Evaluation tests of industrial vacuum bearings for space use

Science.gov (United States)

Obara, S.; Sasaki, A.; Haraguchi, M.; Imagawa, K.; Nishimura, M.; Kawashima, N.

2001-09-01

Tribological performance of industrial vacuum bearings was experimentally evaluated for space use. The bearings selected for investigation were an 8 mm bore-sized deep-groove ball bearing lubricated with a sputtered MoS2 film and that lubricated with an ion-plated Ag film, commercially delivered from three Japanese domestic bearing-manufacturers. Based on survey results of tribological requirements for the existing satellite mechanisms, four types of bearing tests were defined and conducted: a vacuum test at room temperature, an atmosphere-resistant test, a thermal vacuum test and a vibration test. In addition to these tests, variation in tribological performance of the industrial bearings was also investigated. The results of more than eighty tests demonstrated that the industrial vacuum bearings had sufficient lubrication lives with low frictional torque and their data were reasonably repeatable, indicating very good potentiality for space use.

Space Transportation and the Computer Industry: Learning from the Past

Science.gov (United States)

Merriam, M. L.; Rasky, D.

2002-01-01

Since the space shuttle began flying in 1981, NASA has made a number of attempts to advance the state of the art in space transportation. In spite of billions of dollars invested, and several concerted attempts, no replacement for the shuttle is expected before 2010. Furthermore, the cost of access to space has dropped very slowly over the last two decades. On the other hand, the same two decades have seen dramatic progress in the computer industry. Computational speeds have increased by about a factor of 1000 and available memory, disk space, and network bandwidth has seen similar increases. At the same time, the cost of computing has dropped by about a factor of 10000. Is the space transportation problem simply harder? Or is there something to be learned from the computer industry? In looking for the answers, this paper reviews the early history of NASA's experience with supercomputers and NASA's visionary course change in supercomputer procurement strategy.

Space power plants and power-consuming industrial systems

International Nuclear Information System (INIS)

Latyshev, L.; Semashko, N.

1996-01-01

An opportunity to create the space power production on the basis of solar, nuclear and fusion energies is analyzed. The priority of solar power production as the most accessible and feasible in comparison with others is emphasized. However, later on, it probably will play an auxiliary role. The possibilities of fusion power production, as a basic one in future, are also considered. It is necessary to create reactors using the fueling cycle with helium-3 (instead of tritium and deuterium, later on). The reaction products--charged particles, mainly--allow one to organize the system of direct fusion energy conversion into electricity. The produced energy is expected not to be transmitted to Earth, but an industry in space is expected to be produced on its basis. The industrial (power and science-consuming) objects located on a whole number of space apparatus will form a single complex with its own basic power plant. The power transmission within the complex will be realized with high power density fluxes of microwave radiation to short distances with their receivers at the objects. The necessary correction of the apparatus positions in the complex will be done with ion and plasma thrusters. The materials present on the Moon, asteroids and on other planets can serve as raw materials for industrial objects. Such an approach will help to improve the ecological state on Earth, to eliminate the necessity in the fast energy consumption growth and to reduce the hazard of global thermal crisis

Components and renewal parts in the nuclear power industry

International Nuclear Information System (INIS)

Clark, T.F. Jr.

1986-01-01

This paper indicates that the nuclear parts industry has been forced to make major investments in time, personnel and financial resources in order to solve short term/emergency procurement problems. What is required, as was previously indicated, is a coordinated industry-wide effort toward long range planning and implementation of a program that addresses these issues. The industry is developing programs directed toward inventory optimization and ''innovative-creative'' financing of manufacturing inventory/work-in-process in an effort to significantly reduce delivery lead times. Product transition, utilization of cancelled plant equipment, equipment qualification programs, and dedication of commercially manufactured/procured parts and components for safety related application continue to be major elements of our program to support current utility requirements

L'espace articulaire de la Robotique Industrielle est un espace vectorielIndustrial Robotics joint space is a vector space

Science.gov (United States)

Tondu, Bertrand

2003-05-01

The mathematical modelling of industrial robots is based on the vectorial nature of the n-dimensional joint space of the robot, defined as a kinematic chain with n degrees of freedom. However, in our opinion, the vectorial nature of the joint space has been insufficiently discussed in the literature. We establish the vectorial nature of the joint space of an industrial robot from the fundamental studies of B. Roth on screws. To cite this article: B. Tondu, C. R. Mecanique 331 (2003).

The part task of the part-spacing paradigm is not a pure measurement of part-based information of faces.

Directory of Open Access Journals (Sweden)

Qi Zhu

Full Text Available BACKGROUND: Faces are arguably one of the most important object categories encountered by human observers, yet they present one of the most difficult challenges to both the human and artificial visual systems. A variety of experimental paradigms have been developed to study how faces are represented and recognized, among which is the part-spacing paradigm. This paradigm is presumed to characterize the processing of both the featural and configural information of faces, and it has become increasingly popular for testing hypotheses on face specificity and in the diagnosis of face perception in cognitive disorders. METHODOLOGY/PRINCIPAL FINDINGS: In two experiments we questioned the validity of the part task of this paradigm by showing that, in this task, measuring pure information about face parts is confounded by the effect of face configuration on the perception of those parts. First, we eliminated or reduced contributions from face configuration by either rearranging face parts into a non-face configuration or by removing the low spatial frequencies of face images. We found that face parts were no longer sensitive to inversion, suggesting that the previously reported inversion effect observed in the part task was due in fact to the presence of face configuration. Second, self-reported prosopagnosic patients who were selectively impaired in the holistic processing of faces failed to detect part changes when face configurations were presented. When face configurations were scrambled, however, their performance was as good as that of normal controls. CONCLUSIONS/SIGNIFICANCE: In sum, consistent evidence from testing both normal and prosopagnosic subjects suggests the part task of the part-spacing paradigm is not an appropriate task for either measuring how face parts alone are processed or for providing a valid contrast to the spacing task. Therefore, conclusions from previous studies using the part-spacing paradigm may need re-evaluation with

Physio-Chemical Analysis of Industrial Effluents in parts of Edo ...

African Journals Online (AJOL)

Physio-Chemical Analysis of Industrial Effluents in parts of Edo States Nigeria. ... Journal of Applied Sciences and Environmental Management ... particularly, surface water results from all activities of man involving indiscriminate waste disposal from industry such as effluents into waterways, waste, agricultural waste, and all ...

Operation of industrial electrical substations. Part II: practical applications

Energy Technology Data Exchange (ETDEWEB)

Sanchez Jimenez, Juan J; Zerquera Izquierdo, Mariano D; Beltran Leon, Jose S; Garcia Martinez, Juan M; Alvarez Urena, Maria V; Meza Diaz, Guillermo [Universidad de Guadalajara (Mexico)]. E-mails: cheosj@yahoo.com; mdzi@hotmail.com; beltran5601@yahoo.com.mx; jmargarmtz@yahoo.com; victory_alvarez@telmexmail.com; depmec@cucei.udg.mx

2013-03-15

The practical application of the methodology explained in Part 1 in a Cuban industry is the principal objective of this paper. The calculus of the economical operation of the principal transformers of the industrial plant is shown of the one very easy form, as well as the determination of the equations of the losses when the transformers operate under a given load diagram. It is calculated the state load which will be passed to the operation in parallel. [Spanish] El objetivo principal de este trabajo es la aplicacion practica de la metodologia, en una industria cubana, que se explico en la Parte 1. El calculo de la operacion economica de los principales transformadores de la planta industrial se muestra de una forma muy facil, asi como la determinacion de las ecuaciones de las perdidas cuando los transformadores operan bajo un diagrama de carga dado. Se calcula la carga de estado que se pasa a la operacion en paralelo.

The economics of bootstrapping space industries - Development of an analytic computer model

Science.gov (United States)

Goldberg, A. H.; Criswell, D. R.

1982-01-01

A simple economic model of 'bootstrapping' industrial growth in space and on the Moon is presented. An initial space manufacturing facility (SMF) is assumed to consume lunar materials to enlarge the productive capacity in space. After reaching a predetermined throughput, the enlarged SMF is devoted to products which generate revenue continuously in proportion to the accumulated output mass (such as space solar power stations). Present discounted value and physical estimates for the general factors of production (transport, capital efficiency, labor, etc.) are combined to explore optimum growth in terms of maximized discounted revenues. It is found that 'bootstrapping' reduces the fractional cost to a space industry of transport off-Earth, permits more efficient use of a given transport fleet. It is concluded that more attention should be given to structuring 'bootstrapping' scenarios in which 'learning while doing' can be more fully incorporated in program analysis.

Model of analyzing and forecasting the dynamics of industrial production and space sector of the Russian Federation

Directory of Open Access Journals (Sweden)

Dmitriy Yu. Ivanov

2016-01-01

Full Text Available Objective to carry out a comparative analysis of the dynamics of industrial production and the rocket and space industry of Russia. Methods an asynchronous method of harmonic analysis comparative method. Results the forecasts of the development of rocket and space industry for 2015 and 2016 are obtained which are compared with the data of the Ministry of Economic Development and the World Bank of Development. The comparison of the results showed that the analysis and forecast data of the Ministry of Economic Development and the World Bank of Development coincide only partially. The tendency to increase the volumes in rocket and space industry is shown. Scientific novelty the mathematical models are presented for the dynamics of industrial production and the rocket and space industry of the Russian Federation built on the basis of the asynchronous harmonic analysis. The retrospective of the rocketspace complex development is considered. Practical significance using the proposed mathematical models of the dynamics of industrial production and the rocket and space industry of the Russian Federation based on the economy cycles the more accurate forecasts of economic development can be made. nbsp

Third Space Weather Summit Held for Industry and Government Agencies

Science.gov (United States)

Intriligator, Devrie S.

2009-12-01

The potential for space weather effects has been increasing significantly in recent years. For instance, in 2008 airlines flew about 8000 transpolar flights, which experience greater exposure to space weather than nontranspolar flights. This is up from 368 transpolar flights in 2000, and the number of such flights is expected to continue to grow. Transpolar flights are just one example of the diverse technologies susceptible to space weather effects identified by the National Research Council's Severe Space Weather Events—Understanding Societal and Economic Impacts: A Workshop Report (2008). To discuss issues related to the increasing need for reliable space weather information, experts from industry and government agencies met at the third summit of the Commercial Space Weather Interest Group (CSWIG) and the National Oceanic and Atmospheric Administration's (NOAA) Space Weather Prediction Center (SWPC), held 30 April 2009 during Space Weather Week (SWW), in Boulder, Colo.

Electric utility strategies and the emerging industry structure - Part 1

International Nuclear Information System (INIS)

Motupalli, S.

1991-01-01

The electric utility industry is our most capital intensive industry by far. Over the past few decades, socioeconomic and technological forces have been quietly revolutionizing the way the industry conducts itself. During the 1980s, these changes have been particularly intense, often catching both regulators and regulated ill-prepared to develop effective and profitable strategies to deal with such change. Much has already been written about these changes: independent power producers, competitive procurement of resources, incentive-based regulation, the benefits of affiliated company structures, mergers and consolidation, customer energy conservation, and marketing strategy development are all currently highly popular article and seminar topics. The author's object in this two-part series is to facilitate development of a decision framework to put these various changes in perspective, to help develop effective strategies through better focused and equipped planning methodologies. Gaining an understanding of the role, strengths and weaknesses of the various players in an industry and the structural constraints in which they operate is a necessary precursor to developing effective operating strategies to deal with change or to manipulate industry forces in your favor. Michael Port's popular five forces model provides a convenient way to develop such an understanding. It provides a way to map the industry forces driving profitability, through a review of the strengths, weaknesses and leverage of: current industry players, suppliers to the industry, customers for the industry's product, new entrants into the market, and substitute products providing equal or better value. Part 1 of this series reviews each of these five forces along some key dimensions to determine their direction of change or influence, and whether this change impacts a utility's competitive position favorably or unfavorably

Suborbital industry at the edge of space

CERN Document Server

Seedhouse, Erik

2014-01-01

Until recently, spaceflight has been the providence of a select corps of astronauts whose missions, in common with all remarkable exploits, were experienced vicariously by the rest of the world via television reports and Internet feeds. These spacefarers risked their lives in the name of science, exploration and adventure, thanks to government-funded manned spaceflight programs. All that is about to change The nascent commercial suborbital spaceflight industry will soon open the space frontier to commercial astronauts, payload specialists and, of course, spaceflight participants. Suborbital explains the tantalizing science opportunities offered when suborbital trips become routine and describes the difference in training and qualification necessary to become either a spaceflight participant or a fully fledged commercial suborbital astronaut. Suborbital also explains how the commercial suborbital spaceflight industry is planning and preparing for the challenges of marketing the hiring of astronauts. It examine...

INVESTIGATION OF MARKETING TECHNOLOGIES IN THE INNOVATION PROCESS OF ROCKET AND SPACE INDUSTRY

Directory of Open Access Journals (Sweden)

K. B. Dobrova

2016-01-01

Full Text Available In this article we have studied the use of marketing technologies in the innovation process of enterprises of rocket and space industry. The present study specifies the relevance of chosen research topic, as well as the essence of marketing innovations at the enterprises of rocket and space industry, the structuring of marketing and management processes in the innovation process. There are provided the most common analytical instruments in the marketing and there is marked the importance of use of a global strategy for the enterprises of rocket and space industry. The article also specifies a clear example of application of marketing technologies in the innovation process of the Federal State Unitary Enterprise "State Space Research and Production Center named after Khrunichev M.V'.'. At the beginning the role and place of innovation management and innovation process in the strategic management of the FSUE "SSRPC named after Khrunichev M.V." are shown. Then there are described the basic marketing methods of program-oriented management of the innovation process in the FSUE "SSRPC named after Khrunichev M.V"" and there is highlighted the innovation marketing strategy of the FSUE "SSRPC named after Khrunichev M.V.". There are presented the distinctive features of the competitive strategy of the company of the rocket and space industry and the features of formation (development of the innovative enterprise development strategy based on marketing innovation in the FSUE "SSRPC named after Khrunichev M.V.". The conclusion includes the main findings of the study conducted.

Computed tomography as a tool for tolerance verification of industrial parts

DEFF Research Database (Denmark)

Müller, Pavel; Cantatore, Angela; Andreasen, J.L.

2013-01-01

Computed tomography (CT) is becoming an important technology for industrial applications, enabling fast and accurate control of manufactured parts. In only a few minutes, a complete 3D model of a part may be obtained, allowing measurements of external and internal features. This paper presents...

Design and control considerations for industrial and space manipulators

Science.gov (United States)

Whitney, D. E.; Book, W. J.; Lynch, P. M.

1974-01-01

This paper is a progress report summarizing theoretical and practical results concerning integration of design and control aspects of manipulator arms for industrial or space applications. The relationships between task specifications, gross motions, fine motions, actuator type and location, size and strength of structural members, control servos and strategies, and overall design evaluation are briefly discussed, with some technical examples.

Planetary Space Weather Service: Part of the the Europlanet 2020 Research Infrastructure

Science.gov (United States)

Grande, Manuel; Andre, Nicolas

2016-07-01

Over the next four years the Europlanet 2020 Research Infrastructure will set up an entirely new European Planetary Space Weather service (PSWS). Europlanet RI is a part of of Horizon 2020 (EPN2020-RI, http://www.europlanet-2020-ri.eu). The Virtual Access Service, WP5 VA1 "Planetary Space Weather Services" will extend the concepts of space weather and space situational awareness to other planets in our Solar System and in particular to spacecraft that voyage through it. VA1 will make five entirely new 'toolkits' accessible to the research community and to industrial partners planning for space missions: a general planetary space weather toolkit, as well as three toolkits dedicated to the following key planetary environments: Mars (in support ExoMars), comets (building on the expected success of the ESA Rosetta mission), and outer planets (in preparation for the ESA JUICE mission to be launched in 2022). This will give the European planetary science community new methods, interfaces, functionalities and/or plugins dedicated to planetary space weather in the tools and models available within the partner institutes. It will also create a novel event-diary toolkit aiming at predicting and detecting planetary events like meteor showers and impacts. A variety of tools (in the form of web applications, standalone software, or numerical models in various degrees of implementation) are available for tracing propagation of planetary and/or solar events through the Solar System and modelling the response of the planetary environment (surfaces, atmospheres, ionospheres, and magnetospheres) to those events. But these tools were not originally designed for planetary event prediction and space weather applications. So WP10 JRA4 "Planetary Space Weather Services" (PSWS) will provide the additional research and tailoring required to apply them for these purposes. The overall objectives of this Joint Research Aactivities will be to review, test, improve and adapt methods and tools

Industry Wage Surveys: Banking and Life Insurance, December 1976. Part I--Banking. Part II--Life Insurance. Bulletin 1988.

Science.gov (United States)

Barsky, Carl

This report presents the results of a survey conducted by the Bureau of Labor Statistics to determine wages and related benefits in (1) the banking industry and (2) for employees in home offices and regional head offices of life insurance carriers. Part 1 discusses banking industry characteristics and presents data for tellers and selected…

Wind energy development as a part of Poland's industrial development

DEFF Research Database (Denmark)

Stoerring, Dagmara; Hvelplund, Frede Kloster

2003-01-01

The paper concludes with recommendations on how to make wind energy development a part of the industrial development in Poland by introducing renewable energy support mechanisms to improve the conditions for companies to develop wind technology in Poland....

Industrial dual arm robot manipulator for precise assembly of mechanical parts

Science.gov (United States)

Park, Chanhun; Kim, Doohyung; Park, Kyoungtaik; Choi, Youngjin

2007-12-01

A new structure of dual arm robot manipulator which consists of two industrial 6-DOF arms and one 2-DOF Torso is introduced. Each industrial 6-DOF arm is able to be used as a stand-alone industrial 6-DOF robot manipulator and as a part of dual arm manipulator at the same time. These structures help the robot maker which is willing to succeed in the emerging dual arm robot market in order to have high competition for the current industrial robot market at same time. Self-collision detection algorithm for multi-arm robot and kinematics algorithms for the developed dual arm robot manipulator which are implemented in our controller are introduced.

Skill Formation in Malaysia: The Case of Auto Parts Industry

OpenAIRE

Sadoi, Yuri

1998-01-01

This study takes the auto parts industry in Malaysia to demonstrate the difficulties a developing country faces in promoting skill development. Auto parts production needs a wide range of production techniques, which in turn require many types and levels of skilled workers. Realizing the importance of skilled workers, the Malaysian government has been emphasizing skill formation by increasing the number of technical schools, introducing a skill certification system, and giving a tax incentive...

The space shuttle program from challenge to achievement: Space exploration rolling on tires

Science.gov (United States)

Felder, G. L.

1985-01-01

The Space Shuttle Transportation System is the first space program to employ the pneumatic tire as a part of space exploration. For aircraft tires, this program establishes new expectations as to what constitutes acceptable performance within a set of tough environmental and operational conditions. Tire design, stresses the usual low weight, high load, high speed, and excellent air retention features but at extremes well outside industry standards. Tires will continue to be an integral part of the Shuttle's landing phase in the immediate future since they afford a unique combination of directional control, braking traction, flotation and shock absorption not available by other systems.

Process Integration Design Methods for Water Conservation and Wastewater Reduction in Industry. Part 3: Experience of Industrial Application

DEFF Research Database (Denmark)

Wenzel, Henrik; Dunn, Russell; Gottrup, Lene

2002-01-01

This paper is Part 3 in a three part series of papers addressing operational techniques for applying mass integration principles to design in industry with special focus on water conservation and wastewater reduction. The presented techniques derive from merging US and Danish experience with indu......This paper is Part 3 in a three part series of papers addressing operational techniques for applying mass integration principles to design in industry with special focus on water conservation and wastewater reduction. The presented techniques derive from merging US and Danish experience......’s experience with defining the scope of the system and with identifying water flow constraints and water quality constraints is discussed. It is shown, how physical constraints for the system design often set a limit for the sophistication of the water recycle network and thereby also a limit for how...... sophisticated the method for system design should be. Finally, pinch analysis and system designs for water recycling in a practical case study are shown, documenting large water saving potentials and achievements....

Implementing CDIO Approach in preparing engineers for Space Industry

Directory of Open Access Journals (Sweden)

Daneykin Yury

2017-01-01

Full Text Available The necessity to train highly qualified specialists leads to the development of the trajectory that can allow training specialists for the space industry. Several steps have been undertaken to reach this purpose. First, the University founded the Space Instrument Design Center that promotes a wide range of initiatives in the sphere of educating specialists, retraining specialists, carrying out research and collaborating with profiled enterprises. The University introduced Elite Engineering Education system to attract talented specialist and help them to follow individual trajectory to train unique specialist. The paper discusses the targets necessary for achievement to train specialists. Moreover, the paper presents the compliance of the attempts with the CDIO Approach, which is widely used in leading universities to improve engineering programs.

Optical interferometry for measurement of the geometric dimensions of industrial parts

International Nuclear Information System (INIS)

Groot, Peter de; Biegen, Jim; Clark, Jack; Lega, Xavier Colonna de; Grigg, David

2002-01-01

We describe an instrument for the measurement of surface flatness, parallelism, and size (thickness) of plane-parallel parts in a single measurement to 1σ gauge capability of 0.02, 0.03, and 0.06 μm, respectively. A low-coherence IR profiler viewing both sides of the part simultaneously, believed to be novel, accommodates a wide variety of industrial surface finishes, including machined, ground, or lapped parts, with a 75-mm field of view and 15,000 pixels per side. A heterodyne laser displacement gauge together with an integrated zeroing system allows for a range of part sizes from 0 to 100 mm

National Space Agencies vs. Commercial Space: Towards Improved Space Safety

Science.gov (United States)

Pelton, J.

2013-09-01

assume that thiscondition will not change. This seems particularly true for high profile, multi-billion dollar programs.The second part of the paper focuses on new commercial space programs that appear to be undertaken in a less restrictive manner; i.e. outside the constraints of politically-driven national space policies. Here the drivers—even within international consortia—seem to be on reliable performance and commercial return. Since sustained accident-free performance is critical to commercial programs very existence and profitability, the inherent role of safety in commercial space industry would seem clear. The question of prime interest for this paper is whether or not it might be possible for smaller and more focused commercial space entities, free from the constraints of space agency organizational and political constraints, to be more "risk adverse" and thus be more nimble in designing "safe" vehicles? If so how can this "safety first" corporate philosophy and management practice be detected and even objectively measured? Could, in the future, risk reduction at the level of design, quality verification, etc., be objectively measured?

Reproduction in the space environment: Part I. Animal reproductive studies

Science.gov (United States)

Santy, P. A.; Jennings, R. T.; Craigie, D.

1990-01-01

Mankind's exploration and colonization of the frontier of space will ultimately depend on men's and women's ability to live, work, and reproduce in the space environment. This paper reviews animal studies, from microorganisms to mammals, done in space or under space-simulated conditions, which identify some of the key areas which might interfere with human reproductive physiology and/or embryonic development. Those space environmental factors which impacted almost all species included: microgravity, artificial gravity, radiation, and closed life support systems. These factors may act independently and in combination to produce their effects. To date, there have been no studies which have looked at the entire process of reproduction in any animal species. This type of investigation will be critical in understanding and preventing the problems which will affect human reproduction. Part II will discuss these problems directly as they relate to human physiology.

Space Industry. Industry Study, Spring 2009

Science.gov (United States)

2009-01-01

Space Flight Center, Cocoa Beach, FL Cape Canaveral Air Force Station, Cocoa Beach, FL Naval Ordnance Test Unit, Cocoa Beach, FL 50th Space Wing... America .” In 2009, as we celebrate the 40th anniversary of the fulfillment of that vision, it is appropriate to pause and reflect on how far we...value system, providing high-value services to both government and commercial consumers. The estimate of international and U.S. government consumption

Application of artificial intelligence (AI) concepts to the development of space flight parts approval model

Science.gov (United States)

Krishnan, Govindarajapuram Subramaniam

1997-12-01

The National Aeronautics & Space Administration (NASA), the European Space Agency (ESA), and the Canadian Space Agency (CSA) missions involve the performance of scientific experiments in Space. Instruments used in such experiments are fabricated using electronic parts such as microcircuits, inductors, capacitors, diodes, transistors, etc. For instruments to perform reliably the selection of commercial parts must be monitored and strictly controlled. The process used to achieve this goal is by a manual review and approval of every part used to build the instrument. The present system to select and approve parts for space applications is manual, inefficient, inconsistent, slow and tedious, and very costly. In this dissertation a computer based decision support model is developed for implementing this process using artificial intelligence concepts based on the current information (expert sources). Such a model would result in a greater consistency, accuracy, and timeliness of evaluation. This study presents the methodology of development and features of the model, and the analysis of the data pertaining to the performance of the model in the field. The model was evaluated for three different part types by experts from three different space agencies. The results show that the model was more consistent than the manual evaluation for all part types considered. The study concludes with the cost and benefits analysis of implementing the models and shows that implementation of the model will result in significant cost savings. Other implementation details are highlighted.

Space and Missile Systems Center Standard: Parts, Materials, and Processes Control Program for Space Vehicles

Science.gov (United States)

2013-04-12

preparation , implementation, and operation of a Parts, Materials, and Processes (PMP) control program for use during the design, development...Processes List CDR Critical Design Review CDRL Contract Data Requirements List CMOS Complementary Metal Oxide Semiconductor CONOPS Concept of Operations...Failure Review Board GFE Government Furnished Equipment GIDEP Government Industry Data Exchange Program HBT Heterojunction Bipolar Transistor IPT

Benefits Awareness: Educating Industry, Finance, and the Public About Space Commercialization

Science.gov (United States)

Powers, Blake; Nall, Mark; Casas, Joseph C.; Henderson, Robin N. (Technical Monitor)

2002-01-01

For space to be truly commercialized, businesses of all sizes and types must be involved, from foundries to agricultural research initiatives. Achieving this goal, however, requires three separate but integrated educational efforts to support it. The first is to educate industry leaders about the possibilities available through such research, while dispelling some of the myths and misinformation educate the financial community about the economic benefits that result both from the research and the leveraging of private research dollars through the use of space and microgravity research. The third is to educate the public about the tangible benefits that come directly to them from such efforts, the economic benefits to national economies from same, and the other less tangible benefits that will cascade from commercial operations. Together, these steps will educate and provide the framework necessary to help advance space commercialization.

Adaptive governance to promote ecosystem services in urban green spaces

Science.gov (United States)

Managing urban green space as part of an ongoing social-ecological transformationposes novel governance issues, particularly in post-industrial settings. Urban green spaces operate as small-scale nodes in larger networks of ecological reserves that provide and maintain key ecosys...

Space-Derived Imagery and a Commercial Remote Sensing Industry: Impossible Dream or Inevitable Reality?

Science.gov (United States)

Murray, Felsher

Landsat-1 was launched in 1972 as a research satellite. Many of us viewed this satellite as a precursor to remote sensing "commercialization." Indeed since that time, the birth, growth and maturation of a remote sensing "industry" has been an ongoing objective for much of the U.S. private sector engaged in space and ground-segment activities related to the acquisition, analysis, and dissemination of imagery. In September 1999 a U.S. commercial entity, Space Imaging, Inc. launched its 1-meter pan/4-meter multispectral IKONOS sensor. DigitalGlobe, Inc. (nee EarthWatch, Inc.) matched this feat in October 2001. Thus, a full 30 years later, we are finally on the brink of building a true remote sensing information industry based on the global availability of competitively-priced space- derived imagery of the Earth. The upcoming availability of similar imagery from non-U.S. sources as ImageSat and U.S. sources as ORBIMAGE will only strengthen that reality. However, a remote sensing industry can only grow by allowing these entities (in times of peace) unencumbered access to a world market. And that market continues to expand -- up 11% in 2001, with gross revenues of U.S. commercial remote sensing firms alone reaching 2.44 billion, according to a joint NASA/ASPRS industry survey. However, the 30-year gap between the research-labeled Landsat-1 and our current commercial successes was not technology-driven. That lacuna was purely political -- driven by valid concerns related to national security. Although the world's governments have cooperated thoroughly and completely in areas related to satellite telecommunications, cooperation in space-derived image information is still today done cautiously and on a case-by-case basis -- and then only for science- based undertakings. It is still a fact that, except for the United States, all other Earth-imaging satellites/sensors flying today are owned, operated, and their products disseminated, by national governments -- and not private

Portable Diagnostics Technology Assessment for Space Missions. Part 2; Market Survey

Science.gov (United States)

Nelson, Emily S.; Chait, Arnon

2010-01-01

A mission to Mars of several years duration requires more demanding standards for all onboard instruments than a 6-month mission to the Moon or the International Space Station. In Part 1, we evaluated generic technologies and suitability to NASA needs. This prior work considered crew safety, device maturity and flightworthiness, resource consumption, and medical value. In Part 2, we continue the study by assessing the current marketplace for reliable Point-of-Care diagnostics. The ultimate goal of this project is to provide a set of objective analytical tools to suggest efficient strategies for reaching specific medical targets for any given space mission as program needs, technological development, and scientific understanding evolve.

STERN-Educational Benefits for the Space Industry

Science.gov (United States)

Schuttauf, K.; Stamminger, A.; Lappohn, K.; Ciezki, H.; Kitsche, W.

2015-09-01

several reviews in which they have to present and defend their rocket design in front of experts. This practically oriented study should prepare the students for life in industry. The DLR Mobile Rocket Base (MORABA) and the DLR Institute of Space Propulsion as well as the DLR Space Administration, accompany the students during the reviews and until launch. MORABA has five decades of experience in launching sounding rockets and the Space Propulsion Institute in testing of and research in rocket engines. The reviews as well as special workshops (organized by DLR MORABA and the DLR Institute of Space Propulsion), offer a platform for exchange of technical information. The STERN project provides an opportunity to train the next generation of aerospace engineers.

Fundamental Problems in the Operation of the Automotive Parts Industry Small and Medium Businesses in Bangkok and Surrounding Provinces

OpenAIRE

P. Thepnarintra

2015-01-01

The purposes of this study were to: 1) investigate operation conditions of SME automotive part industry in Bangkok and vicinity and 2) to compare operation problem levels of SME automotive part industry in Bangkok and vicinity according to the sizes of the enterprises. Samples in this study included 196 entrepreneurs of SME automotive part industry in Bangkok and vicinity derived from simple random sampling and calculation from R. V. Krejcie and D. W. Morgan's tables. Res...

Reproduction in the space environment: Part II. Concerns for human reproduction

Science.gov (United States)

Jennings, R. T.; Santy, P. A.

1990-01-01

Long-duration space flight and eventual colonization of our solar system will require successful control of reproductive function and a thorough understanding of factors unique to space flight and their impact on gynecologic and obstetric parameters. Part II of this paper examines the specific environmental factors associated with space flight and the implications for human reproduction. Space environmental hazards discussed include radiation, alteration in atmospheric pressure and breathing gas partial pressures, prolonged toxicological exposure, and microgravity. The effects of countermeasures necessary to reduce cardiovascular deconditioning, calcium loss, muscle wasting, and neurovestibular problems are also considered. In addition, the impact of microgravity on male fertility and gamete quality is explored. Due to current constraints, human pregnancy is now contraindicated for space flight. However, a program to explore effective countermeasures to current constraints and develop the required health care delivery capability for extended-duration space flight is suggested. A program of Earth- and space-based research to provide further answers to reproductive questions is suggested.

Commercial Lunar ISRU for the Space Launch Industry: Cruder is Better

Science.gov (United States)

Turner, M.

2017-09-01

Lunar ISRU scenarios typically focus on making relatively high-added-value products (such as solar PVs) for off-Earth use only. Discussion of space mining in general focuses on high-value trace substances (e.g. platinum group metals) as exports to Earth, and hydroxyls and other volatiles for use only in space. This paper considers two potential bulk commodities with high availability on the lunar surface: space-weathered basalt fines and the oxygen in metal oxides. Basalt fiber can be produced by a simple process, and is strong enough that a tapered rotating sling could propel payloads at lunar escape velocity. Basalt aerobrakes could be flung to LEO depots to aid in aerocapture, reentry, and thermal protection of upper stages. Lunar oxygen (O2 being most of the mass of most liquid-fueled rockets) could aid in powered descent. In short, abundant substances on the Moon could make cost-saving exports possible sooner than later, for the satellite launch industry.

The International Space University

Science.gov (United States)

Davidian, Kenneth J.

1990-01-01

The International Space University (ISU) was founded on the premise that any major space program in the future would require international cooperation as a necessary first step toward its successful completion. ISU is devoted to being a leading center for educating future authorities in the world space industry. ISU's background, goals, current form, and future plans are described. The results and benefits of the type of education and experience gained from ISU include technical reports describing the design projects undertaken by the students, an exposure to the many different disciplines which are a part of a large space project, an awareness of the existing activities from around the world in the space community, and an international professional network which spans all aspects of space activities and covers the globe.

Spring 2004 Industry Study: Space Industry

National Research Council Canada - National Science Library

Romano, Anthony F; Brandt, Linda S; Burns, Cynthia Q; Grubbs, Lawrence K; McGee, Anne E; Barzler, Paul M; Bennett, Kathleen R; Bryner, Drew A; Clubb, Timothy L; Flynn, John E

2004-01-01

.... These challenges include the complex technologies necessary to safely travel the hazardous environment and great distances of space, as well as the public will and commitment of resources required...

A method for the electrolytic coating of uranium or uranium alloy parts, and parts thus obtained

International Nuclear Information System (INIS)

1973-01-01

A method, preceded by a surface treatment, for applying an electrolytic coating (e.g. of nickel) on uranium, or uranium alloy parts. This method is characterized in that the previous surface treatment comprises a chemical removal of grease in halogenated solvent bath (free from halogen ions) and an anodic scouring in a buffered aqueous solution solution of an acid free from halogen ions. The coating can be applied to fuel elements for nuclear industry, counter-weight for aeronautics and space industries and to radiation shields [fr

Initiatives to Improve Quality of Additively Manufactured Parts

Science.gov (United States)

Waller, Jess; Nichols, Charles

2017-01-01

NASA is providing leadership in an international effort linking government and industry resources to speed adoption of additive manufactured (AM) parts. Participants include government agencies (NASA, USAF, NIST, FAA), industry (commercial aerospace, NDE manufacturers, AM equipment manufacturers), standards organizations and academia. NASA is also partnering with its international space exploration organizations such as ESA and JAXA. NDT is identified as a universal need for all aspects of additive manufacturing.

The Space Industry

National Research Council Canada - National Science Library

Borrelli, Carmine; Buckon, Danielle; Cogossi, Bruce; Davidson, Cynthia; Ditzler-Smith, Cristie; Doddato, August; Gabrielson, Charles; Hubbard, Kenneth; Jacocks, Kent; Jircitano, Valerie

2007-01-01

.... To ensure these, U.S. policy should encourage more commercial activity in space, emphasize a more globally cooperative environment, change acquisition methods to emphasize cost control over performance at any cost...

Industrializing the near-earth asteroids: Speculations on human activities in space in the latter half of the 21st century

Science.gov (United States)

Sercel, Joel C.

1990-01-01

The use of solar system resources for human industry can be viewed as a natural extension of the continual growth of our species' habitat. Motivations for human activities in space can be discussed in terms of five distinct areas: (1) information processing and collection; (2) materials processing; (3) energy production to meet terrestrial power needs; (4) the use of extraterrestrial materials; and (5) disaster avoidance. When considering 21st-Century activities in space, each of these basic motivations must be treated in light of issues likely to be relevant to the 21st-Century earth. Many of the problems facing 21st-Century earth may stem from the need to maintain the world population of 8 to 10 billion people as is projected from expected growth rates. These problems are likely to include managing the impact of industrial processes on the terrestrial biosphere while providing adequate energy production and material goods for the growing population. The most important human activities in space in the latter half of the 21st Century may be associated with harnessing the resources of the near-earth asteroids for industrial processes. These above topics are discussed with an emphasis on space industrialization.

Industrial chemistry engineering

International Nuclear Information System (INIS)

1993-01-01

This book on industrial chemistry engineering is divided in two parts. The first part deals with industrial chemistry, inorganic industrial chemistry, organic industrial chemistry, analytical chemistry and practical questions. The last parts explain the chemical industry, a unit parts and thermodynamics in chemical industry and reference. It reveals the test subjects for the industrial chemistry engineering with a written examination and practical skill.

78 FR 32241 - U.S. Air Force Seeks Industry Input for National Security Space Launch Assessment

Science.gov (United States)

2013-05-29

..., seeks industry views and perspectives to inform an on-going strategic National Security Space Launch... the U.S. Government. 2. What are the critical issues that concern current and prospective launch...

SIMULATION AS PART OF INDUSTRIAL PRACTICE

Directory of Open Access Journals (Sweden)

Miriam Pekarčíková

2015-06-01

Full Text Available Article discusses the simulation as an efficient scientific method of problem solving in industrial practice. It creates an overview of the simulation program means used in industrial practice and creates an overview of tools for discrete, continuous, and combined.

Simulation of obstacles’ effect on industrial robots’ working space using genetic algorithm

Directory of Open Access Journals (Sweden)

M.F. Aly

2014-07-01

Full Text Available The study of robot workspace is an interesting problem since its applications are directly related to industry. However, it involves several mathematical complications; Thus, many of the arising questions are left without a definite answer. With the motivation of industrial demand, the need for finding better answers than the existing ones lasts. The workspace (WS determination of a robot with general structural parameters is a complex problem, which cannot be solved in an explicit way. Closed form solutions are only available in some particular cases. Otherwise, computational algorithms and numerical techniques are used. The task becomes even much more complicated by the presence of obstacles in the robot accessible region. Obstacle presence does not only exclude points from the original WS but it affects the whole robot workspace’s shape and size to the extent that it sometimes divides the working space in two or more separate regions that cannot be linked by the same robot. Much research work in the literature is directed toward path planning in the presence of obstacles without having to determine the robot WS. However, a real situation in industry occurs when the knowledge of the WS is of importance in facility layout. This paper presents an approach for the estimation of a generic open-chain robot in the presence of obstacles with any desired number of prismatic and/or revolute joints of any order. Joints’ axes may have any orientation relative to each other. The robot can be placed in free space or in a work cell consisting of a set of Computer Numerically Controlled (CNC machines and some obstacles.

Providing Public Space Continuities in Post-Industrial Areas through Remodelling Land/Water Connections

Science.gov (United States)

Burda, Izabela M.; Nyka, Lucyna

2017-10-01

This article examines the problem of urban transformation strategies applied in recent years which are based on the creation of new water areas and modification of existing ones. The research is an attempt to prove that modifications of plans of water areas and forms of their borders may play an important role in achieving the best quality public spaces in post-industrial territories. The basis for demonstrating the importance of modifying water borders, and introducing new forms of water-based structures in cities, are theoretical surveys, comparative studies and in-field analyses. It can be seen that post-industrial areas, which used to create voids in the urban fabric, can be perceived as unique but isolated places that should be integrated into the layout of cities. Thus, creating continuity of public spaces that will relate converted areas to their surroundings is a well-known objective of many transformation strategies. This research proves that an effective strategy toward achieving this goal can be based on the modification of relationships between land and water. Namely, the introduction of new water areas, designing new pieces of land that protrude into the water, softening the boundaries of water lines or the opposite, like structuring smaller water flows into well-defined canals, may significantly contribute to the quality of public spaces. As such, all of this fosters the development of sustainable cities and contributes significantly to the emergence of high-quality urban landscapes.

Second Generation Reusable Launch Vehicle Development and Global Competitiveness of US Space Transportation Industry: Critical Success Factors Assessment

Science.gov (United States)

Enyinda, Chris I.

2002-01-01

In response to the unrelenting call in both public and private sectors fora to reduce the high cost associated with space transportation, many innovative partially or fully RLV (Reusable Launch Vehicles) designs (X-34-37) were initiated. This call is directed at all levels of space missions including scientific, military, and commercial and all aspects of the missions such as nonrecurring development, manufacture, launch, and operations. According to Wertz, tbr over thirty years, the cost of space access has remained exceedingly high. The consensus in the popular press is that to decrease the current astronomical cost of access to space, more safer, reliable, and economically viable second generation RLVs (SGRLV) must be developed. Countries such as Brazil, India, Japan, and Israel are now gearing up to enter the global launch market with their own commercial space launch vehicles. NASA and the US space launch industry cannot afford to lag behind. Developing SGRLVs will immeasurably improve the US's space transportation capabilities by helping the US to regain the global commercial space markets while supporting the transportation capabilities of NASA's space missions, Developing the SGRLVs will provide affordable commercial space transportation that will assure the competitiveness of the US commercial space transportation industry in the 21st century. Commercial space launch systems are having difficulty obtaining financing because of the high cost and risk involved. Access to key financial markets is necessary for commercial space ventures. However, public sector programs in the form of tax incentives and credits, as well as loan guarantees are not yet available. The purpose of this paper is to stimulate discussion and assess the critical success factors germane for RLVs development and US global competitiveness.

Rancang bantun industri kecil suku cadang / komponen kulit teknis untuk industri tekstil

OpenAIRE

Suliestiyah Wiryodiningrat; Dwi Asdono Basuki

1995-01-01

The objective of this research is to find out proses of production and relation between cost, Selling price anda break even point (BEP). Product specification is space parts for Textile industries i.e.Picker, Buffer, Bumper leather, Sweel leather, Box front leather, Stick Bumper and Tension brake leather. The production capacity is 700 units per-day, so that in one year is 210.000 units. The economical analysis showed that Total Captal (fixed capital and working capital) =Rp. 149.189.750.00. ...

Space development and space science together, an historic opportunity

Science.gov (United States)

Metzger, P. T.

2016-11-01

The national space programs have an historic opportunity to help solve the global-scale economic and environmental problems of Earth while becoming more effective at science through the use of space resources. Space programs will be more cost-effective when they work to establish a supply chain in space, mining and manufacturing then replicating the assets of the supply chain so it grows to larger capacity. This has become achievable because of advances in robotics and artificial intelligence. It is roughly estimated that developing a lunar outpost that relies upon and also develops the supply chain will cost about 1/3 or less of the existing annual budgets of the national space programs. It will require a sustained commitment of several decades to complete, during which time science and exploration become increasingly effective. At the end, this space industry will capable of addressing global-scale challenges including limited resources, clean energy, economic development, and preservation of the environment. Other potential solutions, including nuclear fusion and terrestrial renewable energy sources, do not address the root problem of our limited globe and there are real questions whether they will be inadequate or too late. While industry in space likewise cannot provide perfect assurance, it is uniquely able to solve the root problem, and it gives us an important chance that we should grasp. What makes this such an historic opportunity is that the space-based solution is obtainable as a side-benefit of doing space science and exploration within their existing budgets. Thinking pragmatically, it may take some time for policymakers to agree that setting up a complete supply chain is an achievable goal, so this paper describes a strategy of incremental progress. The most crucial part of this strategy is establishing a water economy by mining on the Moon and asteroids to manufacture rocket propellant. Technologies that support a water economy will play an

Integrating Efficiency of Industry Processes and Practices Alongside Technology Effectiveness in Space Transportation Cost Modeling and Analysis

Science.gov (United States)

Zapata, Edgar

2012-01-01

This paper presents past and current work in dealing with indirect industry and NASA costs when providing cost estimation or analysis for NASA projects and programs. Indirect costs, when defined as those costs in a project removed from the actual hardware or software hands-on labor; makes up most of the costs of today's complex large scale NASA space/industry projects. This appears to be the case across phases from research into development into production and into the operation of the system. Space transportation is the case of interest here. Modeling and cost estimation as a process rather than a product will be emphasized. Analysis as a series of belief systems in play among decision makers and decision factors will also be emphasized to provide context.

Novel Amalgams for In-Space Fabrication of Replacement Parts

Science.gov (United States)

Cochran, Calvin T.; Van Hoose, James R.; Grugel, R. N.

2012-01-01

Being able to fabricate replacement parts during extended space flight missions precludes the weight, storage volume, and speculation necessary to accommodate spares. Amalgams, widely used in dentistry, are potential candidates for fabricating parts in microgravity environments as they are moldable, do not require energy for melting, and do not pose fluid handling problems. Unfortunately, amalgams have poor tensile strength and the room temperature liquid component is mercury. To possibly resolve these issues a gallium-indium alloy was substituted for mercury and small steel fibers were mixed in with the commercial alloy powder. Subsequent microscopic examination of the novel amalgam revealed complete bonding of the components, and mechanical testing of comparable samples showed those containing steel fibers to have a significant improvement in strength. Experimental procedures, microstructures, and test results are presented and discussed in view of further improving properties.

The approach to risk analysis in three industries: nuclear power, space systems, and chemical process

International Nuclear Information System (INIS)

Garrick, B.J.

1988-01-01

The aerospace, nuclear power, and chemical processing industries are providing much of the incentive for the development and application of advanced risk analysis techniques to engineered systems. Risk analysis must answer three basic questions: What can go wrong? How likely is it? and What are the consequences? The result of such analyses is not only a quantitative answer to the question of 'What is the risk', but, more importantly, a framework for intelligent and visible risk management. Because of the societal importance of the subject industries and the amount of risk analysis activity involved in each, it is interesting to look for commonalities, differences, and, hopefully, a basis for some standardization. Each industry has its strengths: the solid experience base of the chemical industry, the extensive qualification and testing procedures of the space industry, and the integrative and quantitative risk and reliability methodologies developed for the nuclear power industry. In particular, most advances in data handling, systems interaction modeling, and uncertainty analysis have come from the probabilistic risk assessment work in the nuclear safety field. In the final analysis, all three industries would greatly benefit from a more deliberate technology exchange program in the rapidly evolving discipline of quantitative risk analysis. (author)

Space Product Development: Bringing the Benefits of Space Down to Earth

Science.gov (United States)

Allen, Rosalie W.; Tygielski, Andrew; Gabris, Edward A.

1997-01-01

The newly developed microgravity Research Program Office was created to consolidate and integrate NASA's microgravity research efforts, comprised of the microgravity Science and Applications Program and Space Product Development Program. This resulted in an integrated agency program serving the science and industrial research communities, providing leadership, management, direction and overview of all agency microgravity research activities. This paper provides an overview of NASA's microgravity Research Program, with particular emphasis on the Space Product Development Program activities, the potential economic impact and quality of life improvements resulting from this research, and future plans for commercial microgravity research in space. The goal of the Space Product Development Program is to facilitate the use of space for commercial products and services. The unique attributes of space are exploited to conduct industry driven research in the areas of crystallography, bio-systems, agriculture, electronic and non-electronic materials. Industry uses the knowledge gained from focused space research to create new products and processes, to gain economic competitive advantages, to create new jobs and improve the quality of life on earth. The objectives of the program are implemented through NASA's Commercial Space Centers, non-profit consortia of industry, academia and government, that provide the mechanism for communication and technical expert exchange between NASA and industry. Over 200 commercial research activities have been conducted by the Commercial Space Centers and their industrial affiliates over the last four and one-half years during Space Shuttle mission, as well as sounding rocket flights. The results of this research will have a significant impact on competitive products, jobs and quality of life improvements.

Using Industrial Robots to Manipulate the Measured Object in CMM

Directory of Open Access Journals (Sweden)

Samir Lemes

2013-07-01

Full Text Available Coordinate measuring machines (CMMs are widely used to check dimensions of manufactured parts, especially in the automotive industry. The major obstacles in automation of these measurements are fixturing and clamping assemblies, which are required in order to position the measured object within the CMM. This paper describes how an industrial robot can be used to manipulate the measured object within the CMM work space, in order to enable automation of complex geometry measurement.

Recycling industrial waste in brick manufacture. Part 1

Directory of Open Access Journals (Sweden)

Andreola, F.

2005-12-01

Full Text Available The ongoing accumulation of industrial waste speaks to the need to seek cost-effective disposal methods. Brick manufacture would appear to be particularly promising in this regard. The present study analyzes the possibility of recycling the sludge generated in porcelain tile polishing, as well as coal, steel and municipal incinerator ash to make a special type of facing brick whose properties readily accommodate a full analysis of all the problems deriving from the incorporation of residue in its manufacture. Physical-chemical, mechanical and structural analyses were performed on bricks made with varying percentages of the different types of waste considered. This first paper reports the results of the physical arid technological characterization of the products; the second part of the research will address their chemical, mechanical and structural properties.

El continuo aumento de la cantidad de residuos (desechos que se generan en los procesos industriales induce a buscar nuevos métodos alternativos a la disposición final que sean altamente eficientes y a bajo costo. La industria manufac turera de ladrillos resulta muy prometedora desde este punto de vista. En este trabajo ha sido investigada la posibilidad de usar distintos residuos industriales, entre ellos barros de pulido del gres porcelánico. cenizas de carbón, cenizas de acerías y de incinerador municipal para la fabricación de ladrillos de exteriores. Fueron analizados los problemas que podrían derivar al introducir estos residuos en la pasta. En particular, en esta primera parte del trabajo se muestran los resultados derivados de la introducción de los residuos considerados, en distintos porcentajes, sobre las propiedades físicas y tecnológicas del producto final. En la segunda parte se desarrollarán los efectos causados sobre las propiedades químicas, mecánicas y microestructurales.

Space Colonization Using Space-Elevators from Phobos

Science.gov (United States)

Weinstein, Leonard M.

2003-01-01

A novel approach is examined for creating an industrial civilization beyond Earth. The approach would take advantage of the unique configuration of Mars and its moon Phobos to make a transportation system capable of raising mass from the surface of Mars to space at a low cost. Mars would be used as the primary location for support personnel and infrastructure. Phobos would be used as a source of raw materials for space-based activity, and as an anchor for tethered carbon-nanotube-based space-elevators. One space-elevator would terminate at the upper edge of Mars' atmosphere. Small craft would be launched from Mars' surface to rendezvous with the moving elevator tip and their payloads detached and raised with solar powered loop elevators to Phobos. Another space-elevator would be extended outward from Phobos to launch craft toward the Earth/Moon system or the asteroid belt. The outward tip would also be used to catch arriving craft. This approach would allow Mars to be colonized, and allow transportation of people and supplies from Mars to support the space industry. In addition, large quantities of material obtained from Phobos could be used to construct space habitats and also supply propellant and material for space industry in the Earth/Moon system as well as around Mars.

Municipal strategies for introducing housing on industrial estates as part of compact-city policies in the Netherlands

NARCIS (Netherlands)

Korthals Altes, W.K.; Tambach, M.

2009-01-01

Promoting mixed-use development is part of policies aimed at enhancing urban quality. Until recently, however, industry and housing have rarely been found together in the same development as there is a long tradition of keeping these functions separate. As part of a compact-city policy, Dutch local

Nostalgia Spaces of Consumption and Heterotopia Ramadan Festivities in Istanbul

Directory of Open Access Journals (Sweden)

Defne Karaosmanoglu

2010-06-01

Full Text Available Contemporary city cultures are often defined in relation to the processes of late-capitalism and commodification. Today, in various parts of the world, the previ-ously dominant industrial cities have been replaced by cities of consumption (Urry 1995: 123. Cities are treated as sites for representation, masquerade and sociability (Featherstone and Lash 1999: 3. National and religious celebrations and culinary festivals are parts of the dynamism of city life where nostalgia be-comes a marketing strategy. This article looks at the nostalgia industry in the con-temporary city of Istanbul in connection to the Ramadan festivities and iftar tables as everyday spaces of spectacle and consumption. It examines the ways in which the Ramadan space is articulated in everyday practices not only as a site of spec-tacle formed by both global and local discourses, but also as a form of sociability that brings people together.

Making Industry Part of the Climate Solution

Energy Technology Data Exchange (ETDEWEB)

Lapsa, Melissa Voss [ORNL; Brown, Dr. Marilyn Ann [Georgia Institute of Technology; Jackson, Roderick K [ORNL; Cox, Matthew [Georgia Institute of Technology; Cortes, Rodrigo [Georgia Institute of Technology; Deitchman, Benjamin H [ORNL

2011-06-01

Improving the energy efficiency of industry is essential for maintaining the viability of domestic manufacturing, especially in a world economy where production is shifting to low-cost, less regulated developing countries. Numerous studies have shown the potential for significant cost-effective energy-savings in U.S. industries, but the realization of this potential is hindered by regulatory, information, workforce, and financial obstacles. This report evaluates seven federal policy options aimed at improving the energy efficiency of industry, grounded in an understanding of industrial decision-making and the barriers to efficiency improvements. Detailed analysis employs the Georgia Institute of Technology's version of the National Energy Modeling System and spreadsheet calculations, generating a series of benefit/cost metrics spanning private and public costs and energy bill savings, as well as air pollution benefits and the social cost of carbon. Two of the policies would address regulatory hurdles (Output-Based Emissions Standards and a federal Energy Portfolio Standard with Combined Heat and Power); three would help to fill information gaps and workforce training needs (the Superior Energy Performance program, Implementation Support Services, and a Small Firm Energy Management program); and two would tackle financial barriers (Tax Lien Financing and Energy-Efficient Industrial Motor Rebates). The social benefit-cost ratios of these policies appear to be highly favorable based on a range of plausible assumptions. Each of the seven policy options has an appropriate federal role, broad applicability across industries, utilizes readily available technologies, and all are administratively feasible.

Designing carbon markets, Part II: Carbon markets in space

International Nuclear Information System (INIS)

Fankhauser, Samuel; Hepburn, Cameron

2010-01-01

This paper analyses the design of carbon markets in space (i.e., geographically). It is part of a twin set of papers that, starting from first principles, ask what an optimal global carbon market would look like by around 2030. Our focus is on firm-level cap-and-trade systems, although much of what we say would also apply to government-level trading and carbon offset schemes. We examine the 'first principles' of spatial design to maximise flexibility and to minimise costs, including key design issues in linking national and regional carbon markets together to create a global carbon market.

The Spatialities of Urban Economic Geographies: New Industrial Spaces in the Outer City of Copenhagen

DEFF Research Database (Denmark)

Hansen, Høgni Kalsø; Winther, Lars

2007-01-01

The paper focuses on the transformation of the industrial structure and the location dynamics on the edge of the metropolitan region of Copenhagen with the aim of explaining the rise of new spaces in the urban economic geography. The main concern of the paper is the role the transformation...... of the outer city plays in the urban economy of Copenhagen. The centre of attention is on the changing industrial structure, the progressively higher complexity of firm location, and the division of labour that have emerged in the past decade of growth as a result of the resurgence of the metropolitan region...... of Copenhagen. The recent changes in the economic geographies of the outer city of Copenhagen are used as a launch pad for discussing the theoretical and analytical challenges in understanding the industrial change in new urban forms....

Factors Affecting Green Supply Chain Operational Performance of the Thai Auto Parts Industry

Directory of Open Access Journals (Sweden)

Korrakot Yaibuathet Tippayawong

2016-11-01

Full Text Available In this work, operational performance in the green supply chain management (SCM of the Thai auto parts industry was investigated. A green supply chain performance measurement (GSPM model was developed from the combination of various concepts including an SCM logistics scorecard, a supply chain operations reference model, a balance scorecard, and green supply chain management. The GSPM has been designed for use as a self-evaluation tool focusing on five decisive areas, or factors, and 28 sub-factors. A factor analysis was conducted using the survey results of the GSPM in order to identify significant factors that represent the green supply chain operation performance. Grouped as three major factors, namely green procurement, green transportation, and green manufacturing; reverse logistics and eco-design; and reuse and recycle of manufacturing, their significance and impact on the auto parts industry in Thailand were highlighted. Specifically, the factor of green procurement, green transportation, and green manufacturing, as major factor 1, in relation with the factor of reverse logistics and eco-design, as major factor 2, were found to have a strong positive relationship with the asset turnover ratio.

University of Central Florida / Deep Space Industries Asteroid Regolith Simulants

Science.gov (United States)

Britt, Daniel; Covey, Steven D.; Schultz, Cody

2017-10-01

Introduction: The University of Central Florida (UCF), in partnership with Deep Space Industries (DSI) are working under a NASA Phase 2 SBIR contract to develop and produce a family of asteroid regolith simulants for use in research, engineering, and mission operations testing. We base simulant formulas on the mineralogy, particle size, and physical characteristics of CI, CR, CM, C2, CV, and L-Chondrite meteorites. The advantage in simulating meteorites is that the vast majority of meteoritic materials are common rock forming minerals that are available in commercial quantities. While formulas are guided by the meteorites our approach is one of constrained maximization under the limitations of safety, cost, source materials, and ease of handling. In all cases our goal is to deliver a safe, high fidelity analog at moderate cost.Source Materials, Safety, and Biohazards: A critical factor in any useful simulant is to minimize handling risks for biohazards or toxicity. All the terrestrial materials proposed for these simulants were reviewed for potential toxicity. Of particular interest is the organic component of volatile rich carbonaceous chondrites which contain polycyclic aromatic hydrocarbons (PAHs), some of which are known carcinogens and mutagens. Our research suggests that we can maintain rough chemical fidelity by substituting much safer sub-bituminous coal as our organic analog. A second safety consideration is the choice of serpentine group materials. While most serpentine polymorphs are quite safe we avoid fibrous chrysotile because of its asbestos content. Terrestrial materials identified as inputs for our simulants are common rock forming minerals that are available in commercial quantities. These include olivine, pyroxene, plagioclase feldspar, smectite, serpentine, saponite, pyrite, and magnetite in amounts that are appropriate for each type. For CI's and CR’s, their olivines tend to be Fo100 which is rare on Earth. We have substituted Fo90 olivine

Kennedy Space Center Spaceport Analysis

Science.gov (United States)

Wary, Samantha A.

2013-01-01

Until the Shuttle Atlantis' final landing on July 21, 2011, Kennedy Space Center (KSC) served as NASA's main spaceport, which is a launch and landing facility for rockets and spacecraft that are attempting to enter orbit. Many of the facilities at KSC were created to assist the Shuttle Program. One of the most important and used facilities is the Shuttle Landing Facility (SLF), This was the main landing area for the return of the shuttle after her mission in space. · However, the SLF has also been used for a number of other projects including straight-line testing by Gibbs Racing, weather data collection by NOAA, and an airfield for the KSC helicopters. This runway is three miles long with control tower at midfield and a fire department located at the end in care of an emergency. This facility, which was part of the great space race, will continue to be used for historical events as Kennedy begins to commercialize its facilities. KSC continues to be an important spaceport to the government, and it will transform into an important spaceport for the commercial industry as well. During my internship at KSC's Center Planning and Development Directorate, I had the opportunity to be a part of the negotiation team working on the agreement for Space Florida to control the Shuttle Landing Facility. This gave me the opportunity to learn about all the changes that are occurring here at Kennedy Space Center. Through various meetings, I discovered the Master Plan and its focus is to transform the existing facilities that were primarily used for the Shuttle Program, to support government operations and commercial flights in the future. This. idea is also in a new strategic business plan and completion of a space industry market analysis. All of these different documentations were brought to my attention and I. saw how they came together in the discussions of transitioning the SLF to a commercial operator, Space Florida. After attending meetings and partaking in discussions for

Alenia Spazio: Space Programs for Solar System Exploration .

Science.gov (United States)

Ferri, A.

Alenia Spazio is the major Italian space industry and one of the largest in Europe, with 2,400 highly skilled employees and 16,000 square meters of clean rooms and laboratories for advanced technological research that are among the most modern and well-equipped in Europe. The company has wide experience in the design, development, assembly, integration, verification and testing of complete space systems: satellites for telecommunications and navigation, remote sensing, meteorology and scientific applications; manned systems and space infrastructures; launch, transport and re-entry systems, and control centres. Alenia Spazio has contributed to the construction of over 200 satellites and taken part in the most important national and international space programmes, from the International Space Station to the new European global navigation system Galileo. Focusing on Solar System exploration, in the last 10 years the Company took part, with different roles, to the major European and also NASA missions in the field: Rosetta, Mars Express, Cassini; will soon take part in Venus Express, and is planning the future with Bepi Colombo, Solar Orbiter, GAIA and Exomars. In this paper, as in the presentation, a very important Earth Observation mission is also presented: GOCE. All in all, the Earth is by all means part of the Solar system as well and we like to see it as a planet to be explored.

The Impact of Space Commercialization on Space Agencies: the Case of NASA

Science.gov (United States)

Zervos, Vasilis

2002-01-01

The purpose of this paper is to examine the hypothesis that commercialisation of space results in inefficient contracting policies by the space agencies, using the US NASA as a case study. Though commercialisation is seen by many as a way to reduce costs in space programmes, as the space industry is seen as a decreasing costs industry, this is not a problem-free process. Commercialisation of space has affected the US and European space industries and policies in two major ways. The first is that the public sector actively encourages mergers and acquisitions of major contractors, confined, however, within the geographical borders of the US and Europe. This follows largely from the perceived benefits of economies of size when competing in global commercial markets. The second is the formation of an increasing number of public-private partnerships (PPPs) in space programmes and a more `cosy' relationship between the two within a public-assistance strategic trade theoretic framework. As ESA's contracting policy of `juste retour' is marked by limited competition, the paper focuses on the case of NASA, which is expected to be more pro- competitive, to examine the impact of commercialisation. With the use of quantitative methods based on time series econometric analysis, the paper shows that NASA's contracting policy, results in increasingly less competition and more rent-favouring contracting. This is attributed to the decreasing number of major contractors in conjunction with the preferential treatment of the domestic space industry (`Buy American'). The results of the paper verify that the support of the domestic space industry in commercial and public space markets results in inefficient contracting policies, with NASA facing the conflicting tasks of a stated policy of enhancing competition and efficiency in contracting, as well as, supporting the competitiveness of the domestic space industry. The paper concludes with an analysis and assessment of solutions to this

MERCURY IN ATMOSPHERE OVER RURAL, URBAN AND INDUSTRIAL PARTS OF ZAGREB CITY

Directory of Open Access Journals (Sweden)

Ladislav A. Palinkaš

1990-12-01

Full Text Available In recent years Zagreb city encounters severe pollution problems in aquatic, terrrestrial and atmospheric environment. A random or permanent monitoring of some inorganic gaseous pollutants in atmosphere has already been organized and published alsewhere. By means of a sophisticated mercury vapor analyser with a Zeeman effect background corrector, however, continuous registration along two traverses (monitoring routes over rural, urban and industrial parts of Zagreb has been elaborated for the first lime. Data show strong anthropogenic influence in the Žitnjak industrial area. The anomaly high 105 ngm Hg, on the 22 October moved slightly to downtown by change of wind direction on the 31 October. Intensity raised as much as 155 ngm Hg, 13 times augmented in comparison to a background value on the Medvednica mountain. Explanation should be sought in denser public traffic, change of wind direction and lowering of atmospheric pressure.

Industrial heritage and tourism: analysis of potentiality and motion for a circuit of industrial tourism in Barracas, Buenos Aires, Argentina

Directory of Open Access Journals (Sweden)

Aldo Guzman Ramos

2016-03-01

Full Text Available Argentina´s industrial development which started at the end of 19th  century and suffered a drop in 1970 decade has left numerous real state and private properties spread in the national territory. It`s feasible to use them through Industrial Tourism as a mechanism to economically and socially reactivate abandoned spaces and in crisis, but also as a way to revitalize their identity and culture recovering a part of their history. Exploratory and descriptive methodology implied a reconnaissance of industrial properties located in Barracas neighborhood from Ciudad de Buenos Aires, Argentina, applying variables to determine the state and touristic-recreational potentiality by means of Likert scale. As a result 68 places were selected and after utilizing the variables 24 sites remained, which were organized to prepare an Industrial Tourist Circuit that could complement Buenos Aires cultural offer.

Public choice economics and space policy: realising space tourism

Science.gov (United States)

Collins, Patrick

2001-03-01

Government space agencies have the statutory responsibility to suport the commercialisation of space activities. NASA's 1998 report "General Public Space Travel and Tourism" concluded that passenger space travel can start using already existing technology, and is likely to grow into the largest commercial activity in space: it is therefore greatly in taxpayers' economic interest that passenger space travel and accommodation industries should be developed. However, space agencies are doing nothing to help realise this — indeed, they are actively delaying it. This behaviour is predicted by 'public choice' economics, pioneered by Professors George Stigler and James Buchanan who received the 1982 and 1986 Nobel prizes for Economics, which views government organisations as primarily self-interested. The paper uses this viewpoint to discuss public and private roles in the coming development of a space tourism industry.

Study of extraterrestrial disposal of radioactive wastes. Part 1: Space transportation and destination considerations for extraterrestrial disposal of radioactive wastes. [feasibility of using space shuttle

Science.gov (United States)

Thompson, R. L.; Ramler, J. R.; Stevenson, S. M.

1974-01-01

A feasibility study of extraterrestrial disposal of radioactive waste is reported. This report covers the initial work done on only one part of the NASA study, that evaluates and compares possible space destinations and space transportation systems. The currently planned space shuttle was found to be more cost effective than current expendable launch vehicles by about a factor of 2. The space shuttle requires a third stage to perform the waste disposal missions. Depending on the particular mission, this third stage could be either a reusable space tug or an expendable stage such as a Centaur.

Profiles of Major Suppliers to the Automotive Industry : Vol. 5. Multinational Automotive Parts and Components Suppliers

Science.gov (United States)

1982-08-01

This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

Profiles of Major Suppliers to the Automotive Industry : Vol. 6. Foreign Automotive Parts and Components Suppliers.

Science.gov (United States)

1982-08-01

This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

Industrial Waste

DEFF Research Database (Denmark)

Christensen, Thomas Højlund

2011-01-01

generation rates and material composition as well as determining factors are discussed in this chapter. Characterizing industrial waste is faced with the problem that often only a part of the waste is handled in the municipal waste system, where information is easily accessible. In addition part...... of the industrial waste may in periods, depending on market opportunities and prices, be traded as secondary rawmaterials. Production-specificwaste from primary production, for example steel slag, is not included in the current presentation. In some countries industries must be approved or licensed and as part...... of the system industry has to inform at the planning stage and afterwards in yearly reports on their waste arising and how the waste is managed. If available such information is very helpful in obtaining information about that specific industry. However, in many countries there is very little information...

Challenges with Electrical, Electronics, and Electromechanical Parts for James Webb Space Telescope

Science.gov (United States)

Jah, Muzar A.; Jeffers, Basil S.

2016-01-01

James Webb Space Telescope (JWST) is the space-based observatory that will extend the knowledge gained by the Hubble Space Telescope (HST). Hubble focuses on optical and ultraviolet wavelengths while JWST focuses on the infrared portion of the electromagnetic spectrum, to see the earliest stars and galaxies that formed in the Universe and to look deep into nearby dust clouds to study the formation of stars and planets. JWST, which commenced creation in 1996, is scheduled to launch in 2018. It includes a suite of four instruments, the spacecraft bus, optical telescope element, Integrated Science Instrument Module (ISIM, the platform to hold the instruments), and a sunshield. The mass of JWST is approximately 6200 kg, including observatory, on-orbit consumables and launch vehicle adaptor. Many challenges were overcome while providing the electrical and electronic components for the Goddard Space Flight Center hardware builds. Other difficulties encountered included developing components to work at cryogenic temperatures, failures of electronic components during development and flight builds, Integration and Test electronic parts problems, and managing technical issues with international partners. This paper will present the context of JWST from a EEE (electrical, electronic, and electromechanical) perspective with examples of challenges and lessons learned throughout the design, development, and fabrication of JWST in cooperation with our associated partners including the Canadian Space Agency (CSA), the European Space Agency (ESA), Lockheed Martin and their respective associated partners. Technical challenges and lessons learned will be discussed.

Computed tomography of the carotid space and related cervical spaces. Part 1. Anatomy

International Nuclear Information System (INIS)

Silver, A.J.; Mawad, M.E.; Hilal, S.K.; Sane, P.; Ganti, S.R.

1984-01-01

The carotid space, parapharyngeal space, and paraspinal space are described. The carotid space is shown on computed tomography (CT) to be posterior to the parapharyngeal space and separated from it by the styloid apparatus. The paraspinal space is posterior to the carotid space and separated from it by the longus and anterior scalene muscles

Bibliography of selected research reports on occupational medicine in nuclear industry of China (list of subjects, 1958-1988)

International Nuclear Information System (INIS)

Wu Qi; Sun Jinkai; Zhang Xuzong; Li Guangyu; Chen Shaojia; Ni Xiangting

1991-10-01

A bibliography of 648 research reports on occupational medicine in the past 30 years in nuclear industry is presented. It gives only a list of titles with affiliations. It contains four parts. The first part is on experimental study including internal contamination with radionuclides, radiobiology, radiotoxicology and radiohygiene. The second part focuses on epidemiological investigation including radioepidemiological investigation and on-site investigation of occupational detriment. The third part concentrates on radiation injury clinic, including internal contamination with radionuclides, β-ray skin injury radiohematology, emergency handling for radiation accident, as well as silicosis and lung cancer of uranium miners. And the last part gives space to occupational detriment from non-radiation industrial poisonous materials

Real-world educational experience through project-oriented graduate classes in collaboration with industry

Science.gov (United States)

Zurbuchen, Thomas H.

2007-04-01

There is a need for a motivated and innovative work force for the U.S. aerospace industry. The education of such engineers and scientists typically revolves around a fundamental knowledge of basic important technologies, such as the mechanics relevant to orbit-design, structures, avionics, and many others. A few years ago, the University of Michigan developed a Masters of Engineering program that provides students with skills that are not taught as part of a typical engineering curriculum. This program is focused on open problem solving, space systems, and space policy, as well as other classes that further their understanding of the connections between technologies and the nontechnical aspects of managing a space mission. The value of such an education is substantially increased through a direct connection to industry. An innovative problem-oriented approach has been developed that enables direct connections between industry and classroom teaching. The class works as a system study group and addresses problems of interest to and defined by a company with a specific application. We discuss such an application, a near-space lidar wind measurement system to enhance weather predictions, as well as the approach taken to link educational rationales.

INTEGRATION OF UKRAINIAN INDUSTRY SCIENTIFIC PERIODACLS INTO WORLD SCIENTIFIC INFORMATION SPACE: PROBLEMS AND SOLUTIONS

Directory of Open Access Journals (Sweden)

T. O. Kolesnykova

2013-11-01

Full Text Available Purpose. Problem of representation lack of scientists’ publications, including transport scientists, in the international scientometric databases is the urgent one for Ukrainian science. To solve the problem one should study the structure and quality of the information flow of scientific periodicals of railway universities in Ukraine and to determine the integration algorithm of scientific publications of Ukrainian scientists into the world scientific information space. Methodology. Applying the methods of scientific analysis, synthesis, analogy, comparison and prediction the author has investigated the problem of scientific knowledge distribution using formal communications. The readiness of Ukrainian railway periodicals to registration procedure in the international scientometric systems was analyzed. The level of representation of articles and authors of Ukrainian railway universities in scientometric database Scopus was studied. Findings. Monitoring of the portals of railway industry universities of Ukraine and the sites of their scientific periodicals and analysis of obtained data prove insufficient readiness of most scientific publications for submission to scientometric database. The ways providing sufficient "visibility" of industry periodicals of Ukrainian universities in the global scientific information space were proposed. Originality. The structure and quality of documentary flow of scientific periodicals in railway transport universities of Ukraine and its reflection in scientometric DB Scopus were first investigated. The basic directions of university activities to integrate the results of transport scientists research into the global scientific digital environment were outlined. It was determined the leading role of university libraries in the integration processes of scientific documentary resources of universities into the global scientific and information communicative space. Practical value. Implementation of the proposed

Priorities in national space strategies and governance of the member states of the European Space Agency

Science.gov (United States)

Adriaensen, Maarten; Giannopapa, Christina; Sagath, Daniel; Papastefanou, Anastasia

2015-12-01

The European Space Agency (ESA) has twenty Member States with a variety of strategic priorities and governance structures regarding their space activities. A number of countries engage in space activities exclusively though ESA, while others have also their own national space programme. Some consider ESA as their prime space agency and others have additionally their own national agency with respective programmes. The main objective of this paper is to provide an up-to date overview and a holistic assessment of strategic priorities and the national space governance structures in 20 ESA Member States. This analysis and assessment has been conducted by analysing the Member States public documents, information provided at ESA workshop on this topic and though unstructured interviews. The paper is structured to include two main elements: priorities and trends in national space strategies and space governance in ESA Member States. The first part of this paper focuses on the content and analysis of the national space strategies and indicates the main priorities and trends in Member States. The priorities are categorised with regards to technology domains, the role of space in the areas of sustainability and the motivators that boost engagement in space. These vary from one Member State to another and include with different levels of engagement in technology domains amongst others: science and exploration, navigation, Earth observation, human space flight, launchers, telecommunications, and integrated applications. Member States allocate a different role of space as enabling tool adding to the advancement of sustainability areas including: security, resources, environment and climate change, transport and communication, energy, and knowledge and education. The motivators motivating reasoning which enhances or hinders space engagement also differs. The motivators identified are industrial competitiveness, job creation, technology development and transfer, social benefits

Space tourism risks: A space insurance perspective

Science.gov (United States)

Bensoussan, Denis

2010-06-01

Space transportation is inherently risky to humans, whether they are trained astronauts or paying tourists, given that spaceflight is still in its relative infancy. However, this is easy to forget when subjected to the hype often associated with space tourism and the ventures seeking to enter that market. The development of commercial spaceflight constitutes a challenge as much as a great opportunity to the insurance industry as new risks emerge and standards, policies and procedures to minimise/mitigate and cover them still to be engineered. Therefore the creation of a viable and affordable insurance regime for future space tourists is a critical step in the development of a real space tourism market to address burning risk management issues that may otherwise ultimately hamper this nascent industry before it has a chance to prove itself.

Space nuclear power systems, Part 2

International Nuclear Information System (INIS)

El-Genk, M.S.; Hoover, M.D.

1992-01-01

This volume, number two of three, contains the reviewed and edited papers were being presented at the Ninth Symposium in Albuquerque, New Mexico, 12--16 January 1992. The objective of the symposium, and hence these volumes, is to summarize the state of knowledge in the area of space nuclear power and propulsion and to provide a forum at which the most recent findings and important new developments can be presented and discussed. Topics included is this volume are: reactor and power systems control; thermionic energy conversion; space missions and power needs; key issues in nuclear and propulsion; nuclear thermal propulsion; manufacturing and processing; thermal management; space nuclear safety; and nuclear testing and production facilities

Mining space and industrial heritage in Mexico: the mineral from Tlalpujahua [Michoacán state

Directory of Open Access Journals (Sweden)

José Alfredo Uribe Salas

2014-12-01

Full Text Available This paper deals with the historical dimension of the economic and social space of Tlalpujahua and El Oro Mining District from the perspective of the Industrial Heritage. The exploration and exploitation in search for precious minerals along the sixteenth to the twentieth centuries articulated a culture of wage labour and facilitated the circulation of new knowledge, technical expertise and an impressive technological innovation in the late nineteenth and early twentieth centuries. With the depletion of gold and silver in the mid-twentieth century, the socio-technical framework disappears but not the memory and industrial vestiges which represents long-term historical processes, and as a social laboratory allows to recognize and analyze the changes in the social relations of different human groups, different nationality and social status — workers, technicians, engineers, businessmen, traders, etc. —, who moved to the minerals in the quest to materialise their own life expectancy. The study and appreciation of the historical and cultural experience ensures the memory of the industrial heritage of Mexicans.

Sustainable industrial estate by managing the building coverage ratio in Cibitung Industrial Town, Indonesia

Science.gov (United States)

Budiyanto, T. M. T.; Prajitno, I. S.; Hasibuan, H. S.

2018-03-01

The problem faced in the management of the industrial estate is the development of industrial buildings which are not in accordance with the existing environmental regulations, especially the building coverage ratio (BCR). This violation is due to the limitation of industrial land owned, and the tenant’s desire to maximize building area. This research conducted at Cibitung Industrial Town, Indonesia, to assess the compliance of industrial building in complying with environmental regulations, and efforts by industrial estate manager together with industrial communities to meet building regulations. The compliance is shown from the conformity of the tenant’s BCR to the building provisions contained in the regulation within the industrial estate; which is maximum 60% from land owned. And whether the rest of green open space (GOS) area can still be maintained at a minimum 10%. This study found tenant’s building density (BCR) at 24.55% population was 84.77%, and the rest of green open space at 21.56% population was only 2.49%. Excessive building development and expansion by the industrial communities, led to a continued reduction in green open space as a rainwater absorption area. It is resulting the rainfall runoff directly into the environmental drainage system, and causing flooding in the region.

Profiles of Major Suppliers to the Automotive Industry : Vol. 4. North American Automotive Parts and Components Suppliers

Science.gov (United States)

1982-08-01

This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

NASA Electronic Parts and Packaging (NEPP): Space Qualification Guidelines of Optoelectronic and Photonic Devices for Optical Communication Systems

Science.gov (United States)

Kim, Quiesup

2001-01-01

Key elements of space qualification of opto-electric and photonic optical devices were overviewed. Efforts were concentrated on the reliability concerns of the devices needed for potential applications in space environments. The ultimate goal for this effort is to gradually establish enough data to develop a space qualification plan of newly developed specific photonic parts using empirical and numerical models to assess the life-time and degradation of the devices for potential long term space missions.

Energy from biomass. Summaries of the Biomass Projects carried out as part of the Department of Trade and Industry`s New and Renewable Energy Programme. Vol. 4: anaerobic digestion for biogas

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

These volumes of summaries provide easy access to the many projects carried out in the Energy from Biomass programme area as part of the Department of Trade and Industry`s New and Renewable Energy Programme. The summaries in this volume cover contractor reports on the subject published up to December 1997. (author)

Aviation & Space Weather Policy Research: Integrating Space Weather Observations & Forecasts into Operations

Science.gov (United States)

Fisher, G.; Jones, B.

2006-12-01

The American Meteorological Society and SolarMetrics Limited are conducting a policy research project leading to recommendations that will increase the safety, reliability, and efficiency of the nation's airline operations through more effective use of space weather forecasts and information. This study, which is funded by a 3-year National Science Foundation grant, also has the support of the Federal Aviation Administration and the Joint Planning and Development Office (JPDO) who is planning the Next Generation Air Transportation System. A major component involves interviewing and bringing together key people in the aviation industry who deal with space weather information. This research also examines public and industrial strategies and plans to respond to space weather information. The focus is to examine policy issues in implementing effective application of space weather services to the management of the nation's aviation system. The results from this project will provide government and industry leaders with additional tools and information to make effective decisions with respect to investments in space weather research and services. While space weather can impact the entire aviation industry, and this project will address national and international issues, the primary focus will be on developing a U.S. perspective for the airlines.

Modelling of an industrial environment, part 2.: External dose calculation with relevant countermeasures

International Nuclear Information System (INIS)

Eged, K.; Kis, Z.; Alvarez-Farizo, B.; Gil, J.; Voigt, G.

2002-01-01

The calculation of the collective dose and averted collective dose after applying countermeasures in an industrial environment has been divided in two parts. In the first part (Kis et al. 2002) separate Monte Carlo simulations of photon transport resulted in the air kermas per photon per unit area due to the industrial surfaces contaminated by 1 37C s at specific points using the so-called local approach. In the local approach the air kerma rates due to specific intervention elements at the evaluation locations in the whole environment are determined (Gutierrez et al. 2000). In this way the collective and averted collective dose due to the radiation from a particular intervention element (e.g. the roof of a building) can be obtained. It can, therefore, provide a ranking of the specific intervention elements based on their contribution to collective dose as well. The deposition pattern and the long-term behaviour of deposited radionuclides vary widely in natural circumstances; therefore the number of the photons emitted from the various surfaces per unit area and time can differ significantly. This means the results of the Monte Carlo simulations have to be weighted according to the number of emitted photons so that the actual radiation field can be set up. For this purpose, a dose calculation code has been developed in the framework of the TEMAS project (Gutierrez et al. 2000) which allows to calculate collective doses for different environments. This code has been applied in the present work

The link between aerospace industry and NASA during the Apollo years

Science.gov (United States)

Turcat, Nicolas

2008-01-01

Made in the frame of a French master on political history of USA in Paris IV La Sorbonne University, this subject is the third part of " The Economy of Apollo during the 60s". Nicolas Turcat is actually preparing his PhD in History of Innovation (DEA—Paris IV La Sorbonne). Our actual subject is " the link between aerospace industry and NASA during the Apollo years". This speech will highlight on some aspects of the link between NASA and aerospace industry. NASA could achieve the Apollo mission safely and under heavy financial pressure during the sixties due to a new type of organization for a civil agency; the contractor system. In fact, Military used it since the 1950s. And we will see how the development of this type of contract permitted a better interaction between the two parts. NASA would make another type of link with universities and technical institutes; a real brain trust was created, and between 1961 and 1967, 10,000 students worked and more than 200 universities on Apollo program. We will try to study briefly the procurement plan and process during the Apollo years. Without entering the " spin-offs debate", we will try to watch different aspects of the impacts and realities of the contractor and subcontractor system. We will see that would create a political debate inside USA when presidents Johnson and Nixon would decide to reduce Apollo program. Which states will benefit Apollo program? Or questions like how the debate at the end of the 1960s will become more and more political? Actually, almost 60% of the country's R&D was focused on Apollo, economical and moreover, political impacts would be great. We will try to study this under the light of different example: and particularly in California. The industrial and military complex was a part of the Apollo program. Apollo reoriented the aim of this complex for making it the first aerospace industry. Since this time, USA had not only acquired space ambition but real space capabilities. But more than

Preparing future space leaders - International Space University

Science.gov (United States)

Stone, Barbara A.; Van Reeth, George P.

1992-01-01

The International Space University (ISU) concept of developing a cadre of space professionals that will lead the universities and industries into space is discussed. ISU is an innovative, permanent worldwide organization for training and academic instruction in all aspects of space studies. ISU's major goal is to provide the young professional academic instruction in technical and nontechnical areas of modern space exploration and research, and a forum to exchange ideas and develop both personal and professional ties at an international level.

Space education in Kiruna, Northern Sweden

Directory of Open Access Journals (Sweden)

I. Sandahl

2005-01-01

Full Text Available The town of Kiruna in the north of Sweden has a concentration of space activities and space research with, for example, the Swedish Institute of Space Physics, Esrange, the ESA Salmijärvi satellite station, and EISCAT (European Incoherent Scatter Radar Scientific Association. The Department of Space Science is a joint department between the two most northern universities in Sweden, Luleå University of Technology and Umeå University in collaboration with the Swedish Institute of Space Physics. It offers a range of education programmes in the space field. There are bachelor and master programmes in space engineering, and a bridging programme for students without a science background from secondary school. The Department also contributes to courses for teachers, Ph.D. courses and secondary school level courses. One master´s program and a three week summer course are given entirely in English and welcome international students. Thanks to good cooperation with Esrange students can build and fly experiments on high altitude balloons and sounding rockets and also take a large responsibility for the management of the projects. Close interaction with research and industry is an important part of the education.

A gap analysis of meteorological requirements for commercial space operators

Science.gov (United States)

Stapleton, Nicholas James

Commercial space companies will soon be the primary method of launching people and supplies into orbit. Among the critical aspects of space launches are the meteorological concerns. Laws and regulations pertaining to meteorological considerations have been created to ensure the safety of the space industry and those living around spaceports; but, are they adequate? Perhaps the commercial space industry can turn to the commercial aviation industry to help answer that question. Throughout its history, the aviation industry has dealt with lessons learned from mishaps due to failures in understanding the significance of weather impacts on operations. Using lessons from the aviation industry, the commercial space industry can preempt such accidents and maintain viability as an industry. Using Lanicci's Strategic Planning Model, this study identified the weather needs of the commercial space industry by conducting three gap analyses. First, a comparative analysis was done between laws and regulations in commercial aviation and those in the commercial space industry pertaining to meteorological support, finding a "legislative gap" between the two industries, as no legal guarantee is in place to ensure weather products remain available to the commercial space industry. A second analysis was conducted between the meteorological services provided for the commercial aviation industry and commercial space industry, finding a gap at facilities not located at an established launch facility or airport. At such facilities, many weather observational technologies would not be present, and would need to be purchased by the company operating the spaceport facility. A third analysis was conducted between the meteorological products and regulations that are currently in existence, and those needed for safe operations within the commercial space industry, finding gaps in predicting lightning, electric field charge, and space weather. Recommendations to address these deficiencies have

Clausewitz on Space: Developing Military Space Theory Through a Comparative Analysis

National Research Council Canada - National Science Library

Streland, Arnold

1999-01-01

.... Our commercial space industry has become a huge economic center of gravity for our nation. Our enemies are discovering the benefits of space by developing their own systems and purchasing commercial space services...

Space education: Deriving benefits from industrial consortia

Science.gov (United States)

Stone, Barbara A.; Page, John R.

1993-01-01

As the number of spacefaring nations of the world increases, so does the difficulty of competing in a global economy. The development of high technology products and services for space programs, and the economic exploitation of these technologies for national economic growth, requires professionals versed in both technical and commercial aspects of space. Meeting this requirement academically presents two challenges. On the technical side, enrollment in science and engineering is decreasing in some of the spacefaring nations. From the commerce perspective, very few colleges and universities offer specific courses in space business.

Yearbook on space policy 2015 access to space and the evolution of space activities

CERN Document Server

Baranes, Blandina; Hulsroj, Peter; Lahcen, Arne

2017-01-01

The Yearbook on Space Policy, edited by the European Space Policy Institute (ESPI), is the reference publication analysing space policy developments. Each year it presents issues and trends in space policy and the space sector as a whole. Its scope is global and its perspective is European. The Yearbook also links space policy with other policy areas. It highlights specific events and issues, and provides useful insights, data and information on space activities. The first part of the Yearbook sets out a comprehensive overview of the economic, political, technological and institutional trends that have affected space activities. The second part of the Yearbook offers a more analytical perspective on the yearly ESPI theme and consists of external contributions written by professionals with diverse backgrounds and areas of expertise. The third part of the Yearbook carries forward the character of the Yearbook as an archive of space activities. The Yearbook is designed for government decision-makers and agencies...

High efficient ammonia heat pump system for industrial process water using the ISEC concept. Part 2

DEFF Research Database (Denmark)

Olesen, Martin F.; Madsen, Claus; Olsen, Lars

2014-01-01

The Isolated System Energy Charging (ISEC) concept allows for a high efficiency of a heat pump system for hot water production. The ISEC concept consists of two water storage tanks, one charged and one discharged. The charged tank is used for the industrial process, while the discharged tank...... is charging. The charging of the tank is done by recirculating water through the condenser and thereby gradually heating the water. The modelling of the system is described in Part I [1]. In this part, Part II, an experimental test setup of the tank system is reported, the results are presented and further...... modelling of the heat pump and tank system is performed (in continuation of Part I). The modelling is extended to include the system performance with different natural refrigerants and the influence of different types of compressors....

"We're Part of the Solution": Evolution of the Food and Beverage Industry's Framing of Obesity Concerns Between 2000 and 2012.

Science.gov (United States)

Nixon, Laura; Mejia, Pamela; Cheyne, Andrew; Wilking, Cara; Dorfman, Lori; Daynard, Richard

2015-11-01

We investigated how industry claim-makers countered concerns about obesity and other nutrition-related diseases in newspaper coverage from 2000, the year before the US Surgeon General's Call to Action on obesity, through 2012. We found that the food and beverage industry evolved in its response. The defense arguments were made by trade associations, industry-funded nonprofit groups, and individual companies representing the packaged food industry, restaurants, and the nonalcoholic beverage industry. Individual companies used the news primarily to promote voluntary self-regulation, whereas trade associations and industry-supported nonprofit groups directly attacked potential government regulations. There was, however, a shift away from framing obesity as a personal issue toward an overall message that the food and beverage industry wants to be "part of the solution" to the public health crisis.

Technology Infusion Within Part-Time Professional Development Programmes for Academic Staff and Industry Practitioners

OpenAIRE

McAvinia, Dr. Claire; McDonnell, Dr. Claire; Donnelly, Dr. Roisin

2016-01-01

This paper reports on the experiences of programme co-ordinators and includes findings from a two year (2013-15) evaluation pilot study on a key communication technology – audio feedback – conducted across three accredited part-time programmes for a blend of academic staff (faculty) in higher education and eLearning industry practitioners. Key to our decision making with regards to which tools to infuse in our programmes is our aim to help the educators who participate on our programmes to ma...

China's Expansion Into and U.S. Withdrawal from Argentina's Telecommunications and Space Industries and the Implications for U.S. National Security

National Research Council Canada - National Science Library

Hulse, Janie

2007-01-01

... up. In this monograph, Ms. Janie Hutse, a Latin Amen can specialist based in Buenos Aires, Argentina, argues that increased Chinese investment in regional telecommunications and space industries has implications for U.S. national security...

Preface: Space and geophysical research related to Latin America - Part 1

Science.gov (United States)

Mendoza, Blanca

2016-03-01

For the last 25 years, every two to three years the Conferencia Latinoamericana de Geofísica Espacial (COLAGE) is held in one of the Latin American countries for the purpose of promoting scientific exchange among scientists of the region and to encourage continued research that is unique to this area of the world. At the more recent conference, the community realized that many individuals both within and outside Latin America have contributed greatly to the understanding of the space sciences in this area of the world. It was therefore decided to assemble a Special Issue Space and Geophysical Physics related to Latin America, presenting recent results and where submissions would be accepted from the world wide community of scientists involved in research appropriate to Latin America. Because of the large number of submissions, these papers will be printed in two separate issues; this is Part 1. These papers show the wide variety of research, both theoretical and applied, that is currently being developed in the Sub-Continent.

Space industries and energy. Uchu sangyo to energy

Energy Technology Data Exchange (ETDEWEB)

Kishimoto, K [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan)

1991-09-05

The following items are described with the problem of assuring energy required in space as the main subject: (1) Supplying energy for transportation in the space has no other way but to depent on combustion of propulsion chemicals, for which liquefied hydrogen and liquefied oxygen preserved in the space would be most suitable. Energy required for spatial position adjustment of a flying object itself, life maintenance and substance manufacturing in the space would be supplied from electricity. (2) To summarize, satisfying the energy requirement in the space would require availability of electricity, hydrogen and oxygen. Electricity could be supplied from photovoltaic generation, but meeting an aggregate power requirement at a certain moment will require an auxiliary battery, for which again hydrogen and oxygen fuel cells would be used. A conception is proposed for the hydrogen and oxygen supply base in the space, that a plant will be built to manufacture hydrogen and oxygen from water transported from the earth using the solar heat. 2 figs.

Industry's Commercial Initiatives on ISS

Science.gov (United States)

Shields, C. E.; Kessler, C.; Lavitola, M. S.

2002-01-01

For more than ten years, private industry has worked to develop a commercial human space market and to create a sustainable ISS commercial utilization customer base. Before ISS assembly was underway - and long before NASA and the international space agencies began to craft ISS commercial business terms and conditions - industry planted and nurtured the seeds of interest in exploiting human space utilization for commerce. These early initiatives have yielded the impetus and framework for industry approaches to ISS commercial utilization today and for NASA's and the International Partners' planned accommodation of private sector interests and desires on the ISS. This paper chronicles major industry initiatives for commercial ISS utilization, emphasizing successful marketing and business approaches and why these approaches have a higher likelihood of success than others. It provides an overview of individual companies' initiatives, as well as collaborative efforts that cross company lines and country borders; and it assesses the relative success of each. Rather than emphasize negative issues and barriers, this paper characterizes and prioritizes actionable success factors for industry and government to make ISS commercial utilization a sustainable reality.

X-cephalometric study of different parts of the upper airway space and changes in hyoid position following mandibular fractures.

Science.gov (United States)

Chen, L-J; Zhao, M-C; Pan, X-F; Wei, Y-Q; Wang, D-Y

2013-09-01

This study analyses the different parts of the upper airway space and the changes in hyoid position. The results provide a clinical reference for developing timely and effective treatment programmes for patients with mandibular fractures caused by maxillofacial trauma. Standard X-cephalometric measurements of the lateral skull of 210 subjects were taken. The subjects were divided into four fracture groups: condylar, mandibular angle, mandibular body, and parasymphyseal. The radiographs of the mandibular fracture groups were compared with the normal occlusion group to analyse the upper airway space and the changes in hyoid position. Different types of fractures have different effects on the upper airway space. Bilateral mandibular body fracture and the parasymphyseal fracture have a significant influence on the lower oropharyngeal and laryngopharyngeal airway spaces, with serious obstructions severely restricting the ventilatory function of patients. Fractures at different parts of the mandibular structure are closely related to the upper airway and hyoid position.

Space Station needs, attributes and architectural options. Volume 2, book 1, part 3: Manned Space Station relevance to commercial telecommunications satellites

Science.gov (United States)

1983-01-01

A document containing a forecast of satellite traffic and revelant technology trends to the year 2000 was prepared which includes those space station capabilities and characteristics that should be provided to make the station useful to commercial satellite owners. The document was circulated to key representative organizations within the commercial telecommunications satellite and related communities of interest, including spacecraft manufacturers, commercial satellite owners, communications carriers, networks and risk insurers. The prospectus document is presented as well as the transmittal letter and the mailing list of the people and companies that were asked to review it. Key commercial telecommunications comments are summarized the actual response letters from the industry are included.

Post internship student-industry collaborative projects - as vehicle for the realization of challenging parts of the CDIO syllabus

DEFF Research Database (Denmark)

Jensen, Lotte Bjerregaard

2014-01-01

Architectural engineering the 5 month internship period is placed early in the curriculum, after 4 semesters of study. It is obviously more challenging to find industry internships for students that are at an early stage in their studies because they need more supervision. However the investment is worth...... the trouble because the post internship curriculum is provided with pedagogical means to address parts of the syllabus that are on an advanced level in the learning taxonomy. The interface between the internship period and post internship student-industry collaborative projects is an important point of focus...

Women and creation in the videogame industry in Spain: opportunities and difficulties in masculinized spaces

Directory of Open Access Journals (Sweden)

Aurora Méndez Martínez

2017-12-01

Full Text Available Video games are one of the first leisure alternatives in our society and generate millions of euros in profits annually. However, only 17% of its creators are women, which implies an important loss of creative capital and high economic gains that are not equitably distributed in a context of social inequality. Multiple factors, from the content of video games to the social environment, negatively influence women, creating a disaffection for video games. On the other hand, the masculinized environments and the lack of authority of the women around the videogames, curb the pretensions of the players to make the leap toward the professionalization in this industry. The objective of this article, through a bibliographical review, is to begin a research of the causes of the underrepresentation of women in the video game industry, in order to find solutions, create a more sustainable economy for Europe, an increase of equal spaces And greater job opportunities for women.

Desarrollo del diseño fluidodinámico de un filtro de mangas (tipo pulse - jet) para partículas minerales de origen industrial

OpenAIRE

Peralta Castillo, German; Barriga Rivera, Alfredo Nicolas

2009-01-01

El presente trabajo desarrolla el diseño fluidodinámico de un filtro de mangas para partículas minerales de origen industrial con su utilización en el control de la contaminación industrial del aire y como medio de recuperación de materia prima o de producto terminado, tratando de ajustar este diseño a las condiciones locales y a las necesidades de nuestro país. La primera parte versa sobre los fundamentos teóricos de la dinámica de partículas y del mecanismo de filtrado necesarios para de...

Use of social media and online tools for participative space education and citizen science in India: Perspectives of future space leaders

Science.gov (United States)

Khan, Aafaque; Sridhar, Apoorva

2012-07-01

The previous decade saw the emergence of internet in the new avatar popularly known as Web 2.0. After its inception, Internet (also known as Web 1.0) remained centralized and propriety controlled; the information was displayed in form of static pages and users could only browse through these pages connected via URLs (Unique Resource Locator), links and search engines. Web 2.0, on the other hand, has features and tools that allow users to engage in dialogue, interact and contribute to the content on the World Wide Web. As a Result, Social Media has become the most widely accepted medium of interactive and participative dialogue around the world. Social Media is not just limited to Social Networking; it extends from podcasts, webcasts, blogs, micro-blogs, wikis, forums to crowd sourcing, cloud storage, cloud computing and Voice over Internet Protocol. World over, there is a rising trend of using Social Media for Space Education and Outreach. Governments, Space Agencies, Universities, Industry and Organizations have realized the power of Social Media to communicate advancement of space science and technology, updates on space missions and their findings to the common man as well as to the researchers, scientists and experts around the world. In this paper, the authors intend to discuss, the perspectives, of young students and professionals in the space industry on various present and future possibilities of using Social Media in space outreach and citizen science, especially in India and other developing countries. The authors share a vision for developing Social Media platforms to communicate space science and technology, along innovative ideas on participative citizen science projects for various space based applications such as earth observation and space science. Opinions of various young students and professionals in the space industry from different parts of the world are collected and reflected through a comprehensive survey. Besides, a detailed study and

13 CFR 127.500 - In what industries is a contracting officer authorized to restrict competition under this part?

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false In what industries is a contracting officer authorized to restrict competition under this part? 127.500 Section 127.500 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION WOMEN-OWNED SMALL BUSINESS FEDERAL CONTRACT...

Lean and Virginia's wood industry - Part II: Results and need for support

Directory of Open Access Journals (Sweden)

Christian F. Fricke

2012-11-01

Full Text Available This two-part publication about Lean practices by Viriginia’s wood products and furniture manufacturing industries reports results from researching the awareness, the implementation status, the business results, and the need for external implementation support of Virginian companies. This second manuscript focuses on business results and the need for external implementation support. Except for “sales per employee,” where less than half of respondents reported an improvement due to the implementation of Lean in their operation, a majority of respondents indicated improved business results for “lead time,” “on-time delivery,” “inventory turnover,” and “cost per unit.” With respect to the need for external Lean implementation support, only 23 percent of respondents answered in the affirmative. “Training management,” “training shop floor employees,” and “implementing [Lean] with extensive employee involvement” were, with 67, 58, and 48 percent frequencies, the most often named forms of Lean implementation support requested. Results from this study seem to indicate an opportunity to support the well-being of Virginia’s wood products and furniture manufacturing industries through improved communication of the benefits of Lean and offering specific types of training to companies.

Institutional Venture Capital for the Space Industry: Providing Risk Capital for Space Companies that Provide Investor Returns

Science.gov (United States)

Moore, Roscoe M., III

2002-01-01

provided by an institution. Those institutions tend to be Banks, Pension Funds, Insurance Funds, Corporations, and other incorporated entities that are obligated to earn a return on their invested capital. These institutions invest in a venture capital firm for the sole purpose of getting their money back with a healthy profit - within a set period of time. The venture capital firm is responsible for investing in and managing companies whose risk and return are higher than other less risky classes of investment. The venture capital firm's primary skill is its ability to manage the high risk of its venture investments while maintaining the high return potential of its venture investments. to businesses for the purpose of providing the above-mentioned Institutions a substantial return on their invested capital. Institutional Venture Capital for the Space Industry cannot be provided to projects or companies whose philosophy or intention is not to increase shareholder equity value within a set time period. efficiently when tied up in companies that intend to spend billions of dollars before the first dollar of revenue is generated. If 2 billion dollars of venture capital is invested in the equity of a Space Company for a minority equity position, then that Space Company must build that minority shareholder's equity value to a minimum investment return of 4 to 8 billion dollars. There are not many start-up companies that are able to reach public market equity valuations in the tens of billions of dollars within reasonable time horizons. Foundations, Manufacturers, and Strategic Investors can invest in projects that cannot realistically provide a substantial return on their equity to their investors within a reasonable period (5-7 years) of time. Venture Capitalists have to make money. Venture capitalists have made money on Satellite Television, Satellite Radio, Fixed Satellite Services, and other businesses. Venture capitalists have not made money on stand

Graphite epoxy composite degradation by space radiation

International Nuclear Information System (INIS)

Taheri, M.; Sandquist, G.M.; Slaughter, D.M.; Bennion, J.

1991-01-01

The radiation environment in space is a critical consideration for successful operation in space. All manned space missions with a duration of more than a few days are subjected to elevated ionizing radiation exposures, which are a threat to both personnel and structures in space. The increasing demands for high-performance materials as structural components in the aerospace, aircraft, and defense industries have led to the development of materials such as graphite fiber-reinforced, epoxy resin matrix composites (Gr/Ep). These materials provide important advantages over conventional structural materials, such as ultrahigh specific strength, enhanced specific moduli, and better fatigue resistance. The fact that most advanced composite materials under cyclic fatigue loading evidence little or no observable crack growth prior to rapid fracture suggests that for fail-safe considerations of parts subject to catastrophic failure, a detailed evaluation of radiation damage from very energetic particle is crucial. The Gr/Ep components are believed to suffer severe degradation in space due to highly penetrating secondary radiation, mainly from neutrons and protons. Investigation into the performance and stability of Gr/Ep materials are planned

Commercial opportunities utilizing the International Space Station

Science.gov (United States)

Kearney, Michael E.; Mongan, Phil; Overmyer, Carolyn M.; Jackson, Kenneth

1998-01-01

The International Space Station (ISS) has the unique capability of providing a low-g environment for both short- and long-duration experimentation. This environment can provide a unique and competitive research capability to industry; but until recently, utilization of this environment by the private sector has been limited if not totally unavailable. NASA has recently expressed an interest in the commercial development of space and this is now an integral part of the Agency's enabling legislation through the Space Act. NASA's objective is to foster the use of the space environment for the development of commercial products and processes. Through alliances and agreements with several commercial companies and universities, SPACEHAB, Inc., has built a comprehensive package of services designed to provide low-cost reliable access to space for experimenters. These services provide opportunities to support engineering test beds for materials exposure analysis, to mitigate structural failures as observed on the Hubble Space Telescope; materials processing, remote sensing; space environment definition; and electronic experiments. The intent of this paper is to identify commercial opportunities for utilizing the International Space Station and provide examples of several facilities currently being designed and manufactured by commercial companies with the purpose of providing access to the space environment for commercial users.

High repetition ration solid state switched CO2 TEA laser employed in industrial ultrasonic testing of aircraft parts

Science.gov (United States)

von Bergmann, Hubertus; Morkel, Francois; Stehmann, Timo

2015-02-01

Laser Ultrasonic Testing (UT) is an important technique for the non-destructive inspection of composite parts in the aerospace industry. In laser UT a high power, short pulse probe laser is scanned across the material surface, generating ultrasound waves which can be detected by a second low power laser system and are used to draw a defect map of the part. We report on the design and testing of a transversely excited atmospheric pressure (TEA) CO2 laser system specifically optimised for laser UT. The laser is excited by a novel solid-state switched pulsing system and utilises either spark or corona preionisation. It provides short output pulses of less than 100 ns at repetition rates of up to 1 kHz, optimised for efficient ultrasonic wave generation. The system has been designed for highly reliable operation under industrial conditions and a long term test with total pulse counts in excess of 5 billion laser pulses is reported.

Workshop on Research for Space Exploration: Physical Sciences and Process Technology

Science.gov (United States)

Singh, Bhim S.

1998-01-01

This report summarizes the results of a workshop sponsored by the Microgravity Research Division of NASA to define contributions the microgravity research community can provide to advance the human exploration of space. Invited speakers and attendees participated in an exchange of ideas to identify issues of interest in physical sciences and process technologies. This workshop was part of a continuing effort to broaden the contribution of the microgravity research community toward achieving the goals of the space agency in human exploration, as identified in the NASA Human Exploration and Development of Space (HEDS) strategic plan. The Microgravity program is one of NASA'a major links to academic and industrial basic research in the physical and engineering sciences. At present, it supports close to 400 principal investigators, who represent many of the nation's leading researchers in the physical and engineering sciences and biotechnology. The intent of the workshop provided a dialogue between NASA and this large, influential research community, mission planners and industry technical experts with the goal of defining enabling research for the Human Exploration and Development of Space activities to which the microgravity research community can contribute.

Logistics: An integral part of cost efficient space operations

Science.gov (United States)

Montgomery, Ann D.

1996-01-01

The logistics of space programs and its history within NASA are discussed, with emphasis on manned space flight and the Space Shuttle program. The lessons learned and the experience gained during these programs are reported on. Key elements of logistics are highlighted, and the problems and issues that can be expected to arise in relation to the support of long-term space operations and future space programs, are discussed. Such missions include the International Space Station program and the reusable launch vehicle. Possible solutions to the problems identified are outlined.

Economy of conservation options in industry and developed environment. Part 2

International Nuclear Information System (INIS)

1994-03-01

To determine the optimal situation for the energy supply in the working area of the IJsselmij and Sep the study on the title subject was carried out. To influence the energy demand demand-side management (DSM) as part of integrated resource planning (IRP) is applied. Several scenarios to determine whether new production capacity must be installed or conservation options and activities should be realized are elaborated and calculated by means of the COMPASS model. E3T compiled input data for the demand-side of the model: energy consumption and energy conservation, investment cost and operational cost per user, number of installations and the development of the penetration of the conservation options between 1990 and 2010, and required subsidies and promotional costs of the IJsselmij to introduce such options. Six of the options were selected and elaborated in detail. The results are presented in this report for the options: coverage of cooling and freezing equipment at night, frequency control of electric motors, decentralized heat production by means of advanced burners, indoor climate control in the built environment, reflectors for TL-lighting systems in the built environment, and behavioral change in industrial companies. In part 1 an overview is given of the economics, the selection and elaboration of the energy conservation options. 9 figs., 53 tabs., 71 refs., 1 appendix

Analysis of Energy Industry Upgrading in Northeast China

Science.gov (United States)

Liu, Xiao-jing; Ji, Yu-liang; Guan, Bai-feng; Jing, Xin

2018-02-01

Promoting regional economic growth and realizing the transformation of the mode of economic growth are in industrial upgrading essence The product is a carrier that represents a series of links of production, management and marketing behind the enterprise, and is a comprehensive reflection of the knowledge and ability of a country or region. Based on the industrial spatial structure, this paper visualizes the industrial space in Northeast China from 2005 to 2015, analyzes the comparative advantages of the energy industry in Northeast China, and examines the status quo of the upgrade of the energy industry according to the industrial upgrading status. Based on the industrial spatial structure, Industry intensity in the industrial space, put forward the future direction of the energy industry upgrade and upgrade path.

Development of advanced technology for stable support of Korean style space foods by the collaboration with an industry

International Nuclear Information System (INIS)

Lee, Ju Woon; Byun, Myung Woo; Kim, Jae Hun; Song, Beom Suk; Choi, Jong Il; Park, Jin Kyu; Park, Jae Nam

2007-06-01

Keeping pace with the space era of 21 century, Korea gets an opportunity to participate in a project in which the manned spaceship and the international space station will be developed. The Korean astronaut program is so the first step to open a new field of space development project that needs many researches and experiments to implement the mission successfully. Because food is an important part of life, it is imperative that the space food system is the best it can be. The supply of food must be nourishing and tasty so astronauts maintain their health during their important stays in space. Therefore, this study was conducted to develop space foods maintaining microbial safety and sensory characteristics, and the objective is to produce basic information about the processing technology of space foods. The results showed that combination treatment of radiation technology might be helpful for extending the space foods such as space Kimchi. And the development of a new herbal preparation (HemoHIM) for immune and hematopoiesis modulation as well as oxidative damage inhibition in space environment might be helpful for improving the astronaut's health

Development of advanced technology for stable support of Korean style space foods by the collaboration with an industry

Energy Technology Data Exchange (ETDEWEB)

Lee, Ju Woon; Byun, Myung Woo; Kim, Jae Hun; Song, Beom Suk; Choi, Jong Il; Park, Jin Kyu; Park, Jae Nam

2007-06-15

Keeping pace with the space era of 21 century, Korea gets an opportunity to participate in a project in which the manned spaceship and the international space station will be developed. The Korean astronaut program is so the first step to open a new field of space development project that needs many researches and experiments to implement the mission successfully. Because food is an important part of life, it is imperative that the space food system is the best it can be. The supply of food must be nourishing and tasty so astronauts maintain their health during their important stays in space. Therefore, this study was conducted to develop space foods maintaining microbial safety and sensory characteristics, and the objective is to produce basic information about the processing technology of space foods. The results showed that combination treatment of radiation technology might be helpful for extending the space foods such as space Kimchi. And the development of a new herbal preparation (HemoHIM) for immune and hematopoiesis modulation as well as oxidative damage inhibition in space environment might be helpful for improving the astronaut's health.

Industrial Dynamics and Economic Geography

NARCIS (Netherlands)

Capasso, Marco|info:eu-repo/dai/nl/314016627; Stam, Erik|info:eu-repo/dai/nl/215649370; Cefis, Elena|info:eu-repo/dai/nl/274516233

2015-01-01

Capasso M., Stam E. and Cefis E. Industrial dynamics and economic geography, Regional Studies. How do industries emerge and evolve over space? In this special issue the fields of industrial dynamics and economic geography are brought together in order to achieve a richer and more fundamental

From the Shuttle to the Lab, NPS Alumni Look for Solutions to Today’s Space Challenges

OpenAIRE

Naval Postgraduate School Public Affairs Office

2011-01-01

Naval Postgraduate School alumni and former astronauts Kent Rominger and Ken Reightler have seen time change a lot of things. The shuttle program is at its end, their days as astronauts with NASA are behind them, and they are now part of the ever-evolving commercial space industry. But the thing that hasn’t changed – the one certainty of space travel and exploration – there will always be challenges that need solutions.

What the growth of a space tourism industry could contribute to employment, economic growth, environmental protection, education, culture and world peace

Science.gov (United States)

Collins, Patrick; Autino, Adriano

2010-06-01

The authors argue that the creation of a popular new industry of passenger space travel could be economically and socially very beneficial in creating new employment in aerospace and related fields in order to supply these services. In doing so, the application of nearly a half-century of technological development that has yet to be used commercially could create many new aerospace engineering business opportunities. In addition, by growing to large scale, space tourism has unique potential to reduce the cost of space travel sharply, thereby making many other activities in space feasible and profitable. The paper discusses the scope for new employment, stimulating economic growth, reducing environmental damage, sustaining education particularly in the sciences, stimulating cultural growth, and preserving peace by eliminating any need for "resource wars".

Systems engineering, systems thinking, and learning a case study in space industry

CERN Document Server

Moser, Hubert Anton

2014-01-01

This book focuses on systems engineering, systems thinking, and how that thinking can be learned in practice. It describes a novel analytical framework based on activity theory for understanding how systems thinking evolves and how it can be improved to support multidisciplinary teamwork in the context of system development and systems engineering. This method, developed using data collected over four years from three different small space systems engineering organizations, can be applied in a wide variety of work activities in the context of engineering design and beyond in order to monitor and analyze multidisciplinary interactions in working teams over time. In addition, the book presents a practical strategy called WAVES (Work Activity for a Evolution of Systems engineering and thinking), which fosters the practical learning of systems thinking with the aim of improving process development in different industries. The book offers an excellent resource for researchers and practitioners interested in system...

21 reports of future industry

International Nuclear Information System (INIS)

2001-02-01

This book deals with 21 reports on future industry, which contain revolution of digital educations, genetic engineering, the newest medical device, environmental industry, artificial intelligence, virtual reality, bio-green revolution, energy of the future, advanced concept computer, e-commerce, digital cash, game industry, information technology for future, next DRAM, information protection industry, robot to replace manpower, medium for information display, navigation systems, a space development, design industry and, home automation.

Ecological Impacts of the Space Shuttle Program at John F. Kennedy Space Center, Florida

Science.gov (United States)

Hall, Carlton R.; Schmalzer, Paul A.; Breininger, David R.; Duncan, Brean W.; Drese, John H.; Scheidt, Doug A.; Lowers, Russ H.; Reyier, Eric A.; Holloway-Adkins, Karen G.; Oddy, Donna M.;

BEOS-A new approach to promote and organize industrial ISS utilization

Science.gov (United States)

Luttmann, Helmut; Buchholz, Henning; Bratke, Burkhard; Hueser, Detlev; Dittus, Hansjörg

2000-01-01

In order to develop and to market innovative services and products for the operation of the ISS and its utilization, three players have teamed up together and established an entity called BEOS (Bremen Engineering Operations Science). The team is made up of DaimlerChrysler Aerospace, OHB-System and ZARM, the Center of Applied Space Technology and Microgravity at the University of Bremen. It is the aim of BEOS to represent a competent industrial interface to potential ISS users from the space and non-space industries. In this effort BEOS is supporting and supplementing the activities of the space agencies, especially in the field of industrial and/or commercial ISS utilization. With this approach BEOS is creating new business opportunities not only for its team members but also for its customers from industry. Besides the fostering of industrial research in space, nontechnical fields of space utilization like entertainment, advertisement, education and space travel represent further key sectors for the marketing efforts of BEOS. .

Space Station Workshop: Commercial Missions and User Requirements

Science.gov (United States)

1988-01-01

The topics of discussion addressed during a three day workshop on commercial application in space are presented. Approximately half of the program was directed towards an overview and orientation to the Space Station Project; the technical attributes of space; and present and future potential commercial opportunities. The remaining time was spent addressing technological issues presented by previously-formed industry working groups, who attempted to identify the technology needs, problems or issues faced and/or anticipated by the following industries: extraction (mining, agriculture, petroleum, fishing, etc.); fabrication (manufacturing, automotive, aircraft, chemical, pharmaceutical and electronics); and services (communications, transportation and retail robotics). After the industry groups presented their technology issues, the workshop divided into smaller discussion groups composed of: space experts from NASA; academia; industry experts in the appropriate disciplines; and other workshop participants. The needs identified by the industry working groups, space station technical requirements, proposed commercial ventures and other issues related to space commercialization were discussed. The material summarized and reported are the consensus from the discussion groups.

The effects of occupational noise on blood pressure and heart rate of workers in an automotive parts industry.

Science.gov (United States)

Kalantary, Saba; Dehghani, Ali; Yekaninejad, Mir Saeed; Omidi, Leila; Rahimzadeh, Mitra

2015-07-01

One of the most important impacts of industrial noise is physiological and psychological effects. The increases in workers' blood pressure and heart rate were detected during and after exposure to high levels of noise. The objectives of this research were to determine whether the noise exposures have any effects on blood pressure and heart rate of workers in the automotive parts industry. This case study was done in 2011 at different units of an automotive parts manufacturing in Tehran. Sound pressure level was measured at different units of the factory with a calibrated instrument. Demographic features of workers were gathered with an appropriate questionnaire. Heart rate and blood pressure were measured twice in a day in the start time of work day (before exposure to noise) and middle shift hours (during exposure to noise) in the occupational physician office. For analyzing data, chi-square, independent sample t-test, paired t-test, and analysis of covariance (ANCOVA) were used. P industrial noise may increase the heart rate of workers. Although rises in heart rate, systolic, and diastolic blood pressure of workers in the case group were observed after exposure to noise, the values of heart rate, systolic, and diastolic blood pressure were in the normal range. Further experimental investigations are needed to determine the relationships between these variables.

Myth-free space advocacy part I-The myth of innate exploratory and migratory urges

Science.gov (United States)

Schwartz, James S. J.

2017-08-01

This paper discusses the ;myth; that we have an innate drive to explore or to migrate into space. Three interpretations of the claim are considered. According to the ;mystical interpretation,; it is part of our ;destiny; as humans to explore and migrate into space. Such a claim has no rational basis and should play no role in rationally- or evidence-based space advocacy. According to the ;cultural interpretation,; exploration and migration are essential features of human culture and society. These are not universal features because there are cultures and societies that have not encouraged exploration and migration. Moreover, the cultures that have explored have seldom conducted exploration for its own sake. According to the ;biological interpretation; there is a psychological or genetic basis for exploration or migration. While there is limited genetic evidence for such a claim, that evidence suggests that genes associated with exploratory behavior were selected for subsequent to migration, making it unlikely that these genes played a role in causing migration. In none of these senses is it clearly true that we have an innate drive to explore or migrate into space; and even if we did it would be fallacious to argue that the existence of such a drive justified spaceflight activities.

Neutron dose study with bubble detectors aboard the International Space Station as part of the Matroshka-R experiment

International Nuclear Information System (INIS)

Machrafi, R.; Garrow, K.; Ing, H.; Smith, M. B.; Andrews, H. R.; Akatov, Yu; Arkhangelsky, V.; Chernykh, I.; Mitrikas, V.; Petrov, V.; Shurshakov, V.; Tomi, L.; Kartsev, I.; Lyagushin, V.

2009-01-01

As part of the Matroshka-R experiments, a spherical phantom and space bubble detectors (SBDs) were used on board the International Space Station to characterise the neutron radiation field. Seven experimental sessions with SBDs were carried out during expeditions ISS-13, ISS-14 and ISS-15. The detectors were positioned at various places throughout the Space Station, in order to determine dose variations with location and on/in the phantom in order to establish the relationship between the neutron dose measured externally to the body and the dose received internally. Experimental data on/in the phantom and at different locations are presented. (authors)

Analysis of precious metals at parts-per-billion levels in industrial applications

International Nuclear Information System (INIS)

Tickner, James; O'Dwyer, Joel; Roach, Greg; Smith, Michael; Van Haarlem, Yves

2015-01-01

Precious metals, including gold and the platinum group metals (notable Pt, Pd and Rh), are mined commercially at concentrations of a few parts-per-million and below. Mining and processing operations demand sensitive and rapid analysis at concentrations down to about 100 parts-per-billion (ppb). In this paper, we discuss two technologies being developed to meet this challenge: X-ray fluorescence (XRF) and gamma-activation analysis (GAA). We have designed on-stream XRF analysers capable of measuring targeted elements in slurries with precisions in the 35–70 ppb range. For the past two years, two on-stream analysers have been in continuous operation at a precious metals concentrator plant. The simultaneous measurement of feed and waste stream grades provides real-time information on metal recovery, allowing changes in operating conditions and plant upsets to be detected and corrected more rapidly. Separately, we have been developing GAA for the measurement of gold as a replacement for the traditional laboratory fire-assay process. High-energy Bremsstrahlung X-rays are used to excite gold via the 197 Au(γ,γ′) 197 Au-M reaction, and the gamma-rays released in the decay of the meta-state are then counted. We report on work to significantly improve accuracy and detection limits. - Highlights: • X-ray fluorescence analysis at sub-parts-per-million concentration in bulk materials. • Gamma activation analysis of gold at high accuracy and low concentrations. • Use of advanced Monte Carlo techniques to optimise radiation-based analysers. • Industrial application of XRF and GAA technologies for minerals processing.

Industries and environment - 2014 edition

International Nuclear Information System (INIS)

Maurice, Delphine

2014-04-01

After a general overview of the French economic context (composition of the French industry, the manufacturing industry, industry production and trade balance), this report presents industrial installations with risks: installations classified for the protection of the environment and submitted to industrial authorizations (ICPEA), basic nuclear installations, Seveso industrial facilities, IPPC industrial installations. The next part analyzes the various pressures exerted by the industry on the environment: material production and consumption, water taking, consumption of energetic products, release of pollutants in waters of industrial ICPE, releases in the air, greenhouse gas emissions, production of wastes, accidents and incidents with environmental consequences, polluted sites and soils, hazardous chemical products in the industry, industrial companies involved in nano-technologies and nano-materials. The last part proposes an overview of responses to these issues: implementation of environmental management system, corporate societal responsibility, investments and expenditures for the protection of the environment, industrial eco-activities, eco-labelled products manufactured by the industry

Space construction system analysis. Part 2: Cost and programmatics

Science.gov (United States)

Vonflue, F. W.; Cooper, W.

1980-01-01

Cost and programmatic elements of the space construction systems analysis study are discussed. The programmatic aspects of the ETVP program define a comprehensive plan for the development of a space platform, the construction system, and the space shuttle operations/logistics requirements. The cost analysis identified significant items of cost on ETVP development, ground, and flight segments, and detailed the items of space construction equipment and operations.

Saudi Arabia: petroleum industry review

International Nuclear Information System (INIS)

Shammas, Pierre

2000-01-01

A comprehensive review is provided of Saudi Arabia's petroleum industry covering oil and gas exploration and production, refining, oil and gas trade, marketing and Saudi overseas investments. Profiles of key Saudi decision makers are provided. A statistical appendix includes data from the start of oil production in Saudi Arabia in 1938. Part I Geological potential; Part II The Saudi energy economy; Part III Production capacity; Part IV The oil refining sector ; Part V Exports and logistics; Part VI Overseas petroleum industry investments; Part VII The decision makers; Part VIII Statistical Appendix; Reserves, Production, Exports, Prices 1950 to 1999. (Author)

Just in Time in Space or Space Based JIT

Science.gov (United States)

VanOrsdel, Kathleen G.

1995-01-01

Our satellite systems are mega-buck items. In today's cost conscious world, we need to reduce the overall costs of satellites if our space program is to survive. One way to accomplish this would be through on-orbit maintenance of parts on the orbiting craft. In order to accomplish maintenance at a low cost I advance the hypothesis of having parts and pieces (spares) waiting. Waiting in the sense of having something when you need it, or just-in-time. The JIT concept can actually be applied to space processes. Its definition has to be changed just enough to encompass the needs of space. Our space engineers tell us which parts and pieces the satellite systems might be needing once in orbit. These items are stored in space for the time of need and can be ready when they are needed -- or Space Based JIT. When a system has a problem, the repair facility is near by and through human or robotics intervention, it can be brought back into service. Through a JIT process, overall system costs could be reduced as standardization of parts is built into satellite systems to facilitate reduced numbers of parts being stored. Launch costs will be contained as fewer spare pieces need to be included in the launch vehicle and the space program will continue to thrive even in this era of reduced budgets. The concept of using an orbiting parts servicer and human or robotics maintenance/repair capabilities would extend satellite life-cycle and reduce system replacement launches. Reductions of this nature throughout the satellite program result in cost savings.

General Industrial Electronics. Oklahoma Trade and Industrial Education.

Science.gov (United States)

Harwick, Jim; Siebert, Leo

This curriculum guide, part of a series of curriculum guides dealing with industrial electricity and electronics, is designed for use in teaching a course in general industrial electronics. Covered in the first half of the guide are units on the following electronic components: semiconductors, solid-state diodes, bipolar transistors, and special…

A strategy for investment in space resource utilization

Science.gov (United States)

Mendell, Wendell W.

During the first quarter of the next Century, space transportation systems will be capable of routine flights of humans and cargo to the Moon. The general acceptance of permanent human presence in space, as exemplified by at least two manned stations in LEO at that time, will lead to one or more staffed outposts on the Moon. Whether such outposts evolve into sustained, growing settlements will depend, in part, on whether the economic context attracts substantial private investment. A planetary surface provides a material and gravitational environment distinct from that of an orbiting space station and thus provides a setting familiar to non-aerospace sectors of terrestrial industry. Examination of current trends in terms of historical processes which operate on new frontiers suggests that the limited markets and unfamiliar technologies associated with space commercialization today may change dramatically in 20 years when lunar resources are accessible. However, the uncertainty and vagueness of such projections discourages investment at a useful scale unless a strategy for technology development can be implemented which provides tangible and marketable benefits in the intermediate term. At the present time technologies can be identified (a) that will be required (and therefore valuable) at the time of lunar settlement and (b) whose development can be planned to yield marketable intermediate products on Earth. Formation of pre-competitive, collaborative research consortia in the industrial sector could reduce technical and economic risk in the early stages and could promote a favorable political environment for the future growth of space activities.

Available forest biomass for new energetic and industrial prospects. Part 1: analysis and synthesis of existing studies compiled at the international level. Part 2: volume calculations. Part 3: economic part. Final report

International Nuclear Information System (INIS)

2007-01-01

Motivated by new energetic constraints and the interest of biomass, the authors report a bibliographical survey of studies concerning the evaluation of the available forest biomass. They comment the geographical and time distribution of the identified and compiled studies. They analyse their different topics. Then, they discuss the various field hypotheses, discuss and comments various resource assessment methodologies. They comment the resource the French forest can be, present a synthesis of the available resource at the regional level according to the different studies. They propose a review of some technical-economical aspects (costs, energy cost, price evolutions, improvement of the wood-energy mobilization). The second part proposes a whole set of volume calculations for different forest types (clusters or plantations of trees, copses, sawmills products), for industry and household consumption. It discusses the available volumes with respect to accessibility, additional available volumes, and possible improvements. The third part analyses, comments and discusses the wood market and wood energetic uses, and the possible supply curves for wood energetic uses by 2016

The twenty-first century commercial space imperative

CERN Document Server

Young, Anthony

2015-01-01

Young addresses the impressive expansion across existing and developing commercial space business markets, with multiple private companies competing in the payload launch services sector. The author pinpoints the new markets, technologies, and players in the industry, as well as highlighting the overall reasons why it is important for us to develop space. NASA now relies on commercial partners to supply cargo and crew spacecraft and services to and from the International Space Station. The sizes of satellites are diminishing and their capabilities expanding, while costs to orbit are decreasing. Suborbital space tourism holds the potential of new industries and jobs. Commercial space exploration of the Moon and the planets also holds promise. All this activity is a catalyst for anyone interested in joining the developing space industry, from students and researchers to engineers and entrepreneurs. As more and more satellites and rockets are launched and the business of space is expanding at a signifi...

Economic consequences of commercial space operations

Science.gov (United States)

Stone, Barbara A.; Wood, Peter W.

1990-01-01

The potential economic benefits generated from increased industry involvement and investment in space activities and the subsequent cost implications are discussed. A historical overview of commercial industry involvement in space is given and sources of new economic growth in space are discussed. These include communications satellites, small satellites, positioning and navigation services, space transportation and infrastructure, remote sensing, and materials processing in space such as the manufacturing of protein crystals and zeolites. Macroeconomic trends and principles such as limits on technology trade, eased restrictions on international joint ventures, foreign investments in U.S. firms, and increased foreign competition are discussed. Earth observations and mapping are considered. Opportunities for private sector involvement in building space infrastructure and space transportation are highlighted.

INDUSTRIAL ENTERPRISE TAX PLANNING AS PART OF EXPENSE OPTIMIZATION STRATEGY

Directory of Open Access Journals (Sweden)

A. P. Garnov

2012-01-01

Full Text Available Tax liability planning is vital for industrial enterprises to reduce their tax burden and thus reduce expenses of the organization for a certain period. Industrial enterprises are among main taxpayers in the Russian Federation, and recommendations given in the article on topical issues relatedto planning of tax obligations will help top managers of the enterprises to avoid unnecessary financial losses and to ensure further growth and development of their organizations. Attention is focused on specifics of the industrial enterprises’ activities under present conditions due to thenature and particular features of their operation.

Australian mineral industry annual review for 1982

Energy Technology Data Exchange (ETDEWEB)

1984-01-01

The Australian mineral industry annual review records the activities and development of the Australian mineral industry and reports production, consumption, treatment, trade, prices, new developments, exploration and resources for mineral commodities including fuels, and summarises equivalent developments abroad. The present volume reviews activities and developments in 1982. Part 1 (General Review) - after briefly surveying the world mineral industry, summarises developments in the Australian mineral industry as a whole, under the headings: the industry in the national economy; important recent developments; production; overseas trade; prices; exploration expenditure; investment; income tax; royalties; structural data; wages and salaries; industrial disputes; and government assistance, legislation and controls. Part 2 (Commodity Review) - covers industrial mineral commodities, from abrasives to zirconium. Part 3 (Mining Census) - tabulates statistics extracted from the mining census, together with some mineral processing statistics from the manufacturing census. Part 4 (Miscellaneous) - tabulates quantum and value data on mineral output provided by State departments of mines and their equivalents.

Evolutionary space platform concept study. Volume 2, part B: Manned space platform concepts

Science.gov (United States)

1982-01-01

Logical, cost-effective steps in the evolution of manned space platforms are investigated and assessed. Tasks included the analysis of requirements for a manned space platform, identifying alternative concepts, performing system analysis and definition of the concepts, comparing the concepts and performing programmatic analysis for a reference concept.

Salary administration as part of employee incentive system at industrial enterprises

Directory of Open Access Journals (Sweden)

Sagandykov Michail

2017-01-01

Full Text Available The article analyses the financial staff incentives at industrial enterprises. The paper concludes that the incentive system should be developed taking into account the developed staff motivation. The only efficient target of influence is the existing staff motivation components. A 3-element employee incentive framework for industrial enterprises is suggested. The article presents the critical analysis of the existing payroll systems of several industrial enterprises, elicits the common flaws of the incentive payments, and develops requirements for such systems. The paper also provides an industrial enterprise needs matrix and an incentive payment types matrix required to build up a rational monetary staff incentive system. These matrices can be adapted for any industrial enterprise with regard to its long-term objectives.

Corrosion and anticorrosion. Industrial practice

International Nuclear Information System (INIS)

Beranger, G.; Mazille, H.

2002-01-01

This book comprises 14 chapters written with the collaboration of about 50 French experts of corrosion. It is complementary to another volume entitled 'corrosion of metals and alloys' and published by the same editor. This volume comprises two parts: part 1 presents the basic notions of corrosion phenomena, the properties of surfaces, the electrochemical properties of corrosion etc.. Part 2 describes the most frequent forms of corrosion encountered in industrial environments and corresponding to specific problems of protection: marine environment, atmospheric corrosion, galvanic corrosion, tribo-corrosion, stress corrosion etc.. The first 8 chapters (part 1) treat of the corrosion problems encountered in different industries and processes: oil and gas production, chemical industry, phosphoric acid industry, PWR-type power plants, corrosion of automobile vehicles, civil engineering and buildings, corrosion of biomaterials, non-destructive testing for the monitoring of corrosion. The other chapters (part 2) deal with anticorrosion and protective coatings and means: choice of materials, coatings and surface treatments, thick organic coatings and enamels, paints, corrosion inhibitors and cathodic protection. (J.S.)

Enabling Sustainable Exploration through the Commercial Development of Space

Science.gov (United States)

Nall, Mark; Casas, Joseph

2003-01-01

The commercial development of space offers enabling benefits to space exploration. This paper examines how those benefits can be realized, and how the Space Product Development Office of the National Aeronautics and Space Administration is taking the first steps towards opening the space frontier through vital and sustainable industrial development. The Space Product Development Office manages 15 Commercial Space Centers that partner with US industry to develop opportunities for commerce in space. This partnership directly benefits NASA exploration in four primary ways. First, by actively involving traditional and non-traditional companies in commercial space activities, it seeks and encourages to the maximum extent possible the fullest commercial use of space, as directed by NASA's charter. Second, the commercial research and technologies pursued and developed in the program often have direct applicability to NASA priority mission areas. This dual use strategy for research and technology has the potential to greatly expand what the NASA scientific community can do. Third, the commercial experiment hardware developed by the Commercial Space Centers and their industrial partners is available for use by NASA researchers in support of priority NASA research. By utilizing low cost and existing commercial hardware, essential NASA research can be more readily accomplished. Fourth, by assisting industry in understanding the use of the environment of space and in helping industry enhance the tools and technologies for NASA and commercial space systems, the market for commercial space utilization and the capability for meeting the future growing market needs is being developed. These two activities taken together form the beginning of a new space economy that will enable sustainable NASA exploration of the universe.

Conference on Intelligent Robotics in Field, Factory, Service, and Space (CIRFFSS 1994), volume 1

Science.gov (United States)

Erickson, Jon D. (Editor)

1994-01-01

The AIAA/NASA Conference on Intelligent Robotics in Field, Factory, Service, and Space (CIRFFSS '94) was originally proposed because of the strong belief that America's problems of global economic competitiveness and job creation and preservation can partly be solved by the use of intelligent robotics, which are also required for human space exploration missions. Individual sessions addressed nuclear industry, agile manufacturing, security/building monitoring, on-orbit applications, vision and sensing technologies, situated control and low-level control, robotic systems architecture, environmental restoration and waste management, robotic remanufacturing, and healthcare applications.

INDUSTRIAL ENTERPRISE TAX PLANNING AS PART OF EXPENSE OPTIMIZATION STRATEGY

Directory of Open Access Journals (Sweden)

A. P. Garnov

2012-01-01

Full Text Available Tax liability planning is vital for industrial enterprises to reduce their tax burden and thus reduce expenses of the organization for a certain period. Industrial enterprises are among main taxpayers in the Russian Federation, and recommendations given in the article on topical issues related to planning of tax obligations will help top managers of the enterprises to avoid unnecessary financial losses and to ensure further growth and development of their organizations. Attention is focused on specifics of the industrial enterprises’ activities under present conditions due to the nature and particular features of their operation.

Commercialization is Required for Sustainable Space Exploration and Development

Science.gov (United States)

Martin, Gary L.; Olson, John M.

2009-01-01

The U.S. Space Exploration policy outlines an exciting new direction in space for human and robotic exploration and development beyond low Earth orbit. Pressed by this new visionary guidance, human civilization will be able to methodically build capabilities to move off Earth and into the solar system in a step-by-step manner, gradually increasing the capability for humans to stay longer in space and move further away from Earth. The new plans call for an implementation that would create an affordable and sustainable program in order to span over generations of explorers, each new generation pushing back the boundaries and building on the foundations laid by the earlier. To create a sustainable program it is important to enable and encourage the development of a selfsupporting commercial space industry leveraging both traditional and non-traditional segments of the industrial base. Governments will not be able to open the space frontier on their own because their goals change over relatively short timescales and because the large costs associated with human spaceflight cannot be sustained. A strong space development industrial sector is needed that can one day support the needs of commercial space enterprises as well as provide capabilities that the National Aeronautics and Space Administration (NASA) and other national space agencies can buy to achieve their exploration goals. This new industrial space sector will someday provide fundamental capabilities like communications, power, logistics, and even cargo and human space transportation, just as commercial companies are able to provide these services on Earth today. To help develop and bolster this new space industrial sector, NASA and other national space agencies can enable and facilitate it in many ways, including reducing risk by developing important technologies necessary for commercialization of space, and as a paying customer, partner, or anchor tenant. This transition from all or mostly government

A Code of Ethics and Standards for Outer-Space Commerce

Science.gov (United States)

Livingston, David M.

2002-01-01

Now is the time to put forth an effective code of ethics for businesses in outer space. A successful code would be voluntary and would actually promote the growth of individual companies, not hinder their efforts to provide products and services. A properly designed code of ethics would ensure the development of space commerce unfettered by government-created barriers. Indeed, if the commercial space industry does not develop its own professional code of ethics, government- imposed regulations would probably be instituted. Should this occur, there is a risk that the development of off-Earth commerce would become more restricted. The code presented in this paper seeks to avoid the imposition of new barriers to space commerce as well as make new commercial space ventures easier to develop. The proposed code consists of a preamble, which underscores basic values, followed by a number of specific principles. For the most part, these principles set forth broad commitments to fairness and integrity with respect to employees, consumers, business transactions, political contributions, natural resources, off-Earth development, designated environmental protection zones, as well as relevant national and international laws. As acceptance of this code of ethics grows within the industry, general modifications will be necessary to accommodate the different types of businesses entering space commerce. This uniform applicability will help to assure that the code will not be perceived as foreign in nature, potentially restrictive, or threatening. Companies adopting this code of ethics will find less resistance to their space development plans, not only in the United States but also from nonspacefaring nations. Commercial space companies accepting and refining this code would demonstrate industry leadership and an understanding that will serve future generations living, working, and playing in space. Implementation of the code would also provide an off-Earth precedent for a modified

Assessment of the occupational exposure at a fertiliser industry in the northern part of Greece.

Science.gov (United States)

Potiriadis, C; Koukouliou, V; Seferlis, S; Kehagia, K

2011-03-01

In the northern part of Greece, close to the city of Kavala, a phosphoric acid production industry has operated since 1965. The raw material used is the phosphate rock imported from the foreign countries. During industrial processes, naturally occurring radioactive materials (NORM) deposits exist in many facilities in the industry, causing increased levels of radiation exposure. Additionally, increased levels of NORM concentrations are also detected in the waste material of the production process, the phosphogypsum. According to the Greek Regulations for Radiation Protection (no. 216B, 5/3/2001), which is in accordance with the 96/29/EURATOM 31/5/1996, the action levels concerning the effective dose to workers at workplaces due to natural radiation sources are 1 mSv y(-1). Work activities where the corresponding doses exceed 6 mSv y(-1) are under the control of the Greek Atomic Energy Commission (GAEC). The mean yearly radon concentration action level at workplaces is 400 Bq m(-3), while the corresponding concentration limit is 3000 Bq m(-3), respectively. GAEC, according to its constitutional law, is the responsible organisation to enforce and to implement the law by means of in situ surveys and laboratory measurements. The first inspection of the area was performed in 2002 and the first measures were proposed. Periodic inspections were performed every 2 y in order to extend the operation licensing of the industry. In this work a dose assessment of the workers based on in situ and laboratory measurements is presented. In order to assess the doses to the workers the external and the internal doses are estimated.

Assessment of the occupational exposure at a fertiliser industry in the northern part of Greece

International Nuclear Information System (INIS)

Potiriadis, C.; Koukouliou, V.; Seferlis, S.; Kehagia, K.

2011-01-01

In the northern part of Greece, close to the city of Kavala, a phosphoric acid production industry has operated since 1965. The raw material used is the phosphate rock imported from the foreign countries. During industrial processes, naturally occurring radioactive materials (NORM) deposits exist in many facilities in the industry, causing increased levels of radiation exposure. Additionally, increased levels of NORM concentrations are also detected in the waste material of the production process, the phosphogypsum. According to the Greek Regulations for Radiation Protection (no. 216B, 5/3/2001), which is in accordance with the 96/29/EURATOM 31/5/1996, the action levels concerning the effective dose to workers at workplaces due to natural radiation sources are 1 mSv y -1 . Work activities where the corresponding doses exceed 6 mSv y -1 are under the control of the Greek Atomic Energy Commission (GAEC). The mean yearly radon concentration action level at workplaces is 400 Bq m -3 , while the corresponding concentration limit is 3000 Bq m -3 , respectively. GAEC, according to its constitutional law, is the responsible organisation to enforce and to implement the law by means of in situ surveys and laboratory measurements. The first inspection of the area was performed in 2002 and the first measures were proposed. Periodic inspections were performed every 2 y in order to extend the operation licensing of the industry. In this work a dose assessment of the workers based on in situ and laboratory measurements is presented. In order to assess the doses to the workers the external and the internal doses are estimated. (authors)

Space Ethics and Protection of the Space Environment

Science.gov (United States)

Williamson, Mark

2002-01-01

The construction of the International Space Station in low Earth orbit and the formulation of plans to search for life on Mars - one day by means of manned missions - indicate that mankind is intent on making the space environment part of its domain. Publicity surrounding space tourism, in-space `burials' and the sale of lunar `real estate' suggests that, some time in the 21st century, the space environment will become an extraterrestrial extension of our current business and domestic environment. This prompts the question of our collective attitude towards the space environment and the degree to which we should regulate its use and protect it for future generations. What, indeed, are the ethical considerations of space exploration and development? Ethics can be defined as "the philosophical study of the moral value of human conduct, and of the rules or principles that ought to govern it". More practically, it represents "an approved code of behaviour" adopted, for example, by a group or profession. If a set of ethics is to be developed for space, it is important that what we refer to as the `space community', or `space profession', is intimately involved. Indeed, if it is not, the profession risks having the job done for it, for example by politicians and members of the general public, who for their own reasons may wish to place restrictions on space development, or ban it altogether. The terrestrial nuclear power industry, for example, has already suffered this fate, while widespread ignorance of the subject has led to a moratorium on the use of RTGs in spacecraft. However, there is a danger in the discussion of ethics that consideration is confined to the philosophical aspects, thus excusing those involved from providing practical solutions to the problems that emerge. The fact that mankind has already affected, and arguably damaged, the space environment transports the discussion beyond the philosophical realm. This paper offers a pragmatic analysis of one

State space model extraction of thermohydraulic systems – Part I: A linear graph approach

International Nuclear Information System (INIS)

Uren, K.R.; Schoor, G. van

2013-01-01

Thermohydraulic simulation codes are increasingly making use of graphical design interfaces. The user can quickly and easily design a thermohydraulic system by placing symbols on the screen resembling system components. These components can then be connected to form a system representation. Such system models may then be used to obtain detailed simulations of the physical system. Usually this kind of simulation models are too complex and not ideal for control system design. Therefore, a need exists for automated techniques to extract lumped parameter models useful for control system design. The goal of this first paper, in a two part series, is to propose a method that utilises a graphical representation of a thermohydraulic system, and a lumped parameter modelling approach, to extract state space models. In this methodology each physical domain of the thermohydraulic system is represented by a linear graph. These linear graphs capture the interaction between all components within and across energy domains – hydraulic, thermal and mechanical. These linear graphs are analysed using a graph-theoretic approach to derive reduced order state space models. These models capture the dominant dynamics of the thermohydraulic system and are ideal for control system design purposes. The proposed state space model extraction method is demonstrated by considering a U-tube system. A non-linear state space model is extracted representing both the hydraulic and thermal domain dynamics of the system. The simulated state space model is compared with a Flownex ® model of the U-tube. Flownex ® is a validated systems thermal-fluid simulation software package. - Highlights: • A state space model extraction methodology based on graph-theoretic concepts. • An energy-based approach to consider multi-domain systems in a common framework. • Allow extraction of transparent (white-box) state space models automatically. • Reduced order models containing only independent state

The Austrian Space Plan

Science.gov (United States)

Pseiner, K.; Balogh, W.

2002-01-01

After several years of preparation and discussion among the involved players, the Austrian Space Plan was approved for implementation in November 2001. Based on careful benchmarking and analysis of the capabilities of the Austrian space sector it aims to create excellent conditions for the sector's further development. The new space strategy embraces Austria's participation in the mandatory and optional programmes of the European Space Agency and establishes a National Space Programme supported by separate funding opportunities. A set of clearly-defined indicators ensures that the progress in implementing the Space Plan can be objectively judged through independent, annual reviews. The National Space Programme promotes international cooperation in space research and space activities with the aim to strengthen the role of space science and to better prepare Austrian space industry for the commercial space market. In the framework of the Space Plan the Austrian Space Agency has been tasked with integrating the industry's growing involvement in aeronautics activities to better utilize synergies with the space sector. This paper reviews the various steps leading to the approval of the new space strategy and discusses the hurdles mastered in this process. It reports on the Space Plan's first results, specifically taking into account projects involving international cooperation. For the first the Austria aerospace-sector can rely on an integrated strategy for aeronautics- and space activities which is firmly rooted in the efforts to enhance the country's R&D activities. It may also act as a useful example for other small space- using countries planning to enhance their involvement in space activities.

Space ventures and society long-term perspectives

Science.gov (United States)

Brown, W. M.

1985-01-01

A futuristic evaluation of mankind's potential long term future in space is presented. Progress in space will not be inhibited by shortages of the Earth's physical resources, since long term economic growth will be focused on ways to constrain industrial productivity by changing social values, management styles, or government competence. Future technological progress is likely to accelerate with an emphasis on international cooperation, making possible such large joint projects as lunar colonies or space stations on Mars. The long term future in space looks exceedingly bright even in relatively pessimistic scenarios. The principal driving forces will be technological progress, commercial and public-oriented satellites, space industrialization, space travel, and eventually space colonization.

Managing Space System Faults: Coalescing NASA's Views

Science.gov (United States)

Muirhead, Brian; Fesq, Lorraine

2012-01-01

Managing faults and their resultant failures is a fundamental and critical part of developing and operating aerospace systems. Yet, recent studies have shown that the engineering "discipline" required to manage faults is not widely recognized nor evenly practiced within the NASA community. Attempts to simply name this discipline in recent years has been fraught with controversy among members of the Integrated Systems Health Management (ISHM), Fault Management (FM), Fault Protection (FP), Hazard Analysis (HA), and Aborts communities. Approaches to managing space system faults typically are unique to each organization, with little commonality in the architectures, processes and practices across the industry.

12th Reinventing Space Conference

CERN Document Server

2017-01-01

The 2014 Reinventing Space conference presented a number of questions in the context of a constantly innovating space industry, from addressing the future of global cooperation, investigating the impact of cuts in US government spending on the private space sector, and probing the overall future of the commercial launch sector. Space tourism and new technology promise the revival of interest in space development (the Apollo Era was the first period of intense space activity and growth). The need to create dramatically lower cost, responsive and reliable launch systems and spacecraft has never been more vital. Advances in technology are allowing smaller and cheaper satellites to be orbited - from cubesats to nanosatellites to femtosatellites. Thanks to more efficient new launch possibilities, low cost access to space is becoming ever more achievable. Commercial companies and countries are targeting the industry with new funding. Organised by the British Interplanetary Society, the presentations at this confere...

Space Guiding Us

Science.gov (United States)

Primikiri, Athina

2016-04-01

Taking into consideration the fact that general education provides the passport for a successful career the charting of Space consists of a constructive instrument available to every single teacher. Activities touching directly upon Space comprise a source of inspiration that encourages pupils to get acquainted with natural sciences and technology while consolidating their cross-curriculum knowledge. The applications and endeavors arising out of Space play a vital role for the further development and growth of our societies. Moreover, the prosperity of people is inextricably bound up with the implementation of Space policies adapted to different sectors such as the Environment, the phenomenon of climate change, matters affecting public or private safety, humanitarian aid and other technological issues. Therefore, the thorough analysis of Space endows us with insights about new products and innovative forms of industrial collaboration. As a teacher, I have consciously chosen to utilize the topic of Space in class as an instructive tool during the last 4 years. The lure of Space combined with the fascination provided by Space flights contributes to the enrichment of children's knowledge in the field of STEM. Space consists of the perfect cross-curriculum tool for the teaching of distinct subjects such as History, Geography, Science, Environment, Literature, Music, Religion and Physical Education. Following the Curriculum for pupils aged 9-10 I opted to teach the topic of Space under the title 'Space Guiding Us' as well as its subunits: • International Space Station • Cassini/Huygens, Mission to Titan • Rosetta & Philae • European Union and Space • Mission X: Train like an Astronaut The main purpose of choosing the module of 'Space' is to stimulate the scientific and critical thought of the pupils, to foster the co-operative spirit among them and to make them aware of how the application of Science affects their everyday lives. Aims • To incite pupils

Digital Data Matrix Scanner Developnent At Marshall Space Flight Center

Science.gov (United States)

2004-01-01

Research at NASA's Marshall Space Flight Center has resulted in a system for reading hidden identification codes using a hand-held magnetic scanner. It's an invention that could help businesses improve inventory management, enhance safety, improve security, and aid in recall efforts if defects are discovered. Two-dimensional Data Matrix symbols consisting of letters and numbers permanently etched on items for identification and resembling a small checkerboard pattern are more efficient and reliable than traditional bar codes, and can store up to 100 times more information. A team led by Fred Schramm of the Marshall Center's Technology Transfer Department, in partnership with PRI,Torrance, California, has developed a hand-held device that can read this special type of coded symbols, even if covered by up to six layers of paint. Before this new technology was available, matrix symbols were read with optical scanners, and only if the codes were visible. This latest improvement in digital Data Matrix technologies offers greater flexibility for businesses and industries already using the marking system. Paint, inks, and pastes containing magnetic properties are applied in matrix symbol patterns to objects with two-dimensional codes, and the codes are read by a magnetic scanner, even after being covered with paint or other coatings. The ability to read hidden matrix symbols promises a wide range of benefits in a number of fields, including airlines, electronics, healthcare, and the automotive industry. Many industries would like to hide information on a part, so it can be read only by the party who put it there. For instance, the automotive industry uses direct parts marking for inventory control, but for aesthetic purposes the marks often need to be invisible. Symbols have been applied to a variety of materials, including metal, plastic, glass, paper, fabric and foam, on everything from electronic parts to pharmaceuticals to livestock. The portability of the hand

Petroleum industry 1996; L`industrie petroliere 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

A survey on petroleum industry activities in France and in the world in 1996 is presented. The different parts and themes of the study are: evolution of the petroleum market (international and French markets, supply and demand, prices, mark-up and taxation in France and in Europe); activities in the petroleum industries (exploration and production, maritime transportation, inland transportation and storage, refining, quality of petroleum products and substitution fuels, oil distribution); environment and safety (refining, distribution and evolution of products, pipeline and maritime transportation, exploration and production); situation of the sector`s companies (oil groups, para-petroleum French industry, scientific and technical research)

Petroleum industry 1996; L`industrie petroliere 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

A survey on petroleum industry activities in France and in the world in 1996 is presented. The different parts and themes of the study are: evolution of the petroleum market (international and French markets, supply and demand, prices, mark-up and taxation in France and in Europe); activities in the petroleum industries (exploration and production, maritime transportation, inland transportation and storage, refining, quality of petroleum products and substitution fuels, oil distribution); environment and safety (refining, distribution and evolution of products, pipeline and maritime transportation, exploration and production); situation of the sector`s companies (oil groups, para-petroleum French industry, scientific and technical research)

Thermo-mechanical process modelling of industrially pultruded parts having UD and CFM layers

DEFF Research Database (Denmark)

Baran, Ismet; Hattel, Jesper Henri; Akkerman, Remko

2014-01-01

Numerical process simulation of an industrially pultruded rectangular hollow profile is presented. The product contains the continuous filament mat (CFM) and the uni-directional (UD) roving layers made of glass/polyester. The distortion and stress evolutions together with the temperature and degree...... of fields are predicted by the simulation tool developed by the authors. The predicted deformation pattern at the end of the process is found to agree quite well with the one for the real pultruded part in a commercial pultrusion company. A parametric study is also performed based on the total volumetric...... shrinkage of the resin system during curing. The process induced residual stresses are calculated in the in-plane directions which have the potential to influence the internal stress levels during the service loading conditions....

Industrial Waste Landfill IV upgrade package

International Nuclear Information System (INIS)

1994-01-01

The Y-12 Plant, K-25 Site, and ORNL are managed by DOE's Operating Contractor (OC), Martin Marietta Energy Systems, Inc. (Energy Systems) for DOE. Operation associated with the facilities by the Operating Contractor and subcontractors, DOE contractors and the DOE Federal Building result in the generation of industrial solid wastes as well as construction/demolition wastes. Due to the waste streams mentioned, the Y-12 Industrial Waste Landfill IV (IWLF-IV) was developed for the disposal of solid industrial waste in accordance to Rule 1200-1-7, Regulations Governing Solid Waste Processing and Disposal in Tennessee. This revised operating document is a part of a request for modification to the existing Y-12 IWLF-IV to comply with revised regulation (Rule Chapters 1200-1-7-.01 through 1200-1-7-.08) in order to provide future disposal space for the ORR, Subcontractors, and the DOE Federal Building. This revised operating manual also reflects approved modifications that have been made over the years since the original landfill permit approval. The drawings referred to in this manual are included in Drawings section of the package. IWLF-IV is a Tennessee Department of Environmental and Conservation/Division of Solid Waste Management (TDEC/DSWM) Class 11 disposal unit

Enhanced power generation in annular single-chamber microbial fuel cell via optimization of electrode spacing using chocolate industry wastewater.

Science.gov (United States)

Noori, Parisa; Najafpour Darzi, Ghasem

2016-05-01

Development and practical application of microbial fuel cell (MFC) is restricted because of the limitations such as low power output. To overcome low power limitation, the optimization of specific parameters including electrode materials and surface area, electrode spacing, and MFC's cell shape was investigated. To the best of our knowledge, no investigation has been reported in the literature to implement an annular single-chamber microbial fuel cell (ASCMFC) using chocolate industry wastewater. ASCMFC was fabricated via optimization of the stated parameters. The aspects of ASCMFC were comprehensively examined. In this study, the optimization of electrode spacing and its impact on performance of the ASCMFC were conducted. Reduction of electrode spacing by 46.15% (1.3-0.7 cm) resulted in a decrease in internal resistance from 100 to 50 Ω, which enhanced the power density and current output to 22.898 W/m(3) and 6.42 mA, respectively. An optimum electrode spacing of 0.7 cm was determined. Through this paper, the effects of these parameters and the performance of ASCMFC are also evaluated. © 2015 International Union of Biochemistry and Molecular Biology, Inc.

Strategies and Policies for Space - Indian Perspective

Science.gov (United States)

Kasturirangan, K.; Sridhara Murthy, K. R.; Sundararmiah, V.; Rao, Mukund

2002-01-01

Indian Space Program, which was established as government effort about three decades ago has become a major force in providing vital services for social and economic sectors in India in the fields of satellite telecommunications, television broadcasting, meteorological services and remote sensing of natural resources. Capabilities have been developed over the years, following a step-by-step process to develop and operate space infrastructure in India, including state-of-the-art satellites and satellite launch vehicles. In carrying out these developments, Indian Space Research Organisation, which is the national agency responsible for space activities under Government of India, develop policies and programs, which promoted industrial participation in variety of space activities including manufacture of space hardware, conduct of value added activities and provision of services involving space systems. Policy initiatives have also been taken recently to promote private sector participation in the establishment of Indian Satellite Systems for telecommunications. Strategic alliances have also been developed with international space industries for marketing of services such as remote sensing data. The paper traces evaluation of the policies towards development of industrial participation in space and future transition into commercial space enterprise. Policy issues concerning the national requirements vis-à-vis the international environment will also be discussed to analyze the strategies for international cooperation.

Space commerce in a global economy - Comparison of international approaches to commercial space

Science.gov (United States)

Stone, Barbara A.; Kleber, Peter

1992-01-01

A historical perspective, current status, and comparison of national government/commercial space industry relationships in the United States and Europe are presented. It is noted that space technology has been developed and used primarily to meet the needs of civil and military government initiatives. Two future trends of space technology development include new space enterprises, and the national drive to achieve a more competitive global economic position.

Thixoforming of Steels and Industrial Applications

International Nuclear Information System (INIS)

Ahmed, Rassili; Marc, Robelet; Regis, Bigot; Dirk, Fischer

2007-01-01

Thixoforming of steels becomes more and more investigated. Recent works show the economical potential of the process and lead to many industrial tests. In deed, compared to light metals, thixoformed steels open new markets and allow new designs of industrial parts taking into account, material and energy saving as well as industrial criteria such as parts quality and life.The Thixosteel consortium is developing new tools either in modelling, material study, assessment, parts design, adequate tools and equipments. Recent results and actual state of the art is presented and discussed

China’s wood furniture manufacturing industry: industrial cluster and export competitiveness

OpenAIRE

Yang, hongqiang; Ji, Chunyi; Nie, Ning; Hong, Yinxing

2012-01-01

China is the largest furniture exporter in the world. Its wood furniture industry has become an important part of the country’s forestry economic development. Hence, investigating China’s furniture industry cluster and export competitiveness is favorable for the sustainable development of China’s forestry industry. This study indicates that, under the guidance of the export-oriented strategy of China’s reform and opening up for 30 years, the country’s furniture industry has formed three big i...

Organizing space: Dutch space science between astronomy, industry and the government

NARCIS (Netherlands)

Baneke, D.M.

2016-01-01

This paper analyzes how scientists, private companies and the government in the Netherlands cooperated in the creation of the new field of space research. It examines especially the role of Philips Electronics and Fokker Aircraft, and the consequences of their different structure and corporate

Commercial Space Travel, Ethics and Society

Science.gov (United States)

Cox, N. L. J.

2002-01-01

For the past two decades interest in the possibilities of commercial (manned) space travel or space tourism has increased among engineers, scientists, entrepreneurs and also citizens. A continuously growing collection of papers is being published on space tourism itself and associated subjects, like new reusable launch vehicles, space habitats, space entertainment and corresponding law and regulation. Market research promises sufficient interest in tourist space travel to take off and develop into a multi billion-dollar business. The basic engineering knowledge and expertise is available to start development and designing of safe and affordable reusable vertical lift off and landing vehicles, like the Kankoh-Maru. However, many issues remain fairly untouched in literature. These include, for example, regulations, law, international agreement on space traffic control and also insurance policy. One important topic however has been barely touched upon. This concerns the ethical issues in commercial (manned) space travel, which need to be considered thoroughly, preferably before actual take off of the first regular space tourist services. The answer to the latter question comprises the major part of the paper. First, the paper deals with the issue of who wants, needs and will go to space at what stage in the development of the space tourism industry. A schematic pyramid differentiating between several community groups is made. Secondly, it discusses the way we can and should deal with our environment. Space is still fairly unspoiled, although there is a lot of (government) debris out there. Rules of the space tourist game need to be established. A few general directions are presented, for example on debris cleaning and garbage disposal. Also our right to exploit the asteroids and the moon for material is discussed. In the last part of this paper, the risks involved with the harsh environment of space are considered. Is it safe and responsible to eject people into outer

Analysis of changes in the federal funding trends to higher education for basic research in space, solar, and nuclear sciences compared to government and industry: 1967-1985

International Nuclear Information System (INIS)

Veasey, C. Jr.

1985-01-01

The problem addressed by this study is that the amount of federal funds allocated in higher education for conducting basic research in space, solar, and nuclear sciences appear to be declining relative to government and industry. To test this hypothesis, data were obtained from the National Science Foundation on the amounts of federal funds provided for research and development from fiscal years 1955 to 1985. The NSF data were organized into tables, presented, and analyzed to help determine what changes had occurred in the amounts of federal funds allocated to higher education, government, and industry for basic research in space, solar, and nuclear sciences for fiscal years 1967 to 1985. The study provided six recommendations to augment declining federal funds for basic research. (1) Expand participation in applied research, (2) Develop and expand consortia arrangements with other academic institutions of higher education. (3) Pursue other funding sources such as alumni, private foundations, industry, and state and local government. (4) Develop and expand joint research with national and industrial laboratories. (5) Expand participation in interdisciplinary and multidisciplinary research to develop technological solutions to local, regional, and national problems. (6) Develop and expand programs of reciprocal internships, and sabbaticals with industrial and national laboratories

China-Venezuela Space Cooperation Benefits and Review

Institute of Scientific and Technical Information of China (English)

Mariano Imbert

2016-01-01

For the last 10 years,the Venezuelan aerospace industry has been constantly growing,and it is to be expected to continue in the same way in the future.China and its space industry,as the main partner for most of the ongoing Venezuelan space projects from their beginning,has been an important player in their development and may continue acting as one of the most important partners not only for the Venezuelan aerospace industry but also for other Latin-American countries' aerospace industries.ABAE (Bolivarian Agency for Space Activities) together with the related Chinese aerospace companies,with the guidance and help of CGWIC,has been constantly improving its cooperation methods,regarding technical work flows as well as management activities,especially for the latest's space projects under development,namely the CIDE (Venezuelan Design,Assembly,Integration and Testing Center) and VRSS-2 (Venezuelan Remote Sensing Satellite-2) programs.Provided that there is a deeper and stronger cooperation in the future,partnership and friendship of the different scientists,experts and leaders from the space sectors of both countries,will be improved and strengthened for the development of both nations social welfare.

Economy of conservation options in the industry and the built environment. Part 1

International Nuclear Information System (INIS)

1994-03-01

To determine the optimal situation for the energy supply in the working area of the IJsselmij and Sep the study on the title subject was carried out. To influence the energy demand demand-side management (DSM) as part of integrated resource planning (IRP) is applied. Several scenarios to determine whether new production capacity must be installed or conservation options and activities should be realized are elaborated and calculated by means of the COMPASS model. E3T compiled input data for the demand-side of the model: energy consumption and energy conservation, investment cost and operational cost per user, number of installations and the development of the penetration of the conservation options between 1990 and 2010, and required subsidies and promotional costs of the IJsselmij to introduce such options. The economics of the energy conservation options are given in chapter 2. Six of the options were selected and elaborated in detail in a separate publication (part 2): coverage of cooling and freezing equipment at night, frequency control of electric motors, decentralized heat production by means of advanced burners, indoor climate control in the built environment, reflectors for TL-lighting systems in the built environment, and behavioral change in industrial companies. 2 figs., 7 tabs., 7 refs., 4 appendices

Inter laboratory comparison of industrial CT scanners

DEFF Research Database (Denmark)

Angel, Jais Andreas Breusch; Cantatore, Angela; De Chiffre, Leonardo

2012-01-01

In this report results from an intercomparison of industrial CT scanners are presented. Three audit items, similar to common industrial parts, were selected for circulation: a single polymer part with complex geometry (Item 1), a simple geometry part made of two polymers (Item 2) and a miniature...

Space Commercialization

Science.gov (United States)

Martin, Gary L.

2011-01-01

A robust and competitive commercial space sector is vital to continued progress in space. The United States is committed to encouraging and facilitating the growth of a U.S. commercial space sector that supports U.S. needs, is globally competitive, and advances U.S. leadership in the generation of new markets and innovation-driven entrepreneurship. Energize competitive domestic industries to participate in global markets and advance the development of: satellite manufacturing; satellite-based services; space launch; terrestrial applications; and increased entrepreneurship. Purchase and use commercial space capabilities and services to the maximum practical extent Actively explore the use of inventive, nontraditional arrangements for acquiring commercial space goods and services to meet United States Government requirements, including measures such as public-private partnerships, . Refrain from conducting United States Government space activities that preclude, discourage, or compete with U.S. commercial space activities. Pursue potential opportunities for transferring routine, operational space functions to the commercial space sector where beneficial and cost-effective.

Para-petroleum industry: international context. Results of the 2002 inquiry carried out by GEP, CEP and M and IFP (part. 2)

International Nuclear Information System (INIS)

Bensaid, B.; Fraysse, S.; Saniere, A.

2003-01-01

This article is the 2. part of the presentation of the inquiry about the 2002 economic results of the world para-petroleum industry: 1 - exploration-production: investments, geophysical activity (number of seismic survey teams, geophysical services market), drilling activity, construction of offshore production facilities (platforms construction, production equipments engineering), regional analysis (North America, North Sea, Latin America, Africa, Commonwealth of Independent States, Middle-East, Asia-Pacific). 2 - Refining and petrochemistry: economic context, refining industry expenses, fusions and results of refining companies, world petrochemical expenses, fusion and results of petrochemical companies. (J.S.)

Dedicated Space | Poster

Science.gov (United States)

The three-story, 330,000-square-foot Advanced Technology Research Facility has nearly 40,000 square feet designated as partnership space (shown in blue) for co-location of collaborators from industry, academia, nonprofit sectors, and other government agencies. The partnership space, combined with multiple conference rooms and meeting areas, encourages both internal and

The Brazilian Aerospace Industry: A Cast Study of the Technological Impact of Offset Agreements in a Recipient Industry

Science.gov (United States)

1989-12-01

sector, the most important development was the creation of the Secretaria de Tecnologia Industrial (STI) of the Ministry of Industry and Commerce (MIC...political and financial problems, Brazil’s space program, called Brazilian Complete Space Mission, Missdo Espacial Completa Brasileira - MECB, continues to...Pesquisa Espacial - INPE, also located in S&o Jos6 dos Campos’". It is responsible for the design and construction of satellites󈧼. The other activities

A commercial space technology testbed on ISS

Science.gov (United States)

Boyle, David R.

2000-01-01

There is a significant and growing commercial market for new, more capable communications and remote sensing satellites. Competition in this market strongly motivates satellite manufacturers and spacecraft component developers to test and demonstrate new space hardware in a realistic environment. External attach points on the International Space Station allow it to function uniquely as a space technology testbed to satisfy this market need. However, space industry officials have identified three critical barriers to their commercial use of the ISS: unpredictable access, cost risk, and schedule uncertainty. Appropriate NASA policy initiatives and business/technical assistance for industry from the Commercial Space Center for Engineering can overcome these barriers. .

Does nuclear power have a part to play?

International Nuclear Information System (INIS)

Hampson, D.C.

1992-01-01

Uranium has three significant uses: the generation of electricity, the production of heat for industrial purposes and space heating, and the cogeneration of both heat and electric power. Electricity is the most widely used and rapidly growing form of secondary energy. All conservation scenarios, including that of the World Commission on Environmental and Development (The Brundtland Report), rely on its expanded use. This paper considers the current role of nuclear energy in meeting world electricity needs and the part played by Australian uranium. It reviews the work being done on the development of small and medium sized power reactors, the strengthening and expansion of the Australian electricity grind and the possibility that the combination of the two, together with environmental concerns, may provide the opportunity for nuclear power to play a part in our future energy mix. 5 refs., 1 tab., 5 figs

At Home in Space

Institute of Scientific and Technical Information of China (English)

Yin Pumin

2011-01-01

CHINA'S first unmanned space module Tiangong-1,or Heavenly Palace-1,successfully lifted off from the Jiuquan Satellite Launch Center in northwest China's Gansu Province on September 29."The successfullaunch of the 8.5-ton prototype space laboratory has opened the gates for China's deep space exploration program," said Qi Faren,former chief designer of China's Shenzhou spacecraft."It is a decisive leap forward for the Chinese space industry and will bring about the rapid development of space science and related technologies."

Australian mineral industry annual review for 1984

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

This volume of the Australian Mineral Industry Annual Review records development and performance of the Australian mineral industry during the calendar year 1984. It reports production, consumption, treatment, trade, prices, new developments, exploration, and resources for mineral commodities including fuels, and summarises equivalent developments abroad. Part 1. 'general review' after briefly surveying the world mineral industry, summarises developments in the Australian mineral industry as a whole, under the headings: the industry in the national economy, prices, exploration expenditure, investment, income tax, royalties, structural data, wages and salaries, industrial disputes, and government assistance, legislation, and controls. Part 2. 'commodity review' covers individual mineral commodity groups, from abrasives to zirconium. Part 3, 'mining census', tabulates statistics extracted from the mining census, together with some mineral processing statistics from the manufacturing census. Part 4 tabulates quantity and value data on mineral output provided by state departments of mines and their equivalents. Listed in appendices are: principal mineral producers; ore buyers and mineral dealers; government mining services; analytical laboratories; state mines departments and equivalents; industry, professional and development organisations and associations, etc; summary of mineral royalties payable in the states and territories; and summary of income tax provisions and federal government levies.

Nuclear industry chart

International Nuclear Information System (INIS)

Anon.

1975-01-01

As part of a survey on Switzerland a pull-out organisation chart is presented of the nuclear industry showing Swiss government bodies and industrial concerns. Their interests, connections with each other and their associations with international and other national organizations and firms are indicated. (U.K.)

Open source projects as incubators of innovation: From niche phenomenon to integral part of the software industry

OpenAIRE

Schrape, Jan-Felix

2017-01-01

Over the last 20 years, open source development has become an integral part of the software industry and a key component of the innovation strategies of all major IT providers. Against this backdrop, this paper seeks to develop a systematic overview of open source communities and their socio-economic contexts. I begin with a reconstruction of the genesis of open source software projects and their changing relation- ships to established IT companies. This is followed by the identification of f...

Investigation of the Utilization of Modern Industrial Methods, Processes, Ergonomics, and the Internet in the Scientific Environment

Science.gov (United States)

Myer, Spencer S., Jr.

2005-01-01

On Oct. 1, 2001 Cleveland State University and NASA Glenn Research Center embarked on the above named cooperative agreement. Because NASA's research facilities often exhibit instances where the failure to use state-of-the-art technologies and methods to improve on outmoded systems of interface and control, and this runs contrary to the NASA philosophy of "faster, better, and cheaper", it was deemed an ideal opportunity for this collaboration. The main objectives of the proposed effort were to research and investigate the use of the latest technologies, methods, techniques, etc. which pertain to control and interface with industrial and research systems and facilities. The work was done in large part at NASA Glenn Research Center, using selected research facilities as real-world laboratories; such as certain Microgravity Science Division and Space Station projects. Microgravity Science Division at Glenn Research Center designs and builds experiments to be flown on the Space Shuttle and eventually on the International Space Station. Economy of space, weight, complexity, data storage, ergonomics, and many other factors present problems that also exist in industry. Many of the solutions can come from the same areas of study mentioned above.

Australian mineral industry annual review for 1986

Energy Technology Data Exchange (ETDEWEB)

1988-01-01

This volume of the Australian Mineral Industry Annual Review records the development and performance of the industry during the calendar year 1986. It reports production, consumption, treatment, trade, prices, new developments, exploration, and resources for mineral commodities including fuels, and summarises equivalent developments abroad. Part 1, 'General Review', after briefly surveying the world mineral industry, summarises developments in the Australian mineral industry as a whole. Part 2, 'Commodity Review', covers individual mineral commodities and commodity groups including brown coal, black coal and peat. Part 3, 'Mining Census', tabulates statistics extracted from the Mining Census, together with some mineral processing statistics from the Manufacturing Census. Part 4, tabulates quantity and value data on mineral output provided by the State departments of mines and their equivalents. The commodity review of black coal has been abstracted separately.

NASA Systems Autonomy Demonstration Project - Development of Space Station automation technology

Science.gov (United States)

Bull, John S.; Brown, Richard; Friedland, Peter; Wong, Carla M.; Bates, William

1987-01-01

A 1984 Congressional expansion of the 1958 National Aeronautics and Space Act mandated that NASA conduct programs, as part of the Space Station program, which will yield the U.S. material benefits, particularly in the areas of advanced automation and robotics systems. Demonstration programs are scheduled for automated systems such as the thermal control, expert system coordination of Station subsystems, and automation of multiple subsystems. The programs focus the R&D efforts and provide a gateway for transfer of technology to industry. The NASA Office of Aeronautics and Space Technology is responsible for directing, funding and evaluating the Systems Autonomy Demonstration Project, which will include simulated interactions between novice personnel and astronauts and several automated, expert subsystems to explore the effectiveness of the man-machine interface being developed. Features and progress on the TEXSYS prototype thermal control system expert system are outlined.

Venturing Further Into Space

Institute of Scientific and Technical Information of China (English)

YIN PUMIN

2011-01-01

China's first unmanNed space module Tiangong-Ⅰ,or Heavenly Palace-Ⅰ,successfully lifted off from the Jiuquan Satellite Launch Center in northwest China's Gansu Province on September 29."The successful launch of the 8.5-ton prototype space laboratory has opened the gates for China's deep space exploration program," said Qi Faren,former chief designer of China's Shenzhou spacecraft.“It is a decisive leap forward for the Chinese space industry and will bring about the rapid development of space science and related techologies."

Trends in space activities in 2014: The significance of the space activities of governments

Science.gov (United States)

Paikowsky, Deganit; Baram, Gil; Ben-Israel, Isaac

2016-01-01

This article addresses the principal events of 2014 in the field of space activities, and extrapolates from them the primary trends that can be identified in governmental space activities. In 2014, global space activities centered on two vectors. The first was geopolitical, and the second relates to the matrix between increasing commercial space activities and traditional governmental space activities. In light of these two vectors, the article outlines and analyzes trends of space exploration, human spaceflights, industry and technology, cooperation versus self-reliance, and space security and sustainability. It also reviews the space activities of the leading space-faring nations.

Industry's use of electric power

International Nuclear Information System (INIS)

1986-10-01

Alternative energy supplies and adaptation to energy demand are elucidated, primarily concerning space heating and industry. The consequences of the alternatives on the economic development of Sweden, the growth of industry, the situation of households and the effects of health and environment are being analysed. It is concluded that considerable portions of the industry will loose their competitive advantages. There will be restricted possibilities to solve the technical adaptation to the year 1997

Exploiting The New Commercial Space Race

Science.gov (United States)

2016-02-10

provided launches for the EELV on a sole-source basis. Recently the landscape of the commercial space launch industry is being changed by a new group of...commercial space launch industry is being changed by a new group of entrepreneurs motivated by broader interests other than only launching satellites...James Cameron-backed Planetary Resources which seeks to mine asteroids for precious metals  Richard Branson’s Virgin Galactic which started selling

The Russian gas industry

International Nuclear Information System (INIS)

1997-01-01

The Russian Federation holds the world's largest proven natural gas reserves, and produces more natural gas than any other nation. Russian exports of gas to Europe and the other nations of the Commonwealth of Independent States (CIS) have a significant impact on natural gas markets throughout Europe and Asia. The aim of this three part study is to inform the international energy and investment community about the current status of the Russian gas industry and the prospects for its future development through 2010. It is also intended to provide an opportunity for the appropriate authorities in the Russian Federation to assess the needs of the industry and to consider areas for possible collaboration with the international investment community and international organizations in a rapidly changing economic and business environment. The study was prepared by the Energy Branch of the United Nations Department for Development Support and Management Services (UN/DDSMS). It was financed by the United Nations Development Programme (UNDP). Part I describes Russian gas reserves and potential resources, and overviews the country's gas producing, pipeline and distribution industries. Additionally, it summarizes the markets for Russian natural gas including domestic and external markets. It discusses the primary economics and potential factors that currently impact the Russian gas industry during the Federation's transition toward a market economy. Part II highlights possible directions for the development of the Russian gas resource base, including upstream gas production and downstream marketing in five-, ten- and fifteen-year time frames. It projects export opportunities for Russian Federation gas and evaluates the options for shaping regional and international markets. Part III addresses the legal and regulatory framework and fiscal regime of the Russian gas industry. It also reviews the major investment requirements and the equipment and training needs of the Russian gas

Parametric cost estimation for space science missions

Science.gov (United States)

Lillie, Charles F.; Thompson, Bruce E.

2008-07-01

Cost estimation for space science missions is critically important in budgeting for successful missions. The process requires consideration of a number of parameters, where many of the values are only known to a limited accuracy. The results of cost estimation are not perfect, but must be calculated and compared with the estimates that the government uses for budgeting purposes. Uncertainties in the input parameters result from evolving requirements for missions that are typically the "first of a kind" with "state-of-the-art" instruments and new spacecraft and payload technologies that make it difficult to base estimates on the cost histories of previous missions. Even the cost of heritage avionics is uncertain due to parts obsolescence and the resulting redesign work. Through experience and use of industry best practices developed in participation with the Aerospace Industries Association (AIA), Northrop Grumman has developed a parametric modeling approach that can provide a reasonably accurate cost range and most probable cost for future space missions. During the initial mission phases, the approach uses mass- and powerbased cost estimating relationships (CER)'s developed with historical data from previous missions. In later mission phases, when the mission requirements are better defined, these estimates are updated with vendor's bids and "bottoms- up", "grass-roots" material and labor cost estimates based on detailed schedules and assigned tasks. In this paper we describe how we develop our CER's for parametric cost estimation and how they can be applied to estimate the costs for future space science missions like those presented to the Astronomy & Astrophysics Decadal Survey Study Committees.

Lunar Industry & Research Base Concept

Science.gov (United States)

Lysenko, J.; Kaliapin, M.; Osinovyy, G.

2017-09-01

Currently, all main space industry players, such as Europe, USA, Russia, China, etc., are looking back again at the idea of Moon exploration building there a manned lunar base. Alongside with other world spacefaring nations, Yuzhnoye State Design Office with its long-time development experience, technological and intellectual potential, organized its own conceptual work on development of the Lunar Industry & Research Base. In the frames of conceptual project "Lunar Industrial & Research Base" were formed its appearance, preliminary configuration and infrastructure at different stages of operation, trajectory and flight scheme to the Moon, as well as terms of the project's realization, and main technical characteristics of the systems under development, such as space transportation system for crew and cargo delivery to lunar surface and return to Earth, standardized designs of lunar modules, lunar surface vehicles, etc. The "Lunar Industrial & Research Base" project's preliminary risk assessment has shown a high value of its overall risk due to the lack of reliable information about the Moon, technical risks, long-term development of its elements, very high financial costs and dependence on state support. This points to the fact that it is reasonable to create such a global project in cooperation with other countries. International cooperation will expand the capabilities of any nation, reduce risks and increase the success probability of automated or manned space missions. It is necessary to create and bring into operation practical mechanisms for long-term space exploration on a global scale. One of the ways to do this is to create a multinational agency which would include both state enterprises and private companies.

State space model extraction of thermohydraulic systems – Part II: A linear graph approach applied to a Brayton cycle-based power conversion unit

International Nuclear Information System (INIS)

Uren, Kenneth Richard; Schoor, George van

2013-01-01

This second paper in a two part series presents the application of a developed state space model extraction methodology applied to a Brayton cycle-based PCU (power conversion unit) of a PBMR (pebble bed modular reactor). The goal is to investigate if the state space extraction methodology can cope with larger and more complex thermohydraulic systems. In Part I the state space model extraction methodology for the purpose of control was described in detail and a state space representation was extracted for a U-tube system to illustrate the concept. In this paper a 25th order nonlinear state space representation in terms of the different energy domains is extracted. This state space representation is solved and the responses of a number of important states are compared with results obtained from a PBMR PCU Flownex ® model. Flownex ® is a validated thermo fluid simulation software package. The results show that the state space model closely resembles the dynamics of the PBMR PCU. This kind of model may be used for nonlinear MIMO (multi-input, multi-output) type of control strategies. However, there is still a need for linear state space models since many control system design and analysis techniques require a linear state space model. This issue is also addressed in this paper by showing how a linear state space model can be derived from the extracted nonlinear state space model. The linearised state space model is also validated by comparing the state space model to an existing linear Simulink ® model of the PBMR PCU system. - Highlights: • State space model extraction of a pebble bed modular reactor PCU (power conversion unit). • A 25th order nonlinear time varying state space model is obtained. • Linearisation of a nonlinear state space model for use in power output control. • Non-minimum phase characteristic that is challenging in terms of control. • Models derived are useful for MIMO control strategies

Large size space construction for space exploitation

Science.gov (United States)

Kondyurin, Alexey

2016-07-01

Space exploitation is impossible without large space structures. We need to make sufficient large volume of pressurized protecting frames for crew, passengers, space processing equipment, & etc. We have to be unlimited in space. Now the size and mass of space constructions are limited by possibility of a launch vehicle. It limits our future in exploitation of space by humans and in development of space industry. Large-size space construction can be made with using of the curing technology of the fibers-filled composites and a reactionable matrix applied directly in free space. For curing the fabric impregnated with a liquid matrix (prepreg) is prepared in terrestrial conditions and shipped in a container to orbit. In due time the prepreg is unfolded by inflating. After polymerization reaction, the durable construction can be fitted out with air, apparatus and life support systems. Our experimental studies of the curing processes in the simulated free space environment showed that the curing of composite in free space is possible. The large-size space construction can be developed. A project of space station, Moon base, Mars base, mining station, interplanet space ship, telecommunication station, space observatory, space factory, antenna dish, radiation shield, solar sail is proposed and overviewed. The study was supported by Humboldt Foundation, ESA (contract 17083/03/NL/SFe), NASA program of the stratospheric balloons and RFBR grants (05-08-18277, 12-08-00970 and 14-08-96011).

The approach to risk analysis in three industries

International Nuclear Information System (INIS)

Garrick, B.J.

1991-01-01

It is the purpose of this paper to review how risk and safety analysis is performed in the three major industries of nuclear power, space flight, and chemical and petroleum processes. The underlying reason for such a review is the belief that efficiencies and safety enhancements may result from a greater exchange of risk assessment technology between these industries. The thrust of this discussion related to the engineered systems involved in the three industries. The industries are very different. The chemical industry epitomizes the highly competitive private sector and its bottom-line emphasis; the nuclear power industry is unique by the degree to which it is regulated; and the space industry is essentially a government business just beginning to have commercial implications. Institutional differences are extreme; however, from a societal needs, and their safety implications have a far reaching impact on public opinion and support. In reviewing the risk and safety analysis activities, particular attention is given to the use of such quantitative approaches as probabilistic risk assessment (PRA) as it has evolved in the nuclear power industry

Space Weather Monitoring for ISS Space Environments Engineering and Crew Auroral Observations

Science.gov (United States)

Minow, Joseph I.; Pettit, Donald R.; Hartman, William A.

2012-01-01

The awareness of potentially significant impacts of space weather on spaceand ground ]based technological systems has generated a strong desire in many sectors of government and industry to effectively transform knowledge and understanding of the variable space environment into useful tools and applications for use by those entities responsible for systems that may be vulnerable to space weather impacts. Essentially, effectively transitioning science knowledge to useful applications relevant to space weather has become important. This talk will present proven methodologies that have been demonstrated to be effective, and how in the current environment those can be applied to space weather transition efforts.

The politics of space - Who owns what? Earth law for space

Science.gov (United States)

Hosenball, S. N.

1983-01-01

Topics of concern in developing space law, i.e., international disagreements, the present status of space law, and requirements for future space activities, are discussed. Factors inhibiting agreements include governments that wish to control specific regions of GEO, the refusal of several countries to permit international DBS television broadcasts over their boundaries, the possibility that weapons may be placed in space, and the lack of international laws governing humans and industries in space. It is noted that any state entering an international agreement has relinquished some of its sovereignty. The Outer Space Treaty has removed celestial bodies from claims of national appropriation. States retain sovereignty over their citizens who travel in space, a problematical concept once internationally-manned settlements in space or on the moon are established. It is recommended that space law develop mainly in reaction to the implementation of new space capabilities in order to avoid hindering space activities.

Is China only assembling parts and components?: the recent spurt in high tech industry

Directory of Open Access Journals (Sweden)

Marcelo José Braga Nonnenberg

2012-08-01

Full Text Available The purpose of this paper is to evaluate to which degree China is climbing up the technology ladder and increasing its domestic content in high tech industry. More specifically, we will assess whether China has increased its share in world trade of high tech goods and, at the same time, increased its domestic content, changing its role from a mere final assembler to a producer of more intense technology goods. We have built an indicator of domestic value added calculated as the difference between exports of final goods and imports of its parts and components. The main conclusion is that this measure has increased significantly since the early 1990ís, putting in evidence the profound changes that occurred in Chinaís high tech exports in the last two decades.

Methanization of industrial liquid effluents

International Nuclear Information System (INIS)

Frederic, S.; Lugardon, A.

2007-01-01

In a first part, this work deals with the theoretical aspects of the methanization of the industrial effluents; the associated reactional processes are detailed. The second part presents the technological criteria for choosing the methanization process in terms of the characteristics of the effluent to be treated. Some of the methanization processes are presented with their respective advantages and disadvantages. At last, is described the implementation of an industrial methanization unit. The size and the main choices are detailed: the anaerobic reactor, the control, the valorization aspects of the biogas produced. Some examples of industrial developments illustrate the different used options. (O.M.)

NASA Electronic Parts and Packaging (NEPP) Program - Update

Science.gov (United States)

LaBel, Kenneth A.; Sampson, Michael J.

2010-01-01

This slide presentation reviews the goals and mission of the NASA Electronic Parts and Packaging (NEPP) Program. The NEPP mission is to provide guidance to NASA for the selection and application of microelectronics technologies, to improve understanding of the risks related to the use of these technologies in the space environment and to ensure that appropriate research is performed to meet NASA mission assurance needs. The program has been supporting NASA for over 20 years. The focus is on the reliability aspects of electronic devices. In this work the program also supports the electronics industry. There are several areas that the program is involved in: Memories, systems on a chip (SOCs), data conversion devices, power MOSFETS, power converters, scaled CMOS, capacitors, linear devices, fiber optics, and other electronics such as sensors, cryogenic and SiGe that are used in space systems. Each of these area are reviewed with the work that is being done in reliability and effects of radiation on these technologies.

Comparative analysis of energy impacts of traditional and partly electronic environmental auditing: Learning from the Japanese automotive industry case

OpenAIRE

Mbohwa, C

2008-01-01

This paper does a comparative analysis and assessment of energy impacts of traditional and partly electronic ISO 14001 environmental management system auditing that using videoconferencing systems. The focus is on the Japanese automotive industry. The idea is to quantify the environmental impacts of auditing and resolve the important question on whether or not the use of information and communication technology (ICT) in environmental auditing reduces environmental impacts in IS...

Simulating Emerging Space Industries with Agent-Based Modeling, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The Vision for Space Exploration (VSE) calls for encouraging commercial participation as a top-level objective. Given current and future commercial activities, how...

Analysis of Light Emitting Diode Technology for Aerospace Suitability in Human Space Flight Applications

Science.gov (United States)

Treichel, Todd H.

Commercial space designers are required to manage space flight designs in accordance with parts selections made from qualified parts listings approved by Department of Defense and NASA agencies for reliability and safety. The research problem was a government and private aerospace industry problem involving how LEDs cannot replace existing fluorescent lighting in manned space flight vehicles until such technology meets DOD and NASA requirements for reliability and safety, and effects on astronaut cognition and health. The purpose of this quantitative experimental study was to determine to what extent commercial LEDs can suitably meet NASA requirements for manufacturer reliability, color reliability, robustness to environmental test requirements, and degradation effects from operational power, while providing comfortable ambient light free of eyestrain to astronauts in lieu of current fluorescent lighting. A fractional factorial experiment tested white and blue LEDs for NASA required space flight environmental stress testing and applied operating current. The second phase of the study used a randomized block design, to test human factor effects of LEDs and a qualified ISS fluorescent for retinal fatigue and eye strain. Eighteen human subjects were recruited from university student members of the American Institute of Aeronautics and Astronautics. Findings for Phase 1 testing showed that commercial LEDs met all DOD and NASA requirements for manufacturer reliability, color reliability, robustness to environmental requirements, and degradation effects from operational power. Findings showed statistical significance for LED color and operational power variables but degraded light output levels did not fall below the industry recognized <70%. Findings from Phase 2 human factors testing showed no statistically significant evidence that the NASA approved ISS fluorescent lights or blue or white LEDs caused fatigue, eye strain and/or headache, when study participants perform

Associations between air pollution in the industrial and suburban parts of Ostrava city and their use.

Science.gov (United States)

Jirik, Vitezslav; Brezna, Barbara; Machaczka, Ondrej; Honkysova, Sabina; Miturova, Hana; Janout, Vladimir

2017-08-01

Selecting the locations and numbers of air quality monitoring stations is challenging as these are expensive to operate. Representative concentrations of pollutants in certain areas are usually determined by measuring. If there are significant correlations with concentrations of other pollutants or with other monitoring sites, however, concentrations could also be computed, partly reducing the costs. The aim of this study is to provide an overview of such possible relationships using data on concentrations of ambient air pollutants obtained in different areas of a larger city. Presented are associations between industrial (IP) and suburban parts (SP) as well as correlations between concentrations of various pollutants at the same site. Results of air pollutant monitoring come from Ostrava, an industrial city in Central Europe with a population of over 300,000. The study showed that certain pollutants were strongly correlated, especially particulate matter (r = 0.940) and ozone (r = 0.923) between the IP and SP. Statistically significant correlations were also found between different pollutants at the same site. The highest correlations were between PM 10 and NO 2 (r IP  = 0.728; r SP  = 0.734), NO 2 and benzo(a)pyrene (r IP  = 0.787; r SP  = 0.697), and NO 2 and ozone (r IP  = -0.706; r SP  = -0.686). This could contribute to more cost-effective solutions for air pollution monitoring in cities and their surroundings by using computational models based on the correlations, optimization of the network of monitoring stations, and the best selection of measuring devices.

Premature loss of primary teeth: part I, its overall effect on occlusion and space in the permanent dentition.

Science.gov (United States)

Hoffding, J; Kisling, E

1978-01-01

Premature loss of primary molars causes, without doubt, permanent changes in regard to space and sagittal molar relations, in the permanent dentition. The changes are due to drifting of teeth and lack of growth, and such changes should, whenever possible, be prevented. In part two of this series of papers, a further analysis of the data will be presented.

Managing volatility in the oil industry

International Nuclear Information System (INIS)

Bookout, J.F.

1990-01-01

A concern often expressed nowadays is that the survivability of parts of the oil industry is threatened. Over the past 15 years the oil industry has experienced a succession of rapid and significant changes. The dimensions of change include oil price, of course, but also changes in activity levels, employment, supply and demand, and in economic and political conditions. In this chapter we will examine some of these changes. In this paper, the authors compare the volatility of oil prices with that of other commodities, to determine whether the oil industry environment is unique in any way. Also in this discussion the authors consider the impact of futures market trading. Second, the authors look at the performance of various parts of the industry-the upstream exploration and production sector, the refining and retailing parts of the downstream sector, as well as a brief look at consumers. last, the authors consider whether the industry has adapted to this change environment, and what we might expect in the 1990s

Breaking barriers to interoperability: assigning spatially and temporally unique identifiers to spaces and buildings.

Science.gov (United States)

Pyke, Christopher R; Madan, Isaac

2013-08-01

The real estate industry routinely uses specialized information systems for functions, including design, construction, facilities management, brokerage, tax assessment, and utilities. These systems are mature and effective within vertically integrated market segments. However, new questions are reaching across these traditional information silos. For example, buyers may be interested in evaluating the design, energy efficiency characteristics, and operational performance of a commercial building. This requires the integration of information across multiple databases held by different institutions. Today, this type of data integration is difficult to automate and propone to errors due, in part, to the lack of generally accepted building and spaces identifiers. Moving forward, the real estate industry needs a new mechanism to assign identifiers for whole buildings and interior spaces for the purpose of interoperability, data exchange, and integration. This paper describes a systematic process to identify activities occurring at building or within interior spaces to provide a foundation for exchange and interoperability. We demonstrate the application of the approach with a prototype Web application. This concept and demonstration illustrate the elements of a practical interoperability framework that can increase productivity, create new business opportunities, and reduce errors, waste, and redundancy. © 2013 New York Academy of Sciences.

INDUSTRIAL TECHNOLOGICAL RESEARCH «DEVELOPMENT OF RUSSIAN MARKET OF NANOTECHNOLOGICAL PRODUCTS IN CONSTRUCTION UNTIL 2020». PART 2. ANALYSIS OF THE WORLD MARKET

Directory of Open Access Journals (Sweden)

GUSEV Boris Vladimirovich

2013-04-01

Full Text Available Some results of the industrial research «Development of Russian market of nanotechnological products in construction until 2020» have been published. Authors invite all interested specialists and specialized organization to take part in the broad public discussion.

Attraction aspects of petroleum industry: fragilities and opportunities for the petroleum companies - part 2; Atratividade da industria para-petrolifera: fragilidades e oportunidades para as petroleiras - parte 2

Energy Technology Data Exchange (ETDEWEB)

Duque, Marcelo Ascher; Szklo, Alexandre [Universidade Federal do Rio de Janeiro (PPE/COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Programa de Planejamento Energetico

2010-07-01

This paper is the second part of the study that examine the structure of the para-petroleum worldwide industry, in accordance with strategies of the largest service industries, the merger and the acquisitions, and the positioning of petroleum of petroleum related to their suppliers. The trajectory of the petroleum price since the beginning of the present decade and the investment volume of the petroleum companies on projects of E and P substantially increased the cash flow of their goods and services suppliers. So, as an answer, the recent mergers and acquisitions or the great companies of the service sector are modifying the grade of concentration of various activities alongside of the productive chain. This paper tests the statistical relationship among the the petroleum price and the invoicing of five largest worldwide petroleum companies, revealing the impact of the variation of petroleum price can have on the attraction of the service sector and their unfolding on the costs of the E and P projects.

Attraction aspects of petroleum industry: fragilities and opportunities for the petroleum companies - part 1; Atratividade da industria para-petrolifera: fragilidades e oportunidades para as petroleiras - parte 1

Energy Technology Data Exchange (ETDEWEB)

Duque, Marcelo Ascher; Szklo, Alexandre [Universidade Federal do Rio de Janeiro (PPE/COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Programa de Planejamento Energetico

2010-07-01

This paper is the first part of the study that examine the structure of the para-petroleum worldwide industry, in accordance with strategies of the largest service industries, the merger and the acquisitions, and the positioning of petroleum operators related to their suppliers. Through the characterization of service sector activities, identifying those more sensible to increasing of market concentration, revealing strategies of vertical integration which can rise the dependence grade of the petroleum companies close to their suppliers. So, this paper evaluates the evolution of the interface among the petroleum and the para-petroleum, identifying the following aspects: the variables that can modify the organizational structure of the agents, the strategies of the service enterprises to act in a environment of elevated dynamism in his structure and competition grade, the strategies of the operators with government participation related to the para-petroleum enterprise businesses, and the consolidation of the sector leader of the service sector and his search for integration.

The Second Space Race

Science.gov (United States)

Fawkes, S.

This paper compares and contrasts the characteristics of the first space race, which ran from the late 1950s to the late 1990s, and the second space race that began with the successful space flight of SpaceShipOne in 2004. The first space race was between superpowers seeking to establish geo-political dominance in the Cold War. The second space race will be between competing companies seeking to establish low cost access to space for ordinary people. The first space race achieved its geo- political objectives but did not open up low cost access to space but rather restricted access to a select few, highly trained astronauts and cosmonauts. The second space race, driven by the size and growth of the travel and tourism industry, promises to open up access to space to millions of space tourists.

Socio-Economic Impacts of Space Weather and User Needs for Space Weather Information

Science.gov (United States)

Worman, S. L.; Taylor, S. M.; Onsager, T. G.; Adkins, J. E.; Baker, D. N.; Forbes, K. F.

2017-12-01

The 2015 National Space Weather Strategy and Space Weather Action Plan (SWAP) details the activities, outcomes, and timelines to build a "Space Weather Ready Nation." NOAA's Space Weather Prediction Center and Abt Associates are working together on two SWAP initiatives: (1) identifying, describing, and quantifying the socio-economic impacts of moderate and severe space weather; and (2) outreach to engineers and operators to better understand user requirements for space weather products and services. Both studies cover four technological sectors (electric power, commercial aviation, satellites, and GNSS users) and rely heavily on industry input. Findings from both studies are essential for decreasing vulnerabilities and enhancing preparedness.

Space, geophysical research related to Latin America - Part 2

Science.gov (United States)

Mendoza, Blanca; Shea, M. A.

2016-11-01

For the last 25 years, every two to three years the Conferencia Latinoamericana de Geofísica Espacial (COLAGE) is held in one of the Latin American countries for the purpose of promoting scientific exchange among scientists of the region and to encourage continued research that is unique to this area of the world. At the more recent conference, the community realized that many individuals both within and outside Latin America have contributed greatly to the understanding of the space sciences in this area of the world. It was therefore decided to assemble a Special Issue Space and Geophysical Physics related to Latin America, presenting recent results and where submissions would be accepted from the world wide community of scientists involved in research appropriate to Latin America. Because of the large number of submissions, these papers have been printed in two separate issues. The first issue was published in Advances in Space Research, Vol. 57, number 6 and contained 15 papers. This is the second issue and contains 25 additional papers. These papers show the wide variety of research, both theoretical and applied, that is currently being developed or related to space and geophysical sciences in the Sub-Continent.

Solar cells for space applications (part 2)

International Nuclear Information System (INIS)

Gomez, T.J.

1992-01-01

This lecture focusses on qualification and verification tests and procedures on solar cells designed for space applications. The series of tests should produce orbital performance under determined illumination, temperature and irradiance. Tests are divided in outdoor and laboratory experiments. Environmental tests include durability, qualification (mechanical and electrical), I-V curves, Spectral response

A Historical Legacy Untouched by Time and Space? The Hollowing-out of the Norwegian Model of Industrial Relations

Directory of Open Access Journals (Sweden)

Ann Cecilie Bergene

2016-03-01

Full Text Available The Norwegian model of industrial relations has received a lot of praise. It is generally thought of as the pinnacle of the welfare state, a reason why Norway is not severely hit by crises, is highly adaptable, and thus still going strong. This article discusses the historical circumstances in which the model arose with a view to analyze the preconditions for its further existence, arguing that the model must be understood as consisting of, and thus dependent upon, shifting historical subjects. This calls for an analysis of the concrete interactions between various agents, and how it has changed over time and space. In this effort, historical accounts are combined with theories developed within the social sciences in order to explain the dynamics of these interactions. We will argue that the contemporary notion of a Norwegian model of industrial relations, and the accompanying praise, is an ahistorical conceptualization verging on a dogma, and that profound reconfigurations of power relations between the agents of labor and capital need to be taken into account.

NFL Films music scoring stage and control room space

Science.gov (United States)

Berger, Russ; Schrag, Richard C.; Ridings, Jason J.

2003-04-01

NFL Films' new 200,000 sq. ft. corporate headquarters is home to an orchestral scoring stage used to record custom music scores to support and enhance their video productions. Part of the 90,000 sq. ft. of sound critical technical space, the music scoring stage and its associated control room are at the heart of the audio facilities. Driving the design were the owner's mandate for natural light, wood textures, and an acoustical environment that would support small rhythm sections, soloists, and a full orchestra. Being an industry leader in cutting-edge video and audio formats, the NFLF required that the technical spaces allow the latest in technology to be continually integrated into the infrastructure. Never was it more important for a project to hold true to the adage of ``designing from the inside out.'' Each audio and video space within the facility had to stand on its own with regard to user functionality, acoustical accuracy, sound isolation, noise control, and monitor presentation. A detailed look at the architectural and acoustical design challenges encountered and the solutions developed for the performance studio and the associated control room space will be discussed.

ECO INDUSTRIAL STATE

Directory of Open Access Journals (Sweden)

Mariana López Pascual

2015-06-01

The facades will become aesthetically pleasing for the public space or such with the installation of a new technology of a photovoltaic-glass with transparency that can be used for windows or displays. A social program of artistic murals will accompany this with the aim for awareness on environmental protection. This is a project seeks to intervene in the public space, inviting the private sector for the economic investment and nurture to gives neighbours and all Barcelona's citizens a new and attractive image of this Industrial State

Trends in the location of the European car industry from an analysis of trade in parts and components; Tendencias en la localizacion de la industria Europea de automocion. Un analisis a partir del comercio de partes y componentes

Energy Technology Data Exchange (ETDEWEB)

Blazquez Gomez, L.; Diaz Mora, C.; Gandoy Juste, R.

2010-07-01

The object of this paper is to study the changes in location and specialization in the European automotive industry since the mid-nineties. The analysis is based on the examination of trade flows, distinguishing between final goods and parts and components, and on the delimitation of revealed comparative advantages for those countries leading the European industry. The results show the significance of the European production networks and the increasing new Eastern member countries role in them. Besides, they allow us to establish the main participant countries competitive position in those networks. As far as the Spanish industry is concerned, two aspects must be pointed out. On the one hand, the decrease in the advantages in cars assembly although the specialization in industrial motor vehicles maintains. And on the other hand, the competitive capacity showed by some auxiliary car industries. (Author) 22 refs.

The metalcasting industry and future research on the International Space Station

International Nuclear Information System (INIS)

Santner, Joe; Overfelt, Tony

2000-01-01

Fourteen million tons of castings are used annually in ninety percent of all manufactured goods and in all manufacturing machinery making metalcasting the manufacturing backbone of America. There are approximately 3,000 foundries located in 49 states directly providing employment to 200,000 people and indirectly supporting transportation, petrochemical, construction, and other end-user industries. The Solidification Design Center (SDC) began a pioneering effort to address metalcasting industry technical needs to maintain US global leadership in quality, price, and delivery. While individual companies have interacted in the past with the Auburn University SDC, eighty-percent of the foundries employ less than 100 individuals while only six-percent of the foundries employ more than 250 persons. The American Foundrymen's Society (AFS) formed the Solidification Design and Control Consortium to reach the small businesses in the U.S. metalcasting industry. Over a century of operation has proved the AFS committee structure to be a robust management tool. The recognized metalcasting industry technical needs and the unique opportunities that low earth orbit offers foundry process research are described in the present paper. In addition, the metalcasting approach to prioritize proposals, transfer technology developed within the small business community, and the metalcasting industry concerns regarding working with a government aerospace program are also discussed

14 CFR 399.31 - Standard industry fare level.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Standard industry fare level. 399.31... Standard industry fare level. (a) Generally. Except as set forth in paragraph (d) of this section, the standard industry fare level (“SIFL”) for coach/standard service in a market is equal to the predominant...

Exploring mechanisms for mobilising industrial sustainability models across different industrial locations

DEFF Research Database (Denmark)

Jacobsen, Ole Morten Noel Brings

2009-01-01

Industrial symbiosis is a model of sustainability which suggests that agglomerations of industries can achieve considerable environmental benefits by engaging in inter-organisational waste recycling, energy cascading and water recovery. This article considers how such a complex inter-organisation......Industrial symbiosis is a model of sustainability which suggests that agglomerations of industries can achieve considerable environmental benefits by engaging in inter-organisational waste recycling, energy cascading and water recovery. This article considers how such a complex inter...... symbiosis model may in this way be mobilised across industrial localities as part of the global corporate search for marked access and cost reductions. This suggestion is supported by an illustrative case study shedding some light on the mechanisms for mobilising sustainability models across localities....

Third Conference on Artificial Intelligence for Space Applications, part 2

Science.gov (United States)

Denton, Judith S. (Compiler); Freeman, Michael S. (Compiler); Vereen, Mary (Compiler)

1988-01-01

Topics relative to the application of artificial intelligence to space operations are discussed. New technologies for space station automation, design data capture, computer vision, neural nets, automatic programming, and real time applications are discussed.

Manufacturing strategy in the auto parts industry: a multicases study in companies at sorocaba’s region

Directory of Open Access Journals (Sweden)

Márcia Regina Neves Guimarães

2014-05-01

Full Text Available The alignment of manufacturing strategy with the business strategy is fundamental for achieving sustainable competitive advantage. In the particular case of the automotive industry, it is verified that the production strategy of suppliers is strongly influenced by the strategy of automakers. In this context, this paper aims at presenting characteristics of the content of the production strategy of four auto parts companies besides analyzing the influence of automakers in the definition of the strategy contents.This is a descriptive and exploratory research that uses  a qualitative approach and the multi-case study method. Among the main results, it was found that the prevalent competitive priority in the companies is quality followed by delivery. In the decision areas, it was noted that customers have great influence on the quality management of these companies and in the R&D activities, besides demanding frequent deliveries. Finally, it was found that auto parts companies seek to strengthen their competitive priorities by adopting criteria from suppliers  for selecting and evaluating.

West African Journal of Industrial and Academic Research

African Journals Online (AJOL)

... communications, state-of-the-art developments in Information and communications technology, ... physics, industrial electronics, management sciences and engineering, industry chemistry, general technology rocketry, space and ... application of communications and information technology to these fields of importance.

Strategies For Human Exploration Leading To Human Colonization of Space

Science.gov (United States)

Smitherman, David; Everett, Harmon

2009-01-01

Enabling the commercial development of space is key to the future colonization of space and key to a viable space exploration program. Without commercial development following in the footsteps of exploration it is difficult to justify and maintain public interest in the efforts. NASA's exploration program has suffered from the lack of a good commercial economic strategy for decades. Only small advances in commercial space have moved forward, and only up to Earth orbit with the commercial satellite industry. A way to move beyond this phase is to begin the establishment of human commercial activities in space in partnership with the human exploration program. In 2007 and 2008, the authors researched scenarios to make space exploration and commercial space development more feasible as part of their graduate work in the Space Architecture Program at the Sasakawa International Center for Space Architecture at the University of Houston, Houston, Texas. Through this research it became apparent that the problems facing future colonization are much larger than the technology being developed or the international missions that our space agencies are pursuing. These issues are addressed in this paper with recommendations for space exploration, commercial development, and space policy that are needed to form a strategic plan for human expansion into space. In conclusion, the authors found that the current direction in space as carried out by our space agencies around the world is definitely needed, but is inadequate and incapable of resolving all of the issues that inhibit commercial space development. A bolder vision with strategic planning designed to grow infrastructures and set up a legal framework for commercial markets will go a long way toward enabling the future colonization of space.

Industrial safety in power plants

International Nuclear Information System (INIS)

1987-01-01

The proceedings of the VGB conference 'Industrial safety in power plants' held in the Gruga-Halle, Essen on January 21 and 22, 1987, contain the papers reporting on: Management responsibility for and legal consequences of industrial safety; VBG 2.0 Industrial Accident Prevention Regulation and the power plant operator; Operational experience gained with wet-type flue gas desulphurization systems; Flue gas desulphurization systems: Industrial-safety-related requirements to be met in planning and operation; the effects of the Hazardous Substances Ordinance on power plant operation; Occupational health aspects of heat-exposed jobs in power plants; Regulations of the Industrial Accident Insurance Associations concerning heat-exposed jobs and industrial medical practice; The new VBG 30 Accident Prevention Regulation 'Nuclear power plants'; Industrial safety in nuclear power plants; safe working on and within containers and confined spaces; Application of respiratory protection equipment in power plants. (HAG) [de

Space Industry Study Industrial College of the Armed Forces National Defense University

Science.gov (United States)

2002-06-01

information technologies , especially fiber, cable, and cellular communications, which forced space systems away from old market roles and denied entry to... technologies fill market niches. As technology matures, small satellites have been viewed a partial solution to this cycle, enabling faster programs...years, the largely unforeseen growth in the internet has proven a valuable new market for satellite service providers. And over the past few years

Revitalization and ITS Impact on Public. Space Organization A Case Study of Manchester in UK, Lyon in France and Łódź in Poland

Directory of Open Access Journals (Sweden)

Jarosław Kazimierczak

2014-05-01

Full Text Available Process of deindustrialization of downtowns in most of well-developed Western European countries has been undertaken since 1960’s while in post-socialist countries just from last 25 years, after political and economic transitions in Central and Eastern Europe.  As far as urban structure is concerned, a new type of inner-city sites has appeared as a consequence of the collapse of industrial activities in second half of 20th century.  In vast majority of cases newly developed morhological units (e.g. run-down post-industrial have been unavailable to the public. As a reult, “classical” public space organization of European cities has been significantly changed. However, revitalization of post-industrial urban areas creates opportunities to reorganize public space according to current inhabitants and other urban space users’ needs. All transitions undertaken as a part of re-developement of brownfields sites are focused on impovements in physical and functional dimension of urban space quality to increase the standard of living condition. According to the concept of smat cities it is relaeted to “smart living” in sustainable urban environment. As a matter of fact, post-socialist cities in Central and Eastern Europe where interval of central planning was present in second half of 20th century and “classical” capitalist cites of Western Europe represent different patterns of public space transitions due to distinct historical development process of central space. In the paper a comparative study of Manchester, Lyon and Łódź is presented. The aim of the research is to indicate the reorganization of historically shaped public space structre in central space of analyzed cities after revitalization of post-industrial urban areas and new central space creation.

The Emergence of New Industries in Space: An evolutionary understanding of industry emergence from a geographical perspective

DEFF Research Database (Denmark)

Tanner, Anne Nygaard

of industrial organisational economics (Porter 1980) and in evolutionary economics (Dosi 1984, Nelson, Winter 1982). Second, the paper discusses the particularity that characterizes the temporal scope of industry emergence and it is claimed that the literature often lack attention to periods that precede......, which has characterized the field of economic geography. In particular, the framework builds on a critique of the predominant role previous theories have ascribed to chance events....

Movement and Maneuver in Deep Space: A Framework to Leverage Advanced Propulsion

Science.gov (United States)

2017-04-01

Magnetoplasma Rocket (VASIMR) .................................................... 20 Directed Energy-Driven Technology...power in space commensurate with the ambitions of private industry and peer competitors. In the commercial space industry, capital and capability are...opportunistic policies, intent, and actions of space-faring peer competitors such as China, Russia, and India, along with civil and commercial

Necessity of Mutual Understandings in Supply Chain Management of Lithium-Ion Battery for Space Vehicle

Science.gov (United States)

Kiyokawa, T.; Nakajima, M.; Mori, Y.

2012-01-01

Application of Lithium Ion Battery (LIB) is getting growth these days in space industry. Through the supply chain of LIB, it is very important to establish deepen mutual understandings between space industry people and non-space industry people in order to meet requirements of space grade quality control. Furthermore, this approach has positive effects for safety handling and safety transportation. This paper explains necessity of mutual understandings based on the analysis of aviation incident report. The study is focused on its background and issues on each related industry. These contents are studied and discussed in the New Work Item Proposal of the International Standard of LIB for space vehicle.

Economic Benefits of Space Tourism to Europe

Science.gov (United States)

Collins, P.

The European aerospace industry has been very slow to consider the commercial opportunities in supplying passenger space travel services. This has been a costly mistake not just of space policy, but also of economic policy and environmental policy. This is because it is very unlikely that space tourism will remain just a small-scale activity of the very rich; it is much more likely to grow into a major new industry, employing millions of people in high quality employment - eventually much of it outside the Earth's eco-system. This is particularly important because, although the European “social-economic model” has greater popular support than the “USA model” (including among the general USA population), Europe today faces the major problem of high unemployment, which is imposing heavy social and economic costs. If Europe makes serious efforts soon to encourage the growth of passenger space travel, and of the many other economically and environmentally valuable space activities to which this will lead, then commercial space activities could become a major new axis of economic growth and employment-creation for Europe. Moreover, Europe has several advantages over the USA, Russia, Japan, China and India, and so could play a leading role in this field, if policy errors are corrected. The paper discusses the above possibilities, and the potential economic, environmental and other benefits for Europe in investing boldly in this fledgling industry.

Country reports (Part 2). Country report on mining industry in Sabah Malaysia

Energy Technology Data Exchange (ETDEWEB)

Nordin, M S. B.

1988-06-25

In Sabah district of Malaysia, only one mining industry exists which is a joint venture between Japan and Malaysia, producing copper by consuming 500,000 tons/year of ore which contains 0.57% of copper and 0.65 gm/ton of gold. Regarding the mining industry, outline of its organization, process, equipments, and capacity are summarized. In addition, main clauses of safety regulation and its practises are explained. Concerning Burma, Governmental organization is shown as a graph and mining industries are divided into seven categories. Products, mining methods and capacities are explained by tables. (6 figs, 3 tables)

Impact of the Internet on Globalization : Industrial Internet

OpenAIRE

Jukics, Márk

2016-01-01

The thesis consists of two main parts. The first part is the theoretical framework, the second part is about assisting in a project of Centria University of Applied Sciences. The theoretical part of the thesis expounds the evolution and the benefits of the industrial internet. It explains the roots of globalization, internet, and industries. Lean manufacturing and management is also involved in the theory, as this way of management is successfully spreading by the help of globalization. I...

2012 in review - part II: overcoming the obstacles in the pharma/biotech industry.

Science.gov (United States)

Rabasseda, X; Dulsat, C; Navarro, D; Cruces, E; Graul, A I; Jago, C; Tracy, M

2013-02-01

As highlighted in the first part of this review published last month, the year 2012 saw the approval of a remarkable number of new drugs, and among the new drugs reaching the market, a significant proportion were orphan drugs developed for treating less prevalent diseases. These drugs are certainly not expected to become blockbusters, but are of high interest because of their efficacy in a narrow spectrum of patients. This trend aligns with the general tendency of staying away from fit-for-all blockbusters into personalized medicine as one of the strategies for overcoming the patent cliff that resulted in a long list of drugs going off patent and being approved as generics also during last year. The emerging scenario resulting from new developments in the form of new drugs and biosimilars and newly available generic medications paralleled by strategic movements within the pharmaceutical industry to reinforce their position in the market, as reflected by merger and acquisition deals accompanied by significant efforts into prioritization resulting in spin-off and split transactions, is reviewed in this second part. This paper includes a significant amount of data in tables for quick review and to profile the new strategic movements in drug pipelines. Further information, including details on mechanisms of action, current status, itemized pharmacology, pharmacokinetic and clinical trial research findings and updated information can be found in the proprietary databases Thomson Reuters Integrity(SM) and Thomson Reuters Cortellis™. Copyright 2013 Prous Science, S.A.U. or its licensors. All rights reserved.

The industrial and cultural heritage in landscape: Industrial Heritage, Landscape, Intelligent Territory

Directory of Open Access Journals (Sweden)

Miguel Ángel Álvarez Areces

2010-03-01

Full Text Available Scenic values, industrial traces and artistic heritage are intertwined in a continuous space. IndustrialHeritage has acquired a meaning beyond the aesthetic or testimonial to become a spatial or temporalcore face of forgetfulness and loss of place memory. The “smartplaces”, where active communitieslive, are or were able to organize themselves to design and reach a consensus concerning a projectfor the future. There is no approach to conservation, preservation and enhancement, or new uses ofheritage without assuming a new ethic regarding the natural and urban environment, with new spacesfor reflection to deal environmental issues with coherence, new spaces for working, especially at theregional level, taking into account the singularity of the physical environment, the complexity of energyand natural heritage resources. In the mining heritage, the whole vision is essential for a moreeffective results in the conservation job. It should not be considered a marginal issue but a priority inurban and regional planning. In the "architectural complex" cultural identity is implied, as well asindustrial and cultural landscapes, concerning to mining history, sometimes it is a discontinuous process. It takes centuries with remains and vestiges, and grouping of urban and rural constructions that have an interest in the surroundings. It analyses several Spanish and international experiences,cases and archetypes from regions with significant vestiges of the industrial revolution which illustratethe limits and possibilities of regional development programs, cultural and industrial tourism,museums, civic and social facilities which incite an interrelationship between nature, culture andindustry.

Cogeneration from Poultry Industry Wastes -- Part II: Economic Analysis

DEFF Research Database (Denmark)

Bianchi, M.; Cherubini, F.; Pascale, A. D.

2003-01-01

an existing poultry industry as fuel. Different plant configurations have been considered in order to make use of the oil and of the meat and bone meal, which are the by-products of the chicken cooking process. In particular, the process plant can be integrated with an energy supply plant which can consist...

Rancang bantun industri kecil suku cadang / komponen kulit teknis untuk industri tekstil

Directory of Open Access Journals (Sweden)

Suliestiyah Wiryodiningrat

1995-06-01

Full Text Available The objective of this research is to find out proses of production and relation between cost, Selling price anda break even point (BEP. Product specification is space parts for Textile industries i.e.Picker, Buffer, Bumper leather, Sweel leather, Box front leather, Stick Bumper and Tension brake leather. The production capacity is 700 units per-day, so that in one year is 210.000 units. The economical analysis showed that Total Captal (fixed capital and working capital =Rp. 149.189.750.00. Total production cost per-year (fixed cost and variable cost Rp. 364.939.375.00. The manufacturing cost = Rp. 12.165 for 7 spareparts. Profit calculation before taxing = Rp. 57.310.625.00 and after taxing Rp. 45.848.500.00. Percentage of the pay out periode calculation of profit to return the capital (rate of return. Before taxing is 38.40%, after 30.73%. equal with 2 years 6 months (before taxing and after taxing is 3 years. The break even point calculation = Rp. 207.347.274,00 (49,10% and the capacity is 14.732 units.

Industrial energy thrift scheme. Report No. 16. Energy use in the knitting industry

Energy Technology Data Exchange (ETDEWEB)

1979-12-01

The knitting industry includes organizations concerned with hosiery, other weft knitted goods and warp-knitting and in some cases also with subsequent dyeing and finishing of knitted goods. In 1976, the industry had 116,000 employees located at approximately 600 sites, mostly in the East Midlands. The total energy consumption of the industry in 1976 was estimated to be 12,180 TJ. Sites with dyeing and finishing interests could save 15% of their energy. The major sources of savings (6%) are by recovering process heat which is currently wasted and from better process control. Other significant savings (5%) are possible from better control, maintenance and insulation of boilers and pipes. Attention to better housekeeping, to controlling draughts and to space heating generally could account for a further 3.5% saving in energy. Sites without dyeing and finishing interests could save 13% of the total energy used by this group. The most important opportunities are better control of space heating (5.5%) and better control and insulation of boilers, pipes and services (5%). These sites have fewer opportunities to recover heat from processes (2%) than where dyeing and finishing takes place but opportunities do exist.

The Development of Nanotechnologies and Advanced Materials Industry in Science and Entrepreneurship: Scientific Indicators. A Case Study of Latvia (Part Three)

Science.gov (United States)

Geipele, S.; Geipele, I.; Kauskale, L.; Zeltins, N.; Staube, T.; Pudzis, E.

2017-10-01

The present scientific paper is the third part and continuation of the indepth scientific study of the developed system of engineering economic indicators, where the authors obtain results from the scientific research presented in a series of works on the development of the nanotechnologies and advanced materials industry in science and entrepreneurship in Latvia. Part three determines the crucial scientific indicators of the development of nano-field at the macro, micro, and meso development levels of the economic environment in Latvia. The paper provides the interaction of new identified indicators of nanofield in terms of further scientific and practical activities. Latvia is analysed in comparison with other countries in the world.

Petroleum industry 1996

International Nuclear Information System (INIS)

1997-01-01

A survey on petroleum industry activities in France and in the world in 1996 is presented. The different parts and themes of the study are: evolution of the petroleum market (international and French markets, supply and demand, prices, mark-up and taxation in France and in Europe); activities in the petroleum industries (exploration and production, maritime transportation, inland transportation and storage, refining, quality of petroleum products and substitution fuels, oil distribution); environment and safety (refining, distribution and evolution of products, pipeline and maritime transportation, exploration and production); situation of the sector's companies (oil groups, para-petroleum French industry, scientific and technical research)

27 CFR 6.35 - Renting display space.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Renting display space. 6.35 Section 6.35 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Renting display space. The renting of display space by an industry member at a retail establishment...

27 CFR 6.56 - Renting display space.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Renting display space. 6.56 Section 6.56 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Distribution Service § 6.56 Renting display space. A promotion whereby an industry member rents display space...

Developing and Managing University-Industry Research Collaborations through a Process Methodology/Industrial Sector Approach

Science.gov (United States)

Philbin, Simon P.

2010-01-01

A management framework has been successfully utilized at Imperial College London in the United Kingdom to improve the process for developing and managing university-industry research collaborations. The framework has been part of a systematic approach to increase the level of research contracts from industrial sources, to strengthen the…

Scientific competency questions as the basis for semantically enriched open pharmacological space development

DEFF Research Database (Denmark)

Azzaoui, Kamal; Jacoby, Edgar; Senger, Stefan

2013-01-01

Molecular information systems play an important part in modern data-driven drug discovery. They do not only support decision making but also enable new discoveries via association and inference. In this review, we outline the scientific requirements identified by the Innovative Medicines Initiative...... (IMI) Open PHACTS consortium for the design of an open pharmacological space (OPS) information system. The focus of this work is the integration of compound–target–pathway–disease/phenotype data for public and industrial drug discovery research. Typical scientific competency questions provided...

Optimizing rib width to height and rib spacing to deck plate thickness ratios in orthotropic decks

Directory of Open Access Journals (Sweden)

Abdullah Fettahoglu

2016-12-01

Full Text Available Orthotropic decks are composed of deck plate, ribs, and cross-beams and are frequently used in industry to span long distances, due to their light structures and load carrying capacities. Trapezoidal ribs are broadly preferred as longitudinal stiffeners in design of orthotropic decks. They supply the required stiffness to the orthotropic deck in traffic direction. Trapezoidal ribs are chosen in industrial applications because of their high torsional and buckling rigidity, less material and welding needs. Rib width, height, spacing, thickness of deck plate are important parameters for designing of orthotropic decks. In the scope of this study, rib width to height and rib spacing to deck plate thickness ratios are assessed by means of the stresses developed under different ratios of these parameters. For this purpose a FE-model of orthotropic bridge is generated, which encompasses the entire bridge geometry and conforms to recommendations given in Eurocode 3 Part 2. Afterwards necessary FE-analyses are performed to reveal the stresses developed under different rib width to height and rib spacing to deck plate thickness ratios. Based on the results obtained in this study, recommendations regarding these ratios are provided for orthotropic steel decks occupying trapezoidal ribs.

Potential Opportunities for Investment in Space Technologies in Latin-America: a Case for Mexico

Science.gov (United States)

Sanchez, G.

2002-01-01

Student, Master of Space Studies. International Space University. Strasbourg Central The objective of this paper is to analyze the possible commercial benefits that the global manufacturing space industry could obtain by investing in Latin-American countries. Spacecraft manufacturers have recently been complaining about small margins. They claim that customers demand technological advancement at the same time as they push for quick delivery and competitive prices. They also argue that operators (their main customers) do have great profits. Thus, manufacturers would like to raise the prices of their spacecraft (SpaceNews. January 7, 2002. P.17). This may sound logical, but it would be interesting to analyze if the industry could find alternative ways of saving money while remaining competitive. Mexico is a good example of a Latin-American country that has received foreign investment for establishing manufacturing and assembly plants for different industries. This has been mainly due to two special characteristics of the Mexican manufacturing workforce: low labor costs and qualified, reliable human resources. As a result, Mexican manufacturing industry has acquired a solid reputation worldwide. A similar story can be told about other industries such as electronics, computer assembly, clothes, etc. It is probably worth to make an analogy with a labor-demanding industry that already has experience in the Mexican market: the car industry has found a formula to keep manufacturing costs low while maintaining production and quality levels. Mexico currently manufactures and assembles cars for European, Japanese and American companies for the international market. If the same success story could be repeated for the spacecraft manufacturing industry, the benefits would be enormous. Manufacturers could consider relocating their plants to Mexico to manufacture and test parts or entire spacecraft. This would help reduce the cost of human labor, especially because of the long

Which Space? Whose Space? An Experience in Involving Students and Teachers in Space Design

Science.gov (United States)

Casanova, Diogo; Di Napoli, Roberto; Leijon, Marie

2018-01-01

To date, learning spaces in higher education have been designed with little engagement on the part of their most important users: students and teachers. In this paper, we present the results of research carried out in a UK university. The research aimed to understand how students and teachers conceptualise learning spaces when they are given the…

The making and remaking of dismissed industrial sites

NARCIS (Netherlands)

Curulli, G.I.

2014-01-01

The Making and Remaking of Dismissed Industrial Sites examines the transformation of former industrial areas and the implications of the design of reuse with aesthetics, context, history and memory, public space and reclamation of contaminated soils. Through a critical investigation of these

Space and Atmospheric Environments: From Low Earth Orbits to Deep Space

Science.gov (United States)

Barth, Janet L.

2003-01-01

Natural space and atmospheric environments pose a difficult challenge for designers of technological systems in space. The deleterious effects of environment interactions with the systems include degradation of materials, thermal changes, contamination, excitation, spacecraft glow, charging, radiation damage, and induced background interference. Design accommodations must be realistic with minimum impact on performance while maintaining a balance between cost and risk. The goal of applied research in space environments and effects is to limit environmental impacts at low cost relative to spacecraft cost and to infuse enabling and commercial off-the-shelf technologies into space programs. The need to perform applied research to understand the space environment in a practical sense and to develop methods to mitigate these environment effects is frequently underestimated by space agencies and industry. Applied science research in this area is critical because the complexity of spacecraft systems is increasing, and they are exposed simultaneously to a multitude of space environments.

Staging Sociotechnical Spaces

DEFF Research Database (Denmark)

Clausen, Christian; Yoshinaka, Yutaka

2007-01-01

The management of innovation and product development is increasingly facing complex challenges of staging design processes across heterogeneous organisational spaces, with multiple actor-concerns and sources of knowledge. This paper addresses how insights from the Actor-Network Theory and political...... is elaborated as being an occasioning as well as a result of socio-technical choices and processes, and points to the role of socio-material as well as discursive practices, which frame and render particular spaces open to management and to the coordination of knowledge flows and ideas in early phases...... of product development. The concept of socio-technical spaces is further illustrated through actual examples from industry dealing with early conceptualisation in product development and the role played by management concepts in the configuration of spaces....

Material Usage in High Pressure Oxygen Systems for the International Space Station

Science.gov (United States)

Kravchenko, Michael; Sievers, D. Elliott

2014-01-01

The Nitrogen/Oxygen Recharge System (NORS) for the International Space Station (ISS) Program was required as part of the Space Shuttle retirement efforts to sustain the ISS life support systems. The system is designed around a 7000 psia Oxygen or Nitrogen Recharge Tank Assembly which is able to be utilized both internally and externally to the ISS. Material selection and usage were critical to ensure oxygen compatibility for the design, while taking into consideration toxicity, weldability, brazability and general fabrication and assembly techniques. The system uses unique hardware items such a composite overwrap pressure vessel (COPV), high pressure mechanical gauges, compact regulators and valves, quick disconnects, metal tubing and flexhoses. Numerous challenges and anomalies were encountered due to the exotic nature of this project which will be discussed in detail. The knowledge gained from these anomalies and failure resolutions can be applied to more than space applications, but can also be applicable to industry pressurized systems.

75 FR 70347 - Commercial Space Transportation Advisory Committee; Renewal

Science.gov (United States)

2010-11-17

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Commercial Space Transportation... Regulations, notice is hereby given that the Commercial Space Transportation Advisory Committee (COMSTAC) has... matters concerning the U.S. commercial space transportation industry. The [[Page 70348

Industrial Electrostatic-Gecko Gripper, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Perception Robotics is developing an innovative product, the Electrostatic Gecko Gripper? (ESG Gripper), for the industrial automation market. This unique gripping...

Industrial Electrostatic-Gecko Gripper, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Perception Robotics is developing an innovative product, the "Electrostatic Gecko Gripper" (ESG Gripper), for the industrial automation market. This unique gripping...

Space time modelling of air quality for environmental-risk maps: A case study in South Portugal

Science.gov (United States)

Soares, Amilcar; Pereira, Maria J.

2007-10-01

Since the 1960s, there has been a strong industrial development in the Sines area, on the southern Atlantic coast of Portugal, including the construction of an important industrial harbour and of, mainly, petrochemical and energy-related industries. These industries are, nowadays, responsible for substantial emissions of SO2, NOx, particles, VOCs and part of the ozone polluting the atmosphere. The major industries are spatially concentrated in a restricted area, very close to populated areas and natural resources such as those protected by the European Natura 2000 network. Air quality parameters are measured at the emissions' sources and at a few monitoring stations. Although air quality parameters are measured on an hourly basis, the lack of representativeness in space of these non-homogeneous phenomena makes even their representativeness in time questionable. Hence, in this study, the regional spatial dispersion of contaminants is also evaluated, using diffusive-sampler (Radiello Passive Sampler) campaigns during given periods. Diffusive samplers cover the entire space extensively, but just for a limited period of time. In the first step of this study, a space-time model of pollutants was built, based on a stochastic simulation-direct sequential simulation-with local spatial trend. The spatial dispersion of the contaminants for a given period of time-corresponding to the exposure time of the diffusive samplers-was computed by ordinary kriging. Direct sequential simulation was applied to produce equiprobable spatial maps for each day of that period, using the kriged map as a spatial trend and the daily measurements of pollutants from the monitoring stations as hard data. In the second step, the following environmental risk and costs maps were computed from the set of simulated realizations of pollutants: (i) maps of the contribution of each emission to the pollutant concentration at any spatial location; (ii) costs of badly located monitoring stations.

Sustainable Industrialization in the Building Industry: On the Road to Energy Efficient Construction Management

DEFF Research Database (Denmark)

Wandahl, Søren; Ussing, Lene Faber

2013-01-01

Since the Brundtland report in 1987, sustainability has been an issue in all parts of the world, and the focus is increasing in these years. In the same period, the building industry has in the same period also been under heavy pressure to increase productivity in the same pace as other manufactu......Since the Brundtland report in 1987, sustainability has been an issue in all parts of the world, and the focus is increasing in these years. In the same period, the building industry has in the same period also been under heavy pressure to increase productivity in the same pace as other...... manufacturing industries. An important question, then, is how well these two highly relevant areas can go hand in hand. By means of comparing the main ideas and drivers behind sustainability and industrialization, respectively, common threads, possible synergies and evident barriers are put forward...... in this discussion paper. The main method is a review to track past merits in the two domains and to detect knowledge gaps that have research potential. A strategic research agenda focusing on energy-efficient construction management is outlined showing the need for future focus on combining industrialization...

High Pressure Industrial Water Facility

Science.gov (United States)

1992-01-01

In conjunction with Space Shuttle Main Engine testing at Stennis, the Nordberg Water Pumps at the High Pressure Industrial Water Facility provide water for cooling the flame deflectors at the test stands during test firings.

Technology R&D for space commerce

Science.gov (United States)

Sadin, Stanley R.; Christensen, Carissa B.; Steen, Robert G.

1992-01-01

The potential effects of reserach conducted by the NASA Office of Aeronautics and Space Technology, OAST, on the aerospace industry are addressed. Program elements aimed at meeting commercial needs and those aimed at meeting NASA needs which have secondary effects benefiting aerospace firms are considered. Particular attention is given to current and future NASA programs for cooperating with industry and the potential effects of OAST research on nonaerospace industries.

West African Journal of Industrial and Academic Research: Editorial ...

African Journals Online (AJOL)

... communications, state-of-the-art developments in Information and communications technology, ... physics, industrial electronics, management sciences and engineering, industry chemistry, general technology rocketry, space and ... application of communications and information technology to these fields of importance.

A sustainable approach for industrial area redevelopment in the Netherlands

NARCIS (Netherlands)

Blokhuis, E.G.J.; Schaefer, W.F.; Kungolos, A.; Brebbia, C.A.; Beriatos, E.

2007-01-01

According to the Dutch Ministry of Economic Affairs, creating space for industrial areas is necessary to realize a sustainable economic growth. Currently, the average time needed to redevelop an industrial area in the Netherlands is 10 years. Furthermore, almost 30% of the Dutch stock of industrial

Coordinating Space Nuclear Research Advancement and Education

International Nuclear Information System (INIS)

Bess, John D.; Webb, Jonathon A.; Gross, Brian J.; Craft, Aaron E.

2009-01-01

The advancement of space exploration using nuclear science and technology has been a goal sought by many individuals over the years. The quest to enable space nuclear applications has experienced many challenges such as funding restrictions; lack of political, corporate, or public support; and limitations in educational opportunities. The Center for Space Nuclear Research (CSNR) was established at the Idaho National Laboratory (INL) with the mission to address the numerous challenges and opportunities relevant to the promotion of space nuclear research and education.1 The CSNR is operated by the Universities Space Research Association and its activities are overseen by a Science Council comprised of various representatives from academic and professional entities with space nuclear experience. Program participants in the CSNR include academic researchers and students, government representatives, and representatives from industrial and corporate entities. Space nuclear educational opportunities have traditionally been limited to various sponsored research projects through government agencies or industrial partners, and dedicated research centers. Centralized research opportunities are vital to the growth and development of space nuclear advancement. Coordinated and focused research plays a key role in developing the future leaders in the space nuclear field. The CSNR strives to synchronize research efforts and provide means to train and educate students with skills to help them excel as leaders.

Inventing a space mission the story of the Herschel space observatory

CERN Document Server

Minier, Vincent; Bontems, Vincent; de Graauw, Thijs; Griffin, Matt; Helmich, Frank; Pilbratt, Göran; Volonte, Sergio

2017-01-01

This book describes prominent technological achievements within a very successful space science mission: the Herschel space observatory. Focusing on the various processes of innovation it offers an analysis and discussion of the social, technological and scientific context of the mission that paved the way to its development. It addresses the key question raised by these processes in our modern society, i.e.: how knowledge management of innovation set the conditions for inventing the future? In that respect the book is based on a transdisciplinary analysis of the programmatic complexity of Herschel, with inputs from space scientists, managers, philosophers, and engineers. This book is addressed to decision makers, not only in space science, but also in other industries and sciences using or building large machines. It is also addressed to space engineers and scientists as well as students in science and management.

Heat transfer in a Couette flow with part of the space between the plates filled with porous medium

International Nuclear Information System (INIS)

Carrocci, L.R.; Liu, C.Y.; Ismail, K.A.R.

1982-01-01

The effect of various parameters in the temperature profile is shown under boundary conditions for the Couette flow between infinite plates with part of the space filled with porous medium. The parameters observed are: pressure gradient, permeability, the non-dimensional product PE (Prandtl number x Eckert number), the relation between the thermal conductibility coefficient between porous region and pure fluid, and finally the non-dimensional product PR (Prandtl number x Reynolds number). (E.G.) [pt

Neo-industrialization of Kuzbass economy in innovative development of coal industry and machinery

Directory of Open Access Journals (Sweden)

Balabanova Anna

2017-01-01

Full Text Available As part of rental-resource model and access restrictions to capital and new technologies, the attempts to encourage import substitution made by the government do not generate innovative type of economic development and reconstruction of economy’s manufacturing industry competitive on the domestic market. In conditions of searching for a new model of Russian economy development the analysis of a number of problems such as industry degradation, reducing the competitiveness of Russian producers, the growth of structural imbalances and overcoming the negative macroeconomic trends becomes strategically important. This raises the value of neo-industrialization as the integrator of resource security, scientific and industrial potential of Russian economy and high capacity of the domestic market in the innovative development system. A special role neo-industrialization plays for the economic development of old industrial regions, which include Kuzbass (Western Siberia, Russia. Neo-industrial development of Kuzbass economy should be initiated by the technological modernization of mining machinery and innovative development of coal industry.

Wastes in space

International Nuclear Information System (INIS)

2011-01-01

As human space activities have created more wastes on low and high Earth orbits over the past 50 years than the solar system injected meteorites over billions of years, this report gives an overview of this problem. It identifies the origins of these space debris and wastes (launchers, combustion residues, exploitation wastes, out-of-use satellites, accidental explosions, accidental collisions, voluntary destructions, space erosion), and proposes a stock list of space wastes. Then, it distinguishes the situation for the different orbits: low Earth orbit or LEO (traffic, presence of the International Space Station), medium Earth orbits or MEO (traffic, operating satellites, wastes), geostationary Earth orbit or GEO (traffic, operating satellites, wastes). It also discusses wastes and bacteria present on the moon (due to Apollo missions or to crash tests). It evokes how space and nuclear industry is concerned, and discusses the re-entry issue (radioactive boomerang, metallic boomerang). It also indicates elements of international law

Globalization of Japanese steel industry. Part 1. Materials; Tekkogyo no kokusaika. 1. Zairyo

Energy Technology Data Exchange (ETDEWEB)

Aramaki, T. [Nippon Steel Corp., Tokyo (Japan)

1995-01-01

This paper discusses the globalization of the Japanese steel industry from the viewpoint of maintenance of international competitive potential. In the steel industry, remarkable technology innovation is currently occurring in the production process. The direct iron ore smelting process and strip caster process are being developed. These innovative technologies are characterized by processes having simplified facilities and lower fixed costs. A large problem of Japanese steel industry is the maintenance of competitive potential in the international price. For the purpose of the cost reduction, profitability improvement efforts have been made, as for the cut of research and development cost, consolidation of standards, intensive production, specialization among undertakings, cooperations, etc. Additionally, accompanied with the overseas production of steel consumers, the overseas steel production has been conducted. The overseas production is currently focused on Asia. Significance of the Japanese steel industry in Asia is provided from the viewpoint of accumulating technological know-how, establishment of new technologies, acquisition of operation technologies, promotion of talented persons for industries, etc. 12 refs., 7 figs., 3 tabs.

Development of an industrialized space-frame system for the support of medium to large solar collector arrays

Energy Technology Data Exchange (ETDEWEB)

1982-11-01

A low-cost industrialized space-frame system suitable for the economical support of medium to large solar collector arrays was designed following a study of building types, collector interface conditions, structural design requirements, and market and procurement factors. The system consists of a series of welded truss modular sections which may be bolted together in the field to create a support structure with a span capability up to 25 m, thus minimizing expensive structural beams and roof penetrations. Collectors can be readily attached to top and bottom channels. The system meets all current government specifications for collector support. A full-size prototype was built to prove the concept and identify any fabrication and on-site assembly problems. Collectors were attached to test collector interface conditions, and a manufacturing strategy developed. 24 figs., 3 tabs.

Days on safety of industrial radiographic controls

International Nuclear Information System (INIS)

2008-01-01

This program is divided in three parts: the context and the regulations, the preparation and the implementation, the tools of prevention and the initiatives and the perspectives.In the first part devoted to the context and regulation are: the context by the Authority of nuclear safety (A.S.N.), the regulation referential, the transport of gamma-graphs; in the second part are the distribution of liabilities, materials and associated requirements, the feedback of incidents and exploitation of it, training and base requirements, works of S.F.R.P./C.O.F.R.E.N.D. and the A.S.N. position; the third part includes help to evaluation of risks at working places of industry radiologists, dosimetry study of a working place, guide to evaluate oneself; the fourth part devoted to the initiatives and the perspectives are: regional experiences charters of good practices in industry radiography, integration of works and deployment by the members of the C.O.F.R.E.N.D., perspectives in matter of prevention of occupational risks in the area of industry radiography. (N.C.)

Electromagnetic compatibility (EMC) part 6-2 : generic standards : immunity for industrial environments

CERN Document Server

International Electrotechnical Commission. Geneva

1999-01-01

Applies to electrical and electronic apparatus intended for use in industrial environments, for which no designed product or product-family immunity standard exists. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered, in relation to continuous and transient, conducted and radiated disturbances, including electrostatic discharges. Test requirements are specified for each port considered. Apparatus intended to be used in industrial locations are characterized by the existence of one or more of the following: - a power network exists powered by a high or medium voltage power transformer for the supply of an installation feeding manufacturing or similar plant; - industrial, scientific and medical (ISM) apparatus; - heavy inductive or capacitive loads are frequently switched; - currents and associated magnetic fields are high.

Social capital for industrial development: operationalizing the concept

NARCIS (Netherlands)

P. Knorringa (Peter); I.P. van Staveren (Irene)

2006-01-01

textabstractThe present report on Social capital for industrial development: operationalizing the concept is part of the broader Combating Marginalization and Poverty through Industrial Development (COMPID), research programme of the United Nations Industrial Development Organization (UNIDO),

Upstream petroleum industry financial conditions and distribution of industry generated revenue

International Nuclear Information System (INIS)

Anon.

1996-01-01

A review of profitability of Canada's upstream petroleum industry and of the direct fiscal burden (all payments to governments) on the industry was presented based on a study conducted during June-September 1996. Information was collected from 200 companies that represent over 90 per cent of the total oil and gas production revenue and most of the refining and fuel sales. Part 2 of the review examined taxes and other payments to government by 58 companies. It was concluded that the Canadian oil and gas industry is a major contributor of taxes to all three levels of government. While the industry has made concerted efforts to reduce its controllable costs and increase its profitability, it is claimed that Canadian petroleum industry profit margins are extremely low. A plea was made to all levels of governments to consider the highly competitive nature of the industry, the constantly changing market forces, shifts in world politics, regulatory trends, currency values and technology that affect the industry, and the high risks inherent in exploration and development prior to establishing ever-increasing claims on the industry's dwindling profits. 22 tabs., 17 figs

Preservation of Near-Earth Space for Future Generations

Science.gov (United States)

Simpson, John A.

2007-05-01

List of contributors; Preface; Part I. Introduction: 1. Introduction J. A. Simpson; Part II. Defining the Problem: 2. The Earth satellite population: official growth and constituents Nicholas L. Johnson; 3. The current and future environment: an overall assessment Donald J. Kessler; 4. The current and future space debris environment as assessed in Europe Dietrich Rex; 5. Human survivability issues in the low Earth orbit space debris environment Bernard Bloom; 6. Protecting the space environment for astronomy Joel R. Primack; 7. Effects of space debris on commercial spacecraft - the RADARSAT example H. Robert Warren and M. J. Yelle; 8. Potential effects of the space debris environment on military space systems Albert E. Reinhardt; Part III. Mitigation of and Adaptation to the Space Environment: Techniques and Practices: 9. Precluding post-launch fragmentation of delta stages Irvin J. Webster and T. Y. Kawamura; 10. US international and interagency cooperation in orbital debris Daniel V. Jacobs; 11. ESA concepts for space debris mitigation and risk reduction Heiner Klinkrad; 12. Space debris: how France handles mitigation and adaptation Jean-Louis Marcé; 13. Facing seriously the issue of protection of the outer space environment Qi Yong Liang; 14. Space debris - mitigation and adaptation U. R. Rao; 15. Near Earth space contamination and counteractions Vladimir F. Utkin and S. V. Chekalin; 16. The current and future space debris environment as assessed in Japan Susumu Toda; 17. Orbital debris minimization and mitigation techniques Joseph P. Loftus Jr, Philip D. Anz-Meador and Robert Reynolds; Part IV. Economic Issues: 18. In pursuit of a sustainable space environment: economic issues in regulating space debris Molly K. Macauley; 19. The economics of space operations: insurance aspects Christopher T. W. Kunstadter; Part V. Legal Issues: 20. Environmental treatymaking: lessons learned for controlling pollution of outer space Winfried Lang; 21. Regulation of orbital

Product Lifecycle Management and Sustainable Space Exploration

Science.gov (United States)

Caruso, Pamela W.; Dumbacher, Daniel L.; Grieves, Michael

2011-01-01

This slide presentation reviews the use of product lifecycle management (PLM) in the general aerospace industry, its use and development at NASA and at Marshall Space Flight Center, and how the use of PLM can lead to sustainable space exploration.

Function spaces, 1

CERN Document Server

Pick, Luboš; John, Oldrich; Fucík, Svatopluk

2012-01-01

This is the first part of the second revised and extended edition of a well established monograph. It is an introduction to function spaces defined in terms of differentiability and integrability classes. It provides a catalogue of various spaces and benefits as a handbook for those who use function spaces to study other topics such as partial differential equations. Volum

Historical space steps of Turkey: It is high time to establish the Turkish space agency

Science.gov (United States)

Ercan, Cihan; Kale, İzzet

2017-01-01

This paper discusses the importance of space in today's space driven world, the current space activities of Turkey, its space organizations with legislation background information and calls for the necessity for the establishment of the Turkish Space Agency (TSA). Firstly, the importance of space is given which is followed by a brief background and current space activities in Turkey. Then, the answers to why Turkey needs a National Space Agency are outlined by stating its expected role and duties. Additionally, the framework for space policy for Turkey is proposed and the findings are compared with other developing regional space actors. Lastly, it is proposed and demonstrated that Turkey is on the right track with its space policy and it is suggested that the establishment of the TSA is critical both for a coherent space policy and progress as well as the successful development of its national space industry, security and international space relations.

Industrial Irradiation of Polymers: Systems and Concepts

International Nuclear Information System (INIS)

Mittendorfer, J.

2006-01-01

This paper provides a systematic survey of systems and concepts used in the industrial irradiation of polymers. It consists basically of three parts: in the first part, different types of applications like wires and cables, pipes and engineering plastics are discussed and the associated irradiation systems analyzed and highlighted according their basics modules. These are identified as the radiation source, the product handling system, process control and facility/shielding layout. In the second part, the irradiation process design is reviewed in detail. The discussion starts with the requirement analysis, e.g. the desired polymer parameters and effects, continues with a process development roadmap and concludes with process verification and validation. Special attention is drawn to process control, which plays an important role in industrial irradiation technology. The use of mathematical modeling to facilitate and support process and system design is discussed as well and several examples are given which demonstrate their capabilities. In the third part, the design of a electron beam facility for the irradiation of small plastic parts for the automotive industry is worked out in detail. Besides system and product handling considerations, throughput and economical estimates are provided. The paper concludes with a summary of the design and concept bullets which proved to be important in history and can facilitate new developments which will enhance the potential of industrial polymer irradiation

A Moral (Normative) Framework for the Judgment of Actions and Decisions in the Construction Industry and Engineering: Part II.

Science.gov (United States)

Alkhatib, Omar J

2017-12-01

The construction industry is typically characterized as a fragmented, multi-organizational setting in which members from different technical backgrounds and moral values join together to develop a particular business or project. The most challenging obstacle in the construction process is to achieve a successful practice and to identify and apply an ethical framework to manage the behavior of involved specialists and contractors and to ensure the quality of all completed construction activities. The framework should reflect a common moral ground for myriad people involved in this process to survive and compete ethically in today's turbulent construction market. This study establishes a framework for moral judgment of behavior and actions conducted in the construction process. The moral framework provides the basis of judging actions as "moral" or "immoral" based on three levels of moral accountability: personal, professional, and social. The social aspect of the proposed framework is developed primarily from the essential attributes of normative business decision-making models identified in the literature review and subsequently incorporates additional attributes related to professional and personal moral values. The normative decision-making models reviewed are based primarily on social attributes as related to moral theories (e.g., utilitarianism, duty, rights, virtue, etc.). The professional and moral attributes are established by identifying a set of common moral values recognized by professionals in the construction industry and required to prevent common construction breaches. The moral framework presented here is the complementary part of the ethical framework developed in Part I of this article and is based primarily on the personal behavior or the moral aspect of professional responsibility. The framework can be implemented as a form of preventive personal ethics, which would help avoid ethical dilemmas and moral implications in the first place

Performance of Automotive Industry under Financial Crisis

OpenAIRE

Cheng, Xiaomeng

2012-01-01

Since the financial crisis, automobile industry faces severe problems such as sale decline and cash shortage. Some corporations such as General Motors also went to bankrupt. The whole industry was under financial distress and this also affected other related industries such as part manufacturers and suppliers. Most literatures investigated the industry performance by measures such as sale and production volume, export record or GDP contribution. Few of them examine the industrial performance ...

Space Sciences Education and Outreach Project of Moscow State University

Science.gov (United States)

Krasotkin, S.

2006-11-01

sciences educational activity of Moscow State University is a non-profit project and is open for all interested parties. “Space schools” for university teachers and students were held in the autumn of 2004 and 2005. The main objective of those schools was to attract interest in space research. Tutors and students who took part in these schools had never before been involved in the space sciences. The idea behind these schools was to join forces: Moscow State University scientists gave space science lectures, students from different universities (Ulianovsk, Samara, Kostroma and other Russian universities) performed the work (prepared educational material) and their university teachers managed the students. After participating in these schools, both students and teachers started to study space science related topics emphasizing the success of these schools. It is important for the educational community to understand what skills future space scientists and space industry employees must be equipped with. In the next years, emphasis is to be placed on space science education at all educational levels and better communication should be practiced between universities and industry.

Safety Criteria for the Private Spaceflight Industry

Science.gov (United States)

Quinn, Andy; Maropoulos, Paul

2010-09-01

The Federal Aviation Administration(FAA) Office of Commercial Space Transportation(AST) has set specific rules and generic guidelines to cover experimental and operational flights by industry forerunners such as Virgin Galactic and XCOR. One such guideline Advisory Circular(AC) 437.55-1[1] contains exemplar hazard analyses for spacecraft designers and operators to follow under an experimental permit. The FAA’s rules and guidelines have also been ratified in a report to the United States Congress, Analysis of Human Space Flight Safety[2] which cites that the industry is too immature and has ‘insufficient data’ to be proscriptive and that ‘defining a minimum set of criteria for human spaceflight service providers is potentially problematic’ in order not to ‘stifle the emerging industry’. The authors of this paper acknowledge the immaturity of the industry and discuss the problematic issues that Design Organisations and Operators now face.

Hyperbolic statics in space-time

OpenAIRE

Pavlov, Dmitry; Kokarev, Sergey

2014-01-01

Based on the concept of material event as an elementary material source that is concentrated on metric sphere of zero radius --- light-cone of Minkowski space-time, we deduce the analog of Coulomb's law for hyperbolic space-time field universally acting between the events of space-time. Collective field that enables interaction of world lines of a pair of particles at rest contains a standard 3-dimensional Coulomb's part and logarithmic addendum. We've found that the Coulomb's part depends on...

Space Weather Drivers in the ACE Era

Science.gov (United States)

Vogt, M.; Puhl-Quinn, P.; Jordanova, V. K.; Smith, C. W.; Cohen, C. M.

2004-12-01

The Advanced Composition Explorer (ACE) spacecraft was launched Aug.~25, 1997 [Stone et al., 1998]. Beginning shortly after launch and continuing to the present day ACE has provided real-time data telemetry of solar wind conditions upstream of the Earth. The real-time data includes solar wind speed and density, magnetic field direction and magnitude, and a range of energetic particle intensities [Zwickl et al., 1999]. The real-time data product is provided within 5 minutes of observation and many partners from both industry and science use these data for a variety of purposes. The most common purpose of practical industrial application involves mitigation of lost services arising from magnetospheric storm activity. Many space weather efforts are directed at providing improved predictions of magnetospheric response that can be applied to real-time data in the hope of better predicting the vulnerability and required action of industry to approaching disturbances. It therefore seems prudent that following 6 years of activity including one solar maximum period we should evaluate the nature and strength of the largest disturbances observed with the hope of better assessing the industrial response. Simply put: ``Did ACE observe disturbances that were as large as those seen previously during the space age?'' If not, it may be the case that industry must evaluate its response to the real-time warnings and not become complacent by the simple act of survival. We compare the most intense space weather events of the ACE era with those recorded on the Omnitape data set spanning 40+ years of spacecraft measurements in the near-Earth environment. We compare both magnetospheric response parameters and solar wind drivers. In addition, we compare the large energetic particle events over the same time frame. Stone, E.~C., et al., Space Science Rev., 86(1-4), 357-408, 1998. Zwickl, R.~D., et al., Space Science Rev., 86(1-4), 633-648, 1998.

Industrial sector

International Nuclear Information System (INIS)

Ainul Hayati Daud; Hazmimi Kasim

2010-01-01

The industrial sector is categorized as related to among others, the provision of technical and engineering services, supply of products, testing and troubleshooting of parts, systems and industrial plants, quality control and assurance as well as manufacturing and processing. A total of 161 entities comprising 47 public agencies and 114 private companies were selected for the study in this sector. The majority of the public agencies, 87 %, operate in Peninsular Malaysia. The remainders were located in Sabah and Sarawak. The findings of the study on both public agencies and private companies are presented in subsequent sections of this chapter. (author)

Space technology transfer to developing countries: opportunities and difficulties

Science.gov (United States)

Leloglu, U. M.; Kocaoglan, E.

Space technology, with its implications on science, economy and security, is mostly chosen as one of the priority areas for technological development by developing countries. Most nations aspiring to begin playing in the space league prefer technology transfer programs as a first step. Decreasing initial costs by small satellite technology made this affordable for many countries. However, there is a long way from this first step to establishment of a reliable space industry that can both survive in the long term with limited financial support from the government and meet national needs. This is especially difficult when major defense companies of industrialized countries are merging to sustain their competitiveness. The prerequisites for the success are implementation of a well-planned space program and existence of industrialization that can support basic testing and manufacturing activities and supply qualified manpower. In this study, the difficulties to be negotiated and the vicious circles to be broken for latecomers, that is, developing countries that invest on space technologies are discussed. Especially, difficulties in the technology transfer process itself, brain drain from developing countries to industrialized countries, strong competition from big space companies for domestic needs, costs of establishing and maintaining an infrastructure necessary for manufacturing and testing activities, and finally, the impact of export control will be emphasized. We will also try to address how and to what extent collaboration can solve or minimize these problems. In discussing the ideas mentioned above, lessons learned from the BILSAT Project, a technology transfer program from the UK, will be referred.

Chemistry-Climate Interactions in the Goddard Institute for Space Studies General Circulation Model. 2; New Insights into Modeling the Pre-Industrial Atmosphere

Science.gov (United States)

Grenfell, J. Lee; Shindell, D. T.; Koch, D.; Rind, D.; Hansen, James E. (Technical Monitor)

2002-01-01

We investigate the chemical (hydroxyl and ozone) and dynamical response to changing from present day to pre-industrial conditions in the Goddard Institute for Space Studies General Circulation Model (GISS GMC). We identify three main improvements not included by many other works. Firstly, our model includes interactive cloud calculations. Secondly we reduce sulfate aerosol which impacts NOx partitioning hence Ox distributions. Thirdly we reduce sea surface temperatures and increase ocean ice coverage which impact water vapor and ground albedo respectively. Changing the ocean data (hence water vapor and ozone) produces a potentially important feedback between the Hadley circulation and convective cloud cover. Our present day run (run 1, control run) global mean OH value was 9.8 x 10(exp 5) molecules/cc. For our best estimate of pre-industrial conditions run (run 2) which featured modified chemical emissions, sulfate aerosol and sea surface temperatures/ocean ice, this value changed to 10.2 x 10(exp 5) molecules/cc. Reducing only the chemical emissions to pre-industrial levels in run 1 (run 3) resulted in this value increasing to 10.6 x 10(exp 5) molecules/cc. Reducing the sulfate in run 3 to pre-industrial levels (run 4) resulted in a small increase in global mean OH (10.7 x 10(exp 5) molecules/cc). Changing the ocean data in run 4 to pre-industrial levels (run 5) led to a reduction in this value to 10.3 x 10(exp 5) molecules/cc. Mean tropospheric ozone burdens were 262, 181, 180, 180, and 182 Tg for runs 1-5 respectively.

Economic statistics for the mining and metallurgical industries: 1990. Statistique economique des industries extractives et metallurgiques annee 1990

Energy Technology Data Exchange (ETDEWEB)

Rzonzef, L.

1991-01-01

Provides economic statistics for the Belgian mining and metallurgical industries in 1990. The review is divided into 4 parts: the extractive industries (including an analysis of the coal market and mines, quarries and associated industries); coke and briquette making; metallurgy (i.e. blast furnaces, steel making, rolling mills and manpower and materials consumption in the steel industry); and the extraction of sand from the Belgian continental shelf. 17 tabs.

"Lomonosov" Satellite—Space Observatory to Study Extreme Phenomena in Space

Science.gov (United States)

Sadovnichii, V. A.; Panasyuk, M. I.; Amelyushkin, A. M.; Bogomolov, V. V.; Benghin, V. V.; Garipov, G. K.; Kalegaev, V. V.; Klimov, P. A.; Khrenov, B. A.; Petrov, V. L.; Sharakin, S. A.; Shirokov, A. V.; Svertilov, S. I.; Zotov, M. Y.; Yashin, I. V.; Gorbovskoy, E. S.; Lipunov, V. M.; Park, I. H.; Lee, J.; Jeong, S.; Kim, M. B.; Jeong, H. M.; Shprits, Y. Y.; Angelopoulos, V.; Russell, C. T.; Runov, A.; Turner, D.; Strangeway, R. J.; Caron, R.; Biktemerova, S.; Grinyuk, A.; Lavrova, M.; Tkachev, L.; Tkachenko, A.; Martinez, O.; Salazar, H.; Ponce, E.

2017-11-01

The "Lomonosov" space project is lead by Lomonosov Moscow State University in collaboration with the following key partners: Joint Institute for Nuclear Research, Russia, University of California, Los Angeles (USA), University of Pueblo (Mexico), Sungkyunkwan University (Republic of Korea) and with Russian space industry organizations to study some of extreme phenomena in space related to astrophysics, astroparticle physics, space physics, and space biology. The primary goals of this experiment are to study: Ultra-high energy cosmic rays (UHECR) in the energy range of the Greizen-Zatsepin-Kuzmin (GZK) cutoff; Ultraviolet (UV) transient luminous events in the upper atmosphere; Multi-wavelength study of gamma-ray bursts in visible, UV, gamma, and X-rays; Energetic trapped and precipitated radiation (electrons and protons) at low-Earth orbit (LEO) in connection with global geomagnetic disturbances; Multicomponent radiation doses along the orbit of spacecraft under different geomagnetic conditions and testing of space segments of optical observations of space-debris and other space objects; Instrumental vestibular-sensor conflict of zero-gravity phenomena during space flight. This paper is directed towards the general description of both scientific goals of the project and scientific equipment on board the satellite. The following papers of this issue are devoted to detailed descriptions of scientific instruments.

Air Force Space Situational Awareness

Science.gov (United States)

2018-03-13

time sensitivity and CyberWorx capacity. One method, which maximizes solution agility and the educational benefit to warfighters and industry...how the Air Force might best exploit commercial, academic, and foreign SSA data to improve space outcomes. Question Background & Participants Modern ...in industry and even in their personal lives. CyberWorx was asked to address the challenges of incorporating non- traditional (open source, academic

Interaction of corrosion defects in pipelines – Part 1: Fundamentals

International Nuclear Information System (INIS)

Benjamin, Adilson C.; Freire, José Luiz F.; Vieira, Ronaldo D.; Cunha, Divino J.S.

2016-01-01

Corrosion defects, also called metal loss due to corrosion, are frequently found in carbon steel pipelines. Corrosion defects may occur singly or in colonies. Usually the failure pressure of a colony of closely spaced corrosion defects is smaller than the failure pressures that the defects would attain if they were isolated. This reduction in the corroded pipe pressure strength is due to the interaction between adjacent defects. The interaction of corrosion defects in pipelines is the subject of two companion papers. In the present paper (the Part 1 paper) a literature review and the fundamentals of interaction of corrosion defects in pipelines are presented. In the subsequent paper (the Part 2 paper) initially the database of corroded pipe tests generated during the MTI JIP is described. Then the failure pressures contained in the MTI JIP database of corroded pipe tests are compared with those predicted by six of the currently available assessment methods. MTI JIP is the acronym for Mixed Type Interaction Joint Industry Project.

Whole effluent assessment of industrial wastewater for determination of BAT compliance. Part 2: metal surface treatment industry.

Science.gov (United States)

Gartiser, Stefan; Hafner, Christoph; Hercher, Christoph; Kronenberger-Schäfer, Kerstin; Paschke, Albrecht

2010-06-01

maximum conductivity of the samples was 43,700 microS cm(-1) and indicates that salts might contribute to the overall toxicity. Half of the wastewater samples proved to be biologically well treatable in the Zahn-Wellens test with COD elimination above 80%, whilst the others were insufficiently biodegraded (COD elimination 28-74%). After the pretreatment in the Zahn-Wellens test, wastewater samples from four (out of ten) companies were extremely ecotoxic especially to algae (maximum LID(A) = 16,384). Three wastewater samples were genotoxic in the umu test. Applying the rules for salt correction of test results as allowed in the German Wastewater Ordinance, only a small part of toxicity could be attributed to salts. Considering the PBS, wastewater from the metal surface treatment industry exhibited very low levels of PBS. In one factory, the origin of ecotoxicity has been attributed to the organosulphide dimethyldithiocarbamate (DMDTC) used as a water treatment chemical for metal precipitation. The assumption based on rough calculation of input of the organosulphide into the wastewater was confirmed in practice by testing its ecotoxicity at the corresponding dilution ratio after pretreatment in the Zahn-Wellens test. Whilst the COD elimination of DMDTC was only 32% in 7 days, the pretreated sample exhibited a high ecotoxicity to algae (LID(A) = 1,536) and luminescent bacteria (LID(lb) = 256). Comparative data from wastewater surveillance by authorities (data from 1993 to 2007) confirmed the range of ecotoxicity observed in the study. Whilst wastewater from the metal surface treatment industry usually did not exhibit ecotoxicity (median LID 1-2), the maximum LID values reported for the algae, daphnia and luminescent bacteria tests were very high (LID(A) up to 3,072, LID(D) up to 512 and LID(lb) up to 2,048). DMDTC was found to be one important source of ecotoxicity in galvanic wastewater. DMDTC is added in surplus, and according to the supplier, the amount in excess should

Antecedents affecting Thai auto parts enterprise organizational performance

Directory of Open Access Journals (Sweden)

Somyos Phoosawad

2017-04-01

Full Text Available Thailand is ranked 12th in the world in automotive production, with 57 of the world’s top 100 auto parts manufacturers having factories in Thailand. The industry employs 525,000 workers and represents 12% of Thailand’s gross domestic production (GDP. The automotive industry has also been identified as a core industry in the transition to Thailand 4.0, with digitally enabled, knowledge workers key to its success. This study, therefore, undertook structural equation modeling to conduct an analysis of variables affecting Thai auto parts industry enterprises organizational performance. Using purposive sampling, 320 executives in the Thai automotive industry were selected whose responses to the question constructs were captured using a five-point Likert type agreement scale. Results determined that leadership skills have a significant effect on management skills, and that management skills have a direct and positive effect on management innovation. Additionally, innovation thus far has been viewed as an external process, primarily in response to customer demands or ‘home office’ requirements. Research findings, therefore, suggest that the Thai auto parts industry must develop innovative leadership management which is crucial to sustaining a competitive, domestic capability.

Correlation indices physical space of soil and productivity of fruit tomato industry

Directory of Open Access Journals (Sweden)

Danilo Gomes de Oliveira

2017-12-01

Full Text Available With mechanization at all stages of crop management, the soil began to receive a higher surface load, which causes changes in its physical properties with possible production impacts. Thus, the objective of this work was to evaluate the variability and spatial correlation of the physical attributes of a Red Latosol with the productivity of industrial tomatoes. For this, a sample mesh was assembled using a global receiver positioning system (GPS, with 84 pairs of spaced apart 80 x 80 m points. After the mesh construction, samples in the 0.00-0.20 m layer were collected in the field to measure the physical attributes of the soil and plant data. The variables measured were: soil density (Ds, soil penetration resistance (PR, soil texture and tomato productivity. The values obtained were analyzed using geostatistics, and were classified according to the degree of spatial dependence. Then, using the ordinary kriging interpolation method and ordinary cokriging, the values for nonsampled sites were estimated, allowing the mapping of isovalues and the definition of management zones in the field. The spatial correlation of the physical attributes with the production components by the ordinary Cokriging method verified spatial correlation only between attributes (soil x soil density and sand content. The use of geostatistics and the construction of the maps by means of kriging and ordinary cokrigation allowed to identify different management zones, that is, the variability of soil attributes and productivity.

My Space- a collaboration between Arts & Science to create a suite of informal interactive public engagement initiatives.

Science.gov (United States)

Shaw, Niamh, , Dr.; McSweeney, Clair; Smith, Niall, , Dr.; O'Neill, Stephanie; Foley, Cathy; Crawley, Joanna; Phelan, Ronan; Colley, Dan; Henderson, Clare; Conroy, Lorraine

2015-04-01

A suite of informal interactive public engagement initiatives, entitled 'MySpace' was created, to promote the importance of Earth science and Space exploration, to ignite curiosity and discover new and engaging platforms for science in the Arts & in STEM Education, and to increase awareness of careers in Ireland's Space and Earth Science industries. Site visits to research centres in Ireland & abroad, interviews with scientists, engineers, and former astronauts were conducted over a 6 month period. A suite of performance pieces emerged from this development phase, based on Dr. Shaw's personal documented journey and the dissemination of her research. These included: 1. 'To Space'- A live multimedia theatre performance aimed at the general public & young adult. Initially presented as a 'Work In Progress' event at The Festival of Curiosity, the full theatre show 'To Space' premiered at Science Gallery, Dublin as part of Tiger Dublin Fringe Arts Festival. Response to the piece was very strong, indicated by audience response, box office sales and theatre reviews in national press and online. A national and international tour is in place for 2015. To Space was performed a total of 10 times and was seen by 680 audiences. 2. An adapted piece for 13-17 year old students -'ToSpace for Secondary Schools'- to increase awareness of Ireland's involvement in Space Exploration & to encourage school leavers to dream big. This show toured nationally as part of World Space week and Science week events in conjunction with ESERO Ireland, CIT Blackrock Castle Observatory, Cork, Armagh Planetarium & Dunsink Observatory. It was performed 12 times and was seen by 570 students. 3. 'My Place in Space', created for families from the very old (60 +) to the very young (3yrs +), this highly interactive workshop highlighted the appeal of science through the wonders of our planet and its place in Space. Presented at Festival of Curiosity, the Mallow Science Fair and at Science week 2014, this

FORECASTING OF PRODUCTION OUTPUT FOR LIGHT INDUSTRY ENTERPRISES WITH PURPOSE TO DETERMINE THEIR POWER RESOURCES REQUIREMENTS. Part 1

Directory of Open Access Journals (Sweden)

V. N. Romaniuk

2015-01-01

Full Text Available The paper presents an interest for those specialists who are involved in solution of efficiency problems in light industry of Belarus as one of the significant industries that forms an economic situation in the Republic, its export potential and social climate. It is extremely relevant for the Belarusian enterprises to reduce production costs in order to preserve and strengthen positions in the light industry market. Operating capacities for production of natural, synthetic textile and knit-wear materials and their subsequent treatment are in many respects unjustifiably energy intensive. Nowadays the only acceptable solution of the problem for reduction of production costs is to decrease its energy component. Such approach requires transition to creation of modern heat and power supply systems at heat technology enterprises.The most important sub-system of the enterprises is own combined production of energy flows of secondary electrical and heat energy, freeze. There is a complex of problems that arise during designing process of tri-generation unit. One of the most important problems presupposes determination of a base load demand and capacity of every energy flow generated by an energy source. The solution is directly related to production output, which in its turn is determined by the requirements of sales markets. Due to various reasons the markets have their own specificity for the enterprises under consideration. It is proposed to use statistical methods for searching requirements. In this connection it is necessary to take into account industry development rate (pre-determined by State Programs, Plans, Governmental solutions, including directive instructions, production volumes of competitive goods and actual goods situation on the sales market.The paper presents the first part of the executed complex investigations which are directed on the development of scientifically-substantiated proposals for higher energy efficiency of the

Nuclear-electric power in space

International Nuclear Information System (INIS)

Truscello, V.C.; Davis, H.S.

1984-01-01

Because direct-broadcast satellites, air-traffic-control radar satellites, industrial processing on subsequent versions of the space station, and long range excursions to other planets using nuclear-electric propulsion systems, all space missions for which current power-supply systems are not sufficient. NASA and the DOE therefore have formed a joint program to develop the technology required for nuclear-reactor space power plants. After investigating potential space missions in the given range, the project will develop the technology to build such systems. High temperatures pose problems, ''hot shoes'' and ''cold shoes'', a Stirling engine dynamic system, and critical heat-transfer problems are all discussed. The nuclear reactor system for space as now envisioned is schematicized

The American nuclear power industry. A handbook

International Nuclear Information System (INIS)

Pearman, W.A.; Starr, P.

1984-01-01

This book presents an overview of the history and current organization of the American nuclear power industry. Part I focuses on development of the industry, including the number, capacity, and type of plants in commercial operation as well as those under construction. Part II examines the safety, environmental, antitrust, and licensing issues involved in the use of nuclear power. Part III presents case studies of selected plants, such as Three Mile Island and Seabrook, to illustrate some of the issues discussed. The book also contains a listing of the Nuclear Regulatory Commission libraries and a subject index

Comparison of Requirements for Composite Structures for Aircraft and Space Applications

Science.gov (United States)

Raju, Ivatury S.; Elliot, Kenny B.; Hampton, Roy W.; Knight, Norman F., Jr.; Aggarwal, Pravin; Engelstad, Stephen P.; Chang, James B.

2010-01-01

In this report, the aircraft and space vehicle requirements for composite structures are compared. It is a valuable exercise to study composite structural design approaches used in the airframe industry and to adopt methodology that is applicable for space vehicles. The missions, environments, analysis methods, analysis validation approaches, testing programs, build quantities, inspection, and maintenance procedures used by the airframe industry, in general, are not transferable to spaceflight hardware. Therefore, while the application of composite design approaches from aircraft and other industries is appealing, many aspects cannot be directly utilized. Nevertheless, experiences and research for composite aircraft structures may be of use in unexpected arenas as space exploration technology develops, and so continued technology exchanges are encouraged.

The new gold rush the riches of space beckon!

CERN Document Server

Pelton, Joseph N

2017-01-01

This book captures the most exciting advances in the harnessing of space as a global resource. The authors track the growing number of space businesses and opportunities for investors, and the many possible benefits of spaceplanes, space stations and even space colonies. The authors also discuss the need for more regulatory reform. Companies like Planetary Resources are now forming to find mineral-rich asteroids and bring back new riches to Earth. Solar power satellites in the next few years will start to beam clean energy back to Earth, to meet the growing demands of a still-developing world. Innovative space industries are vital to the survival of modern human life, and the authors demonstrate what can be done to encourage the growing of the "New Space" frontier. From lassoing and then mining asteroids to developing new methods of defending the planet from space hazards and setting up new hotels and adventures for tourists in space, this new industry will have profound effects on Earth, especially on its ec...

Radon space techniques for the evaluation of industrial tomography systems

International Nuclear Information System (INIS)

Burge, R.E.; Wombell, R.J.; Belchamber, R.M.; Betteridge, D.; Lilley, T.

1987-01-01

Computerised tomography (CT) is a powerful tool in medicine, and would be well suited to a wide range of industrial applications, particularly non-destructive testing. However, the very diversity of uses makes the production of a standardised scanner impossible. Systems for an industrial use will have to be designed with a problem in mind. An approach is presented for the analysis of CT scanning systems to help in the design problem. It first describes a system in terms of the sampling of the Radon transform of the object and then uses this information to produce a spatial description of the performance of a scanning system in terms of data collection. This description is called a resolution map and it is shown how the resolution map can be related to the object under study. (author)

Singular points in moduli spaces of Yang-Mills fields

International Nuclear Information System (INIS)

Ticciati, R.

1984-01-01

This thesis investigates the metric dependence of the moduli spaces of Yang-Mills fields of an SU(2) principal bundle P with chern number -1 over a four-dimensional, simply-connected, oriented, compact smooth manifold M with positive definite intersection form. The purpose of this investigation is to suggest that the surgery class of the moduli space of irreducible connections is, for a generic metric, a Z 2 topological invariant of the smooth structure on M. There are three main parts. The first two parts are local analysis of singular points in the moduli spaces. The last part is global. The first part shows that the set of metrics for which the moduli space of irreducible connections has only non-degenerate singularities has codimension at least one in the space of all metrics. The second part shows that, for a one-parameter family of moduli spaces in a direction transverse to the set of metrics for which the moduli spaces have singularities, passing through a non-degenerate singularity of the simplest type changes the moduli space by a cobordism. The third part shows that generic one-parameter families of metrics give rise to six-dimensional manifolds, the corresponding family of moduli spaces of irreducible connections. It is shown that when M is homeomorphic to S 4 the six-dimensional manifold is a proper cobordism, thus establishing the independence of the surgery class of the moduli space on the metric on M

Challenges for future space power systems

International Nuclear Information System (INIS)

Brandhorst, H.W. Jr.

1989-01-01

Forecasts of space power needs are presented. The needs fall into three broad categories: survival, self-sufficiency, and industrialization. The cost of delivering payloads to orbital locations and from Low Earth Orbit (LEO) to Mars are determined. Future launch cost reductions are predicted. From these projections the performances necessary for future solar and nuclear space power options are identified. The availability of plentiful cost effective electric power and of low cost access to space are identified as crucial factors in the future extension of human presence in space

Supporting industries energy and environmental profile

Energy Technology Data Exchange (ETDEWEB)

None, None

2005-09-21

As part of its Industries of the Future strategy, the Industrial Technologies Program within the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy works with energy-intensive industries to improve efficiency, reduce waste, and increase productivity. These seven Industries of the Future (IOFs) – aluminum, chemicals, forest products, glass, metal casting, mining, and steel – rely on several other so-called “supporting industries” to supply materials and processes necessary to the products that the IOFs create. The supporting industries, in many cases, also provide great opportunities for realizing energy efficiency gains in IOF processes.

Space Research in the Federal Republic of Germany.

Science.gov (United States)

Preuss, Karl-Heinz, Ed.; Simen, Rolf H., Ed.

The Federal Republic of Germany's space policy is designed to promote basic research, contribute to the development of space technology, and apply the findings in the public and private sectors. It is also aimed at enhancing the competitiveness of the West German space industry and helping countries of the Third World to solve their development…

Automation and robotics - Key to productivity. [in industry and space

Science.gov (United States)

Cohen, A.

1985-01-01

The automated and robotic systems requirements of the NASA Space Station are prompted by maintenance, repair, servicing and assembly requirements. Trend analyses, fault diagnoses, and subsystem status assessments for the Station's electrical power, guidance, navigation, control, data management and environmental control subsystems will be undertaken by cybernetic expert systems; this will reduce or eliminate on-board or ground facility activities that would otherwise be essential, enhancing system productivity. Additional capabilities may also be obtained through the incorporation of even a limited amount of artificial intelligence in the controllers of the various Space Station systems.

Geographic prediction of tuberculosis clusters in Fukuoka, Japan, using the space-time scan statistic

Energy Technology Data Exchange (ETDEWEB)

Daisuke Onozuka; Akihito Hagihara [Fukuoka Institute of Health and Environmental Sciences, Fukuoka (Japan). Department of Information Science

2007-07-01

Tuberculosis (TB) has reemerged as a global public health epidemic in recent years. Although evaluating local disease clusters leads to effective prevention and control of TB, there are few, if any, spatiotemporal comparisons for epidemic diseases. TB cases among residents in Fukuoka Prefecture between 1999 and 2004 (n = 9,119) were geocoded at the census tract level (n = 109) based on residence at the time of diagnosis. The spatial and space-time scan statistics were then used to identify clusters of census tracts with elevated proportions of TB cases. In the purely spatial analyses, the most likely clusters were in the Chikuho coal mining area (in 1999, 2002, 2003, 2004), the Kita-Kyushu industrial area (in 2000), and the Fukuoka urban area (in 2001). In the space-time analysis, the most likely cluster was the Kita-Kyushu industrial area (in 2000). The north part of Fukuoka Prefecture was the most likely to have a cluster with a significantly high occurrence of TB. The spatial and space-time scan statistics are effective ways of describing circular disease clusters. Since, in reality, infectious diseases might form other cluster types, the effectiveness of the method may be limited under actual practice. The sophistication of the analytical methodology, however, is a topic for future study. 48 refs., 3 figs., 3 tabs.

Geographic prediction of tuberculosis clusters in Fukuoka, Japan, using the space-time scan statistic

Directory of Open Access Journals (Sweden)

Onozuka Daisuke

2007-04-01

Full Text Available Abstract Background Tuberculosis (TB has reemerged as a global public health epidemic in recent years. Although evaluating local disease clusters leads to effective prevention and control of TB, there are few, if any, spatiotemporal comparisons for epidemic diseases. Methods TB cases among residents in Fukuoka Prefecture between 1999 and 2004 (n = 9,119 were geocoded at the census tract level (n = 109 based on residence at the time of diagnosis. The spatial and space-time scan statistics were then used to identify clusters of census tracts with elevated proportions of TB cases. Results In the purely spatial analyses, the most likely clusters were in the Chikuho coal mining area (in 1999, 2002, 2003, 2004, the Kita-Kyushu industrial area (in 2000, and the Fukuoka urban area (in 2001. In the space-time analysis, the most likely cluster was the Kita-Kyushu industrial area (in 2000. The north part of Fukuoka Prefecture was the most likely to have a cluster with a significantly high occurrence of TB. Conclusion The spatial and space-time scan statistics are effective ways of describing circular disease clusters. Since, in reality, infectious diseases might form other cluster types, the effectiveness of the method may be limited under actual practice. The sophistication of the analytical methodology, however, is a topic for future study.

Composites Materials and Manufacturing Technologies for Space Applications

Science.gov (United States)

Vickers, J. H.; Tate, L. C.; Gaddis, S. W.; Neal, R. E.

2016-01-01

Composite materials offer significant advantages in space applications. Weight reduction is imperative for deep space systems. However, the pathway to deployment of composites alternatives is problematic. Improvements in the materials and processes are needed, and extensive testing is required to validate the performance, qualify the materials and processes, and certify components. Addressing these challenges could lead to the confident adoption of composites in space applications and provide spin-off technical capabilities for the aerospace and other industries. To address the issues associated with composites applications in space systems, NASA sponsored a Technical Interchange Meeting (TIM) entitled, "Composites Materials and Manufacturing Technologies for Space Applications," the proceedings of which are summarized in this Conference Publication. The NASA Space Technology Mission Directorate and the Game Changing Program chartered the meeting. The meeting was hosted by the National Center for Advanced Manufacturing (NCAM)-a public/private partnership between NASA, the State of Louisiana, Louisiana State University, industry, and academia, in association with the American Composites Manufacturers Association. The Louisiana Center for Manufacturing Sciences served as the coordinator for the TIM.

Global Trends in Space Access and Utilization

Science.gov (United States)

Rahman, Shamim A.; Keim, Nicholas S.; Zeender, Peter E.

2010-01-01

global interdependent effort with all its likely complexities is an increasingly viable and pragmatic option. The discussion includes a breakdown of space missions into those of civil (scientific), military, and strictly commercial nature. It concludes that all three are robust components of a globally diversified portfolio of activities relying, essentially, on a common space industrial base and space infrastructure. As in other industries, the distribution of space industry assets and knowledge across countries and continents enables a diverse suite of options and arrangements, particularly in the areas of civil and commercial space utilization. A survey of several ongoing bilateral and multilateral space collaboration examples are provided to augment the observations regarding multinational work in space.

SpaceX's Dragon America's next generation spacecraft

CERN Document Server

Seedhouse, Erik

2016-01-01

This book describes Dragon V2, a futuristic vehicle that not only provides a means for NASA to transport its astronauts to the orbiting outpost but also advances SpaceX’s core objective of reusability. A direct descendant of Dragon, Dragon V2 can be retrieved, refurbished and re-launched. It is a spacecraft with the potential to completely revolutionize the economics of an industry where equipment costing hundreds of millions of dollars is routinely discarded after a single use. It was presented by SpaceX CEO Elon Musk in May 2014 as the spaceship that will carry NASA astronauts to the International Space Station as soon as 2016 SpaceX’s Dragon – America’s Next Generation Spacecraft describes the extraordinary feats of engineering and human achievement that have placed this revolutionary spacecraft at the forefront of the launch industry and positioned it as the precursor for ultimately transporting humans to Mars. It describes the design and development of Dragon, provides mission highlights of the f...

Complejo industrial en Ballymena, Irlanda del Norte

Directory of Open Access Journals (Sweden)

Gibb, Alexander

1966-06-01

Full Text Available These two industrial buildings serve for the manufacture of cigarettes. The main nave is 274 m long and 32 m wide. There are additional secondary buildings, which house the services and offices. This type of industry requires a close control of temperature and humidity, and it is necessary that these factors remain very constant during the process of manufacture. The naves have been covered with shed type sheeting. These sheets are prefabricated and rest on hollow arches, which are manufactured in sections, and are then prestressed and suitably spaced. The inner hollow part of these arches, and the columns on which they rest, also serve to carry the air conditioning conduits, and lighting cables. The large number of skylights ensures a good daylight illumination.Estas dos naves industriales se destinan a la fabricación de cigarrillos. La principal tiene 374 m de longitud y 32 m de anchura, completando el conjunto una serie de edificios para servicios y administración. Este tipo de industrias requiere que se preste especial atención a la temperatura y humedad del ambiente interior, lo cual exige asegurar la continuidad del estado previsto durante la fabricación. Las naves se han cubierto con una serie de láminas tipo shed, prefabricadas, que se apoyan en arcos huecos, prefabricados por trozos, pretensados y convenientemente espaciados. La parte hueca interior de estos arcos y de los montantes que los soportan se han aprovechado para colocar en ellos los conductos de aire acondicionado y otras canalizaciones para el alumbrado artificial. La gran profusión de lucernarios asegura una buena iluminación natural diurna.

Los espacios compartidos ("Shared Space"

Directory of Open Access Journals (Sweden)

Mateus Porto Schettino

2008-07-01

The "Shared Space" concept was formally defined when the European Project with this title took place, as part of the Interreg IIIB, North Sea Program. "Shared Space" initiated at 2004 and it's time as a project partly financed by the European Union finish at 2008, after having promoted seven "pilot projects" at Germany, Belgium, Denmark, Holland and England. Nevertheless, Shared Space, it's just a new name for a technique with decades of history, developed fundamentally in Holland and which implemented new criteria for traffic regulation and public space design, were based on all traffic signs elimination and on the spatial integration of all different street users. To analyze Shared Space's projects construction and operation experience, and evaluate their possible application in some Spanish city centres is this paper main objective.

Biotechnology opportunities on Space Station

Science.gov (United States)

Deming, Jess; Henderson, Keith; Phillips, Robert W.; Dickey, Bernistine; Grounds, Phyllis

1987-01-01

Biotechnology applications which could be implemented on the Space Station are examined. The advances possible in biotechnology due to the favorable microgravity environment are discussed. The objectives of the Space Station Life Sciences Program are: (1) the study of human diseases, (2) biopolymer processing, and (3) the development of cryoprocessing and cryopreservation methods. The use of the microgravity environment for crystal growth, cell culturing, and the separation of biological materials is considered. The proposed Space Station research could provide benefits to the fields of medicine, pharmaceuticals, genetics, agriculture, and industrial waste management.

Space program management methods and tools

CERN Document Server

Spagnulo, Marcello; Balduccini, Mauro; Nasini, Federico

2013-01-01

Beginning with the basic elements that differentiate space programs from other management challenges, Space Program Management explains through theory and example of real programs from around the world, the philosophical and technical tools needed to successfully manage large, technically complex space programs both in the government and commercial environment. Chapters address both systems and configuration management, the management of risk, estimation, measurement and control of both funding and the program schedule, and the structure of the aerospace industry worldwide.

Space Age Training

Science.gov (United States)

1996-01-01

Teledyne Brown developed a computer-based interactive multimedia training system for use with the Crystal Growth Furnace in the U.S. Microgravity Laboratory-2 mission on the Space Shuttle. Teledyne Brown commercialized the system and customized it for PPG Industries Aircraft Products. The system challenges learners with role-playing scenarios and software-driven simulations engaging all the senses using text, video, animation, voice, sounds and music. The transfer of this technology to commercial industrial process training has resulted in significant improvements in effectiveness, standardization, and quality control, as well as cost reductions over the usual classroom and on-the- job training approaches.

Space Biotech: Hindsight, Insight, Foresight

Science.gov (United States)

Harper, Lynn

2015-01-01

Over the past forty years, microgravity has inspired and enabled applications in a wide range of sectors including medicine, materials, computers, communications, and national defense. Trends show that demand for high-tech solutions is increasing in these sectors, solutions that require higher resolution, greater precision, novel materials, innovative processes, and more sophisticated tools. These are areas where microgravity can offer unique capabilities for innovation. The Emerging Space Office (ESO) has engaged in multiple studies over the past year that have found that microgravity RD is one of the most promising technology areas for contributing to economic growth and to NASAs mission. The focus of these studies was on terrestrial markets rather than NASA applications, applied research rather than basic research, and commercial rather than academic investigators. There have been more success stories than are generally appreciated and there are significant areas of promising future potential. Many of the problems that have limited commercial microgravity development in the past are being solved. Microgravity research and development (RD) requires iteration and learning, as rapidly as possible. New technologies enable high throughput and rapid data collection in increasingly small payloads. The International Space Station is in orbit and provides a laboratory that is available 247 at least until 2024. Frequent flights by commercial space providers to and from the ISS now enable the fast learning cycles needed by high-tech industries. Launch costs are decreasing and the ability to return payloads to Earth is increasing. New commercial space laboratories, such as those being developed by SpaceX and Bigelow Aerospace, are in the final stages of development and testing. This ecosystem for microgravity RD has never been available before. These are game-changer conditions for attracting high-tech industries to space for terrestrial, as well as NASA, applications

Cold recovery during regasification of LNG part two: Applications in an Agro Food Industry and a Hypermarket

International Nuclear Information System (INIS)

La Rocca, Vincenzo

2011-01-01

The paper deals with the cold energy available during LNG regasification, which can be recovered and utilized both inside the LNG regasification area and at a distance, such as in deep freezing agro food industry facilities and for space conditioning in the commercial and residential sector (e.g. Supermarkets and Hypermarkets). The feasibility study of this kind of application has been carried out at DREAM, Palermo University, within the framework of a research program. The results of a feasibility study of the kind of venture proposed, starting from its conceptual design and with a thorough thermodynamic and economic analysis, demonstrated the suitability and the profitability of the applications proposed. They seem very attractive due to expected wide future exploitation of LNG regasification in the World. -- Highlights: → Proposal pertaining cold recovery during LNG regasification. → Cold utilization far from the regasification site. → Transfer of liquid/gaseous carbon dioxide pipeline. → Exergetic and economic analysis of venture pertaining applications proposed. → Results of venture economic analysis.

The role of space in the security and defence policy of Turkey. A change in outlook: Security in space versus security from space

OpenAIRE

Ercan, C.; Kale, I.

2017-01-01

Space and security domains are strongly related with each other. Nowadays, space is an indispensable part of security and defence policy, and it is increasingly becoming a critical infrastructure for strategic Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) systems. However, space is vulnerable itself to the new space threats. This study reviews the current and near future space role in Turkey's security and defence policy and aims to address...

Nuclear power industry

International Nuclear Information System (INIS)

1999-01-01

This press dossier presented in Shanghai (China) in April 1999, describes first the activities of the Framatome group in the people's republic of China with a short presentation of the Daya Bay power plant and of the future Ling Ao project, and with a description of the technological cooperation with China in the nuclear domain (technology transfers, nuclear fuels) and in other industrial domains (mechanics, oil and gas, connectors, food and agriculture, paper industry etc..). The general activities of the Framatome group in the domain of energy (nuclear realizations in France, EPR project, export activities, nuclear services, nuclear fuels, nuclear equipments, industrial equipments) and of connectors engineering are presented in a second and third part with the 1998 performances. (J.S.)

Industrial Applications of Image Processing

Science.gov (United States)

Ciora, Radu Adrian; Simion, Carmen Mihaela

2014-11-01

The recent advances in sensors quality and processing power provide us with excellent tools for designing more complex image processing and pattern recognition tasks. In this paper we review the existing applications of image processing and pattern recognition in industrial engineering. First we define the role of vision in an industrial. Then a dissemination of some image processing techniques, feature extraction, object recognition and industrial robotic guidance is presented. Moreover, examples of implementations of such techniques in industry are presented. Such implementations include automated visual inspection, process control, part identification, robots control. Finally, we present some conclusions regarding the investigated topics and directions for future investigation

The manifold model for space-time

International Nuclear Information System (INIS)

Heller, M.

1981-01-01

Physical processes happen on a space-time arena. It turns out that all contemporary macroscopic physical theories presuppose a common mathematical model for this arena, the so-called manifold model of space-time. The first part of study is an heuristic introduction to the concept of a smooth manifold, starting with the intuitively more clear concepts of a curve and a surface in the Euclidean space. In the second part the definitions of the Csub(infinity) manifold and of certain structures, which arise in a natural way from the manifold concept, are given. The role of the enveloping Euclidean space (i.e. of the Euclidean space appearing in the manifold definition) in these definitions is stressed. The Euclidean character of the enveloping space induces to the manifold local Euclidean (topological and differential) properties. A suggestion is made that replacing the enveloping Euclidean space by a discrete non-Euclidean space would be a correct way towards the quantization of space-time. (author)

The economics of Australia's oil and gas industry

International Nuclear Information System (INIS)

McDonald, Rob

1994-01-01

This article evaluates the performance of the Australian oil and gas industry, focusing on the listed companies. A large part of the Australian oil and gas industry-(as much as 60 per cent)-is held by unlisted companies or by major international groups not listed in Australia. Nevertheless, it was considered that the sample of companies reviewed gives a reasonable guide to overall industry performance. Also, as part of this relative analysis, the Australian oil and gas industry will be compared to other investments that shareholders could have enjoyed. As well, its performance will be compared with the much larger industry in the United States. It is shown that over the past 10 to 20 years, the rate of return that the Australian oil and gas industry has offered to providers of equity capital has been less than industry expectations. While it was a better performer than the smaller US companies, it lagged substantially behind the major three sectors of the US index, which are international integrated gas distribution and domestic. 10 figs

The Aalborg Survey / Part 3 - Interview Based Survey

DEFF Research Database (Denmark)

Harder, Henrik; Christensen, Cecilie Breinholm; Jensen, Maria Vestergaard

Background and purpose The Aalborg Survey consists of four independent parts: a web, GPS and an interview based survey and a literature study, which together form a consistent investigation and research into use of urban space, and specifically into young people’s use of urban space: what young...... people do in urban spaces, where they are in the urban spaces and when the young people are in the urban spaces. The answers to these questions form the framework and enable further academic discussions and conclusions in relation to the overall research project Diverse Urban Spaces (DUS). The primary......) and the research focus within the cluster of Mobility and Tracking Technologies (MoTT), AAU. Summary / Part 3 - Interview Based Survey The 3rd part of the DUS research project has been carried out during the fall of 2009 and the summer and fall of 2010 as an interview based survey of 18 selected participants (nine...

Developing hybrid near-space technologies for affordable access to suborbital space

Science.gov (United States)

Badders, Brian David

High power rockets and high altitude balloons are two near-space technologies that could be combined in order to provide access to the mesosphere and, eventually, suborbital space. This "rockoon" technology has been used by several large budget space programs before being abandoned in favor of even more expensive, albeit more accurate, ground launch systems. With the increased development of nano-satellites and atmospheric sensors, combined with rising interest in global atmospheric data, there is an increase in desire for affordable access to extreme altitudes that does not necessarily require the precision of ground launches. Development of hybrid near-space technologies for access to over 200k ft. on a small budget brings many challenges within engineering, systems integration, cost analysis, market analysis, and business planning. This research includes the design and simulation testing of all the systems needed for a safe and reusable launch system, the cost analysis for initial production, the development of a business plan, and the development of a marketing plan. This project has both engineering and scientific significance in that it can prove the space readiness of new technologies, raise their technology readiness levels (TRLs), expedite the development process, and also provide new data to the scientific community. It also has the ability to stimulate university involvement in the aerospace industry and help to inspire the next generation of workers in the space sector. Previous development of high altitude balloon/high power rocket hybrid systems have been undertaken by government funded military programs or large aerospace corporations with varying degrees of success. However, there has yet to be a successful flight with this type of system which provides access to the upper mesosphere in a university setting. This project will aim to design and analyze a viable system while testing the engineering process under challenging budgetary constraints. The

Management of logistics chains of industrial enterprises in high-tech industries

Directory of Open Access Journals (Sweden)

Demchenko Alexander

2017-01-01

Full Text Available The article analyses the trends of high-tech industries development in the market globalization conditions. The economic growth of high-tech industries largely depends on technological innovations, products and equipment based on usage of the results of applied and fundamental scientific researches. It is shown that characteristics of high-tech productions influence the logistics chain structure. It justifies the importance to include partnering enterprises taking part in creation of intellectual and tangible assets in the logistic chain of the industrial enterprise. It is noted that development of production technologies contributes to formation of innovative logistic chains, which participants are enterprises cooperating for achievement of competitive power. The article offers a model of an industry logistic chain comprising the conventional logistic chain and innovative logistic chains corresponding to the industry market segments. It is proposed to use the customer value of the manufactured products as a criterion of the industrial enterprise’s logistic chains management efficiency. Implementation of the offered model of cooperation between the logistic chain participants is aimed at creation of a continuous innovations flow, reduction of technological development costs and uniting of the participants’ experience.

An assembly system based on industrial robot with binocular stereo vision

Science.gov (United States)

Tang, Hong; Xiao, Nanfeng

2017-01-01

This paper proposes an electronic part and component assembly system based on an industrial robot with binocular stereo vision. Firstly, binocular stereo vision with a visual attention mechanism model is used to get quickly the image regions which contain the electronic parts and components. Secondly, a deep neural network is adopted to recognize the features of the electronic parts and components. Thirdly, in order to control the end-effector of the industrial robot to grasp the electronic parts and components, a genetic algorithm (GA) is proposed to compute the transition matrix and the inverse kinematics of the industrial robot (end-effector), which plays a key role in bridging the binocular stereo vision and the industrial robot. Finally, the proposed assembly system is tested in LED component assembly experiments, and the results denote that it has high efficiency and good applicability.

Self-Adjointness Criterion for Operators in Fock Spaces

International Nuclear Information System (INIS)

Falconi, Marco

2015-01-01

In this paper we provide a criterion of essential self-adjointness for operators in the tensor product of a separable Hilbert space and a Fock space. The class of operators we consider may contain a self-adjoint part, a part that preserves the number of Fock space particles and a non-diagonal part that is at most quadratic with respect to the creation and annihilation operators. The hypotheses of the criterion are satisfied in several interesting applications

Industrial Physics---Southern California Style

Science.gov (United States)

Leslie, Stuart

2013-03-01

Only in Southern California did space-age style really come into its own as a unique expression of Cold War scientific culture. The corporate campuses of General Atomic in San Diego and North American Aviation in Los Angeles perfectly expressed the exhilarating spirit of Southern California's aerospace era, scaling up the residential version of California modernism to industrial proportion. Architects William Pereira and A.C. Martin Jr., in collaboration with their scientific counterparts, fashioned military-industrial `dream factories' for industrial physics that embodied the secret side of the space-age zeitgeist, one the public could only glimpse of in photographs, advertisements, and carefully staged open houses. These laboratories served up archetypes of the California dream for a select audience of scientists, engineers, and military officers, live-action commercials for a lifestyle intended to lure the best and brightest to Southern California. Paradoxically, they hid in plain sight, in the midst of aerospace suburbs, an open secret, at once visible and opaque, the public face of an otherwise invisible empire. Now, at the end of the aerospace era, these places have become an endangered species, difficult to repurpose, on valuable if sometimes highly polluted land. Yet they offer an important reminder of a more confident time when many physicists set their sights on the stars.

Improving Compressed Air System Performance: A Sourcebook for Industry

Energy Technology Data Exchange (ETDEWEB)

2003-11-01

NREL will produce this sourcebook for DOE's Industrial Technologies Office as part of a series of documents on industrial energy equipment. The sourcebook is a reference for industrial compressed air system users, outlining opportunities to improve system efficiency.

Application of space benefits to education

Science.gov (United States)

Dannenberg, K. K.; Ordway, F. I., III

1972-01-01

Information on the conducting of a teacher workshop is presented. This educational pilot project updated instruction material, used improved teaching techniques, and increased student motivation. The NASA/MSFC industrial facilities, and the displays at the Alabama Space and Rocket Center (ASRC) were key elements of the program, including a permanent exhibit, at the latter, on selected benefits accruing from the space program.

The international handbook of space technology

CERN Document Server

Badescu, Viorel

2014-01-01

This comprehensive handbook provides an overview of space technology and a holistic understanding of the system-of-systems that is a modern spacecraft. With a foreword by Elon Musk, CEO and CTO of SpaceX, and contributions from globally leading agency experts from NASA, ESA, JAXA, and CNES, as well as European and North American academics and industrialists, this handbook, as well as giving an interdisciplinary overview, offers, through individual self-contained chapters, more detailed understanding of specific fields, ranging through: ·         Launch systems, structures, power, thermal, communications, propulsion, and software, to ·         entry, descent and landing, ground segment, robotics, and data systems, to ·         technology management, legal and regulatory issues, and project management. This handbook is an equally invaluable asset to those on a career path towards the space industry as it is to those already within the industry.

Supply of the Industrial Products in Romania. A Territorial Approach

Directory of Open Access Journals (Sweden)

Adriana Grigorescu

2008-03-01

Full Text Available The industrial products and services supply was analyzed in the present paper through the statistical indicators of the industrial production, applied for Romania (2005, both at macroeconomic and regional level (on development regions. The first part of the paper presents some of the methodological reglamentations used in determining the “industrial production” statistical indicator, according to the European Union statistical practices (Pack, 2000; *** ìMethodology of short-term business statisticsî, 2006; Peneder, 2001. In the second part of the paper, the authors analyze the main industrial policy previsions in Romania in order to accelerate the process of resource allocation among and within the various sectors, to improve the competitiveness, to attenuate the discrepancies between the economic development level of Romanian regions and to become part of a common European industrial policy. Regional analysis is a domain largely studied by Kangas, Leskinen, Kangas, 2007; Leskinen, Kangas, 2005; Rondinelli, 1996; Banai-Kashani, Reza, 1989.  

The Space House TM : Space Technologies in Architectural Design

Science.gov (United States)

Gampe, F.; Raitt, D.

2002-01-01

The word "space" has always been associated with and had a profound impact upon architectural design. Until relatively recently, however, the term has been used in a different sense to that understood by the aerospace community - for them, space was less abstract, more concrete and used in the context of space flight and space exploration, rather than, say, an empty area or space requiring to be filled by furniture. However, the two senses of the word space have now converged to some extent. Interior designers and architects have been involved in designing the interior of Skylab, the structure of the International Space Station, and futuristic space hotels. Today, architects are designing, and builders are building, houses, offices and other structures which incorporate a plethora of new technologies, materials and production processes in an effort not only to introduce innovative and adventurous ideas but also in an attempt to address environmental and social issues. Foremost among these new technologies and materials being considered today are those that have been developed for and by the space industry. This paper examines some of these space technologies, such as energy efficient solar cells, durable plastics, air and water filtration techniques, which have been adapted to both provide power while reducing energy consumption, conserve resources and so on. Several of these technologies have now been employed by the European Space Agency to develop a Space House TM - the first of its kind, which will be deployed not so much on planets like Mars, but rather here on Earth. The Space House TM, which exhibits many innovative features such as high strength light-weight carbon composites, active noise-damped, (glass and plastic) windows, low-cost solar arrays and latent heat storage, air and water purification systems will be described.

Cinema and Geography: Geographic Space, Landscape and Territory in the Film Industry

OpenAIRE

Gámir Orueta, Agustín; Manuel Valdés, Carlos

2009-01-01

This document is a direct translation of the original article in Spanish, published in the 'Boletín de la Asociación de Geógrafos Españoles', 2007, nº 45 pp. 157 - 190. This work presents a theoretical and analytical approach to the relationship between cinema and geographic space. First, special cinematographic qualities are differentiated from those of other means of geographic representation, at the same time identifying the differences between real space and film space. Subsequently, t...

STUDY ON THE USAGE OF SPECIAL MATERIALS FOR HIGH-STRENGTH PARTS USED IN THE MACHINES MANUFACTURING INDUSTRY

Directory of Open Access Journals (Sweden)

BIBU Marius

2016-09-01

Full Text Available Whereas formerly metallic materials were used extensively and for various purposes in the machines manufacturing industry, nowadays new materials are sought that can replace the "conventional" machines manufacturing materials with new ones. This is especially challenging in areas where parts need to be able to withstand very tough conditions, such as high temperatures or large forces applied to them. The current paper intends to analyze some of the most widely used materials for high-strength applications. A special focus in this regard is on the one hand in fiber-reinforced composite materials with the polymer matrix and on the other hand on basalt. The most important properties, processing technologies and applications of these materials are analyzed and discussed and conclusions are drawn regarding their compatibility with the intended purpose.

Kent in space: Cosmic dust to space debris

Science.gov (United States)

McDonnell, J. A. M.

1994-10-01

The dusty heritage of the University of Kent's Space Group commenced at Jodrell Bank, Cheshire, U.K., the home of the largest steerable radio telescope. While Professor Bernard Lovell's 250 ft. diameter telescope was used to command the U.S. deep space Pioneer spacecraft, Professor Tony McDonnell, as a research student in 1960, was developing a space dust detector for the US-UK Ariel program. It was successful. With a Ph.D. safely under the belt, it seemed an inevitable step to go for the next higher degree, a B.T.A.] Two years with NASA at Goddard Space Flight Center, Greenbelt, provided excellent qualifications for such a graduation ('Been to America'). A spirited return to the University of Kent at Canterbury followed, to one of the green field UK University sites springing from the Robbins Report on Higher Education. Swimming against the current of the brain drain, and taking a very considerable reduction in salary, it was with some disappointment that he found that the UK Premier Harold Wilson's 'white-hot technological revolution' never quite seemed to materialize in terms of research funding] Research expertise, centered initially on cosmic dust, enlarged to encompass planetology during the Apollo program, and rightly acquired international acclaim, notching up a history of space missions over 25 years. The group now comprises 38 people supported by four sources: the government's Research Councils, the University, the Space Agencies and Industry. This paper describes the thrust of the group's Research Plan in Space Science and Planetology; not so much based on existing international space missions, but more helping to shape the direction and selection of space missions ahead.

Multiple part feeding

DEFF Research Database (Denmark)

Hvilshøj, Mads; Bøgh, Simon; Nielsen, Oluf Skov

2012-01-01

" is capable of successfully servicing four part feeders in three production cells using command signals from an Open Process Control (OPC) server. Furthermore, the paper presents future research and development suggestions for AIMM, which contributes to near-term industrial maturation and implementation...

Giving Birth to the James Webb Space Telescope: Part 1

Science.gov (United States)

Mather, John

2013-01-01

In late October 1995, I found a remarkable message on my answering machine from Ed Weiler, then the Program Scientist for the Hubble Space Telescope. Would I work on the next generation space telescope, the successor to the beautiful HST? It took me mere moments to work out the answer: Of course! At the time, my work on the COsmic Background Explorer (COBE) was finished, I was writing a book about it (The Very First Light, with John Boslough), and I thought NASA might never do anything nearly as spectacular again. Wow, was I happy to be surprised by that call!

Deployable solar energy generators for deep space cubesats, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Cubesats require highly compact technologies to maximize their effectiveness. As cubesats are expected to be low-cost and, relative to the space industry, mass...

Space Radiation Dosimetry

International Nuclear Information System (INIS)

Deme, S.

2003-01-01

Although partly protected from galactic and solar cosmic radiation by the Earth's magnetosphere in Low Earth Orbit (LEO) astronauts exposure levels during long-term missions (90 days to 180 days) by far exceed with exposures of up to more than 100 mSv the annual exposure limits set for workers in the nuclear industry, but are still below the yearly exposure limits of 500 mSv for NASA astronauts. During solar particle events the short-term limits (300 mSv) may be approached or even exceeded. In the interplanetary space, outside the Earth's magnetic field even relatively benign Solar Particle Events (SPEs) can produce 1 Sv skin-absorbed doses. Although new rocket technologies could reduce astronauts' total exposure to space radiation during a human Mars mission, the time required for the mission, which is now in the order of years. Therefore mission planners will need to consider a variety of countermeasures for the crew members including physical protection (e.g. shelters), active protection (e.g. magnetic protection), pharmacological protection, local protection (extra protection for critical areas of the body) etc. With full knowledge of these facts, accurate personal dose measurement will become increasingly important during human missions to Mars. The new dose limits for radiation workers correspond to excess lifetime risk of 3% (NCRP) and 4% (ICRP). While astronauts accept the whole variety of flight risks they are taking in mission, there is concern about risks that may occur later in life. A risk no greater than the risk of radiation workers would be acceptable. (author)

Vision 2040: Evolving the Successful International Space University

Science.gov (United States)

Martin, Gary; Marti, Izan Peris; Tlustos, Reinhard; Lorente, Arnau Pons; Panerati, Jocopo; Mensink, Wendy; Sorkhabi, Elbruz; Garcia, Oriol Gasquez; Musilova, Michaela; Pearson, Thomas

2015-01-01

Space exploration has always been full of inspiration, innovation, and creativity, with the promise of expanding human civilization beyond Earth. The space sector is currently experiencing rapid change as disruptive technologies, grassroots programs, and new commercial initiatives have reshaped long-standing methods of operation. Throughout the last 28 years, the International Space University (ISU) has been a leading institution for space education, forming international partnerships, and encouraging entrepreneurship in its over 4,000 alumni. In this report, our Vision 2040 team projected the next 25 years of space exploration and analyzed how ISU could remain a leading institution in the rapidly changing industry. Vision 2040 considered five important future scenarios for the space sector: real-time Earth applications, orbital stations, lunar bases, lunar and asteroid mining, and a human presence on Mars. We identified the signals of disruptive change within these scenarios, including underlying driving forces and potential challenges, and derived a set of skills that will be required in the future space industry. Using these skills as a starting point, we proposed strategies in five areas of focus for ISU: the future of the Space Studies Program (SSP), analog missions, outreach, alumni, and startups. We concluded that ISU could become not just an increasingly innovative educational institution, but one that acts as an international organization that drives space commercialization, exploration, innovation, and cooperation.

Europe at the crossroads: The future of its satellite communications industry

Science.gov (United States)

Bartholome, Pierre; Battrick, B.

1993-11-01

Ways of adapting the European Space Agency's role to the new industrial environment of satellite communications, which is characterized by the disappearance of traditional monopolies and the introduction of competition, are presented. As far as ESA is concerned, it is found that a general consensus exists to recommend that the agency should take a much wider view of its role as a research and development (R&D) organization. It should no longer restrict its field of activity to space technology only, but should take a more global approach. More emphasis should be placed on the development of complete communications systems and of commercial applications. European industry indeed feels very strongly that it is not getting from ESA the support it needs to match the performance of its foreign competitors on the world markets. It can only succeed commercially in the fierce competition with the U.S. and Japan if a substantial R&D program is defined and funded at European level, as required by the magnitude of the financial effort necessary. It is concluded that anything the agency untertakes in the future to redress the situation would produce much greater dividends if it were part of a coherent plan where all the European partners play their role in a cooperative spirit. It is recommended that the European Commission should, as a matter of urgency, take steps to institute a concertation mechanism involving all major players with a view to defining and developing a coherent strategy for Europe.

Institutionalization of Markets and Issues of the Growth of Industrial Enterprises

Directory of Open Access Journals (Sweden)

Zamazii Oksana V.

2015-09-01

Full Text Available The article developes and proves a scientific hypothesis that strengthening the integration processes in the market space causes its institutionalization, and thus leads to the issues of proliferation of the free market players as a result of a division of spheres of influence between the major financial-industrial groups and corporations. It has been proved that a clear hierarchical structure, along with rigid subordination of free economic agents to the chief processor of resources within the growing corporations are those preconditions, which gradually form characteristics of an organization or an institution in terms of markets. An author's own definition of the notion of «institutional market» has been proposed, which is different from the classic formulation. It is emphasized that institutionalization of market space turns the latter into an another economic system, the main characteristics of which are: limited number of buyers and sellers; presence of conglomerates with rigid hierarchical relationships between buyers and sellers; etc. Enlargement and diversification of business as well as growth of its influence not only within its own industry sector, but also in the related sectors, leads to the fact that corporations are trying to control markets (supply and demand which meantime are turning into rigid management structures, acquiring characteristics of institutions (organizations. This hinders the market entry of new market players, increases risks of business and requires on the part of enterprises new marketing techniques for positioning the own ability to create customer value.

Foundations of symmetric spaces of measurable functions Lorentz, Marcinkiewicz and Orlicz spaces

CERN Document Server

Rubshtein, Ben-Zion A; Muratov, Mustafa A; Pashkova, Yulia S

2016-01-01

Key definitions and results in symmetric spaces, particularly Lp, Lorentz, Marcinkiewicz and Orlicz spaces are emphasized in this textbook. A comprehensive overview of the Lorentz, Marcinkiewicz and Orlicz spaces is presented based on concepts and results of symmetric spaces. Scientists and researchers will find the application of linear operators, ergodic theory, harmonic analysis and mathematical physics noteworthy and useful. This book is intended for graduate students and researchers in mathematics and may be used as a general reference for the theory of functions, measure theory, and functional analysis. This self-contained text is presented in four parts totaling seventeen chapters to correspond with a one-semester lecture course. Each of the four parts begins with an overview and is subsequently divided into chapters, each of which concludes with exercises and notes. A chapter called “Complements” is included at the end of the text as supplementary material to assist students with independent work.

Fibre optic gyroscopes for space use

Science.gov (United States)

Faussot, Nicolas; Cottreau, Yann; Hardy, Guillaume; Simonpietri, Pascal; Gaiffe, Thierry

2017-11-01

Among the technologies available for gyroscopes usable in space, the Fibre Optic Gyroscope (FOG) technology appears to be the most suitable: no moving parts, very good lifetime, low power consumption, very low random walk, arbitrarily low angular resolution and very good behaviour in radiations and vacuum. Benefiting from more than ten years of experience with this technology, Ixsea (formerly the Navigation Division of Photonetics) is developing space FOG under both CNES and ESA contracts since many years. In the 1996-1998 period, two space FOG demonstrators in the 0,01°/h class were manufactured, including an optical head (optic and optoelectronic part) designed for space use and a standard ground electronics. Beyond the demonstration of the specified FOG performances, the behaviour of the optical head has been validated for use in typical space environment: vibrations, shocks, radiations (up to 50 krad) and thermal vacuum. Since the beginning of 1999, Ixsea is developing a space electronics in order to manufacture two complete space FOG. The first one entered in qualification in October. The second one will be delivered beginning of next year, it will be used in a CNES attitude measurement experiment (MAGI) onboard the FrenchBrazilian Microsatellite (FBM) partly dedicated to technology evaluation.

Using a source-receptor approach to characterise VOC behaviour in a French urban area influenced by industrial emissions. Part II: source contribution assessment using the Chemical Mass Balance (CMB) model.

Science.gov (United States)

Badol, Caroline; Locoge, Nadine; Galloo, Jean-Claude

2008-01-25

In Part I of this study (Badol C, Locoge N, Leonardis T, Gallo JC. Using a source-receptor approach to characterise VOC behaviour in a French urban area influenced by industrial emissions, Part I: Study area description, data set acquisition and qualitative data analysis of the data set. Sci Total Environ 2007; submitted as companion manuscript.) the study area, acquisition of the one-year data set and qualitative analysis of the data set have been described. In Part II a source profile has been established for each activity present in the study area: 6 profiles (urban heating, solvent use, natural gas leakage, biogenic emissions, gasoline evaporation and vehicle exhaust) have been extracted from literature to characterise urban sources, 7 industrial profiles have been established via canister sampling around industrial plants (hydrocarbon cracking, oil refinery, hydrocarbon storage, lubricant storage, lubricant refinery, surface treatment and metallurgy). The CMB model is briefly described and its implementation is discussed through the selection of source profiles and fitting species. Main results of CMB modellings for the Dunkerque area are presented. (1) The daily evolution of source contributions for the urban wind sector shows that the vehicle exhaust source contribution varies between 40 and 55% and its relative increase at traffic rush hours is hardly perceptible. (2) The relative contribution of vehicle exhaust varies from 55% in winter down to 30% in summer. This decrease is due to the increase of the relative contribution of hydrocarbon storage source reaching up to 20% in summer. (3) The evolution of source contributions with wind directions has confirmed that in urban wind sectors the contribution of vehicle exhaust dominate with around 45-55%. For the other wind sectors that include some industrial plants, the contribution of industrial sources is around 60% and could reach 80% for the sector 280-310 degrees , which corresponds to the most dense

Space station systems analysis study. Part 2, Volume 2. [technical report

Science.gov (United States)

1977-01-01

Specific system options are defined and identified for a cost effective space station capable of orderly growth with regard to both function and orbit location. Selected program options are analyzed and configuration concepts are developed to meet objectives for the satellite power system, earth servicing, space processing, and supporting activities. Transportation systems are analyzed for both LEO and GEO orbits.

Total Productivity Management in Small Industries

OpenAIRE

FARAJPOUR-KHANAPOSHTANI, Ghassem; HAYATI, Seyyed Iman

2015-01-01

Abstract. The importance of small businesses and SME's has been well established in the literature of the world economy. Thus, both industrialized and developing countries, development, support of small businesses as part and parcel of their productivity strategies have. Small industries are a major driver of employment, economic growth and productivity. About 80% of all companies in the world are less than 10 cases of human resources, so 95% of industries in the UK, Spain and Finland and 94 ...

Waste audit pada industri penyamakan kulit

Directory of Open Access Journals (Sweden)

Prayitno Prayitno

1999-07-01

Full Text Available Waste audit is new environmental activities. to the Indonesia public and the large part of industrial community it is one of the environmental audit activities. Waste audit aims to identify whether the waste that by the industry waste so that metods for minimizing the waste can be found. In the leather tanning industry wasted audit is performend for every step pg the process, started from the raw material strage to the fishing ptocess.

Surgical anatomy of the retroperitoneal spaces--part I: embryogenesis and anatomy.

Science.gov (United States)

Mirilas, Petros; Skandalakis, John E

2009-11-01

Embryologically, the retroperitoneal (extraperitoneal) connective tissue includes three strata, which respectively form the internal fascia lining of the body wall, the renal fascia, and the covering of the gastrointestinal viscera. All organs, vessels, and nerves, that lie on the posterior abdominal wall, along with their tissues and surrounding connective and fascial planes, are collectively referred to as the retroperitoneum. The retroperitoneal space is the area of the posterior abdominal wall that is located between the parietal peritoneum and the fascia. Within the greater retroperitoneal space, there are also several small spaces, or subcompartments. Loose connective tissue and fat surround the anatomic entities, and, to a variable degree, occupy the subcompartments. The multilaminar thoracolumbar (lumbodorsal) fascia begins at the occipital area and terminates at the sacrum.

Fundamental plant biology enabled by the space shuttle.

Science.gov (United States)

Paul, Anna-Lisa; Wheeler, Ray M; Levine, Howard G; Ferl, Robert J

2013-01-01

The relationship between fundamental plant biology and space biology was especially synergistic in the era of the Space Shuttle. While all terrestrial organisms are influenced by gravity, the impact of gravity as a tropic stimulus in plants has been a topic of formal study for more than a century. And while plants were parts of early space biology payloads, it was not until the advent of the Space Shuttle that the science of plant space biology enjoyed expansion that truly enabled controlled, fundamental experiments that removed gravity from the equation. The Space Shuttle presented a science platform that provided regular science flights with dedicated plant growth hardware and crew trained in inflight plant manipulations. Part of the impetus for plant biology experiments in space was the realization that plants could be important parts of bioregenerative life support on long missions, recycling water, air, and nutrients for the human crew. However, a large part of the impetus was that the Space Shuttle enabled fundamental plant science essentially in a microgravity environment. Experiments during the Space Shuttle era produced key science insights on biological adaptation to spaceflight and especially plant growth and tropisms. In this review, we present an overview of plant science in the Space Shuttle era with an emphasis on experiments dealing with fundamental plant growth in microgravity. This review discusses general conclusions from the study of plant spaceflight biology enabled by the Space Shuttle by providing historical context and reviews of select experiments that exemplify plant space biology science.

NASA space communications R and D (Research and Development): Issues, derived benefits, and future directions

Science.gov (United States)

1989-02-01

Space communication is making immense strides since ECHO was launched in 1962. It was a simple passive reflector of signals that demonstrated the concept. Today, satellites incorporating transponders, sophisticated high-gain antennas, and stabilization systems provide voice, video, and data communications to millions of people nationally and worldwide. Applications of emerging technology, typified by NASA's Advanced Communications Technology Satellite (ACTS) to be launched in 1992, will use newer portions of the frequency spectrum (the Ka-band at 30/20 GHz), along with antennas and signal-processing that could open yet new markets and services. Government programs, directly or indirectly, are responsible for many space communications accomplishments. They are sponsored and funded in part by NASA and the U.S. Department of Defense since the early 1950s. The industry is growing rapidly and is achieving international preeminence under joint private and government sponsorship. Now, however, the U.S. space communications industry - satellite manufacturers and users, launch services providers, and communications services companies - are being forced to adapt to a different environment. International competition is growing, and terrestrial technologies such as fiber optics are claiming markets until recently dominated by satellites. At the same time, advancing technology is opening up opportunities for new applications and new markets in space exploration, for defense, and for commercial applications of several types. Space communications research, development, and applications (RD and A) programs need to adjust to these realities, be better coordinated and more efficient, and be more closely attuned to commercial markets. The programs must take advantage of RD and A results in other agencies - and in other nations.

14 CFR 380.14 - Unused space.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Unused space. 380.14 Section 380.14 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) SPECIAL REGULATIONS PUBLIC CHARTERS Conditions and Limitations § 380.14 Unused space. Noting contained in this part...

Space-Hotel Early Bird - An Educational and Public Outreach Approach

Science.gov (United States)

Amekrane, R.; Holze, C.

2002-01-01

In April 2001 the German Aerospace Society DGLR e.V. in cooperation with the Technical University of Darmstadt, Germany initiated an interdisciplinary students contest, under the patronage of Mr. Joerg Feustel-Buechl, the Director of Manned Spaceflight and Microgravity, European Space Agency (ESA), for the summer term 2001. It was directed to graduated architecture students, who had to conceive and design a space-hotel with specific technical, economical and social requirements. The to be developed Space Hotel for a low earth orbit has to accommodate 220 guests. It was of utmost importance that this contest becomes an integral part of the student's tuition and that professors of the different academic and industrial institutions supported the project idea. During the summer term 2001 about fifty students occupied themselves with the topic, "design of an innovative space-hotel". The overall challenge was to create rooms used under microgravity environment, which means to overcome existing definitions and to find a new definition of living space. Because none of the students were able to experience such a room under microgravity they were forced to use the power of their imagination capability. The students attended moreover a number of lectures on different technical subjects focusing on space and went on several space-related excursions. Having specialists, as volunteers, in the field of space in charge meant that it could be ensured that the designs reflected a certain possibility of being able to be realized. Within the summer term seventeen major designs developed from the conceptual status to high sophisticated concepts and later on also to respective models. A competition combined with a public exhibition, that took place within the Annual German Aeronautics and Astronautics Congress, and intense media relations finalized this project. The project idea of "Early Bird - Visions of a Space Hotel" which was developed within six month is a remarkable example, how

SPACE IN JAPANESE ZEN BUDDHIST ARCHITECTURE

Directory of Open Access Journals (Sweden)

Antariksa Antariksa

2001-01-01

Full Text Available The beginning in the medieval period the ideas "emptiness" and "nothingness" in Buddhist doctrine influences over the Japanese. Space in Japanese architecture (kukan, as a empty place. This word originally stood for a "hole in the ground", and in on present meaning of a "hole in the universe", or "sky". The ancient Japanese divided space vertically into two parts, sora (sky and ame or ama (heaven. In the concept of emptiness both of this above it can be said is a part of space. This paper will tries to explain and discusses about the meaning of space in Japanese Zen Buddhist architecture.

OCT for industrial applications

Science.gov (United States)

Song, Guiju; Harding, Kevin

2012-11-01

Optical coherence tomography (OCT), as an interferometric method, has been studied as a distance ranger. As a technology capable of producing high-resolution, depth-resolved images of biological tissue, OCT had been widely used for the application of ophthalmology and has been commercialized in the market today. Enlightened by the emerging research interest in biomedical domain, the applications of OCT in industrial inspection were rejuvenated by a few groups to explore its potential for characterizing new materials, imaging or inspecting industrial parts as a service solution[3]. Benefiting from novel photonics components and devices, the industrial application of the older concepts in OCT can be re-visited with respect to the unique performance and availability. Commercial OCT developers such as Michelson Diagnostics (MDL; Orpington, U.K.) and Thorlabs (Newton, NJ) are actively exploring the application of OCT to industrial applications and they have outlined meaningful path toward the metrology application in emerging industry[3]. In this chapter, we will introduce the fundamental concepts of OCT and discuss its current and potential industrial applications.

Space Weather Concerns for All-Electric Propulsion Satellites

Science.gov (United States)

Horne, Richard B.; Pitchford, David

2015-08-01

The introduction of all-electric propulsion satellites is a game changer in the quest for low-cost access to space. It also raises new questions for satellite manufacturers, operators, and the insurance industry regarding the general risks and specifically the threat of adverse space weather. The issues surrounding this new concept were discussed by research scientists and up to 30 representatives from the space industry at a special meeting at the European Space Weather Week held in November 2014. Here we report on the discussions at that meeting. We show that for a satellite undergoing electric orbit raising for 200 days the radiation dose due to electrons is equivalent to approximately 6.7 year operation at geostationary orbit or approximately half the typical design life. We also show that electrons can be injected into the slot region (8000 km) where they pose a risk of satellite internal charging. The results highlight the importance of additional radiation protection. We also discuss the benefits, the operational considerations, the other risks from the Van Allen radiation belts, the new business opportunities for space insurance, and the need for space situation awareness in medium Earth orbit where electric orbit raising takes place.

RUSSIAN INDUSTRY INVESTMENT SITUATION

Directory of Open Access Journals (Sweden)

O. V. Pochukaeva

2011-01-01

Full Text Available The actual deficiency of investment into Russian industry innovative development increases its technological drag from industries of countries with developed markets. Although the rate of investment into real sectors of Russian economics mid 2000 was higher compared to the previous period, annual investment amounts were much lower than in 1990. At present, highest investment amounts are directed to industry extractive branches and to the commerce. Amounts invested to various economy branches do not correspond to their contribution to the country’sGross Added Product; particularly underinvested are manufacturing industry branches. At present, foreign share in the country economy total investment makes 15–18%. Recently, most interesting for foreigners was investment to machine-building branches with overwhelming part (for example, 90% in 2007–2008 of foreign investment into the machine-building industry being directed to creation of new automobile plants. Today, first place in the list of foreign investors’ preferences in Russia is taken by the machine-tool construction sector.

Opportunities of Bamboo for Industrial Processes

NARCIS (Netherlands)

Janssen, J.J.A.; Erkelens, P.A.; Jonge, S. de; Vliet, A.A.M. van

2000-01-01

Bamboo as resource for industrial raw material has many opportunities: It contains a 40 percent cellulose, with a fibre length of 3 to 4 mm, more than wood. This can be used as pulp in the paper industry or as cellulose. The fibres also can be used for fibreboard or for furniture parts. Bamboo

Space time problems and applications

DEFF Research Database (Denmark)

Dethlefsen, Claus

models, cubic spline models and structural time series models. The development of state space theory has interacted with the development of other statistical disciplines.   In the first part of the Thesis, we present the theory of state space models, including Gaussian state space models, approximative...... analysis of non-Gaussian models, simulation based techniques and model diagnostics.   The second part of the Thesis considers Markov random field models. These are spatial models applicable in e.g. disease mapping and in agricultural experiments. Recently, the Gaussian Markov random field models were...... techniques with importance sampling.   The third part of the Thesis contains applications of the theory. First, a univariate time series of count data is analysed. Then, a spatial model is used to compare wheat yields. Weed count data in connection with a project in precision farming is analysed using...

The Danish fabricated metal industry:

DEFF Research Database (Denmark)

Hansen, Teis

2010-01-01

This paper aims to contribute to the knowledge on innovation processes in low- and medium-low-tech industries. Today, industries characterised as high-tech are perceived to be central to economic development, as the research intensity shields them from competition from low-wage countries....... This is less the case for low-tech industries, but their economic importance continues to be large, however. It is thus interesting to analyse how they manage to remain competitive. The analysis focuses on a case study of the fabricated metal industry by identifying the innovation strategies followed by firms...... located in a part of Jutland, where this industry has experienced growth. It is found that the ability to create tailor-made solutions is central to the competitiveness of these medium-low-tech firms. Knowledge is thus highly important, yet in different ways than for high-tech industries. This illustrates...

The Office of Industrial Technologies - enhancing the competitiveness, efficiency, and environmental quality of American industry through technology partnerships

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

A critical component of the Federal Government`s effort to stimulate improved industrial energy efficiency is the DOE`s Office of Industrial Technologies (OIT). OIT funds research, development, and demonstration (RD&D) efforts and transfers the resulting technology and knowledge to industry. This document describes OIT`s program, including the new Industries of the Future (IOF) initiative and the strategic activities that are part of the IOF process. It also describes the energy, economic, and environmental characteristics of the materials and process industries that consume nearly 80% of all energy used by manufacturing in the United States. OIT-supported RD&D activities relating to these industries are described, and quantitative estimates of the potential benefits of many OIT-supported technologies for industry are also provided.

Industrial Electricity. In-Plant Distribution. Vocational Trade and Industrial Education.

Science.gov (United States)

Teague, Cash; Pewewardy, Garner

This curriculum guide, part of a series of industrial electricity curriculum guides, consists of materials for use in teaching a course on the in-plant distribution of electricity. Discussed in the introductory lessons are the National Electrical Code, power equipment, and blueprint reading. The next section, a series of units on branch-circuit…

The Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR): Industrial Radiography

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-08-15

Industrial radiography work is often carried out under difficult working conditions, such as in confined spaces, in extreme cold or heat, or during the night. Working under such adverse conditions might result in operational situations in which occupational radiation protection may be compromised. Experience shows that incidents involving industrial radiography sources have sometimes resulted in high doses to workers, causing severe health consequences such as radiation burns and, in a few cases, death. It has been long known that there is significant potential for industrial radiography personnel to receive non-trivial occupational exposure. However, a global perspective is lacking, as is the availability of a systematic means for improving occupational radiation protection in industrial radiography worldwide. In 2006, the IAEA published IAEA Safety Standards Series No. SF-1, Fundamental Safety Principles, jointly sponsored by the European Atomic Energy Community, the Food and Agriculture Organization of the United Nations (FAO), the International Labour Organization (ILO), the International Maritime Organization, the OECD Nuclear Energy Agency (OECD/NEA), the Pan American Health Organization (PAHO), the United Nations Environment Programme (UNEP) and the World Health Organization (WHO). That publication sets out the fundamental safety objective and principles of protection and safety. In 2014, the IAEA published IAEA Safety Standards Series No. GSR Part 3, Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards (the BSS), jointly sponsored by the European Commission, the FAO, the ILO, OECD/NEA, the PAHO, UNEP and the WHO. The BSS sets out the requirements that are designed to meet fundamental safety objectives and to apply the principles specified in IAEA Safety Standards Series No. SF-1. The establishment of safety requirements and provision of guidance on occupational radiation protection is a major component of the support

The Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR): Industrial Radiography

International Nuclear Information System (INIS)

2014-08-01

Industrial radiography work is often carried out under difficult working conditions, such as in confined spaces, in extreme cold or heat, or during the night. Working under such adverse conditions might result in operational situations in which occupational radiation protection may be compromised. Experience shows that incidents involving industrial radiography sources have sometimes resulted in high doses to workers, causing severe health consequences such as radiation burns and, in a few cases, death. It has been long known that there is significant potential for industrial radiography personnel to receive non-trivial occupational exposure. However, a global perspective is lacking, as is the availability of a systematic means for improving occupational radiation protection in industrial radiography worldwide. In 2006, the IAEA published IAEA Safety Standards Series No. SF-1, Fundamental Safety Principles, jointly sponsored by the European Atomic Energy Community, the Food and Agriculture Organization of the United Nations (FAO), the International Labour Organization (ILO), the International Maritime Organization, the OECD Nuclear Energy Agency (OECD/NEA), the Pan American Health Organization (PAHO), the United Nations Environment Programme (UNEP) and the World Health Organization (WHO). That publication sets out the fundamental safety objective and principles of protection and safety. In 2014, the IAEA published IAEA Safety Standards Series No. GSR Part 3, Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards (the BSS), jointly sponsored by the European Commission, the FAO, the ILO, OECD/NEA, the PAHO, UNEP and the WHO. The BSS sets out the requirements that are designed to meet fundamental safety objectives and to apply the principles specified in IAEA Safety Standards Series No. SF-1. The establishment of safety requirements and provision of guidance on occupational radiation protection is a major component of the support

Geometrical properties of negatively curved spaces. A revival

International Nuclear Information System (INIS)

Signore, R.L.

2000-01-01

The negatively curved space is generally kept in the background behind the much more popular positively curved space. The goal of the article is to re-establish a balance between these two different spaces. In the first part, negatively curved space is considered in se, some of its geometric properties are investigated and its Minkowskian properties emphasized. The Lobatchevsky-Bolyai geometry is also illustrated. In a second part, space is assumed to be in expansion in an inflation are. World lines, null geodesics, particle horizon, event horizon are considered

Power system requirements and selection for the space exploration initiative

International Nuclear Information System (INIS)

Biringer, K.L.; Bartine, D.E.; Buden, D.; Foreman, J.; Harrison, S.

1991-01-01

The Space Exploration Initiative (SEI) seeks to reestablish a US program of manned and unmanned space exploration. The President has called for a program which includes a space station element, a manned habitation of the moon, and a human exploration of Mars. The NASA Synthesis Group has developed four significantly different architectures for the SEI program. One key element of a space exploration effort is the power required to support the missions. The Power Speciality Team of the Synthesis Group was tasked with assessing and evaluating the power requirements and candidate power technologies for such missions. Inputs to the effort came from existing NASA studies as well as other governments agency inputs such as those from DOD and DOE. In addition, there were industry and university briefings and results of solicitations from the AIAA and the general public as part of the NASA outreach effort. Because of the variety of power needs in the SEI program, there will be a need for multiple power system technologies including solar, nuclear and electrochemical. Due to the high rocket masses required to propel payloads to the moon and beyond to Mars, there is great emphasis placed on the need for high power density and high energy density systems. Power system technology development work is needed results will determine the ultimate technology selections. 23 refs., 10 figs

Plastic Technology (Production). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

Science.gov (United States)

Claus, Robert; And Others

This course guide for a plastic technology course is one of four developed for the production area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and graphic communications.) Part 1 provides such introductory information as a definition and…

Industrial cogeneration optimization program. Final report, September 1979

Energy Technology Data Exchange (ETDEWEB)

Davis, Jerry; McWhinney, Jr., Robert T.

1980-01-01

This study program is part of the DOE Integrated Industry Cogeneration Program to optimize, evaluate, and demonstrate cogeneration systems, with direct participation of the industries most affected. One objective is to characterize five major energy-intensive industries with respect to their energy-use profiles. The industries are: petroleum refining and related industries, textile mill products, paper and allied products, chemicals and allied products, and food and kindred products. Another objective is to select optimum cogeneration systems for site-specific reference case plants in terms of maximum energy savings subject to given return on investment hurdle rates. Analyses were made that define the range of optimal cogeneration systems for each reference-case plant considering technology applicability, economic factors, and energy savings by type of fuel. This study also provides guidance to other parts of the program through information developed with regard to component development requirements, institutional and regulatory barriers, as well as fuel use and environmental considerations. (MCW)

Local industry in global networks : changing competitiveness, corporate strategies and pathways of development in Singapore and Malaysia's garment industry

NARCIS (Netherlands)

Smakman, Floortje

2004-01-01

The garment industry in Singapore and Malaysia has been incorporated into global production networks and commodity chains - driven by large US and European garment companies - since the 1960s and 1970s respectively. The industry was an intricate part of the export led industrialisation strategies

Space, Time, and Spacetime Physical and Philosophical Implications of Minkowski's Unification of Space and Time

CERN Document Server

Petkov, Vesselin

2010-01-01

This volume is dedicated to the centennial anniversary of Minkowski's discovery of spacetime. It contains selected papers by physicists and philosophers on the Nature and Ontology of Spacetime. The first six papers, comprising Part I of the book, provide examples of the impact of Minkowski's spacetime representation of special relativity on the twentieth century physics. Part II also contains six papers which deal with implications of Minkowski's ideas for the philosophy of space and time. The last part is represented by two papers which explore the influence of Minkowski's ideas beyond the philosophy of space and time.

China’s strategy in space

CERN Document Server

Solomone, Stacey

2013-01-01

This book addresses why China is going into space and provides up- to-date information on all aspects of the Chinese Space Program in terms of launch vehicles, launch sites and infrastructure, crew vehicles for space exploration, satellite applications and scientific exploration capabilities. Beyond mere capabilities, it is important to understand how Chinese aerospace leaders think, how they make decisions, and what their ultimate goal is during their space endeavors. What are Chinese intentions in space? To what extent does culture and ethics influence Chinese strategic decision-making within the highest levels of the aerospace industrial complex? This book examines these questions and offers four potential scenarios on where the Chinese space program is headed based on this new perspective of understanding China’s space goals. This book is not only required reading for policy makers and military leaders in the US government, but also for the general population, students, and professionals interested in t...

The present situation and prospect of industrial irradiation accelerator industry in China

International Nuclear Information System (INIS)

Zhao Wenyan; Wang Chuanzhen; Hou Fuzhen

2005-01-01

Accelerator technology and the machines are an important part of the nuclear technology and also are the system integration of modern science technology. The application of accelerator technology has made the important breakthrough in many science research fields, in the development course of particle physics, several milestone developments are closely related to accelerator developments. In 1960s, accelerators gradually transferred from the science research to the national economy and society application fields. In 1970s, accelerators applied in many fields involved the industry, medical hygiene, agriculture, environmental protection, and proceed the development of new technique, new craft, new product, and developed lots of newly arisen edge industries, such as the medical equipments, no damage examination, ion injecting, radiation processing. Now accelerators have become a firmly established industry. This paper primarily reviewed the application of industrial radiation accelerators by the 20 years developments of accelerators in China. (author)

Potential for energy efficiency in the Norwegian land-based industry; Potensial for energieffektivisering i norsk landbasert industri

Energy Technology Data Exchange (ETDEWEB)

2009-07-01

Process Industry Association (PIL, now the Federation of Norwegian Industries) conducted in collaboration with Enova SF, Kjelforeningen - Norwegian Energy and Institute for Energy Technology, in 2002 a study to determine the potential for more environmentally efficient energy use and production in the Norwegian process industry. It was in 2007 conducted a review of the 2002-study, and this work showed that large parts of the potential identified in 2002 were not realized, and that in addition there was further potential. Enova therefore took the initiative in 2009 to do a new review of the potential for energy efficiency in the Norwegian industry. (AG)

Representing revolution: icons of industrialization.

Science.gov (United States)

Fara, Patricia

2006-03-01

Appreciating pictures entails a consideration not only of the people, objects and landscape that their artists have chosen to portray, but also an imagining of what has been excluded. The term 'Industrial Revolution' has been given multiple meanings, and this article (part of the Science in the Industrial Revolution series) explores some of these by exposing the messages concealed inside some of the most enduring images of the Revolution.

Space tourism optimized reusable spaceplane design

Energy Technology Data Exchange (ETDEWEB)

Penn, J.P.; Lindley, C.A. [The Aerospace Corporation El Segundo, California90245-4691 (United States)

1997-01-01

Market surveys suggest that a viable space tourism industry will require flight rates about two orders of magnitude higher than those required for conventional spacelift. Although enabling round-trip cost goals for a viable space tourism business are about {dollar_sign}240 per pound ({dollar_sign}529/kg), or {dollar_sign}72,000 per passenger round-trip, goals should be about {dollar_sign}50 per pound ({dollar_sign}110/kg) or approximately {dollar_sign}15,000 for a typical passenger and baggage. The lower price will probably open space tourism to the general population. Vehicle reliabilities must approach those of commercial aircraft as closely as possible. This paper addresses the development of spaceplanes optimized for the ultra-high flight rate and high reliability demands of the space tourism mission. It addresses the fundamental operability, reliability, and cost drivers needed to satisfy this mission need. Figures of merit similar to those used to evaluate the economic viability of conventional commercial aircraft are developed, including items such as payload/vehicle dry weight, turnaround time, propellant cost per passenger, and insurance and depreciation costs, which show that infrastructure can be developed for a viable space tourism industry. A reference spaceplane design optimized for space tourism is described. Subsystem allocations for reliability, operability, and costs are made and a route to developing such a capability is discussed. The vehicle{close_quote}s ability to also satisfy the traditional spacelift market is shown. {copyright} {ital 1997 American Institute of Physics.}

Methods for converting industrial zones

Science.gov (United States)

Talipova, L.; Kosyakov, E.; Polyakova, Irina

2017-10-01

In this article, industrial zones of Saint Petersburg and Hong Kong were considered. Competitive projects aimed at developing the grey belt of Saint Petersburg were considered. The methodology of the survey of reconstruction of the industrial zone of Hong Kong is also analyzed. The potential of the city’s grey belt lies in its location on the border of the city’s historical centre. Rational use of this potential will make it possible to achieve numerous objectives, including development of the city’s transport infrastructure, positioning of business functions, and organization of housing and the city’s system of green public spaces.

Market potential for solar thermal energy supply systems in the United States industrial and commercial sectors: 1990--2030

International Nuclear Information System (INIS)

1991-12-01

This report revises and extends previous work sponsored by the US DOE on the potential industrial market in the United States for solar thermal energy systems and presents a new analysis of the commercial sector market potential. Current and future industrial process heat demand and commercial water heating, space heating and space cooling end-use demands are estimated. The PC Industrial Model (PCIM) and the commercial modules of the Building Energy End-Use Model (BEEM) used by the DOE's Energy Information Administration (EIA) to support the recent National Energy Strategy (NES) analysis are used to forecast industrial and commercial end-use energy demand respectively. Energy demand is disaggregated by US Census region to account for geographic variation in solar insolation and regional variation in cost of alternative natural gas-fired energy sources. The industrial sector analysis also disaggregates demand by heat medium and temperature range to facilitate process end-use matching with appropriate solar thermal energy supply technologies. The commercial sector analysis disaggregates energy demand by three end uses: water heating, space heating, and space cooling. Generic conceptual designs are created for both industrial and commercial applications. Levelized energy costs (LEC) are calculated for industrial sector applications employing low temperature flat plate collectors for process water preheat; parabolic troughs for intermediate temperature process steam and direct heat industrial application; and parabolic dish technologies for high temperature, direct heat industrial applications. LEC are calculated for commercial sector applications employing parabolic trough technologies for low temperature water and space heating. Cost comparisons are made with natural gas-fired sources for both the industrial market and the commercial market assuming fuel price escalation consistent with NES reference case scenarios for industrial and commercial sector gas markets

Space: A new frontier

Science.gov (United States)

Cutolo, Mona; Miranda, Denis M.

1986-08-01

The challenges and the promises of space colonization present an exciting opportunity for exploring and analyzing the values, the institutions and the physical environments we have created on Earth. Here we describe an interdisciplinary course, team-taught, that examines the current state of space exploration and the innovative technologies spawned by space research. The course also explores the possible social, economic, political and international impacts of migration to space of people and industries. A course project is to design a space colony for a community of 10,000 people. Given the technical design parameters and other details, the students are to engineer socially an ideal community, bearing in mind the short lifetimes of utopian communities of the past. The process is intended to help the students gain a fair understanding of the dynamics of human societies and of the technologies we have developed that enable us to change our world and to design new worlds.

MEMS for Space Flight Applications

Science.gov (United States)

Lawton, R.

1998-01-01

Micro-Electrical Mechanical Systems (MEMS) are entering the stage of design and verification to demonstrate the utility of the technology for a wide range of applications including sensors and actuators for military, space, medical, industrial, consumer, automotive and instrumentation products.

Center for commercial applications of combustion in space (CCACS); A partnership for space commercialization at the Colorado School of Mines

Science.gov (United States)

Schowengerdt, F. D.; Kee, Bob; Linne, Mark; McKinnon, Tom; Moore, John; Parker, Terry; Readey, Dennis; Tilton, John E.; Helble, Joe

1997-01-01

The Center for Commercial Applications of Combustion in Space (CCACS) is a NASA/Industry/University consortium at the Colorado School of Mines (CSM). The mission of the Center is to assist industry in developing commercial products by conducting combustion research which takes advantage of the unique properties of space. By conducting experiments in near-zero gravity, convection and buoyancy effects can be minimized and new fundamental design-related knowledge can be gained which can be used to improve combustion-related products and processes on earth. Companies, government laboratories and universities most actively involved in CCACS at present include ABB Combustion, ADA Technologies, Advanced Refractory Technologies, Golden Technologies, Lockheed-Martin, Southwest Sciences, Space Systems/Lora, NASA-Lewis, JPL, the Baylor Dental School and the University of Connecticut. Products and processes of interest to the Center participants include industrial process combustors; catalytic combustion; Halon replacements; ceramic powders, whiskers and fibers; metal-matrix composites; NiTi for bone replacement; diamond coatings for oil-well drill bits; zeolites; imaging sensor arrays and other instrumentation for flame and particulate diagnostics. The center also assists member companies in marketing the resulting products and processes.

A room acoustical computer model for industrial environments - the model and its verification

DEFF Research Database (Denmark)

Christensen, Claus Lynge; Foged, Hans Torben

1998-01-01

This paper presents an extension to the traditional room acoustic modelling methods allowing computer modelling of huge machinery in industrial spaces. The program in question is Odeon 3.0 Industrial and Odeon 3.0 Combined which allows the modelling of point sources, surface sources and line...... of an omnidirectional sound source and a microphone. This allows the comparison of simulated results with the ones measured in real rooms. However when simulating the acoustic environment in industrial rooms, the sound sources are often far from being point like, as they can be distributed over a large space...

New city spaces

DEFF Research Database (Denmark)

Gehl, Jan; Gemzøe, Lars

2001-01-01

2. rev. udg. engelsk udgave af 'Nye byrum'. This book presents an overview of the developments in the use and planning of public spaces, and offers a detailed description of 9 cities with interesting public space strategies: Barcelona, Lyon, Strasbourg, Freiburg and Copenhagen in Europe, Portland...... in North America, Curitiba and Cordoba in South America and Melbourne in Australia. It also portrays 39 selected public space projects from all parts of the World. The strategies and projects are extensively illustrated by drawings, plans and photographs....

Space Telecommunications Radio System (STRS) Architecture. Part 1; Tutorial - Overview

Science.gov (United States)

Handler, Louis M.; Briones, Janette C.; Mortensen, Dale J.; Reinhart, Richard C.

2012-01-01

Space Telecommunications Radio System (STRS) Architecture Standard provides a NASA standard for software-defined radio. STRS is being demonstrated in the Space Communications and Navigation (SCaN) Testbed formerly known as Communications, Navigation and Networking Configurable Testbed (CoNNeCT). Ground station radios communicating the SCaN testbed are also being written to comply with the STRS architecture. The STRS Architecture Tutorial Overview presents a general introduction to the STRS architecture standard developed at the NASA Glenn Research Center (GRC), addresses frequently asked questions, and clarifies methods of implementing the standard. The STRS architecture should be used as a base for many of NASA s future telecommunications technologies. The presentation will provide a basic understanding of STRS.

The space adventure comes to a conference at CERN

CERN Multimedia

CERN Bulletin

2012-01-01

From 5 to 7 November, CERN will host the 4th International Conference on Particle and Fundamental Physics in Space (SpacePart12). Special talks open to the general public will be given by two of the biggest names in space exploration: Edward Stone, project scientist for the Voyager probes, and William Gerstenmaier, former Manager of the International Space Station (ISS) programme.     Launched at Isola d’Elba (Italy) in 2002, then continued in Washington D.C. (USA) in 2003 and Beijing (China) in 2006, the SpacePart conferences are an opportunity for researchers and space policy makers from across the world to exchange opinions on the developments of space-related science and technology programmes. This year, SpacePart coincides with the centenary of the discovery of cosmic rays and will be held at CERN. On 5 November, Edward Stone, professor at the California Institute of Technology and project scientist for the Voyager probes since 1972, will give a talk on the extraordin...

Center for Space Power, Texas A and M University

Science.gov (United States)

Jones, Ken

Johnson Controls is a 106 year old company employing 42,000 people worldwide with $4.7 billion annual sales. Though we are new to the aerospace industry we are a world leader in automobile battery manufacturing, automotive seating, plastic bottling, and facilities environment controls. The battery division produces over 24,000,000 batteries annually under private label for the new car manufacturers and the replacement market. We are entering the aerospace market with the nickel hydrogen battery with the help of NASA's Center for Space Power at Texas A&M. Unlike traditional nickel hydrogen battery manufacturers, we are reaching beyond the space applications to the higher volume markets of aircraft starting and utility load leveling. Though space applications alone will not provide sufficient volume to support the economies of scale and opportunities for statistical process control, these additional terrestrial applications will. For example, nickel hydrogen batteries do not have the environmental problems of nickel cadmium or lead acid and may someday start your car or power your electric vehicle. However you envision the future, keep in mind that no manufacturer moves into a large volume market without fine tuning their process. The Center for Space Power at Texas A&M is providing indepth technical analysis of all of the materials and fabricated parts of our battery as well as thermal and mechanical design computer modeling. Several examples of what we are doing with nickel hydrogen chemistry to lead to these production efficiencies are presented.

Live from the Mars Hotel - Space Locations and the Film Industry

Science.gov (United States)

Sivier, D.

Space exploration is the subject of intense media interest in a way unparalleled in any other branch of science. It is the subject of countless films and television programmes, both fact and fiction, many using original footage from space. Astronauts have broadcast live from the Moon, and TV journalists have travelled to Mir, similar to the use of exotic terrestrial locations for filming by professional film crews. Although prohibitively expensive at the moment, the next generation of spacecraft may lower launch costs to an affordable level, so that space locations become competitive against computer graphics and model work. The construction of orbital hotels will create the demand for human interest stories similar to those set in holiday locations like the south of France and Italy made just after the Second World War, at a time when mass tourism on foreign holidays was just beginning, aided by the development of large transport aircraft able to cater to the demand for mass flight.

The 2017 Space Resources Roundtable and New Space Resources Graduate Program at Colorado School of Mines

Science.gov (United States)

Abbud-Madrid, A.

2017-10-01

For eighteen years, SRR has brought together interested individuals from the space exploration community, the mining and minerals industries, and the financial sector to discuss issues related to the ISRU of lunar, asteroidal, and martian resources.

Considerations when analyzing investment in space transportation business ventures

Science.gov (United States)

S. Greenberg, Joel

2000-07-01

Private sector investment in space transportation, as in most business situations, requires the development of realistic and believable business plans that demonstrate that if an investment is made that there is a reasonable chance that the indicated financial performance will attract the necessary financing. The business plan must also indicate the assumptions upon which the plan rests, and as has become almost second nature to the space transportation industry, the necessary role of the government in risk reduction and/or capital formation [i.e., government actions that are necessary to make the business venture financially attractive]. This paper discusses and describes several factors that must be considered, by both government and industry, when developing a business plan for obtaining financing for space transportation business ventures.

Pompes à chaleur dans l'industrie Heat Pumps in Industry

Directory of Open Access Journals (Sweden)

Benchecroun N.

2006-11-01

Full Text Available Les pompes à chaleur pourraient permettre une réduction de la consommation énergétique de l'industrie française estimée à 3,5 Mtep à l'horizon 1990 (300 000 tep en 1982. Ces installations se situeront dans les domaines du chauffage des locaux industriels, du séchage à basse température, du réchauffage de liquides et de certaines opérations de fractionnement. Pour les utilisations dans des procédés industriels les secteurs concernés sont principalement les industries agroalimentaires et, à plus long terme, celui de la chimie (y compris pétrochimie. On constate que les ventes de machines de forte puissance restent faibles (environ 500 de 1973 à 1982. Le climat général d'investissement, la nécessité d'adapter les procédés à l'utilisation d'une pompe à chaleur, et le faible niveau de température Heat pumps could be used to reduce energy consumption by French industry which may attain 3. 5 million tOE by 1990 (300 000 tOE in 1982. Such installations will be used in the fields of industrial space heating, low-temperature drying, the heating of liquids and various fractionating operations. For uses in industrial processes, the sectors involved are mainly agribusiness and food industries and, in the longer range, the chemical industry (including petrochemicals. Sales of high-powered machinery are still low (about 500 from 1973 to 1982. The general investment climate, the need to adapt processes to the use of heat pumps, and the low temperature level (< 120 °C of the heat delivered are the main factors holding back the penetration of this type of equipment in industry. The use of a nonazeotropic mixture of fluids (particularly hydrocarbons gives compression heat pumps a flexibility of adaptation which should help remove these technicalobstacles and thus make it easier for heat pumps to penetrate, especially in the chemical sector.

The Tobacco Industry and Children's Rights.

Science.gov (United States)

van der Eijk, Yvette; Bialous, Stella A; Glantz, Stanton

2018-05-01

The manufacture, use, and marketing of tobacco present a serious threat to children's right to health. This makes the Convention on the Rights of the Child a potentially powerful tobacco-control tool and the United Nations Children's Fund (UNICEF), which oversees the convention's implementation, a potential leader in tobacco control. UNICEF actively supported tobacco control initiatives in the late 1990s, but since the early 2000s UNICEF's role in tobacco control has been minimal. Using the Truth Tobacco Industry Documents library, an online collection of previously secret tobacco industry documents, we sought to uncover information on the tobacco industry's ties with UNICEF. We found that from 1997 to 2000, when UNICEF was actively promoting tobacco control to support children's rights, the tobacco industry saw children's rights and UNICEF as potentially powerful threats to business that needed to be closely monitored and neutralized. The industry then positioned itself as a partner with UNICEF on youth smoking prevention initiatives as a way to avoid meaningful tobacco control measures that could save children's lives. After UNICEF's corporate engagement guidelines were loosened in 2003, tobacco companies successfully engaged with UNICEF directly and via front groups, including the Eliminating Child Labour in Tobacco Growing Foundation. This was part of an overall tobacco industry strategy to improve its corporate image, infiltrate the United Nations, and weaken global tobacco-control efforts. As part of its mission to protect children's rights, UNICEF should end all partnerships with the tobacco industry and its front groups. Copyright © 2018 by the American Academy of Pediatrics.

Space Elevators: Building a Permanent Bridge for Space Exploration and Economic Development

Science.gov (United States)

Smitherman, David V., Jr.; Howell, Joe T. (Technical Monitor)

2000-01-01

A space elevator is a physical connection from the surface of the Earth to a geo-stationary orbit above the Earth approximately 35,786 km in altitude. Its center of mass is at the geo-stationary point such that it has a 24-hour orbit, and stays over the same point above the equator as the Earth rotates on its axis. The structure is utilized as a transportation and utility system for moving payloads, power, and gases between the surface of the Earth and space. It makes the physical connection from Earth to space in the same way a bridge connects two cities across a body of' water. The space elevator may be an important concept for the future development of space in the latter part of the 21th century. It has the potential to provide mass-transportation to space in the same way highways, railroads, power lines, and pipelines provide mass-transportation across the Earth's surface. The low energy requirements for moving payloads up and down the elevator make it one of only a few concepts that has the potential of lowering the cost to orbit to less than $10 per kilogram. This paper will summarize the findings from a 1999 NASA workshop on Space Elevators held at the NASA Marshall Space Flight Center (MSFC). The workshop was sponsored by the Advanced Projects Office in the Flight Projects Directorate at MSFC, and was organized in cooperation with the Advanced Space Transportation Program at MSFC and the Advanced Concepts Office in the Office of Space Flight at NASA Headquarters. New concepts will be examined for space elevator construction and a number of issues will be discussed that has helped to bring the space elevator concept out of the realm of science fiction and into the realm of possibility. In conclusion, it appears that the space elevator concept may well he possible in the latter part of the 21st century if proper planning and technology development is emphasized to resolve key issues in the development of this advanced space infrastructure concept.

Selected aspects of the supply chain management in the aerospace industry

Directory of Open Access Journals (Sweden)

Ivan KOBLEN

2013-03-01

Full Text Available The paper in the introductory part underlines some factors concerning the aerospace supply chain management (SCM issue. Authors inform on selected definitions in this topic, levels of supply chain and its maturity. The authors are focusing on introducing of the explanation of main specifics of SCM in aerospace industry (original equipment manufacturer, processes and requirements for the suppliers selection and subsequently inform on the role and mission of selected international organizations involved in aerospace SCM and quality issues, namely The Aerospace and Defence Industries Association of Europe (ASD, International Aerospace Quality Group (IAQG and European Aerospace Quality Group (EAQG. The information on Quality Management System in the framework of aerospace industry and SCM are also introduced. The part of paper is dealing with information systems useful in the SCM (the Digital Product Chain and Enterprise Resource Planning. The last part of paper is focused on issue concerning the success factors for SCM in the aerospace industry. In the conclusion part the authors emphasize some aspects and factors regarding the aerospace SCM and summarize the key challenges in the area of SCM in the aerospace industry.