these savings. Federal efforts to develop and commercialize energy-saving technologies and processes are a part of the reason for this progress. Over the past 10 years, DOE has carefully invested more than $2 billion in hundreds of research and development (R&D) projects to ensure the availability of advanced technology in the marketplace. These energy-efficient projects are carried out through DOE's Office of Conservation and Renewable Energy and reflect opportunities in the three energy-consuming, end-use sectors of the economy: buildings, transportation, and industry.

  9. Local policies for DSM: the UK's home energy conservation act

    International Nuclear Information System (INIS)

    Jones, E.; Leach, M.

    2000-01-01

    Residential energy use accounts for approximately 28 per cent of total primary energy use in the UK, with consumption in this sector forecast to increase due partly to expanding numbers of households. Finding ways to reduce residential energy consumption must form a key part of the climate change strategies of the UK and all developed countries. In 1995, an innovative piece of legislation was passed in the UK, devolving residential energy efficiency responsibility to local government. Under 'The Home Energy Conservation Act' (HECA), local authorities are obliged to consider the energy efficiency of private as well as public housing stock. Authorities were given a duty to produce a strategy for improving residential energy efficiency in their area by 30 per cent in the next 10-15 years. This paper describes the enormous variation in the quality of local authorities' strategies and discusses reasons for this variation. Based on a nationwide survey of HECA lead officers, it considers the opportunities and constraints facing local authorities, and what has been achieved to-date under the Act. It also examines how HECA fits into the UK's national energy policy and explains the roles of other institutions across the public, private and voluntary sector in facilitating implementation of the Act. Finally, the paper considers how other countries can learn from the UK's HECA experience and can use the Act as a template to apply the principle of subsidiarity to this area of environmental policy. (Author)

  10. The status of energy conservation in Taiwan's cement industry

    International Nuclear Information System (INIS)

    Su, Te-Li; Chan, David Yih-Liang; Hung, Ching-Yuan; Hong, Gui-Bing

    2013-01-01

    The cement industry represents one of the most energy intensive sectors in Taiwan. Energy audits are the direct tools which are employed to help reduce energy consumption. The objectives of energy audits are to establish energy audit systems, provide on-site energy audit service and reduce production cost. This study summarized the energy savings implemented in Taiwan's cement industry; the data were obtained from the on-line Energy Declaration System in 2010. The total implemented energy savings amounted to 68,512 kilo liter of crude oil equivalent (KLOE). The energy audit group audited seven Taiwanese cement plants in 2011 and revealed an energy saving potential of 2571.6 MWh of electricity and 1002.8 KLOE of thermal energy. The total potential energy saving was 1708.5 KL of crude oil equivalent (KLOE), equivalent to a 4560 t reduction in CO 2 emissions, representing the annual CO 2 absorption capacity of a 122 ha forest plantation. - Highlights: • This study summarizes the energy savings implemented in Taiwan's cement industry from the on-line Energy Declaration System. • The energy audit group audited seven Taiwanese cement plants in 2011 and revealed energy saving potential was 1708.5 KLOE. • This work aims to examine what Taiwan has done and also describes the current status in cement industry. • In addition, some potential energy conservation opportunities or measures are revealed in this paper

  11. Machine learning of accurate energy-conserving molecular force fields

    Science.gov (United States)

    Chmiela, Stefan; Tkatchenko, Alexandre; Sauceda, Huziel E.; Poltavsky, Igor; Schütt, Kristof T.; Müller, Klaus-Robert

    2017-01-01

    Using conservation of energy—a fundamental property of closed classical and quantum mechanical systems—we develop an efficient gradient-domain machine learning (GDML) approach to construct accurate molecular force fields using a restricted number of samples from ab initio molecular dynamics (AIMD) trajectories. The GDML implementation is able to reproduce global potential energy surfaces of intermediate-sized molecules with an accuracy of 0.3 kcal mol−1 for energies and 1 kcal mol−1 Å̊−1 for atomic forces using only 1000 conformational geometries for training. We demonstrate this accuracy for AIMD trajectories of molecules, including benzene, toluene, naphthalene, ethanol, uracil, and aspirin. The challenge of constructing conservative force fields is accomplished in our work by learning in a Hilbert space of vector-valued functions that obey the law of energy conservation. The GDML approach enables quantitative molecular dynamics simulations for molecules at a fraction of cost of explicit AIMD calculations, thereby allowing the construction of efficient force fields with the accuracy and transferability of high-level ab initio methods. PMID:28508076

  12. Energy conservation in selected buildings, Gdansk. 1. final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    This Final Report marks the end of the implementation stage of the project: `Energy Conservation in Selected Buildings in Gdansk, Poland` supported by the Danish Environment-related Energy Sector Programme for Poland under the Danish Energy Agency. The residential and commercial sectors together with public buildings account for 40-45% of the total energy consumption and are dominated by the use of space heating and hot water. The sector has a significant over-consumption of energy, which first of all is due to the lack of or too weak incentives for the individual tenants to decrease the energy consumption. Bad thermal insulation of buildings and inefficient central heating systems with a widespread lack of measurement and automatic control systems give cause for extensive heat losses. The objective of the project has been to document the effects of energy savings in 18 multi-family houses when different types of energy saving measures are applied. These measures include thermal insulation of buildings, refurbishment of the heating system and introduction of individual billing system for heating and hot tap water. Energy audits of 18 buildings were performed by combination of on-site inspection of all buildings and data collection from the available drawings, technical descriptions, etc. The on-site inspection was carried out by use of an energy audit scheme specially developed for this project. (EG)

  13. Nuclear energy without reprocessing: a future made possible by energy conservation

    International Nuclear Information System (INIS)

    Feiveson, Harold

    1987-01-01

    The achievements of energy conservation and the promise of future progress have rendered economically unattractive for many decades the separation of plutonium from spent reactor fuel (reprocessing) and its recycle into breeder or light water reactors. Despite this, reprocessing and recycle are already underway in Europe and Japan. If unchecked, these activities, by the end of the century, will lead to an annual flow in routine commerce of tens of thousands of kilograms of separated plutonium, a circumstance which would pose a grave threat to international security. However, continued stagnation of nuclear power programs in much of the world, due significantly to greatly reduced growth rates in electricity demand, will underscore the economic folly of reprocessing and recycle and may eventually encourage their abandonment. (author)

  14. Energy conservation awareness and practice in restaurants of Hennepin County, Minnesota.

    Science.gov (United States)

    Brondum, Jack; Palchick, Susan

    2012-12-01

    Greenhouse gases result mainly from the combustion of fossil fuels in energy use. Restaurants use large amounts of energy in their operation but systematically gathered information about such use is lacking. Hennepin County Human Services and Public Health Department surveyed owners of licensed restaurants to assess their energy use and awareness of energy conservation measures. Of 434 owners surveyed, 276 (63.6%) returned completed surveys. Responses indicated that large pluralities or majorities of restaurant owners often were aware of energy-efficient methods of operation and the means to achieve greater efficiency but used such means much less frequently. For example, 57% of respondents were familiar with the U.S. Environmental Protection Agency's Energy Star program, but only 33% of this group actually used Energy Star appliances. Given the gap between awareness and practice, opportunities for consultation and outreach to restaurant owners about energy-efficient business operation are manifold.

  15. Modern money theory and ecological tax reform: A functional finance approach to energy conservation

    Science.gov (United States)

    McConnell, Scott L. B.

    This dissertation contributes to heterodox economics by developing a theoretical and policy-relevant link that will promote the conservation of energy while driving the value of the domestic currency. The analysis relies upon the theoretical foundation of modern money theory and functional finance, which states that "taxes-drive-money" where the value of a sovereign nation's currency is imputed through the acceptance by the sovereign nation of the currency in payment of taxation. This theoretical perspective lends itself to various public policy prescriptions, such as government employment policies or the employer of last resort (ELR), which has been discussed at length elsewhere (Wray 1998; Tcherneva 2007, Forstater 2003). This research contributes to this overall program by arguing that the basis for taxation under modern money theory allows public policy makers various alternatives regarding the make-up of the tax system in place. In particular, following functional finance, taxes do not have the sole purpose of paying for government spending, but rather drive the value of the currency and may be designed to perform other functions as well, such as penalizing socially undesirable behavior. The focus in this dissertation is on the amelioration of pollution and increasing energy conservation. The research question for this dissertation is this: what federally implemented tax would best serve the multiple criteria of 1) driving the value of the currency, 2) promoting energy conservation and 3) ameliorating income and wealth disparities inherent in a monetary production economy? This dissertation provides a suggestion for such a tax that would be part of a much larger overall policy program based upon the tenets of modern money theory and functional finance. Additionally, this research seeks to provide an important theoretical contribution to the emerging Post Keynesian and ecological economics dialog.

  16. ASEAN-USAID Buildings Energy Conservation Project. Final report, Volume 3: Audits

    Energy Technology Data Exchange (ETDEWEB)

    Loewen, J.M.; Levine, M.D.; Busch, J.F. [eds.

    1992-06-01

    The auditing subproject of the ASEAN-USAID Buildings Energy Conservation Project has generated a great deal of auditing activity throughout the ASEAN region. Basic building characterisfic and energy consumption data were gathered for over 200 buildings and are presented in this volume. A large number of buildings were given more detailed audits and were modeled with either the ASEAM-2 computer program or the more complex DOE-2 program. These models were used to calculate the savings to be generated by conservabon measures. Specially audits were also conducted, including lighting and thermal comfort surveys. Many researchers in the ASEAN region were trained to perform energy audits in a series of training courses and seminars. The electricity intensifies of various types of ASEAN buildings have been calculated. A comparison to the electricity intensity of the US building stock tentatively concludes that ASEAN office buildings are comparable, first class hotels and retail stores are more ewctricity intensive than their US counterparts, and hospitals are less intensive. Philippine and Singapore lighting surveys indicate that illuminance levels in offices tend to be below the minimum accepted standard. Computer simulations of the energy use in various building types generally agree that for most ASEAN buildings, electricity consumption for air-conditioning (including fan power) consumes approximately 60% of total building electricity. A review of the many studies made during the Project to calculate the savings from energy conservation opportunities (ECOS) shows a median potential savings of approximately 10%, with some buildings saving as much as 50%. Singapore buildings, apparently as a result of previously implemented efficient energy-use practices, shows a lower potential for savings than the other ASEAN nations. Air-conditioning ECOs hold the greatest potential for savings.

  17. Consumer behavior and energy conservation. A policy-oriented field experimental study on the effectiveness of behavioral interventions promoting residential energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Ester, P

    1984-01-01

    The primary goal of this study is to investigate the effectiveness of behavioral interventions aimed at promoting energy conservation by consumers. It is argued that energy conservation has many advantages over other energy policy options, especially with respect to sociopolitical, economic, technical, safety and environmental considerations. Theories are discussed which deal with micromotives behind individual energy consumption and their macroconsequences. Antecedent and consequence behavioral interventions (information/education, prompting, modeling, feedback, self-monitoring, reinforcement/punishment) for promoting energy conservation by consumers are analyzed, and an extensive review is presented of behavioral experiments conducted in this area. Discussed is how the field experiment, which was conducted in five cities in the Netherlands with appr. 400 subjects, has been implemented. Hypotheses are tested regarding belief structures with respect to energy conservation. Provided are data about the absolute and relative effectiveness of energy conservation information, biweekly and monthly feedback, and self-monitoring in encouraging consumers to conserve energy. Hypotheses are tested about cognitive aspects related to responsiveness to behavioral interventions and attitude change toward energy conservation. Conclusions are presented and some energy policy recommendations and directions for future research are formulated. (J.C.R.)

  18. ALINET: a model for assessing energy conservation opportunities in the food processing industry. Final technical report, September 1977-December 1979

    Energy Technology Data Exchange (ETDEWEB)

    Levis, A H; Ducot, E R; Levis, I S; Webster, T F

    1979-12-01

    ALINET is a network model designed for the analysis of energy use in the food processing and distribution sector and for the evaluation of the potential effectiveness of energy conserving technologies. The conceptual framework of the model, as well as the design and implementation of the computer software are described. The wheat system at the national, state, and facility-specific level is used to illustrate the model's operation and use. A pilot project, carried out in cooperation with industry, is described in which energy use in (a) hard wheat milling, and (b) durum milling and pasta manufacture is analyzed. Finally, the introduction of an alternative technology for pasta drying is assessed in terms of energy conservation and cost. Recommendation for further applications and institutionalization of the model are made.

  19. Insulation performance data and assessment procedures for steam kiln energy conservation investments

    Energy Technology Data Exchange (ETDEWEB)

    Zaccor, J.V.

    1980-09-01

    For a demonstration project, the costs and benefits of insulating concrete block curing kilns to isolate the kiln thermal mass from the curing cycle are determined. Data were developed on service life of FOAMGLAS insulation, the effect of Johnson burners on the insulation and mounting, performance of an alternative insulation (a rapidly installed, spray-on polyurethane foam), and a simple incentive to promote implementation of industrial energy conservation concepts. Data are tabulated and compared for the FOAMGLAS and CPR 480 polyurethane insulations. Specific studies of insulation that was installed on inside surfaces of kilns to lock the kiln-mass out of the curing cycle are given for Blocklite plant in California, the Ameron pipe plant in California, and the Superlite plant in Phoenix, Arizona. (MCW)

  20. Dynamic energy conservation model REDUCE. Extension with experience curves, energy efficiency indicators and user's guide

    International Nuclear Information System (INIS)

    Uyterlinde, M.A.; Rijkers, F.A.M.

    1999-12-01

    The main objective of the energy conservation model REDUCE (Reduction of Energy Demand by Utilization of Conservation of Energy) is the evaluation of the effectiveness of economical, financial, institutional, and regulatory measures for improving the rational use of energy in end-use sectors. This report presents the results of additional model development activities, partly based on the first experiences in a previous project. Energy efficiency indicators have been added as an extra tool for output analysis in REDUCE. The methodology is described and some examples are given. The model has been extended with a method for modelling the effects of technical development on production costs, by means of an experience curve. Finally, the report provides a 'users guide', by describing in more detail the input data specification as well as all menus and buttons. 19 refs

  1. Technical achievements in energy conservation by beverage-related processing industries: Breweries, dairies, distilleries and maltings

    Energy Technology Data Exchange (ETDEWEB)

    Fawkes, S D; Jacques, J K

    1986-01-01

    Patterns of adoption and adaptation of a wide range of energy-conserving technologies were observed in 1983-1984. The most widely employed techniques were low-energy lighting and power-factor correction, both of which generate significant savings with minimal alteration to process plant and working methods, are capable of great flexibility in their mode of application, and can be installed independently for small parts of the total plant, in a step-by-step manner. The generally disappointing findings are associated with internal management attitudes to full systematic treatments of energy-cost problems, artificially high barriers to investment, especially in smaller organisations, and widespread lack of commitment to, and understanding of, relevant innovation procedures. Site specific constraints are also important in some older production facilities.

  2. DEMONSTRATION OF THE DOE INTERIM ENERGY CONSERVATION STANDARDS FOR NEW FEDERAL RESIDENTIAL BUILDINGS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, A. D.; Baechler, H. C.; Di Massa, F. V.; Lucas, R. G.; Shankle, D. L.

    1992-01-01

    In accordance with federal legislation, the U.S. Department of Energy (DOE) has sponsored a study to demonstrate use of its Interim Energy Conservation Standards for New Federal Residential Buildings. The demonstration study was conducted by DOE and the Pacific Northwest Laboratory (PNL). The demonstration is the second step in a three-step process: I) development of interim standards, 2) demonstration of the interim standards, and 3) development of final standards. The standards are mandatory for federal agency housing procurements. Nevertheless, PNL found at the start of the demonstration that agency use of the interim standards had been minimal. The purpose of the standards is to improve the energy efficiency of federal housing and increase the use of nondepletable energy sources. In accordance with the legislation, the standards were to be performance-based rather than prescribing specific energy conservation measures. To fulfill this aspect of the legislation, the standards use a computer software program called COSTSAFR which generates a point system that individualizes the standards to specific projects based on climate, housing type, and fuel costs. The standards generate minimum energy-efficiency requirements by applying the life-cycle cost methodology developed for federal projects. For the demonstration, PNL and DOE chose five federal agency housing projects which had been built in diverse geographic and climate regions. Participating agencies were the Air Force, the Army (which provided two case studies), the Navy, and the Department of Health and Human Services. PNL worked with agency housing procurement officials and designers/architects to hypothetically apply the interim standards to the procurement and design of each housing project. The demonstration started at the point in the project where agencies would establish their energyefficiency requirements for the project and followed the procurement process through the designers' use of the point

  3. Energy conservation for houses and its calculation methods

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S H

    1981-04-01

    The concept of energy conservation of houses has been developed and began to be applied widely since the first oil crisis. Now we can say definitely that insulating a house is the most effective way of saving energy, and the renewable energy sources are useful only when the demand for space heating and hot water is minimized by insulating. If a house is well insulated, it will need a much smaller, simpler and cheaper heating system. So it will be less efficient to put a solar collector and wind generator on a poorly insulated house. Architects and engineers should have a certain level of practical knowledge of insulation for house to persuade customers using insulating materials and structure. Moreover, it is very essential to amend the existing building codes in order to facilitate this basic necessity. For instance, the Building Regulations of Denmark requires a U-value of 0.4 W/m/sup 2/ degC for heavy weight external wall. If the cavity wall has outer and inner leaf of just normal brick with internal finish of 20 mm cement mortar, which is a typical wall construction for houses in Korea, the thickness of insulation materials to the cavity can be calculated in order to fullfil the U-value of 0.4 W/m/sup 2/ degC in addition to the cavity of the external heavy wall: expanded polyurethane 58 mm, urea formaldehyde foam 67 mm, expanded polystyrene 78 mm, mineral wool 94 mm. The economic feasibility of solar heating system has been calculated. By applying 25% of the year inflation ratio for fuel cost, the result turns out economically comparable with solar heating systems.

  4. Application of energy conservation technologies in Indian industries

    International Nuclear Information System (INIS)

    Zubair, K.M.

    1992-01-01

    The quadrupling of oil prices in 1973 signaled the beginning of a crises period for the oil importing countries. It hampered the economic growth of developed and developing countries alike. The pace of industrialization slowed down, recession set in and the oil importing developing nations found their balance of payment situation steadily going worse. The second increase of oil prices in 1979 further compounded the problems. It did seem that the problem of economic growth and increasing debt burden was intractable as far as developing nations were concerned. Behind this turmoil were the faint stirrings of alternative actions that sought to wean the world from its oil and fossil fuel dominated economies. These alternatives ranged from harnessing renewable energy sources, such as solar, wind and biomass to implementing end-use energy efficiency strategies. A major lesson of the oil crunch era was that energy efficiency is tangible resource by itself that competes economically with contemporary energy supply options. In addition to this, four major national priorities, viz, economic competitiveness, utilization of scare capital for development, environmental quality and energy security through oil dependence provided an urgent rationale for saving energy. While conservation consciousness has already taken roots in Pakistan industry, it needs to be nurtured and gains need to be consolidated. The need of the hour is to take stock of the situation elsewhere, particularly in similar geographical and socio-economic situations, and plan for an energy efficient tomorrow. This article attempts to delineate the notable developments that have taken place in the application of energy conservation technologies in the Indian industries. These efforts have had a salutary effect on the Indian value added sector which was saddled with old plant and machinery designed in the era of cheap energy. (author)

  5. 10 CFR 455.110 - Grant application submittals for technical assistance and energy conservation measures.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Grant application submittals for technical assistance and... Grant application submittals for technical assistance and energy conservation measures. (a) Each... assistance for energy conservation measures, including renewable resource measures, shall include the...

  6. 76 FR 45606 - Desert Renewable Energy Conservation Plan, Habitat Conservation Plan and Possible Land Use Plan...

    Science.gov (United States)

    2011-07-29

    ...-N131; 80221-1112-80221-F2] Desert Renewable Energy Conservation Plan, Habitat Conservation Plan and Possible Land Use Plan Amendment, Southern California: Environmental Impact Statement AGENCY: Fish and..., as amended, for the proposed Desert Renewable Energy Conservation Plan (DRECP). The EIS will be a...

  7. Energy conservation in the residential sector : The role of policy and market forces

    NARCIS (Netherlands)

    Aydin, Erdal

    2016-01-01

    In recent years, energy conservation has been a hot topic of debate among policy makers and researchers due to the concerns about global climate change and energy dependency. From a policy perspective, residential sector has been an important target for energy conservation policies as it is a major

  8. The potential energy conservation of the Dutch industrial, business and service sector

    International Nuclear Information System (INIS)

    Van der Werff, R.L.; Opschoor, J.B.

    1992-01-01

    The database ICARUS has been used as a starting point to estimate the economical potential for energy conservation in different sectors of the Dutch society. ICARUS is based on research on real energy consuming processes and applications in a number of sub-sectors of the Dutch economy. The present energy conservation potential in the Netherlands is based on energy conservation studies in the Netherlands and other countries. For this article the economical efficient energy conservation potentials in 1992 have been investigated for the Dutch sectors, which do not supply energy. The potentials are determined on the basis of the technical energy conservation potentials for the year 2000, according to the database ICARUS. Two methods were used to extract the economic potential from the technical potential: the method of the Net Market Value and the method of the payback period. From the ICARUS analysis it appears that the technical potential for energy conservation is 479 PJ, which is 28.8% of the primary energy consumption of 1664 PJ in 1985. The economic energy conservation potential is 262 PJ for a payback period of less than five years, which is 17% of the 1985 primary energy consumption. Next to the above-mentioned analysis policy-aimed simulations were carried out for three scenarios to determine economical energy conservation potentials. In one scenario doubled energy prices were used in comparison with the 1991 prices. Another scenario uses the Net Market Value method with a 5% discount rate, and the third scenario uses both parameters

  9. The Modern History of Energy Conservation: An Overview for Information Professionals

    OpenAIRE

    Wulfinghoff, Donald R.

    2000-01-01

    The current electricity crisis in California, along with high petroleum and natural gas prices everywhere, reminds us that energy conservation is a key to our survival as a civilization. This critical guide by the author of the Energy Efficiency Manual presents credible information sources on energy conservation.

  10. On Study of Application of Power Electronical Technology in Field of Energy Conservation

    Science.gov (United States)

    Song, Ke

    2017-09-01

    aiming at achieving the sustainable development in economy and improving living standard of the residents, the government departments in China have strengthened the promotion of green, low-carbon and sustainable development concepts. Under this context, the energy conservation concept is implemented during the implementation of social production and life activities. Currently, in order to ensure the improvement in social energy conservation benefits, the advanced technologies are applied by China's enterprises and residents. This paper, based on this, discusses the development situations of energy conservation in China, and analyzes the application of power electronical technology in the field of energy conservation, hoping to realize the sustainable development of energy conservation cause in China and to gain high yield.

  11. Energy conservation education. Need for coordination; Enoek-undervisning. Behov for koordinering

    Energy Technology Data Exchange (ETDEWEB)

    Novakovic, V

    1994-05-01

    This paper discusses the energy conservation education at university level in Norway. The energy law of 29 june 1990 marks a turning point in the Norwegian energy policy; the market forces are introduced as the most important means of achieving an efficient socio-economic management of the energy resources. The importance of energy conservation is more fully appreciated. The Government can motivate energy conservation in many ways, above all by means of information and training. The position of coordinator for teaching energy conservation was created at NTH (Norwegian Institute of Technology) in 1989. Later a professorship in energy conservation has been established there. The area of activity of the professor is limited to stationary energy use in buildings and industry. 5 refs.

  12. Formal Specification and Verification of Concurrent Programs

    Science.gov (United States)

    1993-02-01

    of examples from the emerging theory of This book describes operating systems in general programming languages. via the construction of MINIX , a UNIX...look-alike that runs on IBM-PC compatibles. The book con- Wegner72 tains a complete MINIX manual and a complete Wegnerflisting of its C codie. egner

  13. General versus program-specific welfare chauvinism

    DEFF Research Database (Denmark)

    Larsen, Christian Albrekt

    2018-01-01

    similarity across programs. The Danish welfare chauvinist attitudes are in general fuelled by lack of shared identity with migrants and sociotropic concerns about the economic burden of migration. The article finds little evidence of narrow self-interest effects; with a notable exception of disability...

  14. Energy conserving site design: Greenbrier case study, Chesapeake, Virginia. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-04-01

    A specific case study of project planning for energy conservation for a major planned unit development at the 3000-acre Greenbrier development site in Chesapeake, Virginia, is summarized. The research suggests that very considerable reductions in energy conservation can be achieved within the confines of private-sector land development and residential construction with increased incremental costs of $200.00 to $3150.00 per dwelling unit. It is hypothesized that energy consumption at Greenbrier can be reduced by one-half with an average annual savings of 21,275 kWh per residential unit, using state-of-the-art technology with careful planning and control. This represents an annual savings $750.00 per unit at the current utility rate of 3.5 cents per kWh. These savings can be achieved through reduction in heating and cooling loads and application of more-efficient heating and cooling of the remaining loads. The reduction in loads are achieved by redesign of the land plan to include a higher percentage of south-facing lots, use of vegetation to modify microclimate, decreases in air infiltration, the use of 2 x 6 framing, better insulation, and the use of an insulated slab-on-grade foundation. Further energy savings can be expected by increased efficiencies in mechanical systems used for space heating and cooling and domestic hot water. When applied to the single-family portion of Greenbrier, containing 541 dwelling units, these options reduce the total end-use energy consumption 54.7%. This reduction represents an annual savings of $432,800.00 for an initial capital investment of $1.7 million.

  15. Visible cost - invisible profit. The heating, ventilation and sanitary sector and the realization of energy conservation. Among politics, knowledge and practice

    International Nuclear Information System (INIS)

    Hubak, Marit

    1998-01-01

    In social research, technology has customarily been considered problem-generating. What is needed to turn new technology into a positive instrument in environmental work? To answer this question one must understand the interaction between politics, knowledge and practice that is important for dealing with the environmental challenges. It is a main objective of this book to contribute to this understanding by analysing how the building industry deals with the energy and environmental challenges that are commonly known as energy conservation. Specifically, the book deals with the heating, ventilation and sanitary sector since this is where most of the companies working with energy conservation are found. The discussion applies to Norway

  16. Counter of Energy Conservation and Emission Reduction for the Public in China

    Energy Technology Data Exchange (ETDEWEB)

    Wujun Wen; Xiaowen Liu; Geng Xu (Research Center for Sustainable Development of Shandong Province, Shandong Normal Univ., Jinan Shandong 250014 (China)). e-mail: wenwj@sdnu.edu.cn

    2009-05-15

    The Ministry of Science and Technology of China organized experts to develop the Internet-based software Counter of Energy Conservation and Emission Reduction to directly measure energy conservation and emission reduction potentials in people's daily lives. Research and testing of the software have been completed, and the software is available to the public on the Internet. The Counter of Energy Conservation and Emission Reduction software is being promoted with the aim of stimulating the public's enthusiasm for energy conservation and emission reduction. The software is of great significance in energy conservation and emission reduction education oriented to elementary and middle school students and community residents, thus changing the lagged public participation of Chinese citizens in energy conservation and emission reduction. The counter can calculate people's energy conservation and emission reduction potential in six aspects of daily life. The user can know his or her value of energy conservation and emission reduction in each aspect by clicking the options in keeping with his or her true daily routines. The user can also know the amounts of energy conservation and emission reduction as well as the potential energy conservation and emission reduction of the whole nation by clicking the Effect Calculation Button. Family life areas mainly include the methods and habits of water use, the use of energy conservation cookers, methods of saving paper, the use of environmental protection products, the habit of home appliance use, and the methods of washing clothing, especially the use of the washing machine with the function of energy conservation. Housing includes the building materials, the heating and cooling systems, the temperature control measures, and the lighting, etc. Heating and cooling times for the house by air conditioner should be reduced. Architects can do a great deal by using energy-efficient building materials and designing houses

  17. Energy conservation behavioural intention: attitudes, subjective norm and self-efficacy

    Science.gov (United States)

    Lee, J. W. C.; Tanusia, A.

    2016-08-01

    This paper examines the influence of attitude towards energy conservation at home, the attitude in the campus, subjective norm, and self-efficacy on energy conservation behavioural intention among students in a private university using the Theory of Planned Behaviour (TPB). Data was collected from about 194 students using a questionnaire developed from current literature on TPB. Data analysis using Smart PLS version 3.2.4 found that attitude towards energy conservation at home has an indirect significant influence on attitude towards energy conservation behavioural intention via the mediating effect of attitude towards energy conservation in the campus. Self-efficacy and subjective norm are also positively related to energy conservation intention. The study also indicates the suitability of the TPB in predicting behavioural intention through attitudes, subjective norms, and self-efficacy. Results suggest that energy education is vital in creating a positive attitude towards energy conservation while facilities managers in institutions need to formulate appropriate policies and regulations to inculcate the right attitude and behaviour towards energy saving.

  18. Barriers to the adoption of energy-conserving technologies in the textile industry

    Energy Technology Data Exchange (ETDEWEB)

    Evans, A.R.; Zussman, S.K.

    1979-09-01

    An overview of the textile industry and a discussion of energy-conserving technologies currently available at the pilot-demonstration stage are presented. Existing and potential barriers to the adoption of these technologies in the textile industry identified are: economic; technical acceptance; conflict between commitments of capital for compliance with environmental and health regulations and for investment in energy conservation measures; and a lack of information and technical expertise. Possible measures to eliminate barriers to the implementation of energy-conserving technologies are discussed. (MCW)

  19. Disease-Specific Care: Spine Surgery Program Development.

    Science.gov (United States)

    Koerner, Katie; Franker, Lauren; Douglas, Barbara; Medero, Edgardo; Bromeland, Jennifer

    2017-10-01

    Minimal literature exists describing the process for development of a Joint Commission comprehensive spine surgery program within a community hospital health system. Components of a comprehensive program include structured communication across care settings, preoperative education, quality outcomes tracking, and patient follow-up. Organizations obtaining disease-specific certification must have clear knowledge of the planning, time, and overall commitment, essential to developing a successful program. Health systems benefit from disease-specific certification because of their commitment to a higher standard of service. Certification standards establish a framework for organizational structure and management and provide institutions a competitive edge in the marketplace. A framework for the development of a spine surgery program is described to help guide organizations seeking disease-specific certification. In developing a comprehensive program, it is critical to define the program's mission and vision, identify key stakeholders, implement clinical practice guidelines, and evaluate program outcomes.

  20. Measuring energy conservation on Nova Scotia (NS) farms: A 2004 to 2011 comparison

    International Nuclear Information System (INIS)

    Bailey, J.A.; Duinker, P.; Amyotte, P.; Adams, M.; Khan, F.

    2016-01-01

    Many jurisdictions, including Nova Scotia (NS), have implemented policies and programs around energy. The NS government has targeted energy efficiency and more renewable energy as two main policy areas. The NS Department of Agriculture has taken initiative to provide support to implement energy conservation, energy efficiency and renewable energy opportunities in recent years but have these programs and policies been effective? A baseline energy use survey was conducted in 2005 and responses from mail surveys in 2012 (n = 273, 11.4% response rate) were used to measure the change in NS farm energy use data reported for 2004 and 2011. There have been significant reductions in energy use on NS farms. On average, NS farmers spent $8790 on energy expenses in 2011 compared to $11,228 in 2004. Adjusting for inflation, this is a 32% decrease, despite energy commodity pricing increases beyond the inflation rate. This is likely due to a decrease in energy use and a shift from gasoline use to diesel use. By the end of 2012, 36.0% of NS farmers (more than 860) had received some level of support to evaluate their energy options. This includes 410 energy audits compared to only 36 by the end of 2005. - Highlights: • Nova Scotia farmers decreased their energy costs by 32% between 2004 and 2011. • Energy reductions were likely due to decreased energy use and a shift in fuel use. • An estimated 374 NS farms had an energy audit between 2005 and 2012.

  1. Proposed energy conservation contingency plan: emergency restrictions on advertising lighting. Authorities, need, rationale, and operation

    Energy Technology Data Exchange (ETDEWEB)

    1977-04-01

    The emergency restrictions on advertising lighting proposed in Energy Conservation Contingency Plan No. 5 of 1977 are presented. A statement is given on the need for rationale and operation of the Contingency Plan.

  2. Case studies in residual use and energy conservation at wastewater treatment plants

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, D. [Science Applications International Corp., Los Altos, CA (United States)

    1995-06-01

    The US Environmental Protection Agency (EPA) and the National Renewable Energy Laboratory (NREL) for the US Department of Energy (DOE) funded a study to document energy conservation activities and their effects on operation costs, regulatory compliance, and process optimization at several wastewater treatment plants (WWTPS). The purpose of this report is to review the efforts of wastewater treatment Facilities that use residuals as fuels. Case histories are presented for facilities that have taken measures to reduce energy consumption during wastewater treatment. Most of the WWTPs discussed in this report have retrofitted existing facilities to achieve energy conservation. The case studies of energy conservation measures found no effects on the facilities` ability to comply with NPDES permits. Indeed, energy conservation activities enhance environmental compliance in several ways.

  3. Energy conservation: policy issues and end-use scenarios of savings potential

    Energy Technology Data Exchange (ETDEWEB)

    1978-09-01

    The enclosed work is based on previous research during this fiscal year, contained in Construction of Energy Conservation Scenarios: Interim Report of Work in Progress, June 1978. Five subjects were investigated and summaries were published for each subject in separate publications. This publication summarizes policy issues on the five subjects: tradeoffs of municipal solid-waste-processing alternatives (economics of garbage collection; mechanical versus home separation of recyclables); policy barriers and investment decisions in industry (methodology for identification of potential barriers to industrial energy conservation; process of industrial investment decision making); energy-efficient recreational travel (information system to promote energy-efficient recreational travel; recreational travel; national importance and individual decision making); energy-efficient buildings (causes of litigation against energy-conservation building codes; description of the building process); and end-use energy-conservation data base and scenaerios (residential; commercial; transportation; and industrial).

  4. Energy conservation: model hotel project; Conservacao de energia: projeto Hotel Modelo

    Energy Technology Data Exchange (ETDEWEB)

    Pepino, Dartes Odeniz; Sodario, Claudio Antonio [Companhia Energetica de Sao Paulo, SP (Brazil)

    1993-12-31

    This work has the objective to dimension each electrical installation of a hotel, from the load feeder circuits until the high voltage inlet, focalizing first energy conservation, according to the most updated technological terms 6 refs., 3 figs., 4 tabs.

  5. Energy conservation goals: What people adopt, what they recommend, and why

    OpenAIRE

    Shahzeen Z. Attari; David H. Krantz; Elke U. Weber

    2016-01-01

    Failures to reduce greenhouse gas emissions by adopting policies, technologies, and lifestyle changes have led the world to the brink of crisis, or likely beyond. Here we use Internet surveys to attempt to understand these failures by studying factors that affect the adoption of personal energy conservation behaviors and also endorsement of energy conservation goals proposed for others. We demonstrate an asymmetry between goals for self and others (“I’ll do the easy thing...

  6. Use of vegetation to ameliorate building microclimates: an assessment of energy-conservation potentials

    Energy Technology Data Exchange (ETDEWEB)

    Hutchison, B.A.; Taylor, F.G.; Wendt, R.L.

    1982-04-01

    The space-conditioning energy conservation potentials of landscapes designed to ameliorate building microclimates are evaluated. The physical bases for vegetative modifications of climate are discussed, and results of past study of the effects of vegetation on space-conditioning energy consumption in buildings are reviewed. The state-of-the-art of energy-conserving landscape designs is assessed and recommendations are presented for further research.

  7. Application research on big data in energy conservation and emission reduction of transportation industry

    Science.gov (United States)

    Bai, Bingdong; Chen, Jing; Wang, Mei; Yao, Jingjing

    2017-06-01

    In the context of big data age, the energy conservation and emission reduction of transportation is a natural big data industry. The planning, management, decision-making of energy conservation and emission reduction of transportation and other aspects should be supported by the analysis and forecasting of large amounts of data. Now, with the development of information technology, such as intelligent city, sensor road and so on, information collection technology in the direction of the Internet of things gradually become popular. The 3G/4G network transmission technology develop rapidly, and a large number of energy conservation and emission reduction of transportation data is growing into a series with different ways. The government not only should be able to make good use of big data to solve the problem of energy conservation and emission reduction of transportation, but also to explore and use a large amount of data behind the hidden value. Based on the analysis of the basic characteristics and application technology of energy conservation and emission reduction of transportation data, this paper carries out its application research in energy conservation and emission reduction of transportation industry, so as to provide theoretical basis and reference value for low carbon management.

  8. Energy conservation potential in China’s petroleum refining industry: Evidence and policy implications

    International Nuclear Information System (INIS)

    Lin, Boqiang; Xie, Xuan

    2015-01-01

    Highlights: • A long-term equilibrium relationship of energy demand in China’s petroleum refining industry is established. • The sectoral energy conservation potential is evaluated by using scenarios analysis. • Energy prices, enterprise scale, R and D investment and ownership structure affect electricity intensity. • Future policy for energy conservation in China’s petroleum refining industry is suggested. - Abstract: China is currently the second largest petroleum refining country in the world due to rapid growth in recent years. Because the petroleum refining industry is energy-intensive, the rapid growth in petroleum refining and development caused massive energy consumption. China’s urbanization process will guarantee sustained growth of the industry for a long time. Therefore, it is necessary to study the energy conservation potential of the petroleum industry. This paper estimates the energy conservation potential of the industry by applying a cointegration model to investigate the long-run equilibrium relationship between energy consumption and some factors such as energy price, enterprise scale, R and D investment and ownership structure. The results show that R and D investment has the greatest reduction impact on energy intensity, and the growth of market participants (i.e. the decline of the share of state-owned companies) can improve energy efficiency of this industry. Under the advanced energy-saving scenario, the accumulated energy conservation potential will reach 230.18 million tons of coal equivalent (tce). Finally, we provide some targeted policy recommendations for industrial energy conservation

  9. A review of energy conservation initiatives by the Government of India

    International Nuclear Information System (INIS)

    Nandi, Paritosh; Basu, Sujay

    2008-01-01

    Energy conservation is the need of the hour. The first oil shock of 1973 shook up the industrialized nations of the world and awakened them from the sleepy complacency of never-ending oil flow. It made them face the stark reality of the uncertainty in oil supply restoration and the fragility of the trade in oil. This was the time when many countries realized the urgent need for energy conservation. Notably, the wave of energy conservation had struck the Indian intelligentia 3 years earlier when a Fuel Policy Committee was set up by the Government of India in 1970, which finally bore fruits three decades hence in the form of enactment of the much awaited Energy Conservation Act, 2001 by the Government of India. This Act made provisions for setting up of the Bureau of Energy Efficiency, a body corporate incorporated under the Act, for supervising and monitoring the efforts on energy conservation in India. In this article the stages in the historical development of Energy Conservation in India, the Government initiatives taken in this regard and the reasons for the limited success in implementation of conservation policies in the past have been discussed. (author)

  10. Norway encourages energy conservation in Serbia; Norge fremmer ENOEK i Serbia

    Energy Technology Data Exchange (ETDEWEB)

    Lind, Oddvar

    2003-07-01

    There is a great potential in Serbia for energy conservation and new technology after years of war. In practice, Serbia has lost 10 - 15 years and much must be rebuilt from the ground. Norway is working with Serbia to develop Serb know-how in the field of energy conservation. This involves consultative advice to the energy department in Belgrade for the development of a new energy act and the preparation of an energy report to the parliamentary assembly. There is also cooperation with the universities in order to establish four regional centres for energy conservation, and with several industrial companies to develop and implement definite investment projects. In Norway, several models for local energy conservation centres have been tried out during the last 20 years. These centres used to be financed by a mark-up on the electric tariff and they offered subsidized energy conservation counselling to the energy consumers. However, this did not work out well and the centres were removed from the electricity companies and now have to compete with other consultants to deliver the demanded services to the industries and private consumers. This false step will not be repeated in Serbia, where the energy conservation centres will be independent, commercial centres from the beginning. In developing this system, experience is drawn upon from Norwegian projects in many of the major cities in North-Western Russia.

  11. Closing the Gap Between Specification and Programming: VDM++ and SCALA

    Science.gov (United States)

    Havelund, Klaus

    2011-01-01

    We argue that a modern programming language such as Scala offers a level of succinctness, which makes it suitable for program and systems specification as well as for high-level programming. We illustrate this by comparing the language with the Vdm++ specification language. The comparison also identifies areas where Scala perhaps could be improved, inspired by Vdm++. We furthermore illustrate Scala's potential as a specification language by augmenting it with a combination of parameterized state machines and temporal logic, defined as a library, thereby forming an expressive but simple runtime verification framework.

  12. Integrated technology selection for energy conservation and PAHs control in iron and steel industry: Methodology and case study

    International Nuclear Information System (INIS)

    Li, Li; Lu, Yonglong; Shi, Yajuan; Wang, Tieyu; Luo, Wei; Gosens, Jorrit; Chen, Peng; Li, Haiqian

    2013-01-01

    Energy conservation and PAHs (polycyclic aromatic hydrocarbon) control are two challenges for the iron and steel industry, especially where the industry has developed at high speed. How to select appropriate technologies to improve energy efficiency and control pollution from PAHs simultaneously is encountered by both the researchers and the decision makers. This study sets up a framework on technology selection and combination which integrates technology assessment, multiple objective programming and scenario analysis. It can predict proper technology combination for different emission controls, energy conservation targets and desired levels of production. An iron and steel factory in Southwestern China is cited as a case. It is shown that stricter PAHs control will drive the transformation from process control technology to alternative smelting technology. In low PAHs limit, 25% energy reduction is a threshold. Before inclusion of a restraint on energy consumption at 25% reduction, PAHs emission is the key limiting factor for the technology selection; while after inclusion of this restraint, energy consumption becomes the key limiting factor. The desired level of production will also influence the technology selection. This study can help decision makers to select appropriate technologies to meet the PAHs control objectives and energy conservation strategies in energy-intensive industries. - Highlights: ► We predict technical strategy for energy and PAHs reduction in iron and steel mill. ► With low PAHs control objectives, process control technologies are preferable. ► With medium and high PAHs control goals, alternative smelting technology is dominate. ► In low PAHs control objective, 25% energy reduction is a threshold

  13. Major models and data sources for residential and commercial sector energy conservation analysis. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-01

    Major models and data sources are reviewed that can be used for energy-conservation analysis in the residential and commercial sectors to provide an introduction to the information that can or is available to DOE in order to further its efforts in analyzing and quantifying their policy and program requirements. Models and data sources examined in the residential sector are: ORNL Residential Energy Model; BECOM; NEPOOL; MATH/CHRDS; NIECS; Energy Consumption Data Base: Household Sector; Patterns of Energy Use by Electrical Appliances Data Base; Annual Housing Survey; 1970 Census of Housing; AIA Research Corporation Data Base; RECS; Solar Market Development Model; and ORNL Buildings Energy Use Data Book. Models and data sources examined in the commercial sector are: ORNL Commercial Sector Model of Energy Demand; BECOM; NEPOOL; Energy Consumption Data Base: Commercial Sector; F.W. Dodge Data Base; NFIB Energy Report for Small Businesses; ADL Commercial Sector Energy Use Data Base; AIA Research Corporation Data Base; Nonresidential Buildings Surveys of Energy Consumption; General Electric Co: Commercial Sector Data Base; The BOMA Commercial Sector Data Base; The Tishman-Syska and Hennessy Data Base; The NEMA Commercial Sector Data Base; ORNL Buildings Energy Use Data Book; and Solar Market Development Model. Purpose; basis for model structure; policy variables and parameters; level of regional, sectoral, and fuels detail; outputs; input requirements; sources of data; computer accessibility and requirements; and a bibliography are provided for each model and data source.

  14. Private behaviors for the public good: Citizens' actions and U.S. energy conservation

    Science.gov (United States)

    Bolsen, Toby

    Why and when do individuals take political actions? Why do some, but not all, citizens make sacrifices for the sake of the public good? Outside of work on participation, political scientists have paid little attention to these questions. I seek to fill this gap by exploring the factors that drive political behaviors. I focus specifically on an important class of behaviors: actions regarding the consumption of energy. I begin by developing a theory that brings together the potentially interactive effects of individual and environmental factors that shape individuals' decisions to take action. I test predictions generated by my theory in three empirical chapters: a media content analysis, laboratory experiment, and survey experiment. The content analysis allows me to assess frames in a communication toward energy consumption, which I examine later in terms of effects. I use the theory and experiments to evaluate the impact of competing forces on attitudes toward energy conservation, willingness to pay for energy saving devices, and actual behavior (e.g., a purchasing decision and financial contribution). My results suggest a primacy of norms, which is fascinating because the impact of norms is under-studied relative to research evaluating the impact of political communications.

  15. Energy conservation and pomeron loops in high energy evolution

    International Nuclear Information System (INIS)

    Gustafson, Goesta

    2007-01-01

    We present a formalism which modifies the Mueller Dipole Model such that it incorporates energy-momentum conservation as well as important colour suppressed effects in the cascade evolution. The formalism is implemented in a Monte Carlo simulation program, and the results are compared to inclusive data from HERA and the Tevatron. We here find a generally very good agreement between our model and the experimental data. (author)

  16. Assessment of Energy Conservation in Egypt's Electric System

    Directory of Open Access Journals (Sweden)

    Azhar El Saeed Awad Abou Ghoniem

    2017-03-01

    Full Text Available This paper provides an evaluation of energy saving policy as a key factor in Egypt's electric system in terms of benefits, invested cost, power quality and environmental impact, solutions have been made by system planners and decision makers aiming to face the challenges that being encountered by the electric system such as scarce and precious of prime energies are compared in terms of invested cost, implementation time and advantages for both of power providers and end users w.r.to energy savings. A case study that implemented in a pilot program for energy savings was given. It is a group of facilities include industrial, commercial, administrative companies and worship houses, they are connected to Alexandria electrical distribution network, they are classified as big customers, i.e. contracted power for each is higher than 0.5 mega watt, the goals of the program were evaluating potentials of energy saving opportunities in the system and estimating the outcomes. Options were evaluated with regard to savings in electricity, fuels and water. Cost of investments and pay back periods were calculated. Environmental impact as a result of saving in emitted green house gas co2 is determined. Potentials of energy savings are analyzed and benefits to both electric utilities and end users were assessed.

  17. Potential environmental effects of energy conservation measures in northwest industries

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, M C; Gygi, K F; Hendrickson, P L

    1992-01-01

    The Bonneville Power Administration (Bonneville) has identified 101 plants in the Pacific Northwest that account for 80% of the region's industrial electricity consumption. These plants offer a precise target for a conservation program. PNL determined that most of these 101 plants were represented by 11 major industries. We then reviewed 36 major conservation technologies used in these 11 industrial settings to determine their potential environmental impacts. Energy efficiency technologies designed for industrial use may result in direct or indirect environmental impacts. Effects may result from the production of the conservation measure technology, changes in the working environment due to different energy and material requirements, or changes to waste streams. Industry type, work-place conditions, worker training, and environmental conditions inside and outside the plant are all key variables that may affect environmental outcomes. To address these issues this report has three objectives: Describe potential conservation measures that Bonneville may employ in industrial programs and discuss potential primary impacts. Characterize industrial systems and processes where the measure may be employed and describe general environmental issues associated with each industry type. Review environmental permitting, licensing, and other regulatory actions required for industries and summarize the type of information available from these sources for further analysis.

  18. Energy conservation in the pulp and paper industry. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-05-01

    Almost 40 specific research and development ideas were formulated by the 67 participants at this workshop. Projects were assessed with the following criteria in mind: potential energy savings, cost, risk, Federal role, time frame, and priority. Data are tabulated on the projects followed by six topics discussed by panel members: waste and recycling, energy management in the mill, papermaking, pulping and bleaching, power generation in the mill, and coating and conversion. Three summary speeches are included. (MCW)

  19. Feasibility study on energy conservation at Sao Paulo state primary schools in the Federative Republic of Brazil

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    A feasibility study has been performed on the energy conservation project aimed at the future CDM in relation with energy consumption in the lighting equipment at the Sao Paulo state primary schools in the Federative Republic of Brazil. Out of about 5,500 primary schools existing in Sao Paulo, 3,414 schools were selected as the objects of the surveys and discussions. The present program intends to introduce energy saving facilities such as high-efficiency fluorescent lamps and controls for illuminating the primary schools to save the energies and reduce emission of the global warming gases. In this economy project, the owners do not need to make initial investments, wherein the required funds are taken care by conservation of electric power during the service contract period. If about 3,000 schools are selected as the object, a fund of about 2.3 billion yen will be required in total. Total energy conservation quantity during 15 years from 2002 to 2016 as achieved by this project will be 532,740 MWh, corresponding to 114,540 tons of crude oil. The effect of reducing the emission of global warming gases will be 110,949 t-CO2 during the same period of time. (NEDO)

  20. Targeting water and energy conservation using big data

    Science.gov (United States)

    Escriva-Bou, A.; Pulido-Velazquez, M.; Lund, J. R.

    2016-12-01

    Water conservation is often the most cost effective source of additional water supply for water stressed regions to maintain supply reliability with increasing population and/or demands, or shorter-term droughts. In previous research we demonstrated how including energy savings of conserved water can increase willingness to adopt conservation measures, at the same time that increases energy and GHG emissions savings. But the capacity to save water, energy and GHG emissions depends fundamentally in the economic benefits for customers and utilities. Utilities have traditionally used rebates, subsidies or incentives to enhance water conservation. But the economic benefits originated by these rebates depend on the actual savings of the water, energy and GHG emissions. A crucial issue that is not considered in the financial analysis of these rebates is the heterogeneity in water consumption, resulting in rebating households that actually do not need improvements in certain appliances. Smart meters with end-use disaggregation allow to consider this heterogeneity and to target rebates. By using an optimization approach that minimizes water and energy residential costs—accounting for retrofit costs and individual benefits according to previous levels of consumption—we are able to assess economically optimal rebate programs both for customers and utilities. Three programs are considered: first, same economic incentives are provided to all households and then they do their optimal decisions; second, traditional appliance-focused rebates are assessed; and third, utilities provide only rebates to those households that maximize water, energy or GHG emissions savings. Results show that the most economically efficient options for households are not the best options for utilities, and that traditional appliance-focused rebates are much less optimal than targeted rebates.

  1. Energy conservation and environmental protection policy in Poland under conditions of transition

    International Nuclear Information System (INIS)

    Kapala, J.

    2000-01-01

    Based on experience and many years of research in the field of energy use, ways of solving methodological problems of energy conservation and environmental protection in Poland have been proposed. These problems were examined as related to the conditions of centrally-planned to market economy, with due considerations for experience of highly developed countries. The paper also presents criteria and functions for qualification of the results of energy conservation and environment protection. It emphasises the importance of direct economical criteria and non-economical criteria when solving ecology-related problems. In this stage the proposals outlined in the paper have only a theoretical character. They could be developed further as the results of the research work in the field of energy conservation and ambient media (air, water, soil) protection are brought to a common denominator. (author)

  2. Problems in the implementation of energy conservation methods: the industrial view

    Energy Technology Data Exchange (ETDEWEB)

    Broad, C.W.

    1977-10-15

    It is pointed out that New Zealand industry has been identified as putting little effort into energy conservation. An energy conservation campaign in industry to increase efficiency and reduce wastage could have major benefits for New Zealand as a whole. Little progress in implementing energy conservation techniques in industry is apparent at present. Business decisions are in the main motivated by profits. Because of the low place of energy in industry's costs of production, seen as a single factor, it hardly rates greater priority over other established production costs. A need to integrate energy costs and material costs is apparent. The need for education is obvious, now, with cheap and limitless energy no longer existing.

  3. Problems in the implementation of energy conservation methods: the industrial view

    Energy Technology Data Exchange (ETDEWEB)

    Broad, C. W.

    1977-10-15

    It is pointed out that New Zealand industry has been identified as putting little effort into energy conservation. An energy conservation campaign in industry to increase efficiency and reduce wastage could have major benefits for New Zealand as a whole. Little progress in implementing energy conservation techniques in industry is apparent at present. Business decisions are in the main motivated by profits. Because of the low place of energy in industry's costs of production, seen as a single factor, it hardly rates greater priority over other established production costs. A need to integrate energy costs and material costs is apparent. The need for education is obvious, now, with cheap and limitless energy no longer existing.

  4. Methods and technologies of energy conservation in trade business

    Energy Technology Data Exchange (ETDEWEB)

    Kalveram, G

    1983-10-01

    Proposals to devise a structure of energy consumers in the Federal Republic of Germany mostly make use of the following division: industry, transport, and households, small consumers and other consumers. The third consumer group, which is supposed to include also trading businesses, accounts for approximately 44% of the total energy consumption. The remaining 56% are consumed by the industry (39%) and transport (17%). The level of energy consumption and energy cost in the trade is determined by a multitude of factors specific to the enterprise, such as for instance the geographic position of the undertaking, i.e. differing climatic conditions, opening times, condition of the buildings and technical equipment. In spite of this, considerable amounts can be saved if the energy sources respectively the aggregates powered with them are used carefully and economically and if the most recent energy-saving technologies are taken into account.

  5. Review of studies of research opportunities in energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Hane, G.J.; Williams, T.A.; Hauser, S.G.

    1984-04-01

    This study attempted to systematically identify, screen and review many of the 27 remaining major studies across the end-use areas. The method used to identify and review the studies, the scope of this effort, the types of studies reviewed, and the R and D opportunities identified are discussed. The actual report reviews are included. The review format and the kinds of information sought from each report are discussed. The general categories of the material are described; the types of information presented are summarized; and gaps in the literature are discussed. A discussion of R and D needs and comments of the specific needs presented and their temporal and evolutionary characteristics are included. The findings of the review are summarized and the researchers contacted for information are listed.

  6. Business cycle and economic-wide energy intensity: The implications for energy conservation policy in Algeria

    International Nuclear Information System (INIS)

    Adom, Philip Kofi

    2015-01-01

    Despite the prevalence of voluntary and involuntary energy conservation policies, developing countries in Africa continue to struggle to achieve energy efficiency targets. Consequently, energy intensity levels have risen threatening the security of the energy system. This raises the important question: is there an economic state that induces agents to be energy conscious? In this study, we study the case of Algeria's energy intensity from 1971 to 2010. First, the paper argues that there is a certain economic state that economic agents find investing in energy conservation a viable option. Any state different from that would mean not investing in energy conservation. Second, the paper argues that the economy can do better even with an infinitesimal reduction in fuel subsidy, and that the gains in revenue from the policy can compensate for the negative socio-economic and equity impacts associated with such a policy. Third, the paper argues that, so long as, industrial expansion in the country move parallel with investment in technological innovation, long-term sustainable growth and energy conservation targets are jointly feasible. Fourth, the paper shows that income elasticity evolves with the business cycle, and the absorptive capability of the host country affects how FDI (foreign direct inflows) impact energy intensity. - Highlights: • Low income states inhibit fuel substitution and investment in energy conservation. • Income elasticity evolves as we pass through boom and recessionary periods. • The goals of sustainable growth and energy conservation are not mutually exclusive. • Absorptive capability affects the impact of FDI on energy intensity

  7. Recommendations for energy conservation standards for new residential buildings - volume 3: Introduction and Background to the Standard Development Effort

    Energy Technology Data Exchange (ETDEWEB)

    1989-05-01

    The Energy Conservation for New Buildings Act of 1976, as amended, 42 U.S.C Section 6831 et. seq. requires the US Department of Energy to issue energy conservation standards for the design of new residential and commercial buildings. The standards will be mandatory only for the design of new federal buildings, and will serve as voluntary guidelines for the design of new non-federal buildings. This report documents the development and testing of a set of recommendations, from the American Society of Heating, Refrigeration and Air Conditioning Engineers, Inc. (ASHRAE) Special Projects Committee No. 53, designed to provide the technical foundation for the Congressionally-mandated energy standard for new residential buildings. The recommendations have been developed over the past 25 months by a multidisciplinary project team, under the management of the US Department of Energy and its prime contractor, Pacific Northwest Laboratory. Volume III -- Introduction and Background to the Standard Development Effort is a description of the Standard development process and contains the rationale for the general approach and specific criteria contained within the recommendations.

  8. Energy conservation in mechanical industry; Maitrise de l`energie dans les industries mecaniques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The workshop is composed of 12 communications on the theme of energy consumption, conservation and management in industry, and more especially in metal industry: evaluation of the energy savings potential in the French industry; official energy diagnosis procedure in buildings; the French national gas utility policy for energy conservation and economical performance in industry; energy conservation with speed variators for electric motors; energy audits and energy metering for conservation objectives. Examples of energy efficient systems or energy audits in various industrial sectors (compressed air, industrial buildings, heat treatments, curing...) are also presented. The electric power quality EDF`s contract is also discussed

  9. Evaluation of selected near-term energy-conservation options for the Midwest

    Energy Technology Data Exchange (ETDEWEB)

    Evans, A.R.; Colsher, C.S.; Hamilton, R.W.; Buehring, W.A.

    1978-11-01

    This report evaluates the potential for implementation of near-term energy-conservation practices for the residential, commercial, agricultural, industrial, transportation, and utility sectors of the economy in twelve states: Illinois, Indiana, Iowa, Kansas, Michigan, Minnesota, Missouri, Nebraska, North Dakota, Ohio, South Dakota, and Wisconsin. The information used to evaluate the magnitude of achievable energy savings includes regional energy use, the regulatory/legislative climate relating to energy conservation, technical characteristics of the measures, and their feasibility of implementation. This work is intended to provide baseline information for an ongoing regional assessment of energy and environmental impacts in the Midwest. 80 references.

  10. ORGANIZATIONAL AND ECONOMIC BASES OF ENERGY CONSERVATION IN AGRICULTURE

    Directory of Open Access Journals (Sweden)

    N. Lisjutchenko

    2012-04-01

    Full Text Available Russian agricultural production at current stage is very energy intensive. At the cost of agricultural production overall cost of energy resources is growing: in 2000 was 36.5 billion rubles, 2008 - 92 billion rubles, 2009 - 110.6 billion rubles, and in 2010 rose to 119.8 billion rubles, or increased by 3.3 times. The analysis of consumption of the main energy sources for the period from 1990 to 2010 showed a decrease in general and the specific consumption of diesel fuel, gasoline and electricity by 5-7 times. Reducing energy consumption is explained as a forced saving resources because of lack of funds for the acquisition and implementation of agricultural enterprises of energy and resource saving measures (resource-saving technologies in the production process, motor fuel, biofuels and alternative energy sources. To solve this problem State and business in a matter of priority should be to build an effective system of innovation development for agriculture, promote the participation of agricultural science and education system in this process, modernize the domestic agricultural machinery, engineering and technology infrastructure.

  11. Risk-based technical specifications program: Site interview results

    International Nuclear Information System (INIS)

    Andre, G.R.; Baker, A.J.; Johnson, R.L.

    1991-08-01

    The Electric Power Research Institute and Pacific Gas and Electric Company are sponsoring a program directed at improving Technical Specifications using risk-based methods. The major objectives of the program are to develop risk-based approaches to improve Technical Specifications and to develop an Interactive Risk Advisor (IRA) prototype. The IRA is envisioned as an interactive system that is available to plant personnel to assist in controlling plant operation. Use of an IRA is viewed as a method to improve plant availability while maintaining or improving plant safety. In support of the program, interviews were conducted at several PWR and BWR plant sites, to elicit opinions and information concerning risk-based approaches to Technical Specifications and IRA requirements. This report presents the results of these interviews, including the functional requirements of an IRA. 2 refs., 6 figs., 2 tabs

  12. Fiscal 1999 technical survey report. Cooperative project on energy conservation seminar; 1999 nendo sho energy seminar kyoryoku jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    NEDO (New Energy and Industrial Technology Development Organization), from the viewpoint that the development and popularization of energy conservation technologies are extremely important as energy conservation measures, collected energy related primary information from 12 Asian countries including Japan for the development and popularization of energy conservation technologies, and has constructed a database NEDO/DB. NEDO is now propelling forward its efforts to popularize the database. For popularizing NEDO/DB in Vietnam and for rendering the people conscious of energy conservation, NEDO dispatched some lecturers to an energy conservation seminar sponsored by the Vietnamese Government. The importance of energy conservation promoting measures was highlighted at the seminar. NEDO's approach to AIJ (activities implemented jointly) and CDM (clean development mechanism) was described at the seminar, and a lecture meeting was held to explain NEDO/DB and to teach how to use the database. (NEDO)

  13. The normative feedback approach for energy conservation behavior in the military community

    International Nuclear Information System (INIS)

    Shen, Meng; Young, Robert; Cui, Qingbin

    2016-01-01

    In the field of energy conservation programs, the behavior-based method, especially the normative feedback approach, has emerged as a cost-effective solution for energy savings. However it remains doubtful whether normative feedback would generate significant energy savings in absence of financial accountability and whether the normative feedback is influenced by the proximity of the comparison groups. Here we test various normative feedback approaches at the Joint Base Andrews in Maryland, with an objective of understanding this approach. We show that the normative feedback approach can lead to 3.4% energy savings, even when residents are not billed for their electricity usage. Through an analysis of covariance, this paper evaluates the effects of different proximities of comparison and concludes that a street-level comparison level can generate the highest energy savings of 5.4%. Furthermore, this paper also explores and defines the relationship between electricity savings and physical variables including home size, unit type, neighborhood, and the variation of cooling degree days. The study contributes to the understanding of how to realizing the full potential of normative feedback approach in energy savings. - Highlights: • Normative feedback leads to 3.4% energy savings even without financial incentives. • The study identifies the mere-exposure effect of normative feedback approach. • The street-level comparison doubles the energy savings compared to other levels. • Optimal normative feedback for energy saving should be compared at street-level. • Medium-sized homes in experiment show the greatest potential for energy savings.

  14. Management of Virtual Machine as an Energy Conservation in Private Cloud Computing System

    Directory of Open Access Journals (Sweden)

    Fauzi Akhmad

    2016-01-01

    Full Text Available Cloud computing is a service model that is packaged in a base computing resources that can be accessed through the Internet on demand and placed in the data center. Data center architecture in cloud computing environments are heterogeneous and distributed, composed of a cluster of network servers with different capacity computing resources in different physical servers. The problems on the demand and availability of cloud services can be solved by fluctuating data center cloud through abstraction with virtualization technology. Virtual machine (VM is a representation of the availability of computing resources that can be dynamically allocated and reallocated on demand. In this study the consolidation of VM as energy conservation in Private Cloud Computing Systems with the target of process optimization selection policy and migration of the VM on the procedure consolidation. VM environment cloud data center to consider hosting a type of service a particular application at the instance VM requires a different level of computing resources. The results of the use of computing resources on a VM that is not balanced in physical servers can be reduced by using a live VM migration to achieve workload balancing. A practical approach used in developing OpenStack-based cloud computing environment by integrating Cloud VM and VM Placement selection procedure using OpenStack Neat VM consolidation. Following the value of CPU Time used as a fill to get the average value in MHz CPU utilization within a specific time period. The average value of a VM’s CPU utilization in getting from the current CPU_time reduced by CPU_time from the previous data retrieval multiplied by the maximum frequency of the CPU. The calculation result is divided by the making time CPU_time when it is reduced to the previous taking time CPU_time multiplied by milliseconds.

  15. Golden Eagle Monitoring Plan for the Desert Renewable Energy Conservation Plan

    Science.gov (United States)

    Wiens, David; Kolar, Patrick; Katzner, Todd

    2018-01-01

    This report describes options for monitoring the status and population trends of the golden eagle (Aquila chrysaetos) within the Desert Renewable Energy Conservation Plan (DRECP) area of Southern California in maintaining stable or increasing population in the planning area. The report profiles the ecology of golden eagles in the region and provides a range of potential sampling options to address monitoring needs and objectives. This approach also focused on links between changes in human land-use, golden eagle nesting and foraging habitat conditions, and population dynamics. The report outlines how monitoring data from demographic, prey, and habitat studies were used to develop a predictive demographic model for golden eagles in the DRECP area. Results from the model simulations suggest increases in renewable energy development could have negative consequences for population trajectories. Results also suggest site-specific conservation actions could reduce the magnitude of negative impacts to the local population of eagles. A monitoring framework is proposed including: (1) annual assessments of site-occupancy and reproduction by territorial pairs of golden eagles (including rates at which sites become colonized or vacated over time); (2) estimates of survival, movements, and intensity of use of landscapes by breeding and non-breeding golden eagles; (3) periodic (conducted every two to four years) assessments of nesting and foraging habitats, prey populations, and associations with land-use and management activities; and (4) updating the predictive demographic model with new information obtained on eagles and associated population stressors. The results of this research were published in the Journal of Rapture Research, Wiens, David,Inman, Rich D., Esque, Todd C., Longshore, Kathleen M. and Nussear, Kenneth (2017). Spatial Demographic Models to Inform Conservation Planning of Golden Eagles in Renewable Energy Landscapes. 51(3):234-257.

  16. Low Energy Technology. A Unit of Instruction on Energy Conservation in Field Crop Production.

    Science.gov (United States)

    Davis, George; Scanlon, Dennis C.

    This unit of instruction on energy conservation in field crop production was designed for use by agribusiness and natural resources teachers in Florida high schools and by agricultural extension agents as they work with adults and students. It is one of a series of 11 instructional units (see note) written to help teachers and agents to educate…

  17. Low effectiveness of the energy conservation policy in the horticulture in the Netherlands

    International Nuclear Information System (INIS)

    Van Roozendaal, P.J.A.J.

    2003-01-01

    Between December 2000 and June 2002 the Netherlands Court of Audit ('Algemene Rekenkamer') carried out a study on the title subject, focusing on the effect of energy saving measures on the energy consumption per product unit in the greenhouse sector in the Netherlands for the period 1994-2000, including the effect of the energy conservation policy for the period 1997-1999 [nl

  18. A Survey on Energy Conserving Mechanisms for the Internet of Things: Wireless Networking Aspects

    Science.gov (United States)

    Abbas, Zeeshan; Yoon, Wonyong

    2015-01-01

    The Internet of Things (IoT) is an emerging key technology for future industries and everyday lives of people, where a myriad of battery operated sensors, actuators, and smart objects are connected to the Internet to provide services such as mobile healthcare, intelligent transport system, environmental monitoring, etc. Since energy efficiency is of utmost importance to these battery constrained IoT devices, IoT-related standards and research works have focused on the device energy conserving issues. This paper presents a comprehensive survey on energy conserving issues and solutions in using diverse wireless radio access technologies for IoT connectivity, e.g., the 3rd Generation Partnership Project (3GPP) machine type communications, IEEE 802.11ah, Bluetooth Low Energy (BLE), and Z-Wave. We look into the literature in broad areas of standardization, academic research, and industry development, and structurally summarize the energy conserving solutions based on several technical criteria. We also propose future research directions regarding energy conserving issues in wireless networking-based IoT. PMID:26404275

  19. A Survey on Energy Conserving Mechanisms for the Internet of Things: Wireless Networking Aspects

    Directory of Open Access Journals (Sweden)

    Zeeshan Abbas

    2015-09-01

    Full Text Available The Internet of Things (IoT is an emerging key technology for future industries and everyday lives of people, where a myriad of battery operated sensors, actuators, and smart objects are connected to the Internet to provide services such as mobile healthcare, intelligent transport system, environmental monitoring, etc. Since energy efficiency is of utmost importance to these battery constrained IoT devices, IoT-related standards and research works have focused on the device energy conserving issues. This paper presents a comprehensive survey on energy conserving issues and solutions in using diverse wireless radio access technologies for IoT connectivity, e.g., the 3rd Generation Partnership Project (3GPP machine type communications, IEEE 802.11ah, Bluetooth Low Energy (BLE, and Z-Wave. We look into the literature in broad areas of standardization, academic research, and industry development, and structurally summarize the energy conserving solutions based on several technical criteria. We also propose future research directions regarding energy conserving issues in wireless networking-based IoT.

  20. Energy conservation and sustainable economic growth: The case of Latin America and the Caribbean

    International Nuclear Information System (INIS)

    Chang, Ching-Chih; Soruco Carballo, Claudia Fabiola

    2011-01-01

    This study examines the causal relationships among energy consumption, economic growth and carbon dioxide emissions in twenty countries from Latin America and the Caribbean region. The methodology includes the use of Phillips and Perron (PP) tests, a cointegration model with vector error correction modeling (VECM) and vector autoregression (VAR) with Granger causality. The study concludes that of the twenty countries analyzed, only in four of them will it be possible to implement energy conservation polices without affecting their economic growth, four others are not able to consider an energy conservation policy with economic growth, and the other twelve should focus on their economic growth before adopting any conservation policies. Energy efficiency was found in this region, especially in the countries which have both cointegration and short-term equilibrium. - Highlights: → Only four countries could implement energy conservation polices without affecting economic growth. → Twelve nations should focus on their economic growth before designing any energy conservation policies. → Energy efficiency was found in the countries which have both cointegration and short-term equilibrium.

  1. A Survey on Energy Conserving Mechanisms for the Internet of Things: Wireless Networking Aspects.

    Science.gov (United States)

    Abbas, Zeeshan; Yoon, Wonyong

    2015-09-25

    The Internet of Things (IoT) is an emerging key technology for future industries and everyday lives of people, where a myriad of battery operated sensors, actuators, and smart objects are connected to the Internet to provide services such as mobile healthcare, intelligent transport system, environmental monitoring, etc. Since energy efficiency is of utmost importance to these battery constrained IoT devices, IoT-related standards and research works have focused on the device energy conserving issues. This paper presents a comprehensive survey on energy conserving issues and solutions in using diverse wireless radio access technologies for IoT connectivity, e.g., the 3rd Generation Partnership Project (3GPP) machine type communications, IEEE 802.11ah, Bluetooth Low Energy (BLE), and Z-Wave. We look into the literature in broad areas of standardization, academic research, and industry development, and structurally summarize the energy conserving solutions based on several technical criteria. We also propose future research directions regarding energy conserving issues in wireless networking-based IoT.

  2. 77 FR 40530 - Energy Conservation Standards for Residential Furnace Fans: Public Meeting and Availability of...

    Science.gov (United States)

    2012-07-10

    ... heating, ventilation, and air-conditioning (HVAC) systems for the purpose of circulating air through duct... INFORMATION: Table of Contents I. Authority II. History of Energy Conservation Standards Rulemaking for... circulating air through duct work, hereinafter referred to as ``residential furnace fans'' or simply ``furnace...

  3. Energy conservation through behavioral change : Examining the effectiveness of a tailor-made approach

    NARCIS (Netherlands)

    Abrahamse, Wokje

    2007-01-01

    Households constitute an important target group when it comes to encouraging energy conservation. This dissertation provides an overview of the effectiveness of interventions aimed at encouraging households to reduce their energy use through behavioral changes. It also provides more insight into the

  4. What is the optimum social marketing mix to market energy conservation behaviour: an empirical study.

    Science.gov (United States)

    Sheau-Ting, Low; Mohammed, Abdul Hakim; Weng-Wai, Choong

    2013-12-15

    This study attempts to identify the optimum social marketing mix for marketing energy conservation behaviour to students in Malaysian universities. A total of 2000 students from 5 major Malaysian universities were invited to provide their preferred social marketing mix. A choice-based conjoint analysis identified a mix of five social marketing attributes to promote energy conservation behaviour; the mix is comprised of the attributes of Product, Price, Place, Promotion, and Post-purchase Maintenance. Each attribute of the mix is associated with a list of strategies. The Product and Post-purchase Maintenance attributes were identified by students as the highest priority attributes in the social marketing mix for energy conservation behaviour marketing, with shares of 27.12% and 27.02%, respectively. The least preferred attribute in the mix is Promotion, with a share of 11.59%. This study proposes an optimal social marketing mix to university management when making decisions about marketing energy conservation behaviour to students, who are the primary energy consumers in the campus. Additionally, this study will assist university management to efficiently allocate scarce resources in fulfilling its social responsibility and to overcome marketing shortcomings by selecting the right marketing mix. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. 77 FR 32916 - Energy Conservation Standards for Distribution Transformers: Public Meeting and Availability of...

    Science.gov (United States)

    2012-06-04

    ...-2010-BT-STD-0048] RIN 1904-AC04 Energy Conservation Standards for Distribution Transformers: Public... information that it is making available about the liquid-immersed distribution transformer equipment classes... equipment classes for several different types of liquid-immersed distribution transformers. In addition to...

  6. Compatible, energy conserving, bounds preserving remap of hydrodynamic fields for an extended ALE scheme

    Science.gov (United States)

    Burton, D. E.; Morgan, N. R.; Charest, M. R. J.; Kenamond, M. A.; Fung, J.

    2018-02-01

    From the very origins of numerical hydrodynamics in the Lagrangian work of von Neumann and Richtmyer [83], the issue of total energy conservation as well as entropy production has been problematic. Because of well known problems with mesh deformation, Lagrangian schemes have evolved into Arbitrary Lagrangian-Eulerian (ALE) methods [39] that combine the best properties of Lagrangian and Eulerian methods. Energy issues have persisted for this class of methods. We believe that fundamental issues of energy conservation and entropy production in ALE require further examination. The context of the paper is an ALE scheme that is extended in the sense that it permits cyclic or periodic remap of data between grids of the same or differing connectivity. The principal design goals for a remap method then consist of total energy conservation, bounded internal energy, and compatibility of kinetic energy and momentum. We also have secondary objectives of limiting velocity and stress in a non-directional manner, keeping primitive variables monotone, and providing a higher than second order reconstruction of remapped variables. In particular, the new contributions fall into three categories associated with: energy conservation and entropy production, reconstruction and bounds preservation of scalar and tensor fields, and conservative remap of nonlinear fields. The paper presents a derivation of the methods, details of implementation, and numerical results for a number of test problems. The methods requires volume integration of polynomial functions in polytopal cells with planar facets, and the requisite expressions are derived for arbitrary order.

  7. Applying the Theory of Planned Behavior in Predicting Proenvironmental Behaviour: The Case of Energy Conservation

    Directory of Open Access Journals (Sweden)

    Octav-Ionuţ Macovei

    2015-08-01

    Full Text Available This paper aims to propose and validate a model based on the Theory of Planned Behavior in order to explain consumers’ pro-environmental behaviour regarding energy conservation. The model was constructed using the five variables from Ajzen’s Theory of Planned Behavior (TPB (behaviour, intention, perceived behavioural control, subjective norms and attitude to which a variable adapted from Schwartz’s Norm Activation Theory (NAT was added (“awareness of the consequences and the need” in order to create a unique model adapted for the special case of energy conservation behaviour. Further, a survey was conducted and the data collected were analysed using structural equation modelling. The first step of data analysis confirmed that all the constructs have good reliability, internal consistency and validity. The results of the structural equation analysis validated the proposed model, with all the model fit and quality indices having very good values. In the analysis of consumers’ proenvironmental behaviour regarding energy conservation and their intention to behave in a proenvironmental manner, this model proved to have a strong predictive power. Five of seven hypotheses were validated, the newly introduced variable proving to be a success. The proposed model is unique and will offer companies and organizations a valuable green marketing tool which can be used in the fight for environment protection and energy conservation.

  8. Evaluation of the Learning Process of Students Reinventing the General Law of Energy Conservation

    Science.gov (United States)

    Logman, Paul; Kaper, Wolter; Ellermeijer, Ton

    2015-01-01

    To investigate the relationship between context and concept we have constructed a conceptual learning path in which students reinvent the concept of energy conservation and embedded this path in two authentic practices. A comparison of the expected learning outcome with actual student output for the most important steps in the learning path gives…

  9. Rock the Watt: An Energy Conservation Campaign at Pacific Northwest National Lab

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-01-01

    Case study describes Pacific Northwest National Laboratory's (PNNL) three-month Rock the Watt campaign to reduce energy use at its main campus in Richland, Washington. The campaign objectives were to educate PNNL employees about energy conservation opportunities in their workplace and to motivate them to help PNNL save energy and costs and to reduce greenhouse gas emissions.

  10. A policy of nuclear energy or energy conservation - on the construction of a wrong alternative

    International Nuclear Information System (INIS)

    Traube, K.

    1981-01-01

    From the content: a secret good-bye - wrong information from the energy experts - is there any priority for the efficient utilization of energie - do nuclear energy and energy conservation measures complement each other - the hidden socio-political dimensions - counter-information is necessary. (HP) [de

  11. Energy Conservation and Solar Retrofitting for Existing Buildings in Oregon: An Architectural Design Class Project.

    Science.gov (United States)

    Oregon Univ., Eugene. School of Architecture and Allied Arts.

    Five privately owned homes and two university owned homes were examined by architecture students in order to formulate design alternatives to fit the houses with solar collection, storage, and control devices for supplementing domestic space and/or water heating. General principles advanced include why energy conservation and solar retrofitting…

  12. Fostering support for work floor energy conservation policies : Accounting for privacy concerns

    NARCIS (Netherlands)

    Bolderdijk, J.W; Steg, L.; Postmes, T.

    The advent of electronic monitoring technology (e.g., smart meters and in-car GPS devices) poses the opportunity for organizations to promote energy conservation behaviors among their employees through individual feedback and incentives. Although electronic monitoring thus can help in reducing the

  13. A True Proteus: A history of energy conservation in German science and culture, 1847-1914

    NARCIS (Netherlands)

    Wegener, F.D.A.

    2009-01-01

    This thesis follows the career of the law of energy conservation in German science and culture between 1847 and 1914. There is an interesting contrast between the initial reception of Hermann Helmholtz’ 1847 treatise ‘Über die Erhaltung der Kraft’, which was rejected by the editor of the Annalen der

  14. 24 CFR 990.185 - Utilities expense level: Incentives for energy conservation/rate reduction.

    Science.gov (United States)

    2010-04-01

    ... (of the type affected by the energy conservation measure) after implementation of the energy...) Utility benchmarking. HUD will pursue benchmarking utility consumption at the project level as part of the... convene a meeting with representation of appropriate stakeholders to review utility benchmarking options...

  15. Energy Conservation in Dissipative Processes: Teacher Expectations and Strategies Associated with Imperceptible Thermal Energy

    Science.gov (United States)

    Daane, Abigail R.; McKagan, Sarah B.; Vokos, Stamatis; Scherr, Rachel E.

    2015-01-01

    Research has demonstrated that many students and some teachers do not consistently apply the conservation of energy principle when analyzing mechanical scenarios. In observing elementary and secondary teachers engaged in learning activities that require tracking and conserving energy, we find that challenges to energy conservation often arise in…

  16. 47 CFR 76.75 - Specific EEO program requirements.

    Science.gov (United States)

    2010-10-01

    ... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Equal Employment Opportunity Requirements § 76.75 Specific EEO... or sex is prohibited and that they may notify the Equal Employment Opportunity Commission, the... necessary. Nothing in this section shall be interpreted to require a multichannel video programming...

  17. 7 CFR 3052.235 - Program-specific audits.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Program-specific audits. 3052.235 Section 3052.235 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF THE CHIEF FINANCIAL OFFICER, DEPARTMENT OF AGRICULTURE AUDITS OF STATES, LOCAL GOVERNMENTS, AND NON-PROFIT ORGANIZATIONS Audits § 3052.235...

  18. Macro-economic effects of additional energy conservation in the European Community

    International Nuclear Information System (INIS)

    Sips, H.W.; Bakker, L.; Muizelaar, J.; Velthuijsen, J.W.

    1991-01-01

    The aim of the title study is to evaluate the environmental and economic consequences of additional energy conservation in five Western European countries: the Netherlands, the Federal Republic of Germany, the United Kingdom, France and Italy. In the first part of the study the economic effects of a policy, in which additional energy conservation is realized only for the Netherlands, is calculated. In this report the results are presented. The calculated results of the economic effects of a coordinated energy conservation policy in the abovementioned countries will be published in a separate report. The effects of three policy variants will be evaluated: the non-financial policy variant, the shift of the financial burden variant, and the variant in which the levies are not compensated.The starting point for the first variant is an autonomous realization of the energy conservation. The basis of the second variant is that an equal amount of energy can be saved by means of a substantial energy levy. The profits of this levy can be used to reduce the financial burden of labour. For the economic calculations use has been made of the HERMES-model. Every member of the European Community has developed such a macro-economic model. In chapter two the different starting points for the calculations are outlined, with special attention to descriptions of the policy variants, the model-input and the basic projection. In chapter three the economic effects of the policy variants are presented and discussed. In chapter four the energy conservation and the environmental effects of the variants are dealt with. The most important conclusion of this study is that a considerable amount of energy can be saved, which will have positive effects on the economy and the environment. 8 figs., 20 tabs., 6 apps., 32 refs

  19. A Domain-Specific Programming Language for Secure Multiparty Computation

    DEFF Research Database (Denmark)

    Nielsen, Janus Dam; Schwartzbach, Michael Ignatieff

    2007-01-01

    We present a domain-specific programming language for Secure Multiparty Computation (SMC). Information is a resource of vital importance and considerable economic value to individuals, public administration, and private companies. This means that the confidentiality of information is crucial...... on secret values and results are only revealed according to specific protocols. We identify the key linguistic concepts of SMC and bridge the gap between high-level security requirements and low-level cryptographic operations constituting an SMC platform, thus improving the efficiency and security of SMC...

  20. Demonstrations of the Action and Reaction Law and the Energy Conservation Law Using Fine Spherical Plastic Beads

    Science.gov (United States)

    Khumaeni, A.; Tanaka, S.; Kobayashi, A.; Lee, Y. I.; Kurniawan, K. H.; Ishii, K.; Kagawa, K.

    2008-01-01

    Equipment for demonstrating Newton's third law and the energy conservation law in mechanics have successfully been constructed utilizing fine spherical plastic beads in place of metal ball bearings. To demonstrate Newton's third law, special magnetized Petri dishes were employed as objects, while to examine the energy conservation law, a…

  1. Mathematical Challenges to Secondary School Students in a Guided Reinvention Teaching-Learning Strategy towards the Concept of Energy Conservation

    NARCIS (Netherlands)

    Logman, P.S.W.M.; Kaper, W.H.; Ellermeijer, A.L.; Taşar, M.F.

    2014-01-01

    Guiding sixteen-year-old students to rediscover the concept of energy conservation may be done in three distinct learning steps. First, we have chosen for the students to reinvent what we call partial laws of energy conservation (e.g. Σm∙g∙h = k1). Secondly, the students are asked to combine these

  2. 41 CFR 102-74.155 - What energy conservation policy must Federal agencies follow in the management of facilities?

    Science.gov (United States)

    2010-07-01

    ... policy must Federal agencies follow in the management of facilities? 102-74.155 Section 102-74.155 Public... MANAGEMENT REGULATION REAL PROPERTY 74-FACILITY MANAGEMENT Facility Management Energy Conservation § 102-74.155 What energy conservation policy must Federal agencies follow in the management of facilities...

  3. A Guided Re-invention Path Towards a More Versatile Concept of Energy Conservation For Secondary School Students

    NARCIS (Netherlands)

    Logman, P.S.W.M.; Kaper, W.H.; Ellermeijer, A.L.; Taşar, M.F.

    2014-01-01

    Traditionally the concept of energy conservation is introduced as an undisputable physical law that helps us describe many processes. However the usefulness and the validity of the concept of energy conservation evades many students. We intend to make the concept more useful and less abstract to

  4. Energy-Integrating Master Plan for the City of Atlantic City, New Jersey: energy conservation element. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    1978-11-01

    The Master Plan describes a coordinated energy-conservation effort for the City, the effective application and ultimate success of which depend primarily on the active involvement of the City government and its functional departments. Following an introductory section, Section XXI, Community Energy Determinants, describes the natural and man-made environment, growth and energy profiles, and the institutional environment. Additional sections are entitled: Energy-Conservation Options (passive energy options and active energy-conservation options); Energy Integration; Community Energy Management; Energy-Conservation Implementation Plan; and an appendix containing an energy-related glossary, a directory to various sources of information on energy conservation, various technical documents, a copy of the National Energy Act, and a bibliography. (MCW)

  5. Household energy conservation attitudes and behaviors in the Northwest: Tracking changes between 1983 and 1985

    Energy Technology Data Exchange (ETDEWEB)

    Fang, J.M.; Hattrup, M.P.; Nordi, R.T.; Shankle, S.A.; Ivey, D.L.

    1987-05-01

    Pacific Northwest Laboratory (PNL) has analyzed the changes in consumer energy conservation attitudes and behaviors in the Pacific Northwest between 1983 and 1985. The information was collected through stratified random telephone surveys on 2000 and 1058 households, respectively, for 1983 and 1985 in the Bonneville Power Administration (BPA) service area in Idaho, Oregon, Washington and Western Montana. This report covers four topic areas and tests two hypotheses. The topics are as follows: consumer perceptions and attitudes of energy use and conservation in the home; consumer perceptions of energy institutions and other entities; past and intended conservation actions and investments; and segmentation of homeowners into market prospect groups. The hypotheses tested are as follows: (1) There has been no change in the size and psychographic make-up of the original three market segments found in the 1983 survey analysis; and (2) image profiles of institutions with respect to familiarity, overall impression, and believability as sources of energy conservation information remain unchanged since 1983.

  6. Technical analysis on energy conservation and emission reduction of new energy electric vehicle in China

    Science.gov (United States)

    Zheng, Chaocheng

    2017-10-01

    With the global environmental problems and energy crisis continuously emerging, all countries are taking active measures to achieve the benign development of domestic economy and society. Vehicle, as a large oil consumption and emissions of carbon dioxide, nend to be a revolutionary change. Therefore, the development of new energy electric vehicle has become the consensus of the world. On this background, this paper has sorted out the current state and the related development planning of new energy electric vehicles in different countries to predict the car ownership of the new energy electric vehicles using elastic coefficient method and setting different path of development, conclude that under the consideration of energy conservation and emissions reduction factors, our country should mainly promote the BEV to realize the maximum energy conservation and emissions reduction.

  7. Energy conservation and management plan for plant facilities at the Livermore site

    Energy Technology Data Exchange (ETDEWEB)

    Ng, W.; Szybalski, S.; Kerr, W. H.; Meyer, H. J.

    1976-03-15

    An energy conservation and management plan for the Livermore site of the Lawrence Livermore Laboratory is presented. The plan defines the energy-conservation goals for the next 10 years and proposes the ways and means of attaining them. The main features contained in this plan are as follows: development of the criteria and underlying assumptions required for long range planning, including energy growth rates and the case for using the concept of the technical-fix energy growth rate, LLL energy outlook and fuel cost projections, and life-cycle-cost criteria; targets of the long-range plan include between 1975 and 1985, an annual energy usage growth equal to 5.8 percent of the 1975 energy consumption, 1985 and thereafter, zero energy growth, a change from the current dependence on natural gas to the use of other fuels for heating, and a doubling of the 30-day strategic oil storage capacity; and cost schedule for the next 10 years.

  8. Environmental issues and energy conservation in buildings in Pakistan: role of architectural intervention

    International Nuclear Information System (INIS)

    Arif, S.; Khan, A.; Alamgir, K.; Alamgir, K.

    2011-01-01

    Energy shortage and environmental catastrophe is the severe problem globally and particularly important for the developing countries like Pakistan. There is a serious need to solve the problem for a sustainable building environment as the building sector has become a major consumer of energy. An attempt has been made for the building professionals and building users for adherence into their design and construction the energy conservation measures to reduce environmental problems more easily after the thorough review of the famous authors' research work and findings in this field. The ultimate aim is the establishment of awareness for the building professionals for delivering sustainable buildings in Pakistan. Through the implementation of design measures to mitigate the urban heat island, the general public can decrease their demand for energy and effectively cool the urban landscape. In addition to the economic benefits, energy conservation leads to reductions in CO/sub 2/ emissions. (author)

  9. Planning an energy-conserving policy for Taiwan based on international examples of success

    International Nuclear Information System (INIS)

    Lu, S.-M.; Huang, Y.-S.; Lu, J.-M.

    2008-01-01

    Taiwan lacks indigenous energy resources and imports 99% of its energy supply. This heavy energy-dependence represents a hidden threat for Taiwan's energy security and economic development. The most effective solution thus is to adopt an energy-conservation policy, similar to those successfully implemented in certain highly developed countries, such as the UK, the USA, Japan, and Germany. From the successful experiences of these countries, this study proposes a general mechanism of increasing energy efficiency by 2% annually, together with an executive master plan, followed by a scenario breakdown for energy-conserving policy in Taiwan. The feasibility of these proposals has been confirmed by the finding that their achievements in terms of energy saving and CO 2 emission reduction conform to the goals of the 'Taiwan National Energy Conference 2005'

  10. Energy conservation in China: Key provincial sectors at two-digit level

    International Nuclear Information System (INIS)

    Liao, Hua; Du, Jian; Wei, Yi-Ming

    2013-01-01

    Highlights: ► We identify the keys for energy conversation across China’s 31 provinces × 65 sectors. ► The results are visualized in map and matrix tables, and easy for use. ► 39 Industrial sectors by province are classified into three categories for conservation. ► There is large energy wasting in the public management sector. ► There are both urban–rural gap and provincial inequality on electricity consumption. - Abstract: In March 2011, China’s central government set a new challenging target of reducing its energy intensity by 16% during 2011–2015, after it had achieved a reduction of 19.1% during 2006–2010. And this new target was assigned to provincial authorities in August 2011. However, China’s provincial energy-economic developments are unbalanced and different provinces have different key sectors for energy conservation. Most previous studies focused on provincial energy efficiency at the aggregate level, or the three-industry level (or one-digit level). However, whether for policy decision or academic research, it is necessary to further subdivide the sectors. In this paper, we use three indicators (Gini Coefficient, energy consumption share and energy intensity) to compare provincial energy conservation potentials at the two-digit sector level. To our knowledge, this paper is the first one to identify the keys for energy conversation across the 31 provinces × 65 sectors. And the results are shown in visualized maps and matrix tables to help identify the key province × sectors for energy conservation easier. This also helps the central and provincial governments to distinguish key sectors when they monitor the energy conservation progress

  11. Sustainable chains and energy conservation. Final report of the preliminary phase

    International Nuclear Information System (INIS)

    Bakker, C.; Bonekamp, L.

    2002-01-01

    An overview is given of the preparatory phase of the project on the title subject. Eleven pre-pilot projects (feasibility studies) are described of which 6 are elaborated in detail: energy conservation in the pig meat chain; Novel Protein Foods; dairy industry, in particular so-called cheese cows; dry matter content of potatoes for french fries; tare reduction of potatoes in the chain of pre-baked fries; and the export of tomatoes by maritime transport [nl

  12. Performance of two Vermont elementary school integrated energy conservation/solar energy retrofit projects

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, J.W. (Marlboro College, VT); Converse, A.O.

    1980-01-01

    Two Vermont elementary school energy conservation/passive solar energy retrofit projects are described. Both masonry buildings were insulated with polystyrene on the east, north and west exterior walls. The south walls of each building were converted to Trombe walls, and, in addition, a portion of the south wall of one building was fitted with a solar greenhouse. The construction details, the predicted performance, and some actual results are reported here.

  13. Technological choices and development: the energy conservation case in the Tunisian industry

    International Nuclear Information System (INIS)

    Sellami, H.

    1988-01-01

    The technological choices for an industrial development, especially in a developing country such as Tunisia, may be determined by two opposite principles: the appropriate technologies and the technological short cuts. The methodological approach presented here is based on a comparison of the technological choices for energy conservation in France and in Tunisia. The main energy consuming industrial sectors are analyzed for their technology use and their relative energy consumptions

  14. The potential estimation and factor analysis of China′s energy conservation on thermal power industry

    International Nuclear Information System (INIS)

    Lin, Boqiang; Yang, Lisha

    2013-01-01

    At present, researches about energy conservation are focused on prediction. But there are few researches focused on the estimation of effective input and energy conservation potential, and there has been even no research on energy conservation of thermal power industry of China. This paper will try to fill in such a blank. Panel data on Chinese thermal power industry over 2005–2010 are established, and we adopt the stochastic frontier analysis approach to estimate the energy saving potential of thermal power industry. The results are as follows: (1) the average efficiency of energy inputs in China′s thermal power industry over 2005–2010 was about 0.85, and cumulative energy saving potential equals to 551.04 (Mtce); (2) by improving the non-efficiency factors, the relatively backward inland cities could achieve higher energy saving in thermal power industry; (3) the energy input efficiency of Eastern China Grid is shown to be the highest; (4) in order to realize the energy-saving goal of thermal power industry, one important policy method the government should adopt is to conduct a market-oriented reform in power industry and break the state-owned monopoly to provide incentives for private and foreign direct investment in thermal power sector. -- Highlights: •We adopt SFA model to estimate the coal input efficiency of power sector in China. •We calculate the cumulative energy saving potential equals to 551.04 Mtce. •East China power grid has the highest energy input efficiency. •Some backward inland cities may be the main force for future energy conservation. •Encourage private and foreign direct investment in power sector might be effective

  15. Analysis of energy demand, and evaluation of energy conservation measures in urban districts

    International Nuclear Information System (INIS)

    Nakamura, H.; Yoshida, N.

    1994-01-01

    Mitsubishi Research Institute has analyzed the energy demand of a typical Japanese city, Yokohama, as well as the distribution of fossil-energy flow, and the final consumption by sectors. It has evaluated the effectiveness of various energy conservation measures, (e.g., cogeneration, electric cars, insulation,...) in countering the global warming trend. This study defines a viable methodology which may be utilized, in the future, in examining the effectiveness of environmental policies. (TEC). 1 tab., 4 figs

  16. Final report for EDI energy conservation with diode light; Slutrapport for EDI energibesparelser med diodelys

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The aim of this project has been to develop technological knowledge and a competence platform for utilization of new light emitting diode technology for general lighting purposes. Furthermore the project has aimed at developing a 3 W light diode bulb to replace 15-20 W filament bulbs and halogen spotlights, and thereby demonstrating a large energy conservation potential in the use of LED technology for lighting purposes. (BA)

  17. Conflicts in Everyday Life: The Influence of Competing Goals on Domestic Energy Conservation

    OpenAIRE

    Anneli Selvefors; I. C. MariAnne Karlsson; Ulrike Rahe

    2015-01-01

    A common approach for understanding people’s domestic energy behavior is to study the influence of deterministic factors, such as attitudes, norms and knowledge, on behavior. However, few studies have succeeded in fully explaining people’s behavior based on these factors alone. To further the understanding of people’s everyday energy use, a goal-oriented approach based on activity theory has been applied to discuss energy conservation from a multiple goal perspective based on the findings fr...

  18. A Survey on Energy Conserving Mechanisms for the Internet of Things: Wireless Networking Aspects

    OpenAIRE

    Zeeshan Abbas; Wonyong Yoon

    2015-01-01

    The Internet of Things (IoT) is an emerging key technology for future industries and everyday lives of people, where a myriad of battery operated sensors, actuators, and smart objects are connected to the Internet to provide services such as mobile healthcare, intelligent transport system, environmental monitoring, etc. Since energy efficiency is of utmost importance to these battery constrained IoT devices, IoT-related standards and research works have focused on the device energy conserving...

  19. Visible cost - invisible profit. The heating, ventilation and sanitary sector and the realization of energy conservation. Among politics, knowledge and practice; Synlig kostnad - skjult gevinst. VVS-bransjen og realisering av ENOEK. Mellom politikk, kunnskap og praksis

    Energy Technology Data Exchange (ETDEWEB)

    Hubak, Marit

    1998-07-01

    In social research, technology has customarily been considered problem-generating. What is needed to turn new technology into a positive instrument in environmental work? To answer this question one must understand the interaction between politics, knowledge and practice that is important for dealing with the environmental challenges. It is a main objective of this book to contribute to this understanding by analysing how the building industry deals with the energy and environmental challenges that are commonly known as energy conservation. Specifically, the book deals with the heating, ventilation and sanitary sector since this is where most of the companies working with energy conservation are found. The discussion applies to Norway0.

  20. Feasibility study on energy conservation and environmental improvement at Pakistan Steel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Feasibility study on energy conservation and environmental improvement was carried out with the aim of considering the realization of the CDM (clean development mechanism) project for reduction of global warming gas emissions and contributing to the environmental improvement and economic growth in Pakistan. In the study, projects on the following were studied: coke oven coal moisture control (CMC), sinter cooler waste heat recovery, blast furnace hot stove waste heat recovery, blast furnace pulverized coal injection (PCI), blast furnace top pressure recovery turbine (TRT), hot strip mill reheating furnace regenerative type burner, coke oven environmental improvement, and blast furnace cast house dust collection. As a result of the study, the implementation of the following three projects was regarded as promising in terms of energy conservation and economical effects: blast furnace pulverized coal injection, blast furnace top pressure recovery turbine and hot strip mill reheating furnace regenerative type burner. Further, the reduction in poisonous gas by the coke oven environmental improvement project was made a top priority. In Pakistan, the price of energy is kept low, and therefore, effects of energy conservation projects are not very much expected. However, the PCI project has an effect of substitution of low-priced domestic coal for imported coal. (NEDO)