WorldWideScience

Sample records for sous haute pression

  1. Composes inter-halogenes sous pression: etude des transformations structurales dans le monobromure d'iode sous forme dense

    Science.gov (United States)

    Bouchard, Alexandre

    La famille des composes halogenes et inter-halogenes representent des solides moleculaires adoptant des phases denses communes avec des solides moleculaires diatomiques comme l'azote et l'hydrogene. Parmi les transformations structurales et electroniques induites sous haute pression et observees dans ces solides, on note, entre autres, la dissociation moleculaire et la metallisation. De plus, l'etude des phases denses de l'iode a permis recemment l'observation d'une structure cristalline possedant une modulation dite incommensurable, c'est-a-dire une modulation possedant une periodicite differente de celle de la structure cristalline, jetant ainsi une lumiere nouvelle sur le processus de dissociation moleculaire dans les solides halogenes. Dans ce memoire, on propose d'etudier les changements structuraux dans monobromure d'iode (IBr), un compose inter-halogene possedant des proprietes structurales semblables a celles de deux composes halogenes, soit l'iode (I 2) et le brome (Br2) sous leur forme solide. Des experiences de diffraction des rayons X de poudres en utilisant un rayonnement synchrotron ont ete realisees a temperature ambiante sur l'IBr en variant la pression jusqu'aux environs de 60 GPa. La nature chimique particuliere du compose IBr a necessite la mise au point de techniques de chargement d'echantillon destinees a preserver l'integrite chimique de la substance utilisee. On rapporte egalement l'observation d'une phase de l'IBr presentant une modulation incommensurable. Les phases observees dans l'IBr permettent d'etablir des paralleles avec les phases denses rapportees dans I2 et Br2 par le biais d'un modele phenomenologique decrivant la sequence structurale des solides halogenes sous forme condensee.

  2. High pressure experimental water loop; Cellule experimentale a eau sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Grenon, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Terny, M [Societe Grenobloise d' Etudes et d' Applications Hydrauliques, 38 (France)

    1958-07-01

    , deux cyclones, l'un decanteur et l'autre separateur de gaz, et un echangeur a tubes; sur ce circuit principal est monte en derivation un circuit de purification continue avec detendeurs et pot de resines devant permettre en plus l'etude de la tenue des resines a la pression et a la temperature; a la sortie du cyclone degazeur est branche un circuit de gaz destine a l'etude de la recombinaison des gaz de radiolyse en phase vapeur. Le circuit de resines, le circuit de gaz, ainsi que divers petits circuits de prelevement reviennent tous a un circuit de stockage basse pression; une pompe de relevage, refoulant sous 160 kg/cm{sup 2} et asservie au niveau dans le pressuriseur, reinjecte en permanence de l'eau du circuit basse pression au circuit principal. Cette cellule constitue un banc d'essai egalement pour le materiel etanche a haute pression. La pompe de circulation et les brides de raccordement (du type Oak Ridge) sont etanches; la pompe d'alimentation et les detendeurs ne sont pas etanches; des vannes etanches sont a l'essai, les autres vannes non etanches comportent une recuperation des fuites. Un systeme detecteur de fuites d'un principe analogue a celui utilise sur la pile americaine HRT a ete monte sur ce circuit et permet un controle permanent de l'etancheite. (auteur)

  3. PH measurement under pressure and at high temperatures; Mesure du pH sous pression et a temperature elevee

    Energy Technology Data Exchange (ETDEWEB)

    Fournie, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Le Peintre, M; Mahieu, C [Centre National de la Recherche Scientifique (CNRS), 91 - Gif-sur-Yvette (France)

    1961-07-01

    In the first part the development and operation of a glass electrode under pressure at room temperature is described. The pressure equilibrium between the inside and outside of the glass membrane several centimetres thick is obtained instantaneously by means of a siphon. The use of a silicone oil as electrical insulator makes possible the working of the glass electrode with the siphon at high pressures (100 kg/cm{sup 2}). In the second part, we determined the pH of various buffer solutions up to 250 deg. C using a cell of our design having two hydrogen electrodes. The values thus obtained for the buffer solutions make it possible to verify and calibrate the pH electrodes independently of the oxido-reduction potential of the medium. In the third part we give the results obtained up to 200 deg. C with the glass electrodes developed in conjunction with the Societe St Gobain. (author) [French] Dans une premiere partie, nous exposons la mise au point et le fonctionnement d'une electrode en verre sous pression a la temperature ordinaire. L'equilibrage instantane de la pression a l'interieur et a l'exterieur de la membrane en verre de quelques diziemes de millimetres d'epaisseur s'effectue par l'intermediaire d'un siphon. L'emploi d'une huile de silicone comme isolant electrique a permis le fonctionnement de l'electrode en verre a siphon sous haute pression (1000 kg/cm{sup 2}). Dans une deuxieme partie, nous avons determine jusqu'a 250 deg. C les valeurs du pH des diverses solutions tampons avec une cellule de notre conception a deux electrodes d'hydrogene. Les valeurs des solutions tampons ainsi obtenues permettent de verifier et d'etalonner les electrodes a pH independantes du potentiel d'oxydo-reduction du milieu. Dans une troisieme partie, nous relatons les resultats obtenus jusqu'a 200 deg. C avec les electrodes en verre mis au point en collaboration avec la Societe Saint-Gobain. (auteur)

  4. Fuel elements for pressurised-gas reactors; Elements combustibles des piles a gaz sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J A; Englander, M; Gauthron, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The design and fabrication of fuel elements for the first CO{sub 2} pressurized reactors have induced to investigate: various cladding materials, natural uranium base fuels, canning processes. The main analogical tests used in connection with the fuel element study are described. These various tests have enabled, among others, the fabrication of the fuel element for the EL2 reactor. Lastly, future solutions for electrical power producing reactors are foreseen. (author)Fren. [French] L'etude et la realisation d'elements combustibles pour les premieres piles a CO{sub 2} sous pression ont conduit a examiner: les divers materiaux de gaine, les combustibles a base d'uranium naturel, les modes de gainage. Les principaux essais analogiques ayant servi au cours de l'etude de la cartouche sont decrits. Ces divers essais ont notamment permis la realisation de la cartouche de la pile EL2. Enfin sont envisagees les solutions futures pour les piles productrices d'energie electrique. (auteur)

  5. Metal extrusion using hydrostatic pressures; Le filage des metaux sous pression hydrostatique

    Energy Technology Data Exchange (ETDEWEB)

    Sauve, Ch [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The main problems connected with the deformation of metals due to extrusion are described. A method is put forward for calculating the rational rate of percentage deformation in the case of bar extrusion using a cylindrical container; reference is made to previous work on extrusion using a hydrostatic pressure with or without back-pressure. An extrusion process is described using hydrostatic pressure, without back-pressure, and using the lubricant for transmitting the thrust. This process has been used for eight years by the C.E.A. for the extrusion of a very wide range of metals, from beryllium to uranium and including steels; it leads to excellent surface textures. A very fine crystallization can be obtained on extruded products when the rate of extrusion is very low. There appears to be nothing against the use of high extrusion rates using this method. (author) [French] On expose les problemes generaux lies a la deformation des metaux par filage. On propose un calcul de la vitesse rationnelle de deformation pour cent dans le cas du filage de barres a partir d'un conteneur cylindrique, et l'on cite les travaux anterieurs sur le filage par faction d'une pression hydrostatique sans ou avec une contre-pression. On decrit un procede de filage par l'action d'une pression hydrostatique, sans contre-pression, utilisant le lubrifiant pour transmettre la poussee. Ce procede employe depuis 8 ans au C.E.A. pour filer les metaux les plus divers, depuis le beryllium jusqu'a l'uranium en passant par les aciers, permet d'obtenir d'excellents etats de surface. Une cristallisation tres fine peut etre obtenue sur les produits files lorsque le filage est tres lent. Rien ne parait s'opposer a ce que des filages rapides soient effectues avec cette methode. (auteur)

  6. Performance of Cubic Eos At High Pressures Performance des équations d'état cubiques à hautes pressions

    Directory of Open Access Journals (Sweden)

    Stamataki S.

    2006-12-01

    dans cette étude : les données expérimentales d'équilibre liquide-vapeur (ELV, les données compositionnelles et volumétriques issues d'équilibres isothermes jusqu'à 4000 bar pour les mélanges binaires, les données PVT jusqu'à 2000 bar pour des mélanges binaires et des systèmes synthétiques multicomposants. Des corrélations et des résultats prévisionnels sont présentés à partir de l'équation de Peng-Robinson (t-mPR translatée et modifiée. Il est montré que l'on rencontre de sérieux problèmes à haute pression dans le cas où l'on utilise des coefficients d'interaction extrapolés. Les prévisions des pressions de saturation des gaz à condensats sont plus satisfaisantes lorsque les paramètres d'interaction binaire sont obtenus à partir d'une corrélation des points de rosée à haute pression. Les prévisions concernant les volumes et les compositions sont remarquables à condition que l'on définisse les paramètres des équations d'état sur la base des données ELV binaires. Des résultats contradictoires sont obtenus avec différentes méthodes dans l'estimation des propriétés critiques des hydrocarbures de poids moléculaires élevés. Les expressions généralisées pour la translation de volume apparaissent comme très efficaces même à très hautes températures et très hautes pressions (jusqu'à 2000 bar.

  7. Oxidation of steel heated in CO{sub 2} medium under pressure; Oxydation d'un acier ordinaire chauffe dans le gaz carbonique sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R.; Leclercq, D.; Bunard, C. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Behaviour of low-alloyed steels heated in CO{sub 2} medium under pressure is reported. Tests are carried out in the range of erature reached in the CO{sub 2} cooled reactors (vessel, thermal shield, pipes). The observed weight increases are small, even after more than a thousand hours of heating at 350 deg. C, but oxidation curve looks like progressing linearly. Furthermore, the oxide formed under a pressure of 15 kg/cm{sup 2} is undoubtedly more compact and adherent than the one formed under a pressure of 1 kg/cm{sup 2}. Finally, for practical use, CO{sub 2} steel pipes surface has to be sand blast and pickled. A following phosphatizing protects it from atmospheric corrosion during assembling, but these treatments have no influence on the behaviour of these steels heated in CO{sub 2}. (author)Fren. [French] On etudie le comportement d'aciers au carbone faiblement allies, chauffes dans le gaz carbonique sous pression, aux temperatures atteintes dans les reacteurs refroidis par ce gaz (caisson, bouclier thermique, canalisations). Les augmentations de poids observees sont faibles, meme apres plus de 1000 heures de chauffage a 350 deg. C, mais l'oxydation semble se poursuivre lineairement. De plus, l'oxyde forme dans le gaz carbonique sous pression de 15 kg/cm{sup 2} est nettement plus compact et adherent que celui forme sous pression atmospherique de gaz carbonique. Enfin, dans la pratique, les surfaces d'acier du circuit de gaz carbonique sont necessairement sablees ou decapees; une phosphatation ulterieure le protege de la corrosion atmospherique pendant le montage. Ces traitements sont sans influence sur le comportement de ces aciers dans le gaz carbonique a chaud. (auteur)

  8. Oxidation of steel heated in CO{sub 2} medium under pressure; Oxydation d'un acier ordinaire chauffe dans le gaz carbonique sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R; Leclercq, D; Bunard, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Behaviour of low-alloyed steels heated in CO{sub 2} medium under pressure is reported. Tests are carried out in the range of erature reached in the CO{sub 2} cooled reactors (vessel, thermal shield, pipes). The observed weight increases are small, even after more than a thousand hours of heating at 350 deg. C, but oxidation curve looks like progressing linearly. Furthermore, the oxide formed under a pressure of 15 kg/cm{sup 2} is undoubtedly more compact and adherent than the one formed under a pressure of 1 kg/cm{sup 2}. Finally, for practical use, CO{sub 2} steel pipes surface has to be sand blast and pickled. A following phosphatizing protects it from atmospheric corrosion during assembling, but these treatments have no influence on the behaviour of these steels heated in CO{sub 2}. (author)Fren. [French] On etudie le comportement d'aciers au carbone faiblement allies, chauffes dans le gaz carbonique sous pression, aux temperatures atteintes dans les reacteurs refroidis par ce gaz (caisson, bouclier thermique, canalisations). Les augmentations de poids observees sont faibles, meme apres plus de 1000 heures de chauffage a 350 deg. C, mais l'oxydation semble se poursuivre lineairement. De plus, l'oxyde forme dans le gaz carbonique sous pression de 15 kg/cm{sup 2} est nettement plus compact et adherent que celui forme sous pression atmospherique de gaz carbonique. Enfin, dans la pratique, les surfaces d'acier du circuit de gaz carbonique sont necessairement sablees ou decapees; une phosphatation ulterieure le protege de la corrosion atmospherique pendant le montage. Ces traitements sont sans influence sur le comportement de ces aciers dans le gaz carbonique a chaud. (auteur)

  9. Texturation à froid sous contraintes triaxiales de phase à haute T_c de Bi(Pb)SrCaCuO préréagie

    Science.gov (United States)

    Langlois, P.; Massat, H.; Suryanarayanan, R.

    1994-11-01

    The alignment of grains in isostatically precompacted samples of prereacted Bi{1,8}Pb{0,4}Sr{2,0}Ca{2,2}Cu{3,0}O{10,3 + x} powder has been achieved by compressive plastic deformation under isostatic pressure at room temperature. Isostatic pressures were in the range 0.1 to 1 GPa and deformation rates were led up to 57 %. Prior to sintering, X-ray diffraction measurements corroborate an expected high- T_c phase purity of nearly 85 % and indicate that the as-deformed samples have been textured with the (c-axes parallel to the pressing direction whilst a.c. susceptibility measurements ascertain a high transition temperature around 107 K. Intergranular connection does not occur until sintering at 850 ^{circ}C for 80 h and measurements indicate then that the texture has been retained. Superconducting properties themselves show sensitivity to texture through anisotropy-related distinctive irreversibility lines. L'alignement de grains de poudre Bi{1,8}Pb{0,4}Sr{2,0}Ca{2,2}Cu{3,0}O{10,3 + x} préréagie a été réalisé par déformation plastique à température ambiante d'échantillons précompactés isostatiquement et comprimés sous pression isostatique, la gamme des pressions isostatiques allant de 0,1 à 1 GPa et les taux de déformation atteignant 57 %. Les mesures de diffraction de rayons X corroborent la pureté de phase à haute T_c proche de 85 % attendue et indiquent que les échantillons ainsi déformés ont été texturés avec les plans ab perpendiculaires à la direction de compression. Les mesures de susceptibilité alternative avèrent une température élevée de transition à environ 107 K mais la connexion intergranulaire n'est assurée qu'après un frittage à 850 ^{circ}C pendant 80 h dont on vérifie qu'il conserve la texture. Enfin, la sensibilité des propriétés supraconductrices à la texturation est évaluée par le biais de lignes d'irréversibilité distinctes en fonction de l'anisotropie.

  10. Oxidation of ordinary steels or alloys heated in carbon dioxide under pressure; Oxydation d'aciers ordinaires ou allies chauffes dans le gaz carbonique sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Leclercq, D; Chevilliard, C; Darras, R [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Selection tests were carried out on commercial steels from the viewpoint of their resistance to oxidation in carbon dioxide, under 25 atmospheres pressure, between 350 and 600 deg. C. Comparative curve of oxidation kinetics were obtained, from which the influence of various additive elements can be found; small amounts of aluminium particularly seem to be favourable in the case of only slightly alloyed steels. (author) [French] Des essais de selection d'aciers commerciaux ont ete effectues quant a leur resistance a l'oxydation dans le gaz carbonique, sous pression de 25 atmospheres, ente 350 et 600 deg. C. Des courbes comparatives de cinetique d'oxydation ont ete obtenues, ce qui permet de degager l'influence de divers elements d'addition; de faibles teneurs en aluminium apparaissent notamment favorables dans le cas des aciers peu allies. L'acier inoxydable 18-8 a egalement ete etudie, notamment sous forme de tubes minces. Son comportement est bon jusqu'au moins 600 deg. C dans ces conditions. (auteur)

  11. Oxidation of iron and steels by carbon dioxide under pressure (1962); Oxydation du fer et des aciers par l'anhydride carbonique sous pression (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Colombie, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    After having developed one of the first thermo-balances to operate under pressure, we have studied the influence of the pressure on the corrosion of iron and steels by carbon dioxide. The corrosion was followed by three different methods simultaneously: by the oxidation kinetics, by micrographs, and by radiocrystallography. We have been able to show that the influence of the pressure is not negligible and we have provided much experimental evidence: oxidation kinetics, micrographic aspects, surface precipitation of carbon, metal carburization, the texture of the magnetite layer. All these phenomena are certainly modified by changes in the carbon dioxide pressure. In order to interpret most of our results we have been led to believe that the phenomenon of corrosion by CO{sub 2} depends on secondary reactions localised at the oxide-gas interface. This would constitute a major difference between the oxidation by CO{sub 2} and that by oxygen. (author) [French] Apres avoir etudie et mis au point une des premieres thermobalances fonctionnant sous pression, nous avons etudie l'influence de la pression sur la corrosion du fer et des aciers par l'anhydride carbonique. Notre etude a ete conduite simultanement sur trois plans differents: etude des cinetiques d'oxydation, etude micrographique et etude radiocristallographique. Nous avons pu montrer que l'influence de la pression n'etait pas negligeable et nous en avons fourni un faisceau de preuves experimentales important: cinetiques d'oxydation, aspect micrographique, precipitation superficielle de carbone, carburation du metal, texture de la couche de magnetite. Tous ces phenomenes sont sans aucun doute modifies par une variation de pression du gaz carbonique. Pour interpreter la plupart de nos resultats, nous avons ete conduits a penser que le phenomene de corrosion par CO{sub 2} etait tributaire de reactions secondaires localisees a l'interface oxyde-gaz. Ce serait la une des differences fondamentales entre l'oxydation par

  12. Proceedings of the European Symposium on Pressure Equipment - ESOPE 2007; Actes des Journees d'Etudes Europeennes Equipements sous Pression - ESOPE 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    orientations retained for pressure equipments used in the nuclear industry, the European standards and the international collaboration, the Chinese standards and finally the recent developments of the codes and standards of the ASME in the USA. ESOPE 2007 also includes a Poster Session organized in the context of the international exhibition, which allows the companies to present their industrial realizations in parallel to the Symposium. (author) [French] Tous les trois ans, et depuis maintenant trente ans, l AFIAP organise un symposium ou les experts et acteurs oeuvrant dans le domaine des equipements sous pression, qu'ils soient fixes ou transportables, peuvent se rencontrer et echanger sur tous les developpements touchant a leur activite. Ce qui etait dans un premier temps denomme 'Congres national sur la technologie des appareils a pression', puis 'Journees d'etude sur les appareils a pression', est devenu depuis 2001 les 'Journees d'etude Europeennes sur les equipements sous pression' ou encore 'European Symposium on Pressure Equipment' (ESOPE), marquant ainsi une volonte d'ouverture a l'Europe et a l'international dans un contexte marque par la mise en oeuvre des directives europeennes applicables a ces equipements. Les journees 2001 furent plus particulierement consacrees a la mise en oeuvre des directives harmonisant la construction des equipements, et les journees 2004 ont ete plus particulierement axees sur la gestion des equipements en service. Pour le symposium ESOPE 2007, le comite d organisation a souhaite reprendre ces deux themes sous les aspects de la securite et de la competitivite, ainsi que de l'innovation. La seance pleniere du dernier jour sera entierement consacree a ces themes et comportera une Table Ronde ou s'exprimeront des representants nationaux et europeens des pouvoirs publics, des representants des fabricants et utilisateurs, ainsi que des experts engages dans la

  13. Comportement d'un béton à hautes performances à base de laitier ...

    African Journals Online (AJOL)

    L'utilisation de béton à hautes performances (BHP) intégrant des ajouts cimentaires comme les cendres volantes, les fumées de silice ou le laitier hydraulique ... armatures qui sont, à leur tour attaquées. Il est possible de modifier la ... refroidissement brutal par l'eau sous pression, c'est un sable de granulométrie 0/5 mm.

  14. Evolutions structurales et effets de pression dans des céramiques supraconductrices à haute T_c

    Science.gov (United States)

    Gavarri, J. R.; Carel, C.; Monnereau, O.; Vacquier, G.; Vettier, C.; Hewat, A. W.

    1991-11-01

    Using structural evolution data and a method permitting the calculation of elastic constants and Grüneisen parameters, the thermal expansion of two high T_c superconductors is interpreted. It is shown that the superconductors YBaCuO (123) and BiSrCaCuO (2212) present strongly different elastic and anharmonic properties. En appliquant une méthode déjà mise au point sur d'autres composés (Gavarri, 1981), l'évolution structurale de deux supraconducteurs à haute T_c est interprétée par le biais de leurs compressibilités anisotropes et de leurs coefficients de Grüneisen, obtenus par diffraction de neutrons et de rayons X. On montre ici que les supraconducteurs YBaCuO (123) et BiSrCaCuO (2212) diffèrent considérablement par leurs compressibilités anisotropes et par leurs coefficients de Grüneisen.

  15. The Schoonebeek Oilfield: the Rw-2e High Pressure Steam Injection Project Gisement de Schoonebeek : le projet RW-2E d'injection de vapeur à haute pression

    Directory of Open Access Journals (Sweden)

    Holtam V. R.

    2006-11-01

    Full Text Available The daily oil production from the Schoonebeek Oilfield amounts to some 1400 m3 /d, of which ca. 65% is produced from a high pressure (85 bar steam injection project. This project was started in 1981 and originally consisted of 7 structurally downdip/middip steam injectors. However, following the initially somewhat disappointing project performance, steam injection was moved to 4 middip/ updip injectors in 1984. This change in the location of the steam injectors, together with an increase in the level of surveillance and a more pragmatic reservoir management policy, has resulted in improved project performance. The ultimate extra oil/steam ratio for the total project is now expected to be 0. 7 m3 oil/ton of steam injected. La production de pétrole du gisement de Schoonebeek est d'environ 1400 m3/jour, dont près de 65% sont obtenus par injection de vapeur à haute pression (85 bar. Ce projet lancé en 1981 comportait initialement 7 injecteurs de vapeur orientés vers l'aval-pendage. En raison de performances décevantes, l'injection de vapeur a été transférée en 1984 sur 4 injecteurs travaillant vers l'amont-pendage. Ce changement de position des injecteurs, accompagné d'une surveillance renforcée et d'une politique de gestion du gisement plus pragmatique, a donné des résultats favorables. On pense que le rapport pétrole/vapeur pour l'ensemble du projet devrait être en dernière analyse de 0,7 m3 de pétrole par tonne de vapeur injectée.

  16. Measurement of the local void fraction at high pressures in a heating channel; Mesure du taux de vide a haute pression dans un canal chauffant

    Energy Technology Data Exchange (ETDEWEB)

    Martin, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    Void fraction measurements were made in two phase flow boiling systems at high pressures in a uniformly heated, rectangular channel with a high aspect ratio. The local void fraction values were calculated from measurements of the absorption of a thin collimated X-ray beam (2 mm x 0.05 mm). The mean void fraction in a horizontal section results from integration of the local values across the section. At a fixed measuring station the quality and- void fraction were varied by changing the heat flux, flow rate and pressure systematically. Two channels were used differing in length and thickness (150.8 cm x 5.3 cm x 0.2 cm and the significant features of this study are: -1) The void fraction measurements are among the first obtained at such high pressure (80 to 140 kg/cm{sup 2}); -2) In the experimental region under consideration the measurements are systematic and numerous enough to allow accurate interpolations: mass velocity from 50 to 220 g/cm{sup 2}.s, heat flux from 40 to 170 W/cm{sup 2} and calculated steam quality from -0.2 to 0.2; -3) Many tests were performed under local boiling conditions with the mean temperature of the fluid below the saturation temperature; and -4) These results were compared to the predictions of certain models presented in the literature and simple empirical formulae were developed to fit the experimental results. (author) [French] Des mesures de taux de vide ont ete effectuees sur un ecoulement eau-vapeur a haute pression dans un canal vertical, de section rectangulaire tres allongee et chauffe a flux uniforme. Les valeurs du taux de vide local sont obtenues a partir des mesures de l'absorption d'un faisceau de rayons X finement collimate (2 mm x 0,05 mm). La valeur du taux de vide moyen dans une section droite s'en deduit par integration. Cette section droite ou sont realisees les mesures est fixe et, a pression, debit et flux donnes, les variations du titre et du taux de vide sont obtenues par variations de l'enthalpie d'entree. Deux

  17. Study of cements silicate phases hydrated under high pressure and high temperature; Etude des phases silicatees du ciment hydrate sous haute pression et haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Meducin, F.

    2001-10-01

    This study concerns the durability of oil-well cementing. Indeed, in oil well cementing a cement slurry is pumped down the steel casing of the well up the annular space between it and the surrounding rock to support and protect the casing. The setting conditions of pressure and temperature may be very high (up to 1000 bar and 250 deg C at the bottom of the oil-well). In this research, the hydration of the main constituent of cement, synthetic tri-calcium silicate Ca{sub 3}SiO{sub 2}, often called C{sub 3}S (C = CaO; S = SiO{sub 2} and H H{sub 2}O), is studied. Calcium Silicate hydrates are prepared in high-pressure cells to complete their phase diagram (P,T) and obtain the stability conditions for each species. Indeed, the phases formed in these conditions are unknown and the study consists in the hydration of C{sub 3}S at different temperatures, pressures, and during different times to simulate the oil-well conditions. In a first step (until 120 deg C at ambient pressure) the C-S-H, a not well crystallized and non-stoichiometric phase, is synthesized: it brings adhesion and mechanical properties., Then, when pressure and temperature increase, crystallized phases appear such as jaffeite (Ca{sub 6}(Si{sub 2}O{sub 7})(OH){sub 6}) and hillebrandite (Ca{sub 2}(SiO{sub 3})(OH){sub 2}). Silicon {sup 29}Si Nuclear Magnetic Resonance (using standard sequences MAS, CPMAS) allow us to identify all the silicates hydrates formed. Indeed, {sup 29}Si NMR is a valuable tool to determine the structure of crystallized or not-well crystallized phases of cement. The characterization of the hydrated samples is completed by other techniques: X- Ray Diffraction and Scanning Electron Microscopy. The following results are found: jaffeite is the most stable phase at C/S=3. To simulate the hydration of real cement, hydration of C{sub 3}S with ground quartz and with or without super-plasticizers is done. In those cases, new phases appear: kilchoanite mainly, and xonotlite. A large amount of {alpha}-C{sub 2}SH is also produced. Compression tests are done to correlate macroscopic behavior and physico chemical properties of the products. With super-plasticizers, samples porosity is lower and the 28-day aged samples recover the Young modulus they had at the early stage of hydration. (author)

  18. Compatibility of various magnesium alloys with pressurized carbon dioxide at high temperatures; Compatibilite de divers alliages de magnesium avec le gaz carbonique sous pression aux temperatures elevees

    Energy Technology Data Exchange (ETDEWEB)

    Dewanckel, B; David, R; Hulin, C; Leclercq, D [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

    1968-07-01

    This work on the compatibility of magnesium alloys with pressurized carbon dioxide has been carried out along three lines: - testing of special alloys containing additions of zirconium, manganese, cerium, zinc, beryllium and yttrium. The results are satisfactory, generally speaking, and the corrosion kinetics are often comparable to those of conventional magnesium-zirconium alloy; - influence of the quality of the carbon dioxide, in particular the presence of water vapour or of carbon monoxide in this gas. It appears that oxidation is reduced if the carbon dioxide contains traces of water vapour, but is more pronounced if carbon monoxide is also present; - study of certain phenomena related to corrosion: size changes in the samples during tests, structural modifications in the alloys (grain-size changes, formation of a cortical zone in the case of alloys containing zirconium). The influence of thermal cycling has also been studied in a few specific tests. The results obtained make it possible to compare the behaviour of various alloys under varying conditions of long-term use, and to choose, if required, the best composition for a given application. (authors) [French] Ce travail sur la compatibilite des alliages de magnesium avec le gaz carbonique sous pression a ete particulierement oriente dans trois directions: - epreuve, d'alliages speciaux comportant des additions de zirconium, manganese, cerium, zinc, beryllium et yttrium. Les resultats sont generalement satisfaisants et les cinetiques de corrosion souvent comparables a celles de l'alliage magnesium-zirconium classique; - influence de la qualite du gaz carbonique, et notamment de la presence de vapeur d'eau ou d'oxyde de carbone dans ce gaz. Il est apparu que l'oxydation est reduite si le gaz carbonique contient des traces d'eau, mais accrue si l'oxyde de carbone est egalement present; - etude de certains phenomenes lies a la corrosion: variations dimensionnelles des echantillons au cours des essais

  19. Development of a 14-inch ID High-Pressure Hybrid Riser for SBOP Drilling Développement d’un riser hybride 14”ID haute pression pour le forage SBOP

    Directory of Open Access Journals (Sweden)

    Persent E.

    2009-11-01

    pression (10 000 psi pour le forage en offshore ultra profond (10 000 ft avec BOP en surface. Ce système mécanique est obtenu en adaptant et combinant deux technologies préexistantes, développées par l’IFP pour d’autres applications : – les connecteurs Clip, comportant une double rangée de dentures alternées pour procurer un moyen de connexion sûr et rapide des éléments de riser ; – les tubes hybrides, obtenus par frettage circonférentiel de tubes en acier au moyen de rubans constitués de fibres de carbone imprégnées d’une résine polyamide thermoplastique. L’IFP a développé un nouveau connecteur Clip de 355,6 mm (14” de diamètre intérieur pour l’application au riser hybride haute pression. Ce connecteur est capable de supporter une tension axiale de 1270 t et une pression opératoire de 690 bar. Par ailleurs, un tube hybride de 406,4 mm (16” de diamètre extérieur nominal a été dimensionné pour remplacer le tube riser en acier conventionnel par un tube fretté d’épaisseur plus faible, donc plus léger. Le gain de poids significatif ainsi obtenu permet de concevoir un système riser capable de supporter les spécifications de tenue aux fortes pressions et aux grandes profondeurs d’eau. Suite à des études de conception et de dimensionnement, un ensemble prototype de diamètre intérieur 14” a été fabriqué, consistant en deux sections de riser hybride jointes par un connecteur Clip haute pression. Un programme de tests incluant des essais d’éclatement en pression interne et d’écrasement en pression externe, ainsi que des essais de fatigue en traction axiale cyclique, a été défini et réalisé pour qualifier les performances du connecteur Clip et des tubes hybrides. La réalisation d’essais de fatigue complémentaires des tubes hybrides et le test sur champ d’un élément de riser prototype à échelle 1 devraient être les prochaines étapes du projet.Au stade actuel, les résultats des essais (

  20. Heat exchanges in nitrogen and hydrogen boiling under pressure; Echanges thermiques dans l'azote et l'hydrogene bouillant sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Roubeau, P [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1961-07-01

    The heat transfer between a horizontal wall and boiling nitrogen or hydrogen has been studied from atmospheric pressure to 2/3 of the critical pressure. The q = f(T) curves are rather well defined for nitrogen but more uncertain for hydrogen. In general, the measured {delta}T are inferior to those given by various authors using the wire method. The q{sub max} = f(P) more reproducible curves show for both fluids a maximum at about 0.4 P{sub cr} say 45 watt cm{sup -2} for 12.5 atm in nitrogen and 16 watt cm{sup -2} for 5.5 atm in hydrogen. Beyond, calefaction appears with a reduced dissipated power, rough reduction (90 per cent in few degrees) for nitrogen, smoother for hydrogen. (author) [French] On a etudie l'echange de chaleur entre une paroi horizontale et l'azote ou l'hydrogene bouillant depuis la pression atmospherique jusqu'au 2/3 de la pression critique. Les courbes q = f(T) sont assez bien definies pour l'azote mais accusent une marge d'incertitude pour l'hydrogene. En generale, les {delta}T mesurees sont inferieures a celles obtenues par divers auteurs utilisant la methode du fil. Les courbes plus reproductibles de q{sub max} f(P) passent par un maximum pour les deux liquides a environ 0,4 P{sub cr}, c'est-a-dire 45 watt cm{sup -2} pour 12,5 atm dans l'azote et 16 watt cm{sup -2} pour 5,5 atm dans l'hydrogene. Au-dela, la calefaction se produit avec un pouvoir dissipatif reduit, une reduction brusque pour l'azote (90 p. 100 en quelques degres) et plus reguliere pour l'hydrogene. (auteur)

  1. High vacuum high temperature x-ray camera (1961); Chambre de diffraction de rayons x a haute temperature sous vide pousse (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Baron, J L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    - This camera makes it possible to carry out X-ray studies on highly oxidisable materials, up to about 900 deg. C. Most of the existing models do not provide sufficient protection against the formation of surface oxide or carbide films on the sample. The present arrangement makes it possible to operate at very low pressures: 5 x 10{sup -8} to 10{sup -7} torr, thanks to an entirely metallic apparatus. The radiation heating system consists of an incandescent lamp, outside the evacuated portion, and a reflector which concentrates the energetic flux into the sample through a silica window. The heated parts have thus only a small thermal inertia. With the apparatus it has been possible to determine the phase parameters of uranium-{alpha} up to 650 deg. C with a precision of {+-} 0.0015 A. A similar study has been carried out on a uranium-chromium alloy in the {beta}-phase up to 740 deg. C. (author) [French] Cette chambre permet l'etude, par diffraction de rayons X, de materiaux tres oxydables, ceci jusqu'a 900 deg. C environ. La plupart des modeles existant a l'heure actuelle n'assurent pas une protection suffisante de l'echantillon contre la formation de films superficiels d'oxydes ou de carbures. La disposition d'ensemble permet d'operer sous des pressions tres basses: 5.10{sup -8} a 10{sup -7} torr, grace a une construction entierement metallique. Le systeme de chauffage par rayonnement associe une lampe a incandescence, exterieure a l'enceinte sous vide, et un reflecteur, qui concentre le flux energetique sur l'echantillon, a travers un hublot de silice. Les pieces echauffees ne presentent ainsi qu'une faible inertie thermique. L'appareil a permis la determination des parametres de l'uranjum en phase a, jusqu'a 650 deg. C, avec une precision de {+-} 0,0015 A. Une etude similaire a ete effectuee sur un alliage uranium-chrome, en phase {beta}, jusqu'a 740 deg. C. (auteur)

  2. Strongly correlated electrons at high pressure: an approach by inelastic X-Ray scattering; Electrons correles sous haute pression: une approche par diffusion inelastique des rayons X

    Energy Technology Data Exchange (ETDEWEB)

    Rueff, J.P

    2007-06-15

    Inelastic X-ray scattering (IXS) and associated methods has turn out to be a powerful alternative for high-pressure physics. It is an all-photon technique fully compatible with high-pressure environments and applicable to a vast range of materials. Standard focalization of X-ray in the range of 100 microns is typical of the sample size in the pressure cell. Our main aim is to provide an overview of experimental results obtained by IXS under high pressure in 2 classes of materials which have been at the origin of the renewal of condensed matter physics: strongly correlated transition metal oxides and rare-earth compounds. Under pressure, d and f-electron materials show behaviors far more complex that what would be expected from a simplistic band picture of electron delocalization. These spectroscopic studies have revealed unusual phenomena in the electronic degrees of freedom, brought up by the increased density, the changes in the charge-carrier concentration, the over-lapping between orbitals, and hybridization under high pressure conditions. Particularly we discuss about pressure induced magnetic collapse and metal-insulator transitions in 3d compounds and valence fluctuations phenomena in 4f and 5f compounds. Thanks to its superior penetration depth, chemical selectivity and resonant enhancement, resonant inelastic X-ray scattering has appeared extremely well suited to high pressure physics in strongly correlated materials. (A.C.)

  3. Comportment of various magnesium alloys in carbon dioxide under pressure, between 400 and 600 deg; Compatibilite de divers alliages de magnesium avec le gaz carbonique sous pression entre 400 et 600 deg

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R; Baque, P; Chevilliard, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    'magnesium oxyde fritte'. Les echantillons, preleves dans des produits files, sont convenablement polis, deux etats de surface reproductibles etant realises a titre comparatif. Les essais ont ete effectues dans le gaz carbonique purifie, aux pressions de 25 et 60 atmospheres, et a des temperatures allant de 400 a 600, au moyen d'autoclaves speciaux en acier inoxydable, chauffes exterieurement. Leur duree est en general superieure a 1000 heures. Les equations des courbes d'augmentation de poids obtenues sont du type ({delta}p){sup n} = k.t (({delta}p en mg/cm{sup 2} et t en heures), l'exposant n etant voisin de 2, du moins jusqu'a 500 deg. C. En se referant a des resultats precedemment acquis quant a certains de ces materiaux exposes dans le gaz carbonique sous pression atmospherique et sous 15 atmospheres, il apparait que: 1) Pour un materiau determine: - a une pression donnee, l'oxydation augmente avec la temperature, - a une temperature donnee, l'oxydation augmente avec la pression, - dans les memes conditions de temperature et de pression, les resultats obtenus varient peu suivant les deux etats de surface etudies; 2) les alliages Mg-Zr presentent une resistance a l'oxydation amelioree par rapport au magnesium non allie; 3) l'alliage magnox est beaucoup moins avantageux dans le gaz carbonique que dans l'air, par rapport aux autres alliages. D'une facon generale, les courbes d'oxydation tendant vers un palier apres un certain temps d'exposition, la compatibilite de tous les alliages consideres avec le gaz carbonique apparait satisfaisante jusqu'a une temperature voisine de 500 deg. C, dans les conditions operatoires presentement definies; au dessus de 500 deg. C, des differences notables apparaissent entre les divers alliages, mais des phenomenes de sublimation interferent avec ceux d'oxydation, de sorte qu'un classement des divers materiaux ne peut etre base que sur leur resultante. (auteur)

  4. The compatibility of chromium-aluminium steels with high pressure carbon dioxid at intermediate- temperatures; Compatibilite des aciers au chrome-aluminium avec le gaz carbonique sous pression aux temperatures moyennes

    Energy Technology Data Exchange (ETDEWEB)

    Leclercq, D; Loriers, H; David, R; Darras, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    With a view to their use in the exchangers of nuclear reactors of the graphite-gas or heavy water-gas types, the behaviour of chromium-aluminium steels containing up to 7 per cent chromium and 1.5 per cent aluminium has been studied in the presence of high-pressure carbon dioxide at temperatures of between 400 and 700 deg. C. The two most interesting grades of steel (2 per cent Cr - 0.35 per cent Al - 0.35 per cent Mo and 7 per cent Cr - 1.5 per cent Al - 0.6 per cent Si) are still compatible with carbon dioxide up to 550 and 600 deg. C respectively. A hot dip aluminised coating considerably increases resistance to oxidation of the first grade and should make possible its use up to temperatures of at least 600 deg. C. (authors) [French] Dans l'optique de leur emploi dans les echangeurs de reacteurs nucleaires des filieres graphite-gaz ou eau lourde-gaz, le comportement en presence de gaz carbonique sous pression d'aciers au chrome-aluminium, contenant jusqu'a 7 pour cent de chrome et 1,5 pour cent d'aluminium a ete etudie entre 400 et 700 deg. C. Les deux nuances les plus interessantes (2 pour cent Cr - 0,35 pour cent Al - 0,35 pour cent Mo et 7 pour cent Cr - 1,5 pour cent Al - 0,6 pour cent Si) restent compatibles avec le gaz carbonique jusqu'a 550 et 600 deg. C respectivement. Un revetement d'aluminium, effectue par immersion dans un bain fondu, ameliore notablement la resistance a l'oxydation de la premiere et doit permettre son empioi jusqu'a 600 deg. C au moins. (auteurs)

  5. Some properties of matter at very HTGH temperatures and high pressures (equations of state, opacity); Quelques proprietes de la matiere aux tres hautes temperatures et fortes pressions (equation d'etat, opacite)

    Energy Technology Data Exchange (ETDEWEB)

    Gervat, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-06-15

    studying the influence of compressions on the band structure. (author) [French] Les equations de Thomas-Fermi, apparues comme approximation d'ordre zero des equations d'Hartree-Fock permettent d'etudier certains comportements de la matiere a haute pression. Dans un premier chapitre nous envisageons le calcul de grandeurs ne necessitant pas la resolution de l'equation de SCHOEDINGER. La grandeur des corrections quantiques et d'echange definissent le domaine de validite de la theorie. Pour chaque couple R et T, on peut calculer la pression et l'energie, pans le calcul de cette derniere, nous ayons du, dans la region voisine du noyau ou les-corrections divergent, remplacer la densite donnee par la theorie de Thomas-Fermi par celle deduite des fonctions d'onde qui, dans cette petite region, different tres peu de celle d'un atome d'hydrogene de charge z. Le calcul du degre d'ionisation est particulierement simple et evite la resolution des equations de SAHA. En plus de la repartition des electrons dans l'espace des r on peut aisement determiner la repartition suivant la valeur du nombre quantique I, et ce, pour chaque valeur du couple R, T. Dans le second chapitre, l'introduction du potentiel de Thomas et Fermi dans l'equation de SCHROEDINGER permet d'obtenir le spectre des energies propres d'un atome isole modele, sense representer un atome moyen de la matiere chaude et comprimee. La variation des niveaux avec la pression et la temperature s'en deduit. L'interpretation du phenomene d'ionisation par pression est particulierement simple dans ce modele. La variation des niveaux avec la pression et la temperature s'en deduit. L'interpretation du phenomene d'ionisation par pression est particulierement simple dans ce modele. La connaissance des fonctions d'onde permet le calcul des probabilites de transition,lesquelles, couplees avec les probabilites d ccupation autorisent le calcul des coefficients d'opacite. Seules les transitions lie-libre et libre-libre ont ete envisagees, mais

  6. System Properties and Control of Turbocharged Diesel Engines with High-and Low-Pressure EGR Propriétés système et contrôle de moteurs Diesel turbocompressés avec EGR haute et basse pression

    Directory of Open Access Journals (Sweden)

    Mrosek M.

    2011-09-01

    Full Text Available An extension of the air-and exhaust-system with a low-pressure EGR has the potential to significantly reduce the NOx emissions. Besides a cooled high-pressure EGR and the turbocharger with variable geometry turbine, the low-pressure EGR introduces an additional degree of freedom to control the cylinder charge. This increasing complexity of the air system can be handled with model based control structures and a model based controller calibration. Its static and dynamic properties are investigated. Besides the static couplings in the classical air path, additional couplings appear. A decentralised gain scheduled PI(D-control approach is chosen to control the variables air mass flow rate, high-pressure EGR mass flow rate and charge air pressure. An automated controller calibration, based on a semi-physical mean value model of reduced complexity, is presented. The controller maps depend on the engine operation point and are calibrated by a local linearisation of the semi-physical model. Further, a semi-physical control is capable to almost solely control the air mass flow rate via the low-pressure EGR actuators. This control implicitly accounts for couplings between charge air pressure, high-pressure EGR and the low-pressure EGR system. Finally testbed results are shown. Une extension du système d’air et d’échappement au moyen d’EGR basse pression peut potentiellement réduire significativement les émissions de NOx. À côté de l’EGR haute pression refroidi et du turbocompresseur à turbine à géométrie variable, l’EGR basse pression introduit un degré de liberté supplémentaire pour contrôler la charge du cylindre. Cette complexité croissante du système d’air peut être traitée à l’aide de structures de contrôle et d’un étalonnage de régulateur basés sur des modèles. Ses propriétés statiques et dynamiques sont étudiées. En dehors des couplages statiques dans la boucle d’air classique, des couplages

  7. Mobility of Rb{sup +} and Cs{sup +} ions in gases at high pressures; Mobilite des ions Rb{sup +} et Cs{sup +} dans les gaz a haute pression

    Energy Technology Data Exchange (ETDEWEB)

    Bacconnet, E. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    A theoretical study and mobility measurements have been made of Rb{sup +} and Cs{sup +} ions moving in gases at high pressures (10{sup -2} to 25 kg/cm{sup 2}). The theoretical study has been effected using the results of P. Langevin who considers the ions and molecules as elastic spheres and takes into account the electrical polarization forces. The practical work has been carried out using the Rb{sup +} and Cs{sup +} ions emitted by a thermal source; for the measurement of their velocity the method using an ionic beam cut by four grids was employed. Since the source does not work in atmospheres containing oxygen (even in the combined state) the tests only involved pure gases: nitrogen, argon, helium at pressures of from 10{sup -2} to 12 kg/cm{sup 2}. The overall results show that the Rb{sup +} and Cs{sup +} ionic mobilities are very similar and that for fairly-short times spent by the ions in the gas, the measurement results are in agreement with theory. An increase in these times favours a degradation of the ions, which always leads to a decrease in the mobility. This effect is most marked in helium. The gases argon and nitrogen behave identically towards Rb{sup +} and Cs{sup +} ions. (author) [French] Une etude theorique et des mesures de mobilite ont ete effectuees pour des ions Rb{sup +} et Cs{sup +} se deplacant dans des gaz a haute pression (10{sup -2} a 25 kg/cm{sup 2}). L'etude theorique a ete effectuee en utilisant les resultats de P. Langevin qui assimile les ions et les molecules a des spheres elastiques et tient compte des forces de polarisation electrique. L'etude pratique a ete realisee en utilisant des ions Rb{sup +} et Cs{sup +} emis par une source thermique et pour la mesure de leur vitesse, la methode de coupure du faisceau ionique au moyen de quatre grilles a ete adoptee. La source ne fonctionnant pas dans des atmospheres contenant de l'oxygene (meme a l'etat combine) les essais ont seulement porte sur des gaz purs: azote

  8. Mobility of Rb{sup +} and Cs{sup +} ions in gases at high pressures; Mobilite des ions Rb{sup +} et Cs{sup +} dans les gaz a haute pression

    Energy Technology Data Exchange (ETDEWEB)

    Bacconnet, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    A theoretical study and mobility measurements have been made of Rb{sup +} and Cs{sup +} ions moving in gases at high pressures (10{sup -2} to 25 kg/cm{sup 2}). The theoretical study has been effected using the results of P. Langevin who considers the ions and molecules as elastic spheres and takes into account the electrical polarization forces. The practical work has been carried out using the Rb{sup +} and Cs{sup +} ions emitted by a thermal source; for the measurement of their velocity the method using an ionic beam cut by four grids was employed. Since the source does not work in atmospheres containing oxygen (even in the combined state) the tests only involved pure gases: nitrogen, argon, helium at pressures of from 10{sup -2} to 12 kg/cm{sup 2}. The overall results show that the Rb{sup +} and Cs{sup +} ionic mobilities are very similar and that for fairly-short times spent by the ions in the gas, the measurement results are in agreement with theory. An increase in these times favours a degradation of the ions, which always leads to a decrease in the mobility. This effect is most marked in helium. The gases argon and nitrogen behave identically towards Rb{sup +} and Cs{sup +} ions. (author) [French] Une etude theorique et des mesures de mobilite ont ete effectuees pour des ions Rb{sup +} et Cs{sup +} se deplacant dans des gaz a haute pression (10{sup -2} a 25 kg/cm{sup 2}). L'etude theorique a ete effectuee en utilisant les resultats de P. Langevin qui assimile les ions et les molecules a des spheres elastiques et tient compte des forces de polarisation electrique. L'etude pratique a ete realisee en utilisant des ions Rb{sup +} et Cs{sup +} emis par une source thermique et pour la mesure de leur vitesse, la methode de coupure du faisceau ionique au moyen de quatre grilles a ete adoptee. La source ne fonctionnant pas dans des atmospheres contenant de l'oxygene (meme a l'etat combine) les essais ont seulement porte sur des gaz purs: azote, argon, helium et pour

  9. Étude expérimentale du comportement cyclique d'un acier du type 316 L sous chargement multiaxial complexe en traction-torsion-pressions interne et externe

    Science.gov (United States)

    Bocher, L.; Delobelle, P.

    1997-09-01

    are very rich in informations and lead to classify the different types of loading, with two or three cyclic components, with respect to the observed supplementary hardening. This classification was established as follows: i) The in-phase tests with two or three components (δ = \\varphi = 0^circ); no supplementary hardening is observed. ii) The tension-pressure tests such as r_1 = 1, \\varphi = 90^circ and r_1 = - 1, \\varphi = 60^circ, the hardening is slightly inferior to that of tension-torsion tests. iii) The tension-torsion tests such as r_2 = 1 and δ = 90^circ, where a substantial additionnal hardening takes place. iv) The tension-torsion-pressure tests where the three components are strongly shifted, namely: r_1 = r_2 = 1, δ = 90^circ and \\varphi = 60^circ, and r_2 = 1, r_1 = -1, δ = 41.4^circ and \\varphi = 82.8^circ. The hardening is slightly superior to the one recorded in tension-torsion. A more thorough study is in preparation which considers all the possible combinations in tension-torsion-pressures, and will be performed on the same material. The early results tend to validate the observations presented in this article. Cette étude réside dans la détermination expérimentale du comportement à la température ambiante de l'acier inoxydable 316 L sous chargement cyclique non proportionnel en traction-torsion-pressions interne et externe. Les deux ou trois déformations sinusoïdales appliquées sont soit en phase, soit hors-phase et l'on étudie l'amplitude du durcissement supplémentaire en fonction du degré de multiaxialité. On présente quelques boucles stabilisées typiques. Par rapport au durcissement supplémentaire maximal, les différents essais peuvent être classés comme suit: essais en phase (pas de durcissement supplémentaire), essais de traction-pressions hors-phase, essais de traction-torsion hors phase et essais de traction-torsion-pressions avec déphasages conséquents.

  10. Theory of high frequency discharge in gases under low pressures. Experimental investigation of high-frequency type ion sources; Theorie de la decharge haute frequence dans les gaz aux faibles pressions. Etude experimentale des sources d'ions du type haute frequence

    Energy Technology Data Exchange (ETDEWEB)

    Salmon, Jean

    1955-03-02

    The first part of this research thesis addresses the theory of high frequency discharge in gases under low pressures, and first proposes a calculation of the distribution function for electrons present within the gas. The author then studies the evolution of electron density within a discharge tube by assigning the governing role in electron multiplication to the secondary emission of tube walls. The second part proposes a detailed description of a source operating at 96.5 Mc/s, a discussion of measurements performed on this source, and the search for a theoretical explanation of some of its properties. The author then briefly analyses various existing types of high frequency sources, and finally discusses their use in corpuscular microscopy and in particle accelerators [French] La presente these comprend deux parties. La premiere est consacree a la theorie de la decharge haute frequence dans les gaz aux faibles pressions et comporte tout d'abord le calcul de la fonction de distribution des electrons presents au sein du gaz. Nous etudions ensuite l'evolution de la densite electronique a l'interieur d'un tube a decharge en attribuant, a l'emission secondaire des parois de ce dernier, le role essentiel dans la multiplicalion des electrons. Nous obtenons ainsi les conditions d'amorcage. Tout au long de cette etude, on doit distinguer soigneusement le cas ou le libre parcours moyen des electrons dans le gaz est inferieur aux dimensions de l'enceinte et le cas ou il leur est superieur. La deuxieme partie comprend la description detaillee d'une source fonctionnant sur 96.5 Mc/s, l'expose des mesures effectuees sur celle-ci et la recherche d'une explication theorique de certaines de ses proprietes. Nous faisons ensuite une breve analyse des divers types de sources d'ions haute frequence existant a l'heure actuelle et nous terminons en traitant de leur utilisation en microscopie corpusculaire et dans les accelerateurs de particules.

  11. Stress corrosion cracking of Inconel in high temperature water; Corrosion fissurante sous contrainte de l'Inconel dans l'eau a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Coriou,; Grall,; Gall, Le; Vettier, [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Some Inconel samples were subjected to hot water corrosion testing (350 deg. C), under stress slightly above the elastic limit. It has been observed that different types of alloys - with or without titanium - could suffer serious intergranular damage, including a complete rupture, within a three months period. In one case, we observed an unusual intergranular phenomenon which appeared quite different from common intergranular corrosion. (author) [French] Des essais de corrosion d'Inconel sont realises dans l'eau a 350 deg. C, et sous contrainte legerement superieure a la limite elastique. On constate que differentes varietes d'alliage avec ou sans titane donnent lieu a des accidents intergranulaires graves allant jusqu'a rupture complete en 3 mois. Dans un cas, on observe un phenomene intergranulaire particulier tres different de la corrosion intergranulaire classique. (auteur)

  12. Geopressure and Trap Integrity Predictions from 3-D Seismic Data: Case Study of the Greater Ughelli Depobelt, Niger Delta Pressions de pores et prévisions de l’intégrité des couvertures à partir de données sismiques 3D : le cas du grand sous-bassin d’Ughelli, Delta du Niger

    Directory of Open Access Journals (Sweden)

    Opara A.I.

    2012-05-01

    Full Text Available The deep drilling campaign in the Niger Delta has demonstrated the need for a detailed geopressure and trap integrity (drilling margin analysis as an integral and required step in prospect appraisal. Pre-drill pore pressure prediction from 3-D seismic data was carried out in the Greater Ughelli depobelt, Niger Delta basin to predict subsurface pressure regimes and further applied in the determination of hydrocarbon column height, reservoir continuity, fault seal and trap integrity. Results revealed that geopressured sedimentary formations are common within the more prolific deeper hydrocarbon reserves in the Niger Delta basin. The depth to top of mild geopressure (0.60 psi/ft ranges from about 10 000 ftss to over 30 000 ftss. The distribution of geopressures shows a well defined trend with depth to top of geopressures increasing towards the central part of the basin. This variation in the depth of top of geopressures in the area is believed to be related to faulting and shale diapirism, with top of geopressures becoming shallow with shale diapirism and deep with sedimentation. Post-depositional faulting is believed to have controlled the configuration of the geopressure surface and has played later roles in modifying the present day depth to top of geopressures. In general, geopressure in this area is often associated with simple rollover structures bounded by growth faults, especially at the hanging walls, while hydrostatic pressures were observed in areas with k-faults and collapsed crested structures. Les campagnes de forages profonds dans le delta du Niger ont démontré la nécessité d’une analyse détaillée des surpressions et de l’intégrité des structures pour évaluer correctement les prospects. La prédiction des pressions interstitielles a pu être réalisée ici avant forage à partir de données sismiques 3-D du grand sous-bassin d’Ughelli, dans le delta du Niger. Ce travail a permis de prévoir les régimes de pression du

  13. The Subcritical Assembly for High-Temperature Use; Assemblage Sous-Critique Pour Emploi a Haute Temperature; K voprosu o podkriticheskoj sborke dlya ispol'zovaniya pri vysokikh temperaturakh; Conjunto Subcritico para Temperatura Elevada

    Energy Technology Data Exchange (ETDEWEB)

    Sakurai, Y.; Sekiya, T.; Suita, T. [Osaka University (Japan); Hishida, H.; Hamada, H.; Nagashima, K. [Sumitomo Atomic Energy Industries Group (Japan)

    1964-04-15

    intended to study the influence of high temperature upon the reactor parameters. (author) [French] Les assemblages sous-critiques sont a uranium naturel et a graphite. L'assemblage qui fait l'objet du memoire est caracterise par une partie a haute temperature qui peut etre placee au centre d'assemblages a basse temperature, et peut fournit des renseignements a la fois pour le futur reacteur a haute temperature refroidi par un gaz et pour la conversion directe de l'energie d'un milieu gazeux a haute temperature en electricite. En outre, il est prevu qu'il sera utilise pour renseignement. L'assemblage a ete place dans une structure de 2 x 2 x 3 m, composee de manchons en graphite de barres carrees de 10 cm de cote. La partie a haute temperature, de 1 m3, est chauffee par effet Joule et peut etre maintenue a une temperature de 2000 Degree-Sign C. Pour la partie a basse temperature, on utilise comme combustible des pastilles d'UO{sub 2} , et pour la partie , a haute temperature, des pastilles d'UC{sub 2}. Le combustible est introduit dans les manchons en graphite de barres de section carree. Les sources Am-Be de 5 c sont placees sous le socle fixe a la base des assemblages; d'autre part, les neutrons puises sont injectes dans l'assemblage a un point pris arbitrairement. La cible placee a l'extremite d'un tube branche sur un accelerateur est bombardee par un faisceau de deutons. Les connexions du dispositif de chauffage par effet Joule sont refroidies a l'eau et l'ensemble de la surface des parios de la partie a haute temperature a l'helium. Les circuits d'helium a haute temperature sont concus de maniere a servir pour les travaux de recherche relatifs a la conversion directe. Ces assemblages sont equipes d'appareils de controle et de mesure comparables a ceux dont sont dotes les petits reacteurs nucleaires. L'auteur met au point une methode experimentale de determination du laplacien du systeme; il a cherche quelle est la meilleure disposition pour la source de neutrons puises

  14. Etude des propriétés rhéologiques des coupes lourdes à haute température et pression Study of the Rheological Properties of Heavy Cuts At High Temperature and Pressure

    Directory of Open Access Journals (Sweden)

    Cohen A.

    2006-11-01

    Full Text Available Les procédés rencontrés dans la valorisation des résidus et des huiles lourdes font appel à des équipements dont le dimensionnement optimal exige la connaissance précise des propriétés rhéologiques de la phase hydrocarbonée impliquée et ce, dans un large domaine de température et de pression. En conséquence, le Laboratoire de Thermodynamique du Centre Réacteurs et Processus de l'École Nationale Supérieure des Mines (ENSM de Paris s'est attaché au développement d'un viscosimètre approprié à ces mesures. Il est basé sur la détermination du couple résistant provoqué par le fluide à étudier, cisaillé entre deux cylindres coaxiaux en rotation relative. Le domaine de viscosité balayé s'étend de 10 à 40 000 cP, les température et pression maximales d'utilisation étant respectivement de 500°C et 30 MPa. La qualité des résultats fournis par cet appareillage a été testée, à des températures et dilution variables, sur quelques coupes lourdes issues des bruts Safaniya et Boscan après désasphaltage ou hydroviscoréduction. On obtient ainsi des valeurs fiables, reproductibles et précises de la viscosité des coupes lourdes hydrocarbonées sur un large domaine de température. Au-delà de 430-440°C toutefois, la pression opératoire de la cellule, fixée par la quantité du gaz admis, augmente brusquement, révélant un craquage thermique important des échantillons et offrant ainsi un moyen d'étude et de simulation des procédés industriels de viscoréduction. Processes used for the upgrading of residues and heavy oils makes use of equipment for which the optimal sizing requires the exact understanding of the rheological properties of the hydrocarbon phase involved over a wide temperature and pressure range. Therefore, the thermodynamics laboratory of the ENSM Center for Reactors and Processes has carried out the development of a viscosimeter suited for such measurements. It is based on determining the

  15. Micro-mechanical modeling of the growth/percolation of pressurized pores in a ceramic matrix at high temperatures; Modelisation micromecanique de la croissance et de la percolation de pores sous pression dans une matrice ceramique a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Vincent, P.G

    2007-11-15

    The aim of this work is to propose an elasto-plastic model of damage in a porous ceramics containing two populations of saturated cavities: the nuclear fuel uranium dioxide highly irradiated and at high temperature. The followed approach consists in a multi-scale approach based on the hypothesis of separation of the scales between the two populations of cavities (spherical intragranular pores and spheroidal intergranular pores) and of those of the macroscopic isotropy. The proposed elasto-plastic model of damage treats separately of the elasticity, of the surface of plasticity and of the evolution of the internal parameters of the model with load. The taking into account of different pressures in each population of cavity is carried out for elasticity-plasticity-damage. The model developed for the elastic behaviour takes into account the two populations of cavity, their morphology, their distribution and the pore pressures inside them. The proposed plasticity criteria is based on homogenization methods for non linear behaviours. At the grain scale, the first population of cavity is taken into account by a plasticity criteria of Gurson-Tvegaard-Needleman type. At the scale of grains collection, the presence of a second population of cavity inside a compressible matrix leads to the development of new superior boundaries and pertaining estimations for the effective plasticity surface. These models depend on the morphology and of the distribution of cavities. In the case of drained cavities, an analytical estimation, based on the writing of the classical variational principle with a compressible velocity field and an average on the equiprobable orientations is developed. In the case of saturated cavity, another estimation, based on the variational approach of Ponte Castaneda (1991) with a linear N phases comparison composite is proposed. These models are compared to numerical simulations by finite elements and to numerical simulations using the fast Fourier transformation method. The evolution laws of the retained elasto-plastic model (the estimation at N phases) are established on hypotheses of middle conservation of the cavities morphologies. An a posteriori enrichment of the evolution law of the porosity at the second scale is carried out by numerical simulations which are relative to the studied material. These numerical simulations allow to study the coalescence of the voids of the second scale (the percolation term is assimilated to the coalescence phenomenon) and implement a volume/cohesive finite element method on periodical Voronoi cells. (O.M.)

  16. Measurement and Prediction of Volumetric and Transport Properties of Reservoir Fluids At High Pressure Mesure et prédiction des propriétés volumétriques et des propriétés de transport des fluides de gisement à haute pression

    Directory of Open Access Journals (Sweden)

    De Sant'ana H. B.

    2006-12-01

    models exhibit significant uncertainties because of large viscosity contrasts between the individual components of the reservoir fluid. In order to test and improve prediction methods, we started the acquisition of viscosity data under representative conditions. Special care was taken in the implementation of the capillary tube method, so that low viscosities (down to 0. 02 mPa. s could be measured with high accuracy at pressures up to 120 MPa on simple systems, such as methane, n-pentane, nitrogen, and nitrogen-pentane mixtures. As a result, it was possible to evaluate mixing rules for viscosity predictions. Les découvertes de pétrole ou de gaz dans des conditions sévères de température (plus de 150°C ou de pression (plus de 50 MPa se comptent dans plusieurs bassins à travers le monde. En mer du Nord, on prévoit de mettre en production des gisements dont les conditions de fond vont jusqu'à 110 MPa et 190°C. Ces caractéristiques constituent un défi pour la prédiction des propriétés des fluides de gisement, aussi bien au niveau expérimental que théorique. Dans le but d'étudier les fluides à ces températures et pressions, l'IFP a construit un équipement à haute pression sans mercure, équipé de hublots en saphir, d'une cellule de prélèvement de phase, et d'un dispositif de mesure de viscosité par la méthode du tube capillaire. Son application est illustrée ici par des exemples de fluides réels et des mélanges synthétiques. L'équipement a été employé en premier lieu pour mesurer les propriétés volumétriques des gaz. Il apparaît ainsi que des facteurs de compressibilité très élevés peuvent être atteints avec des gaz à condensat HP-HT. Les conséquences en sont importantes sur les taux de récupération envisageables. De manière à améliorer la prédiction des propriétés volumétriques des mélanges dans ces conditions, on propose d'utiliser une équation d'état classique, comme celle de Peng-Robinson, avec deux am

  17. BioDiesel as Additive in High Pressure and Temperature Steam Recovery of Heavy Oil and Bitumen Utilisation d’un biogazole comme additif pour la récupération d’huile lourde et de bitume par injection de vapeur à hautes pression et température

    Directory of Open Access Journals (Sweden)

    Babadagli T.

    2012-05-01

    , provenant de l’exploitation d’une mine à ciel ouvert en Alberta du Nord, au Canada. Le sable bitumineux a été mis dans un récipient puis à l’intérieur d’une cellule haute pression. Les expériences de récupération du bitume ont été réalisées en pulvérisant un ester méthylique d’acide gras de colza sur le sable à raison de 2 g/kg de bitume. Ces essais montrent une augmentation de la récupération du bitume de plus de 40 %. Au cours d’une autre série d’essais, un ester méthylique d’acides gras d’huile de pin a été injecté avec de la vapeur à raison de 8,3 g de biogazole / kg de vapeur. Du fait de la solubilité du biogazole dans le bitume, l’effet du biogazole sur la récupération de bitume n’a pas pu être évalué précisément. Les mesures de pression de vapeur réalisées sur les échantillons de biogazole dérivés d’huile de colza et d’huile de pin suggèrent que les compositions à la saturation du biogazole dans la vapeur à 1,8 MPa et 205 °C sont supérieures d’au moins un ordre de grandeur aux dosages de biogazole requis. Des essais supplémentaires sont planifiés pour lesquels des dosages de biogazole seront réduits jusqu’à environ 0,5 à 1,0 g de biogazole/kg de vapeur et la solubilité du biogazole dans le bitume sera suivie de près.

  18. Effect of high energy electrons on the skin and on the underlying tissues of the rabbit. A clinical and histological study; Effets des electrons de haute energie sur la peau et les tissus sous-jacents du lapin. Etude clinique et histologique

    Energy Technology Data Exchange (ETDEWEB)

    Legeay, G; Vialettes, H; Adnet, J J; Court, L; Masse, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-07-01

    The authors consider in this report the effects of high-energy electrons on rabbit teguments and on the underlying tissues after a single high dose irradiation. After briefly considering the mechanism of interaction between the electrons and matter as a function of their energy, the authors describe the dosimetry carried out, as a function of the irradiation device. The animal received surface doses of 5700 to 22100 rads in the thigh; the electron energy varied from 21 to 30 MeV. A clinical study was carried out over a period of nine months with a view to following the evolution of the damage and the functional degradation of the underlying tissues. A histological study of the induced damage was made after a second irradiation using 30 MeV electrons to produce doses of 16400 rads. Interesting observations were made concerning the damage caused to muscular and nerve tissues. (authors) [French] Les auteurs etudient, dans ce rapport, les effets des electrons de haute energie sur les teguments du lapin et les tissus sous-jacents apres une irradiation unique a dose elevee. Apres un rappel du mecanisme de l'interaction des electrons avec la matiere en fonction de leur energie, la dosimetrie realisee est exposee en fonction du dispositif d'irradiation. Les animaux ont recu, au niveau de la cuisse, des doses en surface de 5700 a 22100 rads; les energies des electrons vont de 21 a 30 MeV. Une etude clinique des lesions, observees pendant 9 mois, decrit leur evolution ainsi que les alterations fonctionnelles des tissus sous-jacents. Une etude histologique des lesions induites a ete realisee au cours d'une seconde experience pour des doses de 16400 rads avec des electrons de 30 MeV. D'interessantes observations ont ete faites concernant les lesions des tissus musculaires et nerveux. (auteurs)

  19. Influence of a hydrostatic pressure on the diffusion in metals having a cubic structure; Contribution a l'etude de l'influence de la pression hydrostatique sur la diffusion dans les metaux cubiques

    Energy Technology Data Exchange (ETDEWEB)

    Beyeler, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    In view of obtaining informations on the structure of vacancies. We have determined, by diffusion experiments under high pressure, the activation volumes for self diffusion in different face centered cubic metals: silver, gold, copper, aluminium and in body centered cubic uranium (gamma phase). Activation volumes for noble metals diffusion in aluminium have also been investigated. The experimental results on gold, silver and copper are in good agreement with most of the theoretical models. The estimated activation volume for gamma uranium seems to indicate a vacancy mechanism.The results on aluminium for both self and impurity diffusion agree quite well with Friedel's theoretical predictions. [French] Pour preciser la structure des lacunes, on a, par des etudes de diffusion sous haute pression determine les volumes d'activation correspondant a l'autodiffusion dans des metaux de structure cubique face centree: argent, or, cuivre et aluminium et dans un metal de structure cubique centree: l'uranium gamma. On a egalement determine les volumes d'activation pour l'heterodiffusion des metaux nobles dans l'aluminium. Les resultats obtenus pour l'or, l'argent et le cuivre sont en accord avec la plupart des modeles theoriques classiques. Le volume d'activation d'autodiffusion evalue pour l'uranium gamma est compatible avec une diffusion par lacune. Les resultats concernant l'aluminium et l'heterediffusion des metaux nobles dans l'aluminium verifient assez bien les previsions theoriques de Friedel. (auteur)

  20. Le CERN sous haute sécurité

    CERN Multimedia

    Scappaticci, Bruno

    2008-01-01

    1500 prestigious guests came to participate to the LHC inauguration on last Tuedday, among which the Swiss President and the French Prime Minister François Fillon. Picked unities of the polices (Swiss an French) were on a war-footing.. (2 pages)

  1. Research into zirconium alloys resistant to carbon dioxide under pressure at temperatures of up to 600 deg C (1963); Recherche d'alliages de zirconium compatibles avec le gaz carbonique sous pression jusqu'a 500 ou 600 deg C (1063)

    Energy Technology Data Exchange (ETDEWEB)

    Baque, P; Dominget, R; Bossard, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    Zirconium is a metal having a relatively low neutron capture cross-section and a high melting point; it is thus possible to consider its use in particular as a canning material for fuel elements in CO{sub 2}-cooled nuclear reactors. A preliminary study of several types of zirconium showed that the metal is already strongly oxidised in this gas at 500 deg C. The 'breakaway' phenomenon is generalised; the oxidation rate is then linear and depends on the carbon dioxide pressure. An attempt was therefore made to find binary and tertiary alloys in order to improve the metal behaviour. Several interesting compositions were found: 1, 1.6 and 2.5 per cent of copper, 2 per cent of vanadium, and 0.05 and 0.5 per cent of calcium. Tertiary copper-molybdenum and copper-phosphorus alloys are also less liable to oxidation and in particular do not exhibit the 'breakaway' phenomenon even after a prolonged treatment at 600 deg C. (authors) [French] Le zirconium se trouve parmi les metaux a section de capture neutronique relativement faible et possede une temperature de fusion elevee; aussi peut on songer a l'employer notamment comme materiau de gainage d'elements combustibles pour reacteurs nucleaires refroidis au gaz carbonique. Une etude prealable de plusieurs qualites de zirconium a montre que le metal est deja assez fortement oxyde dans ce gaz des 500 deg C. En effet, le phenomene de ''breakaway'' est general; la vitesse d'oxydation devient alors lineaire et depend de la pression du gaz carbonique. La recherche d'alliages binaires et ternaires a donc ete entreprise afin de tenter d'ameliorer le comportement du metal. Elle a permis d'aboutir a quelques compositions interessantes: cuivre 1, 1,6 et 2,5 pour cent, vanadium 2 pour cent, et calcium 0,05 et 0,5 pour cent. Des alliages ternaires au cuivre-molybdene et cuivre-phosphore sont egalement moins oxydables, et en particulier ne presentent pas le phenomene de ''breakaway'', meme apres une longue exposition a 600 deg C. (auteurs)

  2. Influence of a hydrostatic pressure on the diffusion in metals having a cubic structure; Contribution a l'etude de l'influence de la pression hydrostatique sur la diffusion dans les metaux cubiques

    Energy Technology Data Exchange (ETDEWEB)

    Beyeler, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    In view of obtaining informations on the structure of vacancies. We have determined, by diffusion experiments under high pressure, the activation volumes for self diffusion in different face centered cubic metals: silver, gold, copper, aluminium and in body centered cubic uranium (gamma phase). Activation volumes for noble metals diffusion in aluminium have also been investigated. The experimental results on gold, silver and copper are in good agreement with most of the theoretical models. The estimated activation volume for gamma uranium seems to indicate a vacancy mechanism.The results on aluminium for both self and impurity diffusion agree quite well with Friedel's theoretical predictions. [French] Pour preciser la structure des lacunes, on a, par des etudes de diffusion sous haute pression determine les volumes d'activation correspondant a l'autodiffusion dans des metaux de structure cubique face centree: argent, or, cuivre et aluminium et dans un metal de structure cubique centree: l'uranium gamma. On a egalement determine les volumes d'activation pour l'heterodiffusion des metaux nobles dans l'aluminium. Les resultats obtenus pour l'or, l'argent et le cuivre sont en accord avec la plupart des modeles theoriques classiques. Le volume d'activation d'autodiffusion evalue pour l'uranium gamma est compatible avec une diffusion par lacune. Les resultats concernant l'aluminium et l'heterediffusion des metaux nobles dans l'aluminium verifient assez bien les previsions theoriques de Friedel. (auteur)

  3. The Hydrodynamic Characteristics of Cocurrent Downflow and Cocurrent Upflow Gas-Liquid-Solid Catalytic Fixed Bed Reactors: the Effect of Pressure Les caractéristiques hydrodynamiques des réacteurs gaz-liquide-solide à lit de catalyseur fixe à écoulement cocourant montant et descendant : l'influence de la pression

    Directory of Open Access Journals (Sweden)

    Wild G.

    2006-11-01

    Full Text Available While most catalytic fixed bed gas-liquid reactors of the petrol industry work at quite high pressures, the academic scientific work in this field concerned itself almost exclusively with the domain of approximatively atmospheric pressures. The authors present the results of some years of experimental investigations on the hydrodynamic characteristics of trickle bed reactors and lately of cocurrent upflow reactors. During the last years, results were also obtained under pressures up to 8 MPa. The measurements were made in a small scale cold flow equipment (diameter 23 mm. Different aqueous and organic more or less viscous, eventually coalescence inhibiting liquids, four gases and a number of non porous more or less wettable particles were used. The liquid holdup was determined in all cases by measuring liquid phase residence time distribution by different tracers. The following conclusions may be drawn:(a In the high interaction regime, it is the inertia of the gas and the liquid phases which is the main cause of the dissipation of mechanical energy. In this regime, results obtained in cocurrent upflow and downflow are approximately equal. (b Most correlations of literature are unable to predict the effect of pressure on the pressure drop or the liquid holdup. (c The gas viscosity has no influence on the hydrodynamics. It is therefore possible to simulate for example hydrogen under high pressure conditions by another gas of the same density (at a much lower pressures. A critical evaluation of the correlations and/or models of literature is presented, concerning their ability to represent the different characteristics as a function of pressure. Tandis que la plupart des réacteurs industriels gaz-liquide à lit de catalyseur fixe fonctionnent à assez hautes pressions, les travaux scientifiques académiques sont, dans ce domaine, presque exclusivement consacrés aux pressions avoisinant la pression atmosphérique. Les auteurs présentent les r

  4. Etude hartree-fock de la tautomerisation du 1azirene sous pression ...

    African Journals Online (AJOL)

    The lazirene molecule is a heterocyclic compound containing two carbon atoms, one nitrogen atom and three hydrogen atoms which one is on the nitrogen atom. The hydrogen pressure being represented by one molecule of dihydrogen, the reaction of the dihydrogen with the azirene in the presence of the palladium ...

  5. Actinides and lanthanides under pressure: the pseudopotential approach; Actinides et terres rares sous pression: approche pseudopotentiel

    Energy Technology Data Exchange (ETDEWEB)

    Richard, N

    2002-07-01

    In the Density Functional Theory Framework, the pseudopotential formalism offers a broader scope of study than other theoretical methods such as global relaxation of the parameters of the cell or ab initio molecular dynamics simulations. This method has been widely used to study light elements or transition metals but never to study f elements. We have generated two non local norm conserving Trouillier-Martins pseudopotentials (one in LDA and one in GGA) for the cerium. To check the validity of the pseudopotentials, we have calculated the equilibrium volume and the incompressibility modulus and compared our results to previous all-electron calculations. If the GGA and non linear core corrections are used, the equation of state is in a good agreement with the experimental equation of state. A static study of the previously proposed high pressure phases give a transitions fcc-a''(I)-bct. Using the pseudopotentials we have generated, an ab initio molecular dynamics simulation at constant pressure, in the region between 5 and 12 GPa where the stable phase of cerium is not well defined, lead us to predict that a centred monoclinic structure, as the a''(I) phase previously observed in some experiments, is the most stable phase. We have also generated pseudopotentials for the light actinides (Th, Pa, U and Np). We have study their phase transitions under pressure at zero temperature. We compared our results with all electron results. The structure parameters have always been relaxed in this study. And for the first time in pseudopotential calculation, the spin-orbit coupling has been taken into account. The curves describing the variation of the volume or the incompressibility modulus depending on the elements and the phase transitions are always in agreement with the one found in the all electron calculations. (author)

  6. A continuous acceleration tube of ions under 200 KV; Un tube d'acceleration continue d'ions sous 200 KV

    Energy Technology Data Exchange (ETDEWEB)

    Mongodin, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1954-07-01

    'interieur du tube pour differents regimes de fonctionnement. L'influence de la pression residuelle dans le tube s'y trouve expliquee. II se termine enfin sur une partie du probleme fondamental des claquages se produisant a l'interieur des tubes accelerateurs sous haute tension. (M.B.)

  7. Propriétés structurales et électroniques de sels de BEDT-TTF. Influence de la température et de la pression

    OpenAIRE

    Guionneau , Philippe

    1996-01-01

    Les sels conducteurs organiques basés sur la molécule BEDT-TTF présentent une gamme de comportements dont la diversité s'exprime par application de contraintes de température et de pression. La connaissance des prorpriétés structurales de ces sels en tout point du diagramme de phase s'avère indispensable à la compréhension de leurs propriétés physiques. La diffraction X à très basse température et haute pression demeure encore une voie d'investigation pionnière. Nous avons étudié les comporte...

  8. Le cerveau sous effet placebo

    OpenAIRE

    Touzet , Claude

    2017-01-01

    International audience; Comment le fait de croire qu’on nous injecte de la morphine (alors qu’il s’agit de sérum physiologique) peut-il faire disparaître la douleur ? Investigation sur le cerveau sous placebo.

  9. Haute-Savoie at CERN

    CERN Multimedia

    2003-01-01

    From 10 to 14 November, twenty-two companies presented their latest technology at the Haute-Savoie exhibition at CERN. With hedges of green plants, wooden lawn chairs, and even a small fountain like the ones near mountain chalets, the exhibitors transformed the hall of the main building into a little natural corner. They not only brought local flair but also a multitude of interesting information about their know-how of innovative technologies. In addition to the exhibition, presentations on topics ranging from multiplexing over materials to nano-technologies were given at the end of each afternoon in the Council Chamber. One of the exibitors at the "Haute-Savoie at CERN" shows (from left to right) Roland Pascal, Service Director General of the Haute-Savoie Département, Claude Birraux, Vice-President of the general council of Haute-Savoie and Member of the French Parliament, Robert Aymar, designated CERN Director General, and Ernest Nycollin, President of the general council of Haute-Savoie one of the stand...

  10. High temperature microscope (1961); Microscopie a haute temperature (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Rousseau, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-06-15

    The purpose of this work is the realization of an apparatus for observation of radioactive metallic samples at high temperature and low pressure. The operating conditions are as follows: to limit oxidation of the metal, pressure of about 10{sup -6} mm of Hg is maintained in the furnace. In case the oxidation of the sample would be too important, on ultra vacuum. device could be used; working temperatures range between room temperature and 1200 deg. C; furnace temperature is regulated; observation is done ever in polarized light or interference contrast; to insure protection of the operator, the apparatus is placed in a glove-box. With that apparatus, we have observed the {alpha}{yields}{beta}, {beta}{yields}{gamma} transformations of uranium. A movie has been done. (author) [French] Le but de ce travail est la realisation d'une appareillage permettant l'observation a chaud et sous vide d'echantillons metalliques radioactifs. Cet appareillage fonctionne dans les conditions suivantes: l'echantillon est chauffe sous une pression de l'ordre de 10{sup -6} mm de mercure afin de limiter l'oxydation du materiau examine. L'utilisation eventuelle d'un groupe de pompage pour ultra vide est prevue; l'echantillon peut etre porte a une temperature comprise entre quelques degres et 1200 deg. C; la temperature du four est regulee; l'observation s'effectue soit en lumiere polarisee soit en contraste interferentiel; l'appareil est dipose dans une boite a gants afin d'assurer la protection de l'operateur contre les poussieres radioactives; Les transformations {alpha}{yields}{beta}, {beta}{yields}{gamma} de l'uranium ont ete observees. Un film a ete realise. (auteur)

  11. Banc d'essai des machines de pression positive continue ...

    African Journals Online (AJOL)

    Le syndrome d'apnées du sommeil est une pathologie fréquente qui se manifeste par l'obstruction (de plus de 10 secondes) des voies aériennes supérieures chez l'homme pendant le sommeil. Pour le traiter, le patient dort avec un masque nasal raccordé à une machine auto-pilotée qui délivre une pression positive ...

  12. Soil clean up by vapour extraction: parametrical study; Depollution des sols par extraction sous pression reduite: etude de quelques parametres

    Energy Technology Data Exchange (ETDEWEB)

    Dutheil, C.

    2003-05-15

    Soil vapour extraction is a treatment process for soils polluted by volatile organic compounds. Its principle relies on the circulation of gaseous flow in soil by the application of a depression of some hundreds milli-bars. A parametrical study has been led on a soil artificially polluted by tri-chloro-ethene. It shows that the gaseous flow rate has a slight influence on pollutants extraction yield. This is due to rate limited mass transfer processes. Soil moisture plays a negative role on treatment efficiency because of the reduction of the porosity available for the gas circulation. Tests have been performed on a soil polluted by a complex mixture of organic pollutants to elaborate a methodology of technical feasibility assessment. This methodology aims at identifying and limiting risks of site rehabilitation failure. Tests results show that soil vapour extraction was inadequate to treat the soil tested in this study because of the strong affinity between a dense organic phase (grease) and chlorinated solvents. (author)

  13. Ripa Vticensis. Le renseignement militaire en Afrique sous le Haut-Empire

    Directory of Open Access Journals (Sweden)

    Yann Le Bohec

    2018-01-01

    Full Text Available The notion of ripa under the Principate has not attracted the interest of specialists in Africa. Yet a structure of this kind is present in this part of the empire; it is found in an inscription that mentions a ripa Vticensis. What is it about ? To give an answer, it should be seen that this word was used in a military context in these provinces, for Utica and Hippo, also elsewhere, for the Danube and the Euphrates.   Published online 15/01/2018

  14. La justice guatémaltèque sous haute observation | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    3 déc. 2004 ... C'est là une des affaires retenues par les chercheurs de l'Instituto de Estudios Comparados en Ciencias Penales de Guatemala (ICCPG ou Institut d'études comparatives en droit pénal du Guatemala) pour faire valoir la nécessité pour la société civile de suivre l'évolution de la justice. Avec l'appui financier ...

  15. HAUTE-SAVOIE AT CERN

    CERN Multimedia

    2003-01-01

    From 10 to 14 November 2003 Administration Building Bldg 60/61 - ground and 1st floor 09.00 hrs - 17.30 hrs Twenty-two companies will present their latest technology at the "Haute-Savoie at CERN" exhibition. It is organised by the Conseil Général de la Haute-Savoie. Dates Thématiques Firmes concernées Conférences (Salle du Conseil) Horaires à fixer Evénements Lundi 10 nov. Electronique, Connectique et Multiplexage ALPES DEIS AMPHENOL-SOCAPEX NSI SENSOREX SCAIME "Présentation des Procédures d'Achats" -"Le multiplexage: technologie d'avenir" par M. Medan (NSI). - Visite du Conseil Général. - Vernissage de l'exposition. - Signature de la nouvelle convention CG74 / CERN. Mardi 11 nov. Les institutionnels UNIVERSITE DE SAVOIE ESIA SITE D'ARCHAMPS ESI "Infrastructures et facilités offertes par le site d'Archamps aux ...

  16. HAUTE-SAVOIE AT CERN

    CERN Multimedia

    2003-01-01

    Twenty two companies will present their latest technology at the "Haute-Savoie at CERN" exhibition. It is organised by the Conseil Général de la Haute-Savoie. From 10 to 14 November 2003 Administration Building Bldg. 60/61 - ground and 1st floor 09.00 hrs - 17.30 hrs DatesThématiquesFirmes présentesConférences(Salle du Conseil) 14:30 - 15:30Evénements Lundi 10 nov. Electronique, Connectique et Multiplexage ALCATELALPES DEISAMPHENOL-SOCAPEXC4iNSISENSOREXSUSS MICROTEC "Présentation des Procédures d'Achats"–"Le multiplexage: technologie d'avenir" par M. Medan (NSI).- Visite du Conseil Général.- Conférence de presse.- Vernissage de l'exposition. Mardi 11 nov. Les institutionnelsALCATELC4i ESILAPP SITE D'ARCHAMPSSUSS MICROTECTHESAMEUNIV. DE SAVOIE"Infrastructures et facilités offertes par le site d'Archamps aux créateur...

  17. Terre Haute and the Normal School Fire

    Science.gov (United States)

    Ferreira, Allen

    1974-01-01

    This paper examines the short history of the Terre Haute Normal School before its tragic burning on April 9, 1888 and relates that story to the course of events immediately following the fire. (Author)

  18. Mise en solution et précipitation de l'uranium et du thorium dans les conditions de moyenne et haute température (résumé Solution and Precipitation of Uranium and Thorium under Average and High-Temperature (Summary

    Directory of Open Access Journals (Sweden)

    Moreau M.

    2006-11-01

    Full Text Available Les études tant analytiques qu'expérimentales réalisées au cours des vingt dernières années ont bien montré le rôle joué par les complexes d'uranylcarbonates dans le transport de l'uranium en milieu hydrothermal oxydant ou faiblement réducteur. Les travaux expérimentaux actuels sur la mobilité de U et Th, à haute température et haute pression, montrent la très grande différence de solubilité entre UO2 et ThO2, comme l'influence des ions complexants et celles de fO2 et aH+. Ces résultats expérimentaux sont comparés aux données recueillies sur les leucogranites et les granites calcoalcalins (France et divers gisements ou anomalies en uranium (Québec, Rössing, Madagascar, etc.. Dans la catazone U et Th précipitent sous forme de solutions solides d'uranothorianite dans les milieux déficitaires en silice, et sous forme d'uranothorite dans les granites et les syénites La précipitation d'uraninite non thorifère dans les leucogranites français s'explique d'abord par la faible concentration en thorium des solutions aqueuses durant la phase deutérique. Au cours du métamorphisme progressif on peut observer un retard dans la mobilisation de l'uranium en conditions relativement oxydantes, quand U est associé à Ti et OH. Dans le domaine mésozonal la brannérite stabilise l'uranium en présence de titane jusqu'à l'anatexie. Au-delà elle se dissocie en donnant de l'uraninite non thorifère et du rutile. Both analytic and experimental research done over the Iast twenty years has revealed the role played by uranylcarbonate complexes in the transfer of uranium in an oxidant or slightly reducing hydrothermal medium. Recent experimental research on the mobility of U and Th, at high temperature and high pressure, shows the great difference in solubility between UO2 and ThO2, like the influence of complexing ions and of fO2 and aH+. These experimental findings are compared to data gathered on leucogranites and colcoalkaline granites

  19. SOUS LES PAVÉS: LA PLAGE!

    DEFF Research Database (Denmark)

    Clemmensen, Thomas Juel

    2017-01-01

    kunstnerbevægelse situationisterne brugte parolen sous les pavés: la plage! blev stranden associeret med det frie naturlige rum i kontrast til den brolagte gade, der repræsenterede samfundets undertrykkende orden. Men udtrykket kan samtidig minde os om geologiens allestedsnærværende karakter. Geologien findes lige...

  20. Clichy-sous-Bois (France) operation

    Energy Technology Data Exchange (ETDEWEB)

    Dechamp, A

    1984-09-01

    The geothermal plant of Clichy-sous-Bois has been operating for 2 years and covers the needs of 3,400 equivalent-dwellings, including a sport-hall, 2 schools, the town-hall and 7 low-cost groups of flats. Geothermal energy covers 65% of the energy yearly global consumption for heating and sanitary hot water, i.e. 35,151 MWh. Thus, 3,195 TOE are saved each year. In December, 1979, the town of Clichy-sous-bois delegated their sponsorship to the Societe d'equipement et d'amenagement du territoire du departement de la Seine-Saint-Denis - SODETAT 93 for the realization of the geothermal operation. The production and injection wells were drilled between July and September, 1981. The Dogger aquifer was encountered at 1,800 m deep, with a temperature of 70,8/sup 0/C and an exploitation yield of 200m/sup 3//h. Surface works started in March 1982 and were completed in November of the same year. Apart from the geothermal power plant, the network comprises 11 exchange substations and a distribution network of 2,700 m long with 7,000 m of underground pipes. This plant is exploited by the Compagnie francaise d'exploitation thermique (COFRETH) within the framework of a farmout contract for 20 years, including: production, transportation and public distribution of geothermal heat all over the city of Clichy-sous-Bois.

  1. R. F. plasmoids and resonant discharges; Plasmoides a haute frequence et decharges resonnantes

    Energy Technology Data Exchange (ETDEWEB)

    Taillet, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-06-15

    In R.F. discharges at reduced pressure a resonance can increase by an order of magnitude the intensity of the plasma R.F. electric field. The electron density of the plasma adjusts itself to keep the resonant frequency equal to the excitation frequency. This behaviour has been observed by an electron beam technique. When such a discharge is excited in electronegative gases, the negative ion density may be higher than the electron density. Therefore, the D.C. potential distribution in plasma and sheath is modified. The plasma appears as a luminous body isolated from the walls by a large sheath (R.F. plasmoid). (author) [French] Dans les decharges H.F. a faible pression une resonance peut elever d'un ordre de grandeur l'intensite du champ electrique interne du plasma. La densite electronique s'ajuste elle-meme de facon a rendre egales la frequence d'excitation et la frequence de la resonance. Ce mecanisme a ete observe a l'aide de faisceaux electroniques. Lorsqu'une telle decharge est excitee dans un gaz electronegatif, la densite des ions negatifs peut etre plus elevee, que la densite electronique, ce qui modifie la distribution du potentiel continu dans le plasma et la gaine. Le plasma apparait comme un corps lumineux isole des parois par une large gaine (plasmoide a haute frequence). (auteur)

  2. R. F. plasmoids and resonant discharges; Plasmoides a haute frequence et decharges resonnantes

    Energy Technology Data Exchange (ETDEWEB)

    Taillet, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-06-15

    In R.F. discharges at reduced pressure a resonance can increase by an order of magnitude the intensity of the plasma R.F. electric field. The electron density of the plasma adjusts itself to keep the resonant frequency equal to the excitation frequency. This behaviour has been observed by an electron beam technique. When such a discharge is excited in electronegative gases, the negative ion density may be higher than the electron density. Therefore, the D.C. potential distribution in plasma and sheath is modified. The plasma appears as a luminous body isolated from the walls by a large sheath (R.F. plasmoid). (author) [French] Dans les decharges H.F. a faible pression une resonance peut elever d'un ordre de grandeur l'intensite du champ electrique interne du plasma. La densite electronique s'ajuste elle-meme de facon a rendre egales la frequence d'excitation et la frequence de la resonance. Ce mecanisme a ete observe a l'aide de faisceaux electroniques. Lorsqu'une telle decharge est excitee dans un gaz electronegatif, la densite des ions negatifs peut etre plus elevee, que la densite electronique, ce qui modifie la distribution du potentiel continu dans le plasma et la gaine. Le plasma apparait comme un corps lumineux isole des parois par une large gaine (plasmoide a haute frequence). (auteur)

  3. Compressed air injection technique to standardize block injection pressures : [La technique d'injection d'air comprimé pour normaliser les pressions d'injection d'un blocage nerveux].

    Science.gov (United States)

    Tsui, Ban C H; Li, Lisa X Y; Pillay, Jennifer J

    2006-11-01

    pressions d'injection sous les 1293 mmHg, pression associée à une lésion nerveuse cliniquement significative. MéTHODE: Les pressions d'injection pour des seringues de 20 et 30 mL et diverses tailles d'aiguilles (18G, 20G, 21G, 22G et 24G) ont été mesurées dans un système fermé. Un volume défini d'air a été aspiré dans une seringue rempli de solution saline, puis comprimé et maintenu à des pourcentages variés pendant la mesure de la pression. L'aiguille a été insérée dans l'ouverture à injection d'un détecteur de pression muni d'une extension avec un bouchon d'injection en position fermée. La valeur de la pression et l'intervalle de confiance de 99 % (IC) pour une compression d'air à 50 % ont été évalués en utilisant une régression linéaire avec tous les points de données. RéSULTATS: La linéarité de la loi de Boyle a été démontrée avec une forte corrélation, r = 0,99 et une pente de 0,984 (IC de 99 % : 0,967-1,001) La pression nette générée sous une compression de 50% a été de 744,8 mmHg avec un IC de 99 % entre 729,6 et 760,0 mmHg. Les diverses combinaisons de seringues et d'aiguilles ont présenté des résultats similaires. En créant et en maintenant dans la seringue une compression d'air à 50% ou moins, les pressions d'injection seront dans l'ensemble sous le seuil des 1293 mmHg associé à un facteur de risque de lésion nerveuse cliniquement significative. Cette technique peut permettre une surveillance simple, objective et en temps réel pendant les injections d'anesthésiques locaux tout en réduisant fondamentalement la vitesse d'injection.

  4. Radiculoplexopathie, anticorps anti Yo et cancer ovarien sous ...

    African Journals Online (AJOL)

    Les radiculo-plexopathies au cours des cancers sont le plus souvent d'origine métastatique. Leur origine dysimmune est rare. Nous rapportons un cas de radiculoplexopathie d'évolution favorable sous traitement immunomodulateur, survenue chez une patiente porteuse d'un carcinome ovarien bilatéral sous ...

  5. Palatability of sous vide processed chicken breast.

    Science.gov (United States)

    Turner, B E; Larick, D K

    1996-08-01

    The influences of brine composition, internal temperature, heating rate, and storage periods up to 28 d on flavor, texture, and color of sous vide processed chicken breast were evaluated. Pectoralis major muscles containing water and sodium chloride, with or without sodium lactate, were browned and vacuum packaged. Sous vide processing was by fast or slow heating to an internal temperature of 77 or 94 C. Product was evaluated after 0, 14, and 28 d storage at 4 C. Quality was evaluated by gas chromatographic analyses of flavor volatiles, shear, color, and sensory panels. Incorporation of sodium lactate into brine did not influence oxidative stability (as measured by headspace gas chromatography) or sensory warmed-over flavor. Presence of sodium lactate did result in enhanced fresh roasted or meaty and saltiness sensory scores as well as a more yellow color. The more rapid heating rate decreased sulfur-containing compounds and did not influence other volatile concentrations. Products processed to 94 C were less juicy, less tender, and contained higher quantities of alcohols and hydrocarbons than those processed to 77 C. Storage resulted in a decline in fresh roasted or meaty flavor note and an increase in warmed-over flavor note and quantities of alcohols, aldehydes and ketones, hydrocarbons, and total headspace volatiles.

  6. Tambaqui (Colossoma macropomum sous vide: characterization and quality parameters

    Directory of Open Access Journals (Sweden)

    Fabiane de Cássia Pontes Ramos

    2016-02-01

    Full Text Available The objective of this study was to evaluate the microbiological, physical and physico-chemical quality parameters of sous vide preparation of pen-reared tambaqui (Colossoma macropomum. To prepare the tambaqui sous vide, 200 g of fillet, 50 g of basil sauce (1:4 fish fillet:sauce ratio and 10 mL of 5% sodium lactate were used. The product was then vacuum-packaged, pasteurized at 65 ºC for 12.5 min and refrigerated. The presence of Salmonella spp., sulfite-reducing Clostridium and Listeria monocytogenes was not detected in the samples analyzed. The coliform count at 45 ºC and coagulase-positive staphylococci were below the limit (103 permitted by the law in vigor. Water retention capacity and chloride content analyses revealed that the tambaqui fillet differed significantly (P<0.05 from the sous vide because of the addition of basil sauce. The total volatile basic nitrogen (TVB-N and thiobarbituric acid reactive substances (TBARS content of the fillet and sous vide were below the limits established by the law, indicating good quality. The lightness (L* and yellow color (b* of the fillet and the sous vide did not differ significantly (P>0.05, but the red color (a* decreased in the sous vide, which is related to the addition of basil sauce. The chroma (C* and hue angle (ho differed significantly (P<0.05, and the fillet samples were lighter in color, whereas the sous vide was characterized by yellow color. The n-6/n-3 ratios found for the fillet and the sous vide are within the recommended values, which is important for human metabolism. The fillet and sous vide also had high calcium, zinc, magnesium and potassium concentrations. It is concluded that tambaqui sous vide is a good source of nutrients, rich in fatty acids and minerals essential for human health.

  7. Lipoblastome de la fosse sous temporale

    Science.gov (United States)

    Najib, Jaafar; Aniba, Khalid; Laghmari, Mehdi; Lmejjati, Mohammed; Ghannane, Houssine; Benali, Said Ait; Ennadam, Hind; Mrabti, Hind; Idrissi, Nadia Cherif

    2014-01-01

    Le lipoblastome est une tumeur bénigne rare, formée d'adypocytes immatures associés à la présence d'une matrice myxoide, de septas fibreux, et d'une architecture lobulaire. Il survient généralement chez le nourrisson et l'enfant. Cette tumeur touche dans la majorité des cas les tissus sous-cutanés des extrémités et du tronc. Elle est extrèmement rare au niveau de la tète et du cou. Un total de moins de 100 cas a été rapporté précédemment dans la littérature. PMID:25918563

  8. The Sous Vide Revolution: Coming Full Circle and Beyond

    OpenAIRE

    Hoeche, Ulrich

    2016-01-01

    For the purpose of this research, academic material and online sources were utilised to clarify the meaning of the key term sous vide. The Sous Vide Advisory Committee (1991) says ‘Sous Vide (also known as Cuisine en Papillote) is an interrupted catering system in which raw or par-cooked food is sealed into a vacuumised laminated plastic pouch or container, heat treated by controlled cooking, rapidly cooled and then reheated for service after a period of chilled storage’. According to Herb...

  9. Wet skins tanning with chromium in dense CO{sub 2} under pressure; Tannage au chrome de peaux humides en CO{sub 2} dense sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Saldinari, L. [Tanneries Roux SA, 26 - Romans Sur Isere (France)]|[Tanneries du Puy (France)]|[Tanneries d' Annonay, 07 (France); Dutel, Ch. [Societe ATC (France); Perre, Ch. [CEA Centre de Pierrelatte (DCC/DTE/SLC), 26 (France)

    2000-07-01

    An ancestral gesture steadily improved through the centuries, the transformation of skins into leather includes several stages of which the principal one is tanning. Today, 90 % of the world's leather products are tanned with chromium. However, this stage is an environmental liability, and reducing the volume and chromium content of the waste has become a major issue. A first study on skin degreasing by dense CO{sub 2} helped sharply reduce the volume of the fatty effluents. To replace water by dense CO{sub 2} as the tanning medium was the logical next step. The present study was carried out in cooperation with three tanneries in the Rhone-Alpes-Auvergne area of France and a manufacturer of tanning materials. The difficulty of the study was the chemically opposed character of the two media involved. CO{sub 2} is a non-polar and lipophilic solvent while inorganic chromium is insoluble. The water present in the treated skin is a polar and ionic reaction medium and one of the reagents in tanning chemistry. The mixture of these two partially miscible compounds gives a pH 3 by carbonic acid formation. Tanning is based on the reactivity of collagen, the main component of the skin, with hydroxylated complexes of chromium. Collagen is a protein containing some chemical functions, amines (R-NH{sub 2}) and carboxylic (R-COOH) for example. These functions impart an amphoteric character to the compound. The WERNER theory of complex salts explains the formation of hydroxylated complexes of chromium and their fixing on the carboxylic functions of collagen by oxolation. pH is the key parameter in tanning. The success of the process demands chromium impregnation without fixing it at a pH lower than 5, and then to fix it by increasing the pH. This opened two alternatives for transferring chromium in the skin: solubilize chromium in CO{sub 2} via soluble organometallic complexes; or put the chromium salt into suspension without solubilizing it. The best results were obtained with the second option, which is better adapted to tanning chemistry. The water in the skin quickly absorbs the chromium in suspension. The process of tanning in CO{sub 2} medium was applied in a 10-liter cylindrical autoclave, equipped with an internal rotating basket similar in design to a traditional fuller. The optimum conditions are 80 bar and 37 deg C for pressure and temperature, 15 to 20 minutes impregnation time and 2 hours for basification, modified chromium sulfates as tanning agent, and ACTIPLEX CPS containing sodium bicarbonate as basification agents. The pH of the initial skin was 3, dropping to 2.5 after chromium impregnation and then rising to 5 after basification. The feasibility of chromium tanning in dense CO{sub 2} under pressure was demonstrated. The objectives were achieved: reduction of waste volume and chromium content, reduction of chromium use by better impregnation and fixing, shorter operating time, good end product quality. A patent was filed in October 1999. Pre-industrialization of the process is in the planning stage, with a 100-liter unit built to treat a whole skin. (authors)

  10. La base sous-marine de Bordeaux, sous le béton la culture

    Directory of Open Access Journals (Sweden)

    Mathieu Marsan

    2012-06-01

    Full Text Available Active à peine plus d’un an pendant l’Occupation, la base sous-marine de Bordeaux cristallise encore les souvenirs douloureux des heures sombres du Port de la Lune. Le bunker attire pourtant depuis les années 1960 des artistes, cinéastes, plasticiens et musiciens fascinés par l’esprit du lieu. Institutionnalisée au début des années 1990, la base sous-marine devient un espace dédié au nautisme avant d’être consacrée à l’art contemporain au début du XXIe siècle. Aujourd’hui au cœur du projet d’aménagement des bassins à flot du quartier de Bacalan, la base sous-marine questionne et intrigue ses visiteurs sur son passé, mais aussi – et surtout – sur son avenir.Build during the German occupation, the submarine base of Bordeaux active during hardly more than a year still crystallizes the painful memories of the dark hours of the « Port de la Lune ». Nevertheless, the bunker attracts artists, film-makers, visual artists and musicians fascinated by the spirit of the place since the 1960’s. Institutionalized at the beginning of 1990’s, the submarine base became a space dedicated to the yachting before contemporary art at the beginning of the XXIth century. Nowadays at the heart of the project of redevelopment of the wet docks in the urban area of Bacalan, the submarine base questions and intrigues its visitors on its past, but also – and especially – on its future.

  11. Fertilité des sols agricoles sous vigne et sous blé de la région de ...

    African Journals Online (AJOL)

    L'objectif de ce travail est l'évaluation agronomique de la qualité du sol sous vigne et sous blé dans la région Mohammedia-Benslimane au Maroc, à travers les indicateurs chimiques de la qualité du sol (pH, CE, CaCO3, Carbone organique total, Azote, Phosphore et Potassium). Les résultats de cette étude montrent que ...

  12. Andra in Meuse/Haute-Marne

    International Nuclear Information System (INIS)

    Mazoyer, David

    2016-11-01

    Every year, France generates tens of thousands of cubic metres of radioactive waste. This waste comes from various sectors which make use of the properties of radioactivity, including nuclear power generation, defence, industry, health care and research. At present, Andra operates two waste disposal facilities in the Aube where 90% of the total volume of radioactive waste generated every year is managed. For safety reasons, the remaining 10% cannot be disposed of at these surface facilities. Some of this waste, known as high-level waste (HLW) and intermediate-level long-lived waste (ILW-LL), is highly radioactive and can remain hazardous for several hundred thousand years. A suitable solution must be implemented to manage such waste, as set down in the Act of 28 June 2006: reversible disposal in a deep geological formation. Starting with its Underground Research Laboratory in Bure (in the Meuse department), on which construction began in 2000, Andra has gradually expanded the facilities at the Meuse/Haute-Marne Centre (CMHM) in the area. In 2007, the Perennial Observatory of the Environment (OPE) was set up to better understand changes over time in the natural environment around Andra's facilities and, in 2009, the Technological Exhibition Facility opened in Saudron (in the Haute-Marne department), to present the Cigeo geological disposal facility project. Last, the Environmental Specimen Bank opened in 2014. Here, environmental monitoring samples taken in connection with the OPE are conserved for at least one hundred years. In addition to contributing to development of the two departments by creating jobs and purchasing from local suppliers, Andra has been committed to working alongside local players for the last twenty years, becoming an integral part of economic, social and cultural life in the region. If the Cigeo project is approved, the site will become a leading industrial, research and education cluster for the region. This document presents: the Andra

  13. A Comparison of Effects of Ambient Pressure on the Atomization Performance of Soybean Oil Methyl Ester and Dimethyl Ether Sprays Comparaison des effets de la pression ambiante sur l’atomisation en “spray” de methylester d’huile de soja et de dimethyléther

    Directory of Open Access Journals (Sweden)

    Kim H.J.

    2010-11-01

    Full Text Available The purpose of this study is the experimental investigation of Soybean oil Methyl Ester (SME and DiMethyl Ether (DME spray characteristics injected through the common-rail injection system under various ambient pressures. A high pressure chamber that can be pressurized up to 4 MPa was utilized for a change of ambient pressure. In order to compare the spray development and atomization characteristics, the images of SME and DME were obtained by using a high speed camera with two metal halide lamps under various ambient pressures in the spray chamber. From these spray images, the spray characteristics such as the spray penetration from the nozzle tip, maximum radial distance, and spray diameter were measured and analyzed. In addition, the Sauter Mean Diameter (SMD of two fuels under ambient pressure was analyzed using the droplet measuring system. It was revealed that the axial distance of spray from the nozzle tip of the SME spray is longer than that of DME spray under same injection condition. The axial penetration, maximum radial distance, and spray diameter decreased when the ambient pressure in the chamber increased. As the ambient pressure increased, the SMD decreased and the DME spray showed a superior atomization performance compared to the SME spray. Le but de cette étude est l’investigation expérimentale de l’effet de diverses pressions ambiantes sur les caractéristiques des sprays (issus d’un système "common rail" de methylester d’huile de soja (SME et de dimethyléther (DME. La pression ambiante dépend de la chambre et sa valeur la plus haute peut monter jusqu’à 4 MPa. Pour comparer le développement de spray et la caractéristique d’atomisation, des images de spray de SME et DME à différentes pression ambiantes sont obtenues avec une caméra à haute vitesse à deux lampes de métal halide. Les caractéristiques du spray, comme la pénétration, la distance radiale maximale et le diamètre de spray, sont mesur

  14. Entre clémence et extrême sévérité. Les juges de la Haute Cour de Namur face aux femmes criminelles dans la seconde moitié du XVIIIe siècle.

    Directory of Open Access Journals (Sweden)

    Sarah Auspert

    2010-07-01

    Full Text Available Au XVIIIe siècle, une nouvelle conception de la femme, développée par les esprits des Lumières, tend à se diffuser dans la société. Au discours religieux qui diabolisait les représentantes du « sexe faible », se substitue progressivement une image plus positive de la femme fondée sur ses fonctions « naturelles » d’épouse et de mère. À travers l’analyse de la répression de la criminalité féminine exercée par la Haute Cour de Namur dans la seconde moitié du XVIIIe siècle, notre mémoire de maîtr...

  15. Influence de la pression et de la non-idéalité des gaz dans le calcul d'un réacteur d'ammoniac Influence of Gas Pressure and Non-Iddeality on Designing an Ammonia Reactor

    Directory of Open Access Journals (Sweden)

    Scheiderman B.

    2006-11-01

    Full Text Available Le mélange gazeux qui parcourt un réacteur de synthèse d'ammoniac présente des écarts notables par rapport aux gaz idéaux. On a établi les équations de calcul d'un réacteur à gradient thermique optimum en tenant compte de l'influence de ces écarts sous trois pressions d'opération (150, 300 et 500 atm.. On a vérifié que les corrections principales à effectuer sont dues à la fugacité; les autres sont d'une importance moindre, et affectent surtout le contrôle du réacteur. En outre, on a mis en évidence l'influence considérable de la pression totale. The gaseous mixture flowing through an ommonia synthesis reactor shows considerable divergences from the behovior of ideal gases. These divergences are examined at three operating pressures (150, 300 and 500 atm, and the corresponding design equations for an optimum temperature progression are determined. The main diver gences are those caused by fugacity. The others are of lesser importance. At the same time, the great influence of total pressure is demonstrated.

  16. Radioinitiation of Chain Branched Reactions and its Sensitization; Amorcage sous rayonnement des reactions par ramification en chaine; sensibilisation du processus; Radiatsionnoe initsiirovanie tsennykh razvetvlennykh reaktsij i ego sensibilizatsiya; Radioiniciacion de reacciones en cadena ramificadas y medios para aumentar su sensibilidad

    Energy Technology Data Exchange (ETDEWEB)

    Barelko, E V; Kartashova, L I; Komarov, P N; Proskurnin, M A [Karpov Physico-Chemical Institute, Moscow, Union of Soviet Socialist Republics (Russian Federation)

    1960-07-15

    This paper describes the results of experiments by the writers with radioinitiation of chain branched reactions of the oxidation of organic compounds. The function of radiation as an initiating agent is described with reference to the oxidation of several unsaturated hydrocarbons and butanol. The reaction is self-accelerating and proceeds spontaneously after radiation has ceased. A detailed investigation was made of a process from oxidizing benzene, which has a high radiation resistance. The writers devised a method of sensitizing the radioinitiation of the oxidation of radiation-resistant substances by chemically inert but non-radiation-resistant substances. The main quantitative features of the process for the radiooxidation of benzene are stated to be the accumulation of various reaction products, and the effect of temperature, pressure, power and radiation dosage on the process of such accumulation. Information was obtained about the mechanism of the process. The design of circulating equipment is described. (author) [French] Dans ce memoire, les auteurs presentent les resultats d'une etude consacree a l'amorcage sous rayonnement de reactions, d'oxydation des composes organiques, par ramification en chaine. Ils montrent le role des rayonnements en tant qu'agents d'amorcage de la reaction, en citant comme exemples l'oxydation de certains hydrocarbures non satures et du butanol. La reaction possede un caractere d'auto-acceleration et continue spontanement lorsque l'action des rayonnements a cesse. La reaction d'oxydation du benzene a ete etudiee en detail; elle est caracterisee par la haute stabilite de la substance vis-a-vis de l'action des rayonnements. Les auteurs formulent les principes de la sensibilisation, par l'action de substances instables vis-a-vis des rayonnements de l'amorcage sous rayonnement de la reaction d'oxydation de substances stables vis-a-vis des rayonnements et chimiquement inertes. Le memoire fournit les caracteristiques quantitatives

  17. Scintigraphy of the Pericerebral Subarachnoidspaces; Scintigraphie des Espaces Sous-Arachnoidiens Pericerebraux

    Energy Technology Data Exchange (ETDEWEB)

    Oberson, R.; Martini, T. [Institut Universitaire de Radiologie Medicale, Hopital Cantonal, Lausanne (Switzerland)

    1969-05-15

    -auricular shunt of the C.S.F. in cases of symptomatic hydrocephalus of traumatic or occult origin in adult or child patients. The study was based on an analysis of over 100 scintigrams of the pericerebral subarachnoid cavities. From this, the authors were gradually able to work out the normal and pathological symptomatology of this field, from the point of view of both cisternal morphology and fluid hydrodynamics. (author) [French] L'exploration des espaces sous-arachnoiediens pericerebraux par les radioisotopes (cisternographie radioisotopique ou 'RISA- cisternography' ) prend une place de plus en plus importante parmi les techniques neuroradioisotopiques de diagnostic. Elle fournit de precieux renseignements sur la permeabilite des espaces sous-arachnoiediens et sur la dynamique du liquide cephalo-rachidien (LCR). On doit actuellement la considerer comme indispensable et irremplacable dans le diagnostic de certaines affections neurologiques, tout comme la gamma-encephalographie et les techniques neuroradiologiques plus classiques (angiographie et pneumographie cerebrales). En effet, cet examen est seul a preciser l'aspect morphologique global des espaces sous-arachnoiediens pericerebraux; tout en renseignant sur la permeabilite des citernes pericerebrales et des sillons de la convexite, il fournit une image scintigraphique typique et symetrique, facile a observer, de face et de profil, des voies principales de circulation du LCR cisternal. L'image scintigraphique d'une citerne indique qu'elle est permeable et que l'espace sous-jacent l'est aussi. Du point de vue dynamique, la cisternographie radioisotopique, outre la demonstration par voie scintigraphique de la permeabilite des citernes, met en evidence le schema normal ou pathologique de la dynamique du LCR. Le schema normal de progression du LCR est actuellement bien etabli. Il est du plus haut interet de le connaitre afin de distinguer deja quelques syndromes pathologiques: la presence d'une fistule de LCR (la

  18. VALEUR PATRIMONIALE DE SERRASALMINAE HERBIVORES DU HAUT MARONI (GUYANE FRANÇAISE : APPROCHES BIOLOGIQUE ET SOCIOCULTURELLE EN PAYS WAYANA.

    Directory of Open Access Journals (Sweden)

    PAGEZY H.

    2002-01-01

    Full Text Available La valeur patrimoniale des kumaru, espèces de poissons appartenant à la sous-famille des Serrasalminae, a été approchée selon des critères faisant référence à leur place au sein de la biodiversité ou de la sociodiversité. Du point de vue de l’anthropologue, les kumaru apparaissent indéniablement comme les espèces de poissons ayant globalement les plus fortes valeurs sociale, hédonique, économique, non seulement chez les Amérindiens Wayana du Haut Maroni, mais aussi chez les Noirs Boni du cours moyen. On peut les qualifier à ce titre d’espèces patrimoniales. Du point de vue du biologiste, les trois espèces de kumaru du Haut Maroni se situent à des niveaux d’endémicité différents, mais toutes participent au fonctionnement du biotope particulier des herbiers à Podostemaceae, au moins dans leurs jeunes stades. Au-delà de la simple conservation des espèces, le mode de distribution de l’asitau (Prosomyleus rhomboidalis et la position du watau yaikë (Tometes lebaili dans la phylogénie des Serrasalminae leur confèrent un ensemble de qualités entrant dans l’évaluation de leur valeur patrimoniale. L’habitat de ces espèces, milieu fragile et très particulier, participe aussi à la patrimonialité.

  19. 76 FR 22009 - Amendment of Class E Airspace; Terre Haute, IN

    Science.gov (United States)

    2011-04-20

    ...-1034; Airspace Docket No. 10-AGL-22] Amendment of Class E Airspace; Terre Haute, IN AGENCY: Federal... Terre Haute, IN, to accommodate new Area Navigation (RNAV) Standard Instrument Approach Procedures at Union Hospital Heliport, Terre Haute, IN. The FAA is taking this action to enhance the safety and...

  20. 76 FR 5302 - Proposed Amendment of Class E Airspace; Terre Haute, IN

    Science.gov (United States)

    2011-01-31

    ...-1034; Airspace Docket No. 10-AGL-22] Proposed Amendment of Class E Airspace; Terre Haute, IN AGENCY... action proposes to amend Class E airspace at Terre Haute, IN. Controlled airspace is necessary to... (POINT-IN-SPACE) SIAP at Union Hospital Heliport, Terre Haute, IN. Controlled airspace is needed for the...

  1. Maison, immeuble et compagnie : le singulier pluriel du logement de banlieue : enquêtes dans les Hauts-de-Seine 1840-1940

    Directory of Open Access Journals (Sweden)

    Antoine Le Bas

    2012-05-01

    Full Text Available Familier du paysage de proche banlieue parisienne (Hauts-de-Seine, le logement sous appentis a séduit les spéculateurs malgré une promiscuité que rejettent des ouvriers rêvant d’un toit familial. Des philanthropes leur bâtiront des maisons complexes tandis qu’une mixité fonctionnelle (travail, commerce, service de plus en plus rare à Paris, affecte le logement de proche banlieue. En organisant la complexité de l’espace urbain et de ses flux, l’urbanisme opère une distinction fonctionnelle dissolvant cette mixité, par le dépassement des types architecturaux.The tenement building, a familiar type in the suburbs of the Hauts-de-Seine department, close to Paris, was frequently put up by speculative builders, even if the promiscuity they supposed was generally rejected by workers who would have preferred their own, individual homes. Some philanthropical builders offered complex housing types, and buildings associating accommodation and other functions (work, commerce, services affected housing in the suburbs, although such types were rare in the capital itself. Organising the complexity of urban space and its circulations, town planning operated a functional division that dissolved this mixity by going beyond existing building types.

  2. La dépression maladie du siècle ?

    CERN Multimedia

    2002-01-01

    D après un rapport de l OMS, la dépression compte parmi les maladies les plus fréquentes et répandues dans le monde. Pour des raisons encore inconnues, on constate que les femmes souffrent deux fois plus de cette maladie que les hommes. Entre 3% et 5% de la population mondiale est victime de ce mal-être à un moment donné de sa vie, soit 120 à 200 millions de personnes. De plus, l âge du premier épisode dépressif est de plus en plus jeune.

  3. Meuse/Haute-Marne Centre. Activity report 2013

    International Nuclear Information System (INIS)

    2014-09-01

    The National Radioactive Waste Management Agency (Andra), was established by the December 1991 Waste Act as a public body in charge of the long-term management of all radioactive waste, under the supervision of the Ministry of Ecology, Energy, Sustainable Development and the Sea (formerly the Ministry of Industry and the Ministry of Environment), and the Ministry of Research. The Andra operates 3 facilities at its Meuse/Haute-Marne site: the Bure underground laboratory (Meuse), a Technological space (Haute-Marne), and an ecological samples library in front of the underground lab. This document is the 2013 activity report of the Meuse/Haute-Marne center. It presents a review of the activities of the center: presentation of the installations, 2013 highlights in pictures, incidents, provisions made for safety, security and radiation protection, environmental impacts, public information and communication

  4. Annual report of the Meuse/Haute-Marne Centre 2012

    International Nuclear Information System (INIS)

    2012-09-01

    The National Radioactive Waste Management Agency (Andra), was established by the December 1991 Waste Act as a public body in charge of the long-term management of all radioactive waste, under the supervision of the Ministry of Ecology, Energy, Sustainable Development and the Sea (formerly the Ministry of Industry and the Ministry of Environment), and the Ministry of Research. The Andra operates 3 facilities at its Meuse/Haute-Marne site: the Bure underground laboratory (Meuse), a Technological space (Haute-Marne), and an ecological samples library in front of the underground lab. This document is the 2012 activity report of the Meuse/Haute-Marne center. It presents a review of the activities of the center: presentation of the installations, 2012 highlights in pictures, provisions made for safety, security and radiation protection, environmental impacts, public information and communication

  5. Meuse/Haute-Marne Centre. Annual report 2010

    International Nuclear Information System (INIS)

    2011-09-01

    The National Radioactive Waste Management Agency (Andra), was established by the December 1991 Waste Act as a public body in charge of the long-term management of all radioactive waste, under the supervision of the Ministry of Ecology, Energy, Sustainable Development and the Sea (formerly the Ministry of Industry and the Ministry of Environment), and the Ministry of Research. The Andra operates 2 facilities at its Meuse/Haute-Marne site: the Bure underground laboratory (Meuse), and a Technological space (Haute-Marne). This document is the 2010 activity report of the Meuse/Haute-Marne center. It presents a review of the activities of the center: presentation of the installations, 2010 highlights in pictures, incidents, provisions made for radiation protection, environmental impacts, public information and communication

  6. Passing through: queer lesbian film and Fremde Haut.

    Science.gov (United States)

    Aaron, Michele

    2012-01-01

    Expanding the horizons of lesbian film, Fremde Haut is located within three broad frames: the cross-dressing genre, the New Queer Cinema (NQC) movement, and an Accented or diasporic film aesthetic. While strong connections exist between the cross-dressing film and NQC, less addressed are the links between the New Queer and the Accented yet these are of more radical, that is queerer, potential. Through Fremde Haut, this article illustrates how intimately tied to race and nation, gender and sexuality are, to reveal the accented as queer and the queer as accented. Ultimately, what is distinguished is the potency of a new "quare" cinema.

  7. Study of high frequency instabilities on a cold cathode reflex discharge; Contribution a l'etude des instabilites a haute frequence dans la decharge reflex a cathodes froides

    Energy Technology Data Exchange (ETDEWEB)

    Gregoire, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-06-01

    The cold cathode reflex discharge develops a cathode sheath of several hundreds of volts, which accelerates electrons released from the cathode to high velocities along the lines of the axial magnetic field. On the studied pressure range (4.10{sup -4} torr < p < 2.10{sup -2} torr) the plasma density is about 10{sup 11} cm{sup -3}. Under certain conditions high frequency (1 5000 MHz) instabilities appear. These instabilities are found to profoundly modify the mean characteristics of the discharge. In particular, particle flow across the lines of magnetic field is found to be considerably greater than that predicted by classical diffusion theory. Theoretical considerations are presented with complementary experimental results. They show that the high frequency instabilities are a result of the fast electronic assembly accelerated through the cathode sheath. (author) [French] Dans certaines conditions, qui sont precisees, des instabilites a haute frequence (1 5000 MHz) se developpent dans la decharge reflex a cathodes froides. Lorsque le plasma (n {approx_equal}10{sup 11} cm{sup -3}) est instable, les caracteristiques moyennes de la decharge sont profondement alterees. Les fuites de particules a travers les lignes de forces du champ magnetique statique applique deviennent en particulier trop importantes pour que le seul effet classique des collisions binaires puisse les expliquer. L'ionisation du gaz est assuree par une assemblee electronique qui acquiert dans les gaines cathodiques ({approx_equal} 500 volts) une vitesse, parallele au champ magnetique, importante. La discussion de resultats theoriques et une experience complementaire montrent que cette population d'electrons rapides, tres distincte de celle des electrons lents du plasma pour les pressions les plus faibles du domaine etudie (4.10{sup -4} torr < p < 2.10{sup -2} torr), est responsable des instabilites a haute frequence observees. (auteur)

  8. Etude expérimentale du cliquetis à haut régime Experimental Study of Hight-Speed Knocking

    Directory of Open Access Journals (Sweden)

    Guibet J. C.

    2006-11-01

    Full Text Available La première partie de cette étude a consisté à observer et à tenter d'interpréter l'action des conditions de fonctionnement et des paramètres de réglage du moteur sur la tendance au cliquetis à haut régime. On a montré ensuite que les différentes familles chimiques d'hydrocarbures qui constituent les carburants classiques présentent chacune un comportement bien distinct en fonction de la richesse, de la pression et de la température d'admission. On a également étudié l'influence de la teneur en plomb du carburant et du type d'alkyle de plomb employé. Quelques expériences ont été effectuées afin de déterminer l'incidence d'une réduction de un point de taux de compression sur l'exigence en octane à haut régime et sur l'action des caractéristiques de composition du carburant. Enfin, en déterminant le pourcentage de cycles soumis au cliquetis pour différentes avances à l'allumage, il a été possible de fournir quelques indications permettant de mieux caractériser l'intensité du phénomène. The first part of this study consists in observing and trying to interpret the effect of operating conditions and engine tuning parameters on the tendency for high-speed knocking to appear. The different chemical families of the hydrocarbons making up conventional fuels are shown to each have a quite different behavior depending on the fuel-air equivalency ratio and the admission pressure and temperature. The influence of the lead content in the fuel and of the type of lead alkyl used is also studied. Some experiments were performed to determine the influence of a one-point reduction in the compression ratio on the high-speed octane requirement and on the effect of fuel composition properties. Lastly, by determing the percentage of cycles accompanied by knocking at different spark advances, some indications were found for better characterizing the intensity of the phenomenon.

  9. Calage thermodynamique du point mort haut des moteurs à piston Thermodynamic Calibration of Top Dead Center in Piston Engines

    Directory of Open Access Journals (Sweden)

    Pinchon P.

    2006-11-01

    Full Text Available Lorsqu'on utilise un système d'acquisition rapide de données sur moteur, il se pose souvent le problème d'associer des grandeurs calculées, comme le volume de la chambre de combustion, à des grandeurs mesurées comme la pression dans le cylindre. II est alors indispensable de synchroniser avec une grande précision absolue ces deux grandeurs en repérant avec soin au moins un point de référence de la cinématique bielle-manivelle. Dans la méthode développée ici on a choisi de déterminer la position angulaire du vilebrequin correspondant au Point Mort Haut (PMH grâce à l'exploitation du signal de pression-cylindre acquis en compression-détente sans combustion, le moteur étant entraîné en rotation. Le principe du calage consiste à calculer l'écart existant entre le PMH et l'angle de la pression maximale qui est aisément repérable. Basée sur des considérations thermodynamiques théoriques, cette méthode de calage a été testée avec succès au cours d'essais effectués sur divers moteurs dont on a fait varier en particulier le rapport volumétrique, le remplissage et les pertes à la segmentation. La précision de la méthode est de l'ordre de 1/10e de degré de rotation vilebrequin. When a fast data-acquisition system is used for an engine, the problem often arises of associating both calculated data, such as combustion chamber volume, and measured data, such as pressure inside the cylinder. It then becomes indispensable to synchronize these two data with great absolute accuracy by carefully determining at least a reference point in the kinematics of the connecting-rod/crank shaft assembly. In the method developed here, we have chosen to determine the angular position of the crankshaft corresponding to top dead center (TDC by making use of the cylinder-pressure signal recorded during compression/expansion without combustion for motored engine. The calibration principle consists in calculating the shift between TDC and the

  10. Deep geothermal energy: the Soultz-sous-Forets experience

    International Nuclear Information System (INIS)

    Genter, A.; Guenot, N.; Graff, J.J.

    2010-01-01

    This paper presents the mining exploitation project of the geothermal heat at Soultz-sous-Forets, located 50 km NE of Strasbourg (Bas Rhin, France). A geothermal power plant, inaugurated mid-2008, will commercialize its own power generation soon. This power plant is owned by a consortium of French-German industrialists through the European economical interest group for the mining exploitation of heat. The paper presents the geological characteristics of the hot dry rock geothermal reservoir, the deep geothermal wells, the hydraulic stimulation of the reservoir rock, the surface equipments of the power plants and the production pumps, the activities of the site in 2008 and 2009 and the perspectives of development of this energy source in France in the light of the Soultz-sous-Forets site experience. (J.S.)

  11. L'intervention sous-marine : situation actuelle et perspectives d'avenir Underwater Operations and Techniques: Current Situation and Future Outlook

    Directory of Open Access Journals (Sweden)

    Bertrand A. R. V.

    2006-11-01

    Full Text Available A l'occasion de la Conférence Internationale de Paris sur la Pénétration sous-marine(6-8 décembre 1982, cet article fait le point sur les différents moyens d'intervention sous-marine disponibles à ce jour (plongeurs, engins télécommandés, sous-marins à pression atmosphérique et sur un certain nombre de problèmes technologiques communs (matériaux, télémanipulation, navigation, sources d'énergie. Ce domaine est encore en pleine évolution et fait appel aux récentes innovations technologiques. Bien que les engins télécommandés semblent avoir actuellement la faveur des industriels, les autres moyens restent d'avenir prometteur, la complémentarité devant remplacer dans le futur la concurrence La résurrection de l'Argyronète qui doit devenir en 1985 un banc d'essais des nouvelles techniques est le témoignage de l'activité de ce secteur industriel. This article is based on the International Symposium in Paris on Underwater Operations and Techniques 6-9 December 1982. It reviews the different methods now available for underwater operations (divers, remote-controlled vehicles, atmospheric-pressure submarines and various technological problems common to all of them (materials, remote manipulation, navigating, power sources. This field is evolving rapidly and makes use of the most recent technological innovations. Although remote-controlled vehicles now seem to be favored by industrialists, the other methods still have a promising future, and the complementariness of these methods can be expected to replace rivalry among them. The resurrection of the Argyronète project, which should become a test bench for new techniques in 1985, is a good illustration of the activity going on in this industrial sector.

  12. Influence of the Crude Oil Characterization on Mmp Calculation Influence de la caractérisation d'un pétrole brut sur le calcul de la pression minimale de miscibilité

    Directory of Open Access Journals (Sweden)

    Neau E.

    2006-11-01

    Full Text Available This paper focuses on the influence of the crude oil characterization on minimum miscibility pressure (MMP calculation. It is shown what kind of compounds may be lumped together in order to calculate the MMP with a good accuracy. In a first step, a selected crude oil is modeled with 37 pure compounds using the characterization procedure developed by Avaullée et al. (1997a in which two parameters of the distillation residue are fitted on the experimental bubble points. In this context, all the experimental data (PVT, swelling test, slim tube test are calculated with a very good accuracy. In a second step, the heavy intermediate, the middle intermediate and the light compounds are successively lumped. The influence of such lumping procedure on the calculated MMP is discussed. Dans cet article, nous étudions l'influence de la modélisation des coupes d'un pétrole brut sur la valeur calculée de la pression minimale de miscibilité (MMP. En particulier, il est expliqué quels types de constituants peuvent être regroupés sous forme d'un pseudo-constituant sans pour autant dégrader la valeur de la MMP. La procédure suivie dans cet article est simple : à partir d'un pétrole brut donné, nous utilisons dans un premier temps une représentation par 37 composants, exploitant l'information analytique standard disponible sur ce fluide. La modélisation des fractions lourdes utilisée est celle développée par Avaullée et al. (1997a , dans laquelle nous avons ajusté deux paramètres du résidu de distillation C(20+ sur les pressions de saturation expérimentales. Sur le fluide étudié, nous mettons en évidence le bon niveau de restitution des grandeurs volumétriques, des données expérimentales de gonflement ainsi que de la MMP mesurée lors d'une expérience de déplacement en tube mince. Dans un deuxième temps, les composés intermédiaires lourds, les intermédiaires moyens et les composants légers font successivement l'objet de

  13. Reconstruction de la surface de Fermi dans l'etat normal d'un supraconducteur a haute Tc: Une etude du transport electrique en champ magnetique intense

    Science.gov (United States)

    Le Boeuf, David

    Des mesures de resistance longitudinale et de resistance de Hall en champ magnetique intense transverse (perpendiculaire aux plans CuO2) ont ete effectuees au sein de monocristaux de YBa2Cu3Oy (YBCO) demacles, ordonnes et de grande purete, afin d'etudier l'etat fondamental des supraconducteurs a haute Tc dans le regime sous-dope. Cette etude a ete realisee en fonction du dopage et de l'orientation du courant d'excitation J par rapport a l'axe orthorhombique b de la structure cristalline. Les mesures en champ magnetique intense revelent par suppression de la supraconductivite des oscillations magnetiques des resistances longitudinale et de Hall dans YBa2Cu 3O6.51 et YBa2Cu4O8. La conformite du comportement de ces oscillations quantiques au formalisme de Lifshitz-Kosevich, apporte la preuve de l'existence d'une surface de Fermi fermee a caractere quasi-2D, abritant des quasiparticules coherentes respectant la statistique de Fermi-Dirac, dans la phase pseudogap d'YBCO. La faible frequence des oscillations quantiques, combinee avec l'etude de la partie monotone de la resistance de Hall en fonction de la temperature indique que la surface de Fermi d'YBCO sous-dope comprend une petite poche de Fermi occupee par des porteurs de charge negative. Cette particularite de la surface de Fermi dans le regime sous-dope incompatible avec les calculs de structure de bande est en fort contraste avec la structure electronique presente dans le regime surdope. Cette observation implique ainsi l'existence d'un point critique quantique dans le diagramme de phase d'YBCO, au voisinage duquel la surface de Fermi doit subir une reconstruction induite par l'etablissement d'une brisure de la symetrie de translation du reseau cristallin sous-jacent. Enfin, l'etude en fonction du dopage de la resistance de Hall et de la resistance longitudinale en champ magnetique intense suggere qu'un ordre du type onde de densite (DW) est responsable de la reconstruction de la surface de Fermi. L'analogie de

  14. Separation method for rare-earths using high-voltage electrophoresis on paper strip; Methode de separation des terres rares par electrophorese a haute tension sur papier - support

    Energy Technology Data Exchange (ETDEWEB)

    Clarence, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-07-01

    The equipment includes an electrophoresis set running at 3 000 V and 20 mA. Two cooling plates are used as heat exchanger, and a pneumatic pressure device to insure an uniform pressure on the paper strip laid flat. The mobilities and the separations of the rare earths in lactic, and, {alpha} hydroxy-isobutyric acid solutions are investigated on cellulose acetate strip. Better results are obtained with {alpha} hydroxy-isobutyric acid. The method is rapid and allows a fine fractionation of rare earth elements within less than an hour. A complete separation of a Ce - Pr - Nd - Pm - Eu mixture, and a Y - Tb mixture is obtained. (author) [French] L'equipement comporte un appareil d'electrophorese fonctionnant sous 3000 V a 20 mA. Deux plaques refrigerantes absorbent la chaleur dissipee, et un coussin pneumatique assure une pression uniforme sur le papier support. Les mobilites et les separations des terres rares sont etudiees en milieux lactiques et {alpha} hydroxyisobutyriques sur papier d'acetate de cellulose. De meilleurs resultats sont obtenus avec l'acide {alpha} hydroxyisobutyrique. La methode est tres rapide et permet de separer un melange de terres rares radioactives en moins d'une heure. Des separations fines d'un melange Ce, Pr, Nd, Pm, Eu, et d'un melange Y, Tb sont egalement obtenues. (auteur)

  15. Stabilisation en pression et en température du champ magnétique dans le piège à ions de précision d’ISOLTRAP au CERN

    CERN Document Server

    MARIE-JEANNE, M; BAN, G

    2005-01-01

    L’expérience ISOLTRAP, à ISOLDE au CERN, utilise la mesure de la fréquence cyclotron dans un piège de Penning pour en déduire avec une haute précision la masse des ions radioactifs produits par l’installation ISOLDE. Pour cette mesure de masse, une bonne homogénéité du champ magnétique au cours du temps est requise dans le piège. Or l’étude de l’erreur systématique a montré l’existence d’une dérive du champ magnétique en fonction du temps, à laquelle se superposent des fluctuations dépendant de la température. La courbe de dérive linéaire en fonction du temps ayant été évaluée, on souhaite mettre en place un système de régulation permettant d’atténuer les fluctuations du champ magnétique liées aux variations de la température. Ce dispositif constituera une amélioration technique pouvant conduire à la réduction de l’erreur systématique sur la mesure de masse. Ce rapport détaille l’installation d’un système de régulation de la pression de l’hélium ser...

  16. Effets Seebeck et Nernst dans les cuprates: Etude de la reconstruction de la surface de Fermi sous champ magnetique intense

    Science.gov (United States)

    Laliberte, Francis

    2010-06-01

    Ce memoire presente des mesures de transport thermoelectrique, les effets Seebeck et Nernst, dans une serie d'echantillons de supraconducteurs a haute temperature critique. Des resultats obtenus recemment au Laboratoire National des Champs Magnetiques Intenses a Grenoble sur La1.7Eu0.2Sr0.1 CuO4, La1.675Eu0.2Sr0.125CuO 4, La1.64Eu0.2Sr0.16CuO4, La1.74Eu0.1Sr0.16CuO4 et La 1.4Nd0.4Sr0.2CuO4 sont analyses. Une attention particuliere est accordee aux equations de la theorie semi-classique du transport et leur validite est verifiee. La procedure experimentale et les materiaux utilises pour concevoir les montages de mesures sont expliques en detail. Enfin, un chapitre est dedie a l'explication et l'interpretation des resultats de transport thermoelectrique sur YBa2Cu3O6+delta publies au cours de l'hiver 2010 dans les revues Nature et Physical Review Letters. Les donnees d'effet Seebeck dans les echantillons de La 1.8-x,Eu0.2SrxCuO 4, ou un changement de signe est observe, permettent de conclure a la presence d'une poche d'electrons dans la surface de Fermi qui domine le transport a basse temperature dans la region sous-dopee du diagramme de phase. Cette conclusion est similaire a celle obtenue par des mesures d'effet Hall dans YBa 2Cu3O6+delta et elle cadre bien dans un scenario de reconstruction de la surface de Fermi. Les donnees d'effet Nernst recueillies indiquent que la contribution des fluctuations supraconductrices est limitee a un modeste intervalle de temperature au-dessus de la temperature critique.

  17. HAUTE-SAVOIE AT CERN - French version only

    CERN Multimedia

    2003-01-01

    Vingt-deux entreprises présenteront le dernier cri de leur technologie à l'exposition "La Haute-Savoie au CERN". Elle est organisée par le Conseil Général de la Haute-Savoie. Une erreur s'est glissée dans le précédent agenda de l'exposition: il n'y aura pas de signature de convention entre le Conseil Général de la Haute-Savoie et le CERN à cette occasion. Du 10 au 14 novembre 2003 Hall du Bâtiment de l'Administration Bât. 60/61 - rez-de-ch. et 1er étage 09h00 - 17h30 Dates Thématiques Firmes concernées Conférences (Salle du Conseil) Horaires à fixer Evénements Lundi 10 nov Electronique Connectique et Multiplexage ALCATEL ALPES DEIS AMPHENOL-SOCAPEX NSI SENSOREX SETIUS SUSS MICROTEC "Présentation des Procédures d'Achats" "Le multiplexage: technologie d'avenir&quo...

  18. Geothermal potential of the Meuse/Haute-Marne site

    International Nuclear Information System (INIS)

    2015-01-01

    This report aims to analyze the geothermal potential of the Meuse/Haute-Marne site selected for the Cigeo project, primarily based on data available in the literature and particularly on those recently Acquired by Andra near this site. It also analyzes the report made on the same topic by Geowatt AG at The request of the CLIS of Bure. For the Meuse/Haute-Marne area relevant to Cigeo, the present report concludes to the existence of A low-energy geothermal resource in the lower Triassic. For the Permian and the basement, a medium To high-energy geothermal resource is conceivable, but its occurrence is hypothetical. Beneath the site, exploiting the Triassic would depend on the possibility of re-injecting the produced Brine. National and international experiences show the difficulty to carry out such a reinjection in Silty-clayey formations. The profitability of such exploitation in the Triassic, the Permian or in the basement is questionable. Indeed, the Meuse/Haute-Marne area neither shows an exceptional nature nor a specific interest Compared to other formations or zones for which either the geothermal potential is better Demonstrated, such as for instance the Dogger formation in the central part of the Paris basin with Easier exploitation conditions, or where the geothermal gradients are higher. (authors)

  19. Plate forme L3 informatique sous application android

    OpenAIRE

    BENDEDDOUCHE, Rida; BENAMARA, Mohammed El Amin

    2014-01-01

    Ce travail est présenté dans le cadre de notre projet de fin d’étude licence en informatique. Nous sommes actuellement dans une étape de transition de l’informatique fixe à l’informatique mobile. De jour en jour l’optimisation des smartphones ne cesse d’augmenter et cela grâce aux applications mobiles. Les smartphones utilisent plusieurs systèmes d’exploitation, une grande partie est sous Android. Les Smartphones et tablettes ont été conçus pour faciliter la vie quotidienne. En partant de ce ...

  20. Ifp's New Flexible Hydrocracking Process Combines Maximum Conversion with Production of High Viscosity, High Vi Lube Stocks Le nouveau procédé IFP d'hydrocraquage à haute flexibilité combine conversion maximum et production de bases, huile à haute viscosité et à indice de viscosité élevé

    Directory of Open Access Journals (Sweden)

    Hennico A.

    2006-11-01

    Full Text Available Institut Français du Pétrole (IFP has developed a new dual catalytic system for its hydrocracking process that enables high conversion to middle distillates and production of high viscosity, high VI lube stocks. Although the hydrocracking process is mainly devoted to the conversion of vacuum distillates, deasphalted oil or mixture of both into high quality middle distillates, it can also produce a residue, that after dewaxing will be a very high VI lube base oil. In this presentation major emphasis is put on the possibility to produce very high VI lubes with high viscosity thanks to the development of the new catalytic system. Large flexibility in feedstock selection and easy control of operating variables allow the production of all grades of lube oils associated with high quality middle distillates for a large range of conversion levels. L'Institut Français du Pétrole (IFP a mis au point, pour son procédé d'hydrocraquage, un nouveau système catalytique à 2 catalyseurs qui permet une forte conversion en distillats moyens et la production de fractions lubrifiantes à haute viscosité et indice de viscosité élevé. Si le procédé d'hydrocraquage est essentiellement utilisé pour la conversion de distillats sous vide, d'huile désasphaltée ou d'un mélange des deux en distillats moyens de haute qualité, il peut aussi produire un résidu qui, après déparaffinage, fournira une base pour lubrifiant à indice de viscosité très élevé. Cet article souligne particulièrement la possibilité de produire des lubrifiants à indice de viscosité très élevé et haute viscosité, grâce à ce nouveau système catalytique. Une grande flexibilité dans le choix des produits à traiter et la facilité de contrôle des paramètres opératoires permet la production de toutes les qualités d'huiles lubrifiantes associées à des distillats moyens de haute qualité, pour une large gamme de niveaux de conversion.

  1. La répression disciplinaire du harcèlement sexuel à l’université

    OpenAIRE

    Zarca, Alexis

    2017-01-01

    Alors que le voile se lève sur la réalité du harcèlement sexuel à l’université, des doutes subsistent quant à l’efficacité de la répression disciplinaire lorsque les faits ont été commis par un enseignant-chercheur. À la suite de quelques affaires où la sanction prononcée a pu être perçue comme trop clémente, ce sont les modalités spécifiques de cette répression, dont la plus emblématique est la règle du jugement par les pairs, qui se sont trouvées réinterrogées. Dans ce contexte, la loi du 4...

  2. Hauts-de-France. A pioneer in the French energy transition; Hauts-de-France. Vorreiter in der franzoesischen Energiewende

    Energy Technology Data Exchange (ETDEWEB)

    Falk, Thomas

    2016-08-15

    France had established in advance of last year's climate summit in Paris on ambitious energy policy goals. Especially the 2016 newly formed Region Hauts-de-France stands out as a pioneer here. There one drives innovation and investments with the objective of fulfilling by 2050 their own needs completely by renewable sources. The orientation to supplies Jeremy Rifkin idea of the third industrial revolution. If successful, the region would be on climate protection well ahead of the national targets, the 2050 ''only'' provide a CO{sub 2} emission reduction of 75%. In addition to the Research and development (R and D) to many future ideas in Hauts-de-France but also some major projects for Security of European energy supplies are realized that show the local agility. [German] Frankreich hatte sich im Vorfeld des letztjaehrigen Pariser-Klimagipfels auf ambitionierte Energiewendeziele festgelegt. Insbesondere die 2016 neu gebildete Region Hauts-de-France sticht dabei als Vorreiter heraus. Dort treibt man Innovationen und Investitionen mit dem Ziel an, bis 2050 den Eigenbedarf vollstaendig mittels erneuerbarer Quellen zu decken. Die Orientierung dazu liefert Jeremy Rifkins Idee der dritten industriellen Revolution. Im Erfolgsfall laege die Region beim Klimaschutz deutlich vor den nationalen Zielen, die bis 2050 ''nur'' eine CO{sub 2}-Emissionsreduktion von 75 % vorsehen. Neben der Forschung und Entwicklung (F and E) zu vielen Zukunftsideen werden in Hauts-de-France aber auch einige Grossprojekte zur Absicherung der europaeischen Energieversorgung realisiert, die Ausweis der dortigen Agilitaet sind.

  3. pression et niveau de fardeau chez les aidants familiaux des sujets déments en Tunisie

    Science.gov (United States)

    Ben Thabet, Jihène; Jaoua, Feriel; Charfi, Nada; Zouari, Lobna; Zouari, Nasreddine; Maalej, Mohamed

    2011-01-01

    Introduction La démence peut retentir lourdement sur les aidants familiaux du patient. Les objectifs de notre étude étaient de déterminer le niveau de fardeau et de la dépression chez les aidants familiaux de sujets déments, et d'identifier les facteurs associés à un niveau de fardeau élevé. Méthodes Il s'agissait d'une enquête auprès de 65 aidants tunisiens. Les niveaux de fardeau et de la dépression ont été évalués par, respectivement, l'inventaire de Zarit et l’échelle de Beck. Résultats Le taux des aidants qui avaient un niveau de fardeau élevé était de 52,3 %. Une dépression modérée ou sévère a été relevée chez 46,2 %. Un niveau de fardeau élevé était corrélé, du côté de l'aidant, avec le niveau socio-économique moyen à élevé, la cohabitation avec le patient, le fait d’être son conjoint, la réduction des activités quotidiennes et la sévérité de la dépression, et, du côté du dément, avec l'agressivité. Conclusion Les facteurs corrélés à un niveau de fardeau élevé orientent vers les cibles d'intervention et sont susceptibles d’être améliorés par la prise en charge, ce qui contribuerait à alléger la détresse des aidants. PMID:22384291

  4. Le harcèlement organisationnel des relations sous emprise

    CERN Document Server

    Guhel, Cécile

    2014-01-01

    Le lien entre harcèlement et emprise professionnelle est bien réel. Il est aussi puissant que destructeur. L'aide extérieure est importante mais la prise de conscience du sujet et sa mise à distance sont primordiales pour le retour à Soi. Un facteur de risque organisationnel est un facteur qui relève de l'organisation et qui comporte le risque ou la probabilité qu'un tel comportement abusif voie le jour et qu'il ait des effets négatifs. Un tel facteur peut également contribuer à la persistance ou à l'aggravation du comportement. En abordant la relation d'emprise sous l'éclairage de différentes théories psychologiques, cela vous permettra d'observer les mécanismes intrapsychiques conscients et inconscients qui sous-tendent les comportements de l'instigateur de la relation d'emprise d'une part, et de sa victime d'autre part. Enfin, à travers trois témoignages, de salariées en poste, vous découvrirez combien la parole sur le travail est importante dans la prise de conscience du processus de de...

  5. 76 FR 14697 - Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN...

    Science.gov (United States)

    2011-03-17

    ... Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN; Notice of Revised Determination... workers of Aleris Blanking and Rim Products, Inc., a division of Aleris International, Inc., Terre Haute... Blanking and Rim Products, Inc., a division of Aleris International, Inc., Terre Haute, Indiana, who became...

  6. Modélisation et caractérisation des joints collés à hautes vitesses de déformation Modeling and characterization of bonded joints at high strain rates

    Directory of Open Access Journals (Sweden)

    Bourel B.

    2013-11-01

    Full Text Available Ce papier traite de la modélisation de joints collés pour les structures soumises à des sollicitations de type crash. Cette nouvelle modélisation basée sur un élément cohésif tient compte du comportement viscoplastique, de l'endommagement ainsi que de la rupture de l'adhésive. Sensible à la vitesse de déformation l'identification du critère de rupture nécessite une base expérimentale allant jusqu'à de très hautes vitesses de déformations. Un nouveau dispositif d'essais a donc été mis en place sur les barres de Hopkinson afin de solliciter des assemblages à haute vitesse et sous différents angles de chargement. This paper deals with the modeling of bonded joints for structures subjected to dynamic crash loading. This new model based on a cohesive element takes into account the viscoelastic behavior, the damage and the failure of the adhesive. Due to the strain rate sensitivity, the identification of failure criterion requires experimental tests, up to very high strain rates. A new testing device has then been set up on the Hopkinson bar in order to load the assemblies with high strain rates and with different angles.

  7. Haute Couture in the Bronze Age: A History of Minoan Female Costumes from Thera

    DEFF Research Database (Denmark)

    Nosch, Marie-Louise Bech

    2008-01-01

    Haute Couture in the Bronze Age from Thera is investigated via frescoes and with a historiographical approach on the reception of Minoan culture in contemporary Greek history......Haute Couture in the Bronze Age from Thera is investigated via frescoes and with a historiographical approach on the reception of Minoan culture in contemporary Greek history...

  8. MANPOWER PROJECTIONS AND TRAINING NEEDS FORECAST TO 1975 FOR THE TERRE HAUTE AREA.

    Science.gov (United States)

    Indiana State Univ., Terre Haute.

    USING U.S. CENSUS BUREAU AND INDIANA EMPLOYMENT SECURITY DIVISION DATA, A PREVIOUS STUDY WAS UPDATED TO INCLUDE PROJECTIONS OF MANPOWER AND TRAINING NEEDS FOR THE TERRE HAUTE AREA. GRAPHS SHOW TRENDS FOR EIGHT OCCUPATIONAL GROUPS IN THE UNITED STATES, THE NATION'S URBAN AREAS, INDIANA, AND THE TERRE HAUTE STANDARD METROPOLITAN AREA. MANPOWER NEEDS…

  9. Study of thermocouples for control of high temperatures; Etude de thermocouples pour le reperage des hautes temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Villamayor, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Faculte des Sciences de l' Universite de Lyon - 69 (France)

    1967-07-01

    Previous works have shown that the tungsten-rhenium alloys thermocouples were a good instrument for control of high temperatures. From its, the author has studied the W/W 26 per cent and W 5 per cent Re/W 26 per cent Re french manufactured thermocouples and intended for control of temperatures in nuclear reactors until 2300 deg. C. In 'out-pile' study he determines the general characteristics of these thermocouples: average calibration curves, thermal shocks influence, response times, and alloys allowing the cold source compensation. The evolution of these thermocouples under thermal neutron flux has been determined by 'in-pile' study. The observations have led the author to propose a new type of thermocouples settled of molybdenum-columbium alloys. (author) [French] Des travaux anterieurs ont montre que les thermocouples des alliages tungstene-rhenium etaient susceptibles de reperer avec precision des hautes temperatures. A partir de la, l'auteur a etudie las thermocouples W/W 26 pour cent Re et W 5 pour cent Re/W 26 pour cent Re de fabrication francaise et destines au controle des temperatures dans les reacteurs nucleaires, jusqu'a 2300 deg. C Dans l'etude 'hors-pile' il a determine les caracteristiques generales de ces thermocouples: courbes d'etalonnage moyen, influence des chocs thermiques, temps de reponse, et alliages assurant la compensation de soudure froide. L'etude 'en-pile' a permis de rendre compte de l'evolution de ces thermocouples sous flux neutroniques. Les phenomenes observes ont conduit l'auteur a proposer un nouveau type de thermocouples constitues d'alliages molybdene-niobium. (auteur)

  10. Annual report of the Meuse/Haute-Marne Centre - 2011

    International Nuclear Information System (INIS)

    2012-09-01

    This report first presents the installations of the Meuse/Haute-Marne Centre, its equipment, its research laboratory in which the deep geological disposal of radioactive wastes is studied. Highlights of 2011 are outlined; they concern the exploitation, an inspection performed by the ASN, new installations, works and researches. The following chapter discusses the actions undertaken to limit incidents and accidents, and measures regarding radiation protection. The next parts address the impacts on the environment, the management of wastes produced by the Centre, and the actions undertaken with respect to information and transparency (visits, exhibition, publications, and relationships with local people, associations and social stakeholders)

  11. The Meuse/Haute-Marne Centre. Activity report 2013

    International Nuclear Information System (INIS)

    2014-09-01

    This activity report first presents the installations of the Meuse/Haute-Marne Centre (an underground laboratory, a technological centre, and 'ecotheque'), proposes some commented photos of important events (a sealing test, tunnel excavation and setting up of voussoirs, a visit of a minister, so on). The third part presents the arrangements related to safety and radiation protection, and the fourth part addresses the survey and control of impacts on the environment. Actions related to transparency and information are indicated: visits, exhibitions, animations, publications

  12. Changes in Meat Quality Characteristics of the Sous-vide Cooked Chicken Breast during Refrigerated Storage.

    Science.gov (United States)

    Hong, Go-Eun; Kim, Ji-Han; Ahn, Su-Jin; Lee, Chi-Ho

    2015-01-01

    This study was performed to investigate the changes in meat quality characteristics of the sous vide cooked chicken breast during refrigerated storage at 4℃ for 14 d between before and after sous-vide cooking. Cooking loss and shear force were significantly increased, whereas expressible drip was significantly decreased along with reduction in the water holding capacity in both of two groups. Redness of meat juice was significantly (p<0.05) increased during storage, and considerably increased in the refrigerated samples after sous-vide cooked at the 7 to 10 d. The thiobarbituric acid reactive substances (TBARS) was significantly increased and was higher in the refrigerator stored chicken breast samples after sous-vide cooking. The volatile basic nitrogen (VBN) value was significantly increased in both groups, but the VBN value of the stored raw meat sample before sous-vide cooking was increased at an early storage, while the VBN value of the stored sample after sous-vide cooking was increased gradually in this study. Total viable counts and coliform counts were significantly decreased during storage, and coliforms were not detected after 7 d of storage in both groups. Salmonella spp. was not detected during the whole studied period. The outcome of this research can provide preliminary data that could be used to apply for further study of chicken breast using sous-vide cooking method that could be attractive to consumers.

  13. Pollution urbaine : la France sous le dôme

    OpenAIRE

    Laurent, Eloi

    2017-01-01

    Un an exactement après avoir accueilli la COP21, Paris suffoquait début décembre sous un dôme de pollution, mais aussi Lyon, Villeurbanne, Marseille, Avignon, Rouen ou Grenoble. Airparif, qui a relevé un niveau de particules fines de 146 µg/m3 à Paris en moyenne pour le 1er décembre, précisait dans un communiqué qu’il s’agissait là d’un des pics hivernaux de pollution les plus sévères de ces dix dernières années, les précédents remontant à janvier 2009 et décembre 2007.

  14. Detection and localisation of very high energy particles in underwater acoustic; Detection et localisation de particules de tres hautes energies en acoustique sous-marine

    Energy Technology Data Exchange (ETDEWEB)

    Juennard, N

    2007-12-15

    The theme of this thesis is included in the Antares international project whose object is to build a neutrino telescope located in a deep water environment in the Mediterranean sea. In deep water sea, a neutrino can interact with a water molecule. The collision generates a luminous flash and an acoustic wave. The goal of this work is to study this acoustic sound wave and develop a system able to detect the corresponding wave front and to estimate the initial direction of the particle. We first focus on the acoustic sound wave. Two different models are studied, and works made recently have led to a mathematical expression of both signal and wave front. Then, several detection methods are studied, from the most classical to the more recent ones. The experimental comparison in semi-real situation leads to the choice of a detection method: the Extended stochastic matched filter. Position and direction of the neutrino are now estimated with a Gauss-Newton inspired algorithm. This estimator is based on a wave front propagation model and on the time detection information given by the telescope hydro-phones. Performances of the system are then estimated. An antenna structure is then proposed and a global simulation finalizes this thesis. In this simulation, detection and estimation are based on the results found in the previous sections. Underwater sea noise is real and the results of the simulation valid our works. (author)

  15. Experimental and theoretical study of phase transitions under ball milling; Etude experimentale et modelisation des changements de phases sous broyage a haute energie

    Energy Technology Data Exchange (ETDEWEB)

    Pochet, P

    1998-12-31

    The aim of this work was to determine how phase transition s under ball-milling depend on the milling conditions and to find out if one can rationalize such transitions with the theory of driven alloys. We have chosen two phase transitions: the order-disorder transition in Fe Al and the precipitation-dissolution NiGe. In the case of Fe Al we have found that the steady-state long range order parameter achieved under ball milling intensity; moreover the same degree of order is achieved starting from an ordered alloy or a disordered solid solution. On the way to fully disordered state the degree of order either decreases monotonically or goes through a short lived transient state. This behaviour is reminiscent of a first order transition while the equilibrium transition is second order. All the above features are well reproduced by a simple model of driven alloys, which was originally build for alloys under irradiation. The stationary degree of order results of two competitive atomic jump mechanisms: the forced displacements induced by the shearing of the grains, and the thermally activated jumps caused by vacancies migrations. Finally we have performed atomistic simulations with a Monte Carlo kinetic algorithm, which revealed the role of the fluctuations in the intensity of the forcing. Moreover we have shown that specific atomistic mechanisms are active in a dilute NiGe solid solution which might lead to ball milling induced precipitation in under-saturated solid solution. (author). 149 refs.

  16. Experimental and theoretical study of phase transitions under ball milling; Etude experimentale et modelisation des changements de phases sous broyage a haute energie

    Energy Technology Data Exchange (ETDEWEB)

    Pochet, P

    1997-12-31

    The aim of this work was to determine how phase transition s under ball-milling depend on the milling conditions and to find out if one can rationalize such transitions with the theory of driven alloys. We have chosen two phase transitions: the order-disorder transition in Fe Al and the precipitation-dissolution NiGe. In the case of Fe Al we have found that the steady-state long range order parameter achieved under ball milling intensity; moreover the same degree of order is achieved starting from an ordered alloy or a disordered solid solution. On the way to fully disordered state the degree of order either decreases monotonically or goes through a short lived transient state. This behaviour is reminiscent of a first order transition while the equilibrium transition is second order. All the above features are well reproduced by a simple model of driven alloys, which was originally build for alloys under irradiation. The stationary degree of order results of two competitive atomic jump mechanisms: the forced displacements induced by the shearing of the grains, and the thermally activated jumps caused by vacancies migrations. Finally we have performed atomistic simulations with a Monte Carlo kinetic algorithm, which revealed the role of the fluctuations in the intensity of the forcing. Moreover we have shown that specific atomistic mechanisms are active in a dilute NiGe solid solution which might lead to ball milling induced precipitation in under-saturated solid solution. (author). 149 refs.

  17. Synthèse, caractérisation et application aux huiles lubrifiantes d'additifs polymères phosphosoufrés améliorants de VI, antiusure et extrême pression Phosphosulphurized Antiwear and Extreme-Pressure Vi Polymer Additives, Synthesis, Characterization and Lubricant Applications

    Directory of Open Access Journals (Sweden)

    Keromest C.

    2006-11-01

    Full Text Available Des copolymères de méthacrylates d'alkyle (PMA et un copolymère d'éthylène et de propylène (OCP, utilisables comme additifs améliorants d'indice de viscosité des huiles lubrifiantes, ont été préparés en leur incorporant des motifs fonctionnels anti-usure et extrême pression (AU-EP, sous la forme d'esters dithiophosphoriques ; les performances mécaniques des produits ont été pré-évaluées au moyen d'une machine quatre billes. Polyalkylmetlhacrylates (PMA and an ethylene/propylene copolymer (OCP, usable both as lubricant VI improver and antiwear extreme-pressure (AW-EP additives, were prepared by introducing AW-EP functional moieties on PMA and OCP back-bones under the form of dialkyldithiophosphoric esters; mechanical performances of these polymers were pre-assessed by means of a four-ball machine.

  18. Behaviour of uranium under irradiation; Comportement de l'uranium sous irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Adda, Y; Mustelier, J P; Quere, Y [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    phase alloys (U Nb, U Mo) the size and distribution of the bubbles are greatly influenced by the existence of a polygonization lattice, formed before irradiation, inside the grains. During high temperature annealings the bubbles situated on the polygonization lattice grow much faster than those which are distributed inside the crystal. In the case of uranium the bubbles are either distributed at random, or grouped in flat accumulations which can give rise to transgranular cracks, according to the state of the metal and the irradiation temperature. At high temperature an intergranular de-cohesion is also observed. (authors) [French] On expose les principaux resultats obtenus dans l'etude de la formation des defauts introduits dans l'uranium par la fission a basse temperature. Par irradiation a 20 K on a pu evaluer le nombre de paires de Frenkel produites par une fission. L'analyse des courbes de variation de resistivite electrique a permis de preciser l'etendue des pointes de deplacement (deplacement Spike) et le mecanisme de la creation des defauts dus a la fission. Des irradiations a 77 K ont apporte des precisions supplementaires et indiquent un comportement different de l'uranium recristallise et ecroui. On a etudie la diffusion des gaz rares a partir d'alliages metal-gaz rare obtenus par decharge electrique et d'echantillons d'uranium irradie. Le degagement des gaz rares sous vide n'est controle par un processus de diffusion simple que dans le cas ou la teneur en gaz rare est tres faible (U tres faiblement irradie). Par contre quand la teneur en gaz rare est plus forte (echantillons prepares par decharge electrique) le degagement du gaz se produit par formation, croissance et coalescence de bulles; le coefficient de diffusion apparent est alors tres different du coefficient vrai et ne peut etre utilise dans les calculs de gonflement. Dans le cas d'un processus de diffusion simple on a etudie les differents facteurs qui regissent le phenomene. On a montre en

  19. Vacuum welding of metals; Soudage des metaux sous vide

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J A; Briola, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    This new welding process has been developed by the Commissariat a l'Energie Atomique (CEA) in France. The edges of the work-pieces are melted by the impact of an electron beam produced by an electron gun. Welding is carried out in a vacuum of 10{sup -4} to 10{sup -8} mm of mercury. The welding machine consists, diagrammatically, of: a) a metal enclosure in which a vacuum is produced; b) a cathode for electron emission, a high-voltage generator for accelerating these electrons, a focusing device; c) a mechanical device for moving (rotating) the work-piece. Advantages of the process: 1) possible welding of highly oxidizable metals (e.g. zirconium); 2) fabrication of high-vacuum-sealed metal containers; 3) production of very deeply penetrated welds. Therefore, this new process is particularly advantageous for atomic power applications, the fabrication of electron tubes and, more generally, for all industries in which very special metals are used. (author) [French] Ce procede de soudage a ete recemment mis au point au Commissariat a l'Energie Atomique en France (CEA). Il consiste a utiliser, pour fondre les levres des pieces a souder, l'impact d'un faisceau d'electrons produit par un canon a electrons. Le soudage s'effectue sous un vide de 10{sup -4} a 10{sup -8} mm de mercure. La machine a souder se compose schematiquement: a) d'une enceinte metallique ou l'on fait le vide; b) d'une cathode emettant des electrons, d'un generateur H.T. permettant d'accelerer ces electrons d'un dispositif de focalisation; c) d'un dispositif mecanique permettant le deplacement (rotation) de la piece a souder. Avantages de ce procede: 1) possibilite de souder les metaux tres oxydables (exemple: zirconium); 2) realisation de 'containers' metalliques fermes sous vide pousse; 3) obtention de profondeurs de soudures considerables. Ce nouveau procede est donc particulierement interessant pour l ' energie atomique, la fabrication des tubes electroniques et, en general, toutes les industries

  20. Meuse/Haute-Marne Centre. Annual report 2009

    International Nuclear Information System (INIS)

    2010-01-01

    The Meuse/Haute-Marne Centre belongs to the ANDRA (the French national agency for radioactive waste management) and is a site dedicated to investigations and researches on deep and reversible storage of high and medium activity long life wastes. This report briefly presents its installations, evokes some activities, events and works which occurred in 2009. It addresses how possible releases are controlled through a survey of the environment by means a range of different kinds of measurements. It describes the specific measures which have implemented in terms of radioprotection for the dismantling of a peculiar operation. It also describes measures implemented to ensure work security and evokes work accidents which occurred in 2009. It presents actions in the field of public information

  1. Heat extraction from deep rocks at Soultz-sous-Forets

    International Nuclear Information System (INIS)

    Gerard, A.; Baumgaeriner, J.; Baria, R.

    1996-01-01

    A European coordinated research program for the study of hot-dry-rock systems is in progress at Soultz-sous-Forets (Alsace, France). The aim of this project is the extraction of heat from the granite batholiths distributed along the Rhine graben. The technique used involves important forced water circulations under relatively low-pressures using the natural geologic fractures network. The region concerned extends about 3000 km 2 under both the French and the German territories. The program started in 1987 with preliminary scientific investigations followed by a feasibility study. In December 1995, two deep wells, GPK1 (3600 m) and GPK2 (3900 m) were available and equipped for hydraulic testing. Temperatures encountered can reach 168 C at 3800 m with a geothermal gradient exceeding 3.5 C/100 m below 3600 m. The tests performed have shown that the hydraulic performances of these wells can be considerably improved using a simple well stimulation technique. (J.S.). 1 fig

  2. Nutrition et sécurité alimentaire dans les hautes terres du Vietnam et ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Nutrition et sécurité alimentaire dans les hautes terres du Vietnam et de la Thaïlande. La malnutrition demeure un problème grave au Vietnam et en Thaïlande, surtout dans les hautes terres, où vivent la plupart des minorités ethniques. Ces collectivités connaissent actuellement des changements socioéconomiques ...

  3. CERN pursues its partnership with the Department of Haute-Savoie

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    The third framework agreement between CERN and the Department of Haute-Savoie was signed at an official ceremony in Archamps, Haute Savoie, on 4 February 2010. The main theme of the agreement, which lays down the guidelines for collaboration between the two parties, is the transfer of knowledge and technology.   Christian Monteil (left), Chairman of the General Council of Haute-Savoie and Rolf Heuer, Director-General of CERN after the third signature of the convention-cadre between Haute-Savoie and CERN. CERN and Haute Savoie have a long tradition of cooperation. Fourteen years after their first agreement (see box), the two parties have just signed a third framework agreement that adds knowledge transfer to the range of items covered. The Department of Haute-Savoie wishes to place the focus on advanced and unique training in areas where CERN has considerable expertise. "Two highly successful schools in which CERN is directly involved, one on accelerator physics and the other on medical ap...

  4. The Conseil Général of Haute-Savoie comes to CERN

    CERN Multimedia

    2008-01-01

    On Tuesday, 27 May 2008, in the framework of cooperation between CERN and the French Department of Haute-Savoie, the new president of the Conseil Général of Haute-Savoie, Christian Monteil, visited CERN, accompanied by newly-elected Department representatives and officials. The Conseil Général of Haute-Savoie visited the CLIC-CTF3 site.The cooperation between CERN and Haute-Savoie, which dates back to 1996, concerns scientific activities and technology transfer. In his introductory remarks, CERN Director-General Robert Aymar stressed the importance that CERN attaches to good relations with the Department of Haute-Savoie. Then J.J. Blaising, Head of the PH Department and CERN’s liaison officer for Haute-Savoie, presented a short introduction to CERN, which was followed by a lively question-and-answer session underlining our guests’ interest in and curiosity about CERN. The visitors toured ATLAS, then went on to see a small exh...

  5. Preparation of high critical temperature YBa{sub 2}Cu{sub 3}O{sub 7} superconducting coatings by thermal spray; Elaboration par projection a chaud de revetements supraconducteurs a haute temperature critique de type YBa{sub 2}Cu{sub 3}O{sub 7}

    Energy Technology Data Exchange (ETDEWEB)

    Lacombe, Jacques

    1991-09-20

    The objective of this research thesis is the elaboration of YBa{sub 2}Cu{sub 3}O{sub 7} superconducting coatings by thermal spray. These coatings must have a high adherence, a high cohesion, and the best possible electrical characteristics. The author first briefly presents physical-chemical characteristics of this ceramic, and proposes a bibliographical synthesis on thick coatings prepared by thermal spray. In the next parts, he studies and describes conditions of elaboration of poly-granular coatings of YBa{sub 2}Cu{sub 3}O{sub 7}, and their structural and electric characteristics [French] Des revetements epais de YBa{sub 2}Cu{sub 3}O{sub 7} ont ete elabores par projection a chaud sur des substrats d'acier inoxydable revetus d'une sous-couche de Ni-Cr-Al-Y. Les principales etapes du processus de fabrication sont les suivantes: - preparation de la poudre par voie humide selon un procede mis au point au C.E.R.E.M., - realisation des revetements epais par projection a chaud de cette poudre selon trois differentes techniques: projection plasma atmospherique, projection plasma sous pression reduite, projection flamme oxyacetylenique. - traitement thermique en deux etapes des revetements pour recristalliser la phase YBa{sub 2}Cu{sub 3}O{sub 7} et la reoxygener (traitement thermique dans un four sous oxygene). Les depots elabores selon cette voie sont adherents et homogenes a la fois en composition et en morphologie. La phase supraconductrice YBa{sub 2}Cu{sub 3}O{sub 7} determinee par diffraction de rayons X est bien cristallisee; elle se presente sous forme de plaquettes d'environ 10 μm de long et 1 μm d'epaisseur sans orientation preferentielle. Les revetements realises par projection plasma atmospherique presentent les meilleures caracteristiques electriques: Tc(R=0) = 90.5K; ΔTc = 1K; ρ (300 K) = 0.7 - 0.8 mΩ.cm; Jc(77 K,0 T) = 1000 A/cm{sup 2}. Les proprietes d'ecrantage magnetique ont ete comparees a celles de materiaux utilises pour le blindage magnetique

  6. Experience feedback examination in PWR type reactors operating for the 1997-1999 period; Examen du retour d'experience en exploitation des reacteurs a eau sous pression pour la periode 1997-1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The present report is relative to the examination that the permanent group has made on the experience feedback in operation for PWR type reactors for the period 1997-1999 that was on eleven themes chosen by the Nuclear Safety and Radiation Protection Authority. It used analysis reports made by I.R.S.N. in support of four meetings of the permanent group devoted to this examination from April 2001 to June 2002. The different themes were operating uncertainties, machining to vibrations, analysis of incidents and gaseous releases, circuits, human factors, behaviour of electric batteries, risk of cold source loss. (N.C.)

  7. A multi-agent design for a pressurized water reactor (P.W.R.) control system; Modelisation multi-agents pour la conduite d'un reacteur a eau sous pression (REP)

    Energy Technology Data Exchange (ETDEWEB)

    Aimar-Lichtenberger, M. [Paris-11 Univ., 91 - Orsay (France)

    1999-01-01

    This PhD work is in keeping with the complex industrial process control. The starting point is the analysis of control principles in a Pressurized Water Reactor (P.W.R). In order to cope with the limits of the present control procedures, a new control organisation by objectives and means is defined. This functional organisation is based on the state approach and is characterized by the parallel management of control functions to ensure the continuous control of the installation essential variables. With regard to this complex system problematic, we search the most adapted computer modeling. We show that a multi-agent system approach brings an interesting answer to manage the distribution and parallelism of control decisions and tasks. We present a synthetic study of multi-agent systems and their application fields.The choice of a multi-agent approach proceeds with the design of an agent model. This model gains experiences from other applications. This model is implemented in a computer environment which combines the mechanisms of an object language with Prolog. We propose in this frame a multi-agent modeling of the control system where each function is represented by an agent. The agents are structured in a hierarchical organisation and deal with different abstraction levers of the problem. Following a prototype process, the validation is realized by an implementation and by a coupling to a reactor simulator. The essential contributions of an agent approach turn on the mastery of the system complexity, the openness, the robustness and the potentialities of human-machine cooperation. (author)

  8. Study of water radiolysis in relation with the primary cooling circuit of pressurized water reactors; Etude sur la radiolyse de l`eau en relation avec le circuit primaire de refroidissement des reacteurs nucleaires a eau sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Pastina, B

    1997-07-01

    This memorandum shows a fundamental study on the water radiolysis in relation with the cooling primary circuit of PWR type reactors. The water of the primary circuit contains boric acid a soluble neutronic poison and also hydrogen that has for role to inhibit the water decomposition under radiation effect. In the aim to better understand the mechanism of dissolved hydrogen action and to evaluate the impact of several parameters on this mechanism, aqueous solutions with boric acid and hydrogen have been irradiated in a experimental nuclear reactor, at 30, 100 and 200 Celsius degrees. It has been found that, with hydrogen, the water decomposition under irradiation is a threshold phenomenon in function of the ratio between the radiation flux `1` B(n, )`7 Li and the gamma flux. When this ratio become too high, the number of radicals is not sufficient to participate at the chain reaction, and then water is decomposed in O{sub 2} and H{sub 2}O{sub 2} in a irreversible way. The temperature has a beneficial part on this mechanism. The iron ion and the copper ion favour the water decomposition. (N.C.). 83 refs.

  9. Study of colloidal particles behaviour in the PWR primary circuit conditions; Etude du comportement des particules colloidales dans les conditions physicochimiques du circuit primaire des reacteurs a eau sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Barale, M

    2006-12-15

    EDF wants to understand, model and limit primary circuit contamination of Pressurized Water Reactors by colloidal particles resulting from corrosion. The electrostatic behaviour of representative oxide particles (cobalt ferrite, nickel ferrite and magnetite) has been studied in primary circuit conditions with the influence of boric acid and lithium hydroxide. The isoelectric point (IEP) and the point of zero charge (PZC) of particles, measured between 5 C and 320 C, exhibit a minimum towards 200 C. The thermodynamic constants of the protonation equilibrium of surface sites were calculated. When boric acid is added, zeta potential and IEP decrease because of borate ions sorption. On the contrary, there is not effect of lithium ions. The modelling of these results under conditions representative of primary circuit shows that these oxides exhibit a negative surface charge, explaining their sorption and adhesion behaviour. (author)

  10. Contribution to the optimization of the chemical and radiochemical purification of pressurized water nuclear power plants primary coolant; Contribution a l'optimisation de la purification chimique et radiochimique du fluide primaire des centrales nucleaires a eau sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Elain, L

    2004-12-15

    The primary coolant of pressurised water reactors is permanently purified thanks to a device, composed of filters and the demineralizers furnished with ion exchange resins (IER), located in the chemical and volume control system (CVCS). The study of the retention mechanisms of the radio-contaminants by the IER implies, initially, to know the speciation of the primary coolant percolant through the demineralizers. Calculations of theoretical speciation of the primary coolant were carried out on the basis of known composition of the primary coolant and thanks to the use of an adapted chemical speciation code. A complementary study, dedicated to silver behaviour, considered badly extracted, suggests metallic aggregates existence generated by the radiolytic reduction of the Ag{sup +} ions. An analysis of the purification curves of the elements Ni, Fe, Co, Cr, Mn, Sb and their principal radionuclides, relating to the cold shutdown of Fessenheim 1-cycle 20 and Tricastin 2-cycle 21, was carried out, in the light of a model based on the concept of a coupling well term - source term. Then, a thermodynamic modelling of ion exchange phenomena in column was established. The formation of the permutation front and the enrichment zones planned was validated by frontal analysis experiments of synthetic fluids (mixtures of Ni(B(OH){sub 4}){sub 2}, LiB(OH){sub 4} and AgB(OH){sub 4} in medium B(OH){sub 3})), and of real fluid during the putting into service of the device mini-CVCS at the time of Tricastin 2 cold shutdown. New tools are thus proposed, opening the way with an optimised management of demineralizers and a more complete interpretation of the available experience feedback. (author)

  11. ALIBABA, an assistance system for the detection of confinement leaks in a PWR reactor; ALIBABA, un systeme d`aide a la detection des voies de fuites du confinement sur un reacteur a eau sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Bedier, P.O.; Libmann, M. [CEA Centre d`Etudes de Saclay, 91 - Gif-sur-Yvette (France). Dept. de Mecanique et de Technologie

    1995-12-31

    The objective of the Crisis Technical Center (CTC) of the French Institute for Nuclear Protection and Safety (IPSN) is to estimates the consequences of a given nuclear accident on the populations and the environment. ALIBABA is a data processing tool available at the CTC and devoted to the detection of confinement leaks in 900 MWe PWR reactors using the activity values measured by the captors of the installation. The heart of this expert system is a structural and functional representation of the different components directly involved in the leak detection (isolating valves, ventilation systems, electric boards etc..). This tool can manage the availability of each component to make qualitative and quantitative balance-sheets. This paper presents the ALIBABA software, an industrial prototype realized with the SPIRAL knowledge base systems generator at the CEA Reactor Studies and Applied Mathematics Service (SERMA) and commercialized by CRIL-Ingenierie Society. It describes the techniques used for the modeling of PWR systems and for the visualization of the survey. The functionality of the man-machine interface is discussed and the means used for the validation of the software are summarized. (J.S.). 6 refs.

  12. Pharmacothérapie de la dépression chez les aînés

    Science.gov (United States)

    Frank, Christopher

    2014-01-01

    Résumé Objectif Discuter du traitement pharmacologique de la dépression chez les personnes âgées, y compris le choix des antidépresseurs, le titrage de la dose, la surveillance de la réponse et des effets secondaires et le traitement des cas réfractaires. Sources des données Les lignes directrices de 2006 de la Canadian Coalition for Seniors’ Mental Health sur l’évaluation et le traitement de la dépression ont servi comme source principale. Pour recenser les articles publiés après les lignes directrices, on a procédé à une recherche documentaire dans MEDLINE de 2007 à 2012 à l’aide des expressions en anglais depression, treatment, drug therapy et elderly. Message principal Le but du traitement devrait être la rémission des symptômes. L’amélioration des symptômes peut être surveillée en fonction des objectifs du patient qu’on a identifiés ou en se servant d’outils cliniques comme le Patient Health Questionnaire–9. On devrait envisager le traitement en 3 étapes: l’étape du traitement aigu pour obtenir la rémission des symptômes, une étape de continuation pour prévenir la récurrence d’un même épisode de la maladie (rechute) et une étape de maintien (prophylaxie) pour prévenir de futurs épisodes (récurrence). Le dosage initial devrait être la moitié de la dose de départ habituelle chez l’adulte et il devrait être titré régulièrement jusqu’à ce que le patient réponde, jusqu’à ce que la dose maximale soit atteinte ou encore que les effets secondaires en limitent l’augmentation. Parmi les effets secondaires fréquents, on peut mentionner les chutes, la nausée, les étourdissements, les céphalées et, moins communément, l’hyponatrémie et des changements dans l’intervalle QT. Des stratégies pour changer ou augmenter les antidépresseurs sont présentées. Les patients plus âgés devraient être traités pendant au moins un an à compter de l’observation d’une amélioration clinique et

  13. Comportement des fondations et des ancrages de structures marines sous l'effet de sollicitations cycliques Behavior of Foundations and Anchors for Marine Structures under the Effect of Cyclic Stresses

    Directory of Open Access Journals (Sweden)

    Le Tirant P.

    2006-11-01

    Full Text Available L'exploration et l'exploitation des hydrocarbures en haute mer conduisent à la mise en place d'ouvrages fixes ou flottants de dimensions de plus en plus colos sales, par des profondeurs d'eau sans cesse croissantes, atteignant actuellement 200 à 300 mètres en production, un millier de mètres en exploration. Les fondations des ouvrages pétroliers de production comprennent essentiel-lement- les pieux ou groupes de pieux, battus ou forés; - les fondations superficielles à embase poids. Le comportement des fondations ou ancrages de structures sous l'action des sollicitations cycliques est étudié, en fonction de la nature des terrains, à partir - de mesures et d'observations sur des structures réelles; d'expérimentations sur des modèles en semi-grandeur ou de simulations sur modèles réduits. Les exemples donnés situent la diversité des problèmes rencontrés pour l'instal-lation des ouvrages en haute mer et! l'ampleur des travaux nécessaires pour décrire plus correctement les phénomènes d'intéraction sols-structures mannes sous l'effet des chargements cycliques et transitoires et, par suite, mieux optimiser le dimensionnement des fondations et des ancrages. Exploration and production of hydrocarbons in the high seas lead ta the installation of fixed or floating structures having more and more colossal sizes at constantly increasing water depths which now attain 200 ta 300 meters for production and 1000 meters for exploration. The foundations of ail production structures mainly consist of - pilings or groups of pilings, either driven or drilled; superficial gravity foundations the behovior of foundations or anchors for such structures under the effect of cyclic stresses is examined as a function of the nature of formations, on the basis of - measurements and observations on actual structures, experiments with semi-full-sized models or by simulations with scale models. The examples given illustrate the diversity of the problems

  14. Al-Ḥudayyda sous occupation ottomane (1849-1918

    Directory of Open Access Journals (Sweden)

    Patrice Chevalier

    2011-12-01

    Full Text Available Petit port de pêche situé sur les côtes de la mer Rouge, al-Ḥudayyda change progressivement de statut et de dimensions avec l’arrivée de l’armée ottomane en 1839. Al-Ḥudayyda se voit alors choisi comme l’un des points stratégiques (militaire et politique du dispositif colonial ottoman.Grâce aux différentes infrastructures mises en place par l’administration ottomane, mais aussi grâce à l’ouverture du canal de Suez en 1869, le village attire peu à peu une population multi-ethnique et cosmopolite venue y commercer ou simplement y trouver refuge, dans un contexte politique régional passablement agité. D’une centaine de Yéménites à l’origine, il compte 42 000 âmes à la veille de la première guerre mondiale.La cohabitation sous administration ottomane va-t-elle générer ou non des échanges ou emprunts entre les différentes communautés ? Les Ottomans vont-ils réussir à transcender les multiples appartenances identitaires au profit d’une appartenance citoyenne à l’empire, comme le prévoit leur ambitieux programme de réformes ? La ville d’al- Ḥudayyda sera-t-elle dotée d’une identité spécifique suffisamment forte pour que les individus appartenant aux différentes communautés présentes s’identifient à la ville ? Voilà quelques-unes des questions auxquelles cet article tente de répondre.

  15. Le sous-titrage : une pratique à la marge de la traduction

    Directory of Open Access Journals (Sweden)

    Dumas, Louise

    2014-12-01

    Full Text Available Le sous-titre interlinguistique est un objet difficile à appréhender théoriquement. S'il permet d'aller d'une langue à une autre, il implique aussi un passage de l'écoute à la lecture et du cinéma à l'écriture. Le caractère interlinguistique est souvent mis en avant pour amener à considérer le sous-titrage comme une traduction. Sa complexité médiologique suggère toutefois qu'il est plus qu'une traduction. En même temps, les fortes contraintes (exigence de brièveté, de lisibilité, de cohérence avec l'image cinématographique auxquelles il est soumis font qu'il est moins qu'une traduction – moins exact, moins long, moins « équivalent » au texte original. Le présent travail se propose de réfléchir de manière théorique aux rapports entre sous-titrage et traduction. Pour ce faire, nous confronterons le sous-titrage aux concepts fondamentaux de la traductologie. Premièrement, le passage de l'oral à l'écrit opéré dans les sous-titres est intimement lié à la distinction traductologique entre traduction et interprétariat. Pour pouvoir condenser les dialogues, résumer leur contenu, le sous-titreur est amené à les interpréter, ce qui permet de souligner l'étroite parenté entre traduction, interprétariat et interprétation. Deuxièmement, les fortes contraintes auxquelles sont soumis les sous-titres invitent à s'interroger sur la notion d'équivalence qui se trouve normalement au principe de toute traduction. Toutes les théories traductologiques insistent sur le fait qu'une équivalence n'est jamais parfaite et que le traducteur privilégie certains niveaux d'équivalence : en poussant à l'extrême cette dynamique de sélection constitutive de l'équivalence, on peut considérer que les sous-titres sont équivalents aux dialogues. En tant que cas limite, le sous-titrage permet de tester les concepts fondamentaux de la traductologie et de définir leurs limites.

  16. Effect of carbon on the oxidation of zirconium; Influence du carbone sur l'oxygenation du zirconium a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Chauvin, G; Boudouresques, B; Coriou, H; Hure, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    The study of specimens contaminated by different amounts of carbon shows a deleterious effect of this element in the resistance of zirconium to high temperature oxidation (700 to 900 deg. C). We drew the following results: a) the white spots or 'pimples' observed by numerous authors seem to be caused by the oxidation of precipitated carbides. We suggest a mechanism of formation and growth of these pimples; b) for a certain carbon content, the resistance to oxidation is increased by an uniform dispersion of the carbide phase and decreased, for instance, by extrusion textures. In this case, for the more marked textures, the more oriented corrosion was observed; c) by burning of the carbide phase it can result a second reaction increasing the corrosion rate; d) thin zirconium foils undergoes dimensional changes when scaling in oxygen. This unusual feature is also subordinated to carbon content and specially to the carbide phase dispersion. (author) [French] L'etude d'echantillons differemment contamines par le carbone nous a permis de mettre en evidence l'action particulierement nocive de cet element sur la resistance du zirconium a la corrosion par l'oxygene a haute temperature (700 a 900 deg. C). Nous avons pu degager les resultats essentiels suivants: a) l'origine des pustules d'oxyde blanc signalees par de nombreux auteurs doit etre recherchee dans l'oxydation des carbures precipites. Nous suggerons un mecanisme de formation et de croissance de ces pustules, b) la tenue du metal est d'autant meilleure que, pour une meme teneur en carbone, la phase 'carbure' est plus uniformement dispersee. En consequence, si la dispersion est mauvaise, on observe selon l'axe des textures de filage, par exemple, une corrosion preferentielle d'autant plus accentuee que les textures sont plus marquees, c) la combustion de la phase 'carbure' peut engendrer une reaction secondaire susceptible d'accroitre la cinetique de corrosion, d) l'expansion des grandes faces d

  17. High pressure generation by laser driven shock waves: application to equation of state measurement; Generation de hautes pressions par choc laser: application a la mesure d'equations d'etat

    Energy Technology Data Exchange (ETDEWEB)

    Benuzzi, A

    1997-12-15

    This work is dedicated to shock waves and their applications to the study of the equation of state of compressed matter.This document is divided into 6 chapters: 1) laser-produced plasmas and abrasion processes, 2) shock waves and the equation of state, 3) relative measuring of the equation of state, 4) comparison between direct and indirect drive to compress the target, 5) the measurement of a new parameter: the shock temperature, and 6) control and measurement of the pre-heating phase. In this work we have reached relevant results, we have shown for the first time the possibility of generating shock waves of very high quality in terms of spatial distribution, time dependence and of negligible pre-heating phase with direct laser radiation. We have shown that the shock pressure stays unchanged as time passes for targets whose thickness is over 10 {mu}m. A relative measurement of the equation of state has been performed through the simultaneous measurement of the velocity of shock waves passing through 2 different media. The great efficiency of the direct drive has allowed us to produce pressures up to 40 Mbar. An absolute measurement of the equation of state requires the measurement of 2 parameters, we have then performed the measurement of the colour temperature of an aluminium target submitted to laser shocks. A simple model has been developed to infer the shock temperature from the colour temperature. The last important result is the assessment of the temperature of the pre-heating phase that is necessary to know the media in which the shock wave propagates. The comparison of the measured values of the reflectivity of the back side of the target with the computed values given by an adequate simulation has allowed us to deduce the evolution of the temperature of the pre-heating phase. (A.C.)

  18. Caractérisation expérimentale de la propagation d’une flamme laminaire dans un milieu diphasique (brouillard) à haute pression et en microgravité

    OpenAIRE

    Nassouri , Mouhannad

    2014-01-01

    Spray and aerosol cloud combustion accounts for 25% of the world’s energy use, and yet it remains poorly understood from both a fundamental and a practical perspective. Realistic sprays have a liquid breakup region, a dispersed multiphase flow, turbulent mixing processes, and various levels of flame interactions through the spray. Idealization of spray configurations in a quiescent environment (the starting point for models) has been impossible in 1 g due to the settling of large droplets and...

  19. Numerical simulation of the unsteady and turbulent flow in a high-pressure turbine stage; Simulation numerique de l'ecoulement instationnaire et turbulent dans un etage de turbine haute pression

    Energy Technology Data Exchange (ETDEWEB)

    Bastin, G.

    2004-09-15

    The aim of this study concerns the use of numerical methods for the resolution of the Reynolds Averaged Navier Stokes equations adapted to the simulation of the cooling of the trailing edge of a stator in a high pressure turbine. These methods, based on the elsA solver developed at ONERA, use a four steps Runge Kutta time discretization scheme and a Jameson centered space discretization scheme. The scheme is applied through a finite volume approach on control volume centered on the cells of a multi-block structured mesh. Turbulence is simulated either through the algebraic Michel model, or through the one-transport-equation Spalart-Allmaras model, or through the two-transport-equations k 1, k {omega} and k {epsilon} models, and through ASM model. A simulation of the flow in a bidimensional stator, without cooling, is carried out. The cooling, which is realized with trailing edge slots, is then simulated on a bidimensional stator. Because the slot is represented by meshes overlapping the mesh of the smooth blade, the Chimera method is chosen. This method makes it possible computations with overlapping meshes. The comparison with the experimental data, on these two first computations has validated this strategy to represent such slots. The tridimensional simulation of a single stator with taking account of the cooling is then realized. It showed the complex and tridimensional aspects of the main flow with focus on the influence of the cooling system. Finally two steady computations, without and with cooling, and an unsteady computation without cooling are carried out on a high pressure turbine stage. The comparison with the experimental data obtained in the frame of the European Brite-Euram program is made. These results make it possible to determine the effect of the cooling on the flow in a turbine stage. (authors)

  20. Mascotte, a research test facility for high pressure combustion of cryogenic propellants; Mascotte, un banc d'essai de recherche pour la combustion a haute pression d'ergols cryogeniques

    Energy Technology Data Exchange (ETDEWEB)

    Vingert, L.; Habiballah, M.; Traineau, J.C. [Office National d' Etudes et de Recherches Aerospatiales (ONERA), 92 - Chatillon (France)

    2000-07-01

    Detailed experimental studies of cryogenic propellant combustion are needed to improve design and optimization of high performance liquid rocket engines. A research test facility called Mascotte has been built up by ONERA to study elementary processes that are involved in the combustion of liquid oxygen and gaseous hydrogen. Mascotte is aimed at feeding a single element combustor with actual propellants, and the third version in operation since mid 1998 allows to reach supercritical pressures in the combustor. A specific high pressure combustor was developed for this purpose. Research teams from different laboratories belonging to CNRS and ONERA, regrouped in a common research program managed by CNES and SNECMA division SEP, may run experiments on Mascotte, with several objectives: - improve the knowledge and the modeling of physical phenomena; - provide experimental results for computer code validation; - improve and assess diagnostic techniques (especially optical diagnostics). Following diagnostics for instance, were used on Mascotte from 1994 to 1999: - OH imaging (spontaneous emission and laser induced fluorescence ); - CARS temperature measurements (using the H{sub 2} and simultaneously the H{sub 2}O molecules); - High speed cinematography (with a copper vapor laser synchronized to a high speed camera); - O{sub 2} vapor imaging (laser induced fluorescence); - Particle sizing (by means of a Phase Doppler Particle Analyzer). (authors)

  1. Géopolitique du district spécial de Bogotá et du Haut-Sumapaz (1900-1990

    Directory of Open Access Journals (Sweden)

    1992-01-01

    Full Text Available Le «District Spécial» de Bogotá est doublement singulier: par son statut administratif, promulgué sous État de Siège en 1954, qui en fait une entité territoriale à part, à mi-chemin entre la commune et le département, et par l’immense zone rurale qu’il inclue au sud de la ville, le Haut-Sumapaz, une région difficile d’accès, très peu peuplée et totalement sous-intégrée à la capitale colombienne. L’annexion du Haut-Sumapaz au District de Bogotá répond à des impératifs militaires, liés au particularisme géopolitique de la région. Ce no man’s land a constitué à plusieurs reprises au XXème siècle une sorte de ligne de front entre les «subversions» successives (guérilla libérale, mouvements agrariens, puis guérilla communiste et l’État central, à Bogotá. GEOPOLÍTICA DEL DISTRITO ESPECIAL DE BOGOTÁ Y DEL ALTO SUMAPAZ (1900-1990. El «Distrito Especial» de Bogotá es singular desde dos puntos de vista: por su estatuto administrativo, promulgado bajo Estado de Sitio en 1954, que lo convirtió en una entidad territorial entre el Municipio y el Departamento y por la inmensa zona rural que incluye al sur de la ciudad, el Alto Sumapaz, una región de difícil acceso, muy poco poblada y completamente subintegrada a la capital colombiana. La anexión del Alto Sumapaz al Distrito Especial de Bogotá responde a unos imperativos militares, que tienen que ver con el particularismo geopolítico de la región. Este no man’s land constituyó en varias ocasiones en el siglo XX una especie de línea de frente entre las distintas «subversiones» sucesivas (guerrilla liberal, movimientos agrarios, y después guerrilla comunista y el Estado Central, en Bogotá. GEOPOLITICS OF THE SPECIAL DISTRICT OF BOGOTÁ AND ALTO SUMAPAZ (1900-1990. Bogotá, as a Special District, has a twofold singularity. On the one hand, it became an independent administrative entity, intermediate between a Municipality and a State, after the State of

  2. Visit of the President of the Conseil Général of Haute-Savoie

    CERN Document Server

    CERN Bulletin

    2012-01-01

    On 23 October 2012, Christian Monteil, President of the Conseil Général of Haute-Savoie, visited CERN accompanied by a delegation of Departmental representatives and members of the Departmental services.   Christian Monteil, signing the official guest book. From left to right: Philippe Bloch (CERN), Frederick Bordry (CERN), Felicitas Pauss (CERN), Rolf Heuer (CERN Director-General), François Excoffier (Conseil Général, President of the Economy, Research and Higher Learning Commission), Christian Heison (Vice-President of the General Council, delegate for the economy and research – Department of Haute-Savoie representative to CERN) and Jean-Louis Mivel (Conseil Général, member of the Economy, Research and Higher Learning Commission). The Department of Haute-Savoie has been cooperating with CERN in the field of technology and knowledge transfer since 1996 in the form of finan...

  3. À la recherche du 1 % : que nous apprennent les travaux d’Atkinson, Piketty et Saez sur la concentration des hauts revenus ?

    Directory of Open Access Journals (Sweden)

    Nicolas Zorn

    2012-05-01

    Full Text Available Les inégalités de revenu se font croissantes dans la plupart des pays avancés et la richesse se concentre davantage au sommet de la pyramide sociale. Les deux principaux courants de pensée, l’école institutionnaliste et l’école du marché, peinent à expliquer pourquoi la hausse des inégalités de revenus se concentre principalement dans le centile le plus fortuné. Partant de ce constat, un nouveau courant de pensée s’est plutôt concentré, à l’instigation entre autres d’Atkinson, Piketty et Saez, sur les statistiques fiscales des très hauts revenus, fortement sous-estimés dans les enquêtes par sondage. Cet article présente une synthèse critique de leurs hypothèses, de leur méthodologie et de leurs résultats.Income inequalities are increasing in most advanced countries and most of the wealth has become concentrated at the top of the social pyramid. Institutionalist and market-based theories, the two main schools of thought on the subject, struggle to explain why the rise in income inequality is mainly concentrated in the most fortunate percentile. Based on this observation, Atkinson, Piketty and Saez have opened a new field of study specifically on top incomes (severely underestimated in surveys, based on tax statistics. This article presents a critical overview of their assumptions, their methodology and results.

  4. B-Zell-Lymphome der Haut - Pathogenese, Diagnostik und Therapie.

    Science.gov (United States)

    Nicolay, Jan P; Wobser, Marion

    2016-12-01

    Primär kutane B-Zell-Lymphome (PCBCL) beschreiben reifzellige lymphoproliferative Erkrankungen der B-Zell-Reihe, die primär die Haut betreffen. Die Biologie und der klinische Verlauf der einzelnen PCBCL-Subtypen variieren untereinander stark und unterscheiden sich grundsätzlich von primär nodalen und systemischen B-Zell-Lymphomen. Primär kutane Marginalzonenlymphome (PCMZL) und primäre kutane follikuläre Keimzentrumslymphome (PCFCL) werden auf Grund ihres unkomplizierten Verlaufs und ihrer exzellenten Prognose zu den indolenten PCBCL gezählt. Demgegenüber stellen die diffus großzelligen B-Zell-Lymphome, hauptsächlich vom Beintyp (DLBCL, LT) die aggressiveren PCBCL-Varianten mit schlechterer Prognose dar. Für die Ausbreitungsdiagnostik und die Therapieentscheidung sind eine genaue histologische und immunhistochemische Klassifizierung sowie der Ausschluss einer systemischen Beteiligung in Abgrenzung zu nodalen oder systemischen Lymphomen notwendig. Die Diagnostik sollte dabei durch molekularbiologische Untersuchungen unterstützt werden. Therapeutisch stehen für die indolenten PCBCL primär operative und radioonkologische Maßnahmen im Vordergrund sowie eine Systemtherapie mit dem CD20-Antikörper Rituximab bei disseminiertem Befall. Die aggressiveren Varianten sollten in erster Linie mit Kombinationen aus Rituximab und Polychemotherapieschemata wie z. B. dem CHOP-Schema oder Modifikationen davon behandelt werden. Auf Grund der in allen seinen Einzelheiten noch nicht vollständig verstandenen Pathogenese und Biologie sowie des begrenzten Therapiespektrums der PCBCL besteht hier, speziell beim DLBCL, LT, noch erheblicher Forschungsbedarf. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  5. Development of Pangasius steaks by improved sous-vide technology and its process optimization.

    Science.gov (United States)

    Kumari, Namita; Singh, Chongtham Baru; Kumar, Raushan; Martin Xavier, K A; Lekshmi, Manjusha; Venkateshwarlu, Gudipati; Balange, Amjad K

    2016-11-01

    The present study embarked on the objective of optimizing improved sous - vide processing condition for development of ready-to-cook Pangasius steaks with extended shelf-life using response surface methodology. For the development of improved sous - vide cooked product, Pangasius steaks were treated with additional hurdles in various combinations for optimization. Based on the study, suitable combination of chitosan and spices was selected which enhanced antimicrobial and oxidative stability of the product. The Box-Behnken experimental design with 15 trials per model was adopted for designing the experiment to know the effect of independent variables, namely chitosan concentration (X 1 ), cooking time (X 2 ) and cooking temperature (X 3 ) on dependent variable i.e. TBARS value (Y 1 ). From RSM generated model, the optimum condition for sous - vide processing of Pangasius steaks were 1.08% chitosan concentration, 70.93 °C of cooking temperature and 16.48 min for cooking time and predicted minimum value of multiple response optimal condition was Y = 0.855 mg MDA/Kg of fish. The high correlation coefficient (R 2  = 0.975) between the model and the experimental data showed that the model was able to efficiently predict processing condition for development of sous - vide processed Pangasius steaks. This research may help the processing industries and Pangasius fish farmer as it provides an alternative low cost technology for the proper utilization of Pangasius .

  6. L'assèchement des dépressions dunaires du littoral du Cotentin : mécanismes et propositions de gestion

    Directory of Open Access Journals (Sweden)

    Yves Petit-Berghem

    2008-06-01

    Full Text Available Les dunes de Basse-Normandie sont caractérisées par des dépressions humides de dimensions variables. Ces dépressions recèlent des habitats et une flore riches, ce qui leur confère un grand intérêt patrimonial. Mais ces milieux connaissent depuis quelques années une dynamique forte d'embroussaillement. Cette dernière, directement liée à un assèchement, préoccupe les gestionnaires. L'analyse des processus d'assèchement des dépressions humides met en avant la combinaison des paramètres en cause (conditions hydropédologiques, actions anthropiques et permet donc d'optimiser la gestion patrimoniale de ces sites.The dunes of Lower Normandy are characterized by moist depressions of various sizes. The depressions harbour a rich fauna and habitats, which are therefore of great patrimonial interest. But this environment has for some years witnessed an overgrowth of brushwood. This last one, directly connected to a drying out, worries the managers. The analysis of processes of drying out of dune slacks shows the combination of parameters involved (moisture conditions in the soil, human actions, and thus allows to optimise the patrimonial management of these sites.

  7. Bilan des introductions de salmonidés dans les lacs et ruisseaux d'altitude des Hautes-Pyrénées

    Directory of Open Access Journals (Sweden)

    DELACOSTE M.

    1997-01-01

    Full Text Available Les introductions de Salmonidés ont été importantes au cours des 60 dernières années dans les lacs et ruisseaux d'altitude des Hautes-Pyrénées. Six espèces de Salmonidés ont été introduites dans des milieux qui, pour la plupart, étaient vierges de populations piscicoles : la truite commune (Salmo trutta L., la truite arc-en-ciel (Oncorhynchus mykiss Walbaum, l'omble de fontaine (Salvelinus fontinalis Mitchill, l'omble chevalier (Salvelinus alpinus L., le cristivomer (Salvelinus namaycush Walbaum et le splake (Salvelinus fontinalis x Salvelinus namaycush. Dans de très nombreux cas, ces introductions ont abouti à des acclimatations. En revanche, les naturalisations sont beaucoup plus rares. Seules les espèces lacustres (cristivomer et omble chevalier se sont naturalisées dans la majorité des lacs où elles ont été introduites. Les conditions de reproduction constituent le facteur clé permettant d'expliquer la naturalisation des espèces. En ruisseau, il faut y ajouter la compétition avec l'espèce indigène (la truite commune, la pression halieutique ainsi que les conditions hivernales très rigoureuses. Les incidences écologiques des introductions sur les populations de truites communes indigènes sont faibles. En revanche, elles ne sont pas négligeables pour les populations de batraciens. Cette politique d'introduction a largement participé au développement de l'halieutisme dans ces milieux d'altitude. En cela, les introductions ont parfaitement répondu aux objectifs halieutiques qu'on leur avait fixés. L'acquisition de connaissances sur l'ensemble de la chaîne pyrénéenne constitue aujourd'hui une étape incontournable pour une politique de gestion globale des introductions.

  8. Metallurgical and mechanical parameters controlling alloy 718 stress corrosion cracking resistance in PWR primary water; Facteurs metallurgiques et mecaniques controlant l'amorcage de defauts de corrosion sous contrainte dans l'alliage 718 en milieu primaire des reacteurs a eau sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Deleume, J

    2007-11-15

    Improving the performance and reliability of the fuel assemblies of the pressurized water reactors requires having a perfect knowledge of the operating margins of both the components and the materials. The choice of alloy 718 as reference material for this study is justified by the industrial will to identify the first order parameters controlling the excellent resistance of this alloy to Stress Corrosion Cracking (SCC). For this purpose, a specific slow strain rate (SSR) crack initiation test using tensile specimen with a V-shaped hump in the middle of the gauge length was developed and modeled. The selectivity of such SSR tests in simulated PWR primary water at 350 C was clearly established by characterizing the SCC resistance of nine alloy 718 thin strip heats. Regardless of their origin and in spite of a similar thermo-mechanical history, they did not exhibit the same susceptibility to SCC crack initiation. All the characterized alloy 718 heats develop oxide scale of similar nature for various exposure times to PWR primary medium in the temperature range [320 C - 360 C]. {delta} phase precipitation has no impact on alloy 718 SCC initiation behavior when exposed to PWR primary water, contrary to interstitial contents and the triggering of plastic instabilities (PLC phenomenon). (author)

  9. English Department Reforms at the Hautes Etudes Commerciales: Entering the Nineties.

    Science.gov (United States)

    Shanahan, Daniel

    1993-01-01

    Discusses the reforms made in the fall of 1990 in the English department at the Ecole Hautes Etudes Commerciales (Paris, France), which were based on the basis of a combination of literature-culture and second- and foreign-language acquisition pedagogical biases. (four references) (VWL)

  10. Étude floristique et ethnobotanique de la flore médicinale du Haut ...

    African Journals Online (AJOL)

    Objective: This study is considered as a contribution to the study of medicinal plants that are used in traditional herbal medicne by the local population of the Haute Moulouya. Methods and results: Using 320 questionnaires, a series of ethnobotanical surveys was conducted in the field during the years of 2012 and 2013.

  11. Planificateur des activités de la haute direction | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Il incombe à la planificatrice des activités de la haute direction et du conseil de veiller ... et du CHD aux fins de discussion et de recommandations auprès de la secrétaire et ... Concevoir et tenir à jour un système de suivi fiable sur les sujets de ...

  12. L’élevage pastoral au Sénégal entre pression spatiale et mutation commerciale

    Directory of Open Access Journals (Sweden)

    Géraud Magrin

    2011-12-01

    Full Text Available L'élevage pastoral est menacé au Sénégal car les dynamiques écologiques, les défrichements et les politiques publiques compromettent l'accès aux ressources sur lequel repose sa mobilité essentielle. Loin des clichés qui le présentent comme une activité homogène et archaïque, l'élevage connaît pourtant des mutations importantes. Sous des formes variées, il se diversifie et se connecte aux marchés urbains nationaux du lait et de la viande, valorisant des marchés de niche. Les dynamiques observées dans le plus urbanisé des États du Sahel préfigurent ainsi celles qui s'amorcent ailleurs.

  13. Une localisation exceptionnelle de la tuberculose vertébrale Mal de Pott sous-occipital

    Science.gov (United States)

    Yahyaoui, Sana; Majdoub, Senda; Zaghouani, Houneida; Fradj, Hosni Ben; Bakir, Dejla; Bouajina, Elyes; Kraiem, Chakib

    2013-01-01

    Le mal de Pott est la forme la plus commune de la tuberculose osseuse touchant essentiellement le rachis dorso-lombaire. La localisation sous-occipitale reste exceptionnelle. Le diagnostic de cette entité est le plus souvent tardif ce qui expose à des complications graves. Les radiographies standard ne sont parlantes qu’à un stade tardif de la maladie, d'où l'intérêt de l'imagerie moderne notamment la tomodensitométrie (TDM) et l'imagerie par résonance magnétique (IRM) qui permettent un diagnostic précoce. Nous rapportons un nouveau cas de tuberculose sous-occipitale. Le diagnostic était posé sur l'imagerie en coupe et confirmé histologiquement à la biopsie transorale. Sont rappelés les aspects en imagerie de cette localisation particulière du mal de Pott. PMID:23819005

  14. Spécificités du sous-titrage pour enfants malentendants

    OpenAIRE

    Comitre-Narvaez, Isabel

    2016-01-01

    Ce travail aborde la spécificité multisémiotique du texte audiovisuel qui est à l’origine de nombreux défis que le traducteur audiovisuel doit relever. Il explore les rapports intersémiotiques qui s’établissent entre le code verbal et le code visuel et se concentre sur les particularités du sous-titrage pour sourds et malentendants dans la “compensation” du déficit auditif, essentiellement son rapport spécifique à l’image. À cet égard, Gottlieb signale que le succès du sous-titrage dépend du ...

  15. Profil lipidique des personnes vivant avec le VIH sous antirétroviral ...

    African Journals Online (AJOL)

    Au regard des connaissances actuelles, aucune étude n'est disponible au Bénin sur le profil lipidique des personnes vivant avec le VIH. L'objectif de la présente étude est de décrire le profil lipidique des personnes vivant avec le VIH sous antirétroviral suivies au CHU-O/P de Porto-Novo. Il s'est agi d'une étude ...

  16. statut de la matiere organique des cambisols et des lixisols sous

    African Journals Online (AJOL)

    Administrateur

    L'étude vise à évaluer la matière organique des Cambisols et des Lixisols sous formations naturelles de longue durée en zone climatique nord-soudanienne et à établir, les relations entre ... sont supérieures à celles des sols des zones sahélienne et sud-soudanienne. ... globale a eu une corrélation positive avec le pH.

  17. Tempêtes sanglantes sur les hautes terres tibétaines

    OpenAIRE

    Jie, Yu

    2011-01-01

    Woeser (Wei Se), Sha jie. Sishi nian de jiyi jinqu. Jingtou xia de Xizang wenhua. Di yi ci gongkai. (Massacres et pillages. Mémoire interdite depuis 40 ans. La culture tibétaine sous un objectif pour la première fois) Forbidden memory. Tibet during the Cultural Revolution, Taipei, Dakuai wenhua, 2006, 296 p.

  18. Volatile compound profile of sous-vide cooked lamb loins at different temperature-time combinations.

    Science.gov (United States)

    Roldán, Mar; Ruiz, Jorge; Del Pulgar, José Sánchez; Pérez-Palacios, Trinidad; Antequera, Teresa

    2015-02-01

    Lamb loins were subjected to sous-vide cooking at different combinations of temperature (60 and 80°C) and time (6 and 24h) to assess the effect on the volatile compound profile. Major chemical families in cooked samples were aliphatic hydrocarbons and aldehydes. The volatile compound profile in sous-vide cooked lamb loin was affected by the cooking temperature and time. Volatile compounds arising from lipid oxidation presented a high abundance in samples cooked at low or moderate cooking conditions (60°C for 6 and 24h, 80°C for 6h), while a more intense time and temperature combination (80°C for 24h) resulted on a higher concentration of volatile compounds arising from Strecker degradations of amino acids, as 2-methylpropanal and 3-methylbutanal. Therefore, sous-vide cooking at moderately high temperatures for long times would result in the formation of a stronger meaty flavor and roast notes in lamb meat. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. Hot pressing of U-UC cermets and stoichiometric uranium monocarbide; Preparation par frittage sous charge de cermets U-UC et de monocarbure stoechiometrique

    Energy Technology Data Exchange (ETDEWEB)

    Dubuisson, J; Houyvet, A; Le Boulbin, E; Lucas, R; Moranville, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    High density fuels, either in uranium monocarbide or in U-UC cermets have been prepared on laboratory-scale, by hot pressing of mixtures of uranium powder and graphite in suitable proportions. Uranium powder is prepared by calcium reduction of UO{sub 2} followed by an acetic leaching at low temperature. An adequate protection-treatment permits the manipulation of the powder in the open air. Uranium and Graphite powders are intimately mixed and then hot pressed in a double effect graphite die at a temperature of 900-1000 deg. C under a charge of 200 kg/cm{sup 2} during 3 hours. A special design of the die avoids the breaking of the graphite during the sintering. In this way, samples are prepared, the characteristics of which are: 1) {+-} 5 pour cent of homogeneity for a ratio height/diameter = 2. 2) almost theoretical density (98 pour cent) 3) low concentration of unreacted carbon (heat treatment of stoichiometric monocarbide can be useful for completion of reaction) 4) the micrographic examination shows: - a network of monocarbide surrounding uranium in the case of low concentration cermets (<2,5 per cent C) - two networks intimately mixed for high concentration cermets (<2,5 per cent C) - a fine grain structure for the monocarbide (10 u). 5) In every case, the X rays examinations show a fine grain structure without any orientation, and no UC{sub 2}. Some indications are given on the physical (thermal cycling, conductibility) and chemical properties (corrosion, reaction with cladding materials). (author)Fren. [French] Une methode de preparation de combustibles de haute densite, soit en monocarbure d'uranium, soit en cermets U-UC, a ete mise au point au laboratoire. Il s'agit du frittage sous charge de melanges de poudres d'uranium et de graphite en proportion convenable. La poudre d'uranium est elaboree par calciothermie de l'oxyde UO{sub 2} suivie d'un lavage acetique a basse temperature. Un traitement de protection adequat pe sa manipulation a l'air. Les poudres

  20. Intergranular Pressure Solution in Nacl: Grain-To-Grain Contact Experiments under the Optical Microscope Dissolution sous contrainte dans NaCl : expériences de contact grain à grain sous microscope optique

    Directory of Open Access Journals (Sweden)

    Spiers C. J.

    2006-12-01

    effective diffusivity varying with contact force and on-going convergence. The results agree broadly with those of previous compaction creep experiments performed using wet halite powder. Discrepancies with other workers results for single-contact dissolution experiments can be explained in terms of differences in experimental configuration and competition between driving forces. La dissolution sous contrainte (IPS - Intergranular Pressure Solution représente un mécanisme de lithification, de compaction et de déformation à l'échelle géologique pour une large gamme de roches. Les études expérimentales d'IPS réalisées sur des agrégats de quartz n'ont pas été couronnées de succès en raison d'un taux faible d'IPS, et les expériences IPS réalisées en utilisant une halite saturée comme analogue de roche (Spiers et Schutjens, 1990 ; Hickman et Evans, 1991 ont laissé des incertitudes quant au détail des mécanismes IPS et à la structure/saturation au contact du grain dans ce matériau. La présente étude fait état de quatre expériences de dissolution de contact réalisées sous microscope optique afin d'étudier le mécanisme et la cinétique de l'IPS pour des contacts simples halite/halite et halite/verre, chargés en eau salée (température ambiante. Des forces normales de contact dans la gamme de 1,0 à 2,6 N ont été appliquées en présence d'eau salée saturée en NaCl, induisant des pressions de 0,8 à 7,4 MPa. Des pertes de masse et des convergences - fonction du temps - ont été observées pour tous les contacts. Dans tous les cas, le fait de charger le contact (ou d'augmenter la charge sur le contact a conduit à la formation immédiate d'une morphologie de contact rugueuse, composée d'un motif d'îles et de canaux, contrôlé par des caractéristiques cristallographiques, à l'échelle de quelques microns. Cette microstructure non équilibrée a évolué dans le temps vers une face de contact optiquement plate. Le processus de convergence

  1. Accroissement de la sécurité alimentaire dans les hautes terres de l ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    L'Éthiopie est aux prises avec un grave problème d'insécurité alimentaire, exacerbé par une pression démographique croissante, la dégradation des sols et les périodes de sécheresse fréquentes. Les légumineuses telles que le pois chiche, la lentille, la féverole et le niébé sont importantes pour les petits exploitants ...

  2. The Emergence, Development and Influence of French Haute Cuisine on Public Dining in Dublin Restaurants 1900-2000: an Oral History

    OpenAIRE

    Mac Con Iomaire, Máirtín

    2009-01-01

    The words Dublin or Ireland do not immediately come to mind when haute cuisine is mentioned. However, two leading French chefs, the brothers Francois and Michel Jammet, opened a restaurant in Dublin in 1901 which, up until its closure in 1967, remained one of the best restaurants serving haute cuisine in the world (Mac Con Iomaire 2005a; Mac Con Iomaire 2006). Haute cuisine was served in many Dublin hotels, clubs and restaurants during the twentieth century and came under similar influences a...

  3. A semi-automatic device for measuring osmotic pressures (1962); Un dispositif semi-automatique pour la mesure des pressions osmotiques (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Lucarain, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    A cryoscopic apparatus for measuring osmotic pressure in small samples (0.1 ml) is described. The sample is frozen by air cooled dry ice or liquid nitrogen; the temperature is measured by a thermistor resistance and a recording millivoltmeter. (author) [French] Un appareil cryometrique pour la mesure des pressions osmotiques sur des petits echantillons (0,1 ml) est decrit. L'echantillon est congele par une circulation d'air refroidi par de la carboglace ou de l'azote liquide; sa temperature est mesuree par une thermitance associee a un millivoltmetre enregistreur. (auteur)

  4. Hauts-de-France. A pioneer in the French energy transition

    International Nuclear Information System (INIS)

    Falk, Thomas

    2016-01-01

    France had established in advance of last year's climate summit in Paris on ambitious energy policy goals. Especially the 2016 newly formed Region Hauts-de-France stands out as a pioneer here. There one drives innovation and investments with the objective of fulfilling by 2050 their own needs completely by renewable sources. The orientation to supplies Jeremy Rifkin idea of the third industrial revolution. If successful, the region would be on climate protection well ahead of the national targets, the 2050 ''only'' provide a CO 2 emission reduction of 75%. In addition to the Research and development (R and D) to many future ideas in Hauts-de-France but also some major projects for Security of European energy supplies are realized that show the local agility. [de

  5. Microbiological and other characteristics of chicken breast meat following electron-beam and sous-vide treatments

    International Nuclear Information System (INIS)

    Shamsuzzaman, K.; Chuaqui-Offermanns, N.; Lucht, L.; McDougall, T.; Borsa, J.

    1992-01-01

    The combined effects of radiation and sous-vide treatment of chicken breast meat were investigated with respect to survival and growth of Listeria monocytogenes, shelf life, thiamine content, and sensory qualities. Chicken breasts were inoculated with L. monocytogenes 81-861 (10(5) CFU/G), vacuum-packed, irradiated with electron beam (EB) up to 2.9 kGy, and cooked to an internal temperature of 65.6 degrees C. Sous-vide treatment alone had marginal lethal effect on the L. monocytogenes; the residual inoculum reached 10(7) CFU/g after 8 weeks at 2 degrees C. However, after the combined treatments of sous-vide and EB at 2.9 kGy, the organism remained undetectable during the 8-week storage period. Parallel studies on uninoculated breast meat revealed that sous-vide samples had a shelf life of less than 6 weeks without EB treatment, whereas samples that were irradiated and then received sous-vide treatment had a shelf life of at least 8 weeks. There was a slight reduction in thiamine levels as a result of the EB treatment, but there was essentially no additional loss of thiamine due to the subsequent sous-vide treatment and storage at 2 degrees C. Electron-beam treatment had very little effect on the odor and flavor of the reheated samples. It was concluded that EB treatment combined with, sous-vide treatment can greatly enhance the microbial safety and shelf life of chicken breast meat

  6. La sous-traitance au Brésil : un phénomène à la fois ancien et nouveau Subcontracting in Brazil: a phenomenon both new and old La subcontratación en Brasil : un fenómeno antiguo y nuevo a la vez

    Directory of Open Access Journals (Sweden)

    Graça Druck

    2009-05-01

    Full Text Available L’objectif de l’article est de discuter la sous-traitance aujourd’hui au Brésil. Nous discutons dans l’article le processus de flexibilisation et de précarisation du travail au Brésil, en prenant comme objet d’étude la sous-traitance, en tant qu’une des principales politiques de gestion et d’organisation du travail dans le cadre de la restructuration productive. Nous présentons une synthèse du processus de sous-traitance observé ces dernières années dans le pays, sous ses anciennes et nouvelles modalités, et nous analysons les résultats empiriques récents sur la sous-traitance dans des entreprises industrielles à haut risque pour l’environnement et la santé des travailleurs, dans la Région Métropolitaine de Salvador/Bahia/Brésil, de même que nous indiquons les principales de formes de résistance et de contre-pouvoirs construits contre la précarisation du travail et la sous-traitance.The purpose of the article is to discuss current subcontracting in Brazil. Our study subject « subcontracting as one of the main work management and organization policies in the framework of productive restructurings » used to discuss the work flexilibization and precarization process in Brazil. We present a synthesis of the subcontracting process observed in recent years in this country, under its old and new conditions, and we analyze the recent empirical results on subcontracting in industrial enterprises at high risk to the environment and workers’ health, in the metropolitan region of Salvador/Bahia, Brazil. We also identify the main forms of resistance and the counterbalances developed against work precarization and subcontracting.El objetivo de este artículo es discutir la tercerización en el Brasil contemporáneo. Se discute el proceso de flexibilización y de precarización del trabajo en Brasil, tomando como objeto de estudio la subcontratación como una de las principales políticas de gestión y de organizaci

  7. Établissement d'une gouvernance efficace de l'eau dans les hautes ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce projet vise à faciliter une gestion efficace des ressources hydriques dans les hautes terres d'Asie en intégrant les analyses d'impact des changements climatiques à l'évaluation de la vulnérabilité, des moyens de subsistance et des politiques sur l'eau. Les chercheurs du Kunming Institute of Botany en Chine élaboreront ...

  8. Établissement d'une gouvernance efficace de l'eau dans les hautes ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    La plupart des grandes rivières d'Asie, qui alimentent près de trois milliards de personnes en aval, prennent leur source dans les hautes terres d'Asie, y compris l'Himalaya et le plateau tibétain. Selon les prévisions, le réchauffement planétaire et les changements climatiques qui y sont associés influeront sur le débit des ...

  9. Odraz haute couture v českých zemích

    OpenAIRE

    Hoffmannová, Soňa

    2014-01-01

    "Reflection of Haute Couture in The Czech lands" deals with fashion in the second half of the 19th century and early 20th century in the Czech lands. Before confirmation of national independence in the form of Czechoslovak republic the Czech fashion was evolving between two opposing tendencies. First, there was acceptance of influence from abroad, especially from France, England and Germany particularly through fashion magazines, and second, there was an effort to preserve national originalit...

  10. Partenariat de recherche en Hautes écoles spécialisées Santé Travail social de Suisse occidentale

    Directory of Open Access Journals (Sweden)

    Kim Stroumza

    2011-10-01

    Full Text Available Au cœur des nouvelles politiques de la recherche tournée vers l’innovation, les Hautes écoles spécialisées suisses, récemment portées au niveau universitaire, ont pour mandat la recherche appliquée et le développement. Si la valorisation scientifique des travaux réalisés sous ce régime est visible dans les supports habituels, il n’en va pas de même de l’activité partenariale elle-même et des processus qui participent à sa constitution. L’analyse des narrations des protagonistes des partenariats permet de mettre en visibilité les phénomènes qui font la spécificité de cette activité, que les modèles de la diffusion sont impuissants à saisir. Prise entre pratique ordinaire, activité professionnelle et activité scientifique, soumise à la temporalité du processus, l’activité partenariale interroge la conception même du savoir qui sous-tend les modèles de recherche appliquée.Research partnership in the Swiss Universities of applied sciencesAt the heart of the new research policies tending towards innovation, the Swiss Universities of applied sciences, recently promoted to tertiary academic rank, have been given, as primary mission, to extend their activities in Applied Research and Development. If scientific valorization of this kind of research is visible in current media and publications, it is not so apparent for the partnership itself or the processes which constituted its development in the first place. The analysis of the narrations of the protagonists of the partnership shows the phenomenon which illustrates the specificity of this activity, that valorization models are unable to grasp. Caught between regular practice, professional and scientific activities, subject also to the temporality of the process, partnership activities question the very concept of the knowledge which underlines the models of applied research.Investigaciones conjuntas en Escuelas Superiores de Sanidad y Trabajo Social en Suiza

  11. Thermograms of the combined High Hydrostatic Pressure and Sous-vide treated Longissimus dorsi of pork

    Science.gov (United States)

    Kenesei, Gy; Jónás, G.; Salamon, B.; Dalmadi, I.

    2017-10-01

    In this work, slices of Longissimus dorsi of pork was used as raw material to establish the effects of the sous-vide technology and the high hydrostatic pressure treatments (and their combinations) on meat. The state of the proteins in meat has a very important effect on several quality parameters of the product, such as weight loss, water holding capacity, organoleptic properties. Therefore it is important to follow and analyse the denaturation of the protein content during food processing. The samples were cooked sous-vide (60 °C, 5-480 minutes) or pressurized (100-600 MPa, 5 minutes, room temperature). Also two steps treatments were studied combining both technologies, applying high hydrostatic pressure treatment (300 or 600 MPa, 5 minutes, room temperature) after or previous to sous-vide cooking (60 °C, 30 minutes). The changes in the condition of meat proteins were followed by a differential scanning calorimeter. The DSC curves were analysed using the unit’s own software where denaturation heat was determined. Thermograms show through the change of the sample’s protein state the dissimilar effect of the treatments. Using the Polar Qualification System -previously proved to be effective with NIR measurements- the spectral information was reduced to a two dimensional polar co-ordinate system where each DSC curve is represented by a “quality point”. As a new experiment the applied PQS data reduction method compared to the traditional thermal analysis data processing gave us less information on the differences of our samples although the results are promising as we were able to detect the same trends and characteristics.

  12. Les Gorges de Trévans dans le front subalpin – Un site exceptionnel des Alpes de Haute-Provence

    Directory of Open Access Journals (Sweden)

    Jean Nicod

    2011-10-01

    Full Text Available Les canyons de Trévans sont incisés dans des unités calcaires jurassiques, dans la zone frontale subalpine, proche du piémont de Valensole. Ces reliefs sont en rapport avec les phases néotectoniques. Ce secteur fait principalement partie de la forêt domaniale du Montdenier, avec des écosystèmes montagnards et supra-méditerranéens, bois de hêtres et de chênes pubescents, large extension des brousses et d'importants reboisements en pins noirs. Les hautes surfaces conservent des traces d'un ancien aplanissement et des sols résiduels paléokarstiques. Sur les pentes, sous des escarpements démembrés, les éboulis et convois de blocs témoignent des processus périglaciaires hérités et, localement, des évènements séismiques. De nombreux processus dynamiques s'observent dans les canyons : éboulements provenant des parois affectées des effets de détente, coups de gouge et marmites de géant dans leur fond excavé par les écoulements turbulents dans les cascades… et le Pont de Tuf.The canyon system of Trevans has cut the blocks of the jurassic limestones, in subalpine over thrust front, near the Valensole piedmont. These landforms are in relationship with the neotectonic movements. This area belongs to the State Forest of Montdenier, woodland of various mountain and supra-mediterranean ecosystems, with beeches and white oaks Quercus pubescens, large extent of bush and important reforestation in black pines (Pinus nigra. The high surfaces preserve some relics of the old planation and paleokarstic forms and residual soils. On the slopes, under the break-up escarpments, the screes and landslides give the part of the periglacial processes and, locally, of the seismic events. Numerous dynamic processes occur in the canyons: rock-slides, in relationship with open fractures, scallops and pot-holes in the bottom excavated by the turbulent flows in the waterfalls of the creeks and, only case, a travertine bridge.

  13. Long-time water level observations at the HDR-testsite Soultz-sous-Forets

    Energy Technology Data Exchange (ETDEWEB)

    Dornstaedter, J; Heinemann-Glutsch, B; Zaske, J [GTC-Kappelmeyer GmbH, Karlsruhe (Germany)

    1997-12-01

    Pressure or water level measurements have been performed by GTC in different wells at the geothermal testsite Soultz-sous-Forets for six years now. The water lever variations are mainly influenced by earth tides, barometric pressure variations, hydraulic testing and stimulation. The small scale variations are influenced by tidal and barometric forcing functions, the large scale variations by hydraulic testing and stimulation. By analyzing such measurements it is possible to get important information about the hydrualic connections between the boreholes, as well as aquifer parameters. (orig./AKF)

  14. Leuconostoc rapi sp. nov., isolated from sous-vide cooked rutabaga

    DEFF Research Database (Denmark)

    Lyhs, Ulrike; Snauwaert, I.; Pihlajaviita, S.

    2015-01-01

    A Gram-positive, ovoid lactic acid bacterium, strain LMG 27676T, was isolated from a spoiled sous-vide cooked rutabaga. 16S rRNA gene sequence analysis indicated that the novel strain belongs to the genus Leuconostoc, with Leuconostoc kimchi and Leuconostoc miyukkimchii as nearest neighbours (99.......1 and 98.8% 16S rRNA gene sequence similarity towards the type strain, respectively). Phylogenetic analysis of the 16S rRNA gene, multilocus sequence analysis of the pheS, rpoA and atpA genes, and biochemical and genotypic characteristics allowed to differentiate strain LMG 27676T from all established...

  15. Etude de la propagation sous critique dans les fibres de verre par relaxation de la charge

    OpenAIRE

    R'Mili , M.; Godin , N.; Lamon , J.

    2011-01-01

    International audience; Plusieurs fibres inorganiques de type verre ou céramique (à base de carbure de silicium) sont très sensibles à la propagation sous critique de fissures, activée chimiquement ou thermiquement. Dans ce cas la rupture survient d'une façon prématurée à un niveau de contrainte relativement bas comparé à la contrainte de rupture. Cet article propose une approche statistique de la rupture en fatigue statique fondée sur l'analyse de la rupture des fibres dans une mèche sollici...

  16. Changes provoked by boiling, steaming and sous-vide cooking in the lipid and volatile profile of European sea bass.

    Science.gov (United States)

    Nieva-Echevarría, Bárbara; Manzanos, María J; Goicoechea, Encarnación; Guillén, María D

    2017-09-01

    This study aims to shed light on the changes provoked by boiling, steaming and sous-vide cooking on the lipids and volatile profile of farmed and wild European sea bass meat. None of the cooking techniques provoked changes due to hydrolytic or oxidation processes detectable by 1 H NMR on sea bass lipids. The lipid profile of main and minor lipidic components was maintained after cooking. However, study by SPME-GC/MS evidenced that steaming and sous-vide cooking modified the volatile profile of sea bass meat, especially in farmed specimens. The compounds generated came from the occurrence, to a very small extent, of lipid and protein degradation. By contrast, boiling scarcely modified the initial characteristics of raw sea bass. Thus, from a sensory point of view and considering the odour-active compounds generated, steaming and sous-vide cooking provoked more noticeable changes than boiling, especially in farmed sea bass meat. Copyright © 2017. Published by Elsevier Ltd.

  17. Les effets potentiels du taping chez une population adulte souffrant d'un conflit sous-acromial

    OpenAIRE

    Roch, Sylvie; Thétaz, Alain; Balthazard, Pierre

    2012-01-01

    Introduction : Le conflit sous-acromial est une pathologie fréquente qui touche une grande partie de la population. Quelques revues de la littérature recommandent une prise en charge spécifique, mais peu d’études proposent le taping comme adjuvant aux traitements préconisés. Ainsi ce travail de bachelor a pour objectif de déterminer les effets potentiels du taping chez une population adulte souffrant de conflit sous-acromial. Méthodologie : Notre recherche d’études s’est effectuée de janvier ...

  18. The influence of pressure on diffusion leading to intermetallic compounds; Influence de la pression sur les diffusions donnant naissance a des composes intermetalliques

    Energy Technology Data Exchange (ETDEWEB)

    Adda, Y; Beyeler, M; Kirianenko, A; Pernot, B [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1961-07-01

    -ray diffraction study, mainly in the U-Cu system. Experiments in progress seem to show that deviation from stoichiometry cannot be observed in alloys prepared by the classical techniques of fusion. (author) [French] Il a ete montre par A.D. LE CLAIRE, J.L. ZAMBROW et L. CASTLEMAN, que l'application d'une pression uniaxiale parallele a la direction de diffusion peut modifier de facon appreciable la cinetique de croissance des phases intermediaires qui peuvent se former dans cette direction. L'interpretation de ce phenomene prete a discussion, et on essaie donc de l'expliquer par une analyse approfondie des donnees experimentales. Il ressort des etudes microscopiques de la cinetique de croissance des zones, particulierement pour les systemes uranium-cuivre et uranium-nickel, que cette croissance est affectee de maniere similaire par une pression uniaxiale ou par une pression hydrostatique. Par contre, la vitesse de croissance de ces zones augmente en fonction de la pression appliquee pour les systemes uranium-cuivre, uranium-nickel et uranium-aluminium (cet effet etant particulierement marque dans le cas d'uranium-aluminium). Afin de determiner avec precision les limites de la gamme de stabilite des composes intermetalliques, les courbes des caracteristiques de concentration et de penetration ont ete etablies au moyen du micro-analyseur electronique de CASTAING. Les resultats montrent que lorsqu'une diffusion a lieu sans pression exterieure (les couples U-Cu et U-Ni) ou avec une pression a 300 kg/cm{sup 2} (le couple U-Al), la concentration varie de facon notable dans les composes obtenus, ceux-ci etant theoriquement stoechiometriques. On retrouve, par exemple, en traversant la zone de diffusion d'un metal a l'autre, les variations continues suivantes: UCu{sub 4,70} a UCu{sub 5.25} dans le couple U-Cu; UNi{sub 4,75} a UNi{sub 5,25} dans le couple U-Ni; UAl{sub 2,2} a UAl{sub 3,3} dans le couple U-Al. Si l'on applique une pression uni-axiale ou hydrostatique de plus de 500 kg

  19. Vacuum brazing of metals (1961); Brassure sous vide des metaux (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Lapujoulade, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    We have studied brazing in vacuum aiming its application for the making of containers and apparatus meant for high vacuum (p < 10{sup -8} torr). We first define the wettability of a brazing alloy on a metal and we remind the influence of the various parameters which act on this wettability (nature of the solid, of the liquid, geometrical and physicochemical state of the surface, metallurgical reactions occurring at the interface, temperature, time). We give then the results of the tests carried out in order to determine the conditions of wettability in vacuum of some brazing alloys on metals which can be used for the above mentioned apparatus (stainless steel, aluminium, bronze, titanium, zirconium, kovar, nickel, copper). (author) [French] Nous avons etudie la brasure sous vide en vue de son application a la construction d'enceintes et apparelilage destines a l'obtention des vides eleves (p < 10{sup -8} torr). Nous definissons d'abord la mouillabilite d'une brasure sur un metal et nous rappelons l'influence des differents parametres qui agissent sur cette mouillabilite (nature du solide, du liquide, etat geometrique et physico-chimique de la surface, reactions metallurgiques a l'interface, temperature, temps). Nous donnons ensuite les resultats des essais effectues dans le but de determiner les conditions de mouillabilite sous vide de certaines brassures sur des metaux utilisables dans les constructions mentionnees ci-dessus (acier inoxydable, bronze d'aluminium, titane, zirconium, kovar, nickel, cuivre). (auteur)

  20. Les pressions écologiques réglementaires : comment les entreprises tunisiennes les gèrent-elles ?

    Directory of Open Access Journals (Sweden)

    Ahmed Turki

    2012-06-01

    Full Text Available Les entreprises sont de plus en plus appelées aujourd’hui à prendre en considération les aspects environnementaux dans leur gestion. Elles sont la cible des pressions environnementales dont la principale source est les pouvoirs publics. Ainsi, le présent papier se propose d’étudier la nature de la relation entre les entreprises et les pouvoirs publics en matière de protection de l’environnement. Afin d’atteindre cet objectif, une étude de cas est effectuée sur 8 entreprises tunisiennes dont deux sont certifiées par la norme ISO 14001. Les résultats montrent que toutes les entreprises ont fait l’objet d’inspections périodiques et de pénalités de la part des pouvoirs publics qui constituent la principale et parfois l’unique source de pression environnementale dans le contexte tunisien. Ces entreprises trouvent que les normes législatives environnementales sont difficiles à atteindre. Aussi, les résultats identifient deux types de relations entre les entreprises et les pouvoirs publics : coopérative et conflictuelle. De même, l’étude de cas montre que les pressions environnementales ont diminué suite aux actions environnementales effectuées mais demeurent toujours présentes.Companies are today more and more called to consider the ecological aspects in their management. They are the target of the ecological pressures the main source of which is public authorities. So, the present paper suggests studying the nature of the relation between companies and public authorities in environmental protection. To reach this objective, a case study is made on 8 Tunisian companies among which two are certified to the standard ISO 14001. The results show that public authorities (constitute the most and sometimes the only source of ecological pressure in the Tunisian context. These pressures show themselves by overhauls and penalties. These companies find that the environmental legislative standards are difficult to achieve

  1. Experimental characterization of the hydro-mechanical behaviour of Meuse/Haute-Marne argilites; Caracterisation experimentale du comportement hydromecanique des argilites de Meuse/Haute-Marne

    Energy Technology Data Exchange (ETDEWEB)

    Escoffier, S

    2002-04-01

    Within the framework of a feasibility study of underground radioactive waste repository the experimental characterization of the coupled behavior of the host layer is of first importance. This work concerns the experimental characterization in laboratory of the poro-elastic behavior of argillite which constitutes the host layer of the future underground laboratory of ANDRA located at the limit of the Meuse/Haute-Marne. The theoretical approach is the Mechanics of Porous Media defined by Coussy [1991] which has the advantage of providing a formulation of the behavior laws using measurable parameters in laboratory. The difficulties or the feasibility of the characterization tests of these rocks coupled behavior are related to their very low permeability which requires an adaptation of the experimental devices initially used on more permeable rocks. Initially a synthesis on the knowledge of the poro-elastic parameters of Meuse/Haute-Marne argillite is given. Thereafter a first approach of the use of the studies of sensitivity as tools of decision-making aid is proposed. The experimental difficulties encountered by the various experimenters are illustrated by the diversity of the experimental choices, the test duration or by the results disparity. Because of economic, political and ecological stake, the studies of sensitivity could make it possible to direct the experimental efforts by giving indications on the dominating parameters in the coupled behavior of a rock. In the second time after the presentation of the test results of physical characterization 3 types of tests are described: permeability test (pulse test), determination of Biot coefficient under odometric loading and isotropic drained test. The complexity of these tests is related to the attack of the experimental limits. They are presented in detail: theoretical recalls, experimental set up, experimental protocol, unfolding and test results. (author)

  2. Flood-inundation maps for the Wabash River at Terre Haute, Indiana

    Science.gov (United States)

    Lombard, Pamela J.

    2013-01-01

    Digital flood-inundation maps for a 6.3-mi reach of the Wabash River from 0.1 mi downstream of the Interstate 70 bridge to 1.1 miles upstream of the Route 63 bridge, Terre Haute, Indiana, were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent of flooding corresponding to select water levels (stages) at the USGS streamgage Wabash River at Terre Haute (station number 03341500). Current conditions at the USGS streamgage may be obtained on the Internet from the USGS National Water Information System (http://waterdata.usgs.gov/in/nwis/uv/?site_no=03341500&agency_cd=USGS&p"). In addition, the same data are provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system (http://water.weather.gov/ahps//). Within this system, the NWS forecasts flood hydrographs for the Wabash River at Terre Haute that may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated using the most current stage-discharge relation at the Wabash River at the Terre Haute streamgage. The hydraulic model was then used to compute 22 water-surface profiles for flood stages at 1-ft interval referenced to the streamgage datum and ranging from bank-full to approximately the highest recorded water level at the streamgage. The simulated water-surface profiles were then combined with a geographic information system digital elevation model (derived from Light Detection and Ranging (LiDAR) data having a 0.37-ft vertical accuracy and a 1.02-ft horizontal accuracy) to delineate the area flooded at each water

  3. Thermal and radiation induced polymerisation of carbon sub-oxide; Polymerisation thermique et sous rayonnement du sous-oxyde de carbone

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Michel

    1964-03-15

    This research thesis addresses the study of the polymerisation of carbon sub-oxide (C{sub 3}O{sub 2}) in gaseous phase. As this work is related to other researches dealing with the reactions of the graphite-CO{sub 2} system which occur in graphite-moderated nuclear reactors, a first intention was to study the behaviour of C{sub 3}O{sub 2} when submitted to radiations. Preliminary tests showed that the most remarkable result of this action was the formation of a polymer. It was also noticed that the polymerisation of this gas was spontaneous however slower at room temperature. The research thus focused on this polymerisation, and on the formula of the obtained polymer. After some generalities, the author reports the preparation, purification and storage and conservation of the carbon sub-oxide. The next parts report the kinetic study of thermal polymerisation, the study of polymerisation under γ rays, the study of the obtained polymer by using visible, UV and infrared spectroscopy, electronic paramagnetic resonance, and semi-conductivity measurements [French] Le but de ce travail est l'etude de la polymerisation du sous-oxyde de carbone, C{sub 3}O{sub 2}, en phase gazeuse. Ce travail est en relation avec d'autres recherches concernant les reactions du systeme graphite-CO{sub 2} qui se produisent dans les reacteurs nucleaires de la filiere moderee au graphite. Notre premiere intention etait donc d'etudier le comportement de C{sub 3}O{sub 2} sous l'action des rayonnements. Or des essais preliminaires nous ont rapidement montre que le resultat le plus marquant de cette action etait l'obtention d'un polymere. On a egalement remarque que ce gaz polymerisait spontanement - quoique moins rapidement - a la temperature ambiante. Notre etude s'est donc circonscrite a cette polymerisation, avec ou sans rayonnements, ainsi qu'a son aboutissement: le polymere, dont nous avons tente d'eclaircir la formule. Au terme de cette etude, bien que certains points ne soient pas encore

  4. Cartographie et contrôle au Maroc sous le Protectorat espagnol (1912-1956

    Directory of Open Access Journals (Sweden)

    José Luis Villanova

    2010-06-01

    Full Text Available La principale fonction des interventores (contrôleurs du Protectorat espagnol au Maroc entre 1912 et 1956 a consisté à surveiller l’action des autorités tribales marocaines pour asseoir la présence coloniale. Cependant, le Haut-Commissariat d’Espagne au Maroc leur a souvent demandé de préparer des rapports d’ordre économique, social ou à finalité militaire sur les tribus, généralement mal connues de l’autorité coloniale. Ces documents contiennent des cartes de qualité variée qui ont pu constituer un instrument précieux de contrôle et, dans certains cas, un outil de propagande au service de l’action coloniale espagnole.

  5. Britain`s privatisation programme between government and powerful pressure groups; La privatizzazione inglese tra gruppi di pressione e forze politiche

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, C [Institute of Economic Affairs, London (United Kingdom)

    1998-09-01

    There is an apparent paradox in Britain`s privatisation programme. It was carried out by an administration which proclaimed the virtues of market liberalisation, but its main feature was the ownership transfer, not liberalisation. The privatisation schemes, determined by the interplay between government and powerful pressure groups, are now leading to consequences in utility markets with some dangers of re-politicisation. [Italiano] Vi e` un evidente paradosso nella privatizzazione inglese: portata avanti da un`amministrazione che proclamava le virtu` del libero mercato, la sua principale caratteristica e` stata il cambiamento di proprieta`, non la liberalizzazione. Le modalita` della privatizzazione, determinate dall`interagire del governo con potenti gruppi di pressione, stanno ora ripercuotendosi sui mercati delle utility, con il pericolo di una loro ri-politicizzazione.

  6. Effect of sous vide processing on physicochemical, ultrastructural, microbial and sensory changes in vacuum packaged chicken sausages.

    Science.gov (United States)

    Naveena, B M; Khansole, Panjab S; Shashi Kumar, M; Krishnaiah, N; Kulkarni, Vinayak V; Deepak, S J

    2017-01-01

    The processing of sous vide chicken sausages was optimized under vacuum packaging condition and cooking at 100 ℃ for 30 min (SV30), 60 min (SV60) and 120 min (SV120) and compared with aerobically cooked control at 100 ℃ for 30 min. Sous vide processing of chicken sausages (SV30) produced higher (p emulsion ultra-structure due to SV30 processing relative to control sausages. Sous vide processing of chicken sausages enriched with rosemary diterpene phenols retained the freshness and quality up to 120 days during storage at 4 ± 1 ℃ relative to control sausages that were spoiled on 20th day. Lipid oxidation and microbial growth remained below the spoilage levels for all the SV-processed sausages throughout the storage and addition of rosemary diterpene mixture at 0.02% v/w reduced the microbial growth and improved (p < 0.05) the sensory attributes. Our results demonstrate that sous vide processing minimizes lipid oxidation and microbial growth of chicken sausages with improved product quality and shelf-life at 4 ± 1 ℃. © The Author(s) 2016.

  7. Guide pour la rédaction de cahiers des charges pour la sous-traitance en mécano-soudage

    CERN Document Server

    Cheminat, Olivier

    2016-01-01

    Ce rapport est principalement dédié aux rédacteurs de cahiers des charges lors de sous-traitance en soudage. Le choix de faire sous-traiter une fabrication et le choix du sous-traitant revêtent une triple dimension technique, économique et stratégique. Un sous-traitant n'est pas un simple fournisseur ; il est un véritable partenaire technique pour le donneur d'ordre qui lui confie la réalisation d'un produit qu'il a lui-même conçu. La sous-traitance nécessite alors, outre un audit préalable du partenaire, un suivi en continu, à distance, et une communication entre le donneur d'ordre et le sous-traitant. Le cahier des charges est un des éléments de cette communication. C'est un outil essentiel, notamment lorsque le marché est soumis à des normes, imposées par contrat entre le donneur d'ordre et le sous-traitant. Ce présent document est un guide pour la rédaction du document de consultation, afin d'être le plus précis et exhaustif possible, mais il ne saurait être utilisé pour établi...

  8. Couches minces supraconductrices à haute température critique pour l'électronique

    Science.gov (United States)

    Guilloux-Viry, M.; Perrin, A.

    1998-08-01

    High critical temperature superconductors (HTCS) are very promising for applications in microelectronics due to the control of high quality epitaxial thin films, in spite of a number of specific constraints. Active and passive devices are already available in various laboratories, prooving that applications are actually expected soon. We report here on the interest of HTCS thin films, on preparation processes including materials and substrates choice, and also on characterization methods which are required in order to chek the quality of the samples. Finally some illustrative examples of applications are presented. Les supraconducteurs à haute température critique ouvrent des perspectives prometteuses dans le domaine de l'électronique en raison de la maîtrise de la croissance de films minces de haute qualité cristalline et physique, malgré des difficultés spécifiques. Des dispositifs, aussi bien actifs que passifs, commencent à être réalisés dans divers laboratoires, montrant que des applications peuvent être effectivement envisagées à relativement court terme.

  9. Medicinal Plants Used for Neuropsychiatric Disorders Treatment in the Hauts Bassins Region of Burkina Faso

    Directory of Open Access Journals (Sweden)

    Prosper T. Kinda

    2017-05-01

    Full Text Available Background: In Burkina Faso, phytotherapy is the main medical alternative used by populations to manage various diseases that affect the nervous system. The aim of the present study was to report medicinal plants with psychoactive properties used to treat neuropsychiatric disorders in the Hauts Bassins region, in the western zone of Burkina Faso. Methods: Through an ethnobotanical survey using structured questionnaire, 53 traditional healers (TH were interviewed about neuropsychiatric disorders, medicinal plants and medical practices used to treat them. The survey was carried out over a period of three months. Results: The results report 66 plant species used to treat neuropsychiatric pathologies. Roots (36.2% and leaves (29% were the main plant parts used. Alone or associated, these parts were used to prepare drugs using mainly the decoction and the trituration methods. Remedies were administered via drink, fumigation and external applications. Conclusions: It appears from this study a real knowledge of neuropsychiatric disorders in the traditional medicine of Hauts Bassins area. The therapeutic remedies suggested in this work are a real interest in the fight against psychiatric and neurological diseases. In the future, identified plants could be used for searching antipsychotic or neuroprotective compounds.

  10. U-Pb geochronology on zircon from the Aouli pluton, Haute Moulouya area, Morocco

    International Nuclear Information System (INIS)

    Oukemeni, D.; Krogh, T.E.

    1995-01-01

    The Aouli Pluton consists of four units: (1) granodiorite; (2) grey granite; (3) pink granite - these three units constituting a spatially continuous massif, and (4) muscovite granite, which is exposed in two small stocks somewhat removed from the other units. U-Pb ages obtained on zircon and titanite are 333 ± 2 Ma and 319 ± 1.5 Ma for the granodiorite and grey granite respectively. The 14 ma age difference between the granodiorite and the grey granite supports the multiple injection hypothesis which was the outcome of geochemical studies (Oukemeni and Bourne, 1993). These two rocks also contain an inherited component which has been dated at 1520 Ma in the granudiorite and at 1245 ma and 1804 Ma in the grey granite. The inherited components suggest the possible presence of Precambian crust below the Haute Moulouya. Since the intrusion is late-to post-tectonic (Oukemeni and Bourne, 1993), the age of the granodiorite (333 ± 2 Ma) indicates that the Hercynian deformation is pre-Visean in the Haute Moulouya area, and, by extension, throughout the eastern meseta region. (authors). 14 refs. 4 figs. 3 tabs

  11. Lambeaux autofermants pour le traitement des brulures electriques du scalp par haut voltage

    Science.gov (United States)

    Hafidi, J.; El Mazouz, S.; El Mejatti, H.; Fejjal, N.; Gharib, N.E.; Abbassi, A.; Belmahi, A.M.

    2011-01-01

    Summary Les brûlures électriques par haut voltage sont responsables de gros dégâts tissulaires en immédiat et dans les jours suivant l’accident du fait de la chaleur importante dégagée par effet joule et de la thrombose microvasculaire évolutive. Les pertes de substances du scalp secondaires à ces brûlures nécessitent une couverture par lambeaux vu la destruction du périoste et du calvarium en regard. De juin 1997 à juin 2008, 15 patients ont été traités pour des pertes de substance du scalp secondaires à des brûlures électriques par haut voltage de diamètre allant de 8 à 11 cm et siégeant dans la région tonsurale. Ces patients ont été opérés dans la première semaine suivant l’accident. Les pertes de substance du scalp de taille moyenne secondaires à ces brûlures peuvent être couvertes per primam de façon fiable par des lambeaux locaux axialisés et multiples. Nous relatons l’expérience du Service de Chirurgie Plastique du Centre Hospitalier Universitaire Ibn-Sina, Rabat, Maroc, dans la gestion et la prise en charge de ces brûlures. PMID:22262963

  12. Registration of vehicles at the Gex sous-préfecture: now by appointment only

    CERN Multimedia

    2016-01-01

    The Gex sous-préfecture has informed CERN that it has taken the following steps in order to reduce waiting times at its counters for the issue of carte grise vehicle registration certificates. As of 1 February 2016, you must book an appointment via the website http://www.rdv.ain.gouv.fr/ for all services relating to the registration of vehicles, in particular the:   change of the holder of a registration certificate, issue of a certificat de situation administrative (administrative status certificate required for the sale of a vehicle), change of marital status (or company name in the case of legal entities), change of address, change in the technical specification of the vehicle, corrections to registration certificates, equests for duplicates (loss or theft of registration certificates), registration of a diplomatic vehicle (CERN), registration of a new vehicle, registration of vehicles purchased tax-free in the Pays de Gex free zone (formerly TTW series), and import of vehicles (from ...

  13. Patrimonialiser les bases de sous-marins et le Mur de l’Atlantique

    OpenAIRE

    Prelorenzo, Claude

    2014-01-01

    Le Mur de l’Atlantique court de la frontière espagnole jusqu’au nord de la Norvège. Au sein de ce dispositif sont installées cinq bases de sous-marins : Dunkerque, Saint-Nazaire, Lorient, La Rochelle et Bordeaux. Après une période de purgatoire, liée aux souvenirs trop frais des bombardements qu’ils ont attirés sur les villes, les édifices du mur sont entrés dans la sphère de la culture et du tourisme. Nous posons alors la question suivante : de quoi ces édifices portent-ils témoignage, et no...

  14. Raconter l’Histoire (sous la direction de Prstojevic A.

    Directory of Open Access Journals (Sweden)

    Sophie Thiriar

    2011-10-01

    Full Text Available Sous le titre Raconter l’Histoire, Alexandre Prstojevic a réuni treize articles, faisant suite à deux colloques qui ont eu lieu à Paris en mai 2006 et à Montréal en octobre de la même année. Treize pointures du monde slave se sont intéressées pour l’occasion à la représentation littéraire et cinématographique de l’histoire – principalement celle de l’Europe centrale et orientale – après le spectacle mortifère des deux guerres mondiales. Suite aux multiples expériences déshumanisantes dont est...

  15. Situation of methanization installations in Haute-Normandie. Phase 2: Assessment of the regional sector. Phase 3: Development perspectives for the methanization sector in Haute-Normandie. To understand methanization. Haute-Normandie Commission of expertise on methanization

    International Nuclear Information System (INIS)

    Convert, Mathilde

    2012-10-01

    A first report proposes an analysis of the situation of methanization installations in the Haute-Normandie region while recalling the national context. It briefly reports an analysis and assessment of waste flows, processed effluents, by-products and biomass displaying an energetic potential. It describes methanization installations by addressing the different steps of the methanization process, by presenting the different digestion indicators, by briefly evoking the issue of the return-to-soil of digestates, and by presenting various operational data. Financial aspects are then addressed (investments and subsidies, financial balance of farm-based and collective installations), and an overview of methanization projects in the region and development perspectives is proposed. The second report more precisely analyses development perspectives for the methanization sector in the region through a brief assessment of the methanizable organic substrate resource, a discussion of different associated challenges (energy, agronomic, environmental and societal), a discussion of development levers and brakes, and an analysis of competitions (related to the use of industrial by-products, between processing installations, and related to agricultural soils). Another document proposes an overview of various aspects of methanization: a tool for territorial development, regulatory framework, evolution of installations in the region, assets of methanization, and role of the regional commission of expertise on methanization

  16. Physical properties of high-Tc superconducting oxides. Modification of tc using organic dopants. Final report. Proprietes physiques d'oxydes supraconducteurs a haute Tc. Modification de tc sous l'effet de dopants organiques

    Energy Technology Data Exchange (ETDEWEB)

    Brau, A

    1993-01-01

    An attempt was made to significantly modify the Tc transition temperature of certain copper-based superconducting oxides by introducing organic or mineral dopants, and to study the mobility of 300K-carriers in crystallized tallium-base superconducting oxides. Since the critical transition temperature of superconducting oxides is highly influenced by the density of the free carriers they contain, the authors tried making superconducting powders react with either an organic electron acceptor or a mineral compound. The goal was to increase the density of the holes by altering the copper's degree of oxidation. Their preparatory work showed a direct charge-transfer reaction between the electron-donor copper and the acceptor TCNQ and studied the degree to which the electron acceptor can alter the copper's oxidation. Initial results also showed that dopants can affect superconducting Tc and the course of R(T) curves.

  17. Local approach: fracture at high temperature in an austenitic stainless steel submitted to thermomechanical loadings. Calculations and experimental validations; Approche locale: fissuration a haute temperature dans un acier inoxydable austenitique sous chargements thermomecaniques. Simulations numeriques et validations experimentales

    Energy Technology Data Exchange (ETDEWEB)

    Poquillon, D

    1997-10-01

    Usually, for the integrity assessment of defective components, well established rules are used: global approach to fracture. A more fundamental way to deal with these problems is based on the local approach to fracture. In this study, we choose this way and we perform numerical simulations of intergranular crack initiation and intergranular crack propagation. This type of damage can be find in components of fast breeder reactors in 316 L austenitic stainless steel which operate at high temperatures. This study deals with methods coupling partly the behaviour and the damage for crack growth in specimens submitted to various thermomechanical loadings. A new numerical method based on finite element computations and a damage model relying on quantitative observations of grain boundary damage is proposed. Numerical results of crack initiation and growth are compared with a number of experimental data obtained in previous studies. Creep and creep-fatigue crack growth are studied. Various specimen geometries are considered: compact Tension Specimens and axisymmetric notched bars tested under isothermal (600 deg C) conditions and tubular structures containing a circumferential notch tested under thermal shock. Adaptative re-meshing technique and/or node release technique are used and compared. In order to broaden our knowledge on stress triaxiality effects on creep intergranular damage, new experiments are defined and conducted on sharply notched tubular specimens in torsion. These isothermal (600 deg C) Mode II creep tests reveal severe intergranular damage and creep crack initiation. Calculated damage fields at the crack tip are compared with the experimental observations. The good agreement between calculations and experimental data shows the damage criterion used can improve the accuracy of life prediction of components submitted to intergranular creep damage. (author) 200 refs.

  18. Study of alloy 600`S stress corrosion cracking mechanisms in high temperature water; Etude des mecanismes de corrosion sous contrainte de l`alliage 600 dans l`eau a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Rios, R

    1994-06-01

    In order to better understand the mechanisms involved in Alloy 600`s stress corrosion cracking in PWR environment, laboratory tests were performed. The influence of parameters pertinent to the mechanisms was studies : hydrogen and oxygen overpressures, local chemical composition, microstructure. The results show that neither hydrogen nor dissolution/oxidation, despite their respective roles in the process, are sufficient to account for experimental facts. SEM observation of micro-cleavage facets on specimens` fracture surfaces leads to pay attention to a new mechanism of corrosion/plasticity interactions. (author). 113 refs., 73 figs., 15 tabs., 4 annexes.

  19. Analyse of the potential of the high temperature reactor with respect to the use of fissile materials; Analyse des capacites des reacteurs a haute temperature sous l'aspect de l'utilisation des matieres fissiles

    Energy Technology Data Exchange (ETDEWEB)

    Damian, F

    2001-07-01

    The high temperature reactors fuel is made of micro-particles dispersed in a graphite matrix. This configuration makes it possible to reach high burnup, higher than 700 GWj/t. Thanks to the decoupling between the thermal and the neutronic behaviors in the core many types of fuels can be used. These characteristics give to HTR reactor very good capacities to burn fissile materials. This work was done in the frame of the evaluation of HTR capacities to enhance the value of the plutonium stocks. These stocks are currently composed of the irradiated fuels discharged from classical PWR or the dismantling of the nuclear weapons and represent a significant energy potential. These studies concluded that high cycles length can be reached whatever the plutonium quality is (from 50 % to 94 % of fissile plutonium). In addition, it was demonstrated that the moderator temperature coefficient becomes locally positive for highly burn fuel while the core global moderator temperature coefficient remained negative in the operation range of the reactor. A significant share of this work was first devoted to the setting of a modeling of the fuel element but also of the reactor's core with the codes of system SAPHYR. The whole of modeling was validated by reference calculations. This work of code assessment is justified by a preliminary work that showed that the classical calculation scheme used for PWR could not be transposed directly to HTR core. (author)

  20. Situation de la cercosporiose noire des bananiers et plantains Musa spp. sous différents systèmes de culture à Yangambi, Haut-Zaïre

    Directory of Open Access Journals (Sweden)

    Mobambo, KN.

    1993-01-01

    Full Text Available Black sigatoka situation of bananas and plantains Musa spp. under different farming systems at Yangambi, Upper-Zaire. Black sigatoka, a leaf spot disease, caused by Mycosphaerella fijiensis Morelet seems to be one of the major constraints in the banana and plantain production in Upper-Zaire. Indeed, a survey study undertaken at Yangambi on 12 plantain and 4 banana cultivars revealed that all the observed cultivars were attacked with an exception of banana "Yangambikm 5" which was tolerant. In otherhand, significant differences were observed between bananas and plantains cultivated in fields and those planted in backyards. The regular application of organic matter in backyard farms seems to be one of the major reasons of those differences.

  1. Analyse of the potential of the high temperature reactor with respect to the use of fissile materials; Analyse des capacites des reacteurs a haute temperature sous l'aspect de l'utilisation des matieres fissiles

    Energy Technology Data Exchange (ETDEWEB)

    Damian, F

    2001-07-01

    The high temperature reactors fuel is made of micro-particles dispersed in a graphite matrix. This configuration makes it possible to reach high burnup, higher than 700 GWj/t. Thanks to the decoupling between the thermal and the neutronic behaviors in the core many types of fuels can be used. These characteristics give to HTR reactor very good capacities to burn fissile materials. This work was done in the frame of the evaluation of HTR capacities to enhance the value of the plutonium stocks. These stocks are currently composed of the irradiated fuels discharged from classical PWR or the dismantling of the nuclear weapons and represent a significant energy potential. These studies concluded that high cycles length can be reached whatever the plutonium quality is (from 50 % to 94 % of fissile plutonium). In addition, it was demonstrated that the moderator temperature coefficient becomes locally positive for highly burn fuel while the core global moderator temperature coefficient remained negative in the operation range of the reactor. A significant share of this work was first devoted to the setting of a modeling of the fuel element but also of the reactor's core with the codes of system SAPHYR. The whole of modeling was validated by reference calculations. This work of code assessment is justified by a preliminary work that showed that the classical calculation scheme used for PWR could not be transposed directly to HTR core. (author)

  2. Development of ODS ferritic-martensitic steels for application to high temperature and irradiation environment; Developpement d'une nouvelle nuance martensitique ODS pour utilisation sous rayonnement a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Lambard, V

    2000-07-01

    Iron oxide dispersion strengthened alloys are candidate for nuclear fuel cladding. Therefore, it is crucial to control their microstructure in order to optimise their mechanical properties at temperatures up to 700 deg C. The industrial candidates, ODS ferritic alloys, present an anisotropic microstructure which induces a weakening of mechanical properties in transversal direction as well as the precipitation of brittle phases under thermal aging and irradiation. For this purpose, we tried to develop a material with isotropic properties. We studied several 9Cr-1Mo ferritic/martensitic alloys, strengthened or not by oxide dispersion. The mechanical alloying was performed by attribution and powders were consolidated by hot extrusion. In this work, different metallurgical characterisation techniques and modelling were used to optimise a new martensitic ODS alloy. Microstructural and chemical characterization of matrix has been done. The effect of austenitizing and isochronal tempering treatments on microstructure and hardness has been studied. Oxide distribution, size and chemical composition have been studied before and after high temperature thermal treatment. The study of phase transformation upon heating has permitted the extrapolation to the equilibrium temperature formation of austenite. Phase transformation diagrams upon cooling have been determined and the transformation kinetics have been linked to austenite grain size by a simple relation. Fine grain size is unfavourable for the targeted application, so a particular thermal treatment inducing a coarser grain structure has been developed. Finally, tensile properties have been determined for the different microstructures. (author)

  3. 75 FR 9436 - Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN...

    Science.gov (United States)

    2010-03-02

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,041] Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN; Notice of Affirmative Determination Regarding Application for Reconsideration By application dated January 29, 2010, the petitioner...

  4. Jasrouxite, a new Pb-Ag-As-Sb member of the lillianite homologous series from Jas Roux, Hautes Alpes, France

    DEFF Research Database (Denmark)

    Topa, Dan; Makovicky, Emil; Favreau, Georges

    2013-01-01

    The thallium-rich sulfosalt deposit of Jas Roux, situated in the Pelvoux Massif (Hautes-Alpes de´partement, France), occurs in a Triassic sedimentary series. Jasrouxite belongs to the early lead-containing stages of the Tl–As–Sb period of mineralization. It occurs in a silicified gangue, along wi...

  5. Pensées répétitives et contrôle cognitif : quels liens avec l'anxiété et la dépression ?

    OpenAIRE

    Ismaili, Tringa

    2013-01-01

    L’objectif de cette recherche a été d’examiner les liens entre : (1) deux formes de pensées répétitives (PR), les ruminations et les inquiétudes, et les symptômes d’anxiété et de dépression ; (2) entre le processus de flexibilité de source et la fréquence de diverses pensées répétitives. 97 jeunes adultes issus de la population générale ont été inclus dans l’étude. Les analyses de corrélations ont montré de forts liens entre les PR et les symptômes d’anxiété et de dépression. Une analyse de c...

  6. Les Hauts de la Réunion conquis par les loisirs

    Directory of Open Access Journals (Sweden)

    Patrick BOUCHET

    1998-09-01

    Full Text Available En un peu plus d'une décennie, les Hauts de la Réunion sont devenus très fréquentés en raison de la conjonction d'une demande croissante et d'une offre qui s'est améliorée et diversifiée. Trop rapidement assimilée à du tourisme rural, cette conquête n'est pas homogène. L'analyse des pratiques contrastées des visiteurs permet de mettre en évidence une nouvelle organisation spatiale de l'intérieur de l'île.

  7. Les particules illocutoires, variable d’ajustement de la traduction sous-titrante au cinéma

    Directory of Open Access Journals (Sweden)

    Ève Vayssière

    2010-12-01

    Full Text Available Die illokutiven Partikel fungieren als Anpassungsvariable, die beim Übersetzungsakt zur Untertitelung von Filmen entweder weggelassen werden oder erscheinen. Wenn sie einfach gelöscht werden, ergeben sich weder grammatikalische Störungen noch Informationsverlust. Das Auftauchen dieser Partikel in den deutschen Untertiteln zeigt jedoch, wie wichtig sie sind: Als Partikel der Oralität tragen sie zur Idiomatizität bei.Les particules illocutoires sont des variables d’ajustement lors de l’acte de traduction sous-titrante au cinéma, elles peuvent être supprimées sans que cela occasionne de dysfonctionnement grammatical et elles disparaissent lors de la traduction en français sans que cela occasionne une perte d’informations. Leur apparition dans les sous-titres allemands montre néanmoins leur importance : particules de l’oralité, elles sont vecteur d’« idiomaticité ».

  8. Experimental characterization of the hydro-mechanical behaviour of Meuse/Haute-Marne argilites

    International Nuclear Information System (INIS)

    Escoffier, S.

    2002-04-01

    Within the framework of a feasibility study of underground radioactive waste repository the experimental characterization of the coupled behavior of the host layer is of first importance. This work concerns the experimental characterization in laboratory of the poro-elastic behavior of argillite which constitutes the host layer of the future underground laboratory of ANDRA located at the limit of the Meuse/Haute-Marne. The theoretical approach is the Mechanics of Porous Media defined by Coussy [1991] which has the advantage of providing a formulation of the behavior laws using measurable parameters in laboratory. The difficulties or the feasibility of the characterization tests of these rocks coupled behavior are related to their very low permeability which requires an adaptation of the experimental devices initially used on more permeable rocks. Initially a synthesis on the knowledge of the poro-elastic parameters of Meuse/Haute-Marne argillite is given. Thereafter a first approach of the use of the studies of sensitivity as tools of decision-making aid is proposed. The experimental difficulties encountered by the various experimenters are illustrated by the diversity of the experimental choices, the test duration or by the results disparity. Because of economic, political and ecological stake, the studies of sensitivity could make it possible to direct the experimental efforts by giving indications on the dominating parameters in the coupled behavior of a rock. In the second time after the presentation of the test results of physical characterization 3 types of tests are described: permeability test (pulse test), determination of Biot coefficient under odometric loading and isotropic drained test. The complexity of these tests is related to the attack of the experimental limits. They are presented in detail: theoretical recalls, experimental set up, experimental protocol, unfolding and test results. (author)

  9. Patrimonialiser les bases de sous-marins et le Mur de l’Atlantique

    Directory of Open Access Journals (Sweden)

    Claude Prelorenzo

    2011-06-01

    Full Text Available Le Mur de l’Atlantique court de la frontière espagnole jusqu’au nord de la Norvège. Au sein de ce dispositif sont installées cinq bases de sous-marins : Dunkerque, Saint-Nazaire, Lorient, La Rochelle et Bordeaux. Après une période de purgatoire, liée aux souvenirs trop frais des bombardements qu’ils ont attirés sur les villes, les édifices du mur sont entrés dans la sphère de la culture et du tourisme. Nous posons alors la question suivante : de quoi ces édifices portent-ils témoignage, et nous envisageons plusieurs aspects : leur évident modernisme qui les situe à un moment de l’histoire de l’architecture, leur hétérogénéité qui fait de ces bâtiments des sortes d’ovni, sans aucun rapport ni d’échelle ni de forme avec l’architecture civile, une technique d’enfouissement et de camouflage génératrice d’un nouveau paysage. Mais ces édifices peuvent-ils être exonérés de leur but guerrier ? Quel est le message de leur recyclage dans le culturel, le festif ou le commercial ? Deux bases de sous-marins sont plus particulièrement présentées, celle de Saint-Nazaire et celle de Lorient.The Atlantic Wall stretches from the Spanish border to northern Norway. Within this system there are five bases for submarines: Dunkirk, Saint-Nazaire, Lorient, La Rochelle and Bordeaux. After a period of purgatory, with the painful memories of the wartime air raids which destroyed the cities around the bases, the buildings which the Atlantic Wall comprises have now entered the spheres of culture and tourism. What do these buildings bear witness to? Their frank modernism puts them at a precise moment in the history of architecture. Their heterogeneity makes them like UFOs, without any relation of scale or form to civil architecture. Their specific techniques of dissimulation and camouflage created new landscapes. But can these buildings be freed from the memories of their original military purpose? What message is

  10. Effects of combined electron-beam irradiation and sous-vide treatments on microbiological and other qualities of chicken breast meat

    International Nuclear Information System (INIS)

    Shamsuzzaman, K.; Lucht, L.; Chuaqui-Offermanns, N.

    1994-01-01

    The microbiological safety, refrigeration shelf-life, and nutritional quality of chicken breast meat were investigated following combined electron-beam irradiation and cooking under vacuum (sous-vide). Chicken breast meat inoculated with 10 6 CFU/g of Listeria monocytogenes was irradiated with an electron beam at doses up to 3.1 kGy under vacuum in barrier bags, cooked in a boiling water bath for 3 min 45 s (previously determined to achieve an internal temperature of 71.1 o C), and stored at 8 o C for up to 5 weeks. Listeria was undetectable in samples treated with combined sous-vide and irradiation at 3.1 kGy, but the organism survived the sous-vide treatment without irradiation and multiplied during storage. A similar study, conducted with uninoculated chicken breast meat, revealed that the product which received both irradiation (3 kGy) and sous-vide treatment had a shelf-life of at least 8 weeks at 8 o C, whereas the unirradiated samples treated sous-vide spoiled in 16 days. Listeria was undetectable in combination treated samples, but some of the unirradiated sous-vide samples tested after long storage showed high levels of Listeria. Some loss of thiamine occurred with the combined treatments. (author)

  11. Plasma Equilibrium in a Torus with High-Frequency Fields and Plasma Heating Resulting from the Development of a Powerful Beam of ''Escaping Electrons''; Plasma Torique: Stabilisation au Moyen de Champs de Haute Frequence et Chauffage par Formation d'un Flux Intense d'Electrons 'Emballes'; Ehksperimental'noe issledovanie ravnovesiya plazmy v tore pri nalichii vysokochastotnykh polej i nagreva plazmy za schet razvitiya moshchnogo puchka ''ubegayushchikh ehlektronov''; Equilibrio del Plasma en un Toro, en Presencia de Campos de Alta Frecuencia, y Calentamiento del Plasma por el Desarrollo de un Haz Potente de 'Electrones Desbocados '

    Energy Technology Data Exchange (ETDEWEB)

    Demirkhanov, R. A.; Kirov, A. G.; Stotland, M. A.; Malykh, N. I.; Horasanov, G. L.; Vishnevskij, N. K.; Gutkin, T. I.; Jampol' skij, I. R. [Fiziko-Tehnicheskij Institut Gosudarstvennogo Komiteta po Ispol' zovaniju Atomnoj Ehnergii SSSR, Sukhumi, SSSR (Russian Federation)

    1966-04-15

    electron temperature of the order of a few eV. When a rotating quadrupole high-frequency field is applied, the plasma is forced away from the walls and is localized in the centre with an increase in temperature. Attention was also paid to heating by a strong electric field in the absence of a rotating high-frequency quadrupole field. In this case, when the electric field is E{sub z} = 100 to 200 V cm{sup -}{sub 1}, a current Jp=3 to 5 kA is developed in the plasma; on being strongly damped, this current becomes essentially ohmic in character. At the same time the voltage in the bypass is very strongly damped in comparison with the inactive condition, which indicates effective absorption of the loop energy by the plasma. The energy absorbed by the plasma during the first half-cycle of the current, that is during about 1{mu}s, represents about 20 J, and the conductivity of the plasma is anomalously low. When heating is performed by a strong electric field, an intensive burst of X-radiation with an energy of the order of 100 keV is observed, together with the emission of.micro-wave noises at frequencies close to that of the plasma. (author) [French] Le memoire decrit les experiences qui ont ete effectuees dans l'installation RT-0. Cette installation est constituee par un tore ayant un grand diametre de 100 cm et un petit diametre de 10 cm. Le long de la chambre, il se forme un champ magnetique torique d'environ 6 kOe. L'ignition du plasma se fait sous une pression superieure ou egale a 5 x 10{sup -4} Torr au moyen d'un champ electrique longitudinal tournant (8,3 MHz). Au voisinage de la paroi de la chambre se trouve un champ quadripolaire de haute frequence (540 kHz), qui tourne autour du plus petit diametre, avec H{phi} = 200 Oe. Lorsque le banc de condensateurs a faible induction envoie une decharge dans les spires disposees le long du tore, il peut se creer a l'interieur de la chambre un champ electrique turbulent du type decroissant, ayant une intensite maximum E{sub z

  12. Production durable de légumes sous-utilisés en vue d'améliorer la ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Production durable de légumes sous-utilisés en vue d'améliorer la sécurité alimentaire en milieu ruralrity (Les légumes indigènes revêtent une importance capitale pour les femmes pauvres vivant en milieu rural, mais ont reçu, à ce jour, peu d'attention de la part des milieux de la recherche, du développement et des ...

  13. Integral modeling and financial impact of the geothermal situation and power plant at Soultz-sous-Forets

    International Nuclear Information System (INIS)

    Heidinger, Ph.

    2010-01-01

    The science about deep Enhanced Geothermal Systems (EGS) is still an emerging process and for further spreading economics is the key of the technology. To understand the financial situation, a program for economic evaluation was developed. This software (Euronaut) is completely modularized and considers all cash flows. Projects like an EGS are wrapped into tree-like structures. Based on the results which were gained at Soultz-sous-Forets, two configurations were designed. The first EGS configuration consists of a simplified two well (doublet) system where the dependencies of all components (mainly the reservoir, wells, pumps and the heat-to-power conversion unit) are physically and economically linked together. The realization of these dependencies and their complex interactions enable a sensitivity analysis of the borehole depth and reservoir depth, respectively. As a result, depth dependent effective costs and revenues of an EGS plant with the geohydrological characteristics of Soultz-sous-Forets are determined. As a future development, the second configuration will adapt the actual situation at Soultz-sous-Forets with the individual features of all four wells (GPK1 - GPK4). Then, this model can be used for all kinds of sensitivity analyses to clarify the impact of certain components or to optimize the operation scheme; e.g. the flow rates. (author)

  14. Pressure regulation in the dry-boxes. Argon purification; Regulation de pression dans les boites a gants. Purification d'argon

    Energy Technology Data Exchange (ETDEWEB)

    Pascard, R; Fabre, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Each dry-box is equipped with an autonomous installation for circulation and purification of argon and for pressure regulation. This installation consists essentially of a ballast tank, a compressor and two valves electromagnetically controlled by a contact manometer. The compressor and the valves are enclosed in the tank to form a system as compact as possible. The argon is purified by passing it over a furnace filled with titanium-zirconium turnings brought to about 800 deg. C, branching off the main system. With this set-up as well as the automatic maintenance of a constant depression in the box, a quality of argon is obtained whose oxygen contact is undetectable by the manganous hydroxide method. (author) [French] Chaque boite a gants est munie d'une installation autonome de circulation purification d'argon et de regulation de pression. Cette installation comprend essentiellement un reservoir tampon, un compresseur et deux vannes electromagnetiques commandees par un manometre a contact. Le compresseur et les vannes sont enfermes dans le reservoir de maniere a realiser un ensemble aussi compact que possible. L'argon est purifie par passage dans un four en derivation charge de tournure de titane-zirconium, porte a environ 800 deg. C. Avec ce dispositif, on obtient, outre le maintien automatique d'une depression constante dans la boite, un argon dont la teneur en oxygene est indecelable par la methode a l'hydrate manganeux. (auteur)

  15. Improvement of microbiological safety of sous-vide meals by gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    Farkas, J. E-mail: huto@omega.kee.hu; Polyak-Feher, K.; Andrassy, E.; Meszaros, L

    2002-03-01

    Experimental batches of smoked-cured pork in stewed beans sauce were inoculated with spores of psychrotrophic Bacillus cereus, more heat and radiation resistant than spores of non-proteolytic C. botulinum. After vacuum packaging, the meals were treated with combinations of pasteurizing heat treatments and gamma irradiation of 5 kGy. Prior and after treatments, and periodically during storage at 10 deg. C, total aerobic and total anerobic viable cell counts, and selectively, the viable cell counts of B. cereus and sulphite-reducing clostridia have been determined. The effects of the treatment order as well as addition of nisin to enhance the preservative efficiency of the physical treatments were also studied. Heat-sensitization of bacterial spores surviving irradiation occurred. The quality-friendly sous-vide cooking in combination with this medium dose gamma irradiation and/or nisin addition increased considerably the microbiological safety and the keeping quality of the meals studied. However, approx. 40% loss of thiamin content occurred as an effect of combination treatments, and adverse sensorial effects may also limit the feasible radiation doses or the usable concentrations of nisin.

  16. Improvement of microbiological safety of sous-vide meals by gamma radiation

    International Nuclear Information System (INIS)

    Farkas, J.; Polyak-Feher, K.; Andrassy, E.; Meszaros, L.

    2002-01-01

    Experimental batches of smoked-cured pork in stewed beans sauce were inoculated with spores of psychrotrophic Bacillus cereus, more heat and radiation resistant than spores of non-proteolytic C. botulinum. After vacuum packaging, the meals were treated with combinations of pasteurizing heat treatments and gamma irradiation of 5 kGy. Prior and after treatments, and periodically during storage at 10 deg. C, total aerobic and total anerobic viable cell counts, and selectively, the viable cell counts of B. cereus and sulphite-reducing clostridia have been determined. The effects of the treatment order as well as addition of nisin to enhance the preservative efficiency of the physical treatments were also studied. Heat-sensitization of bacterial spores surviving irradiation occurred. The quality-friendly sous-vide cooking in combination with this medium dose gamma irradiation and/or nisin addition increased considerably the microbiological safety and the keeping quality of the meals studied. However, approx. 40% loss of thiamin content occurred as an effect of combination treatments, and adverse sensorial effects may also limit the feasible radiation doses or the usable concentrations of nisin

  17. Shelf Life of Chicken Meat Balls Submitted to Sous Vide Treatment

    Directory of Open Access Journals (Sweden)

    ÖP Can

    2015-06-01

    Full Text Available The objective of this study was to investigate the appropriate temperature for processing storage of chicken meatballs made of minced chicken meat with the sous vide method. The chicken meatballs were prepared and separated into four experimental groups according to the application of heat treatment (10 and 20 minutes and storage time (+2 and +10°C. Sensory, microbiological (total aerobic mesophilic bacteria, total psychrotrophs, lactic acidbacteria, Enterobacteriaceae, Clostridiumperfringens, Listeria spp., chemical (pH, thiobarbituric acid, color (L*, a*, b* values, and texture profile analyses were performed on meatball samples. Cl. perfringens and Listeria spp. were not detected in meatball samples during the storage period. Samples cooked at 10 minute and stored at +2°C the highest count of total aerobic mesophilic bacteria (p<0.05. For lipid oxidation, interaction was observed between cooking time and storage temperature, with higher TBARs values for samples stored at 10 °C, while cooking time and storage temperature showed no influence on the color and textural analysis parameters. For the treatments evaluated, cooking time x storage temperature seem affect more microbiological and chemical parameters than color and textural parameters of chicken meatballs.

  18. Installation for analytic chemistry under irradiation; Installation de chimie analytique sous rayonnement

    Energy Technology Data Exchange (ETDEWEB)

    Fradin, J; Azoeuf, P; Guillon, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-07-01

    An installation has been set up for carrying out manipulations and chemical analyses on radioactive products. It is completely remote-controlled and is of linear shape, 15 metres long; it is made up of three zones: - an active zone containing the apparatus, - a rear zone giving access to the active zone, - a forward zone independent of the two others and completely protected from which the remote-control of the apparatus is effected. The whole assembly has been designed so that each apparatus corresponding to an analytical technique is set up in a sealed enclosure. The sealed enclosures are interconnected by a conveyor. After three years operation, a critical review is now made of the installation. (authors) [French] L'installation a ete realisee pour effectuer des manipulations et des analyses chimiques sur des produits radioactifs. Elle est totalement telecommandee et se presente sous une forme lineaire de 15 metres de longueur et comporte trois zones: - une zone active d'appareillage, - une zone arriere d'intervention, - une zone avant independante des deux premieres et totalement protegee, ou s'operent les telecommandes de l'appareillage. L'ensemble a ete concu de facon a ce que chaque appareillage correspondant a une technique d'analyse soit implante dans une enceinte etanche. Les enceintes etanches sont reliees entre elles par un convoyeur. Apres trois annees de fonctionnement nous faisons le bilan et les critiques de l'installation. (auteurs)

  19. Phenomenologie et caractérisation des supraconducteurs à haute Tc

    OpenAIRE

    Peyral , P.; Lebeau , C.; Rosenblatt , J.; Burin , Jean-Philippe; Raboutou , A.; Pena , O.; Perrin , C.

    1991-01-01

    Les propriétés de transport des supraconducteurs dépendent à la fois de la structure microscopique du matériau idéal et des caractéristiques mésoscopiques (la granularité) de chaque échantillon. Du point de vue expérimental il est essentiel de pouvoir séparer leurs effet respectifs. Nous parvenons à cette séparation en décrivant quantitativement la transition résistive sous champ nul en deux étapes: supraconductrice intragranulaire et cohérente intergranulaire. Des théories connues des fluctu...

  20. Les tuméfactions sous mandibulaires: à propos de 42 cas et revue de la literature

    Science.gov (United States)

    Darouassi, Youssef; Mliha Touati, Mohamed; Chihani, Mehdi; Nadour, Karim; Ammar, Haddou; Bouaity, Brahim

    2014-01-01

    Les tuméfactions de la région sous mandibulaire sont une entité pathologique fréquente, caractérisées par un tableau clinique et une démarche diagnostique stéréotypée, et une unicité presque constante au plan chirurgical. Notre travail est une étude rétrospective sur une période de 5 an d'une série consécutive de 42 cas de tuméfactions sous mandibulaires qui ont été colligés au service d'oto-rhino-laryngologie et de chirurgie cervico-faciale de l'hôpital militaire Avicenne de Marrakech. L’âge moyen des patients était de 41 ans. Une prédominance masculine a été retrouvée. Le tableau clinique a été dominé par la tuméfaction sous mandibulaire. Tous les patients ont bénéficié d'une échographie cervicale. La tomodensitométrie cervicale a été réalisée chez 7 patients. La première étiologie était la sous maxillite chronique lithiasique dans 39,02% des cas. Le traitement était chirurgical dans tous les cas. En comparant les résultats avec ceux rapportés dans la littérature, nous allons discuter les différents aspects diagnostiques et thérapeutiques des étiologies les plus fréquentes. Les tuméfactions de la région sous mandibulaire sont fréquentes, nécessitant une démarche diagnostique rigoureuse et une prise en charge thérapeutique adaptée. PMID:25469195

  1. Changement climatique et domaines skiables: simulation en Savoie et Haute-Savoie à l’horizon 2015

    Directory of Open Access Journals (Sweden)

    Jean-Christophe Loubier

    2007-03-01

    Full Text Available Les domaines skiables et le changement climatique posent des questions importantes et nouvelles pour les espaces montagnards. Dans les hautes vallées où ces domaines sont souvent le moteur principal du développement local, on peut s'interroger sur la pérennité du modèle économique de l'or blanc à moyen terme quand les modèles de simulation du climat tablent sur une élévation de la température moyenne comprise entre 1,5° et 5° en 2100. Nous avons tenté de simuler les effets du changement climatique à l'horizon 2015, sur les domaines skiables de Savoie et Haute Savoie.

  2. Microbial investigations in Opalinus clay from Mont Terri and in Callovo-Oxfordian argillite from Meuse/Haute-Marne

    International Nuclear Information System (INIS)

    Poulain, S.

    2006-12-01

    The subject of this Ph.D. thesis deals with research achieved in the context of the Axis 2 of the law Bataille voted on December 30, 1991 about the possibility of building a deep geological repository for medium or high activity and long living nuclear waste. Nearby such a site, some microorganisms may influence the mobility of radionuclides coming from the waste canisters. This work consisted in looking for autochthonous microorganisms in the Opalinus clay formation from Mont Terri (Switzerland) and in the Callovo-Oxfordian argillite from Meuse/Haute-Marne (France). Microbial Investigations in these unknown unperturbed environments suggested very low microbial densities in the clayey sediments. However, new bacterial species could be isolated from those samples. In addition, a part of the allochthonous population, which has been introduced by air and human activity, could be identified in the Meuse/Haute-Marne underground research laboratory. (author)

  3. Gerbstoffe aus Potentilla officinalis wirken entzündungshemmend im UV-Erythem-Test und bei Anwendung auf atopischer Haut.

    Science.gov (United States)

    Hoffmann, Julia; Wölfle, Ute; Schempp, Christoph M; Casetti, Federica

    2016-09-01

    Das Rhizom von Potentilla officinalis (PO) ist reich an Gerbstoffen und wird traditionell zur äußerlichen Behandlung von Entzündungen der Haut und der Schleimhäute verwendet. Ziel der vorliegenden Arbeit war die Bestätigung der antiinflammatorischen Eigenschaften von PO mittels eines UV-Erythem-Tests und einer klinischen Anwendungsstudie bei atopischer Haut. Die antiinflammatorische Wirkung eines PO-Extrakts (standardisiert auf 2 % Trockensubstanz) wurde in einer prospektiven, randomisierten, placebokontrollierten Doppelblindstudie mit 40 gesunden Erwachsenen im UV-Erythem-Test im Vergleich zu 1 % Hydrocortisonacetat untersucht. Im Rahmen einer prospektiven nicht kontrollierten Studie wurde die Wirkung und Verträglichkeit der 2 % PO-Creme an zwölf Erwachsenen und zwölf Kindern mit atopischer Haut nach Anwendung über zwei Wochen in einem definierten Testareal anhand eines Teil-SCORAD untersucht. Zusätzlich wurde die Beeinflussung der Hautrötung im Testareal photometrisch gemessen. Im UV-Erythem-Test zeigte die PO-Creme eine signifikante Reduktion des Erythemindex im Vergleich zum Vehikel. Die antiinflammatorische Wirkung des Verums entsprach der der 1 % Hydrocortisonacetat-Creme. Die klinische Studie bei Atopikern zeigte eine signifikante Abnahme des Teil-SCORAD und des Erythems im Testareal. Es wurden keine Unverträglichkeitsreaktionen beobachtet. PO als 2%ige Zubereitung besitzt entzündungshemmende Eigenschaften und ist wirksam und gut verträglich auf atopischer Haut. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  4. Study of superconductors with high critical temperature by using the vibrating blade technique: anelastic properties, vortices dynamics; Etude des supraconducteurs a haute temperature critique par la technique de la lame vibrante: - proprietes anelastiques, - dynamique des vortex

    Energy Technology Data Exchange (ETDEWEB)

    De Brion, Sophie

    1991-10-04

    relaxation a ete attribuee aux mouvements de certains atomes d'oxygene des plans CuO. Sous champ magnetique (jusqu'a 8 Tesla), dans la gamme des temperatures inferieures a la temperature critique supraconductrice, nous avons mesure un cristal YBaCuO a deux concentrations d'oxygene differentes (O{sub 6,9} et O{sub 6,6}) ainsi que, a titre de comparaison, un cristal BiSrCaCuO (phase 2212). A basse temperature, nous avons observe la contribution des vortex pieges dans un etat irreversible. A plus haute temperature, cette contribution disparait definissant ainsi une ligne d'irreversibilite au dela de laquelle les vortex sont dans un regime reversible. Cette ligne a ete etudiee pour differentes orientations du champ magnetique par rapport aux plans CuO. Elle a ete interpretee en terme de depiegeage active thermiquement des vortex. (auteur)

  5. Measurement and analysis of high energy radiation through activation detectors. Application in dosimetry; Sur la mesure et l'analyse des rayonnements de haute energie par detecteurs a activation. Application a la dosimetrie

    Energy Technology Data Exchange (ETDEWEB)

    Sklavenitis, L. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-10-15

    detecteurs, une etude systematique des reactions nucleaires a tres haute energie est realisee ainsi que la mesure et le calcul des sections efficaces d'un certain nombre de reactions, comme la reaction {sup 11}B (p,n) {sup 11}C entre 150 et 3000 MeV et la reaction {sup 34}S (p,2pn) {sup 32}P entre 50 et 3000 MeV. La deuxieme partie est relative a l'application de l'analyse des fluences dans un fantome equivalent aux tissus irradie par des protons de 3 GeV. Cette analyse est suffisamment detaillee pour permettre de reconstituer les doses absorbees, les equivalents de dose et, sous reserve d'une meilleure connaissance de la dose due aux particules lourdes, les facteurs de qualite. Elle a permis, par ailleurs, de suivre l'evolution des differentes donnees dosimetriques en fonction de la profondeur dans le fantome et d'effectuer une verification des calculs deja faits par d'autres chercheurs. La comparaison des doses mesurees et des activites correspondantes de certains detecteurs a revele une qualite de ces derniers pouvant eventuellement conduire a la mise au point d'un detecteur qui donnerait directement la dose absorbee ou meme l'equivalent de dose par simple mesure de son activite. (auteur)

  6. Measurement and analysis of high energy radiation through activation detectors. Application in dosimetry; Sur la mesure et l'analyse des rayonnements de haute energie par detecteurs a activation. Application a la dosimetrie

    Energy Technology Data Exchange (ETDEWEB)

    Sklavenitis, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-10-15

    reactions nucleaires a tres haute energie est realisee ainsi que la mesure et le calcul des sections efficaces d'un certain nombre de reactions, comme la reaction {sup 11}B (p,n) {sup 11}C entre 150 et 3000 MeV et la reaction {sup 34}S (p,2pn) {sup 32}P entre 50 et 3000 MeV. La deuxieme partie est relative a l'application de l'analyse des fluences dans un fantome equivalent aux tissus irradie par des protons de 3 GeV. Cette analyse est suffisamment detaillee pour permettre de reconstituer les doses absorbees, les equivalents de dose et, sous reserve d'une meilleure connaissance de la dose due aux particules lourdes, les facteurs de qualite. Elle a permis, par ailleurs, de suivre l'evolution des differentes donnees dosimetriques en fonction de la profondeur dans le fantome et d'effectuer une verification des calculs deja faits par d'autres chercheurs. La comparaison des doses mesurees et des activites correspondantes de certains detecteurs a revele une qualite de ces derniers pouvant eventuellement conduire a la mise au point d'un detecteur qui donnerait directement la dose absorbee ou meme l'equivalent de dose par simple mesure de son activite. (auteur)

  7. Sigand : une application SIG sous androïd (tablette de la gestion des chantiers

    Directory of Open Access Journals (Sweden)

    CHAKIB SAFAR BATI

    2016-12-01

    Full Text Available L’introduction de données terrain pour les études environnementales ou de gestion de l’espace, régionales ou locales est une nécessité incontournable pour la validation des traitements et des interprétations mais aussi pour fournir des compléments d’informations aux divers travaux. Mais ce retour terrain est également de plus en plus demandé pour les gestionnaires de chantiers et de projets qui ont une exigence de contrôle ou de suivi et donc d’une information temps réel sur l’avancement des travaux, autrement pour introduire de nouvelles informations sur la base de données géoréférencées. Les avancées technologiques en matière de manipulation de l’information géographique (GPS, tablette graphique, téléphone portable, réalité augmentée permettent d’espérer la mise à dispositiondes professionnels, voire d’un plus large public, des outils adéquats pour de tels travaux. Actuellement, les outils d’élaboration, de gestion et d’exploitation des bases de données géographiques (solutions SIG ne sont pas encore complètement opérationnels en version « tablette » ; des applications telles que Qgis ou ArcGis sous Androïd attendent encore des développements. Nous présentons ici la première version d’une application SIG sous Androïd (disponible sur tablette pour la gestion en temps réel des chantiers qui permet de charger des couches vectorielles et de les mettre à jour sur le terrain en fonction de l’observation directe ; les couches (préalablement géoréférencées sont projetées sur des fonds cartographiques fournis par un serveur cartographique Google Maps (Route, Satellite, terrain; dans le cas d’absence de connexion internet, le fond cartographique est ramené d’un cache. Nous utilisons SpatialiteAndroïd pour le stockage et la manipulation des données géographiques. Le contrôleur de cartes Google Maps est employé pour afficher en mode cartographique les données stockées dans

  8. Investigation of persistent Multiplets at the EGS reservoir of Soultz-Sous-Forêts, France

    Science.gov (United States)

    Lengliné, O.; Cauchie, L.; Schmittbuhl, J.

    2017-12-01

    During the exploitation of geothermal reservoirs, abundant seismicity is generally observed, especially during phases of hydraulic stimulations. The induced seismicity at the Enhanced Geothermal System of Soultz-Sous-Forêts in France, has been thoroughly studied over the years of exploitation. The mechanism at its origin has been related to both fluid pressure increases during stimulation and aseismic creeping movements. The fluid-induced seismic events often exhibit a high degree of similarity and the mechanism at the origin of these repeated events is thought to be associated with slow slip process where asperities on the rupture zone act several times.To have a better understanding of the mechanisms associated with such events and on the damaged zones involved during the hydraulic stimulations, we investigate the behavior of the multiplets and their persistent nature over several water injection intervals. For this purpose, we analyzed large datasets recorded from a borehole seismic network for several water injection periods (1993, 2000). For each stimulation interval, thousands of events are recorded at depth. We detected the events using a STA/LTA approach and classified them into families of comparable waveforms using an approach based on cross-correlation analysis. Classification of the seismic events is then improved depending on their location within the multiplets. For this purpose, inter-event distances within multiplets are examined and determined from cross-correlation analysis between pairs of events. These distances are then compared to the source dimensions derived from the estimation of the corner frequencies estimation. The multiplets properties (location, events size) are then investigated within and over several hydraulic tests. Hopefully these steps will lead to increase the knowledge on the repetitive nature of these events and the investigation of their persistence will outline the heterogeneities of the structures (regional stress

  9. Off-axis Doas Measurements At Observatoire De Haute Provence During 2001

    Science.gov (United States)

    Roozendael, M. Van; de Mazière, M.; Fayt, C.; Hendrick, F.; Hermans, C.

    Since December 2000, a ground-based off-axis DOAS spectrometer has been operated by BIRA-IASB in the South of France at the Observatoire de Haute Provence (OHP, 44°N). The design of the instrument allows automated observations of the scattered light alternatively in the zenith direction and at 10° above the horizon (off-axis geometry). The spectrometer is polarised and follows the azimuth of the sun. Its temperature is regulated and it is equipped with a Princeton Instruments/ Hammamatsu cooled diode array detector. Observations are made every 5 minutes in the 320-390 nm range. The analysis of the spectra recorded between January and December 2001 demonstrates the sensitivity of the measurements to tropospheric contents of NO2, HCHO, O3 and BrO. Results show a large seasonality in the HCHO content with maximum values in summer. The tropospheric BrO column is found to be stable over the year in the range of approximately 1.5-2 x1013 molec/cm2, roughly consistent with GOME observations at Northern mid-latitudes. Large increases of the BrO concentration are observed in summer likely due to local pollution in the vicinity of the station.

  10. A heating experiment in the argillites in the Meuse/Haute-Marne underground research laboratory

    International Nuclear Information System (INIS)

    Wileveau, Yannick; Su, Kun; Ghoreychi, Mehdi

    2007-01-01

    A heating experiment named TER is being conducted with the objectives to identify the thermal properties, as well as to enhance the knowledge on THM processes in the Callovo-Oxfordian clay at the Meuse/Haute Marne Underground Research Laboratory (France). The in situ experiment has being switched on from early 2006. The heater, 3 m length, is designed to inject the power in the undisturbed zone at 6 m from the gallery wall. A heater packer is inflated in a metallic tubing. During the experiment, numerous sensors are emplaced in the surrounding rock and are experienced to monitor the evolution in temperature, pore-water pressure and deformation. The models and numerical codes applied should be validated by comparing the modeling results with the measurements. In parallel, some lab testing have been achieved in order to compare the results given with two different scales (cm up to meter scale). In this paper, we present a general description of the TER experiment with installation of the heater equipment and the surrounding instrumentation. Details of the in situ measurements of temperature, pore-pressure and strain evolutions are given for the several heating and cooling phases. The thermal conductivity and some predominant parameters in THM processes (as linear thermal expansion coefficient and permeability) will be discussed. (authors)

  11. Current and future activities of the Observatoire de Haute Provence in Education and Public Outreach

    Science.gov (United States)

    Boër, M.; Ducerf, D.

    The Haute Provence Observatory OHP is an observation station located 100km North of Marseille France It performs both astronomical observations and routine atmospheric measurements in the NDSC Network for Data on Stratospheric Changes and several other geophysics national and international networks The site offers also a program directed to the general public the teachers the pupils and the students at all levels In the past two years we reinforced these activities following few guidelines enhance the scientific diffusion activities towards the general public by presenting an exhibition a stronger program for the teachers and the implementation of a project oriented program for the high school and university students We participate also to a curriculum for planetarium attendants We are currently defining the general long term plan for the observatory including a strong EPO program taking advantages of the site visitors facilities guesthouse research group EPO personnel This program will be oriented to the general space and planetary sciences and is prepared in cooperation with both the academic and regional authorities

  12. A study on the dynamic behavior of the Meuse/Haute-Marne argillite

    Science.gov (United States)

    Cai, M.; Kaiser, P. K.; Suorineni, F.; Su, K.

    Excavation of underground tunnels can be conducted by tunnel boring machines (TBM) or drill-and-blast. TBMs cause minimum damage to excavation walls. Blasting effects on excavation walls depend on the care with which the blasting is executed. For blast-induced damage in excavation walls, two issues have to be addressed: rate of loss of confinement (rate of excavation) and dynamic loading from wave propagation that causes both intended and unintended damage. To address these two aspects, laboratory dynamic tests were conducted for the determination of the dynamic properties of the Meuse/Haute-Marne argillite. In the present study, 17 tensile (Brazilian) and 15 compression split Hopkinson pressure bar (SHPB) tests were conducted. The test revealed that the dynamic strengths of the argillite are strain rate dependent. The average dynamic increase factors (ratio of dynamic strength to static strength) for tensile and compressive strength are about 3.3 and 2.4, respectively. A high-speed video camera was used to visualize the initiation of failure and subsequent deformation of the specimens. The direct compression specimens were found to deform and fail uniformly around the circumference of the specimen, by a spalling process. The SHPB Brazilian tests indicated that failure occurred in tension along the line of load application. Radial fractures were also observed. The test results can be used for the development of a dynamic constitutive model for the argillite for the prediction of damage in underground excavation utilizing the drill-and blast method.

  13. Effets des rayonnements de haute energie sur le cristallin de la souris

    CERN Document Server

    Di Paola, M; Bianchi, M; Bianchi, M no 1; Baarli, J no 1; Di Paola, M no 1

    1973-01-01

    L'opacification du cristallin après irradiation par des neutrons et d'autres rayonnements ionisants a été largement étudiée, vu l'importance de telles recherches en radioprotection et la possibilité offerte par ce système d'analyser les effets produits par de petites doses de rayonnement. Les neutrons de haute énergie sont d'un intéret particulier pour la radioprotection près des accélérateurs et dans l'espace, mais jusqu'à présent les études ont été limitées aux neutrons d'énergie inférieur à 14 MeV. L'opacification du cristallin chez la souris, après irradiation par des neutrons de 400 MeV produits par le Synchro-Cyclotron du CERN, a été étudiée. Le valeurs d'E.B.R. ont été déterminées par comparaison avec des rayons X de 250 kV. Une breve discussion des résultats obtenus est inclue dans la présentation.

  14. Measurement, with steady pressure rise, of the permeability of a gas through a porous membrane; Mesure, en montee continue de pression, de la permeabilite d'un gaz a travers une membrane poreuse

    Energy Technology Data Exchange (ETDEWEB)

    Davion, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    This study concerns a device for following the variations in the permeability of a gas across a porous membrane as a function of the average pressure, increasing steadily, which is applied to the membrane: P-bar; from these variations is deduced a value of an equivalent pore radius. A constant gas flow is introduced into an enclosure separated into two compartments by the membrane; the simultaneous variations of the pressure in the enclosure and of the pressure difference {delta} P between the two compartments are followed. After a transient period, {delta} P is given by an asymptotic expansion as a function of a dimensionless variable, w, whose expression includes several parameters (ratio of the compartment volumes, physical properties of the gas, pore radius, value of {delta} P in the steady state) and the variable pressure P. When w is large compared to unity, condition which gives an upper limit to the flow for a given membrane, the expansion is practically equal to its first term; the changes in {delta} P and in the permeability are then inversely proportional. The perturbing influences of various secondary effects (e. g. changes in the enclosure temperature) on the pore radius measurement have been estimated. (author) [French] Cette etude concerne un dispositif permettant de suivre les variations de permeabilite d'un gaz a travers une membrane poreuse en fonction de la pression moyenne, continument croissante, appliquee a cette membrane: P-bar; de ces variations se deduit la valeur d'un rayon de pore equivalent. Un debit de gaz constant est introduit dans une enceinte separee par la membrane en deux compartiments, et l'on suit les variations simultanees de la pression dans l'enceinte et de la difference de pression entre ces compartiments, {delta} P. A l'issue d'un stade transitoire, {delta}P est donne par un developpement asymptotique en fonction d'une variable sans dimensions, w, dont l'expression groupe plusieurs parametres (rapport des volumes des

  15. A study of the diffusion mechanisms in amorphous metallic alloys: diffusion and diffusion under high pressure in an amorphous NiZr alloy; Contribution a l`etude des mecanismes de transport dans les materiaux metalliques amorphes: diffusion et diffusion sous pression dans NiZr amorphe

    Energy Technology Data Exchange (ETDEWEB)

    Grandjean, A.

    1996-03-01

    The aim of this work is a better understanding of the diffusion mechanism in amorphous metallic alloys. Then interdiffusion and hafnium diffusion in amorphous NiZr alloy have been studied. Samples used are made by sputtering co-deposition under vacuum and are well relaxed before the diffusion measurements. The time evolution of resistivity during annealing due to the decay of a composition modulated film has been measured and from this change in resistivity interdiffusion coefficients have been determined. Dependence of Hf diffusion on temperature and pressure has been studied using (SIMS). In this two cases, the diffusion process obeys an Arrhenius law and gives an activation energy of 1.33 eV for interdiffusion, and 0.76 eV for Hf diffusion. An effect of pressure on Hf diffusion has been found leading to an activation volume of 8.5 angstrom{sup 3}. Thanks to these results, two approaches of the diffusion mechanisms in these systems have been proposed. The first comes from a comparison with the diffusion mechanisms in crystalline metals, that is to say by point defects. The second is an hypothesis of collective motions in these non crystalline alloys. (author).

  16. Study of the retention of radionuclides by ion-exchange resins contained in the circuits of a Pressurized Water Reactor; Etude de la retention des radionucleides dans les resines echangeuses d'ions des circuits d'une centrale nucleaire a eau sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Gressier, F.

    2008-11-15

    Physico-chemical quality of fluids in nuclear power plant circuits must be maintained in order to limit contamination and dose rate especially when the shutdown takes place. Nevertheless, an optimum between diminishing liquid waste and limiting solid waste production has to be reached, but at affordable costs. Ion-exchange resins of purification circuits are used to fulfill this goal. In this work, different resin types have been characterized (exchange capacity, water and electrolyte sorption) and their selectivity towards Co{sup 2+}, Ni{sup 2+}, Cs{sup +} and Li{sup +} cations have been studied. We have shown that the two cation-exchange resins selectivity varies according to the nature and concentrations of their counter-ions. Moreover, flow rate (and thus hydro-kinetics) impact on species retention in a column has been characterized: the more the flow rate, the more the ionic leakage (output concentration divided by input concentration) is fast and the more the output concentration front is spread. A literature revue has enabled to put in light advantages and drawbacks of the models of interest to simulate operations of ion-exchange resins. Thus, the pure end-members mixing model associated to a non-ideality description of the resin phase based on the regular solutions model has been retained for modelling ion-exchange equilibrium. Ion-exchange kinetics has been described by mass transfer coefficients. Using the experimental results to determine model parameters, these last ones have been implemented in a speciation code CHESS, coupled with a hydrodynamic code in HYTEC. On the one hand, equilibrium experiments of ion retention have been simulated and, on the other hand, column retention tests have been modelled. Finally, selectivity variations and hydro-kinetics impacts have been simulated on some test cases so as to demonstrate the importance of taking these into account when simulating ion-exchange resins operations. (author)

  17. Contribution to multi-agents modeling of the operation of industrial processes: application to the operation of a pressurized water reactor under accidental situation; Contribution a la modelisation multi-agents de la conduite de processus industriels: application a la conduite en situation accidentelle d`un reacteur nucleaire a eau sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Elias, P.

    1996-11-13

    This work is related to the CEA `Escrime` project which concerns the reliability and functioning safety of nuclear reactors, and in particular the operation and supervision of nuclear installations. Its aim is the analysis and the formalizing of PWRs operation in order to define the collaboration and optimum sharing of tasks between human operators and automatized systems for an improved functioning safety. Chapter 1 describes the operation of nuclear reactors and the instrumentation and control activities. It focusses on the weaknesses of actual automatized systems and examines the interest of the multi-agents approach to build an improved automatized system. Chapter 2 presents the actual state of the art about multi-agent systems and about their application to reactor operation. Chapter 3 is devoted to the definition of the conceptual model of automatized systems developed in this work (distribution of operation activities, competition between agents, hierarchy, arbitration). Chapter 4 describes the computer model of the essential operating system elaborated according to the conceptual model defined above. Modeling is performed using Spirit and an application is described in chapter 5. (J.S.). 58 refs.

  18. Physical and numerical modelling of corium spreading with solidification in safety studies of pressurized water reactors; Modelisation physique et numerique de l`etalement d`un fluide avec solidification dans le cadre des etudes de surete pour les reacteurs eau sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Eberle Patrick [Service d`Etude et de Modelisation en Thermohydrolique, CEA/DRN/DTP/SMTH, Grenoble (France)]|[Grenoble-1 Univ., 74 Annecy (France)

    1997-12-12

    In the frame of severe accidents of nuclear pressurized water reactor, it is important to understand and to model phenomena of corium spreading with solidification. The first part of the study describes experiments with simulating materials as well as simple models of the literature. We deduce a model where the equations of conservation are averaged over the volume. This model gives interesting results for continuous spreading but it is not convenient for discontinuous phenomena. A more precise model is then necessary. In the second part of this study, we present a complete model from which the basic idea is to average the conservation equations over the fluid height, supposing the characteristic fluid thickness is small in comparison with the characteristic spreading length. This model describes the thermalhydraulic aspects of the spreading as well as the mechanical behaviour of the upper crust. The liquid phases are supposed to be stratified and have a Newtonian fluid behaviour. The dynamical crust model takes into account a non-linear behaviour law. This law depends on the deformation tensor whereas the liquid behaviour low, depends on the rate of deformation tensor, so it is necessary to link this two notions by supplementary equations. The operation of averaging the equations gives terms at the interfaces which must be determined by constitutive laws. We deduce laws by fixing the velocity and temperature profile in the fluid height. The previous system of equations is discretized by finite volumes and semi-implicit methods. The discretized models are included in the specific code THEMA. The results of the model show good agreement with available experimental results. (author) 9 refs., 45 figs., 42 tabs.

  19. Modelling of the mechanical behaviour of a material containing spherical cavities under pressure; example of the aging of a metal tritide; Modelisation du comportement mecanique d'un materiau contenant des cavites sous pression; cas du vieillissement d'un tritiure metallique

    Energy Technology Data Exchange (ETDEWEB)

    Chalon, F

    2001-07-01

    The study aims at modeling the mechanical behaviour of a material containing spherical cavities under pressure (bubbles) of nano-metric size. This work deals with research on tritium storage in metals. In this way, metal tritides are obtained. During time, helium is generated by tritium decay. Helium appears as a gas, which forms bubbles in the metal tritide. These bubbles subsequently cause damage within the material. The purpose of this work was therefore the following: (i) to determine the overall elastic moduli as a function of the volume fraction of cavities. thus providing an information about material damage, (ii) to analyze the macroscopic inflation of the material in order to solve storage problems, (iii) to determine the local stress fields for predicting the evolutions of the bubbles and the matrix. With the help of the scale change methods (homogenization) the macroscopic mechanical properties of the material can be determined as a function of its morphology on a microscopic scale. Thus the damage of the material can be estimated by experimental measurements of the global elastic moduli. Homogenization also allows the elastic inflation to be evaluated as well as the effects of cavity clusters and local variations of the elastic moduli. The internal stresses are determined on the microscopic scale (cavity scale). Two analytical methods (Eshelby-Mura and Legendre polynomials) and one numerical approach (Abaqus) are used to obtain more information and a best description of the material. It is shown that bubbles should attain the same size and same pressure and the plastic strain zones are determined. (author)

  20. Study of hydrogen migration produced during the corrosion of PWR reactors fuel cans in zircaloy 4 and zirconia; Etude du transport de l`hydrogene produit lors de la corrosion des gaines d`elements combustibles des reacteurs a eau sous pression dans la zircone et le zircaloy-4

    Energy Technology Data Exchange (ETDEWEB)

    Aufore, L

    1997-12-12

    The corrosion of Zircaloy-4-claddings by water from the primary circuit of nuclear power plant goes hand in hand with the release of hydrogen which penetrates the oxide and then the metal. This work focuses on the mechanisms of hydrogen transport in oxide and in metal. Hydrogen transport in oxide is studied on the basis of corrosion tests performed in the autoclave at 360 deg C. These tests are performed on Zircaloy-4 claddings under different chemical conditions (pure water, and pure water with lithium hydroxide). The distribution of hydrogen in oxide film is measured by SIMS. Hydrogen profiles in the oxide are dependent on the oxide microstructure and vary with oxidation time. These observations are confirmed by experiments in which some samples, previously oxidized in the autoclave, are immersed in heavy water. In the oxide layer, two zones are observed: one external porous zone and one internal dense zone. Deuterium diffusion coefficients in dense oxide are determined using SIMS profiles and Fischer diffusion model. Hydrogen transport in metal is also studied by means of gas-phase permeation experiments. These are set up at different temperature (400-500 deg. C) and under different hydrogen pressures and make it possible to determine the hydrogen diffusion coefficients in a Zircaloy-4 cladding under experimental conditions. All these results lead us to discuss of hydrogen transport evolution in cladding during oxidation. A model taking into account hydrogen transport in oxide and in metal, and the hydrides precipitations is proposed. (author) 110 refs.

  1. Characterization through nano indentation technique of mechanical properties of an aluminium alloy welded zone for hydrogen storage; Apport de la nanoindentation pour la caracterisation d'un cordon de soudure par faisceau d'electrons d'un reservoir d'hydrogene sous pression en alliage d'aluminium

    Energy Technology Data Exchange (ETDEWEB)

    Delobelle, P.; Perreux, D.; Russo, C. [Universite de Franche-Comte, Institut FEMTO-ST, UMR 6174, Depart. LMARC, 25 - Besancon (France); Meunier, E. [CEA Valduc (DRMN/SMCM/LCSi), 21 - Is-sur-Tille (France); Decamps, B. [Laboratoire de Chimie Metallurgique des Terres Rares, UPR 209, 94 - Vitry-Thiais, (France)

    2008-07-01

    In this study we use the nano indentation technique which is a powerful tool to characterise the mechanical properties of a welded bond. The Berkovich indentation has the advantage to test small material volumes compared to the conventional tensile tests. The welded process with electrons beam of hydrogen vessels induces different regions and the aim of this study is to characterize the differences of the mechanical properties of the different zones of the weld. To identify the stress-strain curves of the tested material, F.E. inverse method has been used. After treatment, for one pass, the hardness of the melted zone is greater than those of the base material and for the two passes, the hardness is still lower than those of the base material. The interface zones present a hardness which is always higher than those of the weld. A relation of the Hall-Petch type which correlates the evolution of the hardness with the zinc concentration and the grain size has been proposed. Moreover a relation between the normalized hardness and the hydrogen concentration CH has been found. The parameters of the stress-strain curves of the four regions; base material, interface, one and two passes melted zones, have been deduced. The identified laws are used in a F.E. model of a welded sphere to model its radial deformation under internal pressure loading. (authors)

  2. From fundamental mode to the PWR type reactors blow off: physical analysis and contribution to the qualification of calculation tools; Du mode fondamental a la vidange des reacteurs a eau sous pression: analyse physique et contribution a la qualification des outils de calcul

    Energy Technology Data Exchange (ETDEWEB)

    Maghnouj, A

    1996-01-18

    The work reported in this thesis centres on the resolution of reactor physics problems posed by the use in pressurised water reactors of fuel assemblies containing mixed uranium-plutonium oxide fuel (MOX). The work is essentially dependent on the results of the EPICURE experimental programme carried out between 1988 and 1994 in the reactor EOLE at the Cadarache Research Centre of the CEA. Our contribution to the validation of the computer program APOLLO2 and of its nuclear data library CEA93 shows that this code system satisfactorily calculates the neutronic characteristics of PWR cores. The validation of the experiments has provided useful information concerning the modifications required to be made to the library CEA93, which is based on the basic library of evaluated nuclear data, JEF2. This approach should now be extended to a wider basis of reactor experimental data. The studies of methods for calculating coolant voiding coefficients has made it possible to select suitable methods based on the available deterministic methods of transport theory in 2 ad 3 dimensions. These schemes have given results in satisfactory agreement with the measurements made in EPICURE programme for both local and total coolant voiding. It would now be worth while to validate the chosen methods by comparisons with calculations made using continuous energy Monte Carlo methods. (author)

  3. Neutron scattering techniques for betaine calcium chloride dihydrate under applied external field (temperature, electric field and hydrostatic pressure); Etude par diffusion de neutrons du chlorure de calcium et de betaine dihydrate sous champ externe applique (temperature, champ electrique et pression hydrostatique)

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, O

    1997-11-17

    We have studied with neutron scattering techniques betaine calcium chloride dihydrate (BCCD), a dielectric aperiodic crystal which displays a Devil`s staircase type phase diagram made up of several incommensurate and commensurate phases, having a range of stability very sensitive to temperature, electric field and hydrostatic pressure. We have measured a global hysteresis of {delta}(T) of about 2-3 K in the two incommensurate phases. A structural study of the modulated commensurate phases 1/4 and 1/5 allows us to evidence that the atomic modulation functions are anharmonic. The relevance of the modelization of the modulated structure by polar Ising pseudo-spins is then directly established. On the basis of group theory calculation in the four dimensional super-space, we interpret this anharmonic modulation as a soliton regime with respect to the lowest-temperature non modulated ferroelectric phase. The continuous character of the transition to the lowest-temperature non modulated phase and the diffuse scattering observed in this phase are accounted for the presence of ferroelectric domains separated by discommensurations. Furthermore, we have shown that X-rays induce in BCCD a strong variation with time of irradiation of the intensity of satellite peaks, and more specifically for third order ones. This is why the `X-rays` structural model is found more harmonic than the `neutron` one. Under electric field applied along the vector b axis, we confirm that commensurate phases with {delta} = even/odd are favoured and hence are polar along this direction. We have evidenced at 10 kV / cm two new higher order commensurate phases in the phase INC2, corroborating the idea of a `complete` Devil`s air-case phase diagram. A phenomenon of generalized coexistence of phases occurs above 5 kV / cm. We have characterized at high field phase transitions between `coexisting` phases, which are distinguishable from classical lock-in transitions. Under hydrostatic pressure, our results contradict the pressure - temperature phase diagrams previously determined or extrapolated above room-temperature. (author) 122 refs.

  4. Analysis of a weld of an hydrogen tank under pressure: contribution of the nano-indentation for the characterization; Analyse d'une soudure d'un reservoir d'hydrogene sous pression: apport de la nanoindentation pour la caracterisation

    Energy Technology Data Exchange (ETDEWEB)

    Russo, C.; Delobelle, P.; Perreux, D. [Laboratoire de Mecanique Appliquee R. Chaleat (LMARC), Institut FEMTO-ST, UFC and CNRS, 25 - Besancon (France); Russo, C.; Munier, E. [CEA Valduc, 21 - Is-sur-Tille (France); Decamps, B. [Institut de Chimie et des Materiaux Paris-Est vient, CNRS, CMTR-ICMPE, 94 - Thiais (France)

    2007-07-01

    This work deals with the size of an hydrogen spherical tank under pressure, composed of two half shell in aluminium alloy AZ5G machined in a forged bar and welded by electrons beam by a circumference. In this work, it is shown what the nano-indentation test can bring here. The influence of the tempering heat treatment after welding, the grains diameter and the loss in alloy elements (Zn and Mg) on the local mechanical properties of the weld bead has been revealed. In the same way, a hardening of the alloy due to the hydrogen penetration and leading to an increase of the dislocations density is observed. (O.M.)

  5. Faulting mechanisms and stress regime at the European HDR site of Soultz-sous-Forets, France

    International Nuclear Information System (INIS)

    Cuenot, Nicolas; Charlety, Jean; Haessler, Henri; Dorbath, Louis

    2006-01-01

    The state of stress and its implications for shear on fault planes during fluid injection are crucial issues for the HDR (Hot Dry Rock) or EGS (Enhanced or Engineered Geothermal System) concept. This is especially true for hydraulic stimulation experiments, aimed at enhancing the connectivity of a borehole to the natural fracture network, since they tend to induce the shearing of fractures, which is controlled by the local stress regime. During the 2000 and 2003 stimulation tests at Soultz-sous-Forets, France, about 10,000 microearthquakes were located with a surface seismological network. Hundreds of double-couple (DC) focal mechanisms were automatically determined from first-motion polarities using the FPFIT program [Reasenberg, P.A., Oppenheimer, D., 1985. FPFIT, FPPLOT and FPPAGE: Fortran computer programs for calculating and displaying earthquake fault-plane solutions. US Geological Survey Open-File Report 85-739, 25 pp.]. The majority of these mechanisms indicate normal-faulting movement with a more or less pronounced strike-slip component. Some quasi-pure strike-slip events also occurred, especially in the deeper part of the stimulated rock volume, at more than 5 km depth. Although we found a double-couple solution for all events, we tried to observe and quantify the proportion of the non-double-couple (NDC) component in the seismic moment tensor for several microseisms from the 2003 data. The study shows that the NDC is higher for the events in the vicinity of the injection well than for the events far from the well. We used the method of Rivera and Cisternas [Rivera, L., Cisternas, A., 1990. Stress tensor and fault-plane solutions for a population of earthquakes. Bull. Seismol. Soc. Am. 80, 600-614.] to perform the inversion of the deviatoric part of the stress tensor from P-wave polarities. This method was applied to different datasets from the 2000 test, taken from the shallower and deeper parts of the stimulated region. The results show a stable

  6. Faulting mechanisms and stress regime at the European HDR site of Soultz-sous-Forets, France

    Energy Technology Data Exchange (ETDEWEB)

    Cuenot, Nicolas; Charlety, Jean; Haessler, Henri [Institut de Physique du Globe de Strasbourg, Ecole et Observatoire des Sciences de la Terre (IPGS-EOST), 5 rue Rene Descartes, 67084 Strasbourg Cedex (France); Dorbath, Louis [Institut de Physique du Globe de Strasbourg, Ecole et Observatoire des Sciences de la Terre (IPGS-EOST), 5 rue Rene Descartes, 67084 Strasbourg Cedex (France); Institut de Recherche pour le Developpement, Laboratoire des Mecanismes et Transferts en Geologie (IRD, LMTG), 14 Avenue Edouard Belin, 31400 Toulouse (France)

    2006-10-15

    The state of stress and its implications for shear on fault planes during fluid injection are crucial issues for the HDR (Hot Dry Rock) or EGS (Enhanced or Engineered Geothermal System) concept. This is especially true for hydraulic stimulation experiments, aimed at enhancing the connectivity of a borehole to the natural fracture network, since they tend to induce the shearing of fractures, which is controlled by the local stress regime. During the 2000 and 2003 stimulation tests at Soultz-sous-Forets, France, about 10,000 microearthquakes were located with a surface seismological network. Hundreds of double-couple (DC) focal mechanisms were automatically determined from first-motion polarities using the FPFIT program [Reasenberg, P.A., Oppenheimer, D., 1985. FPFIT, FPPLOT and FPPAGE: Fortran computer programs for calculating and displaying earthquake fault-plane solutions. US Geological Survey Open-File Report 85-739, 25 pp.]. The majority of these mechanisms indicate normal-faulting movement with a more or less pronounced strike-slip component. Some quasi-pure strike-slip events also occurred, especially in the deeper part of the stimulated rock volume, at more than 5 km depth. Although we found a double-couple solution for all events, we tried to observe and quantify the proportion of the non-double-couple (NDC) component in the seismic moment tensor for several microseisms from the 2003 data. The study shows that the NDC is higher for the events in the vicinity of the injection well than for the events far from the well. We used the method of Rivera and Cisternas [Rivera, L., Cisternas, A., 1990. Stress tensor and fault-plane solutions for a population of earthquakes. Bull. Seismol. Soc. Am. 80, 600-614.] to perform the inversion of the deviatoric part of the stress tensor from P-wave polarities. This method was applied to different datasets from the 2000 test, taken from the shallower and deeper parts of the stimulated region. The results show a stable

  7. Nouveaux supraconducteurs à haute température critique à base de mercure

    Science.gov (United States)

    Michel, C.; Hervieu, M.; Martin, C.; Maignan, A.; Pelloquin, D.; Goutenoire, F.; Huvé, M.; Raveau, B.

    1994-11-01

    Structural and superconducting properties of new cations substituted mercury based oxides are described. They are mainly characterized by [ Hg{1-x}MxOδ] infty monolayers, however a compound with doubled [ Hg{1-x}MxOδ] infty layer is described for the first time. Critical temperatures vary in a large range 0leqslant T_cleqslant 130 K, but they are lower than those of related to pure mercury oxides. The influence of annealings in various atmospheres upon T_c is discussed. Les caractéristiques structurales et supraconductrices de nouveaux oxydes à base de mercure, dans lesquels le mercure est partiellement remplacé par un autre cation, sont décrites. Dans la majorité des cas, ces oxydes sont caractérisés par une monocouche [ Hg{1-x}MxOδ] infty ; cependant, pour la première fois un composé contenant une double couche majoritaire en mercure est isolé. Les températures critiques varient dans un large domaine (0-130 K) mais restent inférieures à celles des oxydes parents ll tout mercure gg. L'influence des recuits sous des atmosphères diverses est discutée.

  8. Traduction audiovisuelle : quand le sous-titrage à destination des personnes sourdes et malentendantes se rencontrent dans le film "Le Prénom"

    OpenAIRE

    Horii, Anaïk

    2015-01-01

    La traduction audiovisuelle est riche en méthodes de traduction : doublage, voice over, sur-titrage, audiodescription, etc. Ce mémoire se concentre sur la méthode du sous-titrage ainsi que sur celle du sous-titrage à destination des personnes sourdes et malentendantes. Le but était de comparer ces deux méthodes de traduction interlinguistique (dans les deux cas pour un public germanophone) en s'attardant sur les références culturelles ainsi que sur les langages populaire, familier et argotiqu...

  9. Influence of Sous Vide and water immersion processing on polyacetylene content and instrumental color of parsnip (Pastinaca sativa) disks.

    Science.gov (United States)

    Rawson, Ashish; Koidis, Anastasios; Rai, Dilip K; Tuohy, Maria; Brunton, Nigel

    2010-07-14

    The effect of blanching (95 +/- 3 degrees C) followed by sous vide (SV) processing (90 degrees C for 10 min) on levels of two polyacetylenes in parsnip disks immediately after processing and during chill storage was studied and compared with the effect of water immersion (WI) processing (70 degrees C for 2 min.). Blanching had the greatest influence on the retention of polyacetylenes in sous vide processed parsnip disks resulting in significant decreases of 24.5 and 24% of falcarinol (1) and falcarindiol (2) respectively (p processing did not result in additional significant losses in polyacetylenes compared to blanched samples. Subsequent anaerobic storage of SV processed samples resulted in a significant decrease in 1 levels (p levels was observed (p > 0.05). 1 levels in WI processed samples were significantly higher than in SV samples (p processing with losses of up to 70% occurring after 5 days storage. 1 type polyacetylene undergoes degradation such as oxidation, dehydrogenation when thermally treated forming oxidized form of 1 type molecules, in this case falcarindione, dehydrofalcarinol, dehydrofalcarinone. Thermal processing had a significant effect on instrumental color of parsnip samples compared to minimally processed in both SV and WI processed samples resulting in parsnip disks becoming darker, yellower and browner following processing and storage.

  10. Les monticules micritiques sinemuriens sur la transversale de Midelt-Errachidia (Haut Atlas Central, Maroc

    Directory of Open Access Journals (Sweden)

    Taj Eddine, K.

    2004-12-01

    Full Text Available In the central High Atlas of Morocco, the Liassic series present different mud-moundtype carbonate buildups, well developed in the Midelt area, towards the boundary between the Lower and the Upper Sinemurian. Near Foum Tillicht, these structures show a real evolution within the Upper Sinemunan interval, from simple small-scale bodies at the base, up to big and complex forms at the top. Their sedimentological and palaeontological features indicate microbolites and sponge buildings developed in deep and open marine conditions, within the subphotic zone, at the lower part of the storm wave interval. These buildups are closely linked to tectonic processes as they grow on the normal synsedimentary faults which affected the central atlasic area during the Lower Liassic period, leading to the breakup of the Early Sinemurian carbonate platform and the induced installation of the Upper Sinemurian subsiding basin. Silting by hemipelagic sediments led to death of buildings. Similar palaeogeographic changes and geodynamic evolution have been recently described from different structures in North Africa, Western Europe and North America.Le Lías du Haut Atlas central marocain présente diverses"bioconstructions carbonatées de type Mud-mound bien développées au passage Sinémurien inférieur- Sinémurien supérieur au Sud de Midelt. Ces structures évoluent très localement, a Foum Tillicht, dans tout l’intervalle Sinémurien supérieur. Elles présentent des formes et des tailles respectivement simples et réduites a la base de la série et deviennent complexes et de grande dimension au sommet. Leurs caractéristiques sédimentologiques et paléontologiques montrent qu’il s’agit de constructions a microbolites et a spongiaires développées dans un milieu marin ouvert et profond, dans la zone subphotique, a la partie inférieure de la zone d’action des vagues de tempête. L’apparition et le grand développement des bioconstructions boueuses sin

  11. The Crouzille (Haute-Vienne, France) uranium ores. Half a century of human and industrial adventure in Limousin

    International Nuclear Information System (INIS)

    Bavoux, B.; Guiollard, P.C.

    1998-01-01

    The 16 uranium deposits of the Crouzille (Haute-Vienne, France) have produced 25000 tons of uranium between 1950 and 1995. The uranium content of the ores ranges from 1 to 10/1000. The main production came from the underground exploitation up to 300 m of depth. This book presents the historical aspects of this industrial and human epopee and describes with details the underground exploitation of the ore, its processing and the rehabilitation of the site after the mines have closed down. (J.S.)

  12. Représentation haute résolution du système de mousson ouest ...

    African Journals Online (AJOL)

    Le RegCM3 est piloté à ses frontières latérales et initialisé par deux jeux de données : la dernière version de réanalyses haute résolution produite par le centre européen pour les prévisions météorologiques à moyen terme (CEPMMT) et les sorties du modèle de circulation générale couplé Océan-Atmosphère ECHAM5.

  13. Une autre nature en ville: l'aménagement de la boucle nord des Hauts-de-Seine

    Directory of Open Access Journals (Sweden)

    Catherine Carré

    2005-07-01

    Full Text Available Confined to parks and forests, nature in French urban areas has been used as an instrument for urban planners and developers. Recent urban projects have sought to give natural systems a fuller role in territorial development. This new function can be considered a radically new approach. At the same time, current redevelopment projects must also integrate existing facilities. The redevelopment of the banks of the Seine by the Hauts-de-Seine council is a good example of this new role that nature can play in urban revitalisation. Maps show the constraints and issues that must be taken into account.

  14. TRANSFORMATION ISOTHERME D'UN ACIER A HAUTE RESISTANCE 40 CDV 13

    Directory of Open Access Journals (Sweden)

    A BOUTEFNOUCHET

    2001-06-01

    Full Text Available L'étude dilatométrique du comportement de l'austénite en condition isotherme d'un acier ternaire, à haute résistance mécanique de nuance 40 CDV 13, nous a permis de tracer son diagramme TTT. L'austénitisation a été réalisée pendant 10 minutes à  qg = 950°C (utilisée dans  l'industrie. Les températures de maintien sont comprises entre Ac1 = 810°C et Ms  = 310°C. Dans ce diagramme TTT, on distingue deux domaines de transformation isotherme de l'austénite. Le domaine I (625°C £  qiso < Ac1 = 810°C dans lequel l'austénite se transforme en ferrite et en perlite, et le domaine II (325°C  £  qiso £ 475°C où l'austénite se transforme en bainite ou en ferrite probainitique. Ces transformations sont précédées pour toutes les températures de maintien isotherme d'une précipitation de carbures. En outre, ces deux domaines de transformation de l'austénite sont séparés par une large zone de stabilité de l'austénite comprise entre 500°C et 600°C. L'analyse approfondie des courbes dilatométriques enregistrées durant le maintien isotherme et le refroidissement final jusqu'à l'ambiante, nous a permis de déterminer qualitativement et quantitativement les phase mises en jeu par ces transformations isothermes de l'austénite.

  15. Les Brulures Electriques par Haut Voltage - A Propos de 10 Cas

    Science.gov (United States)

    Belmir, R.; Fejjal, N.; El Omari, M.; El Mazouz, S.; Gharib, N.; Abassi, A.; Belmahi, A.

    2008-01-01

    Summary Les accidents électriques par haute tension (AEHT) provoquent des brûlures profondes par effet Joule le long des axes vasculo-nerveux entre les points d'entrée et de sortie, qui sont le siège de lésions délabrantes. Les Auteurs rapportent une série de dix cas d'AEHT admis au service de chirurgie réparatrice et de brûlés de l'Hôpital Ibn Sina de Rabat à travers laquelle ils étudient les caractéristiques épidémiologiques, cliniques et thérapeutiques. Tous les patients étaient des adultes de sexe masculin dont l'âge moyen était de 31 ans. Dans 70% des cas, ces brûlures étaient secondaires à un contact avec les distributeurs d'électricité avec une surface brûlée inférieure à 20%. Le traitement des lésions électrothermiques a nécessité des interventions itératives avec amputation des segments de membres nécrosés dans 70% des cas, dont les suites étaient marquées par des séquelles fonctionnelles invalidantes. La prévention des AEHT, en particulier pour les accidents du travail au sein des professions exposées, reste fondamentale. PMID:21991124

  16. Self-ignition and oxidation of various hydrocarbons between 600 and 1000 K at high pressure: experimental study with fast compression machine and modeling; Autoinflammation et oxydation de divers hydrocarbures entre 600 et 1000 K a haute pression: etude experimentale en machine a compression rapide et modelisation

    Energy Technology Data Exchange (ETDEWEB)

    Ribaucour, M.

    2002-12-01

    Low- and intermediate-temperature oxidation and self-ignition of hydrocarbons play a major role in spark ignition, diesel and HCCI (homogenous charge compression ignition) engines. A deep understanding of the chemistry linked with both phenomena is necessary to improve the engines efficiency and to reduce the formation of pollutants. This document treats of works about the self-ignition and oxidation at high pressure of various hydrocarbons between 600 and 1000 deg. K. The experimental tool used is a fast compression machine fitted with a fast sampling system for the measurement of self-ignition delays and of the concentrations of intermediate oxidation products. The advantages and limitations of this tool are discussed. The self-ignition of various hydrocarbons is compared using pre-defined data which characterize the phenomenologies like cold flames, negative temperature coefficients and self-ignition limits. The hydrocarbons considered are pure or binary mixtures of alkanes, pent-1-ene and n-butyl-benzene. The development of high pressure oxidation reaction schemes of alkanes between 600 and 1000 deg. K is described. It is directly based on the analysis of intermediate oxidation products. This methodology is also applied to pent-1-ene and n-butyl-benzene. The construction of detailed thermo-kinetic models of oxidation and the modeling of phenomena are made for n-butane, n-heptane, for the 3 pentane isomers, for pent-1-ene and n-butyl-benzene. Finally, the perspectives of future works are evoked. They concern new modeling and new methodologies to be applied in more predictive thermo-kinetic models and the reduction of detailed models in order to include them inside fluid dynamics codes. (J.S.)

  17. Study of air entrainment in high pressure spray: optics diagnostics and application to the Diesel injection; Etude de l'entrainement d'air dans un spray haute pression: diagnostics optiques et application a l'injection diesel

    Energy Technology Data Exchange (ETDEWEB)

    Arbeau, A.

    2004-12-15

    The actual development of the engine must reply to a will of fuel consumption reduction and to norms more and more strict concerning the pollutant emissions. Although the Diesel engines are efficient, the NO{sub x} and particle emissions mainly come from the existence of wealthy fuel zone preventing an optimal combustion. Therefore, the air / fuel mixing preparation, highly controlled by the air entrainment in spray, is essential. In this context, we have developed metrological tools in order to analyse the air entrainment mechanism in a dense spray. The Particle Image Velocimetry (PIV) technique is first applied to a conical spray with an injection pressure less than 100 bars to study the air entrainment in spray. A transfer of the methodologies allows then the characterisation and the understanding of the air entrainment mechanism in high pressure full spray (injection pressure less than 1600 bars) type Diesel one. The influence of injection parameters (injection pressure and back pressure) on the mixing rate is studied. The increase of the injection pressure from 800 to 1600 bars implies an increase of the mixing rate of 60 %. Moreover, the thermodynamic conditions of the ambient air, simulated by the chamber back pressure, widely favours the mixing rate. Actually, this latter increases of 350 % when the chamber back pressure varies from 1 to 7 bars. The experimental results do not follow classical laws of air entrainment in one-phase flow jet with variable density, but are in good agreement with an integral model for air entrainment in an axisymmetric full spray. Finally, the Fluorescence Particle Image Velocimetry (FPIV) is introduced in order to extend the PIV application field in dense two-phase flows. (author)

  18. Phenomenologie et caractérisation des supraconducteurs à haute T_c

    Science.gov (United States)

    Peyral, P.; Lebeau, C.; Rosenblatt, J.; Burin, J. P.; Raboutou, A.; Pena, Q.; Perrin, C.

    1991-11-01

    Transport properties of high T_c superconductors depend on the microscopic structure of the ideal material and on the mesoscopic characteristics of each sample. From an experimental point of view it is essential to separate their efrects. This can be done by describing quantitatively the resistive transition in zero field as a two-step process : a superconducting intragranular transition and an intergranular coherence transition. Well-known theories of critical fluctuations and Gaussian fluctuations allow us to obtain important characteristic parameters of the intragranular material such as the critical temperature, the normal resistivity and the width of the critical region. Les propriétés de transport des supraconducteurs dépendent à la fois de la structure microscopique du matériau idéal et des caractéristiques mésoscopiques (la granularité) de chaque échantillon. Du point de vue expérimental il est essentiel de pouvoir séparer leurs effet respectifs. Nous parvenons à cette séparation en décrivant quantitativement la transition résistive sous champ nul en deux étapes: supraconductrice intragranulaire et cohérente intergranulaire. Des théories connues des fluctuations critiques et gaussiennes nous permettent alors d'obtenir des paramètres importants pour la caractérisation du matériau intragranulaire, comme sa température critique, sa résistivité normale et la largeur de sa région critique.

  19. Determination of the Quality and Shelf Life of Sous Vide Cooked Turkey Cutlet Stored at 4 and 12ºC

    Directory of Open Access Journals (Sweden)

    IT Akoğlu

    Full Text Available ABSTRACT The aim of this study was to determine the quality and shelf life of sous vide turkey cutlet stored at 4 and 12ºC. Samples were packaged under vacuum into polyamide-polypropylene pouches, cooked using sous vide technology (65ºC/40 min, chilled at 3ºC and stored at 4 and 12ºC for 5 weeks. Microbial (TMAB, lactic acid bacteria, Enterobacteriaceae, moulds and yeasts, Salmonella spp., L. monocytogenes, Cl. perfringens, physical-chemical (pH, water activity, TBARS, L*a*b* colour, texture profile analysis and shear force and sensory (appearance, colour, odour, flavour, juiciness, chewiness and acceptance parameters were determined. According to the results of mesophilic bacterial counts and sensory analysis, the shelf life of the sous vide turkey cutlet, cooked at 65ºC for 40 min, was determined as 28 days at 4ºC while 15 days at 12ºC. Salmonella spp., L. monocytogenes, Cl. perfringens were not detected in turkey cutlet samples during the storage period. It was detected that sous vide cooked provided convenient ready-to-eat foods and a long shelf life for turkey cutlet.

  20. Change in physical and chemical characteristics related to the binomial time-temperature used in sous pasteurization see Tambaqui (Colossoma macropomum

    Directory of Open Access Journals (Sweden)

    H.C.A. Kato

    2016-02-01

    Full Text Available The goal of this study was to evaluate sous vide fish and assess the influence of time and temperature on the pasteurization process through quality parameters. The raw material (tambaqui fillets and the sous vide underwent physical, physicochemical, and microbiological analyses. A sauce was prepared containing soy sauce, water, horseradish and garlic flakes. The product's pasteurization parameters of time and temperature were defined according to a 22 central composite rotatable design (CCRD, and the dependent variables were water holding capacity (WHC and instrumental texture aiming at obtaining high WHC values for the product to maintain the desired juiciness. The microbiological analysis required by legislation have indicated that the fish fillets and sous vide were within de standard. The values of total coliforms found in the samples (fillets and sous vide analyzed were below the critical level of 10² CFU/g. The counts of sulphite-reducing clostridia and psychrotrophic and mesophilic bacteria on plates in the samples were <1x10 CFU/g. In conclusion, temperature was the most important factor in the pasteurization process, significantly contributing to the quality of the final product. The mathematical models proposed were considered predictive for each response.

  1. Tests on dynamic corrosion by water. Influence of the passage of a heat flux on the corrosion kinetics. pH measurement in water at high temperature; Essais de corrosion dynamique par l'eau. Influence du passage d'un flux thermique sur la cinetique de corrosion. Mesure du pH dans l'eau a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Coriou, H.; Grall, L.; Hure, J.; Saint-James, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Berthod [Societe Grenobloise d' Etudes et d' Applications Hydrauliques, 38 (France); Le peintre [Centre National de la Recherche Scientifique (CNRS), 38 - Grenoble (France)

    1958-07-01

    'eau sous pression a une temperature voisine de 280 deg. C, la vitesse de circulation atteint 6 m/s. On etudie, du point de vue de la corrosion, les resultats obtenus, sur des gaines en aluminium, en attachant beaucoup d'attention aux phenomenes de cavitation susceptibles de causer de graves degats dans certaines circonstances particulieres. Apres avoir mis au point un dispositif d'electrode en verre pouvant supporter des pressions elevees les auteurs ont fait des recherches concernant les materiaux susceptibles de fonctionner comme electrode d'hydrogene et capables de resister convenablement a la corrosion par l'eau a 200 deg. C. Diverses possibilites ont ete examinees: electrodes de verres speciaux, de quartz, metallique, a membrane etc. On donne les resultats des differents essais et les limites pratiques d'utilisation. (auteur)

  2. Tests on dynamic corrosion by water. Influence of the passage of a heat flux on the corrosion kinetics. pH measurement in water at high temperature; Essais de corrosion dynamique par l'eau. Influence du passage d'un flux thermique sur la cinetique de corrosion. Mesure du pH dans l'eau a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Coriou, H; Grall, L; Hure, J; Saint-James, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Berthod, [Societe Grenobloise d' Etudes et d' Applications Hydrauliques, 38 (France); peintre, Le [Centre National de la Recherche Scientifique (CNRS), 38 - Grenoble (France)

    1958-07-01

    The passage of a heat flux through the surface of a metal placed in a corrosive medium influences the rate of corrosion, these being higher than under adiabatic conditions. The apparatus developed for corrosion tests is described, it is possible to obtain with this equipment: 1) Heat fluxes greater than 200 W/cm{sup 2}, across aluminium canning, which is cooled by water (temperature 50 deg. C), circulating with flow rates of the order of 5 to 6 m/s. 2) Heat fluxes which can go up to 150 W/cm{sup 2}, across canning of zircaloy or stainless steel. The cooling fluid is pressurized water at a temperature around 280 deg. C, the flow-rate of circulation reaching 6 m/s. The results obtained on aluminium canning are studied from the viewpoint of corrosion, paying particular attention to cavitation phenomena which can cause serious damage in certain special circumstances. After developing a glass electrode system capable of supporting high pressures, the authors have investigated materials capable of functioning as a hydrogen electrode and of resisting satisfactorily corrosion by water at 200 deg. C. Various possibilities have been examined: electrodes of special glasses, quartz, metals, with a membrane etc... The results of the various tests and the practical limits of utilisation are given. (author)Fren. [French] Le passage d'un flux thermique a travers la surface d'un metal place dans un milieu corrosif influence les vitesses de corrosion, celles-ci etant plus elevees que dans des conditions adiabatiques. On decrit les appareils mis au point, pour essais de corrosion. Ils permettent d'obtenir: 1) A travers des gaine aluminium des flux thermiques depassant 200 W /cm{sup 2}. Les gaines sont refroidies par l'eau (temperature 50 deg. C), circulant a des vitesses de l'ordre de 5 a 6 m/s. 2) A travers des gaines en zircaloy ou acier inoxydable des flux thermiques pouvant s'elever a 150 W/cm{sup 2}. Le fluide de refroidissement est de l'eau sous pression a une temperature

  3. Fixation à haute et moyenne température de l'hydrogène sulfuré par des masses de captation régénérables Hydrogen-Sulfide Fixation At High and Medium Temperature by Regenerable Capture Masses

    Directory of Open Access Journals (Sweden)

    Hotier G.

    2006-11-01

    Full Text Available L'intérêt de la désulfuration haute température comparée à la même opération conduite à basse température est renforcé quand la désulfuration a lieu entre deux opérations de niveau thermique élevé comme la gazéification du charbon et la production d'électricité par cycles combinés turbine à gaz-turbine à vapeur. Les masses absorbantes à base d'oxyde de fer peuvent réaliser une bonne désulfuration mais résistent mal aux chocs thermiques. Un agent de régénération particulièrement efficace est le dioxyde de soufre qui peut réoxyder le sulfure de fer par une réaction légèrement endothermique. Un des principaux avantages de cette réaction est la production directe de soufre élémentaire. Ses désavantages sont une faible conversion par passe et la sulfatation de l'oxyde de calcium (une des nombreuses impuretés des boues rouges qui composent la masse. Lorsque l'on emploie de la vapeur pour diluer le SO2 deux autres réactions ont lieu. La production de soufre est augmentée et la sulfatation disparaît. Les productions principales du procédé sont du soufre élémentaire et de la vapeur haute pression. On rencontre deux zones de réactions (l'une de captation, l'autre de régénération séparées par un tampon de gaz inerte et une circulation de la masse. Aucune autre unité de traitement de soufre n'est requise sur le site. Une évaluation économique préliminaire montre que ce procédé est compétitif lorsqu'on le compare à un lavage des gaz par solvant, à froid. The interest of a high temperature unit compared to a low temperature one is enhanced when desulphurization takes place between two hotoperations like coal gasification and power generation by combined cycles. Iron oxide based sorbents such as redmuds can achieve good desulphurization but cannot withstand high temperature gradients. An efficient regenerating agent is sulphur dioxide. SO2 can regenerate iron sulphide with a slightly endothermic

  4. Influence of Citric Acid on the Pink Color and Characteristics of Sous Vide Processed Chicken Breasts During Chill Storage

    Science.gov (United States)

    Lim, Ki-Won

    2015-01-01

    Chicken breast dipped with citric acid (CA) was treated by sous vide processing and stored in a refrigerated state for 0, 3, 6, 9, and 14 d. A non-dipped control group (CON) and three groups dipped in different concentrations of citric acid concentration were analyzed (0.5%, 0.5CIT; 2.0%, 2CIT and 5.0%, 5CIT; w/v). Cooking yield and moisture content increased due to the citric acid. While the redness of the juice and meat in all groups showed significant increase during storage, the redness of the citric acid groups was reduced compared to the control group (pacid reactive substances (TBARS) were generally lower in the citric acid-treated samples than in untreated ones, indicating extended shelf life of the cooked chicken breast dipped in citric acid solution. The shear force of the 2CIT and 5CIT groups was significantly lower (pcitric acid concentrations. PMID:26761885

  5. Effect of different temperature-time combinations on lipid and protein oxidation of sous-vide cooked lamb loins.

    Science.gov (United States)

    Roldan, Mar; Antequera, Teresa; Armenteros, Monica; Ruiz, Jorge

    2014-04-15

    Forty-five lamb loins were subjected to sous-vide cooking at different combinations of temperature (60, 70 and 80 °C) and time (6, 12 and 24 h) to assess the effect on the oxidative stability of lipids and proteins. Heating induced both lipid and protein oxidation in lamb loins. Higher cooking temperature-time combinations increased conjugated dienes and decreased thiobarbituric reactive substances (TBARS) values and hexanal. Total protein carbonyls increased throughout time at all cooking temperatures considered, while α-aminoadipic (AAS) and γ-glutamic semialdehydes (GGS) increased when cooking at 60 °C but not at 80 °C. Links between the decrease in secondary compounds from lipid oxidation due to cooking at higher temperatures and for longer times with the increased levels of 3-methylbutanal and greater differences between total protein carbonyls and AAS plus GGS were hypothesised. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. Les images en géographie sous l’angledes humanités numériques

    Directory of Open Access Journals (Sweden)

    Gaëlle Hallair

    2009-04-01

    Full Text Available L’article présente une méthodologie pour conserver, stocker, inventorier, archiver, numériser, indexer, valoriser et diffuser des archives géographiques sous l’angle des Digital humanities. L’article applique cette méthodologie aux images en géographie avant de présenter un projet de plate-forme documentaire concernant les plaques de verres du fonds Emmanuel de Martonne hébergées actuellement par l’UMR CNRS 8586 PRODIG.This article points out the methodology of Digital humanities to preserve, to stock, to make an inventory, to digitize, to index, to enhance the value und to spread geographical archives. It applies this methodology to geographical visual documents and presents a database project about photographic plates of the Emmanuel de Martonne’s collection localised in the research center PRODIG (UMR CNRS 8586.

  7. Lille, place financière intermédiaire sous la Révolution et l’Empire

    OpenAIRE

    De Oliveira, Matthieu

    2011-01-01

    Dernière grande place négociante et financière avant la frontière septentrionale, Lille joue pleinement son rôle d’intermédiaire entre les marchés parisiens au Sud et belgo-hollandais au Nord sous la Révolution et l’Empire. La déclaration de guerre en 1792 puis la départementalisation des territoires conquis ne font que renforcer la position nodale des acteurs économiques et financiers de la place. Au premier rang d’entre eux, François Briansiaux mobilise efficacement son important réseau de ...

  8. Report on Action Research: An Analysis of the Effects of Selected Instructional Strategies on Student Achievement at Terre Haute North Vigo High School

    Science.gov (United States)

    Haystead, Mark W.

    2010-01-01

    This report describes the findings of an analysis of a series of action research projects conducted by Vigo County School Corporation at Terre Haute North Vigo High School. During the 2009-2010 school year, 17 teachers participated in independent action research studies regarding the extent to which selected instructional strategies enhanced the…

  9. [The Future Of The City As A Community: Vigo County Public Library Staff Institute (13th, Terre Haute, Indiana, June 4, 1971).

    Science.gov (United States)

    Vigo County Public Library, Terre Haute, IN.

    The topic of the all day institute was: What planning is going on that will work for a revitalized Terre Haute and Vigo County? The goals were: (1) to arouse interest and awareness of city needs by presenting a brief overview of the physical characteristics of the city, (2) to identify the governmental services that have responsibility for city…

  10. Report on Action Research: An Analysis of the Effects of Selected Instructional Strategies on Student Achievement at Terre Haute South Vigo High School

    Science.gov (United States)

    Haystead, Mark W.

    2010-01-01

    This report describes the findings of an analysis of a series of action research projects conducted by Vigo County School Corporation at Terre Haute South Vigo High School (hereinafter referred to as South Vigo). During the 2009-2010 school year, 20 teachers at South Vigo participated in independent action research studies regarding the extent to…

  11. Studies of in Situ Pore Pressure Fluctuations At Various Scales Études des fluctuations in situ de la pression de pore à différentes échelles

    Directory of Open Access Journals (Sweden)

    Kümpel H. J.

    2006-12-01

    Full Text Available Pore pressure fluctuations in fluid saturated geological formations, either of natural or anthropogenic origin, can be observed at different scales. Natural fluctuations, e. g. , due to tidal, barometric or seismogenic forcing, or man-made effects as through use of underground fluid reservoirs, or initial filling and cyclic loading of lake reservoirs may have wavelengths from meters to kilometers. In situ monitoring of processes, in which both rock deformation and pore pressure changes are significant, improves our knowledge on the mechanical behaviour and the role of pore pressure in porous rocks and sedimentary layers. Pressure transducers for continuous recording of fluid level variations in wells, reflecting pore pressure changes at depth, or borehole tiltmeters that are sensitive to ground deformation caused by gradients of pore pressure fluctuations are relatively simple means to trace the dynamics of such rock-fluid interactions. The obtained data series are usually interpreted in two ways: by application of analytical solutions-adopting homogeneous poroelastic conditions or single fracture models in a uniform, elastic medium-and by simulation through numerical calculations allowing for some heterogeneity in the model volume. Field cases presented in this article include tilt measurements in the vicinity of pumped wells (1 to 100 m scale, fluid level monitoring in wells (borehole scale, and studies of pore pressure effects induced by seismic events (1 to 100 km scale. Specific rock parameters that can be constrained are the Skempton ratio, the hydraulic diffusivity, and the type of the effective rheology. In cases of tiltmeter studies, anisotropy of pore fluid flow can also be detected. Keywords: fluids in rocks, pore pressure, poroelasticity, hydrology. Les fluctuations de la pression de pore dans les formations géologiques saturées en fluides, d'origine naturelle ou anthropogéniques, peuvent être observées à différentes

  12. La haute mer : un espace aux frontières de la recherche géographique

    Directory of Open Access Journals (Sweden)

    Camille Parrain

    2012-02-01

    Full Text Available La haute mer est un espace encore peu étudié au sein de la géographie. Ses caractéristiques en font un espace complexe et reflètent son altérité. L’océan est un terrain difficile et original permettant de se confronter à l’interdisciplinarité (géographie, océanographie, climatologie, biologie, histoire, économie. Les approches menées au sein de la géographie sont souvent régionales, sectorielles, côtières et appliquées et peu cherchent à s’orienter vers des approches théoriques ou vers la haute mer. Nous ferons ici un état des lieux de la place de l’océan au sein de la géographie et tâcherons d’ouvrir des perspectives de recherche en prenant l’exemple de la navigation à voile et de la notion de territoire en haute mer que nous qualifierons de « merritoire ». Pour le définir, nous proposons d’ouvrir sur les notions de mobilité, discontinuités, réseaux et de paysage marin. Le paysage, reflet de l’interdisciplinarité, apparaît également comme étant une piste pour la gestion de l’espace maritime.The high sea has been little studied within geography. Its characteristics show that it is a complex space and do reflect its alterity. The ocean is a difficult and original fieldwork that invites to be analyzed with interdisciplinary methods (geography, oceanography, climatology, biology, history, economy. The geographical approach has so far mainly been an applied geography and has focused on regional, sectorial and coastal aspects. Few are aiming at theoretical approaches or on the high seas. We will overview the position of the ocean within geography and will try to explore new research perspectives by taking into account sailing and the concept of territory in the high sea that we will define as « maritory ». To define it, we offer to discuss on the terms of mobility, discontinuity, network and seascape. Seascape - example of an interdisciplinary tool- could appear as a method for marine

  13. Initial status of the environment. Environmental marks of the Meuse-Haute Marne underground research laboratory; L'etat initial de l'environnement. Reperes environnementaux du Laboratoire de Recherche souterrain de Meuse/Haute-Marne

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    On August 3, 1999, the French government gave the permission to the national agency of radioactive wastes (ANDRA) to build up a research laboratory devoted to the feasibility study of a facility for the reversible disposal of high level and long living radioactive wastes in deep geologic beds. The site retained is located at Bure, at the boundary of the Meuse and Haute-Marne departements. Before starting the construction of this research facility, the ANDRA has carried out a careful survey of the initial environmental status of the site which will serve as a reference. This brochure presents the results of this survey: geo-morphology, agriculture, natural ecosystems, radioecology, sound levels, air quality, surface and groundwater quality. The ANDRA has implemented an environmental monitoring plan for each phase of the development of the project. (J.S.)

  14. Utilisation des sous-produits agroalimentaires dans l’alimentation des poissons d’élevage en Côte d’Ivoire

    Directory of Open Access Journals (Sweden)

    Kimou Nestor B.

    2016-03-01

    Full Text Available Cette étude évalue l’impact de l’utilisation des sous-produits agroalimentaires dans l’alimentation des poissons d’élevage en Côte d’Ivoire. Une enquête a été réalisée en 2013 dans quinze principales zones piscicoles sur les caractéristiques technico-économiques des fermes, le profil socio-économique des promoteurs et les pratiques aquacoles, particulièrement l’alimentation des poissons. Les résultats révèlent que 71 % des pisciculteurs enquêtés utilisent des sous-produits agricoles durant au moins un stade de production. Parmi eux, 53 % utilisent exclusivement des sous-produits. Le son de riz (52 % et le mélange de sons de riz et de maïs (28 % sont les plus utilisés. Les prix moyens de ces sous-produits varient entre 20 et 105 FCFA/kg. Oreochromis niloticus et Heterotis niloticus sont les principales espèces élevées en polyculture sur les fermes. Les sous-produits sont utilisés en système semi-intensif, extensif et en rizipisciculture, en majorité en zone rurale. Les pisciculteurs sont pour la plupart des agriculteurs, âgés de plus de 40 ans. Les taux d’utilisation des sous-produits sont plus élevés dans les régions de l’Ouest, du Centre-Ouest et du Sud-Ouest de la Côte d’Ivoire, par rapport à celles du Sud et de l’Est. Les rendements des fermes sont relativement faibles (544 à 2445 kg/ha/an, avec des gains moyens quotidiens de 0,87 et 9,97 g/j pour le tilapia et l’heterotis respectivement. L’analyse des stratégies des acteurs suggère la nécessité de définir des mécanismes d’accompagnement et de financement de la pisciculture, afin que ces acteurs puissent améliorer les formulations alimentaires à partir des matières premières locales et accessibles.

  15. Structure et fonctionnement des écosystèmes du Haut-Rhône français.

    Directory of Open Access Journals (Sweden)

    KRAIEM M. M.

    1980-07-01

    Full Text Available L'examen qualitatif de contenus stomacaux de Barbeaux du Haut-Rhône français met en évidence un régime alimentaire assez varié, essentiellement zoophage, avec une composante permanente constituée, par ordre de dominance décroissante, de larves de Diptères, d'Ephéméroptères, de Trichoptères et de Nématodes. Ce régime parait, d'autre part, davantage lié à la taille, à l'âge du poisson et au faciès du cours d'eau, qu'à la composition de la faune benthique. Le Barbeau est planctonophage et microbenthophage pendant son jeune âge ; il devient essentiellement benthophage en vieillissant.

  16. The process of constructing a project for producing electricity from wind power in Haute Saintonge and its social unacceptability

    International Nuclear Information System (INIS)

    Canel-Depitre, Beatrice

    2017-01-01

    In front of increase of conflicts finding big environmental projects, approval of social players quickly became an essential condition in their realization, raising social acceptability to rank of priorities. To illustrate my search on social acceptability, I chose to study project of presence of an industrial wind farm on municipalities of Allas Bocage and Nieul-le-Virouil in Haute Saintonge. Methodology rests on participating observation which authorizes understanding of a group. If the social acceptability is a fragile and slow process to be built, the social unacceptability takes root durably. My problem rests on the process of construction of the social unacceptability, fruit of a different logic between promoter and local actors. My results allow me to highlight the processual dimension of the social unacceptability of one project. (author)

  17. The uranium of two 'private': from Jouac (Haute-Vienne) to Bertholene (Aveyron) through Saint-Pierre (Cantal)

    International Nuclear Information System (INIS)

    Guiollard, P.Ch.; Milville, G.

    2003-01-01

    In this book, the author tells us the short but intense history of some French uranium mines among the most famous ones: Jouac-Le Bernardan (Limousin) and Bertholene (Aveyron). It gives also a precious description of the discovery of the spar-fluor ore of La Charbonniere mine (Haute-Vienne) initially discovered thanks to its radioactivity (anthozonite bed) and which supplied a huge amount of fluorine. It presents the main companies (Scumra and Charbonnages du Dong-Trieu) which have exploited these deposits and also some less-known uranium mines of Aveyron, Creuse, Correze, Cantal and Limousin. The text is fully illustrated with cross sections and photos and gathers a large amount of geological and historical documents about mining techniques. (J.S.)

  18. Geoscientific (GEO) database of the Andra Meuse / Haute-Marne research center

    International Nuclear Information System (INIS)

    Tabani, P.; Hemet, P.; Hermand, G.; Delay, J.; Auriere, C.

    2010-01-01

    Document available in extended abstract form only. The GEO database (geo-scientific database of the Meuse/Haute-Marne Center) is a tool developed by Andra, with a view to group in a secured computer form all data related to the acquisition of in situ and laboratory measurements made on solid and fluid samples. This database has three main functions: - Acquisition and management of data and computer files related to geological, geomechanical, hydrogeological and geochemical measurements on solid and fluid samples and in situ measurements (logging, on sample measurements, geological logs, etc). - Available consultation by the staff on Andra's intranet network for selective viewing of data linked to a borehole and/or a sample and for making computations and graphs on sets of laboratory measurements related to a sample. - Physical management of fluid and solid samples stored in a 'core library' in order to localize a sample, follow-up its movement out of the 'core library' to an organization, and carry out regular inventories. The GEO database is a relational Oracle data base. It is installed on a data server which stores information and manages the users' transactions. The users can consult, download and exploit data from any computer connected to the Andra network or Internet. Management of the access rights is made through a login/ password. Four geo-scientific explanations are linked to the Geo database, they are: - The Geosciences portal: The Geosciences portal is a web Intranet application accessible from the ANDRA network. It does not require a particular installation from the client and is accessible through the Internet navigator. A SQL Server Express database manages the users and access rights to the application. This application is used for the acquisition of hydrogeological and geochemical data collected on the field and on fluid samples, as well as data related to scientific work carried out at surface level or in drifts

  19. Effect of the cooking method (grilling, roasting, frying and sous-vide) on the oxidation of thiols, tryptophan, alkaline amino acids and protein cross-linking in jerky chicken

    OpenAIRE

    Silva, Fábio A. P.; Ferreira, Valquíria C. S.; Madruga, Marta S.; Estévez, Mario

    2016-01-01

    Broiler breast (pectoralis major) meat was submitted to salting with NaCl + NaNO3 followed by a drying process to produce jerky-type chicken. The final product (raw broiler charqui) was desalted and then cooked using grilled, roasted, fried and sous-vide techniques. Sous-vide cooked samples showed lowest results of moisture loss compared to roasted and fried ones. Fatty acid profile suffered minor changes after cooking of broiler charqui. Regarding to protein oxidation, tryptophan fluorescenc...

  20. Measurements for uranium-light water subcritical assembly; Mesures pour ensemble sous-critique uranium-eau legere d'enseignement

    Energy Technology Data Exchange (ETDEWEB)

    Barre, J Y [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-07-01

    The aim of this report is to determine the matter Laplacian of a subcritical assembly, done for educational purposes, using natural uranium combustible and light water for the moderator and the reflector. (M.B.) [French] L'objet de ce rapport est la determination du Laplacien matiere d'un reseau sous-critique, destine a l'enseignement, utilisant comme combustible l'uranium naturel et comme moderateur et reflecteur l'eau naturelle. (M.B.)

  1. Comportement en vapocraquage de molécules modèles et de distillats sous vide hydrotraités. Première partie : potentialité de craquage, réacteur à profil de température rectangulaire et à court temps de séjour Steam-Cracking Behavior of Model Molecules and Hydrotreated Vacuum Distillates

    Directory of Open Access Journals (Sweden)

    Berthelin M.

    2006-11-01

    Full Text Available Dans le cadre de la valorisation des coupes lourdes par vapocraquage, des distillats sous vide plus ou moins hydrotraités et des molécules modèles ont été pyrolysés. Cette étude a été réalisée sur un micropilote dont la partie réactionnelle est chauffée entre 680 et 860°C, par induction électromagnétique haute fréquence; le débit total peut varier de 60 à 800 g/h avec une perte de charge inférieure à 0,3 bar. Deux réacteurs tubulaires spiralés de rapport surface/volume allant jusqu'à 2000 m-1 permettent d'atteindre des temps de séjour de 10 à 400 millisecondes. Un indice quantifiant l'aptitude de chaque molécule à produire de l'éthylène, du propylène et des composés lourds, a permis l'établissement d'une échelle de potentialité de craquage, permettant d'orienter les performances d'un catalyseur de prétraitement : optimisation de la consommation d'hydrogène, meilleure valorisation des charges lourdes lors du vapocraquage. Grâce au profil de température rectangulaire du micropilote, des gains très importants de rendements d'éthylène et une production très faible d'asphaltènes ont été mis en évidence par pyrolyse de distillats sous vide hydrotraités. L'importance primordiale de la température dans le couple température-temps de séjour a été confirmée. Within the framework of the upgrading of heavy cuts for steam cracking, more or less hydrotreated vacuum distillates and model molecules were pyrolyzed. This research was done in a micropilot plant in which the reaction section was heated to between 680 and 860°C by high-frequency electromagnetic induction. The total flow rate can vary from 60 to 800 g/h with a pressure drop of less than 0. 3 bar. Two spiral tubular reactors with a high surface/volume ratio of up to 2000 m-1 enable residence times of 10 to 400 milliseconds to be obtained. An index quantifying the capacity of each molecule to produce ethylene, propylene and heavy compounds was used

  2. Microfracture pattern compared to core-scale fractures in the borehole of Soultz-sous-Forets granite, Rhine graben, France

    Energy Technology Data Exchange (ETDEWEB)

    Dezayes, C.; Villemin, T. [Universite de Savoie (France). Laboratoire de Geodynamique des Chaines Alpines, UPRES-A CNRS 5025; Pecher, A. [Universite Joseph Fourier, Grenoble (France). Laboratoire de Geodynamique des Chaines Alpines, UPRES-A CNRS 5025

    2000-07-01

    Microfractures appearing in thin section as fluid inclusion trails in quartz crystals were studied in four core samples of Soultz-sous-Forets granite. Their orientations in four series of three mutually perpendicular thin sections were estimated using a previously described apparent dip method and a new method involving measurements of strike and apparent dips. Three samples display three microfracture sets and one sample displays two sets. In all samples, one set is nearly vertical and strikes N-S. In two samples, one and two sets are nearly vertical and strike E-W. In two samples, two sets strike NW-SE: one is vertical, the other dips gently to the NE (or SW). Comparing microfracture and mesofractures sets in the same cores shows that (1) the N-S microfacture set is always dominant at both scales and (2) all other microfracture sets have no mesoscopic counterpart. The N-S microfracture sets could have been created during E-W extension of earliest Cenozoic age (Rhine Graben rifting). Differences between the two scales are explained by a {sigma}{sub 1}/{sigma}{sub 2} switching which occurred at the crystal scale and generated mutually perpendicular cracks.

  3. Studies and support for the EGS reservoirs at Soultz-sous-Forets. April 2004 - May 2009. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Portier, S.; Vuataz, F.-D. [Centre de Recherche en Geothermie (CREGE), Neuchatel (Switzerland)

    2009-08-15

    This comprehensive final report for the Swiss Federal Office of Energy (SFOE) takes a look at the activities carried out during the period from April 2004 up to May 2009 at Soultz-sous-Forets, France, in connection with the enhanced geothermal systems (EGS) at that location. The report describes the work performed by the Swiss EGS Research and Development group involved in the Soultz project. The principal target set was to install and operate a power plant, enabling the deep reservoir/heat exchanger to be operated, evaluated and improved under realistic conditions. The Swiss contributors have been participating in several work packages: Short and long term tests and medium-term tests of the three-well reservoir/heat exchanger system, development and up-scaling, technical and economic design of larger, industrial, EGS units and the development of stimulation methodology for EGS. The exchange of findings obtained during this project phase is discussed, as is the state-of-the-art of EGS stimulation methods, the interpretation of logging data. Also, seismic /-hydraulic factors, the evaluation of the production/injection performance of the boreholes and reservoir development strategies are discussed as are the modelling of geochemical impact of forced fluid circulation in the deep geothermal reservoir and the results of chemical stimulation tests performed on site.

  4. Efficacy of Combined Sous Vide-Microwave Cooking for Foodborne Pathogen Inactivation in Ready-to-Eat Chicory Stems.

    Science.gov (United States)

    Renna, Massimiliano; Gonnella, Maria; de Candia, Silvia; Serio, Francesco; Baruzzi, Federico

    2017-07-01

    There is a variety of different food processing methods, which can be used to prepare ready-to-eat foods. However, the need to preserve the freshness and nutritional qualities leads to the application of mild technologies which may be insufficient to inactivate microbial pathogens. In this work, fresh chicory stems were packed under a vacuum in films, which were transparent to microwaves. These were then exposed to microwaves for different periods of time. The application of sous vide microwave cooking (SV-MW, 900 W, 2450 MHz), controlled naturally occurring mesophilic aerobic bacteria, yeasts and molds for up to 30 d when vacuum-packed vegetables were stored at 4 °C. In addition, the process lethality of the SV-MW 90 s cooking was experimentally validated. This treatment led to 6.07 ± 0.7 and 4.92 ± 0.65 log cfu/g reduction of Escherichia coli and Listeria monocytogenes inoculated over the chicory stems (100 g), respectively. With an initial load of 9 log cfu/g for both pathogens, less than 10 cfu/g of surviving cells were found after 90 s cooking. This shows that short-time microwave cooking can be used to effectively pasteurize vacuum-packed chicory stems, achieving >5 log cfu/g reduction of E. coli and L. monocytogenes. © 2017 Institute of Food Technologists®.

  5. Ornithological monitoring of the wind farms of the Garrigue high plateau (Aude); Suivi ornithologique des parcs eoliens du Plateau de Garrigue Haute (Aude)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This document presents the monitoring of the premarital migration 2001 in the wind farm of Corbieres-Maritime on the Garrigue Haute plateau. It aims to study the wind turbines impacts and risks on the migration. In spite of a weak mortality, the number of observed modifications in the birds habits at the approach of the wind turbines confirms the necessity of taking into account the migration phenomena in the wind farms projects. (A.L.B.)

  6. Combining functional weed ecology and crop stable isotope ratios to identify cultivation intensity: a comparison of cereal production regimes in Haute Provence, France and Asturias, Spain.

    Science.gov (United States)

    Bogaard, Amy; Hodgson, John; Nitsch, Erika; Jones, Glynis; Styring, Amy; Diffey, Charlotte; Pouncett, John; Herbig, Christoph; Charles, Michael; Ertuğ, Füsun; Tugay, Osman; Filipovic, Dragana; Fraser, Rebecca

    This investigation combines two independent methods of identifying crop growing conditions and husbandry practices-functional weed ecology and crop stable carbon and nitrogen isotope analysis-in order to assess their potential for inferring the intensity of past cereal production systems using archaeobotanical assemblages. Present-day organic cereal farming in Haute Provence, France features crop varieties adapted to low-nutrient soils managed through crop rotation, with little to no manuring. Weed quadrat survey of 60 crop field transects in this region revealed that floristic variation primarily reflects geographical differences. Functional ecological weed data clearly distinguish the Provence fields from those surveyed in a previous study of intensively managed spelt wheat in Asturias, north-western Spain: as expected, weed ecological data reflect higher soil fertility and disturbance in Asturias. Similarly, crop stable nitrogen isotope values distinguish between intensive manuring in Asturias and long-term cultivation with minimal manuring in Haute Provence. The new model of cereal cultivation intensity based on weed ecology and crop isotope values in Haute Provence and Asturias was tested through application to two other present-day regimes, successfully identifying a high-intensity regime in the Sighisoara region, Romania, and low-intensity production in Kastamonu, Turkey. Application of this new model to Neolithic archaeobotanical assemblages in central Europe suggests that early farming tended to be intensive, and likely incorporated manuring, but also exhibited considerable variation, providing a finer grained understanding of cultivation intensity than previously available.

  7. Present Status of Nitrogen Fixation by Reactor Radiation; Etat Actuel des Recherches sur l'oxydation directe de l'azote sous irradiation dans des reacteurs; Sovremennoe sostoyani opytov po okisleniyu azota izlucheniem iz reaktorov; Estado actual de las investigaciones sobre fijacion del nitrogeno por irradiacion en reactores

    Energy Technology Data Exchange (ETDEWEB)

    Harteck, P; Dondes, S [Rensselaer Polytechnic Institute, Troy, NY (United States)

    1960-07-15

    'oxydation directe de l'azote sous irradiation, entreprises depuis plusieurs annees par le Rensselaer Polytechnic Institute et le Brookhaven National Laboratory, utilisent directement les particules de recul de fission comme rayonnements ionisants, au moyen de la dispersion d'uranium-235 dans des fibres de verre de cinq microns de diametre environ. Les auteurs ont determine les effets de la temperature, de la pression et du rapport azote/oxygene sur la valeur de G pour l'oxydation de l'azote et ont publie le compte rendu de leurs travaux. Ils en donnent un bref apercu. Les recherches en question ont ete effectuees avec des systemes statiques; plus recemment des systemes statiques et des systemes a circulation ont ete utilises a la fois. Avec les systemes statiques, les auteurs se sont surtout attaches a etudier l'effet de l'intensite des rayonnements, notamment sur la cinetique d'equilibre sous irradiation. Ils ont constate que dans des melanges ou le rapport azote/oxygene est de 4 a 1 et de 2 a 1 N0{sub 2} et N{sub 2}0 se forment jusqu'a epuisement de tout l'oxygene present. Un systeme a circulation continue (cycling) fonctionne maintenant dans une boucle a l'interieur du reacteur de Brookhaven. Les auteurs fournissent sur les effets de la temperature, de la pression, du rapport azote/oxygene et de l'intensite des rayonnements des donnees que l'on pourra utiliser pour etablir un projet de reacteur de chimie nucleaire. Le systeme actuel fonctionne sous 10 atmospheres et a 150{sup o}C. La temperature est fonction de l'energie de fission liberee dans les fibres de verre et de la resistance thermique du circuit. Une autre boucle, qui doit fonctionner sous 50 - 75 atmospheres et a 600{sup o} C, est en construction. Il est possible, grace a ces boucles, d'etudier les caracteristiques d'un systeme continu, y compris le comportement des produits de fission liberes dans le courant, gazeux. Les auteurs distinguent trois stades dans la cinetique complexe de l'oxydation de l'azote: reactions

  8. Le modèle judiciaire libéral mis à l’épreuve : la surveillance des juges sous le Directoire

    OpenAIRE

    Berger, Emmanuel

    2007-01-01

    La justice du Directoire est principalement identifiée aux différentes violations infligées par le gouvernement afin de contrôler le pouvoir judiciaire et durcir la répression criminelle. Cette représentation est, en réalité, partiale. L’auteur tente de le prouver à travers l’analyse d’un aspect essentiel du système judiciaire directorial : la surveillance des juges. L’étude des normes et des pratiques montre que le mode de surveillance établi par le code des délits et des peines respecte la ...

  9. La fibroscopie digestive haute chez 2795 patients au centre hospitalier universitaire-campus de Lomé: les particularités selon le sexe

    Science.gov (United States)

    Lawson-Ananissoh, Laté Mawuli; Bouglouga, Oumboma; Bagny, Aklesso; Kaaga, Laconi; Redah, Datouda

    2014-01-01

    Introduction Notre étude consistera à rapporter les indications et les lésions objectivées à la fibroscopie digestive haute et relever les particularités selon le sexe. Méthodes Étude rétrospective, descriptive sur des résultats de compte-rendu de la fibroscopie digestive haute menée en unité d'endoscopie digestive du service d'hépato-gastro-entérologie du CHU Campus de Lomé du 15 Mai 2009 au 31 Décembre 2013. Résultats La fibroscopie digestive haute a été réalisée chez 2795 patients dont 1188 hommes et 1607 femmes. L’âge moyen était de 40,65 ans (Extrêmes: 5 et 93 ans). La fibroscopie digestive haute était normale chez les femmes que chez les hommes avec une différence statistiquement significative (p = 0,000). Les principales indications étaient: les épigastralgies chez les femmes (p = 0,000); les hémorragies digestives hautes (p = 0,000) et l'hypertension portale (p = 0,000) chez les hommes; 3485 lésions pathologiques ont été observées. La pathologie inflammatoire prédominait (56,3%), la pathologie ulcéreuse (13,89%), la pathologie tumorale (2,01%). Les varices et la candidose œsophagiennes étaient significativement notées chez les hommes. Les ulcérations gastriques (p = 0,000), le reflux biliaire duodéno-gastrique (p = 0,017) étaient plus retrouvés chez les femmes et la gastropathie hypertensive beaucoup plus chez les hommes (p = 0,000). Que les lésions duodénales soient inflammatoires ou ulcéreuses associées ou non à une sténose bulbaire, elles étaient plus fréquentes chez les hommes. Conclusion De manière générale, il y avait une prédominance des lésions inflammatoires chez les femmes, les lésions tumorales et ulcéreuses chez les hommes PMID:25852805

  10. Study of a device for the direct measurement of the fission gas pressure inside an in-pile fuel element; Etude d'un dispositif pour la mesure directe de la pression des gaz de fission a l'interieur d'un element combustible en pile

    Energy Technology Data Exchange (ETDEWEB)

    Lavaud, B; Uschanoff, S [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The fission gas pressure inside a fuel element made of a refractory fuel constitutes an important limiting factor for the burn-up. Although it is possible to calculate approximately the volume of gas produced outside the fuel during its life-time; it is nevertheless very difficult to evaluate the pressure since the volume allowed to the fission gases, as well as their temperature are known only very approximately. This physical value, which is essential for the technologist, can only be known by direct in-pile measurement of the pressure. The report describes the equipment which has been developed for this test. (authors) [French] La pression des gaz de fission a l'interieur d'un element combustible a combustible refractaire constitue une des limitations importantes du taux de combustion. Si on peut approcher par calcul la determination du volume, des gaz degages hors du combustible au cours de sa vie, il est par contre tres difficile d'evaluer la pression car le volume alloue aux gaz de fission et leur temperature sont tres mal connus. Cette donnee essentielle pour le technologue ne peut etre atteinte que par une mesure directe en pile de la pression. Le rapport decrit l'appareillage qui a ete mis au point pour cet essai. (auteurs)

  11. In-situ experiments for the determination of rock properties and behaviour at the Meuse/Haute Marne Centre

    Directory of Open Access Journals (Sweden)

    Conil N.

    2010-06-01

    Full Text Available Andra is in charge of studying the feasibility of a disposal facility for longlived high-level nuclear waste (LL-HLW in a deep geological environment. With this aim, dedicated experiments have been carried out for several years at the Meuse/Haute Marne Underground Research Laboratory excavated in a 500 m deep argillaceous rock formation. These experiments include determining the feasibility of the excavation of disposal cells for LL-HLW, consisting of 40 meter long, 70 cm in diameter, horizontal cased micro tunnels. The hydro mechanical impact of the excavation of such openings on the rock mass behaviour is continuously monitored as well as their mean term mechanical behaviour. Since LL-HLW produce heat, the impact of temperature on the surrounding rock mass and on the micro tunnel steel casing will also be studied. Specific instrumentation has been developed to study this impact. The first step of the microtunnel excavation tests, carried out in 2009, has led to improving the excavation method and the drilling machine. These improvements will be tested in the next step of the excavation tests planned for 2010. The THM experiment dedicated to studying the behaviour of the rock mass under thermal solicitation started early 2010. The behaviour of a steel casing in contact with the rock mass and under thermal solicitation will be studied in an experiment scheduled to start in September 2010.

  12. Physical and numerical modelling of permafrost dynamic during a climatic cycle: implications for Meuse - Haute-Marne site

    International Nuclear Information System (INIS)

    Regnier, D.

    2012-01-01

    This manuscript deals about works realized on the permafrost modelling in porous media and its impact on the hydrogeological circulations. These are parts of the Andra's studies on the nuclear waste storage and, on the environmental studies of the Meuse/Haute-Marne (MHM) site. During a climatic cycle, cold periods can generate permafrost (ground with temperature lower than 0 C for 2 consecutive years). This peri-glacial structure propagates towards deep geological layers, and, due to its very low permeability, can stop the flow of water bodies like aquifers. This work presents the elaboration of two numerical models (with Cast3M code (CEA)): (i) a model with thermal conduction, used for the study of a cold wave propagation in porous media with phase transition (water-ice); (ii) a more complex model, managing the thermo-hydraulic coupling of ground phenomenon (conduction, convection and transition of phase). After validation, these two models offer three axes of development: (i) benchmark proposition by the study of two generic test-cases; (ii) study of the local air temperature signal on MHM site: importance of high frequency temperature variations (centennial scale) for permafrost depth and stability; (iii) study of the dynamics of a thermal discontinuity in a typical hydrological system river-plain: closure time of the system by the permafrost according to various parameters (temperatures, geothermal flow, hydrological flow directions). (author) [fr

  13. Water vapor total column measurements using the Elodie Archive at Observatoire de Haute Provence from 1994 to 2004

    Directory of Open Access Journals (Sweden)

    A. Sarkissian

    2009-07-01

    Full Text Available Water vapor total column measurements at Observatoire de Haute Provence (5°42´ E, +43°55´ N, south of France, were obtained using observations of astronomical objects made between July 1994 and December 2004 on the 193-cm telescope with the high-resolution spectrometer Elodie. Spectra of stars, nebulae, and other astronomical objects were taken regularly during 10 years. More than 18 000 spectra from 400 nm to 680 nm are available on-line in the Elodie Archive. This archive, usually explored by astronomers, contains information to study the atmosphere of the Earth. Water vapor absorption lines appear in the visible in delimited bands that astronomers often avoid for their spectral analysis. We used the Elodie Archive with two objectives: firstly, to retrieve seasonal variability and long-term trend of atmospheric water vapor, and secondly, to remove signatures in spectra for further astronomical or geophysical use. The tools presented here (the workflow, the interoperable Elodie Archive and the web service Tellodie are developed following, when possible, formats and standards recommended by the International Virtual Observatory Alliance.

  14. Brigitte SIMONOT et Gabriel GALLEZOT (2009) (dir.), L’entonnoir : Google sous la loupe des sciences de l’information et de la communication

    OpenAIRE

    Bonaccorsi, Julia

    2013-01-01

    Ce titre annonce d’emblée une posture critique et, plus largement, une promesse de dévoilement. L’approche communicationnelle, affirmée dès le sous-titre, saisit Google comme un objet de recherche à construire à distance des discours promotionnels ou pamphlétaires. La recherche collective prend appui sur une perspective sociotechnique, mais également sociopolitique du moteur de recherche et de ses usages, pour interroger la production de valeurs par la société Google. Le moteur est scruté au ...

  15. Generation of Anomalous Internal Pressures in Source Rocks and Its Role in Driving Petroleum Migration La genèse de pressions internes anormales dans les roches mères et son rôle de poussée dans la migration du pétrole

    Directory of Open Access Journals (Sweden)

    Barker C.

    2006-11-01

    Full Text Available High pressures generated within shales probably have an important role in driving the expulsion of oil and gas. The rising temperature that accompanies increasing depth of burial and drives the generation process causes thermal expansion of the water and in an isolated pore aquathermal pressuringcan lead to high overpressures. In addition, the generation process itself seems to proceed with a volume increase that can cause very high overpressures. These mechanisms have been discussed previously only for liquid-filled systems. The presence of gas leads to very different behaviour and pores in source rocks become subnormally pressured on burial unless there is sufficient generation from the organic matter to offset this. In the absence of continuing generation (e. g. for biogenic methane gas steadily dissolves and pressures fall considerably below hydrostatic. Conversely, on uplift gas-bearing systems tend to overpressure and the pressure can rise to the rock load for the depth when fracturing must occur. Thermal cracking of the bitumens that remain in a source rock as it is buried goes with a volume increase, and in an isolated pore system pressures rise to high values. Only about one percent of oil-like butimen needs to be cracked to gas for the pressure to reach the rock load with fracturing as an inevitable consequence. Les pressions élevées générées dans les argiles jouent probablement un rôle important dans l'expulsion de l'huile et du gaz. L'augmentation de température, qui accompagne l'enfouissement et contrôle les processus de genèse, est la cause d'une dilatation thermique de l'eau et, dans un pore isolé, l'aquathermal pressuring peut amener des surpressions élevées. De plus, le processus de genèse lui-même semble être accompagné d'une augmentation de volume pouvant être également la cause de surpressions élevées. Ces mécanismes ont déjà fait l'objet d'études, mais seulement pour des systèmes imbibés de liquides

  16. Effect of the cooking method (grilling, roasting, frying and sous-vide) on the oxidation of thiols, tryptophan, alkaline amino acids and protein cross-linking in jerky chicken.

    Science.gov (United States)

    Silva, Fábio A P; Ferreira, Valquíria C S; Madruga, Marta S; Estévez, Mario

    2016-08-01

    Broiler breast ( pectoralis major ) meat was submitted to salting with NaCl + NaNO 3 followed by a drying process to produce jerky-type chicken. The final product (raw broiler charqui) was desalted and then cooked using grilled, roasted, fried and sous-vide techniques. Sous-vide cooked samples showed lowest results of moisture loss compared to roasted and fried ones. Fatty acid profile suffered minor changes after cooking of broiler charqui. Regarding to protein oxidation, tryptophan fluorescence, protein carbonylation and disulphide bonds formation of chicken charqui were affected by cooking temperature while free thiol groups, Schiff base formation and hardness were mostly impacted by the length of cooking. Instrumental color of broiler charqui was affected by the type of cooking, being closely related with Maillard products formation. In conclusion, sous-vide technique seems to be the most advantageous cooking method to obtain high-quality ready-to-eat chicken charqui.

  17. Microbial investigations in Opalinus clay from Mont Terri and in Callovo-Oxfordian argillite from Meuse/Haute-Marne; Caracterisation microbiologique de l'argile a opalinus du Mont Terri et de l'argilite du callovo-oxfordien de Meuse/Haute-Marne

    Energy Technology Data Exchange (ETDEWEB)

    Poulain, S

    2006-12-15

    The subject of this Ph.D. thesis deals with research achieved in the context of the Axis 2 of the law Bataille voted on December 30, 1991 about the possibility of building a deep geological repository for medium or high activity and long living nuclear waste. Nearby such a site, some microorganisms may influence the mobility of radionuclides coming from the waste canisters. This work consisted in looking for autochthonous microorganisms in the Opalinus clay formation from Mont Terri (Switzerland) and in the Callovo-Oxfordian argillite from Meuse/Haute-Marne (France). Microbial Investigations in these unknown unperturbed environments suggested very low microbial densities in the clayey sediments. However, new bacterial species could be isolated from those samples. In addition, a part of the allochthonous population, which has been introduced by air and human activity, could be identified in the Meuse/Haute-Marne underground research laboratory. (author)

  18. Microbial investigations in Opalinus clay from Mont Terri and in Callovo-Oxfordian argillite from Meuse/Haute-Marne; Caracterisation microbiologique de l'argile a opalinus du Mont Terri et de l'argilite du callovo-oxfordien de Meuse/Haute-Marne

    Energy Technology Data Exchange (ETDEWEB)

    Poulain, S

    2006-12-15

    The subject of this Ph.D. thesis deals with research achieved in the context of the Axis 2 of the law Bataille voted on December 30, 1991 about the possibility of building a deep geological repository for medium or high activity and long living nuclear waste. Nearby such a site, some microorganisms may influence the mobility of radionuclides coming from the waste canisters. This work consisted in looking for autochthonous microorganisms in the Opalinus clay formation from Mont Terri (Switzerland) and in the Callovo-Oxfordian argillite from Meuse/Haute-Marne (France). Microbial Investigations in these unknown unperturbed environments suggested very low microbial densities in the clayey sediments. However, new bacterial species could be isolated from those samples. In addition, a part of the allochthonous population, which has been introduced by air and human activity, could be identified in the Meuse/Haute-Marne underground research laboratory. (author)

  19. The Application of Non-Metallic Core Materials in a High-Temperature Reactor Experiment; Utilisation de materes non metalliques dans le coeur d'un reacteur experimental a haute temperature; Ispol'zovanie nemetallicheskikh materialov dlya aktivnoj zony vysokotemperaturnogo opytnogo reaktora; Empleo de materiales no metalicos en el nucleo de un reactor experimental de alta temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Huddle, R. A.U.; Shepherd, L. R. [Organization for Economic Co-Operation and Development, Dragon Project, Atomic Energy Establishment, Winfrith, Dorset (United Kingdom)

    1963-11-15

    refroidis par un gaz, construire et exploiter, dans le cadre de ce projet, un reacteur experimental de 20 MWth. Le reacteur - dont la construction touche a sa fin - est refroidi a l'helium; la temperature de sortie du coeur est de 750{sup o}C; il emploie de l'uranium-235 comme combustible et du thorium comme matiere fertile. Il est caracterise par l'absence de tout metal dans le coeur du reacteur. En raison'des hautes temperatures, qui peuvent atteindre 1050{sup o}C a la surface des elements combustibles et s'elever au dessus de 1500{sup o}C dans les regions les plus chaudes du combustible, on emploie des materiaux refractaires non metalliques. Le fait que tous les constituants du coeur sont reunis dans l'element combustible permet d'obtenir un rapport eleve entre la surface de transfert de la chaleur et le volume du coeur, d'ou une puissance specifique moyenne elevee pour un ensemble de dimension relativement faible. Chaque element combustible est constitue par un faisceau de tubes de graphite contenant les matieres fissiles et fertiles sous forme de carbure incorpore a des pastilles de graphite. Un courant refroidisseur d'helium traverse le centre de chaque barreau de combustible d'ou il ressort par la base pour etre conduit dans une installation de purification dans laquelle il est debarrasse des produits de fission et autres impuretes avant d'etre achemine de nouveau vers le reacteur. Cette methode permet de reduire la fuite des produits de fission qui, s'echappant du combustible ceramique porte a tres haute temperature, entrent dans le circuit de refroidissement primaire. Les auteurs exposent les problemes lies a la mise au point et a la fabrication du graphite et des elements combustibles ceramiques destines a ce reacteur ainsi que le comportement de ces materiaux dans les conditions de fonctionnement. Ils indiquent les resultats de recherches en pile et dans des boucles d'irradiation. Dans ce programme, tout l'effort se concentre sur la mise au point de reacteurs a

  20. Concentration and Storage of Highly-Active Wastes from the First Stages of the United Kingdom Civil Nuclear Power Programme; Concentration et Stockage des Dechets de Haute Activite au Cours des Premiers Stades du Programme Civil de Production d'Energie d'Origine Nucleaire au Royaume-UNL; КОНЦЕНТРИРОВАНИЕ И ХРАНЕНИЕ ВЫСОКОАКТИВНЫХ ОТХОДОВ НА ПЕРВЫХ СТАДИЯХ ОСУЩЕСТВЛЕНИЯ ПРОГРАММЫ СОЕДИНЕННОГО КОРОЛЕВСТВА ПО ПРОИЗВОДСТВУ ЯДЕPHОЙ ЭЛЕКТРОЭНЕРГИИ ДЛЯ ГРАЖДАНСКИХ ЦЕЛЕЙ; Concentracion y Almacenamiento de Desechos de Elevada Radiactividad en las Primeras Etapas del Programa Civil de Energia Nucleoelectrica del Reino Unido

    Energy Technology Data Exchange (ETDEWEB)

    Clelland, D. W. [United Kingdom Atomic Energy Authority, Production Group, Risley, Warrington (United Kingdom)

    1963-02-15

    The general problems of highly-active waste disposal are discussed and in particular the United Kingdom system of concentrating and storing highly-active waste as an acidic liquid concentrate is described. A speculative estimate is made of the amount of highly- active waste which will arise from reprocessing during the first two decades of the United Kingdom Civil Nuclear Power Programme and engineering design and technical problems associated with the safe and economic confinement of this material are examined. (author) [French] L'auteur analyse les problemes generaux que pose l'elimination des dechets de- haute activite; il decrit plus particulierement la methode appliquee au Royaume-Uni pour concentrer et stocker des dechets de haute activite sous forme d'un liquide concentre acide. U evalue la quantite des dechets de haute activite qui seront produits au cours du traitement de combustibles irradies pendant les deux premieres deconnies du programme civil de production d'energie d'orgine nucleaire et il examine les problemes techniques que pose l'isolement economique et sur de ces substances. (author) [Spanish] El autor examina los problemas generales de la evacuacion de desechos de elevada radiactividad y, en particular, el procedimiento que se aplica en el Reino Unido para concentrar y almacenar desechos muy radiactivos en forma de concentrados liquidos de reaccion acida. Efectua un calculo aproximado de la cantidad de desechos de elevada radiactividad que se orginaran en las operaciones de regeneracion de combustibles durante las dos primeras decadas de ejecucion del programa civil de energia nucleoelectrica en el Reino Unido y analiza los problemas tecnicos y constructivos relacionados con el confinamiento seguro y economico de estas sustancias. (author) [Russian] Obsuzhdajutsja obshhie problemy udalenija radioaktivnyh othodov vysokoj aktivnosti i, v chastnosti, prinjatyj v Soedinennom Korolevstve metod koncentrirovanija i hranenija takih othodov v vide

  1. Physicochemical and microbiological changes during the refrigerated storage of lamb loins sous-vide cooked at different combinations of time and temperature.

    Science.gov (United States)

    Roldán, Mar; Antequera, Teresa; Hernández, Alejandro; Ruiz, Jorge

    2015-10-01

    This study aimed to determine the influence of cooking temperature (either 60 ℃ or 80 ℃) and time (6 h or 24 h) on the physicochemical (weight loss, moisture content, instrumental color, instrumental texture, lipid and protein oxidation) and microbiological changes underwent by sous-vide cooked lamb loins during refrigerated storage for 30 days. There was a slight trend to decreasing weight losses in some of the cooking treatments, but only in samples cooked at 60 ℃ for 6 h it was paralleled with an increase in moisture content. The only noteworthy oxidative change was a marked decrease in conjugated dienes after two weeks of storage in samples cooked at 80 ℃ for 24 h. Neither instrumental texture nor color showed noticeable variations during the storage. Microbial population remained quite low during the whole refrigerated storage. Overall, most of the studied parameters showed only scarce changes throughout 30 days of refrigerated storage that most likely would not influence the quality of sous-vide cooked loin lambs. © The Author(s) 2014.

  2. Effect of different temperature-time combinations on physicochemical, microbiological, textural and structural features of sous-vide cooked lamb loins.

    Science.gov (United States)

    Roldán, Mar; Antequera, Teresa; Martín, Alberto; Mayoral, Ana Isabel; Ruiz, Jorge

    2013-03-01

    Lamb loins were subjected to sous-vide cooking at different combinations of temperature (60, 70, and 80 °C) and time (6, 12, and 24 h). Different physicochemical, histological and structural parameters were studied. Increasing cooking temperatures led to higher weight losses and lower moisture contents, whereas the effect of cooking time on these variables was limited. Samples cooked at 60 °C showed the highest lightness and redness, while increasing cooking temperature and cooking time produced higher yellowness values. Most textural variables in a texture profile analysis showed a marked interaction between cooking temperature and time. Samples cooked for 24h showed significantly lower values for most of the studied textural parameters for all the temperatures considered. Connective tissue granulation at 60 °C and gelation at 70 °C were observed in the SEM micrographs. The sous-vide cooking of lamb loins dramatically reduced microbial population even with the less intense heat treatment studied (60 °C-6 h). Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. Méthode d'estimation des tassements des sols fins sous les remblais d'infrastructures ferroviaires pour lignes à grande vitesse

    Science.gov (United States)

    Said Alami, Soukaina; Reiffsteck, Philippe; Cuira, Fahd

    2018-02-01

    Le besoin de maîtriser les déformations des sols sous les remblais destinés à recevoir les structures de lignes à grande vitesse, en fait un enjeu important pour ces projets. Toutefois, de nombreuses difficultés ont été soulevées liées principalement au grand nombre d'incertitudes qui entourent le phénomène. En effet, la caractérisation géologique et géotechnique dépend de sondages et d'essais où le risque de remaniement est important et dont l'interprétation est, souvent, délicate. Cet article présente une procédure de calcul qui permettrait en pratique d'évaluer le tassement sous remblai avec une bonne précision et qui a été validée sur un certain nombre d'ouvrages. Pour cela, des corrections sont introduites aux méthodes usuelles de calcul permettant d'approcher les valeurs mesurées sur chantier.

  4. Drift Instabilities and Electron Cyclotron Oscillations for Arbitrary Plasma Pressure; Instabilites de Derive et Oscillations Cyclotroniques des Electrons pour des Pressions de Plasma Arbitraires; Drejfovaya neustojchivost' i ehlektronno-tsiklotronnye kolebaniya pri proizvol'nom davlenii plazmy; Inestabilidades de Deriva y Oscilaciones Ciclotronicas de los Electrones en un Plasma de Presion Arbitraria

    Energy Technology Data Exchange (ETDEWEB)

    Krall, N. A.; Pearlstein, L. D. [General Atomic Division, General Dynamics Corporation, San Diego, CA (United States)

    1966-04-15

    champ etant simulee par une force de gravitation fictive. Dans ce cas, la limite correspondant a {beta} = 0 depend des longueurs d'onde. Si {beta} < (masse electronique)/(masse ionique), ou si {beta} <(k{sub II}r{sub p}){sup 2} ou r{sub p} est le rayon de plasma et 1/k{sub II} Greater-Than-Or-Equal-To a la longueur de plasma, la limite {beta} = 0 reste valable. Comme l'instabilite n'existe que pour (k{sub II}r{sub p}){sup 2} < 0,01, il suffit d'une faible pression du plasma pour que la limite {beta}= 0 ne soit plus respectee. Les auteurs calculent la valeur propre pour {beta} >(k{sub ll}r{sub p}){sup 2} et ils determinent les conditions permettant de realiser une stabilisation par configuration cuspidee ainsi qu'une suppression de la stabilite par miroir. Les modes non relativistes a haute frequence dominants du plasma stable. pour lequel {beta} = 0 sont des ondes longitudinales ayant pour frequences des harmoniques de la gyrofrequence des electrons. Lorsque ces modes sont excites ils ne peuvent rayonner que dans le cas ou ils sont couples a des ondes transversales; pour {beta} = 0, ce couplage se produit a la surface ou a l'endroit d'une inhomogeneite. Comme des valeurs finies de {beta} ont pour effetde coupler des ondes longitudinales a des transversales, les auteurs calculent le spectre ainsi que le couplage d'oscillations cyclotronique des electrons pour des valeurs de {beta} arbitraires. (author) [Spanish] La mayoria de las inestabilidades de deriva conocidas (en estrias, universales, etc.) han sido calculadas en el limite en que {beta} = (presion del plasma)/(presion magnetica) = 0. En este limite, el campo electrico perturbado es de indole electrostatica y la ecuacion de Vlasov se simplifica notablemente. El valor lunite de {beta} mas alla del cual la aproximacion electrostatica es aplicable depende del modo particular que se considere, y muchos de los experimentos actuales caen fuera del intervalo de validez. Los autores examinan dos inestabilidades de deriva

  5. Statistical characteristics of sudden stratospheric warming as observed over the observatoire de Haute Provence (44°N, 6°E) during the 1981-2001 period

    CSIR Research Space (South Africa)

    Sivakumar, V

    2006-04-01

    Full Text Available of stratospheric sudden warming as observed over the Observatoire de Haute Provence (44°N, 6°E) during the period 1981-2001 D.V. Acharyulu, V. Sivakumar*, H. Bencherif, B. Morel, Laboratoire de l’Atmosphère et des Cyclones (LACy), CNRS–UMR 8105, Université de... La Réunion, FRANCE. * Also at National Laser Centre, Council for Scientific and Industrial Research (CSIR), Pretoria, SOUTH AFRICA. A. Hauchecorne Service d’Aéronomie, CNRS, Paris, FRANCE. D.N. Rao National Atmosphere Research Laboratory...

  6. The Meuse-Haute Marne underground research laboratory. A scientific research tool for the study of deep geologic disposal of radioactive wastes

    International Nuclear Information System (INIS)

    2006-01-01

    The Meuse-Haute Marne underground research laboratory, is an essential scientific tool for the achievement of one of the ANDRA's mission defined in the framework of the law from December 30, 1991 about the long-term management of high-level and long-living radioactive wastes. This document presents this laboratory: site characterization, characteristics of the Callovo-Oxfordian clay, and laboratory creation, coordinated experiments carried out at the surface and in depth, and the results obtained (published in an exhaustive way in the 'Clay 2005' dossier). (J.S.)

  7. L'érosion dans les environnements glaciaires : exemple du Glacier des Bossons (Massif du Mont-Blanc, Haute-Savoie, France)

    OpenAIRE

    Godon , Cécile

    2013-01-01

    The study presented in this PhD memory aim at better define and quantify the present timeerosion processes in glacial and proglacial domain. The Glacier des Bossons, situated in theMont-Blanc massif (Haute-Savoie, France), is a good example of a natural and nonanthropizedsystem which allows us to study this topic. This glacier lies on two mainlithologies (the Mont-Blanc granite and the metamorphic bedrock) and this peculiarity is usedto determine the origin of the glacial sediments. The sedim...

  8. Hydrogeology and simulation of groundwater flow at the Green Valley reclaimed coal refuse site near Terre Haute, Indiana

    Science.gov (United States)

    Bayless, E. Randall; Arihood, Leslie D.; Fowler, Kathleen K.

    2011-01-01

    The Green Valley reclaimed coal refuse site, near Terre Haute, Ind., was mined for coal from 1948 to 1963. Subsurface coal was cleaned and sorted at land surface, and waste material was deposited over the native glacial till. Approximately 2.7 million cubic yards of waste was deposited over 159 acres (92.3 hectares) in tailings ponds and gob piles. During 1993, the Indiana Department of Natural Resources, Division of Reclamation, improved the site by grading gob piles, filling tailings ponds, and covering the refuse with a layer of glacial drift. During 2008, the Division of Reclamation and U.S. Geological Survey initiated a cooperative investigation to characterize the hydrogeology of the site and construct a calibrated groundwater flow model that could be used to simulate the results of future remedial actions. In support of the modeling, a data-collection network was installed at the Green Valley site to measure weather components, geophysical properties, groundwater levels, and stream and seep flow. Results of the investigation indicate that (1) there is negligible overland flow from the site, (2) the prevailing groundwater-flow direction is from northeast to southwest, with a much smaller drainage to the northeast, (3) there is not a direct hydraulic connection between the refuse and West Little Sugar Creek, (4) about 24 percent of the groundwater recharge emerges through seeps, and water from the seeps evaporates or eventually flows to West Little Sugar Creek and the Green Valley Mine Pond, and (5) about 72 percent of groundwater recharge moves vertically downward from the coal refuse into the till and follows long, slow flow paths to eventual dischage points.

  9. Méthodologie d’analyse des signaux et caractérisation hydrogéologique : application aux chroniques de données obtenues aux laboratoires souterrains du Mont Terri, Tournemire et Meuse/Haute-Marne

    OpenAIRE

    Fatmi, Hassane

    2009-01-01

    Ce rapport présente des méthodes de prétraitement, d'analyse statistique et d'interprétation de chroniques hydrogéologiques de massifs peu perméables (argilites) dans le cadre d'études sur le stockage profond de déchets radioactifs. Les séries temporelles analysées sont la pression interstitielle et la pression atmosphérique, en relation avec différents phénomènes (marées terrestres, effet barométrique, évolution de l'excavation des galeries). Les pré-traitements permetten...

  10. Experimental study on poro-mechanical behavior of saturated Meuse-Haute/Marne argillite subjected to triaxial compression

    International Nuclear Information System (INIS)

    Hu, Dawei; Zhang, Fan; Xie, Shouyi; Shao, Jianfu

    2012-01-01

    Document available in extended abstract form only. Due to its low permeability (10 -18 to 10 -20 m 2 ), the Meuse-Haute/Marne argillite is chosen as the candidate host rock for the geological disposal of high-level radioactive waste by 'Agence Nationale de gestion des Dechets Radioactifs' (ANDRA). During the excavation of the underground tunnel in argillite formation, the Excavation Damaged Zone (EDZ) is expected to develop due to the stress redistribution during excavation and subsequent rock convergence. The nucleation and propagation of microcracks in EDZ can consequently affect the poro-mechanical behavior of the host rock. Therefore, it is of crucial importance to study the poro-mechanical behavior of Meuse-Haute/Marne argillite under the influence of stress induced microcracks. For this purpose, this paper presents the original experimental results of drained and undrained triaxial compression tests as well as evolution of Biot's coefficient during hydrostatic and deviatoric loading of saturated Meuse-Haute/Marne argillite. The size of samples used in the present work is 20x20 mm in order to reduce the saturating time. The axis of the cylindrical sample is perpendicular to the bedding planes. The test system is placed in an insulated room and a temperature control system is used to maintain a constant temperature of 20 ±0.2 C. The saturation condition is an important factor for the determination of the mechanical and poro-elastic properties of saturated argillite. Thus, for each sample, after putting into the triaxial cell, the confining pressure is loaded to 2 MPa and we inject distilled water both at the injection and outlet faces in order to insure the pore pressure at the two faces hold at 1 MPa. This procedure will be keep to 72 hours. Then, the pore pressure at the injection face is increased to 1.5 MPa, and we record the pore pressure at the outlet face. Once the pore pressure at the outlet face reaches the same value at injection face, the sample is

  11. Mechanical Properties of Rocks: Pore Pressure and Scale Effects Propriétés mécaniques des roches : pression de pore et effets d'échelle

    Directory of Open Access Journals (Sweden)

    Gueguen Y.

    2006-12-01

    Full Text Available Pore pressure plays a major role when considering rocks mechanical properties. In that field, the concept of effective pressure is a key one to deal with fluids mechanical effects. However, its frequent use has been the source of frequent confusing statements. Because of the various meanings which have been attached to that concept, an attempt is made in this paper to clarify it and examine the validity of its various uses relative to rock mechanical behaviour or rock properties. At a macroscopic scale, thermodynamics provides a powerful tool to investigate this. Reversible or irreversible thermodynamics provide general relationships of great interest. But because real rocks are non homogeneous systems, a microscopic approach is also required in order to analyze the mechanical properties from a description of the small scale processes. The microscopic approach is complementary of the macroscopic thermodynamic one as it leads to the calculation of the effective properties of the medium. In this last approach, effective medium theory is a powerful tool. The effective properties as derived from the microscale can be nicely combined to thermodynamic relations to interpret pore fluid pressure effects and scale effects. The example of elastic properties of porous rocks is more specifically emphasized to illustrate this because of both its intrinsic interest and importance as far as applications are concerned. La pression de pore joue un rôle de première importance dans la considération des propriétés mécaniques des roches. Dans ce domaine, le concept de contrainte effective est essentiel pour aborder les effets mécaniques. Toutefois, son utilisation fréquente a conduit à de nombreuses affirmations trompeuses. Compte tenu des significations diverses accordées à ce concept, nous tentons ici de le clarifier et examinons le domaine d'application de ses divers emplois dans le cadre du comportement mécanique ou des propriétés des roches. À l

  12. Purification by high vacuum fusion and progressive solidification of uranium from electrolytic origin; Purification par fusion sous vide eleve et solidification progressive d'uranium d'origine electrolytique

    Energy Technology Data Exchange (ETDEWEB)

    Poeydomenge, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-01-15

    grain observed, so-called secondary recrystallisation. in appendix, the method for measuring the electrical resistance by induction (with direct current)is studied from the fundamental and experimental point of view. The author applied it to the particular case of uranium for measuring the low-temperature resistance of the bars from the same which solidified first to the least pure ended the ingot. (author) [French] Dans le cadre de recherches generales sur la purification de l'uranium par fusion de zone, on a entrepris de determiner le degre de purification que l'on pourrait atteindre par une simple solidification progressive a vitesse et direction soigneusement controlees d'un uranium de purete nucleaire courante. Cet uranium de purete intermediaire fournirait un materiau de depart approprie au mode de purification ultime qu'est la fusion a zone verticale, dite ''flottante''. Dans ce but, des lingots d'uranium d'origine electrolytique ont ete refondus sous vide (2 a 5 x 10{sup -6} mm) dans une longue nacelle en UO{sub 2} apres une monte lente en temperature pour eliminer le maximum de gaz et d'impuretes volatiles. Ce degazage et cette volatilisation d'impuretes sont completes par maintien prolonge a haute temperature du bais liquide. Celui-ci est ensuite solidifie d'une extremite a l'autre de la nacelle par deplacement a vitesse lente et constante du front de solidification de facon a obtenir une repartition des impuretes selon les lois etablies par PFANN. Differentes methodes experimentales ont permis de montrer que le metal solidifie en premier lieu est nettement plus pur que celui de la partie solidifie a l'extremite opposee du lingot. Le degre de purification du metal en tete du lingot a ete apprecie, soit quantitativement par mesure du rapport des resistivites electriques a la temperature ambiante et a celle de l'azote liquide, soit qualitativement par l'examen de la structure micrographique et par l'etude de la recristallisation du metal. D'une part, le metal

  13. Lubrifiants extrême-pression pour engrenages. Aspects chimiques de l'optimisation des performances mécaniques Extreme-Pressure Gear Lubricants: Chemical Aspects for Obtaining Optimum Mechanical Performances

    Directory of Open Access Journals (Sweden)

    Born M.

    2006-11-01

    Full Text Available Les conditions optimales de rendement des moteurs correspondent rarement aux besoins de l'utilisation finale de l'énergie en ce qui concerne la vitesse de rotation et le couple, d'où la nécessité de mécanismes intermédiaires qui réalisent l'adaptation nécessaire : réducteurs, boîtes de vitesse (manuelles ou automatiques, boîtes de transfert, ponts arrières. La technologie moderne, particulièrement dans les transports, exige la réduction des masses et des volumes alloués à ces mécanismes, ce qui correspond à des puissances spécifiques de plus en plus élevées, transitant par les engrenages. Malgré les progrès technologiques réalisés dans la conception et la réalisation des engrenages, leur lubrification correcte reste un facteur déterminant. La lubrification des engrenages chargés exige l'emploi de composés chimiques dits additifs extrême-pression . Parmi ceux-ci les combinaisons à base de phosphore et de soufre sont largement utilisées dans l'industrie et seront les seules considérées dans cet article. Le soufre est l'élément extrême-pression par excellence : il forme au niveau des microgrippages un film solide de sulfure de fer facilement cisaillable. Le soufre est apporté par des sulfures ou polysulfures organiques oléosolubles mais sa labilité doit être ajustée de façon à exercer un effet uniquement au niveau local, sans provoquer de corrosion. Une bonne connaissance des relations structure des polysulfures-propriétés mécaniques permet d'optimiser la structure des additifs industriels. L'action antiusure est généralement du ressort des composés phosphorés : dialkyldithiophosphates de zinc, dialkylphosphites, alkylphosphates, sels d'amines des alkylphosphates. En fonction des types d'engrenages et de leurs conditions d'utilisation, des composés sulfurés à soufre plus ou moins labile seront choisis. De même, la balance entre additifs sulfurés et phosphorés sera optimisée. L'utilisation de

  14. Dimensionnement des actionneurs électriques alimentés à fréquence variable sous faible tension

    Science.gov (United States)

    Biedinger, J.-M.; Vilain, J.-P.

    1999-09-01

    In Part I we present a multidisciplinary analysis model for the prediction of functional connections between the design variables and the electromagnetical, electrical and thermal performances of a brushless permanent magnet motor. In this paper we have elaborated a design methodology for electrical motors supplied from a variable-frequency low-voltage source. The objective is to take into account the influence of the inverter's dynamics from the beginning of the design, for the same reasons as we do for electromechanical and thermal constraints. The procedure is based on a Sequential Quadratic Programming optimization method. Two techniques are used to take into account the influence of the inverter: the first one develops the performance analysis with the multidisciplinary model; the second one considers the inverter's current reference as a supplementary optimization variable for the control of the design. Optimization difficulties linked to the chopping of the converter are discuted in connection with a sensitivity analysis of the torque, with respect to the inverter's current reference; a method is proposed to enhance the performances of the algorithm. The method has been applied to the design of a permanent magnet brushless DC motor used in the propulsion system of an electrical scooter; evolution of the design with the complexity level of analysis model is evidenced. Dans une première partie nous avons développé un modèle d'analyse pluridisciplinaire qui établissait les dépendances fonctionnelles entre les variables de conception et les performances magnéto-électro-thermiques d'un moteur brushless à aimants permanents. Dans cet article nous décrivons une procédure de dimensionnement adaptée à la conception de la machine alimentée à fréquence variable sous faible tension. L'objectif est d'intégrer la dynamique du convertisseur électronique dès la phase initiale du dimensionnement, au même titre que les spécifications

  15. Les statuts sociaux dans les Hautes Terres malgaches à la lumière des archives missionnaires norvégiennes

    Directory of Open Access Journals (Sweden)

    Lolona Nathalie Razafindralambo

    2008-08-01

    Full Text Available Les statuts sociaux sur les Hautes Terres malgaches à la lumière des archives de Vig. Les statuts sociaux semblent avoir figuré parmi les thèmes de recherche et de réflexion des missionnaires norvégiens du xixe siècle, avec la religion et l’histoire des différents royaumes du Betsileo (Sud des Hautes Terres de Madagascar, auxquels ils sont liés. Les textes portent notamment sur les groupes princiers qui détiennent le pouvoir et, à l’autre extrémité de l’échelle sociale, les groupes d’andevo (« esclaves ».Social status in Madagascar’s Highlands in light of the Vig Archives. Social status seems to have figured among the themes for research and reflection by the Norwegian missionaries of the 19th century, together with the religion and history of the different kingdoms of Betsileo (in Madagascar’s Southern Highlands to which they are linked. The texts mainly concern the princely groups who were in power, and, at the other end of the social scale, the groups of andevo (slaves.

  16. Melatonin Production, Sleep Patterns and Modeled Performance Effectiveness in Subjects in the High Arctic

    Science.gov (United States)

    2014-05-01

    de la photopériode liées aux saisons dans le Haut Arctique exercent une pression particulièrement forte sur le rythme circadien humain, ce qui peut...travaux décrits était d’étudier le rythme circadien du personnel envoyé dans le Haut Arctique en mesurant régulièrement la mélatonine fabriquée par...extrêmes de la photopériode liées aux saisons dans le Haut Arctique exercent une pression particulièrement forte sur le rythme circadien humain, ce

  17. Final Report on an Analysis of the Education and Training Systems at Milan, Michigan and Terre Haute, Indiana to Federal Prison Industries Incorporated, U.S. Department of Justice.

    Science.gov (United States)

    Hitt, William D.; And Others

    Existing education and training (E&T) programs at the Terre Haute Penitentiary, Indiana, and the Milan Federal Correctional Institution, Michigan, were described and evaluated. Needs, objectives, inmate classification and placement, staff, and other aspects were covered. Reports, staff and inmate interviews, study of instructional materials, and…

  18. Oral Language and Reading; Proceedings of the Annual Reading Conference of the Department of Elementary Education at Indiana State University (3rd, Terre Haute, June 14-15, 1973).

    Science.gov (United States)

    Waterman, David C., Ed.; Gibbs, Vanita M., Ed.

    This pamphlet is a collection of the speeches given at the Third Annual Reading Conference at Indiana State University, Terre Haute. The theme of the conference was "Oral Language and Reading." The contents include: "Official Program"; opening remarks, "They Led and Followed," by William G. McCarthy; opening address, "Strategies for Reading…

  19. 20-year LiDAR observations of stratospheric sudden warming over a mid-latitude site, Observatoire de Haute Provence (44°N, 6°E): Case study and statistical characteristics

    CSIR Research Space (South Africa)

    Charyulu, DV

    2007-11-01

    Full Text Available The present study delineates the characteristics of Stratospheric Sudden Warming (SSW) events observed over the Observatoire de Haute Provence (OHP: 44°N, 6°E). The study uses 20 years of Rayleigh LiDAR temperature measurements for the 1982...

  20. The natural seismic hazard and induced seismicity of the european HDR (hot dry rock) geothermal energy project at Soultz-sous-Forets (Bas-Rhin, France); Alea sismique naturel et sismicite induite du projet geothermique europeen RCS (roche chaude seche) de Soultz-sous-Forets (Bas-Rhin, France)

    Energy Technology Data Exchange (ETDEWEB)

    Helm, J A

    1996-06-07

    Development of the Soultz-sous-Forets HDR (Hot Dry Rock) geothermal energy project will involve important fluid injections which will induce micro-seismic events. This thesis discusses the natural seismicity of the region and induced seismicity associated with fluid injections. A catalogue of all historical and instrument seismicity of the Soultz-sous-Forets (SSF) region has been compiled. This seismicity does not correspond to movements along the major tectonic features of the region. The area around SSF has been identified as being one where high heat flow corresponds to low seismicity. The largest well documented seismic event in the region which took place in 1952 had an epicentral intensity of VI. All important data pertaining to the series of seismic events which took place in the region from August to October 1952 have been collected and are presented. This work details the installation and operation of a permanent 3 station network of accelerometers and seismometers around the HDR site. Also the installation and operation of a mobile network of vertical seismometers during fluid injections. 167 micro-seismic events were recorded on the surface network, with magnitudes from -0.5 to 1.9. The preferential alignment of the micro-seismic cloud is N160 deg. Individual focal mechanisms of the larger seismic events correspond to an extensional tectonic regime. Stress inversion of P wave polarities indicates that the maximum stress is vertical and the intermediate and minimum stress axes horizontal. The largest of the horizontal stresses is orientated N124 deg and the smallest N34 deg. Induced seismic movement is taking place on pre-existing fractures controlled by the in situ stress seismic movement is taking place on pre-existing tectonic fractures controlled by the in situ stress field, and the largest of the induced events had a magnitude 1.9. This level of seismicity does not pose any environmental hazard to the region around Soultz-sous-Forets. (author) 151

  1. Logiques touristiques en station de haute-montagne : quelles évolutions possibles vers la durabilité ?

    Directory of Open Access Journals (Sweden)

    Laurent Arcuset

    2009-12-01

    Full Text Available Ce texte part des enseignements issus d’une évaluation des pratiques touristiques à l’aune des principes du tourisme durable, réalisée en 2004 dans le cadre d’un réseau national piloté par l’Agence Française d’Ingénierie Touristique (aujourd’hui ODIT France, pour la station de Valloire, station de première génération de Maurienne dont le développement et la modernisation dans les années 2000 sont allés de pair avec un vaste programme immobilier. L’article explore les enjeux et les difficultés de la mise en œuvre du développement durable à Valloire, pose la question de la « révolution culturelle » que les acteurs devraient accomplir pour changer de modèle de développement économique, et suggère quelques pistes pour y parvenir. L’approche locale du « tourisme durable », en effet, semble pour l’heure plutôt tendre – comme dans bien d’autres stations de haute montagne – vers une gestion plus environnementale des fonctions urbaines de base que vers une véritable remise en cause d’un modèle touristique reposant sur le triptyque développement du domaine skiable, sécurisation de la ressource neige et programmes immobiliers de tourisme.This text starts from the teachings stemming from an evaluation of the tourist practices in the light of sustainable tourism principles, realized in 2004 within the framework of a national network piloted by the French Agency of Touristic Engineering (today ODIT France, for the ski resort of Valloire, first-generation resort in the Maurienne, which development and modernization in the 2000s kept pace with a vast real estate program. The article investigates the stakes and difficulties of the implementation of sustainable development in Valloire, asks the question of the "cultural revolution" which the actors should achieve to change the model of economic development, and suggest some tracks to reach there. The local approach of "sustainable tourism", indeed

  2. Modelling of the damaged zone induced by the shaft sinking of the Meuse/Haute-Marne underground laboratory (East argilites)

    International Nuclear Information System (INIS)

    Miehe, Baptiste

    2004-01-01

    From a geomechanical point of view, the safety of an underground storage for the radioactive waste requires to characterize the damaged zone induced by the shaft sinking for the storage cavities. Then, the objective of this thesis is to simulate the hydro-mechanical response of the East argilites to the shaft sinking for the Meuse/Haute-Marne underground laboratory, in order to compare the results to the in situ measurements which will be recorded in 2005 (REP experiment). Firstly we have analysed all the mechanical tests which had been carried out from 1995 to 2001. We have observed that each series has his own coherence, in terms of elastic parameters, mechanical strength or creep capacity. But there are some strong differences between the series. These differences, which are due to the experimental protocols and not to the material itself, have shown three important results: the re-saturation phases imposed by several laboratories have deteriorated the mechanical properties of the East argilites, the existence of an effective stress is not evident for these argilites, and their mechanical strength increases when they are dried. From these tests, we have distinguished three mechanisms that produce irreversible strains: compaction, pre-failure, failure. We have described each of them by a straightforward elasto-plastic model, based on the Mohr-Coulomb or Drucker-Prager criterion, with a linear softening. Thus we obtain a complete rheological model for the East argilites by considering simultaneously the three mechanisms (multi-criterion plasticity). Lastly, from the modelling we carried out, we can conclude that: to take into account the irreversible strains that occur before the failure has a great influence on the seize of the failure zone around the shaft (it is very small with respect to the case where the behaviour is elastic until the failure); the pore pressure diffusion modifies very little the mechanical response of the massif (the plastic strains created

  3. Coupled HM modelling of the mine-by test at Meuse-Haute-Marne (MHM) URL France

    International Nuclear Information System (INIS)

    Yildizdag, K.; Shao, H.; Hesser, J.; Soennke, J.; Noiret, A.

    2012-01-01

    Document available in extended abstract form only. In order to test the feasibility of disposing High-Level and Long-Lived Wastes (HLW-LL) in Callovo- Oxfordian clay formation (COx), the French National Radioactive Waste Management Agency (ANDRA) has carried out scientific and engineering investigations in the Meuse-Haute-Marne Underground Research Laboratory (URL) since November 1999. The COx (Figure 1) is of a special interest because of its very favourable characteristics for being a possible host rock for the disposal of radioactive waste. The project OHZ (Observation and Monitoring of the EDZ) was initiated in 2008 by ANDRA. In the framework of this project, a Mine-by experiment was performed in the niche GCS. The excavation was started on 29.01.2008. Displacement and pore pressure evolution during the excavation was measured by different sensors. Within the cooperation between BGR and ANDRA numerical calculations have been done using the code RockFlow to understand the hydraulic and mechanical (HM) coupling mechanisms of Callovo-Oxfordian clay-stone observed during the Mine-by experiment. Modelling results: With regard to the bedding of COx a transverse isotropy approach was applied. Thus the anisotropy effects caused by the bedding have been considered in coupled HM models (Massmann, 2009). Intensive parameter studies in comparison with measured deformation and pore pressure data have been conducted to reduce modelling uncertainties. Fully saturated models yield very precise results in the far field wherein excavation effect has its lower impact. Rapid decline of pore pressure and continuously increasing deformation subsequent to excavation in the near field could not be interpreted even taking shrinkage and partially saturation into consideration. During the Mine-by test, overpressures on sidewalls and reduced pressures on roof and floor were measured due to the mechanical effect on pore pressure which is induced by the bedding. Good agreement between

  4. Elaboration by ion implantation of cobalt nano-particles in silica layers and modifications of their properties by electron and swift heavy ion irradiations; Elaboration par implantation ionique de nanoparticules de cobalt dans la silice et modifications de leurs proprietes sous irradiation d'electrons et d'ions de haute energie

    Energy Technology Data Exchange (ETDEWEB)

    D' Orleans, C

    2003-07-15

    This work aims to investigate the capability of ion irradiations to elaborate magnetic nano-particles in silica layers, and to modify their properties. Co{sup +} ions have been implanted at 160 keV at fluences of 2.10{sup 16}, 5.10{sup 16} and 10{sup 17} at/cm{sup 2}, and at temperatures of 77, 295 and 873 K. The dependence of the particle size on the implantation fluence, and more significantly on the implantation temperature has been shown. TEM (transmission electronic microscopy) observations have shown a mean diameter varying from 1 nm for implantations at 2.10{sup 16} Co{sup +}/cm{sup 2} at 77 K, to 9.7 nm at 10{sup 17} Co{sup +}/cm{sup 2} at 873 K. For high temperature implantations, two regions of particles appear. Simulations based on a kinetic 3-dimensional lattice Monte Carlo method reproduce quantitatively the features observed for implantations. Thermal treatments induce the ripening of the particles. Electron irradiations at 873 K induce an important increase in mean particle sizes. Swift heavy ion irradiations also induce the ripening of the particles for low fluences, and an elongation of the particles in the incident beam direction for high fluences, resulting in a magnetic anisotropy. Mechanisms invoked in thermal spike model could also explain this anisotropic growth. (author)

  5. Research and development of a gaseous detector PIM (parallel ionization multiplier) dedicated to particle tracking under high hadron rates; Recherche et developpement d'un detecteur gazeux PIM (Parallel Ionization Multiplier) pour la trajectographie de particules sous un haut flux de hadrons

    Energy Technology Data Exchange (ETDEWEB)

    Beucher, J

    2007-10-15

    PIM (Parallel Ionization Multiplier) is a multi-stage micro-pattern gaseous detector using micro-meshes technology. This new device, based on Micromegas (micro-mesh gaseous structure) detector principle of operation, offers good characteristics for minimum ionizing particles track detection. However, this kind of detectors placed in hadron environment suffers discharges which degrade sensibly the detection efficiency and account for hazard to the front-end electronics. In order to minimize these strong events, it is convenient to perform charges multiplication by several successive steps. Within the framework of a European hadron physics project we have investigated the multi-stage PIM detector for high hadrons flux application. For this part of research and development, a systematic study for many geometrical configurations of a two amplification stages separated with a transfer space operated with the gaseous mixture Ne + 10% CO{sub 2} has been performed. Beam tests realised with high energy hadrons at CERN facility have given that discharges probability could be strongly reduced with a suitable PIM device. A discharges rate lower to 10{sup 9} by incident hadron and a spatial resolution of 51 {mu}m have been measured at the beginning efficiency plateau (>96 %) operating point. (author)

  6. Elaboration by ion implantation of cobalt nano-particles in silica layers and modifications of their properties by electron and swift heavy ion irradiations; Elaboration par implantation ionique de nanoparticules de cobalt dans la silice et modifications de leurs proprietes sous irradiation d'electrons et d'ions de haute energie

    Energy Technology Data Exchange (ETDEWEB)

    D' Orleans, C

    2003-07-15

    This work aims to investigate the capability of ion irradiations to elaborate magnetic nano-particles in silica layers, and to modify their properties. Co{sup +} ions have been implanted at 160 keV at fluences of 2.10{sup 16}, 5.10{sup 16} and 10{sup 17} at/cm{sup 2}, and at temperatures of 77, 295 and 873 K. The dependence of the particle size on the implantation fluence, and more significantly on the implantation temperature has been shown. TEM (transmission electronic microscopy) observations have shown a mean diameter varying from 1 nm for implantations at 2.10{sup 16} Co{sup +}/cm{sup 2} at 77 K, to 9.7 nm at 10{sup 17} Co{sup +}/cm{sup 2} at 873 K. For high temperature implantations, two regions of particles appear. Simulations based on a kinetic 3-dimensional lattice Monte Carlo method reproduce quantitatively the features observed for implantations. Thermal treatments induce the ripening of the particles. Electron irradiations at 873 K induce an important increase in mean particle sizes. Swift heavy ion irradiations also induce the ripening of the particles for low fluences, and an elongation of the particles in the incident beam direction for high fluences, resulting in a magnetic anisotropy. Mechanisms invoked in thermal spike model could also explain this anisotropic growth. (author)

  7. Behaviour of high purity UO{sub 2}/H{sub 2}O interfaces under helium beam irradiation in deaerated conditions; Comportement des interfaces UO{sub 2}/H{sub 2}O de haute purete sous faisceau d'ions He{sup 2+} en milieu desaere

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, E

    2005-11-15

    A question put within the framework of the nuclear fuel storage worn in geological site is what become to them in the presence of water. The aim of a fundamental program, of PRECCI project (ECA), is to highlight the behaviour of interfaces which can be used as models for the interfaces nuclear spent fuel/water if the fuel is uranium UO{sub 2} dioxide. This doctorate is interested in the effect of the alpha activity which is the only one that exist in the spent fuel after long periods. The aim is to identify the mechanisms of alteration and of leaching of surfaces under alpha irradiation. A method is developed to irradiate UO{sub 2}/H{sub 2}O interfaces in deaerated conditions with the beam of He{sup 2+} produced by a cyclotron. The He{sup 2+} ions cross an UO{sub 2} disc and emerge in water with an energy of 5 MeV. Leachings under irradiation are carried with a large range of particles flux. The post-irradiation characterization of the surface of the discs realised by micro-Raman spectroscopy allowed to identify the alteration layer. It is made up of studtite UO{sub 2}(O{sub 2}),4H{sub 2}O, and of schoepite UO{sub 3},xH{sub 2}O. The analysis of the solutions shows that the uranium release strongly increases. The electrochemical properties of the interfaces under irradiation strongly differ from those before irradiation. This work allows to propose that the radiolytic species seen by the interface are it during the heterogeneous phase of evolution of the traces and are species of short lives. Modeling show that the radiolytic radicals species can migrate toward the interface and react with the UO{sub 2} surface. (author)

  8. Lutte contre le Bremia de la laitue en pépinière et sous abri froid : compte-rendu d'essai 2005

    OpenAIRE

    Lambion, Jérôme

    2006-01-01

    Le mildiou de la laitue (Bremia lactucae) est la maladie la plus redoutée sur cette espèce, notamment en culture biologique d’hiver sous abris. En Provence, les dégâts sont très importants, parfois dès la pépinière, et entraînent de fortes pertes financières. Cette situation est due à deux facteurs principaux : d’une part au contournement récurrent des résistances génétiques par de nouvelles souches de Bremia (25 races déterminées à ce jour), et d’autre part à la faiblesse des méthodes de lut...

  9. Le pardon ou l’oubli ? La réhabilitation judiciaire en France sous la IIIe République : le cas d’Angers

    OpenAIRE

    Coltel, Antony

    2011-01-01

    La réhabilitation judiciaire constitue une forme essentielle du « pardon officiel » que la société française, sous la IIIe République, pouvait accorder aux anciens condamnés. La réhabilitation judiciaire s’applique à des condamnés ayant subi leur peine en bonne et due forme et non à des innocents injustement punis ayant obtenu la révision de leur procès. Il s’agit donc d’une mesure de pardon spécifique inaugurée par les codes napoléoniens, rétablissant le condamné dans ses droits et effaçant ...

  10. Processus d'innovation et recomposition des territoires agricoles : le cas du semis sous couvert végétal au nord du Cameroun

    OpenAIRE

    Dugué, Patrick; Olina Bassala, Jean-Paul

    2015-01-01

    Au nord du Cameroun, l'adoption des systèmes de culture sous couvert végétal (SCV) butte sur le partage des résidus de culture fourragers en saison sèche entre le bétail et la couverture du sol. Elle nécessite donc d'accroître l'offre fourragère et de prendre en compte les différents types d'élevage (villageois, semi-sédentaire, transhumant, etc.). Dans les conditions actuelles de pratique des SCV par les producteurs (faible couverture du sol, peu d'années successives en SCV) les effets atten...

  11. Identité hors territoire. Les élites espagnoles exilées en France sous la dictature de Primo de Rivera (1923-1930

    Directory of Open Access Journals (Sweden)

    Elvire Diaz

    2006-09-01

    Full Text Available Le territoire étant un point d’ancrage de l’identité individuelle et nationale, nous verrons dans ce travail si hors territoire, il peut y avoir préservation de l’identité, individuelle, collective, nationale, débouchant sur une dé-territorialisation, au sens défini par Gilles Deleuze. Notre objet d’étude portera sur le cas d’une micro-société hors territoire, les élites intellectuelles espagnoles exilées en France sous la dictature du Général Miguel Primo de Rivera (1923-1930.Le général Mig...

  12. Écrire dans la variante de l’autre : le cas de Sous les vents de Neptune de Fred Vargas

    Directory of Open Access Journals (Sweden)

    Nadine Vincent

    2014-04-01

    Full Text Available Pour tout auteur, choisir d’écrire dans une langue ou dans la variante d’une langue qui n’est pas la sienne représente un défi de taille. Nous nous intéresserons au roman Sous les vents de Neptune, de l’écrivaine française Fred Vargas, qui a situé une partie de son intrigue au Québec, sans maîtriser la notion de variation linguistique. En analysant les réactions des lecteurs européens et québécois, de même que les caractéristiques de la langue québécoise de Vargas, nous aborderons la question de l’impérialisme linguistique et de son anachronisme au xxie siècle.

  13. "Velvet":Sous-titrage de l'épisode 1 de la série de R. Campos et G.R. Neira

    OpenAIRE

    De Corte, Inès

    2017-01-01

    Sous-titrage du premier épisode de la série "Velvet" réalisée par R. Campos et G.R. Neira et produite par Bambú Producciones. Contextualisation de la série dans l'histoire et dans les jeux d'influences de l'industrie de la mode afin d'évaluer l'adaptation de la série et sa crédibilité historique. Commentaires de traduction expliquant le processus de traduction, la réflexion et la méthodologie employées. Master [120] en traduction, Université catholique de Louvain, 2017

  14. Modelling studies of the oxidation and auto-ignition of alkanes, aromatics, and their mixtures at high pressure between 600 and 1500 K: reduction of detailed mechanisms: measurements of the building up of soot; Etudes par modelisation de l'oxydation et de l'autoinflammation d'alcanes et d'aromatiques purs et de melanges a haute pression entre 600 et 1500 K: reduction de mecanismes detailles: mesure de la formation des suies

    Energy Technology Data Exchange (ETDEWEB)

    Saylam, A.

    2005-11-15

    The understanding and control of many combustion phenomena requires an interactive work between experiments and modelling. The presentation of the two coupled approaches is a prerequisite to demonstrate the complexity of the phenomena (Chapters I and II). This complexity often precludes from fully elucidating the details of the chemistry of hydrocarbon oxidations. Such a failure has been shown by an attempt to improve the mechanism of oxidation of iso-octane (Chapter III). Hundreds of species and thousands of reactions come into play during the oxidation of an hydrocarbon and they all must be included into the detailed mechanisms. The need for smaller mechanisms logically has led to devise a technique of reduction (Chapter IV). Predictive thermo-kinetic mechanisms have been built, reduced, and validated with new experimental data and data collected from previous work or published elsewhere (Chapter V). Laser diagnostic techniques have been used to measure soot particles and PAH inside a methane flame (Chapter VI). (author)

  15. Gazettes sous influence : le Courrier du Bas-Rhin, la Gazette des Deux-Ponts et les sujets touchant la Russie vers 1770

    Directory of Open Access Journals (Sweden)

    Georges Dulac

    2016-11-01

    Full Text Available Vers 1770, la campagne anti-russe du gouvernement français tend à dégrader l’image de la Russie, ce qui lèse gravement ses intérêts, notamment quand elle doit emprunter pour financer la guerre avec la Turquie. Aussi le prince Dmitri Alexeevitch Golitsyn, ministre plénipotentiaire à La Haye, se montre-t-il alors très actif sur ce terrain. Sa correspondance avec Pétersbourg témoigne de ses efforts, aux effets inégaux, pour influer sur les informations diffusées par quelques journaux : principalement le Courrier du Bas-Rhin, publié par Jean Manzon à Trèves, sous contrôle prussien, et dans une moindre mesure les deux Gazettes des Deux-Ponts, l’une politique, l’autre littéraire. Le journaliste de Trèves, qui trouve son intérêt à prendre le parti de la Russie, met en œuvre en sa faveur un discours journalistique abondant et parfois très élaboré. Cependant, la ligne du journal subit des fluctuations sensibles, selon l’évolution de la situation et à la suite de diverses interventions, dont celles du roi de Prusse et d’autre part de Stanislas-Auguste, qui pensionne un temps le journaliste. La Gazette des deux Ponts pratique l’information orientée avec plus de finesse, et, comme la gazette littéraire, accorde une large place à la matière russe : mais sur le plan politique, son traitement reste le plus souvent sous influence française et répond rarement aux vœux de D. A. Golitsyn.

  16. Comportement mécanique des tuyaux. Influence de la traction, de la pression et du poids linéique. Application aux risers Mechanical Behavior of Pipes and Risers. Influence of Tension, Pressure and Weight

    Directory of Open Access Journals (Sweden)

    Sparks C.

    2006-11-01

    Full Text Available L'influence de la traction, de la pression et du poids linéique sur le comportement d'un tuyau (ou d'un riser a déjà été traitée dans de nombreux articles. Malgré cela, elle est fréquemment mal comprise, ce qui a parfois de; conséquences sérieuses. Par souci de clarté, l'approche de cet article est délibérément très élémentaire. Les problèmes principaux de la flexion, du flambage, de l'allongement et de la contrainte limite, qui sont souvent traités dans des articles différents, sont ici étudiés ensemble d'une façon homogène. On présente des interprétation: physiques, faciles à visualiser, des deux concepts de tension effective et de contrainte effective, dont l'utilisation est très répandue, ainsi que leur rapport avec des notions analogues dans d'autres domaines de l'art de l'ingénieur. La puissance de ces deux concepts est démontrée à la fin de l'article où ils sont utilisés pour résoudre huit problèmes divers. The influence of tension, pressure, and weight on different aspects of pipe and riser behavior has already been the subject of many articles (see references. In spite of this it has frequently been misunderstood, sometimes with serious consequences. The object of this payer is to explain the subject clearly and the approach is therefore deliberately very elementary. The principal problems of bending, buckling, yielding and strains, usually treated in separated papers, are here treated homogeneously. The widely used concepts of effective tension and effective stress are given interpretations, easy to visualise, which are related to analogous concepts in other engineering fields. Finally, eight diverse particular examples of the influence of tension, pressure and weight on pipe and riser behavior, are discussed.

  17. The Meuse-Haute Marne underground research laboratory. A scientific research tool for the study of deep geologic disposal of radioactive wastes; Le Laboratoire de Recherche souterrain de Meuse/Haute-Marne. Un outil de recherche scientifique pour etudier le stockage geologique profond de dechets radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The Meuse-Haute Marne underground research laboratory, is an essential scientific tool for the achievement of one of the ANDRA's mission defined in the framework of the law from December 30, 1991 about the long-term management of high-level and long-living radioactive wastes. This document presents this laboratory: site characterization, characteristics of the Callovo-Oxfordian clay, and laboratory creation, coordinated experiments carried out at the surface and in depth, and the results obtained (published in an exhaustive way in the 'Clay 2005' dossier). (J.S.)

  18. Mécanismes de la non-stœchiométrie dans les nouveaux supraconducteurs à haute Tboldmath_c

    Science.gov (United States)

    Hervieu, M.; Michel, C.; Martin, C.; Huvé, M.; van Tendeloo, G.; Maignan, A.; Pelloquin, D.; Goutenoire, F.; Raveau, B.

    1994-11-01

    Two new families of high T_c superconductors have been recently discovered : ll the mercury based oxides gg and the ll oxycarbonates gg. The main characteristics of the structural mechanisms were studied by high resolution electron microscopy. This paper deals with the description of the numerous order-disorder phenomena which have been observed on the cation and anion networks. Deux nouvelles familles de supraconducteurs ont récemment vu le jour : ll les oxydes à base de mercure gg et les ll oxycarbonates gg. Les caractéristiques essentielles des mécanismes structuraux ont été étudiées par microscopie électronique haute résolution. Les nombreux phénomènes ordre-désordre observés tant sur le réseau des cations que sur celui des anions sont exposés.

  19. The Cigeo project, Meuse/Haute-Marne reversible geological disposal facility for radioactive waste. Project Owner File, Public debate of 15 May to 15 October 2013

    International Nuclear Information System (INIS)

    Dupuis, Marie-Claude; Gonnot, Francois-Michel

    2013-07-01

    Andra is exploring several options for the disposal of low-level long-lived waste (LLW-LL). With the French Government's approval, in June 2008 Andra began looking around France for a site to build an LLW-LL repository. In late 2008 it provided the Government with a report analysing the geological, environmental and socio-economic aspects of the forty odd municipalities that expressed an interest in the project. After the withdrawal of the two municipalities chosen in 2009 to conduct geological investigations, the government asked Andra to re-explore the various management options for graphite and radium-bearing waste, focusing in particular on ways to manage these types of waste separately. The High Committee for Transparency and Information on Nuclear Safety (HCTISN) created a working group to provide feedback on the search for a site for LLW-LL. Andra submitted a report to the Government in late 2012. This report contains proposals for continuing the search and draw in particular on the HCTISN's recommendations. Contents: 1 - Radioactive waste (Sources, Types, Management, Waste to be disposed of at Cigeo, Cigeo's estimated disposal capacities, Where IS HLW and ILW-LL being stored until Cigeo is commissioned? 2 - Why deep geological disposal? (A 15-year research programme, Presentation and assessment of the research results, The public debate of 2005-2006, Deep geological disposal ratified by the 2006 Planning Act, The 2006 Planning Act: other areas of research complementary to deep geological disposal, The situation in other countries); 3 - Why the Meuse/Haute-Marne site? (Selection of the Meuse and Haute-Marne site to host an underground research laboratory, The geological formation in the Meuse and Haute-Marne site, Callovo-Oxfordian clay, Siting of Cigeo's installations); 4 - How will Cigeo operate? (The installations at Cigeo, Construction of Cigeo, Transport of waste packages, Operation of Cigeo, Closure of Cigeo); 5 - Safety at Cigeo

  20. Caractérisation de la croissance spatiale urbaine de la ville de Lubumbashi (Haut-Katanga, R.D. Congo entre 1989 et 2014

    Directory of Open Access Journals (Sweden)

    Sikuzani, YU.

    2018-01-01

    Full Text Available Characterization of the Spatial Urban Growth of the city of Lubumbashi (Haut-Katanga, D.R. Congo between 1989 and 2014. A quantification of the spatio-temporal dynamics of urbanization is crucial to apprehend urban morphology and its ecological effects, in order to support sustainable urban planning. This study aimed at understanding the spatial urban growth of Lubumbashi city based on the analysis of six SPOT satellites images. With the exception of the 1996-2002 period, Lubumbashi city underwent a high average annual growth rate exceeding that observed for other cities in sub-Saharan Africa. Between 1989 and 2014, the built-up percentage increased from 6 % to 20 %. Our results suggest that the urbanization of Lubumbashi city followed a complex diffusion-coalescence model. The main reason of this perturbation is the combination of the rapid demographic growth with an inappropriate urban growth management.

  1. U-Pb dating on zircons for the la Borie eclogite (Haut-Allier, France) and consequences for the pre-Variscan evolution of the Western Europe

    Energy Technology Data Exchange (ETDEWEB)

    Ducrot, J.; Lancelot, J.R. (Montpellier-2 Univ., 44 (France). Lab. de Geochimie-Isotopique); Marchand, J. (Nantes Univ., 34 (France). Lab. de Petrologie et Minerologie)

    1983-03-01

    A crystallization age of 432sub(-10)/sup +20/Ma has been determined for the 'La Borie' eclogite (Haut-Allier, France), by U-Pb dating on zircons. This age is yielded by the upper intercept with the Concordia curve. In agreement with recent dates obtained in the southern part of the Massif Central, in Brittany and in Vendee, these data indicate that the high-pressure/high-temperature-metamorphic phase representative of the pre-Variscan evolution of the western Europe, took place at the Silurian/Ordovician boundary. This high-pressure/high-temperature metamorphism could be significant of subduction processes more or less synchronous, preceeding the main continental collision responsible of the Variscan belt.

  2. The Penly nuclear power plant, at the service of a safe, competitive and CO2-free power generation in the heart of the Haute Normandie region

    International Nuclear Information System (INIS)

    2010-01-01

    In less than 20 years, Electricite de France (EDF) has built up a competitive park of 58 nuclear power plants, with no equivalent elsewhere, which represents an installed power of 63.1 GW (85% of EDF's power generation). Inside this nuclear park, the national power generation centre of Penly comprises 2 production units of 1300 MW each (2600 MW as a whole). The facility generated 18.5 billion kWh in 2009, i.e. 3.57% of the French national power generation and 80% of the energy consumed in the Haute-Normandie region. This brochure presents the life of the power plant under various aspects: power generation, safety priority and culture, maintenance investments, respect of the environment, long-term fuel and wastes management, local economical involvement, transparency and public information, key figures and dates. (J.S.)

  3. U-Pb dating on zircons for the la Borie eclogite (Haut-Allier, France) and consequences for the pre-Variscan evolution of the Western Europe

    International Nuclear Information System (INIS)

    Ducrot, J.; Lancelot, J.R.; Marchand, J.

    1983-01-01

    A crystallization age of 432sub(-10) +20 Ma has been determined for the 'La Borie' eclogite (Haut-Allier, France), by U-Pb dating on zircons. This age is yielded by the upper intercept with the Concordia curve. In agreement with recent dates obtained in the southern part of the Massif Central, in Brittany and in Vendee, these data indicate that the high-pressure/high-temperature-metamorphic phase representative of the pre-Variscan evolution of the western Europe, took place at the Silurian/Ordovician boundary. This high-pressure/high-temperature metamorphism could be significant of subduction processes more or less synchronous, preceeding the main continental collision responsible of the Variscan belt. (s.s.). (orig.)

  4. Mais qui a attrapé le bison de Higgs ? ... et autres questions que vous n'avez jamais osé poser à haute voix

    CERN Document Server

    Louapre, David

    2015-01-01

    Les premiers hommes, le Big-Bang et le boson de Higgs vous intriguent ? Vous fourmillez de questions sans toujours oser les poser à haute voix ? Ce livre est fait pour vous ! Laissez le créateur de la chaîne YouTube "Science étonnante" (près de 100 000 abonnés) vous révéler ses découvertes préférées. Vous n'avez qu'une vague idée de ce qu'est un atome ? Un gène ? Une probabilité ? Embarquez, vous en savez bien assez !

  5. Etude expérimentale du séchage convectif à haute température d'un milieu granulaire

    OpenAIRE

    Messai , Souad; Sghaier , Jalila; Lecomte , Didier; Belghith , Ali

    2008-01-01

    International audience; Dans ce travail on présente une étude expérimentale et numérique du séchage convectif à haute température d'un milieu granulaire formé par des particules poreuses sphériques. La partie expérimentale a été consacrée à l'utilisation de l'air humide comme agent séchant. En prenant deux valeurs d'humidité relative de l'air, nous avons mis en évidence l'importance de ce paramètre sur le processus du séchage. Nous avons mesuré simultanément la cinétique de séchage du lit fix...

  6. Monitoring and surveillance of former uranium sites in Haute-Vienne (France): main outcomes of the review of a ten-year environmental report

    International Nuclear Information System (INIS)

    Gallerand, Marie-Odile; Gay, Didier; Andres, Christian

    2008-01-01

    For more than 50 years, more than 200 sites were prospected and mined to extract uranium in France. Haute-Vienne, in the Midwest of the country, played a leading position. Up to the present, rehabilitation of the sites is nearly complete and surveillance is the way of assessing its efficiency. In 2003, AREVA NC was asked to produce a report presenting the results of the ten-year (1994-2003) monitoring and surveillance of the rehabilitated sites and their environment. In 2006, the Institute of Radioprotection and Nuclear Safety (IRSN) was asked to perform the technical review of this report. This review led IRSN to recommend actions to improve the monitoring systems and minimise discharges to the environment. Results and recommendations were presented to and discussed with the pluralistic expert group (GEP) created in 2006 by the French ministries of environment, health and industry. (author)

  7. A high current high frequency ions gun; Etude et realisation d'un canon a ions du type haute frequence a debit eleve

    Energy Technology Data Exchange (ETDEWEB)

    Coutant, J; Prevot, F; Vienet, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-07-01

    A 10 mA protons gun has been developed for different purposes. The first part of the report studies the plasma production with a RF electromagnetic field. Then the ion extraction process is analysed with particular reference to space charge phenomena. The last part describes a three electrode electrostatic lens which focusses the beam. (author) [French] Un canon a ions capable de delivrer un faisceau de protons d'une intensite de l'ordre de 10 mA a ete developpe pour differents usages. Dans la premiere partie les problemes relatifs a la production et a l'entretien d'un plasma excite par un champ electromagnetique de haute frequence sont exposes. Ensuite les auteurs analysent le mecanisme de l'extraction des ions et montrent en particulier le role de la charge d'espace. Enfin on decrit un dispositif de focalisation electrostatique a 3 electrodes. (auteur)

  8. Developpement d'une methode calorimetrique de mesure des pertes ac pour des rubans supraconducteurs a haute temperature critique

    Science.gov (United States)

    Dolez, Patricia

    Le travail de recherche effectue dans le cadre de ce projet de doctorat a permis la mise au point d'une methode de mesure des pertes ac destinee a l'etude des supraconducteurs a haute temperature critique. Pour le choix des principes de cette methode, nous nous sommes inspires de travaux anterieurs realises sur les supraconducteurs conventionnels, afin de proposer une alternative a la technique electrique, presentant lors du debut de cette these des problemes lies a la variation du resultat des mesures selon la position des contacts de tension sur la surface de l'echantillon, et de pouvoir mesurer les pertes ac dans des conditions simulant la realite des futures applications industrielles des rubans supraconducteurs: en particulier, cette methode utilise la technique calorimetrique, associee a une calibration simultanee et in situ. La validite de la methode a ete verifiee de maniere theorique et experimentale: d'une part, des mesures ont ete realisees sur des echantillons de Bi-2223 recouverts d'argent ou d'alliage d'argent-or et comparees avec les predictions theoriques donnees par Norris, nous indiquant la nature majoritairement hysteretique des pertes ac dans nos echantillons; d'autre part, une mesure electrique a ete realisee in situ dont les resultats correspondent parfaitement a ceux donnes par notre methode calorimetrique. Par ailleurs, nous avons compare la dependance en courant et en frequence des pertes ac d'un echantillon avant et apres qu'il ait ete endommage. Ces mesures semblent indiquer une relation entre la valeur du coefficient de la loi de puissance modelisant la dependance des pertes avec le courant, et les inhomogeneites longitudinales du courant critique induites par l'endommagement. De plus, la variation en frequence montre qu'au niveau des grosses fractures transverses creees par l'endommagement dans le coeur supraconducteur, le courant se partage localement de maniere a peu pres equivalente entre les quelques grains de matiere

  9. Water flow in the Oxfordian and Dogger limestone around the Meuse/Haute-Marne underground research laboratory

    International Nuclear Information System (INIS)

    Linard, Y.; Vinsot, A.; Delay, J.; Scholz, E.; Lundy, M.; Garry, B.; La Vaissiere, R. de; Cruchaudet, M.; Dewonck, S.; Vigneron, G.; Vincent, B.; Wechner, S.

    2010-01-01

    Document available in extended abstract form only. Within its scientific program to study the feasibility of a high level radioactive waste disposal in the Callovo-Oxfordian argillaceous rock (COx) of the eastern Paris Basin, Andra has conducted an extensive characterization of the Oxfordian and Dogger limestone formations above and below the COx. More than 35 wells ranging from 400 to 700 meters deep were drilled over 15 years to study a 400 km 2 area around the Andra's Meuse / Haute-Marne Underground Research Laboratory (URL). An original methodology was applied in these wells to characterize the geology, the hydrogeology and the geochemistry of the Jurassic carbonates. This multidisciplinary effort provided a unique set of 3D data. The first purpose of this study is to integrate the geological, hydrogeological and geochemical data into a water flow conceptual model. Geological data include the study of cored wells, complete modern wire-line log sets in both cored and un-cored wells, and outcrop analogues. Hydrogeological data include transmissivity and hydraulic head measurements in the Oxfordian and Dogger limestone formations. Geochemical data include several on site measurements (pH, alkalinity, electrical conductivity, temperature) and chemical and isotopic analyses performed on water samples taken at selected depths. More than one hundred hydraulic tests have been performed since 1994 to measure transmissivity distribution in the Oxfordian and Dogger limestone. Several hydraulic testing methods were used in each well: global pumping tests, fluid logging tests, thermal flow logging tests and packer tests. After completion of the hydraulic tests, hydraulic heads were deduced from long term pressure measurements in open wells or in multi-packer completions; pressure monitoring lasted between a few months and more than 10 years. Long term/high volume pumping tests were also performed after the hydraulic tests to obtain a stationary composition of the well

  10. Artificial snowmaking and potential water conflicts in mountain resorts. The case of Avoriaz (Haute-Savoie, France)

    Science.gov (United States)

    Magnier, E.; Reynard, E.

    2012-04-01

    The practice of artificial snowmaking is recent (1990s), and may use large volumes of water. In the French Alps, the total consumption is on average 20 Mm3 per year (Miquel, 2003), which corresponds to the annual consumption of drinking water for a city of more than 300,000 inhabitants such as Nice (France). Moreover, snowmaking does not represent the only use of water in winter sport resorts. The available water resource is used for drinking water, artificial snowmaking and leisure activities (swimming pools, golf spas). One can speak in this context of a multifunctionality of the resource. Of particular concern is the winter season when streams reach their lowest level (from December to April). These activities require that water is drawn from resources created at other times of the year. Water for snowmaking production is pumped from drinking water reservoirs, rivers, groundwater tables, artificial hydropower reservoirs, as well as from hill water reservoirs, specifically built for storing water for snow production, themselves supplied from surface water capture. In Avoriaz (Haute-Savoie, France) the risk of shortages is important. The reason is that the resort is supplied by a unique lake or hillside reservoir (Lake 1730), which satisfies two particularly high-consuming water uses (the water supply for production of snow and drinking water). On a finer scale, namely that of a single day in January 2011, considerable volumes are drawn off in the space of a few hours (10,114 m3 on 24 January), while pumping for drinking water spreads out over several months. Intensity of use for the production of snow can trigger water scarcity and water conflicts with other uses such as drinking water. Good management of the resource is, therefore, especially important. However, no legislation specific to artificial snowmaking has been established. Even if, at present, there is no situation involving shortages and conflicting uses at Avoriaz, the situation needs to be monitored

  11. Prediction under Uncertainty on a Mature Field Prévision de production sous incertitude pour un champ mature

    Directory of Open Access Journals (Sweden)

    Feraille M.

    2012-04-01

    uses Gaussian process modeling and an adaptive design strategy. In the final step of the workflow, parametric response surfaces are used to approximate the reservoir production forecasts and obtain their probabilistic distribution by propagating the remaining posterior uncertainty of input parameters. Dans le cadre de l’ingénierie de réservoir, des simulateurs permettent de comprendre et prédire le déplacement des fluides dans le réservoir et ainsi d’optimiser son exploitation. Ces simulateurs prennent en entrée un grand nombre de paramètres qui peuvent être entachés d’incertitudes. Afin d’assurer une production future correcte, la comparaison des différents scénarios d’exploitation possibles doit tenir compte de ces incertitudes. Les prévisions de production ne doivent pas être évaluées en ne considérant qu’un seul cas « moyen » pour chaque scénario mais en intégrant l’incertitude sur les paramètres d’entrée. Dans le cadre de champ mature où un historique de production est disponible, le formalisme Bayésien est bien adapté pour répondre au problème des prédictions sous incertitudes. En effet, il permet de définir les incertitudes, dites a posteriori, sur les entrées du modèle de réservoir en prenant en compte à la fois les données statiques et dynamiques. Ces incertitudes a posteriori peuvent ensuite être propagées afin de calculer des prévisions de production probabilistes pour chaque scénario, tout en respectant la connaissance statique et dynamique du réservoir. Mais l’obtention des incertitudes a posteriori ainsi que la propagation de celles-ci sur les prévisions de production nécessitent un nombre souvent prohibitif de simulations du modèle réservoir. Dans cet article, nous proposons une application de plusieurs techniques statistiques avancées afin de prendre en compte les incertitudes dans les prévisions de production pour un champ mature et ce en utilisant un nombre raisonnable de simulations. Le

  12. Méthode simplifiée de formulation d’un béton à haute performance avec et sans fibre métallique

    Directory of Open Access Journals (Sweden)

    Hadj Sadok Ahmed

    2014-04-01

    Full Text Available Le présent travail, propose une méthodologie simplifiée, s’appuyant sur des méthodes de formulation de béton connues dans la littérature et sur des essais d’optimisations au laboratoire, permettant la détermination d’une composition d’un béton à haute performance « BHP » et de béton de fibre à haute performance « BFHP ». Pour ce faire, une large caractérisation (physique et mécanique des matériaux utilisés a été conduite. Suivie d’une étude préliminaire, ayant pour objectif d’optimiser le dosage en Superplastifiant (0,65-1% et du ciment (500-700 kg/m3 en se basant sur des essais de résistance à la compression (3, 7, 28 jours et des mesures d’ouvrabilité. Les caractéristiques mécaniques ainsi que la porosité du BHP optimale ont été mesurées. Ainsi, l’effet d’une nouvelle génération de superplastifiant, qui a permis la réduction du rapport E/C à 0,29, a pu être examiné. Ce dernier a permis l’obtention d’un BHP de bonne performance mécanique et de faible porosité. La méthodologie proposée a permis, à ce stade de l’étude, de formuler des bons BHP et reste à ajuster et à compléter pour la formulation des BFHP.

  13. Evolution de la perméabilité d'agrégats de sels sous contrainte liée à des circulations de fluides : dissolution, colmatage, déformation

    OpenAIRE

    Chen , Tao

    1994-01-01

    Le but de ce travail est d'étudier l'évolution de la perméabilité d'agrégats de sels sous contrainte lorsque les fluides circulant dans ces agrégats peuvent réagir avec le solide par des dissolutions et/ou des colmatages. Des essais de circulation de divers fluides à travers des échantillons de briques de sels sous contrainte ont permis de suivre l'évolution de la composition des fluides en cours d'essai. L'évolution des matériaux a été aussi caractérisée en cours d'essai (mesure de vitesse a...

  14. Effet de pratiques de fertilisation azotée sur la sensibilité d’une culture de tomate à l’oïdium et la pourriture grise en conditions de production sous serre.

    OpenAIRE

    Ozayou, Saddik

    2011-01-01

    L’azote est le principal élément nutritif utilisé pour le contrôle des maladies aériennes sous abris. Dans ce stage, nous avons étudié l’effet de trois régimes de fertilisation azotée (4 mmoles/L, 8 mmoles/L et 16 mmoles/L) sur la physiologie de la plante et la sensibilité de la tomate à l’Oidium neolycopersici et à Botrytis cinerea en conditions de production sous serre. Pour ce faire, nous avons inoculé différents organes aériens des plantes dans la serre ou au laboratoire de l’INRA d’Alény...

  15. Effect of Grapefruit Seed Extract on Thermal Inactivation of Listeria monocytogenes during Sous-Vide Processing of Two Marinated Mexican Meat Entrées.

    Science.gov (United States)

    Valenzuela-Melendres, Martin; Peña-Ramos, E Aida; Juneja, Vijay K; Camou, Juan Pedro; Cumplido-Barbeitia, German

    2016-07-01

    D- and z-values for Listeria monocytogenes were obtained for two Mexican meat entrées: pork meat marinated in tomatillo (green tomato) sauce (PTS) and beef marinated in a red chili sauce (BRCS), with addition of 0, 200, and 800 ppm of grapefruit seed extract (GSE). Meat samples inoculated with L. monocytogenes were packaged in sterile bags, immersed in a water bath, and held at 55, 57.5, 60, and 62.5°C for different periods of time. Depending upon the temperature, D-values at 0 ppm of GSE ranged from 26.19 to 2.03 min in BRCS and 26.41 to 0.8 min in PTS. Adding 800 ppm of GSE to BRCS thermally treated at 55 and 62.5°C significantly decreased inactivation time by 35%. A reduction in time of 25.9, 10.6, and 40.1% at 55, 57.5, and 60°C, respectively, was observed in PTS with 800 ppm of GSE. The z-values of L. monocytogenes were not significantly affected by GSE addition; average z-values were 7.25 and 5.09°C for BRCS and PTS, respectively. Estimated thermal lethality for a 7-D log reduction of L. monocytogenes under commercial-size sous-vide conditions at a reference temperature of 55°C was reached at 78 and 71 min for BRCS without and with 800 ppm of GSE, respectively. For PTS, 7-D reduction was attained at 69 and 61 min without and with addition of 800 ppm of GSE, respectively. Supplementing both Mexican meat entrées (BRCS and PTS) with 800 ppm of GSE rendered L. monocytogenes cells more sensitive to the lethal effect of heat. The results of this study will assist the retail food industry in designing acceptance limits on critical control points pertaining to cooking regimes to effectively eliminate L. monocytogenes in BRCS and PTS sous-vide processed Mexican meat entrées.

  16. Ejemplos de represión contra comunistas españoles y franceses en 1939 en el centro-oeste de Francia (departamento de la Haute-Vienne

    Directory of Open Access Journals (Sweden)

    Eva Leger

    2010-11-01

    Full Text Available La Haute-Vienne acogió en febrero de 1939 a más de 2.700 civiles españoles refugiados en Francia. Se trata de un departamento esencialmente rural, excepto la capital, conocida por su tradición obrera muy fuerte. Esta tierra fue bastante hospitalaria para los españoles, a pesar de los ataques de la prensa de derecha, entreteniendo el mito del “rojo” español. Entonces, los refugiados fueron objeto de una estricta vigilancia por parte del Estado francés (gobierno Daladier. Se impidió todo tipo de contacto entre los comunistas españoles y franceses, en un contexto de repatriaciones, a veces forzadas, hacia la España franquista. En este artículo, me propongo presentar algunos casos de represión contra los españoles y contra los comunistas, a partir de informes policiales o prefectorales de la Haute-Vienne.Palabras Claves: memoria histórica; exilio; republicanos; Francia; Guerra Civil española___________________________ABSTRACT:In February 1939, Haute-Vienne department accommodated more than 2700 spanish civilians’ refugees.  This department is mainly rural except the capital where there is a strong working class tradition. This land was in general welcoming for refugees, in spite of the attacks of conservative press, which maintained the myth of the “red spanish”. Thus, Spanish refugees were under a strong surveillance by the French state (the Daladier’s government. Any contact between Spanish communists and French was avoided, in a context of repatriation, sometimes forced, back to pro-Franco Spain. This article will present some cases of repression against Spanish and communists that appear in reports from the police and the prefecture of the Haute-Vienne.Keywords: France, Spanish Civil War, exile, historical memory

  17. Geological investigations contributing to the hydrogeological conceptual model in the Meuse/Haute-Marne area, Eastern France

    International Nuclear Information System (INIS)

    Rocher, M.; De Hoyos, A.; Hibsch, C.; Viennot, P.

    2010-01-01

    Callovian-Oxfordian (COX) indurated clay formation is currently studied by Andra in the 'Meuse/Haute-Marne' (MHM) area for hosting a potential repository of high level, long-lived radioactive waste. IRSN is conducting studies in support of the safety evaluation of the geological disposal programme developed by Andra. IRSN, in collaboration with the Paris School of Mines, develops conceptual and numerical models of the underground water flows throughout the Paris sedimentary basin. The calibrated numerical model correctly represents the hydraulic heads and water salinities collected throughout the basin. At the MHM scale however, several flow patterns can still reproduce the measured heads, some of them assuming specific flow pathways along regional tectonic trends. Considering or not such tectonic trends in the model has however an impact on the estimated radionuclide transfer times to the outlets. Even though most ANDRA and IRSN geochemical analyses suggest a dominant diffusive transport across the COX between the underlying Dogger and overlying Oxfordian aquifers, few data point out the possible existence of local vertical connections across major tectonic structures. In order to select the most plausible options for the numerical modelling, IRSN compiled published studies and carried out fieldwork analysis to provide new data for its hydrogeological conceptual model. Relevant geological data can be considered both at the kilometre scale and at the metre scale. At the kilometre scale, the litho-stratigraphic scheme both for Dogger and Oxfordian series had previously been documented in the MHM area. Regional sedimentologic and diagenetic models are available for the Oxfordian aquifer and partially for the Dogger aquifer. Our fieldwork analysis complete these models thanks to new correlations pointed out during detailed iso-hyps mapping performed by G2R laboratory, southeast from the MHM area. Unlike the Kimmeridgian and COX sedimentary piles, which are

  18. Study of some ion exchange minerals which can be used in water at high temperature; Etude de quelques echangeurs mineraux utilisables dans l'eau a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Hure, J; Platzer, R; Bittel, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Fourre, J [Societe le Carbone Lorraine, 75 - Paris (France); Wey, R [Faculte des Sciences de Strasbourg, Lab. de Mineralogie, 67 (France)

    1958-07-01

    these impurities (that is to say capable of de-mineralizing polluted water). This paper describes the preliminary results of the investigation. (author) [French] L'etude de l'utilisation des echangeurs d'ions a haute temperature a ete essentiellement faite en vue de l'epuration de l'eau des reacteurs. On connait l'interet qu'il y a a garder dans un circuit de reacteur de l'eau de tres haute resistivite (plusieurs centaines a quelques millions {omega}.cm): abaissement de la corrosion, abaissement du taux de radiolyse, abaissement de la radioactivite des circuits et canalisations, les elements autres que les constituants de l'eau transportes par celle-ci devenant generalement radioactifs par leur passage au coeur du reacteur. Si la circulation d'eau se fait a des temperatures inferieures a 45 deg. C, les resines echangeuses d'ions organiques utilisees en lit melange resolvent tres bien le probleme de l'epuration en continu. Par contre, pour des temperatures plus elevees surtout au-dessus de 100 deg. C, leur utilisation n'est pas possible, la degradation de ces hauts polymeres etant tres rapide. De meme, l'action des rayonnements, par exemple ceux des produits fixes par les echangeurs d'ions, detruit irremediablement les chaines organiques constituant le squelette de ces echangeurs. Nous avons donc cherche d'es composes pouvant assurer une bonne deionisation de l'eau, mais de structures telles qu'elles ne soient pas deteriorees par l'action de la temperature et des rayonnements. Nous nous sommes particulierement orientes dans trois voies: - echangeurs d'ions naturels a structure minerale (argile du type montmorillonite), - composes mineraux naturels traites pour leur conferer les proprietes d'echangeurs d'ions (charbons actives), - composes mineraux synthetiques (sels tres peu solubles, phosphate et hydroxyde de zirconium et de thorium). Dans ces etudes, nous nous sommes attaches a obtenir des produits stables en presence d'eau a haute temperature, tres insolubles et non

  19. Comparison of single and dual continuum representations of faults and fractures for simulating groundwater flow and solute transport in the Meuse/Haute-Marne aquifer system

    International Nuclear Information System (INIS)

    McLaren, R.; Sudicky, E.; Therrien, R.; Benabderrahmane, H.

    2010-01-01

    Document available in extended abstract form only. The Paris Basin system covers approximately 200 000 km 2 and consists of 27 aquiferous and semipermeable (aquitard) hydrogeological units of Trias to Quaternary age that are intersected by 80 regional faults. The Meuse/Haute-Marne site is located in the eastern part of the Paris Basin and covers approximately 250 km 2 . Within the sector, the Callovo-Oxfordian clay formation is a potential host for the French high and intermediate level and long lived radioactive waste. It is located at a mean depth of 500 m and has a minimum thickness of 130 m and very low hydraulic conductivity, on the order of 10-14 m/s. The Callovo-Oxfordian is confined between the overlying Oxfordian aquifer and the underlying Dogger aquifer. Both the Oxfordian and Dogger are limestone aquifers characterized locally by macro-pores, regional faults that oriented along the N40 deg. E direction (the Gondrecourt and Joinville faults) and the N150 deg. E direction (the Marne and Poissons faults), as well as diffuse fracture zones located south west of the Meuse/Haute-Marne Repository site. To support site investigation of the Meuse/Haute-Marne underground repository, a single continuum multi-scale hydrogeological model of the Paris Basin and the Meuse/Haute-Marne sector has been developed. The model represents 27 hydrogeological units at the scale of the Paris Basin, and it is refined at the scale of the sector to represent 27 different layers that range in age from the Trias to the Portlandian. The model has been calibrated to observed hydraulic heads by varying the hydraulic conductivity of the individual layers, using a single continuum approach. To investigate the impact of treating the two confining layers for the clay formation, the Oxfordian and Dogger aquifers, as single continua with equivalent hydraulic properties for the combined fracture and matrix system, additional simulations have been conducted with either a dual continuum or

  20. L'interdépendance entre les sous-systèmes conjugal et parental: une analyse personne-processus-contexte

    Directory of Open Access Journals (Sweden)

    Bigras Marc

    2000-01-01

    Full Text Available Dans le présent article nous étudions les mécanismes de transmission des difficultés socioaffectives entre les systèmes conjugal et parental sous l'effet d'une part de stress contextuels comme la pauvreté des familles et, d'autre part, des caractéristiques personnelles des membres de ces familles comme le sexe et l'âge de l'enfant. Un échantillon de couples avec ou sans enfant permet dans une première étude d'estimer l'impact de la présence de l'enfant sur le couple alors que deux autres études posent la question complémentaire de l'impact du couple sur l'enfant. Les résultats de ces études contribuent à démontrer l'interdépendance entre le couple et l'enfant alors que chaque membre de la famille peut-être une source d'influence sur les autres. Nous argumentons qu'une réponse aversive à des problèmes extrafamiliaux favorise des stress intrafamiliaux mais que cela se révèle surtout selon les caractéristiques des membres de la famille.

  1. Critical and sub-critical experiments on U-BeO lattices; Experiences critiques et sous-critiques sur reseaux U-BeO

    Energy Technology Data Exchange (ETDEWEB)

    Benoist, P.; Gourdon, Ch.; Martelly, J.; Sagot, M.; Wanner, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Deniz, V.; Joshi, B.V.; Sahai, K. [Atomic Energy Establishment Trombay (India)

    1958-07-01

    Sub-critical experiments have allowed us to measure the material buckling of uranium natural oxide of beryllium lattices with a grid of 15 cm, and made up of uranium bars measuring 2.60 - 2.92 - 3.56 and 4.40 cm of diameter. A critical experiment has then been conducted with hollow 1.35 per cent enriched uranium bars. A study of U-BeO 18.03 cm grid lattices is at present being conducted. (author)Fren. [French] Nous avons mesure par des experiences sous-critiques le laplacien matiere de reseaux uranium naturel-oxyde de beryllium, dont la maille carree a un pas de 15 cm, realises avec des barreaux d'uranium de diametres 2,60 - 2,92 - 3,56 - 4,40 cm. Une experience critique a ete faite ensuite avec des barres creuses d'uranium enrichi a 1,35 pour cent; l'etude des reseaux U-BeO de pas 18,03 cm est actuellement en cours. (auteur)

  2. Effects of sous-vide method at different temperatures, times and vacuum degrees on the quality, structural, and microbiological properties of pork ham.

    Science.gov (United States)

    Jeong, Kiyoung; O, Hyeonbin; Shin, So Yeon; Kim, Young-Soon

    2018-04-10

    This study evaluated the influence of different factors on pork hams cooked by sous-vide method. The quality and structural and microbiological properties of the treated samples were compared with those of controls. Samples were subjected to treatment at different combinations of temperature (61 °C or 71 °C), time (45 or 90 min), and vacuum degree (98.81% or 96.58%). The control sample was air packaged and boiled for 45 min in boiling water. Temperature and vacuum degree affected quality properties, while the effect of time was limited. Samples cooked at 61 °C showed higher moisture content, redness, and pink color of the meat juice, whereas samples cooked at 71 °C showed higher cooking loss rate, lightness, and volatile basic nitrogen values. Texture analysis indicated tenderer meat for the treatment group than the control. No microbial growth was detected in any treatment groups. Meat cooked at 61 °C and 98.81% vacuum showed more spacious arrangement of meat fiber. Copyright © 2018 Elsevier Ltd. All rights reserved.

  3. Critical and sub-critical experiments on U-BeO lattices; Experiences critiques et sous-critiques sur reseaux U-BeO

    Energy Technology Data Exchange (ETDEWEB)

    Benoist, P; Gourdon, Ch; Martelly, J; Sagot, M; Wanner, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Deniz, V; Joshi, B V; Sahai, K [Atomic Energy Establishment Trombay (India)

    1958-07-01

    Sub-critical experiments have allowed us to measure the material buckling of uranium natural oxide of beryllium lattices with a grid of 15 cm, and made up of uranium bars measuring 2.60 - 2.92 - 3.56 and 4.40 cm of diameter. A critical experiment has then been conducted with hollow 1.35 per cent enriched uranium bars. A study of U-BeO 18.03 cm grid lattices is at present being conducted. (author)Fren. [French] Nous avons mesure par des experiences sous-critiques le laplacien matiere de reseaux uranium naturel-oxyde de beryllium, dont la maille carree a un pas de 15 cm, realises avec des barreaux d'uranium de diametres 2,60 - 2,92 - 3,56 - 4,40 cm. Une experience critique a ete faite ensuite avec des barres creuses d'uranium enrichi a 1,35 pour cent; l'etude des reseaux U-BeO de pas 18,03 cm est actuellement en cours. (auteur)

  4. Groundwater flows in Meuse/Haute-Marne aquifer system and the importance of the evolution of the geomorphology over the next million of years

    International Nuclear Information System (INIS)

    Holmen, J.; Benabderrahmane, H.; Brulhet, J.

    2012-01-01

    Document available in extended abstract form only. A clay-stone formation of Callovo-Oxfordian age is found throughout the multilayered sedimentary fill of the Paris Basin. It is considered as a potential host rock for France's high and intermediate-level long-lived radioactive waste. The Callovo-Oxfordian layer is located between an overlying limestone of Oxfordian age and an underlying limestone of Dogger age.. The Meuse/Haute-Marne sector area is located in the East of France, the area includes the Bure investigation site and a domain referred to as the 'transposition zone' selected as a suitable location for France's high- and intermediate-level long-lived radioactive waste The objective of the study was to estimate how the groundwater flow in the Meuse/Haute- Marne aquifer system will change because of the geomorphologic evolution over the next 1 million of years. The future groundwater flows and the future evolution of the vertical hydraulic gradient in the transposition zone are of importance in the performance assessment and the safety analysis of a future repository for radioactive waste. The study is based on numerical modelling and the established model covers the whole of the Paris basin. The studied time period corresponds to 1 million years into the future. The initial geometry of geological layers as well as the conductivity and the porosity of the layers are input data to model, and defined by the single-continuum multi-scale hydrogeological model of the Paris Basin and the Meuse/Haute-Marne Sector area as developed by Andra. A description of the transient geomorphologic evolution was used as input data to the groundwater flow modelling. The description include: (i) The deformation of the geological layers as a result of a non-symmetric tectonic uplift of the Paris basin and (ii) The movement of the topography because of mechanical erosion along valleys, chemical erosion along plateaus and sedimentation along valleys. The modelling of the

  5. Deposition of radon decay products on the skin of balneotherapy patients in Gastein; Anlagerung von Radon-Folgeprodukten auf der Haut von Patienten bei der Baedertherapie in Gastein

    Energy Technology Data Exchange (ETDEWEB)

    Tempfer, H.; Schober, A.; Lettner, H.; Hofmann, W. [Inst. fuer Physik und Biophysik, Univ. Salzburg (Austria); Foisner, W. [Thermentempel Bad Hofgastein (Austria); Steger, F. [Oesterreichisches Forschungszentrum Seibersdorf GesmbH (Austria)

    2001-07-01

    ). Eine der Anwendungen des Thermalwassers ist die Exposition der Patienten in einer 450 1 fassenden Wanne (Best'sche Wanne) mit anschliessender Ruhephase. Um die Hypothese, dass die Zerfallsprodukte des Radons eine wichtige Rolle bei der therapeutischen Wirkung spielen, zu ueberpruefen, sollte das Anlagerungsverhalten der Rn-Folgeprodukte untersucht werden. Nach einem Aufenthalt der Testpersonen von 20 Minuten in der Wanne wurde der Aktivitaetsverlauf an verschiedenen Punkten des Koerpers (Unterarme, Bauch, Unterschenkel) alpha-spektrometrisch gemessen. Aus den Spektren und den Zerfallskurven koennen die Aktivitaeten der einzelnen Folgeprodukte {sup 218}Po, {sup 214}Pb und {sup 214}Bi/{sup 214}Po unterschieden werden. Um den zeitlichen Verlauf der Zerfallsproduktanlagerung zu untersuchen, wurde eine Versuchsperson dem Wasser jeweils fuer 10, 20, 30, 40 und 60 Minuten ausgesetzt; danach wurde wieder der Aktivitaetsverlauf ueber 30 Minuten aufgezeichnet. Die Messungen zeigten, dass sich die Aktivitaeten der einzelnen Zerfallsprodukte auf der Haut stark unterscheiden. Einerseits scheint die Verteilung am Koerper keineswegs homogen zu sein, andererseits konnten individuelle Unterschiede zwischen den einzelnen Person beobachtet werden. So schwankten die Mittelwerte der Aktivitaeten auf der Haut zwischen 1,2 Bq/cm{sup 2} und 4,1 Bq/cm{sup 2}. Die Exposition und Messung von Kupfer- und PVC-Platten bestaetigten fruehere Ergebnisse, nach denen sich Radonzerfallsprodukte auf unbelebten Flaechen weniger stark anlagern als auf belebten. Aus der Tatsache, dass die Zerfallsprodaktivitaeten auf der Haut bemerkenswert hoch sind, erscheint ein moeglicher Zusammenhang mit der Heilwirkung seht wahrscheinlich. (orig.)

  6. Study of current instabilities in high resistivity gallium arsenide; Etude des instabilites de courant dans l'arseniure de gallium de haute resistivite

    Energy Technology Data Exchange (ETDEWEB)

    Barraud, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    gallium de haute resistivite. Nous montrons que ces oscillations sont associees a la progression lente d'un domaine de fort champ electrique a travers tout l'echantillon. L'etude experimentale des proprietes de ces instabilites nous a permis de differencier ce phenomene de l'effet Gunn, des effets acoustoelectriques et des effets de contacts. Nous proposons pour rendre compte de ce type d'instabilites un mecanisme de piegeage differentiel sur des impuretes repulsives, capable de depeupler la bande de conduction a champ electrique eleve et de donner naissance a un domaine de champ intense. Le developpement qualitatif de ce modele nous permet de rendre compte de toutes les proprietes des cristaux d'arseniure de gallium de haute resistivite soumis a un champ electrique eleve: augmentation de la constante de Hall, existence d'un seuil de tension pour ces oscillations, formation de domaines de champ intense, lenteur de la propagation de ces domaines, enfin possibilite de renverser le sens de la propagation du domaine sans detruire celui-ci. Le developpement quantitatif du modele permet de calculer les differentes grandeurs caracteristiques de ces instabilites. La comparaison avec l'experience montre une bonne concordance, les legeres divergences provenant surtout de la meconnaissance actuelle des proprietes de transport dans l'arseniure de gallium aux champs electriques eleves. A la lumiere de ce modele, il apparait que le phenomene d'instabilite etudie peut se produire pour une gamme etendue de concentrations en centres repulsifs, et pour toute une gamme de resistivites. Ceci explique qu'il apparaisse systematiquement dans l'arseniure de gallium de moyenne et haute resistivite. (auteurs)

  7. The Main Technological Characteristics of Apparatus for Industrial Radiochemical Processes, in Particular Ethylene Polymerization; Caracteristique techniques fondamentals des appareils pour l'application industrielle de reactions chimiques sous rayonnement (notamment la polymerisation de l'ethylene ); Osnovnye tekhnologicheskie kharakteristiki apparatov dlya provedeniya radiatsionno-khimi-cheskikh protsessov (v chastnosti, dlya polimerizatsii ehtilena) v promyshlennom masshtabe; Principales caracteristicas tecnologicas de los aparatos para la aplicacion industrial de reacciones radioquimicas

    Energy Technology Data Exchange (ETDEWEB)

    Syrkus, N P; Breger, A K; Weinstein, B I [Karpov Physicochemical Institute, Moscow, USSR (Russian Federation)

    1960-07-15

    The paper gives a general review of some of the main technological features of apparatus, for instance spherical apparatus, for industrial radiochemical processes. A method is proposed for estimating the effectiveness of apparatus of any given construction by comparing it with the output of an infinitely large apparatus having the same radiation source. An account is given of the technological features of an apparatus for radio-polymerizing ethylene at 200 atmospheres and 25{sup o}C{sup 1} with a rodshaped gamma-radiation source (Co{sup 60}) of variable activity. This apparatus can be designed to suit the mean dose rate which the power efficiency of the apparatus allows. It is shown that the yield, Q, of the apparatus is, other things being equal, a constant ration of the power, W{sub 0}, of the gamma-radiation of the apparatus. In the apparatus reviewed, Q {approx} W{sub 0}{sup 0,5}. (author) [French] Le memoire contient un expose general des caracteristiques techniques essentielles des appareils, par exemple d'un appareil du type spherique, pour l'application industrielle de reactions chimiques sous rayonnement. Le memoire propose une methode pour evaluer l'efficacite d'appareils de tous types en comparant la productivite de chaque modele avec celle d'un appareil infiniment grand, alimente par une source de rayonnement identique. Le memoire indique le calcul des caracteristiques techniques de l'appareil destine a la polymerisation sous rayonnement de l'ethylene (pression : 200 atmospheres, temperature: 25{sup o}C{sup 2} avec une source allongee de rayonnement gamma Co{sup 60} pour diverses activites. Un appareil de ce type peut etre calcule selon les valeurs moyennes de l'intensite des doses, determinees selon la valeur du coefficient d'efficacite totale energetique de l'appareil. On constate que la productivite (Q) de l'appareil, toutes choses egales d'ailleurs, est puissance de l'intensite (W{sub 0}) du rayonnement gamma de l'appareil. Pour l'appareil considere

  8. La différence épidémiologique des hémorragies digestives hautes entre les hommes et les femmes

    Science.gov (United States)

    El Mekkaoui, Amine; Saâda, Kaoutar; Mellouki, Ihssane; El Yousfi, Mounia; Aqodad, Nourdin; El Abkari, Mohammed; Ibrahimi, Adil; Benajah, Dafr-Allah

    2012-01-01

    Introduction Des différences épidémiologiques, étiologique voire pronostique des hémorragies digestives hautes (HDH) entre les deux sexes opposés ont été cité par différentes études. Méthodes Nous avons essayé de déceler ces différences à travers une analyse rétrospective nichée sur une étude prospective sur les hémorragies digestives hautes ayant inclus 945 patients. Résultats Six cents trente-sept patients étaient des hommes (67,4% Vs 32,6%). Un antécédent d'HDH était trouvé chez 24,2% des cas sans différence significative entre les deux sexes. L'âge de survenue de l'hémorragie était plus élevé chez les femmes que chez les hommes : 51,5 ans ± 18,8 Vs 47,8 ans ± 18,3 (p : 0,003). Les étiologies de l'HDH étaient différentes entre les deux sexes. Alors que l'hémorragie liée à l'HTP était la première cause chez la femme (38 % Vs 23,5 % chez l'homme, psexe masculin contre 35,4 % des patientes avec un p = 0,03. Le taux de récidive et de décès global étaient de 7,5 % et de 5,7 % des cas respectivement, sans différence significative entre les deux sexes. Conclusion L'étude trouve un profil épidémiologique, clinique et étiologique différent selon le sexe des patients. PMID:23077715

  9. Installation of a bitumen coating plant for high-activity concentrates; Installation pilote d'enrobage par le bitume de concentrats de haute activite

    Energy Technology Data Exchange (ETDEWEB)

    Rodier, J; Lefillatre, G; Seyfried, P [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1969-07-01

    Following the excellent results obtained on the industrial coating of radioactive sludges, the possibility of solidifying also the evaporation concentrates with bitumen has been considered. For high activity concentrates, the use of bitumen is however limited by two main parameters: temperature resistance, irradiation resistance. By making use of the characteristics of a blown bitumen, it has been possible to design a high activity coating pilot plant treating concentrations of several tens of curies per litre. This plant will make use of a screw-type extrusion machine capable of coating treated concentrates at a rate of 20 l/hr. Before being coated, the concentrates will be subjected to a coprecipitation treatment designed to make the radioelements insoluble. This installation will make possible, apart from technological studies, laboratory experiments on the coated material (measurements on self-heating, on electrical charges, on radiolytic gases, and also lixiviation tests. It is at present believed, on the basis of available data, that it is possible to coat concentrates having an activity of 20 Ci/l at a price of 1840 F per cubic metre. (authors) [French] A la suite des excellents resultats obtenus pour l'enrobage industriel des boues radioactives, il a ete envisage de solidifier egalement les concentrats d'evaporation par le bitume. Pour les concentrats de haute activite, l'emploi du bitume est cependant limite par deux parametres essentiels: tenue a la temperature, tenue a l'irradiation. Grace aux caracteristiques d'un bitume souffle, il a ete possible de concevoir une installation pilote d'enrobage haute activite contenant plusieurs dizaines de curies par litre. Cette installation utilisera une machine du type extrudeuse a vis qui peut enrober 20 l/h de concentrats traites. Avant leur enrobage, les concentrats subiront un traitement de coprecipitation destine a insolubiliser les radioelements. En dehors des etudes technologiques, cette installation

  10. Dispersions of Oxides in Oxide Matrices as High-Temperature Reactor Fuels; Dispersions d'oxyde dans des matrices d'oxyde, utilisees comme combustibles dans des reacteurs a haute temperature; Dispersiya okisej v okislovykh matritsakh v kachestve topliva dlya vysokotemperaturnogo reaktora; Empleo de dispersiones de oxidos en matrices de oxidos, como combustibles para reactores de elevada temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Williams, J. [Atomic Energy Research Establishment, Harwell (United Kingdom)

    1963-11-15

    The potential usefulness of dispersions of PuO{sub 2}, UO{sub 2} and ThO{sub 2} in matrices of BeO, Al{sub 2}O{sub 3}, MgO and SiO{sub 2} is reviewed in terms of fuel integrity and fabrication. Dimensional stability and fission-product retentivity are the two features most important to fuel integrity. Compatibility of the constituents of the fuels with one another and with the coolant will influence dimensional stability, but oxide fuels are well favoured in these respects. Dimensional changes under irradiation will contain contributions from neutron and fission fragment damage to the matrix, from radiation damage to the fissile-fertile phase and from agglomerated fission-product gases. Thermal stresses are also capable of effecting changes in shape. However, information on mechanisms for stress relaxation is too limited to enable any reasonable theoretical assessment of behaviour to be made. Both light irradiation and high burn-up studies of fission-product release from the fissile-fertile oxides have concerned themselves mainly with the gaseous products, chiefly xenon. Data on the release of other fission products is very limited as is also information on the movement of fission products in general through the potential matrix materials. Studies of the permeability of sintered pure oxides indicate that densities of at least 95% theoretical density (maybe even 98%) will be needed to eliminate open porosity in such matrices. A variety of techniques are available for the preparation of fissile-fertile particles, for their coating and for their incorporation into high-density matrices. Work on laboratory-scale fabrication processes is well advanced. (author) [French] L'auteur examine la possibilite d'utiliser des combustibles disperses - PuO{sub 2}, UO{sub 2} et ThO{sub 2} et matrices de BeO, Al{sub 2}O{sub 3}, MgO et SiO{sub 2} - dans des reacteurs a haute temperature, au point de vue de l'integrite du combustible et de sa transformation. La stabilite dimensionnelle

  11. Fission gas pressure build-up and fast-breeder economy; Accumulation de la pression des gaz de fission et economie des reacteurs surgenerateurs a neutrons rapides; Nakoplenie davleniya gazov produktov deleniya i ehkonomika reaktorov-razmnozhitelej na bystrykh nejtronakh; Aumento de la presion de los gases de fision y economia de los reactores reproductores rapidos

    Energy Technology Data Exchange (ETDEWEB)

    Engelmann, P [Kernforschungszentrum, Karlsruhe (Germany)

    1962-03-15

    Fuel-cycle costs and doubling time of fast-breeder reactors are strongly affected by the fuel-burn-up obtainable. Use of oxide or carbide fuel offers the possibility of reaching a burn-up of 100 000 MWd/t. In fuel-clad elements, a limiting factor is the fission-gas-pressure build-up. At the high burn-up considered, an appreciable fraction of the fission gases gets into the pores and thus contributes to the pressure on the can. Starting from the known fission-product yields and decay chains, gas production and pressure build-up have been calculated. Three physical models have been employed in calculating the pressure acting upon the can : the gas is contained either in interconnected pores, in separate pores, or in a central hole. The pressure-dependence upon free volume (fuel density) and temperature will be discussed. Cans made of high-strength materials as Ineonel-X and molybdenum could stand the fission-gas pressure at operating temperatures. Unfortunately, these materials have higher absorption cross-sections than stainless steel. Results of a multi-group calculation are given, showing the effect of using these can materials and of decreasing the fuel density on critical mass and breeding ratio in small and medium-size breeders. (author) [French] Le cout du cycle de combustible et la periode de doublement des reacteurs surgenerateurs a neutrons rapides dependent etroitement du taux de combustion. En utilisant pour combustible un oxyde ou un carbure, on peut atteindre un taux de combustion de 100 000 MW j/t. Avec des combustibles gaines, l'accumulation de la pression des gaz de fission est un facteur limitatif. Pour le fort taux de combustion envisage, une fraction non negligeable des gaz de fission penetre dans les interstices et contribue ainsi a la pression sur la gaine. A partir des rendements en produits de fission et des chaines de desintegration connus, l'auteur a calcule la production de gaz et l'accumulation de pression. Pour calculer la pression

  12. Redécouverte d’un milliaire romain. La borne de Chaspuzac (Haute-Loire, cité des Vellaves (province d’Aquitaine The rediscovery of a Roman milestone. The stone of Chaspuzac (Haute-Loire, city of the Vellaves (Aquitaine

    Directory of Open Access Journals (Sweden)

    Marion Dacko

    2010-11-01

    Full Text Available Les recherches initiées dans le cadre d’une thèse en archéologie sur les voies romaines en territoire arverne et vellave ont récemment conduit à la redécouverte d’une borne milliaire, perdue dans la réserve du musée Crozatier au Puy-en-Velay (Haute-Loire depuis la fin du xixe s. Le réexamen approfondi de l’inscription permet de réviser les précédentes lectures à la lumière de données nouvelles. Complément pour la série des milliaires de l’empereur Maximin, cette borne constitue un témoin des vastes travaux de réfection entrepris sur la voie “ Bolène ” tout au long du iiie siècle.The research started as part of a thesis on Roman roads in the Arverne and Vellave territory has recently led to the rediscovery of a milestone, lost in the storerooms of the Crozatier museum at Puy-en-Velay (Haute-Loire since the end of the 19th century. A thorough reexamination of the inscription has enabled a revision of previous writings in the light of new information. An addition to the series of milestones of the Emperor Maximinus, this stone is evidence of the great repair works undertaken on the Bolène Way throughout the 3rd century.

  13. The Influence Of Hydrothermal Alteration And Weathering On Rock Magnetic Properties Of Granites From The Eps-1 Drilling (soultz-sous-forÊts / France)

    Science.gov (United States)

    Just, J.; Schleicher, A.; Kontny, A.; de Wall, H.

    The EPS-1 drilling in Soultz-sous-Forêts (Rhinegraben, France) recovered a core pro- file of Tertiary to Permo-Mesozoic sediments deposited on a Variscan granitic base- ment. Magnetic susceptibility (k) measurements on the core material revealed a con- tinous increase from the basement/cover boundary (kmean 0.4 x 10-3 SI) into the magnetite-bearing granite (kmean 13 x 10-3 SI) over a depth range of 1417 U 1555 m. Rock magnetic and mineralogic studies were performed for the fresh granite, the hydrothermally altered granite near a fault zone and the altered granite from the fossil land surface near the basement/cover boundary. The decrease in susceptibility can be correlated with a gradual decomposition of magnetite to hematite and an alteration of the matrix minerals feldspars, biotite and hornblende to clay minerals and carbon- ates. Along with this transition, characteristic rock magnetic signatures can be dis- criminated for different degrees of alteration. While temperature-dependent magnetic susceptibility k(T)-curves in fresh granites indicate a typical multidomain magnetite course with good reversibility, different types of irreversible courses are observed for the altered granite. However, hematite could not be identified in the k(T)-curves. Al- tered granite shows relatively weak magnetic behaviour in AF-demagnetisation exper- iments, untypical for hematite. The alteration of the fresh granite also causes a change in magnetic fabric parameter, especially of the anisotropy factor. The magnetic min- eralogy from the altered granite in respect to the changes in rock magnetic properties will be discussed.

  14. Influences de la symphonie concertante sur la musique de la Cour parisienne sous l'Empire et la Restauration (1800-1830

    Directory of Open Access Journals (Sweden)

    Dratwicki, Alexandre

    2003-12-01

    Full Text Available The origins of the very much appreciated "symphonie concertante" can be found in the importance of public concerts given in Paris at the end of the 18th century. The specific repertoire played at the French Court during the years 1800-1830 distinctly shows this vogue for the "symphonie concertante", for it reveals the still unknown importance of virtuosity. Considered as an musical entertainment for the pompous parties at the French Court or as an musical accompaniment for the masses given at the Imperial and Royal Chapel, this "decorative concertant syle" became an essential part of the Regime etiquette during the Napoleonic empire as well as the Restoration period. This music, perfectly incorporated into the official guidelines, will disappear as a consequence of the political events of 1830 and the arrival of a new aesthetic movement, the Romanticism.

    [fr] La vogue du concert public à Paris, à la fin du XVIIIe siècle, fut à l'origine de l'essor phénoménal que connut la symphonie concertante. Le répertoire de la musique de la Cour - entre 1800 et 1830 - est particulièrement représentatif de cette mode : il révèle une place encore insoupçonnée laissée à la virtuosité. Agrémentant les messes de la Chapelle ou les bals donnés lors de fastueuses soirées, ce « style concertant décoratif » devint un élément constitutif de l'apparat gouvernemental sous l'Empire et la Restauration. Une sorte d'académisme officiel que les événements politiques de 1830 et l'essor du romantisme musical feront définitivement disparaître.

  15. Experimental and numerical study of the stability of phyllosilicates in a strong thermal gradient. Test in the geothermal site of Soultz-sous-Forets

    International Nuclear Information System (INIS)

    Baldeyrou-Bailly, A.

    2003-01-01

    Thermodynamic data of hydrated phyllosilicates, in particular clay minerals are not well known. The stability fields of these minerals are not well determined; following some authors they even do not exist. We have developed an experimental approach, in which a sequence of local equilibrium states between a fluid and minerals take place in a closed gold cell along a strong thermal gradient. The experiments were conducted in the chemical systems: Mg-Al-Si-H 2 O (MASH), K-Al-Si-H 2 O (KASH), and K-Mg-Al-Si-H 2 O (KMASH). The sequences of crystallization observed along the thermal gradient are the same if one exchanges the position of the cells containing the initial reacting materials with respect to the thermal gradient end-members. The crystallization sequences correspond to local equilibrium states. Following the temperature increase (from 200 to 350 C) one observes the following sequences: di-octahedral smectite? tri-octahedral smectite; kaolinite? donbassite? tri-octahedral chlorite; smectite? illite? muscovite; or even kaolinite? illite + smectite? donbassite; commonly observed in hydrothermal systems. They allow to develop a thermodynamic model for hydrated phyllosilicates, taking into account their hydration state as a function of temperature. This model shows the stability fields of clay minerals between 200 and 350 C.The chemical and mineralogical dynamics showed in these experimental systems has been applied to predict the possible dissolutions and/or precipitations which may take place between the circulated hot fluid and the geothermal granitic reservoir in the geothermal system at Soultz-sous-Forets. These processes may affect the duration of the geothermal reservoir, as a function of evolution in the morphology of the porosity. Our experimental approach shows that feldspars and smectites are forming the major part of the total volume of silicates which may precipitate in addition to carbonates already described in previous studies. (author)

  16. The development of a very high stability electrostatic generator (1962); Etude et realisation d'un generateur electrostatique a tres haute stabilite (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Jonckheere, R E.L. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1962-07-01

    This thesis deals with the study of an electrostatic high voltage generator having a voltage stability of the order of 10{sup -6} per minute. This equipment should be very useful in electron microscopy. The electrostatic generator is studied as a control system element: transfer function, parasitic signals and noise are determined and a mathematical model is proposed. A theoretical study of the open loop transfer function, stability, transient response, voltage stabilization of five different control systems shows which one should be able to fulfill the requirements There follows a detailed study of drift, a description of the actual system and performance data. (author) [French] Cette etude concerne un generateur electrostatique capable de fournir une tres haute tension continue dont la stabilite relative est de l'ordre de 10{sup -6} pendant une minute. Une telle performance rend cet appareillage tres utile en microscopie electronique. La generatrice electrostatique est etudiee en tant qu'element d'un systeme asservi: on determine successivement la fonction de transfert, les perturbations, le bruit de fond et le modele mathematique. L'etude de cinq differents circuits de regulation en ce qui concerne leur fonction de transfert, stabilite, reponse en regime transitoire, attenuation des perturbations, permettra de choisir le systeme qui semble le mieux repondre aux exigences. Viennent ensuite une etude detaillee de la derive, la description de la realisation pratique et les resultats de mesure. (auteur)

  17. The ANDRA, two years after the June 2006 28. programming law. Assessment and perspectives in Meuse/Haute-Marne. Press conference of June 2008, 12

    International Nuclear Information System (INIS)

    2008-01-01

    This report first presents the main activities of ANDRA (the French national agency for radioactive waste management) in the studies for the development and construction of a high-activity and long-life waste storage site, and particularly for a project located in Meuse/Haute-Marne region, and more briefly for a low-activity and long-life waste storage (for graphite and radiferous wastes). It presents and comments the legal frame (programming law of June 2006, 28) which introduces a national plan for radioactive materials and wastes (PNGMDR) which is to be updated once every three years. Then, it describes ANDRA's missions, its role as industrial operator, its financing, and its certification level. It describes its general interest missions: national inventory of radioactive materials and wastes, collection and processing of common usage radioactive objects, and decontamination of sites polluted by radioactivity. It presents its project of reversible deep storage of high and intermediate level and long life wastes (a facility is foreseen to operate in 2025), the technology centre, the 'open doors day', and the project of a hollow storage site for low activity and long life wastes

  18. Fragilisation par le zinc liquide des aciers haute résistance pour l'automobile Liquid zinc embrittlement of high strength automotive steels

    Directory of Open Access Journals (Sweden)

    Frappier Renaud

    2013-11-01

    Full Text Available Cette étude présente les investigations menées sur la fragilisation par le zinc liquide d'un acier électro-zingué. La caractérisation mécanique par essais de traction à haute température montre un important puits de ductilité entre environ 700 ∘C et environ 950 ∘C. L'observation au MEB des éprouvettes de traction indique que, dans la gamme de température observée pour laquelle il y a fragilisation, on a mouillage intergranulaire des joints de grains de l'acier à l'interface acier/revêtement par des films de Zn. La corrélation entre mouillage intergranulaire thermiquement activé d'une part, et propagation de fissure lors du chargement d'autre part, est discutée. This study deals with liquid zinc embrittlement for electro-galvanized steel. Mechanical characterization by high temperature tensile tests shows a drastic loss of ductility between 700 ∘C and 950 ∘C. SEM investigations show that steel grain boundaries under the steel/coating interface are penetrated by a liquid Zn channel, only in the temperature range of embrittlement. A correlation can be drawn between i thermal activated-grain boundary wetting and ii crack propagation in presence of external stress.

  19. Le rapprochement Chercheur-Consultant en aménagement du territoire : un apport à haute valeur ajoutée ?

    Directory of Open Access Journals (Sweden)

    Christine Chemin

    2010-02-01

    Full Text Available En aménagement du territoire, de nouvelles pratiques partenariales semblent émerger lors de la réalisation d'expertises (études, ingénierie de projets, audits, etc.. Si le recours aux cabinets-conseils – au Consultant – et aux laboratoires scientifiques – au Chercheur – par les services de l'Etat ou les collectivités territoriales existe depuis de nombreuses années, le rapprochement et le partenariat entre les consultants et les chercheurs est récent. Certes, cette pratique n’est pas encore systématique en aménagement du territoire mais elle constitue, selon les commanditaires publics, un apport à haute valeur ajoutée dans les prestations de services.In urban planning new partnership practices seem to appear through the realization of expertises (studies, projects engineering, audits…. Although the appeal to consulting firms – to consultants – and in the scientific laboratories – to researchers – by the State services or local government, exists for a long time now, the partnership between consultants and researchers is recent. Even though this partnership is not systematic in urban planning, it brings a contribution with a high added value in the services, according to the public partners.

  20. Soil Lead Testing at a High Spatial Resolution in an Urban Community Garden: A Case Study in Relic Lead in Terre Haute, Indiana.

    Science.gov (United States)

    Latimer, Jennifer C; Van Halen, David; Speer, James; Krull, Stephanie; Weaver, Patricia; Pettit, Joseph; Foxx, Heather

    2016-10-01

    Industrial emissions, deteriorating or improperly removed lead paint, and the use of lead additives in fuel have left a substantial burden of heavy metals, such as lead, in urban soils. Much of this lead remains near the surface where it has the potential to impact human health. Exposure to lead, especially in children, can have lasting impacts on neurological development and academic achievement. Urban gardening, in particular, is an activity that could result in increased exposure to soil lead for many unsuspecting gardeners. During the summer of 2012, more than 1,061 surface soil samples were collected from an approximately 1.25 acre urban community garden in Terre Haute, Indiana. Samples were collected to evaluate the spatial distribution of lead across the community garden on the plot level. The results highlight the variability that can be seen within small areas of a former residential property, for example lead concentrations that are low (garden plot as concentrations that are considered high (>600 ppm). Based on the results of this work, several areas of concern were identified and the community garden was reconfigured to reduce potential lead exposure to gardeners and the local community.

  1. Electrohydrodynamics: a high-voltage direct energy conversion process; L'electrohydrodynamique: Un procede de conversion directe d'energie a haute tension

    Energy Technology Data Exchange (ETDEWEB)

    Brun, S [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-04-15

    This analysis consists of a theoretical and practical study of a high-tension electrical power generator based on the Van de Graaff generator principle, the main difference being that the charges produced are transported by a gas in motion and not by a belt. The electrical and thermal properties of such a generator are studied, as well as the difficult problem of the production of the ionised particles used in the conversion. A certain number of results already published on this process for converting kinetic energy into electrical energy is given, as well as some possible applications in the field of space technology. (author) [French] Cette analyse est une etude theorique et pratique d'un generateur de puissance electrique a haute tension, base sur le principe du generateur Van de Graaff, la difference principale etant que les charges produites sont transportees pur un gaz en mouvement et non par une courroie. Les proprietes electriques et thermiques d'un tel generateur sont etudiees ainsi que le probleme delicat de la production des particules ionisees utilisees dans la conversion. Un certain nombre de resultats publies sur ce procede de conversion d'energie cinetique en energie electrique sont reproduits, ainsi que les applications possibles aux problemes spatiaux. (auteur)

  2. Preparation of plutonium fluoride to obtain metal of high purity; Preparation de fluorures de plutonium pour l'obtention de metal de haute purete

    Energy Technology Data Exchange (ETDEWEB)

    Faugeras, P; Brut, A; Helou, R [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    In the process of treating irradiated uranium, plutonium can be separated from the majority of the fission products and from the uranium by TBP extraction cycles. The high purity necessary for metallurgical and nuclear physics experiments led us to consider more elaborate purification processes, and a specially adapted method of fluoride preparation. The first part of the paper describes purification cycles of plutonium in solution on ion exchange resins, and the results are given. The second part contains the description and results of the fluoride preparation method. (author) [French] Dans le processus du traitement de l'uranium irradie, les cycles d'extraction au TBP permettent la separation du plutonium de la majorite des produits de fission et de l'uranium. La haute purete exigee pour les experiences de metallurgie et de physique nucleaire nous a conduit a envisager des purifications plus poussee et un mode de confection des fluorures specialement adapte. La premiere partie de l'expose decrit et donne les resultats de cycles de purification du plutonium en solution sur des resines echangeuses d'ions. La seconde partie decrit et donne les resultats du mode de confection des fluorures. (auteur)

  3. Recent advances in the designing and the equipment of high activity laboratories; Progres recents dans la conception et l'equipement des laboratoires de haute activite

    Energy Technology Data Exchange (ETDEWEB)

    Bazire, R; Duhamel, F [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The authors described the general principles governing the design of a laboratory for experimenting and handling radioactive substances. The difficulties encountered are of two types: 1) those due to the dangers of external irradiation; 2) those due to the dangers of internal contamination. As an example, the authors describe the French achievements in this field and in particular: - the high-activity laboratories at Saclay; - the laboratory for the examination of irradiated fuels at Saclay; - the 'hot' laboratory of the CEN-Grenoble; - the alpha, beta and gamma laboratories of the CEN-Fontenay-aux-Roses. Finally, the report describes the protective materials used for these installations. (author) [French] Les auteurs exposent quels sont les principes generaux qui president a la conception d'un laboratoire a des travaux et des manipulations sur des substances radioactives. Les difficultes a surmonter sont de deux ordres: 1) celles qui proviennent du danger d'irradiation externe; 2) celles qui proviennent du danger de contamination interne. A titre d'exemple, les auteurs decrivent les realisations francaises dans ce domaine et en particulier: - le laboratoire de haute activite de Saclay, - le laboratoire d'examen des combustibles irradies de Saclay, - le laboratoire chaud du CEN-Grenoble, - les laboratoires alpha, beta, gamma du CEN-Fontenay-aux-Roses. Enfin, le rapport decrit les materiaux de protection mis en oeuvre pour ces realisations. (auteur)

  4. Health impact assessment resulting from water pollution by the activities of extraction and treatment of uranium in the department of Haute-Vienne

    International Nuclear Information System (INIS)

    Grenetier, Nicolas

    2002-01-01

    From the middle to the end of the twentieth century, several thousands tons of uranium have been extracted from the ground of the French department of Haute-Vienne. These activities have not been without any environmental consequences. Water is an environmental compartment particularly vulnerable because several polluting factors may release radionuclides from 238 U chain a long time after the end of the mining activities. It has been shown that water used for drinking water fabrication for the City of Limoges, 140 000 inhabitants, and for a group of 22 communes with 20 000 inhabitants and leisure water of Saint-Pardoux lake have activities which are unusually high. A health risk quantitative assessment has been carried out. The results show for radiological risk that 226 Ra is, in the most realistic hypothesis, the main responsible for the annual effective dose; moreover, the annual effective dose are lower than the radioprotection standards and the WHO's recommendations of 0.1 mSv per year in drinking water. The results also show that it would not be pertinent to carry out an epidemiological study because of a lack of statistical power. (author)

  5. The development of a very high stability electrostatic generator (1962); Etude et realisation d'un generateur electrostatique a tres haute stabilite (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Jonckheere, R.E.L. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1962-07-01

    This thesis deals with the study of an electrostatic high voltage generator having a voltage stability of the order of 10{sup -6} per minute. This equipment should be very useful in electron microscopy. The electrostatic generator is studied as a control system element: transfer function, parasitic signals and noise are determined and a mathematical model is proposed. A theoretical study of the open loop transfer function, stability, transient response, voltage stabilization of five different control systems shows which one should be able to fulfill the requirements There follows a detailed study of drift, a description of the actual system and performance data. (author) [French] Cette etude concerne un generateur electrostatique capable de fournir une tres haute tension continue dont la stabilite relative est de l'ordre de 10{sup -6} pendant une minute. Une telle performance rend cet appareillage tres utile en microscopie electronique. La generatrice electrostatique est etudiee en tant qu'element d'un systeme asservi: on determine successivement la fonction de transfert, les perturbations, le bruit de fond et le modele mathematique. L'etude de cinq differents circuits de regulation en ce qui concerne leur fonction de transfert, stabilite, reponse en regime transitoire, attenuation des perturbations, permettra de choisir le systeme qui semble le mieux repondre aux exigences. Viennent ensuite une etude detaillee de la derive, la description de la realisation pratique et les resultats de mesure. (auteur)

  6. High-resolution reconstruction of atmospheric deposition of trace metals and metalloids since AD 1400 recorded by ombrotrophic peat cores in Hautes-Fagnes, Belgium.

    Science.gov (United States)

    Allan, Mohammed; Le Roux, Gaël; De Vleeschouwer, François; Bindler, Richard; Blaauw, Maarten; Piotrowska, Natalia; Sikorski, Jaroslaw; Fagel, Nathalie

    2013-07-01

    The objective of our study was to determine the trace metal accumulation rates in the Misten bog, Hautes-Fagnes, Belgium, and assess these in relation to established histories of atmospheric emissions from anthropogenic sources. To address these aims we analyzed trace metals and metalloids (Pb, Cu, Ni, As, Sb, Cr, Co, V, Cd and Zn), as well as Pb isotopes, using XRF, Q-ICP-MS and MC-ICP-MS, respectively in two 40-cm peat sections, spanning the last 600 yr. The temporal increase of metal fluxes from the inception of the Industrial Revolution to the present varies by a factor of 5-50, with peak values found between AD 1930 and 1990. A cluster analysis combined with Pb isotopic composition allows the identification of the main sources of Pb and by inference of the other metals, which indicates that coal consumption and metallurgical activities were the predominant sources of pollution during the last 600 years. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. Abécassis Frédéric et Meynier Gilbert (s/d, Pour une histoire franco-algérienne. En finir avec les pressions officielles et les lobbies de mémoire. Paris, Éditions la Découverte, 2008, 250 p.

    Directory of Open Access Journals (Sweden)

    James McDougall

    2011-11-01

    Full Text Available Ouvrage hors du commun, issu d’un projet de collaboration exceptionnelle, ce livre témoigne d’une grande ouverture du champ auquel il se consacre, l’histoire de l’Algérie coloniale. Il annonce en même temps, et volontairement semble-t-il, quelque chose de bien plus important encore qu’il ne soit, seul, en mesure de fournir. Fruit du (très grand colloque - 64 communications en tout - tenu à l’Ecole normale supérieure des lettres et sciences humaines de Lyon, en juin 2006, sous le titre, Pour ...

  8. Abécassis Frédéric et Meynier Gilbert (s/d), Pour une histoire franco-algérienne. En finir avec les pressions officielles et les lobbies de mémoire. Paris, Éditions la Découverte, 2008, 250 p.

    OpenAIRE

    James McDougall

    2011-01-01

    Ouvrage hors du commun, issu d’un projet de collaboration exceptionnelle, ce livre témoigne d’une grande ouverture du champ auquel il se consacre, l’histoire de l’Algérie coloniale. Il annonce en même temps, et volontairement semble-t-il, quelque chose de bien plus important encore qu’il ne soit, seul, en mesure de fournir. Fruit du (très) grand colloque - 64 communications en tout - tenu à l’Ecole normale supérieure des lettres et sciences humaines de Lyon, en juin 2006, sous le titre, Pour ...

  9. Interaction Between Hf Waves and Plasma in Delta-2; Interaction dans 'Delta-2' d'une Onde Progressive Electromagnetique de Haute Frequence et d'un Plasma; Vzaimodejstvie vysokochastotnoj ehlektromagnitnoj begushchej volny s plazmoj na ustanovke ''Del'ta-2'; Interaccion de una Onda Progresiva Electromagnetica de Alta Frecuencia con el Plasma en la Instalacion 'Delta-2'

    Energy Technology Data Exchange (ETDEWEB)

    Breus, S. N.; Kurdjumov, V. N.; Levin, M. L.; Osovec, S. M.; Popova, N. Ja.; Popov, I. A.; Hodataev, K. V.; Shimchuk, V. P. [Radiotehnicheskij Institut AN SSSR, Moskva, SSSR (Russian Federation)

    1966-04-15

    than the phase velocity of the travelling wave, about 5 x 10{sup 7} cm/s, which is considerably smaller than the thermal velocity of the electrons. (author) [French] Le memoire expose les resultats de l'etude de l'interaction d'un plasma dense et du champ de haute frequenced'une onde magnetique progressant le long d'une chambre de decharge toroiedale (grand diametre - 700 mm, petit diametre - 85 mm). L'onde progressive est excitee a une frequence 2,4 MHz par un autogenerateur triphase d'une puissance d'environ 50 MW avec une duree d'impulsion comprise entre 250 et 350 {mu}s. Les pressions initiales etaient comprises entre 0,1 et 0,001 Tort, et le champ magnetique de haute frequence a la surface du plasma atteignait de 500 a '600 Oe. Dans ces conditions, les phenomenes essentiels qui determinent l'interaction sont lies aux effets non lineaires et avant tout a l'apparition d'une composante petmanente du courant longitudinal qui a atteint des valeurs de plusieurs milliers d'amperes. Au centre de la chambre, dans la zone des champs faibles, la conductivite du plasma etait de l'ordre de 3 a 4*10{sup 14} esu, ce qui pour un degre d'ionisation proche de 100% correspond a une temperature des electrons de 8 a 12 eV. Dans la zone des champs forts (zone de la couche ou se produit l'effet pelliculaite), la conductivite diminue d'un ordre de grandeur, ce qui produit une augmentation brutale de la puissance de haute frequence utilisable. Les auteurs ont decouvert aupres du courant longitudinal dans le plasma un champ magnetique longitudinal quasi stationnaire, forme par des courants transversaux. Ce champ a une structure complexe et il est possible qu'il soit conditionne, comme le montre la theorie de l'approximation, par un effet toroidal. Il est probable que les oscillations de plasma observees, de 20) a 500 kHz, correspondant par exemple aux oscillations particulieres d'Alfven dans ces champs, soient en rapportavecl'existencedeschampsmagnetiques quasi stationnaires. La presence

  10. The uranium dioxide-uranium system at high temperature; Le systeme uranium-dioxyde d'uranium a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Guinet, Ph.; Vaugoyeau, H.; Blum, P. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1966-07-01

    The liquidus curve has been determined by a saturation method in which the thermal gradient was cancelled upon cooling, and the solidus curve by analyzing the deposits in equilibrium with the liquid at each temperature. The diagram, of a displaced eutectic type, presents a liquid immiscibility domain between 47 and 59 mol per cent of dioxide and a substoichiometry range UO{sub 2x}, the minimum O/U ratio being 1,6 at 3470 {+-} 30 C. The monotectic composition was found by chemical analysis to be 59 mol per cent of dioxide and the reaction temperature 2470 {+-} 30 C. (author) [French] La courbe liquidus a ete determinee par une methode de saturation en annulant le gradient thermique au cours du refroidissement, la courbe solidus par analyse des depots en equilibre avec le liquide a chaque temperature. Le diagramme du type a eutectique deporte comporte un domaine d'immiscibilite liquide entre 47 et 59 moles pour cent de dioxyde, ainsi qu'un domaine d'existence du compose sous stoechiometrique UO{sub 2x}, le rapport O/U minimum etant egal a 1,6 a 2470 {+-} 30 C. La composition du monotectique, obtenue par analyse chimique, est de 59 moles pour cent de dioxyde et la temperature de la reaction a ete trouvee egale a 2470 {+-} 30 C. (auteur)

  11. Fuel slugs considered for use in the high flux reactor EL3; Elements combustibles envisages pour la pile a haut flux EL 3

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J A; Caillat, R; Gauthron, M; Montagne, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    EL3 was designed essentially for the study, under irradiation conditions, of materials used in the construction of atomic reactors. The study schedule allocates considerable time and effort to new types of fuel slugs. The present report described the various types of slug being tested or scheduled for tests. After laboratory study, each slug is tested in an experimental cell in the pile. The best are retained and used to charge the reactor (the present charge is purely provisional to permit first criticality and power rise tests)ren. [French] La pile EL3 est essentiellement destinee a l'etude sous irradiation des materiaux utilises dans la construction des reacteurs atomiques. Dans ce programme, une tres large part est reservee a l'etude de nouveaux elements combustibles. Le present rapport decrit les differentes solutions de cartouches dont l'essai est envisage ou en cours. Apres etude en laboratoire, chacune de ces solutions est testee dans une cellule experimentale en pile. Les meilleures seront retenues pour constituer le chargement normal de la pile (le chargement actuel etant essentiellement une solution provisoire qui a permis la divergence de la pile et les premiers essais de montee en puissance). (auteur)

  12. Characterization and interpretation of a fractured rocky massif from borehole data. Boreholes of geothermal project at Soultz-sous-Forets and other examples of unidirectional sampling; Caracterisation et interpretation d`un volume rocheux fracture a partir de donnees de forages. Les forages geothermiques de Soultz-sous-Forets et autres exemples d`echantillonnages unidirectionnels

    Energy Technology Data Exchange (ETDEWEB)

    Dezayes, CH

    1995-12-18

    In this thesis, we study fractures from borehole data on two sites: in one, located at Soultz-sous-Forets (Alsace) in the Rhine graben, boreholes reach a delta Jurassic series forming a petroleum reservoir. At Soultz, fractures have been studied on cores and borehole images. Striated faults present on cores permit to determine the tectonic history of the granite, completed by field study in Vosges Massif. This history corresponds to the Rhine graben history knowing by different authors. The analysis of vertical induced fractures observed on borehole images indicates a present-day NW-SE to NNW-SSE compression. These variations of stress direction are confirmed by others in situ measurements, as hydraulic injection, micro-seismicity, etc... On cores and borehole images, numerous fractures have been observed. Most of them are linked to the E-W distension, which permits the Rhine graben opening at Oligocene. At greatest scale, in quartz minerals, the micro-fractures are constitute by fluid inclusion trails. Several sets are related to the E-W distension, but others sets are linked to compressive stages. These sets are not observed on cores. This is a under-sampling of some fractures by the boreholes, but theses fractures exit into to rock massif. On borehole images, fracture density is weakest than the cores, however the set organisation is the same. At Ravenscar, the distribution of fracture spacing along different unidirectional sampling shows a exponential negative law. However, the fracture density varies with sampling. (author) 199 refs.

  13. Heat exchange and pressure drop of herring-bone fin surfaces. Experimental cell results at constant wall temperature; Echange de chaleur et perte de charge de surfaces a ailettes en chevrons. Resultats experimentaux en cellule a temperature de paroi constante

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1968-07-01

    The increase in the specific power of nuclear reactors of the gas-graphite type has necessitated the use of high performance exchange surfaces for canning the fuel (natural uranium). For this, experiments were carried out on cans fitted with herring-bone fins, at constant wall temperature; a flow of water at 100 deg. C passes inside the can which is cooled externally by a flow of CO{sub 2} at 15 bars pressure. This experimental set-up makes it possible to compare the aero-thermal performances of the different cans with an accuracy of 5 per cent. This report presents the results obtained in the form of a friction coefficient f{sub 0} and mean Margoulis number m{sub 0} as a function of the Reynolds number Re{sub 0}, this latter varying from 3 x 10{sup 5} to 9 x 10{sup 5}. (authors) [French] L'augmentation de la puissance specifique des reacteurs nucleaires de la filiere graphite-gaz a necessite l'utilisation de surfaces d'echange a hautes performances pour gainer le combustible (uranium naturel). Dans cette optique, des gaines munies d'ailettes disposees en chevron ont ete experimentees a temperature de paroi constante: un courant d'eau a 100 deg. C circule a l'interieur de la gaine qui est refroidie exterieurement par un ecoulement de CO{sub 2} sous une pression de 15 bars. Cette methode experimentale permet de situer les performances aerothermiques des gaines les unes par rapport aux autres a 5 pour cent pres. Ce rapport presente les resultats obtenus sous la forme d'un coefficient de frottement f{sub 0} et d'un nombre de Margoulis moyen m{sub 0} en fonction du nombre de Reynolds Re{sub 0}, ce dernier pouvant varier de 3. 10{sup 5} a 9. 10{sup 5}. (auteurs)

  14. Contribution of the Surface and Down-Hole Seismic Networks to the Location of Earthquakes at the Soultz-sous-Forêts Geothermal Site (France)

    Science.gov (United States)

    Kinnaert, X.; Gaucher, E.; Kohl, T.; Achauer, U.

    2018-03-01

    Seismicity induced in geo-reservoirs can be a valuable observation to image fractured reservoirs, to characterize hydrological properties, or to mitigate seismic hazard. However, this requires accurate location of the seismicity, which is nowadays an important seismological task in reservoir engineering. The earthquake location (determination of the hypocentres) depends on the model used to represent the medium in which the seismic waves propagate and on the seismic monitoring network. In this work, location uncertainties and location inaccuracies are modeled to investigate the impact of several parameters on the determination of the hypocentres: the picking uncertainty, the numerical precision of picked arrival times, a velocity perturbation and the seismic network configuration. The method is applied to the geothermal site of Soultz-sous-Forêts, which is located in the Upper Rhine Graben (France) and which was subject to detailed scientific investigations. We focus on a massive water injection performed in the year 2000 to enhance the productivity of the well GPK2 in the granitic basement, at approximately 5 km depth, and which induced more than 7000 earthquakes recorded by down-hole and surface seismic networks. We compare the location errors obtained from the joint or the separate use of the down-hole and surface networks. Besides the quantification of location uncertainties caused by picking uncertainties, the impact of the numerical precision of the picked arrival times as provided in a reference catalogue is investigated. The velocity model is also modified to mimic possible effects of a massive water injection and to evaluate its impact on earthquake hypocentres. It is shown that the use of the down-hole network in addition to the surface network provides smaller location uncertainties but can also lead to larger inaccuracies. Hence, location uncertainties would not be well representative of the location errors and interpretation of the seismicity

  15. Space-time dependent impulse response of a subcritical cylindrical reactor; Reponse impulsionnelle spatio-temporelle d'un reacteur cylindrique en regime sous-critique

    Energy Technology Data Exchange (ETDEWEB)

    Cazemajou, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    In this paper, a new formulation of the spatial dependent impulse response of a subcritical reactor in a cylindrical geometry is proposed. An expression of the transfer function between a point source at the center of coordinates and the flux at a given point (r,z) is obtained by solving: by means of Laplace transform, the one group diffusion equation. In this transfer function, variables r and p (p being the Laplace variable) remain linked within a modified Bessel function. Taking the inverse Laplace transform is done by two different ways: - using the Mellin-Fourier method which separates variables r and t. This method makes it possible to establish that there is identity between the classical formulation and the new one. - using an inverse Laplace transform which keeps variables r and t linked. This method requires to approximate the inverse Laplace transform of the end factor. It is then possible to replace the radial harmonics modes series of the classical expression by a single function. This new formulation seems to be of particular interest when dealing with reactors of large size and lifetime. It is also interesting each time the harmonics play an important role. (author) [French] Dans le present rapport, on propose une nouvelle formulation de la reponse impulsionnelle spatio-temporelle d'un reacteur sous-critique, en geometrie cylindrique. Une expression de la fonction de transfert entre une source ponctuelle placee au centre des coordonnees et le flux au point courant (r,z) est obtenue en resolvant, par transformation de Laplace, l'equation de la diffusion a un seul groupe d'energie. Dans cette fonction de transfert, les variables r et p (variable de Laplace) demeurent groupees dans une fonction de Bessel modifiee. Le retour a l'original est effectue de deux manieres: - la methode de Mellin-Fourier qui separe les variables r et t, permet d'etablir l'identite entre la nouvelle formulation et la formulation classique. - un original conservant les variables

  16. Numerical modeling of the impact of temperature on the behavior of minerals in the Soultz-sous-Forêts enhanced geothermal system

    Science.gov (United States)

    Van Ngo, Viet; Lucas, Yann; Clément, Alain; Fritz, Bertrand

    2015-04-01

    Operation of the enhanced geothermal system (EGS) requires to re-inject fluid, after heat exchange at the surface to the energy production, into the geothermal reservoir. This cold re-injected fluid can cause a strong disequilibrium with the fluid and granitic rock within the geothermal reservoir and then implies the possible dissolution/precipitation of minerals. The hydrothermal alterations include the transformation of plagioclase, biotite and K-feldspar and the precipitation of various secondary minerals. The major sealing phases observed in the main fracture zones are quartz, calcite, and clay minerals. These mineralogical transformations may modify the porosity, permeability and fluid pathways of the geothermal reservoir. In the Soultz-sous-Forêts EGS (Alsace, France), the hydraulic connection between the injection well and the production well is quite poor. Therefore, understanding the impact of changes in temperature, which are caused by the re-injected fluid, on the behavior of minerals (especially for the main newly-formed minerals such as quartz, calcite and clay minerals) is a critical preliminary step for the long-term prediction of their evolution. The approach used in the present work is typically based on a geochemical code, called THERMA, which enables to calculate the changes in equilibrium constants of all primary and secondary minerals and aqueous species as a function of temperature. Our model accounted for a wide range of different mineral groups in order to make sure a large freedom for the numerical calculations. The modeling results showed that when the temperature of geothermal reservoir is cooled down, quartz, calcite, illites, galena and pyrite have tendency towards equilibrium state, which indicates that they are precipitated under the geothermal conditions. In contrast, other minerals including plagioclase, K-feldspar and biotite remained unsaturated. These behaviors of minerals were further illustrated by the Khorzinsky stability

  17. Evaluation du risque de déstabilisation des infrastructures de haute montagne engendré par le réchauffement climatique dans les Alpes françaises

    OpenAIRE

    Duvillard, Pierre-Allain; Ravanel, Ludovic; Deline, Philip

    2015-01-01

    Dans le contexte du changement climatique actuel, les milieux de haute montagne sont soumis à de profonds bouleversements tels que la fonte des glaciers ou la dégradation du permafrost, à l’origine de mouvements de versant au sein des parois rocheuses comme des formations superficielles. Ces processus impliquent des risques directs de déstabilisation pour les infrastructures (refuges, remontées mécaniques, etc.). Dans un but de prévention de ces risques, un recensement des infrastructures de ...

  18. The Cigeo project - Industrial centre of deep reversible storage of radioactive wastes in Meuse/Haute-Marne - Synthesis of the commissioner's file. Public debate from the 15 May to the 15 October 2013

    International Nuclear Information System (INIS)

    2013-03-01

    This synthesis of the commissioner's file of the Cigeo project (project of an industrial center of deep reversible storage of radioactive wastes in Meuse/Haute-Marne region, France), explains the reason of the project, the waste management choices made by other countries, the planning of the project, the type and volume of wastes that will be stored at Cigeo, the operation of the facility, the reversibility aspect, the selection and sitting of the site (surface and underground installations), the safety warranties, and the socio-economic benefits of the project

  19. Lévitation magnétique par association d'aimants permanents et de supraconducteurs à haute température critique

    Science.gov (United States)

    Hiebel, P.; Tixador, P.; Chaud, X.

    1995-06-01

    Since their discovery in the years 1986/87, the high critical temperature superconductors have reached nowadays performances interesting enough to conceive passive magnetic bearings and suspensions which would combined permanent magnets and naturally stable superconducting pellets. After underlining the principal factors that affect the superconductormagnet interaction, different experimental results are given about vertical and axial forces with some stiffness values. The magnetization curve of a superconductor help to understand the hysteretic behavior of the force as a function of the distance between superconductor and magnet. So called simple and hybrid structures of superconducting magnetic suspension are presented. Finally simple numerical simulations allow to draw some interesting conclusions about both geometry and best fitting structure of permanent magnets. Depuis leur découverte dans les années 1986/87, les supraconducteurs à haute température critique ont désormais atteint des performances intéressantes et rendent envisageables des paliers et suspensions magnétiques passives associant aimants permanents et pastilles supraconductrices naturellement stables. Après avoir indiqué les termes importants influençant l'interaction supraconducteur - aimant, différents relevés expérimentaux sont donnés pour les forces verticales et transversales avec quelques valeurs de raideurs. La courbe d'aimantation d'un supraconducteur permet de comprendre le comportement hystérétique de la force en fonction de la distance supraconducteur-aimant. Les structures dites simple et hybride des suspensions magnétiques supraconductrices sont présentées. Enfin quelques simulations numériques simples permettent de dégager quelques conclusions intéressantes quant aux géométries respectives et aux structures d'aimants permanents les mieux adaptées.

  20. Scientific investigation in deep wells for nuclear waste disposal studies at the Meuse/Haute Marne underground research laboratory, Northeastern France

    Science.gov (United States)

    Delay, Jacques; Rebours, Hervé; Vinsot, Agnès; Robin, Pierre

    Andra, the French National Radioactive Waste Management Agency, is constructing an underground test facility to study the feasibility of a radioactive waste disposal in the Jurassic-age Callovo-Oxfordian argillites. This paper describes the processes, the methods and results of a scientific characterization program carried out from the surface via deep boreholes with the aim to build a research facility for radioactive waste disposal. In particular this paper shows the evolution of the drilling programs and the borehole set up due to the refinement of the scientific objectives from 1994 to 2004. The pre-investigation phase on the Meuse/Haute-Marne site started in 1994. It consisted in drilling seven scientific boreholes. This phase, completed in 1996, led to the first regional geological cross-section showing the main geometrical characteristics of the host rock. Investigations on the laboratory site prior to the sinking of two shafts started in November 1999. The sinking of the shafts started in September 2000 with the auxiliary shaft completed in October 2004. The experimental gallery, at a depth of 445 m in the main shaft, was in operation by end 2004. During the construction of the laboratory, two major scientific programs were initiated to improve the existing knowledge of the regional hydrogeological characteristics and to accelerate the process of data acquisition on the shales. The aim of the 2003 hydrogeological drilling program was to determine, at regional scale, the properties of groundwater transport and to sample the water in the Oxfordian and Dogger limestones. The 2003-2004 programs consisted in drilling nine deep boreholes, four of which were slanted, to achieve an accurate definition of the structural features.

  1. Contribution to the phenomenological study of two-body reactions at high energy; Contribution a l'etude phenomenologique des reactions a deux corps a haute energie

    Energy Technology Data Exchange (ETDEWEB)

    Cohen-Tannoudji, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    A phenomenological model suited for the description of arbitrary two-body reactions at high energies is presented and applied to the analysis of {pi} - nucleon, K - nucleon, et K-bar - nucleon scattering.The idea is that the Regge-pole model does not take into account the whole content of the unitarity relation and has to be modified, as is currently done in one-particle exchange models, so that it may include absorptive corrections.In terms of a rather economical set of free parameters,we obtain a satisfactory agreement with all available data, including the recent evidence for a nonvanishing polarization in {pi}{sup -} p {pi}{sup 0} n reaction. We then reinterpret our parametrization of the amplitudes in terms of poles and branch points in the complex angular-momentum plane for the crossed channel. (author) [French] Un modele phenomenologique adapte a la description des reactions a deux corps a haute energie est presente et applique a l'analyse des diffusions {pi} - nucleon, K - nucleon, et K-bar - nucleon. L'idee essentielle est que le modele d'echange de poles de Regge ne tient pas compte du contenu total de la relation d'unitarite et doit etre modifie, comme cela a ete propose dans le cas de l'echange de particules, de facon a tenir compte de corrections de type absortif. Au moyen d'un ensemble relativement economique de parametres libres nous obtenons un accord satisfaisant avec tous les resultats disponibles, y compris l'existence recemment mise en evidence d'une polarisation non nulle dans la reaction {pi}{sup -} p {pi}{sup 0} n. Nous interpretons notre fa n d'ecrire les amplitudes au moyen de poles et de points de branchement dans le plan complexe du moment angulaire pour la voie croisee. (auteur)

  2. Modelling of permafrost freezing and melting and the impact of glaciation on groundwater flow at the Meuse/Haute-Marne site

    International Nuclear Information System (INIS)

    Holmen, J.; Buoro, N.A.; Barret; Benabderrahmane, H.; Brulhet, J.

    2010-01-01

    Document available in extended abstract form only. The Meuse/Haute-Marne site covers an area of approximately 250 km 2 and it is located in the eastern part of the Paris Basin (200 000 km 2 ). The Callovo-Oxfordian clay formation, which is found throughout the Paris Basin, is considered as a potential host rock for France's high- and intermediate-level long-lived radioactive waste. At the project site (the Sector area), the Callovo-Oxfordian Formation is encountered at a depth of roughly 500 m, with a minimum thickness of approximately 130 m and a very low (on the order of 10-14 m/s) hydraulic conductivity. The Callovo-Oxfordian layer is confined between an overlying limestone aquifer of Jurassic-Oxfordian age and an underlying limestone of Jurassic-Dogger age. Analyses of the possible transfer of solute from the host formation into the surrounding aquifer system during the next million of years are required for safety calculations. These analyses are based on estimates of the future geomorphologic and climatic evolution of the area and on calculations of the future evolution of groundwater flow and solute transport behaviour in the units surrounding the Callovo-Oxfordian clay. To support the analyses of the future regional and local hydrogeological evolutions, a single-continuum multi-scale hydrogeological model of the Paris Basin and the Meuse/Haute-Marne sector has been developed. The model represents 27 hydrogeological units at the scale of the Paris Basin, and it is refined at the scale of the studied domain (the Sector area) to represent 27 different layers that range in age from Trias to Jurassic-Portlandian. The model has been calibrated to observed hydraulic heads. The present work deals with permafrost generation and retreat during a glacial cycle and the resulting consequences on the groundwater flow patterns within the Meuse/Haute-Marne aquifer system. The conceptual model of permafrost generation is that the pore water is frozen to create ice

  3. Applications of sub-optimality in dynamic programming to location and construction of nuclear fuel processing plant; Application de la sous-optimalite en programmation dynamique a la localisation et la cadence optimales de construction des equipements

    Energy Technology Data Exchange (ETDEWEB)

    Thiriet, L; Deledicq, A [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires, section des etudes economiques generales

    1968-09-01

    First, the point of applying Dynamic Programming to optimization and Operational Research problems in chemical industries are recalled, as well as the conditions in which a dynamic program is illustrated by a sequential graph. A new algorithm for the determination of sub-optimal politics in a sequential graph is then developed. Finally, the applications of sub-optimality concept is shown when taking into account the indirect effects related to possible strategies, or in the case of stochastic choices and of problems of the siting of plants... application examples are given. (authors) [French] On rappelle d'abord l'interet de la Programmation Dynamique dans les problemes d'optimisation et de Recherche Operationnelle dans les industries chimiques, et les conditions de representation d'un programme dynamique par un graphe sequentiel. On expose ensuite un nouvel algorithme de determination de politiques sous-optimales dans un graphe sequentiel. On montre enfin les applications du concept de sous-optimalite a la prise en compte d'effets indirects lies aux politiques possibles, aux choix dans l'aleatoire, a des problemes de localisation optimale d'usines... et on donne des exemples d'utilisation. (auteurs)

  4. Tractographie globale sous contraintes anatomiques

    OpenAIRE

    Teillac , Achille

    2017-01-01

    This work aims at developing a method inferring white matter fibers reconstructed using a global spin-glass approach constrained by anatomical prior knowledge. Unlike usual methods building fibers independently from one another, our markovian approach reconstructs the whole tractogram in an unique process by minimizing the global energy depending on the spin glass configuration (position, orientation, length and connection(s)) and the match with the local diffusion process in order to increas...

  5. Tutoriel Android sous Android Studio

    OpenAIRE

    Rodriguez , Dima

    2015-01-01

    Engineering school; Le système d’exploitation Android est actuellement l’OS le plus utilisé dans le monde faisant tourner des smartphones, tablettes, montres connectées, liseuses électroniques, télévisions interactives, et bien d'autres. C’est un système, open source qui utilise le noyau Linux. Il a été créée par Android, Inc. qui fut rachetée par Google en 2005. Le développement d’applications pour Android s’effectue en Java en utilisant des bibliothèques spécifiques. Le but de ce tutoriel e...

  6. SOUS LE PAVÉ: LA PLAGE!

    DEFF Research Database (Denmark)

    Clemmensen, Thomas Juel

    2017-01-01

    of these take their point of departure in the author’s observations of material conditions and processes on the harbor in Aarhus, which highlight the city as a geological phenomenon. But mostly the thoughts are inspired by works and ideas of artists and architects, which more or less consciously have revolved...

  7. Modélisation prospective des paysages de la Forêt Classée du Haut Sassandra (Côte d'Ivoire après la fin des conflits

    Directory of Open Access Journals (Sweden)

    Vignal, M.

    2018-01-01

    Full Text Available Landscapes Prospective Modeling of the landscapes of the Haut Sassandra Classified Forest (Côte d'Ivoire After the End of The Conflicts. It has been demonstrated that armed conflicts cause biodiversity's degradation, especially in its ecosystemic and specific dimensions. The Haut Sassandra Classified Forest is an interesting case study for this kind of process. Indeed, during the conflicts, a massive migrants infiltration caused a forest cover decline and a plant diversity loss. We created a multi-agent system able to simulate the actors' movements and behaviors. The social simulation generates scenario in the form of clearing maps in classified forest. This model was first conceived as a retro-prospective model in order to test hypotheses on the social dynamics underlying this process, after having worked on its accuracy by confronting reality. This model being validated, the aim of this paper is to present a prospective modeling to illustrate, in terms of forest cover's conservation, the possible consequences of different demographic and political scenarios. Across a geoprospective logic, two scenarios are mentioned such as the continuation of conflict period trends and a proposition of ecological restoration.

  8. Custom Type-Curve Generation for Pressure Transient Analysis of Elongated Linear Flow Systems Génération de courbes caractéristiques de réponse en pression pour des systèmes linéaires longs

    Directory of Open Access Journals (Sweden)

    Wagner P. B.

    2006-11-01

    solutions for any reservoir geometry are then readily developed for use in computer-aided type curve matching. Lorsque la zone de drainage d'un puits de production est longue et étroite, les méthodes classiques d'analyse du comportement des changements de pression ne peuvent être utilisées. De tels comportements, se prolongeant après la période pouvant être attribuée à une fracture, ont été observés pour des puits produisant de l'huile, du gaz et même pour certains puits géothermiques. La géométrie allongée, que l'on rencontre parfois dans certaines formations géothermiques et poches de gaz à grande profondeur et de faible perméabilité, peut être expliquée par des réseaux de fractures parallèles qui limitent la formation. Naturellement, les puits forés dans de telles formations peuvent traverser des fractures naturelles. Pour d'autres réservoirs, la forme allongée peut être causée par la géométrie de l'environnement dépositionnel deltaïque. Utilisant une méthode récemment développée permettant de produire des courbes caractéristiques de changement de pression pour une grande variété de géométries, le comportement particulier des puits drainant des formations allongées est présenté en détail. Les cas suivants ont été analysés : fissuration avec modification de la longueur de la fracture et diverses positions du puits dans la formation avec pénétration partielle de différentes longueurs. Les courbes sont construites directement sur le terminal. Elles prennent en compte exactement ce qui est connu de la géométrie du réservoir, de l'épaisseur, la forme, la longueur de la fissure, de la longueur de la zone perforée et de la position du puits. Des familles de courbes peuvent être générées et affichées, puis comparées aux données pour déterminer les paramètres inconnus de la géométrie du réservoir. Une contribution importante, présentée dans cet article, est le développement d'un système de param

  9. Crack Features and Shear-Wave Splitting Associated with Fracture Extension during Hydraulic Stimulation of the Geothermal Reservoir in Soultz-sous-Forêts

    Directory of Open Access Journals (Sweden)

    Adelinet M.

    2016-05-01

    Full Text Available The recent tomography results obtained within the scope of the Enhanced Geothermal System (EGS European Soultz project led us to revisit the meso-fracturing properties of Soultz test site. In this paper, we develop a novel approach coupling effective medium modeling and shear-wave splitting to characterize the evolution of crack properties throughout the hydraulic stimulation process. The stimulation experiment performed in 2000 consisted of 3 successive injection steps spanning over 6 days. An accurate 4-D tomographic image was first carried out based upon the travel-times measured for the induced seismicity [Calò M., Dorbath C., Cornet F.H., Cuenot N. (2011 Large-scale aseismic motion identified through 4-D P-wave tomography, Geophys. J. Int. 186, 1295-1314]. The current study shows how to take advantage of the resulting compressional wave (Calò et al., 2011 and shear-wave velocity models. These are given as input data to an anisotropic effective medium model and converted into crack properties. In short, the effective medium model aims to estimate the impact of cracks on velocities. It refers to a crack-free matrix and 2 families of penny-shaped cracks with orientations in agreement with the main observed geological features: North-South strike and dip of 65°East and 65°West [Genter A., Traineau H. (1996 Analysis of macroscopic fractures in granite in the HDR geothermal well EPS-1, Soultz-sous-Forêts, France, J. Vol. Geoth. Res. 72, 121-141], respectively. The resulting output data are the spatial distributions of crack features (lengths and apertures within the 3-D geological formation. We point out that a flow rate increase results in a crack shortening in the area imaged by both compressional and shear waves, especially in the upper part of the reservoir. Conversely, the crack length, estimated during continuous injection rate phases, is higher than during the increasing injection rate phases. A possible explanation for this is that

  10. Effects of Temperature and Pressure on Hot-Atom Reactions in Bromoethane; Effets de la Temperature et de la Pression sur les Reactions des Atomes Chauds dans le Bromoethane; Vliyanie temperatury i davleniya na reaktsii goryachikh atomov v bromehtane; Efectos de la Temperatura y de la Presion en las Reacciones de Atomos Calientes en el Bromoetano

    Energy Technology Data Exchange (ETDEWEB)

    Cole, A. J.; Mia, M. D.; Miller, G. E.; Shaw, P. F.D. [Nuclear Physics Laboratory, Oxford University, Oxford (United Kingdom)

    1965-04-15

    -Sign et -115 Degree-Sign C et a la pression atmospherique, ainsi qu'a la temperature de 18 Degree-Sign C et a des pressions allant jusqu'a 10{sup 4} atm. En plus des composes deja signales, ils ont trouve de faibles quantites de bromoethylene, de dibromo- 1,2-ethylene, de mono-et dibromopropanes et de mono-, di-, tri-et tetrabromobutanes; il existe en outre des indices indirects de la formation de bromobutenes. Les reactions qui dependent de la diffusion sont complexes-, on peut les expliquer en admettant qu'une pyrolyse du liquide se produit dans le voisinage de l'atome chaud et donne des radicaux bromoethyle et de l'ethylene. C'est alors a l'addition de radicaux a l'ethylene que sont dus a la fois la formation de bromures contenant plus de deux atomes de carbone et les rendements en ces bromures, qui dependent de la diffusion. D'une maniere generale, une reduction de la temperature ou un accroissement de la pression entraine une augmentation du rendement imputable a une diminution de la vitesse de diffusion. L'effet est le plus marque sur le rendement en dibromo-1, 2-ethanef qui se produit surtout par la reaction de diffusion des radicaux bromoethyle et qui est quadruple par l'application de 10{sup 4} atm du fait de la suppression de la dissociation CH{sub 2}-CH{sub 2}Br Rightwards-Arrow-Over-Leftwards-Arrow CH{sub 2} = CH{sub 2} + Br En revanche, la dissociation du radical (CH{sub 3} -CHBr) en bromoethylene et hydrogene (CH{sub 2} = CHBr + H) est impossible, et le rendement en dibromo-1,1-ethane est a peu pres independant de la pression. La variation, en fonction de la temperature et de la pression, du rendement en bromoethane pour de fortes concentrations de brome est voisine de celle qui avait ete prevue precedemment par l'un des auteurs. (author) [Spanish] Se ha estudiado el rendimiento de los compuestos que contienen {sup 80m}Br, producidos por irradiacion de mezclas de bromoetano y bromo con neutrones de 14 MeV a 18 Degree-Sign C, -80 Degree-Sign C y -115 Degree

  11. Corrosion of metallic materials by uranium hexafluoride at high temperatures (1963); Corrosion de materiaux metalliques par l'hexafluorure d'uranium a haute temperature (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Langlois, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    trop rapidement pour pouvoir etre utilises au-dela de 500 deg. C, le monel et surtout le nickel paraissant seuls susceptibles de presenter une tenue acceptable aux hautes temperatures. L'etude detaillee du comportement du nickel met en evidence la volatilisation du fluorure metallique et son influence sur la vitesse de corrosion. D'autre part, elle revele l'existence d'une zone de temperature, comprise entre 550 et 700 deg. C dans laquelle se manifeste une Intense corrosion intergranulaire, dont la cause semble etre la presence d'impuretes au sein du metal. (auteur)

  12. Method for estimating potential wetland extent by utilizing streamflow statistics and flood-inundation mapping techniques: Pilot study for land along the Wabash River near Terre Haute, Indiana

    Science.gov (United States)

    Kim, Moon H.; Ritz, Christian T.; Arvin, Donald V.

    2012-01-01

    Potential wetland extents were estimated for a 14-mile reach of the Wabash River near Terre Haute, Indiana. This pilot study was completed by the U.S. Geological Survey in cooperation with the U.S. Department of Agriculture, Natural Resources Conservation Service (NRCS). The study showed that potential wetland extents can be estimated by analyzing streamflow statistics with the available streamgage data, calculating the approximate water-surface elevation along the river, and generating maps by use of flood-inundation mapping techniques. Planning successful restorations for Wetland Reserve Program (WRP) easements requires a determination of areas that show evidence of being in a zone prone to sustained or frequent flooding. Zone determinations of this type are used by WRP planners to define the actively inundated area and make decisions on restoration-practice installation. According to WRP planning guidelines, a site needs to show evidence of being in an "inundation zone" that is prone to sustained or frequent flooding for a period of 7 consecutive days at least once every 2 years on average in order to meet the planning criteria for determining a wetland for a restoration in agricultural land. By calculating the annual highest 7-consecutive-day mean discharge with a 2-year recurrence interval (7MQ2) at a streamgage on the basis of available streamflow data, one can determine the water-surface elevation corresponding to the calculated flow that defines the estimated inundation zone along the river. By using the estimated water-surface elevation ("inundation elevation") along the river, an approximate extent of potential wetland for a restoration in agricultural land can be mapped. As part of the pilot study, a set of maps representing the estimated potential wetland extents was generated in a geographic information system (GIS) application by combining (1) a digital water-surface plane representing the surface of inundation elevation that sloped in the downstream

  13. Etude de la performance des radars hautes-frequences CODAR et WERA pour la mesure des courants marins en presence partielle de glace de mer

    Science.gov (United States)

    Kamli, Emna

    Les radars hautes-frequences (RHF) mesurent les courants marins de surface avec une portee pouvant atteindre 200 kilometres et une resolution de l'ordre du kilometre. Cette etude a pour but de caracteriser la performance des RHF, en terme de couverture spatiale, pour la mesure des courants de surface en presence partielle de glace de mer. Pour ce faire, les mesures des courants de deux radars de type CODAR sur la rive sud de l'estuaire maritime du Saint-Laurent, et d'un radar de type WERA sur la rive nord, prises pendant l'hiver 2013, ont ete utilisees. Dans un premier temps, l'aire moyenne journaliere de la zone ou les courants sont mesures par chaque radar a ete comparee a l'energie des vagues de Bragg calculee a partir des donnees brutes d'acceleration fournies par une bouee mouillee dans la zone couverte par les radars. La couverture des CODARs est dependante de la densite d'energie de Bragg, alors que la couverture du WERA y est pratiquement insensible. Un modele de fetch appele GENER a ete force par la vitesse du vent predite par le modele GEM d'Environnement Canada pour estimer la hauteur significative ainsi que la periode modale des vagues. A partir de ces parametres, la densite d'energie des vagues de Bragg a ete evaluee pendant l'hiver a l'aide du spectre theorique de Bretschneider. Ces resultats permettent d'etablir la couverture normale de chaque radar en absence de glace de mer. La concentration de glace de mer, predite par le systeme canadien operationnel de prevision glace-ocean, a ete moyennee sur les differents fetchs du vent selon la direction moyenne journaliere des vagues predites par GENER. Dans un deuxieme temps, la relation entre le ratio des couvertures journalieres obtenues pendant l'hiver 2013 et des couvertures normales de chaque radar d'une part, et la concentration moyenne journaliere de glace de mer d'autre part, a ete etablie. Le ratio des couvertures decroit avec l'augmentation de la concentration de glace de mer pour les deux types

  14. Les anophèles et la transmission du paludisme à Ambohimena, village de la marge occidentale des Hautes-Terres Malgaches

    Directory of Open Access Journals (Sweden)

    Rajaonarivelo V.

    2004-03-01

    Full Text Available Une étude a été menée dans le Moyen-Ouest de Madagascar à 940 mètres d'altitude dans le village d'Ambohimena. Ce village est situé en dehors de la zone d'aspersions intra-domiciliaires d'insecticides rémanents. Deux vecteurs, An. funestus Giles, 1900 et An. arabiensis Patton, 1905 y sont présents. An. funestus est abondant au cours de la saison chaude et humide, avec deux pics d'abondance en décembre et avril. L'endophagie d' An. funestus est faible (taux d'endophagie = 35,3 % . C'est une espèce endophile (Taux d'endophilie = 78 % et anthropophile (taux d'anthropophilie = 64 %. Son infectivité est faible (taux d'infectivité = 0,20 %. Le taux d'inoculation spécifique de Plasmodium falciparum par l'espèce An. funestus a été de moins de 10 piqûres par homme et par an. Cette espèce présente une capacité vectrice maximale à la fin du premier tour de riz (janvier alors que son abondance maximale est observée à la fin du deuxième tour (avril-mai An. arabiensis est abondant entre décembre et janvier et est lié à la présence des gîtes pluviaux favorables au développement larvaire. C'est une espèce exophage (taux d'endophagie = 27,5 % et zoophile (taux d'anthropophilie = 7,8 %. An. arabiensis jouerait un rôle secondaire dans la transmission du paludisme car la présence des plasmodies n'a pas été mise en évidence (effectif testé = 871. Dans ce village, la stabilité du paludisme est modérée ou intermédiaire ; plus proche de l'instabilité que de la stabilité avérée. Il est suggéré que la lutte antivectorielle soit étendue aux zones de transition stabilité-instabilité qui constitueraient un réservoir de vecteurs et de plasmodies, afin de prévenir l'émergence de nouvelles épidémies sur les Hautes-Terres.

  15. Towards a Highly Efficient Meshfree Simulation of Non-Newtonian Free Surface Ice Flow: Application to the Haut Glacier d'Arolla

    Science.gov (United States)

    Shcherbakov, V.; Ahlkrona, J.

    2016-12-01

    In this work we develop a highly efficient meshfree approach to ice sheet modeling. Traditionally mesh based methods such as finite element methods are employed to simulate glacier and ice sheet dynamics. These methods are mature and well developed. However, despite of numerous advantages these methods suffer from some drawbacks such as necessity to remesh the computational domain every time it changes its shape, which significantly complicates the implementation on moving domains, or a costly assembly procedure for nonlinear problems. We introduce a novel meshfree approach that frees us from all these issues. The approach is built upon a radial basis function (RBF) method that, thanks to its meshfree nature, allows for an efficient handling of moving margins and free ice surface. RBF methods are also accurate and easy to implement. Since the formulation is stated in strong form it allows for a substantial reduction of the computational cost associated with the linear system assembly inside the nonlinear solver. We implement a global RBF method that defines an approximation on the entire computational domain. This method exhibits high accuracy properties. However, it suffers from a disadvantage that the coefficient matrix is dense, and therefore the computational efficiency decreases. In order to overcome this issue we also implement a localized RBF method that rests upon a partition of unity approach to subdivide the domain into several smaller subdomains. The radial basis function partition of unity method (RBF-PUM) inherits high approximation characteristics form the global RBF method while resulting in a sparse system of equations, which essentially increases the computational efficiency. To demonstrate the usefulness of the RBF methods we model the velocity field of ice flow in the Haut Glacier d'Arolla. We assume that the flow is governed by the nonlinear Blatter-Pattyn equations. We test the methods for different basal conditions and for a free moving

  16. Corrosion of metallic materials by uranium hexafluoride at high temperatures (1963); Corrosion de materiaux metalliques par l'hexafluorure d'uranium a haute temperature (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Langlois, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    precieux et l'inconel sont attaques beaucoup trop rapidement pour pouvoir etre utilises au-dela de 500 deg. C, le monel et surtout le nickel paraissant seuls susceptibles de presenter une tenue acceptable aux hautes temperatures. L'etude detaillee du comportement du nickel met en evidence la volatilisation du fluorure metallique et son influence sur la vitesse de corrosion. D'autre part, elle revele l'existence d'une zone de temperature, comprise entre 550 et 700 deg. C dans laquelle se manifeste une Intense corrosion intergranulaire, dont la cause semble etre la presence d'impuretes au sein du metal. (auteur)

  17. Contribution of the low cycle fatigue on ultra high purity Ni-Cr-Fe alloys and on Ni monocrystals to the understanding of the hydrogen role in stress corrosion cracking for the alloys 600 and 690; Apport de la fatigue oligocyclique sur alliages Ni-Cr-Fe d'ultra haute purete et sur monocristaux de Ni a la comprehension sous contrainte des alliages 600 et 69O

    Energy Technology Data Exchange (ETDEWEB)

    Renaudot, N

    1999-06-01

    We discuss the role of hydrogen in cracking of Ni base alloys used for pressurised water reactor (PWR) primary tubes (alloy 600 and 690). Cracking can be explained by a Stress Corrosion Cracking (SCC) phenomenon. For this purpose, Low cycle fatigue (R = - 1) under cathodic charging at room temperature is conducted to study hydrogen effects on propagation of cracks mechanically initiated by the formation of Persistent Slip Bands (PSB). Low cycle fatigue on Ultra High Purity specimens (Ni, alloy 600 and 690) reveals the very important hydrogen effect on crack propagation rate, whatever the Cr content in the Ni base alloy. If Cr seems to have an effect over-hydrogen penetration in specimens (by a protective film formation), it have no beneficial effect when hydrogen have diffused ahead of a crack tip. Propagation rates (transgranular or intergranular) are highly increased, no matter of the absence of impurities like sulphur. Then, in PWR, the difference in the behaviour of alloy 600 and 690 could be due to a slower microcrack propagation rate for alloy 690. Protective films could play an important role in this difference, which is to study. Low cycle fatigue on Ni single crystals oriented for single slip shows, for the first time on bulk specimen, a macroscopic softening which can be explained. by hydrogen-dislocation interactions. Moreover, a simple quantitative model based on these interactions results in the same softening as the one observed experimentally. These results allow to validate experimentally one of the most important steps in the 'Corrosion Enhanced Plasticity (CEP) model', i.e. the softening ahead of a stress corrosion crack tip by hydrogen dislocation interactions. This is of importance because this model can explain cracking in numerous FCC materials-environment couple. (author)

  18. Contribution to the study of {sup 233}U production with MOX-ThPu fuel in PWR reactor. Transition scenarios towards Th/{sup 233}U iso-generating concepts in thermal spectrum. Development of the MURE fuel evolution code; Contribution a l'etude de la production d'{sup 233}U en combustible MOX-ThPu en reacteur a eau sous pression. Scenarios de transition vers des concepts isogenerateurs Th/{sup 233}U en spectre thermique. Developpement du code MURE d'evolution du combustible

    Energy Technology Data Exchange (ETDEWEB)

    Michel-Sendis, F

    2006-12-15

    If nuclear power is to provide a significant fraction of the growing world energy demand, only through the breeding concept can the development of sustainable nuclear energy become a reality. The study of such a transition, from present-day nuclear technologies to future breeding concepts is therefore pertinent. Among these future concepts, those using the thorium cycle Th/U-233 in a thermal neutron spectrum are of particular interest; molten-salt type thermal reactors would allow for breeding while requiring comparatively low initial inventories of U-233. The upstream production of U-233 can be obtained through the use of thorium-plutonium mixed oxide fuel in present-day light water reactors. This work presents, firstly, the development of the MURE evolution code system, a C++ object-oriented code that allows the study, through Monte Carlo (M.C.) simulation, of nuclear reactors and the evolution of their fuel under neutron irradiation. The M.C. methods are well-suited for the study of any reactor, whether it'd be an existing reactor using a new kind of fuel or a future concept altogether, the simulation is only dependent on nuclear data. Exact and complex geometries can be simulated and continuous energy particle transport is performed. MURE is an interface with MCNP, the well-known and validated transport code, that allows, among other functionalities, to simulate constant power and constant reactivity evolutions. Secondly, the study of MOX ThPu fuel in a conventional light water reactor (REP) is presented; it explores different plutonium concentrations and isotopic qualities in order to evaluate their safety characteristics. Simulation of their evolution allows us to quantify the production of U-233 at the end of burnup. Last, different french scenarios validating a possible transition towards a park of thermal Th/U-233 breeders, are presented. In these scenarios, U-233 is produced in ThPu moxed light water reactors. (author)

  19. Contribution to the study of {sup 233}U production with MOX-ThPu fuel in PWR reactor. Transition scenarios towards Th/{sup 233}U iso-generating concepts in thermal spectrum. Development of the MURE fuel evolution code; Contribution a l'etude de la production d'{sup 233}U en combustible MOX-ThPu en reacteur a eau sous pression. Scenarios de transition vers des concepts isogenerateurs Th/{sup 233}U en spectre thermique. Developpement du code MURE d'evolution du combustible

    Energy Technology Data Exchange (ETDEWEB)

    Michel-Sendis, F

    2006-12-15

    If nuclear power is to provide a significant fraction of the growing world energy demand, only through the breeding concept can the development of sustainable nuclear energy become a reality. The study of such a transition, from present-day nuclear technologies to future breeding concepts is therefore pertinent. Among these future concepts, those using the thorium cycle Th/U-233 in a thermal neutron spectrum are of particular interest; molten-salt type thermal reactors would allow for breeding while requiring comparatively low initial inventories of U-233. The upstream production of U-233 can be obtained through the use of thorium-plutonium mixed oxide fuel in present-day light water reactors. This work presents, firstly, the development of the MURE evolution code system, a C++ object-oriented code that allows the study, through Monte Carlo (M.C.) simulation, of nuclear reactors and the evolution of their fuel under neutron irradiation. The M.C. methods are well-suited for the study of any reactor, whether it'd be an existing reactor using a new kind of fuel or a future concept altogether, the simulation is only dependent on nuclear data. Exact and complex geometries can be simulated and continuous energy particle transport is performed. MURE is an interface with MCNP, the well-known and validated transport code, that allows, among other functionalities, to simulate constant power and constant reactivity evolutions. Secondly, the study of MOX ThPu fuel in a conventional light water reactor (REP) is presented; it explores different plutonium concentrations and isotopic qualities in order to evaluate their safety characteristics. Simulation of their evolution allows us to quantify the production of U-233 at the end of burnup. Last, different french scenarios validating a possible transition towards a park of thermal Th/U-233 breeders, are presented. In these scenarios, U-233 is produced in ThPu moxed light water reactors. (author)

  20. Groundwater flow reference model of the Meuse/Haute-Marne region: implications on performance analysis of high and intermediate level and long lived radwaste repository in clay formation

    International Nuclear Information System (INIS)

    Benabderrahmane, H.; Plas, F.; Yven, B.; Cornaton, F.; Perrochet, P.; Kerrou, J.; Stucki, J.; Caloz, P.

    2010-01-01

    Document available in extended abstract form only. An integrated multi-scale hydrogeological conceptual model of the Paris basin and the Meuse/Haute-Marne sector was developed to study the groundwater flow and solute transport behaviour in the multi-layered aquifer system and around the Callovo-Oxfordian clay formation as potential host for the French high and intermediate level and long lived radioactive waste. The Paris basin system (200000 km 2 ) consists of 27 aquiferous and semi-permeable (aquitard) hydrogeological units from Trias to Quaternary affected by 80 regional faults. It produces boundary conditions to the refined aquifer system of the 250 km 2 Meuse/Haute-Marne site, which includes 27 layers from Trias to Portlandian. The Callovo-Oxfordian clay formation is located at a mean depth of 500 m, with a minimum thickness of 130 m and hydraulic conductivity values of the order of 10-14 m/s. The numerical steady-state flow solution is calculated on a finite element mesh of about 3 million 2-D and 3-D linear elements (GEOS-CHYN 2009). At the top surface, the mesh refinement (250 m to 50 m) is locally constrained by the fault lineaments and the river network. At depth, it takes into account the 10 m to 500 m throw of the faults and the vertical flow through semi-permeable units. Triangular elements are used to represent a top surface layer that includes the weathered part of the outcropping formations, and quadrangular elements allow for the representation of the faults planes at depth. The layers are discretized into 6-nodded wedge elements, while 4-nodded tetrahedrons and 5-nodded pyramids are used to handle the pinching and the outcrop of the layers. The flow boundary conditions and source-sink terms are: - Specified hydraulic heads (Dirichlet) along the rivers and elsewhere on the top surface inflow fluxes (Neumann) derived from hydrological balance (with a mean inflow of 240 mm/year). - Specified hydraulic heads (Dirichlet) at the Manche coast side. - No

  1. Sous-produits de la désinfection dans l'eau potable des petits réseaux municipaux: variabilité spatio-temporelle, modélisation et stratégies de suivi

    OpenAIRE

    Guilherme, Stéphanie

    2014-01-01

    Les trihalométhanes (THM) et les acides haloacétiques (AHA) constituent les seules familles réglementées de sous-produits de la désinfection (SPD). Les SPD sont des composés issus de la réaction de la matière organique naturelle présente dans l’eau et du désinfectant lors du traitement de l’eau potable. La plupart de ces composés ne sont pas réglementés, même si plusieurs études ont montré que certains SPD peuvent présenter un risque toxicologique plus important que les THM et les AHA. De nos...

  2. Méthode multi-échelle pour la modélisation du flambage des tôles minces sous contraintes résiduelles - Application au laminage

    OpenAIRE

    Nakhoul , Rebecca; Montmitonnet , Pierre; Potier-Ferry , Michel

    2013-01-01

    National audience; Dans le laminage à froid, l'apparition d'une distribution hétérogène de contraintes résiduelles peut engendrer le flambage de la tôle laminée, entraînant un " défaut de planéité ". L'objectif est de définir un modèle macroscopique simple décrivant les modes et amplitudes de flambage d'une tôle sous l'effet des contraintes résiduelles issues du laminage. Le présent article présente une nouvelle méthode bi-échelle [1,2] comme une alternative du modèle de flambage développé da...

  3. Seminar on the news energy utilization in rural area of April 3 to March 24 , 1980 in Reo, Upper Volta[Energie renouvelable ; Zone rurale ; Gaz biologique ; Energie solaire ; Sechoir solaire]; Seminaire sur l'utilisation des energies nouvelles en zone rurale du 24 mars au3 avril 1980 a Reo, Haute Volta

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-04-15

    volume of transport much more reduced. Mastering these new technologies will help fight efficiently against desertification, and fruits and vegetables rotting. [French] L'acces a l'energie par toutes les populations reste une des preoccupations du Gouvernement de Haute Volta (Burkina Faso). C'est ainsi que sous l'egide de la Communaute Economique de l Afrique de l'Ouest (CEAO), de l'Agence Canadienne de Developpement International et du Mouvement Scout, un seminaire sur l'utilisation des energies renouvelables en zone rurale y a ete organise. Il s'agit pour les participants venus de plusieurs pays, d'apprendre a mettre en pratique, l'utilisation des energies nouvelles telles la cuisiniere a feu ferme, le gaz biologique, le chauffe- eau solaire et le sechoir solaire. L'adoption de ces nouvelles sources d'energie par les populations permettrait de pallier les problemes de desertification lies au deboisement intensif dans le pays. Tous les participants a cette rencontre sont donc sensibilises pour qu'ils apportent leur contribution et celle des populations de leurs terroirs respectifs pour une meilleure conservation des ressources naturelles disponibles. Cela passe aussi par la construction de cuisinieres a feu ferme qui permettent d'avoir deux sources d'energie. Ce type de foyer est d'une construction facile et utilisable seulement trois jours apres. Il permet d'eviter la perte d'energie qui caracterisait le foyer traditionnel (pres de 95% de perte d'energie) ; ce qui revient a consommer moins de bois tout en assurant un rendement de l'ordre de 60 a 70%. Il s'est agi pour les participants aux travaux de s'initier a l'installation de gaz suivant des modeles chinois et indien . Ils ont donc ete inities a la realisation des technologies de production de gaz biologique a travers la maitrise du schema de principe du procede de fermentation discontinue. De meme, ils ont acquis le savoir- faire sur les techniques de mise en place du chauffe- eau solaire par insolateur et du

  4. Sub-critical installations for continuous evaporations of up to 200 litres/hour - description and experimental results; Installations sous-critiques d'evaporation continue jusqu'a 200 litres/heure - description et resultats experimentaux

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, P; Bouzou, G C; Sautray, R R; Jacquotte, M C [Commissariat a l' Energie Atomique, Marcoule (France). Centre de Production de Plutonium de Marcoule

    1965-07-01

    In this report are given a detailed technological description and the test results obtained with two continuous evaporation units, one of 16 l/hr, the other of 65 l/hr. These installations are sub-critical with multiplication factors (k{sub eff}) for total reflection of 0.73 and 0.77. A third evaporator of 200 litres, also sub-critical (k{sub eff} = 0.90), is given as the limiting possible case. A description is also given of simple devices without regulator for maintaining a constant level in an extra flat, separator thus making it possible to operate without supervision in perfect safety at any concentration factor. The liberal thermal characteristics and the simple operational principles constitute a sure guarantee for operation in {alpha} and {gamma} conditions. (authors) [French] Dans ce rapport, on trouvera la description technologique detaillee et les resultats obtenus au cours des essais, de deux installations d'evaporation en continu, l'une de 16 l/h, l'autre de 65 l/h. Ces installations sont sous-critiques avec des facteurs de multiplication (k{sub eff}) en reflexion totale de 0,73 et 0,77. Un troisieme evaporateur, de 200 l/h, egalement sous-critique (k{sub eff} = 0,90), est donne comme cas limite realisable. On trouvera aussi la description de dispositifs simples, sans regulateur, permettant de garder un niveau constant dans un separateur extra-plat, ce qui permet une marche sans surveillance, en toute securite, a tous les facteurs de concentration. Les caracteristiques thermiques non poussees et les principes de fonctionnement simples, sont une garantie certaine pour l'exploitation en milieu {alpha} et {gamma}. (auteurs)

  5. Migration agricole et usages durables de la terre dans la zone de transition forêt-savane (Ghana)

    NARCIS (Netherlands)

    van der Geest, K.

    2010-01-01

    Au Ghana, d’après des images satellites, la zone de transition entre la forêt et la savane a subi en trente ans une profonde dégradation environnementale. La forte immigration de cultivateurs du Haut Ghana occidental, accentuant une rapide croissance démographique, a accru la pression sur les

  6. Quelques noddees sur l’ecologie de la vedetation des dunes et sur la fonction de l’enraciment dans l’edification de dunes a la Cote Mediterraneenne de la France. I

    NARCIS (Netherlands)

    Boterenbrood, A.J.; Donsellaar-Ten Bokkel Huinink, van W.A.E.; Donselaar, van J.

    1956-01-01

    Dans la végétation des dunes du Languedoc J. BRAUN-BLANQUET (1952) distingue trois associations, à savoir; 1) l’Agropyretum mediterraneum parmi et sur les premières dunes basses; 2) l’Ammophiletum arundinaceae sur les dunes plus hautes; et 3) le Crucianelletum maritimae dans les dépressions et en

  7. Experimental study and modeling of the propagation of an alkaline concentration wave coming from a cement matrix an passing through the argilite of the Meuse / Haute-Marne laboratory; Etude experimentale et modelisation de la propagation d'une onde de concentration alcaline issue d'une matrice cimentiere a travers l'argilite du site du laboratoire Meuse / Haute-Marne

    Energy Technology Data Exchange (ETDEWEB)

    Roussel, Th

    2001-12-01

    The propagation of an alkaline wave through a clay rock has been investigated- The wave is generated by a cementitious matrix through the Callovo-Oxfordian argillite of the Meuse Haute-Marne Laboratory (-480 m depth). The argillite itself is composed of quartz, micas, calcite and an interstratified l/S. In order to characterise the interactions between the alkaline fluid and the argillaceous medium, dynamic column experiments have been carried out. The originality of the investigation methodology consists in exploiting the data generated from the breakthrough curves as well as from the characterisation of the solids extracted from the columns. Two types of processes having totally different reaction times have hence been thoroughly studied: - Fast surface adsorption and condensation reactions: On the one hand cation adsorption reactions by site ionisation have been characterised. They are responsible of the buffering effect of the clays. On the other hand an original reaction of calcium compound condensation in the interlayer space of the swelling clays has been revealed. These processes have been modelled and their simulations with the IMPACT calculation code showed that the models elaborated were very satisfying. - Strongly kinetically limited dissolution/precipitation reactions: The main primary phases dissolved are quartz and interstratified l/S. The precipitation of secondary phases are mainly C(A)SH and zeolites. After the injection of an alkaline fluid for 6 months at 60 deg C, the argillite is strongly amorphized but only 20 to 30% of the quartz and the interstratified I/S are dissolved. Therefore, dissolution kinetics of the primary phases and the solubility products of the main secondary phases have been determined. (author)

  8. Forced convection of ammonia. 2. part.: gaseous ammonia - very high wall temperatures (1000 to 3000 K); Convection forcee de l'ammoniac. 2. partie: ammoniac gazeux - cas de tres hautes temperatures de paroi (1000 a 3000{sup 0} K)

    Energy Technology Data Exchange (ETDEWEB)

    Perroud, P.; Rebiere, J.; Strittmatter, R. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    Heat transfer coefficients and pressure drop of gaseous ammonia in forced convection are experimentally determined. The fluid flows (mass flow rate 0.6 to 2.4 g/s) in a long tungsten tube (d{sub i} = 2.8 mm, d{sub e} = 5.1 mm, L = 700 mm) electrically heated. The temperature of the wall reaches 3000 deg. K and the fluid 2500 deg. K; maximum heat flux 530 w/cm{sup 2}. Ammonia is completely dissociated and the power necessary for dissociation reaches 30 per cent of the total power exchanged. Inlet pressure varies between 6 and 16 bars and the maximum pressure drop in the tube reaches 15 bars. Two regimes of dissociation have been shown: catalytic and homogeneous and the variation of dissociation along the length of the tube is studied. The measured heat transfer coefficients may be about 10 times these calculated by the means of classical formulae. A correlation of experimental results using enthalpy as a driving force for heat transmission is presented. Pressure drops may be calculated by the means of a classical friction factor. (authors) [French] On determine experimentalement les coefficients d'echange thermique et les pertes de charge de l'ammoniac gazeux en convection forcee. Le fluide circule avec un debit en masse compris entre 0.6 et 2.4 g/s (G = 10 a 40 g/cm{sup 2}.s) dans un tube long en tungstene (d{sub i} = 2.8 mm, d{sub e} = 5.1 mm, L = 700 mm), chauffe electriquement. La temperature de paroi atteint 3000 deg. K, celle du fluide 2500 deg. K et le flux de chaleur maximal est de 530 W/cm{sup 2}. L'ammoniac se dissocie completement, la puissance correspondant a la dissociation atteint 30 pour cent de la puissance totale echangee. La pression d'entree varie entre 6 et 16 bars et la chute de pression maximale dans le canal est de 15 bars. On distingue deux regimes de dissociation, catalytique et homogene, et on etudie la variation du taux de dissociation en fonction de la longueur du tube. Les coefficients d'echange thermique mesures

  9. Forced convection of ammonia. 2. part.: gaseous ammonia - very high wall temperatures (1000 to 3000 K); Convection forcee de l'ammoniac. 2. partie: ammoniac gazeux - cas de tres hautes temperatures de paroi (1000 a 3000{sup 0} K)

    Energy Technology Data Exchange (ETDEWEB)

    Perroud, P; Rebiere, J; Strittmatter, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    Heat transfer coefficients and pressure drop of gaseous ammonia in forced convection are experimentally determined. The fluid flows (mass flow rate 0.6 to 2.4 g/s) in a long tungsten tube (d{sub i} = 2.8 mm, d{sub e} = 5.1 mm, L = 700 mm) electrically heated. The temperature of the wall reaches 3000 deg. K and the fluid 2500 deg. K; maximum heat flux 530 w/cm{sup 2}. Ammonia is completely dissociated and the power necessary for dissociation reaches 30 per cent of the total power exchanged. Inlet pressure varies between 6 and 16 bars and the maximum pressure drop in the tube reaches 15 bars. Two regimes of dissociation have been shown: catalytic and homogeneous and the variation of dissociation along the length of the tube is studied. The measured heat transfer coefficients may be about 10 times these calculated by the means of classical formulae. A correlation of experimental results using enthalpy as a driving force for heat transmission is presented. Pressure drops may be calculated by the means of a classical friction factor. (authors) [French] On determine experimentalement les coefficients d'echange thermique et les pertes de charge de l'ammoniac gazeux en convection forcee. Le fluide circule avec un debit en masse compris entre 0.6 et 2.4 g/s (G = 10 a 40 g/cm{sup 2}.s) dans un tube long en tungstene (d{sub i} = 2.8 mm, d{sub e} = 5.1 mm, L = 700 mm), chauffe electriquement. La temperature de paroi atteint 3000 deg. K, celle du fluide 2500 deg. K et le flux de chaleur maximal est de 530 W/cm{sup 2}. L'ammoniac se dissocie completement, la puissance correspondant a la dissociation atteint 30 pour cent de la puissance totale echangee. La pression d'entree varie entre 6 et 16 bars et la chute de pression maximale dans le canal est de 15 bars. On distingue deux regimes de dissociation, catalytique et homogene, et on etudie la variation du taux de dissociation en fonction de la longueur du tube. Les coefficients d'echange thermique mesures peuvent etre environ 10

  10. Étude des distributions de contraintes autour d'un puits pétrolier. Application au calcul des pressions d'initiation de fracturation hydraulique Research on Stress Distribution Around an Oil Or Gas Well. Application to Calculating Pressures for Initiating Hydraulic Fracturing

    Directory of Open Access Journals (Sweden)

    Skoczylas F.

    2006-11-01

    Full Text Available Des méthodes de résolution analytiques et numériques ont été proposées, pour déterminer les distributions de contraintes autour de forages pétroliers dans le cas de matériaux peu résistants. Le calcul de ces distributions aboutit à la détermination des pressions de fracturation. Le critère de plasticité de Mohr-Coulomb a été choisi pour la résolution analytique. Cette étude permet d'établir trois schémas types de distribution de contraintes, au moment de la fracturation, pour un régime permanent d'écoulement. La géométrie axisymétrique du modèle a permis d'utiliser une méthode numérique par schéma aux différences finies. La loi de comportement du matériau est déduite du critère de plasticité de Drucker. Cette résolution permet le chargement incrémental en pression dans le forage et de simuler une injection rapide par un couplage simplifié fluide-squelette. Le modèle élastoplastique à deux surfaces de charge de Lade-Shao a finalement été retenu pour décrire l'écrouissage du matériau. La comparaison des résultats des différentes méthodes de calcul s'effectue sur la base de l'influence respective du coefficient de poussée au repos Ko, du coefficient de Poisson et de la résistance à la compression, Co, du matériau. Analytical and numerical methods are proposed, in order to determine stresses distribution around borehole for axisymetric problems in the case of low strengh materials. Calculation of these distributions leads to the determination of hydraulic fracture-pressure. Analytical solutions were found in the case of Mohr-Coulomb criterion and steady flow. These solutions leads to three typical stresses distributions when hydraulic fracture takes place. Because problem's axisymetry, the finite difference method was used. The constitutive law was deduced using Drücker plasticity criterion with an associated flow rule for elastic perfectly plastic behaviour. Such a numerical method can take into

  11. IRSN's opinion on criteria retained by the ANDRA for choosing a 'zone of interest for deepened investigation' (ZIRA, zone d'interet pour la reconnaissance approfondie) for the HA-MAVL-Site de Meuse/Haute-Marne project

    International Nuclear Information System (INIS)

    2009-12-01

    Within the context of selection of a site for a future deep storage for high- and intermediate-level activity and long life wastes, this report comments the various results of geological investigations and characterizations performed on this site during the past years. It notices that the most recent results (2007 and 2008) do not put previous conclusions (2005) into question. It recalls the required geological characteristics for such a storage site and compares them with the site characteristics. The IRSN agrees with the technical criteria adopted by the ANDRA for the choice of a zone of interest for a deepened investigation, and more particularly for this particular zone located on the territory of both French departments of Meuse and Haute-Marne

  12. Multiplexeurs numériques haut débit sur arséniure de gallium pour des applications au-delà de 1,5 Gbit/s

    OpenAIRE

    Kamdem , J.; Le Rouzic , M.; Thébault , C.

    1988-01-01

    Deux types de circuits intégrés GaAs de multiplexage haut débit (multiplexeurs à rang fixe et à rang programmable sur 2, 3 ou 4 entrées), capables de fournir des débits numériques jusqu'à 1,9 Gbit/s, ont été conçus et réalisés en logique BFL à grille de 1 μm. On présente ici la méthode de conception mise en oeuvre, et les performances des circuits obtenus. L'architecture de ces multiplexeurs est basée sur des compteurs de type Johnson, sans logique d'établissement de cycle, utilisant des basc...

  13. Modelling of permafrost freezing and melting and the impact of a climatic cycle on groundwater flow at the Meuse/Haute-Marne site

    International Nuclear Information System (INIS)

    Holmen, J.; Benabderrahmane, H.; Buoro, A.; Brulhet, J.

    2011-01-01

    A fully coupled three-dimensional groundwater flow and heat transport (convection-conduction) model has been developed, including permafrost. The model covers the entire Paris basin and is focused on the Meuse/Haute-Marne Sector area and the Bure investigation site. The model was calibrated on the basis of the present hydro-thermal situation. The studied time period corresponds to what is considered a typical climatic cycle of length 130,000 year. A build-up of a superficial glacial ice mass is not included in the model; it is assumed that accumulated snow will melt during the summer months. The temperature boundary condition on top of the model is specified as a time-varying surface temperature. The temperatures are derived from an estimate of the future climatic evolution. It is the changes with time of the prescribed temperatures along the topography that drives all changes in groundwater flow, temperature and permafrost inside the model. The simulations are transient, but the initial condition of the base case represents a steady state situation. The simulated time period, for reaching a steady state situation of groundwater flows and temperatures in the deep and highly permeable layers of the Dogger (in the Sector area) is considerable (in the range of 50,000. years), depending on perturbation studied (e.g. a change in surface temperature of 5 deg.) and convergence criteria. The simulated depth of the permafrost varies in space and time during the studied glacial periods. Within the area studied (the Sector area), the simulated permafrost reaches a maximum depth of approx. 110 m. This is a median depth taking into account the spatial distribution of the permafrost. The lowest simulated temperature in the lower parts of the Callovo-Oxfordian clay stone, in the immediate vicinity of the Bure investigation site (in the Sector area), is approx. 14.5 deg. C, which is approx. 7.5 deg. C lower than the initial temperature (22 deg. C). A full reversion back to the

  14. Contribution to the study of the conductivity of high purity water; Contribution a l'etude de la conductivite de l'eau de haute purete

    Energy Technology Data Exchange (ETDEWEB)

    Nens, Ch [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    In this work a study is made more particularly of two points: the production of high purity water and the estimation of this purity by means of conductivity measurements. As far as water purification is concerned it is observed that the de-ionisation produced by ion exchange resins in mixed beds leads to a water having a lower conductivity than that obtained by distillation. This low conductivity however, measured at the column exit before the water comes into contact with air is not stable. In fact the carbon dioxide in the water gives rise to an equilibrium with production of the ions HCO{sub 3}{sup -}, CO{sub 3}{sup --}. These ions are retained during the passage of the water through the resins. They reappear again at the column exit as a result of the displacement of the hydration equilibrium of CO{sub 2}; because of this the conductivity of the water increases with time. The water obtained by successive distillations does not behave in the same way because no carbon dioxide is present. Distillation is however a costly purification process on an industrial scale, especially if large quantities of water have to be treated. The measurement of these low conductivities is very delicate. The method employed makes use of a direct current and gives reproducible results if care is taken to exclude interfering electric fields by screening the apparatus. (author) [French] Au cours de ce travail nous etudions plus particulierement deux points: l'obtention d'eau de haute purete et l'estimation de cette purete grace a la mesure de sa conductivite. En ce qui concerne la purification de l'eau nous constatons que la deionisation effectuee par les resines echangeuses d'ions en lits melanges conduit a l'obtention d'une eau de conductivite plus faible que celle recueillie par distillations. Mais cette faible conductivite, mesuree a l'abri de l'air immediatement a la sortie de la colonne, n'est pas stable. En effet, dans l'eau, le gaz carbonique donne lieu a l'etablissement d

  15. Research with a Natural-Uranium Light-Water Subcritical Assembly; Recherches au Moyen d'un Ensemble Sous-Critique a Uranium Naturel et a Eau Ordinaire; Issledovaniya na podkriticheskoj sborke,rabotayushchej na prirodnom urane i obychnoj vode; Investigaciones con un Conjunto Subcritico de Uranio Natural y Agua Ligera

    Energy Technology Data Exchange (ETDEWEB)

    Koskinen, H. [Institute of Technical Physics, Otaniemi (Finland)

    1964-02-15

    des coordonnees spatiales. Cette particularite contribue a simplifier la forme des equations du flux et bien souvent permet de ttouver une analogie avec les systemes critiques. Par une analyse approfondie des repartitions du flux dans un tel systeme, on peut obtenir des renseignements sur la validite de-modeles speciaux de ralentissement. On peut aussi obtenir quelques eclaircissements sur des problemes comme la fission rapide par interaction et la probabilite de fuite par resonance en fonction de l'espace. L'auteur estime que l'ensemble sous-critique, ralenti par un liquide, a cause de ses utilisations multiples et de sa securite, constitue presque la seule possiblite d'etude systematique de reseaux non uniformes. On se propose d'ajouter, a cet assemblage, des elements contenant du combustible enrichi. On pourra alors passer a l'etude systematique de reseaux mixtes. De plus, la recherche avec d'autres facteurs de non- uniformite sera plus facile parce que le flux sera plus haut. Le memoire donne quelques apercus sur le programme futur. (author) [Spanish] El autor informa sobre las investigaciones realizadas con un conjunto de uranio natural y agua ligera, y presenta algunos de los temas que constituiran el objeto de un programa futuro. La mayor parte de los datos son ineditos. Una parte reviste caracter provisional debido a que estan todavia en curso los trabajos experimentales y el analisis de los resultados. Los estudios se han concentrado en dos objetivos principales: 1. Estudio experimental de la validez de los metodos de calculos que se emplearan, particularmente en casos de geometrias especiales (distribuciones no uniformes del combustible, configuracion de subconjuntos, fronteras de forma especial, etc.). En estos casos, los estudios teoricos entranan con frecuencia ciertas dificultades de convergencia, por lo que es necesario comparar sus resultados con las distribuciones de flujo medidas. 2. Estudio de las propiedades especiales de los reticulados de uranio

  16. Energy Resources of Water-Bearing Geopressured Reservoirs-Tertiary Formations, Northwestern Gulf of Mexico (Summary Ressources énergétiques des réservoirs aquifères à pressions géostratégiques dans les formations tertiaires du golfe du Mexique (résumé

    Directory of Open Access Journals (Sweden)

    Bebout D. G.

    2006-11-01

    Full Text Available Estimates for the total gas resource in place in geopressured Tertiary sandstone reservoirs along the United States Gulf Coast range from 3,000 to 100,000 tcf 185 to 2,832 trillion cu m. This wide range in estimates was the incentive for initiative research effort in Texas and Louisiane to obtain more reliable data on all aspects of developing the available heat and hydraulic energy present in these aquifers in addition to the methane. All resource calculations are based on interpretations of total sandstone thickness, lateral extent of reservoirs, porosity and permeability, reservoir drive, salinity, temperature, pressure, and methane solubility. Diverse estimates arise from inadequate knowledge concerning these critical parameters. Regional and detailed local geologic studies have been conducted ta delineate prospective areas for testing the geopressured resource. A prospective area should have reservoir volume of 3 Cu mi (12 cu km, minimum permeability of 20 mD, and fluid temperatures of 300°F (150°C. A geothermal designed test well has been drilled in Brazoria County, Texas, in order to test the potential of producing up to 40,000 barrels of water per day from a geopressured reservoir. The reservoir consists of 250 to 300 ft (75 to 90 m of sandstone with core permeabilities between 40 and 60 mD and fluid temperatures from 300 to 350°F (159 to 177°C. The test period will continue for a 2-year period and, with other designed tests in Texas and Louisiana will provide invaluable data concerning high-volume production over long periods of time. Les estimations pour les ressources totales de gaz dans les réservoirs sableux tertiaires à pressions géostatiques le long de la Gulf Coast des Etats-Unis sont corises entre 3000 et 100 000 tcf, soit 85 à 2832. 10. 12 m3. Cette large incertitude a incité la mise en oeuvre d'un effort extensif de recherche au Texas et en Louisiane en vue d'obtenir des données plus sûres sur tous les aspects du d

  17. Influence de l'introduction de défauts colonnaires amorphes sur les propriétés de transport d'un monocristal supraconducteur à haute Tc

    Science.gov (United States)

    Warmont, Franck; Hébert, Sylvie; Hardy, Vincent; Martin, Christine; Simon, Charles; Provost, Jackie

    1997-12-01

    Columnar defects can be introduced in high T_c superconductors by irradiation with high energy heavy ions. The concentration of these artificial pinning centers with a well characterized morphology is easily controlled. The pinning efficiency of these defects has been often demonstrated, mainly from magnetization measurements. In the present work, measurements of the electrical resistance along the c axis, R_c(T), in the presence of columnar defects are presented. They show the ability of these defects to prevent the thermal fluctuations effects. The measurements have been performed on the same crystal before and after the heavy ion irradiation. L'irradiation aux ions lourds de haute énergie permet d'introduire des défauts colonnaires amorphes dans les supraconducteurs à haute T_c. Ces centres de pinning artificiel, de morphologie connue, sont introduits en concentration facile à maîtriser. L'efficacité de ces défauts a été très souvent démontrée à partir de mesures d'aimantation. L'étude présentée ici : mesure de la résistance selon l'axe c, R_c(T), en présence de défauts colonnaires parallèles à l'axe c, montre que ces défauts sont capables de s'opposer efficacement à l'effet des fluctuations thermiques. Les mesures ont été faites sur le même monocristal avant et après l'irradiation.

  18. Characterisation of the hydraulic properties within the EDZ around drifts at level -490 m of the Meuse/Haute-Marne URL: A methodology for consistent interpretation of hydraulic tests

    Science.gov (United States)

    Baechler, S.; Lavanchy, J. M.; Armand, G.; Cruchaudet, M.

    In order to investigate potential changes of the hydraulic properties of the EDZ over time in the Meuse/Haute-Marne underground research laboratory (URL), several hydraulic tests campaigns have been carried out between 2005 and 2008 in dedicated boreholes. After several test series, inconsistencies were noticed in the results, indicating, in particular cases, erratic, inexplicable property changes over time and spatial contrasts. It was therefore difficult to determine reliably potential trends of the EDZ hydraulic properties. It appeared necessary to re-evaluate both the interpretation concepts and assumptions applied to the numerical analyses of test data on the EDZ, trying to better constrain the flow model and the parameter variables. In order to improve the understanding of the geometrical, geomechanical and hydraulic properties of the EDZ, independent information from other investigation methods has been used to critically revise the conceptual model and formation parameters. In particular, results from a diffusion experiment and ultrasonic measurements allowed constraining the extent of the mechanical damaged zone around the borehole (BDZ). Storativity parameters were fitted due to their expected variability. Indeed, high storativity values can be presumed under the unsaturated conditions of the EDZ. The results of the reanalyses, performed with the numerical borehole simulator MULTISIM, demonstrated the good quality and consistency of the revised conceptual model with constrained BDZ and variable storativity. Overall the new simulation results obtained from selected test series are now very consistent. The revised conceptual model demonstrated its capacity to better represent the evolution and extension of the EDZ around a drift in Meuse/Haute-Marne URL. Further consistency checks are proposed to confirm the new model assumptions and the estimates of the single phase flow model in the EDZ.

  19. Characterisation of the hydraulic properties within the EDZ around drifts at level -490 m of the Meuse/Haute-Marne URL: A methodology for consistent interpretation of hydraulic tests

    International Nuclear Information System (INIS)

    Baechler, S.; Lavanchy, J. M.; Armand, G.; Cruchaudet, M.

    2011-01-01

    In order to investigate potential changes of the hydraulic properties of the EDZ over time in the Meuse/Haute-Marne underground research laboratory (URL), several hydraulic tests campaigns have been carried out between 2005 and 2008 in dedicated boreholes. After several test series, inconsistencies were noticed in the results, indicating, in particular cases, erratic, inexplicable property changes over time and spatial contrasts. It was therefore difficult to determine reliably potential trends of the EDZ hydraulic properties. It appeared necessary to re-evaluate both the interpretation concepts and assumptions applied to the numerical analyses of test data on the EDZ, trying to better constrain the flow model and the parameter variables. In order to improve the understanding of the geometrical, geomechanical and hydraulic properties of the EDZ, independent information from other investigation methods has been used to critically revise the conceptual model and formation parameters. In particular, results from a diffusion experiment and ultrasonic measurements allowed constraining the extent of the mechanical damaged zone around the borehole (BDZ). Storativity parameters were fitted due to their expected variability. Indeed, high storativity values can be presumed under the unsaturated conditions of the EDZ. The results of the reanalyses, performed with the numerical borehole simulator MULTISIM, demonstrated the good quality and consistency of the revised conceptual model with constrained BDZ and variable storativity. Overall the new simulation results obtained from selected test series are now very consistent. The revised conceptual model demonstrated its capacity to better represent the evolution and extension of the EDZ around a drift in Meuse/Haute-Marne URL. Further consistency checks are proposed to confirm the new model assumptions and the estimates of the single phase flow model in the EDZ. (authors)

  20. Quantification de la Charge Virale et tests de résistance du VIH-1 aux ARV à partir d’échantillons DBS (Dried Blood Spots chez des patients Guinéens sous traitement antirétroviral

    Directory of Open Access Journals (Sweden)

    Nestor Bangoura

    2015-06-01

    Full Text Available Problématique: Comme dans plusieurs pays du Sud, le suivi virologique des patients sous traitement antirétroviral (TARV en Guinée est timide voire inexistant dans certaines localités. Le but de cette étude était d’évaluer la faisabilité technique et logistique de l’utilisation des DBS dans les tests de charge virale (CV et de génotypage. Méthode: De septembre à octobre 2010, les DBS ont été préparés à partir de prélèvements sanguins de patients adultes sous TARV. Le délai d’envoi des échantillons au laboratoire de référence était de 30 jours maximum après le prélèvement et se faisait à température ambiante. La CV a été quantifiée et les échantillons de patients en échec virologique (CV ≥ 3 log10 copies/mL ont été génotypés selon le protocole de l’ANRS. L’algorithme de Stanford version 6.0.8 a été utilisé pour l’analyse et l’interprétation des mutations de résistance. Résultats: Parmi les 136 patients inclus, 129 et 7 étaient respectivement sous première et deuxième ligne de traitement avec une médiane de suivi de 35 mois [IQR: 6-108]. L’échec virologique a été noté chez 33 patients. Parmi eux, 84.8% (n = 28/33 ont bénéficié d’ungénotypage. Le taux de résistance global était de 14% (n = 19/136. Le CRF02_AG était le sous type viral le plus prévalent (82%; n = 23. Conclusion: En plus de montrer la faisabilité technique et logistique des tests de CV et de génotypage à partir des DBS, ces résultats montrent l’intérêt de leurs utilisations dans le suivi virologique des patients sous TARV. Cette étude a permis également de documenter l’échec virologique, la résistance aux ARV et la diversité génétique du VIH-1 en Guinée. Mots clés: VIH-1, Résistance aux ARV, DBS (Dried Blood Spots, Guinée Conakry, Génotypage,Charge Virale.   Quantification of Viral load and resistance tests of HIV-1 to ARVs from dried blood spotssamples in Guinean patients undergoing

  1. Impregnation of Graphite with Liquid Silicon in a Vacuum; Impregnation du graphite avec du silicium llquide sous vide; Propitka grafita kremniem v vakuume; Impregnacion de grafito con silicio liquido en el vacio

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov, V. E.; Zelenskij, V. F.; Kolendovskij, M. K.; Kolomiets, L. D.

    1963-11-15

    A study was made of the possibility of producing high thermal resistance graphite-silicon carbide materials by means of impregnating MG graphite with liquid silicon in a vacuum. An attempt is made to explain the mechanism and origins of the degradation of products during the impregnation process. On the basis of their researches the authors put forward a number of technical requirements, observance of which make it possible to produce graphite-silicon carbide materials by means of impregnation of graphite with liquid silicon-in a vacuum at temperatures of 1450 to 1600 deg. C. (author) [French] Les auteurs etudient la possibilite d'obtenir, en impregnant du graphite MG avec du silicium liquide sous vide, des materiaux au graphite, carbure et silicium resistants a la chaleur. Ils cherchent a expliquer le mecanisme et les causes de la destruction des produits au cours de l'impregnation. Se fondant sur les resultats de leurs recherches, ils enoncent un certain nombre de conditions technologiques a remplir pour obtenir les materiaux en question en impregnant le graphite de silicium liquide sous vide, a une temperature de l'ordre de 1450 a 1600 deg. C. (author) [Spanish] Los autores han estudiado la posibilidad de preparar materiales de grafito y carburo de silicio de elevada resistencia termica impregnando grafito marca MG con silicio liquido en el vacio. Proponen una explicacion del mecanismo y de las causas de la degradacion de los productos durante la impregnacion. Sobre la base de las investigaciones realizadas, los autores enumeran una serie de condiciones tecnologicas cuyo cumplimiento permite preparar piezas de grafito y carburo de silicio, impregnando el grafito con silicio liquido en el vacio a temperaturas comprendidas entre 1450 y 1600 deg. C. [Russian] V rabote izuchalas' vozmozhnost' sozdaniya grafit-karbidkremnievykh materialov s povyshennoj termostojkost'yu putem propitki grafita marki MG zhidkim kremniem v vakuume. Sdelana popytka ob{sup y

  2. Gas injection test in a borehole of the Meuse/Haute Marne underground research laboratory: experimental overview and basic data analysis

    International Nuclear Information System (INIS)

    La Vaissiere, Remi de; Talandier, Jean; Piedevache, Mederic; Helmlinger, Benjamin; Lavanchy, Jean-Marc; Croise, Jean; Senger, Rainer

    2012-01-01

    Document available in extended abstract form only. Understanding of the fate and of the impact of gas produced by corrosion of metals, microbial degradation and the radiolysis of water within a deep geological disposal repository for radioactive waste, is of major relevance in the performance assessment including the long-term evolution of the repository. To address these issues, the French national Agency for the management of radioactive waste (Andra) has directed a field scale experiment examining the mechanisms controlling gas entry and gas migration in the Callovo-Oxfordian (COX) clay, the proposed host rock of the French deep geological repository project. This experiment, called PGZ1, studies the migration of nitrogen in the COX based on gas injection tests performed in a borehole of the Meuse/Haute Marne URL. This experiment is currently being performed under the auspices of the Euratom 7. Framework FORGE project. In this poster, we provide an overview on the field data and a basic analysis of the data. The advanced interpretation of the data was based on numerical modeling of the two-phase flow with 3 different approaches and numerical codes. The experimental layout consists of three boreholes. Two parallel boreholes (PGZ1201 and PGZ1202) were drilled from the GED drift and are equipped with a triple interval system to monitor the pressure evolutions in 3 intervals, associated with the hydraulic and gas injection tests in the selected test interval (PGZ1201, middle interval). The third borehole (PGZ1031) was drilled from the GEX drift and is equipped with an extensometer probe, to monitor potential deformation associated with the resulting stress changes. An initial hydraulic test (HYDRO1) was performed in the test interval to estimate the hydraulic conductivity of the COX prior to gas testing. The hydraulic test consisted in a sequence of injections of synthetic formation water (pressure pulse followed by a constant pressure and a final shut-in phase

  3. Earth tidal and barometric responses observed in the Callovo-Oxfordian formation at ANDRA Meuse/Haute-Marne underground research laboratory

    International Nuclear Information System (INIS)

    Delcourt-Honorez, M.; Scholz, E.

    2012-01-01

    Document available in extended abstract form only. Fluid pressure or hydraulic head measured in wells in geological formations can respond to Earth tidal forces and atmospheric pressure variations. At Andra Meuse/Haute-Marne underground research laboratory located in Bure (France), water level and fluid pressure are measured in several boreholes in the Callovo-Oxfordian clay formation (COX) and in overlying geological formations. One of these boreholes (EST207) is equipped with a multi-packer system monitoring 11 intervals, including 8 in the COX. The recorded fluid pressures in EST207 were analyzed to determine possible Earth tidal responses. In this borehole, the fluid pressure and atmospheric pressure variations data are recorded every fifteen minutes and 6.5 years of such data from 2004/06/02 to 2010/12/31 were analyzed. Various perturbed data, gaps, drift and abnormal data were corrected through a data preprocessing process. Data interpolation and filtering processes were performed to have data available every 15 minutes at 0, 15, 30 and 45 minutes on the hour. A spectral analysis (Fast Fourier Transform) of each pressure data series shows amplitude peaks at frequencies corresponding to various Earth tidal frequencies: diurnal and semi diurnal waves can be identified. Spectral analyses were also performed on the atmospheric pressure data. The solar semi diurnal wave (S2) was identified. The 'Earth Tides ETERNA package' was used to separate the waves according to the frequencies bands. The analyses performed using ETERNA are indicated as 'Earth Tidal Analyses' (ETAN). Tidal parameters are estimated from ETAN: amplitudes A and its standard deviation σ(A)[hPa], phase φ for the main waves in diurnal and semi diurnal frequencies bands before and after atmospheric pressure variations correction. The barometric efficiency (BE) and its standard deviation σ (BE) as regression coefficient is calculated. The atmospheric pressure data are also analyzed with ETERNA; the

  4. Study of some ion exchange minerals which can be used in water at high temperature; Etude de quelques echangeurs mineraux utilisables dans l'eau a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Hure, J.; Platzer, R.; Bittel, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Fourre, J. [Societe le Carbone Lorraine, 75 - Paris (France); Wey, R. [Faculte des Sciences de Strasbourg, Lab. de Mineralogie, 67 (France)

    1958-07-01

    these impurities (that is to say capable of de-mineralizing polluted water). This paper describes the preliminary results of the investigation. (author) [French] L'etude de l'utilisation des echangeurs d'ions a haute temperature a ete essentiellement faite en vue de l'epuration de l'eau des reacteurs. On connait l'interet qu'il y a a garder dans un circuit de reacteur de l'eau de tres haute resistivite (plusieurs centaines a quelques millions {omega}.cm): abaissement de la corrosion, abaissement du taux de radiolyse, abaissement de la radioactivite des circuits et canalisations, les elements autres que les constituants de l'eau transportes par celle-ci devenant generalement radioactifs par leur passage au coeur du reacteur. Si la circulation d'eau se fait a des temperatures inferieures a 45 deg. C, les resines echangeuses d'ions organiques utilisees en lit melange resolvent tres bien le probleme de l'epuration en continu. Par contre, pour des temperatures plus elevees surtout au-dessus de 100 deg. C, leur utilisation n'est pas possible, la degradation de ces hauts polymeres etant tres rapide. De meme, l'action des rayonnements, par exemple ceux des produits fixes par les echangeurs d'ions, detruit irremediablement les chaines organiques constituant le squelette de ces echangeurs. Nous avons donc cherche d'es composes pouvant assurer une bonne deionisation de l'eau, mais de structures telles qu'elles ne soient pas deteriorees par l'action de la temperature et des rayonnements. Nous nous sommes particulierement orientes dans trois voies: - echangeurs d'ions naturels a structure minerale (argile du type montmorillonite), - composes mineraux naturels traites pour leur conferer les proprietes d'echangeurs d'ions (charbons actives), - composes mineraux synthetiques (sels tres peu solubles, phosphate et hydroxyde de zirconium et de thorium). Dans ces etudes, nous nous

  5. [Project for] a high-flux extracted neutron beam reactor [for physicists]; Un [projet de] reacteur a haut flux et faisceaux sortis [pour physiciens

    Energy Technology Data Exchange (ETDEWEB)

    Ageron, P [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-07-01

    tubes and the experimental equipment which can support doses much higher than the ones which are biologically permissible. The final part of the communication describes the studies carried out on the realization of a liquid hydrogen cold sink, one of the most important experimental devices envisaged. (authors) [French] Les besoins francais en canaux pour sortie de neutrons de differentes energies sont brievement indiques. L'interet bien connu des neutrons froids (plus de 4 Angstroem) est souligne. Les grandes lignes d'un reacteur permettant de satisfaire les physiciens sont esquissees. Ce sont les suivantes: 1 - Flux dans l'eau lourde du reflecteur de l'ordre de 7. 10{sup 14} thermiques. 2 - Souplesse d'emploi maximum obtenue par: - separation physique du coeur et du reflecteur, - independance des experiences entre elles, - possibilite de modification, sans interruption notable du fonctionnement de la pile, des experiences physiques jusqu'a - et y compris - la nature du reflecteur utilise, - reduction au minimum des protections fixes; emploi largement generalise des protections liquides (eau) et fluidisees (sables). 3 - Continuite technologique aussi grande que possible avec les reacteurs de recherche francais existant ou en construction (SILOE, PEGASE, OSIRIS). 4 - Surete de fonctionnement recherche par la simplicite de conception. 5 - Minimisation des frais de construction. La reduction des frais d'exploitation est recherchee plutot indirectement par la simplicite des solutions et la reduction du personnel d'exploitation, que directement par la minimisation des consommations d'elements combustibles et d'energie. La solution preconisee peut etre decrite comme un reacteur de type piscine a coeur clos, non pressurise, tres sous modere par l'eau legere de refroidissement. Entourant le reacteur, se trouvent un certain nombre de 'canaux boucles' comprenant chacun: - une portion du reflecteur (eau lourde dans l'exemple decrit), - une portion de canal d'extraction de neutrons

  6. A fly-wheel drive with controlled-torque clutch for a reactors cooling circuit pumps; Entrainement des pompes du circuit de refrigeration d'un reacteur par volant a embrayage sous couple controle

    Energy Technology Data Exchange (ETDEWEB)

    Riettini, A [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-10-15

    After a theoretical study on the slowing down of a centrifugal pump, the motion equations have been checked by means of experimental tests. In order to have important slowing down times (which is the case of the cooling pumps of a research reactor) it is necessary to add a fly-wheel. To prevent troubles when starting, a block pump-fly-wheel with clutch under controlled torque was developed. It is so possible to start the fly-wheel progressively without increasing too much power of the driving motor. (author) [French] Apres une etude theorique sur le mouvement de ralentissement d'une pompe centrifuge, les equations du mouvement ont ete verifiees par des essais pratiques. Pour obtenir des temps de ralentissement importants (cas des pompes de refrigeration d'un reacteur de recherche) il est necessaire d'y adjoindre un volant d'inertie. Pour eviter les inconvenients au demarrage, on a etudie un ensemble pompe-volant avec embrayage sous couple controle. Cette solution permet de lancer progressivement le volant sans augmentation appreciable de la puissance du moteur d'entrainement. (auteur)

  7. Development of the high temperature ion-source for the Grenoble electromagnetic isotope separator; Etude et realisation de la source d'ions a haute temperature du separateur electromagnetique d'isotopes de Grenoble

    Energy Technology Data Exchange (ETDEWEB)

    Bouriant, M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-12-01

    The production of high purity stable or radioactive isotopes ({>=} 99.99 per cent) using electromagnetic separation require for equipment having a high resolving power. Besides, and in order to collect rare or short half-life isotopes, the efficiency of the ion-source must be high ({eta} > 5 to 10 per cent). With this in view, the source built operates at high temperatures (2500-3000 C) and makes use of ionisation by electronic bombardment or of thermo-ionisation. A summary is given in the first part of this work on the essential characteristics of the isotope separator ion Sources; a diagram of the principle of the source built is then given together with its characteristics. In the second part are given the values of the resolving power and of the efficiency of the Grenoble isotope separator fitted with such a source. The resolving power measured at 10 per cent of the peak height is of the order of 200. At the first magnetic stage the efficiency is between 1 and 26 per cent for a range of elements evaporating between 200 and 3000 C. Thus equipped, the separator has for example given, at the first stage, 10 mg of {sup 180}Hf at (99.69 {+-} 0.1) per cent corresponding to an enrichment coefficient of 580; recently 2 mg of {sup 150}Nd at (99.996 {+-} 0.002) per cent corresponding to an enrichment coefficient of 4.2 x 10{sup 5} has been obtained at the second stage. (author) [French] La production d'isotopes stables ou radioactifs de haute purete isotopique ({>=} 99.99 pour cent), par separation electromagnetique, exige des appareils de haut pouvoir de resolution. En outre, et en vue de collecter des isotopes de tres faible abondance ou de periode tres courte, le rendement des sources d'ions doit etre eleve ({eta} > 5 a 10 pour cent). Dans ce but, la source realisee fonctionne a haute temperature (2500-3000 C) et utilise l'ionisation par bombardement electronique, ou la thermoionisation. Dans la premiere partie de ce travail, on resume d'abord les caracteristiques

  8. Geoscientific Data Acquisition and Management System (systeme d'Acquisition et de Gestion des Donnees, S.A.G.D.) of the Andra Meuse / Haute-Marne research center

    International Nuclear Information System (INIS)

    Tabani, P.; Hermand, G.; Delay, J.; Mangeot, A.

    2010-01-01

    Document available in extended abstract form only. ANDRA is directly responsible for all scientific data acquired in real time and wire-line at the Meuse Haute- Marne underground research laboratory. To fulfil the needs for the acquisition, storage and display of realtime data, Andra decided to develop and install a system called SAGD (Systeme d'Acquisition et de Gestion des Donnees). With this view, a system was designed to: - Determine the acquisition tools and methods so that technical failures would not result in the loss of data or the acquisition of erroneous data, - Store (conservation) in the long-term all data in a single place in a single form, - Allow the diffusion and free access of data to the large community of ANDRA researchers, partners and service contractors in a single fluid way whatever the source of the data. - Help external communication through a user friendly and easy to understand presentation of the recorded data. S.A.G.D fulfils these objectives by: - Making available in real time, and through a single system, all experimental data under acquisition at the MHM Center and Mont Terri laboratory, - Displaying the recorded data on temporal windows and specific time step, - Allowing remote control of the experimentations, - Ensuring the traceability of all recorded information, - Ensuring data storage in a data base. S.A.G.D has been deployed in the first experimental drift at -445 m in November 2004. It was subsequently extended to the underground Mont Terri laboratory in Switzerland in 2005 and to the entire surface logging network of the Meuse / Haute-Marne Center in 2008. The SAGD computer network is an autonomous network consisting of optical fiber links which transmits experimentation data to the servers and computers in the control room, whether they originate from the bottom of a borehole or surface level. A high speed link between Mont Terri and Bure allows remote control of all the experimentations and the centralization of all

  9. Convective Heat Transfer in a Pneumatic Hybrid Engine Échange de chaleur convectif dans un moteur hybride pneumatique

    Directory of Open Access Journals (Sweden)

    Brejaud P.

    2011-09-01

    étude montre que, à cause de l’extinction du mouvement de tumble à l’approche du point mort haut, la forme originale du modèle de Woschni n’est pas adaptée, pour un moteur opérant en mode pneumatique entraîné, à décrire la forme mesurée des échanges de chaleurs instantanés en fonction de l’angle vilebrequin. Les auteurs proposent une modification du modèle de Woschni décrivant plus fidèlement les échanges de chaleurs instantanés lors des courses de compression et de détente, applicable pour les modes pneumatique et entraîné avec coupure d’injection. En premier lieu, le nouveau modèle à paramètres constants est identifié à partir de mesures expérimentales effectuées en mode entraîné sous diverses conditions opératoires. Le mode suralimentation pneumatique sans combustion (allumage non déclenché est alors étudié, en utilisant des valeurs de paramètres identiques à celles utilisées en mode entraîné. Cette étude montre que le modèle modifié reste pleinement applicable au mode suralimenté, et ceci malgré une certaine modification de la structure aérodynamique interne du cylindre créée par l’ouverture de la soupape de charge sous un haut rapport de pression.

  10. En eaux troubles : accentuation des pressions climatiques et ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    informatique font partie des nombreuses grandes sociétés qui se sont installées dans cette ville tentaculaire. Or, les 10 millions d'habitants de Bengaluru, la multitude d'industries concurrentes, de même que les exploitations ...

  11. Diagnostica di processi molecolari in scariche a pressione atmosferica

    OpenAIRE

    Scarduelli, Giorgina

    2009-01-01

    This work reports on the study of the products obtained by the plasma treatment of methane mixtures or benzene mixtures in a coaxial cylindrical dielectric barrier discharge reactor at atmospheric pressure. The plasma products have been analyzed by spectroscopic and mass spectrometric techniques (GC-MS, FT-IR, NMR, MALDI-TOF MS). Moreover, in this work we report the plasma phase characterization in a parallel plate DBD reactor by using OES and LIF tecniques.

  12. The Biological Effect of Fast Neutrons and High-Energy Protons; Effets Biologiques des Neutrons Rapides et des Protons de Haute Energie; Biologicheskoe dejstvie bystrykh nejtronov i protonov vysokikh ehnergii; Efectos Biologicos de los Neutrones Rapidos y de los Protones de Elevada Energia

    Energy Technology Data Exchange (ETDEWEB)

    Moskalev, Ju. I.; Petrovich, I. K.; Strel' cova, V. N.

    1964-03-15

    tumour of the thyroid gland also appear. With proton irradiation, the minimum tumour dose for haemopoietic tissue and the thyroid gland is in the neighbourhood of 250 rad, for the testicles 300 rad, for the prostate, the pancreas and the subcutaneous tissue 100 rad. After irradiation with fast neutrons the incidence of tumours of the testicles, the large intestine, the kidneys and the liver is increased at doses between 42.5 and 85 rad. The same is true for tumours of the skin and the subcutaneous tissue at a dose of 85 rad. With fast neutron irradiation tumours appeared at approximately three to five times lower radiation doses than with proton irradiation. (author) [French] Le memoire expose les resultats d'experiences visant a comparer l'e ffe t des neutrons rapides et celui des protons de haute energie (500 MeV) sur la duree de vie, le sang peripherique, la frequence et la rapidite d'apparition des tumeurs chez le rat, en tenant compte de la dose efficace et du delai d'observation. Les travaux ont porte sur 573 rats blancs pour les neutrons et sur 490 rats blancs pour les protons. Les animaux etaient exposes a des doses de neutrons rapides de 8,5 a 510 rad et a des doses de protons de 28 a 1008 rad. Pour les neutrons rapides et les protons, les auteurs ont determine les valeurs des doses effectives aiguees, sub-aiguees et chroniques. La DL{sup 30}{sub 50} est de 408 rad pour les neutrons et de 600 rad pour les protons; la DL{sup 120}{sub 50} s'eleve a 380 et 600 rad, respectivement. On a procede a une etude critique des lois qui regissent la mortalite des rats a breve echeance et apres des delais prolonges. D'apres les constatations, la survie moyenne des rats irradies par des neutrons rapides est independante de leur sexe. En ce qui concerne les differents indices du sang peripherique, la forme de la courbe dose/effet depend dans une forte mesure, non seulement de la radiosensibilite des cellules correspondantes du sang, mais aussi de la duree d'observation. Elle

  13. Problems presented by the filtration and sampling of aerosols in the atomic energy programme; Problemes poses par la filtration et le prelevement des aerosols dans le cadre de l'energie atomique

    Energy Technology Data Exchange (ETDEWEB)

    Cochinal, R [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    The maximum permissible limits for radioactive aerosols are much lower than those for aerosols encountered in the non-nuclear industries. These limits depend on numerous factors such as: nature of the radiation, half-life, etc. The radioactive aerosols can be prepared by various methods. The filtering of the air in high activity laboratories or in plutonium treatment factories necessitates an installation consisting of: - aspiration filters, - extraction filters of very high efficiency (those used for {alpha} emitter cells: designed to be replaced without incurring contamination risks; those used for {gamma} emitter cells: designed to be replaced by remote control). The filtering in nuclear reactors is also effectuated by filter papers: - the G1 reactor with open circuit: the air coolant is entirely filtered at the entry and on leaving; - the G2, G3 and EDF1 reactors with closed circuits: filtering under pressure of a small portion of the coolant gas. (author) [French] Les limites maxima permises des aerosols radioactifs sont beaucoup plus faibles que celles des aerosols rencontres dans l'industrie classique. Elles dependent de nombreux facteurs tel que: nature du rayonnement, periode radioactive, etc... La formation des aerosols radioactifs est de nature diverse. La filtration des laboratoires de haute activite, ou d'usines d'elaboration de plutonium conduit a des types d'installations comportant: - des filtres d'aspiration; - des filtres d'extraction a rendement extremement eleve (type pour cellules emettrices {alpha} concu pour etre change sans risque de contamination, type pour cellules emettrices {gamma}: concu pour etre change a distance) La filtration des reacteurs nucleaires sont egalement effectuee par des papiers filtres: - reacteur G1 a circuit ouvert: air de refroidissement totalement filtre a l'aspiration et a l'extraction; - reacteurs G2, G3, EDF1: a circuit ferme: filtration sous pression d'une faible partie du gaz de refroidissement. (auteur)

  14. Séparation par membranes organiques : applications et prévisions de marché dans l'industrie pétrolière et pétrochimique Separation by Organic Membranes: Applications and Market Outlook in the Petroleum and Petrochemical Industry

    Directory of Open Access Journals (Sweden)

    Arlie J. P.

    2006-11-01

    Full Text Available Les principales applications des membranes en séparation portent aujourd'hui sur la perméation gazeuse : récupération de l'hydrogène sous haute pression en raffinage (hydrocraquage, en pétrochimie (synthèse de l'ammoniac, enrichissement du gaz de synthèse; traitement du gaz naturel (élimination des gaz acides, récupération du CO2 pour récupération assistée, extraction de l'hélium. En matière de purification de l'eau de mer, la technique d'osmose inverse est limitée à des capacités de 10 000 m3/j pour des raisons d'économie d'échelle. Le marché des membranes est en forte croissance, 10 % et plus en moyenne annuelle, essentiellement pour les applications déjà implantées industriellement, qui déplacent ou complètent par association les technologies classiques de séparation. The principal applications of separation membranes now have to do with gaseous permeation such as high-pressure hydrogen recovery in refining (hydrocracking and in petrochemistry (ammonia synthesis, enrichment of synthetic gas; the processing of natural gas (sour-gas removal, CO2 recovery for enhanced recovery, helium extraction. For seawater purification, the technique of reverse osmosis is limited to capacities of 10 000 m3/d for reasons of economy of scale. The market for membranes is increasing strongly, at a rate of 10% and more for the yearly average, mainly for applications that are already industrially installated and that are moved or completed by the adding on of conventional separation technologies.

  15. Distribution spatio-saisonnière des cyanobactéries le long du cours d'eau, la Lobo, haut Sassandra (Daloa, Côte d'Ivoire

    Directory of Open Access Journals (Sweden)

    Groga, N.

    2017-01-01

    Full Text Available Spatio-seasonal Distribution of the Cyanobacteria along the river stream, Lobo Haut Sassandra (Daloa, Ivory Coast. Cyanobacteria populations were studied through in situ records along the Lobo River, source of drinking water supply for the 261,789 inhabitants of the city of Daloa in Ivory Coast. .This environment is characterized by a an average depth of 5 m and an average temperature of 30ºC. This river is mostly influenced by human activities that favour the growth of aquatic plants by enrichment in nutrients. The nitrate concentration varied between 0 and 1.54 mg.l -1(NO3- and phosphate concentration ranged from 0.001 to 0.71 mg.l-1 (PO43-. The analyzes of biological parameters carried out in six stations between September 2013 and June 2014 identified 13 taxa of cyanobacteria with a dominance of Oscillatoria sp. (OSSP and Pseudanabaena sp. (PSSP genera each representing 11%. Very little difference was observed between the cyanobacterial populations of each station. They proliferated more in the dry season than in the rainy season. The species Aphanocapsa sp. (APSP presented a maximal density of 24.10³ cells. ml-1 on St5 station in dry season whereas in the rainy season it was only 5.10³ cells .ml-1 at the same location.

  16. Exemple d'imagerie de puits par diagraphie acoustique et sismique haute résolution An Example of Acoustics and Very High Resolution Seismic in a Highly Deviated Well

    Directory of Open Access Journals (Sweden)

    Mari J. L.

    2006-11-01

    Full Text Available La diagraphie acoustique est classiquement utilisée pour fournir la lenteur des formations. Les enregistrements en champ total obtenus dans des puits fortement déviés ou horizontaux peuvent être traités pour fournir des sections de microsismique de puits qui ont une investigation latérale d'une dizaine de mètres par rapport au drain. Cet article présente les résultats d'expérimentations réalisées dans une carrière calcaire située en Bourgogne (France. Un puits fortement dévié (10 degrés a été foré dans l'unité géologique oolithe blanche qui a une épaisseur de 80 m environ. Des diagraphies acoustiques et de la sismique haute résolution ont été enregistrées dans le puits dévié. En diagraphie acoustique, deux jeux de données ont été enregistrés : une section à déport constant et un point de tir commun à très grand nombre de traces et à distance entre traces centimétrique. Le traitement des données met en évidence des réflexions internes a l'oolithe blanche situées à quelques mètres par rapport au drain. La diagraphie acoustique ne permet pas d'éclairer le toit et le mur de l'unité oolithe blanche. Cet objectif est partiellement atteint par une sismique très haute résolution de puits. Ce type de sismique travaille dans une bande de fréquences intermédiaire entre la sismique de puits classique et la diagraphie acoustique. Elle nécessite le développement d'outils particuliers, notamment au niveau des sources de puits. Une collection point de tir commun de données de sismique très haute résolution obtenues avec une source prototype de type impulsionnel montre des réflexions correspondant à des réflecteurs situés à plusieurs dizaines de mètres (~40 m par rapport au drain. Les résultats des expérimentations montrent le potentiel de la diagraphie acoustique et de la sismique haute résolution de puits à décrire une unité réservoir à différentes échelles. Acoustic logging is

  17. Les Basaltes de l’Atlas de Béni-Mellal (Haut Atlas Central, Maroc : un Volcanisme Transitionnel Intraplaque Associé aux Stades de L’évolution Géodynamique du Domaine Atlasique

    Directory of Open Access Journals (Sweden)

    Jaouad Guezal

    2013-07-01

    Full Text Available Les roches basaltiques de l’Atlas de Béni-Mellal (Haut-Atlas Central, Maroc, mises en place, dans les différents bassins synclinaux de la région, se manifestent en deux horizons volcaniques B1 et B2. Les deux événements éruptifs sont d’âge Jurassique moyen pour les coulées de l’horizon B1 et d’âge Crétacé inférieur pour celles de l’horizon B2. Les roches sont caractérisées par un faciès des basaltes à olivines. La composition de leurs clinopyroxènes est marquée par deux tendances : augite au niveau des basaltes à olivine du B1 et diopside au niveau de ceux du B2. La composition géochimique sur roche totale dévoile le caractère transitionnel de ces roches. La relative dissimilitude géochimique signalée au niveau des basaltes des deux horizons peut être expliquée par un début du changement de la nature du magmatisme de la région en relation avec l’évolution géodynamique du domaine atlasique.

  18. Étude de la réponse en courant de détecteurs silicium opérés en environnement de très hautes radiations

    CERN Document Server

    Roy, Patrick

    Ce travail se situe dans le cadre de l'expérience ATLAS auprès du Grand Collisionneur Hadronique (LHC) qui sera construit au CERN. Il consiste en l'étude de la réponse en courant de détecteurs au silicium de grande surface, irradiés par des neutrons ou des protons de façon à reproduire l'environnement de hautes radiations auquel le détecteur ATLAS devra faire face. A l'aide d'une modélisation du transport des charges produites par le passage de particules alpha ou bêta dans un détecteur au silicium et d'un ensemble de données expérimentales, il est possible d'obtenir certaines caractéristiques électriques importantes des détecteurs. Ces caractéristiques sont: la concentration effective de dopants (ce qui détermine la tension de désertion d'un semi-conducteur), le piégeage des porteurs de charge (donnant l'efficacité de la collection des charges), et les mobilités des électrons et des trous (influençant le temps nécessaire à la collection des charges). En connaissant l'évolution de...

  19. Développement de services de monitoring et de haute disponibilité pour le système de contrôle de l'expérience LHCb

    CERN Document Server

    Lepinette, M; Mesnard, E; Neufeld, N

    2009-01-01

    L'expérience LHCb, menée dans le cadre du CERN, dispose d'un réseau standard pour acquérir les données produites par les collisions du LHC. Les différents serveurs qui font partie de ce réseau, supportent de nombreux services. En l'état, une panne physique peut rendre un service complètement indisponible, et peut-être interrompre l'acquisition de données. C'est pour cela qu'il faut que le système d'acquisition de données et le système de commande soient les plus fiables possibles. Pour résoudre ce problème, il existe une solution: la haute disponibilité, basée sur une redondance de matériel et la mise en place de cluster. Cette solution peut être amélioré par l'utilisation conjointe de mécanismes de virtualisations. Ma tâche a été d'étudier et de comparer différents types d'outil de virtualisation et de les implémenter sur un cluster.

  20. Electron bombardment fusion and continuous casting of uranium carbide. Fundamental study of the metallurgical and thermal processes; Fusion sous bombardement d'electrons et coulee continue de carbure d'uranium. Etude fondamentale des processus metallurgiques et thermiques

    Energy Technology Data Exchange (ETDEWEB)

    Trouve, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-02-01

    During a pilot production run, about 1.200 kg of uranium carbide cylindrical rods were prepared by electron bombardment fusion and continuous casting in an apparatus making it possible to operate in a constant vacuum automatically. In order to make the most of the fusion technique used, it was necessary to resolve a certain number of problems involved in this production. It was found that the energy yield for the electron bombardment heating using accelerating voltages of about 10 kV was 100 per cent; about 40 per cent of the electrons are re-emitted by back-scattering. These electrons leave the surface with practically zero energy. The fusion technique leads to the elimination of the majority of the metallic impurities. In order to explain the variations in the non-metallic impurity contents the different reactions occurring in the molten uranium monocarbide have been determined. A micrographic study of the rods obtained has shown various types of crystallization depending on the rate of casting and, despite the uniaxial symmetry of the cooling, no texture has been observed, whatever the rate of fusion employed. The aspects of the fracture surfaces observed on certain rods can be explained by theory in the domain where the material is elastic. Furthermore it has been shown that a decrease in the brittleness occurs as a result of the formation of fine precipitates of the Wiedmanstatten structure type. (authors) [French] Au cours d'une fabrication pilote, environ 1 200 kg de barreaux cylindriques de carbure d'uranium ont ete prepares par fusion sous bombardement d'electrons et coulee continue dans un appareillage permettant d'operer d'une maniere automatique sous vide constant. Afin de tirer le meilleur parti possible de la technique de fusion utilisee, il importait de repondre a un certain nombre de questions soulevees par cette fabrication. Le rendement energetique du chauffage par bombardement d'electrons pour des tensions acceleratrices de l'ordre de 10 kV a ete

  1. Les littératures contemporaines sous l´angle du concept de nation = As literaturas contemporâneas sob o aspecto do conceito de nação

    Directory of Open Access Journals (Sweden)

    Dominique Marie Philippe Geneviève Boxus

    2009-01-01

    Full Text Available Devant l´actuelle déstabilisation du concept de nation en contexte demondialisation, quelles sont la pertinence et l´actualité d´une étude des littératures contemporaines sous l´angle de la nation ? Faut-il constater l´obsolescence du concept de littérature nationale ? Pour sortir d´une impasse théorique, la perspective historique s´avèreindispensable et une étude des avatars de la nation, concept et réalité, met sur la voie d´une vision élargie où la nation est révélée comme représentation: fiction symbolique ou mythe.À côté d´un modèle mythique hégémonique privilégiant l´homogène, un autre modèle national est identifié, caractérisé par l´hétérogène et servant d´auxiliaire aux collectivités excentriques en quête d´une identification. Comme expression privilégiée du mythe de lanation, la littérature joue un rôle fondamental dans l´invention de représentations nationales inédites, ce qui justifie la pérennité d´une recherche (sociologique et/ou thématique centrée sur le littéraire contemporain (ou passé, pourvu qu´elle opère à partird´un point de vue actualisé envisagé sous l´angle de la nation.Diante da atual desestabilização do conceito de nação em contexto de globalização, quais são a pertinência e a atualidade de um estudo das literaturas contemporâneas sob o ângulo da nação? Haverá de se constatar a obsolescência do conceito de literatura nacional? Para sair de um impasse teórico, apresenta-se uma história do conceito de nação, desde suas origens no século XVIII até os dias de hoje. Abre-se caminho para uma visão ampliada da nação, ou seja, para uma definição que a revela como representação: ficção simbólica ou mito. Ao lado de um modelo mítico hegemônico que privilegia o homogêneo, um outro modelo nacional é identificado, caracterizado pelo heterogêneo e auxiliando coletividades ex-cêntricas no seu esforço de identificação. Sendo uma

  2. Séparations par changement de phase. Etude et représentation des équilibres liquide-vapeur Separation by Phase Hange. Study and Computing Liquid-Vapor Equilibria

    Directory of Open Access Journals (Sweden)

    Asselineau L.

    2006-11-01

    Full Text Available Pour concevoir et optimiser les principales opérations de séparation (particulièrement les distillations avec ou sans solvant et l'extraction liquide-liquide on doit disposer de méthodes de corrélation ou, mieux, de prédiction des équilibres entre phases. A basse pression, et pour les mélanges d'hydrocarbures, les résultats présentés permettent la prévision des coefficients d'équilibre, même pour les séparations les plus délicates. En présence de constituants polaires, les données expérimentales d'équilibre liquide-liquide et liquide-vapeur de mélanges binaires et ternaires peuvent être simultanément corrélées dans le but de simuler et d'optimiser les distillations azéotropiques ou extractives. Sous haute pression, et particulièrement aux abords immédiats du point critique, le choix d'une équation d'état conduit à un traitement unitaire des phases en présence et permet, en particulier, la prédiction du lieu des points critiques des mélanges d'hydrocarbures et la corrélation de ce lieu en présence de solvants polaires. To determine and optimize the main separation operations (in particular distillations with or without a solvent, and liquid-liquid extraction correlation methods must be available or, better yet, methods of predicting phase equilibria. At low pressure and for hydrocarbon mixtures, the results described make the prediction of equilibrium coefficients possible, even for the most delicate separation. In the presence of polar constituents, the experimental data for the liquid-liquid and liquid-vapor equilibrium of binary and ternary mixtures can be simultaneously correlaten so as to simulate and optimize azeotropic or extractive distillations. Under high pressure and especially in the immediate vicinityof the critical point, the choice of an equation of state leads ta a unit treatment of the phases present and, in particular, makes it possible to predict the location of critical points in hydrocarbon

  3. Study of the machining of uranium carbide rods obtained by continuous casting under electronic bombardment; Etude de l'usinage de barreaux de carbure d'uranium obtenus par coulee continue sous bombardement electronique

    Energy Technology Data Exchange (ETDEWEB)

    Rousset, P; Accary, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The authors consider the various methods of machining uranium mono-carbide and compare them critically in the case of their application to uranium carbide obtained by fusion under an electronic bombardment and continuous casting. This study leads them to propose two mechanical machining methods: cylindrical rectification and center-less rectification, preceded by a preliminary roughing out of a cylinder, the latter appearing more suitable. A study of the machining yields as a function of the diameter of the rough bars and of the diameter of the finished rods has shown that an optimum value of the rough bar diameter exists for each value of the finished rod diameter. It is found that the yield increases as the diameter itself increases, this yield rising from 45 per cent to around 70 per cent as the diameter of the rough bars increases from 25-26 mm to 37-38 mm. (authors) [French] Les auteurs envisagent les differentes methodes d'usinage du monocarbure d'uranium et se livrent a une etude critique de celles-ci, dans le cas de leur application a l'usinage de barreaux de carbure d'uranium obtenus par fusion sous bombardement electronique et coulee continue. Cette etude les conduit a proposer deux methodes d'usinage mecanique: la rectification cylindrique et la rectification 'centerless', precedee d'un ebauchage par carottage, la seconde paraissant la plus appropriee. L'etude des rendements d'usinage en fonction du diametre des barreaux bruts et du diametre des barreaux finis, a mis en evidence une valeur optimale du diametre des barreaux bruts pour chaque valeur du diametre des barreaux usines. Elle a montre que le rendement croit lorsque le diametre croit lui-meme, ce rendement passant d'environ 45 pour cent a environ 70 pour cent, lorsque le diametre des barreaux bruts passe de 25-26 mm a 37-38 mm.

  4. Application du groupe de renormalisation aux conducteurs organiques quasi-unidimensionnels soumis a un champ magnetique

    Science.gov (United States)

    Hubert, Laurent

    Des conducteurs organiques fortement anisotropes presentent, sous l'effet d'un champ magnetique, une etonnante variete de proprietes physiques tel que: l'effet Shubnikov-de Haas, l'effet de Haas-van-Alphen, l'existence de cascades d'ondes de densite de spin apparentees a l'effet Hall quantique, reentrance vers la phase metallique pouvant provenir d'un 'breakdown' magnetique, et tout recemment la possibilite d'un confinement charge induit par le champ magnetique. A cela s'ajoute les nombreuses caracteristiques deja apparues en variant la pression hydrostatique ou la substitution chimique: separation spin-charge, localisation de la charge, transition spin-Peierls, antiferromagnetisme itinerant ou non, supraconductivite, et l'existence d'une frontiere commune entre les phases supraconductrice et antiferromagnetique. En vue de completer la description theorique du diagramme de phase generalise des conducteurs organiques, nous adaptons et elargissons la methode du groupe de renormalisation quantique (GRQ) au cas ou le champ magnetique est non nul. On sait deja que cette methode permet de resoudre le dilemme tout particulier des composes Q-1D, soit leur capacite de produire des transitions de phase malgre leur forte anisotropie et consequemment de leur faible dimensionalite. Cette methode est deja utilisee pour decrire le diagramme de phase temperature versus pression des sels de Bechgaard, de leurs analogues souffres et mixtes. Le GRQ permet aussi de comprendre comment des systemes anisotropes comme les conducteurs organiques peuvent se comporter comme des liquides de Luttinger a haute temperature et comme des liquides de Fermi ou condenses a basse temperature. Nous montrons que l'introduction d'un champ magnetique dans un regime de saut coherent interchai ne a deux particules n'apporte que de simples corrections aux lois d'echelles dans le canal zero son, alors qu'il introduit un mecanisme de brisure de paire dans le canal Cooper. Dans le regime de saut coherent a une

  5. PREFACE: Peyresq Physics Workshops 11 and 12—'Micro and Macro Structure of Spacetime', Peyresq, Alpes de Haute Provence, France (17 23 June 2006 and 16 22 June 2007)

    Science.gov (United States)

    Arteaga, D.; Verdaguer, E.

    2008-08-01

    This special issue is devoted to the proceedings of the workshops Peyresq Physics 11 and Peyresq Physics 12 on 'Micro and Macro Structure of Spacetime', which were held on the 17 23 June 2006 and 16 22 June 2007, respectively, in Peyresq, Alpes de Haute Provence, France, and organized by E Gunzig, B-L Hu and one of us (EV). These workshops are part of a series of annual meetings which bring together around 20 physicists active in different areas of theoretical physics. Uncovering the microscopic structures of spacetime is the goal of quantum gravity and string theory. It is often considered as the 'holy grail' of theoretical physics because it is believed that all fundamental forces are unified at that level of description. Macroscopic spacetime refers to astrophysical and cosmological structures and processes in the observable physical world, from black holes to the cosmos, from the second law to the arrow of time. The challenge theoretical physicists now face is to infer the micro structure of spacetime from the observed macro phenomena, and to deduce the multifarious manifestations of our world from any such candidate theory. To do so demands a careful re-examination of the foundational issues of quantum physics and general relativity (such as intrinsic and quantum gravity decoherence), the origin and nature of symmetries in spacetime (such as Lorentz symmetry) and the conditions where they may be violated, as well as their intersections (such as the physics of the early universe and the end states of black hole evolution). One asks how and why these two pillars of modern physics appear to be so incongruous with each other. Is it because their basic tenets and assumptions are at odds to each other? For these quests one needs to draw upon concepts and techniques from close disciplines such as those found in topology and geometry, or other subdisciplines of physics such as particle physics, strings and loops, statistical mechanics and mesoscopic phenomena, atomic

  6. Tubes légers à haute résistance pour des applications pétrolières marines Light High Strength Tubes for Offshore Petroeleum Applications

    Directory of Open Access Journals (Sweden)

    Corteville J.

    2006-11-01

    Full Text Available Les besoins nouveaux en tubes à haute résistance, créés par le développement actuel des gisements pétroliers marins, nous ont conduits à étudier des tubes composites particuliers, élaborés par enrouiement hélicoïdal de rubans d'acier minces à haute résistance enrobés d'une résine époxy polymérisable. Un mode de recouvrement adapté des rubans d'acier confère au composite une bonne étanchéité et des caractéristiques mécaniques élevées. Les propriétés physiques et chimiques de la matrice de résine permettent également d'obtenir une faible densité et une résistance convenable à la corrosion par les fluides pétroliers, l'eau de mer ou les boues de forage. Cette étude préliminaire comporte une analyse théorique simplifiée de ce type de structure composite, puis une partie expérimentale destinée a sélectionner les caractéristiques optimales de l'acier et de la résine et à vérifier les propriétés mécaniques et physico-chimiques obtenues sur ces tubes. Enfin, des exemples d'application en mer profonde destinés à comparer ces tubes composites aux tubes en acier sont présentés. Les premières conclusions de cette étude semblent confirmer l'intérêt de ce type de matériau pour ces applications. The new requirements for high-strength tubes created by thé current development of offshore oilfields led thé authors ta study thé development ot spécial composite tubes formed by thé spiral winding of high-strength thin steel strips coated with a polymerïzable epoxy resin. A particular method of overlapping thé steel strips makes the composite leakproof and leads to good mechanical properties: The physical and chemical properties of thé resin matrix also make for a low specific gravity and suitable résistance to corrosion coused by petroleum fluids, seawater or drilling mud. This preliminary article presents a simplified theoretical analysis of this type of composite structure, followed by an exp

  7. LIEN ENTRE LA LECTURE EN ARABE A VOIX HAUTE ET LA CONSCIENCE PHONOLOGIQUE CHEZ DES COLLEGIENS MAROCAINS DE LA REGION DE MRIRT, MAROC / RELATIONSHIP BETWEEN HIGH-VOICE ARAB READING AND PHONOLOGICAL CONSCIOUSNESS IN MOROCCAN COLLEGIANS IN THE MRIRT REGION, MOROCCO

    OpenAIRE

    Jamal El Azmy; Ahmed Ahami; Benaissa Badda; Khalid Ahaji

    2018-01-01

    La population de cette étude comprend 200 enfants appartenant aux trois niveaux scolaires du collège el Moukaouama Mrirt. Pour vérifier la présence d’un lien entre la lecture en arabe à voix haute et la conscience phonologique, les sujets ont subi trois tests de lecture : Lecture en Une Minute (LUM) vocalisés en arabe, Lecture en Une Minute (LUM) non vocalisés en arabe et pseudo-mots vocalisés en arabe et deux tests métaphonologiques en arabe : suppression de phonème initial en arabe et comp...

  8. Experimental study and modeling of the propagation of an alkaline concentration wave coming from a cement matrix an passing through the argilite of the Meuse / Haute-Marne laboratory

    International Nuclear Information System (INIS)

    Roussel, Th.

    2001-12-01

    The propagation of an alkaline wave through a clay rock has been investigated- The wave is generated by a cementitious matrix through the Callovo-Oxfordian argillite of the Meuse Haute-Marne Laboratory (-480 m depth). The argillite itself is composed of quartz, micas, calcite and an interstratified l/S. In order to characterise the interactions between the alkaline fluid and the argillaceous medium, dynamic column experiments have been carried out. The originality of the investigation methodology consists in exploiting the data generated from the breakthrough curves as well as from the characterisation of the solids extracted from the columns. Two types of processes having totally different reaction times have hence been thoroughly studied: - Fast surface adsorption and condensation reactions: On the one hand cation adsorption reactions by site ionisation have been characterised. They are responsible of the buffering effect of the clays. On the other hand an original reaction of calcium compound condensation in the interlayer space of the swelling clays has been revealed. These processes have been modelled and their simulations with the IMPACT calculation code showed that the models elaborated were very satisfying. - Strongly kinetically limited dissolution/precipitation reactions: The main primary phases dissolved are quartz and interstratified l/S. The precipitation of secondary phases are mainly C(A)SH and zeolites. After the injection of an alkaline fluid for 6 months at 60 deg C, the argillite is strongly amorphized but only 20 to 30% of the quartz and the interstratified I/S are dissolved. Therefore, dissolution kinetics of the primary phases and the solubility products of the main secondary phases have been determined. (author)

  9. Study of dense-plasma properties using very high-frequency electromagnetic waves (light waves); Etude des proprietes des plasmas denses au moyen d'ondes electromagnetiques de tres haute frequence (ondes lumineuses)

    Energy Technology Data Exchange (ETDEWEB)

    Gormezano, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    A study is made of methods based on the use of lasers for measuring the electronic density and temperature of dense plasmas (N{sub e} > 10{sup 15}e/cm{sup 3}): - an interferometric method using a gas laser, based on the. properties of the Perot-Fabry cavities; - a method making use of the 90 deg C scattering produced by the plasma on light emitted by a ruby laser. These methods have been applied to various dense plasmas: - high-frequency plasma torch; - azimuth compression; - plasma bursts produced by focussing a laser beam on a metal target. The measurements have also been carried out using conventional methods of diagnosis. It has thus been possible to measure densities of between 5.10{sup 15} and 10{sup 19} e/cm{sup 3} and temperatures of between 3 and 10 eV. These different-methods are then compared, (author) [French] On etudie la mesure de la densite et de la temperature electronique des plasmas denses (N{sub e} > 10{sup 15} e/cm{sup 3}) a I'aide de methodes utilisant des lasers: - une methode interferometrique utilisant un laser a gaz, basee sur les proprietes des cavites Perot Fabry; -- une methode utilisant la diffusion a 900 deg C par le plasma de la lumiere issue d'un laser a rubis. Ces methodes ont ete appliquees sur differents plasmas denses: - Torche a plasma haute-frequence; - Compression azimutale; - Bouffees de plasma produites par la focalisation d'un faisceau laser sur une cible metallique. Les mesures ont ete egalement faites a I'aide de diagnostics classiques. On a pu ainsi mesurer des densites comprises entre 5.10{sup 15} et 10{sup 19} e/cm{sup 3} et des temperatures comprises entre 3 et 10 eV. On compare ensuite ces differentes methodes. (auteur)

  10. Study of dense-plasma properties using very high-frequency electromagnetic waves (light waves); Etude des proprietes des plasmas denses au moyen d'ondes electromagnetiques de tres haute frequence (ondes lumineuses)

    Energy Technology Data Exchange (ETDEWEB)

    Gormezano, C. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    A study is made of methods based on the use of lasers for measuring the electronic density and temperature of dense plasmas (N{sub e} > 10{sup 15}e/cm{sup 3}): - an interferometric method using a gas laser, based on the. properties of the Perot-Fabry cavities; - a method making use of the 90 deg C scattering produced by the plasma on light emitted by a ruby laser. These methods have been applied to various dense plasmas: - high-frequency plasma torch; - azimuth compression; - plasma bursts produced by focussing a laser beam on a metal target. The measurements have also been carried out using conventional methods of diagnosis. It has thus been possible to measure densities of between 5.10{sup 15} and 10{sup 19} e/cm{sup 3} and temperatures of between 3 and 10 eV. These different-methods are then compared, (author) [French] On etudie la mesure de la densite et de la temperature electronique des plasmas denses (N{sub e} > 10{sup 15} e/cm{sup 3}) a I'aide de methodes utilisant des lasers: - une methode interferometrique utilisant un laser a gaz, basee sur les proprietes des cavites Perot Fabry; -- une methode utilisant la diffusion a 900 deg C par le plasma de la lumiere issue d'un laser a rubis. Ces methodes ont ete appliquees sur differents plasmas denses: - Torche a plasma haute-frequence; - Compression azimutale; - Bouffees de plasma produites par la focalisation d'un faisceau laser sur une cible metallique. Les mesures ont ete egalement faites a I'aide de diagnostics classiques. On a pu ainsi mesurer des densites comprises entre 5.10{sup 15} et 10{sup 19} e/cm{sup 3} et des temperatures comprises entre 3 et 10 eV. On compare ensuite ces differentes methodes. (auteur)

  11. Agriculture itinérante sur brûlis (AIB et plantes cultivées sur le haut Maroni: étude comparée chez les Aluku et les Wayana en Guyane française

    Directory of Open Access Journals (Sweden)

    Marie Fleury

    Full Text Available Résumé Vers la fin du 18e siècle, les Noirs marrons Aluku, descendants d’esclaves rebelles fuyant les plantations hollandaises et les Amérindiens Wayana, arrivant du Brésil, où ils fuyaient les chasseurs d’esclaves, se sont rencontrés sur le haut Maroni, en Guyane française. Ce partage d’un même lieu de vie a été l’occasion d’échanger un grand nombre de techniques, notamment en ce qui concerne l’agriculture itinérante sur brûlis, et les plantes cultivées. Toutefois notre étude montre que le culte des ancêtres chez les Noirs marrons a modifié leur cycle cultural (via la culture du riz, influençant ainsi leur gestion de l’environnement. De même la nature et la diversité des plantes cultivées diffèrent sensiblement en fonction des usages traditionnels et habitudes culinaires des deux sociétés. Les Aluku ont sélectionné de nombreuses espèces et variétés de plantes qui leur sont propres et sont liées à leurs racines africaines. Les Amérindiens cultivent des plantes spécifiques utiles au chamanisme (tabac et à leur artisanat traditionnel. De plus, leur perception de la nature implique des pratiques cultuelles différentes notamment avant le défrichage. Cette étude illustre l’influence de la diversité culturelle sur la gestion de l’agrobiodiversité et, de manière plus générale, sur l’adaptation de l’homme à son environnement.

  12. Experimental study of columns partially filled with concrete under compressive axial loads Etude expérimentale des colonnes partiellement remplis par le béton sous charge axiale

    Directory of Open Access Journals (Sweden)

    Achoura D.

    2012-09-01

    Full Text Available Dans cette étude, on présente les résultats expérimentaux obtenus sur des poteaux mixtes béton-acier mince réalisés par soudures. Un total de 24 profilés en acier, et en forme de I a été testé sous charge de compression uni-axiale à l’âge de 28 jours. les spécimens ont été réparties comme suit: 4 à vides, 4 partiellement remplies avec un béton ordinaire sans l’addition des connecteurs, 4 renforcés par des connecteurs de cisaillements de type cornière en U, 4 autres l’ont été avec des connecteurs de cisaillements type goujons et 8 restants ont été renforcés avec des liens transversaux d’espacement 100mm, 50mm, soudés aux bouts des ailes opposées. Les principaux paramètres étudiés sont: l’élancement du profilé, le type de connecteur de renforcement. A partir des résultats d’essais obtenus, il est confirmé que les parois minces sont plus sensibles de l’apparition au voilement et la longueur des profilés a un effet considérable sur la capacité portante et le mode de rupture. L’addition des connecteurs de renforcement a confirmé l’augmentation de la charge ultime par rapport aux profilés sans connecteurs. In the present work, results of tests conducted on thin welded steel-concrete stubs are presented. A total of 24 stubs an I steel section were tested under axial compression at 28 days after the date of casting, 4 were empty, 4 filled with normal concrete, 8 columns had shear connecters welded along the centreline of the web, and 8 columns had steel rods welded between the tips of opposing flanges on both sides of the spacing of the transverse link 100 mm and 50 mm. The main parameters studied were: the heel height, and type of connector strengthening. From the test results, it is confirmed that the thin walls are more sensitive to the appearance local buckling and the length of the profiles has a significant effect on the bearing capacity and failure mode. The bearing capacity was increased

  13. Study of the machining of uranium carbide rods obtained by continuous casting under electronic bombardment; Etude de l'usinage de barreaux de carbure d'uranium obtenus par coulee continue sous bombardement electronique

    Energy Technology Data Exchange (ETDEWEB)

    Rousset, P.; Accary, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The authors consider the various methods of machining uranium mono-carbide and compare them critically in the case of their application to uranium carbide obtained by fusion under an electronic bombardment and continuous casting. This study leads them to propose two mechanical machining methods: cylindrical rectification and center-less rectification, preceded by a preliminary roughing out of a cylinder, the latter appearing more suitable. A study of the machining yields as a function of the diameter of the rough bars and of the diameter of the finished rods has shown that an optimum value of the rough bar diameter exists for each value of the finished rod diameter. It is found that the yield increases as the diameter itself increases, this yield rising from 45 per cent to around 70 per cent as the diameter of the rough bars increases from 25-26 mm to 37-38 mm. (authors) [French] Les auteurs envisagent les differentes methodes d'usinage du monocarbure d'uranium et se livrent a une etude critique de celles-ci, dans le cas de leur application a l'usinage de barreaux de carbure d'uranium obtenus par fusion sous bombardement electronique et coulee continue. Cette etude les conduit a proposer deux methodes d'usinage mecanique: la rectification cylindrique et la rectification 'centerless', precedee d'un ebauchage par carottage, la seconde paraissant la plus appropriee. L'etude des rendements d'usinage en fonction du diametre des barreaux bruts et du diametre des barreaux finis, a mis en evidence une valeur optimale du diametre des barreaux bruts pour chaque valeur du diametre des barreaux usines. Elle a montre que le rendement croit lorsque le diametre croit lui-meme, ce rendement passant d'environ 45 pour cent a environ 70 pour cent, lorsque le diametre des barreaux bruts passe de 25-26 mm a 37-38 mm.

  14. Kinetic Modeling of Vacuum Gas Oil Hydrotreatment using a Molecular Reconstruction Approach Modélisation cinétique de l’hydrotraitement de distillats sous vide utilisant une approche de reconstruction moléculaire

    Directory of Open Access Journals (Sweden)

    Charon-Revellin N.

    2010-10-01

    Full Text Available Vacuum Gas Oils (VGO are heavy petroleum cuts (boiling points ranging from 350 to 550 ˚C that can be transformed into valuable fuels (gasolines, diesels by fluid catalytic cracking or hydrocracking. Prior to these conversion processes, hydrotreating is required in order to eliminate the impurities in VGOs. The hydrotreatment process enables to meet the environmental specifications (total sulfur contents and to prevent nitrogen poisoning of conversion catalysts. In order to develop a kinetic model based on an accurate VGOs molecular description, innovative analytical tools and molecular reconstruction techniques were used in this work. A lumped model using a Langmuir-Hinshelwood representation was developed for hydrodearomatization, hydrodesulfurization and hydrodenitrogenation of the VGO. This lumped model was successfully applied to the experimental feed pretreatment data and was able to predict evolution of concentration of the aromatics, nitrogen and sulfur species. Les Distillats Sous Vide (DSV sont des coupes pétrolières lourdes (gamme de températures d'ébullition 350 à 550 °C qui peuvent être valorisées en carburants (essence, gazole par craquage catalytique ou par hydrocraquage. Un hydrotraitement est requis avant ces procédés de conversion afin d'éliminer les impuretés du DSV. De cette manière, le procédé d'hydrotraitement permet d'attendre les spécifications environnementales (teneur en soufre ainsi que de prévenir l'empoisonnement par les composés azotés des catalyseurs de conversion. De manière à pouvoir développer un modèle cinétique basé sur une description moléculaire précise des DSV, des outils analytiques innovant et des techniques de reconstruction moléculaire ont été utilisés dans ce travail. Un modèle cinétique de regroupement utilisant une représentation de type Langmuir-Hinshelwood a été développé pour l'hydrodésaromatisation, l'hydrodésulfuration et l'hydrodésazotation des DSV. Ce

  15. Experimental study and modeling of the propagation of an alkaline concentration wave coming from a cement matrix an passing through the argilite of the Meuse / Haute-Marne laboratory; Etude experimentale et modelisation de la propagation d'une onde de concentration alcaline issue d'une matrice cimentiere a travers l'argilite du site du laboratoire Meuse / Haute-Marne

    Energy Technology Data Exchange (ETDEWEB)