Suborbital industry at the edge of space

CERN Document Server

Seedhouse, Erik

2014-01-01

Until recently, spaceflight has been the providence of a select corps of astronauts whose missions, in common with all remarkable exploits, were experienced vicariously by the rest of the world via television reports and Internet feeds. These spacefarers risked their lives in the name of science, exploration and adventure, thanks to government-funded manned spaceflight programs. All that is about to change The nascent commercial suborbital spaceflight industry will soon open the space frontier to commercial astronauts, payload specialists and, of course, spaceflight participants. Suborbital explains the tantalizing science opportunities offered when suborbital trips become routine and describes the difference in training and qualification necessary to become either a spaceflight participant or a fully fledged commercial suborbital astronaut. Suborbital also explains how the commercial suborbital spaceflight industry is planning and preparing for the challenges of marketing the hiring of astronauts. It examine...

Model of analyzing and forecasting the dynamics of industrial production and space sector of the Russian Federation

Directory of Open Access Journals (Sweden)

Dmitriy Yu. Ivanov

2016-01-01

Full Text Available Objective to carry out a comparative analysis of the dynamics of industrial production and the rocket and space industry of Russia. Methods an asynchronous method of harmonic analysis comparative method. Results the forecasts of the development of rocket and space industry for 2015 and 2016 are obtained which are compared with the data of the Ministry of Economic Development and the World Bank of Development. The comparison of the results showed that the analysis and forecast data of the Ministry of Economic Development and the World Bank of Development coincide only partially. The tendency to increase the volumes in rocket and space industry is shown. Scientific novelty the mathematical models are presented for the dynamics of industrial production and the rocket and space industry of the Russian Federation built on the basis of the asynchronous harmonic analysis. The retrospective of the rocketspace complex development is considered. Practical significance using the proposed mathematical models of the dynamics of industrial production and the rocket and space industry of the Russian Federation based on the economy cycles the more accurate forecasts of economic development can be made. nbsp

Sustainable industrial estate by managing the building coverage ratio in Cibitung Industrial Town, Indonesia

Science.gov (United States)

Budiyanto, T. M. T.; Prajitno, I. S.; Hasibuan, H. S.

2018-03-01

The problem faced in the management of the industrial estate is the development of industrial buildings which are not in accordance with the existing environmental regulations, especially the building coverage ratio (BCR). This violation is due to the limitation of industrial land owned, and the tenant’s desire to maximize building area. This research conducted at Cibitung Industrial Town, Indonesia, to assess the compliance of industrial building in complying with environmental regulations, and efforts by industrial estate manager together with industrial communities to meet building regulations. The compliance is shown from the conformity of the tenant’s BCR to the building provisions contained in the regulation within the industrial estate; which is maximum 60% from land owned. And whether the rest of green open space (GOS) area can still be maintained at a minimum 10%. This study found tenant’s building density (BCR) at 24.55% population was 84.77%, and the rest of green open space at 21.56% population was only 2.49%. Excessive building development and expansion by the industrial communities, led to a continued reduction in green open space as a rainwater absorption area. It is resulting the rainfall runoff directly into the environmental drainage system, and causing flooding in the region.

L'espace articulaire de la Robotique Industrielle est un espace vectorielIndustrial Robotics joint space is a vector space

Science.gov (United States)

Tondu, Bertrand

2003-05-01

The mathematical modelling of industrial robots is based on the vectorial nature of the n-dimensional joint space of the robot, defined as a kinematic chain with n degrees of freedom. However, in our opinion, the vectorial nature of the joint space has been insufficiently discussed in the literature. We establish the vectorial nature of the joint space of an industrial robot from the fundamental studies of B. Roth on screws. To cite this article: B. Tondu, C. R. Mecanique 331 (2003).

The economics of bootstrapping space industries - Development of an analytic computer model

Science.gov (United States)

Goldberg, A. H.; Criswell, D. R.

1982-01-01

A simple economic model of 'bootstrapping' industrial growth in space and on the Moon is presented. An initial space manufacturing facility (SMF) is assumed to consume lunar materials to enlarge the productive capacity in space. After reaching a predetermined throughput, the enlarged SMF is devoted to products which generate revenue continuously in proportion to the accumulated output mass (such as space solar power stations). Present discounted value and physical estimates for the general factors of production (transport, capital efficiency, labor, etc.) are combined to explore optimum growth in terms of maximized discounted revenues. It is found that 'bootstrapping' reduces the fractional cost to a space industry of transport off-Earth, permits more efficient use of a given transport fleet. It is concluded that more attention should be given to structuring 'bootstrapping' scenarios in which 'learning while doing' can be more fully incorporated in program analysis.

INVESTIGATION OF MARKETING TECHNOLOGIES IN THE INNOVATION PROCESS OF ROCKET AND SPACE INDUSTRY

Directory of Open Access Journals (Sweden)

K. B. Dobrova

2016-01-01

Full Text Available In this article we have studied the use of marketing technologies in the innovation process of enterprises of rocket and space industry. The present study specifies the relevance of chosen research topic, as well as the essence of marketing innovations at the enterprises of rocket and space industry, the structuring of marketing and management processes in the innovation process. There are provided the most common analytical instruments in the marketing and there is marked the importance of use of a global strategy for the enterprises of rocket and space industry. The article also specifies a clear example of application of marketing technologies in the innovation process of the Federal State Unitary Enterprise "State Space Research and Production Center named after Khrunichev M.V'.'. At the beginning the role and place of innovation management and innovation process in the strategic management of the FSUE "SSRPC named after Khrunichev M.V." are shown. Then there are described the basic marketing methods of program-oriented management of the innovation process in the FSUE "SSRPC named after Khrunichev M.V"" and there is highlighted the innovation marketing strategy of the FSUE "SSRPC named after Khrunichev M.V.". There are presented the distinctive features of the competitive strategy of the company of the rocket and space industry and the features of formation (development of the innovative enterprise development strategy based on marketing innovation in the FSUE "SSRPC named after Khrunichev M.V.". The conclusion includes the main findings of the study conducted.

Design and control considerations for industrial and space manipulators

Science.gov (United States)

Whitney, D. E.; Book, W. J.; Lynch, P. M.

1974-01-01

This paper is a progress report summarizing theoretical and practical results concerning integration of design and control aspects of manipulator arms for industrial or space applications. The relationships between task specifications, gross motions, fine motions, actuator type and location, size and strength of structural members, control servos and strategies, and overall design evaluation are briefly discussed, with some technical examples.

21 reports of future industry

International Nuclear Information System (INIS)

2001-02-01

This book deals with 21 reports on future industry, which contain revolution of digital educations, genetic engineering, the newest medical device, environmental industry, artificial intelligence, virtual reality, bio-green revolution, energy of the future, advanced concept computer, e-commerce, digital cash, game industry, information technology for future, next DRAM, information protection industry, robot to replace manpower, medium for information display, navigation systems, a space development, design industry and, home automation.

Industrial Dynamics and Economic Geography

NARCIS (Netherlands)

Capasso, Marco|info:eu-repo/dai/nl/314016627; Stam, Erik|info:eu-repo/dai/nl/215649370; Cefis, Elena|info:eu-repo/dai/nl/274516233

2015-01-01

Capasso M., Stam E. and Cefis E. Industrial dynamics and economic geography, Regional Studies. How do industries emerge and evolve over space? In this special issue the fields of industrial dynamics and economic geography are brought together in order to achieve a richer and more fundamental

Industry's Commercial Initiatives on ISS

Science.gov (United States)

Shields, C. E.; Kessler, C.; Lavitola, M. S.

2002-01-01

For more than ten years, private industry has worked to develop a commercial human space market and to create a sustainable ISS commercial utilization customer base. Before ISS assembly was underway - and long before NASA and the international space agencies began to craft ISS commercial business terms and conditions - industry planted and nurtured the seeds of interest in exploiting human space utilization for commerce. These early initiatives have yielded the impetus and framework for industry approaches to ISS commercial utilization today and for NASA's and the International Partners' planned accommodation of private sector interests and desires on the ISS. This paper chronicles major industry initiatives for commercial ISS utilization, emphasizing successful marketing and business approaches and why these approaches have a higher likelihood of success than others. It provides an overview of individual companies' initiatives, as well as collaborative efforts that cross company lines and country borders; and it assesses the relative success of each. Rather than emphasize negative issues and barriers, this paper characterizes and prioritizes actionable success factors for industry and government to make ISS commercial utilization a sustainable reality.

Analysis of Energy Industry Upgrading in Northeast China

Science.gov (United States)

Liu, Xiao-jing; Ji, Yu-liang; Guan, Bai-feng; Jing, Xin

2018-02-01

Promoting regional economic growth and realizing the transformation of the mode of economic growth are in industrial upgrading essence The product is a carrier that represents a series of links of production, management and marketing behind the enterprise, and is a comprehensive reflection of the knowledge and ability of a country or region. Based on the industrial spatial structure, this paper visualizes the industrial space in Northeast China from 2005 to 2015, analyzes the comparative advantages of the energy industry in Northeast China, and examines the status quo of the upgrade of the energy industry according to the industrial upgrading status. Based on the industrial spatial structure, Industry intensity in the industrial space, put forward the future direction of the energy industry upgrade and upgrade path.

Process industry properties in nuclear industry

International Nuclear Information System (INIS)

Zheng Hualing

2005-01-01

In this article the writer has described the definition of process industry, expounded the fact classifying nuclear industry as process industry, compared the differences between process industry and discrete industry, analysed process industry properties in nuclear industry and their important impact, and proposed enhancing research work on regularity of process industry in nuclear industry. (authors)

Third Space Weather Summit Held for Industry and Government Agencies

Science.gov (United States)

Intriligator, Devrie S.

2009-12-01

The potential for space weather effects has been increasing significantly in recent years. For instance, in 2008 airlines flew about 8000 transpolar flights, which experience greater exposure to space weather than nontranspolar flights. This is up from 368 transpolar flights in 2000, and the number of such flights is expected to continue to grow. Transpolar flights are just one example of the diverse technologies susceptible to space weather effects identified by the National Research Council's Severe Space Weather Events—Understanding Societal and Economic Impacts: A Workshop Report (2008). To discuss issues related to the increasing need for reliable space weather information, experts from industry and government agencies met at the third summit of the Commercial Space Weather Interest Group (CSWIG) and the National Oceanic and Atmospheric Administration's (NOAA) Space Weather Prediction Center (SWPC), held 30 April 2009 during Space Weather Week (SWW), in Boulder, Colo.

Implementing CDIO Approach in preparing engineers for Space Industry

Directory of Open Access Journals (Sweden)

Daneykin Yury

2017-01-01

Full Text Available The necessity to train highly qualified specialists leads to the development of the trajectory that can allow training specialists for the space industry. Several steps have been undertaken to reach this purpose. First, the University founded the Space Instrument Design Center that promotes a wide range of initiatives in the sphere of educating specialists, retraining specialists, carrying out research and collaborating with profiled enterprises. The University introduced Elite Engineering Education system to attract talented specialist and help them to follow individual trajectory to train unique specialist. The paper discusses the targets necessary for achievement to train specialists. Moreover, the paper presents the compliance of the attempts with the CDIO Approach, which is widely used in leading universities to improve engineering programs.

Industrial safety in power plants

International Nuclear Information System (INIS)

1987-01-01

The proceedings of the VGB conference 'Industrial safety in power plants' held in the Gruga-Halle, Essen on January 21 and 22, 1987, contain the papers reporting on: Management responsibility for and legal consequences of industrial safety; VBG 2.0 Industrial Accident Prevention Regulation and the power plant operator; Operational experience gained with wet-type flue gas desulphurization systems; Flue gas desulphurization systems: Industrial-safety-related requirements to be met in planning and operation; the effects of the Hazardous Substances Ordinance on power plant operation; Occupational health aspects of heat-exposed jobs in power plants; Regulations of the Industrial Accident Insurance Associations concerning heat-exposed jobs and industrial medical practice; The new VBG 30 Accident Prevention Regulation 'Nuclear power plants'; Industrial safety in nuclear power plants; safe working on and within containers and confined spaces; Application of respiratory protection equipment in power plants. (HAG) [de

The approach to risk analysis in three industries: nuclear power, space systems, and chemical process

International Nuclear Information System (INIS)

Garrick, B.J.

1988-01-01

The aerospace, nuclear power, and chemical processing industries are providing much of the incentive for the development and application of advanced risk analysis techniques to engineered systems. Risk analysis must answer three basic questions: What can go wrong? How likely is it? and What are the consequences? The result of such analyses is not only a quantitative answer to the question of 'What is the risk', but, more importantly, a framework for intelligent and visible risk management. Because of the societal importance of the subject industries and the amount of risk analysis activity involved in each, it is interesting to look for commonalities, differences, and, hopefully, a basis for some standardization. Each industry has its strengths: the solid experience base of the chemical industry, the extensive qualification and testing procedures of the space industry, and the integrative and quantitative risk and reliability methodologies developed for the nuclear power industry. In particular, most advances in data handling, systems interaction modeling, and uncertainty analysis have come from the probabilistic risk assessment work in the nuclear safety field. In the final analysis, all three industries would greatly benefit from a more deliberate technology exchange program in the rapidly evolving discipline of quantitative risk analysis. (author)

Industry's use of electric power

International Nuclear Information System (INIS)

1986-10-01

Alternative energy supplies and adaptation to energy demand are elucidated, primarily concerning space heating and industry. The consequences of the alternatives on the economic development of Sweden, the growth of industry, the situation of households and the effects of health and environment are being analysed. It is concluded that considerable portions of the industry will loose their competitive advantages. There will be restricted possibilities to solve the technical adaptation to the year 1997

Space-Derived Imagery and a Commercial Remote Sensing Industry: Impossible Dream or Inevitable Reality?

Science.gov (United States)

Murray, Felsher

Landsat-1 was launched in 1972 as a research satellite. Many of us viewed this satellite as a precursor to remote sensing "commercialization." Indeed since that time, the birth, growth and maturation of a remote sensing "industry" has been an ongoing objective for much of the U.S. private sector engaged in space and ground-segment activities related to the acquisition, analysis, and dissemination of imagery. In September 1999 a U.S. commercial entity, Space Imaging, Inc. launched its 1-meter pan/4-meter multispectral IKONOS sensor. DigitalGlobe, Inc. (nee EarthWatch, Inc.) matched this feat in October 2001. Thus, a full 30 years later, we are finally on the brink of building a true remote sensing information industry based on the global availability of competitively-priced space- derived imagery of the Earth. The upcoming availability of similar imagery from non-U.S. sources as ImageSat and U.S. sources as ORBIMAGE will only strengthen that reality. However, a remote sensing industry can only grow by allowing these entities (in times of peace) unencumbered access to a world market. And that market continues to expand -- up 11% in 2001, with gross revenues of U.S. commercial remote sensing firms alone reaching 2.44 billion, according to a joint NASA/ASPRS industry survey. However, the 30-year gap between the research-labeled Landsat-1 and our current commercial successes was not technology-driven. That lacuna was purely political -- driven by valid concerns related to national security. Although the world's governments have cooperated thoroughly and completely in areas related to satellite telecommunications, cooperation in space-derived image information is still today done cautiously and on a case-by-case basis -- and then only for science- based undertakings. It is still a fact that, except for the United States, all other Earth-imaging satellites/sensors flying today are owned, operated, and their products disseminated, by national governments -- and not private

Industrial applications of refrigeration. Utilizing industries; Applications industrielles du froid. Industries utilisatrices

Energy Technology Data Exchange (ETDEWEB)

Marvillet, Ch. [Ecole Centrale de Lyon, 69 - Ecully (France); Groupement pour la Recherche sur les Echangeurs Thermiques, GRETh (France)

2001-10-01

Refrigeration is used in most of the industrial domains: food industry (conservation of the organoleptic properties and sanitary quality of products, control of fermentation, of juice concentration and of the dehydration of products), transformation industries (plastic industry, rubber industry, mechanical industry (fretting, hardening and surface treatment of materials, dehumidification of compressed air), liquefaction and purification of industrial gases and hydrocarbons, processing of wastes (removal of VOCs, purification of liquid effluents etc..), civil engineering (consolidation of soils, cooling of big concrete structures), leisure (skating rink, artificial snow). (J.S.)

Training industry needs & Technology Industry needs

NARCIS (Netherlands)

Klemke, Roland; Kuula, Timo; Helin, Kaj; Wild, Fridolin

2017-01-01

This deliverable joins D1.1 (User Industry Needs) and D1.2 (Technology Industry Needs and Affordances) and reports on the outcomes of Tasks T1.1 (Training Industry Assessment) and T1.2 (Technology Industry Assessment). We merged the deliverables for the following reasons: For readability ease we

Industrial initiatives in the wind industry

International Nuclear Information System (INIS)

Edworthy, J.

1992-01-01

Industrial initiatives are methods of lobbying and marketing to increase the activity, revenues, profits, and commercial viability of an industry. They may be undertaken by industry individuals or firms, industry groups, government agencies, or combinations of all these. In Canada, one example of an industrial initiative is the Canadian Wind Energy Association. Other initiatives relevant to the wind power industry include Technology Inflow Programs sponsored by External Affairs Canada, used for visiting foreign firms with the view to licensing foreign technology, and Industrial Research Assistance Programs to develop or adapt new technologies in partnership with government. The Conservation/Renewable Energy Council, Small Power Producers of Alberta, and Independent Power Producers Society of Ontario are also active in supporting wind energy initiatives. In other countries, notable initiatives for wind energy include the Danish wind turbine warranty guarantee program. The Western Wind Industry Network of Canada conducts regional lobbying. It is suggested that in Canada, more such networks are needed, as well as joint ventures with utilities and governments, and more work with the regulatory agencies, to promote wind energy

The approach to risk analysis in three industries

International Nuclear Information System (INIS)

Garrick, B.J.

1991-01-01

It is the purpose of this paper to review how risk and safety analysis is performed in the three major industries of nuclear power, space flight, and chemical and petroleum processes. The underlying reason for such a review is the belief that efficiencies and safety enhancements may result from a greater exchange of risk assessment technology between these industries. The thrust of this discussion related to the engineered systems involved in the three industries. The industries are very different. The chemical industry epitomizes the highly competitive private sector and its bottom-line emphasis; the nuclear power industry is unique by the degree to which it is regulated; and the space industry is essentially a government business just beginning to have commercial implications. Institutional differences are extreme; however, from a societal needs, and their safety implications have a far reaching impact on public opinion and support. In reviewing the risk and safety analysis activities, particular attention is given to the use of such quantitative approaches as probabilistic risk assessment (PRA) as it has evolved in the nuclear power industry

Pompes à chaleur dans l'industrie Heat Pumps in Industry

Directory of Open Access Journals (Sweden)

Benchecroun N.

2006-11-01

Full Text Available Les pompes à chaleur pourraient permettre une réduction de la consommation énergétique de l'industrie française estimée à 3,5 Mtep à l'horizon 1990 (300 000 tep en 1982. Ces installations se situeront dans les domaines du chauffage des locaux industriels, du séchage à basse température, du réchauffage de liquides et de certaines opérations de fractionnement. Pour les utilisations dans des procédés industriels les secteurs concernés sont principalement les industries agroalimentaires et, à plus long terme, celui de la chimie (y compris pétrochimie. On constate que les ventes de machines de forte puissance restent faibles (environ 500 de 1973 à 1982. Le climat général d'investissement, la nécessité d'adapter les procédés à l'utilisation d'une pompe à chaleur, et le faible niveau de température Heat pumps could be used to reduce energy consumption by French industry which may attain 3. 5 million tOE by 1990 (300 000 tOE in 1982. Such installations will be used in the fields of industrial space heating, low-temperature drying, the heating of liquids and various fractionating operations. For uses in industrial processes, the sectors involved are mainly agribusiness and food industries and, in the longer range, the chemical industry (including petrochemicals. Sales of high-powered machinery are still low (about 500 from 1973 to 1982. The general investment climate, the need to adapt processes to the use of heat pumps, and the low temperature level (< 120 °C of the heat delivered are the main factors holding back the penetration of this type of equipment in industry. The use of a nonazeotropic mixture of fluids (particularly hydrocarbons gives compression heat pumps a flexibility of adaptation which should help remove these technicalobstacles and thus make it easier for heat pumps to penetrate, especially in the chemical sector.

INDUSTRI KREATIF INDONESIA: PENDEKATAN ANALISIS KINERJA INDUSTRI

Directory of Open Access Journals (Sweden)

Ahmad Kamil

2015-10-01

Full Text Available In 2008, the Department of Commerce of the Republic of Indonesia has launched a creative economic development documents interpreted the 2025 Indonesia became the starting point and guide the development of the creative economy in Indonesia. With the existence of this document, the industry and its stakeholders or other stakeholders can readily develop the creative economy in Indonesia. Economic development in the direction of the creative industries is one manifestation of optimism aspiration to support the Master Plan for the Acceleration and Expansion of Indonesia's Economic Development in realizing the vision of Indonesia are being developed nation. The main objective of this study is the first to analyze the role of the creative industries in Indonesia for labor, value added and productivity, secondly, to analyze the performance trend of the creative industries sector, and third, to analyze the factors affecting the performance of the creative industries sector in Indonesia. Under Indonesia Standard Industrial Classification (ISIC and codes 151-372 (manufacturing industries category identified 18 industry groups belonging to the creative industries, showed that the performance of the national creative industries has been relatively high (in terms of trend analysis of the performance of the industrial creative. Furthermore, regression analysis of panel data (econometrics indicates that company size (SIZE, wages for workers (WAGE and the content of local inputs (LOCAL has a significant impact on the performance of Indonesia's creative industry. Meanwhile, the concentration ratio (CR4 no consequences but have koresi significantly positive effect on the performance of Indonesia’s creative industry.

Applying industrial symbiosis to chemical industry: A literature review

Science.gov (United States)

Cui, Hua; Liu, Changhao

2017-08-01

Chemical industry plays an important role in promoting the development of global economy and human society. However, the negative effects caused by chemical production cannot be ignored, which often leads to serious resource consumption and environmental pollution. It is essential for chemical industry to achieve a sustainable development. Industrial symbiosis is one of the key topics in the field of industrial ecology and circular economy, which has been identified as a creative path leading to sustainability. Based on an extensively searching for literatures on linking industrial symbiosis with chemical industry, this paper aims to review the literatures which involves three aspects: (1) economic and environmental benefits achieved by chemical industry through implementing industrial symbiosis, (2) chemical eco-industrial parks, (3) and safety issues for chemical industry. An outlook is also provided. This paper concludes that: (1) chemical industry can achieve both economic and environmental benefits by implementing industrial symbiosis, (2) establishing eco-industrial parks is essential for chemical industry to implement and improve industrial symbiosis, and (3) there is a close relationship between IS and safety issues of chemical industry.

Industrializing the near-earth asteroids: Speculations on human activities in space in the latter half of the 21st century

Science.gov (United States)

Sercel, Joel C.

1990-01-01

The use of solar system resources for human industry can be viewed as a natural extension of the continual growth of our species' habitat. Motivations for human activities in space can be discussed in terms of five distinct areas: (1) information processing and collection; (2) materials processing; (3) energy production to meet terrestrial power needs; (4) the use of extraterrestrial materials; and (5) disaster avoidance. When considering 21st-Century activities in space, each of these basic motivations must be treated in light of issues likely to be relevant to the 21st-Century earth. Many of the problems facing 21st-Century earth may stem from the need to maintain the world population of 8 to 10 billion people as is projected from expected growth rates. These problems are likely to include managing the impact of industrial processes on the terrestrial biosphere while providing adequate energy production and material goods for the growing population. The most important human activities in space in the latter half of the 21st Century may be associated with harnessing the resources of the near-earth asteroids for industrial processes. These above topics are discussed with an emphasis on space industrialization.

The industrial and cultural heritage in landscape: Industrial Heritage, Landscape, Intelligent Territory

Directory of Open Access Journals (Sweden)

Miguel Ángel Álvarez Areces

2010-03-01

Full Text Available Scenic values, industrial traces and artistic heritage are intertwined in a continuous space. IndustrialHeritage has acquired a meaning beyond the aesthetic or testimonial to become a spatial or temporalcore face of forgetfulness and loss of place memory. The “smartplaces”, where active communitieslive, are or were able to organize themselves to design and reach a consensus concerning a projectfor the future. There is no approach to conservation, preservation and enhancement, or new uses ofheritage without assuming a new ethic regarding the natural and urban environment, with new spacesfor reflection to deal environmental issues with coherence, new spaces for working, especially at theregional level, taking into account the singularity of the physical environment, the complexity of energyand natural heritage resources. In the mining heritage, the whole vision is essential for a moreeffective results in the conservation job. It should not be considered a marginal issue but a priority inurban and regional planning. In the "architectural complex" cultural identity is implied, as well asindustrial and cultural landscapes, concerning to mining history, sometimes it is a discontinuous process. It takes centuries with remains and vestiges, and grouping of urban and rural constructions that have an interest in the surroundings. It analyses several Spanish and international experiences,cases and archetypes from regions with significant vestiges of the industrial revolution which illustratethe limits and possibilities of regional development programs, cultural and industrial tourism,museums, civic and social facilities which incite an interrelationship between nature, culture andindustry.

Simulation of obstacles’ effect on industrial robots’ working space using genetic algorithm

Directory of Open Access Journals (Sweden)

M.F. Aly

2014-07-01

Full Text Available The study of robot workspace is an interesting problem since its applications are directly related to industry. However, it involves several mathematical complications; Thus, many of the arising questions are left without a definite answer. With the motivation of industrial demand, the need for finding better answers than the existing ones lasts. The workspace (WS determination of a robot with general structural parameters is a complex problem, which cannot be solved in an explicit way. Closed form solutions are only available in some particular cases. Otherwise, computational algorithms and numerical techniques are used. The task becomes even much more complicated by the presence of obstacles in the robot accessible region. Obstacle presence does not only exclude points from the original WS but it affects the whole robot workspace’s shape and size to the extent that it sometimes divides the working space in two or more separate regions that cannot be linked by the same robot. Much research work in the literature is directed toward path planning in the presence of obstacles without having to determine the robot WS. However, a real situation in industry occurs when the knowledge of the WS is of importance in facility layout. This paper presents an approach for the estimation of a generic open-chain robot in the presence of obstacles with any desired number of prismatic and/or revolute joints of any order. Joints’ axes may have any orientation relative to each other. The robot can be placed in free space or in a work cell consisting of a set of Computer Numerically Controlled (CNC machines and some obstacles.

Petroleum industry of Korea seen from industry

Energy Technology Data Exchange (ETDEWEB)

Kim, H.P. [SK Co, Seoul (Korea, Republic of)

1998-05-01

The domestic petroleum industry faced with outward opening and exchange crisis is put under the most difficult period so far, and costs reduction and securing international competitive power in software field are emerging as important assignments on which the life and death of national key industries depends not only as a restructuring issue of each petroleum company. Required strategy of petroleum industry to solve this effectively this year must be the thorough revamping through restructuring and reform of management standards not the survival exercise through price competition. For this, each petroleum company and distributor should open a new petroleum industry in which fair rules of the game are developed as well as costs reduction through joint efforts and value creation in overall industry. For this, government should support the domestic petroleum industry to stand up straight as a keeper of domestic energy industry by helping it to arm with international competitive power within a short period of time through overall needed system and legal scheme. It is because nobody can deny that energy industry is the key industry on which national existence is at stake.

Relevance of Industrial and Science Parks to Industrial ...

African Journals Online (AJOL)

Here, we reviewed the impact of Industrial and Science Parks on industrial ... and stimulate the development of small and medium size enterprises as a base for ... In order to achieve these, emphasis should be on establishing Industrial and ... transfer, industrial park, Science Park, industrial development, innovation, ...

BEOS-A new approach to promote and organize industrial ISS utilization

Science.gov (United States)

Luttmann, Helmut; Buchholz, Henning; Bratke, Burkhard; Hueser, Detlev; Dittus, Hansjörg

2000-01-01

In order to develop and to market innovative services and products for the operation of the ISS and its utilization, three players have teamed up together and established an entity called BEOS (Bremen Engineering Operations Science). The team is made up of DaimlerChrysler Aerospace, OHB-System and ZARM, the Center of Applied Space Technology and Microgravity at the University of Bremen. It is the aim of BEOS to represent a competent industrial interface to potential ISS users from the space and non-space industries. In this effort BEOS is supporting and supplementing the activities of the space agencies, especially in the field of industrial and/or commercial ISS utilization. With this approach BEOS is creating new business opportunities not only for its team members but also for its customers from industry. Besides the fostering of industrial research in space, nontechnical fields of space utilization like entertainment, advertisement, education and space travel represent further key sectors for the marketing efforts of BEOS. .

Education-industry partnership: the chemical industry experience

International Nuclear Information System (INIS)

Bricknell, D.J.

1994-01-01

The European Chemical Industry and the Nuclear Power Industry share similar problems and hopefully can share similar solutions to them. A recent survey of public opinion conducted on behalf of the chemical industry has shown that the general public knows little about the industry and does not trust it to behave responsibly. The industry is responding in two ways: firstly to demonstrate that it is a responsible member of the community by operating to the highest safety and environmental standards and by being open in its dealings with the public on such matters. Secondly the industry is working with the education system to ensure that the public has the opportunity to gain a good education in science, is able to make rational judgments about risks and benefits and is better able to understand and accept the role of the chemical industry in society

Industry

International Nuclear Information System (INIS)

Schindler, I.; Wiesenberger, H.

2001-01-01

This chapter of the environmental control report deals with the environmental impact of the industry in Austria. It gives a review of the structure and types of the industry, the legal framework and environmental policy of industrial relevance. The environmental situation of the industry in Austria is analyzed in detail, concerning air pollution (SO 2 , NO x , CO 2 , CO, CH 4 , N 2 O, NH 3 , Pb, Cd, Hg, dioxin, furans), waste water, waste management and deposit, energy and water consumption. The state of the art in respect of the IPPC-directives (European Integrated Pollution Prevention and Control Bureau) concerning the best available techniques of the different industry sectors is outlined. The application of European laws and regulations in the Austrian industry is described. (a.n.)

The Brazilian Aerospace Industry: A Cast Study of the Technological Impact of Offset Agreements in a Recipient Industry

Science.gov (United States)

1989-12-01

sector, the most important development was the creation of the Secretaria de Tecnologia Industrial (STI) of the Ministry of Industry and Commerce (MIC...political and financial problems, Brazil’s space program, called Brazilian Complete Space Mission, Missdo Espacial Completa Brasileira - MECB, continues to...Pesquisa Espacial - INPE, also located in S&o Jos6 dos Campos’". It is responsible for the design and construction of satellites󈧼. The other activities

The Spatialities of Urban Economic Geographies: New Industrial Spaces in the Outer City of Copenhagen

DEFF Research Database (Denmark)

Hansen, Høgni Kalsø; Winther, Lars

2007-01-01

The paper focuses on the transformation of the industrial structure and the location dynamics on the edge of the metropolitan region of Copenhagen with the aim of explaining the rise of new spaces in the urban economic geography. The main concern of the paper is the role the transformation...... of the outer city plays in the urban economy of Copenhagen. The centre of attention is on the changing industrial structure, the progressively higher complexity of firm location, and the division of labour that have emerged in the past decade of growth as a result of the resurgence of the metropolitan region...... of Copenhagen. The recent changes in the economic geographies of the outer city of Copenhagen are used as a launch pad for discussing the theoretical and analytical challenges in understanding the industrial change in new urban forms....

14 CFR 399.31 - Standard industry fare level.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Standard industry fare level. 399.31... Standard industry fare level. (a) Generally. Except as set forth in paragraph (d) of this section, the standard industry fare level (“SIFL”) for coach/standard service in a market is equal to the predominant...

Lunar Industry & Research Base Concept

Science.gov (United States)

Lysenko, J.; Kaliapin, M.; Osinovyy, G.

2017-09-01

Currently, all main space industry players, such as Europe, USA, Russia, China, etc., are looking back again at the idea of Moon exploration building there a manned lunar base. Alongside with other world spacefaring nations, Yuzhnoye State Design Office with its long-time development experience, technological and intellectual potential, organized its own conceptual work on development of the Lunar Industry & Research Base. In the frames of conceptual project "Lunar Industrial & Research Base" were formed its appearance, preliminary configuration and infrastructure at different stages of operation, trajectory and flight scheme to the Moon, as well as terms of the project's realization, and main technical characteristics of the systems under development, such as space transportation system for crew and cargo delivery to lunar surface and return to Earth, standardized designs of lunar modules, lunar surface vehicles, etc. The "Lunar Industrial & Research Base" project's preliminary risk assessment has shown a high value of its overall risk due to the lack of reliable information about the Moon, technical risks, long-term development of its elements, very high financial costs and dependence on state support. This points to the fact that it is reasonable to create such a global project in cooperation with other countries. International cooperation will expand the capabilities of any nation, reduce risks and increase the success probability of automated or manned space missions. It is necessary to create and bring into operation practical mechanisms for long-term space exploration on a global scale. One of the ways to do this is to create a multinational agency which would include both state enterprises and private companies.

Benefits Awareness: Educating Industry, Finance, and the Public About Space Commercialization

Science.gov (United States)

Powers, Blake; Nall, Mark; Casas, Joseph C.; Henderson, Robin N. (Technical Monitor)

2002-01-01

For space to be truly commercialized, businesses of all sizes and types must be involved, from foundries to agricultural research initiatives. Achieving this goal, however, requires three separate but integrated educational efforts to support it. The first is to educate industry leaders about the possibilities available through such research, while dispelling some of the myths and misinformation educate the financial community about the economic benefits that result both from the research and the leveraging of private research dollars through the use of space and microgravity research. The third is to educate the public about the tangible benefits that come directly to them from such efforts, the economic benefits to national economies from same, and the other less tangible benefits that will cascade from commercial operations. Together, these steps will educate and provide the framework necessary to help advance space commercialization.

78 FR 32241 - U.S. Air Force Seeks Industry Input for National Security Space Launch Assessment

Science.gov (United States)

2013-05-29

..., seeks industry views and perspectives to inform an on-going strategic National Security Space Launch... the U.S. Government. 2. What are the critical issues that concern current and prospective launch...

Industrial energy thrift scheme. Report No. 16. Energy use in the knitting industry

Energy Technology Data Exchange (ETDEWEB)

1979-12-01

The knitting industry includes organizations concerned with hosiery, other weft knitted goods and warp-knitting and in some cases also with subsequent dyeing and finishing of knitted goods. In 1976, the industry had 116,000 employees located at approximately 600 sites, mostly in the East Midlands. The total energy consumption of the industry in 1976 was estimated to be 12,180 TJ. Sites with dyeing and finishing interests could save 15% of their energy. The major sources of savings (6%) are by recovering process heat which is currently wasted and from better process control. Other significant savings (5%) are possible from better control, maintenance and insulation of boilers and pipes. Attention to better housekeeping, to controlling draughts and to space heating generally could account for a further 3.5% saving in energy. Sites without dyeing and finishing interests could save 13% of the total energy used by this group. The most important opportunities are better control of space heating (5.5%) and better control and insulation of boilers, pipes and services (5%). These sites have fewer opportunities to recover heat from processes (2%) than where dyeing and finishing takes place but opportunities do exist.

Landscape of Industry: Transformation of (Eco Industrial Park through history

Directory of Open Access Journals (Sweden)

Archana Sharma

2013-11-01

Full Text Available The landscape of industry has been changing over time. Industry has transformed and many tangents have emerged from the sporadic home-based cottage industries to geographically scattered large manufacturing industries to co-located industrial parks to environment friendly eco-industrial parks. Curiosity about the catalysts that bring about the transformation of industrial landscape is the motivation of this article. Through the narrative on Industrial Park and the gradual shift towards Eco-Industrial Park, this article aims to shed light on the context and conditions that act as catalysts for industrial transformations, so as to serve as a reference for predicting future changes in industrial landscape.

The Emergence of New Industries in Space: An evolutionary understanding of industry emergence from a geographical perspective

DEFF Research Database (Denmark)

Tanner, Anne Nygaard

of industrial organisational economics (Porter 1980) and in evolutionary economics (Dosi 1984, Nelson, Winter 1982). Second, the paper discusses the particularity that characterizes the temporal scope of industry emergence and it is claimed that the literature often lack attention to periods that precede......, which has characterized the field of economic geography. In particular, the framework builds on a critique of the predominant role previous theories have ascribed to chance events....

West African Journal of Industrial and Academic Research

African Journals Online (AJOL)

... communications, state-of-the-art developments in Information and communications technology, ... physics, industrial electronics, management sciences and engineering, industry chemistry, general technology rocketry, space and ... application of communications and information technology to these fields of importance.

Industry

Energy Technology Data Exchange (ETDEWEB)

Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

2007-12-01

This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

Dutch industry, smart(est) industry

NARCIS (Netherlands)

Sol, E.J.; Steinbuch, M.; Keulen, F. van; Houten, F.J.A.M.; Horst, T.J.J. van der

2015-01-01

Digitalisering verandert onze samenleving. De combinatie van opkomende technologieën, zoals het Internet, micro-sensoren, 3D-printing en big data maakt volledig nieuwe producten en diensten mogelijk. In de industrie wordt niet voor niets gesproken over een vierde industriële revolutie. Het is voor

Integrating Efficiency of Industry Processes and Practices Alongside Technology Effectiveness in Space Transportation Cost Modeling and Analysis

Science.gov (United States)

Zapata, Edgar

2012-01-01

This paper presents past and current work in dealing with indirect industry and NASA costs when providing cost estimation or analysis for NASA projects and programs. Indirect costs, when defined as those costs in a project removed from the actual hardware or software hands-on labor; makes up most of the costs of today's complex large scale NASA space/industry projects. This appears to be the case across phases from research into development into production and into the operation of the system. Space transportation is the case of interest here. Modeling and cost estimation as a process rather than a product will be emphasized. Analysis as a series of belief systems in play among decision makers and decision factors will also be emphasized to provide context.

Commercial Lunar ISRU for the Space Launch Industry: Cruder is Better

Science.gov (United States)

Turner, M.

2017-09-01

Lunar ISRU scenarios typically focus on making relatively high-added-value products (such as solar PVs) for off-Earth use only. Discussion of space mining in general focuses on high-value trace substances (e.g. platinum group metals) as exports to Earth, and hydroxyls and other volatiles for use only in space. This paper considers two potential bulk commodities with high availability on the lunar surface: space-weathered basalt fines and the oxygen in metal oxides. Basalt fiber can be produced by a simple process, and is strong enough that a tapered rotating sling could propel payloads at lunar escape velocity. Basalt aerobrakes could be flung to LEO depots to aid in aerocapture, reentry, and thermal protection of upper stages. Lunar oxygen (O2 being most of the mass of most liquid-fueled rockets) could aid in powered descent. In short, abundant substances on the Moon could make cost-saving exports possible sooner than later, for the satellite launch industry.

Differential Globalization of Industry- and Non-Industry-Sponsored Clinical Trials.

Science.gov (United States)

Atal, Ignacio; Trinquart, Ludovic; Porcher, Raphaël; Ravaud, Philippe

2015-01-01

Mapping the international landscape of clinical trials may inform global health research governance, but no large-scale data are available. Industry or non-industry sponsorship may have a major influence in this mapping. We aimed to map the global landscape of industry- and non-industry-sponsored clinical trials and its evolution over time. We analyzed clinical trials initiated between 2006 and 2013 and registered in the WHO International Clinical Trials Registry Platform (ICTRP). We mapped single-country and international trials by World Bank's income groups and by sponsorship (industry- vs. non- industry), including its evolution over time from 2006 to 2012. We identified clusters of countries that collaborated significantly more than expected in industry- and non-industry-sponsored international trials. 119,679 clinical trials conducted in 177 countries were analysed. The median number of trials per million inhabitants in high-income countries was 100 times that in low-income countries (116.0 vs. 1.1). Industry sponsors were involved in three times more trials per million inhabitants than non-industry sponsors in high-income countries (75.0 vs. 24.5) and in ten times fewer trials in low- income countries (0.08 vs. 1.08). Among industry- and non-industry-sponsored trials, 30.3% and 3.2% were international, respectively. In the industry-sponsored network of collaboration, Eastern European and South American countries collaborated more than expected; in the non-industry-sponsored network, collaboration among Scandinavian countries was overrepresented. Industry-sponsored international trials became more inter-continental with time between 2006 and 2012 (from 54.8% to 67.3%) as compared with non-industry-sponsored trials (from 42.4% to 37.2%). Based on trials registered in the WHO ICTRP we documented a substantial gap between the globalization of industry- and non-industry-sponsored clinical research. Only 3% of academic trials but 30% of industry trials are

The making and remaking of dismissed industrial sites

NARCIS (Netherlands)

Curulli, G.I.

2014-01-01

The Making and Remaking of Dismissed Industrial Sites examines the transformation of former industrial areas and the implications of the design of reuse with aesthetics, context, history and memory, public space and reclamation of contaminated soils. Through a critical investigation of these

Providing Public Space Continuities in Post-Industrial Areas through Remodelling Land/Water Connections

Science.gov (United States)

Burda, Izabela M.; Nyka, Lucyna

2017-10-01

This article examines the problem of urban transformation strategies applied in recent years which are based on the creation of new water areas and modification of existing ones. The research is an attempt to prove that modifications of plans of water areas and forms of their borders may play an important role in achieving the best quality public spaces in post-industrial territories. The basis for demonstrating the importance of modifying water borders, and introducing new forms of water-based structures in cities, are theoretical surveys, comparative studies and in-field analyses. It can be seen that post-industrial areas, which used to create voids in the urban fabric, can be perceived as unique but isolated places that should be integrated into the layout of cities. Thus, creating continuity of public spaces that will relate converted areas to their surroundings is a well-known objective of many transformation strategies. This research proves that an effective strategy toward achieving this goal can be based on the modification of relationships between land and water. Namely, the introduction of new water areas, designing new pieces of land that protrude into the water, softening the boundaries of water lines or the opposite, like structuring smaller water flows into well-defined canals, may significantly contribute to the quality of public spaces. As such, all of this fosters the development of sustainable cities and contributes significantly to the emergence of high-quality urban landscapes.

Industrial chemistry engineering

International Nuclear Information System (INIS)

1993-01-01

This book on industrial chemistry engineering is divided in two parts. The first part deals with industrial chemistry, inorganic industrial chemistry, organic industrial chemistry, analytical chemistry and practical questions. The last parts explain the chemical industry, a unit parts and thermodynamics in chemical industry and reference. It reveals the test subjects for the industrial chemistry engineering with a written examination and practical skill.

ECO INDUSTRIAL STATE

Directory of Open Access Journals (Sweden)

Mariana López Pascual

2015-06-01

The facades will become aesthetically pleasing for the public space or such with the installation of a new technology of a photovoltaic-glass with transparency that can be used for windows or displays. A social program of artistic murals will accompany this with the aim for awareness on environmental protection. This is a project seeks to intervene in the public space, inviting the private sector for the economic investment and nurture to gives neighbours and all Barcelona's citizens a new and attractive image of this Industrial State

Productivity improvement through industrial engineering in the semiconductor industry

Science.gov (United States)

Meyersdorf, Doron

1996-09-01

Industrial Engineering is fairly new to the semiconductor industry, though the awareness to its importance has increased in recent years. The US semiconductor industry in particular has come to the realization that in order to remain competitive in the global market it must take the lead not only in product development but also in manufacturing. Industrial engineering techniques offer one ofthe most effective strategies for achieving manufacturing excellence. Industrial engineers play an important role in the success of the manufacturing facility. This paper defines the Industrial engineers role in the IC facility, set the visions of excellence in semiconductor manufacturing and highlights 10 roadblocks on the journey towards manufacturing excellence.

Waste Management in Industrial Construction: Investigating Contributions from Industrial Ecology

Directory of Open Access Journals (Sweden)

Larissa A. R. U. Freitas

2017-07-01

Full Text Available The need for effective construction waste management is growing in importance, due to the increasing generation of construction waste and to its adverse impacts on the environment. However, despite the numerous studies on construction waste management, recovery of construction waste through Industrial Symbiosis and the adoption of other inter-firm practices, comprised within Industrial Ecology field of study, have not been fully explored. The present research aims to investigate Industrial Ecology contributions to waste management in industrial construction. The waste management strategies adopted in two industrial construction projects in Brazil are analyzed. The main waste streams generated are identified, recycling and landfilling diversion rates are presented and waste recovery through Industrial Symbiosis is discussed. A SWOT analysis was carried out. Results demonstrate that 9% of the waste produced in one of the projects was recovered through Industrial Symbiosis, while in the other project, waste recovery through Industrial Symbiosis achieved the rate of 30%. These data reveal Industrial Symbiosis’ potential to reduce landfilling of industrial construction wastes, contributing to waste recovery in construction. In addition, results show that industrial construction projects can benefit from the following synergies common in Industrial Ecology place-based approaches: centralized waste management service, shared waste management infrastructure and administrative simplification.

A sustainable approach for industrial area redevelopment in the Netherlands

NARCIS (Netherlands)

Blokhuis, E.G.J.; Schaefer, W.F.; Kungolos, A.; Brebbia, C.A.; Beriatos, E.

2007-01-01

According to the Dutch Ministry of Economic Affairs, creating space for industrial areas is necessary to realize a sustainable economic growth. Currently, the average time needed to redevelop an industrial area in the Netherlands is 10 years. Furthermore, almost 30% of the Dutch stock of industrial

Mining space and industrial heritage in Mexico: the mineral from Tlalpujahua [Michoacán state

Directory of Open Access Journals (Sweden)

José Alfredo Uribe Salas

2014-12-01

Full Text Available This paper deals with the historical dimension of the economic and social space of Tlalpujahua and El Oro Mining District from the perspective of the Industrial Heritage. The exploration and exploitation in search for precious minerals along the sixteenth to the twentieth centuries articulated a culture of wage labour and facilitated the circulation of new knowledge, technical expertise and an impressive technological innovation in the late nineteenth and early twentieth centuries. With the depletion of gold and silver in the mid-twentieth century, the socio-technical framework disappears but not the memory and industrial vestiges which represents long-term historical processes, and as a social laboratory allows to recognize and analyze the changes in the social relations of different human groups, different nationality and social status — workers, technicians, engineers, businessmen, traders, etc. —, who moved to the minerals in the quest to materialise their own life expectancy. The study and appreciation of the historical and cultural experience ensures the memory of the industrial heritage of Mexicans.

High Pressure Industrial Water Facility

Science.gov (United States)

1992-01-01

In conjunction with Space Shuttle Main Engine testing at Stennis, the Nordberg Water Pumps at the High Pressure Industrial Water Facility provide water for cooling the flame deflectors at the test stands during test firings.

West African Journal of Industrial and Academic Research: Editorial ...

African Journals Online (AJOL)

... communications, state-of-the-art developments in Information and communications technology, ... physics, industrial electronics, management sciences and engineering, industry chemistry, general technology rocketry, space and ... application of communications and information technology to these fields of importance.

From a Music Industry to Sound Industries

OpenAIRE

Thor Magnusson

2013-01-01

Commodification has been an inherent aspect of music for many centuries. The aggregation of the diverse commodification practices could be described as an "industry," but this is an industry that has always been in a state of transition. New technologies, media formats, and practices appear regularly, requiring swift responses by the incumbent music industry. Although periods of relative stabil- ity have existed, where economic structures become established, the field has always been ch...

Performance evaluation of the conventional Brazilian industries radiation protection in the small industrial gauges and industrial radiography areas

International Nuclear Information System (INIS)

Santos, Joyra Amaral dos

1999-08-01

This works evaluates by punctuation the performance in conventional Brazilian industries radiation protection area which make use of small industrial gauges and industrial radiography. It proposes, procedures for industry self-evaluation, besides a new radiation protection plans pattern for the small industrial gauges area. The data source where inspection reports of Dosimetry Radiation Protection Institute/Nuclear Energy Commission conventional Brazilian industries' radiation protection plans, beyond visitation to the inspection place. The performance evaluation has been realized both in the administrative and operational aspects of the industries. About of 60% of the industries have a satisfactory register control which does not happen to the operational control. The performance evaluation advantage is that industries may self-evaluate, foreseeing Dosimetry Radiation Protection Institute's regulation inspections, correcting its irregularities, automatically improving its services. The number of industries which have obtained satisfactory performance in both areas is below 70%, both in administrative and operational aspects. Such number can be considered a low one as it is radiation protection. The procedures propose in this work aim to improve such a situation. (author)

Industrial electrification

International Nuclear Information System (INIS)

Melvin, J.G.

1983-03-01

The technical and economic scope for industrial process electrification in Canada is assessed in the light of increasing costs of combustion fuels relative to electricity. It is concluded that electricity is capable of providing an increasing share of industrial energy, eventually aproaching 100 percent. The relatively low cost of electricity in Canada offers industry the opportunity of a head start in process electrification with consequent advantages in world markets both for industrial products and for electrical process equipment and technology. A method is described to promote the necessary innovation by providing access to technology and financing. The potential growth of electricity demand due to industrial electrification is estimated

Determinant factors of industrial symbiosis: greening Pasir Gudang industrial park

Science.gov (United States)

Teh, B. T.; Ho, C. S.; Matsuoka, Y.; Chau, L. W.; Gomi, K.

2014-02-01

Green industry has been identified as an important element in attaining greater sustainability. It calls for harmonizing robust economic growth with environment protection. Industries, particularly in developing and transitional nations such as Malaysia, are in need of a reform. Many experts and international organizations suggest the concept of industrial symbiosis. Mainly, there are successful cases of industrial symbiosis practices around the world. However, there are numerous cases of failure too. As industrial symbiosis is an emerging new approach, with a short history of two decades, a lot of researches are generally focused on narrow context and technical details. There is a lack of concerted efforts to look into the drivers and barriers of industrial symbiosis across different cases. This paper aims to examine the factors influencing the development of industrial symbiosis from various countries to supports such networks to evolve in Pasir Gudang. The findings show institution, law and regulation, finance, awareness and capacity building, technology, research and development, information, collaboration, market, geography proximity, environmental issues and industry structure affect the formation of industrial symbiosis.

Determinant factors of industrial symbiosis: greening Pasir Gudang industrial park

International Nuclear Information System (INIS)

Teh, B T; Ho, C S; Chau, L W; Matsuoka, Y; Gomi, K

2014-01-01

Green industry has been identified as an important element in attaining greater sustainability. It calls for harmonizing robust economic growth with environment protection. Industries, particularly in developing and transitional nations such as Malaysia, are in need of a reform. Many experts and international organizations suggest the concept of industrial symbiosis. Mainly, there are successful cases of industrial symbiosis practices around the world. However, there are numerous cases of failure too. As industrial symbiosis is an emerging new approach, with a short history of two decades, a lot of researches are generally focused on narrow context and technical details. There is a lack of concerted efforts to look into the drivers and barriers of industrial symbiosis across different cases. This paper aims to examine the factors influencing the development of industrial symbiosis from various countries to supports such networks to evolve in Pasir Gudang. The findings show institution, law and regulation, finance, awareness and capacity building, technology, research and development, information, collaboration, market, geography proximity, environmental issues and industry structure affect the formation of industrial symbiosis

Industrial Electrostatic-Gecko Gripper, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Perception Robotics is developing an innovative product, the Electrostatic Gecko Gripper? (ESG Gripper), for the industrial automation market. This unique gripping...

Industrial Electrostatic-Gecko Gripper, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Perception Robotics is developing an innovative product, the "Electrostatic Gecko Gripper" (ESG Gripper), for the industrial automation market. This unique gripping...

Towards preventative eco-industrial development: an industrial and urban symbiosis case in one typical industrial city in China

DEFF Research Database (Denmark)

Dong, Liang; Fujita, Tsuyoshi; Dai, Ming

2016-01-01

situation. In order to investigate the eco-benefits of eco-industrial development in China, this study focused on an industrial and urban symbiosis case of Guiyang city in which process synergy, municipal solid wastes recycling and waste energy utilization were incorporated in this typical industrial city...... policy implications to address the barriers of promoting industrial and urban symbiosis were proposed. This study is critical for future industrial and urban planning policy making and shed a light on innovative eco-industrial development in China....

Safety Criteria for the Private Spaceflight Industry

Science.gov (United States)

Quinn, Andy; Maropoulos, Paul

2010-09-01

The Federal Aviation Administration(FAA) Office of Commercial Space Transportation(AST) has set specific rules and generic guidelines to cover experimental and operational flights by industry forerunners such as Virgin Galactic and XCOR. One such guideline Advisory Circular(AC) 437.55-1[1] contains exemplar hazard analyses for spacecraft designers and operators to follow under an experimental permit. The FAA’s rules and guidelines have also been ratified in a report to the United States Congress, Analysis of Human Space Flight Safety[2] which cites that the industry is too immature and has ‘insufficient data’ to be proscriptive and that ‘defining a minimum set of criteria for human spaceflight service providers is potentially problematic’ in order not to ‘stifle the emerging industry’. The authors of this paper acknowledge the immaturity of the industry and discuss the problematic issues that Design Organisations and Operators now face.

EVALUASI BEBAN FISIOLOGIS PADA INDUSTRI MANUFAKTUR (INDUSTRI PEMBUATAN KOMPONEN PESAWAT TERBANG DAN INDUSTRI SEPATU

Directory of Open Access Journals (Sweden)

Donny Richardo Sitohang

2012-02-01

Full Text Available Studi ini meneliti beban fisiologis yang dialami pekerja pada industri manufaktur, tepatnya pada industri pembuatan komponen pesawat terbang dan industri pembuatan sepatu. Pada industri pembuatan komponen pesawat terbang pekerjaan yang akan diteliti beban fisiologisnya adalah pekerjaan assembly, machining,dan metal forming. Untuk industri sepatu pekerjaan yang akan diamati adalah pekerjaan pola, jahit dan potong. Penelitian ini melibatkan 10 orang responden pada setiap jenis pekerjaan. Pada industri pembuatan komponen pesawat terbang nilai rata-rata denyut jantung kerja untuk pekerjaan assembly adalah sebesar 82.9±7,1 denyut/menit, untuk pekerjaan machining sebesar 79.9±9,5 denyut/menit, dan untuk pekerjaan metal forming sebesar 88,8 ±11,2  denyut/menit. Nilai rata-rata konsumsi oksigen relatif pada pekerjaan assembly adalah sebesar 20,8±4%, pekerjaan machining 23,1±5%, dan pekerjaan metal forming 26,4 ± 8%. Sedangkan pada industri pembuatan sepatu nilai denyut jantung kerja rata-rata untuk pekerjaan pola adalah 82±5,3 denyut/menit, pekerjaan jahit 84,5±6,1 denyut/menit, dan pekerjaan potong 88,4±11,5 denyut/menit. Nilai rata-rata konsumsi oksigen relatif pada pekerjaan pola adalah sebesar 15,8±5%, pekerjaan jahit 15,9±4%, dan pekerjaan potong 18±7%. Secara umum intensitas beban kerja fisik pada aktivitas yang diteliti baik pada industri pembuatan komponen pesawat terbang maupun industri pembuatan sepatu bersifat ringan dan masih berada dalam batas yang direkomendasikan. Kata kunci : Beban kerja fisiologis, Konsumsi Oksigen, Denyut Jantung, Skala Borg       Generally, the purpose of this study is to evaluate work physical capacity of Indonesian Aerospace production division operators and shoe industry operators. In this study, physiological workloads were evaluated in assembly, machining, and metal forming tasks (Indonesian Aerospace pattern making activity, sewing, and cutting (shoe industry using three indicators (heart rate

Industrial garnet

Science.gov (United States)

Olson, D.W.

2000-01-01

The state of the global industrial garnet industry in 1999 is discussed. Industrial garnet mined in the U.S., which accounts for approximately one-third of the world's total, is usually a solid-solution of almandine and pyrope. The U.S. is the largest consumer of industrial garnet, using an estimated 47,800 st in 1999 as an abrasive and as a filtration medium in the petroleum industry, filtration plants, aircraft and motor vehicle manufacture, shipbuilding, wood furniture finishing operations, electronic component manufacture, ceramics manufacture, and glass production. Prices for crude concentrates ranged from approximately $50 to $110/st and refined garnet from $50 to $215/st in 1999, depending on type, source, quantity purchased, quality, and application.

Fundamentals and applications of neutron imaging. Application part 3. Application of neutron imaging in aircraft, space rocket, car and gunpowder industries

International Nuclear Information System (INIS)

Ikeda, Yasushi

2007-01-01

Neutron imaging is applied to nondestructive test. Four neutron imaging facilities are used in Japan. The application examples of industries are listed in the table: space rocket, aircraft, car, liquid metal, and works of art. Neutron imaging of transportation equipments are illustrated as an application to industry. X-ray radiography testing (XRT) image and neutron radiography testing (NRT) image of turbine blade of aircraft engine, honeycomb structure of aircraft, helicopter rotor blade, trigger tube, separation nut of space rocket, carburetor of car, BMW engine, fireworks and ammunitions are illustrated. (S.Y.)

Methods for converting industrial zones

Science.gov (United States)

Talipova, L.; Kosyakov, E.; Polyakova, Irina

2017-10-01

In this article, industrial zones of Saint Petersburg and Hong Kong were considered. Competitive projects aimed at developing the grey belt of Saint Petersburg were considered. The methodology of the survey of reconstruction of the industrial zone of Hong Kong is also analyzed. The potential of the city’s grey belt lies in its location on the border of the city’s historical centre. Rational use of this potential will make it possible to achieve numerous objectives, including development of the city’s transport infrastructure, positioning of business functions, and organization of housing and the city’s system of green public spaces.

Industrial Physics---Southern California Style

Science.gov (United States)

Leslie, Stuart

2013-03-01

Only in Southern California did space-age style really come into its own as a unique expression of Cold War scientific culture. The corporate campuses of General Atomic in San Diego and North American Aviation in Los Angeles perfectly expressed the exhilarating spirit of Southern California's aerospace era, scaling up the residential version of California modernism to industrial proportion. Architects William Pereira and A.C. Martin Jr., in collaboration with their scientific counterparts, fashioned military-industrial `dream factories' for industrial physics that embodied the secret side of the space-age zeitgeist, one the public could only glimpse of in photographs, advertisements, and carefully staged open houses. These laboratories served up archetypes of the California dream for a select audience of scientists, engineers, and military officers, live-action commercials for a lifestyle intended to lure the best and brightest to Southern California. Paradoxically, they hid in plain sight, in the midst of aerospace suburbs, an open secret, at once visible and opaque, the public face of an otherwise invisible empire. Now, at the end of the aerospace era, these places have become an endangered species, difficult to repurpose, on valuable if sometimes highly polluted land. Yet they offer an important reminder of a more confident time when many physicists set their sights on the stars.

The metalcasting industry and future research on the International Space Station

International Nuclear Information System (INIS)

Santner, Joe; Overfelt, Tony

2000-01-01

Fourteen million tons of castings are used annually in ninety percent of all manufactured goods and in all manufacturing machinery making metalcasting the manufacturing backbone of America. There are approximately 3,000 foundries located in 49 states directly providing employment to 200,000 people and indirectly supporting transportation, petrochemical, construction, and other end-user industries. The Solidification Design Center (SDC) began a pioneering effort to address metalcasting industry technical needs to maintain US global leadership in quality, price, and delivery. While individual companies have interacted in the past with the Auburn University SDC, eighty-percent of the foundries employ less than 100 individuals while only six-percent of the foundries employ more than 250 persons. The American Foundrymen's Society (AFS) formed the Solidification Design and Control Consortium to reach the small businesses in the U.S. metalcasting industry. Over a century of operation has proved the AFS committee structure to be a robust management tool. The recognized metalcasting industry technical needs and the unique opportunities that low earth orbit offers foundry process research are described in the present paper. In addition, the metalcasting approach to prioritize proposals, transfer technology developed within the small business community, and the metalcasting industry concerns regarding working with a government aerospace program are also discussed

Industrialized Innovation: The Connection of Science & Technology Innovation with Industrial Innovation

Institute of Scientific and Technical Information of China (English)

Yinxing Hong; Yao Lu; Jianghuai Zheng

2017-01-01

In light of the relationship and the current disconnection between science & technology (S&T) innovation and industrial innovation in China,it is necessary to put forward and emphasize the concept of industrialized innovation.Industrialized innovation is the bridge and intermediation between S&T innovation and industrial innovation,which is not only a concept,but also a mechanism and combination force.There are two ways to achieve industrialized innovation:through industry-university-research coordination and through technology entrepreneurship.The meaning of industry-university-research coordination is not about coordination among industry,university and research sectors in an institutional sense;rather it is about the coordination of the functions of cultivation and development in new industries,new technologies,and new talents of industrialized innovation.The incentive mechanism for industrialized innovation should motivate not only innovation but also coordination.Technology entrepreneurship is the industrialization of new technology through business start-ups,which occurs beyond the stage of incubation and development of new technology.The capital of technology entrepreneurship is the set consisting of knowledge capital manifested through technological innovation,human capital manifested through entrepreneurs,and physical capital in the form of venture capital.While physical capital is indispensable,knowledge capital and human capital play the decisive role in technology entrepreneurship.The industrialization of technological innovation involves two requirements:one is to enable the new technology industry to achieve a large scale rapidly,and the other is to fully realize the potential value of the new technology.Both requirements are reliant on effective innovation in business models.

Space Industry. Industry Study, Spring 2009

Science.gov (United States)

2009-01-01

Space Flight Center, Cocoa Beach, FL Cape Canaveral Air Force Station, Cocoa Beach, FL Naval Ordnance Test Unit, Cocoa Beach, FL 50th Space Wing... America .” In 2009, as we celebrate the 40th anniversary of the fulfillment of that vision, it is appropriate to pause and reflect on how far we...value system, providing high-value services to both government and commercial consumers. The estimate of international and U.S. government consumption

University of Central Florida / Deep Space Industries Asteroid Regolith Simulants

Science.gov (United States)

Britt, Daniel; Covey, Steven D.; Schultz, Cody

2017-10-01

Introduction: The University of Central Florida (UCF), in partnership with Deep Space Industries (DSI) are working under a NASA Phase 2 SBIR contract to develop and produce a family of asteroid regolith simulants for use in research, engineering, and mission operations testing. We base simulant formulas on the mineralogy, particle size, and physical characteristics of CI, CR, CM, C2, CV, and L-Chondrite meteorites. The advantage in simulating meteorites is that the vast majority of meteoritic materials are common rock forming minerals that are available in commercial quantities. While formulas are guided by the meteorites our approach is one of constrained maximization under the limitations of safety, cost, source materials, and ease of handling. In all cases our goal is to deliver a safe, high fidelity analog at moderate cost.Source Materials, Safety, and Biohazards: A critical factor in any useful simulant is to minimize handling risks for biohazards or toxicity. All the terrestrial materials proposed for these simulants were reviewed for potential toxicity. Of particular interest is the organic component of volatile rich carbonaceous chondrites which contain polycyclic aromatic hydrocarbons (PAHs), some of which are known carcinogens and mutagens. Our research suggests that we can maintain rough chemical fidelity by substituting much safer sub-bituminous coal as our organic analog. A second safety consideration is the choice of serpentine group materials. While most serpentine polymorphs are quite safe we avoid fibrous chrysotile because of its asbestos content. Terrestrial materials identified as inputs for our simulants are common rock forming minerals that are available in commercial quantities. These include olivine, pyroxene, plagioclase feldspar, smectite, serpentine, saponite, pyrite, and magnetite in amounts that are appropriate for each type. For CI's and CR’s, their olivines tend to be Fo100 which is rare on Earth. We have substituted Fo90 olivine

Financial risk of the biotech industry versus the pharmaceutical industry.

Science.gov (United States)

Golec, Joseph; Vernon, John A

2009-01-01

The biotech industry now accounts for a substantial and growing proportion of total R&D spending on new medicines. However, compared with the pharmaceutical industry, the biotech industry is financially fragile. This article illustrates the financial fragility of the biotech and pharmaceutical industries in the US and the implications of this fragility for the effects that government regulation could have on biotech firms. Graphical analysis and statistical tests were used to show how the biotech industry differs from the pharmaceutical industry. The two industries' characteristics were measured and compared, along with various measures of firms' financial risk and sensitivity to government regulation. Data from firms' financial statements provided accounting-based measures and firms' stock returns applied to a multifactor asset pricing model provided financial market measures. The biotech industry was by far the most research-intensive industry in the US, averaging 38% R&D intensity (ratio of R&D spending to total firm assets) over the past 25 years, compared with an average of 25% for the pharmaceutical industry and 3% for all other industries. Biotech firms exhibited lower and more volatile profits and higher market-related and size-related risk, and they suffered more negative stock returns in response to threatened government price regulation. Biotech firms' financial risks increase their costs of capital and make them more sensitive to government regulations that affect their financial prospects. As biotech products grow to represent a larger share of new medicines, general stock market conditions and government regulations could have a greater impact on the level of innovation of new medicines.

STERN-Educational Benefits for the Space Industry

Science.gov (United States)

Schuttauf, K.; Stamminger, A.; Lappohn, K.; Ciezki, H.; Kitsche, W.

2015-09-01

several reviews in which they have to present and defend their rocket design in front of experts. This practically oriented study should prepare the students for life in industry. The DLR Mobile Rocket Base (MORABA) and the DLR Institute of Space Propulsion as well as the DLR Space Administration, accompany the students during the reviews and until launch. MORABA has five decades of experience in launching sounding rockets and the Space Propulsion Institute in testing of and research in rocket engines. The reviews as well as special workshops (organized by DLR MORABA and the DLR Institute of Space Propulsion), offer a platform for exchange of technical information. The STERN project provides an opportunity to train the next generation of aerospace engineers.

Industrial relationships and nationalisation in the South Wales coalmining industry

Energy Technology Data Exchange (ETDEWEB)

Zweiniger-Bargielowska, I.-M. (University of Cambridge, Cambridge (United Kingdom))

1990-01-01

The thesis examines industrial relationships in the South Wales coal mining industry at a colliery level. Various industrial relations stereotypes in the industry and the effect of nationalization on them are examined. The study concentrates on the collieries rather than the communities, comparing four collieries. Colliery managers, underofficials and mineworkers are studied, both in themselves and in relation to each other. Insights are gained into the causes of conflict within the industry. It is concluded that the ownership of the industry is not a major determinant of the level of conflict. It is suggested that many established views on the mining work force and attitudes to nationalization, work and unions need reassessing.

International Co-operation: Industrialized and Industrializing Countries

International Nuclear Information System (INIS)

Khatib, H.

1996-01-01

Industrializing Countries are becoming increasingly important in the fossil fuels market. In their endeavour for development these countries need to be assisted by the industrialized countries in various problems of provision of capital, capacity building, technology transfer and protection to the environment. (author)

The Computer Industry. High Technology Industries: Profiles and Outlooks.

Science.gov (United States)

International Trade Administration (DOC), Washington, DC.

A series of meetings was held to assess future problems in United States high technology, particularly in the fields of robotics, computers, semiconductors, and telecommunications. This report, which focuses on the computer industry, includes a profile of this industry and the papers presented by industry speakers during the meetings. The profile…

Assessment of industrial liquid waste management in Omdurman Industrial Area

International Nuclear Information System (INIS)

Elnasri, R. A. A.

2003-04-01

This study was conducted mainly to investigate the effects of industrial liquid waste on the environment in the Omdurman area. Various types of industries are found around Omdurman. According to the ISC the major industries are divided into eight major sub-sectors, each sub-sector is divided into types of industries. Special consideration was given to the liquid waste because of its effects. In addition to the available data, personal observation supported by photographs, laboratory analyses were carried on the industrial effluents. The investigated parameters in the analysis were, BOD, COD, O and G, Cr, TDS, TSS, pH, temp and conductivity. Interviews were conducted with waste handling workers in the industries, in order to assess the effects of industrial pollution. The results obtained showed that pollutants produced by all the factories were found to exceed the accepted levels of the industrial pollution control. The effluents disposed of in the sites allotted by municipal authorities have adverse effects on the surrounding environment and public health and amenities. Accordingly the study recommends that the waste water must be pretreated before being disposed of in site allotted by municipal authorities. Develop an appropriate system for industrial waste proper management. The study established the need to construct a sewage system in the area in order to minimize the pollutants from effluents. (Author)

Assessment of industrial liquid waste management in Omdurman Industrial Area

Energy Technology Data Exchange (ETDEWEB)

Elnasri, R A. A. [Institute of Environmental Studies, University of Khartoum, Khartoum (Sudan)

2003-04-15

This study was conducted mainly to investigate the effects of industrial liquid waste on the environment in the Omdurman area. Various types of industries are found around Omdurman. According to the ISC the major industries are divided into eight major sub-sectors, each sub-sector is divided into types of industries. Special consideration was given to the liquid waste because of its effects. In addition to the available data, personal observation supported by photographs, laboratory analyses were carried on the industrial effluents. The investigated parameters in the analysis were, BOD, COD, O and G, Cr, TDS, TSS, pH, temp and conductivity. Interviews were conducted with waste handling workers in the industries, in order to assess the effects of industrial pollution. The results obtained showed that pollutants produced by all the factories were found to exceed the accepted levels of the industrial pollution control. The effluents disposed of in the sites allotted by municipal authorities have adverse effects on the surrounding environment and public health and amenities. Accordingly the study recommends that the waste water must be pretreated before being disposed of in site allotted by municipal authorities. Develop an appropriate system for industrial waste proper management. The study established the need to construct a sewage system in the area in order to minimize the pollutants from effluents. (Author)

Industrial zones and Arab industrialization in Israel

NARCIS (Netherlands)

Sofer, Michael; Schnell, Izhak; Drori, Israel

1996-01-01

Since the 1970s there has been increased integration of the Arab sector into the Israeli economy. This integration has been characterized by the increase in industrial entrepreneurship in the Arab settlements. Critical to the industrialization process are factors related to the availability of

Petroleum industry 1996; L`industrie petroliere 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

A survey on petroleum industry activities in France and in the world in 1996 is presented. The different parts and themes of the study are: evolution of the petroleum market (international and French markets, supply and demand, prices, mark-up and taxation in France and in Europe); activities in the petroleum industries (exploration and production, maritime transportation, inland transportation and storage, refining, quality of petroleum products and substitution fuels, oil distribution); environment and safety (refining, distribution and evolution of products, pipeline and maritime transportation, exploration and production); situation of the sector`s companies (oil groups, para-petroleum French industry, scientific and technical research)

Petroleum industry 1996; L`industrie petroliere 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

A survey on petroleum industry activities in France and in the world in 1996 is presented. The different parts and themes of the study are: evolution of the petroleum market (international and French markets, supply and demand, prices, mark-up and taxation in France and in Europe); activities in the petroleum industries (exploration and production, maritime transportation, inland transportation and storage, refining, quality of petroleum products and substitution fuels, oil distribution); environment and safety (refining, distribution and evolution of products, pipeline and maritime transportation, exploration and production); situation of the sector`s companies (oil groups, para-petroleum French industry, scientific and technical research)

Industrial Waste

DEFF Research Database (Denmark)

Christensen, Thomas Højlund

2011-01-01

generation rates and material composition as well as determining factors are discussed in this chapter. Characterizing industrial waste is faced with the problem that often only a part of the waste is handled in the municipal waste system, where information is easily accessible. In addition part...... of the industrial waste may in periods, depending on market opportunities and prices, be traded as secondary rawmaterials. Production-specificwaste from primary production, for example steel slag, is not included in the current presentation. In some countries industries must be approved or licensed and as part...... of the system industry has to inform at the planning stage and afterwards in yearly reports on their waste arising and how the waste is managed. If available such information is very helpful in obtaining information about that specific industry. However, in many countries there is very little information...

Industry evolution in developing countries : the Indonesian pulp and paper industry

NARCIS (Netherlands)

Dijk, van M.

2003-01-01

Almost all empirical research on industry evolution has been conducted on high or medium technology industries in industrialised countries. In this paper, a detailed analysis of the life cycle of Indonesia's pulp and paper industry is presented as case study to investigate industry evolution in

The industrial policy experience of the electronics industry in Malaysia

OpenAIRE

Rasiah, Rajah

2015-01-01

Despite the use of industrial policies to stimulate economic growth by several successful developers, latecomers have faced mixed experiences. Hence, this paper analyses the industrial policy experience of the electronics industry in Malaysia. A blend of institutions have guided technological upgrading in the industry, especially in the state of Penang. Smooth co-ordination between the state government, multinational corporations, national firms, and the federal government helped stimulate te...

Environmental problems in Russian coal industry

International Nuclear Information System (INIS)

Kharchenko, V.; Oumnov, V.

1996-01-01

The state of the Russian coal industry is complicated both economically and environmentally. Most mines are unprofitable. Several coal mines are intended to be closed. So, under existing conditions, coal mines are unable to give much attention to environmental protection problems. At the same time, coal mining is one of the most polluting industries. The main trends in this industry's negative influence upon the environment are: land spoilage and immobilization to lay out open-pit mines and mineral waste dump areas and tailing piles as well as with industrial waste water runoff; atmospheric pollution with the air coming from underground and substances blown off from dumps, hydrogeological regime intervention in coal mining areas, etc. One way to solve environmental problems in coal mining is a more rational utilization of the accompanying natural coal resources. Such measures make it possible to obtain complementary profits not only at the expense of reducing environmental destruction but producing new kinds of goods or services as well. Examples of similar solutions are solid mineral wastes utilization, underground space utilization, coal gas utilization and other issues

Industrial recovered-materials-utilization targets for the textile-mill-products industry

Energy Technology Data Exchange (ETDEWEB)

None

1979-01-01

The Congress, in the National Energy Conservation and Policy Act of 1978 (NECPA), directed the Department of Energy to establish materials recovery targets for the metals and metal products, paper and allied products, rubber, and textile-mill-products industries. The targets were developed to provide incentives for using energy-saving recorded materials and to provied a yardstick for measuring progress and improvement in this endeavor. The NECPA indicates that the targets should represent the maximum technically and economically feasible increase in the use of energy-saving recovered materials that each industry can achieve progressively by January 1, 1987. Materials affected by recovered-materials targets include and are limited to aluminum, copper, lead, zinc, iron, steel, paper and associated products, textile-mill, products, and rubber. Using information gathered from the textile-mill-products industry and from other textile-relaed sources, DOE has developed recovered materials targets for that industry. This report presents those targets and their basis and justification. Following an overview of the textile industry, the chapters are: Textile-Mill-Products Industry Operations; Economic Analysis of the Textile-Mill-Products Industry; Governmental and Regulatory Influence on the US Textile Industry; Current Mill Use of Recovered Materials in the Textile-Mill-Products Industry; Limitations on the Use of Recovered Materials in the US Textile-Mill-Products Industry; Materials-Recovery Targets; and Government and Industry Actions That Could Increase the Use of Recovered Materials.

Pharmacist-industry relationships.

Science.gov (United States)

Saavedra, Keene; O'Connor, Bonnie; Fugh-Berman, Adriane

2017-12-01

The purpose of this study was to document, in their own words, beliefs and attitudes that American pharmacists have towards the pharmaceutical industry and pharmacists' interactions with industry. An ethnographic-style qualitative study was conducted utilizing open-ended interviews with four hospital pharmacists, two independent pharmacists, two retail pharmacists and one administrative pharmacist in the Washington, DC, metropolitan area to elicit descriptions of and attitudes towards pharmacists' relationships with industry. Analysis of the qualitative material followed established ethnographic conventions of narrative thematic analysis. All pharmacists reported interactions with pharmaceutical company representatives. Most had received free resources or services from industry, including educational courses. Respondents uniformly believed that industry promotional efforts are primarily directed towards physicians. Although respondents felt strongly that drug prices were excessive and that 'me-too' drugs were of limited use, they generally had a neutral-to-positive view of industry-funded adherence/compliance programmes, coupons, vouchers, and copay payment programmes. Interviewees viewed direct-to-consumer advertising negatively, but had a generally positive view of industry-funded drug information. Pharmacists may represent a hitherto under-identified cohort of health professionals who are targeted for industry influence; expanding roles for pharmacists may make them even more attractive targets for future industry attention. Pharmacy schools should ensure that students learn to rely on unbiased information sources and should teach students about conflicts of interest and the risks of interacting with industry. Further research should be conducted on the extent to which pharmacists' attitudes towards their duties and towards drug assessment and recommendation are influenced by the pharmaceutical industry. © 2017 Royal Pharmaceutical Society.

The Implications of Industrial Management for the Administration of Industrial Education Programs

Science.gov (United States)

White, Michael R.

1978-01-01

The paper discusses the functions and principles of industrial management, compares educational and industrial organization, and notes industrial management techniques applicable to industrial education administration. (MF)

Strengthening industry-research linkage for small scale industrial ...

African Journals Online (AJOL)

Strengthening industry-research linkage for small scale industrial development in Ghana - the relevance of scientific and technological information. ... Journal of Applied Science and Technology. Journal Home · ABOUT · Advanced Search ...

Distance collaborations with industry

Energy Technology Data Exchange (ETDEWEB)

Peskin, A.; Swyler, K.

1998-06-01

The college industry relationship has been identified as a key policy issue in Engineering Education. Collaborations between academic institutions and the industrial sector have a long history and a bright future. For Engineering and Engineering Technology programs in particular, industry has played a crucial role in many areas including advisement, financial support, and practical training of both faculty and students. Among the most important and intimate interactions are collaborative projects and formal cooperative education arrangements. Most recently, such collaborations have taken on a new dimension, as advances in technology have made possible meaningful technical collaboration at a distance. There are several obvious technology areas that have contributed significantly to this trend. Foremost is the ubiquitous presence of the Internet. Perhaps almost as important are advances in computer based imaging. Because visual images offer a compelling user experience, it affords greater knowledge transfer efficiency than other modes of delivery. Furthermore, the quality of the image appears to have a strongly correlated effect on insight. A good visualization facility offers both a means for communication and a shared information space for the subjects, which are among the essential features of both peer collaboration and distance learning.

Industrial leadership in Science-based Industries. A co-evolution model

OpenAIRE

Fatas-Villafranca , Francisco; Jarne , Gloria; Sanchez-Choliz , Julio

2009-01-01

Abstract In this paper, we seek to analyse the role of national university systems in combination with technological and market factors as sources of industrial leadership and industry growth in sciencebased industries. We propose a model in which national university systems and their respective national firms and industries are considered as co-evolving. National firms compete on a worldwide level and they rely on the progress of science and the availability of scientists to innov...

Analysis of Expectations of Forest Products Industry from Forest Industry Engineering Education

OpenAIRE

GEDİK, Tarık; ÇİL, Muhammet; SEVİM KORKUT, Derya; CEMİL AKYÜZ, Kadri; KOŞAR, Gökşen; BEKAR, İlter

2016-01-01

Forest industry engineers, representing the qualified labor within the forest products industry, choose their field of study either deliberately or by chance. This study explores the main skill sets of forest industry engineers required by forest products industry. As representatives of forest industry owner of forest products companies were surveyed about their views on the qualifications a forest industry engineer must have.This study covered total 7111 companies registered to TOBB as a for...

Polish food industry 2008-2013

OpenAIRE

Mroczek, Robert; Drożdż, Jadwiga; Tereszczuk, Mirosława; Urban, Roman

2014-01-01

The aim of the study is to evaluate the functioning of the food industry and its various sectors in 2008-2013. Meat and poultry industry. Dairy industry. Fishing industry. Milling industry. Sugar industry. Oil-mill industry. Processing of fruit, vegetables and potatoes. Bakery industry. Confectionery industry. Feed industry. Production of other food products. Production of alcoholic beverages.Tobacco industry. Food industry.

Industrial Technologies Program Research Plan for Energy-Intensive Process Industries

Energy Technology Data Exchange (ETDEWEB)

Chapas, Richard B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Colwell, Jeffery A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2007-10-01

In this plan, the Industrial Technologies Program (ITP) identifies the objectives of its cross-cutting strategy for conducting research in collaboration with industry and U.S. Department of Energy national laboratories to develop technologies that improve the efficiencies of energy-intensive process industries.

Industry honoured

CERN Multimedia

2008-01-01

CERN has organised a day to thank industry for its exceptional contributions to the LHC project. Lucio Rossi addresses CERN’s industrial partners in the Main Auditorium.The LHC inauguration provided an opportunity for CERN to thank all those who have contributed to transforming this technological dream into reality. Industry has been a major player in this adventure. Over the last decade it has lent its support to CERN’s teams and participating institutes in developing, building and assembling the machine, its experiments and the computing infrastructure. CERN involved its industrial partners in the LHC inauguration by organising a special industry prize-giving day on 20 October. Over 70 firms accepted the invitation. The firms not only made fundamental contributions to the project, but some have also supported LHC events in 2008 and the inauguration ceremony through generous donations, which have been coordinated by Carmen Dell’Erba, who is responsible for secu...

Economical solution for the industrial waste problem of Karachi industrial area

International Nuclear Information System (INIS)

Mubin, S.

2005-01-01

The increased rate of industrialization coupled with rapid urbanization in Pakistan has given rise to serious water pollution and environmental problems. A vast range of industries has been established in the country during the last twenty five years, including tanneries, fertilizers, textiles, refineries, chemicals, vegetable oils, paper am pulp, sugar and food. Little attention was paid towards a large scale release of wastewater from these industries. Presently wastewater produced from these industries has been considered a serious problem and research in being conducted to solve its associated problems. Recently, it has been realized that there is a significant threat of water borne diseases, degradation of fresh water quality, environmental depletion and soil deterioration from the effluent and toxic emission of industries. Being a developing country and having limited resources, it is hard to install treatment plants on the industrial effluent with every industry before discharging them into streams which are also creating disturbance in natural ecosystem. An effort has been made to solve wastewater problem by implementing statistical tools on data of Karachi industrial state, obtained from EPA JICA and PCRWR, Islamabad. (author)

Spring 2004 Industry Study: Space Industry

National Research Council Canada - National Science Library

Romano, Anthony F; Brandt, Linda S; Burns, Cynthia Q; Grubbs, Lawrence K; McGee, Anne E; Barzler, Paul M; Bennett, Kathleen R; Bryner, Drew A; Clubb, Timothy L; Flynn, John E

2004-01-01

.... These challenges include the complex technologies necessary to safely travel the hazardous environment and great distances of space, as well as the public will and commitment of resources required...

Chemicals Industry Vision

Energy Technology Data Exchange (ETDEWEB)

none,

1996-12-01

Chemical industry leaders articulated a long-term vision for the industry, its markets, and its technology in the groundbreaking 1996 document Technology Vision 2020 - The U.S. Chemical Industry. (PDF 310 KB).

Industrial heritage and tourism: analysis of potentiality and motion for a circuit of industrial tourism in Barracas, Buenos Aires, Argentina

Directory of Open Access Journals (Sweden)

Aldo Guzman Ramos

2016-03-01

Full Text Available Argentina´s industrial development which started at the end of 19th  century and suffered a drop in 1970 decade has left numerous real state and private properties spread in the national territory. It`s feasible to use them through Industrial Tourism as a mechanism to economically and socially reactivate abandoned spaces and in crisis, but also as a way to revitalize their identity and culture recovering a part of their history. Exploratory and descriptive methodology implied a reconnaissance of industrial properties located in Barracas neighborhood from Ciudad de Buenos Aires, Argentina, applying variables to determine the state and touristic-recreational potentiality by means of Likert scale. As a result 68 places were selected and after utilizing the variables 24 sites remained, which were organized to prepare an Industrial Tourist Circuit that could complement Buenos Aires cultural offer.

A primer on industrial ecosystems : a strategy for sustainable industrial development

Energy Technology Data Exchange (ETDEWEB)

Cote, R P [Dalhousie Univ., Halifax, NS (Canada). Eco-Efficiency Centre; [Dalhousie Univ., Halifax, NS (Canada). Faculty of Management, School for Resource and Environmental Studies

2003-07-01

Industrial ecology incorporates ecological theories, functions and limits into the design of industrial production systems, processes and products. The main objective is to enhance environmental and economic performance through collaboration in managing environmental resource issues such as energy, water and materials. Industrial ecology recognizes the connectedness and synergies of materials, products and infrastructure. As such, it considers the life cycle of products, the design of buildings, infrastructure and industrial parks. By working together, businesses gain a collective benefit which is greater than the total of the individual benefits each company could achieve on its own. Industrial ecology also considers the reuse, recovery and recycling of resources. The benefits include: efficiency of resource use; cost reduction for industrial infrastructure; sustainable development support; and, new opportunities in economic development, technology development, manufacturing, and business management. This primer also presents guidelines for win-win projects in industrial ecology. refs., figs.

FEASIBILITY ANALYSIS ON INDUSTRIAL SYMBIOSIS BETWEEN CEMENT INDUSTRY AND TEA INDUSTRY

Directory of Open Access Journals (Sweden)

Shailendra Kumar Yadav

2015-08-01

Full Text Available The project aims at analyzing the feasibility of utilizing cement kiln dust (CKD in treating wastewater from tea industry with the concept of industrial symbiosis. CKD is the dust collected at the air pollution control device(s associated with a kiln system from cement industry. A very less percent of CKD is recycled and the rest is land filled /stockpiled; disrupts groundwater through leaching of minerals. Cement Kiln Dust (CKD, rich in CaO, SiO2, behaves as a neutralizing as well as stabilizing agent for tea effluent treatment. The ability of CKD to reduce the BOD, COD, TSS, and phosphates in tea effluent was analyzed and the optimum dosage is determined. The effect of different dosages of Cement Kiln Dust ranging from (1-3 gm/l has been discussed on the bench scale tests. The results show that, for different CKD concentrations, high removal efficiencies of 94.4 and 99.0, 58.9 for BOD, TSS, phosphates and a lower efficiency for COD with 9.09 are achieved for 2.5gm/l. The persistent presence of color providing proteins theaflavins (TF and the arubigins (TR from the leftover tea leaves in the effluent imparts the low removal efficiencies of COD. However, the COD value is within the dischargeable limits (CPCB standards. Moreover, a considerable removal efficiency and high SVI of 0.181 makes CKD a feasible coagulant in treating tea effluent with optimum dosage of 2.5g/l. The objective of developing industrial symbiosis network was thus achieved using the CKD to treat wastewater from tea industries.   International Journal of EnvironmentVolume-4, Issue-3, June-August 2015Page: 20-34

Industry Platforms and New Industrial Policy in Russia

Directory of Open Access Journals (Sweden)

Svetlana V. Orekhova

2017-12-01

Full Text Available The article aims at clarifying Russian industrial policy as a result of business models changing and market reconstruction. The research bass on the hypothesis that the choice of the industrial policy administrative measures depends on the object of management. It is important to link government regulation of markets with corporate strategies. We reveal that modern economic systems based on using of electronic technologies, big data, and innovative activity. Technological platforms as the single organizational and economic mechanisms affect economic systems very much. We study the content and main characteristics of a business model, is called the "technological platform". We also identify the main required changes in industrial policy. We analyze the matching between scientific and technological scenarios of the Russian economic development and the technological platform. There are two areas of the new industrial policy. They are: a multi-sectoral approach to regulating and improving the quality of the national institutional environment. The industrial and cluster management approaches are inefficient in modern conditions. There is a need for each platform of its technological development scenario. We also clarify the role of the state in the functioning of technological platforms.

Finnish industry's energy requirement

International Nuclear Information System (INIS)

Punnonen, J.

2000-01-01

Industry uses around half of the electricity consumed in Finland. In 1999, this amounted to 42.3 TWh and 420 PJ of fuel. Despite the continual improvements that have been made in energy efficiency, energy needs look set to continue growing at nearly 2% a year. Finnish industrial output rose by some 5.5% in 1999. In energy-intensive sectors such as pulp and paper, output rose by 3.4%, in the metal industry by 4%, and in the chemical industry by 3.1%. Growth across Finnish industry is largely focused on the electrical and electronics industries, however, where growth last year was 24.3% The Finnish forest products industry used a total of 26.1 TWh of electricity last year, up 1% on 1998. This small increase was the result of the industry's lower-than-average operating rate in the early part of the year The metal industry used 7.2 TWh of electricity, an increase of 5.8% on 1998. Usage in the chemical industry rose by 2% to 5.2 TWh. Usage by the rest of industry totalled 3.8 TWh, up 2.3% on 1998. All in all, industry's use of electricity rose by 2% in 1999 to 42,3 TWh. Increased demand on industry's main markets in Europe will serve to boost industrial output and export growth this year. This increased demand will be particularly felt in energy-intensive industries in the shape of an increased demand for electricity. Overall, electricity demand is expected to grow by 3% this year, 1% more than industry's longterm projected electricity usage growth figure of 2%. The structure of industry's fuel use in Finland has changed significantly over the last 25 years. Oil, for example, now accounts for only some 10% of fuel use compared to the 40% typical around the time of the first oil crisis. Oil has been replaced by biofuels, peat, and natural gas. The pulp and paper industry is the largest industrial user of renewable energy sources in Finland, and uses wood-related fuels to cover nearly 70% of its fuel needs

Upstream petroleum industry financial conditions and distribution of industry generated revenue

International Nuclear Information System (INIS)

Anon.

1996-01-01

A review of profitability of Canada's upstream petroleum industry and of the direct fiscal burden (all payments to governments) on the industry was presented based on a study conducted during June-September 1996. Information was collected from 200 companies that represent over 90 per cent of the total oil and gas production revenue and most of the refining and fuel sales. Part 2 of the review examined taxes and other payments to government by 58 companies. It was concluded that the Canadian oil and gas industry is a major contributor of taxes to all three levels of government. While the industry has made concerted efforts to reduce its controllable costs and increase its profitability, it is claimed that Canadian petroleum industry profit margins are extremely low. A plea was made to all levels of governments to consider the highly competitive nature of the industry, the constantly changing market forces, shifts in world politics, regulatory trends, currency values and technology that affect the industry, and the high risks inherent in exploration and development prior to establishing ever-increasing claims on the industry's dwindling profits. 22 tabs., 17 figs

An Industrial Physics Toolkit

Science.gov (United States)

Cummings, Bill

2004-03-01

Physicists possess many skills highly valued in industrial companies. However, with the exception of a decreasing number of positions in long range research at large companies, job openings in industry rarely say "Physicist Required." One key to a successful industrial career is to know what subset of your physics skills is most highly valued by a given industry and to continue to build these skills while working. This combination of skills from both academic and industrial experience becomes your "Industrial Physics Toolkit" and is a transferable resource when you change positions or companies. This presentation will describe how one builds and sells your own "Industrial Physics Toolkit" using concrete examples from the speaker's industrial experience.

Hazardous and Industrial Wastes Management: a Case Study of Khazra Industrial Park, Kerman

Directory of Open Access Journals (Sweden)

Hossein Jafari Mansoorian

2013-08-01

Full Text Available Background & Aims of the Study: Increasing hazardous industrial wastes and lack of necessary regulations for management of them have led to serious problems in some parts of Iran. The aim of this study was to evaluate the situation of collection, transportation, recycling, and disposal of hazardous industrial wastes in the Khazra Industrial Park of Kerman, Iran. Materials & Methods: This study was a descriptive cross-sectional study that was done using questionnaires and local visits during year 2009. In this questionnaire, some information about the industrial wastes, production, storage on site , collection, transformation, sorting, recycling, and disposal were recorded. Results:   In the Khazra Industrial Park, 71,600 kg/day of different industrial waste is produced. The biggest proportion of waste includes metals, and construction and demolition waste which are about 16,500 tons a year. The smallest proportion is non-iron metal waste, which is produced at a rate of 8 tons per year. 88.7 percent of the active industries at the Khazra Industrial Park produce solid industrial waste. Most of the industrial units do not use a united and coordinated system for storing waste and have no specific place for temporary storage inside the industrial park. The majority of industrial waste collection, which is about 59.8%, is done by private contractors. The industrial units transfer their waste separately, and just 9 industrial units recycle their waste. Disposal of these wastes is mainly done by selling to trading agencies. Each day, 3 tons of hazardous industrial waste is produced in this park. The highest production belongs to the oil factory (Keyhan Motor. Conclusions: According to the results, the Khazra Industrial Park needs a unified system for storing, transporting and collecting the sorted waste, and it also needs to have a transportation station with basic facilities. The wastes of most industrial units at the Khazra Industrial Park have the

More Sustainability in Industry through Industrial Internet of Things?

Directory of Open Access Journals (Sweden)

Grischa Beier

2018-01-01

Full Text Available Industrial production plays an important role for achieving a green economy and the sustainable development goals. Therefore, the nascent transformation of industrial production due to digitalization into a so-called Industrial Internet of Things (IIoT is of great interest from a sustainable development point of view. This paper discusses how the environmental dimension of a sustainable development can potentially benefit from the IIoT—focusing especially on three topics: resource efficiency, sustainable energy and transparency. It presents a state of the art literature analysis of IIoT-enabled approaches addressing the three environmental topics. This analysis is compared with the findings of a survey among Chinese industrial companies, investigating the sustainability-related expectations of participants coming along with the implementation of IIoT solutions. China has been chosen as a case study because it brings together a strong industrial sector, ambitious plans regarding industrial digitalization and a high relevance and need for more sustainability. The survey was conducted with the means of a questionnaire which was distributed via email and used for direct on-site interviews. It focused on large and medium sized companies mainly from Liaoning Province and had a sample size of 109 participants.

Industry Study, Environment Industry, Spring 2009

Science.gov (United States)

2009-01-01

practices. For example, the cruising sector of the tourism industry has widely- acknowledged negative environmental impacts (carbon emissions and ocean...Services: An Industry Analysis ,” (2009): 4. http://www.berr.gov.uk/files/file50253.pdf 18 Ibid., 5. 19 EBI, 21 20 Department for Business...Ibid., 26. 50 DataMonitor Country Analysis Report, “Korea: In-Depth PESTLE Insights,” (June 2008): 4. 51 EBI, “3000,” 1-22. 52 Ibid., 5-130, 5

Second Generation Reusable Launch Vehicle Development and Global Competitiveness of US Space Transportation Industry: Critical Success Factors Assessment

Science.gov (United States)

Enyinda, Chris I.

2002-01-01

In response to the unrelenting call in both public and private sectors fora to reduce the high cost associated with space transportation, many innovative partially or fully RLV (Reusable Launch Vehicles) designs (X-34-37) were initiated. This call is directed at all levels of space missions including scientific, military, and commercial and all aspects of the missions such as nonrecurring development, manufacture, launch, and operations. According to Wertz, tbr over thirty years, the cost of space access has remained exceedingly high. The consensus in the popular press is that to decrease the current astronomical cost of access to space, more safer, reliable, and economically viable second generation RLVs (SGRLV) must be developed. Countries such as Brazil, India, Japan, and Israel are now gearing up to enter the global launch market with their own commercial space launch vehicles. NASA and the US space launch industry cannot afford to lag behind. Developing SGRLVs will immeasurably improve the US's space transportation capabilities by helping the US to regain the global commercial space markets while supporting the transportation capabilities of NASA's space missions, Developing the SGRLVs will provide affordable commercial space transportation that will assure the competitiveness of the US commercial space transportation industry in the 21st century. Commercial space launch systems are having difficulty obtaining financing because of the high cost and risk involved. Access to key financial markets is necessary for commercial space ventures. However, public sector programs in the form of tax incentives and credits, as well as loan guarantees are not yet available. The purpose of this paper is to stimulate discussion and assess the critical success factors germane for RLVs development and US global competitiveness.

Industrial Engineering : Innovative Networks - 5th International Conference on Industrial Engineering and Industrial Management

CERN Document Server

Bogataj, Marija; Ros-McDonnell, Lorenzo

2012-01-01

The Spanish Conference of Industrial Engineering /Ingeniería de Organización Industrial (CIO) is an annual meeting promoted by Asociación para el Desarrollo de la Ingeniería de Organización/ Industrial Engineers Association (ADINGOR). The aim of CIO is to establish a forum for the open and free exchange of ideas, opinions and academic experiences about research, technology transfer or successful business experiences in the field of Industrial Engineering. The Scientific Committee is composed by 68 international referees and we foresee the attendance of some 200 people from more than 15 countries and following the rotation of venue and organization between various Spanish universities, the 2011 Conference will be the fifteenth National Conference and the fifth International Conference in Cartagena.   During three days the 2011 Conference will include the participation of European and other foreign countries researchers and practitioners that will presenting communications, reproduced in this volume, on ...

KIBO Industry, innovates in aerospace

Science.gov (United States)

Paillard, Jean-Philippe

2016-07-01

The conquest of space is a true inspiration. Imagine a long-duration mission to a distant destination. What shall we take to produce our food? A cow, fish, chicken, or just eggs. In the current state of the animal production technologies are complicated and expensive to implement, except perhaps one: the breeding of edible insects. Based on this postulate KIBO in partnership with Space Agriculture Task Force and the university's department of Nutrition Nagoya most innovative research program is created in modern nutrition. This program is called Pegasus. Pegasus research program aims to develop food productions and modules applicable to the aerospace conquest. Kibo industry is the first entomocole production company creat in Europe to human food; it aims to become the world leader by 2020. Kibo industry is particularly specialized in producing entomosource (products with insects). The first phase of the program is to achieve an outcome cereal bar edible insect to aerospace. So we will present the issues and objectives of the project, for aerospace and us. Jean-Philippe Paillard is the KIBO industry CEO and Vice President of the FFPIDI insects farms federation. He is also the co computer alone authorization dossier on the market in Europe and therefore the privileged interlocutor of the General Directorate for Health and Customer Review on this topic. He intervened at the last conference on the insect organized by FAO in Wageningen and various universities in France.

The Evolution of a Creative Industry : The industrial dynamics and spatial evolution of the global fashion design industry

NARCIS (Netherlands)

Wenting, R.

2008-01-01

The recent growth of creative industries has raised the interest of both policy makers and academic scholars. However, we know very little about the forces that drive the development and geography of these industries. This dissertation provides an in-depth study of the industrial dynamics and

Which industry is greener? An empirical study of nine industries in OECD countries

International Nuclear Information System (INIS)

Fujii, Hidemichi; Managi, Shunsuke

2013-01-01

This study analyzed the relationship between the CO 2 emissions of different industries and economic growth in OECD countries from 1970 to 2005. We tested an environmental Kuznets curve (EKC) hypothesis and found that total CO 2 emissions from nine industries show an N-shaped trend instead of an inverted U or monotonic increasing trend with increasing income. The EKC hypothesis for sector-level CO 2 emissions was supported in the (1) paper, pulp, and printing industry; (2) wood and wood products industry; and (3) construction industry. We also found that emissions from coal and oil increase with economic growth in the steel and construction industries. In addition, the non-metallic minerals, machinery, and transport equipment industries tend to have increased emissions from oil and electricity with economic growth. Finally, the EKC turning point and the relationship between GDP per capita and sectoral CO 2 emissions differ among industries according to the fuel type used. Therefore, environmental policies for CO 2 reduction must consider these differences in industrial characteristics. - Highlights: ► We analyze the relationship between CO 2 emissions and economic growth by industry. ► Wood, paper, and construction industries have an inverted U-shaped relationship. ► The turning points differ among industries according to the fuel type used. ► The policies for CO 2 reduction must consider differences in industrial characteristics

Industry 4.0 and representative participation in innovation in manufacturing industries

OpenAIRE

Ramioul, Monique

2017-01-01

Industry 4.0 and representative participation in innovation in manufacturing industries Prof. dr. Monique Ramioul HIVA-KU Leuven, Belgium Abstract submitted for the ETUI-workshop “Digitalization of manufacturing and restructuring of value chains: technology adoption, upgrading, and the changing geography of production in Europe.” (23-24 February 2017, Naples Italy). Under the umbrella concept Industry4.0, the advanced digitalisation and robotisation of industry is presented as a pro...

Competitive strategies in fashion industries: Portuguese footwear industry

Science.gov (United States)

Marques, A. D.; Guedes, G.; Ferreira, F.

2017-10-01

Portugal is an important player in the European fashion industry. The Portuguese footwear industry, “low-tech” and traditional industry, dominated by SMEs and located in two main clusters, is a success case in the Portuguese economy. After a long period of decline until 2009, the footwear companies prepared new strategies that made big changes in the image and performance achieved. Since 2009, exports have increased more than 55% and the Portuguese footwear has grown in almost all the most important foreign markets. The competitive strategies followed by the Portuguese footwear companies are different and they can be clearly identified according Porter’s three generic competitive strategies: cost leadership, differentiation and focus strategy. This paper had analysed seven Portuguese footwear companies (seven cases, case study strategy) and the results obtained shows how important is to have the right approach to the markets, according the internal and external resources that each firm has available. The footwear clusters in Portugal and the sectorial organizations are also very important in this competitive performance achieved by the companies. Last years the Portuguese governments recognize this increasing importance of the fashion industries and prepared several programs to promote these industries in Europe and other continents.

Industrial Engineering

DEFF Research Database (Denmark)

Karlsson, Christer

2015-01-01

Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally).......Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally)....

Final Scientific Report - Wireless and Sensing Solutions Advancing Industrial Efficiency

Energy Technology Data Exchange (ETDEWEB)

Budampati, Rama; McBrady, Adam; Nusseibeh, Fouad

2009-09-28

The project team's goal for the Wireless and Sensing Solution Advancing Industrial Efficiency award (DE-FC36-04GO14002) was to develop, demonstrate, and test a number of leading edge technologies that could enable the emergence of wireless sensor and sampling systems for the industrial market space. This effort combined initiatives in advanced sensor development, configurable sampling and deployment platforms, and robust wireless communications to address critical obstacles in enabling enhanced industrial efficiency.

Industry and energy; Industrie et energie

Energy Technology Data Exchange (ETDEWEB)

Birules y Bertran, A.M. [Ministere des Sciences et de la Technologie (Spain); Folgado Blanco, J. [Secretariat d' Etat a l' Economie, a l' Energie et aux PME du Royaume d' Espagne (Spain)

2002-07-01

This document is the provisional version of the summary of the debates of the 2433. session of the European Union Council about various topics relative to the industry and the energy. The energy-related topics that have been debated concern: the government helps in coal industry, the internal electricity and gas market, the trans-European energy networks, the bio-fuels in transportation systems, the energy charter, the pluri-annual energy program, and the green book on the security of energy supplies. (J.S.)

Industry X.0 : Reimaging industrial development

CSIR Research Space (South Africa)

Zachar, H

2017-10-01

Full Text Available Quantum Mainframe Client-server & PCs Web 1.0 ecommerce Web 2.0, cloud, mobile Big data, analytics, visualization IoT & smart machines Artificial intelligence Quantum computing 6 T o d a y 1950 1960 1970 1980 1990 2000 2010 2020... NEW SET OF CORE CAPABILITIES TO SUCCEED INDUSTRY X.0 INDUSTRY 4.0 EFFICIENCIES HYPER-PERSONALIZED EXPERIENCES & NEW SOURCES OF GROWTH SOCIAL MEDIA CLOUD ANALYTICS MOBILITY WEB 1.0/E-COMMERCE PCS, SERVERS AND DEDICATED HARDWARE PCS...

Industry X.0 : Reimaging industrial development.

CSIR Research Space (South Africa)

Zachar, H

2017-10-01

Full Text Available Quantum Mainframe Client-server & PCs Web 1.0 ecommerce Web 2.0, cloud, mobile Big data, analytics, visualization IoT & smart machines Artificial intelligence Quantum computing 6 T o d a y 1950 1960 1970 1980 1990 2000 2010 2020... NEW SET OF CORE CAPABILITIES TO SUCCEED INDUSTRY X.0 INDUSTRY 4.0 EFFICIENCIES HYPER-PERSONALIZED EXPERIENCES & NEW SOURCES OF GROWTH SOCIAL MEDIA CLOUD ANALYTICS MOBILITY WEB 1.0/E-COMMERCE PCS, SERVERS AND DEDICATED HARDWARE PCS...

FOSSIL FUEL INDUSTRIES

Science.gov (United States)

The chapter focuses on methane emissions from the coal and natural gas industries. The petroleum industry is not addressed because of the lack of related quality data. Emission points are identified for each industry, and a discussion of factors affecting emissions is presented. ...

Analisa Swot Pada Kawasan Industri Candi Jawa Tengah Menuju Eco Industrial Park

OpenAIRE

Hervino, Prayudha Budi; Puspitasari, Nia Budi

2014-01-01

Industrial park in Indonesia must pay attention to continuous development and environmentally conscious, which is in line with constitution number 3 of 2014. The development of Candi Industrial Park has been inducing the presence of pros and cons from surrounding society. According to the chief of Purwoyoso, liquid waste and noise from production process of Candi Industrial Park could still be found. The primary concept of Eco Industrial Park (EIP) is to build an industry that is environmenta...

Industrial ecology: a new perspective on the future of the industrial system.

Science.gov (United States)

Erkman, S

2001-09-22

Industrial ecology? A surprising, intriguing expression that immediately draws our attention. The spontaneous reaction is that "industrial ecology" is a contradiction in terms, something of an oxymoron, like "obscure clarity" or "burning ice". Why this reflex? Probably because we are accustomed to considering the industrial system as isolated from the Biosphere, with factories and cities on one side and nature on the other, as well as the recurrent problem of trying to minimise th impact of the industrial system on what is "beyond" it: its surroundings, the "environment". As early as the 1950's, this end-of-pipe angle was the one adopted by ecologists, whose first serious studies focused on the consequences of the various forms of pollution on nature. In this perspective on the industrial system, human industrial activity as such remained outside the field of research. Industrial ecology explores the opposite assumption: The industrial system can be seen as a certain kind of ecosystem. After all, the industrial system, just as natural ecosystems, can be described as a particular distribution of materials, energy, and information flows. Furthermore, the entire industrial system relies on resources and services provided by the Biosphere, from which it cannot be dissociated. (It should be specified that "industrial", in the context of industrial ecology, refers to all human activities occurring within modern technological society. Thus, tourism, housing, medical services, transportation, agriculture, etc. are part of the industrial system.) Besides its rigorous scientific conceptual framework (scientific ecology), industrial ecology can also be seen as a practical approach to sustainability. It is an attempt to address the question, "How can the concept of sustainable development be made operational in an economically feasible way?" Industrial ecology represents precisely one of the paths that could provide concrete solutions. Governments have traditionally approached

Women and creation in the videogame industry in Spain: opportunities and difficulties in masculinized spaces

Directory of Open Access Journals (Sweden)

Aurora Méndez Martínez

2017-12-01

Full Text Available Video games are one of the first leisure alternatives in our society and generate millions of euros in profits annually. However, only 17% of its creators are women, which implies an important loss of creative capital and high economic gains that are not equitably distributed in a context of social inequality. Multiple factors, from the content of video games to the social environment, negatively influence women, creating a disaffection for video games. On the other hand, the masculinized environments and the lack of authority of the women around the videogames, curb the pretensions of the players to make the leap toward the professionalization in this industry. The objective of this article, through a bibliographical review, is to begin a research of the causes of the underrepresentation of women in the video game industry, in order to find solutions, create a more sustainable economy for Europe, an increase of equal spaces And greater job opportunities for women.

Proceedings of the 1992 DOE-industry thermal distribution conference

Energy Technology Data Exchange (ETDEWEB)

Andrews, J.W. (ed.)

1992-06-01

The subject of the conference was thermal distribution in small buildings. Thermal distribution systems are the ductwork, piping, or other means used to transport heat or cooling effect from the equipment in which the heat or cooling is produced to the building spaces in which it is used. The small buildings category is defined to include single-family residential and multifamily and commercial buildings with less than 10,000 ft{sup 2} floor area. The 1992 DOE-Industry Thermal Distribution Conference was conceived as the beginning of a process of information transfer between the DOE and the industries having a stake in thermal distribution systems, whereby the DOE can make the industry aware of its thinking and planned directions early enough for changes to be made, and whereby the industries represented can provide this input to the DOE on a timely and informed basis. In accordance with this, the objectives of the Conference were: To present--to a representative group of researchers and industry representative--the current industry thinking and DOE's current directions for research in small-building thermal distribution. To obtain from industry and the research community a critique of the DOE priorities and additional ideas concerning how DOE can best assist the industry in promoting energy conservation in thermal distribution systems.

Proceedings of the 1992 DOE-industry thermal distribution conference

Energy Technology Data Exchange (ETDEWEB)

Andrews, J.W. [ed.

1992-06-01

The subject of the conference was thermal distribution in small buildings. Thermal distribution systems are the ductwork, piping, or other means used to transport heat or cooling effect from the equipment in which the heat or cooling is produced to the building spaces in which it is used. The small buildings category is defined to include single-family residential and multifamily and commercial buildings with less than 10,000 ft{sup 2} floor area. The 1992 DOE-Industry Thermal Distribution Conference was conceived as the beginning of a process of information transfer between the DOE and the industries having a stake in thermal distribution systems, whereby the DOE can make the industry aware of its thinking and planned directions early enough for changes to be made, and whereby the industries represented can provide this input to the DOE on a timely and informed basis. In accordance with this, the objectives of the Conference were: To present--to a representative group of researchers and industry representative--the current industry thinking and DOE`s current directions for research in small-building thermal distribution. To obtain from industry and the research community a critique of the DOE priorities and additional ideas concerning how DOE can best assist the industry in promoting energy conservation in thermal distribution systems.

Farmaceutische industrie

NARCIS (Netherlands)

Ros JPM; van der Poel P; Etman EJ; Montfoort JA; LAE

1995-01-01

Dit rapport over de farmaceutische industrie is gepubliceerd binnen het Samenwerkingsproject Procesbeschrijvingen Industrie Nederland (SPIN). In het kader van dit project is informatie verzameld over industriele bedrijven of industriele processen ter ondersteuning van het overheidsbeleid op het

EDITORIAL: Industrial Process Tomography

Science.gov (United States)

Anton Johansen, Geir; Wang, Mi

2008-09-01

There has been tremendous development within measurement science and technology over the past couple of decades. New sensor technologies and compact versatile signal recovery electronics are continuously expanding the limits of what can be measured and the accuracy with which this can be done. Miniaturization of sensors and the use of nanotechnology push these limits further. Also, thanks to powerful and cost-effective computer systems, sophisticated measurement and reconstruction algorithms previously only accessible in advanced laboratories are now available for in situ online measurement systems. The process industries increasingly require more process-related information, motivated by key issues such as improved process control, process utilization and process yields, ultimately driven by cost-effectiveness, quality assurance, environmental and safety demands. Industrial process tomography methods have taken advantage of the general progress in measurement science, and aim at providing more information, both quantitatively and qualitatively, on multiphase systems and their dynamics. The typical approach for such systems has been to carry out one local or bulk measurement and assume that this is representative of the whole system. In some cases, this is sufficient. However, there are many complex systems where the component distribution varies continuously and often unpredictably in space and time. The foundation of industrial tomography is to conduct several measurements around the periphery of a multiphase process, and use these measurements to unravel the cross-sectional distribution of the process components in time and space. This information is used in the design and optimization of industrial processes and process equipment, and also to improve the accuracy of multiphase system measurements in general. In this issue we are proud to present a selection of the 145 papers presented at the 5th World Congress on Industrial Process Tomography in Bergen

2001 Industry Studies: Services Industry

National Research Council Canada - National Science Library

Cervone, Michael

2001-01-01

.... has maintained its economic strength in traditional services industries such as transportation, tourism, public utilities, finance and insurance, accounting, engineering, architecture, medical, legal...

Regional Aspects of New Industrialization

Directory of Open Access Journals (Sweden)

Yakov Petrovich Silin

2017-09-01

new statistical information to the knowledge of regional economy because, since 2000, the regional statistics in the country have been operated to the data on federal districts, but not on large economic districts. We have allocated and considered several strategic directions of the structural transformations promoting the activation of the processes of the formation of new industrialization in the space of studied macro-region. The results of the research can serve as a reference point for the strategies of regional development

China’s wood furniture manufacturing industry: industrial cluster and export competitiveness

OpenAIRE

Yang, hongqiang; Ji, Chunyi; Nie, Ning; Hong, Yinxing

2012-01-01

China is the largest furniture exporter in the world. Its wood furniture industry has become an important part of the country’s forestry economic development. Hence, investigating China’s furniture industry cluster and export competitiveness is favorable for the sustainable development of China’s forestry industry. This study indicates that, under the guidance of the export-oriented strategy of China’s reform and opening up for 30 years, the country’s furniture industry has formed three big i...

General Industrial Electronics. Oklahoma Trade and Industrial Education.

Science.gov (United States)

Harwick, Jim; Siebert, Leo

This curriculum guide, part of a series of curriculum guides dealing with industrial electricity and electronics, is designed for use in teaching a course in general industrial electronics. Covered in the first half of the guide are units on the following electronic components: semiconductors, solid-state diodes, bipolar transistors, and special…

Industrial ecology.

Science.gov (United States)

Patel, C K

1992-01-01

Industrial ecology addresses issues that will impact future production, use, and disposal technologies; proper use of the concept should reduce significantly the resources devoted to potential remediation in the future. This cradle-to-reincarnation production philosophy includes industrial processes that are environmentally sound and products that are environmentally safe during use and economically recyclable after use without adverse impact on the environment or on the net cost to society. This will require an industry-university-government round table to set the strategy and agenda for progress. PMID:11607254

The 4th industrial revolution's challenges at the wood industrial manufactories

OpenAIRE

Attila, Gludovatz; László, Bacsárdi

2016-01-01

Substantial technological advances appeared in the industrial sector in the last years. Developments are based on the “Internet of things” idea, called as “Industry 4.0” in Europe. The name is referring to the phenomena that many experts think this is the fourth industrial revolution. The goal of these projects are to create live connections among all industrial machines, tools and the central units. Some techniques and tools, e.g., sensors, big data, cloud computing, 3D printing, robotics an...

Industries and environment - 2014 edition

International Nuclear Information System (INIS)

Maurice, Delphine

2014-04-01

After a general overview of the French economic context (composition of the French industry, the manufacturing industry, industry production and trade balance), this report presents industrial installations with risks: installations classified for the protection of the environment and submitted to industrial authorizations (ICPEA), basic nuclear installations, Seveso industrial facilities, IPPC industrial installations. The next part analyzes the various pressures exerted by the industry on the environment: material production and consumption, water taking, consumption of energetic products, release of pollutants in waters of industrial ICPE, releases in the air, greenhouse gas emissions, production of wastes, accidents and incidents with environmental consequences, polluted sites and soils, hazardous chemical products in the industry, industrial companies involved in nano-technologies and nano-materials. The last part proposes an overview of responses to these issues: implementation of environmental management system, corporate societal responsibility, investments and expenditures for the protection of the environment, industrial eco-activities, eco-labelled products manufactured by the industry

The para-petroleum industry; L'industrie parapetroliere

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

The para-petroleum industry includes societies that realize studies and installations for the deposits exploitation. This document presents the situation of the para-petroleum industry in 2001, the world investment growth of the activity, the french societies financial results and an inventory of the main operations in the amalgamation domain. (A.L.B.)

Metalcasting Industry Technology Roadmap

Energy Technology Data Exchange (ETDEWEB)

none,

1998-01-01

The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap outlines key goals for products and markets, materials technology, manufacturing technology, environmental technology, human resources, and industry health programs. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry.

Industrial College of the Armed Forces Industry Studies 2002: Biotechnology

National Research Council Canada - National Science Library

2002-01-01

The biotechnology industry is critically important to the development of products that will improve health care, agriculture, industrial processes, environmental remediation, and biological defense...

Industrial Performance of the Renewable Resources Industry in China

Directory of Open Access Journals (Sweden)

Dong Zhou

2015-08-01

Full Text Available Promoting the development of renewable resources industry is an effective way to solve the problems of resources shortage and environmental pollution in China. In this paper, studies have found that “market structure” and “ownership structure”, namely “double structure”, is an important explanatory variable that affects industrial performance according to the “structure-conduct-performance” paradigm. Literature reviews have shown that large state-owned enterprises are playing an important role in improving the industrial performance because of the advantage in technology and capital. However, this paper analyzed the performance of China’s renewable resource industry from two aspects—the overall industrial development and the listed companies, from which two conclusions have drawn: (1 Above a designated size, private enterprises have the greatest contribution, while the contribution of state-owned and foreign-funded enterprises is different; (2 The main reason for the high positive growth rate of total factor productivity between 2009 and 2013 is the rapid growth of technological progress such as the improvement of production processes and manufacturing skills, rather than the promotion of management, system, or polices.

Industrial symbiosis

DEFF Research Database (Denmark)

Sacchi, Romain; Remmen, Arne

2017-01-01

This study examines the development of industrial symbiosis through a practical model for physical, organizational, and social interactions in six different cases from around the world. The results provide a framework that can be used by industrial symbiosis practitioners to facilitate the creation...

探求产业伦理%Industry Ethic

Institute of Scientific and Technical Information of China (English)

姚站军

2012-01-01

从层级内涵出发界定,产业伦理分为狭义和广义两种视角,展现逻辑,时空等多种关系维度;科技时代产业文明呼唤产业伦理建构。产业伦理建构的普适范畴主要有质量及安全伦理、信誉及信用伦理。从创新到创值,是新时代产业伦理特色。产业政策伦理理论及案例是产业伦理探求中的重要方面。%Industry ethic has broad sense or narrow sense from the hierarchical connotation and has many kinds of relations dimension, such as logic, space and time, etc. The era of science and technology calls for industry ethic. The main structure on industry ethic includes ethic of safe- ty and quality, and ethic of credit and reputation. From innovation to value creation, is the characteristic of the industry ethics in new age. And the theory and case on ethic of industrial policy are important aspects of industry ethic.

Exploring mechanisms for mobilising industrial sustainability models across different industrial locations

DEFF Research Database (Denmark)

Jacobsen, Ole Morten Noel Brings

2009-01-01

Industrial symbiosis is a model of sustainability which suggests that agglomerations of industries can achieve considerable environmental benefits by engaging in inter-organisational waste recycling, energy cascading and water recovery. This article considers how such a complex inter-organisation......Industrial symbiosis is a model of sustainability which suggests that agglomerations of industries can achieve considerable environmental benefits by engaging in inter-organisational waste recycling, energy cascading and water recovery. This article considers how such a complex inter...... symbiosis model may in this way be mobilised across industrial localities as part of the global corporate search for marked access and cost reductions. This suggestion is supported by an illustrative case study shedding some light on the mechanisms for mobilising sustainability models across localities....

How industries change.

Science.gov (United States)

McGahan, Anita M

2004-10-01

It's fairly obvious: To make intelligent investments within your organization, you need to understand how your whole industry is changing. But such knowledge is not always easy to come by. Companies misread clues and arrive at false conclusions all the time. To truly understand where your industry is headed, you have to take a long-term, high-level look at the context in which you do business, says Boston University professor Anita McGahan. She studied a variety of businesses from a cross section of industries over a ten-year period, examining how industry structure affects business profitability and investor returns. Her research suggests that industries evolve along one of four distinct trajectories--radical, progressive, creative, and intermediating--that set boundaries on what will generate profits in a business. These four trajectories are defined by two types of threats. The first is when new, outside alternatives threaten to weaken or make obsolete core activities that have historically generated profits for an industry. The second is when an industry's core assets--its resources, knowledge, and brand capital--fail to generate value as they once did. Industries undergo radical change when core assets and core activities are both threatened with obsolescence; they experience progressive change when neither are jeopardized. Creative change occurs when core assets are under threat but core activities are stable, and intermediating change happens when core activities are threatened while core assets retain their capacity to create value. If your company's innovation strategy is not aligned with your industry's change trajectory, your plan for achieving returns on invested capital cannot succeed, McGahan says. But if you understand which path you're on, you can determine which strategies will succeed and which will backfire.

Waste Management in Industrial Construction: Investigating Contributions from Industrial Ecology

OpenAIRE

Larissa A. R. U. Freitas; Alessandra Magrini

2017-01-01

The need for effective construction waste management is growing in importance, due to the increasing generation of construction waste and to its adverse impacts on the environment. However, despite the numerous studies on construction waste management, recovery of construction waste through Industrial Symbiosis and the adoption of other inter-firm practices, comprised within Industrial Ecology field of study, have not been fully explored. The present research aims to investigate Industrial Ec...

INDUSTRI KREATIF INDONESIA: PENDEKATAN ANALISIS KINERJA INDUSTRI

OpenAIRE

Ahmad Kamil

2015-01-01

In 2008, the Department of Commerce of the Republic of Indonesia has launched a creative economic development documents interpreted the 2025 Indonesia became the starting point and guide the development of the creative economy in Indonesia. With the existence of this document, the industry and its stakeholders or other stakeholders can readily develop the creative economy in Indonesia. Economic development in the direction of the creative industries is one manifestation of optimism aspiration...

Industry specific financial distress modeling

Directory of Open Access Journals (Sweden)

Naz Sayari

2017-01-01

Full Text Available This study investigates uncertainty levels of various industries and tries to determine financial ratios having the greatest information content in determining the set of industry characteristics. It then uses these ratios to develop industry specific financial distress models. First, we employ factor analysis to determine the set of ratios that are most informative in specified industries. Second, we use a method based on the concept of entropy to measure the level of uncertainty in industries and also to single out the ratios that best reflect the uncertainty levels in specific industries. Finally, we conduct a logistic regression analysis and derive industry specific financial distress models which can be used to judge the predictive ability of selected financial ratios for each industry. The results show that financial ratios do indeed echo industry characteristics and that information content of specific ratios varies among different industries. Our findings show diverging impact of industry characteristics on companies; and thus the necessity of constructing industry specific financial distress models.

Industrial gases

International Nuclear Information System (INIS)

Hunter, D.; Jackson, D.; Coeyman, M.

1993-01-01

Industrial gas companies have fought hard to boost sales and hold margins in the tough economic climate, and investments are well down from their 1989-'91 peak. But 'our industry is still very strong long term' says Alain Joly, CEO of industry leader L'Air Liquide (AL). By 1994, if a European and Japanese recovery follows through on one in the U.S., 'we could see major [investment] commitments starting again,' he says. 'Noncryogenic production technology is lowering the cost of gas-making possible new applications, oxygen is getting plenty of attention in the environmental area, and hydrogen also fits into the environmental thrust,' says Bob Lovett, executive v.p./gases and equipment with Air Products ampersand Chemicals (AP). Through the 1990's, 'Industrial gases could grow even faster than in the past decade,' he says. Virtually a new generation of new gases applications should become reality by the mid-1990s, says John Campbell, of industry consultants J.R. Campbell ampersand Associates (Lexington, MA). Big new oxygen volumes will be required for powder coal injection in blast furnaces-boosting a steel mill's requirement as much as 40% and coal gasification/combined cycle (CGCC). Increased oil refinery hydroprocessing needs promise hydrogen requirements

INTEGRATION OF UKRAINIAN INDUSTRY SCIENTIFIC PERIODACLS INTO WORLD SCIENTIFIC INFORMATION SPACE: PROBLEMS AND SOLUTIONS

Directory of Open Access Journals (Sweden)

T. O. Kolesnykova

2013-11-01

Full Text Available Purpose. Problem of representation lack of scientists’ publications, including transport scientists, in the international scientometric databases is the urgent one for Ukrainian science. To solve the problem one should study the structure and quality of the information flow of scientific periodicals of railway universities in Ukraine and to determine the integration algorithm of scientific publications of Ukrainian scientists into the world scientific information space. Methodology. Applying the methods of scientific analysis, synthesis, analogy, comparison and prediction the author has investigated the problem of scientific knowledge distribution using formal communications. The readiness of Ukrainian railway periodicals to registration procedure in the international scientometric systems was analyzed. The level of representation of articles and authors of Ukrainian railway universities in scientometric database Scopus was studied. Findings. Monitoring of the portals of railway industry universities of Ukraine and the sites of their scientific periodicals and analysis of obtained data prove insufficient readiness of most scientific publications for submission to scientometric database. The ways providing sufficient "visibility" of industry periodicals of Ukrainian universities in the global scientific information space were proposed. Originality. The structure and quality of documentary flow of scientific periodicals in railway transport universities of Ukraine and its reflection in scientometric DB Scopus were first investigated. The basic directions of university activities to integrate the results of transport scientists research into the global scientific digital environment were outlined. It was determined the leading role of university libraries in the integration processes of scientific documentary resources of universities into the global scientific and information communicative space. Practical value. Implementation of the proposed

Energy conservation in mechanical industry; Maitrise de l`energie dans les industries mecaniques

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

The workshop is composed of 12 communications on the theme of energy consumption, conservation and management in industry, and more especially in metal industry: evaluation of the energy savings potential in the French industry; official energy diagnosis procedure in buildings; the French national gas utility policy for energy conservation and economical performance in industry; energy conservation with speed variators for electric motors; energy audits and energy metering for conservation objectives. Examples of energy efficient systems or energy audits in various industrial sectors (compressed air, industrial buildings, heat treatments, curing...) are also presented. The electric power quality EDF`s contract is also discussed

Eco-friendly Development Of Industry

International Nuclear Information System (INIS)

An, Gi Cheol; Park, Hun; Lee, Dong Jin; Ryu, Sang Hui

1998-02-01

This book reports eco-friendly development of industry, which has summary on bring up the issue and research way and system of research. It deals with current state of affairs on eco-friendly development of industry and the case of developed countries such as necessity and meaning of eco-friendly development industry, prospect and change of the tendency, environmental issue by field in Korea like the steel industry, nonferrous metal industry, auto industry, and cement industry and general policy for eco-friendly development of industry.

Neo-industrialization of Kuzbass economy in innovative development of coal industry and machinery

Directory of Open Access Journals (Sweden)

Balabanova Anna

2017-01-01

Full Text Available As part of rental-resource model and access restrictions to capital and new technologies, the attempts to encourage import substitution made by the government do not generate innovative type of economic development and reconstruction of economy’s manufacturing industry competitive on the domestic market. In conditions of searching for a new model of Russian economy development the analysis of a number of problems such as industry degradation, reducing the competitiveness of Russian producers, the growth of structural imbalances and overcoming the negative macroeconomic trends becomes strategically important. This raises the value of neo-industrialization as the integrator of resource security, scientific and industrial potential of Russian economy and high capacity of the domestic market in the innovative development system. A special role neo-industrialization plays for the economic development of old industrial regions, which include Kuzbass (Western Siberia, Russia. Neo-industrial development of Kuzbass economy should be initiated by the technological modernization of mining machinery and innovative development of coal industry.

Implikasi Yuridis Penyelesaian Perselisihati Hubungan Industrial Melalul Pengadllan Hubungan Industrial

OpenAIRE

Adi, Mila Karmila

2004-01-01

The Industrial Relationship Dispute Resolution Law Number2 Year 2004, has a bolished the existence of The Labor Dispute Committee and replaced by the Industrial Relation ship Court. The existence of the Industrial Relation ship Court can influence the relation ships here between worker and employer in the future and subtractthe government intervention in labordispute resolution. Although the Court is notexistyet until 2006, but the resolution process will be questioned whether it will give m...

Indian refining industry

International Nuclear Information System (INIS)

Singh, I.J.

2002-01-01

The author discusses the history of the Indian refining industry and ongoing developments under the headings: the present state; refinery configuration; Indian capabilities for refinery projects; and reforms in the refining industry. Tables lists India's petroleum refineries giving location and capacity; new refinery projects together with location and capacity; and expansion projects of Indian petroleum refineries. The Indian refinery industry has undergone substantial expansion as well as technological changes over the past years. There has been progressive technology upgrading, energy efficiency, better environmental control and improved capacity utilisation. Major reform processes have been set in motion by the government of India: converting the refining industry from a centrally controlled public sector dominated industry to a delicensed regime in a competitive market economy with the introduction of a liberal exploration policy; dismantling the administered price mechanism; and a 25 year hydrocarbon vision. (UK)

Determinants of Iran's BilateralIntra-industry Trade in Pharmaceutical Industry.

Science.gov (United States)

Aghlmand, Siamak; Rahimi, Bahlol; Farrokh-Eslamlou, Hamidreza; Nabilou, Bahram; Yusefzadeh, Hassan

2018-01-01

Among non-oil and in trade arena, drug has always been strategic importance and most government especially industrialized countries pay special attention to its production and trade issues. Thus, having a comprehensive view from economic perspective to this section is essential for suggesting intervention. This was a descriptive-analytical and panel study. In this study, gravity model is used to estimate Iran's bilateral intra-industry trade in pharmaceutical products in the 2001-2012 periods. To illustrate the extent of pharmaceutical's intra-industry trade between Iran and its major trading partners, the explanatory variables of market size, income, factor endowments, distance, cultural contributions, and similarities and also special trade arrangements have been applied. Analysis of factors affecting Iran's bilateral intra-industry trade in pharmaceutical industry showed that the average GDP and cultural similarities had a significant positive impact on Iran's bilateral IIT, while the difference in GDP has a negative and significant effect. Coefficients obtained for the geographical distance and the average ratio of total capital to the labor force is not consistent with theoretical expectations. Special trade arrangements did not have significant impact on the extent of bilateral intra-industry trade between Iran and its trading partners. The knowledge of the intra-industry trade between Iran and its trade partners make integration between the countries. Factors affecting this type of trade pattern underlie its development in trade relationship. Therefore, the findings of this study would be useful in helping to develop and implement policies for the expansion of the pharmaceutical trade.

The Advanced Industrial Materials (AIM) program office of industrial technologies fiscal year 1995

Energy Technology Data Exchange (ETDEWEB)

Sorrell, C.A.

1997-04-01

In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in FY95 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven `Vision Industries` that use about 80% of industrial energy and generated about 90% of industrial wastes. These are: aluminium; chemical; forest products; glass; metal casting; refineries; and steel. OIT is working with these industries, through appropriate organizations, to develop Visions of the desired condition of each industry some 20 to 25 years in the future and then to prepare Road Maps and Implementation Plans to enable them to reach their goals. The mission of AIM has, therefore, changed to `Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`

Rancang bantun industri kecil suku cadang / komponen kulit teknis untuk industri tekstil

OpenAIRE

Suliestiyah Wiryodiningrat; Dwi Asdono Basuki

1995-01-01

The objective of this research is to find out proses of production and relation between cost, Selling price anda break even point (BEP). Product specification is space parts for Textile industries i.e.Picker, Buffer, Bumper leather, Sweel leather, Box front leather, Stick Bumper and Tension brake leather. The production capacity is 700 units per-day, so that in one year is 210.000 units. The economical analysis showed that Total Captal (fixed capital and working capital) =Rp. 149.189.750.00. ...

Industrial statistics with Minitab

CERN Document Server

Cintas, Pere Grima; Llabres, Xavier Tort-Martorell

2012-01-01

Industrial Statistics with MINITAB demonstrates the use of MINITAB as a tool for performing statistical analysis in an industrial context. This book covers introductory industrial statistics, exploring the most commonly used techniques alongside those that serve to give an overview of more complex issues. A plethora of examples in MINITAB are featured along with case studies for each of the statistical techniques presented. Industrial Statistics with MINITAB: Provides comprehensive coverage of user-friendly practical guidance to the essential statistical methods applied in industry.Explores

Industrial processes inventory. Sector 2

International Nuclear Information System (INIS)

1994-01-01

The work objective is to conduct a greenhouse gas emission inventory of the industrial processes in Lebanon for the year 1994. The Lebanese industry has emitted 1924.063 Gg (1.924.063 tons) of Carbon dioxide CO 2 ; 0.0003 Gg (0.3 tons) of carbon monoxide CO; 0.01112 Gg of nitrogen oxide NO; 273.888 tons of non-methane volatile organic compounds and 3.382 Gg (3.382 tons) of sulphur dioxide SO 2 . The cement industry is the major source of CO 2 emissions among the industrial processes in Lebanon. The cement industry is responsible for 76.1% of the total emissions followed by the iron and steel industry which produces 21.68% of the total CO 2 emissions from industrial processes. The NMVOC emissions are mainly produced by the use of asphalt for road paving (98.5% of total emissions by industry) followed by the food and beverage industry (1.2%). The emissions of sulphur dioxide SO 2 come from three industrial sources: the first come from the production of sulphuric acid (69.9% of total industrial emissions), the second from the cement industry (26.4% of total industrial emissions) and the third from the iron and steel mills (3.7% of total industrial emissions). Figures are presented to show the percentage distribution of various industrial sources contributions to CO 2 , NMVOC and SO 2 emissions in Lebanon. Carbon monoxide CO emissions in the industrial sector are very small. The major source is iron and steel mills and the minor source is asphalt-roofing production

Implikasi Yuridis Penyelesaian Perselisihati Hubungan Industrial Melalul Pengadllan Hubungan Industrial

OpenAIRE

Adi, Mila Karmila

2016-01-01

The Industrial Relationship Dispute Resolution Law Number2 Year 2004, has a bolished the existence of The Labor Dispute Committee and replaced by the  Industrial Relation ship Court. The existence of the Industrial Relation ship Court can influence the relation ships here between worker and employer in the future and subtractthe government intervention in labordispute resolution. Although the Court is notexistyet until 2006, but the resolution process will be questioned whether it will give m...

Globalization, crises and industrial policy; Globalizacion, crisis y politica industrial

Energy Technology Data Exchange (ETDEWEB)

Vives, X.

2013-06-01

In this paper we review the fundamentals of industrial policy and its implementation in the European context. We also analyze the relationship between industrial policy and competition policy. (Author) 6 refs.

Energy analysis of 108 industrial processes. Phase 1, industrial applications study

Energy Technology Data Exchange (ETDEWEB)

Hamel, B. B.; Brown, H. L.

1979-06-01

Extensive data are compiled for energy balances in 108 industrial processes. Specific information on unit operation, material, temperature, unrecoverable losses, along with the process flow diagram is given for each of the industries. The following industries are included: meak packing; milk; canned fruits and vegetables; baked goods; sugar refining; soybean; textiles; wood products; building materials; alkalies and chlorine; inorganic gases; pigments, chemicals; plastic materials and resins; synthetic rubbers; organic fibers; pharmaceutical preparations; organic chemicals; petroleum products; fertilizers; rubber products; glass; blast furnaces and steel mills; metals; farm machinery; motor vehicles; and photographic materials. The SIC's for each industry are identified.

Development of Industry-Wide IS Integration Model in the Agri-Industry

DEFF Research Database (Denmark)

Hedman, Jonas; Henningsson, Stefan

2013-01-01

his paper presents a model explaining industrywide information systems (IS) integration in the agri-industry.Using a theoretical frame of value confi guration analysis and IS integration extent we study 15 organizations. We find that product sensitivity, continuous production, value chain captains...... sensitivity and continuous production process led to higher levels of integration......., and value creation logic explain the industry-wide IS integration. Incompatible value creation logic among stakeholders and the lack of presence of “value chain captains” – powerful actors dominating the entire industry - has and negative impact on industry-wide integration. On the other hand, product...

Chemicals-Industry of the Future; Industrial Partnerships: Advancing Energy and Environmental Goals

International Nuclear Information System (INIS)

DOE Office of Industrial Technologies

2001-01-01

This tri-fold brochure describe the partnering activities of the Office of Industrial Technologies' (OIT) Industries of the Future (IOF) for Chemicals. Information on what works for the Chemicals industry, examples of successful partnerships, and benefits of partnering with OIT are included

Glass-Industry of the Future; Industrial Partnerships: Advancing Energy and Environmental Goals

International Nuclear Information System (INIS)

DOE Office of Industrial Technologies

2001-01-01

This tri-fold brochure describe the partnering activities of the Office of Industrial Technologies' (OIT) Industries of the Future (IOF) for Glass. Information on what works for the Glass industry, examples of successful partnerships, and benefits of partnering with OIT are included

Steel-Industry of the Future; Industrial Partnerships: Advancing Energy and Environmental Goals

International Nuclear Information System (INIS)

Jones, A.

2001-01-01

This tri-fold brochure describe the partnering activities of the Office of Industrial Technologies' (OIT) Industries of the Future (IOF) for Steel. Information on what works for the Steel industry, examples of successful partnerships, and benefits of partnering with OIT are included

Aluminum-Industry of the Future; Industrial Partnerships: Advancing Energy and Environmental Goals

International Nuclear Information System (INIS)

Jones, A.

2001-01-01

This tri-fold brochure describe the partnering activities of the Office of Industrial Technologies' (OIT) Industries of the Future (IOF) for Aluminum. Information on what works for the Aluminum industry, examples of successful partnerships, and benefits of partnering with OIT are included

Perspective sources of industrial minerals for building industry in Novohrad (Southern Slovakia

Directory of Open Access Journals (Sweden)

Beláček Boris

1999-03-01

Full Text Available Novohrad a region of Southern Slovakia has wealthy industrial history, which was built mostly on local natural raw materials. Some deposits are exhausted, but other are ready to be exploited. Among such industrial minerals are raw materials for building industry. There are industrial minerals for fine and rough ceramics, stones for building and pavement, sand and gravel. The perspective areas are listed on Tab. 1 - 6 and are shown on Fig 1 - 3.

Implications of nuclear industry globalization for chinese nuclear industry: opportunities and challenges

International Nuclear Information System (INIS)

Guo Zhifeng; Ding Qihua; Wang Zheng

2014-01-01

In recent years, globalization of the world nuclear industry has developed into a new phase. Chinese nuclear industry will be inevitably integrated into this trend. Globalization will bring both positive and adverse effects on Chinese nuclear industry. Facing the fierce competition, Chinese companies must rise to many challenges to enter the global nuclear market. And China need to make scientific decisions and take effective measures in various fields of nuclear industry to realized the goal of global development. (authors)

Technology in industrial buildings; Techniek in bedrijfshallen

Energy Technology Data Exchange (ETDEWEB)

Lam, P. ' t (ed.)

2009-09-15

This thematic issue dedicates 9 articles to provisions in industrial buildings such as air volume, lighting, sound, climate, heating, purification and ventilation: (1) a CO2 emission free distribution centre of Dutch logistic services provider TNT in Veenendaal; (2) the deployment of sustainable techniques in a new industrial building of contractor Klein Poelhuis; (3) energy saving through the use of supporting ventilators in low inducing supply systems (4) the conditioning of large spaces with gas-fired air conditioning equipment; (5) energy efficient lighting in industrial buildings; (6) the deployment of indirectly fired radiant heating; fire prevention by means of sprinkler systems; (8) draught control with industrial air curtains; and (9) energetically sound cooling of industrial and large buildings [mk]. [Dutch] In dit themanummer zijn 9 artikelen gewijd aan omgevingsvoorzieningen in bedrijfshallen, zoals luchtvolume, verlichting, geluid, klimaat, verwarmen, zuiveren en ventilatie: (1) een CO2-emissievrij distributiecentrum van logistiek dienstverlener TNT in Veenendaal; (2) de toepassing van duurzame technieken in een nieuw bedrijfspand van het installatiebedrijf Klein Poelhuis; (3) energiebesparing door het gebruik van ondersteuningsventilatoren bij laag inducerende toevoersystemen; (4) de klimatisering van grote ruimtes met gasgestookte luchtbehandelingsapparatuur; (5) energiezuinige verlichting in bedrijfshallen; (6) de toepassing van indirect gestookte stralingsverwarming; (7) brandpreventie d.m.v. sprinklersystemen; (8) tochtbestrijding met industriele luchtgordijnen; en (9) energetisch verantwoorde koeling van industriele en grote gebouwen.

Industrial Robots.

Science.gov (United States)

Reed, Dean; Harden, Thomas K.

Robots are mechanical devices that can be programmed to perform some task of manipulation or locomotion under automatic control. This paper discusses: (1) early developments of the robotics industry in the United States; (2) the present structure of the industry; (3) noneconomic factors related to the use of robots; (4) labor considerations…

Forest-Industry of the Future; Industrial Partnerships: Advancing Energy and Environmental Goals

International Nuclear Information System (INIS)

DOE Office of Industrial Technologies

2001-01-01

This tri-fold brochure describe the partnering activities of the Office of Industrial Technologies' (OIT) Industries of the Future (IOF) for Forest Products. Information on what works for the Forest Products industry, examples of successful partnerships, and benefits of partnering with OIT are included

Tobacco industry manipulation of the hospitality industry to maintain smoking in public places

Science.gov (United States)

Dearlove, J; Bialous, S; Glantz, S

2002-01-01

Objective: To describe how the tobacco industry used the "accommodation" message to mount an aggressive and effective worldwide campaign to recruit hospitality associations, such as restaurant associations, to serve as the tobacco industry's surrogate in fighting against smoke-free environments. Methods: We analysed tobacco industry documents publicly available on the internet as a result of litigation in the USA. Documents were accessed between January and November 2001. Results: The tobacco industry, led by Philip Morris, made financial contributions to existing hospitality associations or, when it did not find an association willing to work for tobacco interests, created its own "association" in order to prevent the growth of smoke-free environments. The industry also used hospitality associations as a vehicle for programmes promoting "accommodation" of smokers and non-smokers, which ignore the health risks of second hand smoke for employees and patrons of hospitality venues. Conclusion: Through the myth of lost profits, the tobacco industry has fooled the hospitality industry into embracing expensive ventilation equipment, while in reality 100% smoke-free laws have been shown to have no effect on business revenues, or even to improve them. The tobacco industry has effectively turned the hospitality industry into its de facto lobbying arm on clean indoor air. Public health advocates need to understand that, with rare exceptions, when they talk to organised restaurant associations they are effectively talking to the tobacco industry and must act accordingly. PMID:12034999

Management of logistics chains of industrial enterprises in high-tech industries

Directory of Open Access Journals (Sweden)

Demchenko Alexander

2017-01-01

Full Text Available The article analyses the trends of high-tech industries development in the market globalization conditions. The economic growth of high-tech industries largely depends on technological innovations, products and equipment based on usage of the results of applied and fundamental scientific researches. It is shown that characteristics of high-tech productions influence the logistics chain structure. It justifies the importance to include partnering enterprises taking part in creation of intellectual and tangible assets in the logistic chain of the industrial enterprise. It is noted that development of production technologies contributes to formation of innovative logistic chains, which participants are enterprises cooperating for achievement of competitive power. The article offers a model of an industry logistic chain comprising the conventional logistic chain and innovative logistic chains corresponding to the industry market segments. It is proposed to use the customer value of the manufactured products as a criterion of the industrial enterprise’s logistic chains management efficiency. Implementation of the offered model of cooperation between the logistic chain participants is aimed at creation of a continuous innovations flow, reduction of technological development costs and uniting of the participants’ experience.

Educational aspects of industrial radiography

International Nuclear Information System (INIS)

Krishnamurthy, K.; Wamorkar, R.R.; Singh, G.

1979-01-01

The state of art of training and education in non-destructive testing in India, with special reference to industrial radiography is reviewed. Basic requirement of industry and potential of radioisotopes in industrial inspection are also described. Need for an organised training programme in industrial isotope radiography to exploit potentials for benefit of industry concurrent with the safety is stressed. A comprehensive training programme tailored to meet the needs of Indian industry is outlined. Benefits obtained from the course to the industry since the beginning of the training programme are briefly reviewed. (auth.)

Minerals industry survey, 1984

Energy Technology Data Exchange (ETDEWEB)

1984-01-01

This is the seventh edition of the statistical survey commissioned by the Australian Mining Industry Council. It represents the most comprehensive review of the financial position of the Australian minerals industry and provides timely financial data on the minerals industry. The tables of this survey have been prepared for AMIC by Coopers and Lybrand, Chartered Accountants, based on information supplied to them in confidence by the respondent companies. For the purpose of the survey, the minerals industry has been defined as including exploration for, and extraction and primary processing of, minerals in Australia. The oil and gas industry is not included.

An outline of the Dutch chemical industry and petrochemical industry

International Nuclear Information System (INIS)

Heesen, Th.J.; Terwoert, J.; Hoefnagels, F.

1996-03-01

An overview is given of the most important processes and products of the chemical and petrochemical industry in the Netherlands. Also attention is paid to the material balance and the energy balance of those industries. refs

China's Expansion Into and U.S. Withdrawal from Argentina's Telecommunications and Space Industries and the Implications for U.S. National Security

National Research Council Canada - National Science Library

Hulse, Janie

2007-01-01

... up. In this monograph, Ms. Janie Hutse, a Latin Amen can specialist based in Buenos Aires, Argentina, argues that increased Chinese investment in regional telecommunications and space industries has implications for U.S. national security...

76 FR 54794 - Klaussner Furniture Industries, Inc., Plant #3, Asheboro, NC; Klaussner Furniture Industries, Inc...

Science.gov (United States)

2011-09-02

...,989B] Klaussner Furniture Industries, Inc., Plant 3, Asheboro, NC; Klaussner Furniture Industries, Inc... of Klaussner Furniture Industries, Inc., Milford, IA; Amended Certification Regarding Eligibility To... Industries, Inc., Plant 3, Asheboro, North Carolina (TA-W- 70,989) and Klaussner Furniture Industries, Inc...

Proposed industrial recovered materials utilization targets for the metals and metal products industry

Energy Technology Data Exchange (ETDEWEB)

None

1979-05-01

Set targets for increased utilization of energy-saving recovered materials in the metals and metal products industries (ferrous, aluminium, copper, zinc, and lead) are discussed. Data preparation and methodology development and analysis of the technological and economic factors in order to prepare draft targets for the use of recovered materials are covered. Chapter 2 provides an introductory discussion of the factors that affect the recovery and reuse of secondary materials and the competition between the primary and secondary metals industries. Chapter 3 presents general profiles for the major industrial segments comprising SIC 33, including industry structure, process technology, materials and recycling flow, and future trends for the 5 industries: ferrous, aluminium, copper, zinc, and lead. Chapter 4 presents the evaluation of recycling targets for those industries. (MCW)

The "We Card" program: tobacco industry "youth smoking prevention" as industry self-preservation.

Science.gov (United States)

Apollonio, Dorie E; Malone, Ruth E

2010-07-01

The "We Card" program is the most ubiquitous tobacco industry "youth smoking prevention" program in the United States, and its retailer materials have been copied in other countries. The program's effectiveness has been questioned, but no previous studies have examined its development, goals, and uses from the tobacco industry's perspective. On the basis of our analysis of tobacco industry documents released under the 1998 Master Settlement Agreement, we concluded that the We Card program was undertaken for 2 primary purposes: to improve the tobacco industry's image and to reduce regulation and the enforcement of existing laws. Policymakers should be cautious about accepting industry self-regulation at face value, both because it redounds to the industry's benefit and because it is ineffective.

Proposed industrial recovered materials utilization targets for the metals and metal-products industry

Energy Technology Data Exchange (ETDEWEB)

None

1979-05-01

The introductory chapter provides a discussion of the factors that affect the recovery and reuse of secondary materials and the competition between the primary and secondary metals industries. It discusses these industries in terms of resource characteristics, industry technology, pollution control requirements, market structure, the economics of recycling, and the issues involved in econometrically estimating scrap supply response behavior. It further presents the methodology established by DOE for the metals, textiles, rubber, and pulp and paper industries. The areas in which government policies might have a significant impact on the utilization of primary and secondary metals and on any recycling targets between now and 1987 are noted. Chapter 3 presents general profiles for the major industrial segments comprising SIC 33. The profiles include such topics as industry structure, process technology, materials and recycling flow, and future trends. Chapter 4 specifically covers the evaluation of recycling targets for the ferrous, aluminum, copper, zinc, and lead industries. (MCW)

Renewable raw materials in the field of industry; Nachwachsende Rohstoffe in der Industrie

Energy Technology Data Exchange (ETDEWEB)

Peters, D.

2006-07-01

Being used to the practiced processing of raw materials for many decades the industry had to tap the advantage of renewable raw materials again. Conventional processing methods had to be changed and to be newly developed. This has been a rewarding task considering the ecological advantages but also considering the interesting markets for products based upon renewable raw materials. Today the German industry above all the chemical industry again processes agricultural and forestal raw materials to a considerable extent. Ten percent of the raw materials processed by the chemical industry are renewable. The wood processing industry is an important economic sector that achieves a value creation with the raw material wood exceeding the value creation of other industries by far. This brochure gives an overview of the possible substances, which are processed from renewable raw materials in Germany and it shows the important role that agricultural raw materials and wood already play for the industry nowadays. (orig.)

Spatial Diffusion of Leather Industries (Case Study at Magetan District

Directory of Open Access Journals (Sweden)

Dilahur Dilahur

2004-01-01

Full Text Available After the rise and the fall of the tides and the change of the activities as the phenomena which happen in the daily life of sociaety, the hange of spacing or distributionn of industrial businesses becomes one of the new phenomena. The objective of this research is to know the process of the diffusion from leather industry in Magetan Subdistrict. This research uses secondary data analysis and direct observation. The result of this research shows that the change (the rise and fall of the tides in leather industry has producted the movement of distribution or spacing in which the center of the main production is declined and the new center may arise. In this movement, it seems that the existence of the specification on types of activity, like having similar leather, shoescraft, beltcraft, and sendalcraft become the serious phenomena. This kind of the change and its development is signed by the change of position from becoming employee to be new employer, having some employees that may become the employers at any time and so forth. The style of the diffusion which happen is the style of mixing diffusion in which the business on leather industry becomes wider reaching around the village while the original village (Kauman is still as the center of industry, although it has so limited activities because the business is always declined.

A room acoustical computer model for industrial environments - the model and its verification

DEFF Research Database (Denmark)

Christensen, Claus Lynge; Foged, Hans Torben

1998-01-01

This paper presents an extension to the traditional room acoustic modelling methods allowing computer modelling of huge machinery in industrial spaces. The program in question is Odeon 3.0 Industrial and Odeon 3.0 Combined which allows the modelling of point sources, surface sources and line...... of an omnidirectional sound source and a microphone. This allows the comparison of simulated results with the ones measured in real rooms. However when simulating the acoustic environment in industrial rooms, the sound sources are often far from being point like, as they can be distributed over a large space...

Energy efficiency programs and policies in the industrial sector in industrialized countries

Energy Technology Data Exchange (ETDEWEB)

Galitsky, Christina; Price, Lynn; Worrell, Ernst

2004-06-01

About 37% of the primary energy consumed both in the U.S. and globally is used by the industrial sector. A variety of energy efficiency policies and programs have been implemented throughout the world in an effort to improve the energy efficiency of this sector. This report provides an overview of these policies and programs in twelve industrialized nations and the European Union (EU). We focus on energy efficiency products and services that are available to industrial consumers, such as reports, guidebooks, case studies, fact sheets, profiles, tools, demonstrations, roadmaps and benchmarking. We also focus on the mechanisms to communicate the availability and features of these products and services and to disseminate them to the industrial consumers who can use them. Communication channels include customer information centers and websites, conferences and trade shows, workshops and other training mechanisms, financial assistance programs, negotiated agreements, newsletters, publicity, assessments, tax and subsidy schemes and working groups. In total, over 30 types of industrial sector energy efficiency products, services and delivery channels have been identified in the countries studied. Overall, we found that the United States has a large variety of programs and offers industry a number of supporting programs for improving industrial energy efficiency. However, there are some products and services found in other industrialized countries that are not currently used in the U.S., including benchmarking programs, demonstration of commercialized technologies and provision of energy awareness promotion materials to companies. Delivery mechanisms found in other industrialized countries that are not employed in the U.S. include negotiated agreements, public disclosure and national-level tax abatement for energy-efficient technologies.

Urban planning and industry in Spain: A novel methodology for calculating industrial carbon footprints

International Nuclear Information System (INIS)

Zubelzu, Sergio; Álvarez, Roberto

2015-01-01

In this paper we present a methodology for calculating the carbon footprint of the industrial sector during the urban planning stage in order to clearly develop and implement preventive measures. The methodology created focuses on industrial urban planning procedures and takes into account urban infrastructure in the characterization of GHG emissions. It allows for the implementation of preventive measures based on sustainability design criteria. The methodology was derived for specific industrial activity categories and was tested on a group of municipalities in a province south of Madrid, Spain. The results indicate that the average carbon footprint of industrial activities varies between 137.36 kgCO 2eq /m 2 e and 607.25 kgCO 2eq /m 2 e depending on the activity. Gas and electricity are the most important emissions sources for the most polluting industrial activities (chemical and nonmetal mineral products), while transportation is the most important source for every other activity. Municipalities can have a decisive influence on the industrial carbon footprint because, except for waste management and two industrial activities related to electricity, the majority of reductions can be achieved through urban planning decision variables. -- Highlights: •Model to calculate industrial carbon footprint in urban planning stage is proposed. •Specific industrial activities planned have a strong effect on carbon footprint. •Gas and electricity are the most relevant sources for the most pollutant industries. •Transport is relevant source for the less pollutant industries. •Municipalities can decisively influence on industrial carbon footprint

KEUNGGULAN KOMPETITIF INDUSTRI KECIL DI KLASTER INDUSTRI KECIL TRADISIONAL DENGAN PENDEKATAN BERBASIS SUMBER DAYA: STUDI KASUS PENGUSAHA INDUSTRI KECIL LOGAM KIARA CONDONG, BANDUNG

Directory of Open Access Journals (Sweden)

Widjajani Widjajani

2008-01-01

Full Text Available Small-scale industries play an important role in the betterment of society. Industrial cluster approach has been used by government as an alternative government policy to increase competitiveness of small-scale industries in Indonesia. An industry cluster consists of core enterprise(s and related enterprises in which the core acts as a pulling agent for the other counterparts. Therefore, developing the core enterprises is expected to increase competitiveness of the whole cluster. This research is a strategy process research, aiming at identifying and modeling strategic behavior of a successful entrepreneur in a metal-making cluster industry at Kiara Condong Bandung, West Java. Based on the literature review, qualitative research methodology is used in this research by combining soft systems methodology (SSM and grounded theory. The major findings of this research indicate four kinds of strategic behavior models, namely behavior model of strategy setting, behavior model of production operations, behavior model of research and development and innovation and behavior model of marketing operations. Abstract in Bahasa Indonesia: Industri kecil mempunyai peranan penting dalam meningkatkan kesejahteraan masyarakat. Pendekatan klaster industri dicanangkan oleh pemerintah sebagai alternatif kebijakan pemerintah untuk membangun keunggulan kompetitif di industri kecil. Di suatu klaster industri kecil yang terdiri dari unit usaha inti dan unit usaha penunjang, unit usaha inti merupakan gerbong penghela klaster. Oleh karena itu mengembangkan usaha inti sehingga mempunyai keunggulan kompetitif diharapkan dapat mengembangkan klaster secara keseluruhan. Penelitian ini merupakan penelitian proses strategi (strategy process research yang meneliti perilaku strategis manajer pemilik industri kecil dalam mengelola usahanya untuk membangun keunggulan kompetitif dengan pendekatan berbasis sumber daya (Resource-Based View atau RBV dan mengambil studi kasus pengusaha

International Symposium on the Industrial Applications of the Mössbauer Effect

CERN Document Server

Kuzmann, E; ISIAME 2008

2009-01-01

Proceedings of the International Symposium on the Industrial Applications of the Mössbauer Effect (ISIAME 2008) held in Budapest, Hungary, 17-22 August 2008 E. Kuzmann and K. Lázár (Eds.) This book provides an excellent overview on the most recent results on the industrial applications of Mössbauer spectroscopy attained on the fields of nanotechnology, metallurgy, biotechnology and pharmaceutical industry, applied mineralogy, energy production industry (coal, oil, nuclear, solar, etc.), computer industry, space technology, electronic and magnetic devices technology, ion implantation technology, including topics like characterization of novel construction materials, electronic components and magnetic materials, composite materials, colloids, amorphous and nanophase materials, small particles, coatings, interfaces, thin films and multilayers, catalysis, corrosion, tribology, surface modification, hydrogen storage, ball milling, radiation effects, electrochemistry, batteries, etc. From the various reports a ...

Radon space techniques for the evaluation of industrial tomography systems

International Nuclear Information System (INIS)

Burge, R.E.; Wombell, R.J.; Belchamber, R.M.; Betteridge, D.; Lilley, T.

1987-01-01

Computerised tomography (CT) is a powerful tool in medicine, and would be well suited to a wide range of industrial applications, particularly non-destructive testing. However, the very diversity of uses makes the production of a standardised scanner impossible. Systems for an industrial use will have to be designed with a problem in mind. An approach is presented for the analysis of CT scanning systems to help in the design problem. It first describes a system in terms of the sampling of the Radon transform of the object and then uses this information to produce a spatial description of the performance of a scanning system in terms of data collection. This description is called a resolution map and it is shown how the resolution map can be related to the object under study. (author)

Industrial policy of the ministry of industry, energy and tourism. re-industrialization, competitiveness and job creation; La polititica industrial del Ministerio de Industria, energia y turismo. Reindustrializacion, competitividad y creacion de empleo

Energy Technology Data Exchange (ETDEWEB)

Valero Artola, L.

2013-06-01

Today, the period of financial crisis and economic recession has led to a general rethinking of economic policy and, in particular, of industrial policy. In addition, there is a full consensus about the importance of a competitive industrial sector for the economy as a whole. Consequently, the European Union has identified the industrial policy as a strategic priority, which has to be based on these four pillars: innovation, internal market, access to credit and human capital. Spain, in line with the EU, has also reviewed its industrial policy, identifying the recovery of the industry share of the GDP as a fundamental objective. This goal will be achieved by an active industrial policy, including structural reforms and the promotion of a competitive industry with high added value and ability to compete in foreign markets and to generate qualified employment.

Historicism and Industry Emergence

DEFF Research Database (Denmark)

Kirsch, David; Moeen, Mahka; Wadhwani, Dan

2014-01-01

Management and organization scholars have increasingly turned to historical sources to examine the emergence and evolution of industries over time. This scholarship has typically used historical evidence as observations for testing theoretically relevant processes of industry emergence....... In this chapter, an alternative approach is explored that focuses on reconstructing causes and processes that time and theory have erased. The emergence of three industries—plant biotechnology, savings banking, and the automobile—shows how time, along with prevailing functional models of industry evolution, leads...... excluded phenomena and explanations, reconstructing uncertainty and alternative paths of industry emergence, and studying the processes of information elision and exclusion in the formation of industry knowledge....

Minerals industry survey 1987

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

This is the eleventh Minerals Industry Survey produced by the Australian Mining Industry Council. It represents an invaluable time series on the minerals industry's financial performance, as well as an up to date description of the industry for the latest financial year. The survey has been conceived as a supplement to and expansion of the various Australian Bureau of Statistics and Bureau of Mineral Resources, Geology and Geophysics publications which describe the exploration, mining and smelting and refining industries in Australia. The tables in this survey have been prepared by Coopers and Lybrand, Chartered Accountants, based on information supplied to them in confidence by the respondent companies.

Advanced Industrial Materials Program

Science.gov (United States)

Stooksbury, F.

1994-06-01

The mission of the Advanced Industrial Materials (AIM) program is to commercialize new/improved materials and materials processing methods that will improve energy efficiency, productivity, and competitiveness. Program investigators in the DOE national laboratories are working with about 100 companies, including 15 partners in CRDA's. Work is being done on intermetallic alloys, ceramic composites, metal composites, polymers, engineered porous materials, and surface modification. The program supports other efforts in the Office of Industrial Technologies to assist the energy-consuming process industries. The aim of the AIM program is to bring materials from basic research to industrial application to strengthen the competitive position of US industry and save energy.

Prevalence of bile duct cancer among printing industry workers in comparison with other industries.

Science.gov (United States)

Okamoto, Etsuji; Kikuchi, Kiyotaka; Endo, Ginji

2013-01-01

The aim of this study was to assess the risk of developing bile duct cancer among workers in the other printing industry in comparison with workers in all industries in general. Prevalence of bile duct cancer was compared between workers in the printing industry and age-standardized controls in all other industries using the claims database of the Japan Health Insurance Association, which insures workers of small-medium sized employers of all industries. Young (aged 30-49) male workers in the printing industry showed an elevated but insignificant standardized prevalence rate ratio (SPRR) for bile duct cancer in comparison with workers in all other industries (SPRR: 1.78; 95%CI: 0.63-5.00). The risk was higher for intrahepatic bile duct cancer but remained insignificant (SPRR: 3.03; 95%CI: 0.52-17.56). The sharply elevated risk of bile duct cancer observed among proof-printing workers of a printing factory in Osaka may not be generalizable to workers in the printing industry nationwide.

Social cost benefit analysis of sustainable industrial areas

International Nuclear Information System (INIS)

Blom, M.J.; Schroten, A.

2010-05-01

In restructuring a industrial park many different interests are involved, such as space, business climate, environmental quality or landscape. The social cost-benefit analysis (SCBA) is a tool for mapping all current and future pros and cons (expressed in Euros) of a restructuring project for society as a whole as objective as possible. The SCBA manual for sustainable industrial parks describes how an SCBA can be performed and how the results could accommodate decisions made. SCBA pilots have been carried out for restructuring projects in four Dutch municipalities: Katwijk, Rijnwoude, Hardinxveld-Giessendam and Westland. [nl

Industry Platforms and New Industrial Policy in Russia

OpenAIRE

Svetlana V. Orekhova

2017-01-01

The article aims at clarifying Russian industrial policy as a result of business models changing and market reconstruction. The research bass on the hypothesis that the choice of the industrial policy administrative measures depends on the object of management. It is important to link government regulation of markets with corporate strategies. We reveal that modern economic systems based on using of electronic technologies, big data, and innovative activity. Technological platforms as the sin...

Dynamics of Price-Cost Margins in the U.S. Meat Industry

OpenAIRE

Chidmi, Benaissa; Fadiga, Mohamadou L.

2007-01-01

This study analyses the stochastic behavior of price-cost margins (PCMs) in the U.S. meat industry. It, first, develops and estimates a vertical relationship economic model to derive PCMs in the U.S. meat industry (Beef, Pork, and Poultry). Second it analyzes the behavior of PCMs by decomposing them into their seasonal, cyclical, and trend components using the state-space and the Kalman filtering methods. Price-cost margins in the U.S. meat industry are governed by two common trends and two c...

14 CFR 375.41 - Agricultural and industrial operations within the United States.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Agricultural and industrial operations... Agricultural and industrial operations within the United States. Foreign civil aircraft shall not be used for such commercial air operations as crop dusting, pest control, pipeline patrol, mapping, surveying...

Determinants of Iran’s Bilateral Intra-industry Trade in Pharmaceutical Industry

Science.gov (United States)

Aghlmand, Siamak; Rahimi, Bahlol; Farrokh-Eslamlou, Hamidreza; Nabilou, Bahram; Yusefzadeh, Hassan

2018-01-01

Among non-oil and in trade arena, drug has always been strategic importance and most government especially industrialized countries pay special attention to its production and trade issues. Thus, having a comprehensive view from economic perspective to this section is essential for suggesting intervention. This was a descriptive-analytical and panel study. In this study, gravity model is used to estimate Iran’s bilateral intra-industry trade in pharmaceutical products in the 2001-2012 periods. To illustrate the extent of pharmaceutical’s intra-industry trade between Iran and its major trading partners, the explanatory variables of market size, income, factor endowments, distance, cultural contributions, and similarities and also special trade arrangements have been applied. Analysis of factors affecting Iran’s bilateral intra-industry trade in pharmaceutical industry showed that the average GDP and cultural similarities had a significant positive impact on Iran’s bilateral IIT, while the difference in GDP has a negative and significant effect. Coefficients obtained for the geographical distance and the average ratio of total capital to the labor force is not consistent with theoretical expectations. Special trade arrangements did not have significant impact on the extent of bilateral intra-industry trade between Iran and its trading partners. The knowledge of the intra-industry trade between Iran and its trade partners make integration between the countries. Factors affecting this type of trade pattern underlie its development in trade relationship. Therefore, the findings of this study would be useful in helping to develop and implement policies for the expansion of the pharmaceutical trade. PMID:29881438

Linking Food Industry and Agriculture: The Case of Fruit-Juice Industry and Korean Food Franchise

OpenAIRE

Kim, Sounghun; Choi, Ji-Hyeon

2008-01-01

In Korea, the portion of food industry has increased, while the portion of agriculture keeps decreasing. The alliance between agriculture and food industry results in the synergy between both industries as well as higher farmers' income. The goal of this study is to analyze the current status of the linkages between two food industries (fruit-juice industry and Korean-style meal franchise industry) and agriculture, and then to present the ways to strengthen the linkages. The discussion in thi...

Industrial engineering curriculum in industry 4.0 in a South African context

Directory of Open Access Journals (Sweden)

Sackey, Samuel Mensah

2016-12-01

Full Text Available With its potential to change significantly the knowledge and skill-set requirements for industrial engineers (IEs, Industry 4.0 creates a need to reassess the place of IEs to avoid a greater shock than that caused by the information technology identity crisis of the 1990s. This article examines the likely impacts of Industry 4.0 on industrial engineering (IE and proposes enhancements to IE curricula in South Africa. Research methods include a literature review, a study of IE curricula, and a questionnaire survey of IE programmes. Results indicate that several IE functions might become somewhat transformed, less visible, or downright diminished in Industry 4.0. Emphasis has shifted from traditional IE methods to data-driven functions and cyber-physical systems. The developing mismatch needs correcting by emphasising skills such as ‘big data’ analytics and novel human-machine interfaces in IE curricula. Only one university in South Africa has made progress towards the adoption of an Industry 4.0 infrastructure. The authors propose a set of curriculum enrichment items as the basis for reform.

Hands on Education Through Student-Industry Partnerships

Science.gov (United States)

Brown, J.; Wolfson, M.; Morris, K.

2013-09-01

Lockheed Martin Space Systems Company has invested in the future generation of engineers by partially funding and mentoring CubeSat projects around the country. One CubeSat in particular, ALL-STAR, has shown how this industry/university partnership benefits both the students and their mentors. Students gain valuable insight into aspects of spacecraft design that aren't taught in classes. They also start learning about industry processes for designing, building, and testing satellites before ever working in that environment. Because of this experience, industry is getting more qualified engineers starting fresh out of college. In addition Lockheed Martin's partnership with the university will allow them to use the students to help build affordable CubeSats for internal and customer's research and development projects. The mentoring also challenges the engineers to think differently about similar problems they face every day with their larger programs in order to make the solution simple and affordable.

JAIF's 23rd nuclear industry survey: strengthening industrial foundations under low economic growth

International Nuclear Information System (INIS)

Anon.

1983-01-01

Each year since the beginning of nuclear development in Japan, Japan Atomic Industrial Forum has conducted the survey of the nuclear-related aspects in mining and manufacturing industries, electric utilities, trading firms, etc., regarding their expenditures, sales and personnel. The results of the 23rd survey for fiscal 1981 (April, 1981, to March, 1982,) are described. The salient points in the year, as compared with fiscal 1980, are as follows: (trend in expenditures) nuclear-related expenditures exceeded yen2 trillion, up 12 %; the operation and maintenance costs of electric utilities varied, but overall, up 25 %; the nuclear-related expenditures of mining and manufacturing industries were up 34 %; (trend in sales) the new record in mining and manufacturing industries - the sales topped yen1 trillion; the sales of reactor equipments rose by 59 %; the sales by mining and manufacturing industries to electric utilities up 42 %; the nuclear-related exports of mining and manufacturing industries grew by 13 %; the revenues and sales exceeded the expenditures in mining and manufacturing industries. (Mori, K.)

Market potential for solar thermal energy supply systems in the United States industrial and commercial sectors: 1990--2030

International Nuclear Information System (INIS)

1991-12-01

This report revises and extends previous work sponsored by the US DOE on the potential industrial market in the United States for solar thermal energy systems and presents a new analysis of the commercial sector market potential. Current and future industrial process heat demand and commercial water heating, space heating and space cooling end-use demands are estimated. The PC Industrial Model (PCIM) and the commercial modules of the Building Energy End-Use Model (BEEM) used by the DOE's Energy Information Administration (EIA) to support the recent National Energy Strategy (NES) analysis are used to forecast industrial and commercial end-use energy demand respectively. Energy demand is disaggregated by US Census region to account for geographic variation in solar insolation and regional variation in cost of alternative natural gas-fired energy sources. The industrial sector analysis also disaggregates demand by heat medium and temperature range to facilitate process end-use matching with appropriate solar thermal energy supply technologies. The commercial sector analysis disaggregates energy demand by three end uses: water heating, space heating, and space cooling. Generic conceptual designs are created for both industrial and commercial applications. Levelized energy costs (LEC) are calculated for industrial sector applications employing low temperature flat plate collectors for process water preheat; parabolic troughs for intermediate temperature process steam and direct heat industrial application; and parabolic dish technologies for high temperature, direct heat industrial applications. LEC are calculated for commercial sector applications employing parabolic trough technologies for low temperature water and space heating. Cost comparisons are made with natural gas-fired sources for both the industrial market and the commercial market assuming fuel price escalation consistent with NES reference case scenarios for industrial and commercial sector gas markets

Water requirements of selected industries

Science.gov (United States)

,; Mussey, Orville D.; Conklin, Howard L.; Durfor, Charles N.; Otts, Louis Ethelbert; Walling, Faulkner B.

1955-01-01

The early industries in America generally were established when and where demands for the products of industry arose. Most of the early industries were so located that their increasing requirements for transportation, raw materials, market, labor, and water supply could be satisfied economically. Many of these original plant locations have continued as modern industrial centers and their output has increased manyfold in meeting the demands of our growing Nation. The recent and current industrial expansion and the trend toward the growth of chemical industries, many Of which are heavy users of water, has resulted in a tremendous increase in the total withdrawal of water for industrial use as well as a large increase in the per capita use of water. This increase in industrial water requirement has strained the capacity of the developed water supplies in many areas, and in some instances the adequacy of the potential water supplies is questionable. The Geological Survey is engaged in preparing and publishing a series of reports describing the developed and undeveloped water resources of many important industrial areas. This work was started initially at the request of the National Securities Resources Board as a means to insure that water supplies are adequate for our rapidly expanding industrial development. Although many factors contribute to establishing the feasibility or even the limits of future industrial development, the one relating to available water supply is extremely important. A knowledge of the water requirements of various industries is valuable therefore in planning the logical development in any area where water supply is a critical factor. Thus far very little suitable information on the water requirements of our major industries is available for general planning. An inventory of unit water-use values in industry therefore would be generally helpful and also might tend to stimulate water-conservation methods. To obtain such information

Industry outreach a status report

Energy Technology Data Exchange (ETDEWEB)

Surek, D.; Sen, R. [R.K. Sen & Associates, Inc., Bethesda, MD (United States)

1995-09-01

The Outreach Project was initiated in October 1994 with the objective of developing a multi-year plan for the U.S. Department of Energy (DOE) for targeted outreach activities for stakeholders in industry and the general public. This status report summarizes the work on industry outreach that has been completed since the inception of the project in October 1994. A three-pronged approach was taken to ascertain issues related to industry outreach. First, there was a review of on-going and past industry outreach activities at DOE and NHA. Next, a series of meetings with industry decision makers was arranged to get a better understanding of industry interests and concerns, and to discuss how DOE and industry could work collaboratively to develop hydrogen energy systems. Third, a workshop is scheduled where representatives from industry, DOE and other federal agencies can identify issues that would enhance partnering between the federal government and industry in the development of hydrogen energy systems. At this tiny, the review of on-going and past activities has been completed. Industry interviews are in progress and a majority of meetings have been held. Analysis of the information gained is in progress. The preliminary analysis of this information indicates that for appropriate near-term demonstration-type projects, the level of interest for collaboration between DOE and industry is high. The data also identifies issues industry is concerned with which impact the commercialization of hydrogen energy systems.

The Impact of the Defense Industry Consolidation on the Aerospace Industry

National Research Council Canada - National Science Library

Davis, Judy B

2006-01-01

... (SIC) codes. Using the structure-conduct- performance paradigm, a method in industrial organization, this thesis focused on how the defense consolidation affected the structure and behavior of the aerospace industry...

Benchmarking and industry performance

NARCIS (Netherlands)

Ten Raa, T.

2011-01-01

In this paper I interrelate productivity analysis and the theory of industrial organization. A proposition proves that an industrial organization is efficient if and only if it is supportable in the entry-proofness sense. Industrial performance is decomposed in efficiency and technical change terms

Uranium industry annual 1994

International Nuclear Information System (INIS)

1995-01-01

The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ''Uranium Industry Annual Survey.'' Data collected on the ''Uranium Industry Annual Survey'' (UIAS) provide a comprehensive statistical characterization of the industry's activities for the survey year and also include some information about industry's plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ''Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,'' is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2

Collusion in the Dutch construction industry: an industrial organization perspective

NARCIS (Netherlands)

Doree, Andries G.

2004-01-01

Several investigations by parliament, cabinet, justice and antitrust authorities have shown a widespread use of cartels and structural bid rigging within the Dutch construction industry. The reputation of the Dutch construction industry has been dented with both the general public and clients. As a

Competitiveness of the Garment Industry on the Basis of the Industrial Cluster Establishment

Directory of Open Access Journals (Sweden)

Tatiana Dmitrievna Sinyavets

2016-03-01

Full Text Available The issue of the development prospects of the Russian economy and the economy of its individual branches in the regions is highly relevant in terms of the increasing crises and economic development challenges. The scope of the study is a garment industry of the Siberian Federal District, which includes 12 subjects, and only six of them develop the garment industry actively. There are the regions of Kemerovo, Novosibirsk, Omsk, Tomsk, Krasnoyarsk Krai and the Republic of Khakassia. The subject matter of the research is the state and prospects of the garment industry of the Siberian Federal District. It also includes the assessment of the garment industry as one of the sub-sectors of the light industry in terms of its competitiveness in the domestic market. The purpose of the comprehensive study is to determine the conditions and factors affecting the development of the industry, as well as to identify its development reserves and competitiveness on the basis of industrial cluster’s generation. The hypothesis of this study is that in the Siberian Federal District, there are a need and reserves to create a cluster of the garment industry. The main methods of the study are the comparative analysis, the expert assessment of the sector in certain regions of the Siberian Federal District, as well as the assessment of possible formation of the industrial cluster in the region. The results of the study are the evaluation of the competitiveness and prospects of the garment industry in Russia and the Siberian Federal District (a low level of development and competitiveness; the evaluation of the development level of the garment industry in the Federal District, which have showed the demand for apparel products from the population and enterprises, as well as the conditions for the provision of clothing manufacture with natural fabrics and synthetic materials, labor resources and research and development achievements; also the justification of the existing

Conditions for industrial production

DEFF Research Database (Denmark)

Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe; Brauer, H.

1996-01-01

The possibility of an industrial aerogel glazing production is discussed with respect to sample size, sales volume and prices. Different ways of an industrial assembling line is outlined and the total costs of a 1 square meter aerogel glazing is calculated.......The possibility of an industrial aerogel glazing production is discussed with respect to sample size, sales volume and prices. Different ways of an industrial assembling line is outlined and the total costs of a 1 square meter aerogel glazing is calculated....

ANALISIS SISTEM PENGEMBANGAN KAWASAN INDUSTRI TERPADU BERWAWASAN LINGKUNGAN: STUDI KASUS DI PT. KAWASAN INDUSTRI MEDAN (Analysis System of Integrated Industrial Estate Ecodevelopment Case Study: At PT. Medan Industrial Estate

Directory of Open Access Journals (Sweden)

Kimberly Febrina Kodrat

2011-07-01

Full Text Available ABSTRAK Tujuan utama penelitian adalah menganalisis kinerja pengembangan kawasan industri terpadu berwawasan lingkungan. Cakupan aspek penelitian disinkronkan dengan konsep pembangunan berkelanjutan sekaligus dijadikan sebagai batasan kajian, yakni mempersekutukan aspek ekonomi, ekologi dan sosial. Data diperoleh dengan menggunakan metode survei melalui observasi, wawancara mendalam, dan pendapat pakar. Metodologi penelitian menggunakan metode survei dengan menggunakan perpaduan antara hard system (analisis sistem dinamis dan soft system (analisis prospektif. Dari hasil uji statistik chi square (α = 0,01 diperoleh bahwa kelompok masyarakat yang bekerja di dalam PT. KIM mempunyai hubungan yang sangat signifikan dengan kelompok masyarakat yang bekerja di luat PT. KIM terhadap tingkat pendapatan, tingkat pendidikan dan faktor usia. Berdasarkan hasil analisis kualitas limbah cair unit IPAL PT. KIM terdapat 5 parameter yang masih berada diatas nilai baku mutu KepMenLHNo.51/1997, yaitu: BOD, COD, TSS, klorida dan amoniak. Tingkat efisiensi pengolahan limbah cair unit IPAL PT. KIM rata-rata 53,07%. Hasil analisis ketergantungan antar faktor dengan menggunakan Analisis Prospektif diperoleh sebanyak 5 faktor strategis masa depan yang mempengaruhi pengembangan kawasan industri terpadu berwawasan lingkungan, yaitu: jumlah industri, permintaan lahan, kebijakan pemerintah, model pengembangan, dan iklim investasi yang kondusif. Pengembangan kawasan industri terpadu berwawasan lingkungan dapat dilakukan dengan strategi moderat dengan kebijakan mencakup jumlah industri bertambah secara bertahap dengan meningkatnya permintaan lahan serta kebijakan pemerintah yang memfasilitasi peningkatan modal pengembangan dan didukung oleh iklim investasi yang kondusif. ABSTRACT The main purpose of the research is to study environmental aspect of industrial estate development. The scope of the research aspects is synchronized with sustainable development concepts, namely

Industrial ceramics

International Nuclear Information System (INIS)

Mengelle, Ch.

1999-04-01

After having given the definition of the term 'ceramics', the author describes the different manufacturing processes of these compounds. These materials are particularly used in the fields of 1)petroleum industry (in primary and secondary reforming units, in carbon black reactors and ethylene furnaces). 2)nuclear industry (for instance UO 2 and PuO 2 as fuels; SiC for encapsulation; boron carbides for control systems..)

Research on the path of synergetic development between logistics industry and the leading industry in Fujian province

Directory of Open Access Journals (Sweden)

Mei Qiaoping

2017-01-01

Full Text Available Logistics industry is closely related to other industry, the synergetic development between logistics industry and leading industry is benefit for leading industry to reduce costs, improve efficiency and promote industrial upgrading. This book analyzes the association of logistics industry and leading industry on the basis of the input-output tables of Fujian and proposes advises to promote their synergetic development based on the calculation.

Nuclear industry will soon surface

International Nuclear Information System (INIS)

Anon.

1978-01-01

The Japan Atomic Industrial Forum has carried out the annual survey of nuclear industry from the very inception of the development of nuclear power in Japan. The aim is to research and analyze nuclear-related expenditures, sales and manpower, as well as the future prospect of mining and manufacturing industries, electric utilities, trading companies and other related industries. The 19th fact-finding survey investigated into the actual conditions of the nuclear industry from April, 1977, to March, 1978. The number of companies surveyed increased by 75 from the previous year to 1,244, of which 883 or 71% responded to the questions. 501 companies did the business in the field of nuclear power. The first thing to be pointed out about the economic conditions of the nuclear industry is that the nuclear related expenditures increased in electric utilities, mining and manufacturing industries and trading companies, and exceeded 1 trillion yen mark for the first time in the private sector. It is likely that the current nuclear-related activities of mining and manufacturing industries will soon increase, but it will not be easy to wipe off the cumulative deficit of the industries. The employees increased by more than 7% in the nuclear-related sectors of electric utilities and mining and manufacturing industries. The facilities of nuclear supply industry were operated at the average rate of 50%. (Kako, I.)

Industry - An Urban Developer. Case Study: Iron and Steel Industry in Romania

Directory of Open Access Journals (Sweden)

Radu SĂGEATĂ

2013-06-01

Full Text Available The profound economic and social changes that took place during the period of transition from a central-based economy to the market system have deeply marked the evolution of industrial towns, particularly those targeted for heavy industry development between 1950 and 1989. The present paper analyses this model of urban evolution affected by the interference of the political-ideological factor. Three towns, Galaţi, Târgovişte and Oţelu Roşu, in which a strong iron-and-steel industry was planted, have been taken into the study. Galaţi – a large town with complex functions, a regional and crossborder polarization center, was singled out for this type of industry by political decision within the context of the industrialization drive of the 1950s; Târgovişte – an old middle urban center, was pushed into the iron-and-steel route in the 1970-1980 decade. Oţelu Roşu – a small town, has a traditional iron-and-steel industry based on local raw material resources. Relying on historical documents, bibliographical sources and field work, the author correlates urban development evolutions with the industrialization policies, highlighting the causes that have led to the present decline of these towns and the challenges facing the local authorities in revitalizing them in a sustainable manner.

77 FR 20615 - DAU Industry Day: “Affordability, Efficiency, and the Industrial Base”

Science.gov (United States)

2012-04-05

... the Industrial Base'' AGENCY: Defense Acquisition University (DAU), DoD. ACTION: Event notice. SUMMARY... to discuss affordability, efficiency, and the industrial base. After a variety of presenters, the... this time of fiscal austerity, while maintaining a healthy industrial base. Following the plenary...

The Role of Industrial Robots in the Development of Automotive Industry in China

OpenAIRE

Karabegović , Isak

2016-01-01

International audience; The world’s largest user of industrial robots in production processes is automotive industry, because global competition in the market requires continuous automation and modernization of production processes in the automotive industry. The use of robots in the world is continuously increasing year by year, so it is expected that about 414.000 robot units will be used in 2019. China is the first country in the world in the application of industrial robots, and is increa...

Industrial Strategy and the Regions : the shortcomings of a narrow sectoral focus

OpenAIRE

Fothergill, Stephen; Gore, Tony; Wells, Peter

2017-01-01

Key points\\ud  - The new money that the UK government has allocated to support its industrial strategy is targeted at R&D in an exceptionally narrow range of sectors – healthcare & medicine, robotics & artificial intelligence, batteries, self-driving vehicles, materials for the future and satellites & space technology.\\ud  - Even on a generous definition of the industries that might benefit from the new Industrial Strategy Challenge Fund, these sectors account for little more than 1 per cen...

Industrial & Manufacturing Engineering | Classification | College of

Science.gov (United States)

Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

Key movement forces in the dairy industry in the Czech Republic

Directory of Open Access Journals (Sweden)

Renata Černíková

2004-01-01

Full Text Available The paper analyses key movement forces in the dairy industry in the Czech Republic and evaluates their importance in the industry and their influence on the following development of the dairy industry in the Czech Republic.The current most important key movement forces in the dairy industry in the Czech Republic are identified: changes in the long-term industry growth rate and marketing innovations. There is space for growth of the industry – the average consumption of the milk products in the Czech Republic per inhabitant 225,1 kg in 2002 is almost by 17% lower than in 1989 (269 kg per inhabitant and also by 10% lower than the current average consumption in the EU countries (250 kg per inhabitant. There is also space for increase exports from the Czech Republic into the EU countries. The liberalization of the foreign trade with cheeses and curds – “double-zero variation” was positive for the Czech Republic in the first year after the introduction. The share of the import of cheeses and curds on the total export from the EU decreased from 24.6% to 15.5%, and the share of the export of cheeses and curds on the total export from the CR into the EU increased from 10.1% to 19.7%.The key movement forces in the dairy industry in the Czech Republic also are changes in the cost effectiveness; the foreign capital; and key forces resulting from the factors in the macro-environment – the integration of the Czech Republic into the European Union, the government interventions and changes in the government policy.

Mapping of wine industry

OpenAIRE

Віліна Пересадько; Надія Максименко; Катерина Біла

2016-01-01

Having reviewed a variety of approaches to understanding the essence of wine industry, having studied the modern ideas about the future of wine industry, having analyzed more than 50 maps from the Internet we have set the trends and special features of wine industry mapping in the world, such as: - the vast majority of maps displays the development of the industry at regional or national level, whereas there are practically no world maps; - wine-growing regions are represented on maps very un...

The Space Industry

National Research Council Canada - National Science Library

Borrelli, Carmine; Buckon, Danielle; Cogossi, Bruce; Davidson, Cynthia; Ditzler-Smith, Cristie; Doddato, August; Gabrielson, Charles; Hubbard, Kenneth; Jacocks, Kent; Jircitano, Valerie

2007-01-01

.... To ensure these, U.S. policy should encourage more commercial activity in space, emphasize a more globally cooperative environment, change acquisition methods to emphasize cost control over performance at any cost...

Technological Interfaces of the Brazilian Shipbuilding and Offshore Industry

Directory of Open Access Journals (Sweden)

Andre Cherubini Alves

2014-06-01

Full Text Available The recent challenges of the Brazilian naval and offshore industry have generated a unique opportunity for studies on technological innovation and economic development. This paper presents the recent developments and future prospects of this industry under the theoretical framework of ‘technological interfaces’. Technological interfaces are defined as the thread of knowledge and technology necessary for establishing a transaction between two or more agents. It is both a theoretical construct and a tool for better understanding industrial coherence and dynamics. The development project of ship and platform construction in Brazil, unveils a potential dynamic similar to large national projects, such as the U.S. space project in the 50s. By establishing scientific parameters of analysis for the study, it is possible to generate a broader diagnosis of the technological interface matrix of the industry, but mainly it is possible to map the framework of operational gaps and the needs for technical-scientific development.

Greening Food Processing Industry in Vietnam: Putting Industrial Ecology to Work

OpenAIRE

Tran Thi My Dieu

2003-01-01

The significant contribution to Vietnam's gross domestic product over the years give evidence of the important role of food processing industry in the economic and industrial development of the country. This is even more relevant from now onwards, as it is Vietnam's development strategy to become one of the top agricultural countries in the world by the year 2010. However, it is not difficult to recognize that the rapid growth of food processing industry in Vietnam goes together with environm...

Inter- and intra-industry variations of capital structure in the Czech manufacturing industry

Directory of Open Access Journals (Sweden)

Pavlína Pinková

2013-01-01

Full Text Available The objective of the paper is to investigate the existence of inter-industry variations in the capital structure of enterprises of the Czech manufacturing industry and to identify the intra-industry causes of these differences. Three measures of capital structure are employed to determine the inter-industry variations. These are total debt ratio, long-term debt and short-term debt ratios. The set of explanatory variables is included to clarify the intra-industry variations. These explanatory variables are size, asset structure, asset utilization, profitability, non-debt tax shield and growth. The paper reports the analysis of capital structure of five distinctive industrial branches, namely the manufacture of beverages, the manufacture of textiles, the manufacture of paper and paper products, the manufacture of chemicals and chemical products, and the manufacture of computer, electronic and optical products. The data come from the financial statements of selected companies and cover a period from 2008 to 2012. The analysis of variance, correlation and regression analyses are used to develop the statistical framework. The paper aims to study the impact of industry and firm characteristics on capital structure choice.

Uranium industry annual 1998

International Nuclear Information System (INIS)

1999-01-01

The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ''Uranium Industry Annual Survey.'' Data provides a comprehensive statistical characterization of the industry's activities for the survey year and also include some information about industry's plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ''Uranium Industry Annual Survey'' is provided in Appendix C. The Form EIA-858 ''Uranium Industry Annual Survey'' is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs

Industrial power distribution

CERN Document Server

Fehr, Ralph

2016-01-01

In this fully updated version of Industrial Power Distribution, the author addresses key areas of electric power distribution from an end-user perspective for both electrical engineers, as well as students who are training for a career in the electrical power engineering field. Industrial Power Distribution, Second Edition, begins by describing how industrial facilities are supplied from utility sources, which is supported with background information on the components of AC power, voltage drop calculations, and the sizing of conductors and transformers. Important concepts and discussions are featured throughout the book including those for sequence networks, ladder logic, motor application, fault calculations, and transformer connections. The book concludes with an introduction to power quality, how it affects industrial power systems, and an expansion of the concept of power factor, including a distortion term made necessary by the existence of harmonic.

Strategic aspects of exploiting geothermal energy for industrial purposes

International Nuclear Information System (INIS)

Ludviksson, V.

1992-01-01

Geothermal energy is widely used in Iceland for space heating swimming pools and snow melting systems as well as for greenhouses and soil heating and aquaculture. Its contribution to the standard of living in Iceland is very substantial. The industrial applications are, however, fewer today than anticipated twenty years ago. This paper considers some of the socio-economic reasons for that. Although geothermal energy is generally a cost competitive source of energy, it is site limited and does not by itself provide sufficient economic incentive to attract manufacturing or process industries. This generally requires another, locally available production factor offering further competitive advantage to justify greenfield investments. World economic slow-downs, and structural problems in many process industries after the energy crisis of the seventies have reduced interest for investments in energy intensify industries world wide. While public sector initiative motivated by technological possibilities was instrumental for developing geothermal resources in the past, time has now come for private sector initiative, led by market interest, to identify and exploit opportunities for using geothermal energy for industrial purposes. National and local governments must, however, provide the appropriate incentives to stimulate such developments

Process and petroleum industry

International Nuclear Information System (INIS)

1998-01-01

In comparison with many industries, the oil and gas industry is somewhat unique in that it has been operating in a global environment for many decades. The North Sea exploration and production industry is now entering a challenging era for business growth which is a mature region with smaller and smaller fields, more difficult to find and which require innovative development schemes. This presentation relates to information technology offering the exploration and production industry a unique set of business tools to improve performance and enable growth while reducing risk

Process and petroleum industry

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

In comparison with many industries, the oil and gas industry is somewhat unique in that it has been operating in a global environment for many decades. The North Sea exploration and production industry is now entering a challenging era for business growth which is a mature region with smaller and smaller fields, more difficult to find and which require innovative development schemes. This presentation relates to information technology offering the exploration and production industry a unique set of business tools to improve performance and enable growth while reducing risk

Industrial Economics in Scandinavia

DEFF Research Database (Denmark)

Foss, Nicolai Juul; Møllgaard, Peter

2004-01-01

Based on diverse research methods, we trace and map industrial economics research in Denmark, Norway and Sweden in the periode of 1880 to 1908. After describing this research in terms of key contributors, we argue that industrial economics developed rather unevenly in the Scandinavian countries....... Danish research was mainly theoretical and strongly oriented towards the international context, whereas Norwegian research was largely industry analysis with a strong leaning towards managerial economics. Swedish research in industrial economics is very scant until the end of the 1960s.JEL Code: B1, B2...

Social Innovation and New Industrial Contexts: Can Designers "Industrialize" Socially Responsible Solutions?

DEFF Research Database (Denmark)

Morelli, Nicola

2007-01-01

framework for this paper. An investigation is proposed beyond the traditional links between design and industry, emphasising new insights into the changes in the social role of industrial production. Furthermore, the paper proposes a methodological exploration to help designers focus on new actors and new...... perspectives in search for possible convergences between the logic of socially responsible design and the contribution of the industrial culture....

Industrial Applications of Nuclear Energy

International Nuclear Information System (INIS)

2017-01-01

This publication provides a detailed overview of the potential use of nuclear energy for industrial systems and/or processes which have a strong demand for process heat/steam and power, and on the mapping of nuclear power reactors proposed for various industrial applications. It describes the technical concepts for combined nuclear-industrial complexes that are being pursued in various Member States, and presents the concepts that were developed in the past to be applied in connection with some major industries. It also provides an analysis of the energy demand in various industries and outlines the potential that nuclear energy may have in major industrial applications such as process steam for oil recovery and refineries, hydrogen generation, and steel and aluminium production. The audience for this publication includes academia, industry, and government agencies.

Robotics and Industrial Arts.

Science.gov (United States)

Edmison, Glenn A.; And Others

Robots are becoming increasingly common in American industry. By l990, they will revolutionize the way industry functions, replacing hundreds of workers and doing hot, dirty jobs better and more quickly than the workers could have done them. Robotics should be taught in high school industrial arts programs as a major curriculum component. The…

The Negro in the Furniture Industry. The Racial Policies of American Industry Series.

Science.gov (United States)

Fulmer, William E.

This is the twenty-eighth of a series of studies conducted to determine variances in industrial employment practices of Negroes and to develop appropriate hiring policies. This particular study sought to examine current racial employment policies in the furniture industry within the context of the industry's structure and history. Interviews with…

Industrial services at CERN

CERN Multimedia

2002-01-01

The Bulletin looks at industrial services contracts and the real impact of the cost reductions at CERN. The level of industrial services contracts varies from one phase to another. For example, during the dismantling of LEP (photo) it rose substiantially to fall again at the end of dismantling. Industrial services contracts are an important resource for CERN. The level and nature of such contracts changes according to the phase of operation of the Laboratory. A construction phase, as for the LHC, requires a higher level of industrial services contracts compared with a period of normal running. During the operation of LEP, industrial services contracts were thus maintained at a level of 120 MCHF per year. The level rose to 156 MCHF in 2001 to include contracts awarded for dismantling LEP, and fell to about 144 MCHF in 2002 when the dismantling was complete. During the whole LHC construction period, up to 2007, industrial services spending will be stable in the range 135-140 MCHF per year. For the running pe...

OCT for industrial applications

Science.gov (United States)

Song, Guiju; Harding, Kevin

2012-11-01

Optical coherence tomography (OCT), as an interferometric method, has been studied as a distance ranger. As a technology capable of producing high-resolution, depth-resolved images of biological tissue, OCT had been widely used for the application of ophthalmology and has been commercialized in the market today. Enlightened by the emerging research interest in biomedical domain, the applications of OCT in industrial inspection were rejuvenated by a few groups to explore its potential for characterizing new materials, imaging or inspecting industrial parts as a service solution[3]. Benefiting from novel photonics components and devices, the industrial application of the older concepts in OCT can be re-visited with respect to the unique performance and availability. Commercial OCT developers such as Michelson Diagnostics (MDL; Orpington, U.K.) and Thorlabs (Newton, NJ) are actively exploring the application of OCT to industrial applications and they have outlined meaningful path toward the metrology application in emerging industry[3]. In this chapter, we will introduce the fundamental concepts of OCT and discuss its current and potential industrial applications.

Abstracts of the TICCIH Canada conference on industrial strength : conserving Canada's industrial heritage

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

The conservation and rehabilitation of Canada's industrial sites represents some of the most innovative examples of heritage site development. This conference provided a forum for various stakeholder, conservation specialists, and community planners to discuss issues and strategies for preserving Canada's industrial heritage. Challenges related to preserving industrial heritage as historic sites and museums were discussed. Methods of strengthening community identity and engagement with industrial heritage preservation were also presented. The future of an industrial heritage network was considered. The conference was divided into the following 7 sessions: (1) new site development, brownfield to heritage sites, (2) inventories, evaluation and awareness, (3) industrial heritage of Hamilton, (4) conservation, adaptive reuse and economic viability, a case study of the Toronto distillery project, (5) industrial landscapes, (6) preserving the intangibles, and (7) industrial heritage museums, issues in conservation, interpretation, and sustainability. The conference featured 19 papers, of which 2 have been catalogued separately for inclusion in this database. refs., tabs., figs.

Design research and industrial applicability

DEFF Research Database (Denmark)

Andreasen, Mogens Myrup

1997-01-01

Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry.......Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry....

Industrial Pollution in Ghana: Some Selected Case Studies of Industries in Tema

International Nuclear Information System (INIS)

Taylor, Nora Priscilla Ama Kuma

1999-09-01

Waste waters from eight selected industries namely Tema Oil Refinery, Tuyee Manufacturing Industries, Cocoa Processing Company, Tema Lube Oil Company Limited, Pioneer Food Cannery Limited, Bridal Trust Paints Company Limited, Ghana Textiles Manufacturing Company and Ghana Textiles Printing Company Limited were sampled and subjected to various physico-chemical and trace metal analysis to determine levels of pollutants, using standard methods of WHO, AO AC and APHA. Generally, the ROD values were found to be high for all the industries. Some other parameter levels were significantly high enough for the individual industries to deserve attention. Generally, the results seem to suggest that these industries sited in Tema, are likely contributors to the high degree of pollution of the Chemu and Gao Lagoons which have been reported by various workers as being highly polluted. Consequent to the results obtained, an attempt was made to treat the wastewaters. Thus wastewaters of three of these major industries Ghana Textiles Manufacturing Company. Pioneer Food Cannery Company Limited and Tema Lube Oil Company Limited, representing the textile, food and petroleum-based industries in the Tema industrial area of Ghana were subjected to various physical and chemical treatments using mainly local materials, to try and reduce the levels of pollutants detected in the earlier investigations. Sedimentation, filtration using paper and sea-sand and adsorption using charcoals prepared from dried coconut husks and palm kernel husks as well as industrially prepared activated charcoal as adsorbents, were some of the physical methods used whilst chemical precipitation and oxidation-reduction were the chemical methods used to bring about the desired results. Six different naturally occurring soil samples from Ankaful, Ekon and Elmina in the Central Region, Asokwa in the Ashanti Region, Bokazo in the Western Region and Somanya in the Eastern Region were also used to obtain some levels of

Industrial radiography

International Nuclear Information System (INIS)

1994-01-01

This Health and Safety Executive Information Sheet on industrial radiography aims to inform directors and managers of industrial radiography companies on the safety precautions necessary to ensure that their personnel do not exceed dose guidelines for exposure to ionizing radiation. The Ionising Radiations Regulations 1985 (IRR85) require that exposure doses for radiographers are kept as low reasonably practicable. Equipment maintenance, and the employment of proper emergency procedures will help to ensure personnel safety. (UK)

Analysis of changes in the federal funding trends to higher education for basic research in space, solar, and nuclear sciences compared to government and industry: 1967-1985

International Nuclear Information System (INIS)

Veasey, C. Jr.

1985-01-01

The problem addressed by this study is that the amount of federal funds allocated in higher education for conducting basic research in space, solar, and nuclear sciences appear to be declining relative to government and industry. To test this hypothesis, data were obtained from the National Science Foundation on the amounts of federal funds provided for research and development from fiscal years 1955 to 1985. The NSF data were organized into tables, presented, and analyzed to help determine what changes had occurred in the amounts of federal funds allocated to higher education, government, and industry for basic research in space, solar, and nuclear sciences for fiscal years 1967 to 1985. The study provided six recommendations to augment declining federal funds for basic research. (1) Expand participation in applied research, (2) Develop and expand consortia arrangements with other academic institutions of higher education. (3) Pursue other funding sources such as alumni, private foundations, industry, and state and local government. (4) Develop and expand joint research with national and industrial laboratories. (5) Expand participation in interdisciplinary and multidisciplinary research to develop technological solutions to local, regional, and national problems. (6) Develop and expand programs of reciprocal internships, and sabbaticals with industrial and national laboratories

Industrial Engineering Education in India

Science.gov (United States)

Bajpai, Shrish; Akhtar, Shagil

2017-01-01

The industrial revolution can be termed as the catalyst of human growth. The establishment of various industries has been detrimental to the meteoric rise of any commodity, product or service across the world. Industries fuel the economy of countries and form the main constituent of their GDP. Industries not only generate the production of the…

Uranium industry annual 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-04-01

The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

Energy's role in industrial competitiveness

International Nuclear Information System (INIS)

1993-01-01

At a conference on the role of energy in industrial competitiveness, papers were presented on the energy consumer's perspective on energy issues in the mineral and food industries, global perspectives on the role of energy in industrial competitiveness, a supplier's perspective on energy issues in the oil/gas and electric industries, perspectives on environmental issues including climate change, and international partnerships for industrial competitiveness, notably in the former Soviet Union and eastern Europe. Separate abstracts have been prepared for 15 papers from this conference

Australian uranium industry

Energy Technology Data Exchange (ETDEWEB)

Warner, R K

1976-04-01

Various aspects of the Australian uranium industry are discussed including the prospecting, exploration and mining of uranium ores, world supply and demand, the price of uranium and the nuclear fuel cycle. The market for uranium and the future development of the industry are described.

Energy shocks and detecting influential industries

International Nuclear Information System (INIS)

Kang, Dongsuk; Lee, Duk Hee

2017-01-01

An industry's relationship of supply and demand with the energy sector can be a critical factor in the stability of its economic performance. Furthermore, the patterns of industry dependence on energy industries can be a major characteristic of entire industrial structure. This research evaluates industries' impact scores for their overall influence on other industries and vulnerability to supply and demand shocks from the energy sector. The study utilizes a sample of Korea's industrial input–output tables from 2010 to 2012. Using a chain of complementary methodologies, this study finds that among four clusters, energy, services, and raw materials are key members that can spread energy shocks to other industries. Therefore, governments need to prepare effective energy efficiency policies for these target industries. - Highlights: • We analyze an industry's impact score of its vulnerability to energy shock and inter-industrial effects. • We utilize the sample of input-output tables in Korea from 2010 to 2012. • We implement simulation, PCA, TOPSIS, cluster analysis about energy shock and industrial trades. • Subsectors of energy, services, raw material are subject to energy shock and influential to others. • These bridge industries can be targets that require policies for effective energy efficiency.

Petroleum industry 1996

International Nuclear Information System (INIS)

1997-01-01

A survey on petroleum industry activities in France and in the world in 1996 is presented. The different parts and themes of the study are: evolution of the petroleum market (international and French markets, supply and demand, prices, mark-up and taxation in France and in Europe); activities in the petroleum industries (exploration and production, maritime transportation, inland transportation and storage, refining, quality of petroleum products and substitution fuels, oil distribution); environment and safety (refining, distribution and evolution of products, pipeline and maritime transportation, exploration and production); situation of the sector's companies (oil groups, para-petroleum French industry, scientific and technical research)

Educating Maritime Engineers for a Globalised Industry - Bridging the Gap Between Industry and Universities

DEFF Research Database (Denmark)

Andersen, Ingrid Marie Vincent; Nielsen, Ulrik Dam

2012-01-01

In Denmark, the maritime engineering competences requested by the industry have changed in the past one to two decades. The typical naval architects do no longer find themselves working in the ship-building industry but rather in the industry of ship operators, consultancies, class societies, etc....... This means that universities educating maritime engineers need to reflect the changes in the curricula for their maritime engineering students. Topics and issues regarding this matter have recently been addressed in a survey made in the Danish maritime industry. The survey concludes that the demand...... for maritime engineers in the industry is considerably larger than the output from the technical universities. Moreover, it sets forth a series of recommendations to the industry as well as to the universities to facilitate meeting the demand for maritime engineers in Denmark in the future. The recommendations...

Conveyor belt of flesh: urban space and proliferation of the industrial labor practices

OpenAIRE

BALABAN, Utku Barış

2011-01-01

The second half of the twentieth century witnessed the worldwide (re)emergence of the
non-factory forms of industrial labor. Academic studies predominantly emphasize the
economic and political globalization to explain this phenomenon. This thesis investigates
the local urban dynamics of this „proliferation of the industrial labor practices‟ with a
field research in Istanbul, Turkey. 
The field research focused on the organiza...

Performance evaluation of the conventional Brazilian industries radiation protection in the small industrial gauges and industrial radiography areas; Sistema de avaliacao de desempenho em radioprotecao das industrias convencionais brasileiras nas areas de medidores nucleares e radiografia industrial

Energy Technology Data Exchange (ETDEWEB)

Santos, Joyra Amaral dos

1999-08-01

This works evaluates by punctuation the performance in conventional Brazilian industries radiation protection area which make use of small industrial gauges and industrial radiography. It proposes, procedures for industry self-evaluation, besides a new radiation protection plans pattern for the small industrial gauges area. The data source where inspection reports of Dosimetry Radiation Protection Institute/Nuclear Energy Commission conventional Brazilian industries' radiation protection plans, beyond visitation to the inspection place. The performance evaluation has been realized both in the administrative and operational aspects of the industries. About of 60% of the industries have a satisfactory register control which does not happen to the operational control. The performance evaluation advantage is that industries may self-evaluate, foreseeing Dosimetry Radiation Protection Institute's regulation inspections, correcting its irregularities, automatically improving its services. The number of industries which have obtained satisfactory performance in both areas is below 70%, both in administrative and operational aspects. Such number can be considered a low one as it is radiation protection. The procedures propose in this work aim to improve such a situation. (author)

Industry recession to persist

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that the depressed U.S. oil and gas industry is not likely to recover soon, witnesses told the Texas Railroad Commission's state of the petroleum industry hearing. Major companies and independent operators agreed the U.S. petroleum industry is near a state of collapse. Many the producers are despairing about the chances of surviving the latest economic downturn

Nuclear industry technology boomerang

International Nuclear Information System (INIS)

Scholler, R.W.

1987-01-01

The benefits to the medical, pharmaceutical, semiconductor, computer, video, bioscience, laser, defense, and numerous high-tech industries from nuclear technology development fallout are indeed numerous and increase every day. Now those industries have made further progress and improvements that, in return, benefit the nuclear industry. The clean-air and particle-free devices and enclosures needed for protection and decontamination are excellent examples

Globalisation, Crisis and Industrial Relations in the Indian Auto Industry

DEFF Research Database (Denmark)

D'Costa, Anthony

2011-01-01

in the broader capital-labour relation in the wider global economy due to globalisation is argued to be tempered by India's particular national and local institutions governing industrial relations, unionisation, the specific trajectory of the Indian auto industry, and economic development strategies. When much...... for employment security and lessons for other countries in these turbulent times....

Setting SMART targets for industrial energy use and industrial energy efficiency

NARCIS (Netherlands)

Rietbergen, M.G.|info:eu-repo/dai/nl/14111634X; Blok, K.|info:eu-repo/dai/nl/07170275X

2010-01-01

Industrial energy policies often require the setting of quantitative targets to reduce energy use and/or greenhouse gas emissions. In this paper a taxonomy has been developed for categorizing SMART industrial energy use or greenhouse gas emission reduction targets. The taxonomy includes volume

Industrial Performance of the Renewable Resources Industry in China

OpenAIRE

Dong Zhou; Xingang Zhao

2015-01-01

Promoting the development of renewable resources industry is an effective way to solve the problems of resources shortage and environmental pollution in China. In this paper, studies have found that “market structure” and “ownership structure”, namely “double structure”, is an important explanatory variable that affects industrial performance according to the “structure-conduct-performance” paradigm. Literature reviews have shown that large state-owned enterprises are playing an important rol...

Technical change in US industry: A cross-industry analysis

Science.gov (United States)

Nelson, R. R. (Editor)

1981-01-01

The nature of the public policies which have influenced the pace and pattern of technical progress in a number of American industries is studied with the view of assessing the broad effects of these policies. The industries studied are agriculture, pharmaceuticals, semiconductors, computers, civil aircraft, automobiles and residential construction. The policies considered include research and development funding as well as government procurement, education, information dissemination, patent protection, licensing, regulations, and anti-trust policies.

The Industrial Internet of Things

OpenAIRE

Albano, Michele; Silva, José Bruno; Lino Ferreira, Luis

2017-01-01

Demo in 22º Seminário da Rede Temática de Comunicações Móveis (RTCM 2017). 18, Jan, 2017, Session III. Lisboa. The application of the Internet of Things to manufacturing is the driving force of the new industrial revolution (Industrie 4.0). In fact, most activities in the manufacturing industry can benefit from the data collected in the context of the industrial process. The Industrial Internet of Things (IIoT), whose pillars are the usage of IP communication between the devices and making...

The Fourth Industrial Revolution (Industry 4.0: A Social Innovation Perspective

Directory of Open Access Journals (Sweden)

Rabeh Morrar

2017-11-01

Full Text Available The rapid pace of technological developments played a key role in the previous industrial revolutions. However, the fourth industrial revolution (Industry 4.0 and its embedded technology diffusion progress is expected to grow exponentially in terms of technical change and socioeconomic impact. Therefore, coping with such transformation require a holistic approach that encompasses innovative and sustainable system solutions and not just technological ones. In this article, we propose a framework that can facilitate the interaction between technological and social innovation to continuously come up with proactive, and hence timely, sustainable strategies. These strategies can leverage economic rewards, enrich society at large, and protect the environment. The new forthcoming opportunities that will be generated through the next industrial wave are gigantic at all levels. However, the readiness for such revolutionary conversion require coupling the forces of technological innovation and social innovation under the sustainability umbrella.

Nuclear industry chart

International Nuclear Information System (INIS)

Anon.

1975-01-01

As part of a survey on Switzerland a pull-out organisation chart is presented of the nuclear industry showing Swiss government bodies and industrial concerns. Their interests, connections with each other and their associations with international and other national organizations and firms are indicated. (U.K.)

Wanted! Industrial Hygienists.

Science.gov (United States)

Stilkind, Jerry

1979-01-01

Due to increased pressure (for example, from the Occupational Safety and Health Act) to create healthier/safer worker environments, the number of industrial hygienist positions has increased. Compares the need to the demand. Examines industrial hygienist salary ranges, expected educational background, job opportunities, and training program…

Systems engineering, systems thinking, and learning a case study in space industry

CERN Document Server

Moser, Hubert Anton

2014-01-01

This book focuses on systems engineering, systems thinking, and how that thinking can be learned in practice. It describes a novel analytical framework based on activity theory for understanding how systems thinking evolves and how it can be improved to support multidisciplinary teamwork in the context of system development and systems engineering. This method, developed using data collected over four years from three different small space systems engineering organizations, can be applied in a wide variety of work activities in the context of engineering design and beyond in order to monitor and analyze multidisciplinary interactions in working teams over time. In addition, the book presents a practical strategy called WAVES (Work Activity for a Evolution of Systems engineering and thinking), which fosters the practical learning of systems thinking with the aim of improving process development in different industries. The book offers an excellent resource for researchers and practitioners interested in system...

ATLAS rewards industry

CERN Multimedia

2006-01-01

Showing excellence in mechanics, electronics and cryogenics, three industries are honoured for their contributions to the ATLAS experiment. Representatives of the three award-wining companies after the ceremony. For contributing vital pieces to the ATLAS puzzle, three industries were recognized on Friday 5 May during a supplier awards ceremony. After a welcome and overview of the ATLAS experiment by spokesperson Peter Jenni, CERN Secretary-General Maximilian Metzger stressed the importance of industry to CERN's scientific goals. Close interaction with CERN was a key factor in the selection of each rewarded company, in addition to the high-quality products they delivered to the experiment. Alu Menziken Industrie AG, of Switzerland, was honoured for the production of 380,000 aluminium tubes for the Monitored Drift Tube Chambers (MDT). As Giora Mikenberg, the Muon System Project Leader stressed, the aluminium tubes were delivered on time with an extraordinary quality and precision. Between October 2000 and Jan...

Chromatography in Industry

Science.gov (United States)

Schoenmakers, Peter

2009-07-01

This review focuses on the chromatography research that has been carried out within industry or in close cooperation with industry and that has been reported in the scientific literature between 2006 and mid-2008. Companies in the health care sector, such as pharmaceutical and biotechnology companies, are the largest contributors. Industrial research seems to take place in an open environment in cooperation with academia, peer companies, and institutions. Industry appears ready to embrace new technologies as they emerge, but they focus strongly on making chromatography work robustly, reliably, rapidly, and automatically. “Hyphenated” systems that incorporate on-line sample-preparation techniques and mass-spectrometric detection are the rule rather than the exception. Various multidimensional separation methods are finding numerous applications. Strategies aimed at speeding up the development of new chromatographic methods remain the focus of attention. Also, there is a clear trend toward exploring chromatographic methods for parallel processing along with other strategies for high-throughput analysis.

The Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR): Industrial Radiography

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-08-15

Industrial radiography work is often carried out under difficult working conditions, such as in confined spaces, in extreme cold or heat, or during the night. Working under such adverse conditions might result in operational situations in which occupational radiation protection may be compromised. Experience shows that incidents involving industrial radiography sources have sometimes resulted in high doses to workers, causing severe health consequences such as radiation burns and, in a few cases, death. It has been long known that there is significant potential for industrial radiography personnel to receive non-trivial occupational exposure. However, a global perspective is lacking, as is the availability of a systematic means for improving occupational radiation protection in industrial radiography worldwide. In 2006, the IAEA published IAEA Safety Standards Series No. SF-1, Fundamental Safety Principles, jointly sponsored by the European Atomic Energy Community, the Food and Agriculture Organization of the United Nations (FAO), the International Labour Organization (ILO), the International Maritime Organization, the OECD Nuclear Energy Agency (OECD/NEA), the Pan American Health Organization (PAHO), the United Nations Environment Programme (UNEP) and the World Health Organization (WHO). That publication sets out the fundamental safety objective and principles of protection and safety. In 2014, the IAEA published IAEA Safety Standards Series No. GSR Part 3, Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards (the BSS), jointly sponsored by the European Commission, the FAO, the ILO, OECD/NEA, the PAHO, UNEP and the WHO. The BSS sets out the requirements that are designed to meet fundamental safety objectives and to apply the principles specified in IAEA Safety Standards Series No. SF-1. The establishment of safety requirements and provision of guidance on occupational radiation protection is a major component of the support

The Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR): Industrial Radiography

International Nuclear Information System (INIS)

2014-08-01

Industrial radiography work is often carried out under difficult working conditions, such as in confined spaces, in extreme cold or heat, or during the night. Working under such adverse conditions might result in operational situations in which occupational radiation protection may be compromised. Experience shows that incidents involving industrial radiography sources have sometimes resulted in high doses to workers, causing severe health consequences such as radiation burns and, in a few cases, death. It has been long known that there is significant potential for industrial radiography personnel to receive non-trivial occupational exposure. However, a global perspective is lacking, as is the availability of a systematic means for improving occupational radiation protection in industrial radiography worldwide. In 2006, the IAEA published IAEA Safety Standards Series No. SF-1, Fundamental Safety Principles, jointly sponsored by the European Atomic Energy Community, the Food and Agriculture Organization of the United Nations (FAO), the International Labour Organization (ILO), the International Maritime Organization, the OECD Nuclear Energy Agency (OECD/NEA), the Pan American Health Organization (PAHO), the United Nations Environment Programme (UNEP) and the World Health Organization (WHO). That publication sets out the fundamental safety objective and principles of protection and safety. In 2014, the IAEA published IAEA Safety Standards Series No. GSR Part 3, Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards (the BSS), jointly sponsored by the European Commission, the FAO, the ILO, OECD/NEA, the PAHO, UNEP and the WHO. The BSS sets out the requirements that are designed to meet fundamental safety objectives and to apply the principles specified in IAEA Safety Standards Series No. SF-1. The establishment of safety requirements and provision of guidance on occupational radiation protection is a major component of the support

Entwicklungslinien der estnischen Industrie

Directory of Open Access Journals (Sweden)

Matti Raudjärv

2013-01-01

Full Text Available The problems related to industry are topical because there is no real industrial policy in Estonia today. The aim of this article is to provide an overview of the stages of development of Estonian industry in different periods (…–1858, ……, 2010–…. Estonian industry has been predominantly concentrated to Tallinn and its immediate vicinity and to other cities and towns of North Estonia, to a lesser extent also to other larger Estonian cities and county centres and their immediate vicinity. Disposition of industry in Estonia has been predominantly related to appropriate geographical conditions and existence of local natural resources and raw materials, traditions and experience but has also depended on decisions on economic policy in different periods, both on the national and local government levels. After regaining of independence there have been no particular fundamental positive changes in regional industrial development in Estonia, we can rather even talk about regression instead for some places. These are, however, necessary in order to ensure jobs to people in all inhabited regions, above all in rural areas. It would also contribute to a balanced regional development in Estonia.

Power and control in interactions between journalists and health-related industries: the view from industry.

Science.gov (United States)

Morrell, Bronwen; Lipworth, Wendy L; Forsyth, Rowena; Jordens, Christopher F C; Kerridge, Ian

2014-06-01

The mass media is a major source of health information for the public, and as such the quality and independence of health news reporting is an important concern. Concerns have been expressed that journalists reporting on health are increasingly dependent on their sources--including representatives of industries responsible for manufacturing health-related products--for story ideas and content. Many critics perceive an imbalance of power between journalists and industry sources, with industry being in a position of relative power, however the empirical evidence to support this view is limited. The analysis presented here--which is part of a larger study of industry-journalist relationships--draws on in-depth, semi-structured interviews with representatives of health-related industries in Australia to inductively examine their perceptions of power relations between industry and journalists. Participants painted a picture in which journalists, rather than themselves, were in a position to control the nature, extent, and outcome of their interactions with industry sources. Our results resonate with the concept of "mediatisation" as it has been applied in the domain of political reporting. It appears that, from the perspective of industry representatives, the imposition of media logic on health-related industries may inappropriately influence the information that the public receives about health-related products.

Uranium industry annual, 1986

International Nuclear Information System (INIS)

1987-01-01

Uranium industry data collected in the EIA-858 survey provide a comprehensive statistical characterization of annual activities of the industry and include some information about industry plans over the next several years. This report consists of two major sections. The first addresses uranium raw materials activities and covers the following topics: exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment. The second major section is concerned with the following uranium marketing activities: uranium purchase commitments, uranium prices, procurement arrangements, uranium imports and exports, enrichment services, inventories, secondary market activities utility market requirements and related topics

Forest industries energy research

Energy Technology Data Exchange (ETDEWEB)

Scott, G. C.

1977-10-15

Data on energy use in the manufacturing process of the wood products industry in 1974 are tabulated. The forest industries contributed 10% of New Zealand's factory production and consumed 25% of all industrial energy (including that produced from self-generated sources such as waste heat liquors and wood wastes) in that year. An evaluation of the potential for savings in process heat systems in existing production levels is shown to be 3% in the short, medium, and long-term time periods. The industry has a high potential for fuel substitution in all sectors. The payback periods for the implementation of the conservation measures are indicated.

Automotive Industry in Malaysia

DEFF Research Database (Denmark)

Wad, Peter; Govindaraju, V.G.R. Chandran

2011-01-01

) limited participation in the global value chain. Although the Malaysian infant industry protection policy comprised many promising initiatives, the national and the overall domestic automobile industry ended up as a captive of the regionalised Japanese keiretsu system in automobile manufacturing. A new...... expanded in terms of sales, production, employment and local content, but failed in industrial upgrading and international competitiveness. The failures can be attributed to (a) lack of political promotion for high challenge-high support environment, (b) low technological and marketing capabilities and (c...... transformation is required to push the industry beyond its current performance through a more strategic productive coalition with multiple stakeholders including trade unions....

EU Industrial Policy

DEFF Research Database (Denmark)

Pellegrin, Julie; Giorgetti, Maria Letizia; Jensen, Camilla

Following disregard in the 1980s, industrial policy has recently attracted policy attention at EU level. The objective of this study provided by Policy Department A at the request of the ITRE Committee, is to establish the state of the art of a coordinated and integrated EU industrial policy...

Sustainable Industrial Production

DEFF Research Database (Denmark)

Christensen, Irene

2015-01-01

The purpose of this case is to create awareness about a somewhat unfamiliar industry that accounts for over €3 billion in Scandinavia and £5,6 billion in the UK, the Metals recycling industry. The case features a Scandinavian Company and includes several perspectives from managerial disciplines...

VE of construction industry

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-10-15

This book gives descriptions of basic of VE of construction industry including doing away with mannerism, necessity of cost reduction, management method of cost reduction, thinking of idea, target of VE, starting VE activity, technical method of VE of construction industry such as thinking of idea with brainstorming, function trade method, new brainstorming, MM method, morphology analysis and lateral thinking, cases of VE of construction industry.

VE of construction industry

International Nuclear Information System (INIS)

1987-10-01

This book gives descriptions of basic of VE of construction industry including doing away with mannerism, necessity of cost reduction, management method of cost reduction, thinking of idea, target of VE, starting VE activity, technical method of VE of construction industry such as thinking of idea with brainstorming, function trade method, new brainstorming, MM method, morphology analysis and lateral thinking, cases of VE of construction industry.

Federal agencies active in chemical industry-related research and development

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-29

The Energy Policy Act of 1992 calls for a program to further the commercialization of renewable energy and energy efficient technologies for the industrial sector.. The primary objective of the Office of Industrial Technologies Chemical Industry Team is to work in partnership with the US chemical industry to maximize economic, energy, and environmental benefits through research and development of innovative technologies. This document was developed to inventory organizations within the federal government on current chemical industry-related research and development. While an amount of funding or number of projects specifically relating to chemical industry research and development was not defined in all organizations, identified were about 60 distinct organizations representing 7 cabinet-level departments and 4 independent agencies, with research efforts exceeding $3.5 billion in fiscal year 1995. Effort were found to range from less than $500 thousand per year at the Departments of Agriculture and the Interior to over $100 million per year at the Departments of Commerce, Defense, Energy, and Health and Human Services and the National Aeronautics and Space Administration. The total number of projects in these programs exceeded 10,000. This document is complete to the extent that agencies volunteered information. Additions, corrections, and changes are encouraged and will be incorporated in future revisions.

Redevelopment to Preserve Industrial Heritage. Appendix III

International Nuclear Information System (INIS)

2011-01-01

responsibility. Moreover, there is a general negative public perception, and sympathy for demolition. While science and industrial museums continue to attract support, the wider industrial heritage is unlikely to match the current public perception of valued heritage without a sustained campaign of access and education. This will also need to challenge the prevalent view that the industrial period is one that is best forgotten or removed from view (other than in the safety of a museum). For example, the very concept of a museum should be changed. Industrial heritage sites transformed into museums are not only places of education and information, but also have an important symbolic value. Due to reconstructions of the past, museums are not places where memories are relived, but spaces for creating them. In newer industrial sites with reconstructed surroundings and machinery, grandparents can tell stories of 'the way we were' to their grandchildren and thus provide them with a direct link to a world that they never experienced. In addition, as heritage issues are forced 'downstream' in the change management process, the perception of heritage as a negative issue becomes reinforced, leading to less, rather than more, involvement. A better approach is to harness and integrate the historic environment at an early stage. In this way, the results can be both financially successful and deliver attractive redevelopment. In other words, the industrial landscape should be conceived as a living and functioning space, where protection is a form of managing the changes affecting the site, not a general list of restrictions and limitations. In conclusion, today it is necessary to engage knowledgeably and confidently with the change process in order to open eyes to opportunities. Reuse of buildings and whole landscapes into new and productive uses while securing their integrity and their meaning in the landscape is one desired approach

Using Industrial Robots to Manipulate the Measured Object in CMM

Directory of Open Access Journals (Sweden)

Samir Lemes

2013-07-01

Full Text Available Coordinate measuring machines (CMMs are widely used to check dimensions of manufactured parts, especially in the automotive industry. The major obstacles in automation of these measurements are fixturing and clamping assemblies, which are required in order to position the measured object within the CMM. This paper describes how an industrial robot can be used to manipulate the measured object within the CMM work space, in order to enable automation of complex geometry measurement.

Industrial ecology Prosperity Game{trademark}

Energy Technology Data Exchange (ETDEWEB)

Beck, D.; Boyack, K.; Berman, M.

1998-03-01

Industrial ecology (IE) is an emerging scientific field that views industrial activities and the environment as an interactive whole. The IE approach simultaneously optimizes activities with respect to cost, performance, and environmental impact. Industrial Ecology provides a dynamic systems-based framework that enables management of human activity on a sustainable basis by: minimizing energy and materials usage; insuring acceptable quality of life for people; minimizing the ecological impact of human activity to levels that natural systems can sustain; and maintaining the economic viability of systems for industry, trade and commerce. Industrial ecology applies systems science to industrial systems, defining the system boundary to incorporate the natural world. Its overall goal is to optimize industrial activities within the constraints imposed by ecological viability, globally and locally. In this context, Industrial systems applies not just to private sector manufacturing and services but also to government operations, including provision of infrastructure. Sandia conducted its seventeenth Prosperity Game{trademark} on May 23--25, 1997, at the Hyatt Dulles Hotel in Herndon, Virginia. The primary sponsors of the event were Sandia National Laboratories and Los Alamos National Laboratory, who were interested in using the format of a Prosperity Game to address some of the issues surrounding Industrial Ecology. Honorary game sponsors were: The National Science Foundation; the Committee on Environmental Improvement, American Chemical Society; the Industrial and Engineering Chemistry Division, American Chemical Society; the US EPA--The Smart Growth Network, Office of Policy Development; and the US DOE-Center of Excellence for Sustainable Development.

Free surface flows in industry

OpenAIRE

Murphy, Ellen

2014-01-01

peer-reviewed Applied mathematicians have long sourced problems from industrial processes. The relationship between mathematics and industry is mutually beneficial. Mathematical models provide industry with invaluable insights into the fundamental physical processes at play in a system and give mathematicians the opportunity to apply known techniques to new problems. In this thesis, two independent problems originating in industrial processes are studied, with a common featu...

Trace of Korean mechanical industry

International Nuclear Information System (INIS)

1996-12-01

This book reports 50 years of Korean mechanical engineers, which includes birth and history, remembrance and future of Korean society of mechanical engineers, current situation and development of mechanical industry such as national industry and 50 years of mechanical industry, track, airline industry, ship and marine engine, a precision instrument, cutting work, casting, welding, plastic working freeze and air handling nuclear power and textile machinery.

Quantitative and qualitative investigation of industrial solid waste in industrial plants located between Tehran and Karaj

Directory of Open Access Journals (Sweden)

M.R. Gohari

2011-07-01

Full Text Available Background and aims   Rapid population growth, industrial development, urbanization culture propagation and excessive material consumption are the most important factor which caused over increasing of municipal, industrial and agricultural waste in human society. Inappropriate disposal of generated waste in recent years created several environmental menace and crisis in human society.   methods   For investigation about existent situation of industrial waste generation questionnaire had been used. This questionnaire was catered by Iran environmental protection organization. Aforementioned questionnaire contained 45 questions about combination, quality and quantity of industrial waste. Total number of more than 50 personnel industry was 287 . But sample contained 50 randomly selected industries. Gathered data have been analyzed with spss 18.   Results  Total generated industrial waste was 123451KG per day which had volume equal to 781 cubic meters per day. Generated waste capitation per every worker was 5.8 KG. Maximum frequency of industrial was related to machinery and equipment group which maximum generated waste was related to this industrial group too. Maximum hazardous waste was for inflammable waste with 34 weight percent. Major hazardous waste generating industrial was chemical and plastic making industry.   Conclusion  yielded result from this investigation has shown that significant relation existed between waste production rate and personnel number. The more personnel are, the more waste production increase.

Greening Food Processing Industry in Vietnam: Putting Industrial Ecology to Work

NARCIS (Netherlands)

Tran Thi My Dieu,

2003-01-01

The significant contribution to Vietnam's gross domestic product over the years give evidence of the important role of food processing industry in the economic and industrial development of the country. This is even more relevant from now onwards, as it is Vietnam's development strategy to become

Geothermal industry assessment

Energy Technology Data Exchange (ETDEWEB)

1980-07-01

An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

Sustainable Industrial Production

DEFF Research Database (Denmark)

Brattebö, Helge; Jørgensen, Michael Søgaard; Lorentzen, Børge

The book discusses the concepts of waste minimization, cleaner technology and industrial ecology, including the experiences with employee participation in preventive environmental activities in companies.......The book discusses the concepts of waste minimization, cleaner technology and industrial ecology, including the experiences with employee participation in preventive environmental activities in companies....

Ethos and industry: a critical study of oil industry advertising from 1974-1984

Energy Technology Data Exchange (ETDEWEB)

Kurzbard, G.

1984-01-01

This study examines the advocacy advertising of the oil industry in general, and Mobil and Exxon Corporations in particular, during the years 1974-1984. The prospects of divestiture and nationalization of the industry, as a result of both gasoline shortages and exponential increases in profits which begin in the early seventies', created a profound concern by the majors that increasing public disaffection might result in legislation inimical to the industry. Mobil and Exxon's advertising attempted to provide a justification not only for their own operations, but for the entire American socio-economic system. The industry's value system was clearly reflected in its efforts to convince the public that its motives grew from an abiding commitment to the nation's well-being. The ideational underpinnings of oil industry discourse are traced through a rhetorical exploration of specific advertising campaigns. The study maintains that the weltanschauung of Big Oil is both directly and indirectly manifest in its advertising. An overall assessment of oil industry advertising is provided within a Burkean framework to treat of the textural elements of its discourse.

What nuclear industry can learn from the digital transformation of high-tech industries

International Nuclear Information System (INIS)

Confais, E.

2017-01-01

The aircraft industry, the oil industry and the shipbuilding industry share with nuclear industry common issues like the importance of security and safety, long investment cycles and a fierce worldwide competition. All these industries can inspire one another to face these challenges with their own use of digital technologies. A common use of digital technologies is to favor innovation and accelerate its implementation in the industrial cycle through the shortening of both the certification step and the upgrading-time of the production line. Innovation requires creativity and creativity needs freedom, digital technologies can favor initiatives by shadowing the traditional hierarchy at opening the company to a new world of ideas. It also appears that digital technologies allows the quick processing of massive volumes of data that could be used for preventive maintenance and the optimization of the equipment. The broad digitalization of the economy has a dark side: the rising of cyber risks and enterprises have to face them which generally implies to rethink security inside the enterprise. Some companies have overhauled their IT department and have segregated and monitored the access to data. (A.C.)

The Danish Industrial Enzyme Industry - National based Companies with strong internationalised R&D

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Hansen, Anne Grethe

Danish industrial enzyme industry consists of three main companies (Chr. Hansen A/S, Novozymes A/S and Danisco A/S) which in total has around 75 percent of the world market for industrial enzymes. Industrial enzymes are catalysts used in biological and chemical processes in food, detergents, paper...... and energy and many other fields. Historically the industry started up in 1874 based on empiric knowledge on use of rennet in production of cheese from Switzerland and Germany and later enriched by scientific knowledge produced in the company and institutions all over the world. Important for the company...... was resources of calve stomachs from which the active stuff can be extracted. The private university, The Carlsberg Laboratory, established nearly at the same time, became after First World War a world leader in research of enzymes. And inspiration from here to the pharmaceutical company in insulin production...

An Evaluation of Industrial Facilities Defects in Selected Industrial Estates in Lagos State, Nigeria

Directory of Open Access Journals (Sweden)

Oseghale, G.E.

2014-01-01

Full Text Available The study appraised the state of industrial facilities in selected industrial estates established between 1957 and 1981 in Lagos State by examining the nature and causes of facilities’ defects in the selected industrial estates. The buildings sampled were load bearing sandcrete block wall (1%, concrete framed structure (83% and steel framed structure (16%. Data were sourced using structured questionnaire administered on the staff of maintenance department of 35 building materials and plastic manufacturing industries purposively selected and located in 18 industrial estates. Data obtained were analyzed using descriptive statistic. The study found the structural elements of the buildings, i.e. foundations, beams, walls, and floors satisfactory. Using the mean response analysis, the result showed that the most severe factors responsible for industrial facilities’ defects were combined effects of geo-climatic factors (2.35, combined effects of biological agencies (2.15, corrosion (1.98, and physical aggression on the facilities (1.71.

RUSSIAN INDUSTRY INVESTMENT SITUATION

Directory of Open Access Journals (Sweden)

O. V. Pochukaeva

2011-01-01

Full Text Available The actual deficiency of investment into Russian industry innovative development increases its technological drag from industries of countries with developed markets. Although the rate of investment into real sectors of Russian economics mid 2000 was higher compared to the previous period, annual investment amounts were much lower than in 1990. At present, highest investment amounts are directed to industry extractive branches and to the commerce. Amounts invested to various economy branches do not correspond to their contribution to the country’sGross Added Product; particularly underinvested are manufacturing industry branches. At present, foreign share in the country economy total investment makes 15–18%. Recently, most interesting for foreigners was investment to machine-building branches with overwhelming part (for example, 90% in 2007–2008 of foreign investment into the machine-building industry being directed to creation of new automobile plants. Today, first place in the list of foreign investors’ preferences in Russia is taken by the machine-tool construction sector.

European PV industry -- The future beckons

International Nuclear Information System (INIS)

Shah, D.J.

1994-01-01

The author believes that there are reasons to believe that the solar industry is poised on the brink of rapid commercial growth, leading to broadly-based industry viability. The author discusses the role that the European solar industry has to play in helping to bring about a better future. He begins his discussion with the current state of the European industry and follows with recommendations of what the European industry should be doing to encourage the solar industry growth

Towards eco-agro industrial clusters in aquatic production: the case of shrimp processing industry in Vietnam

NARCIS (Netherlands)

Pham Thi Ahn,; Tran Thi My Dieu,; Mol, A.P.J.; Kroeze, C.; Bush, S.R.

2011-01-01

The concept of industrial ecology has been applied in this research to study possibilities to develop an eco-industrial cluster model for fishery production industry in Vietnam. By learning from experiments of other developed countries, we apply the principles of Industrial Ecology and of Ecological

The Politics of Industrial Policy

DEFF Research Database (Denmark)

Whitfield, Lindsay; Buur, Lars

2014-01-01

Economic transformation is driven by successfully implemented industrial policy, but industrial policy is inherently political. We cannot understand why some governments pursue and implement industrial policy better than others without understanding the politics. This article addresses...

The origins of American industrial success: Evidence from the US portland cement industry

OpenAIRE

Prentice, David

2008-01-01

The contributions of innovations, factor endowments and institutions to American industrialization are examined through analysing the rise of the American portland cement industry. Minerals abundance contributed in multiple ways to the spectacular rise of the industry from the 1890s. However, the results of a structural econometric analysis of entry suggests geological surveys, institutions highlighted by David and Wright, played a contributing rather than critical rol...

Insurance industry guide

International Nuclear Information System (INIS)

Anon.

1992-01-01

This is an insurance industry guide for the independent power industry. The directory includes the insurance company's name, address, telephone and FAX numbers and a description of the company's area of expertise, products and services, and limitations. The directory is international in scope. Some of the companies specialize in independent power projects

Reuse of industrial sludge as construction aggregates.

Science.gov (United States)

Tay, J H; Show, K Y; Hong, S Y

2001-01-01

Industrial wastewater sludge and dredged marine clay are high volume wastes that needed enormous space at landfill disposal sites. Due to the limitation of land space, there is an urgent need for alternative disposal methods for these two wastes. This study investigates the possibility of using the industrial sludge in combination with marine clay as construction aggregates. Different proportions of sludge and clay were made into round and angular aggregates. It was found that certain mix proportions could provide aggregates of adequate strength, comparable to that of conventional aggregates. Concrete samples cast from the sludge-clay aggregates yield compressive strengths in the range of 31.0 to 39.0 N/mm2. The results showed that the round aggregates of 100% sludge and the crush aggregates of sludge with up to 20% clay produced concrete of compressive strengths which are superior to that of 38.0 N/mm2 for conventional aggregate. The study indicates that the conversion of high volume wastes into construction materials is a potential option for waste management.

Industrial Waste Landfill IV upgrade package

International Nuclear Information System (INIS)

1994-01-01

The Y-12 Plant, K-25 Site, and ORNL are managed by DOE's Operating Contractor (OC), Martin Marietta Energy Systems, Inc. (Energy Systems) for DOE. Operation associated with the facilities by the Operating Contractor and subcontractors, DOE contractors and the DOE Federal Building result in the generation of industrial solid wastes as well as construction/demolition wastes. Due to the waste streams mentioned, the Y-12 Industrial Waste Landfill IV (IWLF-IV) was developed for the disposal of solid industrial waste in accordance to Rule 1200-1-7, Regulations Governing Solid Waste Processing and Disposal in Tennessee. This revised operating document is a part of a request for modification to the existing Y-12 IWLF-IV to comply with revised regulation (Rule Chapters 1200-1-7-.01 through 1200-1-7-.08) in order to provide future disposal space for the ORR, Subcontractors, and the DOE Federal Building. This revised operating manual also reflects approved modifications that have been made over the years since the original landfill permit approval. The drawings referred to in this manual are included in Drawings section of the package. IWLF-IV is a Tennessee Department of Environmental and Conservation/Division of Solid Waste Management (TDEC/DSWM) Class 11 disposal unit

Energy conservation: motors in industry; Maitrise de l`energie: les moteurs dans l`industrie

Energy Technology Data Exchange (ETDEWEB)

Lavoine, O.; David, A. [Electricite de France (EDF), 75 - Paris (France). Direction des Etudes et Recherches

1996-12-31

The Electricite de France demand side management policy towards industry is particularly aimed at reducing industry`s power consumption from electric motors through the use of electronic speed variators which may induce mean energy savings of 25 percent. Pumps, fans and compressors, amounting to two-third of the total electric motor energy consumption, are the main application fields for electronic variators. EDF proposes technical and energy diagnosis and audits in industrial plants in order to evaluate the possibility and potential of electronic variator introduction

Uranium Industry Annual, 1992

International Nuclear Information System (INIS)

1993-01-01

The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ''Decommissioning of US Conventional Uranium Production Centers,'' is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2

Uranium Industry Annual, 1992

Energy Technology Data Exchange (ETDEWEB)

1993-10-28

The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

Challenges and Strength of Current Industrial Energy Efficiency Management Practices in Steam Industries

Science.gov (United States)

Nkosi, S. B.; Pretorius, J. H. C.

2017-07-01

The aim of this study is to achieve greater output by examining the existing way of coordinating the determined attempts of Steam Industries in South Africa to successfully reach a sustainable industrial development by using energy source adequately in a more competent way. Furthermore into the study we look at obstacles that prevent and those that leads to maximum utilization of energy management measures and also highlights the effects of implementing cheap available energy source in South Africa. The investigation and analysis have shown that energy is not well managed in Steam Industries and that the use of energy is minimized and not fully utilized due to poor management and lack of knowledge. Another detection was that lack of government structured and strategic measures of implementing and motivating the use of energy effectively. The effective and rational use of available power by Steam Industries in South Africa is a key player in developing a sustainable industrial development. The use of energy efficiency management strategies has contributed an increase in economic and improve environmentally friendly in the industrial sector. The slow pace adoption of energy saving and cost effective management programmes are negatively impacting on the benefits to Steam Industries in South Africa. In conclusion the study finds that the economy can be boosted by implementing energy efficiency management programmes and environmentally friendly. These will also stabilize the negative impact of energy raising prices.

Building an Economical and Sustainable Lunar Infrastructure to Enable Lunar Industrialization

Science.gov (United States)

Zuniga, Allison F.; Turner, Mark; Rasky, Daniel; Loucks, Mike; Carrico, John; Policastri, Daniel

2017-01-01

A new concept study was initiated to examine the architecture needed to gradually develop an economical, evolvable and sustainable lunar infrastructure using a public/private partnerships approach. This approach would establish partnership agreements between NASA and industry teams to develop a lunar infrastructure system that would be mutually beneficial. This approach would also require NASA and its industry partners to share costs in the development phase and then transfer operation of these infrastructure services back to its industry owners in the execution phase. These infrastructure services may include but are not limited to the following: lunar cargo transportation, power stations, communication towers and satellites, autonomous rover operations, landing pads and resource extraction operations. The public/private partnerships approach used in this study leveraged best practices from NASA's Commercial Orbital Transportation Services (COTS) program which introduced an innovative and economical approach for partnering with industry to develop commercial cargo services to the International Space Station. This program was planned together with the ISS Commercial Resupply Services (CRS) contracts which was responsible for initiating commercial cargo delivery services to the ISS for the first time. The public/private partnerships approach undertaken in the COTS program proved to be very successful in dramatically reducing development costs for these ISS cargo delivery services as well as substantially reducing operational costs. To continue on this successful path towards installing economical infrastructure services for LEO and beyond, this new study, named Lunar COTS (Commercial Operations and Transport Services), was conducted to examine extending the NASA COTS model to cis-lunar space and the lunar surface. The goals of the Lunar COTS concept are to: 1) develop and demonstrate affordable and commercial cis-lunar and surface capabilities, such as lunar cargo

Co-evolution of Industry Strategies and Government Policies: The Case of the Brazilian Automotive Industry

Directory of Open Access Journals (Sweden)

Roberto Gonzalez Duarte

2017-07-01

Full Text Available This study examines the evolution of the automotive industry in Brazil and its key drivers. We argue that the rules of the game – industry policies – are an outcome of exchanges between the host government and industry. These arise from changes in economic and political environments and interdependence between industry and the country’s economy. To this end, we draw upon literature on institutions and co-evolution to understand the industry footprint over a 50-year period, as well as its relationship with changes in government policies. This study generates new insights on institutional and co-evolution political perspectives by showing that the rules of the game are not only the making of the government, but are also the result of interdependencies between industry and government.

Industrial waste heat for district heating

International Nuclear Information System (INIS)

Heitner, K.L.; Brooks, P.P.

1982-01-01

Presents 2 bounding evaluations of industrial waste heat availability. Surveys waste heat from 29 major industry groups at the 2-digit level in Standard Industrial Codes (SIC). Explains that waste heat availability in each industry was related to regional product sales, in order to estimate regional waste heat availability. Evaluates 4 selected industries at the 4-digit SIC level. Finds that industrial waste heat represents a significant energy resource in several urban areas, including Chicago and Los Angeles, where it could supply all of these areas residential heating and cooling load. Points out that there is a strong need to evaluate the available waste heat for more industries at the 4-digit level. Urges further studies to identify other useful industrial waste heat sources as well as potential waste heat users

2016 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site's Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond

International Nuclear Information System (INIS)

Cafferty, Kara Grace

2017-01-01

This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (WRU-I-0160-01, Modification 1, formerly LA 000160 01), for the wastewater reuse site at the Idaho National Laboratory Site's Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond from November 1, 2015, through October 31, 2016.

The future of the chemical industries

International Nuclear Information System (INIS)

Shinnar, R.

1991-01-01

As Lincoln, we first must ask where we are before we ask whither. I'd therefore like to define where our industry is and how it got there before we look at the challenges facing us. If we view the chemical and petroleum industries through the glass of macroeconomics, they look very healthy. Let's start with size. Table 1 shows that these two industries each provide about 10% of the total U.S. manufacturing output. This paper shows the fraction of the total GNP contributed by the chemical industry and by the petroleum industry and compares them with total manufacturing. The authors note that total manufacturing grew more slowly than the total GNP, whereas over the last 40 years, the chemical industry grew close to the rate of the GNP. For a large industry, this is the best we can hope for. The chemical industry is one of the very few major industries that has consistently maintained a positive trade balance

The nuclear industry in France

International Nuclear Information System (INIS)

Degot, D.

1981-02-01

The French nuclear industry is organized around the following main participants: - The E.D.F., owners, industrial architects and operators of the power stations, - The C.E.A. for research and development, with its subsidiary the COGEMA, who deal with all problems involving the fuel cycle, - The Industry with FRAMATOME in charge of the manufacture of nuclear boilers, and ALSTHOM-ATLANTIQUE in charge of turbo-generator units. This paper deals with the activities covered by FRAMATOME and its industrial environment. The standardization of PWR power stations built by French industry and the possibilities of exporting PWR power stations are given a brief mention [fr

The Role and relevance of mathematics in the maritime industry ...

African Journals Online (AJOL)

Maritime activities occupy more than three-quarters of the world space and provide a huge occupational industry for mankind. Of late, ship construction and usage including space management onboard the vessels and the ports have brought about a great dependency on mathematical principles or models such as time ...

Industry Valuation Driven Earnings Management

NARCIS (Netherlands)

T. Jiao (Tao); G.M.H. Mertens (Gerard); P.G.J. Roosenboom (Peter)

2007-01-01

textabstractThis paper investigates whether industry valuation impacts firms’ earnings management decisions. Existing accounting literature assumes that industry valuation has a constant impact on this decision. We argue that a higher industry valuation increases the perceived benefits of earnings

Analisis Industri Ritel Di Indonesia

OpenAIRE

Soliha, Euis

2008-01-01

This article presents an overview the analisys of retail industry in Indonesia.Retail industry in Indonesia grow rapidly. Industrial presence of modern retailbasically exploits public shopping pattern especially middle-weight and to which donot want to mill around in traditional market. Analysis Five Forces is used toanalysis retail industry. Analysis five force is bargaining power of buyers,bargaining power of suppliers, threat of new entrants, threat of new substituteproducts, and rivalry a...

Explicating industrial brand equity: Integrating brand trust, brand performance and industrial brand image

OpenAIRE

Syed Alwi, SF; Nguyen, B; Melewar; Yeat-Hui, L; Liu, M

2016-01-01

Purpose (mandatory) The research explores brand equity from multiple perspectives (tangible and intangible) and their joint consequences, namely, on industrial buyers’ brand loyalty and their long-term commitment. The aim is to provide a more comprehensive framework of the buyer’s behavioral response in the business to business context by integrating both trust elements and industrial brand attributes (brand performance and industrial brand image). In addition, the study explores the mediatio...

Ontology-driven approach for describing industrial socio-cyberphysical systems’ components

OpenAIRE

Teslya Nikolay; Ryabchikov Igor

2018-01-01

Nowadays, the concept of the industrial Internet of things is considered by researchers as the basis of Industry 4.0. Its use is aimed at creating a single information space that allows to unite all the components of production, starting from the processed raw materials to the interaction with suppliers and users of completed goods. Such a union will allow to change the established business processes of production to increase the customization of end products for the consumer and to reduce th...

Management, restructuring and industrial relations : organizational change within the United Kingdom broadcasting industry, 1979-2002

OpenAIRE

Quinn, Brian J.

2007-01-01

In the past decade researchers began to remedy a literature deficit in the study of broadcasting institutions – addressing in particular the issues of labour process, restructuring and industrial relations. This thesis which considers management change, industrial relations and restructuring within the United Kingdom (‘UK’) broadcasting industry employs a case study format with a view to highlighting the variations of industry (macro) and firm (micro) based restructuring. Organizational chang...

Industrial coal utilization

Energy Technology Data Exchange (ETDEWEB)

None

1979-01-01

The effects of the National Energy Act on the use of coal in US industrial and utility power plants are considered. Innovative methods of using coal in an environmentally acceptable way are discussed: furnace types, fluidized-bed combustion, coal-oil-mixtures, coal firing in kilns and combustion of synthetic gas and liquid fuels. Fuel use in various industries is discussed with trends brought about by uncertain availability and price of natural gas and fuel oils: steel, chemical, cement, pulp and paper, glass and bricks. The symposium on Industrial Coal Utilization was sponsored by the US DOE, Pittsburgh Energy Technology Center, April 3 to 4, 1979. Twenty-one papers have been entered individually into the EDB. (LTN)

Global Credit Risk: World, Country and Industry Factors

NARCIS (Netherlands)

Schwaab, B.; Koopman, S.J.; Lucas, A.

2017-01-01

We investigate the dynamic properties of systematic default risk conditions for firms in different countries, industries and rating groups. We use a high-dimensional nonlinear non-Gaussian state-space model to estimate common components in corporate defaults in a 41 country samples between 1980:Q1

Ontology-driven approach for describing industrial socio-cyberphysical systems’ components

Directory of Open Access Journals (Sweden)

Teslya Nikolay

2018-01-01

Full Text Available Nowadays, the concept of the industrial Internet of things is considered by researchers as the basis of Industry 4.0. Its use is aimed at creating a single information space that allows to unite all the components of production, starting from the processed raw materials to the interaction with suppliers and users of completed goods. Such a union will allow to change the established business processes of production to increase the customization of end products for the consumer and to reduce the costs for its producers. Each of the components is described using a digital twin, showing their main characteristics, important for production. The heterogeneity of these characteristics for each of the production levels makes it very difficult to exchange information between them. To solve the problem of interaction between individual components this paper proposes to use the ontological approach to model the components of industrial socio-cyberphysical systems. The paper considers four scenarios of interaction in the industrial Internet of things, based on which the upper-level ontology is formed, which describes the main components of industrial socio-cyberphysical systems and the connections between them.

Improving the Management of Innovative Development of Industrial Production According to Industry Specifics

Directory of Open Access Journals (Sweden)

Papizh Yuliia S.

2018-03-01

Full Text Available The problem of improvement of management efficiency of innovative development of industrial enterprises in modern economic conditions is indicated. The dynamics of innovative processes in Ukraine together with volumes of innovative activity of domestic enterprises are analyzed. The basic principles of formation and efficient functioning of the organizational-economic mechanism of innovative development of industrial production are substantiated. The branch specificity in management of innovative development of coal enterprises is identified. Directions of improvement of the organizational-economic mechanism of management of innovative development of enterprises of coal industry are defined. The basic principles of introduction of the mechanism for stimulation of innovative development of enterprises of coal industry are suggested.

4.0 industry: a new industrial challenge and a new economic model

International Nuclear Information System (INIS)

Blanchet, M.; Confais, E.

2016-01-01

The 4.0 industry is in fact a new industrial revolution. The implementation on a great scale of new technologies like additive manufacturing, big data, virtual or enhanced reality, the internet of objects, compels all the enterprises to re-invent themselves by integrating smart machines, cooperative robots, maintenance prediction, or mass production of personalized items. Of course nuclear industry will benefit from it in all aspects of its activity by ensuring a better quality, a better traceability, a better document management, an optimized maintenance, or a better work-site organisation. (A.C.)

Industry and Happiness

DEFF Research Database (Denmark)

Olsén, Peter; Nielsen, Birger Steen; Nielsen, Kurt Aagaard

1996-01-01

A wage earner utopia on a democratic innovation of society. A hermeneutic reconstruction from an action research project with a group of workers from the danish fishing industry.......A wage earner utopia on a democratic innovation of society. A hermeneutic reconstruction from an action research project with a group of workers from the danish fishing industry....

New Books for Industrial Educators

Science.gov (United States)

School Shop, 1975

1975-01-01

The most recent book releases in the field of industrial-technical education are listed alphabetically under: automotive/power mechanics; building trades; drafting; electricity/electronics; graphic arts, industrial arts, vocational, technical and career education; industrial mathematics; machine shop/metalworking; metrics; radio/television;…

\tFactors Influencing Growth of Cottage Industry in Punjab, Pakistan: Cottage Industry Owners’ Perspective

Directory of Open Access Journals (Sweden)

Syed Hussain Haider

2015-12-01

Full Text Available In this paper the author has tried to highlight the factors, which determine growth of cottage industry in province of the Punjab. A questionnaire has been developed to check the significance of different variables that have already been examined in different prior studies on the matter in different countries. The respondents were owners of cottage industries selected randomly, from rural and urban areas of the Punjab. The findings of the study will help the government of Pakistan to take necessary actions to protect cottage industry of Pakistan. The study will also help the owners of cottage industry to identify the factors, they must focus to promote their business. Thus, the research findings have its implications in twofold; primarily for the policy makers to help the cottage industry for its survival and growth and secondly for the owners of cottage industry to stress only on the most relevant factors. On the basis of data collected it has been observed that five variables have significant impact over the growth of cottage industry of Pakistan.

Future demands for an Industrialized Architecture?

DEFF Research Database (Denmark)

Beim, Anne

2011-01-01

When speaking about the future demands for industrialized architecture – or how to translate industrialized processes into tectonic sustainable design strategies in architecture – several questions come to mind. First of all, why is the building industry in comparison to the production industry...... these questions raise a wide-spread discussion, one could argue that the building industry can benefit from different ways of architectural synthesis thinking as a basis for improving. This understood in such a way that industrialized manufacturing technologies and products should be driven by ideas...

Private Equity and Industry Performance

DEFF Research Database (Denmark)

Bernstein, Shai; Lerner, Josh; Sørensen, Morten

2017-01-01

The growth of the private equity industry has spurred concerns about its impact on the economy. This analysis looks across nations and industries to assess the impact of private equity on industry performance. We find that industries where private equity funds invest grow more quickly in terms...... of total production and employment and appear less exposed to aggregate shocks. Our robustness tests provide some evidence that is consistent with our effects being driven by our preferred channel....

Industrial Engineering Education in India

OpenAIRE

Bajpai Shrish; Akhtar Shagil

2017-01-01

The industrial revolution can be termed as the catalyst of human growth. The establishment of various industries has been detrimental to the meteoric rise of any commodity, product or service across the world. Industries fuel the economy of countries and form the main constituent of their GDP. Industries not only generate the production of the market ready material but also generate the employment for the citizens of the country, which drives multiple factors of any country progress. In order...

The Danish fabricated metal industry:

DEFF Research Database (Denmark)

Hansen, Teis

2010-01-01

This paper aims to contribute to the knowledge on innovation processes in low- and medium-low-tech industries. Today, industries characterised as high-tech are perceived to be central to economic development, as the research intensity shields them from competition from low-wage countries....... This is less the case for low-tech industries, but their economic importance continues to be large, however. It is thus interesting to analyse how they manage to remain competitive. The analysis focuses on a case study of the fabricated metal industry by identifying the innovation strategies followed by firms...... located in a part of Jutland, where this industry has experienced growth. It is found that the ability to create tailor-made solutions is central to the competitiveness of these medium-low-tech firms. Knowledge is thus highly important, yet in different ways than for high-tech industries. This illustrates...

Online University-Industry Collaboration

DEFF Research Database (Denmark)

Søndergaard, Helle Alsted; Bergenholtz, Carsten; Juhl, Hans Jørn

Extant studies have shown how online communities can promote collaborative and innovative activities in general. Studies on university-industry collaborations have so far focused less on online activities. We therefore set out to examine the individual and organizational drivers and barriers...... for academics and industrial professionals to contribute to online community-based platforms. We use a mixed method approach using both survey data and in-depth interviews with respondents from the Danish food sector. Findings show that in line with known studies on online innovation communities in general......, the main drivers for engagement are organizational and individual learning, and establishing connections, rather than monetary incentives. In contrast to offline studies on university-industry interactions, well-connected academics are less interested in online communities of academics and industry...

Entrepreneurship in Creative Industries

Directory of Open Access Journals (Sweden)

Jūratė Černevičiūtė

2011-10-01

Full Text Available Creative industries topic is closely related to the art markets in a variety of mediation forms. Traditional business entrepreneurship is risk-related activities implementing innovations in markets, and generating economic growth. The creative industry area has plenty of innovation, but its acceptance is more complex because of the cultural world’s participants’ agreements. Cultural world has its own social organization, associated with the mediation (including entrepreneurship types. The article examines the concept of entrepreneurship in the traditional business and creative industries and types of innovation and mediation (including entrepreneurship. The conclusion is that types of intermediary in creative industries depend on the cultural world’s social organization, and forms of mediation are more heterogeneous than in the traditional business. 

Industry 4.0 learning factory didactic design parameters for industrial engineering education in South Africa

OpenAIRE

Sackey, S. M.; Bester, A.; Adams, D.

2017-01-01

To manage the impact of Industry 4.0 on industrial engineering (IE) education curriculum requirements, realistic teaching and learning infrastructure such as a learning factory are required. This paper scans the literature to determine Industry 4.0’s principles and interactions with IE and a learning factory, surveys relevant universities by questionnaire to determine its current status and practices, and formulates didactic design parameters for an Industry 4.0 learning factory to support IE...

Modern electrochemistry and industry

International Nuclear Information System (INIS)

Kim, Sun Yong

1985-04-01

This book is divided into fifteen chapters on modern electrochemistry and industry. The contents of this book are electrochemistry and industry, electrochemistry for electrolyte like ionic mobility quantity of activity of electrolyte, potential balance system like cell potential, concentration cell and membrane potential, electrochemical kinetics, electrochemistry for surfactant, electrochemistry for electrolysis test such as polarography, chronopotentiometry and Cyclic voltametry, electrolysis reactor NaOH electrolysis industry, H 2 O electrolysis, molten metal electrolysis, copper electrolysis, battery and electro-organic chemistry.

Progress in Industrial Mathematics at ECMI 96

DEFF Research Database (Denmark)

mathematicians get inspiration from industrial demands. The European Consortium for Mathematics in Industry aims to create contact between industry and academia, and to promote research in industrial mathematics. This book contains a broad spectrum of mathematics applied to industrial problems. Applied...... mathematics, case studies, and review papers in the following fields are included: Environmental modelling, railway systems, industrial processes, electronics, ships, oil industry, optimization, machine dynamics, fluids in industry. Applied mathematicians and other professionals working in academia...

Technological competence and competitiveness of Korea industry

International Nuclear Information System (INIS)

Lee, Geun

1997-06-01

This book introduces technology and competitiveness and industrial policy of economics, technological competence and technological innovation system of Korea, a newly industrialized country, development of technological innovation and competence of semiconductor industry, development of technological innovation and competence of synthetic fiber industry, development of technological innovation and competence of machine tool industry, development of technological competence of automobile industry, improvement and delay of technological competence of computer industry, and development of technological innovation and competitiveness of appliance industry.

Industrialization

African Journals Online (AJOL)

Lucy

. African states as ... regarded as the most important ingredients that went to add value to land and labour in order for countries ... B. Sutcliffe Industry and Underdevelopment (Massachusetts Addison – Wesley Publishing Company. 1971), pp.

Contributions and future of radioisotopes in medical industrial, and space applications

International Nuclear Information System (INIS)

Tingey, G.L.; Wahlquist, E.J.

1991-01-01

Of the over 2300 isotopes identified to data, more than 1700 are short-lived with half-lives less than one day, 283 are stable, and 333 have a half-life between 1 day and 100,000 years. It is on this last group that the authors focus for the isotopes with useable radioactivity. Radioisotopes are used in a wide variety of applications including public health, medicine, industrial technology, food technology and packaging, agriculture, energy supply, and national security. The purpose of this paper is to provide an overview of some of the most extensive applications of radioisotopes including some observations of future uses. As for the future, we expect radioisotopes to contribute to a myriad of diverse applications to improve technological, scientific, and industrial endeavors, which include improving the length and quality of life through improved diagnosis and treatment of the human ills

2016 Bioenergy Industry Status Report

Energy Technology Data Exchange (ETDEWEB)

Moriarty, Kristen L. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Milbrandt, Anelia R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Warner, Ethan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Lewis, John E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Schwab, Amy A. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2018-03-03

This report provides a snapshot of the bioenergy industry status at the end of 2016. The report compliments other annual market reports from the U.S. Department of Energy’s (DOE’s) Office of Energy Efficiency and Renewable Energy offices and is supported by DOE’s Bioenergy Technologies Office (BETO). The 2016 Bioenergy Industry Status Report focuses on past year data covering multiple dimensions of the bioenergy industry and does not attempt to make future market projections. The report provides a balanced and unbiased assessment of the industry and associated markets. It is openly available to the public and is intended to compliment International Energy Agency and industry reports with a focus on DOE stakeholder needs.

DESIGN AND MANUFACTURING OF MODULAR PARQUET FLOORING IN INDUSTRIAL SYSTEM

Directory of Open Access Journals (Sweden)

Ivan CISMARU

2014-09-01

Full Text Available The paper submits constructive options and methods to design and manufacture modular parquet flooring, as well as fastening methods in constructions. Likewise, it presents the branches of civil engineering where modular parquet flooring may be turned to profit – industrial buildings, company premises or residential premises. The turn towards the achievement of private constructions, such as individual houses, led to losing control of the modular system applied in defining the inner sizes of the constructions and implicitly to the apparition of dimensional incompatibilities between the parquet flooring and the built spaces. The paper sets out (to solve by an individualized design procedure to achieve modular parquet flooring in industrial system, in correspondence with the sizes of the inner spaces afferent to the constructions.

Innovation, Industry Evoluation and Employment

NARCIS (Netherlands)

D.B. Audretsch (David); A.R. Thurik (Roy)

1999-01-01

textabstractThe purpose of this paper is to introduce a series of articles on the links between innovation, the evolution of industry and employment. These relations provide the building blocks of a new industrial policy. The articles are included in Innovation, Industry Evolution and Employment

Gamma Ray Tomographic Scan Method for Large Scale Industrial Plants

International Nuclear Information System (INIS)

Moon, Jin Ho; Jung, Sung Hee; Kim, Jong Bum; Park, Jang Geun

2011-01-01

The gamma ray tomography systems have been used to investigate a chemical process for last decade. There have been many cases of gamma ray tomography for laboratory scale work but not many cases for industrial scale work. Non-tomographic equipment with gamma-ray sources is often used in process diagnosis. Gamma radiography, gamma column scanning and the radioisotope tracer technique are examples of gamma ray application in industries. In spite of many outdoor non-gamma ray tomographic equipment, the most of gamma ray tomographic systems still remained as indoor equipment. But, as the gamma tomography has developed, the demand on gamma tomography for real scale plants also increased. To develop the industrial scale system, we introduced the gamma-ray tomographic system with fixed detectors and rotating source. The general system configuration is similar to 4 th generation geometry. But the main effort has been made to actualize the instant installation of the system for real scale industrial plant. This work would be a first attempt to apply the 4th generation industrial gamma tomographic scanning by experimental method. The individual 0.5-inch NaI detector was used for gamma ray detection by configuring circular shape around industrial plant. This tomographic scan method can reduce mechanical complexity and require a much smaller space than a conventional CT. Those properties make it easy to get measurement data for a real scale plant

Effects of energy policy on industry

Energy Technology Data Exchange (ETDEWEB)

Carling, A; Dargay, J; Oettinger, C; Sohlman, A

1978-06-01

This report contains results from a number of studies of energy consumption in Swedish manufacturing industries and of the sensitivity of different industrial sectors to energy taxation and other kinds of energy policy measures. These studies have been concentrated to three energy-intensive sectors, namely the pulp and paper industry; mining and metal production (especially iron mines and the steel industry); and the brick, cement, and lime industry.

Industrial applications of computer tomography

International Nuclear Information System (INIS)

Sheng Kanglong; Qiang Yujun; Yang Fujia

1992-01-01

Industrial computer tomography (CT) and its application is a rapidly developing field of high technology. CT systems have been playing important roles in nondestructive testing (NDT) of products and equipment for a number of industries. Recently, the technique has advanced into the area of industrial process control, bringing even greater benefit to mankind. The basic principles and typical structure of an industrial CT system Descriptions are given of some successful CT systems for either NDT application or process control purposes

Cultural Identity of the Industrial Heritage in Gdansk

Science.gov (United States)

Szymański, Tomasz

2017-10-01

Since its inception, urbanized area passes a number of changes, caused by demands of its inhabitants. Industrial heritage, including historic architecture at the brownfields, that’s more and more present in the centres of our cities, is one of the most important components of the identity. The development of civilization causes the phenomenon of spatial and functional transformations. Revitalization of the areas recently occupied by the industry, provides a unique opportunity to rediscover their values. Increasingly, however, it uses the terms “wasteland” or “brownfields”. Land use by industry is associated only with its “predatory” use, destruction, devastation. However, we can venture to say, that the existing industrial use of the land, “civilized” them. Current developments have restored a public access to the “new” urban space. At these areas preserved quite a lot valuable architectural objects. That can be seen, unfortunately, tend to forget the fact of complexity, multithreaded value areas and facilities. Analyzed causes of the risks, ways to prevent adverse transformations, methods of developing action plans to re-create the industrial architecture - are still discussed. Industrial heritage, particularly architecture, is one of the important components of the material culture that specify identity of the city of Gdansk. It provides with no doubt about its distinctiveness and originality in relation to other cities and regions. Revitalization projects are at the same time the most effective way to protect and preserve the cultural identity of the brownfield facilities. Examples of such transformations are most relevant to Gdansk and also beginning to be more and more visible. Areas of the main activities of revitalization in Gdansk, are the area of the former Imperial Shipyard and the Ołowianka Island are still and only the beginning of the necessary changes. Old industrial plants and technical facilities should be subject of the

AMTEX: A university, government, industry, partnership

Energy Technology Data Exchange (ETDEWEB)

Anderson, L.J. [Auburn Univ., AL (United States); Cheatham, R.L. [Pacific Northwest Lab., Richland, WA (United States); Peskin, A.M. [Brookhaven National Lab., Upton, NY (United States)

1993-12-01

The AMTEX Partnership is a research and development collaboration between the US Department of Energy (DOE), the DOE`s multiprogram laboratories, universities, and the integrated textile industry. The integrated industry includes fibers, textiles, apparel, and other fabricated products. The goal of AMTEX is to strengthen the competitiveness of this vital industry and thereby preserve and create new jobs. AMTEX is a role model for government, industry and universities working together to achieve a specified goal. Under the oversight of the Laboratory Technology Transfer Program in DOE`s Office of Energy Research, the multiprogram laboratories, universities and industry are pursuing a broad, industry-driven research agenda. It combines the research and development capabilities of industry and universities with the unique expertise and facilities of the DOE laboratory system.

Possibilities in concrete industry towards circular economy through industrial symbiosis

Directory of Open Access Journals (Sweden)

Bjegović Dubravka

2014-01-01

Full Text Available Major challenges of traditional linear concrete industry are utilisation of large amount of non-renewable resources and significant air emissions during production, utilisation and demolition of concrete structures. At the same time, concrete industry has a high potential for a positive shift towards more sustainable production and lower ecological footprint. One of the strategies is to use waste materials and byproducts from other industries as valuable raw materials in concrete industry. This loop can be closed only by taking into account properties of a certain waste material and using them for preparation of special purpose concrete products, in which these properties are favourable. Other strategy is designing concrete tailored for certain environment and service life, making it optimised for that specific purpose. The paper presents some of the available waste and recycled materials in Croatia and research focused on their potential application in civil engineering. The possibilities of utilisation are first explored in laboratory conditions, with the results presented in this paper as an outcome. Based on the obtained results some of the potential areas of application are proposed, in which concrete prepared with these waste materials becomes alternative to classical concrete. Both original scientific research results are presented, but also prototype of products produced based on the scientific research.

Development of industrial utilization of metallic sodium

International Nuclear Information System (INIS)

Yuhara, Shunichi

1995-01-01

Sodium exists in large quantity, being ranked to 6th in the existence proportion of elements, and takes 2.83% of the matters composing earth crust. Sodium is an alkali metal which is light weight, chemically very active and a strong reducing substance. It is excellent in the compatibility with iron and steel materials, and it possesses good heat conduction and flow characteristics and stable nuclear characteristics. Since the industrial production of sodium became practical, its utilization was developed as the reducing agent and catalyst in chemical industry, the core coolant and heat transport medium for nuclear reactors, the material composing the secondary batteries for storing electric power, and the auxiliaries for metal refining and so on. The industrial production of metallic sodium is carried out by the electrolysis of melted salt, namely Downs process. The production of metallic sodium in Japan is 3000-6000 t yearly, and its import is 300-350 t. Its main use is for organic chemical industry including dye production. The grades of metallic sodium products and their uses are shown. The utilization of sodium for large fast reactors, the utilization of NaK as the heat transport and cooling medium for space use nuclear reactors and deep sea fast reactor system, and the utilization of sodium as the catalyst in dye production, for silicon carbide fiber production and for agricultural and medical chemical production are reported. (K.I.)

Electronics Industry Study Report

National Research Council Canada - National Science Library

Belt, David; Fellows, John R; Kameru, Philip; Nazaroff, Boris-Frank A; Pauroso, Anthony; Schulz, Frederick; Ballew, Bob; Bond, Thomas; Demers, Stephy; Kirkpatrick, Steve

2005-01-01

This paper provides a national strategy for the US electronics industry. Electronics is one of the largest industries in the US and plays a critical role in almost every aspect of national security...

The present situation and prospect of industrial irradiation accelerator industry in China

International Nuclear Information System (INIS)

Zhao Wenyan; Wang Chuanzhen; Hou Fuzhen

2005-01-01

Accelerator technology and the machines are an important part of the nuclear technology and also are the system integration of modern science technology. The application of accelerator technology has made the important breakthrough in many science research fields, in the development course of particle physics, several milestone developments are closely related to accelerator developments. In 1960s, accelerators gradually transferred from the science research to the national economy and society application fields. In 1970s, accelerators applied in many fields involved the industry, medical hygiene, agriculture, environmental protection, and proceed the development of new technique, new craft, new product, and developed lots of newly arisen edge industries, such as the medical equipments, no damage examination, ion injecting, radiation processing. Now accelerators have become a firmly established industry. This paper primarily reviewed the application of industrial radiation accelerators by the 20 years developments of accelerators in China. (author)

The petroleum industry in 2001; L'industrie petroliere en 2001

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

This economic analysis presents the 2001 highlights and key-data of the world petroleum industry: evolution of crude prices, exploration and production worldwide, petroleum exploration and production in France, para-petroleum industry, hydrocarbon supplies, refining activity, evolution of quality of products and fuel substitutes, domestic transports, storage, consumption, fiscality, prices and distribution of petroleum products. (J.S.)

Energy Management Programmes for Industry

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-09-05

The IEA Policy Pathway publications provide details on how to implement specific recommendations drawn from the IEA 25 Energy Efficiency Policy Recommendations. This Policy Pathway, jointly produced by the International Energy Agency and the Institute for Industrial Productivity, develops the critical steps for policy makers implementing energy management programmes for industry. Optimising energy use in industry is essential to improve industrial competitiveness and achieve wider societal goals such as energy security, economic recovery and development, climate change mitigation and environmental protection. While there is significant potential to decrease energy consumption in this sector, opportunities to improve energy efficiency are still under-exploited. Energy management programmes have shown to be instrumental in addressing many of the barriers that inhibit wide-scale uptake of energy management in industry. The Policy Pathway builds on lessons learned from country experiences and provides actionable guidance on how to plan and design, implement, evaluate and monitor energy management programmes for industry.

ATLAS rewards industry

CERN Document Server

Maximilien Brice

2006-01-01

For contributing vital pieces to the ATLAS puzzle, three industries were recognized on Friday 5 May during a supplier awards ceremony. After a welcome and overview of the ATLAS experiment by spokesperson Peter Jenni, CERN Secretary-General Maximilian Metzger stressed the importance of industry to CERN's scientific goals. Picture 30 : representatives of the three award-wining companies after the ceremony

Welsh Women's Industrial Fiction 1880-1910.

Science.gov (United States)

Bohata, Kirsti; Jones, Alexandra

2017-10-02

From the beginning of the genre, women writers have made a major contribution to the development of industrial writing. Although prevented from gaining first-hand experience of the coalface, Welsh women writers were amongst the first to try to fictionalize those heavy industries-coal and metal in the south, and slate in the north-which dominated the lives of the majority of the late nineteenth-century Welsh population. Treatment of industrial matter is generally fragmentary in this early women's writing; industrial imagery and metaphor may be used in novels that are not primarily "about" industry at all. Yet from c. 1880-1910, Welsh women writers made a significant-and hitherto critically neglected-attempt to make sense in literature of contemporary industrial Wales in powerful and innovative ways. This essay maps their contribution and considers anglophone Welsh women writers' adaptations and innovations of form (particularly romance) as they try to find a way of representing industrial landscapes, communities and the daily realities of industrial labour. It identifies the genesis in women's writing of tropes that would become central to later industrial fiction, including depictions of industrial accident, injury, death and disability. And it explores the representation of social relations (class, gender, ethnicity, sexuality) and conflict on this tumultuous, dangerous new stage.

THE FOURTH INDUSTRIAL REVOLUTION „INDUSTRY 4.0”

Directory of Open Access Journals (Sweden)

Alin STĂNCIOIU

2017-05-01

Full Text Available The many observers estimate that in the world is at the beginning of a new industrial revolution, which it is considered the fourth revolution and it is called "Industry 4.0". The connecting many products to the internet, presence of sensors, wireless communications expansion, robot and intelligent machine development, real-time data analysis have the potential to turn the way the production is done. Connecting the physical world to the virtual world in cyber-physical systems it will have a disruptive impact on technologies, manufacturing processes and people.

Nuclear power industry

International Nuclear Information System (INIS)

1999-01-01

This press dossier presented in Shanghai (China) in April 1999, describes first the activities of the Framatome group in the people's republic of China with a short presentation of the Daya Bay power plant and of the future Ling Ao project, and with a description of the technological cooperation with China in the nuclear domain (technology transfers, nuclear fuels) and in other industrial domains (mechanics, oil and gas, connectors, food and agriculture, paper industry etc..). The general activities of the Framatome group in the domain of energy (nuclear realizations in France, EPR project, export activities, nuclear services, nuclear fuels, nuclear equipments, industrial equipments) and of connectors engineering are presented in a second and third part with the 1998 performances. (J.S.)

Industrialization

African Journals Online (AJOL)

Lucy

scholar, Walt W. Rostow presented and supported this line of thought in his analysis of ... A Brief Historical Background of Industrialization in Africa ... indicative) The western model allowed for the political economy to be shaped by market.

Application of narrow-band television to industrial and commercial communications

Science.gov (United States)

Embrey, B. C., Jr.; Southworth, G. R.

1974-01-01

The development of narrow-band systems for use in space systems is presented. Applications of the technology to future spacecraft requirements are discussed along with narrow-band television's influence in stimulating development within the industry. The transferral of the technology into industrial and commercial communications is described. Major areas included are: (1) medicine; (2) education; (3) remote sensing for traffic control; and (5) weather observation. Applications in data processing, image enhancement, and information retrieval are provided by the combination of the TV camera and the computer.

Industry Study, Electronics Industry, Spring 2009

Science.gov (United States)

2009-01-01

not have the flexibility in their processes to quickly produce custom system-on-chips because they are optimized for high-end production. Dell ...building its semiconductor industry, Malaysia has moved in the same overall directions but has lagged a few years. Malaysia has succeeded in the backend

The Research of Scrapped Automobiles Recycling and Disassembling Industry Development Based on Auto Industry Chain

Directory of Open Access Journals (Sweden)

linhua Pang

2015-01-01

Full Text Available The number of China’s scrapped car is on an explosively growing trend, and the development of scrapped car recycling industry has a golden prospect. The current scrapped car recycling system is not perfect in our country, because related industries driven by market develop slowly, and there are some outstanding problems such as potential safety risks, environmental pollution and resource waste. The paper analyzes and studies the existing problems and countermeasures to investigate the development strategy of scrapped car recycling industry according to the whole automobile industry chain construction, technology and equipment conditions, policy guidance, etc. and at last explore the new industrial development pattern of serving automobile reverse design.

Industry Returns and the Fisher Effect.

OpenAIRE

Boudoukh, Jacob; Richardson, Matthew; Whitelaw, Robert F

1994-01-01

The authors investigate the cross-sectional relation between industry-sorted stock returns and expected inflation, and they find that this relation is linked to cyclical movements in industry output. Stock returns of noncyclical industries tend to covary positively with expected inflation, while the reverse holds for cyclical industries. From a theoretical perspective, the authors describe a model that captures both (1) the cross-sectional variation in these relations across industries and (2...

Servitization in Industrial Firms

DEFF Research Database (Denmark)

Hsuan, Juliana; Frandsen, Thomas; Raja, Jawwad

This booklet outlines the breadth and depth of services offered by Danish manufacturing companies, aiming to provide a better understanding of the servitization landscape in Denmark. A total of 1,103 company websites have been checked against 16 service categories. Of these, 939 companies were...... analyzed in more detail, for example with regard to the types of services offered, company size, industry representation, turnover and earnings before interest and tax (EBIT). The analysis presented in this booklet may inspire Danish firms and help them, in their servitization journeys, to position...... themselves in relation to other companies in similar or related industries. In setting out a brief overview of the overall industrial service landscape in Denmark, the following is highlighted: - The extent to which Danish industrial firms are communicating service offerings through their websites...

Nuclear measurements in industry

International Nuclear Information System (INIS)

Rozsa, S.

1989-01-01

In this book the author provides a description of nuclear measurements in industry, covering the physical principles, methods, instruments and equipment, and industrial applications. One of the great advantages of industrial nuclear measurements is that their use ensures the optimum use of raw material. The increasing cost of raw materials makes it essential to adhere strictly to the standards and prescriptions related to the product and this is possible only by the application of continuous and accurate measurements. As a result, the importance of nuclear instruments is rapidly growing particularly in fields where the application of alternative methods is not possible. This is illustrated by several practical examples described in the book. Similarly important are nuclear measuring the process control equipment which serve to optimize the use of energy in industrial processes

Industry 4.0 and how purchasing can progress and benefit from the fourth industrial revolution

NARCIS (Netherlands)

Torn, Isaäc Anthony Robbert-Jan; Pulles, Niels Jaring; Schiele, Holger

2018-01-01

Since its’ announcement in 2011, the number of scientific publications on Industry 4.0 is growing exponentially. Significant investments by industrial firms, at present and planned for the coming years, indicate the expectations by the industry in terms of increased productivity because of the

49 CFR 8.31 - Industrial security.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Industrial security. 8.31 Section 8.31.../ACCESS Access to Information § 8.31 Industrial security. (a) Background. The National Industrial Security... industrial security services for the Department of Transportation. Regulations prescribed by the Secretary of...

Job Prospects for Industrial Engineers.

Science.gov (United States)

Basta, Nicholas

1988-01-01

Discusses 1987 statistics from the College Placement Council regarding new job offers to graduating industrial engineers. Identifies trends in hiring in the field. Describes several issues that will face industrial engineers. States that the industrial engineers most likely to win jobs are those with good basic mathematics and communications…

TRENDS IN CROATIAN HOTEL INDUSTRY

Directory of Open Access Journals (Sweden)

Jasmina GRZINIC

2008-01-01

Full Text Available Tourism and hotel business is becoming one of the leading industries of theworld. Therefore, an increased attention needs to be paid to the study oftrends in tourism because they determine the trends in hotel industry. Thepurpose of the paper is to point out the importance of hotel industry as one ofthe most important elements of development in tourist economies. The paperaims at introducing the newest trends in modern hotel industry and offering areview of the recent trends of demand and the directions of hotel industrydevelopment. The importance of hotel industry on both micro and macro, i.e.global level is increasing. Besides a series of theoretical representations andconclusions, this paper brings some concrete data and examples frompractice in hotel management.

The Tree of Industrial Life

DEFF Research Database (Denmark)

Andersen, Esben Sloth

2002-01-01

The purpose of this paper is to bring forth an interaction between evolutionary economics and industrial systematics. The suggested solution is to reconstruct the "family tree" of the industries. Such a tree is based on similarities, but it may also reflect the evolutionary history in industries....... For this purpose the paper shows how matrices of input-output coefficients can be transformed into binary characteristics matrices and to distance matrices, and it also discusses the possible evolutionary meaning of this translation. Then these derived matrices are used as inputs to algorithms for the heuristic...... finding of optimal industrial trees. The results are presented as taxonomic trees that can easily be compared with the hierarchical structure of existing systems of industrial classification....

Spring 2008 Industry Study: Financial Services Industry

National Research Council Canada - National Science Library

Calderon, Juan; Collins, Thomas W; Devinney, Edward; Driggers, Gene J; Dunmyer, Valrica; Flood, Paul; Gallant, Robin; Kekauoha, Stanford K; Krawietz, Anthony B; Kumashiro, Patrick T; LaDue, Paul W; LaFalce, John; Larson, Steven W; Lawrence, Steven J; Nettleton, John; Ostrowski, John A

2008-01-01

The extensive media coverage of the 2008 subprime crisis, both domestically and abroad, drives home the crucial role that the financial services industry plays for not only individual Americans, but for U.S. national security...

Industry-Education: One Community

Science.gov (United States)

Lee, Ivy, Jr.

1972-01-01

Contains text of a speech presented at one of eight 2-day regional forums which describes the activities of the Northern California Industry-Education Council, an organization designed to bring industry and education closer together. (SB)

[Health, hospitality sector and tobacco industry].

Science.gov (United States)

Abella Pons, Francesc; Córdoba Garcia, Rodrigo; Suárez Bonel, Maria Pilar

2012-11-01

To present the strategies used by the tobacco industry to meet government regulatory measures of its products. To demonstrate the relationship between tobacco industry and the hospitality sector. Note that the arguments and strategies used routinely by the hospitality industry have been previously provided by the tobacco industry. Location of key documents by meta-search, links to declassified documents, specific websites of the tobacco and hospitality industry, news sources and published articles in health journals. This review reveals the close relationship between tobacco industry and hospitality sector. It highlights the strategies carried out by the tobacco industry, including strategic hoarding of information, public relations, lobbying, consultation program, smoker defence groups, building partnerships, intimidation and patronage. The arguments and strategies used by the hospitality industry to match point by point that used by the tobacco industry. These arguments are refutable from the point of view of public health as it is scientifically proven that totally smoke-free environments are the only way to protect non-smokers from tobacco smoke exposure and its harmful effects on health. Copyright © 2011 Elsevier España, S.L. All rights reserved.

Industry 4.0 learning factory didactic design parameters for industrial engineering education in South Africa

Directory of Open Access Journals (Sweden)

Sackey, S. M.

2017-05-01

Full Text Available To manage the impact of Industry 4.0 on industrial engineering (IE education curriculum requirements, realistic teaching and learning infrastructure such as a learning factory are required. This paper scans the literature to determine Industry 4.0’s principles and interactions with IE and a learning factory, surveys relevant universities by questionnaire to determine its current status and practices, and formulates didactic design parameters for an Industry 4.0 learning factory to support IE education in South Africa, making use of existing models of cyber-physical systems and learning factory morphology. In other results, the technical universities are discovered to be more positively disposed, in general terms, to developing an Industry 4.0 learning factory than are the traditional programmes which, with one exception, prefer computational facilities. Of ten universities that offer IE, only one — a traditional programme — has made significant progress towards creating an Industry 4.0 learning factory.

Industrial sector

International Nuclear Information System (INIS)

Ainul Hayati Daud; Hazmimi Kasim

2010-01-01

The industrial sector is categorized as related to among others, the provision of technical and engineering services, supply of products, testing and troubleshooting of parts, systems and industrial plants, quality control and assurance as well as manufacturing and processing. A total of 161 entities comprising 47 public agencies and 114 private companies were selected for the study in this sector. The majority of the public agencies, 87 %, operate in Peninsular Malaysia. The remainders were located in Sabah and Sarawak. The findings of the study on both public agencies and private companies are presented in subsequent sections of this chapter. (author)

Energy industry

Science.gov (United States)

Staszak, Katarzyna; Wieszczycka, Karolina

2018-04-01

The potential sources of metals from energy industries are discussed. The discussion is organized based on two main metal-contains wastes from power plants: ashes, slags from combustion process and spent catalysts from selective catalytic NOx reduction process with ammonia, known as SCR. The compositions, methods of metals recovery, based mainly on leaching process, and their further application are presented. Solid coal combustion wastes are sources of various compounds such as silica, alumina, iron oxide, and calcium. In the case of the spent SCR catalysts mainly two metals are considered: vanadium and tungsten - basic components of industrial ones.

US Rocket Propulsion Industrial Base Health Metrics

Science.gov (United States)

Doreswamy, Rajiv

2013-01-01

The number of active liquid rocket engine and solid rocket motor development programs has severely declined since the "space race" of the 1950s and 1960s center dot This downward trend has been exacerbated by the retirement of the Space Shuttle, transition from the Constellation Program to the Space launch System (SLS) and similar activity in DoD programs center dot In addition with consolidation in the industry, the rocket propulsion industrial base is under stress. To Improve the "health" of the RPIB, we need to understand - The current condition of the RPIB - How this compares to past history - The trend of RPIB health center dot This drives the need for a concise set of "metrics" - Analogous to the basic data a physician uses to determine the state of health of his patients - Easy to measure and collect - The trend is often more useful than the actual data point - Can be used to focus on problem areas and develop preventative measures The nation's capability to conceive, design, develop, manufacture, test, and support missions using liquid rocket engines and solid rocket motors that are critical to its national security, economic health and growth, and future scientific needs. center dot The RPIB encompasses US government, academic, and commercial (including industry primes and their supplier base) research, development, test, evaluation, and manufacturing capabilities and facilities. center dot The RPIB includes the skilled workforce, related intellectual property, engineering and support services, and supply chain operations and management. This definition touches the five main segments of the U.S. RPIB as categorized by the USG: defense, intelligence community, civil government, academia, and commercial sector. The nation's capability to conceive, design, develop, manufacture, test, and support missions using liquid rocket engines and solid rocket motors that are critical to its national security, economic health and growth, and future scientific needs

Spring 2007. Industry Study. Manufacturing Industry

Science.gov (United States)

2007-01-01

their success. Each company advertised the world-class capabilities of their product, not its price. By contrast, a struggling company we visited in...business disruptions lurking within the Trojan Horse we have nestled in the US industrial base. It is important to note that a catastrophic disaster from

2016 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site’s Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond

Energy Technology Data Exchange (ETDEWEB)

Cafferty, Kara Grace [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-02-01

This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (WRU-I-0160-01, Modification 1, formerly LA 000160 01), for the wastewater reuse site at the Idaho National Laboratory Site’s Materials and Fuels Complex Industrial Waste Ditch and Industrial Waste Pond from November 1, 2015, through October 31, 2016.

REGIONALIZATION AND INTRA-INDUSTRY TRADE. AN ANALYSIS OF AUTOMOBILE INDUSTRY TRADE IN NAFTA

OpenAIRE

Sylvie MONTOUT; Jean-Louis MUCCHIELLI; Soledad ZIGNAGO

2002-01-01

As was shown in some previous studies, the creation of the North American Free Trade American (NAFTA) has significantly increased trade and investment flows between member countries. Consequently, it seems appropriate to analyze the incidences of the free trade agreement on the nature of trade. In this paper, we study the intra-industry trade in the automobile industry within the NAFTA area. Our results highlight an increase in intra-industry trade since the beginning of the 1990s. The import...

Modelling cooperation of industrial robots as multi-agent systems

Science.gov (United States)

Hryniewicz, P.; Banas, W.; Foit, K.; Gwiazda, A.; Sekala, A.

2017-08-01

Nowadays, more and more often in a cell is more than one robot, there is also a dual arm robots, because of this cooperation of two robots in the same space becomes more and more important. Programming robotic cell consisting of two or more robots are currently performed separately for each element of the robot and the cell. It is performed only synchronization programs, but no robot movements. In such situations often placed industrial robots so they do not have common space so the robots are operated separately. When industrial robots are a common space this space can occupy only one robot the other one must be outside the common space. It is very difficult to find applications where two robots are in the same workspace. It was tested but one robot did not do of movement when moving the second and waited for permission to move from the second when it sent a permit - stop the move. Such programs are very difficult and require a lot of experience from the programmer and must be tested separately at the beginning and then very slowly under control. Ideally, the operator takes care of exactly one robot during the test and it is very important to take special care.

The Social Industry

Directory of Open Access Journals (Sweden)

Christian Sandvig

2015-04-01

Full Text Available Historical mass media and contemporary social media are typically seen as opposites. “The culture industry” was the term used by the Frankfurt School in the 1940s to explain the emerging commercial mass media. The culture industry was portrayed as a semi-fascist apparatus of indoctrination. It selected cultural products and made them popular based on obscure determinations of economic value. In contrast, the common view of contemporary social media is that it is more democratic. Using voting algorithms and human voting, social media can finally realize widespread participation that was denied to the passive audiences of the mass media system. Social media appear to remove the bottleneck of the mass media system, allowing everyone to aspire to celebrity, or at least popularity. However, despite these appearances, social media have also now evolved into an elaborate system that selects social products and makes them popular based on obscure determinations of economic value. Social media platforms filter, censor, control, and train—and they may do so without the user’s awareness. Advances in computation now make a social media industry possible that is based on individual difference and action rather than sameness and passivity. But in other respects, the social industry resembles the culture industry: the co-option of culture has been superseded by the co-option of sociality. The word “social” may then be the biggest challenge facing those who study social media. Our task is to rescue genuine sociality from the emerging social industry.

The Industry That Can.

Science.gov (United States)

Aguirre, Edward

This speech by the U.S. Commissioner of Education reviews the education industry and education-industry relations. Examples illustrate the effective partnership that can be created to fashion and achieve successful vocational and career education programs. (MML)

Industrial recovered-materials-utilization targets for the metals and metal-products industry

Energy Technology Data Exchange (ETDEWEB)

None

1980-03-01

The National Energy Conservation Policy Act of 1978 directs DOE to set targets for increased utilization of energy-saving recovered materials for certain industries. These targets are to be established at levels representing the maximum feasible increase in utilization of recovered materials that can be achieved progressively by January 1, 1987 and is consistent with technical and economic factors. A benefit to be derived from the increased use of recoverable materials is in energy savings, as state in the Act. Therefore, emhasis on different industries in the metals sector has been related to their energy consumption. The ferrous industry (iron and steel, ferrour foundries and ferralloys), as defined here, accounts for approximately 3%, and all others for the remaining 3%. Energy consumed in the lead and zinc segments is less than 1% each. Emphasis is placed on the ferrous scrap users, followed by the aluminum and copper industries. A bibliography with 209 citations is included.

Radiation protection for industrial radiography in the aerospace industry

International Nuclear Information System (INIS)

Morgan, W.E.

1980-01-01

The Boeing Company employs 80 industrial radiographers, operates 90 radiation sources, and takes 10,000 exposures per month. This paper describes the major components of Boeing's radiation protection program: hazard analysis, facilities and equipment design, program administration, and evaluation. In the hazard analysis, each source of radiation is analyzed to determine its hazard and relationship to both man and the environment around it. Once the degree of the hazard is known, facilities and equipment are designed to contain the hazard. This can be anything from a four foot concrete shielded room for an industrial radiographic accelerator, to a piece of rope that isolates an Iridium-192 source during a field radiographic inspection on an aircraft. The administrative functions provide the necessary records, command media, and a radiation source certification program. This certification authorizes the source of radiation to be used under specific conditions agreed upon by both the Radiation Protection Organization and Industrial Radiography Management. The radiation protection program is evaluated through medical exams, personnel monitoring, and area radiation surveys. (H.K.)

Co-evolution of industry strategies and government policies: The case of the brazilian automotive industry

NARCIS (Netherlands)

Duarte, R.G. (Roberto Gonzalez); S.B. Rodrigues (Suzana)

2017-01-01

textabstractThis study examines the evolution of the automotive industry in Brazil and its key drivers. We argue that the rules of the game – industry policies – are an outcome of exchanges between the host government and industry. These arise from changes in economic and political environments and

Greening textile industry in Vietnam

NARCIS (Netherlands)

Nguyen Thi Phuong, L.

2011-01-01

The textile and garment industry has made a remarkable contribution to the economic development of Vietnam and employs currently a large labor force of 2.5 million people.However, the textile industry is also seen as a most polluting and unsustainable industry due to the use of

Market-opening rules and potentialities of destabilization of hierarchical power industries in an open economy: institutional scenarios on the French power industry

International Nuclear Information System (INIS)

Finon, D.

1999-08-01

The purpose of the paper is to analyse the reform of the French power industry, the extreme integration of the industrial organisation of which is deeply rooted in the French institutional particularisms. After the presentation of the main features of the 1999 reform, different elements of instability of the new structure are pointed out: the over-dominant position of the incumbent company which dissuades entries, institutional isomorphism between economies integrated to a regional space (heterogeneity of structures between European Community countries generates problems of reciprocity and fairness), and the end of the traditional capture of the regulator by the incumbent company because of the autonomy of the function of regulation. Two institutional scenarios are defined, which give a different weight to two competition paradigms in conflicts: the traditional ''industrial economics'' which inclines to preserve hierarchy in the national area to gain competitive advantages in the European field, and the neo-classical paradigm. In the first one, in the name of strategic efficiency, the integration of the industrial organisation could be preserved in spite of the asymmetry of structures between countries, and the playing field is the continental Europe on which national champions compete. In the second one the French industrial organisation has to conform to the competitive model, with vertical and horizontal disintegration and creation of a power exchange market. This scenario necessitates to test the force of the institutional determinism of the nuclear legacy. (author)

Petroleum industry in 2004; L'industrie petroliere en 2004

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This document presents a detailed outlook of the petroleum industry in the world and more particularly in France in 2005: evolution of crude oil prices; petroleum exploration and production in the world and in France; the French para-petroleum and petroleum industry; the oil supplies; the refining activities; the evolution of products quality and the substitution fuels; the domestic transports, the storage and consumption of petroleum products; the fiscality, prices and distribution of petroleum products. (J.S.)

Mapping of wine industry

Directory of Open Access Journals (Sweden)

Віліна Пересадько

2016-10-01

Full Text Available Having reviewed a variety of approaches to understanding the essence of wine industry, having studied the modern ideas about the future of wine industry, having analyzed more than 50 maps from the Internet we have set the trends and special features of wine industry mapping in the world, such as: - the vast majority of maps displays the development of the industry at regional or national level, whereas there are practically no world maps; - wine-growing regions are represented on maps very unevenly; - all existing maps of the industry could be classified as analytical ascertaining inventory type; - the dominant ways of cartographic representation are area method and qualitative background method, sign method and collation maps are rarely used; - basically all the Internet maps have low quality as they are scanned images with poor resolution; - the special feature of maps published lately is lack of geographical basis (except for state borders and coastline. We created wine production and consumption world map «Wine Industry» in the scale of 1:60 000 000 with simple geographical basis (state names, state borders, major rivers, coastline. It was concluded that from the methodological point of view it is incorrect not to show geographical basis on maps of wine industry. Analysis of this map allowed us to identify areas of traditional wine-making, potential wine-making areas and countries which claim to be the world leaders in the field of wine production. We found disbalans between wine production and wine consumption - increasing wine production in South America, China and the United States and increasing wine consumption (mainly due to the import products in countries where the grape is not the primary agricultural product.

Adaptive Granulation-Based Prediction for Energy System of Steel Industry.

Science.gov (United States)

Wang, Tianyu; Han, Zhongyang; Zhao, Jun; Wang, Wei

2018-01-01

The flow variation tendency of byproduct gas plays a crucial role for energy scheduling in steel industry. An accurate prediction of its future trends will be significantly beneficial for the economic profits of steel enterprise. In this paper, a long-term prediction model for the energy system is proposed by providing an adaptive granulation-based method that considers the production semantics involved in the fluctuation tendency of the energy data, and partitions them into a series of information granules. To fully reflect the corresponding data characteristics of the formed unequal-length temporal granules, a 3-D feature space consisting of the timespan, the amplitude and the linetype is designed as linguistic descriptors. In particular, a collaborative-conditional fuzzy clustering method is proposed to granularize the tendency-based feature descriptors and specifically measure the amplitude variation of industrial data which plays a dominant role in the feature space. To quantify the performance of the proposed method, a series of real-world industrial data coming from the energy data center of a steel plant is employed to conduct the comparative experiments. The experimental results demonstrate that the proposed method successively satisfies the requirements of the practically viable prediction.

Localisation for industrial development

CSIR Research Space (South Africa)

Bhugwandin, Ashley

2017-10-01

Full Text Available This presentation focuses on localisation for industrial development, and is presented by Ashley Bhugwandin at The 6th CSIR Conference: Ideas that work for industrial development, 5-6 October 2017, CSIR International Convention Centre, Pretoria...

On new industry creation and legitimation

DEFF Research Database (Denmark)

Turcan, Romeo V.; Fraser, Norman

The purpose of this paper is to discuss the process of creation and legitimation of new industries. Specifically, the question we address is how to cross the gulf between no industry and embryonic industry in order for a new industry to emerge. In this, our focus is on the process of change from...

PACS industry in Korea

Science.gov (United States)

Kim, Hee-Joung

2002-05-01

PACS industry in Korea has been rapidly growing, since government had supported collaborative PACS project between industry and university hospital. In the beginning, PACS industry had focused on developing peripheral PACS solutions, while the Korea PACS society was being formed. A few companies had started developing and installing domestic large-scale full-PACS system for teaching hospitals. Several years later, many hospitals have installed full-PACS system with national policy of reimbursement for PACS exams in November 1999. Both experiences of full-PACS installation and national policy generated tremendous intellectual and technological expertise about PACS at all levels, clinical, hospital management, education, and industrial sectors. There are now more than 20 domestic PACS companies. They have enough experiences which are capable of installing a truly full-PACS system for large-scale teaching hospitals. As an example, a domestic company had installed more than 40 full-PACS systems within 2-3 years. Enough experiences of full-PACS installation in Korea lead PACS industry to start exporting their full-PACS solutions. However, further understanding and timely implementation of continuously evolving international standard and integrated healthcare enterprise concepts may be necessary for international leading of PACS technologies for the future.

Self regulation in the methanol industry

International Nuclear Information System (INIS)

Hymas, R.; Wilkes, P.

1995-01-01

The methanol industry is not known for a high degree of self-regulation, as one can see from a glance at historic price volatility, and historic demand/supply curves. Industry enthusiasts spend considerable effort attempting to improve their understanding of the industry by analyzing the abundance of data produced within the industry about these topics, usually without resulting in any definitive correlations. Rational planning within the industry is hindered by these factors as well as the large number of new production facilities continuously being announced. Against this background however demand has significantly increased, supply has kept up with demand, methanol plants structured on a rational basis have continued to be built, and in spite of wildly fluctuating product prices all established members of the industry apparently flourish. Historic trends, new entrants, and industry achievements are discussed

Industrial power takes new directions

International Nuclear Information System (INIS)

Smith, D.J.

1992-01-01

The line between industrial power producers, non-utility power producers, and more specifically cogenerators, is no longer clear. Some industrials still own and operate their own power plants; others have become equity partners in third-party plants. Many industrial complexes have their steam and electrical power requirements supplied by third-party cogeneration plants. This paper reports that one of the major reasons industrial plants choose third-party cogeneration over self-generation is economics. Rather than spend capital on non-revenue projects such as power plants, manufacturers prefer to invest in profit-making ventures. Responding to the recent environmental awareness of many communities, industrial power plants are now collaborating with electric utilities to address environmental concerns. One way this is being accomplished is the dispatching of power plants for localized NO x reduction

Taxation of the energy industries

International Nuclear Information System (INIS)

Armstrong, G.

1995-01-01

Taxation of the energy industries is an issue of major importance for each energy sector. This has always been the situation for the primary fossil fuel sectors but, with corporatization and privatization, is now also an issue for the electricity supply industry. This article examines the most significant forms of taxation affecting the major industry sectors, namely secondary taxation, corporate taxation and, as a consequence of the corporatization and privatization of the electricity supply industry, surrogate taxation as it affects that industry. While essentially considering secondary taxation, the paper also reviews corporate and surrogate taxes. Tax exemptions for various energy sector activities such as mining operations, exploration and rehabilitation related activities are outlined. It is considered that there is insufficient evidence of the influence of taxation and other factors on electricity pricing. 2 tabs

Strategies for sustainable development of industrial park in Ulsan, South Korea--from spontaneous evolution to systematic expansion of industrial symbiosis.

Science.gov (United States)

Park, Hung-Suck; Rene, Eldon R; Choi, Soo-Mi; Chiu, Anthony S F

2008-04-01

The Korea National Cleaner Production Center (KNCPC) affiliated to the Korea Institute of Industrial Technology (KITECH) has started a 15 year, 3-phase EIP master plan with the support of Ministry of Commerce, Industry, and Energy (MOCIE). A total of 6 industrial parks, including industrial parks in Ulsan city, known as the industrial capital of South Korea, are planning projects to find the feasibility of shifting existing industrial parks to eco-industrial parks. The basic survey shows that Ulsan industrial complex has been continuously evolving from conventional industrial complexes to eco-industrial parks by spontaneous industrial symbiosis. This paper describes the Korean national policies and the developmental activities of this vision to drive the global trend of innovation for converting the existing industrial parks to eco-industrial parks through inter-industry waste, energy, and material exchange in Ulsan Industrial complexes. In addition, the primary and supportive components of the Ulsan EIP pilot project, which will be implemented for 5 years is elaborated with its schedules and economic benefits.

Uranium industry annual 1996

International Nuclear Information System (INIS)

1997-04-01

The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs

Industrial applications at GANIL

International Nuclear Information System (INIS)

Delagrange, H.

1993-01-01

After a first round of industrial applications using heavy ion beams, GANIL has refocused these activities along the lines defined by a strategy and market study. Heavy ion industrial applications take their roots in the physical effects of the interactions occurring between heavy ion projectiles and matter. Specific equipments operated by GANIL or CIRIL allow users to take benefit from these effects. By heavy ion irradiation, industrial companies qualify radiation hardened electronic components and sensitize plastic films to produce 'nuclear track' membranes. Research and development programs with laboratories of the public sector, focus on heavy ion lithography dedicated to large area luminescent flat screens with field emitter microtips and on tribology with radioactive implanted ions. Even sometimes facing difficulties to fill the gap between industry and research, GANIL is eager to promote heavy ion beam technologies. (author) 36 refs., 6 figs., 5 tabs

Industrial demonstration trials

International Nuclear Information System (INIS)

Gelee, M.; Fabre, C.; Villepoix, R. de; Fra, J.; Le Foulgoc, L.; Morel, Y.; Querite, P.; Roques, R.

1975-01-01

Prototypes of the plant components, meeting the specifications set by the process and built by industrial firms in collaboration with the supervisor and the C.E.A., are subjected to trial runs on the UF 6 test bench of the Pierrelatte testing zone. These items of equipment (diffuser, compressor, exchanger) are placed in an industrial operation context very similar to that of an enrichment plant. Their performance is measured within a broad region around the working point and their reliability observed over periods up to several tens of thousands of hours. Between 1969 and 1973 six industrial demonstration test benches have been built, marking the stages in the technical preparation of the 1973 file on the basis of which the decision of building was taken by Eurodif [fr

Aspects of the furniture industry in Ireland

OpenAIRE

Heanue, Kevin

2009-01-01

This dissertation examines aspects of networking, industrial organisation, innovation, and industrial agglomeration in the Irish furniture manufacturing industry. With its focus on firm behaviour, industrial organisation and industrial structure the research is located within the tradition of industrial economics. Based on heterodox economic perspectives and utilising a variety of methods (albeit principally case study based), the dissertation provides new theoretical and empirical knowle...

System analysis of industrial waste management: A case study of industrial plants located between Tehran and Karaj

Directory of Open Access Journals (Sweden)

Mohammad Amin Karami

2015-01-01

Full Text Available Aims: In this study, management of industrial waste in industries located between Tehran and Karaj in 2009-2010 was examined. Materials and Methods: This is a cross-sectional study which was done by site survey (Iranian environmental protection organization questionnaire usage and results analysis. This questionnaire was consisted of 45 questions about industrial waste, quantity, quality, and management. A total number of industries with over 50 employees was 283, and Stratified sampling method was used. Sample of size 50 was selected from 283cases. Results: The major hazardous waste-generating industries include chemical and plastic. Private sectors disposed 45% of generated waste. Majority of wastes were buried (62%, and only 17% of industrial waste was recycled. Conclusion: For hazardous waste reduction in this zone and health and economic attractions, the opportunity for reuse and recovery for these wastes must maximize in short-term and burial of industrial waste must be minimized. Industries such as chemical-plastic and electronics which have higher hazardous waste, in long-term, must be replaced with other industries such as wood cellulose and paper that have lower hazardous waste production rate.

An Impact Analysis of Regional Industry--University Interactions: The Case of Industrial PhD Schools

Science.gov (United States)

Gustavsson, Linda; Nuur, Cali; Söderlind, Johan

2016-01-01

The authors discuss Triple Helix collaborations in the context of regional competitiveness. Through an exploratory case study, they identify and analyse the impact of the establishment of industrial PhD schools for participating industry and universities. The study was conducted in Sweden in 2014 and focuses on three industry--university…

An Impact Analysis of Regional Industry-University Interactions: The Case of Industrial PhD Schools

Science.gov (United States)

Gustavsson, Linda; Nuur, Cali; Söderlind, Johan

2016-01-01

The authors discuss Triple Helix collaborations in the context of regional competitiveness. Through an exploratory case study, they identify and analyse the impact of the establishment of industrial PhD schools for participating industry and universities. The study was conducted in Sweden in 2014 and focuses on three industry-university…

Internationalization as a strategy to overcome industry barriers-An assessment of the marine energy industry

International Nuclear Information System (INIS)

Lovdal, Nicolai; Neumann, Frank

2011-01-01

Research on conditions to develop new innovations within emerging renewable energy industries is often done with a national focus. However, recent research on international entrepreneurship has revealed that firms operate on international levels very early in their life time. Thus, based on former research on international entrepreneurship and case examples, we build the propositions that firms in the marine energy industry use internationalization as a strategy to overcome industry barriers. Our primary source of data is a unique dataset from a global survey of all the companies in the marine energy industry who are aiming to commercialize a wave or tidal energy device. This paper is organized in two steps: first we identified the most challenging industry barriers perceived by companies. Second we use these to form propositions which we assess through empirical data. The two most challenging barriers perceived by the companies are need for capital and need for supportive political schemes. Our findings reveal that internationalization certainly is a common strategy to access capital and attractive support schemes in foreign countries. The early internationalization has implications for researchers, managers and policy makers. - Research highlights: → Industry barriers identified as access to capital and supportive political schemes. → International entrepreneurship is used to overcome industry barriers. → Start-ups in emerging energy industries 'shop' national support schemes. → Future research to provide policy advice should adapt to the international reality. → Research based on a worldwide survey of wave and tidal energy device developers.

Internationalization as a strategy to overcome industry barriers-An assessment of the marine energy industry

Energy Technology Data Exchange (ETDEWEB)

Lovdal, Nicolai, E-mail: nicolai.lovdal@iot.ntnu.n [Industrial Economics and Technology Management, Norwegian University of Science and Technology, 7491 Trondheim (Norway); Neumann, Frank, E-mail: frank@wave-energy-centre.or [Wave Energy Centre, Av. Manuel Maia, 36, r/c Dto., 1000-201 Lisboa (Portugal)

2011-03-15

Research on conditions to develop new innovations within emerging renewable energy industries is often done with a national focus. However, recent research on international entrepreneurship has revealed that firms operate on international levels very early in their life time. Thus, based on former research on international entrepreneurship and case examples, we build the propositions that firms in the marine energy industry use internationalization as a strategy to overcome industry barriers. Our primary source of data is a unique dataset from a global survey of all the companies in the marine energy industry who are aiming to commercialize a wave or tidal energy device. This paper is organized in two steps: first we identified the most challenging industry barriers perceived by companies. Second we use these to form propositions which we assess through empirical data. The two most challenging barriers perceived by the companies are need for capital and need for supportive political schemes. Our findings reveal that internationalization certainly is a common strategy to access capital and attractive support schemes in foreign countries. The early internationalization has implications for researchers, managers and policy makers. - Research highlights: {yields} Industry barriers identified as access to capital and supportive political schemes. {yields} International entrepreneurship is used to overcome industry barriers. {yields} Start-ups in emerging energy industries 'shop' national support schemes. {yields} Future research to provide policy advice should adapt to the international reality. {yields} Research based on a worldwide survey of wave and tidal energy device developers.

Strategic Alliances in the European Industries of the Third Industrial Revolution

Directory of Open Access Journals (Sweden)

Angel Calvo

2016-07-01

Full Text Available The dimension of the alliances has compelled experts to revise their preconceptions about the internationalization of companies and to include this strategy in their models as Uppsala model was forced to acknowledge. This article focuses on one of the alliances forged in Europe, very deviated from the practices of the majority because it was a company with exclusively European partners. It adopts the perspective of a peripheral country (Spain in the global economy and from the special status of at least one of the partners in a monopoly. Finally, the article follows case study methodology, which aims to delve into the complexity of the processes and the phenomena at hand. The article responds to the need for an alternative approach to industry analysis that is particularly important for technology-based industries and the most turbulent high-tech industries.  The first section examines the creation of European Silicon Structures as a strategic alliance in the European semiconductor industry. Parts two and three look at the case of Spain and the role of demand using the example of Telefonica. Conclusions are presented in the final section.

29 CFR 779.323 - Particular industry.

Science.gov (United States)

2010-07-01

... present no difficulty. The sale of clothes, for example, belongs to the clothing industry and the sale of... 29 Labor 3 2010-07-01 2010-07-01 false Particular industry. 779.323 Section 779.323 Labor... Retail âin the Particular Industryâ § 779.323 Particular industry. In order to determine whether a sale...

Probabilistic safety assessment in the chemical and nuclear industries

CERN Document Server

Fullwood, Ralph R

2000-01-01

Probabilistic Safety Analysis (PSA) determines the probability and consequences of accidents, hence, the risk. This subject concerns policy makers, regulators, designers, educators and engineers working to achieve maximum safety with operational efficiency. Risk is analyzed using methods for achieving reliability in the space program. The first major application was to the nuclear power industry, followed by applications to the chemical industry. It has also been applied to space, aviation, defense, ground, and water transportation. This book is unique in its treatment of chemical and nuclear risk. Problems are included at the end of many chapters, and answers are in the back of the book. Computer files are provided (via the internet), containing reliability data, a calculator that determines failure rate and uncertainty based on field experience, pipe break calculator, event tree calculator, FTAP and associated programs for fault tree analysis, and a units conversion code. It contains 540 references and many...

Application of Specific Features of Industrial Products when Forming and Developing Brands of Industrial Enterprises

Directory of Open Access Journals (Sweden)

Yatsentiuk Stanislav V.

2014-03-01

Full Text Available The article analyses and structures approaches and principles of formulation of industrial products. It offers classification of goods and markets of industrial products by their characteristics and participants. It identifies main participants that make decisions at B2C and B2B markets and characterises their specific features and motivation when making decisions on purchase of products of industrial enterprises. It studies and analyses indicators of development of domestic markets of consumer goods and market of industrial products and dynamics of development of their relation in retrospective view.

Energy efficient industrialized housing research program

Energy Technology Data Exchange (ETDEWEB)

Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Mazwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

1989-12-01

This document describes the research work completed in five areas in fiscal year 1989. (1) The analysis of the US industrialized housing industry includes statistics, definitions, a case study, and a code analysis. (2) The assessment of foreign technology reviews the current status of design, manufacturing, marketing, and installation of industrialized housing primarily in Sweden and Japan. (3) Assessment of industrialization applications reviews housing production by climate zone, has a cost and energy comparison of Swedish and US housing, and discusses future manufacturing processes and emerging components. (4) The state of computer use in the industry is described and a prototype design tool is discussed. (5) Side by side testing of industrialized housing systems is discussed.

Real-world educational experience through project-oriented graduate classes in collaboration with industry

Science.gov (United States)

Zurbuchen, Thomas H.

2007-04-01

There is a need for a motivated and innovative work force for the U.S. aerospace industry. The education of such engineers and scientists typically revolves around a fundamental knowledge of basic important technologies, such as the mechanics relevant to orbit-design, structures, avionics, and many others. A few years ago, the University of Michigan developed a Masters of Engineering program that provides students with skills that are not taught as part of a typical engineering curriculum. This program is focused on open problem solving, space systems, and space policy, as well as other classes that further their understanding of the connections between technologies and the nontechnical aspects of managing a space mission. The value of such an education is substantially increased through a direct connection to industry. An innovative problem-oriented approach has been developed that enables direct connections between industry and classroom teaching. The class works as a system study group and addresses problems of interest to and defined by a company with a specific application. We discuss such an application, a near-space lidar wind measurement system to enhance weather predictions, as well as the approach taken to link educational rationales.

RESTRUCTURING OF INDUSTRIAL ENTERPRISE

Directory of Open Access Journals (Sweden)

L. I. Podderegina

2009-01-01

Full Text Available The paper presents main principles for execution of current and strategic restructuring of national enterprises while using experience of countries with developed market economy. The principles contribute to higher efficiency in internal industrial relations at national industrial enterprises.

Oregon's forest products industry: 1994.

Science.gov (United States)

Franklin R. Ward

1997-01-01

This report presents the findings of a survey of primary forest products industries in Oregon for 1994. The survey included the following sectors: lumber; veneer; pulp and board; shake and shingle; export; and post, pole, and piling. Tables, presented by sector and for the industry as a whole, include characteristics of the industry, nature and flow of logs consumed,...

Globalization of the natural gas industry; La mondialisation de l`industrie du gaz naturel

Energy Technology Data Exchange (ETDEWEB)

Deyirmendjan, J. [Gaz de France (GDF), 75 - Paris (France)

1997-05-01

After presenting a panorama of the international gas industry, a description of changes affecting the world gas industry, and an analysis of how environment-related demands give gas an opportunity to become the leading source of energy in the 21. century, Mr Jacques Deyirmendjan, Senior Executive-Vice-President of Gaz de France, tells his interviewer how French industry and national companies are designing their strategies to respond effectively to these changes.

Self-Confidence in the Hospitality Industry

Directory of Open Access Journals (Sweden)

Michael Oshins

2014-02-01

Full Text Available Few industries rely on self-confidence to the extent that the hospitality industry does because guests must feel welcome and that they are in capable hands. This article examines the results of hundreds of student interviews with industry professionals at all levels to determine where the majority of the hospitality industry gets their self-confidence.

KECELAKAAN KERJA DAN CEDERA YANG DIALAMI OLEH PEKERJA INDUSTRI DI KAWASAN INDUSTRI PULO GADUNG JAKARTA

Directory of Open Access Journals (Sweden)

Woro Riyadina

2007-06-01

Full Text Available Occupational Accident and Injury on Industrial Workers in Jakarta Pulo Gadung Industrial Estate. Occupational accidents are stil high. There were 17 workers death each workday. Human factor is main caused risk factor of occupational accident. The objective of study to determine type of accidents and injuries related with accident at workplace in Pulogadung Industrial Estare. The study was operational research with cross sectional design. The study conducted 950 industrial workers at seven companies in 2006. Respondents were industrial workers who were worked in Jakarta Pulogadung industrial estate. Data collected based on interview with questionnaire and analyzed with statistic analysis. Result showed that industrial workers have ever been accident at workplace 29.9% with injury on hinge-hip-upper leg (40.2%, head (24,8% and hand ankle (14.3%. Type of injuries were excoriasi (37.2%, superficial (29.6% and an eyes injury (14.8%. Occupational accident often occurence on steel industry (11.2% with an eyes injury (10%, spare part industry (8.2% with pierced (6.1% andi garment industries (3.7% with pierced (43.1%. Occupational aacident correlated with male workers OR 3.25 (95% CI 2.29–4.62, moderate level of activity OR 2.08 (95% CI 1.48–2.92, distres OR 1.36 (95% CI 1.03–1.80, painful OR 1.50 (95%CI 1.13–1.98, and using safety tools OR 1.50 (95% CI 1.13–1.98. Physical condition correlated with occupational accident such as noisy OR 2.24 (95% CI 1.66–3.03, heat OR 2.19 (95%CI 1.63–2.93, close OR 2.32 (95%CI 1.57–3.41, extreme scent OR 2.01 (95%CI 1.42–2.85, dusty OR 1.87 (95%CI 1.41–2.48 and smoky OR 2.40 (95%CI 1.77–3.25.

About the new industrial production management concept as the company strategy in the fourth industrial revolution

Directory of Open Access Journals (Sweden)

Kovalchuk Julia

2017-01-01

Full Text Available The new industrial production management requires a review of the third industrial revolution results and accounting for mass adoption of information and communication technologies to create the organizational basis of the fourth industrial revolution. The future changes will affect all components of the organization and management components of industrial enterprises, forming the potential of new competitive advantages in a global economy. The research included the identification of key factors of formation, development and destruction (absorption related branches of knowledge the industrial production management as the theory and practical activities, given the critical approach to its nature and processes. Revealed common signs of the industrial production management need as a field of knowledge in the framework of previous and current industrial revolutions. It is shown that the industrial production management effectively solves the problem of subsistence economy, and substantiates that the modern digital economy also has the characteristics of subsistence economy. It is important the necessity of formulation of a new organizational thinking, the implementation of which is possible in the modern interpretation of the project office. The article represents the theoretical basis for developing practical recommendations for the formation of the new concept of industrial production management to take advantage of the impact of engineering component on the economic results and the creation of project offices for the development of traditional and created markets in the organization of a new production mode (based on the digital economy.

Harnessing the potential - Atlantic Canada's oil and gas industry : Newfoundland Ocean Industries special releases or publications

International Nuclear Information System (INIS)

1998-07-01

A comprehensive overview of Atlantic Canada's oil and gas industry is presented, demonstrating the importance of oil and gas resources and their related industries to Atlantic Canada. The objective of the report is to provide a basis for a strategy to optimize opportunities within the region from the oil and gas sector. The report reviews the current status of the industry, including the region's resource potential and the oil and gas developments currently underway. The evolution of the oil and gas industry is discussed in terms of value chain components. A broad assessment of the region's supply, labour force, infrastructure, training, and research and development capabilities is presented, followed by a description of the industry's potential, its regulatory framework and the barriers and constraints affecting industry development. Appendices contain a chronological history of major events in Atlantic Canada's oil and gas industry (Appendix A); and overview of the Atlantic Accord and the Canada-Nova Scotia Accord's equalization offset provisions (Appendix B); a value chain matrix, detailing some 60 categories of industry requirements and a capsule assessment of the region's ability to meet them (Appendix C); and a listing of research and development institutions in Atlantic Canada, including their areas of specialization (Appendix D)

Economic Aspects of the Chemical Industry

Science.gov (United States)

Koleske, Joseph V.

Within the formal disciplines of science at traditional universities, through the years, chemistry has grown to have a unique status because of its close correspondence with an industry and with a branch of engineering—the chemical industry and chemical engineering. There is no biology industry, but aspects of biology have closely related disciplines such as fish raising and other aquaculture, animal cloning and other facets of agriculture, ethical drugs of pharmaceutical manufacture, genomics, water quality and conservation, and the like. Although there is no physics industry, there are power generation, electricity, computers, optics, magnetic media, and electronics that exist as industries. However, in the case of chemistry, there is a named industry. This unusual correspondence no doubt came about because in the chemical industry one makes things from raw materials—chemicals—and the science, manufacture, and use of chemicals grew up together during the past century or so.

University-Industry Interaction: Reserach and Career Opportunities - Good for Industry, Faculty and Students

Science.gov (United States)

Schneider, John

1997-03-01

Industry sponsorship of research at universities is growing and becoming more important as funding resources change. In addition, re-engineering at industries has forced them to review how and what they sponsor at universities. Well thought out and understood "partnerships" between companies and universities can be good for everyone. Students receive scholarships, research opportunities, exposure to industry life and career/job opportunities. Faculty receive funds for their research, exposure to real-world problems, equipment, consulting opportunities and more. . Universities receive funds for research, scholarships, etc. In addition, there are opportunities for royalties and donations that help everyone. . The public gains trained students, research advances that lead to better and lower cost products, and economic growth. A concern faculty often express is that they would have to do "applied" and not leading edge research. It is true that industry will not fund "any" research; they want to support research that solves their current needs or could lead to break-throughs in products they can commercialize. Many industrial scientists counter academic concerns by stating that doing practical research can and usually is fundamental and discovery oriented. University-Industry collaboration research has been good for all and can continue to be so. Leading organizations such as the National Science Foundation and the Council on Competitiveness are stressing the need for collaborative partnerships. Universities are creating education programs that bring the basic sciences in contact with the applied world.

Industry's role in inertial fusion

International Nuclear Information System (INIS)

Glass, A.J.

1983-01-01

This paper is an address to the Tenth Symposium on Fusion Engineering. The speaker first addressed the subject of industry's role in inertial fusion three years earlier in 1980, outlining programs that included participation in the Shiva construction project, and the industrial participants' program set up in the laser fusion program to bring industrial scientists and engineers into the laboratory to work on laser fusion. The speaker is now the president of KMS Fusion, Inc., the primary industrial participant in the inertial fusion program. The outlook for fusion energy and the attitude of the federal government toward the fusion program is discussed

Chemistry-Climate Interactions in the Goddard Institute for Space Studies General Circulation Model. 2; New Insights into Modeling the Pre-Industrial Atmosphere

Science.gov (United States)

Grenfell, J. Lee; Shindell, D. T.; Koch, D.; Rind, D.; Hansen, James E. (Technical Monitor)

2002-01-01

We investigate the chemical (hydroxyl and ozone) and dynamical response to changing from present day to pre-industrial conditions in the Goddard Institute for Space Studies General Circulation Model (GISS GMC). We identify three main improvements not included by many other works. Firstly, our model includes interactive cloud calculations. Secondly we reduce sulfate aerosol which impacts NOx partitioning hence Ox distributions. Thirdly we reduce sea surface temperatures and increase ocean ice coverage which impact water vapor and ground albedo respectively. Changing the ocean data (hence water vapor and ozone) produces a potentially important feedback between the Hadley circulation and convective cloud cover. Our present day run (run 1, control run) global mean OH value was 9.8 x 10(exp 5) molecules/cc. For our best estimate of pre-industrial conditions run (run 2) which featured modified chemical emissions, sulfate aerosol and sea surface temperatures/ocean ice, this value changed to 10.2 x 10(exp 5) molecules/cc. Reducing only the chemical emissions to pre-industrial levels in run 1 (run 3) resulted in this value increasing to 10.6 x 10(exp 5) molecules/cc. Reducing the sulfate in run 3 to pre-industrial levels (run 4) resulted in a small increase in global mean OH (10.7 x 10(exp 5) molecules/cc). Changing the ocean data in run 4 to pre-industrial levels (run 5) led to a reduction in this value to 10.3 x 10(exp 5) molecules/cc. Mean tropospheric ozone burdens were 262, 181, 180, 180, and 182 Tg for runs 1-5 respectively.