On the global ship hull bending energy in ship collisions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Li, Yujie

2009-01-01

During ship collisions part of the kinetic energy of the involved vessels immediately prior to contact is absorbed as energy dissipated by crushing of the hull structures, by friction and by elastic energy. The purpose of this report is to present an estimate of the elastic energy that can...... be stored in elastic hull vibrations during a ship collision. When a ship side is strengthened in order to improve the crashworthiness it has been argued in the scientific literature that a non-trivial part of the energy released for structural deformation during the collision can be absorbed as elastic...... energy in global ship hull vibrations, such that with strong ship sides less energy has to be spent in crushing of the striking ship bow and/or the struck ship side. In normal ship–ship collision analyses both the striking and struck ship are usually considered as rigid bodies where structural crushing...

India's ship recycling trade-off

NARCIS (Netherlands)

Worrell, E.; Athanasopoulou, V.

2014-01-01

The special nature of India's steel industry lends particular importance to ship recycling as a source of scrap. Ship recycling in upgraded 'green' facilities can substitute other 'dirty' ironmaking processes, resulting in energy savings and air pollutant emission reductions for the Indian steel

Special Purpose Materials annual progress report, October 1, 1979

International Nuclear Information System (INIS)

1980-04-01

The scope of Special Purpose Materials covers fusion reactor materials problems other than the first-wall and blanket structural materials, which are under the purview of the ADIP, DAFS, and PMI task groups. Components that are considered as special purpose materials include breeding materials, coolants, neutron multipliers, barriers for tritium control, materials for compression and OH coils and waveguides, graphite and SiC, heat-sink materials, ceramics, and materials for high-field (> 10-T) superconducting magnets. It is recognized that there will be numerous materials problems that will arise during the design and construction of large magnetic-fusion energy devices such as the Engineering Test Facility (ETF) and Demonstration Reactor (DEMO). Most of these problems will be specific to a particular design or project and are the responsibility of the project, not the Materials and Radiation Effects Branch. Consequently, the Task Group on Special Purpose Materials has limited its concern to crucial and generic materials problems that must be resolved if magnetic-fusion devices are to succeed. Important areas specifically excluded include low-field (8-T) superconductors, fuels for hybrids, and materials for inertial-confinement devices. These areas may be added in the future when funding permits

33 CFR 151.06 - Special areas.

Science.gov (United States)

2010-07-01

....06 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) POLLUTION... Pertains to Pollution from Ships General § 151.06 Special areas. (a) For the purposes of this part, the... that portion of the Atlantic Ocean within the boundary constituted by the 30° N parallel from Florida...

A special purpose simulation language for nuclear power plants

International Nuclear Information System (INIS)

Saphier, D.

1980-01-01

A special purpose block-oriented simulation language, 'The Dynamic Simulator for Nuclear Power Plants' (DSNP), was developed at Argonne National Laboratory. The dominant feature of DSNP is the ability to transform a power plant flowchart or block diagram directly into a simulation program. The user is required to recognize the symbolic DSNP statements for the appropriate physical component, and list these statements in a logical sequence according to the flow of physical properties in the simulated power plant. At present most of the component models in DSNP are of the lumped parameter type. Although DSNP is a special purpose simulation language, it also has all the features of a general purpose simulation language, and in particular a powerful macro processor. The use of DSNP is demonstrated by a sample problem simulating a reactor startup accident. (Auth.)

Study of accident environment during sea transport of nuclear material: Analysis of an engine room fire on a purpose built ship. Annex 5

International Nuclear Information System (INIS)

Yamamoto, K.; Shibata, H.; Ouchi, Y.; Kitamura, T.; Ito, T.; Hohnstreiter, G.F.; Pierce, J.D.; Koski, J.A.; Dukart, R.J.

2001-01-01

The program goal was to show that the IAEA safe transport regulations adequately cover the thermal effects of an engine-room fire on plutonium transportation packages stowed aboard a purpose built ship. The packages are stored in transportation containers located in a cargo hold of the ship. This study addressed the heat transfer from an engine-room fire that could heat and evaporate water out of the water-filled bulkhead and the resulting temperature conditions around the packages and inside the packages near their elastomeric seals. This study was designed to estimate the thermal response of a plutonium package in the hold of a purpose built ship during a shipboard fire, and furthermore, to confirm the sufficiency and adequacy of the current IAEA transport regulation

On Impact Mechanics in Ship Collisions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Zhang, Shengming

1998-01-01

The purpose of this paper is to present analytical, closed-form expressions for the energy released for crushing and the impact impulse during ship collisions. Ship-ship collisions, ship collisions with rigid walls and ship collisions with flexible offshore structures are considered. The derived ...

Outer Dynamics of Ship Collisions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup

1996-01-01

The purpose is to present analysis procedures for the motion of ships during ship-ship collisions and for ship collisions with offshore structures. The aim is to estimate that part of the lost kinetic energy which will have to be absorbed by rupture and plastic damage of the colliding structures....

Outer Dynamics of Ship Collisions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup

1996-01-01

The purpose of these notes is to present analysis procedures for the motion of ships during ship-ship collisions and for ship collisons with offshore structures. The aim is to estimate that part of the lost kinetic energy which will have to be absorbed by rupture and plastic damage of the colliding...

Civilian nuclear ships

International Nuclear Information System (INIS)

Oelgaard, P.L.

1993-03-01

This report contains a review of the information available on nuclear powered ships, built for civilian purposes. In the introduction a short discussion is given of the reasons for the limited use of nuclear ships for these purposes. In the second section a brief review is presented of data for the three experimental/merchant ships build by the United States, Germany and Japan, i.e. NS Savannah, NS Otto Hahn and NS Mutsu. In the third section the Soviet/Russian icebreaker NS Lenin is considered. Its design, operational experience and the introduction of a new nuclear propulsion plant is reviewed. In the fourth section the newer Soviet/Russian icebreakers with nuclear propulsion are considered. Finally design of the Soviet/Russian icebreaker transport/container ship NS Sevmorput is reviewed in the fifth section. The future Russian plans for nuclear vessels for the arctic waters are briefly discussed. (au)

Automatic production planning for the construction of complex ships

NARCIS (Netherlands)

Rose, C.D.

2017-01-01

European shipyards specialize in building complex ship types including offshore vessels, yachts, dredgers, and cruise ships. One key difference between these ships and the simple cargo ships typically built in the Far East is the amount and variety of mission-related equipment required to operate

Calculation of the collision resistance of ships and its assessment for classification purposes

International Nuclear Information System (INIS)

Boeckenhauer, M.; Egge, E.D.

1994-01-01

Within the framework of a research programme ''Tanker Safety'', Germanischer Lloyd has developed a program system for the evaluation of the absorbed plastic deformation energy in a ship-ship collision. The ultimate load capacities of the ship structures in the areas affected by the collision are evaluated stepwise. The total collision energy absorbed by plastic deformations of the ship structures is evaluated on the basis of the minima of the ultimate load capacities and the corresponding penetration depths. By means of the collision energy absorbed, the collision speed necessary to cause damage can be determined.It is now possible to classify ships with regard to their resistance against collisions and to assign relevant class notations.The resistance of a ship against collision impacts is expressed by the class notation COLL with index numbers ranging from 1 to 6. The index numbers indicate that - as compared with a non-strengthened single hull reference ship - a critical situation is likely to occur only if the deformation energy absorbed in the collision exceeds that of the non-strengthened reference ship by specified values.A ''critical situation'' is defined by, for example, rupture of cargo tanks with subsequent spillage of cargo or water ingress into dry cargo holds. ((orig.))

UTV Expansion Pack: Special-Purpose Rank-Revealing Algorithms

DEFF Research Database (Denmark)

Fierro, Ricardo D.; Hansen, Per Christian

2005-01-01

This collection of Matlab 7.0 software supplements and complements the package UTV Tools from 1999, and includes implementations of special-purpose rank-revealing algorithms developed since the publication of the original package. We provide algorithms for computing and modifying symmetric rank-r...... values of a sparse or structured matrix. These new algorithms have applications in signal processing, optimization and LSI information retrieval.......This collection of Matlab 7.0 software supplements and complements the package UTV Tools from 1999, and includes implementations of special-purpose rank-revealing algorithms developed since the publication of the original package. We provide algorithms for computing and modifying symmetric rank......-revealing VSV decompositions, we expand the algorithms for the ULLV decomposition of a matrix pair to handle interference-type problems with a rank-deficient covariance matrix, and we provide a robust and reliable Lanczos algorithm which - despite its simplicity - is able to capture all the dominant singular...

On impact mechanics in ship collisions

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Zhang, Shengming

1998-01-01

The purpose of this paper is to present analytical, closed-form expressions for the energy released for crushing and the impact impulse during ship collisions. Ship–ship collisions, ship collisions with rigid walls and ship collisions with flexible offshore structures are considered. The derived ...

12 CFR 202.8 - Special purpose credit programs.

Science.gov (United States)

2010-01-01

... requirements of paragraph (a) of this section, a creditor may request and consider information regarding the... the case of financial need. If financial need is one of the criteria under a special purpose credit.... Subject to the provisions of paragraph (b) of this section, the Act and this regulation permit a creditor...

32 CFR 700.872 - Ships and craft in drydock.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Ships and craft in drydock. 700.872 Section 700... Special Circumstances/ships in Naval Stations and Shipyards § 700.872 Ships and craft in drydock. (a) The... ship or craft, not in commission, is in a naval drydock, the provisions of this article shall apply...

47 CFR 80.1121 - Receipt and acknowledgement of distress alerts by ship stations and ship earth stations.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Receipt and acknowledgement of distress alerts by ship stations and ship earth stations. 80.1121 Section 80.1121 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety System (GMDSS)...

Architecture and program structures for a special purpose finite element computer

Energy Technology Data Exchange (ETDEWEB)

Norrie, D.H.; Norrie, C.W.

1983-01-01

The development of very large scale integration (VLSI) has made special-purpose computers economically possible. With such a machine, the loss of flexibility compared with a general-purpose computer can be offset by the increased speed which can be obtained by tailoring the architecture to the particular problem or class of problem. The first kind of special-purpose machine has its architecture modelled on the physical structure of the problem and the second kind has its design tailored to the computational algorithm used. The parallel finite element machine (PARFEM) being designed at the University of Calgary for the solution of finite element problems is of the second kind. Its conceptual design is described and progress to date outlined. 14 references.

46 CFR 114.550 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Special consideration. 114.550 Section 114.550 Shipping... consideration. In applying the provisions of this subchapter, the OCMI may give special consideration to... vessel operates must approve any special consideration granted to the vessel. ...

46 CFR 175.550 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Special consideration. 175.550 Section 175.550 Shipping...) GENERAL PROVISIONS § 175.550 Special consideration. In applying the provisions of this subchapter, the OCMI may give special consideration to authorizing departures from the specific requirements when...

Luggage and shipped goods

International Nuclear Information System (INIS)

Vogel, H.; Haller, D.

2007-01-01

Summary: Purpose: Control of luggage and shipped goods are frequently carried out. The possibilities of X-ray technology shall be demonstrated. Materials and methods: There are different imaging techniques. The main concepts are transmission imaging, backscatter imaging, computed tomography, and dual energy imaging and the combination of different methods The images come from manufacturers and personal collections. Results: The search concerns mainly, weapons, explosives, and drugs; furthermore animals, and stolen goods, Special problems offer the control of letters and the detection of Improvised Explosive Devices (IED). Conclusion: One has to expect that controls will increase and that imaging with X-rays will have their part. Pattern recognition software will be used for analysis enforced by economy and by demand for higher efficiency - man and computer will produce more security than man alone

46 CFR 169.112 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Special consideration. 169.112 Section 169.112 Shipping... Provisions § 169.112 Special consideration. In applying the provisions of this part, the Officer in Charge, Marine Inspection, may give special consideration to departures from the specific requirements when...

77 FR 45921 - Alaskan Fuel Hauling as a Restricted Category Special Purpose Flight Operation

Science.gov (United States)

2012-08-02

... operations, each aircraft used to transport fuel will be required to receive FAA certification for the... regulations. The special purpose of Alaskan fuel hauling was considered for aircraft type-certificated under... required for this special purpose. The fuel hauling system must be shown to meet the applicable...

Fourth annual progress report on special-purpose materials for magnetically confined fusion reactors

International Nuclear Information System (INIS)

1982-08-01

The scope of Special Purpose Materials covers fusion reactor materials problems other than the first-wall and blanket structural materials, which are under the purview of the ADIP, DAFS, and PMI task groups. Components that are considered as special purpose materials include breeding materials, coolants, neutron multipliers, barriers for tritium control, materials for compression and OH coils and waveguides, graphite and SiC, heat-sink materials, ceramics, and materials for high-field (>10-T) superconducting magnets. The Task Group on Special Purpose Materials has limited its concern to crucial and generic materials problems that must be resolved if magnetic-fusion devices are to succeed. Important areas specifically excluded include low-field (8-T) superconductors, fuels for hybrids, and materials for inertial-confinement devices. These areas may be added in the future when funding permits

Tokamak Fusion Core Experiment (TFCX) special-purpose remote maintenance systems

International Nuclear Information System (INIS)

Masson, L.S.; Welland, H.J.

1985-01-01

A key element in the preconceptual design of the Tokamak Fusion Core Experiment (TFCX) was the development of design concepts for special-purpose remote maintenance systems. Included were systems for shield sector replacement, vacuum vessel sector and toroidal field coil replacement, limiter blade replacement, protective tile replacement, and general-purpose maintenance. This paper addresses these systems as they apply to the copper toroidal field (TF) coil version of the TFCX

Environmental impact analysis of the Nuclear Merchant Ship Program-addendum. Special study

International Nuclear Information System (INIS)

1977-06-01

This study represents a qualitative extension of an earlier Environmental Impact Analysis of the Nuclear Merchant Ship Program (MarAd, 1975) using an Ultra Large Crude Carrier (ULCC) as the reference ship, to other types of ships including a containership, dry-bulk cargo vessel, and an icebreaking oil tanker. This qualitative analysis shows that, for ships operating into coastal ports (containerships and possibly dry-bulk carriers), both ecological and radiological impacts would be somewhat greater than for the reference ULCC docking at an offshore terminal. These impacts can be kept within the guidelines established for land based nuclear power plants by implementation of appropriate operating procedures

46 CFR 190.01-15 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Special consideration. 190.01-15 Section 190.01-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS CONSTRUCTION AND ARRANGEMENT Hull Structure § 190.01-15 Special consideration. (a) Special consideration will...

Modeling of Ship Roll Dynamics and Its Coupling with Heave and Pitch

Directory of Open Access Journals (Sweden)

R. A. Ibrahim

2010-01-01

Full Text Available In order to study the dynamic behavior of ships navigating in severe environmental conditions it is imperative to develop their governing equations of motion taking into account the inherent nonlinearity of large-amplitude ship motion. The purpose of this paper is to present the coupled nonlinear equations of motion in heave, roll, and pitch based on physical grounds. The ingredients of the formulation are comprised of three main components. These are the inertia forces and moments, restoring forces and moments, and damping forces and moments with an emphasis to the roll damping moment. In the formulation of the restoring forces and moments, the influence of large-amplitude ship motions will be considered together with ocean wave loads. The special cases of coupled roll-pitch and purely roll equations of motion are obtained from the general formulation. The paper includes an assessment of roll stochastic stability and probabilistic approaches used to estimate the probability of capsizing and parameter identification.

46 CFR 92.01-15 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Special consideration. 92.01-15 Section 92.01-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS CONSTRUCTION AND ARRANGEMENT Hull Structure § 92.01-15 Special consideration. (a) Special consideration will be...

Ship Structure Committee Publications. A Special Bibliography.

Science.gov (United States)

1992-01-01

STEEL AND SUPPLEMENT ON EMBRITTLEMENT OF "C" STEEL BY NITROGEN Evans, EB. K lingler , Li .......................................................... 13...FROM: NTIS AD-8710SSC-28 CAUSES OF CLEAVAGE FRACTURE IN SHIP PLATE, HIGH YIELD STRENGTH STRUCTURAL STEEL SSC-31 The primary objective of the... careful design, selection of materials, and PART II: THE EFFECT OF SUBCRITICAL HEAT TREATMENT ON goo. workmanship are of the greatest importance in

Design and criticality considerations for 9977 and 9978 shipping packages

International Nuclear Information System (INIS)

Reed, R.; Biswas, D.; Abramczyk, G.

2009-01-01

Savannah River National Laboratory (SRNL) has developed two new, Type B, state-of-the-art, general purpose, fissile material Shipping Packages, designated as 9977 and 9978, as replacements for the U.S. Dept. of Transportation (DOT) specification 6M container. The packages accommodate plutonium, uranium, and other special nuclear materials in bulk quantities and in many forms with capabilities exceeding those of the 6M. A nuclear criticality safety evaluation demonstrates the safe configurations of the new shipping container for plutonium and uranium metal/oxide loading under various conditions for the Safety Analysis Report for Packaging (SARP). The evaluation is in compliance with the performance requirements of 10CFR 71, specifically 10CFR71.55 and 71.59. The criticality safety index (CSI) is 1.0 for most of the contents (Max. Pu Loading -4.4 kg). (authors)

46 CFR 72.01-20 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Special consideration. 72.01-20 Section 72.01-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS CONSTRUCTION AND ARRANGEMENT Hull Structure § 72.01-20 Special consideration. (a) Special consideration will be given to the...

SURVEYING, MODELING AND 3D REPRESENTATION OF A WRECK FOR DIVING PURPOSES: CARGO SHIP “VERA”

OpenAIRE

Ktistis, A.; Tokmakidis, P.; Papadimitriou, K.

2017-01-01

This paper presents the results from an underwater recording of the stern part of a contemporary cargo-ship wreck. The aim of this survey was to create 3D representations of this wreck mainly for recreational diving purposes. The key points of this paper are: a) the implementation of the underwater recording at a diving site; b) the reconstruction of a 3d model from data that have been captured by recreational divers; and c) the development of a set of products to be used by the general publi...

Leadership Profiling of Ocean Going Ship Masters1

Directory of Open Access Journals (Sweden)

Ioannis Theotokas

2014-12-01

This paper focuses on the ocean going ship Masters and aims at identifying their leadership profiles and understanding their attitudes and reactions in given circumstances. It analyses and discusses the results of a field study of ship officers of different nationalities employed as Masters on board ships of a leading international maritime group. Results of the research reveal that the characteristics and the competencies of ship Masters as identified using the specially developed questionnaire, are compatible with those proposed by situational leadership theories. Ship Masters seem to give priority to the people on board and their needs and try to be supportive in their decisions.

LCA-ship. Design tool for energy efficient ships. A Life Cycle Analysis Program for Ships. Final report

Energy Technology Data Exchange (ETDEWEB)

Jiven, Karl; Sjoebris, Anders [MariTerm AB, Goeteborg (Sweden); Nilsson, Maria [Lund Univ. (Sweden). Stiftelsen TEM; Ellis, Joanne; Traegaardh, Peter; Nordstroem, Malin [SSPA Sweden AB, Goeteborg (Sweden)

2004-05-01

In order to make it easier to include aspects during ship design that will improve environmental performance, general methods for life cycle calculations and a prototype tool for LCA calculations of ships and marine transportation have been developed. The base of the life cycle analyses is a comprehensive set of life cycle data that was collected for the materials and consumables used in ship construction and vessel operations. The computer tool developed makes it possible to quickly and simply specify (and calculate) the use of consumables over the vessel's life time cycle. Special effort has been made to allow the tool to be used for different types of vessels and sea transport. The main result from the project is the computer tool LCA ship, which incorporates collected and developed life cycle data for some of the most important materials and consumables used in ships and their operation. The computer application also contains a module for propulsion power calculations and a module for defining and optimising the energy system onboard the vessel. The tool itself is described in more detail in the Computer application manual. The input to the application should, as much as possible, be the kind of information that is normally found in a shipping company concerning vessel data and vessel movements. It all starts with defining the ship to be analysed and continues with defining how the ship is used over the lifetime. The tool contains compiled and processed background information about specific materials and processes (LCA data) connected to shipping operations. The LCA data is included in the tool in a processed form. LCA data for steel will for example include the environmental load from the steel production, the process to build the steel structure of the ship, the scrapping and the recycling phase. To be able to calculate the environmental load from the use of steel the total amount of steel used over the life cycle of the ship is also needed. The

Ship operations report, 1975

International Nuclear Information System (INIS)

1976-01-01

The NOAA Ship Operations Report 1975 was developed to provide a summary of projects undertaken during calendar year 1975. The report was prepared from season, cruise and special reports submitted by ships of the fleet. This report is promulgated for inhouse dissemination in the National Oceanic and Atmospheric Administration, for collaborating and interested agencies, and for use by members of the scientific community. Throughout the year, ships routinely collected and transmitted weather data. Similarly, as NOAA participants in the Integrated Global Ocean Station System (IGOSS) service program, XBT observations were taken and either radioed or submitted in log form via mail. In addition, particulate and radionuclide samples were taken in cooperation with the Atomic Energy Commission, sediment samples were obtained for the Smithsonian Institution and observations were made of marine mammals

Use of the water supply system of special purpose in buildings

Directory of Open Access Journals (Sweden)

Orlov Evgeniy Vladimirovich

Full Text Available A water supply system of a special purpose is a necessary element in hot and cold shops of the industrial enterprises, office buildings and the medical centers, and also other rooms. The water supply systems of a special purpose, which give subsalty, sparkling water and water sated with oxygen, allow people to prevent, for example, strong dehydration of an organism, which is possible at big losses of water, especially in case of the people working in hot shops. Various elements of special drinking water supply system are given in the article, their main functions are described. Different types of the water folding devices pumping water to consumers, one of which is drinking fountain, are considered. Possible systems of water filtration, which can be established for quality improvement, are transferred. Among them the great role is played by membrane technologies and the return osmosis, which is widely applied now. Today there is a possibility of construction, both the centralized water supply system of a special purpose, and local. Besides, the least is a more preferable option taking into account capital expenditure for construction and operation, and also it can lead to solid resource-saving as a result of the electric energy saving going for water heating in heaters. Automatic machines of drinking water for a local water supply system of a special purpose have indisputable advantages. They are capable to carry out several functions at the same time, and also to distribute water to consumers. It allows placing all the necessary equipment, which will be well in harmony with the environment in their small and compact case, and will fit into any difficult interior of the room. Also they are very easily connected to the systems of an internal water supply system by means of a propylene tube that allows to change their sposition in space and to transfer to any place of the room with fast installation of equipment. Also the ecological effect was

Effect of Buffer Bow Structure in Ship-Ship Collision

DEFF Research Database (Denmark)

Yamada, Yasuhira; Endo, Hisayoshi; Pedersen, Preben Terndrup

2008-01-01

tankers, the introduction of buffer bulbous bows has been proposed. Relatively soft buffer bows absorb part of the kinetic energy of the striking ship before penetrating the inner hull of the struck vessel. The purpose of the present paper is to verify the effectiveness of a prototype buffer bulbous bow......) and the forward velocity of the struck ship on the collapse mode of the bow of the striking vessel are investigated. Collapse modes, contact forces and energy absorption capabilities of the buffer bows are compared with those of conventional bows....

A special purpose knowledge-based face localization method

Science.gov (United States)

Hassanat, Ahmad; Jassim, Sabah

2008-04-01

This paper is concerned with face localization for visual speech recognition (VSR) system. Face detection and localization have got a great deal of attention in the last few years, because it is an essential pre-processing step in many techniques that handle or deal with faces, (e.g. age, face, gender, race and visual speech recognition). We shall present an efficient method for localization human's faces in video images captured on mobile constrained devices, under a wide variation in lighting conditions. We use a multiphase method that may include all or some of the following steps starting with image pre-processing, followed by a special purpose edge detection, then an image refinement step. The output image will be passed through a discrete wavelet decomposition procedure, and the computed LL sub-band at a certain level will be transformed into a binary image that will be scanned by using a special template to select a number of possible candidate locations. Finally, we fuse the scores from the wavelet step with scores determined by color information for the candidate location and employ a form of fuzzy logic to distinguish face from non-face locations. We shall present results of large number of experiments to demonstrate that the proposed face localization method is efficient and achieve high level of accuracy that outperforms existing general-purpose face detection methods.

A Nonlinear Ship Manoeuvering Model: Identification and adaptive control with experiments for a model ship

Directory of Open Access Journals (Sweden)

Roger Skjetne

2004-01-01

Full Text Available Complete nonlinear dynamic manoeuvering models of ships, with numerical values, are hard to find in the literature. This paper presents a modeling, identification, and control design where the objective is to manoeuver a ship along desired paths at different velocities. Material from a variety of references have been used to describe the ship model, its difficulties, limitations, and possible simplifications for the purpose of automatic control design. The numerical values of the parameters in the model is identified in towing tests and adaptive manoeuvering experiments for a small ship in a marine control laboratory.

Special-purpose materials for magnetically confined fusion reactors. Third annual progress report

International Nuclear Information System (INIS)

1981-11-01

The scope of Special Purpose Materials covers fusion reactor materials problems other than the first-wall and blanket structural materials, which are under the purview of the ADIP, DAFS, and PMI task groups. Components that are considered as special purpose materials include breeding materials, coolants, neutron multipliers, barriers for tritium control, materials for compression and OH coils and waveguides, graphite and SiC, heat-sink materials, ceramics, and materials for high-field (>10-T) superconducting magnets. It is recognized that there will be numerous materials problems that will arise during the design and construction of large magnetic-fusion energy devices such as the Engineering Test Facility (ETF) and Demonstration Reactor (DEMO). Most of these problems will be specific to a particular design or project and are the responsibility of the project, not the Materials and Radiation Effects Branch. Consequently, the Task Group on Special Purpose Materials has limited its concern to crucial and generic materials problems that must be resolved if magnetic-fusion devices are to succeed. Important areas specifically excluded include low-field (8-T) superconductors, fuels for hybrids, and materials for inertial-confinement devices. These areas may be added in the future when funding permits

Logistical Analysis of the Littoral Combat Ship

National Research Council Canada - National Science Library

Rudko, David

2003-01-01

The purpose of the Littoral Combat Ship (LCS) is to provide the Navy with an affordable, small, multi-mission ship capable of independent, interdependent, and integrated operations inside the littorals...

Special-purpose interactive programming shell for the open-quotes POLEclose quotes system

International Nuclear Information System (INIS)

Rvachev, V.L.; Kurpa, L.I.

1995-01-01

The development of the theory of R-functions has stimulated the emergence of efficient numerical-analytical methods for a wide class of problems associated with physico-mechanical fields. R-functions are the basis for computer-aided level source language, which is sufficiently close to an ordinary mathematical language. Despite the powerful capabilities of the POLE family systems and the extensive support for the analysis of computation results, these systems are still not widely used in practice, as they assume a user with special mathematical qualifications. It is therefore necessary to develop special-purpose systems that do not require the user to be proficient in mathematical physics, the theory of R-functions, variational methods, etc. In other words, we need systems that are oriented toward technical-profile engineers specializing in design and calculations. In this article, we propose some principles for the construction of a special-purpose interactive programming system POLE-PLAST capable of solving problems in the mechanics of deformable solids of complex shape. As the specific application domain for the description of the system we have chosen problems that deal with bending, stability, and vibration of elements of thin-walled constructions modeled by thin plates

Collision simulations of an exclusive ship of spent nuclear fuels

International Nuclear Information System (INIS)

Kitamura, Ou; Endo, Hisayoshi

2000-01-01

Exclusive ships for sea transport of irradiated nuclear fuels operating in Japanese territorial waters are required to be built with the special hull structure against collision. To comply with the official notice 'KAISA No. 520' issued by the Ministry of Transport, the side structure of any such exclusive ship must be designed to secure the specified energy absorption capability based on Minorsky's ship collision model. The Shipbuilding Research Association of Japan (JSRA) has studied the safety in sea transport of nuclear fuels intermittently for these several decades. Recently, the adoption of finite element method has made detailed collision analyses practicable. Since 1998, the regulation research panel No. 46 of JSRA has carried out a series of finite element collision simulations in order to estimate the realistic damage to a typical exclusive ship of spent nuclear fuels. The expected structural responses, global motions and energy absorption capabilities of both colliding and struck ships during collision were investigated. The results of the investigations have shown that the ship is very likely to withstand the collision even with one of the world's largest ship. This is due mainly to her hull structure specially strengthened beyond the crushing strength of the colliding bow structures. (author)

46 CFR 201.7 - Information; special instructions.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Information; special instructions. 201.7 Section 201.7 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION POLICY, PRACTICE AND PROCEDURE RULES OF PRACTICE AND PROCEDURE General Information (Rule 1) § 201.7 Information; special instructions. Information...

Ship operations report, 1973

International Nuclear Information System (INIS)

1973-01-01

The NOAA Fleet Operations Report 1973 was developed to provide a summary of project accomplishments during calendar year 1973. The report was prepared from season, cruise and special reports submitted by ships of the fleet. Centralized management of the NOAA Fleet was finalized by changing the operational control of the National Marine Fisheries Service (NMFS) Ships DAVID STARR JORDAN (FRS 44), TOWNSEND CROMWELL (FRS 43) and MURRE II (FRV 63) from NMFS to the National Ocean Survey on July 1, 1973. Throughout the year, ships routinely collected and transmitted weather data. Similarly, as NOAA participants in the Integrated Global Ocean Station System (IGOSS) service program, XBT observations were taken and either radioed or submitted in log form via mail. In addition, particulate and radionuclide samples were taken in cooperation with the Atomic Energy Commission, sediment samples were obtained for the Smithsonian Institution and observations were made of marine mammals

41 CFR 102-73.170 - What types of special purpose space may the Department of Agriculture lease?

Science.gov (United States)

2010-07-01

... purpose space may the Department of Agriculture lease? 102-73.170 Section 102-73.170 Public Contracts and... § 102-73.170 What types of special purpose space may the Department of Agriculture lease? The Department of Agriculture is delegated the authority to lease the following types of special purpose space: (a...

Navy Hospital ships in history

Directory of Open Access Journals (Sweden)

Sougat Ray

2017-01-01

Full Text Available Hospital ships are operated by the Naval forces in or near war zones to provide medical assistance to the wounded personnel of all nationalities and not be used for any military purpose. Hospital ships possibly existed in ancient times and the Athenian Navy had a ship named Therapia. However, it was only during the 17th century that it became a common practice for the naval squadrons to be accompanied by large ships with the facilities of carrying the wounded after each engagement. In 1860, the steamships HMS Melbourne and HMS Mauritius were equipped with genuine medical facilities. They were manned by the Medical Staff Corps and provided services to the British expedition to China. During the World War I and World War II, passenger ships were converted for use as hospital ships and were started to be used on a massive scale. RMS Aquitania and HMHS Britannic were two famous examples of hospital ships used extensively. Modern US hospital ships USNS Mercy and USNS Comfort are operated by Military Sealift Command of the US Navy. Their primary mission is to provide emergency on-site care for US combatant forces deployed in war or other operations.

Dual Neutral Particle Beam Interrogation of Intermodal Shipping Containers for Special Nuclear Material

Science.gov (United States)

Keith, Rodney Lyman

Intermodal shipping containers entering the United States provide an avenue to smuggle unsecured or stolen special nuclear material (SNM). The only direct method fielded to indicate the presence of SNM is by passive photon/neutron radiation detection. Active interrogation using neutral particle beams to induce fission in SNM is a method under consideration. One by-product of fission is the creation of fragments that undergo radioactive decay over a time period on the order of tens of seconds after the initial event. The "delayed" gamma-rays emitted from these fragments over this period are considered a hallmark for the presence of SNM. A fundamental model is developed using homogenized cargos with a SNM target embedded at the center and computationally interrogated using simultaneous neutron and photon beams. Findings from analysis of the delayed gamma emissions from these experiments are intended to mitigate the effects of poor quality information about the composition and disposition of suspect cargo before examination in an active interrogation portal.

Indexing, learning and content-based retrieval for special purpose image databases

NARCIS (Netherlands)

M.J. Huiskes (Mark); E.J. Pauwels (Eric)

2005-01-01

textabstractThis chapter deals with content-based image retrieval in special purpose image databases. As image data is amassed ever more effortlessly, building efficient systems for searching and browsing of image databases becomes increasingly urgent. We provide an overview of the current

Wave-induced Hydroelastic response of fast monohull ships

DEFF Research Database (Denmark)

Jensen, Jørgen Juncher

1996-01-01

High-speed ships are weight sensitive structures and high strength steel, aluminium or composites are preferred building materials. it is characteristic for these materials that they result in larger hull flexibility than more conventional materials. Therefore, for large fast ships the lowest...... of a quadratic strip theory formulated in the frequency domain. The springing response is thereby excited partly be resonance and partly by non-linear excitation. Special emphasis is given to the influence of springing on fatigue damage as the extreme responses even for very flexible ships are quite insensitive...

Civil Engineering for the SHiP facility

CERN Document Server

Osborne, John Andrew

2015-01-01

The enlarged scope of the recently proposed experiment to search for Heavy Neutral Leptons, SPSC-EOI-010, is a general purpose fixed target facility which in the initial phase is aimed at a general Search for Hidden Particles (SHiP) as well as tau neutrino physics. This report represents an annex to the SHiP Technical Proposal summarizing the civil engineering considerations for SHiP.

Design of Crashworthy Ship Strucures

DEFF Research Database (Denmark)

Toernqvist, Rikard

2003-01-01

The main purpose of the project has been to develop a rational procedure for designing new crashworthy side structures for those ship types where it could be expected that a substantial improvement of the crashworthiness and the related safety could be achieved by careful consideration of the str......The main purpose of the project has been to develop a rational procedure for designing new crashworthy side structures for those ship types where it could be expected that a substantial improvement of the crashworthiness and the related safety could be achieved by careful consideration...... in collision and grounding analysis is the prediction of the onset of fracture and crack propagation in the shell plating. In simulations of accidental loading on ships it is crucial that fracture is determined correctly, as it will influence the global deformation mode and the amount of damage to the hull...

Development of the Nuclear Ship Database. 1. Outline of the Nuclear Ship Experimental Database

Energy Technology Data Exchange (ETDEWEB)

Kyouya, Masahiko; Ochiai, Masa-aki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Hashidate, Kouji

1995-03-01

We obtained the experimental data on the effects of the ship motions and the change in load and caused by the ship operations, the waves, the winds etc., to the nuclear power plant behavior, through the Power-up Tests and Experimental Voyages of the Nuclear Ship MUTSU. Moreover, we accumulated the techniques, the knowledge and others on the Nuclear Ship development at the each stage of the N.S. MUTSU Research and Development program, such as the design stage, the construction stage, the operation stage and others. These data, techniques, knowledge and others are the assembly of the experimental data and the experiences through the design, the construction and the operation of the first nuclear ship in JAPAN. It is important to keep and pigeonhole these products of the N.S. MUTSU program in order to utilize them effectively in the research and development of the advanced marine reactor, since there is no construction plan of the nuclear ship for the present in JAPAN. We have been carrying out the development of the Nuclear Ship Database System since 1991 for the purpose of effective utilization of the N.S. MUTSU products in the design study of the advanced marine reactors. The part of the Nuclear Ship Database System on the experimental data, called Nuclear Ship Experimental Database, was already accomplished and utilized since 1993. This report describes the outline and the use of the Nuclear Ship Experimental Database.The remaining part of the database system on the documentary data, called Nuclear Ship Documentary Database, are now under development. (author).

Development of the Nuclear Ship Database. 1. Outline of the Nuclear Ship Experimental Database

International Nuclear Information System (INIS)

Kyouya, Masahiko; Ochiai, Masa-aki; Hashidate, Kouji.

1995-03-01

We obtained the experimental data on the effects of the ship motions and the change in load and caused by the ship operations, the waves, the winds etc., to the nuclear power plant behavior, through the Power-up Tests and Experimental Voyages of the Nuclear Ship MUTSU. Moreover, we accumulated the techniques, the knowledge and others on the Nuclear Ship development at the each stage of the N.S. MUTSU Research and Development program, such as the design stage, the construction stage, the operation stage and others. These data, techniques, knowledge and others are the assembly of the experimental data and the experiences through the design, the construction and the operation of the first nuclear ship in JAPAN. It is important to keep and pigeonhole these products of the N.S. MUTSU program in order to utilize them effectively in the research and development of the advanced marine reactor, since there is no construction plan of the nuclear ship for the present in JAPAN. We have been carrying out the development of the Nuclear Ship Database System since 1991 for the purpose of effective utilization of the N.S. MUTSU products in the design study of the advanced marine reactors. The part of the Nuclear Ship Database System on the experimental data, called Nuclear Ship Experimental Database, was already accomplished and utilized since 1993. This report describes the outline and the use of the Nuclear Ship Experimental Database.The remaining part of the database system on the documentary data, called Nuclear Ship Documentary Database, are now under development. (author)

Special purpose materials for fusion application

International Nuclear Information System (INIS)

Scott, J.L.; Clinard, F.W. Jr.; Wiffen, F.W.

1984-01-01

Originally in 1978 the Special Purpose Materials Task Group was concerned with tritium breeding materials, coolants, tritium barriers, graphite and silicon carbide, ceramics, heat-sink materials, and magnet components. Since then several other task groups have been created, so now the category includes only materials for superconducting magnets and ceramics. For the former application copper-stabilized Nb 3 Sn (Ti) insulated with polyimides will meet the general requirements, so that testing of prototype components is the priority task. Ceramics are required for several critical components of fusion reactors either as dielectrics or as a structural material. Components near the first wall will receive exposures of 5 to 20 MW.year/m"2. Other ceramic applications are well behind the first wall, with lower damage levels. Most insulators operate near room temperature, but ceramic blanket structures may operate up to 1000 0 C. Because of a meager data base, one cannot identify optimum ceramics for structural application; but MgAl 2 O 4 is an attractive dielectric material

Accidents on ships in the Danish International Ship register

DEFF Research Database (Denmark)

Ádám, Balázs; Rasmussen, Hanna Barbara

to report accidents causing at least one day off work beyond the day of accident but the first source contains several accidents not fulfilling this criterion, too. Radio Medical is an independent service where all Danish ships may seek medical advice. The data sets were merged by identification number...... of our study is to describe trend of accidents and their contributing factors, with special focus on nationality, occurring in ships under Danish flag in the period 2010-2012. The study used two independent data sources, the Danish Maritime Authority and the Danish Radio Medical. It is mandatory...... to create a single database that has been studied by descriptive statistics and regression analysis. Findings show a stabilised number of accidents in the analysed period. The occurrence of accidents is influenced by nationality. There is a higher frequency of reported injuries found among Danish and other...

Development Factors of Shipping Industry Special Zone to Support Regional Innovation System

Directory of Open Access Journals (Sweden)

Eko Budi Santoso

2014-12-01

Full Text Available The central government has established the industry road map through MP3EI to support the shipbuilding industry. The region of Surabaya, Gresik, Lamongan and Tuban areas will be developed as the national shipping industry. The purpose of this study is to f ormulate the shipbuilding industry development cooperation to support the development of regional innovation systems. The goal and objectives are to identify the type of support the shipbuilding industry in Lamongan, to obtain a general picture of the existing condition of shipbuilding industries and the subsequent descriptive analysis to identify factors that influence the development of the shipbuilding industry. The method is using a theoretical review of the literature and the descriptive analysis of the results of depth interviews with stakeholders in Lamongan. The results of this study are the factors that influence the development of the shipbuilding industry.

Study of Volatility of New Ship Building Prices in LNG Shipping

Directory of Open Access Journals (Sweden)

T. Bangar Raju

2016-12-01

Full Text Available The natural gas market has been expanding in size and has attracted particular attention across the global energy market. Although most natural gas transportation is carried out through pipelines, almost one third of it is done with the help of merchant vessels, capable of carrying liquefied natural gas. These LNG carriers have a special design and thus can be treated as a separate class of global fleet. New vessels are huge capital investments by vessel owning companies and just like other vessel classes; the new shipbuilding prices for the LNG segment continue to be a key aspect in the decision making of business players. Additionally these prices can be volatile as new ship building prices fluctuate with time. This paper attempts to analyse the volatility of new ship building prices of LNG carriers. For the study, the average ship building prices for all the LNG carriers having volume carrying capacity is between 160,000 – 173,000 cbm to be delivered between 2016 – 2019 were taken into account. For the analysis, GARCH and EGARCH methods were applied on the data set. The analysis concluded that there is a great deal of volatility in the new ship building prices of LNG vessels. It was also identified that negative shocks were more persistent the positive shocks.

Utilization of uranium cost/benefit study for nuclear powered merchant ships. Special study

International Nuclear Information System (INIS)

Smith, E.R.

1977-05-01

This study presents a cost/benefit analysis for the utilization of uranium in merchant ships versus the use of uranium for the generation of electricity in central power stations. The study concludes that an alternative naval fuel to oil must be developed for the merchant marine to reduce U.S. dependency upon foreign supplies of a critical fuel. The study further indicates that use of uranium for ship propulsion results in transport of large quantities of needed import/exports while the residual oil saved will generate the same quantity of electricity in a central power station as the uranium used for ship propulsion

Performance Monitoring of Ships

DEFF Research Database (Denmark)

Hansen, Søren Vinther

is used as input to the system and by comparing model and ship behaviour, an index describing the ship’s performance is generated. The work in this thesis is based on data logged through the automation system on board a PostPanmax container ship where data have been logged through a year. A routine...... in the models have been identified. The models used in this work are based on empirical relations or based on regression analyses of model tests and full-scale trials. In order to achieve valid results the conditions where performance is estimated have to be inside the boundaries of the model. Filters have been......The purpose of the research project is to establish a reliable index in the performance evaluation of ships. During operation the ship will experience added resistance due to fouling of hull and propeller. The added resistance will lead to increased fuel consumption and thus increased emissions...

A fuel response model for the design of spent fuel shipping casks

International Nuclear Information System (INIS)

Malinauskas, A.P.; Duffey, T.A.; Einziger, R.E.; Hobbins, R.R.; Jordon, H.; Rashid, Y.R.; Barrett, P.R.; Sanders, T.L.

1989-01-01

The radiological source terms pertinent to spent fuel shipping cask safety assessments are of three distinct origins. One of these concerns residual contamination within the cask due to handling operations and previous shipments. A second is associated with debris (''crud'') that had been deposited on the fuel rods in the course of reactor operation, and a third involves the radioactive material contained within the rods. Although the lattermost source of radiotoxic material overwhelms the others in terms of inventory, its release into the shipping cask, and thence into the biosphere, requires the breach of an additional release barrier, viz., the fuel rod cladding. Hence, except for the special case involving the transport of fuel rods containing previously breached claddings, considerations of the source terms due to material contained in the fuel rods are complicated by the need to address the likelihood of fuel cladding failure during transport. The purpose of this report is to describe a methodology for estimating the shipping cask source terms contribution due to radioactive material contained within the spent fuel rods. Thus, the probability of fuel cladding failure as well as radioactivity release is addressed. 8 refs., 2 tabs

Nuclear powered ships. Findings from a feasibility study

International Nuclear Information System (INIS)

Namikawa, Shunichiro; Maerli, Morten Bremer; Hoffmann, Peter Nyegaard; Brodin, Erik

2011-01-01

Nuclear shipping is attractive for several reasons, one of which is its positive effect on emissions (CO 2 , NOx and SOx). The benefits, however, do not come without risks of possible harmful effects on humans and wildlife. Nuclear ships set themselves apart from conventional ships, as well as from on-shore nuclear power-plants, on several counts. 1) The reactor-unit are non-stationary, and the reactor is subject to the ship motions. 2) Ship reactors must be compact due to space constraints. 3) Special design considerations are required to ensure reactor safety and security, as well as to enable refuelling. 4) A naval nuclear fuel cycle infrastructure for fuel fabrication, handling, and disposal is needed. Technological feasibility of nuclear shipping is by itself inconclusive to a expansion into civilian applications and use. Civilian nuclear propulsion needs to be commercially viable and politically acceptable. Appropriate legislation must be in place, and nuclear shipping concepts with proven safety records and highest possible nuclear proliferation-resistance must be established. Possible 'showstoppers' to a viable nuclear civilian shipping industry are outlined in the paper in view of Political, Technical, Regulatory, Commercial, Safety and Security aspects. Further, different types of ships with different propulsion system are compared in lights of life cycle cost and air emission. (author)

Full-scale tests of spent-nuclear-fuel shipping systems

International Nuclear Information System (INIS)

Yoshimura, H.R.; Huerta, M.

1976-01-01

Sandia Laboratories will be conducting, for the U.S. Energy Research and Development Administration, a series of tests involving spent-nuclear-fuel shipping systems. Large shipping casks in the 20500 to 70000-kg range will be included in the following full-scale tests: (1) Runaway tractor-trailer crash into a solid concrete barrier while carrying a shipping cask. (2) High-speed locomotive grade-crossing impact with a truck carrying a shipping cask. (3) High-speed derailment, collision, and fire involving a special railcar and shipping cask. The hardware and testing procedures for each of the tests are described. The analysis conducted in advance of the tests addresses the modelling technique used and a description of the scale-model tests. Analytical modelling being done before running the full-scale tests is also described. (author)

Applications for special-purpose minerals at a lunar base

Science.gov (United States)

Ming, Douglas W.

1992-01-01

Maintaining a colony on the Moon will require the use of lunar resources to reduce the number of launches necessary to transport goods from the Earth. It may be possible to alter lunar materials to produce minerals or other materials that can be used for applications in life support systems at a lunar base. For example, mild hydrothermal alteration of lunar basaltic glasses can produce special-purpose minerals (e.g., zeolites, smectites, and tobermorites) that in turn may be used in life support, construction, waste renovation, and chemical processes. Zeolites, smectites, and tobermorites have a number of potential applications at a lunar base. Zeolites are hydrated aluminosilicates of alkali and alkaline earth cations that possess infinite, three-dimensional crystal structures. They are further characterized by an ability to hydrate and dehydrate reversibly and to exchange some of their constituent cations, both without major change of structure. Based on their unique absorption, cation exchange, molecular sieving, and catalytic properties, zeolites may be used as a solid support medium for the growth of plants, as an adsorption medium for separation of various gases (e.g., N2 from O2), as catalysts, as molecular sieves, and as a cation exchanger in sewage-effluent treatment, in radioactive waste disposal, and in pollution control. Smectites are crystalline, hydrated 2:1 layered aluminosilicates that also have the ability to exchange some of their constituent cations. Like zeolites, smectites may be used as an adsorption medium for waste renovation, as adsorption sites for important essential plant growth cations in solid support plant growth mediums (i.e., 'soils'), as cation exchangers, and in other important application. Tobermorites are cystalline, hydrated single-chained layered silicates that have cation-exchange and selectivity properties between those of smectites and most zeolites. Tobermorites may be used as a cement in building lunar base structures, as

46 CFR 11.1101 - Purpose of rules.

Science.gov (United States)

2010-10-01

... passenger ships as defined in § 10.1103. ... 46 Shipping 1 2010-10-01 2010-10-01 false Purpose of rules. 11.1101 Section 11.1101 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN REQUIREMENTS FOR OFFICER...

Assessment of efficiency of functioning the infocommunication systems a special purpose in the conditions of violation quality of relevance information

Science.gov (United States)

Parinov, A. V.; Korotkikh, L. P.; Desyatov, D. B.; Stepanov, L. V.

2018-03-01

The uniqueness of information processing mechanisms in special-purpose infocommunication systems and the increased interest of intruders lead to an increase in the relevance of the problems associated with their protection. The paper considers the issues of building risk-models for the violation of the relevance and value of information in infocommunication systems for special purposes. Also, special attention is paid to the connection between the qualities of relevance and the value of information obtained as a result of the operation of infocommunication systems for special purposes. Analytical expressions for the risk and damage function in the time range in special-purpose infocommunication systems are obtained, which can serve as a mathematical basis for risk assessment. Further, an analytical expression is obtained to assess the chance of obtaining up-to-date information in the operation of infocommunication systems up to the time the information quality is violated. An analytical expression for estimating the chance can be used to calculate the effectiveness of a special-purpose infocommunication system.

Radiation protection studies for the SHiP facility

CERN Document Server

Strabel, Claudia Christina; Vincke, Helmut

2015-01-01

The enlarged scope of the recently proposed experiment to search for Heavy Neutral Leptons, SPSC-EOI-010, is a general purpose fixed target facility which in the initial phase is aimed at a general Search for Hidden Particles (SHiP) as well as tau neutrino physics. This report summarizes radiation protection considerations for the SHiP facility and the primary beam extraction for SHiP.

VARIABILITY OF AMYLOSE AND AMYLOPECTIN IN WINTER WHEAT AND SELECTION FOR SPECIAL PURPOSES

Directory of Open Access Journals (Sweden)

Nikolina Weg Krstičević

2015-06-01

Full Text Available The aim of this study was to investigate the variability of amylose and amylopectin in 24 Croatian and six foreign winter wheat varieties and to detect the potential of these varieties for special purposes. Starch composition analysis was based on the separation of amylose and amylopectin and the determination of their amounts and ratios. Analysis of the amount of amylose and amylopectin determined statistically highly significant differences between the varieties. The tested varieties are mostly bread wheat of different quality which have the usual content of amylose and amylopectin. Some varieties were identified among them with high amylopectin and low amylose content and one variety with high amylose content. They have the potential in future breeding programs and selection for special purposes.

47 CFR 80.53 - Application for a portable ship station license.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Application for a portable ship station license... SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Applications and Licenses § 80.53 Application for a portable ship station license. The Commission may grant a license permitting operation of a...

46 CFR 153.30 - Special area endorsement.

Science.gov (United States)

2010-10-01

... endorsement. The Coast Guard endorses the Certificate of Inspection of a United States ship allowing it to operate in special areas if the ship owner— (a) Requests the endorsement following the procedures in § 153... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING...

Using Face Recognition System in Ship Protection Process

Directory of Open Access Journals (Sweden)

Miroslav Bača

2006-03-01

Full Text Available The process of security improvement is a huge problem especiallyin large ships. Terrorist attacks and everyday threatsagainst life and property destroy transport and tourist companies,especially large tourist ships. Every person on a ship can berecognized and identified using something that the personknows or by means of something the person possesses. The bestresults will be obtained by using a combination of the person'sknowledge with one biometric characteristic. Analyzing theproblem of biometrics in ITS security we can conclude that facerecognition process supported by one or two traditional biometriccharacteristics can give very good results regarding ship security.In this paper we will describe a biometric system basedon face recognition. Special focus will be given to crew member'sbiometric security in crisis situation like kidnapping, robbelyor illness.

46 CFR 153.1000 - Special operating requirements for cargoes reactive with water.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Special operating requirements for cargoes reactive with water. 153.1000 Section 153.1000 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED... MATERIALS Operations Special Cargo Procedures § 153.1000 Special operating requirements for cargoes reactive...

8 CFR 252.5 - Special procedures for deserters from Spanish or Greek ships of war.

Science.gov (United States)

2010-01-01

... Spanish or Greek ships of war. 252.5 Section 252.5 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY... Greek ships of war. (a) General. Under E.O. 11267 of January 19, 1966 (31 FR 807) and 28 CFR 0.109, and... a ship of war of that government, while in any port of the United States, and on proof by the...

Internationalisation Within Liner Shipping

DEFF Research Database (Denmark)

Prockl, Günter; Kinra, Aseem; Kotzab, Herbert

2018-01-01

, the degree of internationalisation, measured on the basis of sea-oriented operations, differs from that measured according to land-oriented front-end marketing and sales activities. The purpose of this study is to further examine the internationalisation patterns of shipping lines. An examination...... of the front-end activities and the structures of leading container-shipping companies is conducted. The sales office networks of the sector’s 20 largest companies worldwide (by twenty-foot equivalent unit capacity) are analysed as key indicators. The numbers of sales offices are measured by analysing...... the websites of the sample (20 companies), as well as annual reports and other publicly available data sources. The findings show that not all shipping companies are international, by virtue of the industry. While it is difficult to observe differences in the overall patterns of the sales networks at a macro...

Green Shipping Practices of Shipping Firms

Directory of Open Access Journals (Sweden)

Young-Tae Chang

2017-05-01

Full Text Available The primary objective of this study is to provide an empirical research using structural equation modeling to identify the factors that motivate shipping firms to adopt green shipping practices (GSP. Furthermore, it also examines if adopting GSP can enhance the shipping firms’ environmental and productivity performance. The findings show that shipping firms are motivated to adopt GSP mostly by industrial norms set by institutionalized associations. They are also motivated by customers’ demand for environmental friendliness and their own strategy to make good image. Unlike our expectation, government regulations and international environmental laws are not significant in influencing shipping firms to adopt GSP. Moreover, adoption of green shipping practices can improve the environmental and productivity performance of the shipping firms.

Numerical Study on the Effect of Buffer Bow Structure in Ship-to-ship Collisions

DEFF Research Database (Denmark)

Yamada, Yasuhira; Endo, Hisayoshi; Pedersen, Preben Terndrup

2005-01-01

tankers, the introduction of buffer bulbous bows has been proposed. Relatively soft buffer bows absorb part of the kinetic energy of the striking ship before penetrating the inner hull of the struck vessel. The purpose of the present paper is to verify the effectiveness of a prototype buffer bulbous bow......) and the forward velocity of the struck ship on the collapse mode of the bow of the striking vessel are investigated. Collapse modes, contact forces and energy absorption capabilities of the buffer bows are compared with those of conventional bows....

Revision of the basic plans of the first nuclear-powered ship development

International Nuclear Information System (INIS)

1978-01-01

Along with the law for Japan Nuclear Ship Development Agency, the basic plans of development of the first nuclear-powered ship have been revised. After explaining the basic policy concerning the matter, the development program is described as follows: ship type/kind, nuclear power plant, construction, training of ship crew, experimental voyage, compilation of the development results, and works after the experimental voyage. The first nuclear-powered ship of about 8,000 tons gross tonnage, 10,000 horsepower main engine output, and about 16 knots, sea speed will be the ship for special cargo transport and crew training. A pressurized water reactor is used for the power plant. Following the repair of shielding and the overall inspection of safety, the ship is to be completed as early as possible. After completion of the ship, its experimental voyage will be carried out, aiming at the aspects of operational familiarization, ship performance, reliability, port call experience, etc. (Mori, K

Ships as future floating farm systems?

Science.gov (United States)

Moustafa, Khaled

2018-04-03

Environmental and agriculture challenges such as severe drought, desertification, sprawling cities and shrinking arable lands in large regions in the world compel us to think about alternative and sustainable farming systems. Ongoing projects to build floating cities in the sea suggest that building specific ships for farming purposes (as farming ships or farming boats) would also be attainable to introduce new farming surfaces and boost food production worldwide to cope with food insecurity issues.

Ergonomical valorization of working spaces in multipurpose ships.

Science.gov (United States)

Seif, Mehdi; Degiuli, Nastija; Muftić, Osman

2003-06-01

In this work it is shown how anthropological data are among the most needed factors in ergonomical valorization of crew working spaces. Ship's working or living environment involves many unique human factors, which should be specially considered in our case as limitation of crew space. In this work we have chosen ships of different years of construction to prove this tendency. As a micro study, the work posture analysis using the pulling force experiment is performed in order to determine lumbar moment, intra-abdominal pressure as a measure of evaluating and comparing different crew work positions. As a macro-study, the "crew work posture analysis" was carried out by the use of the data collected from real cases. The most probable work postures in different spaces of a ship are classified and after some corrections of the work place the profile and its grade were determined. The "statistical analysis for real ship's spaces" is also performed, as well as another macro study, in order to show some real designed ship spaces from the point of view of the allocated volume.

Nonparametric cost evaluation of the Department of Defense's small parcel shipping procedures

OpenAIRE

Murphy, Douglas M.

1995-01-01

The current Department of Defense shipping procedures do not encourage Installation Transportation Officers (ITOs) to use small parcel carriers (SPCs) for domestic ground transportation. There is still a significant amount of small parcels being shipped by the more expensive common carriers used for large Truckload and Less-Than-Truckload freight. The first purpose of this thesis is to show small parcels can be shipped more efficiently by SPCs than common carriers. The second purpose is to pr...

9. Anti-vibration Design of a Passenger Ship

OpenAIRE

Kazuo, Umezaki; Mikihiro, Kobayashi; Hioshi Kohkawa, Kohkawa; Hiroyuki, Mizuno; Shin-ichi, Nishimura; Takayuki, Okayasu; Kazuhisa, Yanagi; Mitsubishi Heavy Industries. Ltd; Mitsubishi Heavy Industries, Ltd. Kobe Shipyard and Machinery Works; Mitsubishi Heavy Industries, Ltd. Kobe Shipyard and Machinery Works; Mitsubishi Heavy Industries, Ltd. Kobe Shipyard and Machinery Works; Mitsubishi Heavy Industries. Ltd; Mitsubishi Heavy Industries, Ltd. Kobe Shipyard and Machinery Works; Mitsubishi Heavy Industries, Ltd. Nagasaki Research and Development Center

1992-01-01

One of the most difficult tasks in designing a passenger ship is to make it vibration free while keeping the hull structure very light for stability reason. In order to accomplish this for the 23,000 GT cruise ship the particulars of which are shown in Table l, special attention was paid to the alignment of structures during layout design, and analyses and experiments of vibration were carried out through every stage of design and construction. This paper describes outlines of these tasks and...

Evaluation of Differentiation Strategy in Shipping Enterprises with Simulation Model

Science.gov (United States)

Vaxevanou, Anthi Z.; Ferfeli, Maria V.; Damianos, Sakas P.

2009-08-01

The present inquiring study aims at investigating the circumstances that prevail in the European Shipping Enterprises with special reference to the Greek ones. This investigation is held in order to explore the potential implementation of strategies so as to create a unique competitive advantage [1]. The Shipping sector is composed of enterprises that are mainly activated in the following three areas: the passenger, the commercial and the naval. The main target is to create a dynamic simulation model which, with reference to the STAIR strategic model, will evaluate the strategic differential choice that some of the shipping enterprises have.

Shielding designs and tests of a new exclusive ship for transporting spent nuclear fuels

International Nuclear Information System (INIS)

Ono, M.; Ito, D.; Kitano, T.; Ueki, K.; Akiyama, H.; Obara, I.; Sanui, T.

2000-01-01

The Rokuei-Maru, a ship built specially for the transport of spent nuclear fuels in casks, was launched April in 1996. She is the first ship to comply with special Japanese regulations, KAISA 520, based on the INF code. DOT3.5 and MCNP-4A were used for the evaluation of dose equivalent rates of her shielding structures. On-board gamma-ray shielding tests were executed to confirm the effectiveness of the ship's shielding performance. The tests confirmed that effective shielding has been achieved and the dose equivalent rate in the accommodation and other inhabited spaces is sufficiently lower than the regulated limitations. This was achieved by employing the appropriate calculation methods and shielding materials. (author)

7 CFR 905.148 - Reports of special purpose shipments under certificates of privilege.

Science.gov (United States)

2010-01-01

... (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts... Regulations Non-Regulated Fruit § 905.148 Reports of special purpose shipments under certificates of privilege... name and address of the shipper or shippers; name and address of the certified organic Florida citrus...

37 CFR 201.15 - Special handling of pending claims requiring expedited processing for purposes of litigation.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Special handling of pending... PROVISIONS § 201.15 Special handling of pending claims requiring expedited processing for purposes of... compelling need for the service exists due to pending or prospective litigation, customs matters, or contract...

Shaping the Strength of Cast Rocker Arm for Special Purpose Vehicle

OpenAIRE

Żuczek R.; Pysz S.; Maj M.; Piekło J.

2015-01-01

The article discusses the weldment to casting conversion process of rocker arm designed for operation in a special purpose vehicle to obtain a consistency of objective functions, which assume the reduced weight of component, the reduced maximum effort of material under the impact of service loads achieved through topology modification for optimum strength distribution in the sensitive areas, and the development of rocker arm manufacturing technology. As a result of conducted studies, the unit...

The potential risks from Russian nuclear ships. NKS-SBA-1 status report

Energy Technology Data Exchange (ETDEWEB)

Oelgaard, P.L. [Risoe National Lab., Roskilde (Denmark)

2001-11-01

A review is given of the information available on the Russian nuclear ships including submarines, cruisers and ice-breaking ships with special emphasis on the vessels of the Northern Fleet and the Russian icebreakers. A significant part of these ships has today been taken out of active service, and they are in various stages of decommissioning. Information on the decommissioned vessels, their storage sites and the procedures planned for the further decommissioning works is discussed. The handling of spent nuclear fuel is also considered. The various types of accidents, which might occur with these ships, operational as well as decommissioned, are considered, and examples of actual accidents with operational vessels are presented. The types of accidents considered include criticality accidents, loss-of-coolant accidents, fires/explosions and sinking. Some measures taken by the Russians to avoid such accidents are discussed. The special problems connected to the two decommissioned submarines of the Northern Fleet, which have damaged cores, are mentioned. In appendices data on the Russian nuclear vessels are presented. (au)

Helicopter-Ship Qualification Testing

NARCIS (Netherlands)

Hoencamp, A.

2015-01-01

The goal of this research project is to develop a novel test methodology which can be used for optimizing cost and time efficiency of helicopter-ship qualification testing without reducing safety. For this purpose, the so-called “SHOL-X” test methodology has been established, which includes the

Impact of regional special purpose local option sales tax (SPLOST) initiatives on county infrastructure.

Science.gov (United States)

2011-10-01

In response to fiscal constraints on transportation funding and the need to address transportation problems and create regional solutions, Georgia is proposing a 1% regional Special-Purpose Local-Option Sales Tax (SPLOST). To accommodate this initiat...

Study of the Accident Environment During Sea Transport of Nuclear Material: Analysis of an Engine-room Fire on a Purpose-built Ship (invited paper)

International Nuclear Information System (INIS)

Yamamoto, K.; Kitamura, T.; Shibata, K.; Ouchi, Y.; Ito, T.; Hohnstreiter, G.F.; Pierce, J.D.; Koski, J.A.; Dukart, R.K.

2000-01-01

The programme goal was to show that the IAEA safe transport regulations adequately cover the thermal effects of an engine-room fire on plutonium transport packages stowed aboard a purpose-built ship. The packages are stored in transport containers located in a cargo hold of the ship. For this study, it was assumed that the packages in No 5 hold, adjacent to an engine-room, could be subject to heating due to a fire in the engine-room. The No 5 hold and the engine-room are separated by a water-filled bulkhead. This study addressed the heat transfer from an engine-room fire that could heat and evaporate water out of the water-filled bulkhead and the resulting temperature conditions around the packages and inside the packages near their elastometric seals. (author)

Numerical calculation of the conductivity of percolation clusters and the use of special purpose computers

International Nuclear Information System (INIS)

Herrmann, H.J.

1989-01-01

Electrical conductivity diffusion or phonons, have an anomalous behaviour on percolation clusters at the percolation threshold due to the fractality of these clusters. The results that have been found numerically for this anomalous behaviour are reviewed. A special purpose computer built for this purpose is described and the evaluation of the data from this machine is discussed

A Method to Assess Transverse Vibration Energy of Ship Propeller Shaft for Diagnostic Purposes

Directory of Open Access Journals (Sweden)

Korczewski Zbigniew

2017-12-01

Full Text Available The article discusses a key problem of ship propulsion system vibration diagnostics, which concerns assessing this part of mechanical energy transmitted from the main engine to the ship propeller which is dissipated due to propeller shaft vibration. A simplified calculation model is proposed which allows the total energy of the generated torsional vibration to be assessed from the shaft deflection amplitude measured at the mind-span point between the supports. To verify the developed model, pilot tests were performed on the laboratory rotational mechanical system test rig. In those tests, cyclic bending moment was applied to a unified (cylindrical material sample, which modelled, at an appropriate scale, structural and functional properties of a real propeller shaft.

Radar imagery from the 1994 Lock Linnhe ship wake experiment

Energy Technology Data Exchange (ETDEWEB)

Mullenhoff, C.J.; Lehman, S.K.; Jones, H. [Lawrence Livermore National Lab., CA (United States)] [and others

1994-11-15

The 1994 Loch Linnhe radar ocean imaging trials were held from September 4 through September 17. Two ships were used: the R.V. Colonel Templer, and the RMAS Collie. Thorn EMI, Inc., fielded a dual band, dual polarization radar on a hillside overlooking the loch. A primary purpose of the experiment was to obtain highly visible images of ship generated internal waves. Presented here is imagery for a few of the good ship runs, as well as a study of the environment of the visibility of ship generated internal waves.

Ship speed optimization: Concepts, models and combined speed-routing scenarios

DEFF Research Database (Denmark)

Psaraftis, Harilaos N.; Kontovas, Christos A.

2014-01-01

The purpose of this paper is to clarify some important issues as regards ship speed optimization at the operational level and develop models that optimize ship speed for a spectrum of routing scenarios in a single ship setting. The paper's main contribution is the incorporation of those fundament...... parameters and other considerations that weigh heavily in a ship owner's or charterer's speed decision and in his routing decision, wherever relevant. Various examples are given so as to illustrate the properties of the optimal solution and the various trade-offs that are involved....

The merchant shipping (dangerous goods) (amendment) rules 1980 No. 789

International Nuclear Information System (INIS)

1980-01-01

These Rules amend the Merchant Shipping Rules 1978 and revoke the Merchant Shipping (Dangerous Goods) (Amendment) Rules 1979. The purpose of this amendment is to update the references to the 1978 Report of the Department of Trade's Standing Advisory Committee on the Carriage of Dangerous Goods in Ships (the Blue Book) and the 1977 Edition of the International Maritime Dangerous Goods Code of IMCO (the IMDG Code), referred to in the 1978 Rules. The amendments concern, inter alia, marking of packages on board ship which contain dangerous goods, including radioactive materials (NEA) [fr

GRAPE-5: A Special-Purpose Computer for N-body Simulation

OpenAIRE

Kawai, Atsushi; Fukushige, Toshiyuki; Makino, Junichiro; Taiji, Makoto

1999-01-01

We have developed a special-purpose computer for gravitational many-body simulations, GRAPE-5. GRAPE-5 is the successor of GRAPE-3. Both consist of eight custom pipeline chips (G5 chip and GRAPE chip). The difference between GRAPE-5 and GRAPE-3 are: (1) The G5 chip contains two pipelines operating at 80 MHz, while the GRAPE chip had one at 20 MHz. Thus, the calculation speed of the G5 chip and that of GRAPE-5 board are 8 times faster than that of GRAPE chip and GRAPE-3 board. (2) The GRAPE-5 ...

46 CFR 7.1 - General purpose of boundary lines.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false General purpose of boundary lines. 7.1 Section 7.1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PROCEDURES APPLICABLE TO THE PUBLIC BOUNDARY LINES General § 7.1 General purpose of boundary lines. The lines in this part delineate the application of the...

Treecode with a Special-Purpose Processor

Science.gov (United States)

Makino, Junichiro

1991-08-01

We describe an implementation of the modified Barnes-Hut tree algorithm for a gravitational N-body calculation on a GRAPE (GRAvity PipE) backend processor. GRAPE is a special-purpose computer for N-body calculations. It receives the positions and masses of particles from a host computer and then calculates the gravitational force at each coordinate specified by the host. To use this GRAPE processor with the hierarchical tree algorithm, the host computer must maintain a list of all nodes that exert force on a particle. If we create this list for each particle of the system at each timestep, the number of floating-point operations on the host and that on GRAPE would become comparable, and the increased speed obtained by using GRAPE would be small. In our modified algorithm, we create a list of nodes for many particles. Thus, the amount of the work required of the host is significantly reduced. This algorithm was originally developed by Barnes in order to vectorize the force calculation on a Cyber 205. With this algorithm, the computing time of the force calculation becomes comparable to that of the tree construction, if the GRAPE backend processor is sufficiently fast. The obtained speed-up factor is 30 to 50 for a RISC-based host computer and GRAPE-1A with a peak speed of 240 Mflops.

Analysis of a ship-to-ship collision

International Nuclear Information System (INIS)

Porter, V.L.; Ammerman, D.J.

1996-01-01

Sandia National Laboratories is involved in a safety assessment for the shipment of radioactive material by sea. One part of this study is investigation of the consequences of ship-to-ship collisions. This paper describes two sets of finite element analyses performed to assess the structural response of a small freighter and the loading imparted to radioactive material (RAM) packages during several postulated collision scenarios with another ship. The first series of analyses was performed to evaluate the amount of penetration of the freighter hull by a striking ship of various masses and initial velocities. Although these analyses included a representation of a single RAM package, the package was not impacted during the collision so forces on the package could not be computed. Therefore, a second series of analyses incorporating a representation of a row of seven packages was performed to ensure direct package impact by the striking ship. Average forces on a package were evaluated for several initial velocities and masses of the striking ship. In addition to. providing insight to ship and package response during a few postulated ship collisions scenarios, these analyses will be used to benchmark simpler ship collision models used in probabilistic risk assessment analyses

Optimization of ship inner shell to improve the safety of seagoing transport ship

Directory of Open Access Journals (Sweden)

Yan-Yun YU

2013-09-01

Full Text Available A practical Ship Inner Shell Optimization Method (SISOM, the purpose of which is to improve the safety of the seagoing transport ship by decreasing the maximum Still Water Bending Moment (SWBM of the hull girder under all typical loading conditions, is presented in this paper. The objective of SISOM is to make the maximum SWBM minimum, and the section areas of the inner shell are taken as optimization variables. The main requirements of the ship performances, such as cargo hold capacity, propeller and rudder immersion, bridge visibility, damage stability and prevention of pollution etc., are taken as constraints. The penalty function method is used in SISOM to change the above nonlinear constraint problem into an unconstrained one, which is then solved by applying the steepest descent method. After optimization, the optimal section area distribution of the inner shell is obtained, and the shape of inner shell is adjusted according to the optimal section area. SISOM is applied to a product oil tanker and a bulk carrier, and the maximum SWBM of the two ships is significantly decreased by changing the shape of inner shell plate slightly. The two examples prove that SISOM is highly efficient and valuable to engineering practice.

On Grounding of Fast Ships

DEFF Research Database (Denmark)

Simonsen, Bo Cerup; Pedersen, Preben Terndrup

1997-01-01

The paper deals with analysis of grounding of high-speed crafts. It is the purpose to present a comprehensive mathematical model for calculation of the overall dynamic ship response during grounding. This procedure is applied to derive the motions, the time varying sectional forces and the local...... loads during grounding on plane, sloping, sandy bottoms for six different designs of fast monohull ships made from steel, aluminium or GRP sandwich materials. The results show that the effect of the hull flexibility is to reduce the overall dynamic sectional loads on the hull girder. The considered...... numerical examples also indicate that, even with impact speeds of 40 knots against a 1:10 sloping bottom, the global strength of the hull girder is not exceeded by the grounding induced loads.For the local deformation of high-speed ship hulls at the point of contact with the ground, the paper presents...

Surveying, Modeling and 3d Representation of a wreck for Diving Purposes: Cargo Ship "vera"

Science.gov (United States)

Ktistis, A.; Tokmakidis, P.; Papadimitriou, K.

2017-02-01

This paper presents the results from an underwater recording of the stern part of a contemporary cargo-ship wreck. The aim of this survey was to create 3D representations of this wreck mainly for recreational diving purposes. The key points of this paper are: a) the implementation of the underwater recording at a diving site; b) the reconstruction of a 3d model from data that have been captured by recreational divers; and c) the development of a set of products to be used by the general public for the ex situ presentation or for the in situ navigation. The idea behind this project is to define a simple and low cost procedure for the surveying, modeling and 3D representation of a diving site. The perspective of our team is to repeat the proposed methodology for the documentation and the promotion of other diving sites with cultural features, as well as to train recreational divers in underwater surveying procedures towards public awareness and community engagement in the maritime heritage.

Designed for extreme weather conditions. Installation ship for wind power plants; Fuer extreme Wetterlagen ausgelegt. Installationsschiff fuer Windenergieanlagen

Energy Technology Data Exchange (ETDEWEB)

Wedel, Henning von [Waertsilae Deutschland GmbH, Hamburg (Germany)

2012-02-13

In recent years, Waertsilaehas gained a leadership position of special ships for the installation of wind turbines. The high-performance turbine installation ship Seawolf (HPTIV) is the latest in this series.

Design of special purpose database for credit cooperation bank business processing network system

Science.gov (United States)

Yu, Yongling; Zong, Sisheng; Shi, Jinfa

2011-12-01

With the popularization of e-finance in the city, the construction of e-finance is transfering to the vast rural market, and quickly to develop in depth. Developing the business processing network system suitable for the rural credit cooperative Banks can make business processing conveniently, and have a good application prospect. In this paper, We analyse the necessity of adopting special purpose distributed database in Credit Cooperation Band System, give corresponding distributed database system structure , design the specical purpose database and interface technology . The application in Tongbai Rural Credit Cooperatives has shown that system has better performance and higher efficiency.

77 FR 1501 - Special Purpose Permit Application; Draft Environmental Assessment; Hawaii-Based Shallow-Set...

Science.gov (United States)

2012-01-10

...-FF01M01000] Special Purpose Permit Application; Draft Environmental Assessment; Hawaii-Based Shallow-Set... the operation of the Hawaii-based shallow-set longline fishery that targets swordfish (Xiphias gladius... albatross, by NMFS in its regulation of the shallow-set longline fishery based in Hawaii. This fishery...

77 FR 50153 - Special Purpose Permit Application; Hawaii-Based Shallow-Set Longline Fishery; Final...

Science.gov (United States)

2012-08-20

...-FF01M01000] Special Purpose Permit Application; Hawaii-Based Shallow-Set Longline Fishery; Final... of the Hawaii-based shallow-set longline fishery, which targets swordfish. After evaluating several... take of seabirds in the shallow-set longline fishery based in Hawaii. The analysis of alternatives is...

Fuel exchanger for nuclear ships

International Nuclear Information System (INIS)

Suda, Koji; Kanbara, Takahisa; Watanabe, Masaharu.

1984-01-01

Purpose: To prevent enviromental contamination landing radioactive materials from the inside of a ship. Constitution: A provisional cabin having a shape covering a reactor hatch and a hatch cover is disposed on the upper deck of a ship body. A ceiling shutter is disposed to the cabin. A protection cylinder having a shutter and a filter fan is attached on the cabin. Materials to be discharged out of the ship are transported to a fuel exchange tower on land by using a crane while being contained in the protection cylinder with the shutter being closed. The protection cylinder is connected by means of a wire rope to a loop-wheel machine which disposed on the trolly of a crane. While the bellows through which the suspending wire for the discharged products passes is perforated, since the inside of the cylinder is depressurized by a filter fan, there is no air leakage through the perforation to the outside. (Ikeda, J.)

Towards Real Time Simulation of Ship-Ship Interaction

DEFF Research Database (Denmark)

Lindberg, Ole; Bingham, Harry B.; Engsig-Karup, Allan Peter

2012-01-01

We present recent and preliminary work directed towards the development of a simplified, physics-based model for improved simulation of ship-ship interaction that can be used for both analysis and real-time computing (i.e. with real-time constraints due to visualization). The goal is to implement...... accurate (realistic) and much faster ship-wave and ship-ship simulations than are currently possible. The coupling of simulation with visualization should improve the visual experience such that it can be perceived as more realistic in training. Today the state-of-art in real-time ship-ship interaction...... is for efficiency reasons and time-constraints in visualization based on model experiments in towing tanks and precomputed force tables. We anticipate that the fast, and highly parallel, algorithm described by Engsig-Karup et al. [2011] for execution on affordable modern high-throughput Graphics Processing Units...

Modelling the Dynamics of Ships with Different Propulsion Systems for Control Purpose

Directory of Open Access Journals (Sweden)

Gierusz Witold

2016-01-01

Full Text Available Two different propulsion systems are analyzed from point of view of future control applications. The traditional one consists of a pushing single screw propeller and a blade rudder. The other system is based on pod (pods: pulling or pushing ones. The equations describing forces and moments generated in both systems, are presented. Exemplary results of a simulation in comparison to the real-time experiments for two ships are also shown.

Placing the special trains issue in perspective

International Nuclear Information System (INIS)

Rhoads, R.E.; DeSteese, J.G.; Loscutoff, W.V.; Chais, M.

1978-01-01

The Association of American Railroads has proposed changes in the way railroads handle shipments of radioactive materials. These changes are embodied in a set of recommended operating practices that would require shipments of spent fuel and radioactive waste to be moved only in special train service. The proposed operating practices include a 35 mph maximum speed restriction, a passing restriction and a no-other freight restriction. Shippers of radioactive materials oppose the imposition of these operating practices. The special train issue is currently being argued in hearings before the Interstate Commerce Commission. The history and current status of these hearings are reviewed. Pacific Northwest Laboratories has undertaken a study to provide perspective on the safety and economic factors related to the use of special trains for shipping spent fuel. The results of this study for the amount of spent fuel anticipated to be shipped in 1986 are reviewed. The safety analysis determines the frequencies and severities of accidents for conventional freight trains and compares these to extrapolated frequencies and severities of accidents for conventional freight trains subject to the special train operating restrictions. Results of the study show that the adoption of special trains and attendant operating restrictions has limited potential for improving safety during shipment. The economic analysis compares the cost of spent fuel shipments made by special train and by conventional freight train service.Results of the economics phase of the study show that the use of special trains will most likely increase the cost of shipments by about 50%, although under certain circumstances shipping costs for spent fuel by special trains may be up to 20% lower than by conventional train service. Possible methods to resolve the special train issue are explored

PROJECT EVALUATION OF TECHNICAL CONDITION OF SHIP STRUCTURES WITH USE OF INFORMATION RETRIEVAL SYSTEMS

Directory of Open Access Journals (Sweden)

Юлия Алексеевна КАЗИМИРЕНКО

2015-06-01

Full Text Available The mechanisms for evaluation of technical conditions of ship constructions were investigated and was developed a new specialized informational and search system for the collection, analysis and processing the defects of new materials during the designing, construction, operation of ships and floating structures for transportation of goods 1, 4, 6-8 classes of danger.

The shipping man adventures in ship finance

CERN Document Server

McCleery, Matthew

2013-01-01

When restless New York City hedge fund manager Robert Fairchild watches the Baltic Dry Cargo Index plunge 97%, registering an all-time high and a 25-year low within the span of just six months, he decides to buy a ship. Immediately fantasizing about naming a vessel after his wife, carrying a string of worry beads and being able to introduce himself as a "shipowner" at his upcoming college reunion, Fairchild immediately embarks on an odyssey into the most exclusive, glamorous and high stakes business in the world. From pirates off the coast of Somalia and on Wall Street to Greek and Norwegian shipping magnates, the education of Robert Fairchild is an expensive one. In the end, he loses his hedge fund, but he gains a life - as a Shipping Man. Part fast paced financial thriller, part ship finance text book, The Shipping Man is 310 pages of required reading for anyone with an interest in capital formation for shipping.

Fuel exchanging machine for a nuclear ship

International Nuclear Information System (INIS)

Hayashi, Tetsuji.

1984-01-01

Purpose: To prevent atmospheric contaminations upon fuel exchange thereby keep the environmental circumstance clean in the periphery of the nuclear ship. Constitution: A nuclear reactor container is disposed to the inside of a containing vessel in the ship body and a shutter is mounted to the upper opening of the ship body. Further, a landing container having a bottom opening equipped with shutter for alingning the upper opening equipped with shuuter of the ship is elevatably suspended to the trolley of a crane by way of a wire rope and a winch, and a fuel exchange cask is elevatably disposed to the inside of the landing container. Further, airs in the inside of the container is adapted to be discharged externally through a filter by means of a blower and the inside is kept at a negative pressure. Thus, since the containing vessel is covered with the landing container upon fuel exchanging operation, atmospheric contamination can be prevented sufficiently. (Sekiya, K.)

Are nuclear ships environmentally safer than conventionally powered ships

International Nuclear Information System (INIS)

Bone, C.A.; Molgaard, C.A.; Helmkamp, J.C.; Golbeck, A.L.

1988-01-01

An epidemiologic analysis was conducted to determine if risk of hospitalization varied by age, ship type, or occupation between nuclear and conventional powered ship crews in the U.S. Navy. Study cohorts consisted of all male enlisted personnel who served exclusively aboard conventional or nuclear powered aircraft carriers and cruisers during the years 1975-1979; cases were those men hospitalized during this period (N = 48,242). Conventional ship personnel showed significantly elevated rates of injury and disease when compared to nuclear ship personnel. The largest relative risks by age occurred for conventional ship crewmen less than 30 years old. Seaman, logistics (supply), and healthcare personnel serving aboard conventional ships comprised the occupational groups exhibiting the highest hospitalization rate differentials. The results strongly suggest that nuclear ships provide a healthier, safer working and living environment than conventional ships

Shipping

NARCIS (Netherlands)

Wijnolst, N.; Wergeland, T.

1996-01-01

Shipping is a multi-faceted industry which is rather complex to define from an academic point of view. This book attempts to grasp these complexities and provide the reader with an overview of the main topics and terminology in shipping. The book is based on material from our courses in shipping at

A special purpose computer for the calculation of the electric conductivity of a random resistor network

International Nuclear Information System (INIS)

Hajjar, Mansour

1987-01-01

The special purpose computer PERCOLA is designed for long numerical simulations on a percolation problem in Statistical Mechanics of disordered media. Our aim is to improve the actual values of the critical exponents characterizing the behaviour of random resistance networks at percolation threshold. The architecture of PERCOLA is based on an efficient iterative algorithm used to compute the electric conductivity of such networks. The calculator has the characteristics of a general purpose 64 bits floating point micro-programmable computer that can run programs for various types of problems with a peak performance of 25 Mflops. This high computing speed is a result of the pipeline architecture based on internal parallelism and separately micro-code controlled units such as: data memories, a micro-code memory, ALUs and multipliers (both WEITEK components), various data paths, a sequencer (ANALOG DEVICES component), address generators and a random number generator. Thus, the special purpose computer runs percolation problem program 10 percent faster than the supercomputer CRAY XMP. (author) [fr

UTV Expansion Pack - Special-Purpose Rank Revealing Algorithms (version 1.0 for Matlab 6.5)

DEFF Research Database (Denmark)

Fierro, Ricardo D.; Hansen, Per Christian

This collection of Matlab software supplements and complements the package UTV Tools from 1999, and includes implementations of special-purpose rank-revealing algorithms developed since the publication of the original package. We provide algorithms for computing and modifying symmetric rank...

Shaping the Strength of Cast Rocker Arm for Special Purpose Vehicle

Directory of Open Access Journals (Sweden)

Żuczek R.

2015-09-01

Full Text Available The article discusses the weldment to casting conversion process of rocker arm designed for operation in a special purpose vehicle to obtain a consistency of objective functions, which assume the reduced weight of component, the reduced maximum effort of material under the impact of service loads achieved through topology modification for optimum strength distribution in the sensitive areas, and the development of rocker arm manufacturing technology. As a result of conducted studies, the unit weight of the item was reduced by 25%, and the stress limit values were reduced to a level guaranteeing safe application.

What Is the Purpose? Reflections on Inclusion and Special Education from a Capability Perspective

Science.gov (United States)

Reindal, Solveig Magnus

2010-01-01

This article investigated what the capability approach developed by Amartya Sen and Martha Nussbaum can contribute to the issue of inclusion as a new theoretical framework for special education. By posing the question: "What is the purpose of inclusion?", I have proposed to answer this query by investigating how the capability approach is able to…

SURVEYING, MODELING AND 3D REPRESENTATION OF A WRECK FOR DIVING PURPOSES: CARGO SHIP “VERA”

Directory of Open Access Journals (Sweden)

A. Ktistis

2017-02-01

Full Text Available This paper presents the results from an underwater recording of the stern part of a contemporary cargo-ship wreck. The aim of this survey was to create 3D representations of this wreck mainly for recreational diving purposes. The key points of this paper are: a the implementation of the underwater recording at a diving site; b the reconstruction of a 3d model from data that have been captured by recreational divers; and c the development of a set of products to be used by the general public for the ex situ presentation or for the in situ navigation. The idea behind this project is to define a simple and low cost procedure for the surveying, modeling and 3D representation of a diving site. The perspective of our team is to repeat the proposed methodology for the documentation and the promotion of other diving sites with cultural features, as well as to train recreational divers in underwater surveying procedures towards public awareness and community engagement in the maritime heritage.

Absorbed Energy in Ship Collisions and Grounding

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Zhang, Shengming

1998-01-01

is that the absorbed energy does not depend on the arrangement of the structure, the material properties, and the damage mode.The purpose of the present paper is to establish a new simple relation between the absorbed energy and the destroyed material volume, which can be used as a design tool for analysis of ship...... collisions and grounding. The developed expressions reflect the structural arrangement, the material properties and different damage patterns.The present method is validated against a large number of existing experimental results and detailed numerical simulation results. Applications to full-sale ship...

JENDL special purpose data files and related nuclear data

International Nuclear Information System (INIS)

Iijima, Shungo

1989-01-01

The objectives of JENDL Special Purpose Data Files under development are the applications of nuclear data to the evaluation of the fuel cycle, nuclear activation, and radiation damage. The files in plan consist of 9 types of data, viz., the actinide cross sections, the decay data, the activation cross sections, the (α,n) cross sections, the photo-reaction cross sections, the dosimetry cross sections, the gas production cross sections, the primary knock-on atom spectra and KERMA factors, and the data for standard. The status of the compilation and the evaluation of these data are briefly reviewed. In particular, the features of the data required for the evaluation of the activation cross sections, (α,n) cross sections, photo-reaction cross sections, and PKA data are discussed in some detail. The need for the realistic definition of the scope of the work is emphasized. (author)

77 FR 64843 - Actions on Special Permit Applications

Science.gov (United States)

2012-10-23

... modify the Industrial 173.150(b); special permit to Products dba 173.222(c); authorize the Invensys 173... changed from package to packaging would allow the containers to be shipped back to the manufacturer for... Base, IL. 176.84(c)(2); ammunition on and 176.136. United States Navy Container Ships. (mode 3) DENIED...

Major impact in shipping and port sectors

Energy Technology Data Exchange (ETDEWEB)

Cottrill, K.

1985-08-01

The impact of information technology (IT) on operations efficiency in the transport field is comparable to the revolution brought on by the use of containers. The author examines the influence of IT on British shipping in terms of documentation, cargo tracking, and trend analysis on the operational side and communications links on the structural side. Shipboard computers were slow to penetrate the traditional bastion of the ship's bridge, but the effects of automation are already evident in the size of crews and their work roles. Britain is a world leader in specialized networks in the ports sector. A European-based initiative for a European ports database is in the development stage. It is essential for the IT networks to be compatible both nationally and internationally for the technology to be worthwhile.

Breeding of speciality maize for industrial purposes

OpenAIRE

Pajić Zorica; Radosavljević Milica; Filipović Milomir; Todorović Goran; Srdić Jelena; Pavlov Milovan

2010-01-01

The breeding programme on speciality maize with specific traits was established at the Maize Research Institute, Zemun Polje, several decades ago. The initial material was collected, new methods applying to breeding of speciality maize, i.e. popping maize, sweet maize and white-seeded maize, were introduced. The aim was to enhance and improve variability of the initial material for breeding these three types of maize. Then, inbred lines of good combining abilities were developed and used as c...

Hydrodynamic analysis of floating platform for special purposes under complex water environment

Science.gov (United States)

Ma, Guang-ying; Yao, Yun-long

2018-03-01

This article studied a new floating offshore platform for special purposes, which was assembled by standard floating modules. By using ANSYS AQWA software, the hydrodynamic model of the platform was established. The time history responses of the platform motions and the cable tension forces were calculate under complex water environments, such as wind, wave, current and mooring. The results showed that the tension of the four cables are far less than the breaking tension of the cable, so that the cable will not break. This study can be referenced by the relevant researchers and engineers.

The instantaneous linear motion information measurement method based on inertial sensors for ships

Science.gov (United States)

Yang, Xu; Huang, Jing; Gao, Chen; Quan, Wei; Li, Ming; Zhang, Yanshun

2018-05-01

Ship instantaneous line motion information is the important foundation for ship control, which needs to be measured accurately. For this purpose, an instantaneous line motion measurement method based on inertial sensors is put forward for ships. By introducing a half-fixed coordinate system to realize the separation between instantaneous line motion and ship master movement, the instantaneous line motion acceleration of ships can be obtained with higher accuracy. Then, the digital high-pass filter is applied to suppress the velocity error caused by the low frequency signal such as schuler period. Finally, the instantaneous linear motion displacement of ships can be measured accurately. Simulation experimental results show that the method is reliable and effective, and can realize the precise measurement of velocity and displacement of instantaneous line motion for ships.

Determination of current loads of floating platform for special purposes

Science.gov (United States)

Ma, Guang-ying; Yao, Yun-long; Zhao, Chen-yao

2017-08-01

This article studied a new floating offshore platform for special purposes, which was assembled by standard floating modules. The environmental load calculation of the platform is an important part of the research of the ocean platform, which has always been paid attention to by engineers. In addition to wave loads, the wind loads and current loads are also important environmental factors that affect the dynamic response of the offshore platform. The current loads on the bottom structure should not be ignored. By Fluent software, the hydrostatic conditions and external current loads of the platform were calculated in this paper. The coefficient which is independent of the current velocity, namely, current force coefficient, can be fitted through current loads, which can be used for the consequent hydrodynamic and mooring analyses.

Design of special purpose products made of nanomodified collagen-containing materials with radio-frequency discharge

Science.gov (United States)

Makhotkina, L. Yu; Sharifullin, S. N.

2016-06-01

Research results shows that RF-plasma treatment increases the adhesion of the coating film to the leather uppers and resistance to abrasion and repeated bending of uppers, which define the ability of material to preserve its consumer properties and characterize longer safety of special purpose footwear form during its wearing.

Green shipping management

CERN Document Server

Lun, Y H Venus; Wong, Christina W Y; Cheng, T C E

2016-01-01

This book presents theory-driven discussion on the link between implementing green shipping practices (GSP) and shipping firm performance. It examines the shipping industry’s challenge of supporting economic growth while enhancing environmental performance. Consisting of nine chapters, the book covers topics such as the conceptualization of green shipping practices (GSPs), measurement scales for evaluating GSP implementation, greening capability, greening and performance relativity (GPR), green management practice, green shipping network, greening capacity, and greening propensity. In view of the increasing quest for environment protection in the shipping sector, this book provides a good reference for firms to understand and evaluate their capability in carrying out green operations on their shipping activities.

The future of languages for special purposes in the era of progressing management

OpenAIRE

Jurin, Suzana

2007-01-01

The authors will give some definitions of the language of special purposes used in multinational business, and they will also describe some characteristics of this language on the morphological level and the level of word-formation. The corpora they are using for this analysis is the corpora found in management reports of German multinational companies. Through this analysis, the authors trace the development of such a language and they observe specific models used in management reports...

46 CFR 153.565 - Special requirement for temperature sensors.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Special requirement for temperature sensors. 153.565... Equipment Special Requirements § 153.565 Special requirement for temperature sensors. If a cargo listed in table 1 of this part refers to this section, temperature sensors must be used to monitor the cargo pump...

Analysis of ship maneuvering data from simulators

Science.gov (United States)

Frette, V.; Kleppe, G.; Christensen, K.

2011-03-01

We analyze complex manuevering histories of ships obtained from training sessions on bridge simulators. Advanced ships are used in fields like offshore oil exploration: dive support vessels, supply vessels, anchor handling vessels, tugs, cable layers, and multi-purpose vessels. Due to high demands from the operations carried out, these ships need to have very high maneuverability. This is achieved through a propulsion system with several thrusters, water jets, and rudders in addition to standard propellers. For some operations, like subsea maintenance, it is crucial that the ship accurately keeps a fixed position. Therefore, bridge systems usually incorporate equipment for Dynamic Positioning (DP). DP is a method to keep ships and semi submersible rigs in a fixed position using the propulsion systems instead of anchors. It may also be used for sailing a vessel from one position to another along a predefined route. Like an autopilot on an airplane, DP may operate without human involvement. The method relies on accurate determination of position from external reference systems like GPS, as well as a continuously adjusted mathematical model of the ship and external forces from wind, waves and currents. In a specific simulator exercise for offshore crews, a ship is to be taken up to an installation consisting of three nearby oil platforms connected by bridges (Frigg field, North Sea), where a subsea inspection is to be carried out. Due to the many degrees of freedom during maneuvering, including partly or full use of DP, the chosen routes vary significantly. In this poster we report preliminary results on representations of the complex maneuvering histories; representations that allow comparison between crew groups, and, possibly, sorting of the different strategic choices behind.

Shipping

OpenAIRE

Wijnolst, N.; Wergeland, T.

1996-01-01

Shipping is a multi-faceted industry which is rather complex to define from an academic point of view. This book attempts to grasp these complexities and provide the reader with an overview of the main topics and terminology in shipping. The book is based on material from our courses in shipping at the universities in Delft and Bergen. As with our lectures, we draw upon quite a va ried material, from research studies at a high academic level to lower level student work and purely descriptive ...

Experiences from the exercise ''MERLIN'' for the detection of radioactive substances with the participation of special-purpose vehicles

International Nuclear Information System (INIS)

Griesbach, M.

2009-01-01

Experiences of an exercise with hazardous goods, in particular with radioactive substances (measurements and taking environmental samples) are described. Several special-purpose vehicles with equipment and specially trained crews were used together with radiation protection experts according to the concept of Hesse. It has been the greatest exercise in Hesse with regard to hazardous goods and in particular with regard to ''incidents with radioactive substances''. (orig.)

Designing Adaptable Ships: Modularity and Flexibility in Future Ship Designs

Science.gov (United States)

2016-01-01

with motors, belts, shafts , seals, valves, hose spindles , and switches. If ship installation is not installed, the system will be status quo. Ship...Impact: the current centrifugal purifiers (Alfa-Laval) have experienced frequent failures with motor, belts, shafts , seals, valves, hose spindles ... Designing Adaptable Ships Modularity and Flexibility in Future Ship Designs John F. Schank, Scott Savitz, Ken Munson, Brian Perkinson, James

E-navigation Services for Non-SOLAS Ships

Directory of Open Access Journals (Sweden)

Kwang An

2016-06-01

Full Text Available It is clearly understood that the main benefits of e-navigation are improved safety and better protection of the environment through the promotion of standards of navigational system and a reduction in human error. In order to meet the expectations on the benefit of e-navigation, e-navigation services should be more focused on non-SOLAS ships. The purpose of this paper is to present necessary e-navigation services for non-SOLAS ships in order to prevent marine accidents in Korean coastal waters. To meet the objectives of the study, an examination on the present navigation and communication system for non-SOLAS ships was performed. Based on the IMO's e-navigation Strategy Implementation Plan (SIP and Korea's national SIP for e-navigation, future trends for the development and implementation of e-navigation were discussed. Consequently, Electronic Navigational Chart (ENC download and ENC up-date service, ENC streaming service, route support service and communication support service based on Maritime Cloud were presented as essential e-navigation services for non-SOLAS ships. This study will help for the planning and designing of the Korean e-navigation system. It is expected that the further researches on the navigation support systems based on e-navigation will be carried out in order to implement the essential e-navigation services for non-SOLAS ships.

Shipping Service requests all users of wooden pallets

CERN Multimedia

2006-01-01

The Shipping Service requests all users of wooden pallets marked 'EUR' (80x120 cm) or freight containers and lids marked 'CFF SBB FFS', which are subject to a refundable deposit and thus have a logistics exchange value, to make any they are holding available as soon as possible to CERN's Transport Service, which is responsible for collecting and returning them to the Goods Reception Service in Buildings 904 and 194. A large number of EUR pallets and CFF freight containers and lids are used as supports and packing cases for storing various items of equipment in buildings and underground areas. If you are using them for this purpose, please contact the Goods Reception Service who will be able to offer you alternative wooden pallets and containers that are available to cover special needs. The Goods Reception Service regularly needs to stock up on EUR pallets and CFF containers and lids in order to have sufficient available each day to be able to exchange them for those used by various carriers to deliver goo...

Method of analyzing the shipping inspection water in nuclear fuels

International Nuclear Information System (INIS)

Ishikawa, Tatsuo; Izumoji, Yoshiaki.

1984-01-01

Purpose: To automatically perform radioactive-corrosion-products removing operation and thereby automatic analysis for shipping inspection water. Method: An radioactive-corrosion-product removing device has a column filled with a chelate resin layer. Shipping-inspection water as a specimen is injected from a sample-water inlet to the column, passes through the chelate resin layer, issues through the sample-water exit and is then stored once in a sample collector. The shipping inspection water sampled in the sampling collector is sent to an inspection port in an on-line or off-line manner and gamma-ray determination is made by a gamma-ray spectrum analyzer. (Horiuchi, T.)

5'-Inositol phosphatase SHIP2 recruits Mena to stabilize invadopodia for cancer cell invasion.

Science.gov (United States)

Rajadurai, Charles V; Havrylov, Serhiy; Coelho, Paula P; Ratcliffe, Colin D H; Zaoui, Kossay; Huang, Bruce H; Monast, Anie; Chughtai, Naila; Sangwan, Veena; Gertler, Frank B; Siegel, Peter M; Park, Morag

2016-09-12

Invadopodia are specialized membrane protrusions that support degradation of extracellular matrix (ECM) by cancer cells, allowing invasion and metastatic spread. Although early stages of invadopodia assembly have been elucidated, little is known about maturation of invadopodia into structures competent for ECM proteolysis. The localized conversion of phosphatidylinositol(3,4,5)-triphosphate and accumulation of phosphatidylinositol(3,4)-bisphosphate at invadopodia is a key determinant for invadopodia maturation. Here we investigate the role of the 5'-inositol phosphatase, SHIP2, and reveal an unexpected scaffold function of SHIP2 as a prerequisite for invadopodia-mediated ECM degradation. Through biochemical and structure-function analyses, we identify specific interactions between SHIP2 and Mena, an Ena/VASP-family actin regulatory protein. We demonstrate that SHIP2 recruits Mena, but not VASP, to invadopodia and that disruption of SHIP2-Mena interaction in cancer cells leads to attenuated capacity for ECM degradation and invasion in vitro, as well as reduced metastasis in vivo. Together, these findings identify SHIP2 as a key modulator of carcinoma invasiveness and a target for metastatic disease. © 2016 Rajadurai et al.

HEURISTIC METHOD OF SHIPS SELECTION FOR THE COORDINATED WORK OF WATER TRANSPORT

Directory of Open Access Journals (Sweden)

O. V. Shcherbina

2018-02-01

Full Text Available Purpose. The study aims to develop a formulation methodology for ship selection in the coordinated work of sea and river transport using a heuristic approach. Methodology. To realize the purpose set in the study, the authors carried out an analysis of domestic and foreign literature sources on the current topic, studied specifics and conditions for the effective operation of marine mono-hulled ships and composite tug/barge towing ones. Findings. The analysis results allowed formulating the heuristics methods that ensure the selection of the type sizes of tug/barge towing ships for the mixed «river-sea» navigation from the priority range of ships of the existing fleet. The proposed method makes it possible to select ships in a more appropriate manner according to the established scheme of work. Rational combinations of technical and operational characteristics of such pairs as «barges and tows», «tug/barge towing ship and sea-going ship», «tug/barge towing ship and restrictive characteristics of the area of navigation» are a prerequisite for the shipping company profit growth by increasing the capacity of ships. Originality. For the first time, the authors applied a heuristic approach to the selection of tug/barge towing ships and sea-going ones for coordinated work with the performance of cargo operations on the raid of the estuary port when transporting bulk goods. The basis of the approach is the selection of a rational mix of technical and operational characteristics of barges and tugs. The proposed approach allows determining the best combination of ship type sizes in the organization of coordinated work of sea and river transport. At the same time, the continuity of the goods transportation process from the sea ports to the river ones located in the depth of the country (and in the opposite direction is ensured. Practical value. The presented methodology is a logical continuation of the cycle of studies performed by the authors. The

Ship Lock Control System Optimization using GA, PSO and ABC: A Comparative Review

Directory of Open Access Journals (Sweden)

Željko Kanović

2014-02-01

Full Text Available This paper presents the comparison of some well-known global optimization techniques in optimization of an expert system controlling a ship locking process. The purpose of the comparison is to find the best algorithm for optimization of membership function parameters of fuzzy expert system for the ship lock control. Optimization was conducted in order to achieve better results in local distribution of ship arrivals, i.e. shorter waiting times for ships and less empty lockages. Particle swarm optimization, artificial bee colony optimization and genetic algorithm were compared. The results shown in this paper confirmed that all these procedures show similar results and provide overall improvement of ship lock operation performance, which speaks in favour of their application in similar transportation problem optimization.

Present state of Japan Nuclear Ship Development Agency

International Nuclear Information System (INIS)

Takada, Yoshio

1981-01-01

The Japan Nuclear Ship Development Agency held the annual report meeting on April 8, 1981. The main contents were the plan of research and development of nuclear ships hereafter, the present state of the repair works for the nuclear ship ''Mutsu'', the progress of the selection of the new home port and others. In the last year, the function of research was given to the Agency by the revision of the related law. The full-scale repair works for Mutsu were started in August, 1980, and various equipments and shields in the containment vessel and the upper shields of the containment vessel have been removed. Subsequently, new shields are being installed. According to the report by the committee of nuclear ship research and development, the development of Mutsu, which is valuable as the experimental ship, is continued. Moreover, it is proposed to do the research and development of an improved marine nuclear plant for the purposes of securing the economic efficiency, the proving of the reliability of nuclear merchant ships, and the establishment of safety. As the home port for Mutsu, the new port will be constructed on the open sea side in Aomori Prefecture, and as a candidate, Sekine beach in Mutsu City was named. Till the completion of the new home port, Mutsu will be berthed in Ominato home port. The conditions for entering and berthing in Ominato port will be decided later. (Kako, I.)

Classification of Ship Routing and Scheduling Problems in Liner Shipping

DEFF Research Database (Denmark)

Kjeldsen, Karina Hjortshøj

2011-01-01

This article provides a classification scheme for ship routing and scheduling problems in liner shipping in line with the current and future operational conditions of the liner shipping industry. Based on the classification, the literature is divided into groups whose main characteristics...

Investigations of active interrogation techniques to detect special nuclear material in maritime environments: Standoff interrogation of small- and medium-sized cargo ships

Energy Technology Data Exchange (ETDEWEB)

Miller, Thomas M., E-mail: millertm@ornl.gov; Patton, Bruce W.; Grogan, Brandon R.; Henkel, James J.; Murphy, Brian D.; Johnson, Jeffrey O.; Mihalczo, John T.

2013-12-01

In this work, several active interrogation (AI) sources are evaluated to determine their usefulness in detecting the presence of special nuclear material (SNM) in fishing trawlers, small cargo transport ships, and luxury yachts at large standoff distances from the AI source and detector. This evaluation is performed via computational analysis applying Monte Carlo methods with advanced variance reduction techniques. The goal is to determine the AI source strength required to detect the presence of SNM. The general conclusion of this study is that AI is not reliable when SNM is heavily shielded and not tightly coupled geometrically with the source and detector, to the point that AI should not be considered a via interrogation option in these scenarios. More specifically, when SNM is shielded by hydrogenous material large AI source strengths are required if detection is based on neutrons, which is not surprising. However, if the SNM is shielded by high-Z material the required AI source strengths are not significantly different if detection is based on neutrons or photons, which is somewhat surprising. Furthermore, some of the required AI source strengths that were calculated are very large. These results coupled with the realities of two ships moving independently at sea and other assumptions made during this analysis make the use of standoff AI in the maritime environment impractical.

Investigations of active interrogation techniques to detect special nuclear material in maritime environments: Standoff interrogation of small- and medium-sized cargo ships

International Nuclear Information System (INIS)

Miller, Thomas M.; Patton, Bruce W.; Grogan, Brandon R.; Henkel, James J.; Murphy, Brian D.; Johnson, Jeffrey O.; Mihalczo, John T.

2013-01-01

In this work, several active interrogation (AI) sources are evaluated to determine their usefulness in detecting the presence of special nuclear material (SNM) in fishing trawlers, small cargo transport ships, and luxury yachts at large standoff distances from the AI source and detector. This evaluation is performed via computational analysis applying Monte Carlo methods with advanced variance reduction techniques. The goal is to determine the AI source strength required to detect the presence of SNM. The general conclusion of this study is that AI is not reliable when SNM is heavily shielded and not tightly coupled geometrically with the source and detector, to the point that AI should not be considered a via interrogation option in these scenarios. More specifically, when SNM is shielded by hydrogenous material large AI source strengths are required if detection is based on neutrons, which is not surprising. However, if the SNM is shielded by high-Z material the required AI source strengths are not significantly different if detection is based on neutrons or photons, which is somewhat surprising. Furthermore, some of the required AI source strengths that were calculated are very large. These results coupled with the realities of two ships moving independently at sea and other assumptions made during this analysis make the use of standoff AI in the maritime environment impractical

Specialization and Flexibility in Port Cargo Handling

Directory of Open Access Journals (Sweden)

Hakkı KİŞİ

2016-11-01

Full Text Available Cargo handling appears to be the fundamental function of ports. In this context, the question of type of equipment and capacity rate need to be tackled with respect to cargo handling principles. The purpose of this study is to discuss the types of equipment to be used in ports, relating the matter to costs and capacity. The question is studied with a basic economic theoretical approach. Various conditions like port location, size, resources, cargo traffic, ships, etc. are given parameters to dictate the type and specification of the cargo handling equipment. Besides, a simple approach in the context of cost capacity relation can be useful in deciding whether to use specialized or flexible equipment. Port equipment is sometimes expected to be flexible to handle various types of cargo as many as possible and sometimes to be specialized to handle one specific type of cargo. The cases that might be suitable for those alternatives are discussed from an economic point of view in this article. Consequently, effectiveness and efficiency criteria play important roles in determining the handling equipment in ports.

Selection and optimization of mooring cables on floating platform for special purposes

Science.gov (United States)

Ma, Guang-ying; Yao, Yun-long; Zhao, Chen-yao

2017-08-01

This paper studied a new type of assembled marine floating platform for special purposes. The selection and optimization of mooring cables on the floating platform are studied. By using ANSYS AQWA software, the hydrodynamic model of the platform was established to calculate the time history response of the platform motion under complex water environments, such as wind, wave, current and mooring. On this basis, motion response and cable tension were calculated with different cable mooring states under the designed environmental load. Finally, the best mooring scheme to meet the cable strength requirements was proposed, which can lower the motion amplitude of the platform effectively.

32 CFR 761.13 - Ships: Individual authorizations.

Science.gov (United States)

2010-07-01

... information and any additional information that may be relative to the proposed operation: (1) Name of ship. (2) Place of registry and registry number. (3) Name, nationality and address of operator. (4) Name... port of call prior to entry into area for which clearance is requested. (9) Purpose of visit. (10...

Basin-Wide Maritime Awareness From Multi-Source Ship Reporting Data

Directory of Open Access Journals (Sweden)

Harm Greidanus

2013-06-01

Full Text Available A system was set up to ingest automatic ship position reports (terrestrial and satellite AIS, LRIT and fuse these into a Maritime Situational Picture, tracking the ships within an ocean basin-wide area of interest in real time. Trial runs were made over several months, collecting reporting data from a number of different sources, over the Gulf of Aden and the Western Indian Ocean. Also satellite radar surveillance was carried out in order to sample the presence of non-reporting ships. The trial showed that satellite AIS is a powerful tool for basin-wide ship traffic monitoring; that multiple AIS satellites are needed for sufficient completeness and update rate; and that coastal AIS and LRIT still provide essential complements to the satellite AIS data. The radar survey showed that about half of the radar-detected ships are not seen in the reporting data. The ultimate purpose of this work is to support the countries around the Horn of Africa in the fight against piracy and to help build their capacity to deliver maritime security and safety.

SPECIAL PURPOSE SHOCK TUBE for BLAST ASSESSMENT

Data.gov (United States)

Federal Laboratory Consortium — This device is a specially designed shock tube for testing fabric samples in a controlled environment. The device determines the appropriate types of sensors to be...

Risk Analysis on Ship Wreck and Container Cargo to Ship Navigation

Directory of Open Access Journals (Sweden)

Muhammad Badrus Zaman

2017-03-01

Full Text Available Wreck of a ship is an incident that must be avoided. Ship accidents are generally caused by a several cases, such as human error, natural disaster, technical errors, missed communication, poor condition of the ship, and many more. Ship wreckage have huge impact for ship navigation, environment, economics, and others. Those impact have many disadvantages for the shipowners, and also for environment. For examples the fuel spills that pollute the environment, make disturbance to sailing ship because the track for those navigation is blocked by the ship wreck and their cargo especially on shallow location (<50 m. These research will discuss the effect the container when it is floats on the sea and its interference other ships. The main objective of this study is to present a risk assessment on the environmental impact of the wreck and container cargo. Wrecks on the seabed is likely to pose a risk to passing ships. container and its contents as well as the possibility of refloat, and also their environmental risks emanating from the wreck and container cargo, such as fuels, lubricants, and chemical cargo. Variations scenario is a collision between ships that pass by floating containers. The frequency of refloating container, and the consequences of the passing ship depends on several factors, which will be the subject of research. However, because of the frequency of refloating containers is unlikely, then the risk is low and does not pose a danger to navigation. These risk assessment using risk matrix 5x5 which is the combined value of the frequency and consequences of the incident. The results of this study indicate the level of risk, whether the risk is accepted, not accepted or received by considering the costs and benefits (ALARP. To consequence, there are two parameters which energy is absorbed and the penetration occurs. The absorbed energy is divided into two, namely the energy absorbed by ship and the energy absorbed by containers. In this

5′-Inositol phosphatase SHIP2 recruits Mena to stabilize invadopodia for cancer cell invasion

Science.gov (United States)

Zaoui, Kossay; Huang, Bruce H.; Sangwan, Veena; Gertler, Frank B.

2016-01-01

Invadopodia are specialized membrane protrusions that support degradation of extracellular matrix (ECM) by cancer cells, allowing invasion and metastatic spread. Although early stages of invadopodia assembly have been elucidated, little is known about maturation of invadopodia into structures competent for ECM proteolysis. The localized conversion of phosphatidylinositol(3,4,5)-triphosphate and accumulation of phosphatidylinositol(3,4)-bisphosphate at invadopodia is a key determinant for invadopodia maturation. Here we investigate the role of the 5′-inositol phosphatase, SHIP2, and reveal an unexpected scaffold function of SHIP2 as a prerequisite for invadopodia-mediated ECM degradation. Through biochemical and structure-function analyses, we identify specific interactions between SHIP2 and Mena, an Ena/VASP-family actin regulatory protein. We demonstrate that SHIP2 recruits Mena, but not VASP, to invadopodia and that disruption of SHIP2–Mena interaction in cancer cells leads to attenuated capacity for ECM degradation and invasion in vitro, as well as reduced metastasis in vivo. Together, these findings identify SHIP2 as a key modulator of carcinoma invasiveness and a target for metastatic disease. PMID:27597754

Ship cabin leakage alarm based on ARM SCM

Science.gov (United States)

Qu, Liyan

2018-03-01

If there is a leakage in the cabin of a sailing ship, it is a major accident that threatens the personnel and property of the ship. If we can’t take timely measures, there will be a devastating disaster. In order to judge the leakage of the cabin, it is necessary to set up a leakage alarm system, so as to achieve the purpose of detecting and alarming the leakage of the cabin, and avoid the occurrence of accidents. This paper discusses the design of ship cabin leakage alarm system based on ARM SCM. In order to ensure the stability and precision of the product, the hardware design of the alarm system is carried out, such as circuit design, software design, the programming of SCM, the software programming of upper computer, etc. It is hoped that it can be of reference value to interested readers.

Personal characteristics of a law enforcement unit of special purpose

Directory of Open Access Journals (Sweden)

Vasilenko T.G.

2017-07-01

Full Text Available The relevance of the study of the personal characteristics of law enforcement officers due to a significant number of crimes of an aggressive nature, committed by employees of internal Affairs bodies, and the need to develop preventive measures. The purpose of this research is to study peculiarities of the manifestation of progressive and inhibiting aggression personality factors in the structure of law enforcement officers, whose activities directly associated with aggression in the performance of official duties. The study involved 149 employees of special forces of law enforcement are male aged 18 to 35 years. Used a wide battery of psychodiagnostic methods aimed at a comprehensive study of the individual respondents. the data Obtained were analyzed using the method of correlation pleiades. According to the results, was discovered a unique picture of the relationship among personality structures and interaction progressive and deterrent aggression factors with the prevalence of progressive on inhibitory factors in the studied structure.

75 FR 8176 - Shipping Coordinating Committee; Notice of Committee Meeting

Science.gov (United States)

2010-02-23

..., SW., Washington, DC 20593-0001. The primary purpose of the meeting is to prepare for the sixtieth... matters to be considered include: --Harmful aquatic organisms in ballast water --Recycling of ships...

Buckling of Ship Structures

CERN Document Server

Shama, Mohamed

2013-01-01

Buckling of Ship Structures presents a comprehensive analysis of the buckling problem of ship structural members. A full analysis of the various types of loadings and stresses imposed on ship plating and primary and secondary structural members is given. The main causes and consequences of the buckling mode of failure of ship structure and the methods commonly used to control buckling failure are clarified. This book contains the main equations required to determine the critical buckling stresses for both ship plating and the primary and secondary stiffening structural members. The critical buckling stresses are given for ship plating subjected to the induced various types of loadings and having the most common boundary conditions encountered in ship structures.  The text bridges the gap existing in most books covering the subject of buckling of ship structures in the classical analytical format, by putting the emphasis on the practical methods required to ensure safety against buckling of ship structur...

Shipping Service calls on all users of wooden pallets

CERN Multimedia

2006-01-01

The Shipping Service requests all users of wooden pallets marked 'EUR' (80x120 cm) or freight containers and lids marked 'CFF SBB FFS', which are subject to a refundable deposit and thus have a logistics exchange value, to make any they are holding available as soon as possible to CERN's Transport Service, which is responsible for collecting and returning them to the Goods Reception Service in Buildings 904 and 194. A large number of EUR pallets and CFF freight containers and lids are used as supports and packing cases for storing various items of equipment in buildings and underground areas. If you are using them for this purpose, please contact the Goods Reception Service, which will be able to offer you alternative wooden pallets and containers that are available to cover special needs. The Goods Reception Service regularly needs to stock up on EUR pallets and CFF containers and lids in order to have sufficient available each day to be able to exchange them for those used by various carriers to deliver g...

Final report on special impact tests of plutonium shipping containers description of test results

International Nuclear Information System (INIS)

Bonzon, L.L.

1977-02-01

The results from tests conducted to determine the structural response of the LLD-1, Model 1518-6M, and FL-10 plutonium shipping packages when subjected to high-speed impacts (170 to 760 ft/sec) onto unyielding, concrete, and soil targets are presented

Notes on a proposed consultation procedure for the licensing of nuclear ships

International Nuclear Information System (INIS)

Devoto, A.

1978-01-01

The application of the recommendations adopted by the International Commission on Radiological Protection (see ICRP Publication no. 26) to future nuclear ship projects is discussed. That booklet clarifies the recommendation, adopted in 1965, according to which all doses should be kept as low as possible having regard to social and economic factors. This low level is achieved with justification of nuclear operations and optimisation of safety systems. The need to evaluate collective dose gives rise to special problems with regard to nuclear ships, in view of the variety of population groups or communities involved and the different assessments applied to each [fr

Monitoring ship noise to assess the impact of coastal developments on marine mammals.

Science.gov (United States)

Merchant, Nathan D; Pirotta, Enrico; Barton, Tim R; Thompson, Paul M

2014-01-15

The potential impacts of underwater noise on marine mammals are widely recognised, but uncertainty over variability in baseline noise levels often constrains efforts to manage these impacts. This paper characterises natural and anthropogenic contributors to underwater noise at two sites in the Moray Firth Special Area of Conservation, an important marine mammal habitat that may be exposed to increased shipping activity from proposed offshore energy developments. We aimed to establish a pre-development baseline, and to develop ship noise monitoring methods using Automatic Identification System (AIS) and time-lapse video to record trends in noise levels and shipping activity. Our results detail the noise levels currently experienced by a locally protected bottlenose dolphin population, explore the relationship between broadband sound exposure levels and the indicators proposed in response to the EU Marine Strategy Framework Directive, and provide a ship noise assessment toolkit which can be applied in other coastal marine environments. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

Viking FellowSHIP: Norwegian hydrogen ship on the right course

International Nuclear Information System (INIS)

Larssen-Aas, Kari

2006-01-01

In the future fuel cells will change the world of shipping's economical conditions, and environmental effects from this industry. A new model of a hydrogen fuelled ship was presented at the ONS exhibition in Stavanger 2006. The technology may revolutionize the shipping industry. A brief description of the project is presented (ml)

Safety of nuclear ships

International Nuclear Information System (INIS)

1978-01-01

Interest in the utilization of nuclear steam supply systems for merchant ships and icebreakers has recently increased considerably due to the sharp rise in oil prices and the continuing trend towards larger and faster merchant ships. Canada, for example, is considering construction of an icebreaker in the near future. On the other hand, an accident which could result in serious damage to or the sinking of a nuclear ship is potentially far more dangerous to the general public than a similar accident with a conventional ship. Therefore, it was very important to evaluate in an international forum the safety of nuclear ships in the light of our contemporary safety philosophy, taking into account the results of cumulative operating experience with nuclear ships in operation. The philosophy and safety requirement for land-based nuclear installations were outlined because of many common features for both land-based nuclear installations and nuclear ships. Nevertheless, essential specific safety requirements for nuclear ships must always be considered, and the work on safety problems for nuclear ships sponsored by the NEA was regarded as an important step towards developing an international code of practice by IMCO on the safety of nuclear merchant ships. One session was devoted to the quantitative assessment of nuclear ship safety. The probability technique of an accident risk assessment for nuclear power plants is well known and widely used. Its modification, to make it applicable to nuclear propelled merchant ships, was discussed in some papers. Mathematical models for describing various postulated accidents with nuclear ships were developed and reported by several speakers. Several papers discussed a loss-of-coolant accident (LOCA) with nuclear steam supply systems of nuclear ships and engineering design features to prevent a radioactive effluence after LOCA. Other types of postulated accidents with reactors and systems in static and dynamic conditions were also

78 FR 14400 - Shipping Coordinating Committee; Notice of Committee Meeting

Science.gov (United States)

2013-03-05

..., 2100 Second Street SW., Washington, DC, 20593. The primary purpose of the meeting is to prepare for the... ballast water; --Recycling of ships; --Air pollution and energy efficiency; --Reduction of GHG emissions...

77 FR 52105 - Shipping Coordinating Committee; Notice of Committee Meeting

Science.gov (United States)

2012-08-28

... Building, 2100 Second Street SW., Washington, DC, 20593. The primary purpose of the meeting is to prepare... organisms in ballast water; --Recycling of ships; --Air pollution and energy efficiency; --Reduction of GHG...

77 FR 54648 - Shipping Coordinating Committee; Notice of Committee Meeting

Science.gov (United States)

2012-09-05

... Building, 2100 Second Street SW., Washington, DC 20593. The primary purpose of the meeting is to prepare... organisms in ballast water; --Recycling of ships; --Air pollution and energy efficiency; --Reduction of GHG...

Gamma ray benchmark on the spent fuel shipping cask TN 12

International Nuclear Information System (INIS)

Blum, P.; Cagnon, R.; Cladel, C.; Ermont, G.; Nimal, J.C.

1983-05-01

The purpose of this benchmark is to compare measurements and calculation of gamma-ray dose rates around a shipping cask loaded with 12 spent fuel elements of FESSENHEIM PWR type. The benchmark provides a means to verify gamma-ray sources and gamma-ray transport calculation methods in shipping cask configurations. The comparison between measurements and calculations shows a good agreement except near the fuel element top where the discrepancy reaches a factor 2

Performance of Ships and Offshore Structures in Waves

Directory of Open Access Journals (Sweden)

Shukui Liu

2012-01-01

for predicting large amplitude motions of ships and floating structures in response to incoming waves in the frame of potential theory. The developed alternative set of time domain methods simulate the hydrodynamic forces acting on ships advancing in waves with constant speed. For motions’ simulation, the diffraction forces and radiation forces are calculated up to the mean wetted surface, while the Froude-Krylov forces and hydrostatic restoring forces are calculated up to the undisturbed incident wave surface in case of large incident wave amplitude. This enables the study of the above waterline hull form effect. Characteristic case studies on simulating the hydrodynamic forces and motions of standard type of ships have been conducted for validation purpose. Good agreement with other numerical codes and experimental data has been observed. Furthermore, the added resistance of ships in waves can be calculated by the presented methods. This capability supports the increased demand of this type of tools for the proper selection of engine/propulsion systems accounting for ship’s performance in realistic sea conditions, or when optimizing ship’s sailing route for minimum fuel consumption and toxic gas emissions.

Fatigue analysis of assembled marine floating platform for special purposes under complex water environments

Science.gov (United States)

Ma, Guang-ying; Yao, Yun-long

2018-03-01

In this paper, the fatigue lives of a new type of assembled marine floating platform for special purposes were studied. Firstly, by using ANSYS AQWA software, the hydrodynamic model of the platform was established. Secondly, the structural stresses under alternating change loads were calculated under complex water environments, such as wind, wave, current and ice. The minimum fatigue lives were obtained under different working conditions. The analysis results showed that the fatigue life of the platform structure can meet the requirements

40 CFR 418.21 - Specialized definitions.

Science.gov (United States)

2010-07-01

... STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Ammonia Subcategory § 418.21 Specialized... product shall mean the anhydrous ammonia content of the compound manufactured. (c) The term shipping... cleaning tank cars or tank trucks; and discharges from air pollution control scrubbers designed to control...

A general-purpose process modelling framework for marine energy systems

International Nuclear Information System (INIS)

Dimopoulos, George G.; Georgopoulou, Chariklia A.; Stefanatos, Iason C.; Zymaris, Alexandros S.; Kakalis, Nikolaos M.P.

2014-01-01

Highlights: • Process modelling techniques applied in marine engineering. • Systems engineering approaches to manage the complexity of modern ship machinery. • General purpose modelling framework called COSSMOS. • Mathematical modelling of conservation equations and related chemical – transport phenomena. • Generic library of ship machinery component models. - Abstract: High fuel prices, environmental regulations and current shipping market conditions impose ships to operate in a more efficient and greener way. These drivers lead to the introduction of new technologies, fuels, and operations, increasing the complexity of modern ship energy systems. As a means to manage this complexity, in this paper we present the introduction of systems engineering methodologies in marine engineering via the development of a general-purpose process modelling framework for ships named as DNV COSSMOS. Shifting the focus from components – the standard approach in shipping- to systems, widens the space for optimal design and operation solutions. The associated computer implementation of COSSMOS is a platform that models, simulates and optimises integrated marine energy systems with respect to energy efficiency, emissions, safety/reliability and costs, under both steady-state and dynamic conditions. DNV COSSMOS can be used in assessment and optimisation of design and operation problems in existing vessels, new builds as well as new technologies. The main features and our modelling approach are presented and key capabilities are illustrated via two studies on the thermo-economic design and operation optimisation of a combined cycle system for large bulk carriers, and the transient operation simulation of an electric marine propulsion system

Recent situations around nuclear ships

International Nuclear Information System (INIS)

Mizuno, Hiroshi

1978-01-01

The philosophy when the safety standard for nuclear ships is drawn up and the international rules specifically for nuclear ships are summarized. As for the safety standard for nuclear ships, the safety requirements for ordinary ships, for the ships transporting nuclear reactors, for ordinary nuclear reactors, and for the reactors moving around the seas must be included. As for the international rules for nuclear ships, there are chapter 8 ''Nuclear ships'' in the International Convention on the Safety of Life at Sea, 1960 and 1974, and Safety Consideration in the Use of Ports and Approaches by Nuclear Merchant Ships. Also there are national rules and standards in Japan and foreign countries. One of the means to explore the practicality of nuclear ships is the investigation of the economy. At this time, the social merits and demerits of nuclear ships must be compared with conventional ships by taking total expenses into account without omission. When oil is depleted, the age of nuclear ships will not necessarily begin, and the will be still some competitors. The investigations concerning the economy of nuclear ships have been carried out in various countries. The present state of the development of nuclear ships in Japan and foreign countries is explained. Many conferences and symposia have been held concerning nuclear ships, and those held recently are enumerated. The realization of nuclear ship age cannot be anticipated from existing papers and shipbuilding projects. (Kako, I.)

Shipping Information Pipeline

DEFF Research Database (Denmark)

Jensen, Thomas

to creating a more efficient shipping industry, and a number of critical issues are identified. These include that shipments depend on shipping information, that shipments often are delayed due to issues with documentation, that EDI messages account for only a minor part of the needed information......This thesis applies theoretical perspectives from the Information Systems (IS) research field to propose how Information Technology (IT) can improve containerized shipping. This question is addressed by developing a set of design principles for an information infrastructure for sharing shipping...... information named the Shipping Information Pipeline (SIP). Review of the literature revealed that IS research prescribed a set of meta-design principles, including digitalization and digital collaboration by implementation of Inter-Organizational Systems based on Electronic Data Interchange (EDI) messages...

Nuclear data libraries for gamma analysis programs, including special purpose libraries

International Nuclear Information System (INIS)

Westmeier, W.; Reus, U.; Siemon, K.; Westmeier, H.

2002-01-01

A complete set of gamma ray and other data relating to the decay of all known nuclides has been compiled from the literature and electronic sources. The data were critically reviewed, evaluated and the consistency was checked. The total catalogue is comprised of data-sets for 3841 nuclides and isomers with 106,355 gamma ray and 19,347 X ray entries. A subset of 1,627 nuclides with 32,456 gamma ray entries is extracted into a database, which provides the basis for the generation of nuclide libraries for the application in spectrometry programmes. The WINDOWS based program NUC M AN was developed which serves for the updating and editing of the database as well as the generation of task-specific user libraries for special purposes. The literature cut-off date for this catalogue is January 1, 1998. (author)

A numerical study on ship-ship interaction in shallow and restricted waterway

Directory of Open Access Journals (Sweden)

Sungwook Lee

2015-09-01

Full Text Available In the present study, a numerical prediction method on the hydrodynamic interaction force and moment between two ships in shallow and restricted waterway is presented. Especially, the present study proposes a methodology to overcome the limitation of the two dimensional perturbation method which is related to the moored-passing ship interaction. The validation study was performed and compared with the experiment, firstly. Afterward, in order to propose a methodology in terms with the moored-passing ship interaction, further studies were performed for the moored-passing ship case with a Reynolds Averaged Navier-Stokes (RANS calculation which is using OpenFOAM with Arbitrary Coupled Mesh Interface (ACMI technique and compared with the experiment result. Finally, the present study proposes a guide to apply the two dimensional perturbation method to the moored-passing ship interaction. In addition, it presents a possibility that the RANS calculation with ACMI can applied to the ship-ship interaction without using a overset moving grid technique.

Nuclear ship engineering simulator

International Nuclear Information System (INIS)

Itoh, Yasuyoshi; Kusunoki, Tsuyoshi; Hashidate, Koji

1991-01-01

The nuclear ship engineering simulator, which analyzes overall system response of nuclear ship numerically, is now being developed by JAERI as an advanced design tool with the latest computer technology in software and hardware. The development of the nuclear ship engineering simulator aims at grasping characteristics of a reactor plant under the situation generated by the combination of ocean, a ship hull and a reactor. The data from various tests with the nuclear ship 'MUTSU' will be used for this simulator to modulate and verify its functions of reproducing realistic response of nuclear ship, and then the simulator will be utilized for the research and development of advanced marine reactors. (author)

The legal position of nuclear ships according to the drafts of the third UN-conference on the law of the sea

International Nuclear Information System (INIS)

Rauschning, D.G.

1978-01-01

At the end of the 6th session of the Third UN-Conference on the Law of the Sea an Informal Composite Negotiating text has emerged. Art. 19 ICNT, which defines innocent passage, contains no express limitation on nuclear shipping, while Art. 23 presupposes that nuclear ships have this right, provided they carry documents and observe special precautionary measures established by international agreements. A certificate of nuclear safety pursuant to Chapter VIII of SOLAS must be recognized by contracting states and coastal states may require liability coverage. Coastal state lack competences to regulate design, construction, manning or equipment of foreign ships or to impose requirements which have the practical effect of denying innocent passage. The right of passage also prevails in the special economic zones and in archipelagic waters

Crushing Strength of Ship Structures

DEFF Research Database (Denmark)

Cerup-Simonsen, Bo; Abramowicz, W.; Høstgaard-Brene, C.N.S.

1999-01-01

The crushing response of ship structures is of primary importance to the designers and practicing engineers concerned with accidental loading and accident reconstruction of marine vehicles. Ship to-ship collisions, ship-harbor infrastructure interaction or ship-offshore structure interaction are ...

Prediction of noise in ships by the application of “statistical energy analysis.”

DEFF Research Database (Denmark)

Jensen, John Ødegaard

1979-01-01

If it will be possible effectively to reduce the noise level in the accomodation on board ships, by introducing appropriate noise abatement measures already at an early design stage, it is quite essential that sufficiently accurate prediction methods are available for the naval architects...... or for a special noise abatement measure, e.g., increased structural damping. The paper discusses whether it might be possible to derive an alternative calculation model based on the “statistical energy analysis” approach (SEA). By considering the hull of a ship to be constructed from plate elements connected...

Development of the nuclear ship MUTSU spent fuel shipping cask

International Nuclear Information System (INIS)

Ishizuka, M.; Umeda, M.; Nawata, Y.; Sato, H.; Honami, M.; Nomura, T.; Ohashi, M.; Higashino, A.

1989-01-01

After the planned trial voyage (4700 MWD/MTU) of the nuclear ship MUTSU in 1990, her spent fuel assemblies, initially made of two types of enriched UO 2 (3.2wt% and 4.4wt%), will be transferred to the reprocessing plant soon after cooling down in the ship reactor for more than one year. For transportation, the MUTSU spent fuel shipping casks will be used. Prior to transportation to the reprocessing plant, the cooled spent fuel assemblies will be removed from the reactor to the shipping casks and housed at the spent fuel storage facility on site. In designing the MUTSU spent fuel shipping cask, considerations were given to make the leak-tightness and integrity of the cask confirmable during storage. The development of the cask and the storage function demonstration test were performed by Japan Atomic Energy Research Institute (JAERI) and Mitsubishi Heavy Industries, Ltd. (MHI). One prototype cask for the storage demonstration test and licensed thirty-five casks were manufactured between 1987 and 1988

Review of the total system related to operation of nuclear-powered ship

International Nuclear Information System (INIS)

Takamasa, Tomoji; Miyashita, Kunio

2000-01-01

It is essential to establish a marine reactor having excellent safety and reliability, which is capable of competing economically with conventional ships, and which can be accepted by international society, in order to be prepared for practical application of future nuclear-powered ships. For this purpose, it is important not only to demonstrate a marine reactor using a model or test device to simulate actual operation, but also to establish the environmental requirements for operation of a nuclear-powered ship, such as safety standards that are operationally and internationally common for ships, and to establish a repair base for nuclear-powered ships. Systems research for the practical application of nuclear-powered ships was conducted for five years, fiscal years 1992 through 1996, by a group in the Japan Atomic Energy Research Institute (JAERI), under the project title 'Review of the total system related to operation of nuclear-powered ships.' The project sought to summarize requirements for the practical application of nuclear-powered ships from the standpoint of the need side, e.g., what nuclear-powered ships will be requested, and what functions will be provided under the expected future social environment; to show a complete system concept for the operation of nuclear-powered ships; and to clarify the situations creating demand for nuclear-powered ships, as well as the system and environmental conditions to be established for operation of practical nuclear-powered ships. Study considerations included the size of the operation system for a nuclear-powered ship, a scenario for introducing a nuclear-powered container ship, and economic evolution from the effects on the whole shipping system, based on container ships, of introducing a nuclear-powered ship. The results of these considerations were made the framework for constructing an entire system and evaluating its economy. The treatment and disposal of radioactive waste from a nuclear-powered ship, and the

7 CFR 927.121 - Pears for gift purposes.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Pears for gift purposes. 927.121 Section 927.121... WASHINGTON Rules and Regulations Exemptions and Safeguards § 927.121 Pears for gift purposes. There are exempted from the provisions of the order any and all pears which, in individual gift packages, are shipped...

Ship Vibrations

DEFF Research Database (Denmark)

Sørensen, Herman

1997-01-01

Methods for calculating natural frequencies for ship hulls and for plates and panels.Evaluation of the risk for inconvenient vibrations on board......Methods for calculating natural frequencies for ship hulls and for plates and panels.Evaluation of the risk for inconvenient vibrations on board...

Location model of specialized terminals for soybe an exports in Brazil

Directory of Open Access Journals (Sweden)

Alessandra Fraga Dubke

2011-04-01

Full Text Available The purpose of this work is the development of a location model for specialized terminals used as transshipment points in the supply chain of soybeans. The theoretical basis of the study relies on the association of a transshipment model with a multi-commodity, multi-facility capacitated location model. The shipping ports might be seen as specialized terminals that add value to the exported products by transforming raw soy grains into soy oil and soy meal. The proposed model also considers service activities in each terminal and the capacity of the maritime ports. Using representative data from the year 2004, the model is illustrated by a small case study, which considers six points of production in inland Brazil, all served by railways, one maritime port on the north and five on the east coast, and three destination ports in Europe and Asia. The study includes a rough sensitivity analysis regarding volumes, capacities, prices, and transportation costs

Investigation of active interrogation techniques to detect special nuclear material in maritime environments: Boarded search of a cargo container ship

International Nuclear Information System (INIS)

Grogan, Brandon R.; Henkel, James J.; Johnson, Jeffrey O.; Mihalczo, John T.; Miller, Thomas M.; Patton, Bruce W.

2013-01-01

The detonation of a terrorist nuclear weapon in the United States would result in the massive loss of life and grave economic damage. Even if a device was not detonated, its known or suspected presence aboard a cargo container ship in a U.S. port would have major economic and political consequences. One possible means to prevent this threat would be to board a ship at sea and search for the device before it reaches port. The scenario considered here involves a small Coast Guard team with strong intelligence boarding a container ship to search for a nuclear device. Using active interrogation, the team would nonintrusively search a block of shipping containers to locate the fissile material. Potential interrogation source and detector technologies for the team are discussed. The methodology of the scan is presented along with a technique for calculating the required interrogation source strength using computer simulations. MCNPX was used to construct a computer model of a container ship, and several search scenarios were simulated. The results of the simulations are presented in terms of the source strength required for each interrogation scenario. Validation measurements were performed in order to scale these simulation results to expected performance. Interrogations through the short (2.4 m) axis of a standardized shipping container appear to be feasible given the entire range of container loadings tested. Interrogations through several containers at once or a single container through its long (12.2 m) axis do not appear to be viable with a portable interrogation system

Investigation of active interrogation techniques to detect special nuclear material in maritime environments: Boarded search of a cargo container ship

Energy Technology Data Exchange (ETDEWEB)

Grogan, Brandon R., E-mail: groganbr@ornl.gov; Henkel, James J.; Johnson, Jeffrey O.; Mihalczo, John T.; Miller, Thomas M.; Patton, Bruce W.

2013-12-01

The detonation of a terrorist nuclear weapon in the United States would result in the massive loss of life and grave economic damage. Even if a device was not detonated, its known or suspected presence aboard a cargo container ship in a U.S. port would have major economic and political consequences. One possible means to prevent this threat would be to board a ship at sea and search for the device before it reaches port. The scenario considered here involves a small Coast Guard team with strong intelligence boarding a container ship to search for a nuclear device. Using active interrogation, the team would nonintrusively search a block of shipping containers to locate the fissile material. Potential interrogation source and detector technologies for the team are discussed. The methodology of the scan is presented along with a technique for calculating the required interrogation source strength using computer simulations. MCNPX was used to construct a computer model of a container ship, and several search scenarios were simulated. The results of the simulations are presented in terms of the source strength required for each interrogation scenario. Validation measurements were performed in order to scale these simulation results to expected performance. Interrogations through the short (2.4 m) axis of a standardized shipping container appear to be feasible given the entire range of container loadings tested. Interrogations through several containers at once or a single container through its long (12.2 m) axis do not appear to be viable with a portable interrogation system.

Nonlinear dynamic positioning of ships with gain-scheduled wave filtering

DEFF Research Database (Denmark)

Torsetnes, Guttorm; Jouffroy, Jerome; Fossen, Thor I.

This paper presents a globally contracting controller for regulation and dynamic positioning of ships, using only position measurements. For this purpose a globally contracting observer which reconstructs the unmeasured states is constructed. The observer produces accurate estimates of position...

Recycling of merchant ships

Directory of Open Access Journals (Sweden)

Magdalena Klopott

2013-12-01

Full Text Available The article briefly outlines the issues concerning ship recycling. It highlights ships' high value as sources of steel scrap and non-ferrous metals, without omitting the fact that they also contain a range of hazardous substances. Moreover, the article also focuses on basic ship demolition methods and their environmental impact, as well as emphasizes the importance of “design for ship recycling” philosophy.

Fluid Distribution Analysis of Kite Sail for Application on Ship

Directory of Open Access Journals (Sweden)

. Amiadji

2017-09-01

Full Text Available The increasing number of operating ships resulted in high air pollution from the combustion of the ship's engine. Efforts to utilize alternative energy to reduce ship engine work have been done, one of them is using unlimited alternative energy that is wind where one of its application of is the application of new ships sail, kite sail as auxiliary system of ship propulsion . In this final project purposed to find out the value of aerodynamic force of kite sail and power it can generated , with a CFD method that uses 3 kite sail design forms, rectangular, triangular, and elliptical, with an area of 160 m2 this models are simulated at wind speed variations from 13.4 m / s up 15.82 m / s and angel of attack variation of 15.20, and 25. From the variation obtained the total aerodynamic force generated can reach 28.73 kN in rectangular shape, 30.79 kN of Elipsical shape, and 27.55 kN of triangular shape, on variant Angel Of attack 25. From the value of the aerodynamic force, each kite sail capable of generating power, on a rectangular kite sail of up to 263.02 kW, an elipsical 276.75 kW, and a triangular 252.63 kW.

INTEGRATION OF INFORMATION AND COMMUNICATION TECHNOLOGIES IN TEACHING RUSSIAN AS A FOREIGN LANGUAGE FOR SPECIAL PURPOSES

OpenAIRE

Sergey S. Chromov; Nadezda A. Gulayeva; Irina S. Zelenetskaya

2015-01-01

The paper is untended to draw attention to information communication technologiesin teaching Russian as a foreign language for special purposes at level B 2. In thisregard the educational process of teaching Russian as a foreign language is examinedfor promoting quality improvement in the process of ELT.Technology-enhances language learning(TELL) is described through computer-assisted language learning(CALL)-presentations, webinars, videolectures. The authors share their experience obtained d...

Special Purpose Nuclear Reactor (5 MW) for Reliable Power at Remote Sites Assessment Report

Energy Technology Data Exchange (ETDEWEB)

Sterbentz, James William [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division; Werner, James Elmer [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division; McKellar, Michael George [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division; Hummel, Andrew John [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division; Kennedy, John Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division; Wright, Richard Neil [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division; Biersdorf, John Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States). Nuclear Science and Technology Division

2017-04-01

The Phenomena Identification and Ranking Table (PIRT) technique was conducted on the Special Purpose Reactor nuclear plant design. The PIRT is a structured process to identify safety-relevant/safety-significant phenomena and assess the importance and knowledge base by ranking the phenomena. The Special Purpose Reactor is currently in the conceptual design stage. The candidate reactor has a solid monolithic stainless steel core with an array of heat pipes and fuel pellets embedded in the monolith. The heat pipes are used to remove heat from the core using simple, reliable, and well-characterized physics (capillarity, boiling, and condensation). In the initial design, one heat exchanger is used for the working fluid that produces energy, and a second heat exchanger is used to remove decay heat in emergency or shutdown conditions. In addition, a power conversion cycle such as an open-air Brayton system is available as an option for power conversion and process heat. This report summarizes and documents the process and scope of the four PIRT reviews, noting the major activities and conclusions. The identified phenomena, analyses, rationales, and associated ratings are presented along with a summary of the findings from the four individual PIRTs, namely (1) Reactor Accident and Normal Operations, (2) Heat Pipes, (3) Materials, and (4) Power Conversion. The PIRT reports for these four major system areas evaluated are attached as appendixes to this report and provide considerably more detail about each assessment as well as a more complete listing of the phenomena that were evaluated.

Statistics of meteorology for dose evaluation of crews of nuclear ship

International Nuclear Information System (INIS)

Imai, Kazuhiko; Chino, Masamichi

1981-01-01

For the purpose of the dose evaluation of crews of a nuclear ship, the statistics of wind speed and direction relative to the ship is discussed, using wind data which are reported from ships crusing sea around Japan Island. The analysis on the data shows that the occurrence frequency of wind speed can be fitted with the γ-distribution having parameter p around 3 and wind direction frequency can be treated as a uniform distribution. Using these distributions and taking the ship speed u 3 and the long-term mean speed of natural wind anti u as constant parameters, frequency distribution of wind speed and direction relative to the ship was calculated and statistical quantities necessary for dose evaluation were obtained in the way similar to the procedure for reactor sites on land. The 97% value of wind speed u 97 , which should be used in the dose evaluation for accidental releases may give conservative doses, if it is evaluated as follows, u 97 = 0.64 u sub(s) in the cases u sub(s) > anti u, and u 97 = 0.86 anti u in the cases u sub(s) < anti u including u sub(s) = 0. (author)

Approximate Method of Calculating Forces on Rudder During Ship Sailing on a Shipping Route

Directory of Open Access Journals (Sweden)

K. Zelazny

2014-09-01

Full Text Available Service speed of a ship in real weather conditions is a basic design parameter. Forecasting of this speed at preliminary design stage is made difficult by the lack of simple but at the same accurate models of forces acting upon a ship sailing on a preset shipping route. The article presents a model for calculating forces and moment on plane rudder, useful for forecasting of ship service speed at preliminary stages of ship design.

Nuclear ship accidents

International Nuclear Information System (INIS)

Oelgaard, P.L.

1993-05-01

In this report available information on 28 nuclear ship accident and incidents is considered. Of these 5 deals with U.S. ships and 23 with USSR ships. The ships are in almost all cases nuclear submarines. Only events that involve the nuclear propulsion plants, radiation exposures, fires/explosions and sea water leaks into the submarines are considered. Comments are made on each of the events, and at the end of the report an attempt is made to point out the weaknesses of the submarine designs which have resulted in the accidents. It is emphasized that much of the available information is of a rather dubious nature. consequently some of the assessments made may not be correct. (au)

High-speed BWR power plant simulations on the special-purpose peripheral processor AD10

International Nuclear Information System (INIS)

Wulff, W.; Cheng, H.S.; Lekach, S.V.; Mallen, A.N.

1985-01-01

A newly developed technique is described for fast, on-line simulations of normal and accidental transients in nuclear power plants. The technique is based on the utilization of the special-purpose peripheral processor AD10, which is specifically designed for high-speed systems simulations through integration of large systems of nonlinear ordinary differential equations. The Peach Bottom-II Boiling Water Reactor power plant has been simulated and results are presented. It is shown that the new technique not only advances safety analyses but also supports plant monitoring, failure diagnosis and accident mitigation, as well as the training of nuclear power plant operators. (author)

MDGRAPE-4: a special-purpose computer system for molecular dynamics simulations.

Science.gov (United States)

Ohmura, Itta; Morimoto, Gentaro; Ohno, Yousuke; Hasegawa, Aki; Taiji, Makoto

2014-08-06

We are developing the MDGRAPE-4, a special-purpose computer system for molecular dynamics (MD) simulations. MDGRAPE-4 is designed to achieve strong scalability for protein MD simulations through the integration of general-purpose cores, dedicated pipelines, memory banks and network interfaces (NIFs) to create a system on chip (SoC). Each SoC has 64 dedicated pipelines that are used for non-bonded force calculations and run at 0.8 GHz. Additionally, it has 65 Tensilica Xtensa LX cores with single-precision floating-point units that are used for other calculations and run at 0.6 GHz. At peak performance levels, each SoC can evaluate 51.2 G interactions per second. It also has 1.8 MB of embedded shared memory banks and six network units with a peak bandwidth of 7.2 GB s(-1) for the three-dimensional torus network. The system consists of 512 (8×8×8) SoCs in total, which are mounted on 64 node modules with eight SoCs. The optical transmitters/receivers are used for internode communication. The expected maximum power consumption is 50 kW. While MDGRAPE-4 software has still been improved, we plan to run MD simulations on MDGRAPE-4 in 2014. The MDGRAPE-4 system will enable long-time molecular dynamics simulations of small systems. It is also useful for multiscale molecular simulations where the particle simulation parts often become bottlenecks.

Special purpose materials. Annual progress report, October 1, 1979

International Nuclear Information System (INIS)

1980-04-01

Fusion reactor materials problems other than the first-wall and blanket structural materials are investigated. Components that are considered as special purpose materials include breeding materials, coolants, neutron multipliers, barriers for tritium control, materials for compression and OH coils and waveguides, grahite and SiC, heat-sink materials, ceramics, and materials for high-field (>10-T) superconducting magnets. Radiation-induced conductivity of three forms of Al 2 O 3 was measured as a function of ionizing dose rate and temperature. Increases observed are large enough to affect performance of insulators under some fusion reactor operating conditions. Single-crystal MgAl 2 O 4 was shown to exhibit zero swelling when irradiated to approx. 2 x 10 26 n/m 2 at 925 and 1100 K. This ceramic is resistant to nucleation and growth of defect aggregates, and is not characterized by those microstructural conditions which lead to void formation and swelling in Al 2 O 3 . Fracture toughness of single-crystal Al 2 O 3 was significantly increased by elevated-temperature irradiation to approx. 2 x 10 26 n/m 2 , while that for MgAl 2 O 4 and Y 3 Al 5 O 12 showed little or no change. These results show that ceramics can retain their original resistance to crack propagation after high-dose neutron irradiation

Dutch Ships and Sailors

NARCIS (Netherlands)

de Boer, Victor; Hoekstra, F.G.; Leinenga, Jurjen; van Rossum, Matthias

2014-01-01

Dutch Ships and Sailors provides an infrastructure for maritime historical datasets, linking correlating data through semantic web technology. It brings together datasets related to recruitment and shipping in the East-India trade (mainly 18th century) and in the shipping of the northern provinces

Reactors. Nuclear propulsion ships

International Nuclear Information System (INIS)

Fribourg, Ch.

2001-01-01

This article has for object the development of nuclear-powered ships and the conception of the nuclear-powered ship. The technology of the naval propulsion P.W.R. type reactor is described in the article B.N.3 141 'Nuclear Boilers ships'. (N.C.)

Study of Green Shipping Technologies - Harnessing Wind, Waves and Solar Power in New Generation Marine Propulsion Systems

Directory of Open Access Journals (Sweden)

Grzegorz Rutkowski

2016-12-01

Full Text Available The purpose and scope of this paper is to describe the complexity of the new generation marine propulsion technologies implemented in the shipping industry to promote green ships concept and change the view of sea transportation to a more ecological and environment-friendly. Harnessing wind, waves and solar power in shipping industry can help the ship’s owners reduce the operational costs. Reducing fuel consumption results in producing less emissions and provides a clean source of renewable energy. Green shipping technologies can also effectively increase the operating range of vessels and help drive sea transportation towards a greener future and contribute to the global reduction of harmful gas emissions from the world's shipping fleets.

Ship Acquisition of Shipping Companies by Sale & Purchase Activities for Sustainable Growth: Exploratory Fuzzy-AHP Application

Directory of Open Access Journals (Sweden)

Keun-Sik Park

2018-05-01

Full Text Available Strengthening sale and purchase (S&P capacity has become a fundamental requirement for sustainable growth and corporate competitiveness in the modern shipping market. However, there is a lack of research related to S&P and its priority when shipping companies attempt to implement ship acquisition through S&P activities. To fill this gap, this paper conducts an empirical analysis to analyze priority factors during the acquisition of second-hand ships from the perspective of shipping companies. Business criteria are considered to be the most important factors in the analysis of the priority of ship acquisition and investment in shipping companies. To the best of our knowledge, this research is the first exploration covering Korean shipping companies’ ship acquisition through S&P activities. This study is expected to contribute to the better understanding of the role of S&P in ensuring the sustainability of shipping companies and to provide stakeholders with valuable insights.

Design of an adaptive backstepping controller for auto-berthing a cruise ship under wind loads

Directory of Open Access Journals (Sweden)

Park Jong-Yong

2014-06-01

Full Text Available The auto-berthing of a ship requires excellent control for safe accomplishment. Crabbing, which is the pure sway motion of a ship without surge velocity, can be used for this purpose. Crabbing is induced by a peculiar operation procedure known as the push-pull mode. When a ship is in the push-pull mode, an interacting force is induced by complex turbulent flow around the ship generated by the propellers and side thrusters. In this paper, three degrees of freedom equations of the motions of crabbing are derived. The equations are used to apply the adaptive backstepping control method to the auto-berthing controller of a cruise ship. The controller is capable of handling the system nonlinearity and uncertainty of the berthing process. A control allocation algorithm for a ship equipped with two propellers and two side thrusters is also developed, the performance of which is validated by simulation of auto-berthing.

32 CFR 700.880 - Duties of the prospective commanding officer of a ship.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Duties of the prospective commanding officer of a ship. 700.880 Section 700.880 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY REGULATIONS AND OFFICIAL RECORDS UNITED STATES NAVY REGULATIONS AND OFFICIAL RECORDS The Commanding Officer Special...

Application of Artificial Neural Networks to Ship Detection from X-Band Kompsat-5 Imagery

Directory of Open Access Journals (Sweden)

Jeong-In Hwang

2017-09-01

Full Text Available For ship detection, X-band synthetic aperture radar (SAR imagery provides very useful data, in that ship targets look much brighter than surrounding sea clutter due to the corner-reflection effect. However, there are many phenomena which bring out false detection in the SAR image, such as noise of background, ghost phenomena, side-lobe effects and so on. Therefore, when ship-detection algorithms are carried out, we should consider these effects and mitigate them to acquire a better result. In this paper, we propose an efficient method to detect ship targets from X-band Kompsat-5 SAR imagery using the artificial neural network (ANN. The method produces the ship-probability map using ANN, and then detects ships from the ship-probability map by using a threshold value. For the purpose of getting an improved ship detection, we strived to produce optimal input layers used for ANN. In order to reduce phenomena related to the false detections, the non-local (NL-means filter and median filter were utilized. The NL-means filter effectively reduced noise on SAR imagery without smoothing edges of the objects, and the median filter was used to remove ship targets in SAR imagery. Through the filtering approaches, we generated two input layers from a Kompsat-5 SAR image, and created a ship-probability map via ANN from the two input layers. When the threshold value of 0.67 was imposed on the ship-probability map, the result of ship detection from the ship-probability map was a 93.9% recall, 98.7% precision and 6.1% false alarm rate. Therefore, the proposed method was successfully applied to the ship detection from the Kompsat-5 SAR image.

Analysis of ammonia/water and ammonia/salt mixture absorption cycles for refrigeration purposes in fishing ships

International Nuclear Information System (INIS)

Táboas, Francisco; Bourouis, Mahmoud; Vallès, Manel

2014-01-01

In this work, the use of waste heat energy of jacket water in diesel engines of fishing ships was analysed for use as a heat source for absorption refrigeration systems. The thermodynamic simulation of an absorption refrigeration cycle with three different working fluid mixtures that use ammonia as a refrigerant was carried out. This analysis was assessed in terms of the cooling demand and cycle performance as a function of the evaporator, condenser and generator temperatures. Moreover, the need for rectifying the vapour stream leaving the generator was analysed together with the drag of the fraction of non-evaporated liquid to the absorber. The results show that the NH 3 /(LiNO 3  + H 2 O) and NH 3 /LiNO 3 fluid mixtures have higher values of COP as compared to NH 3 /H 2 O fluid mixture, the differences being more pronounced at low generation temperatures. If the activation temperature is set to 85 °C, the minimum evaporation temperatures that can be achieved are −18.8 °C for the cycle with NH 3 /LiNO 3 , −17.5 °C for the cycle with NH 3 /(LiNO 3  + H 2 O) cycle and −13.7 °C for the NH 3 /H 2 O cycle at a condensing temperature of 25 °C. Also, for the NH 3 /(LiNO 3  + H 2 O) fluid mixture, it has been demonstrated that the absorption refrigeration cycle can be operated without a distillation column and in this case the water content in the refrigerant stream entering the evaporator is less than 1.5% in weight at the operating conditions selected. - Highlights: •Ammonia absorption systems can provide refrigeration necessities for fishing ships. •Absorption refrigeration systems reduce the energy consumption of fishing ships. •The NH 3 /(LiNO 3  + H 2 O) mixture is recommended for absorption refrigeration cycles

How Blockchain Could Be Implemented for Exchanging Documentation in the Shipping Industry

DEFF Research Database (Denmark)

Loklindt, Christopher; Moeller, Marc-Philip; Kinra, Aseem

2018-01-01

The purpose of this study is to investigate the conditions under which blockchain technology can be adopted and the design criteria that are needed for exchanging shipping documentation in containerized shipping. To alleviate the impact of current documentation exchange mechanisms on supply chain...... efficiency in the maritime industry, this study aims at presenting guidelines for leveraging blockchain technology as a solution for exchanging documentation in the shipping industry. We conduct semi-structured interviews with representatives from business, IT, and public institutions. This qualitative data...... is analyzed through a theoretical framework comprising transaction cost economics, diffusion of innovation and design theory. Based on the theoretical model and stakeholder analysis, a set of eight design principles are proposed for the successful implementation of blockchain. These are (1) Immutability, (2...

Assembly and Alignment of Ship Power Plants in Modern Shipbuilding

OpenAIRE

A. O. Mikhailov; K. N. Morozov

2013-01-01

Fine alignment of main ship power plants mechanisms and shaft lines provides long-term and failure-free performance of propulsion system while fast and high-quality installation of mechanisms and shaft lines decreases common labor intensity. For checking shaft line allowed stress and setting its alignment it is required to perform calculations considering various stages of life cycle. In 2012 JSC SSTC developed special software complex “Shaftline” for calculation of align...

78 FR 24132 - New Mailing Standards for Live Animals and Special Handling

Science.gov (United States)

2013-04-24

... POSTAL SERVICE 39 CFR Part 111 New Mailing Standards for Live Animals and Special Handling AGENCY... require special handling service for shipments containing certain types of live animals, to limit the mail classes available for use when shipping certain types of live animals, and to expand the mailability of...

Handbook of nuclear ships

International Nuclear Information System (INIS)

1981-03-01

First, the government organs and other organizations related to nuclear ships and their tasks are described. The fundamental plan for the development of nuclear ships had been determined in July, 1963, and was revised three times thereafter. However in December, 1980, new determination to carry out the research works also was made. The course of the construction of the nuclear ship ''Mutsu'' from 1955 to 1980, the main particulars of the nuclear ship ''Mutsu'' and the drawing of the general arrangement are shown. The designated port for berthing the Mutsu was completed in 1972 in Ominato, Aomori Prefecture, but after the happening of radiation leak during the trial operation of the Mutsu in 1974, it was agreed to remove the port. The main works to be carried out at the port and the port facilities are explained. The progress of the examination of safety of the Mutsu and the result, the test of raising the power output carried out in 1974, and the course of selecting the port for making the repair works of the Mutsu are described. The law concerning Japan Nuclear Ship Research and Development Agency had been instituted in 1963, and was revised four times thereafter. The change of the budget for the tests and researches related to nuclear ships in Japan is shown. The state of development of nuclear ships in foreign countries, the international organs related to atomic energy, shipping, shipbuilding and energy, and chronological table are introduced. (Kako, I.)

Review of experiments and calculation procedures for ship collision and grounding damage

DEFF Research Database (Denmark)

Liu, Bin; Pedersen, Preben Terndrup; Zhu, Ling

2018-01-01

Abstract The paper presents a review of experiments and calculation procedures for the resistances of ship structural components subjected to impact loadings. The purpose of the paper is to highlight the importance of large-scale collision and grounding experiments and to discuss the technical...... and material characteristics. In recent literature, analytical and numerical calculations provide relatively accurate prediction of the purely plastic responses of ship structures under impact loads, but universal approaches have not been found for fracture predictions. The existing formulae for failure...

Towards a nuclear merchant ship

International Nuclear Information System (INIS)

Nicholson, R.L.R.; Llewelyn, G.I.W.; Farmer, A.A.

1976-01-01

The operation of nuclear merchant ships is likely to be attended by a number of constraints and requirements. Not all of these can be fully resolved until such ships come into use and the necessary experience and confidence have been acquired. But the timing of commercial introduction, if it comes about, will depend on the relative economics of nuclear versus fossil fuel propulsion, and the differences in turn depend in part on the operating costs particular to nuclear ships. A review of operation aspects is essential not only to commercial appraisal; each country whose trade may be carried in nuclear ships - whether it will build such ships or not - will have occasion to give some attention to the problems. It is an international problem and is, as noted later, being considered internationally. This paper; i) reviews some of the operational aspects as seen in the U.K.; ii) summarizes views received by the Nuclear Merchant Ship Unit (NMSU) from U.K. shipping, shipbuilding and nuclear industries on the prospects of a U.K. nuclear merchant ship. (author)

46 CFR 153.560 - Special requirements for Alkyl (C7-C9) nitrates.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Special requirements for Alkyl (C7-C9) nitrates. 153.560... Equipment Special Requirements § 153.560 Special requirements for Alkyl (C7-C9) nitrates. (a) The carriage temperature of octyl nitrates must be maintained below 100 °C (212 °F) in order to prevent the occurrence of a...

Establishment of the foundation for international collaborating research with US NASA FTCSC to develop space, military and special purpose food

International Nuclear Information System (INIS)

Jo, Chul Hun; Byun, Myung Woo; Lee, Ju Wun; Kim, Dong Ho; Kim, Kyung Pho; Kim, Jang Ho; Kwon, Jung Ho

2005-08-01

In the space era of 21st century, the advancement of aerospace field is essential for ensuring the national security and raising the national status. Internationally spacefood and space life support system is considered as an limitedly developed technology area. Establishment of the foundation for collaborating study with NASA FTCSC to develop space, military, and special food. Acquirement of the basis of the technology development for safe, long-term preservation of military and special purpose food to ensure national security as well as health and welfare

Shipping Information Pipeline

DEFF Research Database (Denmark)

Jensen, Thomas; Vatrapu, Ravi

2015-01-01

and national borders within international shipping which is a rather complex domain. The intellectual objective is to generate and evaluate the efficacy and effectiveness of design principles for inter-organizational information infrastructures in the international shipping domain that can have positive...

Japan nuclear ship sea trial

International Nuclear Information System (INIS)

Yamazaki, Hiroshi; Kitamura, Toshikatus; Mizushima, Toshihiko

1992-01-01

The sea trial of the first Japan nuclear Ship 'MUTSU' was conducted from the end of October to December in 1990. The purpose of the sea trial was to verify the nuclear propulsive performances and maneuverabilities. The present report describes the results of the sea trial. These results are classified into four items: 1. Speed test and engineering performance tests 2. Maneuvering performance tests 3. Vibration tests 4. Other tests. Acceptable performances were demonstrated, as expected in the original design. The experience of the use of the Global Positioning System (GPS), which were newly adopted for the sea trial, is also reported. (author)

Hygiene inspections on passenger ships in Europe - an overview

Directory of Open Access Journals (Sweden)

Bartlett Christopher LR

2010-03-01

and 20.8% (10 out of 48 of the port authorities of other countries. Conclusion This study revealed a diversity of approaches and practices in the conduct of inspections, differences in the qualifications/knowledge/experience of inspectors, the legislation applied during inspections, and the lack of communication and training among many EU countries. An integrated European inspection programme involving competent expert inspectors in each EU Member States and special training for ship hygiene delivered to crew members and inspectors would help to minimize the risk of communicable diseases. Common inspection tools at a European level for hygiene inspection practices and port-to-port communication are needed.

Hygiene inspections on passenger ships in Europe - an overview.

Science.gov (United States)

Mouchtouri, Varvara A; Westacott, Sandra; Nichols, Gordon; Riemer, Tobias; Skipp, Mel; Bartlett, Christopher L R; Kremastinou, Jenny; Hadjichristodoulou, Christos

2010-03-10

authorities of other countries. This study revealed a diversity of approaches and practices in the conduct of inspections, differences in the qualifications/knowledge/experience of inspectors, the legislation applied during inspections, and the lack of communication and training among many EU countries. An integrated European inspection programme involving competent expert inspectors in each EU Member States and special training for ship hygiene delivered to crew members and inspectors would help to minimize the risk of communicable diseases. Common inspection tools at a European level for hygiene inspection practices and port-to-port communication are needed.

Hygiene inspections on passenger ships in Europe - an overview

Science.gov (United States)

2010-01-01

of 48) of the port authorities of other countries. Conclusion This study revealed a diversity of approaches and practices in the conduct of inspections, differences in the qualifications/knowledge/experience of inspectors, the legislation applied during inspections, and the lack of communication and training among many EU countries. An integrated European inspection programme involving competent expert inspectors in each EU Member States and special training for ship hygiene delivered to crew members and inspectors would help to minimize the risk of communicable diseases. Common inspection tools at a European level for hygiene inspection practices and port-to-port communication are needed. PMID:20219097

Conceptual design studies of special-purpose equipment for Fusion Engineering Device torus-sector remote maintenance

International Nuclear Information System (INIS)

Masson, L.S.; Watts, K.D.; Aldrich, W.E.; McPherson, R.S.

1982-01-01

One of the major maintenance operations anticipated for fusion reactors of the Tokamak configuration is remote removal and replacement of torus sectors. This operation will be difficult due to the massive nature of the sector (375 tonnes), and also due to the precision with which it must be positioned within the fixed structure. The same problem, only to a lesser degree, applies to sub-components of the sector such as the limiter blades, shielding, test assemblies, etc. General and specific design requirements have been generated and trade studies conducted on reactor interfacing details as well as handling machine concepts. On the basis of the design requirements and trade studies, a perferred concept for the sector handling machine was developed. In addition, a similar machine was developed for handling the intermediate sized sector sub-components. While most operations will be performed by special purpose machines such as described above, there is a need for a versatile, relatively high capacity mobile system. A concept suitable for this mobile application was also developed as part of these studies. The general conclusion, to the extent these studies have been completed, was that special single-purpose machines will be required to perform the operations requiring high load capacity and handling precision. The machine concepts developed were felt to be within the state-of-the-art, and will make extensive use of commercially available components. The most serious problem was felt to be development of simple methods to obtain the required precision in positioning massive objects such as the torus sector

Potential impacts of shipping noise on Indo-Pacific humpback dolphins and implications for regulation and mitigation: a review.

Science.gov (United States)

Li, Songhai; Liu, Mingming; Dong, Lijun; Dong, Jianchen; Wang, Ding

2018-01-09

Shipping noise is a widespread and relatively loud sound source among human-induced underwater sounds. The impacts of shipping noise are of special concern for Indo-Pacific humpback dolphins (Sousa chinensis), as they inhabit shallow and nearshore habitats and are highly dependent on sound for survival. This study synthesizes our current understanding of the potential impacts of shipping noise on Indo-Pacific humpback dolphins combined with knowledge on sound production and hearing of these animals and the impacts of noise on other whales and dolphins. For further protection and management of Indo-Pacific humpback dolphins and their habitats, shipping noise should be regulated and mitigated to modify sound from ships, to reduce overall noise levels, and to set more marine protected areas (MPAs) covering most Indo-Pacific humpback dolphin habitats with seasonal and geographical restrictions to avoid ensonification of shipping noise. The emphasis for future research should be on obtaining more baseline information about the population distribution, sound production, hearing capabilities at the population level, behavior, and stress hormones of the humpback dolphins under different noise conditions or under different noise-producing activities, and/or in high-noise areas compared with relatively quiet areas, and the noise characteristics of ships of different types, sizes, and speeds. This article is protected by copyright. All rights reserved.

International Standardization in the Design of "Shore to Ship" - Power Supply Systems of Ships in Port

Science.gov (United States)

Tarnapowicz, Dariusz; German-Galkin, Sergiej

2018-03-01

The decisive source of air pollution emissions in ports is the berthed ships. This is primarily caused by the work of ship's autonomous generator sets. One way of reducing the air pollution emissions in ports is the supply of ships from electricity inland system. The main problem connected with the power connection of ships to the inland network is caused by different values of levels and frequencies of voltages in these networks (in various countries) in relation to different values of levels and frequencies of voltages present in the ship's network. It is also important that the source power can range from a few hundred kW up to several MW. In order to realize a universal „Shore to Ship" system that allows the connection of ships to the electricity inland network, the international standardization is necessary. This article presents the current recommendations, standards and regulations for the design of „Shore to Ship" systems.

Thermo-hydraulic characteristics of ship propulsion reactor in the conditions of ship motions and safety assessment

International Nuclear Information System (INIS)

Kobayashi, Michiyuki; Murata, Hiroyuki; Sawada, Kenichi; Inasaka, Fujio; Aya, Izuo; Shiozaki, Koki

1999-01-01

By inputting the experimental data, information and others on thermo-hydraulic characteristics of integrated ship propulsion reactor accumulated hitherto by the Ship Research Institute and some recent cooperation results into the nuclear ship engineering simulation system, it was conducted not only to contribute an improvement study on next ship reactor by executing general analysis and evaluation on motion characteristics under ship body motion conditions, safety at accidents, and others of the integrated ship reactor but also to investigate and prepare some measures to apply fundamental experiment results based on obtained here information to safety countermeasure of the nuclear ships. In 1997 fiscal year, on safety of the integrated ship propulsion reactor loading nuclear ship, by adding experimental data on unstable flow analysis and information on all around of the analysis to general data base fundamental program, development to intellectual data base program was intended; on effect of pulsation flow on thermo-hydraulic characteristics of ship propulsion reactor; after pulsation flow visualization experiment, experimental equipment was reconstructed into heat transfer type to conduct numerical analysis of pulsation flow by confirming validity of numerical analysis code under comparison with the visualization experiment results; and on thermo-hydraulic behavior in storage container at accident of active safety type ship propulsion reactor; a flashing vibration test using new apparatus finished on its higher pressurization at last fiscal year to examine effects of each parameter such as radius and length of exhausting nozzle and pool water temperature. (G.K.)

Special from encapsulation for radioactive material shipments from Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Schaich, R.W.

1980-01-01

Special Form encapsulation has been used at Oak Ridge National Laboratory to ship radioactive solids for the past fifteen years. A family of inexpensive stainless steel containers has been developed and tested to meet the USA Department of Transportation (DOT) and the International Atomic Energy Agency (IAEA) regulations concerning radioactive material shipments as Special Form

Trends in oil spills from tanker ships 1995-2004

International Nuclear Information System (INIS)

Huijer, K.

2005-01-01

The trends in oil spills around the world over from 1995 to 2004 were examined and analyzed for possible influences on spill volumes and frequencies for incidents of 3 spill size classes. The International Tanker Owners Pollution Federation (ITOPF) has maintained a database since 1974 of all oil spills from tankers, combined carriers and barges. The number of oil spills has decreased significantly in the last 30 years despite a steady increase in maritime oil trade since the 1980s. The recent trends were identified by causes, locations, oil type, and shipping legislation. The causes include ship loading/discharging, bunkering, collisions, groundings, hull failures and fires. The types of oil spilt include bunker, crude, cargo fuel, white product and some unknowns. It was concluded that the decline in oil spills is due to a range of initiatives taken by governments and the shipping industry rather than any one factor. Some notable influences towards reduced number of spills include: the international convention for the prevention of pollution from ships of 1972, as modified by the Protocol of 1978; the international convention for the safety of life at sea of 1974; and the Oil Pollution Act of 1990. Results of investigations into the causes of spills serve the purpose of informing the international process to further prevent and reduce marine oil pollution due to tankers. 7 refs., 5 tabs., 12 figs

46 CFR 386.17 - Photographs for news, advertising, or commercial purposes.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Photographs for news, advertising, or commercial... § 386.17 Photographs for news, advertising, or commercial purposes. Such photographs for news... Court Order or rule prohibits, photographs for news purposes may be taken in entrances, lobbies, foyers...

The Human Element and Autonomous Ships

Directory of Open Access Journals (Sweden)

Sauli Ahvenjärvi

2016-09-01

Full Text Available The autonomous ship technology has become a “hot” topic in the discussion about more efficient, environmentally friendly and safer sea transportation solutions. The time is becoming mature for the introduction of commercially sensible solutions for unmanned and fully autonomous cargo and passenger ships. Safety will be the most interesting and important aspect in this development. The utilization of the autonomous ship technology will have many effects on the safety, both positive and negative. It has been announced that the goal is to make the safety of an unmanned ship better that the safety of a manned ship. However, it must be understood that the human element will still be present when fully unmanned ships are being used. The shore-based control of a ship contains new safety aspects and an interesting question will be the interaction of manned and unmanned ships in the same traffic area. The autonomous ship technology should therefore be taken into account on the training of seafarers. Also it should not be forgotten that every single control algorithm and rule of the internal decision making logic of the autonomously navigating ship has been designed and coded by a human software engineer. Thus the human element is present also in this point of the lifetime navigation system of the autonomous ship.

Tourist ships on the Danube as an opportunity for export of meat and meat products

Directory of Open Access Journals (Sweden)

Tešanović Dragan

2015-01-01

Full Text Available Tourism development launches growth of other complementary industries. River tourism, as a special selective tourism form, experiences intensive development, with an importance for all the regions through which the Danube, as an integral part of the Rhine - Main - Danube waterway, flows. During cruising, the largest consumption is achieved on the ship itself, where meat and meat products are an integral element of every meal and represent the most expensive component of the dish. The task of this paper is to analyse the consumption of meat and meat products on six tourist ships run by to 'Grand Circle Corporation' in 2013, in order to point out the possibility of supplying them with meat and meat products from sources in the territory where the ships sail. The paper presents the current suppliers and manufacturers of meat and meat products in Republic of Serbia that could supply the company 'Grand Circle Cruise Line' and other tourist ships that cruise on the Danube. Also, the research indicates that the export of meat products from the Republic Serbia could have a significant effect on improving the agricultural conditions and food production through increased competition, assuming the Serbian manufacturers supply most of tourist ships and not only the six ships analysed in this paper. Research results, specifically, point out the possibility of increasing export of poultry and beef if the potential demand of each of the eight companies with their 54 ships which operate tourist cruises on the Danube is taken into account. The data have been systematized, analysed and presented statistically in tables and graphs.

Status of the Beneficial Uses Shipping System cask (BUSS)

International Nuclear Information System (INIS)

Yoshimura, H.R.; Eakes, R.G.; Bronowski, D.R.

1994-01-01

The Beneficial Uses Shipping System cask is a Type B packaging developed by Sandia National Laboratories for the U.S. Department of Energy. The cask is designed to transport special form radioactive source capsules (cesium chloride and strontium fluoride) produced by the Department of Energy's Hanford Waste Encapsulation and Storage Facility. This paper describes the cask system and the analyses performed to predict the response of the cask in impact, puncture, and fire accident conditions as specified in the regulations. The cask prototype has been fabricated and Certificates of Compliance have been obtained

32 CFR 57.1 - Purpose.

Science.gov (United States)

2010-07-01

... Individualized Educational Programs (IEP). (4) Monitoring of DoD programs providing EIS, special education, and... INTERVENTION AND SPECIAL EDUCATION SERVICES TO ELIGIBLE DOD DEPENDENTS § 57.1 Purpose. This part: (a... with disabilities (birth through 2 years, inclusive) and their families, and special education and...

A review of outbreaks of waterborne disease associated with ships: evidence for risk management.

Science.gov (United States)

Rooney, Roisin M; Bartram, Jamie K; Cramer, Elaine H; Mantha, Stacey; Nichols, Gordon; Suraj, Rohini; Todd, Ewen C D

2004-01-01

The organization of water supply to and on ships differs considerably from that of water supply on land. Risks of contamination can arise from source water at the port or during loading, storage, or distribution on the ship. The purpose of this article is to review documented outbreaks of waterborne diseases associated with passenger, cargo, fishing, and naval ships to identify contributing factors so that similar outbreaks can be prevented in the future. The authors reviewed 21 reported outbreaks of waterborne diseases associated with ships. For each outbreak, data on pathogens/toxins, type of ship, factors contributing to outbreaks, mortality and morbidity, and remedial action are presented. The findings of this review show that the majority of reported outbreaks were associated with passenger ships and that more than 6,400 people were affected. Waterborne outbreaks due to Enterotoxigenic Escherichia coli, noroviruses, Salmonella spp, Shigella sp, Cryptosporidium sp, and Giardia lamblia occurred on ships. Enterotoxigenic E. coli was the pathogen most frequently associated with outbreaks. One outbreak of chemical water poisoning also occurred on a ship. Risk factors included contaminated port water, inadequate treatment, improper loading techniques, poor design and maintenance of storage tanks, ingress of contamination during repair and maintenance, cross-connections, back siphonage, and insufficient residual disinfectant. Waterborne disease outbreaks on ships can be prevented. The factors contributing to outbreaks emphasize the need for hygienic handling of water along the supply chain from source to consumption. A comprehensive approach to water safety on ships is essential. This may be achieved by the adoption of Water Safety Plans that cover design, construction, operation, and routine inspection and maintenance.

Advanced Demonstration of Motion Correction for Ship-to-Ship Passive Inspections

Energy Technology Data Exchange (ETDEWEB)

Ziock, Klaus-Peter [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Boehnen, Chris Bensing [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ernst, Joseph [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2013-09-30

Passive radiation detection is a key tool for detecting illicit nuclear materials. In maritime applications it is most effective against small vessels where attenuation is of less concern. Passive imaging provides: discrimination between localized (threat) and distributed (non-threat) sources, removal of background fluctuations due to nearby shorelines and structures, source localization to an individual craft in crowded waters, and background subtracted spectra. Unfortunately, imaging methods cannot be easily applied in ship-to-ship inspections because relative motion of the vessels blurs the results over many pixels, significantly reducing sensitivity. This is particularly true for the smaller water craft where passive inspections are most valuable. In this project we performed tests and improved the performance of an instrument (developed earlier under, “Motion Correction for Ship-to-Ship Passive Inspections”) that uses automated tracking of a target vessel in visible-light images to generate a 3D radiation map of the target vessel from data obtained using a gamma-ray imager.

46 CFR 280.9 - Special rules for last year of ODS agreement.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Special rules for last year of ODS agreement. 280.9... LINER OPERATORS § 280.9 Special rules for last year of ODS agreement. (a) Reduction in payment of ODS. ODS payable during the last year of any ODS agreement shall be reduced, as provided in paragraph (b...

An assessment of simplified methods to determine damage from ship-to-ship collisions

International Nuclear Information System (INIS)

Parks, M.B.; Ammerman, D.J.

1996-01-01

Sandia National Laboratories (SNL) is studying the safety of shipping, radioactive materials (RAM) by sea, the SeaRAM project (McConnell, et al. 1995), which is sponsored by the US Department of Energy (DOE). The project is concerned with the potential effects of ship collisions and fires on onboard RAM packages. Existing methodologies are being assessed to determine their adequacy to predict the effect of ship collisions and fires on RAM packages and to estimate whether or not a given accident might lead to a release of radioactivity. The eventual goal is to develop a set of validated methods, which have been checked by comparison with test data and/or detailed finite element analyses, for predicting the consequences of ship collisions and fires. These methods could then be used to provide input for overall risk assessments of RAM sea transport. The emphasis of this paper is on methods for predicting- effects of ship collisions

Analysis of International Commodity Shipping Data and the Shipment of NORM to the United States

International Nuclear Information System (INIS)

Baciak, James E.; Ely, James H.; Schweppe, John E.; Sandness, Gerald A.; Robinson, Sean M.

2011-01-01

As part of the Spreader Bar Radiation Detector project, PNNL analyzed US import data shipped through US ports collected over the 12 months of 2006 (over 4.5 million containers). Using these data, we extracted a variety of distributions that are of interest to modelers and developers of active and passive detection systems used to 'scan' IMCCs for potential contraband. This report expands on some of the analysis presented in an earlier report from LLNL, by investigation the foreign port distribution of commodities shipped to the US. The majority of containers shipped to the United States are 40 ft containers (∼70%); about 25% are 20 ft; and about 3.6% are 45 ft containers. A small fraction (<1%) of containers are of other more specialized sizes, and very few ports actually ship these unique size containers (a full distribution for all foreign ports is shown in Appendix A below). The primary foreign ports that ship the largest fraction of each container are shown in the table below. Given that 45 ft containers comprise 1 of out every 27 containers shipped to the US, and given the foreign ports from which they are shipped, they should not be ignored in screening; further testing and analysis of radiation measurements for national security with this size container is warranted. While a large amount of NORM is shipped in IMCCs, only a few specific commodities are shipped with enough frequency to present potential issues in screening IMCCs at ports. The majority of containers with NORM will contain fertilizers (5,700 containers), granite (59,000 containers), or ceramic (225,000 containers) materials. Fertilizers were generally shipping in either 20- or 40 ft containers with equal frequency. While granite is mostly shipped in 20 ft containers, ceramic materials can be shipped in either 20- or 40 ft containers. The size of container depended on the specific use of the ceramic or porcelain material. General construction ceramics (such as floor and roofing tiles) tend to

Analysis of International Commodity Shipping Data and the Shipment of NORM to the United States

Energy Technology Data Exchange (ETDEWEB)

Baciak, James E.; Ely, James H.; Schweppe, John E.; Sandness, Gerald A.; Robinson, Sean M.

2011-10-01

As part of the Spreader Bar Radiation Detector project, PNNL analyzed US import data shipped through US ports collected over the 12 months of 2006 (over 4.5 million containers). Using these data, we extracted a variety of distributions that are of interest to modelers and developers of active and passive detection systems used to 'scan' IMCCs for potential contraband. This report expands on some of the analysis presented in an earlier report from LLNL, by investigation the foreign port distribution of commodities shipped to the US. The majority of containers shipped to the United States are 40 ft containers ({approx}70%); about 25% are 20 ft; and about 3.6% are 45 ft containers. A small fraction (<1%) of containers are of other more specialized sizes, and very few ports actually ship these unique size containers (a full distribution for all foreign ports is shown in Appendix A below). The primary foreign ports that ship the largest fraction of each container are shown in the table below. Given that 45 ft containers comprise 1 of out every 27 containers shipped to the US, and given the foreign ports from which they are shipped, they should not be ignored in screening; further testing and analysis of radiation measurements for national security with this size container is warranted. While a large amount of NORM is shipped in IMCCs, only a few specific commodities are shipped with enough frequency to present potential issues in screening IMCCs at ports. The majority of containers with NORM will contain fertilizers (5,700 containers), granite (59,000 containers), or ceramic (225,000 containers) materials. Fertilizers were generally shipping in either 20- or 40 ft containers with equal frequency. While granite is mostly shipped in 20 ft containers, ceramic materials can be shipped in either 20- or 40 ft containers. The size of container depended on the specific use of the ceramic or porcelain material. General construction ceramics (such as floor and roofing

High cost for drilling ships

International Nuclear Information System (INIS)

Hooghiemstra, J.

2007-01-01

Prices for the rent of a drilling ship are very high. Per day the rent is 1% of the price for building such a ship, and those prices have risen as well. Still, it is attractive for oil companies to rent a drilling ship [nl

Accidents in nuclear ships

Energy Technology Data Exchange (ETDEWEB)

Oelgaard, P L [Risoe National Lab., Roskilde (Denmark); [Technical Univ. of Denmark, Lyngby (Denmark)

1996-12-01

This report starts with a discussion of the types of nuclear vessels accidents, in particular accidents which involve the nuclear propulsion systems. Next available information on 61 reported nuclear ship events in considered. Of these 6 deals with U.S. ships, 54 with USSR ships and 1 with a French ship. The ships are in almost all cases nuclear submarines. Only events that involve the sinking of vessels, the nuclear propulsion plants, radiation exposures, fires/explosions, sea-water leaks into the submarines and sinking of vessels are considered. For each event a summary of available information is presented, and comments are added. In some cases the available information is not credible, and these events are neglected. This reduces the number of events to 5 U.S. events, 35 USSR/Russian events and 1 French event. A comparison is made between the reported Soviet accidents and information available on dumped and damaged Soviet naval reactors. It seems possible to obtain good correlation between the two types of events. An analysis is made of the accident and estimates are made of the accident probabilities which are found to be of the order of 10{sup -3} per ship reactor years. It if finally pointed out that the consequences of nuclear ship accidents are fairly local and does in no way not approach the magnitude of the Chernobyl accident. It is emphasized that some of the information on which this report is based, may not be correct. Consequently some of the results of the assessments made may not be correct. (au).

Accidents in nuclear ships

International Nuclear Information System (INIS)

Oelgaard, P.L.

1996-12-01

This report starts with a discussion of the types of nuclear vessels accidents, in particular accidents which involve the nuclear propulsion systems. Next available information on 61 reported nuclear ship events in considered. Of these 6 deals with U.S. ships, 54 with USSR ships and 1 with a French ship. The ships are in almost all cases nuclear submarines. Only events that involve the sinking of vessels, the nuclear propulsion plants, radiation exposures, fires/explosions, sea-water leaks into the submarines and sinking of vessels are considered. For each event a summary of available information is presented, and comments are added. In some cases the available information is not credible, and these events are neglected. This reduces the number of events to 5 U.S. events, 35 USSR/Russian events and 1 French event. A comparison is made between the reported Soviet accidents and information available on dumped and damaged Soviet naval reactors. It seems possible to obtain good correlation between the two types of events. An analysis is made of the accident and estimates are made of the accident probabilities which are found to be of the order of 10 -3 per ship reactor years. It if finally pointed out that the consequences of nuclear ship accidents are fairly local and does in no way not approach the magnitude of the Chernobyl accident. It is emphasized that some of the information on which this report is based, may not be correct. Consequently some of the results of the assessments made may not be correct. (au)

Trends of shipping markets development

Directory of Open Access Journals (Sweden)

Tomasz Nowosielski

2012-06-01

Full Text Available Shipping markets are dependent on international trade transactions that generate transport needs. These needs can dynamically change depending on global natural resources and commodity markets situation. The changes affecting shipping markets can also be caused by changes to the existing cargo flows and by establishing new ones in different geographies. It is anticipated that in the future shipping markets will change, visible by a decline in shipping in North America and Europe and an increase in Asia.

Advanced ship systems condition monitoring for enhanced inspection, maintenance and decision making in ship operations

OpenAIRE

Lazakis, Iraklis; Dikis, Konstantinos; Michala, Anna Lito; Theotokatos, Gerasimos

2016-01-01

Structural and machinery failures in the day-to-day ship operations may lead to major accidents, endangering crew and\\ud passengers onboard, posing a threat to the environment, damaging the ship itself and having a great impact in terms of business\\ud losses. In this respect, this paper presents the INCASS (Inspection Capabilities for Enhanced Ship Safety) project which aims\\ud bringing an innovative solution to the ship inspection regime through the introduction of enhanced inspection of shi...

46 CFR 167.30-10 - Special operating requirements.

Science.gov (United States)

2010-10-01

..., (3) Within or on the boundaries of fuel tanks; or, (4) To pipe lines, heating coils, pumps, fittings, or other appurtenances connected to such cargo or fuel tanks. (c) Such inspections shall be made and... SCHOOL SHIPS Repairs or Alterations § 167.30-10 Special operating requirements. Inspection and testing...

Guide to ship sanitation

National Research Council Canada - National Science Library

2011-01-01

"The third edition of the Guide to Ship Sanitation presents the public health significance of ships in terms of disease and highlights the importance of applying appropriate control measures"--Back cover...

Safety considerations in the use of ports and approaches by nuclear merchant ships

International Nuclear Information System (INIS)

1968-01-01

The purpose of this publication is to provide guidance to Governments and Port Authorities on the various procedures and precautionary measures that may be employed when nuclear merchant ships use ports and approaches. The problem is basically that of siting a nuclear reactor in a populated area, with the extra factor of mobility. Added to this is the fact that the safety standards of the nuclear ship may be those of a country other than that of the port of entry. Thus the problem must be solved in international agreements.

Cybersecurity Framework for Ship Industrial Control System

OpenAIRE

Maule, R. William; Hake, Joseph

2016-01-01

Ship mechanical and electrical control systems, and the communications grid through which these devices operate, are a high priority concern for Navy leadership. Ship systems use microprocessor-based controls to interface with physical objects, and Programmable Logic Controllers (PLCs) to automate ship electromechanical processes. Ship operations are completely dependent on these devices. The commercial security products upon which ships depend do not work on ICS, leaving ships vulnerable. Th...

Containment of spills from ships

International Nuclear Information System (INIS)

Engerer, M.J.

1992-01-01

Oil escaping from a ship is contained within a limited area surrounding the ship by means of a flexible ring structure. The ring structure is stored in a collapsed state in a compartment extending around the ship. In response to an oil spill, the ring structure is dropped from the compartment and immediately surrounds the ship. A circular inflatable flotation section of the ring structure is charged with gas under pressure. The gas is supplied from a bottle cascade aboard the ship, through lines preconnected to the flotation section and paid out from free-wheeling reels. The flotation section supports a thin circumferential wall of predetermined height that submerges and assumes a vertical cylinder-like shape surrounding the escaping oil. The oil floats within the confines of the ring structure, and the ring structure is progressively expanded to a predetermined size selected to accommodate the total volume of oil carried by the ship. When the ring structure achieves its expanded state, pressure in the flotation section is raised to render the structure relatively rigid and resistant to collapse in response to wave action. Oil can be removed from the interior of the ring structure by recovery ships using suction lines or other conventional recovery methods. 12 figs

Real-Time Simulation of Ship-Structure and Ship-Ship Interaction

DEFF Research Database (Denmark)

Lindberg, Ole; Glimberg, Stefan Lemvig; Bingham, Harry B.

2013-01-01

, because it is simple, easy to implement and computationally efficient. Multiple many-core graphical processing units (GPUs) are used for parallel execution and the model is implemented using a combination of C/C++, CUDA and MPI. Two ship hydrodynamic cases are presented: Kriso Container Carrier at steady...

Medical doctors as the captain of a ship: an analysis of medical students? book reports on Joseph Conrad?s ?Lord Jim?

OpenAIRE

Hwang, Kun; Lee, Seung Jae; Kim, Seong Yeon; Hwang, Se Won; Kim, Ae Yang

2014-01-01

Purpose: In South Korean ferry disaster in 2014, the captain abandoned the ship with passengers including high school students still aboard. We noticed the resemblance of abandoning the ship with passengers still aboard the ferry (named the Sewol) and the ship Patna, which was full of pilgrims, in Joseph Conrad’s novel “Lord Jim.” The aim of this study is to see how medical students think about the role of a medical doctor as a captain of a ship by analyzing book reports on Conrad’s “Lord Jim...

Study on variation in ship's forward speed under regular waves depending on rudder controller

Directory of Open Access Journals (Sweden)

Sung-Soo Kim

2015-03-01

Full Text Available The purpose of this research is to compare and analyze the advanced speed of ships with different rudder controller in wavy condition by using a simulation. The commercial simulation tool named AQWA is used to develop the simulation of ship which has 3 degree of freedom. The nonlinear hydrodynamic force acting on hull, the propeller thrust and the rudder force are calculated by the additional subroutine which interlock with the commercial simulation tool, and the regular wave is used as the source of the external force for the simulation. Rudder rotational velocity and autopilot coefficients vary to make the different rudder controller. An advanced speed of ships depending on the rudder controller is analyzed after the autopilot simulations.

EX1001 Ship Shakedown (EX1001, EM302) on NOAA Ship Okeanos Explorer in Hawaiian Islands

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The ship has been alongside for repairs and leave since November, 2009. The ship shakedown cruise is scheduled to provide an opportunity for the ship to get underway...

46 CFR 148.02-1 - Shipping papers.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Shipping papers. 148.02-1 Section 148.02-1 Shipping... MATERIALS IN BULK Vessel Requirements § 148.02-1 Shipping papers. (a) Carriers may not accept for..., unless the hazardous materials offered for such shipment is accompanied by a shipping paper on which the...

Naval Ship Database: Database Design, Implementation, and Schema

Science.gov (United States)

2013-09-01

ClassId Class identifier Name Ship name Pendant Ship pendant CommissionDate Ship commission date DecommissionDate Ship decommission date; NULL if still...active FlagshipId Ship Id of the ship Figure 3: Ship table definition Table 3: Ship table example rows Id Prefix ClassId Name Pendant ...computation if required. A bridged connection will allow computation analysis to be done in Matlab and allow the processed data to be imported back

Ship Technology Workshop Materials from Collaboration with Mexico to Reduce Emissions from Ships

Science.gov (United States)

On September 26, 2012, a ship technology seminar was held to provide Mexican stakeholders with information about some of the ship technologies needed to meet the requirements of MARPOL Annex VI and an ECA.

Fast ship

OpenAIRE

Keuning, J.A.

2014-01-01

The invention concerns a ship whereby the hull and the mechanical propulsion device are designed such that the Froude number is larger than 0.5. In the aft ship the hull has a bottom with V-shaped bottom surfaces with a deadrise angle that is less than 40 degrees and the hull has substantially vertical sides. In the hull are a passenger compartment and a trim tank. The trim tank volume is such that the weight of a filled trim tank is more than 30 % of the weight of displacement of the hull wi...

RISK ANALYSIS FOR SHIP CONVERTING PROJECT ACCOMPLISHMENT (Case study of KRI KP Converting Project

Directory of Open Access Journals (Sweden)

Dimas Endro W

2013-10-01

Full Text Available Ship converting has become as prospective activity in ship building area. Operational and economical aspect are the most dominant rationale. Baseon a new fuction of converted ship, a task list which contain several jobs that must be done is listed. This accomplishment schedule not only contain a task list, but also duration for certain job title. In practical apllication job duration is maintained based on experience of project manager.  Further more, total accomplish duration is setted as time accomplishment for the project. This setted time has become reference for the project bid. Occasionaly, if accomplishment time which offered is strict, than schedule slip become as potencial nightmare. For this situation, project manager has had a cristal clearconsideration to select a proper decision wheter he will take the tender offer or not. practically, project mananger has layed on his experience to handle previous project and face  penalty if the project delayed. This paper focussed on how to measure tender offer based on risk analysis, specially for converted ship tender which has a strike time accomplishment.A new application method to analysis proposed tender based on time and penalty parameter has become a topic of this paper.

46 CFR 151.45-7 - Shipping papers.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Shipping papers. 151.45-7 Section 151.45-7 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Operations § 151.45-7 Shipping papers. Each barge carrying... towing vessel shall either have a copy of the shipping papers for each barge in his tow or he shall make...

Behavior analysis of container ship in maritime accident in order to redefine the operating criteria

Science.gov (United States)

Ancuţa, C.; Stanca, C.; Andrei, C.; Acomi, N.

2017-08-01

In order to enhance the efficiency of maritime transport, container ships operators proceeded to increase the sizes of ships. The latest generation of ships in operation has 19,000 TEU capacity and the perspective is 21,000 TEU within the next years. The increasing of the sizes of container ships involves risks of maritime accidents occurrences. Nowadays, the general rules on operational security, tend to be adjusted as a result of the evaluation for each vessel. To create the premises for making an informed decision, the captain have to be aware of ships behavior in such situations. Not less important is to assure permanent review of the procedures for operation of ship, including the specific procedures in special areas, confined waters or separation schemes. This paper aims at analysing the behavior of the vessel and the respond of the structure of a container ship in maritime accident, in order to redefine the operating criteria. The method selected by authors for carrying out the research is computer simulations. Computer program provides the responses of the container ship model in various situations. Therefore, the simulations allow acquisition of a large category of data, in the scope of improving the prevention of accidents or mitigation of effects as much as possible. Simulations and assessments of certain situations that the ship might experience will be carried out to redefine the operating criteria. The envisaged scenarios are: introducing of maneuver speed for specific areas with high risk of collision or grounding, introducing of flooding scenarios of some compartments in loading programs, conducting of complex simulations in various situations for each vessel type. The main results of this work are documented proposals for operating criteria, intended to improve the safety in case of marine accidents, collisions and groundings. Introducing of such measures requires complex cost benefit analysis, that should not neglect the extreme economic impact

The investigation of ship maneuvering with hydrodynamic effects between ships in curved narrow channel

Directory of Open Access Journals (Sweden)

Chun-Ki Lee

2016-01-01

Full Text Available The hydrodynamic interaction between two large vessels can't be neglected when two large vessels are closed to each other in restricted waterways such as in a harbor or narrow channel. This paper is mainly concerned with the ship maneuvering motion based on the hydrodynamic interaction effects between two large vessels moving each other in curved narrow channel. In this research, the characteristic features of the hydrodynamic interaction forces between two large vessels are described and illustrated, and the effects of velocity ratio and the spacing between two vessels are summarized and discussed. Also, the Inchon outer harbor area through the PALMI island channel in Korea was selected, and the ship maneuvering simulation was carried out to propose an appropriate safe speed and distance between two ships, which is required to avoid sea accident in confined waters. From the inspection of this investigation, it indicates the following result. Under the condition of SP12≤0.5L, it may encounter a dangerous tendency of grounding or collision due to the combined effect of the interaction between ships and external forces. Also considering the interaction and wind effect as a parameter, an overtaken and overtaking vessel in narrow channel can navigate while keeping its own original course under the following conditions; the lateral separation between two ships is about kept at 0.6 times of ship length and 15 degrees of range in maximum rudder angle. On the other hand, two ships while overtaking in curved narrow channel such as Inchon outer harbor in Korea should be navigated under the following conditions; SP12 is about kept at 1.0 times of ship length and the wind velocity should not be stronger than 10 m/s.

Optimization in liner shipping

DEFF Research Database (Denmark)

Brouer, Berit Dangaard; Karsten, Christian Vad; Pisinger, David

2017-01-01

Seaborne trade is the lynchpin in almost every international supply chain, and about 90% of non-bulk cargo worldwide is transported by container. In this survey we give an overview of data-driven optimization problems in liner shipping. Research in liner shipping is motivated by a need for handling...... still more complex decision problems, based on big data sets and going across several organizational entities. Moreover, liner shipping optimization problems are pushing the limits of optimization methods, creating a new breeding ground for advanced modelling and solution methods. Starting from liner...... shipping network design, we consider the problem of container routing and speed optimization. Next, we consider empty container repositioning and stowage planning as well as disruption management. In addition, the problem of bunker purchasing is considered in depth. In each section we give a clear problem...

Ship construction and welding

CERN Document Server

Mandal, Nisith R

2017-01-01

This book addresses various aspects of ship construction, from ship types and construction materials, to welding technologies and accuracy control. The contents of the book are logically organized and divided into twenty-one chapters. The book covers structural arrangement with longitudinal and transverse framing systems based on the service load, and explains basic structural elements like hatch side girders, hatch end beams, stringers, etc. along with structural subassemblies like floors, bulkheads, inner bottom, decks and shells. It presents in detail double bottom construction, wing tanks & duct keels, fore & aft end structures, etc., together with necessary illustrations. The midship sections of various ship types are introduced, together with structural continuity and alignment in ship structures. With regard to construction materials, the book discusses steel, aluminum alloys and fiber reinforced composites. Various methods of steel material preparation are discussed, and plate cutting and form...

Potential of biofuels for shipping. Final Report

Energy Technology Data Exchange (ETDEWEB)

Florentinus, A.; Hamelinck, C.; Van den Bos, A.; Winkel, R.; Cuijpers, M. [Ecofys Netherlands, Utrecht (Netherlands)

2012-01-15

Biofuels could be one of the options to realize a lower carbon intensity in the propulsion of ships and also possibly reduce the effect of ship emissions on local air quality. Therefore, EMSA, the European Maritime Safety Agency, is evaluating if and how biofuels could be used in the shipping sector as an alternative fuel. To determine the potential of biofuels for ships, a clearer picture is needed on technical and organizational limitations of biofuels in ships, both on board of the ship as in the fuel supply chain to the ship. Economic and sustainability analysis of biofuels should be included in this picture, as well as an overview on current and potential policy measures to stimulate the use of biofuels in shipping. Ecofys has determined the potential of biofuels, based on analysis of collected data through literature review, own expertise and experiences, direct communication with EMSA, research publications, market developments based on press and other media, and consultations with relevant stakeholders in the shipping market.

Thermo-hydraulic characteristics of ship propulsion reactor in the conditions of ship motions and safety assessment

International Nuclear Information System (INIS)

Kobayashi, Michiyuki; Aya, Izuo; Inasaka, Fujio; Murata, Hiroyuki; Odano, Naoteru; Shiozaki, Koki

1998-01-01

A research project from 1995-1999 had a plan to make experimental studies on (1) safety of nuclear ship loaded with an integral ship propulsion reactor (2) effects of pulsating flow on the thermo-hydraulic characteristics of ship propulsion reactor and (3) thermo-hydraulic behaviors of the reactor container at the time of accident in a passively safe ship propulsion reactor. Development of a data base for ship propulsion reactor was attempted using previous experimental data on the thermo-hydraulic characteristics of the reactor in the institute in addition to the present results aiming to make general analytical evaluation for the safety of the engineering-simulation system for nuclear ship. A general data base was obtained by integrating the data list and the analytical program for static characteristics. A test equipment which allows to visualize the pulsating flow was produced and visualization experiments have started. (M.N.)

Lead sheathing of ship hulls in the Roman period: Archaeometallurgical characterisation

Energy Technology Data Exchange (ETDEWEB)

Kahanov, Yaacov, E-mail: yak@research.haifa.ac.il [Leon Recanati Institute for Maritime Studies, University of Haifa, Haifa 31905 (Israel); Ashkenazi, Dana [Faculty of Engineering, Tel Aviv University, Ramat Aviv 69978 (Israel)

2011-08-15

An archaeometallurgical analysis of samples of lead sheathing from five ships of the Roman period was carried out in order to determine their composition and microstructure, and to obtain a better understanding of their manufacturing processes. The examinations included optical microscopy of metallographic cross-sections, microhardness tests, scanning electron microscopy, including energy dispersive spectroscopy, and X-ray photoelectron spectroscopy. The results show that the samples were all composed of lead covered with an oxide layer. The sheet thicknesses, microhardness values and microhardness distribution, as well as the grain size distribution, led to the conclusion that all of the sheets were produced by the same technology, using hammering, and were probably used for the same purpose. The presence of antimony was observed in the sample from the Roman ship from Caesarea, which may hint at an Italian (Sardinian) origin of the material, and perhaps of the ship. - Research Highlights: {yields} During the Roman period ship hulls were sheathed with lead. {yields} Five samples have been analysed for their characteristics and manufacturing process. {yields} The process was cold-working (strain-hardening) using hammering. {yields} The lead was open-casted on a flat stone, and later hammered at room temperature. {yields} Antimony in the Caesarea shipwreck may indicate an Italian origin of construction.

A Fully Nonlinear, Dynamically Consistent Numerical Model for Solid-Body Ship Motion. I. Ship Motion with Fixed Heading

Science.gov (United States)

Lin, Ray-Quing; Kuang, Weijia

2011-01-01

In this paper, we describe the details of our numerical model for simulating ship solidbody motion in a given environment. In this model, the fully nonlinear dynamical equations governing the time-varying solid-body ship motion under the forces arising from ship wave interactions are solved with given initial conditions. The net force and moment (torque) on the ship body are directly calculated via integration of the hydrodynamic pressure over the wetted surface and the buoyancy effect from the underwater volume of the actual ship hull with a hybrid finite-difference/finite-element method. Neither empirical nor free parametrization is introduced in this model, i.e. no a priori experimental data are needed for modelling. This model is benchmarked with many experiments of various ship hulls for heave, roll and pitch motion. In addition to the benchmark cases, numerical experiments are also carried out for strongly nonlinear ship motion with a fixed heading. These new cases demonstrate clearly the importance of nonlinearities in ship motion modelling.

ν{sub τ}-physics with the SHiP experiment

Energy Technology Data Exchange (ETDEWEB)

Bick, Daniel; Bieschke, Stefan; Ebert, Joachim; Hagner, Caren; Schmidt-Parzefall, Walter [Universitaet Hamburg, Institut fuer Experimentalphysik, Luruper Chaussee 149, 22761 Hamburg (Germany)

2016-07-01

SHiP stands for Search for Hidden Particles and is a recently proposed new general-purpose fixed target facility at the SPS at CERN. The main aim is the search for hidden particles predicted by different models capable of explaining dark matter, neutrino masses or the origin of baryon asymmetry in the Universe. Furthermore, a huge number of (τ-)neutrinos will be produced at such a facility making it an ideal place for ν{sub τ}-physics and thus giving the opportunity for a measurement of the τ-neutrino cross-sections or a first-time experimental evidence of the anti-τ-neutrino. This talk will give an overview of the neutrino experiment at the SHiP experiment. An emphasis is given to the reconstruction of muons from interactions in the neutrino target using a magnetic spectrometer.

A Method for Ship Collision Damage and Energy Absorption Analysis and its Validation

DEFF Research Database (Denmark)

Zhang, Shengming; Pedersen, Preben Terndrup

2017-01-01

For design evaluation, there is a need for a method which is fast, practical and yet accurate enough to deter-mine the absorbed energy and collision damage extent in ship collision analysis. The most well-known sim-plified empirical approach to collision analysis was made probably by Minorsky......, and its limitation is alsowell-recognised. The authors have previously developed simple expressions for the relation between theabsorbed energy and the damaged material volume which take into account the structural arrangements,the material properties and the damage modes. The purpose of the present paper...... is to re-examine thismethod’s validity and accuracy for ship collision damage analysis in ship design assessments by compre-hensive validations with experimental results from the public domain. In total, 20 experimental tests havebeen selected, analysed and compared with the results calculated using...

Enhancing Maritime Education and Training: Measuring a Ship Navigator's Stress Based on Salivary Amylase Activity

Science.gov (United States)

Murai, Koji; Wakida, Shin-Ichi; Miyado, Takashi; Fukushi, Keiichi; Hayashi, Yuji; Stone, Laurie C.

2009-01-01

Purpose: The purpose of this paper is to propose that the measurement of salivary amylase activity is an effective index to evaluate the stress of a ship navigator for safe navigation training and education. Design/methodology/approach: Evaluation comes from the simulator and actual on-board experiments. The subjects are real captains who have…

Identification of Dynamically Positioned Ships

Directory of Open Access Journals (Sweden)

Thor I. Fossen

1996-04-01

Full Text Available Todays model-based dynamic positioning (DP systems require that the ship and thruster dynamics are known with some accuracy in order to use linear quadratic optical control theory. However, it is difficult to identify the mathematical model of a dynamically posititmed (DP ship since the ship is not persistently excited under DP. In addition the ship parameter estimation problem is nonlinear and multivariable with only position and thruster state measurements available for parameter estimation. The process and measurement noise must also be modeled in order to avoid parameter drift due to environmental disturbances and sensor failure. This article discusses an off-line parallel extended Kalman filter (EKF algorithm utilizing two measurement series in parallel to estimate the parameters in the DP ship model. Full-scale experiments with a supply vessel are used to demonstrate the convergence and robustness of the proposed parameter estimator.

IMPLEMENTATION APPROACHES DURING SIMULATION OF ENERGY PROCESSES FOR A DYNAMICALLY POSITIONED SHIP

Directory of Open Access Journals (Sweden)

V.V. Budashko

2015-12-01

Full Text Available Purpose. Creation of a mathematical model of the ship's power plant (SPP combined propulsion complexes (CPC that takes into account the behavior of all objects, including the ship itself, the transfer of power from the medium speed diesel generators on the propellers, which will allow to take into account the hydrodynamic properties of the vessel and their impact on the energy processes in SPP CPC. Methodology. The analysis of energy processes in the SPP CPC in different operating conditions resulted in creation of a strategy for constructing mathematical models of SPP CPC. This strategy is based on the implementation on the vector plane resulting power characteristics of SPP vectors disturbances, leading to the deviation of the hydrodynamic characteristics of the ship during operation dynamic positioning. The result allowed to consider not only the features of setting PID-governors of frequency converters of electric thrusters but the automatic voltage regulators of medium speed diesel generators as well. Results. Within the research work a software package Ships_CPC in MatLab/Simulink was developed under the state budget project «Concepts, technologies and ways of improving ship power plants combined propulsion complexes» at the Department of Electromechanics and Electrical Engineering of Odessa National Maritime Academy. Originality. This complex represents a set of functional blocks of the components SPP CPC, built on the principle of «input-output». The simulation results demonstrate the ability to use software package Ships_CPC to study the effect of various settings on the energy regulators of processes SPP CPC, which can develop and integrate the different strategies of automatic voltage regulators. Practical value. Since software complex Ships_CPC was developed under Open system technology, it can reorganize, re-tune and integrate in processes of any difficulties with further completion in the form of a universal structure.

A Parasitic Array Receiver for ISAR Imaging of Ship Targets Using a Coastal Radar

Directory of Open Access Journals (Sweden)

Fabrizio Santi

2016-01-01

Full Text Available The detection and identification of ship targets navigating in coastal areas are essential in order to prevent maritime accidents and to take countermeasures against illegal activities. Usually, coastal radar systems are employed for the detection of vessels, whereas noncooperative ship targets as well as ships not equipped with AIS transponders can be identified by means of dedicated active radar imaging system by means of ISAR processing. In this work, we define a parasitic array receiver for ISAR imaging purposes based on the signal transmitted by an opportunistic coastal radar over its successive scans. In order to obtain the proper cross-range resolution, the physical aperture provided by the array is combined with the synthetic aperture provided by the target motion. By properly designing the array of passive devices, the system is able to correctly observe the signal reflected from the ships over successive scans of the coastal radar. Specifically, the upper bounded interelement spacing provides a correct angular sampling accordingly to the Nyquist theorem and the lower bounded number of elements of the array ensures the continuity of the observation during multiple scans. An ad hoc focusing technique has been then proposed to provide the ISAR images of the ships. Simulated analysis proved the effectiveness of the proposed system to provide top-view images of ship targets suitable for ATR procedures.

46 CFR 167.05-25 - Nautical school ship.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Nautical school ship. 167.05-25 Section 167.05-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Definitions § 167.05-25 Nautical school ship. The term nautical school ship means a vessel operated by or in connection with a nautical school...

Liner Shipping Fleet Repositioning

DEFF Research Database (Denmark)

Tierney, Kevin; Jensen, Rune Møller

2011-01-01

Liner shipping fleet repositioning consists of moving vessels between services in a liner ship- ping network in order to better orient the overall network to the world economy, and to ensure the proper maintenance of vessels. Thus, fleet repositioning involves sailing and loading activities subject...

Hydrodynamics of Ship Propellers

DEFF Research Database (Denmark)

Breslin, John P.; Andersen, Poul

This book deals with flows over propellers operating behind ships, and the hydrodynamic forces and moments which the propeller generates on the shaft and on the ship hull.The first part of the text is devoted to fundamentals of the flow about hydrofoil sections (with and without cavitation...... of an intermittently cavitating propeller in a wake and the pressures and forces it exerts on the shaft and on the ship hull is examined. A final chapter discusses the optimization of efficiency of compound propulsors. The authors have taken care to clearly describe physical concepts and mathematical steps. Appendices...

International climate policy : consequences for shipping

OpenAIRE

Mæstad, Ottar; Evensen, Annika Jaersen; Mathiesen, Lars; Olsen, Kristian

2000-01-01

This report summarises the main results from the project Norwegian and international climate policy consequences for shipping. The aim of the project has been to shed light on how climate policies might affect shipping, both from the cost side and from the demand side. The project has been divided into three sub-projects, investigating the consequences of climate policies for 1. Optimal shipping operations and management 2. The competitiveness of shipping relative to land transport 3. The tra...

Computational methods for more fuel-efficient ship

NARCIS (Netherlands)

Koren, B.

2008-01-01

The flow of water around a ship powered by a combustion engine is a key factor in the ship's fuel consumption. The simulation of flow patterns around ship hulls is therefore an important aspect of ship design. While lengthy computations are required for such simulations, research by Jeroen Wackers

48 CFR 1371.118 - Changes-ship repair.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Changes-ship repair. 1371.118 Section 1371.118 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE DEPARTMENT SUPPLEMENTAL REGULATIONS ACQUISITIONS INVOLVING SHIP CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.118 Changes—ship repair. Insert clause...

Total Analysis System for Ship Structural Strength

OpenAIRE

Takuya, Yoneya; Hiroyuki, Kobayashi; Abdul M., Rahim; Yoshimichi, Sasaki; Masaki, Irisawa; Technical Investigation and Information Department, Research Center; Technical Investigation and Information Department, Research Center; Singapore Office; Technical Investigation and Information Department, Research Center; Technical Investigation and Information Department, Research Center

2001-01-01

This paper outlines a total analysis system for ship hull structures, which integrates a wide variety of analysis functions to realise practical applications of rational methods for assessing ship structural strength. It is based on direct calculation of wave-induced loads as well as three-dimensional structural analysis of an entire-ship or hold structure. Three major analysis functions of the total system are ship motion and wave load analysis, ship structural analysis and statistical analy...

The Transformation of Swedish Shipping, 1970-2010

OpenAIRE

Sjögren, Hans; Taro Lennerfors, Thomas; Taudal Poulsen, Rene

2012-01-01

Since the early 1970s, as shipping has undergone a period of structural change, Swedish shipping has rapidly declined from a position of global importance. The Swedish-controlled fleet has dwindled, and the structure of the industry itself has changed. This article explores the influence of shipping markets, shipping regulations, company strategies, maritime know-how, and financial resources on the development of Swedish shipping from 1970 to 2010. A comparison is made between, on the one han...

Blockchain technology and its impact on financial and shipping services

Directory of Open Access Journals (Sweden)

Viktor Diordiiev

2018-03-01

Full Text Available Introduction. Blockchain technology is becoming one of the main drivers of innovation in the global economy. Its adoption will have a huge impact on how businesses and governments operate and on the way people organize their everyday lives. Financial services industry is the one experiencing the biggest impact of the blockchain disruption so far, while financial institutions are among the first adopters of the technology. At the same time, being a relatively traditional industry, shipping has not yet seen many use cases with blockchain, but the technology is able to change this industry dramatically. Aim and tasks. As the industries of finance and shipping have huge potential in the blockchain space and often interact, determining how the blockchain technology adoption can influence the industries of finance and shipping in the future was the main purpose of this article. Research results. To fulfill this purpose, it was important to describe the origins of the blockchain technology, its main characteristics, functioning principles and consensus algorithms. Supported by the recent hype, cryptocurrencies are the biggest use case for blockchain so far, therefore, the article analyzes the largest of them, including Bitcoin, Ethereum and some others, as well as the cryptocurrency market as a whole. The level of worldwide adoption of blockchain and the overall market size are defined further in the article. Various applications in finance are also mentioned, paying particular attention to the insurance industry. Based on this information, the key areas in which blockchain can disrupt finance and insurance are identified. As the number of blockchain companies increases rapidly, the two main fundraising channels for such companies, venture capital and initial coin offering, are analyzed and compared. The ways in which blockchain may impact the shipping services industry are identified further. Conclusion. Afterwards, the article describes a number of

Effective and Safe Ships

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Amdahl, Jørgen; Rutgersson, Olle

1996-01-01

A Joint Nordic Research project "Effecive and Safe Ships" is presented. The project is aiming to develop methods and tools for quantitative evaluation fo ship safety. This report is the report of the preliminary phase where the plan for the main project is developed. The objectives of the project...

Analysis of ship life cycles: the impact of economic cycles and ship inspection

NARCIS (Netherlands)

Bijwaard, G.E.; Knapp, S.

2009-01-01

Due to the shipping industry's international legal framework, there are loopholes in the system, which can increase the risk of incidents with high economic costs due to the substandard operation of vessels. This article uses duration analysis and through the creation of ship life cycles provides

Quality assurance program description for shipping packages of radioactive material

International Nuclear Information System (INIS)

1978-01-01

This quality assurance plan describes the quality assurance program at the Pacific Northwest Laboratory (PNL), for shipping packages of radioactive material. The purpose of this report is to describe how PNL will comply with the Code of Federal Regulations, Title 10, Part 71, Appendix E. In compliance with the instructions from the Nuclear Regulatory Commission (NRC), the 18 criteria from Appendix E are covered

Special-Purpose High-Torque Permanent-Magnet Motors

Science.gov (United States)

Doane, George B., III

1995-01-01

Permanent-magnet brushless motors that must provide high commanded torques and satisfy unusual heat-removal requirement are developed. Intended for use as thrust-vector-control actuators in large rocket engines. Techniques and concepts used to design improved motors for special terrestrial applications. Conceptual motor design calls for use of rotor containing latest high-energy-product rare-earth permanent magnets so that motor produces required torque while drawing smallest possible currents from power supply. Torque generated by electromagnetic interaction between stator and permanent magnets in rotor when associated electronic circuits applied appropriately temporally and spatially phased currents to stator windings. Phase relationships needed to produce commanded torque computed in response to torque command and to electronically sensed angular position of rotor relative to stator.

Simple analytical relations for ship bow waves

Science.gov (United States)

Noblesse, Francis; Delhommeau, G.?Rard; Guilbaud, Michel; Hendrix, Dane; Yang, Chi

Simple analytical relations for the bow wave generated by a ship in steady motion are given. Specifically, simple expressions that define the height of a ship bow wave, the distance between the ship stem and the crest of the bow wave, the rise of water at the stem, and the bow wave profile, explicitly and without calculations, in terms of the ship speed, draught, and waterline entrance angle, are given. Another result is a simple criterion that predicts, also directly and without calculations, when a ship in steady motion cannot generate a steady bow wave. This unsteady-flow criterion predicts that a ship with a sufficiently fine waterline, specifically with waterline entrance angle 2, may generate a steady bow wave at any speed. However, a ship with a fuller waterline (25E) can only generate a steady bow wave if the ship speed is higher than a critical speed, defined in terms of αE by a simple relation. No alternative criterion for predicting when a ship in steady motion does not generate a steady bow wave appears to exist. A simple expression for the height of an unsteady ship bow wave is also given. In spite of their remarkable simplicity, the relations for ship bow waves obtained in the study (using only rudimentary physical and mathematical considerations) are consistent with experimental measurements for a number of hull forms having non-bulbous wedge-shaped bows with small flare angle, and with the authors' measurements and observations for a rectangular flat plate towed at a yaw angle.

7 CFR 923.54 - Special purpose shipments.

Science.gov (United States)

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... conduct of marketing research and development projects established pursuant to § 923.45. (c) The committee... channels of trade for other than the specific purposes authorized by this section. Such rules, regulations...

Potential aerosol generation mechanisms from damaged shipping packages

International Nuclear Information System (INIS)

Mishima, J.

1976-07-01

Estimates of the potential airborne release of radioactive materials in transportation accidents are necessary to compare the safety in various shipping methods. To make such estimates, information is required on various aspects of the accident situation (physical and chemical characteristics of the source materials, forces/conditions imposed upon the source material by the accident, etc.). Published data which may be useful in estimating the fractional airborne release of radionuclides are discussed. Special emphasis is given to experimental data generated under conditions similar to those found under accident conditions. Estimates of the fractional airborne release of a liquid and a powder for particular accident scenarios are discussed to illustrate the application of the data

Ship emissions and air pollution in Denmark

DEFF Research Database (Denmark)

Olesen, Helge Rørdam; Winther, Morten; Ellermann, Thomas

A project has been carried out to map the contribution from ship traffic to air pollution in Denmark. A main element in the project is the establishment of a new, improved inventory of ship emissions for the waters around Denmark. The inventory makes use of the so-called AIS system, which...... continuously keeps track of ship positions. The inventory provides basis for model calculations of air quality in Denmark for the years 2007, 2011 and 2020. The study has focus on identifying the contribution from ships, and on assessing the effect of international regulations of ship pollution. A minor...... component of the study concerns the contribution to local air pollution from ships at port....

Influences of the separation distance, ship speed and channel dimension on ship maneuverability in a confined waterway

Science.gov (United States)

Du, Peng; Ouahsine, Abdellatif; Sergent, Philippe

2018-05-01

Ship maneuvering in the confined inland waterway is investigated using the system-based method, where a nonlinear transient hydrodynamic model is adopted and confinement models are implemented to account for the influence of the channel bank and bottom. The maneuvering model is validated using the turning circle test, and the confinement model is validated using the experimental data. The separation distance, ship speed, and channel width are then varied to investigate their influences on ship maneuverability. With smaller separation distances and higher speeds near the bank, the ship's trajectory deviates more from the original course and the bow is repelled with a larger yaw angle, which increase the difficulty of maneuvering. Smaller channel widths induce higher advancing resistances on the ship. The minimum distance to the bank are extracted and studied. It is suggested to navigate the ship in the middle of the channel and with a reasonable speed in the restricted waterway.

27 CFR 44.187 - Shipping containers.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Shipping containers. 44... Shipping containers. Each shipping case, crate, or other container in which tobacco products, or cigarette... same containers in which they were received from the factory. (72 Stat. 1418, as amended; 26 U.S.C...

27 CFR 44.254 - Shipping containers.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Shipping containers. 44.254 Section 44.254 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Requirements § 44.254 Shipping containers. Each shipping case, crate, or other container, in which cigars are...

49 CFR 176.24 - Shipping papers.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Shipping papers. 176.24 Section 176.24... Requirements § 176.24 Shipping papers. (a) A person may not accept a hazardous material for transportation or transport a hazardous material by vessel unless that person has received a shipping paper prepared in...

49 CFR 177.817 - Shipping papers.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Shipping papers. 177.817 Section 177.817... Information and Regulations § 177.817 Shipping papers. (a) General requirements. A person may not accept a... received a shipping paper prepared in accordance with part 172 of this subchapter or the material is...

49 CFR 174.24 - Shipping papers.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Shipping papers. 174.24 Section 174.24... Requirements § 174.24 Shipping papers. (a) A person may not accept a hazardous material for transportation or transport a hazardous material by rail unless that person receives a shipping paper prepared in accordance...

When a shipping company creates transparency, empowerment and engagement through social media

DEFF Research Database (Denmark)

Agerdal-Hjermind, Annette

2014-01-01

The purpose of this chapter is to show and discuss how corporate social media usage is driven by people, not technology, and how the creation of a culture of participation on the part of a company, in this case the world’s largest container shipping company with 25,000 employees worldwide, Maersk...

Development of nuclear powered ship in Japan

International Nuclear Information System (INIS)

Sato, Hiroshi

1976-01-01

The development of nuclear merchant ship in Japan was started in 1955 by the establishment of Nuclear Ship Study Group, and since then, the investigation, test and research on nuclear ships have been continued. As a result, a nuclear ocean observation and supply ship was designed for trial. Researches were carried out also in JAERI and Institute for Technical Research of Ships. Meanwhile, the nuclear icebreaker Lenin was completed in Soviet Union in 1959, the nuclear ship Savannah set out for maiden voyage in U.S. in 1962, and the construction of the nuclear ore carrier Otto Hahn was prepared in FRG. Japan Nuclear Ship Development Corp. was established in 1963, and started the design and construction of the first nuclear ship in Japan, Mutsu. The basic policy in the construction is the improvement of nuclear ship technology, the securing of safety, and the use of domestic technologies as far as possible. The progress of the design, construction and test of the Mutsu is described. Owing to the problem of radiation leak, the development of nuclear ships stagnated for a while, but the nuclear plant of the Mutsu demonstrated the expected performance in the functional test, land criticality test and zero output test, and it is expected that the bud of the independent development brought up so far can bear valuable fruit. The independent development of marine nuclear reactors should be continued by selecting the way most suitable to Japan. (Kako, I.)

Ship emissions and their externalities for Greece

Science.gov (United States)

Tzannatos, Ernestos

2010-06-01

The existing and emerging international and European policy framework for the reduction of ship exhaust emissions dictates the need to produce reliable national, regional and global inventories in order to monitor emission trends and consequently provide the necessary support for future policy making. Furthermore, the inventories of ship exhaust emissions constitute the basis upon which their external costs are estimated in an attempt to highlight the economic burden they impose upon the society and facilitate the cost-benefit analysis of the proposed emission abatement technologies, operational measures and market-based instruments prior to their implementation. The case of Greece is of particular interest mainly because the dense ship traffic within the Greek seas directly imposes the impact of its exhaust emission pollutants (NO x, SO 2 and PM) upon the highly populated, physically sensitive and culturally precious Greek coastline, as well as upon the land and seas of Greece in general, whereas the contribution of Greece in the global CO 2 inventory at a time of climatic change awareness cannot be ignored. In this context, this paper presents the contribution of Greece in ship exhaust emissions of CO 2, NO x, SO 2 and PM from domestic and international shipping over the last 25 years (1984-2008), utilizing the fuel-based (fuel sales) emission methodology. Furthermore, the ship exhaust emissions generated within the Greek seas and their externalities are estimated for the year 2008, through utilizing the fuel-based (fuel sales) approach for domestic shipping and the activity-based (ship traffic) approach for international shipping. On this basis, it was found that during the 1984 to 2008 period the fuel-based (fuel sales) ship emission inventory for Greece increased at an average annual rate of 2.85%. In 2008, the CO 2, NO x, SO 2 and PM emissions reached 12.9 million tons (of which 12.4 million tons of CO 2) and their externalities were found to be around 3

Report of Nuclear Powered Ship Meeting

International Nuclear Information System (INIS)

1984-01-01

The development of nuclear-powered ships in Japan broke down due to the radiation leak on the nuclear ship ''Mutsu'' in 1974, and the objective has not yet been attained. The Japan Nuclear Ship Research and Development Agency was reorganized to advance the development of nuclear-powered ships and to develop marine nuclear reactors. Recently, various opinions have been expressed regarding the development of nuclear-powered ships and Mutsu, accordingly, it is necessary to clarify the way it should be. The Atomic Energy Commission organized this meeting to discuss the problem. The practical use of nuclear-powered ships is expected at the beginning of the 21st century, but it is only the guess. But it is important to accumulate the technology, knowledge and experience to prepare for the use of nuclear-powered ships. The continuation of the development of Mutsu is important for the future, and the construction of the new home port is unavoidable. The aim of the research and development, and the concrete way of advancing the research and development of Mutsu are discussed. It is scheduled that the Agency is integrated with other atomic energy organizations by March, 1985. The consideration to be given for implementing the integration is described. (Kako, I.)

19 CFR 4.69 - Shipping articles.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Shipping articles. 4.69 Section 4.69 Customs... VESSELS IN FOREIGN AND DOMESTIC TRADES Foreign Clearances § 4.69 Shipping articles. No vessel of the U.S... officer, of the shipping articles agreements, including any seaman's allotment agreement, required by 46 U...

29 CFR 1915.162 - Ship's boilers.

Science.gov (United States)

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Ship's boilers. 1915.162 Section 1915.162 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Ship's Machinery and Piping Systems § 1915.162 Ship's boilers. (a) Before...

76 FR 19380 - Notice of Entry Into Effect of MARPOL Annex V Wider Caribbean Region Special Area

Science.gov (United States)

2011-04-07

... Effect of MARPOL Annex V Wider Caribbean Region Special Area AGENCY: Coast Guard, DHS. ACTION: Notice. SUMMARY: The Coast Guard announces the date for the entry into effect of discharge requirements from ships in the Wider Caribbean Region (WCR) special area (SA) as specified in the International Convention...

Added masses of ship structures

CERN Document Server

Korotkin, Alexandr I

2008-01-01

This essentially self-contained reference book contains data on added masses of ships and various ship and marine engineering structures. Theoretical and experimental methods for determining added masses of these objects are described.

Control mechanisms for Nordic ship emissions

Energy Technology Data Exchange (ETDEWEB)

Martinsen, K. [DNV, Oslo (Norway); Torvanger, A. [Cicero, Oslo (Norway)

2013-04-15

Shipping today operates under a complex set of international and domestic regulations. However, the environmental regulations have lagged behind those of other industries. This situation is now changing quite dramatically. The increased focus on environmental issues, combined with the growing realisation of the actual pollution burden imposed by shipping, has led to an upsurge in both international and national regulations. Some are ready and will enter into force in the near future, while others are still being developed. On behalf of the Nordic Council of Ministers DNV has carried out a study on possible control mechanisms for Nordic ship emission. The aim is to assess the baseline shipping emissions and reduction potential and the possible controlling mechanisms (both incentives and regulations) available for reducing the emissions to air from shipping within the Nordic region. (Author)

Spent fuel shipping cask sealing concepts

International Nuclear Information System (INIS)

Sonnier, C.S.

1989-05-01

In late 1985, the International Atomic Energy Agency (IAEA) requested the US Program for Technical Assistance to IAEA Safeguards (POTAS) to provide a study which examined sealing concepts for application to spent fuel shipping casks. This request was approved, and assigned to Sandia National Laboratories (Sandia). In the course of this study, discussions were held with personnel in the International Safeguards Community who were familiar with the shipping casks used in their States. A number of shipping casks were examined, and discussions were held with two shipping cask manufacturers in the US. As a result of these efforts, it was concluded that the shipping casks provided an extremely good containment, and that many of the existing casks can be effectively sealed by applying the seal to the cask closure bolts/nuts

Design and modelling of innovative machinery systems for large ships

DEFF Research Database (Denmark)

Larsen, Ulrik

Eighty percent of the growing global merchandise trade is transported by sea. The shipping industry is required to reduce the pollution and increase the energy efficiency of ships in the near future. There is a relatively large potential for approaching these requirements by implementing waste heat...... consisting of a two-zone combustion and NOx emission model, a double Wiebe heat release model, the Redlich-Kwong equation of state and the Woschni heat loss correlation. A novel methodology is presented and used to determine the optimum organic Rankine cycle process layout, working fluid and process......, are evaluated with regards to the fuel consumption and NOx emissions trade-off. The results of the calibration and validation of the engine model suggest that the main performance parameters can be predicted with adequate accuracies for the overall purpose. The results of the ORC and the Kalina cycle...

Development of a nuclear ship safety philosophy

International Nuclear Information System (INIS)

Thompson, T.E.

1978-01-01

A unique safety philosophy must be recognized and accepted as an integral part of the design and operation of a nuclear ship. For the nuclear powered ship, the ultimate safety of the reactor and therefore the crew and the environment lies with the safety of the ship itself. The basis for ship safety is its ability to navigate and survive the conditions or the environment in which it may find itself. The subject of traditional ship safety is examined along with its implication for reactor protection and safety. Concepts of reactor safety are also examined. These two philosophies are combined in a manner so as to provide a sound philosophy for the safety of nuclear ships, their crews, and the environment

Conditions of the environment and female entrepreneur ship. A quantitative study in Spain; Condicionantes del entorno y emprendimiento femenino. Un estudio cuantitativo en Espana

Energy Technology Data Exchange (ETDEWEB)

Alvarez, C.; Noguera, M.; Urbano, D.

2012-11-01

The main purpose of this research is to analyze the influence of the environmental factors on female entrepreneurial activity, using the institutional approach as the theoretical framework. The empirical research uses regression logistic models and data from Global Entrepreneur ship Monitor (GEM). The main findings indicate that informal factors (perception of abilities to entrepreneur ship, social networks and family role) are more relevant for female entrepreneur ship than formal factors (financing, support policies to entrepreneur ship and education). The research contributes both theoretically, with the advances in the field of women entrepreneur ship and practically, for the design of support policies to female entrepreneurial activity. (Author) 74 refs.

15 CFR 750.11 - Shipping tolerances.

Science.gov (United States)

2010-01-01

... in the ECCN applicable to your item reads “ $ value” or “in $ value”, there is no shipping tolerance... is no shipping tolerance with respect to the number of units. However, the value of all of your... shipping tolerance on this license because the items are controlled by an ECCN where “$ value” is the...

Ship design methodologies of preliminary design

CERN Document Server

Papanikolaou, Apostolos

2014-01-01

This book deals with ship design and in particular with methodologies of the preliminary design of ships. The book is complemented by a basic bibliography and five appendices with useful updated charts for the selection of the main dimensions and other basic characteristics of different types of ships (Appendix A), the determination of hull form  from the data of systematic hull form series (Appendix B), the detailed description of the relational method for the preliminary estimation of ship weights (Appendix C), a brief review of the historical evolution of shipbuilding science and technology from the prehistoric era to date (Appendix D) and finally a historical review of regulatory developments of ship's damage stability to date (Appendix E).  The book can be used as textbook for ship design courses or as additional reading for university or college students of naval architecture courses and related disciplines; it may also serve as a reference book for naval architects, practicing engineers of rel...

Potential risks of nuclear ships

International Nuclear Information System (INIS)

Oelgaard, P.L.

1994-07-01

This report represents an attempt to evaluate the potential risks of nuclear ships. Firstly reasons are given why nuclear ship accidents will not lead to accidents of the magnitude of the Chernobyl accident. This is due to much lower content of radioactive material and to different reactor designs. Next a review is given of the types of accidents which have actually occurred. Of these the reactor accidents which may lead to serious consequences for the crew and the environment are considered further. These are reactivity accidents and loss of coolant accidents. In addition the long term risks of sunken nuclear ships and sea disposed reactor compartments etc. are also discussed. Based on available accident data an attempt is made to estimate the probability of serious nuclear ship accidents. (au)

Occupational accidents aboard merchant ships

DEFF Research Database (Denmark)

Hansen, H.L.; Nielsen, D.; Frydenberg, Morten

2002-01-01

Objectives: To investigate the frequency, circumstances, and causes of occupational accidents aboard merchant ships in international trade, and to identify risk factors for the occurrence of occupational accidents as well as dangerous working situations where possible preventive measures may...... be initiated. Methods: The study is a historical follow up on occupational accidents among crew aboard Danish merchant ships in the period 1993–7. Data were extracted from the Danish Maritime Authority and insurance data. Exact data on time at risk were available. Results: A total of 1993 accidents were...... aboard. Relative risks for notified accidents and accidents causing permanent disability of 5% or more were calculated in a multivariate analysis including ship type, occupation, age, time on board, change of ship since last employment period, and nationality. Foreigners had a considerably lower recorded...

Concept Design and Risk Assessment of Nuclear Propulsion Ship

International Nuclear Information System (INIS)

Gil, Youngmi; Yoo, Seongjin; Kim, Yeontae; Oh, June; Byun, Yoonchul; Woo, Ilguk; Kim, Jiho; Choi, Suhn

2014-01-01

The nuclear propulsion ships (hereinafter referred to as 'nuclear ships') have been considered as an eco-friendly ship. There have historically been warship and submarine with the source of nuclear power. The use of nuclear ships has been recently extending to the icebreaker, the deep-water exploration ship, and the floating nuclear power plant. Prior to developing the new ship, we evaluated the economics of various types of ships and concluded that the container ship could be appropriate for the nuclear propulsion. In order to verify its safety, we performed the ship calculation based on the optimal arrangement of the nuclear reactor. Finally, we verified its safety by the HAZID. In the former research, we confirmed the applicability of the nuclear propulsion system for the large container ship. In this study, we verified the safety of the nuclear ships according to the HAZID analysis. We expect that this research will lead to safe design of the nuclear ships

Concept Design and Risk Assessment of Nuclear Propulsion Ship

Energy Technology Data Exchange (ETDEWEB)

Gil, Youngmi; Yoo, Seongjin; Kim, Yeontae; Oh, June; Byun, Yoonchul; Woo, Ilguk [Daewoo Shipbuilding and Marine Engineering Co. Ltd., Seoul (Korea, Republic of); Kim, Jiho; Choi, Suhn [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

The nuclear propulsion ships (hereinafter referred to as 'nuclear ships') have been considered as an eco-friendly ship. There have historically been warship and submarine with the source of nuclear power. The use of nuclear ships has been recently extending to the icebreaker, the deep-water exploration ship, and the floating nuclear power plant. Prior to developing the new ship, we evaluated the economics of various types of ships and concluded that the container ship could be appropriate for the nuclear propulsion. In order to verify its safety, we performed the ship calculation based on the optimal arrangement of the nuclear reactor. Finally, we verified its safety by the HAZID. In the former research, we confirmed the applicability of the nuclear propulsion system for the large container ship. In this study, we verified the safety of the nuclear ships according to the HAZID analysis. We expect that this research will lead to safe design of the nuclear ships.

Automatic temperature control method of shipping can

International Nuclear Information System (INIS)

Nishikawa, Kaoru.

1992-01-01

The present invention provides a method of rapidly and accurately controlling the temperature of a shipping can, which is used upon shipping inspection for a nuclear fuel assembly. That is, a measured temperature value of the shipping can is converted to a gas pressure setting value in a jacket of the shipping can by conducting a predetermined logic calculation by using a fuzzy logic. A gas pressure control section compares the pressure setting value of a fuzzy estimation section and the measured value of the gas pressure in the jacket of the shipping can, and conducts air supply or exhaustion of the jacket gas so as to adjust the measured value with the setting value. These fuzzy estimation section and gas pressure control section control the gas pressure in the jacket of the shipping can to control the water level in the jacket. As a result, the temperature of the shipping can is controlled. With such procedures, since the water level in the jacket can be controlled directly and finely, temperature of the shipping can is automatically controlled rapidly and accurately compared with a conventional case. (I.S.)

Ship Observations - VOS and Navy

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Combination of Voluntary Observing Ship (VOS) and US Navy Ship weather observations. Obs generally taken 2-4 times daily at 00, 06, 12, and 18z.

Shipping Fairways

Data.gov (United States)

Department of Homeland Security — Various shipping zones delineate activities and regulations for marine vessel traffic. Traffic lanes define specific traffic flow, while traffic separation zones...

System Architecture for Anti-Ship Ballistic Missile Defense (ASBMD)

OpenAIRE

Hobgood, Jean; Madison, Kimberly; Pawlowski, Geoffrey; Nedd, Steven; Roberts, Michael; Rumberg, Paige

2009-01-01

Approved for public release; distribution is unlimited. Recent studies suggest that China is developing a new class of ballistic missiles that can be used against moving targets, such as ships. One such technology is anticipated to cover a range of 2,000 kilometers and operate at a speed of Mach 10. The threat is also capable of maneuvering both during the midcourse and terminal flight phases for the purposes of guidance, target acquisition, and countermeasures. This threat could greatl...

Residual Generation for the Ship Benchmark Using Structural Approach

DEFF Research Database (Denmark)

Cocquempot, V.; Izadi-Zamanabadi, Roozbeh; Staroswiecki, M

1998-01-01

The prime objective of Fault-tolerant Control (FTC) systems is to handle faults and discrepancies using appropriate accommodation policies. The issue of obtaining information about various parameters and signals, which have to be monitored for fault detection purposes, becomes a rigorous task...... with the growing number of subsystems. The structural approach, presented in this paper, constitutes a general framework for providing information when the system becomes complex. The methodology of this approach is illustrated on the ship propulsion benchmark....

Navy Ships: Turning Over Auxiliary Ship Operations to the Military Sealift Command Could Save Millions

National Research Council Canada - National Science Library

1997-01-01

.... One additional multiproduct ship of a new class is currently under construction. The Navy has delegated operational control of 27 of these ships to MSC, the military's single manager for sealift, to better...

Update on emissions and environmental impacts from the international fleet of ships: the contribution from major ship types and ports

Directory of Open Access Journals (Sweden)

S. B. Dalsøren

2009-03-01

Full Text Available A reliable and up-to-date ship emission inventory is essential for atmospheric scientists quantifying the impact of shipping and for policy makers implementing regulations and incentives for emission reduction. The emission modelling in this study takes into account ship type and size dependent input data for 15 ship types and 7 size categories. Global port arrival and departure data for more than 32 000 merchant ships are used to establish operational profiles for the ship segments. The modelled total fuel consumption amounts to 217 Mt in 2004 of which 11 Mt is consumed in in-port operations. This is in agreement with international sales statistics. The modelled fuel consumption is applied to develop global emission inventories for CO₂, NO₂, SO₂, CO, CH₄, VOC (Volatile Organic Compounds, N₂O, BC (Black Carbon and OC (Organic Carbon. The global emissions from ships at sea and in ports are distributed geographically, applying extended geographical data sets covering about 2 million global ship observations and global port data for 32 000 ships. In addition to inventories for the world fleet, inventories are produced separately for the three dominating ship types, using ship type specific emission modelling and traffic distributions.

A global Chemical Transport Model (CTM was used to calculate the environmental impacts of the emissions. We find that ship emissions is a dominant contributor over much of the world oceans to surface concentrations of NO₂ and SO₂. The contribution is also large over some coastal zones. For surface ozone the contribution is high over the oceans but clearly also of importance over Western North America (contribution 15–25% and Western Europe (5–15%. The contribution to tropospheric column ozone is up to 5–6%. The overall impact of ship emissions on global methane lifetime is large due to the high NO_x emissions. With

Ships going slow in reducing their NOx emissions: changes in 2005-2012 ship exhaust inferred from satellite measurements over Europe

Science.gov (United States)

Folkert Boersma, K.; Vinken, Geert C. M.; Tournadre, Jean

2015-07-01

We address the lack of temporal information on ship emissions, and report on rapid short-term variations of satellite-derived ship NOx emissions between 2005 and 2012 over European seas. Our inversion is based on OMI observed tropospheric NO2 columns and GEOS-Chem simulations. Average European ship NOx emissions increased by ˜15% from 2005 to 2008. This increase was followed by a reduction of ˜12% in 2009, a direct result of the global economic downturn in 2008-2009, and steady emissions from 2009 to 2012. Observations of ship passages through the Suez Canal and satellite altimeter derived ship densities suggests that ships in the Mediterranean Sea have reduced their speed by more than 30% since 2008. This reduction in ship speed is accompanied by a persistent 45% reduction of average, per ship NOx emission factors. Our results indicate that the practice of ‘slow steaming’, i.e. the lowering of vessel speed to reduce fuel consumption, has indeed been implemented since 2008, and can be detected from space. In spite of the implementation of slow steaming, one in seven of all NOx molecules emitted in Europe in 2012 originated from the shipping sector, up from one in nine in 2005. The growing share of the shipping contributions to the overall European NOx emissions suggests a need for the shipping sector to implement additional measures to reduce pollutant emissions at rates that are achieved by the road transport and energy producing sectors in Europe.

Evaluation of the Service Performance of Ships

DEFF Research Database (Denmark)

Andersen, Poul; Borrod, Anne-Sophie; Blanchot, Hervé

2005-01-01

A simple method has been established for the evaluation of the service performance of ships. Input data are easily collected daily on board and transformed to a well-defined condition that makes possible the comparison between ships, for instance, sister ships, and between different time periods...... of voyages for the same ship. The procedure has been applied to two ships that are identical, with the exception that one has a conventional propeller, whereas the other one is fitted with a high-efficiency propeller of the KAPPEL type. The results are obtained from a period of 2 years steaming for both...

Transnucleaire's experience in ship adaptation

International Nuclear Information System (INIS)

Brachet, Y.; Vallette-Fontaine, M.

2000-01-01

Due to the application of the new IMDG regulations for the transport of radioactive material by sea, the conditions of transport of MTR spent fuel have drastically changed five years ago. In this paper, TRANSNUCLEAIRE analyses the necessary modifications to apply to existing ships in order to comply with the IMDG/INF regulations as well as with the Japanese KAISA 520 regulation. In the MTR spent fuel transport market characterized by a competitive approach, TRANSNUCLEAIRE has carried out many transports by sea in full compliance with the regulations at a price which is as close as possible to that of other industrial goods and without the need to fully dedicate the BOUGUENAIS ship to nuclear transports. Innovative ship design solutions have been implemented and accepted by different Authorities uncluding the Advisory Committee of the Japanese MOT. Due to efficient finite element calculations, benchmarked by laboratory large scale tests, high performances crushing materials have been developed in order to absorb the energy of collision between ships. These developments have led ta propose an efficient ship design complying with all the existing worldwide nuclear regulations. (author)

Some questions of using the algebraic coding theory for construction of special-purpose processors in high energy physics spectrometers

International Nuclear Information System (INIS)

Nikityuk, N.M.

1989-01-01

The results of investigations of using the algebraic coding theory for the creation of parallel encoders, majority coincidence schemes and coordinate processors for the first and second trigger levels are described. Concrete examples of calculation and structure of special-purpose processor using the table arithmetic method are given for multiplicity t ≤ 5. The question of using parallel and sequential syndrome coding methods for the registration of events with clusters is discussed. 30 refs.; 10 figs

The Effect of Hull Biofouling on Parameters Characterising Ship Propulsion System Efficiency

Directory of Open Access Journals (Sweden)

Tarełko Wiesła

2015-01-01

Full Text Available One of most important issues concerning technical objects is the increase of their operating performance. For a ship this performance mainly depends on the efficiency of its main pro-pulsion system and the resistance generated during its motion on water. The overall ship re-sistance, in turn, mainly depends on the hull friction resistance, closely related with the pres-ence of different types of roughness on the hull surface, including underwater part biofouling. The article analyses the effect of hull biofouling on selected parameters characterising the efficiency of the ship propulsion system with adjustable propeller. For this purpose a two-year research experiment was performed on a sailing vessel during its motor navigation phases. Based on the obtained results, three groups of characteristics were worked out for different combinations of engine rotational speed and adjustable propeller pitch settings. The obtained results have revealed that the phenomenon of underwater hull biofouling affects remarkably the parameters characterising propulsion system efficiency. In particular, the development of the biofouling layer leads to significant reduction of the speed of navigation.

Ship-to-Ship Radiocommunication Trial by Using Wireless LAN

Directory of Open Access Journals (Sweden)

Yasuyuki Niwa

2015-12-01

In a former field radiocommunication trial, omni-directional antennas were used and a few hundred kbps throughput between two ships was measured, which was not enough for our research target (over 1Mbps. In order to get faster throughput, a field radiocommunication trial was carried out again with a few types of directional antennas and RSSI (Received Signal Strength Indication and the throughput between two ships was measured simultaneously. As a result, multi-path (2-path model affected by the reflection of the sea surface was confirmed and also the characteristics of the directional antennas such as half-power angle were confirmed, but the measured throughput was fast enough to meet our expectation.

7 CFR 215.1 - General purpose and scope.

Science.gov (United States)

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 215.1 Section 215.1... AGRICULTURE CHILD NUTRITION PROGRAMS SPECIAL MILK PROGRAM FOR CHILDREN § 215.1 General purpose and scope. This part announces the policies and prescribes the general regulations with respect to the Special Milk...

An Amphibious Ship-To-Shore Simulation for Use on an IBM PC (Personal Computer)

Science.gov (United States)

1984-09-01

CA : «< <- j Special ■ *- amphibious ship- an IBM Personal ion of the phy- he logic used analysis, and a DD | JAM 11 1473 COITION...research, for instance, wiL1 be geared toward a technically oriented person who is familiar with computers, programming and the associated logic. A...problem, often vaguely stated by the decision aaker , into precise and operational terms [Ref. Hz p.51]. The analysis begins with specification of the

Note from the radioprotection group's shipping service

CERN Multimedia

2006-01-01

The service for the import/export of radioactive materials reminds you that shipping requests for potentially radioactive materials must be made via the EDH request form by ticking the box 'radioactive material'. All the necessary information is given on the web site: http://cern.ch/service-rp-shipping Requests not complying with the above procedure will not be taken into account. Radioactive Shipping Service http://cern.ch/service-rp-shipping Tel. 73171 Fax: 69200

48 CFR 47.305-16 - Shipping characteristics.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Shipping characteristics... CONTRACT MANAGEMENT TRANSPORTATION Transportation in Supply Contracts 47.305-16 Shipping characteristics... shipments of agreed size. (b) Guaranteed shipping characteristics. (1) The contracting officer shall insert...

Assessment of Polarimetric SAR Interferometry for Improving Ship Classification based on Simulated Data

Directory of Open Access Journals (Sweden)

Jordi J. Mallorqui

2008-12-01

Full Text Available This paper uses a complete and realistic SAR simulation processing chain, GRECOSAR, to study the potentialities of Polarimetric SAR Interferometry (POLInSAR in the development of new classification methods for ships. Its high processing efficiency and scenario flexibility have allowed to develop exhaustive scattering studies. The results have revealed, first, vessels’ geometries can be described by specific combinations of Permanent Polarimetric Scatterers (PePS and, second, each type of vessel could be characterized by a particular spatial and polarimetric distribution of PePS. Such properties have been recently exploited to propose a new Vessel Classification Algorithm (VCA working with POLInSAR data, which, according to several simulation tests, may provide promising performance in real scenarios. Along the paper, explanation of the main steps summarizing the whole research activity carried out with ships and GRECOSAR are provided as well as examples of the main results and VCA validation tests. Special attention will be devoted to the new improvements achieved, which are related to simulations processing a new and highly realistic sea surface model. The paper will show that, for POLInSAR data with fine resolution, VCA can help to classify ships with notable robustness under diverse and adverse observation conditions.

Feasibility Study and Cost Benefit Analysis of Thin-Client Computer System Implementation Onboard United States Navy Ships

National Research Council Canada - National Science Library

Arbulu, Timothy D; Vosberg, Brian J

2007-01-01

The purpose of this MBA project was to conduct a feasibility study and a cost benefit analysis of using thin-client computer systems instead of traditional networks onboard United States Navy ships...

Ships - inspiring objects in architecture

Science.gov (United States)

Marczak, Elzbieta

2017-10-01

Sea-going vessels have for centuries fascinated people, not only those who happen to work at sea, but first and foremost, those who have never set foot aboard a ship. The environment in which ships operate is reminiscent of freedom and countless adventures, but also of hard and interesting maritime working life. The famous words of Pompey: “Navigare necesseest, vivere non estnecesse” (sailing is necessary, living - is not necessary), which he pronounced on a stormy sea voyage, arouse curiosity and excitement, inviting one to test the truth of this saying personally. It is often the case, however, that sea-faring remains within the realm of dreams, while the fascination with ships demonstrates itself through a transposition of naval features onto land constructions. In such cases, ship-inspired motifs bring alive dreams and yearnings as well as reflect tastes. Tourism is one of the indicators of people’s standard of living and a measure of a society’s civilisation. Maritime tourism has been developing rapidly in recent decades. A sea cruise offers an insight into life at sea. Still, most people derive their knowledge of passenger vessels and their furnishings from the mass media. Passenger vessels, also known as “floating cities,” are described as majestic and grand, while their on-board facilities as luxurious, comfortable, exclusive and inaccessible to common people on land. Freight vessels, on the other hand, are described as enormous objects which dwarf the human being into insignificance. This article presents the results of research intended to answer the following questions: what makes ships a source of inspiration for land architecture? To what extent and by what means do architects draw on ships in their design work? In what places can we find structures inspired by ships? What ships inspire architects? This article presents examples of buildings, whose design was inspired by the architecture and structural details of sea vessels. An analysis of

SHIPPING REQUESTS ON EDH

CERN Multimedia

Logistics Group

2001-01-01

Users are informed that as from 1 September 2001 all Shipping Requests must be made on EDH using the appropriate electronic form. The submission of user requests directly into EDH will help rationalise the activities of the Shipping Service (Import & Export), with requests being automatically forwarded to hierarchical supervisors thereby improving the processing speed and facilitating the follow-up. Thank you for your collaboration.

A building cost estimation method for inland ships

NARCIS (Netherlands)

Hekkenberg, R.G.

2014-01-01

There is very little publicly available data about the building cost of inland ships, especially for ships that have dimensions that differ significantly from those of common ships. Also, no methods to determine the building cost of inland ships are described in literature. In this paper, a method

Design of strong wooden box coated with fiberglass reinforced resin for shipping and burial of contaminated glove boxes. Final report

International Nuclear Information System (INIS)

1982-01-01

The project scope of work included the complete decontamination and decommissioning (D and D) of the Westinghouse ARD Fuel Laboratories at the Cheswick Site in the shortest possible time. This has been accomplished in the following four phases: (1) preparation of documents and necessary paperwork; packaging and shipping of all special nuclear materials in an acceptable form to a reprocessing agency; (2) decontamination of all facilities, glove boxes and equipment; loading of generated waste into bins, barrels and strong wooden boxes; (3) shipping of al bins, barrels and boxes containing waste to the designated burial site; removal of all utility services from the laboratories; and (4) final survey of remaining facilities and certification for nonrestricted use; preparation of final report. This attachment contains design of strong wooden box coated with fiberglass reinforced resin for shipping and burial of contaminated glove boxes

Test Ship

Data.gov (United States)

Federal Laboratory Consortium — The U. S. Navy dedicated the decommissioned Spruance Class destroyer ex-PAUL F. FOSTER (EDD 964), Test Ship, primarily for at sea demonstration of short range weapon...

Application of food irradiation technology in development of future special purposed foods

Energy Technology Data Exchange (ETDEWEB)

Byun, Myung Woo; Shin, Myung Gon [Woosong University, Daejeon (Korea, Republic of); Lee, Ju Woon [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

2010-06-15

Advanced food technologies fused with radiation technology could be applied to the development of various special-purpose foods such space foods, combat rations, emergency foods, and sterile patient meals. In U.S.A, the National Aeronautics and Space Administration and the U.S. Army Natick Soldier RD and E Center co-developed the hazard analysis of critical control point, which is a essential hygienic control system in food industry. Moreover, strict manufacturing standards to produce shelf-stable foods using radiation (ionizing energy) technology were established. In Korea, the advanced food technologies to sterilize various foods using irradiation technology were expected to be applied as a hygiene process on group meals and ready-to-eat/ready-to cook foods, and to produce foods for patients with high hygienic, nutritional, and organoleptic qualities through the combination treatments with irradiation technology. And, it was considered that the advanced technology would improve the related industries and national economy by introducing the food irradiation technology to the Korean traditional fermented foods to improve their functionality. In conclusion, the advanced food technologies which are preoccupied by some developed countries like U.S.A. and Russia will make a contribution to the development of national science and technology, and competitiveness promotion of industry.

Application of food irradiation technology in development of future special purposed foods

International Nuclear Information System (INIS)

Byun, Myung Woo; Shin, Myung Gon; Lee, Ju Woon

2010-01-01

Advanced food technologies fused with radiation technology could be applied to the development of various special-purpose foods such space foods, combat rations, emergency foods, and sterile patient meals. In U.S.A, the National Aeronautics and Space Administration and the U.S. Army Natick Soldier RD and E Center co-developed the hazard analysis of critical control point, which is a essential hygienic control system in food industry. Moreover, strict manufacturing standards to produce shelf-stable foods using radiation (ionizing energy) technology were established. In Korea, the advanced food technologies to sterilize various foods using irradiation technology were expected to be applied as a hygiene process on group meals and ready-to-eat/ready-to cook foods, and to produce foods for patients with high hygienic, nutritional, and organoleptic qualities through the combination treatments with irradiation technology. And, it was considered that the advanced technology would improve the related industries and national economy by introducing the food irradiation technology to the Korean traditional fermented foods to improve their functionality. In conclusion, the advanced food technologies which are preoccupied by some developed countries like U.S.A. and Russia will make a contribution to the development of national science and technology, and competitiveness promotion of industry

The complex network of global cargo ship movements.

Science.gov (United States)

Kaluza, Pablo; Kölzsch, Andrea; Gastner, Michael T; Blasius, Bernd

2010-07-06

Transportation networks play a crucial role in human mobility, the exchange of goods and the spread of invasive species. With 90 per cent of world trade carried by sea, the global network of merchant ships provides one of the most important modes of transportation. Here, we use information about the itineraries of 16 363 cargo ships during the year 2007 to construct a network of links between ports. We show that the network has several features that set it apart from other transportation networks. In particular, most ships can be classified into three categories: bulk dry carriers, container ships and oil tankers. These three categories do not only differ in the ships' physical characteristics, but also in their mobility patterns and networks. Container ships follow regularly repeating paths whereas bulk dry carriers and oil tankers move less predictably between ports. The network of all ship movements possesses a heavy-tailed distribution for the connectivity of ports and for the loads transported on the links with systematic differences between ship types. The data analysed in this paper improve current assumptions based on gravity models of ship movements, an important step towards understanding patterns of global trade and bioinvasion.

Bio-indications of sunken ships and ship wrecks

Digital Repository Service at National Institute of Oceanography (India)

Parulekar, A

An evaluation of bottom fauna of ship-wreck sites in estuarine and coastal waters of Goa, India, revealed an exceptionally high biotic enrichment. In terms of number of species, faunal dispersion, faunal diversity, biomass and productivity, in space...

Ships and the Sailors Inside Them

National Research Council Canada - National Science Library

Sims, Philip

2004-01-01

.... Iron shipbuilding allowed safer and healthier ships but their internal compartmentation created communication problems which were gradually solved with mechanical systems Ships developed their own...

Prototypic fabrication of TRIGA irradiated fuel shipping casks

International Nuclear Information System (INIS)

Kim, B.K.; Lee, Y.W.; Whang, C.K.; Lee, J.B.

1980-01-01

This is the safety analysis report on the prototypic fabrication of ''TRIGA Irradiated Fuel Shipping Cask'' conducted by KAERI in 1980. The results of the evaluation show that the shipping cask is in compliance with the applicable regulation for the normal conditions of transport as well as hypothetical accident conditions. The prototypic fabrication of the shipping cask (type B) was carried out for the first time in Korea after getting technical experience from fabrication of the ''TRIGA Spent Fuel Shipping Cask'' and ''the KO-RI Unit 1 surveillance capsule shipping cask'' in 1979. This report contains structural evaluation, thermal evaluation, shielding, criticality, quality assurance, and handling procedures of the shipping cask

Challenges to Ship Hydrodynamics in the XXI Century

Directory of Open Access Journals (Sweden)

Lech Kobylinski

2014-09-01

Full Text Available The beginning of twenty-first century is characterized with important changes in world shipping and exploitation of ocean resources. Three important trends are clearly visible: environment protection, safety and economy. They materialize in important changes in the structure of world fleet where some existing ship types are going to disappear and new ship types emerge. Increasing the size of some ship types is another visible tendency. Stress on environment protection has serious impact on the hydrodynamic characteristics of ships whether with regard to safety zero accident rate is the goal. Important challenges to ship hydrodynamics caused by those tendencies are discussed in the paper.

Single liner shipping service design

DEFF Research Database (Denmark)

Plum, Christian Edinger Munk; Pisinger, David; Salazar-González, Juan-José

2014-01-01

The design of container shipping networks is an important logistics problem, involving assets and operational costs measured in billions of dollars. To guide the optimal deployment of the ships, a single vessel round trip is considered by minimizing operational costs and flowing the best paying...

Auxiliary facilities on nuclear ship 'MUTSU'

International Nuclear Information System (INIS)

Tsujimura, Shotaro; Takigami, Yoshio.

1989-01-01

The nuclear ship 'MUTSU' has been moored at SEKINEHAMA, MUTU City in AOMORI Prefecture and several tests and works are being carried out on the ship. The construction of the auxiliary facilities for these works on the ship was completed in safety in August 1988. After that the facilities have fulfilled their function. The outlines of design, fabrication and construction of the facilities are described in this paper. (author)

Production Balance of Ship Erection

Institute of Scientific and Technical Information of China (English)

JIANG Ru-hong; TAN Jia-hua; LIU Cun-gen

2008-01-01

A network plan model of ship erection was established based on the network planning technologyand the work-package breakdown system. The load-oriented production control method was introduced to buildup a throughput diagram model thus it is possible to describe the ship erection process numerically. Based onthe digitaiized models some cases of production balance of ship erection were studied and three balance indexeswere put forward, they are the load balance rate, the input manpower balance rate and the maximum gantrycrane operating times. Such an analytic method based on the balance evaluation is the important foundationfor digitization and intelligentization of shipyard production management.

MASTER OF THE SHIP, MANAGER AND INSTRUCTOR

Directory of Open Access Journals (Sweden)

Florin IORDANOAIA

2010-01-01

Full Text Available The master of the ship is the person on the board who has the qualification and the necessary certificate of competency for running a maritime transport ship. He is the one who takes the ship into administration from the ship-owner, he is the only leader, the legal and direct chief of the entire crew, being invested with authority upon all the members of the crew. The master fulfils the attributes and displays his activity according to the legal laws of his flag, of the marine regulations and of the international conventions. In all the relationships which he establishes with physical or juridical people, the master represents the ship-owner, in a double condition, as an officer and as a commercial manager. In this paper, it is analysed the situation of the ship masters, the relationships which these masters have with the crew and the problems which appear during their voyage. At the end of the paper there are proposed measures to increase the quality of the training of the ship masters, to solve the situations connected with the members of the crew.

Ship dynamics for maritime ISAR imaging.

Energy Technology Data Exchange (ETDEWEB)

Doerry, Armin Walter

2008-02-01

Demand is increasing for imaging ships at sea. Conventional SAR fails because the ships are usually in motion, both with a forward velocity, and other linear and angular motions that accompany sea travel. Because the target itself is moving, this becomes an Inverse- SAR, or ISAR problem. Developing useful ISAR techniques and algorithms is considerably aided by first understanding the nature and characteristics of ship motion. Consequently, a brief study of some principles of naval architecture sheds useful light on this problem. We attempt to do so here. Ship motions are analyzed for their impact on range-Doppler imaging using Inverse Synthetic Aperture Radar (ISAR). A framework for analysis is developed, and limitations of simple ISAR systems are discussed.

Communication from the Radioactive Shipping Service

CERN Multimedia

DDGS Unit

2011-01-01

The radioactive materials Import/Export service reminds you that all movements of potentially radioactive material must be declared in advance. For exports, shipping requests must be made via the EDH request form, ticking the box “radioactive material”. For imports, an electronic form must be completed before the arrival of the material. Requests which do not comply with the above procedure and any unauthorized imports of radioactive material will be refused.The same applies to imports/exports of radioactive sources. All necessary information is given in the web site: http://cern.ch/service-rp-shipping Yann Donjoux / Radioactive Shipping Service Phone: +41 22 767.31.71 Fax: +41 22 766.92.00 Email: service-rp-shipping@cern.ch

Nuclear powered freight ships - safe and reliable

International Nuclear Information System (INIS)

Schafstall, H.C.

1978-12-01

The five nuclear-powered ships built in the world so far have entered over 100 ports in 14 countries about 1000 times in 15 years, during which there were no accidents endangering the safety of a ship. However, for the expansion of freight shipping with nuclear power, comprehensive international regulations for safety requirements, responsibility etc., are necessary. Although the NEA/IAEO symposium excluded economic questions on the safety of nuclear powered ships, the trends regarding further development in individual countries became clear

Structural health monitoring for ship structures

Energy Technology Data Exchange (ETDEWEB)

Farrar, Charles [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory; Angel, Marian [Los Alamos National Laboratory; Bement, Matthew [Los Alamos National Laboratory; Salvino, Liming [NSWC, CADEROCK

2009-01-01

Currently the Office of Naval Research is supporting the development of structural health monitoring (SHM) technology for U.S. Navy ship structures. This application is particularly challenging because of the physical size of these structures, the widely varying and often extreme operational and environmental conditions associated with these ships missions, lack of data from known damage conditions, limited sensing that was not designed specifically for SHM, and the management of the vast amounts of data that can be collected during a mission. This paper will first define a statistical pattern recognition paradigm for SHM by describing the four steps of (1) Operational Evaluation, (2) Data Acquisition, (3) Feature Extraction, and (4) Statistical Classification of Features as they apply to ship structures. Note that inherent in the last three steps of this process are additional tasks of data cleansing, compression, normalization and fusion. The presentation will discuss ship structure SHM challenges in the context of applying various SHM approaches to sea trials data measured on an aluminum multi-hull high-speed ship, the HSV-2 Swift. To conclude, the paper will discuss several outstanding issues that need to be addressed before SHM can make the transition from a research topic to actual field applications on ship structures and suggest approaches for addressing these issues.

Report of Nuclear Powered Ship Council

International Nuclear Information System (INIS)

1982-01-01

From the forecast of energy balance in the world to 21st century, the diversification of energy supply and the technical development enabling it are necessary in Japan. The stable supply of marine fuel is important to maintain and develop the national life. At present, as the marine fuel substituting for petroleum, atomic energy is at the position nearest to practical use. In advanced countries, the basic technology required for the practical use of nuclear-powered merchant ships seems to have been established, but Japan is about 10 years behind them due to the delay of the Mutsu project. In order to maintain and improve the technical level of shipbuilders, the independent technology related to nuclear-powered ships must be established in Japan. In the economical examination of nuclear-powered ships, ice breakers and ice breaking tankers are advantageous, but in other types of ships, a number of conditions must be satisfied to be economical. The Mutsu must be operated to collect the data and experience, and the project of an improved marine prototype reactor must be decided. Also a demonstration ship must be built. The standards for the design, construction and operation of nuclear-powered ships and the public acceptance are necessary. (Kako, I.)

Ship exhaust gas plume cooling

NARCIS (Netherlands)

Schleijpen, H.M.A.; Neele, P.P.

2004-01-01

The exhaust gas plume is an important and sometimes dominating contributor to the infrared signature of ships. Suppression of the infrared ship signatures has been studied by TNO for the Royal Netherlands Navy over considerable time. This study deals with the suppression effects, which can be

A Study on Parametric Wave Estimation Based on Measured Ship Motions

DEFF Research Database (Denmark)

Nielsen, Ulrik Dam; Iseki, Toshio

2011-01-01

The paper studies parametric wave estimation based on the ‘wave buoy analogy’, and data and results obtained from the training ship Shioji-maru are compared with estimates of the sea states obtained from other measurements and observations. Furthermore, the estimating characteristics of the param......The paper studies parametric wave estimation based on the ‘wave buoy analogy’, and data and results obtained from the training ship Shioji-maru are compared with estimates of the sea states obtained from other measurements and observations. Furthermore, the estimating characteristics...... of the parametric model are discussed by considering the results of a similar estimation concept based on Bayesian modelling. The purpose of the latter comparison is not to favour the one estimation approach to the other but rather to highlight some of the advantages and disadvantages of the two approaches....

Note from the radioprotection group's shipping service

CERN Multimedia

2006-01-01

Le service SHIPPING du groupe de radioprotection souhaite vous rappeler qu'avant toute expédition de matériel susceptible d'être radioactif, une demande de transport doit être établie par EDH en cochant la case appropriée (danger radioactif). Merci de bien vouloir prendre note des informations figurant dans le site Web: http://cern.ch/service-rp-shipping Toute demande non conforme ne sera pas prise en compte. Radioactive Shipping Service http://cern.ch/service-rp-shippingTél: 73171Fax: 69200

Accuracy of visual wave observation from merchant ships and estimated wave loads; Accuracy of visual wave observation from merchant ships and estimated wave loads

Energy Technology Data Exchange (ETDEWEB)

Kawabe, H. [National Defense Academy, Kanagawa (Japan); Masaoka, K. [University of Osaka Prefecture, Osaka (Japan). Faculty of Engineering

1998-06-01

There is a large number of studies on discussions concerning accuracy of visual observation of waves and the correction method thereon. This paper give considerations on observation accuracy placing a viewpoint on that by merchant ships. Based on ship meteorological observation tables reported to the Meteorological Agency of Japan on meteorology in North Pacific during 14 years from 1976 to1989, wave observation values taken by merchant ships and observation ships were compared statistically to investigate the accuracy of visual wave observations carried out by merchant ships. With regard to wave heights, the observation values taken by the observation ships and the merchant ships have strong correlation, where the merchant ships evaluate them somewhat higher than the observation ships. Regarding wave cycles of wind waves, the merchant ships tend to have the observation values on longer cycle side. Correlation between the observations values by the merchant ships and the observation ships is weak both in wind waves and swells. There is not much of variation in accuracy of observations during daytime and at night performed by the merchant ships. It will be necessary in the future to give considerations on a method to correct the observation values on wave cycles taken by the merchant ship, and on a correction method in which both of the wave cycles and the wave heights are corrected simultaneously to make the observation values of the merchant ship equal to those of the observation ships. Thus, the observation values reported by general merchant ships in a large number every year will have to be utilized more effectively. 11 refs., 21 figs., 2 tabs.

Ships going slow in reducing their NOx emissions: changes in 2005–2012 ship exhaust inferred from satellite measurements over Europe

International Nuclear Information System (INIS)

Boersma, K Folkert; Vinken, Geert C M; Tournadre, Jean

2015-01-01

We address the lack of temporal information on ship emissions, and report on rapid short-term variations of satellite-derived ship NO x emissions between 2005 and 2012 over European seas. Our inversion is based on OMI observed tropospheric NO 2 columns and GEOS-Chem simulations. Average European ship NO x emissions increased by ∼15% from 2005 to 2008. This increase was followed by a reduction of ∼12% in 2009, a direct result of the global economic downturn in 2008–2009, and steady emissions from 2009 to 2012. Observations of ship passages through the Suez Canal and satellite altimeter derived ship densities suggests that ships in the Mediterranean Sea have reduced their speed by more than 30% since 2008. This reduction in ship speed is accompanied by a persistent 45% reduction of average, per ship NO x emission factors. Our results indicate that the practice of ‘slow steaming’, i.e. the lowering of vessel speed to reduce fuel consumption, has indeed been implemented since 2008, and can be detected from space. In spite of the implementation of slow steaming, one in seven of all NO x molecules emitted in Europe in 2012 originated from the shipping sector, up from one in nine in 2005. The growing share of the shipping contributions to the overall European NO x emissions suggests a need for the shipping sector to implement additional measures to reduce pollutant emissions at rates that are achieved by the road transport and energy producing sectors in Europe. (letter)

7 CFR 762.121 - Loan purposes.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Loan purposes. 762.121 Section 762.121 Agriculture... SPECIAL PROGRAMS GUARANTEED FARM LOANS § 762.121 Loan purposes. (a) Operating Loan purposes. (1) Loan... the need to refinance; (viii) Payment of loan closing costs; (ix) Payment of costs associated with...

Documentation for initial testing and inspections of Beneficial Uses Shipping System (BUSS) Cask

International Nuclear Information System (INIS)

Lundeen, J.E.

1994-01-01

The purpose of this report is to compile data generated during the initial tests and inspections of the Beneficial Uses Shipping System (BUSS) Cask. In addition, this report will verify that the testing criteria identified in section 8.1 of the BUSS Cask Safety Analysis Report for Packaging (SARP) was met. The BUSS Cask Model R-1 is a type B shipping container used for shipment of radioactive cesium-137 and strontium-90 capsules to Waste Encapsulation and Storage Facility (WESF). The BUSS Cask body and lid are each one-piece forgings fabricated from ASTM A473, Type 304 stainless steel. The primary purpose of the BUSS Cask is to provide shielding and confinement as well as impact, puncture, and thermal protection for the capsules under both normal and accident conditions. Chapter 8 of the BUSS Cask SARP requires several acceptance tests and inspections, each intended to evaluate the performance of different components of the BUSS Cask system, to be performed before its first use. The results of the tests and inspections required are included in this document

Wallops Ship Surveillance System

Science.gov (United States)

Smith, Donna C.

2011-01-01

Approved as a Wallops control center backup system, the Wallops Ship Surveillance Software is a day-of-launch risk analysis tool for spaceport activities. The system calculates impact probabilities and displays ship locations relative to boundary lines. It enables rapid analysis of possible flight paths to preclude the need to cancel launches and allow execution of launches in a timely manner. Its design is based on low-cost, large-customer- base elements including personal computers, the Windows operating system, C/C++ object-oriented software, and network interfaces. In conformance with the NASA software safety standard, the system is designed to ensure that it does not falsely report a safe-for-launch condition. To improve the current ship surveillance method, the system is designed to prevent delay of launch under a safe-for-launch condition. A single workstation is designated the controller of the official ship information and the official risk analysis. Copies of this information are shared with other networked workstations. The program design is divided into five subsystems areas: 1. Communication Link -- threads that control the networking of workstations; 2. Contact List -- a thread that controls a list of protected item (ocean vessel) information; 3. Hazard List -- threads that control a list of hazardous item (debris) information and associated risk calculation information; 4. Display -- threads that control operator inputs and screen display outputs; and 5. Archive -- a thread that controls archive file read and write access. Currently, most of the hazard list thread and parts of other threads are being reused as part of a new ship surveillance system, under the SureTrak project.

29 CFR 1915.164 - Ship's propulsion machinery.

Science.gov (United States)

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Ship's propulsion machinery. 1915.164 Section 1915.164 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Ship's Machinery and Piping Systems § 1915.164 Ship's...

47 CFR 80.59 - Compulsory ship inspections.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Compulsory ship inspections. 80.59 Section 80... STATIONS IN THE MARITIME SERVICES Applications and Licenses § 80.59 Compulsory ship inspections. (a) Inspection of ships subject to the Communications Act or the Safety Convention. (1) The FCC will not normally...

MASTER OF THE SHIP, MANAGER AND INSTRUCTOR

OpenAIRE

Florin IORDANOAIA

2010-01-01

The master of the ship is the person on the board who has the qualification and the necessary certificate of competency for running a maritime transport ship. He is the one who takes the ship into administration from the ship-owner, he is the only leader, the legal and direct chief of the entire crew, being invested with authority upon all the members of the crew. The master fulfils the attributes and displays his activity according to the legal laws of his flag, of the marine regulations and...

Plastic Pollution from Ships

OpenAIRE

Čulin, Jelena; Bielić, Toni

2016-01-01

The environmental impact of shipping on marine environment includes discharge of garbage. Plastic litter is of particular concern due to abundance, resistance to degradation and detrimental effect on marine biota. According to recently published studies, a further research is required to assess human health risk. Monitoring data indicate that despite banning plastic disposal at sea, shipping is still a source of plastic pollution. Some of the measures to combat the problem are discussed.

Allocation of ESS by interval optimization method considering impact of ship swinging on hybrid PV/diesel ship power system

International Nuclear Information System (INIS)

Wen, Shuli; Lan, Hai; Hong, Ying-Yi; Yu, David C.; Zhang, Lijun; Cheng, Peng

2016-01-01

Highlights: • An uncertainty model of PV generation on board is developed based on the experiments. • The moving and swinging of the ship are considered in the optimal ESS sizing problem. • Optimal sizing of ESS in a hybrid PV/diesel/ESS ship power system is gained by the interval optimization method. • Different cases were studied to show the significance of the proposed method considering the swinging effects on the cost. - Abstract: Owing to low efficiency of traditional ships and the serious environmental pollution that they cause, the use of solar energy and an energy storage system (ESS) in a ship’s power system is increasingly attracting attention. However, the swinging of a ship raises crucial challenges in designing an optimal system for a large oil tanker ship, which are associated with uncertainties in solar energy. In this study, a series of experiments are performed to investigate the characteristics of a photovoltaic (PV) system on a moving ship. Based on the experimental results, an interval uncertainty model of on-board PV generation is established, which considers the effect of the swinging of the ship. Due to the power balance equations, the outputs of the diesel generator and the ESS on a large oil tanker are also modeled using interval variables. An interval optimization method is developed to determine the optimal size of the ESS in this hybrid ship power system to reduce the fuel cost, capital cost of the ESS, and emissions of greenhouse gases. Variations of the ship load are analyzed using a new method, taking five operating conditions into account. Several cases are compared in detail to demonstrate the effectiveness of the proposed algorithm.

Arctic shipping emissions inventories and future scenarios

Directory of Open Access Journals (Sweden)

J. J. Corbett

2010-10-01

Full Text Available This paper presents 5 km×5 km Arctic emissions inventories of important greenhouse gases, black carbon and other pollutants under existing and future (2050 scenarios that account for growth of shipping in the region, potential diversion traffic through emerging routes, and possible emissions control measures. These high-resolution, geospatial emissions inventories for shipping can be used to evaluate Arctic climate sensitivity to black carbon (a short-lived climate forcing pollutant especially effective in accelerating the melting of ice and snow, aerosols, and gaseous emissions including carbon dioxide. We quantify ship emissions scenarios which are expected to increase as declining sea ice coverage due to climate change allows for increased shipping activity in the Arctic. A first-order calculation of global warming potential due to 2030 emissions in the high-growth scenario suggests that short-lived forcing of ~4.5 gigagrams of black carbon from Arctic shipping may increase global warming potential due to Arctic ships' CO₂ emissions (~42 000 gigagrams by some 17% to 78%. The paper also presents maximum feasible reduction scenarios for black carbon in particular. These emissions reduction scenarios will enable scientists and policymakers to evaluate the efficacy and benefits of technological controls for black carbon, and other pollutants from ships.

Improving the competitiveness of green ship recycling

NARCIS (Netherlands)

Jain, K.P.

2017-01-01

The end of life of a ship is determined by its owner on the basis of various commercial and technical factors. Once decided to scrap a ship, almost all end-of-life (EOL) ships are sold to recycling yards for dismantling; except for a few which are converted into museums, hotels, storage, and

Achieving Energy Efficient Ship Operations Under Third Party Management

DEFF Research Database (Denmark)

Taudal Poulsen, René; Sornn-Friese, Henrik

2015-01-01

Profitable energy saving measures are often not fully implemented in shipping, causing energy efficiency gaps. The paper identifies energy efficiency gaps in ship operations, and explores their causes. Lack of information on energy efficiency, lack of energy training at sea and onshore and lack...... of time to produce and provide reliable energy efficiency information cause energy efficiency gaps. The paper brings together the energy efficiency and ship management literatures, demonstrating how ship management models influence energy efficiency in ship operations. Achieving energy efficiency in ship...

Analysis of Ship Groundings on Soft Sea Beds

DEFF Research Database (Denmark)

Simonsen, Bo Cerup; Pedersen, Preben Terndrup

1997-01-01

it influences the ship heave and pitch motions as well as the friction between the ship and the soil.In this paper a rational calculation model is presented for the sea bed soil reaction forces on the ship bottom. The model is based on the assumption that the penetration of the ship bow generates a flow of pore......The consequences associated with ships running aground depend very much on the soil characteristics of the sea bed and the geometrical shape of the ship bow. The penetration into the sea bed depends on these factors and the penetration is an important factor for the ship motion because...... by the theory of frictional soils in rupture. Frictional stresses on the bow surface are assumed to be related to the normal pressure by a simple Coulumb relation. The total soil reaction as a function of velocity and penetration is found by integration of normal pressure and frictional stresses over...

Mathematical and numerical models to achieve high speed with special-purpose parallel processors

International Nuclear Information System (INIS)

Cheng, H.S.; Wulff, W.; Mallen, A.N.

1986-01-01

Historically, safety analyses and plant dynamic simulations have been and still are being carried out be means of detailed FORTRAN codes on expensive mainframe computers in time-consuming batch processing mode. These codes have grown to be so expensive to execute that their utilization depends increasingly on the availability of very expensive supercomputers. Thus, advanced technology for high-speed, low-cost, and accurate plant dynamic simulations is very much needed. Ideally, a low-cost facility based on a modern minicomputer can be dedicated to the staff of a power plant, which is easy and convenient to use, and which can simulate realistically plant transients at faster than real-time speeds. Such a simulation capability can enhance safety and plant utilization. One such simulation facility that has been developed is the Brookhaven National Laboratory (BNL) Plant Analyzer, currently set up for boiling water reactor plant simulations at up to seven times faster than real-time process speeds. The principal hardware components of the BNL Plant Analyzer are two units of special-purpose parallel processors, the AD10 of Applied Dynamics International and a PDP-11/34 host computer

Exploring the scope for complementary sub-global policy to mitigate CO2 from shipping

International Nuclear Information System (INIS)

Gilbert, Paul; Bows, Alice

2012-01-01

For a high probability of avoiding dangerous interference with the climate system, all sectors must decarbonise over coming decades. Although shipping is an energy efficient transport mode, its emissions continue to grow. Compounding this, the sector's complexity, exclusion from emission inventories and slow progress towards a mitigation strategy, limit drivers towards meaningful change. Whilst there remains a preference within the industry for global mitigation policies, the urgency of required emission cuts necessitates exploration of complimentary sub-global measures. The debate surrounding such measures tends to focus on apportioning global shipping emissions to nations. To explore the policy implications of apportionment, the UK is used in this paper to illustrate how available apportionment regimes produce a wide range of emission estimates. Moreover, in the absence of transparent fuel consumption and freight data, they have limited sensitivity, rendering them currently obsolete for monitoring purposes. Nations, regions and organisations influence shipping, particularly in relation to operations, yet debate surrounding apportionment has arguably delayed consideration of sub-global polices and indicators. This paper makes a case for putting the apportionment debate aside in the short-term to open out the full span of options, consider influence over aspects of the shipping system, and how to monitor success. - Highlights: ► Debate on sub-global CO 2 policies for shipping focuses on emission apportionment. ► Data limitations prevent apportionment regimes from monitoring policy success. ► Nations, regions and organisations directly influence shipping at sub-global levels. ► Sub-global policies influence demand and operations in ports/waters. ► Policy should focus on what can be influenced and consider how to monitor progress.

An Adaptive Ship Detection Scheme for Spaceborne SAR Imagery

Directory of Open Access Journals (Sweden)

Xiangguang Leng

2016-08-01

Full Text Available With the rapid development of spaceborne synthetic aperture radar (SAR and the increasing need of ship detection, research on adaptive ship detection in spaceborne SAR imagery is of great importance. Focusing on practical problems of ship detection, this paper presents a highly adaptive ship detection scheme for spaceborne SAR imagery. It is able to process a wide range of sensors, imaging modes and resolutions. Two main stages are identified in this paper, namely: ship candidate detection and ship discrimination. Firstly, this paper proposes an adaptive land masking method using ship size and pixel size. Secondly, taking into account the imaging mode, incidence angle, and polarization channel of SAR imagery, it implements adaptive ship candidate detection in spaceborne SAR imagery by applying different strategies to different resolution SAR images. Finally, aiming at different types of typical false alarms, this paper proposes a comprehensive ship discrimination method in spaceborne SAR imagery based on confidence level and complexity analysis. Experimental results based on RADARSAT-1, RADARSAT-2, TerraSAR-X, RS-1, and RS-3 images demonstrate that the adaptive scheme proposed in this paper is able to detect ship targets in a fast, efficient and robust way.

On the collision protection of ships

International Nuclear Information System (INIS)

Jones, N.

1976-01-01

A brief survey of the literature extant on the collision protection of ships is presented herein. An examination of the characteristics of different energy-absorbing methods suggests that honeycomb structures provide an alternative to deck structures which are currently used to achieve the collision protection of ships. Various features of honeycomb panels are explored and a particular structural arrangement which utilizes both sides of a hull and incorporates honeycomb panels is proposed for the collision protection of a ship. (Auth.)

UAV observation of newly formed volcanic island, Nishinoshima, Japan, from a ship

Science.gov (United States)

Ohminato, T.; Kaneko, T.; Takagi, A.

2016-12-01

We conducted an aerial observation at Nishinoshima island, south of Japan, from Jun 7 to Jun 9, 2016 by using an Unmanned Aerial Vehicle (UAV), a radio controlled small helicopter. Takeoff and landing of the UAV was conducted on a ship. Nishinoshima is a small island, 130km west of Chichijima in Ogasawara Islands, Japan. New eruption started in November 2013 in a shallow sea approximately 400 m southeast of the existing Nishinoshima Island. It started from a small islet and evolved with 1-5 × 105 m3/day discharge rate (Maeno et al, 2016). In late December 2013, the islet coalesced with the existing Nishinoshima. In 16 month, the lava field reached 2.6×106 m2and covered almost all of the existing Nishinoshima. Human landing upon the newly formed part of the island has still been prohibited due to the danger of sudden eruptions. Before our mission, some pumice or rock samples had been taken from the island but their amount was not enough to conduct detailed petrological analyses. The evolution of the lava field from the central cone has been well documented by using images taken from satellites and airplanes. However, due to the limited resolution of satellite images or photos taken from distant airplanes, there still be uncertainties in detailed morphological evolution of lava flows. The purpose of our observation includes, 1) sampling of pyroclasts near the central cone in order to investigate the condition of magma chamber and magma ascent process, and 2) taking high resolution 4K images in order to clarify the characteristic morphology of the lava flow covering the island. During the three days operation, we were successfully able to sample 250g of pyroclasts and to take 1.5TB of 4K movies. Conducting UAV's takeoff and landing on a ship was not an easy task. We used a marine research ship, Keifu-Maru, operated by Japan Meteorological Agency. The ship size is 1483 tons. On the ship deck, there are several structures which can interfere with the helicopter

Observations and computations of narrow Kelvin ship wakes

OpenAIRE

Francis Noblesse; Chenliang Zhang; Jiayi He; Yi Zhu; Chenjun Yang; Wei Li

2016-01-01

Computations of far-field ship waves, based on linear potential flow theory and the Hogner approximation, are reported for monohull ships and catamarans. Specifically, far-field ship waves are computed for six monohull ships at four Froude numbers F≡V/gL=0.58, 0.68, 0.86, 1.58 and for six catamarans with nondimensional hull spacing s≡S/L=0.25 at two Froude numbers Fs≡V/gS=1 and 2.5. Here, g is the gravitational acceleration, V and L denote the ship speed and length, and S is the separation di...

Demands made on high-purity copper for special purposes

International Nuclear Information System (INIS)

Roettges, D.

1977-01-01

The properties (electrical resistivity, residual impurities) of high-purity copper produced on a technical scale are reported as well as its practical applications. The paper discusses a high-oxygen copper (SV) with low residual resistivity at low temperatures and an oxygen-free (hydrogen-stable) copper (BE electronic) with low gas content. The SV quality has been specially developed for use as stabilizer in superconductors while the BE quality is used in high and ultrahigh vacuum. (GSC) [de

Ship Domain Model for Multi-ship Collision Avoidance Decision-making with COLREGs Based on Artificial Potential Field

Directory of Open Access Journals (Sweden)

TengFei Wang

2017-03-01

Full Text Available A multi-ship collision avoidance decision-making and path planning formulation is studied in a distributed way. This paper proposes a complete set of solutions for multi-ship collision avoidance in intelligent navigation, by using a top-to-bottom organization to structure the system. The system is designed with two layers: the collision avoidance decision-making and the path planning. Under the general requirements of the International Regulations for Preventing Collisions at Sea (COLREGs, the performance of distributed path planning decision-making for anti-collision is analyzed for both give-way and stand-on ships situations, including the emergency actions taken by the stand-on ship in case of the give-way ship’s fault of collision avoidance measures. The Artificial Potential Field method(APF is used for the path planning in details. The developed APF method combined with the model of ship domain takes the target ships’ speed and course in-to account, so that it can judge the moving characteristics of obstacles more accurately. Simulation results indicate that the system proposed can work effectiveness.

Simulations of diocotron instability using a special-purpose computer, MDGRAPE-2

International Nuclear Information System (INIS)

Yatsuyanagi, Yuichi; Kiwamoto, Yasuhito; Ebisuzaki, Toshikazu; Hatori, Tadatsugu; Kato, Tomokazu

2003-01-01

The diocotron instability in a low-density non-neutral electron plasma is examined via numerical simulations. For the simulations, a current-vortex filament model and a special-purpose computer, MDGRAPE-2 are used. In the previous work, a simulation method based on the current-vortex filament model, which is called 'current-vortex method', is developed. It is assumed that electric current and vorticity have discontinuous filamentary distributions, and both point electric current and point vortex are confined in a filament, which is called 'current-vortex filament'. In this paper, the current-vortex method with no electric current is applied to simulations of the non-neutral electron plasma. This is equivalent to the traditional point-vortex method. MDGRAPE-2 was originally designed for molecular dynamics simulations. It accelerates calculations of the Coulomb interactions, the van der Waals interactions and so on. It can also be used to accelerate calculations of the Biot-Savart integral. The diocotron modes reproduced by the simulations agree with the result predicted by linear theory. This indicates that the current-vortex method is applicable to problems of the non-neutral plasma. The linear growth rates of the diocotron instability in the simulations also agree with the theoretical ones. This implies that MDGRAPE-2 gives the sufficiently accurate results for the calculations of the current-vortex method. A mechanism of merging of electron clumps is demonstrated by the simulations. It is concluded that the electric field induced by the conducting wall makes the nonlinear stage unstable and causes the clumps to merge

Special purpose materials: an assessment of needs and the role of these materials in the national program

International Nuclear Information System (INIS)

Gold, R.E.; Clinard, F.W. Jr.; Davis, J.W.

1978-01-01

The scope of activities of the Task Group on Special Purpose Materials includes those materials requirements not specifically addressed by the other OFE materials task groups. These materials can be organized according to seven broad materials applications or functions which appear to be generic to all magnetically confined fusion reactor concepts. These are breeding materials, coolants, materials for tritium service, graphite and silicon carbide, electrical insulators and ceramics, heat-sink materials, and magnet materials. The present paper describes the importance of each of these areas of materials technology, outlines major problems or areas of uncertainty, and reviews past and current contributions to our state of understanding as it may relate to fusion power applications

Nuclear ship accidents, description and analysis

International Nuclear Information System (INIS)

Oelgaard, P.L.

1993-03-01

In this report available information on 44 reported nuclear ship events is considered. Of these 6 deals with U.S. ships and 38 with USSR ships. The ships are in almost all cases nuclear submarines. Only events that involve the sinking of vessels, the nuclear propulsion plants, radiation exposures, fires/ explosions, sea-water leaks into the submarines and sinking of vessels are considered. Comments are made on each of the events, and at the end of the report an attempt is made to point out the weaknesses of the submarine designs which have resulted in the accidents. It is emphasized that some of the information of which this report is based, may be of dubious nature. Consequently some of the results of the assessments made may not be correct. (au)

West Valley facility spent fuel handling, storage, and shipping experience

International Nuclear Information System (INIS)

Bailey, W.J.

1990-11-01

The result of a study on handling and shipping experience with spent fuel are described in this report. The study was performed by Pacific Northwest Laboratory (PNL) and was jointly sponsored by the US Department of Energy (DOE) and the Electric Power Research Institute (EPRI). The purpose of the study was to document the experience with handling and shipping of relatively old light-water reactor (LWR) fuel that has been in pool storage at the West Valley facility, which is at the Western New York Nuclear Service Center at West Valley, New York and operated by DOE. A subject of particular interest in the study was the behavior of corrosion product deposits (i.e., crud) deposits on spent LWR fuel after long-term pool storage; some evidence of crud loosening has been observed with fuel that was stored for extended periods at the West Valley facility and at other sites. Conclusions associated with the experience to date with old spent fuel that has been stored at the West Valley facility are presented. The conclusions are drawn from these subject areas: a general overview of the West Valley experience, handling of spent fuel, storing of spent fuel, rod consolidation, shipping of spent fuel, crud loosening, and visual inspection. A list of recommendations is provided. 61 refs., 4 figs., 5 tabs

Feasibility Study on Nuclear Propulsion Ship according to Economic Evaluation

Energy Technology Data Exchange (ETDEWEB)

Gil, Youngmi; Yoo, Seongjin; Oh, June; Byun, Yoonchul; Woo, Ilguk [Daewoo Shipbuilding and Marine Engineering Co., Ltd, Seoul (Korea, Republic of); Kim, Jiho; Choi, Suhn [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-05-15

The use of nuclear ships has been extending to the icebreaker, the deep-water exploration ship, and the floating nuclear power plant. Prior to developing the new ship, the relevant regulations need to be considered. In this study, we reviewed the nuclear ship-related regulations. In addition, economic value is one of the most important factors which should be considered in the pre-design phase. To evaluate the economics of the nuclear ship, we calculated Capital Expenditure (abbreviated as CAPEX) and Operation Expenditure (abbreviated as OPEX) for various types of ships. We reviewed the nuclear ship-related regulations and evaluated the economics of the nuclear ship compared to the diesel ship. The calculation result shows that economic feasibility of the nuclear ship depends on the oil price as well as the cost of the nuclear reactor.

Designing Indonesian Liner Shipping Network

Directory of Open Access Journals (Sweden)

Armand Omar Moeis

2017-06-01

Full Text Available As the largest archipelago nation in the world, Indonesia’s logistics system has not shown excellence according to the parameters of logistics performance index and based on logistics costs percentages from overall GDP. This is due to the imbalances of trading on the western and eastern regions in Indonesia, which impacts the transportation systems costs to and from the eastern regions. Therefore, it is imperative to improve the competitiveness of Indonesian maritime logistics through maritime logistics network design. This research will focus on three levels of decision making in logistics network design, which include type of ships in the strategic level, shipping routes in the tactical level, and container allocation in the operational level with implementing butterfly routes in Indonesia’s logistics networking problems. Furthermore, this research will analyze the impact of Pendulum Nusantara and Sea Toll routes against the company profits and percentages of containers shipped. This research will also foresee how demand uncertainties and multi-period planning should affect decision making in designing the Indonesian Liner Shipping Network.

Special Needs Assistants--The Special Characteristic and Strength of the School System of Finland

Science.gov (United States)

Mäensivu, Kati-Tuulia; Uusiautti, Satu; Määttä, Kaarina

2012-01-01

The contribution of special needs assistants (SNA) is becoming increasingly important in inclusive and special classrooms. However, the profession itself has remained unexplored. The purpose of this article is to describe special needs assistants' perceptions on their education, professional competence, the content and significance of their work…

The Liner Shipping Fleet Repositioning Problem with Cargo Flows

DEFF Research Database (Denmark)

Tierney, Kevin; Jensen, Rune Møller

2012-01-01

We solve an important problem for the liner shipping industry called the Liner Shipping Fleet Repositioning Problem (LSFRP). The LSFRP poses a large financial burden on liner shipping firms. During repositioning, vessels are moved between services in a liner shipping network. Shippers wish...

Facts about Noroviruses on Cruise Ships

Science.gov (United States)

... Cruise Tips for Healthy Cruising Related Resources Cruise Ship Inspection Scores & Information Inspection Scores Cruise Line Directory Green ... 800-CDC-INFO ( 1-800-232-4636 ). Cruise Ship Inspection Scores & Information Inspection Scores Cruise Line Directory Green ...

Techno-economic investigation of alternative propulsion plants for Ferries and RoRo ships

International Nuclear Information System (INIS)

Livanos, George A.; Theotokatos, Gerasimos; Pagonis, Dimitrios-Nikolaos

2014-01-01

Highlights: • Alternative Diesel and Gas engine propulsion plants of Ferries and RoRos were studied. • Special focus on marine Natural Gas burning engines and ship waste heat recovery systems. • Significant savings in annual operating costs were predicted in the case of Natural Gas engines. • Environmental and economic optimum propulsion plant alternative was proposed in a specific case study. - Abstract: In this paper, the main alternative propulsion plants based on reciprocating internal combustion engines of a ferry or RoRo ship operating in routes that include Emission Control Areas (ECAs) are comparatively assessed. Specifically, a dual fuel engine propulsion plant is compared with a conventional Diesel engine plant. For both cases, the installation of a waste heat recovery system, which covers a part of the ship electric energy demand, is also considered. The ship main DF engines are assumed to operate using LNG and a small amount of MDO for initiating combustion, whereas low sulphur MDO was regarded as the fuel for the case of the Diesel engine plant. The installation of Selective Catalytic Reduction (SCR) after-treatment unit for reducing the NOx emissions for the case of Diesel engines plant is also taken into account. The propulsion plants were modelled under steady state conditions, and the simulation results were analysed in order to compare the alternative configurations. Furthermore, the Energy Efficiency Design Index (EEDI) values were calculated and the two examined propulsion system cases were compared on EEDI basis. Finally, the Life Cycle Cost for each alternative propulsion plant was calculated and used for completing an economic evaluation of the Dual fuel propulsion plant versus the conventional designs applied in ferries

Black carbon from ships: a review of the effects of ship speed, fuel quality and exhaust gas scrubbing

Science.gov (United States)

Lack, D. A.; Corbett, J. J.

2012-05-01

The International Maritime Organization (IMO) has moved to address the health and climate impact of the emissions from the combustion of low-quality residual fuels within the commercial shipping industry. Fuel sulfur content (FS) limits and an efficiency design index for future ships are examples of such IMO actions. The impacts of black carbon (BC) emissions from shipping are now under review by the IMO, with a particular focus on the potential impacts of future Arctic shipping. Recognizing that associating impacts with BC emissions requires both ambient and onboard observations, we provide recommendations for the measurement of BC. We also evaluate current insights regarding the effect of ship speed (engine load), fuel quality and exhaust gas scrubbing on BC emissions from ships. Observations demonstrate that BC emission factors (EFBC) increases 3 to 6 times at very low engine loads (engine load, even with reduced load fuel savings. If fleets were required to operate at lower maximum engine loads, presumably associated with reduced speeds, then engines could be re-tuned, which would reduce BC emissions. Ships operating in the Arctic are likely running at highly variable engine loads (25-100%) depending on ice conditions and ice breaking requirements. The ships operating at low load may be emitting up to 50% more BC than they would at their rated load. Such variable load conditions make it difficult to assess the likely emissions rate of BC. Current fuel sulfur regulations have the effect of reducing EFBC by an average of 30% and potentially up to 80% regardless of engine load; a removal rate similar to that of scrubbers. Uncertainties among current observations demonstrate there is a need for more information on a) the impact of fuel quality on EFBC using robust measurement methods and b) the efficacy of scrubbers for the removal of particulate matter by size and composition.

Liner Shipping Fleet Deployment with Sustainable Collaborative Transportation

Directory of Open Access Journals (Sweden)

Gang Du

2016-02-01

Full Text Available Facing sharp competition in the market for shipping companies, it is necessary to make reasonable and efficient decisions to optimize the container shipping line network so as to improve the shipping efficiency and reduce the transportation cost, as well as to realize the transportation sustainability. Therefore, the liner ship fleet deployment problem with collaborative transportation is proposed in this paper. This problem is formulated as a mixed-integer linear programming model that takes collaborative transportation into consideration. The model includes fixed cost, variable cost, berth cost, transport cost, penalty, compensation cost, and so on. To achieve the sustainable development of collaborative transportation, the shipping companies could make a selection between the internal routes and the external routes to serve each task by comparing the distance between the above routes. A real Asia-Europe-Oceania numerical experiment shows that the proposed sustainable collaborative transportation model can be efficiently solved by C++ calling ILOG CPLEX. Results demonstrate that the optimized shipping line network with sustainable collaborative transportation can improve the service efficiency, as well as the service level of shipping companies.

Use of high dose irradiation for development of special purposed foods

International Nuclear Information System (INIS)

Yoon, Yohan; Lee, Ju-Woon

2009-01-01

Full text: FAO/WHO Food Safety Committee indicated that food borne disease is one of the most widespread threats to human health and is ever increasing, which requires a national measure against the problems in public health and consequent economic productivity. The increasing demand for convenient foods as well as safer foods needs new technologies with potentials to solve or complement the limitations of existing methods for preserving and improving the food quality and safety. There are various techniques for preserving foods, most of which have problems in terms of effectiveness, quality, safety, economic feasibility, and environmental impact. Food irradiation has been studied more extensively and scientifically than any other food processing technologies. It is a physical method for food treatment comparable to heat pasteurization, canning or freezing. The process involves exposing foods, either packaged or in bulk, to one of three types of ionizing energy: gamma rays, machine-generated electrons or X-rays. Food irradiation is a promising food safety technology that can eliminate spoilage and pathogens from foods. However, low consumer acceptance of irradiated foods has been become an obstacle to make food irradiation technology as widely accepted method. Thus, use of the technology in development of special-purposed foods should be a first step to make irradiation technology as a common decontamination method in food industry. Korea Atomic Energy Research Institute (KAERI) has used irradiation technology to develop space foods for astronauts, and four Korean foods (Kimchi: fermented vegetable, Ramen: ready-to-cook noodles, Saengshik bar: raw grain bar, Sujeonggwa: cinnamon beverage) were certificated by Institute of Biomedical Problems, followed by sensory and quality evaluation in International Space Stations. With this previous research experience, KAERI has researched on development of patient foods and military rations. Hospital patients are a special

Distributed propulsion for ships

OpenAIRE

Nylund, Vilde

2017-01-01

It is anticipated that using distributed electric propulsion (DEP) on conventional ships will increase the total propulsive efficiency. This is mainly due to two reasons; firstly, because the total propeller disk area can be increased. Secondly, because each propeller can be optimised for the local wake where it is operating. In this work, the benefits of using DEP has been investigated for a 14 000 TEU container ship. Based on a literary study of the present state of propeller modelling ...

INFLUENCE OF OPERABILITY CRITERIA LIMITING VALUES ON SHIP SPEED

Directory of Open Access Journals (Sweden)

Jasna Prpić-Oršić

2016-09-01

Full Text Available When the ship is caught in heavy seas, there are two manoeuvres that the shipmaster can undertake to avoid excessive ship motion and hull damage: changing course or voluntary speed reduction. This paper presents a study of the effect of the various voluntary speed reduction criteria to attainable speed of ship on seaway. The speed loss is calculated by taking into account wind and wave effect on ship speed, the engine and propeller performance in actual seas as well as the mass inertia of the ship. The attainable ship speed for ship in head, following and beam waves by accounting for voluntary speed reduction is estimated for various significant wave height. The criteria of slamming, deck wetness, propeller emergence, excessive accelerations and roll are taken into account. The impact of variations of the limiting values of certain criteria due to which the captain intentionally reduces the ship speed is analysed and discussed.

Report of nuclear powered ship meeting

International Nuclear Information System (INIS)

Anon.

1983-01-01

The research and development of nuclear powered ships in Japan have been advanced centering around the Japan Nuclear Ship Development Agency established in 1963. It is regretful that the development of ''Mutsu'' is largely behind the schedule due to the radiation leak in 1974, and the expected objective has not yet been attained even today. The government decided to advance the research on the improvement of marine nuclear reactors in 1980, and this new research function was given to the Agency by changing its organization. However, recently various arguments have arisen concerning the way of the research and development of nuclear ships in Japan centering around ''Mutsu'', such as the necessity of developing nuclear ships, the enormous expenditure for the development, the aging of ''Mutsu'' more than 10 years after the construction, the introduction of nuclear ship technology from foreign countries and so on. By the end of fiscal 1984, the Agency is expected to merge with other organization related to atomic energy, therefore, it is necessary to decide the way of research and development. This meeting organized by the Atomic Energy Commission makes this report to show the way of thinking about the above arguments. (Kako, I.)

Development of software for handling ship's pharmacy.

Science.gov (United States)

Nittari, Giulio; Peretti, Alessandro; Sibilio, Fabio; Ioannidis, Nicholas; Amenta, Francesco

2016-01-01

Ships are required to carry a given amount of medicinal products and medications depending on the flag and the type of vessel. These medicines are stored in the so called ship's "medicine chest" or more properly - a ship pharmacy. Owing to the progress of medical sciences and to the increase in the mean age of seafarers employed on board ships, the number of pharmaceutical products and medical devices required by regulations to be carried on board ships is increasing. This may make handling of the ship's medicine chest a problem primarily on large ships sailing on intercontinental routes due to the difficulty in identifying the correspondence between medicines obtained abroad with those available at the national market. To minimise these problems a tool named Pharmacy Ship (acronym: PARSI) has been developed. The application PARSI is based on a database containing the information about medicines and medical devices required by different countries regulations. In the first application the system was standardised to comply with the Italian regulations issued on the 1st October, 2015 which entered into force on the 18 January 2016. Thanks to PARSI it was possible to standardize the inventory procedures, facilitate the work of maritime health authorities and make it easier for the crew, not professional in the field, to handle the 'medicine chest' correctly by automating the procedures for medicines management. As far as we know there are no other similar tools available at the moment. The application of the software, as well as the automation of different activities, currently carried out manually, will help manage (qualitatively and quantitatively) the ship's pharmacy. The system developed in this study has proved to be an effective tool which serves to guarantee the compliance of the ship pharmacy with regulations of the flag state in terms of medicinal products and medications. Sharing the system with the Telemedical Maritime Assistance Service may result in

A status report on the development and certification of the Beneficial Uses Shipping System (BUSS) cask

International Nuclear Information System (INIS)

Yoshimura, H.R.; Bronowski, D.R.

1996-01-01

In the early 1980s, the US Department of Energy (DOE) implemented a program to encourage beneficial uses of nuclear byproduct materials, such as cesium-137 and strontium-90, created during the production of defense materials. Potential uses of the cesium-137 ( 137 CS) isotope included sterilizing medical products, maintaining the quality of certain food products, and disinfecting municipal sewage sludge. Strontium-90 ( 90 Sr) is a good heat source and has been used in thermoelectric generators and other products that require a constant supply of heat. During that same period, a proposed facility in Albuquerque, New Mexico, was designed to use cesium-137 to sterilize sewage sludge. To support the sewage sludge treatment facility, Sandia National Laboratories was funded by the DOE to develop a Nuclear Regulatory Commission (NRC)-certified Type B shipping container to transport cesium chloride (CsCl) or strontium fluoride (SrF 2 ) capsules produced by the Hanford Waste Encapsulation and Storage Facility (WESF) in the State of Washington. The primary purpose of the Beneficial Uses Shipping System (BUSS) cask is to provide shielding and confinement, as well as impact, puncture, and thermal protection for certified, special form contents during transport under normal and hypothetical accident conditions. The BUSS cask was designed to meet dimensional and weight constraints of the WESF and user facilities. Attaining as-low-as-reasonably-achievable (ALARA) radiation exposures in the design and operation of the transport system was a major design goal. Another goal was to obtain regulatory approval of the design by preparing a safety analysis report for packaging (SARP) (Yoshimura et al. 1993)

A Ship Cargo Hold Inspection Approach Using Laser Vision Systems

OpenAIRE

SHEN Yang; ZHAO Ning; LIU Haiwei; MI Chao

2013-01-01

Our paper represents a vision system based on the laser measurement system (LMS) for bulk ship inspection. The LMS scanner with 2-axis servo system is installed on the ship loader to build the shape of the ship. Then, a group of real-time image processing algorithms are implemented to compute the shape of the cargo hold, the inclination angle of the ship and the relative position between the ship loader and the cargo hold. Based on those computed inspection data of the ship, the ship loader c...

Ultimate Strength of Ship Hulls under Torsion

DEFF Research Database (Denmark)

Paik, Jeom Kee; Thayamballi, Anil K.; Pedersen, Preben Terndrup

2001-01-01

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characte......For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength...... characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections...... subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical...

Oil-water separators for use in ships

Energy Technology Data Exchange (ETDEWEB)

Parry, G.; Nuttall, P.J.

1978-11-04

After ratification by the United Nations Assembly of the 15 ppm limit for the oil content in water discharges from ships, as recommended by the Intergovernmental Maritime Consultative Organization, all oil separating systems used to treat cargo tank washings, oil-contaminated ballast water from double-bottom tanks, engineroom bilge water, or oily sludge from self-cleaning fuel oil purifiers, will be subjected to a stringent test procedure specified by IMCO. This specification requires the use of centrifugal supply pumps capable of discharging at 1.5 times the separator capacity and operating at over 1000 rpm. To meet the 15 ppm standards, filtration or coalescence equipment must be added to conventional single-stage static separators. Tests by Alexander Esplen and Co. Ltd. showed that a two-stage Comyn coagulator incorporating elements specially designed by Vokes Ltd. meets the IMCO requirements. Separator system control and maintenance problems are discussed.

46 CFR 71.75-5 - Passenger Ship Safety Certificate.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Passenger Ship Safety Certificate. 71.75-5 Section 71.75-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS INSPECTION AND... Passenger Ship Safety Certificate. (a) All vessels on an international voyage are required to have a...

Quantification Methods of Management Skills in Shipping

Directory of Open Access Journals (Sweden)

Riana Iren RADU

2012-04-01

Full Text Available Romania can not overcome the financial crisis without business growth, without finding opportunities for economic development and without attracting investment into the country. Successful managers find ways to overcome situations of uncertainty. The purpose of this paper is to determine the managerial skills developed by the Romanian fluvial shipping company NAVROM (hereinafter CNFR NAVROM SA, compared with ten other major competitors in the same domain, using financial information of these companies during the years 2005-2010. For carrying out the work it will be used quantification methods of managerial skills to CNFR NAVROM SA Galati, Romania, as example mentioning the analysis of financial performance management based on profitability ratios, net profit margin, suppliers management, turnover.

Predictive power of inspection outcomes for future shipping accidents – an empirical appraisal with special attention for human factor aspects

NARCIS (Netherlands)

C. Heij (Christiaan); S. Knapp (Sabine)

2018-01-01

textabstractThis paper investigates whether deficiencies detected during port state control (PSC) inspections have predictive power for future accident risk, in addition to other vessel-specific risk factors like ship type, age, size, flag, and owner. The empirical analysis links accidents to past

Solvency and Liquidity in Shipping Companies

Directory of Open Access Journals (Sweden)

Heejung Yeo

2016-12-01

Full Text Available This study examines factors affecting the solvency of shipping firms. The paper uses a panel dataset and employs the GLM and FGLS regression analyses. This study explores the financial structure of top 130 shipping firms provided by the Factiva database during the period between 2009 and 2013. The paper finds that liquidity is closely related to the leverage of shipping companies. The negative association between the asset liquidity and the leverage level implies that there exist conflicts of interest between managers and investors. Shipping firms have a comfortable high liquidity position, but they have a high degree of leverage. They need to take steps to reduce debts. There is evidence of heterogeneity in the determinants of leverage level. The paper also finds that the variables such as profitability, FSIZE, FAGE influence differently the leverage level whether the debt is short-term or long-term.

46 CFR Sec. 5 - Measures to protect ship's payrolls.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Measures to protect ship's payrolls. Sec. 5 Section 5... SHIP'S PERSONNEL Sec. 5 Measures to protect ship's payrolls. (a) General Agents are not required to consider the amount of the payroll delivered to the Master at the conclusion of a voyage in determining the...

Model for Estimation of Fuel Consumption of Cruise Ships

Directory of Open Access Journals (Sweden)

Morten Simonsen

2018-04-01

Full Text Available This article presents a model to estimate the energy use and fuel consumption of cruise ships that sail Norwegian waters. Automatic identification system (AIS data and technical information about cruise ships provided input to the model, including service speed, total power, and number of engines. The model was tested against real-world data obtained from a small cruise vessel and both a medium and large cruise ship. It is sensitive to speed and the corresponding engine load profile of the ship. A crucial determinate for total fuel consumption is also associated with hotel functions, which can make a large contribution to the overall energy use of cruise ships. Real-world data fits the model best when ship speed is 70–75% of service speed. With decreased or increased speed, the model tends to diverge from real-world observations. The model gives a proxy for calculation of fuel consumption associated with cruise ships that sail to Norwegian waters and can be used to estimate greenhouse gas emissions and to evaluate energy reduction strategies for cruise ships.

An approach to high speed ship ride quality simulation

Science.gov (United States)

Malone, W. L.; Vickery, J. M.

1975-01-01

The high speeds attained by certain advanced surface ships result in a spectrum of motion which is higher in frequency than that of conventional ships. This fact along with the inclusion of advanced ride control features in the design of these ships resulted in an increased awareness of the need for ride criteria. Such criteria can be developed using data from actual ship operations in varied sea states or from clinical laboratory experiments. A third approach is to simulate ship conditions using measured or calculated ship motion data. Recent simulations have used data derived from a math model of Surface Effect Ship (SES) motion. The model in turn is based on equations of motion which have been refined with data from scale models and SES of up to 101 600-kg (100-ton) displacement. Employment of broad band motion emphasizes the use of the simulators as a design tool to evaluate a given ship configuration in several operational situations and also serves to provide data as to the overall effect of a given motion on crew performance and physiological status.

A solution for the integration of finite element analysis in a ship design environment

International Nuclear Information System (INIS)

Finifter, D.; Wyniecki, P.; Castel, J. de

1982-01-01

The DEMAIN system for the pre- and post-processing of finite element analyses of ship structures is presented. It is shown that this new modelling concept, although being self-contained and specialized, has features which relate it to computer-aided design applications of a more general nature. Thus, compared to other finite element pre/post-processors, it allows a more natural occurrence of the structural analysis task in the design flow and can be considered a major step towards an integrated design and analysis system. (orig.)

Game Strategies of Ship in the Collision Situations

Directory of Open Access Journals (Sweden)

Jozef Lisowski

2014-03-01

Full Text Available The paper introduced the basic model of process of safe ship control in a collision situation using a game model with j objects, which includes non-linear state equations and non-linear, time varying constraints of the state variables as well as the quality game control index in the forms of the game integral payment and the final payment. Approximated model of the process control as the model of multi-step matrix game in the form of dual linear programming problem has been adopted here. The Game Ship Control GSC computer program has been designed in the Matlab/Simulink software in order to determine the own ship's safe trajectory. These considerations have been illustrated with examples of a computer simulation using an GSC program for determining the safe ship's trajectory in real navigational situation. Simulation research were passed for five sets of strategies of the own ship and met ships.

Some considerations on the safety of nuclear ships

International Nuclear Information System (INIS)

Kuramoto, Masaaki

1978-01-01

For realizing the practical utilization of nuclear merchant ships, it is essential to gain their acceptance by maritime countries on an equal footing with conventional vessels, and to have the administrative procedures for their admission simplified. This, however cannot be expected to be attained overnight, and progressive measures will have to be adopted, to approach the ultimate goal step by step. The first step should be to demonstrate the safety of nuclear propulsion, for which nuclear ships must accumulate their mileages of safe service. The second important step is to simplify the procedures demanded of nuclear ships for access to ports, through the establishment of international safety standards and design criteria, the enforcement of safety measures covering the entrance of nuclear ships into ports, and the assurance of safety in he repair, inspection and refuelling operations of these ships. Among these measures, the considerations relevant to port entry are the subject of vital interest to both ship operators and port authorities

46 CFR 169.817 - Master to instruct ship's company.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Master to instruct ship's company. 169.817 Section 169.817 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Operations § 169.817 Master to instruct ship's company. The master shall conduct drills and give instructions as necessary to insure that al...

Infrared ship signature analysis and optimisation

NARCIS (Netherlands)

Neele, F.P.

2005-01-01

The last decade has seen an increase in the awareness of the infrared signature of naval ships. New ship designs show that infrared signature reduction measures are being incorporated, such as exhaust gas cooling systems, relocation of the exhausts and surface cooling systems. Hull and

Merchant shipping (Safety Convention) Act 1977

International Nuclear Information System (INIS)

1977-01-01

When this Act comes into force, it will enable the United Kingdom to ratify and to give effect to the 1974 International Convention for the Safety of Life at Sea (the SOLAS Convention) which replaces the SOLAS Convention of 1960. Under the Act, the Secretary of State may make such rules as he considers appropriate regarding ships provided with nuclear power plants in accordance with Chapter VIII of the Annex to the 1974 Convention and to Recommendations attached to it, dealing with nuclear ships, and insofar as those provisions have not been implemented by the Merchant Shipping Acts 1894 to 1974. (NEA) [fr

Shipping emissions in ports

OpenAIRE

Merk, Olaf

2014-01-01

Shipping emissions in ports are substantial, accounting for 18 million tonnes of CO2 emissions, 0.4 million tonnes of NOx, 0.2 million of SOx and 0.03 million tonnes of PM10 in 2011. Around 85% of emissions come from containerships and tankers. Containerships have short port stays, but high emissions during these stays. Most of CO2 emissions in ports from shipping are in Asia and Europe (58%), but this share is low compared to their share of port calls (70%). European ports have much less emi...

46 CFR 115.910 - Passenger Ship Safety Certificate.

Science.gov (United States)

2010-10-01

...) The route specified on the Certificate of Inspection and the SOLAS Passenger Ship Safety Certificate... 46 Shipping 4 2010-10-01 2010-10-01 false Passenger Ship Safety Certificate. 115.910 Section 115... MORE THAN 150 PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS INSPECTION AND...

Ships going slow in reducing their NOx emissions

NARCIS (Netherlands)

Boersma, K.F.; Vinken, G.C.M.; Tournadre, J.

2015-01-01

Weaddress the lack of temporal information on ship emissions, and report on rapid short-term variations of satellite-derived shipNOx emissions between 2005 and 2012 over European seas. Our inversion is based onOMI observed troposphericNO2 columns and GEOS-Chem simulations. Average European shipNOx

S-CNN-BASED SHIP DETECTION FROM HIGH-RESOLUTION REMOTE SENSING IMAGES

Directory of Open Access Journals (Sweden)

R. Zhang

2016-06-01

Full Text Available Reliable ship detection plays an important role in both military and civil fields. However, it makes the task difficult with high-resolution remote sensing images with complex background and various types of ships with different poses, shapes and scales. Related works mostly used gray and shape features to detect ships, which obtain results with poor robustness and efficiency. To detect ships more automatically and robustly, we propose a novel ship detection method based on the convolutional neural networks (CNNs, called SCNN, fed with specifically designed proposals extracted from the ship model combined with an improved saliency detection method. Firstly we creatively propose two ship models, the “V” ship head model and the “||” ship body one, to localize the ship proposals from the line segments extracted from a test image. Next, for offshore ships with relatively small sizes, which cannot be efficiently picked out by the ship models due to the lack of reliable line segments, we propose an improved saliency detection method to find these proposals. Therefore, these two kinds of ship proposals are fed to the trained CNN for robust and efficient detection. Experimental results on a large amount of representative remote sensing images with different kinds of ships with varied poses, shapes and scales demonstrate the efficiency and robustness of our proposed S-CNN-Based ship detector.

Specialized languages

DEFF Research Database (Denmark)

Mousten, Birthe; Laursen, Anne Lise

2016-01-01

Across different fields of research, one feature is often overlooked: the use of language for specialized purposes (LSP) as a cross-discipline. Mastering cross-disciplinarity is the precondition for communicating detailed results within any field. Researchers in specialized languages work cross...... science fields communicate their findings. With this article, we want to create awareness of the work in this special area of language studies and of the inherent cross-disciplinarity that makes LSP special compared to common-core language. An acknowledgement of the importance of this field both in terms...... of more empirical studies and in terms of a greater application of the results would give language specialists in trade and industry a solid and updated basis for communication and language use....

Ship-Track Models Based on Poisson-Distributed Port-Departure Times

National Research Council Canada - National Science Library

Heitmeyer, Richard

2006-01-01

... of those ships, and their nominal speeds. The probability law assumes that the ship departure times are Poisson-distributed with a time-varying departure rate and that the ship speeds and ship routes are statistically independent...

46 CFR 176.910 - Passenger Ship Safety Certificate.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Passenger Ship Safety Certificate. 176.910 Section 176... 100 GROSS TONS) INSPECTION AND CERTIFICATION International Convention for Safety of Life at Sea, 1974, as Amended (SOLAS) § 176.910 Passenger Ship Safety Certificate. (a) A vessel, which carries more than...

46 CFR 35.01-10 - Shipping papers-TB/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Shipping papers-TB/ALL. 35.01-10 Section 35.01-10... Requirements § 35.01-10 Shipping papers—TB/ALL. Each loaded tank vessel shall have on board a bill of lading... agent of the owner: Provided, however, That in the case of unmanned barges where shipping papers are not...

Near Real Time Ship Detection Experiments

Science.gov (United States)

Brusch, S.; Lehner, S.; Schwarz, E.; Fritz, T.

2010-04-01

A new Near Real Time (NRT) ship detection processor SAINT (SAR AIS Integrated Toolbox) was developed in the framework of the ESA project MARISS. Data are received at DLRs ground segment DLR-BN (Neustrelitz, Germany). Results of the ship detection are available on ftp server within 30 min after the acquisition started. The detectability of ships on Synthetic Aperture Radar (SAR) ERS-2, ENVISAT ASAR and TerraSAR-X (TS-X) images is validated by coastal (live) AIS and space AIS. The monitoring areas chosen for surveillance are the North-, Baltic Sea, and Cape Town. The detectability in respect to environmental parameters like wind field, sea state, currents and changing coastlines due to tidal effects is investigated. In the South Atlantic a tracking experiment of the German research vessel Polarstern has been performed. Issues of piracy in particular in respect to ships hijacked at the Somali coast are discussed. Some examples using high resolution images from TerraSAR-X are given.

Observations and computations of narrow Kelvin ship wakes

Directory of Open Access Journals (Sweden)

Francis Noblesse

2016-01-01

Full Text Available Computations of far-field ship waves, based on linear potential flow theory and the Hogner approximation, are reported for monohull ships and catamarans. Specifically, far-field ship waves are computed for six monohull ships at four Froude numbers F≡V/gL=0.58, 0.68, 0.86, 1.58 and for six catamarans with nondimensional hull spacing s≡S/L=0.25 at two Froude numbers Fs≡V/gS=1 and 2.5. Here, g is the gravitational acceleration, V and L denote the ship speed and length, and S is the separation distance between the twin hulls of a catamaran. The computations show that, although the amplitudes of the waves created by a ship are strongly influenced by the shape of the ship hull, as well known, the ray angles where the largest waves are found are only weakly influenced by the hull shape and indeed are mostly a kinematic feature of the flow around a ship hull. An important practical consequence of this flow feature is that the apparent wake angle of general monohull ships or catamarans (with arbitrarily-shaped hulls can be estimated, without computations, by means of simple analytical relations; these relations, obtained elsewhere via parametric computations, are given here. Moreover, the influence of the two parameters Fs and s that largely determine the ray angles of the dominant waves created by a catamaran is illustrated via computations for three catamarans with hull spacings s=0.2, 0.35, 0.5 at four Froude numbers Fs=1, 1.5, 2, 2.5. These computations confirm that the largest waves created by wide and/or fast catamarans are found at ray angles that only depend on Fs (i.e. that do not depend on the hull spacing s in agreement with an elementary analysis of lateral interference between the dominant waves created by the bows (or sterns of the twin hulls of a catamaran. The dominant-waves ray angles predicted by the theory of wave-interference effects for monohull ships and catamarans are also compared with the observations of narrow Kelvin ship

The activity-based methodology to assess ship emissions - A review

International Nuclear Information System (INIS)

Nunes, R.A.O.; Alvim-Ferraz, M.C.M.; Martins, F.G.; Sousa, S.I.V.

2017-01-01

Several studies tried to estimate atmospheric emissions with origin in the maritime sector, concluding that it contributed to the global anthropogenic emissions through the emission of pollutants that have a strong impact on hu' health and also on climate change. Thus, this paper aimed to review published studies since 2010 that used activity-based methodology to estimate ship emissions, to provide a summary of the available input data. After exclusions, 26 articles were analysed and the main information were scanned and registered, namely technical information about ships, ships activity and movement information, engines, fuels, load and emission factors. The larger part of studies calculating in-port ship emissions concluded that the majority was emitted during hotelling and most of the authors allocating emissions by ship type concluded that containerships were the main pollutant emitters. To obtain technical information about ships the combined use of data from Lloyd's Register of Shipping database with other sources such as port authority's databases, engine manufactures and ship-owners seemed the best approach. The use of AIS data has been growing in recent years and seems to be the best method to report activities and movements of ships. To predict ship powers the Hollenbach (1998) method which estimates propelling power as a function of instantaneous speed based on total resistance and use of load balancing schemes for multi-engine installations seemed to be the best practices for more accurate ship emission estimations. For emission factors improvement, new on-board measurement campaigns or studies should be undertaken. Regardless of the effort that has been performed in the last years to obtain more accurate shipping emission inventories, more precise input data (technical information about ships, engines, load and emission factors) should be obtained to improve the methodology to develop global and universally accepted emission inventories

Crushing of ship bows in head-on collision

DEFF Research Database (Denmark)

Ocakli, H.; Zhang, S.; Pedersen, Preben Terndrup

2004-01-01

Semi-analytical methods for analysis of plate crushing and ship bow damage in head-on collisions are developed in this paper. Existing experimental and theoretical studies for crushing analysis of plated structures are summarized and compared. Simple formulae for determining the crushing force....... The approach developed can be used easily to determine the crushing resistance and damage extent of the ship bow when ship length and collision speed are known. The method can be used in probabilistic analysis of damage extents in ship collisions where a large number of calculations are generally required....

Ship Design and Construction. An Integrated University Course

DEFF Research Database (Denmark)

Andersen, Poul; Jensen, Jørgen Juncher

1996-01-01

This paper describes an integrated course in design and construction of merchant ships taught at the Department of Naval Architecture andOffshore Engineering, the Technical University of Denmark. During the course, the students make a preliminary design of a ship of selected type and also design...... its engine room. The teaching combines lectures with laboratory work at the drawing tables and computer terminals. During the summer holiday, sea time on board ships of the relevant types are offered. Experienced naval architects from shipyards and ship consultancies give lectures and instructions...

Report of the Committee on the Survey of Hull Bottom of Nuclear Ship Mutsu

International Nuclear Information System (INIS)

1979-01-01

The nuclear ship Mutsu arrived the Sasebo Shipyard, Sasebo Heavy Industries Co., Ltd., in October, 1978, to repair the shielding for the reactor and to inspect generally the safety. The docking works were not carried out since 1972 for the Mutsu, therefore it was decided to admit the Mutsu in a dock to put the hull in order. To prepare for starting the output test again, it is necessary to grasp the state of the hull part below water line and take appropriate measures as occasions demand, therefore the Japan Nuclear Ship Development Agency established the Committee on the Survey of Hull Bottom of Nuclear Ship Mutsu in July, 1979. Three meetings of the committee were held from July 2 to September 19, and the draft of the report was drawn up. The Mutsu entered No. 5 dock of the Sasebo Shipyard on July 9, and left on July 23, and the survey of the hull bottom was carried out during that period. The results of the survey are reported as follows: the state of bottom shell plates, the state of aft part and the propeller, the state of sea chests, the state of the electrical corrosion protection of bottom shell plates and the state of sea valves. The problem to be specially mentioned was not found, and it was recognized that the sound maintenance has been carried out. (Kako, I.)

TMI-2 spent fuel shipping

International Nuclear Information System (INIS)

Quinn, G.J.; Burton, H.M.

1985-01-01

TMI-2 failed fuel will be shipped to the Idaho National Engineering Laboratory for use in the DOE Core Examination Program. The fuel debris will be loaded into three types of canisters during defueling and dry loaded into a spent fuel shipping cask. The cask design accommodates seven canisters per cask and has two separate containment vessels with ''leaktight'' seals. Shipments are expectd to begin in early 1986

49 CFR 173.476 - Approval of special form Class 7 (radioactive) materials.

Science.gov (United States)

2010-10-01

... (radioactive) materials must maintain on file for at least one year after the latest shipment, and provide to... evidence based on calculative methods to show that the material is able to pass the tests; or other... shipping papers as “Radioactive Material, Special Form, n.o.s.” [Amdt. 173-244, 60 FR 50307, Sept. 28, 1995...

Towards a different view on ship design : The development of ships observed through a social?technological perspective

NARCIS (Netherlands)

Van Bruinessen, T.M.; Smulders, F.E.H.M.; Hopman, J.J.

2013-01-01

The research this paper reports on aims to develop a design and engineering strategy for complex ships in between incremental and radical innovation. The majority of European ship-design industry concentrates on the development of complex, one-off ‘specials’ for the offshore industry, like dredgers,

New Zealand code for nuclear powered shipping

International Nuclear Information System (INIS)

1976-06-01

This report recommends guidelines for the safety precautions and procedures to be implemented when New Zealand ports and approaches are used by nuclear powered merchant ships and nuclear powered naval ships

FUTURE SHIP ENGINEERS’ TRAINING BY MEANS OF PROFESSIONALLY ORIENTED DISCIPLINES

Directory of Open Access Journals (Sweden)

Уляна Ляшенко

2015-12-01

Full Text Available The article represents the problem of future ship engineers’ training by means of professionally oriented disciplines. This paper focuses on the effectiveness of future specialists’ training in case of implementation the author’s methods in the educational process of teaching (based on competence, person-oriented, module-rating, technological, activity, communicative approaches in accordance with cognitive-enriching, reproductive-activity and professional-creative stages. Leading principles of teaching(scientific approach, systematic and sequence approach, accessibility, conscious approach and activity, connection with life, individual approach and corresponding pedagogical conditions (implementation of holistic integrated approach while teaching professionally oriented disciplines; positive motivation of cadets’ professional interest through the contents, forms and means of educational activity of marine engineers’ professional training are defined; functioning mechanisms of interdisciplinary integration in the process of studying professionally oriented disciplines are disclosed. The author of the article grounds the purposefulness of implementation of the mentioned author’s methods in educational process as it will make the process of ship engineers’ professional training more effective and will allow to use the acquired professional knowledge and in the future professional activity.

Diatom community structure on in-service cruise ship hulls.

Science.gov (United States)

Hunsucker, Kelli Zargiel; Koka, Abhishek; Lund, Geir; Swain, Geoffrey

2014-10-01

Diatoms are an important component of marine biofilms found on ship hulls. However, there are only a few published studies that describe the presence and abundance of diatoms on ships, and none that relate to modern ship hull coatings. This study investigated the diatom community structure on two in-service cruise ships with the same cruise cycles, one coated with an antifouling (AF) system (copper self-polishing copolymer) and the other coated with a silicone fouling-release (FR) system. Biofilm samples were collected during dry docking from representative areas of the ship and these provided information on the horizontal and vertical zonation of the hull, and intact and damaged coating and niche areas. Diatoms from the genera Achnanthes, Amphora and Navicula were the most common, regardless of horizontal ship zonation and coating type. Other genera were abundant, but their presence was more dependent on the ship zonation and coating type. Samples collected from damaged areas of the hull coating had a similar community composition to undamaged areas, but with higher diatom abundance. Diatom fouling on the niche areas differed from that of the surrounding ship hull and paralleled previous studies that investigated differences in diatom community structure on static and dynamically exposed coatings; niche areas were similar to static immersion and the hull to dynamic immersion. Additionally, diatom richness was greater on the ship with the FR coating, including the identification of several new genera to the biofouling literature, viz. Lampriscus and Thalassiophysa. These results are the first to describe diatom community composition on in-service ship hulls coated with a FR system. This class of coatings appears to have a larger diatom community compared to copper-based AF systems, with new diatom genera that have the ability to stick to ship hulls and withstand hydrodynamic forces, thus creating the potential for new problematic species in the biofilm.

Automated-biasing approach to Monte Carlo shipping-cask calculations

International Nuclear Information System (INIS)

Hoffman, T.J.; Tang, J.S.; Parks, C.V.; Childs, R.L.

1982-01-01

Computer Sciences at Oak Ridge National Laboratory, under a contract with the Nuclear Regulatory Commission, has developed the SCALE system for performing standardized criticality, shielding, and heat transfer analyses of nuclear systems. During the early phase of shielding development in SCALE, it was established that Monte Carlo calculations of radiation levels exterior to a spent fuel shipping cask would be extremely expensive. This cost can be substantially reduced by proper biasing of the Monte Carlo histories. The purpose of this study is to develop and test an automated biasing procedure for the MORSE-SGC/S module of the SCALE system

Quantitative analysis method for ship construction quality

Directory of Open Access Journals (Sweden)

FU Senzong

2017-03-01

Full Text Available The excellent performance of a ship is assured by the accurate evaluation of its construction quality. For a long time, research into the construction quality of ships has mainly focused on qualitative analysis due to a shortage of process data, which results from limited samples, varied process types and non-standardized processes. Aiming at predicting and controlling the influence of the construction process on the construction quality of ships, this article proposes a reliability quantitative analysis flow path for the ship construction process and fuzzy calculation method. Based on the process-quality factor model proposed by the Function-Oriented Quality Control (FOQC method, we combine fuzzy mathematics with the expert grading method to deduce formulations calculating the fuzzy process reliability of the ordinal connection model, series connection model and mixed connection model. The quantitative analysis method is applied in analyzing the process reliability of a ship's shaft gear box installation, which proves the applicability and effectiveness of the method. The analysis results can be a useful reference for setting key quality inspection points and optimizing key processes.

Orchestrating Transnational Environmental Governance in Maritime Shipping

DEFF Research Database (Denmark)

Lister, Jane; Taudal Poulsen, René; Ponte, Stefano

2015-01-01

Maritime shipping is the transmission belt of the global economy. It is also a major contributor to global environmental change through its under-regulated air, water and land impacts. It is puzzling that shipping is a lagging sector as it has a well-established global regulatory body—the Interna......Maritime shipping is the transmission belt of the global economy. It is also a major contributor to global environmental change through its under-regulated air, water and land impacts. It is puzzling that shipping is a lagging sector as it has a well-established global regulatory body......—the International Maritime Organization. Drawing on original empirical evidence and archival data, we introduce a four-factor framework to investigate two main questions: why is shipping lagging in its environmental governance; and what is the potential for the International Maritime Organization to orchestrate......, and growing regulatory fragmentation and uncertainty. The paper concludes with pragmatic recommendations for the International Maritime Organization to acknowledge the regulatory difficulties and seize the opportunity to orchestrate environmental progress....

Estimation of shipping emissions in Candarli Gulf, Turkey.

Science.gov (United States)

Deniz, Cengiz; Kilic, Alper; Civkaroglu, Gökhan

2010-12-01

Ships are significant air pollution sources as their high powered main engines often use heavy fuels. The major atmospheric components emitted are nitrogen oxides, particulate matter (PM), sulfur oxide gases, carbon oxides, and toxic air pollutants. Shipping emissions cause severe impacts on health and environment. These effects of emissions are emerged especially in territorial waters, inland seas, canals, straits, bays, and port regions. Candarli Gulf is one of the major industrial regions on the Aegean side of Turkey. The marine environment of the region is affected by emissions from ships calling to ten different ports. In this study, NO( x ), SO(2), CO(2), hydrocarbons (HC), and PM emissions from 7,520 ships are estimated during the year of 2007. These emissions are classified regarding operation modes and types of ships. Annual shipping emissions are estimated as 631.2 t year(-1) for NO(x), 573.6 t year(-1) for SO(2), 33,848.9 t year(-1) for CO(2), 32.3 t year(-1) for HC, and 57.4 t year(-1) for PM.

The world's first supply ship powered by natural gas

International Nuclear Information System (INIS)

2003-01-01

The article describes the newly developed natural gas powered supply ship ''Viking Energy'', which reduces the emission of NOx by 200 tonnes per year. The shipping company has for many years been working on the developing of environmentally friendly ships with less fuel consumption. The gas is stored in liquid form at a temperature of 160 o C. The engines can run on gas or diesel as needed. These dual-fuel engines offers great flexibility, which is very desirable since liquid natural gas is not widely available along the coast. This type of engine has been used in power stations and on offshore platforms, but not in ships. The operating conditions are quite different for ships than for power stations. So far, both investment and operating costs are higher than for conventional ships

Senj’s steam-shipping and socioeconomic circumstances at the turn of the 20th century

Directory of Open Access Journals (Sweden)

Nikola Šimunić

2014-06-01

Full Text Available The authors of the paper examine the historical and geographical aspects of the emergence, development and decline of Senj’s steam-shipping as the crucial element of the overall social and economic progress of Senj at the turn of the 20th century. At the beginning of the 19th century, owing to the special city autonomy and the modern road connections, the Port of Senj was one of the most important maritime trading centres of the Croatian Littoral and the entire Adriatic in general, and its residents were important participants in social, economic and political turmoil of that time. Steam-shipping development has surely provided the residents of Senj a good market position in the times of demanding economic circumstances. The work also analyses important causes of weakening of Senj's economy, which during the period of the Kingdom of Yugoslavia isolated the city from the dominant maritime and economic processes, thus heavily influencing the city's socioeconomic situation.

Mathematical Ship Modeling for Control Applications

DEFF Research Database (Denmark)

Perez, Tristan; Blanke, Mogens

2002-01-01

In this report, we review the models for describing the motion of a ship in four degrees of freedom suitable for control applications. We present the hydrodynamic models of two ships: a container and a multi-role naval vessel. The models are based on experimental results in the four degrees...

Advanced Whale Detection Methods to Improve Whale-Ship Collision Avoidance

Science.gov (United States)

McGillivary, P. A.; Tougher, B.

2010-12-01

Collisions between whales and ships are now estimated to account for fully a third of all whale deaths worldwide. Such collisions can incur costly ship repairs, and may damage or disable ship steering requiring costly response efforts from state and federal agencies. While collisions with rare whale species are problematic in further reducing their low population numbers, collisions with some of the more abundant whale species are also becoming more common as their populations increase. The problem is compounded as ship traffic likewise continues to grow, thus posing a growing risk to both whales and ships. Federal agencies are considering policies to alter shipping lanes to minimize whale-ship collisions off California and elsewhere. Similar efforts have already been undertaken for the Boston Harbor ship approach, where a bend in the shipping lane was introduced to reduce ship traffic through a favorite area of the highly endangered North Atlantic Right Whale. The Boston shipping approach lane was also flanked with a system of moorings with whale detection hydrophones which broadcast the presence of calling whales in or near the ship channel to approaching ships in real time. When so notified, ships can post lookouts to avoid whale collisions, and reduce speed to reduce the likelihood of whale death, which is highly speed dependent. To reduce the likelihood and seriousness of whale-ship collisions off California and Alaska in particular, there is a need to better know areas of particularly high use by whales, and consider implementation of reduced ship speeds in these areas. There is also an ongoing discussion of altering shipping lanes in the Santa Barbara Channel to avoid habitual Blue whales aggregation areas in particular. However, unlike the case for Boston Harbor, notification of ships that whales are nearby to reduce or avoid collisions is complicated because many California and Alaska whale species do not call regularly, and would thus be undetected by

Reliability Based Ship Structural Design

DEFF Research Database (Denmark)

Dogliani, M.; Østergaard, C.; Parmentier, G.

1996-01-01

This paper deals with the development of different methods that allow the reliability-based design of ship structures to be transferred from the area of research to the systematic application in current design. It summarises the achievements of a three-year collaborative research project dealing...... with developments of models of load effects and of structural collapse adopted in reliability formulations which aim at calibrating partial safety factors for ship structural design. New probabilistic models of still-water load effects are developed both for tankers and for containerships. New results are presented...... structure of several tankers and containerships. The results of the reliability analysis were the basis for the definition of a target safety level which was used to asses the partial safety factors suitable for in a new design rules format to be adopted in modern ship structural design. Finally...

47 CFR 80.1099 - Ship sources of energy.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Ship sources of energy. 80.1099 Section 80.1099... Stations § 80.1099 Ship sources of energy. (a) There must be available at all times, while the ship is at... batteries used as part of a reserve source of energy for the radio installations. (b) A reserve source of...

38 CFR 61.0 - Purpose.

Science.gov (United States)

2010-07-01

... PROVIDERS GRANT AND PER DIEM PROGRAM § 61.0 Purpose. This part implements the VA Homeless Providers Grant and Per Diem Program which consists of the following components: capital grants, per diem, special...

Solving the Liner Shipping Fleet Repositioning Problem with Cargo Flows

DEFF Research Database (Denmark)

Tierney, Kevin; Askelsdottir, Björg; Jensen, Rune Møller

2015-01-01

We solve a central problem in the liner shipping industry called the liner shipping fleet repositioning problem (LSFRP). The LSFRP poses a large financial burden on liner shipping firms. During repositioning, vessels are moved between routes in a liner shipping network. Liner carriers wish...

Neutrino physics with SHIP

CERN Document Server

van Herwijnen, Eric

2016-01-01

SHIP is a new general purpose fixed target facility, whose Technical Proposal has been recently reviewed by the CERN SPS Committee. It recommended that the experiment proceed further to a Comprehensive Design phase. In its initial phase, the 400 GeV proton beam extracted from the SPS will be dumped on a heavy target with the aim of integrating 2×1020 POT (Protons On Target) in 5 years. A dedicated detector, based on a long vacuum tank followed by a spectrometer and particle identification detectors, will allow probing a variety of models with light long-lived exotic particles and masses below O(10) GeV/c 2 . The main focus will be the physics of the so-called Hidden Portals. The sensitivity to Heavy Neutrinos will allow to probe for the first time the mass range between the kaon and the charm meson mass, and a range of couplings for which Baryogenesis and active neutrino masses could also be explained. Another dedicated detector will allow the study of neutrino cross-sections and angular distributions. ντ ...

Transport impacts on atmosphere and climate: Shipping

Science.gov (United States)

Eyring, Veronika; Isaksen, Ivar S. A.; Berntsen, Terje; Collins, William J.; Corbett, James J.; Endresen, Oyvind; Grainger, Roy G.; Moldanova, Jana; Schlager, Hans; Stevenson, David S.

2010-12-01

Emissions of exhaust gases and particles from oceangoing ships are a significant and growing contributor to the total emissions from the transportation sector. We present an assessment of the contribution of gaseous and particulate emissions from oceangoing shipping to anthropogenic emissions and air quality. We also assess the degradation in human health and climate change created by these emissions. Regulating ship emissions requires comprehensive knowledge of current fuel consumption and emissions, understanding of their impact on atmospheric composition and climate, and projections of potential future evolutions and mitigation options. Nearly 70% of ship emissions occur within 400 km of coastlines, causing air quality problems through the formation of ground-level ozone, sulphur emissions and particulate matter in coastal areas and harbours with heavy traffic. Furthermore, ozone and aerosol precursor emissions as well as their derivative species from ships may be transported in the atmosphere over several hundreds of kilometres, and thus contribute to air quality problems further inland, even though they are emitted at sea. In addition, ship emissions impact climate. Recent studies indicate that the cooling due to altered clouds far outweighs the warming effects from greenhouse gases such as carbon dioxide (CO 2) or ozone from shipping, overall causing a negative present-day radiative forcing (RF). Current efforts to reduce sulphur and other pollutants from shipping may modify this. However, given the short residence time of sulphate compared to CO 2, the climate response from sulphate is of the order decades while that of CO 2 is centuries. The climatic trade-off between positive and negative radiative forcing is still a topic of scientific research, but from what is currently known, a simple cancellation of global mean forcing components is potentially inappropriate and a more comprehensive assessment metric is required. The CO 2 equivalent emissions using

Contribution of ship traffic to aerosol particle concentrations downwind of a major shipping lane

DEFF Research Database (Denmark)

Kivekäs, N.; Massling, Andreas; Grythe, H.

2014-01-01

at a remote location. We studied the particle number concentration (12 to 490 nm in diameter), the mass concentration (12 to 150 nm in diameter) and number and volume size distribution of aerosol particles in ship plumes for a period of 4.5 months at Hovsore, a coastal site on the western coast of Jutland...... in Denmark. During episodes of western winds, the site is about 50 km downwind of a major shipping lane and the plumes are approximately 1 hour old when they arrive at the site. We have used a sliding percentile-based method for separating the plumes from the measured background values and to calculate...... the ship plume contribution to the total particle number and PM0.15 mass concentration (mass of particles below 150 nm in diameter, converted from volume assuming sphericity) at the site. The method is not limited to particle number or volume concentration, but can also be used for different chemical...

Estimation of waves and ship responses using onboard measurements

DEFF Research Database (Denmark)

Montazeri, Najmeh

This thesis focuses on estimation of waves and ship responses using ship-board measurements. This is useful for development of operational safety and performance efficiency in connection with the broader concept of onboard decision support systems. Estimation of sea state is studied using a set...... of measured ship responses, a parametric description of directional wave spectra (a generalised JONSWAP model) and the transfer functions of the ship responses. The difference between the spectral moments of the measured ship responses and the corresponding theoretically calculated moments formulates a cost...... information. The model is tested on simulated data based on known unimodal and bimodal wave scenarios. The wave parameters in the output are then compared with the true wave parameters. In addition to the numerical experiments, two sets of full-scale measurements from container ships are analysed. Herein...

Black carbon from ships: a review of the effects of ship speed, fuel quality and exhaust gas scrubbing

Directory of Open Access Journals (Sweden)

D. A. Lack

2012-05-01

Full Text Available The International Maritime Organization (IMO has moved to address the health and climate impact of the emissions from the combustion of low-quality residual fuels within the commercial shipping industry. Fuel sulfur content (F_S limits and an efficiency design index for future ships are examples of such IMO actions. The impacts of black carbon (BC emissions from shipping are now under review by the IMO, with a particular focus on the potential impacts of future Arctic shipping.

Recognizing that associating impacts with BC emissions requires both ambient and onboard observations, we provide recommendations for the measurement of BC. We also evaluate current insights regarding the effect of ship speed (engine load, fuel quality and exhaust gas scrubbing on BC emissions from ships. Observations demonstrate that BC emission factors (EF_BC increases 3 to 6 times at very low engine loads (<25% compared to EF_BC at 85–100% load; absolute BC emissions (per nautical mile of travel also increase up to 100% depending on engine load, even with reduced load fuel savings. If fleets were required to operate at lower maximum engine loads, presumably associated with reduced speeds, then engines could be re-tuned, which would reduce BC emissions.

Ships operating in the Arctic are likely running at highly variable engine loads (25–100% depending on ice conditions and ice breaking requirements. The ships operating at low load may be emitting up to 50% more BC than they would at their rated load. Such variable load conditions make it difficult to assess the likely emissions rate of BC.

Current fuel sulfur regulations have the effect of reducing EF_BC by an average of 30% and potentially up to 80% regardless of engine load; a removal rate similar to that of scrubbers.

Uncertainties among current observations demonstrate there is a need for more information on a the impact of fuel quality

49 CFR 172.201 - Preparation and retention of shipping papers.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Preparation and retention of shipping papers. 172..., TRAINING REQUIREMENTS, AND SECURITY PLANS Shipping Papers § 172.201 Preparation and retention of shipping papers. (a) Contents. When a description of hazardous material is required to be included on a shipping...

An Enterprise Model of Rising Ship Costs: Loss of Learning Due to Time between Ships and Labor Force Instability

OpenAIRE

Summerville, Jessica R.; Cullis, Bethia L.; Druker, Eric R.; Rutledge, Gabriel B.; Braxton, Peter J.; Coleman, Richard L.

2007-01-01

Proceedings Paper (for Acquisition Research Program) Since the end of the Cold War, the perceived need for Navy ships has dropped, and so the shipbuilding budget has dropped. Seemingly coincidental with this budgetary pressure, and perversely aggravating the problem, ship costs began to rise steeply. We will set aside that ships have grown in weight by about three percent per year since World War II and that ever-more weapon systems are being put into them, and confine ourselves to discu...

IS INLAND SHIPPING NEEDED IN POLAND?

Directory of Open Access Journals (Sweden)

Ryszard Rolbiecki

2014-06-01

Full Text Available In Poland, inland shipping plays only a mariginal role in transport needs fulfillment. Inland shipping has a share of mere 0,3% in goods transport modal split. The reason for this is poor and variable technical parameters of inland waterways together with adverse legal regulations. Different situation takes place in Western European countries, in which the development of this mode of transport is viewed as a way of road transport develop-ment restraint. In Poland, the need to move some of the volume from road transport to in-land shipping is specifically observed within marine ports surroundings. Because of their complex nature, the investments in inland shipping infrastructure would also be helpful in solving the current problems of water management. Inland waterways in Poland guaran-tee neither an adequate level of flood protection, nor the water needs fulfillment of do-mestic economy. When it comes to water reserves, Poland is one of the most deficient countries in Europe. Thus there is a need to invest in inland waterways in Poland.

32 CFR 700.873 - Inspection incident to commissioning of ships.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Inspection incident to commissioning of ships... Inspection incident to commissioning of ships. When a ship is to be commissioned, the authority designated to place such ship in commission shall, just prior to commissioning, cause an inspection to be made to...

46 CFR 153.12 - IMO Certificates for United States Ships.

Science.gov (United States)

2010-10-01

... 8, or the Officer in Charge, Marine Inspection, issues a United States ship an IMO Certificate... 46 Shipping 5 2010-10-01 2010-10-01 false IMO Certificates for United States Ships. 153.12 Section... CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS General § 153.12...