WorldWideScience

Sample records for south java earthquake

  1. Identifying Intraplate Mechanism by B-Value Calculations in the South of Java Island

    Science.gov (United States)

    Bagus Suananda Y., Ida; Aufa, Irfan; Harlianti, Ulvienin

    2018-03-01

    Java is the most populous island in Indonesia with 50 million people live there. This island geologically formed at the Eurasia plate margin by the subduction of the Australian oceanic crust. At the south part of Java, beside the occurrence of 2-plate convergence earthquake (interplate), there are also the activities of the intraplate earthquake. Research for distinguish this 2 different earthquake type is necessary for estimating the behavior of the earthquake that may occur. The aim of this research is to map the b-value in the south of Java using earthquake data from 1963 until 2008. The research area are divided into clusters based on the epicenter mapping results with magnitude more than 4 and three different depth (0-30 km, 30-60 km, 60-100 km). This location clustering indicate group of earthquakes occurred by the same structure or mechanism. On some cluster in the south of Java, b-value obtained are between 0.8 and 1.25. This range of b-value indicates the region was intraplate earthquake zone, with 0.72-1.2 b-value range is the indication of intraplate earthquake zone. The final validation is to determine the mechanism of a segment done by correlating the epicenter and b-value plot with the available structural geology data. Based on this research, we discover that the earthquakes occur in Java not only the interplate earthquake, the intraplate earthquake also occurred here. By identifying the mechanism of a segment in the south of Java, earthquake characterization that may occur can be done for developing the accurate earthquake disaster mitigation system.

  2. A preliminary study of paleotsunami deposit along the south coast of East Java: Pacitan-Banyuwangi

    International Nuclear Information System (INIS)

    Anugrah, Suci D.; Istiyanati; Zaim, Yahdi; Rizal, Yan; Aswan

    2015-01-01

    Along the southern coast of East Java Indonesia, at a number of localities, it can be identified and attempted to assign the age of tsunami deposit. Laboratory analyses were conducted also to support this study such as Granulometry, Paleontology and radiometric dating analysis. The presence of tsunami 1994 deposit in the area of Pancer, Lampon, Prigi and Grajagan was found, as a result of 7.8 Magnitude Banyuwangi Earthquake. The radiometric dating analysis also identified some paleotsunami deposit of about 1921 and 1930 in the area of Prigi and Teleng. This paleotsunami is assumed to have a correlation with an earthquake in the south of Java at the same time. An outcrop in the Prigi and Teleng strongly convinced the fact of an earthquake generated tsunami in the south of Java in the year of about 1921 and 1930

  3. A preliminary study of paleotsunami deposit along the south coast of East Java: Pacitan-Banyuwangi

    Energy Technology Data Exchange (ETDEWEB)

    Anugrah, Suci D.; Istiyanati [Tsunami Mitigation Division - Meteorogical Climatologycal and Geophysical Agency, Jakarta (Indonesia); Zaim, Yahdi; Rizal, Yan; Aswan [Geology Department, Faculty of Earth Sciences and Technology - Bandung Institute of Technolog, Bandung (Indonesia)

    2015-04-24

    Along the southern coast of East Java Indonesia, at a number of localities, it can be identified and attempted to assign the age of tsunami deposit. Laboratory analyses were conducted also to support this study such as Granulometry, Paleontology and radiometric dating analysis. The presence of tsunami 1994 deposit in the area of Pancer, Lampon, Prigi and Grajagan was found, as a result of 7.8 Magnitude Banyuwangi Earthquake. The radiometric dating analysis also identified some paleotsunami deposit of about 1921 and 1930 in the area of Prigi and Teleng. This paleotsunami is assumed to have a correlation with an earthquake in the south of Java at the same time. An outcrop in the Prigi and Teleng strongly convinced the fact of an earthquake generated tsunami in the south of Java in the year of about 1921 and 1930.

  4. Earthquake hypocenter relocation using double difference method in East Java and surrounding areas

    International Nuclear Information System (INIS)

    C, Aprilia Puspita; Nugraha, Andri Dian; Puspito, Nanang T

    2015-01-01

    Determination of precise hypocenter location is very important in order to provide information about subsurface fault plane and for seismic hazard analysis. In this study, we have relocated hypocenter earthquakes in Eastern part of Java and surrounding areas from local earthquake data catalog compiled by Meteorological, Climatological, and Geophysical Agency of Indonesia (MCGA) in time period 2009-2012 by using the double-difference method. The results show that after relocation processes, there are significantly changes in position and orientation of earthquake hypocenter which is correlated with the geological setting in this region. We observed indication of double seismic zone at depths of 70-120 km within the subducting slab in south of eastern part of Java region. Our results will provide useful information for advance seismological studies and seismic hazard analysis in this study

  5. Earthquake hypocenter relocation using double difference method in East Java and surrounding areas

    Energy Technology Data Exchange (ETDEWEB)

    C, Aprilia Puspita [Geophysical Engineering Program, Faculty of Mining and Petroleum Engineering, Institute of Technology Bandung (Indonesia); Meteorological, Climatological, and Geophysical Agency (MCGA) of Indonesian, Jakarta (Indonesia); Nugraha, Andri Dian, E-mail: nugraha@gf.itb.ac.id [Geophysical Engineering Program, Faculty of Mining and Petroleum Engineering, Institute of Technology Bandung (Indonesia); Puspito, Nanang T [Global Geophysical Research Group, Faculty of Mining and Petroleum Engineering, Institute of Technology Bandung (Indonesia)

    2015-04-24

    Determination of precise hypocenter location is very important in order to provide information about subsurface fault plane and for seismic hazard analysis. In this study, we have relocated hypocenter earthquakes in Eastern part of Java and surrounding areas from local earthquake data catalog compiled by Meteorological, Climatological, and Geophysical Agency of Indonesia (MCGA) in time period 2009-2012 by using the double-difference method. The results show that after relocation processes, there are significantly changes in position and orientation of earthquake hypocenter which is correlated with the geological setting in this region. We observed indication of double seismic zone at depths of 70-120 km within the subducting slab in south of eastern part of Java region. Our results will provide useful information for advance seismological studies and seismic hazard analysis in this study.

  6. Localized surface disruptions observed by InSAR during strong earthquakes in Java and Hawai'i

    Science.gov (United States)

    Poland, M.

    2010-01-01

    Interferometric Synthetic Aperture Radar data spanning strong earthquakes on the islands of Java and Hawai‘i in 2006 reveal patches of subsidence and incoherence indicative of localized ground failure. Interferograms spanning the 26 May 2006 Java earthquake suggest an area of about 7.5 km2 of subsidence (~2 cm) and incoherence south of the city of Yogyakarta that correlates with significant damage to housing, high modeled peak ground accelerations, and poorly consolidated geologic deposits. The subsidence and incoherence is inferred to be a result of intense shaking and/or damage. At least five subsidence patches on the west side of the Island of Hawai‘i, ranging 0.3–2.2 km2 in area and 3–8 cm in magnitude, occurred as a result of a pair of strong earthquakes on 15 October 2006. Although no felt reports or seismic data are available from the areas in Hawai‘i, the Java example suggests that the subsidence patches indicate areas of amplified earthquake shaking. Surprisingly, all subsidence areas in Hawai‘i were limited to recent, and supposedly stable, lava flows and may reflect geological conditions not detectable at the surface. In addition, two ‘a‘ā lava flows in Hawai‘i were partially incoherent in interferograms spanning the earthquakes, indicating surface disruption as a result of the earthquake shaking. Coearthquake incoherence of rubbly deposits, like ‘a‘ā flows, should be explored as a potential indicator of earthquake intensity and past strong seismic activity.

  7. Geological structure analysis in Central Java using travel time tomography technique of S waves

    International Nuclear Information System (INIS)

    Palupi, I. R.; Raharjo, W.; Nurdian, S. W.; Giamboro, W. S.; Santoso, A.

    2016-01-01

    Java is one of the islands in Indonesia that is prone to the earthquakes, in south of Java, there is the Australian Plate move to the Java island and press with perpendicular direction. This plate movement formed subduction zone and cause earthquakes. The earthquake is the release of energy due to the sudden movement of the plates. When an earthquake occurs, the energy is released and record by seismometers in the waveform. The first wave recorded is called the P waves (primary) and the next wave is called S waves (secondary). Both of these waves have different characteristics in terms of propagation and direction of movement. S wave is composed of waves of Rayleigh and Love waves, with each direction of movement of the vertical and horizontal, subsurface imaging by using S wave tomography technique can describe the type of the S wave through the medium. The variation of wave velocity under Central Java (esearch area) is ranging from -10% to 10% at the depth of 20, 30 and 40 km, the velocity decrease with the depth increase. Moho discontinuity is lies in the depth of 32 km under the crust, it is indicates there is strong heterogenity in Moho. (paper)

  8. Earthquake Disaster of Yogyakarta and Central Java, and Disaster Reduction, Indonesia

    Directory of Open Access Journals (Sweden)

    Sutikno Sutikno

    2016-05-01

    Full Text Available This paper discussed on earthquake disaster and its reduction of Yogyakarta and Central Java, Indonesia. The study area is located at relatively a short distance from subduction zone of India-Australian and Eurasian plates. Geologically this area is characterized by fault and graben structure, and geomorphologically is composed of block mountain, karsts topography and fluvio-volcanic plain. Aim of this paper is to evaluate the spatial distribution of the damage area, the environmental impacts, and to discuss the risk reduction of earthquake disaster scientifically and practically. In this paper to determine the hazard susceptibility zone and their environmental impact used geologic, geomorphologic, land use map, remote sensing image interpretation, and field observation. Discussion on the earthquake disaster risk reduction based on the hazard susceptibility and the characteristic of the human settlement and facilities. The result of this study shows that: i.the high damage area associate with distribution of the fault structures and the lithology; ii. mass-movement, lowering of groundwater, rising new springs, liquefaction, cracking of rocks and land surface; iii. structural non structural efforts are used for earthquake disaster reduction.

  9. Micro-seismic earthquakes characteristics at natural and exploited hydrothermal systems in West Java, Indonesia

    Science.gov (United States)

    Jousset, P. G.; Jaya, M. S.; Sule, R.; Diningrat, W.; Gassner, A.; Akbar, F.; Ryannugroho, R.; Hendryana, A.; Kusnadi, Y.; Syahbana, D.; Nugraha, A. D.; Umar, M.; Indrinanto, Y.; Erbas, K.

    2013-12-01

    The assessment of geothermal resources requires the understanding of the structure and the dynamics of geothermal reservoirs. We deployed a multidisciplinary geophysical network around geothermal areas in the south of Bandung, West Java, Indonesia. The first deployment included a network of 30 broadband and 4 short-period seismic stations with Güralp and Trillium sensors (0.008 - 100 Hz) since October 2012. In a second step, we extended the network in June 2013 with 16 short-period (1 Hz) seismometers. We describe the set-up of the seismic networks and discuss first observations and results. The co-existence of a large variety of intense surface manifestations like geysers, hot-steaming grounds, hot water pools, and active volcanoes suggest an intimate coupling between volcanic, tectonic and hydrothermal processes in this area. Preliminary location of earthquakes is performed using a non-linear algorithm, which allows us to define at least 3 seismic clusters. We discuss this seismic pattern within the geothermal fields.

  10. One dimensional P wave velocity structure of the crust beneath west Java and accurate hypocentre locations from local earthquake inversion

    International Nuclear Information System (INIS)

    Supardiyono; Santosa, Bagus Jaya

    2012-01-01

    A one-dimensional (1-D) velocity model and station corrections for the West Java zone were computed by inverting P-wave arrival times recorded on a local seismic network of 14 stations. A total of 61 local events with a minimum of 6 P-phases, rms 0.56 s and a maximum gap of 299° were selected. Comparison with previous earthquake locations shows an improvement for the relocated earthquakes. Tests were carried out to verify the robustness of inversion results in order to corroborate the conclusions drawn out from our reasearch. The obtained minimum 1-D velocity model can be used to improve routine earthquake locations and represents a further step toward more detailed seismotectonic studies in this area of West Java.

  11. One dimensional P wave velocity structure of the crust beneath west Java and accurate hypocentre locations from local earthquake inversion

    Energy Technology Data Exchange (ETDEWEB)

    Supardiyono; Santosa, Bagus Jaya [Physics Department, Faculty of Mathematics and Natural Sciences, State University of Surabaya, Surabaya (Indonesia) and Physics Department, Faculty of Mathematics and Natural Sciences, Sepuluh Nopember Institute of Technology, Surabaya (Indonesia); Physics Department, Faculty of Mathematics and Natural Sciences, Sepuluh Nopember Institute of Technology, Surabaya (Indonesia)

    2012-06-20

    A one-dimensional (1-D) velocity model and station corrections for the West Java zone were computed by inverting P-wave arrival times recorded on a local seismic network of 14 stations. A total of 61 local events with a minimum of 6 P-phases, rms 0.56 s and a maximum gap of 299 Degree-Sign were selected. Comparison with previous earthquake locations shows an improvement for the relocated earthquakes. Tests were carried out to verify the robustness of inversion results in order to corroborate the conclusions drawn out from our reasearch. The obtained minimum 1-D velocity model can be used to improve routine earthquake locations and represents a further step toward more detailed seismotectonic studies in this area of West Java.

  12. Evidence of Multiple Ground-rupturing Earthquakes in the Past 4000 Years along the Pasuruan Fault, East Java, Indonesia

    Science.gov (United States)

    Marliyani, G. I.; Arrowsmith, R.; Helmi, H.

    2015-12-01

    Instrumental and historical records of earthquakes, supplemented by paleoeseismic constraints can help reveal the earthquake potential of an area. The Pasuruan fault is a high angle normal fault with prominent youthful scarps cutting young deltaic sediments in the north coast of East Java, Indonesia and may pose significant hazard to the densely populated region. This fault has not been considered a significant structure, and mapped as a lineament with no sense of motion. Information regarding past earthquakes along this fault is not available. The fault is well defined both in the imagery and in the field as a ~13km long, 2-50m-high scarp. Open and filled fractures and natural exposures of the south-dipping fault plane indicate normal sense of motion. We excavated two fault-perpendicular trenches across a relay ramp identified during our surface mapping. Evidence for past earthquakes (documented in both trenches) includes upward fault termination with associated fissure fills, colluvial wedges and scarp-derived debris, folding, and angular unconformities. The ages of the events are constrained by 23 radiocarbon dates on detrital charcoal. We calibrated the dates using IntCal13 and used Oxcal to build the age model of the events. Our preliminary age model indicates that since 2006±134 B.C., there has been at least five ground rupturing earthquakes along the fault. The oldest event identified in the trench however, is not well-dated. Our modeled 95th percentile ranges of the next four earlier earthquakes (and their mean) are A.D. 1762-1850 (1806), A.D. 1646-1770 (1708), A.D. 1078-1648 (1363), and A.D. 726-1092 (909), yielding a rough recurrence rate of 302±63 yrs. These new data imply that Pasuruan fault is more active than previously thought. Additional well-dated earthquakes are necessary to build a solid earthquake recurrence model. Rupture along the whole section implies a minimum earthquake magnitude of 6.3, considering 13km as the minimum surface rupture

  13. Java Programs for Using Newmark's Method and Simplified Decoupled Analysis to Model Slope Performance During Earthquakes

    Science.gov (United States)

    Jibson, Randall W.; Jibson, Matthew W.

    2003-01-01

    Landslides typically cause a large proportion of earthquake damage, and the ability to predict slope performance during earthquakes is important for many types of seismic-hazard analysis and for the design of engineered slopes. Newmark's method for modeling a landslide as a rigid-plastic block sliding on an inclined plane provides a useful method for predicting approximate landslide displacements. Newmark's method estimates the displacement of a potential landslide block as it is subjected to earthquake shaking from a specific strong-motion record (earthquake acceleration-time history). A modification of Newmark's method, decoupled analysis, allows modeling landslides that are not assumed to be rigid blocks. This open-file report is available on CD-ROM and contains Java programs intended to facilitate performing both rigorous and simplified Newmark sliding-block analysis and a simplified model of decoupled analysis. For rigorous analysis, 2160 strong-motion records from 29 earthquakes are included along with a search interface for selecting records based on a wide variety of record properties. Utilities are available that allow users to add their own records to the program and use them for conducting Newmark analyses. Also included is a document containing detailed information about how to use Newmark's method to model dynamic slope performance. This program will run on any platform that supports the Java Runtime Environment (JRE) version 1.3, including Windows, Mac OSX, Linux, Solaris, etc. A minimum of 64 MB of available RAM is needed, and the fully installed program requires 400 MB of disk space.

  14. Identification of earthquakes that generate tsunamis in Java and Nusa Tenggara using rupture duration analysis

    Energy Technology Data Exchange (ETDEWEB)

    Pribadi, S., E-mail: sugengpribadimsc@gmail.com [Tsunami Warning Information Division, Indonesian Meteorological Climatological and Geophysical Agency (BMKG), Jalan Angkasa I No. 2, Jakarta13920 and Graduate Student of Earth Sciences, Faculty of Earth Sciences and Technology, Bandung Institute of T (Indonesia); Puspito, N. T.; Yudistira, T.; Afnimar,; Ibrahim, G. [Global Geophysics Research Group, Faculty of Mining and Petroleum Engineering, Bandung Institute of Technology (ITB), Jalan Ganesha 10, Bandung 40132 (Indonesia); Laksono, B. I. [Database Maintenance Division, Indonesian Meteorological Climatological and Geophysical Agency (BMKG), Jalan Angkasa I No.2, Jakarta 13920 (Indonesia); Adnan, Z. [Database Maintenance Division, Indonesian Meteorological Climatological and Geophysical Agency (BMKG), Jalan Angkasa I No. 2, Jakarta 13920 and Graduate Student of Earth Sciences, Faculty of Earth Sciences and Technology, Bandung Institute of Technol (Indonesia)

    2014-09-25

    Java and Nusa Tenggara are the tectonically active of Sunda arc. This study discuss the rupture duration as a manifestation of the power of earthquake-generated tsunami. We use the teleseismic (30° - 90°) body waves with high-frequency energy Seismometer is from IRIS network as amount 206 broadband units. We applied the Butterworth high bandpass (1 - 2 Hz) filtered. The arrival and travel times started from wave phase of P - PP which based on Jeffrey Bullens table with TauP program. The results are that the June 2, 1994 Banyuwangi and the July 17, 2006 Pangandaran earthquakes identified as tsunami earthquakes with long rupture duration (To > 100 second), medium magnitude (7.6 < Mw < 7.9) and located near the trench. The others are 4 tsunamigenic earthquakes and 3 inland earthquakes with short rupture duration start from To > 50 second which depend on its magnitude. Those events are located far from the trench.

  15. Tsunami Evidence in South Coast Java, Case Study: Tsunami Deposit along South Coast of Cilacap

    Science.gov (United States)

    Rizal, Yan; Aswan; Zaim, Yahdi; Dwijo Santoso, Wahyu; Rochim, Nur; Daryono; Dewi Anugrah, Suci; Wijayanto; Gunawan, Indra; Yatimantoro, Tatok; Hidayanti; Herdiyani Rahayu, Resti; Priyobudi

    2017-06-01

    Cilacap Area is situated in coastal area of Southern Java and directly affected by tsunami hazard in 2006. This event was triggered by active subduction in Java Trench which active since long time ago. To detect tsunami and active tectonic in Southern Java, paleo-tsunami study is performed which is targeted paleo-tsunami deposit older than fifty years ago. During 2011 - 2016, 16 locations which suspected as paleo-tsunami location were visited and the test-pits were performed to obtain characteristic and stratigraphy of paleo-tsunami layers. Paleo-tsunami layer was identified by the presence of light-sand in the upper part of paleo-soil, liquefaction fine grain sandstone, and many rip-up clast of mudstone. The systematic samples were taken and analysis (micro-fauna, grainsize and dating analysis). Micro-fauna result shows that paleo-tsunami layer consist of benthonic foraminifera assemblages from different bathymetry and mixing in one layer. Moreover, grainsize shows random grain distribution which characterized as turbulence and strong wave deposit. Paleo-tsunami layers in Cilacap area are correlated using paleo-soil as marker. There are three paleo-tsunami layers and the distribution can be identified as PS-A, PS-B and PS-C. The samples which were taken in Glempang Pasir layer are being dated using Pb - Zn (Lead-Zinc) method. The result of Pb - Zn (Lead-Zinc) dating shows that PS-A was deposited in 139 years ago, PS-B in 21 years ago, and PS C in 10 years ago. This result indicates that PS -1 occurred in 1883 earthquake activity while PS B formed in 1982 earthquake and PS-C was formed by 2006 earthquake. For ongoing research, the older paleo-tsunami layers were determined in the Gua Nagaraja, close to Selok location and 6 layers of Paleo-tsunami suspect found which shown a similar characteristic with the layers from another location. The three layers deeper approximately have an older age than another location in Cilacap.

  16. Identification of earthquakes that generate tsunamis in Java and Nusa Tenggara using rupture duration analysis

    International Nuclear Information System (INIS)

    Pribadi, S.; Puspito, N. T.; Yudistira, T.; Afnimar,; Ibrahim, G.; Laksono, B. I.; Adnan, Z.

    2014-01-01

    Java and Nusa Tenggara are the tectonically active of Sunda arc. This study discuss the rupture duration as a manifestation of the power of earthquake-generated tsunami. We use the teleseismic (30° - 90°) body waves with high-frequency energy Seismometer is from IRIS network as amount 206 broadband units. We applied the Butterworth high bandpass (1 - 2 Hz) filtered. The arrival and travel times started from wave phase of P - PP which based on Jeffrey Bullens table with TauP program. The results are that the June 2, 1994 Banyuwangi and the July 17, 2006 Pangandaran earthquakes identified as tsunami earthquakes with long rupture duration (To > 100 second), medium magnitude (7.6 50 second which depend on its magnitude. Those events are located far from the trench

  17. Earthquake Early Warning Beta Users: Java, Modeling, and Mobile Apps

    Science.gov (United States)

    Strauss, J. A.; Vinci, M.; Steele, W. P.; Allen, R. M.; Hellweg, M.

    2014-12-01

    Earthquake Early Warning (EEW) is a system that can provide a few to tens of seconds warning prior to ground shaking at a user's location. The goal and purpose of such a system is to reduce, or minimize, the damage, costs, and casualties resulting from an earthquake. A demonstration earthquake early warning system (ShakeAlert) is undergoing testing in the United States by the UC Berkeley Seismological Laboratory, Caltech, ETH Zurich, University of Washington, the USGS, and beta users in California and the Pacific Northwest. The beta users receive earthquake information very rapidly in real-time and are providing feedback on their experiences of performance and potential uses within their organization. Beta user interactions allow the ShakeAlert team to discern: which alert delivery options are most effective, what changes would make the UserDisplay more useful in a pre-disaster situation, and most importantly, what actions users plan to take for various scenarios. Actions could include: personal safety approaches, such as drop cover, and hold on; automated processes and procedures, such as opening elevator or fire stations doors; or situational awareness. Users are beginning to determine which policy and technological changes may need to be enacted, and funding requirements to implement their automated controls. The use of models and mobile apps are beginning to augment the basic Java desktop applet. Modeling allows beta users to test their early warning responses against various scenarios without having to wait for a real event. Mobile apps are also changing the possible response landscape, providing other avenues for people to receive information. All of these combine to improve business continuity and resiliency.

  18. Scientists Engage South Carolina Community in Earthquake Education and Preparedness

    Science.gov (United States)

    Hall, C.; Beutel, E.; Jaume', S.; Levine, N.; Doyle, B.

    2008-12-01

    Scientists at the College of Charleston are working with the state of South Carolina's Emergency Management Division to increase awareness and understanding of earthquake hazards throughout South Carolina. As part of this mission, the SCEEP (South Carolina Earthquake Education and Preparedness) program was formed at the College of Charleston to promote earthquake research, outreach, and education in the state of South Carolina. Working with local, regional, state and federal offices, SCEEP has developed education programs for everyone from professional hazard management teams to formal and informal educators. SCEEP also works with the media to ensure accurate reporting of earthquake and other hazard information and to increase the public's understanding of earthquake science and earthquake seismology. As part of this program, we have developed a series of activities that can be checked out by educators for use in their classrooms and in informal education venues. These activities are designed to provide educators with the information and tools they lack to adequately, informatively, and enjoyably teach about earthquake and earth science. The toolkits contain seven activities meeting a variety of National Education Standards, not only in Science, but also in Geography, Math, Social Studies, Arts Education, History and Language Arts - providing a truly multidisciplinary toolkit for educators. The activities provide information on earthquake myths, seismic waves, elastic rebound, vectors, liquefaction, location of an epicenter, and then finally South Carolina earthquakes. The activities are engaging and inquiry based, implementing proven effective strategies for peaking learners' interest in scientific phenomena. All materials are provided within the toolkit and so it is truly check and go. While the SCEEP team has provided instructions and grade level suggestions for implementing the activity in an educational setting, the educator has full reign on what to showcase

  19. Seismic hazard analysis with PSHA method in four cities in Java

    International Nuclear Information System (INIS)

    Elistyawati, Y.; Palupi, I. R.; Suharsono

    2016-01-01

    In this study the tectonic earthquakes was observed through the peak ground acceleration through the PSHA method by dividing the area of the earthquake source. This study applied the earthquake data from 1965 - 2015 that has been analyzed the completeness of the data, location research was the entire Java with stressed in four large cities prone to earthquakes. The results were found to be a hazard map with a return period of 500 years, 2500 years return period, and the hazard curve were four major cities (Jakarta, Bandung, Yogyakarta, and the city of Banyuwangi). Results Java PGA hazard map 500 years had a peak ground acceleration within 0 g ≥ 0.5 g, while the return period of 2500 years had a value of 0 to ≥ 0.8 g. While, the PGA hazard curves on the city's most influential source of the earthquake was from sources such as fault Cimandiri backgroud, for the city of Bandung earthquake sources that influence the seismic source fault dent background form. In other side, the city of Yogyakarta earthquake hazard curve of the most influential was the source of the earthquake background of the Opak fault, and the most influential hazard curve of Banyuwangi earthquake was the source of Java and Sumba megatruts earthquake. (paper)

  20. Earthquake effect on volcano and the geological structure in central java using tomography travel time method and relocation hypocenter by grid search method

    International Nuclear Information System (INIS)

    Suharsono; Nurdian, S. W; Palupi, I. R.

    2016-01-01

    Relocating hypocenter is a way to improve the velocity model of the subsurface. One of the method is Grid Search. To perform the distribution of the velocity in subsurface by tomography method, it is used the result of relocating hypocenter to be a reference for subsurface analysis in volcanic and major structural patterns, such as in Central Java. The main data of this study is the earthquake data recorded from 1952 to 2012 with the P wave number is 9162, the number of events is 2426 were recorded by 30 stations located in the vicinity of Central Java. Grid search method has some advantages they are: it can relocate the hypocenter more accurate because this method is dividing space lattice model into blocks, and each grid block can only be occupied by one point hypocenter. Tomography technique is done by travel time data that has had relocated with inversion pseudo bending method. Grid search relocated method show that the hypocenter's depth is shallower than before and the direction is to the south, the hypocenter distribution is modeled into the subduction zone between the continent of Eurasia with the Indo-Australian with an average angle of 14 °. The tomography results show the low velocity value is contained under volcanoes with value of -8% to -10%, then the pattern of the main fault structure in Central Java can be description by the results of tomography at high velocity that is from 8% to 10% with the direction is northwest and northeast-southwest. (paper)

  1. Where was the 1898 Mare Island Earthquake? Insights from the 2014 South Napa Earthquake

    Science.gov (United States)

    Hough, S. E.

    2014-12-01

    The 2014 South Napa earthquake provides an opportunity to reconsider the Mare Island earthquake of 31 March 1898, which caused severe damage to buildings at a Navy yard on the island. Revising archival accounts of the 1898 earthquake, I estimate a lower intensity magnitude, 5.8, than the value in the current Uniform California Earthquake Rupture Forecast (UCERF) catalog (6.4). However, I note that intensity magnitude can differ from Mw by upwards of half a unit depending on stress drop, which for a historical earthquake is unknowable. In the aftermath of the 2014 earthquake, there has been speculation that apparently severe effects on Mare Island in 1898 were due to the vulnerability of local structures. No surface rupture has ever been identified from the 1898 event, which is commonly associated with the Hayward-Rodgers Creek fault system, some 10 km west of Mare Island (e.g., Parsons et al., 2003). Reconsideration of detailed archival accounts of the 1898 earthquake, together with a comparison of the intensity distributions for the two earthquakes, points to genuinely severe, likely near-field ground motions on Mare Island. The 2014 earthquake did cause significant damage to older brick buildings on Mare Island, but the level of damage does not match the severity of documented damage in 1898. The high intensity files for the two earthquakes are more over spatially shifted, with the centroid of the 2014 distribution near the town of Napa and that of the 1898 distribution near Mare Island, east of the Hayward-Rodgers Creek system. I conclude that the 1898 Mare Island earthquake was centered on or near Mare Island, possibly involving rupture of one or both strands of the Franklin fault, a low-slip-rate fault sub-parallel to the Rodgers Creek fault to the west and the West Napa fault to the east. I estimate Mw5.8 assuming an average stress drop; data are also consistent with Mw6.4 if stress drop was a factor of ≈3 lower than average for California earthquakes. I

  2. Earthquake occurrence along the Java trench in front of the onset of the Wadati-Benioff zone: Beginning of a new subduction cycle?

    Czech Academy of Sciences Publication Activity Database

    Špičák, Aleš; Hanuš, Václav; Vaněk, Jiří

    2007-01-01

    Roč. 26, č. 1 (2007), TC1005/1-TC1005/16 ISSN 0278-7407 R&D Projects: GA AV ČR IAA3012303 Institutional research plan: CEZ:AV0Z30120515 Keywords : Wadati-Benioff zone * earthquake occurrence * Java trench Subject RIV: DC - Siesmology, Volcanology, Earth Structure Impact factor: 2.398, year: 2007

  3. Is earthquake rate in south Iceland modified by seasonal loading?

    Science.gov (United States)

    Jonsson, S.; Aoki, Y.; Drouin, V.

    2017-12-01

    Several temporarily varying processes have the potential of modifying the rate of earthquakes in the south Iceland seismic zone, one of the two most active seismic zones in Iceland. These include solid earth tides, seasonal meteorological effects and influence from passing weather systems, and variations in snow and glacier loads. In this study we investigate the influence these processes may have on crustal stresses and stressing rates in the seismic zone and assess whether they appear to be influencing the earthquake rate. While historical earthquakes in the south Iceland have preferentially occurred in early summer, this tendency is less clear for small earthquakes. The local earthquake catalogue (going back to 1991, magnitude of completeness M6+ earthquakes, which occurred in June 2000 and May 2008. Standard Reasenberg earthquake declustering or more involved model independent stochastic declustering algorithms are not capable of fully eliminating the aftershocks from the catalogue. We therefore inspected the catalogue for the time period before 2000 and it shows limited seasonal tendency in earthquake occurrence. Our preliminary results show no clear correlation between earthquake rates and short-term stressing variations induced from solid earth tides or passing storms. Seasonal meteorological effects also appear to be too small to influence the earthquake activity. Snow and glacier load variations induce significant vertical motions in the area with peak loading occurring in Spring (April-May) and maximum unloading in Fall (Sept.-Oct.). Early summer occurrence of historical earthquakes therefore correlates with early unloading rather than with the peak unloading or unloading rate, which appears to indicate limited influence of this seasonal process on the earthquake activity.

  4. Earthquake disaster mitigation of Lembang Fault West Java with electromagnetic method

    International Nuclear Information System (INIS)

    Widodo

    2015-01-01

    The Lembang fault is located around eight kilometers from Bandung City, West Java, Indonesia. The existence of this fault runs through densely populated settlement and tourism area. It is an active fault structure with increasing seismic activity where the 28 August 2011 earthquake occurred. The seismic response at the site is strongly influenced by local geological conditions. The ambient noise measurements from the western part of this fault give strong implication for a complex 3-D tectonic setting. Hence, near surface Electromagnetic (EM) measurements are carried out to understand the location of the local active fault of the research area. Hence, near surface EM measurements are carried out to understand the location of the local active fault and the top of the basement structure of the research area. The Transientelectromagnetic (TEM) measurements are carried out along three profiles, which include 35 TEM soundings. The results indicate that TEM data give detailed conductivity distribution of fault structure in the study area

  5. Earthquake disaster mitigation of Lembang Fault West Java with electromagnetic method

    Energy Technology Data Exchange (ETDEWEB)

    Widodo, E-mail: widodo@gf.itb.ac.id [Geophysical Engineering, Bandung Institute of Technology, 40132, Bandung (Indonesia)

    2015-04-24

    The Lembang fault is located around eight kilometers from Bandung City, West Java, Indonesia. The existence of this fault runs through densely populated settlement and tourism area. It is an active fault structure with increasing seismic activity where the 28 August 2011 earthquake occurred. The seismic response at the site is strongly influenced by local geological conditions. The ambient noise measurements from the western part of this fault give strong implication for a complex 3-D tectonic setting. Hence, near surface Electromagnetic (EM) measurements are carried out to understand the location of the local active fault of the research area. Hence, near surface EM measurements are carried out to understand the location of the local active fault and the top of the basement structure of the research area. The Transientelectromagnetic (TEM) measurements are carried out along three profiles, which include 35 TEM soundings. The results indicate that TEM data give detailed conductivity distribution of fault structure in the study area.

  6. Seismicity of the Earth 1900-2012 Java and vicinity

    Science.gov (United States)

    Jones, Eric S.; Hayes, Gavin P.; Bernardino, Melissa; Dannemann, Fransiska K.; Furlong, Kevin P.; Benz, Harley M.; Villaseñor, Antonio

    2014-01-01

    Sumatra section, despite both areas being located along the same active subduction margin. Shallow (0–20 km) events have occurred historically in the overlying Sunda plate, causing damage to local and regional communities. A recent example was the May 26, 2006 M6.3 left-lateral strike-slip event that occurred at a depth of 10 km in central Java, and caused over 5,700 fatalities. Intermediate depth (70–300 km) earthquakes frequently occur beneath Java as a result of intraplate faulting within the Australia slab. Deep (300–650 km) earthquakes occur beneath the Java Sea and the back-arc region to the north of Java. Similar to other intermediate depth events, these earthquakes are also associated with intraslab faulting. However, this subduction zone exhibits a gap in seismicity from 250 to 400 km, interpreted as the transition between extensional and compressional slab stresses. Historical examples of large intraplate events include: the 1903 M8.1 event, 1921 M7.5 event, 1977 M8.3 event, and August 2007 M7.5 event. Large thrust earthquakes close to the Java trench are typically interplate faulting events along the slab interface between the Australia and Sunda plates. These earthquakes also generally have high tsunamigenic potential due to their shallow hypocentral depths. In some cases, these events have demonstrated slow moment-release and have been defined as ‘tsunami’ earthquakes, where rupture is large in the weak crustal layers very close to the seafloor. These events are categorized by tsunamis that are significantly larger than predicted by the earthquake’s magnitude. The most notable tsunami earthquakes in the Java region occurred on June 2, 1994 (M7.8) and July 17, 2006 (M7.7). The 1994 event produced a tsunami with wave runup heights of 13 m, killing over 200 people. The 2006 event produced a tsunami of up to 15 m, and killed 730 people. Although both of these tsunami earthquakes were characterized by rupture along thrust faults, they were followed by

  7. Attenuation relation for strong motion in Eastern Java based on appropriate database and method

    Science.gov (United States)

    Mahendra, Rian; Rohadi, Supriyanto; Rudyanto, Ariska

    2017-07-01

    The selection and determination of attenuation relation has become important for seismic hazard assessment in active seismic region. This research initially constructs the appropriate strong motion database, including site condition and type of the earthquake. The data set consisted of large number earthquakes of 5 ≤ Mw ≤ 9 and distance less than 500 km that occurred around Java from 2009 until 2016. The location and depth of earthquake are being relocated using double difference method to improve the quality of database. Strong motion data from twelve BMKG's accelerographs which are located in east Java is used. The site condition is known by using dominant period and Vs30. The type of earthquake is classified into crustal earthquake, interface, and intraslab based on slab geometry analysis. A total of 10 Ground Motion Prediction Equations (GMPEs) are tested using Likelihood (Scherbaum et al., 2004) and Euclidean Distance Ranking method (Kale and Akkar, 2012) with the associated database. The evaluation of these methods lead to a set of GMPEs that can be applied for seismic hazard in East Java where the strong motion data is collected. The result of these methods found that there is still high deviation of GMPEs, so the writer modified some GMPEs using inversion method. Validation was performed by analysing the attenuation curve of the selected GMPE and observation data in period 2015 up to 2016. The results show that the selected GMPE is suitable for estimated PGA value in East Java.

  8. Earthquake Warning Performance in Vallejo for the South Napa Earthquake

    Science.gov (United States)

    Wurman, G.; Price, M.

    2014-12-01

    In 2002 and 2003, Seismic Warning Systems, Inc. installed first-generation QuakeGuardTM earthquake warning devices at all eight fire stations in Vallejo, CA. These devices are designed to detect the P-wave of an earthquake and initiate predetermined protective actions if the impending shaking is estimated at approximately Modifed Mercalli Intensity V or greater. At the Vallejo fire stations the devices were set up to sound an audio alert over the public address system and to command the equipment bay doors to open. In August 2014, after more than 11 years of operating in the fire stations with no false alarms, the five units that were still in use triggered correctly on the MW 6.0 South Napa earthquake, less than 16 km away. The audio alert sounded in all five stations, providing fire fighters with 1.5 to 2.5 seconds of warning before the arrival of the S-wave, and the equipment bay doors opened in three of the stations. In one station the doors were disconnected from the QuakeGuard device, and another station lost power before the doors opened completely. These problems highlight just a small portion of the complexity associated with realizing actionable earthquake warnings. The issues experienced in this earthquake have already been addressed in subsequent QuakeGuard product generations, with downstream connection monitoring and backup power for critical systems. The fact that the fire fighters in Vallejo were afforded even two seconds of warning at these epicentral distances results from the design of the QuakeGuard devices, which focuses on rapid false positive rejection and ground motion estimates. We discuss the performance of the ground motion estimation algorithms, with an emphasis on the accuracy and timeliness of the estimates at close epicentral distances.

  9. Far-Field Effects of Large Earthquakes on South Florida's Confined Aquifer

    Science.gov (United States)

    Voss, N. K.; Wdowinski, S.

    2012-12-01

    The similarity between a seismometer and a well hydraulic head record during the passage of a seismic wave has long been documented. This is true even at large distances from earthquake epicenters. South Florida lacks a dense seismic array but does contain a comparably dense network of monitoring wells. The large spatial distribution of deep monitoring wells in South Florida provides an opportunity to study the variance of aquifer response to the passage of seismic waves. We conducted a preliminary study of hydraulic head data, provided by the South Florida Water Management District, from 9 deep wells in South Florida's confined Floridian Aquifer in response to 27 main shock events (January 2010- April 2012) with magnitude 6.9 or greater. Coseismic hydraulic head response was observed in 7 of the 27 events. In order to determine what governs aquifer response to seismic events, earthquake parameters were compared for the 7 positive events. Seismic energy density (SED), an empirical relationship between distance and magnitude, was also used to compare the relative energy between the events at each well site. SED is commonly used as a parameter for establishing thresholds for hydrologic events in the near and intermediate fields. Our analysis yielded a threshold SED for well response in South Florida as 8 x 10-3 J m-3, which is consistent with other studies. Deep earthquakes, with SED above this threshold, did not appear to trigger hydraulic head oscillations. The amplitude of hydraulic head oscillations had no discernable relationship to SED levels. Preliminary results indicate a need for a modification of the SED equation to better accommodate depth in order to be of use in the study of hydrologic response in the far field. We plan to conduct a more comprehensive study incorporating a larger subset (~60) of wells in South Florida in order to further examine the spatial variance of aquifers to the passing of seismic waves as well as better confine the relationship

  10. Relaxation of the south flank after the 7.2-magnitude Kalapana earthquake, Kilauea Volcano, Hawaii

    Science.gov (United States)

    Dvorak, John J.; Klein, Fred W.; Swanson, Donald A.

    1994-01-01

    An M = 7.2 earthquake on 29 November 1975 caused the south flank of Kilauea Volcano, Hawaii, to move seaward several meters: a catastrophic release of compression of the south flank caused by earlier injections of magma into the adjacent segment of a rift zone. The focal mechanisms of the mainshock, the largest foreshock, and the largest aftershock suggest seaward movement of the upper block. The rate of aftershocks decreased in a familiar hyperbolic decay, reaching the pre-1975 rate of seismicity by the mid-1980s. Repeated rift-zone intrusions and eruptions after 1975, which occurred within 25 km of the summit area, compressed the adjacent portion of the south flank, apparently masking continued seaward displacement of the south flank. This is evident along a trilateration line that continued to extend, suggesting seaward displacement, immediately after the M = 7.2 earthquake, but then was compressed during a series of intrusions and eruptions that began in September 1977. Farther to the east, trilateration measurements show that the portion of the south flank above the aftershock zone, but beyond the area of compression caused by the rift-zone intrusions and eruptions, continued to move seaward at a decreasing rate until the mid-1980s, mimicking the decay in aftershock rate. Along the same portion of the south flank, the pattern of vertical surface displacements can be explained by continued seaward movement of the south flank and development of two eruptive fissures along the east rift zone, each of which extended from a depth of ∼3 km to the surface. The aftershock rate and continued seaward movement of the south flank are reminiscent of crustal response to other large earthquakes, such as the 1966 M = 6 Parkfield earthquake and the 1983 M = 6.5 Coalinga earthquake.

  11. Wedge geometry, frictional properties and interseismic coupling of the Java megathrust

    Science.gov (United States)

    Koulali, Achraf; McClusky, Simon; Cummins, Phil; Tregoning, Paul

    2018-06-01

    The mechanical interaction between rocks at fault zones is a key element for understanding how earthquakes nucleate and propagate. Therefore, estimating frictional properties along fault planes allows us to infer the degree of elastic strain accumulation throughout the seismic cycle. The Java subduction zone is an active plate boundary where high seismic activity has long been documented. However, very little is known about the seismogenic processes of the megathrust, especially its shallowest portion where onshore geodetic networks are insensitive to recover the pattern of elastic strain. Here, we use the geometry of the offshore accretionary prism to infer frictional properties along the Java subduction zone, using Coulomb critical taper theory. We show that large portions of the inner wedge in the eastern part of the Java subduction megathrust are in a critical state, where the wedge is on the verge of failure everywhere. We identify four clusters with an internal coefficient of friction μint of ∼ 0.8 and hydrostatic pore pressure within the wedge. The average effective coefficient of friction ranges between 0.3 and 0.4, reflecting a strong décollement. Our results also show that the aftershock sequence of the 1994 Mw 7.9 earthquake halted adjacent to a critical segment of the wedge, suggesting that critical taper wedge areas in the eastern Java subduction interface may behave as a permanent barrier to large earthquake rupture. In contrast, in western Java topographic slope and slab dip profiles suggest that the wedge is mechanically stable, i.e deformation is restricted to sliding along the décollement, and likely to coincide with a seismogenic portion of the megathrust. We discuss the seismic hazard implications and highlight the importance of considering the segmentation of the Java subduction zone when assessing the seismic hazard of this region.

  12. Seismo-Lineament Analysis Method (SLAM) Applied to the South Napa Earthquake

    Science.gov (United States)

    Worrell, V. E.; Cronin, V. S.

    2014-12-01

    We used the seismo-lineament analysis method (SLAM; http://bearspace.baylor.edu/Vince_Cronin/www/SLAM/) to "predict" the location of the fault that produced the M 6.0 South Napa earthquake of 24 August 2014, using hypocenter and focal mechanism data from NCEDC (http://www.ncedc.org/ncedc/catalog-search.html) and a digital elevation model from the USGS National Elevation Dataset (http://viewer.nationalmap.gov/viewer/). The ground-surface trace of the causative fault (i.e., the Browns Valley strand of the West Napa fault zone; Bryant, 2000, 1982) and virtually all of the ground-rupture sites reported by the USGS and California Geological Survey (http://www.eqclearinghouse.org/2014-08-24-south-napa/) were located within the north-striking seismo-lineament. We also used moment tensors published online by the USGS and GCMT (http://comcat.cr.usgs.gov/earthquakes/eventpage/nc72282711#scientific_moment-tensor) as inputs to SLAM and found that their northwest-striking seismo-lineaments correlated spatially with the causative fault. We concluded that SLAM could have been used as soon as these mechanism solutions were available to help direct the search for the trace of the causative fault and possible rupture-related damage. We then considered whether the seismogenic fault could have been identified using SLAM prior to the 24 August event, based on the focal mechanisms of smaller prior earthquakes reported by the NCEDC or ISC (http://www.isc.ac.uk). Seismo-lineaments from three M~3.5 events from 1990 and 2012, located in the Vallejo-Crockett area, correlate spatially with the Napa County Airport strand of the West Napa fault and extend along strike toward the Browns Valley strand (Bryant, 2000, 1982). Hence, we might have used focal mechanisms from smaller earthquakes to establish that the West Napa fault is likely seismogenic prior to the South Napa earthquake. Early recognition that a fault with a mapped ground-surface trace is seismogenic, based on smaller earthquakes

  13. Seismicity and stress state in the South China Sea, Indochina and their vicinity

    Science.gov (United States)

    Zang, Shaoxian; Wu, Zhongliang; Li, Aibing

    1992-02-01

    The distribution of earthquakes from 1973 to 1982 in the South China Sea, Indochina and their vicinity was studied using the data from I. S. C. It was found that the earthquakes are mainly concentrated along the boundaries of plates. Beside, some of shallow eartqhuakes are distributed in west part of Burma and the boundary between Burma and China, a few of earthquakes occurred in South China Sea. The features of Benioff zone along the boundaries between India plate, Philippine Sea plate and Eurasia plate were studied. The plate do not coupled well under the Java trench and the Philippine trench. The subducted India plate under Burmese range, Andaman—Nicobar arc moves NNE. The fault plane solutions of earthquakes were studied using the first motions of P wave. The stress state on subduction zones and within the area were deduced from the fault plane solutions and the fault movement. It was found that the direction of principal compression axis of stress is in the NNE in west part of Burma, in S—N in south and middle part of Bruma and Thailand, and in NNE or S—N in the South China Sea. It was also found that the stress state has close relation with the interaction of plates.

  14. GPS-determined Crustal Deformation of South Korea after the 2011 Tohoku-Oki Earthquake: Straining Heterogeneity and Seismicity

    Science.gov (United States)

    Ree, J. H.; Kim, S.; Yoon, H. S.; Choi, B. K.; Park, P. H.

    2017-12-01

    The GPS-determined, pre-, co- and post-seismic crustal deformations of the Korean peninsula with respect to the 2011 Tohoku-Oki earthquake (Baek et al., 2012, Terra Nova; Kim et al., 2015, KSCE Jour. of Civil Engineering) are all stretching ones (extensional; horizontal stretching rate larger than horizontal shortening rate). However, focal mechanism solutions of earthquakes indicate that South Korea has been at compressional regime dominated by strike- and reverse-slip faultings. We reevaluated the velocity field of GPS data to see any effect of the Tohoku-Oki earthquake on the Korean crustal deformation and seismicity. To calculate the velocity gradient tensor of GPS sites, we used a gridding method based on least-square collocation (LSC). This LSC method can overcome shortcomings of the segmentation methods including the triangulation method. For example, an undesirable, abrupt change in components of velocity field occurs at segment boundaries in the segmentation methods. It is also known that LSC method is more useful in evaluating deformation patterns in intraplate areas with relatively small displacements. Velocity vectors of South Korea, pointing in general to 113° before the Tohoku-Oki earthquake, instantly changed their direction toward the epicenter (82° on average) during the Tohoku-Oki earthquake, and then gradually returned to the original position about 2 years after the Tohoku-Oki earthquake. Our calculation of velocity gradient tensors after the Tohoku-Oki earthquake shows that the stretching and rotating fields are quite heterogeneous, and that both stretching and shortening areas exist in South Korea. In particular, after the post-seismic relaxation ceased (i.e., from two years after the Tohoku-Oki earthquake), regions with thicker and thinner crusts tend to be shortening and stretching, respectively, in South Korea. Furthermore, the straining rate is larger in the regions with thinner crust. Although there is no meaningful correlation between

  15. Tsunami Disaster Risk Assessment and Prevention in West Java, Indonesia

    Science.gov (United States)

    Deng, H.; Harris, R. A.; Horns, D. M.; Yulianto, E.; Bunds, M. P.; Prasetyadi, C.; Emmett, C.; Hall, S.

    2016-12-01

    Java Island, Indonesia is the most populated area and one of the most tectonically active coastal nations on Earth. This island is the volcanic arc and accretionary wedge of the subduction zone of the Sunda and the Australia plate, where the Java Trench is located. However, the Java Trench hasn't had a mega or giant earthquake for at least 430 years according to historical records. Up to 30 m of slip may have accumulated on the subduction zone interface during this time, which is enough to produce a Mw 9.0 earthquake and large tsunami. One of the largest seismic gaps along the Sunda Arc is a 640 km section of the coast of west Java. The largest population center in this region is Pelabuhan Ratu, with is partially built on ridge and swale coastal plain topography. Candidate tsunami deposits were found in swales that may indicate inundation up to 1 km inland. Numerical modeling of various possible tsunami scenarios indicate that the configuration of the coastline may amplify a tsunami and cause high run-up in the most populated areas or the coast. Also, data from questionnaire surveys administered in Pelabuhan Ratu show a lack of awareness about how tsunamis threaten these communities and plans of action.

  16. Stress Drops of Earthquakes on the Subducting Pacific Plate in the South-East off Hokkaido, Japan

    Science.gov (United States)

    Saito, Y.; Yamada, T.

    2013-12-01

    Large earthquakes have been occurring repeatedly in the South-East of Hokkaido, Japan, where the Pacific Plate subducts beneath the Okhotsk Plate in the north-west direction. For example, the 2003 Tokachi-oki earthquake (Mw8.3 determined by USGS) took place in the region on September 26, 2003. Yamanaka and Kikuchi (2003) analyzed the slip distribution of the earthquake and concluded that the 2003 earthquake had ruptured the deeper half of the fault plane of the 1952 Tokachi-oki earthquake. Miyazaki et al. (2004) reported that a notable afterslip was observed at adjacent areas to the coseismic rupture zone of the 2003 earthquake, which suggests that there would be significant heterogeneities of strength, stress and frictional properties on the surface of the Pacific Plate in the region. In addition, some previous studies suggest that the region with a large slip in large earthquakes permanently have large difference of strength and the dynamic frictional stress level and that it would be able to predict the spatial pattern of slip in the next large earthquake by analyzing the stress drop of small earthquakes (e.g. Allmann and Shearer, 2007 and Yamada et al., 2010). We estimated stress drops of 150 earthquakes (4.2 ≤ M ≤ 5.0), using S-coda waves, or the waveforms from 4.00 to 9.11 seconds after the S wave arrivals, of Hi-net data. The 150 earthquakes were the ones that occurred from June, 2002 to December, 2010 in south-east of Hokkaido, Japan, from 40.5N to 43.5N and from 141.0E to 146.5E. First we selected waveforms of the closest earthquakes with magnitudes between 3.0 and 3.2 to individual 150 earthquakes as empirical Green's functions. We then calculated source spectral ratios of the 150 pairs of interested earthquakes and EGFs by deconvolving the individual S-coda waves. We finally estimated corner frequencies of earthquakes from the spectral ratios by assuming the omega-squared model of Boatwright (1978) and calculated stress drops of the earthquakes by

  17. Recent research in earth structure, earthquake and mine seismology, and seismic hazard evaluation in South Africa

    CSIR Research Space (South Africa)

    Wright, C

    2003-07-01

    Full Text Available of earthquakes, earthquake hazard and earth structure in South Africa was prepared for the centennial handbook of the Interna- tional Association of Seismology and the Physics of the Earth?s Interior(IASPEI).3 Referencestothesescompletedinthelastfour...

  18. Introduction: seismology and earthquake engineering in Central and South America.

    Science.gov (United States)

    Espinosa, A.F.

    1983-01-01

    Reports the state-of-the-art in seismology and earthquake engineering that is being advanced in Central and South America. Provides basic information on seismological station locations in Latin America and some of the programmes in strong-motion seismology, as well as some of the organizations involved in these activities.-from Author

  19. Memory effect in M ≥ 6 earthquakes of South-North Seismic Belt, Mainland China

    Science.gov (United States)

    Wang, Jeen-Hwa

    2013-07-01

    The M ≥ 6 earthquakes occurred in the South-North Seismic Belt, Mainland China, during 1901-2008 are taken to study the possible existence of memory effect in large earthquakes. The fluctuation analysis technique is applied to analyze the sequences of earthquake magnitude and inter-event time represented in the natural time domain. Calculated results show that the exponents of scaling law of fluctuation versus window length are less than 0.5 for the sequences of earthquake magnitude and inter-event time. The migration of earthquakes in study is taken to discuss the possible correlation between events. The phase portraits of two sequent magnitudes and two sequent inter-event times are also applied to explore if large (or small) earthquakes are followed by large (or small) events. Together with all kinds of given information, we conclude that the earthquakes in study is short-term correlated and thus the short-term memory effect would be operative.

  20. Development of earthquake early warning system using real time signal of broadband seismogram

    International Nuclear Information System (INIS)

    Gunawan, Hendar; Puspito, Nanang T.; Ibrahim, Gunawan; Harjadi, Prih

    2012-01-01

    Earthquake pose serious threat of live and properties for urban area near subduction zone offshore and active fault on land. Jakarta and Bandung is an example of big city that no system of Earthquake early warning (EEW) event very high urbanization, and has many important infra structure in the area. The capital city is potentially high risk ground shaking. EEW can be usefull tool for reducing earthquake hazard, if spatial relation between cities and earthquake source is favorable for such warning and their citizens are properly trained to response early warning message. An EEW and rapid response system can provide the critical information needed to minimized lost of live and property and direct rescue. Earthquake ground shaking with magnitude M>6.0 from zone of Megathrust, southern of West Java should potentially damage in the area of west java especially Bandung and Jakarta City. This research development of EEW parameter such as amplitude displacement (Pd), rapid magnitude determination (M) and Peak ground Velocity (PGV). We explore the practical approach to EEW with the use of Broadband seismogram signal. Time effective EEW which epicenter from megathrust zone has potential to provide EEW in the area of west java such as Jakarta first ground shaking more or less 60 second later and strong shaking 118 second after EEW Alarm on CISI Station. EEW notification at potentially damage in the area of west java can be predicted from the characteristic of Pd > 0.5 cm, M> 6 and PGV > 10 cm/sec. GIS as a tool for presentation of hazard mapping in the affected area.

  1. Assessment of flexural analysis applied to the Sumatra–Java ...

    Indian Academy of Sciences (India)

    Indian Ocean subduction zone is one of the most active plate margins of the globe as evident from its vast record of great magnitude earthquake and tsunami events.We use Bouguer admittance (Morlet isostatic response function)in Sumatra –Java subduction zones comprising both the subduction and over-riding plates to ...

  2. Tsunami Hazard Assessment of Coastal South Africa Based on Mega-Earthquakes of Remote Subduction Zones

    Science.gov (United States)

    Kijko, Andrzej; Smit, Ansie; Papadopoulos, Gerassimos A.; Novikova, Tatyana

    2017-11-01

    After the mega-earthquakes and concomitant devastating tsunamis in Sumatra (2004) and Japan (2011), we launched an investigation into the potential risk of tsunami hazard to the coastal cities of South Africa. This paper presents the analysis of the seismic hazard of seismogenic sources that could potentially generate tsunamis, as well as the analysis of the tsunami hazard to coastal areas of South Africa. The subduction zones of Makran, South Sandwich Island, Sumatra, and the Andaman Islands were identified as possible sources of mega-earthquakes and tsunamis that could affect the African coast. Numerical tsunami simulations were used to investigate the realistic and worst-case scenarios that could be generated by these subduction zones. The simulated tsunami amplitudes and run-up heights calculated for the coastal cities of Cape Town, Durban, and Port Elizabeth are relatively small and therefore pose no real risk to the South African coast. However, only distant tsunamigenic sources were considered and the results should therefore be viewed as preliminary.

  3. Tsunami Hazard Assessment of Coastal South Africa Based on Mega-Earthquakes of Remote Subduction Zones

    Science.gov (United States)

    Kijko, Andrzej; Smit, Ansie; Papadopoulos, Gerassimos A.; Novikova, Tatyana

    2018-04-01

    After the mega-earthquakes and concomitant devastating tsunamis in Sumatra (2004) and Japan (2011), we launched an investigation into the potential risk of tsunami hazard to the coastal cities of South Africa. This paper presents the analysis of the seismic hazard of seismogenic sources that could potentially generate tsunamis, as well as the analysis of the tsunami hazard to coastal areas of South Africa. The subduction zones of Makran, South Sandwich Island, Sumatra, and the Andaman Islands were identified as possible sources of mega-earthquakes and tsunamis that could affect the African coast. Numerical tsunami simulations were used to investigate the realistic and worst-case scenarios that could be generated by these subduction zones. The simulated tsunami amplitudes and run-up heights calculated for the coastal cities of Cape Town, Durban, and Port Elizabeth are relatively small and therefore pose no real risk to the South African coast. However, only distant tsunamigenic sources were considered and the results should therefore be viewed as preliminary.

  4. Strain Anomalies during an Earthquake Sequence in the South Iceland Seismic Zone

    Science.gov (United States)

    Arnadottir, T.; Haines, A. J.; Geirsson, H.; Hreinsdottir, S.

    2017-12-01

    The South Iceland Seismic Zone (SISZ) accommodates E-W translation due to oblique spreading between the North American/Hreppar microplate and Eurasian plate, in South Iceland. Strain is released in the SISZ during earthquake sequences that last days to years, at average intervals of 80-100 years. The SISZ is currently in the midst of an earthquake sequence that started with two M6.5 earthquakes in June 2000, and continued with two M6 earthquakes in May 2008. Estimates of geometric strain accumulation, and seismic strain release in these events indicate that they released at most only half of the strain accumulated since the last earthquake cycle in 1896-1912. Annual GPS campaigns and continuous measurements during 2001-2015 were used to calculate station velocities and strain rates from a new method using the vertical derivatives of horizontal stress (VDoHS). This new method allows higher resolution of strain rates than other (older) approaches, as the strain rates are estimated by integrating VDoHS rates obtained by inversion rather than differentiating interpolated GPS velocities. Estimating the strain rates for eight 1-2 year intervals indicates temporal and spatial variation of strain rates in the SISZ. In addition to earthquake faulting, the strain rates in the SISZ are influenced by anthropogenic signals due to geothermal exploitation, and magma movements in neighboring volcanoes - Hekla and Eyjafjallajökull. Subtle signals of post-seismic strain rate changes are seen following the June 2000 M6.5 main shocks, but interestingly, much larger strain rate variations are observed after the two May 2008 M6 main shocks. A prominent strain anomaly is evident in the epicentral area prior to the May 2008 earthquake sequence. The strain signal persists over at least 4 years in the epicentral area, leading up to the M6 main shocks. The strain is primarily extension in ESE-WNW direction (sub-parallel to the direction of plate spreading), but overall shear across the N

  5. Characterization of tsunamigenic earthquake in Java region based on seismic wave calculation

    Energy Technology Data Exchange (ETDEWEB)

    Pribadi, Sugeng, E-mail: sugengpribadimsc@gmail.com [Badan Meteorologi Klimatologi Geofisika, Jl Angkasa I No. 2 Jakarta (Indonesia); Afnimar,; Puspito, Nanang T.; Ibrahim, Gunawan [Institut Teknologi Bandung, Jl. Ganesha 10, Bandung 40132 (Indonesia)

    2014-03-24

    This study is to characterize the source mechanism of tsunamigenic earthquake based on seismic wave calculation. The source parameter used are the ratio (Θ) between the radiated seismic energy (E) and seismic moment (M{sub o}), moment magnitude (M{sub W}), rupture duration (T{sub o}) and focal mechanism. These determine the types of tsunamigenic earthquake and tsunami earthquake. We calculate the formula using the teleseismic wave signal processing with the initial phase of P wave with bandpass filter 0.001 Hz to 5 Hz. The amount of station is 84 broadband seismometer with far distance of 30° to 90°. The 2 June 1994 Banyuwangi earthquake with M{sub W}=7.8 and the 17 July 2006 Pangandaran earthquake with M{sub W}=7.7 include the criteria as a tsunami earthquake which distributed about ratio Θ=−6.1, long rupture duration To>100 s and high tsunami H>7 m. The 2 September 2009 Tasikmalaya earthquake with M{sub W}=7.2, Θ=−5.1 and To=27 s which characterized as a small tsunamigenic earthquake.

  6. Characterization of tsunamigenic earthquake in Java region based on seismic wave calculation

    International Nuclear Information System (INIS)

    Pribadi, Sugeng; Afnimar,; Puspito, Nanang T.; Ibrahim, Gunawan

    2014-01-01

    This study is to characterize the source mechanism of tsunamigenic earthquake based on seismic wave calculation. The source parameter used are the ratio (Θ) between the radiated seismic energy (E) and seismic moment (M o ), moment magnitude (M W ), rupture duration (T o ) and focal mechanism. These determine the types of tsunamigenic earthquake and tsunami earthquake. We calculate the formula using the teleseismic wave signal processing with the initial phase of P wave with bandpass filter 0.001 Hz to 5 Hz. The amount of station is 84 broadband seismometer with far distance of 30° to 90°. The 2 June 1994 Banyuwangi earthquake with M W =7.8 and the 17 July 2006 Pangandaran earthquake with M W =7.7 include the criteria as a tsunami earthquake which distributed about ratio Θ=−6.1, long rupture duration To>100 s and high tsunami H>7 m. The 2 September 2009 Tasikmalaya earthquake with M W =7.2, Θ=−5.1 and To=27 s which characterized as a small tsunamigenic earthquake

  7. The ordered network structure of M {>=} 6 strong earthquakes and its prediction in the Jiangsu-South Yellow Sea region

    Energy Technology Data Exchange (ETDEWEB)

    Men, Ke-Pei [Nanjing Univ. of Information Science and Technology (China). College of Mathematics and Statistics; Cui, Lei [California Univ., Santa Barbara, CA (United States). Applied Probability and Statistics Dept.

    2013-05-15

    The the Jiangsu-South Yellow Sea region is one of the key seismic monitoring defence areas in the eastern part of China. Since 1846, M {>=} 6 strong earthquakes have showed an obvious commensurability and orderliness in this region. The main orderly values are 74 {proportional_to} 75 a, 57 {proportional_to} 58 a, 11 {proportional_to} 12 a, and 5 {proportional_to} 6 a, wherein 74 {proportional_to} 75 a and 57 {proportional_to} 58 a with an outstanding predictive role. According to the information prediction theory of Wen-Bo Weng, we conceived the M {>=} 6 strong earthquake ordered network structure in the South Yellow Sea and the whole region. Based on this, we analyzed and discussed the variation of seismicity in detail and also made a trend prediction of M {>=} 6 strong earthquakes in the future. The results showed that since 1998 it has entered into a new quiet episode which may continue until about 2042; and the first M {>=} 6 strong earthquake in the next active episode will probably occur in 2053 pre and post, with the location likely in the sea area of the South Yellow Sea; also, the second and the third ones or strong earthquake swarm in the future will probably occur in 2058 and 2070 pre and post. (orig.)

  8. New streams and springs after the 2014 Mw6.0 South Napa earthquake.

    Science.gov (United States)

    Wang, Chi-Yuen; Manga, Michael

    2015-07-09

    Many streams and springs, which were dry or nearly dry before the 2014 Mw6.0 South Napa earthquake, started to flow after the earthquake. A United States Geological Survey stream gauge also registered a coseismic increase in discharge. Public interest was heightened by a state of extreme drought in California. Since the new flows were not contaminated by pre-existing surface water, their composition allowed unambiguous identification of their origin. Following the earthquake we repeatedly surveyed the new flows, collecting data to test hypotheses about their origin. We show that the new flows originated from groundwater in nearby mountains released by the earthquake. The estimated total amount of new water is ∼ 10(6) m(3), about 1/40 of the annual water use in the Napa-Sonoma area. Our model also makes a testable prediction of a post-seismic decrease of seismic velocity in the shallow crust of the affected region.

  9. Shear wave velocity model beneath CBJI station West Java, Indonesia from joint inversion of teleseismic receiver functions and surface wave dispersion

    Science.gov (United States)

    Simanungkalit, R. H.; Anggono, T.; Syuhada; Amran, A.; Supriyanto

    2018-03-01

    Earthquake signal observations around the world allow seismologists to obtain the information of internal structure of the Earth especially the Earth’s crust. In this study, we used joint inversion of receiver functions and surface wave group velocities to investigate crustal structure beneath CBJI station in West Java, Indonesia. Receiver function were calculated from earthquakes with magnitude more than 5 and at distance 30°-90°. Surface wave group velocities were calculated using frequency time analysis from earthquakes at distance of 30°- 40°. We inverted shear wave velocity model beneath the station by conducting joint inversion from receiver functions and surface wave dispersions. We suggest that the crustal thickness beneath CBJI station, West Java, Indonesia is about 35 km.

  10. Radiated Seismic Energy of Earthquakes in the South-Central Region of the Gulf of California, Mexico

    Science.gov (United States)

    Castro, Raúl R.; Mendoza-Camberos, Antonio; Pérez-Vertti, Arturo

    2018-05-01

    We estimated the radiated seismic energy (ES) of 65 earthquakes located in the south-central region of the Gulf of California. Most of these events occurred along active transform faults that define the Pacific-North America plate boundary and have magnitudes between M3.3 and M5.9. We corrected the spectral records for attenuation using nonparametric S-wave attenuation functions determined with the whole data set. The path effects were isolated from the seismic source using a spectral inversion. We computed radiated seismic energy of the earthquakes by integrating the square velocity source spectrum and estimated their apparent stresses. We found that most events have apparent stress between 3 × 10-4 and 3 MPa. Model independent estimates of the ratio between seismic energy and moment (ES/M0) indicates that this ratio is independent of earthquake size. We conclude that in general the apparent stress is low (σa < 3 MPa) in the south-central and southern Gulf of California.

  11. Determination Hypocentre and Focal Mechanism Earthquake of Oct 31, 2016 in Bone, South Sulawesi

    Science.gov (United States)

    Altin Massinai, Muhammad; Fawzy Ismullah M, Muhammad

    2018-03-01

    Indonesian Meteorology, Climatology and Geophysics Agency (BMKG) recorded an earthquake with M4.6 on at October 31, 2016 at Bone District, around 80 Km northeast form Makassar, South Sulawesi. The earthquake occurred 18:18:14 local time in 4.7°S, 120°E with depth 10 Km. Seismicity around location predicted caused by activity Walennae fault. We reprocessed earthquake data to determine precise hypocentre location and focal mechanism. The P- and S-wave arrival time got from BMKG used as input HYPOELLIPSE code to determine hypocentre. The results showed that the earthquake occurred 10:18:14.46 UTC in 4.638°S, 119.966°E with depth 24.76 Km. The hypocentre resolved 10 Km fix depth and had lower travel time residual than BMKG result. Focal mechanism determination used Azmtak code based on the first arrival polarity at earthquake waveform manually picked. The result showed a reverse mechanism with strike direction 38°, dip 44°, rake angle 134° on fault plane I and strike direction 164°, dip 60°, rake angle 56° on fault plane II. So, the earthquake which may be related to a reverse East Walennae Fault.

  12. Quantifying the humanitarian and economic impact of earthquakes on South American capital cities (Invited)

    Science.gov (United States)

    Zoback, M. L.; Cabrera, C.; Pomonis, A.; Baca, A.; Brunner, I.; Cheung, G.; Chen, A.; Nagel, B.; Carrasco, S.

    2009-12-01

    By 2000, an estimated 80% of South America’s population lived in urban areas (Veblen et al., The Physical Geography of South America, Oxford University Press, 2007). A significant fraction of those urban dwellers resides in the capital cities which are major economic centers and act as magnets for rural poor and refugees. This population concentration includes many residents living in extreme poverty in substandard and informal housing, often on the margins of these capital cities and sometimes on steep slopes, greatly compounding the vulnerability to natural hazards. We are analyzing the humanitarian and economic risk for six of the seismically most-at-risk South American capitals along the northern and western plate boundaries of South America: Caracas, Venezuela; Bogotá, Colombia; Quito, Ecuador; Lima, Perú; La Paz, Bolivia; and Santiago, Chile. Impacts are provided in the form of expected losses for a specific “likely” scenario earthquake and in a probabilistic format using exceedance probability curves (probability of exceeding a given loss in different return periods). Impacts to be quantified include: total economic losses, potential fatalities, potential serious injuries, and the number of displaced households. Probabilistic seismic hazard was developed in collaboration with numerous South American experts and includes subduction interface, intraslab, background crustal and, where available, active fault sources. A significant challenge for this study is to accurately account for the exposure and vulnerability of populations living in the informal, shanty areas. Combining analysis of aerial imagery and on-the-ground reconnaissance, we define between 20-30 “inventory districts” of relatively uniform construction styles within each capital. Statistical distributions of the different construction types and their characteristics (height, occupancy, year built, average value) are estimated for each district. In addition, working with local graduate

  13. GIS learning tool for world's largest earthquakes and their causes

    Science.gov (United States)

    Chatterjee, Moumita

    The objective of this thesis is to increase awareness about earthquakes among people, especially young students by showing the five largest and two most predictable earthquake locations in the world and their plate tectonic settings. This is a geographic based interactive tool which could be used for learning about the cause of great earthquakes in the past and the safest places on the earth in order to avoid direct effect of earthquakes. This approach provides an effective way of learning for the students as it is very user friendly and more aligned to the interests of the younger generation. In this tool the user can click on the various points located on the world map which will open a picture and link to the webpage for that point, showing detailed information of the earthquake history of that place including magnitude of quake, year of past quakes and the plate tectonic settings that made this place earthquake prone. Apart from knowing the earthquake related information students will also be able to customize the tool to suit their needs or interests. Students will be able to add/remove layers, measure distance between any two points on the map, select any place on the map and know more information for that place, create a layer from this set to do a detail analysis, run a query, change display settings, etc. At the end of this tool the user has to go through the earthquake safely guidelines in order to be safe during an earthquake. This tool uses Java as programming language and uses Map Objects Java Edition (MOJO) provided by ESRI. This tool is developed for educational purpose and hence its interface has been kept simple and easy to use so that students can gain maximum knowledge through it instead of having a hard time to install it. There are lots of details to explore which can help more about what a GIS based tool is capable of. Only thing needed to run this tool is latest JAVA edition installed in their machine. This approach makes study more fun and

  14. Earthquakes, September-October 1986

    Science.gov (United States)

    Person, W.J.

    1987-01-01

    There was one great earthquake (8.0 and above) during this reporting period in the South Pacific in the Kermadec Islands. There were no major earthquakes (7.0-7.9) but earthquake-related deaths were reported in Greece and in El Salvador. There were no destrcutive earthquakes in the United States.

  15. Outline of geophysical investigations on the great earthquake in the south-west Japan on Dec. 21, 1946

    Science.gov (United States)

    Nagata, Takeshi

    1947-01-01

    In in the early morning of Dec. 21, 1946, a great destructive earthquake occurred in southern-western Japan. According to the seismogram obtained in our university, the earthquake motion began at Tokyo from 4 h 20 m 10.4 s on Dec. 21, 1946. The maximum amplitude of NS, EW, and up-down components of the earthquake motion at Tokyo was 12.0 mm, 14.0 mm and 3.0 mm respectively, while the initial motion was composed of 80 μ south, 67 μ west and 20 μ down movements.

  16. Numerical Modeling of 3D Seismic Wave Propagation around Yogyakarta, the Southern Part of Central Java, Indonesia, Using Spectral-Element Method on MPI-GPU Cluster

    Science.gov (United States)

    Sudarmaji; Rudianto, Indra; Eka Nurcahya, Budi

    2018-04-01

    A strong tectonic earthquake with a magnitude of 5.9 Richter scale has been occurred in Yogyakarta and Central Java on May 26, 2006. The earthquake has caused severe damage in Yogyakarta and the southern part of Central Java, Indonesia. The understanding of seismic response of earthquake among ground shaking and the level of building damage is important. We present numerical modeling of 3D seismic wave propagation around Yogyakarta and the southern part of Central Java using spectral-element method on MPI-GPU (Graphics Processing Unit) computer cluster to observe its seismic response due to the earthquake. The homogeneous 3D realistic model is generated with detailed topography surface. The influences of free surface topography and layer discontinuity of the 3D model among the seismic response are observed. The seismic wave field is discretized using spectral-element method. The spectral-element method is solved on a mesh of hexahedral elements that is adapted to the free surface topography and the internal discontinuity of the model. To increase the data processing capabilities, the simulation is performed on a GPU cluster with implementation of MPI (Message Passing Interface).

  17. HIGH WAVE AND COASTAL INUNDATION IN SOUTH OF JAVA AND WEST OF SUMATERA (CASE STUDIES ON 7-10 JUNE 2016

    Directory of Open Access Journals (Sweden)

    Roni Kurniawan

    2017-10-01

    Full Text Available The high wave and spring tide occurred on June 7 to 10, 2016 had led to storm tide and coastal inundation at a number of coastal areas in south of Java and west of Sumatera, this incident caused substantial losses to coastal communities. The aim of this study is to understand the cause of storm tide, so it can be serve as a strategic contribution to assess, evaluate and mitigate the impact. The output of Wavewatch-III (WW3 model and Aviso Altimetry indicates the occurrence high wave in Indian Ocean reach more than 6 meters, this wave triggered by high wind speed around the Mascarene high event in Western Australia. Further analysis based on the output resulted by WW3 showed that the extreme wave in west Sumatera and south of Java (7-10 June, 2016 was dominated by swell waves generated by Mascarene High superposed with the highest diurnal tide as well as sea surface height anomaly, triggers the storm tide that consequentially costed more damaging impact in the south of Java and west of Sumatera. Gelombang tinggi dan pasang air laut yang terjadi pada tanggal 7 -10 Juni 2016 menyebabkan sejumlah wilayah pesisir di selatan Jawa dan Barat Sumatera mengalami gelombang pasang dan banjir rob, yang mengakibatkan kerugian cukup besar bagi masyarakat pesisir. Kajian ini bertujuan untuk mengetahui penyebab terjadinya gelombang pasang tersebut, sehingga dapat bermanfaat sebagai evaluasi dan mitigasi kedepan. Data luaran model Wavewatch-III (WW3 dan Aviso-Satellite altimetry menunjukkan adanya gelombang tinggi lebih dari 6 meter di Samudera Hindia yang dipicu oleh angin kencang di sekitar wilayah kejadian Mascarene High di sebelah barat Australia. Analisis lebih lanjut berdasarkan output yang dihasilkan oleh WW3 menunjukkan bahwa gelombang ekstrim di selatan Jawa dan barat Sumatera (tanggal 7 – 10 Juni 2016 lebih didominasi oleh swell yang dihasilkan oleh kejadian Mascarene High. Terjadinya swell ini bersuperposisi dengan pasang tertinggi dan anomali tinggi

  18. Marked point process for modelling seismic activity (case study in Sumatra and Java)

    Science.gov (United States)

    Pratiwi, Hasih; Sulistya Rini, Lia; Wayan Mangku, I.

    2018-05-01

    Earthquake is a natural phenomenon that is random, irregular in space and time. Until now the forecast of earthquake occurrence at a location is still difficult to be estimated so that the development of earthquake forecast methodology is still carried out both from seismology aspect and stochastic aspect. To explain the random nature phenomena, both in space and time, a point process approach can be used. There are two types of point processes: temporal point process and spatial point process. The temporal point process relates to events observed over time as a sequence of time, whereas the spatial point process describes the location of objects in two or three dimensional spaces. The points on the point process can be labelled with additional information called marks. A marked point process can be considered as a pair (x, m) where x is the point of location and m is the mark attached to the point of that location. This study aims to model marked point process indexed by time on earthquake data in Sumatra Island and Java Island. This model can be used to analyse seismic activity through its intensity function by considering the history process up to time before t. Based on data obtained from U.S. Geological Survey from 1973 to 2017 with magnitude threshold 5, we obtained maximum likelihood estimate for parameters of the intensity function. The estimation of model parameters shows that the seismic activity in Sumatra Island is greater than Java Island.

  19. Paleoseismic Records of 1762 and Similar Prior Earthquakes Along the South-Eastern Coast of Bangladesh

    Science.gov (United States)

    Mondal, D. R.; McHugh, C. M.; Mortlock, R. A.; Gurung, D.; Bastas-Hernandez, A.; Steckler, M. S.; Seeber, L.; Mustaque, S.; Goodbred, S. L., Jr.; Akhter, S. H.; Saha, P.

    2014-12-01

    The great 1762 Arakan earthquake caused subsidence and uplift along 700km of the Arakan coast, and is thought to derive from a huge megathrust rupture reaching northward onto the southeastern coast of Bangladesh. Paleoseismic investigations were conducted in that area to document effects of that and prior earthquakes. U/Th ages obtained from isochron analysis of uplifted dead coral heads of the Poritesspecies, collected along a south to north transect from the islands east coast reveal at least three growth interruptions caused by abrupt relative sea-level changes within the past 1300 years that we interpret to be associated with megathrust ruptures. The ages show distinct events approximately 250, 900 and 1300 years ago. The youngest of these events corresponds to the 1762 Great Arakan earthquake. The two prior events at ~1100 and 700 AD, suggest an average recurrence interval of 400-600 years. Along the coast of Teknaf, we mapped a ~2m uplifted terrace. Marine shells on top of the terrace dated with C-14 at 1695-1791 AD link the uplift to the 1762 Great Arakan earthquake. Based on this evidence and previous work (Wang et al., 2013 and Aung et al., 2008), we estimated the 1762 rupture to be at least 700 km long, from Chebuda Island to the Sitakund anticline encompassing the Teknaf Peninsula. Considering 14 mm/yr convergence rate and 400-600 yrs recurrence interval, this rupture zone has now accumulated elastic deformation to generate a M~8.4 earthquake, close to the M8.8 estimated by Cummins (2007) for the 1762 earthquake. Published recurrence intervals based on C-14 ages along the Myanmar coast ~90 km south of Bangladesh reveal three ruptures within the last 3400 years with an average recurrence interval of 1000-2000 years (Aung et al., 2008). While the 1762 rupture reached across both areas, some of the prior ruptures may be confined to one or the other of these areas, with a smaller magnitude. Our precise U-Th ages provide evidence of recurrence intervals of

  20. Learning Java

    CERN Document Server

    Niemeyer, Patrick

    2005-01-01

    Version 5.0 of the Java 2 Standard Edition SDK is the most important upgrade since Java first appeared a decade ago. With Java 5.0, you'll not only find substantial changes in the platform, but to the language itself-something that developers of Java took five years to complete. The main goal of Java 5.0 is to make it easier for you to develop safe, powerful code, but none of these improvements makes Java any easier to learn, even if you've programmed with Java for years. And that means our bestselling hands-on tutorial takes on even greater significance. Learning Java is the most widely sou

  1. JavaD: Bringing Ownership Domains to Mainstream Java

    National Research Council Canada - National Science Library

    Abi-Antoun, Marwan; Aldrich, Jonathan

    2006-01-01

    .... As a result, none of the tool support for Java programs is available for AliasJava programs, making it harder to justify the case that Java programs are easier to evolve with Alias-Java annotations than without...

  2. Spatio-Temporal Distribution of Landslides in Java and the Triggering Factors

    Directory of Open Access Journals (Sweden)

    Danang Sri Hadmoko

    2017-07-01

    Full Text Available Java Island, the most populated island of Indonesia, is prone to landslide disasters. Their occurrence and impact have increased mainly as the result of natural factors, aggravated by human imprint. This paper is intended to analyse: (1 the spatio-temporal variation of landslides in Java during short term and long-term periods, and (2 their causative factors such as rainfall, topography, geology, earthquakes, and land-use. The evaluation spatially and temporally of historical landslides and consequences were based on the landslide database covering the period of 1981 – 2007 in the GIS environment. Database showed that landslides distributed unevenly between West Java (67 %, Central Java (29 % and East Java (4 %. Slope failures were most abundant on the very intensively weathered zone of old volcanic materials on slope angles of 30O – 40O. Rainfall threshold analysis showed that shallow landslides and deep-seated landslides were triggered by rainfall events of 300 – 600 mm and > 600 mm respectively of antecedent rainfall during 30 consecutive days, and many cases showed that the landslides were not always initiated by intense rainfall during the landslide day. Human interference plays an important role in landslide occurrence through land conversion from natural forest to dryland agriculture which was the host of most of landslides in Java. These results and methods can be used as valuable information on the spatio-temporal characteristics of landslides in Java and their relationship with causative factors, thereby providing a sound basis for landslide investigation in more detail.

  3. Genotype and Phenotype Characterization of Indonesian Phytophthora infestans Isolates Collected From Java and Outside Java Island

    Directory of Open Access Journals (Sweden)

    Dwinita Wikan Utami

    2017-10-01

    Full Text Available Phytophthora infestans, the cause of late blight disease, is a worldwide problem in potato and tomato production. To understand the biology and ecology of P. infestans and the mechanism of spatial and temporal factors for the variation in P. infestans, the population diversity is required to be fully characterized. The objective of this research is to characterize the diversity of P. infestans. Surveys and collection of P. infestans isolates were performed on many locations of potato's production center in Indonesia, as in Java (West Java, Central Java, and East Java and outside of Java islands (Medan, Jambi, and Makassar. The collected isolates were then analyzed for their virulence diversity via plant disease bioassays on differential varieties and genotype diversity based on fragment analysis genotypes profile using the multiplexing 20 simple sequence repeat markers. The virulence characterization showed that the isolates group from Makassar, South Sulawesi, have the broad spectrum virulence pathotype to R1, R2, R3, R4, and R5 differential plants. Simple sequence repeat genotype characterization showed that in general, the population structure of P. infestans grouping is accordance to the origin of the sampling locations. The diversity between populations is lower than diversity between isolates in one location population groups. The characters of P. infestans population showed that the population diversity of P. infestans more occurs on individual isolates in one location compared with the diversity between the population location sampling.

  4. After an Earthquake: Accessing Near Real-Time Data in the Classroom

    Science.gov (United States)

    Bravo, T. K.; Coleman, B.; Hubenthal, M.; Owens, T. J.; Taber, J.; Welti, R.; Weertman, B. R.

    2010-12-01

    One of the best ways to engage students in scientific content is to give them opportunities to work with real scientific instruments and data and enable them to experience the discovery of scientific information. In addition, newsworthy earthquakes can capture the attention and imagination of students. IRIS and collaborating partners provide a range of options to leverage that attention through access to near-real-time earthquake location and waveform data stored in the IRIS Data Management System and elsewhere via a number of web-based tools and a new Java-based application. The broadest audience is reached by the Seismic Monitor, a simple Web-based tool for observing near-real-time seismicity. The IRIS Earthquake Browser (IEB) allows users to explore recent and cataloged earthquakes and aftershock patterns online with more flexibility, and K-12 classroom activities for understanding plate tectonics and estimating seismic hazards have been designed around its use. Waveforms are easily viewed and explored on the web using the Rapid Earthquake Viewer (REV), developed by the University of South Carolina in collaboration with IRIS E&O. Data from recent well-known earthquakes available via REV are used in exercises to determine Earth’s internal structure and to locate earthquakes. Three component data is presented to the students, allowing a much more realistic analysis of the data than is presented in most textbooks. The Seismographs in Schools program uses real-time data in the classroom to interest and engage students about recent earthquakes. Through the IRIS website, schools can share event data and 24-hr images. Additionally, data is available in real-time via the API. This API allows anyone to extract data, re-purpose it, and display it however they need to, as is being done by the British Geological Survey Seismographs in Schools program. Over 350 schools throughout the US and internationally are currently registered with the IRIS Seismographs in Schools

  5. Testing continuous earthquake detection and location in Alentejo (South Portugal) by waveform coherency analysis

    Science.gov (United States)

    Matos, Catarina; Grigoli, Francesco; Cesca, Simone; Custódio, Susana

    2015-04-01

    In the last decade a permanent seismic network of 30 broadband stations, complemented by dense temporary deployments, covered Portugal. This extraordinary network coverage enables now the computation of a high-resolution image of the seismicity of Portugal, which in turn will shed light on the seismotectonics of Portugal. The large data volumes available cannot be analyzed by traditional time-consuming manual location procedures. In this presentation we show first results on the automatic detection and location of earthquakes occurred in a selected region in the south of Portugal Our main goal is to implement an automatic earthquake detection and location routine in order to have a tool to quickly process large data sets, while at the same time detecting low magnitude earthquakes (i.e., lowering the detection threshold). We present a modified version of the automatic seismic event location by waveform coherency analysis developed by Grigoli et al. (2013, 2014), designed to perform earthquake detections and locations in continuous data. The event detection is performed by continuously computing the short-term-average/long-term-average of two different characteristic functions (CFs). For the P phases we used a CF based on the vertical energy trace, while for S phases we used a CF based on the maximum eigenvalue of the instantaneous covariance matrix (Vidale 1991). Seismic event detection and location is obtained by performing waveform coherence analysis scanning different hypocentral coordinates. We apply this technique to earthquakes in the Alentejo region (South Portugal), taking advantage from a small aperture seismic network installed in the south of Portugal for two years (2010 - 2011) during the DOCTAR experiment. In addition to the good network coverage, the Alentejo region was chosen for its simple tectonic setting and also because the relationship between seismicity, tectonics and local lithospheric structure is intriguing and still poorly understood. Inside

  6. Assessment of wave energy potential along the south coast of Java Island

    Science.gov (United States)

    Song, Qingyang; Mayerle, Roberto

    2018-04-01

    The south coast of Java Island has a great potential for wave energy. A long-term analysis of a 10-year wave dataset obtained from the ERA-Interim database is performed for preliminary wave energy assessment in this area, and it was seen that the annual median power is expected to exceed 20kW/m along the coast. A coastal wave model with an unstructured grid was run to reveal the wave conditions and to assess the wave energy potential along the coast in detail. The effect of swells and local wind on the wave conditions is investigated. Annual median wave power, water depth and distance from the coast are selected as criteria for the identification of suitable locations for wave energy conversion. Two zones within the study area emerge to be suitable for wave energy extraction. Swells from the southwest turned out to be the major source of wave energy and highest monthly median wave power reached about 33kW/m.

  7. Java Dust: How Small Can Embedded Java Be?

    DEFF Research Database (Denmark)

    Caska, James; Schoeberl, Martin

    2011-01-01

    Java is slowly being accepted as a language and platform for embedded devices. However, the memory requirements of the Java library and runtime are still troublesome. A Java system is considered small when it requires less than 1 MB, and within the embedded domain small microcontollers with a few...... KB on-chip Flash memory and even less on-chip RAM are very common. For such small devices Java is a clearly challenging. In this paper we present the combination of the Java compiler Muvium for microcontrollers with the tiny soft-core Leros for an FPGA. To the best of our knowledge, the presented...... embedded Java system is the smallest Java system available. The Leros processor consumes less than 5% of the logic cells of the smallest FPGA from Altera and the Muvium compiler produces a JVM, including the Java application, that can execute in a few KB ROM and less than 1 KB RAM. The Leros processor...

  8. Tsunami vulnerability of buildings and people in South Java - field observations after the July 2006 Java tsunami

    Science.gov (United States)

    Reese, S.; Cousins, W. J.; Power, W. L.; Palmer, N. G.; Tejakusuma, I. G.; Nugrahadi, S.

    2007-10-01

    A team of scientists from New Zealand and Indonesia undertook a reconnaissance mission to the South Java area affected by the tsunami of 17 July 2006. The team used GPS-based surveying equipment to measure ground profiles and inundation depths along 17 transects across affected areas near the port city of Cilacap and the resort town of Pangandaran. The purpose of the work was to acquire data for calibration of models used to estimate tsunami inundations, casualty rates and damage levels. Additional information was gathered from interviews with eyewitnesses. The degree of damage observed was diverse, being primarily dependant on water depth and the building construction type. Water depths were typically 2 to 4 m where housing was seriously damaged. Damage levels ranged from total for older brick houses, to about 50% for newer buildings with rudimentary reinforced-concrete beams and columns, to 5-20% for engineered residential houses and multi-storey hotels with heavier RC columns. "Punchout" of weak brick walls was widespread. Despite various natural warning signs very few people were alerted to the impending tsunami. Hence, the death toll was significant, with average death and injury rates both being about 10% of the people exposed, for water depths of about 3 m.

  9. A Test Case for the Source Inversion Validation: The 2014 ML 5.5 Orkney, South Africa Earthquake

    Science.gov (United States)

    Ellsworth, W. L.; Ogasawara, H.; Boettcher, M. S.

    2017-12-01

    The ML5.5 earthquake of August 5, 2014 occurred on a near-vertical strike slip fault below abandoned and active gold mines near Orkney, South Africa. A dense network of surface and in-mine seismometers recorded the earthquake and its aftershock sequence. In-situ stress measurements and rock samples through the damage zone and rupture surface are anticipated to be available from the "Drilling into Seismogenic Zones of M2.0-M5.5 Earthquakes in South African gold mines" project (DSeis) that is currently progressing toward the rupture zone (Science, doi: 10.1126/science.aan6905). As of 24 July, 95% of drilled core has been recovered from a 427m-section of the 1st hole from 2.9 km depth with minimal core discing and borehole breakouts. A 2nd hole is planned to intersect the fault at greater depth. Absolute differential stress will be measured along the holes and frictional characteristics of the recovered core will be determined in the lab. Surface seismic reflection data and exploration drilling from the surface down to the mining horizon at 3km depth is also available to calibrate the velocity structure above the mining horizon and image reflective geological boundaries and major faults below the mining horizon. The remarkable quality and range of geophysical data available for the Orkney earthquake makes this event an ideal test case for the Source Inversion Validation community using actual seismic data to determine the spatial and temporal evolution of earthquake rupture. We invite anyone with an interest in kinematic modeling to develop a rupture model for the Orkney earthquake. Seismic recordings of the earthquake and information on the faulting geometry can be found in Moyer et al. (2017, doi: 10.1785/0220160218). A workshop supported by the Southern California Earthquake Center will be held in the spring of 2018 to compare kinematic models. Those interested in participating in the modeling exercise and the workshop should contact the authors for additional

  10. Anatomy of the western Java plate interface from depth-migrated seismic images

    Science.gov (United States)

    Kopp, H.; Hindle, D.; Klaeschen, D.; Oncken, O.; Reichert, C.; Scholl, D.

    2009-01-01

    Newly pre-stack depth-migrated seismic images resolve the structural details of the western Java forearc and plate interface. The structural segmentation of the forearc into discrete mechanical domains correlates with distinct deformation styles. Approximately 2/3 of the trench sediment fill is detached and incorporated into frontal prism imbricates, while the floor sequence is underthrust beneath the d??collement. Western Java, however, differs markedly from margins such as Nankai or Barbados, where a uniform, continuous d??collement reflector has been imaged. In our study area, the plate interface reveals a spatially irregular, nonlinear pattern characterized by the morphological relief of subducted seamounts and thicker than average patches of underthrust sediment. The underthrust sediment is associated with a low velocity zone as determined from wide-angle data. Active underplating is not resolved, but likely contributes to the uplift of the large bivergent wedge that constitutes the forearc high. Our profile is located 100 km west of the 2006 Java tsunami earthquake. The heterogeneous d??collement zone regulates the friction behavior of the shallow subduction environment where the earthquake occurred. The alternating pattern of enhanced frictional contact zones associated with oceanic basement relief and weak material patches of underthrust sediment influences seismic coupling and possibly contributed to the heterogeneous slip distribution. Our seismic images resolve a steeply dipping splay fault, which originates at the d??collement and terminates at the sea floor and which potentially contributes to tsunami generation during co-seismic activity. ?? 2009 Elsevier B.V.

  11. Anatomy of the western Java plate interface from depth-migrated seismic images

    Science.gov (United States)

    Kopp, H.; Hindle, D.; Klaeschen, D.; Oncken, O.; Reichert, C.; Scholl, D.

    2009-11-01

    Newly pre-stack depth-migrated seismic images resolve the structural details of the western Java forearc and plate interface. The structural segmentation of the forearc into discrete mechanical domains correlates with distinct deformation styles. Approximately 2/3 of the trench sediment fill is detached and incorporated into frontal prism imbricates, while the floor sequence is underthrust beneath the décollement. Western Java, however, differs markedly from margins such as Nankai or Barbados, where a uniform, continuous décollement reflector has been imaged. In our study area, the plate interface reveals a spatially irregular, nonlinear pattern characterized by the morphological relief of subducted seamounts and thicker than average patches of underthrust sediment. The underthrust sediment is associated with a low velocity zone as determined from wide-angle data. Active underplating is not resolved, but likely contributes to the uplift of the large bivergent wedge that constitutes the forearc high. Our profile is located 100 km west of the 2006 Java tsunami earthquake. The heterogeneous décollement zone regulates the friction behavior of the shallow subduction environment where the earthquake occurred. The alternating pattern of enhanced frictional contact zones associated with oceanic basement relief and weak material patches of underthrust sediment influences seismic coupling and possibly contributed to the heterogeneous slip distribution. Our seismic images resolve a steeply dipping splay fault, which originates at the décollement and terminates at the sea floor and which potentially contributes to tsunami generation during co-seismic activity.

  12. Goat-based aid programme in Central Java: An effective intervention for the poor and vulnerable?

    NARCIS (Netherlands)

    Budisatria, I.G.S.; Udo, H.M.J.

    2013-01-01

    This study evaluated a goat-based aid programme developed to facilitate the recovery of vulnerable people in an earthquake affected area in Central Java, Indonesia. Farmers, organised in farmers’ groups, received a package of one male and four female goats. In total, 72 farmers from 6 farmers’

  13. Formalising the Safety of Java, the Java Virtual Machine and Java Card

    OpenAIRE

    Hartel, Pieter H.; Moreau, Luc

    2001-01-01

    We review the existing literature on Java safety, emphasizing formal approaches, and the impact of Java safety on small footprint devices such as smart cards. The conclusion is that while a lot of good work has been done, a more concerted effort is needed to build a coherent set of machine readable formal models of the whole of Java and its implementation. This is a formidable task but we believe it is essential to building trust in Java safety, and thence to achieve ITSEC level 6 or Common C...

  14. Beginning JavaFX

    CERN Document Server

    Mohan, Praveen

    2010-01-01

    The open source JavaFX platform offers a Java-based approach to rich Internet application (RIA) development - an alternative to Adobe Flash/Flex and Microsoft Silverlight. At over 100 million downloads, the new JavaFX is poised to be a significant player now. Written by a JavaFX engineer and developer, this book is one of the first on the new JavaFX platform to give you the following: * The fundamentals of JavaFX scripting on desktop and mobile platforms * Examples of RIAs using JavaFX Graphics * Media and animation using JavaFX See how JavaFX gives you dynamic Java effects in your RIA applica

  15. The Mw6.0 24 August 2014 South Napa earthquake

    Science.gov (United States)

    Brocher, Thomas M.; Baltay, Annemarie S.; Hardebeck, Jeanne L.; Pollitz, Fred F.; Murray, Jessica R.; Llenos, Andrea L.; Schwartz, David P.; Blair, James Luke; Ponti, Daniel J.; Lienkaemper, James J.; Langenheim, V.E.; Dawson, Timothy E.; Hudnut, Kenneth W.; Shelly, David R.; Dreger, Douglas S.; Boatwright, John; Aagaard, Brad T.; Wald, David J.; Allen, Richard M.; Barnhart, William D.; Knudsen, Keith L.; Brooks, Benjamin A.; Scharer, Katherine M.

    2015-01-01

    The Mw 6.0 South Napa earthquake, which occurred at 10:20 UTC 24 August 2014 was the largest earthquake to strike the greater San Francisco Bay area since the Mw 6.9 1989 Loma Prieta earthquake. The rupture from this right‐lateral earthquake propagated mostly unilaterally to the north and up‐dip, directing the strongest shaking toward the city of Napa, where peak ground accelerations (PGAs) between 45%g and 61%g were recorded and modified Mercalli intensities (MMIs) of VII–VIII were reported. Tectonic surface rupture with dextral slip of up to 46 cm was observed on a 12.5 km long segment, some of which was along a previously mapped strand of the West Napa fault system, although the rupture extended to the north of the mapped Quaternary strand. Modeling of seismic and geodetic data suggests an average coseismic slip of 50 cm, with a maximum slip of about 1 m at depths of 10–11 km. We observed up to 35 cm of afterslip along the surface trace in the week following the mainshock, primarily along the southern half of the surface rupture that experienced relatively little coseismic offset. Relocation of the sparse aftershock sequence suggests en echelon southwest‐ and northeast‐dipping fault planes, reflective of the complex fault geometry in this region. The Napa basin and historic and late Holocene alluvial flood deposits in downtown Napa amplified the ground motions there. Few ground failures were mapped, reflecting the dry season (as well as a persistent drought that had lowered the groundwater table) and the short duration of strong shaking in the epicentral area.

  16. Java Series: Java Essentials I. what is Java. Basic Language Constructs

    CERN Multimedia

    CERN. Geneva

    2000-01-01

    The tutorial will firstly give a very first general introduction of what is the JAVA programming language and an overview of what the Java Development environment consists of. It will briefly explain its relation to the Internet, Web browsers and Operating Systems and show how to access Java at CERN. Then, the tutorial will be centred on explaining the basic language constructs to create classes, instances, and implement inheritance, destroy objects, etc. It will show the usage of interfaces. The tutorial is open to everyone. Attendants are required to have a basic intuition on what Object Orientation is, or to have followed the previous tutorial on the Java Serires. Organiser(s): M.Marquina and R.Ramos /IT-User Support

  17. Academia Sinica, TW E-science to Assistant Seismic Observations for Earthquake Research, Monitor and Hazard Reduction Surrounding the South China Sea

    Science.gov (United States)

    Huang, Bor-Shouh; Liu, Chun-Chi; Yen, Eric; Liang, Wen-Tzong; Lin, Simon C.; Huang, Win-Gee; Lee, Shiann-Jong; Chen, Hsin-Yen

    Experience from the 1994 giant Sumatra earthquake, seismic and tsunami hazard have been considered as important issues in the South China Sea and its surrounding region, and attracted many seismologist's interesting. Currently, more than 25 broadband seismic instruments are currently operated by Institute of Earth Sciences, Academia Sinica in northern Vietnam to study the geodynamic evolution of the Red river fracture zone and rearranged to distribute to southern Vietnam recently to study the geodynamic evolution and its deep structures of the South China Sea. Similar stations are planned to deploy in Philippines in near future. In planning, some high quality stations may be as permanent stations and added continuous GPS observations, and instruments to be maintained and operated by several cooperation institutes, for instance, Institute of Geophysics, Vietnamese Acadamy of Sciences and Technology in Vietnam and Philippine Institute of Volcanology and Seismology in Philippines. Finally, those stations will be planed to upgrade as real time transmission stations for earthquake monitoring and tsunami warning. However, high speed data transfer within different agencies is always a critical issue for successful network operation. By taking advantage of both EGEE and EUAsiaGrid e-Infrastructure, Academia Sinica Grid Computing Centre coordinates researchers from various Asian countries to construct a platform to high performance data transfer for huge parallel computation. Efforts from this data service and a newly build earthquake data centre for data management may greatly improve seismic network performance. Implementation of Grid infrastructure and e-science issues in this region may assistant development of earthquake research, monitor and natural hazard reduction. In the near future, we will search for new cooperation continually from the surrounding countries of the South China Sea to install new seismic stations to construct a complete seismic network of the

  18. Sedimentary deposits study of the 2006 Java tsunami, in Pangandaran, West Java (preliminary result)

    Energy Technology Data Exchange (ETDEWEB)

    Maemunah, Imun, E-mail: imun-m2001@yahoo.com [Geological Agency, Ministry of Energy and Mineral Resources (Indonesia); Institute Technology of Bandung (Indonesia); Suparka, Emmy, E-mail: emmy@gc.itb.ac.id; Puspito, Nanang T, E-mail: nanang@staff.itb.ac.id [Institute Technology of Bandung (Indonesia); Hidayati, Sri, E-mail: shidayati@gmail.com [Geological Agency, Ministry of Energy and Mineral Resources (Indonesia)

    2015-04-24

    The 2006 Java Earthquake (Mw 7.2) has generated a tsunami that reached Pangandaran coastal plain with 9.7 m above sea level height of wave. In 2014 we examined the tsunami deposit exposed in shallow trenches along a∼300 m at 5 transect from shoreline to inland on Karapyak and Madasari, Pangandaran. We documented stratigraphically and sedimentologically, the characteristics of Java Tsunami deposit on Karapyak and Madasari and compared both sediments. In local farmland a moderately-sorted, brown soil is buried by a poorly-sorted, grey, medium-grained sand-sheet. The tsunami deposit was distinguished from the underlying soil by a pronounced increase in grain size that becomes finner upwards and landwards. Decreasing concentration of coarse size particles with distance toward inland are in agreement with grain size analysis. The thickest tsunami deposit is about 25 cm found at 84 m from shoreline in Madasari and about 15 cm found at 80 m from shoreline in Karapyak. The thickness of tsunami deposits in some transect become thinner landward but in some other transect lack a consistent suggested strongly affected by local topography. Tsunami deposits at Karapyak and Madasari show many similarities. Both deposits consist of coarse sand that sharply overlies a finer sandy soil. The presence mud drapes and other sedimentary structure like graded bedding, massive beds, mud clasts in many locations shows a dynamics process of tsunami waves. The imbrication coarse and shell fragments of the 2006 Java, tsunami deposits also provide information about the curent direction, allowing us to distinguish run up deposits from backwash deposits.

  19. Sedimentary deposits study of the 2006 Java tsunami, in Pangandaran, West Java (preliminary result)

    International Nuclear Information System (INIS)

    Maemunah, Imun; Suparka, Emmy; Puspito, Nanang T; Hidayati, Sri

    2015-01-01

    The 2006 Java Earthquake (Mw 7.2) has generated a tsunami that reached Pangandaran coastal plain with 9.7 m above sea level height of wave. In 2014 we examined the tsunami deposit exposed in shallow trenches along a∼300 m at 5 transect from shoreline to inland on Karapyak and Madasari, Pangandaran. We documented stratigraphically and sedimentologically, the characteristics of Java Tsunami deposit on Karapyak and Madasari and compared both sediments. In local farmland a moderately-sorted, brown soil is buried by a poorly-sorted, grey, medium-grained sand-sheet. The tsunami deposit was distinguished from the underlying soil by a pronounced increase in grain size that becomes finner upwards and landwards. Decreasing concentration of coarse size particles with distance toward inland are in agreement with grain size analysis. The thickest tsunami deposit is about 25 cm found at 84 m from shoreline in Madasari and about 15 cm found at 80 m from shoreline in Karapyak. The thickness of tsunami deposits in some transect become thinner landward but in some other transect lack a consistent suggested strongly affected by local topography. Tsunami deposits at Karapyak and Madasari show many similarities. Both deposits consist of coarse sand that sharply overlies a finer sandy soil. The presence mud drapes and other sedimentary structure like graded bedding, massive beds, mud clasts in many locations shows a dynamics process of tsunami waves. The imbrication coarse and shell fragments of the 2006 Java, tsunami deposits also provide information about the curent direction, allowing us to distinguish run up deposits from backwash deposits

  20. Tsunami vulnerability of buildings and people in South Java – field observations after the July 2006 Java tsunami

    Directory of Open Access Journals (Sweden)

    S. Nugrahadi

    2007-10-01

    Full Text Available A team of scientists from New Zealand and Indonesia undertook a reconnaissance mission to the South Java area affected by the tsunami of 17 July 2006. The team used GPS-based surveying equipment to measure ground profiles and inundation depths along 17 transects across affected areas near the port city of Cilacap and the resort town of Pangandaran. The purpose of the work was to acquire data for calibration of models used to estimate tsunami inundations, casualty rates and damage levels. Additional information was gathered from interviews with eyewitnesses. The degree of damage observed was diverse, being primarily dependant on water depth and the building construction type. Water depths were typically 2 to 4 m where housing was seriously damaged. Damage levels ranged from total for older brick houses, to about 50% for newer buildings with rudimentary reinforced-concrete beams and columns, to 5–20% for engineered residential houses and multi-storey hotels with heavier RC columns. "Punchout" of weak brick walls was widespread. Despite various natural warning signs very few people were alerted to the impending tsunami. Hence, the death toll was significant, with average death and injury rates both being about 10% of the people exposed, for water depths of about 3 m.

  1. Java for dummies

    CERN Document Server

    Burd, Barry

    2011-01-01

    The top-selling beginning Java book is now fully updated for Java 7! Java is the platform-independent, object-oriented programming language used for developing web and mobile applications. The revised version offers new functionality and features that have programmers excited, and this popular guide covers them all. This book helps programmers create basic Java objects and learn when they can reuse existing code. It's just what inexperienced Java developers need to get going quickly with Java 2 Standard Edition 7.0 (J2SE 7.0) and Java Development Kit 7.0 (JDK 7). Explores how the new version o

  2. Sources of Increased Spring and Streamflow Caused by the 2014 South Napa Earthquake

    Science.gov (United States)

    Rytuba, J. J.; Holzer, T. L.

    2014-12-01

    Seasonally dry springs and creeks began flowing over a broad region in the hills around Napa following the M6.0 South Napa earthquake on August 24, 2014. Flows in hillside creek beds, which were dry before the earthquake, were reported from 19 km west, to 6 km east, and 18 km north of Napa and the epicenter, an area that shook at MMI≥VI. The exact timing of the increased flow is unknown because the earthquake occurred at 3:20 AM PDT. A gaging station on the Napa River, which is downstream from several tributaries that began flowing after the earthquake, showed a sudden increase of flow rate within 45 minutes following the earthquake. The sudden increase at the gaging station suggests flows initiated either contemporaneously with or very soon after the strong shaking. This timing is consistent with eyewitness accounts of other streams and springs at daylight, a few hours after the earthquake. One of the largest increases of streamflow was in Green Valley, where a streamflow rate of about 100 cubic hectometers per day was measured in Wild Horse Creek. Two types of waters are being discharged in the Wild Horse Creek drainage: 1) water with low iron concentration that has exchanged with rhyolitic flows and tuffs in the upper part of the drainage; and 2) high iron concentration water that has exchanged with basaltic andesite in the middle part of drainage (vertical interval of about 75 meters). The high iron waters are depositing FeOOH other iron phases. Mixing of the two water types results in water with pH 6.9 and conductivity of 0.197 mS. This water is used by the Vallejo Water District for domestic purposes after it is mixed with recent surface water runoff stored in Lake Frey reservoir in order to improve its quality. Other drainages that have increased flow since the earthquake have water chemistry consistent with exchange with rhyolitic flows and tuffs that are the dominant rock type in these drainages.

  3. Living with earthquakes - development and usage of earthquake-resistant construction methods in European and Asian Antiquity

    Science.gov (United States)

    Kázmér, Miklós; Major, Balázs; Hariyadi, Agus; Pramumijoyo, Subagyo; Ditto Haryana, Yohanes

    2010-05-01

    Earthquakes are among the most horrible events of nature due to unexpected occurrence, for which no spiritual means are available for protection. The only way of preserving life and property is applying earthquake-resistant construction methods. Ancient Greek architects of public buildings applied steel clamps embedded in lead casing to hold together columns and masonry walls during frequent earthquakes in the Aegean region. Elastic steel provided strength, while plastic lead casing absorbed minor shifts of blocks without fracturing rigid stone. Romans invented concrete and built all sizes of buildings as a single, unflexible unit. Masonry surrounding and decorating concrete core of the wall did not bear load. Concrete resisted minor shaking, yielding only to forces higher than fracture limits. Roman building traditions survived the Dark Ages and 12th century Crusader castles erected in earthquake-prone Syria survive until today in reasonably good condition. Concrete and steel clamping persisted side-by-side in the Roman Empire. Concrete was used for cheap construction as compared to building of masonry. Applying lead-encased steel increased costs, and was avoided whenever possible. Columns of the various forums in Italian Pompeii mostly lack steel fittings despite situated in well-known earthquake-prone area. Whether frequent recurrence of earthquakes in the Naples region was known to inhabitants of Pompeii might be a matter of debate. Seemingly the shock of the AD 62 earthquake was not enough to apply well-known protective engineering methods throughout the reconstruction of the city before the AD 79 volcanic catastrophe. An independent engineering tradition developed on the island of Java (Indonesia). The mortar-less construction technique of 8-9th century Hindu masonry shrines around Yogyakarta would allow scattering of blocks during earthquakes. To prevent dilapidation an intricate mortise-and-tenon system was carved into adjacent faces of blocks. Only the

  4. Strain Variation along Cimandiri Fault, West Java Based on Continuous and Campaign GPS Observation From 2006-2016

    Science.gov (United States)

    Safitri, A. A.; Meilano, I.; Gunawan, E.; Abidin, H. Z.; Efendi, J.; Kriswati, E.

    2018-03-01

    The Cimandiri fault which is running in the direction from Pelabuhan Ratu to Padalarang is the longest fault in West Java with several previous shallow earthquakes in the last 20 years. By using continues and campaign GPS observation from 2006-2016, we obtain the deformation pattern along the fault through the variation of strain tensor. We use the velocity vector of GPS station which is fixed in stable International Terrestrial Reference Frame 2008 to calculate horizontal strain tensor. Least Square Collocation is applied to produce widely dense distributed velocity vector and optimum scale factor for the Least Square Weighting matrix. We find that the strain tensor tend to change from dominantly contraction in the west to dominantly extension to the east of fault. Both the maximum shear strain and dilatation show positive value along the fault and increasing from the west to the east. The findings of strain tensor variation along Cimandiri Fault indicate the post seismic effect of the 2006 Java Earthquake.

  5. Links Between Earthquake Characteristics and Subducting Plate Heterogeneity in the 2016 Pedernales Ecuador Earthquake Rupture Zone

    Science.gov (United States)

    Bai, L.; Mori, J. J.

    2016-12-01

    The collision between the Indian and Eurasian plates formed the Himalayas, the largest orogenic belt on the Earth. The entire region accommodates shallow earthquakes, while intermediate-depth earthquakes are concentrated at the eastern and western Himalayan syntaxis. Here we investigate the focal depths, fault plane solutions, and source rupture process for three earthquake sequences, which are located at the western, central and eastern regions of the Himalayan orogenic belt. The Pamir-Hindu Kush region is located at the western Himalayan syntaxis and is characterized by extreme shortening of the upper crust and strong interaction of various layers of the lithosphere. Many shallow earthquakes occur on the Main Pamir Thrust at focal depths shallower than 20 km, while intermediate-deep earthquakes are mostly located below 75 km. Large intermediate-depth earthquakes occur frequently at the western Himalayan syntaxis about every 10 years on average. The 2015 Nepal earthquake is located in the central Himalayas. It is a typical megathrust earthquake that occurred on the shallow portion of the Main Himalayan Thrust (MHT). Many of the aftershocks are located above the MHT and illuminate faulting structures in the hanging wall with dip angles that are steeper than the MHT. These observations provide new constraints on the collision and uplift processes for the Himalaya orogenic belt. The Indo-Burma region is located south of the eastern Himalayan syntaxis, where the strike of the plate boundary suddenly changes from nearly east-west at the Himalayas to nearly north-south at the Burma Arc. The Burma arc subduction zone is a typical oblique plate convergence zone. The eastern boundary is the north-south striking dextral Sagaing fault, which hosts many shallow earthquakes with focal depth less than 25 km. In contrast, intermediate-depth earthquakes along the subduction zone reflect east-west trending reverse faulting.

  6. JavaScript bible

    CERN Document Server

    Goodman, Danny; Novitski, Paul; Rayl, Tia Gustaffl

    2009-01-01

    The bestselling JavaScript reference, now updated to reflect changes in technology and best practices. As the most comprehensive book on the market, the JavaScript Bible is a classic bestseller that keeps you up to date on the latest changes in JavaScript, the leading technology for incorporating interactivity into Web pages. Part tutorial, part reference, this book serves as both a learning tool for building new JavaScript skills as well as a detailed reference for the more experienced JavaScript user. You'll get up-to-date coverage on the latest JavaScript practices that have been implemente

  7. Begining Java EE 7

    CERN Document Server

    Gonclaves, Antonio

    2013-01-01

    Java Enterprise Edition (Java EE) continues to be one of the leading Java technologies and platforms. Beginning Java EE 7 is the first tutorial book on Java EE 7. Step by step and easy to follow, this book describes many of the Java EE 7 specifications and reference implementations, and shows them in action using practical examples. This definitive book also uses the newest version of GlassFish to deploy and administer the code examples. Written by an expert member of the Java EE specification request and review board in the Java Community Process (JCP), this book contains the best information possible, from an expert’s perspective on enterprise Java technologies.

  8. Spectra of the earthquake sequence February-March, 1981, in south-central Sweden

    OpenAIRE

    O. Kulhánek; T. van Eck; N. John; K. Meyer; Rutger Wahlström

    1983-01-01

    On February 13, 1981, a relatively strong earthquake occurred in the Lake Vanern region in south-central Sweden. The shock had a magnitude of M"SUB L" = 3.3 and was followed within three weeks by three aftershocks, with magnitudes 0.5 = or < M"SUB L" = or < 1.0. The focal mechanism solution of the main shock indicates reverse faulting with a strike in the N-S or NE-SW direction and a nearly horizontal compressional stress. The aftershocks were too small to yield data for a full mechanism solu...

  9. JavaScript Pocket Reference

    CERN Document Server

    Flanagan, David

    1998-01-01

    JavaScript is a powerful, object-based scripting language that can be embedded directly in HTML pages. It allows you to create dynamic, interactive Web-based applications that run completely within a Web browser -- JavaScript is the language of choice for developing Dynamic HTML (DHTML) content. JavaScript can be integrated effectively with CGI and Java to produce sophisticated Web applications, although, in many cases, JavaScript eliminates the need for complex CGI scripts and Java applets altogether. The JavaScript Pocket Reference is a companion volume to JavaScript: The Definitive Guide

  10. Tectonic Divisions Based on Gravity Data and Earthquake Distribution Characteristics in the North South Seismic Belt, China

    Science.gov (United States)

    Tian, T.; Zhang, J.; Jiang, W.

    2017-12-01

    The North South Seismic Belt is located in the middle of China, and this seismic belt can be divided into 12 tectonic zones, including the South West Yunnan (I), the Sichuan Yunnan (II), the Qiang Tang (III), the Bayan Har (IV), the East Kunlun Qaidam (V), the Qi Lian Mountain (VI), the Tarim(VII), the East Alashan (VIII), the East Sichuan (IX), the Ordos(X), the Middle Yangtze River (XI) and the Edge of Qinghai Tibet Block (XII) zone. Based on the Bouguer Gravity data calculated from the EGM2008 model, the Euler deconvolution was used to obtain the edge of tectonic zone to amend the traditional tectonic divisions. In every tectonic zone and the whole research area, the logarithm of the total energy of seismic was calculated. The Time Series Analysis (TSA) for all tectonic zones and the whole area were progressed in R, and 12 equal divisions were made (A1-3, B1-3, C1-3, D1-3) by latitude and longitude as a control group. A simple linear trend fitting of time was used, and the QQ figure was used to show the residual distribution features. Among the zones according to Gravity anomalies, I, II and XII show similar statistical characteristic, with no earthquake free year (on which year there was no earthquake in the zone), and it shows that the more seismic activity area is more similar in statistical characteristic as the large area, no matter how large the zone is or how many earthquakes are in the zone. Zone IV, V, IX, III, VII and VIII show one or several seismic free year during 1970s (IV, V and IX) and 1980s (III, VII and VIII), which may implicate the earthquake activity were low decades ago or the earthquake catalogue were not complete in these zones, or both. Zone VI, X and XI show many earthquake free years even in this decade, which means in these zones the earthquake activity were very low even if the catalogue were not complete. In the control group, the earthquake free year zone appeared random and independent of the seismic density, and in all equal

  11. Fault Rupture Model of the 2016 Gyeongju, South Korea, Earthquake and Its Implication for the Underground Fault System

    Science.gov (United States)

    Uchide, Takahiko; Song, Seok Goo

    2018-03-01

    The 2016 Gyeongju earthquake (ML 5.8) was the largest instrumentally recorded inland event in South Korea. It occurred in the southeast of the Korean Peninsula and was preceded by a large ML 5.1 foreshock. The aftershock seismicity data indicate that these earthquakes occurred on two closely collocated parallel faults that are oblique to the surface trace of the Yangsan fault. We investigate the rupture properties of these earthquakes using finite-fault slip inversion analyses. The obtained models indicate that the ruptures propagated NNE-ward and SSW-ward for the main shock and the large foreshock, respectively. This indicates that these earthquakes occurred on right-step faults and were initiated around a fault jog. The stress drops were up to 62 and 43 MPa for the main shock and the largest foreshock, respectively. These high stress drops imply high strength excess, which may be overcome by the stress concentration around the fault jog.

  12. The Delft-Java Engine

    NARCIS (Netherlands)

    Glossner III, C.J.

    2001-01-01

    In this dissertation, we describe the DELFT-JAVA engine - a 32-bit RISC-based architecture that provides high performance JAVA program execution. More specifically we describe a microarchitecture that accelerates JAVA execution and provide details of the DELFT-JAVA architecture for executing JAVA

  13. Java Series: Java Essentials II Advanced Language Constructs

    CERN Multimedia

    CERN. Geneva

    2000-01-01

    This tutorial will show how Java uses important language constructs, and the set of classes typically used in common tasks. It will briefly show conditional and loops structures and then will introduce the most significative classes included in the java.util package, such as vectors, collections, enumeration, etc. It will finally explain the usage and handling of exceptions in Java.Organiser(s): M.Marquina and R.Ramos /IT-User Support

  14. Java EE 7 handbook

    CERN Document Server

    Pilgrim, Peter A

    2013-01-01

    Java EE 7 Handbook is an example based tutorial with descriptions and explanations.""Java EE 7 Handbook"" is for the developer, designer, and architect aiming to get acquainted with the Java EE platform in its newest edition. This guide will enhance your knowledge about the Java EE 7 platform. Whether you are a long-term Java EE (J2EE) developer or an intermediate level engineer on the JVM with just Java SE behind you, this handbook is for you, the new contemporary Java EE 7 developer!

  15. Safety-critical Java on a Java processor

    DEFF Research Database (Denmark)

    Schoeberl, Martin; Rios Rivas, Juan Ricardo

    2012-01-01

    The safety-critical Java (SCJ) specification is developed within the Java Community Process under specification request number JSR 302. The specification is available as public draft, but details are still discussed by the expert group. In this stage of the specification we need prototype...... implementations of SCJ and first test applications that are written with SCJ, even when the specification is not finalized. The feedback from those prototype implementations is needed for final decisions. To help the SCJ expert group, a prototype implementation of SCJ on top of the Java optimized processor...

  16. Java for dummies

    CERN Document Server

    Burd

    2014-01-01

    The top-selling beginning Java book is now fully updated! As an unstoppably platform-independent, object-oriented programming language, Java is used for developing web and mobile applications. In this up-to-date bestselling book, veteran author Barry Burd shows you how to create basic Java objects and clearly explains when you should simply reuse existing code. Explores how the new version of Java offers more robust functionality and new features such as closures to keep Java competitive with more syntax-friendly languages like Python and Ruby Covers object-oriented programming basics with Ja

  17. The concept of geothermal exploration in west Java based on geophysical data

    Science.gov (United States)

    Gaffar, Eddy Z.

    2018-02-01

    Indonesia has the largest geothermal prospects in the world and most of them are concentrated in Java and Sumatera. The ones on Sumatra island are generally controlled by Sumatra Fault, either the main fault or the second and the third order fault. Geothermal in Java is still influenced by the subduction of oceanic plates from the south of Java island that forms the southern mountains extending from West Java to East Java. From a geophysical point of view, there is still no clue or concept that accelerates the process of geothermal exploration. The concept is that geothermal is located around the volcano (referred to the volcano as a host) and around the fault (fault as a host). There is another method from remote sensing analysis that often shows circular feature. In a study conducted by LIPI, we proposed a new concept for geothermal exploration which is from gravity analysis using Bouguer anomaly data from Java Island, which also show circular feature. The feature is supposed to be an "ancient crater" or a hidden caldera. Therefore, with this hypothesis, LIPI Geophysics team will try to prove whether this symptom can help accelerate the process of geothermal exploration on the island of West Java. Geophysical methods might simplify the exploration of geothermal prospect in West Java. Around the small circular feature, there are some large geothermal prospect areas such as Guntur, Kamojang, Drajat, Papandayan, Karaha Bodas, Patuha. The concept proposed by our team will try be applied to explore geothermal in Java Island for future work.

  18. Earthquake activity along the Himalayan orogenic belt

    Science.gov (United States)

    Bai, L.; Mori, J. J.

    2017-12-01

    The collision between the Indian and Eurasian plates formed the Himalayas, the largest orogenic belt on the Earth. The entire region accommodates shallow earthquakes, while intermediate-depth earthquakes are concentrated at the eastern and western Himalayan syntaxis. Here we investigate the focal depths, fault plane solutions, and source rupture process for three earthquake sequences, which are located at the western, central and eastern regions of the Himalayan orogenic belt. The Pamir-Hindu Kush region is located at the western Himalayan syntaxis and is characterized by extreme shortening of the upper crust and strong interaction of various layers of the lithosphere. Many shallow earthquakes occur on the Main Pamir Thrust at focal depths shallower than 20 km, while intermediate-deep earthquakes are mostly located below 75 km. Large intermediate-depth earthquakes occur frequently at the western Himalayan syntaxis about every 10 years on average. The 2015 Nepal earthquake is located in the central Himalayas. It is a typical megathrust earthquake that occurred on the shallow portion of the Main Himalayan Thrust (MHT). Many of the aftershocks are located above the MHT and illuminate faulting structures in the hanging wall with dip angles that are steeper than the MHT. These observations provide new constraints on the collision and uplift processes for the Himalaya orogenic belt. The Indo-Burma region is located south of the eastern Himalayan syntaxis, where the strike of the plate boundary suddenly changes from nearly east-west at the Himalayas to nearly north-south at the Burma Arc. The Burma arc subduction zone is a typical oblique plate convergence zone. The eastern boundary is the north-south striking dextral Sagaing fault, which hosts many shallow earthquakes with focal depth less than 25 km. In contrast, intermediate-depth earthquakes along the subduction zone reflect east-west trending reverse faulting.

  19. Protected Objects in Java

    DEFF Research Database (Denmark)

    Løvengreen, Hans Henrik; Schwarzer, Jens Christian

    1998-01-01

    We present an implementation of Ada 95's notion of protected objects in Java. The implementation comprises a class library supporting entry queues and a (pre-) compiler translating slightly decorated Java classes to pure Java classes utilizing the library.......We present an implementation of Ada 95's notion of protected objects in Java. The implementation comprises a class library supporting entry queues and a (pre-) compiler translating slightly decorated Java classes to pure Java classes utilizing the library....

  20. Java SOA Cookbook

    CERN Document Server

    Hewitt, Eben

    2009-01-01

    Java SOA Cookbook offers practical solutions and advice to programmers charged with implementing a service-oriented architecture (SOA) in their organization. Instead of providing another conceptual, high-level view of SOA, this cookbook shows you how to make SOA work. It's full of Java and XML code you can insert directly into your applications and recipes you can apply right away. The book focuses primarily on the use of free and open source Java Web Services technologies -- including Java SE 6 and Java EE 5 tools -- but you'll find tips for using commercially available tools as well. Jav

  1. Ground motion for the design basis earthquake at the Savannah River Site, South Carolina based on a deterministic approach

    International Nuclear Information System (INIS)

    Youngs, R.R.; Coppersmith, K.J.; Silva, W.J.; Stephenson, D.E.

    1991-01-01

    Ground motion assessments are presented for evaluation of the seismic safety of K-Reactor at the Savannah River Site. Two earthquake sources were identified as the most significant to seismic hazard at the site, a M 7.5 earthquake occurring at Charleston, South Carolina, and a M 5 event occurring in the site vicinity. These events control the low frequency and high frequency portions of the spectrum, respectively. Three major issues were identified in the assessment of ground motions for the Savannah River site; specification of the appropriate stress drop for the Charleston source earthquake, specification of the appropriate levels of soil damping at large depths for site response analyses, and the appropriateness of western US recordings for specification of ground motions in the eastern US

  2. Superconducting Gravimeters Detect Gravity Fluctuations Induced by Mw 5.7 Earthquake Along South Pacific Rise Few Hours Before the 2011 Mw 9.0 Tohoku-Oki Earthquake

    Directory of Open Access Journals (Sweden)

    Keliang Zhang Jin Ma

    2014-01-01

    Full Text Available Gravity changes sometimes appear before a big earthquake. To determine the possible sources is important for recognizing the mechanism and further geodynamic studies. During the first two hours on March 11 before the Mw 9.0 Tohoku-Oki earthquake, the non-tidal gravity time series of superconducting gravimeters worldwide showed low-frequency (< 0.10 Hz fluctuations with amplitude of ~1 to 4 × 10-8 ms-2 lasting ~10 - 20 minutes. Through comparing global seismicity with the arrival times of seismic waves, we find that the fluctuations were induced by the Mw 5.7 earthquake that occurred at 0:14:54.68 at (53.27°S, 118.18°W along the eastern South Pacific Rise. Several body waves such as P, S are clearly recorded in the station with ~400 km distance to the hypocenter. The fluctuations are in response to the waves that propagate with a velocity of about 4 km s-1. Their amplitudes are proportional to the inverse of the epicentral distances even though the fluctuations of European sites were overlapped with waves associated with a smaller, i.e., Mw 2.6, event in Europe during this period. That is, the Mw 5.7 earthquake induced remarkable gravity fluctuations over long distances at stations all over the world. As such, the foreshocks with larger magnitudes occurred before the Mw 9.0 earthquake would have more significant influence on the gravity recordings and the seismic-wave induced component should be removed during the analysis of anomalies prior to a great earthquake in future studies.

  3. Formalizing the Safety of Java, the Java Virtual Machine and Java Card

    NARCIS (Netherlands)

    Hartel, Pieter H.; Moreau, Luc

    2001-01-01

    We review the existing literature on Java safety, emphasizing formal approaches, and the impact of Java safety on small footprint devices such as smart cards. The conclusion is that while a lot of good work has been done, a more concerted effort is needed to build a coherent set of machine readable

  4. Pro Java ME Apps

    CERN Document Server

    Iliescu, Ovidiu

    2011-01-01

    Pro Java ME Apps gives you, the developer, the know-how required for writing sophisticated Java ME applications and for taking advantage of this huge potential market. Java ME is the largest mobile software platform in the world, supported by over 80% of all phones. You'll cover what Java ME is and how it compares to other mobile software platforms, how to properly design and structure Java ME applications, how to think like an experienced Java ME developer, what common problems and pitfalls you may run into, how to optimize your code, and many other key topics. Unlike other Java ME books out

  5. Some measurements of Java-to-bytecode compiler performance in the Java Virtual Machine

    OpenAIRE

    Daly, Charles; Horgan, Jane; Power, James; Waldron, John

    2001-01-01

    In this paper we present a platform independent analysis of the dynamic profiles of Java programs when executing on the Java Virtual Machine. The Java programs selected are taken from the Java Grande Forum benchmark suite, and five different Java-to-bytecode compilers are analysed. The results presented describe the dynamic instruction usage frequencies.

  6. Ivor Horton's Beginning Java

    CERN Document Server

    Horton, Ivor

    2011-01-01

    Find out why thousands have turned to Ivor Horton for learning Java Ivor Horton's approach is teaching Java is so effective and popular that he is one of the leading authors of introductory programming tutorials, with over 160,000 copies of his Java books sold. In this latest edition, whether you're a beginner or an experienced programmer switching to Java, you'll learn how to build real-world Java applications using Java SE 7. The author thoroughly covers the basics as well as new features such as extensions and classes; extended coverage of the Swing Application Framework; and he does it all

  7. Using regional moment tensors to constrain the kinematics and stress evolution of the 2010–2013 Canterbury earthquake sequence, South Island, New Zealand

    Science.gov (United States)

    Herman, Matthew W.; Herrmann, Robert B.; Benz, Harley M.; Furlong, Kevin P.

    2014-01-01

    On September 3, 2010, a MW 7.0 (U.S. Geological Survey moment magnitude) earthquake ruptured across the Canterbury Plains in South Island, New Zealand. Since then, New Zealand GNS Science has recorded over 10,000 aftershocks ML 2.0 and larger, including three destructive ~ MW 6.0 earthquakes near Christchurch. We treat the Canterbury earthquake sequence as an intraplate earthquake sequence, and compare its kinematics to an Andersonian model for fault slip in a uniform stress field. We determined moment magnitudes and double couple solutions for 150 earthquakes having MW 3.7 and larger through the use of a waveform inversion technique using data from broadband seismic stations on South Island, New Zealand. The majority (126) of these double couple solutions have strike-slip focal mechanisms, with right-lateral slip on ENE fault planes or equivalently left-lateral slip on SSE fault planes. The remaining focal mechanisms indicate reverse faulting, except for two normal faulting events. The strike-slip segments have compatible orientations for slip in a stress field with a horizontal σ1 oriented ~ N115°E, and horizontal σ3. The preference for right lateral strike-slip earthquakes suggests that these structures are inherited from previous stages of deformation. Reverse slip is interpreted to have occurred on previously existing structures in regions with an absence of existing structures optimally oriented for strike-slip deformation. Despite the variations in slip direction and faulting style, most aftershocks had nearly the same P-axis orientation, consistent with the regional σ1. There is no evidence for significant changes in these stress orientations throughout the Canterbury earthquake sequence.

  8. Java servlet programming

    CERN Document Server

    Hunter, Jason

    2001-01-01

    Servlets are an exciting and important technology that ties Java to the Web, allowing programmers to write Java programs that create dynamic web content. Java Servlet Programming covers everything Java developers need to know to write effective servlets. It explains the servlet lifecycle, showing how to use servlets to maintain state information effortlessly. It also describes how to serve dynamic web content, including both HTML pages and multimedia data, and explores more advanced topics like integrated session tracking, efficient database connectivity using JDBC, applet-servlet communicat

  9. Java 8 recipes

    CERN Document Server

    Dea, Carl; Guime, Freddy; OConner, John; Juneau, Josh

    2014-01-01

    Java 8 Recipes offers solutions to common programming problems encountered while developing Java-based applications. Fully updated with the newest features and techniques available, Java 8 Recipes provides code examples involving Lambdas, embedded scripting with Nashorn, the new date-time API, stream support, functional interfaces, and much more. Especial emphasis is given to features such as lambdas that are newly introduced in Java 8. Content is presented in the popular problem-solution format: Look up the programming problem that you want to solve. Read the solution. Apply the solution dir

  10. JavaScript Patterns

    CERN Document Server

    Stefanov, Stoyan

    2010-01-01

    What's the best approach for developing an application with JavaScript? This book helps you answer that question with numerous JavaScript coding patterns and best practices. If you're an experienced developer looking to solve problems related to objects, functions, inheritance, and other language-specific categories, the abstractions and code templates in this guide are ideal -- whether you're writing a client-side, server-side, or desktop application with JavaScript. Written by JavaScript expert Stoyan Stefanov -- Senior Yahoo! Technical and architect of YSlow 2.0, the web page performance

  11. The 1985 central chile earthquake: a repeat of previous great earthquakes in the region?

    Science.gov (United States)

    Comte, D; Eisenberg, A; Lorca, E; Pardo, M; Ponce, L; Saragoni, R; Singh, S K; Suárez, G

    1986-07-25

    A great earthquake (surface-wave magnitude, 7.8) occurred along the coast of central Chile on 3 March 1985, causing heavy damage to coastal towns. Intense foreshock activity near the epicenter of the main shock occurred for 11 days before the earthquake. The aftershocks of the 1985 earthquake define a rupture area of 170 by 110 square kilometers. The earthquake was forecast on the basis of the nearly constant repeat time (83 +/- 9 years) of great earthquakes in this region. An analysis of previous earthquakes suggests that the rupture lengths of great shocks in the region vary by a factor of about 3. The nearly constant repeat time and variable rupture lengths cannot be reconciled with time- or slip-predictable models of earthquake recurrence. The great earthquakes in the region seem to involve a variable rupture mode and yet, for unknown reasons, remain periodic. Historical data suggest that the region south of the 1985 rupture zone should now be considered a gap of high seismic potential that may rupture in a great earthquake in the next few tens of years.

  12. Java Application Shell: A Framework for Piecing Together Java Applications

    Science.gov (United States)

    Miller, Philip; Powers, Edward I. (Technical Monitor)

    2001-01-01

    This session describes the architecture of Java Application Shell (JAS), a Swing-based framework for developing interactive Java applications. Java Application Shell is being developed by Commerce One, Inc. for NASA Goddard Space Flight Center Code 588. The purpose of JAS is to provide a framework for the development of Java applications, providing features that enable the development process to be more efficient, consistent and flexible. Fundamentally, JAS is based upon an architecture where an application is considered a collection of 'plugins'. In turn, a plug-in is a collection of Swing actions defined using XML and packaged in a jar file. Plug-ins may be local to the host platform or remotely-accessible through HTTP. Local and remote plugins are automatically discovered by JAS upon application startup; plugins may also be loaded dynamically without having to re-start the application. Using Extensible Markup Language (XML) to define actions, as opposed to hardcoding them in application logic, allows easier customization of application-specific operations by separating application logic from presentation. Through XML, a developer defines an action that may appear on any number of menus, toolbars, and buttons. Actions maintain and propagate enable/disable states and specify icons, tool-tips, titles, etc. Furthermore, JAS allows actions to be implemented using various scripting languages through the use of IBM's Bean Scripting Framework. Scripted action implementation is seamless to the end-user. In addition to action implementation, scripts may be used for application and unit-level testing. In the case of application-level testing, JAS has hooks to assist a script in simulating end-user input. JAS also provides property and user preference management, JavaHelp, Undo/Redo, Multi-Document Interface, Single-Document Interface, printing, and logging. Finally, Jini technology has also been included into the framework by means of a Jini services browser and the

  13. Java RMI

    CERN Document Server

    Grosso, William

    2002-01-01

    Java RMI contains a wealth of experience in designing and implementing Java's Remote Method Invocation. If you're a novice reader, you will quickly be brought up to speed on why RMI is such a powerful yet easy to use tool for distributed programming, while experts can gain valuable experience for constructing their own enterprise and distributed systems. With Java RMI, you'll learn tips and tricks for making your RMI code excel. The book also provides strategies for working with serialization, threading, the RMI registry, sockets and socket factories, activation, dynamic class downloading,

  14. The Java Legacy Interface

    DEFF Research Database (Denmark)

    Korsholm, Stephan

    2007-01-01

    The Java Legacy Interface is designed to use Java for encapsulating native legacy code on small embedded platforms. We discuss why existing technologies for encapsulating legacy code (JNI) is not sufficient for an important range of small embedded platforms, and we show how the Java Legacy...... Interface offers this previously missing functionality. We describe an implementation of the Java Legacy Interface for a particular virtual machine, and how we have used this virtual machine to integrate Java with an existing, commercial, soft real-time, C/C++ legacy platform....

  15. Java development in MDSplus

    International Nuclear Information System (INIS)

    Barana, O.; Luchetta, A.; Manduchi, G.; Taliercio, C.

    2002-01-01

    This paper describes the new Java components of MDSplus. These tools represent the evolution of some MDSplus components (MDSplus Current Developments and Future Directions, this conference) previously written in C, taking advantage from the multiplatform interoperability provided by the Java framework. The use of Java in the development of these tools provided an impressive reduction in the coding and test time. This is mainly due to the large set of ready-to-use components of the Java framework, and to the effective code re-use which can be achieved in the organization of Java applications

  16. Model Checking Real Time Java Using Java PathFinder

    Science.gov (United States)

    Lindstrom, Gary; Mehlitz, Peter C.; Visser, Willem

    2005-01-01

    The Real Time Specification for Java (RTSJ) is an augmentation of Java for real time applications of various degrees of hardness. The central features of RTSJ are real time threads; user defined schedulers; asynchronous events, handlers, and control transfers; a priority inheritance based default scheduler; non-heap memory areas such as immortal and scoped, and non-heap real time threads whose execution is not impeded by garbage collection. The Robust Software Systems group at NASA Ames Research Center has JAVA PATHFINDER (JPF) under development, a Java model checker. JPF at its core is a state exploring JVM which can examine alternative paths in a Java program (e.g., via backtracking) by trying all nondeterministic choices, including thread scheduling order. This paper describes our implementation of an RTSJ profile (subset) in JPF, including requirements, design decisions, and current implementation status. Two examples are analyzed: jobs on a multiprogramming operating system, and a complex resource contention example involving autonomous vehicles crossing an intersection. The utility of JPF in finding logic and timing errors is illustrated, and the remaining challenges in supporting all of RTSJ are assessed.

  17. Stress triggering of the Lushan M7. 0 earthquake by the Wenchuan Ms8. 0 earthquake

    Directory of Open Access Journals (Sweden)

    Wu Jianchao

    2013-08-01

    Full Text Available The Wenchuan Ms8. 0 earthquake and the Lushan M7. 0 earthquake occurred in the north and south segments of the Longmenshan nappe tectonic belt, respectively. Based on the focal mechanism and finite fault model of the Wenchuan Ms8. 0 earthquake, we calculated the coulomb failure stress change. The inverted coulomb stress changes based on the Nishimura and Chenji models both show that the Lushan M7. 0 earthquake occurred in the increased area of coulomb failure stress induced by the Wenchuan Ms8. 0 earthquake. The coulomb failure stress increased by approximately 0. 135 – 0. 152 bar in the source of the Lushan M7. 0 earthquake, which is far more than the stress triggering threshold. Therefore, the Lushan M7. 0 earthquake was most likely triggered by the coulomb failure stress change.

  18. An evaluation of safety-critical Java on a Java processor

    OpenAIRE

    Rios Rivas, Juan Ricardo; Schoeberl, Martin

    2014-01-01

    The safety-critical Java (SCJ) specification provides a restricted set of the Java language intended for applications that require certification. In order to test the specification, implementations are emerging and the need to evaluate those implementations in a systematic way is becoming important. In this paper we evaluate our SCJ implementation which is based on the Java Optimized Processor JOP and we measure different performance and timeliness criteria relevant to hard real-time systems....

  19. Java The Good Parts

    CERN Document Server

    Waldo, Jim

    2010-01-01

    What if you could condense Java down to its very best features and build better applications with that simpler version? In this book, veteran Sun Labs engineer Jim Waldo reveals which parts of Java are most useful, and why those features make Java among the best programming languages available. Every language eventually builds up crud, Java included. The core language has become increasingly large and complex, and the libraries associated with it have grown even more. Learn how to take advantage of Java's best features by working with an example application throughout the book. You may not l

  20. Java EE 7 first look

    CERN Document Server

    Fabrice, Armel

    2013-01-01

    An easy-to-follow guide to reveal the new features of Java EE 7 and how to efficiently utilize them.Given the main objectives pursued, this book targets three groups of people with a knowledge of the Java language. They are:Beginners in the Java EE platform who would like to have an idea about the main specifications of Java EE 7.Developers who have experimented with previous versions of Java EE and who would like to explore the new features of Java EE 7.Building architects who want to learn how to put together the various Java EE 7 specifications for building robust and secure enterprise appl

  1. Java Swing

    CERN Document Server

    Loy, Marc; Eckstein, Robert; Elliott, James; Wood, Dave

    2003-01-01

    Swing is a fully-featured user interface development kit for Java applications. Building on the foundations of the Abstract Window Toolkit (AWT), Swing enables cross-platform applications to use any of several pluggable look-and-feels. Swing developers can take advantage of its rich, flexible features and modular components, building elegant user interfaces with very little code. This second edition of Java Swing thoroughly covers all the features available in Java 2 SDK 1.3 and 1.4. More than simply a reference, this new edition takes a practical approach. It is a book by developers for

  2. Java Persistence Dengan JBoss Seam

    OpenAIRE

    Utomo, Wiranto Herry; Istiyanto, Jazi Eko

    2009-01-01

    Seam is based on Java EE, so it satisfies its framework duties in two fundamental ways: 1) Seam  simplifies Java EE: Seam provides a number of  shortcuts and  simplifications  to  the standard  Java EE  framework, making  it  even  easier  to  effectively  use  Java EE web  and business components, 2) Seam extends Java EE: Seam integrates a number of new concepts and tools into the Java EE framework. These extensions b...

  3. Poisson's ratio analysis (Vp/Vs) on volcanoes and geothermal potential areas in Central Java using tomography travel time method of grid search relocation hypocenter

    International Nuclear Information System (INIS)

    Raharjo, W.; Palupi, I. R.; Nurdian, S. W.; Giamboro, W. S.; Soesilo, J.

    2016-01-01

    Poisson's Ratio illustrates the elasticity properties of a rock. The value is affected by the ratio between the value of P and S wave velocity, where the high value ratio associated with partial melting while the low associated with gas saturated rock. Java which has many volcanoes as a result of the collision between the Australian and Eurasian plates also effects of earthquakes that result the P and S wave. By tomography techniques the distribution of the value of Poisson's ratio can be known. Western Java was dominated by high Poisson's Ratio until Mount Slamet and Dieng in Central Java, while the eastern part of Java is dominated by low Poisson's Ratio. The difference of Poisson's Ratio is located in Central Java that is also supported by the difference characteristic of hot water manifestation in geothermal potential area in the west and east of Central Java Province. Poisson's ratio value is also lower with increasing depth proving that the cold oceanic plate entrance under the continental plate. (paper)

  4. Earthquake response of storey building in Jakarta using accelerographs data analysis

    International Nuclear Information System (INIS)

    Julius, Admiral Musa; Sunardi, Bambang

    2015-01-01

    As seismotectonic, the Jakarta city will be greatly affected by the earthquake which originated from the subduction zone of the Sunda Strait and south of Java. Some occurrences of earthquakes in these location are often perceived by the occupants in the upper floors of multi-storey buildings in Jakarta but was not perceived by the occupants on the ground floor. The case shows the difference in ground-motion parameters on each floor height. The analysis of the earthquake data recorded by accelerographs on different floors need to be done to know the differences in ground-motion parameters. Data used in this research is accelerograph data installed on several floors in the main building of Meteorology Climatology and Geophysics Agency with a case study of Kebumen earthquake on January 25 th 2014. Parameters analyzed include the Peak Ground Acceleration (PGA), Peak Ground Displacement (PGD), Peak Spectral Acceleration (PSA), Amplification (Ag), and the Effective Duration of earthquake (t e ). Research stages include accelerographs data acquisition in three (3) different floors, conversion and data partition for each component, conversion to units of acceleration, determination of PGA, PGD, PSA, Ag and t e as well as data analysis. The study shows the value of PGA on the ground floor, 7 th floor and 15 th floors, respectively are 0.016 g, 0.053 g and 0.116 g. PGD on the ground floor, 7 th floor and 15 th floor respectively are 2.15 cm, 2.98 cm and 4.92 cm. PSA on the ground floor, 7 th floor and 15 th floor respectively are 0.067 g, 0.308 g and 0.836 g. Amplification of the peak acceleration value on the ground floor, 7 th floor and 15 th floor to the surface rock are 4.37, 6.07 and 7.30. Effective duration of the earthquake on the ground floor, 7 th floor and 15 th floor respectively are 222.28 s, 202.28 s and 91.58 s. In general, with increasing floor of the building, the value of the peak ground acceleration, peak ground displacement, peak spectral

  5. Earthquake response of storey building in Jakarta using accelerographs data analysis

    Energy Technology Data Exchange (ETDEWEB)

    Julius, Admiral Musa, E-mail: admiralmusajulius@yahoo.com [Study Program of Geophysics, Indonesia State College of Meteorology Climatology and Geophysics (STMKG), Jl. Perhubungan 1 No. 5, Bintaro 15221 (Indonesia); Jakarta Geophysics Observatory, Indonesia Agency of Meteorology Climatology and Geophysics (BMKG), Jl. Angkasa 1 No. 2, Kemayoran, Jakarta 10720 (Indonesia); Sunardi, Bambang, E-mail: b.sunardi@gmail.com [Research and Development Center, Indonesia Agency of Meteorology Climatology and Geophysics (BMKG), Jl. Angkasa 1 No. 2, Kemayoran, Jakarta 10720 (Indonesia)

    2015-04-24

    As seismotectonic, the Jakarta city will be greatly affected by the earthquake which originated from the subduction zone of the Sunda Strait and south of Java. Some occurrences of earthquakes in these location are often perceived by the occupants in the upper floors of multi-storey buildings in Jakarta but was not perceived by the occupants on the ground floor. The case shows the difference in ground-motion parameters on each floor height. The analysis of the earthquake data recorded by accelerographs on different floors need to be done to know the differences in ground-motion parameters. Data used in this research is accelerograph data installed on several floors in the main building of Meteorology Climatology and Geophysics Agency with a case study of Kebumen earthquake on January 25{sup th} 2014. Parameters analyzed include the Peak Ground Acceleration (PGA), Peak Ground Displacement (PGD), Peak Spectral Acceleration (PSA), Amplification (Ag), and the Effective Duration of earthquake (t{sub e}). Research stages include accelerographs data acquisition in three (3) different floors, conversion and data partition for each component, conversion to units of acceleration, determination of PGA, PGD, PSA, Ag and t{sub e} as well as data analysis. The study shows the value of PGA on the ground floor, 7{sup th} floor and 15{sup th} floors, respectively are 0.016 g, 0.053 g and 0.116 g. PGD on the ground floor, 7{sup th} floor and 15{sup th} floor respectively are 2.15 cm, 2.98 cm and 4.92 cm. PSA on the ground floor, 7{sup th} floor and 15{sup th} floor respectively are 0.067 g, 0.308 g and 0.836 g. Amplification of the peak acceleration value on the ground floor, 7{sup th} floor and 15{sup th} floor to the surface rock are 4.37, 6.07 and 7.30. Effective duration of the earthquake on the ground floor, 7{sup th} floor and 15{sup th} floor respectively are 222.28 s, 202.28 s and 91.58 s. In general, with increasing floor of the building, the value of the

  6. Neogene subduction beneath Java, Indonesia: Slab tearing and changes in magmatism

    Science.gov (United States)

    Cottam, Michael; Hall, Robert; Cross, Lanu; Clements, Benjamin; Spakman, Wim

    2010-05-01

    Java is a Neogene calc-alkaline volcanic island arc formed by the northwards subduction of the Indo-Australian Plate beneath Sundaland, the continental core of SE Asia. The island has a complex history of volcanism and displays unusual subduction characteristics. These characteristics are consistent with the subduction of a hole in the down going slab that was formed by the arrival of a buoyant oceanic plateau at the trench. Subduction beneath Java began in the Eocene. However, the position and character of the calc-alkaline arc has changed over time. An older Paleogene arc ceased activity in the Early Miocene. Volcanic activity resumed in the Late Miocene producing a younger arc to the north of the older arc, and continues to the present day. An episode of Late Miocene thrusting at about 7 Ma is observed throughout Java and appears to be linked to northward movement of the arc. Arc rocks display typical calc-alkaline characteristics and reflect melting of the mantle wedge and subducted sediments associated with high fluid fluxes. Between West Java and Bali the present arc-trench gap is unusually wide at about 300 km. Seismicity identifies subducted Indian Ocean lithosphere that dips north at about 20° between the trench and the arc and then dips more steeply at about 60-70° from 100 to 600 km depth. In East Java there is gap in seismicity between about 250 and 500 km. Seismic tomography shows that this gap is not an aseismic section of the subduction zone but a hole in the slab. East Java is also unusual in the presence of K-rich volcanoes, now inactive, to the north of the calc-alkaline volcanoes of the active arc. In contrast to the calc-alkaline volcanism of the main arc, these K-rich melts imply lower fluid fluxes and a different mantle source. We suggest that all these observations can be explained by the tearing of the subducting slab when a buoyant oceanic plateau arrived at the trench south of East Java at about 8 Ma. With the slab unable to subduct

  7. JavaScript programmer's reference

    CERN Document Server

    Valentine, Thomas

    2013-01-01

    JavaScript Programmer's Reference is an invaluable resource that won't stray far from your desktop (or your tablet!). It contains detailed information on every JavaScript object and command, and combines that reference with practical examples showcasing how you can use those commands in the real world. Whether you're just checking the syntax of a method or you're starting out on the road to JavaScript mastery, the JavaScript Programmer's Reference will be an essential aid.  With a detailed and informative tutorial section giving you the ins and outs of programming with JavaScript and the DOM f

  8. Learning JavaScript

    CERN Document Server

    Powers, Shelley

    2008-01-01

    Packed with best practices and examples of JavaScript use, Learning JavaScript provides complete, no-nonsense coverage of this quirky yet essential language for web development. You'll learn everything from primitive data types to complex features, including JavaScript elements involved with Ajax and dynamic page effects. By the end of the book, you'll be able to work with even the most sophisticated libraries and web applications.

  9. Hardware Support for Embedded Java

    DEFF Research Database (Denmark)

    Schoeberl, Martin

    2012-01-01

    The general Java runtime environment is resource hungry and unfriendly for real-time systems. To reduce the resource consumption of Java in embedded systems, direct hardware support of the language is a valuable option. Furthermore, an implementation of the Java virtual machine in hardware enables...... worst-case execution time analysis of Java programs. This chapter gives an overview of current approaches to hardware support for embedded and real-time Java....

  10. JavaScript for Absolute Beginners

    CERN Document Server

    McNavage, T

    2010-01-01

    If you are new to both JavaScript and programming, this hands-on book is for you. Rather than staring blankly at gobbledygook, you'll explore JavaScript by entering and running hundreds of code samples in Firebug, a free JavaScript debugger. Then in the last two chapters, you'll leave the safety of Firebug and hand-code an uber cool JavaScript application in your preferred text editor. Written in a friendly, engaging narrative style, this innovative JavaScript tutorial covers the following essentials: * Core JavaScript syntax, such as value types, operators, expressions, and statements provide

  11. Monitoring Java Programs with Java PathExplorer

    Science.gov (United States)

    Havelund, Klaus; Rosu, Grigore; Clancy, Daniel (Technical Monitor)

    2001-01-01

    We present recent work on the development Java PathExplorer (JPAX), a tool for monitoring the execution of Java programs. JPAX can be used during program testing to gain increased information about program executions, and can potentially furthermore be applied during operation to survey safety critical systems. The tool facilitates automated instrumentation of a program's late code which will then omit events to an observer during its execution. The observer checks the events against user provided high level requirement specifications, for example temporal logic formulae, and against lower level error detection procedures, for example concurrency related such as deadlock and data race algorithms. High level requirement specifications together with their underlying logics are defined in the Maude rewriting logic, and then can either be directly checked using the Maude rewriting engine, or be first translated to efficient data structures and then checked in Java.

  12. Model Checking JAVA Programs Using Java Pathfinder

    Science.gov (United States)

    Havelund, Klaus; Pressburger, Thomas

    2000-01-01

    This paper describes a translator called JAVA PATHFINDER from JAVA to PROMELA, the "programming language" of the SPIN model checker. The purpose is to establish a framework for verification and debugging of JAVA programs based on model checking. This work should be seen in a broader attempt to make formal methods applicable "in the loop" of programming within NASA's areas such as space, aviation, and robotics. Our main goal is to create automated formal methods such that programmers themselves can apply these in their daily work (in the loop) without the need for specialists to manually reformulate a program into a different notation in order to analyze the program. This work is a continuation of an effort to formally verify, using SPIN, a multi-threaded operating system programmed in Lisp for the Deep-Space 1 spacecraft, and of previous work in applying existing model checkers and theorem provers to real applications.

  13. An evaluation of safety-critical Java on a Java processor

    DEFF Research Database (Denmark)

    Rios Rivas, Juan Ricardo; Schoeberl, Martin

    2014-01-01

    The safety-critical Java (SCJ) specification provides a restricted set of the Java language intended for applications that require certification. In order to test the specification, implementations are emerging and the need to evaluate those implementations in a systematic way is becoming important....... In this paper we evaluate our SCJ implementation which is based on the Java Optimized Processor JOP and we measure different performance and timeliness criteria relevant to hard real-time systems. Our implementation targets Level 0 and Level1 of the specification and to test it we use a series of micro...

  14. The large 1956 earthquake in the South Aegean: Macroseismic field configuration, faulting, and neotectonics of Amorgos Island

    Science.gov (United States)

    Papadopoulos, Gerassimos A.; Pavlides, Spyros B.

    1992-10-01

    New field observations of the seismic intensity distribution of the large (M s = 7.4) South Aegean (Amorgos) earthquake of 9 July 1956 are presented. Interpretations based on local ground conditions, structural properties of buildings and peculiarities of the rupture process lead to a re-evaluation of the macroseismic field configuration. This, together with the aftershock epicentral distribution, quite well defines the earthquake rupture zone, which trends NE-SW and coincides with the Amorgos Astypalea trough. The lateral extent of the rupture zone, however, is about 40% smaller than that predicted for Aegean earthquakes of M s = 7.4. This discrepancy could be attributed to sea-bottom topography changes, which seem to control the rupture terminations, and to relatively high stressdrop with respect to other Aegean earthquakes. Fault plane solutions obtained by several authors indicate either mainly normal faulting with a significant right-lateral strike-slip component or predominantly strike-slip motion. The neotectonism of Amorgos Island, based on new field observations, aerial photograph analysis and fault mechanisms, is consistent with the dip-slip interpretation. The neotectonic master fault of Amorgos and the 1956 seismic faulting appear to belong to the same tectonic phase (NE-SW strike and a southeasterly dip). However, the significant right-lateral strike-slip component supports the idea that the Amorgos region deviates from the simple description for pure extension in back-arc conditions.

  15. Scala for Java developers

    CERN Document Server

    Alexandre, Thomas

    2014-01-01

    This step-by-step guide is full of easy-to-follow code taken from real-world examples explaining the migration and integration of Scala in a Java project. If you are a Java developer or a Java architect, working in Java EE-based solutions and want to start using Scala in your daily programming, this book is ideal for you. This book will get you up and running quickly by adopting a pragmatic approach with real-world code samples. No prior knowledge of Scala is required.

  16. Reusable libraries for safety-critical Java

    DEFF Research Database (Denmark)

    Rios Rivas, Juan Ricardo; Schoeberl, Martin

    2014-01-01

    The large collection of Java class libraries is a main factor of the success of Java. However, these libraries assume that a garbage-collected heap is used. Safety-critical Java uses scope-based memory areas instead of a garbage-collected heap. Therefore, the Java class libraries are problematic...... to use in safety-critical Java. We have identified common programming patterns in the Java class libraries that make them unsuitable for safety-critical Java. We propose ways to improve the libraries to avoid the impact of the identified problematic patterns. We illustrate these changes by implementing...

  17. Beginning Java' and Flex Migrating Java, Spring, Hibernate and Maven Developers to Adobe Flex

    CERN Document Server

    di Pisa, F

    2009-01-01

    Over the past few years, the now open source Adobe Flex Framework has been adopted by the Java community as the preferred framework for Java RIAs using Flash for the presentation layer. Flex helps Java developers to build and maintain expressive web/desktop applications that deploy consistently on all major browsers, desktops, and operating systems. Beginning Java and Flex describes new, simpler, and faster ways to develop enterprise RIAs. This book is not only for Java or Flex developers, but also for all web developers who want to increase their productivity and the quality of their developm

  18. Unusual downhole and surface free-field records near the Carquinez Strait bridges during the 24 August 2014 Mw6.0 South Napa, California earthquake

    Science.gov (United States)

    Çelebi, Mehmet; Ghahari, S. Farid; Taciroglu, Ertugrul

    2015-01-01

    This paper reports the results of Part A of a study of the recorded strong-motion accelerations at the well-instrumented network of the two side-by-side parallel bridges over the Carquinez Strait during the 24 August 2014 (Mw6.0 ) South Napa, Calif. earthquake that occurred at 03:20:44 PDT with epicentral coordinates 38.22N, 122.31W. (http://earthquake.usgs.gov/earthquakes/eqarchives/poster/2014/20140824.php, last accessed on October 17, 2014). Both bridges and two boreholes were instrumented by the California Strong motion Instrumentation Program (CSMIP) of California Geological Survey (CGS) (Shakal et al., 2014). A comprehensive comparison of several ground motion prediction equations as they relate to recorded ground motions of the earthquake is provided by Baltay and Boatright (2015).

  19. Anisotropic full waveform ambient noise and earthquake tomography of the Ontong Java Plateau and surrounding Pacific upper mantle

    Science.gov (United States)

    Hirsch, A. C.; Savage, B.; Shen, Y.

    2017-12-01

    The Ontong Java (OJP) and Manihiki plateau (MP) large igneous provinces (LIP) of the Southwest Pacific took shape from a complicated, but poorly understood geological history. Unraveling the formation and deformation of these Pacific LIPs is not straightforward due to limited available data, remote location, and atypical geology. Origin hypotheses include melting of a plume or a fast-spreading triple junction, but distinguishing between these requires a further understanding of 120 Ma of deformation of each LIP. A previous tomographic model of OJP observed highly abnormal Rayleigh shear wave speeds, >4.75km/s, and attributed these to an unusual composition, garnet and clinopyroxene residual from melting pyroxenite entrained within a rising plume. Unfortunately, this model lacks constraints on the horizontally polarized shear wave speeds, SH or Love waves, anisotropy, and attenuation. We therefore perform a transverse-isotropic, scattering-integral, full-waveform tomography between periods of 25 and 200 seconds utilizing both ambient noise empirical Green's functions and seismic data from regional earthquakes. Our tomographic model improves upon previous work using permanent and temporary seismic stations, increased model space, and utilizing three components of seismic data (vertical, radial, and tangential). Included is also an assessment of the anelastic attenuation in the western Pacific using both surface waves and multiple core reflections. Our results will improve the tomographic resolution around OJP and the Pacific upper mantle between 35 and 300 km depth. This improved model will enhance our understanding of the tectonic history of the OJP and MP regions, and the Pacific Indo-Australian plate boundary.

  20. Schedulability Analysis for Java Finalizers

    DEFF Research Database (Denmark)

    Bøgholm, Thomas; Hansen, Rene Rydhof; Søndergaard, Hans

    2010-01-01

    Java finalizers perform clean-up and finalisation of objects at garbage collection time. In real-time Java profiles the use of finalizers is either discouraged (RTSJ, Ravenscar Java) or even disallowed (JSR-302), mainly because of the unpredictability of finalizers and in particular their impact...... on the schedulability analysis. In this paper we show that a controlled scoped memory model results in a structured and predictable execution of finalizers, more reminiscent of C++ destructors than Java finalizers. Furthermore, we incorporate finalizers into a (conservative) schedulability analysis for Predictable Java...... programs. Finally, we extend the SARTS tool for automated schedulability analysis of Java bytecode programs to handle finalizers in a fully automated way....

  1. Coulomb Failure Stress Accumulation in Nepal After the 2015 Mw 7.8 Gorkha Earthquake: Testing Earthquake Triggering Hypothesis and Evaluating Seismic Hazards

    Science.gov (United States)

    Xiong, N.; Niu, F.

    2017-12-01

    A Mw 7.8 earthquake struck Gorkha, Nepal, on April 5, 2015, resulting in more than 8000 deaths and 3.5 million homeless. The earthquake initiated 70km west of Kathmandu and propagated eastward, rupturing an area of approximately 150km by 60km in size. However, the earthquake failed to fully rupture the locked fault beneath the Himalaya, suggesting that the region south of Kathmandu and west of the current rupture are still locked and a much more powerful earthquake might occur in future. Therefore, the seismic hazard of the unruptured region is of great concern. In this study, we investigated the Coulomb failure stress (CFS) accumulation on the unruptured fault transferred by the Gorkha earthquake and some nearby historical great earthquakes. First, we calculated the co-seismic CFS changes of the Gorkha earthquake on the nodal planes of 16 large aftershocks to quantitatively examine whether they were brought closer to failure by the mainshock. It is shown that at least 12 of the 16 aftershocks were encouraged by an increase of CFS of 0.1-3 MPa. The correspondence between the distribution of off-fault aftershocks and the increased CFS pattern also validates the applicability of the earthquake triggering hypothesis in the thrust regime of Nepal. With the validation as confidence, we calculated the co-seismic CFS change on the locked region imparted by the Gorkha earthquake and historical great earthquakes. A newly proposed ramp-flat-ramp-flat fault geometry model was employed, and the source parameters of historical earthquakes were computed with the empirical scaling relationship. A broad region south of the Kathmandu and west of the current rupture were shown to be positively stressed with CFS change roughly ranging between 0.01 and 0.5 MPa. The maximum of CFS increase (>1MPa) was found in the updip segment south of the current rupture, implying a high seismic hazard. Since the locked region may be additionally stressed by the post-seismic relaxation of the lower

  2. Regional earthquake loss estimation in the Autonomous Province of Bolzano - South Tyrol (Italy)

    Science.gov (United States)

    Huttenlau, Matthias; Winter, Benjamin

    2013-04-01

    Beside storm events geophysical events cause a majority of natural hazard losses on a global scale. However, in alpine regions with a moderate earthquake risk potential like in the study area and thereupon connected consequences on the collective memory this source of risk is often neglected in contrast to gravitational and hydrological hazards processes. In this context, the comparative analysis of potential disasters and emergencies on a national level in Switzerland (Katarisk study) has shown that earthquakes are the most serious source of risk in general. In order to estimate the potential losses of earthquake events for different return periods and loss dimensions of extreme events the following study was conducted in the Autonomous Province of Bolzano - South Tyrol (Italy). The applied methodology follows the generally accepted risk concept based on the risk components hazard, elements at risk and vulnerability, whereby risk is not defined holistically (direct, indirect, tangible and intangible) but with the risk category losses on buildings and inventory as a general risk proxy. The hazard analysis is based on a regional macroseismic scenario approach. Thereby, the settlement centre of each community (116 communities) is defined as potential epicentre. For each epicentre four different epicentral scenarios (return periods of 98, 475, 975 and 2475 years) are calculated based on the simple but approved and generally accepted attenuation law according to Sponheuer (1960). The relevant input parameters to calculate the epicentral scenarios are (i) the macroseismic intensity and (ii) the focal depth. The considered macroseismic intensities are based on a probabilistic seismic hazard analysis (PSHA) of the Italian earthquake catalogue on a community level (Dipartimento della Protezione Civile). The relevant focal depth are considered as a mean within a defined buffer of the focal depths of the harmonized earthquake catalogues of Italy and Switzerland as well as

  3. BPEL and Java cookbook

    CERN Document Server

    Laznik, Jurij

    2013-01-01

    The book is written in a Cookbook format with practical recipes aimed at helping you extend BPEL capabilities with Java.This book is aimed at Java developers who use BPEL programming to develop web services in SOA development. It is assumed that the readers are experienced with Java programming and SOA, but knowledge of BPEL is not necessarily required.

  4. Analysis of variables affecting unemployment rate and detecting for cluster in West Java, Central Java, and East Java in 2012

    Science.gov (United States)

    Samuel, Putra A.; Widyaningsih, Yekti; Lestari, Dian

    2016-02-01

    The objective of this study is modeling the Unemployment Rate (UR) in West Java, Central Java, and East Java, with rate of disease, infant mortality rate, educational level, population size, proportion of married people, and GDRP as the explanatory variables. Spatial factors are also considered in the modeling since the closer the distance, the higher the correlation. This study uses the secondary data from BPS (Badan Pusat Statistik). The data will be analyzed using Moran I test, to obtain the information about spatial dependence, and using Spatial Autoregressive modeling to obtain the information, which variables are significant affecting UR and how great the influence of the spatial factors. The result is, variables proportion of married people, rate of disease, and population size are related significantly to UR. In all three regions, the Hotspot of unemployed will also be detected districts/cities using Spatial Scan Statistics Method. The results are 22 districts/cities as a regional group with the highest unemployed (Most likely cluster) in the study area; 2 districts/cities as a regional group with the highest unemployed in West Java; 1 district/city as a regional groups with the highest unemployed in Central Java; 15 districts/cities as a regional group with the highest unemployed in East Java.

  5. A predictable Java profile

    DEFF Research Database (Denmark)

    Bøgholm, Thomas; Hansen, Rene Rydhof; Ravn, Anders Peter

    2009-01-01

    A Java profile suitable for development of high integrity embedded systems is presented. It is based on event handlers which are grouped in missions and equipped with respectively private handler memory and shared mission memory. This is a result of our previous work on developing a Java profile......, and is directly inspired by interactions with the Open Group on their on-going work on a safety critical Java profile (JSR-302). The main contribution is an arrangement of the class hierarchy such that the proposal is a generalization of Real-Time Specification for Java (RTSJ). A further contribution...

  6. Pro JavaScript with MooTools

    CERN Document Server

    Obcena, Mark Joseph

    2010-01-01

    Pro JavaScript with MooTools is unlike any other JavaScript book on the market today. While similar books focus on either JavaScript as a language of the browser or how to use JavaScript frameworks, Pro JavaScript with MooTools fills the gap between these topics and moves beyond - exploring the advanced features of JavaScript and how the MooTools framework uses these features to further improve the language itself. The book itself takes a unique three-pronged approach. It first walks you through the advanced features of JavaScript and the MooTools framework, including native augmentation and t

  7. Java Programming Language

    Science.gov (United States)

    Shaykhian, Gholam Ali

    2007-01-01

    The Java seminar covers the fundamentals of Java programming language. No prior programming experience is required for participation in the seminar. The first part of the seminar covers introductory concepts in Java programming including data types (integer, character, ..), operators, functions and constants, casts, input, output, control flow, scope, conditional statements, and arrays. Furthermore, introduction to Object-Oriented programming in Java, relationships between classes, using packages, constructors, private data and methods, final instance fields, static fields and methods, and overloading are explained. The second part of the seminar covers extending classes, inheritance hierarchies, polymorphism, dynamic binding, abstract classes, protected access. The seminar conclude by introducing interfaces, properties of interfaces, interfaces and abstract classes, interfaces and cailbacks, basics of event handling, user interface components with swing, applet basics, converting applications to applets, the applet HTML tags and attributes, exceptions and debugging.

  8. JavaScript The Definitive Guide

    CERN Document Server

    Flanagan, David

    2011-01-01

    Since 1996, JavaScript: The Definitive Guide has been the bible for JavaScript programmers-a programmer's guide and comprehensive reference to the core language and to the client-side JavaScript APIs defined by web browsers. The 6th edition covers HTML5 and ECMAScript 5. Many chapters have been completely rewritten to bring them in line with today's best web development practices. New chapters in this edition document jQuery and server side JavaScript. It's recommended for experienced programmers who want to learn the programming language of the Web, and for current JavaScript programmers wh

  9. Java programming 24-hour trainer

    CERN Document Server

    Fain, Yakov

    2015-01-01

    Quick and painless Java programming with expert multimedia instruction Java Programming 24-Hour Trainer, 2nd Edition is your complete beginner's guide to the Java programming language, with easy-to-follow lessons and supplemental exercises that help you get up and running quickly. Step-by-step instruction walks you through the basics of object-oriented programming, syntax, interfaces, and more, before building upon your skills to develop games, web apps, networks, and automations. This second edition has been updated to align with Java SE 8 and Java EE 7, and includes new information on GUI b

  10. Functional-light JavaScript balanced, pragmatic FP in JavaScript

    CERN Document Server

    Simpson, Kyle

    2017-01-01

    Functional-Light JavaScript is a balanced, pragmatic exploration of Functional Programming in JavaScript. Functional Programming (FP) is an incredibly powerful paradigm for structuring code that yields more robust, verifiable, and readable programs. If you've ever tried to learn FP but struggled with terms like "monad", mathematical concepts like category theory, or symbols like (lambda), you're not alone. Functional-Light programming distills the most vital aspects of FP—function purity, value immutability, composition, and more!—down to approachable JavaScript patterns. Rather than the all-or-nothing dogmatism often encountered in FP, this book teaches you how to improve your programs line by line.

  11. Communicating Java Threads

    NARCIS (Netherlands)

    Hilderink, G.H.; Broenink, Johannes F.; Vervoort, Wiek; Bakkers, André; Bakkers, A.

    The incorporation of multithreading in Java may be considered a significant part of the Java language, because it provides udimentary facilities for concurrent programming. However, we belief that the use of channels is a fundamental concept for concurrent programming. The channel approach as

  12. Java and Mac OS X

    CERN Document Server

    Davis, T Gene

    2010-01-01

    Learn the guidelines of integrating Java with native Mac OS X applications with this Devloper Reference book. Java is used to create nearly every type of application that exists and is one of the most required skills of employers seeking computer programmers. Java code and its libraries can be integrated with Mac OS X features, and this book shows you how to do just that. You'll learn to write Java programs on OS X and you'll even discover how to integrate them with the Cocoa APIs.: Shows how Java programs can be integrated with any Mac OS X feature, such as NSView widgets or screen savers; Re

  13. Java performance tuning

    CERN Document Server

    Shirazi, Jack

    2003-01-01

    Performance has been an important issue for Java developers ever since the first version hit the streets. Over the years, Java performance has improved dramatically, but tuning is essential to get the best results, especially for J2EE applications. You can never have code that runs too fast. Java Peformance Tuning, 2nd edition provides a comprehensive and indispensable guide to eliminating all types of performance problems. Using many real-life examples to work through the tuning process in detail, JPT shows how tricks such as minimizing object creation and replacing strings with arrays can

  14. Translating Colored Control Flow Nets into Readable Java via Annotated Java Workflow Nets

    DEFF Research Database (Denmark)

    Lassen, Kristian Bisgaard; Tjell, Simon

    2007-01-01

    In this paper, we present a method for developing Java applications from Colored Control Flow Nets (CCFNs), which is a special kind of Colored Petri Nets (CPNs) that we introduce. CCFN makes an explicit distinction between the representation of: The system, the environment of the system, and the ......In this paper, we present a method for developing Java applications from Colored Control Flow Nets (CCFNs), which is a special kind of Colored Petri Nets (CPNs) that we introduce. CCFN makes an explicit distinction between the representation of: The system, the environment of the system......, and the interface between the system and the environment. Our translation maps CCFNs into Anno- tated Java Workflow Nets (AJWNs) as an intermediate step, and these AJWNs are finally mapped to Java. CCFN is intended to enforce the modeler to describe the system in an imperative manner which makes the subsequent...... translation to Java easier to define. The translation to Java preserves data dependencies and control-flow aspects of the source CCFN. This paper contributes to the model-driven software development paradigm, by showing how to model a system, environment, and their interface, as a CCFN and presenting a fully...

  15. Earthquake Rupture at Focal Depth, Part I: Structure and Rupture of the Pretorius Fault, TauTona Mine, South Africa

    Science.gov (United States)

    Heesakkers, V.; Murphy, S.; Reches, Z.

    2011-12-01

    We analyze the structure of the Archaean Pretorius fault in TauTona mine, South Africa, as well as the rupture-zone that recently reactivated it. The analysis is part of the Natural Earthquake Laboratory in South African Mines (NELSAM) project that utilizes the access to 3.6 km depth provided by the mining operations. The Pretorius fault is a ~10 km long, oblique-strike-slip fault with displacement of up to 200 m that crosscuts fine to very coarse grain quartzitic rocks in TauTona mine. We identify here three structural zones within the fault-zone: (1) an outer damage zone, ~100 m wide, of brittle deformation manifested by multiple, widely spaced fractures and faults with slip up to 3 m; (2) an inner damage zone, 25-30 m wide, with high density of anastomosing conjugate sets of fault segments and fractures, many of which carry cataclasite zones; and (3) a dominant segment, with a cataclasite zone up to 50 cm thick that accommodated most of the Archaean slip of the Pretorius fault, and is regarded as the `principal slip zone' (PSZ). This fault-zone structure indicates that during its Archaean activity, the Pretorius fault entered the mature fault stage in which many slip events were localized along a single, PSZ. The mining operations continuously induce earthquakes, including the 2004, M2.2 event that rejuvenated the Pretorius fault in the NELSAM project area. Our analysis of the M2.2 rupture-zone shows that (1) slip occurred exclusively along four, pre-existing large, quasi-planer segments of the ancient fault-zone; (2) the slipping segments contain brittle cataclasite zones up to 0.5 m thick; (3) these segments are not parallel to each other; (4) gouge zones, 1-5 mm thick, composed of white `rock-flour' formed almost exclusively along the cataclasite-host rock contacts of the slipping segments; (5) locally, new, fresh fractures branched from the slipping segments and propagated in mixed shear-tensile mode; (6) the maximum observed shear displacement is 25 mm in

  16. Hardware Objects for Java

    DEFF Research Database (Denmark)

    Schoeberl, Martin; Thalinger, Christian; Korsholm, Stephan

    2008-01-01

    Java, as a safe and platform independent language, avoids access to low-level I/O devices or direct memory access. In standard Java, low-level I/O it not a concern; it is handled by the operating system. However, in the embedded domain resources are scarce and a Java virtual machine (JVM) without...... an underlying middleware is an attractive architecture. When running the JVM on bare metal, we need access to I/O devices from Java; therefore we investigate a safe and efficient mechanism to represent I/O devices as first class Java objects, where device registers are represented by object fields. Access...... to those registers is safe as Java’s type system regulates it. The access is also fast as it is directly performed by the bytecodes getfield and putfield. Hardware objects thus provide an object-oriented abstraction of low-level hardware devices. As a proof of concept, we have implemented hardware objects...

  17. Mastering JavaScript high performance

    CERN Document Server

    Adams, Chad R

    2015-01-01

    If you are a JavaScript developer with some experience in development and want to increase the performance of JavaScript projects by building faster web apps, then this book is for you. You should know the basic concepts of JavaScript.

  18. Tomographic imaging of Central Java, Indonesia: Preliminary result of joint inversion of the MERAMEX and MCGA earthquake data

    International Nuclear Information System (INIS)

    Rohadi, Supriyanto; Widiyantoro, Sri; Nugraha, Andri Dian; Masturyono

    2013-01-01

    The realization of local earthquake tomography is usually conducted by removing distant events outside the study region, because these events may increase errors. In this study, tomographic inversion has been conducted using the travel time data of local and regional events in order to improve the structural resolution, especially for deep structures. We used the local MERapi Amphibious EXperiments (MERAMEX) data catalog that consists of 292 events from May to October 2004. The additional new data of regional events in the Java region were taken from the Meteorological, Climatological, and Geophysical Agency (MCGA) of Indonesia, which consist of 882 events, having at least 10 recording phases at each seismographic station from April 2009 to February 2011. We have conducted joint inversions of the combined data sets using double-difference tomography to invert for velocity structures and to conduct hypocenter relocation simultaneously. The checkerboard test results of Vp and Vs structures demonstrate a significantly improved spatial resolution from the shallow crust down to a depth of 165 km. Our tomographic inversions reveal a low velocity anomaly beneath the Lawu - Merapi zone, which is consistent with the results from previous studies. A strong velocity anomaly zone with low Vp, low Vs and low Vp/Vs is also identified between Cilacap and Banyumas. We interpret this anomaly as a fluid content material with large aspect ratio or sediment layer. This anomaly zone is in a good agreement with the existence of a large dome containing sediment in this area as proposed by previous geological studies. A low velocity anomaly zone is also detected in Kebumen, where it may be related to the extensional oceanic basin toward the land

  19. Tomographic imaging of Central Java, Indonesia: Preliminary result of joint inversion of the MERAMEX and MCGA earthquake data

    Energy Technology Data Exchange (ETDEWEB)

    Rohadi, Supriyanto [Study Program of Earth Sciences, Faculty of Earth Sciences and Technology, Institute of Technology Bandung, Jl. Ganesha No.10, Bandung 40132, Indonesia and Meteorological, Climatological, and Geophysical Agency, Jl. Angkasa 1 No.2, Kemayoran, Jakarta (Indonesia); Widiyantoro, Sri; Nugraha, Andri Dian [Global Geophysics Research Group, Faculty of Mining and Petroleum Engineering, Institute of Technology Bandung, Jl. Ganesha No.10, Bandung 40132 (Indonesia); Masturyono [Meteorological, Climatological, and Geophysical Agency, Jl. Angkasa 1 No.2, Kemayoran, Jakarta Pusat (Indonesia)

    2013-09-09

    The realization of local earthquake tomography is usually conducted by removing distant events outside the study region, because these events may increase errors. In this study, tomographic inversion has been conducted using the travel time data of local and regional events in order to improve the structural resolution, especially for deep structures. We used the local MERapi Amphibious EXperiments (MERAMEX) data catalog that consists of 292 events from May to October 2004. The additional new data of regional events in the Java region were taken from the Meteorological, Climatological, and Geophysical Agency (MCGA) of Indonesia, which consist of 882 events, having at least 10 recording phases at each seismographic station from April 2009 to February 2011. We have conducted joint inversions of the combined data sets using double-difference tomography to invert for velocity structures and to conduct hypocenter relocation simultaneously. The checkerboard test results of Vp and Vs structures demonstrate a significantly improved spatial resolution from the shallow crust down to a depth of 165 km. Our tomographic inversions reveal a low velocity anomaly beneath the Lawu - Merapi zone, which is consistent with the results from previous studies. A strong velocity anomaly zone with low Vp, low Vs and low Vp/Vs is also identified between Cilacap and Banyumas. We interpret this anomaly as a fluid content material with large aspect ratio or sediment layer. This anomaly zone is in a good agreement with the existence of a large dome containing sediment in this area as proposed by previous geological studies. A low velocity anomaly zone is also detected in Kebumen, where it may be related to the extensional oceanic basin toward the land.

  20. Stochastic strong ground motion simulations for the intermediate-depth earthquakes of the south Aegean subduction zone

    Science.gov (United States)

    Kkallas, Harris; Papazachos, Konstantinos; Boore, David; Margaris, Vasilis

    2015-04-01

    We have employed the stochastic finite-fault modelling approach of Motazedian and Atkinson (2005), as described by Boore (2009), for the simulation of Fourier spectra of the Intermediate-depth earthquakes of the south Aegean subduction zone. The stochastic finite-fault method is a practical tool for simulating ground motions of future earthquakes which requires region-specific source, path and site characterizations as input model parameters. For this reason we have used data from both acceleration-sensor and broadband velocity-sensor instruments from intermediate-depth earthquakes with magnitude of M 4.5-6.7 that occurred in the south Aegean subduction zone. Source mechanisms for intermediate-depth events of north Aegean subduction zone are either collected from published information or are constrained using the main faulting types from Kkallas et al. (2013). The attenuation parameters for simulations were adopted from Skarladoudis et al. (2013) and are based on regression analysis of a response spectra database. The site amplification functions for each soil class were adopted from Klimis et al., (1999), while the kappa values were constrained from the analysis of the EGELADOS network data from Ventouzi et al., (2013). The investigation of stress-drop values was based on simulations performed with the EXSIM code for several ranges of stress drop values and by comparing the results with the available Fourier spectra of intermediate-depth earthquakes. Significant differences regarding the strong-motion duration, which is determined from Husid plots (Husid, 1969), have been identified between the for-arc and along-arc stations due to the effect of the low-velocity/low-Q mantle wedge on the seismic wave propagation. In order to estimate appropriate values for the duration of P-waves, we have automatically picked P-S durations on the available seismograms. For the S-wave durations we have used the part of the seismograms starting from the S-arrivals and ending at the

  1. Memory Management for Safety-Critical Java

    DEFF Research Database (Denmark)

    Schoeberl, Martin

    2011-01-01

    Safety-Critical Java (SCJ) is based on the Real-Time Specification for Java. To simplify the certification of Java programs, SCJ supports only a restricted scoped memory model. Individual threads share only immortal memory and the newly introduced mission memory. All other scoped memories...... implementation is evaluated on an embedded Java processor....

  2. Safety-critical Java for embedded systems

    DEFF Research Database (Denmark)

    Schoeberl, Martin; Dalsgaard, Andreas Engelbredt; Hansen, René Rydhof

    2016-01-01

    This paper presents the motivation for and outcomes of an engineering research project on certifiable Javafor embedded systems. The project supports the upcoming standard for safety-critical Java, which defines asubset of Java and libraries aiming for development of high criticality systems....... The outcome of this projectinclude prototype safety-critical Java implementations, a time-predictable Java processor, analysis tools formemory safety, and example applications to explore the usability of safety-critical Java for this applicationarea. The text summarizes developments and key contributions...

  3. Refactoring Real-Time Java Profiles

    DEFF Research Database (Denmark)

    Søndergaard, Hans; Thomsen, Bent; Ravn, Anders Peter

    2011-01-01

    Just like other software, Java profiles benefits from refactoring when they have been used and have evolved for some time. This paper presents a refactoring of the Real-Time Specification for Java (RTSJ) and the Safety Critical Java (SCJ) profile (JSR-302). It highlights core concepts and makes...

  4. JavaFX' Special Effects Taking Java RIA to the Extreme with Animation, Multimedia, and Game Elements

    CERN Document Server

    Jordon, L

    2009-01-01

    Enough about learning the fundamentals of the intriguing JavaFX platform; it's now time to start implementing visually stunning and dynamic Java-based rich Internet applications (RIAs) for your desktop or mobile front end. This book will show you what the JavaFX platform can really do for Java desktop and mobile front ends. It presents a number of excellent visual effects and techniques that will make any JavaFX application stand out-whether it's animation, multimedia, or a game. The techniques shown in this book are invaluable for competing in today's market, and they'll help set your RIAs ap

  5. Java problem-based learning

    Directory of Open Access Journals (Sweden)

    Goran P, Šimić

    2012-01-01

    Full Text Available The paper describes the self-directed problem-based learning system (PBL named Java PBL. The expert module is the kernel of Java PBL. It involves a specific domain model, a problem generator and a solution generator. The overall system architecture is represented in the paper. Java PBL can act as the stand-alone system, but it is also designed to provide support to learning management systems (LMSs. This is provided by a modular design of the system. An LMS can offer the declarative knowledge only. Java PBL offers the procedural knowledge and the progress of the learner programming skills. The free navigation, unlimited numbers of problems and recommendations represent the main pedagogical strategies and tactics implemented into the system.

  6. Slip in the 1857 and earlier large earthquakes along the Carrizo Plain, San Andreas Fault.

    Science.gov (United States)

    Zielke, Olaf; Arrowsmith, J Ramón; Grant Ludwig, Lisa; Akçiz, Sinan O

    2010-02-26

    The moment magnitude (Mw) 7.9 Fort Tejon earthquake of 1857, with a approximately 350-kilometer-long surface rupture, was the most recent major earthquake along the south-central San Andreas Fault, California. Based on previous measurements of its surface slip distribution, rupture along the approximately 60-kilometer-long Carrizo segment was thought to control the recurrence of 1857-like earthquakes. New high-resolution topographic data show that the average slip along the Carrizo segment during the 1857 event was 5.3 +/- 1.4 meters, eliminating the core assumption for a linkage between Carrizo segment rupture and recurrence of major earthquakes along the south-central San Andreas Fault. Earthquake slip along the Carrizo segment may recur in earthquake clusters with cumulative slip of approximately 5 meters.

  7. A Ravenscar-Java profile implementation

    DEFF Research Database (Denmark)

    Thomsen, Bent; Ravn, Anders Peter; Søndergaard, Hans

    2006-01-01

    This paper presents an implementation of the Ravenscar-Java profile. While most implementations of the profile are reference-implementations showing that it is possible to implement the profile, our implementation is aimed at industrial applications. It uses a dedicated real-time Java processor......, since we want to investigate if the Ravenscar-Java profile, implemented on a Java processor, is efficient for real applications. During the implementation some ambiguities and weaknesses of the profile were uncovered. However, test examples indicate that the profile is suitable for development...... of realistic real-time programs....

  8. Professional Java EE design patterns

    CERN Document Server

    Yener, Murat

    2014-01-01

    Master Java EE design pattern implementation to improve your design skills and your application's architecture Professional Java EE Design Patterns is the perfect companion for anyone who wants to work more effectively with Java EE, and the only resource that covers both the theory and application of design patterns in solving real-world problems. The authors guide readers through both the fundamental and advanced features of Java EE 7, presenting patterns throughout, and demonstrating how they are used in day-to-day problem solving. As the most popular programming language in community-dri

  9. Essential Java for Scientists and Engineers

    CERN Document Server

    Hahn, Brian D; Malan, Katherine M

    2003-01-01

    Essential Java serves as an introduction to the programming language, Java, for scientists and engineers, and can also be used by experienced programmers wishing to learn Java as an additional language. The book focuses on how Java, and object-oriented programming, can be used to solve science and engineering problems. Many examples are included from a number of different scientific and engineering areas, as well as from business and everyday life. Pre-written packages of code are provided to help in such areas as input/output, matrix manipulation and scientific graphing. Java source code and

  10. Spatial data analysis and integration for regional-scale geothermal potential mapping, West Java, Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Carranza, Emmanuel John M.; Barritt, Sally D. [Department of Earth Systems Analysis, International Institute for Geo-information Science and Earth Observation (ITC), Enschede (Netherlands); Wibowo, Hendro; Sumintadireja, Prihadi [Laboratory of Volcanology and Geothermal, Geology Department, Institute of Technology Bandung (ITB), Bandung (Indonesia)

    2008-06-15

    Conceptual modeling and predictive mapping of potential for geothermal resources at the regional-scale in West Java are supported by analysis of the spatial distribution of geothermal prospects and thermal springs, and their spatial associations with geologic features derived from publicly available regional-scale spatial data sets. Fry analysis shows that geothermal occurrences have regional-scale spatial distributions that are related to Quaternary volcanic centers and shallow earthquake epicenters. Spatial frequency distribution analysis shows that geothermal occurrences have strong positive spatial associations with Quaternary volcanic centers, Quaternary volcanic rocks, quasi-gravity lows, and NE-, NNW-, WNW-trending faults. These geological features, with their strong positive spatial associations with geothermal occurrences, constitute spatial recognition criteria of regional-scale geothermal potential in a study area. Application of data-driven evidential belief functions in GIS-based predictive mapping of regional-scale geothermal potential resulted in delineation of high potential zones occupying 25% of West Java, which is a substantial reduction of the search area for further exploration of geothermal resources. The predicted high potential zones delineate about 53-58% of the training geothermal areas and 94% of the validated geothermal occurrences. The results of this study demonstrate the value of regional-scale geothermal potential mapping in: (a) data-poor situations, such as West Java, and (b) regions with geotectonic environments similar to the study area. (author)

  11. Women's status and child survival in West Java, Indonesia.

    Science.gov (United States)

    Widayatun

    1991-03-01

    This study is introduced by a literature review of the concept of women's status, and related factors that determine infant and child mortality. Women's status is primarily defined by education, occupation and economic activity, which affect women's decision-making in the home and their independence in larger society. Cluster analysis was used to identify geographical patterns of standardized women's status variables among 20 regencies and 4 municipalities in West Java. Euclidian distances were computed between pairs of regencies across the 13 indicators. Pearson's correlations and multiple regression were used to compare associations between women's status variables and infant and child mortality, after controlling for economic development. Using data from the 1980 census, the study demonstrated large regional variations in women's status in West Java, with higher status in both the household and in society in the south and central highlands than in the north and west. Women's status is closely related to infant and child mortality, independent of the level of development. There was 1 notable exception, the municipality of Bogor, where infant and child mortality were higher than average rates for the cluster of areas with higher women's status. The results suggest that improved education, and increase in age at 1st marriage are key elements for improving the status of women in West Java.

  12. Three-Dimensional Finite Difference Simulation of Ground Motions from the August 24, 2014 South Napa Earthquake

    Energy Technology Data Exchange (ETDEWEB)

    Rodgers, Arthur J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Univ. of California, Berkeley, CA (United States); Dreger, Douglas S. [Univ. of California, Berkeley, CA (United States); Pitarka, Arben [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-06-15

    We performed three-dimensional (3D) anelastic ground motion simulations of the South Napa earthquake to investigate the performance of different finite rupture models and the effects of 3D structure on the observed wavefield. We considered rupture models reported by Dreger et al. (2015), Ji et al., (2015), Wei et al. (2015) and Melgar et al. (2015). We used the SW4 anelastic finite difference code developed at Lawrence Livermore National Laboratory (Petersson and Sjogreen, 2013) and distributed by the Computational Infrastructure for Geodynamics. This code can compute the seismic response for fully 3D sub-surface models, including surface topography and linear anelasticity. We use the 3D geologic/seismic model of the San Francisco Bay Area developed by the United States Geological Survey (Aagaard et al., 2008, 2010). Evaluation of earlier versions of this model indicated that the structure can reproduce main features of observed waveforms from moderate earthquakes (Rodgers et al., 2008; Kim et al., 2010). Simulations were performed for a domain covering local distances (< 25 km) and resolution providing simulated ground motions valid to 1 Hz.

  13. Study of changes in the lineament structure, caused by earthquakes in South America by applying the lineament analysis to the Aster (Terra) satellite data

    Science.gov (United States)

    Arellano-Baeza, A. A.; Zverev, A. T.; Malinnikov, V. A.

    The region between Southern Peru and Northern Chile is one of the most seismically and volcanically active regions in South America. This is caused by a constant subduction of the South American Plate, converging with the Nazca Plate in the extreme North of Chile. We used the 15 and 30 m resolution satellite images, provided by the ASTER (VNIR and SWIR) instrument onboard the Terra satellite to study changes in the geological faults close to earthquake epicenters in southern Peru. Visible and infrared spectral bands were analysed using “The Lineament Extraction and Stripes Statistic Analysis” (LESSA) software package to examine changes in the lineament features and stripe density fields caused by seismic activity. We used the satellite images 128 and 48 days before and 73 days after a 5.2 Richter scale magnitude earthquake. The fact that the seasonal variations in the South of Peru and North of Chile are very small, and the vegetation is very limited, allowed us to establish substantial changes in the lineament and the stripe density field features. We develop a methodology that allows to evaluate the seismic risk in this region for the future.

  14. Benchmarking JavaScript Frameworks

    OpenAIRE

    Mariano, Carl Lawrence

    2017-01-01

    JavaScript programming language has been in existence for many years already and is one of the most widely known, if not, the most used front-end programming language in web development. However, JavaScript is still evolving and with the emergence of JavaScript Frameworks (JSF), there has been a major change in how developers develop software nowadays. Developers these days often use more than one framework in order to fulfil their job which has given rise to the problem for developers when i...

  15. Beginning programming with Java for dummies

    CERN Document Server

    Burd, Barry

    2014-01-01

    A practical introduction to programming with Java Beginning Programming with Java For Dummies, 4th Edition is a comprehensive guide to learning one of the most popular programming languages worldwide. This book covers basic development concepts and techniques through a Java lens. You'll learn what goes into a program, how to put the pieces together, how to deal with challenges, and how to make it work. The new Fourth Edition has been updated to align with Java 8, and includes new options for the latest tools and techniques. Java is the predominant language used to program Android and cloud app

  16. Beginning Programming with Java For Dummies

    CERN Document Server

    Burd, Barry

    2012-01-01

    One of the most popular beginning programming books, now fully updated Java is a popular language for beginning programmers, and earlier editions of this fun and friendly guide have helped thousands get started. Now fully revised to cover recent updates for Java 7.0, Beginning Programming with Java For Dummies, 3rd Edition is certain to put more first-time programmers and Java beginners on the road to Java mastery.Explores what goes into creating a program, putting the pieces together, dealing with standard programming challenges, debugging, and making the program work Offers new options for

  17. JavaScript programming pushing the limits

    CERN Document Server

    Raasch, Jon

    2013-01-01

    Take your JavaScript knowledge as far as it can go JavaScript has grown up, and it's a hot topic. Newer and faster JavaScript VMs and frameworks built upon them have increased the popularity of JavaScript for server-side web applications, and rich JS applications are being developed for mobile devices. This book delivers a compelling tutorial, showing you how to build a real-world app from the ground up. Experienced developers who want to master the latest techniques and redefine their skills will find this deep dive into JavaScript's hidden functionalities gives them the tools to

  18. Professional JavaScript for Web Developers

    CERN Document Server

    Zakas, Nicholas C

    2011-01-01

    A significant update to a bestselling JavaScript book As the key scripting language for the web, JavaScript is supported by every modern web browser and allows developers to create client-side scripts that take advantage of features such as animating the canvas tag and enabling client-side storage and application caches. After an in-depth introduction to the JavaScript language, this updated edition of a bestseller progresses to break down how JavaScript is applied for web development using the latest web development technologies. Veteran author and JavaScript guru Nicholas Zakas shows how Jav

  19. Java 7 A Beginner's Tutorial

    CERN Document Server

    Kurniawan, Budi

    2011-01-01

    A Books24x7's TOP 10 title for 4 consecutive years! Java is an easy language to learn. However, you need to master more than the language syntax to be a professional Java programmer. For one, object-oriented programming (OOP) skill is key to developing robust and effective Java applications. In addition, knowing how to use the vast collection of libraries makes development more rapid. This book introduces you to important programming concepts and teaches how to use the Java core libraries. It is a guide to building real-world applications, both desktop and Web-based. The coverage is the

  20. Habitat segregation in two congeric hawk-eagles (Spizaetus bartelsi abd S. cirrhatus) in Java, Indonesia

    NARCIS (Netherlands)

    Nijman, V.

    2004-01-01

    On the island of Java, Indonesia, two congeneric hawk-eagles occur, i.e. the endemic Javan hawk-eagle Spizaetus bartelsi and the wide-ranging changeable hawk-eagle S. cirrhatus. Comparisons with similar species-pairs in South East Asia suggest that these species may be competitors both in habitat

  1. Java Processor Optimized for RTSJ

    Directory of Open Access Journals (Sweden)

    Tu Shiliang

    2007-01-01

    Full Text Available Due to the preeminent work of the real-time specification for Java (RTSJ, Java is increasingly expected to become the leading programming language in real-time systems. To provide a Java platform suitable for real-time applications, a Java processor which can execute Java bytecode is directly proposed in this paper. It provides efficient support in hardware for some mechanisms specified in the RTSJ and offers a simpler programming model through ameliorating the scoped memory of the RTSJ. The worst case execution time (WCET of the bytecodes implemented in this processor is predictable by employing the optimization method proposed in our previous work, in which all the processing interfering predictability is handled before bytecode execution. Further advantage of this method is to make the implementation of the processor simpler and suited to a low-cost FPGA chip.

  2. Static Analysis for JavaScript

    DEFF Research Database (Denmark)

    Jensen, Simon Holm

    . This dissertation describes the design and implementation of a static analysis for JavaScript that can assist programmers in finding bugs in code during development. We describe the design of a static analysis tool for JavaScript, built using the monotone framework. This analysis infers detailed type information......Web applications present unique challenges to designers of static analysis tools. One of these challenges is the language JavaScript used for client side scripting in the browser. JavaScript is a complex language with many pitfalls and poor tool support compared to other languages...... about programs. This information can be used to detect bugs such as null pointer dereferences and unintended type coercions. The analysis is sound, enabling it to prove the absence of certain program errors. JavaScript is usually run within the context of the browser and the DOM API. The major...

  3. Isolating and Restricting Client-Side JavaScript:Isoleren en beperken van JavaScript aan de cliëntzijde

    OpenAIRE

    Van Acker, Steven

    2015-01-01

    In today’s web applications, no one disputes the important role of JavaScript asa client-side programming language. JavaScript can turn the Web into a lively,dynamic and interactive end-user experience. Unfortunately, JavaScript canalso be used to steal sensitive information and abuse powerful functionality. Sloppy input validation can make a web application vulnerable, allowingmalicious JavaScript code to leak into a web application’s JavaScript executionenvironment, where it leads to un...

  4. Effects of the earthquake of March 27, 1964, on air and water transport, communications, and utilities systems in south-central Alaska: Chapter B in The Alaska earthquake, March 27, 1964: effects on transportation, communications, and utilities

    Science.gov (United States)

    Eckel, Edwin B.

    1967-01-01

    The earthquake of March 27, 1964, wrecked or severely hampered all forms of transportation, all utilities, and all communications systems over a very large part of south-central Alaska. Effects on air transportation were minor as compared to those on the water, highway, and railroad transport systems. A few planes were damaged or wrecked by seismic vibration or by flooding. Numerous airport facilities were damaged by vibration or by secondary effects of the earthquake, notably seismic sea and landslide-generated waves, tectonic subsidence, and compaction. Nearly all air facilities were partly or wholly operational within a few hours after the earthquake. The earthquake inflicted enormous damage on the shipping industry, which is indispensable to a State that imports fully 90 percent of its requirements—mostly by water—and whose largest single industry is fishing. Except for those of Anchorage, all port facilities in the earthquake-affected area were destroyed or made inoperable by submarine slides, waves, tectonic uplift, and fire. No large vessels were lost, but more than 200 smaller ones (mostly crab or salmon boats) were lost or severely damaged. Navigation aids were destroyed, and hitherto well-known waterways were greatly altered by uplift or subsidence. All these effects wrought far-reaching changes in the shipping economy of Alaska, many of them to its betterment. Virtually all utilities and communications in south-central Alaska were damaged or wrecked by the earthquake, but temporary repairs were effected in remarkably short times. Communications systems were silenced almost everywhere by loss of power or by downed lines; their place was quickly taken by a patchwork of self-powered radio transmitters. A complex power-generating system that served much of the stricken area from steam, diesel, and hydrogenerating plants was disrupted in many places by vibration damage to equipment and by broken transmission lines. Landslides in Anchorage broke gas

  5. Multi-Disaster Risk Analysis of Klaten Regency, Central Java, Indonesia

    Directory of Open Access Journals (Sweden)

    Candra Dian Lukita Tauhid

    2017-09-01

    Full Text Available Klaten Regency is located in Central Java Province, Indonesia, ranked as 19th most susceptible area in Indonesia. Among of many disasters those take place in Klaten are floods, landslides, and earthquake, which cause damages and loss of lives. Unfortunately, some areas in Klaten Regency are also very vulnerable to the disasters that often contribute severe damage and loss. This paper presents result of risk analysis due to floods, landslides and earthquake disaster at Klaten Regency. Several parameters or criteria are utilized to describe the level of the disaster intensities. The flood susceptibility parameters are the Topographic Wet Index (TWI, Normalized Difference Vegetation Index (NDVI, permeability and roughness, as proposed by Kafira, et al. (2015. The landslide susceptibility are the geology, slope, elevation, distance from fault, distance from rivers, rainfall and land use, as suggested by Thearith (2009 whereas the earthquake susceptibility was referred to FEMA P-154 by using the Ss and S1. The vulnerability and risk analysis are carried out by referring to the parameters as stipulated by the Chief Regulation of the National Board of Disaster Management No.2 Year 2012 (Perka Badan Nasional Penanggulangan Bencana- BNPB, concerning the parameters being used for the vulnerability analysis, i.e. population density, poverty ratio, land use, and level of Gross Regional Domestic Product. Further spatial analysis of the risk performs the multi-disaster risk map as a combination between the floods, landslides and earthquake disaster risk in Klaten Regency. The established multi-disaster risk map shows the risk level in the Klaten Regency, i.e., 16.31% at very low risk, 33.01% at low risk, 34.49% at medium risk, at 14.22% high risk and 1.97% at very high risk.

  6. Checking Java Programs

    CERN Document Server

    Darwin, Ian

    2007-01-01

    This Short Cut tells you about tools that will improve the quality of your Java code, using checking above and beyond what the standard tools do, including: Using javac options, JUnit and assertions Making your IDE work harder Checking your source code with PMD Checking your compiled code (.class files) with FindBugs Checking your program's run-time behavior with Java PathFinder

  7. High Performance JavaScript

    CERN Document Server

    Zakas, Nicholas

    2010-01-01

    If you're like most developers, you rely heavily on JavaScript to build interactive and quick-responding web applications. The problem is that all of those lines of JavaScript code can slow down your apps. This book reveals techniques and strategies to help you eliminate performance bottlenecks during development. You'll learn how to improve execution time, downloading, interaction with the DOM, page life cycle, and more. Yahoo! frontend engineer Nicholas C. Zakas and five other JavaScript experts -- Ross Harmes, Julien Lecomte, Steven Levithan, Stoyan Stefanov, and Matt Sweeney -- demonstra

  8. JavaScript Web Applications

    CERN Document Server

    MacCaw, Alex

    2011-01-01

    Building rich JavaScript applications that bring a desktop experience to the Web requires moving state from the server to the client side-not a simple task. This hands-on book takes proficient JavaScript developers through all the steps necessary to create state-of-the-art applications, including structure, templating, frameworks, communicating with the server, and many other issues. Throughout the book, you'll work with real-world example applications to help you grasp the concepts involved. Learn how to create JavaScript applications that offer a more responsive and improved experience. U

  9. Beginning Java- me platform

    CERN Document Server

    Rischpater, Ray

    2008-01-01

    Empowering developers with the flexibility and power to start building Java applications for their Java-enabled mobile device or cell phone, this book covers sound HTTPS support, user interface API enhancements, the Mobile Media API, the Game API, and more.

  10. Big Java late objects

    CERN Document Server

    Horstmann, Cay S

    2012-01-01

    Big Java: Late Objects is a comprehensive introduction to Java and computer programming, which focuses on the principles of programming, software engineering, and effective learning. It is designed for a two-semester first course in programming for computer science students.

  11. Pro JavaScript for web apps

    CERN Document Server

    Freeman, Adam

    2012-01-01

    JavaScript is the engine behind every web app, and a solid knowledge of it is essential for all modern web developers. Pro JavaScript for Web Apps gives you all of the information that you need to create professional, optimized, and efficient JavaScript applications that will run across all devices. It takes you through all aspects of modern JavaScript application creation, showing you how to combine JavaScript with the new features of HTML5 and CSS3 to make the most of the new web technologies. The focus of the book is on creating professional web applications, ensuring that your app provides

  12. Dating Informed Correlations and Large Earthquake Recurrence at the Hokuri Creek Paleoseismic Site, Alpine Fault, South Island, New Zealand

    Science.gov (United States)

    Biasi, G. P.; Clark, K.; Berryman, K. R.; Cochran, U. A.; Prior, C.

    2010-12-01

    The Hokuri Creek paleoseismic site on the Alpine fault in south Westland, New Zealand has yielded a remarkable history of fault activity spanning the past ~7000 years. Evidence for earthquake occurrence and timing has been developed primarily from natural exposures created after a geologically major incision event a few hundred years ago. Prior to this event, the elevation of the spillway of Hokuri Creek into its previous drainage was controlled by NE translation of a shutter ridge during earthquakes. Each event increased the base level for sediment accumulation upstream by decimetres to perhaps a metre. Each increase in base level is associated with a period of accumulation principally of clean fine silts and rock flour. With infilling and time, the wetlands reestablish and sedimentation transitions to a slower and more organic-rich phase (Clark et al., this meeting). At least 18 such cycles have been identified at the site. Carbonaceous material is abundant in almost all layers. Much of the dating is done on macrofossils - individual beech tree leaves, reeds, and similar fragile features. Reworking is considered unlikely due to the fragility of the samples. All dates were developed by the Rafter Radiocarbon Laboratory of the National Isotope Centre at GNS. Delta 13C was measured and used to correct for fractionation. Dating earthquakes at the Hokuri Creek site presents some special challenges. Individual stratigraphic sections around the site expose different time intervals. The Main Section series provides the most complete single section, with over 5000 years of represented. Nearby auxiliary exposures cover nearly 1500 years more. Date series from individual exposures tend to be internally very consistent with stratigraphic ordering, but by virtue of their spatial separation, correlations between sections are more difficult. We find, however, that the distinctive layering and the typical 2-4 centuries between primary silt layers provides a way to cross

  13. New approach of determinations of earthquake moment magnitude using near earthquake source duration and maximum displacement amplitude of high frequency energy radiation

    Energy Technology Data Exchange (ETDEWEB)

    Gunawan, H.; Puspito, N. T.; Ibrahim, G.; Harjadi, P. J. P. [ITB, Faculty of Earth Sciences and Tecnology (Indonesia); BMKG (Indonesia)

    2012-06-20

    The new approach method to determine the magnitude by using amplitude displacement relationship (A), epicenter distance ({Delta}) and duration of high frequency radiation (t) has been investigated for Tasikmalaya earthquake, on September 2, 2009, and their aftershock. Moment magnitude scale commonly used seismic surface waves with the teleseismic range of the period is greater than 200 seconds or a moment magnitude of the P wave using teleseismic seismogram data and the range of 10-60 seconds. In this research techniques have been developed a new approach to determine the displacement amplitude and duration of high frequency radiation using near earthquake. Determination of the duration of high frequency using half of period of P waves on the seismograms displacement. This is due tothe very complex rupture process in the near earthquake. Seismic data of the P wave mixing with other wave (S wave) before the duration runs out, so it is difficult to separate or determined the final of P-wave. Application of the 68 earthquakes recorded by station of CISI, Garut West Java, the following relationship is obtained: Mw = 0.78 log (A) + 0.83 log {Delta}+ 0.69 log (t) + 6.46 with: A (m), d (km) and t (second). Moment magnitude of this new approach is quite reliable, time processing faster so useful for early warning.

  14. New approach of determinations of earthquake moment magnitude using near earthquake source duration and maximum displacement amplitude of high frequency energy radiation

    Science.gov (United States)

    Gunawan, H.; Puspito, N. T.; Ibrahim, G.; Harjadi, P. J. P.

    2012-06-01

    The new approach method to determine the magnitude by using amplitude displacement relationship (A), epicenter distance (Δ) and duration of high frequency radiation (t) has been investigated for Tasikmalaya earthquake, on September 2, 2009, and their aftershock. Moment magnitude scale commonly used seismic surface waves with the teleseismic range of the period is greater than 200 seconds or a moment magnitude of the P wave using teleseismic seismogram data and the range of 10-60 seconds. In this research techniques have been developed a new approach to determine the displacement amplitude and duration of high frequency radiation using near earthquake. Determination of the duration of high frequency using half of period of P waves on the seismograms displacement. This is due tothe very complex rupture process in the near earthquake. Seismic data of the P wave mixing with other wave (S wave) before the duration runs out, so it is difficult to separate or determined the final of P-wave. Application of the 68 earthquakes recorded by station of CISI, Garut West Java, the following relationship is obtained: Mw = 0.78 log (A) + 0.83 log Δ + 0.69 log (t) + 6.46 with: A (m), d (km) and t (second). Moment magnitude of this new approach is quite reliable, time processing faster so useful for early warning.

  15. New approach of determinations of earthquake moment magnitude using near earthquake source duration and maximum displacement amplitude of high frequency energy radiation

    International Nuclear Information System (INIS)

    Gunawan, H.; Puspito, N. T.; Ibrahim, G.; Harjadi, P. J. P.

    2012-01-01

    The new approach method to determine the magnitude by using amplitude displacement relationship (A), epicenter distance (Δ) and duration of high frequency radiation (t) has been investigated for Tasikmalaya earthquake, on September 2, 2009, and their aftershock. Moment magnitude scale commonly used seismic surface waves with the teleseismic range of the period is greater than 200 seconds or a moment magnitude of the P wave using teleseismic seismogram data and the range of 10-60 seconds. In this research techniques have been developed a new approach to determine the displacement amplitude and duration of high frequency radiation using near earthquake. Determination of the duration of high frequency using half of period of P waves on the seismograms displacement. This is due tothe very complex rupture process in the near earthquake. Seismic data of the P wave mixing with other wave (S wave) before the duration runs out, so it is difficult to separate or determined the final of P-wave. Application of the 68 earthquakes recorded by station of CISI, Garut West Java, the following relationship is obtained: Mw = 0.78 log (A) + 0.83 log Δ+ 0.69 log (t) + 6.46 with: A (m), d (km) and t (second). Moment magnitude of this new approach is quite reliable, time processing faster so useful for early warning.

  16. Instant web scraping with Java

    CERN Document Server

    Mitchell, Ryan

    2013-01-01

    This book is full of short, concise recipes to learn a variety of useful web scraping techniques using Java. You will start with a simple basic recipe of setting up your Java environment and gradually learn some more advanced recipes such as using complex Scrapers.Instant Web Scraping with Java is aimed at developers who, while not necessarily familiar with Java, are at least ready to dive into the complexities of this language with simple, step-by-step instructions leading the way. It is assumed that you have at least an intermediate knowledge of HTML, some knowledge of MySQL, and access to a

  17. Use of high resolution satellite images for tracking of changes in the lineament structure, caused by earthquakes, situated nearly the Pacific coast of the North and South America.

    Science.gov (United States)

    Arellano-Baeza, A. A.; Garcia, R. V.; Trejo-Soto, M.

    The Pacific coast of the North and South America is one of the most seismically and volcanically active regions in the world forming part of the so-called Ring of Fire More than 10 earthquakes with the Richter scale magnitude 4 5 were analyzed They were located in the regions with small seasonal variations and limited vegetation to facilitate the tracking of features associated with the seismic activity only High resolution Aster satellite images were used to extract the principal lineaments using The Lineament Extraction and Stripes Statistic Analysis LESSA software package It was found that the number and orientation of lineaments changed significantly about one month before an earthquake approximately and a few months later the system returns to its initial state This effect increases with the earthquake magnitude and it is much more easily detectable in case of convergent plate boundaries for example Nasca and South American plates The results obtained open the possibility to develop a methodology able to evaluate the seismic risk in the regions with similar geological conditions

  18. Some researches on converting a C++ software to java

    International Nuclear Information System (INIS)

    Ding Yuzheng; Wang Taijie; Dai Guiliang

    1997-01-01

    Because of Java's flexibility, portability, and relative simplicity, Java programming language has sparked considerable interest among software developers. The author presents the experience on converting a C++ off-line software prototype to Java. Some benefits of Java while converting the C++ prototype to Java and also some limitations of Java are described. Some of these limitations arise from the differences between Java and C++, Others are due to weakness of Java itself. The article also introduces some methods to work around Java's limitations

  19. NINJA: Java for High Performance Numerical Computing

    Directory of Open Access Journals (Sweden)

    José E. Moreira

    2002-01-01

    Full Text Available When Java was first introduced, there was a perception that its many benefits came at a significant performance cost. In the particularly performance-sensitive field of numerical computing, initial measurements indicated a hundred-fold performance disadvantage between Java and more established languages such as Fortran and C. Although much progress has been made, and Java now can be competitive with C/C++ in many important situations, significant performance challenges remain. Existing Java virtual machines are not yet capable of performing the advanced loop transformations and automatic parallelization that are now common in state-of-the-art Fortran compilers. Java also has difficulties in implementing complex arithmetic efficiently. These performance deficiencies can be attacked with a combination of class libraries (packages, in Java that implement truly multidimensional arrays and complex numbers, and new compiler techniques that exploit the properties of these class libraries to enable other, more conventional, optimizations. Two compiler techniques, versioning and semantic expansion, can be leveraged to allow fully automatic optimization and parallelization of Java code. Our measurements with the NINJA prototype Java environment show that Java can be competitive in performance with highly optimized and tuned Fortran code.

  20. APINetworks Java. A Java approach to the efficient treatment of large-scale complex networks

    Science.gov (United States)

    Muñoz-Caro, Camelia; Niño, Alfonso; Reyes, Sebastián; Castillo, Miriam

    2016-10-01

    We present a new version of the core structural package of our Application Programming Interface, APINetworks, for the treatment of complex networks in arbitrary computational environments. The new version is written in Java and presents several advantages over the previous C++ version: the portability of the Java code, the easiness of object-oriented design implementations, and the simplicity of memory management. In addition, some additional data structures are introduced for storing the sets of nodes and edges. Also, by resorting to the different garbage collectors currently available in the JVM the Java version is much more efficient than the C++ one with respect to memory management. In particular, the G1 collector is the most efficient one because of the parallel execution of G1 and the Java application. Using G1, APINetworks Java outperforms the C++ version and the well-known NetworkX and JGraphT packages in the building and BFS traversal of linear and complete networks. The better memory management of the present version allows for the modeling of much larger networks.

  1. A Model for Java with Wildcards

    DEFF Research Database (Denmark)

    Cameron, Nicholas R.; Drossopoulou, Sophia; Ernst, Erik

    2008-01-01

    Wildcards are a complex and subtle part of the Java type system, present since version 5.0. Although there have been various formalisations and partial type soundness results concerning wildcards, to the best of our knowledge, no system that includes all the key aspects of Java wildcards has been...... proven type sound. This paper establishes that Java wildcards are type sound. We describe a new formal model based on explicit existential types whose pack and unpack operations are handled implicitly, and prove it type sound. Moreover, we specify a translation from a subset of Java to our formal model......, and discuss how several interesting aspects of the Java type system are handled....

  2. Model Checker for Java Programs

    Science.gov (United States)

    Visser, Willem

    2007-01-01

    Java Pathfinder (JPF) is a verification and testing environment for Java that integrates model checking, program analysis, and testing. JPF consists of a custom-made Java Virtual Machine (JVM) that interprets bytecode, combined with a search interface to allow the complete behavior of a Java program to be analyzed, including interleavings of concurrent programs. JPF is implemented in Java, and its architecture is highly modular to support rapid prototyping of new features. JPF is an explicit-state model checker, because it enumerates all visited states and, therefore, suffers from the state-explosion problem inherent in analyzing large programs. It is suited to analyzing programs less than 10kLOC, but has been successfully applied to finding errors in concurrent programs up to 100kLOC. When an error is found, a trace from the initial state to the error is produced to guide the debugging. JPF works at the bytecode level, meaning that all of Java can be model-checked. By default, the software checks for all runtime errors (uncaught exceptions), assertions violations (supports Java s assert), and deadlocks. JPF uses garbage collection and symmetry reductions of the heap during model checking to reduce state-explosion, as well as dynamic partial order reductions to lower the number of interleavings analyzed. JPF is capable of symbolic execution of Java programs, including symbolic execution of complex data such as linked lists and trees. JPF is extensible as it allows for the creation of listeners that can subscribe to events during searches. The creation of dedicated code to be executed in place of regular classes is supported and allows users to easily handle native calls and to improve the efficiency of the analysis.

  3. Java online monitoring framework

    International Nuclear Information System (INIS)

    Ronan, M.; Kirkby, D.; Johnson, A.S.; Groot, D. de

    1997-10-01

    An online monitoring framework has been written in the Java Language Environment to develop applications for monitoring special purpose detectors during commissioning of the PEP-II Interaction Region. PEP-II machine parameters and signals from several of the commissioning detectors are logged through VxWorks/EPICS and displayed by Java display applications. Remote clients are able to monitor the machine and detector performance using graphical displays and analysis histogram packages. In this paper, the design and implementation of the object-oriented Java framework is described. Illustrations of data acquisition, display and histograming applications are also given

  4. Limitation of the Predominant-Period Estimator for Earthquake Early Warning and the Initial Rupture of Earthquakes

    Science.gov (United States)

    Yamada, T.; Ide, S.

    2007-12-01

    Earthquake early warning is an important and challenging issue for the reduction of the seismic damage, especially for the mitigation of human suffering. One of the most important problems in earthquake early warning systems is how immediately we can estimate the final size of an earthquake after we observe the ground motion. It is relevant to the problem whether the initial rupture of an earthquake has some information associated with its final size. Nakamura (1988) developed the Urgent Earthquake Detection and Alarm System (UrEDAS). It calculates the predominant period of the P wave (τp) and estimates the magnitude of an earthquake immediately after the P wave arrival from the value of τpmax, or the maximum value of τp. The similar approach has been adapted by other earthquake alarm systems (e.g., Allen and Kanamori (2003)). To investigate the characteristic of the parameter τp and the effect of the length of the time window (TW) in the τpmax calculation, we analyze the high-frequency recordings of earthquakes at very close distances in the Mponeng mine in South Africa. We find that values of τpmax have upper and lower limits. For larger earthquakes whose source durations are longer than TW, the values of τpmax have an upper limit which depends on TW. On the other hand, the values for smaller earthquakes have a lower limit which is proportional to the sampling interval. For intermediate earthquakes, the values of τpmax are close to their typical source durations. These two limits and the slope for intermediate earthquakes yield an artificial final size dependence of τpmax in a wide size range. The parameter τpmax is useful for detecting large earthquakes and broadcasting earthquake early warnings. However, its dependence on the final size of earthquakes does not suggest that the earthquake rupture is deterministic. This is because τpmax does not always have a direct relation to the physical quantities of an earthquake.

  5. Swedish earthquakes and acceleration probabilities

    International Nuclear Information System (INIS)

    Slunga, R.

    1979-03-01

    A method to assign probabilities to ground accelerations for Swedish sites is described. As hardly any nearfield instrumental data is available we are left with the problem of interpreting macroseismic data in terms of acceleration. By theoretical wave propagation computations the relation between seismic strength of the earthquake, focal depth, distance and ground accelerations are calculated. We found that most Swedish earthquake of the area, the 1904 earthquake 100 km south of Oslo, is an exception and probably had a focal depth exceeding 25 km. For the nuclear power plant sites an annual probability of 10 -5 has been proposed as interesting. This probability gives ground accelerations in the range 5-20 % for the sites. This acceleration is for a free bedrock site. For consistency all acceleration results in this study are given for bedrock sites. When applicating our model to the 1904 earthquake and assuming the focal zone to be in the lower crust we get the epicentral acceleration of this earthquake to be 5-15 % g. The results above are based on an analyses of macrosismic data as relevant instrumental data is lacking. However, the macroseismic acceleration model deduced in this study gives epicentral ground acceleration of small Swedish earthquakes in agreement with existent distant instrumental data. (author)

  6. Graph Transforming Java Data

    NARCIS (Netherlands)

    de Mol, M.J.; Rensink, Arend; Hunt, James J.

    This paper introduces an approach for adding graph transformation-based functionality to existing JAVA programs. The approach relies on a set of annotations to identify the intended graph structure, as well as on user methods to manipulate that structure, within the user’s own JAVA class

  7. Der Weg zum Java-Profi Konzepte und Techniken für die professionelle Java-Entwicklung

    CERN Document Server

    Inden, Michael

    2015-01-01

    Sie haben bereits Einiges an Erfahrung mit Java und möchten Ihre Entwicklungstätigkeit nun professionalisieren? Oder sind Sie schon auf dem Weg zum Profi, benötigen aber ein Nachschlagewerk, das Ihnen die wichtigen Themen aus der Java-Welt kompakt und kompetent vermittelt? Dieses Buch bietet eine umfassende Einführung in die professionelle Entwicklung und vermittelt Ihnen das notwendige Wissen, um stabile und erweiterbare Softwaresysteme auf Java-SE-Basis zu bauen. Praxisnahe Beispiele helfen dabei, das Gelernte rasch umzusetzen. Neben der Praxis wird viel Wert auf das Verständnis zugrunde liegender Konzepte gelegt. Dabei kommen dem Autor Michael Inden seine umfangreichen Schulungs- und Entwicklererfahrungen zugute - und Ihnen als Leser damit ebenso. Diese Neuauflage wurde durchgehend überarbeitet, aktualisiert und erweitert. Natürlich darf das aktuelle Java 8 nicht fehlen. Verschiedene Kapitel sind Java 8 und seinen Neuerungen gewidmet. Dort wird ein fundierter Einstieg in die umfangreichen Erweit...

  8. Gravity distribution characteristics and their relationship with the distribution of earthquakes and tectonic units in the North–South seismic belt, China

    Directory of Open Access Journals (Sweden)

    Guiju Wu

    2015-05-01

    Full Text Available The North–South Seismic Belt (NSSB is a Chinese tectonic boundary with a very complex structure, showing a sharp change in several geophysical field characteristics. To study these characteristics and their relationship with the distribution of earthquakes and faults in the study area, we first analyze the spatial gravity anomaly to achieve the Bouguer gravity anomaly (EGM2008 BGA and the regional gravity survey Bouguer gravity anomaly. Next, we ascertain the Moho depth and crustal thickness of the study area using interface inversion with the control points derived from the seismic and magnetotelluric sounding profiles achieved in recent years. In this paper, we summarize the relief, trend, Moho gradient, and crustal nature, in addition to their relationship with the distribution of earthquakes and faults in the study area. The findings show that earthquakes with magnitudes greater than Ms7.0 are mainly distributed in the Moho Bouguer anomaly variation belt and faults. The results of the study are important for future research on tectonic characteristics, geological and geophysical surveys, and seismicity patterns.

  9. Java EE 7 the big picture

    CERN Document Server

    Coward, Danny

    2015-01-01

    Java EE 7: The Big Picture uniquely explores the entire Java EE 7 platform in an all-encompassing style while examining each tier of the platform in enough detail so that you can select the right technologies for specific project needs. In this authoritative guide, Java expert Danny Coward walks you through the code, applications, and frameworks that power the platform. Take full advantage of the robust capabilities of Java EE 7, increase your productivity, and meet enterprise demands with help from this Oracle Press resource.

  10. Java EE 7 development with WildFly

    CERN Document Server

    Ćmil, Michał; Marchioni, Francesco

    2014-01-01

    If you are a Java developer who wants to learn about Java EE, this is the book for you. It's also ideal for developers who already have experience with the Java EE platform but would like to learn more about the new Java EE 7 features by analyzing fully functional sample applications using the new application server WildFly.

  11. Nanoseismicity and picoseismicity rate changes from static stress triggering caused by a Mw 2.2 earthquake in Mponeng gold mine, South Africa

    Science.gov (United States)

    Kozłowska, Maria; Orlecka-Sikora, Beata; Kwiatek, Grzegorz; Boettcher, Margaret S.; Dresen, Georg

    2015-01-01

    Static stress changes following large earthquakes are known to affect the rate and distribution of aftershocks, yet this process has not been thoroughly investigated for nanoseismicity and picoseismicity at centimeter length scales. Here we utilize a unique data set of M ≥ -3.4 earthquakes following a Mw 2.2 earthquake in Mponeng gold mine, South Africa, that was recorded during a quiet interval in the mine to investigate if rate- and state-based modeling is valid for shallow, mining-induced seismicity. We use Dieterich's (1994) rate- and state-dependent formulation for earthquake productivity, which requires estimation of four parameters: (1) Coulomb stress changes due to the main shock, (2) the reference seismicity rate, (3) frictional resistance parameter, and (4) the duration of aftershock relaxation time. Comparisons of the modeled spatiotemporal patterns of seismicity based on two different source models with the observed distribution show that while the spatial patterns match well, the rate of modeled aftershocks is lower than the observed rate. To test our model, we used three metrics of the goodness-of-fit evaluation. The null hypothesis, of no significant difference between modeled and observed seismicity rates, was only rejected in the depth interval containing the main shock. Results show that mining-induced earthquakes may be followed by a stress relaxation expressed through aftershocks located on the rupture plane and in regions of positive Coulomb stress change. Furthermore, we demonstrate that the main features of the temporal and spatial distributions of very small, mining-induced earthquakes can be successfully determined using rate- and state-based stress modeling.

  12. Long-term responses of sandy beach crustaceans to the effects of coastal armouring after the 2010 Maule earthquake in South Central Chile

    Science.gov (United States)

    Rodil, Iván F.; Jaramillo, Eduardo; Acuña, Emilio; Manzano, Mario; Velasquez, Carlos

    2016-02-01

    Earthquakes and tsunamis are large physical disturbances frequently striking the coast of Chile with dramatic effects on intertidal habitats. Armouring structures built as societal responses to beach erosion and shoreline retreat are also responsible of coastal squeeze and habitat loss. The ecological implications of interactions between coastal armouring and earthquakes have recently started to be studied for beach ecosystems. How long interactive impacts persist is still unclear because monitoring after disturbance generally extends for a few months. During five years after the Maule earthquake (South Central Chile, February 27th 2010) we monitored the variability in population abundances of the most common crustacean inhabitants of different beach zones (i.e. upper, medium, and lower intertidal) at two armoured (one concrete seawall and one rocky revetment) and one unarmoured sites along the sandy beach of Llico. Beach morphology changed after the earthquake-mediated uplift, restoring upper- and mid-shore armoured levels that were rapidly colonized by typical crustacean species. However, post-earthquake increasing human activities affected the colonization process of sandy beach crustaceans in front of the seawall. Lower-shore crab Emerita analoga was the less affected by armouring structures, and it was the only crustacean species present at the three sites before and after the earthquake. This study shows that field sampling carried out promptly after major disturbances, and monitoring of the affected sites long after the disturbance is gone are effective approaches to increase the knowledge on the interactive effects of large-scale natural phenomena and artificial defences on beach ecology.

  13. The Road to Total Earthquake Safety

    Science.gov (United States)

    Frohlich, Cliff

    Cinna Lomnitz is possibly the most distinguished earthquake seismologist in all of Central and South America. Among many other credentials, Lomnitz has personally experienced the shaking and devastation that accompanied no fewer than five major earthquakes—Chile, 1939; Kern County, California, 1952; Chile, 1960; Caracas,Venezuela, 1967; and Mexico City, 1985. Thus he clearly has much to teach someone like myself, who has never even actually felt a real earthquake.What is this slim book? The Road to Total Earthquake Safety summarizes Lomnitz's May 1999 presentation at the Seventh Mallet-Milne Lecture, sponsored by the Society for Earthquake and Civil Engineering Dynamics. His arguments are motivated by the damage that occurred in three earthquakes—Mexico City, 1985; Loma Prieta, California, 1989; and Kobe, Japan, 1995. All three quakes occurred in regions where earthquakes are common. Yet in all three some of the worst damage occurred in structures located a significant distance from the epicenter and engineered specifically to resist earthquakes. Some of the damage also indicated that the structures failed because they had experienced considerable rotational or twisting motion. Clearly, Lomnitz argues, there must be fundamental flaws in the usually accepted models explaining how earthquakes generate strong motions, and how we should design resistant structures.

  14. Object oriented JavaScript

    CERN Document Server

    Stefanov, Stoyan

    2013-01-01

    You will first be introduced to object-oriented programming, then to the basics of objects in JavaScript. This book takes a do-it-yourself approach when it comes to writing code, because the best way to really learn a programming language is by writing code. You are encouraged to type code into Firebug's console, see how it works and then tweak it and play around with it. There are practice questions at the end of each chapter to help you review what you have learned.For new to intermediate JavaScript developer who wants to prepare themselves for web development problems solved by smart JavaSc

  15. JavaFX2 a Swing

    OpenAIRE

    Čapek, Ondřej

    2011-01-01

    The bachelor thesis deals mainly with the JavaFX2 library and its innovations. An aim is to acquaint readers with wider possibilities and help them with a transition from Swing to JavaFX2. In the thesis there are gone into benefits JavaFX2 which is accompanied by a source code examples for an illustration. A part of the thesis is also an application which shows differences between Swing and JavaFX2 both a graphical view as well as a viewing of the source code. Most of the information containe...

  16. Napa Earthquake impact on water systems

    Science.gov (United States)

    Wang, J.

    2014-12-01

    South Napa earthquake occurred in Napa, California on August 24 at 3am, local time, and the magnitude is 6.0. The earthquake was the largest in SF Bay Area since the 1989 Loma Prieta earthquake. Economic loss topped $ 1 billion. Wine makers cleaning up and estimated the damage on tourism. Around 15,000 cases of lovely cabernet were pouring into the garden at the Hess Collection. Earthquake potentially raise water pollution risks, could cause water crisis. CA suffered water shortage recent years, and it could be helpful on how to prevent underground/surface water pollution from earthquake. This research gives a clear view on drinking water system in CA, pollution on river systems, as well as estimation on earthquake impact on water supply. The Sacramento-San Joaquin River delta (close to Napa), is the center of the state's water distribution system, delivering fresh water to more than 25 million residents and 3 million acres of farmland. Delta water conveyed through a network of levees is crucial to Southern California. The drought has significantly curtailed water export, and salt water intrusion reduced fresh water outflows. Strong shaking from a nearby earthquake can cause saturated, loose, sandy soils liquefaction, and could potentially damage major delta levee systems near Napa. Napa earthquake is a wake-up call for Southern California. It could potentially damage freshwater supply system.

  17. Investigating potential seismic hazard in the Gulf of Gökova (South Eastern Aegean Sea) deduced from recent shallow earthquake activity

    Science.gov (United States)

    Rontogianni, S.; Konstantinou, K. I.; Evangelidis, C.; Melis, N. S.

    2011-12-01

    The Gulf of Gökova is located in the southeast Aegean along the coast of the southwest Anatolia. It is surrounded by the Bodrum Peninsula to the north, Datça Peninsula to the south and the island of Kos to the west. The Gulf is under a N-S regional extensional tectonic regime related to the westerly escape of the Anatolian plate, as a result of the collision of the Arab-African and Eurasian plates. Multi-channel seismic reflection studies that took place in the area revealed a E-W trending buried listric normal fault to the south of the Gulf, the Datça Fault, the associated antithetic faults in the north of the Gulf and a younger NE active fault, named Gökova Tranfer Fault (GTF), in the central part of the Gulf. According to these studies, the activity of the Datça Fault has been decelerated, possibly since Pleistocene, while the continuing extension has been taken up by the faults in the northeast margin of the Gulf. For our analysis we selected all the shallow earthquake activity that took place in the Gulf, within the time window from 2002 to 2011 as provided by the two seismological centers NOA-IG (HL) and KOERI-NEMC (KO). We used data from 15 three component seismic stations surrounding the Gulf. This seismic activity is observed within three periods: (a) November 2002 - May 2003, (b) May 2004 - end of 2007 and (c) December 2008 - May 2011. The strongest events recorded took place in January 2005 and May 2011, with local magnitudes ML 5.1 and 4.9 respectively. After a thorough quality control, a dataset of 192 seismic events was selected, with criteria that at least 4P and 3S phases were available. Manually picked arrival times for these selected events were inverted in order to obtain a 1D velocity model with station corrections. Probabilistic nonlinear earthquake locations were calculated using this newly derived velocity model. The earthquake locations showed that the seismic activity extends from the island of Kos to the center of the Gulf, mainly

  18. First record of Puerulus mesodontus Chan, Ma & Chu, 2013 (Crustacea, Decapoda, Achelata, Palinuridae) from south of Java, Indonesia.

    Science.gov (United States)

    Wardiatno, Yusli; Hakim, Agus Alim; Mashar, Ali; Butet, Nurlisa Alias; Adrianto, Luky; Farajallah, Achmad

    2016-01-01

    Three specimens of Puerulus mesodontus Chan, Ma & Chu, 2013 (Crustacea, Decapoda, Achelata, Palinuridae) were collected from Palabuhanratu Bay, southern Java, Indonesia. There is no previous record on the presence of the species in Indonesia. This finding represents the first record of this species in Java, Indonesia, and confirms that the species is present in the Indian Ocean. The morphological characters of the species are described. This paper contains a new distribution record of a lobster species from Indonesian waters.

  19. Relationship of heat and cold to earthquakes

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Y.

    1980-06-26

    An analysis of 54 earthquakes of magnitude 7 and above, including 13 of magnitude 8 and above, between 780 BC and the present, shows that the vast majority of them fell in the four major cool periods during this time span, or on the boundaries of these periods. Between 1800 and 1876, four periods of earthquake activity in China can be recognized, and these tend to correspond to relatively cold periods over that time span. An analysis of earthquakes of magnitude 6 or above over the period 1951 to 1965 gives the following results: earthquakes in north and southwest China tended to occur when the preceding year had an above-average annual temperature and winter temperature; in the northeast they tended to occur in a year after a year with an above-average winter temperature; in the northwest there was also a connection with a preceding warm winter, but to a less pronounced degree. The few earthquakes in South China seemed to follow cold winters. Both the Tangshan and Yongshan Pass earthquakes were preceded by unusually warm years and relatively high winter temperatures.

  20. The definitive guide to Java Swing

    CERN Document Server

    Zukowski, John

    2005-01-01

    Updated for the 1.5 edition of the Java 2 Platform, this third edition is a one-stop resource for serious Java developers. It shows the parts of Java Swing API used to create graphical user interfaces (GUI); and Model-View-Controller architecture that lies behind all Swing components; and customizing components for specific environments.

  1. Java simulations of embedded control systems.

    Science.gov (United States)

    Farias, Gonzalo; Cervin, Anton; Arzén, Karl-Erik; Dormido, Sebastián; Esquembre, Francisco

    2010-01-01

    This paper introduces a new Open Source Java library suited for the simulation of embedded control systems. The library is based on the ideas and architecture of TrueTime, a toolbox of Matlab devoted to this topic, and allows Java programmers to simulate the performance of control processes which run in a real time environment. Such simulations can improve considerably the learning and design of multitasking real-time systems. The choice of Java increases considerably the usability of our library, because many educators program already in this language. But also because the library can be easily used by Easy Java Simulations (EJS), a popular modeling and authoring tool that is increasingly used in the field of Control Education. EJS allows instructors, students, and researchers with less programming capabilities to create advanced interactive simulations in Java. The paper describes the ideas, implementation, and sample use of the new library both for pure Java programmers and for EJS users. The JTT library and some examples are online available on http://lab.dia.uned.es/jtt.

  2. JAVA based LCD Reconstruction and Analysis Tools

    International Nuclear Information System (INIS)

    Bower, G.

    2004-01-01

    We summarize the current status and future developments of the North American Group's Java-based system for studying physics and detector design issues at a linear collider. The system is built around Java Analysis Studio (JAS) an experiment-independent Java-based utility for data analysis. Although the system is an integrated package running in JAS, many parts of it are also standalone Java utilities

  3. Java based LCD reconstruction and analysis tools

    International Nuclear Information System (INIS)

    Bower, Gary; Cassell, Ron; Graf, Norman; Johnson, Tony; Ronan, Mike

    2001-01-01

    We summarize the current status and future developments of the North American Group's Java-based system for studying physics and detector design issues at a linear collider. The system is built around Java Analysis Studio (JAS) an experiment-independent Java-based utility for data analysis. Although the system is an integrated package running in JAS, many parts of it are also standalone Java utilities

  4. Southern California Earthquake Center/Undergraduate Studies in Earthquake Information Technology (SCEC/UseIT): Towards the Next Generation of Internship

    Science.gov (United States)

    Perry, S.; Benthien, M.; Jordan, T. H.

    2005-12-01

    The SCEC/UseIT internship program is training the next generation of earthquake scientist, with methods that can be adapted to other disciplines. UseIT interns work collaboratively, in multi-disciplinary teams, conducting computer science research that is needed by earthquake scientists. Since 2002, the UseIT program has welcomed 64 students, in some two dozen majors, at all class levels, from schools around the nation. Each summer''s work is posed as a ``Grand Challenge.'' The students then organize themselves into project teams, decide how to proceed, and pool their diverse talents and backgrounds. They have traditional mentors, who provide advice and encouragement, but they also mentor one another, and this has proved to be a powerful relationship. Most begin with fear that their Grand Challenge is impossible, and end with excitement and pride about what they have accomplished. The 22 UseIT interns in summer, 2005, were primarily computer science and engineering majors, with others in geology, mathematics, English, digital media design, physics, history, and cinema. The 2005 Grand Challenge was to "build an earthquake monitoring system" to aid scientists who must visualize rapidly evolving earthquake sequences and convey information to emergency personnel and the public. Most UseIT interns were engaged in software engineering, bringing new datasets and functionality to SCEC-VDO (Virtual Display of Objects), a 3D visualization software that was prototyped by interns last year, using Java3D and an extensible, plug-in architecture based on the Eclipse Integrated Development Environment. Other UseIT interns used SCEC-VDO to make animated movies, and experimented with imagery in order to communicate concepts and events in earthquake science. One movie-making project included the creation of an assessment to test the effectiveness of the movie''s educational message. Finally, one intern created an interactive, multimedia presentation of the UseIT program.

  5. Java to C: A Primer

    DEFF Research Database (Denmark)

    McDowell, Charlie; Villadsen, Jørgen

    This book is designed to be used as a quick introduction to C for programmers already familiar with Java. It is not a replacement for a reference book on C but is instead a supplement. For the programmer already familiar with Java, the typical book on C requires the reader to wade through many...... details of already-familiar material. In this book, we quickly present the main concepts needed to begin writing serious programs in C, highlighting the differences between C and Java....

  6. Study on Java Programming Education

    OpenAIRE

    太田, 信宏

    2009-01-01

    The purpose of this study is to consider the content and key points for inclusion in a Java programming course for beginners. The Java programming language has a variety of functions and has the largest application field of all such languages, containing many themes that are appropriate for any such programming course. The multifunctional and wide-ranging functions of Java, however, may actually act as a barrier to study for beginners. The core content of a programming class for beginners sho...

  7. Effects of the South Hyogo earthquake on LNG facilities and damage prevention measures; Effets du tremblement de terre de Hyogo-Sud sur les installations GNL et mesures pour la prevention des degats

    Energy Technology Data Exchange (ETDEWEB)

    Yoichi, Fuchimoto [Osaka Gas Co., Ltd., Dept. Production (Japan); Yukiyoshi, Hasegawa [Osaka Gas Co., Ltd., Senboku LNG Terminail (Japan); Ysuhiro, Ueno; Junji, Doi [Osaka Gas Co., Ltd., Engineering Dept. (Japan)

    2000-07-01

    The South Hyogo Earthquake that took place in the morning of January 17, 1995, at about 5:46 A.M. registered a magnitude of 7.2 on the Richter scale with earthquake motion of 800 gal (horizontal) on the ground surface. It was the largest vertical-motion earthquake to hit a major urban area in modern days, and it struck the service area of Osaka Gas. The ground motion values monitored were 240 gal at the Senboku LNG Terminal and 189 gal at the Himeji LNG Terminal, but these terminals did not receive sufficient damage to affect their gas processing or supply functions. There were also seven gas holders operating in the worst hit area, where ground motion of 616 to 833 gal was recorded. However, these gas holders were also not damaged by the earthquake. These gas processing plants and supply facilities were constructed in compliance with the current seismic design standards, and they incorporate elastic design (capable of withstanding ground motion of 300 gal max.) in which due consideration is given to factors such as their importance and the ground characteristics. Although the South Hyogo Earthquake generated ground motion that far exceeded the design level of the gas holders, the facilities maintained their integrity without shape deformation, thus demonstrating their high level of earthquake resistance. For other gas processing facilities, Osaka Gas conducted evaluations of their resistance to an extremely large earthquake using the ultimate strength design method, and confirmed similar levels of earthquake resistance performance. According to the above examination results, it was found that design based on the current seismic design standards is capable of withstanding an earthquake of high magnitude. However, the current seismic design standards do not take into consideration earthquakes of an extremely high magnitude or specify the use of the ultimate strength design method. Therefore, The Japan Gas Association is currently examining standards that take those

  8. A Profile for Safety Critical Java

    DEFF Research Database (Denmark)

    Schoeberl, Martin; Søndergaard, Hans; Thomsen, Bent

    2007-01-01

    We propose a new, minimal specification for real-time Java for safety critical applications. The intention is to provide a profile that supports programming of applications that can be validated against safety critical standards such as DO-178B [15]. The proposed profile is in line with the Java...... specification request JSR-302: Safety Critical Java Technology, which is still under discussion. In contrast to the current direction of the expert group for the JSR-302 we do not subset the rather complex Real-Time Specification for Java (RTSJ). Nevertheless, our profile can be implemented on top of an RTSJ...

  9. Safety-Critical Java for Embedded Systems

    DEFF Research Database (Denmark)

    Rios Rivas, Juan Ricardo

    for Java aims at providing a reduced set of the Java programming language that can be used for systems that need to be certified at the highest levels of criticality. Safety-critical Java (SCJ) restricts how a developer can structure an application by providing a specific programming model...... and by restricting the set of methods and libraries that can be used. Furthermore, its memory model do not use a garbage-collected heap but scoped memories. In this thesis we examine the use of the SCJ specification through an implementation in a time-predictable, FPGA-based Java processor. The specification is now...

  10. Survey on birds of prey and owls Falconiformes and Strigiformes) on Java sea islands: correction and additions.

    NARCIS (Netherlands)

    Nijman, V.

    2005-01-01

    ): In Southeast Asia the short-eared owl Asio flammeus is a northern migrant and is normally not recorded south of Singapore and, rarely, northern Borneo. The occurrence of short-eared owl in the Kangean archipelago, Java Sea, has been noted in several publications, including a recent one in this

  11. The 2006 July 17 Java (Indonesia) tsunami from satellite imagery and numerical modelling: a single or complex source?

    Science.gov (United States)

    Hébert, H.; Burg, P.-E.; Binet, R.; Lavigne, F.; Allgeyer, S.; Schindelé, F.

    2012-12-01

    The Mw 7.8 2006 July 17 earthquake off the southern coast of Java, Indonesia, has been responsible for a very large tsunami causing more than 700 casualties. The tsunami has been observed on at least 200 km of coastline in the region of Pangandaran (West Java), with run-up heights from 5 to more than 20 m. Such a large tsunami, with respect to the source magnitude, has been attributed to the slow character of the seismic rupture, defining the event as a so-called tsunami earthquake, but it has also been suggested that the largest run-up heights are actually the result of a second local landslide source. Here we test whether a single slow earthquake source can explain the tsunami run-up, using a combination of new detailed data in the region of the largest run-ups and comparison with modelled run-ups for a range of plausible earthquake source models. Using high-resolution satellite imagery (SPOT 5 and Quickbird), the coastal impact of the tsunami is refined in the surroundings of the high-security Permisan prison on Nusa Kambangan island, where 20 m run-up had been recorded directly after the event. These data confirm the extreme inundation lengths close to the prison, and extend the area of maximum impact further along the Nusa Kambangan island (about 20 km of shoreline), where inundation lengths reach several hundreds of metres, suggesting run-up as high as 10-15 m. Tsunami modelling has been conducted in detail for the high run-up Permisan area (Nusa Kambangan) and the PLTU power plant about 25 km eastwards, where run-up reached only 4-6 m and a video recording of the tsunami arrival is available. For the Permisan prison a high-resolution DEM was built from stereoscopic satellite imagery. The regular basin of the PLTU plant was designed using photographs and direct observations. For the earthquake's mechanism, both static (infinite) and finite (kinematic) ruptures are investigated using two published source models. The models account rather well for the sea level

  12. Using JavaScript and the FDSN web service to create an interactive earthquake information system

    Science.gov (United States)

    Fischer, Kasper D.

    2015-04-01

    The FDSN web service provides a web interface to access earthquake meta-data (e. g. event or station information) and waveform date over the internet. Requests are send to a server as URLs and the output is either XML or miniSEED. This makes it hard to read by humans but easy to process with different software. Different data centers are already supporting the FDSN web service, e. g. USGS, IRIS, ORFEUS. The FDSN web service is also part of the Seiscomp3 (http://www.seiscomp3.org) software. The Seismological Observatory of the Ruhr-University switched to Seiscomp3 as the standard software for the analysis of mining induced earthquakes at the beginning of 2014. This made it necessary to create a new web-based earthquake information service for the publication of results to the general public. This has be done by processing the output of a FDSN web service query by javascript running in a standard browser. The result is an interactive map presenting the observed events and further information of events and stations on a single web page as a table and on a map. In addition the user can download event information, waveform data and station data in different formats like miniSEED, quakeML or FDSNxml. The developed code and all used libraries are open source and freely available.

  13. HTML5 programming with JavaScript for dummies

    CERN Document Server

    Mueller, John Paul

    2013-01-01

    Web designers and programmers, add JavaScript to your HTML5 development toolkit without fear Modern websites are complex, and some of the most exciting features - things like geolocation, canvas, portability to mobile and more - require JavaScript to leverage what HTML5 can create. Don't know JavaScript? That's where HTML5 Programming with JavaScript For Dummies comes in. Rather than walking you through JavaScript as a programming language, it approaches JavaScript as a tool to help you enhance web pages. Helps web designers and programmers tap the full power of HT

  14. A review on earthquake and tsunami hazards of the Sumatran plate boundary: Observing expected and unexpected events after the Aceh-Andaman Mw 9.15 event

    Science.gov (United States)

    Natawidjaja, D.

    2013-12-01

    Mw 7.8 ruptured an up-dip section of the 2007 rupture, west of the South Pagai of Mentawai Islands. It shook the region only gently but woke deadly tsunami up to 14 meter heights and killed about 500 people. Despite it has been a bit quite in the past three years but the amount of strain left on the Mentawai segment, especially under Siberut, Sipora and North Pagai Islands is about Mw 8.8 still, waiting to be released sometime in the near future. Beside Mentawai, stydies on prehistorical earthquakes and mapping off strain budget and releases along the Aceh-Andaman indicates that a Mw 8 or greater earthquake is still possible to occur in the next decades. Moreover, the status and characteristics of the megathrust section south of the Mentawai, the Sunda Strait to south Java Ocean, is largely unknown so far. Nonetheless, we do know that this southernmost section has been quite for the past several hundreds years, suggesting a possible seismic gap, and it is close to dense population of industrial and urban areas. Learning from experience, we should not just prepare for the expected of well known sources but also the unexpected ones.

  15. Spatial variations in fault friction related to lithology from rupture and afterslip of the 2014 South Napa, California, earthquake

    Science.gov (United States)

    Michael Floyd,; Richard Walters,; John Elliot,; Funning, Gareth J.; Svarc, Jerry L.; Murray, Jessica R.; Andy Hooper,; Yngvar Larsen,; Petar Marinkovic,; Bürgmann, Roland; Johanson, Ingrid; Tim Wright,

    2016-01-01

    Following earthquakes, faults are often observed to continue slipping aseismically. It has been proposed that this afterslip occurs on parts of the fault with rate-strengthening friction that are stressed by the mainshock, but our understanding has been limited by a lack of immediate, high-resolution observations. Here we show that the behavior of afterslip following the 2014 South Napa earthquake varied over distances of only a few kilometers. This variability cannot be explained by coseismic stress changes alone. We present daily positions from continuous and survey GPS sites that we re-measured within 12 hours of the mainshock, and surface displacements from the new Sentinel-1 radar mission. This unique geodetic data set constrains the distribution and evolution of coseismic and postseismic fault slip with exceptional resolution in space and time. We suggest that the observed heterogeneity in behavior is caused by lithological controls on the frictional properties of the fault plane.

  16. Retrieving Precise Three-Dimensional Deformation on the 2014 M6.0 South Napa Earthquake by Joint Inversion of Multi-Sensor SAR.

    Science.gov (United States)

    Jo, Min-Jeong; Jung, Hyung-Sup; Yun, Sang-Ho

    2017-07-14

    We reconstructed the three-dimensional (3D) surface displacement field of the 24 August 2014 M6.0 South Napa earthquake using SAR data from the Italian Space Agency's COSMO-SkyMed and the European Space Agency's Sentinel-1A satellites. Along-track and cross-track displacements produced with conventional SAR interferometry (InSAR) and multiple-aperture SAR interferometry (MAI) techniques were integrated to retrieve the east, north, and up components of surface deformation. The resulting 3D displacement maps clearly delineated the right-lateral shear motion of the fault rupture with a maximum surface displacement of approximately 45 cm along the fault's strike, showing the east and north components of the trace particularly clearly. These maps also suggested a better-constrained model for the South Napa earthquake. We determined a strike of approximately 338° and dip of 85° by applying the Okada dislocation model considering a single patch with a homogeneous slip motion. Using the distributed slip model obtained by a linear solution, we estimated that a peak slip of approximately 1.7 m occurred around 4 km depth from the surface. 3D modelling using the retrieved 3D maps helps clarify the fault's nature and thus characterize its behaviour.

  17. Writing Kurdish Alphabetics in Java Programming Language

    OpenAIRE

    Rebwar Mala Nabi; Sardasht M-Raouf Mahmood; Mohammed Qadir Kheder; Shadman Mahmood

    2016-01-01

    Nowadays, Kurdish programmers usually suffer when they need to write Kurdish letter while they program in java. More to say, all the versions of Java Development Kits have not supported Kurdish letters. Therefore, the aim of this study is to develop Java Kurdish Language Package (JKLP) for solving writing Kurdish alphabetic in Java programming language. So that Kurdish programmer and/or students they can converts the English-alphabetic to Kurdish-alphabetic. Furthermore, adding Kurdish langua...

  18. Visualization program development using Java

    International Nuclear Information System (INIS)

    Sasaki, Akira; Suto, Keiko

    2002-03-01

    Method of visualization programs using Java for the PC with the graphical user interface (GUI) is discussed, and applied to the visualization and analysis of 1D and 2D data from experiments and numerical simulations. Based on an investigation of programming techniques such as drawing graphics and event driven program, example codes are provided in which GUI is implemented using the Abstract Window Toolkit (AWT). The marked advantage of Java comes from the inclusion of library routines for graphics and networking as its language specification, which enables ordinary scientific programmers to make interactive visualization a part of their simulation codes. Moreover, the Java programs are machine independent at the source level. Object oriented programming (OOP) methods used in Java programming will be useful for developing large scientific codes which includes number of modules with better maintenance ability. (author)

  19. Earthquake Disaster Risk Index for Cities: Baku, Yerevan, Tbilisi

    International Nuclear Information System (INIS)

    Varazanashvili, O.; Mammadli, T.; Nazaretyan, S.

    2005-01-01

    For comparative analysis of seismic risk in the capitals of the South Caucasian States - Baku, Yerevan and Tbilisi - the methodology of determination of earthquake disaster risk index (EDRI) has been used. Earthquake disaster risk indexes have been determined for considered cities. EDRI-analysis is performed, some peculiarities of main risk factors are revealed and risk portraits are made in each city of the given sample. (author)

  20. Stochastic strong motion generation using slip model of 21 and 22 May 1960 mega-thrust earthquakes in the main cities of Central-South Chile

    Science.gov (United States)

    Ruiz, S.; Ojeda, J.; DelCampo, F., Sr.; Pasten, C., Sr.; Otarola, C., Sr.; Silva, R., Sr.

    2017-12-01

    In May 1960 took place the most unusual seismic sequence registered instrumentally. The Mw 8.1, Concepción earthquake occurred May, 21, 1960. The aftershocks of this event apparently migrated to the south-east, and the Mw 9.5, Valdivia mega-earthquake occurred after 33 hours. The structural damage produced by both events is not larger than other earthquakes in Chile and lower than crustal earthquakes of smaller magnitude. The damage was located in the sites with shallow soil layers of low shear wave velocity (Vs). However, no seismological station recorded this sequence. For that reason, we generate synthetic acceleration times histories for strong motion in the main cities affected by these events. We use 155 points of vertical surface displacements recopiled by Plafker and Savage in 1968, and considering the observations of this authors and local residents we separated the uplift and subsidence information associated to the first earthquake Mw 8.1 and the second mega-earthquake Mw 9.5. We consider the elastic deformation propagation, assume realist lithosphere geometry, and compute a Bayesian method that maximizes the probability density a posteriori to obtain the slip distribution. Subsequently, we use a stochastic method of generation of strong motion considering the finite fault model obtained for both earthquakes. We considered the incidence angle of ray to the surface, free surface effect and energy partition for P, SV and SH waves, dynamic corner frequency and the influence of site effect. The results show that the earthquake Mw 8.1 occurred down-dip the slab, the strong motion records are similar to other Chilean earthquake like Tocopilla Mw 7.7 (2007). For the Mw 9.5 earthquake we obtain synthetic acceleration time histories with PGA values around 0.8 g in cities near to the maximum asperity or that have low velocity soil layers. This allows us to conclude that strong motion records have important influence of the shallow soil deposits. These records

  1. Certifiable Java for Embedded Systems

    DEFF Research Database (Denmark)

    Schoeberl, Martin; Dalsgaard, Andreas Engelbredt; Hansen, Rene Rydhof

    2014-01-01

    The Certifiable Java for Embedded Systems (CJ4ES) project aimed to develop a prototype development environment and platform for safety-critical software for embedded applications. There are three core constituents: A profile of the Java programming language that is tailored for safety......-critical applications, a predictable Java processor built with FPGA technology, and an Eclipse based application development environment that binds the profile and the platform together and provides analyses that help to provide evidence that can be used as part of a safety case. This paper summarizes key contributions...

  2. Earthquake Catalogue of the Caucasus

    Science.gov (United States)

    Godoladze, T.; Gok, R.; Tvaradze, N.; Tumanova, N.; Gunia, I.; Onur, T.

    2016-12-01

    The Caucasus has a documented historical catalog stretching back to the beginning of the Christian era. Most of the largest historical earthquakes prior to the 19th century are assumed to have occurred on active faults of the Greater Caucasus. Important earthquakes include the Samtskhe earthquake of 1283 (Ms˜7.0, Io=9); Lechkhumi-Svaneti earthquake of 1350 (Ms˜7.0, Io=9); and the Alaverdi earthquake of 1742 (Ms˜6.8, Io=9). Two significant historical earthquakes that may have occurred within the Javakheti plateau in the Lesser Caucasus are the Tmogvi earthquake of 1088 (Ms˜6.5, Io=9) and the Akhalkalaki earthquake of 1899 (Ms˜6.3, Io =8-9). Large earthquakes that occurred in the Caucasus within the period of instrumental observation are: Gori 1920; Tabatskuri 1940; Chkhalta 1963; Racha earthquake of 1991 (Ms=7.0), is the largest event ever recorded in the region; Barisakho earthquake of 1992 (M=6.5); Spitak earthquake of 1988 (Ms=6.9, 100 km south of Tbilisi), which killed over 50,000 people in Armenia. Recently, permanent broadband stations have been deployed across the region as part of the various national networks (Georgia (˜25 stations), Azerbaijan (˜35 stations), Armenia (˜14 stations)). The data from the last 10 years of observation provides an opportunity to perform modern, fundamental scientific investigations. In order to improve seismic data quality a catalog of all instrumentally recorded earthquakes has been compiled by the IES (Institute of Earth Sciences/NSMC, Ilia State University) in the framework of regional joint project (Armenia, Azerbaijan, Georgia, Turkey, USA) "Probabilistic Seismic Hazard Assessment (PSHA) in the Caucasus. The catalogue consists of more then 80,000 events. First arrivals of each earthquake of Mw>=4.0 have been carefully examined. To reduce calculation errors, we corrected arrivals from the seismic records. We improved locations of the events and recalculate Moment magnitudes in order to obtain unified magnitude

  3. Embedding Java Types in CPN Tools

    DEFF Research Database (Denmark)

    Lassen, Kristian Bisgaard; Westergaard, Michael

    the modeller to call methods on Java ob jects. This paper is about how the stub code is generated, i.e., representing Java classes to Standard ML to be able to call Java code in the CPN models, and how the BRITNeY Suite framework handles the invocations of the stub code. The contribution of this paper is give......CPN Tools is a well known editor for Colored Petri nets (CPNs) that is capable of doing state space and performance analysis. The BRITNeY Suite has added yet another feature to CPN Tools for integrating CPN models with Java programs, by providing stubs accessible from the models, to allow...

  4. Interrupt Handlers in Java

    DEFF Research Database (Denmark)

    Korsholm, Stephan; Schoeberl, Martin; Ravn, Anders Peter

    2008-01-01

    An important part of implementing device drivers is to control the interrupt facilities of the hardware platform and to program interrupt handlers. Current methods for handling interrupts in Java use a server thread waiting for the VM to signal an interrupt occurrence. It means that the interrupt...... is handled at a later time, which has some disadvantages. We present constructs that allow interrupts to be handled directly and not at a later point decided by a scheduler. A desirable feature of our approach is that we do not require a native middleware layer but can handle interrupts entirely with Java...... code. We have implemented our approach using an interpreter and a Java processor, and give an example demonstrating its use....

  5. Java Foundation Classes in a Nutshell Desktop Quick Reference

    CERN Document Server

    Flanagan, David

    1999-01-01

    Java Foundation Classes in a Nutshell is an indispensable quick reference for Java programmers who are writing applications that use graphics or graphical user interfaces. The author of the bestsellingJava in a Nutshell has written fast-paced introductions to the Java APIs that comprise the Java Foundation Classes (JFC), such as the Swing GUI components and Java 2D, so that you can start using these exciting new technologies right away. This book also includes O'Reilly's classic-style, quick-reference material for all of the classes in the javax.swing and java.awt packages and their numerous

  6. What role did the Hikurangi subduction zone play in the M7.8 Kaikoura earthquake?

    Science.gov (United States)

    Wallace, L. M.; Hamling, I. J.; Kaneko, Y.; Fry, B.; Clark, K.; Bannister, S. C.; Ellis, S. M.; Francois-Holden, C.; Hreinsdottir, S.; Mueller, C.

    2017-12-01

    The 2016 M7.8 Kaikoura earthquake ruptured at least a dozen faults in the northern South Island of New Zealand, within the transition from the Hikurangi subduction zone (in the North Island) to the transpressive Alpine Fault (in the central South Island). The role that the southern end of the Hikurangi subduction zone played (or did not play) in the Kaikoura earthquake remains one of the most controversial aspects of this spectacularly complex earthquake. Investigations using near-field seismological and geodetic data suggest a dominantly crustal faulting source for the event, while studies relying on teleseismic data propose that a large portion of the moment release is due to rupture of the Hikurangi subduction interface beneath the northern South Island. InSAR and GPS data also show that a large amount of afterslip (up to 0.5 m) occurred on the subduction interface beneath the crustal faults that ruptured in the M7.8 earthquake, during the months following the earthquake. Modeling of GPS velocities for the 20 year period prior to the earthquake indicate that interseismic coupling was occurring on the Hikurangi subduction interface beneath the northern South Island, in a similar location to the suggested coseismic and postseismic slip on the subduction interface. We will integrate geodetic, seismological, tsunami, and geological observations in an attempt to balance the seemingly conflicting views from local and teleseismic data regarding the role that the southern Hikurangi subduction zone played in the earthquake. We will also discuss the broader implications of the observed coseismic and postseismic deformation for understanding the kinematics of the southern termination of the Hikurangi subduction zone, and its role in the transition from subduction to strike-slip in the central New Zealand region.

  7. Jess, the Java expert system shell

    Energy Technology Data Exchange (ETDEWEB)

    Friedman-Hill, E.J.

    1997-11-01

    This report describes Jess, a clone of the popular CLIPS expert system shell written entirely in Java. Jess supports the development of rule-based expert systems which can be tightly coupled to code written in the powerful, portable Java language. The syntax of the Jess language is discussed, and a comprehensive list of supported functions is presented. A guide to extending Jess by writing Java code is also included.

  8. Distributed, Embedded and Real-time Java Systems

    CERN Document Server

    Wellings, Andy

    2012-01-01

    Research on real-time Java technology has been prolific over the past decade, leading to a large number of corresponding hardware and software solutions, and frameworks for distributed and embedded real-time Java systems.  This book is aimed primarily at researchers in real-time embedded systems, particularly those who wish to understand the current state of the art in using Java in this domain.  Much of the work in real-time distributed, embedded and real-time Java has focused on the Real-time Specification for Java (RTSJ) as the underlying base technology, and consequently many of the Chapters in this book address issues with, or solve problems using, this framework. Describes innovative techniques in: scheduling, memory management, quality of service and communication systems supporting real-time Java applications; Includes coverage of multiprocessor embedded systems and parallel programming; Discusses state-of-the-art resource management for embedded systems, including Java’s real-time garbage collect...

  9. Bringing Interactivity to the Web: The JAVA Solution.

    Science.gov (United States)

    Knee, Richard H.; Cafolla, Ralph

    Java is an object-oriented programming language of the Internet. It's popularity lies in its ability to create interactive Web sites across platforms. The most common Java programs are applications and applets, which adhere to a set of conventions that lets them run within a Java-compatible browser. Java is becoming an essential subject matter and…

  10. Tool-supported Refactoring for JavaScript

    DEFF Research Database (Denmark)

    Feldthaus, Asger; Millstein, Todd; Møller, Anders

    2011-01-01

    Script because of its dynamic nature. We propose a framework for specifying and implementing JavaScript refactorings based on pointer analysis. We describe novel refactorings motivated by best practice recommendations for JavaScript programming, and demonstrate how they can be described concisely in terms...... of queries provided by our framework. Experiments performed with a prototype implementation on a suite of existing applications show that our approach is well-suited for developing practical refactoring tools for JavaScript.......Refactoring is a popular technique for improving the structure of existing programs while maintaining their behavior. For statically typed programming languages such as Java, a wide variety of refactorings have been described, and tool support for performing refactorings and ensuring...

  11. Introduction: seismology and earthquake engineering in Mexico and Central and South America.

    Science.gov (United States)

    Espinosa, A.F.

    1982-01-01

    The results from seismological studies that are used by the engineering community are just one of the benefits obtained from research aimed at mitigating the earthquake hazard. In this issue of Earthquake Information Bulletin current programs in seismology and earthquake engineering, seismic networks, future plans and some of the cooperative programs with different internation organizations are described by Latin-American seismologists. The article describes the development of seismology in Latin America and the seismological interest of the OAS. -P.N.Chroston

  12. Java for dummies quick reference

    CERN Document Server

    Lowe, Doug

    2012-01-01

    A reference that answers your questions as you move through your coding The demand for Android programming and web apps continues to grow at an unprecedented pace and Java is the preferred language for both. Java For Dummies Quick Reference keeps you moving through your coding while you solve a problem, look up a command or syntax, or search for a programming tip. Whether you're a Java newbie or a seasoned user, this fast reference offers you quick access to solutions without requiring that you wade through pages of tutorial material. Leverages the true reference format that is organized with

  13. Learn Java for Android Development

    CERN Document Server

    Friesen, J

    2010-01-01

    Android development is hot, and many programmers are interested in joining the fun. However, because this technology is based on Java, you should first obtain a solid grasp of the Java language and its foundational APIs to improve your chances of succeeding as an Android app developer. After all, you will be busy learning the architecture of an Android app, the various Android-specific APIs, and Android-specific tools. If you do not already know Java fundamentals, you will probably end up with a massive headache from also having to quickly cram those fundamentals into your knowledge base. Lear

  14. The Crustal Structure of the North-South Earthquake Belt in China Revealed from Deep Seismic Soundings and Gravity Data

    Science.gov (United States)

    Zhao, Yang; Guo, Lianghui; Shi, Lei; Li, Yonghua

    2018-01-01

    The North-South earthquake belt (NSEB) is one of the major earthquake regions in China. The studies of crustal structure play a great role in understanding tectonic evolution and in evaluating earthquake hazards in this region. However, some fundamental crustal parameters, especially crustal interface structure, are not clear in this region. In this paper, we reconstructed the crustal interface structure around the NSEB based on both the deep seismic sounding (DSS) data and the gravity data. We firstly reconstructed the crustal structure of crystalline basement (interface G), interface between upper and lower crusts (interface C) and Moho in the study area by compiling the results of 38 DSS profiles published previously. Then, we forwardly calculated the gravity anomalies caused by the interfaces G and C, and then subtracted them from the complete Bouguer gravity anomalies, yielding the regional gravity anomalies mainly due to the Moho interface. We then utilized a lateral-variable density interface inversion technique with constraints of the DSS data to invert the regional anomalies for the Moho depth model in the study area. The reliability of our Moho depth model was evaluated by comparing with other Moho depth models derived from other gravity inversion technique and receiver function analysis. Based on our Moho depth model, we mapped the crustal apparent density distribution in the study area for better understanding the geodynamics around the NSEB.

  15. Probabilistic Approach to Provide Scenarios of Earthquake-Induced Slope Failures (PARSIFAL Applied to the Alcoy Basin (South Spain

    Directory of Open Access Journals (Sweden)

    Salvatore Martino

    2018-02-01

    Full Text Available The PARSIFAL (Probabilistic Approach to pRovide Scenarios of earthquake-Induced slope FAiLures approach was applied in the basin of Alcoy (Alicante, South Spain, to provide a comprehensive scenario of earthquake-induced landslides. The basin of Alcoy is well known for several historical landslides, mainly represented by earth-slides, that involve urban settlement as well as infrastructures (i.e., roads, bridges. The PARSIFAL overcomes several limits existing in other approaches, allowing the concomitant analyses of: (i first-time landslides (due to both rock-slope failures and shallow earth-slides and reactivations of existing landslides; (ii slope stability analyses of different failure mechanisms; (iii comprehensive mapping of earthquake-induced landslide scenarios in terms of exceedance probability of critical threshold values of co-seismic displacements. Geotechnical data were used to constrain the slope stability analysis, while specific field surveys were carried out to measure jointing and strength conditions of rock masses and to inventory already existing landslides. GIS-based susceptibility analyses were performed to assess the proneness to shallow earth-slides as well as to verify kinematic compatibility to planar or wedge rock-slides and to topples. The experienced application of PARSIFAL to the Alcoy basin: (i confirms the suitability of the approach at a municipality scale, (ii outputs the main role of saturation in conditioning slope instabilities in this case study, (iii demonstrates the reliability of the obtained results respect to the historical data.

  16. A Type Graph Model for Java Programs

    NARCIS (Netherlands)

    Rensink, Arend; Zambon, Eduardo

    2009-01-01

    In this report we present a type graph that models all executable constructs of the Java programming language. Such a model is useful for any graph-based technique that relies on a representation of Java programs as graphs. The model can be regarded as a common representation to which all Java

  17. Embedded Java security security for mobile devices

    CERN Document Server

    Debbabi, Mourad; Talhi, Chamseddine

    2007-01-01

    Java brings more functionality and versatility to the world of mobile devices, but it also introduces new security threats. This book contains a presentation of embedded Java security and presents the main components of embedded Java. It gives an idea of the platform architecture and is useful for researchers and practitioners.

  18. Preliminary results on landslides triggered by the Mw 7.8 Kaikoura earthquake of 14 November 2016 in northeast South Island, New Zealand

    Science.gov (United States)

    Gorum, Tolga; Yildirim, Cengiz

    2017-04-01

    This study presents the first results on analysis of the landslides triggered by the Mw 7.8 Kaikoura earthquake that occurred on November 14, 2016 in the region between the Hikurangi subduction system of the North Island and the oblique collisional regime of the South Island (Alpine Fault). The earthquake ruptured several faults that expand into two different tectonic domains which are compose of the strike-slip Marlborough fault system and the compressional North Canterbury Fault Zone. Here we present the preliminary mapping results of the distribution of landslides triggered by the earthquake. An extensive landslide interpretation was carried out using sets of optical high resolution satellite images (e.g. Sentinel-2 and Göktürk-2) for both the pre- and post-earthquake situation. The landslides were identified and mapped as polygons using multi-temporal visual image interpretation based on satellite imagery and morphological elements of landslide diagnostic indicators. Nearly 8,500 individual landslides with different sizes and types were mapped. The distribution pattern of the mapped coseismic landslides shows that the slope failures are highly concentrated along the ruptured faults and side slopes of the structurally controlled major rivers such as Hapuku and Clarence Rivers that drain the northeastern slopes of the region. Our spatial analysis of landslide occurrences with ground acceleration, lithology, slope, topographic relief and surface deformation indicated extensive control of steep slope and high topographic relief on landslides with ground acceleration as the trigger. We show that spatial distribution of slope failures shows decreasing frequency away from the earthquake faults up to 25 km towards east, and abundance of landslides spatially coincides with the coseismic fault geometries and aftershock distributions. We conclude that combined effect of complex rupture dynamics and topography primarily control the distribution pattern of the landslides

  19. A Type Graph Model for Java Programs

    NARCIS (Netherlands)

    Rensink, Arend; Zambon, Eduardo; Lee, D.; Lopes, A.; Poetzsch-Heffter, A.

    2009-01-01

    In this work we present a type graph that models all executable constructs of the Java programming language. Such a model is useful for any graph-based technique that relies on a representation of Java programs as graphs. The model can be regarded as a common representation to which all Java syntax

  20. Efficient Approximate JavaScript Call Graph Construction

    NARCIS (Netherlands)

    S. Benschop

    2014-01-01

    htmlabstractJavaScript has seen an increase in popularity in the last few years, both in the browser as well as on other platforms such as Node.js. However, the tools to help developers reason about JavaScript code remain fairly barebone in comparison with tooling for static languages such as Java.

  1. Declarative Programming in Java

    Directory of Open Access Journals (Sweden)

    Razvan DINA

    2014-03-01

    Full Text Available Despite the code is rarely self-explanatory, the imperative programming languages are the most commonly used in our days by the programmers all over the world and Java is definitely the lead language in popularity. This paper tries to conclude if there are any chances to use the most popular programming language of the moment in a declarative manner, even if Java itself is an intrinsic imperative language.

  2. Mastering JavaScript design patterns

    CERN Document Server

    Timms, Simon

    2014-01-01

    If you are a developer interested in creating easily maintainable applications that can grow and change with your needs, then this book is for you. Some experience with JavaScript (not necessarily with entire applications written in JavaScript) is required to follow the examples written in the book.

  3. Rupture distribution of the 1977 western Argentina earthquake

    Science.gov (United States)

    Langer, C.J.; Hartzell, S.

    1996-01-01

    Teleseismic P and SH body waves are used in a finite-fault, waveform inversion for the rupture history of the 23 November 1977 western Argentina earthquake. This double event consists of a smaller foreshock (M0 = 5.3 ?? 1026 dyn-cm) followed about 20 s later by a larger main shock (M0 = 1.5 ?? 1027 dyn-cm). Our analysis indicates that these two events occurred on different fault segments: with the foreshock having a strike, dip, and average rake of 345??, 45??E, and 50??, and the main shock 10??, 45??E, and 80??, respectively. The foreshock initiated at a depth of 17 km and propagated updip and to the north. The main shock initiated at the southern end of the foreshock zone at a depth of 25 to 30 km, and propagated updip and unilaterally to the south. The north-south separation of the centroids of the moment release for the foreshock and main shock is about 60 km. The apparent triggering of the main shock by the foreshock is similar to other earthquakes that have involved the failure of multiple fault segments, such as the 1992 Landers, California, earthquake. Such occurrences argue against the use of individual, mapped, surface fault or fault-segment lengths in the determination of the size and frequency of future earthquakes.

  4. Application of Java technology in radiation image processing

    International Nuclear Information System (INIS)

    Cheng Weifeng; Li Zheng; Chen Zhiqiang; Zhang Li; Gao Wenhuan

    2002-01-01

    The acquisition and processing of radiation image plays an important role in modern application of civil nuclear technology. The author analyzes the rationale of Java image processing technology which includes Java AWT, Java 2D and JAI. In order to demonstrate applicability of Java technology in field of image processing, examples of application of JAI technology in processing of radiation images of large container have been given

  5. Java in a Nutshell a Desktop Quick Reference

    CERN Document Server

    Flanagan, David

    2005-01-01

    With more than 700,000 copies sold to date, Java ina Nutshellfrom O'Reilly is clearly the favorite resource amongst the legion ofdevelopers and programmers using Java technology. And now, with therelease of the 5.0 version of Java, O'Reilly has given the book thatdefined the "in a Nutshell" category another impressive tune-up. In this latest revision, readers will find Java in aNutshell,5th Edition, does more than just cover the extensive changes implicit in5.0, the newest version of Java. It's undergone a complete makeover--inscope, size, and type of coverage--in order to more closely meet

  6. Java EE 7 recipes a problem-solution approach

    CERN Document Server

    Juneau, Josh

    2013-01-01

    Java EE 7 Recipes takes an example-based approach in showing how to program Enterprise Java applications in many different scenarios. Be it a small-business web application, or an enterprise database application, Java EE 7 Recipes provides effective and proven solutions to accomplish just about any task that you may encounter. You can feel confident using the reliable solutions that are demonstrated in this book in your personal or corporate environment. The solutions in Java EE 7 Recipes are built using the most current Java Enterprise specifications, including EJB 3.2, JSF 2.2, Expression La

  7. Geothermal and volcanism in west Java

    Science.gov (United States)

    Setiawan, I.; Indarto, S.; Sudarsono; Fauzi I, A.; Yuliyanti, A.; Lintjewas, L.; Alkausar, A.; Jakah

    2018-02-01

    Indonesian active volcanoes extend from Sumatra, Jawa, Bali, Lombok, Flores, North Sulawesi, and Halmahera. The volcanic arc hosts 276 volcanoes with 29 GWe of geothermal resources. Considering a wide distribution of geothermal potency, geothermal research is very important to be carried out especially to tackle high energy demand in Indonesia as an alternative energy sources aside from fossil fuel. Geothermal potency associated with volcanoes-hosted in West Java can be found in the West Java segment of Sunda Arc that is parallel with the subduction. The subduction of Indo-Australian oceanic plate beneath the Eurasian continental plate results in various volcanic products in a wide range of geochemical and mineralogical characteristics. The geochemical and mineralogical characteristics of volcanic and magmatic rocks associated with geothermal systems are ill-defined. Comprehensive study of geochemical signatures, mineralogical properties, and isotopes analysis might lead to the understanding of how large geothermal fields are found in West Java compared to ones in Central and East Java. The result can also provoke some valuable impacts on Java tectonic evolution and can suggest the key information for geothermal exploration enhancement.

  8. Injuries and Traumatic Psychological Exposures Associated with the South Napa Earthquake - California, 2014.

    Science.gov (United States)

    Attfield, Kathleen R; Dobson, Christine B; Henn, Jennifer B; Acosta, Meileen; Smorodinsky, Svetlana; Wilken, Jason A; Barreau, Tracy; Schreiber, Merritt; Windham, Gayle C; Materna, Barbara L; Roisman, Rachel

    2015-09-11

    On August 24, 2014, at 3:20 a.m., a magnitude 6.0 earthquake struck California, with its epicenter in Napa County (1). The earthquake was the largest to affect the San Francisco Bay area in 25 years and caused significant damage in Napa and Solano counties, including widespread power outages, five residential fires, and damage to roadways, waterlines, and 1,600 buildings (2). Two deaths resulted (2). On August 25, Napa County Public Health asked the California Department of Public Health (CDPH) for assistance in assessing postdisaster health effects, including earthquake-related injuries and effects on mental health. On September 23, Solano County Public Health requested similar assistance. A household-level Community Assessment for Public Health Emergency Response (CASPER) was conducted for these counties in two cities (Napa, 3 weeks after the earthquake, and Vallejo, 6 weeks after the earthquake). Among households reporting injuries, a substantial proportion (48% in Napa and 37% in western Vallejo) reported that the injuries occurred during the cleanup period, suggesting that increased messaging on safety precautions after a disaster might be needed. One fifth of respondents overall (27% in Napa and 9% in western Vallejo) reported one or more traumatic psychological exposures in their households. These findings were used by Napa County Mental Health to guide immediate-term mental health resource allocations and to conduct public training sessions and education campaigns to support persons with mental health risks following the earthquake. In addition, to promote community resilience and future earthquake preparedness, Napa County Public Health subsequently conducted community events on the earthquake anniversary and provided outreach workers with psychological first aid training.

  9. Java EE 7 development with NetBeans 8

    CERN Document Server

    Heffelfinger, David R

    2015-01-01

    The book is aimed at Java developers who wish to develop Java EE applications while taking advantage of NetBeans functionality to automate repetitive tasks. Familiarity with NetBeans or Java EE is not assumed.

  10. A modification of Java virtual machine for counting bytecode commands

    OpenAIRE

    Nikolaj, Janko

    2014-01-01

    The objective of the thesis was to implement or modify an existing Java virtual machine (JVM) in a way that it will allow insight into statistics of the executed Java instructions of an executed user program. The functionality will allow analysis of the algorithms in Java environment. After studying the theory of Java and Java virtual machine, we decided to modify an existing Java virtual machine. We chose JamVM which is a lightweight, open-source Java virtual machine under GNU license. The i...

  11. Delayed dynamic triggering of deep tremor along the Parkfield-Cholame section of the San Andreas Fault following the 2014 M6.0 South Napa earthquake

    Science.gov (United States)

    Peng, Zhigang; Shelly, David R.; Ellsworth, William L.

    2015-01-01

    Large, distant earthquakes are known to trigger deep tectonic tremor along the San Andreas Fault and in subduction zones. However, there are relatively few observations of triggering from regional distance earthquakes. Here we show that a small tremor episode about 12–18 km NW of Parkfield was triggered during and immediately following the passage of surface waves from the 2014 Mw 6.0 South Napa main shock. More notably, a major tremor episode followed, beginning about 12 h later, and centered SE of Parkfield near Cholame. This major episode is one of the largest seen over the past several years, containing intense activity for ~3 days and taking more than 3 weeks to return to background levels. This episode showed systematic along-strike migration at ~5 km/d, suggesting that it was driven by a slow-slip event. Our results suggest that moderate-size earthquakes are capable of triggering major tremor and deep slow slip at regional distances.

  12. JAVA PathFinder

    Science.gov (United States)

    Mehhtz, Peter

    2005-01-01

    JPF is an explicit state software model checker for Java bytecode. Today, JPF is a swiss army knife for all sort of runtime based verification purposes. This basically means JPF is a Java virtual machine that executes your program not just once (like a normal VM), but theoretically in all possible ways, checking for property violations like deadlocks or unhandled exceptions along all potential execution paths. If it finds an error, JPF reports the whole execution that leads to it. Unlike a normal debugger, JPF keeps track of every step how it got to the defect.

  13. Java Power Tools

    CERN Document Server

    Smart, John

    2008-01-01

    All true craftsmen need the best tools to do their finest work, and programmers are no different. Java Power Tools delivers 30 open source tools designed to improve the development practices of Java developers in any size team or organization. Each chapter includes a series of short articles about one particular tool -- whether it's for build systems, version control, or other aspects of the development process -- giving you the equivalent of 30 short reference books in one package. No matter which development method your team chooses, whether it's Agile, RUP, XP, SCRUM, or one of many other

  14. Java I/O

    CERN Document Server

    Harold, Elliotte Rusty

    2006-01-01

    All of Java's Input/Output (I/O) facilities are based on streams, which provide simple ways to read and write data of different types. Java provides many different kinds of streams, each with its own application. The universe of streams is divided into four largecategories: input streams and output streams, for reading and writing binary data; and readers and writers, for reading and writing textual (character) data. You're almost certainly familiar with the basic kinds of streams--but did you know that there's a CipherInputStream for reading encrypted data? And a ZipOutputStream for automati

  15. Learn Objective-C for Java Developers

    CERN Document Server

    Bucanek, James

    2009-01-01

    Learn Objective-C for Java Developers will guide experienced Java developers into the world of Objective-C. It will show them how to take their existing language knowledge and design patterns and transfer that experience to Objective-C and the Cocoa runtime library. This is the express train to productivity for every Java developer who dreamt of developing for Mac OS X or iPhone, but felt that Objective-C was too intimidating. So hop on and enjoy the ride!

  16. A safety-critical java technology compatibility kit

    DEFF Research Database (Denmark)

    Søndergaard, Hans; Korsholm, Stephan E.; Ravn, Anders Peter

    2014-01-01

    In order to claim conformance with a given Java Specification Request (JSR), a Java implementation has to pass all tests in an associated Technology Compatibility Kit (TCK). This paper presents development of test cases and tools for the draft Safety-Critical Java (SCJ) specification. In previous...... work we have shown how the Java Modeling Language (JML) is applied to specify conformance constraints for SCJ, and how JML-related tools may assist in generating and executing tests. Here we extend this work with a layout for concrete test cases including checking of results in a simplified version...

  17. JavaScript & jQuery The Missing Manual

    CERN Document Server

    McFarland, David

    2011-01-01

    JavaScript lets you supercharge your HTML with animation, interactivity, and visual effects-but many web designers find the language hard to learn. This jargon-free guide covers JavaScript basics and shows you how to save time and effort with the jQuery library of prewritten JavaScript code. You'll soon be building web pages that feel and act like desktop programs, without having to do much programming. The important stuff you need to know: Make your pages interactive. Create JavaScript events that react to visitor actions.Use animations and effects. Build drop-down navigation menus, pop-ups

  18. A predictable Java profile - rationale and implementations

    DEFF Research Database (Denmark)

    Søndergaard, Hans; Bøgholm, Thomas; Hansen, Rene Rydhof

    A Java profile suitable for development of high integrity embedded systems is presented. It is based on event handlers which are grouped in missions and equipped with respectively private handler memory and shared mission memory. This is a result of our previous work on developing a Java profile......, and is directly inspired by interactions with the Open Group on their on-going work on a safety critical Java profile (JSR-302). The main contribution is an arrangement of the class hierarchy such that the proposal is a generalization of Real-Time Specification for Java (RTSJ). A further contribution...

  19. Designing Abstractions for JavaScript Program Analysis

    DEFF Research Database (Denmark)

    Andreasen, Esben Sparre

    JavaScript is a widely used dynamic programming language. What started out as a client-side scripting language for browsers, is now used for large applications in many different settings. As for other dynamic languages, JavaScript makes it easy to write programs quickly without being constrained...... by the language, and programmers exploit that power to write highly dynamic programs. Automated tools for helping programmers and optimizing programs are used successfully for many programming languages. Unfortunately, the automated tools for JavaScript are not as good as for other programming languages....... The program analyses, that the automated tools are built upon, are poorly suited to deal with the highly dynamic nature of JavaScript programs. The lack of language restrictions on the programmer are detrimental to the quality of program analyses for JavaScript. The aim of this dissertation is to address...

  20. Formalising Java safety -- An overview

    NARCIS (Netherlands)

    Hartel, Pieter H.; Domingo-Ferrer, J; Chan, D.; Watson, A.

    We review the existing literature on Java safety, emphasizing formal approaches, and the impact of Java safety on small footprint devices such as smart cards. The conclusion is that while a lot of good work has been done, a more concerted effort is needed to build a coherent set of machine readable

  1. Trichosanthes L. (Cucurbitaceae) in Java

    NARCIS (Netherlands)

    Wilde, de Rugayah; Wilde, de W.J.J.O.

    1997-01-01

    As compared with the treatment in the Flora of Java (Backer in Backer & Bakhuizen van den Brink, 1963) with 8 species, a recent review of the genus Trichosanthes in Java resulted in the acceptance of 10 species for this island. Important changes are: the name T. trifolia has to be replaced by a

  2. High-Performance Java Codes for Computational Fluid Dynamics

    Science.gov (United States)

    Riley, Christopher; Chatterjee, Siddhartha; Biswas, Rupak; Biegel, Bryan (Technical Monitor)

    2001-01-01

    The computational science community is reluctant to write large-scale computationally -intensive applications in Java due to concerns over Java's poor performance, despite the claimed software engineering advantages of its object-oriented features. Naive Java implementations of numerical algorithms can perform poorly compared to corresponding Fortran or C implementations. To achieve high performance, Java applications must be designed with good performance as a primary goal. This paper presents the object-oriented design and implementation of two real-world applications from the field of Computational Fluid Dynamics (CFD): a finite-volume fluid flow solver (LAURA, from NASA Langley Research Center), and an unstructured mesh adaptation algorithm (2D_TAG, from NASA Ames Research Center). This work builds on our previous experience with the design of high-performance numerical libraries in Java. We examine the performance of the applications using the currently available Java infrastructure and show that the Java version of the flow solver LAURA performs almost within a factor of 2 of the original procedural version. Our Java version of the mesh adaptation algorithm 2D_TAG performs within a factor of 1.5 of its original procedural version on certain platforms. Our results demonstrate that object-oriented software design principles are not necessarily inimical to high performance.

  3. Landslides triggered by the 1946 Ancash earthquake, Peru

    Science.gov (United States)

    Kampherm, T. S.; Evans, S. G.; Valderrama Murillo, P.

    2009-04-01

    The 1946 M7.3 Ancash Earthquake triggered a large number of landslides in an epicentral area that straddled the Continental Divide of South America in the Andes of Peru. A small number of landslides were described in reconnaissance reports by E. Silgado and Arnold Heim published shortly after the earthquake, but further details of the landslides triggered by the earthquake have not been reported since. Utilising field traverses, aerial photograph interpretation and GIS, our study mapped 45 landslides inferred to have been triggered by the event. 83% were rock avalanches involving Cretaceous limestones interbedded with shales. The five largest rock/debris avalanches occurred at Rio Llama (est. vol. 37 M m3), Suytucocha (est. vol., 13.5 Mm3), Quiches (est. vol. 10.5 Mm3 ), Pelagatos (est. vol. 8 Mm3), and Shundoy (est. vol. 8 Mm3). The Suytucocha, Quiches, and Pelagatos landslides were reported by Silgado and Heim. Rock slope failure was most common on slopes with a southwest aspect, an orientation corresponding to the regional dip direction of major planar structures in the Andean foreland belt (bedding planes and thrust faults). In valleys oriented transverse to the NW-SE structural grain of the epicentral area, south-westerly dipping bedding planes combined with orthogonal joint sets to form numerous wedge failures. Many initial rock slope failures were transformed into rock/debris avalanches by the entrainment of colluvium in their path. At Acobamba, a rock avalanche that transformed into a debris avalanche (est. vol. 4.3 Mm3) overwhelmed a village resulting in the deaths of 217 people. The cumulative volume-frequency plot shows a strong power law relation below a marked rollover, similar in form to that derived for landslides triggered by the 1994 Northridge Earthquake. The total volume of the 45 landslides is approximately 93 Mm3. The data point for the Ancash Earthquake plots near the regression line calculated by Keefer (1994), and modified by Malamud et al

  4. JPP: A Java Pre-Processor

    OpenAIRE

    Kiniry, Joseph R.; Cheong, Elaine

    1998-01-01

    The Java Pre-Processor, or JPP for short, is a parsing pre-processor for the Java programming language. Unlike its namesake (the C/C++ Pre-Processor, cpp), JPP provides functionality above and beyond simple textual substitution. JPP's capabilities include code beautification, code standard conformance checking, class and interface specification and testing, and documentation generation.

  5. JavaScript domain-driven design

    CERN Document Server

    Fehre, Philipp

    2015-01-01

    If you are an experienced JavaScript developer who wants to improve the design of his or her applications, or find yourself in a situation to implement an application in an unfamiliar domain, this book is for you. Prior knowledge of JavaScript is required and prior experience with Node.js will also be helpful.

  6. THE NATURE, THE BEAUTY AND THE DIFFICULTY IN JAVA PROGRAMMING

    Directory of Open Access Journals (Sweden)

    Dror BENAMI

    2016-12-01

    Full Text Available JAVA language in recent years is widely used for the reason that integrates multiple information technologies. JAVA benefits are not fully exploited. The article discusses some aspects of the design of Data Mining algorithms in Java.JAVA: NATURA, FRUMUSEŢEA ŞI DIFICULTĂTILE PROGRAMĂRIILimbajul JAVA în ultimii ani se utilizează pe scară largă dat fiind că integrează mai multe tehnologii informaţionale. Avantajele JAVA nu sunt pe deplin exploatate. În articol sunt discutate unele aspecte de proiectare a algoritmilor de Data Mining în limbajul JAVA.

  7. The ENSDF Java Package

    International Nuclear Information System (INIS)

    Sonzogni, A.A.

    2005-01-01

    A package of computer codes has been developed to process and display nuclear structure and decay data stored in the ENSDF (Evaluated Nuclear Structure Data File) library. The codes were written in an object-oriented fashion using the java language. This allows for an easy implementation across multiple platforms as well as deployment on web pages. The structure of the different java classes that make up the package is discussed as well as several different implementations

  8. Buried shallow fault slip from the South Napa earthquake revealed by near-field geodesy.

    Science.gov (United States)

    Brooks, Benjamin A; Minson, Sarah E; Glennie, Craig L; Nevitt, Johanna M; Dawson, Tim; Rubin, Ron; Ericksen, Todd L; Lockner, David; Hudnut, Kenneth; Langenheim, Victoria; Lutz, Andrew; Mareschal, Maxime; Murray, Jessica; Schwartz, David; Zaccone, Dana

    2017-07-01

    Earthquake-related fault slip in the upper hundreds of meters of Earth's surface has remained largely unstudied because of challenges measuring deformation in the near field of a fault rupture. We analyze centimeter-scale accuracy mobile laser scanning (MLS) data of deformed vine rows within ±300 m of the principal surface expression of the M (magnitude) 6.0 2014 South Napa earthquake. Rather than assuming surface displacement equivalence to fault slip, we invert the near-field data with a model that allows for, but does not require, the fault to be buried below the surface. The inversion maps the position on a preexisting fault plane of a slip front that terminates ~3 to 25 m below the surface coseismically and within a few hours postseismically. The lack of surface-breaching fault slip is verified by two trenches. We estimate near-surface slip ranging from ~0.5 to 1.25 m. Surface displacement can underestimate fault slip by as much as 30%. This implies that similar biases could be present in short-term geologic slip rates used in seismic hazard analyses. Along strike and downdip, we find deficits in slip: The along-strike deficit is erased after ~1 month by afterslip. We find no evidence of off-fault deformation and conclude that the downdip shallow slip deficit for this event is likely an artifact. As near-field geodetic data rapidly proliferate and will become commonplace, we suggest that analyses of near-surface fault rupture should also use more sophisticated mechanical models and subsurface geomechanical tests.

  9. Buried shallow fault slip from the South Napa earthquake revealed by near-field geodesy

    Science.gov (United States)

    Brooks, Benjamin A.; Minson, Sarah E.; Glennie, Craig L.; Nevitt, Johanna M.; Dawson, Tim; Rubin, Ron; Ericksen, Todd L.; Lockner, David; Hudnut, Kenneth; Langenheim, Victoria; Lutz, Andrew; Mareschal, Maxime; Murray, Jessica; Schwartz, David; Zaccone, Dana

    2017-01-01

    Earthquake-related fault slip in the upper hundreds of meters of Earth’s surface has remained largely unstudied because of challenges measuring deformation in the near field of a fault rupture. We analyze centimeter-scale accuracy mobile laser scanning (MLS) data of deformed vine rows within ±300 m of the principal surface expression of the M (magnitude) 6.0 2014 South Napa earthquake. Rather than assuming surface displacement equivalence to fault slip, we invert the near-field data with a model that allows for, but does not require, the fault to be buried below the surface. The inversion maps the position on a preexisting fault plane of a slip front that terminates ~3 to 25 m below the surface coseismically and within a few hours postseismically. The lack of surface-breaching fault slip is verified by two trenches. We estimate near-surface slip ranging from ~0.5 to 1.25 m. Surface displacement can underestimate fault slip by as much as 30%. This implies that similar biases could be present in short-term geologic slip rates used in seismic hazard analyses. Along strike and downdip, we find deficits in slip: The along-strike deficit is erased after ~1 month by afterslip. We find no evidence of off-fault deformation and conclude that the downdip shallow slip deficit for this event is likely an artifact. As near-field geodetic data rapidly proliferate and will become commonplace, we suggest that analyses of near-surface fault rupture should also use more sophisticated mechanical models and subsurface geomechanical tests. PMID:28782026

  10. An Evaluation of Java for Numerical Computing

    Directory of Open Access Journals (Sweden)

    Brian Blount

    1999-01-01

    Full Text Available This paper describes the design and implementation of high performance numerical software in Java. Our primary goals are to characterize the performance of object‐oriented numerical software written in Java and to investigate whether Java is a suitable language for such endeavors. We have implemented JLAPACK, a subset of the LAPACK library in Java. LAPACK is a high‐performance Fortran 77 library used to solve common linear algebra problems. JLAPACK is an object‐oriented library, using encapsulation, inheritance, and exception handling. It performs within a factor of four of the optimized Fortran version for certain platforms and test cases. When used with the native BLAS library, JLAPACK performs comparably with the Fortran version using the native BLAS library. We conclude that high‐performance numerical software could be written in Java if a handful of concerns about language features and compilation strategies are adequately addressed.

  11. Necessity of management for minor earthquake to improve public acceptance of nuclear energy in South Korea

    Directory of Open Access Journals (Sweden)

    Hyun-Tae Choi

    2018-04-01

    Full Text Available As public acceptance of nuclear energy in Korea worsens due to the Fukushima accident and the earthquakes that occurred in the Gyeongju area near the Wolsong nuclear power plant (NPP, estimating the effects of earthquakes has become more essential for the nuclear industry. Currently, most countermeasures against earthquakes are limited to large-scale disasters. Minor-scale earthquakes used to be ignored. Even though people do not feel the shaking due to minor earthquakes and minor earthquakes incur little damage to NPPs, they can change the environmental conditions, for instance, underground water level and the conductivity of the groundwater. This study conducted a questionnaire survey of residents living in the vicinity of an NPP to determine their perception and acceptance of plant safety against minor earthquakes. The results show that the residents feel earthquakes at levels that can be felt by people, but incur little damage to NPPs, as minor earthquakes (magnitude of 2.0–3.9 and set this level as a standard for countermeasures. Even if a minor earthquake has little impact on the safety of an NPP, there is still a possibility that public opinion will get worse. This study provides analysis results about problems of earthquake measures of Korean NPPs and specific things that can bring about an effect of deterioration of public acceptance. Based on these data, this article suggests that active management of minor earthquakes is necessary for the sustainability of nuclear energy. Keywords: Earthquake Measures, Management, Minor Earthquake, Nuclear Energy, Public Acceptance

  12. JLAPACK – Compiling LAPACK FORTRAN to Java

    Directory of Open Access Journals (Sweden)

    David M. Doolin

    1999-01-01

    Full Text Available The JLAPACK project provides the LAPACK numerical subroutines translated from their subset Fortran 77 source into class files, executable by the Java Virtual Machine (JVM and suitable for use by Java programmers. This makes it possible for Java applications or applets, distributed on the World Wide Web (WWW to use established legacy numerical code that was originally written in Fortran. The translation is accomplished using a special purpose Fortran‐to‐Java (source‐to‐source compiler. The LAPACK API will be considerably simplified to take advantage of Java’s object‐oriented design. This report describes the research issues involved in the JLAPACK project, and its current implementation and status.

  13. Natural language processing with Java

    CERN Document Server

    Reese, Richard M

    2015-01-01

    If you are a Java programmer who wants to learn about the fundamental tasks underlying natural language processing, this book is for you. You will be able to identify and use NLP tasks for many common problems, and integrate them in your applications to solve more difficult problems. Readers should be familiar/experienced with Java software development.

  14. A Hardware Abstraction Layer in Java

    DEFF Research Database (Denmark)

    Schoeberl, Martin; Korsholm, Stephan; Kalibera, Tomas

    2011-01-01

    Embedded systems use specialized hardware devices to interact with their environment, and since they have to be dependable, it is attractive to use a modern, type-safe programming language like Java to develop programs for them. Standard Java, as a platform-independent language, delegates access...... to devices, direct memory access, and interrupt handling to some underlying operating system or kernel, but in the embedded systems domain resources are scarce and a Java Virtual Machine (JVM) without an underlying middleware is an attractive architecture. The contribution of this article is a proposal...... for Java packages with hardware objects and interrupt handlers that interface to such a JVM. We provide implementations of the proposal directly in hardware, as extensions of standard interpreters, and finally with an operating system middleware. The latter solution is mainly seen as a migration path...

  15. Java Card for PayTv Application

    OpenAIRE

    Dutta, Pallab

    2013-01-01

    Smart cards are widely used along with PayTV receivers to store secret user keys and to perform security functions to prevent any unauthorized viewing of PayTV channels. Java Card technology enables programs written in the Java programming language to run on smart cards. Smart cards represent one of the smallest computing platforms in use today. The memory configuration of a smart card are of the order of 4K of RAM, 72K of EEPROM, and 24K of ROM. Using Java card provides advantages to the ind...

  16. Efficient Incremental Checkpointing of Java Programs

    DEFF Research Database (Denmark)

    Lawall, Julia Laetitia; Muller, Gilles

    2000-01-01

    This paper investigates the optimization of language-level checkpointing of Java programs. First, we describe how to systematically associate incremental checkpoints with Java classes. While being safe, the genericness of this solution induces substantial execution overhead. Second, to solve...

  17. Java EE 7 with GlassFish 4 Application Server

    CERN Document Server

    Heffelfinger, David R

    2014-01-01

    This book is a practical guide and follows a very user-friendly approach. The book aims to get the reader up to speed in Java EE 7 development. All major Java EE 7 APIs and the details of the GlassFish 4 server are covered followed by examples of their use.If you are a Java developers who wants to become proficient with Java EE 7 this book is ideal for you. Readers are expected to have some experience with Java and to have developed and deployed applications in the past, but don't need any previous knowledge of Java EE or J2EE. It teaches the reader how to use GlassFish 4 to develop and deploy

  18. Source modeling of the 2015 Mw 7.8 Nepal (Gorkha) earthquake sequence: Implications for geodynamics and earthquake hazards

    Science.gov (United States)

    McNamara, D. E.; Yeck, W. L.; Barnhart, W. D.; Schulte-Pelkum, V.; Bergman, E.; Adhikari, L. B.; Dixit, A.; Hough, S. E.; Benz, H. M.; Earle, P. S.

    2017-09-01

    The Gorkha earthquake on April 25th, 2015 was a long anticipated, low-angle thrust-faulting event on the shallow décollement between the India and Eurasia plates. We present a detailed multiple-event hypocenter relocation analysis of the Mw 7.8 Gorkha Nepal earthquake sequence, constrained by local seismic stations, and a geodetic rupture model based on InSAR and GPS data. We integrate these observations to place the Gorkha earthquake sequence into a seismotectonic context and evaluate potential earthquake hazard. Major results from this study include (1) a comprehensive catalog of calibrated hypocenters for the Gorkha earthquake sequence; (2) the Gorkha earthquake ruptured a 150 × 60 km patch of the Main Himalayan Thrust (MHT), the décollement defining the plate boundary at depth, over an area surrounding but predominantly north of the capital city of Kathmandu (3) the distribution of aftershock seismicity surrounds the mainshock maximum slip patch; (4) aftershocks occur at or below the mainshock rupture plane with depths generally increasing to the north beneath the higher Himalaya, possibly outlining a 10-15 km thick subduction channel between the overriding Eurasian and subducting Indian plates; (5) the largest Mw 7.3 aftershock and the highest concentration of aftershocks occurred to the southeast the mainshock rupture, on a segment of the MHT décollement that was positively stressed towards failure; (6) the near surface portion of the MHT south of Kathmandu shows no aftershocks or slip during the mainshock. Results from this study characterize the details of the Gorkha earthquake sequence and provide constraints on where earthquake hazard remains high, and thus where future, damaging earthquakes may occur in this densely populated region. Up-dip segments of the MHT should be considered to be high hazard for future damaging earthquakes.

  19. JavaScript Cookbook

    CERN Document Server

    Powers, Shelley

    2010-01-01

    Why reinvent the wheel every time you run into a problem with JavaScript? This cookbook is chock-full of code recipes that address common programming tasks, as well as techniques for building web apps that work in any browser. Just copy and paste the code samples into your project -- you'll get the job done faster and learn more about JavaScript in the process. You'll also learn how to take advantage of the latest features in ECMAScript 5 and HTML5, including the new cross-domain widget communication technique, HTML5's video and audio elements, and the drawing canvas. You'll find recipes for

  20. OpenCV 3.0 computer vision with Java

    CERN Document Server

    Baggio, Daniel Lélis

    2015-01-01

    If you are a Java developer, student, researcher, or hobbyist wanting to create computer vision applications in Java then this book is for you. If you are an experienced C/C++ developer who is used to working with OpenCV, you will also find this book very useful for migrating your applications to Java. All you need is basic knowledge of Java, with no prior understanding of computer vision required, as this book will give you clear explanations and examples of the basics.

  1. Foreshocks and aftershocks locations of the 2014 Pisagua, N. Chile earthquake: history of a megathrust earthquake nucleation

    Science.gov (United States)

    Fuenzalida Velasco, Amaya; Rietbrock, Andreas; Tavera, Hernando; Ryder, Isabelle; Ruiz, Sergio; Thomas, Reece; De Angelis, Silvio; Bondoux, Francis

    2015-04-01

    The April 2014 Mw 8.1 Pisagua earthquake occurred in the Northern Chile seismic gap: a region of the South American subduction zone lying between Arica city and the Mejillones Peninsula. It is believed that this part of the subduction zone has not experienced a large earthquake since 1877. Thanks to the identification of this seismic gap, the north of Chile was well instrumented before the Pisagua earthquake, including the Integrated Plate boundary Observatory Chile (IPOC) network and the Chilean local network installed by the Centro Sismologico Nacional (CSN). These instruments were able to record the full foreshock and aftershock sequences, allowing a unique opportunity to study the nucleation process of large megathrust earthquakes. To improve azimuthal coverage of the Pisagua seismic sequence, after the earthquake, in collaboration with the Instituto Geofisico del Peru (IGP) we installed a temporary seismic network in south of Peru. The network comprised 12 short-period stations located in the coastal area between Moquegua and Tacna and they were operative from 1st May 2014. We also installed three stations on the slopes of the Ticsiani volcano to monitor any possible change in volcanic activity following the Pisagua earthquake. In this work we analysed the continuous seismic data recorded by CSN and IPOC networks from 1 March to 30 June to obtain the catalogue of the sequence, including foreshocks and aftershocks. Using an automatic algorithm based in STA/LTA we obtained the picks for P and S waves. Association in time and space defined the events and computed an initial location using Hypo71 and the 1D local velocity model. More than 11,000 events were identified with this method for the whole period, but we selected the best resolved events that include more than 7 observed arrivals with at least 2 S picks of them, to relocate these events using NonLinLoc software. For the main events of the sequence we carefully estimate event locations and we obtained

  2. A desktop 3D printer in safety-critical Java

    DEFF Research Database (Denmark)

    Strøm, Tórur Biskopstø; Schoeberl, Martin

    2012-01-01

    there exist several safety-critical Java framework implementations, there is a lack of safety-critical use cases implemented according to the specification. In this paper we present a 3D printer and its safety-critical Java level 1 implementation as a use case. With basis in the implementation we evaluate......It is desirable to bring Java technology to safety-critical systems. To this end The Open Group has created the safety-critical Java specification, which will allow Java applications, written according to the specification, to be certifiable in accordance with safety-critical standards. Although...

  3. Development of Remote Inspection Systems with the Java Applet

    International Nuclear Information System (INIS)

    Choi, Yoo Rark; Lee, Jae Cheol; Kim, Jae Hee

    2005-01-01

    The world wide web and java are powerful networking technologies on the internet. An applet is a program written in the java programming language that can be included in an HTML page, much in the same way as an image is included. When we use a Java technology-enabled browser to view a page that contains an applet, the applet code is transferred to a client's system and executed by the browser's Java Virtual Machine (JVM). We have developed two remote inspection systems for a reactor wall inspection and guide tube spilt pin inspection based on the java and traditional programming language. The java is used on a GUI(graphic user interface) and the traditional visual C++ programming language is used to control the inspection equipments

  4. Towards an Existential Types Model for Java with Wildcards

    DEFF Research Database (Denmark)

    Cameron, Nicholas; Drossopoulou, Sophia; Ernst, Erik

    2007-01-01

    Wildcards extend Java generics by softening the mismatch between subtype and parametric polymorphism. Although they are a key part of the Java 5.0 programming language, a type system including wildcards has never been proven type sound. Wildcards have previously been formalised as existential types....... In this paper we extend FGJ, a featherweight formalisation of Java with generics, with existential types. We prove that this calculus, ExistsJ, is type sound, and illustrate how it models wildcards in the Java Programming Language. ExistsJ is not a full model for Java wildcards, because it does not support...... lower bounds for wildcards. We discuss why ExistsJ can not be easily extended with lower bounds, and how full Java wildcards could be modelled in a type sound way....

  5. Modified-Fibonacci-Dual-Lucas method for earthquake prediction

    Science.gov (United States)

    Boucouvalas, A. C.; Gkasios, M.; Tselikas, N. T.; Drakatos, G.

    2015-06-01

    The FDL method makes use of Fibonacci, Dual and Lucas numbers and has shown considerable success in predicting earthquake events locally as well as globally. Predicting the location of the epicenter of an earthquake is one difficult challenge the other being the timing and magnitude. One technique for predicting the onset of earthquakes is the use of cycles, and the discovery of periodicity. Part of this category is the reported FDL method. The basis of the reported FDL method is the creation of FDL future dates based on the onset date of significant earthquakes. The assumption being that each occurred earthquake discontinuity can be thought of as a generating source of FDL time series The connection between past earthquakes and future earthquakes based on FDL numbers has also been reported with sample earthquakes since 1900. Using clustering methods it has been shown that significant earthquakes (conjunct Sun, Moon opposite Sun, Moon conjunct or opposite North or South Modes. In order to test improvement of the method we used all +8R earthquakes recorded since 1900, (86 earthquakes from USGS data). We have developed the FDL numbers for each of those seeds, and examined the earthquake hit rates (for a window of 3, i.e. +-1 day of target date) and for <6.5R. The successes are counted for each one of the 86 earthquake seeds and we compare the MFDL method with the FDL method. In every case we find improvement when the starting seed date is on the planetary trigger date prior to the earthquake. We observe no improvement only when a planetary trigger coincided with the earthquake date and in this case the FDL method coincides with the MFDL. Based on the MDFL method we present the prediction method capable of predicting global events or localized earthquakes and we will discuss the accuracy of the method in as far as the prediction and location parts of the method. We show example calendar style predictions for global events as well as for the Greek region using

  6. Earthquakes, gravity, and the origin of the Bali Basin: An example of a Nascent Continental Fold-and-Thrust Belt

    Science.gov (United States)

    McCaffrey, Robert; Nabelek, John

    1987-01-01

    We infer from the bathymetry and gravity field and from the source mechanisms and depths of the eight largest earthquakes in the Bali region that the Bali Basin is a downwarp in the crust of the Sunda Shelf produced and maintained by thrusting along the Flores back arc thrust zone. Earthquake source mechanisms and focal depths are inferred from the inversion of long-period P and SH waves for all events and short-period P waves for two of the events. Centroidal depths that give the best fit to the seismograms range from 10 to 18 km, but uncertainties in depth allow a range from 7 to 24 km. The P wave nodal planes that dip south at 13° to 35° (±7°) strike roughly parallel to the volcanic arc and are consistent with thrusting of crust of the Bali Basin beneath it. The positions of the earthquakes with respect to crustal features inferred from seismic and gravity data suggest that the earthquakes occur in the basement along the western end of the Flores thrust zone. The slip direction for the back arc thrust zone inferred from the orientation of the earthquake slip vectors indicates that the thrusting in the Bali Basin is probably part of the overall plate convergence, as it roughly coincides with the convergence direction between the Sunda arc and the Indian Ocean plate. Summation of seismic moments of earthquakes between 1960 and 1985 suggests a minimum rate of convergence across the thrust zone of 4 ± 2 mm/a. The presence of back arc thrusting suggests that some coupling between the Indian Ocean plate and the Sunda arc occurs but mechanisms such as continental collision or a shallow subduction of the Indian Ocean plate probably can be ruled out. The present tectonic setting and structure of the Bali Basin is comparable to the early forelands of the Andes or western North America in that a fold-and-thrust belt is forming on the continental side of an arc-trench system at which oceanic lithosphere is being subducted. The Bali Basin is flanked by the Tertiary Java

  7. Studi Hubungan Budaya dengan Aglomerasi Ekonomi (North-South Corridor Di Jawa Timur

    Directory of Open Access Journals (Sweden)

    Rachmad Kresna Sakti

    2012-05-01

    Full Text Available ABSTRACT   There are two things that commonly identify economic activitivities spacially such as concentration and imbalance.  East Java has two concentration poles of Java economic activities spacially. One of the concentration areas in East Java is in Surabaya, and that concentration activity is called North-South Corridor which is close to temple/ archeological site in East Java. Based on the fact, this research answers some questions like (1 Is there any interaction between culture dimension (the people and economic dimension? (2 How does culture dimension interacts with economic dimension? The aims of the research are (a To know the interaction between culture dimension (the people and economic dimension partially and cumulatively, so there will be North-South Corridor in East Java; (b To know the flow of mechanism from the detail of culture dimension interacting with economic dimension. The research was done outside North-South Corridor  area in East Java. The result of the research shows (1 there is a relationship between culture and economic dimension. It can be showed from the difference of each economic subject both inside and outside North-South Corridor in facing Hofstede Culture; (2 the difference of culture is formed by the environment of area inside and outside North-South Corridor.   Keywords: North-South Corridor, culture, economic concentration   ABSTRAKS   Terdapat dua hal yang seringkali menjadi ciri menonjol dari kegiatan perekonomian secara spasial, yaitu adanya konsentrasi dan ketimpangan. Di Pulau Jawa Terdapat dua kutub konsentrasi kegiatan ekonomi di Jawa secara spasial. Salah satunya wilayah konsentrasi kegiatan ekonomi di Surabaya Jawa Timur. Konsentrasi kegiatan tersebut dikenal dengan koridor utara – selatan. Menariknya koridor Utara-Selatan berhimpit dengan letak situs purbakala/candi di Jawa Timur.  Berpijak pada kesenjangan realita tersebut, penelitan ini berusaha menjawab pertanyaan berikut, (1 apakah

  8. Visualization Software for VisIT Java Client

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-01

    The VisIT Java Client (JVC) library is a lightweight thin client that is designed and written purely in the native language of Java (the Python & JavaScript versions of the library use the same concept) and communicates with any new unmodified standalone version of VisIT, a high performance computing parallel visualization toolkit, over traditional or web sockets and dynamically determines capabilities of the running VisIT instance whether local or remote.

  9. Conformance test development with the Java modeling language

    DEFF Research Database (Denmark)

    Søndergaard, Hans; Korsholm, Stephan E.; Ravn, Anders P.

    2017-01-01

    In order to claim conformance with a Java Specification Request, a Java implementation has to pass all tests in an associated Technology Compatibility Kit (TCK). This paper presents a model-based development of a TCK test suite and a test execution tool for the draft Safety-Critical Java (SCJ......) profile specification. The Java Modeling Language (JML) is used to model conformance constraints for the profile. JML annotations define contracts for classes and interfaces. The annotations are translated by a tool into runtime assertion checks.Hereby the design and elaboration of the concrete test cases...

  10. Interactive Web Services with Java

    DEFF Research Database (Denmark)

    Møller, Anders; Schwartzbach, Michael Ignatieff

    This slide collection about Java Web service programming, JSP, Servlets and JWIG is created by: Anders Møller and Michael I. Schwartzbach at the BRICS research center at University of Aarhus, Denmark.......This slide collection about Java Web service programming, JSP, Servlets and JWIG is created by: Anders Møller and Michael I. Schwartzbach at the BRICS research center at University of Aarhus, Denmark....

  11. Functional programming in JavaScript

    CERN Document Server

    Mantyla, Dan

    2015-01-01

    If you are a JavaScript developer interested in learning functional programming, looking for the quantum leap towards mastering the JavaScript language, or just want to become a better programmer in general, then this book is ideal for you. It is aimed at programmers involved in developing reactive frontend apps, server-side apps that wrangle with reliability and concurrency, and everything in between.

  12. Development of Remote Inspection Systems with the Java Applet

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Yoo Rark; Lee, Jae Cheol; Kim, Jae Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2005-07-01

    The world wide web and java are powerful networking technologies on the internet. An applet is a program written in the java programming language that can be included in an HTML page, much in the same way as an image is included. When we use a Java technology-enabled browser to view a page that contains an applet, the applet code is transferred to a client's system and executed by the browser's Java Virtual Machine (JVM). We have developed two remote inspection systems for a reactor wall inspection and guide tube spilt pin inspection based on the java and traditional programming language. The java is used on a GUI(graphic user interface) and the traditional visual C++ programming language is used to control the inspection equipments.

  13. JBoss Weld CDI for Java platform

    CERN Document Server

    Finnegan, Ken

    2013-01-01

    This book is a mini tutorial with plenty of code examples and strategies to give you numerous options when building your own applications.""JBoss Weld CDI for Java Platform"" is written for developers who are new to dependency injection. A rudimentary knowledge of Java is required.

  14. Observational study to mitigate seismic risks in mines: a new Japanese-South African collaborative project

    CSIR Research Space (South Africa)

    Durrheim, RJ

    2009-09-01

    Full Text Available Mining-induced earthquakes pose a hazard to workers in deep South African mines, while natural earthquakes pose a hazard to people living close to plate boundaries. Researchers introduce a 5-year Japanese-South African collaborative project entitled...

  15. Biomarker responses of mussels exposed to earthquake disturbances

    Science.gov (United States)

    Chandurvelan, Rathishri; Marsden, Islay D.; Glover, Chris N.; Gaw, Sally

    2016-12-01

    The green-lipped mussel, Perna canaliculus is recognised as a bioindicator of coastal contamination in New Zealand (NZ). Mussels (shell length 60-80 mm) were collected from three intertidal areas of Canterbury in the South Island of NZ prior to extreme earthquake disturbances on 22nd February 2011, and 9 months later in October 2011. Trace elements, including arsenic (As), cadmium (Cd), copper (Cu), lead (Pb), nickel (Ni), and zinc (Zn), were measured in the gills, digestive gland, foot and mantle. Metal levels in tissues were site specific, and mostly unaffected by earthquake disturbances. Physiological biomarkers were negatively affected by earthquake disturbances and mussels from the Port of Lyttelton had higher negative scope for growth post-earthquake. Metallothionein-like protein in the digestive gland correlated with metal content of tissues, as did catalase activity in the gill and lipid peroxidation values for the digestive gland. This research demonstrates that physiological and other biomarkers are effective at detecting the effects of multiple stressors following seismic disturbances.

  16. jFuzz: A Concolic Whitebox Fuzzer for Java

    Science.gov (United States)

    Jayaraman, Karthick; Harvison, David; Ganesh, Vijay; Kiezun, Adam

    2009-01-01

    We present jFuzz, a automatic testing tool for Java programs. jFuzz is a concolic whitebox fuzzer, built on the NASA Java PathFinder, an explicit-state Java model checker, and a framework for developing reliability and analysis tools for Java. Starting from a seed input, jFuzz automatically and systematically generates inputs that exercise new program paths. jFuzz uses a combination of concrete and symbolic execution, and constraint solving. Time spent on solving constraints can be significant. We implemented several well-known optimizations and name-independent caching, which aggressively normalizes the constraints to reduce the number of calls to the constraint solver. We present preliminary results due to the optimizations, and demonstrate the effectiveness of jFuzz in creating good test inputs. The source code of jFuzz is available as part of the NASA Java PathFinder. jFuzz is intended to be a research testbed for investigating new testing and analysis techniques based on concrete and symbolic execution. The source code of jFuzz is available as part of the NASA Java PathFinder.

  17. Extensible numerical library in JAVA

    International Nuclear Information System (INIS)

    Aso, T.; Okazawa, H.; Takashimizu, N.

    2001-01-01

    The authors present the current status of the project for developing the numerical library in JAVA. The authors have presented how object-oriented techniques improve usage and also development of numerical libraries compared with the conventional way at previous conference. The authors need many functions for data analysis which is not provided within JAVA language, for example, good random number generators, special functions and so on. Authors' development strategy is focused on easiness of implementation and adding new features by users themselves not only by developers. In HPC field, there are other focus efforts to develop numerical libraries in JAVA. However, their focus is on the performance of execution, not easiness of extension. Following the strategy, the authors have designed and implemented more classes for random number generators and so on

  18. Explicit Precedence Constraints in Safety-Critical Java

    DEFF Research Database (Denmark)

    Puffitsch, Wolfgang; Noulard, Eric; Pagetti, Claire

    2013-01-01

    Safety-critical Java (SCJ) aims at making the amenities of Java available for the development of safety-critical applications. The multi-rate synchronous language Prelude facilitates the specification of the communication and timing requirements of complex real-time systems. This paper combines...... to provide explicit support for precedence constraints. We present the considerations behind the design of this extension and discuss our experiences with a first prototype implementation based on the SCJ implementation of the Java Optimized Processor....

  19. Learning Java by building Android games

    CERN Document Server

    Horton, John

    2015-01-01

    If you are completely new to either Java, Android, or game programming and are aiming to publish Android games, then this book is for you. This book also acts as a refresher for those who already have experience in Java on another platforms or other object-oriented languages.

  20. The Java EE architect's handbook how to be a successful application architect for Java EE applications

    CERN Document Server

    Ashmore, Derek C.

    2014-01-01

    This handbook is a concise guide to assuming the role of application architect for Java EE applications. This handbook will guide the application architect through the entire Java EE project including identifying business requirements, performing use-case analysis, object and data modeling, and guiding a development team during construction. This handbook will provide tips and techniques for communicating with project managers and management. This handbook will provide strategies for making your application easier and less costly to support. Whether you are about to architect your first Java EE application or are looking for ways to keep your projects on-time and on-budget, you will refer to this handbook again and again.

  1. New Web Server - the Java Version of Tempest - Produced

    Science.gov (United States)

    York, David W.; Ponyik, Joseph G.

    2000-01-01

    A new software design and development effort has produced a Java (Sun Microsystems, Inc.) version of the award-winning Tempest software (refs. 1 and 2). In 1999, the Embedded Web Technology (EWT) team received a prestigious R&D 100 Award for Tempest, Java Version. In this article, "Tempest" will refer to the Java version of Tempest, a World Wide Web server for desktop or embedded systems. Tempest was designed at the NASA Glenn Research Center at Lewis Field to run on any platform for which a Java Virtual Machine (JVM, Sun Microsystems, Inc.) exists. The JVM acts as a translator between the native code of the platform and the byte code of Tempest, which is compiled in Java. These byte code files are Java executables with a ".class" extension. Multiple byte code files can be zipped together as a "*.jar" file for more efficient transmission over the Internet. Today's popular browsers, such as Netscape (Netscape Communications Corporation) and Internet Explorer (Microsoft Corporation) have built-in Virtual Machines to display Java applets.

  2. Professionell entwickeln mit Java EE 7 das umfassende Handbuch

    CERN Document Server

    Salvanos, Alexander

    2014-01-01

    Ein praxisorientiertes Lehrbuch zur JEE 7 und zugleich ein Standardwerk, das Sie auf Ihrem Weg zum Enterprise-Entwickler begleitet. Inklusive Best Practices für leichtgewichtige Enterprise Applications, Standards zu servicebasierten Anwendungen, Persistence API, Dependency Injection, HTML5 und Performance-Tuning. Aus dem Inhalt: Grundlagen und Installation Software-Architektur mit Java EE Webanwendungen mit HTML5 und CSS3 Java Standard Tag Library Asynchrone Servlets und Non-blocking I/O Datenbanken anbinden mit der JDBC API Java Server Faces Datenbank-Organisation Java Persistence API Objektrelationales Mapping Transaktionssicherheit Performance-Tuning Internationalisierung Enterprise Java Beans WebSockets PrimeFaces Deployment Galileo Press heißt von jetzt an Rheinwerk Verlag.

  3. Java Performance Mysteries

    Directory of Open Access Journals (Sweden)

    Maldikar Pranita

    2016-01-01

    The contributions of this paper are (1 Observing Java performance mysteries in the cloud, (2 Identifying the sources of performance mysteries, and (3 Obtaining optimal and reproducible performance data.

  4. Introduction to Graphics Programming in Java

    DEFF Research Database (Denmark)

    Rosendahl, Mads

    Writing graphics applications in Java using Swing can be quite a daunting experience which requires understanding of some large libraries, and fairly advanced aspects of Java. In these notes we will show that by using a small subset of the Swing package we can write a write range of graphics...

  5. Determining Earthquake Susceptible Areas Southeast of Yogyakarta, Indonesia—Outcrop Analysis from Structure from Motion (SfM and Geographic Information System (GIS

    Directory of Open Access Journals (Sweden)

    Aditya Saputra

    2018-04-01

    Full Text Available Located approximately a hundred kilometres north of Java Subduction Zone, Java Island has a complicated geology and geomorphology. The north zone is dominated by the folded area, the centre is dominated by the active volcanic arc and the south of Java including the study area (Southeast part of Yogyakarta City, is dominated by the uplifted southern mountain. In general, the study area is part of the Bantul’s Graben. In the middle part of study area flows the Opak River, which is often associated with normal faults of Opak Fault. The Opak Fault is such a complex fault system which has a complex local fault which can cause worst local site effect when earthquakes occur. However, the geology map of Yogyakarta is the only data that gives the characteristics of Opak Fault roughly. Thus, the effort to identify unchartered fault system needs to be done. The aims of this study are to conduct the outcrop study, to identify the micro faults and to improve the understanding of faults system to support the earthquake hazard and risk assessment. The integrated method of remote sensing, structure from motion (SfM, geographic information system (GIS and direct outcrop observation was conducted in the study area. Remote sensing was applied to recognize the outcrop location and to extract the nature lineament feature which can be used as fault indicator. The structure from motion was used to support characterising the outcrop in the field, to identify the fault evidence, and to measure the fault displacement on the outcrops. The direct outcrop observation is very useful to reveal the lithofacies characteristics and to reconstruct the lithostratigraphic correlation among the outcrops. Meanwhile, GIS was used to analyse all the data from remote sensing, SfM, and direct outcrop observation. The main findings of this study were as follows: the middle part of study area has the most complicated geologic structure. At least 56 faults evidence with the maximum

  6. Connecting slow earthquakes to huge earthquakes.

    Science.gov (United States)

    Obara, Kazushige; Kato, Aitaro

    2016-07-15

    Slow earthquakes are characterized by a wide spectrum of fault slip behaviors and seismic radiation patterns that differ from those of traditional earthquakes. However, slow earthquakes and huge megathrust earthquakes can have common slip mechanisms and are located in neighboring regions of the seismogenic zone. The frequent occurrence of slow earthquakes may help to reveal the physics underlying megathrust events as useful analogs. Slow earthquakes may function as stress meters because of their high sensitivity to stress changes in the seismogenic zone. Episodic stress transfer to megathrust source faults leads to an increased probability of triggering huge earthquakes if the adjacent locked region is critically loaded. Careful and precise monitoring of slow earthquakes may provide new information on the likelihood of impending huge earthquakes. Copyright © 2016, American Association for the Advancement of Science.

  7. Overview of Java application configuration frameworks

    OpenAIRE

    Denisov, Victor

    2013-01-01

    This paper reviews three major application configuration frameworks for Java-based applications: java.util.Properties, Apache Commons Configuration and Preferences API. Basic functionality of each framework is illustrated with code examples. Pros and cons of each framework are described in moderate detail. Suggestions are made about typical use cases for each framework.

  8. Rocking motion of structures under earthquakes. Overturning of 2-DOF system

    International Nuclear Information System (INIS)

    Kobayashi, Koichi; Watanabe, Tetsuya; Tanaka, Kihachiro; Tomoda, Akinori

    2011-01-01

    In recent years, huge earthquakes happen, for example, The South Hyogo prefecture Earthquake in 1995, The Mid Niigata Prefecture Earthquake in 2004, The Iwate-Miyagi Nairiku Earthquake in 2008. In The Niigataken Chuetsu-oki Earthquake in 2007, hundreds of drums fell down and water spilled out. A lot of studies about rocking behavior of rigid body had been performed from 1960's. However, these studies were only for a specific condition of the structure size or input vibration characteristics. Therefore, generalizes fall condition for earthquake is required. This paper deals with the analytical and the experimental study of the rocking vibration of 1-DOF rocking system, 2-DOF vibration-rocking system and 2-DOF rocking system under earthquakes. In this study, the equation of motion for each rocking systems are developed. The numerical model of 2-DOF rocking system is evaluated by free rocking experiment. In this paper, 'Overturning Map' which can distinguish whether structures falls or not is proposed. The overturning map of each rocking systems excited by the artificial earthquake wave calculated from the design spectrum is shown. As the result, overturning condition of structures is clarified. (author)

  9. RxJava essentials

    CERN Document Server

    Morgillo, Ivan

    2015-01-01

    If you are an experienced Java developer, reactive programming will give you a new way to approach scalability and concurrency in your backend systems, without forcing you to switch programming languages.

  10. Connecting slow earthquakes to huge earthquakes

    OpenAIRE

    Obara, Kazushige; Kato, Aitaro

    2016-01-01

    Slow earthquakes are characterized by a wide spectrum of fault slip behaviors and seismic radiation patterns that differ from those of traditional earthquakes. However, slow earthquakes and huge megathrust earthquakes can have common slip mechanisms and are located in neighboring regions of the seismogenic zone. The frequent occurrence of slow earthquakes may help to reveal the physics underlying megathrust events as useful analogs. Slow earthquakes may function as stress meters because of th...

  11. Pointer Analysis for JavaScript Programming Tools

    DEFF Research Database (Denmark)

    Feldthaus, Asger

    Tools that can assist the programmer with tasks, such as, refactoring or code navigation, have proven popular for Java, C#, and other programming languages. JavaScript is a widely used programming language, and its users could likewise benefit from such tools, but the dynamic nature of the language...... is an obstacle for the development of these. Because of this, tools for JavaScript have long remained ineffective compared to those for many other programming languages. Static pointer analysis can provide a foundation for more powerful tools, although the design of this analysis is itself a complicated endeavor....... In this work, we explore techniques for performing pointer analysis of JavaScript programs, and we find novel applications of these techniques. In particular, we demonstrate how these can be used for code navigation, automatic refactoring, semi-automatic refactoring of incomplete programs, and checking of type...

  12. Patterns for Safety-Critical Java Memory Usage

    DEFF Research Database (Denmark)

    Rios Rivas, Juan Ricardo; Nilsen, Kelvin; Schoeberl, Martin

    2012-01-01

    Scoped memories are introduced in real-time Java profiles in order to make object allocation and deallocation time and space predictable. However, explicit scoping requires care from programmers when dealing with temporary objects, passing scope-allocated objects as arguments to methods, and retu......Scoped memories are introduced in real-time Java profiles in order to make object allocation and deallocation time and space predictable. However, explicit scoping requires care from programmers when dealing with temporary objects, passing scope-allocated objects as arguments to methods...... are illustrated by implementations in the safety-critical Java profile....

  13. Java EE 7 performance tuning and optimization

    CERN Document Server

    Oransa, Osama

    2014-01-01

    The book adopts a step-by-step approach, starting from building the basics and adding to it gradually by using different tools and examples. The book sequence is easy to follow and all topics are fully illustrated showing you how to make good use of different performance diagnostic tools. If you are an experienced Java developer, architect, team leader, consultant, support engineer, or anyone else who needs performance tuning in your Java applications, and in particular, Java enterprise applications, this book is for you. No prior experience of performance tuning is required.

  14. Indian Ocean Earthquake and Tsunami: Humanitarian Assistance and Relief Operations

    National Research Council Canada - National Science Library

    Margesson, Rhoda

    2005-01-01

    On December 26, 2004, a magnitude 9.0 undersea earthquake off the west coast of northern Sumatra, Indonesia, unleashed a tsunami that affected more than 12 countries throughout south and southeast Asia and stretched as far...

  15. Static stress changes associated with normal faulting earthquakes in South Balkan area

    Science.gov (United States)

    Papadimitriou, E.; Karakostas, V.; Tranos, M.; Ranguelov, B.; Gospodinov, D.

    2007-10-01

    Activation of major faults in Bulgaria and northern Greece presents significant seismic hazard because of their proximity to populated centers. The long recurrence intervals, of the order of several hundred years as suggested by previous investigations, imply that the twentieth century activation along the southern boundary of the sub-Balkan graben system, is probably associated with stress transfer among neighbouring faults or fault segments. Fault interaction is investigated through elastic stress transfer among strong main shocks ( M ≥ 6.0), and in three cases their foreshocks, which ruptured distinct or adjacent normal fault segments. We compute stress perturbations caused by earthquake dislocations in a homogeneous half-space. The stress change calculations were performed for faults of strike, dip, and rake appropriate to the strong events. We explore the interaction between normal faults in the study area by resolving changes of Coulomb failure function ( ΔCFF) since 1904 and hence the evolution of the stress field in the area during the last 100 years. Coulomb stress changes were calculated assuming that earthquakes can be modeled as static dislocations in an elastic half-space, and taking into account both the coseismic slip in strong earthquakes and the slow tectonic stress buildup associated with major fault segments. We evaluate if these stress changes brought a given strong earthquake closer to, or sent it farther from, failure. Our modeling results show that the generation of each strong event enhanced the Coulomb stress on along-strike neighbors and reduced the stress on parallel normal faults. We extend the stress calculations up to present and provide an assessment for future seismic hazard by identifying possible sites of impending strong earthquakes.

  16. Fixing the Sorting Algorithm for Android, Java and Python

    NARCIS (Netherlands)

    C.P.T. de Gouw (Stijn); F.S. de Boer (Frank)

    2015-01-01

    htmlabstractTim Peters developed the Timsort hybrid sorting algorithm in 2002. TimSort was first developed for Python, a popular programming language, but later ported to Java (where it appears as java.util.Collections.sort and java.util.Arrays.sort). TimSort is today used as the default sorting

  17. A new Java Thread model for concurrent programming of real-time systems

    NARCIS (Netherlands)

    Hilderink, G.H.; Broenink, Johannes F.; Bakkers, André

    1998-01-01

    The Java ™ Virtual Machine (JVM) provides a high degree of platform independence, but being an interpreter, Java has a poor system performance. New compiler techniques and Java processors will gradually improve the performance of Java, but despite these developments, Java is still far from

  18. Flexure of the Indian plate and intraplate earthquakes

    Indian Academy of Sciences (India)

    The imposition of this stress field on the northward moving Indian plate appears fundamental to explaining the current distribution of intraplate earthquakes and their mechanisms. The current study highlights an outer trough south of the flexural bulge in central India where surface stresses are double the contiguous ...

  19. A long-term geomagnetic excursion from Plio-Pleistocene sediments in Java

    Science.gov (United States)

    Hyodo, Masayuki; Sunata, Wahyu; Susanto, Eko E.

    1992-06-01

    Duplicate records of a geomagnetic excursion at two sites separated by 200 km in Java, Indonesia, are reported. The existence of a large-scale wing of declination between the Olduvai and Jaramillo event is revealed. The field directions in reverse polarity show a gradual clockwise swing to almost west-pointing directions, followed by a rapid return to south-pointing directions. At both sites, the declinations have maximum deflection more than 70 deg from the axial dipole field direction, and the inclinations remain low during the swing. An upward-pointing eccentric radial dipole model rather than a downward-pointing one seems plausible to explain the geomagnetic behavior during the excursion.

  20. The 2012 Mw5.6 earthquake in Sofia seismogenic zone - is it a slow earthquake

    Science.gov (United States)

    Raykova, Plamena; Solakov, Dimcho; Slavcheva, Krasimira; Simeonova, Stela; Aleksandrova, Irena

    2017-04-01

    Recently our understanding of tectonic faulting has been shaken by the discoveries of seismic tremor, low frequency earthquakes, slow slip events, and other models of fault slip. These phenomenas represent models of failure that were thought to be non-existent and theoretically impossible only a few years ago. Slow earthquakes are seismic phenomena in which the rupture of geological faults in the earth's crust occurs gradually without creating strong tremors. Despite the growing number of observations of slow earthquakes their origin remains unresolved. Studies show that the duration of slow earthquakes ranges from a few seconds to a few hundred seconds. The regular earthquakes with which most people are familiar release a burst of built-up stress in seconds, slow earthquakes release energy in ways that do little damage. This study focus on the characteristics of the Mw5.6 earthquake occurred in Sofia seismic zone on May 22nd, 2012. The Sofia area is the most populated, industrial and cultural region of Bulgaria that faces considerable earthquake risk. The Sofia seismic zone is located in South-western Bulgaria - the area with pronounce tectonic activity and proved crustal movement. In 19th century the city of Sofia (situated in the centre of the Sofia seismic zone) has experienced two strong earthquakes with epicentral intensity of 10 MSK. During the 20th century the strongest event occurred in the vicinity of the city of Sofia is the 1917 earthquake with MS=5.3 (I0=7-8 MSK64).The 2012 quake occurs in an area characterized by a long quiescence (of 95 years) for moderate events. Moreover, a reduced number of small earthquakes have also been registered in the recent past. The Mw5.6 earthquake is largely felt on the territory of Bulgaria and neighbouring countries. No casualties and severe injuries have been reported. Mostly moderate damages were observed in the cities of Pernik and Sofia and their surroundings. These observations could be assumed indicative for a

  1. Practical database programming with Java

    CERN Document Server

    Bai, Ying

    2011-01-01

    "This important resource offers a detailed description about the practical considerations and applications in database programming using Java NetBeans 6.8 with authentic examples and detailed explanations. This book provides readers with a clear picture as to how to handle the database programming issues in the Java NetBeans environment. The book is ideal for classroom and professional training material. It includes a wealth of supplemental material that is available for download including Powerpoint slides, solution manuals, and sample databases"--

  2. An Earthquake Information Service with Free and Open Source Tools

    Science.gov (United States)

    Schroeder, M.; Stender, V.; Jüngling, S.

    2015-12-01

    At the GFZ German Research Centre for Geosciences in Potsdam, the working group Earthquakes and Volcano Physics examines the spatiotemporal behavior of earthquakes. In this context also the hazards of volcanic eruptions and tsunamis are explored. The aim is to collect related information after the occurrence of such extreme event and make them available for science and partly to the public as quickly as possible. However, the overall objective of this research is to reduce the geological risks that emanate from such natural hazards. In order to meet the stated objectives and to get a quick overview about the seismicity of a particular region and to compare the situation to historical events, a comprehensive visualization was desired. Based on the web-accessible data from the famous GFZ GEOFON network a user-friendly web mapping application was realized. Further, this web service integrates historical and current earthquake information from the USGS earthquake database, and more historical events from various other catalogues like Pacheco, International Seismological Centre (ISC) and more. This compilation of sources is unique in Earth sciences. Additionally, information about historical and current occurrences of volcanic eruptions and tsunamis are also retrievable. Another special feature in the application is the containment of times via a time shifting tool. Users can interactively vary the visualization by moving the time slider. Furthermore, the application was realized by using the newest JavaScript libraries which enables the application to run in all sizes of displays and devices. Our contribution will present the making of, the architecture behind, and few examples of the look and feel of this application.

  3. E-DECIDER Rapid Response to the M 6.0 South Napa Earthquake

    Science.gov (United States)

    Glasscoe, M. T.; Parker, J. W.; Pierce, M. E.; Wang, J.; Eguchi, R. T.; Huyck, C. K.; Hu, Z.; Chen, Z.; Yoder, M. R.; Rundle, J. B.; Rosinski, A.

    2014-12-01

    E-DECIDER initiated rapid response mode when the California Earthquake Clearinghouse was activated the morning following the M6 Napa earthquake. Data products, including: 1) rapid damage and loss estimates, 2) deformation magnitude and slope change maps, and 3) aftershock forecasts were provided to the Clearinghouse partners within 24 hours of the event via XchangeCore Web Service Data Orchestration sharing. NASA data products were provided to end-users via XchangeCore, EERI and Clearinghouse websites, and ArcGIS online for Napa response, reaching a wide response audience. The E-DECIDER team helped facilitate rapid delivery of NASA products to stakeholders and participated in Clearinghouse Napa earthquake briefings to update stakeholders on product information. Rapid response products from E-DECIDER can be used to help prioritize response efforts shortly after the event has occurred. InLET (Internet Loss Estimation Tool) post-event damage and casualty estimates were generated quickly after the Napa earthquake. InLET provides immediate post-event estimates of casualties and building damage by performing loss/impact simulations using USGS ground motion data and FEMA HAZUS damage estimation technology. These results were provided to E-DECIDER by their collaborators, ImageCat, Inc. and the Community Stakeholder Network (CSN). Strain magnitude and slope change maps were automatically generated when the Napa earthquake appeared on the USGS feed. These maps provide an early estimate of where the deformation has occurred and where damage may be localized. Using E-DECIDER critical infrastructure overlays with damage estimates, decision makers can direct response effort that can be verified later with field reconnaissance and remote sensing-based observations. Earthquake aftershock forecast maps were produced within hours of the event. These maps highlight areas where aftershocks are likely to occur and can also be coupled with infrastructure overlays to help direct response

  4. Design and Implementation of Web Based Supply Centers Material Request and Tracking (SMART) System Using With JAVA and JAVA Servlets

    National Research Council Canada - National Science Library

    Ciftci, Cemalettin

    2001-01-01

    .... The third tier maintains the database management systems. Java servlets and Java provide programmers platform and operating system independent, multi-threaded, object oriented, secure and mobile means to create dynamic content on the web...

  5. Programación Java

    OpenAIRE

    Martínez de Morentin Iribarren, Xabier

    2014-01-01

    Este proyecto trata de informar y dar una base sobre Java, así como los programas a los cuales se les da uso, para facilitar la programación en el mundo laboral, ya sean programas de gestión de datos como Assembla y Tortoise o de desarrollo de aplicaciones, como Eclipse o NetBeans. Trata de llevar al ámbito más profesional, la realización de una aplicación Java. Para ello se respetarán los convenios a la hora de denominaciones de clases, así como los métodos, etc., y la realización d...

  6. Learning PHP, MySQL, and JavaScript

    CERN Document Server

    Nixon, Robin

    2009-01-01

    If you know HTML, this guide will have you building interactive websites quickly. You'll learn how to create responsive, data-driven websites with PHP, MySQL, and JavaScript, regardless of whether you already know how to program. Discover how the powerful combination of PHP and MySQL provides an easy way to build modern websites complete with dynamic data and user interaction. You'll also learn how to add JavaScript to create rich Internet applications and websites. Learning PHP, MySQL, and JavaScript explains each technology separately, shows you how to combine them, and introduces valuable

  7. Tsunami Source Modeling of the 2015 Volcanic Tsunami Earthquake near Torishima, South of Japan

    Science.gov (United States)

    Sandanbata, O.; Watada, S.; Satake, K.; Fukao, Y.; Sugioka, H.; Ito, A.; Shiobara, H.

    2017-12-01

    An abnormal earthquake occurred at a submarine volcano named Smith Caldera, near Torishima Island on the Izu-Bonin arc, on May 2, 2015. The earthquake, which hereafter we call "the 2015 Torishima earthquake," has a CLVD-type focal mechanism with a moderate seismic magnitude (M5.7) but generated larger tsunami waves with an observed maximum height of 50 cm at Hachijo Island [JMA, 2015], so that the earthquake can be regarded as a "tsunami earthquake." In the region, similar tsunami earthquakes were observed in 1984, 1996 and 2006, but their physical mechanisms are still not well understood. Tsunami waves generated by the 2015 earthquake were recorded by an array of ocean bottom pressure (OBP) gauges, 100 km northeastern away from the epicenter. The waves initiated with a small downward signal of 0.1 cm and reached peak amplitude (1.5-2.0 cm) of leading upward signals followed by continuous oscillations [Fukao et al., 2016]. For modeling its tsunami source, or sea-surface displacement, we perform tsunami waveform simulations, and compare synthetic and observed waveforms at the OBP gauges. The linear Boussinesq equations are adapted with the tsunami simulation code, JAGURS [Baba et al., 2015]. We first assume a Gaussian-shaped sea-surface uplift of 1.0 m with a source size comparable to Smith Caldera, 6-7 km in diameter. By shifting source location around the caldera, we found the uplift is probably located within the caldera rim, as suggested by Sandanbata et al. [2016]. However, synthetic waves show no initial downward signal that was observed at the OBP gauges. Hence, we add a ring of subsidence surrounding the main uplift, and examine sizes and amplitudes of the main uplift and the subsidence ring. As a result, the model of a main uplift of around 1.0 m with a radius of 4 km surrounded by a ring of small subsidence shows good agreement of synthetic and observed waveforms. The results yield two implications for the deformation process that help us to understanding

  8. Runtime Support for Type-Safe Dynamic Java Classes

    National Research Council Canada - National Science Library

    Malabarba, Scott; Pandey, Raju; Gragg, Jeff; Barr, Earl; Barnes, J. F

    2000-01-01

    .... In this paper we present an approach for supporting dynamic evolution of Java programs. In this approach, Java programs can evolve by changing their components, namely classes, during their execution...

  9. The HayWired Earthquake Scenario—Earthquake Hazards

    Science.gov (United States)

    Detweiler, Shane T.; Wein, Anne M.

    2017-04-24

    The HayWired scenario is a hypothetical earthquake sequence that is being used to better understand hazards for the San Francisco Bay region during and after an earthquake of magnitude 7 on the Hayward Fault. The 2014 Working Group on California Earthquake Probabilities calculated that there is a 33-percent likelihood of a large (magnitude 6.7 or greater) earthquake occurring on the Hayward Fault within three decades. A large Hayward Fault earthquake will produce strong ground shaking, permanent displacement of the Earth’s surface, landslides, liquefaction (soils becoming liquid-like during shaking), and subsequent fault slip, known as afterslip, and earthquakes, known as aftershocks. The most recent large earthquake on the Hayward Fault occurred on October 21, 1868, and it ruptured the southern part of the fault. The 1868 magnitude-6.8 earthquake occurred when the San Francisco Bay region had far fewer people, buildings, and infrastructure (roads, communication lines, and utilities) than it does today, yet the strong ground shaking from the earthquake still caused significant building damage and loss of life. The next large Hayward Fault earthquake is anticipated to affect thousands of structures and disrupt the lives of millions of people. Earthquake risk in the San Francisco Bay region has been greatly reduced as a result of previous concerted efforts; for example, tens of billions of dollars of investment in strengthening infrastructure was motivated in large part by the 1989 magnitude 6.9 Loma Prieta earthquake. To build on efforts to reduce earthquake risk in the San Francisco Bay region, the HayWired earthquake scenario comprehensively examines the earthquake hazards to help provide the crucial scientific information that the San Francisco Bay region can use to prepare for the next large earthquake, The HayWired Earthquake Scenario—Earthquake Hazards volume describes the strong ground shaking modeled in the scenario and the hazardous movements of

  10. Learning JavaScript data structures and algorithms

    CERN Document Server

    Groner, Loiane

    2014-01-01

    If you are a JavaScript developer or someone who has basic knowledge of JavaScript, and want to explore its optimum ability, this fast-paced book is definitely for you. Programming logic is the only thing you need to know to start having fun with algorithms.

  11. Java parallel secure stream for grid computing

    International Nuclear Information System (INIS)

    Chen, J.; Akers, W.; Chen, Y.; Watson, W.

    2001-01-01

    The emergence of high speed wide area networks makes grid computing a reality. However grid applications that need reliable data transfer still have difficulties to achieve optimal TCP performance due to network tuning of TCP window size to improve the bandwidth and to reduce latency on a high speed wide area network. The authors present a pure Java package called JPARSS (Java Parallel Secure Stream) that divides data into partitions that are sent over several parallel Java streams simultaneously and allows Java or Web applications to achieve optimal TCP performance in a gird environment without the necessity of tuning the TCP window size. Several experimental results are provided to show that using parallel stream is more effective than tuning TCP window size. In addition X.509 certificate based single sign-on mechanism and SSL based connection establishment are integrated into this package. Finally a few applications using this package will be discussed

  12. Emergence of Lava Dome from the Crater Lake of Kelud Volcano, East Java

    Directory of Open Access Journals (Sweden)

    Sri Hidayati

    2014-06-01

    Full Text Available DOI: 10.17014/ijog.v4i4.83Kelud Volcano (+1731 m in East Java is one of the most active and dangerous volcanoes in Indonesia. A large lake occupies the summit crater. Historical eruptions generally only lasted for a very short time, mostly no longer than a few hours. The outburst is usually accompanied by pyroclastic flows. On August 2007, the activity of the volcano was initiated by the increase of the temperature of lake water and the change of the colour from typical green to yellow. Activities of the volcano are discussed following the swarms of volcano-tectonic (VT earthquakes on September 10th, September 26th to 29th, and October 24th to November 2nd. On September 26th to 29th, hypocentral distribution of those VT shifted from 5 km deep to just beneath the crater. The highest number of VT earthquakes occurred on November 1st attaining 50 events, then followed by a swarm of B-type events, where the number reached 1437 events in a day. The volcanic activity peaked on November 3rd when seismic records became saturated, which then was preceded by a sharp increase of lake temperature and a sudden deflation of radial tilt. It suggests that the lava extrusion forming a lava dome was taking place.

  13. Java 7 New Features Cookbook

    CERN Document Server

    Reese, Richard M

    2012-01-01

    Each recipe comprises step-by-step instructions followed by an analysis of what was done in each task and other useful information. The book is designed so that you can read it chapter by chapter, or look at the list of recipes and refer to them in no particular order. Each example comes with its expected output to make your learning even easier. This book is designed to bring those who are familiar with Java up-to-speed on the new features found in Java 7.

  14. Potential of Fishing Port Development in the East Java

    Science.gov (United States)

    Rosana, N.; Prasita, V. D.

    2018-03-01

    The development of fishing ports in East Java is one of efforts to increase the province revenue, develop the fishing industry and to improve the welfare of fishermen. Profile of capture fisheries in East Java should be provide information that can be developed based on priorities and types of resources. The purpose of this study was to determine several districts in East Java which is a priority for the development of fishing ports based on the potential that exists. The method used is descriptive and spatial analysis in order to obtain an overview of the districts in East Java that has the potential to be developed. Results of the study is the districts in East Java are priorities for the development of fishing ports based on aspects related to the fishery is Banyuwangi, Trenggalek and Jember.

  15. The performance of the Armenia Nuclear Power Plant and power facilities in the 1988 Armenia earthquake

    International Nuclear Information System (INIS)

    Yanev, P.I.

    1989-01-01

    The speaker presents the geology, seismology, and effects of the Armenian earthquake which occured on December 7,1988. This is a highly industrialized area with numerous power plants, including one nuclear power plant in addition to several conventional plants. The response of the nuclear plant to the earthquake is described in detail, and the speaker concludes with an outline of suggestions which could help with earthquake preparedness in the United States, particularly in Puget Sound, Washington; along the New Madrid in Missouri and Tennessee;in the Charleston ,South Carolina area; and in the Salt Lake City region of Utah. All of these areas have similar earthquake potential, building types, absence of earthquake preparedness programs, the possibility of an earthquake of comparable proportions as Armenia

  16. Fracture analysis of concrete gravity dam under earthquake induced ...

    African Journals Online (AJOL)

    Michael Horsfall

    Fracture analysis of concrete gravity dam under earthquake induced loads. 1. ABBAS MANSOURI;. 2 ... 1 Civil Engineering, Islamic Azad University (South Branch of Tehran)Tehran, Iran ..... parameter has on the results of numerical calculations. In this analysis ... with the help of Abaqus software (Abaqus theory manual ...

  17. JavaScript and interactive web pages in radiology.

    Science.gov (United States)

    Gurney, J W

    2001-10-01

    Web publishing is becoming a more common method of disseminating information. JavaScript is an object-orientated language embedded into modern browsers and has a wide variety of uses. The use of JavaScript in radiology is illustrated by calculating the indices of sensitivity, specificity, and predictive values from a table of true positives, true negatives, false positives, and false negatives. In addition, a single line of JavaScript code can be used to annotate images, which has a wide variety of uses.

  18. The 1911 M ~6.6 Calaveras earthquake: Source parameters and the role of static, viscoelastic, and dynamic coulomb stress changes imparted by the 1906 San Francisco earthquake

    Science.gov (United States)

    Doser, D.I.; Olsen, K.B.; Pollitz, F.F.; Stein, R.S.; Toda, S.

    2009-01-01

    The occurrence of a right-lateral strike-slip earthquake in 1911 is inconsistent with the calculated 0.2-2.5 bar static stress decrease imparted by the 1906 rupture at that location on the Calaveras fault, and 5 yr of calculated post-1906 viscoelastic rebound does little to reload the fault. We have used all available first-motion, body-wave, and surface-wave data to explore possible focal mechanisms for the 1911 earthquake. We find that the event was most likely a right-lateral strikeslip event on the Calaveras fault, larger than, but otherwise resembling, the 1984 Mw 6.1 Morgan Hill earthquake in roughly the same location. Unfortunately, we could recover no unambiguous surface fault offset or geodetic strain data to corroborate the seismic analysis despite an exhaustive archival search. We calculated the static and dynamic Coulomb stress changes for three 1906 source models to understand stress transfer to the 1911 site. In contrast to the static stress shadow, the peak dynamic Coulomb stress imparted by the 1906 rupture promoted failure at the site of the 1911 earthquake by 1.4-5.8 bar. Perhaps because the sample is small and the aftershocks are poorly located, we find no correlation of 1906 aftershock frequency or magnitude with the peak dynamic stress, although all aftershocks sustained a calculated dynamic stress of ???3 bar. Just 20 km to the south of the 1911 epicenter, we find that surface creep of the Calaveras fault at Hollister paused for ~17 yr after 1906, about the expected delay for the calculated static stress drop imparted by the 1906 earthquake when San Andreas fault postseismic creep and viscoelastic relaxation are included. Thus, the 1911 earthquake may have been promoted by the transient dynamic stresses, while Calaveras fault creep 20 km to the south appears to have been inhibited by the static stress changes.

  19. Comparison tomography relocation hypocenter grid search and guided grid search method in Java island

    International Nuclear Information System (INIS)

    Nurdian, S. W.; Adu, N.; Palupi, I. R.; Raharjo, W.

    2016-01-01

    The main data in this research is earthquake data recorded from 1952 to 2012 with 9162 P wave and 2426 events are recorded by 30 stations located around Java island. Relocation hypocenter processed using grid search and guidded grid search method. Then the result of relocation hypocenter become input for tomography pseudo bending inversion process. It can be used to identification the velocity distribution in subsurface. The result of relocation hypocenter by grid search and guided grid search method after tomography process shown in locally and globally. In locally area grid search method result is better than guided grid search according to geological reseach area. But in globally area the result of guided grid search method is better for a broad area because the velocity variation is more diverse than the other one and in accordance with local geological research conditions. (paper)

  20. Java and its future in biomedical computing.

    Science.gov (United States)

    Rodgers, R P

    1996-01-01

    Java, a new object-oriented computing language related to C++, is receiving considerable attention due to its use in creating network-sharable, platform-independent software modules (known as "applets") that can be used with the World Wide Web. The Web has rapidly become the most commonly used information-retrieval tool associated with the global computer network known as the Internet, and Java has the potential to further accelerate the Web's application to medical problems. Java's potentially wide acceptance due to its Web association and its own technical merits also suggests that it may become a popular language for non-Web-based, object-oriented computing. PMID:8880677

  1. Seismogenic structures of the 2006 ML4.0 Dangan Island earthquake offshore Hong Kong

    Science.gov (United States)

    Xia, Shaohong; Cao, Jinghe; Sun, Jinlong; Lv, Jinshui; Xu, Huilong; Zhang, Xiang; Wan, Kuiyuan; Fan, Chaoyan; Zhou, Pengxiang

    2018-02-01

    The northern margin of the South China Sea, as a typical extensional continental margin, has relatively strong intraplate seismicity. Compared with the active zones of Nanao Island, Yangjiang, and Heyuan, seismicity in the Pearl River Estuary is relatively low. However, a ML4.0 earthquake in 2006 occurred near Dangan Island (DI) offshore Hong Kong, and this site was adjacent to the source of the historical M5.8 earthquake in 1874. To reveal the seismogenic mechanism of intraplate earthquakes in DI, we systematically analyzed the structural characteristics in the source area of the 2006 DI earthquake using integrated 24-channel seismic profiles, onshore-offshore wide-angle seismic tomography, and natural earthquake parameters. We ascertained the locations of NW- and NE-trending faults in the DI sea and found that the NE-trending DI fault mainly dipped southeast at a high angle and cut through the crust with an obvious low-velocity anomaly. The NW-trending fault dipped southwest with a similar high angle. The 2006 DI earthquake was adjacent to the intersection of the NE- and NW-trending faults, which suggested that the intersection of the two faults with different strikes could provide a favorable condition for the generation and triggering of intraplate earthquakes. Crustal velocity model showed that the high-velocity anomaly was imaged in the west of DI, but a distinct entity with low-velocity anomaly in the upper crust and high-velocity anomaly in the lower crust was found in the south of DI. Both the 1874 and 2006 DI earthquakes occurred along the edge of the distinct entity. Two vertical cross-sections nearly perpendicular to the strikes of the intersecting faults revealed good spatial correlations between the 2006 DI earthquake and the low to high speed transition in the distinct entity. This result indicated that the transitional zone might be a weakly structural body that can store strain energy and release it as a brittle failure, resulting in an earthquake

  2. Using Java for distributed computing in the Gaia satellite data processing

    Science.gov (United States)

    O'Mullane, William; Luri, Xavier; Parsons, Paul; Lammers, Uwe; Hoar, John; Hernandez, Jose

    2011-10-01

    In recent years Java has matured to a stable easy-to-use language with the flexibility of an interpreter (for reflection etc.) but the performance and type checking of a compiled language. When we started using Java for astronomical applications around 1999 they were the first of their kind in astronomy. Now a great deal of astronomy software is written in Java as are many business applications. We discuss the current environment and trends concerning the language and present an actual example of scientific use of Java for high-performance distributed computing: ESA's mission Gaia. The Gaia scanning satellite will perform a galactic census of about 1,000 million objects in our galaxy. The Gaia community has chosen to write its processing software in Java. We explore the manifold reasons for choosing Java for this large science collaboration. Gaia processing is numerically complex but highly distributable, some parts being embarrassingly parallel. We describe the Gaia processing architecture and its realisation in Java. We delve into the astrometric solution which is the most advanced and most complex part of the processing. The Gaia simulator is also written in Java and is the most mature code in the system. This has been successfully running since about 2005 on the supercomputer "Marenostrum" in Barcelona. We relate experiences of using Java on a large shared machine. Finally we discuss Java, including some of its problems, for scientific computing.

  3. Geomorphic and Geologic Controls of Geohazards induced by Nepal's 2015 Gorkha Earthquake

    Science.gov (United States)

    Kargel, J. S.; Leonard, G. J.; Shugar, D. H.; Haritashya, U.K.; Bevington, A.; Fielding, E. J.; Fujita, K.; Geertsema, M.; Miles, E. S.; Steiner, J.; hide

    2015-01-01

    The Gorkha earthquake (Magnitude 7.8) on 25 April 2015 and later aftershocks struck South Asia, killing approx.9,000 and damaging a large region. Supported by a large campaign of responsive satellite data acquisitions over the earthquake disaster zone, our team undertook a satellite image survey of the earthquakes induced geohazards in Nepal and China and an assessment of the geomorphic, tectonic, and lithologic controls on quake-induced landslides. Timely analysis and communication aided response and recovery and informed decision makers. We mapped 4,312 co-seismic and post-seismic landslides. We also surveyed 491 glacier lakes for earthquake damage, but found only 9 landslide-impacted lakes and no visible satellite evidence of outbursts. Landslide densities correlate with slope, peak ground acceleration, surface downdrop, and specific metamorphic lithologies and large plutonic intrusions.

  4. The Strategy of KPID West Java in Socializing Media Literacy

    Directory of Open Access Journals (Sweden)

    Lucy Pujasari Supratman

    2017-07-01

    Full Text Available The socialization strategy of media literacy which has done by KPID West Java (Regional-Indonesia Broadcasting Commission aims to strengthen national integration, national identity, and educate the nation. This study focused on the strategies of KPID West Java as an independent institution of the state in disseminating a variety of media literacy programs that have been run by the West Java KPID period 2015-2018 to promote media literacy. The author used a descriptive case study method. In this study, a case to be analyzed is in how KPID West Java disseminated the media literacy. The essence of media literacy conducted by KPID West Java is to grow the wise society in gratification media and to encourage the broadcaster’s institution to produce quality broadcasting content. KPID West Java as a representative of the public continues to call for media literacy socialization which is harder to be censored if there is no public participation in reporting a content violation. This form of socialization by using new media approach encourage KPID West Java Period 2015-2018 to develop steps of innovative media literacy along with the technology development.

  5. Database Access through Java Technologies

    Directory of Open Access Journals (Sweden)

    Nicolae MERCIOIU

    2010-09-01

    Full Text Available As a high level development environment, the Java technologies offer support to the development of distributed applications, independent of the platform, providing a robust set of methods to access the databases, used to create software components on the server side, as well as on the client side. Analyzing the evolution of Java tools to access data, we notice that these tools evolved from simple methods that permitted the queries, the insertion, the update and the deletion of the data to advanced implementations such as distributed transactions, cursors and batch files. The client-server architectures allows through JDBC (the Java Database Connectivity the execution of SQL (Structured Query Language instructions and the manipulation of the results in an independent and consistent manner. The JDBC API (Application Programming Interface creates the level of abstractization needed to allow the call of SQL queries to any DBMS (Database Management System. In JDBC the native driver and the ODBC (Open Database Connectivity-JDBC bridge and the classes and interfaces of the JDBC API will be described. The four steps needed to build a JDBC driven application are presented briefly, emphasizing on the way each step has to be accomplished and the expected results. In each step there are evaluations on the characteristics of the database systems and the way the JDBC programming interface adapts to each one. The data types provided by SQL2 and SQL3 standards are analyzed by comparison with the Java data types, emphasizing on the discrepancies between those and the SQL types, but also the methods that allow the conversion between different types of data through the methods of the ResultSet object. Next, starting from the metadata role and studying the Java programming interfaces that allow the query of result sets, we will describe the advanced features of the data mining with JDBC. As alternative to result sets, the Rowsets add new functionalities that

  6. Geology Structure Identification Using Pre-Stack Depth Migration (PSDM Method of Tomography Result in North West Java Basin

    Directory of Open Access Journals (Sweden)

    Sudra Irawan

    2017-06-01

    Full Text Available North West Java Basin is a tertiary sedimentary basin which is located in the right of the western part of the Java island. North West Java Basin is geodynamic where currently located at the rear position of the path of the volcanic arc of Java that is the result of the India-Australia plate subduction to the south towards the Eurasian plate (Explanation of Sunda in the north. Geology structure observation is difficult to be conducted at Quaternary volcanicfield due to the classical problem at tropical region. In the study interpretation of fault structures can be done on a cross-section of Pre-Stack Depth Migration (PSDM used prayer namely Hardware Key Device, ie Central Processing Unit: RedHat Enterprise Linux AS 5.0, prayer Monitor 24-inch pieces, Server: SGI altix 450/SuSe Linux Enterprise Server 9.0, 32 GB, 32 X 2,6 GHz Procesor, network: Gigabyte 1 Gb/s, and the software used is paradigm, product: Seismic Processing and Imaging. The third fault obtained in this study in accordance with the geological information derived from previous research conducted by geologists. The second general direction is northwest-southeast direction represented by Baribis fault, fault-fault in the Valley Cimandiri and Gunung Walat. This direction is often known as the directions Meratus (Meratus Trend. Meratus directions interpreted as directions that follow the pattern of continuous arc Cretaceous age to Meratus in Kalimantan.

  7. JAVA CONCURENT PROGRAM FOR THE SMARANDACHE FUNCTION

    OpenAIRE

    Power, David; Tabirca, S.; Tabirca, T.

    2004-01-01

    The aim of this article is to propose a Java concurrent program for the Smarandache fimction based on an equation. Some results concerning the theoretical complexity of this program are proposed. Finally, the experimental results of the sequential and Java programs are given in order to demonstrate the efficiency of the conament implementation.

  8. Formal specification with the Java modeling language

    NARCIS (Netherlands)

    Huisman, Marieke; Ahrendt, Wolfgang; Grahl, Daniel; Hentschel, Martin; Ahrendt, Wolfgang; Beckert, Bernhard; Bubel, Richard; Hähnle, Reiner; Schmitt, Peter H.; Ulbrich, Mattoas

    2016-01-01

    This text is a general, self contained, and tool independent introduction into the Java Modeling Language, JML. It appears in a book about the KeY approach and tool, because JML is the dominating starting point of KeY style Java verification. However, this chapter does not depend on KeY, nor any

  9. Distributed nuclear medicine applications using World Wide Web and Java technology

    International Nuclear Information System (INIS)

    Knoll, P.; Hoell, K.; Koriska, K.; Mirzaei, S.; Koehn, H.

    2000-01-01

    At present, medical applications applying World Wide Web (WWW) technology are mainly used to view static images and to retrieve some information. The Java platform is a relative new way of computing, especially designed for network computing and distributed applications which enables interactive connection between user and information via the WWW. The Java 2 Software Development Kit (SDK) including Java2D API, Java Remote Method Invocation (RMI) technology, Object Serialization and the Java Advanced Imaging (JAI) extension was used to achieve a robust, platform independent and network centric solution. Medical image processing software based on this technology is presented and adequate performance capability of Java is demonstrated by an iterative reconstruction algorithm for single photon emission computerized tomography (SPECT). (orig.)

  10. A Simple Application Program Interface for Saving Java Program Data on a Wiki

    OpenAIRE

    Yamanoue, Takashi; Oda, Kentaro; Shimozono, Koichi

    2012-01-01

    A simple application program interface (API) for Java programs running on a wiki is implemented experimentally. A Java program with the API can be running on a wiki, and the Java program can save its data on the wiki. The Java program consists of PukiWiki, which is a popular wiki in Japan, and a plug-in, which starts up Java programs and classes of Java. A Java applet with default access privilege cannot save its data at a local host. We have constructed an API of applets for easy and unified...

  11. Preliminary results of local earthquake tomography around Bali, Lombok, and Sumbawa regions

    Energy Technology Data Exchange (ETDEWEB)

    Nugraha, Andri Dian, E-mail: nugraha@gf.itb.ac.id; Puspito, Nanang T; Yudistira, Tedi [Global Geophysical Reserach Group, Faculty of Mining and Petroleum Engineering, Institute of Technology Bandung, JlGanesa 10, Bandung, 40132 (Indonesia); Kusnandar, Ridwan; Sakti, Artadi Pria [Meteorological, Climatological, and Geophysical Agency (MCGA) of Indonesian, Jakarta (Indonesia)

    2015-04-24

    Bali, Sumbawa, and Lombok regions are located in active tectonic influence by Indo-Australia plate subducts beneath Sunda plate in southern part and local back-arc thrust in northern part the region. Some active volcanoes also lie from eastern part of Java, Bali, Lombok and Sumbawa regions. Previous studies have conducted subsurface seismic velocity imaging using regional and global earthquake data around the region. In this study, we used P-arrival time from local earthquake networks compiled by MCGA, Indonesia within time periods of 2009 up to 2013 to determine seismic velocity structure and simultaneously hypocenter adjustment by applying seismic tomography inversion method. For the tomographic inversion procedure, we started from 1-D initial velocity structure. We evaluated the resolution of tomography inversion results through checkerboard test and calculating derivative weigh sum. The preliminary results of tomography inversion show fairly clearly high seismic velocity subducting Indo-Australian and low velocity anomaly around volcano regions. The relocated hypocenters seem to cluster around the local fault system such as back-arc thrust fault in northern part of the region and around local fault in Sumbawa regions. Our local earthquake tomography results demonstrated consistent with previous studies and improved the resolution. For future works, we will determine S-wave velocity structure using S-wave arrival time to enhance our understanding of geological processes and for much better interpretation.

  12. 2011 Tohoku Earthquake and Japan's Nuclear Disaster - Implications for Indian Ocean Rim countries

    Science.gov (United States)

    Chadha, R. K.

    2011-12-01

    The Nuclear disaster in Japan after the M9.0 Tohoku earthquake on March 11, 2011 has elicited global response to have a relook at the safety aspects of the nuclear power plants from all angles including natural hazards like earthquakes and tsunami. Several countries have gone into safety audits of their nuclear programs in view of the experience in Japan. Tectonically speaking, countries located close to subduction zones or in direct line of impact of the subduction zones are the most vulnerable to earthquake or tsunami hazard, as these regions are the locale of great tsunamigenic earthquakes. The Japan disaster has also cautioned to the possibility of great impact to the critical structures along the coasts due to other ocean processes caused by ocean-atmosphere interactions and also due to global warming and sea level rise phenomena in future. This is particular true for island countries. The 2011 Tohoku earthquake in Japan will be remembered more because of its nuclear tragedy and tsunami rather than the earthquake itself. The disaster happened as a direct impact of a tsunami generated by the earthquake 130 km off the coast of Sendai in the Honshu region of Japan. The depth of the earthquake was about 25 km below the ocean floor and it occurred on a thrust fault causing a displacement of more than 20 meters. At few places, water is reported to have inundated areas up to 8-10 km inland. The height of the tsunami varied between 10 and 3 meters along the coast. Generally, during an earthquake damage to buildings or other structures occur due to strong shaking which is expressed in the form of ground accelerations 'g'. Although, Peak Ground Accelerations (PGA) consistently exceeded 2g at several places from Sendai down south, structures at the Fukushima Daiichi Nuclear Power Plant did not collapse due to the earthquake. In the Indian Ocean Rim countries, Indian, Pakistan and South Africa are the three countries where Nuclear power plants are operational, few of them

  13. A numerical library in Java for scientists and engineers

    CERN Document Server

    Lau, Hang T

    2003-01-01

    At last researchers have an inexpensive library of Java-based numeric procedures for use in scientific computation. The first and only book of its kind, A Numeric Library in Java for Scientists and Engineers is a translation into Java of the library NUMAL (NUMerical procedures in ALgol 60). This groundbreaking text presents procedural descriptions for linear algebra, ordinary and partial differential equations, optimization, parameter estimation, mathematical physics, and other tools that are indispensable to any dynamic research group. The book offers test programs that allow researchers to execute the examples provided; users are free to construct their own tests and apply the numeric procedures to them in order to observe a successful computation or simulate failure. The entry for each procedure is logically presented, with name, usage parameters, and Java code included. This handbook serves as a powerful research tool, enabling the performance of critical computations in Java. It stands as a cost-effi...

  14. Practical Analysis of the Dynamic Characteristics of JavaScript

    OpenAIRE

    Wei, Shiyi

    2015-01-01

    JavaScript is a dynamic object-oriented programming language, which is designed with flexible programming mechanisms. JavaScript is widely used in developing sophisticated software systems, especially web applications. Despite of its popularity, there is a lack of software tools that support JavaScript for software engineering clients. Dataflow analysis approximates software behavior by analyzing the program code; it is the foundation for many software tools. However, several unique features...

  15. Java-Based Coupling for Parallel Predictive-Adaptive Domain Decomposition

    Directory of Open Access Journals (Sweden)

    Cécile Germain‐Renaud

    1999-01-01

    Full Text Available Adaptive domain decomposition exemplifies the problem of integrating heterogeneous software components with intermediate coupling granularity. This paper describes an experiment where a data‐parallel (HPF client interfaces with a sequential computation server through Java. We show that seamless integration of data‐parallelism is possible, but requires most of the tools from the Java palette: Java Native Interface (JNI, Remote Method Invocation (RMI, callbacks and threads.

  16. Java facilities in processing XML files - JAXB and generating PDF reports

    Directory of Open Access Journals (Sweden)

    Danut-Octavian SIMION

    2008-01-01

    Full Text Available The paper presents the Java programming language facilities in working with XML files using JAXB (The Java Architecture for XML Binding technology and generating PDF reports from XML files using Java objects. The XML file can be an existing one and could contain the data about an entity (Clients for example or it might be the result of a SELECT-SQL statement. JAXB generates JAVA classes through xs rules and a Marshalling, Unmarshalling compiler. The PDF file is build from a XML file and uses XSL-FO formatting file and a Java ResultSet object.

  17. Recent Intermediate Depth Earthquakes in El Salvador, Central Mexico, Cascadia and South-West Japan

    Science.gov (United States)

    Lemoine, A.; Gardi, A.; Gutscher, M.; Madariaga, R.

    2001-12-01

    We studied occurence and source parameters of several recent intermediate depth earthquakes. We concentrated on the Mw=7.7 salvadorian earthquake which took place on January 13, 2001. It was a good example of the high seismic risk associated to such kind of events which occur closer to the coast than the interplate thrust events. The Salvadorian earthquake was an intermediate depth downdip extensional event which occured inside the downgoing Cocos plate, next to the downdip flexure where the dip increases sharply before the slab sinks more steeply. This location corresponds closely to the position of the Mw=5.7 1996 and Mw=7.3 1982 downdip extensional events. Several recent intermediate depth earthquakes occured in subduction zones exhibiting a ``flat slab'' geometry with three distinct flexural bends where flexural stress may be enhanced. The Mw=6.7 Geiyo event showed a downdip extensional mechanism with N-S striking nodal planes. This trend was highly oblique to the trench (Nankai Trough), yet consistent with westward steepening at the SW lateral termination of the SW Japan flat slab. The Mw=6.8 Olympia earthquake in the Cascadia subduction zone occured at the downdip termination of the Juan de Fuca slab, where plate dip increases from about 5o to over 30o. The N-S orientation of the focal planes, parallel to the trench indicated downdip extension. The location at the downdip flexure corresponds closely to the estimated positions of the 1949 M7.1 Olympia and 1965 M6.5 Seattle-Tacoma events. Between 1994 and 1999, in Central Mexico, an unusually high intermediate depth seismicity occured where several authors proposed a flat geometry for the Cocos plate. Seven events of magnitude between Mw=5.9 and Mw=7.1 occured. Three of them were downdip compressional and four where down-dip extensional. We can explain these earthquakes by flexural stresses at down-dip and lateral terminations of the supposed flat segment. Even if intermediate depth earthquakes occurence could

  18. New insight into the 1556 M8 Huaxian earthquake in China

    Science.gov (United States)

    Ma, J.

    2017-12-01

    The disastrous 1556 M8 Huaxian earthquake in China took away 0.8Ma lives then as well as attracted scientists' attention. Although the Huashan front fault and Weinan plateform-front fault at the south margin of Weihe basin was responsible for this earthquake, we know less about the fault behaviors. There's evidence that the modern riverbank offset and older geomorphic scarps in Chishui river site on Weinan plateau-front fault from the Pleiades DEM. Here, we did a 3D trench excavation model using SfM work, drilling profiles and geomorphological measurement there to revive the site for multiearthquakes. It turns out two events occurred on the normal fault with pretty high offsets 9.4m and 7.8-8.0m respectively, the later one resulted from Huaxian earthquake. And we estimate that the fault slip rate approximately 1.48-1.75 mm/a. Thus, we find that the older earthquake also produced a similar fault offsets to the 1556 earthquake showing as characteristics earthquake. The paleoseismic study demonstrates that the Weinan pateform-front fault plays a role in boundary faults of Weihe basin, which can contribute to the basin evolution of regions of active faulting.

  19. Charles Darwin's earthquake reports

    Science.gov (United States)

    Galiev, Shamil

    2010-05-01

    As it is the 200th anniversary of Darwin's birth, 2009 has also been marked as 170 years since the publication of his book Journal of Researches. During the voyage Darwin landed at Valdivia and Concepcion, Chile, just before, during, and after a great earthquake, which demolished hundreds of buildings, killing and injuring many people. Land was waved, lifted, and cracked, volcanoes awoke and giant ocean waves attacked the coast. Darwin was the first geologist to observe and describe the effects of the great earthquake during and immediately after. These effects sometimes repeated during severe earthquakes; but great earthquakes, like Chile 1835, and giant earthquakes, like Chile 1960, are rare and remain completely unpredictable. This is one of the few areas of science, where experts remain largely in the dark. Darwin suggested that the effects were a result of ‘ …the rending of strata, at a point not very deep below the surface of the earth…' and ‘…when the crust yields to the tension, caused by its gradual elevation, there is a jar at the moment of rupture, and a greater movement...'. Darwin formulated big ideas about the earth evolution and its dynamics. These ideas set the tone for the tectonic plate theory to come. However, the plate tectonics does not completely explain why earthquakes occur within plates. Darwin emphasised that there are different kinds of earthquakes ‘...I confine the foregoing observations to the earthquakes on the coast of South America, or to similar ones, which seem generally to have been accompanied by elevation of the land. But, as we know that subsidence has gone on in other quarters of the world, fissures must there have been formed, and therefore earthquakes...' (we cite the Darwin's sentences following researchspace. auckland. ac. nz/handle/2292/4474). These thoughts agree with results of the last publications (see Nature 461, 870-872; 636-639 and 462, 42-43; 87-89). About 200 years ago Darwin gave oneself airs by the

  20. Near real-time aftershock hazard maps for earthquakes

    Science.gov (United States)

    McCloskey, J.; Nalbant, S. S.

    2009-04-01

    Stress interaction modelling is routinely used to explain the spatial relationships between earthquakes and their aftershocks. On 28 October 2008 a M6.4 earthquake occurred near the Pakistan-Afghanistan border killing several hundred and causing widespread devastation. A second M6.4 event occurred 12 hours later 20km to the south east. By making some well supported assumptions concerning the source event and the geometry of any likely triggered event it was possible to map those areas most likely to experience further activity. Using Google earth, it would further have been possible to identify particular settlements in the source area which were particularly at risk and to publish their locations globally within about 3 hours of the first earthquake. Such actions could have significantly focused the initial emergency response management. We argue for routine prospective testing of such forecasts and dialogue between social and physical scientists and emergency response professionals around the practical application of these techniques.

  1. Safety-critical Java on a time-predictable processor

    DEFF Research Database (Denmark)

    Korsholm, Stephan E.; Schoeberl, Martin; Puffitsch, Wolfgang

    2015-01-01

    For real-time systems the whole execution stack needs to be time-predictable and analyzable for the worst-case execution time (WCET). This paper presents a time-predictable platform for safety-critical Java. The platform consists of (1) the Patmos processor, which is a time-predictable processor......; (2) a C compiler for Patmos with support for WCET analysis; (3) the HVM, which is a Java-to-C compiler; (4) the HVM-SCJ implementation which supports SCJ Level 0, 1, and 2 (for both single and multicore platforms); and (5) a WCET analysis tool. We show that real-time Java programs translated to C...... and compiled to a Patmos binary can be analyzed by the AbsInt aiT WCET analysis tool. To the best of our knowledge the presented system is the second WCET analyzable real-time Java system; and the first one on top of a RISC processor....

  2. Sawja: Static Analysis Workshop for Java

    Science.gov (United States)

    Hubert, Laurent; Barré, Nicolas; Besson, Frédéric; Demange, Delphine; Jensen, Thomas; Monfort, Vincent; Pichardie, David; Turpin, Tiphaine

    Static analysis is a powerful technique for automatic verification of programs but raises major engineering challenges when developing a full-fledged analyzer for a realistic language such as Java. Efficiency and precision of such a tool rely partly on low level components which only depend on the syntactic structure of the language and therefore should not be redesigned for each implementation of a new static analysis. This paper describes the Sawja library: a static analysis workshop fully compliant with Java 6 which provides OCaml modules for efficiently manipulating Java bytecode programs. We present the main features of the library, including i) efficient functional data-structures for representing a program with implicit sharing and lazy parsing, ii) an intermediate stack-less representation, and iii) fast computation and manipulation of complete programs. We provide experimental evaluations of the different features with respect to time, memory and precision.

  3. The r-Java 2.0 code: nuclear physics

    Science.gov (United States)

    Kostka, M.; Koning, N.; Shand, Z.; Ouyed, R.; Jaikumar, P.

    2014-08-01

    Aims: We present r-Java 2.0, a nucleosynthesis code for open use that performs r-process calculations, along with a suite of other analysis tools. Methods: Equipped with a straightforward graphical user interface, r-Java 2.0 is capable of simulating nuclear statistical equilibrium (NSE), calculating r-process abundances for a wide range of input parameters and astrophysical environments, computing the mass fragmentation from neutron-induced fission and studying individual nucleosynthesis processes. Results: In this paper we discuss enhancements to this version of r-Java, especially the ability to solve the full reaction network. The sophisticated fission methodology incorporated in r-Java 2.0 that includes three fission channels (beta-delayed, neutron-induced, and spontaneous fission), along with computation of the mass fragmentation, is compared to the upper limit on mass fission approximation. The effects of including beta-delayed neutron emission on r-process yield is studied. The role of Coulomb interactions in NSE abundances is shown to be significant, supporting previous findings. A comparative analysis was undertaken during the development of r-Java 2.0 whereby we reproduced the results found in the literature from three other r-process codes. This code is capable of simulating the physical environment of the high-entropy wind around a proto-neutron star, the ejecta from a neutron star merger, or the relativistic ejecta from a quark nova. Likewise the users of r-Java 2.0 are given the freedom to define a custom environment. This software provides a platform for comparing proposed r-process sites.

  4. The Operational Semantics of a Java Secure Processor

    NARCIS (Netherlands)

    Hartel, Pieter H.; Butler, M.J.; Levy, M.; Alves-Foss, J.

    1999-01-01

    A formal specification of a Java Secure Processor is presented, which is mechanically checked for type consistency, well formedness and operational conservativity. The specification is executable and it is used to animate and study the behaviour of sample Java programs. The purpose of the semantics

  5. Safety-critical Java for low-end embedded platforms

    DEFF Research Database (Denmark)

    Søndergaard, Hans; Korsholm, Stephan E.; Ravn, Anders Peter

    2012-01-01

    We present an implementation of the Safety-Critical Java profile (SCJ), targeted for low-end embedded platforms with as little as 16 kB RAM and 256 kB flash. The distinctive features of the implementation are a combination of a lean Java virtual machine (HVM), with a bare metal kernel implementing...... hardware objects, first level interrupt handlers, and native variables, and an infrastructure written in Java which is minimized through program specialization. The HVM allows the implementation to be easily ported to embedded platforms which have a C compiler as part of the development environment...

  6. Stress Regime in the Nepalese Himalaya from Recent Earthquakes.

    Science.gov (United States)

    Pant, M.; Karplus, M. S.; Velasco, A. A.; Nabelek, J.; Kuna, V. M.; Ghosh, A.; Mendoza, M.; Adhikari, L. B.; Sapkota, S. N.; Klemperer, S. L.; Patlan, E.

    2017-12-01

    The two recent earthquakes, April 25, 2015 Mw 7.8 (Gorkha earthquake) and May 12, 2015 Mw 7.2, at the Indo-Eurasian plate margin killed thousands of people and caused billion dollars of property loss. In response to these events, we deployed a dense array of seismometers to record the aftershocks along Gorkha earthquake rupture area. Our network NAMASTE (Nepal Array Measuring Aftershock Seismicity Trailing Earthquake) included 45 different seismic stations (16 short period, 25 broadband, and 4 strong motion sensors) covering a large area from north-central Nepal to south of the Main Frontal Thrust at a spacing of 20 km. The instruments recorded aftershocks from June 2015 to May 2016. We used time domain short term average (STA) and long term average (LTA) algorithms (1/10s and 4/40s) respectively to detect the arrivals and then developed an earthquake catalog containing 9300 aftershocks. We are manually picking the P-wave first motion arrival polarity to develop a catalog of focal mechanisms for the larger magnitude (>M3.0) events with adequate (>10) arrivals. We hope to characterize the seismicity and stress mechanisms of the complex fault geometries in the Nepalese Himalaya and to address the geophysical processes controlling seismic cycles in the Indo-Eurasian plate margin.

  7. High precision relocation of earthquakes at Iliamna Volcano, Alaska

    Science.gov (United States)

    Statz-Boyer, P.; Thurber, C.; Pesicek, J.; Prejean, S.

    2009-01-01

    In August 1996, a period of elevated seismicity commenced beneath Iliamna Volcano, Alaska. This activity lasted until early 1997, consisted of over 3000 earthquakes, and was accompanied by elevated emissions of volcanic gases. No eruption occurred and seismicity returned to background levels where it has remained since. We use waveform alignment with bispectrum-verified cross-correlation and double-difference methods to relocate over 2000 earthquakes from 1996 to 2005 with high precision (~ 100??m). The results of this analysis greatly clarify the distribution of seismic activity, revealing distinct features previously hidden by location scatter. A set of linear earthquake clusters diverges upward and southward from the main group of earthquakes. The events in these linear clusters show a clear southward migration with time. We suggest that these earthquakes represent either a response to degassing of the magma body, circulation of fluids due to exsolution from magma or heating of ground water, or possibly the intrusion of new dikes beneath Iliamna's southern flank. In addition, we speculate that the deeper, somewhat diffuse cluster of seismicity near and south of Iliamna's summit indicates the presence of an underlying magma body between about 2 and 4??km depth below sea level, based on similar features found previously at several other Alaskan volcanoes. ?? 2009 Elsevier B.V.

  8. MATLAB-Like Scripting of Java Scientific Libraries in ScalaLab

    Directory of Open Access Journals (Sweden)

    Stergios Papadimitriou

    2014-01-01

    Full Text Available Although there are a lot of robust and effective scientific libraries in Java, the utilization of these libraries in pure Java is difficult and cumbersome, especially for the average scientist that does not expertise in software development. We illustrate that ScalaLab presents an easier and productive MATLAB like front end. Also, the main strengths and weaknesses of the core Java libraries of ScalaLab are elaborated. Since performance is of paramount importance for scientific computation, the article discusses extensively performance aspects of the ScalaLab environment. Also, Java bytecode performance is compared to native code.

  9. JavaScript and jQuery for data analysis and visualization

    CERN Document Server

    Raasch, Jon; Ogievetsky, Vadim; Lowery, Joseph

    2014-01-01

    Go beyond design concepts-build dynamic data visualizations using JavaScript JavaScript and jQuery for Data Analysis and Visualization goes beyond design concepts to show readers how to build dynamic, best-of-breed visualizations using JavaScript-the most popular language for web programming. The authors show data analysts, developers, and web designers how they can put the power and flexibility of modern JavaScript libraries to work to analyze data and then present it using best-of-breed visualizations. They also demonstrate the use of each technique with real-world use cases, showing how to

  10. Sample Development on Java Smart-Card Electronic Wallet Application

    OpenAIRE

    Toma Cristian

    2009-01-01

    In this paper, are highlighted concepts as: complete Java card application, life cycle of an applet, and a practical electronic wallet sample implemented in Java card technology. As a practical approach it would be interesting building applets for ID, Driving License, Health-Insurance smart cards, for encrypt and digitally sign documents, for E-Commerce and for accessing critical resources in government and military field. The end of this article it is presented a java card electronic wallet ...

  11. Overview of the geologic effects of the November 14, 2016, Mw 7.8 Kaikoura, New Zealand, earthquake

    Science.gov (United States)

    Jibson, Randall W.; Allstadt, Kate E.; Rengers, Francis K.; Godt, Jonathan W.

    2018-03-30

    The November 14, 2016, Kaikoura, New Zealand, earthquake (moment magnitude [Mw] 7.8) triggered more than 10,000 landslides over an area of about 12,000 square kilometers in the northeastern part of the South Island of New Zealand. In collaboration with GNS Science (the Institute of Geological and Nuclear Science Limited), we conducted ground and helicopter reconnaissance of the affected areas and assisted in rapid hazard evaluation. The majority of the triggered landslides were shallow- to moderate-depth (1–10 meters), highly disrupted falls and slides in rock and debris from Lower Cretaceous graywacke sandstone in the Seaward Kaikoura Range. Deeper, more coherent landslides in weak Upper Cretaceous to Neogene sedimentary rock also were numerous in the gentler topography south and inland (west) of the Seaward Kaikoura Range. The principal ground-failure hazards from the earthquake were the hundreds of valley-blocking landslides, many of which impounded lakes and ponds that posed potential downstream flooding hazards. Both large and small landslides also blocked road and rail corridors in many locations, including the main north-south highway (State Highway 1), which was still closed in October 2017. As part of our investigation, we compared post-earthquake field observations to the output of models used to estimate near-real-time landslide probabilities following earthquakes. The models generally over-predicted landslide occurrence and thus need further refinement.

  12. Foraminiferal record of Holocene paleo-earthquakes on the subsiding south-western Poverty Bay coastline, New Zealand

    International Nuclear Information System (INIS)

    Hayward, B.W.; Sabaa, A.T.; Grenfell, H.R.; Cochran, U.A.; Clark, K.J.; Litchfield, N.J.; Wallace, L.M.; Marden, M.; Palmer, A.S.

    2015-01-01

    Foraminiferal faunas in 29 short cores (maximum depth 7 m) of estuarine and coastal wetland sediment were used to reconstruct the middle-late Holocene (last 7 ka) elevational history on the southern shores of Poverty Bay, North Island, New Zealand. This coast is on the southwest side of a rapidly subsiding area beneath western Poverty Bay. Modern Analogue Technique paleo-elevation estimates based on fossil foraminiferal faunas indicate that the four study areas have gradual late Holocene (<3.5 ka) subsidence rates that increase from the southwest (mean c. 0.5 m ka - - 1 ) to northeast (mean c. 1.0 m ka -1 ). Only two rapid, possibly co-seismic, vertical displacement events are recognised: (1) c. 1.2 m of subsidence at 5.7 ± 0.4 ka (cal yr BP), which may have been generated by a subduction interface earthquake centred offshore and recorded in other published studies in northern Hawkes Bay, c. 35 km to the south; and (2) c. 1 m of uplift (relative sea-level fall) at c. 4.5 ± 0.3 ka, which might have been generated by rupture on an offshore upper plate fault that also uplifted coastal terraces at Pakarae and Mahia, 40 km to the north and south of the study area, or by rupture on the subduction interface penetrating beneath Poverty Bay. No sudden displacement events are recognised during the last 4 ka although subsidence, possibly aseismic, has continued. (author).

  13. Model checking a cache coherence protocol for a Java DSM implementation

    NARCIS (Netherlands)

    J. Pang; W.J. Fokkink (Wan); R. Hofman (Rutger); R. Veldema

    2007-01-01

    textabstractJackal is a fine-grained distributed shared memory implementation of the Java programming language. It aims to implement Java's memory model and allows multithreaded Java programs to run unmodified on a distributed memory system. It employs a multiple-writer cache coherence

  14. How farmers cope : case studies of decision-making in six farm households in south of Malang, East Java

    NARCIS (Netherlands)

    Wahab, S.A.

    1996-01-01


    This thesis is about decision-making in six farm households in East Java. The research carried out uses the case study approach and focuses on the intellectual locus of the actors who took decisions. The indigenous knowledge and the way it is generated and used by farmers when they make

  15. Chip-Multiprocessor Hardware Locks for Safety-Critical Java

    DEFF Research Database (Denmark)

    Strøm, Torur Biskopstø; Puffitsch, Wolfgang; Schoeberl, Martin

    2013-01-01

    and may void a task set's schedulability. In this paper we present a hardware locking mechanism to reduce the synchronization overhead. The solution is implemented for the chip-multiprocessor version of the Java Optimized Processor in the context of safety-critical Java. The implementation is compared...

  16. Evaluation of Static JavaScript Call Graph Algorithms

    NARCIS (Netherlands)

    J.-J. Dijkstra (Jorryt-Jan)

    2014-01-01

    htmlabstractThis thesis consists of a replication study in which two algorithms to compute JavaScript call graphs have been implemented and evaluated. Existing IDE support for JavaScript is hampered due to the dynamic nature of the language. Previous studies partially solve call graph computation

  17. Java for Cost Effective Embedded Real-Time Software

    DEFF Research Database (Denmark)

    Korsholm, Stephan Erbs

    2012-01-01

    This thesis presents the analysis, design and implementation of the Hardware near Virtual Machine (HVM) - a Java virtual machine for embedded devices. The HVM supports the execution of Java programs on low-end embedded hard- ware environments with as little as a few kB of RAM and 32 kB of ROM....... The HVM is based on a Java-to-C translation mechanism and it produces selfcontained, strict ANSI-C code that has been specially crafted to allow it to be embedded into existing C based build and execution environments; environ- ments which may be based on non standard C compilers and libraries. The HVM...... does not require a POSIX-like OS, nor does it require a C runtime library to be present for the target. The main distinguishing feature of the HVM is to support the stepwise addition of Java into an existing C based build and execution environment for low-end embedded systems. This will allow...

  18. Java for Cost Effective Embedded Real-Time Software

    DEFF Research Database (Denmark)

    Korsholm, Stephan

    This thesis presents the analysis, design and implementation of the Hardware near Virtual Machine (HVM) - a Java virtual machine for embedded devices. The HVM supports the execution of Java programs on low-end embedded hard- ware environments with as little as a few kB of RAM and 32 kB of ROM....... The HVM is based on a Java-to-C translation mechanism and it produces self- contained, strict ANSI-C code that has been specially crafted to allow it to be embedded into existing C based build and execution environments; environ- ments which may be based on non standard C compilers and libraries. The HVM...... does not require a POSIX-like OS, nor does it require a C runtime library to be present for the target. The main distinguishing feature of the HVM is to support the stepwise addition of Java into an existing C based build and execution environment for low-end embedded systems. This will allow...

  19. Atmospheric sulfur and nitrogen in West Java

    International Nuclear Information System (INIS)

    Ayers, G.P.; Gillett, R.W.; Ginting, N.; Hopper, M.; Selleck, P.W.; Tapper, N.

    1995-01-01

    Wet-only rainwater composition on a weekly basis was determined at four sites in West Java, Indonesia, from June 1991 to June 1992. Three sites were near the extreme western end of Java, surrounding a coal-fired power station at Suralaya. The fourth site was ∼ 100 km to the east in the Indonesian capital, Jakarta. Over the 12 months study period wet deposition of sulfate at the three western sites varied between 32-46 meq m -2 while nitrate varied between 10-14 meq m -2 . Wet deposition at the Jakarta site was systematically higher, at 56 meq m -2 for sulfate and 20 meq m -2 for nitrate. Since sulfate and nitrate wet deposition fluxes in the nearby and relatively unpopulated regions of typical Australia are both only ∼ 5 meq m -2 anthropogenic emissions of S and N apparently cause significant atmospheric acidification in Java. It is possible that total acid deposition fluxes (of S and N) in parts of Java are comparable with those responsible for environmental degradation in acid-sensitive parts of Europe and North America. 19 refs., 3 tabs

  20. MzJava: An open source library for mass spectrometry data processing.

    Science.gov (United States)

    Horlacher, Oliver; Nikitin, Frederic; Alocci, Davide; Mariethoz, Julien; Müller, Markus; Lisacek, Frederique

    2015-11-03

    Mass spectrometry (MS) is a widely used and evolving technique for the high-throughput identification of molecules in biological samples. The need for sharing and reuse of code among bioinformaticians working with MS data prompted the design and implementation of MzJava, an open-source Java Application Programming Interface (API) for MS related data processing. MzJava provides data structures and algorithms for representing and processing mass spectra and their associated biological molecules, such as metabolites, glycans and peptides. MzJava includes functionality to perform mass calculation, peak processing (e.g. centroiding, filtering, transforming), spectrum alignment and clustering, protein digestion, fragmentation of peptides and glycans as well as scoring functions for spectrum-spectrum and peptide/glycan-spectrum matches. For data import and export MzJava implements readers and writers for commonly used data formats. For many classes support for the Hadoop MapReduce (hadoop.apache.org) and Apache Spark (spark.apache.org) frameworks for cluster computing was implemented. The library has been developed applying best practices of software engineering. To ensure that MzJava contains code that is correct and easy to use the library's API was carefully designed and thoroughly tested. MzJava is an open-source project distributed under the AGPL v3.0 licence. MzJava requires Java 1.7 or higher. Binaries, source code and documentation can be downloaded from http://mzjava.expasy.org and https://bitbucket.org/sib-pig/mzjava. This article is part of a Special Issue entitled: Computational Proteomics. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Model checking a cache coherence protocol of a Java DSM implementation

    NARCIS (Netherlands)

    Pang, J.; Fokkink, W.J.; Hofman, R.; Veldema, R.S.

    2007-01-01

    Jackal is a fine-grained distributed shared memory implementation of the Java programming language. It aims to implement Java's memory model and allows multithreaded Java programs to run unmodified on a distributed memory system. It employs a multiple-writer cache coherence protocol. In this paper,

  2. Almost stochastic dominance for poverty level in Central Java Province

    Science.gov (United States)

    Slamet, Isnandar; Agus Wibowo, Aryanto; Roswitha, Mania

    2017-12-01

    The criteria for the domination of the distribution function has been used in the investment issues, momentum, agricultural production, and so on. One criteria of domination is stochastic dominance (SD). When this criteria is applied to the dominating area that has smaller value than the dominated area, then almost stochastic dominance (ASD) can be used. It this research, we apply the ASD criteria on data of expenditure per capita based on districts/cities in Central Java. Furthermore, we determine which year the expenditure per capita in the period 2009-2013 is the most dominating to know the level of poverty in Central Java. From the discussion, it can be concluded that the expenditure per capita in Central Java in 2013 dominates expenditure per capita in Central Java in 2009-2012. In other words, the level of poverty in Central Java in 2013 is lower than in 2009-2012.

  3. A real-time Java tool chain for resource constrained platforms

    DEFF Research Database (Denmark)

    Korsholm, Stephan Erbs; Søndergaard, Hans; Ravn, Anders P.

    2013-01-01

    The Java programming language was originally developed for embedded systems, but the resource requirements of previous and current Java implementations - especially memory consumption - tend to exclude them from being used on a significant class of resource constrained embedded platforms. The con......The Java programming language was originally developed for embedded systems, but the resource requirements of previous and current Java implementations - especially memory consumption - tend to exclude them from being used on a significant class of resource constrained embedded platforms...... by integrating: (1) a lean virtual machine (HVM) without any external dependencies on POSIX-like libraries or other OS functionalities, (2) a hardware abstraction layer, implemented almost entirely in Java through the use of hardware objects, first level interrupt handlers, and native variables, and (3....... An evaluation of the presented solution shows that the miniCDj benchmark gets reduced to a size where it can run on resource constrained platforms....

  4. JavaScript: Data Visualizations

    Science.gov (United States)

    D3 is a JavaScript library that, in a manner similar to jQuery library, allows direct inspection and manipulation of the Document Object Model, but is intended for the primary purpose of data visualization.

  5. Fast simulation and topological vertex finding in JAVA

    International Nuclear Information System (INIS)

    Walkowiak, Wolfgang

    2001-01-01

    An overview of the fast Monte Carlo simulation for NLC detector studies as currently provided in the Java Analysis Studio environment is presented. Special emphasis is given to the simulation of tracks. In addition, the SLD collaboration's topological vertex finding algorithm (ZVTOP) has been implemented in the Java Analysis Studio framework

  6. Improving Tools for JavaScript Programmers (Position Paper)

    DEFF Research Database (Denmark)

    Andreasen, Esben; Feldthaus, Asger; Jensen, Simon Holm

    We present an overview of three research projects that all aim to provide better tools for JavaScript web application programmers1: TAJS, which infers static type information for JavaScript applications using dataflow analysis; JSRefac- tor, which enables sound code refactorings; and Artemis, which...... provides high-coverage automated testing....

  7. Spatiotemporal Analysis of the Foreshock-Mainshock-Aftershock Sequence of the 6 July 2017 M5.8 Lincoln, Montana Earthquake

    Science.gov (United States)

    McMahon, N. D.; Stickney, M.; Aster, R. C.; Yeck, W.; Martens, H. R.; Benz, H.

    2017-12-01

    On 6 July 2017, a Mw 5.8 earthquake occurred 11 km southeast of Lincoln, Montana. The event was widely-felt from Edmonton, Alberta, Canada (750 km north), Seattle, Washington (800 km west), the Idaho/Utah and Idaho/Nevada borders (550 km south), and Rapid City, South Dakota (750 km east). This is the largest earthquake to occur in the state since the 1959 M 7.3 Hebgen Lake event 250 km to the southeast. In the three weeks following the 6 July 2017 Mw 5.8 main shock, the U.S. Geological Survey and Montana Bureau of Mines and Geology located more than 300 aftershocks. Preliminary observations show most of these aftershocks form a short NNE zone that suggests that the main shock may have slipped on a NNE left-lateral fault. A smaller number of aftershocks extend along a longer WNW-trending zone. These faults are part of the Lewis and Clark line, a prominent zone of Middle Proterozoic to Holocene age strike-slip, dip slip, and oblique slip faulting trending 400 km east-southeast from northern Idaho to east of Helena, Montana, and terminating southeast of this earthquake. We use identified aftershock waveforms as templates to examine the data from 1 June 2017 through 27 July 2017 with cross-correlation techniques on nearby permanent and temporary seismic stations deployed shortly after the mainshock to identify foreshocks and additional small aftershocks. Locating these events allows us to study subsurface geology, map fault structures, and provide insight on the spatial and temporal evolution of the earthquake sequence, which may continue to produce aftershocks for years. Other notable earthquakes in the region include a damaging M 6.6 earthquake 100 km to the south in June 1925, M 6.2 and M 6.0 earthquakes near Helena, Montana in October 1935 that caused significant damage and four fatalities, and a M 5.6 earthquake 170 km to the south in July 2005 that caused minor damage in Dillon and the surrounding region. We hope this work not only allows us to map the involved

  8. Baseline geophysical data for hazard management in coastal areas in relation to earthquakes and tsunamis

    Digital Repository Service at National Institute of Oceanography (India)

    Murthy, K.S.R.

    is another factor for some of the intraplate earthquakes in the South Indian Shield, which includes the Eastern and Western Continental Margins of India. Baseline geophysical data for hazard management in coastal areas in relation to earthquakes... surge. Keywords Hazard management, marine geophysical data, geomorphology and tsunami surge, coastal seismicity Date received: 7 August 2015; accepted: 15 October 2015 CSIR – National Institute of Oceanography, Visakhapatnam, India Corresponding author...

  9. Worst-Case Execution Time Based Optimization of Real-Time Java Programs

    DEFF Research Database (Denmark)

    Hepp, Stefan; Schoeberl, Martin

    2012-01-01

    optimization is method in lining. It is especially important for languages, like Java, where small setter and getter methods are considered good programming style. In this paper we present and explore WCET driven in lining of Java methods. We use the WCET analysis tool for the Java processor JOP to guide...

  10. A real-time Java tool chain for resource constrained platforms

    DEFF Research Database (Denmark)

    Korsholm, Stephan E.; Søndergaard, Hans; Ravn, Anders Peter

    2014-01-01

    The Java programming language was originally developed for embedded systems, but the resource requirements of previous and current Java implementations – especially memory consumption – tend to exclude them from being used on a significant class of resource constrained embedded platforms. The con......The Java programming language was originally developed for embedded systems, but the resource requirements of previous and current Java implementations – especially memory consumption – tend to exclude them from being used on a significant class of resource constrained embedded platforms...... by integrating the following: (1) a lean virtual machine without any external dependencies on POSIX-like libraries or other OS functionalities; (2) a hardware abstraction layer, implemented almost entirely in Java through the use of hardware objects, first level interrupt handlers, and native variables; and (3....... An evaluation of the presented solution shows that the miniCDj benchmark gets reduced to a size where it can run on resource constrained platforms....

  11. Interprocess Communication with Java in a Microsoft Windows Environment

    Directory of Open Access Journals (Sweden)

    Dylan Gregory Smith

    2017-12-01

    Full Text Available The Java programming language provides a comprehensive set of multithreading programming techniques but currently lacks interprocess communication (IPC facilities, other than slow socket-based communication mechanisms (which are intended primarily for distributed systems, not interprocess communication on a multicore or multiprocessor system. This is problematic due to the ubiquity of modern multicore processors, and the widespread use of Java as a programming language throughout the software development industry. This work aimed to address this problem by utilising Microsoft Windows’ native IPC mechanisms through a framework known as the Java Native Interface. This enabled the use of native C code that invoked the IPC mechanisms provided by Windows, which allowed successful synchronous communication between separate Java processes. The results obtained illustrate the performance dichotomy between socket-based communication and native IPC facilities, with Windows’ facilities providing significantly faster communication. Ultimately, these results show that there are far more effective communication structures available. In addition, this work presents generic considerations that may aid in the eventual design of a generic, platform-independent IPC system for the Java programming language. The fundamental considerations include shared memory with semaphore synchronisation, named pipes and a socket communication model.

  12. A programming and a modelling perspective on the evaluation of Java Card implementations

    OpenAIRE

    Hartel, Pieter H.; de Jong, E.; de Jong, Eduard; Attali, Isabelle; Jensen, Thomas

    2000-01-01

    Java Card Technology has provided a huge step forward in programming smart cards: from assembler to using a high level Object Oriented language. However, the authors have found some differences between the current Java Card version (2.1) and main stream Java that may restrict the benefits of using Java achievable in smartcard programming. In particular, efforts towards evaluating Java Card implementations at a high level of assurance may be hampered by the presence of these differences as wel...

  13. Kala defanged: Managing power in Java away from the centre

    Directory of Open Access Journals (Sweden)

    Andrew Beatty

    2012-09-01

    Full Text Available If discussions of power in Indonesia have been too Java-centric, power talk about Java has been equally overcentralized. This article presents an alternative view to the top-down, hierarchical, exemplary-centre approach of Anderson, Geertz and others: the view from Banyuwangi in East Java. Through an analysis of local rituals, popular theatre and political action it proposes a different model based on consensus, relativism, and ritual containment.

  14. Instant Java password and authentication security

    CERN Document Server

    Mayoral, Fernando

    2013-01-01

    Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. This book takes a hands-on approach to Java-based password hashing and authentication, detailing advanced topics in a recipe format.This book is ideal for developers new to user authentication and password security, and who are looking to get a good grounding in how to implement it in a reliable way.It's assumed that the reader will have some experience in Java already, as well as being familiar with the basic idea behind user authentication.

  15. ROOT I/O in JavaScript

    International Nuclear Information System (INIS)

    Bellenot, Bertrand

    2012-01-01

    ROOT is used by almost all experiments throughout High Energy and Nuclear Physics to write, read and analyse data. As use of mobile devices (tablets, smart phones) is becoming more and more popular, offering a portable way of monitoring or inspecting ROOT files from any web browser, without having to install any application or library on the server side or on the client side is important. To achieve this, a JavaScript I/O library is being developed. The graphic part is done by using a third-party JavaScript visualization library.

  16. Cost Analysis for Real-time Java Scoped-memory Areas

    Directory of Open Access Journals (Sweden)

    Delvin Defoe

    2007-08-01

    Full Text Available Java has recently joined C and C++ as a development platform for real-time and embedded applications. Java's garbage collection, while generally a useful feature, can be problematic for these applications: garbage collection occurs at unpredictable times and its latency is typically unbounded. This can compromise necessary real-time guarantees. To overcome these limitations, the Real-Time for Java Expert Group (RTJEG proposed the Real-Time Specification for Java (RTSJ, which introduced new memory models and new threads to utilize those models. One such memory model uses scoped-memory areas, which work best in the context of a NoHeapRealtimeThread (NHRT. Although much work has been done with scoped-memory areas and NHRTs, there is no system-independent analysis of their costs. In this article we present an asymptotic analysis for RTSJ scoped-memory areas and NHRTs.

  17. The CERN PS/SL Controls Java Application Programming Interface

    International Nuclear Information System (INIS)

    I. Deloose; J. Cuperus; P. Charrue; F. DiMaio; K. Kostro; M. Vanden Eynden; W. Watson

    1999-01-01

    The PS/SL Convergence Project was launched in March 1998. Its objective is to deliver a common control as infrastructure for the CERN accelerators by year 2001. In the framework of this convergence activity, a project was launched to develop a Java Application Programming Interface (API) between programs written in the Java language and the PS and SL accelerator equipment. This Java API was specified and developed in collaboration with TJNAF. It is based on the Java CDEV [1] package that has been extended in order to end up with a CERN/TJNAF common product. It implements a detailed model composed of devices organized in named classes that provide a property-based interface. It supports data subscription and introspection facilities. The device model is presented and the capabilities of the API are described with syntax examples. The software architecture is also described

  18. Creating Electronic Books-Chapters for Computers and Tablets Using Easy Java/JavaScript Simulations, EjsS Modeling Tool

    OpenAIRE

    Wee, Loo Kang

    2015-01-01

    This paper shares my journey (tools used, design principles derived and modeling pedagogy implemented) when creating electronic books-chapters (epub3 format) for computers and tablets using Easy Java/JavaScript Simulations, (old name EJS, new EjsS) Modeling Tool. The theory underpinning this work grounded on learning by doing through dynamic and interactive simulation-models that can be more easily made sense of instead of the static nature of printed materials. I started combining related co...

  19. Java advanced medical image toolkit

    International Nuclear Information System (INIS)

    Saunder, T.H.C.; O'Keefe, G.J.; Scott, A.M.

    2002-01-01

    Full text: The Java Advanced Medical Image Toolkit (jAMIT) has been developed at the Center for PET and Department of Nuclear Medicine in an effort to provide a suite of tools that can be utilised in applications required to perform analysis, processing and visualisation of medical images. jAMIT uses Java Advanced Imaging (JAI) to combine the platform independent nature of Java with the speed benefits associated with native code. The object-orientated nature of Java allows the production of an extensible and robust package which is easily maintained. In addition to jAMIT, a Medical Image VO API called Sushi has been developed to provide access to many commonly used image formats. These include DICOM, Analyze, MINC/NetCDF, Trionix, Beat 6.4, Interfile 3.2/3.3 and Odyssey. This allows jAMIT to access data and study information contained in different medical image formats transparently. Additional formats can be added at any time without any modification to the jAMIT package. Tools available in jAMIT include 2D ROI Analysis, Palette Thresholding, Image Groping, Image Transposition, Scaling, Maximum Intensity Projection, Image Fusion, Image Annotation and Format Conversion. Future tools may include 2D Linear and Non-linear Registration, PET SUV Calculation, 3D Rendering and 3D ROI Analysis. Applications currently using JAMIT include Antibody Dosimetry Analysis, Mean Hemispheric Blood Flow Analysis, QuickViewing of PET Studies for Clinical Training, Pharamcodynamic Modelling based on Planar Imaging, and Medical Image Format Conversion. The use of jAMIT and Sushi for scripting and analysis in Matlab v6.1 and Jython is currently being explored. Copyright (2002) The Australian and New Zealand Society of Nuclear Medicine Inc

  20. WCET Analysis of Java Bytecode Featuring Common Execution Environments

    DEFF Research Database (Denmark)

    Luckow, Kasper Søe; Thomsen, Bent; Frost, Christian

    2011-01-01

    We present a novel tool for statically determining the Worst Case Execution Time (WCET) of Java Bytecode-based programs called Tool for Execution Time Analysis of Java bytecode (TetaJ). This tool differentiates itself from existing tools by separating the individual constituents of the execution...... environment into independent components. The prime benefit is that it can be used for execution environments featuring common embedded processors and software implementations of the JVM. TetaJ employs a model checking approach for statically determining WCET where the Java program, the JVM, and the hardware...

  1. Earthquakes

    Science.gov (United States)

    An earthquake happens when two blocks of the earth suddenly slip past one another. Earthquakes strike suddenly, violently, and without warning at any time of the day or night. If an earthquake occurs in a populated area, it may cause ...

  2. JSME: a free molecule editor in JavaScript.

    Science.gov (United States)

    Bienfait, Bruno; Ertl, Peter

    2013-01-01

    A molecule editor, i.e. a program facilitating graphical input and interactive editing of molecules, is an indispensable part of every cheminformatics or molecular processing system. Today, when a web browser has become the universal scientific user interface, a tool to edit molecules directly within the web browser is essential. One of the most popular tools for molecular structure input on the web is the JME applet. Since its release nearly 15 years ago, however the web environment has changed and Java applets are facing increasing implementation hurdles due to their maintenance and support requirements, as well as security issues. This prompted us to update the JME editor and port it to a modern Internet programming language - JavaScript. The actual molecule editing Java code of the JME editor was translated into JavaScript with help of the Google Web Toolkit compiler and a custom library that emulates a subset of the GUI features of the Java runtime environment. In this process, the editor was enhanced by additional functionalities including a substituent menu, copy/paste, drag and drop and undo/redo capabilities and an integrated help. In addition to desktop computers, the editor supports molecule editing on touch devices, including iPhone, iPad and Android phones and tablets. In analogy to JME the new editor is named JSME. This new molecule editor is compact, easy to use and easy to incorporate into web pages. A free molecule editor written in JavaScript was developed and is released under the terms of permissive BSD license. The editor is compatible with JME, has practically the same user interface as well as the web application programming interface. The JSME editor is available for download from the project web page http://peter-ertl.com/jsme/

  3. THE MAY 23TH 2007 GULF OF MEXICO EARTHQUAKE

    Science.gov (United States)

    Yamamoto, J.; Jimenez, Z.

    2009-12-01

    On the 23th of May 2007 at 14:09 local time (19:09 UT) an insolated earthquake of local magnitude 5.2 occurred offshore northern Veracruz in the Gulf of Mexico. The seismic focus was located using local and regional data at 20.11° N, 97.38° W and 7.8 km depth at 175 km distance from Tuxpan a city of 134,394 inhabitants. The earthquake was widely felt along the costal states of southern Tamaulipas and Veracruz in which several schools and public buildings were evacuated. Neither Laguna Verde nuclear plant, located approximately 245 km from the epicenter, nor PEMEX petroleum company reported damage. First-motion data indicates that the rupture occurred as strike slip faulting along two possible planes, one oriented roughly north-south and the other east-west. In the present paper a global analysis of the earthquake is made to elucidate its origin and possible correlation with known geotectonic features of the region.

  4. Dynamic Learning Objects to Teach Java Programming Language

    Science.gov (United States)

    Narasimhamurthy, Uma; Al Shawkani, Khuloud

    2010-01-01

    This article describes a model for teaching Java Programming Language through Dynamic Learning Objects. The design of the learning objects was based on effective learning design principles to help students learn the complex topic of Java Programming. Visualization was also used to facilitate the learning of the concepts. (Contains 1 figure and 2…

  5. Conversion of the agent-oriented domain-specific language ALAS into JavaScript

    Science.gov (United States)

    Sredojević, Dejan; Vidaković, Milan; Okanović, Dušan; Mitrović, Dejan; Ivanović, Mirjana

    2016-06-01

    This paper shows generation of JavaScript code from code written in agent-oriented domain-specific language ALAS. ALAS is an agent-oriented domain-specific language for writing software agents that are executed within XJAF middleware. Since the agents can be executed on various platforms, they must be converted into a language of the target platform. We also try to utilize existing tools and technologies to make the whole conversion process as simple as possible, as well as faster and more efficient. We use the Xtext framework that is compatible with Java to implement ALAS infrastructure - editor and code generator. Since Xtext supports Java, generation of Java code from ALAS code is straightforward. To generate a JavaScript code that will be executed within the target JavaScript XJAF implementation, Google Web Toolkit (GWT) is used.

  6. Optimizing memory use in Java applications, garbage collectors

    Directory of Open Access Journals (Sweden)

    Ştefan PREDA

    2016-05-01

    Full Text Available Java applications are diverse, depending by use case, exist application that use small amount of memory till application that use huge amount, tens or hundreds of gigabits. Java Virtual Machine is designed to automatically manage memory for applications. Even in this case due diversity of hardware, software that coexist on the same system and applications itself, these automatic decision need to be accompanied by developer or system administrator to triage optimal memory use. After developer big role to write optimum code from memory allocation perspective , optimizing memory use at Java Virtual Machine and application level become in last year's one of the most important task. This is explained in special due increased demand in applications scalability.

  7. The Challenge of Centennial Earthquakes to Improve Modern Earthquake Engineering

    International Nuclear Information System (INIS)

    Saragoni, G. Rodolfo

    2008-01-01

    The recent commemoration of the centennial of the San Francisco and Valparaiso 1906 earthquakes has given the opportunity to reanalyze their damages from modern earthquake engineering perspective. These two earthquakes plus Messina Reggio Calabria 1908 had a strong impact in the birth and developing of earthquake engineering. The study of the seismic performance of some up today existing buildings, that survive centennial earthquakes, represent a challenge to better understand the limitations of our in use earthquake design methods. Only Valparaiso 1906 earthquake, of the three considered centennial earthquakes, has been repeated again as the Central Chile, 1985, Ms = 7.8 earthquake. In this paper a comparative study of the damage produced by 1906 and 1985 Valparaiso earthquakes is done in the neighborhood of Valparaiso harbor. In this study the only three centennial buildings of 3 stories that survived both earthquakes almost undamaged were identified. Since for 1985 earthquake accelerogram at El Almendral soil conditions as well as in rock were recoded, the vulnerability analysis of these building is done considering instrumental measurements of the demand. The study concludes that good performance of these buildings in the epicentral zone of large earthquakes can not be well explained by modern earthquake engineering methods. Therefore, it is recommended to use in the future of more suitable instrumental parameters, such as the destructiveness potential factor, to describe earthquake demand

  8. The evaluation of damage mechanism of unreinforced masonry buildings after Van (2011) and Elazig (2010) Earthquakes

    Science.gov (United States)

    Güney, D.; Aydin, E.; Öztürk, B.

    2015-07-01

    On March 8th, 2010 Karakocan-Elazig earthquake of magnitude 6.0 occurred at a region where masonry and adobe construction is very common. Karakocan-Elazig is located in a high seismicity region on Eastern Anatolian Fault System (EAFS). Due to the earthquake, 42 people were killed and 14’113 buildings were damaged. Another city, Van located at South east of Turkey is hit by earthquakes with M = 7.2 occurred on October 23rd, 2011 at 13:41 (local time), whose epicenter was about 16 km north of Van (Tabanli village) and M = 5.6 on November 9th, 2011 with an epicenter near the town of Edremit, south of Van and caused the loss of life and heavy damages. Both earthquakes killed 644 people and 2608 people were injured. Approximately 10’000 buildings were seriously damaged. There are many traditional types of structures existing in the region hit by earthquakes (both Van and Elazig). These buildings were built as adobe, unreinforced masonry or mixed type. These types of buildings are very common in rural areas (especially south and east) of Turkey because of easy workmanship and cheap construction cost. Many of those traditional type structures experienced serious damages. The use of masonry is very common in some of the world's most hazard-prone regions, such as in Latin America, Africa, the Indian subcontinent and other parts of Asia, the Middle East, and southern Europe. Based on damage and failure mechanism of those buildings, the parameters affecting the seismic performance of those traditional buildings are analyzed in this paper. The foundation type, soil conditions, production method of the masonry blocks, construction method, the geometry of the masonry walls, workmanship quality, existence of wooden beams, type of roof, mortar between adobe blocks are studied in order to understand the reason of damage for these types of buildings.

  9. Inversion of Orkney M5.5 earthquake South Africa using strain meters at very close distances

    Science.gov (United States)

    Yasutomi, T.; Mori, J. J.; Yamada, M.; Ogasawara, H.; Okubo, M.; Ogasawara, H.; Ishida, A.

    2017-12-01

    The largest event recorded in a South African gold mining region, a M5.5 earthquake took place near Orkney on 5 August 2014. The mainshock and afterhocks were recorded by 46 geophones at 2-3 km depths, 3 Ishii borehole strainmeters at 2.9km depth, and 17 surface strong motion instruments at close distances. The upper edge of the planar distribution of aftershock activity dips almost vertically and was only several hundred meters below the sites where the strainmeters were installed. In addition the seismic data, drilling across this fault is now in progress (Jun 2017 to December 2017) and will contribute valuable geological and stress information. Although the geophones data were saturated during the mainshock, the strainmeters recorded clear nearfield waveforms. We try to model the source of the M5.5 mainshock using the nearfield strainmeter data. Two strain meters located at same place, depth at 2.8km. Remaining one is located depth at 2.9km. Distance of each other is only 150m. Located at depth 2.9km recorded large stable strain, on the other hand, located at depth 2.8 km recorded three or four times smaller stable strain than 2.9km. These data indicates the distance between M5.5 fault and 2.9km depth strainmeter is a few hundred meters order. The strain Green functions were calculated assuming an infinite medium and using a finite difference method. We use small aftershocks to verify the Green function. Matching of the waveforms for the small events validates and Green functions used for the mainshock inversion. We present a model of the source rupture using these strain data. The nearfield data provide good resolution of the nearby earthquake rupture. There are two large subevents, one near the hypocenter and the second several hundred meters to the west.

  10. Great earthquake potential in Oregon and Washington: An overview of recent coastal geologic studies and possible segmentation of the central Cascadia subduction zone

    International Nuclear Information System (INIS)

    Nelson, A.R.; Personius, S.F.

    1990-01-01

    Fundamental questions in earthquake hazards research in the Pacific Northwest concern the magnitude and recurrence of great earthquakes in the Cascadia subduction zone in Oregon and Washington. Geologic work of the last few years has produced convincing evidence for coseismic subsidence along the Washington and Oregon coasts. Regional subsidence recorded by estuarine deposits suggests that plate-interface earthquakes of at least M w 8 (>100-km-long ruptures) occurred during the late Holocene in northern Oregon and southern Washington. Differences in the types of coastal marsh sequences between northern and south-central Oregon, however, suggest that regional coastal subsidence does not extend south of about 45.5 degrees N along the Oregon coast. North of this latitude, the coast may intersect the seaward edge of a zone of coseismic subsidence that continues southward onshore. Alternatively, the Cascadia subduction zone is segmented near 44-45 degrees N; a segment boundary at this location would suggest that plate-interface events near M w 8 along the central CSZ would be more frequent than larger (M w 9) events. South of this boundary in the Coos Bay region, the tectonic framework developed through mapping and dating of marine and fluvial terraces indicates that many episodes of abrupt marsh burial in south-central Oregon are best interpreted as the product of deformation on local structures. Some of the local deformation could be associated with moderate earthquakes (M s <6). At most sites in south-central Oregon, however, it is still unclear whether coseismic events were responses to local faulting or folding, to regional deformation during great plate-interface earthquakes, or to both. This study has potential implications for risk assessments for light water reactors in North America

  11. Java expert GUI framework for CERN beam instrumentation systems

    International Nuclear Information System (INIS)

    Bart Pedersen, S.; Bozyigit, S.; Jackson, S.

    2012-01-01

    The CERN Beam Instrumentation Group's software section has recently performed a study of the tools used to produce Java expert GUI (Graphical User Interface) applications. This paper will present the analysis that was made to understand the requirements for generic components and the resulting tools including a collection of Java components that have been made available for a wider audience. The new expert GUI has already given very good results. Users can easily and quickly create a Java project with a pre-defined structure that will allow them to run an application in two mouse clicks. At the same time, they are able to add whatever components they need to libraries that are now common to all. The use of Maven is not completed and has led to some integration problems for our Java software architecture. Nevertheless, the handling of the library dependencies and the archetypes are very useful

  12. Modular VO oriented Java EE service deployer

    Science.gov (United States)

    Molinaro, Marco; Cepparo, Francesco; De Marco, Marco; Knapic, Cristina; Apollo, Pietro; Smareglia, Riccardo

    2014-07-01

    The International Virtual Observatory Alliance (IVOA) has produced many standards and recommendations whose aim is to generate an architecture that starts from astrophysical resources, in a general sense, and ends up in deployed consumable services (that are themselves astrophysical resources). Focusing on the Data Access Layer (DAL) system architecture, that these standards define, in the last years a web based application has been developed and maintained at INAF-OATs IA2 (Italian National institute for Astrophysics - Astronomical Observatory of Trieste, Italian center of Astronomical Archives) to try to deploy and manage multiple VO (Virtual Observatory) services in a uniform way: VO-Dance. However a set of criticalities have arisen since when the VO-Dance idea has been produced, plus some major changes underwent and are undergoing at the IVOA DAL layer (and related standards): this urged IA2 to identify a new solution for its own service layer. Keeping on the basic ideas from VO-Dance (simple service configuration, service instantiation at call time and modularity) while switching to different software technologies (e.g. dismissing Java Reflection in favour of Enterprise Java Bean, EJB, based solution), the new solution has been sketched out and tested for feasibility. Here we present the results originating from this test study. The main constraints for this new project come from various fields. A better homogenized solution rising from IVOA DAL standards: for example the new DALI (Data Access Layer Interface) specification that acts as a common interface system for previous and oncoming access protocols. The need for a modular system where each component is based upon a single VO specification allowing services to rely on common capabilities instead of homogenizing them inside service components directly. The search for a scalable system that takes advantage from distributed systems. The constraints find answer in the adopted solutions hereafter sketched. The

  13. The 2016 south Alboran earthquake (Mw = 6.4): A reactivation of the Ibero-Maghrebian region?

    Science.gov (United States)

    Buforn, E.; Pro, C.; Sanz de Galdeano, C.; Cantavella, J. V.; Cesca, S.; Caldeira, B.; Udías, A.; Mattesini, M.

    2017-08-01

    On 25 January 2016, an earthquake of magnitude Mw = 6.4 occurred at the southern part of the Alboran Sea, between southern Spain and northern Morocco. This shock was preceded by a foreshock (Mw = 5.1) and followed by a long aftershock sequence. Focal mechanism of main shock has been estimated from slip inversion of body waves at teleseismic distances. Solution corresponds to left-lateral strike-slip motion, showing a complex bilateral rupture, formed by two sub-events, with most energy propagating along a plane oriented N30°E plane dipping to the NW. Relocation of larger events of the aftershock series, show two alignments of epicentres in NE-SW and NNE-SSW direction that intersect at the epicentre of the main shock. We have estimated the focal mechanisms of the largest aftershocks from moment tensor inversion at regional distances. We have obtained two families of focal mechanisms corresponding to strike slip for the NNE-SSW alignment and thrusting motion for the NE-SW alignment. Among the faults present in the area the Al Idrisi fault (or fault zone) may be a good candidate for the source of this earthquake. The study of Coulomb Failure Stress shows that it is possible that the 2016 earthquake was triggered by the previous nearby earthquakes of 1994 (Mw = 5.8) and 2004 (Mw = 6.3). The possible seismic reactivation of the central part of the Ibero-Maghrebian region is an open question, but it is clear that the occurrence of the 2016 earthquake confirms that from 1994 the seismicity of central part of IMR is increasing and that focal mechanism of largest earthquakes in this central part correspond to complex ruptures (or zone of fault).

  14. Ground Motion Prediction for Great Interplate Earthquakes in Kanto Basin Considering Variation of Source Parameters

    Science.gov (United States)

    Sekiguchi, H.; Yoshimi, M.; Horikawa, H.

    2011-12-01

    Broadband ground motions are estimated in the Kanto sedimentary basin which holds Tokyo metropolitan area inside for anticipated great interplate earthquakes along surrounding plate boundaries. Possible scenarios of great earthquakes along Sagami trough are modeled combining characteristic properties of the source area and adequate variation in source parameters in order to evaluate possible ground motion variation due to next Kanto earthquake. South to the rupture area of the 2011 Tohoku earthquake along the Japan trench, we consider possible M8 earthquake. The ground motions are computed with a four-step hybrid technique. We first calculate low-frequency ground motions at the engineering basement. We then calculate higher-frequency ground motions at the same position, and combine the lower- and higher-frequency motions using a matched filter. We finally calculate ground motions at the surface by computing the response of the alluvium-diluvium layers to the combined motions at the engineering basement.

  15. Java Test Driver Generation from Object-Oriented Interaction Traces

    NARCIS (Netherlands)

    M.M. Bonsangue (Marcello); F.S. de Boer (Frank); A. Gruener; M. Steffen

    2009-01-01

    htmlabstractIn the context of test-driven development for object-oriented programs, mock objects are increasingly used for unit testing. Several Java mock object frameworks exist, which all have in common that mock objects, realizing the test environment, are directly specied at the Java program

  16. High-performance file I/O in Java : existing approaches and bulk I/O extensions.

    Energy Technology Data Exchange (ETDEWEB)

    Bonachea, D.; Dickens, P.; Thakur, R.; Mathematics and Computer Science; Univ. of California at Berkeley; Illinois Institute of Technology

    2001-07-01

    There is a growing interest in using Java as the language for developing high-performance computing applications. To be successful in the high-performance computing domain, however, Java must not only be able to provide high computational performance, but also high-performance I/O. In this paper, we first examine several approaches that attempt to provide high-performance I/O in Java - many of which are not obvious at first glance - and evaluate their performance on two parallel machines, the IBM SP and the SGI Origin2000. We then propose extensions to the Java I/O library that address the deficiencies in the Java I/O API and improve performance dramatically. The extensions add bulk (array) I/O operations to Java, thereby removing much of the overhead currently associated with array I/O in Java. We have implemented the extensions in two ways: in a standard JVM using the Java Native Interface (JNI) and in a high-performance parallel dialect of Java called Titanium. We describe the two implementations and present performance results that demonstrate the benefits of the proposed extensions.

  17. Earthquake Prediction Research In Iceland, Applications For Hazard Assessments and Warnings

    Science.gov (United States)

    Stefansson, R.

    Earthquake prediction research in Iceland, applications for hazard assessments and warnings. The first multinational earthquake prediction research project in Iceland was the Eu- ropean Council encouraged SIL project of the Nordic countries, 1988-1995. The path selected for this research was to study the physics of crustal processes leading to earth- quakes. It was considered that small earthquakes, down to magnitude zero, were the most significant for this purpose, because of the detailed information which they pro- vide both in time and space. The test area for the project was the earthquake prone region of the South Iceland seismic zone (SISZ). The PRENLAB and PRENLAB-2 projects, 1996-2000 supported by the European Union were a direct continuation of the SIL project, but with a more multidisciplinary approach. PRENLAB stands for "Earthquake prediction research in a natural labo- ratory". The basic objective was to advance our understanding in general on where, when and how dangerous NH10earthquake motion might strike. Methods were devel- oped to study crustal processes and conditions, by microearthquake information, by continuous GPS, InSAR, theoretical modelling, fault mapping and paleoseismology. New algorithms were developed for short term warnings. A very useful short term warning was issued twice in the year 2000, one for a sudden start of an eruption in Volcano Hekla February 26, and the other 25 hours before a second (in a sequence of two) magnitude 6.6 (Ms) earthquake in the South Iceland seismic zone in June 21, with the correct location and approximate size. A formal short term warning, although not going to the public, was also issued before a magnitude 5 earthquake in November 1998. In the presentation it will be shortly described what these warnings were based on. A general hazard assessmnets was presented in scientific journals 10-15 years ago assessing within a few kilometers the location of the faults of the two 2000 earthquakes and suggesting

  18. Adding Wildcards to the Java Programming Language

    DEFF Research Database (Denmark)

    Torgersen, Mads; Hansen, Christian Plesner; Ernst, Erik

    2004-01-01

    , by using ‘?’ to denote unspecified type arguments. Thus they essentially unify the distinct families of classes that parametric polymorphism introduces. Wildcards are implemented as part of the addition of generics to the JavaTM programming language, and is thus deployed world-wide as part...... of the reference implementation of the Java compiler javac available from Sun Microsystems, Inc. By providing a richer type system, wildcards allow for an improved type inference scheme for polymorphic method calls. Moreover, by means of a novel notion of wildcard capture, polymorphic methods can be used to give...... symbolic names to unspecified types, in a manner similar to the “open� construct known from existential types. Wildcards show up in numerous places in the Java Platform APIs of the newest release, and some of the examples in this paper are taken from these APIs....

  19. Effects of the northern Ohio earthquake on the Perry nuclear power plant

    International Nuclear Information System (INIS)

    Stevenson, J.D.

    1987-01-01

    On January 31, 1986 at 11:47 A.M. EST, a brief strong motion duration and shallow (10 km focal depth) earthquake with a 5.0 Richter magnitude occurred. Its epicenter was located near Leroy, Ohio which is south of Lake Erie, at a distance of approximately ten (10) miles from the Perry Nuclear Power Plant site at Perry, Ohio. The potential safety significance of the Leroy 1986 earthquake is that it produced a recorded component of earthquake motion zero period acceleration approximately equal to the 0.15g zero period ground acceleration defined as the Safe Shutdown Earthquake for the site. The Leroy 1986 earthquake is the first recorded instance in the U.S. of a nuclear power plant being subjected to some level of OBE exceedance. In general, the short duration and high frequency non-damaging character of the Leroy 1986 earthquake cannot be equated directly on the basis of peak ground acceleration alone with the longer duration, lower frequency content of earthquakes which are expected to do structural damage. However, all the available evidence suggests that the Leroy 1986 is not atypical of what might be expected earthquake activity in the area of the eastern U.S. with 1-10 year return periods. On this basis, it is essential that new methods be developed which properly characterized the damage potential of these types of earthquakes and not simply process the raw data associated with recorded peak acceleration as the basis of nuclear plant shutdown and potentially lengthly examination

  20. Earthquake prediction

    International Nuclear Information System (INIS)

    Ward, P.L.

    1978-01-01

    The state of the art of earthquake prediction is summarized, the possible responses to such prediction are examined, and some needs in the present prediction program and in research related to use of this new technology are reviewed. Three basic aspects of earthquake prediction are discussed: location of the areas where large earthquakes are most likely to occur, observation within these areas of measurable changes (earthquake precursors) and determination of the area and time over which the earthquake will occur, and development of models of the earthquake source in order to interpret the precursors reliably. 6 figures

  1. Real-world Bluetooth MANET Java Middleware

    DEFF Research Database (Denmark)

    Glenstrup, Arne John; Nielsen, Michael; Skytte, Frederik

    We present BEDnet, a Java based middleware for creating and maintaining a Bluetooth based mobile ad-hoc network (MANET). MANETs are key to nomadic computing: Mobile units can set up spontaneous local networks when needed, removing the need for fixed network infrastructure, either as wireless access....... Based on the Java JSR-82 specification, BEDnet is portable to a wide selection of mobile phones, and is publicly available as open source software. Experiments show that e.g. media streaming over Bluetooth is feasible, and that BEDnet is able to set up a scatternet within a couple of minutes...

  2. Scientific Programming Using Java: A Remote Sensing Example

    Science.gov (United States)

    Prados, Don; Mohamed, Mohamed A.; Johnson, Michael; Cao, Changyong; Gasser, Jerry

    1999-01-01

    This paper presents results of a project to port remote sensing code from the C programming language to Java. The advantages and disadvantages of using Java versus C as a scientific programming language in remote sensing applications are discussed. Remote sensing applications deal with voluminous data that require effective memory management, such as buffering operations, when processed. Some of these applications also implement complex computational algorithms, such as Fast Fourier Transformation analysis, that are very performance intensive. Factors considered include performance, precision, complexity, rapidity of development, ease of code reuse, ease of maintenance, memory management, and platform independence. Performance of radiometric calibration code written in Java for the graphical user interface and of using C for the domain model are also presented.

  3. Spatial Analysis of Macro Economic in Central Java (PDRB Analysis in Year 1993-2003

    Directory of Open Access Journals (Sweden)

    Eddy Kiswanto

    2016-12-01

    Full Text Available This paper aims to study the spatial analysis macroeconomics condition in central Java from 1993-2001 base on PDRB analysis. Central Java stands in the last position in the economic in Central Java based on PDRB variable and economic growth is in the lowest category in the comparation with another provinces in Java. This is reason why Central Java is categorized as "LL" (Low low. One of the prime sectors in Central Java is small medium scale enterprises which is dominated 30% of national market, but since the economic crisis stroke in 1997 the manufacture sector, especially industry and processing had collapse. In 1996-1997, the level of manufacture growth increased to 14.4% but then decreased until minus 19.3%. This condition caused by bankruptcy to many of the industries. The poverty profile in Central Java from 1999-2003 is average 23.3% from the total population every years. Central Java stepping to number 2 in level of poverty absolute number 1. In poverty relativity level, Central Java became number 1 in Java from 2002-2003 with the level of poverty reached above the national average. This fact shows the unsuccessfully effort in reducing the poverty level.

  4. Cyclic executive for safety-critical Java on chip-multiprocessors

    DEFF Research Database (Denmark)

    Ravn, Anders P.; Schoeberl, Martin

    2010-01-01

    , that uses model checking to find a static schedule, if one exists at all, which gives an implementation of a table driven multiprocessor scheduler. To evaluate the proposed cyclic executive for multiprocessors we have implemented it in the context of safety-critical Java on a Java processor....

  5. Porting a Java-based Brain Simulation Software to C++

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    A currently available software solution to simulate neural development is Cx3D. However, this software is Java-based, and not ideal for high performance computing. This talk presents our step-by-step porting approach, that uses SWIG as a tool to interface C++ code from Java.

  6. Integrated Java Bytecode Verification

    DEFF Research Database (Denmark)

    Gal, Andreas; Probst, Christian; Franz, Michael

    2005-01-01

    Existing Java verifiers perform an iterative data-flow analysis to discover the unambiguous type of values stored on the stack or in registers. Our novel verification algorithm uses abstract interpretation to obtain definition/use information for each register and stack location in the program...

  7. When and Why Java was Deliberated from the Slavery?

    Directory of Open Access Journals (Sweden)

    Djoko Marihandono

    2017-07-01

    From the French point of view, Java would be set as centre of the French strategy in the effort to reoccupy India as before. According to Napoleon Bonaparte, India had natural resources more than the riches of all European kingdoms. So, the position of Java island geographically was very important because of his location was directly in front of India Ocean, and the military troupes could directly attack India.  Java which was very rich of the natural resources as wood as the basic materials of ship industry, potassium nitrate, as the materials of ammunition and the Javanese who had the very special endurance were considered by the Emperor as a very ideal island. The Javanese could compete the Sepoy soldiers, the Indian indigenous soldiers formed by the British. So, Napoleon Bonaparte considered that the Javanese would be prepared to realize the Napoleonic strategy. Java had to be saved from the British attack.

  8. Carving out turf in a biodiversity hotspot: multiple, previously unrecognized shrew species co-occur on Java Island, Indonesia.

    Science.gov (United States)

    Esselstyn, Jacob A; Maharadatunkamsi; Achmadi, Anang S; Siler, Cameron D; Evans, Ben J

    2013-10-01

    In theory, competition among species in a shared habitat results in niche separation. In the case of small recondite mammals such as shrews, little is known about their autecologies, leaving open questions regarding the degree to which closely related species co-occur and how or whether ecological niches are partitioned. The extent to which species are able to coexist may depend on the degree to which they exploit different features of their habitat, which may in turn influence our ability to recognize them as species. We explored these issues in a biodiversity hotspot, by surveying shrew (genus Crocidura) diversity on the Indonesian island of Java. We sequenced portions of nine unlinked genes in 100-117 specimens of Javan shrews and incorporated homologous data from most known Crocidura species from other parts of island South-East Asia. Current taxonomy recognizes four Crocidura species on Java, including two endemics. However, our phylogenetic, population genetic and species delimitation analyses identify five species on the island, and all are endemic to Java. While the individual ranges of these species may not overlap in their entirety, we found up to four species living syntopically and all five species co-occurring on one mountain. Differences in species' body size, use of above ground-level habitats by one species and habitat partitioning along ecological gradients may have facilitated species diversification and coexistence. © 2013 John Wiley & Sons Ltd.

  9. Infrastructure for Rapid Development of Java GUI Programs

    Science.gov (United States)

    Jones, Jeremy; Hostetter, Carl F.; Wheeler, Philip

    2006-01-01

    The Java Application Shell (JAS) is a software framework that accelerates the development of Java graphical-user-interface (GUI) application programs by enabling the reuse of common, proven GUI elements, as distinguished from writing custom code for GUI elements. JAS is a software infrastructure upon which Java interactive application programs and graphical user interfaces (GUIs) for those programs can be built as sets of plug-ins. JAS provides an application- programming interface that is extensible by application-specific plugins that describe and encapsulate both specifications of a GUI and application-specific functionality tied to the specified GUI elements. The desired GUI elements are specified in Extensible Markup Language (XML) descriptions instead of in compiled code. JAS reads and interprets these descriptions, then creates and configures a corresponding GUI from a standard set of generic, reusable GUI elements. These elements are then attached (again, according to the XML descriptions) to application-specific compiled code and scripts. An application program constructed by use of JAS as its core can be extended by writing new plug-ins and replacing existing plug-ins. Thus, JAS solves many problems that Java programmers generally solve anew for each project, thereby reducing development and testing time.

  10. 1881 and 1949 earthquakes at the Chios-Cesme Strait (Aegean Sea and their relation to tsunamis

    Directory of Open Access Journals (Sweden)

    Y. Altinok

    2005-01-01

    Full Text Available The most earthquake-prone areas in the eastern central Aegean Sea are the Izmir Bay, the Karaburun peninsula and the island of Chios. The level of seismic activity and tsunami potential are influenced by the presence of normal faults around the region. There have been about 20 moderate-size earthquakes from 496 BC to 1949 AD. Among these earthquakes, the ones on the dates 20 March 1389, 13 November 1856, 19/22 January 1866, 3 April 1881 and 23 July 1949 produced tsunamis. The Chios-Cesme earthquake (1881, Mw 6.5 took place in the South of the Cesme strait while the Chios-Karaburun earthquake (1949, Mw 6.7 occurred in the North. The tsunamis caused by the earthquakes affected the coasts of Chios Island and Cesme. These waves are thought to be associated with the earthquakes and co-seismic underwater failures possibly occurred along the coasts of the Chios Island and Karaburun Peninsula or on the complex subaqueous morphology between these lands. Some sea waves or oscillations observed following the aftershocks are believed to be related to other natural phenomena; e.g. the seiches occurred mainly in open-narrow bays as triggered by the earthquakes.

  11. Fault plane orientations of deep earthquakes in the Izu-Bonin-Marianas subduction zone system

    Science.gov (United States)

    Myhill, R.; Warren, L. M.

    2011-12-01

    We present the results of directivity analysis on 45 deep earthquakes within the Izu-Bonin-Marianas subduction zone between 1993 and 2011. The age of the subducting Pacific plate increases from north to south along the trench, from 120 Ma offshore Tokyo to over 150 Ma east of the Mariana Islands. The dip of the deep slab generally increases from north to south, and is steep to overturned beneath the southern Bonin Islands and Marianas. Between 34 and 26 degrees north, a peak in seismicity at 350-450 km depth marks a decrease in dip as the slab approaches the base of the upper mantle. We observe directivity for around 60 percent of the analysed earthquakes, and use the propagation characteristics to find the best fitting rupture vector. In 60-70 percent of cases with well constrained rupture directivity, the best fitting rupture vector allows discrimination of the fault plane and the auxiliary plane of the focal mechanism. The identified fault planes between 100 km and 500 km are predominantly near-horizontal or south-southwest dipping. Rotated into the plane of the slab, the fault plane poles form a single cluster, since the more steeply dipping fault planes are found within more steeply dipping sections of slab. The dominance of near-horizontal fault planes at intermediate depth agrees with results from previous studies of the Tonga and Middle-America subduction zones. However, the presence of a single preferred fault plane orientation for large deep-focus earthquakes has not been previously reported, and contrasts with the situation for deep-focus earthquakes in the Tonga-Kermadec subduction system. Ruptures tend to propagate away from the top surface of the slab. We discuss potential causes of preferred fault plane orientations within subducting slabs in the light of existing available data, and the implications for mechanisms of faulting at great depths within the Earth.

  12. Sequence alignment visualization in HTML5 without Java.

    Science.gov (United States)

    Gille, Christoph; Birgit, Weyand; Gille, Andreas

    2014-01-01

    Java has been extensively used for the visualization of biological data in the web. However, the Java runtime environment is an additional layer of software with an own set of technical problems and security risks. HTML in its new version 5 provides features that for some tasks may render Java unnecessary. Alignment-To-HTML is the first HTML-based interactive visualization for annotated multiple sequence alignments. The server side script interpreter can perform all tasks like (i) sequence retrieval, (ii) alignment computation, (iii) rendering, (iv) identification of a homologous structural models and (v) communication with BioDAS-servers. The rendered alignment can be included in web pages and is displayed in all browsers on all platforms including touch screen tablets. The functionality of the user interface is similar to legacy Java applets and includes color schemes, highlighting of conserved and variable alignment positions, row reordering by drag and drop, interlinked 3D visualization and sequence groups. Novel features are (i) support for multiple overlapping residue annotations, such as chemical modifications, single nucleotide polymorphisms and mutations, (ii) mechanisms to quickly hide residue annotations, (iii) export to MS-Word and (iv) sequence icons. Alignment-To-HTML, the first interactive alignment visualization that runs in web browsers without additional software, confirms that to some extend HTML5 is already sufficient to display complex biological data. The low speed at which programs are executed in browsers is still the main obstacle. Nevertheless, we envision an increased use of HTML and JavaScript for interactive biological software. Under GPL at: http://www.bioinformatics.org/strap/toHTML/.

  13. JESS: Java extensible snakes system

    Science.gov (United States)

    McInerney, Tim; Akhavan Sharif, M. Reza; Pashotanizadeh, Nasrin

    2005-04-01

    Snakes (Active Contour Models) are powerful model-based image segmentation tools. Although researchers have proven them especially useful in medical image analysis over the past decade, Snakes have remained primarily in the academic world and they have not become widely used in clinical practice or widely available in commercial packages. A number of confusing and specialized variants exist and there has been no standard open-source implementation available. To address this problem, we present a Java Extensible Snakes System (JESS) that is general, portable, and extensible. The system uses Java Swing classes to allow for the rapid development of custom graphical user interfaces (GUI's). It also incorporates the Java Advanced Imaging(JAI) class library, which provide custom image preprocessing, image display and general image I/O. The Snakes algorithm itself is written in a hierarchical fashion, consisting of a general Snake class and several subclasses that span the main variants of Snakes including a new, powerful, robust subdivision-curve Snake. These subclasses can be easily and quickly extended and customized for any specific segmentation and analysis task. We demonstrate the utility of these classes for segmenting various anatomical structures from 2D medical images. We also demonstrate the effectiveness of JESS by using it to rapidly build a prototype semi-automatic sperm analysis system. The JESS software will be made publicly available in early 2005.

  14. The feature of the focal mechanism solutions and tectonic stress field around the focus of Zaduo earthquake (Ms 6.3) in eastern Tibet

    Science.gov (United States)

    Yang, Y.; Zeng, Z.; Shuang, X.; Li, X.

    2017-12-01

    On 17th October, 2016, an earthquake of Ms6.3 occurred in Zaduo County, Qinghai Province (32.9°N, 95.0°E), 159 km away from the epicenter of Yushu Ms7.3 earthquake in 2011. The earthquake is located in the eastern Tibet Plateau and the north region of Eastern Himalayan Syntaxis. Using the broadband seismic waveform data form regional networks, we determined the focal mechanism solutions (FMSs) of 83 earthquakes (M>3.5) occurred in Zaduo and its adjacent areas from 2009 to 2017. We also collected another 63 published FMSs and then inversed the current tectonic stress field in study region using the damped linear inversion method. The results show that the Zaduo earthquake is a normal oblique earthquake. The FMSs in our study region are mainly in strike-slip and normal fault patterns. The strike-slip earthquakes are mainly distributed in Yushu-Ganzi, Zaduo and Yanshiping fault zones, and the normal faulting events occurred in Nu Jiang fault zone and Nierong County and its vicinity, the south and southwest of the study areas. The tectonic stress field results indicate that the stress distribution in the north and east of the study region changes homogeneously and slowly. From west to east, the σ1 gradually changes from NNE to NE direction, and the σ3 varies from NWW to NW direction. Both the maximum (σ1) and minimum (σ3) principal stress axes in the study area are nearly horizontal, except in the Nu Jiang fault zone and its vicinity, the south of the study area, which is in a normal faulting stress regime (σ1 is vertical and σ3 is horizontal). The localized normal faulting stress field in the south area, which is almost limited in a semicircle, indicates that a high pressure and low viscosity body with low S-wave velocity and high conductivity might exists beneath the anomaly area. And there may be another semicircle abnormal area beyond the south of the study region. Waveform data for this study are provided by Data Management Centre of China National Seismic

  15. ejIP: A TCP/IP Stack for Embedded Java

    DEFF Research Database (Denmark)

    Schoeberl, Martin

    2011-01-01

    present the design and implementation of a network stack written entirely in Java. This implementation serves as an example how to implement system functions in a safe language and gives evidence that Java can be used for operating system related functionality. The described TCP/IP stack ejIP has already...

  16. Can mine tremors be predicted? Observational studies of earthquake nucleation, triggering and rupture in South African mines

    CSIR Research Space (South Africa)

    Durrheim, RJ

    2012-05-01

    Full Text Available Earthquakes, and the tsunamis and landslides they trigger, pose a serious risk to people living close to plate boundaries, and a lesser but still significant risk to inhabitants of stable continental regions where destructive earthquakes are rare... of experiments that seek to identify reliable precursors of damaging seismic events. 1. Introduction Earthquakes, and the tsunamis and landslides they trigger, pose a serious risk to people living close to plate boundaries, and a lesser but still significant...

  17. Functional Programming for Java Developers Tools for Better Concurrency, Abstraction, and Agility

    CERN Document Server

    Wampler, Dean

    2011-01-01

    Software development today is embracing functional programming (FP), whether it's for writing concurrent programs or for managing Big Data. Where does that leave Java developers? This concise book offers a pragmatic, approachable introduction to FP for Java developers or anyone who uses an object-oriented language. Dean Wampler, Java expert and author of Programming Scala (O'Reilly), shows you how to apply FP principles such as immutability, avoidance of side-effects, and higher-order functions to your Java code. Each chapter provides exercises to help you practice what you've learned. Once

  18. Experiments with the Sun Java Real-Time System -- Part 2

    National Research Council Canada - National Science Library

    Auguston, Mikhail; Cook, Thomas S; Drusinsky, Doron; Michael, James B; Otani, Thomas W; Shing, Man-Tak

    2007-01-01

    In the authors' first report on the Sun Java Real-Time System (RTS), they concluded that it is preferable to use real-time Java threads that use heap memory rather than no-heap real-time threads (NHRTTs...

  19. Component-Based Java Legacy Code Refactoring

    Directory of Open Access Journals (Sweden)

    Hugo Arboleda

    2013-01-01

    Full Text Available La Ingeniería de Software Basada en Componentes (CBSE pretende mejorar la modularización del software y la inserción de preocupaciones arquitecturales. Refactorizar código Java legado con CBSE en mente requiere evaluar primero el cumplimiento del código legado con los principios de la programación por componentes. En este artículo presentamos un portafolio de reglas para evaluar el cumplimiento de la propiedad de Integridad de Comunicación en código Java legado; esta propiedad es una de las mayores fortalezas del enfoque CBSE. Proponemos estas reglas para identificar tipos componente y así proveer una medida de la construcción de componentes CBSE de una aplicación. Con el objetivo de ayudar a los desarrolladores y al personal responsable del mantenimiento de código legado cuando se hace necesario refactorizar sus aplicaciones, nuestro trabajo nos lleva a definir un conjunto de acciones de refactorización. En este artículo también presentamos resultados de pruebas, comparaciones y análisis de las salidas logradas luego de refactorizar varias aplicaciones Java.

  20. Study of the structure changes caused by earthquakes in Chile applying the lineament analysis to the Aster (Terra) satellite data.

    Science.gov (United States)

    Arellano-Baeza, A.; Zverev, A.; Malinnikov, V.

    Chile is one of the most seismically and volcanically active regions in the South America due to a constant subdiction of the South American plate, converging with the Nazca plate in the extreme North of Chile. Four events, namely: the Ovalle earthquake of Juny 18, 2003, M=6.3, with epicenter localized at (-30:49:33, -71:18:53), the Calama earthquake of Junly 19, 2001, M=5.2, (-30:29:38,-68:33:18), the Pica earthquake of April 10, 2003, M=5.1, (-21:03:20,-68:47:10) and the La Ligua earthquake of May 6, 2001, M=5.1, (-32:35:31,-71:07:58:) were analysed using the 15 m resolution satellite images, provided by the ASTER/VNIR instrument. The Lineament Extraction and Stripes Statistic Analysis (LESSA) software package was used to examine changes in the lineament features caused by sismic activity. Lack of vegetation facilitates the study of the changes in the topography common to all events and makes it possible to evaluate the sismic risk in this region for the future.

  1. Seismic hazard in Hawaii: High rate of large earthquakes and probabilistics ground-motion maps

    Science.gov (United States)

    Klein, F.W.; Frankel, A.D.; Mueller, C.S.; Wesson, R.L.; Okubo, P.G.

    2001-01-01

    The seismic hazard and earthquake occurrence rates in Hawaii are locally as high as that near the most hazardous faults elsewhere in the United States. We have generated maps of peak ground acceleration (PGA) and spectral acceleration (SA) (at 0.2, 0.3 and 1.0 sec, 5% critical damping) at 2% and 10% exceedance probabilities in 50 years. The highest hazard is on the south side of Hawaii Island, as indicated by the MI 7.0, MS 7.2, and MI 7.9 earthquakes, which occurred there since 1868. Probabilistic values of horizontal PGA (2% in 50 years) on Hawaii's south coast exceed 1.75g. Because some large earthquake aftershock zones and the geometry of flank blocks slipping on subhorizontal decollement faults are known, we use a combination of spatially uniform sources in active flank blocks and smoothed seismicity in other areas to model seismicity. Rates of earthquakes are derived from magnitude distributions of the modem (1959-1997) catalog of the Hawaiian Volcano Observatory's seismic network supplemented by the historic (1868-1959) catalog. Modern magnitudes are ML measured on a Wood-Anderson seismograph or MS. Historic magnitudes may add ML measured on a Milne-Shaw or Bosch-Omori seismograph or MI derived from calibrated areas of MM intensities. Active flank areas, which by far account for the highest hazard, are characterized by distributions with b slopes of about 1.0 below M 5.0 and about 0.6 above M 5.0. The kinked distribution means that large earthquake rates would be grossly under-estimated by extrapolating small earthquake rates, and that longer catalogs are essential for estimating or verifying the rates of large earthquakes. Flank earthquakes thus follow a semicharacteristic model, which is a combination of background seismicity and an excess number of large earthquakes. Flank earthquakes are geometrically confined to rupture zones on the volcano flanks by barriers such as rift zones and the seaward edge of the volcano, which may be expressed by a magnitude

  2. The 1964 Great Alaska Earthquake and tsunamis: a modern perspective and enduring legacies

    Science.gov (United States)

    Brocher, Thomas M.; Filson, John R.; Fuis, Gary S.; Haeussler, Peter J.; Holzer, Thomas L.; Plafker, George; Blair, J. Luke

    2014-01-01

    The magnitude 9.2 Great Alaska Earthquake that struck south-central Alaska at 5:36 p.m. on Friday, March 27, 1964, is the largest recorded earthquake in U.S. history and the second-largest earthquake recorded with modern instruments. The earthquake was felt throughout most of mainland Alaska, as far west as Dutch Harbor in the Aleutian Islands some 480 miles away, and at Seattle, Washington, more than 1,200 miles to the southeast of the fault rupture, where the Space Needle swayed perceptibly. The earthquake caused rivers, lakes, and other waterways to slosh as far away as the coasts of Texas and Louisiana. Water-level recorders in 47 states—the entire Nation except for Connecticut, Delaware, and Rhode Island— registered the earthquake. It was so large that it caused the entire Earth to ring like a bell: vibrations that were among the first of their kind ever recorded by modern instruments. The Great Alaska Earthquake spawned thousands of lesser aftershocks and hundreds of damaging landslides, submarine slumps, and other ground failures. Alaska’s largest city, Anchorage, located west of the fault rupture, sustained heavy property damage. Tsunamis produced by the earthquake resulted in deaths and damage as far away as Oregon and California. Altogether the earthquake and subsequent tsunamis caused 129 fatalities and an estimated $2.3 billion in property losses (in 2013 dollars). Most of the population of Alaska and its major transportation routes, ports, and infrastructure lie near the eastern segment of the Aleutian Trench that ruptured in the 1964 earthquake. Although the Great Alaska Earthquake was tragic because of the loss of life and property, it provided a wealth of data about subductionzone earthquakes and the hazards they pose. The leap in scientific understanding that followed the 1964 earthquake has led to major breakthroughs in earth science research worldwide over the past half century. This fact sheet commemorates Great Alaska Earthquake and

  3. Modelling a Java Ring based implementation of an N-Count payment system

    NARCIS (Netherlands)

    Revill, J.D.; Hartel, Pieter H.

    N-Count is a system for offline value transfer. A prototype of an N-Count payment system has been designed, and it has been implemented in Java. We have used the Java Ring with the Java Card API as a secure device. The system has also been modelled using the Spin model checker. The combined

  4. Initial report on drilling into seismogenic zones of M2.0 - M5.5 earthquakes from deep South African gold mines (DSeis)

    Science.gov (United States)

    Ogasawara, Hiroshi; Durrheim, Raymond; Yabe, Yasuo; Ito, Takatoshi; van Aswegen, Gerrie; Grobbelaar, Michelle; Funato, Akio; Ishida, Akimasa; Ogasawara, Hiroyuki; Mngadi, Siyanda; Manzi, Musa; Ziegler, Martin; Ward, Tony; Moyer, Pamela; Boettcher, Margaret; Ellsworth, Bill; Liebenberg, Bennie; Wechsler, Neta; Onstott, Tullis; Berset, Nicolas

    2017-04-01

    The International Continental Scientific Drilling Program (ICDP) approved our proposal (Ogasawara et al., EGU 2016) to drill into and around seismogenic zones where critically stressed faults initiated ruptures at depth. The drilling targets include four ruptures equivalent to M2.0, 2.8, 3.5, and 5.5 that dynamically and quasi-statically evolved in 2.9 Ga hard rock in the Witwatersrand basin, South Africa. Major advantages of our drilling locations are the large quantity and high-quality of existing data from dense seismic arrays both on surface and near-field underground in three deep South African gold mines. Additionally, the great depths (1.0 to 3.3 km from surface) to collar holes reduce drilling costs significantly and enable a larger number of holes to be drilled. Flexibility in drilling direction will also allow us to minimize damage in borehole or drilled cores. With the ICDP funds, we will conduct full-core drilling of 16 holes with drilling ranges from 50 to 750 m to recover both materials and fractures in and around the seismogenic zones, followed by core and borehole logging. Additional in-hole monitoring at close proximity will be supported by co-mingled funds and will follow the ICDP drilling. Expected magnitudes of maximum shear stress are several tens of MPa. We have established an overcoring procedure to measure 3D-stress state for adverse underground working conditions so as not to interfere with mining operations. This procedure was optimized based on the Compact Conic-ended Borehole Overcoring (CCBO) technique (ISRM suggested; Sugawara and Obara, 1999). Funato and Ito (2016 IJRMMS) developed a diametrical core deformation analysis (DCDA) method to measure differential stress using only drilled core by assuming diametrical change with roll angles caused by elastic in-axisymmetrical expansion during drilling. A gold mine has already drilled a hole to intersect the hypocenter of a 2016 M3.5 earthquake and carried out the CCBO stress measurement in

  5. The Chiloé Mw 7.6 earthquake of 2016 December 25 in Southern Chile and its relation to the Mw 9.5 1960 Valdivia earthquake

    Science.gov (United States)

    Lange, Dietrich; Ruiz, Javier; Carrasco, Sebastián; Manríquez, Paula

    2018-04-01

    On 2016 December 25, an Mw 7.6 earthquake broke a portion of the Southern Chilean subduction zone south of Chiloé Island, located in the central part of the Mw 9.5 1960 Valdivia earthquake. This region is characterized by repeated earthquakes in 1960 and historical times with very sparse interseismic activity due to the subduction of a young (˜15 Ma), and therefore hot, oceanic plate. We estimate the coseismic slip distribution based on a kinematic finite-fault source model, and through joint inversion of teleseismic body waves and strong motion data. The coseismic slip model yields a total seismic moment of 3.94 × 1020 N.m that occurred over ˜30 s, with the rupture propagating mainly downdip, reaching a peak slip of ˜4.2 m. Regional moment tensor inversion of stronger aftershocks reveals thrust type faulting at depths of the plate interface. The fore- and aftershock seismicity is mostly related to the subduction interface with sparse seismicity in the overriding crust. The 2016 Chiloé event broke a region with increased locking and most likely broke an asperity of the 1960 earthquake. The updip limit of the main event, aftershocks, foreshocks and interseismic activity are spatially similar, located ˜15 km offshore and parallel to Chiloé Islands west coast. The coseismic slip model of the 2016 Chiloé earthquake suggests a peak slip of 4.2 m that locally exceeds the 3.38 m slip deficit that has accumulated since 1960. Therefore, the 2016 Chiloé earthquake possibly released strain that has built up prior to the 1960 Valdivia earthquake.

  6. Fault parameters and macroseismic observations of the May 10, 1997 Ardekul-Ghaen earthquake

    Science.gov (United States)

    Amini, H.; Zare, M.; Ansari, A.

    2018-01-01

    The Ardekul (Zirkuh) earthquake (May 10, 1997) is the largest recent earthquake that occurred in the Ardekul-Ghaen region of Eastern Iran. The greatest destruction was concentrated around Ardekul, Haji-Abad, Esfargh, Pishbar, Bashiran, Abiz-Qadim, and Fakhr-Abad (completely destroyed). The total surface fault rupture was about 125 km with the longest un-interrupted segment in the south of the region. The maximum horizontal and vertical displacements were reported in Korizan and Bohn-Abad with about 210 and 70 cm, respectively; moreover, other building damages and environmental effects were also reported for this earthquake. In this study, the intensity value XI on the European Macroseismic Scale (EMS) and Environmental Seismic Intensity (ESI) scale was selected for this earthquake according to the maximum effects on macroseismic data points affected by this earthquake. Then, according to its macroseismic data points of this earthquake and Boxer code, some macroseismic parameters including magnitude, location, source dimension, and orientation of this earthquake were also estimated at 7.3, 33.52° N-59.99° E, 75 km long and 21 km wide, and 152°, respectively. As the estimated macroseismic parameters are consistent with the instrumental ones (Global Centroid Moment Tensor (GCMT) location and magnitude equal 33.58° N-60.02° E, and 7.2, respectively), this method and dataset are suggested not only for other instrumental earthquakes, but also for historical events.

  7. Earthquake Source Parameters Inferred from T-Wave Observations

    Science.gov (United States)

    Perrot, J.; Dziak, R.; Lau, T. A.; Matsumoto, H.; Goslin, J.

    2004-12-01

    The seismicity of the North Atlantic Ocean has been recorded by two networks of autonomous hydrophones moored within the SOFAR channel on the flanks of the Mid-Atlantic Ridge (MAR). In February 1999, a consortium of U.S. investigators (NSF and NOAA) deployed a 6-element hydrophone array for long-term monitoring of MAR seismicity between 15o-35oN south of the Azores. In May 2002, an international collaboration of French, Portuguese, and U.S. researchers deployed a 6-element hydrophone array north of the Azores Plateau from 40o-50oN. The northern network (referred to as SIRENA) was recovered in September 2003. The low attenuation properties of the SOFAR channel for earthquake T-wave propagation results in a detection threshold reduction from a magnitude completeness level (Mc) of ˜ 4.7 for MAR events recorded by the land-based seismic networks to Mc=3.0 using hydrophone arrays. Detailed focal depth and mechanism information, however, remain elusive due to the complexities of seismo-acoustic propagation paths. Nonetheless, recent analyses (Dziak, 2001; Park and Odom, 2001) indicate fault parameter information is contained within the T-wave signal packet. We investigate this relationship further by comparing an earthquake's T-wave duration and acoustic energy to seismic magnitude (NEIC) and radiation pattern (for events M>5) from the Harvard moment-tensor catalog. First results show earthquake energy is well represented by the acoustic energy of the T-waves, however T-wave codas are significantly influenced by acoustic propagation effects and do not allow a direct determination of the seismic magnitude of the earthquakes. Second, there appears to be a correlation between T-wave acoustic energy, azimuth from earthquake source to the hydrophone, and the radiation pattern of the earthquake's SH waves. These preliminary results indicate there is a relationship between the T-wave observations and earthquake source parameters, allowing for additional insights into T

  8. Preliminary results of teleseismic double-difference relocation of earthquakes around Indonesian archipelago region

    Energy Technology Data Exchange (ETDEWEB)

    Nugraha, Andri Dian, E-mail: andridn104@gmail.com; Widiyantoro, Sri [Global Geophysical Research Group, Faculty of Mining and Petroleum Engineering, Institut Teknologi Bandung (Indonesia); Shiddiqi, Hasbi Ash [Earth Sciences Graduate Program, Faculty of Earth Sciences and Technology, Institut Teknologi Bandung (Indonesia); Ramdhan, Mohamad; Wandono,; Sutiyono,; Handayani, Titi; Nugroho, Hendro [Agency for Meteorology, Climatology, and Geophysics (BMKG), Jakarta (Indonesia)

    2015-04-24

    Indonesian archipelago region is located in active tectonic setting and high seismicity zone. During the last decade, Indonesian was experienced with destructive major earthquakes causing damage and victims. The information of precise earthquake location parameters are very important in partular for earthquake early warning to the society and for advance seismic studies. In this study, we attempted to improve hypocenter location compiled by BMKG for time periods of April, 2009 up to June, 2014 for about 22,000 earthquake events around Indonesian region. For the firts time, we applied teleseismic double-difference relocation algorithm (teletomoDD) to improve hypocenter region in Indonesia region combining regional and teleseismic stations. Hypocenter relocation was performed utilizing local, regional, and teleseismic P-wave arrival time data. Our relocation result show that travel-time RMS errors were greatly reduced compared to the BMKG catalog. Seismicity at shallower depth (less than 50 km) shows significantly improvement especially in depth, and refined shallow geological structures, e.g. trench and major strike slip faults. Clustered seismicity is also detected beneath volcanic region, and probably related volcano activities and also major faults nearby. In the Sunda arc region, seismicity at shallower depth centered at two major distributions parallel to the trench strike direction, i.e. around fore-arc and in mainland that related to major fault, e.g. the Sumatran fault, and volcanic fronts. Below Central Java region, relocated hypocenter result showed double seismic zone pattern. A seismic gap is detected around the Sunda-Banda transition zone where transition between oceanic subduction to continental crust collision of Australian plate occurs. In Eastern Indonesia region, shallow earthquakes are observed related to major strike slip faults, e.g. Sorong and Palu-Koro fault, volcanism, and shallow part of subduction and collision zones. We also compare our

  9. JavaScript: Convenient Interactivity for the Class Web Page.

    Science.gov (United States)

    Gray, Patricia

    This paper shows how JavaScript can be used within HTML pages to add interactive review sessions and quizzes incorporating graphics and sound files. JavaScript has the advantage of providing basic interactive functions without the use of separate software applications and players. Because it can be part of a standard HTML page, it is…

  10. The Organisation and Rationalisation of Java Based Applications in the BDI Group

    CERN Document Server

    Jackson, S; CERN. Geneva. AB Department

    2005-01-01

    The AB/BDI software section is responsible for providing all the software necessary to develop, test, diagnose and maintain the different instruments produced by the group. Almost all graphical user interface applications produced by the group are written in Java and the Java Web Start architecture is used to launch these applications. Java Web Start provides a solid basis for application deployment, but lacks several key features essential for ensuring a proper and easily manageable working environment. This note describes an internally developed tool, which extends the Java Web Start functionality in order to provide these missing features.

  11. Remodularizing Java programs for comprehension of features

    DEFF Research Database (Denmark)

    Olszak, Andrzej; Jørgensen, Bo Nørregaard

    2009-01-01

    . In absence of these mechanisms, feature implementations tend to be scattered and tangled in terms of object-oriented abstractions, making the code implementing features difficult to locate and comprehend. In this paper we present a semi-automatic method for feature-oriented remodularization of Java programs....... Our method uses execution traces to locate implementations of features, and Java packages to establish explicit feature modules. To evaluate usefulness of the approach, we present a case study where we apply our method to two real-world software systems. The obtained results indicate a significant...

  12. Beginning Java programming the object-oriented approach

    CERN Document Server

    Baesens, Bart; vanden Broucke, Seppe

    2015-01-01

    A comprehensive Java guide, with samples, exercises, case studies, and step-by-step instruction Beginning Java Programming: The Object Oriented Approach is a straightforward resource for getting started with one of the world's most enduringly popular programming languages. Based on classes taught by the authors, the book starts with the basics and gradually builds into more advanced concepts. The approach utilizes an integrated development environment that allows readers to immediately apply what they learn, and includes step-by-step instruction with plenty of sample programs. Each chapter c

  13. Modeling earthquake sequences along the Manila subduction zone: Effects of three-dimensional fault geometry

    Science.gov (United States)

    Yu, Hongyu; Liu, Yajing; Yang, Hongfeng; Ning, Jieyuan

    2018-05-01

    To assess the potential of catastrophic megathrust earthquakes (MW > 8) along the Manila Trench, the eastern boundary of the South China Sea, we incorporate a 3D non-planar fault geometry in the framework of rate-state friction to simulate earthquake rupture sequences along the fault segment between 15°N-19°N of northern Luzon. Our simulation results demonstrate that the first-order fault geometry heterogeneity, the transitional-segment (possibly related to the subducting Scarborough seamount chain) connecting the steeper south segment and the flatter north segment, controls earthquake rupture behaviors. The strong along-strike curvature at the transitional-segment typically leads to partial ruptures of MW 8.3 and MW 7.8 along the southern and northern segments respectively. The entire fault occasionally ruptures in MW 8.8 events when the cumulative stress in the transitional-segment is sufficiently high to overcome the geometrical inhibition. Fault shear stress evolution, represented by the S-ratio, is clearly modulated by the width of seismogenic zone (W). At a constant plate convergence rate, a larger W indicates on average lower interseismic stress loading rate and longer rupture recurrence period, and could slow down or sometimes stop ruptures that initiated from a narrower portion. Moreover, the modeled interseismic slip rate before whole-fault rupture events is comparable with the coupling state that was inferred from the interplate seismicity distribution, suggesting the Manila trench could potentially rupture in a M8+ earthquake.

  14. Error evaluation of inelastic response spectrum method for earthquake design

    International Nuclear Information System (INIS)

    Paz, M.; Wong, J.

    1981-01-01

    Two-story, four-story and ten-story shear building-type frames subjected to earthquake excitaion, were analyzed at several levels of their yield resistance. These frames were subjected at their base to the motion recorded for north-south component of the 1940 El Centro earthquake, and to an artificial earthquake which would produce the response spectral charts recommended for design. The frames were first subjected to 25% or 50% of the intensity level of these earthquakes. The resulting maximum relative displacement for each story of the frames was assumed to be yield resistance for the subsequent analyses at 100% of intensity for the excitation. The frames analyzed were uniform along their height with the stiffness adjusted as to result in 0.20 seconds of the fundamental period for the two-story frame, 0.40 seconds for the four-story frame and 1.0 seconds for the ten-story frame. Results of the study provided the following conclusions: (1) The percentage error in floor displacement for linear behavior was less than 10%; (2) The percentage error in floor displacement for inelastic behavior (elastoplastic) could be as high as 100%; (3) In most of the cases analyzed, the error increased with damping in the system; (4) As a general rule, the error increased as the modal yield resistance decreased; (5) The error was lower for the structures subjected to the 1940 E1 Centro earthquake than for the same structures subjected to an artificial earthquake which was generated from the response spectra for design. (orig./HP)

  15. Restoration in Java 1815-1830: A Review

    Directory of Open Access Journals (Sweden)

    Alicia Schrikker

    2015-12-01

    Full Text Available This essay reviews the historiographical trends and voids in William I’s restoration on Java. William I’s policy for Java was changeable and swung between liberal and conservative within fifteen years. It is argued that William I’s changeable policy can best be understood through the enlightened rhetoric of progress that was en vogue among all colonial ideologues at the time, rather than through the more traditional dichotomy of liberalism and conservatism. However, when one wants to understand to what extent restoration implied change in colonial experience historians will have to dig deeper. Ultimately though, the essay argues that it is regrettable that the literature on this crucial period of colonial rule in Java is still fragmented and is often written in isolation from debates on restoration in the Netherlands or colonial experiences elsewhere, and vice versa.Restauratie op Java 1815-1830. Een overzichtDit essay neemt de recente historiografie over de restauratie van de Nederlandse macht op Java onder Willem I in de periode 1815-1830 onder de loep. Historici hebben er moeite mee om het ogenschijnlijk grillige beleid, dat zich in deze jaren bewoog tussen liberale en conservatieve uitersten, te interpreteren. Ze laten zich nog te vaak verleiden tot een reproductie van de liberale en conservatieve tegenstellingen uit de tijd zelf. Dit essay beschouwt zowel de politiek-intellectuele bronnen van dit beleid, als de meer praktische kant van staatsvorming in deze periode. Het betoogt dat Willem I’s wisselvallige beleid eigenlijk het best begrepen kan worden vanuit de verlichte vooruitgangsidealen die voor koloniale ideologen binnen en buiten Nederland in de periode gemeengoed waren. Om de impact en dagelijkse praktijk van deze periode van restauratie werkelijk te begrijpen zullen historici echter dieper moeten graven. Dit essay biedt een aantal handreikingen in die richting, geïnspireerd op Brits-Indiase koloniale historiografie en

  16. Hardware Support for Safety-critical Java Scope Checks

    DEFF Research Database (Denmark)

    Rios Rivas, Juan Ricardo; Schoeberl, Martin

    2012-01-01

    Memory management in Safety-Critical Java (SCJ) is based on time bounded, non garbage collected scoped memory regions used to store temporary objects. Scoped memory regions may have different life times during the execution of a program and hence, to avoid leaving dangling pointers, it is necessary...... in terms of execution time for applications where cross-scope references are frequent. Our proposal was implemented and tested on the Java Optimized Processor (JOP)....

  17. Structure of the subducted Cocos Plate from locations of intermediate-depth earthquakes

    Science.gov (United States)

    Lomnitz, C.; Rodríguez-Padilla, L. D.; Castaños, H.

    2013-05-01

    Locations of 3,000 earthquakes of 40 to 300 km depth are used to define the 3-D structure of the subducted Cocos Plate under central and southern Mexico. Discrepancies between deep-seated lineaments and surface tectonics are described. Features of particular interest include: (1) a belt of moderate activity at 40 to 80 km depth that parallels the southern boundary of the Mexican Volcanic Plateau; (2) an offset of 150 km across the Isthmus of Tehuantepec where all seismic activity is displaced toward the northeast; (3) three nests of frequent, deep-seated events (80 to 300 km depth) under southern Veracruz, Chiapas and the coast of Mexico-Guatemala. The active subduction process is sharply delimited along a NW-SE lineament from the Yucatan Peninsula, of insignificant earthquake activity. The focal distribution of intermediate-depth earthquakes in south-central Mexico provides evidence of stepwise deepening of the subduction angle along the Trench, starting at 15 degrees under Michoacan-Guerrero to 45 degrees under NW Guatemala. Historical evidence suggests that the hazard to Mexico City from large intermediate-depth earthquakes may have been underestimated.

  18. Remarkable changes in behavior and physiology of laboratory mice after the massive 2011 Tohoku earthquake in Japan.

    Science.gov (United States)

    Yanai, Shuichi; Semba, Yuki; Endo, Shogo

    2012-01-01

    A devastating earthquake and tsunami hit Japan on March 11, 2011, followed by several long and intense aftershocks. Laboratory mice housed in the Tokyo, located approximately 330 km south of this earthquake's epicenter, displayed remarkable changes in a variety of behaviors and physiological measures. Although unusual pre-earthquake behaviors have been previously reported in laboratory animals, little is known about behavioral and physiological changes that occur after a great earthquake. In the present study, the effects of Tohoku earthquake on mice behavior were investigated. "Earthquake-experienced" mice displayed a marked increase in food consumption without gaining body weight in response to the earthquake. They also displayed enhanced anxiety, and in a formal fear memory task, showed significantly greater tone- and context-dependent conditioned freezing. Water maze performance of earthquake-experienced mice showed the quicker acquisition of the task, faster swim speed and longer swim distance than the naive mice. Serum corticosterone levels were elevated compared to the naive mice, indicating that the earthquake and aftershocks were stressful for the mice. These results demonstrate that great earthquakes strongly affect mouse behaviors and physiology. Although the effects of a variety of experimental manipulations on mouse behaviors in disease models or in models of higher cognitive functions have been extensively examined, researchers need to be aware how natural phenomena, such as earthquakes and perhaps other natural environmental factors, influence laboratory animal behaviors and physiology.

  19. SwingStates: Adding state machines to Java and the Swing toolkit

    OpenAIRE

    Appert , Caroline; Beaudouin-Lafon , Michel

    2008-01-01

    International audience; This article describes SwingStates, a Java toolkit designed to facilitate the development of graphical user interfaces and bring advanced interaction techniques to the Java platform. SwingStates is based on the use of finite-state machines specified directly in Java to describe the behavior of interactive systems. State machines can be used to redefine the behavior of existing Swing widgets or, in combination with a new canvas widget that features a rich graphical mode...

  20. Dose Rate of Environmental Gamma Radiation in Java Island

    International Nuclear Information System (INIS)

    Gatot Suhariyono; Buchori; Dadong Iskandar

    2007-01-01

    The dose rate Monitoring of environmental gamma radiation at some locations in Java Island in the year 2005 / 2006 has been carried out. The dose rate measurement of gamma radiation is carried out by using the peripheral of Portable Gamma of Ray Spectrometer with detector of NaI(Tl), Merck Exploranium, Model GR-130- MINISPEC, while to determine its geographic position is used by the GPS (Global Positioning System), made in German corporation of GPS III Plus type. The division of measurement region was conducted by dividing Java Island become 66 parts with same distance, except in Jepara area that will built PLTN (Nuclear Energy Power), distance between measurement points is more closed. The results of dose rate measurement are in 66 locations in Java Island the range of (19.24 ± 4.05) nSv/hour until (150.78 ± 12.26) nSv/hour with mean (51.93 ± 36.53) nSv/h. The lowest dose rate was in location of Garut, while highest dose rate was in Ujung Lemah Abang, Jepara location. The data can be used for base line data of dose rate of environmental gamma radiation in Indonesia, specially in Java Island. The mean level of gamma radiation in Java monitoring area (0.46 mSv / year) was still lower than worldwide average effective dose rate of terrestrial gamma rays 0.5 mSv / year (report of UNSCEAR, 2000). (author)

  1. A Framework for Automated Testing of JavaScript Web Applications

    DEFF Research Database (Denmark)

    Artzi, Shay; Dolby, Julian; Jensen, Simon Holm

    2011-01-01

    Current practice in testing JavaScript web applications requires manual construction of test cases, which is difficult and tedious. We present a framework for feedback-directed automated test generation for JavaScript in which execution is monitored to collect information that directs the test...

  2. Rupture complexity of the Mw 8.3 sea of okhotsk earthquake: Rapid triggering of complementary earthquakes?

    Science.gov (United States)

    Wei, Shengji; Helmberger, Don; Zhan, Zhongwen; Graves, Robert

    2013-01-01

    We derive a finite slip model for the 2013 Mw 8.3 Sea of Okhotsk Earthquake (Z = 610 km) by inverting calibrated teleseismic P waveforms. The inversion shows that the earthquake ruptured on a 10° dipping rectangular fault zone (140 km × 50 km) and evolved into a sequence of four large sub-events (E1–E4) with an average rupture speed of 4.0 km/s. The rupture process can be divided into two main stages. The first propagated south, rupturing sub-events E1, E2, and E4. The second stage (E3) originated near E2 with a delay of 12 s and ruptured northward, filling the slip gap between E1 and E2. This kinematic process produces an overall slip pattern similar to that observed in shallow swarms, except it occurs over a compressed time span of about 30 s and without many aftershocks, suggesting that sub-event triggering for deep events is significantly more efficient than for shallow events.

  3. The definitive guide to Jython Python for the Java platform

    CERN Document Server

    Juneau, Josh; Ng, Victor; Soto, Leo; Wierzbicki, Frank

    2010-01-01

    Jython is an open source implementation of the high-level, dynamic, object-oriented scripting language Python seamlessly integrated with the Java platform. The predecessor to Jython, JPython, is certified as 100% Pure Java. Jython is freely available for both commercial and noncommercial use and is distributed with source code. Jython is complementary to Java. The Definitive Guide to Jython, written by the official Jython team leads, covers the latest Jython 2.5 (or 2.5.x) from the basics to the advanced features. This book begins with a brief introduction to the language and then journeys thr

  4. Earthquake Culture: A Significant Element in Earthquake Disaster Risk Assessment and Earthquake Disaster Risk Management

    OpenAIRE

    Ibrion, Mihaela

    2018-01-01

    This book chapter brings to attention the dramatic impact of large earthquake disasters on local communities and society and highlights the necessity of building and enhancing the earthquake culture. Iran was considered as a research case study and fifteen large earthquake disasters in Iran were investigated and analyzed over more than a century-time period. It was found that the earthquake culture in Iran was and is still conditioned by many factors or parameters which are not integrated and...

  5. CSS-Driven Java Swing Component

    OpenAIRE

    Hvězda, Matěj

    2014-01-01

    Tato práce je zaměřená na vytvoření komponenty Java Swing, která zobrazí obsah HTML dokumentu na základě kaskádových stylů (CSS). Důvod k vytvoření takové komponenty je umožnění vývojářům tvořit uživatelské rozhraní pomocí CSS v Javě bez nutnosti toho, aby znali rozhraní Java Swing.   K syntaktickému rozboru HTML a CSS je použit zobrazovací stroj CSSBox , který umožní získat veškeré potřebné informace ke správnému zobrazení dokumentu. Komponenta je implementována pomocí komponent Swingu...

  6. The evaluation of damage mechanism of unreinforced masonry buildings after Van (2011) and Elazig (2010) Earthquakes

    International Nuclear Information System (INIS)

    Güney, D; Aydin, E; Öztürk, B

    2015-01-01

    On March 8 th , 2010 Karakocan-Elazig earthquake of magnitude 6.0 occurred at a region where masonry and adobe construction is very common. Karakocan-Elazig is located in a high seismicity region on Eastern Anatolian Fault System (EAFS). Due to the earthquake, 42 people were killed and 14’113 buildings were damaged. Another city, Van located at South east of Turkey is hit by earthquakes with M = 7.2 occurred on October 23 rd , 2011 at 13:41 (local time), whose epicenter was about 16 km north of Van (Tabanli village) and M = 5.6 on November 9 th , 2011 with an epicenter near the town of Edremit, south of Van and caused the loss of life and heavy damages. Both earthquakes killed 644 people and 2608 people were injured. Approximately 10’000 buildings were seriously damaged. There are many traditional types of structures existing in the region hit by earthquakes (both Van and Elazig). These buildings were built as adobe, unreinforced masonry or mixed type. These types of buildings are very common in rural areas (especially south and east) of Turkey because of easy workmanship and cheap construction cost. Many of those traditional type structures experienced serious damages. The use of masonry is very common in some of the world's most hazard-prone regions, such as in Latin America, Africa, the Indian subcontinent and other parts of Asia, the Middle East, and southern Europe. Based on damage and failure mechanism of those buildings, the parameters affecting the seismic performance of those traditional buildings are analyzed in this paper. The foundation type, soil conditions, production method of the masonry blocks, construction method, the geometry of the masonry walls, workmanship quality, existence of wooden beams, type of roof, mortar between adobe blocks are studied in order to understand the reason of damage for these types of buildings. (paper)

  7. Integrated study of geophysical and biological anomalies before earthquakes (seismic and non-seismic), in Austria and Indonesia

    Science.gov (United States)

    Straka, Wolfgang; Assef, Rizkita; Faber, Robert; Ferasyi, Reza

    2015-04-01

    of different geological and seismological character (Sabang and Simeulue, Sumatra, and Buleleng, Bali). Field studies, at the moment, are focused on Nias Island, Sumatra, Indonesia, and the Mur-Mürz-Transform Fault (Semmering area) in Austria. Next year it is planned to extend activities to Yogyakarta Province, Java, Indonesia. Geophysical factors selected for analysis include weather (the usual parameters), high-frequency magnetic variations, air ionization, soil gas emissions, and seismic and acoustic vibrations. Long-term measurements are needed to look for behavioral correlates of geophysical variations in general, in order to define "normal", before conclusive evidence can be presented in regard to "abnormal" precursory earthquake phenomena in particular.

  8. The Java Series. GUI Building with Swing

    CERN Multimedia

    CERN. Geneva

    2000-01-01

    The Swing Java package contains all the components that you expect to see in a modern User Interface, from buttons that contain pictures to trees and grids. It is a big library but it's designed to have the appropriate complexity for the task at hand - if something is simple you don't have to write much code to get it done, but if you want the power to manipulate and deeply customise it you also have it. This tutorial will introduce you to the basic set of components that Swing provides and to the mechanisms behind them. It will provide an overview of what you can do with Swing, even if you are new to GUI programming. However, if you want to follow closely the mechanisms behind what's being explained, it is convenient to have some basic knowledge of the main concepts of Java AWT (class hierarchy and event model) as provided by the previous tutorial of the Java Series. Organiser(s): M.Marquina and R.Ramos /IT-User Support

  9. ELIST8: simulating military deployments in Java

    International Nuclear Information System (INIS)

    Van Groningen, C. N.; Blachowicz, D.; Braun, M. D.; Simunich, K. L.; Widing, M. A.

    2002-01-01

    Planning for the transportation of large amounts of equipment, troops, and supplies presents a complex problem. Many options, including modes of transportation, vehicles, facilities, routes, and timing, must be considered. The amount of data involved in generating and analyzing a course of action (e.g., detailed information about military units, logistical infrastructures, and vehicles) is enormous. Software tools are critical in defining and analyzing these plans. Argonne National Laboratory has developed ELIST (Enhanced Logistics Intra-theater Support Tool), a simulation-based decision support system, to assist military planners in determining the logistical feasibility of an intra-theater course of action. The current version of ELIST (v.8) contains a discrete event simulation developed using the Java programming language. Argonne selected Java because of its object-oriented framework, which has greatly facilitated entity and process development within the simulation, and because it fulfills a primary requirement for multi-platform execution. This paper describes the model, including setup and analysis, a high-level architectural design, and an evaluation of Java

  10. Jannovar: a java library for exome annotation.

    Science.gov (United States)

    Jäger, Marten; Wang, Kai; Bauer, Sebastian; Smedley, Damian; Krawitz, Peter; Robinson, Peter N

    2014-05-01

    Transcript-based annotation and pedigree analysis are two basic steps in the computational analysis of whole-exome sequencing experiments in genetic diagnostics and disease-gene discovery projects. Here, we present Jannovar, a stand-alone Java application as well as a Java library designed to be used in larger software frameworks for exome and genome analysis. Jannovar uses an interval tree to identify all transcripts affected by a given variant, and provides Human Genome Variation Society-compliant annotations both for variants affecting coding sequences and splice junctions as well as untranslated regions and noncoding RNA transcripts. Jannovar can also perform family-based pedigree analysis with Variant Call Format (VCF) files with data from members of a family segregating a Mendelian disorder. Using a desktop computer, Jannovar requires a few seconds to annotate a typical VCF file with exome data. Jannovar is freely available under the BSD2 license. Source code as well as the Java application and library file can be downloaded from http://compbio.charite.de (with tutorial) and https://github.com/charite/jannovar. © 2014 WILEY PERIODICALS, INC.

  11. A programming and a modelling perspective on the evaluation of Java Card implementations

    NARCIS (Netherlands)

    Hartel, Pieter H.; de Jong, E.; de Jong, Eduard; Attali, Isabelle; Jensen, Thomas

    Java Card Technology has provided a huge step forward in programming smart cards: from assembler to using a high level Object Oriented language. However, the authors have found some differences between the current Java Card version (2.1) and main stream Java that may restrict the benefits of using

  12. Multiprocessor Priority Ceiling Emulation for Safety-Critical Java

    DEFF Research Database (Denmark)

    Strøm, Torur Biskopstø; Schoeberl, Martin

    2015-01-01

    Priority ceiling emulation has preferable properties on uniprocessor systems, such as avoiding priority inversion and being deadlock free. This has made it a popular locking protocol. According to the safety-critical Java specication, priority ceiling emulation is a requirement for implementations....... However, implementing the protocol for multiprocessor systemsis more complex so implementations might perform worse than non-preemptive implementations. In this paper we compare two multiprocessor lock implementations with hardware support for the Java optimized processor: non-preemptive locking...

  13. Development of a Java Package for Matrix Programming

    OpenAIRE

    Lim, Ngee-Peng; Ling, Maurice HT; Lim, Shawn YC; Choi, Ji-Hee; Teo, Henry BK

    2003-01-01

    We had assembled a Java package, known as MatrixPak, of four classes for the purpose of numerical matrix computation. The classes are matrix, matrix_operations, StrToMatrix, and MatrixToStr; all of which are inherited from java.lang.Object class. Class matrix defines a matrix as a two-dimensional array of float types, and contains the following mathematical methods: transpose, adjoint, determinant, inverse, minor and cofactor. Class matrix_operations contains the following mathematical method...

  14. Earthquakes and Earthquake Engineering. LC Science Tracer Bullet.

    Science.gov (United States)

    Buydos, John F., Comp.

    An earthquake is a shaking of the ground resulting from a disturbance in the earth's interior. Seismology is the (1) study of earthquakes; (2) origin, propagation, and energy of seismic phenomena; (3) prediction of these phenomena; and (4) investigation of the structure of the earth. Earthquake engineering or engineering seismology includes the…

  15. Three-dimensional (3D) coseismic deformation map produced by the 2014 South Napa Earthquake estimated and modeled by SAR and GPS data integration

    Science.gov (United States)

    Polcari, Marco; Albano, Matteo; Fernández, José; Palano, Mimmo; Samsonov, Sergey; Stramondo, Salvatore; Zerbini, Susanna

    2016-04-01

    In this work we present a 3D map of coseismic displacements due to the 2014 Mw 6.0 South Napa earthquake, California, obtained by integrating displacement information data from SAR Interferometry (InSAR), Multiple Aperture Interferometry (MAI), Pixel Offset Tracking (POT) and GPS data acquired by both permanent stations and campaigns sites. This seismic event produced significant surface deformation along the 3D components causing several damages to vineyards, roads and houses. The remote sensing results, i.e. InSAR, MAI and POT, were obtained from the pair of SAR images provided by the Sentinel-1 satellite, launched on April 3rd, 2014. They were acquired on August 7th and 31st along descending orbits with an incidence angle of about 23°. The GPS dataset includes measurements from 32 stations belonging to the Bay Area Regional Deformation Network (BARDN), 301 continuous stations available from the UNAVCO and the CDDIS archives, and 13 additional campaign sites from Barnhart et al, 2014 [1]. These data constrain the horizontal and vertical displacement components proving to be helpful for the adopted integration method. We exploit the Bayes theory to search for the 3D coseismic displacement components. In particular, for each point, we construct an energy function and solve the problem to find a global minimum. Experimental results are consistent with a strike-slip fault mechanism with an approximately NW-SE fault plane. Indeed, the 3D displacement map shows a strong North-South (NS) component, peaking at about 15 cm, a few kilometers far from the epicenter. The East-West (EW) displacement component reaches its maximum (~10 cm) south of the city of Napa, whereas the vertical one (UP) is smaller, although a subsidence in the order of 8 cm on the east side of the fault can be observed. A source modelling was performed by inverting the estimated displacement components. The best fitting model is given by a ~N330° E-oriented and ~70° dipping fault with a prevailing

  16. Molecule-oriented programming in Java

    NARCIS (Netherlands)

    Bergstra, J.A.

    2002-01-01

    Molecule-oriented programming is introduced as a programming style carrying some perspective for Java. A sequence of examples is provided. Supporting the development of the molecule-oriented programming style several matters are introduced and developed: profile classes allowing the representation

  17. Recaf: Java dialects as libraries

    NARCIS (Netherlands)

    Biboudis, A. (Aggelos); P.A. Inostroza Valdera (Pablo); T. van der Storm (Tijs)

    2016-01-01

    textabstractMainstream programming languages like Java have limited support for language extensibility. Without mechanisms for syntactic abstraction, new programming styles can only be embedded in the form of libraries, limiting expressiveness. In this paper, we present Recaf, a lightweight tool for

  18. Remote Laboratory Java Server Based on JACOB Project

    Directory of Open Access Journals (Sweden)

    Pavol Bisták

    2011-02-01

    Full Text Available Remote laboratories play an important role in the educational process of engineers. This paper deals with the structure of remote laboratories. The principle of the proposed remote laboratory structure is based on the Java server application that communicates with Matlab through the COM technology for the data exchange under the Windows operating system. Java does not support COM directly so the results of the JACOB project are used and modified to cope with this problem. In laboratories for control engineering education a control algorithm usually runs on a PC with Matlab that really controls the real plant. This is the server side described in the paper in details. To demonstrate the possibilities of a remote control a Java client server application is also introduced. It covers communication and offers a user friendly interface for the control of a remote plant and visualization of measured data.

  19. The effect of complex fault rupture on the distribution of landslides triggered by the 12 January 2010, Haiti earthquake

    Science.gov (United States)

    Harp, Edwin L.; Jibson, Randall W.; Dart, Richard L.; Margottini, Claudio; Canuti, Paolo; Sassa, Kyoji

    2013-01-01

    The MW 7.0, 12 January 2010, Haiti earthquake triggered more than 7,000 landslides in the mountainous terrain south of Port-au-Prince over an area that extends approximately 50 km to the east and west from the epicenter and to the southern coast. Most of the triggered landslides were rock and soil slides from 25°–65° slopes within heavily fractured limestone and deeply weathered basalt and basaltic breccia. Landslide volumes ranged from tens of cubic meters to several thousand cubic meters. Rock slides in limestone typically were 2–5 m thick; slides within soils and weathered basalt typically were less than 1 m thick. Twenty to thirty larger landslides having volumes greater than 10,000 m3 were triggered by the earthquake; these included block slides and rotational slumps in limestone bedrock. Only a few landslides larger than 5,000 m3 occurred in the weathered basalt. The distribution of landslides is asymmetric with respect to the fault source and epicenter. Relatively few landslides were triggered north of the fault source on the hanging wall. The densest landslide concentrations lie south of the fault source and the Enriquillo-Plantain-Garden fault zone on the footwall. Numerous landslides also occurred along the south coast west of Jacmél. This asymmetric distribution of landsliding with respect to the fault source is unusual given the modeled displacement of the fault source as mainly thrust motion to the south on a plane dipping to the north at approximately 55°; landslide concentrations in other documented thrust earthquakes generally have been greatest on the hanging wall. This apparent inconsistency of the landslide distribution with respect to the fault model remains poorly understood given the lack of any strong-motion instruments within Haiti during the earthquake.

  20. Server Interface Descriptions for Automated Testing of JavaScript Web Applications

    DEFF Research Database (Denmark)

    Jensen, Casper Svenning; Møller, Anders; Su, Zhendong

    2013-01-01

    Automated testing of JavaScript web applications is complicated by the communication with servers. Specifically, it is difficult to test the JavaScript code in isolation from the server code and database contents. We present a practical solution to this problem. First, we demonstrate that formal...... server interface descriptions are useful in automated testing of JavaScript web applications for separating the concerns of the client and the server. Second, to support the construction of server interface descriptions for existing applications, we introduce an effective inference technique that learns...... communication patterns from sample data. By incorporating interface descriptions into the testing tool Artemis, our experimental results show that we increase the level of automation for high-coverage testing on a collection of JavaScript web applications that exchange JSON data between the clients and servers...