Operational water consumption and withdrawal factors for electricity generating technologies: a review of existing literature

International Nuclear Information System (INIS)

Macknick, J; Newmark, R; Heath, G; Hallett, K C

2012-01-01

This report provides estimates of operational water withdrawal and water consumption factors for electricity generating technologies in the United States. Estimates of water factors were collected from published primary literature and were not modified except for unit conversions. The water factors presented may be useful in modeling and policy analyses where reliable power plant level data are not available. Major findings of the report include: water withdrawal and consumption factors vary greatly across and within fuel technologies, and water factors show greater agreement when organized according to cooling technologies as opposed to fuel technologies; a transition to a less carbon-intensive electricity sector could result in either an increase or a decrease in water use, depending on the choice of technologies and cooling systems employed; concentrating solar power technologies and coal facilities with carbon capture and sequestration capabilities have the highest water consumption values when using a recirculating cooling system; and non-thermal renewables, such as photovoltaics and wind, have the lowest water consumption factors. Improved power plant data and further studies into the water requirements of energy technologies in different climatic regions would facilitate greater resolution in analyses of water impacts of future energy and economic scenarios. This report provides the foundation for conducting water use impact assessments of the power sector while also identifying gaps in data that could guide future research. (letter)

Consideration of insects as a source of dietary protein for human consumption.

Science.gov (United States)

Churchward-Venne, Tyler A; Pinckaers, Philippe J M; van Loon, Joop J A; van Loon, Luc J C

2017-12-01

Consumption of sufficient dietary protein is fundamental to muscle mass maintenance and overall health. Conventional animal-based protein sources such as meat (ie, beef, pork, lamb), poultry, fish, eggs, and dairy are generally considered high-quality sources of dietary protein because they meet all of the indispensable amino-acid requirements for humans and are highly digestible. However, the production of sufficient amounts of conventional animal-based protein to meet future global food demands represents a challenge. Edible insects have recently been proposed as an alternative source of dietary protein that may be produced on a more viable and sustainable commercial scale and, as such, may contribute to ensuring global food security. This review evaluates the protein content, amino-acid composition, and digestibility of edible insects and considers their proposed quality and potential as an alternative protein source for human consumption. © The Author(s) 2017. Published by Oxford University Press on behalf of the International Life Sciences Institute. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Consumer Culture Theory: Ideology, Mythology and Meaning in Technology Consumption

DEFF Research Database (Denmark)

Bajde, Domen

2014-01-01

innovations, thus shaping the value of technologies as cultural resources sustaining consumer identities. In its urge to shed light on these aspects, CCT tends to reinforce the gaps and asymmetries between the “socio-cultural” and the “techno-material”, leaving plenty of room for further study. The authors......Consumer culture theory helps us take note of the cultural forces and dynamics in which technology consumption is entangled. It enables people to articulate the cultural processes (ideological, mythic, ritualistic, etc.) through which cultural meanings become granted to or denied to technological...

Survey on the consumptions of energy sources in the industry in Italy in 1999

International Nuclear Information System (INIS)

Iorio, G.; Perrella, G.; Ballin, M.; Mercanti, A.; Poggi, A.

2001-01-01

This report has the aim to introduce the results of the sampling survey performed to determinate the consumption of energy sources (electricity, natural gas, fuel oil, diesel oil, etc.) in the italian industry. The energy consumptions report to 1999 and they are disaggregated for typology of use: energy consumptions for productive uses, for production of energy and for traction. The energy intensive sectors and the great industries have represented the nucleus of survey. Particular attention has been devoted to the production of energy and the consumption of heat [it

Consumption of forest chips as an energy source as part of the national action plan for renewable energy

International Nuclear Information System (INIS)

Ylitalo, E.

2004-01-01

A specific Action Plan for Renewable Energy was introduced in 1999 in order to increase the utilisation of renewable energy sources in Finland. The Plan was renewed in 2002, taking into account a revision of the goals defined in the statements given by the Parliament in the de-bate on national Climate Strategy and the decision on building a new nuclear power plant. The main reason for increasing the consumption of renewable energy is the aim of decreasing emissions of greenhouse gases caused by fossil fuels. The renewed Action Plan includes aims and means of how to increase the consumption of renewable energy in practice in the future. Specific goals for separate renewable energy sources were set for the years 2005, 2010 and 2025. Proportional targets were set for the consumption of forest chips: in 2010 consumption is expected to be four times larger than in 2001 and in 2025 seven times larger. In Finland, the most important source for renewable energy is wood and wood waste, which currently makes up approximately 20 per cent of total energy consumption. Wood waste (incl. waste liquor and solid wood waste) produced by the forest industries can be considered as being fully utilized at the moment. Therefore, the most important means of increasing the consumption of wood energy in the future is in the utilisation of forest chips resources. Since 2000, the Finnish Forest Re-search Institute has compiled statistics on the consumption of forest chips and forest industry by-products used in energy generation. One aim of these statistics is to monitor the fruition of the Action Plan mentioned. In 2003, the volume of forest chips consumed in energy generation was 2.1 mill. m3, i.e. approximately five per cent of all energy sources consumed. According to the statistics, the consumption of forest chips has doubled during the period 2000-2003 with an annual average increase of 0.4 mill. m 3 . The goals set in the Action Plan can be considered to be high. In order to achieve

The energy consumption and environmental impacts of SCR technology in China

Energy Technology Data Exchange (ETDEWEB)

Liang, Zengying; Ma, Xiaoqian; Lin, Hai; Tang, Yuting [School of Electric Power, Guangdong Key Laboratory of Clean Energy Technology, South China University of Technology, Guangzhou 510640 (China)

2011-04-15

Energy and environment are drawing greater attention today, particularly with the rapid development of the economy and increase consumption of energy in China. At present, coal-fired power plants are mainly responsible for atmospheric air pollution. The selective catalytic reduction (SCR) technology is a highly effective method for NO{sub X} control. The present study identified and quantified the energy consumption and the environmental impacts of SCR system throughout the whole life cycle, including production and transportation of manufacturing materials, installation and operation of SCR technology. The analysis was conducted with the utilization of life cycle assessment (LCA) methodology which provided a quantitative basis for assessing potential improvements in the environmental performance of the system. The functional unit of the study was 5454 t NO{sub X} emission from an existing Chinese pulverized coal power plant for 1 year. The current study compared life cycle emissions from two types of de-NO{sub X} technologies, namely the SCR technology and the selective non-catalytic reduction (SNCR) technology, and the case that NO{sub X} was emitted into atmosphere directly. The results showed that the environmental impact loading resulting from SCR technology (66810 PET{sub 2000}) was smaller than that of flue gas emitted into atmosphere directly (164121 PET{sub 2000}) and SNCR technology (105225 PET{sub 2000}). More importantly, the SCR technology is much more effective at the elimination of acidification and nutrient enrichment than SNCR technology and the case that NO{sub X} emitted into atmosphere directly. This SCR technology is more friendly to the environment, and can play an important role in NO{sub X} control for coal-fired power plants as well as industrial boilers. (author)

Survey on the consumptions of energy sources in the tertiary sector in Italy in 1999

International Nuclear Information System (INIS)

Iorio, G.; Perrella, G.; Ballin, M.

2001-01-01

This report has the aim to introduce the results of the sampling survey performed to determinate the consumption of energy sources (electricity, natural gas, fuel oil, diesel oil, etc.) in the tertiary sector. The energy consumptions report to 1999 and they are disaggregated for typology of use: energy consumptions for productive uses, for production of energy and for traction. The economic energy intensive activities have represented the nucleus of the survey. Particular attention has been devoted to the production of energy and the consumption of heat [it

Consumptive Water Use from Electricity Generation in the Southwest under Alternative Climate, Technology, and Policy Futures.

Science.gov (United States)

Talati, Shuchi; Zhai, Haibo; Kyle, G Page; Morgan, M Granger; Patel, Pralit; Liu, Lu

2016-11-15

This research assesses climate, technological, and policy impacts on consumptive water use from electricity generation in the Southwest over a planning horizon of nearly a century. We employed an integrated modeling framework taking into account feedbacks between climate change, air temperature and humidity, and consequent power plant water requirements. These direct impacts of climate change on water consumption by 2095 differ with technology improvements, cooling systems, and policy constraints, ranging from a 3-7% increase over scenarios that do not incorporate ambient air impacts. Upon additional factors being changed that alter electricity generation, water consumption increases by up to 8% over the reference scenario by 2095. With high penetration of wet recirculating cooling, consumptive water required for low-carbon electricity generation via fossil fuels will likely exacerbate regional water pressure as droughts become more common and population increases. Adaptation strategies to lower water use include the use of advanced cooling technologies and greater dependence on solar and wind. Water consumption may be reduced by 50% in 2095 from the reference, requiring an increase in dry cooling shares to 35-40%. Alternatively, the same reduction could be achieved through photovoltaic and wind power generation constituting 60% of the grid, consistent with an increase of over 250% in technology learning rates.

Investment appraisal of technology innovations on dairy farm electricity consumption

NARCIS (Netherlands)

Upton, J.; Murphy, M.; Boer, de I.J.M.; Groot Koerkamp, P.W.G.; Berentsen, P.B.M.; Shalloo, L.

2015-01-01

The aim of this study was to conduct an investment appraisal for milk-cooling, water-heating, and milk-harvesting technologies on a range of farm sizes in 2 different electricity-pricing environments. This was achieved by using a model for electricity consumption on dairy farms. The model simulated

Information communication technology and electricity consumption in emerging economies

International Nuclear Information System (INIS)

Sadorsky, Perry

2012-01-01

This study examines the impact of information communication technology (ICT) on electricity consumption in emerging economies. The empirical results, obtained from dynamic panel demand models, show a positive and statistically significant relationship between ICT and electricity consumption when ICT is measured using internet connections, mobile phones or the number of PCs. Long-run ICT elasticities are smaller than income elasticities but because ICT growth rates are so much higher than income growth rates, the impact of ICT on electricity demand is greater than the impact of income on electricity demand. One implication of these results is that policies designed to close the “digital divide” between developed and developing economics by increasing the adoption of ICT in developing countries are put at odds with energy policies to reduce GHG emissions. - Highlights: ► ICT usage is growing rapidly in developing countries. ► ICT usage affects electricity consumption. ► Three different measures of ICT are examined. ► Short-run and long-run ICT elasticities are calculated. ► Implications for energy policy are discussed.

Investment appraisal of technology innovations on dairy farm electricity consumption.

Science.gov (United States)

Upton, J; Murphy, M; De Boer, I J M; Groot Koerkamp, P W G; Berentsen, P B M; Shalloo, L

2015-02-01

The aim of this study was to conduct an investment appraisal for milk-cooling, water-heating, and milk-harvesting technologies on a range of farm sizes in 2 different electricity-pricing environments. This was achieved by using a model for electricity consumption on dairy farms. The model simulated the effect of 6 technology investment scenarios on the electricity consumption and electricity costs of the 3 largest electricity-consuming systems within the dairy farm (i.e., milk-cooling, water-heating, and milking machine systems). The technology investment scenarios were direct expansion milk-cooling, ice bank milk-cooling, milk precooling, solar water-heating, and variable speed drive vacuum pump-milking systems. A dairy farm profitability calculator was combined with the electricity consumption model to assess the effect of each investment scenario on the total discounted net income over a 10-yr period subsequent to the investment taking place. Included in the calculation were the initial investments, which were depreciated to zero over the 10-yr period. The return on additional investment for 5 investment scenarios compared with a base scenario was computed as the investment appraisal metric. The results of this study showed that the highest return on investment figures were realized by using a direct expansion milk-cooling system with precooling of milk to 15°C with water before milk entry to the storage tank, heating water with an electrical water-heating system, and using standard vacuum pump control on the milking system. Return on investment figures did not exceed the suggested hurdle rate of 10% for any of the ice bank scenarios, making the ice bank system reliant on a grant aid framework to reduce the initial capital investment and improve the return on investment. The solar water-heating and variable speed drive vacuum pump scenarios failed to produce positive return on investment figures on any of the 3 farm sizes considered on either the day and night

Ion Source Physics and Technology (1/2)

CERN Multimedia

CERN. Geneva

2016-01-01

This series of lectures starts with an introduction in some aspects of atomic and plasma physics as base for the ion source physics. The main part covers aspects of ion source physics, technology and operation. Several source types are presented. Some information on infrastructure and supporting services (as high voltage, cooling, microwaves etc) are given to better understand the source environment. The last part on engineering aims to show that, in the field of ion sources, many different technologies are combined in a quite small environment, which is challenging and interesting at the same time.

Ion Source Physics and Technology (2/2)

CERN Multimedia

CERN. Geneva

2016-01-01

This series of lectures starts with an introduction in some aspects of atomic and plasma physics as base for the ion source physics. The main part covers aspects of ion source physics, technology and operation. Several source types are presented. Some information on infrastructure and supporting services (as high voltage, cooling, microwaves etc) are given to better understand the source environment. The last part on engineering aims to show that, in the field of ion sources, many different technologies are combined in a quite small environment, which is challenging and interesting at the same time.

Technological regimes and sources of entrepreneurship

NARCIS (Netherlands)

Marsili, O.

2000-01-01

This paper concerns the technological detenninants of entrepreneurial behaviour. By applying a typology of technological regimes, which describes the nature of the technological environment in which finns operate, this paper examines the sources and obstacle to entrepreneurial entry related to the

Technological regimes and sources of entrepreneurship

NARCIS (Netherlands)

Marsili, O.

2002-01-01

This paper concerns the technological determinants of entrepreneurial behaviour. By applying a typology of technological regimes, which describes the nature of the technological environment in which firms operate, this paper examines the sources and obstacles to entrepreneurial entry related to the

Source Taxation of Technological Services in Finnish Tax Treaties

OpenAIRE

Kiviranta, Tuomas

2016-01-01

In this study, I analyze the various means of source taxation of technological and other services permitted by Finnish double taxation conventions and the future of source taxation of technological and other services. I attempt to shed light on the various means of source taxation of technological services permitted by Finnish tax treaties and by tax treaties also more generally. I analyze 1) the taxation of technological services in the source country as the profits of a permanent establishm...

Operational Water Withdrawal and Consumption Factors for Electricity Generation Technology in China—A Literature Review

Directory of Open Access Journals (Sweden)

Jinjing Gao

2018-04-01

Full Text Available As two indispensable resources for human development, energy and water are closely related. China, as the world’s largest consumer of electricity, is also experiencing very serious water shortages. Understanding the water consumption intensity in various types of electric power production technologies according to China’s national conditions is a prerequisite for understanding the potential impact of electrical power production on water resources. Therefore, following the steps of a meta-analysis, this paper provides a literature review on operational water withdrawal and consumption factors for electricity generation technology in China. We observed that 50% of water consumption for electricity generation was for coal power, whereas there was no research on the water consumption intensity of natural gas power generation, and a shortage of studies on water intake during electrical power production. The average water consumption intensity of hydropower is the largest. The results indicate that compared with other fuel types, hydropower is not a sustainable energy with respect to water conservation, and the study of hydropower applications should be improved in China.

How Growing Complexity of Consumer Choices and Drivers of Consumption Behaviour Affect Demand for Animal Source Foods.

Science.gov (United States)

Perry, B D; Grace, D C

2015-12-01

Many societies are spoiled for choice when they purchase meat and other livestock products, and around the globe food choice has grown dramatically in the last two decades. What is more, besides the cost and obvious health concerns influencing commodity section, an increasing proportion of choices is made to contribute to the achievement of certain ideals, such as natural resource management, climate change mitigation, animal welfare concerns and personal lifestyle. At the same time, human health considerations are becoming more important for consumption choices as richer societies, and increasingly the urban poor in low- and middle-income countries, face an unprecedented epidemic of over-consumption and associated diet-related non-communicable diseases. Animal source foods are considered significant contributors to this trend. This paper reviews this complicated arena, and explores the range of considerations that influence consumers' preferences for meat and other animal source foods. This paper also argues that deeper drivers of consumption behaviour of many foods may act in opposition to the articulated preferences for choices around animal source food consumption. We review how the returns to different causes are being valued, how emerging metrics are helping to manage and influence consumption behaviours, and draw conclusions regarding options which influence food choice.

The impact of information and communication technologies on electricity consumption in Germany

Energy Technology Data Exchange (ETDEWEB)

Cremer, Clemens; Schlomann, Barbara; Friedewald, Michael [Fraunhofer Inst. Systems and Innovation Research, Karlsruhe (Germany)

2003-07-01

The importance of information and communication technologies in everyday life is increasing strongly. The growing penetration of PCs in households and offices and the almost ubiquitous use of mobile communication devices are vivid examples for this development. The key drivers influencing the penetration, usage patterns and specific energy consumption of IC-equipment were examined and a bottom-up analysis of the direct energy consumption of ICT-equipment in households and offices was made for 2001 resulting an energy demand of 38 TWh. In addition, projections for the years 2005 and 2010 were developed based on the base year consumption and the key driving forces, which showed an increase of ICT energy consumption to 55 TWh in 2010. The energy consumption was analysed in normal operation mode, standby and off-mode. A differentiation was made between end-use appliances and the ICT-infrastructure in buildings for both residential and commercial use. This made it possible to identify the appliances and the infrastructure equipment with the highest growth in energy consumption and to examine the options and potentials for the increase of energy efficiency. This paper gives an overview of the state and development of the energy consumption of ICT equipment as well as the key driving forces and savings potentials in this field.

Vacuum Technology for Ion Sources

International Nuclear Information System (INIS)

Chiggiato, P

2013-01-01

The basic notions of vacuum technology for ion sources are presented, with emphasis on pressure profile calculation and choice of pumping technique. A Monte Carlo code (Molflow+) for the evaluation of conductances and the vacuum-electrical analogy for the calculation of time-dependent pressure variations are introduced. The specific case of the Linac4 H - source is reviewed. (author)

Patterns and sources of alcohol consumption preceding alcohol-affected attendances to a New Zealand hospital emergency department.

Science.gov (United States)

Das, Manidipa; Stewart, Rebecca; Ardagh, Michael; Deely, Joanne M; Dodd, Stuart; Bartholomew, Nadia V; Pearson, Scott; Spearing, Ruth; Williams, Tracey; Than, Martin

2014-08-29

To perform a descriptive study of the drinking behaviour (amounts, types, sources of alcohol consumed) preceding alcohol-affected presentations to Christchurch Hospital Emergency Department (ED). Over 336 hours in the ED, patients with recent alcohol consumption or alcohol-related attendances were identified, classified as alcohol-affected or alcohol- unaffected, and invited to consent to answering questions on types, amounts and sources of alcohol consumed in the drinking session preceding or implicated in their ED attendance. Demographic information and level of intoxication were also recorded. Data were summarised descriptively. Alcohol-affected patients were more frequently young (16-25 years) and male. Median alcohol consumption was 14 (range 1 to 71) standard drinks. Beer was the most popular beverage (34%), but spirits (23%), ready-to-drink mixes (21%) and wine (20%) were also popular. Liquor stores (45%) were the most popular source of alcohol, followed by on-licence premises (25%), and supermarkets (21%). The popularity of different types of beverages and their source varied according to patient age and gender. Consumption of large amounts, as well as allegedly 'safe' amounts, of a range of alcoholic beverages, most commonly from an off-licence source, contributed to alcohol-affected presentations to the ED. Beverage and source popularity varied by age and gender.

Energy consumption trends in Hawaii

International Nuclear Information System (INIS)

Kaya, Abidin; Yalcintas, Melek

2010-01-01

This study begins with a review of energy consumption by end-use sector in Hawaii. Then, the energy generated from renewable energy sources is analyzed between 1991 and 2006. The results show that while geothermal is a considerable source of renewable energy on the Island of Hawaii (also known as Big Island), fossil fuel is the main energy source in the State of Hawaii. The energy intensity index for the State of Hawaii is then calculated by dividing energy consumption per capita by the income per capita. The calculated energy intensity index reveals that energy consumption is directly controlled by per capita income. The results also indicate that the energy intensity index increases over time despite positive developments in energy efficient technologies. In the second part of the paper, the effect of the tourism industry on energy usage in the State of Hawaii is analyzed. The results show that tourism volume, measured in terms of tourist arrival numbers, does not change the energy consumption directly. However, a change in tourism volume does affect per capita income within a few months to a year. In the last part of the study, the energy efficiency index of Hawaii is compared with consumption averages for the US, California and the most energy efficient country in Europe, Denmark. The comparison shows that Hawaii lags behind California and Denmark in terms of energy efficiency. The comparison also shows that an increase in energy efficiency corresponds to an increase in per capita income across the board, which is in agreement with a recent report published by the American Physical Society.

Is this the end of the paper? Technological advances and their potential impacts on the consumption of paper

Directory of Open Access Journals (Sweden)

Gustavo Hermínio Salati Marcondes de Moraes

2012-06-01

Full Text Available The supply and use of information technology have changed the profile of individuals worldwide. The analysis of the profile of Brazilian citizens indicates that the supply of information technology and the profile of the population changed in recent decades, separately or together. By obtaining an index such as, education, access to mobile telephony and computers with internet access, we can perceive changes in the habits of Brazil in recent years. With the increasing technological advances such as the emergence of tablet-PCs, e-paper, smartphones, digital cameras, among others, there is a growing expectation of a decrease in paper consumption. On the other hand, greater access to information - with internet available in several locations at low cost - and technologies such as printers increasingly affordable prices, tends to increase the volume of impressions, as well as the consumption of equipment increases the consumption of packaging based on paper. This study drew statistical studies between the increased use of information technology and paper consumption in the Brazilian market, using data for twenty years - from 1990 to 2009 - Bracelpa (Associação Brasileira de Celulose e Papel and the Annual Survey of Management Resources for Informatics at the Fundação Getúlio Vargas – Escola de Administração do Estado de São Paulo (FGV-EAESP. Through the literature review on the topic and statistical tests, it was investigated whether corporate investments in information technology provided to reduce the consumption of certain types of papers in Brazilian marketplace. To answer the hypotheses, we performed a correlation between the development of paper consumption, according to the types (newsprint, printing and writing, and investments in information technology, according to the sectors (services, industry and trade. The results corroborate the earlier study, developed by Moraes Meirelles and Nacimiento (2010, which was analyzed in a

Applying Smart Grid Technology For Reducing Electric Energy Consumption

Energy Technology Data Exchange (ETDEWEB)

Hoffman, Roy

2010-09-15

In recent years the term 'Smart Grid' has become a widely used buzz word with respect to the operation of Electric Power Systems. One analysis has suggested that a Smart Grid could potentially reduce annual energy consumption in the USA by 56 to 203 billion kWh in 2030, corresponding to a 1.2 to 4.3% reduction in projected retail electricity sales in 2030. This paper discusses some of the smart grid technologies pertaining to the operation of electric power distribution networks.

Consumption and sources of added sugar in Indonesia: a review.

Science.gov (United States)

Atmarita; Imanningsih, Nelis; Jahari, Abas B; Permaesih, Ir Dewi; Chan, Pauline; Amarra, Maria Sofia

2018-01-01

The present report summarized the best available evidence regarding consumption level and sources of free or added sugars in Indonesia. Information was extracted from food balance sheets, household expenditure surveys, nutrition surveys, published studies, unpublished theses/ dissertations, and government reports. A total of 18 references were obtained, showing varying results. Indonesia's national surveys suggested intakes of sugar below 50 grams per day or below 10% of energy intake. Published studies suggested higher levels of intake. Studies used expenditure surveys or a single day of recall to determine dietary intake. None made use of biomarkers to determine the level of sugar intake. The 2014 Total Diet Study estimated that 11.8% of the population consumed >50 grams sugar per day. Common food sources were table sugar, wheat products, milk products, sweetened drinks, condiments, candies and chocolate products. Insufficient evidence exists regarding the levels and sources of added sugar intake of different population groups in Indonesia. A nationwide survey using multiple (at least two) 24-hour recalls to allow estimation of usual intake and to identify food sources, and the use of biomarkers to validate intake will provide more accurate information on which to base policy decisions.

Estimating average alcohol consumption in the population using multiple sources: the case of Spain.

Science.gov (United States)

Sordo, Luis; Barrio, Gregorio; Bravo, María J; Villalbí, Joan R; Espelt, Albert; Neira, Montserrat; Regidor, Enrique

2016-01-01

National estimates on per capita alcohol consumption are provided regularly by various sources and may have validity problems, so corrections are needed for monitoring and assessment purposes. Our objectives were to compare different alcohol availability estimates for Spain, to build the best estimate (actual consumption), characterize its time trend during 2001-2011, and quantify the extent to which other estimates (coverage) approximated actual consumption. Estimates were: alcohol availability from the Spanish Tax Agency (Tax Agency availability), World Health Organization (WHO availability) and other international agencies, self-reported purchases from the Spanish Food Consumption Panel, and self-reported consumption from population surveys. Analyses included calculating: between-agency discrepancy in availability, multisource availability (correcting Tax Agency availability by underestimation of wine and cider), actual consumption (adjusting multisource availability by unrecorded alcohol consumption/purchases and alcohol losses), and coverage of selected estimates. Sensitivity analyses were undertaken. Time trends were characterized by joinpoint regression. Between-agency discrepancy in alcohol availability remained high in 2011, mainly because of wine and spirits, although some decrease was observed during the study period. The actual consumption was 9.5 l of pure alcohol/person-year in 2011, decreasing 2.3 % annually, mainly due to wine and spirits. 2011 coverage of WHO availability, Tax Agency availability, self-reported purchases, and self-reported consumption was 99.5, 99.5, 66.3, and 28.0 %, respectively, generally with downward trends (last three estimates, especially self-reported consumption). The multisource availability overestimated actual consumption by 12.3 %, mainly due to tourism imbalance. Spanish estimates of per capita alcohol consumption show considerable weaknesses. Using uncorrected estimates, especially self-reported consumption, for

Consumers' attitudes toward consumption of cloned beef. The impact of exposure to technological information about animal cloning.

Science.gov (United States)

Aizaki, Hideo; Sawada, Manabu; Sato, Kazuo

2011-10-01

Novel food technologies, such as cloning, have been introduced into the meat production sector; however, their use is not widely supported by many consumers. This study was designed to assess whether Japanese consumers' attitudes toward consumption of cloned beef (specifically, beef derived from bovine embryo and somatic cell-cloned cattle) would change after they were provided with technological information on animal cloning through a web-based survey. The results revealed that most respondents did not discriminate between their attitudes toward the consumption of the two types of cloned beef, and that most respondents did not change their attitudes toward cloned beef after receiving the technological information. The respondents' individual characteristics, including their knowledge about the food safety of cloned beef and their basic knowledge about animal cloning, influenced the likelihood of a change in their attitudes after they received the information. In conclusion, some consumers might become less uncomfortable about the consumption of cloned beef by the straightforward provision of technological information about animal cloning; however, most consumers are likely to maintain their attitudes. Copyright © 2011 Elsevier Ltd. All rights reserved.

DUV light source sustainability achievements and next steps

Science.gov (United States)

Roman, Yzzer; Cacouris, Ted; Raju, Kumar Raja Guvindan; Kanawade, Dinesh; Gillespie, Walt; Luo, Siqi; Mason, Eric; Manley, David; Das, Saptaparna

2018-03-01

Key sustainability opportunities have been executed in support of corporate initiatives to reduce the environmental footprint and decrease the running cost of DUV light sources. Previously, substantial neon savings were demonstrated over several years through optimized gas management technologies. Beyond this work, Cymer is developing the XLGR 100, a self-contained neon recycling system, to enable minimal gas consumption. The high efficiency results of the XLGR 100 in a production factory are validated in this paper. Cymer has also developed new light source modules with 33% longer life in an effort to reduce raw and associated resource consumption. In addition, a progress report is included regarding the improvements developed to reduce light source energy consumption.

Energy consumption of workstations and external devices in school of business and information technology

OpenAIRE

Koret, Jere

2012-01-01

The purpose of this thesis was to measure energy consumption of workstations and external devices in School of Business and Information Technology and search for possible solutions to reduce electricity consumption. The commissionaire for the thesis was Oulu University of Applied Sciences School of Business and Information Management unit. The reason for the study is that School of Business and Information Management has a environmental plan which is based on ISO standard 14001 and this t...

Developments in broad-beam, ion-source technology and applications

International Nuclear Information System (INIS)

Kaufman, H.R.; Harper, J.M.E.; Cuomo, J.J.

1982-01-01

Recent advances in broad-beam, ion-source technology are summarized, including low-energy ion optics, improved extraction grid fabrication, a compact ion-source design and a gridless ion-source design. Recent applications have emphasized concepts such as stress modification of vapor deposited films, very low energy ion beams to minimize the physical sputtering portion in reactive etching, and the use of multiple sources and targets to sputter deposit alloys and compounds. A comprehensive critical review by the same authors appears concurrently, describing in detail the developments in broad-beam, ion-source technology 1 and the applications of these sources. 2

On the sources of technological change: What do the models assume?

International Nuclear Information System (INIS)

Clarke, Leon; Weyant, John; Edmonds, Jae

2008-01-01

It is widely acknowledged that technological change can substantially reduce the costs of stabilizing atmospheric concentrations of greenhouse gases. This paper discusses the sources of technological change and the representations of these sources in formal models of energy and the environment. The paper distinguishes between three major sources of technological change-R and D, learning-by-doing and spillovers-and introduces a conceptual framework for linking modeling approaches to assumptions about these real-world sources. A selective review of modeling approaches, including those employing exogenous technological change, suggests that most formal models have meaningful real-world interpretations that focus on a subset of possible sources of technological change while downplaying the roles of others

The physics and technology of ion sources

International Nuclear Information System (INIS)

Brown, I.G.

1989-01-01

New applications call for ion beams of unprecedented energy, current, species, focus, uniformity, size, and charge states. This comprehensive, up-to-date review and reference for the rapidly evolving field of ion source technology relates improvements to traditional ion sources and describes the development of the new kinds of ion sources. Also provides background material on the physics of ion sources. Chapters are self-contained, making for easy reference

Sustainable energy consumption and production - a global view

Energy Technology Data Exchange (ETDEWEB)

Hernes, H.

1995-12-31

The paper gives a global view of sustainable energy consumption and production both in developed and developing countries. There is a need of replacing fossil fuel sources with renewable energy at a speed parallel to the depletion of the oil and gas sources. According to the author, the actual growth in developing countries` use of oil, coal and other sources of energy has almost tripled since 1970. Future population growth alone will spur a further 70% jump in energy use in 30 years, even if per capita consumption remains at current levels. For the OECD countries, energy use rose one fifth as much as economic growth between 1973 and 1989. Countries like China and India, and other developing countries, have huge coal reserves and energy needs. Policy makers have to integrate environmental concerns in decision making over the choice between different fuels, energy technologies and stricter environmental standards. Life cycle analyses can contribute to the development of overall indicators of environmental performance of different technologies. According to the IPCC (Intergovernmental Panel on Climate Change), anthropogenic CO{sub 2} emissions must be reduced by more than 60% in order to stabilize the CO{sub 2} concentration in the atmosphere. 8 refs.

Efficient technologies or user behaviour, which is the more important when reducing households' energy consumption?

Energy Technology Data Exchange (ETDEWEB)

Gram-Hanssen, K. [Danish Building Research Institute, Aalborg University, A.C. Meyers Vaenge 15, 2450 Copenhagen (Denmark)

2013-08-15

Much policy effort focuses on energy efficiency of technology, though not only efficiency but also user behaviour is an important factor influencing the amount of consumed energy. This paper explores to what extent energy efficiency of appliances and houses or user behaviour is the more important, both for understanding why some households consume much more energy than others, and when looking for relevant approaches to a future low-carbon society. The paper uses several sources to explore this question, most of them from a Danish context, including results from the researcher's own projects and Danish national statistics. These Danish data are discussed together with international studies. Through the presentation of these different projects and examples, it is shown how user behaviour is at least as important as the efficiency of technology when explaining households' energy consumption in Denmark. In the conclusion, these results are discussed in a broader international perspective and it is concluded that more research in this field is necessary. In relation to energy policy, it is argued that it is not a question of technology efficiency or behaviour, as both have to be included in future policy if energy demand is actually to be reduced. Furthermore, it is also argued that not only individual behaviour is relevant, but also a broader perspective on collectively shared low-carbon practices has to be promoted.

The Share of Renewable Sources in Gross Final Energy Consumption in Croatia in 2014

International Nuclear Information System (INIS)

Kalea, M.

2016-01-01

Eurostat, the statistical agency of the European Union follows the share of renewable energy in gross final energy consumption for many years. The EU Directive 2009/28/EC on renewable energy sources takes as a key indicator of developments in the use of renewable sources of individual member states precisely this indicator. This directive has set the goals of testimony percentage value of the shares that each member state must be achieved by 2020. These are the objectives for each country-member generally different, depending on the starting achieved share (2005), about the possibilities of individual forms of renewable energy and the wealth of individual member states. The goals are set so that in the European Union as a whole in 2020 it reached the share of renewables by 20 percent. Incidentally, Croatia is the default target is also 20 percent, a marginal tasks are 10 percent (for Malta) and 49 percent (for Sweden). At the same time, the Directive sets all member states equal to the target share of energy from renewable sources in the total energy demand for the needs of road transport by 10 percent by 2020. This short work of explanation is very strictly defined way of determining the share of renewable sources in gross final energy consumption, including the data for Croatia in 2014.(author).

Trends in technology, trade and consumption likely to impact on microbial food safety

NARCIS (Netherlands)

Quested, T.E.; Cook, P.E.; Gorris, L.G.M.; Cole, M.B.

2010-01-01

Current and potential future trends in technology, consumption and trade of food that may impact on food-borne disease are analysed and the key driving factors identified focusing on the European Union and, to a lesser extent, accounting for the United States and global issues. Understanding of

Sources of capabilities, integration and technology commercialization

DEFF Research Database (Denmark)

Zahra, Shaker A.; Nielsen, Anders

2002-01-01

In recent years, companies have increased their use of internal and external sources in pursuit of a competitive advantage through the effective and timely commercialization of new technology. Grounded in the resource-based view of the firm, this study examines the effect of a company's use...... of internal and external sources on multiple dimensions of successful technology commercialization (TC). The study also explores the moderating role of formal vs. informal integration mechanisms on these relationships. Applying a longitudinal design and data from 119 companies, the results show that internal...

Power Consumption Optimization in Tooth Gears Processing

Science.gov (United States)

Kanatnikov, N.; Harlamov, G.; Kanatnikova, P.; Pashmentova, A.

2018-01-01

The paper reviews the issue of optimization of technological process of tooth gears production of the power consumption criteria. The authors dwell on the indices used for cutting process estimation by the consumed energy criteria and their applicability in the analysis of the toothed wheel production process. The inventors proposed a method for optimization of power consumptions based on the spatial modeling of cutting pattern. The article is aimed at solving the problem of effective source management in order to achieve economical and ecological effect during the mechanical processing of toothed gears. The research was supported by Russian Science Foundation (project No. 17-79-10316).

Source zone remediation by zero valent iron technologies

DEFF Research Database (Denmark)

Fjordbøge, Annika Sidelmann

at a fifth of these contaminated sites. These source zones pose a serious threat to soil and groundwater quality. Remediation of the heterogeneous source zones is challenging due to irregular downwards migration patterns in the subsurface, low aqueous solubility and matrix diffusion. To protect the soil...... and groundwater resources from long-term deterioration, the development of in situ technologies suitable for remediation of DNAPL is warranted. Currently, an array of aggressive in situ remediation technologies remediation exists. These technologies may be suitable under various site specific conditions; however......, most of them are limited by subsurface heterogeneities and/or the risk of inadvertent DNAPL displacement during field application. This thesis presents the results of an investigation of the potential for remediation of chlorinated solvent source zones by emerging zero valent iron (ZVI) based...

Smart City Energy Interconnection Technology Framework Preliminary Research

Science.gov (United States)

Zheng, Guotai; Zhao, Baoguo; Zhao, Xin; Li, Hao; Huo, Xianxu; Li, Wen; Xia, Yu

2018-01-01

to improve urban energy efficiency, improve the absorptive ratio of new energy resources and renewable energy sources, and reduce environmental pollution and other energy supply and consumption technology framework matched with future energy restriction conditions and applied technology level are required to be studied. Relative to traditional energy supply system, advanced information technology-based “Energy Internet” technical framework may give play to energy integrated application and load side interactive technology advantages, as a whole optimize energy supply and consumption and improve the overall utilization efficiency of energy.

The world energy consumption in 2005

International Nuclear Information System (INIS)

Lapillonne, B.

2006-01-01

Based on Enerdata 2005 data, this analysis presents the situation of the world energy consumption in 2005, the electric power consumption per region and production per source, the consumption increase for each energy source and the petroleum and gas consumption increase. (A.L.B.)

Ultrashort pulse laser technology laser sources and applications

CERN Document Server

Schrempel, Frank; Dausinger, Friedrich

2016-01-01

Ultrashort laser pulses with durations in the femtosecond range up to a few picoseconds provide a unique method for precise materials processing or medical applications. Paired with the recent developments in ultrashort pulse lasers, this technology is finding its way into various application fields. The book gives a comprehensive overview of the principles and applications of ultrashort pulse lasers, especially applied to medicine and production technology. Recent advances in laser technology are discussed in detail. This covers the development of reliable and cheap low power laser sources as well as high average power ultrashort pulse lasers for large scale manufacturing. The fundamentals of laser-matter-interaction as well as processing strategies and the required system technology are discussed for these laser sources with respect to precise materials processing. Finally, different applications within medicine, measurement technology or materials processing are highlighted.

The Determination of Load Profiles and Power Consumptions of Home Appliances

Directory of Open Access Journals (Sweden)

Fatih Issi

2018-03-01

Full Text Available In recent years, the increment of distributed electricity generation based on renewable energy sources and improvement of communication technologies have caused the development of next-generation power grids known as smart grids. The structures of smart grids have bidirectional communication capability and enable the connection of energy generated from distributed sources to any point on the grid. They also support consumers in energy efficiency by creating opportunities for management of power consumption. The information on power consumption and load profiles of home appliances is essential to perform load management in the dwelling accurately. In this study, the power consumption data for all the basic home appliances, utilized in a two-person family in Çankırı, Turkey, was obtained with high resolution in one-second intervals. The detailed power consumption analysis and load profile were executed for each home appliance. The obtained data is not only the average power consumption of each appliance but also characterizes different operating modes or their cycles. In addition, the impact of these devices on home energy management studies and their standby power consumptions were also discussed. The acquired data is an important source to determine the load profile of individual home appliances precisely in home energy management studies. Although the results of this study do not completely reflect the energy consumption behavior of the people who live in this region, they can reveal the trends in load demands based on a real sample and customer consumption behavior of a typical two-person family.

Impact of idling on fuel consumption and exhaust emissions and available idle-reduction technologies for diesel vehicles – A review

International Nuclear Information System (INIS)

Rahman, S.M. Ashrafur; Masjuki, H.H.; Kalam, M.A.; Abedin, M.J.; Sanjid, A.; Sajjad, H.

2013-01-01

Highlights: • In this paper we reviewed the impact of diesel vehicles idling on fuel consumption and exhaust emission. • Fuel consumption and emissions during idling are very high compared to driving cycle. • The effects of various operating on fuel consumption and exhaust emission were discussed. • Available idle-reduction technologies impact on idling fuel consumption and emissions were discussed. • Idling reduction technologies reduce fuel consumption and emissions significantly. - Abstract: In order to maintain cab comfort truck drivers have to idle their engine to obtain the required power for accessories, such as the air conditioner, heater, television, refrigerator, and lights. This idling of the engine has a major impact on its fuel consumption and exhaust emission. Idling emissions can be as high as 86.4 g/h, 16,500 g/h, 5130 g/h, 4 g/h, and 375 g/h for HC, CO 2 , CO, PM, and NOx, respectively. Idling fuel consumption rate can be as high as 1.85 gal/h. The accessory loading, truck model, fuel-injection system, ambient temperature, idling speed, etc., also affect significantly the emission levels and fuel consumption rate. An increase in accessory loading and ambient temperature increases the emissions and fuel consumption. During idling, electronic fuel-injection systems reduce HC, PM, and CO emission, but increase NOx emissions compared with a mechanical fuel-injection system. An increase of idling speed increases fuel consumption rate. There are many systems available on the market to reduce engine idling and improve air quality and fuel consumption rate, such as an auxiliary power unit (APU), truck stop electrification, thermal storage systems, fuel cells, and direct fire heaters. A direct fire heater reduces fuel consumption by 94–96% and an APU reduces consumption by 60–87%. Furthermore, these technologies increase air quality significantly by reducing idling emissions, which is the reason why they are considered as key alternatives to

New energy efficiency technologies associated with increased natural gas demand in delivery and consumption sectors of Iran

Energy Technology Data Exchange (ETDEWEB)

Alghalandis, Saeid Mansouri

2010-09-15

Increasing population and economic growth in developing countries has changed their energy consumption patterns. So, the conventional systems of energy supply have become inadequate to deal with rising energy demand. Iran has great reservoirs of natural gas and its natural gas usage is far more than average international standard. Dominance of natural gas share in energy basket in Iran, make it necessary to consider energy efficient technologies and solutions for this domain. In this study new technologies for increasing energy efficiency (EE) in natural gas delivery and consumption sub sectors are discussed and evaluated according to available infrastructures in Iran.

Data for the analysis of non-energetic consumption under greenhouse gas aspects. Final report

International Nuclear Information System (INIS)

Patel, M.; Jochem, E.; Marscheider-Weidemann, F.; Radgen, P.; Brandt, U.; Luellau, A.; Marquardt, J.; Sutter, J.

1996-06-01

Non-energetic consumption is the consumption in non-energy-related terms of energy sources as listed in the national energy statistics /VDI 4600/, i.e., essentially fossil primary and secondary energy sources such as natural gas, naphtha and fuel oil. These energy sources are present in converted form mainly in plastic products, chemical fibres, paints and varnishes as well as in lubricants, fertilizers and bitumen. Because of the non-negligible share of non-energetic consumption in total emissions of climate-relevant substances and the foreseeable long-term accumulation of a carbon dioxide emission potential in long-lived products and in landfills, the investigation pursues the following aim: to make, by means of highly differentiated input-output tables, a technologically differentiated life cycle analysis including production, external trade, phase of use, and waste treatment for the years 1989, 2005, and 2020. (orig./UA)

Dietary fiber sources consumption and overweight among Polish male students. A cross-sectional study

Science.gov (United States)

Krusińska, Beata; Wuenstel, Justyna Weronika; Kowalkowska, Joanna; Wądołowska, Lidia; Słowińska, Małgorzata Anna

There has been an increase in the prevalence of overweight and obesity in adolescents and young adults, especially in men than women. Many adolescents have a sedentary lifestyle and consume more processed, low-fiber foods. The aim of this study was to assess the frequency of fiber intake and its selected dietary source consumption in relation to the overweight among Polish male students. This cross-sectional study involved 1,233 male students aged 13.0-24.9 years from northern, eastern and central Poland. The respondents completed a self-administered Block Screening Questionnaire for Fruit/Vegetable/Fiber Intake and measurements of their body mass and height were performed. The overweight and obesity prevalence was assessed using international standards. The most frequently consumed foods by students included: white bread and potatoes, fruit and fruit or vegetable juices. The odds of overweight (including obesity) were lower from 28% (OR=0.72; 95%CI:0.56-0.93) to 31% (OR=0.69; 95%CI:0.50-0.95) with a daily consumption of white bread compared to non-daily consumption of white bread. Consumption ≥4 times/week of prepared vegetables (cooked, preserved or marinated) was associated with 51% lower odds of overweight (OR=0.49; 95%CI:0.27-0.97) compared to consumption less than 4 times/week of these foods. The odds of overweight for the level of fiber intake was insignificant. This study provides surprising insights regarding high-fiber and low-fiber food consumption and overweight in Polish male students. A lower odds of overweight was associated with a higher frequency consumption of relatively low in fiber foods as white bread and cooked, preserved or marinated vegetables. Most of the students consumed fiber at an unacceptable level, so a beneficial impact of high-fiber foods on overweight prevalence was not shown.

Household dietary diversity and Animal Source Food consumption in Ethiopia: evidence from the 2011 Welfare Monitoring Survey.

Science.gov (United States)

Workicho, Abdulhalik; Belachew, Tefera; Feyissa, Garumma Tolu; Wondafrash, Beyene; Lachat, Carl; Verstraeten, Roosmarijn; Kolsteren, Patrick

2016-11-25

It is imperative to track dietary quality and progress in nutritional outcomes in a population to develop timely interventions. Dietary diversity is a commonly used proxy to assess dietary quality in low-income countries. This study identified predictors of household dietary diversity in Ethiopia and pattern of consumption of animal source food (ASF) among households. Secondary data were analyzed from the 2011 Ethiopian Welfare Monitoring Survey (WMS). This survey used a structured questionnaire to collect socio-demographic and economic data. Dietary data were collected using a dietary diversity questionnaire measuring dietary diversity over the past 1 week. A Household Dietary Diversity Score (HDDS) was constructed according to the Food and Agricultural Organization (FAO) guidelines. Consumption of ASFs is described by its distribution among the regions and by HDDS. Multiple logistic regression analysis was fitted to identify independent predictors for HDDS. A total of 27,995 households were included in the analyses. A little over half of the study households (52.2%) had more than four household members, and 75% of households were male headed. The mean HHDS was five food groups. Cereals were the most commonly (96%) consumed food groups. Fish, egg and fruits, on the other hand, were the least consumed food groups. ASFs were consumed in greater proportion among households with higher HDDS. Being part of the higher and middle socio economic strata (P < 0.001), literacy (P < 0.01), urban residence (P < 0.01), male headed household (P < 0.01), larger family size (P <0.01) and owning livestock (P < 0.01) were positively associated with higher HDDS. Considering these findings, nutrition sensitive interventions which address the problem through economic and educational empowerment and modern technologies supporting agricultural practices need to be designed to increase both local production and increased consumption.

Fuel Consumption Management in the Transportation Sector in Iran

DEFF Research Database (Denmark)

Dastjerdi, Aliasghar M.; Araghi, Bahar Namaki

2011-01-01

Energy consumption in the transportation sector in Iran is significantly higher than global norms and standards which caused some issues including wasting national resources, deteriorating air quality, GHG emissions etc. The major purpose of this paper is to introduce practical policies, strategies...... and technologies to reduce liquid fuel consumption known as a dominant source of energy in transport sector in Iran. Since, the road subsector has the major share in consuming liquid fuel amongst others, more attention is given to the methods for reducing consumption in this subsector. The relating policies...... and actions were classified by optimization measures according to four separate categories as follows; “Optimization of Supply of Transportation Services”, “Optimization of Transport Demand”, “Optimization of Energy Consumption” and “Optimization of Car Manufacturing”....

Potassium consumption by rice plant from different sources under salt stress

International Nuclear Information System (INIS)

Zaman, B.U.; Ali, A.; Mahmood, I.A.; Arshadullah, M.

2010-01-01

The study on usage of K+ by two rice cultivars (Cv. Shaheen and KS-282) from KNO/sub 3/, KH/sub 2/PO/sub 4/ and K/sub 2/SO/sub 4/ (5 mM each), with 60 mM NaCI under hydroponics conditions, showed that fresh mass of shoot (FMS), fresh mass of root (FMR), root/ shoot ratio of fresh and dry mass, relative water contents (RWC) and relative growth rate (RGR) were affected significantly (P=0.01) inconsistent relating to K+ sources under salt stress. The intake of K+ was the highest with application of KH/sub 2/PO/sub 4/ than KNO) and K/sub 2/SO/sub 4/ application. The transport of K+ was the highest with KH/sub 2/PO. than KNO) and K/sub 2/SO/sub 4/ application in Shaheen, whereas in var. KS-282 with K/sub 2/SO/sub 4/. transport of K+ was higher than the other two sources. The utilisation of K+ was higher with KNO) than KH/sub 2/PO/sub 4/ and K/sub 2/SO/sub 4/ application in Shaheen, whereas in KS-282, K+ utilisation with KH/sub 2/PO/sub 4/. was higher than the other two sources. It was inferred that K+ consumption in shoot and root system of rice was dependent physio-genetically on potassium sources. (author)

Energy technology sources, systems and frontier conversion

CERN Document Server

Ohta, Tokio

1994-01-01

This book provides a concise and technical overview of energy technology: the sources of energy, energy systems and frontier conversion. As well as serving as a basic reference book for professional scientists and students of energy, it is intended for scientists and policy makers in other disciplines (including practising engineers, biologists, physicists, economists and managers in energy related industries) who need an up-to-date and authoritative guide to the field of energy technology.Energy systems and their elemental technologies are introduced and evaluated from the view point

Optical technologies for extreme-ultraviolet and soft X-ray coherent sources

International Nuclear Information System (INIS)

Canova, Federico; Poletto, Luca

2015-01-01

The book reviews the most recent achievements in optical technologies for XUV and X-ray coherent sources. Particular attention is given to free-electron-laser facilities, but also to other sources available at present, such as synchrotrons, high-order laser harmonics and X-ray lasers. The optical technologies relevant to each type of source are discussed. In addition, the main technologies used for photon handling and conditioning, namely multilayer mirrors, adaptive optics, crystals and gratings are explained. Experiments using coherent light received during the last decades a lot of attention for the X-ray regime. Strong efforts were taken for the realization of almost fully coherent sources, e.g. the free-electron lasers, both as independent sources in the femtosecond and attosecond regimes and as seeding sources for free-electron-lasers and X-ray gas lasers. In parallel to the development of sources, optical technologies for photon handling and conditioning of such coherent and intense X-ray beams advanced. New problems were faced for the realization of optical components of beamlines demanding to manage coherent X-ray photons, e.g. the preservation of coherence and time structure of ultra short pulses.

Sustainable Consumption

DEFF Research Database (Denmark)

Røpke, Inge

2015-01-01

The intention of this chapter is to explore the role of consumption and consumers in relation to sustainability transition processes and wider systemic transformations. In contrast to the individualistic focus in much research on sustainable consumption, the embeddedness of consumption activities...... in wider social, economic and technological frameworks is emphasised. In particular, the chapter is inspired by practice theory and transition theory. First, various trends in consumption are outlined to highlight some of the challenges for sustainability transitions. Then, it is discussed how consumption...... patterns are shaped over time and what should be considered in sustainability strategies. While discussions on consumption often take their point of departure in the perspective of the individual and then zoom to the wider context, the present approach is the opposite. The outline starts with the basic...

Curious exceptions? : open source software and "open" technology

NARCIS (Netherlands)

Nuvolari, A.; Rullani, F.; St. Amant, Kirk; Still, Brian

2007-01-01

The aim of thts chapter is to explore the differences and commonalities between open source software and other cases of open technology. The concept of open technology is used here to indicate various models of innovation based on the participation of a wide range of different actors who freely

Water consumption in the production of ethanol and petroleum gasoline.

Science.gov (United States)

Wu, May; Mintz, Marianne; Wang, Michael; Arora, Salil

2009-11-01

We assessed current water consumption during liquid fuel production, evaluating major steps of fuel lifecycle for five fuel pathways: bioethanol from corn, bioethanol from cellulosic feedstocks, gasoline from U.S. conventional crude obtained from onshore wells, gasoline from Saudi Arabian crude, and gasoline from Canadian oil sands. Our analysis revealed that the amount of irrigation water used to grow biofuel feedstocks varies significantly from one region to another and that water consumption for biofuel production varies with processing technology. In oil exploration and production, water consumption depends on the source and location of crude, the recovery technology, and the amount of produced water re-injected for oil recovery. Our results also indicate that crop irrigation is the most important factor determining water consumption in the production of corn ethanol. Nearly 70% of U.S. corn used for ethanol is produced in regions where 10-17 liters of water are consumed to produce one liter of ethanol. Ethanol production plants are less water intensive and there is a downward trend in water consumption. Water requirements for switchgrass ethanol production vary from 1.9 to 9.8 liters for each liter of ethanol produced. We found that water is consumed at a rate of 2.8-6.6 liters for each liter of gasoline produced for more than 90% of crude oil obtained from conventional onshore sources in the U.S. and more than half of crude oil imported from Saudi Arabia. For more than 55% of crude oil from Canadian oil sands, about 5.2 liters of water are consumed for each liter of gasoline produced. Our analysis highlighted the vital importance of water management during the feedstock production and conversion stage of the fuel lifecycle.

Water Consumption in the Production of Ethanol and Petroleum Gasoline

Science.gov (United States)

Wu, May; Mintz, Marianne; Wang, Michael; Arora, Salil

2009-11-01

We assessed current water consumption during liquid fuel production, evaluating major steps of fuel lifecycle for five fuel pathways: bioethanol from corn, bioethanol from cellulosic feedstocks, gasoline from U.S. conventional crude obtained from onshore wells, gasoline from Saudi Arabian crude, and gasoline from Canadian oil sands. Our analysis revealed that the amount of irrigation water used to grow biofuel feedstocks varies significantly from one region to another and that water consumption for biofuel production varies with processing technology. In oil exploration and production, water consumption depends on the source and location of crude, the recovery technology, and the amount of produced water re-injected for oil recovery. Our results also indicate that crop irrigation is the most important factor determining water consumption in the production of corn ethanol. Nearly 70% of U.S. corn used for ethanol is produced in regions where 10-17 liters of water are consumed to produce one liter of ethanol. Ethanol production plants are less water intensive and there is a downward trend in water consumption. Water requirements for switchgrass ethanol production vary from 1.9 to 9.8 liters for each liter of ethanol produced. We found that water is consumed at a rate of 2.8-6.6 liters for each liter of gasoline produced for more than 90% of crude oil obtained from conventional onshore sources in the U.S. and more than half of crude oil imported from Saudi Arabia. For more than 55% of crude oil from Canadian oil sands, about 5.2 liters of water are consumed for each liter of gasoline produced. Our analysis highlighted the vital importance of water management during the feedstock production and conversion stage of the fuel lifecycle.

Understanding energy consumption: Beyond technology and economics

Energy Technology Data Exchange (ETDEWEB)

Wilhite, H.; Shove, E.

1998-07-01

This paper summarizes two years of efforts among a cross-disciplinary group of senior researchers to bring social and cultural perspectives to modeling of household energy consumption. The work has been organized by the Center for Energy Studies of the University of Geneva. The researchers represent both the physical and social sciences, several institutions and a number of countries. The initiative was based on an acknowledgement of the failure of technical and economic models to explain consumption or more importantly, how consumption patterns change. Technical and economic models most often either ignore social and cultural issues or reduce them to parameters of other variables. An important objective for the Geneva Group has been to engage modelers and social scientists in a dialogue which brings social and cultural context to the fore. The process reveals interesting insights into the frictions of cross-disciplinary interaction and the emergence of new perspectives. Various classical modeling approaches have been discussed and rejected. Gradually, a framework has emerged which says something about the appropriate institutions and actors which contribute to consumption patterns; about how they are related; and finally about how the interinstitutional relationships and the consumption patterns themselves change. A key point of convergence is that a complete understanding of energy end-use will not be possible from an analysis directed at the point of end use alone. The analysis must incorporate what happens inside institutions like manufacturers, retailers, and public policy organizations as well as how those organizations interact with consumers, including media and advertising. Progress towards a better understanding of energy consumption requires a greater engagement of social scientists with these heretofore little explored actors an relationships.

Coupling model of energy consumption with changes in environmental utility

International Nuclear Information System (INIS)

He Hongming; Jim, C.Y.

2012-01-01

This study explores the relationships between metropolis energy consumption and environmental utility changes by a proposed Environmental Utility of Energy Consumption (EUEC) model. Based on the dynamic equilibrium of input–output economics theory, it considers three simulation scenarios: fixed-technology, technological-innovation, and green-building effect. It is applied to analyse Hong Kong in 1980–2007. Continual increase in energy consumption with rapid economic growth degraded environmental utility. First, energy consumption at fixed-technology was determined by economic outcome. In 1990, it reached a critical balanced state when energy consumption was 22×10 9 kWh. Before 1990 (x 1 9 kWh), rise in energy consumption improved both economic development and environmental utility. After 1990 (x 1 >22×10 9 kWh), expansion of energy consumption facilitated socio-economic development but suppressed environmental benefits. Second, technological-innovation strongly influenced energy demand and improved environmental benefits. The balanced state remained in 1999 when energy consumption reached 32.33×10 9 kWh. Technological-innovation dampened energy consumption by 12.99%, exceeding the fixed-technology condition. Finally, green buildings reduced energy consumption by an average of 17.5% in 1990–2007. They contributed significantly to energy saving, and buffered temperature fluctuations between external and internal environment. The case investigations verified the efficiency of the EUEC model, which can effectively evaluate the interplay of energy consumption and environmental quality. - Highlights: ► We explore relationships between metropolis energy consumption and environmental utility. ► An Environmental Utility of Energy Consumption (EUEC) model is proposed. ► Technological innovation mitigates energy consumption impacts on environmental quality. ► Technological innovation decreases demand of energy consumption more than fixed technology scenario

Source technology as the foundation for modern infra-red counter measures (IRCM)

Science.gov (United States)

Grasso, Robert J.

2010-10-01

Protection of military aircraft from IR guided threats is paramount to ensure the survivability of aircrews, platforms, and to ensure mission success. At the foundation of all IRCM systems is the source; that component that provides the in-band radiant energy required for threat defeat. As such, source technology has evolved with IRCM technology to encompass the evolving systems architectures that encompass IRCM: 1) "Hot Brick" omni-directional sources; 2) arc lamps, and; 3) lasers. Lasers, as IRCM sources continue to evolve to meet the challenges of ever-evolving threats, superior techniques, economy of installation, and superior source technology. Lasers represent the single greatest advance in IRCM source technology and continue to evolve to meet ever more sophisticated threats. And have been used with great effect in all modern IRCM systems; evolving from frequency doubled CO2 lasers, to solid state lasers with OPOs, to semiconductor lasers including Quantum Cascade Lasers (QCLs); these last devices represent the latest advance in IRCM source technology offering all-band coverage, architectural simplicity, and economy of scale. While QCLs represent the latest advance in IRCM laser technology, fiber lasers show much promise in addressing multi-band operation as well as the ability to be coherently combined to achieve even greater output capability. Also, ultra-short pulse lasers are evolving to become practical for IRCM applications. Stay tuned ......

[Television and Internet as sources of women knowledge of tobacco smoking, alcohol consumption and energy drinks impact on health].

Science.gov (United States)

Strycharz-Dudziak, Małgorzata; Nakonieczna-Rudnicka, Marta; Bachanek, Teresa; Kobyłecka, Elżbieta

2014-01-01

Accessibility of the Internet allows obtaining information on different areas of life, including the impact of smoking, alcohol consumption and energy drinks on health. Environmental exposure to tobacco smoke and active smoking are a serious risk for women's health, especially for women in reproductive age and children at any time in their lives. Alcohol is a risk factor for the development of general diseases, and consumed by pregnant women has a toxic effect on the body of women and a child in the prenatal period. Due to the increased consumption of energy drinks containing among others nervous system stimulants and carbohydrates, their consumption should be a conscious choice of the consumers. Knowledge of the health risks resulting from the lifestyle can be a decisive factor for the implementation of health behaviour. The aim of the study was to determine the sources from which men and women acquire information concerning the effects of cigarette smoking, alcohol consumption and energy drinks on health. The respondents interest in the above mentioned subjects was also evaluated. The survey study was carried out in a group of 160 persons (114 women and 46 men), aged 19-60 years, randomly selected from the patients presenting to the Department of Conservative Dentistry with Endodontics of the Medical University of Lublin. An author's questionnaire was prepared for this research. The data were analyzed statistically with the use of Pearson's X2 test. Statistically significant test values were those with psource of information about the impact of smoking cigarettes on health for 52.63% women and 56.52% men, about the alcohol effect on health for 57.02% women and 45.65% men, while about energy drinks for 61.40 % of women and 47.83% men. Differences between sex of the respondents and indicated source of information were not statistically significant. Obtaining information from television programmes on the impact of smoking on health reported 70.18% of women and 63

Consumption of added sugars among US children and adults by food purchase location and food source.

Science.gov (United States)

Drewnowski, Adam; Rehm, Colin D

2014-09-01

The proposed changes to the Nutrition Facts Label by the US Food and Drug Administration will include information on added sugars for the first time. The objective was to evaluate the sources of added sugars in the diets of a representative sample of US children and adults by food purchase location and food source (eg, food group). This cross-sectional study among 31,035 children, adolescents, and adults aged ≥6 y from the 2003-2004, 2005-2006, 2007-2008, and 2009-2010 NHANES used data from a 24-h dietary recall to evaluate consumption of added sugars. Food locations of origin were identified as stores (supermarket or grocery store), quick-service restaurants/pizza (QSRs), full-service restaurants (FSRs), schools, and others (eg, vending machines or gifts). Added sugars consumption by food purchase location was evaluated by age, family income-to-poverty ratio, and race-ethnicity. Food group sources of added sugars were identified by using the National Cancer Institute food categories. Added sugars accounted for ∼14.1% of total dietary energy. Between 65% and 76% of added sugars came from stores, 6% and 12% from QSRs, and 4% and 6% from FSRs, depending on age. Older adults (aged ≥51 y) obtained a significantly greater proportion of added sugars from stores than did younger adults. Lower-income adults obtained a significantly greater proportion of added sugars from stores than did higher-income adults. Intake of added sugars did not vary by family income among children/adolescents. Soda and energy and sports drinks were the largest food group sources of added sugars (34.4%), followed by grain desserts (12.7%), fruit drinks (8.0%), candy (6.7%), and dairy desserts (5.6%). Most added sugars came from foods obtained from stores. The proposed changes to the Nutrition Facts Label should capture the bulk of added sugars in the US food supply, which suggests that the recommended changes have the potential to reduce added sugars consumption. © 2014 American Society

Industrial applications of radiotracer and sealed source technology promoted by IAEA

International Nuclear Information System (INIS)

Joon-Ha Jin; Thereska, J.

2004-01-01

Great technical and economical benefits can be obtained by applying radioisotope technologies to various industries. The International Atomic Energy Agency (IAEA) has contributed to the development of radiotracer and sealed source technology as applied to industry and environment through coordinated research projects (CRPs). The mature and competitive techniques have been transferred and implemented to developing countries through the Agency's technical co-operation (TC) projects. The paper presents the main achievements in radiotracer and sealed source technology promoted by IAEA as well as the perspective of the technology transfer to developing countries. (author)

Technology consumption and cognitive control: Contrasting action video game experience with media multitasking.

Science.gov (United States)

Cardoso-Leite, Pedro; Kludt, Rachel; Vignola, Gianluca; Ma, Wei Ji; Green, C Shawn; Bavelier, Daphne

2016-01-01

Technology has the potential to impact cognition in many ways. Here we contrast two forms of technology usage: (1) media multitasking (i.e., the simultaneous consumption of multiple streams of media, such a texting while watching TV) and (2) playing action video games (a particular subtype of video games). Previous work has outlined an association between high levels of media multitasking and specific deficits in handling distracting information, whereas playing action video games has been associated with enhanced attentional control. Because these two factors are linked with reasonably opposing effects, failing to take them jointly into account may result in inappropriate conclusions as to the impacts of technology use on attention. Across four tasks (AX-continuous performance, N-back, task-switching, and filter tasks), testing different aspects of attention and cognition, we showed that heavy media multitaskers perform worse than light media multitaskers. Contrary to previous reports, though, the performance deficit was not specifically tied to distractors, but was instead more global in nature. Interestingly, participants with intermediate levels of media multitasking sometimes performed better than both light and heavy media multitaskers, suggesting that the effects of increasing media multitasking are not monotonic. Action video game players, as expected, outperformed non-video-game players on all tasks. However, surprisingly, this was true only for participants with intermediate levels of media multitasking, suggesting that playing action video games does not protect against the deleterious effect of heavy media multitasking. Taken together, these findings show that media consumption can have complex and counterintuitive effects on attentional control.

Asymptotically approaching the past: historiography and critical use of sources in art technological source research

NARCIS (Netherlands)

Clarke, M.; Kroustallis, S.; Townsend, J.H.; Cenalmor Bruquetas, E.; Stijnman, A.; San Andres Moya, M.

2008-01-01

This paper proposes that historiographic methods should be applied during art technological source research. Sources cannot always be used uncritically as being simply reliable records of contemporary workshop practice. The accuracy, date and origin of the technical information embedded within

Small compact pulsed electron source for radiation technologies

International Nuclear Information System (INIS)

Korenev, Sergey

2002-01-01

The small compact pulsed electron source for radiation technologies is considered in the report. The electron source consists of pulsed high voltage Marx generator and vacuum diode with explosive emission cathode. The main parameters of electron source are next: kinetic energy is 100-150 keV, beam current is 5-200 A and pulse duration is 100-400 nsec. The distribution of absorbed doses in irradiated materials is considered. The physical feasibility of pulsed low energy electron beam for applications is considered

Effects of Different Carbon Sources on Growth, Membrane Permeability, β-Sitosterol Consumption, Androstadienedione and Androstenedione Production by Mycobacterium neoaurum.

Science.gov (United States)

Yin, Yanli

2016-03-01

Effects of different carbon sources on growth, membrane permeability, β-sitosterol consumption, androstadienedione and androstenedione (AD(D)) production by Mycobacterium neoaurum were investigated. The results indicated that glucose was advantageous to the growth and resulted in the adverse effects on the phytosterols consumption and AD(D) production compared to the results of propanol and isopropanol as sole carbon source. The cell wall widths of 9.76 by propanol and 8.00 nm by isopropanol were 38.3 and 49.4 % thinner than that of 15.82 nm by glucose, respectively. The partition coefficient of the cell grown in propanol and isopropanol was 18.1 and 22.2, which were 7.23- and 9.09-fold higher than that of the cell grown in glucose.

Open Source Cloud-Based Technologies for Bim

Science.gov (United States)

Logothetis, S.; Karachaliou, E.; Valari, E.; Stylianidis, E.

2018-05-01

This paper presents a Cloud-based open source system for storing and processing data from a 3D survey approach. More specifically, we provide an online service for viewing, storing and analysing BIM. Cloud technologies were used to develop a web interface as a BIM data centre, which can handle large BIM data using a server. The server can be accessed by many users through various electronic devices anytime and anywhere so they can view online 3D models using browsers. Nowadays, the Cloud computing is engaged progressively in facilitating BIM-based collaboration between the multiple stakeholders and disciplinary groups for complicated Architectural, Engineering and Construction (AEC) projects. Besides, the development of Open Source Software (OSS) has been rapidly growing and their use tends to be united. Although BIM and Cloud technologies are extensively known and used, there is a lack of integrated open source Cloud-based platforms able to support all stages of BIM processes. The present research aims to create an open source Cloud-based BIM system that is able to handle geospatial data. In this effort, only open source tools will be used; from the starting point of creating the 3D model with FreeCAD to its online presentation through BIMserver. Python plug-ins will be developed to link the two software which will be distributed and freely available to a large community of professional for their use. The research work will be completed by benchmarking four Cloud-based BIM systems: Autodesk BIM 360, BIMserver, Graphisoft BIMcloud and Onuma System, which present remarkable results.

OPEN SOURCE CLOUD-BASED TECHNOLOGIES FOR BIM

Directory of Open Access Journals (Sweden)

S. Logothetis

2018-05-01

Full Text Available This paper presents a Cloud-based open source system for storing and processing data from a 3D survey approach. More specifically, we provide an online service for viewing, storing and analysing BIM. Cloud technologies were used to develop a web interface as a BIM data centre, which can handle large BIM data using a server. The server can be accessed by many users through various electronic devices anytime and anywhere so they can view online 3D models using browsers. Nowadays, the Cloud computing is engaged progressively in facilitating BIM-based collaboration between the multiple stakeholders and disciplinary groups for complicated Architectural, Engineering and Construction (AEC projects. Besides, the development of Open Source Software (OSS has been rapidly growing and their use tends to be united. Although BIM and Cloud technologies are extensively known and used, there is a lack of integrated open source Cloud-based platforms able to support all stages of BIM processes. The present research aims to create an open source Cloud-based BIM system that is able to handle geospatial data. In this effort, only open source tools will be used; from the starting point of creating the 3D model with FreeCAD to its online presentation through BIMserver. Python plug-ins will be developed to link the two software which will be distributed and freely available to a large community of professional for their use. The research work will be completed by benchmarking four Cloud-based BIM systems: Autodesk BIM 360, BIMserver, Graphisoft BIMcloud and Onuma System, which present remarkable results.

Efficient technologies or user behaviour, which is the more important when reducing households' energy consumption?

DEFF Research Database (Denmark)

Gram-Hanssen, Kirsten

2013-01-01

Much policy effort focuses on energy efficiency of technology, though not only efficiency but also user behaviour is an important factor influencing the amount of consumed energy. This paper explores to what extent energy efficiency of appliances and houses or user behaviour is the more important...... and Danish national statistics. These Danish data are discussed together with international studies. Through the presentation of these different projects and examples, it is shown how user behaviour is at least as important as the efficiency of technology when explaining households' energy consumption...

Accelerating discovery with open-source technology at eLife

OpenAIRE

Penfold, Naomi

2017-01-01

Accelerating discovery with open-source technology. Talks presented May 2017.Files can be found at https://github.com/npscience/eLife-innovation-May2017-presentation.These slides are derived from a deck shared by Jennifer McLennan. All other sources acknowledged throughout the presentation.

Discussion on application of water source heat pump technology to uranium mines

International Nuclear Information System (INIS)

An Qiang

2011-01-01

Application of water source heat pump units in recovering waste heat from uranium mines is discussed, and several forms of waste heat recovery are introduced. The problems in the application of water source heat pump technology are analyzed. Analysis results show that the water source heat pump technology has broad application prospects in uranium mines, and it is a way to exchange existing structure of heat and cold sources in uranium mines. (authors)

Conditioning technology of spent radium sources

International Nuclear Information System (INIS)

Kang, Il Sik; Kim, K. J.; Jang, K. D.

2001-03-01

In order to avoid accidents that could be resulted from improper storage of spent radium sources, it is necessary to condition and store them safely. The program for safe conditioning of spent radium sources by IAEA has been established to assist the developing countries. The main object of this report is to understand well and apply the technology that was applied in conditioning the national inventory of Ra-226 sources in Myanmar, as a part of IAEA's project by the Korean expert team. The report is the result that the Korean expert team carried out in Myanmar under the project title 'Radium Conditioning Service in Myanmar(INT4131-06646C)'. As a result of the mission, a whole inventory, 1,429.5 mCi of spent radium sources was safely conditioned by the Korean expert team according to the manual under the supervision of IAEA's technical officer, Mr. Al-Mughrabi, and under the control of DAE authority. These sources were encapsuled in 27 small capsules and 3 large capsules, and conditioned in 3 lead shields, producing 3 packages. The inventories were distributed into 3 shielding devices, holding 500, 459.5, and 470 mCi

Firewood consumption pattern of different tribal communities in Northeast India

International Nuclear Information System (INIS)

Bhatt, B.P.; Sachan, M.S.

2004-01-01

Excessive use of firewood, as a primary source of energy for domestic purposes, is leading to severe deforestation in the northeastern Himalayan region. Firewood consumption pattern of three tribal communities of Meghalaya, India- Garo, Khasi and Jaintia was studied under varying ecological, socio-economic and socio-cultural conditions. Fuelwood consumption was highest to Khasi community (5.81 kg/capita/day), followed by the Garo (5.32 kg/capita/day) and Jaintia (3.90 kg/capita/day), respectively, irrespective of their socio-economic status. The labour energy expenditure for fuelwood collection was highest for the Jaintia (88.56 MJ/capita/yr) and minimum to Garo (70.64 MJ/capita/yr). The fuelwood is burnt for various activities such as cooking, water heating, space heating, lighting and livestock rearing, etc. Among various activities, cooking required maximum energy. Commercial fuel is beyond the reach of the tribal communities due to their poor socio-economic conditions. The estimated growing stock is unable to sustain the rate of fuel consumption. This information could be utilized for developing appropriate technology for afforestation programmes in this region since 90% of the total population use biomass as an important source of energy

Synchrotron light sources: A powerful tool for science and technology

International Nuclear Information System (INIS)

Schlachter, F.; Robinson, A.

1996-01-01

A new generation of synchrotron light sources is producing extremely bright beams of vacuum-ultraviolet and x-ray radiation, poweful new tools for research in a wide variety of basic and applied sciences. Spectromicroscopy using high spectral and spatial resolution is a new way of seeing, offering many opportunities in the study of matter. Development of a new light source provides the country or region of the world in which the light source is located many new opportunities: a focal point for research in many scientific and technological areas, a means of upgrading the technology infrastructure of the country, a means of training students, and a potential service to industry. A light source for Southeast Asia would thus be a major resource for many years. Scientists and engineers from light sources around the world look forward to providing assistance to make this a reality in Southeast Asia

Synchrotron light sources: A powerful tool for science and technology

International Nuclear Information System (INIS)

Schlachter, F.; Robinson, A.

1996-01-01

A new generation of synchrotron light sources is producing extremely bright beams of vacuum-ultraviolet and x-ray radiation, powerful new tools for research in a wide variety of basic and applied sciences. Spectromicroscopy using high spectral and spatial resolution is a new way of seeing, offering many opportunities in the study of matter. Development of a new light source provides the country or region of the world in which the light source is located many new opportunities: a focal point for research in many scientific and technological areas, a means of upgrading the technology infrastructure of the country, a means of training students, and a potential service to industry. A light source for Southeast Asia would thus be a major resource for many years. Scientists and engineers from light sources around the world look forward to providing assistance to make this a reality in Southeast Asia

Power Electronics as Efficient Interface of Renewable Energy Sources

DEFF Research Database (Denmark)

Blaabjerg, Frede; Chen, Zhe; Kjær, Søren Bækhøj

2004-01-01

The global electrical energy consumption is steadily rising and consequently there is a demand to increase the power generation capacity. A significant percentage of the required capacity increase can be based on renewable energy sources. Wind turbine technology, as the most cost effective...... renewable energy conversion system, will play an important part in our future energy supply. But other sources like microturbines, photovoltaics and fuel cell systems may also be serious contributor to the power supply. Characteristically, power electronics will be an efficient and important interface...... to the grid and this paper will first briefly discuss three different alternative/ renewable energy sources. Next, various configurations of the wind turbine technology are presented, as this technology seems to be most developed and cost-effective. Finally, the developments and requirements from the grid...

The Role of Water Governance and Irrigation Technologies in Regional-Scale Water Use and Consumption in the US West

Science.gov (United States)

Lammers, R. B.; Grogan, D. S.; Frolking, S. E.; Proussevitch, A. A.; Zuidema, S.; Fowler, L.; Caccese, R. T.; Peklak, D. L.; Fisher-Vanden, K.

2017-12-01

Water management in the Western USA is challenged by the demands of an increased population, ecological needs and changing values for water use, and a broadening of variability in climate, which together have created physical limits on water availability. The management of scarce water resources in this region is strictly constrained by the current legal structure (prior appropriation water rights) on one hand, and on the other assisted by the development of new, efficient water delivery and application technologies. Therefore, critical components for a complete understanding of the hydrological landscape include the institutions governing water rights, the technologies used for the highly water consumptive agricultural sector, and the role institutions and technologies play in altering when and where water is used and consumed by humans or reserved for the environment. To explore the sensitivities of water availability within the human-physical system, we present a method to incorporate water rights allocated under the prior appropriation doctrine for the western U.S. into the University of New Hampshire macro-scale Water Balance Model to capture the essential structure of these rights and their impacts on different economic sectors in Idaho and across the US West. In addition to legal structures, new irrigation technologies also alter the efficiency and timing of water use. We assess the impacts of a variety of technologies for both the delivery of water to the agricultural fields and the application methods for bringing water to the crops on consumptive and non-consumptive agricultural water use. We explore the impacts relative to natural climate variability, investigate the role that return flows from different agricultural technologies have on regional water balance, and examine the sensitivity of the entire system to extremes such as extended drought. These methods are sufficiently generalizable to be used by other hydrological models.

Consumption of added sugars among US children and adults by food purchase location and food source123

Science.gov (United States)

Drewnowski, Adam; Rehm, Colin D

2014-01-01

Background: The proposed changes to the Nutrition Facts Label by the US Food and Drug Administration will include information on added sugars for the first time. Objective: The objective was to evaluate the sources of added sugars in the diets of a representative sample of US children and adults by food purchase location and food source (eg, food group). Design: This cross-sectional study among 31,035 children, adolescents, and adults aged ≥6 y from the 2003–2004, 2005–2006, 2007–2008, and 2009–2010 NHANES used data from a 24-h dietary recall to evaluate consumption of added sugars. Food locations of origin were identified as stores (supermarket or grocery store), quick-service restaurants/pizza (QSRs), full-service restaurants (FSRs), schools, and others (eg, vending machines or gifts). Added sugars consumption by food purchase location was evaluated by age, family income-to-poverty ratio, and race-ethnicity. Food group sources of added sugars were identified by using the National Cancer Institute food categories. Results: Added sugars accounted for ∼14.1% of total dietary energy. Between 65% and 76% of added sugars came from stores, 6% and 12% from QSRs, and 4% and 6% from FSRs, depending on age. Older adults (aged ≥51 y) obtained a significantly greater proportion of added sugars from stores than did younger adults. Lower-income adults obtained a significantly greater proportion of added sugars from stores than did higher-income adults. Intake of added sugars did not vary by family income among children/adolescents. Soda and energy and sports drinks were the largest food group sources of added sugars (34.4%), followed by grain desserts (12.7%), fruit drinks (8.0%), candy (6.7%), and dairy desserts (5.6%). Conclusions: Most added sugars came from foods obtained from stores. The proposed changes to the Nutrition Facts Label should capture the bulk of added sugars in the US food supply, which suggests that the recommended changes have the potential to

Relation Decomposing between Urbanization and Consumption of Water-Energy Sources

Science.gov (United States)

Wang, Y.; Xiao, W.; Wang, Y.; Zhao, Y.; Wang, J., , Dr; Jiang, D.; Wang, H.

2017-12-01

Abstract: Water resources and energy, important subsystems of city, are the basic guarantee for the normal operation of city, which play an important role to brace the urbanization. The interdependence between them are increasing along with the rapid development of China's economy. The relationship between urbanization and consumption of energy and water have become the focal point of the scholars, but the research have more attention to the impact of urbanization on two subsystems separately, and do not reveal the effects of urbanization on the water-energy nexus. Thus, there is little consideration upon the different characteristics of China's several regions in water and energy consumption in urbanization. In this paper, the STIRPAT model is built to reveal the relationship between urbanization and the consumption of water and energy. Also, the influence of urbanization on different main body of water and energy consumption are discussed. The different regional main factors of water and energy in the process of urbanization are identified through water and energy panel data of China's thirty provinces. Finally, through the regression analysis of total water consumption data of agriculture, industry, service industry with total energy consumption data, the relationship of water and energy in the process of urban development are analyzed.

Reconnecting the technology characterisation of the hydrogen economy to contexts of consumption

International Nuclear Information System (INIS)

Hodson, Mike; Marvin, Simon

2006-01-01

This paper addresses a partial but powerful view of the hydrogen economy known as 'technology characterisation' (TC). TC offers particular representations of the supply of hydrogen technologies through 'measuring' the 'state of the art'. This view is seen as an important means of generating political and policy support for technological developments through outlining technical 'possibilities' and 'options' in relation to 'costs'. Through drawing on 10 TC documents a series of practices and issues are outlined. These documents are subjected to critical interrogation as a means of saying not how TC should be applied but in outlining how it often is applied. Our analysis of these documents claims that TC conceives of technological change through a process of narrowly framing understanding of what 'relevant' costs and technological possibilities are. We claim, through this critique, that this dominant way of narrowly characterising technological change in terms of the supply of technology would benefit from an appreciation of alternative 'ways of seeing' the development of hydrogen technologies, particularly in relation to 'contexts' of their appropriation, consumption and development. We suggest that this can be done through the development of two alternative ways of seeing: a Large Technical Systems approach which addresses wider systemic considerations, and localised 'niche' developments in nurtured spaces of reflexive social learning. Through subjecting the practices of a dominant way of seeing technological development-TC-to critique this opens up the possibilities for TC practitioners to reflect on the strengths and shortcomings of their own practices. This, in addition to outlining ways of seeing the appropriation and innovation of hydrogen technologies in specific contexts, through an LTS and niche approach, offers the potential for a dialogue between the supply and the contextualised appropriation of hydrogen technologies and thus for engaging disconnected

Global Sourcing, Technology, and Factor Intensity: Firm-level Relationships

OpenAIRE

TOMIURA Eiichi

2007-01-01

This paper empirically examines how technology and capital intensity are related with the firm's global sourcing decision. Firm-level data are derived from a survey covering all manufacturing industries in Japan without any firm-size threshold. Firms are disaggregated by their make-or-buy decision (in-house or outsourcing) and by their choice of sourcing location (offshore or domestic). Capital-intensive or R&D-intensive firms tend to source in-house from their FDI affiliates rather than outs...

Recycling technology of emitted carbon dioxide

Energy Technology Data Exchange (ETDEWEB)

Arakawa, Hironori [National Inst. of Materials and Chemical Research (NIMC), Ibaraki (Japan)

1993-12-31

Ways to halt global warming are being discussed worldwide. Global warming is an energy problem which is mainly attributed to the large volumes of carbon dioxide (CO{sub 2}) released into the atmosphere from the rapid increase in energy consumption since the Industrial Revolution. The basic solution to the problem, therefore, is to cut consumption of fossil fuels. To this end, it is important to promote energy conservation by improving the fuel efficiency of machines, as well as shift to energy sources that do not emit carbon dioxide and develop related technologies. If current trends in economic growth continue in the devloping world as well as the developed countries, there can be no doubt that energy consumption will increase. Therefore, alongside energy conservation and the development of alternative energies, the importance of technologies to recover and fix CO{sub 2} will increase in the fight against global warming.

Consumption bomb.

Science.gov (United States)

Harrison, P

1999-01-01

This article focuses on the issue of consumption in relation to the growing world population. Over the past 25 years, world population increased by 53%, while world consumption per person increased by only 39%. If consumption continues to grow at 1.4%, the world consumption per person will rise by 100% over the next 50 years with the population increasing by only half that amount. The burden of reducing the environmental impact brought about by this increase lies on technology. Technology needs to deliver major changes in improving resource productivity, and decreasing the amount of waste created. Productivity such as global food production has kept up with demand. Malnutrition persists due to poverty, and not because of the inability of the world to produce enough food. However, the prospects are much worse for resources that are not traded on markets or subject to sustainable management such as groundwater, state forests, ocean fish, and communal waste sinks like rivers, lakes, and the global atmosphere. These resources are not under the direct control of people affected by shortage. People who want to change the way these resources are used or managed have to pass through the legal or political system. Usually, political responses are slow and there has to be a very widespread environmental damage before action is taken.

Necessity and organization goal of consumption within the information technology

Directory of Open Access Journals (Sweden)

K. O. Polishchuk

2015-04-01

The article aims to prove the possibility of organithetion of cultural consumption as individuals and public institutions. Defined as an attempt to build viable ways such organization as an example of Aristotle’s theory of the causes of mental institutions and three human consciousness by J. Lacan. The study analyzes the work of E. Fromm, T. Velbena, J. Baudrillard and other researchers on the specifics of the modern process of consumption. Outlined the risks of spontaneous, unconscious consumption of goods and information. It is proposed to use the methodology of J. Lacan to classify the information we consume. Attention is focused on the importance of goal­consumption. Selected and analyzed social institutions, able to organize the culture of consumption. Conclusions proposed idea of family education and self­organization of cultural consumption.

Modeling of current consumption in 802.15.4/ZigBee sensor motes.

Science.gov (United States)

Casilari, Eduardo; Cano-García, Jose M; Campos-Garrido, Gonzalo

2010-01-01

Battery consumption is a key aspect in the performance of wireless sensor networks. One of the most promising technologies for this type of networks is 802.15.4/ZigBee. This paper presents an empirical characterization of battery consumption in commercial 802.15.4/ZigBee motes. This characterization is based on the measurement of the current that is drained from the power source under different 802.15.4 communication operations. The measurements permit the definition of an analytical model to predict the maximum, minimum and mean expected battery lifetime of a sensor networking application as a function of the sensor duty cycle and the size of the sensed data.

Energy sources consumption: end uses, efficiency and productivity

International Nuclear Information System (INIS)

Martin, J.M.

2005-01-01

This document analyzes the impact of the choices made by all actors, from the energy producers to the process and infrastructure designers and the end users, in the evolution of energy consumptions. Some very little improvements made in the energy efficiency of appliances can become equivalent to the production of several oil fields or power plants at the world scale. More efficient energy uses will not replace the additional productions but they must be considered together to be compared. The energy files are first analyzed as a whole in order to show the hidden field of energy choices. In this framework, users, designers and fitters have to face very different choices because they consider efficiency improvements under different aspects: scientifical, technical, economical and social (public information and habits). These differences in efficiency uses have a time and spatial impact on the growth of energy consumption. The economical and social factors influence the collective way to consume energy and are expressed by the energy intensity of the economic activity. The last part of this document analyzes the influence of this notion on the world energy consumption scenarios at the 2050 prospects. (J.S.)

DUV light source availability improvement via further enhancement of gas management technologies

Science.gov (United States)

Riggs, Daniel J.; O'Brien, Kevin; Brown, Daniel J. W.

2011-04-01

The continuous evolution of the semiconductor market necessitates ever-increasing improvements in DUV light source uptime as defined in the SEMI E10 standard. Cymer is developing technologies to exceed current and projected light source availability requirements via significant reduction in light source downtime. As an example, consider discharge chamber gas management functions which comprise a sizable portion of DUV light source downtime. Cymer's recent introduction of Gas Lifetime Extension (GLXTM) as a productivity improvement technology for its DUV lithography light sources has demonstrated noteworthy reduction in downtime. This has been achieved by reducing the frequency of full gas replenishment events from once per 100 million pulses to as low as once per 2 billion pulses. Cymer has continued to develop relevant technologies that target further reduction in downtime associated with light source gas management functions. Cymer's current subject is the development of technologies to reduce downtime associated with gas state optimization (e.g. total chamber gas pressure) and gas life duration. Current gas state optimization involves execution of a manual procedure at regular intervals throughout the lifetime of light source core components. Cymer aims to introduce a product enhancement - iGLXTM - that eliminates the need for the manual procedure and, further, achieves 4 billion pulse gas lives. Projections of uptime on DUV light sources indicate that downtime associated with gas management will be reduced by 70% when compared with GLX2. In addition to reducing downtime, iGLX reduces DUV light source cost of operation by constraining gas usage. Usage of fluorine rich Halogen gas mix has been reduced by 20% over GLX2.

Fructose consumption in the Netherlands: the Dutch national food consumption survey 2007-2010

NARCIS (Netherlands)

Sluik, D.; Engelen, A.I.P.; Feskens, E.J.M.

2015-01-01

Background/objectives: Despite the worldwide scientific and media attention, the actual fructose consumption in many non-US populations is not clear. The aim of this study was to estimate the fructose consumption and its main food sources in a representative sample of the general Dutch population.

Evolution of food consumption in Romania

Directory of Open Access Journals (Sweden)

Elena Peț

2014-05-01

Full Text Available Closely connected to production, consumption plays an active catalyst role because all economic activities end in consumption. From this perspective, consumption research is a good solution to identify offer accurately and meet the needs and, on the other hand, it is an important source of information in marketing. Consumption ranges among the first in the process of goods use. Consumption is the process of using goods to meet consumption needs (though not all needs since there is always a gap between needs and consumption.

Natural and technologically enhanced sources of radon-222

International Nuclear Information System (INIS)

Travis, C.C.; Watson, A.P.; McDowell-Boyer, L.M.; Cotter, S.J.; Randolph, M.L.; Fields, D.E.

1979-01-01

An assessment of 222 Rn releases (curies/year) from major natural and technologically enhanced sources in the United States is presented. The resulting inhalation population dose commitments to the bronchial epithelium of the lung (lung-rem) are also estimated. The sources of radon considered are natural soil, evapotranspiration, potable water supplies, building materials, natural gas, uranium mining and milling, coal and phosphate mining, phosphate fertilizer, liquefied petroleum gas, geothermal power facilities, coal-fired power plants, and gas and oil wells. The most important natural source of 222 Rn is decay of 226 Ra in the soil and rocks of the earth's crust. This source results in approximately 40% of the total population dose from all sources of radon. The largest technoligcally enhanced contributor to population dose is airborne 222 Rn in building interiors, which is estimated to contribute 55% to the total population exposure to 222 Rn. Each of the other sources is estimated to contribute less than 3% to the total

Transfer of technology: Management of disused radioactive sources

International Nuclear Information System (INIS)

Friedrich, V.

2001-01-01

The number of sealed radioactive sources worldwide is estimated to be in the millions, although the existing registries indicate a much smaller number. If a source is no longer needed or has become unfit for the intended application, it is classified as spent or disused source. The activity of a disused source may still be in the order of GBq or TBq. Recognizing the risk associated with disused radioactive sources and the number of incidents and accidents with a wide range of consequences including widespread contamination and deterministic health effects, the IAEA has embarked on various activities dealing with the safe management of disused radioactive sources. These activities include publication of up-to-date technical information and guidance, development and distribution of management tools, transfer of technology and know-how through training and technical co-operation projects and direct assistance to solve specific safety and technical problems. This paper briefly describes these activities with reference to publications and projects carried out in various Member States. (author)

Data mining, mining data : energy consumption modelling

Energy Technology Data Exchange (ETDEWEB)

Dessureault, S. [Arizona Univ., Tucson, AZ (United States)

2007-09-15

Most modern mining operations are accumulating large amounts of data on production and business processes. Data, however, provides value only if it can be translated into information that appropriate users can utilize. This paper emphasized that a new technological focus should emerge, notably how to concentrate data into information; analyze information sufficiently to become knowledge; and, act on that knowledge. Researchers at the Mining Information Systems and Operations Management (MISOM) laboratory at the University of Arizona have created a method to transform data into action. The data-to-action approach was exercised in the development of an energy consumption model (ECM), in partnership with a major US-based copper mining company, 2 software companies, and the MISOM laboratory. The approach begins by integrating several key data sources using data warehousing techniques, and increasing the existing level of integration and data cleaning. An online analytical processing (OLAP) cube was also created to investigate the data and identify a subset of several million records. Data mining algorithms were applied using the information that was isolated by the OLAP cube. The data mining results showed that traditional cost drivers of energy consumption are poor predictors. A comparison was made between traditional methods of predicting energy consumption and the prediction formed using data mining. Traditionally, in the mines for which data were available, monthly averages of tons and distance are used to predict diesel fuel consumption. However, this article showed that new information technology can be used to incorporate many more variables into the budgeting process, resulting in more accurate predictions. The ECM helped mine planners improve the prediction of energy use through more data integration, measure development, and workflow analysis. 5 refs., 11 figs.

Energy consumption: Past, present, future

Science.gov (United States)

1973-01-01

The energy consumption history of the United States and the changes which could occur in consumption characteristics in the next 50 years are presented. The various sources of energy are analyzed to show the limitations involved in development and utilization as a function of time available. Several scenarios were prepared to show the consumption and supply of energy under varying conditions.

Methods of computer experiment in gamma-radiation technologies using new radiation sources

CERN Document Server

Bratchenko, M I; Rozhkov, V V

2001-01-01

Presented id the methodology of computer modeling application for physical substantiation of new irradiation technologies and irradiators design work flow. Modeling tasks for irradiation technologies are structured along with computerized methods of their solution and appropriate types of software. Comparative analysis of available packages for Monte-Carlo modeling of electromagnetic processes in media is done concerning their application to irradiation technologies problems. The results of codes approbation and preliminary data on gamma-radiation absorbed dose distributions for nuclides of conventional sources and prospective Europium-based gamma-sources are presented.

Energy Consumption Management of Virtual Cloud Computing Platform

Science.gov (United States)

Li, Lin

2017-11-01

For energy consumption management research on virtual cloud computing platforms, energy consumption management of virtual computers and cloud computing platform should be understood deeper. Only in this way can problems faced by energy consumption management be solved. In solving problems, the key to solutions points to data centers with high energy consumption, so people are in great need to use a new scientific technique. Virtualization technology and cloud computing have become powerful tools in people’s real life, work and production because they have strong strength and many advantages. Virtualization technology and cloud computing now is in a rapid developing trend. It has very high resource utilization rate. In this way, the presence of virtualization and cloud computing technologies is very necessary in the constantly developing information age. This paper has summarized, explained and further analyzed energy consumption management questions of the virtual cloud computing platform. It eventually gives people a clearer understanding of energy consumption management of virtual cloud computing platform and brings more help to various aspects of people’s live, work and son on.

Precision linac and laser technologies for nuclear photonics gamma-ray sources

Energy Technology Data Exchange (ETDEWEB)

Albert, F.; Hartemann, F. V.; Anderson, S. G.; Cross, R. R.; Gibson, D. J.; Hall, J.; Marsh, R. A.; Messerly, M.; Wu, S. S.; Siders, C. W.; Barty, C. P. J. [Lawrence Livermore National Laboratory, NIF and Photon Science, 7000 East Avenue, Livermore, California 94550 (United States)

2012-05-15

Tunable, high precision gamma-ray sources are under development to enable nuclear photonics, an emerging field of research. This paper focuses on the technological and theoretical challenges related to precision Compton scattering gamma-ray sources. In this scheme, incident laser photons are scattered and Doppler upshifted by a high brightness electron beam to generate tunable and highly collimated gamma-ray pulses. The electron and laser beam parameters can be optimized to achieve the spectral brightness and narrow bandwidth required by nuclear photonics applications. A description of the design of the next generation precision gamma-ray source currently under construction at Lawrence Livermore National Laboratory is presented, along with the underlying motivations. Within this context, high-gradient X-band technology, used in conjunction with fiber-based photocathode drive laser and diode pumped solid-state interaction laser technologies, will be shown to offer optimal performance for high gamma-ray spectral flux, narrow bandwidth applications.

Wind Power - A Power Source Enabled by Power Electronics

DEFF Research Database (Denmark)

Blaabjerg, Frede; Chen, Zhe

2004-01-01

. The deregulation of energy has lowered the investment in bigger power plants, which means the need for new electrical power sources may be very high in the near future. Two major technologies will play important roles to solve the future problems. One is to change the electrical power production sources from......The global electrical energy consumption is still rising and there is a steady demand to increase the power capacity. The production, distribution and the use of the energy should be as technological efficient as possible and incentives to save energy at the end-user should be set up...... the conventional, fossil (and short term) based energy sources to renewable energy sources. The other is to use high efficient power electronics in power systems, power production and end-user application. This paper discuss the most emerging renewable energy source, wind energy, which by means of power...

Integrated Magnetic MEMS Relays: Status of the Technology

Directory of Open Access Journals (Sweden)

Giuseppe Schiavone

2014-08-01

Full Text Available The development and application of magnetic technologies employing microfabricated magnetic structures for the production of switching components has generated enormous interest in the scientific and industrial communities over the last decade. Magnetic actuation offers many benefits when compared to other schemes for microelectromechanical systems (MEMS, including the generation of forces that have higher magnitude and longer range. Magnetic actuation can be achieved using different excitation sources, which create challenges related to the integration with other technologies, such as CMOS (Complementary Metal Oxide Semiconductor, and the requirement to reduce power consumption. Novel designs and technologies are therefore sought to enable the use of magnetic switching architectures in integrated MEMS devices, without incurring excessive energy consumption. This article reviews the status of magnetic MEMS technology and presents devices recently developed by various research groups, with key focuses on integrability and effective power management, in addition to the ability to integrate the technology with other microelectronic fabrication processes.

Modeling of Current Consumption in 802.15.4/ZigBee Sensor Motes

Directory of Open Access Journals (Sweden)

Eduardo Casilari

2010-06-01

Full Text Available Battery consumption is a key aspect in the performance of wireless sensor networks. One of the most promising technologies for this type of networks is 802.15.4/ZigBee. This paper presents an empirical characterization of battery consumption in commercial 802.15.4/ZigBee motes. This characterization is based on the measurement of the current that is drained from the power source under different 802.15.4 communication operations. The measurements permit the definition of an analytical model to predict the maximum, minimum and mean expected battery lifetime of a sensor networking application as a function of the sensor duty cycle and the size of the sensed data.

External technology sourcing : The effect of uncertainty on governance mode choice

NARCIS (Netherlands)

van de Vrande, V.; Vanhaverbeke, W.P.M.; Duijsters, G.M.

2009-01-01

External knowledge sourcing is increasingly important for corporate entrepreneurship. In this study, we examine the effect of external and relational uncertainty on the governance choice for inter-organizational technology sourcing. We develop a number of hypotheses about the impact of environmental

[Effects of starvation on the consumption of energy sources and swimming performance in juvenile Gambusia affinis and Tanichthys albonubes].

Science.gov (United States)

Li, Jiang-tao; Lin, Xiao-tao; Zhou, Chen-hui; Zeng, Peng; Xu, Zhong-neng; Sun, Jun

2016-01-01

To explore the consumption of energy sources and swimming performance of juvenile Gambusia affinis and Tanichthys albonubes after starvation, contents of glycogen, lipid and protein, burst swimming speeds (Uburst), and critical swimming speeds (Ucrit) at different starvation times (0, 10, 20, 30 and 40 days) were evaluated. The results showed that, at 0 day, contents of glycogen and lipid were significantly lower in G. affinis than those in T. albonubes, whereas no significant difference in content of protein between two experimental fish was found. Swimming speeds in G. affinis were significantly lower than those in T. albonubes for all swimming performances. After different starvation scenarios, content of glycogen both in G. affinis and T. albonubes decreased significantly in power function trend with starvation time and were close to zero after starvation for 10 days, whereas the contents of lipid and protein were linearly significantly decreased. The slope of line regression equation between content of lipid and starvation time in G. affinis was significantly lower than that in T. albonubes, whereas there was a significantly higher slope of line equation between content of protein and starvation time in G. affinis. 40 days later, the consumption rate of glycogen both in G. affinis and T. albonubes were significantly higher than that of lipid, while the consumption rate of protein was the least. Consumption amounts of glycogen in all experimental fish were the least, G. affinis consumed more protein than lipid, and T. albonubes consumed more lipid than protein. Uburst and Ucrit decreased significantly linearly with starvation time for all experimental fish. Slope of linear equation between Uburst and starvation time was not significantly different between G. affinis and T. albonubes. However, the straight slope between Ucrit and starvation time was significantly lower in G. affinis than that in T. albonubes. These findings indicated that there was close

Consumption of added sugars from liquid but not solid sources predicts impaired glucose homeostasis and insulin resistance among youth at risk of obesity.

Science.gov (United States)

Wang, Jiawei; Light, Kelly; Henderson, Mélanie; O'Loughlin, Jennifer; Mathieu, Marie-Eve; Paradis, Gilles; Gray-Donald, Katherine

2014-01-01

Little is known about longitudinal associations between added sugar consumption (solid and liquid sources) and glucose-insulin homeostasis among youth. Caucasian children (8-10 y) with at least one obese biological parent were recruited in the QUébec Adipose and Lifestyle InvesTigation in Youth (QUALITY) cohort (n = 630) and followed-up 2 y later (n = 564). Added sugars were assessed by 3 24-h dietary recalls at baseline. Two-year changes were examined in multivariate linear regression models, adjusting for baseline level, age, sex, Tanner stage, energy intake, fat mass (dual-energy X-ray absorptiometry), and physical activity (7 d accelerometer). Added sugar intake in either liquid or solid sources was not related to changes in adiposity measures (fat mass, body mass index, or waist circumference). However, a higher consumption (10 g/d) of added sugars from liquid sources was associated with 0.04 mmol/L higher fasting glucose, 2.3 pmol/L higher fasting insulin, 0.1 unit higher homeostasis model assessment of insulin resistance (HOMA-IR), and 0.4 unit lower Matsuda-insulin sensitivity index (Matsuda-ISI) in all participants (P added sugars from solid sources. Overweight/obese children at baseline had greater increases in adiposity indicators, fasting insulin, and HOMA-IR and decreases in Matsuda-ISI during those 2 y than normal-weight children. Consumption of added sugars from liquid or solid sources was not associated with changes in adiposity, but liquid added sugars were a risk factor for the development of impaired glucose homeostasis and insulin resistance over 2 y among youth at risk of obesity.

Decomposition of CO2 emissions change from energy consumption in Brazil: Challenges and policy implications

International Nuclear Information System (INIS)

Freitas, Luciano Charlita de; Kaneko, Shinji

2011-01-01

This study evaluates the changes in CO 2 emissions from energy consumption in Brazil for the period 1970-2009. Emissions are decomposed into production and consumption activities allowing computing the full set of energy sources consumed in the country. This study aims to develop a comprehensive and updated picture of the underlying determinants of emissions change from energy consumption in Brazil along the last four decades, including for the first time the recently released data for 2009. Results demonstrate that economic activity and demographic pressure are the leading forces explaining emission increase. On the other hand, carbon intensity reductions and diversification of energy mix towards cleaner sources are the main factors contributing to emission mitigation, which are also the driving factors responsible for the observed decoupling between CO 2 emissions and economic growth after 2004. The cyclical patterns of energy intensity and economy structure are associated to both increments and mitigation on total emission change depending on the interval. The evidences demonstrate that Brazilian efforts to reduce emissions are concentrated on energy mix diversification and carbon intensity control while technology intensive alternatives like energy intensity has not demonstrated relevant progress. Residential sector displays a marginal weight in the total emission change. - Research highlights: → Article provides an updated evaluation on the changes in CO 2 emissions from energy consumption in Brazil, including the recently released data for 2009. → Results demonstrate that progress in energy mix diversification and associated factors are the most important factors contributing to emission mitigation in Brazil. → Negligence in technology intensive factors, as energy intensity, has offset most efforts on emission mitigation related to energy consumption. → Paper announces a first episode of absolute decoupling between GDP growth and CO 2 emission

Developing a framework for energy technology portfolio selection

Science.gov (United States)

Davoudpour, Hamid; Ashrafi, Maryam

2012-11-01

Today, the increased consumption of energy in world, in addition to the risk of quick exhaustion of fossil resources, has forced industrial firms and organizations to utilize energy technology portfolio management tools viewed both as a process of diversification of energy sources and optimal use of available energy sources. Furthermore, the rapid development of technologies, their increasing complexity and variety, and market dynamics have made the task of technology portfolio selection difficult. Considering high level of competitiveness, organizations need to strategically allocate their limited resources to the best subset of possible candidates. This paper presents the results of developing a mathematical model for energy technology portfolio selection at a R&D center maximizing support of the organization's strategy and values. The model balances the cost and benefit of the entire portfolio.

Advanced exhaust nozzle technology

Energy Technology Data Exchange (ETDEWEB)

Glidewell, R J; Warburton, R E

1981-01-01

Recent developments in turbine engine exhaust nozzle technology include nonaxisymmetric nozzles, thrust reversing, and thrust vectoring. Trade studies have been performed to determine the impact of these developments on the thrust-to-weight ratio and specific fuel consumption of an advanced high performance, augmented turbofan engine. Results are presented in a manner which provides an understanding of the sources and magnitudes of differences in the basic elements of nozzle internal performance and weight as they relate to conventional, axisymmetric nozzle technology. Conclusions are presented and recommendations are made with regard to future directions of advanced development and demonstration. 5 refs.

Federal Technology Alert: Ground-Source Heat Pumps Applied to Federal Facilities-Second Edition; FINAL

International Nuclear Information System (INIS)

Hadley, Donald L

2001-01-01

This Federal Technology Alert, which was sponsored by the U.S. Department of Energy's Office of Federal Energy Management Programs, provides the detailed information and procedures that a Federal energy manager needs to evaluate most ground-source heat pump applications. This report updates an earlier report on ground-source heat pumps that was published in September 1995. In the current report, general benefits of this technology to the Federal sector are described, as are ground-source heat pump operation, system types, design variations, energy savings, and other benefits. In addition, information on current manufacturers, technology users, and references for further reading are provided

Financial Development, Economic Growth and Energy Consumption Nexus in Cote d’Ivoire

Directory of Open Access Journals (Sweden)

Diby Kassi

2017-10-01

Full Text Available This paper examines the relationship between financial development, economic growth and energy consumption in Cote d’Ivoire over the period 1971-2011. To do so, the study first built a synthetic indicator of financial development through the principal component analysis technique (PCA and used four energy sources such as electric power consumption, electricity production from renewable sources, electricity production from oil sources and electricity production from hydroelectric sources. Then, employing the autoregressive distributed lag (ARDL bounds testing approach to cointegration, we find that there is a long run relationship between financial development, economic growth and energy consumption sources. Furthermore, the results of the vector error correction models (VECM reveal unidirectional causality running from financial development to energy consumption sources, bidirectional causality between economic growth and energy consumption and unidirectional causality from financial development to economic growth in the long run. The mixed results are due to the use of different proxies for energy consumption. Accordingly, this paper recommends that policy makers should solicit the support of financial sector in order to solve energy problems and further the diversification of the energy consumption sources since financial development has a positive effect on energy consumption in long run. Moreover, government should develop public-private partnership (PPP to stimulate economic growth, improve the access to energy and maintain a sustainable development in Cote d’Ivoire.

Innovative ion sources for accelerators: the benefits of the plasma technology

Czech Academy of Sciences Publication Activity Database

Gammino, S.; Ciavola, G.; Celona, L.; Torrisi, L.; Ando, L.; Presti, M.; Láska, Leoš; Krása, Josef; Wolowski, J.

2004-01-01

Roč. 54, Suppl. C (2004), s. C883-C888 ISSN 0011-4626. [Symposium on Plasma Physics and Technology /21./. Praha, 14.06.2004-17.06.2004] R&D Projects: GA AV ČR IAA1010405 Institutional research plan: CEZ:AV0Z1010921 Keywords : plasma sources * ion sources * proton sources * ECR Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 0.292, year: 2004

Specific factors influencing information system/information and communication technology sourcing strategies in healthcare facilities.

Science.gov (United States)

Potančok, Martin; Voříšek, Jiří

2016-09-01

Healthcare facilities use a number of information system/information and communication technologies. Each healthcare facility faces a need to choose sourcing strategies most suitable to ensure provision of information system/information and communication technology services, processes and resources. Currently, it is possible to observe an expansion of sourcing possibilities in healthcare informatics, which creates new requirements for sourcing strategies. Thus, the aim of this article is to identify factors influencing information system/information and communication technology sourcing strategies in healthcare facilities. The identification was based on qualitative research, namely, a case study. This study provides a set of internal and external factors with their impact levels. The findings also show that not enough attention is paid to these factors during decision-making. © The Author(s) 2015.

Power electronics - key technology for renewable energy systems

DEFF Research Database (Denmark)

Blaabjerg, Frede; Iov, Florin; Kerekes, Tamas

2011-01-01

sources to renewable energy sources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss trends of the most emerging renewable energy sources, wind energy and photovoltaics, which by means of power electronics...... as efficient as possible. Further, the emerging climate changes is arguing to find sustainable future solutions. Of many options, two major technologies will play important roles to solve parts of those future problems. One is to change the electrical power production from conventional, fossil based energy......The electrical energy consumption continues to grow and more applications are based on electricity. We can expect that more 60% of all energy consumption will be converted and used as electricity. Therefore, it is a demand that production, distribution and use of electrical energy are done...

Changing practices of energy consumption

DEFF Research Database (Denmark)

Christensen, Toke Haunstrup; Friis, Freja; Skjølsvold, Tomas Moe

2017-01-01

to produce hydrogen for transport use), whereas others emphasise the role of individual consumers. The latter approach is dominant within the smart grid vision. In this paper, we explore implications of smart grid technologies in households for the everyday practices related to electricity consumption...... (microgeneration) influence the everyday practices? What kind of influence does the combination of PVs with other “smart” energy technologies have on everyday practices and electricity consumption patterns? A specific focus is on the time patterns of households’ energy consumption. The analysis is based...... settlement scheme (hourly versus annual net metering) and the trial context play a role. Also, the study finds a broader interest in increasing the level of self-sufficiency through combining PVs with home batteries. Finally, the paper discusses a distinct (male) gendering in relation to who is most actively...

BIOSENSOR TECHNOLOGY EVALUATIONS FOR REAL-TIME/SOURCE WATER PROTECTION

Science.gov (United States)

Recent advances in electronics and computer technology have made great strides in the field of remote sensing and biomonitoring. The quality of drinking water sources has come under closer scrutiny in recent years. Issues ranging from ecological to public health and national se...

Public support for energy sources and related technologies: The impact of simple information provision

International Nuclear Information System (INIS)

Hobman, Elizabeth V.; Ashworth, Peta

2013-01-01

Increasing public awareness and understanding of alternative energy sources and related technologies is an essential component of informed decision-making regarding new options of generating energy for a low carbon future. The current study examined the influence of psychological factors (i.e., pro-environmental beliefs, and subjective norms) and the provision of factual information on public support for a range of energy sources and related technologies. A representative sample of 1907 Australians completed an on-line survey that measured perceptions of a range of climate change and energy issues. Results showed that support for renewables is stronger than support for traditional fossil-fuel based energy sources (i.e., coal or gas) or nuclear energy. The provision of factual information about generation cost and emissions significantly changed support ratings, particularly when cost information was provided. Regression analyses revealed that pro-environmental beliefs were significantly related to support ratings for alternative energy sources. Subjective norms, however, were the strongest positive explanatory factor, suggesting that social mechanisms may be key drivers of support for new and emerging energy sources and related technologies. - Highlights: • We examine support for a wide range of energy sources and technologies. • Support changes when information on cost and emissions is provided. • Pro-environmental beliefs and social norms positively relate to support

Decomposition of CO{sub 2} emissions change from energy consumption in Brazil: Challenges and policy implications

Energy Technology Data Exchange (ETDEWEB)

Freitas, Luciano Charlita de, E-mail: lucianofreitas@hiroshima-u.ac.j [Graduate School for International Development and Cooperation, Development Policy, Hiroshima University 1-5-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8529 (Japan); Kaneko, Shinji [Graduate School for International Development and Cooperation, Development Policy, Hiroshima University 1-5-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8529 (Japan)

2011-03-15

This study evaluates the changes in CO{sub 2} emissions from energy consumption in Brazil for the period 1970-2009. Emissions are decomposed into production and consumption activities allowing computing the full set of energy sources consumed in the country. This study aims to develop a comprehensive and updated picture of the underlying determinants of emissions change from energy consumption in Brazil along the last four decades, including for the first time the recently released data for 2009. Results demonstrate that economic activity and demographic pressure are the leading forces explaining emission increase. On the other hand, carbon intensity reductions and diversification of energy mix towards cleaner sources are the main factors contributing to emission mitigation, which are also the driving factors responsible for the observed decoupling between CO{sub 2} emissions and economic growth after 2004. The cyclical patterns of energy intensity and economy structure are associated to both increments and mitigation on total emission change depending on the interval. The evidences demonstrate that Brazilian efforts to reduce emissions are concentrated on energy mix diversification and carbon intensity control while technology intensive alternatives like energy intensity has not demonstrated relevant progress. Residential sector displays a marginal weight in the total emission change. - Research highlights: {yields} Article provides an updated evaluation on the changes in CO{sub 2} emissions from energy consumption in Brazil, including the recently released data for 2009. {yields} Results demonstrate that progress in energy mix diversification and associated factors are the most important factors contributing to emission mitigation in Brazil. {yields} Negligence in technology intensive factors, as energy intensity, has offset most efforts on emission mitigation related to energy consumption. {yields} Paper announces a first episode of absolute decoupling between

Low-energy-consumption hybrid lasers for silicon photonics

DEFF Research Database (Denmark)

Chung, Il-Sug; Ran, Qijiang; Mørk, Jesper

2012-01-01

Physics and characteristics of a hybrid vertical-cavity laser that can be an on-chip Si light source with high speed and low energy consumption are discussed.......Physics and characteristics of a hybrid vertical-cavity laser that can be an on-chip Si light source with high speed and low energy consumption are discussed....

Estimating the rebound effect in US manufacturing energy consumption

International Nuclear Information System (INIS)

Bentzen, Jan

2004-01-01

The energy price shocks of the 1970s are usually assumed to have increased the search for new energy saving technologies where eventual gains in energy efficiencies will reduce the real per unit price of energy services and hence, the consumption of energy will rise and partially offset the initial reduction in the usage of energy sources. This is the 'rebound effect', which is estimated for the US manufacturing sector using time series data applying the dynamic OLS method (DOLS). When allowing for asymmetric price effects the rebound effect is found to be approximately 24% for the US manufacturing sector

State energy data report 1992: Consumption estimates

Energy Technology Data Exchange (ETDEWEB)

1994-05-01

This is a report of energy consumption by state for the years 1960 to 1992. The report contains summaries of energy consumption for the US and by state, consumption by source, comparisons to other energy use reports, consumption by energy use sector, and describes the estimation methodologies used in the preparation of the report. Some years are not listed specifically although they are included in the summary of data.

Assessment of Renewable Sources for the Energy Consumption in Malta in the Mediterranean Sea

Directory of Open Access Journals (Sweden)

Vincenzo Franzitta

2016-12-01

Full Text Available The main purpose of this paper is to analyze the energy production in the Maltese islands, focusing on the employment of renewable energies in order to increase their energy independence. The main renewable source here proposed is wave energy: thanks to a strategic position, Malta will be able to produce electrical energy using an innovative type of Wave Energy Converter (WEC based on the prototype of a linear generator realized by University of Palermo. The use of this new technology will be able to cut down the electrical energy production from traditional power plants and, consequently, the greenhouse gas emissions (GHG. Wave energy source and off-shore photovoltaic (PV technology are here proposed. Particularly, the installation of 12 wave farms, for a total installed capacity of 86 MW, will generate about 9.5% of Malta’s energy requirement in 2025, while the installation of 9.6 MW of off-shore PV will generate about 0.73%.

Ultrasound Assisted Extraction for the Recovery of Phenolic Compounds from Vegetable Sources

Directory of Open Access Journals (Sweden)

Nelly Medina-Torres

2017-07-01

Full Text Available Vegetable sources and agro-industrial residues represent an important source of phenolic compounds that are useful in a wide range of applications, especially those with biological activities. Conventional techniques of phytochemical extraction have been associated with a high consumption of organic solvents that limits the application of bioactive extracts, leading to the implementation of novel extraction technologies using mechanisms such as Ultrasound Assisted Extraction (UAE. In the present review, an analysis of the involved variables in the extraction yield of phenolic compounds through UAE is presented, highlighting the advantages of this technology based on the results obtained in various optimized studies. A comparison with other technologies and a proposal of its possible application for agro industrial residues as raw material of phenolic compounds is also indicated. Finally, it is concluded that UAE is a technology that is placed within the area of Sustainable Chemistry since it promotes the use of renewable raw materials through the extraction of phenolic compounds, implementing the substitution of organic solvents with solvents that do not present toxic effects, lowering the energy consumption when compared to conventional methods and minimizing process times and temperatures, which is useful for the extraction of thermo-labile compounds.

Beyond Open Source: According to Jim Hirsch, Open Technology, Not Open Source, Is the Wave of the Future

Science.gov (United States)

Villano, Matt

2006-01-01

This article presents an interview with Jim Hirsch, an associate superintendent for technology at Piano Independent School District in Piano, Texas. Hirsch serves as a liaison for the open technologies committee of the Consortium for School Networking. In this interview, he shares his opinion on the significance of open source in K-12.

Sustainable consumption and greenhouse gas mitigation

Energy Technology Data Exchange (ETDEWEB)

Michaelis, Laurie [Sustainable Futures Programme, University of Oxford Environmental Change Institute, 1a Mansfield Road, Oxford OX1 3SZ (United Kingdom)

2003-11-01

The international discourses on climate change and sustainable development represent different cultures. The sustainable development process has sought to build agreement among competing discourse coalitions. The climate change process focuses on designing cost-effective measures based on expert analysis. Sustainable consumption presents a challenge to both communities. The challenge has been taken up within the sustainable development process but little progress has been made. High consuming lifestyles seem 'locked-in' by the economic, technological and cultural context. Nevertheless, there are several reasons for optimism that sustainable consumption patterns might develop. One is the diversity of current consumption patterns and the growing minority concerned with ethical consumption. Another is the growing understanding of innovation processes, developed to address technological change, but applicable to social innovation. A third reason is the growing reflexivity of communities and institutions. Government policies that seek to manage or control consumption, or persuade consumers to change their behaviour, are important but unlikely to be sufficient to bring about sustainable consumption. A complementary strategy would establish partnerships with the public and stakeholders, developing shared visions and approaches, supporting innovation and experimentation, and learning from outcomes. Changes are also needed in policies throughout government, from employment law to trade.

Redefining Requirements of Ancillary Services for Technology Agnostic Sources

DEFF Research Database (Denmark)

Bondy, Daniel Esteban Morales; MacDonald, Jason; Kara, Emre Can

2018-01-01

New sources for ancillary services are needed, yet the requirements for service provision in most countries are explicitly formulated for traditional generators. This leads to waste of the potential for new technologies to deliver ancillary services. In order to harness this potential, we propose...... to parameterize the requirements of ancillary services so that reserves can be built by combining the advantageous properties of different technologies. The proposal is exemplified through a laboratory test where it shown that the system needs can be covered through cheaper and smaller reserves....

Domestic fuel energy consumption in an Indian urban ecosystem

International Nuclear Information System (INIS)

Misra, M.K.; Rao, B.G.; Nisanka, S.K.; Sahu, N.C.

1995-01-01

Berhampur is one of the oldest and biggest towns of Orissa State where 93% of people earn their living from non-primary economic activities. The fuel consumption structure reveals an element of rural bias since the domestic sector derives 49% of its energy used for cooking and heating from biomass sources. Firewood is the only fuel used by all income groups and almost all occupations. Other traditional fuels such as dungcake, agricultural waste and leaf litter are used in the town with different degrees of dominance in various occupation groups and income classes. The inequality of income distribution is reflected in the fuel consumption structure of the rich and poor with greater dependence on non-biomass in the high income group and biomass in the low income group. Family size is an important determinant of biomass fuel use. For the urban poor, there is a relationship between income and fuel consumption. There exists scope for enlarging the biomass base by utilising the available bio-wastes and developing a green belt around the town. This requires some rural features in the urban area using new technologies. (author)

Broadband integrated mid infrared light sources as enabling technology for point of care mid-infrared spectroscopy

Science.gov (United States)

2017-08-20

AFRL-AFOSR-JP-TR-2017-0061 Broadband integrated mid-infrared light sources as enabling technology for point-of-care mid- infrared spectroscopy Alex...mid-infrared light sources as enabling technology for point-of-care mid-infrared spectroscopy 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA2386-16-1-4037...Broadband integrated mid-infrared light sources as enabling technology for point-of-care mid- infrared spectroscopy ” Date: 16th August 2017 Name

Piped water consumption in Ghana: A case study of temporal and spatial patterns of clean water demand relative to alternative water sources in rural small towns.

Science.gov (United States)

Kulinkina, Alexandra V; Kosinski, Karen C; Liss, Alexander; Adjei, Michael N; Ayamgah, Gilbert A; Webb, Patrick; Gute, David M; Plummer, Jeanine D; Naumova, Elena N

2016-07-15

Continuous access to adequate quantities of safe water is essential for human health and socioeconomic development. Piped water systems (PWSs) are an increasingly common type of water supply in rural African small towns. We assessed temporal and spatial patterns in water consumption from public standpipes of four PWSs in Ghana in order to assess clean water demand relative to other available water sources. Low water consumption was evident in all study towns, which manifested temporally and spatially. Temporal variability in water consumption that is negatively correlated with rainfall is an indicator of rainwater preference when it is available. Furthermore, our findings show that standpipes in close proximity to alternative water sources such as streams and hand-dug wells suffer further reductions in water consumption. Qualitative data suggest that consumer demand in the study towns appears to be driven more by water quantity, accessibility, and perceived aesthetic water quality, as compared to microbiological water quality or price. In settings with chronic under-utilization of improved water sources, increasing water demand through household connections, improving water quality with respect to taste and appropriateness for laundry, and educating residents about health benefits of using piped water should be prioritized. Continued consumer demand and sufficient revenue generation are important attributes of a water service that ensure its function over time. Our findings suggest that analyzing water consumption of existing metered PWSs in combination with qualitative approaches may enable more efficient planning of community-based water supplies and support sustainable development. Copyright © 2016 Elsevier B.V. All rights reserved.

Technological challenges for boosting coal production with environmental sustainability.

Science.gov (United States)

Ghose, Mrinal K

2009-07-01

The global energy requirement has grown at a phenomenon rate and the consumption of primary energy sources has been a very high positive growth. This paper focuses on the consumption of different primary energy sources and it identifies that coal will continue to remain as the prime energy source in foreseeable future. It examines the energy requirement perspective for India and demand of coal as the prime energy source. Economic development and poverty alleviation depend on securing affordable energy sources and Indian coal mining industry offers a bright future for the country's energy security, provided the industry is allowed to develop by supportive government policies and adopts latest technologies for mining. It is an irony that in-spite of having a plentiful reserves, India is not able to jack up coal production to meet its current and future demand. It discusses the strategies to be adopted for growth and meeting the coal demand. But such energy are very much concerned with environmental degradation and must be driven by contemporary managerial acumen addressing environmental and social challenges effectively The paper highlights the emissions of greenhouse gases due to burning of fossil fuels and environmental consequences of global warming and sea-level rise. Technological solutions for environment friendly coal mining and environmental laws for the abatement of environmental degradation are discussed in this paper.

An application of a double bootstrap to investigate the effects of technological progress on total-factor energy consumption performance in China

International Nuclear Information System (INIS)

Li, Ke; Lin, Boqiang

2017-01-01

This paper proposes a total-factor energy consumption performance index (TEPI) for measuring China's energy efficiency across 30 provinces during the period 1997 to 2012. The TEPI is derived by solving an improved non-radial data envelopment analysis (DEA) model, which is based on an energy distance function. The production possibility set is constructed by combining the super-efficiency and sequential DEA models to avoid “discriminating power problem” and “technical regress”. In order to explore the impacts of technological progress on TEPI and perform statistical inferences on the results, a two-stage double bootstrap approach is adopted. The important findings are that China's energy technology innovation produces a negative effect on TEPI, while technology import and imitative innovation produce positive effects on TEPI. Thus, the main contribution of TEPI improvement is technology import. These conclusions imply that technology import especially foreign direct investment (FDI) is important for imitative innovation and can improve China's energy efficiency. In the long run, as the technical level of China approaches to the frontier, energy technology innovation and its wide adoption become a sustained way to improve energy efficiency. Therefore, it is urgent for China to introduce measures such as technology translation and spillover policies as well as energy pricing reforms to support energy technology innovation. - Highlights: • A total-factor energy consumption performance index (TEPI) is introduced. • Three types of technological progress have various effects on TEPI. • FDI is the main contributor of TEPI improvement. • An improved DEA calculation method is introduced. • A two-stage double-bootstrap non-radial DEA model is used.

The determinants of household energy demand in rural Beijing: Can environmentally friendly technologies be effective?

International Nuclear Information System (INIS)

Zhang Jingchao; Kotani, Koji

2012-01-01

With the recent rapid economic growth, total energy demand in rural China has increased dramatically, and the energy structure is in the transition from non-commercial to commercial sources. Simultaneously, it is expected that households in rural areas will face energy shortages and additional environmental problems unless they have more access to renewable energy technologies. However, little is known about (i) the transition of energy use patterns and (ii) whether introduced technologies have been effective. To analyze these issues, we estimated the energy demands of rural households by using survey data taken from Beijing's ten suburban districts. The data contain information on both non-commercial and commercial energy use, key characteristics of the households and several renewable energy technologies. Our empirical analysis yielded three main results. First, the per capita income is a key factor in the per capita energy consumption. More specifically, the marginal increase (or marginal change) in per capita coal consumption strongly diminishes (or declines) as per capita income increases. Second, coal and liquefied petroleum gas (LPG) prices do not exhibit substitution effects, but an increase in these prices has strong negative effects on the use of these energy resources. Third, renewable energy technologies are identified to reduce coal consumption and to improve energy efficiency. Overall, these findings suggest a positive perspective: if the Chinese government were to design appropriate policies associated with renewable energy technologies and related energy prices, then coal consumption can be reduced in the near future, and the substitution to cleaner energy use will accelerate. Therefore, a smooth energy transition in rural China could be made in a more environmentally sustainable manner. - Highlights: ► Energy demands of non-commercial/commercial sources are examined in rural Beijing. ► Income and energy prices are key determinants of the energy

Spallation sources in support of technology

Energy Technology Data Exchange (ETDEWEB)

Pynn, R [Los Alamos National Lab., NM (United States)

1996-05-01

In this contribution I summarize a number of recent experiments at the Los Alamos Neutron Science Center (LANSCE) that have contributed to strategic and applied research. A number of new tools have been developed to address these problems, including software that allows materials texture to be obtained during Rietveld refinement, Bragg-edge diffraction, resonant-neutron and proton radiography. These tools have the potential to impact basic as well as applied research. It is clear that a new, more powerful neutron source such as the planned Japanese Hadron Project will be able to use these and other techniques to contribute in a direct way to important industrial technologies. (author)

Use of Payment Technology

DEFF Research Database (Denmark)

Xiao, Xiao; Hedman, Jonas; Runnemark, Emma

2015-01-01

Drawing on the theory of consumption value, this research-in-progress strives to provide a theoretical explanation of payment technology use by investigating the relationship between consumers’ perceptions of different consumption values associated with a certain payment technology and their choice...... to use the technology. We conducted the study in the context of Denmark, a Northern European country, with three well established payment technologies: cash, payment cards, and Internet banking. Following a focus group of identifying and defining four types of consumption values associated with each...... payment technology, a survey was then conducted by a national statistics agency in the country. Preliminary results have shown that different consumption values matter for the use of different payment technologies. The findings will potentially contribute to a better understanding of consumer payment...

40 CFR 450.24 - New source performance standards reflecting the best available demonstrated control technology...

Science.gov (United States)

2010-07-01

... performance standards reflecting the best available demonstrated control technology (NSPS). Any new source... 40 Protection of Environment 29 2010-07-01 2010-07-01 false New source performance standards reflecting the best available demonstrated control technology (NSPS). 450.24 Section 450.24 Protection of...

[Evaluation of treatment technology of odor pollution source in petrochemical industry].

Science.gov (United States)

Mu, Gui-Qin; Sui, Li-Hua; Guo, Ya-Feng; Ma, Chuan-Jun; Yang, Wen-Yu; Gao, Yang

2013-12-01

Using an environmental technology assessment system, we put forward the evaluation index system for treatment technology of the typical odor pollution sources in the petroleum refining process, which has been applied in the assessment of the industrial technology. And then the best available techniques are selected for emissions of gas refinery sewage treatment plant, headspace gas of acidic water jars, headspace gas of cold coke jugs/intermediate oil tank/dirty oil tank, exhaust of oxidative sweetening, and vapors of loading and unloading oil.

Drinking water consumption patterns among adults—SMS as a novel tool for collection of repeated self-reported water consumption

OpenAIRE

Säve-Söderbergh, Melle; Toljander, Jonas; Mattisson, Irene; Åkesson, Agneta; Simonsson, Magnus

2017-01-01

Studies have shown that the average drinking water consumption ranges between 0.075 and 3 L/day for adults with both national and regional differences. For exposure assessment of drinking water hazards, country-specific drinking water consumption data including sources of the consumed water may therefore be warranted. To estimate the amount and source of drinking water consumed among adults in Sweden, we collected self-reported estimates using both traditional methods (telephone interviews, w...

Integration Of Data From Heterogeneous Sources Using Etl Technology.

Directory of Open Access Journals (Sweden)

Marek Macura

2014-01-01

Full Text Available Data integration is a crucial issue in environments of heterogeneous data sources. At present mentioned heterogeneity is becoming widespread. Whenever, based on various data sources, we want to gain useful information and knowledge we must solve data integration problem in order to apply appropriate analytical methods on comprehensive and uniform data. Such activity is known as knowledge discovery from data process. Therefore approaches to data integration problem are very interesting and bring us closer to the "age of information". The paper presents an architecture, which implements knowledge discovery from data process. The solution combines ETL technology and wrapper layer known from mediated systems. It also provides semantic integration through connections mechanism between data elements. The solution allows for integration of any data sources and implementation of analytical methods in one environment. The proposed environment is verified by applying it to data sources on the foundry industry.

Technologies for the treatment of source-separated urine in the ...

African Journals Online (AJOL)

Technologies for the treatment of source-separated urine in the eThekwini ... This practice can lead to environmental pollution, since urine contains high amounts of ... produces only distilled water and a small amount of sludge as by-products.

The UMLS Knowledge Source Server: an experience in Web 2.0 technologies.

Science.gov (United States)

Thorn, Karen E; Bangalore, Anantha K; Browne, Allen C

2007-10-11

The UMLS Knowledge Source Server (UMLSKS), developed at the National Library of Medicine (NLM), makes the knowledge sources of the Unified Medical Language System (UMLS) available to the research community over the Internet. In 2003, the UMLSKS was redesigned utilizing state-of-the-art technologies available at that time. That design offered a significant improvement over the prior version but presented a set of technology-dependent issues that limited its functionality and usability. Four areas of desired improvement were identified: software interfaces, web interface content, system maintenance/deployment, and user authentication. By employing next generation web technologies, newer authentication paradigms and further refinements in modular design methods, these areas could be addressed and corrected to meet the ever increasing needs of UMLSKS developers. In this paper we detail the issues present with the existing system and describe the new system's design using new technologies considered entrants in the Web 2.0 development era.

Potential of HVAC and solar technologies for hospital retrofit to reduce heating energy consumption

Science.gov (United States)

Pop, Octavian G.; Abrudan, Ancuta C.; Adace, Dan S.; Pocola, Adrian G.; Balan, Mugur C.

2018-02-01

The study presents a combination of several energy efficient technologies together with their potential to reduce the energy consumption and to increase the comfort through the retrofit of a hospital building. The existing situation is characterized by an old and inefficient heating system, by the complete missing of any ventilation and by no cooling. The retrofit proposal includes thermal insulation and a distributed HVAC system consisting of several units that includes air to air heat exchangers and air to air heat pumps. A condensing boiler was also considered for heating. A solar thermal system for preparing domestic hot water and a solar photovoltaic system to assist the HVAC units are also proposed. Heat transfer principles are used for modelling the thermal response of the building to the environmental parameters and thermodynamic principles are used for modelling the behaviour of HVAC, solar thermal system and photovoltaic system. All the components of the heating loads were determined for one year period. The study reveals the capacity of the proposed systems to provide ventilation and thermal comfort with a global reduction of energy consumption of 71.6 %.

Use of regenerative energy sources and hydrogen technology 2006. Proceedings

International Nuclear Information System (INIS)

Lehmann, J.; Luschtinetz, T.

2006-01-01

This volume contains 25 contributions, which were held on the 13th symposium ''Use of regenerative energy sources and hydrogen technology'' in Stralsund (Germany). Separate documentation items analysing 16 of the contributions have been prepared for the ENERGY database

report on the french objectives of electricity consumption, produced from renewable energies sources and on the analysis of their realization

International Nuclear Information System (INIS)

2007-01-01

This report presents the french objectives of electricity, from renewable energies sources, internal consumption for the next ten years, as the analysis of their realization taking into account the climatic factors likely to change the realization of these objectives. It also discusses the adequacy of the actions to the national engagement in matter of climatic change. (A.L.B.)

Technology collaboration by means of an open source government

Science.gov (United States)

Berardi, Steven M.

2009-05-01

The idea of open source software originally began in the early 1980s, but it never gained widespread support until recently, largely due to the explosive growth of the Internet. Only the Internet has made this kind of concept possible, bringing together millions of software developers from around the world to pool their knowledge. The tremendous success of open source software has prompted many corporations to adopt the culture of open source and thus share information they previously held secret. The government, and specifically the Department of Defense (DoD), could also benefit from adopting an open source culture. In acquiring satellite systems, the DoD often builds walls between program offices, but installing doors between programs can promote collaboration and information sharing. This paper addresses the challenges and consequences of adopting an open source culture to facilitate technology collaboration for DoD space acquisitions. DISCLAIMER: The views presented here are the views of the author, and do not represent the views of the United States Government, United States Air Force, or the Missile Defense Agency.

137Cs - Brachytherapy sources : a technology scenario

International Nuclear Information System (INIS)

Varma, R.N.

2001-01-01

Cancer has emerged as one of the major cause of morbidity and mortality all over the world. India houses world's second largest population and registers 4-5 lakhs new cancer cases every year. Cancer of cervix is most common form of malignancy among Indian women. Radiation therapy, especially intracavity brachytherapy in conjunction with other modalities like surgery, chemotherapy has been found to be highly effective for the management and control of cervical carcinoma at all stages. A technology has been developed indigenously for the fabrication of 137 Cs sources for brachytherapy applications

Chlorinated volatile organic compounds (Cl-VOCs) in environment - sources, potential human health impacts, and current remediation technologies.

Science.gov (United States)

Huang, Binbin; Lei, Chao; Wei, Chaohai; Zeng, Guangming

2014-10-01

Chlorinated volatile organic compounds (Cl-VOCs), including polychloromethanes, polychloroethanes and polychloroethylenes, are widely used as solvents, degreasing agents and a variety of commercial products. These compounds belong to a group of ubiquitous contaminants that can be found in contaminated soil, air and any kind of fluvial mediums such as groundwater, rivers and lakes. This review presents a summary of the research concerning the production levels and sources of Cl-VOCs, their potential impacts on human health as well as state-of-the-art remediation technologies. Important sources of Cl-VOCs principally include the emissions from industrial processes, the consumption of Cl-VOC-containing products, the disinfection process, as well as improper storage and disposal methods. Human exposure to Cl-VOCs can occur through different routes, including ingestion, inhalation and dermal contact. The toxicological impacts of these compounds have been carefully assessed, and the results demonstrate the potential associations of cancer incidence with exposure to Cl-VOCs. Most Cl-VOCs thus have been listed as priority pollutants by the Ministry of Environmental Protection (MEP) of China, Environmental Protection Agency of the U.S. (U.S. EPA) and European Commission (EC), and are under close monitor and strict control. Yet, more efforts will be put into the epidemiological studies for the risk of human exposure to Cl-VOCs and the exposure level measurements in contaminated sites in the future. State-of-the-art remediation technologies for Cl-VOCs employ non-destructive methods and destructive methods (e.g. thermal incineration, phytoremediation, biodegradation, advanced oxidation processes (AOPs) and reductive dechlorination), whose advantages, drawbacks and future developments are thoroughly discussed in the later sections. Copyright © 2014 Elsevier Ltd. All rights reserved.

Output, renewable energy consumption and trade in Africa

International Nuclear Information System (INIS)

Ben Aïssa, Mohamed Safouane; Ben Jebli, Mehdi; Ben Youssef, Slim

2014-01-01

We use panel cointegration techniques to examine the relationship between renewable energy consumption, trade and output in a sample of 11 African countries covering the period 1980–2008. The results from panel error correction model reveal that there is evidence of a bidirectional causality between output and exports and between output and imports in both the short and long-run. However, in the short-run, there is no evidence of causality between output and renewable energy consumption and between trade (exports or imports) and renewable energy consumption. Also, in the long-run, there is no causality running from output or trade to renewable energy. In the long-run, our estimations show that renewable energy consumption and trade have a statistically significant and positive impact on output. Our energy policy recommendations are that national authorities should design appropriate fiscal incentives to encourage the use of renewable energies, create more regional economic integration for renewable energy technologies, and encourage trade openness because of its positive impact on technology transfer and on output. - Highlights: • We examine the relationship between renewable energy consumption, trade and output in African countries. • There is a bidirectional causality between output and trade in both the short and long-run. • In the short-run, there is no causality between renewable energy consumption and trade or output. • In the long-run, renewable energy consumption and trade have a statistically significant positive impact on output. • African authorities should encourage trade openness because of its positive impact on technology transfer and on output

Does FDI influence renewable energy consumption? An analysis of sectoral FDI impact on renewable and non-renewable industrial energy consumption

International Nuclear Information System (INIS)

Doytch, Nadia; Narayan, Seema

2016-01-01

This study examines the link between foreign direct investment (FDI) and energy demand. FDI is a source of financing that allows businesses to grow. At the same time, FDI can be a source of innovation that promotes energy efficiency. Existing evidence on the impact of aggregate FDI inflows on energy consumption is scarce and inconclusive. In the current study, we disaggregate FDI inflows into mining, manufacturing, total services, and financial services components and examine the impact of these FDI flows on renewable – and non-renewable industrial energy – sources for 74 countries for the period 1985–2012. We employ a Blundell–Bond dynamic panel estimator to control for endogeneity and omitted variable biases in our panels. The results point broadly to an energy consumption-reducing effect with respect to non-renewable sources of energy and an energy consumption-augmenting effects with respect to renewable energy. We find that these effects vary in magnitude and significance by sectoral FDI. - Highlights: • FDI generally discourages the use of unclean energy. • Economic growth promotes non-renewable energy consumption. • Service FDI save energy and encourage the switch to renewable energy. • Mining FDI to low and lower middle-income panels save energy. • These results are mainly consistent with the FDI halo effect.

AquaResp® — free open-source software for measuring oxygen consumption of resting aquatic animals

DEFF Research Database (Denmark)

Svendsen, Morten Bo S.; Skov, Peter Vilhelm; Bushnell, Peter G.

AquaResp® is a free open-source software program developed to measure the oxygen consumption of aquatic animals using intermittent flow techniques. This free program is based on Microsoft Excel, and uses the MCC Universal Library and a data acquisition board to acquire analogue readings from up...... to four input ports and output control via two digital and two analogue ports. In addition AquaResp can read one COM-port if the oxygen analyser has a RS-232 output signal. The present version of the program has options for parsing data strings generated by two major fibre optic oxygen electrode...

Household electricity and gas consumption for heating homes

International Nuclear Information System (INIS)

Jeong, Jaehoon; Seob Kim, Chang; Lee, Jongsu

2011-01-01

Energy consumption has been drastically changed because of energy source depletion, price fluctuations, development and penetration of alternative energy sources, and government policies. Household energy sources are interrelated, and energy price and household characteristics, such as income level and dwelling size, affect the usage. To supply energy consistently and achieve a balance between production and consumption, stakeholders must understand consumer energy-consumption behavior. Therefore, this study identifies household heating energy usage patterns and the substitutive and/or complementary relationships between electricity and gas. Based on a multiple discrete-continuous extreme value model, household utility structure is identified from data on gas-heating usage. Results show greater utility and the smallest satiation values for gas boilers than for electric heaters and electric heating beds. The effects of consumer socioeconomic and environmental characteristics on the choice of heating energy sources were analyzed. Also, for further comparison, the respondents were split into high and low categories for income, heating degree days, dwelling size, and gas usage. Gas was found to be the most economical heating choice for households. - Research highlights: → This study investigates household electricity and gas consumption behavior for heating. → It also studied the relationship between two energy sources. → A research framework is suggested by combining the CDA and the MDCEV models. → It provides quantitative data that might be used for designing efficient energy policies.

An Analysis of Sources of Technological Change in Efficiency Improvement of Fluorescent Lamp Systems

Science.gov (United States)

Imanaka, Takeo

In Japan, energy efficient fluorescent lamp systems which use “rare-earth phosphors” and “electronic ballasts” have shown rapid diffusion since 1990s. This report investigated sources of technological change in the efficiency improvement of fluorescent lamp systems: (i) Fluorescent lamp and luminaires have been under steady technological development for getting more energy efficient lighting and the concepts to achieve high efficiency had been found in such activities; however, it took long time until they realized and become widely used; (ii) Electronic ballasts and rare-earth phosphors add fluorescent lamp systems not only energy efficiency but also various values such as compactness, lightweight, higher output, and better color rendering properties, which have also been expected and have induced research and development (R&D) (iii) Affordable electronic ballasts are realized by the new technology “power MOSFET” which is based on IC technologies and has been developed for large markets of information and communication technologies and mobile devices; and (iv) Rare-earth phosphors became available after rare-earth industries developed for the purpose of supplying rare-earth phosphors for color television. In terms of sources of technological change, (i) corresponds to “R&D” aiming at the particular purpose i.e. energy efficiency in this case, on the other hand, (ii), (iii), and (iv) correspond to “spillovers” from activities aiming at other purposes. This case exhibits an actual example in which “spillovers” were the critical sources of technological change in energy technology.

Energy consumption in France's industry. Conjuncture note

International Nuclear Information System (INIS)

2015-04-01

Energy consumption in the industry represents today 1/5 of France's end-use energy consumption. Gas and electricity are the most consumed and represent 2/3 of the overall. The 5 most energy consuming industries are the following: paper and cardboard industry, food industry, rubber, plastic and other non-metallic mineral products industry, metallurgy and chemical industry. The reduction of the industry's energy consumption is explained by the decline of production, but above all by the energy efficiency improvement of the sector. Technological innovations in production means have indeed led to reduce energy consumption

Analysis of application of “Power to Gas” technology in Bosnia and Herzegovina

Directory of Open Access Journals (Sweden)

Amila Ajdinovic

2016-11-01

Full Text Available Significant use of renewable energy sources (RES for production of electrical energy causes issues related to balancing between production and consumption. One of the possibilities for balancing production and consumption of electrical energy is the “Power to Gas” technology (PtG. PtG is a technology for methanation of hydrogen by carbon from carbondioxide using surplus of power from a grid. Analysis of PtG application in Bosnia and Herzegovina is described in this paper. The results showed that after deployment of major part of wind and minor part of solar potential, optimal capacity of PtG would be 150 MW.

Dematerialisation of consumption: a win-win strategy?

OpenAIRE

Kronenberg, Tobias

2010-01-01

A dematerialisation of the economy can provide a crucial contribution toward sustainable devel-opment. It can take place in the production sphere through technological change or in the con-sumption sphere through altered consumer behaviour. This paper focuses on the second case, a shift of expenditure from material consumption (e.g. manufactured products) to non-material consumption (e.g. services). Since all production requires material, an input-output model is used to account for indirect ...

Manufacturing consumption of energy 1991

Energy Technology Data Exchange (ETDEWEB)

1994-12-01

This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

Optimal sizing of a multi-source energy plant for power heat and cooling generation

International Nuclear Information System (INIS)

Barbieri, E.S.; Dai, Y.J.; Morini, M.; Pinelli, M.; Spina, P.R.; Sun, P.; Wang, R.Z.

2014-01-01

Multi-source systems for the fulfilment of electric, thermal and cooling demand of a building can be based on different technologies (e.g. solar photovoltaic, solar heating, cogeneration, heat pump, absorption chiller) which use renewable, partially renewable and fossil energy sources. Therefore, one of the main issues of these kinds of multi-source systems is to find the appropriate size of each technology. Moreover, building energy demands depend on the climate in which the building is located and on the characteristics of the building envelope, which also influence the optimal sizing. This paper presents an analysis of the effect of different climatic scenarios on the multi-source energy plant sizing. For this purpose a model has been developed and has been implemented in the Matlab ® environment. The model takes into consideration the load profiles for electricity, heating and cooling for a whole year. The performance of the energy systems are modelled through a systemic approach. The optimal sizing of the different technologies composing the multi-source energy plant is investigated by using a genetic algorithm, with the goal of minimizing the primary energy consumption only, since the cost of technologies and, in particular, the actual tariff and incentive scenarios depend on the specific country. Moreover economic considerations may lead to inadequate solutions in terms of primary energy consumption. As a case study, the Sino-Italian Green Energy Laboratory of the Shanghai Jiao Tong University has been hypothetically located in five cities in different climatic zones. The load profiles are calculated by means of a TRNSYS ® model. Results show that the optimal load allocation and component sizing are strictly related to climatic data (e.g. external air temperature and solar radiation)

Exploring heroin consumption

NARCIS (Netherlands)

Trautmann, Franz; Frijns, Tom

2013-01-01

In this report we explore some aspects of heroin consumption, using the data we collected through the face-to-face interviews and comparing our findings with data from other research and monitoring sources. We focus on Italy, the Netherlands and England, the three sample Member States where we have

Wind power - a power source now enabled by power electronics

DEFF Research Database (Denmark)

Blaabjerg, Frede; Iov, Florin

2007-01-01

energy at the end-user should be set up. Deregulation of energy has lowered the investment in larger power plants, which means the need for new electrical power sources may be increased in the near future. Two major technologies will play important roles to solve the future problems. One is to change......The global electrical energy consumption is still rising and there is a steady demand to increase the power capacity. It is expected that it has to be doubled within 20 years. The production, distribution and use of the energy should be as technological efficient as possible and incentives to save...... the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss the most emerging...

Do investment-specific technological changes matter for business fluctuations? Evidence from Japan

OpenAIRE

Hirose, Yasuo; Kurozumi, Takushi

2011-01-01

The observed decline in the relative price of investment goods to consumption goods in Japan suggests the existence of investment-specific technological (IST) changes. We examine whether IST changes are a major source of business fluctuations in Japan, by estimating a dynamic stochastic general equilibrium model with Bayesian methods. We show that IST changes are less important than neutral technological changes in explaining output fluctuations. We also demonstrate that investment fluctuatio...

Energy consumptions and information and communication technologies (ICT) in the tertiary sector in France; Consommations d'energie et technologies de l'information et des communications (TIC) dans le secteur tertiaire en France

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-01-01

In France, investment expenses in information and communication technologies (ICT) reached 162 billions of French francs in 1999 with an average annual growth of 13.3% during the 1989-1999 era. In parallel, the end-use energy consumption reached 212 Mtep in 1999 with an average annual growth of 1.55% during the same period. The introduction and spreading of computer equipments and softwares in offices is one possible explanation to this evolution. This study uses the data available for the tertiary sector to model and quantify the impact of ICTs development on the electricity consumption in this sector and draws out some consumption forecasts according to different hypotheses. (J.S.)

Key composition optimization of meat processed protein source by vacuum freeze-drying technology.

Science.gov (United States)

Ma, Yan; Wu, Xingzhuang; Zhang, Qi; Giovanni, Vigna; Meng, Xianjun

2018-05-01

Vacuum freeze-drying technology is a high technology content, a wide range of knowledge of technology in the field of drying technology is involved, it is also a method of the most complex drying equipment, the largest energy consumption, the highest cost of drying method, but due to the particularity of its dry goods: the freeze-drying food has the advantages of complex water performance is good, cooler and luster of freezing and drying food to maintain good products, less nutrient loss, light weight, easy to carry transportation, easy to long-term preservation, and on the quality is far superior to the obvious advantages of other dried food, making it become the forefront of drying technology research and development. The freeze-drying process of Chinese style ham and western Germany fruit tree tenderloin is studied in this paper, their eutectic point, melting point and collapse temperature, freeze-drying curve and its heat and mass transfer characteristics are got, then the precool temperature and the highest limiting temperature of sublimation interface are determined. The effect of system pressure on freeze-dried rate in freeze-drying process is discussed, and the method of regulating pressure circularly is determined.

Defining a land boundary for sustainable livestock consumption.

Science.gov (United States)

Van Zanten, Hannah H E; Herrero, Mario; Hal, Ollie Van; Röös, Elin; Muller, Adrian; Garnett, Tara; Gerber, Pierre J; Schader, Christian; De Boer, Imke J M

2018-05-22

The need for more sustainable production and consumption of animal-source food is central to the achievement of the sustainable development goals: within this context, wise use of land is a core challenge and concern. A key question in feeding the future world is: how much animal-source food should we eat? We demonstrate that livestock raised under the circular economy concept could provide a significant, non-negligible part (9-23g/per capita) of our daily protein needs (~50-60 g/per capita). This livestock then would not consume human-edible biomass, such as grains, but mainly convert leftovers from arable land and grass resources into valuable food, implying that production of livestock feed is largely decoupled from arable land. The availability of these biomass streams for livestock then determines the boundaries for livestock production and consumption. Under this concept, the competition for land for feed or food would be minimized and compared to no animal-source food, including some animal-source food in the human diet could free up about one quarter of global arable land. Our results also demonstrate that restricted growth in consumption of animal-source food in Africa and Asia would be feasible under these boundary conditions, while reductions in the rest of the world would be necessary to meet land use sustainability criteria. Managing this expansion and contraction of future consumption of animal-source food is essential for achieving sustainable nutrition security. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

What can information technology do for environmental protection?

International Nuclear Information System (INIS)

Trauboth, H.

1987-01-01

Information technology plays an important role in the accomplishment of an effective environmental protection. Prerequisite for its comprehensive implementation is the legal and economic achievement of closed material cycles for supply and waste discharge in production and consumption as well as in nuclear technology. Modern information processing may be used for the inventory of natural and emission sources, to gain knowledge on the functioning mechanisms of nature, for the planning of a considerate exploitation of natural recources and for the ecology-oriented monitoring and control of industrial plants. The state of the art of the corresponding information technology and new areas of research especially in measurement technology are shown. The breadth of the great opportunities of information technology for environmental protection is discribed. (orig.) [de

Using Deep Learning Techniques to Forecast Environmental Consumption Level

Directory of Open Access Journals (Sweden)

Donghyun Lee

2017-10-01

Full Text Available Artificial intelligence is a promising futuristic concept in the field of science and technology, and is widely used in new industries. The deep-learning technology leads to performance enhancement and generalization of artificial intelligence technology. The global leader in the field of information technology has declared its intention to utilize the deep-learning technology to solve environmental problems such as climate change, but few environmental applications have so far been developed. This study uses deep-learning technologies in the environmental field to predict the status of pro-environmental consumption. We predicted the pro-environmental consumption index based on Google search query data, using a recurrent neural network (RNN model. To verify the accuracy of the index, we compared the prediction accuracy of the RNN model with that of the ordinary least square and artificial neural network models. The RNN model predicts the pro-environmental consumption index better than any other model. We expect the RNN model to perform still better in a big data environment because the deep-learning technologies would be increasingly sophisticated as the volume of data grows. Moreover, the framework of this study could be useful in environmental forecasting to prevent damage caused by climate change.

Open-source digital technologies for low-cost monitoring of historical constructions

OpenAIRE

Basto, Camilo; Pelà, Luca; Chacón Flores, Rolando Antonio

2017-01-01

This paper shows new possibilities of using novel, open-source, low-cost platforms for the structural health monitoring of heritage structures. The objective of the study is to present an assessment of increasingly available open-source digital modeling and fabrication technologies in order to identify the suitable counterparts of the typical components of a continuous static monitoring system for a historical construction. The results of the research include a simple case-study, which is pre...

Shifting the balance: equity and sustainable consumption

Energy Technology Data Exchange (ETDEWEB)

Vermeulen, Sonja; Garside, Ben; De Morais, Gabriela Weber

2009-01-15

On our finite planet, the dictates of ecology and technology limit growth. Yet a key element of this issue – consumption – has until recently hardly figured on policy agendas. Now there is growing recognition that transformation towards a low-carbon, resource-efficient economy means tackling consumption as well as production. Governments and businesses are beginning to make concerted, if uncoordinated, efforts to reduce energy and resource use. Rethinking consumption could, however, drive an even bigger wedge between rich and poor. Any new agenda for consumption needs to factor in equity as well as environmental benefit.

Marketing technology in macroeconomics.

Science.gov (United States)

Tamegawa, Kenichi

2012-01-01

In this paper, we incorporate a marketing technology into a dynamic stochastic general equilibrium model by assuming a matching friction for consumption. An improvement in matching can be interpreted as an increase in matching technology, which we call marketing technology because of similar properties. Using a simulation analysis, we confirm that a positive matching technology shock can increase output and consumption.

Responsible Consumption – Source of Competitive Advantages and Solution for Tourist Protection

Directory of Open Access Journals (Sweden)

Gheorghe Epuran

2017-05-01

Full Text Available The recent preoccupations of national institutions and organizations and, especially of European and global institutions, regarding the responsible consumption of raw materials, resources and materials became more and more intense in the last years. In the same time, they contribute to the creation of a mentality of equilibrium in consumption and among consumers. With no connection with the area of activity, the XXIst century companies make real efforts to obtain competitive advantages by a consequent implementation of social responsibility, by assuring a responsible consumption in all the processes, and by protecting the consumer interests and rights. It became more and more frequent for the companies from tourism industry to apply the principles of sustainable development and to follow a strategy of responsible consumption. Their efforts are focused on providing different and unique experiences to contemporary consumer. In this way, the responsible consumption becomes not only a competitive advantage, but, also, an efficient way of informing the tourists and protecting their interests and rights. Without having a well-determined “ideological motivation”, tourists become more careful in responsible selection of services, depending on their degree of sustainability. They choose those touristic services that have a big contribution at the environment protection and preservation, respectively that integrate in a harmonious and synergic way cultural, psycho-social and emotional considerations. The institutions that regulate the touristic services supply contribute, also, at the careful monitoring of messages submitted to tourists and the messages content. To measure the way that the rural tourist guesthouses from Romania base their actions on the responsible consumption of raw materials and resources in their strategies of approaching the market and attracting tourists, in order to get sustainable competitive advantages and to offer efficient

Energy consumptions per sector; Les consommations d'energie par secteur

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This document presents the energy consumption data of France per energy type and sector of use in the form of tables and graphics for the last decade and sometimes before: 1 - residential and tertiary sector: energy consumption per energy source, energy consumption per use (coal, heavy and domestic fuels, natural gas, LPG (butane, propane), electricity), comparison of the share of each energy source between 1973 and 2003, 20 years of space heating data in main dwellings (1982-2002), district heating networks from 1987 to 1997; 2 - transportation sector: fuel consumption of individual cars in France (1990-2003, 1990-2002, 1990-2001, 1987-1999), some indicators about the energy consumption in transports in France (2000-2001); 3 - industry sector: consumption of fuel substitutes in the cement industry in 2001, importance and limitations. (J.S.)

Electricity and Water Supply Consumption and Greenhouse Gas Emission at the Office of the Faculty of Science and Technology, Suan Sunandha Rajabhat University

Directory of Open Access Journals (Sweden)

Ronbanchob Apiratikul

2015-07-01

Full Text Available This work was a data collection of electricity and water supply consumption of the Dean’s Office of the Faculty of Science and Technology, Suan Sunandha Rajabhat University, Thailand. The greenhouse gas emissions from electricity and water supply consumptions were calculated using the up-to-date emission factor from the Thailand Greenhouse Gas Management Organization (TGO database. In average, the office consumes 1.045 m3 /d and 87.9 kWh/d of water and electricity, respectively. This is equal to 68.5 Liter per person (11.25 L/m2 and 4.1 kWh per person (0.6788 kWh /m2 for the daily water supply and electricity consumptions, respectively. The total daily greenhouse gas emission from both electricity and water supply consumption is 59.01 kg-CO2 eq. which is mainly came from the electricity consumption (≈ 98%. The average emission based on people and area are 2.566 kg-CO2 eq per person and 0.422 kg-CO2/m2 , respectively.

BIOGAS AS AN ALTERNATIVE ENERGY SOURCE TO PROMOTE INDIGENOUS COMMUNITIES DEVELOPMENT

Directory of Open Access Journals (Sweden)

Carlos SABORÍO VÍQUEZ

2013-01-01

Full Text Available The key areas that determine the food and nutrition security are: availability, access, consumption and biological utilization. For this reason it is necessary to promote the health of vulnerable groups, in this case, indigenous communities, protecting and establishing conditions to ensure the human right to food. The initial plan focuses ondeveloping facilities for small swine and poultry farms, familiar, non-commercial. The main objective of the pigs raised at the site will be the production of animal waste in order to implement digesters for the production of biogas as an alternative energy source, the production of meat stays in the background, thinking only about the community consumption and helping to ensure their food source, from this perspective, the technologies applied to rural and indigenous progress are environmentally friendly, socially just, economically viable and culturally acceptable. The theme of rural and indigenous Development is focused on their food security and the use of alternative energies, considering that energy is a key element in achieving sustainable development in all sectors, therefore sought from a broad perspective solidarity and actively promote greater and more rational use of energy and the environment in remote communities, through diversification of supply sources and efficient use, thereby contributing toenvironmental conservation and reduction of health problems through the use of appropriate technologies.

Towards harmonized data interchange in food consumption data

DEFF Research Database (Denmark)

Pakkala, H.; Christensen, Tue; Presser, K.

2014-01-01

Food consumption data are collected and used in several fields of science. The data are often combined from various sources and interchanged between different systems. There is, however, no harmonized and widely used data interchange format. In addition, food consumption data are often combined w...... interchange format for food consumption based on work and experiences related to food composition.The aim is that the data interchange format will provide a basis for wider harmonization in the future.......Food consumption data are collected and used in several fields of science. The data are often combined from various sources and interchanged between different systems. There is, however, no harmonized and widely used data interchange format. In addition, food consumption data are often combined...... with other data such as food composition data. In the field of food composition, successful harmonization has recently been achieved by the European Food Information Resource Network, which is now the basis of a standard draft by the European Committee for Standardization. We present an XML-based data...

Technological Decision to Renewable Energy Usage Biogas for Off-grid Systems Consumption

Directory of Open Access Journals (Sweden)

Zubkova Marina

2016-01-01

Full Text Available This paper presents the results of the energy experiments based on electrochemical researches and the thermodynamic calculations, which are carried out on the hydrogenous fuel with the residual content of methane obtained from biogas selected organic waste. Energy indicators are examined in comparison to electrolysis hydrogen. The use of technical and electro physical indicators together with parameters of the fuel operating allowed assessing energy efficiency the module reformer - fuel cell running on a non-standard hydrogenous fuel. Numerical characteristic the efficiency of workflows fuel system reformer – fuel cell is about 39%. To operate the power installation with a predetermined capacity amount used of hydrogenous fuel is comparable to required electrolysis hydrogen amount. Shown the possibility of creation the systems of power supply based on new hydrogen technologies using renewable energy resources local waste. Confirms the relatively high efficiency the usage of hydrogenous fuel for the tasks of off-grid systems consumption.

Essentials of energy technology sources, transport, storage, conservation

CERN Document Server

Fricke, Jochen

2013-01-01

An in-depth understanding of energy technology, sources, conversion, storage, transport and conservation is crucial for developing a sustainable and economically viable energy infrastructure. This need, for example, is addressed in university courses with a special focus on the energy mix of renewable and depletable energy resources. Energy makes our lives comfortable, and the existence of amenities such as heaters, cars, warm water, household appliances and electrical light is characteristic for a developed economy. Supplying the industrial or individual energy consumer with energy 24 hours

The Stickiness of Aggregate Consumption Growth in OECD Countries: A Panel Data Analysis

NARCIS (Netherlands)

G. Everaert (Gerdie); L.C.G. Pozzi (Lorenzo)

2010-01-01

textabstractThis paper examines the sources of stickiness in aggregate consumption growth. We first derive a dynamic consumption equation which nests recent developments in consumption theory: rule-of-thumb consumption, habit formation, non-separabilities between both private consumption and hours

Energy consumption and income. A semiparametric panel data analysis

Energy Technology Data Exchange (ETDEWEB)

Nguyen-Van, Phu [BETA, CNRS and Universite de Strasbourg, 61 avenue de la Foret Noire, F-67085 Strasbourg (France)

2010-05-15

This paper proposes a semiparametric analysis for the study of the relationship between energy consumption per capita and income per capita for an international panel dataset. It shows little evidence for the existence of an environmental Kuznets curve for energy consumption. Energy consumption increases with income for a majority of countries and then stabilizes for very high income countries. Neither changes in energy structure nor macroeconomic cycle/technological change have significant effect on energy consumption. (author)

Key composition optimization of meat processed protein source by vacuum freeze-drying technology

Directory of Open Access Journals (Sweden)

Yan Ma

2018-05-01

Full Text Available Vacuum freeze-drying technology is a high technology content, a wide range of knowledge of technology in the field of drying technology is involved, it is also a method of the most complex drying equipment, the largest energy consumption, the highest cost of drying method, but due to the particularity of its dry goods: the freeze-drying food has the advantages of complex water performance is good, cooler and luster of freezing and drying food to maintain good products, less nutrient loss, light weight, easy to carry transportation, easy to long-term preservation, and on the quality is far superior to the obvious advantages of other dried food, making it become the forefront of drying technology research and development. The freeze-drying process of Chinese style ham and western Germany fruit tree tenderloin is studied in this paper, their eutectic point, melting point and collapse temperature, freeze-drying curve and its heat and mass transfer characteristics are got, then the precool temperature and the highest limiting temperature of sublimation interface are determined. The effect of system pressure on freeze-dried rate in freeze-drying process is discussed, and the method of regulating pressure circularly is determined. Keywords: Ham, Tenderloin, Vacuum freeze-dry, Processing, Optimization

Enabling instrumentation and technology for 21st century light sources

Energy Technology Data Exchange (ETDEWEB)

Byrd, J.M.; Shea, T.J.; Denes, P.; Siddons, P.; Attwood, D.; Kaertner, F.; Moog, L.; Li, Y.; Sakdinawat, A.; Schlueter, R.

2010-06-01

We present the summary from the Accelerator Instrumentation and Technology working group, one of the five working groups that participated in the BES-sponsored Workshop on Accelerator Physics of Future Light Sources held in Gaithersburg, MD September 15-17, 2009. We describe progress and potential in three areas: attosecond instrumentation, photon detectors for user experiments, and insertion devices.

What makes Chinese firms to choose international external technology sources? An inquiry on internationalization, innovation and institutions

DEFF Research Database (Denmark)

Li-Ying, Jason; Wang, Yuandi

2013-01-01

. However, we have also witnessed an emerging trend of external acquisition of technology by EMFs firms in both international and domestic markets. Why some EMFs are active in sourcing both domestic and international technologies instead of being significantly in favour of foreign technologies from...... framework. Based on a unique sample of 389 Chinese firms on their inward technology licensing activities through an observation period from 2000 to 2005, it is found that (1) firms’ international market orientation; (2) firm’s technological capability; (3) regional innovation capability; and (4......External technology sourcing from developed countries has been one of the most important vehicles by which emerging market firms (EMFs) sustain competiveness. Foreign advanced technologies offer EMFs opportunities to gain access to state-of-the-art technologies and upgrade their competitiveness...

Sugar sweetened beverage consumption by Australian children: Implications for public health strategy

Directory of Open Access Journals (Sweden)

Hafekost Katherine

2011-12-01

Full Text Available Abstract Background High consumption of sugar sweetened beverages (SSBs has been linked to unhealthy weight gain and nutrition related chronic disease. Intake of SSB among children remains high in spite of public health efforts to reduce consumption, including restrictions on marketing to children and limitations on the sale of these products in many schools. Much extant literature on Australian SSB consumption is out-dated and lacks information on several key issues. We sought to address this using a contemporary Australian dataset to examine purchase source, consumption pattern, dietary factors, and demographic profile of SSB consumption in children. Methods Data were from the 2007 Australian National Children's Nutrition and Physical Activity Survey, a representative random sample of 4,834 Australian children aged 2-16 years. Mean SSB intake by type, location and source was calculated and logistic regression models were fitted to determine factors associated with different levels of consumption. Results SSB consumption was high and age-associated differences in patterns of consumption were evident. Over 77% of SSB consumed was purchased via supermarkets and 60% of all SSB was consumed in the home environment. Less than 17% of SSB was sourced from school canteens and fast food establishments. Children whose parents had lower levels of education consumed more SSB on average, while children whose parents had higher education levels were more likely to favour sweetened juices and flavoured milks. Conclusions SSB intake by Australian children remains high and warrants continued public health attention. Evidence based and age-targeted interventions, which also recognise supermarkets as the primary source of SSB, are recommended to reduce SSB consumption among children. Additionally, education of parents and children regarding the health consequences of high consumption of both carbonated and non-carbonated SSBs is required.

Sugar sweetened beverage consumption by Australian children: implications for public health strategy.

Science.gov (United States)

Hafekost, Katherine; Mitrou, Francis; Lawrence, David; Zubrick, Stephen R

2011-12-22

High consumption of sugar sweetened beverages (SSBs) has been linked to unhealthy weight gain and nutrition related chronic disease. Intake of SSB among children remains high in spite of public health efforts to reduce consumption, including restrictions on marketing to children and limitations on the sale of these products in many schools. Much extant literature on Australian SSB consumption is out-dated and lacks information on several key issues. We sought to address this using a contemporary Australian dataset to examine purchase source, consumption pattern, dietary factors, and demographic profile of SSB consumption in children. Data were from the 2007 Australian National Children's Nutrition and Physical Activity Survey, a representative random sample of 4,834 Australian children aged 2-16 years. Mean SSB intake by type, location and source was calculated and logistic regression models were fitted to determine factors associated with different levels of consumption. SSB consumption was high and age-associated differences in patterns of consumption were evident. Over 77% of SSB consumed was purchased via supermarkets and 60% of all SSB was consumed in the home environment. Less than 17% of SSB was sourced from school canteens and fast food establishments. Children whose parents had lower levels of education consumed more SSB on average, while children whose parents had higher education levels were more likely to favour sweetened juices and flavoured milks. SSB intake by Australian children remains high and warrants continued public health attention. Evidence based and age-targeted interventions, which also recognise supermarkets as the primary source of SSB, are recommended to reduce SSB consumption among children. Additionally, education of parents and children regarding the health consequences of high consumption of both carbonated and non-carbonated SSBs is required.

Identifying Sources of Children’s Consumption of Junk Food in Boston After-School Programs, April–May 2011

Science.gov (United States)

Austin, S. Bryn; Cradock, Angie L.; Giles, Catherine M.; Lee, Rebekka M.; Davison, Kirsten K.; Gortmaker, Steven L.

2014-01-01

Introduction Little is known about how the nutrition environment in after-school settings may affect children’s dietary intake. We measured the nutritional quality of after-school snacks provided by programs participating in the National School Lunch Program or the Child and Adult Care Food Program and compared them with snacks brought from home or purchased elsewhere (nonprogram snacks). We quantified the effect of nonprogram snacks on the dietary intake of children who also received program-provided snacks during after-school time. Our study objective was to determine how different sources of snacks affect children’s snack consumption in after-school settings. Methods We recorded snacks served to and brought in by 298 children in 18 after-school programs in Boston, Massachusetts, on 5 program days in April and May 2011. We measured children’s snack consumption on 2 program days using a validated observation protocol. We then calculated within-child change-in-change models to estimate the effect of nonprogram snacks on children’s dietary intake after school. Results Nonprogram snacks contained more sugary beverages and candy than program-provided snacks. Having a nonprogram snack was associated with significantly higher consumption of total calories (+114.7 kcal, P snack period. Conclusion On days when children brought their own after-school snack, they consumed more salty and sugary foods and nearly twice as many calories than on days when they consumed only program-provided snacks. Policy strategies limiting nonprogram snacks or setting nutritional standards for them in after-school settings should be explored further as a way to promote child health. PMID:25412028

Optimization of energy consumption and cost effectiveness of modular buildings by using renewable energy sources

Directory of Open Access Journals (Sweden)

Peter Tauš

2015-10-01

Full Text Available Problems of the temporary structures are generally dealt with by the use of modular buildings. These actually meet the terms of low costs, as appose to the terms of convenience of use, or energy efficiency in operation. Using the latest technologies in the production of the modular buildings has improved the operation sufficiently; it is now possible to use them entirely for purposes associated with the use of the buildings. Office buildings, warehouses, and conference rooms have become common standard. In Slovakia, we can already see it as a normal part of cities and municipalities: social housing, schools, and kindergartens, which were all built using this technology. During the assessment phase of these buildings, energy efficiency is always the priority. This article is aimed at establishing the economic potential of modular buildings in the field of use of renewable energy sources. For the formulation of the problem and the definition of borders of studied parameters, we proposed a four-dimensional competency decision-making space. This determines the examination process that should identify areas in which it is appropriate to consider and assess the use of renewable energy sources.

PHARAO laser source flight model: Design and performances

Energy Technology Data Exchange (ETDEWEB)

Lévèque, T., E-mail: thomas.leveque@cnes.fr; Faure, B.; Esnault, F. X.; Delaroche, C.; Massonnet, D.; Grosjean, O.; Buffe, F.; Torresi, P. [Centre National d’Etudes Spatiales, 18 avenue Edouard Belin, 31400 Toulouse (France); Bomer, T.; Pichon, A.; Béraud, P.; Lelay, J. P.; Thomin, S. [Sodern, 20 Avenue Descartes, 94451 Limeil-Brévannes (France); Laurent, Ph. [LNE-SYRTE, CNRS, UPMC, Observatoire de Paris, 61 avenue de l’Observatoire, 75014 Paris (France)

2015-03-15

In this paper, we describe the design and the main performances of the PHARAO laser source flight model. PHARAO is a laser cooled cesium clock specially designed for operation in space and the laser source is one of the main sub-systems. The flight model presented in this work is the first remote-controlled laser system designed for spaceborne cold atom manipulation. The main challenges arise from mechanical compatibility with space constraints, which impose a high level of compactness, a low electric power consumption, a wide range of operating temperature, and a vacuum environment. We describe the main functions of the laser source and give an overview of the main technologies developed for this instrument. We present some results of the qualification process. The characteristics of the laser source flight model, and their impact on the clock performances, have been verified in operational conditions.

78 FR 60700 - Source Specific Federal Implementation Plan for Implementing Best Available Retrofit Technology...

Science.gov (United States)

2013-10-02

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 49 [EPA-R09-OAR-2013-0489; FRL-9901-58-Region 9] Source Specific Federal Implementation Plan for Implementing Best Available Retrofit Technology for Four... Plan (FIP) to implement the Best Available Retrofit Technology (BART) requirement of the Regional Haze...

78 FR 41731 - Source Specific Federal Implementation Plan for Implementing Best Available Retrofit Technology...

Science.gov (United States)

2013-07-11

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 49 [EPA-R09-OAR-2013-0489; FRL-9830-5] Source Specific Federal Implementation Plan for Implementing Best Available Retrofit Technology for Four Corners Power... Implementation Plan (FIP) to implement the Best Available Retrofit Technology (BART) requirement of the Regional...

Diesel Consumption of Agriculture in China

Directory of Open Access Journals (Sweden)

Shusen Gui

2012-12-01

Full Text Available As agricultural mechanization accelerates the development of agriculture in China, to control the growth of the resulting energy consumption of mechanized agriculture without negatively affecting economic development has become a major challenge. A systematic analysis of the factors (total power, unit diesel consumption, etc. influencing diesel consumption using the SECA model, combined with simulations on agricultural diesel flows in China between 1996 and 2010 is performed in this work. Seven agricultural subsectors, fifteen categories of agricultural machinery and five farm operations are considered. The results show that farming and transportation are the two largest diesel consumers, accounting for 86.23% of the total diesel consumption in agriculture in 2010. Technological progress has led to a decrease in the unit diesel consumption and an increase in the unit productivity of all machinery, and there is still much potential for future progress. Additionally, the annual average working hours have decreased rapidly for most agricultural machinery, thereby influencing the development of mechanized agriculture.

Technology Roadmaps: Energy-efficient Buildings: Heating and Cooling Equipment

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

Buildings account for almost a third of final energy consumption globally and are an equally important source of CO2 emissions. Currently, both space heating and cooling as well as hot water are estimated to account for roughly half of global energy consumption in buildings. Energy-efficient and low/zero-carbon heating and cooling technologies for buildings have the potential to reduce CO2 emissions by up to 2 gigatonnes (Gt) and save 710 million tonnes oil equivalent (Mtoe) of energy by 2050. Most of these technologies -- which include solar thermal, combined heat and power (CHP), heat pumps and thermal energy storage -- are commercially available today. The Energy-Efficient Buildings: Heating and Cooling Equipment Roadmap sets out a detailed pathway for the evolution and deployment of the key underlying technologies. It finds that urgent action is required if the building stock of the future is to consume less energy and result in lower CO2 emissions. The roadmap concludes with a set of near-term actions that stakeholders will need to take to achieve the roadmap's vision.

Identifying sources of children's consumption of junk food in Boston after-school programs, April-May 2011.

Science.gov (United States)

Kenney, Erica L; Austin, S Bryn; Cradock, Angie L; Giles, Catherine M; Lee, Rebekka M; Davison, Kirsten K; Gortmaker, Steven L

2014-11-20

Little is known about how the nutrition environment in after-school settings may affect children's dietary intake. We measured the nutritional quality of after-school snacks provided by programs participating in the National School Lunch Program or the Child and Adult Care Food Program and compared them with snacks brought from home or purchased elsewhere (nonprogram snacks). We quantified the effect of nonprogram snacks on the dietary intake of children who also received program-provided snacks during after-school time. Our study objective was to determine how different sources of snacks affect children's snack consumption in after-school settings. We recorded snacks served to and brought in by 298 children in 18 after-school programs in Boston, Massachusetts, on 5 program days in April and May 2011. We measured children's snack consumption on 2 program days using a validated observation protocol. We then calculated within-child change-in-change models to estimate the effect of nonprogram snacks on children's dietary intake after school. Nonprogram snacks contained more sugary beverages and candy than program-provided snacks. Having a nonprogram snack was associated with significantly higher consumption of total calories (+114.7 kcal, P < .001), sugar-sweetened beverages (+0.5 oz, P = .01), desserts (+0.3 servings, P < .001), and foods with added sugars (+0.5 servings; P < .001) during the snack period. On days when children brought their own after-school snack, they consumed more salty and sugary foods and nearly twice as many calories than on days when they consumed only program-provided snacks. Policy strategies limiting nonprogram snacks or setting nutritional standards for them in after-school settings should be explored further as a way to promote child health.

Food consumption changes in South Africa since 1994

Directory of Open Access Journals (Sweden)

Lisa-Claire Ronquest-Ross

2015-09-01

Full Text Available Food consumption patterns in South Africa have changed dramatically over the past decades and likely will continue to change over the coming decades. Various food-related studies conducted over the last few decades indicate that food consumption shifts in South Africa have been towards a more Westernorientated diet, with nutritional consequences contributing to increased obesity and other non-communicable diseases. Several sources of data may be used to examine patterns in food consumption over time. Each of these methods has its own merits depending on the desired outcome, but are difficult to compare as each measures different levels of dietary information. As a result of the lack of regular national or comparable food consumption data in South Africa, the objective of this study was to establish, through the use of databases (FAOSTAT food balance sheets and Euromonitor International Passport, the broad food and beverage consumption shifts in South Africa since 1994. Our findings indicate that food consumption shifts have been towards an overall increase in daily kilojoules consumed, a diet of sugar-sweetened beverages, an increase in the proportion of processed and packaged food including edible vegetable oils, increased intake of animal source foods, and added caloric sweeteners, and a shift away from vegetables. The largest shifts in food consumption were observed for soft drinks, sauces, dressings and condiments, sweet and savoury snacks, meat, and fats and oils. Convenience, health and nutrition, and indulgence were the main drivers of the increase in consumption of packaged foods and beverages. These shifts in food consumption are concerning as relates to their fat, sugar and salt composition and potential effect on public health.

Design and optimization of zero-energy-consumption based solar energy residential building systems

Science.gov (United States)

Zheng, D. L.; Yu, L. J.; Tan, H. W.

2017-11-01

Energy consumption of residential buildings has grown fast in recent years, thus raising a challenge on zero energy residential building (ZERB) systems, which aim at substantially reducing energy consumption of residential buildings. Thus, how to facilitate ZERB has become a hot but difficult topic. In the paper, we put forward the overall design principle of ZERB based on analysis of the systems’ energy demand. In particular, the architecture for both schematic design and passive technology is optimized and both energy simulation analysis and energy balancing analysis are implemented, followed by committing the selection of high-efficiency appliance and renewable energy sources for ZERB residential building. In addition, Chinese classical residential building has been investigated in the proposed case, in which several critical aspects such as building optimization, passive design, PV panel and HVAC system integrated with solar water heater, Phase change materials, natural ventilation, etc., have been taken into consideration.

Back to consumption and production?

DEFF Research Database (Denmark)

Bajde, Domen; Kos Koklic, Mateja; Bajde, Jernej

2015-01-01

of production and consumption. Yet, in response to the mounting commercial and legal pressures, Web 2.0 companies pro-actively regulate prosumption, deploying advanced technological devices and innovative contractual arrangements. Exploring the case of Warner Music Group lockdown on YouTube, we investigate...

NASA Fixed Wing Project Propulsion Research and Technology Development Activities to Reduce Thrust Specific Energy Consumption

Science.gov (United States)

Hathaway, Michael D.; DelRasario, Ruben; Madavan, Nateri K.

2013-01-01

This paper presents an overview of the propulsion research and technology portfolio of NASA Fundamental Aeronautics Program Fixed Wing Project. The research is aimed at significantly reducing the thrust specific fuel/energy consumption of notional advanced fixed wing aircraft (by 60 % relative to a baseline Boeing 737-800 aircraft with CFM56-7B engines) in the 2030-2035 time frame. The research investments described herein are aimed at improving propulsive efficiency through higher bypass ratio fans, improving thermal efficiency through compact high overall pressure ratio gas generators, and exploring the potential benefits of boundary layer ingestion propulsion and hybrid gas-electric propulsion concepts.

Technological substitution options for controlling greenhouse gas emissions

International Nuclear Information System (INIS)

Barbier, E.B.; Burgess, J.C.; Pearce, D.W.

1991-01-01

This chapter is concerned with technological options for greenhouse gas substitution. The authors interpret the term substitution to exclude energy conservation/efficiency measures, investments in afforestation (sinks), and greenhouse gas removal or abatement technologies. Their working definition of greenhouse gas substitution includes (1) replacement technologies, for example, substituting a greenhouse gas technology with a nongreenhouse gas technology; and (2) reduction technologies, for example, substituting a greenhouse gas technology with an alternative technology that reduces greenhouse gas emissions. Essentially, replacement technologies involve 100 percent reduction in CO 2 ; reduction technologies involve a partial reduction in CO 2 . Of the man-made sources of greenhouse gases, energy is the most important and is expected to contribute to at least half of the global warming effect in the near future. The majority of this impact is from fossil fuel combustion as a source of carbon dioxide (CO 2 ), although fossil fuels also contribute significantly to methane (CH 4 ), to nitrous oxide (N 2 O), and to low-level ozone (O 3 ) through production of various nitrogen gases (NO x ) and carbon monoxide (CO). This study analyzes the available greenhouse gas substitutions and their costs. The authors concentrate particularly on substitutions for fossil-fuel combustion and CFC production and consumption. They conclude by summarizing the potential for greenhouse gas substitution, the cost-effectiveness of the various options and the design of incentives for substitution

Web-Based Medical Service: Technology Attractiveness, Medical Creditability, Information Source, and Behavior Intention.

Science.gov (United States)

Wang, Shan Huei

2017-08-02

Web-based medical service (WBMS), a cooperative relationship between medical service and Internet technology, has been called one of the most innovative services of the 21st century. However, its business promotion and implementation in the medical industry have neither been expected nor executed. Few studies have explored this phenomenon from the viewpoint of inexperienced patients. The primary goal of this study was to explore whether technology attractiveness, medical creditability, and diversified medical information sources could increase users' behavior intention. This study explored the effectiveness of web-based medical service by using three situations to manipulate sources of medical information. A total of 150 questionnaires were collected from people who had never used WBMS before. Hierarchical regression was used to examine the mediation and moderated-mediation effects. Perceived ease of use (P=.002) and perceived usefulness (P=.001) significantly enhance behavior intentions. Medical credibility is a mediator (P=.03), but the relationship does not significantly differ under diverse manipulative information channels (P=.39). Medical credibility could explain the extra variation between technology attractiveness and behavior intention, but not significant under different moderating effect of medical information sources. ©Shan Huei Wang. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 02.08.2017.

Advanced transport aircraft technology

Energy Technology Data Exchange (ETDEWEB)

Winblade, R L

1980-06-01

Various elements of the NASA aircraft energy efficiency program are described. Regarding composite structures, the development of three secondary and three medium-primary components to validate structural and fabrication technology is discussed. In laminar flow control, the design of advanced airfoils having large regions of supercritical flow with features which simplify laminarization are considered. Emphasis is placed on engine performance improvement, directed at developing advanced components to reduce fuel consumption in current production engines, and engine diagnostics aimed at identifying the sources and causes of performance deterioration in high-bypass turbofan engines. In addition, the results of propeller aerodynamic and acoustic tests have substantiated the feasibility of achieving the propeller efficiency goal of 80% and confirmed that the effect of blade sweep on reducing propeller source noise was 5-6 dB.

Household's use of information and communication technologies

DEFF Research Database (Denmark)

Jensen, Jesper Ole; Gram-Hanssen, Kirsten; Røpke, Inge

2009-01-01

of theories of domestication of technologies, it is argued that aspects such as consumers' creativity in technology use and their non-adaption are relevant aspects to include in policy and regulation discussions on how to limit the escalating electricity consumption from household ICT use.......Increasing consumption of electricity due to a growing number of information and communication technology (ICT) appliances in households is a major challenge to reducing energy consumption. Several studies have predicted escalating ICT-related energy consumption, but relatively little has been said...... and done about possible initiatives to curb this increase. This paper presents results of a research project focusing on how dynamics of consumption influence household energy consumption on ICT. Results of the project include scenarios on how electricity consumption on ICT is expected to grow, suggesting...

Pornography Consumption, Perceptions of Pornography as Sexual Information, and Condom Use.

Science.gov (United States)

Wright, Paul J; Sun, Chyng; Steffen, Nicola

2018-04-10

Pornography use is becoming more commonplace and may be a modality by which individuals receive sex education. This survey study assessed pornography consumption, perceptions of pornography as a source of sexual information, and condom use in a heterosexual sample of 200 sexually active German adults who were not in monogamous relationships. At the bivariate, overall sample level, there was only a modest association between consuming pornography and a decreased frequency of condom use. However, consistent with the sexual script acquisition, activation, application model ( 3 AM) of sexual media socialization, this association was moderated by differential perceptions of pornography as a source of sexual information. Interaction decomposition revealed that there was no association between pornography consumption and condom use among participants who disagreed that pornography is a source of sexual information. Conversely, pornography consumption was associated with a lower frequency of condom use among participants who agreed that pornography is a source of sexual information. As the perception that pornography is a source of sexual information strengthened, the relationship between pornography consumption and less frequent condom use increased. Gender did not moderate these associations. These findings point toward the importance of fostering a critical reading of pornography through media literacy education.

Comparative analyses of seven technologies to facilitate the integration of fluctuating renewable energy sources

DEFF Research Database (Denmark)

Mathiesen, Brian Vad; Lund, Henrik

2009-01-01

An analysis of seven different technologies is presented. The technologies integrate fluctuating renewable energy sources (RES) such as wind power production into the electricity supply, and the Danish energy system is used as a case. Comprehensive hour-by-hour energy system analyses are conducted...... of a complete system meeting electricity, heat and transport demands, and including RES, power plants, and combined heat and power production (CHP) for district heating and transport technologies. In conclusion, the most fuel-efficient and least-cost technologies are identified through energy system...

Non conventional energy sources and energy conservation

International Nuclear Information System (INIS)

Bueno M, F.

1995-01-01

Geographically speaking, Mexico is in an enviable position. Sun, water, biomass and geothermal fields main non conventional energy sources with commercial applications, are presents and in some cases plentiful in national territory. Moreover the coastal tidal power which is in research stage in several countries. Non conventional energy sources are an alternative which allow us to reduce the consumption of hydrocarbons or any other type of primary energetic, are not by oneself choices for the energy conservation, but energy replacements. At the beginning of this year, CONAE created the Direction of Non conventional Energy Sources, which main objective is to promote and impulse programs inclined towards the application of systems based in renewable energy sources. The research centers represent a technological and consultative support for the CONAE. They have an infrastructure developed along several years of continuous work. The non conventional energy sources will be a reality at the same time that their cost be equal or lower than the cost for the traditional generating systems. CONAE (National Commission for Energy Conservation). (Author)

Fuel-efficiency of hydrogen and heat storage technologies for integration of fluctuating renewable energy sources

DEFF Research Database (Denmark)

Mathiesen, Brian Vad; Lund, Henrik

2005-01-01

This paper presents the methodology and results of analysing the use of different energy storage technologies in the task of integration of fluctuating renewable energy sources (RES) into the electricity supply. The analysis is done on the complete electricity system including renewable energy...... sources as well as power plants and CHP (Combined heat and power production). Emphasis is put on the need for ancillary services. Devices to store electricity as well as devices to store heat can be used to help the integration of fluctuating sources. Electricity storage technologies can be used...... to relocate electricity production directly from the sources, while heat storage devices can be used to relocate the electricity production from CHP plants and hereby improve the ability to integrate RES. The analyses are done by advanced computer modelling and the results are given as diagrams showing...

Carbon emissions, energy consumption and economic growth: An aggregate and disaggregate analysis of the Indian economy

International Nuclear Information System (INIS)

Ahmad, Ashfaq; Zhao, Yuhuan; Shahbaz, Muhammad; Bano, Sadia; Zhang, Zhonghua; Wang, Song; Liu, Ya

2016-01-01

This study investigates the long and short run relationships among carbon emissions, energy consumption and economic growth in India at the aggregated and disaggregated levels during 1971–2014. The autoregressive distributed lag model is employed for the cointegration analyses and the vector error correction model is applied to determine the direction of causality between variables. Results show that a long run cointegration relationship exists and that the environmental Kuznets curve is validated at the aggregated and disaggregated levels. Furthermore, energy (total energy, gas, oil, electricity and coal) consumption has a positive relationship with carbon emissions and a feedback effect exists between economic growth and carbon emissions. Thus, energy-efficient technologies should be used in domestic production to mitigate carbon emissions at the aggregated and disaggregated levels. The present study provides policy makers with new directions in drafting comprehensive policies with lasting impacts on the economy, energy consumption and environment towards sustainable development. - Highlights: •Relationships among carbon emissions, energy consumption and economic growth are investigated. •The EKC exists at aggregated and disaggregated levels for India. •All energy resources have positive effects on carbon emissions. •Gas energy consumption is less polluting than other energy sources in India.

Drinking water consumption patterns among adults-SMS as a novel tool for collection of repeated self-reported water consumption.

Science.gov (United States)

Säve-Söderbergh, Melle; Toljander, Jonas; Mattisson, Irene; Åkesson, Agneta; Simonsson, Magnus

2018-03-01

Studies have shown that the average drinking water consumption ranges between 0.075 and 3 L/day for adults with both national and regional differences. For exposure assessment of drinking water hazards, country-specific drinking water consumption data including sources of the consumed water may therefore be warranted. To estimate the amount and source of drinking water consumed among adults in Sweden, we collected self-reported estimates using both traditional methods (telephone interviews, web questionnaire) and a novel method (Short Message Service, SMS questionnaires) in a population from an average sized Swedish municipality. Monthly SMS questionnaires were sent out during one year to obtain longitudinal information as well. SMS showed to be a promising tool for collecting self-reported consumption, as most citizens could participate and the method showed high response rate. Data collected via the SMS questionnaire shows an average consumption of cold tap water of 4.9 glasses/24 h (one glass=200 ml), while the average estimates of cold tap water collected by the traditional methods range from 4.5 to 7.0 glasses/24 h. For statistical distributions, the mean daily consumption of cold tap water for the population was best fitted to a gamma distribution. About 70% of the cold tap water is consumed at home. Based on the results from the SMS study, we suggest using 1 l/day for the average adult population and 2.5 l/day for high consumers for risk assessment of cold tap water consumption. As 46% of the tap water consumed is heated, we suggest using 1.85 l/day for total tap water consumption.

Which Fish Should I Eat? Perspectives Influencing Fish Consumption Choices

Science.gov (United States)

Choi, Anna L.; Karagas, Margaret R.; Mariën, Koenraad; Rheinberger, Christoph M.; Schoeny, Rita; Sunderland, Elsie; Korrick, Susan

2012-01-01

Background: Diverse perspectives have influenced fish consumption choices. Objectives: We summarized the issue of fish consumption choice from toxicological, nutritional, ecological, and economic points of view; identified areas of overlap and disagreement among these viewpoints; and reviewed effects of previous fish consumption advisories. Methods: We reviewed published scientific literature, public health guidelines, and advisories related to fish consumption, focusing on advisories targeted at U.S. populations. However, our conclusions apply to groups having similar fish consumption patterns. Discussion: There are many possible combinations of matters related to fish consumption, but few, if any, fish consumption patterns optimize all domains. Fish provides a rich source of protein and other nutrients, but because of contamination by methylmercury and other toxicants, higher fish intake often leads to greater toxicant exposure. Furthermore, stocks of wild fish are not adequate to meet the nutrient demands of the growing world population, and fish consumption choices also have a broad economic impact on the fishing industry. Most guidance does not account for ecological and economic impacts of different fish consumption choices. Conclusion: Despite the relative lack of information integrating the health, ecological, and economic impacts of different fish choices, clear and simple guidance is necessary to effect desired changes. Thus, more comprehensive advice can be developed to describe the multiple impacts of fish consumption. In addition, policy and fishery management inter-ventions will be necessary to ensure long-term availability of fish as an important source of human nutrition. PMID:22534056

Emerging desalination technologies for water treatment: a critical review.

Science.gov (United States)

Subramani, Arun; Jacangelo, Joseph G

2015-05-15

In this paper, a review of emerging desalination technologies is presented. Several technologies for desalination of municipal and industrial wastewater have been proposed and evaluated, but only certain technologies have been commercialized or are close to commercialization. This review consists of membrane-based, thermal-based and alternative technologies. Membranes based on incorporation of nanoparticles, carbon nanotubes or graphene-based ones show promise as innovative desalination technologies with superior performance in terms of water permeability and salt rejection. However, only nanocomposite membranes have been commercialized while others are still under fundamental developmental stages. Among the thermal-based technologies, membrane distillation and adsorption desalination show the most promise for enhanced performance with the availability of a waste heat source. Several alternative technologies have also been developed recently; those based on capacitive deionization have shown considerable improvements in their salt removal capacity and feed water recovery. In the same category, microbial desalination cells have been shown to desalinate high salinity water without any external energy source, but to date, scale up of the process has not been methodically evaluated. In this paper, advantages and drawbacks of each technology is discussed along with a comparison of performance, water quality and energy consumption. Copyright © 2015 Elsevier Ltd. All rights reserved.

Accuracy of past projections of US energy consumption

International Nuclear Information System (INIS)

O'Neill, B.C.; Desai, Mausami

2005-01-01

Energy forecasts play a key role in development of energy and environmental policy. Evaluations of the accuracy of past projections can provide insight into the uncertainty that may be associated with current forecasts. They can also be used to identify sources of inaccuracies, and potentially lead to improvements in projections over time. Here we assess the accuracy of projections of US energy consumption produced by the Energy Information Administration over the period 1982-2000. We find that energy consumption projections have tended to underestimate future consumption. Projections 10-13 years into the future have had an average error of about 4%, and about half that for shorter time horizons. These errors mask much larger, offsetting errors in the projection of GDP and energy intensity (EI). GDP projections have consistently been too high, and EI projection consistently too low, by more than 15% for projections of 10 years or more. Further work on the source of these sizable inaccuracies should be a high priority. Finally, we find no evidence of improvement in projections of consumption, GDP, or EI since 1982

Technological yields of sources for radiation processing

International Nuclear Information System (INIS)

Zagorski, Z.P.

1990-01-01

The present report is prepared for planners of radiation processing of any material. Sources with cobalt-60 are treated marginally, because most probably, there will be no installation of technically meaningful activity in Poland before the year 2000. Calculations are focused on accelerators of electrons, divided into two groups: versatile linacs of energy up to 13 MeV and accelerators of lower energy, below 2 MeV, of better energetical yield but of limited applications. The calculations are connected with the confrontation of the author's technological expectations during the preparation of the linac project in the late '60s, with the results of twenty years of exploitation of the machine. One has to realize that from the 150 kV input power from the mains, only 5 kV of bent and scanned beam is recovered on the conveyor. That power is only partially used for radiation induced phenomena, sometimes only a few percent, because of the demanded homogeneity of the dose, of the mode of packing of the object and its shape, of losses at the edges of the scanned area and in the spaces between boxes, and of losses during the dead time due to the tuning of the machine and dosimetric operations. The use of lower energy accelerators may be more economical in case of objects of optimum type. At the first stage, that is of the conversion of electrical power into that of the low energy electron beam, the yield is 2-3 times better than in the case of linacs. Attention has been paid to the technological aspects of electron beam conversion into the more penetrating bremsstrahlung similar to gamma radiation. The advantages of these technologies, which make it possible to control the shape of the processed object are stressed. Ten parameters necessary for a proper calculation of technological yields of radiation processing are listed. Additional conditions which must be taken into account in the comparison of the cost of radiation processing with the cost of other technologies are also

The role of information and communication technologies (ICTs) in household energy consumption-prospects for the UK

Energy Technology Data Exchange (ETDEWEB)

Martiskainen, M.; Coburn, J. [Sussex Energy Group, SPRU (Science and Technology Policy Research), University of Sussex, Freeman Centre, Falmer, Brighton, East Sussex, BN1 9QE (United Kingdom)

2011-03-15

Growing concerns about climate change and energy security have led to a strong focus on energy demand reduction and energy efficiency within United Kingdom (UK) energy policy. At the same time, information and communication technologies (ICTs) have become pervasive in society and this has brought with it new policy options which use them as enabling technologies. One such policy option planned for implementation in the UK is the use of smart meters and real-time displays to encourage people to become more aware of their energy consumption and possibly change their energy-related behaviours. Smart meters and display units by definition link individuals, technologies and society, and their effectiveness is influenced by a range of factors. Ten semi-structured stakeholder interviews with industry, government and academia and a review of literature were conducted in order to identify which factors are most likely to contribute to the effectiveness of implementing smart meters and real-time displays in the UK. Further analysis showed a number of key themes and perspectives on behavioural change, particularly as they relate to household electricity use and the role of smart meters in the UK energy policy, including the role of ICTs in energy demand reduction more generally.

Fuel consumption impacts of auto roof racks

International Nuclear Information System (INIS)

Chen, Yuche; Meier, Alan

2016-01-01

The after-market roof rack is one of the most common components attached to a vehicle for carrying over-sized items, such as bicycles and skis. It is important to understand these racks’ fuel consumption impacts on both individual vehicles and the national fleet because they are widely used. We estimate the national fuel consumption impacts of roof racks using a bottom-up approach. Our model incorporates real-world data and vehicle stock information to enable assessing fuel consumption impacts for several categories of vehicles, rack configurations, and usage conditions. In addition, the model draws on two new data-gathering techniques, on-line forums and crowd-sourcing. The results show that nationwide, roof racks are responsible for 0.8‰ of light duty vehicle fuel consumption in 2015, corresponding to 100 million gallons of gasoline per year. Sensitivity analyses show that results are most sensitive to the fraction of vehicles with installed roof racks but carrying no equipment. The aerodynamic efficiency of typical roof racks can be greatly improved and reduce individual vehicle fuel consumption; however, government policies to minimize extensive driving with empty racks—if successful—could save more fuel nationally. - Highlights: •First estimate of national energy impacts of auto roof racks—about 1‰. •A bottom-up approach reveals details of the fuel consumption penalty caused by racks. •Two novel data collection techniques, on-line forums and crowd-sourcing, improve estimate. •Technical and behavioral policies could significantly cut fuel penalties from roof racks.

Evaluation of sugar yeast consumption by measuring electrical medium resistance

Directory of Open Access Journals (Sweden)

Martin Lucas Zamora

2013-12-01

Full Text Available The real-time monitoring of alcoholic fermentation (sugar consumption is very important in industrial processes. Several techniques (i.e., using a biosensor have been proposed to realize this goal. In this work, we propose a new method to follow sugar yeast consumption. This novel method is based on the changes in the medium resistance (Rm that are induced by the CO2 bubbles produced during a fermentative process. We applied a 50-mV and 700-Hz signal to 75 ml of a yeast suspension in a tripolar cell. A gold electrode was used as the working electrode, whereas an Ag/AgCl electrode and a stainless-steel electrode served as the reference and counter electrodes, respectively. We then added glucose to the yeast suspension and obtained a 700% increase in the Rm after 8 minutes. The addition of sucrose instead of glucose as the carbon source resulted in a 1200% increase in the Rm. To confirm that these changes are the result of CO2 bubbles in the fermentation medium, we designed a tetrapolar cell in which CO2 gas was insufflated at the bottom of the cell and concluded that the changes were due to CO2 bubbles produced during the fermentation. Consequently, this new method is a low-cost and rapid technology to follow the sugar consumption in yeast.

Industrial ion sources broadbeam gridless ion source technology

CERN Document Server

Zhurin, Viacheslav V

2012-01-01

Due to the large number of uses of ion sources in academia and industry, those who utilize these sources need up to date and coherent information to keep themselves abreast of developments and options, and to chose ideal solutions for quality and cost-effectiveness. This book, written by an author with a strong industrial background and excellent standing, is the comprehensive guide users and developers of ion sources have been waiting for. Providing a thorough refresher on the physics involved, this resource systematically covers the source types, components, and the operational parameters.

Rural Latino caregivers' beliefs and behaviors around their children's salt consumption.

Science.gov (United States)

Hoeft, Kristin S; Guerra, Claudia; Gonzalez-Vargas, M Judy; Barker, Judith C

2015-04-01

Prevalence of high blood pressure has been increasing in U.S. children, with implications for long term health consequences. Sodium consumption, a modifiable risk factor for high blood pressure, is above recommended limits and increasing. Very little is known about Latino caregiver beliefs and behaviors around their children's salt consumption. In California's Central Valley, qualitative interviews in Spanish investigated low-income caregivers' views and understandings of their children's dietary salt consumption. Thirty individual interviews and 5 focus groups were conducted (N=61). Interview transcripts were translated and transcribed, coded and thematically analyzed. Seven primary topic areas around children's salt intake and its impact on health were identified: children's favorite foods, children's dietary salt sources, superiority of home-cooked foods, salty and sweet foods, managing salt for health, developing children's tastes, and adding salt added at the table. Parents recognize common sources of sodium such as "junk food" and processed food and made efforts to limit their children's consumption of these foods, but may overlook other significant sodium sources, particularly bread, cheese, prepared soups and sports drinks. Caregivers recognize excess salt as unhealthy for children, but don't believe health problems (like high blood pressure) can occur in young children. Nevertheless, they made efforts to limit how much salt their children consumed through a variety of strategies; school meals were a source of high sodium that they felt were outside of their control. Latino caregivers are concerned about their children's salt intake and attempt to limit consumption, but some common sources of sodium are under-recognized. Copyright © 2014 Elsevier Ltd. All rights reserved.

Risk thresholds for alcohol consumption

DEFF Research Database (Denmark)

Wood, Angela M; Kaptoge, Stephen; Butterworth, Adam S

2018-01-01

previous cardiovascular disease. METHODS: We did a combined analysis of individual-participant data from three large-scale data sources in 19 high-income countries (the Emerging Risk Factors Collaboration, EPIC-CVD, and the UK Biobank). We characterised dose-response associations and calculated hazard......BACKGROUND: Low-risk limits recommended for alcohol consumption vary substantially across different national guidelines. To define thresholds associated with lowest risk for all-cause mortality and cardiovascular disease, we studied individual-participant data from 599 912 current drinkers without......·4 million person-years of follow-up. For all-cause mortality, we recorded a positive and curvilinear association with the level of alcohol consumption, with the minimum mortality risk around or below 100 g per week. Alcohol consumption was roughly linearly associated with a higher risk of stroke (HR per 100...

Based on the Hardware Resources Configurable Shanke PLC Building Energy Consumption Detection System

Directory of Open Access Journals (Sweden)

Cheng Guanghe

2017-01-01

Full Text Available According to the actual situation of the comprehensive office building and the functional requirements of the building energy consumption monitoring and management system, the office building energy consumption monitoring and management system is designed by using the hardware resource configurable Shanke PLC(SKPLC as the data collector. The system uses data bus technology and field data acquisition technology to achieve the building energy consumption data acquisition and management. Practice has proved that energy-saving effect is good.

Solid-state lighting technology perspective.

Energy Technology Data Exchange (ETDEWEB)

Tsao, Jeffrey Yeenien; Coltrin, Michael Elliott

2006-08-01

Solid-State Lighting (SSL) uses inorganic light-emitting diodes (LEDs) and organic light-emitting diodes (OLEDs) to convert electricity into light for illumination. SSL has the potential for enormous energy savings and accompanying environmental benefits if its promise of 50% (or greater) energy efficiencies can be achieved. This report provides a broad summary of the technologies that underlie SSL. The applications for SSL and potential impact on U.S. and world-wide energy consumption, and impact on the human visual experience are discussed. The properties of visible light and different technical metrics to characterize its properties are summarized. The many factors contributing to the capital and operating costs for SSL and traditional lighting sources (incandescent, fluorescent, and high-intensity discharge lamps) are discussed, with extrapolations for future SSL goals. The technologies underlying LEDs and OLEDs are also described, including current and possible alternative future technologies and some of the present limitations.

Apparent Consumption vs. Total Consumption--A Lead-Acid Battery Case Study

Science.gov (United States)

Wilburn, David R.; Buckingham, David A.

2006-01-01

under- or overreported (depending on the net trade flow). Factors that influence consumption and trade patterns include variations in industry structure, labor or financial markets, legislation, and technology. As U.S. trade patterns of manufactured products change, omitting mineral commodities incorporated into these goods as part of U.S. mineral commodity consumption estimates may affect the interpretation of observed trends in minerals consumption and trade. Although it may be desirable to include minerals contained in manufactured products as part of consumption estimates, collection and estimation of these data are sometimes difficult. Consumption and trade data for every traded product may not be readily available. Compiling comprehensive consumption statistics for mineral commodities, which have many end uses, each including multiple products, may be time consuming. For these reasons, studies of all mineral commodities are not feasible. Mineral commodity selection for this study is based on data accessibility considerations and the relative importance of lead contained in imported and exported products when considered part of total U.S. lead consumption. Lead was selected for this initial evaluation of total mineral consumption because of the need to understand the consumption pattern of this potentially toxic metal and its compounds, the relative simplicity of this sector?s end-use structure, and the availability of trade data. This study draws upon the findings of an earlier lead consumption study (Biviano and others, 1999) conducted by the USGS for the period 1984 to 1993, but uses a different study methodology for an industry whose structure has changed from that considered in the earlier study. Figure 1 shows the quantity of material contributing to U.S. total consumption of lead metal from domestic and foreign industrial sectors in 2004, based upon trade data reported by the USGS and the U.S. International Trade Commission (USITC). For

Life Cycle Assessment of pretreatment technologies for anaerobic digestion of source-separated organic household waste

DEFF Research Database (Denmark)

Naroznova, Irina; Møller, Jacob; Scheutz, Charlotte

2013-01-01

The environmental performance of two pretreatment technologies for source-separated organic waste was compared using life cycle assessment (LCA). An innovative pulping process where source-separated organic waste is pulped with cold water forming a volatile solid rich biopulp was compared to a more...... including a number of non-toxic and toxic impact categories were assessed. No big difference in the overall performance of the two technologies was observed. The difference for the separate life cycle steps was, however, more pronounced. More efficient material transfer in the scenario with waste pulping...

Discourses of Consumption in US-American Culture

Directory of Open Access Journals (Sweden)

Rita Turner

2010-07-01

Full Text Available This paper explores varieties and examples of discourses of consumption, focusing primarily on US-American cultural discourses. The international community has in recent years developed an extremely valuable body of literature examining strategies for facilitating sustainable consumption; economic ramifications of varying consumption behaviors; attitudes and social structures that encourage or discourage sustainable consumption; approaches to consumption as a component of a sustainable or “green” lifestyle; and considerations of consumption practices in relation to inequities between North and South. The United States has made relatively few contributions to this body of literature thus far. But although the U.S. has not been one of the primary sources of academic literature on sustainable consumption, several types of discourses on consumption have become prominent in U.S. popular culture. These types of discourses include examinations of the moral status of consumption; investigations of the environmental or health consequences of modern consumption behaviors; explorations and critiques of green consumerism; and discourses that either construct or critique the commodification of the nonhuman world to produce objects for consumption. Throughout this paper I outline and offer examples of these strains of popular discourse, drawing on a newly-emerging body of U.S. literature and critically analyzing instances of discourse about sustainable consumption in film, television, internet, and print media. I conclude by examining new perspectives on sustainable coexistence that offer transformative possibilities for establishing relationships with the more-than-human world that are not based primarily on consumption.

Investigating the water consumption for electricity generation at Turkish power plants

Science.gov (United States)

El-Khozondar, Balkess; Aydinalp Koksal, Merih

2017-11-01

The water-energy intertwined relationship has recently gained more importance due to the high water consumption in the energy sector and to the limited availability of the water resources. The energy and electricity demand of Turkey is increasing rapidly in the last two decades. More thermal power plants are expected to be built in the near future to supply the rapidly increasing demand in Turkey which will put pressure on water availability. In this study, the water consumption for electricity generation at Turkish power plants is investigated. The main objectives of this study are to identify the amount of water consumed to generate 1 kWh of electricity for each generation technology currently used in Turkey and to investigate ways to reduce the water consumption at power plants expected to be built in the near future to supply the increasing demand. The various electricity generation technology mixture scenarios are analyzed to determine the future total and per generation water consumption, and water savings based on changes of cooling systems used for each technology. The Long-range Energy Alternatives Planning (LEAP) program is used to determine the minimum water consuming electricity generation technology mixtures using optimization approaches between 2017 and 2035.

Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Research results of hard photon technology have been summarized as a part of novel technology development highly utilizing the quantum nature of photon. Hard photon technology refers to photon beam technologies which use photon in the 0.1 to 200 nm wavelength region. Hard photon has not been used in industry due to the lack of suitable photon sources and optical devices. However, hard photon in this wavelength region is expected to bring about innovations in such areas as ultrafine processing and material synthesis due to its atom selective reaction, inner shell excitation reaction, and spatially high resolution. Then, technological themes and possibility have been surveyed. Although there are principle proposes and their verification of individual technologies for the technologies of hard photon generation, regulation and utilization, they are still far from the practical applications. For the photon source technology, the laser diode pumped driver laser technology, laser plasma photon source technology, synchrotron radiation photon source technology, and vacuum ultraviolet photon source technology are presented. For the optical device technology, the multi-layer film technology for beam mirrors and the non-spherical lens processing technology are introduced. Also are described the reduction lithography technology, hard photon excitation process, and methods of analysis and measurement. 430 refs., 165 figs., 23 tabs.

Open source 3D printers: an appropriate technology for building low cost optics labs for the developing communities

Science.gov (United States)

Gwamuri, J.; Pearce, Joshua M.

2017-08-01

The recent introduction of RepRap (self-replicating rapid prototyper) 3-D printers and the resultant open source technological improvements have resulted in affordable 3-D printing, enabling low-cost distributed manufacturing for individuals. This development and others such as the rise of open source-appropriate technology (OSAT) and solar powered 3-D printing are moving 3-D printing from an industry based technology to one that could be used in the developing world for sustainable development. In this paper, we explore some specific technological improvements and how distributed manufacturing with open-source 3-D printing can be used to provide open-source 3-D printable optics components for developing world communities through the ability to print less expensive and customized products. This paper presents an open-source low cost optical equipment library which enables relatively easily adapted customizable designs with the potential of changing the way optics is taught in resource constraint communities. The study shows that this method of scientific hardware development has a potential to enables a much broader audience to participate in optical experimentation both as research and teaching platforms. Conclusions on the technical viability of 3-D printing to assist in development and recommendations on how developing communities can fully exploit this technology to improve the learning of optics through hands-on methods have been outlined.

From traces to imagery: film consumption in Belle Époque carioca

Directory of Open Access Journals (Sweden)

Pedro Vinicius Asterito Lapera

2015-08-01

Full Text Available This article intends to undertake a discussion of media consumption at the turn of the XIXth and XXth centuries from some sources contained by some journals stored in the National Library of Brazil. Because of the heterogeneity of these sources, we chose to focus the discussion on consumption to trace some possible paths in its analysis, with emphasis on a cultural history that encompasses the uses and representations that circulated through the cinematic practice. In the treatment of these sources, we chose the methodology of the evidential paradigm, as Carlo Ginzburg thought about it when dealing with heterogeneous sources, combining with this the analysis of Mary Douglas and Baron Isherwood on consumption in complex societies and Roger Chartier’s on cultural history. Finally, we place our questions from the discussions launched by Vicente de Paula Araújo and Jean Claude Bernardet on Brazilian cinema of the silent period.

Choosing the right technology

DEFF Research Database (Denmark)

Milan, Christian; Nielsen, Mads Pagh; Bojesen, Carsten

2014-01-01

The use of renewable energy sources (RES) has continuously increased throughout the last decade. In the residential building sector the trend goes towards energy supply systems based on multiple RES. This is mainly due to political requirements, governmental subsidies and fuel price development....... These systems not only require an optimal design with respect to the installed capacities but also the right choice in combining the available technologies assuring a cost-effective solution. e aim of this paper is to present an optimization methodology for residential on-site energy supply systems based...... on mixed integer linear programming. The methodology chooses the right combination of technologies and sizes the components based on on-site weather data and expected consumption profiles. Through this approach the fluctuations of RES as well as the user behavior are taken into account already during...

Elucidating the consumption and CO_2 emissions of fossil fuels and low-carbon energy in the United States using Lotka–Volterra models

International Nuclear Information System (INIS)

Tsai, Bi-Huei; Chang, Chih-Jen; Chang, Chun-Hsien

2016-01-01

By using the Lotka–Volterra model, this work examines for the first time the feasibility of using low-carbon energy to reduce fossil fuel consumption in the United States and, ultimately, to decrease CO_2 emissions. The research sample in this work consists of data on energy consumption and CO_2 emissions in the United States. Parameter estimation results reveal that although the consumption of low-carbon energy increases the consumption of fossil fuels, the latter does not affect the former. Low-carbon energy usage, including nuclear energy and solar photovoltaic power, increases fossil fuel consumption because the entire lifetime of a nuclear or solar energy facility, from the construction of electricity plants to decommissioning, consumes tremendous amounts of fossil fuels. This result verifies the infeasibility of low-carbon energy to replace fossil fuels under the current mining technology, electricity generation skills and governmental policy in the United States and explains why the United States refused to become a signatory of the Kyoto Protocol. Equilibrium analysis results indicate that the annual consumption of fossil fuels will ultimately exceed that of low-carbon energy by 461%. Since our proposed Lotka–Volterra model accurately predicts the consumption and CO_2 emission of different energy sources, this work contributes to the energy policies. - Highlights: • Our Lotka–Volterra model accurately predicts consumption of different energy sources. • We find the current infeasibility of using low-carbon energy to reduce fossil fuels. • The set-up of nuclear and solar plants increases fossil fuel usage in the U.S. • The consumption of fossil fuels will exceed that of low-carbon energy by 435%. • United States government prefers economic development over environmental protection.

Consumptive qualities of different potato varieties

Directory of Open Access Journals (Sweden)

М. М. Фурдига

2017-03-01

Full Text Available Purpose. To summarize results of studying consumptive qualities of different varieties of potato and define basic characteristics which allow to subsume them under specific economic categories. Methods. Field study, laboratory test, summarizing, analytical approach. Results. Potato varieties entered in the State register of plant varieties suitable to dissemination in Ukraine and new ones especially to be bred at the Institute of Potato Growing of NAAS were studied during the period of 2005–2016 for such basic economic characters as consumptive quality of tubers, content of starch, dry matters, protein, sugar, vitamins, carotenoids and mineral substances as well as aminoacids, color of flesh, suitability for industrial manufacturing of potato products and for purpose of technology. Attention was paid to the good prospects to use varie­ties with purple, blue and red potato tuber flesh with high antioxidant capacity. Potato varieties with above cha­racteristics and their complex combination were defined and described. The requirements of processing industry for potato as a raw material for manufacturing of potato food were given. Conclusions. The major criterion for consumptive qualities of a potato variety and correspondingly division for the commercial use is consumptive quality of tubers, especially content of essential nutrients and their favorable combination, improved taste and cooking quality, high antioxidant capacity, suitability for potato products manufacturing and use for purpose of technology. Potato varieties can be divided for economic purposes into edible, suitable for potato products manufacturing, technical and multipurpose ones.

Discourses of Technology

DEFF Research Database (Denmark)

Sommer, Jannek K.; Knudsen, Gry Høngsmark

In this poster we address consumption of technology from the perspective of failure. A large body of studies of consumption of technology have focused on consumer acceptance (Kozinets, 2008). These studies have identified particular narratives about social and economic progress, and pleasure...... (Kozinets, 2008) as drivers of consumer acceptance of new technology. Similarly, Giesler (2008) has conceptualized consumer acceptance of technology as a form of marketplace drama, in which market ideologies are negotiated between consumers and media discourses. We suggest to study discourses around failed...... technology products to explore the negotiation of the familiar and alien that makes consumers reject or embrace a new technology. Thus, this particular project sets out to analyze consumer discourses surrounding the Google Glass video “How it Feels [through Google Glass]” on YouTube, because we want...

Developing electron beam bunching technology for improving light sources

International Nuclear Information System (INIS)

Carlsten, B.E.; Chan, K.C.D.; Feldman, D.W.

1997-01-01

This is the final report of a three-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The goal of this project was to develop a new electron bunch compression technology, experimentally demonstrate subpicosecond compression of bunches with charges on the order of 1 nC, and to theoretically investigate fundamental limitations to electron bunch compression. All of these goals were achieved, and in addition, the compression system built for this project was used to generate 22 nm light in a plasma-radiator light source

Economic assessment of RFID coupled with open source technologies for wood traceability in Calabria

Directory of Open Access Journals (Sweden)

Sperandio G

2017-04-01

Full Text Available The aim of this work was to assess the economic sustainability of the implementation of a wood traceability system in Calabria based on RFID and open source technologies. We identified a break-even point in its implementation under different scenarios in order to highlight the economic sustainability limits, expressed in terms of m3 or tons of processed product. The results showed that the use of RFID technology along the supply chain could lead to an effective operational simplification and to a more efficient use of resources. Based on the average market prices for timber (80-120 € / m3, the implementation of RFID technology led to an increase in timber price by 8% under the worst scenarios. This suggests that the use of open source technologies for wood traceability is already feasible and economically sustainable, as 40% of private companies stated their willingness to pay a premium price (on average 3.25% higher for purchasing certified local wood products in Calabria. Moreover, we expect a further reduction of tags and hardware costs in the next future, up to half the costs estimated in this work, thus making the application of such technology to timber traceability even more affordable.

Development of a Life Cycle Inventory of Water Consumption Associated with the Production of Transportation Fuels

Energy Technology Data Exchange (ETDEWEB)

Lampert, David J. [Argonne National Lab. (ANL), Argonne, IL (United States); Cai, Hao [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, Zhichao [Argonne National Lab. (ANL), Argonne, IL (United States); Keisman, Jennifer [Argonne National Lab. (ANL), Argonne, IL (United States); Wu, May [Argonne National Lab. (ANL), Argonne, IL (United States); Han, Jeongwoo [Argonne National Lab. (ANL), Argonne, IL (United States); Dunn, Jennifer [Argonne National Lab. (ANL), Argonne, IL (United States); Sullivan, John L. [Argonne National Lab. (ANL), Argonne, IL (United States); Elgowainy, Amgad [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Keisman, Jennifer [American Association for the Advancemetn of Science (AAAS), Washington, DC (United States)

2015-10-01

The production of all forms of energy consumes water. To meet increased energy demands, it is essential to quantify the amount of water consumed in the production of different forms of energy. By analyzing the water consumed in different technologies, it is possible to identify areas for improvement in water conservation and reduce water stress in energy-producing regions. The transportation sector is a major consumer of energy in the United States. Because of the relationships between water and energy, the sustainability of transportation is tied to management of water resources. Assessment of water consumption throughout the life cycle of a fuel is necessary to understand its water resource implications. To perform a comparative life cycle assessment of transportation fuels, it is necessary first to develop an inventory of the water consumed in each process in each production supply chain. The Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model is an analytical tool that can used to estimate the full life-cycle environmental impacts of various transportation fuel pathways from wells to wheels. GREET is currently being expanded to include water consumption as a sustainability metric. The purpose of this report was to document data sources and methodologies to estimate water consumption factors (WCF) for the various transportation fuel pathways in GREET. WCFs reflect the quantity of freshwater directly consumed per unit production for various production processes in GREET. These factors do not include consumption of precipitation or low-quality water (e.g., seawater) and reflect only water that is consumed (i.e., not returned to the source from which it was withdrawn). The data in the report can be combined with GREET to compare the life cycle water consumption for different transportation fuels.

Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds.

Science.gov (United States)

Poojary, Mahesha M; Barba, Francisco J; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A; Juliano, Pablo

2016-11-22

Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds

Science.gov (United States)

Poojary, Mahesha M.; Barba, Francisco J.; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A.; Juliano, Pablo

2016-01-01

Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability. PMID:27879659

Statictical Analysis Of The Conditioning Factors Of Urban Electric Consumption

International Nuclear Information System (INIS)

Segura D'Rouville, Juan Joel; Suárez Carreño, Franyelit María

2017-01-01

This research work presents the analysis of the most important factors that condition the urban residential electricity consumption. This study shows the quantitative parameters conditioning the electricity consumption. This sector of analysis has been chosen because there is disaggregated information of which are the main social and technological factors that determine its behavior, growth, with the objective of elaborating policies in the management of the electric consumption. The electrical demand considered as the sum of the powers of all the equipment that are used in each of the instants of a full day, is related to the electrical consumption, which is not but the value of the power demanded by a determined consumer Multiplied by the time in which said demand is maintained. In this report we propose the design of a probabilistic model of prediction of electricity consumption, taking into account mainly influential social and technological factors. The statistical process of this database is done through the Stat Graphics software version 4.1, for its extensive didactic in the accomplishment of calculations and associated methods. Finally, the correlation of the variables was performed to classify the determinants in a specific way and thus to determine the consumption of the dwellings. (author)

Open source home care technology : technical design and development, user research, cost-benefit analysis, and business modeling

NARCIS (Netherlands)

Marike Hettinga; Ander de Keijzer; Guido van Alphen; Jan M. Nauta; Elles Gyaltsen-Lohuis; Niels Donninger; Rens Balkenende

2014-01-01

This paper presents the work in progress for the Hightech@home project. The aim of this project is to develop technology and knowledge concerning open source home care technology, utilizing open standards. Currently, there is limited availability of high tech sensor and communication technology

Solid-state lighting-a benevolent technology

International Nuclear Information System (INIS)

Schubert, E Fred; Kim, Jong Kyu; Luo Hong; Xi, J-Q

2006-01-01

Solid-state light sources are in the process of profoundly changing the way humans generate light for general lighting applications. Solid-state light sources possess two highly desirable features, which set them apart from most other light sources: (i) they have the potential to create light with essentially unit power efficiency and (ii) the properties of light, such as spectral composition and temporal modulation, can be controlled to a degree that is not possible with conventional light sources such as incandescent and fluorescent lamps. The implications are enormous and, as a consequence, many positive developments are to be expected including a reduction in global energy consumption, reduction of global-warming-gas and pollutant emissions and a multitude of new functionalities benefiting numerous applications. This review will assess the impact of solid-state lighting technology on energy consumption, the environment and on emerging application fields that make use of the controllability afforded by solid-state sources. The review will also discuss technical areas that fuel continued progress in solid-state lighting. Specifically, we will review the use of novel phosphor distributions in white light-emitting diodes (LEDs) and show the strong influence of phosphor distribution on efficiency. We will also review the use of reflectors in LEDs with emphasis on 'perfect' reflectors, i.e. reflectors with highly reflective omni-directional characteristics. Finally, we will discuss a new class of thin-film materials with an unprecedented low refractive index. Such low-n materials may strongly contribute to the continuous progress in solid-state lighting

Male and female alcohol consumption and live birth after assisted reproductive technology treatment

DEFF Research Database (Denmark)

Vittrup, Ida; Petersen, Gitte Lindved; Kamper-Jørgensen, Mads

2017-01-01

The objective was to assess the potential association between female and male alcohol consumption and probability of achieving a live birth after assisted reproductive treatment. From a nationwide Danish register-based cohort information on alcohol consumption at assisted reproductive treatment i...

Spin polarized electron source technology transferred from HE accelerators to electron microscopes

International Nuclear Information System (INIS)

Nakanishi, Tsutomu

2009-01-01

For many years, we have developed a technology of spin-polarized-electron-source (PES) for a future linear collider project (ILC). Various new techniques for achieving high polarization, high quantum efficiency, high current density, sub-nanosecond multi-bunch generation etc. were developed. Two fundamental technologies; reduction of dark current and preparation of extremely high vacuum environment to protect the Negative Electron Affinity (NEA) surface have been also developed. Using these PES technologies and a new transmission type photocathode, we recently succeeded in producing the high brightness and high polarization electron beam for the low energy electron microscope (LEEM). Our Spin-LEEM system enables the world-first dynamic observation of surface magnetic domain formed by evaporation on the metal substrate with ∼ 20 nm space resolutions. (author)

Fuel consumption and exhaust emissions of urban buses. Performance of newest diesel technology; Kaupunkibussien polttoaineenkulutus ja pakokaasupaeaestoet. Uusimman dieseltekniikan suorituskyky

Energy Technology Data Exchange (ETDEWEB)

Nylund, N.O.; Erkkilae, K.; Hartikka, T.

2007-03-15

The research was carried out by the Finnish Public Transport Association. Altogether seven vehicles were measured, two two-axle Euro 3 -class vehicles as references (Scania and Volvo), three new Euro 4 -class vehicles (Mercedes-Benz, Scania and Volvo) and two new three-axle vehicles (Euro 4 Scania and Euro 5 Volvo). The measurements were carried out on a chassis dynamometer, using three cycles describing actual driving. In addition to fuel consumption, exhaust emissions were also recorded for these vehicles. The differences in fuel consumption and operating expenses were after all smaller than first anticipated. When it comes to the Euro 3 -class reference vehicles, Volvo consumes 7.10% more fuel than Scania. For new two-axle vehicles the difference in fuel consumption, when simulating urban driving, is only 3.4%. Due to different technical solutions, the results were anticipated to be greater. In suburban driving although, the difference is at its most 11%. The Volvo Euro 4 -bus has in average the lowest fuel consumption. Looking at the three-axle vehicles, Scania consumes 3.5% less fuel than does Volvo. The measurements do not give an unambiguous answer to whether the EGR- or SCR technology is preferable regarding fuel consumption. The contemplation is hindered by two factors. On one hand, the order of superiority depends on the driving cycle, on the other, the actual exhaust emissions do not match with expectations. Scania's Euro 4 -engines produce higher NO{sub x}-emissions than its Euro 3 -engine. The fuel efficient Volvo Euro 4 -engine is not truly Euro 4 -class what comes to NO{sub x}-emissions. The Mercedes- Benz Euro 4- and Volvo Euro 5 -engines produce NO{sub x}-emissions genuinely matching their classes. Both fuel consumption and exhaust emissions have been observed in the study. In case exhaust emissions were completely disregarded, fleet decisions might be directed towards fuel efficient vehicles which after all do not reach the level of emission

Meat Consumption Culture in Ethiopia

Science.gov (United States)

Jo, Cheorun

2014-01-01

The consumption of animal flesh food in Ethiopia has associated with cultural practices. Meat plays pivotal and vital parts in special occasions and its cultural symbolic weight is markedly greater than that accorded to most other food. Processing and cooking of poultry is a gender based duty and has socio-cultural roles. Ethiopians are dependent on limited types of animals for meats due to the taboo associated culturally. Moreover, the consumption of meat and meat products has a very tidy association with religious beliefs, and are influenced by religions. The main religions of Ethiopia have their own peculiar doctrines of setting the feeding habits and customs of their followers. They influence meat products consumption through dictating the source animals that should be used or not be used for food, and scheduling the days of the years in periodical permeation and restriction of consumptions which in turn influences the pattern of meat consumption in the country. In Ethiopia, a cow or an ox is commonly butchered for the sole purpose of selling within the community. In special occasions, people have a cultural ceremony of slaughtering cow or ox and sharing among the group, called Kircha, which is a very common option of the people in rural area where access of meat is challenging frequently. PMID:26760739

Minimizing fuel wood consumption through the evolution of hot ston ...

African Journals Online (AJOL)

The central objective of this paper is to minimize fuelwood consumption through evolving alternative domestic energy. Data on alternative domestic energy sources, and use fuel wood consumption during scarcity of petroleum were collected using structured questionnaires. Data on time spent to cook yam, race and beans ...

Ultrafast disk technology enables next generation micromachining laser sources

Science.gov (United States)

Heckl, Oliver H.; Weiler, Sascha; Luzius, Severin; Zawischa, Ivo; Sutter, Dirk

2013-02-01

Ultrashort pulsed lasers based on thin disk technology have entered the 100 W regime and deliver several tens of MW peak power without chirped pulse amplification. Highest uptime and insensitivity to back reflections make them ideal tools for efficient and cost effective industrial micromachining. Frequency converted versions allow the processing of a large variety of materials. On one hand, thin disk oscillators deliver more than 30 MW peak power directly out of the resonator in laboratory setups. These peak power levels are made possible by recent progress in the scaling of the pulse energy in excess of 40 μJ. At the corresponding high peak intensity, thin disk technology profits from the limited amount of material and hence the manageable nonlinearity within the resonator. Using new broadband host materials like for example the sesquioxides will eventually reduce the pulse duration during high power operation and further increase the peak power. On the other hand industry grade amplifier systems deliver even higher peak power levels. At closed-loop controlled 100W, the TruMicro Series 5000 currently offers the highest average ultrafast power in an industry proven product, and enables efficient micromachining of almost any material, in particular of glasses, ceramics or sapphire. Conventional laser cutting of these materials often requires UV laser sources with pulse durations of several nanoseconds and an average power in the 10 W range. Material processing based on high peak power laser sources makes use of multi-photon absorption processes. This highly nonlinear absorption enables micromachining driven by the fundamental (1030 nm) or frequency doubled (515 nm) wavelength of Yb:YAG. Operation in the IR or green spectral range reduces the complexity and running costs of industrial systems initially based on UV light sources. Where UV wavelength is required, the TruMicro 5360 with a specified UV crystal life-time of more than 10 thousand hours of continues

Technologies for a greenhouse-constrained society: Regional response - India

International Nuclear Information System (INIS)

Kumar, A.

1992-01-01

In this address, the author reviews the current energy policy in India. Consumption has increased, primarily in the use of expensive diesel fuel and kerosene. Noncommercial use has declined. The government has failed to fund research that would improve the lives of the rural poor. Biomass may be the only economic choice for the country. The author calls for the creation of a technology bank that could assist developing countries in making environmentally and economically sound choices. It is further explained that nuclear energy is limited as a major energy source because of concerns about waste disposal and dependence on foreign technology for heavy water production

Energy consumption and energy prices

International Nuclear Information System (INIS)

Bentzen, J.

1993-01-01

Data are presented on energy consumption and energy prices related to a number of OECD (Organisation for Economic Co-operation and Development) lands covering the period 1951-1990. The information sources are described and the development of energy consumption and prices in Denmark are illustrated in relation to these other countries. The energy intensity (the relation between energy consumption and the gross national product) is dealt with. Here it is possible to follow development during the whole post-war period. It is generally understood that Denmark saved large amounts of energy after 1973-74 but, taken over the whole post-war period, savings and decline in energy-gross national product relations are less dramatic compared to conditions in other OECD countries. Energy coefficients or elasticities show the relative rise in consumption compared to the relative rise in gross national product (growth rate). This is shown to be typically unstable and an eventual connection with the amount of energy price increase and/or the growth rate of the national economy is considered. Results of Granger causuality tests on energy consumption, national income and energy prices are presented. Effective energy prices were very low in Denmark up to 1970 when they suddenly began to increase. Since the oil crisis Denmark's energy consumption has fallen whereas the other countries have used rather more energy than before. Effective promotion of energy savings must be seen in relation to the fact that the 1970 basis level of energy consumption and intensity was unusually high. The high effective energy prices have also encouraged energy savings in Denmark. (AB)

High-efficiency pumps drastically reduce energy consumption

Energy Technology Data Exchange (ETDEWEB)

Anon

2002-05-01

Wilo's Stratos pumps for air conditioning and other domestic heating applications combine the advantages of wet runner technology with an innovative electronic commutator motor. The energy consumption of these high-efficiency pumps is halved compared with similar wet runner designs. With vast numbers of pumps used in buildings across Europe alone, the adoption of this technology potentially offers significant energy sayings. (Author)

Emissions and Fuel Consumption Modeling for Evaluating Environmental Effectiveness of ITS Strategies

Directory of Open Access Journals (Sweden)

Yuan-yuan Song

2013-01-01

Full Text Available Road transportation is a major fuel consumer and greenhouse gas emitter. Recently, the intelligent transportation systems (ITSs technologies, which can improve traffic flow and safety, have been developed to reduce the fuel consumption and vehicle emissions. Emission and fuel consumption estimation models play a key role in the evaluation of ITS technologies. Based on the influence analysis of driving parameters on vehicle emissions, this paper establishes a set of mesoscopic vehicle emission and fuel consumption models using the real-world vehicle operation and emission data. The results demonstrate that these models are more appropriate to evaluate the environmental effectiveness of ITS strategies with enough estimation accuracy.

Two-scale evaluation of remediation technologies for a contaminated site by applying economic input-output life cycle assessment: risk-cost, risk-energy consumption and risk-CO2 emission.

Science.gov (United States)

Inoue, Yasushi; Katayama, Arata

2011-09-15

A two-scale evaluation concept of remediation technologies for a contaminated site was expanded by introducing life cycle costing (LCC) and economic input-output life cycle assessment (EIO-LCA). The expanded evaluation index, the rescue number for soil (RN(SOIL)) with LCC and EIO-LCA, comprises two scales, such as risk-cost, risk-energy consumption or risk-CO(2) emission of a remediation. The effectiveness of RN(SOIL) with LCC and EIO-LCA was examined in a typical contamination and remediation scenario in which dieldrin contaminated an agricultural field. Remediation was simulated using four technologies: disposal, high temperature thermal desorption, biopile and landfarming. Energy consumption and CO(2) emission were determined from a life cycle inventory analysis using monetary-based intensity based on an input-output table. The values of RN(SOIL) based on risk-cost, risk-energy consumption and risk-CO(2) emission were calculated, and then rankings of the candidates were compiled according to RN(SOIL) values. A comparison between three rankings showed the different ranking orders. The existence of differences in ranking order indicates that the scales would not have reciprocal compatibility for two-scale evaluation and that each scale should be used independently. The RN(SOIL) with LCA will be helpful in selecting a technology, provided an appropriate scale is determined. Copyright © 2011 Elsevier B.V. All rights reserved.

CREATING VALUE WITHIN CONSUMPTION CULTURE

Directory of Open Access Journals (Sweden)

Daniel Adrian Gârdan

2016-12-01

Full Text Available The issue of culture consumption is a particular concern within the modern marketing theory. Culture can be seen as representing a body of knowledge, beliefs, values, attitudes, symbols etc, developed in a certain period of time by a group of individuals, items transmitted with the help of a social learning process to other generations within the group. Thus, the consumption of culture will identify itself with the consumption of any product, service or a combination of them, directly resulted as manifestation of culture, expressions of artistic creativity specific for a certain cultural space. The present paper proposes the analysis of the phenomenon referring to the culture consumption in terms of specific characteristics. The paper reviews the features specific to the modern consumer of culture, the relationship that exists between the individuals’ level of education and the culture consumption and value creation process or augmentation of the intrinsic value of an artistic product as a result of the contribution that the culture consumer can bring himself. The authors highlight the fact that within extremely complex processes which are defining the culture consumption, consumers can assume an active role, becoming on their turn co-participants in the cultural goods and services value creation and transmission. The modern consumer benefits more than ever from the advantages offered by the information technology, being called to respond to major challenges of the postmodernism paradigm in terms of culture consumption. Globalization and other social economic and politic phenomena have profoundly changed the reports between individual and culture, between self and other members of the society, causing synthesis and essential transformations of culture consumption, of culture consumers typologies, and not least of the very forms of artistic expression related to cultural goods and services.

Energy: The consumption will increase in 50% until year 2010

International Nuclear Information System (INIS)

1993-01-01

The energetic consumption will increase about 30% until year 2010. The article presents forecasting of International Energy Agency. Analyzing costs, consumption and demand, the IEA studies the different energy. Sources and their development: Natural gas (big increasing), Natural energy (decreasing), Carbon (stability). Finally recommendations of IEA are presented

Reduction of Fuel Consumption and Exhaust Pollutant Using Intelligent Transport Systems

Directory of Open Access Journals (Sweden)

Mostofa Kamal Nasir

2014-01-01

Full Text Available Greenhouse gas emitted by the transport sector around the world is a serious issue of concern. To minimize such emission the automobile engineers have been working relentlessly. Researchers have been trying hard to switch fossil fuel to alternative fuels and attempting to various driving strategies to make traffic flow smooth and to reduce traffic congestion and emission of greenhouse gas. Automobile emits a massive amount of pollutants such as Carbon Monoxide (CO, hydrocarbons (HC, carbon dioxide (CO2, particulate matter (PM, and oxides of nitrogen (NOx. Intelligent transport system (ITS technologies can be implemented to lower pollutant emissions and reduction of fuel consumption. This paper investigates the ITS techniques and technologies for the reduction of fuel consumption and minimization of the exhaust pollutant. It highlights the environmental impact of the ITS application to provide the state-of-art green solution. A case study also advocates that ITS technology reduces fuel consumption and exhaust pollutant in the urban environment.

Reduction of Fuel Consumption and Exhaust Pollutant Using Intelligent Transport Systems

Science.gov (United States)

Nasir, Mostofa Kamal; Md Noor, Rafidah; Kalam, M. A.; Masum, B. M.

2014-01-01

Greenhouse gas emitted by the transport sector around the world is a serious issue of concern. To minimize such emission the automobile engineers have been working relentlessly. Researchers have been trying hard to switch fossil fuel to alternative fuels and attempting to various driving strategies to make traffic flow smooth and to reduce traffic congestion and emission of greenhouse gas. Automobile emits a massive amount of pollutants such as Carbon Monoxide (CO), hydrocarbons (HC), carbon dioxide (CO2), particulate matter (PM), and oxides of nitrogen (NOx). Intelligent transport system (ITS) technologies can be implemented to lower pollutant emissions and reduction of fuel consumption. This paper investigates the ITS techniques and technologies for the reduction of fuel consumption and minimization of the exhaust pollutant. It highlights the environmental impact of the ITS application to provide the state-of-art green solution. A case study also advocates that ITS technology reduces fuel consumption and exhaust pollutant in the urban environment. PMID:25032239

Reduction of fuel consumption and exhaust pollutant using intelligent transport systems.

Science.gov (United States)

Nasir, Mostofa Kamal; Md Noor, Rafidah; Kalam, M A; Masum, B M

2014-01-01

Greenhouse gas emitted by the transport sector around the world is a serious issue of concern. To minimize such emission the automobile engineers have been working relentlessly. Researchers have been trying hard to switch fossil fuel to alternative fuels and attempting to various driving strategies to make traffic flow smooth and to reduce traffic congestion and emission of greenhouse gas. Automobile emits a massive amount of pollutants such as Carbon Monoxide (CO), hydrocarbons (HC), carbon dioxide (CO2), particulate matter (PM), and oxides of nitrogen (NO x ). Intelligent transport system (ITS) technologies can be implemented to lower pollutant emissions and reduction of fuel consumption. This paper investigates the ITS techniques and technologies for the reduction of fuel consumption and minimization of the exhaust pollutant. It highlights the environmental impact of the ITS application to provide the state-of-art green solution. A case study also advocates that ITS technology reduces fuel consumption and exhaust pollutant in the urban environment.

Development of water demand coefficients for power generation from renewable energy technologies

International Nuclear Information System (INIS)

Ali, Babkir; Kumar, Amit

2017-01-01

Highlights: • Water consumption and withdrawals coefficients for renewable power generation were developed. • Six renewable energy sources (biomass, nuclear, solar, wind, hydroelectricity, and geothermal) were studied. • Life cycle water footprints for 60 electricity generation pathways were considered. • Impact of cooling systems for some power generation pathways was assessed. - Abstract: Renewable energy technology-based power generation is considered to be environmentally friendly and to have a low life cycle greenhouse gas emissions footprint. However, the life cycle water footprint of renewable energy technology-based power generation needs to be assessed. The objective of this study is to develop life cycle water footprints for renewable energy technology-based power generation pathways. Water demand is evaluated through consumption and withdrawals coefficients developed in this study. Sixty renewable energy technology-based power generation pathways were developed for a comprehensive comparative assessment of water footprints. The pathways were based on the use of biomass, nuclear, solar, wind, hydroelectricity, and geothermal as the source of energy. During the complete life cycle, power generation from bio-oil extracted from wood chips, a biomass source, was found to have the highest water demand footprint and wind power the lowest. During the complete life cycle, the water demand coefficients for biomass-based power generation pathways range from 260 to 1289 l of water per kilowatt hour and for nuclear energy pathways from 0.48 to 179 l of water per kilowatt hour. The water demand for power generation from solar energy-based pathways ranges from 0.02 to 4.39 l of water per kilowatt hour, for geothermal pathways from 0.04 to 1.94 l of water per kilowatt hour, and for wind from 0.005 to 0.104 l of water per kilowatt hour. A sensitivity analysis was conducted with varying conversion efficiencies to evaluate the impact of power plant performance on

Power Consumption Efficiency Evaluation of Multi-User Full-Duplex Visible Light Communication Systems for Smart Home Technologies

Directory of Open Access Journals (Sweden)

Muhammad Tabish Niaz

2017-02-01

Full Text Available Visible light communication (VLC has recently gained significant academic and industrial attention. VLC has great potential to supplement the functioning of the upcoming radio-frequency (RF-based 5G networks. It is best suited for home, office, and commercial indoor environments as it provides a high bandwidth and high data rate, and the visible light spectrum is free to use. This paper proposes a multi-user full-duplex VLC system using red-green-blue (RGB, and white emitting diodes (LEDs for smart home technologies. It utilizes red, green, and blue LEDs for downlink transmission and a simple phosphor white LED for uplink transmission. The red and green color bands are used for user data and smart devices, respectively, while the blue color band is used with the white LED for uplink transmission. The simulation was carried out to verify the performance of the proposed multi-user full-duplex VLC system. In addition to the performance evaluation, a cost-power consumption analysis was performed by comparing the power consumption and the resulting cost of the proposed VLC system to the power consumed and resulting cost of traditional Wi-Fi based systems and hybrid systems that utilized both VLC and Wi-Fi. Our findings showed that the proposed system improved the data rate and bit-error rate performance, while minimizing the power consumption and the associated costs. These results have demonstrated that a full-duplex VLC system is a feasible solution suitable for indoor environments as it provides greater cost savings and energy efficiency when compared to traditional Wi-Fi-based systems and hybrid systems that utilize both VLC and Wi-Fi.

History of yogurt and current patterns of consumption.

Science.gov (United States)

Fisberg, Mauro; Machado, Rachel

2015-08-01

Yogurt has been a part of the human diet for several millennia and goes by many names throughout the world. The word "yogurt" is believed to have come from the Turkish word "yoğurmak," which means to thicken, coagulate, or curdle. While references to the health-promoting properties of yogurt date back to 6000 BC in Indian Ayurvedic scripts, it was not until the 20th century that Stamen Grigorov, a Bulgarian medical student, attributed the benefits to lactic acid bacteria. Today, most yogurt is fermented milk that is acidified with viable and well-defined bacteria (Lactobacillus bulgaricus and Streptococcus thermophiles). While patterns of yogurt consumption vary greatly from country to country, consumption is generally low. In the United States and Brazil, for example, only 6% of the population consume yogurt on a daily basis. Low consumption of yogurt represents a missed opportunity to contribute to a healthy lifestyle, as yogurt provides a good to excellent source of highly bioavailable protein and an excellent source of calcium as well as a source of probiotics that may provide a range of health benefits. © The Author(s) 2015. Published by Oxford University Press on behalf of the International Life Sciences Institute. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Use of regenerative energy sources and hydrogen technology. Proceedings; Nutzung regenerativer Energiequellen und Wasserstofftechnik 2008. Tagungsband

Energy Technology Data Exchange (ETDEWEB)

Luschtinetz, Thomas; Lehmann, Jochen (eds.)

2008-07-01

Within the 15th symposium 'Use of regenerative energy sources and hydrogen technology' at 6th to 8th November, 2008, in Stralsund (Federal Republic of Germany), the following lectures were held: (1) Processing of mine gas by means of membrane technology (T. Brinkmann, W. Clemens, A. Dengel, B. Hoting); (2) Energy storage in salt caverns / developments and concrete projects for adiabatic compressed air and for hydrogen storage (F. Crotogino, S. Huebner); (3) Application of an ORC plant in the area of a hybrid wind-hydrogen-plant (J. Eliasz, K. Rychlik); (4) Wind Farm Cluster Management Sysem (A.J. Gesino, C.A. Quintero Marrone, R. Mackensen, M. Wolff, B. Lange, K. Rohrig); (5) Results of a field test of a combination of a wood boiler and Stirling engine (B. Gross); (6) NANOSTIR - Optimisation of solid fuel operated Stirling CHP units by means of nano technological coatings (B. Gross); (7) Fundamental investigations of long-term behaviour / damage behaviour of big PEM stacks (September 2005 - October 2007) (M. Hinz, O. Luschtinetz, J. Lehmann); (8) HyFLEET:CUTE project: Results from the biggest hydrogen bus project in the world (T. Kampet); (9) Comparison of new chains of distribution for biogas and natural gas (M. Klamp); (10) Generation of hydrogen from formic acid at ambient temperature and its use in a H2/O2 fuel cell (B. Loges, A. Boddien, H. Junge, M. Beller); (11) PE membranes out of biological materials (E. Mendieta); (12) Offshore wind power affects generation, network and consumption (A. Miege, J. Lehmann, T. Luschtinetz, C. Sponholz, F. Gamallo); (13) Comparative investigations at fixed and tracking PV systems (R. Mueller, A. Rackwitz); (14) Energetic utilisation of biomass - boundary conditions, state of the art and perspectives (M. Nelles, D. Banemann, N. Engler, A. Schuech); (15) Supply networks - a new method of analysis for an optimized use of regenerative energy (R. Nieberle, A. Simroth); (16) Steam - vapour hybrid power plant supplied with

Freshwater savings from marine protein consumption

International Nuclear Information System (INIS)

Gephart, Jessica A; Pace, Michael L; D’Odorico, Paolo

2014-01-01

Marine fisheries provide an essential source of protein for many people around the world. Unlike alternative terrestrial sources of protein, marine fish production requires little to no freshwater inputs. Consuming marine fish protein instead of terrestrial protein therefore represents freshwater savings (equivalent to an avoided water cost) and contributes to a low water footprint diet. These water savings are realized by the producers of alternative protein sources, rather than the consumers of marine protein. This study quantifies freshwater savings from marine fish consumption around the world by estimating the water footprint of replacing marine fish with terrestrial protein based on current consumption patterns. An estimated 7 600 km 3  yr −1 of water is used for human food production. Replacing marine protein with terrestrial protein would require an additional 350 km 3  yr −1 of water, meaning that marine protein provides current water savings of 4.6%. The importance of these freshwater savings is highly uneven around the globe, with savings ranging from as little as 0 to as much as 50%. The largest savings as a per cent of current water footprints occur in Asia, Oceania, and several coastal African nations. The greatest national water savings from marine fish protein occur in Southeast Asia and the United States. As the human population increases, future water savings from marine fish consumption will be increasingly important to food and water security and depend on sustainable harvest of capture fisheries and low water footprint growth of marine aquaculture. (paper)

Coffee consumption and risk of type 2 diabetes: a systematic review

NARCIS (Netherlands)

van Dam, R.M.; Hu, F.B.

2005-01-01

Context: Emerging epidemiological evidence suggests that higher coffee consumption may reduce the risk of type 2 diabetes. Objective: To examine the association between habitual coffee consumption and risk of type 2 diabetes and related outcomes. Data Sources and Study Selection: We searched MEDLINE

Vermicomposting of source-separated human faeces by Eisenia fetida: effect of stocking density on feed consumption rate, growth characteristics and vermicompost production.

Science.gov (United States)

Yadav, Kunwar D; Tare, Vinod; Ahammed, M Mansoor

2011-06-01

The main objective of the present study was to determine the optimum stocking density for feed consumption rate, biomass growth and reproduction of earthworm Eisenia fetida as well as determining and characterising vermicompost quantity and product, respectively, during vermicomposting of source-separated human faeces. For this, a number of experiments spanning up to 3 months were conducted using soil and vermicompost as support materials. Stocking density in the range of 0.25-5.00 kg/m(2) was employed in different tests. The results showed that 0.40-0.45 kg-feed/kg-worm/day was the maximum feed consumption rate by E. fetida in human faeces. The optimum stocking densities were 3.00 kg/m(2) for bioconversion of human faeces to vermicompost, and 0.50 kg/m(2) for earthworm biomass growth and reproduction. Copyright © 2011 Elsevier Ltd. All rights reserved.

Mixed Waste Management Facility (MWMF) Old Burial Ground (OBG) source control technology and inventory study

Energy Technology Data Exchange (ETDEWEB)

Flach, G.P.; Rehder, T.E.; Kanzleiter, J.P.

1996-10-02

This report has been developed to support information needs for wastes buried in the Burial Ground Complex. Information discussed is presented in a total of four individual attachments. The general focus of this report is to collect information on estimated source inventories, leaching studies, source control technologies, and to provide information on modeling parameters and associated data deficiencies.

Mixed Waste Management Facility (MWMF) Old Burial Ground (OBG) source control technology and inventory study

International Nuclear Information System (INIS)

Flach, G.P.; Rehder, T.E.; Kanzleiter, J.P.

1996-01-01

This report has been developed to support information needs for wastes buried in the Burial Ground Complex. Information discussed is presented in a total of four individual attachments. The general focus of this report is to collect information on estimated source inventories, leaching studies, source control technologies, and to provide information on modeling parameters and associated data deficiencies

Factors affecting wood energy consumption by U.S. households

Science.gov (United States)

Nianfu Song; Francisco X. Aguilar; Stephen R. Shifley; Michael E. Goerndt

2012-01-01

About 23% of energy derived from woody sources in the U.S. was consumed by households, of which 70% was used by households in rural areas in 2005. We investigated factors affecting household-level wood energy consumption in the four continental U.S. regions using data from the U.S. Residential Energy Consumption Survey. To account for a large number of zero...

Association of curry consumption with blood lipids and glucose levels

OpenAIRE

Kwon, Youngjoo

2016-01-01

BACKGROUND/OBJECTIVES Curcumin, an active ingredient in turmeric, is highly consumed in South Asia. However, curry that contains turmeric as its main spice might be the major source of curcumin in most other countries. Although curcumin consumption is not as high in these countries as South Asia, the regular consumption of curcumin may provide a significant health-beneficial effect. This study evaluated whether the moderate consumption of curry can affect blood glucose and lipid levels that b...

Examining the Impact of a Public Health Message on Fish Consumption in Bermuda.

Directory of Open Access Journals (Sweden)

Catherine McLean Pirkle

Full Text Available In 2003 mean cord blood mercury concentrations in pregnant Bermudian women exceeded levels associated with adverse health outcomes in children. The principal mercury source was local fish species. Public health messages were developed suggesting pregnant women reduce consumption of fish species with higher mercury concentrations (e.g. swordfish, substituting species containing lower mercury concentrations, and elevated omega-3 fatty acids (e.g. anchovies. Recent evidence indicates mercury concentrations in Bermuda's pregnant women have fallen five- fold.Assess whether changes in women's fish eating patterns during pregnancy are consistent with the public health messaging. Determine who is making changes to their diet during pregnancy and why.Mixed methods study with a cross-sectional survey of 121 pregnant women, including 13 opened-ended interviews. Health system, social vulnerability, public health messaging, and socio-demographic variables were characterized and related to changes in fish consumption during pregnancy. Qualitative data were coded according to nutritional advice messages, comprehension of communication strategies, and sources of information.95% of women surveyed encountered recommendations about fish consumption during pregnancy. 75% reported modifying fish eating behaviors because of recommendations. Principal sources of information about fish consumption in pregnancy were health care providers and the Internet. 71% of women reported reducing consumption of large fish species with greater mercury levels, but 60% reported reduced consumption of smaller, low mercury fish. No participant mentioned hearing about the benefits of fish consumption. More frequent exposure to public health messages during pregnancy was associated with lower reported consumption. Bermudian born women were less likely to reduce consumption of large fish species during pregnancy.In Bermuda, public health messages advocating reduced consumption of larger

Comments on the Calculations of Specific Electricity and Fuel Consumption

DEFF Research Database (Denmark)

Jørgensen, Kaj

1996-01-01

Calculation of specific consumption of electricity and fuel for model electrical vehicles (passenger cars and vans). Both the present technological level and projected future technological developments. Used as background paper for a review of the scope for electrical vehicles in Denmark, carried...

Pantechnik new superconducting ion source: PantechniK Indian Superconducting Ion Source

International Nuclear Information System (INIS)

Gaubert, G.; Bieth, C.; Bougy, W.; Brionne, N.; Donzel, X.; Leroy, R.; Sineau, A.; Vallerand, C.; Villari, A. C. C.; Thuillier, T.

2012-01-01

The new ECR ion source PantechniK Indian Superconducting Ion Source (PKISIS) was recently commissioned at Pantechnik. Three superconducting coils generate the axial magnetic field configuration, while the radial magnetic field is done with the multi-layer permanent magnets. Special care was devoted to the design of the hexapolar structure, allowing a maximum magnetic field of 1.32 T at the wall of the 82 mm diameter plasma chamber. The three superconducting coils using low temperature superconducting wires are cooled by a single double stage cryo-cooler (4.2 K). Cryogen-free technology is used, providing reliability and easy maintenance at low cost. The maximum installed RF power (18.0 GHz) is of 2 kW. Metallic beams can be produced with an oven (T max = 1400 deg. C) installed with an angle of 5 deg. with respect to the source axis or a sputtering system, mounted on the axis of the source. The beam extraction system is constituted of three electrodes in accel-decel configuration. The new source of Pantechnik is conceived for reaching optimum performances at 18 GHz RF frequencies. PKISIS magnetic fields are 2.1 T axial B inj and 1.32 T radial field in the wall, variable B min with an independent coil and a large and opened extraction region. Moreover, PKISIS integrates modern design concepts, like RF direct injection (2 kW availability), dc-bias moving disk, out-of-axis oven and axial sputtering facility for metal beams. Finally, PKISIS is also conceived in order to operate in a high-voltage platform with minor power consumption.

The relationship between agricultural technology and energy demand in Pakistan

International Nuclear Information System (INIS)

Zaman, Khalid; Khan, Muhammad Mushtaq; Ahmad, Mehboob; Rustam, Rabiah

2012-01-01

The purpose of this study was two fold: (i) to investigate the casual relationship between energy consumption and agricultural technology factors, and (ii) electricity consumption and technological factors in the agricultural sector of Pakistan. The study further evaluates four alternative but equally plausible hypotheses, each with different policy implications. These are: (i) Agricultural technology factors cause energy demand (the conventional view), (ii) energy demand causes technological factors, (iii) There is a bi-directional causality between the two variables and (iv) Both variables are causality independent. By applying techniques of Cointegration and Granger causality tests on energy demand (i.e., total primary energy consumption and electricity consumption) and agricultural technology factors (such as, tractors, fertilizers, cereals production, agriculture irrigated land, high technology exports, livestock; agriculture value added; industry value added and subsides) over a period of 1975–2010. The results infer that tractor and energy demand has bi-directional relationship; while irrigated agricultural land; share of agriculture and industry value added and subsides have supported the conventional view i.e., agricultural technology cause energy consumption in Pakistan. On the other hand, neither fertilizer consumption and high technology exports nor energy demand affect each others. Government should form a policy of incentive-based supports which might be a good policy for increasing the use of energy level in agriculture. - Highlights: ► Find the direction between green technology factors and energy demand in Pakistan. ► The results indicate that there is a strong relationship between them. ► Agriculture machinery and energy demand has bi-directional relationship. ► Green technology causes energy consumption i.e., unidirectional relationship. ► Agriculture expansion is positive related to total primary energy consumption.

Energy Consumption of Information and Communication Technology (ICT) in Germany up to 2010. Summary of the final report

Energy Technology Data Exchange (ETDEWEB)

Cremer, C.; Eichhammer, W.; Friedewald, M.; Georgieff, P.; Rieth-Hoerst, S.; Schlomann, B.; Zoche, P.; Aebischer, B.; Huser, A.

2003-01-01

Increasing power consumption for ICT applications represents a basic risk both with regard to climate protection and against the background of the expected shutdown of nuclear power stations in Germany. On the other hand, the prospects for improved energy use due to ICT applications should not be neglected. These are found in existing electricity saving potentials in the ICT sector itself, which could be exploited to a greater extent, as well as in possibilities to save energy in other sectors through increased use of new ICT applications (e.g. through remote monitoring in the transport sector, in the intelligent home, in energy technology auxiliary systems, especially in contracting and in logistics). Neither aspect has been the subject of much research so far. Nor have the indirect impacts of ICT on energy consumption been analysed to any great extent so far. This is particularly true for transport services which, on the one hand, may become unnecessary due to electronic services (e.g. electronic banking services, telephone conferences, decentralised printing of daily newspapers), but, on the other, may create additional transport services (e.g. e-commerce). (orig.)

Comparison of machine learning methods for estimating energy consumption in buildings

NARCIS (Netherlands)

Mocanu, E.; Nguyen, P.H.; Gibescu, M.; Kling, W.L.

2014-01-01

The increasing number of decentralized renewable energy sources together with the grow in overall electricity consumption introduce many new challenges related to dimensioning of grid assets and supply-demand balancing. Approximately 40% of the total energy consumption is used to cover the needs of

Energy innovation and renewable energy consumption in the correction of air pollution levels

International Nuclear Information System (INIS)

Alvarez-Herranz, Agustin; Balsalobre-Lorente, Daniel; Shahbaz, Muhammad; Cantos, José María

2017-01-01

This study analyses the relationship between economic growth and environmental pollution. Specifically, it investigates the presence of an environmental Kuznets curve (EKC) in 17 OECD countries over the period of 1990–2012. The results confirm the existence of an N-shaped EKC relationship between income and environmental degradation. The study offers a novel methodological contribution that makes it possible to explain the environmental pollution process through the analysis of low-carbon technologies. This demonstrates how income levels affect energy consumption and how higher energy demand leads to a larger share of fossil sources in the energy mix and, thus, increased greenhouse gas (GHG) emissions. The effect on per capita GHG emissions is explored in a model containing a dampening variable that moderates the relationship between energy consumption and income. This empirical evidence helps to explain the interaction between energy regulation, economic growth and carbon emissions. This study also confirms the positive effect that energy innovation process exerts on environmental pollution. Finally, it is noted that renewable energy sources help to improve air quality. - Highlights: • An inverted N-shaped relationship between economic growth and environmental degradation in OECD countries is validated. • Energy regulatory policies exert positive effect on environmental quality. • Energy innovation processes delays the technical obsolescence. • Energy innovation process requires a time lag to become fully efficient.

Survey on the consumptions of energy sources in the industry in Italy in 1999; Indagine sugli impieghi delle fonti energetiche nel settore industria in Italia. Anno 1999

Energy Technology Data Exchange (ETDEWEB)

Iorio, G. [ENEA, Funzione Centrale Studi, Centro Ricerche Casaccia, Rome (Italy); Perrella, G. [ENEA, Divisione Promozione degli Usi Efficienti e Diversificazione dell' Energia, Centro Ricerche Casaccia, Rome (Italy); Ballin, M. [Istituto Nazionale di Statistica, Dipt. Statistiche Economiche, Rome (Italy); Mercanti, A.; Poggi, A. [Ministero delle Attivita' Produttive, Direzione Generale dell' Energia e delle Risorse Minerarie, Rome (Italy)

2001-07-01

This report has the aim to introduce the results of the sampling survey performed to determinate the consumption of energy sources (electricity, natural gas, fuel oil, diesel oil, etc.) in the italian industry. The energy consumptions report to 1999 and they are disaggregated for typology of use: energy consumptions for productive uses, for production of energy and for traction. The energy intensive sectors and the great industries have represented the nucleus of survey. Particular attention has been devoted to the production of energy and the consumption of heat. [Italian] Il presente rapporto ha l'obiettivo di presentare i risultati dell'indagine campionaria effettuata per determinare il consumo di fonti energetiche (energia elettrica, gas naturale, olio combustibile, gasolio, ecc.) nell'industria italiana. I consumi energetici si riferiscono al 1999 e sono disaggregati per tipologia di utilizzo: consumi energetici per usi produttivi, per produzione di energia e per trazione. I settori ad alta intensita' energetica e le grandi imprese hanno rappresentato il nucleo dell'indagine. Particolare attenzione e' stata dedicata alla produzione di energia e al consumo di calore.

Forward Osmosis in India: Status and Comparison with Other Desalination Technologies.

Science.gov (United States)

Mehta, Dhruv; Gupta, Lovleen; Dhingra, Rijul

2014-01-01

With an increase in demand of freshwater and depleting water sources, it is imperative to switch to seawater as a regular source of water supply. However, due to the high total dissolved solid content, it has to be desalinated to make it drinkable. While desalination technologies have been used for many years, mass deployment of such technologies poses a number of challenges like high energy requirements as well as high negative environmental impact through side products and CO2 emissions. The purpose of this paper is to present a sustainable technology for desalination. Forward osmosis, an emerging technology, is compared with the other commonly used technologies worldwide, namely, multieffect distillation, multistage flash distillation, and reverse osmosis as well as other emerging technologies like vapour compression, solar humidification dehumidification, nanofiltration, and freezing desalination. As energy consumption and associated greenhouse gas emissions are one of the major concerns of desalination, this paper concludes that forward osmosis is an emerging sustainable technology for seawater desalination. This paper then presents the challenges involved in the application of forward osmosis in India and presents a plant setup. In the end, the cost comparison of a forward osmosis and reverse osmosis plant has been done and it was concluded that forward osmosis is economically better as well.

Forward Osmosis in India: Status and Comparison with Other Desalination Technologies

Science.gov (United States)

2014-01-01

With an increase in demand of freshwater and depleting water sources, it is imperative to switch to seawater as a regular source of water supply. However, due to the high total dissolved solid content, it has to be desalinated to make it drinkable. While desalination technologies have been used for many years, mass deployment of such technologies poses a number of challenges like high energy requirements as well as high negative environmental impact through side products and CO2 emissions. The purpose of this paper is to present a sustainable technology for desalination. Forward osmosis, an emerging technology, is compared with the other commonly used technologies worldwide, namely, multieffect distillation, multistage flash distillation, and reverse osmosis as well as other emerging technologies like vapour compression, solar humidification dehumidification, nanofiltration, and freezing desalination. As energy consumption and associated greenhouse gas emissions are one of the major concerns of desalination, this paper concludes that forward osmosis is an emerging sustainable technology for seawater desalination. This paper then presents the challenges involved in the application of forward osmosis in India and presents a plant setup. In the end, the cost comparison of a forward osmosis and reverse osmosis plant has been done and it was concluded that forward osmosis is economically better as well. PMID:27350984

The Investments in Renewable Energy Sources: Do Low Carbon Economies Better Invest in Green Technologies?

Directory of Open Access Journals (Sweden)

Antonio Angelo Romano

2011-01-01

Full Text Available The aim of this study is to analyse the driving of investment in renewable energy sources in low carbon and high carbon economies. To address these issues, a dynamic panel analysis of the renewable investment in a sample of 29 countries was proposed. Results demonstrate that the dynamic of investments in renewable sources is similar in the two panels, and depends by nuclear power generation, GDP and technological efficiency. Results show that countries try to reduce their environmental footprint, decreasing the CO2 intensity. Based on the estimation results, we think that energy sustainability passes through the use of renewable resources that can complement the nuclear technology on condition that both exceed their limits.

Students' Attitudes to Paper Consumption in relation to Carbon ...

African Journals Online (AJOL)

Mubanga Kapuka, Riverine Zambia Limited; Overson Shumba, School of ... Keywords: Climate change, paper consumption, education for sustainable ..... International Conference on Future Computational Technologies, Singapore. Buis, A.

Water and Energy Consumption at King Abdullah University of Science and Technology

KAUST Repository

Wiche Latorre, Pia Alexandra

2012-05-01

Saudi Arabia is the greatest exporter of oil in the world and also the country with greatest desalination capacity. It is considered a rich country but not a developed one. Because water is scarce while energy is abundant, it becomes important to evaluate the environmental performance of populations in Saudi Arabia with regards to these two aspects. King Abdullah University of Science and Technology (KAUST) is a gated community in Saudi Arabia with high living standards where water and energy are free of cost (no constraint over use). Four environmental sustainability indicators were used to determine the environmental performance of KAUST in comparison to other countries. It was found that per capita, KAUST is between the five greatest water and energy consumers in the world. Important factors to this result are the fact that KAUST is still under construction, that the peak capacity for permanent residents has not yet been reached and that there is little control over the water and energy systems at KAUST. It was concluded that KAUST should reduce its water and energy consumption per capita. To this means, some proposed solutions were to have wide-spread awareness-raising campaigns to all people working and living in KAUST, and to improve control over air conditioning control systems.

Science and Technology of Future Light Sources

International Nuclear Information System (INIS)

Dierker, S.; Bergmann, U.; Corlett, J.; Dierker, S.; Falcone, R.; Galayda, J.; Gibson, M.; Hastings, J.; Hettel, B.; Hill, J.; Hussain, Z.; Kao, C.-C.; Kirx, J.; Long, G.; McCurdy, B.; Raubenheimer, T.; Sannibale, F.; Seeman, J.; Shen, Z.-X.; Shenoy, G.; Schoenlein, B.; Shen, Q.; Stephenson, B.; Stohr, J.; Zholents, A.

2008-01-01

Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects. The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee (1). These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter together is of

Science and Technology of Future Light Sources

Energy Technology Data Exchange (ETDEWEB)

Bergmann, Uwe; Corlett, John; Dierker, Steve; Falcone, Roger; Galayda, John; Gibson, Murray; Hastings, Jerry; Hettel, Bob; Hill, John; Hussain, Zahid; Kao, Chi-Chang; Kirz, Janos; Long, Danielle; McCurdy, Bill; Raubenheimer, Tor; Sannibale, Fernando; Seeman, John; Shen, Z. -X.; Schenoy, Gopal; Schoenlein, Bob; Shen, Qun; Stephenson, Brian; Stohr, Joachim; Zholents, Alexander

2009-01-28

Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter together is of

Science and Technology of Future Light Sources

Energy Technology Data Exchange (ETDEWEB)

Dierker,S.; Bergmann, U.; Corlett, J.; Dierker, S.; Falcone, R.; Galayda, J.; Gibson, M.; Hastings, J.; Hettel, B.; Hill, J.; Hussain, Z.; Kao, C.-C.; Kirx, J.; Long, G.; McCurdy, B.; Raubenheimer, T.; Sannibale, F.; Seeman, J.; Shen, Z.-X.; Shenoy, g.; Schoenlein, B.; Shen, Q.; Stephenson, B.; Stohr, J.; Zholents, A.

2008-12-01

Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects. The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee [1]. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter together is of

Restriction of Preferences to the Set of Consumption Bundles, In a Model with Production and Consumption Bundles

NARCIS (Netherlands)

Schalk, S.

1999-01-01

In contrast to the neo-classical theory of Arrow and Debreu, a model of a private ownership economy is presented, in which production and consumption bundles are treated separately. Each of the two types of bundles is assumed to establish a con- vex cone. Production technologies can convert

Novel neutralized-beam intense neutron source for fusion technology development

International Nuclear Information System (INIS)

Osher, J.E.; Perkins, L.J.

1983-01-01

We describe a neutralized-beam intense neutron source (NBINS) as a relevant application of fusion technology for the type of high-current ion sources and neutral beamlines now being developed for heating and fueling of magnetic-fusion-energy confinement systems. This near-term application would support parallel development of highly reliable steady-state higher-voltage neutral D 0 and T 0 beams and provide a relatively inexpensive source of fusion neutrons for materials testing at up to reactor-like wall conditions. Beam-target examples described incude a 50-A mixed D-T total (ions plus neutrals) space-charge-neutralized beam at 120 keV incident on a liquid Li drive-in target, or a 50-A T 0 + T + space-charge-neutralized beam incident on either a LiD or gas D 2 target with calculated 14-MeV neutron yields of 2 x 10 15 /s, 7 x 10 15 /s, or 1.6 x 10 16 /s, respectively. The severe local heat loading on the target surface is expected to limit the allowed beam focus and minimum target size to greater than or equal to 25 cm 2

Advanced light source technologies that enable high-volume manufacturing of DUV lithography extensions

Science.gov (United States)

Cacouris, Theodore; Rao, Rajasekhar; Rokitski, Rostislav; Jiang, Rui; Melchior, John; Burfeindt, Bernd; O'Brien, Kevin

2012-03-01

Deep UV (DUV) lithography is being applied to pattern increasingly finer geometries, leading to solutions like double- and multiple-patterning. Such process complexities lead to higher costs due to the increasing number of steps required to produce the desired results. One of the consequences is that the lithography equipment needs to provide higher operating efficiencies to minimize the cost increases, especially for producers of memory devices that experience a rapid decline in sales prices of these products over time. In addition to having introduced higher power 193nm light sources to enable higher throughput, we previously described technologies that also enable: higher tool availability via advanced discharge chamber gas management algorithms; improved process monitoring via enhanced on-board beam metrology; and increased depth of focus (DOF) via light source bandwidth modulation. In this paper we will report on the field performance of these technologies with data that supports the desired improvements in on-wafer performance and operational efficiencies.

An econometric analysis of residential consumption of fuelwood in a mountainous prefecture of Northern Greece

International Nuclear Information System (INIS)

Arabatzis, G.; Malesios, Ch.

2011-01-01

Biomass is a renewable energy source of increasing importance, especially since the energy policies of countries today are largely focused on renewable energy. It is a renewable energy source with significant potential to contribute to the energy needs of modern society, both for developing and developed countries around the world. One very important source of biomass is wood and fuelwood in particular. This article aims at providing an empirical analysis of household fuelwood consumption and the determinants of the choice to use the specific energy for heating and cooking in a district of Northern Greece. In the current empirical analysis several household fuelwood consumption models are employed, such as GLM, Tobit and Heckman regression-based techniques. The results show that household sociological and economical characteristics as well as more general environmental issues are suitable to explain differences towards fuelwood consumption for space heating and cooking. We additionally evaluate the household fuelwood consumption for heating through the statistical analyses conducted. - Highlights: ► In this study we provide an empirical analysis of household fuel wood consumption. ► Determinants of the choice of specific energy for heating/cooking in Northern Greece are examined. ► Several household fuelwood consumption models are employed (GLM, Tobit and Heckman). ► Household's sociological/economical characteristics are suitable to explain fuel wood consumption. ► Also more general environmental issues explain differences towards fuel wood consumption.

Fiscal 1999 research report. Research on photonic measurement and processing technology (Development of high- efficiency production process technology); 1999 nendo foton keisoku kako gijutsu seika hokokusho. Kokoritsu seisan process gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 research result on R and D of laser processing technology, in-situ measurement technology, and generation and control technology of photon as laser beam source, for energy saving and efficiency improvement of energy-consumptive production processes such as welding, jointing, surface treatment and fine particle fabrication. The research was carried out by a technical center, 9 companies and a university as contract research. The research themes are as follows: (1) Processing technology: simulation technology for laser welding phenomena, synthesis technology for quantum dot functional structures, and fabrication technology for functional composite materials, (2) In-situ measurement technology: fine particle element and size measurement technology, (3) All- solid state laser technology: efficient rod type LD-pumping laser module, pumping chamber of slab type laser, improvement of E/O efficiency of laser diode, high-quality nonlinear crystal growth technology, fabrication technology for nonlinear crystals, and high-efficiency harmonic generation technology. Comprehensive survey was also made on high- efficiency photon generation technologies. (NEDO)

Energy consumption in smelting reduction (SR) processes

International Nuclear Information System (INIS)

Assis, Paulo Santos; Salierno, Giovanni Felice; Fang, Jue; Mankhand, Tilak R.; Assis, Carlos Frederico Campos de

2010-01-01

In contrast, conventional processes use coke and hematite/sinter in the blast furnace, in SR processes, other alternative fuels and iron ore sources, like charcoal and fine iron ores, can be used to produce sponge iron. The use of these alternative sources, by SR processes, can reduce environmental impacts and lower production costs. At first, the concepts of the theoretical gas utilization ratio, the smelting heat of the iron ore and the effective calorific value of coal were introduced. Then, the reason for gas utilization ratio and its performance in the shaft as a reducer in the smelting process are discussed and calculated. The relationship between coal consumption and iron ore reduction in the fluidized bed are also discussed. Finally, the influence of post-combustion on coal consumption in an iron bath furnace are calculated and discussed. (author)

Research and application for wastewater treatment technology in a southern uranium mine

International Nuclear Information System (INIS)

Tan Jianhua; Zhao Jinfang; Huang Yunbai; Deng Jianguo

2014-01-01

This paper analyzes the source and property of a southern uranium mine's drainage and the treatment technology is tested, and proposed by employing the process of '408 (Ⅱ) resin adsorption-NaCl + NaHCO 3 elution '. The results show that the treated drainage can meet the emission requirement of Regulations for radiation and environment protection in uranium mining and milling (GB23727-2009), with the uranium content being less than 0.3 mg/L -l . The econo-technical norms such as material consumption are improved as the new technology has been applied in practical production. (authors)

Deep ultraviolet semiconductor light sources for sensing and security

Science.gov (United States)

Shatalov, Max; Bilenko, Yuri; Yang, Jinwei; Gaska, Remis

2009-09-01

III-Nitride based deep ultraviolet (DUV) light emitting diodes (LEDs) rapidly penetrate into sensing market owing to several advantages over traditional UV sources (i.e. mercury, xenon and deuterium lamps). Small size, a wide choice of peak emission wavelengths, lower power consumption and reduced cost offer flexibility to system integrators. Short emission wavelength offer advantages for gas detection and optical sensing systems based on UV induced fluorescence. Large modulation bandwidth for these devices makes them attractive for frequency-domain spectroscopy. We will review present status of DUV LED technology and discuss recent advances in short wavelength emitters and high power LED lamps.

The humanity at the frontiers with new technologies for sustained energy production

International Nuclear Information System (INIS)

Florescu, Gheorghe; Agapi, Constantin; Mircea, Ioan; Gyongyosi, Tiberiu; Panaitescu, Valeriu; Florescu, Ioan-Bogdan

2009-01-01

The international scientific community is engaged in dealing with the actual nuclear research issues and in finding new ways for continuous and raising energy production. The big energy consumption and occurrence of new large consumers, especially in Asian countries, impose finding new solutions for clean, large scale and sustained energy production. The new technologies and scientific discoveries, also the international cooperation, offer opportunities to eliminate the actual barriers in order to cumulate and use advanced energy production processes, to find new energy sources and to build improved power plants. The paper presents the actual state of the art in the field of new technologies for nuclear power sources, the steps to be undertaken in order to penetrate the actual barriers for large scale energy production. In the paper are also presented: the actual energy production issues; the key arguments that could be used to sustain R and D for finding new energy sources; the actual limitations in industrial processes knowledge and use. (authors)

Tweeting : Smart meters raise awareness of energy consumption in buildings

Energy Technology Data Exchange (ETDEWEB)

Anon.

2009-11-15

The University of Mississippi (UM) will monitor, analyze and report on energy consumption in its campus buildings in real-time using SmartSynch Smart Meters. The technology uses smart meter data to help identify a detailed pattern of electricity usage with the objective of finding methods to alter behaviour to reduce electricity usage and carbon emissions. SmartSynch installed 16 Smart Meters on campus with additional deployments being planned. The technology will enable the university to monitor energy consumption, track building power performance over time, compare building energy usage, and review the impact of the weather on energy use while reducing its carbon footprint. Additionally, UM will use Facebook, Twitter and an RSS feed to provide regular public updates on its buildings' energy consumption based on SmartSynch Smart Meter data. Each building will have its own profile on the social networking sites. 1 ref., 1 fig.

Tweeting : Smart meters raise awareness of energy consumption in buildings

Energy Technology Data Exchange (ETDEWEB)

Anon,

2009-11-15

The University of Mississippi (UM) will monitor, analyze and report on energy consumption in its campus buildings in real-time using SmartSynch Smart Meters. The technology uses smart meter data to help identify a detailed pattern of electricity usage with the objective of finding methods to alter behaviour to reduce electricity usage and carbon emissions. SmartSynch installed 16 Smart Meters on campus with additional deployments being planned. The technology will enable the university to monitor energy consumption, track building power performance over time, compare building energy usage, and review the impact of the weather on energy use while reducing its carbon footprint. Additionally, UM will use Facebook, Twitter and an RSS feed to provide regular public updates on its buildings' energy consumption based on SmartSynch Smart Meter data. Each building will have its own profile on the social networking sites. 1 ref., 1 fig.

Youth Digital Cultural Consumption and Education

Directory of Open Access Journals (Sweden)

Mónica Pini

2014-12-01

Full Text Available Media and technological devices function as socializing agents during children’s leisure and entertainment time. Drawing from the theory of cultural consumption, a socio educational approach to students’ digital practices, and media literacy, this qualitative study seeks to explore and describe students’ cultural consumption profile. The authors explore the representations and meanings of digital practices of public school students of a predominately working class neighborhood situated in the periphery of Buenos Aires, Argentina. Findings highlight different aspects of youth cultural consumption profile. Two themes were identified: a children use computers for a multiplicity of different activities enacting multitasking practices; and b children develop new forms of digital practices for social digital interaction that are expressed in the “need” to be connected, the production and use of shared codes and the establishment of ambivalent relations with social media platforms. Implications for education are explored.''

Total energy consumption in Finland increased by one percent

International Nuclear Information System (INIS)

Timonen, L.

2000-01-01

The total energy consumption in Finland increased by less than a percent in 1999. The total energy consumption in 1999 was 1310 PJ corresponding to about 31 million toe. The electric power consumption increased moderately by 1.6%, which is less than the growth of the gross national product (3.5%). The final consumption of energy grew even less, only by 0.5%. Import of electric power increased by 19% in 1999. The import of electric power was due to the availability of low-priced electric power on the Nordic electricity markets. Nuclear power generation increased by 5% and the consumption of wood-based fuels by 3%. The increment of the nuclear power generation increased because of the increased output capacity and good operability of the power plants. Wind power production doubles, but the share of it in the total energy consumption is only about 0.01%. The peat consumption decreased by 12% and the consumption of hydroelectric power by 15%. The decrease in production of hydroelectric power was compensated by an increase import of electric power. The consumption of fossil fuels, coal, oil and natural gas remained nearly the same as in 1998. The gasoline consumption, however, decreased, but the consumption of diesel oil increased due to the increased road transport. The share of the fossil fuels was nearly half of the total energy consumption. The consumption of renewable energy sources remained nearly the same, in 23% if the share of peat is excluded, and in 30% if the share of peat is included. Wood-based fuels are the most significant type of renewable fuels. The share of them in 1999 was over 80% of the total usage of the renewable energy sources. The carbon dioxide emissions in Finland decreased in 1999 by 1.0 million tons. The total carbon dioxide emissions were 56 million tons. The decrease was mainly due to the decrease of the peat consumption. The final consumption of energy increased by 0.5%, being hence about 1019 PJ. Industry is the main consumer of energy

Water Use in Enhanced Geothermal Systems (EGS): Geology of U.S. Stimulation Projects, Water Costs, and Alternative Water Source Policies

Energy Technology Data Exchange (ETDEWEB)

Harto, C. B. [Argonne National Lab. (ANL), Argonne, IL (United States); Schroeder, J. N. [Argonne National Lab. (ANL), Argonne, IL (United States); Horner, R. M. [Argonne National Lab. (ANL), Argonne, IL (United States); Patton, T. L. [Argonne National Lab. (ANL), Argonne, IL (United States); Durham, L. A. [Argonne National Lab. (ANL), Argonne, IL (United States); Murphy, D. J. [Argonne National Lab. (ANL), Argonne, IL (United States); Clark, C. E. [Argonne National Lab. (ANL), Argonne, IL (United States)

2014-10-01

According to the Energy Information Administration (EIA) of the U.S. Department of Energy (DOE), geothermal energy generation in the United States is projected to more than triple by 2040 (EIA 2013). This addition, which translates to more than 5 GW of generation capacity, is anticipated because of technological advances and an increase in available sources through the continued development of enhanced geothermal systems (EGSs) and low-temperature resources (EIA 2013). Studies have shown that air emissions, water consumption, and land use for geothermal electricity generation have less of an impact than traditional fossil fuel–based electricity generation; however, the long-term sustainability of geothermal power plants can be affected by insufficient replacement of aboveground or belowground operational fluid losses resulting from normal operations (Schroeder et al. 2014). Thus, access to water is therefore critical for increased deployment of EGS technologies and, therefore, growth of the geothermal sector. This paper examines water issues relating to EGS development from a variety of perspectives. It starts by exploring the relationship between EGS site geology, stimulation protocols, and below ground water loss, which is one of the largest drivers of water consumption for EGS projects. It then examines the relative costs of different potential traditional and alternative water sources for EGS. Finally it summarizes specific state policies relevant to the use of alternative water sources for EGS, and finally explores the relationship between EGS site geology, stimulation protocols, and below ground water loss, which is one of the largest drivers of water consumption for EGS projects.

Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds

Directory of Open Access Journals (Sweden)

Mahesha M. Poojary

2016-11-01

Full Text Available Marine microalgae and seaweeds (microalgae represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield, selectivity (purity, high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

News media consumption among immigrants in Europe

DEFF Research Database (Denmark)

Christiansen, Connie Carøe

2004-01-01

In recent years, especially with the advent of Digital Broadcasting Technology, transnational media has become central in the consumption of news by immigrant populations. This has received some attention as a factor associated with lack of integration into their new societies. The present article...

Consumptive water footprint and virtual water trade scenarios for China - With a focus on crop production, consumption and trade.

Science.gov (United States)

Zhuo, La; Mekonnen, Mesfin M; Hoekstra, Arjen Y

2016-09-01

The study assesses green and blue water footprints (WFs) and virtual water (VW) trade in China under alternative scenarios for 2030 and 2050, with a focus on crop production, consumption and trade. We consider five driving factors of change: climate, harvested crop area, technology, diet, and population. Four scenarios (S1-S4) are constructed by making use of three of IPCC's shared socio-economic pathways (SSP1-SSP3) and two of IPCC's representative concentration pathways (RCP 2.6 and RCP 8.5) and taking 2005 as the baseline year. Results show that, across the four scenarios and for most crops, the green and blue WFs per tonne will decrease compared to the baseline year, due to the projected crop yield increase, which is driven by the higher precipitation and CO2 concentration under the two RCPs and the foreseen uptake of better technology. The WF per capita related to food consumption decreases in all scenarios. Changing to the less-meat diet can generate a reduction in the WF of food consumption of 44% by 2050. In all scenarios, as a result of the projected increase in crop yields and thus overall growth in crop production, China will reverse its role from net VW importer to net VW exporter. However, China will remain a big net VW importer related to soybean, which accounts for 5% of the WF of Chinese food consumption (in S1) by 2050. All scenarios show that China could attain a high degree of food self-sufficiency while simultaneously reducing water consumption in agriculture. However, the premise of realizing the presented scenarios is smart water and cropland management, effective and coherent policies on water, agriculture and infrastructure, and, as in scenario S1, a shift to a diet containing less meat. Copyright © 2016 Elsevier Ltd. All rights reserved.

Exploring utility organization electricity generation, residential electricity consumption, and energy efficiency: A climatic approach

International Nuclear Information System (INIS)

Craig, Christopher A.; Feng, Song

2017-01-01

Highlights: • Study examined impact of electricity fuel sources and consumption on emissions. • 97.2% of variability in emissions explained by coal and residential electricity use. • Increasing cooling degree days significantly related to increased electricity use. • Effectiveness of state-level energy efficiency programs showed mixed results. - Abstract: This study examined the impact of electricity generation by fuel source type and electricity consumption on carbon emissions to assess the role of climatic variability and energy efficiency (EE) in the United States. Despite high levels of greenhouse gas emissions, residential electricity consumption continues to increase in the United States and fossil fuels are the primary fuel source of electricity generation. 97.2% of the variability in carbon emissions in the electricity industry was explained by electricity generation from coal and residential electricity consumption. The relationships between residential electricity consumption, short-term climatic variability, long-term climatic trends, short-term reduction in electricity from EE programs, and long-term trends in EE programs was examined. This is the first study of its nature to examine these relationships across the 48 contiguous United States. Inter-year and long-term trends in cooling degree days, or days above a baseline temperature, were the primary climatic drivers of residential electricity consumption. Cooling degree days increased across the majority of the United States during the study period, and shared a positive relationship with residential electricity consumption when findings were significant. The majority of electricity reduction from EE programs was negatively related to residential electricity consumption where findings were significant. However, the trend across the majority of states was a decrease in electricity reduction from EE while residential electricity consumption increased. States that successfully reduced consumption

Fuelwood consumption in Newfoundland

Energy Technology Data Exchange (ETDEWEB)

1979-01-01

Fuelwood consumption increased in Newfoundland in the 1970's, but although cutting permits were issued for Crown land, most forests were privately leased and no overall figures were available on the annual cut for domestic use. A personal interview telephone survey was therefore implemented in which householders were questioned on how much wood they burned, when they started burning wood, type of stove and wood used, expected consumption in 1978-79, other sources of heat, employment, and distance travelled to obtain wood. Survey methods and results obtained are presented. Woodburning households increased from about 22,000 before 1973 to about 32,000 in 1977-78 and a further increase to about 39,500 was expected in 1978-79. In 1977-78, 462,571 stacked cubic metres of roundwood were burned on the island. Softwood comprised 69% of this total.

Maximizing cellulosic ethanol potentials by minimizing wastewater generation and energy consumption: Competing with corn ethanol.

Science.gov (United States)

Liu, Gang; Bao, Jie

2017-12-01

Energy consumption and wastewater generation in cellulosic ethanol production are among the determinant factors on overall cost and technology penetration into fuel ethanol industry. This study analyzed the energy consumption and wastewater generation by the new biorefining process technology, dry acid pretreatment and biodetoxification (DryPB), as well as by the current mainstream technologies. DryPB minimizes the steam consumption to 8.63GJ and wastewater generation to 7.71tons in the core steps of biorefining process for production of one metric ton of ethanol, close to 7.83GJ and 8.33tons in corn ethanol production, respectively. The relatively higher electricity consumption is compensated by large electricity surplus from lignin residue combustion. The minimum ethanol selling price (MESP) by DryPB is below $2/gal and falls into the range of corn ethanol production cost. The work indicates that the technical and economical gap between cellulosic ethanol and corn ethanol has been almost filled up. Copyright © 2017 Elsevier Ltd. All rights reserved.

Survey on the consumptions of energy sources in the tertiary sector in Italy in 1999; Indagine sui consumi di fonti energetiche nel settore terziario in Italia. Anno 1999

Energy Technology Data Exchange (ETDEWEB)

Iorio, G. [ENEA, Funzione Centrale Studi, Centro Ricerche Casaccia, Rome (Italy); Perrella, G. [ENEA, Divisione Promozione degli Usi Efficienti e Diversificazione dell' Energia, Centro Ricerche Casaccia, Rome (Italy); Ballin, M. [Istituto Nazionale di Statistica, Dipt. Statistiche Economiche, Rome (Italy)

2001-07-01

This report has the aim to introduce the results of the sampling survey performed to determinate the consumption of energy sources (electricity, natural gas, fuel oil, diesel oil, etc.) in the tertiary sector. The energy consumptions report to 1999 and they are disaggregated for typology of use: energy consumptions for productive uses, for production of energy and for traction. The economic energy intensive activities have represented the nucleus of the survey. Particular attention has been devoted to the production of energy and the consumption of heat. [Italian] Il presente rapporto ha l'obiettivo di presentare i risultati dell'indagine campionaria effettuata per determinare il consumo di fonti energetiche (energia elettrica, gas naturale, olio combustibile, gasolio, ecc.) nel settore terziario. I consumi energetici si riferiscono al 1999 e sono disaggregati per tipologia di utilizzo: consumi energetici per usi produttivi, per produzione di energia e per trazione. Le attivita' economiche ad alta intensita' energetica hanno rappresentato il nucleo dell'indagine. Particolare attenzione e' stata dedicata alla produzione di energia e al consumo di calore.

Survey on the consumptions of energy sources in the tertiary sector in Italy in 1999; Indagine sui consumi di fonti energetiche nel settore terziario in Italia. Anno 1999

Energy Technology Data Exchange (ETDEWEB)

Iorio, G [ENEA, Funzione Centrale Studi, Centro Ricerche Casaccia, Rome (Italy); Perrella, G [ENEA, Divisione Promozione degli Usi Efficienti e Diversificazione dell' Energia, Centro Ricerche Casaccia, Rome (Italy); Ballin, M [Istituto Nazionale di Statistica, Dipt. Statistiche Economiche, Rome (Italy)

2001-07-01

This report has the aim to introduce the results of the sampling survey performed to determinate the consumption of energy sources (electricity, natural gas, fuel oil, diesel oil, etc.) in the tertiary sector. The energy consumptions report to 1999 and they are disaggregated for typology of use: energy consumptions for productive uses, for production of energy and for traction. The economic energy intensive activities have represented the nucleus of the survey. Particular attention has been devoted to the production of energy and the consumption of heat. [Italian] Il presente rapporto ha l'obiettivo di presentare i risultati dell'indagine campionaria effettuata per determinare il consumo di fonti energetiche (energia elettrica, gas naturale, olio combustibile, gasolio, ecc.) nel settore terziario. I consumi energetici si riferiscono al 1999 e sono disaggregati per tipologia di utilizzo: consumi energetici per usi produttivi, per produzione di energia e per trazione. Le attivita' economiche ad alta intensita' energetica hanno rappresentato il nucleo dell'indagine. Particolare attenzione e' stata dedicata alla produzione di energia e al consumo di calore.

New renewable energy sources and efficient power consumption at NOK: Promoting - testing - informing. Neue erneuerbare Energien und rationelle Stromanwendung bei den NOK: Foerdern - Pruefen - Informieren

Energy Technology Data Exchange (ETDEWEB)

Kueffer, K; Baumberger, H [Nordostschweizerische Kraftwerke AG (NOK), Baden (Switzerland)

1991-09-18

In accordance with the operating principles, the Nordostschweizerische Kraftwerke (NOK) has decided on a comprehensive programme dedicated to opening up new sources of renewable energy and also to reducing demand by means of efficient power consumption. Intensive promotion, testing and information should ensure that, on the one hand, a premature condemnation of both possibilities and, on the other hand, exaggerated hopes can be avoided. (orig.).

Consumption governance toward more sustainable consumption

NARCIS (Netherlands)

Wahlen, S.; Dubuisson-Quellier, Sophie

2018-01-01

This article deliberates on strategies of consumption governance toward more sustainable consumption. We discuss theoretical concepts stemming from various social science perspectives to (1) promote more sustainable consumption, (2) compare strategies stemming from individualist understanding of

Electron cyclotron resonance plasmas and electron cyclotron resonance ion sources: Physics and technology (invited)

International Nuclear Information System (INIS)

Girard, A.; Hitz, D.; Melin, G.; Serebrennikov, K.

2004-01-01

Electron cyclotron resonance (ECR) ion sources are scientific instruments particularly useful for physics: they are extensively used in atomic, nuclear, and high energy physics, for the production of multicharged beams. Moreover, these sources are also of fundamental interest for plasma physics, because of the very particular properties of the ECR plasma. This article describes the state of the art on the physics of the ECR plasma related to multiply charged ion sources. In Sec. I, we describe the general aspects of ECR ion sources. Physics related to the electrons is presented in Sec. II: we discuss there the problems of heating and confinement. In Sec. III, the problem of ion production and confinement is presented. A numerical code is presented, and some particular and important effects, specific to ECR ion sources, are shown in Sec. IV. Eventually, in Sec. V, technological aspects of ECR are presented and different types of sources are shown

RENEWABLE ENERGY SOURCES IN POLAND - CONDITIONS AND POSSIBILITES OF DEVELOPMENT

Energy Technology Data Exchange (ETDEWEB)

Gawlik, L.; Mokrzycki, E.; Ney, R.

2007-07-01

The paper describes the state of the art in renewable energy sources development. The obligation resulting from the membership of Poland in the European Union as well as from other international agreements in the scope of renewable energy sources development are described. The production of electricity, heat and biofuels in Poland is given and the perspectives of development of particular renewable energy sources in Poland are discussed in the view of potential reserves and other constrains. The economic aspects of renewable energy technologies are shown. The environmental pros and cons of biomass energy development are described. Arguments for development of renewable energy sources use are stated: the decrease of dependence from primary energy sources, the decrease the emission of green house gases and the recovery of agricultural regions of the country. In conclusion it is stated that the significance of renewable energy sources in Polish conditions is constrained to local societies. Their development should be adjusted to conditions predominating in a given region and that wider consumption of renewable energy sources should develop in conformity with sustainable development, so it is necessary to reach agreement between local societies, institutions dealing with environment protection and representatives of power sector. (auth)

Cryogenic technology review of cold neutron source facility for localization

Energy Technology Data Exchange (ETDEWEB)

Lee, Hun Cheol; Park, D. S.; Moon, H. M.; Soon, Y. P. [Daesung Cryogenic Research Institute, Ansan (Korea); Kim, J. H. [United Pacific Technology, Inc., Ansan (Korea)

1998-02-01

This Research is performed to localize the cold neutron source(CNS) facility in HANARO and the report consists of two parts. In PART I, the local and foreign technology for CNS facility is investigated and examined. In PART II, safety and licensing are investigated. CNS facility consists of cryogenic and warm part. Cryogenic part includes a helium refrigerator, vacuum insulated pipes, condenser, cryogenic fluid tube and moderator cell. Warm part includes moderator gas control, vacuum equipment, process monitoring system. Warm part is at high level as a result of the development of semiconductor industries and can be localized. However, even though cryogenic technology is expected to play a important role in developing the 21st century's cutting technology, it lacks of specialists and the research facility since the domestic market is small and the research institutes and government do not recognize the importance. Therefore, it takes a long research time in order to localize the facility. The safety standard of reactor for hydrogen gas in domestic nuclear power regulations is compared with that of the foreign countries, and the licensing method for installation of CNS facility is examined. The system failure and its influence are also analyzed. 23 refs., 59 figs., 26 tabs. (Author)

Sources of Water Supply and Water Quality for Local Consumption: The Case Study of Eco-Tourism Village, Suan Luang Sub- District Municipality, Ampawa District, Samut Songkram Province, Thailand

OpenAIRE

Paiboon Jeamponk; Tasanee Ponglaa; Patchapon Srisanguan

2014-01-01

The aim of this research paper was based on an examination of sources of water supply and water quality for local consumption, conducted at eco- tourism villages of Suan Luang Sub- District Municipality of Amphawa District, Samut Songkram Province. The study incorporated both questionnaire and field work of water testing as the research tool and method. The sample size of 288 households was based on the population of the district, whereas the selected sample water sources were from 60 househo...

Biological risks associated with consumption of reptile products

DEFF Research Database (Denmark)

Magnino, S.; Colin, P.; Dei-Cas, E.

2009-01-01

recently increased in some areas of the world. Biological risks associated with the consumption of products from both farmed and wild reptile meat and eggs include infections caused by bacteria (Salmonella spp., Vibrio spp.). parasites (Spirometra, Trichinella, Gnathostoma, pentastomids), as well...... to increase the occurrence of biological hazards in reptile meat. Application of GHP, GMP and HACCP procedures, respectively at farm and slaughterhouse level, is crucial for controlling the hazards.......The consumption of a wide variety of species of reptiles caught from the wild has been an important source of protein for humans world-wide for millennia. Terrapins. snakes, lizards, crocodiles and iguanas are now farmed and the consumption and trade of their meat and other edible products have...

Energy consumption: energy consumption in mainland Norway

Energy Technology Data Exchange (ETDEWEB)

Magnussen, Inger Helene; Killingland, Magnus; Spilde, Dag

2012-07-25

The purpose of this report is to describe trends in energy consumption in mainland Norway, with an emphasis on key trends within the largest consumer groups. We also explain common terms and concepts in the field of energy consumption. Finally, we look at forecasts for future energy consumption, produced by bodies outside NVE. Total final energy consumption in mainland Norway in 2009 was 207 TWh. The most important end-user groups are households, service industries, manufacturing industry and transport. In addition, the energy sector in mainland Norway consumed 15 TWh. Energy consumed in the energy sector is not considered as final consumption, as the energy is used to produce new energy products. The long-term trend in energy consumption in mainland Norway is that fuel in the transport sector and electricity for the energy sector increases, while energy consumption in other sectors flattens out. The main reason for an increased use of fuel in the transport sector is the rise in the number of motorised machinery and vehicles in mainland Norway. This has caused a rise in gasoline and diesel consumption of 75 per cent since 1976. The petroleum sector is the largest consumer of energy within the energy sector in mainland Norway, and electricity from onshore to platforms in the North Sea and to new shore side installations has led to a rise in electricity consumption from 1 TWh in 1995 to 5 TWh in 2009. The energy consumption in households showed flat trend from 1996 to 2009, after many years of growth. The main reasons are a warmer climate, higher energy prices, the use of heats pumps and more energy-efficient buildings. In the service industries, the growth in energy consumptions has slightly decreased since the late 1990s, for much the same reasons as for households. In manufacturing industries the energy consumption have flatten out mainly due to the closure of energy-intensive businesses and the establishment of new more energy-efficient businesses. Electricity is

Work-related consumption drivers and consumption at work

DEFF Research Database (Denmark)

Røpke, Inge

2004-01-01

The main message in this paper is that the discussion on sustainable consumption should also incorporate the consumption that occurs in relation to work and, more generally, the relationship between consumption at work and consumption at home. I start by considering how domestic consumption...... is encouraged by work-related factors and continue to consider how consumption activities occur in the workplace, so illustrating that production and consumption are intertwined. The main part of the paper deals in detail with the conceptual distinction between production and consumption. Inspiration is drawn...... from both ecology and economics with focus on some important predecessors for ecological economics. I conclude with reflections on how to proceed with consumption studies to provide the basis for promoting more sustainable life patterns....

Demographic determinants of energy consumption in the European Union: Econometric analysis results

Directory of Open Access Journals (Sweden)

Petrović Predrag

2017-01-01

Full Text Available Over the past several decades there has been a strong intensifying trend of human society impact on ecosystems, consumption of natural resources and global change. The environmental impact of the society is fully apparent and dominantly implemented through various greenhouse gases emissions (GHG, leading towards global climate change with considerably spread harmful effects. Global climate change includes the earth and ocean surface and atmospheric warming, but also melting of snow and ice, increase of sea levels and ocean acidity, as well as ever more common natural phenomena extremes (winds, various forms of rainfall/precipitation, extremely low or high temperatures, etc.. Scientists are well-familiarized with the fact that use of fossil fuels, such as oil derivatives and coal, is the main generator of harmful gases. In addition, possible substitutions for fossil fuels in the form of other energy sources are very limited, and it should be remembered that other energy sources also have certain adverse environmental effects. Bearing in mind climate change caused by products of fossil fuels combustion, as well as inevitable depletion of natural crude oil resources, management of growing global energy demand becomes one of the key goals and challenges of 21st century. If these reasons are coupled with obligations emanating from Kyoto Protocol, it is clear that attention of researches should be more than reasonably focused on the main determinants of energy consumption. This study is focused on illumination of key demographic and economic determinants of energy consumption in 28 EU member states in the period 1960- 2014. The results obtained demonstrate that population positively and quite strongly influence total energy consumption. An increase of population of 1% will result in an increase of energy consumption of 1.59% to 1.76%. Such relation most probably can be explained by the fact that demographic growth of the society aggravates and

Advanced imaging technology using carbon nanotube x ray source

International Nuclear Information System (INIS)

Choi, Hae Young; Seol, Seung Kown; Kim, Jaehoon; Yoo, Seung Hoon; Kim, Jong Uk

2008-01-01

Recently, X ray imaging technology is a useful and leading medical diagnostic tool for healthcare professionals to diagnose disease in human body. CNTs(i.e. carbon nanotubes)are used in many applications like FED, Micro wave amplifier, X ray source, etc. because of its suitable electrical, chemical and physical properties. Specially, CNTs are well used electron emitters for x ray source. Conventionally, thermionic type of tungsten filament x ray tube is widely employed in the field of bio medical and industrial application fields. However, intrinsic problems such as, poor emission efficiency and low imaging resolution cause the limitation of use of the x ray tube. To fulfill the current market requirement specifically for medical diagnostic field, we have developed rather a portable and compact CNT based x ray source in which high imaging resolution is provided. Electron sources used in X ray tubes should be well focused to the anode target for generation of high quality x ray. In this study, Pierce type x ray generation module was tested based its simulation results using by OPERA 3D code. Pierce type module is composed of cone type electrical lens with its number of them and inner angles of them that shows different results with these parameters. And some preliminary images obtained using the CNT x ray source were obtained. The represented images are the finger bone and teeth in human body. It is clear that the trabeculation shape is observed in finger bone. To obtain the finger bone image, tube currents of 250A at 42kV tube voltage was applied. The human tooth image, however, is somewhat unclear because the supplied voltage to the tube was limited to max. 50kV in the system developed. It should be noted that normally 60∼70kV of tube voltage is supplied in dental imaging. Considering these it should be emphasized that if the tube voltage is over 60kV then clearer image is possible. In this paper, we are discussed comparing between these experiment results and

Turkey's net energy consumption

International Nuclear Information System (INIS)

Soezen, Adnan; Arcaklioglu, Erol; Oezkaymak, Mehmet

2005-01-01

The main goal of this study is to develop the equations for forecasting net energy consumption (NEC) using an artificial neural-network (ANN) technique in order to determine the future level of energy consumption in Turkey. In this study, two different models were used in order to train the neural network. In one of them, population, gross generation, installed capacity and years are used in the input layer of the network (Model 1). Other energy sources are used in input layer of network (Model 2). The net energy consumption is in the output layer for two models. Data from 1975 to 2003 are used for the training. Three years (1981, 1994 and 2003) are used only as test data to confirm this method. The statistical coefficients of multiple determinations (R 2 -value) for training data are equal to 0.99944 and 0.99913 for Models 1 and 2, respectively. Similarly, R 2 values for testing data are equal to 0.997386 and 0.999558 for Models 1 and 2, respectively. According to the results, the net energy consumption using the ANN technique has been predicted with acceptable accuracy. Apart from reducing the whole time required, with the ANN approach, it is possible to find solutions that make energy applications more viable and thus more attractive to potential users. It is also expected that this study will be helpful in developing highly applicable energy policies

Managing intermittent sources of electricity: the prospects opened by research

International Nuclear Information System (INIS)

Bigot, Bernard

2013-01-01

Beyond the difficult question of foreseeing the additional cost of placing one kWh of electricity on the grid - a cost that must be kept as low as possible to improve the technology for harnessing and converting energy - the growing share of electricity from renewable energy sources in national consumption (initially in replacement of fossil fuels) raises questions for research. How to limit the factors that make most of these forms of energy intermittent? One solution involves developing local or centralized storage capacities that are technically and economically efficient. Another proposal has to do with introducing information technology in electricity grids and electric appliances in order to reverse the currently prevailing rationale so that demand adjusts to supply, and not the reverse, in proportions that, though probably limited, are indispensable

Field Operations and Enforcement Manual for Air Pollution Control. Volume II: Control Technology and General Source Inspection.

Science.gov (United States)

Weisburd, Melvin I.

The Field Operations and Enforcement Manual for Air Pollution Control, Volume II, explains in detail the following: technology of source control, modification of operations, particulate control equipment, sulfur dioxide removal systems for power plants, and control equipment for gases and vapors; inspection procedures for general sources, fuel…

Plasma-surface interaction in negative hydrogen ion sources

Science.gov (United States)

Wada, Motoi

2018-05-01

A negative hydrogen ion source delivers more beam current when Cs is introduced to the discharge, but a continuous operation of the source reduces the beam current until more Cs is added to the source. This behavior can be explained by adsorption and ion induced desorption of Cs atoms on the plasma grid surface of the ion source. The interaction between the ion source plasma and the plasma grid surface of a negative hydrogen ion source is discussed in correlation to the Cs consumption of the ion source. The results show that operation with deuterium instead of hydrogen should require more Cs consumption and the presence of medium mass impurities as well as ions of the source wall materials in the arc discharge enlarges the Cs removal rate during an ion source discharge.

Use a renewable energy sources and latest power-saving technologies in the the Republic Kazakstan

International Nuclear Information System (INIS)

Gulevich, N.V.

1996-01-01

The subject of alternative power in Kazakstan is brought up. Wind-, hydro-, solar power, biogas installation can improve the Republic power base. The main directions of activity of A. Einstein International Power engineering Academy on involving renewable energy sources and latest power-saving technologies to Republic of Kazakstan's fuel-power balance is given. It should be noted that renewable power engineering usually handles reversible energy sources and reserved power cycles. (author)

Increasing Household Protein Consumption Through Minilivestock ...

African Journals Online (AJOL)

Mini-livestock production can be a major contributor of a more balanced diet for both rural and urban settlements. The attributes of mini-livestock gives it the potential of increasing household protein consumption as well as being a source of income. Mini-livestock production can be practiced in rural and urban settlements ...

A High Resolution Technology-based Emissions Inventory for Nepal: Present and Future Scenario

Science.gov (United States)

Sadavarte, P.; Das, B.; Rupakheti, M.; Byanju, R.; Bhave, P.

2016-12-01

A comprehensive regional assessment of emission sources is a major hindrance for a complete understanding of the air quality and for designing appropriate mitigation solutions in Nepal, a landlocked country in foothills of the Himalaya. This study attempts, for the first time, to develop a fine resolution (1km × 1km) present day emission inventory of Nepal with a higher tier approach using our understanding of the currently used technologies, energy consumption used in various energy sectors and its resultant emissions. We estimate present-day emissions of aerosols (BC, OC and PM2.5), trace gases (SO2, CO, NOX and VOC) and greenhouse gases (CO2, N2O and CH4) from non-open burning sources (residential, industry, transport, commercial) and open-burning sources (agriculture and municipal solid waste burning) for the base year 2013. We used methodologies published in literatures, and both primary and secondary data to estimate energy production and consumption in each sector and its sub-sector and associated emissions. Local practices and activity rates are explicitly accounted for energy consumption and dispersed often under-documented emission sources like brick manufacturing, diesel generator sets, mining, stone crushing, solid waste burning and diesel use in farms are considered. Apart from pyrogenic source of CH4 emissions, methanogenic and enteric fermentation sources are also accounted. Region-specific and newly measured country-specific emission factors are used for emission estimates. Activity based proxies are used for spatial and temporal distribution of emissions. Preliminary results suggest that 80% of national energy consumption is in residential sector followed by industry (8%) and transport (7%). More than 90% of the residential energy is supplied by biofuel which needs immediate attention to reduce emissions. Further, the emissions would be compared with other contemporary studies, regional and global datasets and used in the model simulations to

Decision support for redesigning wastewater treatment technologies.

Science.gov (United States)

McConville, Jennifer R; Künzle, Rahel; Messmer, Ulrike; Udert, Kai M; Larsen, Tove A

2014-10-21

This paper offers a methodology for structuring the design space for innovative process engineering technology development. The methodology is exemplified in the evaluation of a wide variety of treatment technologies for source-separated domestic wastewater within the scope of the Reinvent the Toilet Challenge. It offers a methodology for narrowing down the decision-making field based on a strict interpretation of treatment objectives for undiluted urine and dry feces and macroenvironmental factors (STEEPLED analysis) which influence decision criteria. Such an evaluation identifies promising paths for technology development such as focusing on space-saving processes or the need for more innovation in low-cost, energy-efficient urine treatment methods. Critical macroenvironmental factors, such as housing density, transportation infrastructure, and climate conditions were found to affect technology decisions regarding reactor volume, weight of outputs, energy consumption, atmospheric emissions, investment cost, and net revenue. The analysis also identified a number of qualitative factors that should be carefully weighed when pursuing technology development; such as availability of O&M resources, health and safety goals, and other ethical issues. Use of this methodology allows for coevolution of innovative technology within context constraints; however, for full-scale technology choices in the field, only very mature technologies can be evaluated.

Perfluoroalkyl substances and fish consumption.

Science.gov (United States)

Christensen, Krista Y; Raymond, Michelle; Blackowicz, Michael; Liu, Yangyang; Thompson, Brooke A; Anderson, Henry A; Turyk, Mary

2017-04-01

Perfluoroalkyl substances (PFAS) are an emerging class of contaminants. Certain PFAS are regulated or voluntarily limited due to concern about environmental persistence and adverse health effects, including thyroid disease and dyslipidemia. The major source of PFAS exposure in the general population is thought to be consumption of seafood. In this analysis we examine PFAS levels and their determinants, as well as associations between PFAS levels and self-reported fish and shellfish consumption, using a representative sample of the U.S. Data on PFAS levels and self-reported fish consumption over the past 30 days were collected from the 2007-2008, 2009-2010, 2011-2012, and 2013-2014 cycles of the National Health and Nutrition Examination Survey. Twelve different PFAS were measured in serum samples from participants. Ordinary least squares regression models were used to identify factors (demographic characteristics and fish consumption habits) associated with serum PFAS concentrations. Additional models were further adjusted for other potential exposures including military service and consumption of ready-to-eat and fast foods. Seven PFAS were detected in at least 30% of participants and were examined in subsequent analyses (PFDA, PFOA, PFOS, PFHxS, MPAH, PFNA, PFUA). The PFAS with the highest concentrations were PFOS, followed by PFOA, PFHxS and PFNA (medians of 8.3, 2.7, 1.5 and 1.0ng/mL). Fish consumption was generally low, with a median of 1.2 fish meals and 0.14 shellfish meals, reported over the past 30 days. After adjusting for demographic characteristics, total fish consumption was associated with reduced MPAH, and with elevated PFDE, PFNA and PFuDA. Shellfish consumption was associated with elevations of all PFAS examined except MPAH. Certain specific fish and shellfish types were also associated with specific PFAS. Adjustment for additional exposure variables resulted in little to no change in effect estimates for seafood variables. PFAS are emerging

Examining air pollution in China using production- and consumption-based emissions accounting approaches.

Science.gov (United States)

Huo, Hong; Zhang, Qiang; Guan, Dabo; Su, Xin; Zhao, Hongyan; He, Kebin

2014-12-16

Two important reasons for China's air pollution are the high emission factors (emission per unit of product) of pollution sources and the high emission intensity (emissions per unit of GDP) of the industrial structure. Therefore, a wide variety of policy measures, including both emission abatement technologies and economic adjustment, must be implemented. To support such measures, this study used the production- and consumption-based emissions accounting approaches to simulate the SO2, NOx, PM2.5, and VOC emissions flows among producers and consumers. This study analyzed the emissions and GDP performance of 36 production sectors. The results showed that the equipment, machinery, and devices manufacturing and construction sectors contributed more than 50% of air pollutant emissions, and most of their products were used for capital formation and export. The service sector had the lowest emission intensities, and its output was mainly consumed by households and the government. In China, the emission intensities of production activities triggered by capital formation and export were approximately twice that of the service sector triggered by final consumption expenditure. This study suggests that China should control air pollution using the following strategies: applying end-of-pipe abatement technologies and using cleaner fuels to further decrease the emission factors associated with rural cooking, electricity generation, and the transportation sector; continuing to limit highly emission-intensive but low value-added exports; developing a plan to reduce construction activities; and increasing the proportion of service GDP in the national economy.

Energy sources consumption: end uses, efficiency and productivity; La consommation des sources d'energie: utilisations finales, efficacite et productivite

Energy Technology Data Exchange (ETDEWEB)

Martin, J.M. [Institut d' Economie et de Politique de l' Energie (CNRS- UPMF), 38 - Grenoble (France)

2005-07-01

This document analyzes the impact of the choices made by all actors, from the energy producers to the process and infrastructure designers and the end users, in the evolution of energy consumptions. Some very little improvements made in the energy efficiency of appliances can become equivalent to the production of several oil fields or power plants at the world scale. More efficient energy uses will not replace the additional productions but they must be considered together to be compared. The energy files are first analyzed as a whole in order to show the hidden field of energy choices. In this framework, users, designers and fitters have to face very different choices because they consider efficiency improvements under different aspects: scientifical, technical, economical and social (public information and habits). These differences in efficiency uses have a time and spatial impact on the growth of energy consumption. The economical and social factors influence the collective way to consume energy and are expressed by the energy intensity of the economic activity. The last part of this document analyzes the influence of this notion on the world energy consumption scenarios at the 2050 prospects. (J.S.)

High-power free-electron lasers-technology and future applications

Science.gov (United States)

Socol, Yehoshua

2013-03-01

Free-electron laser (FEL) is an all-electric, high-power, high beam-quality source of coherent radiation, tunable - unlike other laser sources - at any wavelength within wide spectral region from hard X-rays to far-IR and beyond. After the initial push in the framework of the “Star Wars” program, the FEL technology benefited from decades of R&D and scientific applications. Currently, there are clear signs that the FEL technology reached maturity, enabling real-world applications. E.g., successful and unexpectedly smooth commissioning of the world-first X-ray FEL in 2010 increased in one blow by more than an order of magnitude (40×) wavelength region available by FEL technology and thus demonstrated that the theoretical predictions just keep true in real machines. Experience of ordering turn-key electron beamlines from commercial companies is a further demonstration of the FEL technology maturity. Moreover, successful commissioning of the world-first multi-turn energy-recovery linac demonstrated feasibility of reducing FEL size, cost and power consumption by probably an order of magnitude in respect to previous configurations, opening way to applications, previously considered as non-feasible. This review takes engineer-oriented approach to discuss the FEL technology issues, keeping in mind applications in the fields of military and aerospace, next generation semiconductor lithography, photo-chemistry and isotope separation.

Fuelwood consumption in Newfoundland

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

This study was undertaken to get a first estimate of fuelwood consumption for the island of Newfoundland for the period April 1, 1977 to March 31, 1978. Available literature was reviewed and an assessment made on the existing data collection systems on fuelwood consumption used by the various forestry agencies in the province. A personal interview telephone survey on fuelwood use was conducted for most parts of the Island that had access to wood supplies. Householders were asked how much wood they burned, when they started burning wood, type of wood burning unit used, other sources of heat used, reasons for burning wood, employment, distance travelled to obtain wood, and expected consumption in 1978-79 compared to 1977-78. It was found that the estimated number of households burning wood increased to ca 32,000 in 1977-78. There was a further estimated increase to about 39,500 in 1978-79. In 1977-78, it was estimated that 461,571 stacked cubic metres of fuelwood were consumed on the Island. This was broken down into 318,916 m/sup 3/ of softwood and 142,655 m/sup 3/ of hardwood. Although the statistical methodology used may have led to an overestimate of the volume of wood consumed, the criteria used in the selection of households had the opposite effect in that the volume consumed by a large number of casual wood burners (less than 3 stacked m/sup 3/) was omitted from the estimate. Fuelwood consumption accounted for anywhere from 1% to 77% of the calculated allowable annual cut for the various forest management units on the Island for 1977-78. Overall, fuelwood consumption estimated by the survey accounted for 8% of the estimated allowable annual cut. Use of wood as a fuel is expected to continue increasing and it is recommended that estimates of consumption be periodically updated so that forest management plans can make adequate provision for this demand in future. 5 refs., 16 figs., 7 tabs.

Evolution of energy consumption in Japan after Fukushima. 2010-2012

International Nuclear Information System (INIS)

Laponche, Bernard

2013-01-01

This note presents and comments the evolution of the energy system in Japan between 2010 and 2012 in order to analyse the consequences of the sudden decrease of nuclear electricity production due to the Fukushima accident. In fact, the evolution since 1990 is studied. The evolution of general economic figures (population, GDP, GDP per inhabitant) is firstly overviewed, and then the evolution of final energy consumption (as a whole and per inhabitant, and per sector), the evolution of final electricity consumption (as a whole, per sector), the evolution of electricity production (as a whole, per sector, per source of energy), the evolution of primary energy consumption (as a whole, per inhabitant, per source of energy). The development of renewable energies is briefly discussed. Then several indicators and impacts are highlighted and discussed: primary and final energy intensity, emissions of carbon dioxide (as a whole, by the energy sector), and costs and prices of imported energies

Alcohol consumption and tolerance of Neurospora crassa

Science.gov (United States)

The alcohol consumption and tolerance of the ascomycete Neurospora crassa was investigated in this study. This fungus is able to utilize both native alcohol and non-native alcohols as carbon sources, yet little is known about the enzymes involved in these processes. The deletion of alcohol dehydroge...

U. K. surface passenger transport sector. Energy consumption and policy options for conservation

Energy Technology Data Exchange (ETDEWEB)

Maltby, D; Monteath, I G; Lawler, K A

1978-12-01

Forecasts of U.K. energy consumption in this sector for four future scenarios based on different economic growth rates, energy prices, and energy conservation policies, show that by the year 2000, private transport will probably account for 76-94% of total energy consumption in surface passenger transport. A 33% increase in the average miles-per-gallon fuel consumption through technological improvements in private vehicles, conversion of private vehicles to diesel oil, additional fuel taxation equivalent to 25 or 50% fuel price increase, a 10% reduction in average car engine size (encouraged by taxation), and changes in public transport technology offer energy savings of about 20, 5-10, 6.3 or 12.5, 2-4, and 2%, respectively. There is considerable uncertainty about the outcome of these options.

NEDO Forum 2001. Session on advanced power generation and storage technology development; NEDO Forum 2001. Shindenryoku gijutsu kaihatsu session

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-09-20

The presentations made at the above-named session and remarks made at the panel discussion of the NEDO (New Energy and Industrial Technology Development Organization) forum held in Tokyo on September 20, 2001, are collected in this report. Predicted by Deputy Chairman Tanaka of International Superconductivity Technology Center in his lecture entitled 'Energy problem in IT (information technology) oriented society' were that possibilities were high that power consumption would rapidly increase in line with the progress of broad band and wireless, that energy conservation and environmental technologies should be developed urgently, and that superconductivity technology would assume an important role. Discussed at the panel on 'Prospect of distributed power sources in power systems' were 'Power utilization by information communication in IT-oriented days and needs for development,' 'Energy utilization involving buildings and needs for development,' 'Tasks to discharge in cogeneration technology development and coordination with power systems,' 'Technical problems involving interconnection of distributed power sources and needs for development,' 'Present state of distributed power sources and needs for development,' and 'From Fuel and Storage Technology Development Department to Advanced Power Generation and Storage Technology Development Department.' (NEDO)

Ground Source Geothermal District Heating and Cooling System

Energy Technology Data Exchange (ETDEWEB)

Lowe, James William [Ball State Univ., Muncie, IN (United States)

2016-10-21

Ball State University converted its campus from a coal-fired steam boiler district heating system to a ground source heat pump geothermal district system that produces simultaneously hot water for heating and chilled water for cooling. This system will include the installation of 3,600 four hundred feet deep vertical closed loop boreholes making it the largest ground source geothermal district system in the country. The boreholes will act as heat exchangers and transfer heat by virtue of the earth’s ability to maintain an average temperature of 55 degree Fahrenheit. With growing international concern for global warming and the need to reduce worldwide carbon dioxide loading of the atmosphere geothermal is poised to provide the means to help reduce carbon dioxide emissions. The shift from burning coal to utilizing ground source geothermal will increase electrical consumption but an overall decrease in energy use and reduction in carbon dioxide output will be achieved. This achievement is a result of coupling the ground source geothermal boreholes with large heat pump chiller technology. The system provides the thermodynamic means to move large amounts of energy with limited energy input. Ball State University: http://cms.bsu.edu/About/Geothermal.aspx

Re-investigating the electricity consumption and economic growth nexus in Portugal

International Nuclear Information System (INIS)

Tang, Chor Foon; Shahbaz, Muhammad; Arouri, Mohamed

2013-01-01

In the previous decades, a number of studies have been conducted to analyse the causal relationship between electricity consumption and economic growth in the Portuguese economy. However, the evidence remains controversial because the previous studies do not provide clear causality evidence. This might be attributed to the omitted variables bias because most previous studies only focus on the relationship between electricity consumption and economic growth in a bi-variate model. This paper attempts to re-investigate the relationship between electricity consumption and economic growth in Portugal using a multivariate model. Based on the bounds testing approach to cointegration and the Granger causality test within the vector error-correction model (VECM), our empirical results confirm the presence of cointegration among the variables. Moreover, there is evidence of bi-directional causality between electricity consumption and economic growth in the short- and long-run. This suggests that energy is an important source of economic growth in Portugal. Therefore, energy conservation policies should not be implemented because it would deteriorate the process of economic growth and development of the Portuguese economy. - Highlights: • Electricity consumption and economic growth series in Portugal are cointegrated. • There is evidence of feedback effects between the two variables. • Energy is an important source of economic growth in Portugal

FY 2000 report on the results of the development of the stand-by consumption power reduction technology. R and D of the stand-by consumption power reduction technology in relation to machine tools; 2000 nendo taikiji shohi denryoku sakugen gijutsu kaihatsu seika hokokusho. Kosaku kiki ni kanrensuru taikiji shohi denryoku sakugen gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In relation to machine tools, a method was studied for reducing consumption power at the time of standing-by, keeping the present processing accuracy, processing efficiency and operability, and the results of the study were as follows. As to the chip conveyer, the stand-by consumption power was reduced by approximately 75% by reducing the motor capacity by reviewing the effective operation method and the structure. Concerning the mist collector, a reduction of approximately 85% was confirmed by adopting the efficient operation method and high-efficient motor. Relating to the oil controller, an experiment was made on the frame thermal circulation system and the self-forced air cooling system. In terms of the rise in temperature, the controller is lower than the existing one, but it was found out that the consumption power could be reduced by about 14% and about 98%, respectively. About the coolant pump, the optimum inclination angle/necessary minimum flow rate of oil pan were confirmed, and a reduction of 47% was confirmed. As to the hydraulic pump, study was made of a method to substitute other power source for oil pressure and the intermittent operation of hydraulic unit, and effects of each were confirmed. Further studies were made of the control disc, reduction in air consumption, etc. (NEDO)

Residential/commercial market for energy technologies

Energy Technology Data Exchange (ETDEWEB)

Glesk, M M

1979-08-01

The residential/commercial market sector, particularly as it relates to energy technologies, is described. Buildings account for about 25% of the total energy consumed in the US. Market response to energy technologies is influenced by several considerations. Some considerations discussed are: industry characteristics; market sectors; energy-consumption characeristics; industry forecasts; and market influences. Market acceptance may be slow or nonexistent, the technology may have little impact on energy consumption, and redesign or modification may be necessary to overcome belatedly perceived market barriers. 7 figures, 20 tables.

Technology, safety, and costs of decommissioning a reference large irradiator and reference sealed sources

Energy Technology Data Exchange (ETDEWEB)

Haffner, D.R.; Villelgas, A.J. [Pacific Northwest Lab., Richland, WA (United States)

1996-01-01

This report contains the results of a study sponsored by the US Nuclear Regulatory Commission (NRC) to examine the decommissioning of large radioactive irradiators and their respective facilities, and a broad spectrum of sealed radioactive sources and their respective devices. Conceptual decommissioning activities are identified, and the technology, safety, and costs (in early 1993 dollars) associated with decommissioning the reference large irradiator and sealed source facilities are evaluated. The study provides bases and background data for possible future NRC rulemaking regarding decommissioning, for evaluation of the reasonableness of planned decommissioning actions, and for determining if adequate funds are reserved by the licensees for decommissioning of their large irradiator or sealed source facilities. Another purpose of this study is to provide background and information to assist licensees in planning and carrying out the decommissioning of their sealed radioactive sources and respective facilities.

Technology, safety, and costs of decommissioning a reference large irradiator and reference sealed sources

International Nuclear Information System (INIS)

Haffner, D.R.; Villelgas, A.J.

1996-01-01

This report contains the results of a study sponsored by the US Nuclear Regulatory Commission (NRC) to examine the decommissioning of large radioactive irradiators and their respective facilities, and a broad spectrum of sealed radioactive sources and their respective devices. Conceptual decommissioning activities are identified, and the technology, safety, and costs (in early 1993 dollars) associated with decommissioning the reference large irradiator and sealed source facilities are evaluated. The study provides bases and background data for possible future NRC rulemaking regarding decommissioning, for evaluation of the reasonableness of planned decommissioning actions, and for determining if adequate funds are reserved by the licensees for decommissioning of their large irradiator or sealed source facilities. Another purpose of this study is to provide background and information to assist licensees in planning and carrying out the decommissioning of their sealed radioactive sources and respective facilities

Deconstructing Demand: The Anthropogenic and Climatic Drivers of Urban Water Consumption.

Science.gov (United States)

Hemati, Azadeh; Rippy, Megan A; Grant, Stanley B; Davis, Kristen; Feldman, David

2016-12-06

Cities in drought prone regions of the world such as South East Australia are faced with escalating water scarcity and security challenges. Here we use 72 years of urban water consumption data from Melbourne, Australia, a city that recently overcame a 12 year "Millennium Drought", to evaluate (1) the relative importance of climatic and anthropogenic drivers of urban water demand (using wavelet-based approaches) and (2) the relative contribution of various water saving strategies to demand reduction during the Millennium Drought. Our analysis points to conservation as a dominant driver of urban water savings (69%), followed by nonrevenue water reduction (e.g., reduced meter error and leaks in the potable distribution system; 29%), and potable substitution with alternative sources like rain or recycled water (3%). Per-capita consumption exhibited both climatic and anthropogenic signatures, with rainfall and temperature explaining approximately 55% of the variance. Anthropogenic controls were also strong (up to 45% variance explained). These controls were nonstationary and frequency-specific, with conservation measures like outdoor water restrictions impacting seasonal water use and technological innovation/changing social norms impacting lower frequency (baseline) use. The above-noted nonstationarity implies that wavelets, which do not assume stationarity, show promise for use in future predictive models of demand.

Global risks from energy consumption

International Nuclear Information System (INIS)

von Hippel, F.

1983-01-01

A discussion of some of the global risks associated with current and frequently proposed future levels of consumption of energy from oil, coal, fission, fusion, and renewable sources points out the the dangers are serious and relatively near term. These include world war over Persian Gulf oil, climate change due to the buildup of atmospheric carbon dioxide, the accelerated proliferation of nuclear weapons, and competition between food and energy for land and water. The author urges placing a greater emphasis on how we use energy and how to reduce energy waste. At the levels of consumption which economically justified levels of energy efficiency could bring about, enough flexibility could develop in our choice of a future energy-supply mix to dramatically reduce the associated global risks. 47 references, 3 figures

Innovation, Diffusion, and Regulation in Energy Technologies

Science.gov (United States)

Fetter, Theodore Robert

diffusion facilitated by environmental regulation. In my third paper, I address a broader scale of technology change, looking for evidence that improved technologies for energy generation and consumption have allowed less energy-intensive or pollution-intensive growth in developing countries. I analyze panel data on Gross Domestic Product (GDP) and national energy consumption to look for evidence of technology "leapfrogging" (i.e., decreased intensity of energy consumption for a given level of economic growth). I combine 1960-2014 data on energy consumption from the International Energy Agency with historical data that extends back to 1861 for several countries on energy consumption and fuel source, as well as GDP. I compare countries at the same income level and test whether energy consumption and energy intensity are different for today's less-developed countries compared to today's industrialized countries when they had similar income levels. Compared to prior analysis, my much longer time series allows me to test for leapfrogging over a scale appropriate to the pace of widespread technological change.

The aluminum smelting process and innovative alternative technologies.

Science.gov (United States)

Kvande, Halvor; Drabløs, Per Arne

2014-05-01

The industrial aluminum production process is addressed. The purpose is to give a short but comprehensive description of the electrolysis cell technology, the raw materials used, and the health and safety relevance of the process. This article is based on a study of the extensive chemical and medical literature on primary aluminum production. At present, there are two main technological challenges for the process--to reduce energy consumption and to mitigate greenhouse gas emissions. A future step may be carbon dioxide gas capture and sequestration related to the electric power generation from fossil sources. Workers' health and safety have now become an integrated part of the aluminum business. Work-related injuries and illnesses are preventable, and the ultimate goal to eliminate accidents with lost-time injuries may hopefully be approached in the future.

Advanced Technology Subsonic Transport Study: N+3 Technologies and Design Concepts

Science.gov (United States)

Raymer, Daniel P.; Wilson, Jack; Perkins, H. Douglas; Rizzi, Arthur; Zhang, Mengmeng; RamirezPuentes, Alfredo

2011-01-01

Conceptual Research Corporation, the Science of the Possible, has completed a two-year study of concepts and technologies for future airliners in the 180-passenger class. This NASA-funded contract was primarily focused on the ambitious goal of a 70 percent reduction in fuel consumption versus the market-dominating Boeing 737-800. The study is related to the N+3 contracts awarded in 2008 by NASA s Aeronautics Research Mission Directorate to teams led by Boeing, GE Aviation, MIT, and Northrop Grumman, but with more modest goals and funding. CRC s contract featured a predominant emphasis on propulsion and fuel consumption, but since fuel consumption depends upon air vehicle design as much as on propulsion technology, the study included notional vehicle design, analysis, and parametric studies. Other NASA goals including NOx and noise reduction are of long-standing interest but were not highlighted in this study, other than their inclusion in the propulsion system provided to CRC by NASA. The B-737-800 was used as a benchmark, parametric tool, and design point of departure. It was modeled in the RDS-Professional aircraft design software then subjected to extensive parametric variations of parasitic drag, drag-due-to-lift, specific fuel consumption, and unsized empty weight. These studies indicated that the goal of a 70 percent reduction in fuel consumption could be attained with roughly a 30 percent improvement in all four parameters. The results were then fit to a Response Surface and coded for ease of use in subsequent trade studies. Potential technologies to obtain such savings were identified and discussed. More than 16 advanced concept designs were then prepared, attempting to investigate almost every possible emerging concept for application to this class airliner. A preliminary assessment of these concepts was done based on their total wetted area after design normalization of trimmed maximum lift. This assessment points towards a Tailless Airliner concept which

On the determinants of renewable energy consumption: International Evidence

OpenAIRE

Anis Omri; Duc Khuong Nguyen

2014-01-01

Over recent years, renewable energy sources have emerged as an important component of world energy consumption. Little is however known about the determinants of renewable energy consumption. This article tackles this issue for a global panel consisting of 64 countries over the period 1990-2011 by using a dynamic system- GMM panel model. We also consider three homogeneous subpanels which are constructed based on the income level of sample countries (high-, middle-, and low-income subpanels). ...

MEGASTAR: The meaning of growth. An assessment of systems, technologies, and requirements. [methodology for display and analysis of energy production and consumption

Science.gov (United States)

1974-01-01

A methodology for the display and analysis of postulated energy futures for the United States is presented. A systems approach methodology including the methodology of technology assessment is used to examine three energy scenarios--the Westinghouse Nuclear Electric Economy, the Ford Technical Fix Base Case and a MEGASTAR generated Alternate to the Ford Technical Fix Base Case. The three scenarios represent different paths of energy consumption from the present to the year 2000. Associated with these paths are various mixes of fuels, conversion, distribution, conservation and end-use technologies. MEGASTAR presents the estimated times and unit requirements to supply the fuels, conversion and distribution systems for the postulated end uses for the three scenarios and then estimates the aggregate manpower, materials, and capital requirements needed to develop the energy system described by the particular scenario.

Spent sealed radioactive sources conditioning technology for the disposal at the national repository Baita-Bihor

International Nuclear Information System (INIS)

Bujoreanu, D.; Popescu, I.V.

2006-01-01

A spent sealed radioactive source(SRS) is a high integrity capsule which contains a small amount of concentrated radionuclide with an activity which ranges from a few MBq up to levels of hundreds TBq. Presently, there are now many spent and unusable SRS in Romania, which have been used a long time in various industrial applications (smoke detectors, weld testing etc.). Considering the activity of the Radioactive Waste Treatment Plant (STDR) at the Institute for Nuclear Research Pitesti regarding radioactive source collecting from various economic agents, several radioactive sources are held in the intermediate storage deposit facility on the institute platform awaiting conditioning for the final disposal. This paper presents the conditioning technology for this sources, which has as ultimate purpose to completion of a product which matches the waste acceptance requirements imposed by the National Authority Control of Nuclear Activities, CNCAN, for the disposal site DNDR Baita - Bihor. The technology used for obtaining the final product allows two options for the immobilization of the sources in the 218 L steel drum and these are: Sources placed in the original packages and which can not be dismantled will be isolated by encapsulation in 10 litters metal capsules and then conditioned in 218 l steel drum, with a concrete biological shielding; Sources removed from the initial package are isolated in stainless steel capsules, which are to be conditioned in the same 218 L steel drum. The final product obtained as a result of the concrete conditioning operations of the spent SRS in 218 L steel drum is the steel drum - concrete - low radioactive waste assembly which presents itself as a concrete block which includes one or more capsules containing SRS. (author)

Radiation source states on-line supervision system design and implementation based on RFID technology

International Nuclear Information System (INIS)

Yang Binhua; Ling Qiu; Yin Guoli; Yang Kun; Wan Xueping; Wang Kan

2011-01-01

It puts forward radiation source states on-line monitoring resolution based on RFID technology. Firstly, the system uses RFID in real-time transmission of the radiation dose rate, and monitors the radiation source states and dose rate of the surrounding environment on-line. Then it adopts regional wireless networking mode to construct enterprise level monitoring network, which resolves long-distance wiring problems. And then it uses GPRS wireless to transport the real-time data to the monitoring center and the government supervision department, By adopting randomly dynamic cording in display update every day, it strengthens the supervision of the radiation source. At last this system has been successful applied to a thickness gauge project, which verifies the feasibility and practicality is good. (authors)

Top food sources contributing to vitamin D intake and the association of ready-to-eat cereal and breakfast consumption habits to vitamin D intake in Canadians and United States Americans.

Science.gov (United States)

Hill, Kathleen M; Jonnalagadda, Satya S; Albertson, Ann M; Joshi, Nandan A; Weaver, Connie M

2012-08-01

This study aimed to determine dietary vitamin D intake of U.S. Americans and Canadians and contributions of food sources to total vitamin D intake. Total of 7- or 14-d food intake data were analyzed for vitamin D by a proprietary nutrient assessment methodology that utilized food intake data from the Natl. Eating Trends(®) service, portion size data from NHANES 1999-2004, and nutrient values using the Univ. of Minnesota's Nutrition Data System for Research software. Study participants were 7837 U.S. Americans and 4025 Canadians, ≥2-y-old males and females. The main outcome measures were total dietary vitamin D intake, percent contribution of foods to total vitamin D intake, and vitamin D intake by cereal and breakfast consumption habits. ANOVA was used to determine differences in means or proportions by age and gender and according to breakfast consumption habits. Mean vitamin D intake ranged from 152 to 220 IU/d. Less than 2% of participants in all age groups from the United States and Canada met the 2011 Recommended Daily Allowance (RDA) for vitamin D from foods. Milk, meat, and fish were the top food sources for vitamin D for both Americans and Canadians. Ready-to-eat (RTE) cereal was a top 10 source of vitamin D for Americans but not Canadians. Vitamin D intake was higher with more frequent RTE cereal and breakfast consumption in both countries, largely attributable to greater milk intake. Most U.S. Americans and Canadians do not meet the 2011 Inst. of Medicine recommended daily allowance (RDA) for vitamin D for their age groups from foods. Increasing breakfast and cereal consumption may be a useful strategy to increase dietary vitamin D intake to help individuals meet the RDA for vitamin D, particularly by increasing milk intake. However, it is likely that additional food fortification or vitamin D supplementation is required to achieve the RDA. © 2012 Institute of Food Technologists®

Modeling of renewable hybrid energy sources

Directory of Open Access Journals (Sweden)

Dumitru Cristian Dragos

2009-12-01

Full Text Available Recent developments and trends in the electric power consumption indicate an increasing use of renewable energy. Renewable energy technologies offer the promise of clean, abundant energy gathered from self-renewing resources such as the sun, wind, earth and plants. Virtually all regions of the world have renewable resources of one type or another. By this point of view studies on renewable energies focuses more and more attention. The present paper intends to present different mathematical models related to different types of renewable energy sources such as: solar energy and wind energy. It is also presented the validation and adaptation of such models to hybrid systems working in geographical and meteorological conditions specific to central part of Transylvania region. The conclusions based on validation of such models are also shown.

Exploring private consumers’ willingness to adopt Smart Grid technology

DEFF Research Database (Denmark)

Toft, Madeleine Broman; Thøgersen, John

2015-01-01

it involves behavioural changes. There is a need to get more insight into who are willing to adopt SGT and why. This study draws on innovation adoption theory as a framework for understanding consumer adoption of this new technology. We explore whether consumers who have already adopted other types of new......The goal of radically increasing the proportion of electricity generated from renewable sources puts the current electrical grid under pressure and one of the solutions is to turn the grid into a ‘Smart Grid’. One of the key elements of the Smart Grid is that electricity consumers make some...... of their consumption available as flexible capacity to balance the grid. Consumers’ flexible capacity is only available to the grid if the consumers adopt Smart Grid technology (SGT) that establishes the link between the electric system and the consumer. This technology is new to private consumers and using...

Development of energy consumption in households. Relations with domestic behavior; Ontwikkeling energiegebruik in de huishouding. Relaties met huishoudelijk gedrag

Energy Technology Data Exchange (ETDEWEB)

Groot-Marcus, J.P.; Scherhorn, E.

1999-07-01

The development of technology, technological innovations and demographic developments are known factors with respect to their impact on energy consumption. However, it is not yet very clear to what extent behavioral changes play a part in favor or to the detriment of energy consumption. In this report an outline is given of developments with respect to the level of provisions, services, amenities, etc. and related domestic behavior, as far as it concerns the consumption of energy of private households in the Netherlands in the second part of the 20th century. Therefore, this study is not about the impact of technological innovations, but about technological changes and changes in the materialistic environment, which resulted in an adjustment of the domestic situation and of several types of domestic behavior, and thus, also resulted in effects on energy consumption. Concrete subjects that are dealt with are the house, heating, personal care, and laundry. 60 refs.

The ICY1 gene from Saccharomyces cerevisiae affects nitrogen consumption during alcoholic fermentation

Directory of Open Access Journals (Sweden)

Claudio Martínez

2014-07-01

Conclusions: Our results suggest that the expression of ICY1 is regulated by the amount of nitrogen available in the must and it is involved in the consumption of ammonium, given the increase in the consumption of this nitrogen source observed in the null mutant strain.

Energy Consumption in Copper Smelting: A New Asian Horse in the Race

Science.gov (United States)

Coursol, P.; Mackey, P. J.; Kapusta, J. P. T.; Valencia, N. Cardona

2015-05-01

After a marked improvement in energy consumption in copper smelting during the past few decades, technology development has been slowing down in the Americas and in Europe. Innovation, however, is still required to further reduce energy consumption while complying with stringent environmental regulations. The bottom blowing smelting technology being developed in China shows success and promise. The general configuration of the bath smelting vessel, the design of high-pressure injectors, and the concentrate addition system are described and discussed in this article with respect to those used in other technologies. The bottom blowing technology is shown to be operating at a temperature in the range of 1160-1180°C, which is the lowest reported temperature range for a modern copper smelting process. In this article, it is suggested that top feeding of filter cake concentrate, which is also used in other technologies, has a positive effect in reducing the oxidation potential of the slag ( p(O2)) while increasing the FeS solubility in slag. This reduction in p(O2) lowers the magnetite liquidus of the slag, while the increased solubility of FeS in slag helps toward reaching very low copper levels in flotation slag tailings. The application of high-pressure injectors allows for the use of high levels of oxygen enrichment with no requirements for punching. Using a standard modeling approach from the authors' previous studies, this article discusses these aspects and compares the energy consumption of the bottom blowing technology with that of other leading flash and bath smelting technologies, namely: flash smelting, Noranda/Teniente Converter, TSL (Isasmelt [Glencore Technology Pty. Ltd., Brisbane, Queensland, Australia]/Outotec), and the Mitsubishi Process (Mitsubishi Materials Corporation, Tokyo, Japan).

Commercial and institutional consumption of energy survey : summary report 2005

Energy Technology Data Exchange (ETDEWEB)

Fecteau, V.; Hulan, I.; McNabb, D. [Natural Resources Canada, Ottawa, ON (Canada). Office of Energy Efficiency

2007-06-15

A survey was conducted on the energy consumption of Canada's commercial and institutional sectors. The primary purpose was to improve the understanding of various aspects of energy consumption in these sector and to enable Natural Resources Canada to develop programs to support institutions that seek to achieve greater energy efficiency and reduce their greenhouse gas emissions. Energy intensity data was presented by energy source and region amongst the following commercial and institutional sectors: retail trade including food and non-food; education including colleges and universities; health care including non-hospital health care and hospitals; and, accommodation and food services. Data obtained on each establishment's energy consumption and floor area were used to calculate their energy intensity ratio. In 2005, the commercial and institutional establishments consumed 1.04 billion gigajoules, nearly double the annual consumption of all private households in Ontario. The total energy intensity was 1.54 GJ per square metre. The lowest energy rating was found in social assistance establishments, while the highest energy rating was in food services and drinking places, followed by hospitals. Quebec and the Atlantic provinces had the lowest energy intensity levels, while the Prairie provinces had the highest energy intensity rate. The survey included data on the age of establishments; the energy sources used for space heating cooling and water heating; establishment spending on energy consumption; and, the use of auxiliary equipment. refs., tabs., figs.

Development and demonstration of energy saving technologies in agriculture; Udvikling og demonstration af energibesparende teknologi til landbruget

Energy Technology Data Exchange (ETDEWEB)

Pedersen, Joergen; Trenel, P.; Krogh Hansen, T.; Andersen, Mathias

2010-07-01

The energy consumption for agriculture is approx. 10% of the total corporate energy use in Denmark and is therefore a major source of total CO2 emission. This project aims to show that there is great potential for reducing energy use in agriculture. The project focused on saving energy in pig production, as this is the largest branch of production in farming and also the most energy consuming. The energy consumption in selected herds has been monitored with high accuracy making it possible to track down energy consumption, on system level, minute by minute. The energy consumption for light, ventilation and heating systems has been followed in various sections of different farms to compare the level of consumption. In the project 4 technologies were developed and tested. The results are: 1) Two new EC (electronically commuted) fans for livestock facilities makes it possible to reduce power consumption for ventilation with over 50% compared with frequency controlled fans; 2) An intelligent shelter for two climate stables was developed to regulate heat in the piglet pens. The system showed a 43% energy saving for heating compared to identical climate stables with normal floor heating; 3) An hour-based energy management system called Elspot was tested. The Elspot module can automatically activate and deactivate electrically powered equipment according to the energy price. The study found that farms can reduce their spending on electricity by 25% using the Elspot module on a feed mill; 4) A web interface for energy monitoring was designed specifically for farmers. This system makes it possible for farmers to monitor their energy consumption at and benchmark this against normative values or new technologies. The initial goal of the project was to develop and demonstrate solutions that could potentially reduce energy consumption in agriculture by 20%. Since the work was done only with energy saving technologies in livestock production, this corresponds to an energy

An Iterative Load Disaggregation Approach Based on Appliance Consumption Pattern

Directory of Open Access Journals (Sweden)

Huijuan Wang

2018-04-01

Full Text Available Non-intrusive load monitoring (NILM, monitoring single-appliance consumption level by decomposing the aggregated energy consumption, is a novel and economic technology that is beneficial to energy utilities and energy demand management strategies development. Hardware costs of high-frequency sampling and algorithm’s computational complexity hampered NILM large-scale application. However, low sampling data shows poor performance in event detection when multiple appliances are simultaneously turned on. In this paper, we contribute an iterative disaggregation approach that is based on appliance consumption pattern (ILDACP. Our approach combined Fuzzy C-means clustering algorithm, which provide an initial appliance operating status, and sub-sequence searching Dynamic Time Warping, which retrieves single energy consumption based on the typical power consumption pattern. Results show that the proposed approach is effective to accurately disaggregate power consumption, and is suitable for the situation where different appliances are simultaneously operated. Also, the approach has lower computational complexity than Hidden Markov Model method and it is easy to implement in the household without installing special equipment.

Electric energy savings from new technologies

Energy Technology Data Exchange (ETDEWEB)

Moe, R.J.; Harrer, B.J.; Kellogg, M.A.; Lyke, A.J.; Imhoff, K.L.; Fisher, Z.J.

1986-01-01

Purpose of the report is to provide information about the electricity-saving potential of new technologies to OCEP that it can use in developing alternative long-term projections of US electricity consumption. Low-, base-, and high-case scenarios of the electricity savings for ten technologies were prepared. The total projected annual savings for the year 2000 for all ten technologies were 137 billion kilowatt hours (BkWh), 279 BkWh, and 470 BkWh, respectively, for the three cases. The magnitude of these savings projections can be gauged by comparing them to the Department's reference case projection for the 1985 National Energy Policy Plan. In the Department's reference case, total consumption in 2000 is projected to be 3319 BkWh. Thus, the savings projected here represent between 4% and 14% of total consumption projected for 2000. Because approximately 75% of the base-case estimate of savings are already incorporated into the reference forecast, reducing projected electricity consumption from what it otherwise would have been, the savings estimated here should not be directly subtracted from the reference forecast.

Knowledge network model of the energy consumption in discrete manufacturing system

Science.gov (United States)

Xu, Binzi; Wang, Yan; Ji, Zhicheng

2017-07-01

Discrete manufacturing system generates a large amount of data and information because of the development of information technology. Hence, a management mechanism is urgently required. In order to incorporate knowledge generated from manufacturing data and production experience, a knowledge network model of the energy consumption in the discrete manufacturing system was put forward based on knowledge network theory and multi-granularity modular ontology technology. This model could provide a standard representation for concepts, terms and their relationships, which could be understood by both human and computer. Besides, the formal description of energy consumption knowledge elements (ECKEs) in the knowledge network was also given. Finally, an application example was used to verify the feasibility of the proposed method.

An investigation on energy consumption trend in Japan. Transportation sector

International Nuclear Information System (INIS)

Suzuki, Takayoshi

2005-08-01

Although energy consumption in the industry sector has almost been stable, energy consumption in the transportation (passenger and freight) sector has increased much after the oil crisis. The increase of energy consumption in the passenger sector can be attributed to the increase in transportation by private passenger vehicles; while the increase in the freight sector was due to the modal shift to trucks. Among transportation methods, automobiles, i.e. passenger vehicles and trucks, are now dominant in terms of energy consumption and also in terms of amount of transportation. Therefore implementing energy conservation measures relating to automobiles is very important in order to suppress the energy consumption in the transportation sector. This report summarizes the results of investigation on energy conservation measures, especially relevant to automobiles. It was found from the investigation that most promising and effective technologies or measures are promoting market penetration of vehicles satisfying ''top runner standard'', development and employment of hybrid vehicles, and introduction of vehicles with ''idling-stop'' systems. (author)

Technology utilization and energy efficiency: Lessons learned and future prospects

International Nuclear Information System (INIS)

Rosenberg, N.

1992-01-01

The concept of energy efficiency within the context of economic and environmental policy making is quite complex. Relatively poor economic performance ratings can weaken the validity of some energy supply systems which tend to reduce energy inputs for specific volumes of output, but don't minimize total cost per unit product; and industry is often slow to adopt new technologies, even those proven to reduce total costs. In this paper, the problems connected with growth in energy requirements in relation to product are first examined within the context of world economic performance history. Three key elements are shown to explain the differences in energy intensity and consumption typology among various countries, i.e., availability of energy sources, prices and government policies. Reference is made to the the role of recent energy prices and policies in the United States whose industrialization has been directly connected with the vast availability of some energy sources. In delineating possible future energy scenarios, the paper cites the strong influence of long term capital investment on the timing of the introduction of energy efficient technologies into industrial process schemes. It illustrates the necessity for flexibility in new energy strategies which are to take advantage the opportunities offered by a wide range of alternative energy sources now being made available through technological innovation

Microbial CH4 and N2O consumption in acidic wetlands

Directory of Open Access Journals (Sweden)

Steffen eKolb

2012-03-01

Full Text Available Acidic wetlands are global sources of the atmospheric greenhouse gases methane (CH4, and nitrous oxide (N2O. Consumption of both atmospheric gases has been observed in various acidic wetlands, but information on the microbial mechanisms underlying these phenomena is scarce. A substantial amount of CH4 is consumed in sub soil by aerobic methanotrophs at anoxic–oxic interfaces (e.g., tissues of Sphagnum mosses, rhizosphere of vascular plant roots. Methylocystis-related species are likely candidates that are involved in the consumption of atmospheric CH4 in acidic wetlands. Oxygen availability regulates the activity of methanotrophs of acidic wetlands. Other parameters impacting on the methanotroph-mediated CH4 consumption have not been systematically evaluated. N2O is produced and consumed by microbial denitrification, thus rendering acidic wetlands as temporary sources or sinks for N2O. Denitrifier communities in such ecosystems are diverse, and largely uncultured and/or new, and environmental factors that control their consumption activity are unresolved. Analyses of the composition of N2O reductase genes in acidic wetlands suggest that acid-tolerant Proteobacteria have the potential to mediate N2O consumption in such soils. Thus, the fragmented current state of knowledge raises open questions concerning methanotrophs and dentrifiers that consume atmospheric CH4 and N2O in acidic wetlands.

Can UK passenger vehicles be designed to meet 2020 emissions targets? A novel methodology to forecast fuel consumption with uncertainty analysis

International Nuclear Information System (INIS)

Martin, Niall P.D.; Bishop, Justin D.K.; Choudhary, Ruchi; Boies, Adam M.

2015-01-01

Highlights: • This paper introduces a Bayesian methodology to quantify new car fuel consumption. • Model presents user with more realistic, on-road, fuel consumption estimates. • Sources of NEDC uncertainty attributed to imprecise assumptions for resistances. • Fuel consumption of average UK car projected to exceed 2020 emissions standards. - Abstract: Vehicle manufacturers are required to reduce their European sales-weighted emissions to 95 g CO_2/km by 2020, with the aim of reducing on-road fleet fuel consumption. Nevertheless, current fuel consumption models are not suited for the European market and are unable to account for uncertainties when used to forecast passenger vehicle energy-use. Therefore, a new methodology is detailed herein to quantify new car fleet fuel consumption based on vehicle design metrics. The New European Driving Cycle (NEDC) is shown to underestimate on-road fuel consumption in Spark (SI) and Compression Ignition (CI) vehicles by an average of 16% and 13%, respectively. A Bayesian fuel consumption model attributes these discrepancies to differences in rolling, frictional and aerodynamic resistances. Using projected inputs for engine size, vehicle mass, and compression ratio, the likely average 2020 on-road fuel consumption was estimated to be 7.6 L/100 km for SI and 6.4 L/100 km for CI vehicles. These compared to NEDC based estimates of 5.34 L/100 km (SI) and 4.28 L/100 km (CI), both of which exceeded mandatory 2020 fuel equivalent emissions standards by 30.2% and 18.9%, respectively. The results highlight the need for more stringent technological developments for manufacturers to ensure adherence to targets, and the requirements for more accurate measurement techniques that account for discrepancies between standardised and on-road fuel consumption.

Parental versus child reporting of fruit and vegetable consumption

Directory of Open Access Journals (Sweden)

de Vries Nanne K

2007-08-01

and we recommend that researchers clearly indicate which source of information they use in their studies as it remains unclear which source is more valid. However, when the effects of interventions are studied at the group level, our results suggest that it makes no difference whether children or parents report the child's fruit consumption. The same holds for determinant studies; both parental and child reports can be used. However, perceptions of these factors differ significantly.

World Energy Resources and New Technologies

Science.gov (United States)

Szmyd, Janusz S.

2016-01-01

The development of civilisation is linked inextricably with growing demand for electricity. Thus, the still-rapid increase in the level of utilisation of natural resources, including fossil fuels, leaves it more and more urgent that conventional energy technologies and the potential of the renewable energy sources be made subject to re-evaluation. It is estimated that last 200 years have seen use made of more than 50% of the available natural resources. Equally, if economic forecasts prove accurate, for at least several more decades, oil, natural gas and coal will go on being the basic primary energy sources. The alternative solution represented by nuclear energy remains a cause of considerable public concern, while the potential for use to be made of renewable energy sources is seen to be very much dependent on local environmental conditions. For this reason, it is necessary to emphasise the impact of research that focuses on the further sharpening-up of energy efficiency, as well as actions aimed at increasing society's awareness of the relevant issues. The history of recent centuries has shown that rapid economic and social transformation followed on from the industrial and technological revolutions, which is to say revolutions made possible by the development of power-supply technologies. While the 19th century was "the age of steam" or of coal, and the 20th century the era of oil and gas, the question now concerns the name that will at some point come to be associated with the 21st century. In this paper, the subjects of discussion are primary energy consumption and energy resources, though three international projects on the global scale are also presented, i.e. ITER, Hydrates and DESERTEC. These projects demonstrate new scientific and technical possibilities, though it is unlikely that commercialisation would prove feasible before 2050. Research should thus be focused on raising energy efficiency. The development of high-efficiency technologies that

Perspectives on fuel ethanol consumption and trade

International Nuclear Information System (INIS)

Walter, Arnaldo; Dolzan, Paulo; Piacente, Erik; Borges da Cunha, Kamyla; Rosillo-Calle, Frank

2008-01-01

Since the year 2000 or so there has been a rapid growth on fuel ethanol production and consumption, particularly in US and Brazil. Ethanol trade represented about 10% of world consumption in 2005, Brazil being the main exporter. The most important consumer markets - US and European Union (EU) - have trade regimes that constrained the comparative advantages of the most efficient producers, such as Brazil. This paper evaluates the fuel ethanol market up to 2030 together with the potential for international biotrade. Based on forecasts of gasoline consumption and on targets and mandates of fuel ethanol use, it is estimated that demand could reach 272 Gl in 2030, displacing 10% of the estimated demand of gasoline (Scenario 1), or even 566 Gl in the same year, displacing about 20% of the gasoline demand (Scenario 2). The analysis considers fuel ethanol consumption and production in US, EU-25, Japan, China, Brazil and the rest of the world (ROW-BR). Without significant production of ethanol from cellulosic materials in this period, displacing 10% of the gasoline demand in 2030, at reasonable cost, can only be accomplished by fostering fuel ethanol production in developing countries and enhancing ethanol trade. If the US and EU-25 reach their full production potential (based on conventional routes), the minimum amount that could be traded in 2030 would be about 34 Gl. Displacing 20% of the gasoline demand by 2030 will require the combined development of second-generation technologies and large-scale international trade in ethanol fuel. Without second-generation technologies, Scenario 2 could become a reality only with large-scale production of ethanol from sugarcane in developing countries, e.g., Brazil and ROW-BR could be able to export at least 14.5 Gl in 2010, 73.9 Gl in 2020 and 71.8 Gl in 2030. (author)

Evaluating United States and world consumption of neodymium, dysprosium, terbium, and praseodymium in final products

Science.gov (United States)

Hart, Matthew

This paper develops scenarios of future rare-earth-magnet metal (neodymium, dysprosium, terbium, and praseodymium) consumption in the permanent magnets used in wind turbines and hybrid electric vehicles. The scenarios start with naive base-case scenarios for growth in wind-turbine and hybrid-electric-vehicle sales over the period 2011 to 2020, using historical data for each good. These naive scenarios assume that future growth follows time trends in historical data and does not depend on any exogenous variable. Specifically, growth of each technological market follows historical time trends, and the amount of rare earths used per unit of technology remains fixed. The chosen reference year is 2010. Implied consumptions of the rare earth magnet metals are calculated from these scenarios. Assumptions are made for the material composition of permanent magnets, the market share of permanent-magnet wind turbines and vehicles, and magnet weight per unit of technology. Different scenarios estimate how changes in factors like the material composition of magnets, growth of the economy, and the price of a substitute could affect future consumption. Each scenario presents a different method for reducing rare earth consumption and could be interpreted as potential policy choices. In 2010, the consumption (metric tons, rare-earth-oxide equivalent) of each rare-earth-magnet metal was as follows. Total neodymium consumption in the world for both technologies was 995 tons; dysprosium consumption was 133 tons; terbium consumption was 50 tons; praseodymium consumption was zero tons. The base scenario for wind turbines shows there could be strong, exponential growth in the global wind turbine market. New U.S. sales of hybrid vehicles would decline (in line with the current economic recession) while non-U.S. sales increase through 2020. There would be an overall increase in the total amount of magnetic rare earths consumed in the world. Total consumption of each rare earth in the short

Methods and technologies of energy conservation in trade business

Energy Technology Data Exchange (ETDEWEB)

Kalveram, G

1983-10-01

Proposals to devise a structure of energy consumers in the Federal Republic of Germany mostly make use of the following division: industry, transport, and households, small consumers and other consumers. The third consumer group, which is supposed to include also trading businesses, accounts for approximately 44% of the total energy consumption. The remaining 56% are consumed by the industry (39%) and transport (17%). The level of energy consumption and energy cost in the trade is determined by a multitude of factors specific to the enterprise, such as for instance the geographic position of the undertaking, i.e. differing climatic conditions, opening times, condition of the buildings and technical equipment. In spite of this, considerable amounts can be saved if the energy sources respectively the aggregates powered with them are used carefully and economically and if the most recent energy-saving technologies are taken into account.

Mine Waste Technology Program. In Situ Source Control Of Acid Generation Using Sulfate-Reducing Bacteria

Science.gov (United States)

This report summarizes the results of the Mine Waste Technology Program (MWTP) Activity III, Project 3, In Situ Source Control of Acid Generation Using Sulfate-Reducing Bacteria, funded by the U.S. Environmental Protection Agency (EPA) and jointly administered by EPA and the U.S....

The dual role of external technology sourcing in technological exploration

DEFF Research Database (Denmark)

Vanhaverbeke, Wim; Li-Ying, Jason; van de Vrande, Vareska

2013-01-01

from non-partners, partners may play a role because of whom they know. That is, they inform the firm about technological opportunities beyond its corporate venturing network. The empirical analysis supports the dual role of venturing partners in facilitating the two types of explorative learning.......We refine the concept of boundary-spanning exploration, by making a distinction between explorative learning from partners and from non-partners (Partners are organizations with whom a focal firm has some kind of external venturing relations, i.e. technological alliances, corporate venturing...... capital, or M&As). These partners play a dual role: in explorative learning from partners, a firm teams up with external venturing partners to co-develop or transfer technology. Partners’ technology base (what they know) is driving explorative learning from partners. In contrast, in explorative learning...

Technology and applications of broad-beam ion sources used in sputtering. Part II. Applications

International Nuclear Information System (INIS)

Harper, J.M.E.; Cuomo, J.J.; Kaufman, H.R.

1982-01-01

The developments in broad-beam ion source technology described in the companion paper (Part I) have stimulated a rapid expansion in applications to materials processing. These applications are reviewed here, beginning with a summary of sputtering mechanisms. Next, etching applications are described, including microfabrication and reactive ion beam etching. The developing area of surface layer applications is summarized, and related to the existing fields of oxidation and implantation. Next, deposition applications are reviewed, including ion-beam sputter deposition and the emerging technique of ion-assisted vapor deposition. Many of these applications have been stimulated by the development of high current ion sources operating in the energy range of tens of hundreds of eV. It is in this energy range that ion-activated chemical etching is efficient, self-limiting compound layers can be grown, and the physical properties of vapor-deposited films can be modified. In each of these areas, broad ion beam technology provides a link between other large area plasma processes and surface analytical techniques using ion beams

Effects of Carbohydrate Consumption Case Study: carbohydrates in Bread

Directory of Open Access Journals (Sweden)

Neacsu N.A.

2014-12-01

Full Text Available Carbohydrates perform numerous roles in living organisms; they are an important source of energy. The body uses carbohydrates to make glucose which is the fuel that gives it energy and helps keep everything going. However, excess carbohydrate consumption has negative health effects. Bread is a basic product in our nutrition and it also is a product with a high content of carbohydrates. So, it is important to find out more information on bread and on the recommended bread type best for consumption.

Reducing water freshwater consumption at coal-fired power plants : approaches used outside the United States.

Energy Technology Data Exchange (ETDEWEB)

Elcock, D. (Environmental Science Division)

2011-05-09

Coal-fired power plants consume huge quantities of water, and in some water-stressed areas, power plants compete with other users for limited supplies. Extensive use of coal to generate electricity is projected to continue for many years. Faced with increasing power demands and questionable future supplies, industries and governments are seeking ways to reduce freshwater consumption at coal-fired power plants. As the United States investigates various freshwater savings approaches (e.g., the use of alternative water sources), other countries are also researching and implementing approaches to address similar - and in many cases, more challenging - water supply and demand issues. Information about these non-U.S. approaches can be used to help direct near- and mid-term water-consumption research and development (R&D) activities in the United States. This report summarizes the research, development, and deployment (RD&D) status of several approaches used for reducing freshwater consumption by coal-fired power plants in other countries, many of which could be applied, or applied more aggressively, at coal-fired power plants in the United States. Information contained in this report is derived from literature and Internet searches, in some cases supplemented by communication with the researchers, authors, or equipment providers. Because there are few technical, peer-reviewed articles on this topic, much of the information in this report comes from the trade press and other non-peer-reviewed references. Reducing freshwater consumption at coal-fired power plants can occur directly or indirectly. Direct approaches are aimed specifically at reducing water consumption, and they include dry cooling, dry bottom ash handling, low-water-consuming emissions-control technologies, water metering and monitoring, reclaiming water from in-plant operations (e.g., recovery of cooling tower water for boiler makeup water, reclaiming water from flue gas desulfurization [FGD] systems), and

Building environment assessment and energy consumption estimation using smart phones

Science.gov (United States)

Li, Xiangli; Zhang, Li; Jia, Yingqi; Wang, Zihan; Jin, Xin; Zhao, Xuefeng

2017-04-01

In this paper, an APP for building indoor environment evaluation and energy consumption estimation based on Android platform is proposed and established. While using the APP, the smart phone built-in sensors are called for real-time monitoring of the building environmental information such as temperature, humidity and noise, etc. the built-in algorithm is developed to calculate the heat and power consumption, and questionnaires, grading and other methods are used to feed back to the space heating system. In addition, with the application of the technology of big data and cloud technology, the data collected by users will be uploaded to the cloud. After the statistics of the uploaded data, regional difference can be obtained, thus providing a more accurate basis for macro-control and research of energy, thermal comfort, greenhouse effect.

Rationalization of water consumption in paper industry

Directory of Open Access Journals (Sweden)

Žarković Darja

2004-01-01

Full Text Available The subject of this paper was to consider the possibilities of economical paper production with rationalization of water consumption. In accordance with the principles of viable development. The pulp & paper industry has had to face global market needs and strict regulation concerning the environment. The basic motive was to provide consistent and high product quality, which is competitive on the market. The pulp & paper industry is one of the largest consumers and pollutants of natural resources. In that light, the rationalization of raw material, water, energy and chemicals consumption with minimization of environmental impact is essential. The European directive on environmental protection obliges producers of pulp & paper to decrease the volume of wastewater and to increase the efficiency treatment. Pulp and paper industry in Serbia and Montenegro will also be faced with the demands for environmental protection. Numerous examples of water consumption rationalization and improvement of water quality in the pulp & paper industry could be found in different literature sources. It is necessary to increase water system closure and implement up-to-date treatment methods. The possibilities for water consumption rationalization, in a real system the paperboard mill UMKA, were examined.

Environmental and institutional considerations in the development and implementation of biomass energy technologies

Energy Technology Data Exchange (ETDEWEB)

Schwab, C.

1979-09-01

The photosynthetic energy stored in plant and organic waste materials in the United States amounts to approximately 40% of the nation's total energy consumption. Conversion of this energy to usable power sources is a complex process, involving many possible materials, conversion technologies, and energy products. Near-term biomass technologies are predominantly based on traditional fuel use and have the advantage over other solar technologies of fitting into existing tax and business practices. However, no other solar technology has the potential for such large environmental impacts. Unlike the conversion of sun, wind, and ocean thermal energy, the conversion of the biomass energy source, in the form of biomass residues and wastes, can create problems. Environmental impacts may be significant, and legal responses to these impacts are a key determinant to the widespread adoption of biomass technologies. This paper focuses on the major legal areas which will impact on biomass energy conversion. These include (1) the effect of existing state and federal legislation, (2) the role of regulatory agencies in the development of biomass energy, (3) governmental incentives to biomass development, and (4) legal issues surrounding the functioning of the technologies themselves. Emphasis is placed on the near-term technologies whose environmental impacts and institutional limitations are more readily identified. If biomass energy is to begin to achieve its apparently great potential, these questions must receive immediate attention.

PM sources in a highly industrialised area in the process of implementing PM abatement technology. Quantification and evolution.

Science.gov (United States)

Cruz Minguillón, María; Querol, Xavier; Alastuey, Andrés; Monfort, Eliseo; Vicente Miró, José

2007-10-01

Principal component analysis (PCA) coupled with a multilinear regression analysis (MLRA) was applied to PM(10) speciation data series (2002-2005) from four sampling sites in a highly industrialised area (ceramic production) in the process of implementing emission abatement technology. Five common factors with similar chemical profiles were identified at all the sites: mineral, regional background (influenced by the industrial estate located on the coast: an oil refinery and a power plant), sea spray, industrial 1 (manufacture and use of glaze components, including frit fusion) and road traffic. The contribution of the regional background differs slightly from site to site. The mineral factor, attributed to the sum of several sources (mainly the ceramic industry, but also with minor contributions from soil resuspension and African dust outbreaks) contributes between 9 and 11 microg m(-3) at all the sites. Source industrial 1 entails an increase in PM(10) levels between 4 and 5 microg m(-3) at the urban sites and 2 microg m(-3) at the suburban background site. However, after 2004, this source contributed less than 2 microg m(-3) at most sites, whereas the remaining sources did not show an upward or downward trend along the study period. This gradual decrease in the contribution of source industrial 1 coincides with the implementation of PM abatement technology in the frit fusion kilns of the area. This relationship enables us to assess the efficiency of the implementation of environmental technologies in terms of their impact on air quality.

Technologies for a sustainable development; Technologies pour un developpement durable

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

The European Event on Technology (EET), a recurrent annual event since 1992, is a major meeting opportunity for researchers and engineers as well as private and public decision-makers, on technologies, their evolution and their industrial and social implications. In less than a decade, sustainable development has become both an economic and a political priority. It was urgent and legitimate that those who are the mainsprings should take hold of the subject and give it technological content, estimate its costs and define clear timetables. The debates consist of: plenary sessions on environmental, social and economic stakes of sustainable development and the challenges for, and commitment of engineers, managers and politicians with respect to these goals; and workshops, which provide an overview of recently acquired or upcoming technologies developed by sector: energy, transports, new information technologies, new industrial manufacturing technologies (materials, products, services), waste management, global environment monitoring, water management, bio-technologies, and innovation management. This document brings together the different talks given by the participants. Among these, the following ones fall into the energy and environment scope: energy efficiency of buildings: towards energy autonomy; superconductors enable in new millennium for electric power industry; advanced gas micro-turbine-driven generator technology; environmental and technical challenges of an offshore wind farm; future nuclear energy systems; modelling combustion in engines: progress and prospects for reducing emissions; on-board computers: reduction in consumption and emissions of engine-transmission units for vehicles; polymer-lithium batteries: perspectives for zero-emission traction; hybrid vehicles and energy/environmental optimization: paths and opportunities; fuel cells and zero-emission: perspectives and developments; global change: causes, modeling and economic issues; the GMES

A Hybrid dasymetric and machine learning approach to high-resolution residential electricity consumption modeling

Energy Technology Data Exchange (ETDEWEB)

Morton, April M [ORNL; Nagle, Nicholas N [ORNL; Piburn, Jesse O [ORNL; Stewart, Robert N [ORNL; McManamay, Ryan A [ORNL

2017-01-01

As urban areas continue to grow and evolve in a world of increasing environmental awareness, the need for detailed information regarding residential energy consumption patterns has become increasingly important. Though current modeling efforts mark significant progress in the effort to better understand the spatial distribution of energy consumption, the majority of techniques are highly dependent on region-specific data sources and often require building- or dwelling-level details that are not publicly available for many regions in the United States. Furthermore, many existing methods do not account for errors in input data sources and may not accurately reflect inherent uncertainties in model outputs. We propose an alternative and more general hybrid approach to high-resolution residential electricity consumption modeling by merging a dasymetric model with a complementary machine learning algorithm. The method s flexible data requirement and statistical framework ensure that the model both is applicable to a wide range of regions and considers errors in input data sources.

FACT : forgiving agent comfort technology

NARCIS (Netherlands)

Zeiler, W.; Wortel, W.; Kamphuis, I.G.; Akkermans, Hans; Jelsma, J.; Bakker, L.

2005-01-01

To further reduce energy consumption of office buildings, a new control technology is needed in which the end-user behaviour is integrated. Improvement of the energy consumption is offered by agent-based systems for energy management in buildings, as well as possibilities for enhancing the comfort

The Aluminum Smelting Process and Innovative Alternative Technologies

Science.gov (United States)

Drabløs, Per Arne

2014-01-01

Objective: The industrial aluminum production process is addressed. The purpose is to give a short but comprehensive description of the electrolysis cell technology, the raw materials used, and the health and safety relevance of the process. Methods: This article is based on a study of the extensive chemical and medical literature on primary aluminum production. Results: At present, there are two main technological challenges for the process—to reduce energy consumption and to mitigate greenhouse gas emissions. A future step may be carbon dioxide gas capture and sequestration related to the electric power generation from fossil sources. Conclusions: Workers' health and safety have now become an integrated part of the aluminum business. Work-related injuries and illnesses are preventable, and the ultimate goal to eliminate accidents with lost-time injuries may hopefully be approached in the future. PMID:24806723

An experimental study on defrosting heat supplies and energy consumptions during a reverse cycle defrost operation for an air source heat pump

International Nuclear Information System (INIS)

Dong Jiankai; Deng Shiming; Jiang Yiqiang; Xia Liang; Yao Yang

2012-01-01

For a space heating air source heat pump (ASHP) unit, when its outdoor coil surface temperature is below both the air dew point temperature and the freezing point of water, frost will form on its outdoor coil surface. Frosting affects its operational performance and energy efficiency. Therefore, periodic defrosting is necessary. Currently, the most widely used standard defrosting method for ASHP units is reverse cycle defrost. The energy that should have been used for space heating is used to melt frost, vaporize the melted frost off outdoor coil surface and heat ambient air during defrosting. It is therefore necessary to study the sources of heat supplies and the end-uses of the heat supplied during a reverse cycle defrost operation. In this paper, firstly, an experimental setup is described and experimental procedures are detailed. This is followed by reporting the experimental results and the evaluation of defrosting efficiency for the experimental ASHP unit. Finally, an evaluation of defrosting heat supplies and energy consumptions during a revere cycle defrost operation for the experimental ASHP unit is presented. The experimental and evaluation results indicated that the heat supply from indoor air contributed to 71.8% of the total heat supplied for defrosting and 59.4% of the supplied energy was used for melting frost. The maximum defrosting efficiency could be up to 60.1%. - Highlights: ► Heat supply and consumption during reverse cycle defrost was experimentally studied. ► Indoor air contributed to >70% of total heat supply when indoor fan was turned on. ► ∼60% of the supplied energy was used for melting frost. ► Alternate heat supply other than indoor air should be explored.

Power production and energy consumption in Norway

International Nuclear Information System (INIS)

2001-03-01

The main electrical resource of Norway comes from its rivers: 99% of the electric power is produced by hydroelectric power plants. Other sources, like wind and natural gas, are envisaged for the enhancement of Norway's energy production capacity. In this document, the part devoted to power production presents the different electricity production sources and their impact on the Norwegian economy. The energy consumption is detailed in the third part with an historical review of its evolution and a description of the main sectors involved in this consumption. The forth part describes the main actors of the energy sector with their industrial structure, the research institutes and universities performing R and D in this domain, and the energy trades with surrounding countries. The fifth part stresses on the research projects, on the government promoting actions through the Norwegian Research Council, and gives some examples of todays research projects. The sixth part deals with international cooperation in the R and D domain with a particular attention given to the relations between Norway, France and Europe. (J.S.)

Media Consumption on the World Wide Web: Integrating Theories of Media Choice and Global Media Flows to Explain Global Cultural Consumption

Science.gov (United States)

Taneja, Harsh

2014-01-01

The cross border availability of media content has raised speculations that content preferences would largely drive audience choices. In such a scenario, technologies and institutional structures would primarily shape patterns of global cultural consumption, sweeping away old allegiances based on cultural traits such as language and geography. On…

Wealth Effects on Household Final Consumption: Stock and Housing Market Channels

Directory of Open Access Journals (Sweden)

Yener Coskun

2018-06-01

Full Text Available The study primarily explores the linkage between wealth effects, arising from stock and housing market channels, and household final consumption for 11 advanced countries over the period from 1970 Q1 to 2015 Q4. As a modelling strategy, we employ regression analysis through the common correlated effects mean group (CCEMG estimator, as well as Durbin–Hausman cointegration and Dumitrescu and Hurlin (2012 causality tests. The study provides various pieces of evidence through whole-panel and country-level analyses. In this respect, we find that consumption is mostly explained by income and housing wealth is positively and significantly correlated with consumption. As counter-intuitive evidence, we detect a negative linkage between consumption and stock wealth. The evidence also suggests a long-run cointegration relationship among consumption, income, interest rates, housing wealth, and stock wealth. Moreover, we find bidirectional causality between consumption and income, stock wealth, housing wealth, and interest rates. Overall, the evidence implies that housing wealth, rather than stock wealth, is the primary source of consumption growth in advanced countries.

The Utility of Focus Group Interviews to Capture Dietary Consumption Data in the Distant Past: Dairy Consumption in Kazakhstan Villages 50 Years Ago

Science.gov (United States)

Schwerin, Michael; Schonfeld, Sara; Drozdovitch, Vladimir; Akimzhanov, Kuat; Aldyngurov, Daulet; Bouville, André; Land, Charles; Luckyanov, Nicholas; Mabuchi, Kiyohiko; Semenova, Yulia; Simon, Steven; Tokaeva, Alma; Zhumadilov, Zhaxybay; Potischman, Nancy

2013-01-01

From 1949 to 1962, residents of several villages in Kazakhstan Abstract: received substantial doses of radiation to the thyroid gland resulting from nuclear tests conducted at the Semipalatinsk Nuclear Test Site. The primary source of radiation was internal from an intake of radioactive iodine by consumption of contaminated dairy products. A previous research study of childhood exposure and thyroid disease in this region gathered limited data on study participants’ dairy intake at the time of the fallout for the purpose of estimating past radiation doses. Because many subjects were too young at the time of the nuclear tests to recall dietary consumption and existing sources of archival data are limited, it was necessary to interview parents and other village residents who cared for children during this time; older adults ranging in age from 75 to 90 years old. Results from 11 focus group interviews conducted in 2007 with 82 women from 4 villages in Kazakhstan yielded group-level estimates of age-, gender-, ethnicity- and village-specific dairy consumption patterns in rural Kazakhstan during the 1950s. Children typically consumed cow’s milk with limited consumption of mare, goat, and sheep milk; and consumed dairy products such as sour milk (airan), soft cottage cheese (tvorog), and fermented mare milk (koumiss) with the greatest amounts of koumiss reported at ages 15–21. The consumption patterns differed by age and between Kazakh and Russian children, which should lead to different estimates of radiation exposure to the thyroid. This study demonstrated the utility of focus groups to obtain quantitative estimates for dietary intake in the distant past. PMID:24286002

Rural Dwellers' Knowledge of Nutrition and their Food Consumption ...

African Journals Online (AJOL)

Rev Olaleye

Food is the main source of good nutrition and we eat food to supply us with .... Table 3: Distribution of Respondents on Frequency of Food Consumption. Food Groups. F. (%). Never. F. (%) ..... they alone cannot solve the problem of malnutrition.

Minimizing water consumption when producing hydropower

Science.gov (United States)

Leon, A. S.

2015-12-01

In 2007, hydropower accounted for only 16% of the world electricity production, with other renewable sources totaling 3%. Thus, it is not surprising that when alternatives are evaluated for new energy developments, there is strong impulse for fossil fuel or nuclear energy as opposed to renewable sources. However, as hydropower schemes are often part of a multipurpose water resources development project, they can often help to finance other components of the project. In addition, hydropower systems and their associated dams and reservoirs provide human well-being benefits, such as flood control and irrigation, and societal benefits such as increased recreational activities and improved navigation. Furthermore, hydropower due to its associated reservoir storage, can provide flexibility and reliability for energy production in integrated energy systems. The storage capability of hydropower systems act as a regulating mechanism by which other intermittent and variable renewable energy sources (wind, wave, solar) can play a larger role in providing electricity of commercial quality. Minimizing water consumption for producing hydropower is critical given that overuse of water for energy production may result in a shortage of water for other purposes such as irrigation, navigation or fish passage. This paper presents a dimensional analysis for finding optimal flow discharge and optimal penstock diameter when designing impulse and reaction water turbines for hydropower systems. The objective of this analysis is to provide general insights for minimizing water consumption when producing hydropower. This analysis is based on the geometric and hydraulic characteristics of the penstock, the total hydraulic head and the desired power production. As part of this analysis, various dimensionless relationships between power production, flow discharge and head losses were derived. These relationships were used to withdraw general insights on determining optimal flow discharge and

Sources of variation in oxygen consumption of aquatic animals demonstrated by simulated constant oxygen consumption and respirometers of different sizes

DEFF Research Database (Denmark)

Svendsen, Morten Bo Søndergaard; Bushnell, P.G.; Christensen, Emil Aputsiaq Flindt

2016-01-01

As intermittent-flow respirometry has become a common method for the determination of resting metabolism or standard metabolic rate (SMR), this study investigated how much of the variability seen in the experiments was due to measurement error. Experiments simulated different constant oxygen cons...... oxygen consumption rates of fishes in systems with reasonable RFRs mainly comes from the animal, not from the measuring equipment....

Research on control technology of hardware parallelism for marine controlled source electromagnetic transmitter

Science.gov (United States)

Wang, Meng; Deng, Ming; Luo, Xianhu; Zhao, Qingxian; Chen, Kai; Jing, Jianen

2018-02-01

The marine controlled source electromagnetic (CSEM) method has been recognized as an effective exploration method of shallow hydrocarbons around the world. We developed our own underwater marine CSEM transmitter that consisted of many functional modules with various response times. We previously adopted a centralized software-control technology to design the transmitter circuit topological structure. That structure probably generated a control disorder or malfunction. These undesirable conditions could lead to repeated recovery and deployment of the transmitter, which not only consumed time but also affected data continuity and establishment of stable and continuous CSEM field. We developed an instrument design concept named ‘control technology of hardware parallelism’. In this design, a noteworthy innovation of our new technology is to solve the above-mentioned problems at the physical and fundamental levels. We used several self-contained control-units to simultaneously accomplish the predetermined functions of the transmitter. The new solution relies on two technologies: multi-core embedded technology and multi-channel parallel optical-fiber data transmission technology. The first technology depends on many independent microcontrollers. Every microcontroller is only used to achieve a customized function. The second one relies on several multiple optical-fiber transmission channels realized by a complex programmable logic device and two optical-fiber conversion devices, which are used to establish a communication link between the shipboard monitoring and control-unit and underwater transmitter. We have conducted some marine experiments to verify the reliability and stability of the new method. In particular, the new technology used in the transmitter system could help us obtain more useful measured data in a limited time, improve real-time efficiency, and support the establishment of a stable CSEM field.

Efficient Business Service Consumption by Customization with Variability Modelling

Directory of Open Access Journals (Sweden)

Michael Stollberg

2010-07-01

Full Text Available The establishment of service orientation in industry determines the need for efficient engineering technologies that properly support the whole life cycle of service provision and consumption. A central challenge is adequate support for the efficient employment of komplex services in their individual application context. This becomes particularly important for large-scale enterprise technologies where generic services are designed for reuse in several business scenarios. In this article we complement our work regarding Service Variability Modelling presented in a previous publication. There we presented an approach for the customization of services for individual application contexts by creating simplified variants, based on model-driven variability management. That work presents our revised service variability metamodel, new features of the variability tools and an applicability study, which reveals that substantial improvements on the efficiency of standard business service consumption under both usability and economic aspects can be achieved.

Gender and ethical consumption of energy in smart homes

DEFF Research Database (Denmark)

Gram-Hanssen, Kirsten; Mechlenborg, Mette; Madsen, Line Valdorff

2017-01-01

An adaption to smart technologies in homes will inevitably produce new conditions for everyday life and thus also for relations between gender and ethical consumption. The home can be seen as a feminine domain and research shows that men tend to be more technically interested, whereas women gener...... gender inequalities in everyday practices.......An adaption to smart technologies in homes will inevitably produce new conditions for everyday life and thus also for relations between gender and ethical consumption. The home can be seen as a feminine domain and research shows that men tend to be more technically interested, whereas women...... in everyday life. Acknowledging how everyday life and home are gendered and that gender roles are produced and reproduced through everyday practices, is therefore vital to ensure a successful transition into a smart home future. Otherwise, the risk is that the development will contribute to producing further...

DAIRY TECHNOLOGY IMPACTS ON LIVEHOODS OF DAIRY PRODUCERS IN CENTRAL ETHIOPIA

Directory of Open Access Journals (Sweden)

Kassahun Melesse

2013-07-01

Full Text Available A survey was conducted in 2012 to assess the impact of dairy technologies on the livelihood of dairying households in Ada’a and Lume districts of central Ethiopia. A total of 108 dairy farms were interviewed using structured questionnaire. Dairying has significant contribution as a sustainable source of income to the dairy producing households. It contributed about 62% and 66% of the total monthly income in Ada’a and Lume districts, respectively. Dairying was the first income source for about 80% and 62% of the dairy producing households in Ada’a and Lume districts, respectively. On the other hand, 92.9 % and 88.9 % of the respondents in Ada’a and Lume districts respectively explained that dairy technology adoption has significantly increased their household income. About 56% and 32% of households in Ada’a and Lume districts were found to save money from dairying in a traditional form of saving. Adoption of dairy technologies has also an impact on the consumption of milk and milk products as all family members in about 77.5% and 87.1% of households in Ada’a and Lume districts, respectively could consume more milk.

Analysis of rural residential energy consumption and corresponding carbon emissions in China

International Nuclear Information System (INIS)

Yao Chunsheng; Chen Chongying; Li Ming

2012-01-01

The analysis of rural residential energy consumption in China from 2001 to 2008 and corresponding impacts on climate change is presented in the paper. It is found that rural residential energy consumption has shown obvious transition from non-commercial energy to commercial energy. The percentage of biomass energy consumption dropped from 81.5% in 2001 to 70.9% in 2008, while the percentage of commercial energy increased from 17.1% to 25.1%. Besides, other renewable energy increased very fast with annual growth rate of 19.8%. Correspondingly, total CO 2 emissions from rural residential energy consumption had significant increase from 152.2 Million tons in 2001 to 283.6 Million tons in 2008. The annual growth rate of per capita CO 2 emissions was nearly 2 times faster than that of urban area. The major driving force for the consumption of commercial energy was the income of rural farmers, while strong rural energy policies supported the development of renewable energy. To satisfy the goals of energy supply and CO 2 emissions reduction in rural areas, it is advised to change the energy structure and improve the energy efficiency, such as to generate electricity using renewable technologies and to replace coal with modern biomass energy for cooking and heating. - Highlights: ► This study analyzed rural residential energy consumption in China 2001–2008. ► It shows obvious transition from non-commercial energy to commercial energy. ► CO 2 emissions from rural residential energy consumption have significant increases. ► Major driving forces are income of rural farmers and rural energy policies. ► Generate electricity using renewable technology and replace coal with modern biomass.

Energy sustainability: consumption, efficiency, and ...

Science.gov (United States)

One of the critical challenges in achieving sustainability is finding a way to meet the energy consumption needs of a growing population in the face of increasing economic prosperity and finite resources. According to ecological footprint computations, the global resource consumption began exceeding planetary supply in 1977 and by 2030, global energy demand, population, and gross domestic product are projected to greatly increase over 1977 levels. With the aim of finding sustainable energy solutions, we present a simple yet rigorous procedure for assessing and counterbalancing the relationship between energy demand, environmental impact, population, GDP, and energy efficiency. Our analyses indicated that infeasible increases in energy efficiency (over 100 %) would be required by 2030 to return to 1977 environmental impact levels and annual reductions (2 and 3 %) in energy demand resulted in physical, yet impractical requirements; hence, a combination of policy and technology approaches is needed to tackle this critical challenge. This work emphasizes the difficulty in moving toward energy sustainability and helps to frame possible solutions useful for policy and management. Based on projected energy consumption, environmental impact, human population, gross domestic product (GDP), and energy efficiency, for this study, we explore the increase in energy-use efficiency and the decrease in energy use intensity required to achieve sustainable environmental impact le

Improvement of sunflower for consumption

Directory of Open Access Journals (Sweden)

Dijanović Dijana

2003-01-01

Full Text Available Growing sunflower (Heliianthus annuus L for consumption is becoming more and more attractive in the whole world and in our country, as well. The consumption of this product has been considerably increased because it is being used more and more in various forms: sunflower seed in a hull, hulled kernels fried or non-fried, salted or non-salted with addition of various spices. The sunflower kernel is used for preparing over 100 different food products: special types of bread, cakes, ice-cream, chocolate. In accordance with the trade demands, the aims of sunflower seeds for consumption improvement are: high productivity, greater content of proteins, lesser content of oil, oncreased mass of 1000 seeds, lesser portion of the hull easy nibbling, as well as tolerance to dominant diseases in the growing region. In the Agricultural and Technological Research Center in Zajecar, 4 genotypes of protein sunflower (two cultivars and two hybrids have been created so far. This study shows the results achieved in increasing the content of protein, the mass of 1000 seeds, decreasing the content of oil and hull of the new 90 hybrid combination. The hybrid combinations were obtained by crossing of the CMS and restorer lines.

Renewable energy sources, the internet of things and the third industrial revolution: Smart grid and contemporary information and communication technologies

Science.gov (United States)

Kitsios, Aristidis; Bousakas, Konstantinos; Salame, Takla; Bogno, Bachirou; Papageorgas, Panagiotis; Vokas, Georgios A.; Mauffay, Fabrice; Petit, Pierre; Aillerie, Michel; Charles, Jean-Pierre

2017-02-01

In this paper, the energy efficiency of a contemporary Smart Grid that is based on Distributed Renewable Energy Sources (DRES) is examined under the scope of the communication systems utilized between the energy loads and the energy sources. What is evident is that the Internet of Things (IoT) technologies that are based on the existing Web infrastructure can be heavily introduced in this direction especially when combined with long range low bandwidth networking technologies, power line communication technologies and optimization methodologies for renewable energy generation. The renewable energy generation optimization will be based on devices embedded in the PV panels and the wind power generators, which will rely on bidirectional communications with local gateways and remote control stations for achieving energy efficiency. Smart meters and DRES combined with IoT communications will be the enabling technologies for the ultimate fusion of Internet technology and renewable energy generation realizing the Energy Internet.

Fuel wood consumption pattern of tribal communities in cold desert of the Lahaul valley, North-Western Himalaya, India

Energy Technology Data Exchange (ETDEWEB)

Rawat, Yashwant S.; Vishvakarma, Subhash C.R. [G.B. Pant Institute of Himalayan Environment and Development, Kosi-Katarmal, 263 643 Almora, Uttarakhand (India); Todaria, N.P. [Department of Forestry, Post Box No.-59, H.N.B. Garhwal University, Srinagar, Garhwal 246 174, Uttarakhand (India)

2009-11-15

Fuel wood is the primary source of energy in rural areas of the Himalaya. Lack of resources, extremely low temperature and xeric climatic conditions of the study region (Khoksar - 3200 m, Jahlma - 3000 m, Hinsa - 2700 m and Kuthar - 2600 m) of cold desert of the Lahaul valley has led to serious deforestation due to excessive use of fuel wood in the past. On the basis of family sizes, fuel wood consumption was recorded less in large family as compared to small family. The fuel wood is used for various activities such as cooking, water heating, room heating, lighting and livestock rearing, etc. Fuel wood consumption was highest in high altitude villages as compared to low altitude villages irrespective of family size. Fuel wood consumption of 4.32 {+-} 0.99 kg/capita/day was highest at Khoksar for small family during winter season followed by the autumn (2.25 {+-} 0.15 kg/capita/day) and summer (1.38 {+-} 0.13 kg/capita/day). The labour energy expenditure for fuel wood collection was also highest for Khoksar (91.91 MJ/capita/year), followed by Hinsa (61.29 MJ/capita/year), Kuthar (52.01 MJ/capita/year) and Jahlma (51.89 MJ/capita/year), respectively. It was found that fuel wood consumption in the study region was influenced by the local cold climate and season of the year. The present information on fuel wood consumption pattern at different altitudes would be helpful in designing appropriate technologies to develop energy plantations in the region. (author)

Measuring and evaluating energy consumption in street lighting networks

International Nuclear Information System (INIS)

Janiga, P.; Gasparovsky, D.

2012-01-01

Smart metering and smart grid are incoming technologies that provide new opportunities in various fields. In connection with the issue of evaluation of the energy aspects of public lighting networks opens up the possibility of evaluating and measuring consumption. Based on the obtained values would be possible to determine energy consumption of lighting systems. This obtained value could serve as a basis for comparing the relevant networks and thus the optimality assessment of lighting designs. Currently, the measure placed in the switchboard of public lighting. If we have considered sections parametramim same lighting, it is necessary to obtain more value from the measured or determined to assess the consumption of time. Proposal of such methods is still under construction but the basic methods have already been outlined. (Authors)

Households’ use of information and communication technologies – a future challenge for energy savings?

DEFF Research Database (Denmark)

Jensen, Jesper Ole; Gram-Hanssen, Kirsten; Røpke, Inge

2009-01-01

of theories of domestication of technologies, it is argued that aspects such as consumers' creativity in technology use and their non-adaption are relevant aspects to include in policy and regulation discussions on how to limit the escalating electricity consumption from household ICT use.......Increasing consumption of electricity due to a growing number of information and communication technology (ICT) appliances in households is a major challenge to reducing energy consumption. Several studies have predicted escalating ICT-related energy consumption, but relatively little has been said...... and done about possible initiatives to curb this increase. This paper presents results of a research project focusing on how dynamics of consumption influence household energy consumption on ICT. Results of the project include scenarios on how electricity consumption on ICT is expected to grow, suggesting...

Measures to reduce car-fleet consumption - Estimation of effects

International Nuclear Information System (INIS)

Iten, R.; Hammer, S.; Keller, M.; Schmidt, N.; Sammer, K.; Wuestenhagen, R.

2005-09-01

This comprehensive report for the Swiss Federal Office of Energy (SFOE) takes a look at the results of a study that estimated the effects of measures that were to be taken in order to reduce the fuel consumption of fleets of vehicles as part of the SwissEnergy programme. The research reported on aimed to estimate the effects of the Energy Label on energy consumption and research concerning the results to be expected from the introduction of a bonus-malus system. Questions reviewed include the effect of fuel consumption data on making decisions concerning which vehicle to purchase, the effects of the Energy Label on consumption, the awareness of other appropriate information sources, the possible effects of a bonus-malus system and how the effectiveness of the Energy Label could be improved. The answers and results obtained are reviewed and commented on. Finally, an overall appraisal of the situation is presented and recommendations for increasing the effectiveness of the Energy Label are made

The electricity consumption and economic growth nexus: Evidence from Greece

International Nuclear Information System (INIS)

Polemis, Michael L.; Dagoumas, Athanasios S.

2013-01-01

This paper attempts to cast light into the relationship between electricity consumption and economic growth in Greece in a multivariate framework. For this purpose we used cointegration techniques and the vector error correction model in order to capture short-run and long-run dynamics over the sample period 1970–2011. The empirical results reveal that in the long-run electricity demand appears to be price inelastic and income elastic, while in the short-run the relevant elasticities are below unity. We also argue that the causal relationship between electricity consumption and economic growth in Greece is bi-directional. Our results strengthen the notion that Greece is an energy dependent country and well directed energy conservation policies could even boost economic growth. Furthermore, the implementation of renewable energy sources should provide significant benefits ensuring sufficient security of supply in the Greek energy system. This evidence can provide a new basis for discussion on the appropriate design and implementation of environmental and energy policies for Greece and other medium sized economies with similar characteristics. -- Highlights: •We examine the causality between electricity consumption and economic growth. •We used cointegration techniques to capture short-run and long-run dynamics. •The relationship between electricity consumption and GDP is bi-directional. •Residential energy switching in Greece is still limited. •The implementation of renewable energy sources should ensure security of supply

Energy consumption renewable energy development and environmental impact in Algeria - Trend for 2030

Science.gov (United States)

Sahnoune, F.; Imessad, K.; Bouakaz, D. M.

2017-02-01

The study provides a detailed analysis of the energy production and consumption in Algeria and the associated CO2 emissions. Algeria is an important energy producer (oil and natural gas). The production is currently around 155 MToe. The total primary energy consumption amounted to about 58 MToe equivalent to 1.46 Toe/capita. The energy demand is still increasing, an average annual growth rate of more than 6% per year during the last decade. The growth rate for electricity production was almost twice that of the total energy consumption. In 2015, the installed capacity of the electricity generation plants reached 17.6 GW. Electricity consumption was 64.6 TWh and is expected to reach at least 75 TWh in 2020 and 130 TWh in 2030. The already high electricity demand will double by 2030. In the structure of final energy consumption, the transport sector ranks first (36%), natural gas consumption ranks second (28.5%), followed by electricity production (27.7%). By activity, the energy sector is the main source of CO2 emissions, about ¾ of the total and this sector has the most important potential for mitigation measures. CO2 emissions from this energy sector amounted to 112.2 MT CO2 as follows: 33% transport, 31% electricity production and 26% from natural gas combustion for residential use. The integration of renewable sources in the energy mix represents for Algeria a major challenge. In 2015, Algeria adopted an ambitious program for development of renewable energy. The target is to achieve 22 GW capacity of electricity from renewable by 2030 to reach a rate of 27 % of national electricity generation through renewable sources. By implementing this program, CO2 emissions of power generation will be reduced by more than 18% in 2030.

Can renewable energy sources satiate Slovakia's future energy needs?

Energy Technology Data Exchange (ETDEWEB)

Tomis, Igor; Koval, Peter; Janicek, Frantisek; Darula, Ivan

2010-09-15

The paper examines the options for replacing the current energy mix of non-renewable, conventional energy sources solely with renewable sources in the long term within the context of the Slovak environment, possibly combined with nuclear energy in the 50-year horizon. Vital needs are outlined in household energy consumption and energy consumption for industrial and transportation purposes to fulfil in order for Slovakia to become independent of foreign sources in energy supplies.

BASIC APPROACHES TO THE RESEARCH OF RENEWABLE SOURCES OF ENERGY AS THE ENERGY POTENTIAL OF TERRITORIES AND BUILT-UP AREAS

Directory of Open Access Journals (Sweden)

Poddaeva Olga Igorevna

2012-10-01

renewable sources of energy include water, sun, and wind. Wind power engineering best fits the conditions of the Russian territories. However, experts believe that the wind power is to be backed by other sources due to the irregularity of its generation. This approach to the power generation and planning of territories coupled with the integration of renewable energy technologies into architectural designs of buildings and structures will make it possible to identify the prerequisites for the energy generation specialization of the subjects of the Russian Federation on the basis of their climatic conditions and urban development patterns. Private investments into renewable sources of energy will assure sustainable population settlement patterns and optimal energy generation and consumption.

Making it not too obvious. The effect of ambient light feedback on space heating energy consumption

Energy Technology Data Exchange (ETDEWEB)

Maan, S.; Merkus, B.; Ham, J.; Midden, C. [Human-Technology Interaction, Eindhoven University of Technology, PO Box 513, 5600 MB Eindhoven (Netherlands)

2011-03-15

Earlier research investigating persuasive technology - technology designed to influence human behavior or attitude - indicates that persuasive technology can stimulate energy efficient behavior. However, most applications of persuasive technology need people's focal attention to be successful, and people may often not have these cognitive resources available. The current research investigates a form of persuasive technology that is less obvious and easier to process: ambient lighting as persuasive technology. In an experimental study, participants could conserve energy while setting temperatures on a central heating panel and receive feedback about their energy consumption in each task. We tested the effect of feedback through a lamp that gradually changed color dependent on energy consumption and compared these effects to more widely used factual feedback. Half of the participants received lighting feedback, and half of the participants received numerical feedback. To investigate whether ambient feedback is easier to process than numerical feedback, half of the participants performed a cognitive load task in addition to the focal task. Results indicated that feedback through lighting has stronger persuasive effects than numerical feedback. Furthermore, ambient lighting feedback seemed easier to process than numerical feedback because cognitive load interfered with processing numerical feedback, but not with processing lighting feedback. Implications for theory and design of energy consumption feedback systems, persuasive lighting, and (ambient) persuasive technology are discussed.

A review of the validity and reliability of alcohol retail sales data for monitoring population levels of alcohol consumption: a Scottish perspective.

Science.gov (United States)

Robinson, Mark; Thorpe, Rachel; Beeston, Clare; McCartney, Gerry

2013-01-01

To assess the validity and reliability of using alcohol retail sales data to measure and monitor population levels of alcohol consumption. Potential sources of bias that could lead to under- or overestimation of population alcohol consumption based on alcohol retail sales data were identified and, where possible, quantified. This enabled an assessment of the potential impact of each bias on alcohol consumption estimates in Scotland. Overall, considering all the possible sources of overestimation and underestimation, and taking into account the potential for sampling variability to impact on the results, the range of uncertainty of consumption during 2010 was from an overestimate of 0.3 l to an underestimate of 2.4 l of pure alcohol per adult. This excludes the impacts of alcohol stockpiling and alcohol sold through outlets not included in the sampling frame. On balance, there is therefore far greater scope for alcohol retail sales data to be underestimating per adult alcohol consumption in Scotland than there is for overestimation. Alcohol retail sales data offer a robust source of data for monitoring per adult alcohol consumption in Scotland. Consideration of the sources of bias and a comprehensive understanding of data collection methods are essential for using sales data to monitor trends in alcohol consumption.

Technological demands of meat processing-An Asian perspective.

Science.gov (United States)

Zhang, Wangang; Naveena, B Maheswarappa; Jo, Cheorun; Sakata, Ryoichi; Zhou, Guanghong; Banerjee, Rituparna; Nishiumi, Tadayuki

2017-10-01

A rapid increase in the economy, population, industrialization, and urbanization of Asian countries has driven the fast development of their meat industries over recent decades. This consistent increase in meat production and consumption in Asia has been the major cause for the development of the global meat industry. Meat production methods and consumption are very diverse across different regions and countries in Asia, and thus, it is impossible to cover the technological demands of all Asian countries in this review. Here, we have mainly highlighted the differences in meat production methods and consumption in Asia during recent decades and the meat technology demands of three east Asian countries, namely China, Korea, and Japan, and one south Asian country, India. A brief introduction of the meat industry, in particular the production and consumption trend in these countries, is provided in this article. The technology demands for fresh and processed meat products are then reviewed. Copyright © 2017. Published by Elsevier Ltd.

Measurements and modelling of base station power consumption under real traffic loads.

Science.gov (United States)

Lorincz, Josip; Garma, Tonko; Petrovic, Goran

2012-01-01

Base stations represent the main contributor to the energy consumption of a mobile cellular network. Since traffic load in mobile networks significantly varies during a working or weekend day, it is important to quantify the influence of these variations on the base station power consumption. Therefore, this paper investigates changes in the instantaneous power consumption of GSM (Global System for Mobile Communications) and UMTS (Universal Mobile Telecommunications System) base stations according to their respective traffic load. The real data in terms of the power consumption and traffic load have been obtained from continuous measurements performed on a fully operated base station site. Measurements show the existence of a direct relationship between base station traffic load and power consumption. According to this relationship, we develop a linear power consumption model for base stations of both technologies. This paper also gives an overview of the most important concepts which are being proposed to make cellular networks more energy-efficient.

Measurements and Modelling of Base Station Power Consumption under Real Traffic Loads

Directory of Open Access Journals (Sweden)

Goran Petrovic

2012-03-01

Full Text Available Base stations represent the main contributor to the energy consumption of a mobile cellular network. Since traffic load in mobile networks significantly varies during a working or weekend day, it is important to quantify the influence of these variations on the base station power consumption. Therefore, this paper investigates changes in the instantaneous power consumption of GSM (Global System for Mobile Communications and UMTS (Universal Mobile Telecommunications System base stations according to their respective traffic load. The real data in terms of the power consumption and traffic load have been obtained from continuous measurements performed on a fully operated base station site. Measurements show the existence of a direct relationship between base station traffic load and power consumption. According to this relationship, we develop a linear power consumption model for base stations of both technologies. This paper also gives an overview of the most important concepts which are being proposed to make cellular networks more energy-efficient.

Carotenoids Functionality, Sources, and Processing by Supercritical Technology: A Review

Directory of Open Access Journals (Sweden)

Natália Mezzomo

2016-01-01

Full Text Available Carotenoid is a group of pigments naturally present in vegetal raw materials that have biological properties. These pigments have been used mainly in food, pharmaceutical, and cosmetic industries. Currently, the industrial production is executed through chemical synthesis, but natural alternatives of carotenoid production/attainment are in development. The carotenoid extraction occurs generally with vegetal oil and organic solvents, but supercritical technology is an alternative technique to the recovery of these compounds, presenting many advantages when compared to conventional process. Brazil has an ample diversity of vegetal sources inadequately investigated and, then, a major development of optimization and validation of carotenoid production/attainment methods is necessary, so that the benefits of these pigments can be delivered to the consumer.

Environmental degradation, economic growth and energy consumption: Evidence of the environmental Kuznets curve in Malaysia

International Nuclear Information System (INIS)

Saboori, Behnaz; Sulaiman, Jamalludin

2013-01-01

This paper tests for the short and long-run relationship between economic growth, carbon dioxide (CO 2 ) emissions and energy consumption, using the Environmental Kuznets Curve (EKC) by employing both the aggregated and disaggregated energy consumption data in Malaysia for the period 1980–2009. The Autoregressive Distributed Lag (ARDL) methodology and Johansen–Juselius maximum likelihood approach were used to test the cointegration relationship; and the Granger causality test, based on the vector error correction model (VECM), to test for causality. The study does not support an inverted U-shaped relationship (EKC) when aggregated energy consumption data was used. When data was disaggregated based on different energy sources such as oil, coal, gas and electricity, the study does show evidences of the EKC hypothesis. The long-run Granger causality test shows that there is bi-directional causality between economic growth and CO 2 emissions, with coal, gas, electricity and oil consumption. This suggests that decreasing energy consumption such as coal, gas, electricity and oil appears to be an effective way to control CO 2 emissions but simultaneously will hinder economic growth. Thus suitable policies related to the efficient consumption of energy resources and consumption of renewable sources are required. - Highlights: • We investigated the EKC hypothesis by using Malaysian energy aggregated and disaggregated data. • It was found that the EKC is not supported, using the aggregated data (energy consumption). • However using disaggregated energy data (oil, coal and electricity) there is evidence of EKC. • Causality shows no causal relationship between economic growth and energy consumption in the short-run. • Economic growth Granger causes energy consumption and energy consumption causes CO 2 emissions in long-run

HOW DO FIRMS SOURCE EXTERNAL KNOWLEDGE FOR INNOVATION? ANALYSING EFFECTS OF DIFFERENT KNOWLEDGE SOURCING METHODS

OpenAIRE

KI H. KANG; JINA KANG

2009-01-01

In the era of "open innovation", external knowledge is a very important source for technology innovation. In this paper, we investigate the relationship between external knowledge and performance of technology innovation. The effect of external knowledge on the performance of technology innovation can vary with different external knowledge sourcing methods. We identify three ways of external knowledge sourcing: information transfer from informal network, R&D collaboration and technology acqui...

Some problems of neutron source multiplication method for site measurement technology in nuclear critical safety

International Nuclear Information System (INIS)

Shi Yongqian; Zhu Qingfu; Hu Dingsheng; He Tao; Yao Shigui; Lin Shenghuo

2004-01-01

The paper gives experiment theory and experiment method of neutron source multiplication method for site measurement technology in the nuclear critical safety. The measured parameter by source multiplication method actually is a sub-critical with source neutron effective multiplication factor k s , but not the neutron effective multiplication factor k eff . The experiment research has been done on the uranium solution nuclear critical safety experiment assembly. The k s of different sub-criticality is measured by neutron source multiplication experiment method, and k eff of different sub-criticality, the reactivity coefficient of unit solution level, is first measured by period method, and then multiplied by difference of critical solution level and sub-critical solution level and obtained the reactivity of sub-critical solution level. The k eff finally can be extracted from reactivity formula. The effect on the nuclear critical safety and different between k eff and k s are discussed

The relationship between CO2 emission, energy consumption and economic growth in Malaysia: a three-way linkage approach.

Science.gov (United States)

Sulaiman, Chindo; Abdul-Rahim, A S

2017-11-01

This study examines the three-way linkage relationships between CO 2 emission, energy consumption and economic growth in Malaysia, covering the 1975-2015 period. An autoregressive distributed lag approach was employed to achieve the objective of the study and gauged by dynamic ordinary least squares. Additionally, vector error correction model, variance decompositions and impulse response functions were employed to further examine the relationship between the interest variables. The findings show that economic growth is neither influenced by energy consumption nor by CO 2 emission. Energy consumption is revealed to be an increasing function of CO 2 emission. Whereas, CO 2 emission positively and significantly depends on energy consumption and economic growth. This implies that CO 2 emission increases with an increase in both energy consumption and economic growth. Conclusively, the main drivers of CO 2 emission in Malaysia are proven to be energy consumption and economic growth. Therefore, renewable energy sources ought to be considered by policy makers to curb emission from the current non-renewable sources. Wind and biomass can be explored as they are viable sources. Energy efficiency and savings should equally be emphasised and encouraged by policy makers. Lastly, growth-related policies that target emission reduction are also recommended.

Open Source Radiation Hardened by Design Technology