WorldWideScience

Sample records for sous vide products

  1. Tambaqui (Colossoma macropomum sous vide: characterization and quality parameters

    Directory of Open Access Journals (Sweden)

    Fabiane de Cássia Pontes Ramos

    2016-02-01

    Full Text Available The objective of this study was to evaluate the microbiological, physical and physico-chemical quality parameters of sous vide preparation of pen-reared tambaqui (Colossoma macropomum. To prepare the tambaqui sous vide, 200 g of fillet, 50 g of basil sauce (1:4 fish fillet:sauce ratio and 10 mL of 5% sodium lactate were used. The product was then vacuum-packaged, pasteurized at 65 ºC for 12.5 min and refrigerated. The presence of Salmonella spp., sulfite-reducing Clostridium and Listeria monocytogenes was not detected in the samples analyzed. The coliform count at 45 ºC and coagulase-positive staphylococci were below the limit (103 permitted by the law in vigor. Water retention capacity and chloride content analyses revealed that the tambaqui fillet differed significantly (P<0.05 from the sous vide because of the addition of basil sauce. The total volatile basic nitrogen (TVB-N and thiobarbituric acid reactive substances (TBARS content of the fillet and sous vide were below the limits established by the law, indicating good quality. The lightness (L* and yellow color (b* of the fillet and the sous vide did not differ significantly (P>0.05, but the red color (a* decreased in the sous vide, which is related to the addition of basil sauce. The chroma (C* and hue angle (ho differed significantly (P<0.05, and the fillet samples were lighter in color, whereas the sous vide was characterized by yellow color. The n-6/n-3 ratios found for the fillet and the sous vide are within the recommended values, which is important for human metabolism. The fillet and sous vide also had high calcium, zinc, magnesium and potassium concentrations. It is concluded that tambaqui sous vide is a good source of nutrients, rich in fatty acids and minerals essential for human health.

  2. Palatability of sous vide processed chicken breast.

    Science.gov (United States)

    Turner, B E; Larick, D K

    1996-08-01

    The influences of brine composition, internal temperature, heating rate, and storage periods up to 28 d on flavor, texture, and color of sous vide processed chicken breast were evaluated. Pectoralis major muscles containing water and sodium chloride, with or without sodium lactate, were browned and vacuum packaged. Sous vide processing was by fast or slow heating to an internal temperature of 77 or 94 C. Product was evaluated after 0, 14, and 28 d storage at 4 C. Quality was evaluated by gas chromatographic analyses of flavor volatiles, shear, color, and sensory panels. Incorporation of sodium lactate into brine did not influence oxidative stability (as measured by headspace gas chromatography) or sensory warmed-over flavor. Presence of sodium lactate did result in enhanced fresh roasted or meaty and saltiness sensory scores as well as a more yellow color. The more rapid heating rate decreased sulfur-containing compounds and did not influence other volatile concentrations. Products processed to 94 C were less juicy, less tender, and contained higher quantities of alcohols and hydrocarbons than those processed to 77 C. Storage resulted in a decline in fresh roasted or meaty flavor note and an increase in warmed-over flavor note and quantities of alcohols, aldehydes and ketones, hydrocarbons, and total headspace volatiles.

  3. The Sous Vide Revolution: Coming Full Circle and Beyond

    OpenAIRE

    Hoeche, Ulrich

    2016-01-01

    For the purpose of this research, academic material and online sources were utilised to clarify the meaning of the key term sous vide. The Sous Vide Advisory Committee (1991) says ‘Sous Vide (also known as Cuisine en Papillote) is an interrupted catering system in which raw or par-cooked food is sealed into a vacuumised laminated plastic pouch or container, heat treated by controlled cooking, rapidly cooled and then reheated for service after a period of chilled storage’. According to Herb...

  4. Vacuum welding of metals; Soudage des metaux sous vide

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J A; Briola, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    This new welding process has been developed by the Commissariat a l'Energie Atomique (CEA) in France. The edges of the work-pieces are melted by the impact of an electron beam produced by an electron gun. Welding is carried out in a vacuum of 10{sup -4} to 10{sup -8} mm of mercury. The welding machine consists, diagrammatically, of: a) a metal enclosure in which a vacuum is produced; b) a cathode for electron emission, a high-voltage generator for accelerating these electrons, a focusing device; c) a mechanical device for moving (rotating) the work-piece. Advantages of the process: 1) possible welding of highly oxidizable metals (e.g. zirconium); 2) fabrication of high-vacuum-sealed metal containers; 3) production of very deeply penetrated welds. Therefore, this new process is particularly advantageous for atomic power applications, the fabrication of electron tubes and, more generally, for all industries in which very special metals are used. (author) [French] Ce procede de soudage a ete recemment mis au point au Commissariat a l'Energie Atomique en France (CEA). Il consiste a utiliser, pour fondre les levres des pieces a souder, l'impact d'un faisceau d'electrons produit par un canon a electrons. Le soudage s'effectue sous un vide de 10{sup -4} a 10{sup -8} mm de mercure. La machine a souder se compose schematiquement: a) d'une enceinte metallique ou l'on fait le vide; b) d'une cathode emettant des electrons, d'un generateur H.T. permettant d'accelerer ces electrons d'un dispositif de focalisation; c) d'un dispositif mecanique permettant le deplacement (rotation) de la piece a souder. Avantages de ce procede: 1) possibilite de souder les metaux tres oxydables (exemple: zirconium); 2) realisation de 'containers' metalliques fermes sous vide pousse; 3) obtention de profondeurs de soudures considerables. Ce nouveau procede est donc particulierement interessant pour l ' energie atomique, la fabrication des tubes electroniques et, en general, toutes les industries

  5. Development of Pangasius steaks by improved sous-vide technology and its process optimization.

    Science.gov (United States)

    Kumari, Namita; Singh, Chongtham Baru; Kumar, Raushan; Martin Xavier, K A; Lekshmi, Manjusha; Venkateshwarlu, Gudipati; Balange, Amjad K

    2016-11-01

    The present study embarked on the objective of optimizing improved sous - vide processing condition for development of ready-to-cook Pangasius steaks with extended shelf-life using response surface methodology. For the development of improved sous - vide cooked product, Pangasius steaks were treated with additional hurdles in various combinations for optimization. Based on the study, suitable combination of chitosan and spices was selected which enhanced antimicrobial and oxidative stability of the product. The Box-Behnken experimental design with 15 trials per model was adopted for designing the experiment to know the effect of independent variables, namely chitosan concentration (X 1 ), cooking time (X 2 ) and cooking temperature (X 3 ) on dependent variable i.e. TBARS value (Y 1 ). From RSM generated model, the optimum condition for sous - vide processing of Pangasius steaks were 1.08% chitosan concentration, 70.93 °C of cooking temperature and 16.48 min for cooking time and predicted minimum value of multiple response optimal condition was Y = 0.855 mg MDA/Kg of fish. The high correlation coefficient (R 2  = 0.975) between the model and the experimental data showed that the model was able to efficiently predict processing condition for development of sous - vide processed Pangasius steaks. This research may help the processing industries and Pangasius fish farmer as it provides an alternative low cost technology for the proper utilization of Pangasius .

  6. Changes in Meat Quality Characteristics of the Sous-vide Cooked Chicken Breast during Refrigerated Storage.

    Science.gov (United States)

    Hong, Go-Eun; Kim, Ji-Han; Ahn, Su-Jin; Lee, Chi-Ho

    2015-01-01

    This study was performed to investigate the changes in meat quality characteristics of the sous vide cooked chicken breast during refrigerated storage at 4℃ for 14 d between before and after sous-vide cooking. Cooking loss and shear force were significantly increased, whereas expressible drip was significantly decreased along with reduction in the water holding capacity in both of two groups. Redness of meat juice was significantly (p<0.05) increased during storage, and considerably increased in the refrigerated samples after sous-vide cooked at the 7 to 10 d. The thiobarbituric acid reactive substances (TBARS) was significantly increased and was higher in the refrigerator stored chicken breast samples after sous-vide cooking. The volatile basic nitrogen (VBN) value was significantly increased in both groups, but the VBN value of the stored raw meat sample before sous-vide cooking was increased at an early storage, while the VBN value of the stored sample after sous-vide cooking was increased gradually in this study. Total viable counts and coliform counts were significantly decreased during storage, and coliforms were not detected after 7 d of storage in both groups. Salmonella spp. was not detected during the whole studied period. The outcome of this research can provide preliminary data that could be used to apply for further study of chicken breast using sous-vide cooking method that could be attractive to consumers.

  7. Effect of sous vide processing on physicochemical, ultrastructural, microbial and sensory changes in vacuum packaged chicken sausages.

    Science.gov (United States)

    Naveena, B M; Khansole, Panjab S; Shashi Kumar, M; Krishnaiah, N; Kulkarni, Vinayak V; Deepak, S J

    2017-01-01

    The processing of sous vide chicken sausages was optimized under vacuum packaging condition and cooking at 100 ℃ for 30 min (SV30), 60 min (SV60) and 120 min (SV120) and compared with aerobically cooked control at 100 ℃ for 30 min. Sous vide processing of chicken sausages (SV30) produced higher (p emulsion ultra-structure due to SV30 processing relative to control sausages. Sous vide processing of chicken sausages enriched with rosemary diterpene phenols retained the freshness and quality up to 120 days during storage at 4 ± 1 ℃ relative to control sausages that were spoiled on 20th day. Lipid oxidation and microbial growth remained below the spoilage levels for all the SV-processed sausages throughout the storage and addition of rosemary diterpene mixture at 0.02% v/w reduced the microbial growth and improved (p < 0.05) the sensory attributes. Our results demonstrate that sous vide processing minimizes lipid oxidation and microbial growth of chicken sausages with improved product quality and shelf-life at 4 ± 1 ℃. © The Author(s) 2016.

  8. Thermograms of the combined High Hydrostatic Pressure and Sous-vide treated Longissimus dorsi of pork

    Science.gov (United States)

    Kenesei, Gy; Jónás, G.; Salamon, B.; Dalmadi, I.

    2017-10-01

    In this work, slices of Longissimus dorsi of pork was used as raw material to establish the effects of the sous-vide technology and the high hydrostatic pressure treatments (and their combinations) on meat. The state of the proteins in meat has a very important effect on several quality parameters of the product, such as weight loss, water holding capacity, organoleptic properties. Therefore it is important to follow and analyse the denaturation of the protein content during food processing. The samples were cooked sous-vide (60 °C, 5-480 minutes) or pressurized (100-600 MPa, 5 minutes, room temperature). Also two steps treatments were studied combining both technologies, applying high hydrostatic pressure treatment (300 or 600 MPa, 5 minutes, room temperature) after or previous to sous-vide cooking (60 °C, 30 minutes). The changes in the condition of meat proteins were followed by a differential scanning calorimeter. The DSC curves were analysed using the unit’s own software where denaturation heat was determined. Thermograms show through the change of the sample’s protein state the dissimilar effect of the treatments. Using the Polar Qualification System -previously proved to be effective with NIR measurements- the spectral information was reduced to a two dimensional polar co-ordinate system where each DSC curve is represented by a “quality point”. As a new experiment the applied PQS data reduction method compared to the traditional thermal analysis data processing gave us less information on the differences of our samples although the results are promising as we were able to detect the same trends and characteristics.

  9. Effects of combined electron-beam irradiation and sous-vide treatments on microbiological and other qualities of chicken breast meat

    International Nuclear Information System (INIS)

    Shamsuzzaman, K.; Lucht, L.; Chuaqui-Offermanns, N.

    1994-01-01

    The microbiological safety, refrigeration shelf-life, and nutritional quality of chicken breast meat were investigated following combined electron-beam irradiation and cooking under vacuum (sous-vide). Chicken breast meat inoculated with 10 6 CFU/g of Listeria monocytogenes was irradiated with an electron beam at doses up to 3.1 kGy under vacuum in barrier bags, cooked in a boiling water bath for 3 min 45 s (previously determined to achieve an internal temperature of 71.1 o C), and stored at 8 o C for up to 5 weeks. Listeria was undetectable in samples treated with combined sous-vide and irradiation at 3.1 kGy, but the organism survived the sous-vide treatment without irradiation and multiplied during storage. A similar study, conducted with uninoculated chicken breast meat, revealed that the product which received both irradiation (3 kGy) and sous-vide treatment had a shelf-life of at least 8 weeks at 8 o C, whereas the unirradiated samples treated sous-vide spoiled in 16 days. Listeria was undetectable in combination treated samples, but some of the unirradiated sous-vide samples tested after long storage showed high levels of Listeria. Some loss of thiamine occurred with the combined treatments. (author)

  10. Volatile compound profile of sous-vide cooked lamb loins at different temperature-time combinations.

    Science.gov (United States)

    Roldán, Mar; Ruiz, Jorge; Del Pulgar, José Sánchez; Pérez-Palacios, Trinidad; Antequera, Teresa

    2015-02-01

    Lamb loins were subjected to sous-vide cooking at different combinations of temperature (60 and 80°C) and time (6 and 24h) to assess the effect on the volatile compound profile. Major chemical families in cooked samples were aliphatic hydrocarbons and aldehydes. The volatile compound profile in sous-vide cooked lamb loin was affected by the cooking temperature and time. Volatile compounds arising from lipid oxidation presented a high abundance in samples cooked at low or moderate cooking conditions (60°C for 6 and 24h, 80°C for 6h), while a more intense time and temperature combination (80°C for 24h) resulted on a higher concentration of volatile compounds arising from Strecker degradations of amino acids, as 2-methylpropanal and 3-methylbutanal. Therefore, sous-vide cooking at moderately high temperatures for long times would result in the formation of a stronger meaty flavor and roast notes in lamb meat. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. Effect of the cooking method (grilling, roasting, frying and sous-vide) on the oxidation of thiols, tryptophan, alkaline amino acids and protein cross-linking in jerky chicken

    OpenAIRE

    Silva, Fábio A. P.; Ferreira, Valquíria C. S.; Madruga, Marta S.; Estévez, Mario

    2016-01-01

    Broiler breast (pectoralis major) meat was submitted to salting with NaCl + NaNO3 followed by a drying process to produce jerky-type chicken. The final product (raw broiler charqui) was desalted and then cooked using grilled, roasted, fried and sous-vide techniques. Sous-vide cooked samples showed lowest results of moisture loss compared to roasted and fried ones. Fatty acid profile suffered minor changes after cooking of broiler charqui. Regarding to protein oxidation, tryptophan fluorescenc...

  12. Machine for extrusion under vacuum; Machine de fluage sous vide

    Energy Technology Data Exchange (ETDEWEB)

    Gautier, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    In a study of the behaviour of easily oxidised metals during the extrusion process, it is first necessary to find an effective mean of fighting corrosion, since this, even when barely detectable, has an important influence on the validity of the results recorded. The neatest and also the most efficient of all the methods tried consists in creating a vacuum around the test piece. Working on this principle, and at the same time respecting the conventional rules for extrusion tests (loading the sample after stabilisation at the testing temperature, differential measurements of lengthening, etc.) we found it necessary to construct an original machine. (author) [French] L'etude du comportement au fluage des materiaux facilement oxydables exige, en premier lieu, une lutte efficace contre la corrosion qui, meme a peine decelable, prend une part preponderante quant a la validite des resultats enregistres. La solution la plus elegante, et, a vrai dire, la plus energique parmi toutes les methodes essayees, consiste a realiser le vide autour de l'eprouvette d'essai. Partant de ce principe, et pour sauvegarder les regles classiques de l'essai de fluage (mise en charge de l'eprouvette apres stabilisation en temperature d'essai, mesures differentielles des allongements, etc.) nous nous sommes trouves dans la necessite de construire une machine inedite. (auteur)

  13. Machine for extrusion under vacuum; Machine de fluage sous vide

    Energy Technology Data Exchange (ETDEWEB)

    Gautier, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    In a study of the behaviour of easily oxidised metals during the extrusion process, it is first necessary to find an effective mean of fighting corrosion, since this, even when barely detectable, has an important influence on the validity of the results recorded. The neatest and also the most efficient of all the methods tried consists in creating a vacuum around the test piece. Working on this principle, and at the same time respecting the conventional rules for extrusion tests (loading the sample after stabilisation at the testing temperature, differential measurements of lengthening, etc.) we found it necessary to construct an original machine. (author) [French] L'etude du comportement au fluage des materiaux facilement oxydables exige, en premier lieu, une lutte efficace contre la corrosion qui, meme a peine decelable, prend une part preponderante quant a la validite des resultats enregistres. La solution la plus elegante, et, a vrai dire, la plus energique parmi toutes les methodes essayees, consiste a realiser le vide autour de l'eprouvette d'essai. Partant de ce principe, et pour sauvegarder les regles classiques de l'essai de fluage (mise en charge de l'eprouvette apres stabilisation en temperature d'essai, mesures differentielles des allongements, etc.) nous nous sommes trouves dans la necessite de construire une machine inedite. (auteur)

  14. Microbiological and other characteristics of chicken breast meat following electron-beam and sous-vide treatments

    International Nuclear Information System (INIS)

    Shamsuzzaman, K.; Chuaqui-Offermanns, N.; Lucht, L.; McDougall, T.; Borsa, J.

    1992-01-01

    The combined effects of radiation and sous-vide treatment of chicken breast meat were investigated with respect to survival and growth of Listeria monocytogenes, shelf life, thiamine content, and sensory qualities. Chicken breasts were inoculated with L. monocytogenes 81-861 (10(5) CFU/G), vacuum-packed, irradiated with electron beam (EB) up to 2.9 kGy, and cooked to an internal temperature of 65.6 degrees C. Sous-vide treatment alone had marginal lethal effect on the L. monocytogenes; the residual inoculum reached 10(7) CFU/g after 8 weeks at 2 degrees C. However, after the combined treatments of sous-vide and EB at 2.9 kGy, the organism remained undetectable during the 8-week storage period. Parallel studies on uninoculated breast meat revealed that sous-vide samples had a shelf life of less than 6 weeks without EB treatment, whereas samples that were irradiated and then received sous-vide treatment had a shelf life of at least 8 weeks. There was a slight reduction in thiamine levels as a result of the EB treatment, but there was essentially no additional loss of thiamine due to the subsequent sous-vide treatment and storage at 2 degrees C. Electron-beam treatment had very little effect on the odor and flavor of the reheated samples. It was concluded that EB treatment combined with, sous-vide treatment can greatly enhance the microbial safety and shelf life of chicken breast meat

  15. Vacuum brazing of metals (1961); Brassure sous vide des metaux (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Lapujoulade, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    We have studied brazing in vacuum aiming its application for the making of containers and apparatus meant for high vacuum (p < 10{sup -8} torr). We first define the wettability of a brazing alloy on a metal and we remind the influence of the various parameters which act on this wettability (nature of the solid, of the liquid, geometrical and physicochemical state of the surface, metallurgical reactions occurring at the interface, temperature, time). We give then the results of the tests carried out in order to determine the conditions of wettability in vacuum of some brazing alloys on metals which can be used for the above mentioned apparatus (stainless steel, aluminium, bronze, titanium, zirconium, kovar, nickel, copper). (author) [French] Nous avons etudie la brasure sous vide en vue de son application a la construction d'enceintes et apparelilage destines a l'obtention des vides eleves (p < 10{sup -8} torr). Nous definissons d'abord la mouillabilite d'une brasure sur un metal et nous rappelons l'influence des differents parametres qui agissent sur cette mouillabilite (nature du solide, du liquide, etat geometrique et physico-chimique de la surface, reactions metallurgiques a l'interface, temperature, temps). Nous donnons ensuite les resultats des essais effectues dans le but de determiner les conditions de mouillabilite sous vide de certaines brassures sur des metaux utilisables dans les constructions mentionnees ci-dessus (acier inoxydable, bronze d'aluminium, titane, zirconium, kovar, nickel, cuivre). (auteur)

  16. Leuconostoc rapi sp. nov., isolated from sous-vide cooked rutabaga

    DEFF Research Database (Denmark)

    Lyhs, Ulrike; Snauwaert, I.; Pihlajaviita, S.

    2015-01-01

    A Gram-positive, ovoid lactic acid bacterium, strain LMG 27676T, was isolated from a spoiled sous-vide cooked rutabaga. 16S rRNA gene sequence analysis indicated that the novel strain belongs to the genus Leuconostoc, with Leuconostoc kimchi and Leuconostoc miyukkimchii as nearest neighbours (99.......1 and 98.8% 16S rRNA gene sequence similarity towards the type strain, respectively). Phylogenetic analysis of the 16S rRNA gene, multilocus sequence analysis of the pheS, rpoA and atpA genes, and biochemical and genotypic characteristics allowed to differentiate strain LMG 27676T from all established...

  17. Changes provoked by boiling, steaming and sous-vide cooking in the lipid and volatile profile of European sea bass.

    Science.gov (United States)

    Nieva-Echevarría, Bárbara; Manzanos, María J; Goicoechea, Encarnación; Guillén, María D

    2017-09-01

    This study aims to shed light on the changes provoked by boiling, steaming and sous-vide cooking on the lipids and volatile profile of farmed and wild European sea bass meat. None of the cooking techniques provoked changes due to hydrolytic or oxidation processes detectable by 1 H NMR on sea bass lipids. The lipid profile of main and minor lipidic components was maintained after cooking. However, study by SPME-GC/MS evidenced that steaming and sous-vide cooking modified the volatile profile of sea bass meat, especially in farmed specimens. The compounds generated came from the occurrence, to a very small extent, of lipid and protein degradation. By contrast, boiling scarcely modified the initial characteristics of raw sea bass. Thus, from a sensory point of view and considering the odour-active compounds generated, steaming and sous-vide cooking provoked more noticeable changes than boiling, especially in farmed sea bass meat. Copyright © 2017. Published by Elsevier Ltd.

  18. Effect of the cooking method (grilling, roasting, frying and sous-vide) on the oxidation of thiols, tryptophan, alkaline amino acids and protein cross-linking in jerky chicken.

    Science.gov (United States)

    Silva, Fábio A P; Ferreira, Valquíria C S; Madruga, Marta S; Estévez, Mario

    2016-08-01

    Broiler breast ( pectoralis major ) meat was submitted to salting with NaCl + NaNO 3 followed by a drying process to produce jerky-type chicken. The final product (raw broiler charqui) was desalted and then cooked using grilled, roasted, fried and sous-vide techniques. Sous-vide cooked samples showed lowest results of moisture loss compared to roasted and fried ones. Fatty acid profile suffered minor changes after cooking of broiler charqui. Regarding to protein oxidation, tryptophan fluorescence, protein carbonylation and disulphide bonds formation of chicken charqui were affected by cooking temperature while free thiol groups, Schiff base formation and hardness were mostly impacted by the length of cooking. Instrumental color of broiler charqui was affected by the type of cooking, being closely related with Maillard products formation. In conclusion, sous-vide technique seems to be the most advantageous cooking method to obtain high-quality ready-to-eat chicken charqui.

  19. Improvement of microbiological safety of sous-vide meals by gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    Farkas, J. E-mail: huto@omega.kee.hu; Polyak-Feher, K.; Andrassy, E.; Meszaros, L

    2002-03-01

    Experimental batches of smoked-cured pork in stewed beans sauce were inoculated with spores of psychrotrophic Bacillus cereus, more heat and radiation resistant than spores of non-proteolytic C. botulinum. After vacuum packaging, the meals were treated with combinations of pasteurizing heat treatments and gamma irradiation of 5 kGy. Prior and after treatments, and periodically during storage at 10 deg. C, total aerobic and total anerobic viable cell counts, and selectively, the viable cell counts of B. cereus and sulphite-reducing clostridia have been determined. The effects of the treatment order as well as addition of nisin to enhance the preservative efficiency of the physical treatments were also studied. Heat-sensitization of bacterial spores surviving irradiation occurred. The quality-friendly sous-vide cooking in combination with this medium dose gamma irradiation and/or nisin addition increased considerably the microbiological safety and the keeping quality of the meals studied. However, approx. 40% loss of thiamin content occurred as an effect of combination treatments, and adverse sensorial effects may also limit the feasible radiation doses or the usable concentrations of nisin.

  20. Improvement of microbiological safety of sous-vide meals by gamma radiation

    International Nuclear Information System (INIS)

    Farkas, J.; Polyak-Feher, K.; Andrassy, E.; Meszaros, L.

    2002-01-01

    Experimental batches of smoked-cured pork in stewed beans sauce were inoculated with spores of psychrotrophic Bacillus cereus, more heat and radiation resistant than spores of non-proteolytic C. botulinum. After vacuum packaging, the meals were treated with combinations of pasteurizing heat treatments and gamma irradiation of 5 kGy. Prior and after treatments, and periodically during storage at 10 deg. C, total aerobic and total anerobic viable cell counts, and selectively, the viable cell counts of B. cereus and sulphite-reducing clostridia have been determined. The effects of the treatment order as well as addition of nisin to enhance the preservative efficiency of the physical treatments were also studied. Heat-sensitization of bacterial spores surviving irradiation occurred. The quality-friendly sous-vide cooking in combination with this medium dose gamma irradiation and/or nisin addition increased considerably the microbiological safety and the keeping quality of the meals studied. However, approx. 40% loss of thiamin content occurred as an effect of combination treatments, and adverse sensorial effects may also limit the feasible radiation doses or the usable concentrations of nisin

  1. Shelf Life of Chicken Meat Balls Submitted to Sous Vide Treatment

    Directory of Open Access Journals (Sweden)

    ÖP Can

    2015-06-01

    Full Text Available The objective of this study was to investigate the appropriate temperature for processing storage of chicken meatballs made of minced chicken meat with the sous vide method. The chicken meatballs were prepared and separated into four experimental groups according to the application of heat treatment (10 and 20 minutes and storage time (+2 and +10°C. Sensory, microbiological (total aerobic mesophilic bacteria, total psychrotrophs, lactic acidbacteria, Enterobacteriaceae, Clostridiumperfringens, Listeria spp., chemical (pH, thiobarbituric acid, color (L*, a*, b* values, and texture profile analyses were performed on meatball samples. Cl. perfringens and Listeria spp. were not detected in meatball samples during the storage period. Samples cooked at 10 minute and stored at +2°C the highest count of total aerobic mesophilic bacteria (p<0.05. For lipid oxidation, interaction was observed between cooking time and storage temperature, with higher TBARs values for samples stored at 10 °C, while cooking time and storage temperature showed no influence on the color and textural analysis parameters. For the treatments evaluated, cooking time x storage temperature seem affect more microbiological and chemical parameters than color and textural parameters of chicken meatballs.

  2. Influence of Sous Vide and water immersion processing on polyacetylene content and instrumental color of parsnip (Pastinaca sativa) disks.

    Science.gov (United States)

    Rawson, Ashish; Koidis, Anastasios; Rai, Dilip K; Tuohy, Maria; Brunton, Nigel

    2010-07-14

    The effect of blanching (95 +/- 3 degrees C) followed by sous vide (SV) processing (90 degrees C for 10 min) on levels of two polyacetylenes in parsnip disks immediately after processing and during chill storage was studied and compared with the effect of water immersion (WI) processing (70 degrees C for 2 min.). Blanching had the greatest influence on the retention of polyacetylenes in sous vide processed parsnip disks resulting in significant decreases of 24.5 and 24% of falcarinol (1) and falcarindiol (2) respectively (p processing did not result in additional significant losses in polyacetylenes compared to blanched samples. Subsequent anaerobic storage of SV processed samples resulted in a significant decrease in 1 levels (p levels was observed (p > 0.05). 1 levels in WI processed samples were significantly higher than in SV samples (p processing with losses of up to 70% occurring after 5 days storage. 1 type polyacetylene undergoes degradation such as oxidation, dehydrogenation when thermally treated forming oxidized form of 1 type molecules, in this case falcarindione, dehydrofalcarinol, dehydrofalcarinone. Thermal processing had a significant effect on instrumental color of parsnip samples compared to minimally processed in both SV and WI processed samples resulting in parsnip disks becoming darker, yellower and browner following processing and storage.

  3. Determination of the Quality and Shelf Life of Sous Vide Cooked Turkey Cutlet Stored at 4 and 12ºC

    Directory of Open Access Journals (Sweden)

    IT Akoğlu

    Full Text Available ABSTRACT The aim of this study was to determine the quality and shelf life of sous vide turkey cutlet stored at 4 and 12ºC. Samples were packaged under vacuum into polyamide-polypropylene pouches, cooked using sous vide technology (65ºC/40 min, chilled at 3ºC and stored at 4 and 12ºC for 5 weeks. Microbial (TMAB, lactic acid bacteria, Enterobacteriaceae, moulds and yeasts, Salmonella spp., L. monocytogenes, Cl. perfringens, physical-chemical (pH, water activity, TBARS, L*a*b* colour, texture profile analysis and shear force and sensory (appearance, colour, odour, flavour, juiciness, chewiness and acceptance parameters were determined. According to the results of mesophilic bacterial counts and sensory analysis, the shelf life of the sous vide turkey cutlet, cooked at 65ºC for 40 min, was determined as 28 days at 4ºC while 15 days at 12ºC. Salmonella spp., L. monocytogenes, Cl. perfringens were not detected in turkey cutlet samples during the storage period. It was detected that sous vide cooked provided convenient ready-to-eat foods and a long shelf life for turkey cutlet.

  4. Influence of Citric Acid on the Pink Color and Characteristics of Sous Vide Processed Chicken Breasts During Chill Storage

    Science.gov (United States)

    Lim, Ki-Won

    2015-01-01

    Chicken breast dipped with citric acid (CA) was treated by sous vide processing and stored in a refrigerated state for 0, 3, 6, 9, and 14 d. A non-dipped control group (CON) and three groups dipped in different concentrations of citric acid concentration were analyzed (0.5%, 0.5CIT; 2.0%, 2CIT and 5.0%, 5CIT; w/v). Cooking yield and moisture content increased due to the citric acid. While the redness of the juice and meat in all groups showed significant increase during storage, the redness of the citric acid groups was reduced compared to the control group (pacid reactive substances (TBARS) were generally lower in the citric acid-treated samples than in untreated ones, indicating extended shelf life of the cooked chicken breast dipped in citric acid solution. The shear force of the 2CIT and 5CIT groups was significantly lower (pcitric acid concentrations. PMID:26761885

  5. Effect of different temperature-time combinations on lipid and protein oxidation of sous-vide cooked lamb loins.

    Science.gov (United States)

    Roldan, Mar; Antequera, Teresa; Armenteros, Monica; Ruiz, Jorge

    2014-04-15

    Forty-five lamb loins were subjected to sous-vide cooking at different combinations of temperature (60, 70 and 80 °C) and time (6, 12 and 24 h) to assess the effect on the oxidative stability of lipids and proteins. Heating induced both lipid and protein oxidation in lamb loins. Higher cooking temperature-time combinations increased conjugated dienes and decreased thiobarbituric reactive substances (TBARS) values and hexanal. Total protein carbonyls increased throughout time at all cooking temperatures considered, while α-aminoadipic (AAS) and γ-glutamic semialdehydes (GGS) increased when cooking at 60 °C but not at 80 °C. Links between the decrease in secondary compounds from lipid oxidation due to cooking at higher temperatures and for longer times with the increased levels of 3-methylbutanal and greater differences between total protein carbonyls and AAS plus GGS were hypothesised. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. Efficacy of Combined Sous Vide-Microwave Cooking for Foodborne Pathogen Inactivation in Ready-to-Eat Chicory Stems.

    Science.gov (United States)

    Renna, Massimiliano; Gonnella, Maria; de Candia, Silvia; Serio, Francesco; Baruzzi, Federico

    2017-07-01

    There is a variety of different food processing methods, which can be used to prepare ready-to-eat foods. However, the need to preserve the freshness and nutritional qualities leads to the application of mild technologies which may be insufficient to inactivate microbial pathogens. In this work, fresh chicory stems were packed under a vacuum in films, which were transparent to microwaves. These were then exposed to microwaves for different periods of time. The application of sous vide microwave cooking (SV-MW, 900 W, 2450 MHz), controlled naturally occurring mesophilic aerobic bacteria, yeasts and molds for up to 30 d when vacuum-packed vegetables were stored at 4 °C. In addition, the process lethality of the SV-MW 90 s cooking was experimentally validated. This treatment led to 6.07 ± 0.7 and 4.92 ± 0.65 log cfu/g reduction of Escherichia coli and Listeria monocytogenes inoculated over the chicory stems (100 g), respectively. With an initial load of 9 log cfu/g for both pathogens, less than 10 cfu/g of surviving cells were found after 90 s cooking. This shows that short-time microwave cooking can be used to effectively pasteurize vacuum-packed chicory stems, achieving >5 log cfu/g reduction of E. coli and L. monocytogenes. © 2017 Institute of Food Technologists®.

  7. Vacuum fusion of uranium; Fusion de l'uranium sous vide

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J. A.

    1957-06-04

    After having outlined that vacuum fusion and moulding of uranium and of its alloys have some technical and economic benefits (vacuum operations avoid uranium oxidation and result in some purification; precision moulding avoids machining, chip production and chemical reprocessing of these chips; direct production of the desired shape is possible by precision moulding), this report presents the uranium fusion unit (its low pressure enclosure and pumping device, the crucible-mould assembly, and the MF supply device). The author describes the different steps of cast production, and briefly comments the obtained results.

  8. Physicochemical and microbiological changes during the refrigerated storage of lamb loins sous-vide cooked at different combinations of time and temperature.

    Science.gov (United States)

    Roldán, Mar; Antequera, Teresa; Hernández, Alejandro; Ruiz, Jorge

    2015-10-01

    This study aimed to determine the influence of cooking temperature (either 60 ℃ or 80 ℃) and time (6 h or 24 h) on the physicochemical (weight loss, moisture content, instrumental color, instrumental texture, lipid and protein oxidation) and microbiological changes underwent by sous-vide cooked lamb loins during refrigerated storage for 30 days. There was a slight trend to decreasing weight losses in some of the cooking treatments, but only in samples cooked at 60 ℃ for 6 h it was paralleled with an increase in moisture content. The only noteworthy oxidative change was a marked decrease in conjugated dienes after two weeks of storage in samples cooked at 80 ℃ for 24 h. Neither instrumental texture nor color showed noticeable variations during the storage. Microbial population remained quite low during the whole refrigerated storage. Overall, most of the studied parameters showed only scarce changes throughout 30 days of refrigerated storage that most likely would not influence the quality of sous-vide cooked loin lambs. © The Author(s) 2014.

  9. Effect of different temperature-time combinations on physicochemical, microbiological, textural and structural features of sous-vide cooked lamb loins.

    Science.gov (United States)

    Roldán, Mar; Antequera, Teresa; Martín, Alberto; Mayoral, Ana Isabel; Ruiz, Jorge

    2013-03-01

    Lamb loins were subjected to sous-vide cooking at different combinations of temperature (60, 70, and 80 °C) and time (6, 12, and 24 h). Different physicochemical, histological and structural parameters were studied. Increasing cooking temperatures led to higher weight losses and lower moisture contents, whereas the effect of cooking time on these variables was limited. Samples cooked at 60 °C showed the highest lightness and redness, while increasing cooking temperature and cooking time produced higher yellowness values. Most textural variables in a texture profile analysis showed a marked interaction between cooking temperature and time. Samples cooked for 24h showed significantly lower values for most of the studied textural parameters for all the temperatures considered. Connective tissue granulation at 60 °C and gelation at 70 °C were observed in the SEM micrographs. The sous-vide cooking of lamb loins dramatically reduced microbial population even with the less intense heat treatment studied (60 °C-6 h). Copyright © 2012 Elsevier Ltd. All rights reserved.

  10. Effect of Grapefruit Seed Extract on Thermal Inactivation of Listeria monocytogenes during Sous-Vide Processing of Two Marinated Mexican Meat Entrées.

    Science.gov (United States)

    Valenzuela-Melendres, Martin; Peña-Ramos, E Aida; Juneja, Vijay K; Camou, Juan Pedro; Cumplido-Barbeitia, German

    2016-07-01

    D- and z-values for Listeria monocytogenes were obtained for two Mexican meat entrées: pork meat marinated in tomatillo (green tomato) sauce (PTS) and beef marinated in a red chili sauce (BRCS), with addition of 0, 200, and 800 ppm of grapefruit seed extract (GSE). Meat samples inoculated with L. monocytogenes were packaged in sterile bags, immersed in a water bath, and held at 55, 57.5, 60, and 62.5°C for different periods of time. Depending upon the temperature, D-values at 0 ppm of GSE ranged from 26.19 to 2.03 min in BRCS and 26.41 to 0.8 min in PTS. Adding 800 ppm of GSE to BRCS thermally treated at 55 and 62.5°C significantly decreased inactivation time by 35%. A reduction in time of 25.9, 10.6, and 40.1% at 55, 57.5, and 60°C, respectively, was observed in PTS with 800 ppm of GSE. The z-values of L. monocytogenes were not significantly affected by GSE addition; average z-values were 7.25 and 5.09°C for BRCS and PTS, respectively. Estimated thermal lethality for a 7-D log reduction of L. monocytogenes under commercial-size sous-vide conditions at a reference temperature of 55°C was reached at 78 and 71 min for BRCS without and with 800 ppm of GSE, respectively. For PTS, 7-D reduction was attained at 69 and 61 min without and with addition of 800 ppm of GSE, respectively. Supplementing both Mexican meat entrées (BRCS and PTS) with 800 ppm of GSE rendered L. monocytogenes cells more sensitive to the lethal effect of heat. The results of this study will assist the retail food industry in designing acceptance limits on critical control points pertaining to cooking regimes to effectively eliminate L. monocytogenes in BRCS and PTS sous-vide processed Mexican meat entrées.

  11. Effects of sous-vide method at different temperatures, times and vacuum degrees on the quality, structural, and microbiological properties of pork ham.

    Science.gov (United States)

    Jeong, Kiyoung; O, Hyeonbin; Shin, So Yeon; Kim, Young-Soon

    2018-04-10

    This study evaluated the influence of different factors on pork hams cooked by sous-vide method. The quality and structural and microbiological properties of the treated samples were compared with those of controls. Samples were subjected to treatment at different combinations of temperature (61 °C or 71 °C), time (45 or 90 min), and vacuum degree (98.81% or 96.58%). The control sample was air packaged and boiled for 45 min in boiling water. Temperature and vacuum degree affected quality properties, while the effect of time was limited. Samples cooked at 61 °C showed higher moisture content, redness, and pink color of the meat juice, whereas samples cooked at 71 °C showed higher cooking loss rate, lightness, and volatile basic nitrogen values. Texture analysis indicated tenderer meat for the treatment group than the control. No microbial growth was detected in any treatment groups. Meat cooked at 61 °C and 98.81% vacuum showed more spacious arrangement of meat fiber. Copyright © 2018 Elsevier Ltd. All rights reserved.

  12. Impregnation of Graphite with Liquid Silicon in a Vacuum; Impregnation du graphite avec du silicium llquide sous vide; Propitka grafita kremniem v vakuume; Impregnacion de grafito con silicio liquido en el vacio

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov, V. E.; Zelenskij, V. F.; Kolendovskij, M. K.; Kolomiets, L. D.

    1963-11-15

    A study was made of the possibility of producing high thermal resistance graphite-silicon carbide materials by means of impregnating MG graphite with liquid silicon in a vacuum. An attempt is made to explain the mechanism and origins of the degradation of products during the impregnation process. On the basis of their researches the authors put forward a number of technical requirements, observance of which make it possible to produce graphite-silicon carbide materials by means of impregnation of graphite with liquid silicon-in a vacuum at temperatures of 1450 to 1600 deg. C. (author) [French] Les auteurs etudient la possibilite d'obtenir, en impregnant du graphite MG avec du silicium liquide sous vide, des materiaux au graphite, carbure et silicium resistants a la chaleur. Ils cherchent a expliquer le mecanisme et les causes de la destruction des produits au cours de l'impregnation. Se fondant sur les resultats de leurs recherches, ils enoncent un certain nombre de conditions technologiques a remplir pour obtenir les materiaux en question en impregnant le graphite de silicium liquide sous vide, a une temperature de l'ordre de 1450 a 1600 deg. C. (author) [Spanish] Los autores han estudiado la posibilidad de preparar materiales de grafito y carburo de silicio de elevada resistencia termica impregnando grafito marca MG con silicio liquido en el vacio. Proponen una explicacion del mecanismo y de las causas de la degradacion de los productos durante la impregnacion. Sobre la base de las investigaciones realizadas, los autores enumeran una serie de condiciones tecnologicas cuyo cumplimiento permite preparar piezas de grafito y carburo de silicio, impregnando el grafito con silicio liquido en el vacio a temperaturas comprendidas entre 1450 y 1600 deg. C. [Russian] V rabote izuchalas' vozmozhnost' sozdaniya grafit-karbidkremnievykh materialov s povyshennoj termostojkost'yu putem propitki grafita marki MG zhidkim kremniem v vakuume. Sdelana popytka ob{sup y

  13. High vacuum high temperature x-ray camera (1961); Chambre de diffraction de rayons x a haute temperature sous vide pousse (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Baron, J L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    - This camera makes it possible to carry out X-ray studies on highly oxidisable materials, up to about 900 deg. C. Most of the existing models do not provide sufficient protection against the formation of surface oxide or carbide films on the sample. The present arrangement makes it possible to operate at very low pressures: 5 x 10{sup -8} to 10{sup -7} torr, thanks to an entirely metallic apparatus. The radiation heating system consists of an incandescent lamp, outside the evacuated portion, and a reflector which concentrates the energetic flux into the sample through a silica window. The heated parts have thus only a small thermal inertia. With the apparatus it has been possible to determine the phase parameters of uranium-{alpha} up to 650 deg. C with a precision of {+-} 0.0015 A. A similar study has been carried out on a uranium-chromium alloy in the {beta}-phase up to 740 deg. C. (author) [French] Cette chambre permet l'etude, par diffraction de rayons X, de materiaux tres oxydables, ceci jusqu'a 900 deg. C environ. La plupart des modeles existant a l'heure actuelle n'assurent pas une protection suffisante de l'echantillon contre la formation de films superficiels d'oxydes ou de carbures. La disposition d'ensemble permet d'operer sous des pressions tres basses: 5.10{sup -8} a 10{sup -7} torr, grace a une construction entierement metallique. Le systeme de chauffage par rayonnement associe une lampe a incandescence, exterieure a l'enceinte sous vide, et un reflecteur, qui concentre le flux energetique sur l'echantillon, a travers un hublot de silice. Les pieces echauffees ne presentent ainsi qu'une faible inertie thermique. L'appareil a permis la determination des parametres de l'uranjum en phase a, jusqu'a 650 deg. C, avec une precision de {+-} 0,0015 A. Une etude similaire a ete effectuee sur un alliage uranium-chrome, en phase {beta}, jusqu'a 740 deg. C. (auteur)

  14. Modelisation, conception et simulation des performances d'un collecteur solaire aeraulique a tubes sous vide en milieu nordique

    Science.gov (United States)

    Paradis, Pierre-Luc

    The global energy consumption is still increasing year after year even if different initiatives are set up to decrease fossil fuel dependency. In Canada 80% of the energy is used for space heating and domestic hot water heating in residential sector. This heat could be provided by solar thermal technologies despite few difficulties originating from the cold climate. The aim of this project is to design a solar evacuated tube thermal collector using air as the working fluid. Firstly, needs and specifications of the product are established in a clear way. Then, three concepts of collector are presented. The first one relies on the standard evacuated tube. The second one uses a new technology of tubes; both sides are open. The third one uses heat pipe to extract the heat from the tubes. Based on the needs and specification as criteria, the concept involving tubes with both sides open has been selected as the best idea. In order to simulate the performances of the collector, a model of the heat exchanges in an evacuated tube was developed in 4 steps. The first step is a model in steady state intended to calculate the stagnation temperature of the tube for a fixed solar radiation, outside temperature and wind speed. As a second step, the model is generalised to transient condition in order to validate it with an experimental setup. A root mean square error of 2% is then calculated. The two remainder steps are intended to calculate the temperature of airflow leaving the tube. In the same way, a first model in steady state is developed and then generalised to the transient mode. Then, the validation with an experimental setup gave a difference of 0.2% for the root mean square error. Finally, a preindustrial prototype intended to work in open loop for preheating of fresh air is presented. During the project, explosion of the both sides open evacuated tube in overheating condition blocked the construction of a real prototype for the test. Different path for further work are

  15. Kinetic Modeling of Vacuum Gas Oil Hydrotreatment using a Molecular Reconstruction Approach Modélisation cinétique de l’hydrotraitement de distillats sous vide utilisant une approche de reconstruction moléculaire

    Directory of Open Access Journals (Sweden)

    Charon-Revellin N.

    2010-10-01

    Full Text Available Vacuum Gas Oils (VGO are heavy petroleum cuts (boiling points ranging from 350 to 550 ˚C that can be transformed into valuable fuels (gasolines, diesels by fluid catalytic cracking or hydrocracking. Prior to these conversion processes, hydrotreating is required in order to eliminate the impurities in VGOs. The hydrotreatment process enables to meet the environmental specifications (total sulfur contents and to prevent nitrogen poisoning of conversion catalysts. In order to develop a kinetic model based on an accurate VGOs molecular description, innovative analytical tools and molecular reconstruction techniques were used in this work. A lumped model using a Langmuir-Hinshelwood representation was developed for hydrodearomatization, hydrodesulfurization and hydrodenitrogenation of the VGO. This lumped model was successfully applied to the experimental feed pretreatment data and was able to predict evolution of concentration of the aromatics, nitrogen and sulfur species. Les Distillats Sous Vide (DSV sont des coupes pétrolières lourdes (gamme de températures d'ébullition 350 à 550 °C qui peuvent être valorisées en carburants (essence, gazole par craquage catalytique ou par hydrocraquage. Un hydrotraitement est requis avant ces procédés de conversion afin d'éliminer les impuretés du DSV. De cette manière, le procédé d'hydrotraitement permet d'attendre les spécifications environnementales (teneur en soufre ainsi que de prévenir l'empoisonnement par les composés azotés des catalyseurs de conversion. De manière à pouvoir développer un modèle cinétique basé sur une description moléculaire précise des DSV, des outils analytiques innovant et des techniques de reconstruction moléculaire ont été utilisés dans ce travail. Un modèle cinétique de regroupement utilisant une représentation de type Langmuir-Hinshelwood a été développé pour l'hydrodésaromatisation, l'hydrodésulfuration et l'hydrodésazotation des DSV. Ce

  16. Comportement en vapocraquage de molécules modèles et de distillats sous vide hydrotraités. Deuxième partie : pyrolyse de molécules modèles représentatives des distillats sous vide bruts et hydrotraités Steam-Cracking Behavior of Model Molecules and Hydrotreated Vacuum Distillates Part Two: Pyrolysis of Model Molecules Representative of Unprocessed and Hydrotreated Vacuum Distillates

    Directory of Open Access Journals (Sweden)

    Freund E.

    2006-11-01

    Full Text Available La pyrolyse de molécules modèles a permis sur la base d'écarts de rendements obtenus entre le n -décane et leur mélange à 20 % avec celui-ci, l'établissement d'une échelle de potentialité de craquage présentée précédemment. L'approche des phénomènes de pyrolyse par des schémas réactionnels simplifiés est développée dans le présent article pour des molécules modèles, exemples de chaque grande famille susceptible de constituer le distillat sous vide : le perhydrophénanthrène pour les naphtènes lourds, l'octahydrophénanthrène symétrique pour les naphténoaromatiques, le naphtalène et l'alpha méthylnaphtalène pour les aromatiques méthylés ou non, le dodécylbenzène pour les aromatiques substitués par une longue chaîne aliphatique. Le cas de l'acénaphtylène a été examiné à part. On the basis of differences in yields obtained between n-decane and a 20% mixture of model molecules with n-decane, the pyrolysis of model molecules was used to determine a cracking potentiality scale that was previous described. The present article describes the approach to pyrolysis phenomena by simplified reaction mechanisms for model molecules taken from each major family liable to make up vacuum distillate, i. e. perhydrophenanthrene for heavy naphthenes, symmetrical octahydrophenanthrene for naphthenoaromatics, naphthalene and alpha-methynaphthalene for methylated or nonmethylated aromatics, dodecylbenzene for aromatics substituted for by a long aliphatic chain. The case of acenaphthylene is examined separately.

  17. Comportement en vapocraquage de molécules modèles et de distillats sous vide hydrotraités. Première partie : potentialité de craquage, réacteur à profil de température rectangulaire et à court temps de séjour Steam-Cracking Behavior of Model Molecules and Hydrotreated Vacuum Distillates

    Directory of Open Access Journals (Sweden)

    Berthelin M.

    2006-11-01

    Full Text Available Dans le cadre de la valorisation des coupes lourdes par vapocraquage, des distillats sous vide plus ou moins hydrotraités et des molécules modèles ont été pyrolysés. Cette étude a été réalisée sur un micropilote dont la partie réactionnelle est chauffée entre 680 et 860°C, par induction électromagnétique haute fréquence; le débit total peut varier de 60 à 800 g/h avec une perte de charge inférieure à 0,3 bar. Deux réacteurs tubulaires spiralés de rapport surface/volume allant jusqu'à 2000 m-1 permettent d'atteindre des temps de séjour de 10 à 400 millisecondes. Un indice quantifiant l'aptitude de chaque molécule à produire de l'éthylène, du propylène et des composés lourds, a permis l'établissement d'une échelle de potentialité de craquage, permettant d'orienter les performances d'un catalyseur de prétraitement : optimisation de la consommation d'hydrogène, meilleure valorisation des charges lourdes lors du vapocraquage. Grâce au profil de température rectangulaire du micropilote, des gains très importants de rendements d'éthylène et une production très faible d'asphaltènes ont été mis en évidence par pyrolyse de distillats sous vide hydrotraités. L'importance primordiale de la température dans le couple température-temps de séjour a été confirmée. Within the framework of the upgrading of heavy cuts for steam cracking, more or less hydrotreated vacuum distillates and model molecules were pyrolyzed. This research was done in a micropilot plant in which the reaction section was heated to between 680 and 860°C by high-frequency electromagnetic induction. The total flow rate can vary from 60 to 800 g/h with a pressure drop of less than 0. 3 bar. Two spiral tubular reactors with a high surface/volume ratio of up to 2000 m-1 enable residence times of 10 to 400 milliseconds to be obtained. An index quantifying the capacity of each molecule to produce ethylene, propylene and heavy compounds was used

  18. Change in physical and chemical characteristics related to the binomial time-temperature used in sous pasteurization see Tambaqui (Colossoma macropomum

    Directory of Open Access Journals (Sweden)

    H.C.A. Kato

    2016-02-01

    Full Text Available The goal of this study was to evaluate sous vide fish and assess the influence of time and temperature on the pasteurization process through quality parameters. The raw material (tambaqui fillets and the sous vide underwent physical, physicochemical, and microbiological analyses. A sauce was prepared containing soy sauce, water, horseradish and garlic flakes. The product's pasteurization parameters of time and temperature were defined according to a 22 central composite rotatable design (CCRD, and the dependent variables were water holding capacity (WHC and instrumental texture aiming at obtaining high WHC values for the product to maintain the desired juiciness. The microbiological analysis required by legislation have indicated that the fish fillets and sous vide were within de standard. The values of total coliforms found in the samples (fillets and sous vide analyzed were below the critical level of 10² CFU/g. The counts of sulphite-reducing clostridia and psychrotrophic and mesophilic bacteria on plates in the samples were <1x10 CFU/g. In conclusion, temperature was the most important factor in the pasteurization process, significantly contributing to the quality of the final product. The mathematical models proposed were considered predictive for each response.

  19. Purification by high vacuum fusion and progressive solidification of uranium from electrolytic origin; Purification par fusion sous vide eleve et solidification progressive d'uranium d'origine electrolytique

    Energy Technology Data Exchange (ETDEWEB)

    Poeydomenge, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-01-15

    grain observed, so-called secondary recrystallisation. in appendix, the method for measuring the electrical resistance by induction (with direct current)is studied from the fundamental and experimental point of view. The author applied it to the particular case of uranium for measuring the low-temperature resistance of the bars from the same which solidified first to the least pure ended the ingot. (author) [French] Dans le cadre de recherches generales sur la purification de l'uranium par fusion de zone, on a entrepris de determiner le degre de purification que l'on pourrait atteindre par une simple solidification progressive a vitesse et direction soigneusement controlees d'un uranium de purete nucleaire courante. Cet uranium de purete intermediaire fournirait un materiau de depart approprie au mode de purification ultime qu'est la fusion a zone verticale, dite ''flottante''. Dans ce but, des lingots d'uranium d'origine electrolytique ont ete refondus sous vide (2 a 5 x 10{sup -6} mm) dans une longue nacelle en UO{sub 2} apres une monte lente en temperature pour eliminer le maximum de gaz et d'impuretes volatiles. Ce degazage et cette volatilisation d'impuretes sont completes par maintien prolonge a haute temperature du bais liquide. Celui-ci est ensuite solidifie d'une extremite a l'autre de la nacelle par deplacement a vitesse lente et constante du front de solidification de facon a obtenir une repartition des impuretes selon les lois etablies par PFANN. Differentes methodes experimentales ont permis de montrer que le metal solidifie en premier lieu est nettement plus pur que celui de la partie solidifie a l'extremite opposee du lingot. Le degre de purification du metal en tete du lingot a ete apprecie, soit quantitativement par mesure du rapport des resistivites electriques a la temperature ambiante et a celle de l'azote liquide, soit qualitativement par l'examen de la structure micrographique et par l'etude de la recristallisation du metal. D'une part, le metal

  20. Etude par Spectrométrie de masse de la décomposition thermique sous vide de kérogènes appartenant à deux lignées évolutives distinctes Mass Spectrometry Investigation of the Vaccum Thermal Decomposition of Kerogens from Two Distinct Evolutive Lines

    Directory of Open Access Journals (Sweden)

    Souron C.

    2006-11-01

    Full Text Available Le but de cette étude est la connaissance qualitative et quantitative des composés dégagés lors de la décomposition thermique sous vide de quelques échantillons de kérogènes appartenant à deux lignées différentes. La principale technique utilisée est la spectrométrie de masse, appuyée sur des études préliminaires par thermogravi métrie et analyse élémentaire. Une adaptation particulière de l'appareillage et une mise au point de la méthode d'étalonnage permettent de doser les quatre composés minéraux les plus abondants et de donner une représentation des composés organiques. Cette étude montre que les composés formés au cours du chauffage comprennent, pour tous les kérogènes étudiés, des composés oxygénés et soufrés (CO, H2O, SH2, SOJ libérés principalement dans l'intervalle de température 200-400° C, et des composés hydrocarbonés, plus abondants, dans l'intervalle 300-500° C. On commente dans cet article l'origine supposée de ces composés; la formation de S02 au cours de la pyrolyse est particulièrement mal connue. On remarque que le rapport H2O/C02 peut être un critère de distinction des deux lignées de kérogènes étudiés. La distinction observée sur les produits hydrocarbonés nécessitera des recherches complémentaires pour être utilisée avec plus de sûreté. The aim of this investigation is to obtain a qualitative and quantitative understanding of the compounds given off during the vacuum thermal decomposition of several kerogen samples from two different lines. The main technique used is mass spectrometry, based on prior investigations by thermogravimetry and element onalysis. The equipment was specially adapted and a calibration method was developed for titrating the four most abundant minerai compounds and for representing the organic compounds. This investigation shows that the compounds formed during heating include, for oil the kerogens examined, oxygen-and sulfur

  1. Production durable de légumes sous-utilisés en vue d'améliorer la ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Production durable de légumes sous-utilisés en vue d'améliorer la sécurité alimentaire en milieu ruralrity (Les légumes indigènes revêtent une importance capitale pour les femmes pauvres vivant en milieu rural, mais ont reçu, à ce jour, peu d'attention de la part des milieux de la recherche, du développement et des ...

  2. Bases en technique du vide

    CERN Document Server

    Rommel, Guy

    2017-01-01

    Cette seconde édition, 20 ans après la première, devrait continuer à aider les techniciens pour la réalisation de leur système de vide. La technologie du vide est utilisée, à présent, dans de nombreux domaines très différents les uns des autres et avec des matériels très fiables. Or, elle est souvent bien peu étudiée, de plus, c'est une discipline où le savoir-faire prend tout son sens. Malheureusement la transmission par des ingénieurs et techniciens expérimentés ne se fait plus ou trop rapidement. La technologie du vide fait appel à la physique, à la chimie, à la mécanique, à la métallurgie, au dessin industriel, à l'électronique, à la thermique, etc. Cette discipline demande donc de maîtriser des techniques de domaines très divers, et ce n'est pas chose facile. Chaque installation est en soi un cas particulier avec ses besoins, sa façon de traiter les matériaux et celle d'utiliser les matériels. Les systèmes de vide sont parfois copiés d'un laboratoire à un autre et le...

  3. Advanced glycation end products, physico-chemical and sensory characteristics of cooked lamb loins affected by cooking method and addition of flavour precursors.

    Science.gov (United States)

    Roldan, Mar; Loebner, Jürgen; Degen, Julia; Henle, Thomas; Antequera, Teresa; Ruiz-Carrascal, Jorge

    2015-02-01

    The influence of the addition of a flavour enhancer solution (FES) (d-glucose, d-ribose, l-cysteine and thiamin) and of sous-vide cooking or roasting on moisture, cooking loss, instrumental colour, sensory characteristics and formation of Maillard reaction (MR) compounds in lamb loins was studied. FES reduced cooking loss and increased water content in sous-vide samples. FES and cooking method showed a marked effect on browning development, both on the meat surface and within. FES led to tougher and chewier texture in sous-vide cooked lamb, and enhanced flavour scores of sous-vide samples more markedly than in roasted ones. FES added meat showed higher contents of furosine; 1,2-dicarbonyl compounds and 5-hydroxymethylfurfural did not reach detectable levels. N-ε-carboxymethyllysine amounts were rather low and not influenced by the studied factors. Cooked meat seems to be a minor dietary source of MR products, regardless the presence of reducing sugars and the cooking method. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Du vide et de l'éternité

    CERN Document Server

    Cassé, Michel

    2014-01-01

    Gravité quantique, supersymétrie, univers multiples : la cosmologie et la physique quantique nous donnent aujourd hui de l'univers une image stupéfiante, à même de défier l'imagination la plus délirante. Conjuguant la puissance de la science et le souffle de la poésie, Michel Cassé parvient à nous rendre intelligibles les concepts les plus abstraits et les théories les plus ardues. Quand le vide quantique, sous sa plume, fleurit en particules élémentaires puis, en un clin d oeil cosmique (l « inflation »), se déploie en stupéfiants « plurivers », la physique et la cosmologie s éclairent du bonheur de l écriture.

  5. VIDE: The Void IDentification and Examination toolkit

    Science.gov (United States)

    Sutter, P. M.; Lavaux, G.; Hamaus, N.; Pisani, A.; Wandelt, B. D.; Warren, M.; Villaescusa-Navarro, F.; Zivick, P.; Mao, Q.; Thompson, B. B.

    2015-03-01

    We present VIDE, the Void IDentification and Examination toolkit, an open-source Python/C++ code for finding cosmic voids in galaxy redshift surveys and N-body simulations, characterizing their properties, and providing a platform for more detailed analysis. At its core, VIDE uses a substantially enhanced version of ZOBOV (Neyinck 2008) to calculate a Voronoi tessellation for estimating the density field and performing a watershed transform to construct voids. Additionally, VIDE provides significant functionality for both pre- and post-processing: for example, VIDE can work with volume- or magnitude-limited galaxy samples with arbitrary survey geometries, or dark matter particles or halo catalogs in a variety of common formats. It can also randomly subsample inputs and includes a Halo Occupation Distribution model for constructing mock galaxy populations. VIDE uses the watershed levels to place voids in a hierarchical tree, outputs a summary of void properties in plain ASCII, and provides a Python API to perform many analysis tasks, such as loading and manipulating void catalogs and particle members, filtering, plotting, computing clustering statistics, stacking, comparing catalogs, and fitting density profiles. While centered around ZOBOV, the toolkit is designed to be as modular as possible and accommodate other void finders. VIDE has been in development for several years and has already been used to produce a wealth of results, which we summarize in this work to highlight the capabilities of the toolkit. VIDE is publicly available at http://bitbucket.org/cosmicvoids/vide_public and http://www.cosmicvoids.net.

  6. Advanced glycation end products, physico-chemical and sensory characteristics of cooked lamb loins affected by cooking method and addition of flavour precursors

    DEFF Research Database (Denmark)

    Roldan, Mar; Loebner, Jürgen; Degen, Julia

    2015-01-01

    The influence of the addition of a flavour enhancer solution (FES) (d-glucose, d-ribose, l-cysteine and thiamin) and of sous-vide cooking or roasting on moisture, cooking loss, instrumental colour, sensory characteristics and formation of Maillard reaction (MR) compounds in lamb loins was studied....... FES reduced cooking loss and increased water content in sous-vide samples. FES and cooking method showed a marked effect on browning development, both on the meat surface and within. FES led to tougher and chewier texture in sous-vide cooked lamb, and enhanced flavour scores of sous-vide samples more...

  7. Methodes de decomposition pour la planification a moyen terme de la production hydroelectrique sous incertitude

    Science.gov (United States)

    Carpentier, Pierre-Luc

    In this thesis, we consider the midterm production planning problem (MTPP) of hydroelectricity generation under uncertainty. The aim of this problem is to manage a set of interconnected hydroelectric reservoirs over several months. We are particularly interested in high dimensional reservoir systems that are operated by large hydroelectricity producers such as Hydro-Quebec. The aim of this thesis is to develop and evaluate different decomposition methods for solving the MTPP under uncertainty. This thesis is divided in three articles. The first article demonstrates the applicability of the progressive hedging algorithm (PHA), a scenario decomposition method, for managing hydroelectric reservoirs with multiannual storage capacity under highly variable operating conditions in Canada. The PHA is a classical stochastic optimization method designed to solve general multistage stochastic programs defined on a scenario tree. This method works by applying an augmented Lagrangian relaxation on non-anticipativity constraints (NACs) of the stochastic program. At each iteration of the PHA, a sequence of subproblems must be solved. Each subproblem corresponds to a deterministic version of the original stochastic program for a particular scenario in the scenario tree. Linear and a quadratic terms must be included in subproblem's objective functions to penalize any violation of NACs. An important limitation of the PHA is due to the fact that the number of subproblems to be solved and the number of penalty terms increase exponentially with the branching level in the tree. This phenomenon can make the application of the PHA particularly difficult when the scenario tree covers several tens of time periods. Another important limitation of the PHA is caused by the fact that the difficulty level of NACs generally increases as the variability of scenarios increases. Consequently, applying the PHA becomes particularly challenging in hydroclimatic regions that are characterized by a high

  8. Prediction under Uncertainty on a Mature Field Prévision de production sous incertitude pour un champ mature

    Directory of Open Access Journals (Sweden)

    Feraille M.

    2012-04-01

    uses Gaussian process modeling and an adaptive design strategy. In the final step of the workflow, parametric response surfaces are used to approximate the reservoir production forecasts and obtain their probabilistic distribution by propagating the remaining posterior uncertainty of input parameters. Dans le cadre de l’ingénierie de réservoir, des simulateurs permettent de comprendre et prédire le déplacement des fluides dans le réservoir et ainsi d’optimiser son exploitation. Ces simulateurs prennent en entrée un grand nombre de paramètres qui peuvent être entachés d’incertitudes. Afin d’assurer une production future correcte, la comparaison des différents scénarios d’exploitation possibles doit tenir compte de ces incertitudes. Les prévisions de production ne doivent pas être évaluées en ne considérant qu’un seul cas « moyen » pour chaque scénario mais en intégrant l’incertitude sur les paramètres d’entrée. Dans le cadre de champ mature où un historique de production est disponible, le formalisme Bayésien est bien adapté pour répondre au problème des prédictions sous incertitudes. En effet, il permet de définir les incertitudes, dites a posteriori, sur les entrées du modèle de réservoir en prenant en compte à la fois les données statiques et dynamiques. Ces incertitudes a posteriori peuvent ensuite être propagées afin de calculer des prévisions de production probabilistes pour chaque scénario, tout en respectant la connaissance statique et dynamique du réservoir. Mais l’obtention des incertitudes a posteriori ainsi que la propagation de celles-ci sur les prévisions de production nécessitent un nombre souvent prohibitif de simulations du modèle réservoir. Dans cet article, nous proposons une application de plusieurs techniques statistiques avancées afin de prendre en compte les incertitudes dans les prévisions de production pour un champ mature et ce en utilisant un nombre raisonnable de simulations. Le

  9. Thermal inactivation of Listeria monocytogenes and Salmonella spp. in sous-vide processed marinated chicken breast

    Science.gov (United States)

    The heat resistance of a cocktail of five Salmonella strains and five L. monocytogenes strains was determined in teriyaki-marinated chicken breasts. Inoculated meat, packaged in bags, were completely immersed in a circulating water bath and cooked to a final temperature of 55, 57.5 or 60C in one h...

  10. Tratamiento sous vide: cocción al vacio de pechuga de pollo

    OpenAIRE

    Rocca, Rocío

    2010-01-01

    Esta tesis investiga las variaciones cuantitativas en el contenido de tiamina, riboflavina, niacina, sodio, calcio, hierro, fósforo y potasio en pechuga de pollo cocida al vacío y cocida en forma tradicional, considerando tradicional al método hervido; y conjuntamente valora el grado de aceptación general y de las características organolépticas de ambas preparaciones. Para conocer el contenido vitamínico y mineral del alimento, luego de sometido a ambas cocciones, se realiza...

  11. Le vide univers du tout et du rien

    CERN Document Server

    Diner, Simon

    1997-01-01

    Pourquoi l'Univers plutôt que le vide ? Le temps et l'espace existent-ils en l'absence de l'Univers ? Que reste-t-il quand tout est enlevé ? Pourquoi quelque chose plutôt que rien ? Depuis des siècles, ces interrogations mobilisent philosophes et physiciens. Mais aujourd'hui, le vide n'est pas le rien. Il serait même l'acteur central de l'histoire de la matière et de l'Univers, le partenaire privilégié de la physique. Vide et matière ne sont plus deux manifestations séparées de la nature, mais deux aspects d'une même réalité. Le vide est l'état de base dont la matière émerge, sans couper son cordon ombilical Le vide comme Univers du rien cède la place au vide comme Univers du tout. Que le vide puisse être conçu par les physiciens comme réservoir potentiel d'univers, voici qui ne devrait laisser personne indifférent. Ce livre ouvre un débat et nous convie à une réflexion surprenante.

  12. Effet de pratiques de fertilisation azotée sur la sensibilité d’une culture de tomate à l’oïdium et la pourriture grise en conditions de production sous serre.

    OpenAIRE

    Ozayou, Saddik

    2011-01-01

    L’azote est le principal élément nutritif utilisé pour le contrôle des maladies aériennes sous abris. Dans ce stage, nous avons étudié l’effet de trois régimes de fertilisation azotée (4 mmoles/L, 8 mmoles/L et 16 mmoles/L) sur la physiologie de la plante et la sensibilité de la tomate à l’Oidium neolycopersici et à Botrytis cinerea en conditions de production sous serre. Pour ce faire, nous avons inoculé différents organes aériens des plantes dans la serre ou au laboratoire de l’INRA d’Alény...

  13. Studies in Petroleum Composition the Distribution of Nitrogen Species, Metals and Coke Precursors During High Vacuum Distillation of Petroleum Étude de composition du pétrole Répartition des espèces azotées, des métaux et des précurseurs du coke pendant la distillation sous vide poussé du pétrole

    Directory of Open Access Journals (Sweden)

    Long R. B.

    2006-11-01

    Full Text Available Application of separation techniques to residua and other heavy feedstocks raises the issue of the most appropriate distillation cut-point for the maximum yield of useful (gas-oil type liquids. This publication addresses this specific issue and describes the influence of deepdistillation (to 1289°F+ on the composition and quality of the volatiles/nonvolatiles from a 950°F+ residuum. The techniques employed to estimate the composition/quality of the 950-1289°F and 1289°F+ fractions are deasphalting and clay-adsorption separation of each whole fraction. The data show that further distillation of the 950°F+ residuum can recover essentially all of the saturate content of the feed in the overhead product at 1289°F atmos. equiv. cut point. However, appreciable amounts of oxygen- and nitrogen-containing polar compounds are also taken overhead leading to a carbon residue value for the distillate of 8. 2 wt%. The metals and the coke precursors in the distillate lie mainly in the polar fraction along with the nitrogen compounds. However, at these high molecular weights the distillate also shows coke precursors in the saturate fraction and more extensively in the aromatic fraction. Distillation is an impurity (carbon precursors, heteroatoms, metals concentrating process. As the cut-point increases, the impurity content of the distillate increases but to a lesser extent than that of the corresponding residuum. L'application des techniques de séparation aux résidus et autres matières lourdes conduit à s'interroger sur le point de coupe de distillation adéquat qui va permettre d'obtenir le rendement maximum en liquides utiles (type gazole. Il faut reconnaître que la distillation est un processus de concentration des impuretés (produits de tête, hétéroatomes, métaux. Lorsque le point de coupe s'élève, le contenu en impuretés du distillat augmente, mais il augmente moins que celui du résidu correspondant. La présente publication

  14. Production durable de légumes sous-utilisés en vue d'améliorer la ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Manitoba universities and project partners awarded $6.4-Million from Canadian International Food Security Research Fund for international research. Download PDF. Reports. Sustainable Production and Utilization of Underutilized Nigerian Vegetables to Enhance Rural Food Security : Final Technical Report (March 2011 ...

  15. Caractéristiques physiques de la production du melon cantaloup Cucumis melo L., cultivé sous serre

    Directory of Open Access Journals (Sweden)

    Hannachi, C.

    1994-01-01

    Full Text Available Physical Characteristics Of Muskmelon Production, Cucumis melo L., Cultivated Under Greenhouse- Tunisia. Seven varieties of cantaloup muskmelon (Pancha, Sugdor, Supersprint, F^6802, Gallicum, Polidor, Pallas were cultivated in plastic house and tested for yield and fruit quality (fruit weight, index of refraction, thickness of flesh. Supersprint, Pancha and Sugdor were the more productive varieties. Their early yield represents 61 %, 62 %> and 53 %> of total yield : 4, 2 ; 5, 2 and 5, 7 kg/m2 respectively. Fruits had a commercial weight of more than 500 g and an acceptable gustative quality ; IR> 10. Fruit weight was positively correlated with viable seed number (pancha : IR was appreciated for Pancha, Sugdor and F^802 (IR> 12. The flesh of these three varieties was well developped, and it was probably influenced by the important seed number (523-610 seeds/fruit. It was 3 cm wide and 6 times as thick as the cortex (0, 5 cm. Pancha was significantly distinguished from others by the fruit number (6 fruits/plant. The introduction of honey bees may improve pollination of flowers and allowed to exploit better its potentialities.

  16. Clichy-sous-Bois (France) operation

    Energy Technology Data Exchange (ETDEWEB)

    Dechamp, A

    1984-09-01

    The geothermal plant of Clichy-sous-Bois has been operating for 2 years and covers the needs of 3,400 equivalent-dwellings, including a sport-hall, 2 schools, the town-hall and 7 low-cost groups of flats. Geothermal energy covers 65% of the energy yearly global consumption for heating and sanitary hot water, i.e. 35,151 MWh. Thus, 3,195 TOE are saved each year. In December, 1979, the town of Clichy-sous-bois delegated their sponsorship to the Societe d'equipement et d'amenagement du territoire du departement de la Seine-Saint-Denis - SODETAT 93 for the realization of the geothermal operation. The production and injection wells were drilled between July and September, 1981. The Dogger aquifer was encountered at 1,800 m deep, with a temperature of 70,8/sup 0/C and an exploitation yield of 200m/sup 3//h. Surface works started in March 1982 and were completed in November of the same year. Apart from the geothermal power plant, the network comprises 11 exchange substations and a distribution network of 2,700 m long with 7,000 m of underground pipes. This plant is exploited by the Compagnie francaise d'exploitation thermique (COFRETH) within the framework of a farmout contract for 20 years, including: production, transportation and public distribution of geothermal heat all over the city of Clichy-sous-Bois.

  17. Le cerveau sous effet placebo

    OpenAIRE

    Touzet , Claude

    2017-01-01

    International audience; Comment le fait de croire qu’on nous injecte de la morphine (alors qu’il s’agit de sérum physiologique) peut-il faire disparaître la douleur ? Investigation sur le cerveau sous placebo.

  18. Deep geothermal energy: the Soultz-sous-Forets experience

    International Nuclear Information System (INIS)

    Genter, A.; Guenot, N.; Graff, J.J.

    2010-01-01

    This paper presents the mining exploitation project of the geothermal heat at Soultz-sous-Forets, located 50 km NE of Strasbourg (Bas Rhin, France). A geothermal power plant, inaugurated mid-2008, will commercialize its own power generation soon. This power plant is owned by a consortium of French-German industrialists through the European economical interest group for the mining exploitation of heat. The paper presents the geological characteristics of the hot dry rock geothermal reservoir, the deep geothermal wells, the hydraulic stimulation of the reservoir rock, the surface equipments of the power plants and the production pumps, the activities of the site in 2008 and 2009 and the perspectives of development of this energy source in France in the light of the Soultz-sous-Forets site experience. (J.S.)

  19. Successful collection of peripheral blood stem cells upon VIDE chemomobilization in sarcoma patients.

    Science.gov (United States)

    Kriegsmann, Katharina; Heilig, Christoph; Cremer, Martin; Novotny, Philipp; Kriegsmann, Mark; Bruckner, Thomas; Müller-Tidow, Carsten; Egerer, Gerlinde; Wuchter, Patrick

    2017-11-01

    In patients with Ewing sarcoma and some distinct subgroups of soft tissue sarcoma (STS), a quantitatively sufficient autologous peripheral blood stem cell (PBSC) collection for stem cell support might facilitate treatment continuation, dose-intensification, and high-dose chemotherapy. Here, we provide a detailed evaluation of PBSC collection upon vincristine, ifosfamide, doxorubicin, and etoposide (VIDE) chemomobilization. Mobilization and collection parameters of 42 sarcoma patients (Ewing sarcoma n = 35, other STS n = 7) were analyzed retrospectively. Data were evaluated with regard to the number of previous VIDE therapy cycles. All patients reached the collection goal of ≥2.0 × 10 6 CD34 + cells/kg body weight (bw) upon VIDE/G-CSF mobilization, in the majority of cases with one single leukapheresis (LP) session (n = 29, 69%). No significant differences were identified with regard to mobilization and collection variables or the number of previous induction VIDE therapy cycles. However, upon 5 cycles of VIDE, we found the highest relative proportion of patients who required two or three LP sessions. Our data demonstrate the feasibility of successful PBSC collection upon VIDE chemomobilization even after up to five cycles of induction therapy, while at the same time the increasing risk of bone marrow exhaustion with every consecutive cycle is outlined. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  20. "Quelque part {u00E1 un tournant du destin..." ; "Ciel vide, bőte aux lettres vide, chemin vide..." ; "Singe indécis..." ; Ithaque / Tõnu Õnnepalu ; trad. par Antoine Chalvin avec le concours de l'auteur

    Index Scriptorium Estoniae

    Õnnepalu, Tõnu

    1992-01-01

    Orig.: "Kusagil saatuse käänakul..." ; "Tühi taevas, tühi postkast, tühi kruusatee..." ; "Otsustusvõimetu ahv..." ; Ithaka. Sisu: "Quelque part {u00E1 un tournant du destin..." ; "Ciel vide, bőte aux lettres vide, chemin vide..." ; "Singe indécis..." ; Ithaque. T. Õnnepalust lk. 93. Kadriann Soosaare illustratsioon lk. 97

  1. SOUS LES PAVÉS: LA PLAGE!

    DEFF Research Database (Denmark)

    Clemmensen, Thomas Juel

    2017-01-01

    kunstnerbevægelse situationisterne brugte parolen sous les pavés: la plage! blev stranden associeret med det frie naturlige rum i kontrast til den brolagte gade, der repræsenterede samfundets undertrykkende orden. Men udtrykket kan samtidig minde os om geologiens allestedsnærværende karakter. Geologien findes lige...

  2. Predicting outgrowth and inactivation of Clostridium perfringens in meat products during low temperature long time heat treatment

    DEFF Research Database (Denmark)

    Duan, Zhi; Holst Hansen, Terese; Hansen, Tina Beck

    OBJECTIVE Sous-vide cooking and molecular gastronomy has started a wave of experimenting with Low Temperature Long Time (LTLT) heat treatments. Heat treatments, at temperatures as low as 50°C, have been suggested by celebrity chefs. LTLT treatments often take hours to reach to the final core...

  3. Oligo cyclic plastic fatigue of Zircaloy-4 under vacuum and in iodinated methanol; Fatigue plastique oligocyclique du Zircaloy-4 sous vide et dans le methanol iode

    Energy Technology Data Exchange (ETDEWEB)

    Beloucif, A.

    1995-01-01

    Our study was bound to the Zircaloy-4 fuel can damage in PWR type reactors. The topic was the damage mechanisms of Zircaloy-4 by oligo-cyclic plastic fatigue in inert atmosphere and in iodinated methanol. The oligo-cyclic plastic fatigue tests, under vacuum, were performed with steady plastic deformation and deformation speed. The corrosion fatigue tests in iodinated methanol put to the fore one obvious harmful part of iodine on Zircaloy-4 resistance to cyclic solicitations. The observations proved the existence of a very strong synergic effect between cyclic mechanical damage and corrosion. (MML). 84 refs., 117 figs., 3 tabs.

  4. Radiculoplexopathie, anticorps anti Yo et cancer ovarien sous ...

    African Journals Online (AJOL)

    Les radiculo-plexopathies au cours des cancers sont le plus souvent d'origine métastatique. Leur origine dysimmune est rare. Nous rapportons un cas de radiculoplexopathie d'évolution favorable sous traitement immunomodulateur, survenue chez une patiente porteuse d'un carcinome ovarien bilatéral sous ...

  5. Paisagem material, paisagem simbólica e identidade no concelho de Castelo de Vide Material landscape, symbolic landscape, and identity in the municipality of Castelo de Vide

    Directory of Open Access Journals (Sweden)

    Júlia Carolino

    2011-01-01

    Full Text Available O artigo incide sobre a relação entre paisagem e identidade social no contexto da presente transformação e reinvenção do espaço rural. Discutem-se os resultados e a metodologia de um estudo multidisciplinar que mobilizou conhecimentos tanto da antropologia como da geografia. Com base numa tipologia da paisagem e em narrativas pessoais e do lugar, equaciona-se o papel da paisagem como operador simbólico na produção de identidades locais em Castelo de Vide (Norte alentejano. Identificam-se e descrevem-se os eixos de diferenciação simultaneamente espacial e social que consubstanciam, neste caso, a relação dinâmica entre paisagem e identidade local.This article addresses the impact of landscape and social identity on contemporary transformations and the reinvention of rural space in Castelo de Vide (North Alentejo region, Portugal. We describe a multidisciplinary research method combining anthropology and geography, and present the findings obtained. Combining a landscape typology with personal narratives of place - social-cum-spatial differentiation - allows us to explore relationships between landscape and local identity as a dynamic process in the region.

  6. Lipoblastome de la fosse sous temporale

    Science.gov (United States)

    Najib, Jaafar; Aniba, Khalid; Laghmari, Mehdi; Lmejjati, Mohammed; Ghannane, Houssine; Benali, Said Ait; Ennadam, Hind; Mrabti, Hind; Idrissi, Nadia Cherif

    2014-01-01

    Le lipoblastome est une tumeur bénigne rare, formée d'adypocytes immatures associés à la présence d'une matrice myxoide, de septas fibreux, et d'une architecture lobulaire. Il survient généralement chez le nourrisson et l'enfant. Cette tumeur touche dans la majorité des cas les tissus sous-cutanés des extrémités et du tronc. Elle est extrèmement rare au niveau de la tète et du cou. Un total de moins de 100 cas a été rapporté précédemment dans la littérature. PMID:25918563

  7. STUDY CONCERNING THE PRODUCTION OF BIOMASS PROTEIN BY VALORISATION OF BY-PRODUCTS FROM THE DAIRY INDUSTRY ETUDE CONCERNANT L’OBTENTION DE BIOMASSE PROTEIQUE PAR VALORISATION DES SOUS-PRODUITS DE L’INDUSTRIE LAITIERE

    Directory of Open Access Journals (Sweden)

    LUMINITA GROSU

    2015-07-01

    Full Text Available The development of the food industry ensures the necessary protein for the population and in this perspective the valorisation of by-products from the dairy industry (whey and buttermilk can be a solution in this direction. Whey is a very important substrate for the biosynthesis of single cell protein by its lactose content which is the main source of fermentable substrate for yeasts. As part of our research, the biomass protein was obtained using whey as source of lactose and other sugars and yeast strains of Candida utilis. The modelling program used is 2nd order system centred with three variables: amount of sugar, amount of nitrogen and quantity of phosphorus. The following parameters have been pursued: biomass content, yield of sugar consumption and protein content. The process conditions are influenced by the addition of different nutrients.

  8. Mārketinga vides faktori un to ietekme uz uzņēmuma darbību

    OpenAIRE

    Čačika, Anastasija

    2012-01-01

    Bakalaura darba nosaukums ir „Mārketinga vides faktori un to ietekme uz uzņēmuma darbību”. Bakalaura darba mērķis ir veikt mārketinga vides analīzi, kā arī novērtēt iekšējas un ārējas mārketinga vides ietekmi uz „Ave Trans Group” uzņēmuma darbību. Darbā tiek apskatīti mārketinga vides teorētiskie aspekti, kā arī holdinga kompānijas „Ave Trans Group” mārketinga vidi ietekmējošie faktori, un ir piedāvāta dotā uzņēmuma mārketinga vides analīze, kā arī veikta anketēšana un anketu analīze. ...

  9. La base sous-marine de Bordeaux, sous le béton la culture

    Directory of Open Access Journals (Sweden)

    Mathieu Marsan

    2012-06-01

    Full Text Available Active à peine plus d’un an pendant l’Occupation, la base sous-marine de Bordeaux cristallise encore les souvenirs douloureux des heures sombres du Port de la Lune. Le bunker attire pourtant depuis les années 1960 des artistes, cinéastes, plasticiens et musiciens fascinés par l’esprit du lieu. Institutionnalisée au début des années 1990, la base sous-marine devient un espace dédié au nautisme avant d’être consacrée à l’art contemporain au début du XXIe siècle. Aujourd’hui au cœur du projet d’aménagement des bassins à flot du quartier de Bacalan, la base sous-marine questionne et intrigue ses visiteurs sur son passé, mais aussi – et surtout – sur son avenir.Build during the German occupation, the submarine base of Bordeaux active during hardly more than a year still crystallizes the painful memories of the dark hours of the « Port de la Lune ». Nevertheless, the bunker attracts artists, film-makers, visual artists and musicians fascinated by the spirit of the place since the 1960’s. Institutionalized at the beginning of 1990’s, the submarine base became a space dedicated to the yachting before contemporary art at the beginning of the XXIth century. Nowadays at the heart of the project of redevelopment of the wet docks in the urban area of Bacalan, the submarine base questions and intrigues its visitors on its past, but also – and especially – on its future.

  10. Radiation Treatment of Meat Products and Animal By-Products; Traitement par Rayonnements des Viandes et Derives et des Sous-Produits Animaux; Radiatsionnaya obrabotka myasnykh produktov i subproduktov zhivotnogo proiskhozhdeniya; Irradiacion de la Carne y sus Derivados

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, P. -I.E. [Danish Meat Research Institute, Roskilde (Denmark)

    1966-11-15

    Application of radiation in food technology can only be considered as an alternative to existing preservation methods when a higher quality product and/or a cheaper product will result, or in cases where no alternative methods exist. With this view in mind, work performed at the Danish Meat Research Institute on sliced bacon, canned hams, luncheon meat, and animal feeding stuffs, i.e. meat and bone meal and blood meal, is reviewed and discussed. The conclusion drawn from the experimental results is that the formation of off-flavours in irradiated meat products is a very serious problem and the most important obstacle to a successful application of irradiation in meat processing. It is, therefore, essential that future research should concentrate on finding means to reduce the irradiation flavour. A number of approaches to solve this problem are mentioned and the Danish work in this field which has been centred mainly on the use of very high dose-rates and of non-equal dose distribution in cans is reviewed, and the concepts briefly described. (author) [French] L'application des rayonnements dans l'industrie alimentaire ne saurait etre consideree en remplacement des methodes de conservation actuelles que s'il en resulte un produit de qualite superieure ou un produit meilleur marche, ou encore lorsqu'on ne peut utiliser aucune methode de rechange. Dans cet esprit, l'auteur examine et commente les travaux accomplis par l'Institut danois de recherches sur la viande concernant le lard en tranches, le jambon en conserve, les pates de viande en conserve (luncheon meat) et les aliments pour animaux, c'est-a-dire les farines de viande et d'os et la farine de sang. Il conclut des resultats experimentaux que la formation de gouts indesirables dans les viandes irradiees pose un probleme tres serieux et constitue l'obstacle le plus important au succes de l'application des rayonnements a la preparation des viandes. Il importe donc que les futures recherches portent avant tout sur

  11. Fertilité des sols agricoles sous vigne et sous blé de la région de ...

    African Journals Online (AJOL)

    L'objectif de ce travail est l'évaluation agronomique de la qualité du sol sous vigne et sous blé dans la région Mohammedia-Benslimane au Maroc, à travers les indicateurs chimiques de la qualité du sol (pH, CE, CaCO3, Carbone organique total, Azote, Phosphore et Potassium). Les résultats de cette étude montrent que ...

  12. Electron bombardment fusion and continuous casting of uranium carbide. Fundamental study of the metallurgical and thermal processes; Fusion sous bombardement d'electrons et coulee continue de carbure d'uranium. Etude fondamentale des processus metallurgiques et thermiques

    Energy Technology Data Exchange (ETDEWEB)

    Trouve, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-02-01

    During a pilot production run, about 1.200 kg of uranium carbide cylindrical rods were prepared by electron bombardment fusion and continuous casting in an apparatus making it possible to operate in a constant vacuum automatically. In order to make the most of the fusion technique used, it was necessary to resolve a certain number of problems involved in this production. It was found that the energy yield for the electron bombardment heating using accelerating voltages of about 10 kV was 100 per cent; about 40 per cent of the electrons are re-emitted by back-scattering. These electrons leave the surface with practically zero energy. The fusion technique leads to the elimination of the majority of the metallic impurities. In order to explain the variations in the non-metallic impurity contents the different reactions occurring in the molten uranium monocarbide have been determined. A micrographic study of the rods obtained has shown various types of crystallization depending on the rate of casting and, despite the uniaxial symmetry of the cooling, no texture has been observed, whatever the rate of fusion employed. The aspects of the fracture surfaces observed on certain rods can be explained by theory in the domain where the material is elastic. Furthermore it has been shown that a decrease in the brittleness occurs as a result of the formation of fine precipitates of the Wiedmanstatten structure type. (authors) [French] Au cours d'une fabrication pilote, environ 1 200 kg de barreaux cylindriques de carbure d'uranium ont ete prepares par fusion sous bombardement d'electrons et coulee continue dans un appareillage permettant d'operer d'une maniere automatique sous vide constant. Afin de tirer le meilleur parti possible de la technique de fusion utilisee, il importait de repondre a un certain nombre de questions soulevees par cette fabrication. Le rendement energetique du chauffage par bombardement d'electrons pour des tensions acceleratrices de l'ordre de 10 kV a ete

  13. Caractéristiques de la croissance et de la production en fruits chez trois variétés de piment (Capsicum annuum L. sous stress salin

    Directory of Open Access Journals (Sweden)

    Ibn Maaouia-Houimli, S.

    2011-01-01

    Full Text Available Characteristics of the Growth and Fruits Production of Three Pepper Varieties Capsicum annuum L. under Saline Stress. This work aims to evaluate the salt tolerance of three pepper varieties differing by their precocity: pm797 early variety, beldi semi-early and baklouti late variety. The trials were carried out in pots under glazed greenhouse. The results showed that salinity reduced the growth and production. However, a varietal difference response to salt stress was observed between the studied varieties. Indeed, the varieties beldi and baklouti are characterized by their vigour in absence as in the presence of salt. On the other hand, early variety PM797 is characterized by the stability of production. This is highlighting the utility of early characters in salinity tolerance.

  14. Plate forme L3 informatique sous application android

    OpenAIRE

    BENDEDDOUCHE, Rida; BENAMARA, Mohammed El Amin

    2014-01-01

    Ce travail est présenté dans le cadre de notre projet de fin d’étude licence en informatique. Nous sommes actuellement dans une étape de transition de l’informatique fixe à l’informatique mobile. De jour en jour l’optimisation des smartphones ne cesse d’augmenter et cela grâce aux applications mobiles. Les smartphones utilisent plusieurs systèmes d’exploitation, une grande partie est sous Android. Les Smartphones et tablettes ont été conçus pour faciliter la vie quotidienne. En partant de ce ...

  15. Composes inter-halogenes sous pression: etude des transformations structurales dans le monobromure d'iode sous forme dense

    Science.gov (United States)

    Bouchard, Alexandre

    La famille des composes halogenes et inter-halogenes representent des solides moleculaires adoptant des phases denses communes avec des solides moleculaires diatomiques comme l'azote et l'hydrogene. Parmi les transformations structurales et electroniques induites sous haute pression et observees dans ces solides, on note, entre autres, la dissociation moleculaire et la metallisation. De plus, l'etude des phases denses de l'iode a permis recemment l'observation d'une structure cristalline possedant une modulation dite incommensurable, c'est-a-dire une modulation possedant une periodicite differente de celle de la structure cristalline, jetant ainsi une lumiere nouvelle sur le processus de dissociation moleculaire dans les solides halogenes. Dans ce memoire, on propose d'etudier les changements structuraux dans monobromure d'iode (IBr), un compose inter-halogene possedant des proprietes structurales semblables a celles de deux composes halogenes, soit l'iode (I 2) et le brome (Br2) sous leur forme solide. Des experiences de diffraction des rayons X de poudres en utilisant un rayonnement synchrotron ont ete realisees a temperature ambiante sur l'IBr en variant la pression jusqu'aux environs de 60 GPa. La nature chimique particuliere du compose IBr a necessite la mise au point de techniques de chargement d'echantillon destinees a preserver l'integrite chimique de la substance utilisee. On rapporte egalement l'observation d'une phase de l'IBr presentant une modulation incommensurable. Les phases observees dans l'IBr permettent d'etablir des paralleles avec les phases denses rapportees dans I2 et Br2 par le biais d'un modele phenomenologique decrivant la sequence structurale des solides halogenes sous forme condensee.

  16. Le harcèlement organisationnel des relations sous emprise

    CERN Document Server

    Guhel, Cécile

    2014-01-01

    Le lien entre harcèlement et emprise professionnelle est bien réel. Il est aussi puissant que destructeur. L'aide extérieure est importante mais la prise de conscience du sujet et sa mise à distance sont primordiales pour le retour à Soi. Un facteur de risque organisationnel est un facteur qui relève de l'organisation et qui comporte le risque ou la probabilité qu'un tel comportement abusif voie le jour et qu'il ait des effets négatifs. Un tel facteur peut également contribuer à la persistance ou à l'aggravation du comportement. En abordant la relation d'emprise sous l'éclairage de différentes théories psychologiques, cela vous permettra d'observer les mécanismes intrapsychiques conscients et inconscients qui sous-tendent les comportements de l'instigateur de la relation d'emprise d'une part, et de sa victime d'autre part. Enfin, à travers trois témoignages, de salariées en poste, vous découvrirez combien la parole sur le travail est importante dans la prise de conscience du processus de de...

  17. Effects of using multi-vide ruler kit in the acquisition of numeracy skills among PROTIM students

    Science.gov (United States)

    Arumugan, Hemalatha A./P.; Obeng, Sharifah Nasriah Wan; Talib, Corrienna Abdul; Bunyamin, Muhammad Abdul Hadi; Ali, Marlina; Ibrahim, Norhasniza; Zawadzki, Rainer

    2017-08-01

    One effective way to teach arithmetic more interestingly and make it easier to learn is through the use of instructional materials. These can help students master certain mathematical skills, particularly multiplication and division, often considered difficult amongst primary school pupils. Nevertheless, the insufficiency of appropriate instructional materials causes difficulty in understanding how to use the proper technique or apply the concept, especially in multiplication. With this in mind, this study investigated whether the innovative and creative instructional material designed to assist and enhance numeracy skills, namely the Multi-vide Ruler kit, could increase students' ability in solving multiplication and division questions and whether it affected their interest in solving numeracy problems. Participants in this study included ten PROTIM (Program Tiga M [Three M Program] - membaca [reading], menulis [writing] dan mengira [calculate]) students, 9-10 years old, who had difficulties in reading, writing and arithmetic. In order to get appropriate support for qualitative research, a pre and post-test containing ten basic mathematical operations, was implemented together with the Multi-vide Ruler Kit. The findings of the qualitative case study, with the pre and post-tests, showed significant differences in their achievement and interest in two-digit multiplication and division operations. The results suggest that this approach could improve PROTIM student's ability to solve basic mathematical operations. What was most encouraging was the increase in students' interest in solving numeracy problems.

  18. Experimental study of metal gasketed joints for ultra-high vacuums; Etude experimentale de joints metalliques pour ultra-vide

    Energy Technology Data Exchange (ETDEWEB)

    Boulloud, J. P.; Schweitzer, J. [Commissariat a l' energie atomique et aux energies alternatives - CEA, Service de Physique Appliquee, groupe de Vide, Centre d' Etudes Nucleaires de Saclay (France)

    1960-07-01

    Various type of leak-tight metal joints have been studied with their application in assemblies containing total vacuums in mind. Their integrity has been tested with a helium leak detector, and leaks of about 2 x 10{sup -12} cm{sup 3} Atm/s per meter of joint have been measured, simultaneously with the clamping effort applied at the joint and the deformation of the metal gasket. The integrity to clamping effort ratio curve is not retraced in reverse upon relaxation of the clamping effort, but a 'return curve' analogous to a hysteresis cycle explains why certain types of joint retain their integrity at high temperatures. The use of a tracer gas permits discrimination between external permeation of the joint and gas from occlusions between its mating surfaces. The authors have been led to consider that neither the nature nor the purity or surface condition of the joint have any basic influence on its integrity. Clamping effort values in respect of various joints and necessary for total integrity are indicated. Reprint of a paper published in Le vide, no. 82, Jul-Aug 1959 [French] L'etude de differents types de joints metalliques etanches, en vue de leur application a l'ultra-vide, a ete effectuee a l'aide d'un detecteur de fuite a helium. On a mesure simultanement le debit de fuite, l'effort applique sur le joint et sa deformation. On a reussi a mesurer des debits de fuite de l'ordre de 2 x 10{sup -12} cm{sup 3} Atm/s/m de joint pour l'air. La courbe de l'etancheite en fonction de l'effort applique n'est pas reversible et on a pu mettre en evidence un 'cycle d'hysteresis' qui explique que certains joints conservent leur etancheite a haute temperature. La methode de mesure d'etancheite au moyen d'un gaz traceur a amene a faire une distinction entre la permeation et le degazage des gaz occlus dans l'interface des joints et a considerer que ni la nature, ni la purete et ni l'etat de surface du joint n'ont une influence primordiale sur l'etancheite de joint. Des valeurs

  19. Pollution urbaine : la France sous le dôme

    OpenAIRE

    Laurent, Eloi

    2017-01-01

    Un an exactement après avoir accueilli la COP21, Paris suffoquait début décembre sous un dôme de pollution, mais aussi Lyon, Villeurbanne, Marseille, Avignon, Rouen ou Grenoble. Airparif, qui a relevé un niveau de particules fines de 146 µg/m3 à Paris en moyenne pour le 1er décembre, précisait dans un communiqué qu’il s’agissait là d’un des pics hivernaux de pollution les plus sévères de ces dix dernières années, les précédents remontant à janvier 2009 et décembre 2007.

  20. Kinetic Modeling of Vacuum Gas Oil Hydrotreatment using a Molecular Reconstruction Approach Modélisation cinétique de l’hydrotraitement de distillats sous vide utilisant une approche de reconstruction moléculaire

    OpenAIRE

    Charon-Revellin N.; Dulot H.; López-García C.; Jose J.

    2010-01-01

    Vacuum Gas Oils (VGO) are heavy petroleum cuts (boiling points ranging from 350 to 550 ˚C) that can be transformed into valuable fuels (gasolines, diesels) by fluid catalytic cracking or hydrocracking. Prior to these conversion processes, hydrotreating is required in order to eliminate the impurities in VGOs. The hydrotreatment process enables to meet the environmental specifications (total sulfur contents) and to prevent nitrogen poisoning of conversion catalysts. In order to develop a kinet...

  1. Utilisation des sous-produits agroalimentaires dans l’alimentation des poissons d’élevage en Côte d’Ivoire

    Directory of Open Access Journals (Sweden)

    Kimou Nestor B.

    2016-03-01

    Full Text Available Cette étude évalue l’impact de l’utilisation des sous-produits agroalimentaires dans l’alimentation des poissons d’élevage en Côte d’Ivoire. Une enquête a été réalisée en 2013 dans quinze principales zones piscicoles sur les caractéristiques technico-économiques des fermes, le profil socio-économique des promoteurs et les pratiques aquacoles, particulièrement l’alimentation des poissons. Les résultats révèlent que 71 % des pisciculteurs enquêtés utilisent des sous-produits agricoles durant au moins un stade de production. Parmi eux, 53 % utilisent exclusivement des sous-produits. Le son de riz (52 % et le mélange de sons de riz et de maïs (28 % sont les plus utilisés. Les prix moyens de ces sous-produits varient entre 20 et 105 FCFA/kg. Oreochromis niloticus et Heterotis niloticus sont les principales espèces élevées en polyculture sur les fermes. Les sous-produits sont utilisés en système semi-intensif, extensif et en rizipisciculture, en majorité en zone rurale. Les pisciculteurs sont pour la plupart des agriculteurs, âgés de plus de 40 ans. Les taux d’utilisation des sous-produits sont plus élevés dans les régions de l’Ouest, du Centre-Ouest et du Sud-Ouest de la Côte d’Ivoire, par rapport à celles du Sud et de l’Est. Les rendements des fermes sont relativement faibles (544 à 2445 kg/ha/an, avec des gains moyens quotidiens de 0,87 et 9,97 g/j pour le tilapia et l’heterotis respectivement. L’analyse des stratégies des acteurs suggère la nécessité de définir des mécanismes d’accompagnement et de financement de la pisciculture, afin que ces acteurs puissent améliorer les formulations alimentaires à partir des matières premières locales et accessibles.

  2. Heat extraction from deep rocks at Soultz-sous-Forets

    International Nuclear Information System (INIS)

    Gerard, A.; Baumgaeriner, J.; Baria, R.

    1996-01-01

    A European coordinated research program for the study of hot-dry-rock systems is in progress at Soultz-sous-Forets (Alsace, France). The aim of this project is the extraction of heat from the granite batholiths distributed along the Rhine graben. The technique used involves important forced water circulations under relatively low-pressures using the natural geologic fractures network. The region concerned extends about 3000 km 2 under both the French and the German territories. The program started in 1987 with preliminary scientific investigations followed by a feasibility study. In December 1995, two deep wells, GPK1 (3600 m) and GPK2 (3900 m) were available and equipped for hydraulic testing. Temperatures encountered can reach 168 C at 3800 m with a geothermal gradient exceeding 3.5 C/100 m below 3600 m. The tests performed have shown that the hydraulic performances of these wells can be considerably improved using a simple well stimulation technique. (J.S.). 1 fig

  3. Installation for analytic chemistry under irradiation; Installation de chimie analytique sous rayonnement

    Energy Technology Data Exchange (ETDEWEB)

    Fradin, J; Azoeuf, P; Guillon, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-07-01

    An installation has been set up for carrying out manipulations and chemical analyses on radioactive products. It is completely remote-controlled and is of linear shape, 15 metres long; it is made up of three zones: - an active zone containing the apparatus, - a rear zone giving access to the active zone, - a forward zone independent of the two others and completely protected from which the remote-control of the apparatus is effected. The whole assembly has been designed so that each apparatus corresponding to an analytical technique is set up in a sealed enclosure. The sealed enclosures are interconnected by a conveyor. After three years operation, a critical review is now made of the installation. (authors) [French] L'installation a ete realisee pour effectuer des manipulations et des analyses chimiques sur des produits radioactifs. Elle est totalement telecommandee et se presente sous une forme lineaire de 15 metres de longueur et comporte trois zones: - une zone active d'appareillage, - une zone arriere d'intervention, - une zone avant independante des deux premieres et totalement protegee, ou s'operent les telecommandes de l'appareillage. L'ensemble a ete concu de facon a ce que chaque appareillage correspondant a une technique d'analyse soit implante dans une enceinte etanche. Les enceintes etanches sont reliees entre elles par un convoyeur. Apres trois annees de fonctionnement nous faisons le bilan et les critiques de l'installation. (auteurs)

  4. Behaviour of uranium under irradiation; Comportement de l'uranium sous irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Adda, Y; Mustelier, J P; Quere, Y [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    phase alloys (U Nb, U Mo) the size and distribution of the bubbles are greatly influenced by the existence of a polygonization lattice, formed before irradiation, inside the grains. During high temperature annealings the bubbles situated on the polygonization lattice grow much faster than those which are distributed inside the crystal. In the case of uranium the bubbles are either distributed at random, or grouped in flat accumulations which can give rise to transgranular cracks, according to the state of the metal and the irradiation temperature. At high temperature an intergranular de-cohesion is also observed. (authors) [French] On expose les principaux resultats obtenus dans l'etude de la formation des defauts introduits dans l'uranium par la fission a basse temperature. Par irradiation a 20 K on a pu evaluer le nombre de paires de Frenkel produites par une fission. L'analyse des courbes de variation de resistivite electrique a permis de preciser l'etendue des pointes de deplacement (deplacement Spike) et le mecanisme de la creation des defauts dus a la fission. Des irradiations a 77 K ont apporte des precisions supplementaires et indiquent un comportement different de l'uranium recristallise et ecroui. On a etudie la diffusion des gaz rares a partir d'alliages metal-gaz rare obtenus par decharge electrique et d'echantillons d'uranium irradie. Le degagement des gaz rares sous vide n'est controle par un processus de diffusion simple que dans le cas ou la teneur en gaz rare est tres faible (U tres faiblement irradie). Par contre quand la teneur en gaz rare est plus forte (echantillons prepares par decharge electrique) le degagement du gaz se produit par formation, croissance et coalescence de bulles; le coefficient de diffusion apparent est alors tres different du coefficient vrai et ne peut etre utilise dans les calculs de gonflement. Dans le cas d'un processus de diffusion simple on a etudie les differents facteurs qui regissent le phenomene. On a montre en

  5. Al-Ḥudayyda sous occupation ottomane (1849-1918

    Directory of Open Access Journals (Sweden)

    Patrice Chevalier

    2011-12-01

    Full Text Available Petit port de pêche situé sur les côtes de la mer Rouge, al-Ḥudayyda change progressivement de statut et de dimensions avec l’arrivée de l’armée ottomane en 1839. Al-Ḥudayyda se voit alors choisi comme l’un des points stratégiques (militaire et politique du dispositif colonial ottoman.Grâce aux différentes infrastructures mises en place par l’administration ottomane, mais aussi grâce à l’ouverture du canal de Suez en 1869, le village attire peu à peu une population multi-ethnique et cosmopolite venue y commercer ou simplement y trouver refuge, dans un contexte politique régional passablement agité. D’une centaine de Yéménites à l’origine, il compte 42 000 âmes à la veille de la première guerre mondiale.La cohabitation sous administration ottomane va-t-elle générer ou non des échanges ou emprunts entre les différentes communautés ? Les Ottomans vont-ils réussir à transcender les multiples appartenances identitaires au profit d’une appartenance citoyenne à l’empire, comme le prévoit leur ambitieux programme de réformes ? La ville d’al- Ḥudayyda sera-t-elle dotée d’une identité spécifique suffisamment forte pour que les individus appartenant aux différentes communautés présentes s’identifient à la ville ? Voilà quelques-unes des questions auxquelles cet article tente de répondre.

  6. Le sous-titrage : une pratique à la marge de la traduction

    Directory of Open Access Journals (Sweden)

    Dumas, Louise

    2014-12-01

    Full Text Available Le sous-titre interlinguistique est un objet difficile à appréhender théoriquement. S'il permet d'aller d'une langue à une autre, il implique aussi un passage de l'écoute à la lecture et du cinéma à l'écriture. Le caractère interlinguistique est souvent mis en avant pour amener à considérer le sous-titrage comme une traduction. Sa complexité médiologique suggère toutefois qu'il est plus qu'une traduction. En même temps, les fortes contraintes (exigence de brièveté, de lisibilité, de cohérence avec l'image cinématographique auxquelles il est soumis font qu'il est moins qu'une traduction – moins exact, moins long, moins « équivalent » au texte original. Le présent travail se propose de réfléchir de manière théorique aux rapports entre sous-titrage et traduction. Pour ce faire, nous confronterons le sous-titrage aux concepts fondamentaux de la traductologie. Premièrement, le passage de l'oral à l'écrit opéré dans les sous-titres est intimement lié à la distinction traductologique entre traduction et interprétariat. Pour pouvoir condenser les dialogues, résumer leur contenu, le sous-titreur est amené à les interpréter, ce qui permet de souligner l'étroite parenté entre traduction, interprétariat et interprétation. Deuxièmement, les fortes contraintes auxquelles sont soumis les sous-titres invitent à s'interroger sur la notion d'équivalence qui se trouve normalement au principe de toute traduction. Toutes les théories traductologiques insistent sur le fait qu'une équivalence n'est jamais parfaite et que le traducteur privilégie certains niveaux d'équivalence : en poussant à l'extrême cette dynamique de sélection constitutive de l'équivalence, on peut considérer que les sous-titres sont équivalents aux dialogues. En tant que cas limite, le sous-titrage permet de tester les concepts fondamentaux de la traductologie et de définir leurs limites.

  7. Brigitte SIMONOT et Gabriel GALLEZOT (2009) (dir.), L’entonnoir : Google sous la loupe des sciences de l’information et de la communication

    OpenAIRE

    Bonaccorsi, Julia

    2013-01-01

    Ce titre annonce d’emblée une posture critique et, plus largement, une promesse de dévoilement. L’approche communicationnelle, affirmée dès le sous-titre, saisit Google comme un objet de recherche à construire à distance des discours promotionnels ou pamphlétaires. La recherche collective prend appui sur une perspective sociotechnique, mais également sociopolitique du moteur de recherche et de ses usages, pour interroger la production de valeurs par la société Google. Le moteur est scruté au ...

  8. The Internet of Things : The Next Big Thing for New Product Development?

    NARCIS (Netherlands)

    Oliana, Rubina; Constantinides, Efthymios; de Vries, Sjoerd A.

    2018-01-01

    More and more physical products are equipped with sensors or RFID that connect them to the Internet; the network of these 'smart products' is known as the Internet of Things. Connected products generate large amounts of data (smart product data) that can pro-vide insights in the product’s

  9. Definition of the chief physical quantities in use in vacuum techniques, and their corresponding units; Definition des principales grandeurs physiques en usage dans la technique du vide et des unites correspondantes

    Energy Technology Data Exchange (ETDEWEB)

    Boulassier, J. C. [Commissariat a l' energie atomique et aux energies alternatives - Service de Physique Appliquee, CEA (France)

    1959-07-01

    It would seem desirable for vacuum technicians to adopt the coherent systems of units generally used in physics. This article presents an internal standardisation project in the CEA, and gives a brief review of the definitions of the physical quantities to which it applies. Reprint of a paper published in 'Le vide', n. 79, January-February 1959, p. 29-35 [French] Il serait souhaitable de voir les techniciens du vide adopter les systemes d'unites coherents usites generalement en physique. Cet article presente un projet de normalisation interne au C.E. A. et rappelle succinctement les definitions des grandeurs physiques auxquelles il se rapporte. Reproduction d'un article publie dans 'Le vide', n. 79, Janvier-Fevrier 1959, p. 29-35.

  10. Measurement of the local void fraction at high pressures in a heating channel; Mesure du taux de vide a haute pression dans un canal chauffant

    Energy Technology Data Exchange (ETDEWEB)

    Martin, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    Void fraction measurements were made in two phase flow boiling systems at high pressures in a uniformly heated, rectangular channel with a high aspect ratio. The local void fraction values were calculated from measurements of the absorption of a thin collimated X-ray beam (2 mm x 0.05 mm). The mean void fraction in a horizontal section results from integration of the local values across the section. At a fixed measuring station the quality and- void fraction were varied by changing the heat flux, flow rate and pressure systematically. Two channels were used differing in length and thickness (150.8 cm x 5.3 cm x 0.2 cm and the significant features of this study are: -1) The void fraction measurements are among the first obtained at such high pressure (80 to 140 kg/cm{sup 2}); -2) In the experimental region under consideration the measurements are systematic and numerous enough to allow accurate interpolations: mass velocity from 50 to 220 g/cm{sup 2}.s, heat flux from 40 to 170 W/cm{sup 2} and calculated steam quality from -0.2 to 0.2; -3) Many tests were performed under local boiling conditions with the mean temperature of the fluid below the saturation temperature; and -4) These results were compared to the predictions of certain models presented in the literature and simple empirical formulae were developed to fit the experimental results. (author) [French] Des mesures de taux de vide ont ete effectuees sur un ecoulement eau-vapeur a haute pression dans un canal vertical, de section rectangulaire tres allongee et chauffe a flux uniforme. Les valeurs du taux de vide local sont obtenues a partir des mesures de l'absorption d'un faisceau de rayons X finement collimate (2 mm x 0,05 mm). La valeur du taux de vide moyen dans une section droite s'en deduit par integration. Cette section droite ou sont realisees les mesures est fixe et, a pression, debit et flux donnes, les variations du titre et du taux de vide sont obtenues par variations de l'enthalpie d'entree. Deux

  11. Une localisation exceptionnelle de la tuberculose vertébrale Mal de Pott sous-occipital

    Science.gov (United States)

    Yahyaoui, Sana; Majdoub, Senda; Zaghouani, Houneida; Fradj, Hosni Ben; Bakir, Dejla; Bouajina, Elyes; Kraiem, Chakib

    2013-01-01

    Le mal de Pott est la forme la plus commune de la tuberculose osseuse touchant essentiellement le rachis dorso-lombaire. La localisation sous-occipitale reste exceptionnelle. Le diagnostic de cette entité est le plus souvent tardif ce qui expose à des complications graves. Les radiographies standard ne sont parlantes qu’à un stade tardif de la maladie, d'où l'intérêt de l'imagerie moderne notamment la tomodensitométrie (TDM) et l'imagerie par résonance magnétique (IRM) qui permettent un diagnostic précoce. Nous rapportons un nouveau cas de tuberculose sous-occipitale. Le diagnostic était posé sur l'imagerie en coupe et confirmé histologiquement à la biopsie transorale. Sont rappelés les aspects en imagerie de cette localisation particulière du mal de Pott. PMID:23819005

  12. Spécificités du sous-titrage pour enfants malentendants

    OpenAIRE

    Comitre-Narvaez, Isabel

    2016-01-01

    Ce travail aborde la spécificité multisémiotique du texte audiovisuel qui est à l’origine de nombreux défis que le traducteur audiovisuel doit relever. Il explore les rapports intersémiotiques qui s’établissent entre le code verbal et le code visuel et se concentre sur les particularités du sous-titrage pour sourds et malentendants dans la “compensation” du déficit auditif, essentiellement son rapport spécifique à l’image. À cet égard, Gottlieb signale que le succès du sous-titrage dépend du ...

  13. Profil lipidique des personnes vivant avec le VIH sous antirétroviral ...

    African Journals Online (AJOL)

    Au regard des connaissances actuelles, aucune étude n'est disponible au Bénin sur le profil lipidique des personnes vivant avec le VIH. L'objectif de la présente étude est de décrire le profil lipidique des personnes vivant avec le VIH sous antirétroviral suivies au CHU-O/P de Porto-Novo. Il s'est agi d'une étude ...

  14. statut de la matiere organique des cambisols et des lixisols sous

    African Journals Online (AJOL)

    Administrateur

    L'étude vise à évaluer la matière organique des Cambisols et des Lixisols sous formations naturelles de longue durée en zone climatique nord-soudanienne et à établir, les relations entre ... sont supérieures à celles des sols des zones sahélienne et sud-soudanienne. ... globale a eu une corrélation positive avec le pH.

  15. As Necrópoles alto-medievais da Serra de São Mamede (Concelhos de Castelo de Vide e Marvão)

    OpenAIRE

    Prata, Sara Maria Sena Esteves

    2012-01-01

    Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Arqueologia A presente dissertação trata questões da Arqueologia funerária para as necrópoles alto-medievais identificadas na Serra de São Mamede (Concelhos de Castelo de Vide e Marvão). Para esta área geográfica, a escassez de fontes escritas, associada ao parco conhecimento sobre as realidades arqueológicas, coloca os séculos que sucederam a queda da Império Romano no Ocidente e anteced...

  16. Marroquins a les illes Pitiüses: Trets del seu projecte migratori i canvis esdevinguts en les seves vides a partir d’aquest.

    OpenAIRE

    Puig Artigas, Ivone

    2012-01-01

    Aquesta tesi es basa en la migració del col·lectiu marroquí a les illes Pitiüses i se centra especialment en els canvis que es produeixen en les seves vides a partir de la migració i en els que es perceben en la part de les seves famílies que resta a origen. La recerca para especial atenció en els factors que afavoreixen o dificulten la integració i l'aculturació dels migrats, en els efectes del fet migratori en l'estatus d'aquells, així com en la relació existent entre determinats factors (c...

  17. Studies and support for the EGS reservoirs at Soultz-sous-Forets. April 2004 - May 2009. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Portier, S.; Vuataz, F.-D. [Centre de Recherche en Geothermie (CREGE), Neuchatel (Switzerland)

    2009-08-15

    This comprehensive final report for the Swiss Federal Office of Energy (SFOE) takes a look at the activities carried out during the period from April 2004 up to May 2009 at Soultz-sous-Forets, France, in connection with the enhanced geothermal systems (EGS) at that location. The report describes the work performed by the Swiss EGS Research and Development group involved in the Soultz project. The principal target set was to install and operate a power plant, enabling the deep reservoir/heat exchanger to be operated, evaluated and improved under realistic conditions. The Swiss contributors have been participating in several work packages: Short and long term tests and medium-term tests of the three-well reservoir/heat exchanger system, development and up-scaling, technical and economic design of larger, industrial, EGS units and the development of stimulation methodology for EGS. The exchange of findings obtained during this project phase is discussed, as is the state-of-the-art of EGS stimulation methods, the interpretation of logging data. Also, seismic /-hydraulic factors, the evaluation of the production/injection performance of the boreholes and reservoir development strategies are discussed as are the modelling of geochemical impact of forced fluid circulation in the deep geothermal reservoir and the results of chemical stimulation tests performed on site.

  18. Long-time water level observations at the HDR-testsite Soultz-sous-Forets

    Energy Technology Data Exchange (ETDEWEB)

    Dornstaedter, J; Heinemann-Glutsch, B; Zaske, J [GTC-Kappelmeyer GmbH, Karlsruhe (Germany)

    1997-12-01

    Pressure or water level measurements have been performed by GTC in different wells at the geothermal testsite Soultz-sous-Forets for six years now. The water lever variations are mainly influenced by earth tides, barometric pressure variations, hydraulic testing and stimulation. The small scale variations are influenced by tidal and barometric forcing functions, the large scale variations by hydraulic testing and stimulation. By analyzing such measurements it is possible to get important information about the hydrualic connections between the boreholes, as well as aquifer parameters. (orig./AKF)

  19. Etude de la propagation sous critique dans les fibres de verre par relaxation de la charge

    OpenAIRE

    R'Mili , M.; Godin , N.; Lamon , J.

    2011-01-01

    International audience; Plusieurs fibres inorganiques de type verre ou céramique (à base de carbure de silicium) sont très sensibles à la propagation sous critique de fissures, activée chimiquement ou thermiquement. Dans ce cas la rupture survient d'une façon prématurée à un niveau de contrainte relativement bas comparé à la contrainte de rupture. Cet article propose une approche statistique de la rupture en fatigue statique fondée sur l'analyse de la rupture des fibres dans une mèche sollici...

  20. L'authentification rapide des poulets de chair sous label: distinction entre poulets issus de souches à croissance lente ou rapide par la spectrometrie dans le proche infrarouge. Analytical methods for the authentification of agro-food products. Gembloux (Belgium. 20 Oct 1999

    Directory of Open Access Journals (Sweden)

    Fumiere O.

    2000-01-01

    Full Text Available Rapid authentification of certified chicken meat: distinguishing slow and fast growing chicken strains using near infrared reflectance spectroscopy. Chicken meat market is characterized by numerous quality marks in Belgium and in Europe: ""Label de Qualite Wallon"" in Belgium, ""Label Rouge"" in France, Labels for geographical origin, organic agriculture, ... The authors have already tested, Near Infrared Reflectance Spectroscopy (NIRS to authenticate slow growing chicken meats. Their study was extended on a larger set and takes account of special labelling according to European regulation 91/1538/CEE. Our results show that the technique could be integrated in an analytical system of surveillance of slow-growing chicken meat products with quality mark.

  1. Structures and properties of (U,Pu)O{sub 2} containing non-active fission products. A simulation of irradiated nuclear fuel; Structure et proprietes de (U, Pu)O{sub 2} contenant des produits de fission sous forme inactive. Une simulation de combustible nucleaire irradie

    Energy Technology Data Exchange (ETDEWEB)

    Schmitz, F [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    We have made oxides with the same uranium and plutonium content, the same stoichiometry and the same fission product content as an oxide fuel (U{sub 0,8}PuO{sub 2})O{sub 1,96} after 2 per cent burn up. We have calculated the stoichiometry changes due to irradiation and checked the calculation by X rays parameters measurements. We have calculated and measured the contraction of the oxide lattice due to fission products in solid solution. Microprobe analysis of precipitates have been made and have lead to the identification of non metallic barium containing compounds and have shown the particular behaviour of molybdenum. Some physical properties have been measured especially the electrical resistivity, the thermal diffusivity and the vapour pressure of zirconium in solid solution. (author) [French] Nous avons fabrique des oxydes dont la composition en uranium et plutonium, la stoechiometrie et la teneur en produit de fission, sont identiques a celles d'un oxyde (U{sub 0,8}PuO{sub 2})O{sub 1,96} ayant subi 2 pour cent de combustion. Nous avons calcule les changements de stoechiometrie entraines par l'irradiation et controle ces calculs par des mesures de parametre. Nous avons calcule et mesure la contraction du reseau due aux produits de fissions solubles dans la matrice. Des analyses a la microsonde des precipites de produits de fission insolubles ont ete faites et ont conduit a l'identification de composes non metalliques contenant du baryum et a la mise en evidence du role particulier du molybdene. Certaines proprietes physiques ont ete mesurees sur ces composes, en particulier la resistivite electrique, la diffusivite thermique et la tension de vapeur du zirconium dissout dans la matrice. (auteur)

  2. Résonance magnétique nucléaire 1H basse résolution. Le meilleur outil pour une détermination précise de la teneur en hydrogène des produits pétroliers Low Resolution 1h Nmr. The Ultimate Tool for Accurate Determination of Hydrogen Content in Petroleum Products

    Directory of Open Access Journals (Sweden)

    Gautier S.

    2006-11-01

    Full Text Available Un spectromètre RMN basse résolution à impulsions a été utilisé pour déterminer la teneur totale en hydrogène d'une large gamme de fractions pétrolières. On a constaté une excellente cohérence avec la teneur théorique en hydrogène de plusieurs composés purs; la répétabilité de la méthode est de 0,03%. La validation de cette méthode a été effectuée sur une vaste gamme de produits pétroliers comprenant notamment : distillats moyens de distillation directe, de craquage, d'hydrotraitement ou d'hydrocraquage, gazoles sous vide, bruts lourds, résidus atmosphériques de distillation directe ou d'hydrotraitement, soit au total 121 échantillons. Cette méthode s'est avérée la plus précise pour le calcul de la consommation d'hydrogène sur unités d'hydrotraitement, pour un domaine allant de 0,1 à 2,5 % pds. A low resolution pulsed NMR spectrometer has been used to determine total hydrogen content for a wide range of petroleum cuts. Excellent agreement has been found with the theoritical amount of hydrogen on pure compounds and the repeatability of the method is 0. 03%. The validation of the method has been done on a very large range of petroleum products, including straight run, cracked, hydrotreated and hydrocracked mid-distillates, vacuum gasoils, heavy crudes, straight run and hydrotreated atmospheric residues, representing 121 samples and a hydrogen consumption range during processing from 0,1 to 2. 5 wt.

  3. Les effets potentiels du taping chez une population adulte souffrant d'un conflit sous-acromial

    OpenAIRE

    Roch, Sylvie; Thétaz, Alain; Balthazard, Pierre

    2012-01-01

    Introduction : Le conflit sous-acromial est une pathologie fréquente qui touche une grande partie de la population. Quelques revues de la littérature recommandent une prise en charge spécifique, mais peu d’études proposent le taping comme adjuvant aux traitements préconisés. Ainsi ce travail de bachelor a pour objectif de déterminer les effets potentiels du taping chez une population adulte souffrant de conflit sous-acromial. Méthodologie : Notre recherche d’études s’est effectuée de janvier ...

  4. Vides de Simón de Rojas Clemente (1777-1827 en el herbario del Real Colegio Alfonso XII de San Lorenzo de El Escorial (Madrid, España

    Directory of Open Access Journals (Sweden)

    Perea, Domingo

    1997-12-01

    Full Text Available In the present paper, the discovery of grape-vine mounted sheets from the Simón de Rojas Clemente herbarium, which were found in the Herbarium of the Real Colegio Alfonso XH in San Lorenzo de El Escorial, is reported. This material completes the collection of Clemente's vines which makes up one of the historical collections deposited in the MA herbarium.Damos a conocer unos pliegos de vides procedentes del herbario de Simón de Rojas Clemente que han aparecido en el Gabinete de Ciencias Naturales del Real Colegio Alfonso XII de San Lorenzo de El Escorial. Estos materiales completan la colección de vides de Clemente que constituye uno de los herbarios históricos depositados en MA.

  5. Effect of pressure on the vacuum cooling of iceberg lettuce

    Energy Technology Data Exchange (ETDEWEB)

    Ozturk, Hande Mutlu [Pamukkale University, Food Engineering Department, Faculty of Engineering, Denizli (Turkey); Ozturk, Harun Kemal [Pamukkale University, Mechanical Engineering Department, Faculty of Engineering, 20070 Kinikli, Denizli (Turkey)

    2009-05-15

    Vacuum cooling is known as a rapid evaporative cooling technique for any porous product which has free water. The aim of this paper is to apply vacuum cooling technique to the cooling of the iceberg lettuce and show the pressure effect on the cooling time and temperature decrease. The results of vacuum cooling are also compared with conventional cooling (cooling in refrigerator) for different temperatures. Vacuum cooling of iceberg lettuce at 0.7 kPa is about 13 times faster than conventional cooling of iceberg lettuce at 6 C. It has been also found that it is not possible to decrease the iceberg lettuce temperature below 10 C if vacuum cooling method is used and vacuum pressure is set to 1.5 kPa. (author) [French] Le refroidissement sous vide est connu comme une technique evaporative rapide refroidissant pour n'importe quel produit poreux qui a de l'eau libre. Le but de ce papier est d'appliquer le refroidissement sous vide pour le refroidissement de la laitue et examiner l'effet de la pression sur le temps de refroidissement et la diminution de temperature. Les resultats de refroidissement sous vide sont aussi compares avec le refroidissement conventionnel (refroidissement dans le refrigerateur) pour les differentes temperatures. Le refroidissement a vide de laitue a 0.7 kPa est environ 13 fois plus vite que le refroidissement conventionnel de laitue croquante a 6 C. Il a ete aussi constate qu'il n'est pas possible de diminuer la temperature de laitue ci-dessous 10 C si le refroidissement sous vide est utilise comme methode et la pression a vide est montree a 1.5 kPa. (orig.)

  6. Thermal and radiation induced polymerisation of carbon sub-oxide; Polymerisation thermique et sous rayonnement du sous-oxyde de carbone

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Michel

    1964-03-15

    This research thesis addresses the study of the polymerisation of carbon sub-oxide (C{sub 3}O{sub 2}) in gaseous phase. As this work is related to other researches dealing with the reactions of the graphite-CO{sub 2} system which occur in graphite-moderated nuclear reactors, a first intention was to study the behaviour of C{sub 3}O{sub 2} when submitted to radiations. Preliminary tests showed that the most remarkable result of this action was the formation of a polymer. It was also noticed that the polymerisation of this gas was spontaneous however slower at room temperature. The research thus focused on this polymerisation, and on the formula of the obtained polymer. After some generalities, the author reports the preparation, purification and storage and conservation of the carbon sub-oxide. The next parts report the kinetic study of thermal polymerisation, the study of polymerisation under γ rays, the study of the obtained polymer by using visible, UV and infrared spectroscopy, electronic paramagnetic resonance, and semi-conductivity measurements [French] Le but de ce travail est l'etude de la polymerisation du sous-oxyde de carbone, C{sub 3}O{sub 2}, en phase gazeuse. Ce travail est en relation avec d'autres recherches concernant les reactions du systeme graphite-CO{sub 2} qui se produisent dans les reacteurs nucleaires de la filiere moderee au graphite. Notre premiere intention etait donc d'etudier le comportement de C{sub 3}O{sub 2} sous l'action des rayonnements. Or des essais preliminaires nous ont rapidement montre que le resultat le plus marquant de cette action etait l'obtention d'un polymere. On a egalement remarque que ce gaz polymerisait spontanement - quoique moins rapidement - a la temperature ambiante. Notre etude s'est donc circonscrite a cette polymerisation, avec ou sans rayonnements, ainsi qu'a son aboutissement: le polymere, dont nous avons tente d'eclaircir la formule. Au terme de cette etude, bien que certains points ne soient pas encore

  7. Experimental study of columns partially filled with concrete under compressive axial loads Etude expérimentale des colonnes partiellement remplis par le béton sous charge axiale

    Directory of Open Access Journals (Sweden)

    Achoura D.

    2012-09-01

    Full Text Available Dans cette étude, on présente les résultats expérimentaux obtenus sur des poteaux mixtes béton-acier mince réalisés par soudures. Un total de 24 profilés en acier, et en forme de I a été testé sous charge de compression uni-axiale à l’âge de 28 jours. les spécimens ont été réparties comme suit: 4 à vides, 4 partiellement remplies avec un béton ordinaire sans l’addition des connecteurs, 4 renforcés par des connecteurs de cisaillements de type cornière en U, 4 autres l’ont été avec des connecteurs de cisaillements type goujons et 8 restants ont été renforcés avec des liens transversaux d’espacement 100mm, 50mm, soudés aux bouts des ailes opposées. Les principaux paramètres étudiés sont: l’élancement du profilé, le type de connecteur de renforcement. A partir des résultats d’essais obtenus, il est confirmé que les parois minces sont plus sensibles de l’apparition au voilement et la longueur des profilés a un effet considérable sur la capacité portante et le mode de rupture. L’addition des connecteurs de renforcement a confirmé l’augmentation de la charge ultime par rapport aux profilés sans connecteurs. In the present work, results of tests conducted on thin welded steel-concrete stubs are presented. A total of 24 stubs an I steel section were tested under axial compression at 28 days after the date of casting, 4 were empty, 4 filled with normal concrete, 8 columns had shear connecters welded along the centreline of the web, and 8 columns had steel rods welded between the tips of opposing flanges on both sides of the spacing of the transverse link 100 mm and 50 mm. The main parameters studied were: the heel height, and type of connector strengthening. From the test results, it is confirmed that the thin walls are more sensitive to the appearance local buckling and the length of the profiles has a significant effect on the bearing capacity and failure mode. The bearing capacity was increased

  8. Vadītāja darbība izglītības iestādes demokrātiskas vides veidošnā.

    OpenAIRE

    Ķepule, Inga

    2009-01-01

    Maģistra darba temats „Vadītāja darbība izglītības iestādes demokrātiskas vides veidošanā”. Zinātniskais vadītājs: Profesors, Dr. Phys., Andris Grīnfelds. Maģistra darba mērķis ir izstrādāt priekšlikums vadītāja efektīvai darbībai demokrātiskas vides aspektā. Maģistra darbā ir raksturoti teorētiskie aspekti par iestādes demokrātiskas vides jēdzienu, ietverot visus ietekmējošos faktorus, kā vadības stilu, motivāciju, un citus elementus. Maģistra darbā veiktā pētījuma rezultātā ir i...

  9. Efektivitātes pētījums: Ceļu Satiksmes drošības direkcijas sociālās vides reklāmas

    OpenAIRE

    Vītola, Zanda

    2013-01-01

    Darba tēma ir „Efektivitātes pētījums: Ceļu Satiksmes drošības direkcijas sociālās vides reklāmas”. Pētījuma problēma – ik gadu palielinās upuru un negadījumu skaits uz Latvijas ceļiem, tāpēc ir svarīgi noskaidrot, cik efektīvas ir CSDD vides reklāmas, lai šo tendenci novērstu. Darba mērķis – noskaidrot sabiedrības viedokli un attieksmi pret CSDD vides reklāmām, atklājot, kā un vai reklāmu vēstījums ietekmē sabiedrību. Darbā izmantota Bārta teorija semiotiskās analīzes izpratnei, Kot...

  10. Personālā datora sistēmas bloka vides snieguma novērtējums un ekodizaina analīze

    OpenAIRE

    Šteina, Māra

    2009-01-01

    Maģistra darba „Personālā datora sistēmas bloka vides snieguma novērtējums un ekodizaina analīze” pamatā ir biroja datora sistēmas bloka ietekmes uz vidi novērtējums visā tā dzīves cikla laikā, izvērtējot arī lietotāju un iesaistīto pušu nozīmi. Darbs sastāv no divām daļām – teorētiskās un praktiskās. Pirmā daļa ir teorētiskajā daļa, kurā autore apskatīja pieejamos literatūras avotus un citu autoru darbus, izvērtējot tēmas aktualitāti, galvenās problēmas un to risinājumus. Otrā daļa ...

  11. Kompanijas „ADIDAS” iekšējās un ārējās vides analīze

    OpenAIRE

    Kraiņeva, Jūlija

    2013-01-01

    ,,Kompānijas “Adidas” iekšējās un ārējās vides analīze”. Autore – Jūlija Kraiņeva. Darba vadītāja – lektore Irina Rezepina. Darbs „Sociālo zinātņu bakalaurs vadībzinātnē” akadēmiskā grāda iegūšanai: 69 lapas, 8 attēli, 15 tabulas, 41 izmantotās literatūras un citi informācijas avoti. Pētījuma mērķis ir аnаlizēt kompānijas „Аdidas” ārējo un iеkšējo vidi, izstrādāt рriеkšlikumus tо рilnvеidоšаnаi un izvirzīt rekomendācijas, kuras palīdzēs uzlabot kompānijas darbības efektivitāti. Darba tē...

  12. E-vides pieejamība iedzīvotājiem ar redzes traucējumiem Latvijā

    OpenAIRE

    Ose, Laura

    2011-01-01

    Pētījuma problēma ir tehnoloģiju nepietiekama izmantošana cilvēkiem ar redzes traucējumiem. Pētījuma mērķis ir noskaidrot, kāpēc cilvēki ar redzes traucējumiem neizmanto informācijas tehnoloģijas un tīmekļa vietnes reģionu galvenajās bibliotēkās un izanalizēt, vai reģionu galveno bibliotēku tīmekļa vietnes atbilst e – vides pieejamības starptautiskajiem standartiem. Pēc aptaujas rezultātiem reģionu galvenajās bibliotēkās informācijas tehnoloģijas izmanto 17 pastāvīgie bibliotēkas apmekl...

  13. Guide pour la rédaction de cahiers des charges pour la sous-traitance en mécano-soudage

    CERN Document Server

    Cheminat, Olivier

    2016-01-01

    Ce rapport est principalement dédié aux rédacteurs de cahiers des charges lors de sous-traitance en soudage. Le choix de faire sous-traiter une fabrication et le choix du sous-traitant revêtent une triple dimension technique, économique et stratégique. Un sous-traitant n'est pas un simple fournisseur ; il est un véritable partenaire technique pour le donneur d'ordre qui lui confie la réalisation d'un produit qu'il a lui-même conçu. La sous-traitance nécessite alors, outre un audit préalable du partenaire, un suivi en continu, à distance, et une communication entre le donneur d'ordre et le sous-traitant. Le cahier des charges est un des éléments de cette communication. C'est un outil essentiel, notamment lorsque le marché est soumis à des normes, imposées par contrat entre le donneur d'ordre et le sous-traitant. Ce présent document est un guide pour la rédaction du document de consultation, afin d'être le plus précis et exhaustif possible, mais il ne saurait être utilisé pour établi...

  14. Registration of vehicles at the Gex sous-préfecture: now by appointment only

    CERN Multimedia

    2016-01-01

    The Gex sous-préfecture has informed CERN that it has taken the following steps in order to reduce waiting times at its counters for the issue of carte grise vehicle registration certificates. As of 1 February 2016, you must book an appointment via the website http://www.rdv.ain.gouv.fr/ for all services relating to the registration of vehicles, in particular the:   change of the holder of a registration certificate, issue of a certificat de situation administrative (administrative status certificate required for the sale of a vehicle), change of marital status (or company name in the case of legal entities), change of address, change in the technical specification of the vehicle, corrections to registration certificates, equests for duplicates (loss or theft of registration certificates), registration of a diplomatic vehicle (CERN), registration of a new vehicle, registration of vehicles purchased tax-free in the Pays de Gex free zone (formerly TTW series), and import of vehicles (from ...

  15. Patrimonialiser les bases de sous-marins et le Mur de l’Atlantique

    OpenAIRE

    Prelorenzo, Claude

    2014-01-01

    Le Mur de l’Atlantique court de la frontière espagnole jusqu’au nord de la Norvège. Au sein de ce dispositif sont installées cinq bases de sous-marins : Dunkerque, Saint-Nazaire, Lorient, La Rochelle et Bordeaux. Après une période de purgatoire, liée aux souvenirs trop frais des bombardements qu’ils ont attirés sur les villes, les édifices du mur sont entrés dans la sphère de la culture et du tourisme. Nous posons alors la question suivante : de quoi ces édifices portent-ils témoignage, et no...

  16. Raconter l’Histoire (sous la direction de Prstojevic A.

    Directory of Open Access Journals (Sweden)

    Sophie Thiriar

    2011-10-01

    Full Text Available Sous le titre Raconter l’Histoire, Alexandre Prstojevic a réuni treize articles, faisant suite à deux colloques qui ont eu lieu à Paris en mai 2006 et à Montréal en octobre de la même année. Treize pointures du monde slave se sont intéressées pour l’occasion à la représentation littéraire et cinématographique de l’histoire – principalement celle de l’Europe centrale et orientale – après le spectacle mortifère des deux guerres mondiales. Suite aux multiples expériences déshumanisantes dont est...

  17. Scintigraphy of the Pericerebral Subarachnoidspaces; Scintigraphie des Espaces Sous-Arachnoidiens Pericerebraux

    Energy Technology Data Exchange (ETDEWEB)

    Oberson, R.; Martini, T. [Institut Universitaire de Radiologie Medicale, Hopital Cantonal, Lausanne (Switzerland)

    1969-05-15

    -auricular shunt of the C.S.F. in cases of symptomatic hydrocephalus of traumatic or occult origin in adult or child patients. The study was based on an analysis of over 100 scintigrams of the pericerebral subarachnoid cavities. From this, the authors were gradually able to work out the normal and pathological symptomatology of this field, from the point of view of both cisternal morphology and fluid hydrodynamics. (author) [French] L'exploration des espaces sous-arachnoiediens pericerebraux par les radioisotopes (cisternographie radioisotopique ou 'RISA- cisternography' ) prend une place de plus en plus importante parmi les techniques neuroradioisotopiques de diagnostic. Elle fournit de precieux renseignements sur la permeabilite des espaces sous-arachnoiediens et sur la dynamique du liquide cephalo-rachidien (LCR). On doit actuellement la considerer comme indispensable et irremplacable dans le diagnostic de certaines affections neurologiques, tout comme la gamma-encephalographie et les techniques neuroradiologiques plus classiques (angiographie et pneumographie cerebrales). En effet, cet examen est seul a preciser l'aspect morphologique global des espaces sous-arachnoiediens pericerebraux; tout en renseignant sur la permeabilite des citernes pericerebrales et des sillons de la convexite, il fournit une image scintigraphique typique et symetrique, facile a observer, de face et de profil, des voies principales de circulation du LCR cisternal. L'image scintigraphique d'une citerne indique qu'elle est permeable et que l'espace sous-jacent l'est aussi. Du point de vue dynamique, la cisternographie radioisotopique, outre la demonstration par voie scintigraphique de la permeabilite des citernes, met en evidence le schema normal ou pathologique de la dynamique du LCR. Le schema normal de progression du LCR est actuellement bien etabli. Il est du plus haut interet de le connaitre afin de distinguer deja quelques syndromes pathologiques: la presence d'une fistule de LCR (la

  18. Ifp's New Flexible Hydrocracking Process Combines Maximum Conversion with Production of High Viscosity, High Vi Lube Stocks Le nouveau procédé IFP d'hydrocraquage à haute flexibilité combine conversion maximum et production de bases, huile à haute viscosité et à indice de viscosité élevé

    Directory of Open Access Journals (Sweden)

    Hennico A.

    2006-11-01

    Full Text Available Institut Français du Pétrole (IFP has developed a new dual catalytic system for its hydrocracking process that enables high conversion to middle distillates and production of high viscosity, high VI lube stocks. Although the hydrocracking process is mainly devoted to the conversion of vacuum distillates, deasphalted oil or mixture of both into high quality middle distillates, it can also produce a residue, that after dewaxing will be a very high VI lube base oil. In this presentation major emphasis is put on the possibility to produce very high VI lubes with high viscosity thanks to the development of the new catalytic system. Large flexibility in feedstock selection and easy control of operating variables allow the production of all grades of lube oils associated with high quality middle distillates for a large range of conversion levels. L'Institut Français du Pétrole (IFP a mis au point, pour son procédé d'hydrocraquage, un nouveau système catalytique à 2 catalyseurs qui permet une forte conversion en distillats moyens et la production de fractions lubrifiantes à haute viscosité et indice de viscosité élevé. Si le procédé d'hydrocraquage est essentiellement utilisé pour la conversion de distillats sous vide, d'huile désasphaltée ou d'un mélange des deux en distillats moyens de haute qualité, il peut aussi produire un résidu qui, après déparaffinage, fournira une base pour lubrifiant à indice de viscosité très élevé. Cet article souligne particulièrement la possibilité de produire des lubrifiants à indice de viscosité très élevé et haute viscosité, grâce à ce nouveau système catalytique. Une grande flexibilité dans le choix des produits à traiter et la facilité de contrôle des paramètres opératoires permet la production de toutes les qualités d'huiles lubrifiantes associées à des distillats moyens de haute qualité, pour une large gamme de niveaux de conversion.

  19. Les particules illocutoires, variable d’ajustement de la traduction sous-titrante au cinéma

    Directory of Open Access Journals (Sweden)

    Ève Vayssière

    2010-12-01

    Full Text Available Die illokutiven Partikel fungieren als Anpassungsvariable, die beim Übersetzungsakt zur Untertitelung von Filmen entweder weggelassen werden oder erscheinen. Wenn sie einfach gelöscht werden, ergeben sich weder grammatikalische Störungen noch Informationsverlust. Das Auftauchen dieser Partikel in den deutschen Untertiteln zeigt jedoch, wie wichtig sie sind: Als Partikel der Oralität tragen sie zur Idiomatizität bei.Les particules illocutoires sont des variables d’ajustement lors de l’acte de traduction sous-titrante au cinéma, elles peuvent être supprimées sans que cela occasionne de dysfonctionnement grammatical et elles disparaissent lors de la traduction en français sans que cela occasionne une perte d’informations. Leur apparition dans les sous-titres allemands montre néanmoins leur importance : particules de l’oralité, elles sont vecteur d’« idiomaticité ».

  20. Patrimonialiser les bases de sous-marins et le Mur de l’Atlantique

    Directory of Open Access Journals (Sweden)

    Claude Prelorenzo

    2011-06-01

    Full Text Available Le Mur de l’Atlantique court de la frontière espagnole jusqu’au nord de la Norvège. Au sein de ce dispositif sont installées cinq bases de sous-marins : Dunkerque, Saint-Nazaire, Lorient, La Rochelle et Bordeaux. Après une période de purgatoire, liée aux souvenirs trop frais des bombardements qu’ils ont attirés sur les villes, les édifices du mur sont entrés dans la sphère de la culture et du tourisme. Nous posons alors la question suivante : de quoi ces édifices portent-ils témoignage, et nous envisageons plusieurs aspects : leur évident modernisme qui les situe à un moment de l’histoire de l’architecture, leur hétérogénéité qui fait de ces bâtiments des sortes d’ovni, sans aucun rapport ni d’échelle ni de forme avec l’architecture civile, une technique d’enfouissement et de camouflage génératrice d’un nouveau paysage. Mais ces édifices peuvent-ils être exonérés de leur but guerrier ? Quel est le message de leur recyclage dans le culturel, le festif ou le commercial ? Deux bases de sous-marins sont plus particulièrement présentées, celle de Saint-Nazaire et celle de Lorient.The Atlantic Wall stretches from the Spanish border to northern Norway. Within this system there are five bases for submarines: Dunkirk, Saint-Nazaire, Lorient, La Rochelle and Bordeaux. After a period of purgatory, with the painful memories of the wartime air raids which destroyed the cities around the bases, the buildings which the Atlantic Wall comprises have now entered the spheres of culture and tourism. What do these buildings bear witness to? Their frank modernism puts them at a precise moment in the history of architecture. Their heterogeneity makes them like UFOs, without any relation of scale or form to civil architecture. Their specific techniques of dissimulation and camouflage created new landscapes. But can these buildings be freed from the memories of their original military purpose? What message is

  1. Eiropas Savienības uzņēmējdarbības vide start-up uzņēmumu attīstīšanai (salīdzinošā analīze ar ASV)

    OpenAIRE

    Kapenieks, Kristaps

    2014-01-01

    Maģistra darbā „Eiropas Savienības uzņēmējdarbības vide start-up uzņēmumu attīstīšanai (salīdzinošā analīze ar ASV)” tiek pētīts, kā uzņēmējdarbības vide ietekmē start-up uzņēmējdarbības aktivitāti un kur uzņēmējdarbības vide ir piemērotāka start-up uzņēmējdarbībai – Eiropas Savienībā vai ASV. Lai iegūtu atbildi uz šiem jautājumiem, maģistra darbā tiek pētīts, kas ir start-up uzņēmums un kā to ietekmē ārējā uzņēmējdarbības vide, salīdzināti vides faktoru dati par četrām Eiropas Savienības da...

  2. Integral modeling and financial impact of the geothermal situation and power plant at Soultz-sous-Forets

    International Nuclear Information System (INIS)

    Heidinger, Ph.

    2010-01-01

    The science about deep Enhanced Geothermal Systems (EGS) is still an emerging process and for further spreading economics is the key of the technology. To understand the financial situation, a program for economic evaluation was developed. This software (Euronaut) is completely modularized and considers all cash flows. Projects like an EGS are wrapped into tree-like structures. Based on the results which were gained at Soultz-sous-Forets, two configurations were designed. The first EGS configuration consists of a simplified two well (doublet) system where the dependencies of all components (mainly the reservoir, wells, pumps and the heat-to-power conversion unit) are physically and economically linked together. The realization of these dependencies and their complex interactions enable a sensitivity analysis of the borehole depth and reservoir depth, respectively. As a result, depth dependent effective costs and revenues of an EGS plant with the geohydrological characteristics of Soultz-sous-Forets are determined. As a future development, the second configuration will adapt the actual situation at Soultz-sous-Forets with the individual features of all four wells (GPK1 - GPK4). Then, this model can be used for all kinds of sensitivity analyses to clarify the impact of certain components or to optimize the operation scheme; e.g. the flow rates. (author)

  3. Fuel elements for pressurised-gas reactors; Elements combustibles des piles a gaz sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J A; Englander, M; Gauthron, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The design and fabrication of fuel elements for the first CO{sub 2} pressurized reactors have induced to investigate: various cladding materials, natural uranium base fuels, canning processes. The main analogical tests used in connection with the fuel element study are described. These various tests have enabled, among others, the fabrication of the fuel element for the EL2 reactor. Lastly, future solutions for electrical power producing reactors are foreseen. (author)Fren. [French] L'etude et la realisation d'elements combustibles pour les premieres piles a CO{sub 2} sous pression ont conduit a examiner: les divers materiaux de gaine, les combustibles a base d'uranium naturel, les modes de gainage. Les principaux essais analogiques ayant servi au cours de l'etude de la cartouche sont decrits. Ces divers essais ont notamment permis la realisation de la cartouche de la pile EL2. Enfin sont envisagees les solutions futures pour les piles productrices d'energie electrique. (auteur)

  4. Kunstens (h)vide verden

    DEFF Research Database (Denmark)

    Philipsen, Lotte

    2008-01-01

    Artiklen præsenterer en analyse af, hvordan den ny-internationale samtidskunst på strategisk vis har anvendt 'det æstetiske' som politisk redskab til udfordring af en kunstinstitution, der syntes indkapslet i et vestligt paradigme....

  5. Les tuméfactions sous mandibulaires: à propos de 42 cas et revue de la literature

    Science.gov (United States)

    Darouassi, Youssef; Mliha Touati, Mohamed; Chihani, Mehdi; Nadour, Karim; Ammar, Haddou; Bouaity, Brahim

    2014-01-01

    Les tuméfactions de la région sous mandibulaire sont une entité pathologique fréquente, caractérisées par un tableau clinique et une démarche diagnostique stéréotypée, et une unicité presque constante au plan chirurgical. Notre travail est une étude rétrospective sur une période de 5 an d'une série consécutive de 42 cas de tuméfactions sous mandibulaires qui ont été colligés au service d'oto-rhino-laryngologie et de chirurgie cervico-faciale de l'hôpital militaire Avicenne de Marrakech. L’âge moyen des patients était de 41 ans. Une prédominance masculine a été retrouvée. Le tableau clinique a été dominé par la tuméfaction sous mandibulaire. Tous les patients ont bénéficié d'une échographie cervicale. La tomodensitométrie cervicale a été réalisée chez 7 patients. La première étiologie était la sous maxillite chronique lithiasique dans 39,02% des cas. Le traitement était chirurgical dans tous les cas. En comparant les résultats avec ceux rapportés dans la littérature, nous allons discuter les différents aspects diagnostiques et thérapeutiques des étiologies les plus fréquentes. Les tuméfactions de la région sous mandibulaire sont fréquentes, nécessitant une démarche diagnostique rigoureuse et une prise en charge thérapeutique adaptée. PMID:25469195

  6. Working methods experimentation: Bauzot deposit, Bauzot and La Faye deposits - Empty room with initial thin veins sub-layers; Essais de methodes d'exploitation: Gisement de Bauzot, Gisements de Bauzot et La Faye - Chambre vide avec sous-niveaux prealables en filons minces

    Energy Technology Data Exchange (ETDEWEB)

    Paucard, A. [Division de Grury, Direction des recherches et exploitations minieres, Commissariat a l' energie atomique et aux energies alternatives - CEA (France)

    1959-07-01

    The Bauzot deposit was one of the first small CEA workings, and thus served as a guinea-pig for the testing of several working methods. The lessons learned at Bauzot render the rapid choice of a suitable method for the working of large CEA deposits possible. Reprint from 2 papers published in 'Revue de l'Industrie Minerale', vol. 40, n. 12, dec 1958, and Nov 1958, p. 831-843 [French] Le gisement de Bauzot a ete un des premiers petits gisements equipes du CEA. Il a servi de champ d'experience. Plusieurs methodes d'exploitation ont ete essayees. Les renseignements qui ont ete tires de ces essais permettront de choisir rapidement une methode parfaitement adaptee aux gisements importants du CEA. Reproduction de deux article publie dans la 'Revue de l'Industrie Minerale', vol. 40, n. 12, dec 1958, et Nov 1958, p. 831-843.

  7. Sigand : une application SIG sous androïd (tablette de la gestion des chantiers

    Directory of Open Access Journals (Sweden)

    CHAKIB SAFAR BATI

    2016-12-01

    Full Text Available L’introduction de données terrain pour les études environnementales ou de gestion de l’espace, régionales ou locales est une nécessité incontournable pour la validation des traitements et des interprétations mais aussi pour fournir des compléments d’informations aux divers travaux. Mais ce retour terrain est également de plus en plus demandé pour les gestionnaires de chantiers et de projets qui ont une exigence de contrôle ou de suivi et donc d’une information temps réel sur l’avancement des travaux, autrement pour introduire de nouvelles informations sur la base de données géoréférencées. Les avancées technologiques en matière de manipulation de l’information géographique (GPS, tablette graphique, téléphone portable, réalité augmentée permettent d’espérer la mise à dispositiondes professionnels, voire d’un plus large public, des outils adéquats pour de tels travaux. Actuellement, les outils d’élaboration, de gestion et d’exploitation des bases de données géographiques (solutions SIG ne sont pas encore complètement opérationnels en version « tablette » ; des applications telles que Qgis ou ArcGis sous Androïd attendent encore des développements. Nous présentons ici la première version d’une application SIG sous Androïd (disponible sur tablette pour la gestion en temps réel des chantiers qui permet de charger des couches vectorielles et de les mettre à jour sur le terrain en fonction de l’observation directe ; les couches (préalablement géoréférencées sont projetées sur des fonds cartographiques fournis par un serveur cartographique Google Maps (Route, Satellite, terrain; dans le cas d’absence de connexion internet, le fond cartographique est ramené d’un cache. Nous utilisons SpatialiteAndroïd pour le stockage et la manipulation des données géographiques. Le contrôleur de cartes Google Maps est employé pour afficher en mode cartographique les données stockées dans

  8. High pressure experimental water loop; Cellule experimentale a eau sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Grenon, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Terny, M [Societe Grenobloise d' Etudes et d' Applications Hydrauliques, 38 (France)

    1958-07-01

    A high pressure experimental water loop has been made for studying the detection and evolution of cladding failure in a pressurized reactor. The loop has been designed for a maximum temperature of 360 deg. C, a maximum of 160 kg/cm{sup 2} and flow rates up to 5 m{sup 3}/h. The entire loop consists of several parts: a main circuit with a canned rotor circulation pump, steam pressurizer, heating tubes, two hydro-cyclones (one de-gasser and one decanter) and one tubular heat exchanger; a continuous purification loop, connected in parallel, comprising pressure reducing valves and resin pots which also allow studies of the stability of resins under pressure, temperature and radiation; following the gas separator is a gas loop for studying the recombination of the radiolytic gases in the steam phase. The preceding circuits, as well as others, return to a low pressure storage circuit. The cold water of the low pressure storage flask is continuously reintroduced into the high pressure main circuit by means of a return pump at a maximum head of 160 kg /cm{sup 2}, and adjusted to the pressurizer level. This loop is also a testing bench for the tight high pressure apparatus. The circulating pump and the connecting flanges (Oak Ridge type) are water-tight. The feed pump and the pressure reducing valves are not; the un-tight ones have a system of leak recovery. To permanently check the tightness the circuit has been fitted with a leak detection system (similar to the HRT one). (author)Fren. [French] Une cellule experimentale a eau sous pression a ete realisee pour l'etude de l'evolution et de la detection de ruptures de gaines dans le cas d'un reacteur pressurise. Les performances de ce circuit sont: 350 deg. C maximum pour la temperature et 160 kg/cm{sup 2} maximum pour la pression, le debit pouvant atteindre 5 m{sup 3}/h. Le circuit complet est constitue de plusieurs parties: un circuit principal avec pompe de circulation a rotor immerge, preiseur a vapeur, tubes chaudieres

  9. Investigation of persistent Multiplets at the EGS reservoir of Soultz-Sous-Forêts, France

    Science.gov (United States)

    Lengliné, O.; Cauchie, L.; Schmittbuhl, J.

    2017-12-01

    During the exploitation of geothermal reservoirs, abundant seismicity is generally observed, especially during phases of hydraulic stimulations. The induced seismicity at the Enhanced Geothermal System of Soultz-Sous-Forêts in France, has been thoroughly studied over the years of exploitation. The mechanism at its origin has been related to both fluid pressure increases during stimulation and aseismic creeping movements. The fluid-induced seismic events often exhibit a high degree of similarity and the mechanism at the origin of these repeated events is thought to be associated with slow slip process where asperities on the rupture zone act several times.To have a better understanding of the mechanisms associated with such events and on the damaged zones involved during the hydraulic stimulations, we investigate the behavior of the multiplets and their persistent nature over several water injection intervals. For this purpose, we analyzed large datasets recorded from a borehole seismic network for several water injection periods (1993, 2000). For each stimulation interval, thousands of events are recorded at depth. We detected the events using a STA/LTA approach and classified them into families of comparable waveforms using an approach based on cross-correlation analysis. Classification of the seismic events is then improved depending on their location within the multiplets. For this purpose, inter-event distances within multiplets are examined and determined from cross-correlation analysis between pairs of events. These distances are then compared to the source dimensions derived from the estimation of the corner frequencies estimation. The multiplets properties (location, events size) are then investigated within and over several hydraulic tests. Hopefully these steps will lead to increase the knowledge on the repetitive nature of these events and the investigation of their persistence will outline the heterogeneities of the structures (regional stress

  10. Renewable energies dossier. The early beginnings of a change in the building trade. Outstanding evolutions presented at ISH 2001. A development still bounded by the economic sustain of the government. Something new under the sun. Looking for alternate solutions for air-conditioning. A photovoltaic project for developing countries. The solar absorption improves the Banyuls wine. A thermal solar collector for the production of sanitary hot water in Ile-de-France; Dossier energies renouvelables. Les premices d'un mouvement dans le batiment. Des evolutions marquantes presentees a ISH 2001. Un developpemnt encore lie au soutien economique de l'etat. Du nouveau sous le soleil. A la recherche de solutions alternatives pour la climatisation. Un projet photovoltaique pour les pays en voie de developpement. L'absorption solaire bonifie le banyuls. Un capteur solaire thermique pour l'ECS en Ile-de-France

    Energy Technology Data Exchange (ETDEWEB)

    Sappa, F.; Grumel, N.; Haentjens, H.

    2001-07-01

    The fight against greenhouse gas emissions implies to favor the development and use of renewable energies and to reduce the consumption of fossil fuels. The professionals of the building trade are of course concerned by such actions but unfortunately only few space heating/cooling or air-conditioning installations use renewable energies. In France, only one solar absorption air-conditioning installation exists (at Banyuls, Pyrenees Orientales) and the Bordeaux airport is one of the only buildings supplied with a tri-generation unit. This dossier makes a prospective analysis of the existing techniques that would be used in tomorrow's air-conditioning. It comprises 8 articles dealing with: the early beginnings of the use of renewable energies in the building trade and the inventory of existing techniques: solar thermal, cogeneration, tri-generation (electricity, heat and coldness), fuel cells (electrochemical reaction); the outstanding products presented at Frankfurt during the 2001 edition of the ISH exhibition (absorption heat pumps, heat pump with zeolite and water as refrigerant, solar heaters, hybrid systems, condensation boilers, fuel cells..); the bad competitiveness of renewable energies and the necessary financial sustain of the government; the start-up of the 'sun plan' program by the French agency of environment and energy mastery (Ademe) for the development of solar thermal energy in the residential sector; the 'know-how technical notes' edited by the scientific and technical committee of environment industries (Costic) for the development of low energy consumption air-conditioning processes (dry cooling, evaporation cooling, recovery of heat losses etc..); the project of development of photovoltaic cooling systems for developing countries (evaporative cooling or buried pipes); the unique French solar wine ageing cellar of Banyuls (3500 m{sup 2}, 15000 m{sup 3}, 3 levels); the thermal solar collector of the Quality Hotel of Rosny-sous

  11. Measurement of the local void fraction in two-phase air-water flow with a hot-film anemometer; Mesure du taux de vide local en ecoulement diphasique eau-air par un anemometre a film chaud

    Energy Technology Data Exchange (ETDEWEB)

    Delhaye, J. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1968-07-01

    The experimental knowledge of the local void-fraction is basic for the derivation of the constitutive equations of two-phase flows. This report deals with measurements of the local void-fraction based on the use of a constant temperature hot-film anemometer associated with a multichannel analyser. After determining the void-fraction profile along a diameter of a vertical pipe (40 mm I.D.), in which air and water flow upwards, we compare the void-fraction averaged over the diameter with the average value measured directly by a {gamma}-ray method. Two runs were made in bubble flow and a third in slug flow. The two methods give results in a good agreement especially for bubble flow. The void-fraction averaged over the cross-section was also calculated from the different profiles and compared in a good manner with the experimental results of R. ROUMY. For bubble flow we verified the theory of S.G. BANKOFF about the shape of the void-fraction profiles. (author) [French] Nous proposons une methode de mesure du taux de vide local a en ecoulement diphasique, basee sur l'emploi d'un anemometre a film chaud a temperature constante dont on etudie la repartition du signal en amplitude dans un analyseur multicanaux. Ayant trace un profil de taux de vide local suivant un diametre d'une conduite verticale de section circulaire parcourue par un ecoulement ascendant d'eau et d'air, nous avons compare la moyenne de {alpha} sur ce diametre a la valeur obtenue par une methode d'absorption de rayons {gamma}. Les essais ont ete faits en ecoulements a bulles et a bouchons. Les deux methodes donnent des resultats concordants en particulier pour les ecoulements a bulles. Le taux de vide moyenne dans la section, calcule a partir des differents profils, a egalement ete compare avec succes aux resultats experimentaux de R. ROUMY. Dans l'etude de la structure radiale des ecoulements a bulles, nous avons verifie l'hypothese de S.G. BAJMKOFF. (auteur)

  12. Structure of two-phase air-water flows. Study of average void fraction and flow patterns; Structure des ecoulements diphasiques eau-air. Etude de la fraction de vide moyenne et des configurations d'ecoulement

    Energy Technology Data Exchange (ETDEWEB)

    Roumy, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    This report deals with experimental work on a two phase air-water mixture in vertical tubes of different diameters. The average void fraction was measured in a 2 metre long test section by means of quick-closing valves. Using resistive probes and photographic techniques, we have determined the flow patterns and developed diagrams to indicate the boundaries between the various patterns: independent bubbles, agglomerated bubbles, slugs, semi-annular, annular. In the case of bubble flow and slug flow, it is shown that the relationship between the average void fraction and the superficial velocities of the phases is given by: V{sub sg} = f(<{alpha}>) * g(V{sub sl}). The function g(V{sub sl}) for the case of independent bubbles has been found to be: g(V{sub sl}) = V{sub sl} + 20. For semi-annular and annular flow conditions; it appears that the average void fraction depends, to a first approximation only on the ratio V{sub sg}/V{sub sl}. (author) [French] Ce rapport est une etude experimentale d'un melange diphasique eau-air dans des tubes verticaux de differents diametres. Nous avons mesure la fraction de vide moyenne dans une portion de canal de longueur 2 m, au moyen d'un systeme de vannes a fermeture rapide et simultanee. Au moyen de sondes resistives et de photographies nous avons determine la configuration de l'ecoulement et trace des cartes donnant les frontieres entre les differentes configurations d'ecoulement: bulles independantes, bulles agglomerees, bouchons, semi-annulaire, annulaire. Nous montrons que pour les regimes a bulles et a bouchons, une equation de la forme V{sub sg} = f(<{alpha}>) * g(V{sub sl}) relie la fraction de vide moyenne aux vitesses superficielles de chacune des phases. Nous avons pu determiner la fonction g(V{sub sl}) dans le cas du regime a bulles independantes, et nous trouvons g(V{sub sl}) = V{sub sl} + 20. Pour les regimes semi-annulaire et annulaire, il semble qu'en premiere approximation, la fraction de vide moyenne ne depende que

  13. Measurement of the local void fraction in two-phase air-water flow with a hot-film anemometer; Mesure du taux de vide local en ecoulement diphasique eau-air par un anemometre a film chaud

    Energy Technology Data Exchange (ETDEWEB)

    Delhaye, J [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1968-07-01

    The experimental knowledge of the local void-fraction is basic for the derivation of the constitutive equations of two-phase flows. This report deals with measurements of the local void-fraction based on the use of a constant temperature hot-film anemometer associated with a multichannel analyser. After determining the void-fraction profile along a diameter of a vertical pipe (40 mm I.D.), in which air and water flow upwards, we compare the void-fraction averaged over the diameter with the average value measured directly by a {gamma}-ray method. Two runs were made in bubble flow and a third in slug flow. The two methods give results in a good agreement especially for bubble flow. The void-fraction averaged over the cross-section was also calculated from the different profiles and compared in a good manner with the experimental results of R. ROUMY. For bubble flow we verified the theory of S.G. BANKOFF about the shape of the void-fraction profiles. (author) [French] Nous proposons une methode de mesure du taux de vide local a en ecoulement diphasique, basee sur l'emploi d'un anemometre a film chaud a temperature constante dont on etudie la repartition du signal en amplitude dans un analyseur multicanaux. Ayant trace un profil de taux de vide local suivant un diametre d'une conduite verticale de section circulaire parcourue par un ecoulement ascendant d'eau et d'air, nous avons compare la moyenne de {alpha} sur ce diametre a la valeur obtenue par une methode d'absorption de rayons {gamma}. Les essais ont ete faits en ecoulements a bulles et a bouchons. Les deux methodes donnent des resultats concordants en particulier pour les ecoulements a bulles. Le taux de vide moyenne dans la section, calcule a partir des differents profils, a egalement ete compare avec succes aux resultats experimentaux de R. ROUMY. Dans l'etude de la structure radiale des ecoulements a bulles, nous avons verifie l'hypothese de S.G. BAJMKOFF. (auteur)

  14. Faulting mechanisms and stress regime at the European HDR site of Soultz-sous-Forets, France

    International Nuclear Information System (INIS)

    Cuenot, Nicolas; Charlety, Jean; Haessler, Henri; Dorbath, Louis

    2006-01-01

    The state of stress and its implications for shear on fault planes during fluid injection are crucial issues for the HDR (Hot Dry Rock) or EGS (Enhanced or Engineered Geothermal System) concept. This is especially true for hydraulic stimulation experiments, aimed at enhancing the connectivity of a borehole to the natural fracture network, since they tend to induce the shearing of fractures, which is controlled by the local stress regime. During the 2000 and 2003 stimulation tests at Soultz-sous-Forets, France, about 10,000 microearthquakes were located with a surface seismological network. Hundreds of double-couple (DC) focal mechanisms were automatically determined from first-motion polarities using the FPFIT program [Reasenberg, P.A., Oppenheimer, D., 1985. FPFIT, FPPLOT and FPPAGE: Fortran computer programs for calculating and displaying earthquake fault-plane solutions. US Geological Survey Open-File Report 85-739, 25 pp.]. The majority of these mechanisms indicate normal-faulting movement with a more or less pronounced strike-slip component. Some quasi-pure strike-slip events also occurred, especially in the deeper part of the stimulated rock volume, at more than 5 km depth. Although we found a double-couple solution for all events, we tried to observe and quantify the proportion of the non-double-couple (NDC) component in the seismic moment tensor for several microseisms from the 2003 data. The study shows that the NDC is higher for the events in the vicinity of the injection well than for the events far from the well. We used the method of Rivera and Cisternas [Rivera, L., Cisternas, A., 1990. Stress tensor and fault-plane solutions for a population of earthquakes. Bull. Seismol. Soc. Am. 80, 600-614.] to perform the inversion of the deviatoric part of the stress tensor from P-wave polarities. This method was applied to different datasets from the 2000 test, taken from the shallower and deeper parts of the stimulated region. The results show a stable

  15. Faulting mechanisms and stress regime at the European HDR site of Soultz-sous-Forets, France

    Energy Technology Data Exchange (ETDEWEB)

    Cuenot, Nicolas; Charlety, Jean; Haessler, Henri [Institut de Physique du Globe de Strasbourg, Ecole et Observatoire des Sciences de la Terre (IPGS-EOST), 5 rue Rene Descartes, 67084 Strasbourg Cedex (France); Dorbath, Louis [Institut de Physique du Globe de Strasbourg, Ecole et Observatoire des Sciences de la Terre (IPGS-EOST), 5 rue Rene Descartes, 67084 Strasbourg Cedex (France); Institut de Recherche pour le Developpement, Laboratoire des Mecanismes et Transferts en Geologie (IRD, LMTG), 14 Avenue Edouard Belin, 31400 Toulouse (France)

    2006-10-15

    The state of stress and its implications for shear on fault planes during fluid injection are crucial issues for the HDR (Hot Dry Rock) or EGS (Enhanced or Engineered Geothermal System) concept. This is especially true for hydraulic stimulation experiments, aimed at enhancing the connectivity of a borehole to the natural fracture network, since they tend to induce the shearing of fractures, which is controlled by the local stress regime. During the 2000 and 2003 stimulation tests at Soultz-sous-Forets, France, about 10,000 microearthquakes were located with a surface seismological network. Hundreds of double-couple (DC) focal mechanisms were automatically determined from first-motion polarities using the FPFIT program [Reasenberg, P.A., Oppenheimer, D., 1985. FPFIT, FPPLOT and FPPAGE: Fortran computer programs for calculating and displaying earthquake fault-plane solutions. US Geological Survey Open-File Report 85-739, 25 pp.]. The majority of these mechanisms indicate normal-faulting movement with a more or less pronounced strike-slip component. Some quasi-pure strike-slip events also occurred, especially in the deeper part of the stimulated rock volume, at more than 5 km depth. Although we found a double-couple solution for all events, we tried to observe and quantify the proportion of the non-double-couple (NDC) component in the seismic moment tensor for several microseisms from the 2003 data. The study shows that the NDC is higher for the events in the vicinity of the injection well than for the events far from the well. We used the method of Rivera and Cisternas [Rivera, L., Cisternas, A., 1990. Stress tensor and fault-plane solutions for a population of earthquakes. Bull. Seismol. Soc. Am. 80, 600-614.] to perform the inversion of the deviatoric part of the stress tensor from P-wave polarities. This method was applied to different datasets from the 2000 test, taken from the shallower and deeper parts of the stimulated region. The results show a stable

  16. Traduction audiovisuelle : quand le sous-titrage à destination des personnes sourdes et malentendantes se rencontrent dans le film "Le Prénom"

    OpenAIRE

    Horii, Anaïk

    2015-01-01

    La traduction audiovisuelle est riche en méthodes de traduction : doublage, voice over, sur-titrage, audiodescription, etc. Ce mémoire se concentre sur la méthode du sous-titrage ainsi que sur celle du sous-titrage à destination des personnes sourdes et malentendantes. Le but était de comparer ces deux méthodes de traduction interlinguistique (dans les deux cas pour un public germanophone) en s'attardant sur les références culturelles ainsi que sur les langages populaire, familier et argotiqu...

  17. Doping ve fitness a rekreační sport : obsahová analýza českých videí na YouTube

    OpenAIRE

    Miček, Jakub

    2016-01-01

    Bibliografický záznam MIČEK, Jakub. Doping ve fitness a rekreační sport: obsahová analýza českých videí na YouTube. Praha, 2016. 48 s. Bakalářská práce (Bc.) Univerzita Karlova. Fakulta sociálních věd, Institut sociologických důvodů. Katedra sociologie. Vedoucí bakalářské práce PhDr. Mgr. Jan Balon, Ph.D. Abstract Fitness and YouTube are very popular areas of entertainment these days. Despite the touchiness of this topic, there are many videos about doping being published on YouTube. Majority...

  18. The leakage problem in vacuum system. Realization of a mass spectrometer detecting leaks; Le probleme des fuites en technique du vide. Realisation d'un spectrometre de masse detecteur de fuite

    Energy Technology Data Exchange (ETDEWEB)

    Geller, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1954-11-15

    In the first part of this paper we consider the problem of leaks in vacuum systems, and their detection. We consider in particular the method of detection by means of a helium spectrometer. The second part deals with the experimental set p. The analyser and the ion source have been studied in great detail, and we have also discussed the technological and mechanical aspects of the apparatus and its performances. (author) [French] Dans la premiere partie de ce travail, nous traitons le probleme des fuites en technique du vide et leur detection en general. La methode de detection par spectrometre a helium y est envisagee plus particulierement. La deuxieme partie de l'article est consacree a la realisation du spectrometre. Le tube analyseur et la source d'ions y sont etudies en detail. Nous exposons de meme les conceptions technologiques et mecaniques de l'appareil ainsi que ses performances. (auteur)

  19. The Subcritical Assembly for High-Temperature Use; Assemblage Sous-Critique Pour Emploi a Haute Temperature; K voprosu o podkriticheskoj sborke dlya ispol'zovaniya pri vysokikh temperaturakh; Conjunto Subcritico para Temperatura Elevada

    Energy Technology Data Exchange (ETDEWEB)

    Sakurai, Y.; Sekiya, T.; Suita, T. [Osaka University (Japan); Hishida, H.; Hamada, H.; Nagashima, K. [Sumitomo Atomic Energy Industries Group (Japan)

    1964-04-15

    intended to study the influence of high temperature upon the reactor parameters. (author) [French] Les assemblages sous-critiques sont a uranium naturel et a graphite. L'assemblage qui fait l'objet du memoire est caracterise par une partie a haute temperature qui peut etre placee au centre d'assemblages a basse temperature, et peut fournit des renseignements a la fois pour le futur reacteur a haute temperature refroidi par un gaz et pour la conversion directe de l'energie d'un milieu gazeux a haute temperature en electricite. En outre, il est prevu qu'il sera utilise pour renseignement. L'assemblage a ete place dans une structure de 2 x 2 x 3 m, composee de manchons en graphite de barres carrees de 10 cm de cote. La partie a haute temperature, de 1 m3, est chauffee par effet Joule et peut etre maintenue a une temperature de 2000 Degree-Sign C. Pour la partie a basse temperature, on utilise comme combustible des pastilles d'UO{sub 2} , et pour la partie , a haute temperature, des pastilles d'UC{sub 2}. Le combustible est introduit dans les manchons en graphite de barres de section carree. Les sources Am-Be de 5 c sont placees sous le socle fixe a la base des assemblages; d'autre part, les neutrons puises sont injectes dans l'assemblage a un point pris arbitrairement. La cible placee a l'extremite d'un tube branche sur un accelerateur est bombardee par un faisceau de deutons. Les connexions du dispositif de chauffage par effet Joule sont refroidies a l'eau et l'ensemble de la surface des parios de la partie a haute temperature a l'helium. Les circuits d'helium a haute temperature sont concus de maniere a servir pour les travaux de recherche relatifs a la conversion directe. Ces assemblages sont equipes d'appareils de controle et de mesure comparables a ceux dont sont dotes les petits reacteurs nucleaires. L'auteur met au point une methode experimentale de determination du laplacien du systeme; il a cherche quelle est la meilleure disposition pour la source de neutrons puises

  20. Consumer acceptability and sensory profile of cooked broccoli with mustard seeds added to improve chemoprotective properties.

    Science.gov (United States)

    Ghawi, Sameer Khalil; Shen, Yuchi; Niranjan, Keshavan; Methven, Lisa

    2014-09-01

    Broccoli, a rich source of glucosinolates, is a commonly consumed vegetable of the Brassica family. Hydrolysis products of glucosinolates, isothiocyanates, have been associated with health benefits and contribute to the flavor of Brassica. However, boiling broccoli causes the myrosinase enzyme needed for hydrolysis to denature. In order to ensure hydrolysis, broccoli must either be mildly cooked or active sources of myrosinase, such as mustard seed powder, can be added postcooking. In this study, samples of broccoli were prepared in 6 different ways; standard boiling, standard boiling followed by the addition of mustard seeds, sous vide cooking at low temperature (70 °C) and sous vide cooking at higher temperature (100 °C) and sous vide cooking at higher temperature followed by the addition of mustard seeds at 2 different concentrations. The majority of consumers disliked the mildly cooked broccoli samples (70 °C, 12 min, sous vide) which had a hard and stringy texture. The highest mean consumer liking was for standard boiled samples (100 °C, 7 min). Addition of 1% mustard seed powder developed sensory attributes, such as pungency, burning sensation, mustard odor, and flavor. One cluster of consumers (32%) found mustard seeds to be a good complement to cooked broccoli; however, the majority disliked the mustard-derived sensory attributes. Where the mustard seeds were partially processed, doubling the addition to 2% led to only the same level of mustard and pungent flavors as 1% unprocessed seeds, and mean consumer liking remained unaltered. This suggests that optimization of the addition level of partially processed mustard seeds may be a route to enhance bioactivity of cooked broccoli without compromising consumer acceptability. © 2014 Institute of Food Technologists®

  1. Underground disposal of tanks containing liquid and inflammable hydrocarbons; Mise sous talus ou sous terre des reservoirs contenant des hydrocarbures liquides inflammables

    Energy Technology Data Exchange (ETDEWEB)

    Kukuczka, P.; Giovannini, B.; Caumont, M.; Varin, F

    2001-09-15

    The protection from thermal and mechanical stresses, of hazardous products tanks, by earth covering, is often used since many years in France and in many countries of Europe. In the case of hydrocarbons tanks, only small capacity tanks are covering. The aim of this report is to evaluate the feasibility of this technique for big capacity tanks as refinery tanks. It details the different typologies of tanks containing inflammable liquids and the associated systems, examines if the covering technique presents some special difficulties and precises the specifications needed for the new tanks being covering. (A.L.B.)

  2. Les images en géographie sous l’angledes humanités numériques

    Directory of Open Access Journals (Sweden)

    Gaëlle Hallair

    2009-04-01

    Full Text Available L’article présente une méthodologie pour conserver, stocker, inventorier, archiver, numériser, indexer, valoriser et diffuser des archives géographiques sous l’angle des Digital humanities. L’article applique cette méthodologie aux images en géographie avant de présenter un projet de plate-forme documentaire concernant les plaques de verres du fonds Emmanuel de Martonne hébergées actuellement par l’UMR CNRS 8586 PRODIG.This article points out the methodology of Digital humanities to preserve, to stock, to make an inventory, to digitize, to index, to enhance the value und to spread geographical archives. It applies this methodology to geographical visual documents and presents a database project about photographic plates of the Emmanuel de Martonne’s collection localised in the research center PRODIG (UMR CNRS 8586.

  3. Lille, place financière intermédiaire sous la Révolution et l’Empire

    OpenAIRE

    De Oliveira, Matthieu

    2011-01-01

    Dernière grande place négociante et financière avant la frontière septentrionale, Lille joue pleinement son rôle d’intermédiaire entre les marchés parisiens au Sud et belgo-hollandais au Nord sous la Révolution et l’Empire. La déclaration de guerre en 1792 puis la départementalisation des territoires conquis ne font que renforcer la position nodale des acteurs économiques et financiers de la place. Au premier rang d’entre eux, François Briansiaux mobilise efficacement son important réseau de ...

  4. La sous-traitance au Brésil : un phénomène à la fois ancien et nouveau Subcontracting in Brazil: a phenomenon both new and old La subcontratación en Brasil : un fenómeno antiguo y nuevo a la vez

    Directory of Open Access Journals (Sweden)

    Graça Druck

    2009-05-01

    Full Text Available L’objectif de l’article est de discuter la sous-traitance aujourd’hui au Brésil. Nous discutons dans l’article le processus de flexibilisation et de précarisation du travail au Brésil, en prenant comme objet d’étude la sous-traitance, en tant qu’une des principales politiques de gestion et d’organisation du travail dans le cadre de la restructuration productive. Nous présentons une synthèse du processus de sous-traitance observé ces dernières années dans le pays, sous ses anciennes et nouvelles modalités, et nous analysons les résultats empiriques récents sur la sous-traitance dans des entreprises industrielles à haut risque pour l’environnement et la santé des travailleurs, dans la Région Métropolitaine de Salvador/Bahia/Brésil, de même que nous indiquons les principales de formes de résistance et de contre-pouvoirs construits contre la précarisation du travail et la sous-traitance.The purpose of the article is to discuss current subcontracting in Brazil. Our study subject « subcontracting as one of the main work management and organization policies in the framework of productive restructurings » used to discuss the work flexilibization and precarization process in Brazil. We present a synthesis of the subcontracting process observed in recent years in this country, under its old and new conditions, and we analyze the recent empirical results on subcontracting in industrial enterprises at high risk to the environment and workers’ health, in the metropolitan region of Salvador/Bahia, Brazil. We also identify the main forms of resistance and the counterbalances developed against work precarization and subcontracting.El objetivo de este artículo es discutir la tercerización en el Brasil contemporáneo. Se discute el proceso de flexibilización y de precarización del trabajo en Brasil, tomando como objeto de estudio la subcontratación como una de las principales políticas de gestión y de organizaci

  5. Comportement des fondations et des ancrages de structures marines sous l'effet de sollicitations cycliques Behavior of Foundations and Anchors for Marine Structures under the Effect of Cyclic Stresses

    Directory of Open Access Journals (Sweden)

    Le Tirant P.

    2006-11-01

    Full Text Available L'exploration et l'exploitation des hydrocarbures en haute mer conduisent à la mise en place d'ouvrages fixes ou flottants de dimensions de plus en plus colos sales, par des profondeurs d'eau sans cesse croissantes, atteignant actuellement 200 à 300 mètres en production, un millier de mètres en exploration. Les fondations des ouvrages pétroliers de production comprennent essentiel-lement- les pieux ou groupes de pieux, battus ou forés; - les fondations superficielles à embase poids. Le comportement des fondations ou ancrages de structures sous l'action des sollicitations cycliques est étudié, en fonction de la nature des terrains, à partir - de mesures et d'observations sur des structures réelles; d'expérimentations sur des modèles en semi-grandeur ou de simulations sur modèles réduits. Les exemples donnés situent la diversité des problèmes rencontrés pour l'instal-lation des ouvrages en haute mer et! l'ampleur des travaux nécessaires pour décrire plus correctement les phénomènes d'intéraction sols-structures mannes sous l'effet des chargements cycliques et transitoires et, par suite, mieux optimiser le dimensionnement des fondations et des ancrages. Exploration and production of hydrocarbons in the high seas lead ta the installation of fixed or floating structures having more and more colossal sizes at constantly increasing water depths which now attain 200 ta 300 meters for production and 1000 meters for exploration. The foundations of ail production structures mainly consist of - pilings or groups of pilings, either driven or drilled; superficial gravity foundations the behovior of foundations or anchors for such structures under the effect of cyclic stresses is examined as a function of the nature of formations, on the basis of - measurements and observations on actual structures, experiments with semi-full-sized models or by simulations with scale models. The examples given illustrate the diversity of the problems

  6. Numerical modeling of the impact of temperature on the behavior of minerals in the Soultz-sous-Forêts enhanced geothermal system

    Science.gov (United States)

    Van Ngo, Viet; Lucas, Yann; Clément, Alain; Fritz, Bertrand

    2015-04-01

    Operation of the enhanced geothermal system (EGS) requires to re-inject fluid, after heat exchange at the surface to the energy production, into the geothermal reservoir. This cold re-injected fluid can cause a strong disequilibrium with the fluid and granitic rock within the geothermal reservoir and then implies the possible dissolution/precipitation of minerals. The hydrothermal alterations include the transformation of plagioclase, biotite and K-feldspar and the precipitation of various secondary minerals. The major sealing phases observed in the main fracture zones are quartz, calcite, and clay minerals. These mineralogical transformations may modify the porosity, permeability and fluid pathways of the geothermal reservoir. In the Soultz-sous-Forêts EGS (Alsace, France), the hydraulic connection between the injection well and the production well is quite poor. Therefore, understanding the impact of changes in temperature, which are caused by the re-injected fluid, on the behavior of minerals (especially for the main newly-formed minerals such as quartz, calcite and clay minerals) is a critical preliminary step for the long-term prediction of their evolution. The approach used in the present work is typically based on a geochemical code, called THERMA, which enables to calculate the changes in equilibrium constants of all primary and secondary minerals and aqueous species as a function of temperature. Our model accounted for a wide range of different mineral groups in order to make sure a large freedom for the numerical calculations. The modeling results showed that when the temperature of geothermal reservoir is cooled down, quartz, calcite, illites, galena and pyrite have tendency towards equilibrium state, which indicates that they are precipitated under the geothermal conditions. In contrast, other minerals including plagioclase, K-feldspar and biotite remained unsaturated. These behaviors of minerals were further illustrated by the Khorzinsky stability

  7. Darba vides riski farmācijas pētniecības laboratorijās, aizsardzības un preventīvie pasākumi

    OpenAIRE

    Veidemane, Agnese

    2017-01-01

    „Darba vides riski farmācijas pētniecības laboratorijās, aizsardzības un preventīvie pasākumi”. Darba autore: A.Veidemane. Darba zinātniskais vadītājs: prof. Dr. chem. A.Vīksna. Maģistra darbs izklāstīts uz 100 lpp., ietver 51 attēlus, 19 tabulas, 80 literatūras avotus, 18 pielikumus. Pētījums sastāv no trīs daļām. Pirmajā daļā ir apkopota un analizēta literatūra par izplatītākajiem riskiem farmācijas pētniecības laboratorijās, aplūkota to ietekme uz veselību un nodarbināto darbspējām. Darb...

  8. PH measurement under pressure and at high temperatures; Mesure du pH sous pression et a temperature elevee

    Energy Technology Data Exchange (ETDEWEB)

    Fournie, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Le Peintre, M; Mahieu, C [Centre National de la Recherche Scientifique (CNRS), 91 - Gif-sur-Yvette (France)

    1961-07-01

    In the first part the development and operation of a glass electrode under pressure at room temperature is described. The pressure equilibrium between the inside and outside of the glass membrane several centimetres thick is obtained instantaneously by means of a siphon. The use of a silicone oil as electrical insulator makes possible the working of the glass electrode with the siphon at high pressures (100 kg/cm{sup 2}). In the second part, we determined the pH of various buffer solutions up to 250 deg. C using a cell of our design having two hydrogen electrodes. The values thus obtained for the buffer solutions make it possible to verify and calibrate the pH electrodes independently of the oxido-reduction potential of the medium. In the third part we give the results obtained up to 200 deg. C with the glass electrodes developed in conjunction with the Societe St Gobain. (author) [French] Dans une premiere partie, nous exposons la mise au point et le fonctionnement d'une electrode en verre sous pression a la temperature ordinaire. L'equilibrage instantane de la pression a l'interieur et a l'exterieur de la membrane en verre de quelques diziemes de millimetres d'epaisseur s'effectue par l'intermediaire d'un siphon. L'emploi d'une huile de silicone comme isolant electrique a permis le fonctionnement de l'electrode en verre a siphon sous haute pression (1000 kg/cm{sup 2}). Dans une deuxieme partie, nous avons determine jusqu'a 250 deg. C les valeurs du pH des diverses solutions tampons avec une cellule de notre conception a deux electrodes d'hydrogene. Les valeurs des solutions tampons ainsi obtenues permettent de verifier et d'etalonner les electrodes a pH independantes du potentiel d'oxydo-reduction du milieu. Dans une troisieme partie, nous relatons les resultats obtenus jusqu'a 200 deg. C avec les electrodes en verre mis au point en collaboration avec la Societe Saint-Gobain. (auteur)

  9. Measurements for uranium-light water subcritical assembly; Mesures pour ensemble sous-critique uranium-eau legere d'enseignement

    Energy Technology Data Exchange (ETDEWEB)

    Barre, J Y [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-07-01

    The aim of this report is to determine the matter Laplacian of a subcritical assembly, done for educational purposes, using natural uranium combustible and light water for the moderator and the reflector. (M.B.) [French] L'objet de ce rapport est la determination du Laplacien matiere d'un reseau sous-critique, destine a l'enseignement, utilisant comme combustible l'uranium naturel et comme moderateur et reflecteur l'eau naturelle. (M.B.)

  10. A comparison of the retention of vitamins B1, B2 and B6, and cooking yield in pork loin with conventional and enhanced meal-service systems

    DEFF Research Database (Denmark)

    Lassen, Anne Dahl; Kall, M.; Hansen, K.

    2002-01-01

    processing included warm-holding, conventional cook-chill, modified atmosphere packaging (MAP) and sous vide. Compared to retention in the freshly cooked samples, vitamin B-2 retention remained unaffected, irrespective of the meal-service system used and storage period. As regards vitamin B-1 and vitamin B-6......, retentions declined significantly, by 14% and 21% respectively during 3 h of warm-holding, and by 11% and 19% respectively after 1 day of storage and subsequent reheating (cook-chill, MAP and sous vide). Vitamin B-1 retention declined by an extra 4% during storage for 14 days (sous vide) (not significant...

  11. Contribution of the Surface and Down-Hole Seismic Networks to the Location of Earthquakes at the Soultz-sous-Forêts Geothermal Site (France)

    Science.gov (United States)

    Kinnaert, X.; Gaucher, E.; Kohl, T.; Achauer, U.

    2018-03-01

    Seismicity induced in geo-reservoirs can be a valuable observation to image fractured reservoirs, to characterize hydrological properties, or to mitigate seismic hazard. However, this requires accurate location of the seismicity, which is nowadays an important seismological task in reservoir engineering. The earthquake location (determination of the hypocentres) depends on the model used to represent the medium in which the seismic waves propagate and on the seismic monitoring network. In this work, location uncertainties and location inaccuracies are modeled to investigate the impact of several parameters on the determination of the hypocentres: the picking uncertainty, the numerical precision of picked arrival times, a velocity perturbation and the seismic network configuration. The method is applied to the geothermal site of Soultz-sous-Forêts, which is located in the Upper Rhine Graben (France) and which was subject to detailed scientific investigations. We focus on a massive water injection performed in the year 2000 to enhance the productivity of the well GPK2 in the granitic basement, at approximately 5 km depth, and which induced more than 7000 earthquakes recorded by down-hole and surface seismic networks. We compare the location errors obtained from the joint or the separate use of the down-hole and surface networks. Besides the quantification of location uncertainties caused by picking uncertainties, the impact of the numerical precision of the picked arrival times as provided in a reference catalogue is investigated. The velocity model is also modified to mimic possible effects of a massive water injection and to evaluate its impact on earthquake hypocentres. It is shown that the use of the down-hole network in addition to the surface network provides smaller location uncertainties but can also lead to larger inaccuracies. Hence, location uncertainties would not be well representative of the location errors and interpretation of the seismicity

  12. Microfracture pattern compared to core-scale fractures in the borehole of Soultz-sous-Forets granite, Rhine graben, France

    Energy Technology Data Exchange (ETDEWEB)

    Dezayes, C.; Villemin, T. [Universite de Savoie (France). Laboratoire de Geodynamique des Chaines Alpines, UPRES-A CNRS 5025; Pecher, A. [Universite Joseph Fourier, Grenoble (France). Laboratoire de Geodynamique des Chaines Alpines, UPRES-A CNRS 5025

    2000-07-01

    Microfractures appearing in thin section as fluid inclusion trails in quartz crystals were studied in four core samples of Soultz-sous-Forets granite. Their orientations in four series of three mutually perpendicular thin sections were estimated using a previously described apparent dip method and a new method involving measurements of strike and apparent dips. Three samples display three microfracture sets and one sample displays two sets. In all samples, one set is nearly vertical and strikes N-S. In two samples, one and two sets are nearly vertical and strike E-W. In two samples, two sets strike NW-SE: one is vertical, the other dips gently to the NE (or SW). Comparing microfracture and mesofractures sets in the same cores shows that (1) the N-S microfacture set is always dominant at both scales and (2) all other microfracture sets have no mesoscopic counterpart. The N-S microfracture sets could have been created during E-W extension of earliest Cenozoic age (Rhine Graben rifting). Differences between the two scales are explained by a {sigma}{sub 1}/{sigma}{sub 2} switching which occurred at the crystal scale and generated mutually perpendicular cracks.

  13. Industrial applications of radiation chemistry; Perspectives industrielles de la chimie sous rayonnement

    Energy Technology Data Exchange (ETDEWEB)

    Puig, Jean Rene [Commissariat a l' energie atomique et aux energies alternatives - CEA, Service de chimie-physique, CEN de Saclay (France)

    1959-07-01

    The status of industrial applications of radiation chemistry as it stands 6 months after the second Geneva international conference is described. The main features of the interaction of ionizing radiations with matter are briefly stated and a review is made of the best studied and the more promising systems of radiation chemistry. The fields of organics, plastics, heterogeneous catalysis are emphasized. Economies of radiation production and utilization are discussed. Reprint of a paper published in Industries atomiques - no. 5-6, 1959.

  14. Model Validation for Estimating the Leaf Stomatal Conductance in cv. Cabernet Sauvignon Grapevines Validación de un modelo para estimar la conductancia estomática de hojas en vides cv. Cabernet Sauvignon.

    Directory of Open Access Journals (Sweden)

    Francisco Jara-Rojas

    2009-03-01

    Full Text Available The coupled model of assimilation and stomatal conductance (A-g s was evaluated to estimate leaf stomatal conductance of a drip-irrigated vineyard (Vitis vinifera L. cv. Cabernet Sauvignon located in the Pencahue Valley (35º22’ S, 71°47’ W, 150 m.a.s.l., Maule Region, Chile, during the 2003-2004 and the 2004-2005 growing seasons. Additionally, a calibration of the three parameters mesophyll conductance (g m, maximum specific humidity (Dmax and coupled factor (f0 was applied on vines growing in 35 L pots. An infrared gas analyzer was used to calibrate and evaluate the A-g s which allowed simultaneous measuring of the leaf net CO2 assimilation (A and stomatal conductance (g s in 2 to 3 h intervals of time. The calibration indicated that the g m,, Dmax and f0 values were 1.15 mm s-1, 52.31 g kg-1 and 0.90, respectively. The validation in the drip-irrigated vineyard indicated that the A-g s model was able to estimate the leaf stomatal conductance with a root mean square error (RMSE of 0.05 mol m-2 s-1, model efficiency of 61% and agreement index of 90%. The sensitivity analysis indicated that the A-g s model is affected considerably by the g m, Dmax and f0 parameterization.Validación de un modelo para estimar la conductancia estomática de hojas en vides cv. Cabernet Sauvignon. El modelo acoplado de asimilación neta y conductancia estomática (A-g s fue evaluado para estimar la conductancia estomática de hojas (g s de un viñedo regado por goteo (Vitis vinifera L. cv. Cabernet Sauvignon ubicado en el Valle de Pencahue (35º22’ S; 71º47’ O; 150 m.s.n.m., Región del Maule, Chile, durante las temporadas 2003-2004 y 2004-2005. Además, se realizó una calibración de la conductancia del mesófilo (g m, valor máximo de humedad específica a saturación (Dmax y el factor acoplado (f0 en vides creciendo en maceteros de 35 L. Para calibrar y evaluar el modelo A-g s se utilizó un analizador infrarrojo de gases, el cual permitió medir simult

  15. Concentration and Storage of Highly-Active Wastes from the First Stages of the United Kingdom Civil Nuclear Power Programme; Concentration et Stockage des Dechets de Haute Activite au Cours des Premiers Stades du Programme Civil de Production d'Energie d'Origine Nucleaire au Royaume-UNL; КОНЦЕНТРИРОВАНИЕ И ХРАНЕНИЕ ВЫСОКОАКТИВНЫХ ОТХОДОВ НА ПЕРВЫХ СТАДИЯХ ОСУЩЕСТВЛЕНИЯ ПРОГРАММЫ СОЕДИНЕННОГО КОРОЛЕВСТВА ПО ПРОИЗВОДСТВУ ЯДЕPHОЙ ЭЛЕКТРОЭНЕРГИИ ДЛЯ ГРАЖДАНСКИХ ЦЕЛЕЙ; Concentracion y Almacenamiento de Desechos de Elevada Radiactividad en las Primeras Etapas del Programa Civil de Energia Nucleoelectrica del Reino Unido

    Energy Technology Data Exchange (ETDEWEB)

    Clelland, D. W. [United Kingdom Atomic Energy Authority, Production Group, Risley, Warrington (United Kingdom)

    1963-02-15

    The general problems of highly-active waste disposal are discussed and in particular the United Kingdom system of concentrating and storing highly-active waste as an acidic liquid concentrate is described. A speculative estimate is made of the amount of highly- active waste which will arise from reprocessing during the first two decades of the United Kingdom Civil Nuclear Power Programme and engineering design and technical problems associated with the safe and economic confinement of this material are examined. (author) [French] L'auteur analyse les problemes generaux que pose l'elimination des dechets de- haute activite; il decrit plus particulierement la methode appliquee au Royaume-Uni pour concentrer et stocker des dechets de haute activite sous forme d'un liquide concentre acide. U evalue la quantite des dechets de haute activite qui seront produits au cours du traitement de combustibles irradies pendant les deux premieres deconnies du programme civil de production d'energie d'orgine nucleaire et il examine les problemes techniques que pose l'isolement economique et sur de ces substances. (author) [Spanish] El autor examina los problemas generales de la evacuacion de desechos de elevada radiactividad y, en particular, el procedimiento que se aplica en el Reino Unido para concentrar y almacenar desechos muy radiactivos en forma de concentrados liquidos de reaccion acida. Efectua un calculo aproximado de la cantidad de desechos de elevada radiactividad que se orginaran en las operaciones de regeneracion de combustibles durante las dos primeras decadas de ejecucion del programa civil de energia nucleoelectrica en el Reino Unido y analiza los problemas tecnicos y constructivos relacionados con el confinamiento seguro y economico de estas sustancias. (author) [Russian] Obsuzhdajutsja obshhie problemy udalenija radioaktivnyh othodov vysokoj aktivnosti i, v chastnosti, prinjatyj v Soedinennom Korolevstve metod koncentrirovanija i hranenija takih othodov v vide

  16. Effets Seebeck et Nernst dans les cuprates: Etude de la reconstruction de la surface de Fermi sous champ magnetique intense

    Science.gov (United States)

    Laliberte, Francis

    2010-06-01

    Ce memoire presente des mesures de transport thermoelectrique, les effets Seebeck et Nernst, dans une serie d'echantillons de supraconducteurs a haute temperature critique. Des resultats obtenus recemment au Laboratoire National des Champs Magnetiques Intenses a Grenoble sur La1.7Eu0.2Sr0.1 CuO4, La1.675Eu0.2Sr0.125CuO 4, La1.64Eu0.2Sr0.16CuO4, La1.74Eu0.1Sr0.16CuO4 et La 1.4Nd0.4Sr0.2CuO4 sont analyses. Une attention particuliere est accordee aux equations de la theorie semi-classique du transport et leur validite est verifiee. La procedure experimentale et les materiaux utilises pour concevoir les montages de mesures sont expliques en detail. Enfin, un chapitre est dedie a l'explication et l'interpretation des resultats de transport thermoelectrique sur YBa2Cu3O6+delta publies au cours de l'hiver 2010 dans les revues Nature et Physical Review Letters. Les donnees d'effet Seebeck dans les echantillons de La 1.8-x,Eu0.2SrxCuO 4, ou un changement de signe est observe, permettent de conclure a la presence d'une poche d'electrons dans la surface de Fermi qui domine le transport a basse temperature dans la region sous-dopee du diagramme de phase. Cette conclusion est similaire a celle obtenue par des mesures d'effet Hall dans YBa 2Cu3O6+delta et elle cadre bien dans un scenario de reconstruction de la surface de Fermi. Les donnees d'effet Nernst recueillies indiquent que la contribution des fluctuations supraconductrices est limitee a un modeste intervalle de temperature au-dessus de la temperature critique.

  17. Contribution to the study of {sup 233}U production with MOX-ThPu fuel in PWR reactor. Transition scenarios towards Th/{sup 233}U iso-generating concepts in thermal spectrum. Development of the MURE fuel evolution code; Contribution a l'etude de la production d'{sup 233}U en combustible MOX-ThPu en reacteur a eau sous pression. Scenarios de transition vers des concepts isogenerateurs Th/{sup 233}U en spectre thermique. Developpement du code MURE d'evolution du combustible

    Energy Technology Data Exchange (ETDEWEB)

    Michel-Sendis, F

    2006-12-15

    If nuclear power is to provide a significant fraction of the growing world energy demand, only through the breeding concept can the development of sustainable nuclear energy become a reality. The study of such a transition, from present-day nuclear technologies to future breeding concepts is therefore pertinent. Among these future concepts, those using the thorium cycle Th/U-233 in a thermal neutron spectrum are of particular interest; molten-salt type thermal reactors would allow for breeding while requiring comparatively low initial inventories of U-233. The upstream production of U-233 can be obtained through the use of thorium-plutonium mixed oxide fuel in present-day light water reactors. This work presents, firstly, the development of the MURE evolution code system, a C++ object-oriented code that allows the study, through Monte Carlo (M.C.) simulation, of nuclear reactors and the evolution of their fuel under neutron irradiation. The M.C. methods are well-suited for the study of any reactor, whether it'd be an existing reactor using a new kind of fuel or a future concept altogether, the simulation is only dependent on nuclear data. Exact and complex geometries can be simulated and continuous energy particle transport is performed. MURE is an interface with MCNP, the well-known and validated transport code, that allows, among other functionalities, to simulate constant power and constant reactivity evolutions. Secondly, the study of MOX ThPu fuel in a conventional light water reactor (REP) is presented; it explores different plutonium concentrations and isotopic qualities in order to evaluate their safety characteristics. Simulation of their evolution allows us to quantify the production of U-233 at the end of burnup. Last, different french scenarios validating a possible transition towards a park of thermal Th/U-233 breeders, are presented. In these scenarios, U-233 is produced in ThPu moxed light water reactors. (author)

  18. Contribution to the study of {sup 233}U production with MOX-ThPu fuel in PWR reactor. Transition scenarios towards Th/{sup 233}U iso-generating concepts in thermal spectrum. Development of the MURE fuel evolution code; Contribution a l'etude de la production d'{sup 233}U en combustible MOX-ThPu en reacteur a eau sous pression. Scenarios de transition vers des concepts isogenerateurs Th/{sup 233}U en spectre thermique. Developpement du code MURE d'evolution du combustible

    Energy Technology Data Exchange (ETDEWEB)

    Michel-Sendis, F

    2006-12-15

    If nuclear power is to provide a significant fraction of the growing world energy demand, only through the breeding concept can the development of sustainable nuclear energy become a reality. The study of such a transition, from present-day nuclear technologies to future breeding concepts is therefore pertinent. Among these future concepts, those using the thorium cycle Th/U-233 in a thermal neutron spectrum are of particular interest; molten-salt type thermal reactors would allow for breeding while requiring comparatively low initial inventories of U-233. The upstream production of U-233 can be obtained through the use of thorium-plutonium mixed oxide fuel in present-day light water reactors. This work presents, firstly, the development of the MURE evolution code system, a C++ object-oriented code that allows the study, through Monte Carlo (M.C.) simulation, of nuclear reactors and the evolution of their fuel under neutron irradiation. The M.C. methods are well-suited for the study of any reactor, whether it'd be an existing reactor using a new kind of fuel or a future concept altogether, the simulation is only dependent on nuclear data. Exact and complex geometries can be simulated and continuous energy particle transport is performed. MURE is an interface with MCNP, the well-known and validated transport code, that allows, among other functionalities, to simulate constant power and constant reactivity evolutions. Secondly, the study of MOX ThPu fuel in a conventional light water reactor (REP) is presented; it explores different plutonium concentrations and isotopic qualities in order to evaluate their safety characteristics. Simulation of their evolution allows us to quantify the production of U-233 at the end of burnup. Last, different french scenarios validating a possible transition towards a park of thermal Th/U-233 breeders, are presented. In these scenarios, U-233 is produced in ThPu moxed light water reactors. (author)

  19. Metal extrusion using hydrostatic pressures; Le filage des metaux sous pression hydrostatique

    Energy Technology Data Exchange (ETDEWEB)

    Sauve, Ch [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The main problems connected with the deformation of metals due to extrusion are described. A method is put forward for calculating the rational rate of percentage deformation in the case of bar extrusion using a cylindrical container; reference is made to previous work on extrusion using a hydrostatic pressure with or without back-pressure. An extrusion process is described using hydrostatic pressure, without back-pressure, and using the lubricant for transmitting the thrust. This process has been used for eight years by the C.E.A. for the extrusion of a very wide range of metals, from beryllium to uranium and including steels; it leads to excellent surface textures. A very fine crystallization can be obtained on extruded products when the rate of extrusion is very low. There appears to be nothing against the use of high extrusion rates using this method. (author) [French] On expose les problemes generaux lies a la deformation des metaux par filage. On propose un calcul de la vitesse rationnelle de deformation pour cent dans le cas du filage de barres a partir d'un conteneur cylindrique, et l'on cite les travaux anterieurs sur le filage par faction d'une pression hydrostatique sans ou avec une contre-pression. On decrit un procede de filage par l'action d'une pression hydrostatique, sans contre-pression, utilisant le lubrifiant pour transmettre la poussee. Ce procede employe depuis 8 ans au C.E.A. pour filer les metaux les plus divers, depuis le beryllium jusqu'a l'uranium en passant par les aciers, permet d'obtenir d'excellents etats de surface. Une cristallisation tres fine peut etre obtenue sur les produits files lorsque le filage est tres lent. Rien ne parait s'opposer a ce que des filages rapides soient effectues avec cette methode. (auteur)

  20. Oxidation of steel heated in CO{sub 2} medium under pressure; Oxydation d'un acier ordinaire chauffe dans le gaz carbonique sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R.; Leclercq, D.; Bunard, C. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Behaviour of low-alloyed steels heated in CO{sub 2} medium under pressure is reported. Tests are carried out in the range of erature reached in the CO{sub 2} cooled reactors (vessel, thermal shield, pipes). The observed weight increases are small, even after more than a thousand hours of heating at 350 deg. C, but oxidation curve looks like progressing linearly. Furthermore, the oxide formed under a pressure of 15 kg/cm{sup 2} is undoubtedly more compact and adherent than the one formed under a pressure of 1 kg/cm{sup 2}. Finally, for practical use, CO{sub 2} steel pipes surface has to be sand blast and pickled. A following phosphatizing protects it from atmospheric corrosion during assembling, but these treatments have no influence on the behaviour of these steels heated in CO{sub 2}. (author)Fren. [French] On etudie le comportement d'aciers au carbone faiblement allies, chauffes dans le gaz carbonique sous pression, aux temperatures atteintes dans les reacteurs refroidis par ce gaz (caisson, bouclier thermique, canalisations). Les augmentations de poids observees sont faibles, meme apres plus de 1000 heures de chauffage a 350 deg. C, mais l'oxydation semble se poursuivre lineairement. De plus, l'oxyde forme dans le gaz carbonique sous pression de 15 kg/cm{sup 2} est nettement plus compact et adherent que celui forme sous pression atmospherique de gaz carbonique. Enfin, dans la pratique, les surfaces d'acier du circuit de gaz carbonique sont necessairement sablees ou decapees; une phosphatation ulterieure le protege de la corrosion atmospherique pendant le montage. Ces traitements sont sans influence sur le comportement de ces aciers dans le gaz carbonique a chaud. (auteur)

  1. Oxidation of steel heated in CO{sub 2} medium under pressure; Oxydation d'un acier ordinaire chauffe dans le gaz carbonique sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R; Leclercq, D; Bunard, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Behaviour of low-alloyed steels heated in CO{sub 2} medium under pressure is reported. Tests are carried out in the range of erature reached in the CO{sub 2} cooled reactors (vessel, thermal shield, pipes). The observed weight increases are small, even after more than a thousand hours of heating at 350 deg. C, but oxidation curve looks like progressing linearly. Furthermore, the oxide formed under a pressure of 15 kg/cm{sup 2} is undoubtedly more compact and adherent than the one formed under a pressure of 1 kg/cm{sup 2}. Finally, for practical use, CO{sub 2} steel pipes surface has to be sand blast and pickled. A following phosphatizing protects it from atmospheric corrosion during assembling, but these treatments have no influence on the behaviour of these steels heated in CO{sub 2}. (author)Fren. [French] On etudie le comportement d'aciers au carbone faiblement allies, chauffes dans le gaz carbonique sous pression, aux temperatures atteintes dans les reacteurs refroidis par ce gaz (caisson, bouclier thermique, canalisations). Les augmentations de poids observees sont faibles, meme apres plus de 1000 heures de chauffage a 350 deg. C, mais l'oxydation semble se poursuivre lineairement. De plus, l'oxyde forme dans le gaz carbonique sous pression de 15 kg/cm{sup 2} est nettement plus compact et adherent que celui forme sous pression atmospherique de gaz carbonique. Enfin, dans la pratique, les surfaces d'acier du circuit de gaz carbonique sont necessairement sablees ou decapees; une phosphatation ulterieure le protege de la corrosion atmospherique pendant le montage. Ces traitements sont sans influence sur le comportement de ces aciers dans le gaz carbonique a chaud. (auteur)

  2. Pulsed Source Measurements on a Uranium-Water Subcritical Assembly; Mesures Faites sur un Assemblage Sous- Critique Uranium-Eau Ordinaire a l'Aide d'une Source Pulsee; Izmereniya s pomoshch'yu istochnikov impul'snykh nejtronov na urano-vodnoi podkriticheskoi sborke; Mediciones con Fuentes Pulsantes en un Conjunto Subcritico Uranio-Agua

    Energy Technology Data Exchange (ETDEWEB)

    Gibson, I. H.; Walker, J. [Department of Physics, University of Birmingham, Birmingham (United Kingdom)

    1964-02-15

    An unreflected assembly of natural uranium and light water has been used in conjunction with a pulsed source of neutrons for decay-time measurements at different bucklings. Four different lattice pitches over the range 3.94 cm to 5.08 cm were obtained by using different pairs of accurately machined lattice plates and in each case the uranium was in the form of bars 109.8 cm long and 3.0 cm diameter. The fuel- was mounted horizontally and loadings up to approximately 6 t were involved. Spatial harmonics were eliminated or selected by appropriate placing of a small scintillation detector. Experimental results showing the dependence of decay constant on buckling are presented and compared with theoretical values. (author) [French] On a utilise conjointement un assemblage sans reflecteur uranium naturel-eau ordinaire et une source puisee en vue de mesurer le temps de decroissance pour differents laplaciens. - Plusieurs paires de plaques de reseau usinees avec precision ont permis d'adopter quatre differents pas de reseau allant de 3,94cm a 5,08 cm; dans chaque cas, l'uranium etait sous forme de barres de 109,8 cm de long et de 3,0 cm de diametre. Le combustible etait monte horizontalement et le chargement a atteint parfois jusqu'a pres de 6 t. Grace a un petit detecteur a scintillations convenablement place, on a pu eliminer les harmoniques spatiaux ou les selectionner. Les auteurs presentent des resultats d'experiences qui montrent les variations de la constante de desintegration en fonction du laplacien, et les comparent avec les valeurs theoriques. (author) [Spanish] Los autores utilizaron un conjunto de uranio natural y agua ligera, sin reflector, juntamente con una fuente neutronica pulsante, para efectuar determinaciones del tiempo de desintegracion en correspondencia con diferentes valores del laplaciano. En este conjunto se pueden establecer cuatro diferentes espaciamientos del reticulado, desde 3,94 cm hasta 5,08 cm. utilizando diferentes pares de placas de

  3. Vides y vinos de la antigua Grecia

    OpenAIRE

    Morala Fernández, Salustiano

    2017-01-01

    Introducción. Es suficientemente conocida hoy la importancia que llegó a adquirir el vino y su consumo en la vida cotidiana, social, económica y religiosa de la antigua Grecia. De ello tenemos cumplidas muestras en las fuentes escritas, de cualquiera de sus épocas, que han llegado hasta nosotros, bien sean fuentes puramente literarias, bien sean escritos médicos o agronómicos, o bien se trate de papiros o inscripciones. Pero también los descubrimientos arqueológicos (vasos, principalmente de ...

  4. Productivity

    DEFF Research Database (Denmark)

    Spring, Martin; Johnes, Geraint; Hald, Kim Sundtoft

    Productivity is increasingly critical for developed economies. It has always been important: as Paul Krugman puts it, “Productivity isn’t everything, but in the long run it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability...... to raise its output per worker”(Krugman, 1994). Analyses of productivity have, by and large, been the preserve of economists. Operations Management (OM) is rooted in a similar concern for the efficient use of scarce resources; Management Accounting (MA) is concerned with the institutionalised measurement...... and management of productivity. Yet the three perspectives are rarely connected. This paper is a sketch of a literature review seeking to identify, contrast and reconcile these three perspectives. In so doing, it aims to strengthen the connections between policy and managerial analyses of productivity....

  5. Oxidation of ordinary steels or alloys heated in carbon dioxide under pressure; Oxydation d'aciers ordinaires ou allies chauffes dans le gaz carbonique sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Leclercq, D; Chevilliard, C; Darras, R [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Selection tests were carried out on commercial steels from the viewpoint of their resistance to oxidation in carbon dioxide, under 25 atmospheres pressure, between 350 and 600 deg. C. Comparative curve of oxidation kinetics were obtained, from which the influence of various additive elements can be found; small amounts of aluminium particularly seem to be favourable in the case of only slightly alloyed steels. (author) [French] Des essais de selection d'aciers commerciaux ont ete effectues quant a leur resistance a l'oxydation dans le gaz carbonique, sous pression de 25 atmospheres, ente 350 et 600 deg. C. Des courbes comparatives de cinetique d'oxydation ont ete obtenues, ce qui permet de degager l'influence de divers elements d'addition; de faibles teneurs en aluminium apparaissent notamment favorables dans le cas des aciers peu allies. L'acier inoxydable 18-8 a egalement ete etudie, notamment sous forme de tubes minces. Son comportement est bon jusqu'au moins 600 deg. C dans ces conditions. (auteur)

  6. Méthode d'estimation des tassements des sols fins sous les remblais d'infrastructures ferroviaires pour lignes à grande vitesse

    Science.gov (United States)

    Said Alami, Soukaina; Reiffsteck, Philippe; Cuira, Fahd

    2018-02-01

    Le besoin de maîtriser les déformations des sols sous les remblais destinés à recevoir les structures de lignes à grande vitesse, en fait un enjeu important pour ces projets. Toutefois, de nombreuses difficultés ont été soulevées liées principalement au grand nombre d'incertitudes qui entourent le phénomène. En effet, la caractérisation géologique et géotechnique dépend de sondages et d'essais où le risque de remaniement est important et dont l'interprétation est, souvent, délicate. Cet article présente une procédure de calcul qui permettrait en pratique d'évaluer le tassement sous remblai avec une bonne précision et qui a été validée sur un certain nombre d'ouvrages. Pour cela, des corrections sont introduites aux méthodes usuelles de calcul permettant d'approcher les valeurs mesurées sur chantier.

  7. Intergranular Pressure Solution in Nacl: Grain-To-Grain Contact Experiments under the Optical Microscope Dissolution sous contrainte dans NaCl : expériences de contact grain à grain sous microscope optique

    Directory of Open Access Journals (Sweden)

    Spiers C. J.

    2006-12-01

    effective diffusivity varying with contact force and on-going convergence. The results agree broadly with those of previous compaction creep experiments performed using wet halite powder. Discrepancies with other workers results for single-contact dissolution experiments can be explained in terms of differences in experimental configuration and competition between driving forces. La dissolution sous contrainte (IPS - Intergranular Pressure Solution représente un mécanisme de lithification, de compaction et de déformation à l'échelle géologique pour une large gamme de roches. Les études expérimentales d'IPS réalisées sur des agrégats de quartz n'ont pas été couronnées de succès en raison d'un taux faible d'IPS, et les expériences IPS réalisées en utilisant une halite saturée comme analogue de roche (Spiers et Schutjens, 1990 ; Hickman et Evans, 1991 ont laissé des incertitudes quant au détail des mécanismes IPS et à la structure/saturation au contact du grain dans ce matériau. La présente étude fait état de quatre expériences de dissolution de contact réalisées sous microscope optique afin d'étudier le mécanisme et la cinétique de l'IPS pour des contacts simples halite/halite et halite/verre, chargés en eau salée (température ambiante. Des forces normales de contact dans la gamme de 1,0 à 2,6 N ont été appliquées en présence d'eau salée saturée en NaCl, induisant des pressions de 0,8 à 7,4 MPa. Des pertes de masse et des convergences - fonction du temps - ont été observées pour tous les contacts. Dans tous les cas, le fait de charger le contact (ou d'augmenter la charge sur le contact a conduit à la formation immédiate d'une morphologie de contact rugueuse, composée d'un motif d'îles et de canaux, contrôlé par des caractéristiques cristallographiques, à l'échelle de quelques microns. Cette microstructure non équilibrée a évolué dans le temps vers une face de contact optiquement plate. Le processus de convergence

  8. Dimensionnement des actionneurs électriques alimentés à fréquence variable sous faible tension

    Science.gov (United States)

    Biedinger, J.-M.; Vilain, J.-P.

    1999-09-01

    In Part I we present a multidisciplinary analysis model for the prediction of functional connections between the design variables and the electromagnetical, electrical and thermal performances of a brushless permanent magnet motor. In this paper we have elaborated a design methodology for electrical motors supplied from a variable-frequency low-voltage source. The objective is to take into account the influence of the inverter's dynamics from the beginning of the design, for the same reasons as we do for electromechanical and thermal constraints. The procedure is based on a Sequential Quadratic Programming optimization method. Two techniques are used to take into account the influence of the inverter: the first one develops the performance analysis with the multidisciplinary model; the second one considers the inverter's current reference as a supplementary optimization variable for the control of the design. Optimization difficulties linked to the chopping of the converter are discuted in connection with a sensitivity analysis of the torque, with respect to the inverter's current reference; a method is proposed to enhance the performances of the algorithm. The method has been applied to the design of a permanent magnet brushless DC motor used in the propulsion system of an electrical scooter; evolution of the design with the complexity level of analysis model is evidenced. Dans une première partie nous avons développé un modèle d'analyse pluridisciplinaire qui établissait les dépendances fonctionnelles entre les variables de conception et les performances magnéto-électro-thermiques d'un moteur brushless à aimants permanents. Dans cet article nous décrivons une procédure de dimensionnement adaptée à la conception de la machine alimentée à fréquence variable sous faible tension. L'objectif est d'intégrer la dynamique du convertisseur électronique dès la phase initiale du dimensionnement, au même titre que les spécifications

  9. L'intervention sous-marine : situation actuelle et perspectives d'avenir Underwater Operations and Techniques: Current Situation and Future Outlook

    Directory of Open Access Journals (Sweden)

    Bertrand A. R. V.

    2006-11-01

    Full Text Available A l'occasion de la Conférence Internationale de Paris sur la Pénétration sous-marine(6-8 décembre 1982, cet article fait le point sur les différents moyens d'intervention sous-marine disponibles à ce jour (plongeurs, engins télécommandés, sous-marins à pression atmosphérique et sur un certain nombre de problèmes technologiques communs (matériaux, télémanipulation, navigation, sources d'énergie. Ce domaine est encore en pleine évolution et fait appel aux récentes innovations technologiques. Bien que les engins télécommandés semblent avoir actuellement la faveur des industriels, les autres moyens restent d'avenir prometteur, la complémentarité devant remplacer dans le futur la concurrence La résurrection de l'Argyronète qui doit devenir en 1985 un banc d'essais des nouvelles techniques est le témoignage de l'activité de ce secteur industriel. This article is based on the International Symposium in Paris on Underwater Operations and Techniques 6-9 December 1982. It reviews the different methods now available for underwater operations (divers, remote-controlled vehicles, atmospheric-pressure submarines and various technological problems common to all of them (materials, remote manipulation, navigating, power sources. This field is evolving rapidly and makes use of the most recent technological innovations. Although remote-controlled vehicles now seem to be favored by industrialists, the other methods still have a promising future, and the complementariness of these methods can be expected to replace rivalry among them. The resurrection of the Argyronète project, which should become a test bench for new techniques in 1985, is a good illustration of the activity going on in this industrial sector.

  10. The natural seismic hazard and induced seismicity of the european HDR (hot dry rock) geothermal energy project at Soultz-sous-Forets (Bas-Rhin, France); Alea sismique naturel et sismicite induite du projet geothermique europeen RCS (roche chaude seche) de Soultz-sous-Forets (Bas-Rhin, France)

    Energy Technology Data Exchange (ETDEWEB)

    Helm, J A

    1996-06-07

    Development of the Soultz-sous-Forets HDR (Hot Dry Rock) geothermal energy project will involve important fluid injections which will induce micro-seismic events. This thesis discusses the natural seismicity of the region and induced seismicity associated with fluid injections. A catalogue of all historical and instrument seismicity of the Soultz-sous-Forets (SSF) region has been compiled. This seismicity does not correspond to movements along the major tectonic features of the region. The area around SSF has been identified as being one where high heat flow corresponds to low seismicity. The largest well documented seismic event in the region which took place in 1952 had an epicentral intensity of VI. All important data pertaining to the series of seismic events which took place in the region from August to October 1952 have been collected and are presented. This work details the installation and operation of a permanent 3 station network of accelerometers and seismometers around the HDR site. Also the installation and operation of a mobile network of vertical seismometers during fluid injections. 167 micro-seismic events were recorded on the surface network, with magnitudes from -0.5 to 1.9. The preferential alignment of the micro-seismic cloud is N160 deg. Individual focal mechanisms of the larger seismic events correspond to an extensional tectonic regime. Stress inversion of P wave polarities indicates that the maximum stress is vertical and the intermediate and minimum stress axes horizontal. The largest of the horizontal stresses is orientated N124 deg and the smallest N34 deg. Induced seismic movement is taking place on pre-existing fractures controlled by the in situ stress seismic movement is taking place on pre-existing tectonic fractures controlled by the in situ stress field, and the largest of the induced events had a magnitude 1.9. This level of seismicity does not pose any environmental hazard to the region around Soultz-sous-Forets. (author) 151

  11. Lutte contre le Bremia de la laitue en pépinière et sous abri froid : compte-rendu d'essai 2005

    OpenAIRE

    Lambion, Jérôme

    2006-01-01

    Le mildiou de la laitue (Bremia lactucae) est la maladie la plus redoutée sur cette espèce, notamment en culture biologique d’hiver sous abris. En Provence, les dégâts sont très importants, parfois dès la pépinière, et entraînent de fortes pertes financières. Cette situation est due à deux facteurs principaux : d’une part au contournement récurrent des résistances génétiques par de nouvelles souches de Bremia (25 races déterminées à ce jour), et d’autre part à la faiblesse des méthodes de lut...

  12. Stress corrosion cracking of Inconel in high temperature water; Corrosion fissurante sous contrainte de l'Inconel dans l'eau a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Coriou,; Grall,; Gall, Le; Vettier, [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Some Inconel samples were subjected to hot water corrosion testing (350 deg. C), under stress slightly above the elastic limit. It has been observed that different types of alloys - with or without titanium - could suffer serious intergranular damage, including a complete rupture, within a three months period. In one case, we observed an unusual intergranular phenomenon which appeared quite different from common intergranular corrosion. (author) [French] Des essais de corrosion d'Inconel sont realises dans l'eau a 350 deg. C, et sous contrainte legerement superieure a la limite elastique. On constate que differentes varietes d'alliage avec ou sans titane donnent lieu a des accidents intergranulaires graves allant jusqu'a rupture complete en 3 mois. Dans un cas, on observe un phenomene intergranulaire particulier tres different de la corrosion intergranulaire classique. (auteur)

  13. Le pardon ou l’oubli ? La réhabilitation judiciaire en France sous la IIIe République : le cas d’Angers

    OpenAIRE

    Coltel, Antony

    2011-01-01

    La réhabilitation judiciaire constitue une forme essentielle du « pardon officiel » que la société française, sous la IIIe République, pouvait accorder aux anciens condamnés. La réhabilitation judiciaire s’applique à des condamnés ayant subi leur peine en bonne et due forme et non à des innocents injustement punis ayant obtenu la révision de leur procès. Il s’agit donc d’une mesure de pardon spécifique inaugurée par les codes napoléoniens, rétablissant le condamné dans ses droits et effaçant ...

  14. Processus d'innovation et recomposition des territoires agricoles : le cas du semis sous couvert végétal au nord du Cameroun

    OpenAIRE

    Dugué, Patrick; Olina Bassala, Jean-Paul

    2015-01-01

    Au nord du Cameroun, l'adoption des systèmes de culture sous couvert végétal (SCV) butte sur le partage des résidus de culture fourragers en saison sèche entre le bétail et la couverture du sol. Elle nécessite donc d'accroître l'offre fourragère et de prendre en compte les différents types d'élevage (villageois, semi-sédentaire, transhumant, etc.). Dans les conditions actuelles de pratique des SCV par les producteurs (faible couverture du sol, peu d'années successives en SCV) les effets atten...

  15. Identité hors territoire. Les élites espagnoles exilées en France sous la dictature de Primo de Rivera (1923-1930

    Directory of Open Access Journals (Sweden)

    Elvire Diaz

    2006-09-01

    Full Text Available Le territoire étant un point d’ancrage de l’identité individuelle et nationale, nous verrons dans ce travail si hors territoire, il peut y avoir préservation de l’identité, individuelle, collective, nationale, débouchant sur une dé-territorialisation, au sens défini par Gilles Deleuze. Notre objet d’étude portera sur le cas d’une micro-société hors territoire, les élites intellectuelles espagnoles exilées en France sous la dictature du Général Miguel Primo de Rivera (1923-1930.Le général Mig...

  16. Écrire dans la variante de l’autre : le cas de Sous les vents de Neptune de Fred Vargas

    Directory of Open Access Journals (Sweden)

    Nadine Vincent

    2014-04-01

    Full Text Available Pour tout auteur, choisir d’écrire dans une langue ou dans la variante d’une langue qui n’est pas la sienne représente un défi de taille. Nous nous intéresserons au roman Sous les vents de Neptune, de l’écrivaine française Fred Vargas, qui a situé une partie de son intrigue au Québec, sans maîtriser la notion de variation linguistique. En analysant les réactions des lecteurs européens et québécois, de même que les caractéristiques de la langue québécoise de Vargas, nous aborderons la question de l’impérialisme linguistique et de son anachronisme au xxie siècle.

  17. "Velvet":Sous-titrage de l'épisode 1 de la série de R. Campos et G.R. Neira

    OpenAIRE

    De Corte, Inès

    2017-01-01

    Sous-titrage du premier épisode de la série "Velvet" réalisée par R. Campos et G.R. Neira et produite par Bambú Producciones. Contextualisation de la série dans l'histoire et dans les jeux d'influences de l'industrie de la mode afin d'évaluer l'adaptation de la série et sa crédibilité historique. Commentaires de traduction expliquant le processus de traduction, la réflexion et la méthodologie employées. Master [120] en traduction, Université catholique de Louvain, 2017

  18. Gazettes sous influence : le Courrier du Bas-Rhin, la Gazette des Deux-Ponts et les sujets touchant la Russie vers 1770

    Directory of Open Access Journals (Sweden)

    Georges Dulac

    2016-11-01

    Full Text Available Vers 1770, la campagne anti-russe du gouvernement français tend à dégrader l’image de la Russie, ce qui lèse gravement ses intérêts, notamment quand elle doit emprunter pour financer la guerre avec la Turquie. Aussi le prince Dmitri Alexeevitch Golitsyn, ministre plénipotentiaire à La Haye, se montre-t-il alors très actif sur ce terrain. Sa correspondance avec Pétersbourg témoigne de ses efforts, aux effets inégaux, pour influer sur les informations diffusées par quelques journaux : principalement le Courrier du Bas-Rhin, publié par Jean Manzon à Trèves, sous contrôle prussien, et dans une moindre mesure les deux Gazettes des Deux-Ponts, l’une politique, l’autre littéraire. Le journaliste de Trèves, qui trouve son intérêt à prendre le parti de la Russie, met en œuvre en sa faveur un discours journalistique abondant et parfois très élaboré. Cependant, la ligne du journal subit des fluctuations sensibles, selon l’évolution de la situation et à la suite de diverses interventions, dont celles du roi de Prusse et d’autre part de Stanislas-Auguste, qui pensionne un temps le journaliste. La Gazette des deux Ponts pratique l’information orientée avec plus de finesse, et, comme la gazette littéraire, accorde une large place à la matière russe : mais sur le plan politique, son traitement reste le plus souvent sous influence française et répond rarement aux vœux de D. A. Golitsyn.

  19. Production and study of mixed Al-Al{sub 2}O{sub 3} thin films for passive electronic circuits; Realisation et etude des couches minces mixtes Al-Al{sub 2}O{sub 3} pour circuits electroniques passifs

    Energy Technology Data Exchange (ETDEWEB)

    Pruniaux, B [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

    1967-07-01

    A new vacuum deposition process, named reactive evaporation, is used to realize passive thin film circuits. Using aluminium, oxidized at various steps in its vapor phase, we obtain: - Al-Al{sub 2}O{sub 3} cermet resistors (R{sub {open_square}} = 10000 {omega}{sub {open_square}}, CTR <{+-} 150 ppm/deg. C) which show oscillations of the resistivity versus the thickness of the layer, in distinction to classical theory. - Al{sub 2}O{sub 3} capacitors (C{sub {open_square}} = 60000 pf/cm{sup 2}, tg {delta} < 0.5 per cent). These thin film components present good electrical behaviour and should find interesting applications in integrated circuits. (author) [French] Une nouvelle technique de depot sous vide, l'evaporation reactive est utilisee pour realiser des circuits passifs en couches minces. En oxydant, en phase vapeur, de l'aluminium a differents degres, on obtient: - des resistances en cermet Al-Al{sub 2}O{sub 3} (R{sub {open_square}} = 10000 {omega}{sub {open_square}}, CTR <{+-} 150 ppm) dont Ia resistivite oscille en fonction de l'epaisseur, contrairement aux previsions de la theorie classique. - Des capacites en Al{sub 2}O{sub 3} (C{sub {open_square}} = 60000 pf/cm{sup 2}, tg {delta} < 0.5 pour cent). Ces elements presentent de bonnes caracteristiques electriques et seraient avantageusement utilises en circuits integres. (auteur)

  20. Rapid identification and classification of bacteria by 16S rDNA restriction fragment melting curve analyses (RFMCA).

    Science.gov (United States)

    Rudi, Knut; Kleiberg, Gro H; Heiberg, Ragnhild; Rosnes, Jan T

    2007-08-01

    The aim of this work was to evaluate restriction fragment melting curve analyses (RFMCA) as a novel approach for rapid classification of bacteria during food production. RFMCA was evaluated for bacteria isolated from sous vide food products, and raw materials used for sous vide production. We identified four major bacterial groups in the material analysed (cluster I-Streptococcus, cluster II-Carnobacterium/Bacillus, cluster III-Staphylococcus and cluster IV-Actinomycetales). The accuracy of RFMCA was evaluated by comparison with 16S rDNA sequencing. The strains satisfying the RFMCA quality filtering criteria (73%, n=57), with both 16S rDNA sequence information and RFMCA data (n=45) gave identical group assignments with the two methods. RFMCA enabled rapid and accurate classification of bacteria that is database compatible. Potential application of RFMCA in the food or pharmaceutical industry will include development of classification models for the bacteria expected in a given product, and then to build an RFMCA database as a part of the product quality control.

  1. Evolution de la perméabilité d'agrégats de sels sous contrainte liée à des circulations de fluides : dissolution, colmatage, déformation

    OpenAIRE

    Chen , Tao

    1994-01-01

    Le but de ce travail est d'étudier l'évolution de la perméabilité d'agrégats de sels sous contrainte lorsque les fluides circulant dans ces agrégats peuvent réagir avec le solide par des dissolutions et/ou des colmatages. Des essais de circulation de divers fluides à travers des échantillons de briques de sels sous contrainte ont permis de suivre l'évolution de la composition des fluides en cours d'essai. L'évolution des matériaux a été aussi caractérisée en cours d'essai (mesure de vitesse a...

  2. A continuous acceleration tube of ions under 200 KV; Un tube d'acceleration continue d'ions sous 200 KV

    Energy Technology Data Exchange (ETDEWEB)

    Mongodin, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1954-07-01

    The realization of an Van de Graaff accelerator required, for the preliminary studies, the construction of a small proton accelerator, functioning at 200 kV in order to resolve some parasitic effects inherent to the accelerators tubes. The aim of this report is to describe the different organs of the accelerator tube, to explain the operating system and to encode their characteristics. The report first presents the ion source and the beam buncher permitting to inject in the accelerator tube particles of about 9 kV and very batched in a thin beam of circular section. Then the study explain the tube characteristics considered like optic system. A method to obtain precise calculation of particle trajectories is exposed. Aberrations of the system were discussed and balance of the currents on all electrodes inside the tube for different regimes of working were provided. The influence of the residual pressure in the tube were explained. The report finally ends on a part of the fundamental problem of the straining occurring inside the tubes accelerators under high tension. (M.B.) [French] La realisation d n accelerateur du type Van de Graaff a necessite, entre autres etudes preliminaires, la construction d'un petit accelerateur de protons, fonctionnant sous 200 kV afin d'eclaircir certains effets parasites propres aux tubes accelerateurs. L'objet de ce rapport est de decrire les differents organes du tube accelerateur, d'en expliquer le fonctionnement et de chiffrer leurs caracteristiques. Le memoire presente d'abord la source d'ions et le canon permettant d'injecter dans le tube accelerateur des particules de 9 kV environ et bien groupees dans un faisceau fin de section circulaire. Puis il passe a l'etude du tube considere comme systeme optique. Une methode utilisee pour le calcul precis des trajectoires des particules y est exposee. Il aborde le probleme des aberrations de ce systeme et fournit par la suite le bilan des courants sur toutes les electrodes a l

  3. Production of Short-Lived Radionuclides at the Hahn-Meitner Institute in West Berlin; Production de Radionuclides a Courte Periode a l'Institut Hahn-Meitner de Berlin-Ouest; ПРОИЗВОДСТВО КОРОТКОЖИВУЩИХ РАДИОИЗОТОПОВ В ИНСТИТУТЕ ХАНА-МАЙТНЕРА В ЗАПАДНОМ БЕРЛИНЕ; Produccion de Radionuclidos de Periodo Corto en el Instituto Hahn-Meitner de Berlin Occidental

    Energy Technology Data Exchange (ETDEWEB)

    Felix, F. W.; Pirrwitz, D.; Szabo de Bucs, E. [Hahn - Meitner-Institut fuer Kern Forschung, Berlin, Federal Republic of Germany (Germany)

    1963-03-15

    The Hahn-Meitner Institute for Nuclear Research has produced short-lived radionuclides for medical and scientific purposes in the West Berlin area since 1960. Production now covers, the nuclides commonly used in medical applications, such as Na{sup 25}, K{sup 42} and Au{sup 198}, and other outstanding nuclides such as Cu{sup 64}, Zn{sup 69m} and F{sup 18}; Na{sup 24} and K{sup 42}are produced by neutron irradiation of the chlorides and, after calibration, distributed as solid material; Au{sup 198} is irradiated in metallic form, which is suitable for implantation in cancer therapy; F{sup 18} is produced by the reaction 0{sup 16} (t, n) and irradiation of LiNO{sub 3}. The separation of F{sup 18} by ion exchange showed better results than those usually given in the literature. For the production of Cu{sup 64} and Zn{sup 69m} special electrolytic methods have been developed to extract the radionuclides produced by a Szilard- Chalmers reaction on the phthalocyanines. Both nuclides have found application in medical diagnostics. In the paper details are given of irradiation facilities and techniques, production methods and apparatus, essay and calibration of the radionuclides produced and production capacity. (author) [French] Depuis 1960, l'Institut de recherches nucleaires Hahn-Meitner produit des radionucleides a courte periode a usage medical et scientifique pour la region de Berlin-Ouest. L'Institut prepare maintenant des nucleides utilises couramment en medecine tels que {sup 25}Na, {sup 42}K et {sup 198}Au, ainsi que quelques autres nucleides moins usuels comme {sup 64}Cu, {sup 69m}Zn et {sup 18}F. Le sodium-24 et le potassium-42 sont produits par irradiation neu- tronique des chlorures et distribues sous forme solide apres etalonnage. L'or-198 est irradie sous forme metallique, utilisable pour les implantations dans le traitement du cancer. Le fluor-18 est produit par la reaction {sup 16}0 (t, n) et par irradiation de LiNO{sub 3}. La separation de {sup 18}F par

  4. Potentiel de production de biogaz à partir de résidus agricoles ou de cultures dédiées en France

    Directory of Open Access Journals (Sweden)

    ALMANSOUR, Essam

    2011-02-01

    Full Text Available Et si on destinait une part importante des résidus agricoles à la production de biogaz ? Encore faut-il évaluer les ressources mobilisables, les taux de résidus disponibles, les moyens de collecte permettant la production ainsi que les rendements envisageables en fonction des cultures utilisées. L'étude présentée ici laisse entrevoir un potentiel important largement sous-estimé.

  5. L'interdépendance entre les sous-systèmes conjugal et parental: une analyse personne-processus-contexte

    Directory of Open Access Journals (Sweden)

    Bigras Marc

    2000-01-01

    Full Text Available Dans le présent article nous étudions les mécanismes de transmission des difficultés socioaffectives entre les systèmes conjugal et parental sous l'effet d'une part de stress contextuels comme la pauvreté des familles et, d'autre part, des caractéristiques personnelles des membres de ces familles comme le sexe et l'âge de l'enfant. Un échantillon de couples avec ou sans enfant permet dans une première étude d'estimer l'impact de la présence de l'enfant sur le couple alors que deux autres études posent la question complémentaire de l'impact du couple sur l'enfant. Les résultats de ces études contribuent à démontrer l'interdépendance entre le couple et l'enfant alors que chaque membre de la famille peut-être une source d'influence sur les autres. Nous argumentons qu'une réponse aversive à des problèmes extrafamiliaux favorise des stress intrafamiliaux mais que cela se révèle surtout selon les caractéristiques des membres de la famille.

  6. Critical and sub-critical experiments on U-BeO lattices; Experiences critiques et sous-critiques sur reseaux U-BeO

    Energy Technology Data Exchange (ETDEWEB)

    Benoist, P.; Gourdon, Ch.; Martelly, J.; Sagot, M.; Wanner, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Deniz, V.; Joshi, B.V.; Sahai, K. [Atomic Energy Establishment Trombay (India)

    1958-07-01

    Sub-critical experiments have allowed us to measure the material buckling of uranium natural oxide of beryllium lattices with a grid of 15 cm, and made up of uranium bars measuring 2.60 - 2.92 - 3.56 and 4.40 cm of diameter. A critical experiment has then been conducted with hollow 1.35 per cent enriched uranium bars. A study of U-BeO 18.03 cm grid lattices is at present being conducted. (author)Fren. [French] Nous avons mesure par des experiences sous-critiques le laplacien matiere de reseaux uranium naturel-oxyde de beryllium, dont la maille carree a un pas de 15 cm, realises avec des barreaux d'uranium de diametres 2,60 - 2,92 - 3,56 - 4,40 cm. Une experience critique a ete faite ensuite avec des barres creuses d'uranium enrichi a 1,35 pour cent; l'etude des reseaux U-BeO de pas 18,03 cm est actuellement en cours. (auteur)

  7. Proceedings of the European Symposium on Pressure Equipment - ESOPE 2007; Actes des Journees d'Etudes Europeennes Equipements sous Pression - ESOPE 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    orientations retained for pressure equipments used in the nuclear industry, the European standards and the international collaboration, the Chinese standards and finally the recent developments of the codes and standards of the ASME in the USA. ESOPE 2007 also includes a Poster Session organized in the context of the international exhibition, which allows the companies to present their industrial realizations in parallel to the Symposium. (author) [French] Tous les trois ans, et depuis maintenant trente ans, l AFIAP organise un symposium ou les experts et acteurs oeuvrant dans le domaine des equipements sous pression, qu'ils soient fixes ou transportables, peuvent se rencontrer et echanger sur tous les developpements touchant a leur activite. Ce qui etait dans un premier temps denomme 'Congres national sur la technologie des appareils a pression', puis 'Journees d'etude sur les appareils a pression', est devenu depuis 2001 les 'Journees d'etude Europeennes sur les equipements sous pression' ou encore 'European Symposium on Pressure Equipment' (ESOPE), marquant ainsi une volonte d'ouverture a l'Europe et a l'international dans un contexte marque par la mise en oeuvre des directives europeennes applicables a ces equipements. Les journees 2001 furent plus particulierement consacrees a la mise en oeuvre des directives harmonisant la construction des equipements, et les journees 2004 ont ete plus particulierement axees sur la gestion des equipements en service. Pour le symposium ESOPE 2007, le comite d organisation a souhaite reprendre ces deux themes sous les aspects de la securite et de la competitivite, ainsi que de l'innovation. La seance pleniere du dernier jour sera entierement consacree a ces themes et comportera une Table Ronde ou s'exprimeront des representants nationaux et europeens des pouvoirs publics, des representants des fabricants et utilisateurs, ainsi que des experts engages dans la

  8. Critical and sub-critical experiments on U-BeO lattices; Experiences critiques et sous-critiques sur reseaux U-BeO

    Energy Technology Data Exchange (ETDEWEB)

    Benoist, P; Gourdon, Ch; Martelly, J; Sagot, M; Wanner, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Deniz, V; Joshi, B V; Sahai, K [Atomic Energy Establishment Trombay (India)

    1958-07-01

    Sub-critical experiments have allowed us to measure the material buckling of uranium natural oxide of beryllium lattices with a grid of 15 cm, and made up of uranium bars measuring 2.60 - 2.92 - 3.56 and 4.40 cm of diameter. A critical experiment has then been conducted with hollow 1.35 per cent enriched uranium bars. A study of U-BeO 18.03 cm grid lattices is at present being conducted. (author)Fren. [French] Nous avons mesure par des experiences sous-critiques le laplacien matiere de reseaux uranium naturel-oxyde de beryllium, dont la maille carree a un pas de 15 cm, realises avec des barreaux d'uranium de diametres 2,60 - 2,92 - 3,56 - 4,40 cm. Une experience critique a ete faite ensuite avec des barres creuses d'uranium enrichi a 1,35 pour cent; l'etude des reseaux U-BeO de pas 18,03 cm est actuellement en cours. (auteur)

  9. La transestérification hétérogène de l’huile de tournesol sous alumine : Production du biodiesel EEHV

    OpenAIRE

    MESBAHI, Dalila

    2012-01-01

    La transestérification d’huiles végétales est une réaction catalytique homogène et hétérogène, elle est constituée par trois étapes consécutives et réversibles .Après la dernière étape on obtient un mélange d’esters : le biodiesel. L’huile de tournesol, de commerce, utilisée a été distillée. Celle –ci présente une masse volumique de 0,92 g.cm-3 et une viscosité de 54,6 mm2.s-1 à 20°C. Les analyses par UV-VIS, FTIR, CPG et HPLC ont montré que cette huile de tournesol est classique c'est-à-dire...

  10. Migration under irradiation of the I, Cs fission products in SiC; Migration sous irradiation des produits de fission I, Cs dans SiC

    Energy Technology Data Exchange (ETDEWEB)

    Benyagoub, A. [Paris-11 Univ., 91 - Orsay (France). Centre de Spectrometrie Nucleaire et de Spectrometrie de Masse; Centre Interdisciplinaire de Recherche Ions Lasers (CIRIL), 14 - Caen (France)

    2007-07-01

    This work is a part of the CEA-CNRS program on the behaviour of materials under irradiation. Its aim is to contribute to scientifically base the predicting methods of the behaviour of ceramic materials under irradiation in using the important development of calculation means. In particular, its role has been 1)to develop the basic knowledge and the interactions physics and 2)to elaborate calculation models at relevant scales. The studied topics are until now, the damage mechanisms, the diffusion under irradiation, the micro-structural evolutions and the incidences on the mechanical properties. (O.M.)

  11. The Main Technological Characteristics of Apparatus for Industrial Radiochemical Processes, in Particular Ethylene Polymerization; Caracteristique techniques fondamentals des appareils pour l'application industrielle de reactions chimiques sous rayonnement (notamment la polymerisation de l'ethylene ); Osnovnye tekhnologicheskie kharakteristiki apparatov dlya provedeniya radiatsionno-khimi-cheskikh protsessov (v chastnosti, dlya polimerizatsii ehtilena) v promyshlennom masshtabe; Principales caracteristicas tecnologicas de los aparatos para la aplicacion industrial de reacciones radioquimicas

    Energy Technology Data Exchange (ETDEWEB)

    Syrkus, N P; Breger, A K; Weinstein, B I [Karpov Physicochemical Institute, Moscow, USSR (Russian Federation)

    1960-07-15

    The paper gives a general review of some of the main technological features of apparatus, for instance spherical apparatus, for industrial radiochemical processes. A method is proposed for estimating the effectiveness of apparatus of any given construction by comparing it with the output of an infinitely large apparatus having the same radiation source. An account is given of the technological features of an apparatus for radio-polymerizing ethylene at 200 atmospheres and 25{sup o}C{sup 1} with a rodshaped gamma-radiation source (Co{sup 60}) of variable activity. This apparatus can be designed to suit the mean dose rate which the power efficiency of the apparatus allows. It is shown that the yield, Q, of the apparatus is, other things being equal, a constant ration of the power, W{sub 0}, of the gamma-radiation of the apparatus. In the apparatus reviewed, Q {approx} W{sub 0}{sup 0,5}. (author) [French] Le memoire contient un expose general des caracteristiques techniques essentielles des appareils, par exemple d'un appareil du type spherique, pour l'application industrielle de reactions chimiques sous rayonnement. Le memoire propose une methode pour evaluer l'efficacite d'appareils de tous types en comparant la productivite de chaque modele avec celle d'un appareil infiniment grand, alimente par une source de rayonnement identique. Le memoire indique le calcul des caracteristiques techniques de l'appareil destine a la polymerisation sous rayonnement de l'ethylene (pression : 200 atmospheres, temperature: 25{sup o}C{sup 2} avec une source allongee de rayonnement gamma Co{sup 60} pour diverses activites. Un appareil de ce type peut etre calcule selon les valeurs moyennes de l'intensite des doses, determinees selon la valeur du coefficient d'efficacite totale energetique de l'appareil. On constate que la productivite (Q) de l'appareil, toutes choses egales d'ailleurs, est puissance de l'intensite (W{sub 0}) du rayonnement gamma de l'appareil. Pour l'appareil considere

  12. Soudage par explosion thermique sous charge de cermets poreux à base de TiC-Ni sur substrat en acier-comportement tribologique Welding of porous TiC–Ni based cermets on substrate steel by thermal explosion under load-tribological behaviour

    Directory of Open Access Journals (Sweden)

    Lemboub Samia

    2013-11-01

    Full Text Available Dans ce travail, nous nous intéressons à l'élaboration de cermets à base de TiC-Ni par dispersion de particules de carbures, oxydes ou borures dans une matrice de nickel, grâce à la technique de l'explosion thermique sous une charge de 20 MPa. La combustion de mélanges actifs (Ti-C-Ni-An où An = Al2O3, MgO, SiC, TiB2, WC, basée sur la réaction de synthèse de TiC (ΔHf298K = −184 kJ/mole, génère des cermets complexes. Un court maintien sous charge du cermet à 1373 K, après l'explosion thermique, permet son soudage sur un substrat en acier XC55. Les cermets obtenus dans ces conditions demeurent poreux et conservent une porosité de l'ordre de 25–35 %. La densité relative du cermet, sa dureté et son comportement tribologique, dépendront de la nature de l'addition dans les mélanges de départ. Porous TiC-Ni based cermets were obtained by dispersion of carbides, oxides or borides particles in a nickel matrix thanks to the thermal explosion technique realized under a load of 20 MPa. The combustion of active mixtures (Ti-C-Ni-An where An = Al2O3, MgO, SiC, TiB2 or WC based on the titanium carbide reaction synthesis (ΔHf = −184 kJ/mol, generates porous complex cermets. After the thermal explosion, a short maintenance under load at 1373 K of the combustion product, allows at the same time the cermets welding on a carbon steel substrate. The obtained cermets under these conditions preserve a porosity of about 25–35%. The relative density, hardness and tribological behaviour of the complex cermets depend on the additions nature (An in the starting mixtures.

  13. Hot pressing of U-UC cermets and stoichiometric uranium monocarbide; Preparation par frittage sous charge de cermets U-UC et de monocarbure stoechiometrique

    Energy Technology Data Exchange (ETDEWEB)

    Dubuisson, J; Houyvet, A; Le Boulbin, E; Lucas, R; Moranville, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    High density fuels, either in uranium monocarbide or in U-UC cermets have been prepared on laboratory-scale, by hot pressing of mixtures of uranium powder and graphite in suitable proportions. Uranium powder is prepared by calcium reduction of UO{sub 2} followed by an acetic leaching at low temperature. An adequate protection-treatment permits the manipulation of the powder in the open air. Uranium and Graphite powders are intimately mixed and then hot pressed in a double effect graphite die at a temperature of 900-1000 deg. C under a charge of 200 kg/cm{sup 2} during 3 hours. A special design of the die avoids the breaking of the graphite during the sintering. In this way, samples are prepared, the characteristics of which are: 1) {+-} 5 pour cent of homogeneity for a ratio height/diameter = 2. 2) almost theoretical density (98 pour cent) 3) low concentration of unreacted carbon (heat treatment of stoichiometric monocarbide can be useful for completion of reaction) 4) the micrographic examination shows: - a network of monocarbide surrounding uranium in the case of low concentration cermets (<2,5 per cent C) - two networks intimately mixed for high concentration cermets (<2,5 per cent C) - a fine grain structure for the monocarbide (10 u). 5) In every case, the X rays examinations show a fine grain structure without any orientation, and no UC{sub 2}. Some indications are given on the physical (thermal cycling, conductibility) and chemical properties (corrosion, reaction with cladding materials). (author)Fren. [French] Une methode de preparation de combustibles de haute densite, soit en monocarbure d'uranium, soit en cermets U-UC, a ete mise au point au laboratoire. Il s'agit du frittage sous charge de melanges de poudres d'uranium et de graphite en proportion convenable. La poudre d'uranium est elaboree par calciothermie de l'oxyde UO{sub 2} suivie d'un lavage acetique a basse temperature. Un traitement de protection adequat pe sa manipulation a l'air. Les poudres

  14. Hortisol - Including energetic considerations into greenhouse cultivation; Hortisol - Integration des processus energetiques dans les cultures sous abris

    Energy Technology Data Exchange (ETDEWEB)

    Bonvin, M.; Morand, G.; Reist, A.

    2005-07-01

    The goal of the project is to optimize the utilization of the energetic and financial resources required for the commercial production of biomass in greenhouses though the development of a suitable computer simulation program. In a first step, the existing literature on the subject has been collected and reviewed with special emphasis on the culture of tomatoes. The main influencing parameters are: the temperature within the greenhouse and its time variations, the magnitude and the dynamics of thermal energy flows, the concentration of carbon dioxide, the lighting (natural and artificial), and the relative humidity. Considering all factors, a mathematical model has been worked out that quantifies all energy transfers through the outer surface of the greenhouse. A first version of a computer simulation program for the planning and operation of a greenhouse cultivating tomatoes has been developed. It shall be validated and refined in the forthcoming year (2006)

  15. The Influence Of Hydrothermal Alteration And Weathering On Rock Magnetic Properties Of Granites From The Eps-1 Drilling (soultz-sous-forÊts / France)

    Science.gov (United States)

    Just, J.; Schleicher, A.; Kontny, A.; de Wall, H.

    The EPS-1 drilling in Soultz-sous-Forêts (Rhinegraben, France) recovered a core pro- file of Tertiary to Permo-Mesozoic sediments deposited on a Variscan granitic base- ment. Magnetic susceptibility (k) measurements on the core material revealed a con- tinous increase from the basement/cover boundary (kmean 0.4 x 10-3 SI) into the magnetite-bearing granite (kmean 13 x 10-3 SI) over a depth range of 1417 U 1555 m. Rock magnetic and mineralogic studies were performed for the fresh granite, the hydrothermally altered granite near a fault zone and the altered granite from the fossil land surface near the basement/cover boundary. The decrease in susceptibility can be correlated with a gradual decomposition of magnetite to hematite and an alteration of the matrix minerals feldspars, biotite and hornblende to clay minerals and carbon- ates. Along with this transition, characteristic rock magnetic signatures can be dis- criminated for different degrees of alteration. While temperature-dependent magnetic susceptibility k(T)-curves in fresh granites indicate a typical multidomain magnetite course with good reversibility, different types of irreversible courses are observed for the altered granite. However, hematite could not be identified in the k(T)-curves. Al- tered granite shows relatively weak magnetic behaviour in AF-demagnetisation exper- iments, untypical for hematite. The alteration of the fresh granite also causes a change in magnetic fabric parameter, especially of the anisotropy factor. The magnetic min- eralogy from the altered granite in respect to the changes in rock magnetic properties will be discussed.

  16. Influences de la symphonie concertante sur la musique de la Cour parisienne sous l'Empire et la Restauration (1800-1830

    Directory of Open Access Journals (Sweden)

    Dratwicki, Alexandre

    2003-12-01

    Full Text Available The origins of the very much appreciated "symphonie concertante" can be found in the importance of public concerts given in Paris at the end of the 18th century. The specific repertoire played at the French Court during the years 1800-1830 distinctly shows this vogue for the "symphonie concertante", for it reveals the still unknown importance of virtuosity. Considered as an musical entertainment for the pompous parties at the French Court or as an musical accompaniment for the masses given at the Imperial and Royal Chapel, this "decorative concertant syle" became an essential part of the Regime etiquette during the Napoleonic empire as well as the Restoration period. This music, perfectly incorporated into the official guidelines, will disappear as a consequence of the political events of 1830 and the arrival of a new aesthetic movement, the Romanticism.

    [fr] La vogue du concert public à Paris, à la fin du XVIIIe siècle, fut à l'origine de l'essor phénoménal que connut la symphonie concertante. Le répertoire de la musique de la Cour - entre 1800 et 1830 - est particulièrement représentatif de cette mode : il révèle une place encore insoupçonnée laissée à la virtuosité. Agrémentant les messes de la Chapelle ou les bals donnés lors de fastueuses soirées, ce « style concertant décoratif » devint un élément constitutif de l'apparat gouvernemental sous l'Empire et la Restauration. Une sorte d'académisme officiel que les événements politiques de 1830 et l'essor du romantisme musical feront définitivement disparaître.

  17. Experimental and numerical study of the stability of phyllosilicates in a strong thermal gradient. Test in the geothermal site of Soultz-sous-Forets

    International Nuclear Information System (INIS)

    Baldeyrou-Bailly, A.

    2003-01-01

    Thermodynamic data of hydrated phyllosilicates, in particular clay minerals are not well known. The stability fields of these minerals are not well determined; following some authors they even do not exist. We have developed an experimental approach, in which a sequence of local equilibrium states between a fluid and minerals take place in a closed gold cell along a strong thermal gradient. The experiments were conducted in the chemical systems: Mg-Al-Si-H 2 O (MASH), K-Al-Si-H 2 O (KASH), and K-Mg-Al-Si-H 2 O (KMASH). The sequences of crystallization observed along the thermal gradient are the same if one exchanges the position of the cells containing the initial reacting materials with respect to the thermal gradient end-members. The crystallization sequences correspond to local equilibrium states. Following the temperature increase (from 200 to 350 C) one observes the following sequences: di-octahedral smectite? tri-octahedral smectite; kaolinite? donbassite? tri-octahedral chlorite; smectite? illite? muscovite; or even kaolinite? illite + smectite? donbassite; commonly observed in hydrothermal systems. They allow to develop a thermodynamic model for hydrated phyllosilicates, taking into account their hydration state as a function of temperature. This model shows the stability fields of clay minerals between 200 and 350 C.The chemical and mineralogical dynamics showed in these experimental systems has been applied to predict the possible dissolutions and/or precipitations which may take place between the circulated hot fluid and the geothermal granitic reservoir in the geothermal system at Soultz-sous-Forets. These processes may affect the duration of the geothermal reservoir, as a function of evolution in the morphology of the porosity. Our experimental approach shows that feldspars and smectites are forming the major part of the total volume of silicates which may precipitate in addition to carbonates already described in previous studies. (author)

  18. Radioinitiation of Chain Branched Reactions and its Sensitization; Amorcage sous rayonnement des reactions par ramification en chaine; sensibilisation du processus; Radiatsionnoe initsiirovanie tsennykh razvetvlennykh reaktsij i ego sensibilizatsiya; Radioiniciacion de reacciones en cadena ramificadas y medios para aumentar su sensibilidad

    Energy Technology Data Exchange (ETDEWEB)

    Barelko, E V; Kartashova, L I; Komarov, P N; Proskurnin, M A [Karpov Physico-Chemical Institute, Moscow, Union of Soviet Socialist Republics (Russian Federation)

    1960-07-15

    This paper describes the results of experiments by the writers with radioinitiation of chain branched reactions of the oxidation of organic compounds. The function of radiation as an initiating agent is described with reference to the oxidation of several unsaturated hydrocarbons and butanol. The reaction is self-accelerating and proceeds spontaneously after radiation has ceased. A detailed investigation was made of a process from oxidizing benzene, which has a high radiation resistance. The writers devised a method of sensitizing the radioinitiation of the oxidation of radiation-resistant substances by chemically inert but non-radiation-resistant substances. The main quantitative features of the process for the radiooxidation of benzene are stated to be the accumulation of various reaction products, and the effect of temperature, pressure, power and radiation dosage on the process of such accumulation. Information was obtained about the mechanism of the process. The design of circulating equipment is described. (author) [French] Dans ce memoire, les auteurs presentent les resultats d'une etude consacree a l'amorcage sous rayonnement de reactions, d'oxydation des composes organiques, par ramification en chaine. Ils montrent le role des rayonnements en tant qu'agents d'amorcage de la reaction, en citant comme exemples l'oxydation de certains hydrocarbures non satures et du butanol. La reaction possede un caractere d'auto-acceleration et continue spontanement lorsque l'action des rayonnements a cesse. La reaction d'oxydation du benzene a ete etudiee en detail; elle est caracterisee par la haute stabilite de la substance vis-a-vis de l'action des rayonnements. Les auteurs formulent les principes de la sensibilisation, par l'action de substances instables vis-a-vis des rayonnements de l'amorcage sous rayonnement de la reaction d'oxydation de substances stables vis-a-vis des rayonnements et chimiquement inertes. Le memoire fournit les caracteristiques quantitatives

  19. Diversité floristique sous canopée en plantation forestière de Mangombe-Edea (Cameroun

    Directory of Open Access Journals (Sweden)

    Makombu, G.

    2010-01-01

    Full Text Available Floristic diversity under canopy in forest plantation of Mangombe-Edea (Cameroon. Trees plantation of Mangombe is situated in rain forest of low altitude. Six plots among which one of Mansonia altissima (A.Chev. A.Chev., 2 of Lovoa trichilioides Harms, 3 of Terminalia ivorensis A.Chev. and one perturbed natural forest are concerned by this study. The work consisted to the evaluation of the floristic diversity under canopy in order to appreciate the influence of forest plantation on natural regeneration. A total of 26 families, 42 genders and 46 species were censured. Meliaceae and Apocynaceae are present in all the plots. In plot one of T. ivorensis, M. altissima and natural forest, the low value of equitability of Pielou traduces the dominance of flora by few species and the transitory situation of the ecosystem. On contrary the rest of plots present a good repartition of individuals among the species. One can notice a weak organization of the ecologic system in M. altissima plot, this corresponds to favourable conditions of environment for installation of many species represented by a few number of individuals. Shannon indices, relatively low in plot one of T. ivorensis characterize an ecosystem where one species is dominant. Globally, the regeneration under canopy is reconstituted progressively and remains less diversified than the nearest natural forest. Creation of genetic pool through selective entertainment under canopy will permit polycyclic management of plots for sustainable production of wood.

  20. Characterization and interpretation of a fractured rocky massif from borehole data. Boreholes of geothermal project at Soultz-sous-Forets and other examples of unidirectional sampling; Caracterisation et interpretation d`un volume rocheux fracture a partir de donnees de forages. Les forages geothermiques de Soultz-sous-Forets et autres exemples d`echantillonnages unidirectionnels

    Energy Technology Data Exchange (ETDEWEB)

    Dezayes, CH

    1995-12-18

    In this thesis, we study fractures from borehole data on two sites: in one, located at Soultz-sous-Forets (Alsace) in the Rhine graben, boreholes reach a delta Jurassic series forming a petroleum reservoir. At Soultz, fractures have been studied on cores and borehole images. Striated faults present on cores permit to determine the tectonic history of the granite, completed by field study in Vosges Massif. This history corresponds to the Rhine graben history knowing by different authors. The analysis of vertical induced fractures observed on borehole images indicates a present-day NW-SE to NNW-SSE compression. These variations of stress direction are confirmed by others in situ measurements, as hydraulic injection, micro-seismicity, etc... On cores and borehole images, numerous fractures have been observed. Most of them are linked to the E-W distension, which permits the Rhine graben opening at Oligocene. At greatest scale, in quartz minerals, the micro-fractures are constitute by fluid inclusion trails. Several sets are related to the E-W distension, but others sets are linked to compressive stages. These sets are not observed on cores. This is a under-sampling of some fractures by the boreholes, but theses fractures exit into to rock massif. On borehole images, fracture density is weakest than the cores, however the set organisation is the same. At Ravenscar, the distribution of fracture spacing along different unidirectional sampling shows a exponential negative law. However, the fracture density varies with sampling. (author) 199 refs.

  1. Space-time dependent impulse response of a subcritical cylindrical reactor; Reponse impulsionnelle spatio-temporelle d'un reacteur cylindrique en regime sous-critique

    Energy Technology Data Exchange (ETDEWEB)

    Cazemajou, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    In this paper, a new formulation of the spatial dependent impulse response of a subcritical reactor in a cylindrical geometry is proposed. An expression of the transfer function between a point source at the center of coordinates and the flux at a given point (r,z) is obtained by solving: by means of Laplace transform, the one group diffusion equation. In this transfer function, variables r and p (p being the Laplace variable) remain linked within a modified Bessel function. Taking the inverse Laplace transform is done by two different ways: - using the Mellin-Fourier method which separates variables r and t. This method makes it possible to establish that there is identity between the classical formulation and the new one. - using an inverse Laplace transform which keeps variables r and t linked. This method requires to approximate the inverse Laplace transform of the end factor. It is then possible to replace the radial harmonics modes series of the classical expression by a single function. This new formulation seems to be of particular interest when dealing with reactors of large size and lifetime. It is also interesting each time the harmonics play an important role. (author) [French] Dans le present rapport, on propose une nouvelle formulation de la reponse impulsionnelle spatio-temporelle d'un reacteur sous-critique, en geometrie cylindrique. Une expression de la fonction de transfert entre une source ponctuelle placee au centre des coordonnees et le flux au point courant (r,z) est obtenue en resolvant, par transformation de Laplace, l'equation de la diffusion a un seul groupe d'energie. Dans cette fonction de transfert, les variables r et p (variable de Laplace) demeurent groupees dans une fonction de Bessel modifiee. Le retour a l'original est effectue de deux manieres: - la methode de Mellin-Fourier qui separe les variables r et t, permet d'etablir l'identite entre la nouvelle formulation et la formulation classique. - un original conservant les variables

  2. Oxidation of iron and steels by carbon dioxide under pressure (1962); Oxydation du fer et des aciers par l'anhydride carbonique sous pression (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Colombie, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    After having developed one of the first thermo-balances to operate under pressure, we have studied the influence of the pressure on the corrosion of iron and steels by carbon dioxide. The corrosion was followed by three different methods simultaneously: by the oxidation kinetics, by micrographs, and by radiocrystallography. We have been able to show that the influence of the pressure is not negligible and we have provided much experimental evidence: oxidation kinetics, micrographic aspects, surface precipitation of carbon, metal carburization, the texture of the magnetite layer. All these phenomena are certainly modified by changes in the carbon dioxide pressure. In order to interpret most of our results we have been led to believe that the phenomenon of corrosion by CO{sub 2} depends on secondary reactions localised at the oxide-gas interface. This would constitute a major difference between the oxidation by CO{sub 2} and that by oxygen. (author) [French] Apres avoir etudie et mis au point une des premieres thermobalances fonctionnant sous pression, nous avons etudie l'influence de la pression sur la corrosion du fer et des aciers par l'anhydride carbonique. Notre etude a ete conduite simultanement sur trois plans differents: etude des cinetiques d'oxydation, etude micrographique et etude radiocristallographique. Nous avons pu montrer que l'influence de la pression n'etait pas negligeable et nous en avons fourni un faisceau de preuves experimentales important: cinetiques d'oxydation, aspect micrographique, precipitation superficielle de carbone, carburation du metal, texture de la couche de magnetite. Tous ces phenomenes sont sans aucun doute modifies par une variation de pression du gaz carbonique. Pour interpreter la plupart de nos resultats, nous avons ete conduits a penser que le phenomene de corrosion par CO{sub 2} etait tributaire de reactions secondaires localisees a l'interface oxyde-gaz. Ce serait la une des differences fondamentales entre l'oxydation par

  3. Compatibility of various magnesium alloys with pressurized carbon dioxide at high temperatures; Compatibilite de divers alliages de magnesium avec le gaz carbonique sous pression aux temperatures elevees

    Energy Technology Data Exchange (ETDEWEB)

    Dewanckel, B; David, R; Hulin, C; Leclercq, D [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

    1968-07-01

    This work on the compatibility of magnesium alloys with pressurized carbon dioxide has been carried out along three lines: - testing of special alloys containing additions of zirconium, manganese, cerium, zinc, beryllium and yttrium. The results are satisfactory, generally speaking, and the corrosion kinetics are often comparable to those of conventional magnesium-zirconium alloy; - influence of the quality of the carbon dioxide, in particular the presence of water vapour or of carbon monoxide in this gas. It appears that oxidation is reduced if the carbon dioxide contains traces of water vapour, but is more pronounced if carbon monoxide is also present; - study of certain phenomena related to corrosion: size changes in the samples during tests, structural modifications in the alloys (grain-size changes, formation of a cortical zone in the case of alloys containing zirconium). The influence of thermal cycling has also been studied in a few specific tests. The results obtained make it possible to compare the behaviour of various alloys under varying conditions of long-term use, and to choose, if required, the best composition for a given application. (authors) [French] Ce travail sur la compatibilite des alliages de magnesium avec le gaz carbonique sous pression a ete particulierement oriente dans trois directions: - epreuve, d'alliages speciaux comportant des additions de zirconium, manganese, cerium, zinc, beryllium et yttrium. Les resultats sont generalement satisfaisants et les cinetiques de corrosion souvent comparables a celles de l'alliage magnesium-zirconium classique; - influence de la qualite du gaz carbonique, et notamment de la presence de vapeur d'eau ou d'oxyde de carbone dans ce gaz. Il est apparu que l'oxydation est reduite si le gaz carbonique contient des traces d'eau, mais accrue si l'oxyde de carbone est egalement present; - etude de certains phenomenes lies a la corrosion: variations dimensionnelles des echantillons au cours des essais

  4. Texturation à froid sous contraintes triaxiales de phase à haute T_c de Bi(Pb)SrCaCuO préréagie

    Science.gov (United States)

    Langlois, P.; Massat, H.; Suryanarayanan, R.

    1994-11-01

    The alignment of grains in isostatically precompacted samples of prereacted Bi{1,8}Pb{0,4}Sr{2,0}Ca{2,2}Cu{3,0}O{10,3 + x} powder has been achieved by compressive plastic deformation under isostatic pressure at room temperature. Isostatic pressures were in the range 0.1 to 1 GPa and deformation rates were led up to 57 %. Prior to sintering, X-ray diffraction measurements corroborate an expected high- T_c phase purity of nearly 85 % and indicate that the as-deformed samples have been textured with the (c-axes parallel to the pressing direction whilst a.c. susceptibility measurements ascertain a high transition temperature around 107 K. Intergranular connection does not occur until sintering at 850 ^{circ}C for 80 h and measurements indicate then that the texture has been retained. Superconducting properties themselves show sensitivity to texture through anisotropy-related distinctive irreversibility lines. L'alignement de grains de poudre Bi{1,8}Pb{0,4}Sr{2,0}Ca{2,2}Cu{3,0}O{10,3 + x} préréagie a été réalisé par déformation plastique à température ambiante d'échantillons précompactés isostatiquement et comprimés sous pression isostatique, la gamme des pressions isostatiques allant de 0,1 à 1 GPa et les taux de déformation atteignant 57 %. Les mesures de diffraction de rayons X corroborent la pureté de phase à haute T_c proche de 85 % attendue et indiquent que les échantillons ainsi déformés ont été texturés avec les plans ab perpendiculaires à la direction de compression. Les mesures de susceptibilité alternative avèrent une température élevée de transition à environ 107 K mais la connexion intergranulaire n'est assurée qu'après un frittage à 850 ^{circ}C pendant 80 h dont on vérifie qu'il conserve la texture. Enfin, la sensibilité des propriétés supraconductrices à la texturation est évaluée par le biais de lignes d'irréversibilité distinctes en fonction de l'anisotropie.

  5. Applications of sub-optimality in dynamic programming to location and construction of nuclear fuel processing plant; Application de la sous-optimalite en programmation dynamique a la localisation et la cadence optimales de construction des equipements

    Energy Technology Data Exchange (ETDEWEB)

    Thiriet, L; Deledicq, A [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires, section des etudes economiques generales

    1968-09-01

    First, the point of applying Dynamic Programming to optimization and Operational Research problems in chemical industries are recalled, as well as the conditions in which a dynamic program is illustrated by a sequential graph. A new algorithm for the determination of sub-optimal politics in a sequential graph is then developed. Finally, the applications of sub-optimality concept is shown when taking into account the indirect effects related to possible strategies, or in the case of stochastic choices and of problems of the siting of plants... application examples are given. (authors) [French] On rappelle d'abord l'interet de la Programmation Dynamique dans les problemes d'optimisation et de Recherche Operationnelle dans les industries chimiques, et les conditions de representation d'un programme dynamique par un graphe sequentiel. On expose ensuite un nouvel algorithme de determination de politiques sous-optimales dans un graphe sequentiel. On montre enfin les applications du concept de sous-optimalite a la prise en compte d'effets indirects lies aux politiques possibles, aux choix dans l'aleatoire, a des problemes de localisation optimale d'usines... et on donne des exemples d'utilisation. (auteurs)

  6. Inhibiton of Yellow Nutsedge (Cyperus esculentus L. and Bermudagrass (Cynodon dactylon (L. Pers by a Mulch Derived from Rye (Secale cereale L. in grapevines Inhibición del Crecimiento de Chufa (Cyperus esculentus L. y Pasto Bermuda (Cynodon dactylon (L. Pers. con mulch Vegetal Proveniente de Centeno (Secale cereale L. en Vides

    Directory of Open Access Journals (Sweden)

    Juan Ormeño-Núñez

    2008-09-01

    Full Text Available Two field trials (Los Andes 1998-1999 and Santiago 2004-2005 were carried out to determine growth inhibition of yellow nutsedge (Cyperus esculentus L. and bermudagrass (Cynodon dactylon (L. Pers., growing on the plantation row, by mulch derived from a rye (Secale cereale L. cover crop established between grapevine (Vitis vinifera L. rows on overhead (cv. Flame Seedless and vertical (cv. Cabernet Sauvignon training. Spring mowing of the rye sown in the fall allowed for developing a thick and long lasting mulch along the grape rows. Nutsedge and bermudagrass control was 81 and 82%, respectively, and was more effective than conventional chemical (in the row + mechanical (between rows control. Glyphosate at 2% for nutsedge and 1% for bermudagrass control, applied twice (October and December, was insufficient to control either perennial weed adequately. Total broadleaved and grass/sedge weed control was 67.3 and 43.0% more effective with the rye mulch than with conventional treatments at Los Andes and Santiago, respectively. Perennial weed control levels could be explained as the new foliage of yellow nutsedge and bermudagrass was particularly susceptible to the shading provided by the rye mulch assembled prior to mid spring shoot emergence, and this effect remained active up until the beginning of autumn. The subsequent rye foliage mowing at the vegetative stage fully expressed the allelopathic effect produced by this local rye cultivar. The use of rye cover crop management and mulch could be applied as an effective weed control technique in conventional, as well as organic deciduous tree orchards.En dos ensayos de campo (Los Andes 1998-1999 y Santiago 2004-2005 se determinó el efecto inhibitorio sobre chufa (Cyperus esculentus L. y pasto bermuda (Cynodon dactylon (L. Pers. de residuos de centeno (Secale cereale L. establecido en otoño entre las hileras de vides (Vitis vinifera L. en parronal (cv. Flame Seedless y espaldera (cv. Cabernet Sauvignon

  7. Tractographie globale sous contraintes anatomiques

    OpenAIRE

    Teillac , Achille

    2017-01-01

    This work aims at developing a method inferring white matter fibers reconstructed using a global spin-glass approach constrained by anatomical prior knowledge. Unlike usual methods building fibers independently from one another, our markovian approach reconstructs the whole tractogram in an unique process by minimizing the global energy depending on the spin glass configuration (position, orientation, length and connection(s)) and the match with the local diffusion process in order to increas...

  8. Tutoriel Android sous Android Studio

    OpenAIRE

    Rodriguez , Dima

    2015-01-01

    Engineering school; Le système d’exploitation Android est actuellement l’OS le plus utilisé dans le monde faisant tourner des smartphones, tablettes, montres connectées, liseuses électroniques, télévisions interactives, et bien d'autres. C’est un système, open source qui utilise le noyau Linux. Il a été créée par Android, Inc. qui fut rachetée par Google en 2005. Le développement d’applications pour Android s’effectue en Java en utilisant des bibliothèques spécifiques. Le but de ce tutoriel e...

  9. SOUS LE PAVÉ: LA PLAGE!

    DEFF Research Database (Denmark)

    Clemmensen, Thomas Juel

    2017-01-01

    of these take their point of departure in the author’s observations of material conditions and processes on the harbor in Aarhus, which highlight the city as a geological phenomenon. But mostly the thoughts are inspired by works and ideas of artists and architects, which more or less consciously have revolved...

  10. Effect of cooking on the concentration of bioactive compounds in broccoli (Brassica oleracea var. Avenger) and cauliflower (Brassica oleracea var. Alphina F1) grown in an organic system.

    Science.gov (United States)

    Dos Reis, Luzia Caroline Ramos; de Oliveira, Viviani Ruffo; Hagen, Martine Elisabeth Kienzle; Jablonski, André; Flôres, Simone Hickmann; de Oliveira Rios, Alessandro

    2015-04-01

    Brassica vegetables have been shown to have antioxidant capacities due to the presence of carotenoids, flavonoids and vitamins. This study evaluates the influence of different processing conditions (boiling, steaming, microwaving and sous vide) on the stability of flavonoids, carotenoids and vitamin A in broccoli and cauliflower inflorescences grown in an organic system. Results indicated that sous vide processing resulted in greater antioxidant capacity and that all processes contributed in some way to an increased content of antioxidant compounds in both cauliflower and broccoli. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. Crack Features and Shear-Wave Splitting Associated with Fracture Extension during Hydraulic Stimulation of the Geothermal Reservoir in Soultz-sous-Forêts

    Directory of Open Access Journals (Sweden)

    Adelinet M.

    2016-05-01

    Full Text Available The recent tomography results obtained within the scope of the Enhanced Geothermal System (EGS European Soultz project led us to revisit the meso-fracturing properties of Soultz test site. In this paper, we develop a novel approach coupling effective medium modeling and shear-wave splitting to characterize the evolution of crack properties throughout the hydraulic stimulation process. The stimulation experiment performed in 2000 consisted of 3 successive injection steps spanning over 6 days. An accurate 4-D tomographic image was first carried out based upon the travel-times measured for the induced seismicity [Calò M., Dorbath C., Cornet F.H., Cuenot N. (2011 Large-scale aseismic motion identified through 4-D P-wave tomography, Geophys. J. Int. 186, 1295-1314]. The current study shows how to take advantage of the resulting compressional wave (Calò et al., 2011 and shear-wave velocity models. These are given as input data to an anisotropic effective medium model and converted into crack properties. In short, the effective medium model aims to estimate the impact of cracks on velocities. It refers to a crack-free matrix and 2 families of penny-shaped cracks with orientations in agreement with the main observed geological features: North-South strike and dip of 65°East and 65°West [Genter A., Traineau H. (1996 Analysis of macroscopic fractures in granite in the HDR geothermal well EPS-1, Soultz-sous-Forêts, France, J. Vol. Geoth. Res. 72, 121-141], respectively. The resulting output data are the spatial distributions of crack features (lengths and apertures within the 3-D geological formation. We point out that a flow rate increase results in a crack shortening in the area imaged by both compressional and shear waves, especially in the upper part of the reservoir. Conversely, the crack length, estimated during continuous injection rate phases, is higher than during the increasing injection rate phases. A possible explanation for this is that

  12. Caractérisation des systemes de production à base de maïs dans ...

    African Journals Online (AJOL)

    La présente recherche vise à caractériser les systèmes de production à base de maïs au Bénin pour un appui-conseil ciblé aux producteurs de maïs. La base de sondage est la base de données du sous-projet "Centre National de Spécialisation sur le Maïs", exécuté par l'Institut National des Recherches Agricoles du Bénin ...

  13. Sous-produits de la désinfection dans l'eau potable des petits réseaux municipaux: variabilité spatio-temporelle, modélisation et stratégies de suivi

    OpenAIRE

    Guilherme, Stéphanie

    2014-01-01

    Les trihalométhanes (THM) et les acides haloacétiques (AHA) constituent les seules familles réglementées de sous-produits de la désinfection (SPD). Les SPD sont des composés issus de la réaction de la matière organique naturelle présente dans l’eau et du désinfectant lors du traitement de l’eau potable. La plupart de ces composés ne sont pas réglementés, même si plusieurs études ont montré que certains SPD peuvent présenter un risque toxicologique plus important que les THM et les AHA. De nos...

  14. Méthode multi-échelle pour la modélisation du flambage des tôles minces sous contraintes résiduelles - Application au laminage

    OpenAIRE

    Nakhoul , Rebecca; Montmitonnet , Pierre; Potier-Ferry , Michel

    2013-01-01

    National audience; Dans le laminage à froid, l'apparition d'une distribution hétérogène de contraintes résiduelles peut engendrer le flambage de la tôle laminée, entraînant un " défaut de planéité ". L'objectif est de définir un modèle macroscopique simple décrivant les modes et amplitudes de flambage d'une tôle sous l'effet des contraintes résiduelles issues du laminage. Le présent article présente une nouvelle méthode bi-échelle [1,2] comme une alternative du modèle de flambage développé da...

  15. Sub-critical installations for continuous evaporations of up to 200 litres/hour - description and experimental results; Installations sous-critiques d'evaporation continue jusqu'a 200 litres/heure - description et resultats experimentaux

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, P; Bouzou, G C; Sautray, R R; Jacquotte, M C [Commissariat a l' Energie Atomique, Marcoule (France). Centre de Production de Plutonium de Marcoule

    1965-07-01

    In this report are given a detailed technological description and the test results obtained with two continuous evaporation units, one of 16 l/hr, the other of 65 l/hr. These installations are sub-critical with multiplication factors (k{sub eff}) for total reflection of 0.73 and 0.77. A third evaporator of 200 litres, also sub-critical (k{sub eff} = 0.90), is given as the limiting possible case. A description is also given of simple devices without regulator for maintaining a constant level in an extra flat, separator thus making it possible to operate without supervision in perfect safety at any concentration factor. The liberal thermal characteristics and the simple operational principles constitute a sure guarantee for operation in {alpha} and {gamma} conditions. (authors) [French] Dans ce rapport, on trouvera la description technologique detaillee et les resultats obtenus au cours des essais, de deux installations d'evaporation en continu, l'une de 16 l/h, l'autre de 65 l/h. Ces installations sont sous-critiques avec des facteurs de multiplication (k{sub eff}) en reflexion totale de 0,73 et 0,77. Un troisieme evaporateur, de 200 l/h, egalement sous-critique (k{sub eff} = 0,90), est donne comme cas limite realisable. On trouvera aussi la description de dispositifs simples, sans regulateur, permettant de garder un niveau constant dans un separateur extra-plat, ce qui permet une marche sans surveillance, en toute securite, a tous les facteurs de concentration. Les caracteristiques thermiques non poussees et les principes de fonctionnement simples, sont une garantie certaine pour l'exploitation en milieu {alpha} et {gamma}. (auteurs)

  16. KAKO PREDŠKOLSKA DJECA VIDE "BIG BROTHER" SHOW?

    OpenAIRE

    Janković, Andrea; Sindik, Joško; Jaman, Kamea

    2007-01-01

    Cilj istraživanja bio je ispitivanje nekih karakteristika gledanosti Big Brother show-a kod djece predškolske dobi, razloga gledanja te emisije, s aspekta preferiranih sadržaja emisije te ličnosti (kandidata) koje preferiraju djeca. Ispitan je prigodni uzorak djece srednje i starije vrtićke dobi iz 3 dječja vrtića iz Zagreba (Dječjeg vrtića Grigora Viteza i Dječjeg vrtića "Maksimir" i "Trnoružica", N = 142). Utvrđene su čestine razloga preferencije pojedinih sudionika show–a te pojedinih s...

  17. Međukulturalnost i kako nas vide drugi

    Directory of Open Access Journals (Sweden)

    Ana Ćavar

    2015-12-01

    Jednym z istotnych warunków osiągnięcia kompetencji międzykultu­rowych jest przezwyciężenie zbiorowych oraz indywidualnych stereotypów. Aby dowiedzieć się, czy istnieją stereotypowe obrazy/stereotypy o Chorwacji i Chorwatach wśród studentów zagranicznych, przeprowadziłyśmy ankietę wśród studentów slawistyki/kroatystyki na uczelnich zagranicznych. Celem badania było ułatwienie wprowadzenia podejścia międzykulturowego w naucza­niu języka chorwackiego na uniwersytetach.

  18. Carbon nano structures: Production and characterization

    Science.gov (United States)

    Beig Agha, Rosa

    recherche sur l'hydrogene (IRH). Nos echantillons presentaient toujours une grande quantite de carbure de fer au detriment de la formation de nanostructures de carbone. Apres plusieurs mois de recherche nous avons constate que les metaux de base, soit le fer et le cobalt, etaient contamines. Neanmoins, ces recherches nous ont enseigne beaucoup et les resultats sont presentes aux Appendices I a III. Le carbone de depart est du charbon active commercial (CNS201) qui a ete prealablement chauffe a 1,000°C sous vide pendant 90 minutes pour se debarrasser de toute humidite et autres impuretes. En premiere etape, dans un creuset d'acier durci du CNS201 pretraite fut melange a une certaine quantite de Fe et de Co (99.9 % purs). Des proportions typiques sont 50 pd. %, 44 pd. %, et 6 pd. % pour le C, le Fe, et le Co respectivement. Pour les echantillons prepares avec le broyeur SPEX, trois a six billes en acier durci furent utilisees pour le broyage, de masse relative echantillon/poudre de 35 a 1. Pour les echantillons prepares avec le broyeur planetaire, trente-six billes en acier durci furent utilisees pour le broyage, de masse relative echantillon/poudre de 10 a 1. L'hydrogene fut alors introduit dans le creuset pour les deux types de broyeur a une pression de 1.4 MPa, et l'echantillon fut broye pendant 12 h pour le SPEX et 24 h pour le planetaire. Le broyeur SPEX a un rendement de transfert d'energie mecanique plus grand qu'un broyeur planetaire, mais il a le desavantage de contaminer davantage l'echantillon en Fe par attrition. Cependant, ceci peut etre neglige vu que le Fe etait un des catalyseurs metalliques ajoutes au creuset. En deuxieme etape, l'echantillon broye est transfere sous gaz inerte (argon) dans un tube en quartz, qui est alors chauffe a 700°C pendant 90 minutes. Des mesures de patrons de diffraction a rayons-X sur poudre furent faites pour caracteriser les changements structurels des CNS lors des etapes de synthese. Ces mesures furent prises avec un

  19. Present Status of Nitrogen Fixation by Reactor Radiation; Etat Actuel des Recherches sur l'oxydation directe de l'azote sous irradiation dans des reacteurs; Sovremennoe sostoyani opytov po okisleniyu azota izlucheniem iz reaktorov; Estado actual de las investigaciones sobre fijacion del nitrogeno por irradiacion en reactores

    Energy Technology Data Exchange (ETDEWEB)

    Harteck, P; Dondes, S [Rensselaer Polytechnic Institute, Troy, NY (United States)

    1960-07-15

    Investigations in nitrogen fixation by reactor radiation which have been carried out at Rensselear and Brookhaven National Laboratory for a number of years, have used the fission recoil energy directly as ionizing radiation by means of the dispersion of U{sup 235} in glass fibers about five microns in diameter. The effects of temperature, pressure and nitrogen-oxygen ratio on the G-value for nitrogen fixation have been determined and reported in the literature. A brief summary of this work is given. The above work has been done in static systems; more recent work has involved both static and flow systems. In static systems, major emphasis has been placed on the effect of radiation intensity especially at the kinetic radiation equilibrium. It has been found that the production of N0{sub 2} and N{sub 2}0 in 4:1 and 2:1 nitrogen-oxygen mixtures proceeds to the point of total oxygen consumption. A flow (cycling) system is now operating in a loop in the Brookhaven reactor. Data are presented on the effects of temperature, pressure, mixture ratio and radiation intensity which may be applied to the design of a future chemonuclear reactor. The present system is operating at 10 atmospheres and 150{sup o}C. The temperature is a function of the fission energy released in the glass fibers and the heat resistance of the loop. Another loop to operate at 50 - 75 atmospheres and 600{sup o}C is under construction. These loops make possible the evaluation of the characteristics of a continuous system, including the behaviour of the fission products released in the gas stream. The complicated kinetics of nitrogen oxidation are outlined in three stages: initial reactions in the systems, reactions after some fixed nitrogen has been produced, and finally the kinetics at radiation equilibrium. The conditions for the formation of N{sub 2}0{sub 3}, N{sub 2}0{sub 4} and O{sub 3} are considered, together with their effects and the overall process. (author) [French] Des recherches sur l

  20. Development of Radiation-Sterilized Sea Food Products. I. Enzyme-Inactivated Cod and Halibut Patties; Essais de Radiosterilisation des Produits Alimentaires d'Origine Marine. I. Pates de Morue et de Fletan a Enzymes Inactives; Primenenie izlucheniya dlya sterilizatsii morskikh pishchevykh produktov; Preparacion de Alimentos de Origen Marino Esterilizados por Irradiacion. I. Pastelillos de Bacalao y de Hipogloso con Enzimas Inactivadas

    Energy Technology Data Exchange (ETDEWEB)

    Sinnhuber, R. O.; Landers, Mary K.; Yu, T. C. [Department of Food Science And Technology, Oregon State University, Corvallis, OR (United States); Simon, M.; Heiligman, F. [United States Army Natick Laboratories, Natick, MA (United States)

    1966-11-15

    Radiation-sterilized enzyme-inactivated cod (Gadus macrocephalus) and halibut (Hippoglossus stenolepsis) patties or cakes were developed which show promise as commercial products. They were prepared by incorporating the comminuted fish with white corn meal, gelatin, and salt and forming the mixture into sausages. Enzymes were inactivated by heating the sausages in a boiling water-bath. After cooling overnight to set the protein, the sausages were sliced into 3/8-in-thick patties, packed in cans and given a radiation dose of 4.5 Mrad. The radiation sterilized products were stored for 12 months at 72 Degree-Sign F with periodic evaluations to assess the quality and the effect of various treatments. The treatments included vacuum packing, the addition of various antioxidants, and the use of charcoal packets. The products just prior to serving were dipped in batter and breading and deep-fried. The fish patties were evaluated by flavorpanels and objective measurements, such as total volatile bases, 2-thiobarbituric acid number, pH and colorrreflectance values. The products received acceptable flavor scores from preference panels (140 to 170 judges) during twelve months of storage at 72 Degree-Sign F. Although the panels preferred the non-irradiated control samples to the irradiated samples after 12 months, all stored irradiated patties scored on the ''like'' side of the 9-point hedonic scale. The color-reflectance values of radiation-sterilized seafood products can be used as a measure of the radiation-induced browning and seemed to correlate with length of storage. (author) [French] Les auteurs ont mis au point des pates ou hachis de morue (Gadus macrocephalus) et de fletan (Hippoglossus stenolepsis) a enzymes inactives, sterilises par rayonnement, qui semblent pouvoir etre commercialises. Ils ont ete prepares par malaxage du poisson finement hache avec de la farine de mais blanche, de la gelatine et du sel, le melange etant debite sous forme de saucisses. Les enzymes

  1. Quantification de la Charge Virale et tests de résistance du VIH-1 aux ARV à partir d’échantillons DBS (Dried Blood Spots chez des patients Guinéens sous traitement antirétroviral

    Directory of Open Access Journals (Sweden)

    Nestor Bangoura

    2015-06-01

    Full Text Available Problématique: Comme dans plusieurs pays du Sud, le suivi virologique des patients sous traitement antirétroviral (TARV en Guinée est timide voire inexistant dans certaines localités. Le but de cette étude était d’évaluer la faisabilité technique et logistique de l’utilisation des DBS dans les tests de charge virale (CV et de génotypage. Méthode: De septembre à octobre 2010, les DBS ont été préparés à partir de prélèvements sanguins de patients adultes sous TARV. Le délai d’envoi des échantillons au laboratoire de référence était de 30 jours maximum après le prélèvement et se faisait à température ambiante. La CV a été quantifiée et les échantillons de patients en échec virologique (CV ≥ 3 log10 copies/mL ont été génotypés selon le protocole de l’ANRS. L’algorithme de Stanford version 6.0.8 a été utilisé pour l’analyse et l’interprétation des mutations de résistance. Résultats: Parmi les 136 patients inclus, 129 et 7 étaient respectivement sous première et deuxième ligne de traitement avec une médiane de suivi de 35 mois [IQR: 6-108]. L’échec virologique a été noté chez 33 patients. Parmi eux, 84.8% (n = 28/33 ont bénéficié d’ungénotypage. Le taux de résistance global était de 14% (n = 19/136. Le CRF02_AG était le sous type viral le plus prévalent (82%; n = 23. Conclusion: En plus de montrer la faisabilité technique et logistique des tests de CV et de génotypage à partir des DBS, ces résultats montrent l’intérêt de leurs utilisations dans le suivi virologique des patients sous TARV. Cette étude a permis également de documenter l’échec virologique, la résistance aux ARV et la diversité génétique du VIH-1 en Guinée. Mots clés: VIH-1, Résistance aux ARV, DBS (Dried Blood Spots, Guinée Conakry, Génotypage,Charge Virale.   Quantification of Viral load and resistance tests of HIV-1 to ARVs from dried blood spotssamples in Guinean patients undergoing

  2. Irradiation of Poultry and Egg Products; Irradiation de la Volaille et des Ceufs et Derives; Obluchenie domashnej ptitsy, yaits i izdelij iz nikh; Irradiacion de Volateria, Huevos y Productos Derivados

    Energy Technology Data Exchange (ETDEWEB)

    Thornley, Margaret J. [Sub-Department of Chemical Microbiology, Department of Biochemistry, University of Cambridge, Cambridge (United Kingdom)

    1966-11-15

    may be altered, giving rather different off odours. The application of this process to British conditions for production and distribution of broiler chickens has been studied, and a joint investigation by the United States Atomic Energy Commission, the Atomic Energy of Canada Ltd., and the United States Army Material Command's Natick Laboratories is now in progress. This will cover economic needs and advantages, wholesomeness, product development, packaging and consumer acceptance. (author) [French] La volaille et les oeufs et derives peuvent etre avantageusement traites par divers procedes d'irradiation, selon les circonstances. S'il s'agit de contamination par Salmonella, on peut recourir a la radicidation a des doses de Tordre de 0,5 Mrad. Ce procede est particulierement interessant pour le traitement de produits congeles, tels les oeufs entiers et certaines volailles, notamment le canard. Les derives deshydrates de l'oeuf peuvent egalement etre traites de cette facon. Cette application est expose en detail par d'autres auteurs (Ley et Mossel [2,3]). Le traitement de volailles entieres en vue de leur conservation indefinie (radappertisation) peut etre effectue a des doses de 4,5 Mrad. Pour prevenir certaines alterations du gout, il faut cependant combiner l'irradiation a d'autres procedes, par exemple: traitement thermique prealable pour inactiver les enzymes, irradiation a l'etat congele, en emballage sous vide ou contenant une atmosphere d'azote ou du charbon de bois active; en outre, certains modes de cuisson sont quelquefois recommandes. Ces methodes sont interessantes pour les usages de l'armee et ont ete longuement experimentees pour le programme de recherche de l'Armee des Etats-Unis. La radurisation de la volaille, destinee a prolonger la duree de conservation par l'inactivation de la plupart des micro-organismes corrupteurs, est commercialement interessante. On peut utiliser des doses de 0,15 a 0,25 Mrad sans provoquer d'alterations desagreables du gout

  3. Effect of added phosphate and type of cooking method on physico-chemical and sensory features of cooked lamb loins.

    Science.gov (United States)

    Roldán, Mar; Antequera, Teresa; Pérez-Palacios, Trinidad; Ruiz, Jorge

    2014-05-01

    This study evaluated the effect of brining with phosphates on the physico-chemical and sensory features of sous-vide and roasted cooked lamb. Lamb loins (n=48) were injected with either 10% w/w of distilled water or a solution containing 0.2% or 0.4% (w/v) of a mixture of phosphate salts. After injection, samples were either sous-vide cooked (12h-60°C) or oven roasted (180°C until 73°C of core temp.). Expressible moisture, cooking loss, instrumental color, pH, water holding capacity, instrumental texture and sensory properties were evaluated. Brining with phosphates led to lower cooking loss in both sous-vide and oven roasted samples, but only the former showed significantly higher moisture content. Phosphates increased instrumental hardness and shear force values in sous-vide samples, while this effect was not as evident in roasted ones. Toughness was reduced and juiciness was improved as a consequence of phosphate addition. Overall, injection of a phosphate solution appears as a potential procedure for improving sensory textural features of cooked lamb whole cuts. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Measurement of the Anisotropy of Diffusion Constant in Media with Empty Channels; Mesure de l'Anisotropie de la Constante de Diffusion dans des Milieux a Canaux Vides; Izmerenie anizotropii postoyannoj diffuzii v srede s pustymi kanalami; Medicion de la Anisotropia de la Constante de Difusion en Varios Sistemas con Canales Vacios

    Energy Technology Data Exchange (ETDEWEB)

    Copic, M.; Kalin, T.; Pregl, G.; Zerdin, F. [Nuclear Institute Jozef Stefan, Ljubljana, Yugoslavia (Slovenia)

    1964-04-15

    Using the pulsed-neutron source technique, the diffusion constant was measured in systems with empty channels. Plexiglas was used as the neutron diffusing material. From separate sets of measurements on rectangular blocks the diffusion constants parallel and perpendicular to channels were determined. The average value of the diffusion constant was also obtained experimentally from measurements on cubes. The difference between both diffusion constants, D{sub Double-Up-Tack} - D{sub Up-Tack }, agrees with theoretical predictions inside the limits of experimental errors, yet the average diffusion constant lies systematically below the predictions of Behrens' theory. (author) [French] En se servant de la methode de la source des neutrons puises, les auteurs ont mesure la constante de diffusion dans des systemes a canaux vides. Comme matiere diffusant les neutrons, ils ont utilise du plexiglas. A partir de series de mesures differentes faites sur des blocs rectangulaires, ils ont determine les constantes de diffusion parallele et perpendiculaire aux canaux. Ils ont egalement obtenu experimentalement la valeiir moyenne de la constante de diffusion a i'aide de mesures faites sur des cubes. La difference entre les deux constantes de diffusion, D{sub Double-Up-Tack} - D{sub Up-Tack }, concorde avec les previsions theoriques dans les limites des erreurs d'experience; cependant, la valeur moyenne de la constante de diffusion reste systematiquement inferieure aux previsions etablies par la theorie de Behrens. (author) [Spanish] Utilizando la tecnica de la fuente neutronica pulsada, los autores midieron la constante de difusion en varios sistemas con canales vacios. Como material difusor de neutrones emplearon polimetacrilato de metilo. Basandose en varias series de mediciones efectuadas en bloques rectangulares, los autores determinaron las constantes de difusion Inverted-Question-Mark n sentido paralelo y perpendicular a los canales. Obtuvieron experimentalmente el valor

  5. Treatment of solutions of fission products - Separation of caesium-137; Traitement des solutions de produits de fission - Separation du cesium-137; Obrabotka rastvorov produktov deleniya - Razdelenie tseziya-137; Tratamiento de soluciones de productos de fision - Separacion del cesio-137

    Energy Technology Data Exchange (ETDEWEB)

    Stiennon-Bovy, R [Centre d' Etude de l' Energie Nucleaire, Mol (Belgium); Gvion, R [Commission Israelienne de l' Energie Atomique, Tel-Aviv (Israel)

    1962-01-15

    For the industrial recovery of caesium-137 from solutions of fission products, the authors utilized the analytical method for determination of caesium by dipicrylamine, adapting it to use on an industrial scale and to the high level of the activities encountered. The process recommended makes it possible both to isolate caesium as a chloride and to recover the precipitation reagent, in one and the same operation. A basic method is suggested. The authors studied the effect of radiation on dipicrylamine and its compounds, this effect proving to be practically nil for solid compounds and negligible for their solutions. The entrainment of caesium by ammonia ion was also studied. The advantages of the proposed process are : high decontamination of the caesium, simple operation and free recycling fo the reagent, high yield for caesium recovery and for dipicrylamine, considerable concentration of caesium activity, operation at room temperature and possibility of continuous operation. By this process caesium can be recovered before certain fission products are eliminated. (author) [French] Pour la recuperation industrielle du cesium-137 des solutions de produits de fission, les auteurs ont adapte le procede analytique de dosage du cesium par la dipicrylamine a l'echelle industrielle et au niveau eleve des activites traitees. Le procede preconise permet en une seule operation d'isoler le cesium sous forme de chlorure et de recuperer aisement le reactif de precipitation; un schema de principe est propose. Les auteurs ont etudie l'effet des radiations sur la dipicrylamine et ses composes; cet effet s'avere pratiquement nul pour les composes solides et negligeable pour leurs solutions. L'entrainement du cesium par l'ion ammoniaque est etudie. Les avantages du procede propose sont la decontamination elevee du cesium, la simplicite du mode operatoire avec recyclage aise du reactif, le rendement eleve pour la recuperation du cesium et pour la dipicrylamine, une concentration

  6. A fly-wheel drive with controlled-torque clutch for a reactors cooling circuit pumps; Entrainement des pompes du circuit de refrigeration d'un reacteur par volant a embrayage sous couple controle

    Energy Technology Data Exchange (ETDEWEB)

    Riettini, A [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-10-15

    After a theoretical study on the slowing down of a centrifugal pump, the motion equations have been checked by means of experimental tests. In order to have important slowing down times (which is the case of the cooling pumps of a research reactor) it is necessary to add a fly-wheel. To prevent troubles when starting, a block pump-fly-wheel with clutch under controlled torque was developed. It is so possible to start the fly-wheel progressively without increasing too much power of the driving motor. (author) [French] Apres une etude theorique sur le mouvement de ralentissement d'une pompe centrifuge, les equations du mouvement ont ete verifiees par des essais pratiques. Pour obtenir des temps de ralentissement importants (cas des pompes de refrigeration d'un reacteur de recherche) il est necessaire d'y adjoindre un volant d'inertie. Pour eviter les inconvenients au demarrage, on a etudie un ensemble pompe-volant avec embrayage sous couple controle. Cette solution permet de lancer progressivement le volant sans augmentation appreciable de la puissance du moteur d'entrainement. (auteur)

  7. Les sols de la moyenne vallée du fleuve Sénégal : caractéristiques et évolution sous irrigation

    OpenAIRE

    Boivin, Pascal; Favre, F.; Maeght, J.L.

    1998-01-01

    Les sols alluviaux de la moyenne vallée du fleuve Sénégal, développés en climat aride, sont l'objet d'aménagements hydro-agricoles visant à développer les productions irriguées. Pour l'instant, la riziculture est la production principale, complétée par du maraîchage. Ces dépôts fluviaux et fluvio-marins récents sont organisés en unités géomorphologiques. Les bourrelets de berge des multiples bras du fleuve Sénégal sont des formations de texture argilo-sablo-limoneuse. Les cuvettes de décantat...

  8. Chemical stimulation techniques for geothermal wells: experiments on the three-well EGS system at Soultz-sous-Forêts, France

    OpenAIRE

    Portier, Sandrine; Vuataz, François-David; Nami, Patrick; Sanjuan, Bernard; Gérard, André

    2012-01-01

    Rock matrix stimulation is a method of enhancing well production or injection within a broad range of challenging environments, varying from naturally fractured limestones to sandstones with complex mineralogy. A common and often successful stimulation option, matrix acidizing, utilizes acids that react and remove mineral phases restricting fluid flow. Reviewed is the technology of chemical treatments available for oil, gas and geothermal wells and the key elements and results of the chemical...

  9. Protected meat products in Hungary – local foods and hungaricums

    Directory of Open Access Journals (Sweden)

    Ágnes Kovács

    2007-06-01

    Full Text Available Les auteurs de cette étude présentent une vue d'ensemble sur la production locale des produits carnés en Hongrie, en tenant compte de la législation de l'UE, les indications géographiques protégées (IGP et la désignation de l'origine. La collection des produits carnés Régionaux Hongrois conforme avec le programme national « Traditions – Goûts – Régions » (TGR, en abréviation hongroise: HÍR, est listée. Ce programme fut entamé en 1998, sous l'égide du Ministère de l'Agriculture et du Développement Rural. L’inventaire réalisé comprend 300 produits agricoles, provenant de 9 régions différentes de la Hongrie. Après l'accession de la Hongrie à L'UE, 11 produits ont été soumis à la Commission de la Protection de l'Origine. Actuellement, ces produits se trouvent provisoirement sous une protection nationale.The authors present an overview of the development of Hungarian high quality regional meat products under EU legislation for protection of geographical indications and designation of origin, and conforming to Hungary’s national program – Traditions, Tastes, Regions (TTR, Hungarian abbreviation: HÍR, launched in 1998 by the Ministry of Agriculture and Rural Development and covering 300 agricultural products from nine regions. After Accession, 11 products were submitted for Protected Designation of Origin (PDO, four of which are meat products. A categorization of Hungarian consumers shows that there is a remarkable heritage of agricultural products and traditional manufacturing methods that offers considerable potential for producers within an increasingly diverse and quality-oriented EU food market.

  10. Hydrates plugs dissociation in pipelines; Dissociation des bouchons d'hydrates de gaz dans les conduites petrolieres sous-marines

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen Hong, D.

    2005-03-15

    Natural gas hydrates plugs cause problems during drilling, well operations, production, transportation and processing of oil and gas. Especially, it is a very serious problem in off-shore oil transportation where low temperature and high pressure become more and more favourable to gas hydrate formation as the new production wells are more and more deeper. Up to now, although many studies have been developed concerning the possibility of preventing pipe plugging, there is limited information in open literature on hydrate plugs dissociation and all models in literature are numerically complicated. In this study, hydrate plugs are formed from water in n-dodecane mixture with addition of a dispersant E102B in two different experimental apparatus in order to obtain hydrates plugs with different sizes (diameter of 7, 10.75 and 12 cm). Then, the plugs are dissociated by the method of two-sided depressurization. In this paper, we propose a numerical model which describes the dissociation of gas hydrate plugs in pipelines. The numerical model, which is constructed for cylindrical coordinates and for two-sided pressurization, is based on enthalpy method. We present also an approximate analytical model which has an average error 2.7 % in comparison with the numerical model. The excellent agreement between our experimental results, literature data and the two models shows that the models give a good prediction independently of the pipeline diameter, plug porosity and gas. The simplicity of the analytical model will make it easier in industrial applications. (author)

  11. Les littératures contemporaines sous l´angle du concept de nation = As literaturas contemporâneas sob o aspecto do conceito de nação

    Directory of Open Access Journals (Sweden)

    Dominique Marie Philippe Geneviève Boxus

    2009-01-01

    Full Text Available Devant l´actuelle déstabilisation du concept de nation en contexte demondialisation, quelles sont la pertinence et l´actualité d´une étude des littératures contemporaines sous l´angle de la nation ? Faut-il constater l´obsolescence du concept de littérature nationale ? Pour sortir d´une impasse théorique, la perspective historique s´avèreindispensable et une étude des avatars de la nation, concept et réalité, met sur la voie d´une vision élargie où la nation est révélée comme représentation: fiction symbolique ou mythe.À côté d´un modèle mythique hégémonique privilégiant l´homogène, un autre modèle national est identifié, caractérisé par l´hétérogène et servant d´auxiliaire aux collectivités excentriques en quête d´une identification. Comme expression privilégiée du mythe de lanation, la littérature joue un rôle fondamental dans l´invention de représentations nationales inédites, ce qui justifie la pérennité d´une recherche (sociologique et/ou thématique centrée sur le littéraire contemporain (ou passé, pourvu qu´elle opère à partird´un point de vue actualisé envisagé sous l´angle de la nation.Diante da atual desestabilização do conceito de nação em contexto de globalização, quais são a pertinência e a atualidade de um estudo das literaturas contemporâneas sob o ângulo da nação? Haverá de se constatar a obsolescência do conceito de literatura nacional? Para sair de um impasse teórico, apresenta-se uma história do conceito de nação, desde suas origens no século XVIII até os dias de hoje. Abre-se caminho para uma visão ampliada da nação, ou seja, para uma definição que a revela como representação: ficção simbólica ou mito. Ao lado de um modelo mítico hegemônico que privilegia o homogêneo, um outro modelo nacional é identificado, caracterizado pelo heterogêneo e auxiliando coletividades ex-cêntricas no seu esforço de identificação. Sendo uma

  12. Installation et Configuration Centralisées et Automatisées d’une Ferme de Serveur sous SLC6

    CERN Document Server

    Tourneyre, Stéphane; Mesnard, Emmanuel

    This report aims to present a study of the change of system installation and configuration of Linux servers with the distribution of Scientific Linux CERN (SLC) within the LHCb experiment at CERN. These servers are primarily used to sort the output data of various sensors detectors proton collisions. It was planned to explore a solution based software Cobbler / Puppet to replace the existing software, Quattor, to help install and configure automatically. First, these tests should be done on virtual machines and then putting these tools in real conditions with machines without hard disk, such as those in production. Currently, the use of software to allow configuration automates Puppet works and meets the expectations of the project manager, Niko Neufeld. Cobbler on, after various tests, it fails to meet our expectations fully. Therefore a thorough study should be continued or finding another software or by adapting Cobbler. For the part of the machines without hard disk, it should be done before the end of...

  13. La multiplication végétative du goyavier Psidium guayava L. sous climat soudano sahélien du nord Cameroun

    Directory of Open Access Journals (Sweden)

    Hamasselbé, A.

    2005-01-01

    Full Text Available Vegetative Propagation of Guyava Psidium L. Guavaya under Sudano Sahelian Climate in the North Cameroon. Goyava (Psidium guajava L. is a fruit tree, which is well suited to the climate of north Cameroon. After three years of mass selection at Kismatari fruit tree research station, release into farmers' fields of the high yielding selected plant material was not possible due to lake of multiplication techniques adapted to the agro-climatic conditions of this fruit tree station. Preliminary results of vegetative propagation trials showed that grafting and aerial layering are not practicable at Kismatari station. Terrestrial layering is the most adapted multiplication technique for a massive production of homogeneous plant material to meet research and farmers' needs.

  14. Internal targeted radiotherapy for bone metastasis: what about underlying physiopathology; Radiotherapie interne vectorisee (metabolique) des metastases osseuses: quid de la physiopathologie sous-jacente?

    Energy Technology Data Exchange (ETDEWEB)

    Vuillez, J.Ph. [Centre Hospitalier Universitaire, Hopital Michallon, Service de Biophysique et Medecine Nucleaire, 38 - Grenoble (France); Laval, G. [Centre Hospitalier Universitaire, Hopital Michallon, Unite de Recherche et de Soutien en Soins Palliatifs, 38 - Grenoble (France)

    2006-03-15

    Once tumours metastasize to bone, they are usually incurable and responsible for several devastating consequences: severe pain, pathologic fractures, life-threatening hypercalcemia, spinal cord compression and other nerve-compression syndromes. Understanding of physiopathological mechanisms responsible for these symptoms is critical for therapeutic approach, especially pain treatments. Three types of pain occur in tumour bone involvement: tonic or background pain, which are deep non-specific ache rising in intensity as the disease progresses; incident pain on movement (allodynia); and spontaneous pain which can be severe. Bone metastases could be osteolytic or osteoblastic. However, this classification actually represents two extremes of a continuum characterized by dys-regulation of the normal bone remodeling process. Biochemical mediators production is crucial as a part of this process. The bone microenvironment plays a critical role in the formation of osteoclasts through the production of macrophage colony-stimulating factor, receptor activator of nuclear factor kB ligand (RANKL)... Many of these mediators of osteolysis also have been shown to activate nociceptors: prostaglandins A and E, IL-1, IL-6, TNF. Thus there is a link between osteolytic destruction, inflammation and pain. It explains that severe pain could occur independently from fractures and in absence of any bone structure alteration and nervous compression. Also, pain is often disproportionate to tumour size or degree of bone involvement. Inflammatory and osteolytic processes depend on number, localization and organization of tumour cells inside bone and bone marrow tissues. All these parameters are crucial to take into account for a good understanding of treatments mechanisms of action, especially anti-inflammatory drugs (corticosteroid and others), bi-phosphonates, internal radiotherapy (strontium 89 or radiolabelled bi-phosphonates), external radiotherapy and chemotherapy or hormonotherapy

  15. Study of the machining of uranium carbide rods obtained by continuous casting under electronic bombardment; Etude de l'usinage de barreaux de carbure d'uranium obtenus par coulee continue sous bombardement electronique

    Energy Technology Data Exchange (ETDEWEB)

    Rousset, P; Accary, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The authors consider the various methods of machining uranium mono-carbide and compare them critically in the case of their application to uranium carbide obtained by fusion under an electronic bombardment and continuous casting. This study leads them to propose two mechanical machining methods: cylindrical rectification and center-less rectification, preceded by a preliminary roughing out of a cylinder, the latter appearing more suitable. A study of the machining yields as a function of the diameter of the rough bars and of the diameter of the finished rods has shown that an optimum value of the rough bar diameter exists for each value of the finished rod diameter. It is found that the yield increases as the diameter itself increases, this yield rising from 45 per cent to around 70 per cent as the diameter of the rough bars increases from 25-26 mm to 37-38 mm. (authors) [French] Les auteurs envisagent les differentes methodes d'usinage du monocarbure d'uranium et se livrent a une etude critique de celles-ci, dans le cas de leur application a l'usinage de barreaux de carbure d'uranium obtenus par fusion sous bombardement electronique et coulee continue. Cette etude les conduit a proposer deux methodes d'usinage mecanique: la rectification cylindrique et la rectification 'centerless', precedee d'un ebauchage par carottage, la seconde paraissant la plus appropriee. L'etude des rendements d'usinage en fonction du diametre des barreaux bruts et du diametre des barreaux finis, a mis en evidence une valeur optimale du diametre des barreaux bruts pour chaque valeur du diametre des barreaux usines. Elle a montre que le rendement croit lorsque le diametre croit lui-meme, ce rendement passant d'environ 45 pour cent a environ 70 pour cent, lorsque le diametre des barreaux bruts passe de 25-26 mm a 37-38 mm.

  16. The compatibility of chromium-aluminium steels with high pressure carbon dioxid at intermediate- temperatures; Compatibilite des aciers au chrome-aluminium avec le gaz carbonique sous pression aux temperatures moyennes

    Energy Technology Data Exchange (ETDEWEB)

    Leclercq, D; Loriers, H; David, R; Darras, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    With a view to their use in the exchangers of nuclear reactors of the graphite-gas or heavy water-gas types, the behaviour of chromium-aluminium steels containing up to 7 per cent chromium and 1.5 per cent aluminium has been studied in the presence of high-pressure carbon dioxide at temperatures of between 400 and 700 deg. C. The two most interesting grades of steel (2 per cent Cr - 0.35 per cent Al - 0.35 per cent Mo and 7 per cent Cr - 1.5 per cent Al - 0.6 per cent Si) are still compatible with carbon dioxide up to 550 and 600 deg. C respectively. A hot dip aluminised coating considerably increases resistance to oxidation of the first grade and should make possible its use up to temperatures of at least 600 deg. C. (authors) [French] Dans l'optique de leur emploi dans les echangeurs de reacteurs nucleaires des filieres graphite-gaz ou eau lourde-gaz, le comportement en presence de gaz carbonique sous pression d'aciers au chrome-aluminium, contenant jusqu'a 7 pour cent de chrome et 1,5 pour cent d'aluminium a ete etudie entre 400 et 700 deg. C. Les deux nuances les plus interessantes (2 pour cent Cr - 0,35 pour cent Al - 0,35 pour cent Mo et 7 pour cent Cr - 1,5 pour cent Al - 0,6 pour cent Si) restent compatibles avec le gaz carbonique jusqu'a 550 et 600 deg. C respectivement. Un revetement d'aluminium, effectue par immersion dans un bain fondu, ameliore notablement la resistance a l'oxydation de la premiere et doit permettre son empioi jusqu'a 600 deg. C au moins. (auteurs)

  17. Radiation enhanced thermal diffusion of chlorine in uranium dioxide; Diffusion thermique et sous irradiation du chlore dans le dioxyde d'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Pipon, Yves [Ecole doctorale de physique et d' astrophysique, Universite Claude Bernard Lyon-I, Lyon (France)

    2006-12-15

    This work concerns the study of the thermal and radiation enhanced diffusion of {sup 36}Cl in uranium dioxide. It is a contribution to PRECCI programme (research programme on the long-term behaviour of the spent nuclear fuel). {sup 36}Cl is a long lived volatile activation product (T = 300 000 years) able to contribute significantly to the instant release fraction in geological disposal conditions. We simulated the presence of {sup 36}Cl by implanting a quantity of {sup 37}Cl comparable to the impurity content of chlorine in UO{sub 2}. In order to evaluate the diffusion properties of chlorine in the fuel and in particular to assess the influence of the irradiation defects, we performed two kinds of experiments: - the influence of the temperature was studied by carrying out thermal annealings in the temperature range 900 - 1300 deg. C; we showed that implanted chlorine was mobile from temperatures as low as 1000 deg. C and determined a thermal diffusion coefficient D{sub 1000} {sub deg.} {sub C} around 10{sup -16} cm{sup 2}s{sup -1} and deduced an activation energy of 4.3 eV. This value is one of lowest compared to that of volatile fission products such as iodine or the xenon. These parameters reflect the very mobile behaviour of chlorine; - the irradiation effects induced by fission products were studied by irradiating the samples with {sup 127}I (energy of 63.5 MeV). We showed that the implanted chlorine diffusion in the temperature range 30 - 250 deg. C is not purely athermal. In these conditions, the diffusion coefficient D{sub 250} {sub deg.} {sub C} for the implanted chlorine is around 10{sup -14} cm{sup 2}s{sup -1} and the activation energy is calculated to be 0.1 eV. Moreover, at 250 deg. C, we observed an important transport of the pristine chlorine from the bulk towards the surface. This chlorine comes from a zone where the defects are mainly produced by the nuclear energy loss process at the end of iodine range. We showed the importance of the

  18. Wet skins tanning with chromium in dense CO{sub 2} under pressure; Tannage au chrome de peaux humides en CO{sub 2} dense sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Saldinari, L. [Tanneries Roux SA, 26 - Romans Sur Isere (France)]|[Tanneries du Puy (France)]|[Tanneries d' Annonay, 07 (France); Dutel, Ch. [Societe ATC (France); Perre, Ch. [CEA Centre de Pierrelatte (DCC/DTE/SLC), 26 (France)

    2000-07-01

    An ancestral gesture steadily improved through the centuries, the transformation of skins into leather includes several stages of which the principal one is tanning. Today, 90 % of the world's leather products are tanned with chromium. However, this stage is an environmental liability, and reducing the volume and chromium content of the waste has become a major issue. A first study on skin degreasing by dense CO{sub 2} helped sharply reduce the volume of the fatty effluents. To replace water by dense CO{sub 2} as the tanning medium was the logical next step. The present study was carried out in cooperation with three tanneries in the Rhone-Alpes-Auvergne area of France and a manufacturer of tanning materials. The difficulty of the study was the chemically opposed character of the two media involved. CO{sub 2} is a non-polar and lipophilic solvent while inorganic chromium is insoluble. The water present in the treated skin is a polar and ionic reaction medium and one of the reagents in tanning chemistry. The mixture of these two partially miscible compounds gives a pH 3 by carbonic acid formation. Tanning is based on the reactivity of collagen, the main component of the skin, with hydroxylated complexes of chromium. Collagen is a protein containing some chemical functions, amines (R-NH{sub 2}) and carboxylic (R-COOH) for example. These functions impart an amphoteric character to the compound. The WERNER theory of complex salts explains the formation of hydroxylated complexes of chromium and their fixing on the carboxylic functions of collagen by oxolation. pH is the key parameter in tanning. The success of the process demands chromium impregnation without fixing it at a pH lower than 5, and then to fix it by increasing the pH. This opened two alternatives for transferring chromium in the skin: solubilize chromium in CO{sub 2} via soluble organometallic complexes; or put the chromium salt into suspension without solubilizing it. The best results were obtained

  19. Study of cements silicate phases hydrated under high pressure and high temperature; Etude des phases silicatees du ciment hydrate sous haute pression et haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Meducin, F.

    2001-10-01

    {alpha}-C{sub 2}SH is also produced. Compression tests are done to correlate macroscopic behavior and physico chemical properties of the products. With super-plasticizers, samples porosity is lower and the 28-day aged samples recover the Young modulus they had at the early stage of hydration. (author)

  20. Some aspects of nuclear graphite production in France; Etude generale sur les graphites nucleaires produits en France

    Energy Technology Data Exchange (ETDEWEB)

    Gueron, J; Hering, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Legendre, A [Pechiney, 75 - Paris (France)

    1958-07-01

    1) Manufacturing: A summary and results on the CEA-Pechiney purification process are given. Variations in the preparation of green pastes and their effects on graphitized material are described. 2) Physical and mechanical properties: Results are given on: - Statistics of dimensional variatior products having square cross-section. - Statistical variation of thermal expansion coefficients and of electrical conductivity. - Density of normals to carbon layer planes and their connexion with thermal expansion. - Stress-strain cycles and conclusions drawn therefrom. - Mechanical resistance and gas permeability of items for supporting fuel elements. 3) Behaviour under radiation: Alteration under radiation of French graphites irradiated either in G1 pile or in experimental piles, and thermal annealing of those alterations, are given. (author)Fren. [French] 1) Fabrication: On resume le procede d'epuration CEA-PECHINEY, ainsi que diverses modalites de preparation des pates et on expose les resultats obtenus. 2) Proprietes physiques et mecaniques: On indique le resultat d'etudes sur: - la statistique des dimensions de produits a section carree. - celle des variations des coefficients de dilatation thermique et de la conductibilite electrique. - la densite des normales aux plans graphitiques et leur connexion avec la dilatation thermique. - la compression mecanique du graphite. - la solidite mecanique et la permeabilite aux gaz de pieces destinees a supporter des cartouches de combustible. 3) Tenue sous rayonnement: Modification sous rayonnement des graphites fran is irradies soit dans la pile G1, soit dans des piles experimentales, et guerison thermique de ces modifications. (auteur)

  1. Study of the machining of uranium carbide rods obtained by continuous casting under electronic bombardment; Etude de l'usinage de barreaux de carbure d'uranium obtenus par coulee continue sous bombardement electronique

    Energy Technology Data Exchange (ETDEWEB)

    Rousset, P.; Accary, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The authors consider the various methods of machining uranium mono-carbide and compare them critically in the case of their application to uranium carbide obtained by fusion under an electronic bombardment and continuous casting. This study leads them to propose two mechanical machining methods: cylindrical rectification and center-less rectification, preceded by a preliminary roughing out of a cylinder, the latter appearing more suitable. A study of the machining yields as a function of the diameter of the rough bars and of the diameter of the finished rods has shown that an optimum value of the rough bar diameter exists for each value of the finished rod diameter. It is found that the yield increases as the diameter itself increases, this yield rising from 45 per cent to around 70 per cent as the diameter of the rough bars increases from 25-26 mm to 37-38 mm. (authors) [French] Les auteurs envisagent les differentes methodes d'usinage du monocarbure d'uranium et se livrent a une etude critique de celles-ci, dans le cas de leur application a l'usinage de barreaux de carbure d'uranium obtenus par fusion sous bombardement electronique et coulee continue. Cette etude les conduit a proposer deux methodes d'usinage mecanique: la rectification cylindrique et la rectification 'centerless', precedee d'un ebauchage par carottage, la seconde paraissant la plus appropriee. L'etude des rendements d'usinage en fonction du diametre des barreaux bruts et du diametre des barreaux finis, a mis en evidence une valeur optimale du diametre des barreaux bruts pour chaque valeur du diametre des barreaux usines. Elle a montre que le rendement croit lorsque le diametre croit lui-meme, ce rendement passant d'environ 45 pour cent a environ 70 pour cent, lorsque le diametre des barreaux bruts passe de 25-26 mm a 37-38 mm.

  2. Comparison of fission probabilities with emission of long range particles under the action of slow and fast neutrons on various materials; Probabilites comparees de fission avec emission de particules de long parcours pour divers materiaux sous l'action des neutrons lents et rapides

    Energy Technology Data Exchange (ETDEWEB)

    Netter, F; Faraggi, H; Garin-Bonnet, A; Julien, J; Corge, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Turkiewicz, J [Institut de Recherches Nucleaire de Varsovie (Poland)

    1958-07-01

    The authors describe relative cross-section measurements of fission of the isotopes of uranium and plutonium (more particularly {sup 235}U, {sup 238}U, {sup 239}Pu), with emission of long range particles, under the action of neutrons of various energies: thermal neutrons, pile neutrons, neutrons produced with the Van de Graaff accelerator by reaction of protons on tritium. The measurements are carried out: 1) with the aid of photographic plates, by submitting to the action of the neutrons a layer of fissile material coupled with an Ilford nuclear emulsion of 200 microns; a tin sheet laying between the plate and the layer stops the {alpha} particles and the fission fragments. By an appropriate development the tracks of the long range particles can be distinguished in the emulsion, from the tracks of the recoil protons resulting of fission neutrons, or of the last primary neutrons. For neutrons of energy under 1 MeV, the compared frequency of the tracks of long range particles and of the recoils caused by the fission neutrons gives a measurement of the fission cross-section with emission of long range particles relative to the product of the fission cross-section by the mean number of neutrons emitted by fission. For neutrons of higher energy, one measures only the frequency of the tracks of long range particles, comparatively with the flux of primary neutrons. Some precautions are taken to eliminate the action of thermal neutrons in the measurements with fast neutrons. 2) with the aid of a system of ionization chamber and proportional counter, the rate of coincidence between the impulsions caused by the long range particles and the impulsions provided by one of the fission fragments is measured comparatively with the counting rate of fission fragme (author) [French] Les auteurs decrivent des mesures relatives a la section efficace de fission des isotopes de l'uranium et du plutonium (notamment {sup 235}U, {sup 238}U, {sup 239}Pu) avec emission de particules de long

  3. The Co{sup 60} Irradiation Facility and the Gamma Field at Riso; Appareil d'irradiation au cobalt-60 et champ sous irradiation gamma, a Riso; Ustanovka dlya obluchenij, rabotayushchaya na So60, i pole gamma-luchej v rizo; Instalacion de irradiacion con cobalto-60 y campo de irradiacion gamma en el centro de Riso

    Energy Technology Data Exchange (ETDEWEB)

    Brynjolfsson, A; Holm, N W [Danish Atomic Energy Commission, Establishment Riso (Denmark)

    1960-07-15

    The paper describes both the Co{sup 60} irradiation facility and the gamma field at the Agricultural Department of the Research Establishment, Riso. The Co{sup 60} irradiation facility contains 1,800 curies of Co{sup 60.} Details of the construction are given together with the safety precautions which have been included in the design. Dosimetry has been carried out by four different methods: 1. Ionisation chambers, 2. Calorimetry, 3. Fricke dosimeter, 4. Photographic films. A general outline is given of the gamma field, including details of source position. The dose rate is approximately 100 r./hr. at a distance of 1 m. An area of radius 15 m is used for the growing of plants under irradiation. A brief indication is given of the class of products which have been irradiated in the two facilities. (author) [French] Le memoire decrit l'appareil d'irradiation au cobalt-60 et le champ sous irradiation gamma du Departement de l'agriculture de l'Organisme de recherche de Riso. L'appareil d'irradiation au cobalt-60 contient une source de 1 800 curies. Des details sont donnes sur la construction ainsi que sur les dispositifs de protection compris dans le plan. Quatre methodes differentes ont ete utilisees pour la dosimetrie: 1. Chambres d'ionisation 2. Calorimetrie 3. Dosimetrie de Fricke 4. Pellicules photographique s On donne un apercu general du champ gamma, ainsi que des details sur la position de la source. L'intensite de dose est de 100 R/h environ a une distance de 1 m. Une zone d'un rayon de 15 m est utilisee pour la croissance des plantes soumises a l'irradiation. Des indications sommaires sont donnees sur la categorie des produits qui ont ete soumis a l'irradiation dans les deux installations. (author) [Spanish] Los autores describen la instalacion de irradiacion con cobalto-60 y el campo de irradiacion gamma del Departamento de Agronomia del Instituto de Investigaciones de Riso. El dispositivo de irradiacion consiste en una fuente de cobalto-60 de 1 800 curies

  4. Comportment of various magnesium alloys in carbon dioxide under pressure, between 400 and 600 deg; Compatibilite de divers alliages de magnesium avec le gaz carbonique sous pression entre 400 et 600 deg

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R; Baque, P; Chevilliard, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    'magnesium oxyde fritte'. Les echantillons, preleves dans des produits files, sont convenablement polis, deux etats de surface reproductibles etant realises a titre comparatif. Les essais ont ete effectues dans le gaz carbonique purifie, aux pressions de 25 et 60 atmospheres, et a des temperatures allant de 400 a 600, au moyen d'autoclaves speciaux en acier inoxydable, chauffes exterieurement. Leur duree est en general superieure a 1000 heures. Les equations des courbes d'augmentation de poids obtenues sont du type ({delta}p){sup n} = k.t (({delta}p en mg/cm{sup 2} et t en heures), l'exposant n etant voisin de 2, du moins jusqu'a 500 deg. C. En se referant a des resultats precedemment acquis quant a certains de ces materiaux exposes dans le gaz carbonique sous pression atmospherique et sous 15 atmospheres, il apparait que: 1) Pour un materiau determine: - a une pression donnee, l'oxydation augmente avec la temperature, - a une temperature donnee, l'oxydation augmente avec la pression, - dans les memes conditions de temperature et de pression, les resultats obtenus varient peu suivant les deux etats de surface etudies; 2) les alliages Mg-Zr presentent une resistance a l'oxydation amelioree par rapport au magnesium non allie; 3) l'alliage magnox est beaucoup moins avantageux dans le gaz carbonique que dans l'air, par rapport aux autres alliages. D'une facon generale, les courbes d'oxydation tendant vers un palier apres un certain temps d'exposition, la compatibilite de tous les alliages consideres avec le gaz carbonique apparait satisfaisante jusqu'a une temperature voisine de 500 deg. C, dans les conditions operatoires presentement definies; au dessus de 500 deg. C, des differences notables apparaissent entre les divers alliages, mais des phenomenes de sublimation interferent avec ceux d'oxydation, de sorte qu'un classement des divers materiaux ne peut etre base que sur leur resultante. (auteur)

  5. Two-pion production in photon-induced reactions

    Indian Academy of Sciences (India)

    photoproduction from nuclei is also used to investigate the in-medium modification of meson–meson interactions. ... the observation of an in-medium modification of the vector meson masses can pro- vide a unique .... similar behavior is found in (γ,π+π0) reactions, shown in the right panel of figure 3. Additionally, the peak in ...

  6. Le CERN sous le feu des syndicats

    CERN Multimedia

    Lalive d'Epinay, Marc

    2002-01-01

    In order to find the money needed to complete the LHC, CERN has made savings by outsourcing some jobs, especially maintenance and cleaning. This decision has been strongly criticised by French and Swiss trade unions who claim that employees are suffering (0.5 page)

  7. 18 octobre 2013 - Le Préfet de l’Ain L. Touvet signe le livre d'or avec le Directeur général du CERN R. Heuer et le Chef du Département Technologie F. Bordry. Photo de groupe, de gauche à droite: T. Kupisz, Secrétaire général de la sous préfecture de Gex; L. Miralles, Chef du Département Infrastructure et services généraux; F. Eder, Délégué aux Relations avec les Etats hôtes; S. Donnot, Sous-préfet de Gex; L. Touvet, Préfet de l'Ain; E. Sches, Sous-préfète de Nantua; E.Gröniger-Voss, Conseiller juridique du CERN; R. Heuer, Directeur général; F. Bordry, Chef du Département Technologie et P. Bloch, Chef du Département Physique.

    CERN Multimedia

    Anna Pantelia

    2013-01-01

    18 octobre 2013 - Le Préfet de l’Ain L. Touvet signe le livre d'or avec le Directeur général du CERN R. Heuer et le Chef du Département Technologie F. Bordry. Photo de groupe, de gauche à droite: T. Kupisz,\tSecrétaire général de la sous préfecture de Gex; L. Miralles, Chef du Département Infrastructure et services généraux; F. Eder, Délégué aux Relations avec les Etats hôtes; S. Donnot, Sous-préfet de Gex; L. Touvet, Préfet de l'Ain; E. Sches, Sous-préfète de Nantua; E.Gröniger-Voss, Conseiller juridique du CERN; R. Heuer, Directeur général; F. Bordry, Chef du Département Technologie et P. Bloch, Chef du Département Physique.

  8. Physical Properties of P.V.C. Attenuated Network Copolymers Produced by Ionizing Radiation; Proprietes physiques des copolymeres obtenus sous l'action de rayonnements ionisants et dont le reseau est attenue par l'effet du chlorure de polyvinyle; Fizicheskie svojstva polivinilkhloridnykh obednennykh tsepej sopolimerov, poluchennykh v rezul'tate vozdejstviya ioniziruyushchej radiatsii; Propiedades fisicas de los copolimeros de redes atenuadas por cloruro de polivinilo obtenidos por irradiacion

    Energy Technology Data Exchange (ETDEWEB)

    Pinner, S H [Tube Investments Research Laboratories, Hinxton Hall, Cambridge (United Kingdom)

    1960-07-15

    The cross-linking of polyvinyl chloride with ionizing radiation poses special problems. Due to rather unfavourable cross-linking and dislinking parameters for this polymer, the radiation doses necessary for high cross-link densities are uneconomicall y large and discolouration and dehydrohalogenatio n are simultaneously produced. These difficulties have been overcome by the incorporation into the P. V. C., prior to irradiation, of diallyl and triallyl esters. Heavily cross-linked products are thereby obtained with relatively low doses of ionizing radiation. Examination of the physical properties of the products suggests that these are not simply graft copolymers, which term normally implies the presence of long branch chains, but are polymer attenuated allyl networks. In these materials, the desirable properties of the parent polymer and of the allyl network are combined. The tensile strength, modulus and elongation of the attenuated network copolymers are presented and discussed as a function of temperature and of the concentration and functionality of the allyl ester. Reference is also made to the swelling and chemical resistance of the products. (author) [French] La reticulation du chlorure de polyvinyle sous l'action des rayonnements ionisants pose des problemes particuliers. Les parametres de reticulation et de degradation etant plutot defavorables pour ce polymere, les doses d'irradiation necessaires a l'obtention de fortes densites de pontage sont trop elevees pour donner des resultats economiquement interessants; elles provoquent simultanement la decoloration et la deshalogenhydratation. Il a ete possible de surmonter ces difficultes par introduction d'esters diallyliques et triallyliques dans le chlorure de polyvinyle, avant irradiation. Ce procede permet d'obtenir au moyen de doses d'irradiation relativement faibles des produits fortement reticules. L'etude des proprietes physiques de ces produits montre qu'il s'agit non pas de simples copolymeres greffes

  9. Production of Strontium-90 Thermal Power Sources; Fabrication de sources d'energie thermique au strontium-90; Proizvodstvo istochnikov ''teplovoj ehnergii iz Sr''9''0; Preparacion de fuentes de energia termica con estroncio-90

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, J. S.; Bloom, J. L.; Schneider, A. [Martin Company, Nuclear Division, Baltimore 3, MD (United States)

    1963-11-15

    One of the most attractive fields for utilization of large quantities of waste fission products is the field of direct-conversion power supplies for remote locations. Strontium-90 is being given the greatest exploitation because of its availability, nuclear properties, and the relative ease with which it can be fabricated into compact heat sources. Strontium-90 fuelled generators are being used to power automatic weather stations and navigational aids, and consideration is being given to the use of strontium-90 as a power source for space vehicles. Evaluation of several potentially useful strontium compounds led to the selection of the titanate as exhibiting overall properties most desirable for this purpose. Strontium-90, separated from crude fission product streams and purified to the requisite degree by the USAEC's Hanford Works, is shipped in the form of the carbonate to a hot cell facility operated by the Martin Company, where it is converted to titanate pellets. This process is an adaption to remote operation of conventional chemical and ceramic techniques. The pellets are encapsulated in Hastelloy C containers for use in thermoelectric power supplies. Unusual operational problems are encountered because the large quantities of strontium-90 handled (potentially millions of curies per year) represent formidable radiation and contamination hazards. Details of the facility, equipment, process, and safety criteria are given. The operational experience gained during the recent processing of the first 250 000 curies of strontium-90 into fuel for a SNAP-7 generator is described. Encapsulation, calorimetry, decontamination, and waste disposal procedures are also outlined. (author) [French] L'une des utilisations les plus interessantes des produits de fission en grande quantite consiste a les employer comme sources d'energie par combustion directe pour des installations geographiquement isolees. C'est le strontium-90 qui est l e plus utilise parce qu'on en dispose en

  10. Ionospheric effects during severe space weather events seen in ionospheric service data products

    Science.gov (United States)

    Jakowski, Norbert; Danielides, Michael; Mayer, Christoph; Borries, Claudia

    Space weather effects are closely related to complex perturbation processes in the magnetosphere-ionosphere-thermosphere systems, initiated by enhanced solar energy input. To understand and model complex space weather processes, different views on the same subject are helpful. One of the ionosphere key parameters is the Total Electron Content (TEC) which provides a first or-der approximation of the ionospheric range error in Global Navigation Satellite System (GNSS) applications. Additionally, horizontal gradients and time rate of change of TEC are important for estimating the perturbation degree of the ionosphere. TEC maps can effectively be gener-ated using ground based GNSS measurements from global receiver networks. Whereas ground based GNSS measurements provide good horizontal resolution, space based radio occultation measurements can complete the view by providing information on the vertical plasma density distribution. The combination of ground based TEC and vertical sounding measurements pro-vide essential information on the shape of the vertical electron density profile by computing the equivalent slab thickness at the ionosonde station site. Since radio beacon measurements at 150/400 MHz are well suited to trace the horizontal structure of Travelling Ionospheric Dis-turbances (TIDs), these data products essentially complete GNSS based TEC mapping results. Radio scintillation data products, characterising small scale irregularities in the ionosphere, are useful to estimate the continuity and availability of transionospheric radio signals. The different data products are addressed while discussing severe space weather events in the ionosphere e.g. events in October/November 2003. The complementary view of different near real time service data products is helpful to better understand the complex dynamics of ionospheric perturbation processes and to forecast the development of parameters customers are interested in.

  11. Determination of bore efficiency loss employed as powder in boral fabrication, proportionately to the dimension of grain; Determination de la reduction d'efficacite du bore ou d'un autre absorbeur employe sous forme de poudre dissemine dans un produit non absorbant, en fonction de la grosseur des grains

    Energy Technology Data Exchange (ETDEWEB)

    Laforge, P; Millot, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    Authors' mind was attracted by the importance of bore granulometry when employed as powder in boral fabrication. The calculation, object of this report, permits to give values for bore efficiency loss, proportionately to the dimension of spherical or ellipsoidal supposed grains. Grains to be employed should exceptionally only exceed 20 {mu} for a correspondent efficiency loss of 8 per cent about. (author) [French] L'attention des auteurs a ete attiree sur l'importance de la granulometrie du bore employe sous forme de poudre dans la fabrication du boral. Le calcul qui fait l'objet de ce rapport permet de chiffrer la perte d'efficacite du bore en fonction de la dimension des grains supposes spheriques ou ellipsoidaux. Les grains a employer ne devraient qu'exceptionnellement etre superieurs a 20 microns, ce qui correspond a une perte d'efficacite d'environ 8 pour cent. (auteur)

  12. Mike Davis, Génocides tropicaux. Catastrophes naturelles et famines coloniales (1870-1900. Aux origines du sous-développement, Paris, La Découverte, 2003, 479 p., trad. Late Victorian Holocausts, El Niño Famines and the Making of the Third World, 2001.

    Directory of Open Access Journals (Sweden)

    Cyrille Ferraton

    2005-04-01

    Full Text Available C’est à une histoire en grande partie négligée et méconnue qu’est consacré l’ouvrage de Mike Davis Génocides tropicaux publié en 2001 sous le titre Late Victorian Holocausts, El Niño Famines and the Making of the Third World. L’Inde, la Chine, le Brésil, l’Afrique du Nord, l’Afrique australe, les Philippines, en fait, un grand nombre de pays qu’Alfred Sauvy désignera en 1952 par pays du « tiers-monde », connurent à la fin du XIXe siècle et au tout début du XXe siècle trois périodes climatique...

  13. Construction and Operation of a Commercial Gamma-Ray Package-Sterilizing Plant; Construction et fonctionnement d'une installation industrielle pour la sterilisation d'articles sous emballage par les rayons gamma; Razrabotka i ehkspluatatsiya sbornoj ustanovki gamma-izlucheniya promyshlennogo tipa dlya sterilizatsii meditsinskikh materialov; Construccion y funcionamiento de una instalacion industrial para la esterilizacion gamma de articulos medicos empaquetados

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, C. G. [Johnson' s Ethical Plastics Ltd., Slough (United Kingdom)

    1963-11-15

    The purpose of the paper is to describe the Co{sup 60} sterilizing plant now being operated commercially by Johnson's Ethical Plastics Limited, at Slough, England. This is a continuous process plant with a source of 72000 c and completely automatic operation. Based on experience gained by U.K.A.E.A. in their Package Irradiation Plant at Wantage, the present plant was designed specifically for sterilization of disposable plastic syringes and other medical products of similar bulk density. The plant has been in operation since November 1962. A description is given of the main features of its construction, including personnel safety devices, and method of loading the source rods. Operating experience is described including dosimetry, integration of the plant into a commercial undertaking as a production process, and bacteriological results. A short discussion on the economics of sterilizing by gamma radiation is given and an assessment of possible future applications of a plant of this type. (author) [French] Le memoire est consacre a la description de l'installation de sterilisation au cobalt-60, actuellement exploitee industriellement par la Johnson Ethical Plastics Ltd., a Slough (Angleterre). Cette installation, equipee d'une source de 72 000 c, fonctionne en continu et toutes les operations y sont automatiques. Fondee sur l'experience acquise par l'Autorite de l'energie atomique du Royaume-Uni dans son installation d'irradiation d'articles sous emballage, de Wantage, l'installation decrite est specialement destinee a la sterilisation de seringues en matieres plastiques et d'autres instruments medicaux non recuperables de densite apparente analogue. L'installation est en service depuis novembre 1962. Le memoire decrit ses principales caracteristiques, y compris les appareils de protection du personnel et les dispositifs de chargement des barreaux utilises comme sources. L'auteur fournit des donnees d'ordre pratique, notamment sur la dosimetrie, l'integration de l

  14. Sensory quality of broiler breast meat influenced by low atmospheric pressure stunning, deboning time and cooking methods.

    Science.gov (United States)

    Schilling, M W; Radhakrishnan, V; Vizzier-Thaxton, Y; Christensen, K; Williams, J B; Joseph, P

    2015-06-01

    Stunning method (low atmospheric pressure stunning, LAPS and electrical stunning, ES), deboning time (0.75 h and 4 h), and cooking method (baking, frying, and sous vide) were evaluated for their impact on the descriptive sensory characteristics and consumer acceptability of breast meat (n=576, 144 birds per stunning × deboning time combination). Sensory evaluation was conducted by trained descriptive (n=8) and consumer (n=185) panels. On average, no differences (P>0.05) existed in the sensory acceptability of fried and sous vide cooked broiler breast treatment combinations. However, for oven-baking, the LAPS treatment that was deboned at 4 h was more acceptable (Pbaked chicken breast was highly acceptable preferred (Pcharacteristics when baked. © 2015 Poultry Science Association Inc.

  15. Low-temperature cooking of beef

    DEFF Research Database (Denmark)

    Mortensen, Louise Mørch

    . The third group showed a different behaviour; in this group time and temperature worked in different directions. Thus, the results showed three dominant behaviours in sensory properties. Two sensory properties, tenderness and juiciness, are very important in cooked meat according to both consumers and chefs......Molecular gastronomy is a new scientific field concerned with domestic and restaurant cooking, perception of food, and other factors relevant for cooking and meals. Most available gastronomic knowledge is based on experience and handed-down procedures from cookbooks and recipes. This inductive way......-time sous-vide-cooking of meat. This method is increasingly used, especially in high-end restaurants, where it receives much praise from leading chefs worldwide. Sous-vide-cooking uses vacuum-packaging of the meat and preparation in thermostated water-baths at temperatures between 54°C and 65°C for periods...

  16. Effect of high energy electrons on the skin and on the underlying tissues of the rabbit. A clinical and histological study; Effets des electrons de haute energie sur la peau et les tissus sous-jacents du lapin. Etude clinique et histologique

    Energy Technology Data Exchange (ETDEWEB)

    Legeay, G; Vialettes, H; Adnet, J J; Court, L; Masse, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-07-01

    The authors consider in this report the effects of high-energy electrons on rabbit teguments and on the underlying tissues after a single high dose irradiation. After briefly considering the mechanism of interaction between the electrons and matter as a function of their energy, the authors describe the dosimetry carried out, as a function of the irradiation device. The animal received surface doses of 5700 to 22100 rads in the thigh; the electron energy varied from 21 to 30 MeV. A clinical study was carried out over a period of nine months with a view to following the evolution of the damage and the functional degradation of the underlying tissues. A histological study of the induced damage was made after a second irradiation using 30 MeV electrons to produce doses of 16400 rads. Interesting observations were made concerning the damage caused to muscular and nerve tissues. (authors) [French] Les auteurs etudient, dans ce rapport, les effets des electrons de haute energie sur les teguments du lapin et les tissus sous-jacents apres une irradiation unique a dose elevee. Apres un rappel du mecanisme de l'interaction des electrons avec la matiere en fonction de leur energie, la dosimetrie realisee est exposee en fonction du dispositif d'irradiation. Les animaux ont recu, au niveau de la cuisse, des doses en surface de 5700 a 22100 rads; les energies des electrons vont de 21 a 30 MeV. Une etude clinique des lesions, observees pendant 9 mois, decrit leur evolution ainsi que les alterations fonctionnelles des tissus sous-jacents. Une etude histologique des lesions induites a ete realisee au cours d'une seconde experience pour des doses de 16400 rads avec des electrons de 30 MeV. D'interessantes observations ont ete faites concernant les lesions des tissus musculaires et nerveux. (auteurs)

  17. Minimal processing - preservation methods of the future: an overview

    International Nuclear Information System (INIS)

    Ohlsson, T.

    1994-01-01

    Minimal-processing technologies are modern techniques that provide sufficient shelf life to foods to allow their distribution, while also meeting the demands of the consumers for convenience and fresh-like quality. Minimal-processing technologies can be applied at various stages of the food distribution chain, in storage, in processing and/or in packaging. Examples of methods will be reviewed, including modified-atmosphere packaging, high-pressure treatment, sous-vide cooking and active packaging

  18. Étude expérimentale du comportement cyclique d'un acier du type 316 L sous chargement multiaxial complexe en traction-torsion-pressions interne et externe

    Science.gov (United States)

    Bocher, L.; Delobelle, P.

    1997-09-01

    are very rich in informations and lead to classify the different types of loading, with two or three cyclic components, with respect to the observed supplementary hardening. This classification was established as follows: i) The in-phase tests with two or three components (δ = \\varphi = 0^circ); no supplementary hardening is observed. ii) The tension-pressure tests such as r_1 = 1, \\varphi = 90^circ and r_1 = - 1, \\varphi = 60^circ, the hardening is slightly inferior to that of tension-torsion tests. iii) The tension-torsion tests such as r_2 = 1 and δ = 90^circ, where a substantial additionnal hardening takes place. iv) The tension-torsion-pressure tests where the three components are strongly shifted, namely: r_1 = r_2 = 1, δ = 90^circ and \\varphi = 60^circ, and r_2 = 1, r_1 = -1, δ = 41.4^circ and \\varphi = 82.8^circ. The hardening is slightly superior to the one recorded in tension-torsion. A more thorough study is in preparation which considers all the possible combinations in tension-torsion-pressures, and will be performed on the same material. The early results tend to validate the observations presented in this article. Cette étude réside dans la détermination expérimentale du comportement à la température ambiante de l'acier inoxydable 316 L sous chargement cyclique non proportionnel en traction-torsion-pressions interne et externe. Les deux ou trois déformations sinusoïdales appliquées sont soit en phase, soit hors-phase et l'on étudie l'amplitude du durcissement supplémentaire en fonction du degré de multiaxialité. On présente quelques boucles stabilisées typiques. Par rapport au durcissement supplémentaire maximal, les différents essais peuvent être classés comme suit: essais en phase (pas de durcissement supplémentaire), essais de traction-pressions hors-phase, essais de traction-torsion hors phase et essais de traction-torsion-pressions avec déphasages conséquents.

  19. L’évolution de l’affirmative action aux États-Unis sous la présidence de George W. Bush Evolution of Affirmative Action in the United States during the Presidency of George W. Bush

    Directory of Open Access Journals (Sweden)

    Marie-Christine Pauwels

    2010-03-01

    Full Text Available L’offensive contre l’affirmative action engagée depuis les années 1980 s’est accrue pendant les deux mandats de la présidence Bush, et l’opinion publique s’est radicalisée, percevant désormais de plus en plus fréquemment ces programmes comme une série d’avantages indûment octroyés à un certain nombre de « privilégiés ». Tout programme d’affirmative action doit désormais être étayé par des disparity studies démontrant la réalité de la discrimination, et seules des mesures très ciblées (narrowly tailored sont autorisées pour y remédier. La charge de la preuve a été en quelque sorte inversée. Mais contrairement aux idées reçues, l’affirmative action n’est pas sur le point de disparaître aux États-Unis et malgré son hostilité de principe, le gouvernement Bush n’a pris aucune mesure concrète pour démanteler ces programmes. L’affirmative action connaît aujourd’hui plusieurs transformations majeures, l’évolution la plus marquante étant l’effacement du critère ethno-racial au profit de critères plus neutres et moins idéologiquement polarisants, essentiellement d’ordre géographique et territorial. Dans l’enseignement supérieur par exemple, des procédures d’admission codées ont vu le jour pour favoriser l’accès des minorités ethniques sous-représentées aux campus d’élite, et diverses stratégies de contournement ont été mises en place dans l’adjudication des marchés publics. Ces transformations sont également intéressantes à analyser d’un point de vue transnational, puisque l’on observe une convergence croissante avec le modèle français de discrimination positive, lui aussi fondé sur le camouflage et l’euphémisation de l’identité ethno-raciale et sur une logique de territoire.This article examines the fate of affirmative action in the United States during the eight years of the Bush administration. After a brief reminder of the major landmarks

  20. Caractérisation physico-chimique de boues d’unité de production d’eau potable Physico-chemical characterization of sludge from a unit water drinking production

    Directory of Open Access Journals (Sweden)

    Mostahsine S.

    2012-09-01

    Full Text Available La composition chimique des boues hydroxydes, sous-produit de la potabilisation de l’eau est constituée majoritairement d’hydroxydes d’aluminium et de silice, les hydroxydes de Fer, de calcium, de potassium et de magnésium dont le taux peut varier sensiblement selon les périodes de prélèvement des eaux brutes et peut conférer à la boue des propriétés physico-chimiques intéressantes. La composition minéralogique des boues peut également comporter un solidifiant tel que les silicates de calcium. L’observation au MEB de ces boues hydroxydes montre une phase amorphe sous forme de flocons dont la géométrie est mal définie et emprisonnant de petits cristaux de quartz et de muscovite. Ces observations sont en corrélation avec les principales phases minérales mises en évidence dans les essais de diffraction des rayons X. L’étude du comportement thermique des boues, notamment celui de la déshydroxylation et les transformations de phases sont situées dans un intervalle de température compris entre 300 et 800°C. Ces transformations thermiques sont caractérisées par plusieurs méthodes analytiques (DSC, DRX et infrarouge. Les nouvelles phases cristallisées sont sous différentes formes de solutions solides du type (Ca, Al, Si, Fe, K, Mg. Chemical composition of the Hydroxides sludge, by-product of treatment of drinking water, are composed mainly of silica and the hydroxides of aluminium, the ratio of the hydroxides of iron, calcium, potassium and magnesium fluctuate appreciably according to the periods of taking away raw waters, and could confer to the sludge interesting physico-chemical properties. The mineralogical composition of the sludge may also contain a solidifying component such as calcium silicate. The MEB observation shows an amorphous phase in the form of flakes whose geometry is badly defined and imprisoning small muscovite and quartz crystals. These observations are in correlation with principal mineral

  1. Tobacco Products

    Science.gov (United States)

    ... Exposure is High in Multiunit Housing Smokeless Products Electronic Cigarettes Youth Tobacco Prevention Tobacco Products Tobacco Ingredient ... Tweet Share Compartir Find Fact Sheets on Products (Cigars, Bidis and Betel Quid with Tobacco (Gutka) and ...

  2. Facteurs socio-économiques affectant l'utilisation des sous-produits agro-industriels pour l'embouche bovine à contre-saison dans l'Adamaoua, Cameroun

    Directory of Open Access Journals (Sweden)

    Deffo V.

    2009-01-01

    Full Text Available Socio-economic factors affecting the use of agro-industrial by-products for cattle fattening in the dry season in Adamawa, Cameroon. Cattle production is the major economic activity in the Adamawa. Feed deficiency that causes about 129 to 187 g weight loss per day is an important constraint during the dry season. A possible alternative to overcome this constraint is the use of agro-industrial by-products. However, the adoption and effective use of these potentials are still to be encouraged. This study, which objective was to find out the socio-economic factors that may affect the usage of these resources, permitted to show, through interviews and surveys, that more than 8,200 t of agro-industrial by-products (maize and wheat bran, soybean seed and maize seed cake useable for cattle feeding were produced annually in Adamawa and that only 16 % of this production were used by livestock farmers. Among the factors affecting the effective use of these by-products, prices were the most determinant. The herds size and the number of sedentary animals had also shown a significant positive effect. On the other hand, livestock farming experience and the farmer’s age had instead shown a strong negative correlation with the use of by-products; same was the level of farmer’s education which showed positive correlation only with respect to cotton seed cake use. The distance from the livestock farming sites to the by-products production/distribution centre and/or difficult access to the sites had strong positive correlations with the by-products’ prices. The problem of supplies as a result of long distance or of difficult access to cattle production sites, the high and unstable prices of agro-industrial by-products and poor awareness of the different types of by-products produced in the Adamawa, were noted as major constraints for their use as cattle feed. Based on the above results, an effective extension system and well organized farmers groupings could

  3. La spirale dell’azzardo: una subcultura del gioco che “evapora” le relazioni / La spirale du jeu de hasard : une sous-culture qui empêche toute relation / The gambling: a subculture of game that “burns” the relationships

    Directory of Open Access Journals (Sweden)

    Molin Valentina

    2011-07-01

    neutralizzazione dei possibili rinforzi negativi che provengono invece dai “non-giocatori”.Dans cet article, l’auteur analyse les caractéristiques de ce qu’elle a appelé « sous-culture des jeux de hasard », décelable dans certains milieux de loisirs et dans les sous-groupes de joueurs particulièrement « acharnés ». Parmi ces formes de sous-culture, l’article va identifier les règles et les sanctions, les valeurs, les comportements durables, la caractérisation des relations et des interactions, en concluant que ce qui est construit dans l'espace du jeu est un univers séparé, une «réalité extérieure» dans laquelle des nouvelles règles sont écrites et où les valeurs changent par rapport au «monde extérieur» . Il a également été possible de conclure que l'adhésion à l' «univers du jeu» - l'internalisation de ses normes, le partage de ses valeurs, le développement des relations en son sein - est un facteur de maintenance de la conduite du jeu, car cette adhésion permet d'envisager comme «normal» son propre comportement grâce à des réactions positives provenant des compagnons de jeu et à la neutralisation d’éventuelles réactions négatives provenant des «non joueurs».

  4. Study of atmospheric tritium transfers in lettuce: kinetic study, equilibrium and organic incorporation during a continuous atmospheric exposure; Etude des transferts du tritium atmospherique chez la laitue: Etude cinetique, etat d'equilibre et integration du tritum sous forme organique lors d'une exposition atmospherique continue

    Energy Technology Data Exchange (ETDEWEB)

    Boyer, C.

    2009-11-30

    This thesis has explored the mechanisms of tritium 'absorption and incorporation in a human-consumed plant, lettuce (Lactuca sativa L.), due to atmospheric exposure. Foliar uptake appears to play a key role in absorption of tritium as tissue free water tritium. Whatever the development stage and the light conditions, the specific activity in tissue free water reaches that of water vapour in air in several hours. The specific activity ratio is then about 0, 4. The time to reach equilibrium in soil is over 24 hours in most cases: the specific activity ratio ranges then 0, 01 to 0, 26. Incorporation rate of tissue free water tritium as organically-bound tritium has been estimated to 0, 13 to 0, 16 % h-l in average over the growing period of the plant, but marked variations are observed during growth. In particular, a significant increase appeared at the exponential growth stage. Deposition and diffusion of tritium in soil lead to significant OBT activities in soil. Results globally indicate equilibrium between the different environmental compartments (air, soil, plant). However, some experiments have revealed high OBT concentrations regarding atmospheric level exposure and ask for a possible phenomenon of local tritium accumulation in OBT for particular conditions of exposure. (author) [French] Ce travail de these a concerne l'etude des phenomenes d'absorption et d'incorporation sous forme organique du tritium dans un vegetal de consommation courante, la laitue (Lactuca sativa L.), en reponse a une exposition atmospherique. Il apparait que la voie foliaire joue un role primordial dans l'absorption du tritium au sein de l'eau tissulaire des plants. Quels que soient le stade de developpement des plants et les conditions d'eclairement, le temps necessaire pour atteindre l'equilibre des concentrations dans l'eau libre et dans la vapeur d'eau de l'air est de plusieurs heures; le rapport des concentrations est alors de

  5. « Le nez dans le micro ». Répercussions du travail sous commande vocale dans les entrepôts de la grande distribution alimentaire “Up front and close”. The impact of voice guidance systems in large food distribution warehouses “Estar pegado al micrófono”. Repercusiones del trabajo de activación por voz en los almacenes de la distribución alimentaria masiva

    Directory of Open Access Journals (Sweden)

    David Gaborieau

    2012-12-01

    Full Text Available Dans les entrepôts de la grande distribution alimentaire, l’introduction d’un nouvel outil de travail, le guidage par commande vocale, a considérablement modifié le travail des préparateurs de commande. Auparavant caractérisée par l’absence d’enchaînement et la possibilité de prendre de l’avance, l’activité de préparation a évolué vers une temporalité restrictive comparable à celle d’un ouvrier sur chaîne. Sous guidage vocal, « le nez dans le micro », le savoir-faire des préparateurs est réduit à un engagement physique. L’usage du corps constitue alors une ressource en tant mode d’appropriation du sens au travail, mais également un rempart lorsque des pathologies font apparaître les limites de l’intensification.Order picker operations in large food distribution warehouses have been considerably changed by a introduction of a new tool – voice guidance systems. Where the work used to be characterized by a lack of fixed sequencing and the impossibility for operatives of getting ahead of schedule, preparation activities have evolved towards more restrictive temporalities comparable to production line workers’ experience. With “up front and close” vocal guidance, order pickers’ skill is limited to their physical engagement, now considered a resource (i.e. a mode for appropriating the meaning of work but also a bulwark against the pathologies that arise as the general intensification drive reaches its limits.En los almacenes de la distribución alimentaria a gran escala, la introducción de una nueva herramienta de trabajo, el guiado activado por voz, ha transformado considerablemente el trabajo de los preparadores de pedidos. La actividad de preparación, antes caracterizada por la ausencia de secuenciación y por la posibilidad que el trabajador tenía de ganar tiempo, ha evolucionado hacia una temporalidad restrictiva comparable a la de un obrero en una cadena. Con el guiado activado por voz, al

  6. Sustainable development - billions of watts under the seas - Marine current turbines play simple - Technological waves; Developpement durable - Des milliards de watts sous les mers - Les hydroliennes jouent la simplicite - Vagues technologiques

    Energy Technology Data Exchange (ETDEWEB)

    Lucas, Th.

    2011-10-27

    The author evokes the opportunities of power generation by the development of sea current or tidal stream turbines. Some developments are already tested by Norwegian, French, Danish, British and American companies. Some specific turbines are briefly presented. In order to reduce the cost of the electricity production from sea currents, manufacturers are using simple and robust technologies, and exploit the experience gained on wind turbines. Some designs and prototypes are evoked for the production of electricity by sea waves (Pelamis and Oyster projects). Principles, strengths and production projects are briefly indicated. The challenge of maintenance in sea environment is outlined for these projects

  7. Les représentations mentales du mode de production des produits alimentaires (France Mental representations related to food production modes

    Directory of Open Access Journals (Sweden)

    Marielle Salvador-Perignon

    2011-09-01

    Full Text Available Cette recherche se propose d’aborder le mode de production du produit alimentaire sous l’angle des représentations mentales en France. Dans le langage commun on entend souvent les termes « industriel » ou « artisanal » pour caractériser les produits alimentaires, sans que l’on sache vraiment ce que ces termes désignent. Le contexte actuel d’incertitude et de méconnaissance des systèmes de production chez les consommateurs nous permet d’émettre l’hypothèse de l’existence d’une représentation mentale du mode de production. Nous tentons de vérifier cette hypothèse par une étude qualitative à l’issue de laquelle les premières caractéristiques du produit alimentaire industriel ou artisanal sont précisées.This research approaches the food product through the mental representations concerning manufacturing processes. In the common language we often find such terms as “industrial” or “traditional” to qualify production methods and characterize food products, but do we know what these terms really mean? Uncertainties and misunderstandings regarding food production enable us to highlight the existence of consumers’ mental representations regarding manufacturing processes. Such representations have been studied by means of a qualitative study which enabled us to define the primary characteristics of industrial or traditional food products.

  8. Production of Modularised Product Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter

    2004-01-01

    but a solution. Modularisation is one tool used in designing the products. Designing and controlling a production system making customized products in an economical way is not an easy task. In order to fulfil the Lean and Agile manufacturing philosophies the production is often carried out in networks. Here...

  9. Radioactive study of Mo{sup 93} and Mo{sup 95} levels and research of subshell effects for the shell 2d 5/2; Etude, par radioactivite des niveaux de {sup 93}Mo et de {sup 95}Mo et essai de mise en evidence de la sous-couche 2d{sub 5/2}

    Energy Technology Data Exchange (ETDEWEB)

    Levi Lesueur, Ch [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-03-15

    We studied the decay schemes of Tc{sup 93} et Tc{sup 95} to determine the spins of Mo{sup 93} and M{sup 95} levels, and especially the position of the single-particle level 1g 7/2. We found a large spacing between the neutron shells 2d 5/2 and 1g 7/2 like that observed first in Mo{sup 97}. As the subshell 2d 5/2 is so far from its neighbours, we thought that subshell effects could perhaps be discovered in the systematics of separation energies and beta-decay energies. We found such effects. (author) [French] Par l'etude des schemas de desintegration de {sup 93}Tc et {sup 95}Tc, nous avons essaye de determiner les spins des niveaux de {sup 93}Mo et {sup 95}Mo et en particulier la position du niveau de particule 1g 7/2. Nous avons ainsi confirme l'ecart important entre les couches de neutrons 2d 5/2 et 1g 7/2 deja constate a propos de {sup 97}Mo. Nous avons pense que la sous-couche 2d 5/2 ainsi isolee des couches voisines pouvait, peut etre, etre mise en evidence par l'etude des systematiques d'energies de separation et d'energies de desintegration beta. Nous avons verifie qu'il en etait bien ainsi. (auteur)

  10. Product Customization

    DEFF Research Database (Denmark)

    Hvam, Lars; Mortensen, Niels Henrik; Riis, Jesper

    For the majority of industrial companies, customizing products and services is among the most critical means to deliver true customer value and achieve superior competitive advantage. The challenge is not to customize products and services in itself – but to do it in a profitable way...... from more than 40 product configuration projects in companies providing customer tailored products and services........ The implementation of a product configuration system is among the most powerful ways of achieving this in practice, offering a reduction of the lead time for products and quotations, faster and more qualified responses to customer inquiries, fewer transfers of responsibility and fewer specification mistakes...

  11. Maitrise de la fermentation alcoolique sous stress éthanolique, thermique et osmotique de la souche Saccharomyces cerevisiae YS-DN1 en vue de la préparation du vinaigre de fruits

    Directory of Open Access Journals (Sweden)

    Majid MOUNIR

    2016-07-01

    Full Text Available The purpose of the present study is to isolate, identify and characterize new yeast species of industrial interest. A total of 54 strains were isolated and identified from agricultural raw products and from by-products of the food industry. Among these, four strains were selected, purified and tested for their ability to perform efficient fermentation on Bouslikhène date juice. After the sequencing of the 18S gene of the ribosomal DNA, the two strains YS-DN1 and YS-M isolated respectively from dates and molasses have been identified belonging to Saccharomyces cerevisiae species. In addition, the other two strains, YS-OMP and YS-G isolated from olives and grapes belonged to Kluyveromyces marxianus (78% homology and Candida utilis (89% homology species, respectively. In addition, YS-DN1 strain showed the highest performance in terms of ethanol production in comparison with two other industrial reference strains. YS-DN1 strain was the only one that was able to grow at a temperature ranged from 35 to 40°C in the presence of a high alcoholic concentration and aggressive osmotic pressure condition. Finally, production of the cellular biomass of YS-DN1 strain was improved by optimization of temperature, Brix and pH fixed respectively at 29.75°C, 15.7% and 4.15. These values allowed to obtain a maximum of cells of about 8.4x10 8 UFC/ml. It was concluded that this strain is well suited for fruit vinegar production at a large-scale.

  12. Workforce productivity.

    Science.gov (United States)

    Williams, Ruth

    2012-10-26

    Managers who are responsible for delivering the workforce productivity element of the Quality, Innovation, Productivity and Prevention (QIPP) programme can network and share best practice through a dedicated NHS Employers webpage.

  13. Primary productivity

    Digital Repository Service at National Institute of Oceanography (India)

    Verlecar, X.N.; Parulekar, A.H.

    Photosynthetic production in the oceans in relation to light, nutrients and mixing processes is discussed. Primary productivity in the estuarine region is reported to be high in comparison to coastal and oceanic waters. Upwelling phenomenon...

  14. "Hun vides ikke at have andet erhverv end erhverv ved utugt"

    DEFF Research Database (Denmark)

    Sørensen, Christina Louise

    2015-01-01

    The purpose of this thesis is to show how the Morality Police in Copenhagen regulated prostitution and sexual promiscuity from 1906-1940. The final decades of the nineteenth century saw intense discussion on how to cope with the danger of the widespread venereal diseases. Prostitutes were seen...... as disease carriers and at the same time, prostitution was considered immoral and scandalous. The solution to both the problem of the dissemination of sexually transmitted diseases and the grounds of public morality and decency were resolved through regulation of the sale of sex. This implied regular medical...... examinations and strict rules laid down for the behavior of the prostitutes. However in 1906 a new legislation concerning public indecency and venereal diseases, Lov af 30te Marts 1906 om Modarbejdelse af offentlig Usædelighed og venerisk Smitte, was passed by the Danish Parliament. The Law of 1906 was adopted...

  15. Metallic joints for very high vacuum; Joints metalliques pour ultra-vide

    Energy Technology Data Exchange (ETDEWEB)

    Paigne, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1961-07-01

    After defining three main types of joint; three types of distribution of the tightening force in the clamps are demonstrated; the distribution of stresses, distortion and displacements in these clamps is then calculated by means of the theory of elasticity. This is followed by experimental results on a particular means of tightening (i.e. screw-clamps). From a brief discussion on the behaviour of the clamps it is possible finally to define other types of joint deriving from the main types originally foreseen. (author) [French] Apres avoir defini trois principaux types de joints, on met en evidence trois types de distribution des forces de serrage des brides; puis on calcule a l'aide de la theorie de l'elasticite la distribution des contraintes, deformations et deplacements dans ces brides. On donne ensuite des resultats experimentaux sur un mode de serrage particulier (cas des serres-joints). Une discussion sommaire sur le comportement des brides permet de definir finalement d'autres types de joints derivant des types principaux envisages initialement. (auteur)

  16. Hvad praktikere bør vide om...CAPM-modellen

    DEFF Research Database (Denmark)

    Nielsen, Peder Harbjerg

    1997-01-01

    CAPM-modellen er en hovedhjørnesten i den moderne porteføljeteori. CAPM står for Capital Asset Pricing Modellen, men det navn lover mere end et holder. Der er kun tale om en porteføljebaseret differentiering af risikopræmierne.......CAPM-modellen er en hovedhjørnesten i den moderne porteføljeteori. CAPM står for Capital Asset Pricing Modellen, men det navn lover mere end et holder. Der er kun tale om en porteføljebaseret differentiering af risikopræmierne....

  17. Minimally Processed Functional Foods: Technological and Operational Pathways.

    Science.gov (United States)

    Rodgers, Svetlana

    2016-10-01

    This paper offers a concise review of technical and operational concepts underpinning commercialization of minimally processed functional foods (FFs), foods with fresh-like qualities commanding premium prices. The growing number of permitted nutritional content/health claims, many of which relate to well-being, coupled with emerging extraction and food processing technologies offers new exciting opportunities for small and medium size enterprises (SMEs) specializing in fresh produce to play an active role in the health market. Supporting SMEs, governments could benefit from savings in healthcare costs and value creation in the economy. Consumers could benefit from novel FF formats such as refrigerated RTE (ready-to-eat) meals, a variety of fresh-like meat-, fish-, and egg-based products, fresh-cut fruits and vegetables, cereal-based fermented foods and beverages. To preserve these valuable commodities, mild biological (enzymatic treatment, fermentation and, bio-preservation) and engineering solutions are needed. The latter include nonthermal techniques such as high-pressure treatment, cook-chill, sous-vide, mirco-encapsulation, vacuum impregnation and others. "De-constructive" culinary techniques such as 3D food printing and molecular gastronomy as well as developments in nutrigenomics and digital technologies facilitate novel product formats, personalization and access to niche markets. In the operational sense, moving from nourishment to health improvement demands a shift from defensive market-oriented to offensive market-developing strategies including collaborative networks with research organizations. © 2016 Institute of Food Technologists®.

  18. Pilot scale electron bombardment furnace for continuous casting; application to the trial preparation of 20 kg of uranium monocarbide rods; Appareil pilote de fusion par bombardement d'electrons et coulee continue - application a un essai de fabrication portant sur 20 kg de barreaux de monocarbure d'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Trouve, J; Genard, R; Treillou, A; Accary, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The authors describe a pilot scale electron beam furnace designed for continuous melting and casting of uranium-carbon alloys. This equipment allows the melting and casting processes to be completely automatically controlled, the cooling being carried out under vacuum and the discharge being effected without breaking the vacuum. In a pre-production run of 20 kg of slugs, the composition of practically all the pieces was controlled within {+-} 0,1 per cent C. The output of the furnace was 2,2 kg/hour. (authors) [French] Les auteurs decrivent un appareil pilote de fusion par bombardement d'electrons et coulee continue. Cet appareil, muni d'un systeme de coulee automatique, permet la fusion et la coulee d'alliages uranium-carbone, leur refroidissement sous vide et leur defournement, toutes ces operations se deroulant d'une maniere continue. Ils montrent qu'au cours d'une campagne preliminaire de fusion et coulee de 20 kg de barreaux, la teneur en carbone de la quasi-totalite des barreaux obtenus est controlee a 0,1 pour cent pres. La production horaire de l'appareillage est de 2,2 kg. (auteurs)

  19. La production mondiale des vins

    Directory of Open Access Journals (Sweden)

    Pierre GALET

    1970-06-01

    On sait peu de choses précises sur l'origine de la culture de la vigne en Gaule. Il est probable qu'il existait des lambrusques sauvages dans les forêts et les sous-bois dont les habitants récoltaient les raisins pour les consommer à l'état frais et peut-être en tiraient-ils aussi une boisson fermentée comme ils le faisaient pour l'orge ou pour le miel (hydromel. Il est vraisemblable aussi que les navigateurs phocéens, venus commercer sur les rivages de la Méditerranée, apportèrent du vin aux gaulois, leur apprirent à tailler la vigne et finalement, en établissant des comptoirs, amenèrent des boutures de vignes de leur propre pays. On sait que les gaulois apprécièrent très vite le vin et ce fut une des raisons de leurs invasion de la Toscane pour y consommer sur place cette « boisson magique ». Plus tard avec l'occupation romaine la culture de la vigne s'étendit dans toute la province narbonnaise, dans la vallée du Rhône jusqu'aux portes de Lyon, puis en Aquitaine. A leur tour les romains se mirent à apprécier les vins gaulois, de qualité supérieure à ceux récoltés en Italie sur les Hautains. A l'aide de la navigation fluviale sur le Rhône les vins gagnèrent Rome, ainsi que ceux embarqués dans les petits ports du rivage méditerranéen. Puis au cours des siècles et grâce notamment aux religieux catholiques la vigne se répandit dans toutes les provinces. A la veille de la Révolution, en 1788, on estimait la superficie cultivée à 1.567.000 hectares, produisant 27 millions d'hectolitres. Au cours du XIXe siècle, les plantations augmentèrent en raison des facilités de transport que permettait l'établissement des lignes de chemin de fer. Le ravitaillement des grandes villes fut assuré par la création d'un important vignoble dans le Midi. En 1875, la superficie cultivée dépassait 2,4 millions d'hectares et la France produisit 83,8 millions d'hectolitres, record absolu qui ne fut jamais plus atteint depuis. La crise phyllox

  20. Primary processes in radiation chemistry. LET (Linear Energy Transfer) effect in water radiolysis; Processus primaires en chimie sous rayonnement. Influence du transfert d'energie lineique sur la radiolyse de l'eau

    Energy Technology Data Exchange (ETDEWEB)

    Trupin-Wasselin, V

    2000-07-11

    The effect of ionizing radiations on aqueous solutions leads to water ionization and then to the formation of radical species and molecular products (e{sup -}{sub aq}, H{sup .}, OH{sup .}, H{sub 2}O{sub 2}, H{sub 2}). It has been shown that the stopping power, characterized by the LET value (Linear Energy Transfer) becomes different when the nature of the ionizing radiations is different. Few data are nowadays available for high LET radiations such as protons and high energy heavy ions. These particles have been used to better understand the primary processes in radiation chemistry. The yield of a chemical dosimeter (the Fricke dosimeter) and those of the hydrogen peroxide have been determined for different LET. The effect of the dose rate on the Fricke dosimeter yield and on the H{sub 2}O{sub 2} yield has been studied too. When the dose rate increases, an increase of the molecular products yield is observed. At very high dose rate, this yield decreases on account of the attack of the molecular products by radicals. The H{sub 2}O{sub 2} yield in alkaline medium decreases when the pH reaches 12. This decrease can be explained by a slowing down of the H{sub 2}O{sub 2} formation velocity in alkaline medium. Superoxide radical has also been studied in this work. A new detection method: the time-resolved chemiluminescence has been perfected for this radical. This technique is more sensitive than the absorption spectroscopy. Experiments with heavy ions have allowed to determine the O{sub 2}{sup .-} yield directly in the irradiation cell. The experimental results have been compared with those obtained with a Monte Carlo simulation code. (O.M.)

  1. Product (RED)

    DEFF Research Database (Denmark)

    Ponte, Stefano

    2011-01-01

    ) and the consumers who buy iconic brand products to help ‘distant others’. While in many other forms of causumerism, labels or certification systems ‘prove’ that a product is just, in RED, aid celebrities provide the proof. From the consumer point of view both labels and celebrities provide a similar simplification...... of complex social, economic, and environmental processes. At the same time, we argue that there are important distinctions as well—labels and certifications are ultimately about improving the conditions of production, whereas RED is about accepting existing production and trade systems and donating......(PRODUCT)RED™ (hereafter RED) is a cobranding initiative launched in 2006 by the aid celebrity Bono to raise money from product sales to support The Global Fund to Fight AIDS, Tuberculosis and Malaria. In this paper we argue that RED is shifting the boundaries of ‘causumerism’ (shopping...

  2. Generalized product

    OpenAIRE

    Greco, Salvatore; Mesiar, Radko; Rindone, Fabio

    2014-01-01

    Aggregation functions on [0,1] with annihilator 0 can be seen as a generalized product on [0,1]. We study the generalized product on the bipolar scale [–1,1], stressing the axiomatic point of view. Based on newly introduced bipolar properties, such as the bipolar increasingness, bipolar unit element, bipolar idempotent element, several kinds of generalized bipolar product are introduced and studied. A special stress is put on bipolar semicopulas, bipolar quasi-copulas and bipolar copulas.

  3. Swine production.

    Science.gov (United States)

    Plain, Ronald L; Lawrence, John D

    2003-07-01

    The US swine industry is large and growing. The quantity of pork desired by consumers of US pork is growing at the rate of 1.5%/y. New production systems and new technology have enabled production per sow to grow at a rate of 4% annually in recent years. Consequently, the number of sows in the United States is declining. Because productivity growth is outpacing demand growth, the deflated price of hogs and pork is declining. Hog production and prices continue to exhibit strong seasonal and cyclic patterns. Pork production is usually lowest in the summer and highest in the fall. Production and prices tend to follow 4-year patterns. The US swine industry continues to evolve toward fewer and larger producers who rely on contracts for both hog production and marketing. In 2000, over half of the hogs marketed were from approximately 156 firms marketing more than 50,000 head annually. These producers finished 60% of their production in contract facilities. Over 90% of their marketings were under contract or were owned by a packer. These producers expressed a high level of satisfaction with hog production. Both they and their contract growers were satisfied with production contracts. These large producers were satisfied with their marketing contracts and planned to continue them in the future. The hog industry has changed a great deal in the last decade. There is little reason to believe this rapid rate of change will not continue. This swine industry is highly competitive and profit driven. Profit margins are too small to allow producers the luxury of ignoring new technology and innovative production systems. Consequently, hog production will continue its rapid evolution from traditional agriculture to typical industry.

  4. Emo. Origini, significati e caratteristiche della “sottocultura delle emozioni” / Emo. Origines, significations et caractéristiques de la “sous-culture des émotions” / Emo movement. Origins, meanings and characteristics of the “emotions subculture”

    Directory of Open Access Journals (Sweden)

    Serafin G.

    2010-12-01

    Full Text Available Uno dei fenomeni giovanili, che oggi pare essere sempre più preoccupante, è quello degli “emo”. Sembra trattarsi di un movimento sottoculturale che, almeno inizialmente, muove i primi passi dal punk della fine degli anni ’70. Uno degli aspetti che caratterizza questa moderna subcultura giovanile di matrice gotica è dato da una filosofia di vita nichilista e dal ricorso all’autolesionismo. Il più delle volte si tratta di giovani e adolescenti con il bisogno di cercare una propria dimensione e che, come è facilmente intuibile dalla stessa parola “emo”, sono alla ricerca di emo-zioni.Con questo lavoro, che non pretende assolutamente di essere una esaustiva trattazione del fenomeno, si cerca di gettare alcune basi per lo studio e la comprensione di quello che sembra essere un sempre più diffuso sintomo di un disagio giovanile.L’analisi delle storie di vita di alcuni giovani emo dovrebbe, pertanto, consentire se non altro di fornire un inquadramento del movimento nei suoi tratti salienti. Un des phénomènes juvéniles qui aujourd'hui paraît être de plus en plus préoccupant est celui des « emo ». Il s’agit d'un mouvement sous-culturel qui, au moins initialement, remue les premiers pas du punk de la fin des années 70. Une philosophie de vie nihiliste et le recours à l’automutilation sont certains des aspects qui caractérisent cette sous-culture juvénile contemporaine de matrice gothique. Il s’agit le plus souvent de jeunes et d’adolescents qui ont besoin de trouver leur propre vie et qui sont – comme l’on peut deviner du même mot « emo » - à la recherche d'émo-tions.Cet article, qui ne prétend pas être une étude exhaustive du phénomène, essaye de jeter les bases pour l'analyse et la compréhension de ce qui semble être un symptôme d’un malaise juvénile de plus en plus diffusé.L'analyse des récits de vie de certains jeunes « emo » devrait, donc, permettre de fournir un encadrement du mouvement

  5. Research trends in radiobiology since 40 years. a new approach: the enzymatic repair function of DNA, internal factor in evolution of biological systems under irradiation; Etude des tendances des recherches en radiologie depuis 40 ans. Une nouvelle voie de recherche: la fonction de reparation enzymatique de l'ADN, facteur interne d'evolution des systemes biologiques sous rayonnement

    Energy Technology Data Exchange (ETDEWEB)

    Mouton, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    'on croyait encore que les effets des rayonnements sur les systemes vivants etaient des effets directs, immediats, irreparables et definitifs. Depuis lors, on s'est rendu compte que les radiolesions pouvaient resulter d'effets indirects, etre tardives, reparables, et le plus souvent modifiables par des traitements chimiques ou biochimiques ad hoc. Cependant, la percee decisive en radiobiologie se situe entre 1962 et 1964, avec la decouverte que la cellule possede un mecanisme de defense active vis-a-vis de tout ce qui peut porter atteinte a l'integrite du patrimoine genetique inscrit dans la structure meme de l'ADN. L'existence d'une quatrieme fonction de l'ADN, celle d'auto-reparation, par voie enzymatique sous controle genetique, apporte enfin a la radiobiologie la base biologique moleculaire qui lui manquait pour sortir de la nuit 'phenomenologique' ou elle s'etait enfoncee apres l'abandon de la generalisation de la theorie de Lea, faute de preuve experimentale. Dans la seconde partie, cette fois prospective, de l'etude l'auteur tente une synthese elargie en considerant le role que peut jouer cette fonction de reparation de l'ADN non seulement du point de vue de la survie des systemes biologiques irradies en presence ou non d'agents modificateurs de dose ou mutagenes, mais aussi de celui de l'evolution naturelle ou artificielle de ces systemes sous rayonnement. Les donnees les plus recentes de la litterature sont en accord avec ce qui ne constitue encore qu'une hypothese generale de recherche. Des travaux portant sur les caracteres phenotypiques et genotypiques lies a l'acquisition de radioresistance gamma et UV, chez 'Escherichia coli K12', ont ete entrepris par l'auteur, en collaboration avec O. Tremeau en vue d'apporter une contribution experimentale nouvelle a cet egard. (auteur)

  6. Geopressure and Trap Integrity Predictions from 3-D Seismic Data: Case Study of the Greater Ughelli Depobelt, Niger Delta Pressions de pores et prévisions de l’intégrité des couvertures à partir de données sismiques 3D : le cas du grand sous-bassin d’Ughelli, Delta du Niger

    Directory of Open Access Journals (Sweden)

    Opara A.I.

    2012-05-01

    Full Text Available The deep drilling campaign in the Niger Delta has demonstrated the need for a detailed geopressure and trap integrity (drilling margin analysis as an integral and required step in prospect appraisal. Pre-drill pore pressure prediction from 3-D seismic data was carried out in the Greater Ughelli depobelt, Niger Delta basin to predict subsurface pressure regimes and further applied in the determination of hydrocarbon column height, reservoir continuity, fault seal and trap integrity. Results revealed that geopressured sedimentary formations are common within the more prolific deeper hydrocarbon reserves in the Niger Delta basin. The depth to top of mild geopressure (0.60 psi/ft ranges from about 10 000 ftss to over 30 000 ftss. The distribution of geopressures shows a well defined trend with depth to top of geopressures increasing towards the central part of the basin. This variation in the depth of top of geopressures in the area is believed to be related to faulting and shale diapirism, with top of geopressures becoming shallow with shale diapirism and deep with sedimentation. Post-depositional faulting is believed to have controlled the configuration of the geopressure surface and has played later roles in modifying the present day depth to top of geopressures. In general, geopressure in this area is often associated with simple rollover structures bounded by growth faults, especially at the hanging walls, while hydrostatic pressures were observed in areas with k-faults and collapsed crested structures. Les campagnes de forages profonds dans le delta du Niger ont démontré la nécessité d’une analyse détaillée des surpressions et de l’intégrité des structures pour évaluer correctement les prospects. La prédiction des pressions interstitielles a pu être réalisée ici avant forage à partir de données sismiques 3-D du grand sous-bassin d’Ughelli, dans le delta du Niger. Ce travail a permis de prévoir les régimes de pression du

  7. Situation de la cercosporiose noire des bananiers et plantains Musa spp. sous différents systèmes de culture à Yangambi, Haut-Zaïre

    Directory of Open Access Journals (Sweden)

    Mobambo, KN.

    1993-01-01

    Full Text Available Black sigatoka situation of bananas and plantains Musa spp. under different farming systems at Yangambi, Upper-Zaire. Black sigatoka, a leaf spot disease, caused by Mycosphaerella fijiensis Morelet seems to be one of the major constraints in the banana and plantain production in Upper-Zaire. Indeed, a survey study undertaken at Yangambi on 12 plantain and 4 banana cultivars revealed that all the observed cultivars were attacked with an exception of banana "Yangambikm 5" which was tolerant. In otherhand, significant differences were observed between bananas and plantains cultivated in fields and those planted in backyards. The regular application of organic matter in backyard farms seems to be one of the major reasons of those differences.

  8. Understanding and predicting the behaviour of silver base neutron absorbers under irradiations; Comprehension et prediction du comportement sous irradiation neutronique d`alliages absorbants a base d`argent

    Energy Technology Data Exchange (ETDEWEB)

    Desgranges, C

    1998-12-31

    The effect of neutron irradiation induced transmutations on the swelling of AgInCd (AIC) alloys used as neutron absorber in the control rods of Pressurized Water Reactors has been studied both experimentally and theoretically. Effective atomic volumes have been determined in synthetic AgCdInSn alloys with various compositions and containing fcc and hc phases, representative of irradiated AIC (Sn is a transmutation product). Swelling is shown to result first from the transmutation of Ag into Cd and of In into Sn, both with larger effective volume than the mother atom, and second from grain boundaries precipitation of s still less dense hc phase when solid solubility of transmuted products is exceeded. For both fcc and hc phases, we have determined profiles at the temperatures in the vicinity of the operating temperature. Unusual characteristics of second phase growth at grain boundaries induced by transmutations are identified on a simple binary alloy model: kinetics is controlled by irradiation temperature which scales diffusivities and flux which scales transmutation rates, as well as by the grain size in the underlying matrix. To address the AgInCdSn alloys, a novel technique is proposed to model diffusion in multicomponent alloys. It is based on a linearization of a simple atomistic model. With a single set of parameters, for each phase, our model well reproduces our interdiffusion measurements in quaternary alloys as well as existing interdiffusion experiments in binary alloys. Finally this diffusion model implemented with a moving interface algorithm is used to model the growth of the second phase induced by transmutation in the AIC under irradiation. (authors) 74 refs.

  9. Disposal of Radioactive Waste in the Subsurface of the Federal Republic of Germany: Geological and Hydro-Geological Problems; Elimination des Dechets Radioactifs dans le Sous-Sol de la Republique Federale d'Allemagne: Problemes Geologiques et Hydrogeologiques; 041f 041e 0414 ; Evacuacion de Desechos Radiactivos en el Subsuelo de la Republica Federal de Alemania Problemas Geologicos e Hidrogeologicos

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, R.; Richter, W. [Bundesanstalt fuer Bodenforschung, Hannover (Germany)

    1960-07-01

    The geological and hydrogeological problems related to the subsurface disposal of radioactive wastes in the Federal Republic of Germany are outlined. Special consideration is given to the possibility of storing solid and liquid wastes in the salt-domes widespread in the north-west, and of injecting liquid waste into deep reservoirs containing briny water and located in favourable geologic structures. (author) [French] Les auteurs decrivent les problemes geologiques et hydrogeologiques que pose, dans la Republique federale d'Allemagne, l'elimination des dechets radioactifs dans le sous-sol. Ils examinent notamment la possibilite d'emmagasiner des dechets solides et liquides dans les salines, qui abondent dans la partie nord-ouest et d'injecter des dechets liquides dans de profonds reservoirs d'eau saline, situes dans des formations geologiques presentant des conditions favorables. (author) [Spanish] Los autores exponen los problemas geologicos e hidrogeologicos que plantea la evacuacion de desechos radiactivos en el subsuelo de la Republica Federal de Alemania. Examinan sobre todo la posibilidad de almacenar desechos solidos y liquidos en los domos de sal, muy abundantes en el noroeste del pais, y de inyectar desechos liquidos en depositos profundos de agua salobre situados en estructuras geologicas que presentan condiciones favorables. (author) [Russian] Privoditsja opisanie geologicheskih i gidrogeologicheskih problem, svjazannyh s podzemnym udaleniem radioaktivnyh othodov v Federal'noj Respublike Germanii. Osoboe vnimanie udeljaetsja vozmozhnosti skladirovanija tverdyh i zhidkih othodov v soljanyh kupolah, imejushhihsja v bol'shom kolichestve v severo- zapadnoj chasti Germanii, i zahoronenija zhidkih othodov v glubokie rezervuary, soderzhashhie solenye vody i raspolozhennye v podhodjashhih geologicheskih strukturah. (author)

  10. Theoretical aspects of neutron interaction: part 1 - interaction programme for ibm 7094, part 2 - the shielding sub-programme, part 3 - listing of the programme; Aspects theoriques de l'interaction neutronique: annexe 1 - programme interaction pour ibm 7094 - annexe 2 - sous programme ombre - annexe 3 - liste du programme

    Energy Technology Data Exchange (ETDEWEB)

    Moret-Bailly, J; Penet, F; Spinelli, J C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    Part I. Methods are described for obtaining the equations for a system of elements containing fissile matter: a) by using the balance after fission, b) by using the balance before fission, c) by the evolution equations. All these methods lead to equivalent matrices whose greatest proper value is the multiplication coefficient for the system K. It is shown how to calculate K. From this it is possible to deduce the rules which generalize the criterion for the bounded solid angle. An IBM 7094 programme applies this theory to the calculation of the installations made up of a maximum of 500 elements. It calculates the effective values of K, the leaks, the solid angles and then K. Part. II. This sub-programme calculates the shielding between the elements. (authors) [French] Sommaire, - Annexe I. On expose les methodes permettant d'obtenir les equations d'un systeme d'elements contenant de la matiere fissile: a) par le bilan apres fission, b) par le bilan avant fission, c) par les equations d'evolution. Toutes ces methodes conduisent a des matrices equivalentes dont la plus grande valeur propre est le coefficient de multiplication de l'ensemble K. On montre comment K se calcule. On en deduit des regles qui generalisent le critere de l'angle solide limite. Un programme pour IBM 7094 applique cette theorie au calcul des installations comportant au maximum 500 elements. II calcule les k effectifs, les fuites, les angles solides puis K. Annexe II. Ce sous-programme calcule les ombres entre les elements. (auteurs)

  11. Construction, Cost and Use of an Enriched Uranium, Light-Water Subcritical Assembly; Assemblage Sous-Critique a Uranium Enrichi et Eau Legere; Realisation, Cout et Application; Realizatsiya i stoimost' podkriticheskoj sborki na obogashchennom urane i legkoj vode; Construccion, Coste y Aplicacion de un Conjunto Subcritico de Uranio Enriquecido

    Energy Technology Data Exchange (ETDEWEB)

    Vittoz, B.; Berthet, P.; Gavin, P.; Mandrin, C.; Robert, P.; Thurnheer, J. [Ecole Polytechnique de l' Universite de Lausanne (Switzerland)

    1964-02-15

    Designed for the experimental investigation of multiplying lattices, the Lausanne subcritical assembly is also used for teaching purposes. It is extremely versatile. The authors explain why the Nuclear Engineering Laboratory of the Ecole Polytechnique, University of Lausanne, decided to construct a subcritical assembly, relying as far as possible on its own resources, and why a slightly enriched uranium, light-water lattice was selected. The construction and arrangements are such that the lattice and neutron input parameters can be varied quickly and easily. 1. The uranium rods are vertically suspended and each suspension point has two degrees of freedom and can be continuously varied. Hence the lattice spacing, for example, can also be continuously varied. 2. The neutron input is provided by five Pu-Be sources placed in a graphite base. The spacing of these sources can also be continuously regulated. The paper discusses the safety problems the facility involves because of the fact that the reactivity can vary a great deal from one configuration to the other. It also explains the general construction and operational costs. The facility is used, inter alia, to study a non-periodic lattice with a view to obtaining a uniform flux. For this purpose the heterogeneous theory developed by Feinberg and Horning is used. A lattice in which the rods are identically arranged in non-equidistant, parallel n-planes is first considered. Each plane is a fast- neutron source and an absorber of thermal neutrons. Outside these planes, two-group diffusion equations are used. If the characteristics of a single plane are known the neutron flux for the n- planes can be forecast. These characteristics are determined experimentally, with due regard to the vertical variation of the neutron flux. The role played by the distance between the rods in a given plane is also investigated. (author) [French] Destine a l'etude experimentale des reseaux ienultiplicateurs, l'assemblage sous-critique de

  12. Antiproton production

    International Nuclear Information System (INIS)

    Allaby, J.V.

    1984-01-01

    The basic definitions used in the physics literature on particle production are reviewed. The data on anti p production are interpreted in order to provide an estimate of the yield of anti p's from typical target at the antiproton accumulator, including the effects of re-absorption in the target. (orig.)

  13. The thin layer technique and its application to electron microscopy; La technique des couches minces et son application a la microscopie electronique

    Energy Technology Data Exchange (ETDEWEB)

    Ranc, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-10-15

    This work deals with the technique of thin layers obtained by evaporation under vacuum, in the thickness range extending from a few monoatomic layers to several hundred angstroms. The great theoretical and practical interest of these layers has, it is well known, given rise to many investigations from Faraday onwards. Within the necessarily restricted limits of this study, we shall approach the problem more particularly from the point of view of: - their production; - their use in electron microscopy. A critical appraisal is made, in the light of present-day knowledge, based on our personal experience and on an extensive bibliography which we have collected on the subject. (author) [French] Le present travail concerne la technique des couches minces obtenues par evaporation sous vide, dans le domaine d'epaisseur qui s'etend de quelques couches monoatomiques a plusieurs centaines d'angstroms. L'interet theorique et pratique considerable de ces couches a suscite, comme on sait, de nombreux travaux depuis Faraday. Dans le cadre necessairement restreint de cette these, nous aborderons plus particulierement le point de vue de: - leur obtention; - leur utilisation en microscopie electronique. Il s'agit d'une mise au point critique, a la lumiere des connaissances actuelles, appuyee sur notre experience personnelle et sur une importante bibliographie, qu'il nous a ete donne de reunir a ce sujet. (auteur)

  14. The thin layer technique and its application to electron microscopy; La technique des couches minces et son application a la microscopie electronique

    Energy Technology Data Exchange (ETDEWEB)

    Ranc, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-10-15

    This work deals with the technique of thin layers obtained by evaporation under vacuum, in the thickness range extending from a few monoatomic layers to several hundred angstroms. The great theoretical and practical interest of these layers has, it is well known, given rise to many investigations from Faraday onwards. Within the necessarily restricted limits of this study, we shall approach the problem more particularly from the point of view of: - their production; - their use in electron microscopy. A critical appraisal is made, in the light of present-day knowledge, based on our personal experience and on an extensive bibliography which we have collected on the subject. (author) [French] Le present travail concerne la technique des couches minces obtenues par evaporation sous vide, dans le domaine d'epaisseur qui s'etend de quelques couches monoatomiques a plusieurs centaines d'angstroms. L'interet theorique et pratique considerable de ces couches a suscite, comme on sait, de nombreux travaux depuis Faraday. Dans le cadre necessairement restreint de cette these, nous aborderons plus particulierement le point de vue de: - leur obtention; - leur utilisation en microscopie electronique. Il s'agit d'une mise au point critique, a la lumiere des connaissances actuelles, appuyee sur notre experience personnelle et sur une importante bibliographie, qu'il nous a ete donne de reunir a ce sujet. (auteur)

  15. Part III: Comparing observed growth of selected test organisms in food irradiation studies with growth predictions calculated by ComBase softwares

    International Nuclear Information System (INIS)

    Farkas, J.; Andrassy, E.; Meszaros, L.; Beczner, J.; Polyak-Feher, K.; Gaal, O.; Lebovics, V.K.; Lugasi, A.

    2009-01-01

    As a result of intensive predictive microbiological modelling activities, several computer programs and softwares became available recently for facilitating microbiological risk assessment. Among these tools, the establishment of the ComBase, an international database and its predictive modelling softwares of the Pathogen Modelling Program (PMP) set up by the USDA Eastern Regional Research Center, Wyndmore, PA, and the Food Micromodel/Growth Predictor by the United Kingdom's Institute of Food Research, Norwich, are most important. The authors have used the PMP 6.1 software version of ComBase as a preliminary trial to compare observed growth of selected test organisms in relation to their food irradiation work during recent years within the FAO/IAEA Coordinated Food Irradiation Research Projects (D6.10.23 and D6.20.07) with the predicted growth on the basis of growth models available in ComBase for the same species as those of the authors' test organisms. The results of challenge tests with Listeria monocytogenes inoculum in untreated or irradiated experimental batches of semi-prepared breaded turkey meat steaks (cordon bleu), sliced tomato, sliced watermelon, sliced cantaloupe and sous vide processed mixed vegetables, as well as Staphylococcus aureus inoculum of a pasta product, tortellini, were compared with their respective growth models under relevant environmental conditions. This comparison showed good fits in the case of non-irradiated and high moisture food samples, but growth of radiation survivors lagged behind the predicted values. (author)

  16. The potential to intensify sulforaphane formation in cooked broccoli (Brassica oleracea var. italica) using mustard seeds (Sinapis alba).

    Science.gov (United States)

    Ghawi, Sameer Khalil; Methven, Lisa; Niranjan, Keshavan

    2013-06-01

    Sulforaphane, a naturally occurring cancer chemopreventive, is the hydrolysis product of glucoraphanin, the main glucosinolate in broccoli. The hydrolysis requires myrosinase isoenzyme to be present in sufficient activity; however, processing leads to its denaturation and hence reduced hydrolysis. In this study, the effect of adding mustard seeds, which contain a more resilient isoform of myrosinase, to processed broccoli was investigated with a view to intensify the formation of sulforaphane. Thermal inactivation of myrosinase from both broccoli and mustard seeds was studied. Thermal degradation of broccoli glucoraphanin was investigated in addition to the effects of thermal processing on the formation of sulforaphane and sulforaphane nitrile. Limited thermal degradation of glucoraphanin (less than 12%) was observed when broccoli was placed in vacuum sealed bag (sous vide) and cooked in a water bath at 100°C for 8 and 12 min. Boiling broccoli in water prevented the formation of any significant levels of sulforaphane due to inactivated myrosinase. However, addition of powdered mustard seeds to the heat processed broccoli significantly increased the formation of sulforaphane. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

  17. Radioisotope production

    International Nuclear Information System (INIS)

    1988-01-01

    The trial production runs started in the previous report period were continued and have been extended to 67 Ga, 81 Rb/ 81m Kr and 111 In, the production of which will be taken over from the Pretoria cyclotron at the end of this year, when that machine is scheduled to be shut down. After commissioning of the target water cooling system and the helium cooling system for beam foil windows at the beginning of this year, these production runs could also be extended to high beam currents (up to 50 μA). Test consignments of a number of products have been supplied to various potential future users, and 123 I, in the form of Na 123 I capsules as well as 123 I-sodium hippurate, and 52 Fe-citrate have actually been used with success in trial diagnostic studies on patients. A procedure for labelling IPPA and 3-IPMPA with 123 I has been developed, while initial work has also been done on the radioiodination of monoclonal antifibrine antibodies. The last major facility needed for the commencement of the routine radioisotope production programme, namely the multiple-target facility, is now ready for installation in the production vault within the next few weeks, and routine production runs are expected to start in November 1988. 4 figs., 18 refs

  18. Ethanol production

    Energy Technology Data Exchange (ETDEWEB)

    Kolleurp, F; Daugulis, A J

    1985-05-01

    Extractive fermentation is a technique that can be used to reduce the effect of end-product inhibition through the use of a water-immiscible phase which removes fermentation products in situ. This has the beneficial effect of not only removing inhibitory products as they are formed (thus keeping reaction rates high) but also has the potential for reducing product recovery costs. We have chosen to examine the ethanol fermentation as a model system for end product inhibition and extractive fermentation, and have developed a computer model predicting the productivity enhancement possible with this technique. The model predicts an ethanol productivity of 82.6 g/L-h if a glucose feed of 750 g/L is fermented with a solvent having a distribution coefficient of 0.5 at a dilution rate of 5.0 h . This is more than 10 times higher than for a conventional chemostat fermentation of a 250 g/L glucose feed. In light of this, a systematic approach to extractive fermentation has been undertaken involving the screening of more than 1,000 solvents for their extractive properties. UNIFAC and UNIQUAC estimates of distribution coefficients and selectivities were compiled and ranked in a database, together with other important physical properties, such as density, surface tension and viscosity. Preliminary shake-flask and chemostat biocompatibility studies on the most promising solvents have been undertaken. The previous predictive, data base and experimental results are discussed.

  19. Comparative analysis of operation and safety of subcritical nuclear systems and innovative critical reactors; Analyse comparative du fonctionnement et de la surete de systemes sous-critiques et de reacteurs critiques innovants

    Energy Technology Data Exchange (ETDEWEB)

    Bokov, P.M

    2005-05-01

    The main goal of this thesis work is to investigate the role of core subcriticality for safety enhancement of advanced nuclear systems, in particular, molten salt reactors, devoted to both energy production and waste incineration/transmutation. The inherent safety is considered as ultimate goal of this safety improvement. An attempt to apply a systematic approach for the analysis of the subcriticality contribution to inherent properties of hybrid system was performed. The results of this research prove that in many cases the subcriticality may improve radically the safety characteristics of nuclear reactors, and in some configurations it helps to reach the 'absolute' intrinsic safety. In any case, a proper choice of subcriticality level makes all analyzed transients considerably slower and monotonic. It was shown that the weakest point of the independent-source systems with respect to the intrinsic safety is thermohydraulic unprotected transients, while in the case of the coupled-source systems the excess reactivity/current insertion events remain a matter of concern. To overcome these inherent drawbacks a new principle of realization of a coupled sub-critical system (DENNY concept) is proposed. In addition, the ways to remedy some particular safety-related problems with the help of the core sub-criticality are demonstrated. A preliminary safety analysis of the fast-spectrum molten salt reactor (REBUS concept) is also carried out in this thesis work. Finally, the potential of the alternative (to spallation) neutron sources for application in hybrid systems is examined. (author)

  20. Dynamique d'expansion des cacaoyères dans les zones de contact forêt-savane : cas de la sous-préfecture de Kokumbo (Centre de la Côte d'Ivoire

    Directory of Open Access Journals (Sweden)

    Kpangui, KB.

    2018-01-01

    Full Text Available Cocoa Expansion Dynamics in the Forest-Savanna Contact Zones: Case Study of the Sub-prefecture of Kokumbo (Côte d'Ivoire. In Ivory Coast, forests-savannah transition areas have been considered from the 1970s as unfavorable to cocoa cultivation. In recent years, however, there has been a comeback to the cocoa economy in these areas. This study carried out in the sub-prefecture of Kokumbo, aimed to map and to follows the spatial and temporal evolution of this crop using Landsat images of 1990, 2002 and 2016. In order to better understand the fundamentals of the peasant practices, surveys were carried out in different villages in the area. Treatment shows that the influence of cocoa culture is becoming increasingly important in the region. This cocoa crop is set up to the detriment of forests and savannahs, which have lost 25% and 58.1% of their initial area respectively. The surveys identified four types of cocoa farms, of which 65% of the plots were created between 2002 and 2014. Facing this relatively recent expansion, the issue of the sustainability of cocoa production systems in this region arises. Their agronomic and economic performances and their value for biodiversity conservation should be analyzed in future studies.

  1. Study of potential of nuclear waste transmutation and safety characteristics of an hybrid system: sub critical accelerator reactor; Etude du potentiel de transmutation et des caracteristiques de surete d`un systeme hybride: accelerateur reacteur sous critique

    Energy Technology Data Exchange (ETDEWEB)

    Tchistiakov, A

    1998-04-01

    The study of potential of nuclear waste transmutation for the new reactor systems - hybrid reactors - was the object of this work. Global review of different projects is presented. The basic physical parameters definitions, as neutron surplus and relative importance of external source neutrons, are introduced and explained. For these parameters, numerical values are obtained. The advantage in neutron surplus of fast system is noted. Equilibrium model and corresponding toxicities of different isotopes nd nuclear cycles are presented. Numerical analysis for equilibrium model converge validation are performed also. The study of neutron consumption by `transmutable` Long-Lived Fission Products (Tc, I and Cs) show the possibility of their incineration in dedicated fast hybrid reactors. Equilibrium model shown the influence of reprocessing losses level to cycle toxicity level. Relations between specific fuel inventories (mass normalised by power unit) for thermal and fast spectra are examined. The differences are relatively small. Finally, few hybrid reactor concepts with different objects were analysed. These studies confirm that in frameworks of certain Nuclear Energy scenarios the fast hybrid systems can reduce significantly the radio-toxicity of fuel cycle. Preliminary analyses of sub-critical reactor behaviour show big potential of this reactor type in `Transient of Power` kind of accident, even if more detailed study is necessary. (author)

  2. Product plots.

    Science.gov (United States)

    Wickham, Hadley; Hofmann, Heike

    2011-12-01

    We propose a new framework for visualising tables of counts, proportions and probabilities. We call our framework product plots, alluding to the computation of area as a product of height and width, and the statistical concept of generating a joint distribution from the product of conditional and marginal distributions. The framework, with extensions, is sufficient to encompass over 20 visualisations previously described in fields of statistical graphics and infovis, including bar charts, mosaic plots, treemaps, equal area plots and fluctuation diagrams. © 2011 IEEE

  3. Solid state processing of massive uranium mononitride, using uranium and uranium higher nitride powders as starting materials (1962); Preparation a l'etat solide de mononitrure d'uranium massif a partir de poudres d'uranium et de nitrures superieurs d'uranium (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Molinari, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1960-12-15

    The mechanism and the optimum conditions for preparing uranium mononitride have been studied. The results have been used for hot pressing (250 kg/cm{sup 2}, 1000 deg. C, under vacuum) a mixture of powders of uranium and uranium higher nitrides. The products obtained have been identified by X-ray measurements and may be - at will and depending upon the stoichiometry - either UN, or a cermet a U{sub {alpha}}-UN. As revealed by the curved shape of grain boundaries, the sinters obtained here do not easily evolve towards physico-chemical equilibrium when submitted to heat treatment. This behaviour is quite different from the one observed with uranium monocarbide prepared by a similar method. This fact may be ascribed to the insolubility in the matrix UN of particles of UO{sub 2} being present as impurities. The density, hardness and thermal conductivity of these products are higher than those measured on uranium nitride or cermets U-UN obtained by other methods. (author) [French] Apres une etude prealable du mecanisme et des conditions optimales de nitruration de l'uranium, on a montre qu'il est possible de preparer par frittage sous charge (250 kg/cm{sup 2}, 1000 deg. C sous vide) d'un melange de poudres d'uranium et de nitrures superieurs d'uranium, un produit qui a ete identifie par diffraction de rayons X. On peut ainsi obtenir a volonte, soit le monocarbure UN, soit un cermet U{sub {alpha}}-UN dans le cas de compositions sous-stoechiometriques. Au contraire du monocarbure d'uranium prepare dans des conditions analogues, les produits obtenus ici, soumis a un traitement thermique, n'evoluent pas facilement vers un etat d'equilibre physico-chimique caracterise par l'existence de joints de grains rectilignes. On attribue ce phenomene a l'insolubilite de l'impurete UO{sub 2} dans UN. La densite, la durete, la conductibilite thermique de ces produits se revelent superieures a celles des nitrures d'uranium ou des cermets U-UN obtenus par les autres methodes. (auteur)

  4. Tanning Products

    Science.gov (United States)

    ... must obtain a signed, FDA-prescribed risk acknowledgement certification before use that states that they have been informed of the risks to health that may result from use of sunlamp products. Using tanning lamps, booths, or beds: If you ...

  5. Bc production

    International Nuclear Information System (INIS)

    Lusignoli, M.; Masetti, M.; Petrarca, S.

    1991-01-01

    The pseudoscalar meson B c is the simplest particle containing more than one heavy quark of different flavours. Its production cross sections at accelerators presently running or in project are estimated using the HERWIG parton shower Monte Carlo code. (orig.)

  6. Production models

    DEFF Research Database (Denmark)

    Svensson, Carsten

    2002-01-01

    The Project is co-financed with Nilpeter A/S and investigates the industrialization of build to order production. Project content: - Enterprise engineering - Specification processes - Mass Customization/ Build To Order - Knowledge/information management - Configuration - Supply Chain Management...

  7. Marketplace Products

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Office of Enterprise Data and Analytics, within the Centers for Medicare aqnd Medicaid Services (CMS), has developed a set of information products and analytics...

  8. Lean production

    OpenAIRE

    Veselková, Jana

    2011-01-01

    The goal of this Bachelor's Thesis is to describe the general principles of lean production and afterwards apply these principles in a particular company. Due to the changing conditions on the world market is among companies growing concern about such innovative business systems. The theoretical part of this work deals with the general characteristics of lean production, including their history and focus on Toyota, as the originator of most lean systems. Mentioned are also the economic aspect...

  9. Productive Gaming

    OpenAIRE

    Brandstätter , Ulrich; Sommerer , Christa

    2016-01-01

    Part 4: Short Papers; International audience; Video games can be appropriated for productive purposes. Commercial games and game engines are often used for video productions, and game development companies provide development kits and modding environments to gaming communities and independent developers. With gamification, game principles are deployed in non-game contexts for benefits beyond pure entertainment. Most approaches are more focused on using games and their design elements rather t...

  10. Du cannabis sous les cacaoyers : épuisement du modèle pionnier et reproduction des « institutions de la frontière » en Côte d’Ivoire forestière

    Directory of Open Access Journals (Sweden)

    Leonard Eric

    2001-11-01

    pionniers cacaoyers du Sud-Ouest, dans la mesure où il coïncide avec l’épuisement du modèle pionnier de mise en valeur du milieu et de régulation socio-économique, appelle une lecture attentive des dynamiques institutionnelles qui ont supporté son essor. Il apparaît, en effet, que l’organisation de la production de marihuana et, plus largement, celle de l’ensemble de la filière illicite sont venues soutenir, au moins durant la première moitié des années 90, le fonctionnement des institutions relevant du tutorat et les relations de type clientéliste qui en dérivent : l’innovation technique - l’intégration d’une nouvelle culture dans les systèmes de production - semble en l’occurrence avoir suppléé la dynamique d’innovations institutionnelles dans le champ de la régulation foncière, en permettant la reconduction de rapports sociaux spécifiques de la phase pionnière que l’épuisement de la frontière agricole semblait condamner. De façon plus générale, la production et le commerce de la marihuana semblent avoir fourni un support économique essentiel à des organisations qui avaient accompagné et soutenu le développement des fronts pionniers, non seulement dans le domaine de la production agricole mais aussi dans celui de la mise sur le marché aux niveaux national et international. Les filières de commercialisation intérieure du café et du cacao, durement touchées au cours des années 90 par la restructuration du système de régulation étatique et par l’assèchement des crédits bancaires, semblent, en particulier, avoir rencontré dans le développement des activités illicites un soutien financier que la sphère légale ne pouvait plus leur fournir 1. L’économie du cannabis a ainsi constitué durant la dernière décennie un facteur d’amortissement des crises de différente nature (financière, écologique, sociale qui remettaient en question la reproduction même du tissu d’exploitations agricoles et de relations

  11. Feasibility study for the installation of a small hydro electric power plant; Etude de faisabilite. Petite centrale hydro-electrique au lieu dit 'Sous les Roches' a Sonceboz

    Energy Technology Data Exchange (ETDEWEB)

    Tissot, N. [MHyLab, Mini-Hydraulics Laboratory, Montcherand (Switzerland); Hausmann, H. [Hans Hausmann, Bevilard (Switzerland)

    2003-07-01

    This report for the Swiss Federal Office of Energy presents a technical, economical and ecological analysis of the feasibility of a small hydroelectric power plant at Sonceboz, in the Swiss Jura mountains. The power of the planed plant would typically be 500 kW for a water head of about 10 m. The study shows that, compared to one single turbine, a pair of Kaplan type turbines would be operational over a larger range of the river's water flow rate. This solution would be a little bit more costly but offer more flexibility for maintenance. Two maximum water flow rates are considered, 4.5 and 6 m{sup 3}/s respectively. According to the economical study, done with current electric kWh prices, both configurations are viable while the largest flow rate leads to a larger profit. The report is rounded up by a sensitivity analysis considering variations in annual power generation, electro-mechanical and construction cost as well as turbine efficiency. It indicates that this last factor could be crucial for the overall profitability. [French] Ce rapport est le resultat detaille de l'analyse technico-economique et ecologique de faisabilite de la realisation d'une petite centrale hydroelectrique basse chute qui pourrait exploiter une denivellation d'environ 10 m pour une puissance de l'ordre de 500 kW pres de Sonceboz dans le Jura suisse. L'etude montre que le couplage de deux turbines Kaplan offrirait une possibilite de fonctionnement sur une plus grande plage de flux ainsi qu'une plus grande flexibilite de maintenance, ceci pour un cout legerement superieur a l'option a une seule turbine. Les debits de 4.5 et 6 m{sup 3}/s sont consideres. L'etude economique montre que le debit de 6 m{sup 3}/s est plus rentable au prix de vente actuel du kWh. L'article se termine par une analyse de sensibilite sur les incertitudes concernant la production annuelle, les prix de l'electromecanique et du genie civil et le rendement des

  12. Biocidal Products and Borderline Products

    OpenAIRE

    Yılmaz, Abdullah

    2015-01-01

    Biocidal product is defined as preparations sold in ready form to use that contains one or more active substances and has control effect, movement restriction or destruction against harmful organisms which has harmful effect on products that people use or produce or animals or environment. These substances which are composed mostly chemicals and ease our lifes are used in increasingly every areas of our life on the other hand they carry variety of risks and threaten our lives. In terms of env...

  13. Environmental products

    International Nuclear Information System (INIS)

    1995-12-01

    This volume in the series of directories of Quebec organizations doing research and development involving biomass-based products or processes focused on environmental products and services. The objective of this, and other directories in the series, was to stimulate interaction, and hence more aggressive development, of products and processes capable of being commercialized, to facilitate interaction between those who possess and those who could utilize biomass resources, and in general, to encourage the development of biomass-based industries. A total of 83 organizations were included in standardized format, describing areas of research interest, principal areas of technological expertise, major equipment, personnel and name and address of contact person. In this volume fields of research interest included environmental audits, waste treatment, biodegradation, composting, oxidation, photodegradation, disinfection and combustion. tabs

  14. Uranium production

    International Nuclear Information System (INIS)

    Spriggs, M.

    1980-01-01

    The balance between uranium supply and demand is examined. Should new resources become necessary, some unconventional sources which could be considered include low-grade extensions to conventional deposits, certain types of intrusive rock, tuffs, and lake and sea-bed sediments. In addition there are large but very low grade deposits in carbonaceous shales, granites, and seawater. The possibility of recovery is discussed. Programmes of research into the feasibility of extraction of uranium from seawater, as a by-product from phosphoric acid production, and from copper leach solutions, are briefly discussed. Other possible sources are coal, old mine dumps and tailings, the latter being successfully exploited commercially in South Africa. The greatest constraints on increased development of U from lower grade sources are economics and environmental impact. It is concluded that apart from U as a by-product from phosphate, other sources are unlikely to contribute much to world requirements in the foreseeable future. (U.K.)

  15. Bottom production

    International Nuclear Information System (INIS)

    Baines, J.; Baranov, S.P.; Bartalini, P.; Bay, A.; Bouhova, E.; Cacciari, M.; Caner, A.; Coadou, Y.; Corti, G.; Damet, J.; Dell-Orso, R.; De Mello Neto, J.R.T.; Domenech, J.L.; Drollinger, V.; Eerola, P.; Ellis, N.; Epp, B.; Frixione, S.; Gadomski, S.; Gavrilenko, I.; Gennai, S.; George, S.; Ghete, V.M.; Guy, L.; Hasegawa, Y.; Iengo, P.; Jacholkowska, A.; Jones, R.; Kharchilava, A.; Kneringer, E.; Koppenburg, P.; Korsmo, H.; Kramer, M.; Labanca, N.; Lehto, M.; Maltoni, F.; Mangano, M.L.; Mele, S.; Nairz, A.M.; Nakada, T.; Nikitin, N.; Nisati, A.; Norrbin, E.; Palla, F.; Rizatdinova, F.; Robins, S.; Rousseau, D.; Sanchis-Lozano, M.A.; Shapiro, M.; Sherwood, P.; Smirnova, L.; Smizanska, M.; Starodumov, A.; Stepanov, N.; Vogt, R.

    2000-01-01

    In the context of the LHC experiments, the physics of bottom flavoured hadrons enters in different contexts. It can be used for QCD tests, it affects the possibilities of B decays studies, and it is an important source of background for several processes of interest. The physics of b production at hadron colliders has a rather long story, dating back to its first observation in the UA1 experiment. Subsequently, b production has been studied at the Tevatron. Besides the transverse momentum spectrum of a single b, it has also become possible, in recent time, to study correlations in the production characteristics of the b and the b. At the LHC new opportunities will be offered by the high statistics and the high energy reach. One expects to be able to study the transverse momentum spectrum at higher transverse momenta, and also to exploit the large statistics to perform more accurate studies of correlations

  16. Bottom production

    Energy Technology Data Exchange (ETDEWEB)

    Baines, J.; Baranov, S.P.; Bartalini, P.; Bay, A.; Bouhova, E.; Cacciari, M.; Caner, A.; Coadou, Y.; Corti, G.; Damet, J.; Dell-Orso, R.; De Mello Neto, J.R.T.; Domenech, J.L.; Drollinger, V.; Eerola, P.; Ellis, N.; Epp, B.; Frixione, S.; Gadomski, S.; Gavrilenko, I.; Gennai, S.; George, S.; Ghete, V.M.; Guy, L.; Hasegawa, Y.; Iengo, P.; Jacholkowska, A.; Jones, R.; Kharchilava, A.; Kneringer, E.; Koppenburg, P.; Korsmo, H.; Kramer, M.; Labanca, N.; Lehto, M.; Maltoni, F.; Mangano, M.L.; Mele, S.; Nairz, A.M.; Nakada, T.; Nikitin, N.; Nisati, A.; Norrbin, E.; Palla, F.; Rizatdinova, F.; Robins, S.; Rousseau, D.; Sanchis-Lozano, M.A.; Shapiro, M.; Sherwood, P.; Smirnova, L.; Smizanska, M.; Starodumov, A.; Stepanov, N.; Vogt, R.

    2000-03-15

    In the context of the LHC experiments, the physics of bottom flavoured hadrons enters in different contexts. It can be used for QCD tests, it affects the possibilities of B decays studies, and it is an important source of background for several processes of interest. The physics of b production at hadron colliders has a rather long story, dating back to its first observation in the UA1 experiment. Subsequently, b production has been studied at the Tevatron. Besides the transverse momentum spectrum of a single b, it has also become possible, in recent time, to study correlations in the production characteristics of the b and the b. At the LHC new opportunities will be offered by the high statistics and the high energy reach. One expects to be able to study the transverse momentum spectrum at higher transverse momenta, and also to exploit the large statistics to perform more accurate studies of correlations.

  17. Phytosanitary products

    International Nuclear Information System (INIS)

    1995-12-01

    One of a series of directories of Quebec universities, industrial and governmental agencies in Quebec actively involved in research and development of phytosanitary products or services derived from or associated with biomass products. This directory contained standardized entries for 79 organizations from the agriculture, forestry and environmental sectors, active in fields ranging from genetic engineering, fertilizers, crop diseases and pest management, forestry management, harvesting methods and bioconversion. Each entry provided information about major fields of research interest, principal technologies utilized, major equipment, personnel, and name and address of person to be contacted for further information. tabs

  18. Aluminium production

    International Nuclear Information System (INIS)

    Winter, B.; Ayers, J.; Sammer, G.

    2001-01-01

    Aluminium is the most important non-ferrous metal by quantity. Aluminium is produced by electrolysis of aluminium oxide (also known as alumina). Alumina is produced by refining bauxite. The quantity of primary and secondary aluminium production in ECE-countries between 1992 and 1998 is shown. The European aluminium industry employs approximately 200 000 employees. The annual aluminium production in the European Union was 3.58 million tonnes in 1994, of which 44 % was secondary aluminium. In 1996 3.96 million tonnes of aluminium were produced in the EU, of which 44 % was secondary aluminium. (author)

  19. Controllable Pulse Frequency and Width System for Pulsing and Modulating Fast-Neutron Core Assemblies; Systeme a Frequence et Largeur d'Impulsions Ajustables Permettant la Pulsation et la Modulation de Milieux Multipliants Sous-Critiques a Neutrons Rapides; Sistema reguliruemykh chastoty i shiriny impul'sa, dayushaya impul's i modulyatsiyu razmnozhayushchikh sred na bystrykh nejtronakh; Sistema de Frecuencia y Amplitud de Impulso Ajustables, para Pulsar y Modular

    Energy Technology Data Exchange (ETDEWEB)

    Duquesne, M.; Lyon, F.; Schmitt, A. [Association Euratom-CEA-SECNR (France); Nucleaires de Cadarache, Centre d' Etudes [France; Gerbier, R. [Laboratoire des Accelerateurs - CEN de Grenoble (France); Nucleaires de Cadarache, Centre d' Etudes [France

    1965-10-15

    coincidence-anticoincidence unit, a time analyser and a digital data recorder. (author) [French] Les auteurs on mis au point un systeme permettant la production de bouffees de neutrons de largeur et de frequence de recurrence reglables independamment. Les temps de montee et de descente de ces bouffees sont de l'ordre de quelques nanosecondes. Ce systeme est applique aux experiences puisees et modulees a haute frequence. Pour la production de boufees de neutrons a extinction rapide, on procede par deflection d'un faisceau de deuterons purs prealablement acceleres et tries. Les ions autres que les deuterons atomiques sont elimines apres acceleration dans un aimant de tri a 10 Degree-Sign . Les auteurs etudient egalement un systeme de triage avant acceleration qui aurait l'avantage d'un encombrement reduit. Le faisceau de deuterons passe dans l'espace compris entre deux plaques ou regne normalement un champ electrostatique qui deflechit le faisceau sur les parois d'un diaphragme. On applique a la premiere plaque une tres large impulsion de tension qui annule le champ, ce qui a pour effet d'amener rapidement le faisceau sur la cible neutronigene (debut de la bouffee). La deuxieme plaque recoit ensuite une impulsion du meme type qui retablit le champ et fait disparaitre le faisceau de la cible (fin de la bouffee). Le front de montee des impulsions est de l'ordre de 10 ns; le temps de disparition sur la cible est inferieur a cette derniere valeur. La duree de la bouffee peut etre reglee a volonte dans les limites raisonnables par un retard convenable de la seconde impulsion par rapport a la premiere. Dans certains cas, le temps de transit des ions dans les plaques n'est pas negligeable par rapport a la duree de {Gamma} echelon qui leur est applique. On remplace alors l'une des plaques par une ligne a onde progressive a laquelle sont appliquees successivement les deux impulsions. L'impulsion de tension accompagne ainsi le paquet de deuterons qui produit la bouffee. Les fronts de

  20. Establishing research strategies, methodologies and technologies to link genomics and proteomics to seagrass productivity, community metabolism, and ecosystem carbon fluxes.

    Science.gov (United States)

    Mazzuca, Silvia; Björk, M; Beer, S; Felisberto, P; Gobert, S; Procaccini, G; Runcie, J; Silva, J; Borges, A V; Brunet, C; Buapet, P; Champenois, W; Costa, M M; D'Esposito, D; Gullström, M; Lejeune, P; Lepoint, G; Olivé, I; Rasmusson, L M; Richir, J; Ruocco, M; Serra, I A; Spadafora, A; Santos, Rui

    2013-01-01

    A complete understanding of the mechanistic basis of marine ecosystem functioning is only possible through integrative and interdisciplinary research. This enables the prediction of change and possibly the mitigation of the consequences of anthropogenic impacts. One major aim of the European Cooperation in Science and Technology (COST) Action ES0609 "Seagrasses productivity. From genes to ecosystem management," is the calibration and synthesis of various methods and the development of innovative techniques and protocols for studying seagrass ecosystems. During 10 days, 20 researchers representing a range of disciplines (molecular biology, physiology, botany, ecology, oceanography, and underwater acoustics) gathered at The Station de Recherches Sous-marines et Océanographiques (STARESO, Corsica) to study together the nearby Posidonia oceanica meadow. STARESO is located in an oligotrophic area classified as "pristine site" where environmental disturbances caused by anthropogenic pressure are exceptionally low. The healthy P. oceanica meadow, which grows in front of the research station, colonizes the sea bottom from the surface to 37 m depth. During the study, genomic and proteomic approaches were integrated with ecophysiological and physical approaches with the aim of understanding changes in seagrass productivity and metabolism at different depths and along daily cycles. In this paper we report details on the approaches utilized and we forecast the potential of the data that will come from this synergistic approach not only for P. oceanica but for seagrasses in general.

  1. Establishing research strategies, methodologies and technologies to link genomics and proteomics to seagrass productivity, community metabolism and ecosystem carbon fluxes

    Directory of Open Access Journals (Sweden)

    Silvia eMazzuca

    2013-03-01

    Full Text Available A complete understanding of the mechanistic basis of marine ecosystem functioning is only possible through integrative and interdisciplinary research. This enables the prediction of change and possibly the mitigation of the consequences of anthropogenic impacts. One major aim of the COST Action ES0609 Seagrasses productivity. From genes to ecosystem management, is the calibration and synthesis of various methods and the development of innovative techniques and protocols for studying seagrass ecosystems.During ten days, twenty researchers representing a range of disciplines (molecular biology, physiology, botany, ecology, oceanography, underwater acoustics gathered at the marine station of STARESO (Corsica to study together the nearby Posidonia oceanica meadow. The Station de Recherches Sous-marine et Océanographiques (STARESO is located in an oligotrophic area classified as "pristine site" where environmental disturbances caused by anthropogenic pressure are exceptionally low. The healthy P. oceanica meadow, that grows in front of the lab, colonizes the sea bottom from the surface to 37 m depth. During the study, genomic and proteomic approaches were integrated with ecophysiological and physical approaches with the aim of understanding changes in seagrass productivity and metabolism at different depths and along daily cycles. In this paper we report details on the approaches utilized and we forecast the potential of the data that will come from this synergistic approach not only for P. oceanica but for seagrasses in general.

  2. Technique of preparation of plutonium screens for soft x ray spectrography (1963); Technique de preparation d'ecrans de plutonium pour la spectrographie de rayons x mous (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Bersuder, L de [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1963-07-01

    The present work concerns the preparation of thin layers of pure plutonium (thickness 100 to 10000 A) by thermal vacuum evaporation. The protection of the plutonium against oxidation is obtained by vacuum deposition of aluminium layers under. and above the plutonium layer. The purity of the layers is checked by electron and X ray diffraction which has shown that very thin films of plutonium condense in {beta} form instead of {alpha}. (author) [French] Le present travail concerne la preparation de couches minces (epaisseurs de 100 a 10000 A) de plutonium pur par evaporation thermique sous vide. La protection du plutonium contre l'oxydation par l'air est obtenu grace a des couches d'aluminium deposees sous vide sous et sur la couche de plutonium. La purete des couches est verifiee par diffraction d'electrons et de rayons X ce qui a permis d'observer que les couches tres minces de plutonium se condensent en phase {beta} au lieu de la phase {alpha}. (auteur)

  3. Development of a technique of preparation of uranium screens for soft X Ray spectrography (1960); Mise au point d'une technique de preparation d'ecrans d'uranium pour la spectrographie de rayons X mous (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Bersuder, L de [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1961-07-01

    The present work concerns the preparation of thin layers of pure uranium (thickness 100 to 1000 Angstrom) by thermal evaporation under vacuum. The protection of uranium against oxidation is obtained by using aluminium deposits under and above the uranium layer. The purity of the layers obtained is checked by electron diffraction and the necessary conditions to avoid oxidation and alloy formation during the formation of deposit are studied. Three methods for measuring the thickness are examined: by {alpha} particle counting, by weighing the condensed mass and by weighing the evaporated mass. The method using {alpha} particle counting turned to be the most accurate for low thickness layers. (author) [French] Le present travail concerne la preparation de couches minces d'uranium pur (epaisseurs de 100 a 1000 Angstrom) par evaporation thermique sous vide. La protection de l'uranium contre l'oxydation par l'air est obtenue grace a des couches d'aluminium deposees sous vide sous et sur la couche d'uranium. La purete des couches obtenues est verifiee par diffraction d'electrons et les conditions necessaires pour eviter l'oxydation et la formation d'alliages lors du depot sont etudiees. Trois methodes de mesure des epaisseurs sont examinees, mesure par comptage de particules {alpha}, mesure par pesee de la masse condensee et mesure par pesee de la masse evaporee. La mesure par comptage de particules {alpha} s'avere etre la plus precise pour les couches de faibles epaisseurs. (auteur)

  4. Device for sampling sodium from a circuit with a view to dosing its impurities (1963); Dispositif de prelevement de sodium sur un cuicuit en vue du dosage des impuretes (1063)

    Energy Technology Data Exchange (ETDEWEB)

    Sannier, J; Vingot, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    The device described was developed with the two following essential conditions in mind: - absence of any pollution during the sampling operation and the transfer to the analysis apparatus; - simultaneous extraction of several samples, each one remaining representative of the sodium in the circuit. The sampling is therefore carried out completely in a vacuum in a Pyrex-glass apparatus, this limiting the sodium temperature to a maximum of 240 deg. C. The samples are in the form of bulbs sealed in vacuo containing 2 to 3 grams of sodium each. The analysis of the oxygen by the amalgamation technique, carried out on samples obtained by this method show a very satisfactory reproducibility for concentrations of under 20 ppm. (authors) [French] Le dispositif decrit a ete mis au point compte tenu des deux imperatifs essentiels suivants: - absence de toute pollution pendant les operations de prelevement et de transport vers l'appareil d'analyse; - obtention simultanee de plusieurs echantillons, chacun restant representatif du sodium du circuit. A cet effet, le prelevement est effectue entierement sous vide dans un appareillage en verre Pyrex, ce qui limite la temperature du sodium a 240 deg. C. Les echantillons se presentent sous la forme d'ampoules scellees sous vide et contenant chacune 2 a 3 grammes de sodium. L'analyse de l'oxygene par la technique d'amalgamation, effectuee sur des echantillons preleves par cette methode, revele une reproductibilite tres satisfaisante, dans le domaine des teneurs inferieures a 20 ppm. (auteurs)

  5. Uranium production

    International Nuclear Information System (INIS)

    Jones, J.Q.

    1981-01-01

    The domestic uranium industry is in a state of stagflation. Costs continue to rise while the market for the product remains stagnant. During the last 12 months, curtailments and closures of mines and mills have eliminated over 5000 jobs in the industry, plus many more in those industries that furnish supplies and services. By January 1982, operations at four mills and the mines that furnish them ore will have been terminated. Other closures may follow, depending on cost trends, duration of current contracts, the degree to which mills have been amortized, the feasibility of placing mines on standby, the grade of the ore, and many other factors. Open-pit mines can be placed on standby without much difficulty, other than the possible cost of restoration before all the ore has been removed. There are a few small, dry, underground mines that could be mothballed; however, the major underground producers are wet sandstone mines that in most cases could not be reopened after a prolonged shutdown; mills can be mothballed for several years. Figure 8 shows the location of all the production centers in operation, as well as those that have operated or are on standby. Table 1 lists the same production centers plus those that have been deferred, showing nominal capacity of conventional mills in tons of ore per calendar day, and the industry production rate for those mills as of October 1, 1981

  6. Novolak Production

    Science.gov (United States)

    Aiba, Hiroshi

    Novolak resins are produced by reacting formaldehyde (30-55% concentration) with phenol under acidic conditions, with oxalic acid as the preferred catalyst and in special conditions, sulfuric acid. Depending on the batch size, all raw material components can be introduced into the reactor, or when there is an increase in the batch size as well as in the reactor volume, the reaction exotherm is controlled by a gradual addition of formaldehyde. Modern novolak production facilities are automated and programmed for reduced operational cost. A flow diagram of a general production line for the manufacture of novolak is shown. Recovery of the novolak is accomplished by the removal of water and devolatilization of crude novolak to molten, low-free phenol novolak resin which can be isolated as flake or pastille or dissolved in appropriate solvents. Novolak is stored either in a solid flake or pastille form or in solution. Most production is conducted under atmospheric conditions, but there are some recent, novel activities such as pressure in a hermetically-closed reactor reaching 0.1-10 MPa by using the heat of reaction without reflux to shorten reaction time, accelerating dehydration time by flash distillation, and providing economic benefit in the cost of novolak production.

  7. Organisation of biological research carried out in the United States by the A.E.C. or under her contract (1960); Organisation des recherches biologiques menees aux Etats-Unis par l'A.E.C. ou sous son egide. Compte-rendu sommaire d'une mission d'etude (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Pellerin, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    This report is based on information gathered in the course of a trip to the United States, in November and December 1958 which consisted chiefly of visits to the main biological and medical research laboratories and discussions with the heads of these establishments. A description is given of the general organisation of the Atomic Energy Commission's Division of Biology and Medicine, and of the distribution of responsibility for radiation protection work and for biological, medical and agricultural research amongst the various Services attached to it; this is followed by a more detailed account of the activities carried on in this field at the great national laboratories. Finally, the systems of collaboration set up with external research organisations in the form of research contracts are examined, together with the substantial help provided by the A.E.C. for biological, medical and agricultural research in general, owing to a systematic policy of subsidising the distribution of radioisotopes for this purpose. (author) [French] Le present rapport a ete etabli sur la base des renseignements recueillis au cours d'un voyage d'etude aux Etats-Unis, en novembre et decembre 1958, comportant notamment la visite des principaux laboratoires de recherche biologique et medicale et des entretiens avec les principaux responsables de ces laboratoires. Apres une description de l'organisation generale de la 'Division of Biology and Medicine' de l'Atomic Energy Commission et de la repartition entre les divers Services qui lui sont rattaches des responsabilites concernant la protection contre les radiations et la Recherche biologique, medicale et agronomique, des indications plus detaillees sont donnees au sujet des activites poursuivies dans ce domaine au sein des grands laboratoires nationaux. Sont examinees enfin, l'importance et les modalites de la collaboration instituee avec les Organismes de Recherche exterieurs sous la forme de contrats de recherche ainsi que l

  8. Organisation of biological research carried out in the United States by the A.E.C. or under her contract (1960); Organisation des recherches biologiques menees aux Etats-Unis par l'A.E.C. ou sous son egide. Compte-rendu sommaire d'une mission d'etude (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Pellerin, J. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    This report is based on information gathered in the course of a trip to the United States, in November and December 1958 which consisted chiefly of visits to the main biological and medical research laboratories and discussions with the heads of these establishments. A description is given of the general organisation of the Atomic Energy Commission's Division of Biology and Medicine, and of the distribution of responsibility for radiation protection work and for biological, medical and agricultural research amongst the various Services attached to it; this is followed by a more detailed account of the activities carried on in this field at the great national laboratories. Finally, the systems of collaboration set up with external research organisations in the form of research contracts are examined, together with the substantial help provided by the A.E.C. for biological, medical and agricultural research in general, owing to a systematic policy of subsidising the distribution of radioisotopes for this purpose. (author) [French] Le present rapport a ete etabli sur la base des renseignements recueillis au cours d'un voyage d'etude aux Etats-Unis, en novembre et decembre 1958, comportant notamment la visite des principaux laboratoires de recherche biologique et medicale et des entretiens avec les principaux responsables de ces laboratoires. Apres une description de l'organisation generale de la 'Division of Biology and Medicine' de l'Atomic Energy Commission et de la repartition entre les divers Services qui lui sont rattaches des responsabilites concernant la protection contre les radiations et la Recherche biologique, medicale et agronomique, des indications plus detaillees sont donnees au sujet des activites poursuivies dans ce domaine au sein des grands laboratoires nationaux. Sont examinees enfin, l'importance et les modalites de la collaboration instituee avec les Organismes de Recherche exterieurs sous la forme de

  9. Product Configuration Systems and Productivity

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Lindgaard; Edwards, Kasper

    2004-01-01

    Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...

  10. Tequila production.

    Science.gov (United States)

    Cedeño, M

    1995-01-01

    Tequila is obtained from the distillation of fermented juice of agave plant, Agave tequilana, to which up to 49% (w/v) of an adjunct sugar, mainly from cane or corn, could be added. Agave plants require from 8 to 12 years to mature and during all this time cleaning, pest control, and slacken of land are required to produce an initial raw material with the appropriate chemical composition for tequila production. Production process comprises four steps: cooking to hydrolyze inulin into fructose, milling to extract the sugars, fermentation with a strain of Saccharomyces cerevisiae to convert the sugars into ethanol and organoleptic compounds, and, finally, a two-step distillation process. Maturation, if needed, is carried out in white oak barrels to obtain rested or aged tequila in 2 or 12 months, respectively.

  11. Lepton production

    CERN Multimedia

    2002-01-01

    This experiment aims to settle open questions in the hadronic production of electrons, muons and neutrinos. Prominent among these are $e/\\mu$ universality, the contribution of charm decay to lepton pair production, and the "anomalous" low mass pairs.\\\\ The experimental design aims to optimize the combination of:\\\\- electron identification\\\\ - muon identification \\\\ - missing energy measurement for neutrinos \\\\ - vertex identification (for $\\tau \\simeq \\tau_{charm}$). \\\\ \\\\ The major components of the apparatus are shown in the figure. In the vertex region a proton beam of transverse size $\\simeq 50 \\mu$ impinges on a beryllium target of diameter $50 \\mu$, and high precision tracking in the vertex region is achieved by silicon strip detectors. Charged particle momenta are measured using a dipole magnet and high resolution drift chambers. Electrons are identified by the combination of the transition radiation detector and the finely segmented front section of the Uranium/Liquid Argon calorimeter. Essentially t...

  12. Product customization

    DEFF Research Database (Denmark)

    Lueg, Rainer

    2015-01-01

    This case study deals with the extension, customization, and profitability of two new product lines of a bicycle manufacturer. It can serve both as a discussion basis in class as well as an exam for advanced Master students in management, marketing, and ccounting. The case illustrates how variance...... application of financial analysis can lead to dysfunctional decisions that run counter to a company’s business model....

  13. Isotope production

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Dewi M.

    1995-07-15

    Some 2 0% of patients using radiopharmaceuticals receive injections of materials produced by cyclotrons. There are over 200 cyclotrons worldwide; around 35 are operated by commercial companies solely for the production of radio-pharmaceuticals with another 25 accelerators producing medically useful isotopes. These neutron-deficient isotopes are usually produced by proton bombardment. All commonly used medical isotopes can be generated by 'compact' cyclotrons with energies up to 40 MeV and beam intensities in the range 50 to 400 microamps. Specially designed target systems contain gram-quantities of highly enriched stable isotopes as starting materials. The targets can accommodate the high power densities of the proton beams and are designed for automated remote handling. The complete manufacturing cycle includes large-scale target production, isotope generation by cyclotron beam bombardment, radio-chemical extraction, pharmaceutical dispensing, raw material recovery, and labelling/packaging prior to the rapid delivery of these short-lived products. All these manufacturing steps adhere to the pharmaceutical industry standards of Good Manufacturing Practice (GMP). Unlike research accelerators, commercial cyclotrons are customized 'compact' machines usually supplied by specialist companies such as IBA (Belgium), EBCO (Canada) or Scanditronix (Sweden). The design criteria for these commercial cyclotrons are - small magnet dimensions, power-efficient operation of magnet and radiofrequency systems, high intensity extracted proton beams, well defined beam size and automated computer control. Performance requirements include rapid startup and shutdown, high reliability to support the daily production of short-lived isotopes and low maintenance to minimize the radiation dose to personnel. In 1987 a major step forward in meeting these exacting industrial requirements came when IBA, together with the University of Louvain-La-Neuve in Belgium, developed the Cyclone-30

  14. Diboson production

    Directory of Open Access Journals (Sweden)

    Evans D.L.

    2013-05-01

    Full Text Available Measurements of diboson production cross sections in pp collisions at the LHC at a centre of mass energy √s = 7 and 8 TeV, and in pp̅ collisions at the Tevatron at √s = 1.96 TeV are reviewed and compared with standard model predictions. Limits on charged and neutral anomalous triple gauge couplings extracted from the selected diboson event samples are also compared.

  15. Research trends in radiobiology since 40 years. a new approach: the enzymatic repair function of DNA, internal factor in evolution of biological systems under irradiation; Etude des tendances des recherches en radiologie depuis 40 ans. Une nouvelle voie de recherche: la fonction de reparation enzymatique de l'ADN, facteur interne d'evolution des systemes biologiques sous rayonnement

    Energy Technology Data Exchange (ETDEWEB)

    Mouton, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    . Il y a moins d'une generation, l'on croyait encore que les effets des rayonnements sur les systemes vivants etaient des effets directs, immediats, irreparables et definitifs. Depuis lors, on s'est rendu compte que les radiolesions pouvaient resulter d'effets indirects, etre tardives, reparables, et le plus souvent modifiables par des traitements chimiques ou biochimiques ad hoc. Cependant, la percee decisive en radiobiologie se situe entre 1962 et 1964, avec la decouverte que la cellule possede un mecanisme de defense active vis-a-vis de tout ce qui peut porter atteinte a l'integrite du patrimoine genetique inscrit dans la structure meme de l'ADN. L'existence d'une quatrieme fonction de l'ADN, celle d'auto-reparation, par voie enzymatique sous controle genetique, apporte enfin a la radiobiologie la base biologique moleculaire qui lui manquait pour sortir de la nuit 'phenomenologique' ou elle s'etait enfoncee apres l'abandon de la generalisation de la theorie de Lea, faute de preuve experimentale. Dans la seconde partie, cette fois prospective, de l'etude l'auteur tente une synthese elargie en considerant le role que peut jouer cette fonction de reparation de l'ADN non seulement du point de vue de la survie des systemes biologiques irradies en presence ou non d'agents modificateurs de dose ou mutagenes, mais aussi de celui de l'evolution naturelle ou artificielle de ces systemes sous rayonnement. Les donnees les plus recentes de la litterature sont en accord avec ce qui ne constitue encore qu'une hypothese generale de recherche. Des travaux portant sur les caracteres phenotypiques et genotypiques lies a l'acquisition de radioresistance gamma et UV, chez 'Escherichia coli K12', ont ete entrepris par l'auteur, en collaboration avec O. Tremeau en vue d'apporter une contribution experimentale nouvelle a cet egard. (auteur)

  16. Product design - Molecules, devices, functional products, and formulated products

    DEFF Research Database (Denmark)

    Gani, Rafiqul; Ng, Ka M.

    2015-01-01

    Chemical product design is a multidisciplinary and diverse subject. This article provides an overview of product design while focusing on product conceptualization. Four product types are considered - molecular products, formulated products, devices and functional products. For molecular products......, computer-aided design tools are used to predict the physicochemical properties of single molecules and blends. For formulated products, an integrated experiment-modeling approach is used to generate the formula with the specified product attributes. For devices and functional products, conceptual product...... design is carried out by modeling the product based on thermodynamics, kinetics and transport processes, by performing experiments, and by decision making based on rule-based methods The results are product specifications in terms of the type of ingredients, composition, and the structure, form, shape...

  17. Sous type rare du cancer de prostate: Le carcinome sarcomatoide

    African Journals Online (AJOL)

    A. Qarro

    est essentiellement chirurgical qui peut aller de la simple résection de la prostate jusqu'à l'exentération pelvienne associée ou non à la chimiothérapie ou à la radiothérapie. Le pronostic est très mauvais avec 20% de risque de décès la première année qui suit le diagnostic. Nous rapportons une observation d'un patient.

  18. Echanges thermiques dans un four à combustible eau sous ...

    African Journals Online (AJOL)

    Belonging to the class of the diffusive phenomena, these thermal transfers were explained using mathematical techniques among which transformations of Fourier and Laplace.. Concurrently to these theoretical aspects, the phenomena of transfers of heat intervene in an eminent way in the industrial activities and the life of ...

  19. Le CERN sous haute sécurité

    CERN Multimedia

    Scappaticci, Bruno

    2008-01-01

    1500 prestigious guests came to participate to the LHC inauguration on last Tuedday, among which the Swiss President and the French Prime Minister François Fillon. Picked unities of the polices (Swiss an French) were on a war-footing.. (2 pages)

  20. Les agendas 21 locaux : quels apports sous quelles latitudes ?

    Directory of Open Access Journals (Sweden)

    Cyria Emelianoff

    2005-05-01

    Full Text Available Since the Rio conference, several thousands local agendas 21 have assisted the penetration of the concept of sustainable development at the local level. This article presents a synthesis of the approaches employed by local authorities in 9 European countries, with an emphasis on the benefits and limitations presented by the local agendas 21 in place. We characterised the specificities of French local authorities and determined the geographical dimensions of the mobilisation in favour of local agendas 21.

  1. De vieilles obsessions sous des habits neufs ?

    Directory of Open Access Journals (Sweden)

    Louis Quéré

    2011-10-01

    Full Text Available Cet article fait le tri dans le texte de Laurence Kaufmann et Laurent Cordonier entre ce qui paraît et ce qui ne paraît pas plausible dans leurs conjectures. Il spécifie à quelles conditions on peut admettre l'hypothèse du « cerveau social ». Il est par contre plus critique à l'égard de l'idée d'une « régulation neuroendocrinienne du lien social ». L'argument est que les auteurs n'estiment pas correctement les possibilités et les limites des explications neuroscientifiques des conduites humaines et des relations sociales. Enfin l'article confronte la forme de naturalisme social défendue par les auteurs à celle de la tradition pragmatiste (John Dewey et George Herbert Mead et s'appuie sur la seconde pour faire ressortir le caractère problématique de la première.A new look for old obsessions?This paper tries to sift out the plausible in what Laurence Kaufmann and Laurent Cordonier tell in their article. It specifies some conditions for the acceptation of their surmise about the « social brain ». It criticizes much more their speculations about a « neuroendocrinous regulation of the social bond ». It argues that the authors don't estimate properly the capacities and the limits of the neuroscientific explanations of human conduct and social relations. Finally, it compares the version of social naturalism assumed by the authors with the pragmatist tradition's one (John Dewey and George Herbert Mead and uses this last to show the problematic character of the first.¿Nuevas apariencias de añejas obsesiones?El autor pasa por la criba el texto de Laurence Kaufman y Laurent Cordonier y distingue entre lo que parece plausible y lo que no lo es. Específica bajo qué condiciones puede admitirse la hipótesis de un « cerebro social ». Es mucho más crítico con respecto a la « regulación neuro-endocrina de los lazos sociales ». Estos autores no analizan correctamente las posibilidades y los límites de las explicaciones neuro-científicas del comportamiento humano y de las relaciones sociales. El autor también confronta la forma de naturalismo social defendida por los autores con la de la tradición pragmatista (John Dewey y George Herbert Mead apoyándose en este último para resaltar el carácter problemático de la primera.

  2. Les formes psychiatriques des hematomes sous-duraux chroniques ...

    African Journals Online (AJOL)

    Methods: This was a retrospective study of 26 cases of chronic subdural hematoma with psychiatric disorders admitted in neurology, neurosurgery and psychiatry of Hôpital Général de Grand Yoff and Fann's CHU of Dakar (Senegal) between 2001 in 2009. Results: The mean age of patients was 80.6 years. No patient had a ...

  3. Les objets sous contrainte. Gages, saisies, confiscation, vol, pillage, recel…

    Directory of Open Access Journals (Sweden)

    Laurent Feller

    2009-09-01

    Full Text Available Cette table ronde s’inscrit dans le cadre d’une réflexion menée sur la valeur des choses au Moyen Âge, c’est-à-dire sur les conditions empiriques et théoriques de l’évaluation ; un groupe de travail conjoint du LAMOP (UMR 8589, Paris 1-CNRS et du CSIC de Madrid organise une série de tables rondes. La première s’est tenue à Madrid en novembre 2008 et a eu comme thème : « Circulation et remploi des objets au Moyen Âge ».Les objets circulent parfois malgré la volonté de leurs propriétaires, en ...

  4. Carcinome adenoide kystique sous-glottique | Gassab | Journal ...

    African Journals Online (AJOL)

    Case report: A 75-year-old man, presented with a laryngeal dyspnea. The computed tomography of the larynx showed a posterior subglottic tumor. The panendoscopy revealed a large nonulcerated submucosal tumor in the posterior wall of the subglottic area. Biopsies made the diagnosis of laryngeal ACC. The patient had ...

  5. Pia Petersen sous le signe de don Quichotte

    Directory of Open Access Journals (Sweden)

    Esther Bautista Naranjo

    2013-04-01

    Full Text Available This interview has been motivated by the Cervantean intertextuality of Pia Petersen’s (a French-speaking Danish author last novel, Le Chien de don Quichotte (2012. Departing from the values that the writer attributes to Cervantes’ work, I try to establish a connection with a specific critical trend in order to test, later on, to which extent this approach is used by the author to create a series of characters placed under the sign of don Quixote. Finally, I evaluate her novel’s relation with contemporary reality.

  6. Irradiation damage 'displacement zone'; Dommages sous irradiation zone de deplacements

    Energy Technology Data Exchange (ETDEWEB)

    Genthon, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    It is well known that a charged particle (ion, primary atom, etc...) moving in a solid slows down and can cause a cascade of displacements of the atoms in the solid. A study is made here of the extent to which the cascade is made up, or not, of independent collisions, as a function of the energy of the initial charged particle. When the distance between the collisions is small, these latter are no longer independent; the cascade, which then has to be considered as a whole, perturbs and locates, in the irradiated solid , a zone which has been named a 'displacement zone'. It is shown that the proportion of displacement zones increases with increasing atom size (high atomic number Z), with decreasing atomic distance D in the substance considered and with decreasing energy of the ion undergoing the slowing down process (although always remaining above a few hundred eV). The proportions obtained are higher than those corresponding to the calculations of J. A. Brinkman [3]. An interatomic potential required for this work has also been determined. (author) [French] On sait qu'une particule chargee (ions, atomes primaires, etc...) en mouvement dans un solide se ralentit, avec eventuellement deplacement en cascade d'atomes du solide. On etudie ici dans quelle proportion, en fonction de l'energie de la particule chargee initiale, la cascade est constituee, ou non, de 'chocs independants'. Lorsque la distance entre chocs est petite, ceux-ci ne sont plus independants; la cascade, qui doit alors etre consideree dans son ensemble, perturbe et definit dans le solide irradie, une zone qu'on a appele zone de deplacements. On montre que la proportion de zones de deplacements est d'autant plus grande que les atomes sont gros (nombre atomique Z grand), que la distance interatomique D est petite dans le corps considere, et que l'energie de l'ion en ralentissement est petite (tout en restant superieure a quelques centaines d'eV). Les proportions obtenues sont superieures a celles qui correspondraient aux calculs de J. A. BRINKMAN [3], On determine d'autre part un potentiel interatomique, necessaire a cette etude. (auteur)

  7. Emissions under reinforced supervision; Des emissions sous surveillance renforcee

    Energy Technology Data Exchange (ETDEWEB)

    Remoue, A

    2009-11-15

    Despite some enforcement difficulties, the Integrated Pollution Prevention and Control (IPPC) European directive on the integrated approach of pollution is going to harden. The new version, which will be presented on second lecture at the Parliament in the beginning of 2010 will oblige industries to opt for the best available technologies. In Europe, 55000 sites are concerned by the IPPC directive, among which 6760 are in France. Today, about 1650 French sites are not in order with this directive. (J.S.)

  8. New Product

    Institute of Scientific and Technical Information of China (English)

    铭瑄

    2012-01-01

    Double Coin Holdings Launch New OTR Tire REM-15 With the increase of the demand for large-scale bulldozer in American market, Double Coin Group Co., Ltd. developed the Double Coin REM-15 OTR tire. This product is applicable for large-scale loader and bulldozer. The most remarkable characteristic is that it has good energy-saving performance and durability with low operating cost while the performances of tires aren't lowered. The new REM-15 is currently offered in the 17.5R25 size, which will be expanded to larger sizes in the future.

  9. production lines

    Directory of Open Access Journals (Sweden)

    Jingshan Li

    2000-01-01

    Full Text Available In this work, serial production lines with finished goods buffers operating in the pull regime are considered. The machines are assumed to obey Bernoulli reliability model. The problem of satisfying customers demand is addressed. The level of demand satisfaction is quantified by the due-time performance (DTP, which is defined as the probability to ship to the customer a required number of parts during a fixed time interval. Within this scenario, the definitions of DTP bottlenecks are introduced and a method for their identification is developed.

  10. Concentration of Umami Compounds in Pork Meat and Cooking Juice with Different Cooking Times and Temperatures.

    Science.gov (United States)

    Rotola-Pukkila, Minna K; Pihlajaviita, Seija T; Kaimainen, Mika T; Hopia, Anu I

    2015-12-01

    This study examined the concentrations of umami compounds in pork loins cooked at 3 different temperatures and 3 different lengths of cooking times. The pork loins were cooked with the sous vide technique. The free amino acids (FAAs), glutamic acid and aspartic acid; the 5'-nucleotides, inosine-5'-monophosphate (IMP) and adenosine-5'-monophosphate (AMP); and corresponding nucleoside inosine of the cooked meat and its released juice were determined by high-performance liquid chromatography. Under the experimental conditions used, the cooking temperature played a more important role than the cooking time in the concentration of the analyzed compounds. The amino acid concentrations in the meat did not remain constant under these experimental conditions. The most notable effect observed was that of the cooking temperature and the higher amino acid concentrations in the released juice of meat cooked at 80 °C compared with 60 and 70 °C. This is most likely due to the heat induced hydrolysis of proteins and peptides releasing water soluble FAAs from the meat into the cooking juice. In this experiment, the cooking time and temperature had no influence on the IMP concentrations observed. However, the AMP concentrations increased with the increasing temperature and time. This suggests that the choice of time and temperature in sous vide cooking affects the nucleotide concentration of pork meat. The Sous vide technique proved to be a good technique to preserve the cooking juice and the results presented here show that cooking juice is rich in umami compounds, which can be used to provide a savory or brothy taste. © 2015 Institute of Food Technologists®

  11. Propagation of an ultra intense laser pulse in an under dense plasma: production of quasi monoenergetic electron beams and development of applications; Propagation d'une impulsion laser ultra-intense dans un plasma sous-dense: generation de faisceaux d'electrons quasi monoenergetiques et developpement d'applications

    Energy Technology Data Exchange (ETDEWEB)

    Glinec, Y

    2006-09-15

    This experimental study concerns the generation of electron beams with original properties. These electrons beams originate from the interaction of an ultra-intense and short laser pulse with a gas jet. Previously, these electron beams had a large divergence and a broad spectrum. A major improvement in this field was achieved when an electron beam with low divergence (10 mrad) and a peaked spectrum (170 MeV) was observed during this thesis, using a new single shot electron spectrometer. A parametric study of the interaction allowed to observe the evolution of the electron beam. Experiments have been carried out to deepen the characterization of the electron beam. The observation of transition radiation generated by the electrons at an interface shows that the electron beam interacts with the laser pulse during the acceleration. Radial oscillations of the electron beam around the laser axis, named betatron oscillations, were also observed on the electron spectra. Such a quasi-monoenergetic spectrum is essential for many applications. In order to justify the interest of this electron beam, several applications are presented: a sub-milli-metric gamma-ray radiography of dense objects, a dose profile of the electron beam comparable to present capabilities of photon sources for radiotherapy, a very short temporal profile useful for water radiolysis and the generation of a bright X-ray source with low divergence. (author)

  12. Propagation of an ultra intense laser pulse in an under dense plasma: production of quasi monoenergetic electron beams and development of applications; Propagation d'une impulsion laser ultra-intense dans un plasma sous-dense: generation de faisceaux d'electrons quasi monoenergetiques et developpement d'applications

    Energy Technology Data Exchange (ETDEWEB)

    Glinec, Y

    2006-09-15

    This experimental study concerns the generation of electron beams with original properties. These electrons beams originate from the interaction of an ultra-intense and short laser pulse with a gas jet. Previously, these electron beams had a large divergence and a broad spectrum. A major improvement in this field was achieved when an electron beam with low divergence (10 mrad) and a peaked spectrum (170 MeV) was observed during this thesis, using a new single shot electron spectrometer. A parametric study of the interaction allowed to observe the evolution of the electron beam. Experiments have been carried out to deepen the characterization of the electron beam. The observation of transition radiation generated by the electrons at an interface shows that the electron beam interacts with the laser pulse during the acceleration. Radial oscillations of the electron beam around the laser axis, named betatron oscillations, were also observed on the electron spectra. Such a quasi-monoenergetic spectrum is essential for many applications. In order to justify the interest of this electron beam, several applications are presented: a sub-milli-metric gamma-ray radiography of dense objects, a dose profile of the electron beam comparable to present capabilities of photon sources for radiotherapy, a very short temporal profile useful for water radiolysis and the generation of a bright X-ray source with low divergence. (author)

  13. Fate of pathogens and micro-pollutants during organic wastes and by-products anaerobic digestion - a review; Etat des connaissances sur le devenir des germes pathogenes et des micropolluants au cours de la methanisation des dechets et sous-produits organiques

    Energy Technology Data Exchange (ETDEWEB)

    Couturier, Ch.; Galtier, L.

    1998-09-01

    Based on 300 scientific papers, the following bibliographical research deals with the fate of micro-pollutants (pathogens, heavy metals, organic pollutants) during anaerobic digestion. Different biological and chemical mechanisms allow organic compounds elimination, except from some Polycyclic Aromatic Hydrocarbons (PAHs) and heavy metals which are fixed to the solid biomass, permitting water contamination risks attenuation. Unlike mesophilic digestion, thermophilic digestion is a 'sanitation' process regarding pathogens elimination. However, mesophilic digestion offers an important reliability compared with competitive or complementary processes. In particular, energy recovery from anaerobic digestion allows temperature control and makes easier further sanitation heat treatments. In general, anaerobic digestion represents a tool which can be included in an organic waste treatment line assuming waste selection and good agricultural practices. Otherwise, sanitation problem is still badly handled by waste operators and constructors which have been consulted. Research orientations seem especially interesting in improving knowledge of real industrial processes performances. (author)

  14. Fate of pathogens and micro-pollutants during organic wastes and by-products anaerobic digestion - a review; Etat des connaissances sur le devenir des germes pathogenes et des micropolluants au cours de la methanisation des dechets et sous-produits organiques

    Energy Technology Data Exchange (ETDEWEB)

    Couturier, Ch; Galtier, L

    1998-09-01

    Based on 300 scientific papers, the following bibliographical research deals with the fate of micro-pollutants (pathogens, heavy metals, organic pollutants) during anaerobic digestion. Different biological and chemical mechanisms allow organic compounds elimination, except from some Polycyclic Aromatic Hydrocarbons (PAHs) and heavy metals which are fixed to the solid biomass, permitting water contamination risks attenuation. Unlike mesophilic digestion, thermophilic digestion is a 'sanitation' process regarding pathogens elimination. However, mesophilic digestion offers an important reliability compared with competitive or complementary processes. In particular, energy recovery from anaerobic digestion allows temperature control and makes easier further sanitation heat treatments. In general, anaerobic digestion represents a tool which can be included in an organic waste treatment line assuming waste selection and good agricultural practices. Otherwise, sanitation problem is still badly handled by waste operators and constructors which have been consulted. Research orientations seem especially interesting in improving knowledge of real industrial processes performances. (author)

  15. Bottom Production

    CERN Document Server

    Nason, P.; Schneider, O.; Tartarelli, G.F.; Vikas, P.; Baines, J.; Baranov, S.P.; Bartalini, P.; Bay, A.; Bouhova, E.; Cacciari, M.; Caner, A.; Coadou, Y.; Corti, G.; Damet, J.; Dell'Orso, R.; De Mello Neto, J.R.T.; Domenech, J.L.; Drollinger, V.; Eerola, P.; Ellis, N.; Epp, B.; Frixione, S.; Gadomski, S.; Gavrilenko, I.; Gennai, S.; George, S.; Ghete, V.M.; Guy, L.; Hasegawa, Y.; Iengo, P.; Jacholkowska, A.; Jones, R.; Kharchilava, A.; Kneringer, E.; Koppenburg, P.; Korsmo, H.; Kramer, M.; Labanca, N.; Lehto, M.; Maltoni, F.; Mangano, Michelangelo L.; Mele, S.; Nairz, A.M.; Nakada, T.; Nikitin, N.; Nisati, A.; Norrbin, E.; Palla, F.; Rizatdinova, F.; Robins, S.; Rousseau, D.; Sanchis-Lozano, M.A.; Shapiro, M.; Sherwood, P.; Smirnova, L.; Smizanska, M.; Starodumov, A.; Stepanov, N.; Vogt, R.

    2000-01-01

    We review the prospects for bottom production physics at the LHC. Members of the working group who has contributed to this document are: J. Baines, S.P. Baranov, P. Bartalini, A. Bay, E. Bouhova, M. Cacciari, A. Caner, Y. Coadou, G. Corti, J. Damet, R. Dell'Orso, J.R.T. De Mello Neto, J.L. Domenech, V. Drollinger, P. Eerola, N. Ellis, B. Epp, S. Frixione, S. Gadomski, I. Gavrilenko, S. Gennai, S. George, V.M. Ghete, L. Guy, Y. Hasegawa, P. Iengo, A. Jacholkowska, R. Jones, A. Kharchilava, E. Kneringer, P. Koppenburg, H. Korsmo, M. Kraemer, N. Labanca, M. Lehto, F. Maltoni, M.L. Mangano, S. Mele, A.M. Nairz, T. Nakada, N. Nikitin, A. Nisati, E. Norrbin, F. Palla, F. Rizatdinova, S. Robins, D. Rousseau, M.A. Sanchis-Lozano, M. Shapiro, P. Sherwood, L. Smirnova, M. Smizanska, A. Starodumov, N. Stepanov, R. Vogt

  16. ELABORATION ET ETUDE DES MATERIAUX CHALCOPYRITES AIBIIIC2 IV : LE DISELINURE DE CUIVRE ET D’INDIUM

    Directory of Open Access Journals (Sweden)

    S MEHDAOUI

    2007-06-01

    par évaporation sur des substrats en verre présentent des coefficients d’absorption ( élevées de l’ordre de 5.104 cm-1. Le tracé de la fonction (h2 des couches minces recuites sous vide à différentes températures en fonction de l’énergie des photons incident a mis en relief la nature directe de la transition fondamentale est a permis également de calculer le gap Eg = 1.04 eV.

  17. Production management (1976)

    International Nuclear Information System (INIS)

    Lee, Sun Ryong

    1976-03-01

    This book introduces production management theory, which gives descriptions of production and system, systems approach, development of production management, Taylor system, Ford system, types of production system, measuring ingredients model of production management, decision of production management, selection of production facilities, arrangement of facilities design of work method and task, work measure system, demanding fore casting, production quality system and credibility system.

  18. Carcinogenesis by Fast Neutrons Relative to X-Rays in Mice; Carcinogenese chez les Souris sous l'Effet des Neutrons Rapides et des Rayons X; Sravnitel'naya chastota vozniknoveniya rakovykh opukholej u myshej pri obluchenii bystrymi nejtronami i rentgenovskimi luchami; Accion Carcinogenica Comparada de los Neutrones Rapidos y de los Rayos X en el Raton

    Energy Technology Data Exchange (ETDEWEB)

    Cole, L. J.; Nowell, P. C. [Division of Biological and Medical Sciences, U.S. Naval Radiological Defense Laboratory, San Francisco, CA (United States); Department of Pathology, School of Medicine, University of Pennsylvania, Philadelphia, PA (United States)

    1964-05-15

    ). Parmi les souris du Groupe I, sacrifiees 12 a 16 mois apres l'exposition, 75% presentaient des hepatomes; ce taux atteignait 92% chez les souris du Groupe II. Par contre, des tumeurs du foie se sont produites chez 14% des souris exposees seulement aux neutrons (Groupe V) et chez 2,4% des souris exposees a une dose unique (500 rad) de rayons X de 250 kVcrete. On a observe des neoplasmes du rein chez pres de 100% des souris du Groupe IV, alors que ces lesions ont ete peu frequentes chez les souris temoins. Les auteurs etudient Inverted-Exclamation-Mark ' induction de ces neoplasmes sous l'effet de l'exposition aux neutrons et leur developpement sous l'action des agent employes pour stimuler la proliferation. En ce qui concerne l'induction de neoplasmes du rein chez les souris, les donnees indiquent un coefficient de puissance d'environ 2 pour les neutrons de fission par rapport aux rayons X de 250 kV-crete. Pour ce qui est de l'apparition de lymphomes dans cette lignee, leur frequence a ete moins importante chez les souris exposees aux neutrons (11%) que chez les sujets exposes aux rayons X (29%). (author) [Spanish] Los autores sometieron ratones jovenes adultos de la variedad LAF a una exposicion subletal unica a neutrones de fision, tratandolos de la siguiente forma: Grupo I: 195 a 199 rad, seguida de una sola inyeccion subcutanea de CCl{sub 4}, un mes despues de la exposicion; Grupo II: inyeccion de CCl{sub 4} aplicada un dia antes de la irradiacion neutronica (280 y 329 rad); Grupo III: inyeccion de CCl{sub 4} sin irradiacion; Gmpo IV: nefrectomfa unilateral un dia antes de la irradiacion (320 y 328 rad); Grupo V: irradiacion neutronica exclusivamente (200 y 320 rad). Al sacrificar los sujetos entre 12 y 16 meses a contar de la irradiacion, se encontraron hepatomas en el 75% de los ratones del Grupo I y en el 92% de los del Grupo II. En cambio, los tumores hepaticos aparecieron en el 14% de los ratones que solo fueron irradiados (Grupo V) y en el 2,4% de los expuestos

  19. From Product Models to Product State Models

    DEFF Research Database (Denmark)

    Larsen, Michael Holm

    1999-01-01

    A well-known technology designed to handle product data is Product Models. Product Models are in their current form not able to handle all types of product state information. Hence, the concept of a Product State Model (PSM) is proposed. The PSM and in particular how to model a PSM is the Research...

  20. Extrusion and drawing of zircaloy 2. Production of pressure tubes for EL-4; Filage et etirage du zircaloy 2. Realisation des tubes de force pour EL-4

    Energy Technology Data Exchange (ETDEWEB)

    Thevenet, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Buffet, J [Cefilac (France)

    1964-07-01

    The authors give briefly the physical mechanical and chemical properties of zircaloy 2, as far as the transformation of this alloy is concerned. Extrusion: After a few general remarks concerning the extrusion and co-extrusion, including a comparison of the deformation resistance of canning metals and of zircaloy 2, the following points are considered: - the difficulties occurring because of the use of this alloy: - atmosphere protection - adjustment on to the machine tools - low thermal conductivity - economy of the metal (price) - the factors affecting the quality of the extruded products extrusion under a copper can and under lubricant glass - fine grain structure - temperature homogeneity - working temperature The transformation cycle - '550 kg ingot - preliminary shape 'for drawing of EL-4 tubes (112 x 120 L 12 m)' - is described in detail (extrusion or forging of the {phi} = 340 ingot into {phi} = 220 billets, cutting into lengths and hot drilling at {phi} = 125, fixing into a copper can and rough extrusion). Drawing: The main difficulties are due to seizing of the tools and to the necessity of protecting the alloy from the atmosphere during annealings. A brief description is given of drawing out on a short mandrel, on a long mandrel, of laminating on a reducing machine and of the carrying out of an annealing, as well as of the production of EL-4 tubes ({phi} =107 x 113 L 430 m) by drawing out shapes having a size of 112 x 120 on long mandrels. Conclusion: It is possible by extrusion and drawing to produce zircaloy 2 tubes similar to those which may be obtained normally using stainless steel. (authors) [French] Les auteurs donnent un resume succint des proprietes physiques mecaniques et chimiques du zircaloy 2 en ce qui concerne la transformation de cet alliage. Filage: Apres quelques generalites sur le filage et le cofilage, dont une comparaison entre les resistances a la deformation des metaux de gainage et du zircaloy 2, on etudie successivement: - les

  1. Tobacco Products Production and Operations Reports

    Data.gov (United States)

    Department of the Treasury — Monthly statistical reports on tobacco products production and operations. Data for Tobacco Statistical Release is derived directly from the Report – Manufacturer of...

  2. Checking the sealing of fuel elements by helium sweating - case of the reactors G2 (1960); Controle de l'etancheite des elements combustibles par ressuage d'helium - cas du reacteur G2 (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, B; D' Orival, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Choumoff, S [Compagnie Francaise Thomson-Houston, 75 - Paris (France)

    1960-07-01

    The G2 slug is a welded, hermetically sealed unit; the seal is checked by placing the fuel element in a helium atmosphere under pressure, then measuring the quantity of helium it releases in a vessel under vacuum. The theoretical aspect and the conditions of industrial application are reviewed, and the installations described. (author) [French] La cartouche G2 se presente comme un ensemble soude, hermetique; le controle d'etancheite s'effectue en immergeant l'element combustible dans une atmosphere d'helium sous pression puis en mesurant la quantite d'helium qu'il restitue dans une enceinte sous vide. L'aspect theorique et les conditions d'exploitation industrielle sont evoques et les installations decrites. (auteur)

  3. Innovation in Product Development

    DEFF Research Database (Denmark)

    McAloone, Tim C.; Restrepo-Giraldo, John Dairo

    2005-01-01

    The course on Innovation in Product Development attempts to identify and understand the nature of innovation and product development and their important factors. The course takes both a theoretical and a practical approach and employs a mix of lectures, project work and group discussion. Format...... insight. Course content The following aspects of innovation in product development are considered: - Humans and products - Needs and products - Product life - Teams creating products - Products creating business - Product development models - Organising product development - Product development tools...... - The future of product development....

  4. Production and study of high intensity discharges; Production et etude de decharges a forte intensite

    Energy Technology Data Exchange (ETDEWEB)

    Breton, C.; Charbon, J.; Hubert, P.; Vendryes, G.; Yvon, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    High intensity discharges have been induced in a pyrex toroid filled with argon or deuterium at low pressure. An attempt was made to stabilise the ring of plasma by the joint action of a metal screen and a longitudinal magnetic field. Penetrating X-ray have been observed under certain conditions. (author) [French] Des decharges a forte intensite ont ete induites dans une tore en pyrex rempli d'argon ou de deuterium sous basse pression. On a cherche a stabiliser l'anneau de plasma par l'action conjuguee d'un champ magnetique longitudinal. Un rayon X penetrant a ete observe dans certaines conditions. (auteur)

  5. Production and study of high intensity discharges; Production et etude de decharges a forte intensite

    Energy Technology Data Exchange (ETDEWEB)

    Breton, C; Charbon, J; Hubert, P; Vendryes, G; Yvon, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    High intensity discharges have been induced in a pyrex toroid filled with argon or deuterium at low pressure. An attempt was made to stabilise the ring of plasma by the joint action of a metal screen and a longitudinal magnetic field. Penetrating X-ray have been observed under certain conditions. (author) [French] Des decharges a forte intensite ont ete induites dans une tore en pyrex rempli d'argon ou de deuterium sous basse pression. On a cherche a stabiliser l'anneau de plasma par l'action conjuguee d'un champ magnetique longitudinal. Un rayon X penetrant a ete observe dans certaines conditions. (auteur)

  6. SaferProducts API

    Data.gov (United States)

    US Consumer Product Safety Commission — On March 11, 2011, the U.S. Consumer Product Safety Commission launched SaferProducts.gov. This site hosts the agency's new Publicly Available Consumer Product...

  7. Radiation processing for safe, shelf-stable and ready-to-eat food. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    2003-01-01

    The increasingly busy lifestyles of populations in many countries have driven the demand for safe, convenient and ready-to-eat food. Traditional food processes such as drying, canning or refrigeration offer a partial solution to this demand as the sensory quality of such food may be significantly affected or the products may be contaminated by pathogenic bacteria during preparation. For developing countries, safe shelf-stable food without the need for refrigeration would offer advantages. In addition, the increasing number of immuno-compromised populations in many countries requires a new approach to food safety to meet their needs. Irradiation offers a potential to enhance microbiological safety and quality of food through shelf-life extension. The benefits of irradiation as a sanitary treatment of many types of food are well known, some of which are applied commercially in several countries. Little data were available, however, on the effect of irradiation on minimally processed food and composite food including prepared meals. A Co-ordinated Research Project (CRP) on the Development of Safe, Shelf-Stable and Ready-to-Eat Food through Radiation Processing therefore was implemented by the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture in 1996 to evaluate the role of irradiation for such food. The results were encouraging as irradiation offers promise as a sanitary treatment to ensure microbiological safety and shelf-life extension of several types of food products including pre-cut vegetables and some sous-vide meals, chilled ready-prepared meals, chilled ready-to-eat meat products, food for immuno-compromised patients/populations, sterile meals, ready-to-eat-food of intermediate moisture content. This publication presents the research results reported at the final Research Co-ordination meeting on this CRP held in Saint Hyacinthe, Quebec, Canada, 10-14 July 2000

  8. Radiation processing for safe, shelf-stable and ready-to-eat food. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-01-01

    The increasingly busy lifestyles of populations in many countries have driven the demand for safe, convenient and ready-to-eat food. Traditional food processes such as drying, canning or refrigeration offer a partial solution to this demand as the sensory quality of such food may be significantly affected or the products may be contaminated by pathogenic bacteria during preparation. For developing countries, safe shelf-stable food without the need for refrigeration would offer advantages. In addition, the increasing number of immuno-compromised populations in many countries requires a new approach to food safety to meet their needs. Irradiation offers a potential to enhance microbiological safety and quality of food through shelf-life extension. The benefits of irradiation as a sanitary treatment of many types of food are well known, some of which are applied commercially in several countries. Little data were available, however, on the effect of irradiation on minimally processed food and composite food including prepared meals. A Co-ordinated Research Project (CRP) on the Development of Safe, Shelf-Stable and Ready-to-Eat Food through Radiation Processing therefore was implemented by the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture in 1996 to evaluate the role of irradiation for such food. The results were encouraging as irradiation offers promise as a sanitary treatment to ensure microbiological safety and shelf-life extension of several types of food products including pre-cut vegetables and some sous-vide meals, chilled ready-prepared meals, chilled ready-to-eat meat products, food for immuno-compromised patients/populations, sterile meals, ready-to-eat-food of intermediate moisture content. This publication presents the research results reported at the final Research Co-ordination meeting on this CRP held in Saint Hyacinthe, Quebec, Canada, 10-14 July 2000.

  9. The Measurement of Reactivity In Multiregion Subcritical Systems by the Pulsed Neutron Technique; Mesure de la Reactivite dans les Systemes Sous-Critiques a Plusieurs Regions par la Methode des Neutrons Pulses; Izmerenie reaktivnosti v mnogozonnykh podkriticheskikh sistemakh metodom impul'snykh nejtronov; Mediciones de la Reactividad en Sistemas Subcriticos de Varias Regiones Mediante la Tecnica de los Neutrones Pulsados

    Energy Technology Data Exchange (ETDEWEB)

    Sherwin, J.; Leng, J. H. [United Kingdom Atomic Energy Authority, Windscale Works, Cumberland (United Kingdom)

    1965-10-15

    The prompt decay of a thermalized burst of neutrons in a multiregion subcritical system is examined using a two-group diffusion theory. It is shown that a relationship can be established between the prompt decay constant of the fundamental mode and the effective multiplication factor of the system in terms of two parameters, defined, for the purposes of this paper, as the reactor response coefficient and the prompt decay correction and which depend to a large extent on the spatial flux patterns within the system. For the uniform bare system, the response coefficient can be identified with the mean neutron lifetime in the system; for a multiregion system it represents a compound of the lifetimes in each region weighted by perturbation type integrals. The second parameter, the decay correction, can have no physical meaning in that it arises from an attempt to relate the two scales of reactivity involved; that is the scale using the prompt decay constant and the scale derived using the effective multiplication factor. The properties of these parameters are examined here with reference to an enriched uranium graphitemoderated reactor consisting of uniform core and reflector and it is shown that the two parameters are not uniquely defined by the reactivity of the system but depend on the method chosen to make the system subcritical. Two sets of measurements are treated by the theory. In one, the Windscale Advanced Gas-Cooled Reactor was shut down by a uniform poison. In the other the reactivity of a core in the zero-energy reactor HERO was varied by altering the loaded radius. The neutron pulse measurements are all shown to be in good agreement with more conventional methods of reactivity determination. Some discussion of the experimental techniques and the difficulties encountered in the graphite-moderated systems is presented. (author) [French] Les auteurs etudient la decroissance des neutrons instantanes d'une bouffee thermalisee de neutrons dans un systeme sous

  10. Research with a Natural-Uranium Light-Water Subcritical Assembly; Recherches au Moyen d'un Ensemble Sous-Critique a Uranium Naturel et a Eau Ordinaire; Issledovaniya na podkriticheskoj sborke,rabotayushchej na prirodnom urane i obychnoj vode; Investigaciones con un Conjunto Subcritico de Uranio Natural y Agua Ligera

    Energy Technology Data Exchange (ETDEWEB)

    Koskinen, H. [Institute of Technical Physics, Otaniemi (Finland)

    1964-02-15

    systematic study of non-uniform lattices. In the future, enriched elements will be included in the assembly. Then systematic study of mixed lattices becomes possible, and also research with other non-uniformities will be easier because of the higher flux. Some discussion of this future programme is included in this paper. (author) [French] L'auteur relate les recherches effectuees avec un ensemble uranium naturel-eau ordinaire et enumere certains des sujets qui feront l'objet d'un prochain programme. La plus grande partie de la documentation est nouvelle. Certaines donnees ont encore un caractere provisoire, car les experiences et l'analyse des resultats se poursuivent. . Les travaux sont axes sur deux objectifs principaux: 1. Etude experimentale de la validite des methodes de calcul que l'on se propose d'utiliser, notamment en cas de geometries speciales (repartitions non uniformes du combustible, configurations de s'ous- ensembles, limites de forme particuliere, etc.). Les etudes theoriques conduisent souvent ici a certaines difficultes de convergence. Il faut donc les comparer avec les repartitions du flux mesurees. 2. Etude des proprietes particulieres des reseaux uranium naturel-eau ordinaire et notamment de la validite des modeles de ralentissement a plusieurs groupes pour des structures de coeur uniformes et non uniformes. On pense qu'un ensemble comportant une seule source de fission spontanee convient particulierement pour les recherches de ce genre, bien que la statistique ne porte que sur un petit nombre d'observations. Cela est du a deux faits: 1. On peut considerer que le spectre de la source primaire est identique a celui de la fission induite, si bien qu'il n'y a pas d'oscillations transitoires d'energie, comme dans le cas d'une source ponctuelle de neutrons rapides. 2. L'intensite de la source primaire en chaque point de l'espace est proportionnelle a la section efficace de fission du combustible lorsqu'on considere egalement cette derniere comme une fonction

  11. Product and labour market regulations, production prices, wages and productivity

    NARCIS (Netherlands)

    Cette, G.; Lopez, J.; Mairesse, J.

    2015-01-01

    This study is an attempt to evaluate the effects of product and labour market regulations on industry productivity through their various impacts on changes in production prices and wages. In a first stage, the estimation of a regression equation on an industry*country panel, with controls for

  12. Production management (2000)

    International Nuclear Information System (INIS)

    Jung, Chung Yeong

    2000-08-01

    This book includes basic concept of production management, production system, strategy and mission of production, decision of production management, operation of decision making, life cycle of items and development, value of productions, design for reliability of productions, equipment layout and manufacturing process, quantitative forecast, schedule plan, inventory system, concept, input and output of MRP, Montekalo simulation, quality management, and automation system.

  13. Product Service Systems

    DEFF Research Database (Denmark)

    Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems......Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems...

  14. Original Paper Typologie et rentabilité des systèmes de production ...

    African Journals Online (AJOL)

    d'affaire du secteur primaire après les produits avicoles avec 9,7% .... Les autres dépenses (eau, soins ... (Enseignement général) sous des formes et à ...... bovins laitiers en zone montagneuse d'Algérie. Revue d'Elevage et de. Médecine.

  15. Droša interneta vide bērniem publiskajās bibliotēkās

    OpenAIRE

    Gūte, Līga

    2011-01-01

    Internets mūsdienās ir viens no visvieglāk pieejamajiem masu saziņas, kā arī informācijas ieguves līdzekļiem. Tehnoloģijas ikdienā kļūst brīvi pieejamas mājās, skolās, arī bibliotēkās, līdz ar to ienākšanu arī bērnu ikdienā var rasties dažādi apdraudējumi, kas var būt saistīti ar dažāda veida vardarbību, kā arī citu negatīvu pieredzi. Palielinoties pusaudžu interesei par internetu, nākas saskarties ar dažādām problēmām, viena no lielākajām - kā nodrošināt atbilstošu interneta vidi bērniem ...

  16. CARVALHO, Olavo de. Maquiavel ou a confusão demoníaca. Campinas, SP: VIDE Editorial, 2011.

    Directory of Open Access Journals (Sweden)

    Gabriel Saldanha Lula de Medeiros

    2017-03-01

    Full Text Available Escritor e filósofo com mais de 35 anos de carreira, Olavo de Carvalho dedicou parte da sua obra a esmiuçar o trabalho de grandes filósofos, como é o caso dos livros “A Nova Era e a Revolução Cultural” (1994, onde tece críticas aos escritos de Antônio Gramsci e Fritjof Capra; “Uma Filosofia Aristotélica da Cultura” (1994; “Aristóteles em Nova Perspectiva” (1996; e talvez o mais famoso de seus livros, intitulado “O Jardim das Aflições” (1995, Olavo de Carvalho, em quase 500 páginas, analisa os trabalhos de Epicuro, Marx, Comte, Hegel e outros. Em 2011, escreveu um livro dedicado a análise da obra de Nicolau Maquiavel, com foco em sua obra mais popular, “O Príncipe”, escrita no século XVI, pois, para Carvalho, “dos pensadores modernos mais célebres, Maquiavel é talvez o primeiro a entregar ao público uma doutrina tão desencontrada e confusa” (CARVALHO, 2011, p. 19.

  17. Production monitoring system for understanding product robustness

    DEFF Research Database (Denmark)

    Boorla, Srinivasa Murthy; Howard, Thomas J.

    2016-01-01

    study is used to demonstrate how the monitoring system can be used to efficiently guide corrective action to improve product performance. It is claimed that the monitoring system can be used to dramatically cut the time taken to identify, planand execute corrective action related to typical quality......In the current quality paradigm, the performance of a product is kept within specification by ensuring that its parts are within specification. Product performance is then validated after final assembly. However, this does not control how robust the product performance is, i.e. how much...... it will vary between the specification limits. In this paper, a model for predicting product performance is proposed, taking into account design, assembly and process parameters live from production. This empowers production to maintain final product performance, instead of part quality. The PRECI‐IN case...

  18. Production de méthanol et d'alcools supérieurs à partir de gaz via (CO + H2 Production of Methanol and Higher Alcohols from Gas via (Co + H2

    Directory of Open Access Journals (Sweden)

    Kawata N.

    2006-11-01

    Full Text Available Dans le cadre des procédés en développement pour la synthèse d'alcools à partir de syngas (CO + H2, ce mémoire présente certains résultats récents de l'Institut Français du Pétrole (IFP (France et Idemitsu Kosan (Japon. La première démonstration du procédé, sous programme R et D du RAPAD-Japon, a confirmé les performances et la faisabilité. Les alcools sélectivement produits, après fractionnement, présentent de bonnes propriétés pour l'usage carburant. L'optimisation de l'ensemble constitué par la production du syngas, la synthèse, le fractionnement des alcools, a permis une simplification sensible du procédé, une optimisation spécifique des performances, ce qui conduit à des données économiques plus favorables. Within the framework of processes being developed for alcohol synthesis from syngas, this article describes some recent results obtained by Idemitsu-Kosan (Japan and Institut Français du Pétrole (IFP (France. The first demonstration of the process as part of the RAPAD-Japan R & D program has confirmed both its performances and feasibility. The alcohols selectively produced, after suitable fractionation, present good properties as a blend for motor fuels. The optimization of the overall process for syngas production, alcohol synthesis and alcohol fractionation has led to a significant simplification of the process and to the optimization of its performances, leading to better economics.

  19. Productivity and Performance Measurement

    DEFF Research Database (Denmark)

    Hald, Kim Sundtoft; Spring, Martin

    This study explores conceptually how performance measurement as discussed in the literature, enables or constrains the ability to manage and improve productivity. It uses an inter-disciplinary literature review to identify five areas of concern relating productivity accounting to the ability...... to improve productivity: “Productivity representation”; “productivity incentives”, “productivity intervention”; “productivity trade-off or synergy” and “productivity strategy and context”. The paper discusses these areas of concern and expands our knowledge of how productivity and performance measurement...

  20. Experiments on the incorporation of concentrated solutions of fission products in glasses and micas; Essais d'incorporation de solutions concentrees de produits de fission dans des verres et des micas

    Energy Technology Data Exchange (ETDEWEB)

    Bonniaud, R; Cohen, P; Sombret, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    1) The plants designed for extracting the plutonium of the G1, G2, G3 reactors fuel rods will produce extremely concentrated tions of fission products. 2) Let us consider a synthetic solution of the 'G2' type: (2N NO{sub 3}H - 2,25 meq/cm{sup 3} AI{sup +++} - 5.10{sup -3} {sup 134}Cs - {sup 137}Cs tracer). We made various glasses and micas by adding and mixing the necessary adjuvants and baking (900 to 1400 deg. C) in a graphite crucible. 3) The products obtained had either the shape of a cylindrical pellet or were reduced into a fine powder. They were mixed with 300 cm{sup 3} of synthetic sea water during variable periods of time in order to study leaching of the activity. 4) Experiments were first carried on caesium because of its solubility. 5) Fabrication of micas on a large scale sets many technological problems more difficult to solve (1400 deg. C) than in the case of glasses (1000 deg. C). A comparative study on both micas and glasses showed that leaching of activity was more important in the micas. (author)Fren. [French] 1) La mise en service de l'Usine d'Extraction du Plutonium destinee en particulier au traitement des barres de combustibles de G1, G2, G3 fournira des solutions residuaires concentrees de produits de fission. 2) Partant d'une solution synthetique 'G2': (2N NO{sub 3}H - 2,25meq/cm{sup 3} AI{sup +++} - 5.10{sup -3} {sup 134}Cs - {sup 137}Cs traceur) nous avens realise differents verres et micas apres adduction et melange des adjuvants necessaires suivis de cuisson (900 a 1400 deg. C) dans un creuset de graphite. 3) Les produits obtenus ont ete, soit sous forme d'eprouvette cylindrique, soit sous forme de poudre finement broyee, mis en contact et agites avec 300 cm{sup 3} d'eau de mer synthetique, durant des temps varies pour etudier la retention de l'activite. 4) Le cesium a ete choisi pour ces essais a cause de sa solubilite. 5) La fabrication de micas a grande echelle pose des problemes technologiques plus difficiles (1400 deg. C) a

  1. La fonction logistique, un outil performant d'analyse et de prévision à moyen terme. Application à la production de pétrole et de gaz aux Etats-Unis, en URSS et dans d'autres pays The Logistic Function, an Efficient Medium-Range Analysis and Forecasting Method

    Directory of Open Access Journals (Sweden)

    Seguret J.

    2006-11-01

    Full Text Available A partir de la similitude observée entre l'évolution de la production pétrolière d'un pays et celle de la pénétration d'un produit dans un marché (fonction logistique, l'auteur expose le principe d'une méthode originale qui permet, sous certaines conditions, de prévoir quelle sera la production annuelle probable d'un pays producteur à un horizon de 10 à 15 ans. La validité de cette méthode est d'abord démontrée sur l'exemple de la production pétrolière aux Etats-Unis. Elle est ensuite illustrée par les résultats obtenus pour un certain nombre de pays : production future de gaz aux Etats-Unis, production pétrolière future du Canada, de l'URSS, du Venezuela et de l'ensemble du monde hors Moyen-Orient. On the basis of the similarity observed between the variation in the petroleum production of a country and that of the penetration of a product into the market (logistic function, this article describes the principle of an original method that can be used, under certain conditions, to forecast the probable annual production of a producing country in 10 to 15 years. The validity of this method is first demonstrated for the example of oil production in the United States. It is then illustrated by results obtained for various other countries, i. e. future gas production in the United States, future oil production of Canada, the Soviet Union, Venezuela and the world as a whole outside of the Middle East.

  2. Product Structure, the Heart of Product Definition

    Science.gov (United States)

    DeHoog, C., Jr.

    1999-01-01

    This paper describes the LMMSS Product Definition System (PDS) philosophy and approach were the use of each item parts document or software can be traced to a specific end item (EI) serial/tail number of the product. It explains why a part-oriented approach to data organization and configuration management is required. The definition of part-oriented is that all appropriate product definition data products will be collected. Referenced and managed by their linkage/relationship to parts/items, The paper will touch upon how LMMSS store/controls product definition information under each project's top product designator in a two tiered approach. One tier for each product end item and another tier which contain/controls listings of drawings, documents. Specifications and standards that are required for hardware item definition.

  3. Comment calculer le contenu énergétique des produits d'origine pétrolière et de leurs substituts d'origine charbonnière ou végétale How to Calculate the Energy Content of Products of Petroleum Origin and of Their Substitutes from Coal Or Biomass

    Directory of Open Access Journals (Sweden)

    Leprince P.

    2006-11-01

    Full Text Available Le contenu énergétique des produits pétroliers issus du raffinage, des produits de vapocraquage de naphta et de quelques produits de la pétrochimie, a été calculé en prenant en considération, la dépense énergétique entre coproduits ou sous-produits d'une même transformation, les variantes de procédés et l'effet des divers modes de fourniture d'énergie nécessaire à la transformation considérée. The energy content of petroleum products coming from refining, of naphta steam-cracking products and of various petrochemical products is calculated by taking into consideration the energy expenditure between the coproducts or by products from the same transformation, the different processes and the effect of different ways in which to supply the energy required for the transformation being considered.

  4. Heavy Flavour Production

    CERN Document Server

    Nason, Paolo; Ridolfi, Giovanni

    1995-01-01

    We review the status of heavy flavour production in QCD. Comparison of experimental and theoretical results for top and bottom production are given. Selected topics in charm production are also discussed.

  5. Animal Product Safety Information

    Science.gov (United States)

    ... Home Animal & Veterinary Safety & Health Product Safety Information Product Safety Information Share Tweet Linkedin Pin it More ... to report adverse experiences with veterinary drugs. Additional Product Information Questions and Answers: Evanger’s Dog and Cat ...

  6. Urinary incontinence products

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003973.htm Urinary incontinence products To use the sharing features on this ... There are many products to help you manage urinary incontinence . You can decide which product to choose based ...

  7. Liquid hydrogen and deuterium targets; Cibles a hydrogene et deuterium liquides

    Energy Technology Data Exchange (ETDEWEB)

    Bougon, M; Marquet, M; Prugne, P [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1961-07-01

    A description is given of 1) Atmospheric pressure target: liquid hydrogen, 400 mm thickness; thermal insulation: styrofoam; the hydrogen vapors are used to improve the target cooling; Mylar windows. 2) Vacuum target: 12 liter content: hydrogen or deuterium; liquid thickness 400 mm; thermal insulation is afforded by a vacuum vessel and a liquid nitrogen shield. Recovery and liquefaction of deuterium vapors are managed in the vacuum vessel which holds the target. The target emptying system is designed for operating in a few minutes. (author) [French] Description de: 1) Cible a pression atmospherique; hydrogene liquide, 400 mm d'epaisseur; l'isolement thermique: styrofoam; on utilise les vapeurs d'hydrogene pour ameliorer le refroidissement de la cible; hublots en Mylar. 2) Cible sous vide; contenance 12 litres; hydrogene ou deuterium; epaisseur du liquide 400 mm; l'isolement thermique est assure par une cuve a vide et un ecran d'azote liquide. Recuperation et liquefaction des vapeurs de deuterium sont effectuees dans la cuve a vide contenant la cible. Le systeme de vidange pour la cible est concu pour fonctionner en quelques minutes. (auteur)

  8. COTTAGE CHEESE PRODUCTS FUNCTIONALITY

    Directory of Open Access Journals (Sweden)

    L. V. Golubeva

    2015-01-01

    Full Text Available Cottage cheese products holds a significant place among the dairy and milk-containing products. The range of products includes cheese: cheese, pastes, creams, cakes, etc. Such diversity can be attributed to their popularity among the population and benefit brought by the body from regular use. Curd protein is much better and easier to digest by the body than protein fish, meat or milk. Rich curd products lysine and methionine. Minerals contained in cheese products have a positive effect on bone formation and structure of tissues. The composition of curd products, in addition to cheese and dairy ingredients may include non-dairy ingredients origin. Today, for the production of cheese products use the most advanced technologies to further enrich its structure and significantly improve the nutritional value. Pine nut is widely used in the manufacture of many dairy products. But, in most cases, the production of dairy products as a filler used pine nut cake, which deprives the finished product valuable cedar oil. The authors proposed a technology for producing curd product with the addition of pine nuts and honey (pine nuts and fructose. Compatible with cream cheese filling insertion determined sensory organoleptic point scale. he optimum dosage of components: pine nuts – 5 %, honey – 10 % fructose – 7 %. Technological process of cottage cheese product is different from the traditional operations training components and their introduction into the finished cheese. Identify indicators of quality of the new product. Production of curd products thus expanding the range of dairy products functional orientation.

  9. Feasibility study for the construction of a methane production plant on the basis of 'green waste' collected in the canton of Ticino; Machbarkeitsstudie Biogasanlage im Tessin -- Studio di fattibilita di un impianto di biometanizzazione per i rifiuti verdi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This report for the Swiss Federal Office of Energy presents a feasibility study for the construction of a methane production plant on the basis of 'green waste' collected in the canton of Ticino, in Southern Switzerland. The objective is power generation from compostable organic waste (about 10'000 t/year) and marketing of this electrical energy under a 'clean energy' label. The biogas process together with the technologies used are described. A review of the methane production plants available today on the European market is given, together with a presentation of some manufacturers. The local situation in Ticino, including available volume and composition of green waste as well as the possible usages for the residues from the methane production plants, is discussed. Potential sites for the future production plant are listed. Economic aspects are summarised in the form of diagrams. In annexes, more details on the plant operation cost are given and pictures of the different fermentation installation candidates are presented. [French] Ce rapport est le resultat de l'etude de la faisabilite de l'implantation d'une usine de methanisation des dechets verts pour le canton du Tessin en Suisse. L'objectif est de valoriser l'energie des dechets compostables (typiquement 10'000 t/an) et d'en produire de l'energie electrique qui sera vendue sous un label d'energie propre. Le processus de biomethanisation est presente, de meme que les techniques utilisees. Suit une presentation des diverses installations de methanisation actuellement disponibles sur le marche europeen et des entreprises qui les proposent. La situation propre au Tessin comme la quantite et la composition des dechets verts et les possibilites d'utilisation des masses residuelles est analysee. Le lieu d'implantation de l'usine est aussi discute. Finalement, un bilan economique est presente sous forme graphique. Le document est

  10. Les milieux extrêmes. Journées d'études du CESTA, Paris, 4-5 octobre 1983 Extreme Environments. Cesta Conference, Paris, 4-5 October 1983

    Directory of Open Access Journals (Sweden)

    Bertrand A. R. V.

    2006-11-01

    Full Text Available Ces journées d'études étaient consacrées aux problèmes impliqués par l'exploration et l'exploitation des milieux extrêmes. On n'a pas cherché à approfondir la notion de milieu extrême mais à en étudier trois principaux : l'espace, les grands fonds marins, les enceintes soumises à de forts rayonnements nucléaires, à travers quatre thèmes de problèmes communs : la robotique, la sécurité, les matériaux et l'intervention humaine. Cette réunion a mis en évidence : - le dilemme constitué par la nécessité d'assurer d'une part la sécurité de la population par l'emploi de techniques fiables donc éprouvées et d'autre part le progrès scientifique dont les techniques nouvelles peuvent être fiables sans être encore éprouvées ; - l'emploi généralisé de la robotique (soudage sous-marin profond, engin submersible non habité à intelligence artificielle. . . ; - la création de matériaux nouveaux (composites à matrice métallique, fibres optique en verre chloré, lubrifiant opérant sous vide. . . - la mise au point de méthodes nouvelles pour l'analyse probabiliste des risques. This conference concentrated on the problems raised by the exploration and productive use of extreme environments. No effort was made to define the concept of an extreme environnent, but three specific ones were considered: space, great sea depths, enclosures subjected Io intense nuclear radiation. There were four topics covering problems encountered in such environments: robotics, safety, materials and human intervention. This meeting brought out the following points: - The dilemma brought on by the need to ensure part of the safety of the population by using reliable, hence proven, techniques at the saure time as scientific progress in which new techniques may be reliable without yet being proven. - The generalized use of robotics (deep subsea welding, unmanned submersible with artificial intelligence, etc. . - The creation of new materials

  11. Atmospheric corrosion of uranium-carbon alloys; Corrosion atmospherique des alliages uranium-carbone

    Energy Technology Data Exchange (ETDEWEB)

    Rousset, P; Accary, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The authors study the corrosion of uranium-carbon alloys having compositions close to that of the mono-carbide; they show that the extent of the observed corrosion effects increases with the water vapour content of the surrounding gas and they conclude that the atmospheric corrosion of these alloys is due essentially to the humidity of the air, the effect of the oxygen being very slight at room temperature. They show that the optimum conditions for preserving U-C alloys are either a vacuum or a perfectly dry argon atmosphere. The authors have also established that the type of corrosion involved is a corrosion which 'cracks under stress' and is transgranular (it can also be intergranular in the case of sub-stoichiometric alloys). They propose, finally, two hypotheses for explaining this mechanism, one of which is illustrated by the existence, at the fissure interface, of corrosion products which can play the role of 'corners' in the mono-carbide grains. (authors) [French] Les auteurs etudient la corrosion des alliages uranium-carbone de composition voisine du monocarbure; ils montrent que l'importance des effets de la corrosion observee augmente avec la teneur en vapeur d'eau du milieu gazeux ambiant et concluent que la corrosion atmospherique de ces alliages est due essentiellement a l'humidite de l'air, l'action de l'oxygene de l'air etant tres faible a la temperature ambiante. Ils indiquent que les conditions optimales de conservation des alliages U-C sont le vide ou une atmosphere d'argon parfaitement desseches. D'autre part, les auteurs etablissent que le type de corrosion mis en jeu est une corrosion 'fissurante sous contrainte', transgranulaire (pouvant egalement etre intergranulaire dans le cas d'alliages sous-stoechiometriques). Ils proposent enfin deux hypotheses pour rendre compte de ce mecanisme, dont l'une est illustree par la mise en evidence, a l'interface des fissures, de produits de corrosion pouvant jouer le role de 'coins' dans les grains de

  12. STRATEGIES FOR INCREASING PRODUCTIVITY IN PRODUCTION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Diego Pacheco

    2014-05-01

    Full Text Available The main objective of this article is to point a set of practical strategies that can be adopted to increase the capacity of constraints resources on production systems, when the constraint is inside the factory and not is in the market. To serve this purpose will be presented strategies based on best practices of the Theory of Constraints, Lean Manufacturing and Total Productive Maintenance. This article also presents the mains tools for the deployment of these methodologies. The survey results have provided an objective set of practical strategy that can be used to increase the capacity and productivity of production systems according to the needs of each manufacturing system.

  13. PDT (Product Data Technology), Production and Society

    DEFF Research Database (Denmark)

    Vesterager, Johan

    1997-01-01

    Information and communication technology (ICT) constitute a genuine technical revolution by enabling a dynamic and flexible support or automation of knowledge and information work. Bearing in mind that products are frozen knowledge, ICT as known will change the way we produce products dramatically....... The use of ICT in engineering of products constitutes product data technology (PDT).This paper presents a a basic platform for an understanding the ongoing revolution with focus on the PDT-area taking outset in the fundamental elements of knowledge and information work: creation, transformation...

  14. An automatic device for refilling liquid nitrogen traps at constant time intervals; Dispositif automatique assurant le remplissage de pieces en azote liquide a intervales de temps constant

    Energy Technology Data Exchange (ETDEWEB)

    Bourguillot, R; Lohez, P [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    We have been led to study the design of an automatic device for the filling of liquid nitrogen traps at constant time intervals in connection with the maintenance of a type MS 5 mass spectrometer; in the tube of this apparatus it is necessary to maintain a vacuum of about 10{sup -7} mm of mercury. The replenishing is done every four hours. The presence in the vacuum section of an electron multiplier has led us to provide a safety-device making it impossible for mercury vapour to come into contact with either the copper tube or the multiplier in the event of an incident leading to the warming up of the traps. In case of a breakdown, the vacuum section is therefore brought up to atmospheric pressure by the introduction of nitrogen. (author) [French] Nous avons ete conduits pour la maintenance d'un spectrometre de masse type MS 5, dans le tube duquel il faut entretenir un vide de quelques 10{sup -7} mm de mercure, a etudier un systeme de remplissage automatique a intervalle de temps fixe des pieges en azote liquide. Ce remplissage se fait toutes les quatre heures. La presence dans l'enceinte sous vide, d'un multiplicateur d'electrons, nous a amenes a prevoir un systeme de securite evitant de mettre le tube en cuivre et le multiplicateur en contact avec la vapeur de mercure en cas d'incident amenant le rechauffage des pieges. En cas de panne, l'enceinte sous vide est donc ramenee a la pression atmospherique par une introduction d'azote. (auteur)

  15. Animal Production Research Advances

    African Journals Online (AJOL)

    Animal Production Research Advances is a peer-review journal established expressly to promote the production of all animal species utilized as food. The journal has an international scope and is intended for professionals in animal production and related sciences. We solicit contributions from animal production and ...

  16. Intelligent products : A survey

    NARCIS (Netherlands)

    Meyer, G.G.; Främling, K.; Holmström, J.

    This paper presents an overview of the field of Intelligent Products. As Intelligent Products have many facets, this paper is mainly focused on the concept behind Intelligent Products, the technical foundations, and the achievable practical goals of Intelligent Products. A novel classification of

  17. Making Product Customization Profitable

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

    2010-01-01

    The main result presented in this paper is the Framework for Product Family Master Plan. This framework supports the identification of a product architecture for companies that customize products and services. The framework has five coherent aspects, the market, product assortment, supply...

  18. Consumer Product Category Database

    Science.gov (United States)

    The Chemical and Product Categories database (CPCat) catalogs the use of over 40,000 chemicals and their presence in different consumer products. The chemical use information is compiled from multiple sources while product information is gathered from publicly available Material Safety Data Sheets (MSDS). EPA researchers are evaluating the possibility of expanding the database with additional product and use information.

  19. Ergonomic Product Design 21

    International Nuclear Information System (INIS)

    Kwon, Yeong Guk

    1996-09-01

    This book explains basic of ergonomic product design with human engineering, image engineering and strategy of that design, ergonomic industrial design, which includes product design to access the human engineering in development of new product and customer satisfaction, application technology of image engineering, industrial design of human engineering item and strategy of human engineering, a good ergonomic design. It also tells of examples of convenient design for human such as hardware product and software product in automobile, telephones for ergonomic product in the future, new goods and new technology, ergonomic product in house and office, and computers and robots in the future.

  20. Product Family Assessment

    DEFF Research Database (Denmark)

    Kvist, Morten

    their focus from single products to entire product families and try to incorporate the development of product variety into a future product family. The key is to create fit between the product design and production setup. The challenge of understanding this fit and modelling dispositional relations between...... and on the ideas of lean production, plus experiences from the industrial collaboration. The idea of waste from the lean philosophy is brought into a product variety context, and discussed in relation to product development. Verification of the model has been carried out in an industrial setting at Danfoss......This thesis reports the results of a PhD project from the Technical University of Denmark. The research has been carried out in a collaborative project with the Danish company Danfoss Automatic Controls. In the global market companies are struggling to meet customers’ expectation of products...

  1. Designing Product Families

    DEFF Research Database (Denmark)

    Pedersen, Per Erik Elgård; Miller, Thomas Dedenroth

    1998-01-01

    Manufacturing companies that operate with products aimed at different market segments and applications are experiencing an increasing demand from customers who expect products to be tailored to their exact needs rather than accepting general products based on average customer needs. This trend ha......: Variety, Design Principles, and Product Maturity.......Manufacturing companies that operate with products aimed at different market segments and applications are experiencing an increasing demand from customers who expect products to be tailored to their exact needs rather than accepting general products based on average customer needs. This trend has...... led to a new business paradigm, "mass customization", where companies strive to provide highly customized products while still maintaining the efficiency of the classical mass production enterprise. One of the key factors in mass customization has been efficient use of product platforms...

  2. Production Function Geometry with "Knightian" Total Product

    Science.gov (United States)

    Truett, Dale B.; Truett, Lila J.

    2007-01-01

    Authors of principles and price theory textbooks generally illustrate short-run production using a total product curve that displays first increasing and then diminishing marginal returns to employment of the variable input(s). Although it seems reasonable that a temporary range of increasing returns to variable inputs will likely occur as…

  3. Probiotic fermented dairy products

    OpenAIRE

    Adnan Tamime; Rajka Božanić; Irena Rogelj

    2003-01-01

    Fermented dairy products are the most popular vehicle used in theindustry for the implantation of the probiotic microflora in humans. Therefore this paper provides an overview of new knowledge on probiotic fermented dairy products. It involves historical developments, commercial probiotic microorganisms and products, and their therapeutic properties, possibilities of quality improvement of different types of newly developed fermented dairy products together with fermented goat’s milk products.

  4. Software product quality measurement

    OpenAIRE

    Godliauskas, Eimantas

    2016-01-01

    This paper analyses Ruby product quality measures, suggesting three new measures for Ruby product quality measurement tool Rubocop to measure Ruby product quality characteristics defined in ISO 2502n standard series. This paper consists of four main chapters. The first chapter gives a brief view of software product quality and software product quality measurement. The second chapter analyses object oriented quality measures. The third chapter gives a brief view of the most popular Ruby qualit...

  5. Fission products collecting devices

    International Nuclear Information System (INIS)

    Matsumoto, Hiroshi

    1979-01-01

    Purpose: To enable fission products trap with no contamination to coolants and cover gas by the provision of a fission products trap above the upper part of a nuclear power plant. Constitution: Upon fuel failures in a reactor core, nuclear fission products leak into coolants and move along the flow of the coolants to the coolants above the reactor core. The fission products are collected in a trap container and guided along a pipeline into fission products detector. The fission products detector monitors the concentration of the fission products and opens the downstream valve of the detector when a predetermined concentration of the fission products is detected to introduce the fission products into a waste gas processing device and release them through the exhaust pipe. (Seki, T.)

  6. BRAND - PRODUCT INTERDEPENDENCE

    Directory of Open Access Journals (Sweden)

    Tudor NISTORESCU

    2014-06-01

    Full Text Available In this paper we conceptually discussed the brands’ role in the society, the dimensions of branding and the relationship between the brand and the products. We adhere to the main ideas expressed in the literature, that the brand is more than a product. However the product is needed to render the brand tangible. The product is the magic box that delivers the brand experience. Without the product, the brand meaning would have difficulties in attracting customers. More studies are needed to investigate the brand-product relationship.

  7. Emulsified Water Products

    Directory of Open Access Journals (Sweden)

    Elif Tuğçe AKSUN

    2016-12-01

    Full Text Available Seafood is very important depending on having high protein rate and easily digestibility by human, for supply to an important part of animal protein needed. Determining the quality of emulsion-type products, emulsion stability, viscosity and gel strength properties are very important. In the production of products specified in this property emulsion; the main protein ratio and properties of raw material used while you; emulsion pH, temperature, ionic violence, mixing speed, type of fat and additives that are used as well. Previous studies show that particularly of products resulting from water emulsified chicken and goat meat emulsified product obtained from a high capacity of emulsified and compared to cattle and sheep meat is close to specifications, preparation of emulsified type products may be appropriate for the use of fish meat. Another quality parameter in the emulsified meat products, viscosity depends on the amount of meat used in direct proportion with the texture. Fish meat animals in connective tissue connective tissue in meat other butchers to rate ratio is quite low. In this respect, the fish meat produced using emulsified products viscosity according to products prepared using other meat products is quite low. Fish meat produced using emulsified fish sausage products based on surimi, sausage and fish pate fish varieties classed emulsion type products. In this review the different types of seafood using emulsified meat product.

  8. Micro Products - Product Development and Design

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    Innovation within the field of micro and nano technology is to a great extent characterized by cross-disciplinary skills. The traditional disciplines like e.g. physics, biology, medicine and engineering are united in a common development process that can only take place in the presence of multi......-disciplinary competences. One example is sensors for chemical analysis of fluids, where chemistry, biology and flow mechanics all influence the design of the product and thereby the industrial fabrication of the product [1]. On the technological side the development has moved very fast, primarily driven by the need...... of the electronics industry to create still smaller chips with still larger capacity. Therefore the manufacturing technologies connected with micro/nano products in silicon are relatively highly developed compared to the technologies used for manufacturing micro products in metals, polymers and ceramics. For all...

  9. Productivity and Competitiveness of Sorghum Production in ...

    African Journals Online (AJOL)

    showed that sorghum production in the study areas yielded profitable returns ... Keywords: Sorghum, Profitability, Competitiveness, Investment Potential, .... Guinness Ghana Brewery Limited to estimate cost and returns at the marketing sector ...

  10. Product line design

    Czech Academy of Sciences Publication Activity Database

    Anderson, S. P.; Celik, Levent

    2015-01-01

    Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 Institutional support: RVO:67985998 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

  11. Advances in production technology

    CERN Document Server

    2015-01-01

    This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”,  held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.

  12. Transformer Industry Productivity Slows.

    Science.gov (United States)

    Otto, Phyllis Flohr

    1981-01-01

    Annual productivity increases averaged 2.4 percent during 1963-79, slowing since 1972 to 1.5 percent; computer-assisted design and product standardization aided growth in output per employee-hour. (Author)

  13. Phenomenology of lepton production

    International Nuclear Information System (INIS)

    Renard, F.M.

    1976-06-01

    The problem of lepton production in hadronic collisions is reviewed. The following subjects are developed: the Drell-Yan model for continuous l + l - production, vector mesons and clusters, and other sources of direct leptons [fr

  14. Pesticide Product Label System

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Pesticide Product Label System (PPLS) provides a collection of pesticide product labels (Adobe PDF format) that have been approved by EPA under Section 3 of the...

  15. Dictionaries for text production

    DEFF Research Database (Denmark)

    Fuertes-Olivera, Pedro; Bergenholtz, Henning

    2018-01-01

    Dictionaries for Text Production are information tools that are designed and constructed for helping users to produce (i.e. encode) texts, both oral and written texts. These can be broadly divided into two groups: (a) specialized text production dictionaries, i.e., dictionaries that only offer...... a small amount of lexicographic data, most or all of which are typically used in a production situation, e.g. synonym dictionaries, grammar and spelling dictionaries, collocation dictionaries, concept dictionaries such as the Longman Language Activator, which is advertised as the World’s First Production...... Dictionary; (b) general text production dictionaries, i.e., dictionaries that offer all or most of the lexicographic data that are typically used in a production situation. A review of existing production dictionaries reveals that there are many specialized text production dictionaries but only a few general...

  16. Household Products Database: Pesticides

    Science.gov (United States)

    ... of Products Manufacturers Ingredients About the Database FAQ Product ... control bulbs carpenter ants caterpillars crabgrass control deer dogs dogs/cats fertilizer w/insecticide fertilizer w/weed ...

  17. Consumer Product Category Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Chemical and Product Categories database (CPCat) catalogs the use of over 40,000 chemicals and their presence in different consumer products. The chemical use...

  18. Globalization and Productivity

    DEFF Research Database (Denmark)

    Hayakawa, Kazunobu; Machikita, Tomohiro

    2012-01-01

    Recent empirical studies which utilize plant- or establishment-level data to examine globalization's impact on productivity have discovered many causal mechanisms involved in globalization's impact on firms’ productivity. Because these pathways have been broad, there have been few attempts...

  19. Production sharing agreements

    International Nuclear Information System (INIS)

    1994-01-01

    This paper, which was presented at the Production Sharing Agreement seminar, discusses economic rent, negotiations, trends in fiscal system development, and concessionary systems. Production sharing contracts, risk service contracts, joint ventures and the global market are examined. (UK)

  20. Alcohol production from whey

    Energy Technology Data Exchange (ETDEWEB)

    Reesen, L

    1978-01-01

    The continuous production of ethanol from whey permeate, by fermentation of its lactose with Kluyveromyces fragilis, is described. From whey containing 4.4% lactose, production costs were very competitive with those for alcohol from molasses.

  1. National pulpwood production, 2010

    Science.gov (United States)

    Ronald J. Piva; James W. Bentley; Steven W. Hayes

    2014-01-01

    U.S. pulpwood production amounted to 86.5 million cords in 2010, a decrease of 4 percent from 2008. Roundwood production totaled 65.7 million cords and accounted for 76 percent of the Nation's total pulpwood production. The Southern Region led the Nation in total production with 65.5 million cords, followed by the Northern Region with 12.8 million cords, and the...

  2. National pulpwood production, 2008

    Science.gov (United States)

    Tony G. Johnson; Ronald J. Piva; Brian F. Walters; al. et.

    2011-01-01

    United States’ pulpwood production amounted to 89.2 million cords in 2008. Roundwood production totaled 63.0 million cords and accounted for 71 percent of the Nation’s total pulpwood production. The use of wood residue totaled 26.2 million cords. Georgia led the Nation in total production, with 11.6 million cords. In 2008, 146 mills were operating and drawing wood from...

  3. Southern pulpwood production, 2007

    Science.gov (United States)

    Tony G. Johnson; Carolyn D. Steppleton; James w. Bentley

    2009-01-01

    The South’s production of pulpwood increased from 64.7 million cords in 2006 to 65.7 million cords in 2007. Roundwood production increased 1.2 million cords to 47.6 million cords and accounted for 72 percent of the total pulpwood production. The use of wood residue declined 1 percent to 18.2 million cords. Alabama led the South in total production at 10.6 million cords...

  4. Nordic Noir Production Values

    DEFF Research Database (Denmark)

    Waade, Anne Marit; Jensen, Pia Majbritt

    2013-01-01

    In this article the authors argue that Nordic noir constitutes a set of production values utilised and conceptualised to make Danish television series attractive in the international market. The idea of production values is embedded into a media industrial context where market principles of target...... by relating the specific Nordic noir production values present in the two series to changing conditions in Danish television drama production, in particular the internationalisation of DR’s Drama Division....

  5. Pomegranate production and marketing

    Science.gov (United States)

    This book is relatively short, with 134 pages, 15 chapters, 52 figures, and 20 tables. It ranges from cultivar descriptions, production, biotic and abiotic challenges to production, to postharvest, aril and juice production, health benefits, and international trade. It contains great information and...

  6. Reconstituted products from oak

    Science.gov (United States)

    W. C. Lewis; B. G. Heebink

    1971-01-01

    "Reconstituted" describes a family of panel products made from fractionated oak, bonded with either a synthetic resin or a natural lignin bond. Several current commercial fiber panel products from oak are described, and the status of research on experimental products and processes is presented. Recent technological developments are removing the stigma...

  7. Scenario based product design

    NARCIS (Netherlands)

    Tideman, M.

    2008-01-01

    Creating good products is not an easy thing to do. There are usually many different people who have an interest in the product. People such as the user, of course, but also marketing managers, production engineers, maintenance workers, recycling specialists, and government representatives, just to

  8. Age, Wage and Productivity

    NARCIS (Netherlands)

    van Ours, J.C.; Stoeldraijer, L.

    2010-01-01

    Previous empirical studies on the effect of age on productivity and wages find contradicting results. Some studies find that if workers grow older there is an increasing gap between productivity and wages, i.e. wages increase with age while productivity does not or does not increase at the same

  9. Polling, production & priorities

    NARCIS (Netherlands)

    Winands, E.M.M.

    2007-01-01

    Polling, Production & Priorities The present monograph focuses on the so-called stochastic economic lot scheduling problem (SELSP), which deals with the make-to-stock production of multiple standardized products on a single machine with limited capacity under random demands, possibly random setup

  10. Star Products and Applications

    OpenAIRE

    Iida, Mari; Yoshioka, Akira

    2010-01-01

    Star products parametrized by complex matrices are defined. Especially commutative associative star products are treated, and star exponentials with respect to these star products are considered. Jacobi's theta functions are given as infinite sums of star exponentials. As application, several concrete identities are obtained by properties of the star exponentials.

  11. Framework of product experience

    NARCIS (Netherlands)

    Desmet, P.; Hekkert, P.

    2007-01-01

    In this paper, we introduce a general framework for product experience that applies to all affective responses that can be experienced in human-product interaction. Three distinct components or levels of product experiences are discussed: aesthetic experience, experience of meaning, and emotional

  12. Influence de la composition chimique et de la microstructure sur le dégazage de l'hydrogène des aciers inoxydables austénitiques destinés à l'ultravide

    CERN Document Server

    Reinert, Marie-Pierre

    Dans les installations métalliques sous ultravide, l'hydrogène est le principal constituant de l'atmosphère résiduelle. Le flux de dégazage d'une tôle en acier inoxydable austénitique, matériau fréquemment utilisé en technologie du vide, après un étuvage sous vide, est typiquement de quelques 10-12 Torr.1/cm2.s, et est constitué principalement d'hydrogène. Dans le cadre de cette étude, un appareillage de thermodésorption sous ultravide a été conçu et mis au point pour étudier les phénomènes d'adsorption, de diffusion et de piégeage de l'hydrogène résiduel dans les aciers inoxydables austénitiques. Différents aciers ont été étudiés: l'acier 316L (avec trois modes d'élaboration différents), l'acier 316LN et d'autres aciers stabilisés au titane ou au niobium. La microstructure et la couche d'oxyde de ces aciers ont été caractérisées à l'état de réception et pendant les cycles de thermodésorption. Pendant un cycle de thermodésorption, les principales espèces désorbées...

  13. Evolving production network structures

    DEFF Research Database (Denmark)

    Grunow, Martin; Gunther, H.O.; Burdenik, H.

    2007-01-01

    When deciding about future production network configurations, the current structures have to be taken into account. Further, core issues such as the maturity of the products and the capacity requirements for test runs and ramp-ups must be incorporated. Our approach is based on optimization...... modelling and assigns products and capacity expansions to production sites under the above constraints. It also considers the production complexity at the individual sites and the flexibility of the network. Our implementation results for a large manufacturing network reveal substantial possible cost...

  14. Product Structuring, an overview

    DEFF Research Database (Denmark)

    Tichem, Marcel; Storm, Ton; Andreasen, Mogens Myrup

    1997-01-01

    .In the paper, the field of product structuring is defined and broken down into topics. For each of the topics, results of research are presented. Issues for further research are identified. The references in the paper refer to papers in the proceedings of the workshops.......This paper presents the highlights of two WDK Workshops on Product Structuring. Product structuring plays an important role in creating products which have good functional and life-cycle related properties, in design process management, and in several other company functions like production control...

  15. Productivity analysis of sunflower production in Turkey

    International Nuclear Information System (INIS)

    Semerci, A.

    2012-01-01

    In Turkey, which ranks the tenth country worldwide in the sunflower (Helianthus annuus L.) production, 55% of the production is carried out in Thrace Region. Therefore, agricultural enterprises in Thrace Region, situated in the European part of Turkey have specialized in producing sunflower, and have become the centre of vegetable oil industry in the region in terms of produced raw material. This research was conducted in 182 agricultural enterprises in 3 provinces of Thrace Region in Turkey and its objective was to determine input/output relations in sunflower production. The study indicates that the determination coefficient (r/sup 2/) derived from Cobb-Douglas production function was significant at 0.01 level and the elasticity coefficients of the variables (except chemical fertilizer) were found beta i positive in derived equation. It was determined that the variable of herbicide cost had the highest value of the marginal effectiveness coefficients and none of the variables was used at economically optimal level in the study area. When the Marginal Technical Substitution and the Price Rates were taken into consideration, it was noted that only the seed cost/hoeing cost was closest to economically optimum level (1.10). According to stepwise analysis the Land Renting Value was determined as the most important variable in sunflower production. (author)

  16. Product Platform Modeling

    DEFF Research Database (Denmark)

    Pedersen, Rasmus

    for customisation of products. In many companies these changes in the business environment have created a controversy between the need for a wide variety of products offered to the marketplace and a desire to reduce variation within the company in order to increase efficiency. Many companies use the concept...... other. These groups can be varied and combined to form different product variants without increasing the internal variety in the company. Based on the Theory of Domains, the concept of encapsulation in the organ domain is introduced, and organs are formulated as platform elements. Included......This PhD thesis has the title Product Platform Modelling. The thesis is about product platforms and visual product platform modelling. Product platforms have gained an increasing attention in industry and academia in the past decade. The reasons are many, yet the increasing globalisation...

  17. Low income product innovation

    Directory of Open Access Journals (Sweden)

    Maria Cecília Sobral

    2008-10-01

    Full Text Available At affluent markets, the literature on product development management tells us to aggregate value and technology, to differentiate products and to launch fast. And at the low-income markets? This exploratory research defines a popular product, characterizes and measures their markets in Brazil, and identifies innovation strategies for them. The results suggest that the effective strategic orientation differs from affluent markets. It includes: to enhance the auto service component; to identify and service the key functionalities to the targeted public; to standardize products and increase the production scale; to extend the product life cycle; to use convenient distribution and marketing channels; to build product images that have appeal in the popular market; to offer longer financing horizons with befittingly lower installments. Data came from market researches and general demographic census. General media published stories were used to identify companies and their strategies. And a few case studies allowed the authors a deeper exploration of the relevant themes.

  18. Chlorhexidine in cosmetic products

    DEFF Research Database (Denmark)

    Opstrup, Morten Schjørring; Johansen, Jeanne Duus; Bossi, Rossana

    2015-01-01

    or an antimicrobial agent in cosmetic products at a concentration up to 0.3%, as set by the European Cosmetics Directive (now Regulations). OBJECTIVES: To identify cosmetic product types containing chlorhexidine, and to measure the concentration of chlorhexidine in selected products. METHODS: Between February 2013...... and April 2013, we checked for chlorhexidine in cosmetic products in 14 supermarkets, one hairdressing salon and one beauty and retail store in Copenhagen, Denmark by reading the ingredient labels. The chlorhexidine concentration was measured in 10 selected products by high-performance liquid chromatography...... concentrations were 0.01-0.15%. CONCLUSIONS: We found chlorhexidine in various cosmetic product types, predominantly aimed at females, and in hair products. The measured chlorhexidine concentrations were all within the permitted limit. The relevance for allergic sensitization should be further explored....

  19. Pratique cacaoyère, délitement de l'accès au foncier et sécurité alimentaire dans la sous-préfecture de Dania (centre-ouest de la Côte d'Ivoire

    Directory of Open Access Journals (Sweden)

    Koffi, GRY.

    2018-01-01

    Full Text Available Cocoa Cultivation, Disintegration of Land Access and Food Security in the Sub-prefecture of Dania (Center-west of Côte d'Ivoire. The cocoa plantations are exponentially increasing and most of the rural households in the forest area of Ivory Coast are involved in it. In the sub-prefecture of Dania, 77.7% of the households have a cocoa exploitation. Currently, the cocoa plantations in the area of Dania are facing a production crisis which is amplified by the military political crisis of September 2002. The incomes of the producers of cocoa are decreasing. Because of the great impact of the cocoa production on farm land, the available area to fulfill the food needs becomes insufficient. Forty three percent of the households lack sufficient land to satisfy their food production. The minimum period of seven year of fallow being no longer respected soil fertility problems are created and consequently a decrease of the agricultural yields. Fifty seven percent of the households are facing food insecurity. Therefore, the households have elaborated new strategies for land appropriation, such as the borrowing of farm land (13 %, the increased use of the phytosanitary products (52% and particularly the higher attraction for the exploitation of fallow land (40%.

  20. Play as productionproduction as game?

    DEFF Research Database (Denmark)

    Eichberg, Henning

    2015-01-01

    Play-related products and their export have through recent decades contributed to a certain Danish image on the world level – with Lego bricks at the commercial end and adventure playgrounds at the pedagogical end. The phenomena of toy production and play exports challenge our understanding of what...... “play” and “game” are, and of their social as well as political significance. At the municipal level, the city of Odense – “city of Hans Christian Andersen” – is branding itself as “city of play”. On the international level, Danish play-related products have expanded on the world market. In the field...... of sport, Danish sport is not just elite sport, but also organized in local associations. People meet in mass summer festivals of popular sport. Folk Academies develop sport as personal development, often in an experimental way. Street sports, parkour, play and games are promoted. Civil society is a basis...

  1. 17 CFR 229.1204 - (Item 1204) Oil and gas production, production prices and production costs.

    Science.gov (United States)

    2010-04-01

    ... production, production prices and production costs. 229.1204 Section 229.1204 Commodity and Securities... production, production prices and production costs. (a) For each of the last three fiscal years disclose... production cost, not including ad valorem and severance taxes, per unit of production. Instruction 1 to Item...

  2. Nephrotoxicity of Natural Products.

    Science.gov (United States)

    Nauffal, Mary; Gabardi, Steven

    2016-01-01

    The manufacture and sale of natural products constitute a multi-billion dollar industry. Nearly a third of the American population admit to using some form of complementary or alternative medicine, with many using them in addition to prescription medications. Most patients fail to inform their healthcare providers of their natural product use and physicians rarely inquire. Annually, thousands of natural product-induced adverse events are reported to Poison Control Centers nationwide. Natural product manufacturers are not responsible for proving safety and efficacy, as the FDA does not regulate them. However, concerns exist surrounding the safety of natural products. This review provides details on natural products that have been associated with renal dysfunction. We have focused on products that have been associated with direct renal injury, immune-mediated nephrotoxicity, nephrolithiasis, rhabdomyolysis with acute renal injury, hepatorenal syndrome, and common adulterants or contaminants that are associated with renal dysfunction. The potential for natural products to cause renal dysfunction is justifiable. It is imperative that natural product use be monitored closely in all patients. Healthcare practitioners must play an active role in identifying patients using natural products and provide appropriate patient education. © 2016 S. Karger AG, Basel.

  3. Fermentative production of isobutene.

    Science.gov (United States)

    van Leeuwen, Bianca N M; van der Wulp, Albertus M; Duijnstee, Isabelle; van Maris, Antonius J A; Straathof, Adrie J J

    2012-02-01

    Isobutene (2-methylpropene) is one of those chemicals for which bio-based production might replace the petrochemical production in the future. Currently, more than 10 million metric tons of isobutene are produced on a yearly basis. Even though bio-based production might also be achieved through chemocatalytic or thermochemical methods, this review focuses on fermentative routes from sugars. Although biological isobutene formation is known since the 1970s, extensive metabolic engineering is required to achieve economically viable yields and productivities. Two recent metabolic engineering developments may enable anaerobic production close to the theoretical stoichiometry of 1isobutene + 2CO(2) + 2H(2)O per mol of glucose. One relies on the conversion of 3-hydroxyisovalerate to isobutene as a side activity of mevalonate diphosphate decarboxylase and the other on isobutanol dehydration as a side activity of engineered oleate hydratase. The latter resembles the fermentative production of isobutanol followed by isobutanol recovery and chemocatalytic dehydration. The advantage of a completely biological route is that not isobutanol, but instead gaseous isobutene is recovered from the fermenter together with CO(2). The low aqueous solubility of isobutene might also minimize product toxicity to the microorganisms. Although developments are at their infancy, the potential of a large scale fermentative isobutene production process is assessed. The production costs estimate is 0.9 Euro kg(-1), which is reasonably competitive. About 70% of the production costs will be due to the costs of lignocellulose hydrolysate, which seems to be a preferred feedstock.

  4. Réseaux de microtravail et de production virtuelle en Afrique ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ces modèles sont également désignés sous le nom d'" externalisation ouverte avec rémunération " (paid crowdsourcing). À titre d'exemple, le site Mechanical Turk d'Amazon permet aux travailleurs de choisir et d'exécuter des tâches simples en ligne, d'en rendre compte directement au moyen d'une plateforme en ligne et ...

  5. Recombinant organisms for production of industrial products

    OpenAIRE

    Adrio, Jose-Luis; Demain, Arnold L

    2009-01-01

    A revolution in industrial microbiology was sparked by the discoveries of ther double-stranded structure of DNA and the development of recombinant DNA technology. Traditional industrial microbiology was merged with molecular biology to yield improved recombinant processes for the industrial production of primary and secondary metabolites, protein biopharmaceuticals and industrial enzymes. Novel genetic techniques such as metabolic engineering, combinatorial biosynthesis and molecular breeding...

  6. Leading co-production

    DEFF Research Database (Denmark)

    Tortzen, Anne

    leadership styles executed by public managers affect the quality and public value of co-production processes? The paper argues that publicly initiated co-production initiatives are influenced by conflicting governance logics placing public managers in an institutional cross pressure (Lowndes & Roberts, 2013...... of building networks and relations, developing trust and focusing on empowerment and on the participants' resources to develop innovative solutions Drawing on three qualitative case studies of ‘most likely' co-production cases in Danish municipalities, the study identifies three different leadership styles...... and increase public value (Bovaird & Löffler, 2012; Osborne, 2010). The paper argues that a deeper understanding of the dynamics of co-production can be gained from analyzing the leadership dimension of co-production processes, which has hitherto not been given much attention by co-production researchers...

  7. Product Platform Performance

    DEFF Research Database (Denmark)

    Munk, Lone

    The aim of this research is to improve understanding of platform-based product development by studying platform performance in relation to internal effects in companies. Platform-based product development makes it possible to deliver product variety and at the same time reduce the needed resources...... engaging in platform-based product development. Similarly platform assessment criteria lack empirical verification regarding relevance and sufficiency. The thesis focuses on • the process of identifying and estimating internal effects, • verification of performance of product platforms, (i...... experienced representatives from the different life systems phase systems of the platform products. The effects are estimated and modeled within different scenarios, taking into account financial and real option aspects. The model illustrates and supports estimation and quantification of internal platform...

  8. Global product development

    DEFF Research Database (Denmark)

    Hansen, Zaza Nadja Lee; Ahmed-Kristensen, Saeema

    2011-01-01

    Globalisation has enabled companies to globalise their product development process. Today, everything from manufacturing to R&D can be globally distributed. This has led to a more complex and disintegrated product development process. This paper investigates the impacts companies have experienced...... operational solutions to counteract the negative impacts with varying degrees of success. This paper presents a unique look into global product development through an investigation of its impact on the organisation, the product development process, and the product. Furthermore, it shows the solutions...... as a result of this, and how they have been addressed. Data was collected through case studies of five Danish multinational corporations. The findings showed that the companies experienced several challenges when they globalised their product development process. They consequently implemented various...

  9. MICROORGANISMS IN CONFECTIONERY PRODUCTS

    OpenAIRE

    Ľubomíra Juhaniaková; Miroslava Kačániová

    2011-01-01

    The aim of this work was to determine microbiological quality of confectionery products. In confectionery products microbiological parameters: coliforms bacteria, microscopic filamentous fungi and yeasts, Salmonella sp. and staphylococci were observed. The confectionery products were evaluated: Kremes - honey cube, roll Arabica, roll Rona, roll stuffed with apricot cream, honey cube, pinwheel caramel, Sachovnica cut, Zora cut and curd cake. For microbiological tests 18 samples of confectioner...

  10. Southern pulpwood production, 2008

    Science.gov (United States)

    Tony G. Johnson; Carolyn D. Steppleton; James W. Bentley

    2010-01-01

    The South’s production of pulpwood increased from 65.7 million cords in 2007 to 67.0 million cords in 2008. Roundwood production increased by 1.2 million cords to 48.8 million cords and accounted for 73 percent of the South’s total pulpwood production. The use of wood residue remained stable at 18.2 million cords. Georgia led the South...

  11. Southern pulpwood production, 2012

    Science.gov (United States)

    James W. Bentley; Jason A. Cooper

    2015-01-01

    The South’s production of pulpwood increased from 62.7 million cords in 2011 to 63.7 million cords in 2012. Roundwood production decreased by 770,000 cords to 49.3 million cords and accounted for 78 percent of the South’s total pulpwood production. The use of wood residue dropped 15 percent to 14.4 million cords in 2012. Georgia and Alabama led the South in total...

  12. Southern pulpwood production, 2011

    Science.gov (United States)

    James W. Bentley; Carolyn D. Steppleton

    2013-01-01

    The South’s production of pulpwood declined from 65.5 million cords in 2010 to 62.7 million cords in 2011. Roundwood production decreased by 878,000 cords to 50.1 million cords and accounted for 80 percent of the South’s total pulpwood production. The use of wood residue dropped 14 percent to 12.6 million cords in 2011. Georgia and Alabama led the South in total...

  13. Electricity production of Slovakia

    International Nuclear Information System (INIS)

    Czodor, T.

    2003-01-01

    Here is examined the spatial structure of electric energy production divided in hydropower plants (through-flow and re-pumping), thermal power plants as the most expensive way of electric energy production and nuclear power plants where high difficulty and long-term realisation of construction projects and spent financial resources are pointed out. Work describes present structure of electric energy production and consumption and refers to alternative electric energy sources

  14. Working Hours and Productivity

    OpenAIRE

    Collewet, Marion; Sauermann, Jan

    2017-01-01

    This paper studies the link between working hours and productivity using daily information on working hours and performance of a sample of call centre agents. We exploit variation in the number of hours worked by the same employee across days and weeks due to central scheduling, enabling us to estimate the effect of working hours on productivity. We find that as the number of hours worked increases, the average handling time for a call increases, meaning that agents become less productive. Th...

  15. Productivity in Public Services

    OpenAIRE

    Helen Simpson

    2007-01-01

    This paper discusses issues arising in the measurement of productivity in public services. Compared to measuring productivity in the private sector difficulties arise because the output of public services is often un-priced and because some public services are consumed collectively. A key problem is measuring the full range of outputs and quality improvements delivered by public sector organisations that are valued by society. Without comprehensive measures of output productivity statistics m...

  16. Ionization of food products

    International Nuclear Information System (INIS)

    Vasseur, J.P.

    1991-01-01

    After general remarks on foods preservation, on international works and on ionization future prospects, main irradiation sources are described. Recalls on radioactivity, on radiation-matter interaction, on toxicology of ionized foods and on ionized foods detection are given. Ionization applications to various products are reviewed, especially in: - Poultry meat - Fishing products - Fresh fruits and vegetables - Dry fruits and vegetables - spices, tea, infusion - prepacked products... An evaluation of economics and sociocultural impacts is presented in connection with recent experiments [fr

  17. Accounting for productivity

    DEFF Research Database (Denmark)

    Aiyar, Shekhar; Dalgaard, Carl-Johan Lars

    2009-01-01

    The development accounting literature almost always assumes a Cobb-Douglas (CD) production function. However, if in reality the elasticity of substitution between capital and labor deviates substantially from 1, the assumption is invalid, potentially casting doubt on the commonly held view...... that factors of production are relatively unimportant in accounting for differences in labor productivity. We use international data on relative factor shares and capital-output ratios to formulate a number of tests for the validity of the CD assumption. We find that the CD specification performs reasonably...... well for the purposes of cross-country productivity accounting....

  18. Measuring Clinical Productivity.

    Science.gov (United States)

    Hudson, Mark E; Lebovitz, Evan E

    2018-06-01

    Productivity measurements have been used to evaluate and compare physicians and physician practices. Anesthesiology is unique in that factors outside anesthesiologist control impact opportunity for revenue generation and make comparisons between providers and facilities challenging. This article uses data from the multicenter University of Pittsburgh Physicians Department of Anesthesiology to demonstrate factors influencing productivity opportunity by surgical facility, between department divisions and subspecialties within multispecialty divisions, and by individuals within divisions. The complexities of benchmarking anesthesiology productivity are demonstrated, and the potential value of creating a productivity profile for facilities and groups is illustrated. Copyright © 2018 Elsevier Inc. All rights reserved.

  19. Sustainable hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Block, D.L.; Linkous, C.; Muradov, N.

    1996-01-01

    This report describes the Sustainable Hydrogen Production research conducted at the Florida Solar Energy Center (FSEC) for the past year. The report presents the work done on the following four tasks: Task 1--production of hydrogen by photovoltaic-powered electrolysis; Task 2--solar photocatalytic hydrogen production from water using a dual-bed photosystem; Task 3--development of solid electrolytes for water electrolysis at intermediate temperatures; and Task 4--production of hydrogen by thermocatalytic cracking of natural gas. For each task, this report presents a summary, introduction/description of project, and results.

  20. DESIGN VERSUS PRODUCT DEVELOPMENT?

    Directory of Open Access Journals (Sweden)

    Edu Grieco Mazzini Junior

    2015-03-01

    Full Text Available Design or product development? The questioning in relation to the employment of such terminology dates back to possible misconceptions regarding interpretation and approach them. Therefore, it can be stated that there are differences between these two terms? In this context, we highlight two views concerning the origin of the design. The first character creative and based on pre-industrial revolution, based on projective and methodologies directed towards the practice of designing products. And second, where design is understood as an industrial process: the development of new products includes, besides a creative procedure are developed, and symbolic formal solutions for products, but also a technical procedure based on the definition of the requirements concerning the product engineering. Is this the most widely accepted interpretation? theoretical studies were conducted from interpretations of the concept of the design proposed by the International Council of Societies of Industrial Design – ICSDI (2012, and for the characterization of the process of product development, we sought to develop an analogy between these two terminologies and can be proved that the use of one of terminology will not cause deviations of interpretation, since both deal with the life cycle of the product. The main results obtained until now the definition of design proposed by the ICSID where it is characterized as a creative activity focused on the complete life cycle of products is the more approaches of the concept of product development.

  1. The Internationalisation of Production

    DEFF Research Database (Denmark)

    Yang, Cheng; Madsen, Erik Skov

    2013-01-01

    practice is further analysed in terms of (1) general information of each case company; (2) motivation of production internationalisation of each case company; (3) limitations as SMEs to internationalise production; (4) operational activities during the internationalization; (5) benefits of joint effort......This paper mainly aims to explore how SMEs internationalise their production. Directed by this objective, a new practice adopted by five Danish SMEs to internationalise their production to China is identified, which to our knowledge has never been reported by any of the existing literature. The new...

  2. Optimizing production under uncertainty

    DEFF Research Database (Denmark)

    Rasmussen, Svend

    This Working Paper derives criteria for optimal production under uncertainty based on the state-contingent approach (Chambers and Quiggin, 2000), and discusses po-tential problems involved in applying the state-contingent approach in a normative context. The analytical approach uses the concept...... of state-contingent production functions and a definition of inputs including both sort of input, activity and alloca-tion technology. It also analyses production decisions where production is combined with trading in state-contingent claims such as insurance contracts. The final part discusses...

  3. SMART Product Innovation

    DEFF Research Database (Denmark)

    Cramer-Petersen, Claus L.; Ahmed-Kristensen, Saeema; Li, Xuemeng

    2016-01-01

    . The ambition of The Danish Industry Foundation and The Kata Foundation was to develop a method; a robust and specific approach to ensure that product innovation in Danish enterprises in practice would result in products of the highest quality, producible at lower costs and profitable at competitive prices...... products to our neighboring countries continues to suffer. The customers’ financial capacity has been reduced and cheaper products from Asia and other regions have found their way into our local markets. Competition is fierce – especially pricewise. This was the starting point for the SMART project...

  4. PRODUCT STRUCTURE DIGITAL MODEL

    Directory of Open Access Journals (Sweden)

    V.M. Sineglazov

    2005-02-01

    Full Text Available  Research results of representation of product structure made by means of CADDS5 computer-aided design (CAD system, Product Data Management Optegra (PDM system and Product Life Cycle Management Wind-chill system (PLM, are examined in this work. Analysis of structure component development and its storage in various systems is carried out. Algorithms of structure transformation required for correct representation of the structure are considered. Management analysis of electronic mockup presentation of the product structure is carried out for Windchill system.

  5. Production control system specified quality sausage products

    Directory of Open Access Journals (Sweden)

    A. V. Tokarev

    2016-01-01

    Full Text Available The problem of management of production target in technological system of production of sausages of the set quality is considered in article. Decomposition of technological system is considered. Functions of management are allocated: formation of an optimum compounding of forcemeat, expert analysis of a compounding, laboratory analysis of a compounding and its statement. Information technology of interaction of these functions is offered. The mathematical problem definition of finding of an optimum compounding meat product with use of possible substitutes of ingredients is presented. This mathematical problem is a classical linear programming problem whose solution has the standard program. Since the manufacture of the finished product are various nonlinear effects are taken into account at the present time it is practically impossible, the methodology provided in this operation "Expert analysis of the formulation" and "Laboratory analysis of the finished product." An example of calculating the optimum alternative base recipe "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. For an alternative formulation demands were made at a cost of meat, the ingredient composition, as well as the final product organoleptic and physic-chemical indicators should comply with regulatory requirements "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. Indicator acid activity (pH calculated stuffing formulation should be in the range 6.0-6.3. As a partial replacement for the main raw material have been proposed acceptable substitutes. It was necessary to calculate on the basis of the formulation "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002 optimal price and quality alternative formulation. As a result of depreciation of the value of alternative stuffing recipe was 14,5 % when all of the restrictions on the consumer properties. The proposed information technology implemented in the software package "Multi

  6. Les semences d’arachide en milieu paysannal africain : éléments pour une organisation de la filière

    Directory of Open Access Journals (Sweden)

    Schilling Robert

    2001-09-01

    Full Text Available L’arachide tient une place de choix dans les systèmes agraires africains, notamment en zone de savane, en rotation ou en association avec le vivrier de base. L’approvisionnement en semences, dans ce cadre caractérisé par le mode de production paysannal, revêt une importance stratégique et constitue un préalable indispensable à toute action d’amélioration de la filière. Les systèmes semenciers « arachide » dans la sous-région sont rarement efficaces, faute d’avoir su trouver une alternative aux systèmes monopolistiques ou para-étatiques, d’ailleurs coûteux et en général peu performants, mis en place dans la période qui a suivi les indépendances puis supprimés dans la décennie 80-90. Le contexte de libéralisation économique qui prévaut aujourd’hui conduit à préconiser le désengagement de l’État et la participation active d’opérateurs semenciers privés, mais aucun dispositif fondé sur ces principes n’a encore fait ses preuves. Il en résulte, sur le terrain, un vide structurel qui vient aggraver le déficit chronique en semences. Le débat qui s’est engagé sur ce thème se limite par trop aux aspects et aux opérateurs institutionnels, sous-estimant le rôle de l’agriculteur lui-même. La présente étude tente de faire le point et de dégager des orientations générales, le problème se posant d’ailleurs dans les mêmes termes dans d’autres régions et pour d’autres cultures (soja, haricot qui appellent des solutions du même type. Les systèmes et les techniques de multiplication/conservation/diffusion de semences d’arachide, tels qu’ils ont été définis et mis en oeuvre en Afrique de l’Ouest et principalement au Sénégal, ont été présentés dans un précédent article [1] et étudiés lors d’un atelier régional tenu en mars 2001 [2]. Une enquête a été conduite par la FAO et le Coraf (Conseil ouest et centre africain pour la recherche et le développement agricoles

  7. Industrial production of products like petroleum

    Energy Technology Data Exchange (ETDEWEB)

    Baurier, P J.H.

    1925-02-25

    This invention has as its object a process for separating tars, oils, or gases coming from the distillation of carbonaceous materials, such as lignities or shales, to separate all other substances of the same kind and to prepare products like petroleum. The process for present consideration consists essentially in achieving simultaneously hydrogenation of the material (treated for conversion to stable products) and desulfurization of the materials showing the following characteristics: The substances to be treated are fed in the gaseous state, as vapors or pulverized and made to react at a temperature of 300 to 450/sup 0/C in the presence of excess water vapor, on divided metals capable of decomposing the water with release of hydrogen, at a temperature below 450/sup 0/C.

  8. Recombinant organisms for production of industrial products

    Science.gov (United States)

    Adrio, Jose-Luis

    2010-01-01

    A revolution in industrial microbiology was sparked by the discoveries of ther double-stranded structure of DNA and the development of recombinant DNA technology. Traditional industrial microbiology was merged with molecular biology to yield improved recombinant processes for the industrial production of primary and secondary metabolites, protein biopharmaceuticals and industrial enzymes. Novel genetic techniques such as metabolic engineering, combinatorial biosynthesis and molecular breeding techniques and their modifications are contributing greatly to the development of improved industrial processes. In addition, functional genomics, proteomics and metabolomics are being exploited for the discovery of novel valuable small molecules for medicine as well as enzymes for catalysis. The sequencing of industrial microbal genomes is being carried out which bodes well for future process improvement and discovery of new industrial products. PMID:21326937

  9. Recombinant organisms for production of industrial products.

    Science.gov (United States)

    Adrio, Jose-Luis; Demain, Arnold L

    2010-01-01

    A revolution in industrial microbiology was sparked by the discoveries of ther double-stranded structure of DNA and the development of recombinant DNA technology. Traditional industrial microbiology was merged with molecular biology to yield improved recombinant processes for the industrial production of primary and secondary metabolites, protein biopharmaceuticals and industrial enzymes. Novel genetic techniques such as metabolic engineering, combinatorial biosynthesis and molecular breeding techniques and their modifications are contributing greatly to the development of improved industrial processes. In addition, functional genomics, proteomics and metabolomics are being exploited for the discovery of novel valuable small molecules for medicine as well as enzymes for catalysis. The sequencing of industrial microbal genomes is being carried out which bodes well for future process improvement and discovery of new industrial products. © 2010 Landes Bioscience

  10. Volatile products controlling Titan's tholins production

    KAUST Repository

    Carrasco, Nathalie

    2012-05-01

    A quantitative agreement between nitrile relative abundances and Titan\\'s atmospheric composition was recently shown with a reactor simulating the global chemistry occurring in Titan\\'s atmosphere (Gautier et al. [2011]. Icarus, 213, 625-635). Here we present a complementary study on the same reactor using an in situ diagnostic of the gas phase composition. Various initial N 2/CH 4 gas mixtures (methane varying from 1% to 10%) are studied, with a monitoring of the methane consumption and of the stable gas neutrals by in situ mass spectrometry. Atomic hydrogen is also measured by optical emission spectroscopy. A positive correlation is found between atomic hydrogen abundance and the inhibition function for aerosol production. This confirms the suspected role of hydrogen as an inhibitor of heterogeneous organic growth processes, as found in Sciamma-O\\'Brien et al. (Sciamma-O\\'Brien et al. [2010]. Icarus, 209, 704-714). The study of the gas phase organic products is focussed on its evolution with the initial methane amount [CH 4] 0 and its comparison with the aerosol production efficiency. We identify a change in the stationary gas phase composition for intermediate methane amounts: below [CH 4] 0=5%, the gas phase composition is mainly dominated by nitrogen-containing species, whereas hydrocarbons are massively produced for [CH 4] 0>5%. This predominance of N-containing species at lower initial methane amount, compared with the maximum gas-to solid conversion observed in Sciamma-O\\'Brien et al. (2010) for identical methane amounts confirms the central role played by N-containing gas-phase compounds to produce tholins. Moreover, two protonated imines (methanimine CH 2NH and ethanamine CH 3CHNH) are detected in the ion composition in agreement with Titan\\'s INMS measurements, and reinforcing the suspected role of these chemical species on aerosol production. © 2012 Elsevier Inc.

  11. Questionnaire typography and production.

    Science.gov (United States)

    Gray, M

    1975-06-01

    This article describes the typographic principles and practice which provide the basis of good design and print, the relevant printing processes which can be used, and the graphic designer's function in questionnaire production. As they impose constraints on design decisions to be discussed later in the text, the various methods of printing and production are discussed first.

  12. Product line design

    Czech Academy of Sciences Publication Activity Database

    Anderson, S. P.; Celik, Levent

    2015-01-01

    Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 R&D Projects: GA ČR(CZ) GA15-22540S Institutional support: PRVOUK-P23 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

  13. Training for Productivity.

    Science.gov (United States)

    Maglen, Leo; Hopkins, Sonnie; Burke, Gerald

    An exploratory study was conducted to evaluate the utility of a method to demonstrate that Australian enterprises that invest in the training of their employees gain a return from that investment through an increase in employee productivity. The method, which compares enterprise expenditure on training of personnel with labor productivity across a…

  14. Marketing Novel Fruit Products

    NARCIS (Netherlands)

    ’T Riet, Van Jonathan; Onwezen, M.C.; Bartels, Jos; Lans, Van Der I.A.; Kraszewska, Magdalena

    2016-01-01

    The purpose of this study was to compare the influence of four different marketing claims and price information on consumers’ product choices for novel fruits and novel fruit products, using a choice experiment. In total, 1,652 people in Greece (n = 400), the Netherlands (n = 419), Poland (n =

  15. Heavy-Quark Production

    CERN Document Server

    Frixione, Stefano; Nason, Paolo; Ridolfi, Giovanni

    1997-01-01

    We review the present theoretical and experimental status of heavy quark production in high-energy collisions. In particular, we cover hadro- and photoproduction at fixed target experiments, at HERA and at the hadron colliders, as well as aspects of heavy quark production in e+e- collisions at the Z0 peak.

  16. Products from cottonseed

    Energy Technology Data Exchange (ETDEWEB)

    Glushenkova,

    1977-01-01

    A review with 41 references is made on the manufacture of oil, protein, and other products from cottonseed, the effects of gossypol on protein yield and quality and technology of gossypol removal. A process eliminating thermal treatment of the kernels and permitting the production of oil, proteins, phytin, gossypol, sugar, sterols, phosphatides, tocopherols, and residual shells and bagasse is described.

  17. Productivity and energy efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Lovins, H. [Rocky Mountain Inst., Snowmass, CO (United States)

    1995-12-31

    Energy efficient building and office design offers the possibility of significantly increased worker productivity. By improving lighting, heating and cooling, workers can be made more comfortable and productive. An increase of 1 percent in productivity can provide savings to a company that exceed its entire energy bill. Efficient design practices are cost effective just from their energy savings. The resulting productivity gains make them indispensable. This paper documents eight cases in which efficient lighting, heating, and cooling have measurably increased worker productivity, decreased absenteeism, and/or improved the quality of work performed. They also show that efficient lighting can measurably increase work quality by removing errors and manufacturing defects. The case studies presented include retrofit of existing buildings and the design of new facilities, and cover a variety of commercial and industrial settings. Each case study identifies the design changes that were most responsible for increased productivity. As the eight case studies illustrate, energy efficient design may be one of the least expensive ways for a business to improve the productivity of its workers and the quality of its product. (author). 15 refs.

  18. Product Placement in Cartoons

    Directory of Open Access Journals (Sweden)

    Irena Oroz Štancl

    2014-06-01

    Full Text Available Product placement is a marketing approach for integrating products or services into selected media content. Studies have shown that the impact of advertising on children and youth are large, and that it can affect their preferences and attitudes. The aim of this article is to determine the existing level of product placement in cartoons that are broadcast on Croatian television stations. Content analysis of cartoons in a period of one month gave the following results: in 30% of cartoons product placement was found; most product placement were visual ads, in 89%, however, auditory product placement and plot connection was also found. Most ads were related to toys and it is significant that even 65% of cartoons are accompanied by a large amount of products available on the Croatian market. This is the result of two sales strategies: brand licensing (selling popular cartoon characters to toys, food or clothing companies and cartoon production based on existing line of toys with the sole aim of making their sales more effective.

  19. Upgrading uncompetitive products economically

    DEFF Research Database (Denmark)

    Lu, Hua; Jensen, Christian Søndergaard

    2012-01-01

    for upgrading an uncompetitive product, and combine the solutions into a single solution. We also propose a spatial join-based solution that assumes P and T are indexed by an R-tree. Given a set of products in the same R-tree node, we derive three lower bounds on their upgrading costs. These bounds are employed...

  20. Green product innovation strategy

    NARCIS (Netherlands)

    Driessen, P.H.

    2005-01-01

    Over the last decades, companies have started to incorporate green issues in product innovation strategies. This dissertation studies green product innovation strategy, its antecedents and its outcomes. A three-stage approach is followed. In the first stage, the topic is explored and a preliminary

  1. Interleaved Product LDPC Codes

    OpenAIRE

    Baldi, Marco; Cancellieri, Giovanni; Chiaraluce, Franco

    2011-01-01

    Product LDPC codes take advantage of LDPC decoding algorithms and the high minimum distance of product codes. We propose to add suitable interleavers to improve the waterfall performance of LDPC decoding. Interleaving also reduces the number of low weight codewords, that gives a further advantage in the error floor region.

  2. Production (information sheets)

    NARCIS (Netherlands)

    2007-01-01

    Documentation sheets: Geo energy 2 Integrated System Approach Petroleum Production (ISAPP) The value of smartness 4 Reservoir permeability estimation from production data 6 Coupled modeling for reservoir application 8 Toward an integrated near-wellbore model 10 TNO conceptual framework for "E&P

  3. Spectra and strangeness production

    International Nuclear Information System (INIS)

    Miake, Yasuo.

    1990-01-01

    Particle production (π ± , K ± and p ± ) has been measured in p + A and Si + A reactions using the E802 spectrometer. The comparison of the particle production (rapidity distributions, momentum distributions, and the integrated yields ratios) between p + Be, p + Au and central Si + Au collisions and the effects of rescattering is discussed. 14 refs., 6 figs

  4. Marketing technologically advanced products

    NARCIS (Netherlands)

    Bender, Horst

    1989-01-01

    This paper calls for a merger of technology and marketing under a customer value perspective; for an enhancement of the traditional technological innovation orientation of the technology-based firm with a market thrust. It establishes technology-based products as product-service offerings that are

  5. Accelerated product development

    NARCIS (Netherlands)

    Langerak, F.; Seth, J.N.; Malhotra, N.K.

    2011-01-01

    Accelerated product development is a competitive strategy that seeks to reduce the development cycle time of new products. However, there has been little theoretical advancement and empirical model testing in the identification of the conditions under which cycle time reduction is appropriate, the

  6. Global product development

    DEFF Research Database (Denmark)

    Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

    2016-01-01

    Selecting key performance indicators in conventional product development is a challenging task for project management and is compound by global product development. Informed from the findings of two in depth case studies conducted with large Danish manufacturing companies, in this paper we develo...

  7. Production process of VE

    International Nuclear Information System (INIS)

    1987-07-01

    This book tells of synopsis of production process of VE(value engineering), object selection method and establishment of target, collection of object information, design of function, write improvement suggestion, evaluation of improvement suggestion, all sorts of worksheets of production process of VE, explanation of IE, explanation of PERT.

  8. Improved wound care product

    DEFF Research Database (Denmark)

    2012-01-01

    The present invention pertains to use of sodium diacetate (NaHAc 2) as an antimicrobial agent against bacteria growing in biofilms. The aspects of the invention include a wound care product comprising sodium diacetate, a kit comprising a wound care product,and a methodof treating an infected wound....

  9. Productivity of Stream Definitions

    NARCIS (Netherlands)

    Endrullis, Jörg; Grabmayer, Clemens; Hendriks, Dimitri; Isihara, Ariya; Klop, Jan

    2007-01-01

    We give an algorithm for deciding productivity of a large and natural class of recursive stream definitions. A stream definition is called ‘productive’ if it can be evaluated continuously in such a way that a uniquely determined stream is obtained as the limit. Whereas productivity is undecidable

  10. The Productive Programmer

    CERN Document Server

    Ford, Neal

    2009-01-01

    Anyone who develops software for a living needs a proven way to produce it better, faster, and cheaper. The Productive Programmer offers critical timesaving and productivity tools that you can adopt right away, no matter what platform you use. Master developer Neal Ford details ten valuable practices that will help you elude common traps, improve your code, and become more valuable to your team.

  11. COMPETITIVE PRODUCT ADVANTAGES

    Directory of Open Access Journals (Sweden)

    Adrian MICU

    2006-01-01

    Full Text Available Cost advantages may be either internal or external. Internal economics of scope, scale, or experience, and external economies of focus or logistical integration, enable a company to produce some products at a lower cost than the competition. The coordination of pricing with suppliers, although not actually economizing resources, can improve the efficiency of pricing by avoiding the incrementalization of a supplier's nonincremental fixed costs and profit. Any of these strategies can generate cost advantages that are, at least in the short run, sustainable. Even cost advantages that are not sustainable, however, can generate temporary savings that are often the key to building more sustainable cost or product advantages later.. Even when a product's physical attributes are not readily differentiable, opportunities to develop product advantages remain. The augmented product that customers buy is more than the particular product or service exchanged. It includes all sorts of ancillary services and intangible relationships that make buying thesame product from one company less difficult, less risky, or more pleasant than buying from a competitor. Superior augmentation of the same basic product can add substantial value in the eyes of consumers, leading them to pay willingly what are often considerable price premiums.

  12. Tanzania : Productive Jobs Wanted

    OpenAIRE

    World Bank Group

    2014-01-01

    Over the past 18 months, the World Bank has been working on a comprehensive plan to address the challenge of productive jobs in Tanzania. This study represents a step towards a better understanding of how to promote job creation in Tanzania. Indeed, the growth of productive jobs is vital for alleviating poverty and promoting shared prosperity - two important goals of Tanzania's economic st...

  13. Risks of Leveraged Products

    NARCIS (Netherlands)

    A. Di Cesare (Antonio)

    2012-01-01

    textabstractLeveraged investments have become a fundamental feature of modern economies. The new financial products allow people to take greater-than-usual exposures to risk factors. This thesis analyzes several different aspects of the risks involved by some frequently used leveraged products:

  14. Quarkonia production at CDF

    International Nuclear Information System (INIS)

    Demina, R.

    1996-08-01

    We present the results of J/ψ, ψ', χ c and Υ(1S), Υ(2S), Υ(3S) production in the proton-antiproton collisions at √s = 1800 GeV measured with the CDF Detector. Contributions of different production mechanisms are discussed. 10 refs., 7 figs

  15. Optimal Product Placement.

    Science.gov (United States)

    Hsu, Chia-Ling; Matta, Rafael; Popov, Sergey V; Sogo, Takeharu

    2017-01-01

    We model a market, such as an online software market, in which an intermediary connects sellers and buyers by displaying sellers' products. With two vertically-differentiated products, an intermediary can place either: (1) one product, not necessarily the better one, on the first page, and the other hidden on the second page; or (2) both products on the first page. We show that it can be optimal for the intermediary to obfuscate a product-possibly the better one-since this weakens price competition and allows the sellers to extract a greater surplus from buyers; however, it is not socially optimal. The choice of which one to obfuscate depends on the distribution of search costs.

  16. Product Architecture Modularity Strategies

    DEFF Research Database (Denmark)

    Mikkola, Juliana Hsuan

    2003-01-01

    The focus of this paper is to integrate various perspectives on product architecture modularity into a general framework, and also to propose a way to measure the degree of modularization embedded in product architectures. Various trade-offs between modular and integral product architectures...... and how components and interfaces influence the degree of modularization are considered. In order to gain a better understanding of product architecture modularity as a strategy, a theoretical framework and propositions are drawn from various academic literature sources. Based on the literature review......, the following key elements of product architecture are identified: components (standard and new-to-the-firm), interfaces (standardization and specification), degree of coupling, and substitutability. A mathematical function, termed modularization function, is introduced to measure the degree of modularization...

  17. Thermophilic Biohydrogen Production

    DEFF Research Database (Denmark)

    Karakashev, Dimitar Borisov; Angelidaki, Irini

    2011-01-01

    Dark fermentative hydrogen production at thermophilic conditions is attractive process for biofuel production. From thermodynamic point of view, higher temperatures favor biohydrogen production. Highest hydrogen yields are always associated with acetate, or with mixed acetate- butyrate type...... fermentation. On the contrary the hydrogen yield decreases, with increasing concentrations of lactate, ethanol or propionate. Major factors affecting dark fermentative biohydrogen production are organic loading rate (OLR), pH, hydraulic retention time (HRT), dissolved hydrogen and dissolved carbon dioxide...... concentrations, and soluble metabolic profile (SMP). A number of thermophilic and extreme thermophilic cultures (pure and mixed) have been studied for biohydrogen production from different feedstocks - pure substrates and waste/wastewaters. Variety of process technologies (operational conditions...

  18. Production measurements at LHCb

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00392425

    2017-01-01

    The $\\text{LHC}b$ detector, with its excellent momentum resolution and flexible trigger strategy, is ideally suited for measuring heavy quark and quarkonia production properties. In addition, the new system of forward shower counters installed upstream and downstream has begun to be used, therefore the experiment is being suited to measure central exclusive production. The $\\text{LHC}b$ measurements of inclusive and differential cross-sections of the production of $J/\\psi$ resonance and $J/\\psi$ pairs, as well bottom quarks and $Z^0$ boson, based on Run 2 datasets are summarized. Finally, results on the prompt production of open charm hadrons and the exclusive production of charmonium are discussed.

  19. Hydrogen production by Cyanobacteria

    Directory of Open Access Journals (Sweden)

    Chaudhuri Surabhi

    2005-12-01

    Full Text Available Abstract The limited fossil fuel prompts the prospecting of various unconventional energy sources to take over the traditional fossil fuel energy source. In this respect the use of hydrogen gas is an attractive alternate source. Attributed by its numerous advantages including those of environmentally clean, efficiency and renew ability, hydrogen gas is considered to be one of the most desired alternate. Cyanobacteria are highly promising microorganism for hydrogen production. In comparison to the traditional ways of hydrogen production (chemical, photoelectrical, Cyanobacterial hydrogen production is commercially viable. This review highlights the basic biology of cynobacterial hydrogen production, strains involved, large-scale hydrogen production and its future prospects. While integrating the existing knowledge and technology, much future improvement and progress is to be done before hydrogen is accepted as a commercial primary energy source.

  20. Health products inspection

    International Nuclear Information System (INIS)

    Stoltz, M.

    2009-01-01

    To protect public health, the Health Products Inspection is a public service mission where the application of regulations concerning activities on human health products and cosmetic products is verified. This mission permits a global approach to assess the health products risk-based benefit and, in monitoring by laboratory testing and by on site inspections, to verify their compliance with appropriate regulations. The seventy five inspectors perform about eight hundred inspections per year, in France and abroad. These inspections are related to data provided in the health products assessment and also to manufacturing and delivery practices. The French inspection body is also involved in the training of foreign inspectors and in the harmonization of national, European and international practices either for operators than for the competent authorities. (author)