Sample records for sources allen press
-
EPICS: Allen-Bradley hardware reference manual
International Nuclear Information System (INIS)
Nawrocki, G.
1993-01-01
This manual covers the following hardware: Allen-Bradley 6008 -- SV VMEbus I/O scanner; Allen-Bradley universal I/O chassis 1771-A1B, -A2B, -A3B, and -A4B; Allen-Bradley power supply module 1771-P4S; Allen-Bradley 1771-ASB remote I/O adapter module; Allen-Bradley 1771-IFE analog input module; Allen-Bradley 1771-OFE analog output module; Allen-Bradley 1771-IG(D) TTL input module; Allen-Bradley 1771-OG(d) TTL output; Allen-Bradley 1771-IQ DC selectable input module; Allen-Bradley 1771-OW contact output module; Allen-Bradley 1771-IBD DC (10--30V) input module; Allen-Bradley 1771-OBD DC (10--60V) output module; Allen-Bradley 1771-IXE thermocouple/millivolt input module; and the Allen-Bradley 2705 RediPANEL push button module
-
Woody Allen kimpus arhitektuuriga
2000-01-01
Woody Allen protesteerib oma uue lühifilmiga kavatsuse vastu ehitada 16-korruseline ärihoone tema New Yorgi kodu lähedale. W. Allen hindab New Yorgi ajaloolisi rajoone, mida näitab ka oma filmides
-
Energy resolution in liquid argon doped with allene
International Nuclear Information System (INIS)
Ichinose, H.; Doke, T.; Masuda, K.; Shibamura, E.
1989-01-01
Studies have been made on liquid argon as detection medium with large volume and good energy and position resolution. It is advantageous to dope liquid argon with molecules with an ionization potential lower than the energy of scintillation light. In the present work, the energy resolution for 5.305MeV alpha particles is examined, and the effect of allene added to liquid argon is investigated. Some preliminary results for 976 KeV electrons are also presented. Allene is purified by two methods: (a) small-quantity purification and (b) mass purification. Three methods are tried for mixing allene with argon. Results concerning the allene purification methods, effect of allene concentration, and allene-argon mixing methods are presented. Discussion is made of the collected charge and energy resolution. It is concluded that the addition of allene to liquid argon greatly improves the energy resolution of 5.305 MeV alpha particles. The best intrinsic resolution is 1.4 percent FWHM obtained for 4 ppm allene doped liquid argon. In the case of 976 KeV electron radiation, energy resolution is not improved by adding allene to liquid argon. The best resolution is 31 KeV FWHM obtaiend for 65ppm allene doped liquid argon. (N.K.)
-
Allene functionalization via bicyclic methylene aziridines.
Boralsky, Luke A; Marston, Dagmara; Grigg, R David; Hershberger, John C; Schomaker, Jennifer M
2011-04-15
The oxidative functionalization of olefins is a common method for the formation of vicinal carbon-heteroatom bonds. However, oxidative methods to transform allenes into synthetic motifs containing three contiguous carbon-heteroatom bonds are much less developed. This paper describes the use of bicyclic methylene aziridines (MAs), prepared via intramolecular allene aziridination, as scaffolds for functionalization of all three allene carbons. © 2011 American Chemical Society
-
Oxidative allene amination for the synthesis of azetidin-3-ones.
Burke, Eileen G; Schomaker, Jennifer M
2015-10-05
Regioselectivity in the aziridination of silyl-substituted homoallenic sulfamates is readily diverted to the distal double bond of the allene to yield endocyclic bicyclic methyleneaziridines with excellent stereocontrol. Subsequent reaction with electrophilic oxygen sources initiates facile rearrangement to densely functionalized, fused azetidin-3-ones in excellent d.r., effectively transferring the axial chirality of the allene to central chirality in the products. The steric nature of the silyl group dictates which of the two rings of the fused azetidin-3-one will undergo further functionalization, providing an additional element of diversity for the preparation of enantioenriched azetidine scaffolds with potential biological activity. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
-
Obituary: James Alfred Van Allen, 1914-2006
Ludwig, George H.; McIlwain, Carl Edwin
2006-12-01
James Alfred Van Allen, world-renowned space scientist, died 9 August 2006 at the age of ninety-one. He succumbed to heart failure after a ten-week period of declining health. Van Allen served for his entire sixty-seven-year professional career as an amazingly productive researcher, space science spokesman, inspired teacher, and valued colleague. The realization by him and his associates that charged particles are trapped by the Earth's magnetic field began a whole new field of research, magnetospheric physics. Following that initial discovery, he and his associates quickly extended their observations, first to the inner planets, and then to the rest of the planets and beyond. During his tenure at Iowa, he and his group flew instruments on more than sixty successful Earth satellites and planetary spacecraft, including the first missions to the planets Venus, Mars, Jupiter, Saturn, Uranus, and Neptune. Van Allen's lifetime publication list numbers more than 275, of which many are widely-cited, seminal papers. He was the sole author of more than 125 of those papers. Beyond the research laboratory, Van Allen worked energetically throughout his career in establishing space research as a new branch of human inquiry. He was among the most sought-after as a committee member and adviser, working at the highest levels of government, including the White House and Congress, and at all levels of the national and international research establishments. Many presentations in the non-scientific arena helped to bring the exciting discoveries and challenges of space research to the attention of the general public. James Van Allen (Van to his many friends and colleagues) was born on 7 September 1914 on a small farm near Mount Pleasant, Iowa, the second of four sons of Alfred Morris Van Allen and Alma Olney Van Allen. After high school in Mount Pleasant, he entered Iowa Wesleyan College, majoring in physics and graduating summa cum laude. While there, he was introduced to geophysics
-
OpenBook WordPress Plugin: Open Source Access to Bibliographic Data
Directory of Open Access Journals (Sweden)
John Miedema
2008-09-01
Full Text Available OpenBook is a WordPress PHP plugin that implements the Open Library APIs to insert book covers, titles, authors and publishers into web pages. The motive behind the development was to provide an easy alternative to the common practice of linking to Amazon. Open Library was selected as a data source because it is both open source and open data.The plugin is useful for book reviewers, library webmasters, anyone who wants to put book covers and data on their WordPress blog or website. The plugin also allows users to add links to publisher websites, a feature that was considered significant to independent publishers.
-
Direct transformation of silyl enol ethers into functionalized allenes.
Langer, P; Döring, M; Seyferth, D; Görls, H
2001-02-02
The first elimination reactions of silyl enol ethers to lithiated allenes are reported. These reactions allow a direct transformation of readily available silyl enol ethers into functionalized allenes. The action of three to four equivalents of lithium diisopropylamide (LDA) on silyl enol ethers results in the formation of lithiated allenes by initial allylic lithiation, subsequent elimination of a lithium silanolate, and finally, lithiation of the allene thus formed. Starting with amide-derived silyl imino ethers, lithiated ketenimines are obtained. A variety of reactions of the lithiated allenes with electrophiles (chlorosilanes, trimethylchlorostannane, dimethyl sulfate and ethanol) were carried out. Elimination of silanolate is observed only for substrates that contain the hindered SiMe2tBu or Si(iPr)3 moiety, but not for the SiMe3 group. The reaction of 1,1-dilithio-3,3-diphenylallene with ketones provides a convenient access to novel 1,1-di(hydroxymethyl)allenes which undergo a domino Nazarov-Friedel-Crafts reaction upon treatment with p-toluenesulfonic acid.
-
Substituent effects on dynamics at conical intersections: Allene and methyl allenes
Energy Technology Data Exchange (ETDEWEB)
Neville, Simon P. [Department of Chemistry, University of Ottawa, 10 Marie Curie, Ottawa, Ontario K1N 6N5 (Canada); Wang, Yanmei [State Key Laboratory of Magnetic Resonance and Atomic and Molecular Physics, Wuhan Institute of Physics and Mathematics, Chinese Academy of Sciences, Wuhan 430071 (China); Boguslavskiy, Andrey E.; Stolow, Albert, E-mail: albert.stolow@nrc-cnrc.gc.ca [Department of Chemistry, University of Ottawa, 10 Marie Curie, Ottawa, Ontario K1N 6N5 (Canada); National Research Council of Canada, 100 Sussex Drive, Ottawa, Ontario K1A 0R6 (Canada); Department of Physics, University of Ottawa, 150 Louis Pasteur, Ottawa ON K1N 6N5 (Canada); Schuurman, Michael S., E-mail: michael.schuurman@nrc-cnrc.gc.ca [Department of Chemistry, University of Ottawa, 10 Marie Curie, Ottawa, Ontario K1N 6N5 (Canada); National Research Council of Canada, 100 Sussex Drive, Ottawa, Ontario K1A 0R6 (Canada)
2016-01-07
We report a joint experimental and theoretical study on the ultrafast excited state dynamics of allene and a series of its methylated analogues (1,2-butadiene, 1,1-dimethylallene, and tetramethylallene) in order to elucidate the conical intersection mediated dynamics that give rise to ultrafast relaxation to the ground electronic state. We use femtosecond time-resolved photoelectron spectroscopy (TRPES) to probe the coupled electronic-vibrational dynamics following UV excitation at 200 nm (6.2 eV). Ab initio multiple spawning (AIMS) simulations are employed to determine the mechanistic details of two competing dynamical pathways to the ground electronic state. In all molecules, these pathways are found to involve as follows: (i) twisting about the central allenic C–C–C axis followed by pyramidalization at one of the terminal carbon atoms and (ii) bending of allene moiety. Importantly, the AIMS trajectory data were used for ab initio simulations of the TRPES, permitting direct comparison with experiment. For each molecule, the decay of the TRPES signal is characterized by short (30 fs, 52 fs, 23 fs) and long (1.8 ps, 3.5 ps, [306 fs, 18 ps]) time constants for 1,2-butadiene, 1,1-dimethylallene, and tetramethylallene, respectively. However, AIMS simulations show that these time constants are only loosely related to the evolution of electronic character and actually more closely correlate to large amplitude motions on the electronic excited state, modulating the instantaneous vertical ionization potentials. Furthermore, the fully substituted tetramethylallene is observed to undergo qualitatively different dynamics, as displacements involving the relatively massive methyl groups impede direct access to the conical intersections which give rise to the ultrafast relaxation dynamics observed in the other species. These results show that the branching between the “twisting” and “bending” pathways can be modified via the selective methylation of the terminal
-
Modular functionalization of allenes to aminated stereotriads.
Adams, Christopher S; Boralsky, Luke A; Guzei, Ilia A; Schomaker, Jennifer M
2012-07-04
Nitrogen-containing stereotriads, compounds with three adjacent stereodefined carbons, are commonly found in biologically important molecules. However, the preparation of molecules bearing these motifs can be challenging. Herein, we describe a modular oxidation protocol which converts a substituted allene to a triply functionalized amine of the form C-X/C-N/C-Y. The key step employs a Rh-catalyzed intramolecular conversion of the allene to a strained bicyclic methylene aziridine. This reactive intermediate is further elaborated to the target products, often in one reaction vessel and with effective transfer of the axial chirality of the allene to point chirality in the stereotriad.
-
Allene oxide synthase, allene oxide cyclase and jasmonic acid levels in Lotus japonicus nodules.
Directory of Open Access Journals (Sweden)
Anna Zdyb
Full Text Available Jasmonic acid (JA, its derivatives and its precursor cis-12-oxo phytodienoic acid (OPDA form a group of phytohormones, the jasmonates, representing signal molecules involved in plant stress responses, in the defense against pathogens as well as in development. Elevated levels of JA have been shown to play a role in arbuscular mycorrhiza and in the induction of nitrogen-fixing root nodules. In this study, the gene families of two committed enzymes of the JA biosynthetic pathway, allene oxide synthase (AOS and allene oxide cyclase (AOC, were characterized in the determinate nodule-forming model legume Lotus japonicus JA levels were to be analysed in the course of nodulation. Since in all L. japonicus organs examined, JA levels increased upon mechanical disturbance and wounding, an aeroponic culture system was established to allow for a quick harvest, followed by the analysis of JA levels in whole root and shoot systems. Nodulated plants were compared with non-nodulated plants grown on nitrate or ammonium as N source, respectively, over a five week-period. JA levels turned out to be more or less stable independently of the growth conditions. However, L. japonicus nodules formed on aeroponically grown plants often showed patches of cells with reduced bacteroid density, presumably a stress symptom. Immunolocalization using a heterologous antibody showed that the vascular systems of these nodules also seemed to contain less AOC protein than those of nodules of plants grown in perlite/vermiculite. Hence, aeroponically grown L. japonicus plants are likely to be habituated to stress which could have affected JA levels.
-
Precipitation of relativistic electrons of the Van Allen belts into the proton aurora
International Nuclear Information System (INIS)
Jordanova, Vania K.; Miyoshi, Y.; Sakaguchi, K.; Shiokawa, K.; Evans, D.S.; Albert, Jay; Connors, M
2008-01-01
The Van Allen electron belts consist of two regions encircling the earth in which relativistic electrons are trapped in the earth's magnetic field. Populations of relativistic electrons in the Van Allen belts vary greatly with geomagnetic disturbance and they are a major source of damage to space vehicles. In order to know when and by how much these populations of relativistic electrons increase, it is important to elucidate not only the cause of acceleration of relativistic electrons but also the cause of their loss from the Van Allen belts. Here we show the first evidence that left-hand polarized electromagnetic ion cyclotron (EMIC) plasma waves can cause the loss of relativistic electrons into the atmosphere, on the basis of results of an excellent set of ground and satellite observations showing coincident precipitation of ions with energies of tens of keV and of relativistic electrons into an isolated proton aurora. The proton aurora was produced by precipitation of ions with energies of tens of keV due to EMIC waves near the plasma pause, which is a manifestation of wave-particle interactions. These observations clarify that ions with energies of tens of keV affect the evolution of relativistic electrons in the Van Allen belts via parasitic resonance with EMIC waves, an effect that was first theoretically predicted in the early 1970's
-
James Van Allen The First Eight Billion Miles
Foerstner, Abigail
2009-01-01
Astrophysicist and space pioneer James Van Allen (1914-2006), for whom the Van Allen radiation belts were named, was among the principal scientific investigators for twenty-four space missions, including Explorer I in 1958, the first successful U.S. satellite; Mariner 2's 1962 flyby of Venus, the first successful mission to another planet; and the 1970's Pioneer 10 and Pioneer 11, missions that surveyed Jupiter and Saturn. Abigail Foerstner blends space science, drama, military agenda's, cold war politics, and the events of Van Allen's lengthy career to create the first biography of this highl
-
Diastereoselective Au-Catalyzed Allene Cycloisomerizations to Highly Substituted Cyclopentenes.
Reeves, Ryan D; Phelps, Alicia M; Raimbach, William A T; Schomaker, Jennifer M
2017-07-07
Site- and regiocontrolled Au-catalyzed allene carbocyclizations furnish highly substituted cyclopentenes in >1:1 dr. Significant substitution on the substrate is tolerated, with potential to install five contiguous stereocenters after alkene functionalization. Major challenges include identifying a Au/Cu catalyst that controls both the relative rates of allene epimerization/cyclization and the facial selectivity in addition of a metal enolate to the allene. Experiments to achieve stereodivergent cyclizations and transform key cyclopentenes into useful synthetic building blocks are described.
-
Allen Ginsberg kirjutab Ameerikast
2003-01-01
Arvustus: Ginsberg, Allen. Ameerika : valik luuletusi 1947-1996 / koostanud ja toimetanud Hasso Krull ; inglise keelest tõlkinud Contra, Lauri Kitsnik, Hasso Krull, Andres Langemets, Margit Langemets, Jürgen Rooste, Tõnu Õnnepalu. Tallinn : Perioodika, 2003
-
2011-06-22
... Executive Order 13045, Protection of Children from Environmental Health Risks and Safety Risks. This rule is not an economically significant rule and does not create an environmental risk to health or risk to...-AA00 Safety Zone; Waterway Closure, Morgan City-Port Allen Route From Mile Marker 0 to Port Allen Lock...
-
Singmaster, Karen A.; Pimentel, George C.
1989-03-01
Matrix studies of the photolytic reaction at 647 nm between allene and ozone were carried out at 12 K. Primary photoproducts include carbon monoxide, acrolein ( cis and trans), cyclopropanone, ketene, ethylene, allene oxide and formaldehyde. In Ar and Kr matrices both acrolein and cyclopropanone are produced in high yields, whereas in Xe matrices cyclopropanone is the major product. Infrared spectra for cyclopropanone and its oxygen-18 and deuterium substitutes are reported. The carbonyl stretch for cyclopropanone is observed at 1815 cm -1 in an Ar matrix. Also reported is the first synthesis of allene oxide. The carbon—carbon double bond stretch is observed at 1823.4 cm -1 and it exhibits a small oxygen-18 shift. The change in product distribution is discussed in terms of heavy atom spin—orbit enhancement of singlet—triplet excitation, so that in xenon reaction takes place on a triplet surface, whereas in argon it occurs on a singlet surface.
-
33 CFR 80.1440 - Port Allen, Kauai, HI.
2010-07-01
... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Port Allen, Kauai, HI. 80.1440 Section 80.1440 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Islands § 80.1440 Port Allen, Kauai, HI. A line drawn from...
-
2011-05-19
following doctrine, this monograph uses literary sources that embrace the variety of fields, branches, and theories that holistic thinking requires...Valerie Ahl and T.F.H. Allen, Hierarchy Theory : A Vision, Vocabulary, and Epistemology , (New York: Columbia University Press, 1996) 18. “Meaning, and...faulty 35 Valerie Ahl and T.F.H. Allen, Hierarchy Theory : A Vision, Vocabulary, and Epistemology , (New York: Columbia University Press, 1996) 1
-
Chemoselective allene aziridination via Ag(I) catalysis.
Rigoli, Jared W; Weatherly, Cale D; Vo, Brian T; Neale, Samuel; Meis, Alan R; Schomaker, Jennifer M
2013-01-18
Allene aziridination generates useful bicyclic methylene aziridine scaffolds that can be flexibly transformed into a range of stereochemically complex and densely functionalized amine-containing stereotriads. The scope of this chemistry has been limited by the poor chemoselectivity that often results when typical dinuclear Rh(II) catalysts are employed with homoallenic carbamates. Herein, Ag(I) catalysts that significantly improve the scope and yield of bicyclic methylene aziridines that can be prepared via allene aziridination are described.
-
Interview of David Elliston Allen
Allen, David
2009-01-01
Interviewed on 12 April 1983 by Jack Goody and Alan Macfarlane and filmed and edited by Sarah Harrison. Made on old and low quality equipment. An interview of the historian and naturalist David Elliston Allen
-
Transitional behavior of different energy protons based on Van Allen Probes observations
International Nuclear Information System (INIS)
Yue, Chao; Bortnik, Jacob; Chen, Lunjin; Ma, Qianli
2016-01-01
Understanding the dynamical behavior of ~1 eV to 50 keV ions and identifying the energies at which the morphologies transit are important in that they involve the relative intensities and distributions of the large-scale electric and magnetic fields, the outflow, and recombination rates. However, there have been only few direct observational investigations of the transition in drift behaviors of different energy ions before the Van Allen Probes era. In this paper, we statistically analyze ~1 eV to 50 keV hydrogen (H + ) differential flux distributions near geomagnetic equator by using Van Allen Probes observations to investigate the H + dynamics under the regulation of large-scale electric and magnetic fields. Our survey clearly indicates three types of H + behaviors within different energy ranges, which is consistent with previous theory predictions. Finally, using simple electric and magnetic field models in UBK coordinates, we have further constrained the source regions of different energy ions and their drift directions.
-
Woody Allen, serial schlemiel ?
Directory of Open Access Journals (Sweden)
Frédérique Brisset
2011-04-01
Full Text Available Woody Allen a développé au fil des années une persona cinématographique de schlemiel new-yorkais aisément reconnaissable par le spectateur. Elle marque nombre de ses films, qu’il y apparaisse en tant qu’acteur ou y dirige des substituts comédiens comme déclinaisons de lui-même. Si cette figure prototypique est le fondement de la sérialité dans sa filmographie, il est des traits stylistiques qui en portent trace tout au long de son œuvre : la récurrence annuelle de ses réalisations, la signature formelle symbolisée par ses génériques à la typographie singulière, le rythme de ses dialogues ponctués d’interjections et l’usage de l’autocitation sont autant de procédés qui marquent son cinéma d’un sceau très personnel. Ils fonctionnent comme des clins d’œil au spectateur qui reçoit dès lors LE Woody Allen millésimé comme une invitation à retrouver son microcosme. Ainsi la sérialité se pose comme à la fois initiale et conséquentielle de son système filmique, processus de création unique dans le cinéma américain.Woody Allen has long constructed a cinematographic persona of schlemiel New- Yorker that the audience can easily identify. It impacts most of his films, whether he stars in them or directs “substitute” actors to impersonate his character. If this prototypical figure is the basis of seriality in his cinematography, serial stylistic features can also be found all along his career: the annual recurrence of his productions, the formal signature symbolised by the typography of his singular credit titles, his rhythmical interjection-punctuated dialogues and the use of self-quotation imprint a very personal seal upon his movies. They all work as a recognition signals for the audience who thus receive THE Woody Allen vintage as an invitation to re-enter his microcosm. Seriality is then both initial and consequential to his cinematographic system, a unique creative process in American film history.
-
Photochemical generation and 1H NMR detection of alkyl allene oxides in solution
International Nuclear Information System (INIS)
Breen, L.E.; Schepp, N.P.; Tan, C.-H.E.
2005-01-01
Irradiation of substituted 5-alkyl-4,5-epoxyvalerophenones leads to the formation of alkyl allene oxides that, in some cases, are sufficiently long-lived to be detected at room temperature by 1 H NMR spectroscopy. Absolute lifetime measurements show that the size of the alkyl group has a significant influence on the reactivity of the allene oxide, with tert-butyl allene oxide having a lifetime of 24 h in CD 3 CN at room temperature that is considerably longer than the 1.5 h lifetime of the ethyl allene oxide. The allene oxides react rapidly with water to give α-hydroxyketones. The mechanism involves nucleophilic attack to the epoxide carbon to give an enol, which can also be detected as an intermediate by 1 H NMR spectroscopy. (author)
-
Astronauts Allen and Gemar during extravehicular activity (EVA) training in CCT
1994-01-01
Astronauts Charles D. (Sam) Gemar, and Andrew M. Allen participate in a training exercise at JSC's Crew Compartment Trainer (CCT), located in the Space Vehicle Mockup Facility. Gemar sits inside the airlock as Allen reviews procedures for EVA.
-
VizieR Online Data Catalog: Extinction law in the Cep OB3b young cluster (Allen+, 2014)
Allen, T. S.; Prchlik, J. J.; Megeath, S. T.; Gutermuth, R. A.; Pipher, J. L.; Naylor, T.; Jeffries, R. D.
2017-06-01
We use Johnson V and Cousins Rc (hereafter called VR) band phot from the Isaac Newton Telescope (INT), compiled in the catalog of Littlefair et al. (2010, J/MNRAS/403/545). The R-band photometry was obtained using the Sloan r filter. It was calibrated against photometric standard stars measured in the Cousins Rc filter with an arbitrary zero point. Moderate resolution ((λ/Δλ)~1000-2000, FWHM resolution of about 6 Å) optical spectra (covering 4000-9000 Å) were obtained for ~1700 sources toward Cep OB3b using the multi-fiber spectrograph Hectospec on the MMT telescope. About 600 sources were selected for observation because they were determined to be possible cluster members (Allen et al. 2012, J/ApJ/750/125), based on indicators of youth, such as IR emission due to circumstellar dusty material and heightened X-ray activity. We use an extinction map from Allen et al. (2012, J/ApJ/750/125) to initially estimate the extinction toward each source. This map is derived using the 2MASS Point Source Catalog (Skrutskie et al. 2006AJ....131.1163S, Cat. VII/233) H and Ks band photometry of background stars. (1 data file).
-
Burch, James
2014-01-01
This collection of articles provides broad and detailed information about NASA’s Van Allen Probes (formerly known as the Radiation Belt Storm Probes) twin-spacecraft Earth-orbiting mission. The mission has the objective of achieving predictive understanding of the dynamic, intense, energetic, dangerous, and presently unpredictable belts of energetic particles that are magnetically trapped in Earth’s space environment above the atmosphere. It documents the science of the radiation belts and the societal benefits of achieving predictive understanding. Detailed information is provided about the Van Allen Probes mission design, the spacecraft, the science investigations, and the onboard instrumentation that must all work together to make unprecedented measurements within a most unforgiving environment, the core of Earth’s most intense radiation regions. This volume is aimed at graduate students and researchers active in space science, solar-terrestrial interactions and studies of the up...
-
Frances Allen Wins Turing Award
Indian Academy of Sciences (India)
Home; Journals; Resonance – Journal of Science Education; Volume 12; Issue 8. Frances Allen Wins Turing Award. Priti Shankar. Article-in-a-Box Volume 12 Issue 8 August 2007 pp ... Author Affiliations. Priti Shankar1. Department of Computer Science and Automation, Indian Institute of Science, Bangalore 560 012, India ...
-
Offices Press as the Main Source Documentary of the Media. Fuenlabrada as Case Study
Directory of Open Access Journals (Sweden)
Beatriz Catalina García
2015-07-01
Full Text Available The routines documentaries of professionals working in the press offices of any public or private entity have changed extraordinarily with adaptation of the tools available on the Internet. These alterations have dramatically impacted the provision of information to various media: the generated files in the cabinet, mostly press releases, are submitted in online format. In this article are analyze the relation among local media and press office of the City of Fuenlabrada. Through monitoring and content analysis of the news published in local media, this paper therefore seeks to ascertain the acceptance or rejection of the information generated by this institution and proposals for publication in different media. As a complementary purpose and by means of a structured questionnaire, are analyzed the relations between local journalists and the press office professionals. Among the most important findings, is observed a clear trend to consider the city hall as their main source of information with a remarkable adoption of institutional information on the content of the different media.
-
Directory of Open Access Journals (Sweden)
Peter Eubanks
2015-06-01
Full Text Available Abstract: Woody Allen´s recent "Midnight in Paris" describes a Paris that has as many identities as there are observers to ascribe them. Indeed, there is no one, true Paris that everyone objectively shares; Paris, in Allen´s film, exists only in the phenomenology of the observers perception, a perception often marred and made unreliable by an escapist need to withdraw from the present in order to take shelter in a glorified, utopian past. Allen thus criticizes the nostalgic impulse, the "Golden-Age thinking" (as it is called in the film that forces various characters simultaneously to inhabit two worlds, that of a prelapsarian past and that of the fallen present. His protagonist´s journey back and forth between the present and the idealized Roaring Twenties is everyman´s journey, the sometimes surreal voyage between reality and imagination, between the world actually inhabited and the world artificially constructed for oneself. Yet it is when Allen´s protagonist finally discovers nostalgia within his nostalgia, a longing within his longing, that he recognizes the flawed thinking behind his almost mythologized perception of the past, reflecting everyman´s realization that the past is ultimately the expression of our present needs.Resumen: Uno de los films recientes de Woody Allen, "Midnight in Paris", describe un París que tiene tantas identidades como observadores hay a quienes atribuirlos. De hecho, no hay un París auténtico que compartan todos. París, en el film de Allen, solo existe en la fenomenología de la percepción del observador, una percepción con frecuencia dañada/arruinada y realizada poco fidedigna por una necesidad escapista a retirarse del presente para refugiarse en un pasado glorificado, utópico. Así Allen critica el impulso nostálgico, la idea del "pensamiento del siglo de oro" (tal y como viene a ser llamado en el film que obliga a que varios personajes residan en dos mundos al mismo tiempo: el de un mundo
-
Global solution branches for a nonlocal Allen-Cahn equation
Kuto, Kousuke; Mori, Tatsuki; Tsujikawa, Tohru; Yotsutani, Shoji
2018-05-01
We consider the Neumann problem of a 1D stationary Allen-Cahn equation with nonlocal term. Our previous paper [4] obtained a local branch of asymmetric solutions which bifurcates from a point on the branch of odd-symmetric solutions. This paper derives the global behavior of the branch of asymmetric solutions, and moreover, determines the set of all solutions to the nonlocal Allen-Cahn equation. Our proof is based on a level set analysis for an integral map associated with the nonlocal term.
-
The Brosimum allene: a structural revision.
Hu, Gaojie; Liu, Kai; Williams, Lawrence J
2008-12-04
Insight derived from a synthetic model, calculated (13)C NMR data, and comparison to experimental data indicate that the proposed allenic structure A, originally assigned to an isolate from Brosimum acutifolium Huber, should be revised to B, a natural product and nonallenic substance, mururin C.
-
Q & A with Ed Tech Leaders: Interview with Michael W. Allen
Shaughnessy, Michael F.
2014-01-01
Michael W. Allen, the Chairman and CEO of Allen Interactions, is an architect of interactive multimedia learning and is recognized for his many insights, inventions, and presentations. With over 50 years of experience in e-learning, both in academic and corporate settings, he is known for his role in creating Authorware and overseeing the work of…
-
Brazell, Aaron
2011-01-01
Get the latest word on the biggest self-hosted blogging tool on the marketWithin a week of the announcement of WordPress 3.0, it had been downloaded over a million times. Now you can get on the bandwagon of this popular open-source blogging tool with WordPress Bible, 2nd Edition. Whether you're a casual blogger or programming pro, this comprehensive guide covers the latest version of WordPress, from the basics through advanced application development. If you want to thoroughly learn WordPress, this is the book you need to succeed.Explores the principles of blogging, marketing, and social media
-
News Authorship and News Sources: Impacts on Environmental Coverage in The Nigerian Press
Directory of Open Access Journals (Sweden)
Ogadimma C. Emenyeonu
2017-07-01
Full Text Available This study examines the impacts of news authorship and news sources on environmental coverage in the Nigerian press to shed light on the roles they play in news construction. The study finds that journalists in conjunction with policy makers are the catalyst for environmental information, whereas citizens who are pivotal in creating relevant public opinion on environmental issues are left behind. The study reveals that investigative reporting lacks in environmental coverage because most coverage are events driven which explains why environmental news is reported as straight news and as such journalists rely heavily on official sources rather than subsidiary sources. The study opines that for proper environmental coverage, journalists must choose sources from both main and subsidiary actors and revert to proactive, investigative and interpretive reporting so as to make environmental stories relatable to the intended audiences.
-
Avila, Javier; Sostmann, Kai; Breckwoldt, Jan; Peters, Harm
2016-06-03
Electronic portfolios (ePortfolios) are used to document and support learning activities. E-portfolios with mobile capabilities allow even more flexibility. However, the development or acquisition of ePortfolio software is often costly, and at the same time, commercially available systems may not sufficiently fit the institution's needs. The aim of this study was to design and evaluate an ePortfolio system with mobile capabilities using a commercially free and open source software solution. We created an online ePortfolio environment using the blogging software WordPress based on reported capability features of such software by a qualitative weight and sum method. Technical implementation and usability were evaluated by 25 medical students during their clinical training by quantitative and qualitative means using online questionnaires and focus groups. The WordPress ePortfolio environment allowed students a broad spectrum of activities - often documented via mobile devices - like collection of multimedia evidences, posting reflections, messaging, web publishing, ePortfolio searches, collaborative learning, knowledge management in a content management system including a wiki and RSS feeds, and the use of aid tools for studying. The students' experience with WordPress revealed a few technical problems, and this report provides workarounds. The WordPress ePortfolio was rated positively by the students as a content management system (67 % of the students), for exchange with other students (74 %), as a note pad for reflections (53 %) and for its potential as an information source for assessment (48 %) and exchange with a mentor (68 %). On the negative side, 74 % of the students in this pilot study did not find it easy to get started with the system, and 63 % rated the ePortfolio as not being user-friendly. Qualitative analysis indicated a need for more introductory information and training. It is possible to build an advanced ePortfolio system with mobile
-
Rejuvenating Allen's Arc with the Geometric Mean.
Phillips, William A.
1994-01-01
Contends that, despite ongoing criticism, Allen's arc elasticity formula remains entrenched in the microeconomics principles curriculum. Reviews the evolution and continuing scrutiny of the formula. Argues that the use of the geometric mean offers pedagogical advantages over the traditional arithmetic mean approach. (CFR)
-
Isomer-specific combustion chemistry in allene and propyne flames
Energy Technology Data Exchange (ETDEWEB)
Hansen, Nils; Miller, James A. [Combustion Research Facility, Sandia National Laboratories, Livermore, CA 94551 (United States); Westmoreland, Phillip R. [Department of Chem. Engineering, University of Massachusetts, Amherst, MA 01003 (United States); Kasper, Tina [Combustion Research Facility, Sandia National Laboratories, Livermore, CA 94551 (United States); Department of Chemistry, Bielefeld University, D-33615 Bielefeld (Germany); Kohse-Hoeinghaus, Katharina [Department of Chemistry, Bielefeld University, D-33615 Bielefeld (Germany); Wang, Juan; Cool, Terrill A. [School of Applied and Engineering Physics, Cornell University, Ithaca, NY 14853 (United States)
2009-11-15
A combined experimental and modeling study is performed to clarify the isomer-specific combustion chemistry in flames fueled by the C{sub 3}H{sub 4} isomers allene and propyne. To this end, mole fraction profiles of several flame species in stoichiometric allene (propyne)/O{sub 2}/Ar flames are analyzed by means of a chemical kinetic model. The premixed flames are stabilized on a flat-flame burner under a reduced pressure of 25 Torr (=33.3 mbar). Quantitative species profiles are determined by flame-sampling molecular-beam mass spectrometry, and the isomer-specific flame compositions are unraveled by employing photoionization with tunable vacuum-ultraviolet synchrotron radiation. The temperature profiles are measured by OH laser-induced fluorescence. Experimental and modeled mole fraction profiles of selected flame species are discussed with respect to the isomer-specific combustion chemistry in both flames. The emphasis is put on main reaction pathways of fuel consumption, of allene and propyne isomerization, and of isomer-specific formation of C{sub 6} aromatic species. The present model includes the latest theoretical rate coefficients for reactions on a C{sub 3}H{sub 5} potential [J.A. Miller, J.P. Senosiain, S.J. Klippenstein, Y. Georgievskii, J. Phys. Chem. A 112 (2008) 9429-9438] and for the propargyl recombination reactions [Y. Georgievskii, S.J. Klippenstein, J.A. Miller, Phys. Chem. Chem. Phys. 9 (2007) 4259-4268]. Larger peak mole fractions of propargyl, allyl, and benzene are observed in the allene flame than in the propyne flame. In these flames virtually all of the benzene is formed by the propargyl recombination reaction. (author)
-
Crimes e pecados: Woody Allen, Hollywood e o cinema independente
Soares, Marcos; Anjos, Ana Paula B.; Fabris, Marcos
2012-01-01
In this essay we propose an analysis of the film Crimes and Misdemeanors (1989) by Woody Allen in an attempt to focus on its reflections both on the American independent movie production in the 80’s as well as on the conditions of possibility of Allen’s career. Este ensaio traz uma análise do filme Crimes e Pecados (1989) do cineasta Woody Allen que enfatiza suas reflexões tanto sobre a situação do cinema independente no final dos anos 80 nos Estados...
-
Puganen, Anna; Kallio, Heikki P; Schaich, Karen M; Suomela, Jukka-Pekka; Yang, Baoru
2018-04-04
The potential for using extracts of press residues from black, green, red, and white currants and from sea buckthorn berries as sources of antioxidants for foods use was investigated. Press residues were extracted with ethanol in four consecutive extractions, and total Folin-Ciocalteu (F-C) reactive material and authentic phenolic compounds were determined. Radical quenching capability and mechanisms were determined from total peroxyl radical-trapping antioxidant capacity (TRAP) and oxygen radical absorbance capacity (ORAC) assays and from diphenylpicrylhydrazyl (DPPH) kinetics, respectively; specific activities were normalized to F-C reactive concentrations. Levels of total F-C reactive materials in press residue extracts were higher than in many fruits and showed significant radical quenching activity. Black currant had the highest authentic phenol content and ORAC, TRAP, and DPPH reactivity. Sea buckthorn grown in northern Finland showed extremely high total specific DPPH reactivity. These results suggest that berry press residues offer attractive value-added products that can provide antioxidants for use in stabilizing and fortifying foods.
-
International Nuclear Information System (INIS)
Zulfiqar, A.; Toori, K. U.; Khan, S. S.; Hamza, M. I. M.; Zaman, S. U.
2006-01-01
A consecutive series of 103 patients, 58% male with mean age of 62 year (range 40-75 years), admitted with supratentorial stroke in our teaching hospital were studied. All patients had Computer Tomography scan brain done after clinical evaluation and application of Allen stroke score. Computer Tomography Scan confirmed thrombotic stroke in 55 (53%) patients and haemorrhagic stroke in 48 (47%) patients. Out of the 55 patients with definitive thrombotic stroke on Computer Tomography Scan, Allen stroke score suggested infarction in 67%, haemorrhage in 6% and remained inconclusive in 27% of cases. In 48 patients with definitive haemorrhagic stroke on Computer Tomography Scan, Allen stroke score suggested haemorrhage in 60%, infarction in 11% and remained inconclusive in 29% of cases. The overall accuracy of Allen stroke score was 66%. (author)
-
Directory of Open Access Journals (Sweden)
Roberto Yukio Ikemoto
2010-01-01
Full Text Available OBJETIVO: O objetivo do trabalho foi comparar a resistência entre os pontos simples, duplo e Mason-Allen modificado, utilizados para o reparo do manguito rotador, e verificar se há diferença significativa que justifique a utilização do ponto do tipo Mason-Allen modificado ao invés dos pontos simples ou duplo. MÉTODO: Retiramos tendões do músculo supra-espinal de 15 cadáveres humanos frescos (30 ombros, com a média de idade de 45 anos. Os testes foram realizados na máquina universal de ensaio mecânico Kratos® 500/2000 e os resultados submetidos aos testes estatísticos de t-student, análise de variância (ANOVA, comparação múltipla de Bonferroni e calculadas as correlações de Pearson. Os testes foram realizados ao nível de significância de 5%. RESULTADOS: Não houve diferença significativa com relação à idade, ao tamanho das amostras e deslocamento do tendão. A resistência variou com média de 127,50 N com o ponto simples, 163,95 N com o duplo e com o ponto de Mason-Allen modificado esta foi de 198,45 N. CONCLUSÃO: não existe diferença da resistência no tendão quanto à falha na interface sutura - tendão comparando-se o ponto duplo com o Mason-Allen modificado e os pontos simples e duplo, porém há diferença quando comparados os pontos simples e Mason-Allen modificado.OBJECTIVE: The purpose of this study was to compare the rotator cuff tendon resistance at the interface tendon-suture using three different sorts of stitches (simple, mattress and modified Mason-Allen. METHODS: To do this, 30 rotator cuffs were totally dissected from 15 specimens, which were 45 years old on average. The tests were done using a Kratos® 500/2000 machine and the statistical analyses applied were the Student t-test, ANOVA test, Multiple Bonferroni Comparison, and Pearson's correlation coefficients; all the analyses used a significance level of 5%. RESULTS: No significant difference was observed regarding the age, sample sizes and
-
Genetic diversity and structure in the Endangered Allen Cays Rock Iguana, Cyclura cychlura inornata
Aplasca, Andrea C.; Iverson, John B.; Welch, Mark E.; Colosimo, Giuliano
2016-01-01
The Endangered Allen Cays Rock Iguana (Cyclura cychlura inornata) is endemic to the Allen Cays, a tiny cluster of islands in the Bahamas. Naturally occurring populations exist on only two cays (<4 ha each). However, populations of unknown origin were recently discovered on four additional cays. To investigate patterns of genetic variation among these populations, we analyzed nuclear and mitochondrial markers for 268 individuals. Analysis of three mitochondrial gene regions (2,328 bp) and data for eight nuclear microsatellite loci indicated low genetic diversity overall. Estimates of effective population sizes based on multilocus genotypes were also extremely low. Despite low diversity, significant population structuring and variation in genetic diversity measures were detected among cays. Genetic data confirm the source population for an experimentally translocated population while raising concerns regarding other, unauthorized, translocations. Reduced heterozygosity is consistent with a documented historical population decline due to overharvest. This study provides the first range-wide genetic analysis of this subspecies. We suggest strategies to maximize genetic diversity during ongoing recovery including additional translocations to establish assurance populations and additional protective measures for the two remaining natural populations. PMID:26989628
-
Genetic diversity and structure in the Endangered Allen Cays Rock Iguana, Cyclura cychlura inornata
Directory of Open Access Journals (Sweden)
Andrea C. Aplasca
2016-03-01
Full Text Available The Endangered Allen Cays Rock Iguana (Cyclura cychlura inornata is endemic to the Allen Cays, a tiny cluster of islands in the Bahamas. Naturally occurring populations exist on only two cays (<4 ha each. However, populations of unknown origin were recently discovered on four additional cays. To investigate patterns of genetic variation among these populations, we analyzed nuclear and mitochondrial markers for 268 individuals. Analysis of three mitochondrial gene regions (2,328 bp and data for eight nuclear microsatellite loci indicated low genetic diversity overall. Estimates of effective population sizes based on multilocus genotypes were also extremely low. Despite low diversity, significant population structuring and variation in genetic diversity measures were detected among cays. Genetic data confirm the source population for an experimentally translocated population while raising concerns regarding other, unauthorized, translocations. Reduced heterozygosity is consistent with a documented historical population decline due to overharvest. This study provides the first range-wide genetic analysis of this subspecies. We suggest strategies to maximize genetic diversity during ongoing recovery including additional translocations to establish assurance populations and additional protective measures for the two remaining natural populations.
-
Butler, L.; Turney, D.; Matiella Novak, A.; Smith, D.; Simon, M.
2013-12-01
How's the weather in space? Why on Earth did NASA send two satellites above Earth to study radiation belts and space weather? To learn the answer to questions about NASA's Van Allen Probes mission, 450 students and their teachers from Maryland middle schools attended Space Academy events highlighting the Van Allen Probes mission. Sponsored by the Applied Physics Laboratory (APL) and Discovery Education, the events are held at the APL campus in Laurel, MD. Space Academies take students and teachers on behind-the-scenes exploration of how spacecraft are built, what they are designed to study, and introduces them to the many professionals that work together to create some of NASA's most exciting projects. Moderated by a public relations representative in the format of an official NASA press conference, the daylong event includes a student press conference with students as reporters and mission experts as panelists. Lunch with mission team members gives students a chance to ask more questions. After lunch, students don souvenir clean room suits, enjoy interactive science demonstrations, and tour APL facilities where the Van Allen Probes were built and tested before launch. Students may even have an opportunity to peek inside a clean room to view spacecraft being assembled. Prior to the event, teachers are provided with classroom activities, lesson plans, and videos developed by APL and Discovery Education to help prepare students for the featured mission. The activities are aligned to National Science Education Standards and appropriate for use in the classroom. Following their visit, student journalists are encouraged to write a short article about their field trip; selections are posted on the Space Academy web site. Designed to engage, inspire, and influence attitudes about space science and STEM careers, Space Academies provide an opportunity to attract underserved populations and emphasize that space science is for everyone. Exposing students to a diverse group of
-
Gerstner, Nels C; Adams, Christopher S; Grigg, R David; Tretbar, Maik; Rigoli, Jared W; Schomaker, Jennifer M
2016-01-15
Oxidative allene amination provides rapid access to densely functionalized amine-containing stereotriads through highly reactive bicyclic methyleneaziridine intermediates. This strategy has been demonstrated as a viable approach for the construction of the densely functionalized aminocyclitol core of jogyamycin, a natural product with potent antiprotozoal activity. Importantly, the flexibility of oxidative allene amination will enable the syntheses of modified aminocyclitol analogues of the jogyamycin core.
-
Mann, I. R.; Ozeke, L.; Murphy, K. R.; Claudepierre, S. G.; Rae, J.; Milling, D. K.; Kale, A.; Baker, D. N.
2017-12-01
The NASA Van Allen Probes have opened a new window on the dynamics of ultra-relativistic electrons in the Van Allen radiation belts. Under different solar wind forcing the outer belt is seen to respond in a variety of apparently diverse and sometimes remarkable ways. For example, sometimes a third radiation belt is carved out (e.g., September 2012), or the belts can remain depleted for 10 days or more (September 2014). More usually there is a sequential response of a strong and sometimes rapid depletion followed by a re-energization, the latter increasing outer belt electron flux by orders of magnitude on hour timescales during some of the strongest storms of this solar cycle (e.g., March 2013, March 2015). Such dynamics also appear to be often bounded at low-L by an apparently impenetrable barrier at L 2.8 through which ultra-relativistic electrons do not penetrate. Many studies in the Van Allen Probes era have sought explanations for these apparently diverse features, often incorporating the effects from multiple plasma waves. In contrast, we show how this apparently diverse behaviour can instead be explained by one dominant process: ULF wave radial transport. Once ULF wave transport rates are accurately specified by observations, and coupled to the dynamical variation of the outer boundary condition at the edge of the outer belt, the observed diverse responses can all be explained. However, in order to get good agreement with observations, the modeling reveals the importance of still currently unexplained very fast loss in the main phase which results in an almost total extinction of the belts and decouples pre- and post-storm ultra-relativistic electron flux on hour timescales. Similarly, varying plasmasheet source populations are seen to be of critical importance such that near-tail dynamics play a crucial role in Van Allen belt dynamics. Nonetheless, simple models incorporating accurate transport rates derived directly from ULF wave measurements are shown to
-
Automated Identification and Shape Analysis of Chorus Elements in the Van Allen Radiation Belts
Sen Gupta, Ananya; Kletzing, Craig; Howk, Robin; Kurth, William; Matheny, Morgan
2017-12-01
An important goal of the Van Allen Probes mission is to understand wave-particle interaction by chorus emissions in terrestrial Van Allen radiation belts. To test models, statistical characterization of chorus properties, such as amplitude variation and sweep rates, is an important scientific goal. The Electric and Magnetic Field Instrument Suite and Integrated Science (EMFISIS) instrumentation suite provides measurements of wave electric and magnetic fields as well as DC magnetic fields for the Van Allen Probes mission. However, manual inspection across terabytes of EMFISIS data is not feasible and as such introduces human confirmation bias. We present signal processing techniques for automated identification, shape analysis, and sweep rate characterization of high-amplitude whistler-mode chorus elements in the Van Allen radiation belts. Specifically, we develop signal processing techniques based on the radon transform that disambiguate chorus elements with a dominant sweep rate against hiss-like chorus. We present representative results validating our techniques and also provide statistical characterization of detected chorus elements across a case study of a 6 s epoch.
-
Sutherland, Daniel R; Kinsman, Luke; Angiolini, Stuart M; Rosair, Georgina M; Lee, Ai-Lan
2018-05-11
Hydroarylation of enantioenriched 1,3-disubstituted allenes has the potential to proceed with axial-to-point chirality transfer to yield enantioenriched allylated (hetero)aryl compounds. However, the gold-catalysed intermolecular reaction was previously reported to occur with no chirality transfer owing to competing allene racemisation. Herein, we describe the development of the first intermolecular hydroarylations of allenes to proceed with efficient chirality transfer and summarise some of the key criteria for achieving high regio- and stereoselectivity. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
-
Sooman, Linda; Wennman, Anneli; Hamberg, Mats; Hoffmann, Inga; Oliw, Ernst H
2016-02-01
The genome of Aspergillus niger codes for a fusion protein (EHA25900), which can be aligned with ~50% sequence identity to 9S-dioxygenase (DOX)-allene oxide synthase (AOS) of Fusarium oxysporum, homologues of the Fusarium and Colletotrichum complexes and with over 62% sequence identity to homologues of Aspergilli, including (DOX)-9R-AOS of Aspergillus terreus. The aims were to characterize the enzymatic activities of EHA25900 and to identify crucial amino acids for the stereospecificity. Recombinant EHA25900 oxidized 18:2n-6 sequentially to 9R-hydroperoxy-10(E),12(Z)-octadecadienoic acid (9R-HPODE) and to a 9R(10)-allene oxide. 9S- and 9R-DOX-AOS catalyze abstraction of the pro-R hydrogen at C-11, but the direction of oxygen insertion differs. A comparison between twelve 9-DOX domains of 9S- and 9R-DOX-AOS revealed conserved amino acid differences, which could contribute to the chirality of products. The Gly616Ile replacement of 9R-DOX-AOS (A. niger) increased the biosynthesis of 9S-HPODE and the 9S(10)-allene oxide, whereas the Phe627Leu replacement led to biosynthesis of 9S-HPODE and the 9S(10)-allene oxide as main products. The double mutant (Gly616Ile, Phe627Leu) formed over 90% of the 9S stereoisomer of HPODE. 9S-HPODE was formed by antarafacial hydrogen abstraction and oxygen insertion, i.e., the original H-abstraction was retained but the product chirality was altered. We conclude that 9R-DOX-AOS can be altered to 9S-DOX-AOS by replacement of two amino acids (Gly616Ile, Phe627Leu) in the DOX domain. Copyright © 2015 Elsevier B.V. All rights reserved.
-
Allen's astrophysical quantities
2000-01-01
This new, fourth, edition of Allen's classic Astrophysical Quantities belongs on every astronomer's bookshelf. It has been thoroughly revised and brought up to date by a team of more than ninety internationally renowned astronomers and astrophysicists. While it follows the basic format of the original, this indispensable reference has grown to more than twice the size of the earlier editions to accommodate the great strides made in astronomy and astrophysics. It includes detailed tables of the most recent data on: - General constants and units - Atoms, molecules, and spectra - Observational astronomy at all wavelengths from radio to gamma-rays, and neutrinos - Planetary astronomy: Earth, planets and satellites, and solar system small bodies - The Sun, normal stars, and stars with special characteristics - Stellar populations - Cataclysmic and symbiotic variables, supernovae - Theoretical stellar evolution - Circumstellar and interstellar material - Star clusters, galaxies, quasars, and active galactic nuclei ...
-
Automatic control model of water filling system with Allen Bradley Micrologix 1400 PLC
Harahap, R.; Adyatma, AF; Fahmi, F.
2018-02-01
Programmable Logic Controller or PLC today plays an important role in most industrial control systems. PLC usage can be encountered in almost all fields of industry, not only in the manufacturing world but also on many other things such as elevators in office buildings, hotels hospitals, and others. PLC is an electronic control tool that operates in logic that its programming can be modified with relative ease. As with any controller in general, the PLC processes input signals to further discharge output according to the desired program. PLC usage is very broad because of its high reliability, can be reprogrammed or modified with relative ease, and very helpful in the tracking troubleshooting. One type of existing PLC is Allen Bradley PLC. Allen Bradley PLC program is commonly used in various industries. PLC Allen Bradley (AB) has several types, and one of them is the type of Micrologic 1400. In this study we design a system as a comparison with the conventional system. For that to explore the use of a PLC program which will be supported by a simulator tool, including a program to RSLogic 500, how to programming, monitoring via RSView32, and modification. It is expected to understand the application aspect of operation and programming of this specific PLC and its potential. The purpose of this research is to design water filling automation system by using Allen Bradley Micrologic 1400 type 1766-L32BXB PLC, empowering the use of Allen Bradley Micrologic 1400 PLC and to regulate the desired process to obtain efficiency and effectiveness compared with conventional system arrangement using Relay.
-
James Van Allen and His Namesake NASA Mission
Baker, D. N.; Hoxie, V. C.; Jaynes, A.; Kale, A.; Kanekal, S. G.; Li, X.; Reeves, G. D.; Spence, H. E.
2013-12-01
In many ways, James A. Van Allen defined and "invented" modern space research. His example showed the way for government-university partners to pursue basic research that also served important national and international goals. He was a tireless advocate for space exploration and for the role of space science in the spectrum of national priorities.
-
Neuroinformatics of the Allen Mouse Brain Connectivity Atlas.
Kuan, Leonard; Li, Yang; Lau, Chris; Feng, David; Bernard, Amy; Sunkin, Susan M; Zeng, Hongkui; Dang, Chinh; Hawrylycz, Michael; Ng, Lydia
2015-02-01
The Allen Mouse Brain Connectivity Atlas is a mesoscale whole brain axonal projection atlas of the C57Bl/6J mouse brain. Anatomical trajectories throughout the brain were mapped into a common 3D space using a standardized platform to generate a comprehensive and quantitative database of inter-areal and cell-type-specific projections. This connectivity atlas has several desirable features, including brain-wide coverage, validated and versatile experimental techniques, a single standardized data format, a quantifiable and integrated neuroinformatics resource, and an open-access public online database (http://connectivity.brain-map.org/). Meaningful informatics data quantification and comparison is key to effective use and interpretation of connectome data. This relies on successful definition of a high fidelity atlas template and framework, mapping precision of raw data sets into the 3D reference framework, accurate signal detection and quantitative connection strength algorithms, and effective presentation in an integrated online application. Here we describe key informatics pipeline steps in the creation of the Allen Mouse Brain Connectivity Atlas and include basic application use cases. Copyright © 2014 Elsevier Inc. All rights reserved.
-
Plumley, George
2011-01-01
The eagerly anticipated second edition, completely updated for WordPress 3.1 As an open source content management system, WordPress allows users to easily build feature-rich web sites with no programming experience. This unique book-and-video package is a friendly, self-paced beginners guide to the latest release of WordPress. Lessons are focused on practical, everyday tasks that users will need to create and maintain their sites: entering new content, creating new pages, managing menus, making content search-engine friendly. Plus you'll find lots of tips based on years of experience teaching
-
Fluorinated Amine Stereotriads via Allene Amination.
Liu, Lu; Gerstner, Nels C; Oxtoby, Lucas J; Guzei, Ilia A; Schomaker, Jennifer M
2017-06-16
The incorporation of fluorine into organic scaffolds often improves the bioactivity of pharmaceutically relevant compounds. C-F/C-N/C-O stereotriad motifs are prevalent in antivirals, neuraminidase inhibitors, and modulators of androgen receptors, but are challenging to install. An oxidative allene amination strategy using Selectfluor rapidly delivers triply functionalized triads of the form C-F/C-N/C-O, exhibiting good scope and diastereoselectivity for all syn products. The resulting stereotriads are readily transformed into fluorinated pyrrolidines and protected α-, β-, and γ-amino acids.
-
Theory of the Allen method and its practical bearing on pipe discharge measurement
International Nuclear Information System (INIS)
Guizerix, J.; Margrita, R.
1976-01-01
The Allen method for measurement of pipe discharge is based on a general relationship between discharge, instrument section volume and the first moment of the residence time distribution. An original demonstration of this standard chemical engineering relationship is given. The Allen method thus offers a very wide practical application scope. Requirements are limited to knowing the volume of the instrument section and the residence time distribution; the shape of the instrument section is immaterial. The information can be obtained for example by means of a system correlating the instrument section input and output signals [fr
-
Commentary on Sowcik and Allen: Getting Down to Business
Murphy, Susan Elaine
2013-01-01
Sowcik and Allen's paper, "Getting Down to Business: A Look at Leadership Education in Business Schools," identifies a number of compelling issues in improving leadership education in business schools and provides a thorough overview of how these efforts could benefit from the considerations present in the National Leadership Educators…
-
Directory of Open Access Journals (Sweden)
Bo You
2015-01-01
Full Text Available In order to predict pressing quality of precision press-fit assembly, press-fit curves and maximum press-mounting force of press-fit assemblies were investigated by finite element analysis (FEA. The analysis was based on a 3D Solidworks model using the real dimensions of the microparts and the subsequent FEA model that was built using ANSYS Workbench. The press-fit process could thus be simulated on the basis of static structure analysis. To verify the FEA results, experiments were carried out using a press-mounting apparatus. The results show that the press-fit curves obtained by FEA agree closely with the curves obtained using the experimental method. In addition, the maximum press-mounting force calculated by FEA agrees with that obtained by the experimental method, with the maximum deviation being 4.6%, a value that can be tolerated. The comparison shows that the press-fit curve and max press-mounting force calculated by FEA can be used for predicting the pressing quality during precision press-fit assembly.
-
Dijkstra, Arie; Zuidema, Rixt; Vos, Diederick; van Kalken, Marike
2014-01-01
Background: The Allen Carr training (ACt) is a popular one-session smoking cessation group training that is provided by licensed organizations that have the permission to use the Allen Carr method. However, few data are available on the effectiveness of the training. Methods: In a quasi-experimental
-
Generation of EMIC Waves Observed by Van Allen Probes at Low L-shells of Earth's Magnetosphere
Gamayunov, K. V.; Zhang, J.; Saikin, A.; Rassoul, H.
2017-12-01
In a multi-ion magnetospheric plasma, where the major species are H+, He+, and O+, the He-band of electromagnetic ion cyclotron (EMIC) waves is the dominant band observed in the inner magnetosphere, and waves are generally quasi-field-aligned inside the geostationary orbit. Almost all the satellite-based studies of EMIC waves before Van Allen Probes, however, have not reported waves below L 3.5. There is probably only one exception from the Akebono satellite where both the H-band and He-band EMIC waves were observed at L 2. The situation has changed dramatically after two Van Allen Probes spacecraft were launched on 30 August, 2012, and many EMIC wave events have been observed below L=4. The Van Allen Probes observations confirm that the He-band of EMIC waves is a dominant band in the inner magnetosphere, but the observation of the He-band waves below L=4 is a new and quite unexpected result compared to our knowledge about EMIC waves before the Van Allen Probes era. In addition, observations show that almost all the He-band EMIC waves are linearly polarized in the region L field, and energetic ion distribution functions will be taken from the Van Allen Probes observations during the EMIC wave event to calculate growth rates of EMIC waves. We will then identify the energetic ions responsible for instability, frequencies and normals generated, and physical mechanism of instability.
-
[A study on Horace N. Allen's medicine and recognition of Korean body].
Lee, Young Ah
2011-12-31
Je Jung Won was the first modern-style Government hospital built by the Korean King Ko-Jong in April 1885, and it was the medical missionary Horace Newton Allen(1858~1932) who made one of the greatest contributions to the establishment of the hospital. Allen was an American missionary. He graduated from Ohio Wesleyan University with a degree in theology in 1881, and completed one-yearcourse at Miami Medical College. In Korea and America he worked as a physician, a missionary, an American diplomatic minister to Korea and a Korean minister's secretary to America. While acting as a mediator between Korea and America, he knew and recorded the domestic and foreign situation of Korea during Gaehwagi(the civilized and enlightened age). Thus to study him is to understand Korea's Gaehwagi as well as to research American medical missionaries. During his stay in Korea(1884~1905), Allen steadily wrote diaries and letters about Korean politics, diplomacy, society, culture, and medicine. Thus his public/private record through diaries and letters(the quantity of these materials amounts to several thousands) supplements the Korean early modern era's historical record. However, until now these materials have received little scholarly attention from researchers except for a few historians of missionary work between Korea and America, or of Korean modern medicine. I intended to use these materials to suggest a new perspective on the study of Korean Gaehwagi. Allen, along with John W. Heron, who came to Seoul on June 21st 1885, treated about 10,460 Korean patients in the first year of the opening of JeJungWon. They made "the first annual report of the Korean Government Hospital". This report explained how Allen and Heron regarded and treated Korean patients. Allen's diaries, letters and other writings offer a realistic view of how the western people actually recognized the Korean people at that time. As a western doctor, Allen had an ambivalent attitude toward Korean medical concepts
-
Miks meil on kogu aeg kiire? / David Allen ; interv. Endrik Randoja
Allen, David
2006-01-01
Produktiivsuse ekspert vastab küsimustele ettevõetud tegevuste tulemuslikumalt lõpule viimise kohta. Lisa: Aja paremaks kasutamiseks pakub David Allen lisaks veel kolm tõhusat ja lihtsasti rakendatavat põhimõtet
-
Arthroscopic modified Mason-Allen technique for large U- or L-shaped rotator cuff tears.
Jung, Sung-Weon; Kim, Dong-Hee; Kang, Seung-Hoon; Lee, Ji-Heon
2017-07-01
While a conventional single- or double-row repair technique could be applied for repair of C-shaped tears, a different surgical strategy should be considered for repair of U- or L-shaped tears because they typically have complex patterns with anterior, posterior, or both mobile leaves. This study was performed to examine the outcomes of the modified Mason-Allen technique for footprint restoration in the treatment of large U- or L-shaped rotator cuff tears. Thirty-two patients who underwent an arthroscopic modified Mason-Allen technique for large U- or L-shaped rotator cuff tears between January 2012 and December 2013 were included in this study. Margin convergence was first performed to reduce the tear gap and tension, and then, an arthroscopic Mason-Allen technique was performed to restore the rotator cuff footprint in a side-to-end repair fashion. All patients were evaluated preoperatively and for a minimum of 2 years of follow-up with a visual analog scale (VAS) for pain, Constant score, and ultrasonography. There was significant improvement in all VAS and Constant scores compared with the preoperative values (P rotator cuff in our data. Overall satisfactory results were achieved in most patients, with the exception of those with severe fatty degeneration. An arthroscopic modified Mason-Allen technique could be an effective and reliable alternative for patients with large U- or L-shaped rotator cuff tears. Case Series, Therapeutic Level IV.
-
Directory of Open Access Journals (Sweden)
Nadia Fuchs
2010-12-01
Full Text Available Avec le personnage récurrent juif new-yorkais névrosé plus ou moins autobiographique, les films de Woody Allen ont créé, volontairement ou pas, leur propre mythologie et un genre à part entière composé de codes que le spectateur décrypte instantanément. Pourtant, Woody Allen est surtout un cinéaste post-moderne, analysant et déconstruisant les simulacres de son époque. Il est ainsi un passeur d'images retraçant l'histoire des arts modernes des XXe et XXIe siècles et de leurs stratégies énonciatives et réceptives.With the recurrent persona of the neurotic and more or less autobiographical Jewish New Yorker, Woody Allen's films have created, willingly or not, their own mythology and a specific genre made up of codes readily accessible to the spectator. However, Woody Allen is more than anything else a postmodern filmmaker who analyses and deconstructs the simulacra of his time. He is thus a conveyor of images which retrace the history of modern art of the XXth and XXIth centuries, and of their strategies of enunciation and reception.
-
Ring Current Response to Different Storm Drivers. Van Allen Probes and Cluster Observations.
Bingham, S.; Mouikis, C.; Kistler, L. M.; Spence, H. E.; Gkioulidou, M.; Claudepierre, S. G.; Farrugia, C. J.
2015-12-01
The ring current responds differently to the different solar and interplanetary storm drivers such as coronal mass injections, (CME's), co-rotating interaction regions (CIR's), high-speed streamers and other structures. The resulting changes in the ring current particle pressure change the global magnetic field, which affects the transport of the radiation belts. In order to determine the field changes during a storm it is necessary to understand the transport, sources and losses of the particles that contribute to the ring current. The source population of the storm time ring current is the night side plasma sheet. However, it is not clear how these convecting particles affect the storm time ring current pressure development. We use Van Allen Probes and Cluster observations together with the Volland-Stern and dipole magnetic field models to determine the contribution in the ring current pressure of the plasma sheet particles convecting from the night side that are on open drift paths, during the storm evolution. We compare storms that are related to different interplanetary drivers, CME and CIR, as observed at different local times.
-
Cross-scale observations of the 2015 St. Patrick's day storm: THEMIS, Van Allen Probes, and TWINS
International Nuclear Information System (INIS)
Goldstein, J.
2016-01-01
In this paper, we present cross-scale magnetospheric observations of the 17 March 2015 (St. Patrick's Day) storm, by Time History of Events and Macroscale Interactions during Substorms (THEMIS), Van Allen Probes (Radiation Belt Storm Probes), and Two Wide-angle Imaging Neutral-atom Spectrometers (TWINS), plus upstream ACE/Wind solar wind data. THEMIS crossed the bow shock or magnetopause 22 times and observed the magnetospheric compression that initiated the storm. Empirical models reproduce these boundary locations within 0.7 R E . Van Allen Probes crossed the plasmapause 13 times; test particle simulations reproduce these encounters within 0.5 R E . Before the storm, Van Allen Probes measured quiet double-nose proton spectra in the region of corotating cold plasma. About 15 min after a 0605 UT dayside southward turning, Van Allen Probes captured the onset of inner magnetospheric convection, as a density decrease at the moving corotation-convection boundary (CCB) and a steep increase in ring current (RC) proton flux. During the first several hours of the storm, Van Allen Probes measured highly dynamic ion signatures (numerous injections and multiple spectral peaks). Sustained convection after ~1200 UT initiated a major buildup of the midnight-sector ring current (measured by RBSP A), with much weaker duskside fluxes (measured by RBSP B, THEMIS a and THEMIS d). A close conjunction of THEMIS d, RBSP A, and TWINS 1 at 1631 UT shows good three-way agreement in the shapes of two-peak spectra from the center of the partial RC. A midstorm injection, observed by Van Allen Probes and TWINS at 1740 UT, brought in fresh ions with lower average energies (leading to globally less energetic spectra in precipitating ions) but increased the total pressure. Finally, the cross-scale measurements of 17 March 2015 contain significant spatial, spectral, and temporal structure.
-
Activity Regulation by Heteromerization of Arabidopsis Allene Oxide Cyclase Family Members
Czech Academy of Sciences Publication Activity Database
Otto, M.; Naumann, Ch.; Brandt, W.; Wasternack, Claus; Hause, B.
2016-01-01
Roč. 5, č. 1 (2016), č. článku 3. ISSN 2223-7747 R&D Projects: GA MŠk(CZ) LO1204 Institutional support: RVO:61389030 Keywords : Activity regulation * Arabidopsis allene oxide cyclase isoforms * Heteromerization Subject RIV: EB - Genetics ; Molecular Biology
-
El-Sepelgy, Osama
2018-01-18
A new iron-catalyzed chemoselective intramolecular hydroamination and hydroalkoxylation of the readily available α-allenic amines and alcohols to valuable unsaturated 5-membered heterocycles, 2,3-dihydropyrrole and 2,3-dihydrofuran, is reported. Effective selectivity control is achieved by a metal–ligand cooperative activation of the substrates. The mild reaction conditions and the use of low amounts of an air and moisture stable iron catalyst allow for the hydrofunctionalization of a wide range of allenes bearing different functional groups in good yields in the absence of base or any sensitive additives.
-
El-Sepelgy, Osama; Brzozowska, Aleksandra; Sklyaruk, Jan; Jang, Yoon Kyung; Zubar, Viktoriia; Rueping, Magnus
2018-01-01
A new iron-catalyzed chemoselective intramolecular hydroamination and hydroalkoxylation of the readily available α-allenic amines and alcohols to valuable unsaturated 5-membered heterocycles, 2,3-dihydropyrrole and 2,3-dihydrofuran, is reported. Effective selectivity control is achieved by a metal–ligand cooperative activation of the substrates. The mild reaction conditions and the use of low amounts of an air and moisture stable iron catalyst allow for the hydrofunctionalization of a wide range of allenes bearing different functional groups in good yields in the absence of base or any sensitive additives.
-
Hovering and forward flight energetics in Anna's and Allen's hummingbirds.
Clark, Christopher James; Dudley, Robert
2010-01-01
Aerodynamic theory predicts that the mechanical costs of flight are lowest at intermediate flight speeds; metabolic costs of flight should trend similarly if muscle efficiency is constant. We measured metabolic rates for nine Anna's hummingbirds (Calypte anna) and two male Allen's hummingbirds (Selasphorus sasin) feeding during flight from a free-standing mask over a range of airspeeds. Ten of 11 birds exhibited higher metabolic costs during hovering than during flight at intermediate airspeeds, whereas one individual exhibited comparable costs at hovering and during forward flight up to speeds of approximately 7 m s(-1). Flight costs of all hummingbirds increased at higher airspeeds. Relative to Anna's hummingbirds, Allen's hummingbirds exhibited deeper minima in the power curve, possibly due to higher wing loadings and greater associated costs of induced drag. Although feeding at a mask in an airstream may reduce body drag and, thus, the contributions of parasite power to overall metabolic expenditure, these results suggest that hummingbird power curves are characterized by energetic minima at intermediate speeds relative to hovering costs.
-
Prozaci asemel GTD ehk getting things done / David Allen ; interv. Endrik Randoja
Allen, David
2007-01-01
Konsultant ja koolitaja David Allen oma aja- ja enesejuhtimise meetodist GTD - getting things done. Vt. samas: Väikesed nipid, et tõhusam olla; Milles seisneb Alleni meetod; Kuidas ma oma ülesannet täitsin - logiraamat
-
Souza, V. M.; Vieira, L. E. A.; Medeiros, C.; Da Silva, L. A.; Alves, L. R.; Koga, D.; Sibeck, D. G.; Walsh, B. M.; Kanekal, S. G.; Jauer, P. R.;
2016-01-01
Analysis of particle pitch angle distributions (PADs) has been used as a means to comprehend a multitude of different physical mechanisms that lead to flux variations in the Van Allen belts and also to particle precipitation into the upper atmosphere. In this work we developed a neural network-based data clustering methodology that automatically identifies distinct PAD types in an unsupervised way using particle flux data. One can promptly identify and locate three well-known PAD types in both time and radial distance, namely, 90deg peaked, butterfly, and flattop distributions. In order to illustrate the applicability of our methodology, we used relativistic electron flux data from the whole month of November 2014, acquired from the Relativistic Electron-Proton Telescope instrument on board the Van Allen Probes, but it is emphasized that our approach can also be used with multiplatform spacecraft data. Our PAD classification results are in reasonably good agreement with those obtained by standard statistical fitting algorithms. The proposed methodology has a potential use for Van Allen belt's monitoring.
-
Allen Brain Atlas-Driven Visualizations: a web-based gene expression energy visualization tool.
Zaldivar, Andrew; Krichmar, Jeffrey L
2014-01-01
The Allen Brain Atlas-Driven Visualizations (ABADV) is a publicly accessible web-based tool created to retrieve and visualize expression energy data from the Allen Brain Atlas (ABA) across multiple genes and brain structures. Though the ABA offers their own search engine and software for researchers to view their growing collection of online public data sets, including extensive gene expression and neuroanatomical data from human and mouse brain, many of their tools limit the amount of genes and brain structures researchers can view at once. To complement their work, ABADV generates multiple pie charts, bar charts and heat maps of expression energy values for any given set of genes and brain structures. Such a suite of free and easy-to-understand visualizations allows for easy comparison of gene expression across multiple brain areas. In addition, each visualization links back to the ABA so researchers may view a summary of the experimental detail. ABADV is currently supported on modern web browsers and is compatible with expression energy data from the Allen Mouse Brain Atlas in situ hybridization data. By creating this web application, researchers can immediately obtain and survey numerous amounts of expression energy data from the ABA, which they can then use to supplement their work or perform meta-analysis. In the future, we hope to enable ABADV across multiple data resources.
-
Allen Brain Atlas-Driven Visualizations: A Web-Based Gene Expression Energy Visualization Tool
Directory of Open Access Journals (Sweden)
Andrew eZaldivar
2014-05-01
Full Text Available The Allen Brain Atlas-Driven Visualizations (ABADV is a publicly accessible web-based tool created to retrieve and visualize expression energy data from the Allen Brain Atlas (ABA across multiple genes and brain structures. Though the ABA offers their own search engine and software for researchers to view their growing collection of online public data sets, including extensive gene expression and neuroanatomical data from human and mouse brain, many of their tools limit the amount of genes and brain structures researchers can view at once. To complement their work, ABADV generates multiple pie charts, bar charts and heat maps of expression energy values for any given set of genes and brain structures. Such a suite of free and easy-to-understand visualizations allows for easy comparison of gene expression across multiple brain areas. In addition, each visualization links back to the ABA so researchers may view a summary of the experimental detail. ABADV is currently supported on modern web browsers and is compatible with expression energy data from the Allen Mouse Brain Atlas in situ hybridization data. By creating this web application, researchers can immediately obtain and survey numerous amounts of expression energy data from the ABA, which they can then use to supplement their work or perform meta-analysis. In the future, we hope to enable ABADV across multiple data resources.
-
Oliw, Ernst H; Hamberg, Mats
2017-08-01
Fungi can produce jasmonic acid (JA) and its isoleucine conjugate in large quantities, but little is known about the biosynthesis. Plants form JA from 18:3 n -3 by 13 S -lipoxygenase (LOX), allene oxide synthase, and allene oxide cyclase. Shaking cultures of Fusarium oxysporum f. sp. tulipae released over 200 mg of jasmonates per liter. Nitrogen powder of the mycelia expressed 10 R -dioxygenase-epoxy alcohol synthase activities, which was confirmed by comparison with the recombinant enzyme. The 13 S -LOX of F. oxysporum could not be detected in the cell-free preparations. Incubation of mycelia in phosphate buffer with [17,17,18,18,18- 2 H 5 ]18:3 n -3 led to biosynthesis of a [ 2 H 5 ]12-oxo-13-hydroxy-9 Z ,15 Z -octadecadienoic acid (α-ketol), [ 2 H 5 ]12-oxo-10,15 Z -phytodienoic acid (12-OPDA), and [ 2 H 5 ]13-keto- and [ 2 H 5 ]13 S -hydroxyoctadecatrienoic acids. The α-ketol consisted of 90% of the 13 R stereoisomer, suggesting its formation by nonenzymatic hydrolysis of an allene oxide with 13 S configuration. Labeled and unlabeled 12-OPDA were observed following incubation with 0.1 mM [ 2 H 5 ]18:3 n -3 in a ratio from 0.4:1 up to 47:1 by mycelia of liquid cultures of different ages, whereas 10 times higher concentration of [ 2 H 5 ]13 S -hydroperoxyoctadecatrienoic acid was required to detect biosynthesis of [ 2 H 5 ]12-OPDA. The allene oxide is likely formed by a cytochrome P450 or catalase-related hydroperoxidase. We conclude that F. oxysporum , like plants, forms jasmonates with an allene oxide and 12-OPDA as intermediates. Copyright © 2017 by the American Society for Biochemistry and Molecular Biology, Inc.
-
Allen diesel standby sets at Sellafield
International Nuclear Information System (INIS)
Ruff, G.
1982-01-01
As part of the extension and improvement plans for the British Nuclear Fuels Ltd reprocessing facilities at Sellafield, three Allen diesel engines have been installed for essential standby duty. They are 16-cylinder V-form engines with a continuous rating of 2,832 bhp and drive a 2000kW 11,000 volt 3 phase 50Hz salient pole synchronous alternator at 750r/min. They are arranged for running in parallel and with the public electricity mains supply and are also controlled to operate as standby in the event of mains failure. To prevent radioactive contamination from the atmosphere, primary and secondary air filtration has been supplied for each engine. Other operational facilities and safeguards are mentioned and the cooling system described. (U.K.)
-
International Nuclear Information System (INIS)
Heller, G.; Adelmann, M.; Konigs, W.; Wendorf, W.
1984-01-01
Pressing device for producing compacts from source material in powder form, in particular pulverized nuclear reactor fuel having a die-plate contained in platen and a bore associated with a ram, for receiving source material powder, a filling shoe, and a reservoir for powder connected by a hose to the filling shoe. The device is characterized by a passing wheel in the filling shoe as filling aid means; a tube containing a feedscrew disposed between the reservoir and hose as metering means; the reservoir having a bottom part with a can type place-on part with an opening eccentric to the axis; a coupling part and a cover part are placed on the open part of the can, these parts are also provided with a passageway to the feedscrew eccentric to the longitudinal axis
-
Fast Magnetosonic Waves Observed by Van Allen Probes: Testing Local Wave Excitation Mechanism
Min, Kyungguk; Liu, Kaijun; Wang, Xueyi; Chen, Lunjin; Denton, Richard E.
2018-01-01
Linear Vlasov theory and particle-in-cell (PIC) simulations for electromagnetic fluctuations in a homogeneous, magnetized, and collisionless plasma are used to investigate a fast magnetosonic wave event observed by the Van Allen Probes. The fluctuating magnetic field observed exhibits a series of spectral peaks at harmonics of the proton cyclotron frequency Ωp and has a dominant compressional component, which can be classified as fast magnetosonic waves. Furthermore, the simultaneously observed proton phase space density exhibits positive slopes in the perpendicular velocity space, ∂fp/∂v⊥>0, which can be a source for these waves. Linear theory analyses and PIC simulations use plasma and field parameters measured in situ except that the modeled proton distribution is modified to have larger ∂fp/∂v⊥ under the assumption that the observed distribution corresponds to a marginally stable state when the distribution has already been scattered by the excited waves. The results show that the positive slope is the source of the proton cyclotron harmonic waves at propagation quasi-perpendicular to the background magnetic field, and as a result of interactions with the excited waves the evolving proton distribution progresses approximately toward the observed distribution.
-
Master Illustrator Allen Say Opens Students' Eyes to the Artist's Craft.
Brehl, Sandy
2002-01-01
Discusses how the author uses Allen Say's picture storybooks to introduce intimidating (even to adults!) artistic language and concepts. Elaborates on several books that she used with her third-grade students. Demonstrates that a meaningful encounter with a skilled artist can change the way students see art in literary experiences and in their…
-
Paradiplomacia y desarrollo económico en la región transfronteriza de Reynosa-McAllen
Directory of Open Access Journals (Sweden)
Karla María Nava Aguirre
2018-02-01
Full Text Available La paradiplomacia es un nuevo fenómeno de participación internacional de gobiernos locales y otras entidades no-estatales. La investigación tiene como objetivo analizar la construcción paradiplomática y observar el desarrollo económico en la región transfronteriza Reynosa-McAllen a partir del Tratado de Libre Comercio de América del Norte (TLCAN. Se utilizó la investigación cualitativa con un enfoque descriptivo. Los instrumentos de recolección de información fueron la revisión bibliográfica y la entrevista. Los hallazgos demuestran que las actividades de vinculación entre Reynosa y McAllen, obedecen al trabajo en equipo que se realiza principalmente entre el Gobierno Municipal de Reynosa, Gobierno del Estado de Tamaulipas y la organización McAllen Economic Development Corporation (MEDC, que han incrementado la inversión y empleo generando un desarrollo económico en esta región transfronteriza.
-
Quantitative mid-infrared spectra of allene and propyne from room to high temperatures
Es-sebbar, Et-touhami; Jolly, A.; Benilan, Y.; Farooq, Aamir
2014-01-01
Allene (a-C3H4; CH2CCH2) and propyne (p-C3H4; CH3C2H) have attracted much interest because of their relevance to the photochemistry in astrophysical environments as well as in combustion processes. Both allene and propyne have strong absorption in the infrared region. In the present work, infrared spectra of a-C3H4 and p-C3H4 are measured in the gas phase at temperatures ranging from 296 to 510 K. The spectra are measured over the 580-3400 cm-1 spectral region at resolutions of 0.08 and 0.25 cm-1 using Fourier Transform Infrared spectroscopy. Absolute integrated intensities of the main infrared bands are determined at room temperature and compared with values derived from literature for both molecules. Integrated band intensities are also determined as a function of temperature in various spectral regions.
-
Quantitative mid-infrared spectra of allene and propyne from room to high temperatures
Es-sebbar, Et-touhami
2014-11-01
Allene (a-C3H4; CH2CCH2) and propyne (p-C3H4; CH3C2H) have attracted much interest because of their relevance to the photochemistry in astrophysical environments as well as in combustion processes. Both allene and propyne have strong absorption in the infrared region. In the present work, infrared spectra of a-C3H4 and p-C3H4 are measured in the gas phase at temperatures ranging from 296 to 510 K. The spectra are measured over the 580-3400 cm-1 spectral region at resolutions of 0.08 and 0.25 cm-1 using Fourier Transform Infrared spectroscopy. Absolute integrated intensities of the main infrared bands are determined at room temperature and compared with values derived from literature for both molecules. Integrated band intensities are also determined as a function of temperature in various spectral regions.
-
Rate Coefficients of the Reaction of OH with Allene and Propyne at High Temperatures
Es-sebbar, Et-touhami
2016-09-28
Allene (H2C═C═CH2; a-C3H4) and propyne (CH3C≡CH; p-C3H4) are important species in various chemical environments. In combustion processes, the reactions of hydroxyl radicals with a-C3H4 and p-C3H4 are critical in the overall fuel oxidation system. In this work, rate coefficients of OH radicals with allene (OH + H2C═C═CH2 → products) and propyne (OH + CH3C≡CH → products) were measured behind reflected shock waves over the temperature range of 843–1352 K and pressures near 1.5 atm. Hydroxyl radicals were generated by rapid thermal decomposition of tert-butyl hydroperoxide ((CH3)3–CO–OH), and monitored by narrow line width laser absorption of the well-characterized R1(5) electronic transition of the OH A–X (0,0) electronic system near 306.7 nm. Results show that allene reacts faster with OH radicals than propyne over the temperature range of this study. Measured rate coefficients can be expressed in Arrhenius form as follows: kallene+OH(T) = 8.51(±0.03) × 10–22T3.05 exp(2215(±3)/T), T = 843–1352 K; kpropyne+OH(T) = 1.30(±0.07) × 10–21T3.01 exp(1140(±6)/T), T = 846–1335 K.
-
Directory of Open Access Journals (Sweden)
Neha Phadke
2015-11-01
Full Text Available The synthesis of a series of allene complexes (POCOPIr(η2-RC=.=CR’ 1b–4b (POCOP = 2,6-bis(di-tert-butylphosphonitobenzene via isomerization of internal alkynes is reported. We have demonstrated that the application of this methodology is viable for the isomerization of a wide variety of alkyne substrates. Deuterium labeling experiments support our proposed mechanism. The structures of the allene complexes 1b–4b were determined using spectroscopic data analysis. Additionally, the solid-state molecular structure of complex 2b was determined using single crystal X-ray diffraction studies and it confirmed the assignment of an iridium-bound allene isomerization product. The rates of isomerization were measured using NMR techniques over a range of temperatures to allow determination of thermodynamic parameters. Finally, we report a preliminary step towards developing a catalytic methodology; the allene may be liberated from the metal center by exposure of the complex to an atmosphere of carbon monoxide.
-
Mathematics and Humor: John Allen Paulos and the Numeracy Crusade
Paul H. Grawe
2015-01-01
John Allen Paulos at minimum gave the Numeracy movement a name through his book Innumeracy: Mathematical Illiteracy and Its Consequences. What may not be so obvious was Paulos’ strong interest in the relationship between mathematics and mathematicians on the one hand and humor and stand-up-comedian joke structures on the other. Innumeracy itself could be seen as a typically mathematical Gotcha joke on American culture generally. In this perspective, a Minnesotan acculturated to Minnesota-Nice...
-
Well-posedness for one-dimensional anisotropic Cahn-Hilliard and Allen-Cahn systems
Directory of Open Access Journals (Sweden)
Ahmad Makki
2015-01-01
Full Text Available Our aim is to prove the existence and uniqueness of solutions for one-dimensional Cahn-Hilliard and Allen-Cahn type equations based on a modification of the Ginzburg-Landau free energy proposed in [8]. In particular, the free energy contains an additional term called Willmore regularization and takes into account strong anisotropy effects.
-
Richardson, Kristen Mundie
2015-01-01
Island systems have long been valuable to ecological research as they provide natural experiments for the study of ecosystem processes. We examined Allen, Leaf, U and Flat Rock Reef Cays in the Bahamas to study the effects of seabird driven marine subsidies and invasive mice on island food webs on the body size and foraging ecology of the Allen Cays Rock Iguana (Cyclura cychlura inornata). Iguanas on an island with nesting seabirds (Allen Cay) had 6 times the body mass and 1.7 times the snout...
-
Smashing WordPress Themes Making WordPress Beautiful
Hedengren, Thord Daniel
2011-01-01
The ultimate guide to WordPress Themes - one of the hottest topics on the web today WordPress is so much more than a blogging platform, and Smashing WordPress Themes teaches readers how to make it look any way they like - from a corporate site, to a photography gallery and moreWordPress is one of the hottest tools on the web today and is used by sites including The New York Times, Rolling Stone, flickr, CNN, NASA and of course Smashing MagazineBeautiful full colour throughout - web designers expect nothing lessSmashing Magazine will fully support this book by by promoting it through their webs
-
Poh, Jian-Siang; Tran, Duc N; Battilocchio, Claudio; Hawkins, Joel M; Ley, Steven V
2015-01-01
A copper-catalyzed coupling reaction between flow-generated unstabilized diazo compounds and terminal alkynes provides di- and trisubstituted allenes. This extremely mild and rapid transformation is highly tolerant of several functional groups. PMID:26013774
-
Performing Allen's test in immobile hand: The Esmarch bandage method
Directory of Open Access Journals (Sweden)
Nebil Yesiloglu
2015-12-01
Full Text Available In this study, an alternative method of assessing hand vascular flow using a modification of Allen's test is presented. This technique may be helpful for patients who have immobile hands due to severe trauma, patients scheduled for free tissue transfer reconstruction, patients under general anesthesia in intensive care units that require serial arterial blood gas analyses, and emergency coronary by-pass candidates who decided to receive radial arterial grafts. [Hand Microsurg 2015; 4(3.000: 83-85
-
Regioselective Aziridination of Silyl Allenes and Application for the Synthesis of New Heterocycles
Burke, Eileen Grace
Rhodium catalyzed aziridination of homoallenic sulfamates has proven to be a successful first step in the synthesis of a diverse array of complex nitrogenated motifs. Previously, however, the resultant methyleneaziridine was limited to the exocyclic isomer. In this work, a reliable direction strategy for the formation of the endocyclic isomer was identified. Placement of a silicon group on the allene so that its C - Si bond is co-planar to the distal pi-bond allowed for stabilization of the developing positive charge during aziridination, and therefore selective activation to form the endocyclic methyleneaziridine. This strategy proved robust, and endocyclic methyleneaziridines were formed in high yields with exclusive formation of the desired isomer regardless of the substitution of the allene. With the endocyclic isomer now readily available, its reactivity could be explored. First, the endocyclic methyleneaziridine was applied to the synthesis of densely functionalized, nitrogen containing motifs. In comparison with their exocyclic counterparts, the endocyclic methyleneaziridines were found to have differing reactivity. The olefin could be epoxidized using meta-chloroperoxybenzoic acid (mCPBA), and the resulting spirocyclic intermediate rapidly rearranged to an azetidin-3-one. This synthesis of the highly substituted fourmembered heterocycle represented a novel approach to these motifs, and was found to be both flexible, and to selectively form a single diastereomer. Additional derivatization of these scaffolds gave a diverse array of complex products. Further use of the endocyclic methyleneaziridine focused not on the complexity of the product motif but rather on its utility. The remaining silyl group could be eliminated upon reaction with a fluoride source, triggering the formation of an alkyne and resultant opening of the aziridine. This strained heterocyclic alkyne and its synthesis represent a new addition to the field of strained alkyne synthesis. Uniquely
-
RELATIONSHIP BETWEEN COMPACTING PRESSURE AND CONDITIONS IN PRESSING CHAMBER DURING BIOMASS PRESSING
Directory of Open Access Journals (Sweden)
Peter Križan
2016-02-01
Full Text Available In this paper, we will present the impact of the conditions in pressing chambers during the pressing of wooden briquettes. The conditions in pressing chambers can significantly impact the resulting compacting pressure required for the pressing of briquettes. In the introduction, we show which parameters of the pressing chamber during pressing can impact the resulting compacting pressure. The experiment results which are shown in this paper described the detected impact of some important pressing chamber parameters. This experiment aims to detect the pressing chamber length impact and the impact of the way of pressing. By setting the pressing conditions, we will be able to achieve the suitable resulting compacting pressure with respect to the required final briquettes quality.
-
Romeo, G.; Barnes, R. J.; Ukhorskiy, A. Y.; Sotirelis, T.; Stephens, G.
2017-12-01
The Science Gateway gives single-point access to over 4.5 years of comprehensive wave and particle measurements from the Van Allen Probes NASA twin-spacecraft mission. The Gateway provides a set of visualization and data analysis tools including: HTML5-based interactive visualization of high-level data products from all instrument teams in the form of: line plots, orbital content plots, dynamical energy spectra, L-shell context plots (including two-spacecraft plotting), FFT spectra of wave data, solar wind and geomagnetic indices data, etc.; download custom multi-instrument CDF data files of selected data products; publication quality plots of digital data; combined orbit predicts for mission planning and coordination including: Van Allen Probes, MMS, THEMIS, Arase (ERG), Cluster, GOES, Geotail, FIREBIRD; magnetic footpoint calculator for coordination with LEO and ground-based assets; real-time computation and processing of empirical magnetic field models - computation of magnetic ephemeris, computation of adiabatic invariants. Van Allen Probes is the first spacecraft mission to provide a nowcast of the radiation environment in the heart of the radiation belts, where the radiation levels are the highest and most dangerous for spacecraft operations. For this purpose, all instruments continuously broadcast a subset of their science data in real time. Van Allen Probes partners with four foreign institutions who operate ground stations that receive the broadcast: Korea (KASI), the Czech republic (CAS), Argentina (CONAE), and Brazil (INPE). The SpWx broadcast is then collected at APL and delivered to the community via the Science Gateway.
-
Lee, Kwang Won; Yang, Dae Suk; Lee, Gyu Sang; Ma, Chang Hyun; Choy, Won Sik
2018-05-23
This retrospective study compared the clinical and radiologic outcomes of patients who underwent arthroscopic rotator cuff repairs by the suture-bridge and double-row modified Mason-Allen techniques. From January 2012 to May 2013, 76 consecutive cases of full-thickness rotator cuff tear, 1 to 4 cm in the sagittal plane, for which arthroscopic rotator cuff repair was performed, were included. The suture-bridge technique was used in 37 consecutive shoulders; and the double-row modified Mason-Allen technique, in 39 consecutive shoulders. Clinical outcomes at a minimum of 2 years (mean, 35.7 months) were evaluated postoperatively using the visual analog scale; University of California, Los Angeles Shoulder Scale; American Shoulder and Elbow Surgeons Subjective Shoulder Scale; and Constant score. Postoperative cuff integrity was evaluated at a mean of 17.7 months by magnetic resonance imaging. At the final follow-up, the clinical outcomes improved in both groups (all P .05). The retear rate was 18.9% in the shoulders subjected to suture-bridge repair and 12.8% in the double-row modified Mason-Allen group; the difference was not significant (P = .361). Despite the presence of fewer suture anchors, the patients who underwent double-row modified Mason-Allen repair had comparable shoulder functional outcomes and a comparable retear rate with those who underwent suture-bridge repair. Therefore, the double-row modified Mason-Allen repair technique can be considered an effective treatment for patients with medium- to large-sized full-thickness rotator cuff tears. Copyright © 2018 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.
-
Zheng, H.; Holzworth, R. H., II; Brundell, J. B.; Hospodarsky, G. B.; Jacobson, A. R.; Fennell, J. F.; Li, J.
2017-12-01
Lightning produces strong broadband radio waves, called "sferics", which propagate in the Earth-ionosphere waveguide and are detected thousands of kilometers away from their source. Global real-time detection of lightning strokes including their time, location and energy, is conducted with the World Wide Lightning Location Network (WWLLN). In the ionosphere, these sferics couple into very low frequency (VLF) whistler waves which propagate obliquely to the Earth's magnetic field. A good match has previously been shown between WWLLN sferics and Van Allen Probes lightning whistler waves. It is well known that lightning whistler waves can modify the distribution of energetic electrons in the Van Allen belts by pitch angle scattering into the loss cone, especially at low L-Shells (referred to as LEP - Lightning-induced Electron Precipitation). It is an open question whether lightning whistler waves play an important role at high L-shells. The possible interactions between energetic electrons and lightning whistler waves at high L-shells are considered to be weak in the past. However, lightning is copious, and weak pitch angle scattering into the drift or bounce loss cone would have a significant influence on the radiation belt populations. In this work, we will analyze the continuous burst mode EMFISIS data from September 2012 to 2016, to find out lightning whistler waves above L = 3. Based on that, MAGEIS data are used to study the related possible wave-particle interactions. In this talk, both case study and statistical analysis results will be presented.
-
2011-02-18
... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-59: OTS No. H-4761] Franklin Financial... 11, 2011, the Office of Thrift Supervision approved the application of Franklin Financial Corporation MHC and Franklin Federal Savings Bank, Glen Allen, Virginia, to convert to the stock form of...
-
Bingham, S.; Mouikis, C.; Kistler, L. M.; Farrugia, C. J.; Paulson, K. W.; Huang, C. L.; Boyd, A. J.; Spence, H. E.; Kletzing, C.
2017-12-01
Whistler mode chorus waves are electromagnetic waves that have been shown to be a major contributor to enhancements in the outer radiation belt during geomagnetic storms. The temperature anisotropy of source electrons (10s of keV) provides the free energy for chorus waves, which can accelerate sub-relativistic seed electrons (100s of keV) to relativistic energies. This study uses Van Allen Probe observations to examine the excitation and plasma conditions associated with chorus wave observations, the development of the seed population, and the outer radiation belt response in the inner magnetosphere, for 25 ICME and 35 CIR storms. Plasma data from the Helium Oxygen Proton Electron (HOPE) instrument and magnetic field measurements from the Electric and Magnetic Field Instrument Suite and Integrated Science (EMFISIS) are used to identify chorus wave activity and to model a linear theory based proxy for chorus wave growth. A superposed epoch analysis shows a peak of chorus wave power on the dawnside during the storm main phase that spreads towards noon during the storm recovery phase. According to the linear theory results, this wave activity is driven by the enhanced convection driving plasma sheet electrons across the dayside. Both ICME and CIR storms show comparable levels of wave growth. Plasma data from the Magnetic Electron Ion Spectrometer (MagEIS) and the Relativistic Electron Proton Telescope (REPT) are used to observe the seed and relativistic electrons. A superposed epoch analysis of seed and relativistic electrons vs. L shows radiation belt enhancements with much greater frequency in the ICME storms, coinciding with a much stronger and earlier seed electron enhancement in the ICME storms.
-
Dual Optical Comb LWIR Source and Sensor
2017-10-12
Justin M. Brown, Mark G. Allen Physical Sciences Inc. (PSI) Pierre Jouy, Jérôme Faist Swiss Federal Institute of Technology (ETH) Markus Geiser...Research, Development & Engineering Center Name of Contractor: Physical Sciences Inc. Principal Investigator: Dr. Joel M. Hensley Business...including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and
-
Brazell, Aaron
2010-01-01
The WordPress Bible provides a complete and thorough guide to the largest self hosted blogging tool. This guide starts by covering the basics of WordPress such as installing and the principles of blogging, marketing and social media interaction, but then quickly ramps the reader up to more intermediate to advanced level topics such as plugins, WordPress Loop, themes and templates, custom fields, caching, security and more. The WordPress Bible is the only complete resource one needs to learning WordPress from beginning to end.
-
Tim Allen, one of Hollywood's top comedy actors with Rolf Landua from CERN
Laurent Guiraud
2000-01-01
Tim Allen ('Galaxy Quest', 'For Richer and Poorer', 'The Santa Clause', Voice of 'Buzz Lightyear', in Toy Story 1 and 2), visited CERN in July 2000. He has a keen interest in modern physics. In his last book "I'm not really here" he contemplates the funny and the intriguing aspects of quantum physics in his daily life.
-
William Allen Miller (1817-70): a distinguished scientist re-discovered.
Ashley-Miller, Michael
2008-11-01
Dr William Allen Miller developed an early interest in science and astronomy at secondary school. Although qualifying in medicine, he pursued a career in Chemistry at King's College, London. A particular interest in spectrum analysis led to a collaboration with Dr Huggins in examining the spectra of stars. For this work they each received the Gold Medal of the Royal Astronomical Society. His subsequent work at King's College, the Royal Society, the Courts of Law and for various Government enterprises earned him an outstanding scientific and advisory reputation.
-
Interiores y Hannah y sus hermanas: artistas y creadores en el cine de Woody Allen
Directory of Open Access Journals (Sweden)
Francisco Casado Pérez
2015-01-01
Full Text Available Las reflexiones acerca del arte y las que tienen a los artistas que producen las obras como protagonistas son ejes fundamen- tales en la obra del cineasta neoyorquino Woody Allen. Mediante el estudio de dos de sus películas, Interiores y Hannah y sus hermanas, se analizan las diferentes actitudes de sus personajes al hacer frente a sus pulsiones creativas y cómo estas afectan a sus comportamientos en sociedad. En la primera, prácticamente todos los personajes proyectan en sus vidas sus insatisfacciones a la hora de desarrollar su arte, ya sea la escritura, la fotografía, la decoración, el cine o la interpretación. En la segunda, dos personajes, un pintor y un guionista televisivo, ofrecen más claves para dilucidar el amargo valor que da Allen a la labor artística.
-
Statistics of EMIC Rising Tones Observed by the Van Allen Probes
Sigsbee, K. M.; Kletzing, C.; Smith, C. W.; Santolik, O.
2017-12-01
We will present results from an ongoing statistical study of electromagnetic ion cyclotron (EMIC) wave rising tones observed by the Van Allen Probes. Using data from the Electric and Magnetic Field Instrument Suite and Integrated Science (EMFISIS) fluxgate magnetometer, we have identified orbits by both Van Allen Probes with EMIC wave events from the start of the mission in fall 2012 through fall 2016. Orbits with EMIC wave events were further examined for evidence of rising tones. Most EMIC wave rising tones were found during H+ band EMIC wave events. In Fourier time-frequency power spectrograms of the fluxgate magnetometer data, H+ band rising tones generally took the form of triggered emission type events, where the discrete rising tone structures rapidly rise in frequency out of the main band of observed H+ EMIC waves. A smaller percentage of EMIC wave rising tone events were found in the He+ band, where rising tones may appear as discrete structures with a positive slope embedded within the main band of observed He+ EMIC waves, similar in appearance to whistler-mode chorus elements. Understanding the occurrence rate and properties of rising tone EMIC waves will provide observational context for theoretical studies indicating that EMIC waves exhibiting non-linear behavior, such as rising tones, may be more effective at scattering radiation belt electrons than ordinary EMIC waves.
-
Sabin-Wilson, Lisa
2014-01-01
The bestselling WordPress guide, fully updated to cover the 2013 enhancements WordPress has millions of users, and this popular guide has sold more than 105,000 copies in its previous editions. With the newest releases of WordPress, author and WordPress expert Lisa Sabin-Wilson has completely updated the book to help you use and understand all the latest features. You'll learn about both the hosted WordPress.com version and the more flexible WordPress.org, which requires third-party hosting. Whether you're switching to WordPress from another blogging platform or just beginning to blog, you'll
-
In situ observations of Pc1 pearl pulsations by the Van Allen Probes
Paulson, K. W.; Smith, C. W.; Lessard, M. R.; Engebretson, M. J.; Torbert, R. B.; Kletzing, C. A.
2014-03-01
We present in situ observations of Pc1 pearl pulsations using the Van Allen Probes. These waves are often observed using ground-based magnetometers, but are rarely observed by orbiting satellites. With the Van Allen Probes, we have seen at least 14 different pearl pulsation events during the first year of operations. These new in situ measurements allow us to identify the wave classification based on local magnetic field conditions. Additionally, by using two spacecraft, we are able to observe temporal changes in the region of observation. The waves appear to be generated at an overall central frequency, as often observed on the ground, and change polarization from left- to right-handedness as they propagate into a region where they are resonant with the crossover frequency (where R- and L-mode waves have the same phase velocity). By combining both in situ and ground-based data, we have found that the region satisfying electromagnetic ion cyclotron wave generation conditions is azimuthally large while radially narrow. The observation of a similar modulation period on the ground as in the magnetosphere contradicts the bouncing wave packet mechanism of generation.
-
Jones, Charles W.
1981-04-07
A machine for pressing loose powder into pellets using a series of reciprocating motions has an interchangeable punch and die as its only accurately machines parts. The machine reciprocates horizontally between powder receiving and pressing positions. It reciprocates vertically to press, strip and release a pellet.
-
Press Advertising – Varieties and Sub-Varieties. Methods of Promoting the Press
Mikosz, Joanna
2016-01-01
In the text entitled “Press advertising – varieties and sub-varieties. Methods of promoting the press”, the author discusses press advertising, which is a fast developing mass-media phenomenon. Modernity has granted press advertising a high quality of print and paper, as well as Infinite possibilities of combining various promotional forms with the press. The author argues that press advertising is one of the best ways in which a company can communicate with the market. Its advantage is, abov...
-
Design and testing of a solar photovoltaic operated multi-seeds oil press
Energy Technology Data Exchange (ETDEWEB)
Mpagalile, J.J. [Department of Food Science and Technology, Sokoine University of Agriculture, P.O. Box 3006, Morogoro (Tanzania); Hanna, M.A.; Weber, R. [Industrial Agricultural Products Center, University of Nebraska, 209 L.W. Chase Hall, Lincoln, NE 68583-0730 (United States)
2006-10-15
Oil expression tests were conducted to evaluate the performance of a novel oil expeller designed and fabricated to operate on a 200W solar photovoltaic (PV) power system as a sole power source. The oil press was designed to press oilseeds meal with intermediate moisture content of 12+/-1% (w.b.) and 0.5-2mm particle sizes. Freshly grated coconuts and ground peanuts were used to determine the oil expression efficiency of the press. The oilseed samples were pressed for 12min with a maximum pressure of 3.0MPa being reached at 6min of pressing for peanuts and 8min of pressing for coconuts. The pressure was then held for the rest of the pressing time. The press attained an average oil expression efficiency of 73% for coconuts and 70% for peanuts. The force-vs.-deformation studies indicated that peanut press meal was compacted at a higher rate as compared to coconuts. The observation on the energy consumption indicated that there was a significant increase (P<0.05) in the specific energy requirement for both coconuts and peanuts after 6min of pressing, which resulted from the solidification of the press cake. An average specific energy of 36.55 and 20.35Wh/kg was recorded for peanuts and coconuts, respectively, after 12min of pressing. (author)
-
Evans, P Andrew; Negru, Daniela E; Shang, Deju
2015-04-13
The development of the stereoselective rhodium-catalyzed [(3+2)+2] carbocyclization of alkynylidenecyclopropanes (ACPs) with substituted allenes is described. This work demonstrates that activated and unactivated allenes preferentially undergo carbometalation at the distal terminus to generate tri- and tetrasubstituted exocyclic olefins with a neutral rhodium catalyst. In addition, this method provides a strategy for the total synthesis of the guaiane family of sesquiterpenes, which are not directly accessible using alkynes as exogenous π-components. Finally, the preparation of the bicyclo[5.4.0]undecane ring system using a homologated ACP tether serves to further illustrate the versatility of this approach. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
-
Book review: The man who saved the whooping crane: The Robert Porter Allen story
King, Sammy L.
2013-01-01
Kathleen Kaska has done a remarkable job of capturing the life of Robert Porter Allen, truly one of the premier biologist/conservationists of the twentieth century. Allen, born in 1905, grew up reading outdoor adventure books and playing in the woods of northern Pennsylvania with his brother. At a young age, he was encouraged to join the Junior Audubon club and his passion for ornithology soon crystallized. He attended Lafayette College to study ornithology, but he was disinterested in academics and fared poorly. He dropped out after two years and joined the Merchant Marines. Not an auspicious beginning for such a highly respected scientist and conservationist! Soon, however, he landed a librarian job with Audubon and his diligence, acumen, and communication skills allowed him to take more and more responsibilities. He became one of the youngest Audubon sanctuary directors ever appointed, and he was also able to secure a fellowship through Cornell to work on Roseate Spoonbills (Platalea ajaja). Audubon later appointed him to lead their Whooping Crane (Grus americana) studies.
-
Synthesis of propargylic and allenic carbamates via the C-H amination of alkynes.
Grigg, R David; Rigoli, Jared W; Pearce, Simon D; Schomaker, Jennifer M
2012-01-06
Propargylic amines are important intermediates for the synthesis of nitrogen-containing heterocycles. The insertion of a nitrene into a propargylic C-H bond has not been explored, despite the attention directed toward the Rh-catalyzed amination of other types of C-H bonds. In this communication, the conversion of a series of homopropargylic carbamates to propargylic carbamates and aminated allenes is described. © 2011 American Chemical Society
-
Strong solutions for an incompressible Navier-Stokes/Allen-Cahn system with different densities
Li, Yinghua; Huang, Mingxia
2018-06-01
In this paper, we investigate a coupled Navier-Stokes/Allen-Cahn system describing a diffuse interface model for two-phase flow of viscous incompressible fluids with different densities in a bounded domain Ω \\subset R^N(N=2,3). We prove the existence and uniqueness of local strong solutions to the initial boundary value problem when the initial density function ρ _0 has a positive lower bound.
-
Pleurotus pulmonarius cultivation on amended palm press fibre waste
African Journals Online (AJOL)
Bola
2015-05-13
May 13, 2015 ... Seven different substrates (A to G) were prepared from saw dust, palm press ... can grow in a wide range of soil types with relatively low ..... documented to include; cotton waste, sugar cane ..... Canada wood ash sources. Can.
-
Sabin-Wilson, Lisa
2011-01-01
The bestselling guide to WordPress, fully updated to help you get your blog going! Millions of bloggers rely on WordPress, the popular, free blogging platform. This guide covers all the features and improvements in the most up-to-date version of WordPress. Whether you are switching to WordPress from another blogging platform or just starting your first blog, you'll find the advice in this friendly guide gets you up to speed on both the free-hosted WordPress.com version and WordPress.org, which requires the purchase of web hosting services, and figure out which version is best for you. You'll b
-
International Nuclear Information System (INIS)
Bower, Geoffrey C.; Croft, Steve; Keating, Garrett; Whysong, David; Backer, Don; Bauermeister, Amber; Blitz, Leo; Bock, Douglas; Cheng, Calvin; Dexter, Matt; Engargiola, Greg; Ackermann, Rob; Atkinson, Shannon; Backus, Peter; Bradford, Tucker; Davis, Mike; Dreher, John; Barott, Billy; Cork, Chris; DeBoer, Dave
2010-01-01
The Pi GHz Sky Survey (PiGSS) is a key project of the Allen Telescope Array. PiGSS is a 3.1 GHz survey of radio continuum emission in the extragalactic sky with an emphasis on synoptic observations that measure the static and time-variable properties of the sky. During the 2.5 year campaign, PiGSS will twice observe ∼250,000 radio sources in the 10,000 deg 2 region of the sky with b>30 0 to an rms sensitivity of ∼1 mJy. Additionally, sub-regions of the sky will be observed multiple times to characterize variability on timescales of days to years. We present here observations of a 10 deg 2 region in the Booetes constellation overlapping the NOAO Deep Wide Field Survey field. The PiGSS image was constructed from 75 daily observations distributed over a 4 month period and has an rms flux density between 200 and 250 μJy. This represents a deeper image by a factor of 4-8 than we will achieve over the entire 10,000 deg 2 . We provide flux densities, source sizes, and spectral indices for the 425 sources detected in the image. We identify ∼100 new flat-spectrum radio sources; we project that when completed PiGSS will identify 10 4 flat-spectrum sources. We identify one source that is a possible transient radio source. This survey provides new limits on faint radio transients and variables with characteristic durations of months.
-
Gerstner, Nels C; Adams, Christopher S; Tretbar, Maik; Schomaker, Jennifer M
2016-10-10
A tandem allene aziridination/[4+3]/reduction sequence converts simple homoallenic sulfamates into densely functionalized aminated cycloheptenes, where the relative stereochemistry at five contiguous asymmetric centers can be controlled through the choice of the solvent and the reductant. The products resulting from this chemistry can be readily transformed into complex molecular scaffolds which contain up to seven contiguous stereocenters. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
-
Rhodium-catalyzed chemo-, regio-, and enantioselective addition of 2-pyridones to terminal allenes.
Li, Changkun; Kähny, Matthias; Breit, Bernhard
2014-12-08
A rhodium-catalyzed chemo-, regio-, and enantioselective addition of 2-pyridones to terminal allenes to give branched N-allyl 2-pyridones is reported. Preliminary mechanistic studies support the hypothesis that the reaction was initiated from the more acidic 2-hydroxypyridine form, and the initial kinetic O-allylation product was finally converted into the thermodynamically more stable N-allyl 2-pyridones. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
-
Aryan, H.; Sibeck, D. G.; Balikhin, M. A.; Agapitov, O. V.; Kletzing, C.
2016-12-01
Highly energetic electrons in the Earth's Van Allen radiation belts can cause serious damage to spacecraft electronic systems, and affect the atmospheric composition if they precipitate into the upper atmosphere. Whistler mode chorus waves have attracted significant attention in recent decades for their crucial role in the acceleration and loss of energetic electrons that ultimately change the dynamics of the radiation belts. The distribution of these waves in the inner magnetosphere is commonly presented as a function of geomagnetic activity. However, geomagnetic indices are non-specific parameters that are compiled from imperfectly covered ground based measurements. The present study uses wave data from the two Van Allen Probes to present the distribution of lower band chorus waves not only as functions of single geomagnetic index and solar wind parameters, but also as functions of combined parameters. Also the current study takes advantage of the unique equatorial orbit of the Van Allen Probes to estimate the average scale size of chorus wave packets, during close separations between the two spacecraft, as a function of radial distance, magnetic latitude, and geomagnetic activity respectively. Results show that the average scale size of chorus wave packets is approximately 1300 - 2300 km. The results also show that the inclusion of combined parameters can provide better representation of the chorus wave distributions in the inner magnetosphere, and therefore can further improve our knowledge of the acceleration and loss of radiation belt electrons.
-
Sigsbee, K.; Kletzing, C. A.; Smith, C. W.; Macdowall, R.; Spence, H.; Reeves, G.; Blake, J. B.; Baker, D. N.; Green, J. C.; Singer, H. J.;
2016-01-01
We examined an electron flux dropout during the 12-14 November 2012 geomagnetic storm using observations from seven spacecraft: the two Van Allen Probes, Time History of Events and Macroscale Interactions during Substorms (THEMIS)-A (P5), Cluster 2, and Geostationary Operational Environmental Satellites (GOES) 13, 14, and 15. The electron fluxes for energies greater than 2.0 MeV observed by GOES 13, 14, and 15 at geosynchronous orbit and by the Van Allen Probes remained at or near instrumental background levels for more than 24 h from 12 to 14 November. For energies of 0.8 MeV, the GOES satellites observed two shorter intervals of reduced electron fluxes. The first interval of reduced 0.8 MeV electron fluxes on 12-13 November was associated with an interplanetary shock and a sudden impulse. Cluster, THEMIS, and GOES observed intense He+ electromagnetic ion cyclotron (EMIC) waves from just inside geosynchronous orbit out to the magnetopause across the dayside to the dusk flank. The second interval of reduced 0.8 MeV electron fluxes on 13-14 November was associated with a solar sector boundary crossing and development of a geomagnetic storm with Dstwaves observed by the Van Allen Probes near dawn. A combination of adiabatic effects, losses to the magnetopause, scattering by EMIC waves, and acceleration by ULF waves can explain the observed electron behavior.
-
Pitch Angle Dependence of Drift Resonant Ions Observed by the Van Allen Probes
Rankin, R.; Wang, C.; Wang, Y.; Zong, Q. G.; Zhou, X.
2017-12-01
Acceleration and modulation of ring current ions by poloidal mode ULF waves is investigated. A simplified MHD model of ULF waves in a dipole magnetic field is presented that includes phase mixing to perpendicular scales determined by the ionospheric Pedersen conductivity. The wave model is combined with a full Lorentz force test particle code to study drift and drift bounce resonance wave-particle interactions. Ion trajectories are traced backward-in-time to an assumed form of the distribution function, and Liouville's method is used to reconstruct the phase space density response (PSD) poloidal mode waves observed by the Van Allen Probes. In spite of its apparent simplicity, simulations using the wave and test particle models are able to explain the acceleration of ions and energy dispersion observed by the Van Allen Probes. The paper focuses on the pitch angle evolution of the initial PSD as it responds to the action of ULF waves. An interesting aspect of the study is the formation of butterfly ion distributions as ions make periodic radial oscillations across L. Ions become trapped in an effective potential well across a limited range of L and follow trajectories that cause them to surf along constant phase fronts. The impications of this new trapping mechanism for both ions and electrons is discussed.
-
Investigation of pressing of molybdenum powder compacts
International Nuclear Information System (INIS)
Mymrin, S.A.; Kuznetsov, V.Eh.; Yampol'skij, M.L.; Leonov, S.A.; Mikhridinov, R.M.; Korzukhin, V.A.
1990-01-01
Results of an experimental investigation into pressing of compacts of MCh type molybdenum powders using the industrial equipment are presented. To measure the density of powder molybdenum billets a radioisotopic density meter with cesium-137 is used as radioactive gamma radiation source. The dependence of the produced billet density on the specific compacting pressure at different values of the powder bulk density is ascertained
-
Directory of Open Access Journals (Sweden)
Thomás Creus
2008-04-01
Full Text Available The objective of this essay is to compare the works of novelist Philip Roth and film-maker Woody Allen in what regards their treatment of the highly complex theme of the interrelations between fiction and reality. A comparative analysis of selected Roth’s novels and Allen’s films evinces their recurrent preoccupation with the creation of art and its implications, be it through the choice of writers or artists as main characters, be it through plots that mix real facts with invented ones and imaginary characters with real ones, be it through the use of autobiographical elements in a fictional discourse—all metafictional devices that call attention to the artist’s own process of creation. The objective of this essay is to compare the works of novelist Philip Roth and film-maker Woody Allen in what regards their treatment of the highly complex theme of the interrelations between fiction and reality. A comparative analysis of selected Roth’s novels and Allen’s films evinces their recurrent preoccupation with the creation of art and its implications, be it through the choice of writers or artists as main characters, be it through plots that mix real facts with invented ones and imaginary characters with real ones, be it through the use of autobiographical elements in a fictional discourse—all metafictional devices that call attention to the artist’s own process of creation.
-
Eshon, Josephine; Landis, Clark R; Schomaker, Jennifer M
2017-09-15
The efficient hydroformylation of 1,1,3-trisubstituted allenes is accomplished with low loadings of a Rh catalyst supported by a BisDiazaPhos (BDP) ligand. The ligand identity is key to achieving high regioselectivity, while the mild reaction conditions minimize competing isomerization and hydrogenation to produce β,γ-unsaturated aldehydes and their derivatives in excellent yields.
-
Office of Personnel Management — A press release, news release, media release, press statement is written communication directed at members of the news media for the purpose of announcing programs...
-
Siarto, Jeff
2010-01-01
Whether you're promoting your business or writing about your travel adventures, Head First WordPress will teach you not only how to make your blog look unique and attention-grabbing, but also how to dig into the more complex features of WordPress 3.0 to make your website work well, too. You'll learn how to move beyond the standard WordPress look and feel by customizing your blog with your own URL, templates, plugin functionality, and more. As you learn, you'll be working with real WordPress files: The book's website provides pre-fab WordPress themes to download and work with as you follow al
-
WordPress multisite administration
Longren, Tyler
2013-01-01
This is a simple, concise guide with a step-by-step approach, packed with screenshots and examples to set up and manage a network blog using WordPress.WordPress Multisite Administration is ideal for anyone wanting to familiarize themselves with WordPress Multisite. You'll need to know the basics about WordPress, and having at least a broad understanding of HTML, CSS, and PHP will help, but isn't required.
-
Dougherty, Peter J.
2012-01-01
The modern world's understanding of American university press has long been shaped by university-press books. American university-press books are good international advertisements for the universities whose logos grace their spines. The growth of transnational scholarship and the expansion of digital communications networks are converging in ways…
-
New home construction: Eric Allen
Energy Technology Data Exchange (ETDEWEB)
1987-02-01
This report describes some special energy efficient measures incorporated in the construction of a modestly-priced two and a half storey frame house with a floor area of 108 m{sup 2}. The house was built facing south, on a south-sloping lot with a thick stand of Jack Pine on the north side. The major energy efficient measures are: continuous air-vapour barrier and high insulation level to make the house as air-tight as possible; the use of passive solar heat which is expected to supply 37% of the annual heating requirements; a crawlspace plenum which draws hot air from the top of the house and recirculates it under the first floor; and use of horizontal strapping on which all wall partitions, electrical and plumbing work was done in order not to break the continuous air-vapour barrier and which itself provides extra insulation. The cost of making the house energy efficient was $2,500. The price of the house on completion was projected to be $65,000. The cost for the energy efficiency measures is 4% of the total. The Allen house is a good example of how an investment of a small percentage of the total cost, and about 67 hours of work, can result in an energy efficient house. The resulting savings on energy bills can be quite significant and can mean a return on the investment within 5 years. 3 figs., 1 tab.
-
International Nuclear Information System (INIS)
Chang, Y-K; Chau-N H, Franklin
2009-01-01
Zinc oxide nanowire field-effect transistors (NW-FETs) were fabricated combining the dielectrophoresis (DEP) and the hot-pressing methods. DEP was used to position both ends of the nanowires on top of the source and the drain electrodes, respectively. Hot-pressing of nanowires on the electrodes was then employed to ensure good contacts between the nanowires and the electrodes. The good device performance achieved with our method of fabrication indicates that DEP combined with hot-pressing has the potential to be applied to the fabrication of flexible electronics on a roll-to-roll basis.
-
DEFF Research Database (Denmark)
Ranjbar, Navid; Mehrali, Mohammad; Maheri, Mahmoud R.
2017-01-01
This research explores the use of simultaneous heating and pressing techniques in order to enhance the mechanical properties of fly ash (FA) based geopolymer under relatively low temperature conditions to ensure minimum-porosity. Four effective parameters of pressing force, alkali activator...
-
ACTIVATED HOT PRESSING BEHAVIOR OF WC NANOPOWDERS
Directory of Open Access Journals (Sweden)
Edwin GEVORKYAN
2010-06-01
Full Text Available The questions of consolidation of nanopowders concerning hot compaction by pressing activated by electric current action are considered. Mechanisms of grain boundary creep-sliding which are sequentially prevalent in a forming of compacted structures under influence of temperature factor and in the presence of a direct electric heating are discussed. Structural-transformational sources and conditions of forming of high physical-mechanical properties of nanopowder refractory solid-state products are described.
-
Dong, Boliang; Peng, Haihui; Motika, Stephen E; Shi, Xiaodong
2017-08-16
The discovery of photoassisted diazonium activation toward gold(I) oxidation greatly extended the scope of gold redox catalysis by avoiding the use of a strong oxidant. Some practical issues that limit the application of this new type of chemistry are the relative low efficiency (long reaction time and low conversion) and the strict reaction condition control that is necessary (degassing and inert reaction environment). Herein, an alternative photofree condition has been developed through Lewis base induced diazonium activation. With this method, an unreactive Au I catalyst was used in combination with Na 2 CO 3 and diazonium salts to produce a Au III intermediate. The efficient activation of various substrates, including alkyne, alkene and allene was achieved, followed by rapid Au III reductive elimination, which yielded the C-C coupling products with good to excellent yields. Relative to the previously reported photoactivation method, our approach offered greater efficiency and versatility through faster reaction rates and broader reaction scope. Challenging substrates such as electron rich/neutral allenes, which could not be activated under the photoinitiation conditions (<5 % yield), could be activated to subsequently yield the desired coupling products in good to excellent yield. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
-
Directory of Open Access Journals (Sweden)
Peter Križan
2012-01-01
Full Text Available In this paper, we will present the impact of the conical shape of a pressing chamber, an important structural parameter. Besides the known impact of the technological parameters of pressing chambers, it is also very important to pay attention to their structural parameters. In the introduction, we present a theoretical analysis of pressing chamber conicalness. An experiment aimed at detecting this impact was performed at our institute, and it showed that increasing the conicalness of a pressing chamber improves the quality of the final briquettes. The conicalness of the pressing chamber has a significanteffect on the final briquette quality and on the construction of briquetting machines. The experimental findings presented here show the importance of this parameter in the briquetting process.
-
Teach yourself visually WordPress
Majure, Janet
2012-01-01
Get your blog up and running with the latest version of WordPress WordPress is one of the most popular, easy-to-use blogging platforms and allows you to create a dynamic and engaging blog, even if you have no programming skills or experience. Ideal for the visual learner, Teach Yourself VISUALLY WordPress, Second Edition introduces you to the exciting possibilities of the newest version of WordPress and helps you get started, step by step, with creating and setting up a WordPress site. Author and experienced WordPress user Janet Majure shares advice, insight, and best practices for taking full
-
Phosphine-catalyzed cycloadditions of allenic ketones: new substrates for nucleophilic catalysis.
Wallace, Debra J; Sidda, Rachel L; Reamer, Robert A
2007-02-02
A range of phosphine-catalyzed cycloaddition reactions of allenic ketones have been studied, extending the scope of these processes from the more widely used 2,3-butadienoates to allow access to a number of synthetically useful products. Reaction of allenyl methyl ketone 4 with exo-enones afforded spirocyclic compounds in good regioselectivity and promising enantioselectivity via a [2 + 3] cycloaddtion. Aromatic allenyl ketones undergo a phosphine-promoted dimerization to afford functionalized pyrans, leading to a formal [2 + 4] Diels-Alder product, but did not react in the [2 + 3] cycloaddition. The results from other reactions that had found utility with 2,3-butadienoates are also reported.
-
Photofragment imaging study of the CH2CCH2OH radical intermediate of the OH+allene reaction
International Nuclear Information System (INIS)
Raman, Arjun S.; Justine Bell, M.; Lau, K.-C.; Butler, Laurie J.
2007-01-01
These velocity map imaging experiments characterize the photolytic generation of one of the two radical intermediates formed when OH reacts via an addition mechanism with allene. The CH 2 CCH 2 OH radical intermediate is generated photolytically from the photodissociation of 2-chloro-2-propen-1-ol at 193 nm. Detecting the Cl atoms using [2+1] resonance-enhanced multiphoton ionization evidences an isotropic angular distribution for the Cl+CH 2 CCH 2 OH photofragments, a spin-orbit branching ratio for Cl( 2 P 1/2 ):Cl( 2 P 3/2 ) of 0.28, and a bimodal recoil kinetic energy distribution. Conservation of momentum and energy allows us to determine from this data the internal energy distribution of the nascent CH 2 CCH 2 OH radical cofragment. To assess the possible subsequent decomposition pathways of this highly vibrationally excited radical intermediate, we include electronic structure calculations at the G3//B3LYP level of theory. They predict the isomerization and dissociation transition states en route from the initial CH 2 CCH 2 OH radical intermediate to the three most important product channels for the OH+allene reaction expected from this radical intermediate: formaldehyde+C 2 H 3 , H+acrolein, and ethene+CHO. We also calculate the intermediates and transition states en route from the other radical adduct, formed by addition of the OH to the center carbon of allene, to the ketene+CH 3 product channel. We compare our results to a previous theoretical study of the O+allyl reaction conducted at the CBS-QB3 level of theory, as the two reactions include several common intermediates
-
Photofragment imaging study of the CH2CCH2OH radical intermediate of the OH +allene reaction
Raman, Arjun S.; Justine Bell, M.; Lau, Kai-Chung; Butler, Laurie J.
2007-10-01
These velocity map imaging experiments characterize the photolytic generation of one of the two radical intermediates formed when OH reacts via an addition mechanism with allene. The CH2CCH2OH radical intermediate is generated photolytically from the photodissociation of 2-chloro-2-propen-1-ol at 193nm. Detecting the Cl atoms using [2+1] resonance-enhanced multiphoton ionization evidences an isotropic angular distribution for the Cl +CH2CCH2OH photofragments, a spin-orbit branching ratio for Cl(P1/22):Cl(P3/22) of 0.28, and a bimodal recoil kinetic energy distribution. Conservation of momentum and energy allows us to determine from this data the internal energy distribution of the nascent CH2CCH2OH radical cofragment. To assess the possible subsequent decomposition pathways of this highly vibrationally excited radical intermediate, we include electronic structure calculations at the G3//B3LYP level of theory. They predict the isomerization and dissociation transition states en route from the initial CH2CCH2OH radical intermediate to the three most important product channels for the OH +allene reaction expected from this radical intermediate: formaldehyde+C2H3, H +acrolein, and ethene+CHO. We also calculate the intermediates and transition states en route from the other radical adduct, formed by addition of the OH to the center carbon of allene, to the ketene+CH3 product channel. We compare our results to a previous theoretical study of the O +allyl reaction conducted at the CBS-QB3 level of theory, as the two reactions include several common intermediates.
-
International Nuclear Information System (INIS)
Park, Jiho; Kim, Hwajeong; Kim, Youngkyoo
2010-01-01
In this work we attempted to change the nanostructure and electrical properties of semiconducting polymer nanolayers by employing a nano-pressing technique. The semiconducting polymer nanolayers, which consist of poly(3-hexylthiophene) (P3HT) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C 61 (PCBM), were spin-coated on to a conducting polymer buffer layer coated on a transparent conducting oxide substrate. The coated P3HT:PCBM samples were precisely pressed using a nanopress system at 70 .deg. C. The nanostructures of the unpressed and the pressed P3HT:PCBM layers were investigated using a grazing incident angle X-ray diffraction (GIXD) system empowered by a synchrotron radiation source while the electrical properties of those samples were examined using a diode-type device. Results showed that the P3HT chain alignment was improved by pressing, accordingly, the device with the pressed layer exhibited enhanced charge transport characteristics.
-
Sigsbee, K.; Kletzing, C. A.; Smith, C. W.; Macdowall, R.; Spence, H.; Reeves, G.; Blake, J. B.; Baker, D. N.; Green, J. C.; Singer, H. J.;
2016-01-01
We examined an electron flux dropout during the 12-14 November 2012 geomagnetic storm using observations from seven spacecraft: the two Van Allen Probes, Time History of Events and Macroscale Interactions during Substorms (THEMIS)-A (P5), Cluster 2, and Geostationary Operational Environmental Satellites (GOES) 13, 14, and 15. The electron fluxes for energies greater than 2.0 MeV observed by GOES 13, 14, and 15 at geosynchronous orbit and by the Van Allen Probes remained at or near instrumental background levels for more than 24 h from 12 to 14 November. For energies of 0.8 MeV, the GOES satellites observed two shorter intervals of reduced electron fluxes. The first interval of reduced 0.8 MeV electron fluxes on 12-13 November was associated with an interplanetary shock and a sudden impulse. Cluster, THEMIS, and GOES observed intense He+ electromagnetic ion cyclotron (EMIC) waves from just inside geosynchronous orbit out to the magnetopause across the dayside to the dusk flank. The second interval of reduced 0.8 MeV electron fluxes on 13-14 November was associated with a solar sector boundary crossing and development of a geomagnetic storm with Dst<100 nT. At the start of the recovery phase, both the 0.8 and 2.0 MeV electron fluxes finally returned to near prestorm values, possibly in response to strong ultralow frequency (ULF) waves observed by the Van Allen Probes near dawn. A combination of adiabatic effects, losses to the magnetopause, scattering by EMIC waves, and acceleration by ULF waves can explain the observed electron behavior.
-
Analysis of Institutional Press Releases and its Visibility in the Press
Directory of Open Access Journals (Sweden)
José Antonio Alcoceba-Hernando, Ph.D.
2010-01-01
Full Text Available The relationships between institutional communication and media communication influence the shaping of social representations of public issues. This research article analyses these relationships based on the case study of the external communication of a public institution, the press releases of Spain’s Youth Institute (Instituto de la Juventud, aka, Injuve, during three years and their repercussion in the press during the same period of time. The results obtained in this research allowed drawing conclusions on the types of communication production of the aforementioned institution and the news treatment of such pieces of information by the printed and digital media. The press releases and the news items were studied using quantitative media content analysis which focused, especially, in referential issues like the information treatment, the thematic analysis, youth representations in the case of the releases; and the visibility of the press releases in the making of news
-
Corbin, Brandon
2010-01-01
Time flies when you're having fun. This is the right way to describe this WordPress Top Plugins book by Brandon Corbin. With real world examples and by showing you the perks of having these plugins installed on your websites, the author is all set to captivate your interest from start to end. Regardless of whether this is your first time working with WordPress, or you're a seasoned WordPress coding ninja, WordPress Top Plugins will walk you through finding and installing the best plugins for generating and sharing content, building communities and reader base, and generating real advertising r
-
Comparison of species-resolved energy spectra from ACE EPAM and Van Allen Probes RBSPICE
Patterson, J.; Manweiler, J. W.; Armstrong, T. P.; Lanzerotti, L. J.; Gerrard, A. J.; Gkioulidou, M.
2013-12-01
We present a comparison between energy spectra measured by the Advanced Composition Explorer (ACE) Electron Proton Alpha Monitor (EPAM) instrument and the Van Allen Probe Ion Composition Experiment (RBSPICE) for two significant and distinct events in early 2013. The first is an impulsive solar particle event on March 17th. While intense, this event presented no significant surprises in terms of its composition or anisotropy characteristics, thus providing a good baseline for response of the trapped radiation belts as observed by the Van Allen Probes. The second solar event occurred late May 22nd and early May 23rd. This event has a much greater concentration of medium and heavy ions than the St. Patrick's Day event, as well as having very peculiar energy spectra with evidence of two distinct populations. During the St. Patrick's Day Event, the energy spectra for helium, carbon, oxygen, neon, silicon, and iron all show the same spectral power law slope -3.1. The event shows strong anisotropy with intensities differing by a factor of four for both protons and Z>1 ions. The late May event also has strong anisotropy, and in the same directions as the St. Patrick's Day Event, but with very different composition and energy spectra. The spectra are much harder with power law spectral slopes of -0.5. Additionally, there is a significant spectral bump at 3 MeV/nuc for helium that is not present in the spectra of the heavier ions. The intensities of the heavier ions, however, show an increase that is an order of magnitude greater than the increase seen for helium. The March 17 RBSPICE observations show multiple injection events lasting for less than an hour each during the Van Allen Probes B apogees. These injections are seen in protons as well as Helium and only somewhat observed in Oxygen. Spectral slopes for the observations range from approximately -5 during quiet times to double peaked events with a spectral slope of approximately -2 at the beginning of the injection
-
Radical Designs: The Emergence of the Progressive Editorial in the Nineteenth-Century Press
Directory of Open Access Journals (Sweden)
David Dowling
2017-01-01
Full Text Available This article traces the transformation of the newspaper editorial in the nineteenth century from a partisan platform narrowly focused on contemporary politics into a broader more inclusive genre engaging progressive cultural reform with a literary bent. After 1814, the newspaper editorial spread its wings and soared with lofty poetic rhetoric and increasingly metaphorical language. Editors frequently broke into verse in their columns, inspired by the powerful presence of poetry and oratory in antebellum culture. A key figure at the heart of that oratorical and poetic culture was Ralph Waldo Emerson, who held a prominent position in print culture through books and newspaper reports of his speaking engagements. Horace Greeley, Karl Marx, Fanny Fern, Margaret Fuller, and Harriet Martineau form the subjects of this study because they reflect Emerson’s radical liberal influence on the emergence of the progressive editorial, particularly through literary stylistics blending poetic and philosophical rhetoric. These figures represent a diverse transatlantic mix of revolutionary and feminist columnists from the weekly and daily press who extended Emerson’s purview, especially his critiques of capitalism and institutional corruption. This approach diversifies previous understandings of the evolution of the editorial reflected in Allen Nevins’ American Press Opinion (1928, which exclusively focuses on American political editorials written by men. The more recent 1997 anthology of historical editorials by Sloan, Wray, and Sloan also excludes women and transnational journalism. The commercial press liberated the news industry from the partisan press, providing new opportunities for Emerson protégés such as Fuller to capitalize on her literary prowess, transcendentalist sensibility, and female perspective to offer some of the most politically powerful and socially efficacious writing published in the New-York Tribune. These editorialists reached
-
Directory of Open Access Journals (Sweden)
C. A. Acevedo-Triana
2017-01-01
Full Text Available Brain atlases are tools based on comprehensive studies used to locate biological characteristics (structures, connections, proteins, and gene expression in different regions of the brain. These atlases have been disseminated to the point where tools have been created to store, manage, and share the information they contain. This study used the data published by the Allen Mouse Brain Atlas (2004 for mice (C57BL/6J and Allen Human Brain Atlas (2010 for humans (6 donors to compare the expression of serotonin-related genes. Genes of interest were searched for manually in each case (in situ hybridization for mice and microarrays for humans, normalized expression data (z-scores were extracted, and the results were graphed. Despite the differences in methodology, quantification, and subjects used in the process, a high degree of similarity was found between expression data. Here we compare expression in a way that allows the use of translational research methods to infer and validate knowledge. This type of study allows part of the relationship between structures and functions to be identified, by examining expression patterns and comparing levels of expression in different states, anatomical correlations, and phenotypes between different species. The study concludes by discussing the importance of knowing, managing, and disseminating comprehensive, open-access studies in neuroscience.
-
DEFF Research Database (Denmark)
Rytter, Jens Elo
2010-01-01
The article surveys the historical and current meaning of "Freedom of the Press" in constitutional and human rights law. Two different conceptions exist, the narrow one defining freedom of the press as the freedom of every one to publish without prior restraint, the broader one defining it as a...... privileged freedom of the organised press to gather and report on information of public interest. These two conceptions have very different answers to the question of whether the press should enjoy some privilege to be exempt from ordinary legislation when such legislation restricts the access of the press to inform...
-
Automatic registration of imaging mass spectrometry data to the Allen Brain Atlas transcriptome
Abdelmoula, Walid M.; Carreira, Ricardo J.; Shyti, Reinald; Balluff, Benjamin; Tolner, Else; van den Maagdenberg, Arn M. J. M.; Lelieveldt, B. P. F.; McDonnell, Liam; Dijkstra, Jouke
2014-03-01
Imaging Mass Spectrometry (IMS) is an emerging molecular imaging technology that provides spatially resolved information on biomolecular structures; each image pixel effectively represents a molecular mass spectrum. By combining the histological images and IMS-images, neuroanatomical structures can be distinguished based on their biomolecular features as opposed to morphological features. The combination of IMS data with spatially resolved gene expression maps of the mouse brain, as provided by the Allen Mouse Brain atlas, would enable comparative studies of spatial metabolic and gene expression patterns in life-sciences research and biomarker discovery. As such, it would be highly desirable to spatially register IMS slices to the Allen Brain Atlas (ABA). In this paper, we propose a multi-step automatic registration pipeline to register ABA histology to IMS- images. Key novelty of the method is the selection of the best reference section from the ABA, based on pre-processed histology sections. First, we extracted a hippocampus-specific geometrical feature from the given experimental histological section to initially localize it among the ABA sections. Then, feature-based linear registration is applied to the initially localized section and its two neighbors in the ABA to select the most similar reference section. A non-rigid registration yields a one-to-one mapping of the experimental IMS slice to the ABA. The pipeline was applied on 6 coronal sections from two mouse brains, showing high anatomical correspondence, demonstrating the feasibility of complementing biomolecule distributions from individual mice with the genome-wide ABA transcriptome.
-
International Nuclear Information System (INIS)
Aparicio Arroyo, E.
1967-01-01
Requirements for some special nuclear engineering ceramic shapes are: big size, impervious, dimensional accuracy and good mechanical and dielectric properties. Limitations of te conventional methods and advantages of te hot pressing techniques for the manufacturing of these shapes are discussed. Hot pressing characteristics of a certain steatite powder are studied. Occurrence of an optimum densification temperature just above the tale decomposition range is found. Experimental data show that the height/diameter ratio of the specimen has no effect on the sintering conditions. Increasing darkness from the graphite mould is detected above the optimum temperature. The hot-pressed steatite is compared with a fired dry-pressed sample of the same composition. (Author) 13 refs
-
Mathematical modelling of wet paper pressing
Bežanovic, D.
2005-01-01
The aim of this project is to reduce energy costs in paper production by optimising the process in the press section of a paper machine. In this press section water is squeezed as it passes through the press nip. In a modern press section the moisture content of the sheet after three or four presses
-
Film Advertising in the Albanian Press before World War II
Directory of Open Access Journals (Sweden)
Vjollca Hysi Panajoti
2015-05-01
Full Text Available This paper aims at studying the development of film advertising in the 1930’s Albanian press. Through advertising we struggle to read a piece of the Albanian monarchy’s history. Considering advertising as a historical source tends to reflect the economic, social and cultural life of the country. The study focused on the features, characteristics and uniqueness of advertising the films in relation to other ads present in print. Who were the people who created the ads, how does the Albanian press film advertising compare to advertising in the foreign press and what were the difficulties facing advertising at this time, are the other important issues addressed in this study. Over a century has passed since Harper's Weekly wrote that 'advertisements are a reflection of real life, a kind of fossil by which chroniclers can rewrite history in order to complete the graphic, even if all other historical evidence may have disappeared.
-
Batool, Fiza; Akram, Ghazala
2018-05-01
An improved (G'/G)-expansion method is proposed for extracting more general solitary wave solutions of the nonlinear fractional Cahn-Allen equation. The temporal fractional derivative is taken in the sense of Jumarie's fractional derivative. The results of this article are generalized and extended version of previously reported solutions.
-
Testing the Alchian-Allen Theorem: A Study of Consumer Behavior in the Gasoline Market
Robert Lawson; Lauren Raymer
2006-01-01
This paper uses a data set of daily sales at a single gasoline station over a seven year period to determine if consumers respond to relative price changes among the three grades of gasoline. Based on the reasoning of Alchian and Allen (1964) and Barzel (1976), market shares of higher quality gasoline should increase at the expense of regular grade gasoline when overall gasoline prices increase. The empirical results do not conform to this expectation. We find instead that the consumers in th...
-
Poh, Jian-Siang; Makai, Szabolcs; von Keutz, Timo; Tran, Duc N; Battilocchio, Claudio; Pasau, Patrick; Ley, Steven V
2017-02-06
We report herein the asymmetric coupling of flow-generated unstabilized diazo compounds and propargylated amine derivatives, using a new pyridinebis(imidazoline) ligand, a copper catalyst and base. The reaction proceeds rapidly, generating chiral allenes in 10-20 minutes with high enantioselectivity (89-98 % de/ee), moderate yields and a wide functional group tolerance. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
-
Cognition About the Creative Process – Interview With Dr Andrew P. Allen
Directory of Open Access Journals (Sweden)
Andrew P. Allen
2016-11-01
Full Text Available What is the relationship between the creative process and cognition and perception? Lynda Loughnane, a master’s student in Art and Process in Crawford College of Art and Design, Cork, Ireland interviewed Dr Andrew P. Allen about the subject. Areas covered include mindfulness, Type 1 and Type 2 thinking, stage theories of creativity, engagement with the art process and the artwork, phenomenology and consciousness with and without self report. The interview was constructed to cover a wide range of subject matter, so as to gather as much information as possible in layman's language about the cognitive process in relation to creativity and interaction with art.
-
Siebert, Fred S.; And Others
A systematic understanding of the press requires an understanding of the social and political structures within which the press operates. This book discusses four theories that have determined the kind of press the Western world has had: authoritarian, libertarian, socially responsible, and Soviet communist. Each chapter discusses press…
-
Król, Karol
2013-01-01
WordPress 3.5 Complete: Third Edition is a comprehensive and step-by-step tutorial packed with screenshots and examples to make it easy and quick to pick it up.This WordPress book is a guide to WordPress for online publishers and web developers. If you are new to blogging and want to create your own blog or website from scratch, then ""WordPress 3.5 Complete: Third Edition"" is for you. No prior knowledge of HTML/CSS or PHP is required.
-
Inconsistent journalism: the coverage of chronic diseases in the Mexican press.
Mercado-Martinez, F J; Robles-Silva, L; Moreno-Leal, N; Franco-Almazan, C
2001-01-01
The mass media are recognized by many social scientists as important sources of medical information for lay people and as a positive influence on those working in the health care professions. However, there is a lack of study about print and mass media reporting on major health problems in developing countries such as Mexico. This article presents the findings of a study conducted to identify specific messages that the Mexican print media convey to the general reader about chronic diseases, especially one of the most important and pervasive, diabetes. We undertook a comprehensive review and content analysis of secondary source media reporting in the Boletin (Bulletin)--published by the Department of Education and Health, Universidad Autónoma Metropolitana, Xochimilco. The Boletin summarizes all articles related to health matters published in 12 national daily newspapers and 3 magazines. Our study covered all issues of the Boletin from 1992 through 1996. Our findings indicate that at times the press and popular print media disseminate an incomplete and often biased picture of chronic diseases prevalent in Mexico. Specifically, the press gives equal or more important coverage of acute diseases, or to AIDS, than to other major chronic conditions. The press also reproduces the biomedical model of disease and does not address topics important to certain segments of the population, including the patient. Moreover, the media may present an overly idealized impression of the capability of health services. Consequently, this failure to address the issues of certain widespread, chronic illnesses is severe enough to ask about the role of the press in medical health care reform. We conclude by suggesting areas for further research.
-
Energetic Proton Spectra Measured by the Van Allen Probes
Summers, Danny; Shi, Run; Engebretson, Mark J.; Oksavik, Kjellmar; Manweiler, Jerry W.; Mitchell, Donald G.
2017-10-01
We test the hypothesis that pitch angle scattering by electromagnetic ion cyclotron (EMIC) waves can limit ring current proton fluxes. For two chosen magnetic storms, during 17-20 March 2013 and 17-20 March 2015, we measure proton energy spectra in the region 3 ≤ L ≤ 6 using the RBSPICE-B instrument on the Van Allen Probes. The most intense proton spectra are observed to occur during the recovery periods of the respective storms. Using proton precipitation data from the POES (NOAA and MetOp) spacecraft, we deduce that EMIC wave action was prevalent at the times and L-shell locations of the most intense proton spectra. We calculate limiting ring current proton energy spectra from recently developed theory. Comparisons between the observed proton energy spectra and the theoretical limiting spectra show reasonable agreement. We conclude that the measurements of the most intense proton spectra are consistent with self-limiting by EMIC wave scattering.
-
Ion spectral structures observed by the Van Allen Probes
Ferradas, C.; Zhang, J.; Spence, H. E.; Kistler, L. M.; Larsen, B.; Reeves, G. D.; Skoug, R. M.; Funsten, H. O.
2015-12-01
During the last decades several missions have recorded the presence of dynamic spectral features of energetic ions in the inner magnetosphere. Previous studies have reported single "nose-like" structures occurring alone and simultaneous nose-like structures (up to three). These ion structures are named after the characteristic shapes of energy bands or gaps in the energy-time spectrograms of in situ measured ion fluxes. They constitute the observational signatures of ion acceleration, transport, and loss in the global magnetosphere. The HOPE mass spectrometer onboard the Van Allen Probes measures energetic hydrogen, helium, and oxygen ions near the inner edge of the plasma sheet, where these ion structures are observed. We present a statistical study of nose-like structures, using 2-years measurements from the HOPE instrument. The results provide important details about the spatial distribution (dependence on geocentric distance), spectral features of the structures (differences among species), and geomagnetic conditions under which these structures occur.
-
Crossed molecular beam study of the reaction O(3P) + allene
Schmoltner, A. M.; Huang, S. Y.; Brudzynski, R. J.; Chu, P. M.; Lee, Y. T.
1993-08-01
The reaction between ground state (3P) oxygen atoms and allene was studied under single collision conditions using the crossed molecular beams method. Product angular distributions and the translational energy distribution were determined for each channel. Two major reaction channels could be identified unambiguously: the formation of carbon monoxide and ethylene following oxygen atom attack on the central carbon atom, and the formation of allenyloxy (formyl-vinyl) radical and hydrogen atom following oxygen atom attack on the terminal carbon atom. In addition, at least one other reaction channel, which could be identified as the production of vinyl and formyl radicals, occurs. This channel involves the decomposition of acrolein which is formed by the addition of oxygen to the terminal carbon atom, followed by 1,2-hydrogen migration.
-
Smashing WordPress Beyond the Blog
Hedengren, Thord Daniel
2011-01-01
Smashing WordPress shows you how to utilize the power of the WordPress platform, and provides a creative spark to help you build WordPress-powered sites that go beyond the obvious. The second edition of Smashing WordPress has been updated for WordPress 3.1+, which includes internal, custom post types, the admin bar, and lots of other useful new features. You will learn the core concepts used to post types, the admin bar, and lots of other useful new features. You will learn the core concepts used to build just about anything in WordPress, resulting in fast deployments and greater design flexib
-
Smashing WordPress Beyond the Blog
Hedengren, Thord Daniel
2012-01-01
The ultimate guide to WordPress, from the world's most popular resource for web designers and developers As one of the hottest tools on the web today for creating a blog, WordPress has evolved to be much more that just a blogging platform and has been pushed beyond its original purpose. With this new edition of a perennially popular WordPress resource, Smashing Magazine offers you the information you need so you can maximize the potential and power of WordPress. WordPress expert Thord Daniel Hedengren takes you beyond the basic blog to show you how to leverage the capabilities of WordPress to
-
The press media and the risk perception
International Nuclear Information System (INIS)
Manetti, Cristiane Teixeira
2009-01-01
In this study it was identified the frequency of negative and positive news on the nuclear question in the press media. Due to the complexity of the matter, we opt to perform a study case that could illustrate the theoretical discussion presented in this research. Thus, due to the constant presence of news related to IPCC meeting, in the national and foreign press, we opt to focus our study on one year period just after the release of the 4th IPCC Report, in February of 2007. The research was centered only in the printed matters, since there is significant differences between the printed media and others, like TV, radio or web, restricting the use of the same bibliographical reference. In this study it was collected journalistic material involving the nuclear energy and was verified the predominant speech of the vehicles of communication and the sources of information. It was noted the predominance of positive articles, mainly due to the weight of the favorable speeches by authorities, cited as the most frequent in the paper. The negative approach almost always was assumed by the ONGs in general, as expected, due to the its well known position in the treatment of matters related to the nuclear energy. Also it is important to point out that all the tracked vehicles of information mixed positive and negative news articles on the subject; and evidences of hegemonic speech by official sources had been observed. (author)
-
Directory of Open Access Journals (Sweden)
Eileen Klink
2008-04-01
Full Text Available Material Covered: A compendium of events, people, places, and settings of the Thirties, this book offers information on: 1.chronology and impact of events on national and international levels–from the prelude to the Panic, September 3, 1929, through the outbreak of the war with Germany, September 3, 1939. 2.major political and business figures plus celebrities of the era–Hoover, Roosevelt, Hitler, Charles Lindbergh, Fred & Gracie Allen, etc. 3.influential organizations and unions. 4.statistical information and analysis. 5. day–to–day life—e.g., the books, magazines, and newspapers; films and radio programs; automobiles; fashions; the weather. Material Covered: A compendium of events, people, places, and settings of the Thirties, this book offers information on: 1.chronology and impact of events on national and international levels–from the prelude to the Panic, September 3, 1929, through the outbreak of the war with Germany, September 3, 1939. 2.major political and business figures plus celebrities of the era–Hoover, Roosevelt, Hitler, Charles Lindbergh, Fred & Gracie Allen, etc. 3.influential organizations and unions. 4.statistical information and analysis. 5. day–to–day life—e.g., the books, magazines, and newspapers; films and radio programs; automobiles; fashions; the weather.
-
Poh, Jian-Siang; Tran, Duc N; Battilocchio, Claudio; Hawkins, Joel M; Ley, Steven V
2015-06-26
A copper-catalyzed coupling reaction between flow-generated unstabilized diazo compounds and terminal alkynes provides di- and trisubstituted allenes. This extremely mild and rapid transformation is highly tolerant of several functional groups. © 2015 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.
-
MHD repowering of a 250 MWe unit of the TVA Allen Steam Plant
International Nuclear Information System (INIS)
Chapman, J.N.; Attig, R.C.
1992-01-01
In this paper coal fired MHD repowering is considered for the TVA Allen Steam Plant. The performance of the repowered plant is presented. Cost comparisons are made of the cost of repowering with MHD versus the cost of meeting similar standards by installing scrubbers and selective catalytic NO x reduction (SCNR). For repowering of a single 250 MW e unit, the costs favor scrubbing and SCNR. If one considers a single repowering of all three 250 MW e units by a single MHD topping cycle and boiler, MHD repowering is more economical. Environmental emissions from the repowered plant are estimated
-
The Inner Magnetosphere Plasma Response to Interplanetary Shocks: Van Allen Probes HOPE Observations
Winter, L. M.; Denton, M.; Ferradas, C.; Henderson, M. G.; Larsen, B.; Reeves, G.; Skoug, R. M.; Thomsen, M. F.
2017-12-01
The Van Allen Probes' Helium, Oxygen, Proton, and Electron (HOPE) sensors measure ion and electron populations in the plasmasphere, plasma sheet, and lower-energy ring current, providing unique observations at low energies (0.001-50 keV) and low L-shell (down to 1.5 RE). We use the capabilities of these two spacecraft to probe changes in the low energy particles in response to interplanetary (IP) shocks. We focus on changes in the plasma energies, composition, and pitch angle distributions following IP shocks and storm sudden commencements from 2012-2017 through a comparison of HOPE observations preceding and post shock.
-
Uribe, Brandon P; Coburn, Jared W; Brown, Lee E; Judelson, Daniel A; Khamoui, Andy V; Nguyen, Diamond
2010-04-01
The aim of this study was to examine the effects of a stable surface (bench) vs. an unstable surface (Swiss ball) on muscle activation when performing the dumbbell chest press and shoulder press. Sixteen healthy men (24.19 +/- 2.17 years) performed 1 repetition maximum (1RM) tests for the chest press and shoulder press on a stable surface. A minimum of 48 hours post 1RM, subjects returned to perform 3 consecutive repetitions each of the chest press and shoulder press at 80% 1RM under 4 different randomized conditions (chest press on bench, chest press on Swiss ball, shoulder press on bench, shoulder press on Swiss ball). Electromyography was used to assess muscle activation of the anterior deltoid, pectoralis major, and rectus abdominus. The results revealed no significant difference in muscle activation between surface types for either exercise. This suggests that using an unstable surface neither improves nor impairs muscle activation under the current conditions. Coaches and other practitioners can expect similar muscle activation when using a Swiss ball vs. a bench.
-
Nelson, Cory O; Sileo, Michael J; Grossman, Mark G; Serra-Hsu, Frederick
2008-08-01
The purpose of this study was to compare the time-zero biomechanical strength and the surface area of repair between a single-row modified Mason-Allen rotator cuff repair and a double-row arthroscopic repair. Six matched pairs of sheep infraspinatus tendons were repaired by both techniques. Pressure-sensitive film was used to measure the surface area of repair for each configuration. Specimens were biomechanically tested with cyclic loading from 20 N to 30 N for 20 cycles and were loaded to failure at a rate of 1 mm/s. Failure was defined at 5 mm of gap formation. Double-row suture anchor fixation restored a mean surface area of 258.23 +/- 69.7 mm(2) versus 148.08 +/- 75.5 mm(2) for single-row fixation, a 74% increase (P = .025). Both repairs had statistically similar time-zero biomechanics. There was no statistical difference in peak-to-peak displacement or elongation during cyclic loading. Single-row fixation showed a higher mean load to failure (110.26 +/- 26.4 N) than double-row fixation (108.93 +/- 21.8 N). This was not statistically significant (P = .932). All specimens failed at the suture-tendon interface. Double-row suture anchor fixation restores a greater percentage of the anatomic footprint when compared with a single-row Mason-Allen technique. The time-zero biomechanical strength was not significantly different between the 2 study groups. This study suggests that the 2 factors are independent of each other. Surface area and biomechanical strength of fixation are 2 independent factors in the outcome of rotator cuff repair. Maximizing both factors may increase the likelihood of complete tendon-bone healing and ultimately improve clinical outcomes. For smaller tears, a single-row modified Mason-Allen suture technique may provide sufficient strength, but for large amenable tears, a double row can provide both strength and increased surface area for healing.
-
40 CFR 63.821 - Designation of affected sources.
2010-07-01
...) National Emission Standards for the Printing and Publishing Industry § 63.821 Designation of affected... flexographic printing affected source. (7) Other presses are part of the printing and publishing industry...-flexographic presses are part of the printing and publishing industry source category, but are not part of the...
-
Investing in a Large Stretch Press
Choate, M.; Nealson, W.; Jay, G.; Buss, W.
1986-01-01
Press for forming large aluminum parts from plates provides substantial economies. Study assessed advantages and disadvantages of investing in large stretch-forming press, and also developed procurement specification for press.
-
Directory of Open Access Journals (Sweden)
Mostafa M.A. Khater
Full Text Available In this article and for the first time, we introduce and describe Khater method which is a new technique for solving nonlinear partial differential equations (PDEs.. We apply this method for each of the following models Bogoyavlenskii equation, couple Boiti-Leon-Pempinelli system and Time-fractional Cahn-Allen equation. Khater method is very powerful, Effective, felicitous and fabulous method to get exact and solitary wave solution of (PDEs.. Not only just like that but it considers too one of the general methods for solving that kind of equations since it involves some methods as we will see in our discuss of the results. We make a comparison between the results of this new method and another method. Keywords: Bogoyavlenskii equations system, Couple Boiti-Leon-Pempinelli equations system, Time-fractional Cahn-Allen equation, Khater method, Traveling wave solutions, Solitary wave solutions
-
AUPress: A Comparison of an Open Access University Press with Traditional Presses
McGreal, Rory; Chen, Nian-Shing
2011-01-01
This study is a comparison of AUPress with three other traditional (non-open access) Canadian university presses. The analysis is based on the rankings that are correlated with book sales on Amazon.com and Amazon.ca. Statistical methods include the sampling of the sales ranking of randomly selected books from each press. The results of one-way…
-
The Reporter's Privilege under Fire: Is the American Press Still Free?
West, Natalie
2009-01-01
The First Amendment's guarantee of an independent press that may freely collect and disseminate news is often considered the bedrock of American democracy. Yet more than a century and a half after the "New York Herald's" John Nugent became the first American reporter jailed for refusing to identify a confidential source, reporters…
-
Haydl, Alexander M; Xu, Kun; Breit, Bernhard
2015-06-08
The rhodium-catalyzed asymmetric N-selective coupling of pyrazole derivatives with terminal allenes gives access to enantioenriched secondary and tertiary allylic pyrazoles, which can be employed for the synthesis of medicinally important targets. The reaction tolerates a large variety of functional groups and labelling experiments gave insights into the reaction mechanism. This new methodology was further applied in a highly efficient synthesis of JAK 1/2 inhibitor (R)-ruxolitinib. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
-
Professional WordPress design and development
Williams, Brad; Stern, Hal
2014-01-01
The highest rated WordPress development and design book on the market is back with an all new third edition. Professional WordPress is the only WordPress book targeted to developers, with advanced content that exploits the full functionality of the most popular CMS in the world. Fully updated to align with WordPress 4.1, this edition has updated examples with all new screenshots, and full exploration of additional tasks made possible by the latest tools and features. You will gain insight into real projects that currently use WordPress as an application framework, as well as the basic usage a
-
'Combating' tropical diseases in the German colonial press.
Correa, Sílvio Marcus de Souza
2013-03-01
This article shows how much certain German language newspapers were a vehicule for reporting to the lay public on 'combating' tropical diseases. Through the press, immigrants and their descendents in Brazil were informed not only about the diseases which afflicted German colonists in Africa, but also about measures concerning sanitation, prophylaxis and experiments with tropical medicine, etc. Based on hemerographic sources, it shows how successful the overseas German communities were in sharing their experiences regarding health in tropical and/or sub-tropical regions.
-
FREEDOM OF SPEECH IN INDONESIAN PRESS: INTERNATIONAL HUMAN RIGHTS PERSPECTIVE
Directory of Open Access Journals (Sweden)
Clara Staples
2016-06-01
Full Text Available This paper will firstly examine the international framework of human rights law and its guidelines for safeguarding the right to freedom of speech in the press. Secondly, it will describe the constitutional and other legal rights protecting freedom of speech in Indonesia and assess their compatibility with the right to freedom of speech under the international human rights law framework. Thirdly it will consider the impact of Indonesia’s constitutional law and criminal and civil law, including sedition and defamation laws, and finally media ownership, on the interpretation and scope of the right to freedom of speech in the press. Consideration of these laws will be integrated with a discussion of judicial processes. This discussion will be used to determine how and in what circumstances the constitutional right to freedom of speech in the press may be facilitated or enabled, or on the other hand, limited, overridden or curtailed in Indonesia. Conclusions will then be drawn regarding the strengths and weaknesses of Indonesian laws in safeguarding the right to freedom of speech in the press and the democratic implications from an international human rights perspective. This inquiry will be restricted to Indonesian laws in existence during the post-New Order period of 1998 to the present, and to the information and analysis provided by English-language sources.
-
Lister, Tammie
2013-01-01
This book is a hands-on tutorial guide to using BuddyPress.This book is great for designers and developers who are looking to learn how to develop BuddyPress themes. It's assumed that the reader has some understanding of Wordpress and is familiar with CSS and HTML.
-
Directory of Open Access Journals (Sweden)
Jin Cheng
2018-01-01
Full Text Available In order to achieve high punching precision, good operational reliability and low manufacturing cost, the structural optimization of a high-speed press in the presence of a set of available alternatives comprises a heterogeneous multiple-attribute decision-making (HMADM problem involving deviation, fixation, cost and benefit attributes that can be described in various mathematical forms due to the existence of multi-source uncertainties. Such a HMADM problem cannot be easily resolved by existing methods. To overcome this difficulty, a new heterogeneous technique for order preference by similarity to an ideal solution (HTOPSIS is proposed. A new approach to normalization of heterogeneous attributes is proposed by integrating the possibility degree method, relative preference relation and the attribute transformation technique. Expressions for determining positive and negative ideal solutions corresponding to heterogeneous attributes are also developed. Finally, alternative structural configurations are ranked according to their relative closeness coefficients, and the optimal structural configuration can be determined. The validity and effectiveness of the proposed HTOPSIS are demonstrated by a numerical example. The proposed HTOPSIS can also be applied to structural optimization of other complex equipment, because there is no prerequisite of independency among various attributes for its application.
-
Conférence de presse | Press Conference
CERN. Geneva; Bejar Alonso, Isabel
2018-01-01
10:00-11:00 Conférence de presse en présence de Lucio Rossi, chef du projet LHC à Haute Luminosité et Isabel Bejar Alonso, chargée de la configuration, de la qualité et des ressources du projet LHC à Haute Luminosité.
-
Redesign of the SNS Modulator H-Bridge for Utilization of Press-Pack IGBTs
Energy Technology Data Exchange (ETDEWEB)
Kemp, Mark A.; Burkhart, Craig; /SLAC; Anderson, David E.; /Oak Ridge
2008-09-25
The power conversion group at SLAC is currently redesigning the H-bridge switch plates of the High Voltage Converter Modulators at the Spallation Neutron Source. This integral part to the modulator operation has been indentified as a source of several modulator faults and potentially limits reliability with pulse width modulation operation. This paper is a presentation of the design and implementation of a redesigned switch plate based upon press-pack IGBTs.
-
The colour of blood in skin: a comparison of Allen's test and photonics simulations.
Välisuo, Petri; Kaartinen, Ilkka; Kuokkanen, Hannu; Alander, Jarmo
2010-11-01
The colour of the skin reflects many physiological and pathological states of an individual. Usually, the skin colour is examined by the bare eye alone. Several scaling systems have been developed to quantify the sensory evaluation of skin colour. In this work, the reflectance of the skin is measured directly using an objective instrument. Haemoglobin inside the dermal circulation is one of the key factors of skin colour and it also has a major role in the appearance of many skin lesions and scars. To quantitatively measure and analyse such conditions, the relation between the skin colour and the haemoglobin concentration in the skin needs to be resolved. To examine the effect of blood concentration on the skin colour, five Allen's tests were performed on 20 persons. The skin colour change was measured using a spectrophotometer by changing the blood concentration by the Allen's test. Light interaction with the skin was simulated with a Monte Carlo model, tuning the blood concentration parameter until the simulated and the measured spectra matched, yielding the relationship between the skin colour and the blood concentration. The simulation produced spectra similar to those measured. The change in the blood concentration in the simulation model and in the skin produced changes similar to the spectra. The reflectance of the skin was found to be a nonlinear function of the blood concentration. The relationship found between skin colour and blood concentration makes it possible to quantify those skin conditions expressed by blood volume better than plain colour. © 2010 John Wiley & Sons A/S.
-
WordPress all-in-one for dummies
Sabin-Wilson, Lisa
2013-01-01
Top WordPress guide, now fully updated for the latest WordPress release! This updated new edition comprises one of the largest collections of practical intermediate to advanced information on WordPress. Fully updated for the latest WordPress release, this in-depth book covers it all, from setting up your software to publishing your site, using SEO and social media, developing and using plug-ins, running multiple sites with WordPress, and more. Veteran author Lisa Sabin-Wilson is a top authority on WordPress, and she and her co-authors pack this book with essential and easy-to-follo
-
Press to compress contaminated wastes drums
International Nuclear Information System (INIS)
Prevost, J.
1993-01-01
This patent describes a press for contaminated wastes drums pressing. The press is made of a structure comprising a base and an upper stringer bind to the base by vertical bearers, a compression system comprising a main cylinder and a ram, connected to the upper stringer
-
National Aeronautics and Space Administration — Press kit for ISS mission Expedition 08 from 10/2003-04/2004. Press kits contain information about each mission overview, crew, mission timeline, benefits, and media...
-
Expanded Analysis of Hot Isostatic Pressed Iodine-Loaded Silver-Exchanged Mordenite
Energy Technology Data Exchange (ETDEWEB)
Jubin, R. T. [ORNL; Bruffey, S. H. [ORNL; Patton, K. K. [ORNL
2014-09-30
Reduced silver-exchanged mordenite (Ag0Z) is being evaluated as a potential material to control the release of radioactive iodine that is released during the reprocessing of used nuclear fuel into the plant off-gas streams. The purpose of this study was to determine if hot pressing could directly convert this iodine loaded sorbent into a waste form suitable for long-term disposition. The minimal pretreatment required for production of pressed pellets makes hot pressing a technically and economically desirable process. Initial scoping studies utilized hot uniaxial pressing (HUPing) to prepare samples of non-iodine-loaded reduced silver exchanged mordenite (Ag0Z). The resulting samples were very fragile due to the low pressure (~ 28 MPa) used. It was recommended that hot isostatic pressing (HIPing), performed at higher temperatures and pressures, be investigated. HIPing was carried out in two phases, with a third and final phase currently underway. Phase I evaluated the effects of pressure and temperature conditions on the manufacture of a pressed sample. The base material was an engineered form of silver zeolite. Six samples of Ag0Z and two samples of I-Ag0Z were pressed. It was found that HIPing produced a pressed pellet of high density. Analysis of each pressed pellet by scanning electron microscopy-energy dispersive spectrophotometry (SEM-EDS) and X-ray diffraction (XRD) demonstrated that under the conditions used for pressing, the majority of the material transforms into an amorphous structure. The only crystalline phase observed in the pressed Ag0Z material was SiO2. For the samples loaded with iodine (I-Ag0Z) iodine was present as AgI clusters at low temperatures, and transformed into AgIO4 at high temperatures. Surface mapping and EDS demonstrate segregation between silver iodide phases and silicon dioxide phases. Based on the results of the Phase I study, an expanded test matrix was developed to examine the effects of multiple source materials, compositional
-
Uncertainty evaluation in the self-alignment test of the upper plate of a press
International Nuclear Information System (INIS)
Lourenço, Alexandre S; E Sousa, J Alves
2015-01-01
This paper describes a method to evaluate uncertainty of the self-alignment test of the upper plate of a press according to EN 12390-4:2000. The method, the algorithms and the sources of uncertainty are described
-
George Herbert Mead and the Allen controversy at the University of Wisconsin.
Cook, Gary A
2007-01-01
This essay uses previously unpublished correspondence of George Herbert Mead to tell the story of his involvement in the aftermath of a political dispute that took place at the University of Wisconsin during the years 1914-1915. It seeks thereby to clarify the historical significance of an article he published on this controversy in late 1915. Taken together with relevant information about the educational activities of William H. Allen of the New York Bureau of Municipal Research, Mead's correspondence and article throw helpful light upon his understanding of how an educational survey of a university should proceed; they also show how he went about the task of evaluating a failed attempt at such a survey. (c) 2007 Wiley Periodicals, Inc.
-
Void structure of O+ ions in the inner magnetosphere observed by the Van Allen Probes
Nakayama, Y.; Ebihara, Y.; Ohtani, S.; Gkioulidou, M.; Takahashi, K.; Kistler, L. M.; Tanaka, T.
2016-12-01
The Van Allen Probes Helium Oxygen Proton Electron instrument observed a new type of enhancement of O+ ions in the inner magnetosphere during substorms. As the satellite moved outward in the premidnight sector, the flux of the O+ ions with energy 10 keV appeared first in the energy-time spectrograms. Then, the enhancement of the flux spread toward high and low energies. The enhanced flux of the O+ ions with the highest energy remained, whereas the flux of the ions with lower energy vanished near apogee, forming what we call the void structure. The structure cannot be found in the H+ spectrogram. We studied the generation mechanism of this structure by using numerical simulation. We traced the trajectories of O+ ions in the electric and magnetic fields from the global magnetohydrodynamics simulation and calculated the flux of O+ ions in the inner magnetosphere in accordance with the Liouville theorem. The simulated spectrograms are well consistent with the ones observed by Van Allen Probes. We suggest the following processes. (1) When magnetic reconnection starts, an intensive equatorward and tailward plasma flow appears in the plasma lobe. (2) The flow transports plasma from the lobe to the plasma sheet where the radius of curvature of the magnetic field line is small. (3) The intensive dawn-dusk electric field transports the O+ ions earthward and accelerates them nonadiabatically to an energy threshold; (4) the void structure appears at energies below the threshold.
-
Model Checking the Logic of Allen's Relations Meets and Started-by is P^NP-Complete
Directory of Open Access Journals (Sweden)
Laura Bozzelli
2016-09-01
Full Text Available In the plethora of fragments of Halpern and Shoham's modal logic of time intervals (HS, the logic AB of Allen's relations Meets and Started-by is at a central position. Statements that may be true at certain intervals, but at no sub-interval of them, such as accomplishments, as well as metric constraints about the length of intervals, that force, for instance, an interval to be at least (resp., at most, exactly k points long, can be expressed in AB. Moreover, over the linear order of the natural numbers N, it subsumes the (point-based logic LTL, as it can easily encode the next and until modalities. Finally, it is expressive enough to capture the ω-regular languages, that is, for each ω-regular expression R there exists an AB formula Φ such that the language defined by R coincides with the set of models of Φ over N. It has been shown that the satisfiability problem for AB over N is EXPSPACE-complete. Here we prove that, under the homogeneity assumption, its model checking problem is Δ^p_2 = P^NP-complete (for the sake of comparison, the model checking problem for full HS is EXPSPACE-hard, and the only known decision procedure is nonelementary. Moreover, we show that the modality for the Allen relation Met-by can be added to AB at no extra cost (AA'B is P^NP-complete as well.
-
Bates, Marcia J.
2015-01-01
Allen Kent was a pioneer in many aspects of library and information science (LIS), and yet, as this author reads Kent's 1977 article, there is not much in it that has become ancient, irrelevant history. The questions he discusses are still alive in the discipline in 2014, whether it is called LIS (library and information science), information…
-
Bullying the media : Cultural and climato-economic readings of press repression versus press freedom
Van de Vliert, E.
Journalists and media assistants in many places are murdered, imprisoned, censored, threatened, and similarly harrassed. Here I document that, and explain why, there are three climato-economic niches of press repression versus press freedom as part of broader syndromes of national culture. A
-
Activation of Selected Core Muscles during Pressing
Directory of Open Access Journals (Sweden)
Thomas W. Nesser
2015-10-01
Full Text Available Introduction: Unstable surface training is often used to activate core musculature during resistance training. Unfortunately, unstable surface training is risky and leads to detraining. Purpose: The purpose of this study was to determine core muscle activation during stable surface ground-based lifts. Methods: Fourteen recreational trained and former NCAA DI athletes (weight 84.2 ± 13.3 kg; height 176.0 ± 9.5 cm; age 20.9 ± 2.0 years volunteered for participation. Subjects completed two ground-based lifts: overhead press and push-press. Surface EMG was recorded from 4 muscles on the right side of the body (Rectus Abdominus (RA, External Oblique (EO, Transverse Abdominus (TA, and Erector Spinae (ES. Results: Paired sample T-tests identified significant muscle activation differences between the overhead press and the push-press included ES and EO. Average and peak EMG for ES was significantly greater in push-press (P<0.01. Anterior displacement of COP was significantly greater in push-press compared to overhead press during the eccentric phase. Conclusion: The push-press was identified as superior in core muscle activation when compared to the overhead pressing exercise. Keywords: torso, stability, weight lifting, resistance training
-
O'Brien, T. P., III; Claudepierre, S. G.
2017-12-01
During geomagnetic storms, the Earth's outer radiation belt experiences enhanced radial transport. This transport occurs via phase-dependent radial displacements of particles, either by impulsive events or drift resonant waves. Because transport is phase dependent, it produces drift phase bunching, which can be observed with in situ particle detectors. We provide bounds on the radial diffusion coefficients derived from this drift phase structure as seen by NASA's Van Allen Probes. We compare these bounds to published radial diffusion coefficient models, particularly those derived independently from electromagnetic field observations.
-
International Nuclear Information System (INIS)
Schreiner, H.
1979-01-01
First, significance and advantages of sintered materials consisting of two layers are pointed out. By means of the two layer powder pressing technique metal powders are formed resulting in compacts with high accuracy of shape and mass. Attributes of basic powders, different filling methods and pressing techniques are discussed. The described technique is supposed to find further applications in the field of two layer compacts in the near future
-
Edlich, Richard F; Greene, Jill A; Long, William B
2006-01-01
Dr. Robert C. Allen was a gifted educator, as well as experienced ophthalmologist, who was a close personal friend of Dr. Edlich at the University of Virginia Health System. While serving on the faculty at the University of Virginia Health System, Dr. Allen proved to be a compassionate physician, who developed close personal relationships with the residents, faculty, and his patients. Dr. Allen was invited by Dr Edlich to be a member of the Editorial Board of the Journal of Long-Term Effects of Medical Implants. When Dr. Allen told Dr. Edlich that he had ocular melanoma in 2000, this news was a wake-up call to Dr. Edlich on the need to prevent skin cancer, as well as ocular melanoma. Empowered by this news, Dr. Edlich was honored to co-author four articles on skin cancer prevention, as well as the latest article focusing on prevention of ocular melanoma. The Ocular Melanoma Foundation (Richmond, VA (USA)) was founded in 2003 by Dr. Robert C. Allen to increase awareness, enhance education, and provide advocacy among both patients and health care professionals regarding this rare, but potentially lethal cancer. It has a website that provides patient information, up-to-date information and enables communication/ discourse between and among patients and practitioners (admin@ocularmelanoma.org). Dr. Allen died on March 24, 2005, at his home surrounded by family and loved ones. When surgeons are faced with challenging healthcare diseases, Dr. Edlich's mentor, Dr. Owen Wangensteen, advised Dr. Edlich that he should seek the advice and guidance of skilled basic scientists, who are familiar with the problem. Dr. Wangensteen is recognized as the greatest surgical teacher during the 20th century. Consequently, Dr. Edlich enlisted the advice and guidance from the two co-authors of the next article regarding the scientific basis for the selection of sunglasses to prevent the development of cataracts, pterygia, skin cancer, as well as ocular melanoma. Dr. Reichow is a Professor
-
Chip compacting press; Jido kirikuzu asshukuki
Energy Technology Data Exchange (ETDEWEB)
Oura, K. [Yuken Kogyo Co. Ltd., Kanagawa (Japan)
1998-08-15
The chips exhausted from various machine tools are massy, occupy much space and make working environment worse by staying added cutting oil to lower part. The chips are exhausted as a result of machining and have not constant quality. Even if used material is same the chips have various shapes and properties by kinds and machining methods of used machine tools, and are troublesome materials from a standpoint of their treatment. Pressing and solidification of the chips have frequently been tried. A chip compacting press introduced in this paper, a relatively cheap chip compacting press aimed for relatively small scale chip treatment, and has such characteristics and effects as follows. Chips are pressed and solidified by each raw material, so fractional management can be easily conducted. As casting metal chips and curled chips of iron and aluminum can be pressed to about 1/3 to 1/5 and about 1/40, respectively, space saving can be conducted. Chip compacting pressing upgrades its transporting efficiency to make possible to reduce its transporting cost. As chip solidification controls its oxidation and most cutting oil are removed, chips are easy to recycle. 2 figs., 1 tab.
-
Electron dropout echoes induced by interplanetary shock: Van Allen Probes observations
International Nuclear Information System (INIS)
Hao, Y. X.; Zong, Q.-G.; Zhou, X.-Z.; Fu, S. Y.; Rankin, R.
2016-01-01
On 23 November 2012, a sudden dropout of the relativistic electron flux was observed after an interplanetary shock arrival. The dropout peaks at ~1 MeV and more than 80% of the electrons disappeared from the drift shell. Van Allen twin Probes observed a sharp electron flux dropout with clear energy dispersion signals. The repeating flux dropout and recovery signatures, or “dropout echoes”, constitute a new phenomenon referred to as a “drifting electron dropout” with a limited initial spatial range. The azimuthal range of the dropout is estimated to be on the duskside, from ~1300 to 0100 LT. We then conclude that the shock-induced electron dropout is not caused by the magnetopause shadowing. Furthermore, the dropout and consequent echoes suggest that the radial migration of relativistic electrons is induced by the strong dusk-dawn asymmetric interplanetary shock compression on the magnetosphere.
-
Shielding of manned space stations against Van Allen Belt protons: a preliminary scoping study
International Nuclear Information System (INIS)
Santoro, R.T.; Alsmiller, R.G. Jr.; Barnes, J.M.; Corbin, J.M.
1986-09-01
Calculated results are presented to aid in the design of the shielding required to protect astronauts in a space station that is orbiting through the Van Allen proton belt. The geometry considered - a spherical shell shield with a spherical tissue phantom at its center - is only a very approximate representation of an actual space station, but this simple geometry makes it possible to consider a wide range of possible shield materials. Both homogeneous and laminated shields are considered. Also, an approximation procedure - the equivalent thickness approximation - that allows dose rates to be estimated for any shield material or materials from the dose rates for an aluminum shield is presented and discussed
-
WordPress web application development
Ratnayake, Rakhitha Nimesh
2013-01-01
An extensive, practical guide that explains how to adapt WordPress features, both conventional and trending, for web applications.This book is intended for WordPress developers and designers who have the desire to go beyond conventional website development to develop quality web applications within a limited time frame and for maximum profit. Experienced web developers who are looking for a framework for rapid application development will also find this to be a useful resource. Prior knowledge with of WordPress is preferable as the main focus will be on explaining methods for adapting WordPres
-
Professional WordPress Plugin Development
Williams, Brad; Tadlock, Justin
2011-01-01
Taking WordPress to the next level with advanced plugin developmentWordPress is used to create self-hosted blogs and sites, and it's fast becoming the most popular content management system (CMS) on the Web. Now you can extend it for personal, corporate and enterprise use with advanced plugins and this professional development guide. Learn how to create plugins using the WordPress plugin API: utilize hooks, store custom settings, craft translation files, secure your plugins, set custom user roles, integrate widgets, work with JavaScript and AJAX, create custom post types. You'll find a practic
-
Lischka, Juliane A; Stressig, J; Bünzli, F
2016-01-01
News value theory aims to predict a story’s chance of being selected for publication based on news factors and ascribed news values. News values can also predict the coverage of corporate press releases. For news decisions, a newspaper’s revenue model may force editors to consider whether the source of a press release is an advertising client, despite the ‘separation of church and state’. In addition, for business journalism, corporate press releases have become an increasingly important news...
-
De Paepe, Domien; Coudijzer, Katleen; Noten, Bart; Valkenborg, Dirk; Servaes, Kelly; De Loose, Marc; Diels, Ludo; Voorspoels, Stefan; Van Droogenbroeck, Bart
2015-04-15
In this study, advantages and disadvantages of the innovative, low-oxygen spiral-filter press system were studied in comparison with the belt press, commonly applied in small and medium size enterprises for the production of cloudy apple juice. On the basis of equivalent throughput, a higher juice yield could be achieved with spiral-filter press. Also a more turbid juice with a higher content of suspended solids could be produced. The avoidance of enzymatic browning during juice extraction led to an attractive yellowish juice with an elevated phenolic content. Moreover, it was found that juice produced with spiral-filter press demonstrates a higher retention of phenolic compounds during the downstream processing steps and storage. The results demonstrates the advantage of the use of a spiral-filter press in comparison with belt press in the production of a high quality cloudy apple juice rich in phenolic compounds, without the use of oxidation inhibiting additives. Copyright © 2014 Elsevier Ltd. All rights reserved.
-
Brasil Mulher e Nós Mulheres: Origins of the Feminist Press in Brazil
Directory of Open Access Journals (Sweden)
Rosalina de Santa Cruz Leite
2003-01-01
Full Text Available This article presents some reflections about the feminist alternative press that appeared in the state of São Paulo, Brazil, in the second half of the 70’s. The press was a space for expression of a special breed of politics that was closely linked to the awakening of women to feminist ideas in the period after the armed struggle against the Brazilian dictatorship. The journals Brasil Mulher and Nós Mulheres portray, in their articles and editorials, the fight for amnesty, for day nurseries, for democratic freedoms – all symbols of opposition against the regime in the era of military dictatorship. In addition they report on specific matters, such as, domestic violence, women’s working-conditions, reproductive rights, abortion and sexuality. From the point of view of the popular movement and the women’s organizations, the alternative press of women is without any doubt an important source, and still under-explored, for understanding the period considered.
-
Allen, Kate
2018-05-02
Kate Allen speaks to Roshaine Wijayatunga, Managing Commissioning Editor. Dr Kate Allen works as an Executive Director in Science and Public Affairs at World Cancer Research Fund International ( http://wcrf.org ), an NGO and leading authority in the field of cancer prevention through diet, weight and physical activity. Kate is responsible for the organization's scientific, policy and conference programs in the areas of food, nutrition, physical activity and weight management. An important aspect of her role is helping to create collaborative relationships and activities across the WCRF national charities (in Europe, America and Asia) in these areas, as well as maintaining and creating external partnerships. Previously, Kate worked at the Institute of Cancer Research, where she set up an award-winning Interactive Education Unit to develop learning materials for scientists, healthcare professionals, students, patients and the general public. Before that she worked at Medi Cine International, a medical education agency, where she developed educational materials across all media, mainly for specialist physician audiences. Kate has a PhD in neuroscience, carried out at the Institute of Neurology and the National Hospital for Neurology and Neurosurgery at Queen Square, London and the Royal College of Surgeons of England. The Third Expert Report that Kate mentions in the interview, featuring the updated World Cancer Research Fund Cancer Prevention Recommendations is launched 24 May 2018. For more information see http://wcrf.org .
-
Knudson, Duane
2016-01-01
This article from the 35th Dudley Allen Sargent Lecture addresses the importance of senior faculty in kinesiology providing holistic guidance to tenure-track faculty to foster excellence in the field. The importance of holistic mentoring of all three faculty roles in higher education is illustrated using research on teaching and learning…
-
Energy Technology Data Exchange (ETDEWEB)
Crepeau, M.; Khelifi, M.; Vanasse, A. [Laval Univ., Quebec City, PQ (Canada). Dept. of Soil Science and Agri-Food Engineering
2010-07-01
Corn is the main source for biofuel production in North America. However, both sweet pearl millet and sweet sorghum crops represent an interesting alternative to corn for ethanol production because of their high biomass yield under a wide range of environmental conditions and high concentration of readily fermentable sugars. Coproducts such as pressing residues can be also be utilized so that nothing is lost in the process. However, in order to improve the extraction of juice for ethanol production, the pressing process of this biomass must be optimized. Preliminary experiments were therefore conducted to optimize the juice extraction from sweet pearl millet and sweet sorghum using 2 different presses, notably a screw press and a manually operated hydraulic press. Both types of biomass were either chopped finely or coarsely and were exposed to various pressures with the hydraulic press. The volume of juice extracted from both crops increased linearly with increasing pressure. Sweet sorghum appeared to be a better feedstock for ethanol production because it produced about 0.03 to 0.06 litre of juice per kg of biomass more than sweet pearl millet. Juice extraction was more effective with the screw press, but only a small difference was noted between the 2 chopping modes.
-
Paradiplomacia y desarrollo económico en la región transfronteriza de Reynosa-McAllen
Nava Aguirre, Karla María; Córdova Bojórquez, Gustavo
2018-01-01
Resumen: La paradiplomacia es un nuevo fenómeno de participación internacional de gobiernos locales y otras entidades no-estatales. La investigación tiene como objetivo analizar la construcción paradiplomática y observar el desarrollo económico en la región transfronteriza Reynosa-McAllen a partir del Tratado de Libre Comercio de América del Norte (TLCAN). Se utilizó la investigación cualitativa con un enfoque descriptivo. Los instrumentos de recolección de información fueron la revisión bibl...
-
"Her mouth is medicine": Beth Brant and Paula Gunn Allen's decolonizing queer erotics.
Burford, Arianne
2013-01-01
This article asserts the need to recognize the complexity of the theoretical work of more lesbian Native American writers, focusing specifically Beth Brant (Bay of Quinte Mohawk) and Paula Gunn Allen (Laguna Pueblo). Their poetry and short stories provide a theoretically nuanced analysis of how heteronormativity is intertwined in and dependent on colonialism, and thus a methodology for Queer Theory that requires an understanding of it in relation to colonialism. They reject heteronormative Pocahontas fantasies about Native women, offering a lesbian-based tactic for decolonization through the expression of erotic desire. This article demonstrates the endless possibilities for fierce queer resistance, revolutionary change, and healing from the trauma of genocide and the accompanying colonialist heteropatriarchal disciplining of Native women's bodies.
-
Czech Academy of Sciences Publication Activity Database
Sigsbee, K.; Kletzing, C. A.; Smith, C. W.; MacDowall, R.; Spence, H.; Reeves, G.; Blake, J. B.; Baker, D. N.; Green, J. C.; Singer, H. J.; Carr, C.; Santolík, Ondřej
2016-01-01
Roč. 121, č. 3 (2016), s. 1990-2008 ISSN 2169-9380 Grant - others:AV ČR(CZ) AP1401 Program:Akademická prémie - Praemium Academiae Institutional support: RVO:68378289 Keywords : EMIC waves * ULF pulsations * electron flux dropouts * Dst effect * magnetopause shadowing * Van Allen Probes Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 2.733, year: 2016 http://onlinelibrary.wiley.com/doi/10.1002/2014JA020877/full
-
Ribeiro, Penha Patrícia Cabral; Silva, Denise Maria de Lima E; Assis, Cristiane Fernandes de; Correia, Roberta Targino Pinto; Damasceno, Karla Suzanne Florentino da Silva Chaves
2017-01-01
To the best of our knowledge, this is the first report in the literature concerning the bioactive properties of faveleira products. This work focuses on the physicochemical evaluation of faveleira oil, as well as it investigates the bioactive properties of faveleira seeds, faveleira oil and the press cake obtained during the oilseed processing. The seeds were cold pressed and the following tests were performed: physicochemical characteristics (acidity, peroxide values, moisture and volatile matter, density and viscosity) and fatty acid profile of faveleira oil; total phenolic and flavonoid content of faveleira seed and press cake; antibacterial activity of seed, oil and press cake; and antioxidant activity (DPPH radical scavenging activity, reducing power assay, total antioxidant capacity, superoxide radical scavenging assay and oxygen radical absorbance capacity) of seed, oil and press cake. Our work demonstrated that the faveleira seed oil has low acidity (0.78 ± 0.03% oleic acid) and peroxide value (1.13 ± 0.12 mEq/1000g), associated with the relevant concentration of linoleic acid (53.56%). It was observed that important phenolics (398.89 ± 6.34 mg EAG/100 g), especially flavonoids (29.81 ± 0.71 mg RE/g) remain in the press cake, which indicates that the by-product of the faveleira oilseed production constitutes a rich residual source of bioactive compounds. No bacterial growth inhibition was detected, but all samples including faveleira seeds, press cake, oil and its fractions have potent antioxidant activities, mainly the press cake, with oxygen radical absorbance capacity of 28.39 ± 4.36 μM TE/g. Our results also show that faveleira oil has potential to be used as edible oil and the press cake should be used to contain the most antioxidants from seed.
-
Uncritical and unbalanced coverage of synthetic biology in the Nordic press.
Ancillotti, Mirko; Holmberg, Niklas; Lindfelt, Mikael; Eriksson, Stefan
2017-02-01
Synthetic biology will probably have a high impact on a variety of fields, such as healthcare, environment, biofuels, agriculture, and so on. A driving theme in European research policy is the importance of maintaining public legitimacy and support. Media can influence public attitudes and are therefore an important object of study. Through qualitative content analysis, this study investigates the press coverage of synthetic biology in the major Nordic countries between 2009 and 2014. The press coverage was found to be event-driven and there were striking similarities between countries when it comes to framing, language use, and treated themes. Reporters showed a marked dependence on their sources, mainly scientists and stakeholders, who thus drives the media agenda. The media portrayal was very positive, with an optimistic look at future benefits and very little discussion of possible risks.
-
Precision Force Control for an Electro-Hydraulic Press Machine
Directory of Open Access Journals (Sweden)
Hong-Ming Chen
2014-08-01
Full Text Available This thesis is primarily intended to design a PC-based control system to control the force of an electro-hydraulic servo press system for implementing precision force control. The main feature is to develop a composite control by using the relief valve and the flow servo valve. Using feedback from a force sensor, a fuzzy controller was designed with LabVIEW software as the system control core for achieving a precision force control for the hydraulic cylinder on its travel and output. The weakness of hydraulic systems is that hydraulic oil is compressible and prone to leaking, and its characteristics can vary with oil temperature, thus making it difficult for a general linear controller to achieve accurate control. Therefore, a fuzzy controller was designed with LabVIEW along with a NI-PCI_6221 interface card and a load cell to control the servo valve flow and the relief valve to control the pressure source. The testing results indicate that accurate force control output of an electro-hydraulic servo press system can be obtained.
-
Indre spenninger og ytre press
DEFF Research Database (Denmark)
Ibsen, Bjarne
2011-01-01
Anmeldelse af bogen 'Norsk idrett. Indre spenninger og ytre press' redigeret af Dag Vidar Hanstad, Gunnar Breivik, Mari Kristin Sisjord og Hans B. Skaset og udgivet af forlaet akilles.......Anmeldelse af bogen 'Norsk idrett. Indre spenninger og ytre press' redigeret af Dag Vidar Hanstad, Gunnar Breivik, Mari Kristin Sisjord og Hans B. Skaset og udgivet af forlaet akilles....
-
When Harry met Zuckerman: self-reflexivity and metafiction in Philip Roth and Woody Allen
Directory of Open Access Journals (Sweden)
Thomás Creus
2006-04-01
Full Text Available The objective of this essay is to compare the works of novelist Philip Roth and film-maker Woody Allen in what regards their treatment of the highly complex theme of the interrelations between fiction and reality. A comparative analysis of selected Roth’s novels and Allen’s films evinces their recurrent preoccupation with the creation of art and its implications, be it through the choice of writers or artists as main characters, be it through plots that mix real facts with invented ones and imaginary characters with real ones, be it through the use of autobiographical elements in a fictional discourse—all metafictional devices that call attention to the artist’s own process of creation.
-
Shreves, Ric
2011-01-01
This is a Packt Cookbook, which means it contains step-by-step instructions to achieve a particular goal or solve a particular problem. There are plenty of screenshots and explained practical tasks to make comprehension quick and easy. This book is not specifically for developers or programmers; rather it can be used by anyone who wants to get more out of their WordPress blog by following step-by-step instructions. A basic knowledge of PHP/XHTML/CSS/WordPress is desirable but not necessary.
-
WordPress all-in-one for dummies
Sabin-Wilson, Lisa; Palmer, Kevin
2011-01-01
A convenient how-to guide for maximizing your WordPress experience. WordPress is a state-of-the-art blog publishing platform with nearly ten million active installations. Eight minibooks provide you with expanded coverage of the most important topics to the WordPress community, such as WordPress basics, theme designs, plug-in development, social media integration, SEO, customization, and running multiple sites. Veteran author Lisa Sabin-Wilson leads an authoritative team of authors who offer their unique knowledge and skillset while sharing invaluable advice for maximizing your site's potentia
-
Effect of hot pressing additives on the leachability of hot pressed sodium hydrous titanium oxide
International Nuclear Information System (INIS)
Valentine, T.M.; Sambell, R.A.J.
1980-01-01
Sodium hydrous titanium oxide is an ion exchange resin which can be used for immobilizing medium level waste (MLW) liquors. When hot pressed, it undergoes conversion to a ceramic. Three low melting point materials (borax, bismuth trioxide, and a mixture of PbO/CuO) were added to the (Na)HTiO and the effect that each of these had on aiding densification was assessed. Hot pressing temperature, applied pressure, and percentage addition of hot pressing aid were varied. Percentage open porosity, flexural strength, and leachability were measured. There was a linear relationship between the percentage open porosity and the logarithm of the leach rate for a constant percentage addition of each additive
-
Film Advertising in the Albanian Press before World War II
Vjollca Hysi Panajoti; Mirdaim Axhami; Loreta Zela Axhami
2015-01-01
This paper aims at studying the development of film advertising in the 1930’s Albanian press. Through advertising we struggle to read a piece of the Albanian monarchy’s history. Considering advertising as a historical source tends to reflect the economic, social and cultural life of the country. The study focused on the features, characteristics and uniqueness of advertising the films in relation to other ads present in print. Who were the people who created the ads, how does the ...
-
Online Sources for Competitor Information.
Weiss, Arthur
Competitor information gathering is a key aspect of business planning. Information can be collected from either published or unpublished sources. Unpublished information will often be verified based on material from published sources. Published information is more likely to be factual and includes financial, stockmarket, press, market and…
-
SETI OBSERVATIONS OF EXOPLANETS WITH THE ALLEN TELESCOPE ARRAY
Energy Technology Data Exchange (ETDEWEB)
Harp, G. R.; Richards, Jon; Tarter, Jill C.; Dreher, John; Jordan, Jane; Shostak, Seth; Smolek, Ken; Kilsdonk, Tom; Wilcox, Bethany R.; Wimberly, M. K. R.; Ross, John; Barott, W. C.; Ackermann, R. F.; Blair, Samantha [SETI Institute, Mountain View, CA 94043 (United States)
2016-12-01
We report radio SETI observations on a large number of known exoplanets and other nearby star systems using the Allen Telescope Array (ATA). Observations were made over about 19000 hr from 2009 May to 2015 December. This search focused on narrowband radio signals from a set totaling 9293 stars, including 2015 exoplanet stars and Kepler objects of interest and an additional 65 whose planets may be close to their habitable zones. The ATA observations were made using multiple synthesized beams and an anticoincidence filter to help identify terrestrial radio interference. Stars were observed over frequencies from 1 to 9 GHz in multiple bands that avoid strong terrestrial communication frequencies. Data were processed in near-real time for narrowband (0.7–100 Hz) continuous and pulsed signals with transmitter/receiver relative accelerations from −0.3 to 0.3 m s{sup −2}. A total of 1.9 × 10{sup 8} unique signals requiring immediate follow-up were detected in observations covering more than 8 × 10{sup 6} star-MHz. We detected no persistent signals from extraterrestrial technology exceeding our frequency-dependent sensitivity threshold of 180–310 × 10{sup −26} W m{sup −2}.
-
Alcohol and the young: how does the press face the problem?
Directory of Open Access Journals (Sweden)
Diego Concina
2013-10-01
Full Text Available Background: alcohol is an important component of the Mediterranean diet and its moderate use is protective against cardiovascular risk. Binge drinking, i.e. the heavy consumption of alcohol over a short period of time, is the main consumption pattern of young people in Western countries and may lead to severe toxic effects in many organs. Mass media often address the issue by suggesting prevention measures; however, they may also have the unintended effect of encouraging alcohol misuse. This study aims to assess how the Italian press faces excessive alcohol consumption in young people, comparing the messages given by the press with scientific recommendations.Methods: articles published by the 6 best-selling Italian newspapers and the 4 best-selling Italian magazines were collected from October 15th to November 14th 2009. Medline database, governmental and non-governmental sources were searched for scientific recommendations regarding primary prevention of alcohol misuse. Press articles were described and analysed by filling out a predefined form.Results: fourteen newspaper articles regarding alcohol were found, 79% belonging to the news section. Six quotations of scientific recommendations were found: two about drink-driving, two about raising public awareness, one about Monitoring and Evaluation, and one about community and workplace action.Conclusions: scientific recommendations were often inadequately reported by the Italian press. The most covered recommendations, designed driver and public educational intervention, are also the least effective according to international literature. Therefore, a further effort is needed to tackle this issue in a more scientifically sound way.
-
Pellet presses for remote fuel fabrication
International Nuclear Information System (INIS)
Densley, P.J.
1978-01-01
Two types of mechanical presses are being tested from the remote operation and remote maintenance aspects. Results will be used to recommend the type of press and design considerations required for operation in a remotely operated and maintained process line
-
Energy Technology Data Exchange (ETDEWEB)
Abedinzadeh, Reza; Safavi, Seyed Mohsen; Karimzadeh, Fathallah [Isfahan University, Isfahan (Iran, Islamic Republic of)
2016-05-15
Bulk Al/4wt-%Al{sub 2}O{sub 3} nanocomposites were prepared by consolidating nanocomposite powders using pressureless microwave sintering, microwave-assisted hot press sintering and conventional hot pressing techniques. Microstructural observations revealed that the microwave-assisted hot press sintering at different sintering temperatures of 400.deg.C and 500.deg.C resulted in more densification and smaller grain size for Al/Al{sub 2}O{sub 3} nanocomposite as compared with the conventional hot pressing. Moreover, the application of pressure in microwave sintering process led to more densification and grain growth. Mechanical properties resulting from microhardness and nanoindentation tests were also compared between three-method processed samples. It was found that the microwave-assisted hot-pressed sample exhibited higher hardness and elastic modulus in comparison with microwave-sintered and conventional hot-pressed samples. The improvement in the mechanical properties can be ascribed to lower porosity of microwave-assisted hot-pressed sample.
-
Conference/debate on nuclear power. Press file
International Nuclear Information System (INIS)
1998-01-01
This press dossier presents in a digest way the advantages of nuclear power with respect to other energy sources. After a presentation of the worldwide energy resources (electric power demand, fossil-fuel reserves, renewable energies, environmental constraints), the dossier describes the functioning principle of a PWR reactor as a presentation of the French nuclear program (historical aspects, policy, organization of activities, trade, EPR project). In the last part, the sociological aspects of nuclear power are approached: environmental aspects (natural radioactivity, reactors safety, radioactive wastes, environment protection, carbon dioxide and energy production), and public health aspects (principles of radioactivity, dose effects, industrial and scientific applications of radionuclides, nuclear controversy, reactor accidents, legal aspects of radioprotection, safety standards and controls). (J.S.)
-
International Nuclear Information System (INIS)
Ko, Y.G.; Lee, Y.H.; Jung, W.S.; Shin, D.H.; Lee, C.S.
2003-01-01
The effects of pressing temperature and initial microstructure on the equal channel angular (ECA) pressing of Ti-6Al-4V alloy were investigated in this study. The ECA pressing was carried out isothermally with route C at 500 C, 600 C and 700 C for two typical microstructures, i.e., the Widmanstaetten microstructure and the equiaxed microstructure. The results showed that ECA pressing at 600 C and 700 C was successful without producing any noticeable segment at the specimen surfaces, while a large amount of surface segments were produced at 500 C. After 1 pass pressing at 600 C, the equiaxed microstructure showed more uniform material flow at the surface than the Widmanstaetten microstructure. However, this microstructural influence was diminished with increase of the number of the ECA pressing. A flow-localization parameter that quantifies the flow non-uniform tendency in case of flow softening materials was used to explain the different results in each microstructure. (orig.)
-
Idealized Compression Ratio for a Screw Briquetting Press
Directory of Open Access Journals (Sweden)
Peter Biath
2012-01-01
Full Text Available This paper deals with issues in determining the ideal compression ratio for a screw briquetting press. First, the principles of operation and a basic description of the main parts of a screw briquetting press are introduced. The next section describes the pressing space by means of 3D software. The pressing space was created using a Boolean subtract function. The final section of the paper measures the partial volumes of the pressing chamber in CATIA V5 by function of measuring. The measured values are substituted into the formula for the compression ratio, and the resulting evaluations are presented in the diagram in the conclusion of this paper.
-
Teach yourself visually complete WordPress
Majure, Janet
2013-01-01
Take your WordPress skills to the next level with these tips, tricks, and tasks Congratulations on getting your blog up and running with WordPress! Now are you ready to take it to the next level? Teach Yourself VISUALLY Complete WordPress takes you beyond the blogging basics with expanded tips, tricks, and techniques with clear, step-by-step instructions accompanied by screen shots. This visual book shows you how to incorporate forums, use RSS, obtain and review analytics, work with tools like Google AdSense, and much more.Shows you how to use mobile tools to edit a
-
Fracking in the UK press: Threat dynamics in an unfolding debate
Jaspal, Rusi; Nerlich, Brigitte
2014-01-01
Shale gas is a novel source of fossil fuel which is extracted by induced hydraulic fracturing, or “fracking.” This article examines the the socio-political dimension of fracking as manifested in the UK press at three key temporal points in the debate on the practice. Three newspaper corpora were analysed qualitatively using Thematic Analysis and Social Representations Theory. Three overarching themes are discussed: “April-May 2011: From Optimism to Scepticism”; “November 2011: ...
-
Wenlong Wang; Douglas J. Gardner; Melissa G.D. Baumann
2002-01-01
In previous research, it was shown that decreasing either press temperature or press time generally resulted in decreased volatile organic compound (VOC) emissions during the hot-pressing of southern pine particleboard. However, because it is impossible to reduce both pressing time and temperature while maintaining panel physical and mechanical properties, this study...
-
Schneider, Omar; Neto, Amarílio Ferreira; da Silva Mello, André; dos Santos, Wagner; Votre, Sebastião Josué; Assunção, Wallace Rocha
2016-01-01
This study investigates the American presence and influences in the physical education press to understand the way in which that presence influenced and contributed to the production of a sports culture in the first half of the twentieth century. As historical sources, the study uses periodicals in the field that were published in the period…
-
Rir Por Quê? ironia e pensamento, vida e morte em Kierkegaard e Woody Allen
Directory of Open Access Journals (Sweden)
ACSELRAD, Marcio
2009-06-01
Full Text Available The studies on humor and laughter have been growing in the past few years. Adored and divinized in ancient Greece, humor was later banished from the field of thought in Greece and, later on, with a modernity so serious and scientific. Nowadays it is being revisited strongly. The goal of the present article is to try and understand the phenomenon in recent times, mainly from the end of the nineteen century on, more specifically after Nietzsche and Kierkegaard have laid eyes upon the subject of irony. We intend to work both the philosophical and the communicational aspects, showing how they are bonded. We shall also use the cinema of Woody Allen to exemplify our main ideas.
-
WordPress web design for dummies
Sabin-Wilson, Lisa
2013-01-01
Updated, full-color guide to creating dynamic websites with WordPress 3.6 In this updated new edition, bestselling For Dummies author and WordPress expert Lisa Sabin-Wilson makes it easy for anyone with a basic knowledge of the WordPress software to create a custom site using complementary technologies such as CSS, HTML, PHP, and MySQL. You'll not only get up to speed on essential tools and technologies and further advance your own design skills, this book also gives you pages of great case studies, so you can see just how other companies and individuals are creating compelling, customized, a
-
Turner, D. L.; Fennell, J. F.; Blake, J. B.; Claudepierre, S. G.; Clemmons, J. H.; Jaynes, A. N.; Leonard, T.; Baker, D. N.; Cohen, I. J.; Gkioulidou, M.; Ukhorskiy, A. Y.; Mauk, B. H.; Gabrielse, C.; Angelopoulos, V.; Strangeway, R. J.; Kletzing, C. A.; Le Contel, O.; Spence, H. E.; Torbert, R. B.; Burch, J. L.; Reeves, G. D.
2017-11-01
This study examines multipoint observations during a conjunction between Magnetospheric Multiscale (MMS) and Van Allen Probes on 7 April 2016 in which a series of energetic particle injections occurred. With complementary data from Time History of Events and Macroscale Interactions during Substorms, Geotail, and Los Alamos National Laboratory spacecraft in geosynchronous orbit (16 spacecraft in total), we develop new insights on the nature of energetic particle injections associated with substorm activity. Despite this case involving only weak substorm activity (maximum AE energy wave activity is also established from Van Allen Probes and MMS. Drift mapping using a simplified magnetic field model provides estimates of the dispersionless injection boundary locations as a function of universal time, magnetic local time, and L shell. The analysis reveals that at least five electron injections, which were localized in magnetic local time, preceded a larger injection of both electrons and ions across nearly the entire nightside of the magnetosphere near geosynchronous orbit. The larger ion and electron injection did not penetrate to L < 6.6, but several of the smaller electron injections penetrated to L < 6.6. Due to the discrepancy between the number, penetration depth, and complexity of electron versus ion injections, this event presents challenges to the current conceptual models of energetic particle injections.
-
International Nuclear Information System (INIS)
Lu, Erli; Tuna, Floriana; Kaltsoyannis, Nikolas; Liddle, Stephen T.; Lewis, William
2016-01-01
We report uranium(IV)-carbene-imido-amide metalla-allene complexes [U(BIPM"T"M"S)(NCPh_3)(NHCPh_3)(M)] (BIPM"T"M"S=C(PPh_2NSiMe_3)_2; M=Li or K) that can be described as R_2C=U=NR' push-pull metalla-allene units, as organometallic counterparts of the well-known push-pull organic allenes. The solid-state structures reveal that the R_2C=U=NR' units adopt highly unusual cis-arrangements, which are also reproduced by gas-phase theoretical studies conducted without the alkali metals to remove their potential structure-directing roles. Computational studies confirm the double-bond nature of the U=NR' and U=CR_2 interactions, the latter increasingly attenuated by potassium then lithium when compared to the hypothetical alkali-metal-free anion. Combined experimental and theoretical data show that the push-pull effect induced by the alkali metal cations and amide auxiliary gives a fundamental and tunable structural influence over the C=U"I"V=N units. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)
-
Searching for a Free Press in Indian Country.
Benton, Sherrole
1994-01-01
Describes the tribally controlled media's efforts to provide a form of checks and balances against the tribal council on behalf of the tribal community. Examines the issue of freedom of the tribal press, suggesting that tribal council's control of press's operating funds may limit press freedom. (MAB)
-
Graphic Arts: Book Three. The Press and Related Processes.
Farajollahi, Karim; And Others
The third of a three-volume set of instructional materials for a graphic arts course, this manual consists of nine instructional units dealing with presses and related processes. Covered in the units are basic press fundamentals, offset press systems, offset press operating procedures, offset inks and dampening chemistry, preventive maintenance…
-
Properties of hot pressed MgB2/Ti tapes
International Nuclear Information System (INIS)
Kovac, P.; Husek, I.; Melisek, T.; Fedor, J.; Cambel, V.; Morawski, A.; Kario, A.
2009-01-01
Hot axial and hot isostatic pressing was applied for single-core MgB 2 /Ti tapes. Differences in transport current density, n-exponents and critical current anisotropy are discussed and related to the grain connectivity influenced by pressing. The magnetic Hall probe scanning measurements allowed observing the isolated regions for axially hot pressed sample attributed to the longitudinally oriented cracks introduced by pressing. The highest current densities were measured for the tape subjected to hot isostatic pressing due to improved connectivity.
-
Rossmann, Constanze; Meyer, Lisa; Schulz, Peter J
2018-02-01
In the aftermath of the A/H1N1 pandemic, health authorities were criticized for failures in crisis communication efforts, and the media were accused of amplifying the pandemic. Considering these criticisms, A/H1N1 provides a suitable case for examining risk amplification processes that may occur in the transfer of information from press releases to print news media during a health crisis. We integrated the social amplification of risk framework with theories of news decisions (news values, framing) in an attempt to contribute to existing research both theoretically and empirically. We conducted a quantitative content analysis of press releases disseminated by health and governmental authorities, as well as the quality and tabloid press in 10 European countries between March 2009 and March 2011. Altogether 243 press releases, 1,243 quality press articles, and 834 tabloid press articles were coded. Consistent with research on news values and framing the results suggest that quality and tabloid papers alike amplified A/H1N1 risks by emphasizing conflict and damage, presenting information in a more dramatized way, and using risk-amplifying frames to a greater extent and risk-attenuating frames to a lesser extent than press releases. To some extent, the quality and tabloid press differed in how risk information was presented. While tabloid press articles seemed to follow the leading quality press with regards to content and framing of health crisis coverage, they exhibited a stronger emphasis on drama and emotion in the way they presented information. © 2017 Society for Risk Analysis.
-
subscriptions Videos Photos Live Webcast Social Media Facebook @oasofficial Facebook Twitter @oas_official Social Media Facebook Twitter Newsletters Press and Communications Department Contact us at: +1 (202) 370 Rights Actions against Corruption C Children Civil Registry Civil Society Contact Us Culture Cyber
-
Defense Security Service, U.S. Department of Defense Site Map | A-Z Index | Facebook | Twitter Locations Press Room Organizational Structure Careers at DSS Doing Business with DSS Frequently Asked Classification System (NCCS) National Industrial Security System (NISS) ODAA Business Management System (OBMS
-
PRESS FREEDOM IN SINGAPORE AND MALAYSIA: DEFAMATION
Georgia Kate Chapman
2015-01-01
This paper focuses on the arguments around restriction on freedom of the press in the Strong States of Singapore and Malaysia. It assesses the presence of constraints on press freedoms in democratic western countries imposed by corporation rather than state and the similar effects that these constraints may have on bias present in publicly accessible news reporting. It argues that independence of the press does not just require protection from legal and executive regulation, but also protecti...
-
Teenagers as Victims in the Press
Andersson, Gunvor; Lundstrom, Tommy
2007-01-01
Research into press reporting on young people has tended to concentrate on young people as offenders. In contrast, this article focuses on press coverage of teenagers as victims. Reports in two Swedish newspapers (a morning broadsheet and an evening tabloid) were studied over a period of four months and subjected to a qualitative analysis of…
-
Czech Academy of Sciences Publication Activity Database
Hartley, D. P.; Kletzing, C. A.; Kurth, W. S.; Hospodarsky, G. B.; Bounds, S. R.; Averkamp, T. F.; Bonnell, J. W.; Santolík, Ondřej; Wygant, J. R.
2017-01-01
Roč. 122, č. 4 (2017), s. 4420-4429 ISSN 2169-9380 R&D Projects: GA MŠk(CZ) LH15304 Grant - others:AV ČR(CZ) AP1401 Program:Akademická prémie - Praemium Academiae Institutional support: RVO:68378289 Keywords : antenna sheath impedance * electric field * Van Allen Probes * EFW * EMFISIS * whistler mode waves Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 2.733, year: 2016 http://onlinelibrary.wiley.com/doi/10.1002/2016JA023597/abstract
-
Development of a hull-less pumpkin (Cucurbita pepo L.) seed oil press-cake spread.
Radočaj, Olga; Dimić, Etelka; Vujasinović, Vesna
2012-09-01
A stable, oil-based spread rich in the omega-3 (ω-3) and omega-6 (ω-6) fatty acids was developed using a hull-less pumpkin seed (Cucurbita pepo L.) oil press-cake, a by-product of the pumpkin oil pressing process, along with cold-pressed hemp oil. Response surface methodology (RSM) was applied to investigate the effects of two factors, as the formulation's compositional variables: a commercial stabilizer (X(1) ) and cold-pressed hemp oil (X(2) ) added to the pumpkin seed oil press-cake in the spread formulations. A central composite, 2-factorial experimental design on 5 levels was used to optimize the spreads where model responses were ω-3 fatty acids content, spreadability (hardness), oil separation, and sensory evaluation. The selected responses were significantly affected by both variables (P spreads resembled commercial peanut butter, both in appearance, texture and spreadability; were a source of ω-3 fatty acids and with no visual oil separation after 1 mo of storage. An optimum spread was produced using 1.25% (w/w) of stabilizer and 80% of hemp oil (w/w, of the total added oil) which had 0.97 g of ω-3 fatty acids per serving size; penetration depth of 68.4 mm; oil separation of 9.2% after 3 mo of storage; and a sensory score of 17.5. A use of by-products generated from different food processing technologies, where the edible waste is successfully incorporated as a value-added ingredient, has become a very important area of research to support global sustainability efforts. This study contributes to the knowledge of a product design process for oil-based spread development, where oil press-cake, a by-product of the oil pressing process of the naked pumpkin seeds, was used and where results have demonstrated that a new product can be successfully developed and potentially manufactured as a functional food. © 2012 Institute of Food Technologists®
-
Hot pressing of B4C/SiC composites
International Nuclear Information System (INIS)
Sahin, F.C.; Turhan, E.; Yesilcubuk, S.A.; Addemir, O.
2005-01-01
B 4 C/SiC ceramic composites containing 10-20-30 vol % SiC were prepared by hot pressing method. The effect of SiC addition and hot pressing temperature on sintering behaviour and mechanical properties of hot pressed composites were investigated. Microstructures of hot pressed samples were examined by SEM technique. Three different temperatures (2100 deg. C, 2200 deg. C and 2250 deg. C) were used to optimize hot pressing temperature applying 100 MPa pressure under argon atmosphere during the sintering procedure. The highest relative density of 98.44 % was obtained by hot pressing at 2250 deg. C. However, bending strengths of B 4 C/SiC composite samples were lower than monolithic B 4 C in all experimental conditions. (authors)
-
From press release to news: mapping the framing of the 2009 H1N1 A influenza pandemic.
Lee, Seow Ting; Basnyat, Iccha
2013-01-01
Pandemics challenge conventional assumptions about health promotion, message development, community engagement, and the role of news media. To understand the use of press releases in news coverage of pandemics, this study traces the development of framing devices from a government public health agency's press releases to news stories about the 2009 H1N1 A influenza pandemic. The communication management of the H1N1 pandemic, an international news event with local implications, by the Singapore government is a rich locus for understanding the dynamics of public relations, health communication, and journalism. A content analysis shows that the evolution of information from press release to news is marked by significant changes in media frames, including the expansion and diversification in dominant frames and emotion appeals, stronger thematic framing, more sources of information, conversion of loss frames into gain frames, and amplification of positive tone favoring the public health agency's position. Contrary to previous research that suggests that government information subsidies passed almost unchanged through media gatekeepers, the news coverage of the pandemic reflects journalists' selectivity in disseminating the government press releases and in mediating the information flow and frames from the press releases.
-
The small academic press in the land of giants
Directory of Open Access Journals (Sweden)
Frances Pinter
2015-11-01
Full Text Available Mergers and acquisitions, for example the merger of Macmillan Science and Education with Springer Science+Business Media, might suggest that large is the future for academic publishing. It might seem that giant players will dominate the future of scholarly publishing, but, at the same time, this year has seen the launch of UCL Press, the University’s in-house publishing arm. Goldsmiths, University of London, has also announced it is preparing to launch Goldsmiths Press, a new university press built on digital-first publishing, especially around unconventional projects traditionally excluded by publishers. Some of the more established university presses also seem to be increasing their scope. For example, Stanford University Press launched a new trade imprint and Manchester University Press has announced it has acquired forward titles from Bloomsbury Publishing. 'Insights 'asked two experts if there really is scope for the small academic press in the modern scholarly publishing environment. Frances Pinter has provided the perspective of the small university press. She is realistic about the challenges small academic publishers face, but concludes that there is space and opportunity for them to coexist with the giants. Michael Magoulias is equally realistic about the challenges of small, but sees the university press as a necessary, not to say, vital, alternative to commercial publishing.
-
Elbow joint fatigue and bench-press training.
Huang, Yen-Po; Chou, You-Li; Chen, Feng-Chun; Wang, Rong-Tyai; Huang, Ming-Jer; Chou, Paul Pei-Hsi
2014-01-01
Bench-press exercises are among the most common form of training exercise for the upper extremity because they yield a notable improvement in both muscle strength and muscle endurance. The literature contains various investigations into the effects of different bench-press positions on the degree of muscle activation. However, the effects of fatigue on the muscular performance and kinetics of the elbow joint are not understood fully. To investigate the effects of fatigue on the kinetics and myodynamic performance of the elbow joint in bench-press training. Controlled laboratory study. Motion research laboratory. A total of 18 physically healthy male students (age = 19.6 ± 0.8 years, height = 168.7 ± 5.5 cm, mass = 69.6 ± 8.6 kg) participated in the investigation. All participants were right-hand dominant, and none had a history of upper extremity injuries or disorders. Participants performed bench-press training until fatigued. Maximal possible number of repetitions, cycle time, myodynamic decline rate, elbow-joint force, and elbow-joint moment. We observed a difference in cycle time in the initial (2.1 ± 0.42 seconds) and fatigue (2.58 ± 0.46 seconds) stages of the bench-press exercise (P = .04). As the participants fatigued, we observed an increase in the medial-lateral force (P = .03) and internal-external moment (P ≤ .04) acting on the elbow joint. Moreover, a reduction in the elbow muscle strength was observed in the elbow extension-flexion (P ≤ .003) and forearm supination-pronation (P ≤ .001) conditions. The results suggest that performing bench-press exercises to the point of fatigue increases elbow-joint loading and may further increase the risk of injury. Therefore, when clinicians design bench-press exercise regimens for general athletic training, muscle strengthening, or physical rehabilitation, they should control carefully the maximal number of repetitions.
-
High density high-TC ceramic superconductors by hot pressing
International Nuclear Information System (INIS)
Mak, S.; Chaklader, A.C.D.
1989-01-01
High density and high T C superconductor specimens, YBa 2 Cu 3 O x , have been produced by hot-pressing. The factors studied are the effect of hot pressing on the density, the oxygen stoichiometry, the crystal structure, and the critical temperature. Hot pressing followed by heat treatment increased the density of the specimen to 93%. The hot pressing itself did not significantly affect the oxygen content in the specimen, and although the crystal structure appeared to be orthorhombic, the specimens were not superconducting above liquid nitrogen temperature. The superconductivity was restored after head treatment in oxygen. The highest critical temperature (T C ) of the hot pressed pellets was 82K, which was slightly lower than the T C that could be obtained with the cold pressed/sintered pellets. (6 refs., 5 figs., tab.)
-
CMS Security Handbook The Comprehensive Guide for WordPress, Joomla, Drupal, and Plone
Canavan, Tom
2011-01-01
Learn to secure Web sites built on open source CMSs Web sites built on Joomla!, WordPress, Drupal, or Plone face some unique security threats. If you're responsible for one of them, this comprehensive security guide, the first of its kind, offers detailed guidance to help you prevent attacks, develop secure CMS-site operations, and restore your site if an attack does occur. You'll learn a strong, foundational approach to CMS operations and security from an expert in the field.More and more Web sites are being built on open source CMSs, making them a popular target, thus making you vulnerable t
-
Internet Marketing with WordPress
Mercer, David
2011-01-01
The book's accompanying Interactive learning environment on siteprebuilder.com gives you an online place to enhance and extend your practical experience through exercises, consolidate your learning and theoretical knowledge with marked quizzes, interaction with your WordPress marketing community, and fun and exciting extras such as challenges and competitions. This book is for people already using WordPress, who want more visitors, better visitors, and to convert more of them into paying customers. No prior marketing experience is required, although a basic understanding of either hosted or se
-
Grange, Pascal
2015-09-01
The Allen Brain Atlas of the adult mouse (ABA) consists of digitized expression profiles of thousands of genes in the mouse brain, co-registered to a common three-dimensional template (the Allen Reference Atlas).This brain-wide, genome-wide data set has triggered a renaissance in neuroanatomy. Its voxelized version (with cubic voxels of side 200 microns) is available for desktop computation in MATLAB. On the other hand, brain cells exhibit a great phenotypic diversity (in terms of size, shape and electrophysiological activity), which has inspired the names of some well-studied cell types, such as granule cells and medium spiny neurons. However, no exhaustive taxonomy of brain cell is available. A genetic classification of brain cells is being undertaken, and some cell types have been chraracterized by their transcriptome profiles. However, given a cell type characterized by its transcriptome, it is not clear where else in the brain similar cells can be found. The ABA can been used to solve this region-specificity problem in a data-driven way: rewriting the brain-wide expression profiles of all genes in the atlas as a sum of cell-type-specific transcriptome profiles is equivalent to solving a quadratic optimization problem at each voxel in the brain. However, the estimated brain-wide densities of 64 cell types published recently were based on one series of co-registered coronal in situ hybridization (ISH) images per gene, whereas the online ABA contains several image series per gene, including sagittal ones. In the presented work, we simulate the variability of cell-type densities in a Monte Carlo way by repeatedly drawing a random image series for each gene and solving the optimization problem. This yields error bars on the region-specificity of cell types.
-
Dugdale, James H; Hunter, Angus; Di Virgilio, Thomas; Macgregor, Lewis J; Hamilton, D Lee
2017-02-13
This study examined the acute effects of the 'Slingshot' on bench-press performance, prime-mover surface electromyographic (sEMG) amplitude, and barbell velocity during maximal and submaximal bench-pressing in competitive male powerlifters. Fifteen male powerlifters (mean ± SD age: 27.05 ± 5.94 years; mass: 94.15kg; 1RM bench-press: 139.7 ± 16.79kg) participated in the study. Bench-press strength, average barbell velocity, and sEMG amplitude of the prime mover muscles (triceps brachii, pectoralis major and anterior deltoid) were measured during two conditions; 'Raw' (without use of any assistance) and 'Slingshot' [using the 'Slingshot' to perform both the weight achieved during 'Raw' 1RM testing (Raw max/SS), and absolute 1RM using the 'Slingshot' (SS)]. The results showed that the 'Slingshot' significantly increased bench press 1RM performance by a mean ± SD of 20.67kg ± 3.4kg. Barbell velocity and stick point analysis indicate that this improvement is likely driven by an increase in peak and pre-stick barbell velocity as triceps RMS was lower throughout all rep max phases with the 'Slingshot'. The 'Slingshot' also caused reductions in RMS, specifically of the triceps at all rep ranges but barbell velocity was better maintained in the last reps of all sets. These data indicate that the 'Slingshot' specifically de-loaded the triceps muscle throughout all rep ranges and provide assistance to maintaining barbell velocity under fatigue during later repetitions of multiple-repetition sets. The 'Slingshot' training aid could therefore be used in de-load phases of bench press training or as an over-reaching and velocity training aid.
-
Denmark, Democracy and the Free Press
DEFF Research Database (Denmark)
Breiting, Søren
2006-01-01
What's important to Danish people in Denmark and in the world - most will argue for the importance of a free critical press, solidarity with people who need help and a peaceful world.......What's important to Danish people in Denmark and in the world - most will argue for the importance of a free critical press, solidarity with people who need help and a peaceful world....
-
Czech Academy of Sciences Publication Activity Database
Hartley, D. P.; Kletzing, C. A.; Kurth, W. S.; Bounds, S. R.; Averkamp, T. F.; Hospodarsky, G. B.; Wygant, J. R.; Bonnell, J. W.; Santolík, Ondřej; Watt, C. E. J.
2016-01-01
Roč. 121, č. 5 (2016), s. 4590-4606 ISSN 2169-9380 R&D Projects: GA MŠk(CZ) LH15304 Institutional support: RVO:68378289 Keywords : EFW * EMFISIS * plasmaspheric hiss * sheath impedance * Van Allen Probes * whistler mode chorus Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 2.733, year: 2016 http://onlinelibrary.wiley.com/doi/10.1002/2016JA022501/abstract
-
The Vortex and the Line: Performative Gestures in Allen Ginsberg's ‘Wichita Vortex Sutra’
DEFF Research Database (Denmark)
Sørensen, Bent
and their identity politics… Queering the straight lines of Modernism, Allen Ginsberg suggests in his long poem about America and the Vietnam War, ‘Wichita Vortex Sutra’, that lying media discourses and corrupt political and military statements about the necessity of participation in the war may be cancelled out...... by a poet performing the simple, yet impossible speech act of declaring the end of the war, and in doing so queering the original declaratory speech act of the executive power. The poet must enter intrepidly the vortex of lies told by the voices disseminated by the media on behalf of politicians, authority...... to provide the reader of the Sutra with the possibility of Enlightenment. While the poet may be forced to travel along straight lines to penetrate the vortex, he should at any given opportunity queer these lines as much as possible....
-
Sengupta, A.; Kletzing, C.; Howk, R.; Kurth, W. S.
2017-12-01
An important goal of the Van Allen Probes mission is to understand wave particle interactions that can energize relativistic electron in the Earth's Van Allen radiation belts. The EMFISIS instrumentation suite provides measurements of wave electric and magnetic fields of wave features such as chorus that participate in these interactions. Geometric signal processing discovers structural relationships, e.g. connectivity across ridge-like features in chorus elements to reveal properties such as dominant angles of the element (frequency sweep rate) and integrated power along the a given chorus element. These techniques disambiguate these wave features against background hiss-like chorus. This enables autonomous discovery of chorus elements across the large volumes of EMFISIS data. At the scale of individual or overlapping chorus elements, topological pattern recognition techniques enable interpretation of chorus microstructure by discovering connectivity and other geometric features within the wave signature of a single chorus element or between overlapping chorus elements. Thus chorus wave features can be quantified and studied at multiple scales of spectral geometry using geometric signal processing techniques. We present recently developed computational techniques that exploit spectral geometry of chorus elements and whistlers to enable large-scale automated discovery, detection and statistical analysis of these events over EMFISIS data. Specifically, we present different case studies across a diverse portfolio of chorus elements and discuss the performance of our algorithms regarding precision of detection as well as interpretation of chorus microstructure. We also provide large-scale statistical analysis on the distribution of dominant sweep rates and other properties of the detected chorus elements.
-
First stage of bio-jet fuel production: non-food sunflower oil extraction using cold press method
Directory of Open Access Journals (Sweden)
Xianhui Zhao
2014-06-01
Full Text Available As a result of concerning petroleum price increasing and environmental impact, more attention is attracted to renewable resources for transportation fuels. Because not conflict with human and animal food resources, non-food vegetable oils are promising sources for developing bio-jet fuels. Extracting vegetable oil from oilseeds is the first critical step in the pathway of bio-jet fuel production. When sunflower seeds are de-hulled, there are always about 5%–15% broken seed kernels (fine meat particles left over as residual wastes with oil content up to 48%. However, the oil extracted from these sunflower seed residues is non-edible due to its quality not meeting food standards. Genetically modified sunflower grown on margin lands has been identified one of sustainable biofuel sources since it doesn't compete to arable land uses. Sunflower oils extraction from non-food sunflower seeds, sunflower meats, and fine sunflower meats (seed de-hulling residue was carried out using a cold press method in this study. Characterization of the sunflower oils produced was performed. The effect of cold press rotary frequency on oil recovery and quality was discussed. The results show that higher oil recovery was obtained at lower rotary frequencies. The highest oil recovery for sunflower seeds, sunflower meats, and fine sunflower meats in the tests were 75.67%, 89.74% and 83.19% respectively. The cold press operating conditions had minor influence on the sunflower oil quality. Sunflower meat oils produced at 15 Hz were preliminarily upgraded and distilled. The properties of the upgraded sunflower oils were improved. Though further study is needed for the improvement of processing cost and oil recovery, cold press has shown promising to extract oil from non-food sunflower seeds for future bio-jet fuel production.
-
Directory of Open Access Journals (Sweden)
Emilia Wilmowicz
2016-03-01
Full Text Available Allene oxide synthase (AOS encodes the first enzyme in the lipoxygenase pathway, which is responsible for jasmonic acid (JA formation. In this study we report the molecular cloning and characterization of InAOS from Ipomoea nil. The full-length gene is composed of 1662 bp and encodes for 519 amino acids. The predicted InAOS contains PLN02648 motif, which is evolutionarily conserved and characteristic for functional enzymatic proteins. We have shown that wounding led to a strong stimulation of the examined gene activity in cotyledons and an increase in JA level, which suggest that this compound may be a modulator of stress responses in I. nil.
-
The Liberal Struggle for Press Freedom
DEFF Research Database (Denmark)
Mogensen, Kirsten
In this paper, the public debate following the re-ligion-motivated assassination of Dutch filmmaker Theo van Gogh in November 2004 is examined. The paper aims at describ-ing religious as well as secular positions in the Danish debate about freedom of speech and press in relation to religious issues....... Historically, the concept of press freedom was linked to a fight for religious freedom in London, as described by Siebert....
-
1979: The Campus Student Press in America.
Ingelhart, Louis E.
1979-01-01
Discusses a number of topics involving the campus press, including the independence of campus publications, censorship issues, the relationship between the student press and the college administrator, the financing of student newspapers, yearbook production and financing, probable future student publications trends, and the need for appropriate…
-
Integrating the Allen Brain Institute Cell Types Database into Automated Neuroscience Workflow.
Stockton, David B; Santamaria, Fidel
2017-10-01
We developed software tools to download, extract features, and organize the Cell Types Database from the Allen Brain Institute (ABI) in order to integrate its whole cell patch clamp characterization data into the automated modeling/data analysis cycle. To expand the potential user base we employed both Python and MATLAB. The basic set of tools downloads selected raw data and extracts cell, sweep, and spike features, using ABI's feature extraction code. To facilitate data manipulation we added a tool to build a local specialized database of raw data plus extracted features. Finally, to maximize automation, we extended our NeuroManager workflow automation suite to include these tools plus a separate investigation database. The extended suite allows the user to integrate ABI experimental and modeling data into an automated workflow deployed on heterogeneous computer infrastructures, from local servers, to high performance computing environments, to the cloud. Since our approach is focused on workflow procedures our tools can be modified to interact with the increasing number of neuroscience databases being developed to cover all scales and properties of the nervous system.
-
Jatropha press cake as organic fertilizer in lettuce cultivation
Directory of Open Access Journals (Sweden)
José R. Mantovani
Full Text Available ABSTRACT In biodiesel production, vegetable press cake is obtained as waste, and a suitable destination for jatropha press cake would be the use in agriculture as organic fertilizer. This study aimed to evaluate the effect of jatropha press cake on soil fertility attributes and on lettuce production and accumulation of nutrients in the shoots. The experiment was conducted in pots in a greenhouse, in a randomized block design with eight treatments and five replicates. The treatments consisted of doses of jatropha press cake equivalent to 0, 0.5, 1.0, 2.0, 4.0, 8.0, 16.0 and 32.0 t ha-1. Portions of 5.5 dm3 of soil received limestone, phosphate fertilizer and the doses of jatropha press cake, and remained incubated for 30 days. After incubation, soil samples were collected, each pot received one lettuce seedling and the experiment was carried out for 45 days. The organic fertilization with jatropha press cake increased the contents of nutrients in the soil, especially K+, but caused increment in soil acidity and electrical conductivity. The use of jatropha press cake as organic fertilizer decreased lettuce production and accumulation of nutrients in the shoots.
-
Siger, Aleksander; Józefiak, Marta; Górnaś, Paweł
2017-01-01
The paper looks at the levels of canolol, tocopherols and antioxidant activity in cold-pressed and hot-pressed rapeseed oils produced from seeds of various moisture levels (5%, 7.5%, and 10%). The paper also considers the effects of seed roasting on the levels of these compounds. The material used for the tests was rapeseed cv. Adrianna. The quality of the oils obtained is determined using peroxide and acid values. The levels of canolol and tocopherols are analyzed using HPLC. The DPPH radical-scavenging activity method for oil samples and phenolic extract from oils was used. It has been demonstrated that the oils produced from rapeseeds with a 5% moisture content, and in particular from cold-pressed oils, were characterized by the lowest peroxide values. Cold-pressed oils produced from rapeseeds with a 5% moisture content were characterized by higher levels of tocopherols and plastochromanol-8. In the case of hot-pressed oils, the highest levels of tocopherols were found in oils pro- duced from seeds with a 7.5% moisture content, and the greatest amount of PC-8 (more than 4 mg/100 g) was found in oils produced from seeds with a 10% moisture content. Hot-pressed oils have been shown to have higher levels of these compounds than cold-pressed oils. Both roasting and hot pressing led to an increase in the amount of canolol in the oils investigated. When analysing the antioxidant activity of the oils and phenolic extracts it was shown that phenolic compounds are responsible for approx. 10% of total antioxidant activity. Various levels of biologically active compounds were shown to be present in the rapeseed oil obtained from raw materials of a varying moisture content. The type of pressing process (cold-pressing or hot-pressing) and whether the seeds have undergone roasting has also been shown to affect the resulting oil and the level of native antioxidants it contains.
-
Study of Servo Press with a Flywheel
Tso, Pei-Lum; Li, Cheng-Ho
The servo press with a flywheel is able to provide flexible motions with energy-saving merit, but its true potential has not been thoroughly studied and verified. In this paper, such the “hybrid-driven” servo press is focused on, and the stamping capacity and the energy distribution between the flywheel and the servomotor are investigated. The capacity is derived based on the principle of energy conservation, and a method of using a capacity percentage plane for evaluation is proposed. A case study is included to illustrate and interpret that the stamping capacity is highly dependent on the programmed punch motions, thus the capacity prediction is always necessary while applying this kind of servo press. The energy distribution is validated by blanking experiments, and the results indicate that the servomotor needs only to provide 15% to the flywheel torque, 12% of the total stamping energy. This validates that the servomotor power is significantly saved in comparison with conventional servo presses.
-
Distal clavicular osteolysis in adults: association with bench pressing intensity
International Nuclear Information System (INIS)
Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B.; Ciccotti, Michael G.
2016-01-01
To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p 1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)
-
Resident-performed Ex-PRESS shunt implantation versus trabeculectomy.
Seider, Michael I; Rofagha, Soraya; Lin, Shan C; Stamper, Robert L
2012-09-01
To compare outcomes between resident-performed trabeculectomy and Ex-PRESS shunt implantation. A consecutive cohort of 36 Ex-PRESS shunt implantations and 57 trabeculectomies (1 eye/patient) performed by resident surgeons in their third year of ophthalmic training at the University of California, San Francisco and at the San Francisco Veterans Administration Hospital, under the supervision of a single glaucoma fellowship-trained surgeon were included in this study. Eyes with PRESS shunt groups at all follow-up points. On average, the Ex-PRESS shunt group required significantly less ocular antihypertensive medication to control IOP at 3 months postoperative (P=0.01), but no difference was found at 6 months or 1 year (all, P≥0.28). A larger proportion of Ex-PRESS shunt patients had good IOP control without medication at 3 (P=0.057) and 6 months (P=0.076) postoperatively. No difference was found in the rates of sight-threatening complications between groups (all, P≥0.22). In the hands of ophthalmology residents in their third year of training, the trabeculectomy and Ex-PRESS shunt implantation procedures perform comparably in terms of postoperative IOP control, reduction in patient dependence on ocular antihypertensive medications, and risk of complication in our population.
-
Plumley, George
2015-01-01
Create and expand feature-rich sites with no programming experience Ready to build, maintain, and expand your web site with WordPress but have no prior programming experience? WordPress 24-Hour Trainer, 3rd Edition is your book-and-video learning solution that walks you step-by-step through all the important features you will need to know. Lessons range from focused, practical everyday tasks to more advanced, creative features. Learn from an industry professional how to enter content, create pages, manage menus, utilize plug-ins, connect to social media, create membership and e-commerce site
-
Maximilien Brice
2008-01-01
9 July 2008 - Microsoft Co-Founder P. Allen visiting ATLAS control room and underground experimental area with Adviser J. Ellis and IT Department Head W. von Rüden and guided by ATLAS Collaboration Users S. Goldfarb, P. Nevski and L. Price.
-
Direct drive digital servo press with high parallel control
Murata, Chikara; Yabe, Jun; Endou, Junichi; Hasegawa, Kiyoshi
2013-12-01
Direct drive digital servo press has been developed as the university-industry joint research and development since 1998. On the basis of this result, 4-axes direct drive digital servo press has been developed and in the market on April of 2002. This servo press is composed of 1 slide supported by 4 ball screws and each axis has linearscale measuring the position of each axis with high accuracy less than μm order level. Each axis is controlled independently by servo motor and feedback system. This system can keep high level parallelism and high accuracy even with high eccentric load. Furthermore the 'full stroke full power' is obtained by using ball screws. Using these features, new various types of press forming and stamping have been obtained by development and production. The new stamping and forming methods are introduced and 'manufacturing' need strategy of press forming with high added value and also the future direction of press forming are also introduced.
-
Distal clavicular osteolysis in adults: association with bench pressing intensity
Energy Technology Data Exchange (ETDEWEB)
Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Musculoskeletal Imaging and Interventions, Department of Radiology, Thomas Jefferson University Hospital, Philadelphia, PA (United States); Ciccotti, Michael G. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Sports Medicine, Department of Orthopedic Surgery, Thomas Jefferson University Hospital, Rothman Institute, Philadelphia, PA (United States)
2016-11-15
To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p < 0.001). Low-intensity bench pressing (1RM less than 1.5 times the body weight) was not a risk factor for DCO (OR = 0.6; 95 % CI = 0.4-0.8). High frequency (>1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)
-
Communicators take nine Virginia Press Women awards
Owczarski, Mark
2008-01-01
Three Virginia Tech communicators have won Virginia Press Women awards. The winners - Susan Trulove, research division communications manager; Clara Cox, university publications director; and Heather Riley Chadwick, College of Architecture and Urban Studies communication manager - were announced at the Virginia Press Women Annual Spring Conference in Staunton, Va.
-
Mouikis, C.; Bingham, S.; Kistler, L. M.; Farrugia, C. J.; Spence, H. E.; Gkioulidou, M.
2016-12-01
The ring current responds differently to the different solar and interplanetary storm drivers such as coronal mass injections, (CME's), co-rotating interaction regions (CIR's), high-speed streamers and other structures. The resulting changes in the ring current particle pressure change the global magnetic field, which affects the transport of the radiation belts. In order to determine the field changes during a storm, it is necessary to understand the transport, sources and losses of the particles that contribute to the ring current. The source population of the storm time ring current is the night side plasma sheet. We use Van Allen Probes observations to determine the ring current pressure contribution of the convecting plasma sheet H+ and O+ particles in the storm time development of the ring current. We compare storms that are related to different interplanetary drivers, CMEs and CIRs, as observed at different local times. We find that during the storm main phase most of the ring current pressure in the pre-midnight inner magnetosphere is contributed by particles on open drift paths that cause the development of a strong partial ring current that causes most of the main phase Dst drop. These particles can reach as deep as L 2 and their pressure compares to the local magnetic field pressure as deep as L 3. During the recovery phase, if these particles are not lost at the magnetopause, will become trapped and will contribute to the symmetric ring current. However, the largest difference between the CME and CIR ring current responses during the storm main and early recovery phases is caused by how the 15 - 60 keV O+ responds to these drivers.
-
CSR-communication in the Business Press
DEFF Research Database (Denmark)
Morsing, Mette; Langer, Roy
on a broadly encompassing and ambiguous definition of CSR. Our empirical data shows how the business press in its discourse on CSR provides no clarity on the definition of CSR in terms of a coherent motive, a dominant stakeholder or a consistent issue, but rather maintains ambiguity and imprecision about......In this paper we analyze the construction of corporate social responsibility in the business press as an act of strategic ambiguity. While corporate social responsibility (CSR) generally evokes positive associations in public opinion, this paper demonstrates that these associations are based...... is systematically maintained in the business press. We refer to this process as strategic ambiguity. The paper discusses the potential value and limitations of framing CSR in a state of strategic ambiguity in the context of the concurrent rethinking of the role of business in modern welfare societies....
-
PROPAGANDA IN PERIODICAL PRESS DURING THE GREAT PATRIOTIC WAR (CASE STUDY OF VLADIMIR REGION
Directory of Open Access Journals (Sweden)
Илья Сергеевич Тряхов
2016-11-01
Full Text Available The article considers the characteristic of propaganda in the periodical press during World War II. The author pays attention to the disadvantages of propaganda and flexibility of the Soviet press influence during the hard war years. The author uses the examples of central and local newspapers to considerthe drawbacks of propaganda. Besides, the sources of the research were the speech of L.Z. Mekhlis,the Chief of the Red Army propaganda (in Russian - “Glavpur”, the official letters of G.F. Aleksandrov,the chief of propaganda and agitation control to A.S. Shcherbakov, the reports of the Information Bureau, the letters addressed to Stalin to the editorial board of the central newspapers. In the article there are used both general scientific and specific historical methods of the historical research. The latter include the historical-genetic method, implemented through identifying the sources and reasons for changes in the agitation and propaganda activities. This method enables us to compile facts and historical data and recreate the overall picture of the propaganda efforts. Besides, there was used the historical-comparative method, aimed atidentifying various features and their comparison and contrasting. The author has come to the conclusion that in 1941-1943 the periodical press made a lot of propaganda mistakes, however by the end of the war these mistakes were less evident. The attention is paid to the brightest examples of the political and military propaganda. In remote regions there was no need of counter-propaganda since the opponent had no opportunity to carry out propaganda activities among the population. In general, the efficiently organized work of periodicals made the consolidating impact on the mass consciousness.
-
Wynne, Rhys
2013-01-01
A concise guide, written in an easy-to-follow format.This book is aimed at ambitious website or blog owners looking to add a forum to their site quickly and easily. Basic experience in WordPress and with managing a website is expected. Knowledge of HTML and PHP will be a bonus, though it isn't necessary.
-
Legal Protection To The Infotainment Of Press Development In Indonesia
Directory of Open Access Journals (Sweden)
Anwar Fuadi
2015-08-01
Full Text Available Abstract In the socio-political life the press has become an integral part in democratic life. The press has become one of the means for citizens to bring their thoughts and opinions. Nowadays there is a tendency to increase the quantity of press publications sharp but not accompanied by a statement of the quality of journalism. The objective of this research is to understand the essence of the infotainment liability as a mass media in order to construct a freedom of the press principle which has legitimacy within the legal system of the press in Indonesia. The type of research used in this paper is normative research or also known as doctrinal research by reviewing the legal protection to the infotainment as a mass media in Indonesia. The outcomes of the research indicate that the role of infotainment in the legal system of the press in Indonesia refers to the legal construction of institutional and infotainment organizers itself. Legal liability of Infotainment essentially can be seen from the press obligations stipulated in the Law No. 40 of 1999 regarding the Press Law No. 32 of 2002 regarding Broadcasting as well as the Journalists Code of Ethics which support freedom of the press and expression.
-
Concept Design of Movable Beam of Hydraulic Press
Directory of Open Access Journals (Sweden)
Li Yancong
2017-01-01
Full Text Available The hydraulic press movable beam is one of the key components of the hydraulic press; its design quality impacts the accuracy of the workpiece that the press suppressed. In this paper, first, with maximum deflection and material strength as constraints, mechanical model of the movable beam is established; next, the concept design model of the moveable beam structure is established; the relationship among the force of the side cylinder, the thickness of the inclined plate, outer plate is established also. Taking movable beam of the 100MN type THP10-10000 isothermal forging hydraulic press as an example, the conceptual design result is given. This concept design method mentoned in the paper has general meaning and can apply to other similar product design.
-
Fabrication and properties of hot pressed bismuth tungstate
International Nuclear Information System (INIS)
Streicher, W.L.
1978-01-01
Bi 2 WO 6 is a synthetic polar material that is a possible candidate for energy conversion and detection systems. Previous research on this material has been concerned with crystal growth and sintering characteristics of polycrystalline compacts. This study involves itself with the fabrication of polycrystalline compacts by hot pressing techniques. Densities approaching theoretical crystal density were achieved by hot pressing at 850 0 C for one hour with pressures exceeding 35 MPa. Before hot pressing, the sintering range was determined by high temperature dilatometry of unfired Bi 2 WO 6 ceramics. Hot pressed discs were characterized by scanning electron microscopy, differential scanning calorimetry, and x-ray diffraction. Electrical properties were determined by dc resistivity, capacitance, and conductance measurements, ac poling, dc poling, and current-voltage measurements
-
Student Press in American Archives, Fall/Winter 1973-74.
National Council of Coll. Publications Advisers.
This issue of the "Student Press in America Archives List" contains 100 entries on current issues and information, as well as cases involving student press editors, advisers, student media, and the generic subject of the campus press, emphasizing censorship practices and principles. Information concerning how and where to obtain documents of…
-
Engaging and Supporting a University Press Scholarly Community
Directory of Open Access Journals (Sweden)
Megan Taylor
2018-03-01
Full Text Available In this paper we explore how the development of The University of Huddersfield Press, a publisher of open access scholarly journals and monographs, has enabled the sharing of research with a wider online audience. We situate the development of the Press within a wider research environment and growing community of New University Presses (NUPs where there is an increasing demand for demonstrating research impact, which drives the need for improved analysis and reporting of impact data, a task that often falls within the remit of library and academic support services. We detail the benefits of the University Press Manager role in terms of ensuring professional service that delivers consistency and sustainability. We go on to outline the experiences of engaging with different online spaces and detail the extensive support for student authors. We argue that in order for the Press to support building a strong and engaged scholarly community and provide new spaces for emerging research, continued investment in both platform development and infrastructure is required.
-
Zhao, H.; Baker, D. N.; Califf, S.; Li, X.; Jaynes, A. N.; Leonard, T.; Kanekal, S. G.; Blake, J. B.; Fennell, J. F.; Claudepierre, S. G.; Turner, D. L.; Reeves, G. D.; Spence, H. E.
2017-12-01
Using measurements from the Van Allen Probes, a penetration event of tens to hundreds of keV electrons and tens of keV protons into the low L shells (L electric field represented by the Volland-Stern model or a uniform dawn-dusk electric field model based on the electric field measurements. It suggests that the underlying physical mechanism responsible for energetic electron deep penetration, which is very important for fully understanding energetic electron dynamics in the low L shells, should be MLT localized.
-
Couturier, Guy; Clement, C.R.; Viana Filho, P.
1991-01-01
#Leptoglossus lonchoïdes$ Allen (Heteroptera Coreidae) provoque la chute des fruits de #Bactris gasipaes$ HBK (Palmae) en Amazonie centrale. Les plantations de "pejibaye", #B.gasipaes$, un palmier neotropical domestiqué, souffrent d'importantes chutes de jeunes fruits en Amazonie centrale (Manaus, Amazonas, Brésil), dues en partie, peut-être principalement, à la punaise #L. lonchoïdes$. Dans cet article, on évalue l'importance économique des dégâts et on décrit l'insecte. (Résumé d'auteur)...
-
Hot pressing of B{sub 4}C/SiC composites
Energy Technology Data Exchange (ETDEWEB)
Sahin, F.C.; Turhan, E.; Yesilcubuk, S.A.; Addemir, O. [Ystanbul Technical University, Faculty of Chemistry and Metallurgy, Materials and Metallurgical Engineering Dept., Maslak-Ystanbul (Turkey)
2005-07-01
B{sub 4}C/SiC ceramic composites containing 10-20-30 vol % SiC were prepared by hot pressing method. The effect of SiC addition and hot pressing temperature on sintering behaviour and mechanical properties of hot pressed composites were investigated. Microstructures of hot pressed samples were examined by SEM technique. Three different temperatures (2100 deg. C, 2200 deg. C and 2250 deg. C) were used to optimize hot pressing temperature applying 100 MPa pressure under argon atmosphere during the sintering procedure. The highest relative density of 98.44 % was obtained by hot pressing at 2250 deg. C. However, bending strengths of B{sub 4}C/SiC composite samples were lower than monolithic B{sub 4}C in all experimental conditions. (authors)
-
WordPress 3 For Business Bloggers
Thewlis, Paul
2011-01-01
This is a practical, hands-on book based around a fictitious case study blog, which you will build on a development server using WordPress. The case study grows chapter by chapter, from installing your local development server, right up to the finished blog. This book is for anybody running or starting a business blog using WordPress, whether you plan to use your blog for PR and marketing, or want to profit directly from blogging.
-
FREEDOM OF PRESS AND JURY TRIAL IN ISTRIA 1848/1849
Directory of Open Access Journals (Sweden)
Dunja Pastović
2015-01-01
Full Text Available In Istria, as a part of the Austrian legal system, jury trial was initially introduced in the revolutionary year of 1848 only for press offenses, in the framework of aspirations for freedom of thought and expression through the press, which represented the most appropriate medium for the dissemination of new ideas and mobilization of the political masses. Trial by jury was supposed to secure impartial and objective trials, which could not be expected of professional judges due to insufficient guarantees of their impartiality. This paper examines the press-related orders and laws passed during 1848 and 1849 which regulated the freedom of press and jury jurisdiction. On the basis of an analysis of the legislative framework, jurisprudence, and the Istrian press during the examined time period, the author has decided that the introduction of the freedom of the press and jury trials for press offenses in 1848/1849 on the territory of Istria didn’t have a large practical significance.
-
Directory of Open Access Journals (Sweden)
Ahmad Reza Zibaei
2016-12-01
Conclusion: Considering these results it can be maintained that TRX bench press resistance training can be an alternative and effective practice for barbell bench press because, given the results, it can be appreciated that TRX bench press, dips low in the trunk, can lead to muscle activity close to the level of muscle activity during the barbell bench press drill.
-
Modelling of powder die compaction for press cycle optimization
Directory of Open Access Journals (Sweden)
Bayle Jean-Philippe
2016-01-01
Full Text Available A new electromechanical press for fuel pellet manufacturing was built last year in partnership between CEA-Marcoule and ChampalleAlcen. This press was developed to shape pellets in a hot cell via remote handling. It has been qualified to show its robustness and to optimize the compaction cycle, thus obtaining a better sintered pellet profile and limiting damage. We will show you how 400 annular pellets have been produced with good geometry's parameters, based on press settings management. These results are according to a good phenomenological pressing knowledge with Finite Element Modeling calculation. Therefore, during die pressing, a modification in the punch displacement sequence induces fluctuation in the axial distribution of frictional forces. The green pellet stress and density gradients are based on these frictional forces between powder and tool, and between grains in the powder, influencing the shape of the pellet after sintering. The pellet shape and diameter tolerances must be minimized to avoid the need for grinding operations. To find the best parameters for the press settings, which enable optimization, FEM calculations were used and different compaction models compared to give the best calculation/physical trial comparisons. These simulations were then used to predict the impact of different parameters when there is a change in the type of powder and the pellet size, or when the behavior of the press changes during the compaction time. In 2016, it is planned to set up the press in a glove box for UO2 manufacturing qualification based on our simulation methodology, before actual hot cell trials in the future.
-
Mannes of Forging and Perspectives of Knuckle Joint Presses Modernization
Directory of Open Access Journals (Sweden)
A. A. Antsifirov
2014-01-01
Full Text Available The article raises an issue to enhance technological forging capabilities on the known knuckle joint presses. It provides an illustrated overview of main design types of presses with crank-knuckle, toggle-knuckle, and knuckle joint mechanisms. The article also shows the advantages of the modernization way and improvement just of the active press equipment in terms of quality-to-price ratio, for example, as compared to the similar new foreign press equipment.It gives an overview of features, which provide forging processes owing to kinetic energy accumulated with the moving parts of the known designs of the knuckle joint presses depending on the drive actuating mechanism. Focused attention is drawn to forging on the knuckle joint presses for a time of contact with a work piece to be comparable with the duration of the work piece deformation process on hydraulic forging hammers. This allows us to forge thin-wall products with process automation compared to the forging hammers.Analysis of accumulating processes of kinetic energy by the moving parts of the knuckle joint presses has shown that presses driven by hydraulic cylinders or two screw hydraulic cylinder are the most optimal for technological operations as evidenced by references to domestic and foreign invention certificates and patents. The article presents disadvantages of forging on presses with hydraulic or pneumatic drive. It is a dependence of the deformation force, caused, mainly, by a force of the drive cylinder. The article gives linear movement rate quantities of press moving members depending on the drives of the actuating mechanism. Based on the above analysis of the features to manufacture work pieces on the knuckle joint presses, the article gives the rationale for the relevance of forging in a short period of time, provided that the moving parts of the press accumulate the required kinetic energy. This can be achieved only through modernization and improvement of forging
-
Bergmans, Wim
1989-01-01
The genera Micropteropus Matschie, 1899, Epomops Gray, 1870, Hypsignathus H. Allen, 1861, Nanonycteris Matschie, 1899 and Plerotes Andersen, 1910 and the species assigned to them are reviewed. All the currently recognized taxa are maintained except subspecific partitions in Epomops franqueti (Tomes,
-
Book reviews | Malan | African Journal on Conflict Resolution
African Journals Online (AJOL)
CONFLICT AND RESOLUTION: PEACE-BUILDING THROUGH THE BALLOT BOX IN ZIMBABWE, NAMIBIAAND CAMBODIA GRIFFITH, Allen 1998. New Cherwell Press, Oxford. 337pp (Allan Griffith, who had been foreign policy adviser to Australian prime ministers or over 30 years, completed this book as Visiting Fellow of ...
-
Armstrong, T. P.; Manweiler, J. W.; Gerrard, A. J.; Gkioulidou, M.; Lanzerotti, L. J.; Patterson, J. D.
2013-12-01
Observations from ACE EPAM including energy spectra of protons, helium, and oxygen will be prepared for coordinated use in estimating the direct and indirect access of energetic particles to inner and outer geomagnetic trapping zones. Complete temporal coverage from ACE at 12 seconds, 5 minutes, 17 minutes, hourly and daily cadences will be used to catalog interplanetary events arriving at Earth including interplanetary magnetic field sector boundaries, interplanetary shocks, and interplanetary coronal mass ejections, ICMEs. The first 6 months of 2013 have included both highly disturbed times, March 17 and May 22, and extended quiet periods of little or no variations. Among the specific questions that ACE and Van Allen Probes coordinated observations may aid in resolving are: 1. How much, if any, direct capture of interplanetary energetic particles occurs and what conditions account for it? 2. How much influence do interplanetary field and particle variations have on energization and/or loss of geomagnetically trapped populations? The poster will also present important links and describe methods and important details of access to numerically expressed ACE EPAM and Van Allen Probes RBSPICE observations that can be flexibly and easily accessed via the internet for student and senior researcher use.
-
Agapitov, O. V.; Mozer, F.; Artemyev, A.; Krasnoselskikh, V.; Lejosne, S.
2014-12-01
A huge number of different non-linear structures (double layers, electron holes, non-linear whistlers, etc) have been observed by the electric field experiment on the Van Allen Probes in conjunction with relativistic electron acceleration in the Earth's outer radiation belt. These structures, found as short duration (~0.1 msec) quasi-periodic bursts of electric field in the high time resolution electric field waveform, have been called Time Domain Structures (TDS). They can quite effectively interact with radiation belt electrons. Due to the trapping of electrons into these non-linear structures, they are accelerated up to ~10 keV and their pitch angles are changed, especially for low energies (˜1 keV). Large amplitude electric field perturbations cause non-linear resonant trapping of electrons into the effective potential of the TDS and these electrons are then accelerated in the non-homogeneous magnetic field. These locally accelerated electrons create the "seed population" of several keV electrons that can be accelerated by coherent, large amplitude, upper band whistler waves to MeV energies in this two step acceleration process. All the elements of this chain acceleration mechanism have been observed by the Van Allen Probes.
-
Movement Features Which Describe the Flat Bench Press
Directory of Open Access Journals (Sweden)
Król Henryk
2017-06-01
Full Text Available Introduction. In sport technique studies, motion features can be useful as they have a certain defined measure [1]. In this work, we examined the following three features: the structure of the movement (all the characteristics of the movement, the fluency of the movement, and the rhythm of the movement. The aim of the study was to determine the usefulness of the selected movement features in the evaluation of the flat bench press. The protocol of the study included a flat bench press with free weights and a “touch-and-go” technique. Material and methods. The study involved twenty healthy men; however, only two were selected for analysis. The first subject was a 25-year-old powerlifter (body mass = 95 kg; body height = 182 cm; 1-RM in flat bench press = 145 kg. The second one was a 25-year-old bodybuilder (body mass = 77 kg; body height = 175 cm; 1-RM in flat bench press = 100 kg. The subjects performed consecutive sets of a single repetition of flat bench pressing with an increasing load (70, 80, 90, and 100% 1-RM, with the anticipated maximum weight, until the completion of one repetition maximum. Multidimensional movement analysis was made with the measuring system Smart-E (BTS, Italy, which consisted of six infrared cameras (120 Hz and a wireless module to measure muscle bioelectric activity (Pocket EMG. Results. It was demonstrated that the internal structure of the bench press performed by the bodybuilder and the powerlifter was different. As the time-history of barbell kinematics (the acceleration-time curve showed, with increased loading of the barbell, the rhythm of the flat bench press changed, and the fluidity of the movement worsened.
-
Directory of Open Access Journals (Sweden)
Kaarle Nordenstreng
2007-06-01
Full Text Available This article intends to rectify three popular beliefs related to press freedom: (1 that the idea of a free marketplace of ideas with a self-righting truth belongs to original liberalism, (2 that UNESCO’s primary mission is to promote freedom of information, and (3 that the Universal Declaration of Human Rights provides legal safeguards for the media. These beliefs are shown, on the basis of the legacy of liberalism and documents of the international community, to be misleading myths. Instead of accurate readings of the idea of freedom, they serve as ideological positions which are harmful to democracy. The Millennium Declaration provides further proof that the international community has a much more balanced view of freedom of information than that typically held by media professionals. Therefore it is important to liberate the concept of press freedom from its ideological baggage.
-
Editorial: Open Source in Government
Directory of Open Access Journals (Sweden)
Dru Lavigne
2009-04-01
Full Text Available Last summer, the Center for Strategic and International Studies published the sixth update to their Open Source Policy survey. The survey "tracks governmental policies on the use of open source software as reported in the press or other media." The report lists 275 open source policy initiatives. It also breaks down by country and by government level whether the policy on the use of open source is considered to be advisory, preferential, or mandatory. The editorial theme for the May issue of the OSBR is "open source in government" and we are pleased that the authors have drawn upon their experiences to provide insight into public policy regarding open source for many parts of the world.
-
Microplasticity in hot-pressed beryllium
International Nuclear Information System (INIS)
Plane, D.C.; Bonfield, W.
1977-01-01
Closed hysteresis loops measured in the microstrain region of hot pressed, commercially pure, polycrystalline beryllium are correlated with a dislocation - impurity atom, energy dissipating mechanism. (author)
-
Space Weather Operation at KASI With Van Allen Probes Beacon Signals
Lee, Jongkil; Kim, Kyung-Chan; Giuseppe, Romeo; Ukhorskiy, Sasha; Sibeck, David; Kessel, Ramona; Mauk, Barry; Giles, Barbara; Gu, Bon-Jun; Lee, Hyesook; Park, Young-Deuk; Lee, Jaejin
2018-02-01
The Van Allen Probes (VAPs) are the only modern National Aeronautics and Space Administration (NASA) spacecraft broadcasting real-time data on the Earth's radiation belts for space weather operations. Since 2012, the Korea Astronomy and Space Science Institute (KASI) has contributed to the receipt of these data via a 7 m satellite-tracking antenna and used these beacon data for space weather operations. An approximately 15 min period is required from measurement to acquisition of Level-1 data. In this paper, we demonstrate the use of VAP data for monitoring space weather conditions at geostationary orbit (GEO) by highlighting the Saint Patrick's Day storm of 2015. During that storm, Probe-A observed a significant increase in the relativistic electron flux at 3 RE. Those electrons diffused outward resulting in a large increase of the electron flux >2 MeV at GEO, which potentially threatened satellite operations. Based on this study, we conclude that the combination of VAP data and National Oceanic and Atmospheric Administration-Geostationary Operational Environmental Satellite (NOAA-GOES) data can provide improved space environment information to geostationary satellite operators. In addition, the findings obtained indicate that more data-receiving sites would be necessary and data connections improved if this or a similar system were to be used as an operational data service.
-
News from the Library: PressDisplay on mobile devices!
CERN Library
2013-01-01
You are probably already using PressDisplay to read newspapers online, but for those of you who are not yet aware of this service, PressDisplay is an online portal where you can browse and read online articles from more than 1,900 newspapers from 95 countries, as soon as they are published. Whether you are an experienced user or a beginner, we have good news concerning PressDisplay: our license now permits you to download complete newspaper issues to your mobile devices and read them offline wherever you like. To do that, you have to use the mobile app PressReader. Instructions on how to install the PressReader app are available here: For Ipad For Android smartphone For Android tablet For Windows 8 devices For BlackBerry Playbook For Android eReader Your feedback is welcome! Please contact us by e-mail.
-
Pressing technology for large bottoms
International Nuclear Information System (INIS)
Jilek, L.
1986-01-01
The technology has been selected of a circular plate bent into the shape of a trough, for pressing bottoms of pressure vessels from a circular plate of large diameter. The initial sheet is first bent in the middle by heating with the edges remaining straight. These are then welded longitudinally by electroslag welding and the circular shape is flame cut. The result will be a plate with a straight surface in the middle with raised edges which may be pressed into the desired shape. In this manner it is also possible to press pressure vessel bottoms with tube couplings from plates which are thickened in the middle and drilled; additional welding is then eliminated. Deformation from heat treatment may be avoided by the use of a fixture in the shape of a ring with a groove into which is fixed the edge of the bottom. During hardening of the bottom it will be necessary to care for the withdrawal of vapours and gases which would hamper uniform cooling. Bottom hardening with the grill and the cupola downwards has been proven. Deformation which occurs during treatment may to a certain extent be removed by calibration which cannot, however, be made without special fixtures and instruments. (J.B.)
-
When Medical News Comes from Press Releases-A Case Study of Pancreatic Cancer and Processed Meat.
Directory of Open Access Journals (Sweden)
Joseph W Taylor
Full Text Available The media have a key role in communicating advances in medicine to the general public, yet the accuracy of medical journalism is an under-researched area. This project adapted an established monitoring instrument to analyse all identified news reports (n = 312 on a single medical research paper: a meta-analysis published in the British Journal of Cancer which showed a modest link between processed meat consumption and pancreatic cancer. Our most significant finding was that three sources (the journal press release, a story on the BBC News website and a story appearing on the 'NHS Choices' website appeared to account for the content of over 85% of the news stories which covered the meta analysis, with many of them being verbatim or moderately edited copies and most not citing their source. The quality of these 3 primary sources varied from excellent (NHS Choices, 10 of 11 criteria addressed to weak (journal press release, 5 of 11 criteria addressed, and this variance was reflected in the accuracy of stories derived from them. Some of the methods used in the original meta-analysis, and a proposed mechanistic explanation for the findings, were challenged in a subsequent commentary also published in the British Journal of Cancer, but this discourse was poorly reflected in the media coverage of the story.
-
Auxiliary equipment and special techniques used for hot isostatic pressing
International Nuclear Information System (INIS)
Pfeffer, J.B.; Odebo, U.
1977-01-01
The largest use for hot isostatic pressing (HIP) in production is in the consolidation of powder. In principle, powder is filled into a capsule of metal or glass, and the capsule is evacuated, sealed and loaded into the hot isostatic press. Consolidation takes place in the hot isostatic press, at which time the consolidated capsule is removed from the press and the encapsulation material is removed from the consolidated powder body. In both densification and defect healing, HIP is carried out without encapsulating the material. This is possible as the materials that lend themselves to HIP healing initially have a high density without communicating pores; therefore, the material acts as its own capsule. Considerations outside of the hot isostatic press that must be taken into account are examined. Information is included on powder manufacture, fabrication of capsules, powder handling, capsule sealing, and loading and unloading the press
-
Strength-ductility relationships in intermediate purity hot-pressed beryllium
International Nuclear Information System (INIS)
Stonehouse, A.J.; Bielawski, C.A.; Paine, R.M.
1977-01-01
The strength of vacuum hot-pressed, intermediate purity beryllium may be substantially increased without sacrifice of the strain capacity of the present grade (S-65) through decrease in the average grain size. Tensile strength of 517 MPa, 0.2% offset yield strength of 414 MPa with minimum 3% tensile elongation in all test directions could be commercially achieved. The tangent modulus of such material is quite attractive and suffers only about 10% degradation from room temperature to 260 0 C. The tangent modulus is dramatically enhanced by the presence of a yield point. The ductility of the materials studied did not appear to be affected by the BeO content across the range of 0.5 to 2.0% using nominal -44 to -15 μm powder particle sizes. All fine-grained pressings exhibited yield points in the as-pressed condition. Either full-density or sub-density hot-pressed billets given a hot isostatic pressing treatment without the use of cans showed only slight yield points after the HIP treatment with essentially the same strength and ductility factors as in the pressed condition. A plot of grain size vs yield strength in the as-pressed condition projects to an intercept with the fracture strength line at about 3 μm grain size. A similar plot after the HIP treatment shows a yield strength line parallel to the fracture strength line with no projected intercept predicting a completely brittle material. (author)
-
Simulation Model of Automated Peat Briquetting Press Drive
Directory of Open Access Journals (Sweden)
A. A. Marozka
2012-01-01
Full Text Available The paper presents the developed fully functional simulation model of an automated peat briquetting press drive. The given model makes it possible to reduce financial and time costs while developing, designing and operating a double-stamp peat briquetting press drive.
-
Predictor of regulation of uranium dioxide powder pressing process
International Nuclear Information System (INIS)
Motta, Eduardo Souza; Araujo, Victor Hugo Leal de; Bernardelli, Sergio Henrique
2007-01-01
One of the most important steps of the uranium dioxide pellets fabrication used in the nuclear fuel elements is the green pellets pressing. The target density of the pellets after the sintering process determines the density of the green pellet. To meet the same sintered target density the green density may vary according to the powder characteristics. These variations implies in changing the regulation of the press for different powder's patches. The regulation done empirically imply in productivity loss and necessity of reprocessing the pellets pressed during the press regulation and also depends on the operator experience. At this work, was developed an artificial neural network feed forward back propagation to predict the press regulation, depending on the powder characteristics and the green pellet's target density. The results obtained at INB - Industrias Nucleares do Brasil S. A. during the fabrication of the fifth recharge of Angra II nuclear power plant are presented. (author)
-
Type synthesis for 4-DOF parallel press mechanism using GF set theory
He, Jun; Gao, Feng; Meng, Xiangdun; Guo, Weizhong
2015-07-01
Parallel mechanisms is used in the large capacity servo press to avoid the over-constraint of the traditional redundant actuation. Currently, the researches mainly focus on the performance analysis for some specific parallel press mechanisms. However, the type synthesis and evaluation of parallel press mechanisms is seldom studied, especially for the four degrees of freedom(DOF) press mechanisms. The type synthesis of 4-DOF parallel press mechanisms is carried out based on the generalized function(GF) set theory. Five design criteria of 4-DOF parallel press mechanisms are firstly proposed. The general procedure of type synthesis of parallel press mechanisms is obtained, which includes number synthesis, symmetrical synthesis of constraint GF sets, decomposition of motion GF sets and design of limbs. Nine combinations of constraint GF sets of 4-DOF parallel press mechanisms, ten combinations of GF sets of active limbs, and eleven combinations of GF sets of passive limbs are synthesized. Thirty-eight kinds of press mechanisms are presented and then different structures of kinematic limbs are designed. Finally, the geometrical constraint complexity( GCC), kinematic pair complexity( KPC), and type complexity( TC) are proposed to evaluate the press types and the optimal press type is achieved. The general methodologies of type synthesis and evaluation for parallel press mechanism are suggested.
-
The regulation of press freedoms (1863-1867
Directory of Open Access Journals (Sweden)
Laurence Coudart
2015-10-01
Full Text Available The main objective of this essay is to analyze the legislation affecting the press during the French Intervention and the Second Mexican Empire and establish their regulatory effects. These regulations are frequently ignored by the historiography. The article is limited to the origins, innovations, mechanisms and evolution of printing regulations during this period. As a whole, this allows the reader to observe the restrictive conception of press freedom held by the Mexican political class and their willingness, during the second half of the 19th Century, to turn to prohibitive, repressive, authoritarian and centralist legislation. The article also reveals the extent to which Imperial legislation and its logic of censorship were neither unprecedented nor sudden foreign impositions but instead the expressions of a long-lasting desire for government control over the press.
-
Results and problems in the development of machines employed in pressing technology
Energy Technology Data Exchange (ETDEWEB)
Dietrich, P; Hinne, H; Linke, L; Nerger, R
1980-08-01
Features specifications and technical improvements of nine GDR made briquetting presses from the Zemag Zeitz company. Briquetting presses have been produced by the company for more than 100 years, the present capacity of the machines ranges from 5.1 t/h to 20.4 t/h of nominal briquet production. Development trends are directed toward larger presses. The prototype PSA 400, based on the design of the four channel press PSA 300, will be tested in industrial operation during 1980/81. Various technical details on the general briquetting press design are enumerated, including experiences gained with steam or electric power operated presses, regulation of the pressing speed with a patented switch gear system, maintenance of crank gear bearings, greasing of steam driven presses, investigation of crack damages to the machine block, further measures for reducing wear of the pressing channel and mechanized welding methods for the channel overhaul. (In German)
-
Science coverage and the press
International Nuclear Information System (INIS)
Hawkes, N.
1992-01-01
The writer, a journalist, summarizes the discussion of the Chilton Seminar, February 1992, and discusses the problems of bridging the incomprehension gap between scientists and lay readers of the press. (Author)
-
A superconducting solenoid and press for permanent magnet fabrication
International Nuclear Information System (INIS)
Mulcahy, T. M.; Hull, J. R.
2002-01-01
For the first time, a superconducting solenoid (SCM) was used to increase the remnant magnetization of sintered NdFeB permanent magnets (PMs). In particular, improved magnetic alignment of commercial-grade PM powder was achieved, as it was axial die pressed into 12.7-mm diameter cylindrical compacts in the 76.2-mm warm bore of a 9-T SCM. The press used to compact the powder is unique and was specifically designed for use with the SCM. Although the press was operated in the batch mode for this proof of concept study, its design is intended to enable automated production. In operation, a simple die and punch set made of nonmagnetic materials was filled with powder and loaded into a nonmagnetic press tube. The cantilevered press tube was inserted horizontally, on a carrier manually advanced along a track, into the SCM. The robustness of the mechanical components and the SCM, in its liquid helium dewar, were specifically designed to allow for insertion and extraction of the magnetic powder and compacts, while operating at 9 T. Compaction was achieved by pressing the punches between the closed end of the press tube and the hydraulic cylinder mounted on the opposite end. Improvements up to 10% in magnetization and 20% in energy products of the permanent magnets were obtained, as the alignment fields were increased above the 2-T maximum field of the electromagnets used in industry. Increases in magnetization of 3% are significant in the mature sintered magnet industry
-
International Nuclear Information System (INIS)
Gavriluta, I.; Borlan, Z.; Alexandrescu, A; Budoi, G.; Bireescu, L.; Bireescu, G.
1999-01-01
In view of increasing productive use of fertilizer nutrients in crops an admixture of brown coal dust containing up to 40 % carbon ammonia lignosulfonate with 50 % lignoles dry matter as binding agent were used to press water soluble fertilizer sources with a total of N+P 2 O 5 +K 2 O content of up to 26 % in tablets. These may be manufactured at different N:P 2 O 5 :K 2 O ratios as for instance 1:1:1; 1:0.75:0.50 etc. Brown coal and coal refuse dust were used as matrix for inclusion while lignosulfonates served for binding the ingredients when pressing them in tablets of 15-20 g dry mass each. These were tested in accurate field experiments to compare the agronomic effectiveness of equal amounts of NPK in tablets with equivalent rates of powdered sources of nutrients in the same chemical forms. NPK pressed in tablets were applied locally along the plant row, while the powdered mixed fertilizer have been thoroughly mixed in the ploughed layer. Accurate field experiments have pointed out the higher agronomical effectiveness of NPK pressed in tablets as compared to equal amounts of NPK powdered and thoroughly mixed into the ploughed layer of soil. Indicators were higher yield increases per nutrient unit and higher degrees of apparent productive use of nutrients in crops. Refs. 4 (author)
-
Chen, Yang; Jernerén, Fredrik; Oliw, Ernst H
2017-07-01
Plants and fungi form jasmonic acid from α-linolenic acid. The first two steps of biosynthesis in plants occur by sequential transformation by 13S-lipoxygenase and allene oxide synthase (AOS). The biosynthesis in fungi may follow this classical scheme, but the only fungal AOS discovered so far are cytochromes P450 (CYP) fused to 8- and 9-dioxygenases (DOX). In the present report, we purified recombinant 9S-DOX-AOS of Fusarium oxysporum from cell lysate by cobalt affinity chromatography to near homogeneity and studied key residues by site-directed mutagenesis. Sequence homology with 8R-DOX-linoleate diol synthases (8R-DOX-LDS) suggested that Tyr414 catalyzes hydrogen abstraction and that Cys1051 forms the heme thiolate ligand. Site-directed mutagenesis (Tyr414Phe; Cys1051Ser) led to loss of 9S-DOX and 9S-AOS activities, respectively, but other important residues in the CYP parts of 5,8- and 7,8-LDS or 9R-AOS were not conserved. The UV-visible spectrum of 9S-DOX-AOS showed a Soret band at 409 nm, which shifted to 413 nm in the Cys1051Ser mutant. The 9S-AOS of the Tyr414Phe mutant transformed 9S-hydroperoxides of α-linolenic and linoleic acids to allene oxides/α-ketols, but it did not transform 13-hydroperoxides. We conclude that 9S- and 8R-DOX catalyze hydrogen abstraction at C-11 and C-8, respectively, by homologous Tyr residues. Copyright © 2017 Elsevier Inc. All rights reserved.
-
Lima,Wildberg Alencar; Campelo,Antônio Roberto Leite; Gomes,Rodrigo Luís Mousinho; Brandão,Daniella Cunha
2011-01-01
A pressão positiva intratorácica pode levar a alterações hemodinâmicas com repercussão no compartimento intracraniano, alterando a pressão intracraniana e a pressão de perfusão cerebral. Esse efeito pode se tornar mais intenso quando utilizados elevados valores de pressão positiva expiratória final. OBJETIVO: Medir o impacto que diferentes valores de pressão positiva expiratória final causam na pressão intracraniana, na pressão de perfusão cerebral e pressão arterial média. MÉTODO: O estudo f...
-
Press problem related to nuclear energy news reporting
International Nuclear Information System (INIS)
Arai, Mitsuo
2008-01-01
Since the event of Niigataken Chuetsu-oki Earthquake in 2007 and the subsequent press reports on damage of nuclear power station after it, a stance of media is being questioned. In order to clear this problem, basic organizational structure of the press related to nuclear energy news was analyzed. Local news department, social news department, science news department and economical news department involve in nuclear energy news the accordance with their own situations and concerns. This structure makes problem of nuclear energy news reporting complicated. Changing this system is required but very difficult. It is concluded that the press problem around nuclear energy news is strange. (author)
-
PRESS FREEDOM IN SINGAPORE AND MALAYSIA: DEFAMATION
Directory of Open Access Journals (Sweden)
Georgia Kate Chapman
2015-04-01
Full Text Available This paper focuses on the arguments around restriction on freedom of the press in the Strong States of Singapore and Malaysia. It assesses the presence of constraints on press freedoms in democratic western countries imposed by corporation rather than state and the similar effects that these constraints may have on bias present in publicly accessible news reporting. It argues that independence of the press does not just require protection from legal and executive regulation, but also protection from large media corporations and their political alignments. This report will assess the bias of reporting and news media publication that exists in Malaysia and Singapore due to legislative and regulatory constraints as opposed to bias that exist in the western liberal democratic nations of the United Kingdom (UK and the United States of America (USA due to Media Organisation control.
-
Lejosne, Solène; Mozer, F. S.
2017-09-01
We examine a characteristic feature of the magnetosphere-ionosphere coupling, namely, the persistent and latitudinally narrow bands of rapid westward ion drifts called the subauroral polarization streams (SAPS). Despite countless works on SAPS, information relative to their durations is lacking. Here we report on the first statistical analysis of more than 200 near-equatorial SAPS observations based on more than 2 years of Van Allen Probe electric drift measurements. First, we present results relative to SAPS radial locations and amplitudes. Then, we introduce two different ways to estimate SAPS durations. In both cases, SAPS activity is estimated to last for about 9 h on average. However, our estimates for SAPS duration are limited either by the relatively long orbital periods of the spacecraft or by the relatively small number of observations involved. Fifty percent of the events fit within the time interval [0;18] hours.
-
Zhou, Yirong; Breit, Bernhard
2017-12-22
An unprecedented asymmetric N-H functionalization of quinazolinones with allenes and allylic carbonates was successfully achieved by rhodium catalysis with the assistance of chiral bidentate diphosphine ligands. The high efficiency and practicality of this method was demonstrated by a low catalyst loading of 1 mol % as well as excellent chemo-, regio-, and enantioselectivities with broad functional group compatibility. Furthermore, this newly developed strategy was applied as key step in the first enantioselective formal total synthesis of (-)-chaetominine. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
-
Directory of Open Access Journals (Sweden)
Luciana Penna França
2017-12-01
Full Text Available Understanding the history of the amateur theater at the end of the XIXth century and the beginning of the XXth is possible, largely, because of the newspapers dedicated to the “theatrical affairs”. Such publications are important for the quantity and the diversity, revealing not only the place occupied by the theater in the capital, but also for the recognition of the press as a means of disclosure of plays, public education and opinion, artist projection, etc, not to mention personal affairs and requests, and the exchange of favors among managers and journalists. Even more, the press production of the dramatic amateurs clubs demonstrate the understanding of its role in the dissemination of ways to act and think beyond the stage and in the everyday life.
-
Mo, Jiayu; Müller, Thomas; Oliveira, João C A; Ackermann, Lutz
2018-06-25
C-H activation bears great potential for enabling sustainable molecular syntheses in a step- and atom-economical manner, with major advances having been realized with precious 4d and 5d transition metals. In contrast, we employed earth abundant, nontoxic iron catalysts for versatile allene annulations through a unique C-H/N-H/C-O/C-H functionalization sequence. The powerful iron catalysis occurred under external-oxidant-free conditions even at room temperature, while detailed mechanistic studies revealed an unprecedented 1,4-iron migration regime for facile C-H activations. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
-
The Social Construction of Leadership Styles: Insights from the Analysis of the Business Press
Singh, Gitanjali
2013-01-01
There is a certain fascination with analyzing leaders be it in any field but the main concern is how can we learn more about their characteristics, personality and most importantly their leadership styles. There is vast amount of theories which have been designed on leadership One way of examining it is by analyzing what they say that is in the interviews, speeches etc. These interview are available through a variety of sources like newspapers, business magazines etc. Business press plays an ...
-
Planet Press: an EGU initiative to bring geoscientific research to children
Ferreira, Bárbara
2016-04-01
Planet Press (http://www.egu.eu/education/planet-press/) is an EGU educational project that aims to get children (mainly 7-13 year olds), as well as their parents and educators, interested in and engaged with up-to-date scientific research and news. Planet Press articles are short versions of EGU press releases written in child-friendly language. Because EGU press releases cover research published in the various EGU scientific journals, Planet Press focuses on topics as varied as air pollution, glaciers, climate change, earthquakes, ocean sciences, droughts and floods, or space sciences. The texts are reviewed by both scientists and educators to make sure they are accurate and clear to their target audience. By sharing new and exciting geoscientific research with young kids, we hope to inspire them to develop an interest in the Earth, planetary and space sciences. In this presentation, we describe how the Planet Press idea came about, how the project is run, and the challenges and lessons learnt since the launch of this educational initiative in 2014. Planet Press, which has the support of the EGU Committee on Education, is made possible by the work of volunteer scientists and educators who review and translate the texts. We are grateful for the help of Jane Robb, former EGU Educational Fellow, with launching the project. Planet Press is inspired by Space Scoop (http://www.spacescoop.org/), an initiative by UNAWE, the EU-Universe Awareness organisation, that brings astronomy news to children every week.
-
Phase-Division-Based Dynamic Optimization of Linkages for Drawing Servo Presses
Zhang, Zhi-Gang; Wang, Li-Ping; Cao, Yan-Ke
2017-11-01
Existing linkage-optimization methods are designed for mechanical presses; few can be directly used for servo presses, so development of the servo press is limited. Based on the complementarity of linkage optimization and motion planning, a phase-division-based linkage-optimization model for a drawing servo press is established. Considering the motion-planning principles of a drawing servo press, and taking account of work rating and efficiency, the constraints of the optimization model are constructed. Linkage is optimized in two modes: use of either constant eccentric speed or constant slide speed in the work segments. The performances of optimized linkages are compared with those of a mature linkage SL4-2000A, which is optimized by a traditional method. The results show that the work rating of a drawing servo press equipped with linkages optimized by this new method improved and the root-mean-square torque of the servo motors is reduced by more than 10%. This research provides a promising method for designing energy-saving drawing servo presses with high work ratings.
-
Method for hot pressing irregularly shaped refractory articles
Steinkamp, William E.; Ballard, Ambrose H.
1982-01-01
The present invention is directed to a method for hot pressing irregularly haped refractory articles with these articles of varying thickness being provided with high uniform density and dimensional accuracy. Two partially pressed compacts of the refractory material are placed in a die cavity between displaceable die punches having compact-contacting surfaces of the desired article configuration. A floating, rotatable block is disposed between the compacts. The displacement of the die punches towards one another causes the block to rotate about an axis normal to the direction of movement of the die punches to uniformly distribute the pressure loading upon the compacts for maintaining substantially equal volume displacement of the powder material during the hot pressing operation.
-
Modularity of Pressing Tools for Screw Press Producing Solid Biofuels
Directory of Open Access Journals (Sweden)
Miloš Matúš
2012-01-01
Full Text Available This paper focuses on the development of the newly-patented structure of a screw briquetting machine for compacting biomass into a solid biofuel. The design of the machine is based on the results of a comprehensive study of the complicated process of biomass compaction. The patented structure meets two main goals: the elimination of axial forces, leading to increased lifetime of the bearings, and the new modular design of a pressing chamber and tools with their geometry based on the application of a mathematical model.
-
Waking up from the dream of reason; Rationality in the real world
Van Hezewijk, René
2007-01-01
Review Essay of: Gerd Gigerenzer, Adaptive Thinking: Rationality in the Real World. Oxford: Oxford University Press, 2000. 344 pp. ISBN 0–19–513622–5 (hbk). Gerd Gigerenzer, Reckoning with Risk: Learning to Live with Uncertainty. London: Allen Lane/Penguin, 2002. 310 pp. ISBN 0–713–99512–2
-
Dependently Typed Programming with Domain-Specific Logics
2011-02-28
Avijit, David Baelde, Lars Birkedal, Kaustuv Chaudhuri, Derek Dreyer, Joshua Dun- field, Deepak Garg, Daniel Lee, Ruy Ley-Wild, William Lovas, Chris...MIT Press, 2002. R. L. Constable, S. F. Allen, H. M. Bromley, W. R. Cleaveland, J. F. Cremer , R. W. Harper, D. J. Howe, T. B. Knoblock, N. P. Mendler
-
STS-46 TCDT Slideware Training and Photo Session
1992-01-01
The crew of STS-46, Commander Loren J. Shriver, Pilot Andrew M. Allen, Payload Specialist Franco Malerba, Mission Specialists Jeffrey A. Hoffman, Franklin R. Chang-Diaz, Claude Nicollier, and Marsha S. Ivins are seen introducing themselves and discussing the mission during a photo session. The crew then answers questions from the press.
-
Directory of Open Access Journals (Sweden)
Iosif DUMITRESCU
2015-05-01
Full Text Available In municipal solid waste, aluminum is the main nonferrous metal, approximately 80- 85% of the total nonferrous metals. The income per ton gained from aluminum recuperation is 20 times higher than from glass, steel boxes or paper recuperation. The object of this paper is the design of a 300 kN press for aluminum box bundling.
-
Nanoindentation hardness of hot-pressed boron suboxide
International Nuclear Information System (INIS)
Machaka, Ronald; Derry, Trevor E.; Sigalas, Iakovos
2011-01-01
Highlights: → The load-displacement indentation response of hot-pressed B 6 O is measured and analysed. → The nanoindentation hardness of hot-pressed boron suboxide is reported. → An approach is developed to simulate multi-cycling loading load-displacement curves. → A comprehensive model inter-comparison study of the ISE in hot-pressed B 6 O is also presented. → The fractal dimension is a better measure of ISE than the Meyer's index. - Abstract: The existence of the indentation size effect implies the absence of a single hardness value for the material under investigation especially at low applied loads. In this paper we present an investigation of the indentation size dependence behaviour of nanoindentation hardness in boron suboxide ceramic compacts prepared by uniaxial hot-pressing. Berkovich nanohardness indentations were conducted and analyzed accordingly. In addition to the ordinary Oliver and Pharr method of nanoindentation data analysis, a quantitative approach for the loading curve analysis is proposed. Using the proposed approach, the description and characterization of the observed indentation size effect through the application of the Meyer's law, and the classical and the modified proportional specimen resistance models as well as the multi-fractal scaling law was conducted and is reported. The load-independent hardness values deduced from our quantitative approach are comparable to the results calculated with conventional methods, especially with the multi-fractal scaling law.
-
Press releases — the new trend in science communication
DEFF Research Database (Denmark)
Autzen, Charlotte
2014-01-01
Scientific institutions have for a long time known the importance of framing and owning stories about science They also know the effective way of communicating science in a press release This is part of the institution’s public relations. Enhanced competition among research institutions has led...... to a buildup of communicative competences and professionalization of public relations inside the institutions and the press release has become an integrated part of science communication from these institutions. Changing working conditions in the media, where fewer people have to publish more, have made press...... releases from trustworthy scientific institutions into free and easily copied content for the editors. In this commentary I investigate and discuss the communicative ecosystem of the university press release. I especially take a close look at the role of the critical and independent science journalist...
-
Ali Asghar Firuzjaeyan; Mojtaba Firuzjaeyan; Behdad Sadeghi
2015-01-01
The present study aimed to investigate the effect of organizational culture on organizational commitment of teachers. in this study Organizational commitment is based on Allen and Meyer: affective, continuance and normative commitment. The studied organizational culture is based on Denison four-dimension theory. Adaptability, Mission, Involvement and Consistency. Due to a few empirical studies in this region, the data were collected among 156 teachers of Bandpay region. The data were collecte...
-
Effects of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses
X.L. Luo; Junyong Zhu; Roland Gleisner; H.Y. Zhan
2011-01-01
This article reports the effect of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses. A wet cellulosic substrate of bleached kraft eucalyptus pulp and two wet sulfite-pretreated lignocellulosic substrates of aspen and lodgepole pine were pressed to various moisture (solids) contents by variation of pressing pressure and pressing...
-
Charisma and Counterculture: Allen Ginsberg as a Prophet for a New Generation
Directory of Open Access Journals (Sweden)
Yaakov Ariel
2013-01-01
Full Text Available The cultural role of Allen Ginsberg does not fit a typical Weberian model of charisma. The avant-garde poet was an outstanding personality and possessed an unusual ability to affect people. He played a vital role in expanding the boundaries of personal freedom in America of the 1950s–1990s, blazing new paths for spiritual, communal and artistic expression. Serving as a father figure for the counterculture—a symbol of an alternative set of cultural norms, lifestyles and literary forms—Ginsberg was a charismatic counter-leader, with no clearly defined followers or movement. As a leader in a more liberated era, he offered energy, ideas, inspiration, and color, but no structure or authority. Instead he was a prophet of freedom, calling on people to express themselves openly, to expand and experiment. This role demanded charisma but of a different kind—one that was more spiritual and less organizational or hierarchical. This article follows Gary Dickson’s essay “Charisma, Medieval and Modern,” in offering a suggestive analysis of and supplement to Weber’s understanding of charisma. The article grapples with the concept of charisma in relation to a generation that resented rigid structures and authorities.
-
International Nuclear Information System (INIS)
Bayle, J.P.; Mezeix, P.; Tronche, E.; Delette, G.; Remy, E.; Picart, S.
2014-01-01
This study presents an approach based on the use of pellet forming numerical digital simulation which enables optimization of the die pressing cycle. Semi-empirical mechanical models were used in an FEM code, CAST3M. Specific powder characterizations were also performed to supply the mechanical parameters of compaction model. The methodology for the identification of five main coefficients (index flow, elastic and plastic parameters) was used with two different powders. The results show that the axial distribution of frictional forces may be changed during die pressing by a modification of the sequence of punch displacements. According to these results and the literature, the pressing cycle can be considered to have an influence on the shape of a sintered pellet through the axial distribution of green density. The process used for the identification of the Cam-Clay model coefficients seems to be in good agreement, even if the changes in certain parameters remain rather unclear and will require follow-up studies to confirm some of the results. The experimental device used produces good quality pellets, and the Radial Open Die Modulus remains the first choice for reduced pellet damage. Much work still remains to be done to fully define the identification process and create the most representative simulations possible before launching an industrial version of a nuclearized press, planned for the last quarter of year 2014. (authors)
-
Energy Technology Data Exchange (ETDEWEB)
Lu, Erli; Tuna, Floriana; Kaltsoyannis, Nikolas; Liddle, Stephen T. [School of Chemistry, The University of Manchester (United Kingdom); Lewis, William [School of Chemistry, The University of Nottingham (United Kingdom)
2016-08-08
We report uranium(IV)-carbene-imido-amide metalla-allene complexes [U(BIPM{sup TMS})(NCPh{sub 3})(NHCPh{sub 3})(M)] (BIPM{sup TMS}=C(PPh{sub 2}NSiMe{sub 3}){sub 2}; M=Li or K) that can be described as R{sub 2}C=U=NR' push-pull metalla-allene units, as organometallic counterparts of the well-known push-pull organic allenes. The solid-state structures reveal that the R{sub 2}C=U=NR' units adopt highly unusual cis-arrangements, which are also reproduced by gas-phase theoretical studies conducted without the alkali metals to remove their potential structure-directing roles. Computational studies confirm the double-bond nature of the U=NR' and U=CR{sub 2} interactions, the latter increasingly attenuated by potassium then lithium when compared to the hypothetical alkali-metal-free anion. Combined experimental and theoretical data show that the push-pull effect induced by the alkali metal cations and amide auxiliary gives a fundamental and tunable structural influence over the C=U{sup IV}=N units. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)
-
Atlas of hot isostatic beryllium powder pressing diagrams
International Nuclear Information System (INIS)
Stoev, P.I.; Papirov, I.I.; Tikhinskij, G.F.; Vasil'ev, A.A.
1995-01-01
Diagrams of hot isotopic pressing (HIP) of beryllium powder with different grain size in a wide range of pressing parameters are built by mathematical modeling methods. The HIP diagrams presented are divided into 3 groups: parametric dependencies D=f(P,T); technological HIP diagrams; compacting mechanisms. The created data bank permits to optimise beryllium powder HIP with changing parameters. 4 refs., 23 figs
-
Local and international press digest
2008-01-01
The following are the top stories in the Maltese and the international press today. The Times gives prominence to the Prime Minister's flying visit to Geneva yesterday, where he signed a research cooperation agreement with CERN, the European nuclear research organisation.
-
Pressing and tubes rolling out of tungsten of gas phase deposition
International Nuclear Information System (INIS)
Korolev, Yu.M.; Kosachev, L.S.; Semiletov, S.S.; Solov'ev, V.F.; Sorkin, V.A.
1987-01-01
The possibility of increasing ductility of tubes of tungsten fluoride using heat treatment and plastic deformation- pressing and thermal rolling are studied. When designing the processes of treatment it should be necessarily taken into account that structural state of initial blanks as well as the ratio of deformations in radial and tangential directions under pressing with a rigid needle strongly affects technological properties of pressed tubes. The columnar structure of blanks is undesirable for its embrittlement affects the pressed tubes
-
Effect of hot isostatic pressing on reaction-bonded silicon nitride
Watson, G. K.; Moore, T. J.; Millard, M. L.
1984-01-01
Specimens of nearly theoretical density have been obtained through the isostatic hot pressing of reaction-bonded silicon nitride under 138 MPa of pressure for two hours at 1850, 1950, and 2050 C. An amorphous phase that is introduced by the hot isostatic pressing partly accounts for the fact that while room temperature flexural strength more than doubles, the 1200 C flexural strength increases significantly only after pressing at 2050 C.
-
Charging of the Van Allen Probes: Theory and Simulations
Delzanno, G. L.; Meierbachtol, C.; Svyatskiy, D.; Denton, M.
2017-12-01
The electrical charging of spacecraft has been a known problem since the beginning of the space age. Its consequences can vary from moderate (single event upsets) to catastrophic (total loss of the spacecraft) depending on a variety of causes, some of which could be related to the surrounding plasma environment, including emission processes from the spacecraft surface. Because of its complexity and cost, this problem is typically studied using numerical simulations. However, inherent unknowns in both plasma parameters and spacecraft material properties can lead to inaccurate predictions of overall spacecraft charging levels. The goal of this work is to identify and study the driving causes and necessary parameters for particular spacecraft charging events on the Van Allen Probes (VAP) spacecraft. This is achieved by making use of plasma theory, numerical simulations, and on-board data. First, we present a simple theoretical spacecraft charging model, which assumes a spherical spacecraft geometry and is based upon the classical orbital-motion-limited approximation. Some input parameters to the model (such as the warm plasma distribution function) are taken directly from on-board VAP data, while other parameters are either varied parametrically to assess their impact on the spacecraft potential, or constrained through spacecraft charging data and statistical techniques. Second, a fully self-consistent numerical simulation is performed by supplying these parameters to CPIC, a particle-in-cell code specifically designed for studying plasma-material interactions. CPIC simulations remove some of the assumptions of the theoretical model and also capture the influence of the full geometry of the spacecraft. The CPIC numerical simulation results will be presented and compared with on-board VAP data. This work will set the foundation for our eventual goal of importing the full plasma environment from the LANL-developed SHIELDS framework into CPIC, in order to more accurately
-
Treatment of the press residues of pressed grapes on an industrial scale
Energy Technology Data Exchange (ETDEWEB)
1978-04-24
EtOH and tartaric acid are recovered from press residues of grapes by distillation and concentration of the EtOH and extraction of the dried residue after removal of seeds with a mixture of H/sub 2/O and mineral acid. Vegetable oil is extracted from the seeds. Collidal substances are coagulated by roasting prior to extraction of tartaric acid. The grape skins are recovered in flake form.
-
Menz, A.; Kistler, L. M.; Mouikis, C.; Spence, H. E.; Henderson, M. G.; Matsui, H.
2017-12-01
It has been shown that electric field strength and night-side plasma sheet density are the two best predictors of the adiabatic energy gain of the ring current during geomagnetic storms (Liemohn and Khazanov, 2005). While H+ dominates the ring current during quiet times, O+ can contribute substantially during geomagnetic storms. Substorm activity provides a mechanism to enhance the energy density of O+ in the plasma sheet during geomagnetic storms, which is then convected adiabatically into the inner-magnetosphere. Using the Van Allen Probes data in the the plasma sheet source region (defined as L>5.5 during storms) and the inner magnetosphere, along with LANL-GEO data to identify substorm injection times, we show that adiabatic convection of O+ enhancements in the source region can explain the observed enhancements in the inner magnetosphere. We use the UNH-IMEF electric field model to calculate drift times from the source region to the inner magnetosphere to test whether enhancements in the inner-magnetosphere can be explained by dipolarization driven enhancements in the plasma sheet source hours before.
-
Kargel, J. S.; Fischer, L.; Furfaro, R.; Huggel, C.; Korup, O.; Leonard, G. J.; Uhlmann, M.; Wessels, R. L.; Wolfe, D. F.
2009-12-01
Medial moraines are visually dominant structures of most large valley glaciers in the Copper River Basin (CRB), Alaska. Areally extensive but thin (usually rock falls and talus creep; rocks delivered via snow and ice avalanches; ingestion of lateral moraines along tributary convergences; and basal erosional debris. Evidence indicates that in CRB glaciers, discrete large avalanches predominate as the major contributors of moraine mass. Subglacial erosional debris is predominantly pulverized to small grain sizes and flushed. Many large, young avalanches exist on CRB glaciers. Evidence from colorimetry indicates that many medial moraines actually are landslides that have been sheared and swept downglacier, thus mimicking the form of other types of medial moraines formed where tributaries coalesce and flow down valley. Landcover classification of ASTER imagery, qualitative observations from air photos, and semiquantitative field-based estimations of rock color types indicate that on Allen Glacier, and other CRB glaciers, landslides are the sources of most medial moraines. On Allen and Root Glacier, for example, we see very few boulders with obvious signs of basal abrasion, whereas nearly all boulders exhibit signs of irregular fracture, for example in landslides. Such landslides have large effects on the thermal and mass balance of CRB glaciers, sometimes opposing or in other cases accentuating the effects of global/regional climate change. Considering the link between landslides and seismicity, and that Magnitude 8-9 earthquakes may occur nearby only about once a century, which is also the characteristic response time of large glaciers to climate shifts, seismicity must be considered along with climate change induced glacier responses in the CRB. Ultimately, climate has the final word, and already this is evident in the glacier record. Glacial flour is probably almost entirely from bed erosion. We will present estimates of the contributions of landslides and
-
Nanoindentation hardness of hot-pressed boron suboxide
Energy Technology Data Exchange (ETDEWEB)
Machaka, Ronald, E-mail: Ronald.Machaka@wits.ac.za [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Chemical and Metallurgical Engineering, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa); Derry, Trevor E. [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Physics, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa); Sigalas, Iakovos [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Chemical and Metallurgical Engineering, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa)
2011-07-15
Highlights: {yields} The load-displacement indentation response of hot-pressed B{sub 6}O is measured and analysed. {yields} The nanoindentation hardness of hot-pressed boron suboxide is reported. {yields} An approach is developed to simulate multi-cycling loading load-displacement curves. {yields} A comprehensive model inter-comparison study of the ISE in hot-pressed B{sub 6}O is also presented. {yields} The fractal dimension is a better measure of ISE than the Meyer's index. - Abstract: The existence of the indentation size effect implies the absence of a single hardness value for the material under investigation especially at low applied loads. In this paper we present an investigation of the indentation size dependence behaviour of nanoindentation hardness in boron suboxide ceramic compacts prepared by uniaxial hot-pressing. Berkovich nanohardness indentations were conducted and analyzed accordingly. In addition to the ordinary Oliver and Pharr method of nanoindentation data analysis, a quantitative approach for the loading curve analysis is proposed. Using the proposed approach, the description and characterization of the observed indentation size effect through the application of the Meyer's law, and the classical and the modified proportional specimen resistance models as well as the multi-fractal scaling law was conducted and is reported. The load-independent hardness values deduced from our quantitative approach are comparable to the results calculated with conventional methods, especially with the multi-fractal scaling law.
-
Forming of AHSS using Servo-Presses
Groseclose, Adam Richard
Stamping of Advanced High Strength Steel (AHSS) alloys poses several challenges due to the material's higher strength and low formability compared to conventional steels and other problems such as (a) inconsistency of incoming material properties, (b) ductile fracture during forming, (c) higher contact pressure and temperature rise during forming, (d) higher die wear leading to reduced tool life, (e) higher forming load/press capacity, and (f) large springback leading to dimensional inaccuracy in the formed part. [Palaniswamy et. al., 2007]. The use of AHSS has been increasing steadily in automotive stamping. New AHSS alloys (TRIP, TWIP) may replace some of the Hot Stamping applications. Stamping of AHSS alloys, especially higher strength materials, 780 MPa and higher, present new challenges in obtaining good part definition (corner and fillet radii), formability (fracture and resulting scrap) and in reducing springback. Servo-drive presses, having the capability to have infinitely variable and adjustable ram speed and dwell at BDC, offer a potential improvement in quality, part definition, and springback reduction especially when the infinitely adjustable slide motion is used in combination with a CNC hydraulic cushion. Thus, it is desirable to establish a scientific/engineering basis for improving the stamping conditions in forming AHSS using a servo-drive press.
-
Directory of Open Access Journals (Sweden)
Rudolf Prevratil
1991-09-01
Full Text Available Danske teleselskaber overvejer at etablere sig som kabeloperatører i Polen, mens et amerikansk selskab allerede er igang i Warszawa og Krakow. Franske lokalradionetworks opretter filialer i Polen og Tjekko- slovakiet. Den tjekkiske statsradio stiller sendenet til rådighed for Radio Free Europe. Springer-koncernen opretter en "østtysk" pendant til Bild, hvis redaktionelle hovedlinje lægger sig op ad de dybe sociale frustrati- oner, der fulgte med DDR's indlemmelse i BDR. Maxwell, Hersant og Berlusconi m.fl. etablerer sig alene eller med lokale konstellationer inden for trykt presse i flere øst- og mellemeuropæiske stater. Samtidig for- søger den tidligere undergrundspresse at vinde økonomisk og politisk fodfæste inden for markedets og "det legale samfunds" rammer, i kon- kurrence med fortidens mediemutanter og vestlige mediekoncerner. Rudolf Prevratils artikel er en refleksion over en del af de problemer, primært af økonomisk og politisk art, som har tårnet sig op for den tjek- koslovakiske presse efter fløjlsrevolutionen i november 1989. Den giver et billede af dagens situation og får gennem sine analyser påvist, at etab- lingen af en demokratisk presse i Tjekkoslovakiet ikke alene er afhængig af "hjælp udefra", men i nok så høj grad forudsætter et net af sociale og kulturelle udviklingsprocesser, som både anerkender opgøret med for- tiden og vedkender sig den historiske arv. Artiklen er oversat fra engelsk af Per Jauert.
-
One-way data transfer for PLC to VME status reporting at the Advanced Photon Source
International Nuclear Information System (INIS)
Stein, S.J.
1993-01-01
The Personnel Safety System for the experimental beamlines at the Advanced Photon Source will use a large number of Allen Bradley Programmable Logic Controllers (PLC) to replace conventional relay logic. PLCs allow for the design of a very advanced safety system that can handle a large number of I/O points. Certain situations Require monitoring of the safety system from various locations around the storage ring via EPICS OPI (operator interface)consoles. This presentation covers the method of choice for transferring data from the Personnel Safety System into an EPICS database. Specifics on PLC ladder design, EPICS database design, and hardware selection are also discussed
-
A Simplified Model of an Offset Ram Press for Sunflower Oil ...
African Journals Online (AJOL)
This paper presents the theoretical analysis of a simplified model of a ram press. The design of the ram press is based on the classical slider-crank mechanism. A force analysis of the press was performed for several successive positions of the driving lever (handle) and for a range of values of certain dimensionless ...
-
Freedom of the Press In the Scope of Human Rights
Directory of Open Access Journals (Sweden)
Sri Ayu Astuti
2014-01-01
Full Text Available Freedom of expression and press freedom is the embodiment of the recognition of human rights. Freedom of expression is also the existence of press to disclose the news with honesty and do not get a pressure to deliver the news to the public space, which in news production is known as a work of journalism. Now the press has gained freedom of expression in the news production process which is guaranteed in the state constitution. Although Article 28 of the Constitution of the Republic of Indonesia 1945 does not point directly at the press, However, Article 28 F emphasis on processing and storage as well as ownership, excavations to information. It also contains provisions on the freedom of expression of others, which should be valued and respected. It shows equality for everyone in his position before the law in accordance with Article 27 1945 Constitution, which emphasizes the recognition of constitutional rights that belong to every person in the state of law in the Republic of Indonesia. Thus the press, which have freedom of expression in the writings of journalistic works are required to be responsible for the published news. So as not to face the legal issues and criminalization, then press should perform tasks and functions to enforce ethics as the precautionary principle when processing the news and broadcast it to the public space, as well as upholding human rights. How To Cite: Astuti, S. (2014. Freedom of the Press In the Scope of Human Rights. Rechtsidee, 1(1, 101-118. doi:http://dx.doi.org/10.21070/jihr.v1i1.96
-
Pinkas, Jiří; Gyepes, Róbert; Císařová, Ivana; Kubišta, Jiří; Horáček, Michal; Mach, Karel
2015-04-28
The titanocene-ethene complex [Ti(II)(η(2)-C2H4)(η(5)-C5Me5)2] (1) with simple internal alkynes R(1)C≡CR(2) gives complexes [Ti(II)(η(2)-R(1)C≡CR(2))(η(5)-C5Me5)2] {R(1), R(2): Ph, Ph (3), Ph, Me (4), Me, SiMe3 (5), Ph, SiMe3 (6), t-Bu, SiMe3 (7), and SiMe3, SiMe3 (8). In contrast, alkynes with R(1) = Me and R(2) = t-Bu or i-Pr afford allene complexes [Ti(II)(η(2)-CH2=C=CHR(2))(η(5)-C5Me5)2] (11) and (12), whereas for R(2) = Et a mixture of alkyne complex (13A) and minor allene (13) is obtained. Crystal structures of 4, 6, 7 and 11 have been determined; the latter structure proved the back-bonding interaction of the allene terminal double bond. Only the synthesis of 8 from 1 was inefficient because the equilibrium constant for the reaction [1] + [Me3SiC≡CSiMe3] ⇌ [8] + [C2H4] approached 1. Compound 9 (R(1), R(2): Me), not obtainable from 1, together with compounds 3–6 and 10 (R(1), R(2): Et) were also prepared by alkyne exchange with 8, however this reaction did not take place in attempts to obtain 7. Compounds 1 and 3–9 display the longest-wavelength electronic absorption band in the range 670-940 nm due to the HOMO → LUMO transition. The assignment of the first excitation to be of predominantly a b2 → a1 transition was confirmed by DFT calculations. The calculated first excitation energies for 3–9 followed the order of hypsochromic shifts of the absorption band relative to 8 that were induced by acetylene substituents: Me > Ph ≫ SiMe3. Computational results have also affirmed the back-bonding nature in the alkyne-to-metal coordination.
-
A virtual model of the bench press exercise.
Rahmani, Abderrahmane; Rambaud, Olivier; Bourdin, Muriel; Mariot, Jean-Pierre
2009-08-07
The objective of this study was to design and validate a three degrees of freedom model in the sagittal plane for the bench press exercise. The mechanical model was based on rigid segments connected by revolute and prismatic pairs, which enabled a kinematic approach and global force estimation. The method requires only three simple measurements: (i) horizontal position of the hand (x(0)); (ii) vertical displacement of the barbell (Z) and (iii) elbow angle (theta). Eight adult male throwers performed maximal concentric bench press exercises against different masses. The kinematic results showed that the vertical displacement of each segment and the global centre of mass followed the vertical displacement of the lifted mass. Consequently, the vertical velocity and acceleration of the combined centre of mass and the lifted mass were identical. Finally, for each lifted mass, there were no practical differences between forces calculated from the bench press model and those simultaneously measured with a force platform. The error was lower than 2.5%. The validity of the mechanical method was also highlighted by a standard error of the estimate (SEE) ranging from 2.0 to 6.6N in absolute terms, a coefficient of variation (CV) or =0.99 for all the lifts (pbench press exercises in both field and laboratory conditions.
-
International Nuclear Information System (INIS)
Liang, Z.X.; Zhao, T.S.; Xu, C.; Xu, J.B.
2007-01-01
The durability of the membrane electrode assembly (MEA) for direct methanol fuel cells (DMFCs) is one of the most critical issues to be addressed before widespread commercialization of the DMFC technology. In this work, we investigated the effect of the hot-pressing duration on the performance and durability of the MEA prepared by hot-pressing technique. It was found that the 60-min hot pressing at 135 deg. C under the pressure of 4.0 MPa yielded a significantly improved MEA durability than did the 3-min hot pressing (a typical duration in practice) under the same condition, but no substantial difference was found in the cell performance of the MEAs prepared with the two different hot-pressing durations. The reason why the hot-pressing duration had no significant effect on cell performance is explained based on X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR) characterizations of the changes in the physiochemical properties of MEAs and their constituent components, including the anode, cathode and Nafion membrane, before and after hot pressing with different durations
-
New Realities for Scholarly Presses in Trying Economic Times
Blakesley, David
2014-01-01
The author explains that Parlor Press is an independent publisher and distributor of scholarly and trade books in print and digital formats. It was founded in 2002 to address the need for an alternative scholarly, academic press attentive to emergent ideas and forms while maintaining the highest possible standards of quality, credibility, and…
-
Corporate social responsibility's discourse in lithuanian business press
Marčenkovas, Marius
2014-01-01
The object of this master work is corporate social responsibility's (CSR) discourse. The purpose of this work is to analyze how Lithuanian business press presents CSR topic. The main tasks to reach this purpose are: overview and compare CSR definitions; analyze media impact to CSR; analyze and summarize CSR discourse in Lithuanian business press. Literature analysis, synthesis and comparative methods were used to drawn conclusions. After the literature analysis of such scientists as Ph. Kotle...
-
Press/Pulse: Explaining selective terrestrial extinctions at the Cretaceous/Palaeogene boundary
Arens, Nan Crystal
2010-05-01
Single-cause mass extinction scenarios require extreme conditions to generate sufficiently strong kill mechanisms. Such dire effects are commonly at odds with the taxonomic selectivity that characterizes most extinction events. In response, some researchers have proposed that the interaction of a variety of factors typify episodes of elevated extinction. Previous work (Arens & West 2008 Paleobiology 34:456-471) has shown that a combination of press and pulse disturbances increases the probability of elevated extinction. The press/pulse contrast is borrowed from community ecology, where researchers have long recognized that the ecological response to long-term stress differs from that of an instantaneous catastrophe. Scaled to the macroevolutionary level, press disturbances alter community composition by placing multigenerational stress on populations. Press disturbances do not necessarily cause mortality, but reduce population size by a variety of mechanisms such as curtailed reproduction. Pulse disturbances are sudden catastrophic events that cause extensive mortality. Either press or pulse disturbances of sufficient magnitude can cause extinction, however elevated extinction occurs more commonly during the coincidence of lower-magnitude press and pulse events. The Cretaceous/Palaeogene (K/P) extinction is one of the best examples of a press/pulse extinction. Deccan Trap volcanism, which straddled the K/P boundary, altered atmospheric composition and climate. This episodic volcanism likely contributed to the climate instability observed in terrestrial ecosystems and exerted press stress. Pulse disturbance was produced by bolide impact, which punctuated the end of the Cretaceous. The press/pulse mechanism also more effectively explains selectivity in terrestrial vertebrate and plant extinctions at the K/P boundary than do single-mechanisms scenarios. For example, why do environmentally sensitive vertebrates such as amphibians experience no extinction? And why do
-
A Low-Cost Auto-Stop Hydraulic Press for Making KBr Disc
Hon, Ping-Kay
1998-05-01
A hydraulic press fitted with an adjustable torque wrench, together with a stand made of iron bars will form an auto-stop hydraulic press for making KBr disc in IR studies. Total material cost is about $100. All parts are readily available from the local hardware stores. The modified torque wrench is also useful to replace the lever in the standard laboratory press.
-
Use of Awamori-pressed Lees and Tofu Lees as Feed Ingredients for Growing Female Goats
Directory of Open Access Journals (Sweden)
Itsuki Nagamine
2012-12-01
Full Text Available Okinawan Awamori is produced by fermenting steamed indica rice with black mold, yeast, and water. Awamori-pressed lees is a by-product of the Awamori production process. Tofu lees is a by-product of the Tofu production process. This research consisted of two experiments conducted to elucidate whether or not dried Awamori-pressed lees and Tofu lees can be used as a mixed feed ingredient for raising female goats. In experiment 1, digestion trials were conducted to ascertain the nutritive values of dried Awamori-pressed lees and dried Tofu lees for goats. The digestible crude protein (DCP and total digestible nutrients (TDN contents of dried Awamori-pressed lees and Tofu lees were 22.5%, 22.5% (DCP, and 87.2%, 94.4% (TDN respectively. In experiment 2, 18 female goats (Japanese Saanen×Nubian, three months old, body weight 15.4±0.53 kg were divided into three groups of six animals (control feed group (CFG, Awamori-pressed lees mixed feed group (AMFG, Tofu lees mixed feed group (TMFG. The CFG control used feed containing 20% soybean meal as the main protein source, while the AMFG and TMFG treatments used feed mixed with 20% dried Awamori-pressed lees or dried Tofu lees. The groups were fed mixed feed (volume to provide 100 g/d increase in body weight twice a day (10:00, 16:00. The klein grass hay and water was given ad libitum. The hay intake was measured at 08:00 and 16:00. Body weight and size measurements were taken once a month. At the end of the experiment, a blood sample was drawn from the jugular vein of each animal. The DCP and TDN intakes in AMFG and TMFG showed no significant difference to the CFG. Cumulative measurements of growth in body weight, withers height, chest depth, chest girth, and hip width over the 10 mo period in the AMFG and TMFG were similar to the CFG. By contrast, cumulative growth in body length and hip height in the AMFG and TMFG tended to be larger than the CFG. Cumulative growth in chest width in the AMFG was
-
A new cleaner process to prepare pressing-powder
Directory of Open Access Journals (Sweden)
Shu, Z.
2011-10-01
Full Text Available An alternative cleaner process of pressing-powder preparation, based on filter-pressing and a novel granulation method, is presented to substitute the existing spray-drying process. In the new process, about two-thirds of wet-milled slurry is filterpressed, dried and milled into dry fine powder. The other one-third of the slurry and the as-obtained dry fine powder are spray-mixed in a tower, where the slurry droplets adsorb the dry powder to form granules which are then rolled and dried into a useable pressing-powder for tile pressing. The key stages, filter-pressing and granulation (consisting of spray-mixing and rolling treatment, are specially studied. The pressing-powder properties and pressing/firing behavior, and, energy/water consumption and pollution emission data are presented, and a comparison between the new process and the existing spray-drying process is made. This new process has been found to be feasible and provides a pressing-powder with suitable properties, together with lower energy/water consumption and pollution emission (particulate matter and CO2.
En ese trabajo se presenta un proceso alternativo y más ecológico para la preparación de polvo de prensas por molienda vía húmeda de las materias primas. En este proceso la eliminación del agua de la suspensión obtenida en la etapa de molienda, en vez de realizarse por secado por atomización, se lleva a cabo en dos etapas, en una primera etapa dos tercios de esta suspensión se filtro-prensan, posteriormente se secan y molturan hasta obtener un polvo seco micronizado. Este material seco se introduce por la parte superior de una torre granuladora, en la que se pulveriza el tercio de la suspensión restante por la parte inferior, de forma que las gotas adsorben sobre su superficie las partículas secas formando gránulos, que posteriormente se compactan por rodamiento (“rolling”, y finalmente se secan hasta la humedad requerida para el prensado. En
-
Quid pro quo: tobacco companies and the black press.
McCandless, Phyra M; Yerger, Valerie B; Malone, Ruth E
2012-04-01
We explored the relationship between tobacco companies and the Black press, which plays an important role in conveying information and opinions to Black communities. In this archival case study, we analyzed data from internal tobacco industry documents and archives of the National Newspaper Publishers Association (NNPA), the trade association of the Black press. In exchange for advertising dollars and other support, the tobacco industry expected and received support from Black newspapers for tobacco industry policy positions. Beginning in the 1990s, resistance from within the Black community and reduced advertising budgets created counterpressures. The tobacco industry, however, continued to sustain NNPA support. The quid pro quo between tobacco companies and the Black press violated journalistic standards and represented an unequal trade. Although numerous factors explain today's tobacco-related health disparities, the Black press's service to tobacco companies is problematic because of the trust that the community placed in such media. Understanding the relationship between the tobacco industry and the NNPA provides insight into strategies that the tobacco industry may use in other communities and countries.
-
TA-03-0035 Press Building – D&D
Energy Technology Data Exchange (ETDEWEB)
Hasenack, Marvin Leroy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2017-11-02
The Press Building was constructed in 1954 with 15,073 ft2 of floor space. It was built to house a 5000 ton double action Lake Erie hydraulic press and a uranium casting area. Missions included uranium activities associated with the Nuclear Weapons and Rover Rocket programs. At the end of the Rover program, the building continued to support various uranium materials science projects until the building was placed into a cold and dark status in 2013 and then was demolished in 2017. The building interior, the press, and associated systems were radiological contaminated and disposed of as low level waste. The demolition of this building opened up valuable real estate in the TA-3 area for the future construction of an ~11,000 Sq. Ft. Biosafety Level 2 laboratory and office building. This building will support the ongoing Bioscience Division mission at the laboratory.
-
Czech Academy of Sciences Publication Activity Database
Santolík, Ondřej; Macúšová, Eva; Kolmašová, Ivana; Cornilleau-Wehrlin, N.; De Conchy, Y.
2014-01-01
Roč. 41, č. 8 (2014), s. 2729-2737 ISSN 0094-8276 R&D Projects: GA MŠk 7E12026; GA ČR GAP205/10/2279 Institutional support: RVO:68378289 Keywords : whistler-mode chorus * wave vector directions * Van Allen radiation belts Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 4.456, year: 2013 http://onlinelibrary.wiley.com/doi/10.1002/2014GL059815/abstract
-
International Nuclear Information System (INIS)
Carcey, J.
1975-01-01
An original hot pressing method which may be applied to ceramics, metals, and refractory powders is described. The products obtained are fine grained polycristalline materials, with homogeneous structure, very high density, unstrained and of very large dimensions (several square meters). This process equally applies to composite materials including powders, fibers, etc.. [fr
-
Vacuum hot pressing of titanium-alloy powders
International Nuclear Information System (INIS)
Malik, R.K.
1975-01-01
Full or nearly full dense products of wrought-metal properties have been obtained by vacuum hot pressing (VHP) of several prealloyed Ti--6Al--4V powders including hydride, hydride/dehydride, and rotating electrode process (REP) spherical powder. The properties of billets VHP from Ti--6Al--4V hydride powder and from hydride/dehydride powders have been shown to be equivalent. The REP spherical powder billets processed by VHP or by hot isostatic pressing (HIP) resulted in equivalent tensile properties. The potential of VHP for fabrication of near net aircraft parts such as complex fittings and engine disks offers considerable cost savings due to reduced material and machining requirements
-
Hot-pressing steatite bodies; Obtencion de eseatita por prensado en caliente
Energy Technology Data Exchange (ETDEWEB)
Aparicio Arroyo, E
1967-07-01
Requirements for some special nuclear engineering ceramic shapes are: big size, impervious, dimensional accuracy and good mechanical and dielectric properties. Limitations of te conventional methods and advantages of te hot pressing techniques for the manufacturing of these shapes are discussed. Hot pressing characteristics of a certain steatite powder are studied. Occurrence of an optimum densification temperature just above the tale decomposition range is found. Experimental data show that the height/diameter ratio of the specimen has no effect on the sintering conditions. Increasing darkness from the graphite mould is detected above the optimum temperature. The hot-pressed steatite is compared with a fired dry-pressed sample of the same composition. (Author) 13 refs.
-
Contrasting academic and lay press print coverage of the 2013-2016 Ebola Virus Disease outbreak.
Directory of Open Access Journals (Sweden)
Mark D Kieh
Full Text Available Under a traditional paradigm, only those with the expected background knowledge consume academic literature. The lay press, as well as government and non-government agencies, play a complementary role of extracting findings of high interest or importance and translating them for general viewing. The need for accurate reporting and public advising is paramount when attempting to tackle epidemic outbreaks through behavior change. Yet, public trust in media outlets is at a historic low. The Crisis and Emergency Risk Communication (CERC model for media reporting on public health emergencies was established in 2005 and has subsequently been used to analyze media reporting on outbreaks of influenza and measles as well as smoking habits and medication compliance. However, no media analysis had yet been performed on the 2013-2016 Ebola Virus Disease (EVD outbreak. This study compared the EVD information relayed by lay press sources with general review articles in the academic literature through a mixed-methods analysis. These findings suggest that comprehensive review articles could not serve as a source to clarify and contextualize the uncertainties around the EVD outbreak, perhaps due to adherence to technical accuracy at the expense of clarity within the context of outbreak conditions. This finding does not imply inferiority of the academic literature, nor does it draw direct causation between confusion in review articles and public misunderstanding. Given the erosion of the barriers siloing academia, combined with the demands of today's fast-paced media environment, contemporary researchers should realize that no study is outside the public forum and to therefore consider shifting the paradigm to take personal responsibility in the process of accurately translating their scientific words into public policy actions to best serve as a source of clarity.
-
Process design of press hardening with gradient material property influence
International Nuclear Information System (INIS)
Neugebauer, R.; Schieck, F.; Rautenstrauch, A.
2011-01-01
Press hardening is currently used in the production of automotive structures that require very high strength and controlled deformation during crash tests. Press hardening can achieve significant reductions of sheet thickness at constant strength and is therefore a promising technology for the production of lightweight and energy-efficient automobiles. The manganese-boron steel 22MnB5 have been implemented in sheet press hardening owing to their excellent hot formability, high hardenability, and good temperability even at low cooling rates. However, press-hardened components have shown poor ductility and cracking at relatively small strains. A possible solution to this problem is a selective increase of steel sheet ductility by press hardening process design in areas where the component is required to deform plastically during crash tests. To this end, process designers require information about microstructure and mechanical properties as a function of the wide spectrum of cooling rates and sequences and austenitizing treatment conditions that can be encountered in production environments. In the present work, a Continuous Cooling Transformation (CCT) diagram with corresponding material properties of sheet steel 22MnB5 was determined for a wide spectrum of cooling rates. Heating and cooling programs were conducted in a quenching dilatometer. Motivated by the importance of residual elasticity in crash test performance, this property was measured using a micro-bending test and the results were integrated into the CCT diagrams to complement the hardness testing results. This information is essential for the process design of press hardening of sheet components with gradient material properties.
-
The approach of nuclear related issues by the press
International Nuclear Information System (INIS)
Manetti, Cristiane Teixeira; Tanimoto, Katia Suemi; Hiromoto, Goro
2009-01-01
Nuclear energy has always been a polemic issue, and it is usually more intensely associated, by the general public, to the risks than to the benefits from its use; in this sense, the mass media have clearly had its share of responsibility for public opinion formation. This paper presents a report on the coverage of the nuclear issue in the press, identifying the amount of negative and positive views on the subject, as well as the people involved in the process. The analysis comprises the period from February 2007 to February 2008, right after the edition of the 4th IPCC Report. From that sample, 172 texts published in widely known newspapers and magazines, most of them from Sao Paulo State, were identified. The analyzed speeches were classified according to five information sources: specialists, users, authorities, protagonists and entrepreneurs. It was noted the predominance of positive articles, mainly due to the weight of the favorable speeches by authorities, cited as the most frequent in this paper. (author)
-
The approach of nuclear related issues by the press
Energy Technology Data Exchange (ETDEWEB)
Manetti, Cristiane Teixeira; Tanimoto, Katia Suemi; Hiromoto, Goro [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)], e-mail: cristianemanetti@hotmail.com, e-mail: katia_tanimoto@hotmail.com, e-mail: hiromoto@ipen.br
2009-07-01
Nuclear energy has always been a polemic issue, and it is usually more intensely associated, by the general public, to the risks than to the benefits from its use; in this sense, the mass media have clearly had its share of responsibility for public opinion formation. This paper presents a report on the coverage of the nuclear issue in the press, identifying the amount of negative and positive views on the subject, as well as the people involved in the process. The analysis comprises the period from February 2007 to February 2008, right after the edition of the 4th IPCC Report. From that sample, 172 texts published in widely known newspapers and magazines, most of them from Sao Paulo State, were identified. The analyzed speeches were classified according to five information sources: specialists, users, authorities, protagonists and entrepreneurs. It was noted the predominance of positive articles, mainly due to the weight of the favorable speeches by authorities, cited as the most frequent in this paper. (author)
-
International Nuclear Information System (INIS)
Kim, Choonghoe; Kim, Seongsu; Lee, Myeongkyu
2013-01-01
This report shows that flexible dye-sensitized solar cell can be fabricated by a laser-detachment and press method where the TiO 2 electrode typically sintered on glass source substrate is detached by a laser pulse and then is firmly adhered to the conductive plastic substrate by applying a high pressure. The cells fabricated by this process exhibited 36–43% smaller photocurrent and efficiency than the conventional glass cells with directly coated TiO 2 electrodes. It was attributed to the lowered dye coverage and electron diffusion length, both of which originate from the press-induced reduction of TiO 2 porosity. A maximum efficiency of 5.68% was obtained for the plastic cell. Bending of the electrode led to 20% loss of the current density and efficiency. However, no further performance degradation was observed even when the bending cycle was increased to 100, 300, and 500 times. This indicates that the bending-induced degradation of TiO 2 electrode on the plastic substrate takes place at the first bending.
-
Direction-specific recruitment of rotator cuff muscles during bench press and row.
Wattanaprakornkul, Duangjai; Halaki, Mark; Cathers, Ian; Ginn, Karen A
2011-12-01
Recent studies indicate that rotator cuff (RC) muscles are recruited in a reciprocal, direction-specific pattern during shoulder flexion and extension exercises. The main purpose of this study was to determine if similar reciprocal RC recruitment occurs during bench press (flexion-like) and row (extension-like) exercises. In addition, shoulder muscle activity was comprehensively compared between bench press and flexion; row and extension; and bench press and row exercises. Electromyographic (EMG) activity was recorded from 9 shoulder muscles sites in 15 normal volunteers. All exercises were performed at 20, 50 and 70% of subjects' maximal load. EMG data were normalized to standard maximal voluntary contractions. Infraspinatus activity was significantly higher than subscapularis during bench press, with the converse pattern during the row exercise. Significant differences in activity levels were found in pectoralis major, deltoid and trapezius between the bench press and flexion exercises and in lower trapezius between the row and extension exercises. During bench press and row exercises, the recruitment pattern in each active muscle did not vary with load. During bench press and row exercises, RC muscles contract in a reciprocal direction-specific manner in their role as shoulder joint dynamic stabilizers to counterbalance antero-posterior translation forces. Copyright © 2011 Elsevier Ltd. All rights reserved.
-
Stevens, George E.; Webster, John B.
Court cases and legal decisions involving the student press in the late 1960s and early 1970s are brought together in this book in order to show how the law has been applied to school officials and student journalists in high school, college, and the underground. The ten chapters cover the following topics: censorship, libel, obscenity, contempt,…
-
Effect of friction stirring on microstructure in equal channel angular pressed aluminum alloys
Energy Technology Data Exchange (ETDEWEB)
Sato, Y.S.; Urata, M.; Kokawa, H.; Ikeda, K. [Dept. of Materials Processing, Graduate School of Engineering, Tohoku Univ., Aoba-yama, Sendai (Japan)
2003-07-01
Friction stir welding (FSW) was applied to equal channel angular (ECA) pressed aluminum (Al) alloys with high strength and toughness, and the effect of FSW on microstructure and the hardness profile in ECA-pressed alloys was examined. In the weld of ECA-pressed Al alloy 1050 and 5083, the stir zone had roughly the same hardness as the ECA-pressed material, while the hardness was slightly reduced in the thermo-mechanically affected zone (TMAZ). The reduction of hardness in the TMAZ was due to dynamic recovery of dislocation cells of the ECA-pressed material. The addition of Zr to Al suppressed the reduction of hardness in the TMAZ. Consequently, friction stir (FS) weld of Al-Zr alloy retained the hardness of the ECA-pressed material throughout the weld. (orig.)
-
Violent Crime in Post-Civil War Guatemala: Causes and Policy Implications
2015-03-01
aspect of this collection of information. including suggestions for reducing this burden, to Washington headquarters Services, Directorate for...Intelligence Agency (CIA) to conduct covert operations. On December 9, 1953, Allen Dulles, director of the CIA, gave the approval for operation PBSUCESS—a...University Press Books, 2011), 451. 188 Ibid. 49 reparations such as state reform, financial remuneration for the indigenous people, and
-
Physiological Sociology. Endocrine Correlates of Status Behaviors,
1975-01-01
affiliative bonding. One psychiatric illness which manifests itself in social structural relationships in a profound was is sociopathic behavior. By the...very nature of the sociopathic individual, persons with the disorder display altered social behavior (Robins, 1966). The question as to whether such...Oxford: Oxford University Press, 1971. Goldman, H., Lindner, L., Dinitz, S., and Allen, H. The simple sociopath : Physiologic and sociologic
-
Kanekal, S. G.; Baker, D. N.; Henderson, M. G.; Li, W.; Fennell, J. F.; Zheng, Y.; Richardson, I. G.; Jones, A.; Ali, A. F.; Elkington, S. R.;
2015-01-01
During early November 2013, the magnetosphere experienced concurrent driving by a coronal mass ejection (CME) during an ongoing high-speed stream (HSS) event. The relativistic electron response to these two kinds of drivers, i.e., HSS and CME, is typically different, with the former often leading to a slower buildup of electrons at larger radial distances, while the latter energizing electrons rapidly with flux enhancements occurring closer to the Earth. We present a detailed analysis of the relativistic electron response including radial profiles of phase space density as observed by both Magnetic Electron and Ion Sensor (MagEIS) and Relativistic Electron Proton Telescope instruments on the Van Allen Probes mission. Data from the MagEIS instrument establish the behavior of lower energy (electrons which span both intermediary and seed populations during electron energization. Measurements characterizing the plasma waves and magnetospheric electric and magnetic fields during this period are obtained by the Electric and Magnetic Field Instrument Suite and Integrated Science instrument on board Van Allen Probes, Search Coil Magnetometer and Flux Gate Magnetometer instruments on board Time History of Events and Macroscale Interactions during Substorms, and the low-altitude Polar-orbiting Operational Environmental Satellites. These observations suggest that during this time period, both radial transport and local in situ processes are involved in the energization of electrons. The energization attributable to radial diffusion is most clearly evident for the lower energy (electrons, while the effects of in situ energization by interaction of chorus waves are prominent in the higher-energy electrons.
-
Mathematics and Humor: John Allen Paulos and the Numeracy Crusade
Directory of Open Access Journals (Sweden)
Paul H. Grawe
2015-07-01
Full Text Available John Allen Paulos at minimum gave the Numeracy movement a name through his book Innumeracy: Mathematical Illiteracy and Its Consequences. What may not be so obvious was Paulos’ strong interest in the relationship between mathematics and mathematicians on the one hand and humor and stand-up-comedian joke structures on the other. Innumeracy itself could be seen as a typically mathematical Gotcha joke on American culture generally. In this perspective, a Minnesotan acculturated to Minnesota-Nice Humor of Self-Immolation Proclivities (SImP looks at the more raw-boned, take-no-prisoners humor style Paulos outlined in Mathematics and Humor and implemented in Innumeracy. Despite the difference in humor styles, there is much to applaud in Paulos’ analysis of the relationship between certain types of humor and professional interests of mathematicians in Mathematics and Humor. Much humor relies on the sense of incongruity which Paulos’ claims to be central to all humor and key to mathematical reductio ad absurdum. Mathematics is rightfully famous for a sense of combinatorial playfulness in its most elegant proofs, as humor often relies on clashing combinations of word play. And a great range of mathematical lore is best understood within a concept of a sudden drop from one sense of certainty to another (essentially a Gotcha on the audience. Innumeracy repeatedly exemplifies Gotchas on the great unwashed and unmathematical majority. Extensive empirical evidence over the last quarter century allows us to synthesize these Paulos observations into the idea that inculcated mathematical humor has strong propensities to complex Intellectual, Advocate, and Crusader humor forms. However, the Paulos humors do not include the Sympathetic Pain humor form, the inclusion of which may increase teaching effectiveness.
-
Politicians through the press: a Spanish case study during 2008-2012
Directory of Open Access Journals (Sweden)
María Navarro Sorolla
2017-07-01
Full Text Available The press cover the politicians’ message and grant them a degree of media visibility, insinuating more or less support for any given party and giving the general public a particular vision of the political class through the media influence on politics. This paper is the result of a study of national coverage of politics (2008-2012, as published in two leading Spanish media sources (El País and El Mundo, with a particular emphasis on the Popular Party (PP and the Spanish Social Workers’ Party (PSOE. The research considers whether the media give a political use to political information through media negativity. The conclusion was that both daily newspapers use the information in a biased and negative way when dealing with Spanish political information
-
Fracking in the UK press: threat dynamics in an unfolding debate.
Jaspal, Rusi; Nerlich, Brigitte
2014-04-01
Shale gas is a novel source of fossil fuel which is extracted by induced hydraulic fracturing, or "fracking". This article examines the socio-political dimension of fracking as manifested in the UK press at three key temporal points in the debate on the practice. Three newspaper corpora were analysed qualitatively using Thematic Analysis and Social Representations Theory. Three overarching themes are discussed: "April-May 2011: from Optimism to Scepticism"; "November 2011: (De-) Constructing and Re-Constructing Risk and Danger"; "April 2012: consolidating Social Representations of Fracking". In this article, we examine the emergence of and inter-relations between competing social representations, discuss the dynamics of threat positioning and show how threat can be re-construed in order to serve particular socio-political ends in the debate on fracking.
-
Using bench press load to predict upper body exercise loads in physically active individuals.
Wong, Del P; Ngo, Kwan-Lung; Tse, Michael A; Smith, Andrew W
2013-01-01
This study investigated whether loads for assistance exercises of the upper body can be predicted from the loads of the bench press exercise. Twenty-nine physically active collegiate students (age: 22.6 ± 2.5; weight training experience: 2.9 ± 2.1 years; estimated 1RM bench press: 54.31 ± 14.60 kg; 1RM: body weight ratio: 0.80 ± 0.22; BMI: 22.7 ± 2.1 kg·m(-2)) were recruited. The 6RM loads for bench press, barbell bicep curl, overhead dumbbell triceps extension, hammer curl and dumbbell shoulder press were measured. Test-retest reliability for the 5 exercises as determined by Pearson product moment correlation coefficient was very high to nearly perfect (0.82-0.98, p bench press load was significantly correlated with the loads of the 4 assistance exercises (r ranged from 0.80 to 0.93, p bench press load was a significant (R(2) range from 0.64 to 0.86, p Bench press load (0.28) + 6.30 kg, (b) Barbell biceps curl = Bench press load (0.33) + 6.20 kg, (c) Overhead triceps extension = Bench press load (0.33) - 0.60 kg, and (d) Dumbbell shoulder press = Bench press load (0.42) + 5.84 kg. The difference between the actual load and the predicted load using the four equations ranged between 6.52% and 8.54%, such difference was not significant. Fitness professionals can use the 6RM bench press load as a time effective and accurate method to predict training loads for upper body assistance exercises. Key pointsThe bench press load was significantly correlated with the loads of the 4 assistance exercises.No significant differences were found between the actual load and the predicted load in the four equations.6RM bench press load can be a time effective and accurate method to predict training loads for upper body assistance exercises.
-
Evaluation of pressed shredded empty fruit bunch (EFB)-palm oil ...
African Journals Online (AJOL)
Pressed-shredded empty fruit bunches (EFB) and palm oil mill effluent (POME) anaerobic sludge from a 500 m3 closed anaerobic digester system was utilized for the co-composting treatment. Scanning electron microscopy (SEM) analysis showed that the shredding-pressing treatment on EFB gave better results in ...
-
Method for hot pressing beryllium oxide articles
Ballard, Ambrose H.; Godfrey, Jr., Thomas G.; Mowery, Erb H.
1988-01-01
The hot pressing of beryllium oxide powder into high density compacts with little or no density gradients is achieved by employing a homogeneous blend of beryllium oxide powder with a lithium oxide sintering agent. The lithium oxide sintering agent is uniformly dispersed throughout the beryllium oxide powder by mixing lithium hydroxide in an aqueous solution with beryllium oxide powder. The lithium hydroxide is converted in situ to lithium carbonate by contacting or flooding the beryllium oxide-lithium hydroxide blend with a stream of carbon dioxide. The lithium carbonate is converted to lithium oxide while remaining fixed to the beryllium oxide particles during the hot pressing step to assure uniform density throughout the compact.
-
Northern Illinois Univ., De Kalb. Suburban Press Research Center.
This bibliography lists journal articles concerning various aspects of the suburban press. Annotated selections, arranged alphabetically according to journal title, are gathered from the following periodicals: "Advertising Age,""Business Week,""Columbia Journalism Review,""Editor and Publisher,""Grassroots Editor,""Journalism…
-
Engineering work plan for container venting system drill press assembly troubleshooting. Revision 1
International Nuclear Information System (INIS)
Prather, M.C.
1994-11-01
This work plan is for troubleshooting the current CVS drill press to ensure that the drill bit assembly doesn't bind in the press plate. A drill press assembly has been fabricated for the Container Venting System (CVS). The drill bit assembly has bound in the press plate in previous revisions of this design. Initial troubleshooting of the drill press per Rev. 0 of this work plan was performed at the 200W Kaiser Machine Shop under Work Package 2H9401670F, Internal Work Order E20027. The drill press operated without jamming. Then, during the pre-operational test on 11/14/17 and the operational test on 11/17/94, two drum lids were drilled. Immediately after the test on 11/17/94, the drill was again operated, and it jammed. An inspection found shavings at the bottom of the drill bit assembly, between the drill bit sleeve and the press plate bore. This revised work plan provides direction for the machine shop to diagnose and correct this recent problem
-
Lassila, Joonas
2016-01-01
The aim of this Bachelor’s thesis was to develop a WordPress mobile-first style website for the customer, Pohjois-Suomen Pesis. The main purpose of the development was to learn website designing principles and create a responsive website for the mobile and desktop platforms. The development process began defining the requirements of the website and creating the requirements document. Then next step was learning how to design a website layout and to choose the colour scheme for the site. T...
-
Optimizing of SPS pressed SrFe12O19 pellets from nano-powder
DEFF Research Database (Denmark)
Mortensen, Anna; Stingaciu, Marian; Christensen, Mogens
2015-01-01
direction giving a higher net magnetization. One challenge is to optimize the pressing conditions in order to maximize the remanence and thus the energy product. In present work the SrFe12O19 powder was made in an autoclave and was analysed by X-ray diffraction and Rietveld Refinement to determine particle...... size. The powder was pressed using Spark Plasma Syntering (SPS) system at different conditions in order to investigate how the pressing conditions influence the magnetic properties. It was found, that pressing at 950oC leads to a much better alignment than pellets pressed at room temperature....... Furthermore, ball milling seems to decrease the degree of alignment and thereby the magnetic remanence which leads to a lower energy product. The magnetization was characterized using Vibrating Sample Magnetometer. By applying an external magnetic field before pressing, the alignment is heightened...
-
Reporters on the Battlefield. The Embedded Press System in Historical Context
National Research Council Canada - National Science Library
Paul, Christopher; Kim, James J
2004-01-01
While the history of relations between the press and the military predates modern journalism, much of what had gone before was neutralized by the horrible press-military breakdown that occurred during U.S...
-
Modelling and Simulation Based on Matlab/Simulink: A Press Mechanism
International Nuclear Information System (INIS)
Halicioglu, R; Dulger, L C; Bozdana, A T
2014-01-01
In this study, design and kinematic analysis of a crank-slider mechanism for a crank press is studied. The crank-slider mechanism is the commonly applied one as direct and indirect drive alternatives in practice. Since inexpensiveness, flexibility and controllability are getting more and more important in many industrial applications especially in automotive industry, a crank press with servo actuator (servo crank press) is taken as an application. Design and kinematic analysis of representative mechanism is presented with geometrical analysis for the inverse kinematic of the mechanism by using desired motion concept of slider. The mechanism is modelled in MATLAB/Simulink platform. The simulation results are presented herein
-
Modelling and Simulation Based on Matlab/Simulink: A Press Mechanism
Halicioglu, R.; Dulger, L. C.; Bozdana, A. T.
2014-03-01
In this study, design and kinematic analysis of a crank-slider mechanism for a crank press is studied. The crank-slider mechanism is the commonly applied one as direct and indirect drive alternatives in practice. Since inexpensiveness, flexibility and controllability are getting more and more important in many industrial applications especially in automotive industry, a crank press with servo actuator (servo crank press) is taken as an application. Design and kinematic analysis of representative mechanism is presented with geometrical analysis for the inverse kinematic of the mechanism by using desired motion concept of slider. The mechanism is modelled in MATLAB/Simulink platform. The simulation results are presented herein.
-
Eye-Pressing by Visually Impaired Children.
Jan, James E.; And Others
1983-01-01
The nature of eye-pressing as a visual stimulation mannerism in children with severely impaired eyesight is examined, and a possible physiological explanation (that self-stimulation occurs when the demand of the brain for meaningful visual information is not met) is offered. (CL)
-
The Law Enforcement of Journalism Profession in The Context of Press Freedom
Directory of Open Access Journals (Sweden)
Sri Ayu Astuti
2014-06-01
Full Text Available Law No. 40 of 1999 on Press is a manifestation of respect for the legal protection of press workers . Press in their role contributes to the intellectual level of the nation, through the information submitted in news publications, as well as bringing stipulated by the 1945 Constitution of Republic of Indonesia on freedom of thought and speech as Human Rights. However, in carrying out their journalistic duties, the Press should have responsibilities in the news process, and must not violate the ethics of his profession. Press that violates profession intentionally or unintentionally in the writing and publication of news in the public sphere, will still do the law enforcement process for any misuse of the meaning of freedom of speech and thought that harm others. Enforcement of this law, in line with the revocation of the right of immunity of profession issued by the Constitutional Court, which means the Press as a Professional must do the job with the precautionary principle, not by carelessness due to the trapped arrogance of jobs, and injuring other people's human rights, even doing work profession with not commendable behavior. How To Cite: Astuti, S. (2014. The Law Enforcement of Journalism Profession in The Context of Press Freedom. Rechtsidee, 1(2, 175-190. doi:http://dx.doi.org/10.21070/jihr.v1i2.97
-
Research Facility for Mechanical Press Closed Gap Adjuster
Directory of Open Access Journals (Sweden)
A. A. Ancifirov
2016-01-01
Full Text Available The article describes an example of the research facility for closed gap adjustment mechanism based on the KD2128 closed-die forging press. Its rated force with a servo drive used is 630kN. The servo drive consists of a motor with nominal power of 1.57kW and a frequency converter with power of 7.5kW, which has functions of the programmable logic controller.The article notes that such a facility is expedient and useful for practical classes on forging-andstamping machines at the BMSTU Department of «Technology processing by pressure» to demonstrate the capabilities of existing technological facility, learn a design of forging-andstamping machine units, solve the problems of automatic control, monitoring, and diagnostics in blank manufacturing.The article presents a detailed facility diagram of the closed gap adjustment mechanism and its photograph, describes the mechanism and its basic parameters, gives characteristics of the synchronous motor to drive the mechanism, reviews practical works, which the research facility may provide.Based on the four experiments the article estimates an efficiency of the research facilityuse under consideration, especially when modeling a servo motor shaft under the maximum load. The relevant diagrams confirm experimental results, namely: control current, angle of motor shaft and its speed versus time. Thus, upon the diagram analysis it can be noted that the research facility design allows providing kinematics and dynamics of the press closed gap adjuster.This article describes how to determine the closed gap adjusting accuracy of the press. Eight experiments have been conducted to evaluate a working out control signal to the linear movement of the press punch when using the research facility. It is noted that the linear positioning accuracy of the press punch reaches the hundredth parts of a millimeter of the adjustment value that is sufficient to achieve the required precision when performing operations such as
-
The Devotio Moderna and the Printing Press (ca. 1475-1540)
Goudriaan, K.
2013-01-01
Six presses owned by religious houses belonging to the Devotio Moderna were active during the period 14751540, five of them run by Brethren of the Common Life, the sixth by Regular Canons. The question is raised whether the production of these presses can be correlated with the nature of this
-
Criticism of the Press: Its Social, Psychological and Political Origins.
Becker, Lee B.; And Others
This study examines data from several national polls about press coverage during the Watergate scandal, in order to assess the origins of press criticism. The polls were conducted between 28 September and 6 October 1973, during June 1974, and in August 1974. The data suggest that political variables--particularly support of Nixon, party…
-
Design, manufacture and performance research of double acting hydraulic press
Koc, Erdem; Unver, Ertu; Ozturk, Hidayet
1990-01-01
This research presents the design and production of a double acting 40 tons capacity hydraulic press. The issues in the design, engineering manufacturing of the hydraulic press are reported specifically on both cylinders generating the same pressure and velocity using a solenoid directional control valve and a flow separating valve. (In Turkish)
-
Asynchronous decision making in a memorized paddle pressing task.
Dankert, James R; Olson, Byron; Si, Jennie
2008-12-01
This paper presents a method for asynchronous decision making using recorded neural data in a binary decision task. This is a demonstration of a technique for developing motor cortical neural prosthetics that do not rely on external cued timing information. The system presented in this paper uses support vector machines and leaky integrate-and-fire elements to predict directional paddle presses. In addition to the traditional metrics of accuracy, asynchronous systems must also optimize the time needed to make a decision. The system presented is able to predict paddle presses with a median accuracy of 88% and all decisions are made before the time of the actual paddle press. An alternative bit rate measure of performance is defined to show that the system proposed here is able to perform the task with the same efficiency as the rats.
-
Hot and cold pressing of (La,Ce)PO4-based nuclear waste forms
International Nuclear Information System (INIS)
Floran, R.J.; Rappaz, M.; Abraham, M.M.; Boatner, L.A.
1981-01-01
Synthetic analogs of the mineral monazite [(Ce,La,Ca,Th,U)(P,Si)O 4 ] are promising host phases for the isolation of actinide wastes. In the present investigation, the optimal conditions necessary to form high-density, simulated waste pellets from calcined LaPO 4 and CePO 4 powders have been examined. Pellets that are close to the theoretical density are necessary in order to minimize porosity and hence potential avenues along which fluid/waste interactions can take place. Calcined powders prepared by a urea precipitation process were cold pressed and hot pressed under a range of controlled conditions to form coherent, cylindrical pellets. Changes in density were examined as a function of pressure, temperature and duration of sintering. For cold-pressed pellets, a significant increase in density occurs during sintering between 1000 0 C and 1100 0 C. This increase is correlated with substantial grain coarsening of the pellet microstructure. A comparison of cold and hot pressing techniques suggests that, only after sintering, does the density of cold-pressed pellets approach (but not equal) that of the hot-pressed pellets. Densities >90% of the theoretical value of 5.11 g/cm 3 are easily attainable by hot pressing without sintering. The significance of density differences on pellet stability will be investigated in future leaching studies. The apparent advantages of the higher densities achieved by hot pressing must be weighed against the increased technological/engineering complexities involved when working at sustained high temperatures in a remote environment. Thus the cold pressing technique may ultimately prove more practical for large-scale commercial operations
-
Structure and characteristics of the hot pressed hydroxyapatite/poly-L-lactide composite
Directory of Open Access Journals (Sweden)
Ignjatović Nenad L.
2002-01-01
Full Text Available Hydroxyapatite/poly-L-lactide (HAp/PLL composite biomaterial can be obtained by different processing methods. Three-dimensional blocks of HAp/PLLA composite biomaterial with mechanical characteristics close to the natural bone tissue can be obtained by hot pressing procedure. Effects of synthesis and compacting on the structure and characteristics of the HAp/PLLA composite biomaterial were studied in this work. Using wade angle X-ray structural analyses (WAXS, differentially scanning calorimetry (DSC, thermogravimetric analysis (TGA and infrared (IR spectroscopy, the changes occurring in the material during synthesis and hot pressing were monitored. Surface microstructure was analyzed by scanning electronic microscopy (SEM coupled with electron-dispersion analysis (EDX. The results obtained indicate a possible decrease in the degree of crystallinity with hot pressing time increase. A block of HAp/PLLA composite biomaterial with 1.6 times lower crystallinity of the polymer phase was obtained by hot pressing in a given time interval with a maximum of 60 minutes. Results of TG analysis show that PLLA stability decreases with increasing hot pressing time, and vice versa. IR study proved that neither destructive changes in constituents nor formation of new phases occurred during hot pressing.
-
Luczak, Joshua; Bosak, Andy; Riemann, Bryan L.
2013-01-01
Previous research has compared the effects of trunk inclination angle on muscle activation using barbells and Smith machines in men. Whether similar effects occur with the use of dumbbells or in women remains unknown. The purpose was to compare upper extremity surface electromyographical (EMG) activity between dumbbell bench, incline, and shoulder presses. Dominate arm EMG data were recorded for collegiate-aged female resistance trained individuals (n = 12) and novice female resistance trained exercisers (n = 12) from which average EMG amplitude for each repetition phase (concentric, eccentric) was computed. No significant differences were found between experienced and novice resistance trained individuals. For the upper trapezius and anterior deltoid muscles, shoulder press activation was significantly greater than incline press which in turn was significantly greater than bench press across both phases. The bench and incline presses promoted significantly greater pectoralis major sternal activation compared to the shoulder press (both phases). While pectoralis major clavicular activation during the incline press eccentric phase was significantly greater than both the bench and shoulder presses, activation during the bench press concentric phase promoted significantly greater activation than the incline press which in turn was significantly greater than the shoulder press. These results provide evidence for selecting exercises in resistance and rehabilitation programs. PMID:26464884
-
Directory of Open Access Journals (Sweden)
Joshua Luczak
2013-01-01
Full Text Available Previous research has compared the effects of trunk inclination angle on muscle activation using barbells and Smith machines in men. Whether similar effects occur with the use of dumbbells or in women remains unknown. The purpose was to compare upper extremity surface electromyographical (EMG activity between dumbbell bench, incline, and shoulder presses. Dominate arm EMG data were recorded for collegiate-aged female resistance trained individuals ( and novice female resistance trained exercisers ( from which average EMG amplitude for each repetition phase (concentric, eccentric was computed. No significant differences were found between experienced and novice resistance trained individuals. For the upper trapezius and anterior deltoid muscles, shoulder press activation was significantly greater than incline press which in turn was significantly greater than bench press across both phases. The bench and incline presses promoted significantly greater pectoralis major sternal activation compared to the shoulder press (both phases. While pectoralis major clavicular activation during the incline press eccentric phase was significantly greater than both the bench and shoulder presses, activation during the bench press concentric phase promoted significantly greater activation than the incline press which in turn was significantly greater than the shoulder press. These results provide evidence for selecting exercises in resistance and rehabilitation programs.
-
A new press line concept for conveyor belts; Neues Pressenkonzept fuer Foerdergurte
Energy Technology Data Exchange (ETDEWEB)
Aumueller, Steffen [Siempelkamp Maschinen- und Anlagenbau GmbH und Co. KG, Krefeld (Germany)
2010-06-15
Pressure and temperature are the relevant process parameters for the vulcanisation of rubber products. Particularly, the vulcanisation of large-surface rubber products such as belt conveyors sets large requirements on the mechanical characteristics of the press lines. Siempelkamp Maschinen- und Anlagenbau GmbH and Co. KG (Krefeld, Federal Republic of Germany) is specialized on these requirements. For over 100 years, this company constructs vulcanisation presses for the belt conveyor industry. In the first ten decades, the layout of the press lines according to stiffness and transmission of large forces were in the focus. Till to the late 1980ies, these press lines represented the standard of the belt conveyor industry.
-
Dynamic Multiaxial Response of a Hot-Pressed Aluminum Nitride
2012-01-05
Hutchinson, Adv. Appl . Mech. 29 (1992). [34] H. Ming-Yuan, J.W. Hutchinson, Int. J. Solids Struct. 25 (1989) 1053. [35] J. Salem , L. Ghosn, Int. J...Dynamic Multiaxial Response of a Hot- Pressed Aluminum Nitride by Guangli Hu, C. Q. Chen, K. T. Ramesh, and J. W. McCauley ARL-RP-0487...Laboratory Aberdeen Proving Ground, MD 21005-5066 ARL-RP-0487 June 2014 Dynamic Multiaxial Response of a Hot- Pressed Aluminum Nitride
-
Comparison of concentric and eccentric bench press repetitions to failure.
Kelly, Stephen B; Brown, Lee E; Hooker, Steven P; Swan, Pamela D; Buman, Matthew P; Alvar, Brent A; Black, Laurie E
2015-04-01
Eccentric muscle actions (ECC) are characterized by muscle lengthening, despite actin-myosin crossbridge formation. Muscles acting eccentrically are capable of producing higher levels of force compared with muscles acting concentrically. The purpose of this study was to determine whether ECC bench press yields greater strength than concentric (CON) as determined by 1 repetition maximum (1RM). Additionally, a comparison was made examining differences in the number of repetitions to failure at different relative intensities of 1RM. Thirty healthy men (age = 24.63 ± 5.6 years) were tested for 1RM in CON and ECC bench press and the number of repetitions completed at 60, 70, 80, and 90% 1RM. For CON repetitions, the weight was mechanically lowered to the chest, and the participant pressed it up until the elbows were fully extended. The ECC bench press consisted of lowering a barbell from a fully extended elbow position to the chest in a continuous controlled manner for 3 seconds as determined by electronic metronome. Paired t-tests showed that ECC 1RM (115.99 ± 31.08 kg) was significantly (p ≤ 0.05) greater than CON 1RM (93.56 ± 26.56 kg), and the number of repetitions completed at 90% 1RM was significantly (p ≤ 0.05) greater in ECC (7.67 ± 3.24) as compared with CON (4.57 ± 2.21). There were no significant differences in number of completed repetitions during CON and ECC bench press at 60, 70, and 80% 1RM. These data indicate that ECC actions yield increased force capabilities (∼120%) as compared with CON in the bench press and may be less prone to fatigue, especially at higher intensities. These differences suggest a need to develop unique strategies for training eccentrically.
-
Zero-emission vehicle technology assessment. Final report
Energy Technology Data Exchange (ETDEWEB)
Woods, T.
1995-08-01
This is the final report in the Zero-Emission Vehicle (ZEV) Technology Assessment, performed for NYSERDA by Booz-Allen & Hamilton Inc. Booz-Allen wrote the final report, and performed the following tasks as part of the assessment: assembled a database of key ZEV organizations, their products or services, and plans; described the current state of ZEV technologies; identified barriers to widespread ZEV deployment and projected future ZEV technical capabilities; and estimated the cost of ZEVs from 1998 to 2004. Data for the ZEV Technology Assessment were obtained from several sources, including the following: existing ZEV industry publications and Booz-Allen files; major automotive original equipment manufacturers; independent electric vehicle manufacturers; battery developers and manufacturers; infrastructure and component developers and manufacturers; the U.S. Department of Energy, the California Air Resources Board, and other concerned government agencies; trade associations such as the Electric Power Research Institute and the Electric Transportation Coalition; and public and private consortia. These sources were contacted by phone, mail, or in person. Some site visits of manufacturers also were conducted. Where possible, raw data were analyzed by Booz-Allen staff and/or verified by independent sources. Performance data from standardized test cycles were used as much as possible.
-
Reducing VOC Press Emission from OSB Manufacturing
Energy Technology Data Exchange (ETDEWEB)
Dr. Gary D. McGinnis; Laura S. WIlliams; Amy E. Monte; Jagdish Rughani: Brett A. Niemi; Thomas M. Flicker
2001-12-31
Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board.
-
Freedom of the Press – two concepts
Directory of Open Access Journals (Sweden)
Markus Meckl
2015-03-01
Full Text Available In 1644 the debate for freedom of expression started in modern times thanks to John Milton’s Areopagitica, where he still argued about God in order to justify his quest for freedom. With the enlightenment God lost his unifying role for society and could no longer serve as justification. Two arguments were brought then forward to justify freedom of the press: One by the continental movement of the enlightenment; the other from within the movement of utilitarianism, and most influentially by John Stuart Mill. Both underlined the importance of truth; however, they differed in their understanding on what truth was good for. This difference in their arguments had a lasting impact on the debate on the limits of freedom of the press.
-
Solidification of glass powder by a hydrothermal hot-pressing technique
International Nuclear Information System (INIS)
Nishioka, Mamoru; Yanagisawa, Kazumichi; Yamasaki, Nakamichi
1986-01-01
A borosilicate glass powder was solidified with a NaOH solution or distilled water by the hydrothermal hot-pressing technique. The effect of hydrothermal conditions on the compressive strength was investigated, and the densification mechanism of the glass powder during the hydrothermal hot-pressing was discussed in terms of isothermal shrinkage. The glass powder was successfully solidified by hydrothermal hot-pressing at a reaction temperature lower than that of an ordinary pressure sintering. The solidified body obtained in the presence of distilled water (10 wt%) at 280 deg C had a high compressive strength of about 2300 kg/cm 2 . The analysis of initial densification process of the glass powder in hydrothermal hot-pressing with Murray's rate equation revealed that the densification proceeds both by viscous flow and by rearrangement process. Analysis of the shrinkage rates with a rate equation of hydrothermal reaction suggested that the dissolution of particles into solution controlled the initial densification of the glass powder, and that the alkaline metal acted as a catalyst. (author)
-
Use of Awamori-pressed Lees and Tofu Lees as Feed Ingredients for Growing Male Goats
Directory of Open Access Journals (Sweden)
Itsuki Nagamine
2013-09-01
Full Text Available Awamori is produced by fermenting steamed indica rice. Awamori-pressed lees is a by-product of the Awamori production process. Tofu lees is a by-product of the Tofu production process. Research was conducted to test if dried Awamori-pressed lees and Tofu lees can be used as a mixed feed ingredient for raising male goats. Eighteen male kids were divided into three groups of six animals (control feed group (CFG, Awamori-pressed lees mixed feed group (AMFG, Tofu lees mixed feed group (TMFG. The CFG used feed containing 20% soybean meal as the main protein source, while the AMFG and TMFG used feed mixed with 20% dried Awamori-pressed lees or dried Tofu lees. The groups were fed mixed feed (volume to provide 100 g/d increase in body weight and alfalfa hay cubes (2.0 kg/d twice a day (10:00, 16:00. Klein grass hay and water was given ad libitum. Hay intake was measured at 10:00 and 16:00. Body weight and size measurements were taken once a month. At the end of the experiment, a blood sample was drawn from the jugular vein of each animal and the carcass characteristics, the physical and chemical characteristics of loin were analyzed. DCP and TDN intakes in AMFG and TMFG showed no significant difference to the CFG. Cumulative measurements of growth in body weight and size over the 10 mo period in the AMFG and TMFG were similar to the CFG. Blood parameter values were similar to those in normal goats. Dressing carcass weight and percentages, and total weight of meat in the AMFG were similar to that in the CFG, but smaller in the TMFG. The compressed meat juice ratio was higher in both the TMFG and AMFG than the CFG. While the fat in corn, Awamori-pressed lees, and Tofu lees contains more than 50% linoleic acid, the loin fat in both the AMFG and TMFG was very low in linoleic acid due to the increase in the content of oleic acid, stearic acid, and palmitic acid. This indicates that feeding on AMF and TMF does not inhibit hydrogenation by ruminal
-
Yue, C.; Bortnik, J.; Thorne, R. M.; Ma, Q.; An, X.; Chappell, C. R.; Gerrard, A. J.; Lanzerotti, L. J.; Shi, Q.
2017-12-01
Understanding the source and loss processes of various plasma populations is greatly aided by having accurate knowledge of their pitch angle distributions (PADs). Here, we statistically analyze 1 eV to 600 keV hydrogen (H+) PADs near the geomagnetic equator in the inner magnetosphere based on Van Allen Probes measurements, to comprehensively investigate how the H+ PADs vary with different energies, magnetic local times (MLTs), L-shells, and geomagnetic conditions. Our survey clearly indicates four distinct populations with different PADs: (1) a pancake distribution of the plasmaspheric H+ at low L-shells except for dawn sector; (2) a bi-directional field-aligned distribution of the warm plasma cloak; (3) pancake or isotropic distributions of ring current H+; (4) radiation belt particles show pancake, butterfly and isotropic distributions depending on their energy, MLT and L-shell. Meanwhile, the pancake distribution of ring current H+ moves to lower energies as L-shell increases which is primarily caused by adiabatic transport. Furthermore, energetic H+ (> 10 keV) PADs become more isotropic following the substorm injections, indicating wave-particle interactions. The radiation belt H+ butterfly distributions are identified in a narrow energy range of 100 5), which are less significant during quiet times and extend from dusk to dawn sector through midnight during substorms. The different PADs near the equator provide clues of the underlying physical processes that produce the dynamics of these different populations.
-
2010-07-01
... Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT CONTACT WITH PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a... shall notify all news media representatives who have requested interviews or visits that have not been...
-
Proposal for Definitive Survey for Fast Radio Bursts at the Allen Telescope Array
Harp, Gerald; Tarter, J. C.; Welch, W. J.; Allen Telescope Array Team
2014-01-01
The Allen Telescope Array, a 42-dish radio interferometer in Northern California is now being upgraded with new, more sensitive receivers covering 0.9-18 GHz continuously. Leveraging this frequency coverage and wide field of view, the ATA is a unique and ideal instrument for the discovery and characterization of fast radio bursts (FRBs, discovered at Parkes and Arecibo) and other short-time domain radio phenomena. The field of view (nearly 10 sq. deg. at 1 GHz) allows for a rapid search of 3π steradians with many lookbacks over a period of 2.5 years. The instantaneous wide-frequency range of the upgraded ATA receivers allows sensitive observations at 4 simultaneous frequency ranges (for example, 0.9 - 1.5 GHz, 1.6-2.2 GHz, 2.5-3.1 GHz, and 4.6-5.2 GHz, full Stokes); something not possible at any other major telescope. This enables very accurate dispersion measure and spectral index characterization of ms-timescale bursts (or other time-variable activity) with a localization accuracy ~20" for SNR > 10 (all FRBs discovered to date would meet this criterium). We discuss the new digital processing system required to perform this survey, with a plan to capture ~400 FRB events during the survey period of performance , based on current event-rate estimates of 10^4 events/sky/day.
-
A CONCEPTUAL APPROACH ON PRESS CONFERENCE
Directory of Open Access Journals (Sweden)
Ioana Olariu
2015-07-01
Full Text Available A press conference is an important tool of public relations. The primary role of public relations is to manage a company’s reputation and help build public consent for its enterprises. The goal of PR is to develop and maintain goodwill with most, if not all, of its publics. Failure to do so may mean loss of customers and revenues, time lost dealing with complaints or lawsuits, and loss of esteem. A company’s publics change constantly. Well-executed public relations is an ongoing process that molds good long-term relationships and plays an important role in relationship marketing and integrated communications. Companies often call press conference when they have significant news to announce, such as the introduction of a new product or advertising campaign. Although used less often by organizations and corporations, this form of delivery can be very effective. The topic must be of major interest to a specific group before it is likely to gain coverage.
-
Bench press exercise: the key points.
Padulo, J; Laffaye, G; Chaouachi, A; Chamari, K
2015-06-01
The bench press exercise (BPE) is receiving increasing interest as a field testing, training/therapeutic modality to improve neuromuscular performance or to increase bone mass density. Several studies have been performed using BPE as a standard for increasing upper-limb strength. For this purpose, the position of the bar, the loads, the sets, the number of repetitions, the recovery time in-between sets, the movement speed, the muscular work and the use of the determination of the one repetition maximum (1-RM) are the classical tools investigated in the literature that have been shown to affect the BPE effect on neuromuscular. The goal of the present short review is to make a picture of the current knowledge on the bench press exercise, which could be very helpful for a better understanding of this standard movement and its effects. Based on the related literature, several recommendations on these key points are presented here.
-
Microstructural evolution of bainitic steel severely deformed by equal channel angular pressing.
Nili-Ahmadabadi, M; Haji Akbari, F; Rad, F; Karimi, Z; Iranpour, M; Poorganji, B; Furuhara, T
2010-09-01
High Si bainitic steel has been received much of interest because of combined ultra high strength, good ductility along with high wear resistance. In this study a high Si bainitic steel (Fe-0.22C-2.0Si-3.0Mn) was used with a proper microstructure which could endure severe plastic deformation. In order to study the effect of severe plastic deformation on the microstructure and properties of bainitic steel, Equal Channel Angular Pressing was performed in two passes at room temperature. Optical, SEM and TEM microscopies were used to examine the microstructure of specimens before and after Equal Channel Angular Pressing processing. X-ray diffraction was used to measure retained austenite after austempering and Equal Channel Angular Pressing processing. It can be seen that retained austenite picks had removed after Equal Channel Angular Pressing which could attributed to the transformation of austenite to martensite during severe plastic deformation. Enhancement of hardness values by number of Equal Channel Angular Pressing confirms this idea.
-
Energy Technology Data Exchange (ETDEWEB)
Hoggan, Rita E., E-mail: Rita.hoggan@inl.gov; Zuck, Larry D., E-mail: Larry.zuck@inl.gov; Cannon, W. Roger, E-mail: cannon@rutgers.edu; Lessing, Paul A., E-mail: p.a.l.2@hotmail.com
2016-12-15
A study of improved methods of processing fuel pellets was undertaken using ceria and zirconia/yttria/alumina as surrogates. Through proper granulation, elimination of fines and vertical vibration (tapping) of the parts bag prior to dry bag isostatic pressing (DBIP), reproducibility of diameter profiles among multiple pellets of ceria was improved by almost an order of magnitude. Reproducibility of sintered pellets in these studies was sufficient to allow pellets to be introduced into the cladding with a gap between the pellet and cladding on the order of 50 μm to 100 μm but not a uniform gap with tolerance of ±12 μm as is currently required. Deviation from the mean diameter along the length of multiple pellets, and deviation from roundness, decreased after sintering. This is not generally observed with dry pressed pellets. Sintered shrinkage was uniform to ±0.05% and thus, as an alternative, pellets may be machined to tolerance before sintering, thus avoiding the waste associated with post-sinter grinding. - Highlights: • Three methods of granule preparation for two different powder sources were outlined and compared using tap density curves. • A dry bag isostatic press was used to fabricate pellets and longer rods. Thus longer pellets could be fabricated by this technique. • Vertical vibrations to pack granules decreased variation in dimensions from pellet to pellet by a factor of nine. • Sintering shrinkage varied by only 0.1% along the length of a rod. Thus green machining prior to sintering could result in tight tolerances.
-
A comparison of muscle activation between a Smith machine and free weight bench press.
Schick, Evan E; Coburn, Jared W; Brown, Lee E; Judelson, Daniel A; Khamoui, Andy V; Tran, Tai T; Uribe, Brandon P
2010-03-01
The bench press exercise exists in multiple forms including the machine and free weight bench press. It is not clear though how each mode differs in its effect on muscle activation. The purpose of this study was to compare muscle activation of the anterior deltoid, medial deltoid, and pectoralis major during a Smith machine and free weight bench press at lower (70% 1 repetition maximum [1RM]) and higher (90% 1RM) intensities. Normalized electromyography amplitude values were used during the concentric phase of the bench press to compare muscle activity between a free weight and Smith machine bench press. Participants were classified as either experienced or inexperienced bench pressers. Two testing sessions were used, each of which entailed either all free weight or all Smith machine testing. In each testing session, each participant's 1RM was established followed by 2 repetitions at 70% of 1RM and 2 repetitions at 90% of 1RM. Results indicated greater activation of the medial deltoid on the free weight bench press than on the Smith machine bench press. Also, there was greater muscle activation at the 90% 1RM load than at the 70% 1RM load. The results of this study suggest that strength coaches should consider choosing the free weight bench press over the Smith machine bench press because of its potential for greater upper-body muscular development.
-
Comparison of different protein sources in enriched grain mixture for ...
African Journals Online (AJOL)
-inname voorsien. ..... Animal nutrition. Longman, New York. MERCER, lR., ALLEN, S.A. & MILLER, EL, 1980. Rumen bacterial protein synthesis and the proportion of dietary protein escaping degradation in the rumen of sheep. Br. J. NUlr.
-
Deterministic methods for the relativistic Vlasov-Maxwell equations and the Van Allen belts dynamics
International Nuclear Information System (INIS)
Le Bourdiec, S.
2007-03-01
Artificial satellites operate in an hostile radiation environment, the Van Allen radiation belts, which partly condition their reliability and their lifespan. In order to protect them, it is necessary to characterize the dynamics of the energetic electrons trapped in these radiation belts. This dynamics is essentially determined by the interactions between the energetic electrons and the existing electromagnetic waves. This work consisted in designing a numerical scheme to solve the equations modelling these interactions: the relativistic Vlasov-Maxwell system of equations. Our choice was directed towards methods of direct integration. We propose three new spectral methods for the momentum discretization: a Galerkin method and two collocation methods. All of them are based on scaled Hermite functions. The scaling factor is chosen in order to obtain the proper velocity resolution. We present in this thesis the discretization of the one-dimensional Vlasov-Poisson system and the numerical results obtained. Then we study the possible extensions of the methods to the complete relativistic problem. In order to reduce the computing time, parallelization and optimization of the algorithms were carried out. Finally, we present 1Dx-3Dv (mono-dimensional for x and three-dimensional for velocity) computations of Weibel and whistler instabilities with one or two electrons species. (author)
-
Exercises in Anatomy, Connectivity, and Morphology using Neuromorpho.org and the Allen Brain Atlas.
Chu, Philip; Peck, Joshua; Brumberg, Joshua C
2015-01-01
Laboratory instruction of neuroscience is often limited by the lack of physical resources and supplies (e.g., brains specimens, dissection kits, physiological equipment). Online databases can serve as supplements to material labs by providing professionally collected images of brain specimens and their underlying cellular populations with resolution and quality that is extremely difficult to access for strictly pedagogical purposes. We describe a method using two online databases, the Neuromorpho.org and the Allen Brain Atlas (ABA), that freely provide access to data from working brain scientists that can be modified for laboratory instruction/exercises. Neuromorpho.org is the first neuronal morphology database that provides qualitative and quantitative data from reconstructed cells analyzed in published scientific reports. The Neuromorpho.org database contains cross species and multiple neuronal phenotype datasets which allows for comparative examinations. The ABA provides modules that allow students to study the anatomy of the rodent brain, as well as observe the different cellular phenotypes that exist using histochemical labeling. Using these tools in conjunction, advanced students can ask questions about qualitative and quantitative neuronal morphology, then examine the distribution of the same cell types across the entire brain to gain a full appreciation of the magnitude of the brain's complexity.
-
Primary Beam and Dish Surface Characterization at the Allen Telescope Array by Radio Holography
Harp, G. R.; Ackermann, R. F.; Nadler, Z. J.; Blair, Samantha K.; Davis, M. M.; Wright, M. C. H.; Forster, J. R.; Deboer, D. R.; Welch, W. J.; Atkinson, Shannon; Backer, D. C.; Backus, P. R.; Barott, William; Bauermeister, Amber; Blitz, Leo; Bock, D. C.-J.; Bower, Geoffrey C.; Bradford, Tucker; Cheng, Calvin; Croft, Steve; Dexter, Matt; Dreher, John; Engargiola, Greg; Fields, E. D.; Heiles, Carl; Helfer, Tamara; Jordan, Jane; Jorgensen, Susan; Kilsdonk, Tom; Gutierrez-Kraybill, Colby; Keating, Garrett; Law, Casey; Lugten, John; MacMahon, D. H. E.; McMahon, Peter; Milgrome, Oren; Siemion, Andrew; Smolek, Ken; Thornton, Douglas; Pierson, Tom; Randall, Karen; Ross, John; Shostak, Seth; Tarter, J. C.; Urry, Lynn; Werthimer, Dan; Williams, Peter K. G.; Whysong, David
2011-06-01
The Allen Telescope Array (ATA) is a cm-wave interferometer in California, comprising 42 antenna elements with 6-m diameter dishes. We characterize the antenna optical accuracy using two-antenna interferometry and radio holography. The distortion of each telescope relative to the average is small, with RMS differences of 1% of beam peak value. Holography provides images of dish illumination, characterizing as-built mirror surfaces. Maximal distortions across ~ 2 meter lengths appear to result from mounting stresses or solar radiation. Experimental RMS errors are 0.7 mm at night and 3 mm under worst-case solar illumination. For frequencies 4, 10, and 15 GHz, the nighttime values indicate sensitivity losses of 1, 10 and 20%, respectively. ATA's wide-bandwidth receiver permits observations over a continuous range 0.5-11.2 GHz. We probe the antenna optical gain and beam pattern stability as a function of focus position and observation frequency, concluding that ATA can produce high fidelity images over a decade of simultaneous observation frequencies. We quantify solar heating effects on antenna sensitivity and pointing accuracy. We find that during the day, observations >=5 GHz will suffer some sensitivity loss and it may be necessary to make antenna pointing corrections on a 1-2 hourly basis.
-
Cold pressed versus refined winterized corn oils: quality, composition and aroma
International Nuclear Information System (INIS)
Aydeniz Güneşer, B.; Yılmaz, E.; Ok, S.
2017-01-01
The aims of this study were to characterize and compare cold pressed and fully refined winterized corn oils. Free fatty acidity (FFA), peroxide (PV) and p-anisidin (p-AV) values, saponification number, total carotenoid and phenolic contents of cold pressed corn oils were higher than that of the refined winterized corn oils. Linoleic and oleic acids (approximately 53-54% and 30-31%, respectively) were detected as the major fatty acids in both oil samples. Fifteen different sterols with a majority of β-sitosterol, campesterol, and stigmasterol were quantified in both oil samples. Although phenolic compounds were not quantified in the refined winterized oil samples, some flavonoids (hesperidin, rutin) and phenolic acids (gallic, syringic, rosmaniric and trans-ferulic) were detected in the cold pressed oil samples. This study concludes that cold pressed corn oils could be superior in terms of bioactive compounds but still need some quality improvements for sensory attributes. [es
-
2014-05-01
2001). Learning with Kernels: Support Vector Machines , Regularization, Optimization, and Beyond. The MIT Press, Cambridge, MA, 644 p. [26] Banerjee...A., Burlina, P., and Broadwater, J., (2007). A Machine Learning Approach for finding hyperspectral endmembers. Proceedings of the IEEE International... lime glass beads using hyperspectral imagery (HSI) microscopy Ronald G. Resmini1*, Robert S. Rand2, David W. Allen3, and Christopher J. Deloye1
-
Energy Technology Data Exchange (ETDEWEB)
Somunkiran, Ilyas [Firat Univ., Elazig (Turkey). Metallurgical and Materials Engineering Dept.; Balin, Ahmet [Siirt Univ. (Turkey). Dept. of Vocational High School
2016-02-01
In this study, Co-based Cr-Mo powder alloy was produced at different pressing temperatures by using hot pressing technique and abrasive wear behaviors of the produced specimens were examined. Produced specimens were exposed to abrasive wear experiment using block on disc wear test device by applying a load of 50 N with 100-mesh SiC abrasive paper. Each specimen was investigated at 25, 50, 75 and 100 m. At the end of the experiment, abrasive wear results of the specimens were determined by calculating their mass losses. Microstructural properties of the specimens which were produced at different pressing temperatures were investigated by optical and SEM examinations and their wear resistances were examined by abrasive wear experiments. Consequently, it was observed that in Co-based Cr-Mo powder alloy produced by hot pressing technique; as sintering temperature increased, size of neck formations between the powder grains increased, porosity decreased and abrasive wear resistance increased. [German] In diesem Beitrag zugrunde liegenden Studie wurde eine Co-basierte Cr-Mo-Legierung mittels Heisspressens hergestellt und der Abrasivverschleisswiderstand dieser Proben untersucht. Die hergestellten Proben wurden dem Abrasivverschleissversuch durch einen Block-Scheibe-Versuchsaufbau unterzogen, wobei eine Kraft von 50 N mit einem SiC-Papier (100 mesh) verwendet wurde. Jede Probe wurde ueber eine Distanz von 25, 50, 75 und 100 m untersucht. Am Ende der jeweiligen Experimente wurden die Abrasivverschleissergebnisse ermittelt, indem die Massenverluste berechnet wurden. Die mikrostrukturellen Eigenschaften der Proben, die bei verschiedenen Presstemperaturen hergestellt wurden, wurden mittels optischer und Rasterelektronenmikroskopie bestimmt und ihr Verschleisswiderstand anhand der Verschleissversuche ermittelt. Schliesslich wurde beobachtet, dass bei steigender Sintertemperatur der heissgespressten Co-basierten Cr-Mo-Pulverlegierung die Groesse der Einschnuerungen zwischen den
-
Buzulukova, Natalia; Goldstein, Jerry; Fok, Mei-Ching; Glocer, Alex; Valek, Phil; McComas, David; Korth, Haje; Anderson, Brian
2018-01-01
During the 14 November 2012 geomagnetic storm, the Van Allen Probes spacecraft observed a number of sharp decreases (dropouts) in particle fluxes for ions and electrons of different energies. In this paper, we investigate the global magnetosphere dynamics and magnetosphere-ionosphere (M-I) coupling during the dropout events using multipoint measurements by Van Allen Probes, TWINS, and AMPERE together with the output of the two-way coupled global BATS-R-US-CRCM model. We find different behavior for two pairs of dropouts. For one pair, the same pattern was repeated: (1) weak nightside Region 1 and 2 Birkeland currents before and during the dropout; (2) intensification of Region 2 currents after the dropout; and (3) a particle injection detected by TWINS after the dropout. The model predicted similar behavior of Birkeland currents. TWINS low-altitude emissions demonstrated high variability during these intervals, indicating high geomagnetic activity in the near-Earth tail region. For the second pair of dropouts, the structure of both Birkeland currents and ENA emissions was relatively stable. The model also showed quasi-stationary behavior of Birkeland currents and simulated ENA emissions with gradual ring current buildup. We confirm that the first pair of dropouts was caused by large-scale motions of the OCB (open-closed boundary) during substorm activity. We show the new result that this OCB motion was associated with global changes in Birkeland (M-I coupling) currents and strong modulation of low-altitude ion precipitation. The second pair of dropouts is the result of smaller OCB disturbances not related to magnetospheric substorms. The local observations of the first pair of dropouts result from a global magnetospheric reconfiguration, which is manifested by ion injections and enhanced ion precipitation detected by TWINS and changes in the structure of Birkeland currents detected by AMPERE. This study demonstrates that multipoint measurements along with the global
-
Press conference of the 15 october 2002; Conference de presse du 15 octobre 2002
Energy Technology Data Exchange (ETDEWEB)
NONE
2002-10-01
Facing the public hostile purposes of october 2002, concerning the renewable energies, Andre Antolini, President of the renewable energies syndicate, proposed a press conference to give information, data and realizations on the renewable energies. The text of the conference is presented, as data on employment, biofuels, the wind energy, the hydro-electricity the greenhouse effect fight, the public opinion, the solar heating, the photovoltaic and the future projects and electric power supply for 2010. (A.L.B.)
-
Manweiler, J. W.; Madanian, H.; Gerrard, A. J.; Patterson, J. D.; Mitchell, D. G.; Lanzerotti, L. J.
2017-12-01
On March 17, 2015, a large solar storm impacted the Earth's magnetosphere with a maximum negative Dst of -232 nT. We report on the temporal and spatial evolution of the proton energetic particle distributions in phase space during this storm, as measured by the Radiation Belt Storm Probes Ion Composition Experiment (RBSPICE) instrument on board each of the Van Allen Probes. We characterize the distribution prior to onset of the storm to provide a definition of quiet time conditions. We then show how the distribution evolves during the storm noting key changes of the distribution as a function of L and MLT and showing how the pitch angle distributions change throughout the storm. These observations displayed a number of interesting features of the storm including high beta plasma conditions and multiple injections of protons into the inner magnetosphere. We present the radial changes of the distribution at storm onset and following the evolution of the distribution during storm recovery. We compare observations of the East/West asymmetry in the proton distribution before versus after onset using both Van Allen Probes A and B spacecraft observations. Finally, we note interesting changes in the distribution showing an anomalous dropout in mid-energies of the distribution and observe an outward radial propagation of this dropout during recovery.
-
Microstructural analysis of hot press formed 22MnB5 steel
Aziz, Nuraini; Aqida, Syarifah Nur; Ismail, Izwan
2017-10-01
This paper presents a microstructural study on hot press formed 22MnB5 steel for enhanced mechanical properties. Hot press forming process consists of simultaneous forming and quenching of heated blank. The 22MnB5 steel was processed at three different parameter settings: quenching time, water temperature and water flow rate. 22MnB5 was processed using 33 full factorial design of experiment (DOE). The full factorial DOE was designed using three factors of quenching time, water temperature and water flow rate at three levels. The factors level were quenching time range of 5 - 11 s, water temperature; 5 - 27°C and water flow rate; 20 - 40 L/min. The as-received and hot press forming processed steel was characterised for metallographic study and martensitic structure area percentage using JEOL Field Emission Scanning Electron Microscopic (FESEM). From the experimental finding, the hot press formed 22MnB5 steel consisted of 50 to 84% martensitic structure area. The minimum quenching time of 8 seconds was required to obtain formed sample with high percentage of martensite. These findings contribute to initial design of processing parameters in hot press forming of 22MnB5 steel blanks for automotive component.
-
Six-axis multi-anvil press for high-pressure, high-temperature neutron diffraction experiments
Energy Technology Data Exchange (ETDEWEB)
Sano-Furukawa, A., E-mail: sano.asami@jaea.go.jp; Hattori, T. [Quantum Beam Science Center, Japan Atomic Energy Agency, Ibaraki 319-1195 (Japan); J-PARC Center, Japan Atomic Energy Agency, Ibaraki 319-1195 (Japan); Arima, H. [Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan); Yamada, A. [The University of Shiga Prefecture, Shiga 522-8533 (Japan); Tabata, S.; Kondo, M.; Nakamura, A. [Sumitomo Heavy Industries Co., Ltd., Ehime 792-0001 (Japan); Kagi, H.; Yagi, T. [Geochemical Research Center, Graduate School of Science, The University of Tokyo, Tokyo 113-0033 (Japan)
2014-11-15
We developed a six-axis multi-anvil press, ATSUHIME, for high-pressure and high-temperature in situ time-of-flight neutron powder diffraction experiments. The press has six orthogonally oriented hydraulic rams that operate individually to compress a cubic sample assembly. Experiments indicate that the press can generate pressures up to 9.3 GPa and temperatures up to 2000 K using a 6-6-type cell assembly, with available sample volume of about 50 mm{sup 3}. Using a 6-8-type cell assembly, the available conditions expand to 16 GPa and 1273 K. Because the six-axis press has no guide blocks, there is sufficient space around the sample to use the aperture for diffraction and place an incident slit, radial collimators, and a neutron imaging camera close to the sample. Combination of the six-axis press and the collimation devices realized high-quality diffraction pattern with no contamination from the heater or the sample container surrounding the sample. This press constitutes a new tool for using neutron diffraction to study the structures of crystals and liquids under high pressures and temperatures.
-
DEFF Research Database (Denmark)
Senturk, Osman Selcuk; Helle, Lars; Munk-Nielsen, Stig
2011-01-01
performance, the converter structure-based power loss and thermal models are developed in this study for the medium-voltage (MV) three-level active neutral-point-clamped voltage source converter (3L-ANPC-VSC) utilizing 4500 V-1800 A press-pack insulated-gate bipolar transistor-diode pairs and interfacing a 6...
-
Flux pinning in hot isostatically pressed Bi2Sr2CaCu2Ox
International Nuclear Information System (INIS)
Miller, D.J.; Sengupta, S.; Hettinger, J.D.; Shi, D.; Gray, K.E.; Nash, A.S.; Goretta, K.C.
1992-01-01
Magnetic hysteresis data were taken from 4.2 to 35 K on Bi 2 Sr 2 CaCu 2 O x samples that were hot isostatically pressed at 105 MPa in an inert atmosphere at 825 degree C. One set of samples was pressed for only 15 min while the other was pressed for 120 min. The samples pressed for 15 min contained a high density of dislocations and planar faults, while the samples pressed for 120 min contained fewer dislocations and faults, with most dislocations present within subgrain boundaries. The samples with the complex dislocation/planar fault structures exhibited substantially larger hysteresis loops, suggesting enhanced flux pinning
-
Directory of Open Access Journals (Sweden)
G. I. Korotova
2015-08-01
Full Text Available We present Van Allen Probe B observations of azimuthally limited, antisymmetric, poloidal Pc 4 electric and magnetic field pulsations in the pre-midnight sector of the magnetosphere from 05:40 to 06:00 UT on 1 May 2013. Oscillation periods were similar for the magnetic and electric fields and proton fluxes. The flux of energetic protons exhibited an energy-dependent response to the pulsations. Energetic proton variations were anticorrelated at medium and low energies. Although we attribute the pulsations to a drift-bounce resonance, we demonstrate that the energy-dependent response of the ion fluxes results from pulsation-associated velocities sweeping energy-dependent radial ion flux gradients back and forth past the spacecraft.
-
The influence of pressing conditions on SrFe12O19 nano-particles
DEFF Research Database (Denmark)
Mortensen, Anna; Stingaciu, Marian; Christensen, Mogens
2015-01-01
work the SrFe12O19 powder was made in an autoclave and was analysed by X-ray diffraction and Rietveld Refinement to determine particle size. The powder was pressed using Spark Plasma Syntering system at different conditions in order to investigate how the pressing conditions influence the magnetic...... properties. It was found, that pressing at 950oC leads to a much better alignment than pellets pressed at room temperature. Furthermore, ball milling seems to decrease the degree of alignment and thereby the magnetic remanence which leads to a lower energy product. The magnetization was characterized using...
-
A press database on natural risks and its application in the study of floods in Northeastern Spain
Directory of Open Access Journals (Sweden)
M. C. Llasat
2009-12-01
Full Text Available The aim of this work is to introduce a systematic press database on natural hazards and climate change in Catalonia (NE of Spain and to analyze its potential application to social-impact studies. For this reason, a review of the concepts of risk, hazard, vulnerability and social perception is also included. This database has been built for the period 1982–2007 and contains all the news related with those issues published by the oldest still-active newspaper in Catalonia. Some parameters are registered for each article and for each event, including criteria that enable us to determine the importance accorded to it by the newspaper, and a compilation of information about it. This ACCESS data base allows each article to be classified on the basis of the seven defined topics and key words, as well as summary information about the format and structuring of the new itself, the social impact of the event and data about the magnitude or intensity of the event. The coverage given to this type of news has been assessed because of its influence on construction of the social perception of natural risk and climate change, and as a potential source of information about them. The treatment accorded by the press to different risks is also considered. More than 14 000 press articles have been classified. Results show that the largest number of news items for the period 1982–2007 relates to forest fires and droughts, followed by floods and heavy rainfalls, although floods are the major risk in the region of study. Two flood events recorded in 2002 have been analyzed in order to show an example of the role of the press information as indicator of risk perception.
-
Spontaneous pneumomediastinum after bench press training.
Nishino, Tomoya
2017-04-01
Spontaneous pneumomediastinum is often associated with asthma and mainly affects adolescent males with a tall, thin body habitus. A 17-year-old man complained of chest and pharyngeal pain after bench press training and spontaneous pneumomediastinum was diagnosed. It should be considered in the differential diagnosis of chest pain of uncertain cause.
-
A comparison of PCA and PMF models for source identification of fugitive methane emissions
Assan, Sabina; Baudic, Alexia; Bsaibes, Sandy; Gros, Valerie; Ciais, Philippe; Staufer, Johannes; Robinson, Rod; Vogel, Felix
2017-04-01
Methane (CH_4) is a greenhouse gas with a global warming potential 28-32 times that of carbon dioxide (CO_2) on a 100 year period, and even greater on shorter timescales [Etminan, et al., 2016, Allen, 2014]. Thus, despite its relatively short life time and smaller emission quantities compared to CO_2, CH4 emissions contribute to approximately 20{%} of today's anthropogenic greenhouse gas warming [Kirschke et al., 2013]. Major anthropogenic sources include livestock (enteric fermentation), oil and gas production and distribution, landfills, and wastewater emissions [EPA, 2011]. Especially in densely populated areas multiple CH4 sources can be found in close vicinity. Thus, when measuring CH4 emissions at local scales it is necessary to distinguish between different CH4 source categories to effectively quantify the contribution of each sector and aid the implementation of greenhouse gas reduction strategies. To this end, source apportionment models can be used to aid the interpretation of spatial and temporal patterns in order to identify and characterise emission sources. The focus of this study is to evaluate two common linear receptor models, namely Principle Component Analysis (PCA) and Positive Matrix Factorisation (PMF) for CH4 source apportionment. The statistical models I will present combine continuous in-situ CH4 , C_2H_6, δ^1^3CH4 measured using a Cavity Ring Down Spectroscopy (CRDS) instrument [Assan et al. 2016] with volatile organic compound (VOC) observations performed using Gas Chromatography (GC) in order to explain the underlying variance of the data. The strengths and weaknesses of both models are identified for data collected in multi-source environments in the vicinity of four different types of sites; an agricultural farm with cattle, a natural gas compressor station, a wastewater treatment plant, and a pari-urban location in the Ile de France region impacted by various sources. To conclude, receptor model results to separate statistically the
-
Improving Dryer and Press Efficiencies Through Combustion of Hydrocarbon Emissions
Energy Technology Data Exchange (ETDEWEB)
Sujit Banerjee
2005-10-31
Emission control devices on dryers and presses have been legislated into the industry, and are now an integral part of the drying system. These devices consume large quantities of natural gas and electricity and down-sizing or eliminating them will provide major energy savings. The principal strategy taken here focuses on developing process changes that should minimize (and in some cases eliminate) the need for controls. A second approach is to develop lower-cost control options. It has been shown in laboratory and full-scale work that Hazardous Air Pollutants (HAPs) emerge mainly at the end of the press cycle for particleboard, and, by extension, to other prod-ucts. Hence, only the air associated with this point of the cycle need be captured and treated. A model for estimating terpene emissions in the various zones of veneer dryers has been developed. This should allow the emissions to be concentrated in some zones and minimized in others, so that some of the air could be directly released without controls. Low-cost catalysts have been developed for controlling HAPs from dryers and presses. Catalysts conventionally used for regenerative catalytic oxidizers can be used at much lower temperatures for treating press emissions. Fluidized wood ash is an especially inexpensive mate-rial for efficiently reducing formaldehyde in dryer emissions. A heat transfer model for estimating pinene emissions from hot-pressing strand for the manufacture of flakeboard has been constructed from first principles and validated. The model shows that most of the emissions originate from the 1-mm layer of wood adjoining the platen surface. Hence, a simple control option is to surface a softwood mat with a layer of hardwood prior to pressing. Fines release a disproportionate large quantity of HAPs, and it has been shown both theo-retically and in full-scale work that particles smaller than 400 ÃÂõm are principally responsible. Georgia-Pacific is considering green
-
Comparison of two polymer-based immunohistochemical detection systems: ENVISION+ and ImmPRESS.
Ramos-Vara, José A; Miller, Margaret A
2006-11-01
The non-specific background reaction produced in avidin-biotin-based immunohistochemistry, particularly after harsh antigen retrieval procedures, has promoted the use of non-avidin-biotin systems, yet there are few reports comparing the performance of non-avidin-biotin, polymer-based methods. In this study we compare two of these methods, ENVISION+trade mark and ImmPRESS, in animal tissues. We examined the immunoreactivity of 18 antigens in formalin-fixed, paraffin-embedded tissues. Antigens were located in the cytoplasmic membrane (CD11d, CD18 and CD79a), cytoplasm (calretinin, COX-1, COX-2, Glut-1, HepPar 1, KIT, Melan A, tryptase and uroplakin III) or nucleus (MUM-1, PGP 9.5 and thyroid transcription factor 1). We also evaluated three infectious agents (Aspergillus, calicivirus and West Nile virus). The staining with ENVISION+ or ImmPRESS was performed simultaneously for each antigen. The intensity of the reaction and background staining were scored. ImmPRESS yielded similar or higher reaction intensity than ENVISION+trade mark in 16/18 antigens. ImmPRESS produced abundant background with the other two antigens (calretinin and COX-2), which hindered interpretation of the specific reaction. The cost of ImmPRESS was 25% lower than for ENVISION+trade mark. Based on these results, ImmPRESS is a good polymer-based detection system for routine immunohistochemistry.
-
Natural cold pressed oils as cosmetic products
Directory of Open Access Journals (Sweden)
Małgorzata Ligęza
2016-12-01
Full Text Available Background. It seems that patients may ask general practitioners about natural cosmetics applied on the skin regarding their safety and suitability. Objectives. The aim of the study was to analyze natural cold pressed oils as potential cosmetic products. Material and methods. Cold pressed oils obtained from selected seeds and fruit stones were analyzed, including: chokeberry seed oil, blackcurrant seed oil, elderberry seed oil, raspberry seed oil, apricot seed oil, tomato seed oil, strawberry seed oil, broccoli seed oil, Nigella sativa seed oil, hemp oil, safflower seed oil, Silybum marianum seed oil and coconut oil. 80 adult volunteers assessed the cosmetic properties of the analyzed oils. Each of the volunteers tested 2 to 4 different oils, by applying them on the skin. In addition, patch tests with all analyzed oils were performed on 23 individuals. Results. The majority of tested oils were positively evaluated by the participants: in the opinion of the participants, oil extracted from safflower had the best appearance (100% positive opinions, coconut oil had the best smell (70% positive opinions, while black currant seed oil showed the best absorbency (85% positive opinions. No irritation was observed within the analyzed product group, albeit one allergic reaction to apricot seed oil was observed with patch testing. Conclusions . Based on the achieved results, it could be suggested that natural cold pressed oils can be applied to the skin as cosmetics. Our observations may be helpful for general practitioners when choosing natural cosmetics.
-
Back-pressure Forging Using a Servo Press
河本, 基一郎; Kawamoto, Kiichiro
2015-01-01
博士論文要旨Abstract 以下に掲載：International Journal of Automation Technology 9(2) pp.184-192 2015. Fuji Technology Press Ltd. 共著者：Kiichiro Kawamoto, Takeshi Yoneyama, Masato Okada
-
Trial access to Cambridge University Press ebooks
CERN Library
2011-01-01
From 1 August till 31 October, CERN users are invited to enjoy a trial access to all Cambridge University Press electronic books: http://ebooks.cambridge.org/. Please don't hesitate to send feedback to library.desk@cern.ch.
-
An Update of Freedom of the Press and Information in Latin America and the Caribbean.
Garrison, Bruce; Munoz, Julio E.
This paper is based on a review of the literature that included reports from the Inter-American Press Association's general assembly in Los Angeles in October 1984, the mid-year meeting of the Inter-American Press Association in Panama City in March 1985, and the 1983 world press freedom review of the International Press Institute. Other material…
-
Press Conference: LHC Restart, Season 2
CERN. Geneva
2015-01-01
PRESS BRIEFING ON THE LARGE HADRON COLLIDER (LHC) RE-START, SEASON 2 AT CERN, GLOBE OF SCIENCE AND INNOVATION Where : http://cern.ch/directions at the Globe of Science and Innovation When : Thursday, 12 March from 2.30 to 3.30pm - Open seating as from 2.15pm Speakers : CERN’s Director General, Rolf Heuer and Director of Accelerators, Frédérick Bordry, and representatives of the LHC experiments Webcast : https://webcast.web.cern.ch/webcast/ Dear Journalists, CERN is pleased to invite you to the above press briefing which will take place on Thursday 12 March, in the Globe of Science and Innovation, 1st floor, from 2.30 to 3.30pm. The Large Hadron Collider (LHC) is ready to start up for its second three-year run. The 27km LHC is the largest and most powerful particle accelerator in the world operating at a temperature of -217 degrees Centigrade and powered to a current of 11,000 amps. Run 2 of the LHC follows a two-year technical s...
-
Constructing Childhood: Discourses about School Violence in the Greek Daily Press
Avgitidou, Sofia; Stamou, Anastasia G.
2013-01-01
This study explores the construction of discourses about childhood in the Greek daily press. It employs the theoretical frameworks of the new sociology of childhood and critical discourse analysis to question which discourses of childhood are constructed in the daily press presenting cases where children were the victimisers in school violent…
-
A method to press powder at 6000 ton using small amount of explosive
Hilmi, Ahmad Humaizi; Azmi, Nor Azmaliana; Ismail, Ariffin
2017-12-01
Large die hydraulic press forces are one of the key instruments in making jumbo planes. The machine can produce aircraft components such as wing spars, landing gear supports and armor plates. Superpower nations such as USA, Russia, Germany, Japan, Korea and China have large die hydraulic press which can press 50,000 tons. In Malaysia, heavy-duty press is available from companies such as Proton that builds chassis for cars. However, that heavy-duty press is not able to produce better bulkhead for engines, fuselage, and wings of an aircraft. This paper presents the design of an apparatus that uses 50 grams of commercial grade explosives to produce 6000 tons of compaction. This is a first step towards producing larger scale apparatus that can produce 50,000-ton press. The design was done using AUTODYN blast simulation software. According to the results, the maximum load the apparatus can withstand was 6000 tons which was contributed by 50 grams of commercial explosive(Emulex). Explosive size larger than 50 grams will lead to catastrophic failure. Fabrication of the apparatus was completed. However, testing of the apparatus is not presented in this article.
-
PRESS: A Novel Framework of Trajectory Compression in Road Networks
Song, Renchu; Sun, Weiwei; Zheng, Baihua; Zheng, Yu
2014-01-01
Location data becomes more and more important. In this paper, we focus on the trajectory data, and propose a new framework, namely PRESS (Paralleled Road-Network-Based Trajectory Compression), to effectively compress trajectory data under road network constraints. Different from existing work, PRESS proposes a novel representation for trajectories to separate the spatial representation of a trajectory from the temporal representation, and proposes a Hybrid Spatial Compression (HSC) algorithm ...
-
ÜBERBLICK AUF DIE SCHRIFTLICHE UND ELEKTRONISCHE PRESSE IN DER TURKEI
Directory of Open Access Journals (Sweden)
Güven BÜYÜKBAYKAL
2013-01-01
Full Text Available Das Thema dieser Arbeit ist die Entwicklungen der schriftlichen Presse und der elektronischen Presse in der Türkei. Auberdem wurden die Veranderungen, die die Technologie gebracht hat, zu den Wirkungen in der schriftlichen und elektronischen Presse berührt. Der Import von teurer und verschwenderischer Technologie, die Tatsache, dass die Erhöhung der Eingabepreise den Vertriebspreisen von Zeitungen nicht entgegenkommen konnte, und der sich mit den 80'igern beschleunigende Werbe-Promotionswettbewerb erhöhten die Gestehungskosten im Pressesektor und brachten das Monopol mit sich. Die Neigung zum Monopol wirkte negativ auf die Nachrichtenproduktion, -Verteilung und die Gedankenfreiheit; die Arbeitsbedingungen und die Beschaffenheitsrechte der Pressearbeiter wurden eingeschrankt. Werbungen und unser Magazintage sind der Schwerpunkt der türkischen Presse. Exklusive - reiche Massen, Prominente, die man als 'Gesellschaftssahne' bezeichnet, Sanger und Sangerinnen die in Fernsehprogrammen berühmt wurden, und das private Leben von Entertainern haben einen groBen Platz in der Presse. Nachrichten, die die Gesellschaft oder die Zukunft des Landes interessieren, können bewusst auBer Acht gelassen werden und die Tagung besteht meistens aus Gerüchten mit vielen Bildern und groBen Buchstaben, die überhaupt keinen Nachrichtenwert haben. Letztendlich sollte man Zeitungen zum lesen und nicht zum anschauen drucken. Eine Zeitung sollte nicht mit dem Fernsehen oder dem Internet konkurrieren sondern in ihrer eigenen Rennstrecke bleiben.
-
Factors influencing the creep strength of hot pressed beryllium
International Nuclear Information System (INIS)
Webster, D.; Crooks, D.D.
1975-01-01
The parameters controlling the creep strength of hot pressed beryllium block have been determined. Creep strength was improved by a high initial dislocation density, a coarse grain size, and a low impurity content. The impurities most detrimental to creep strength were found to be aluminum, magnesium, and silicon. A uniform distribution of BeO was found to give creep strength which was inferior to a grain boundary distribution. The creep strength of very high purity, hot isostatically pressed beryllium was found to compare favorably with that of other more commonly used high temperature metals
-
Translation and Audience: Edgar Allen Poe’s “The Gold-Bug”
Directory of Open Access Journals (Sweden)
Clayton Tyler McKee
2017-10-01
Full Text Available This study intends to explore how the intended audience of a translation shapes the techniques used by the translators of the same text in order to convey the same message in a different manner. Focusing on two translations of a work done by Edgar Allen Poe, this work demonstrates how the translator shapes a translation to its audience, whether it is a pedagogical purpose or a literary one. In nineteenth century France, translations of Edgar Allan Poe began appearing in newspapers and journals catching the attention of well-known authors, such as Charles Baudelaire. While many academics, such as Wallaert and Bonnefoy, have compared Baudelaire’s translations and language choice to the original works and other translators working in the intellectual arena, the translation of “The Gold-Bug” in a young women’s magazine has not been included in the conversation. Twenty-two years before Baudelaire translates “The Gold-Bug,” originally published in English in 1843, Le magasin de desmoiselles offered a version of “Le scarabée d’or” which differed greatly in style from the version Baudelaire would provide. Comparing the two versions of the story through Schleiermacher’s theory on moving the text and Nida’s theory of equivalencies demonstrates how methods of translation fit for specific audiences in terms of a text’s foreignization and domestication. Le magasin strove to educate young bourgeoisie women à l’aristocrat while Baudelaire found inspiration in Poe’s work which would influence other movements in France. These purposes led to two translations that educate readers on foreign authors also allowing a view into how audience has influenced the translation of Poe for the French public.
-
DEFF Research Database (Denmark)
Lando, Ole
2015-01-01
Review of: Giuditta Cordero Moss, International Commercial Contracts. Cambridge: Cambridge University Press, 2014. XV + 329 pages. ISBN: 9781107684713......Review of: Giuditta Cordero Moss, International Commercial Contracts. Cambridge: Cambridge University Press, 2014. XV + 329 pages. ISBN: 9781107684713...
-
Sonwalkar, V. S.; Butler, J.; Reddy, A.
2017-12-01
We present a new method to remotely measure magnetospheric electron density and ion composition using lightning generated nonducted whistlers observed on a satellite. Electron and ion densities play important roles in magnetospheric processes such as wave-particle interactions in the equatorial region and ion-neutral dynamics in the ionosphere, and are important for calculating space weather effects such as particle precipitation, GPS scintillations, and satellite drag. The nonducted whistler resulting from a single lightning appears on a spectrogram as a series of magnetospherically reflected traces with characteristic dispersion (time delay versus frequency) and upper and lower cut off frequencies. Ray tracing simulations show that these observed characteristics depend on the magnetospheric electron density and ion composition. The cut off frequencies depend on both electron density and ion composition. The dispersion depends strongly on electron density, but weakly on ion composition. Using an iterative process to fit the measured dispersion and cutoff frequencies to those obtained from ray tracing simulations, it is possible to construct the electron and ion density profiles of the magnetosphere. We demonstrate our method by applying it to nonducted whistlers observed on OGO 1 and Van Allen probe satellites. In one instance (08 Nov 1965), whistler traces observed on OGO 1 (L = 2.4, λm = -6°) displayed a few seconds of dispersion and cutoff frequencies in the 1-10 kHz range. Ray tracing analysis showed that a diffusive equilibrium density model with the following parameters can reproduce the observed characteristics of the whistler traces: 1900 el/cc at L=2.4 and the equator, 358,000 el/cc at F2 peak (hmF2 = 220 km), the relative ion concentrations αH+ = 0.2, αHe+ = 0.2, and αO+ = 0.6 at 1000 km, and temperature 1600 K. The method developed here can be applied to whistlers observed on the past, current, and future magnetospheric satellite missions carrying
-
Free Press in a Constitutional Democracy
Lucianek, Christine
2014-01-01
This article describes a lesson in which students will examine several views expressed by the founders to understand the context for including freedom of the press in the First Amendment. Students will be asked to think about the role that the news media and the need to be an informed citizen continue to play in our democracy. Students will…
-
Highly anisotropic conductivity of tablets pressed from polyaniline-montmorillonite nanocomposite
Energy Technology Data Exchange (ETDEWEB)
Tokarský, Jonáš, E-mail: jonas.tokarsky@vsb.cz [Nanotechnology centre, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); IT4Innovations Centre of Excellence, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Kulhánková, Lenka [Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Neuwirthová, Lucie; Mamulová Kutláková, Kateřina [Nanotechnology centre, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Vallová, Silvie [Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Stýskala, Vítězslav [Faculty of Electrical Engineering and Computer Science, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Čapková, Pavla [Faculty of Science, University of J.E. Purkyně, České mládeže 8, 400 96 Ústí nad Labem (Czech Republic)
2016-03-15
Highlights: • Montmorillonite (MMT) can be intercalated with polyaniline (PANI) chains. • Tablets pressed from PANI/MMT exhibit high anisotropy in electrical conductivity. • Pressure 28MPa is sufficient to reach the anisotropy. • Tablets pressed from pure PANI also exhibit anisotropy in electrical conductivity. - Abstract: Polyaniline-montmorillonite nanocomposite was prepared from anilinium sulfate (precursor) and ammonium peroxodisulfate (oxidizing agent) using simple one-step method. The resulting nanocomposite obtained in powder form has been pressed into tablets using various compression pressures (28–400 MPa). Electrical conductivities of tablets in two perpendicular directions, i.e. direction parallel with the main surface of tablet (σ=) and in orthogonal direction (σ⊥), and corresponding anisotropy factors (i.e., the ratio σ=/σ⊥) have been studied in dependence on compression pressure used during the preparation. Polyaniline-montmorillonite nanocomposite was characterized using X-ray diffraction analysis, raman spectroscopy, transmission electron microscopy, thermogravimetric analysis and molecular modeling which led to the understanding of the internal structure. Measurement of hardness performed on pressed tablets has been also involved. Taking into account the highest value of anisotropy factor reached (σ=/σ⊥ = 490), present study shows a chance to design conductors with nearly two-dimensional conductivity.
-
Highly anisotropic conductivity of tablets pressed from polyaniline-montmorillonite nanocomposite
International Nuclear Information System (INIS)
Tokarský, Jonáš; Kulhánková, Lenka; Neuwirthová, Lucie; Mamulová Kutláková, Kateřina; Vallová, Silvie; Stýskala, Vítězslav; Čapková, Pavla
2016-01-01
Highlights: • Montmorillonite (MMT) can be intercalated with polyaniline (PANI) chains. • Tablets pressed from PANI/MMT exhibit high anisotropy in electrical conductivity. • Pressure 28MPa is sufficient to reach the anisotropy. • Tablets pressed from pure PANI also exhibit anisotropy in electrical conductivity. - Abstract: Polyaniline-montmorillonite nanocomposite was prepared from anilinium sulfate (precursor) and ammonium peroxodisulfate (oxidizing agent) using simple one-step method. The resulting nanocomposite obtained in powder form has been pressed into tablets using various compression pressures (28–400 MPa). Electrical conductivities of tablets in two perpendicular directions, i.e. direction parallel with the main surface of tablet (σ=) and in orthogonal direction (σ⊥), and corresponding anisotropy factors (i.e., the ratio σ=/σ⊥) have been studied in dependence on compression pressure used during the preparation. Polyaniline-montmorillonite nanocomposite was characterized using X-ray diffraction analysis, raman spectroscopy, transmission electron microscopy, thermogravimetric analysis and molecular modeling which led to the understanding of the internal structure. Measurement of hardness performed on pressed tablets has been also involved. Taking into account the highest value of anisotropy factor reached (σ=/σ⊥ = 490), present study shows a chance to design conductors with nearly two-dimensional conductivity.
-
Start up study of UASB reactor treating press mud for biohydrogen production
International Nuclear Information System (INIS)
Radjaram, B.; Saravanane, R.
2011-01-01
Anaerobic digestion of press mud mixed with water for biohydrogen production was performed in continuous fed UASB bioreactor for 120 days. Experiment was conducted by maintaining constant HRT of 30 h and the volume of biohydrogen evolved daily was monitored. Various parameters like COD, VFA, Alkalinity, EC, Volatile solids, pH with respect to biohydrogen production were monitored at regular interval of time. SBPR was 10.98 ml g -1 COD reduced d -1 and 12.77 ml g -1 VS reduced d -1 on peak yield of biohydrogen. COD reduction was above 70 ± 7%. Maximum gas yield was on the 78th day to 2240 ml d -1 . The aim of the experiment is to study the startup process of UASB reactor for biohydrogen production by anaerobic fermentation of press mud. The inoculum for the process is cow dung and water digested in anaerobic condition for 30 days with municipal sewage sludge. The study explores the viability of biohydrogen production from press mud which is a renewable form of energy to supplement the global energy crisis. -- Highlights: → Feasibility of biohydrogen production from press mud was explored in this study. The gas yield was maximum on the 78th day to 2240 ml d -1 with H 2 % of 52-59%. Biohydrogen yield was about 890 ml kg -1 press mud added d -1 . Press mud is identified as an excellent potential waste to tap energy.
-
Energy Technology Data Exchange (ETDEWEB)
Haakansson, Martin; Stenstroem, Stig (Lund Inst. of Technology, Lund (SE))
2007-12-15
Dewatering and drying of biofuels such as bark and GROT have received increased importance due to an increased interest to use these products as energy sources. In Sweden there are about 30 bark presses installed, however the amount of available information is very limited about dewatering of bark. The goal with this work is to increase the knowledge about dewatering of bark. Two separate goals have been defined in the project: A. Survey about problems related to dewatering of bark and compilation of operating experiences at Swedish mills. B. Study how different parameters affect bark dewatering at pilot scale experiments. Study different techniques for heating bark and the bark pressing process. The results will mainly be of interest for mills which are handling bark, for municipal power plants who buy wet forest residues (bark, GROT etc.) and for manufacturers of industrial bark pressing equipment. The results show that the dry matter content for birch- and pine bark normally are so high that pressing does not result in dewatering of the barks. Both dry and wet debarking is used and these bark fractions should be pressed separately. On line measurement of the dry matter content for the bark should be used as a standard tool on the bark press. This will facilitate improved control of the bark press during the year. Other conclusions are that smaller bark particles result in an increased dry matter content, large bark- and wood pieces decrease the dewatering in the bark press and that the total residence time in the press nip should be at least 30 seconds. The most common method to take care of bark water is to send it to the evaporators or to the water purification plant. Maintenance of the bark press appears not to be a big problem. Hot pressing can be accomplished in different ways, either the bark press can be heated or the bark can be heated in different ways. The alternatives that have been studied in this project are steaming the bark, heating the bark using
-
Low-load bench press and push-up induce similar muscle hypertrophy and strength gain.
Kikuchi, Naoki; Nakazato, Koichi
2017-06-01
To investigate the effect of push-up training with a similar load of to 40% of 1- repetition maximumal (1RM) bench press on muscle hypertrophy and strength gain in men. Eighteen male participants (age, 20.2 ± 0.73 years, range: 19-22 years, height: 169.8 ± 4.4 cm, weight: 64.5 ± 4.7 kg) were randomly assigned to one of two experimental groups: bench press at 40%1RM (bench-press group, n = 9) or push-ups with position adjusted (e.g. kneeling) to the same load of bench-press 40%1RM (push-up group, n = 9), performed twice per week for 8 weeks. Muscle thickness at three sites (biceps, triceps, and pectoralis major), bench-press 1RM, maximum repetition at 40%1RM, and power output (medicine ball throw) were measured before and after the training period. Significant increases in 1RM and muscle thickness (triceps and pectoralis major) were observed in bench-press group (1RM, from 60.0 ± 12.1 kg to 65.0 ± 12.1 kg, p bench-press group (28.4 ± 3.3 mm to 31.5 ± 3.7 mm, p bench press is comparably effective for muscle hypertrophy and strength gain over an 8-week training period.
-
5. Bibliographie de D. N. McCloskey1
2014-01-01
Ouvrages individuels Histoire économique Economic Maturity and Entrepreneurial Decline : British Iron and Steel, 1870-1913, Boston, Harvard University Press (Harvard Economic Studies), 1973. (David A. Wells Prize.) Enterprise and Trade in Victorian Britain : Essays in Historical Economics, Londres / Boston, Allen and Unwin, 1981 (2e édition, 1993). Econometric History, British Economic History Society, Houndmills, Basingstoke, Hampshire, Macmillan, 1987. Critique économique et historique The ...
-
A Comparison of Coverage of Speech and Press Verdicts of Supreme Court.
Hale, F. Dennis
1979-01-01
An analysis of the coverage by ten newspapers of 20 United States Supreme Court decisions concerning freedom of the press and 20 decisions concerning freedom of speech revealed that the newspapers gave significantly greater coverage to the press decisions. (GT)
-
[A man with a painful upper arm after bench press exercise].
Sijtsma, Ben C T; van der Veen, Hugo C; van Raay, Jos J A M
2015-01-01
A 22-year-old male bodybuilder presented with pain and a haematoma of his right upper arm after bench press exercises. Suspicion of a pectoralis muscle tear was confirmed by MRI and surgical repair was performed. Ruptures of the pectoralis major muscle are rare, but may occur in young male bodybuilders, typically after bench press exercises.
-
International Nuclear Information System (INIS)
1980-01-01
Results of a reconnaissance geochemical survey of the Brownsville-McAllen Quadrangles, Texas are reported. Field and laboratory data are presented for 427 groundwater and 171 stream sediment samples. Statistical and areal distributions of uranium and possible uranium-related variables are displayed. Pertinent geologic factors which may be of significance in evaluating the potential for uranium mineralization are briefly discussed. Groundwater data indicate the most promising area for potential uranium mineralization occurs in the northwestern section of the quadrangles (Jim Hogg, Starr, and Zapata Counties), where waters are derived from the Catahoula Formation. These groundwaters have high concentrations of uranium, uranium associated elements, and low values for specific conductance. Another area with high uranium concentrations is in the southeastern portion of the survey area (Hidalgo, Cameron, and Willacy Counties). Shallow wells <10 m (30 ft) are numerous in this area and high specific conductance values may indicate contamination from extensive fertilization. Stream sediment data for the survey does not indicate an area favorable for uranium mineralization. Anomalous acid soluble uranium values in the southeastern area (Hidalgo, Cameron, and Willacy Counties) can be attributed to phosphate fertilizer contamination. Four samples in the western part of the area (western Starr County) have anomalously high total uranium values and low acid soluble uranium values, indicating the uranium may be contained in resistate minerals
-
Modeling the Proton Radiation Belt With Van Allen Probes Relativistic Electron-Proton Telescope Data
Selesnick, R. S.; Baker, D. N.; Kanekal, S. G.; Hoxie, V. C.; Li, X.
2018-01-01
An empirical model of the proton radiation belt is constructed from data taken during 2013-2017 by the Relativistic Electron-Proton Telescopes on the Van Allen Probes satellites. The model intensity is a function of time, kinetic energy in the range 18-600 MeV, equatorial pitch angle, and L shell of proton guiding centers. Data are selected, on the basis of energy deposits in each of the nine silicon detectors, to reduce background caused by hard proton energy spectra at low L. Instrument response functions are computed by Monte Carlo integration, using simulated proton paths through a simplified structural model, to account for energy loss in shielding material for protons outside the nominal field of view. Overlap of energy channels, their wide angular response, and changing satellite orientation require the model dependencies on all three independent variables be determined simultaneously. This is done by least squares minimization with a customized steepest descent algorithm. Model uncertainty accounts for statistical data error and systematic error in the simulated instrument response. A proton energy spectrum is also computed from data taken during the 8 January 2014 solar event, to illustrate methods for the simpler case of an isotropic and homogeneous model distribution. Radiation belt and solar proton results are compared to intensities computed with a simplified, on-axis response that can provide a good approximation under limited circumstances.
-
Fracking in the Polish press: Geopolitics and national identity
International Nuclear Information System (INIS)
Jaspal, Rusi; Nerlich, Brigitte; Lemańcyzk, Szczepan
2014-01-01
In a context of resource scarcity and political instability, new energy sources and technologies are being explored in many parts of the world and exploited in some. One of these new energy sources is shale gas and one of the countries seeking to decrease its energy dependence and increase its energy security is Poland which is largely dependent on gas and oil imports from Russia. This article presents the results of a thematic content analysis of articles reporting on shale gas/fracking published in Gazeta Wyborcza and Rzeczpospolita, two leading Polish newspapers, from 1 January 2010 to 31 December 2012. Findings suggest that in media reporting the geopolitical dimension of fracking overrides the technological/scientific dimension and that representations are overwhelmingly positive. Positive representations are bolstered through particular linguistic framings. It is argued that the Polish press has polarized the debate on fracking in a particular (positive) direction, which has silenced an open and constructive debate concerning energy policy in Poland and constructed criticism of fracking as counter-normative and “un-Polish.” The potential socio-political and policy implications of these media representations are discussed. - Highlights: • The general tone of Polish media reporting is positive and emphatic about the benefits of fracking. • The geopolitical dimension of fracking overrides the technological/scientific dimension. • The implementation of fracking is constructed as a national priority. • Opposition to fracking is constructed as counter-normative and “anti-Polish”. • Representations impede open and constructive dialogue about energy policy
-
International Nuclear Information System (INIS)
Brodhag, C.; Thevenot, F.
1988-01-01
An experimental technique is described to study hot pressing of ceramics under conditions of controlled temperature and pressure during both the heating and final sintering stages. This method gives a better control of the final microstructure of the material. Transformation mechanisms can be studied during initial heating stage (impurity degasing, reaction, phase transformation, mechanical behavior of intergranular phase...) using computer control and graphical data representations. Some examples will be given for different systems studied in our laboratory: B (α, β, amorphous), B 12 O 2 (reaction of B + B 2 O 3 ), Si 3 N 4 ( + additives), TiN, Al 2 O 3 + AlON,ZrC
-
Press kit kicks off new branding.
Rees, Tom
2004-01-01
A smartly produced press kit resulted in unprecedented news coverage when Denver's Porter Adventist Hospital recently unveiled plans for an extensive 80 million dollars redevelopment. A news conference was held to announce this plan, along with the opening of the hospital's new emergency department. The overall effort is part of the new branding strategy of the 75-year-old hospital.
-
Citizen Journalism in Cyber Media: Protection and Legal Responsibility Under Indonesian Press Law
Prahassacitta, Vidya
2017-01-01
Phenomena of citizen journalism had accepted and become part of cyber media. Cyber media owned and managed by press companies had featured citizen journalists’ information, critics, opinions, and news. Citizen journalism was part of freedom of expression. However, in Indonesia’s press law concept, it was not part of the national press. This created legal issues regarding protection and legal responsibility aspects for both parties. A qualitative research was conducting to solving these issues...
-
A Journalist's Guide to the Free Press.
Ingelhart, Louis
1996-01-01
Summarizes the content of the federal constitution and various state constitutions regarding freedom of the press. Examines certain borderline issues, including actions and expressions, pornography, defamation, libel, and copyrighted material. States that regulation of unprotected material must be reasonable, specific, and clear. Discusses what…
-
A comparison of muscle activity in concentric and counter movement maximum bench press.
van den Tillaar, Roland; Ettema, Gertjan
2013-01-01
The purpose of this study was to compare the kinematics and muscle activation patterns of regular free-weight bench press (counter movement) with pure concentric lifts in the ascending phase of a successful one repetition maximum (1-RM) attempt in the bench press. Our aim was to evaluate if diminishing potentiation could be the cause of the sticking region. Since diminishing potentiation cannot occur in pure concentric lifts, the occurrence of a sticking region in this type of muscle actions would support the hypothesis that the sticking region is due to a poor mechanical position. Eleven male participants (age 21.9 ± 1.7 yrs, body mass 80.7 ± 10.9 kg, body height 1.79 ± 0.07 m) conducted 1-RM lifts in counter movement and in pure concentric bench presses in which kinematics and EMG activity were measured. In both conditions, a sticking region occurred. However, the start of the sticking region was different between the two bench presses. In addition, in four of six muscles, the muscle activity was higher in the counter movement bench press compared to the concentric one. Considering the findings of the muscle activity of six muscles during the maximal lifts it was concluded that the diminishing effect of force potentiation, which occurs in the counter movement bench press, in combination with a delayed muscle activation unlikely explains the existence of the sticking region in a 1-RM bench press. Most likely, the sticking region is the result of a poor mechanical force position.
-
Citizen Journalism in Cyber Media: Protection and Legal Responsibility Under Indonesian Press Law
Directory of Open Access Journals (Sweden)
Vidya Prahassacitta
2017-01-01
Full Text Available Phenomena of citizen journalism had accepted and become part of cyber media. Cyber media owned and managed by press companies had featured citizen journalists’ information, critics, opinions, and news. Citizen journalism was part of freedom of expression. However, in Indonesia’s press law concept, it was not part of the national press. This created legal issues regarding protection and legal responsibility aspects for both parties. A qualitative research was conducting to solving these issues. Using secondary data from literature study and observation on several cyber media websites, this discovers two conclusions. First, the citizen journalist is part of freedom of the press; it means that a citizen journalist’s creation has protected form censor and bans. However, a citizen journalist still has a limitation which shall be complied videlicet Civil Code and Law No. 11 The year 2008 concerning Information and Electronic Transaction. Violation of both regulations means that a citizen journalist shall be legally responsible. Second, protection and responsibility border between a citizen journalist and press company are based on an agreement. Approval of term and condition of general user content in a website from a citizen journalist means that both parties have agreed to enter into an agreement. A press company might be freed of its legal responsibility as long as conducted its obligation to control and manage contents that have been uploaded and published by a citizen journalist. If the company does not take proportional action against citizen journalist’ contents that violating the law, the press company shall be requested its civil or criminal legal responsibility.
-
Schwartz, Lisa M; Woloshin, Steven; Andrews, Alice; Stukel, Therese A
2012-01-27
To determine whether the quality of press releases issued by medical journals can influence the quality of associated newspaper stories. Retrospective cohort study of medical journal press releases and associated news stories. We reviewed consecutive issues (going backwards from January 2009) of five major medical journals (Annals of Internal Medicine, BMJ, Journal of the National Cancer Institute, JAMA, and New England Journal of Medicine) to identify the first 100 original research articles with quantifiable outcomes and that had generated any newspaper coverage (unique stories ≥100 words long). We identified 759 associated newspaper stories using Lexis Nexis and Factiva searches, and 68 journal press releases using Eurekalert and journal website searches. Two independent research assistants assessed the quality of journal articles, press releases, and a stratified random sample of associated newspaper stories (n=343) by using a structured coding scheme for the presence of specific quality measures: basic study facts, quantification of the main result, harms, and limitations. Proportion of newspaper stories with specific quality measures (adjusted for whether the quality measure was present in the journal article's abstract or editor note). We recorded a median of three newspaper stories per journal article (range 1-72). Of 343 stories analysed, 71% reported on articles for which medical journals had issued press releases. 9% of stories quantified the main result with absolute risks when this information was not in the press release, 53% did so when it was in the press release (relative risk 6.0, 95% confidence interval 2.3 to 15.4), and 20% when no press release was issued (2.2, 0.83 to 6.1). 133 (39%) stories reported on research describing beneficial interventions. 24% mentioned harms (or specifically declared no harms) when harms were not mentioned in the press release, 68% when mentioned in the press release (2.8, 1.1 to 7.4), and 36% when no press release
-
Reducing VOC Press Emission from OSB Manufacturing; FINAL
International Nuclear Information System (INIS)
Gary D, McGinnis; Laura S, WIlliams; Amy E, Monte; Jagdish Rughani; Brett A, Niemi; Thomas M, Flicker
2001-01-01
Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board
-
Reflexo dos barorreceptores e homeostase da pressão arterial
Directory of Open Access Journals (Sweden)
Anderson Martelli
2013-12-01
Full Text Available A hipertensão arterial é considerada um dos principais fatores de risco para a morbidade e mortalidade cardiovascular. Os reflexos originados nos barorreceptores arteriais e nos receptores de estiramento da região cardiopulmonar são os principais mecanismos de controle efetivo da pressão arterial a curto prazo. O reflexo dos barorreceptores é considerado um sistema de controle de alto ganho, que mantém a pressão arterial dentro de limites normais em períodos de segundos a minutos. Dessa forma, esta revisão busca abordar os mecanismos desenvolvidos pelos barorreceptores na homeostase da pressão arterial. No presente artigo foram relatadas as alterações dos reflexos cardiovasculares na hipertensão arterial, focando a distribuição dos barorreceptores e seu funcionamento no restabelecimento da pressão arterial. Para realização desta pesquisa foi realizada uma revisão de artigos científicos utilizando as bases de dados Medline, Scielo e Lilacs. Adicionalmente foram consultados livros de fisiologia humana para complementação das informações sobre a fisiologia do barorreflexo na homeostase da pressão arterial. Estudos clínicos têm mostrado que uma reduzida sensibilidade do barorreflexo está associada com a morte súbita que se segue ao infarto agudo do miocárdio. O entendimento dos reflexos dos barorreceptores e a manutenção da hipertensão arterial em curto prazo são de grande importância para o entendimento da fisiopatogenia envolvidas no desenvolvimento e/ou evolução de determinadas alterações patológicas.
-
Ranak, M S A Noman; Azad, Saiful; Nor, Nur Nadiah Hanim Binti Mohd; Zamli, Kamal Z
2017-01-01
Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT)-a.k.a., Force Touch in Apple's MacBook, Apple Watch, ZTE's Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on-is transformed into a new type of code, named Press Touch Code (PTC). We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme.
-
Ranak, M. S. A. Noman; Nor, Nur Nadiah Hanim Binti Mohd; Zamli, Kamal Z.
2017-01-01
Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT)—a.k.a., Force Touch in Apple’s MacBook, Apple Watch, ZTE’s Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on—is transformed into a new type of code, named Press Touch Code (PTC). We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme. PMID:29084262
-
International Nuclear Information System (INIS)
Telle, R.
1988-01-01
The poor sinterability of B 4 C limits its widespread application because both high temperatures and high pressures are required for a complete densification. Moreover, B 4 C suffers from a low strength and fracture toughness, possesses, however, a high potential because of its extreme hardness. Reaction hot pressing of B 4 C-WC-TiC-Si-Co mixtures resulting in B 4 C-TiB 2 -W 2 B 5 composites of high density exhibit remarkable mechanical properties. The influence of hot isostatic pressing (HIP) on the microstructure and the mechanical properties is investigated in cooperation with participants of the COST 503 activities and related to the strengthening and toughening mechanisms. Difficulties during densification by HIP arise from the evaporation of adsorbed volatiles as well as from the strong swelling of the powder compact due to the sintering reaction. Several HIP cycle designs were tested in order to prevent the bloating of the capsule and to control internal stresses due to the misfit of the thermal expansion of the entire phases. In comparison to single phase B 4 C ceramics, bending strength was improved to 1030 MPa, K Ic to 5.2 MPa/m, while hardness was comparable with HV1=38 GPa. Wear test were performed and related to the toughening mechanisms. (orig.) With 56 refs., 9 tabs., 64 figs
-
Directory of Open Access Journals (Sweden)
M S A Noman Ranak
Full Text Available Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT-a.k.a., Force Touch in Apple's MacBook, Apple Watch, ZTE's Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on-is transformed into a new type of code, named Press Touch Code (PTC. We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme.
-
Hydrogen Decrepitation Press-Less Process Recycling of NdFeB sintered magnets
DEFF Research Database (Denmark)
Xia, Manlong; Abrahamsen, Asger Bech; Bahl, Christian
2017-01-01
A Hydrogen Decrepitation Press-Less Process (HD-PLP) recycling method for recycling of anisotropic NdFeB magnets is demonstrated. The method combines hydrogen decrepitation (HD) disintegration of the initial magnet, powder sieving and the Press-Less Process (PLP), where hydride powder is sintered...
-
Energy Technology Data Exchange (ETDEWEB)
Gozzard, E., E-mail: emgo@ceh.ac.uk [Hydrogeochemical Engineering Research and Outreach Group, School of Civil Engineering and Geosciences, Newcastle University, Newcastle upon Tyne NE1 7RU (United Kingdom); Mayes, W.M., E-mail: W.Mayes@hull.ac.uk [Hydrogeochemical Engineering Research and Outreach Group, School of Civil Engineering and Geosciences, Newcastle University, Newcastle upon Tyne NE1 7RU (United Kingdom); Potter, H.A.B., E-mail: hugh.potter@environment-agency.gov.uk [Environment Agency England and Wales, c/o Institute for Research on Environment and Sustainability, Newcastle University, Newcastle upon Tyne NE1 7RU (United Kingdom); Jarvis, A.P., E-mail: a.p.jarvis@ncl.ac.uk [Hydrogeochemical Engineering Research and Outreach Group, School of Civil Engineering and Geosciences, Newcastle University, Newcastle upon Tyne NE1 7RU (United Kingdom)
2011-10-15
Quantifying diffuse sources of pollution is becoming increasingly important when characterising river catchments in entirety - a prerequisite for environmental management. This study examines both low and high flow events, as well as spatial variability, in order to assess point and diffuse components of zinc pollution within the River West Allen catchment, which lies within the northern England lead-zinc Orefield. Zinc levels in the river are elevated under all flow regimes, and are of environmental concern. Diffuse components are of little importance at low flow, with point source mine water discharges dominating instream zinc concentration and load. During higher river flows 90% of the instream zinc load is attributed to diffuse sources, where inputs from resuspension of metal-rich sediments, and groundwater influx are likely to be more dominant. Remediating point mine water discharges should significantly improve water quality at lower flows, but contribution from diffuse sources will continue to elevate zinc flux at higher flows. - Highlights: > Zinc concentrations breach EU quality thresholds under all river flow conditions. > Contributions from point sources dominate instream zinc dynamics in low flow. > Contributions from diffuse sources dominate instream zinc dynamics in high flow. > Important diffuse sources include river-bed sediment resuspension and groundwater influx. > Diffuse sources would still create significant instream pollution, even with point source treatment. - Diffuse zinc sources are an important source of instream contamination to mine-impacted rivers under varying flow conditions.
-
Guardians of the public sphere? Political scandal and the press, 1979-97.
See, Helena
2013-01-01
The political scandals that beset the Conservative Party during the 1980s and 1990s constitute a valuable lens for examining two interrelated areas of study: the changing power relationship between government and press, and the changing interface between public and private in contemporary discourse. Close discursive analysis of the press coverage of these scandals--and of the libel actions that resulted from them--highlights the extent to which the Thatcher administration and the tabloid press propagated a shared moral discourse, founded on the repudiation of 'permissiveness', and a return to the ideal of the patriarchal nuclear family. This alliance transformed the way in which the Conservative message was communicated, disseminated, and indeed constituted, yet ultimately proved to be a double-edged sword. By catalysing the disintegration of the boundary between public and private in political life, and investing the press with the power to mould and configure public expectations of sexual morality, Thatcher laid the groundwork for the eventual fall of the Major administration, in the wake of a long series of financial and sexual scandals. As such, this article offers insights into a hitherto unexamined aspect of Thatcher's legacy, and the unprecedented influence of the press in late twentieth-century politics.
-
Rogers, Benjamin H; Brown, Justin C; Gater, David R; Schmitz, Kathryn H
2017-02-01
To characterize the relationship between 1-repetition maximum (1-RM) bench press strength and isometric handgrip strength among breast cancer survivors. Cross-sectional study. Laboratory. Community-dwelling breast cancer survivors (N=295). Not applicable. 1-RM bench press strength was measured with a barbell and exercise bench. Isometric handgrip strength was measured using an isometric dynamometer, with 3 maximal contractions of the left and right hands. All measures were conducted by staff with training in clinical exercise testing. Among 295 breast cancer survivors, 1-RM bench press strength was 18.2±6.1kg (range, 2.2-43.0kg), and isometric handgrip strength was 23.5±5.8kg (range, 9.0-43.0kg). The strongest correlate of 1-RM bench press strength was the average isometric handgrip strength of both hands (r=.399; Pisometric handgrip strength of both hands overestimated 1-RM bench press strength by 4.7kg (95% limits of agreement, -8.2 to 17.6kg). In a multivariable linear regression model, the average isometric handgrip strength of both hands (β=.31; Pstrength (R 2 =.23). Isometric handgrip strength is a poor surrogate for 1-RM bench press strength among breast cancer survivors. 1-RM bench press strength and isometric handgrip strength quantify distinct components of muscular strength. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.
-
Speech freedom and press freedom in human security in Rwanda
Niyonzima, Oswald
2014-01-01
Treball Final de Màster Universitari Internacional en Estudis de Pau, Conflictes i Desenvolupament. Codi: SAA074. Curs: 2013/2014 Freedom of speech and press freedom are key foundations of all human rights as stipulated in human rights declaration of 1948. Denying people the right to free speech is keeping them away from what is happening in this world, thus, hindering them from participating in decision making. While speech freedom and press freedom are key tools to measure if a country ...
-
Directory of Open Access Journals (Sweden)
Christopher James Clark
Full Text Available Models of character evolution often assume a single mode of evolutionary change, such as continuous, or discrete. Here I provide an example in which a character exhibits both types of change. Hummingbirds in the genus Selasphorus produce sound with fluttering tail-feathers during courtship. The ancestral character state within Selasphorus is production of sound with an inner tail-feather, R2, in which the sound usually evolves gradually. Calliope and Allen's Hummingbirds have evolved autapomorphic acoustic mechanisms that involve feather-feather interactions. I develop a source-filter model of these interactions. The 'source' comprises feather(s that are both necessary and sufficient for sound production, and are aerodynamically coupled to neighboring feathers, which act as filters. Filters are unnecessary or insufficient for sound production, but may evolve to become sources. Allen's Hummingbird has evolved to produce sound with two sources, one with feather R3, another frequency-modulated sound with R4, and their interaction frequencies. Allen's R2 retains the ancestral character state, a ∼1 kHz "ghost" fundamental frequency masked by R3, which is revealed when R3 is experimentally removed. In the ancestor to Allen's Hummingbird, the dominant frequency has 'hopped' to the second harmonic without passing through intermediate frequencies. This demonstrates that although the fundamental frequency of a communication sound may usually evolve gradually, occasional jumps from one character state to another can occur in a discrete fashion. Accordingly, mapping acoustic characters on a phylogeny may produce misleading results if the physical mechanism of production is not known.
-
FRAMEWORKING THE PRESS FREEDOM, AT THE BORDER BETWEEN LEGAL AND SELF-REGULATION
Directory of Open Access Journals (Sweden)
Cristina Anca PĂIUȘESCU
2014-05-01
Full Text Available Freedom of the press is essential to democracy and to a pluralistic culture. Most journalists are against any form of legal regulation considering the creation of a press law as an interference with freedom of the press, while state authorities considered necessary minimum set of rules to sanction those who exceed the "normality" of free speech. If in the audiovisual field the legislation tends toward European standards, for print media all draft laws proposed so far by different political parties or the government have failed. Representatives of the major newspapers saw each time in these legislative proposals an attempt to "choke" the freedom of the press. In this context, self-regulation is seen as a way in which journalists can establish their own rules in order to protect themselves from the state attempt to regulate this area, a method of protecting against political manipulation and preventing the erosion of public trust, and it is also seen as a method of education within the profession.
-
Strength, body composition, and functional outcomes in the squat versus leg press exercises.
Rossi, Fabrício E; Schoenfeld, Brad J; Ocetnik, Skyler; Young, Jonathan; Vigotsky, Andrew; Contreras, Bret; Krieger, James W; Miller, Michael G; Cholewa, Jason
2018-03-01
The purpose of this study was to compare strength, body composition, and functional outcome measures following performance of the back squat, leg press, or a combination of the two exercises. Subjects were pair-matched based on initial strength levels and then randomly assigned to 1 of 3 groups: a squat-only group (SQ) that solely performed squats for the lower body; a leg press-only group (LP) that solely performed leg presses for the lower body, or a combined squat and leg press group (SQ-LP) that performed both squats and leg presses for the lower body. All other RT variables were held constant. The study period lasted 10 weeks with subjects performing 2 lower body workouts per week comprising 6 sets per session at loads corresponding to 8-12 RM with 90- to 120-second rest intervals. Results showed that SQ had greater transfer to maximal squat strength compared to the leg press. Effect sizes favored SQ and SQ-LP versus LP with respect to countermovement jump while greater effect sizes for dynamic balance were noted for SQ-LP and LP compared to SQ, although no statistical differences were noted between conditions. These findings suggest that both free weights and machines can improve functional outcomes, and that the extent of transfer may be specific to the given task.
-
Effect of Fatigue Upon Performance and Electromyographic Activity in 6-RM Bench Press.
van den Tillaar, Roland; Saeterbakken, Atle
2014-03-27
The aim of this study was to examine the effect of fatigue during one set of 6-RM bench pressing upon the muscle patterning and performance. Fourteen resistance-trained males (age 22.5±2.0 years, stature 1.82±0.07 m, body mass 82.0±7.8 kg) conducted a 6-RM bench press protocol. Barbell kinematics and EMG activity of pectoralis major, deltoid anterior, biceps brachii, triceps brachii, rectus abdominis, oblique external and erector spinae were measured in each repetition during the 6-RM bench press. Total lifting time increased and the velocity in the ascending movement decreased (p≤0.001). However, the kinematics in the descending phase deferred: the time decreased and velocity increased during the 6-RM (p≤0.001). Generally, muscles increased their EMG amplitude during the six repetitions in the ascending movement, while only three of the seven measured muscles showed an increase over the six repetitions in the descending part in 6-RM bench pressing. It was concluded that the bench pressing performance decreased (lower barbell velocities and longer lifting times) with increasing fatigue in the 6-RM execution. Furthermore EMG increased in the prime movers and the trunk stabilizers (abdominal and spine), while the antagonist muscle (biceps) activity was not affected by fatigue during the lifting phase in a single set of 6-RM bench pressing.
-
Chemical Composition of Iran's Pistacia atlantica Cold-Pressed Oil
Directory of Open Access Journals (Sweden)
M. Saber-Tehrani
2013-01-01
Full Text Available The lipid fraction of Pistacia atlantica seeds was extracted for the first time by means of cold-press technique and analyzed for its chemical composition. The fatty acids, sterols, triacylglycerols (TAG, tocopherols, polyphenols, and pigments were identified and their concentrations were determined by means of reversed-phase high-performance liquid chromatography (RP-HPLC and gas chromatography (GC. Because of its high content of unsaturated fatty acids, it might prove to be of value in diets and it may be used as edible cooking or salad oils or for margarine manufacture. Pistacia atlantica seed oil has the unique sterols and tocopherols content providing source of natural antioxidants. The main triacylglycerols were SLL + PLO, SOL + POO, OOLn + PLL, OOO, and SOO. This paper examined the phenolic fraction of Pistacia atlantica seed oil. Moreover, caffeic acid followed by cinnamic acid, pinoresinol, vanillin, p-Coumaric acid, ferulic acid, and o-Coumaric acid was also determined. This paper presents the first investigation of chlorophyll's and carotene's composition in Pistacia atlantica seed oil. Furthermore, pheophytin a was the major component, followed by luteoxanthin, neoxanthin, violaxanthin, lutein, lutein isomers, chlorophyll a, chlorophyll a′, and pheophytin a′ were also determined.
-
International Nuclear Information System (INIS)
Kono, Yoshio; Kenney-Benson, Curtis; Park, Changyong; Shen, Guoyin; Shibazaki, Yuki; Wang, Yanbin
2015-01-01
Several X-ray techniques for studying structure, elastic properties, viscosity, and immiscibility of liquids at high pressures have been integrated using a Paris-Edinburgh press at the 16-BM-B beamline of the Advanced Photon Source. Here, we report the development of X-ray imaging techniques suitable for studying behavior of liquids at high pressures and high temperatures. White X-ray radiography allows for imaging phase separation and immiscibility of melts at high pressures, identified not only by density contrast but also by phase contrast imaging in particular for low density contrast liquids such as silicate and carbonate melts. In addition, ultrafast X-ray imaging, at frame rates up to ∼10 5 frames/second (fps) in air and up to ∼10 4 fps in Paris-Edinburgh press, enables us to investigate dynamics of liquids at high pressures. Very low viscosities of melts similar to that of water can be reliably measured. These high-pressure X-ray imaging techniques provide useful tools for understanding behavior of liquids or melts at high pressures and high temperatures
-
Energy Technology Data Exchange (ETDEWEB)
Kono, Yoshio; Kenney-Benson, Curtis; Park, Changyong; Shen, Guoyin [HPCAT, Geophysical Laboratory, Carnegie Institution of Washington, 9700 S. Cass Ave., Argonne, Illinois 60439 (United States); Shibazaki, Yuki [Frontier Research Institute for Interdisciplinary Sciences, Tohoku University, Aramaki aza Aoba 6-3, Aoba-ku, Sendai 980-8578 (Japan); Wang, Yanbin [GeoSoilEnviroCARS, Center for Advanced Radiation Sources, The University of Chicago, 5640 S. Ellis Avenue, Chicago, Illinois 60637 (United States)
2015-07-15
Several X-ray techniques for studying structure, elastic properties, viscosity, and immiscibility of liquids at high pressures have been integrated using a Paris-Edinburgh press at the 16-BM-B beamline of the Advanced Photon Source. Here, we report the development of X-ray imaging techniques suitable for studying behavior of liquids at high pressures and high temperatures. White X-ray radiography allows for imaging phase separation and immiscibility of melts at high pressures, identified not only by density contrast but also by phase contrast imaging in particular for low density contrast liquids such as silicate and carbonate melts. In addition, ultrafast X-ray imaging, at frame rates up to ∼10{sup 5} frames/second (fps) in air and up to ∼10{sup 4} fps in Paris-Edinburgh press, enables us to investigate dynamics of liquids at high pressures. Very low viscosities of melts similar to that of water can be reliably measured. These high-pressure X-ray imaging techniques provide useful tools for understanding behavior of liquids or melts at high pressures and high temperatures.
-
Natural Hazards and the press in the western Mediterranean region
Directory of Open Access Journals (Sweden)
M. Llasat-Botija
2007-07-01
Full Text Available This study analyses press articles published between 1982 and 2005 in an attempt to describe the social perception of natural hazards in Catalonia. The articles included in the database have been classified according to different types of risk. In addition, the study examines the evolution of each type of risk in the press coverage during the study period. Finally, the results have been compared to data provided by insurance companies with respect to compensations paid out for damages. Conclusions show that floods are the most important natural hazard in the region, but that the number of headlines for each event is greater in the case of snowfalls and forest fires. Factors such as the season of the year, the proximity of the affected region to the capital, the topical issues at the time, and the presence of other important news must be considered when the impact in the press is analysed.
-
Advertising presence on the visual configuration of the digital press
Directory of Open Access Journals (Sweden)
Belinda de Frutos Torres
2016-07-01
Full Text Available Visual strength is responsible for one of the mayor changes undergone by the digital press with Internet explosion and the increase of the Informational and Communicational Technologies. The present study analyzes the structure the digital press has taken and the role of the digital advertisement in the composition of their textual and iconic elements. The paper quantifies the picture representations volume and compares their presence on the digital natives papers with those coming from the traditional paper support. The results reveal that there is a mayor contribution of adverts on the native on-line press compare to the on-line paper arriving from the traditional media decreasing the information volume. At the same time the visual volume is boosted on the former compare to the digital media with a paper support. Altogether it can be said that visual component prompted the digital papers first page, being this effect enhanced on the native digital papers.
-
"...Establish the Student Press--And Stifle It!"
McCallie, Franklin
1990-01-01
Presents an acceptance speech by Franklin McCallie, principal of Kirkwood High School (Missouri), for the "Administrator of the Year" award presented by the Missouri Interscholastic Press Association and the Missouri Journalism Education Association in April 1989. Discusses journalism's role in achieving the school's chief goals: student growth,…
-
The Moral Universes of Libertarian Press Theory.
Wuliger, Gregory T.
1991-01-01
Uses Kantian logic to analyze the statement of Libertarian press theory "Truth beats falsehood in a free marketplace of ideas" as a definition, an observation, and a universal truth. Notes three corresponding moral universes, with differing ethical obligations. Discusses strengths and weaknesses of each. Cautions media ethics analysts…
-
[Report from the Student Press Law Center.
Student Press Law Center, Washington, DC.
The Student Press Law Center serves as a national clearinghouse to collect, analyze, and distribute information on the First Amendment rights of student journalists and journalism teachers and on violations of these rights in high schools and colleges. This report details information concerning current censorship incidents: the investigation by…
-
Effect of hot isostatic pressing on the properties of sintered alpha silicon carbide
Watson, G. K.; Moore, T. J.; Millard, M. L.
1985-01-01
Two lots of alpha silicon carbide were isostatically hot-pressed under 138 MPa for 2 h in Ar at temperatures up to 2200 C. Nearly theoretically dense specimens resulted. Hot isostatic pressing increased both room-temperature strength and 1200 C strength, and resulted in improved reliability. One lot of material which was pressed at 2200 C showed increases of about 20 percent in room-temperature strength and about 50 percent in 1200 C flexural strength; the Weibull modulus improved about 100 percent.
-
The Social Theories of the press: journalism and society
Directory of Open Access Journals (Sweden)
Beatriz Marocco
2005-06-01
Full Text Available For a short period of time, between the end of the 19th century and the middle of the 20th, newspapers and journalists were under the spotlight as never before. However, the comprehensive reviews of the theories of the press do not acknowledge the thought of this period and its development into “the social theories of the press” (H. Hardt, 1979. This article is positioned in this gap of press studies, and it uses as a starting point the foucaultian description of the diff erent thresholds that establish the levels of discourse elaboration (Foucault, 1995. It aims at exploring the theoretical production that approximates German and American scholars such as Albert Schäffle (1831-1903; Karl Knies (1821-1898; Karl Bücher (1847-1930; Ferdinand Tönnies (1835-1936; Albion Small (1854-1926; Edward Ross (1856-1951; Max Weber (1864-1920; Robert Park (1864-1944 and Walter Lippmann (1889-1974, rescuing this production from the pre-history of the press to materialize evidence that this production coincides, in its external origin, with the modern newspaper practices, although there seemed to be no dependence between them at the time.
-
Graphite and boron carbide composites made by hot-pressing
International Nuclear Information System (INIS)
Miyazaki, K.; Hagio, T.; Kobayashi, K.
1981-01-01
Composites consisting of graphite and boron carbide were made by hot-pressing mixed powders of coke carbon and boron carbide. The change of relative density, mechanical strength and electrical resistivity of the composites and the X-ray parameters of coke carbon were investigated with increase of boron carbide content and hot-pressing temperature. From these experiments, it was found that boron carbide powder has a remarkable effect on sintering and graphitization of coke carbon powder above the hot-pressing temperature of 2000 0 C. At 2200 0 C, electrical resistivity of the composite and d(002) spacing of coke carbon once showed minimum values at about 5 to 10 wt% boron carbide and then increased. The strength of the composite increased with increase of boron carbide content. It was considered that some boron from boron carbide began to diffuse substitutionally into the graphite structure above 2000 0 C and densification and graphitization were promoted with the diffusion of boron. Improvements could be made to the mechanical strength, density, oxidation resistance and manufacturing methods by comparing with the properties and processes of conventional graphites. (author)
-
The Social Theories of the press: journalism and society
Directory of Open Access Journals (Sweden)
Beatriz Marocco
2011-02-01
Full Text Available For a short period of time, between the end of the 19th century and the middle of the 20th, newspapers and journalists were under the spotlight as never before. However, the comprehensive reviews of the theories of the press do not acknowledge the thought of this period and its development into “the social theories of the press” (H. Hardt, 1979. This article is positioned in this gap of press studies, and it uses as a starting point the foucaultian description of the diff erent thresholds that establish the levels of discourse elaboration (Foucault, 1995. It aims at exploring the theoretical production that approximates German and American scholars such as Albert Schäffle (1831-1903; Karl Knies (1821-1898; Karl Bücher (1847-1930; Ferdinand Tönnies (1835-1936; Albion Small (1854-1926; Edward Ross (1856-1951; Max Weber (1864-1920; Robert Park (1864-1944 and Walter Lippmann (1889-1974, rescuing this production from the pre-history of the press to materialize evidence that this production coincides, in its external origin, with the modern newspaper practices, although there seemed to be no dependence between them at the time.
-
Researching on YH100 Numerical Control Servo Press Hydraulic Control System and Control Algorithm
Directory of Open Access Journals (Sweden)
Kai LI
2014-09-01
Full Text Available In order to study the numerical control (NC servo press hydraulic control system and its control algorithm. The numerical control servo press performance and control principle of hydraulic control system are analyzed. According to the flow equation of the hydraulic control valve, hydraulic cylinder flow continuity equation and the force balance equation of the hydraulic cylinder with load press, the mathematical model of hydraulic control system is established. And the servo press hydraulic system transfer function is deduced. Introducing the suitable immune particle swarm control algorithm for servo press hydraulic system, and the control system block diagram is established. Immune algorithm is used to optimize new control parameters of the system and adopt the new optimization results to optimize the system simulation. The simulation result shows that the hydraulic system’s transition time controlled by the immune particle swarm algorithm is shorter than traditional ones, and the control performance is obviously improved. Finally it can be concluded that immune particle swarm PID control have these characteristics such as quickness, stability and accuracy. Applying this principle into application, the obtained YH100 numerical control servo press hydraulic control system meets the requirement.
-
The year without pants WordPress.com and the future of work
Berkun, Scott
2013-01-01
A behind-the-scenes look at the firm behind WordPress.com and the unique work culture that contributes to its phenomenal success 50 million websites, or twenty percent of the entire web, use WordPress software. The force behind WordPress.com is a convention-defying company called Automattic, Inc., whose 120 employees work from anywhere in the world they wish, barely use email, and launch improvements to their products dozens of times a day. With a fraction of the resources of Google, Amazon, or Facebook, they have a similar impact on the future of the Internet. How is this possible? What's dif
-
Radioactive source security: the cultural challenges.
Englefield, Chris
2015-04-01
Radioactive source security is an essential part of radiation protection. Sources can be abandoned, lost or stolen. If they are stolen, they could be used to cause deliberate harm and the risks are varied and significant. There is a need for a global security protection system and enhanced capability to achieve this. The establishment of radioactive source security requires 'cultural exchanges'. These exchanges include collaboration between: radiation protection specialists and security specialists; the nuclear industry and users of radioactive sources; training providers and regulators/users. This collaboration will facilitate knowledge and experience exchange for the various stakeholder groups, beyond those already provided. This will promote best practice in both physical and information security and heighten security awareness generally. Only if all groups involved are prepared to open their minds to listen to and learn from, each other will a suitable global level of control be achieved. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.