Open source software and libraries

OpenAIRE

Randhawa, Sukhwinder

2008-01-01

Open source software is, software that users have the ability to run, copy, distribute, study, change, share and improve for any purpose. Open source library software’s does not need the initial cost of commercial software and enables libraries to have greater control over their working environment. Library professionals should be aware of the advantages of open source software and should involve in their development. They should have basic knowledge about the selection, installation and main...

Intrinsic Motivation versus Signaling in Open Source Software Development

DEFF Research Database (Denmark)

Bitzer, J; Schrettl, W; Schröder, P

This papers sheds light on the puzzling fact that even though open source software (OSS) is a public good, it is developed for free by highly qualified, young, motivated individuals, and evolves at a rapid pace. We show that when OSS development is understood as the private provision of a public...

Why develop open-source software? The role of non-pecuniary benefits, monetary rewards, and open-source licence type

OpenAIRE

Robert M. Sauer

2007-01-01

A review of the basic theory of optimal open-source software contributions points to three key factors affecting the decision to contribute to the open-source development process: nonpecuniary benefits, future expected monetary returns, and open-source licence type. This paper argues that existing large-scale software developer surveys are inadequate for measuring the relative importance of these three factors. Previous econometric studies that collect their own unique datasets also fall shor...

The Economics of Open Source Software Development: An Introduction

DEFF Research Database (Denmark)

Schröder, Philipp J.H.; Bitzer, Jürgen

2006-01-01

This chapter introduces the fundamentals of Open Source Software, its nature, the central economic aspects and the key mechanisms of its development. Furthermore, we present the themes of the book and provide a first overview for the reader by giving short summaries of its chapters....

The Babel of software development : linguistic diversity in open source

NARCIS (Netherlands)

Vasilescu, B.N.; Serebrenik, A.; Brand, van den M.G.J.; Jatowt, A.; Lim, E.-P.; Ding, Y.

2013-01-01

Open source software (OSS) development communities are typically very specialised, on the one hand, and experience high turnover, on the other. Combination of specialization and turnover can cause parts of the system implemented in a certain programming language to become unmaintainable, if

OSIRIX: open source multimodality image navigation software

Science.gov (United States)

Rosset, Antoine; Pysher, Lance; Spadola, Luca; Ratib, Osman

2005-04-01

The goal of our project is to develop a completely new software platform that will allow users to efficiently and conveniently navigate through large sets of multidimensional data without the need of high-end expensive hardware or software. We also elected to develop our system on new open source software libraries allowing other institutions and developers to contribute to this project. OsiriX is a free and open-source imaging software designed manipulate and visualize large sets of medical images: http://homepage.mac.com/rossetantoine/osirix/

Perspectives on Open Source Software

National Research Council Canada - National Science Library

Hissam, Scott

2001-01-01

Open source software (OSS) is emerging as the software community's next "silver bullet" and appears to be playing a significant role in the acquisition and development plans of the Department of Defense (DoD) and industry...

Open source software and minority languages: a priceless opportunity

Directory of Open Access Journals (Sweden)

Jordi Mas

2003-04-01

Full Text Available Open source software is a form of software that gives its users freedom. With the advent of the Internet, open source software has consolidated as a technically viable, financially sustainable alternative to proprietary software. Languages such as Breton, Galician, Gaelic and Catalan have seen very little development in the world of proprietary software because of the limitations imposed. In contrast, in the world of open source software these languages have been developed with notable success. Open source projects of the importance of the Mozilla browser, the GNOME environment and the GNU/Linux system have complete or partial translations in all these languages. Open source software presents an unprecedented opportunity for the development of minority languages, such as Catalan, in new technologies thanks to the freedom that they guarantee us.

Requirements Specification for Open Source Software Selection

OpenAIRE

YANG, YING

2008-01-01

Open source software has been widely used. The software world is enjoying the advantages of collaboration and cooperation in software development and use with the advent of open source movement. However, little research is concerned about the practical guidelines of OSS selection. It is hard for an organization to make a decision whether they should use the OSS or not, and to select an appropriate one from a number of OSS candidates. This thesis studies how to select an open source software f...

Using ISO/IEC 12207 to analyze open source software development processes: an E-learning case study

OpenAIRE

Krishnamurthy, Aarthy; O'Connor, Rory

2013-01-01

peer-reviewed To date, there is no comprehensive study of open source software development process (OSSDP) carried out for open source (OS) e-learning systems. This paper presents the work which objectively analyzes the open source software development (OSSD) practices carried out by e-learning systems development communities and their results are represented using DEMO models. These results are compared using ISO/IEC 12207:2008. The comparison of DEMO models with ISO/IEC...

Investigating the effects of different factors on development of open source enterprise resources planning software packages

Directory of Open Access Journals (Sweden)

Mehdi Ghorbaninia

2014-08-01

Full Text Available This paper investigates the effects of different factors on development of open source enterprise resources planning software packages. The study designs a questionnaire in Likert scale and distributes it among 210 experts in the field of open source software package development. Cronbach alpha has been calculated as 0.93, which is well above the minimum acceptable level. Using Pearson correlation as well as stepwise regression analysis, the study determines three most important factors including fundamental issues, during and after implementation of open source software development. The study also determines a positive and strong relationship between fundamental factors and after implementation factors (r=0.9006, Sig. = 0.000.

OpenADR Open Source Toolkit: Developing Open Source Software for the Smart Grid

Energy Technology Data Exchange (ETDEWEB)

McParland, Charles

2011-02-01

Demand response (DR) is becoming an increasingly important part of power grid planning and operation. The advent of the Smart Grid, which mandates its use, further motivates selection and development of suitable software protocols to enable DR functionality. The OpenADR protocol has been developed and is being standardized to serve this goal. We believe that the development of a distributable, open source implementation of OpenADR will benefit this effort and motivate critical evaluation of its capabilities, by the wider community, for providing wide-scale DR services

Web accessibility and open source software.

Science.gov (United States)

Obrenović, Zeljko

2009-07-01

A Web browser provides a uniform user interface to different types of information. Making this interface universally accessible and more interactive is a long-term goal still far from being achieved. Universally accessible browsers require novel interaction modalities and additional functionalities, for which existing browsers tend to provide only partial solutions. Although functionality for Web accessibility can be found as open source and free software components, their reuse and integration is complex because they were developed in diverse implementation environments, following standards and conventions incompatible with the Web. To address these problems, we have started several activities that aim at exploiting the potential of open-source software for Web accessibility. The first of these activities is the development of Adaptable Multi-Interface COmmunicator (AMICO):WEB, an infrastructure that facilitates efficient reuse and integration of open source software components into the Web environment. The main contribution of AMICO:WEB is in enabling the syntactic and semantic interoperability between Web extension mechanisms and a variety of integration mechanisms used by open source and free software components. Its design is based on our experiences in solving practical problems where we have used open source components to improve accessibility of rich media Web applications. The second of our activities involves improving education, where we have used our platform to teach students how to build advanced accessibility solutions from diverse open-source software. We are also partially involved in the recently started Eclipse projects called Accessibility Tools Framework (ACTF), the aim of which is development of extensible infrastructure, upon which developers can build a variety of utilities that help to evaluate and enhance the accessibility of applications and content for people with disabilities. In this article we briefly report on these activities.

Agile software development

CERN Document Server

Dingsoyr, Torgeir; Moe, Nils Brede

2010-01-01

Agile software development has become an umbrella term for a number of changes in how software developers plan and coordinate their work, how they communicate with customers and external stakeholders, and how software development is organized in small, medium, and large companies, from the telecom and healthcare sectors to games and interactive media. Still, after a decade of research, agile software development is the source of continued debate due to its multifaceted nature and insufficient synthesis of research results. Dingsoyr, Dyba, and Moe now present a comprehensive snapshot of the kno

Nurturing reliable and robust open-source scientific software

Science.gov (United States)

Uieda, L.; Wessel, P.

2017-12-01

Scientific results are increasingly the product of software. The reproducibility and validity of published results cannot be ensured without access to the source code of the software used to produce them. Therefore, the code itself is a fundamental part of the methodology and must be published along with the results. With such a reliance on software, it is troubling that most scientists do not receive formal training in software development. Tools such as version control, continuous integration, and automated testing are routinely used in industry to ensure the correctness and robustness of software. However, many scientist do not even know of their existence (although efforts like Software Carpentry are having an impact on this issue; software-carpentry.org). Publishing the source code is only the first step in creating an open-source project. For a project to grow it must provide documentation, participation guidelines, and a welcoming environment for new contributors. Expanding the project community is often more challenging than the technical aspects of software development. Maintainers must invest time to enforce the rules of the project and to onboard new members, which can be difficult to justify in the context of the "publish or perish" mentality. This problem will continue as long as software contributions are not recognized as valid scholarship by hiring and tenure committees. Furthermore, there are still unsolved problems in providing attribution for software contributions. Many journals and metrics of academic productivity do not recognize citations to sources other than traditional publications. Thus, some authors choose to publish an article about the software and use it as a citation marker. One issue with this approach is that updating the reference to include new contributors involves writing and publishing a new article. A better approach would be to cite a permanent archive of individual versions of the source code in services such as Zenodo

ProteoWizard: open source software for rapid proteomics tools development.

Science.gov (United States)

Kessner, Darren; Chambers, Matt; Burke, Robert; Agus, David; Mallick, Parag

2008-11-01

The ProteoWizard software project provides a modular and extensible set of open-source, cross-platform tools and libraries. The tools perform proteomics data analyses; the libraries enable rapid tool creation by providing a robust, pluggable development framework that simplifies and unifies data file access, and performs standard proteomics and LCMS dataset computations. The library contains readers and writers of the mzML data format, which has been written using modern C++ techniques and design principles and supports a variety of platforms with native compilers. The software has been specifically released under the Apache v2 license to ensure it can be used in both academic and commercial projects. In addition to the library, we also introduce a rapidly growing set of companion tools whose implementation helps to illustrate the simplicity of developing applications on top of the ProteoWizard library. Cross-platform software that compiles using native compilers (i.e. GCC on Linux, MSVC on Windows and XCode on OSX) is available for download free of charge, at http://proteowizard.sourceforge.net. This website also provides code examples, and documentation. It is our hope the ProteoWizard project will become a standard platform for proteomics development; consequently, code use, contribution and further development are strongly encouraged.

A Systems Thinking Model for Open Source Software Development in Social Media

OpenAIRE

Mustaquim, Moyen

2010-01-01

In this paper a social media model, based on systems thinking methodology is proposed to understand the behavior of the open source software development community working in social media.The proposed model is focused on relational influences of two different systems- social media and the open source community. This model can be useful for taking decisions which are complicated and where solutions are not apparent.Based on the proposed model, an efficient way of working in open source developm...

Develop Direct Geo-referencing System Based on Open Source Software and Hardware Platform

Directory of Open Access Journals (Sweden)

H. S. Liu

2015-08-01

Full Text Available Direct geo-referencing system uses the technology of remote sensing to quickly grasp images, GPS tracks, and camera position. These data allows the construction of large volumes of images with geographic coordinates. So that users can be measured directly on the images. In order to properly calculate positioning, all the sensor signals must be synchronized. Traditional aerial photography use Position and Orientation System (POS to integrate image, coordinates and camera position. However, it is very expensive. And users could not use the result immediately because the position information does not embed into image. To considerations of economy and efficiency, this study aims to develop a direct geo-referencing system based on open source software and hardware platform. After using Arduino microcontroller board to integrate the signals, we then can calculate positioning with open source software OpenCV. In the end, we use open source panorama browser, panini, and integrate all these to open source GIS software, Quantum GIS. A wholesome collection of data – a data processing system could be constructed.

Develop Direct Geo-referencing System Based on Open Source Software and Hardware Platform

Science.gov (United States)

Liu, H. S.; Liao, H. M.

2015-08-01

Direct geo-referencing system uses the technology of remote sensing to quickly grasp images, GPS tracks, and camera position. These data allows the construction of large volumes of images with geographic coordinates. So that users can be measured directly on the images. In order to properly calculate positioning, all the sensor signals must be synchronized. Traditional aerial photography use Position and Orientation System (POS) to integrate image, coordinates and camera position. However, it is very expensive. And users could not use the result immediately because the position information does not embed into image. To considerations of economy and efficiency, this study aims to develop a direct geo-referencing system based on open source software and hardware platform. After using Arduino microcontroller board to integrate the signals, we then can calculate positioning with open source software OpenCV. In the end, we use open source panorama browser, panini, and integrate all these to open source GIS software, Quantum GIS. A wholesome collection of data - a data processing system could be constructed.

An economic perspective on software licenses--open source, maintainers and user-developers

DEFF Research Database (Denmark)

Edwards, Kasper

2005-01-01

This paper presents a model for understanding behaviour of agents using and/or contributing to open source software. The model illustrates behaviour of agents under three licenses regimes: 1) The GPL, The BSD and 3) The Microsoft EULA. The latter license is not an open source license...... licenses induce different incentives and dynamics for maintainer and user-developer and the paper explains, from an economic standpoint, the mechanisms that ensure programs are developed and maintained under the three license regimes....

Decision criteria for software component sourcing: steps towards a framework

NARCIS (Netherlands)

Kusters, R.J.; Pouwelse, L.; Martin, H.; Trienekens, J.J.M.; Hammoudi, Sl.; Maciaszek, L.; Missikoff, M.M.; Camp, O.; Cordeiro, J.

2016-01-01

Software developing organizations nowadays have a wide choice when it comes to sourcing software components. This choice ranges from developing or adapting in-house developed components via buying closed source components to utilizing open source components. This study seeks to determine criteria

Open Source Software Success Model for Iran: End-User Satisfaction Viewpoint

Directory of Open Access Journals (Sweden)

Ali Niknafs

2012-03-01

Full Text Available The open source software development is notable option for software companies. Recent years, many advantages of this software type are cause of move to that in Iran. National security and international restrictions problems and also software and services costs and more other problems intensified importance of use of this software. Users and their viewpoints are the critical success factor in the software plans. But there is not an appropriate model for open source software case in Iran. This research tried to develop a measuring open source software success model for Iran. By use of data gathered from open source users and online survey the model was tested. The results showed that components by positive effect on open source success were user satisfaction, open source community services quality, open source quality, copyright and security.

Review: Niels C. Taubert (2006. Produktive Anarchie? Netzwerke freier Softwareentwicklung [Productive Anarchy? Networks of Open Source Software Development

Directory of Open Access Journals (Sweden)

Matthias Groß

2007-01-01

Full Text Available Open source software is software designed to allow anyone to use and make changes in the software. This practice often renders the product superior to more centralized models such as those used in commercial software companies. How is such a phenomenon possible in a time where nothing seems to be acquirable save by purchase? Niels C. TAUBERT's book Productive Anarchy? Networks of Open Source Software Development aims at a sociological understanding of the prerequisites and conditions for the success of open source software. One of the conclusions of TAUBERT's book is that the process of open software development needs to be understood as adaptive and experimental. A continuous feedback between the context of production and the context of application is the basis for robust and successful software production. One of the surprising results of the book is that the most important requirement for this feedback process is a set of norms—neutrality, communism, disinterestedness, and universalism—norms that Robert MERTON associated with academic science in the 1940s. If TAUBERT is right that these norms are to be found outside the world of institutional science in open source software development projects today, then his case study can be seen as an indicator for a new form of knowledge production in the 21st century, where the social relevance and responsibility of a research process are keys to successful innovation. With this book, which deserves a wide readership, TAUBERT makes an important contribution to our understanding of the successful organization of technology development. URN: urn:nbn:de:0114-fqs0701109

The Ragnarok Software Development Environment

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak

1999-01-01

Ragnarok is an experimental software development environment that focuses on enhanced support for managerial activities in large scale software development taking the daily work of the software developer as its point of departure. The main emphasis is support in three areas: management, navigation......, and collaboration. The leitmotif is the software architecture, which is extended to handle managerial data in addition to source code; this extended software architecture is put under tight version- and configuration management control and furthermore used as basis for visualisation. Preliminary results of using...

A Stigmergy Approach for Open Source Software Developer Community Simulation

Energy Technology Data Exchange (ETDEWEB)

Cui, Xiaohui [ORNL; Beaver, Justin M [ORNL; Potok, Thomas E [ORNL; Pullum, Laura L [ORNL; Treadwell, Jim N [ORNL

2009-01-01

The stigmergy collaboration approach provides a hypothesized explanation about how online groups work together. In this research, we presented a stigmergy approach for building an agent based open source software (OSS) developer community collaboration simulation. We used group of actors who collaborate on OSS projects as our frame of reference and investigated how the choices actors make in contribution their work on the projects determinate the global status of the whole OSS projects. In our simulation, the forum posts and project codes served as the digital pheromone and the modified Pierre-Paul Grasse pheromone model is used for computing developer agent behaviors selection probability.

The role of on-line communication in open source software development

DEFF Research Database (Denmark)

Vujovic, S.; Ulhøi, John Parm

2004-01-01

allow parallel development and dynamic online exchanges during the overall innovation process. In conceptualizing online computer-based innovation process in the form of Open Source Software, the paper will borrow from theory on networks and communities of practice, which take into account social...... the innovation itself and upstream in the value chain to identifying new supporting services. In closing the paper addresses motivations of companies to integrate this alternative and non-proprietary way of product development into their proprietary business model. We do this by presenting an example....

Development of a web application for water resources based on open source software

Science.gov (United States)

Delipetrev, Blagoj; Jonoski, Andreja; Solomatine, Dimitri P.

2014-01-01

This article presents research and development of a prototype web application for water resources using latest advancements in Information and Communication Technologies (ICT), open source software and web GIS. The web application has three web services for: (1) managing, presenting and storing of geospatial data, (2) support of water resources modeling and (3) water resources optimization. The web application is developed using several programming languages (PhP, Ajax, JavaScript, Java), libraries (OpenLayers, JQuery) and open source software components (GeoServer, PostgreSQL, PostGIS). The presented web application has several main advantages: it is available all the time, it is accessible from everywhere, it creates a real time multi-user collaboration platform, the programing languages code and components are interoperable and designed to work in a distributed computer environment, it is flexible for adding additional components and services and, it is scalable depending on the workload. The application was successfully tested on a case study with concurrent multi-users access.

Code Forking, Governance, and Sustainability in Open Source Software

Directory of Open Access Journals (Sweden)

Juho Lindman

2013-01-01

Full Text Available The right to fork open source code is at the core of open source licensing. All open source licenses grant the right to fork their code, that is to start a new development effort using an existing code as its base. Thus, code forking represents the single greatest tool available for guaranteeing sustainability in open source software. In addition to bolstering program sustainability, code forking directly affects the governance of open source initiatives. Forking, and even the mere possibility of forking code, affects the governance and sustainability of open source initiatives on three distinct levels: software, community, and ecosystem. On the software level, the right to fork makes planned obsolescence, versioning, vendor lock-in, end-of-support issues, and similar initiatives all but impossible to implement. On the community level, forking impacts both sustainability and governance through the power it grants the community to safeguard against unfavourable actions by corporations or project leaders. On the business-ecosystem level forking can serve as a catalyst for innovation while simultaneously promoting better quality software through natural selection. Thus, forking helps keep open source initiatives relevant and presents opportunities for the development and commercialization of current and abandoned programs.

Open Source Software and the Intellectual Commons.

Science.gov (United States)

Dorman, David

2002-01-01

Discusses the Open Source Software method of software development and its relationship to control over information content. Topics include digital library resources; reference services; preservation; the legal and economic status of information; technical standards; access to digital data; control of information use; and copyright and patent laws.…

The Five 'R's' for Developing Trusted Software Frameworks to increase confidence in, and maximise reuse of, Open Source Software.

Science.gov (United States)

Fraser, Ryan; Gross, Lutz; Wyborn, Lesley; Evans, Ben; Klump, Jens

2015-04-01

Recent investments in HPC, cloud and Petascale data stores, have dramatically increased the scale and resolution that earth science challenges can now be tackled. These new infrastructures are highly parallelised and to fully utilise them and access the large volumes of earth science data now available, a new approach to software stack engineering needs to be developed. The size, complexity and cost of the new infrastructures mean any software deployed has to be reliable, trusted and reusable. Increasingly software is available via open source repositories, but these usually only enable code to be discovered and downloaded. As a user it is hard for a scientist to judge the suitability and quality of individual codes: rarely is there information on how and where codes can be run, what the critical dependencies are, and in particular, on the version requirements and licensing of the underlying software stack. A trusted software framework is proposed to enable reliable software to be discovered, accessed and then deployed on multiple hardware environments. More specifically, this framework will enable those who generate the software, and those who fund the development of software, to gain credit for the effort, IP, time and dollars spent, and facilitate quantification of the impact of individual codes. For scientific users, the framework delivers reviewed and benchmarked scientific software with mechanisms to reproduce results. The trusted framework will have five separate, but connected components: Register, Review, Reference, Run, and Repeat. 1) The Register component will facilitate discovery of relevant software from multiple open source code repositories. The registration process of the code should include information about licensing, hardware environments it can be run on, define appropriate validation (testing) procedures and list the critical dependencies. 2) The Review component is targeting on the verification of the software typically against a set of

A Systematic Literature Review on relationship between agile methods and Open Source Software Development methodology

OpenAIRE

Gandomani, Taghi Javdani; Zulzalil, Hazura; Ghani, Abdul Azim Abdul; Sultan, Abu Bakar Md

2013-01-01

Agile software development methods (ASD) and open source software development methods (OSSD) are two different approaches which were introduced in last decade and both of them have their fanatical advocators. Yet, it seems that relation and interface between ASD and OSSD is a fertile area and few rigorous studies have been done in this matter. Major goal of this study was assessment of the relation and integration of ASD and OSSD. Analyzing of collected data shows that ASD and OSSD are able t...

GIS-Based Noise Simulation Open Source Software: N-GNOIS

Science.gov (United States)

Vijay, Ritesh; Sharma, A.; Kumar, M.; Shende, V.; Chakrabarti, T.; Gupta, Rajesh

2015-12-01

Geographical information system (GIS)-based noise simulation software (N-GNOIS) has been developed to simulate the noise scenario due to point and mobile sources considering the impact of geographical features and meteorological parameters. These have been addressed in the software through attenuation modules of atmosphere, vegetation and barrier. N-GNOIS is a user friendly, platform-independent and open geospatial consortia (OGC) compliant software. It has been developed using open source technology (QGIS) and open source language (Python). N-GNOIS has unique features like cumulative impact of point and mobile sources, building structure and honking due to traffic. Honking is the most common phenomenon in developing countries and is frequently observed on any type of roads. N-GNOIS also helps in designing physical barrier and vegetation cover to check the propagation of noise and acts as a decision making tool for planning and management of noise component in environmental impact assessment (EIA) studies.

Open source in Finnish software companies

OpenAIRE

Seppä, Arto

2006-01-01

This paper explores survey data focusing on open source software supply collected from 170 Finnish software firms using descriptive statistical analysis. The first half of the report contains general data about software companies and the differences between proprietary and open source firms. The second half focuses on open source firms. A subject of analysis are copyrights, products and services supply, the firms’ relationships with the open source community, and their views on opportunities ...

Towards the Application of Open Source Software in Developing National Electronic Health Record-Narrative Review Article.

Science.gov (United States)

Aminpour, Farzaneh; Sadoughi, Farahnaz; Ahmadi, Maryam

2013-12-01

Electronic Health Record (EHR) is a repository of patient health information shared among multiple authorized users. As a modern method of storing and processing health information, it is a solution for improving quality, safety and efficiency of patient care and health system. However, establishment of EHR requires a significant investment of time and money. While many of healthcare providers have very limited capital, application of open source software would be considered as a solution in developing national electronic health record especially in countries with low income. The evidence showed that financial limitation is one of the obstacles to implement electronic health records in developing countries. Therefore, establishment of an open source EHR system capable of modifications according to the national requirements seems to be inevitable in Iran. The present study identifies the impact of application of open source software in developing national electronic health record in Iran.

How to use Open Source Software for Manage a Library System

OpenAIRE

Sumithchandra, Pandula

2009-01-01

Open source is an approach to the design, development, and distribution of software, offering practical accessibility to a software's source code. Some consider open source as one of various possible design approaches, while others consider it a critical strategic element of their operations. Before open source became widely adopted, developers and producers used a variety of phrases to describe the concept; the term open source gained popularity with the rise of the Internet, which provided ...

Free for All: Open Source Software

Science.gov (United States)

Schneider, Karen

2008-01-01

Open source software has become a catchword in libraryland. Yet many remain unclear about open source's benefits--or even what it is. So what is open source software (OSS)? It's software that is free in every sense of the word: free to download, free to use, and free to view or modify. Most OSS is distributed on the Web and one doesn't need to…

Inequalities in Open Source Software Development: Analysis of Contributor's Commits in Apache Software Foundation Projects.

Science.gov (United States)

Chełkowski, Tadeusz; Gloor, Peter; Jemielniak, Dariusz

2016-01-01

While researchers are becoming increasingly interested in studying OSS phenomenon, there is still a small number of studies analyzing larger samples of projects investigating the structure of activities among OSS developers. The significant amount of information that has been gathered in the publicly available open-source software repositories and mailing-list archives offers an opportunity to analyze projects structures and participant involvement. In this article, using on commits data from 263 Apache projects repositories (nearly all), we show that although OSS development is often described as collaborative, but it in fact predominantly relies on radically solitary input and individual, non-collaborative contributions. We also show, in the first published study of this magnitude, that the engagement of contributors is based on a power-law distribution.

The case for open-source software in drug discovery.

Science.gov (United States)

DeLano, Warren L

2005-02-01

Widespread adoption of open-source software for network infrastructure, web servers, code development, and operating systems leads one to ask how far it can go. Will "open source" spread broadly, or will it be restricted to niches frequented by hopeful hobbyists and midnight hackers? Here we identify reasons for the success of open-source software and predict how consumers in drug discovery will benefit from new open-source products that address their needs with increased flexibility and in ways complementary to proprietary options.

MEASURING PRODUCTIVITY OF SOFTWARE DEVELOPMENT TEAMS

Directory of Open Access Journals (Sweden)

Goparaju Purna Sudhakar

2012-02-01

Full Text Available This paper gives an exhaustive literature review of the techniques and models available tomeasure the productivity of software development teams. Definition of productivity, measuringindividual programmer’s productivity, and measuring software development team productivity arediscussed. Based on the literature review it was found that software productivity measurement canbe done using SLOC (Source Lines of Code, function points, use case points, object points, andfeature points. Secondary research findings indicate that the team size, response time, taskcomplexity, team climate and team cohesion have an impact on software development teamproductivity. List of factors affecting the software development team productivity are studied andreviewed.

On the Prospects and Concerns of Integrating Open Source Software Environment in Software Engineering Education

Science.gov (United States)

Kamthan, Pankaj

2007-01-01

Open Source Software (OSS) has introduced a new dimension in software community. As the development and use of OSS becomes prominent, the question of its integration in education arises. In this paper, the following practices fundamental to projects and processes in software engineering are examined from an OSS perspective: project management;…

BENEFITS AND SUCCESS FACTORS OF OPEN-SOURCE WEB SERVICES DEVELOPMENT PLATFORMS FOR SMALL SOFTWARE HOUSES

Directory of Open Access Journals (Sweden)

Valter de Assis Moreno Jr.

2012-12-01

Full Text Available It is usually difficult for companies to keep up with the development of new information technologies and adapt to them in face of the opportunities and threats their advances may represent. This is especially true for small and medium enterprises (SME in emerging economies, where resources tend to be scarce and markets more volatile. This paper describes an action research conducted in a small Brazilian software house that adopted an open-source Web Services development platform in order to improve its software development process. Data analysis revealed critical success factors (CSF in the adoption process, as well as specific benefits and barriers prone to be faced by small software houses in their adoption efforts. In the process of overcoming such barriers, SME may acquire intellectual capital that represents an essential resource to ensure their competitiveness and survival in emerging economies.

Free Open Source Software: Social Phenomenon, New Management, New Business Models

Directory of Open Access Journals (Sweden)

Žilvinas Jančoras

2011-08-01

Full Text Available In the paper assumptions of free open source software existence, development, financing and competition models are presented. The free software as a social phenomenon and the open source software as the technological and managerial innovation environment are revealed. The social and business interaction processes are analyzed.Article in Lithuanian

PROTEINCHALLENGE: Crowd sourcing in proteomics analysis and software development

DEFF Research Database (Denmark)

Martin, Sarah F.; Falkenberg, Heiner; Dyrlund, Thomas Franck

2013-01-01

, including arguments for community-wide open source software development and “big data” compatible solutions for the future. For the meantime, we have laid out ten top tips for data processing. With these at hand, a first large-scale proteomics analysis hopefully becomes less daunting to navigate......, with the aim of setting a community-driven gold standard for data handling, reporting and sharing. This article is part of a Special Issue entitled: New Horizons and Applications for Proteomics [EuPA 2012].......In large-scale proteomics studies there is a temptation, after months of experimental work, to plug resulting data into a convenient—if poorly implemented—set of tools, which may neither do the data justice nor help answer the scientific question. In this paper we have captured key concerns...

Exploring the impact of socio-technical core-periphery structures in open source software development

NARCIS (Netherlands)

Amrit, Chintan Amrit; van Hillegersberg, Jos

2010-01-01

In this paper we apply the social network concept of core-periphery structure to the socio-technical structure of a software development team. We propose a socio-technical pattern that can be used to locate emerging coordination problems in Open Source projects. With the help of our tool and method

An Organizational Perspective on Free and Open Source Software Development

DEFF Research Database (Denmark)

Vujovic, Sladjana; Ulhøi, John Parm

2006-01-01

The traditional model of innovation, the restricted/close source (R/CS) model, is based on proprietary knowledge and private model of production. A fundamental different one, the open source model is based on non-proprietary knowledge and non-economic motives. Moreover, between the two......, there are various combinations or hybrids, in the following referred to as free/open source-based (F/OS-based) agency. In the discussions, practical examples from software production are included. In conclusion, the paper identifies avenues for future research as well as important managerial and policy implications....

How Open Source Has Changed the Software Industry: Perspectives from Open Source Entrepreneurs

OpenAIRE

Lindman, Juho; Rajala, Risto

2012-01-01

The emergence of F/LOSS (free/libre open source software) has triggered several changes in the software industry. F/LOSS has been cited as an archetypal form of open innovation; it consists of the convergence and collaboration of like-minded parties. An increasing number of software firms have taken upon this approach to link outsiders into their service development and product design. Also, software firms have been increasingly grounded their business models on user-centric and service-orien...

How Do Open Source Communities Document Software Architecture: An Exploratory Survey

NARCIS (Netherlands)

Ding, W.; Liang, P.; Tang, A.; Van Vliet, H.; Shahin, M.

2014-01-01

Software architecture (SA) documentation provides a blueprint of a software-intensive system for the communication between stakeholders about the high-level design of the system. In open source software (OSS) development, a lack of SA documentation may hinder the use and further development of OSS,

Space and Missile Systems Center Standard: Software Development

Science.gov (United States)

2015-01-16

waterfall development lifecycle models . Source: Adapted from (IEEE 610.12) See (IEEE 1074) for more information. Software ...spiral, and waterfall lifecycle models .) 2. The developer shall record the selected software development lifecycle model (s) in the Software ...through i.e., waterfall , lifecycle model , the following requirements apply with the interpretation that the software is developed as a single build.

PROTEINCHALLENGE: Crowd sourcing in proteomics analysis and software development

DEFF Research Database (Denmark)

Martin, Sarah F.; Falkenberg, Heiner; Dyrlund, Thomas Franck

2013-01-01

, including arguments for community-wide open source software development and “big data” compatible solutions for the future. For the meantime, we have laid out ten top tips for data processing. With these at hand, a first large-scale proteomics analysis hopefully becomes less daunting to navigate.......However there is clearly a real need for robust tools, standard operating procedures and general acceptance of best practises. Thus we submit to the proteomics community a call for a community-wide open set of proteomics analysis challenges—PROTEINCHALLENGE—that directly target and compare data analysis workflows......In large-scale proteomics studies there is a temptation, after months of experimental work, to plug resulting data into a convenient—if poorly implemented—set of tools, which may neither do the data justice nor help answer the scientific question. In this paper we have captured key concerns...

Inequalities in Open Source Software Development: Analysis of Contributor’s Commits in Apache Software Foundation Projects

Science.gov (United States)

2016-01-01

While researchers are becoming increasingly interested in studying OSS phenomenon, there is still a small number of studies analyzing larger samples of projects investigating the structure of activities among OSS developers. The significant amount of information that has been gathered in the publicly available open-source software repositories and mailing-list archives offers an opportunity to analyze projects structures and participant involvement. In this article, using on commits data from 263 Apache projects repositories (nearly all), we show that although OSS development is often described as collaborative, but it in fact predominantly relies on radically solitary input and individual, non-collaborative contributions. We also show, in the first published study of this magnitude, that the engagement of contributors is based on a power-law distribution. PMID:27096157

Supporting global software development in open source ecosystems: a role for actability in the Pragmatic Web

OpenAIRE

Agerfalk, Par J.

2006-01-01

peer-reviewed New forms of collaboration between organizations based on open source principles are rapidly emerging. The collaboration is typically done in a spirit of co-opetition whereby companies, often SMEs, share cost and risk by developing software jointly and openly. The paper elaborates how this emerging phenomenon of open source ecosystems can be understood from the perspective of actability and the Pragmatic Web. The concept of open source ecosystems as a form o...

Open Source Software Development Experiences on the Students' Resumes: Do They Count?--Insights from the Employers' Perspectives

Science.gov (United States)

Long, Ju

2009-01-01

Open Source Software (OSS) is a major force in today's Information Technology (IT) landscape. Companies are increasingly using OSS in mission-critical applications. The transparency of the OSS technology itself with openly available source codes makes it ideal for students to participate in the OSS project development. OSS can provide unique…

Practical open source software for libraries

CERN Document Server

Engard, Nicole

2010-01-01

Open source refers to an application whose source code is made available for use or modification as users see fit. This means libraries gain more flexibility and freedom than with software purchased with license restrictions. Both the open source community and the library world live by the same rules and principles. Practical Open Source Software for Libraries explains the facts and dispels myths about open source. Chapters introduce librarians to open source and what it means for libraries. The reader is provided with links to a toolbox full of freely available open source products to use in

Maintaining Quality and Confidence in Open-Source, Evolving Software: Lessons Learned with PFLOTRAN

Science.gov (United States)

Frederick, J. M.; Hammond, G. E.

2017-12-01

Software evolution in an open-source framework poses a major challenge to a geoscientific simulator, but when properly managed, the pay-off can be enormous for both the developers and the community at large. Developers must juggle implementing new scientific process models, adopting increasingly efficient numerical methods and programming paradigms, changing funding sources (or total lack of funding), while also ensuring that legacy code remains functional and reported bugs are fixed in a timely manner. With robust software engineering and a plan for long-term maintenance, a simulator can evolve over time incorporating and leveraging many advances in the computational and domain sciences. In this positive light, what practices in software engineering and code maintenance can be employed within open-source development to maximize the positive aspects of software evolution and community contributions while minimizing its negative side effects? This presentation will discusses steps taken in the development of PFLOTRAN (www.pflotran.org), an open source, massively parallel subsurface simulator for multiphase, multicomponent, and multiscale reactive flow and transport processes in porous media. As PFLOTRAN's user base and development team continues to grow, it has become increasingly important to implement strategies which ensure sustainable software development while maintaining software quality and community confidence. In this presentation, we will share our experiences and "lessons learned" within the context of our open-source development framework and community engagement efforts. Topics discussed will include how we've leveraged both standard software engineering principles, such as coding standards, version control, and automated testing, as well unique advantages of object-oriented design in process model coupling, to ensure software quality and confidence. We will also be prepared to discuss the major challenges faced by most open-source software teams, such

Cost Optimization Through Open Source Software

Directory of Open Access Journals (Sweden)

Mark VonFange

2010-12-01

Full Text Available The cost of information technology (IT as a percentage of overall operating and capital expenditures is growing as companies modernize their operations and as IT becomes an increasingly indispensable part of company resources. The price tag associated with IT infrastructure is a heavy one, and, in today's economy, companies need to look for ways to reduce overhead while maintaining quality operations and staying current with technology. With its advancements in availability, usability, functionality, choice, and power, free/libre open source software (F/LOSS provides a cost-effective means for the modern enterprise to streamline its operations. iXsystems wanted to quantify the benefits associated with the use of open source software at their company headquarters. This article is the outgrowth of our internal analysis of using open source software instead of commercial software in all aspects of company operations.

Embracing Open Software Development in Solar Physics

Science.gov (United States)

Hughitt, V. K.; Ireland, J.; Christe, S.; Mueller, D.

2012-12-01

We discuss two ongoing software projects in solar physics that have adopted best practices of the open source software community. The first, the Helioviewer Project, is a powerful data visualization tool which includes online and Java interfaces inspired by Google Maps (tm). This effort allows users to find solar features and events of interest, and download the corresponding data. Having found data of interest, the user now has to analyze it. The dominant solar data analysis platform is an open-source library called SolarSoft (SSW). Although SSW itself is open-source, the programming language used is IDL, a proprietary language with licensing costs that are prohibative for many institutions and individuals. SSW is composed of a collection of related scripts written by missions and individuals for solar data processing and analysis, without any consistent data structures or common interfaces. Further, at the time when SSW was initially developed, many of the best software development processes of today (mirrored and distributed version control, unit testing, continuous integration, etc.) were not standard, and have not since been adopted. The challenges inherent in developing SolarSoft led to a second software project known as SunPy. SunPy is an open-source Python-based library which seeks to create a unified solar data analysis environment including a number of core datatypes such as Maps, Lightcurves, and Spectra which have consistent interfaces and behaviors. By taking advantage of the large and sophisticated body of scientific software already available in Python (e.g. SciPy, NumPy, Matplotlib), and by adopting many of the best practices refined in open-source software development, SunPy has been able to develop at a very rapid pace while still ensuring a high level of reliability. The Helioviewer Project and SunPy represent two pioneering technologies in solar physics - simple yet flexible data visualization and a powerful, new data analysis environment. We

Analysis of open source GIS software

OpenAIRE

Božnis, Andrius

2006-01-01

GIS is one of the most perspective information technology sciences sphere. GIS conjuncts the digital image analysis and data base systems. This makes GIS wide applicable and very high skills demanding system. There is a lot of commercial GIS software which is well advertised and which functionality is pretty well known, while open source software is forgotten. In this diploma work is made analysis of available open source GIS software on the Internet, in the scope of different projects interr...

The role of open-source software in innovation and standardization in radiology.

Science.gov (United States)

Erickson, Bradley J; Langer, Steve; Nagy, Paul

2005-11-01

The use of open-source software (OSS), in which developers release the source code to applications they have developed, is popular in the software industry. This is done to allow others to modify and improve software (which may or may not be shared back to the community) and to allow others to learn from the software. Radiology was an early participant in this model, supporting OSS that implemented the ACR-National Electrical Manufacturers Association (now Digital Imaging and Communications in Medicine) standard for medical image communications. In radiology and in other fields, OSS has promoted innovation and the adoption of standards. Popular OSS is of high quality because access to source code allows many people to identify and resolve errors. Open-source software is analogous to the peer-review scientific process: one must be able to see and reproduce results to understand and promote what is shared. The authors emphasize that support for OSS need not threaten vendors; most vendors embrace and benefit from standards. Open-source development does not replace vendors but more clearly defines their roles, typically focusing on areas in which proprietary differentiators benefit customers and on professional services such as implementation planning and service. Continued support for OSS is essential for the success of our field.

Open-Source Software in Computational Research: A Case Study

Directory of Open Access Journals (Sweden)

Sreekanth Pannala

2008-04-01

Full Text Available A case study of open-source (OS development of the computational research software MFIX, used for multiphase computational fluid dynamics simulations, is presented here. The verification and validation steps required for constructing modern computational software and the advantages of OS development in those steps are discussed. The infrastructure used for enabling the OS development of MFIX is described. The impact of OS development on computational research and education in gas-solids flow, as well as the dissemination of information to other areas such as geophysical and volcanology research, is demonstrated. This study shows that the advantages of OS development were realized in the case of MFIX: verification by many users, which enhances software quality; the use of software as a means for accumulating and exchanging information; the facilitation of peer review of the results of computational research.

Selection and Management of Open Source Software in Libraries

OpenAIRE

Vimal Kumar, V.

2007-01-01

Open source software was a revolutionary concept among computer programmers and users. To a certain extent open source solutions could provide an alternative solution to costly commercial software. Open source software is, software that users have the ability to run, copy, distribute, study, change, share and improve for any purpose. Open source library software’s does not need the initial cost of commercial software and enables libraries to have greater control over their working environmen...

A Conceptual Framework for Lean Regulated Software Development

DEFF Research Database (Denmark)

Cawley, Oisin; Richardson, Ita; Wang, Xiaofeng

2015-01-01

for software development within a regulated environment? This poster presents the results of our empirical research into lean and regulated software development. Built from a combination of data sources, we have developed a conceptual framework comprising five primary components. In addition the relationships...... they have with both the central focus of the framework (the situated software development practices) and with each other are indicated....

VALUATION OF OPEN SOURCE SOFTWARE: HOW DO YOU PUT A VALUE ON FREE?

Directory of Open Access Journals (Sweden)

Jesús García-García

2013-04-01

Full Text Available The aim of this study is to assess the financial reporting framework applied to open source software. Open sourcing software developments means sharing technology and resources with communities worldwide to help eliminate the digital divide, create economic opportunity, and support equal access to technology. Therefore, a methodological approach is needed to assess properly the performance and the value generation potential and to put such measure into organizational reports. International financial reporting framework is checked over conditions to allow value recognition of open sourced assets. Linux kernel development value is estimated to reflect worth of open source developments despite absence of book value due to inexistence of a single cost source. Several attempts to estimate a valuation of open source software have been performed previously. However, this study is the first to judge suitability of accounting framework to report on this value. The main finding is that open sourced assets do not fully accomplish conditions to be included in financial reports. We seek to stimulate academic and professional debate about the pursuit of valuation of a large and efficient ecosystem of software innovation, freely available to society.

Recent Developments in Low-Level Software Security

OpenAIRE

Agten , Pieter; Nikiforakis , Nick; Strackx , Raoul; Groef , Willem ,; Piessens , Frank

2012-01-01

Part 1: Keynotes; International audience; An important objective for low-level software security research is to develop techniques that make it harder to launch attacks that exploit implementation details of the system under attack. Baltopoulos and Gordon have summarized this as the principle of source-based reasoning for security: security properties of a software system should follow from review of the source code and its source-level semantics, and should not depend on details of the compi...

Open Source Software in Medium Size Organizations: Key Factors for Adoption

Science.gov (United States)

Solomon, Jerry T.

2010-01-01

For-profit organizations are constantly evaluating new technologies to gain competitive advantage. One such technology, application software, has changed significantly over the past 25 years with the introduction of Open Source Software (OSS). In contrast to commercial software that is developed by private companies and sold to organizations, OSS…

PySE: Software for extracting sources from radio images

Science.gov (United States)

Carbone, D.; Garsden, H.; Spreeuw, H.; Swinbank, J. D.; van der Horst, A. J.; Rowlinson, A.; Broderick, J. W.; Rol, E.; Law, C.; Molenaar, G.; Wijers, R. A. M. J.

2018-04-01

PySE is a Python software package for finding and measuring sources in radio telescope images. The software was designed to detect sources in the LOFAR telescope images, but can be used with images from other radio telescopes as well. We introduce the LOFAR Telescope, the context within which PySE was developed, the design of PySE, and describe how it is used. Detailed experiments on the validation and testing of PySE are then presented, along with results of performance testing. We discuss some of the current issues with the algorithms implemented in PySE and their interaction with LOFAR images, concluding with the current status of PySE and its future development.

Development of a gamma ray spectrometry software for neutron activation analysis using the open source concept

International Nuclear Information System (INIS)

Lucia, Silvio Rogerio de; Maihara, Vera Akiko; Menezes, Mario O. de

2009-01-01

In this work, a new software - SAANI (Instrumental Neutron Activation Analysis Software) was developed and used for gamma ray spectra analysis in the Neutron Activation Laboratory (LAN) of the Nuclear and Energetic Research Institute (IPEN-CNEN/SP). The software was developed to completely replace the old one - VISPECT. Besides the visual improvement in the user interface, the new software will allow the standardization of several procedures which are done nowadays in several different ways by each researcher, avoiding intermediate steps in the calculations. By using a modern programming language - Python, together with the graphical library Qt (by Trolltech), both multi-platform, the new software is able to run in Windows, Linux and other platforms. In addition to this, the new software has being designed to be extensible through plug-ins. In order to achieve the proposed initial scope, that is, completely replace the old software, SAANI has undergone several and different kinds of tests, using spectra from certified reference materials, standards and common spectra already analyzed by other software or that were used in international inter-comparisons. The results obtained by SAANI in all tests were considered very good. Some small discrepancies were found and after careful search and analysis, their source was identified as being an accuracy bug in the old software. Usability and robustness tests were conducted by installing SAANI in several laboratory computers and following them during daily utilization. The results of these tests also indicated that SAANI was ready to be used by all researchers in the LAN-IPEN. (author)

Development of thermohydraulic software for PWR reactors with natural circulation

International Nuclear Information System (INIS)

Chasseur, Alfredo F.; Rauschert, A.; Delmastro, Dario F.

2009-01-01

The basics concepts about the development of software for steady state analysis of a reactor with natural circulations, in the primary circuit, are exposed. The reactor type is pressurized light water. The equations, correlations and flux diagrams of the source code of the software developed are shown. The source code of the software was written in FORTRAN 77 making use of modular technique, this save development effort and release of news versions is simplified. (author)

Open source hardware and software platform for robotics and artificial intelligence applications

Science.gov (United States)

Liang, S. Ng; Tan, K. O.; Lai Clement, T. H.; Ng, S. K.; Mohammed, A. H. Ali; Mailah, Musa; Azhar Yussof, Wan; Hamedon, Zamzuri; Yussof, Zulkifli

2016-02-01

Recent developments in open source hardware and software platforms (Android, Arduino, Linux, OpenCV etc.) have enabled rapid development of previously expensive and sophisticated system within a lower budget and flatter learning curves for developers. Using these platform, we designed and developed a Java-based 3D robotic simulation system, with graph database, which is integrated in online and offline modes with an Android-Arduino based rubbish picking remote control car. The combination of the open source hardware and software system created a flexible and expandable platform for further developments in the future, both in the software and hardware areas, in particular in combination with graph database for artificial intelligence, as well as more sophisticated hardware, such as legged or humanoid robots.

Open source hardware and software platform for robotics and artificial intelligence applications

International Nuclear Information System (INIS)

Liang, S Ng; Tan, K O; Clement, T H Lai; Ng, S K; Mohammed, A H Ali; Mailah, Musa; Yussof, Wan Azhar; Hamedon, Zamzuri; Yussof, Zulkifli

2016-01-01

Recent developments in open source hardware and software platforms (Android, Arduino, Linux, OpenCV etc.) have enabled rapid development of previously expensive and sophisticated system within a lower budget and flatter learning curves for developers. Using these platform, we designed and developed a Java-based 3D robotic simulation system, with graph database, which is integrated in online and offline modes with an Android-Arduino based rubbish picking remote control car. The combination of the open source hardware and software system created a flexible and expandable platform for further developments in the future, both in the software and hardware areas, in particular in combination with graph database for artificial intelligence, as well as more sophisticated hardware, such as legged or humanoid robots. (paper)

Intellectual Property Protection of Software – At the Crossroads of Software Patents and Open Source Software

OpenAIRE

Tantarimäki, Maria

2018-01-01

The thesis considers the intellectual property protection of software in Europe and in the US, which is increasingly important subject as the world is globalizing and digitalizing. The special nature of software has challenges the intellectual property rights. The current protection of software is based on copyright protection but in this thesis, two other options are considered: software patents and open source software. Software patents provide strong protection for software whereas the pur...

Code Forking, Governance, and Sustainability in Open Source Software

OpenAIRE

Juho Lindman; Linus Nyman

2013-01-01

The right to fork open source code is at the core of open source licensing. All open source licenses grant the right to fork their code, that is to start a new development effort using an existing code as its base. Thus, code forking represents the single greatest tool available for guaranteeing sustainability in open source software. In addition to bolstering program sustainability, code forking directly affects the governance of open source initiatives. Forking, and even the mere possibilit...

Automated real-time software development

Science.gov (United States)

Jones, Denise R.; Walker, Carrie K.; Turkovich, John J.

1993-01-01

A Computer-Aided Software Engineering (CASE) system has been developed at the Charles Stark Draper Laboratory (CSDL) under the direction of the NASA Langley Research Center. The CSDL CASE tool provides an automated method of generating source code and hard copy documentation from functional application engineering specifications. The goal is to significantly reduce the cost of developing and maintaining real-time scientific and engineering software while increasing system reliability. This paper describes CSDL CASE and discusses demonstrations that used the tool to automatically generate real-time application code.

Agile Acceptance Test-Driven Development of Clinical Decision Support Advisories: Feasibility of Using Open Source Software.

Science.gov (United States)

Basit, Mujeeb A; Baldwin, Krystal L; Kannan, Vaishnavi; Flahaven, Emily L; Parks, Cassandra J; Ott, Jason M; Willett, Duwayne L

2018-04-13

Moving to electronic health records (EHRs) confers substantial benefits but risks unintended consequences. Modern EHRs consist of complex software code with extensive local configurability options, which can introduce defects. Defects in clinical decision support (CDS) tools are surprisingly common. Feasible approaches to prevent and detect defects in EHR configuration, including CDS tools, are needed. In complex software systems, use of test-driven development and automated regression testing promotes reliability. Test-driven development encourages modular, testable design and expanding regression test coverage. Automated regression test suites improve software quality, providing a "safety net" for future software modifications. Each automated acceptance test serves multiple purposes, as requirements (prior to build), acceptance testing (on completion of build), regression testing (once live), and "living" design documentation. Rapid-cycle development or "agile" methods are being successfully applied to CDS development. The agile practice of automated test-driven development is not widely adopted, perhaps because most EHR software code is vendor-developed. However, key CDS advisory configuration design decisions and rules stored in the EHR may prove amenable to automated testing as "executable requirements." We aimed to establish feasibility of acceptance test-driven development of clinical decision support advisories in a commonly used EHR, using an open source automated acceptance testing framework (FitNesse). Acceptance tests were initially constructed as spreadsheet tables to facilitate clinical review. Each table specified one aspect of the CDS advisory's expected behavior. Table contents were then imported into a test suite in FitNesse, which queried the EHR database to automate testing. Tests and corresponding CDS configuration were migrated together from the development environment to production, with tests becoming part of the production regression test

Software Quality in the Trenches: Two Case Studies of Quality Assurance Practices in Free/Libre and Open Source Software (FLOSS)

OpenAIRE

Vestbø, Tor Arne

2007-01-01

When proponents of open source software are asked to explain the success of their movement they typically point to the quality of the software produced, which is in turn attributed to the rather unconventional development model of releasing unfinished versions of the software and having users look over the code and report and fix bugs. This thesis investigates the open source quality assurance model from a knowledge management perspective based on the assumption that debugging involves a h...

Open Source software and social networks: Disruptive alternatives for medical imaging

International Nuclear Information System (INIS)

Ratib, Osman; Rosset, Antoine; Heuberger, Joris

2011-01-01

In recent decades several major changes in computer and communication technology have pushed the limits of imaging informatics and PACS beyond the traditional system architecture providing new perspectives and innovative approach to a traditionally conservative medical community. Disruptive technologies such as the world-wide-web, wireless networking, Open Source software and recent emergence of cyber communities and social networks have imposed an accelerated pace and major quantum leaps in the progress of computer and technology infrastructure applicable to medical imaging applications. Methods: This paper reviews the impact and potential benefits of two major trends in consumer market software development and how they will influence the future of medical imaging informatics. Open Source software is emerging as an attractive and cost effective alternative to traditional commercial software developments and collaborative social networks provide a new model of communication that is better suited to the needs of the medical community. Observations: Evidence shows that successful Open Source software tools have penetrated the medical market and have proven to be more robust and cost effective than their commercial counterparts. Developed by developers that are themselves part of the user community, these tools are usually better adapted to the user's need and are more robust than traditional software programs being developed and tested by a large number of contributing users. This context allows a much faster and more appropriate development and evolution of the software platforms. Similarly, communication technology has opened up to the general public in a way that has changed the social behavior and habits adding a new dimension to the way people communicate and interact with each other. The new paradigms have also slowly penetrated the professional market and ultimately the medical community. Secure social networks allowing groups of people to easily communicate

Open Source software and social networks: Disruptive alternatives for medical imaging

Energy Technology Data Exchange (ETDEWEB)

Ratib, Osman, E-mail: osman.ratib@hcuge.ch [Department of Medical Imaging and Information Sciences, University Hospital of Geneva, 24, rue Micheli-du-Crest, 1205 Geneva (Switzerland); Rosset, Antoine; Heuberger, Joris [Department of Medical Imaging and Information Sciences, University Hospital of Geneva, 24, rue Micheli-du-Crest, 1205 Geneva (Switzerland)

2011-05-15

In recent decades several major changes in computer and communication technology have pushed the limits of imaging informatics and PACS beyond the traditional system architecture providing new perspectives and innovative approach to a traditionally conservative medical community. Disruptive technologies such as the world-wide-web, wireless networking, Open Source software and recent emergence of cyber communities and social networks have imposed an accelerated pace and major quantum leaps in the progress of computer and technology infrastructure applicable to medical imaging applications. Methods: This paper reviews the impact and potential benefits of two major trends in consumer market software development and how they will influence the future of medical imaging informatics. Open Source software is emerging as an attractive and cost effective alternative to traditional commercial software developments and collaborative social networks provide a new model of communication that is better suited to the needs of the medical community. Observations: Evidence shows that successful Open Source software tools have penetrated the medical market and have proven to be more robust and cost effective than their commercial counterparts. Developed by developers that are themselves part of the user community, these tools are usually better adapted to the user's need and are more robust than traditional software programs being developed and tested by a large number of contributing users. This context allows a much faster and more appropriate development and evolution of the software platforms. Similarly, communication technology has opened up to the general public in a way that has changed the social behavior and habits adding a new dimension to the way people communicate and interact with each other. The new paradigms have also slowly penetrated the professional market and ultimately the medical community. Secure social networks allowing groups of people to easily

Open Source software and social networks: disruptive alternatives for medical imaging.

Science.gov (United States)

Ratib, Osman; Rosset, Antoine; Heuberger, Joris

2011-05-01

In recent decades several major changes in computer and communication technology have pushed the limits of imaging informatics and PACS beyond the traditional system architecture providing new perspectives and innovative approach to a traditionally conservative medical community. Disruptive technologies such as the world-wide-web, wireless networking, Open Source software and recent emergence of cyber communities and social networks have imposed an accelerated pace and major quantum leaps in the progress of computer and technology infrastructure applicable to medical imaging applications. This paper reviews the impact and potential benefits of two major trends in consumer market software development and how they will influence the future of medical imaging informatics. Open Source software is emerging as an attractive and cost effective alternative to traditional commercial software developments and collaborative social networks provide a new model of communication that is better suited to the needs of the medical community. Evidence shows that successful Open Source software tools have penetrated the medical market and have proven to be more robust and cost effective than their commercial counterparts. Developed by developers that are themselves part of the user community, these tools are usually better adapted to the user's need and are more robust than traditional software programs being developed and tested by a large number of contributing users. This context allows a much faster and more appropriate development and evolution of the software platforms. Similarly, communication technology has opened up to the general public in a way that has changed the social behavior and habits adding a new dimension to the way people communicate and interact with each other. The new paradigms have also slowly penetrated the professional market and ultimately the medical community. Secure social networks allowing groups of people to easily communicate and exchange information

Software development: do good manners matter?

Directory of Open Access Journals (Sweden)

Giuseppe Destefanis

2016-07-01

Full Text Available A successful software project is the result of a complex process involving, above all, people. Developers are the key factors for the success of a software development process, not merely as executors of tasks, but as protagonists and core of the whole development process. This paper investigates social aspects among developers working on software projects developed with the support of Agile tools. We studied 22 open-source software projects developed using the Agile board of the JIRA repository. All comments committed by developers involved in the projects were analyzed and we explored whether the politeness of comments affected the number of developers involved and the time required to fix any given issue. Our results showed that the level of politeness in the communication process among developers does have an effect on the time required to fix issues and, in the majority of the analysed projects, it had a positive correlation with attractiveness of the project to both active and potential developers. The more polite developers were, the less time it took to fix an issue.

Bug-Fixing and Code-Writing: The Private Provision of Open Source Software

DEFF Research Database (Denmark)

Bitzer, Jürgen; Schröder, Philipp

2002-01-01

Open source software (OSS) is a public good. A self-interested individual would consider providing such software, if the benefits he gained from having it justified the cost of programming. Nevertheless each agent is tempted to free ride and wait for others to develop the software instead...

A Stigmergy Collaboration Approach in the Open Source Software Developer Community

Energy Technology Data Exchange (ETDEWEB)

Cui, Xiaohui [ORNL; Pullum, Laura L [ORNL; Treadwell, Jim N [ORNL; Potok, Thomas E [ORNL

2009-01-01

The communication model of some self-organized online communities is significantly different from the traditional social network based community. It is problematic to use social network analysis to analyze the collaboration structure and emergent behaviors in these communities because these communities lack peer-to-peer connections. Stigmergy theory provides an explanation of the collaboration model of these communities. In this research, we present a stigmergy approach for building an agent-based simulation to simulate the collaboration model in the open source software (OSS) developer community. We used a group of actors who collaborate on OSS projects through forums as our frame of reference and investigated how the choices actors make in contributing their work on the projects determines the global status of the whole OSS project. In our simulation, the forum posts serve as the digital pheromone and the modified Pierre-Paul Grasse pheromone model is used for computing the developer agents behavior selection probability.

Muticriteria decision making model for chosing between open source and non-open source software

Directory of Open Access Journals (Sweden)

Edmilson Alves de Moraes

2008-09-01

Full Text Available This article proposes the use of a multicriterio method for supporting decision on a problem where the intent is to chose for software given the options of open source and not-open source. The study shows how a method for decison making can be used to provide problem structuration and simplify the decision maker job. The method Analytic Hierarchy Process-AHP is described step-by-step and its benefits and flaws are discussed. Followin the theoretical discussion, a muliple case study is presented, where two companies are to use the decison making method. The analysis was supported by Expert Choice, a software developed based on AHP framework.

ADAPTING OPEN-SOURCE SOFTWARE FOR ENTERPRISE

Directory of Open Access Journals (Sweden)

Bogdan MICU GHILIC

2013-06-01

Full Text Available Low developed companies do not use ERP solutions for resource management, they don't have CRM systems for tracking customers, online presence is low and consequently they are selling low volumes. Their work does not generate enough capital to buy specialized software and the local community is too small to create open-source software for them.When adapting an open-source enterprise solution, from a certain level of integration, it is necessary to align to the Romanian legislation. For this you need more than a simple translation. For example, in accounting, the Romanian chart of accounts should be used, the local fiscal calendar, the rules of the Romanian legislation and the specific identifiers for Romanian companies. The solution: Open source applications can be localized. A small community cannot create complex system starting from nothing, but they can adapt existing ones already created and used all over the world. Given the individual characteristics of the Romanian market, open source ERP, CM and e-commerce will be integrated by specialized consultancy agency in Romania just as is done in France (Compiere, Spain (Openbravo, Belgium (OpenERP or the United States (Apache oFBiz. This will not generate license costs for the companies, only the expenses for hardware and implementation consultancy. If we can create a common infrastructure, hardware cost will be waived for cloud SaaS offering, in opposition with the on-premise option.

Journal of Open Source Software (JOSS): design and first-year review

Science.gov (United States)

Smith, Arfon M.

2018-01-01

JOSS is a free and open-access journal that publishes articles describing research software across all disciplines. It has the dual goals of improving the quality of the software submitted and providing a mechanism for research software developers to receive credit. While designed to work within the current merit system of science, JOSS addresses the dearth of rewards for key contributions to science made in the form of software. JOSS publishes articles that encapsulate scholarship contained in the software itself, and its rigorous peer review targets the software components: functionality, documentation, tests, continuous integration, and the license. A JOSS article contains an abstract describing the purpose and functionality of the software, references, and a link to the software archive. JOSS published more than 100 articles in its first year, many from the scientific python ecosystem (including a number of articles related to astronomy and astrophysics). JOSS is a sponsored project of the nonprofit organization NumFOCUS and is an affiliate of the Open Source Initiative.In this presentation, I'll describes the motivation, design, and progress of the Journal of Open Source Software (JOSS) and how it compares to other avenues for publishing research software in astronomy.

Open Source Software Acquisition

DEFF Research Database (Denmark)

Holck, Jesper; Kühn Pedersen, Mogens; Holm Larsen, Michael

2005-01-01

Lately we have seen a growing interest from both public and private organisations to adopt OpenSource Software (OSS), not only for a few, specific applications but also on a more general levelthroughout the organisation. As a consequence, the organisations' decisions on adoption of OSS arebecoming...

Real-time software for multi-isotopic source term estimation

International Nuclear Information System (INIS)

Goloubenkov, A.; Borodin, R.; Sohier, A.

1996-01-01

Consideration is given to development of software for one of crucial components of the RODOS - assessment of the source rate (SR) from indirect measurements. Four components of the software are described in the paper. First component is a GRID system, which allow to prepare stochastic meteorological and radioactivity fields using measured data. Second part is a model of atmospheric transport which can be adapted for emulation of practically any gamma dose/spectrum detectors. The third one is a method which allows space-time and quantitative discrepancies in measured and modelled data to be taken into account simultaneously. It bases on the preference scheme selected by an expert. Last component is a special optimization method for calculation of multi-isotopic SR and its uncertainties. Results of a validation of the software using tracer experiments data and Chernobyl source estimation for main dose-forming isotopes are enclosed in the paper

Free software, Open source software, licenses. A short presentation including a procedure for research software and data dissemination

OpenAIRE

Gomez-Diaz , Teresa

2014-01-01

4 pages. Spanish version: Software libre, software de código abierto, licencias. Donde se propone un procedimiento de distribución de software y datos de investigación; The main goal of this document is to help the research community to understand the basic concepts of software distribution: Free software, Open source software, licenses. This document also includes a procedure for research software and data dissemination.

Rapid Open Source GPS software development for modern embedded systems:using the GPSTk with the Gumstix

OpenAIRE

Salazar Hernández, Dagoberto José; Hernández Pajares, Manuel; Juan Zornoza, José Miguel; Sanz Subirana, Jaume

2006-01-01

This work shows how the combination of GPS Open Source Software (GOSS) and advanced full function miniature computers (FFMC) allows rapid development, implementation and testing of advanced embedded GNSS data processing applications in a flexible way. In this regard, our tools of choice are the “GPS Toolkit” (GPSTk), and a modern, high power embedded platform such as the “Gumstix” computer boards. Peer Reviewed

Building Energy Management Open Source Software

Energy Technology Data Exchange (ETDEWEB)

2017-06-20

This is the repository for Building Energy Management Open Source Software (BEMOSS), which is an open source operating system that is engineered to improve sensing and control of equipment in small- and medium-sized commercial buildings. BEMOSS offers the following key features: (1) Open source, open architecture – BEMOSS is an open source operating system that is built upon VOLTTRON – a distributed agent platform developed by Pacific Northwest National Laboratory (PNNL). BEMOSS was designed to make it easy for hardware manufacturers to seamlessly interface their devices with BEMOSS. Software developers can also contribute to adding additional BEMOSS functionalities and applications. (2) Plug & play – BEMOSS was designed to automatically discover supported load controllers (including smart thermostats, VAV/RTUs, lighting load controllers and plug load controllers) in commercial buildings. (3) Interoperability – BEMOSS was designed to work with load control devices form different manufacturers that operate on different communication technologies and data exchange protocols. (4) Cost effectiveness – Implementation of BEMOSS deemed to be cost-effective as it was built upon a robust open source platform that can operate on a low-cost single-board computer, such as Odroid. This feature could contribute to its rapid deployment in small- or medium-sized commercial buildings. (5) Scalability and ease of deployment – With its multi-node architecture, BEMOSS provides a distributed architecture where load controllers in a multi-floor and high occupancy building could be monitored and controlled by multiple single-board computers hosting BEMOSS. This makes it possible for a building engineer to deploy BEMOSS in one zone of a building, be comfortable with its operation, and later on expand the deployment to the entire building to make it more energy efficient. (6) Ability to provide local and remote monitoring – BEMOSS provides both local and remote monitoring

Free and Open Source Software for Geospatial in the field of planetary science

Science.gov (United States)

Frigeri, A.

2012-12-01

Information technology applied to geospatial analyses has spread quickly in the last ten years. The availability of OpenData and data from collaborative mapping projects increased the interest on tools, procedures and methods to handle spatially-related information. Free Open Source Software projects devoted to geospatial data handling are gaining a good success as the use of interoperable formats and protocols allow the user to choose what pipeline of tools and libraries is needed to solve a particular task, adapting the software scene to his specific problem. In particular, the Free Open Source model of development mimics the scientific method very well, and researchers should be naturally encouraged to take part to the development process of these software projects, as this represent a very agile way to interact among several institutions. When it comes to planetary sciences, geospatial Free Open Source Software is gaining a key role in projects that commonly involve different subjects in an international scenario. Very popular software suites for processing scientific mission data (for example, ISIS) and for navigation/planning (SPICE) are being distributed along with the source code and the interaction between user and developer is often very strict, creating a continuum between these two figures. A very widely spread library for handling geospatial data (GDAL) has started to support planetary data from the Planetary Data System, and recent contributions enabled the support to other popular data formats used in planetary science, as the Vicar one. The use of Geographic Information System in planetary science is now diffused, and Free Open Source GIS, open GIS formats and network protocols allow to extend existing tools and methods developed to solve Earth based problems, also to the case of the study of solar system bodies. A day in the working life of a researcher using Free Open Source Software for geospatial will be presented, as well as benefits and

How Open Source Has Changed the Software Industry: Perspectives from Open Source Entrepreneurs

Directory of Open Access Journals (Sweden)

Risto Rajala

2012-01-01

Full Text Available The emergence of F/LOSS (free/libre open source software has triggered several changes in the software industry. F/LOSS has been cited as an archetypal form of open innovation; it consists of the convergence and collaboration of like-minded parties. An increasing number of software firms have taken upon this approach to link outsiders into their service development and product design. Also, software firms have been increasingly grounded their business models on user-centric and service-oriented operations. This article describes a study that investigates these changes from the perspective of F/LOSS entrepreneurs. The findings are summarized into four issues that are critical in managing an F/LOSS business: i dealing with organizational changes in the innovation process; ii mastering user involvement; iii successfully using resources; and iv designing revenue models.

Expanding Human Capabilities through the Adoption and Utilization of Free, Libre, and Open Source Software

Science.gov (United States)

Simpson, James Daniel

2014-01-01

Free, libre, and open source software (FLOSS) is software that is collaboratively developed. FLOSS provides end-users with the source code and the freedom to adapt or modify a piece of software to fit their needs (Deek & McHugh, 2008; Stallman, 2010). FLOSS has a 30 year history that dates to the open hacker community at the Massachusetts…

Beyond Open Source: Evaluating the Community Availability of Software

Directory of Open Access Journals (Sweden)

Bret Davidson

2016-01-01

Full Text Available The Code4Lib community has produced an increasingly impressive collection of open source software over the last decade, but much of this creative work remains out of reach for large portions of the library community. Do the relatively privileged institutions represented by a majority of Code4Lib participants have a professional responsibility to support the adoption of their innovations? Drawing from old and new software packaging and distribution approaches (from freeware to Docker, we propose extending the open source software values of collaboration and transparency to include the wide and affordable distribution of software. We believe this will not only simplify the process of sharing our applications within the library community, but also make it possible for less well-resourced institutions to actually use our software. We identify areas of need, present our experiences with the users of our own open source projects, discuss our attempts to go beyond open source, propose a preliminary set of technology availability performance indicators for evaluating software availability, and make an argument for the internal value of supporting and encouraging a vibrant library software ecosystem.

Simulation of neutron multiplicity measurements using Geant4. Open source software for nuclear arms control

Energy Technology Data Exchange (ETDEWEB)

Kuett, Moritz

2016-07-07

Nuclear arms control, including nuclear safeguards and verification technologies for nuclear disarmament typically use software as part of many different technological applications. This thesis proposes to use three open source criteria for such software, allowing users and developers to have free access to a program, have access to the full source code and be able to publish modifications for the program. This proposition is presented and analyzed in detail, together with the description of the development of ''Open Neutron Multiplicity Simulation'', an open source software tool to simulate neutron multiplicity measurements. The description includes physical background of the method, details of the developed program and a comprehensive set of validation calculations.

Software Tools for Development on the Peregrine System | High-Performance

Science.gov (United States)

Computing | NREL Software Tools for Development on the Peregrine System Software Tools for and manage software at the source code level. Cross-Platform Make and SCons The "Cross-Platform Make" (CMake) package is from Kitware, and SCons is a modern software build tool based on Python

Software engineering architecture-driven software development

CERN Document Server

Schmidt, Richard F

2013-01-01

Software Engineering: Architecture-driven Software Development is the first comprehensive guide to the underlying skills embodied in the IEEE's Software Engineering Body of Knowledge (SWEBOK) standard. Standards expert Richard Schmidt explains the traditional software engineering practices recognized for developing projects for government or corporate systems. Software engineering education often lacks standardization, with many institutions focusing on implementation rather than design as it impacts product architecture. Many graduates join the workforce with incomplete skil

Open-Source as a strategy for operational software - the case of Enki

Science.gov (United States)

Kolberg, Sjur; Bruland, Oddbjørn

2014-05-01

Since 2002, SINTEF Energy has been developing what is now known as the Enki modelling system. This development has been financed by Norway's largest hydropower producer Statkraft, motivated by a desire for distributed hydrological models in operational use. As the owner of the source code, Statkraft has recently decided on Open Source as a strategy for further development, and for migration from an R&D context to operational use. A current cooperation project is currently carried out between SINTEF Energy, 7 large Norwegian hydropower producers including Statkraft, three universities and one software company. Of course, the most immediate task is that of software maturing. A more important challenge, however, is one of gaining experience within the operational hydropower industry. A transition from lumped to distributed models is likely to also require revision of measurement program, calibration strategy, use of GIS and modern data sources like weather radar and satellite imagery. On the other hand, map based visualisations enable a richer information exchange between hydrologic forecasters and power market traders. The operating context of a distributed hydrology model within hydropower planning is far from settled. Being both a modelling framework and a library of plugin-routines to build models from, Enki supports the flexibility needed in this situation. Recent development has separated the core from the user interface, paving the way for a scripting API, cross-platform compilation, and front-end programs serving different degrees of flexibility, robustness and security. The open source strategy invites anyone to use Enki and to develop and contribute new modules. Once tested, the same modules are available for the operational versions of the program. A core challenge is to offer rigid testing procedures and mechanisms to reject routines in an operational setting, without limiting the experimentation with new modules. The Open Source strategy also has

Agile Software Development

Science.gov (United States)

Biju, Soly Mathew

2008-01-01

Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…

Developing open-source codes for electromagnetic geophysics using industry support

Science.gov (United States)

Key, K.

2017-12-01

Funding for open-source software development in academia often takes the form of grants and fellowships awarded by government bodies and foundations where there is no conflict-of-interest between the funding entity and the free dissemination of the open-source software products. Conversely, funding for open-source projects in the geophysics industry presents challenges to conventional business models where proprietary licensing offers value that is not present in open-source software. Such proprietary constraints make it easier to convince companies to fund academic software development under exclusive software distribution agreements. A major challenge for obtaining commercial funding for open-source projects is to offer a value proposition that overcomes the criticism that such funding is a give-away to the competition. This work draws upon a decade of experience developing open-source electromagnetic geophysics software for the oil, gas and minerals exploration industry, and examines various approaches that have been effective for sustaining industry sponsorship.

An Analysis of Open Source Security Software Products Downloads

Science.gov (United States)

Barta, Brian J.

2014-01-01

Despite the continued demand for open source security software, a gap in the identification of success factors related to the success of open source security software persists. There are no studies that accurately assess the extent of this persistent gap, particularly with respect to the strength of the relationships of open source software…

An architectural model for software reliability quantification: sources of data

International Nuclear Information System (INIS)

Smidts, C.; Sova, D.

1999-01-01

Software reliability assessment models in use today treat software as a monolithic block. An aversion towards 'atomic' models seems to exist. These models appear to add complexity to the modeling, to the data collection and seem intrinsically difficult to generalize. In 1997, we introduced an architecturally based software reliability model called FASRE. The model is based on an architecture derived from the requirements which captures both functional and nonfunctional requirements and on a generic classification of functions, attributes and failure modes. The model focuses on evaluation of failure mode probabilities and uses a Bayesian quantification framework. Failure mode probabilities of functions and attributes are propagated to the system level using fault trees. It can incorporate any type of prior information such as results of developers' testing, historical information on a specific functionality and its attributes, and, is ideally suited for reusable software. By building an architecture and deriving its potential failure modes, the model forces early appraisal and understanding of the weaknesses of the software, allows reliability analysis of the structure of the system, provides assessments at a functional level as well as at a systems' level. In order to quantify the probability of failure (or the probability of success) of a specific element of our architecture, data are needed. The term element of the architecture is used here in its broadest sense to mean a single failure mode or a higher level of abstraction such as a function. The paper surveys the potential sources of software reliability data available during software development. Next the mechanisms for incorporating these sources of relevant data to the FASRE model are identified

Benefits of reverse engineering technologies in software development makerspace

Directory of Open Access Journals (Sweden)

Aabidi M.H.

2017-01-01

Full Text Available In the recent decades, the amount of data produced by scientific, engineering, and life science applications has increased with several orders of magnitude. In parallel with this development, the applications themselves have become increasingly complex in terms of functionality, structure, and behavior. In the same time, development and production cycles of such applications exhibit a tendency of becoming increasingly shorter, due to factors such as market pressure and rapid evolution of supporting and enabling technologies. As a consequence, an increasing fraction of the cost of creating new applications and manufacturing processes shifts from the creation of new artifacts to the adaption of existing ones. A key component of this activity is the understanding of the design, operation, and behavior of existing manufactured artifacts, such as software code bases, hardware systems, and mechanical assemblies. For instance, in the software industry, it is estimated that maintenance costs exceed 80% of the total costs of a software product's lifecycle, and software understanding accounts for as much as half of these maintenance costs. To facilitate the software development process, it would be ideal to have tools that automatically generate or help to generate UML (Unified Modeling Language models from source code. Reverse engineering the software architecture from source code provides a valuable service to software practitioners. Case tools implementing MDA and reverse-engineering constitute an important opportunity of software development engineers. So MDA and reverse engineering is an important key witch make makerspace more productive and more efficient.

Clinical software development for the Web: lessons learned from the BOADICEA project.

Science.gov (United States)

Cunningham, Alex P; Antoniou, Antonis C; Easton, Douglas F

2012-04-10

In the past 20 years, society has witnessed the following landmark scientific advances: (i) the sequencing of the human genome, (ii) the distribution of software by the open source movement, and (iii) the invention of the World Wide Web. Together, these advances have provided a new impetus for clinical software development: developers now translate the products of human genomic research into clinical software tools; they use open-source programs to build them; and they use the Web to deliver them. Whilst this open-source component-based approach has undoubtedly made clinical software development easier, clinical software projects are still hampered by problems that traditionally accompany the software process. This study describes the development of the BOADICEA Web Application, a computer program used by clinical geneticists to assess risks to patients with a family history of breast and ovarian cancer. The key challenge of the BOADICEA Web Application project was to deliver a program that was safe, secure and easy for healthcare professionals to use. We focus on the software process, problems faced, and lessons learned. Our key objectives are: (i) to highlight key clinical software development issues; (ii) to demonstrate how software engineering tools and techniques can facilitate clinical software development for the benefit of individuals who lack software engineering expertise; and (iii) to provide a clinical software development case report that can be used as a basis for discussion at the start of future projects. We developed the BOADICEA Web Application using an evolutionary software process. Our approach to Web implementation was conservative and we used conventional software engineering tools and techniques. The principal software development activities were: requirements, design, implementation, testing, documentation and maintenance. The BOADICEA Web Application has now been widely adopted by clinical geneticists and researchers. BOADICEA Web

Sustainability in Open Source Software Commons: Lessons Learned from an Empirical Study of SourceForge Projects

Directory of Open Access Journals (Sweden)

Charles M. Schweik

2013-01-01

Full Text Available In this article, we summarize a five-year US National Science Foundation funded study designed to investigate the factors that lead some open source projects to ongoing collaborative success while many others become abandoned. Our primary interest was to conduct a study that was closely representative of the population of open source software projects in the world, rather than focus on the more-often studied, high-profile successful cases. After building a large database of projects (n=174,333 and implementing a major survey of open source developers (n=1403, we were able to conduct statistical analyses to investigate over forty theoretically-based testable hypotheses. Our data firmly support what we call the conventional theory of open source software, showing that projects start small, and, in successful cases, grow slightly larger in terms of team size. We describe the “virtuous circle” supporting conventional wisdom of open source collaboration that comes out of this analysis, and we discuss two other interesting findings related to developer motivations and how team members find each other. Each of these findings is related to the sustainability of these projects.

Open source EMR software: profiling, insights and hands-on analysis.

Science.gov (United States)

Kiah, M L M; Haiqi, Ahmed; Zaidan, B B; Zaidan, A A

2014-11-01

The use of open source software in health informatics is increasingly advocated by authors in the literature. Although there is no clear evidence of the superiority of the current open source applications in the healthcare field, the number of available open source applications online is growing and they are gaining greater prominence. This repertoire of open source options is of a great value for any future-planner interested in adopting an electronic medical/health record system, whether selecting an existent application or building a new one. The following questions arise. How do the available open source options compare to each other with respect to functionality, usability and security? Can an implementer of an open source application find sufficient support both as a user and as a developer, and to what extent? Does the available literature provide adequate answers to such questions? This review attempts to shed some light on these aspects. The objective of this study is to provide more comprehensive guidance from an implementer perspective toward the available alternatives of open source healthcare software, particularly in the field of electronic medical/health records. The design of this study is twofold. In the first part, we profile the published literature on a sample of existent and active open source software in the healthcare area. The purpose of this part is to provide a summary of the available guides and studies relative to the sampled systems, and to identify any gaps in the published literature with respect to our research questions. In the second part, we investigate those alternative systems relative to a set of metrics, by actually installing the software and reporting a hands-on experience of the installation process, usability, as well as other factors. The literature covers many aspects of open source software implementation and utilization in healthcare practice. Roughly, those aspects could be distilled into a basic taxonomy, making the

Guidance and Control Software Project Data - Volume 2: Development Documents

Science.gov (United States)

Hayhurst, Kelly J. (Editor)

2008-01-01

The Guidance and Control Software (GCS) project was the last in a series of software reliability studies conducted at Langley Research Center between 1977 and 1994. The technical results of the GCS project were recorded after the experiment was completed. Some of the support documentation produced as part of the experiment, however, is serving an unexpected role far beyond its original project context. Some of the software used as part of the GCS project was developed to conform to the RTCA/DO-178B software standard, "Software Considerations in Airborne Systems and Equipment Certification," used in the civil aviation industry. That standard requires extensive documentation throughout the software development life cycle, including plans, software requirements, design and source code, verification cases and results, and configuration management and quality control data. The project documentation that includes this information is open for public scrutiny without the legal or safety implications associated with comparable data from an avionics manufacturer. This public availability has afforded an opportunity to use the GCS project documents for DO-178B training. This report provides a brief overview of the GCS project, describes the 4-volume set of documents and the role they are playing in training, and includes the development documents from the GCS project. Volume 2 contains three appendices: A. Guidance and Control Software Development Specification; B. Design Description for the Pluto Implementation of the Guidance and Control Software; and C. Source Code for the Pluto Implementation of the Guidance and Control Software

A Padawan Programmer's Guide to Developing Software Libraries

DEFF Research Database (Denmark)

Yurkovich, James T.; Yurkovich, Benjamin J.; Dräger, Andreas

2017-01-01

/Shiny, that make it easier to develop scientific software and by open-source licenses that make it easier to release software. But how do you build a software library that people will use? And what characteristics do the best libraries have that make them enduringly popular? Here, we provide a reference guide......With the rapid adoption of computational tools in the life sciences, scientists are taking on the challenge of developing their own software libraries and releasing them for public use. This trend is being accelerated by popular technologies and platforms, such as GitHub, Jupyter, R......, based on our own experiences, for developing software libraries along with real-world examples to help provide context for scientists who are learning about these concepts for the first time. While we can only scratch the surface of these topics, we hope that this article will act as a guide...

Clinical software development for the Web: lessons learned from the BOADICEA project

OpenAIRE

Cunningham, Alex P; Antoniou, Antonis C; Easton, Douglas F

2012-01-01

Abstract Background In the past 20 years, society has witnessed the following landmark scientific advances: (i) the sequencing of the human genome, (ii) the distribution of software by the open source movement, and (iii) the invention of the World Wide Web. Together, these advances have provided a new impetus for clinical software development: developers now translate the products of human genomic research into clinical software tools; they use open-source programs to build them; and they use...

An Organizational-Technical Concept to Deal with Open Source Software License Terms

Directory of Open Access Journals (Sweden)

Sergius Dyck

2016-06-01

Full Text Available Open source software (OSS released under various license terms is widely used as third party libraries in today's software projects. To ensure open source compliance within an organization, a strategic approach to OSS management is needed. As basis for such an approach, we introduce an organizational-technical concept for dealing with the various OSS licenses by using procedural instructions and build automation software. The concept includes the careful consideration of OSS license conditions. The results obtained from this consideration and additional necessary commitments are documented in a so-called license playbook. We introduce procedure instructions enabling a consistent approach for software development using OSS libraries. The procedure instructions are described in a way such that they can be implemented for example for Java projects using the popular build automation tool Apache Maven and the software repository tool Nexus. We give guidance on how to realize such an implementation on basis of automation tools in practice.

FieldTrip: Open source software for advanced analysis of MEG, EEG, and invasive electrophysiological data.

Science.gov (United States)

Oostenveld, Robert; Fries, Pascal; Maris, Eric; Schoffelen, Jan-Mathijs

2011-01-01

This paper describes FieldTrip, an open source software package that we developed for the analysis of MEG, EEG, and other electrophysiological data. The software is implemented as a MATLAB toolbox and includes a complete set of consistent and user-friendly high-level functions that allow experimental neuroscientists to analyze experimental data. It includes algorithms for simple and advanced analysis, such as time-frequency analysis using multitapers, source reconstruction using dipoles, distributed sources and beamformers, connectivity analysis, and nonparametric statistical permutation tests at the channel and source level. The implementation as toolbox allows the user to perform elaborate and structured analyses of large data sets using the MATLAB command line and batch scripting. Furthermore, users and developers can easily extend the functionality and implement new algorithms. The modular design facilitates the reuse in other software packages.

Development and validation of open-source software for DNA mixture interpretation based on a quantitative continuous model.

Science.gov (United States)

Manabe, Sho; Morimoto, Chie; Hamano, Yuya; Fujimoto, Shuntaro; Tamaki, Keiji

2017-01-01

In criminal investigations, forensic scientists need to evaluate DNA mixtures. The estimation of the number of contributors and evaluation of the contribution of a person of interest (POI) from these samples are challenging. In this study, we developed a new open-source software "Kongoh" for interpreting DNA mixture based on a quantitative continuous model. The model uses quantitative information of peak heights in the DNA profile and considers the effect of artifacts and allelic drop-out. By using this software, the likelihoods of 1-4 persons' contributions are calculated, and the most optimal number of contributors is automatically determined; this differs from other open-source software. Therefore, we can eliminate the need to manually determine the number of contributors before the analysis. Kongoh also considers allele- or locus-specific effects of biological parameters based on the experimental data. We then validated Kongoh by calculating the likelihood ratio (LR) of a POI's contribution in true contributors and non-contributors by using 2-4 person mixtures analyzed through a 15 short tandem repeat typing system. Most LR values obtained from Kongoh during true-contributor testing strongly supported the POI's contribution even for small amounts or degraded DNA samples. Kongoh correctly rejected a false hypothesis in the non-contributor testing, generated reproducible LR values, and demonstrated higher accuracy of the estimated number of contributors than another software based on the quantitative continuous model. Therefore, Kongoh is useful in accurately interpreting DNA evidence like mixtures and small amounts or degraded DNA samples.

Development and validation of open-source software for DNA mixture interpretation based on a quantitative continuous model.

Directory of Open Access Journals (Sweden)

Sho Manabe

Full Text Available In criminal investigations, forensic scientists need to evaluate DNA mixtures. The estimation of the number of contributors and evaluation of the contribution of a person of interest (POI from these samples are challenging. In this study, we developed a new open-source software "Kongoh" for interpreting DNA mixture based on a quantitative continuous model. The model uses quantitative information of peak heights in the DNA profile and considers the effect of artifacts and allelic drop-out. By using this software, the likelihoods of 1-4 persons' contributions are calculated, and the most optimal number of contributors is automatically determined; this differs from other open-source software. Therefore, we can eliminate the need to manually determine the number of contributors before the analysis. Kongoh also considers allele- or locus-specific effects of biological parameters based on the experimental data. We then validated Kongoh by calculating the likelihood ratio (LR of a POI's contribution in true contributors and non-contributors by using 2-4 person mixtures analyzed through a 15 short tandem repeat typing system. Most LR values obtained from Kongoh during true-contributor testing strongly supported the POI's contribution even for small amounts or degraded DNA samples. Kongoh correctly rejected a false hypothesis in the non-contributor testing, generated reproducible LR values, and demonstrated higher accuracy of the estimated number of contributors than another software based on the quantitative continuous model. Therefore, Kongoh is useful in accurately interpreting DNA evidence like mixtures and small amounts or degraded DNA samples.

WILDFIRE IGNITION RESISTANCE ESTIMATOR WIZARD SOFTWARE DEVELOPMENT REPORT

Energy Technology Data Exchange (ETDEWEB)

Phillips, M.; Robinson, C.; Gupta, N.; Werth, D.

2012-10-10

This report describes the development of a software tool, entitled “WildFire Ignition Resistance Estimator Wizard” (WildFIRE Wizard, Version 2.10). This software was developed within the Wildfire Ignition Resistant Home Design (WIRHD) program, sponsored by the U. S. Department of Homeland Security, Science and Technology Directorate, Infrastructure Protection & Disaster Management Division. WildFIRE Wizard is a tool that enables homeowners to take preventive actions that will reduce their home’s vulnerability to wildfire ignition sources (i.e., embers, radiant heat, and direct flame impingement) well in advance of a wildfire event. This report describes the development of the software, its operation, its technical basis and calculations, and steps taken to verify its performance.

Note: Tormenta: An open source Python-powered control software for camera based optical microscopy.

Science.gov (United States)

Barabas, Federico M; Masullo, Luciano A; Stefani, Fernando D

2016-12-01

Until recently, PC control and synchronization of scientific instruments was only possible through closed-source expensive frameworks like National Instruments' LabVIEW. Nowadays, efficient cost-free alternatives are available in the context of a continuously growing community of open-source software developers. Here, we report on Tormenta, a modular open-source software for the control of camera-based optical microscopes. Tormenta is built on Python, works on multiple operating systems, and includes some key features for fluorescence nanoscopy based on single molecule localization.

Final Report. Center for Scalable Application Development Software

Energy Technology Data Exchange (ETDEWEB)

Mellor-Crummey, John [Rice Univ., Houston, TX (United States)

2014-10-26

The Center for Scalable Application Development Software (CScADS) was established as a part- nership between Rice University, Argonne National Laboratory, University of California Berkeley, University of Tennessee – Knoxville, and University of Wisconsin – Madison. CScADS pursued an integrated set of activities with the aim of increasing the productivity of DOE computational scientists by catalyzing the development of systems software, libraries, compilers, and tools for leadership computing platforms. Principal Center activities were workshops to engage the research community in the challenges of leadership computing, research and development of open-source software, and work with computational scientists to help them develop codes for leadership computing platforms. This final report summarizes CScADS activities at Rice University in these areas.

Open source IPSEC software in manned and unmanned space missions

Science.gov (United States)

Edwards, Jacob

Network security is a major topic of research because cyber attackers pose a threat to national security. Securing ground-space communications for NASA missions is important because attackers could endanger mission success and human lives. This thesis describes how an open source IPsec software package was used to create a secure and reliable channel for ground-space communications. A cost efficient, reproducible hardware testbed was also created to simulate ground-space communications. The testbed enables simulation of low-bandwidth and high latency communications links to experiment how the open source IPsec software reacts to these network constraints. Test cases were built that allowed for validation of the testbed and the open source IPsec software. The test cases also simulate using an IPsec connection from mission control ground routers to points of interest in outer space. Tested open source IPsec software did not meet all the requirements. Software changes were suggested to meet requirements.

Biogem: an effective tool based approach for scaling up open source software development in bioinformatics

NARCIS (Netherlands)

Bonnal, R.J.P.; Smant, G.; Prins, J.C.P.

2012-01-01

Biogem provides a software development environment for the Ruby programming language, which encourages community-based software development for bioinformatics while lowering the barrier to entry and encouraging best practices. Biogem, with its targeted modular and decentralized approach, software

Integrating open-source software applications to build molecular dynamics systems.

Science.gov (United States)

Allen, Bruce M; Predecki, Paul K; Kumosa, Maciej

2014-04-05

Three open-source applications, NanoEngineer-1, packmol, and mis2lmp are integrated using an open-source file format to quickly create molecular dynamics (MD) cells for simulation. The three software applications collectively make up the open-source software (OSS) suite known as MD Studio (MDS). The software is validated through software engineering practices and is verified through simulation of the diglycidyl ether of bisphenol-a and isophorone diamine (DGEBA/IPD) system. Multiple simulations are run using the MDS software to create MD cells, and the data generated are used to calculate density, bulk modulus, and glass transition temperature of the DGEBA/IPD system. Simulation results compare well with published experimental and numerical results. The MDS software prototype confirms that OSS applications can be analyzed against real-world research requirements and integrated to create a new capability. Copyright © 2014 Wiley Periodicals, Inc.

Instrumentino: An Open-Source Software for Scientific Instruments

OpenAIRE

Koenka, Israel Joel; Sáiz, Jorge; Hauser, Peter C.

2015-01-01

Scientists often need to build dedicated computer-controlled experimental systems. For this purpose, it is becoming common to employ open-source microcontroller platforms, such as the Arduino. These boards and associated integrated software development environments provide affordable yet powerful solutions for the implementation of hardware control of transducers and acquisition of signals from detectors and sensors. It is, however, a challenge to write programs that allow interactive use of ...

Automated Source Code Analysis to Identify and Remove Software Security Vulnerabilities: Case Studies on Java Programs

OpenAIRE

Natarajan Meghanathan

2013-01-01

The high-level contribution of this paper is to illustrate the development of generic solution strategies to remove software security vulnerabilities that could be identified using automated tools for source code analysis on software programs (developed in Java). We use the Source Code Analyzer and Audit Workbench automated tools, developed by HP Fortify Inc., for our testing purposes. We present case studies involving a file writer program embedded with features for password validation, and ...

Open Source Software and Design-Based Research Symbiosis in Developing 3D Virtual Learning Environments: Examples from the iSocial Project

Science.gov (United States)

Schmidt, Matthew; Galyen, Krista; Laffey, James; Babiuch, Ryan; Schmidt, Carla

2014-01-01

Design-based research (DBR) and open source software are both acknowledged as potentially productive ways for advancing learning technologies. These approaches have practical benefits for the design and development process and for building and leveraging community to augment and sustain design and development. This report presents a case study of…

Software project management tools in global software development: a systematic mapping study.

Science.gov (United States)

Chadli, Saad Yasser; Idri, Ali; Ros, Joaquín Nicolás; Fernández-Alemán, José Luis; de Gea, Juan M Carrillo; Toval, Ambrosio

2016-01-01

Global software development (GSD) which is a growing trend in the software industry is characterized by a highly distributed environment. Performing software project management (SPM) in such conditions implies the need to overcome new limitations resulting from cultural, temporal and geographic separation. The aim of this research is to discover and classify the various tools mentioned in literature that provide GSD project managers with support and to identify in what way they support group interaction. A systematic mapping study has been performed by means of automatic searches in five sources. We have then synthesized the data extracted and presented the results of this study. A total of 102 tools were identified as being used in SPM activities in GSD. We have classified these tools, according to the software life cycle process on which they focus and how they support the 3C collaboration model (communication, coordination and cooperation). The majority of the tools found are standalone tools (77%). A small number of platforms (8%) also offer a set of interacting tools that cover the software development lifecycle. Results also indicate that SPM areas in GSD are not adequately supported by corresponding tools and deserve more attention from tool builders.

A Padawan Programmer's Guide to Developing Software Libraries.

Science.gov (United States)

Yurkovich, James T; Yurkovich, Benjamin J; Dräger, Andreas; Palsson, Bernhard O; King, Zachary A

2017-11-22

With the rapid adoption of computational tools in the life sciences, scientists are taking on the challenge of developing their own software libraries and releasing them for public use. This trend is being accelerated by popular technologies and platforms, such as GitHub, Jupyter, R/Shiny, that make it easier to develop scientific software and by open-source licenses that make it easier to release software. But how do you build a software library that people will use? And what characteristics do the best libraries have that make them enduringly popular? Here, we provide a reference guide, based on our own experiences, for developing software libraries along with real-world examples to help provide context for scientists who are learning about these concepts for the first time. While we can only scratch the surface of these topics, we hope that this article will act as a guide for scientists who want to write great software that is built to last. Copyright © 2017 Elsevier Inc. All rights reserved.

The Systems Biology Research Tool: evolvable open-source software

Directory of Open Access Journals (Sweden)

Wright Jeremiah

2008-06-01

Full Text Available Abstract Background Research in the field of systems biology requires software for a variety of purposes. Software must be used to store, retrieve, analyze, and sometimes even to collect the data obtained from system-level (often high-throughput experiments. Software must also be used to implement mathematical models and algorithms required for simulation and theoretical predictions on the system-level. Results We introduce a free, easy-to-use, open-source, integrated software platform called the Systems Biology Research Tool (SBRT to facilitate the computational aspects of systems biology. The SBRT currently performs 35 methods for analyzing stoichiometric networks and 16 methods from fields such as graph theory, geometry, algebra, and combinatorics. New computational techniques can be added to the SBRT via process plug-ins, providing a high degree of evolvability and a unifying framework for software development in systems biology. Conclusion The Systems Biology Research Tool represents a technological advance for systems biology. This software can be used to make sophisticated computational techniques accessible to everyone (including those with no programming ability, to facilitate cooperation among researchers, and to expedite progress in the field of systems biology.

Adoption of open source digital library software packages: a survey

OpenAIRE

Jose, Sanjo

2007-01-01

Open source digital library packages are gaining popularity nowadays. To build a digital library under economical conditions open source software is preferable. This paper tries to identify the extent of adoption of open source digital library software packages in various organizations through an online survey. It lays down the findings from the survey.

Contrasting Proprietary and Free/Open Source Game Development

Directory of Open Access Journals (Sweden)

Marco Zamarian

2008-10-01

Full Text Available Free/Libre Open Source Software (F/LOSS development practices are gaining momentum in the computer game industry. This traditionally proprietary industry is becoming more interested in the F/LOSS paradigm for developing complex software projects. Software practitioners, both managers and developers, need to understand the potential in order to benefit properly from incorporating F/LOSS practices into their proprietary production cycle. Comparisons between proprietary and F/LOSS software development processes are usually characterized in terms of the relationship between property rights, revenue distribution and power within a network of actors. By contrast, coordination and control practices, mediating artifacts and development tools, and the interactions between the different actors involved in the development are often neglected. Proprietary and F/LOSS development differ in terms of the knowledge exchanges between the relevant actors and the different strategies employed to overcome information asymmetries. Recognizing this difference is an essential step for evaluating how proprietary, closed-source software houses can benefit by integrating various F/LOSS practices into their development agenda.

Open Source Seismic Software in NOAA's Next Generation Tsunami Warning System

Science.gov (United States)

Hellman, S. B.; Baker, B. I.; Hagerty, M. T.; Leifer, J. M.; Lisowski, S.; Thies, D. A.; Donnelly, B. K.; Griffith, F. P.

2014-12-01

The Tsunami Information technology Modernization (TIM) is a project spearheaded by National Oceanic and Atmospheric Administration to update the United States' Tsunami Warning System software currently employed at the Pacific Tsunami Warning Center (Eva Beach, Hawaii) and the National Tsunami Warning Center (Palmer, Alaska). This entirely open source software project will integrate various seismic processing utilities with the National Weather Service Weather Forecast Office's core software, AWIPS2. For the real-time and near real-time seismic processing aspect of this project, NOAA has elected to integrate the open source portions of GFZ's SeisComP 3 (SC3) processing system into AWIPS2. To provide for better tsunami threat assessments we are developing open source tools for magnitude estimations (e.g., moment magnitude, energy magnitude, surface wave magnitude), detection of slow earthquakes with the Theta discriminant, moment tensor inversions (e.g. W-phase and teleseismic body waves), finite fault inversions, and array processing. With our reliance on common data formats such as QuakeML and seismic community standard messaging systems, all new facilities introduced into AWIPS2 and SC3 will be available as stand-alone tools or could be easily integrated into other real time seismic monitoring systems such as Earthworm, Antelope, etc. Additionally, we have developed a template based design paradigm so that the developer or scientist can efficiently create upgrades, replacements, and/or new metrics to the seismic data processing with only a cursory knowledge of the underlying SC3.

Developing Software Simulations

Directory of Open Access Journals (Sweden)

Tom Hall

2007-06-01

Full Text Available Programs in education and business often require learners to develop and demonstrate competence in specified areas and then be able to effectively apply this knowledge. One method to aid in developing a skill set in these areas is through the use of software simulations. These simulations can be used for learner demonstrations of competencies in a specified course as well as a review of the basic skills at the beginning of subsequent courses. The first section of this paper discusses ToolBook, the software used to develop our software simulations. The second section discusses the process of developing software simulations. The third part discusses how we have used software simulations to assess student knowledge of research design by providing simulations that allow the student to practice using SPSS and Excel.

Testing Software Development Project Productivity Model

Science.gov (United States)

Lipkin, Ilya

Software development is an increasingly influential factor in today's business environment, and a major issue affecting software development is how an organization estimates projects. If the organization underestimates cost, schedule, and quality requirements, the end results will not meet customer needs. On the other hand, if the organization overestimates these criteria, resources that could have been used more profitably will be wasted. There is no accurate model or measure available that can guide an organization in a quest for software development, with existing estimation models often underestimating software development efforts as much as 500 to 600 percent. To address this issue, existing models usually are calibrated using local data with a small sample size, with resulting estimates not offering improved cost analysis. This study presents a conceptual model for accurately estimating software development, based on an extensive literature review and theoretical analysis based on Sociotechnical Systems (STS) theory. The conceptual model serves as a solution to bridge organizational and technological factors and is validated using an empirical dataset provided by the DoD. Practical implications of this study allow for practitioners to concentrate on specific constructs of interest that provide the best value for the least amount of time. This study outlines key contributing constructs that are unique for Software Size E-SLOC, Man-hours Spent, and Quality of the Product, those constructs having the largest contribution to project productivity. This study discusses customer characteristics and provides a framework for a simplified project analysis for source selection evaluation and audit task reviews for the customers and suppliers. Theoretical contributions of this study provide an initial theory-based hypothesized project productivity model that can be used as a generic overall model across several application domains such as IT, Command and Control

Web-based spatial analysis with the ILWIS open source GIS software and satellite images from GEONETCast

Science.gov (United States)

Lemmens, R.; Maathuis, B.; Mannaerts, C.; Foerster, T.; Schaeffer, B.; Wytzisk, A.

2009-12-01

This paper involves easy accessible integrated web-based analysis of satellite images with a plug-in based open source software. The paper is targeted to both users and developers of geospatial software. Guided by a use case scenario, we describe the ILWIS software and its toolbox to access satellite images through the GEONETCast broadcasting system. The last two decades have shown a major shift from stand-alone software systems to networked ones, often client/server applications using distributed geo-(web-)services. This allows organisations to combine without much effort their own data with remotely available data and processing functionality. Key to this integrated spatial data analysis is a low-cost access to data from within a user-friendly and flexible software. Web-based open source software solutions are more often a powerful option for developing countries. The Integrated Land and Water Information System (ILWIS) is a PC-based GIS & Remote Sensing software, comprising a complete package of image processing, spatial analysis and digital mapping and was developed as commercial software from the early nineties onwards. Recent project efforts have migrated ILWIS into a modular, plug-in-based open source software, and provide web-service support for OGC-based web mapping and processing. The core objective of the ILWIS Open source project is to provide a maintainable framework for researchers and software developers to implement training components, scientific toolboxes and (web-) services. The latest plug-ins have been developed for multi-criteria decision making, water resources analysis and spatial statistics analysis. The development of this framework is done since 2007 in the context of 52°North, which is an open initiative that advances the development of cutting edge open source geospatial software, using the GPL license. GEONETCast, as part of the emerging Global Earth Observation System of Systems (GEOSS), puts essential environmental data at the

Entrepreneurial model based technology creative industries sector software through the use of free open source software for Universitas Pendidikan Indonesia students

Science.gov (United States)

Hasan, B.; Hasbullah; Purnama, W.; Hery, A.

2016-04-01

Creative industry development areas of software by using Free Open Source Software (FOSS) is expected to be one of the solutions to foster new entrepreneurs of the students who can open job opportunities and contribute to economic development in Indonesia. This study aims to create entrepreneurial coaching model based on the creative industries by utilizing FOSS software field as well as provide understanding and fostering entrepreneurial creative industries based field software for students of Universitas Pendidikan Indonesia. This activity phase begins with identifying entrepreneurs or business software technology that will be developed, training and mentoring, apprenticeship process at industrial partners, creation of business plans and monitoring and evaluation. This activity involves 30 UPI student which has the motivation to self-employment and have competence in the field of information technology. The results and outcomes expected from these activities is the birth of a number of new entrepreneurs from the students engaged in the software industry both software in the world of commerce (e-commerce) and education/learning (e-learning/LMS) and games.

Math Description Engine Software Development Kit

Science.gov (United States)

Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

2010-01-01

The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

Space Flight Software Development Software for Intelligent System Health Management

Science.gov (United States)

Trevino, Luis C.; Crumbley, Tim

2004-01-01

The slide presentation examines the Marshall Space Flight Center Flight Software Branch, including software development projects, mission critical space flight software development, software technical insight, advanced software development technologies, and continuous improvement in the software development processes and methods.

Beyond the Business Model: Incentives for Organizations to Publish Software Source Code

Science.gov (United States)

Lindman, Juho; Juutilainen, Juha-Pekka; Rossi, Matti

The software stack opened under Open Source Software (OSS) licenses is growing rapidly. Commercial actors have released considerable amounts of previously proprietary source code. These actions beg the question why companies choose a strategy based on giving away software assets? Research on outbound OSS approach has tried to answer this question with the concept of the “OSS business model”. When studying the reasons for code release, we have observed that the business model concept is too generic to capture the many incentives organizations have. Conversely, in this paper we investigate empirically what the companies’ incentives are by means of an exploratory case study of three organizations in different stages of their code release. Our results indicate that the companies aim to promote standardization, obtain development resources, gain cost savings, improve the quality of software, increase the trustworthiness of software, or steer OSS communities. We conclude that future research on outbound OSS could benefit from focusing on the heterogeneous incentives for code release rather than on revenue models.

Gammasphere software development

International Nuclear Information System (INIS)

Piercey, R.B.

1994-01-01

This report describes the activities of the nuclear physics group at Mississippi State University which were performed during 1993. Significant progress has been made in the focus areas: chairing the Gammasphere Software Working Group (SWG); assisting with the porting and enhancement of the ORNL UPAK histogramming software package; and developing standard formats for Gammasphere data products. In addition, they have established a new public ftp archive to distribute software and software development tools and information

The SCEC/UseIT Intern Program: Creating Open-Source Visualization Software Using Diverse Resources

Science.gov (United States)

Francoeur, H.; Callaghan, S.; Perry, S.; Jordan, T.

2004-12-01

The Southern California Earthquake Center undergraduate IT intern program (SCEC UseIT) conducts IT research to benefit collaborative earth science research. Through this program, interns have developed real-time, interactive, 3D visualization software using open-source tools. Dubbed LA3D, a distribution of this software is now in use by the seismic community. LA3D enables the user to interactively view Southern California datasets and models of importance to earthquake scientists, such as faults, earthquakes, fault blocks, digital elevation models, and seismic hazard maps. LA3D is now being extended to support visualizations anywhere on the planet. The new software, called SCEC-VIDEO (Virtual Interactive Display of Earth Objects), makes use of a modular, plugin-based software architecture which supports easy development and integration of new data sets. Currently SCEC-VIDEO is in beta testing, with a full open-source release slated for the future. Both LA3D and SCEC-VIDEO were developed using a wide variety of software technologies. These, which included relational databases, web services, software management technologies, and 3-D graphics in Java, were necessary to integrate the heterogeneous array of data sources which comprise our software. Currently the interns are working to integrate new technologies and larger data sets to increase software functionality and value. In addition, both LA3D and SCEC-VIDEO allow the user to script and create movies. Thus program interns with computer science backgrounds have been writing software while interns with other interests, such as cinema, geology, and education, have been making movies that have proved of great use in scientific talks, media interviews, and education. Thus, SCEC UseIT incorporates a wide variety of scientific and human resources to create products of value to the scientific and outreach communities. The program plans to continue with its interdisciplinary approach, increasing the relevance of the

The potential role of open source software in overcoming digital poverty

CSIR Research Space (South Africa)

Kinyondo, J

2012-09-01

Full Text Available Developing countries, such as Tanzania, are characterized by digital poverty and a lack of information and communication technology (ICT) acceptance. The use of open source software (OSS) has been proposed as a potential strategy for addressing ICT...

Gammasphere software development

International Nuclear Information System (INIS)

Piercey, R.B.

1993-01-01

Activities of the nuclear physics group are described. Progress was made in organizing the Gammasphere Software Working Group, establishing a nuclear computing facility, participating in software development at Lawrence Berkeley, developing a common data file format, and adapting the ORNL UPAK software to run at Gammasphere. A universal histogram object was developed that defines a file format and provides for an objective-oriented programming model. An automated liquid nitrogen fill system was developed for Gammasphere (110 Ge detectors comprise the sphere)

Improving Software Developer's Competence

DEFF Research Database (Denmark)

Abrahamsson, Pekka; Kautz, Karlheinz; Sieppi, Heikki

2002-01-01

Emerging agile software development methods are people oriented development approaches to be used by the software industry. The personal software process (PSP) is an accepted method for improving the capabilities of a single software engineer. Five original hypotheses regarding the impact...

Open source projects as incubators of innovation: From niche phenomenon to integral part of the software industry

OpenAIRE

Schrape, Jan-Felix

2017-01-01

Over the last 20 years, open source development has become an integral part of the software industry and a key component of the innovation strategies of all major IT providers. Against this backdrop, this paper seeks to develop a systematic overview of open source communities and their socio-economic contexts. I begin with a reconstruction of the genesis of open source software projects and their changing relation- ships to established IT companies. This is followed by the identification of f...

Package-based software development

NARCIS (Netherlands)

Jonge, de M.; Chroust, G.; Hofer, C.

2003-01-01

The main goal of component-based software engineering is to decrease development time and development costs of software systems, by reusing prefabricated building blocks. Here we focus on software reuse within the implementation of such component-based applications, and on the corresponding software

Software architecture considerations for ion source control systems

International Nuclear Information System (INIS)

Sinclair, J.W.

1997-09-01

General characteristics of distributed control system software tools are examined from the perspective of ion source control system requirements. Emphasis is placed on strategies for building extensible, distributed systems in which the ion source element is one component of a larger system. Vsystem, a commercial software tool kit from Vista Control Systems was utilized extensively in the control system upgrade of the Holifield Radioactive Ion Beam Facility. Part of the control system is described and the characteristics of Vsystem are examined and compared with those of EPICS, the Experimental Physics and Industrial Control System

Open source software migration: Best practices

CSIR Research Space (South Africa)

Molefe, Onkgopotse M

2010-09-01

Full Text Available Open source software (OSS) has gained prominence worldwide, largely due to cost savings and security considerations. This has caused a change in the IT sector and has led to the migration of desktops from proprietary to OSS. The problem...

Systematic Software Development

DEFF Research Database (Denmark)

Kuhrmann, Marco; Méndez Fernández, Daniel

2015-01-01

The speed of innovation and the global allocation of resources to accelerate development or to reduce cost put pressure on the software industry. In the global competition, especially so-called high-price countries have to present arguments why the higher development cost is justified and what...... makes these countries an attractive host for software companies. Often, high-quality engineering and excellent quality of products, e.g., machinery and equipment, are mentioned. Yet, the question is: Can such arguments be also found for the software industry? We aim at investigating the degree...... of professionalism and systematization of software development to draw a map of strengths and weaknesses. To this end, we conducted as a first step an exploratory survey in Germany, presented in this paper. In this survey, we focused on the perceived importance of the two general software engineering process areas...

Development and Evaluation of an Open-Source Software Package “CGITA” for Quantifying Tumor Heterogeneity with Molecular Images

Directory of Open Access Journals (Sweden)

Yu-Hua Dean Fang

2014-01-01

Full Text Available Background. The quantification of tumor heterogeneity with molecular images, by analyzing the local or global variation in the spatial arrangements of pixel intensity with texture analysis, possesses a great clinical potential for treatment planning and prognosis. To address the lack of available software for computing the tumor heterogeneity on the public domain, we develop a software package, namely, Chang-Gung Image Texture Analysis (CGITA toolbox, and provide it to the research community as a free, open-source project. Methods. With a user-friendly graphical interface, CGITA provides users with an easy way to compute more than seventy heterogeneity indices. To test and demonstrate the usefulness of CGITA, we used a small cohort of eighteen locally advanced oral cavity (ORC cancer patients treated with definitive radiotherapies. Results. In our case study of ORC data, we found that more than ten of the current implemented heterogeneity indices outperformed SUVmean for outcome prediction in the ROC analysis with a higher area under curve (AUC. Heterogeneity indices provide a better area under the curve up to 0.9 than the SUVmean and TLG (0.6 and 0.52, resp.. Conclusions. CGITA is a free and open-source software package to quantify tumor heterogeneity from molecular images. CGITA is available for free for academic use at http://code.google.com/p/cgita.

Journal of Open Source Software (JOSS: design and first-year review

Directory of Open Access Journals (Sweden)

Arfon M. Smith

2018-02-01

Full Text Available This article describes the motivation, design, and progress of the Journal of Open Source Software (JOSS. JOSS is a free and open-access journal that publishes articles describing research software. It has the dual goals of improving the quality of the software submitted and providing a mechanism for research software developers to receive credit. While designed to work within the current merit system of science, JOSS addresses the dearth of rewards for key contributions to science made in the form of software. JOSS publishes articles that encapsulate scholarship contained in the software itself, and its rigorous peer review targets the software components: functionality, documentation, tests, continuous integration, and the license. A JOSS article contains an abstract describing the purpose and functionality of the software, references, and a link to the software archive. The article is the entry point of a JOSS submission, which encompasses the full set of software artifacts. Submission and review proceed in the open, on GitHub. Editors, reviewers, and authors work collaboratively and openly. Unlike other journals, JOSS does not reject articles requiring major revision; while not yet accepted, articles remain visible and under review until the authors make adequate changes (or withdraw, if unable to meet requirements. Once an article is accepted, JOSS gives it a digital object identifier (DOI, deposits its metadata in Crossref, and the article can begin collecting citations on indexers like Google Scholar and other services. Authors retain copyright of their JOSS article, releasing it under a Creative Commons Attribution 4.0 International License. In its first year, starting in May 2016, JOSS published 111 articles, with more than 40 additional articles under review. JOSS is a sponsored project of the nonprofit organization NumFOCUS and is an affiliate of the Open Source Initiative (OSI.

OpenTURNS, an open source uncertainty engineering software

International Nuclear Information System (INIS)

Popelin, A.L.; Dufoy, A.

2013-01-01

The needs to assess robust performances for complex systems have lead to the emergence of a new industrial simulation challenge: to take into account uncertainties when dealing with complex numerical simulation frameworks. EDF has taken part in the development of an Open Source software platform dedicated to uncertainty propagation by probabilistic methods, named OpenTURNS for Open source Treatment of Uncertainty, Risk and Statistics. OpenTURNS includes a large variety of qualified algorithms in order to manage uncertainties in industrial studies, from the uncertainty quantification step (with possibilities to model stochastic dependence thanks to the copula theory and stochastic processes), to the uncertainty propagation step (with some innovative simulation algorithms as the ziggurat method for normal variables) and the sensitivity analysis one (with some sensitivity index based on the evaluation of means conditioned to the realization of a particular event). It also enables to build some response surfaces that can include the stochastic modeling (with the chaos polynomial method for example). Generic wrappers to link OpenTURNS to the modeling software are proposed. At last, OpenTURNS is largely documented to provide rules to help use and contribution

Dilemmas within Commercial Involvement in Open Source Software

DEFF Research Database (Denmark)

Ciesielska, Malgorzata; Westenholz, Ann

2016-01-01

to free-riding. There are six levels of commercial involvement in open source communities, and each of them is characterized by a different dilemma. Originality/value – The paper sheds light on the various level of involvement of business in open source movement and emphasize that the popularized “open......Purpose – The purpose of this paper is to contribute to the literature about the commercial involvement in open source software, levels of this involvement and consequences of attempting to mix various logics of action. Design/methodology/approach – This paper uses the case study approach based...... on mixed methods: literature reviews and news searches, electronic surveys, qualitative interviews and observations. It combines discussions from several research projects as well as previous publications to present the scope of commercial choices within open source software and their consequences...

Two-step web-mining approach to study geology/geophysics-related open-source software projects

Science.gov (United States)

Behrends, Knut; Conze, Ronald

2013-04-01

Geology/geophysics is a highly interdisciplinary science, overlapping with, for instance, physics, biology and chemistry. In today's software-intensive work environments, geoscientists often encounter new open-source software from scientific fields that are only remotely related to the own field of expertise. We show how web-mining techniques can help to carry out systematic discovery and evaluation of such software. In a first step, we downloaded ~500 abstracts (each consisting of ~1 kb UTF-8 text) from agu-fm12.abstractcentral.com. This web site hosts the abstracts of all publications presented at AGU Fall Meeting 2012, the world's largest annual geology/geophysics conference. All abstracts belonged to the category "Earth and Space Science Informatics", an interdisciplinary label cross-cutting many disciplines such as "deep biosphere", "atmospheric research", and "mineral physics". Each publication was represented by a highly structured record with ~20 short data attributes, the largest authorship-record being the unstructured "abstract" field. We processed texts of the abstracts with the statistics software "R" to calculate a corpus and a term-document matrix. Using R package "tm", we applied text-mining techniques to filter data and develop hypotheses about software-development activities happening in various geology/geophysics fields. Analyzing the term-document matrix with basic techniques (e.g., word frequencies, co-occurences, weighting) as well as more complex methods (clustering, classification) several key pieces of information were extracted. For example, text-mining can be used to identify scientists who are also developers of open-source scientific software, and the names of their programming projects and codes can also be identified. In a second step, based on the intermediate results found by processing the conference-abstracts, any new hypotheses can be tested in another webmining subproject: by merging the dataset with open data from github

The Systems Biology Research Tool: evolvable open-source software

OpenAIRE

Wright, J; Wagner, A

2008-01-01

Abstract Background Research in the field of systems biology requires software for a variety of purposes. Software must be used to store, retrieve, analyze, and sometimes even to collect the data obtained from system-level (often high-throughput) experiments. Software must also be used to implement mathematical models and algorithms required for simulation and theoretical predictions on the system-level. Results We introduce a free, easy-to-use, open-source, integrated software platform calle...

The Utility of Open Source Software in Military Systems

National Research Council Canada - National Science Library

Esperon, Agustin I; Munoz, Jose P; Tanneau, Jean M

2005-01-01

.... The companies involved were THALES and GMV. The MILOS project aimed to demonstrate benefits of Open Source Software in large software based military systems, by casting off constraints inherent to traditional proprietary COTS and by taking...

For fun and profit a history of the free and open source software revolution

CERN Document Server

Tozzi, Christopher

2017-01-01

In the 1980s, there was a revolution with far-reaching consequences -- a revolution to restore software freedom. In the early 1980s, after decades of making source code available with programs, most programmers ceased sharing code freely. A band of revolutionaries, self-described "hackers," challenged this new norm by building operating systems with source code that could be freely shared. In For Fun and Profit, Christopher Tozzi offers an account of the free and open source software (FOSS) revolution, from its origins as an obscure, marginal effort by a small group of programmers to the widespread commercial use of open source software today. Tozzi explains FOSS's historical trajectory, shaped by eccentric personalities -- including Richard Stallman and Linus Torvalds -- and driven both by ideology and pragmatism, by fun and profit. Tozzi examines hacker culture and its influence on the Unix operating system, the reaction to Unix's commercialization, and the history of early Linux development. He describes ...

Free and open source software for the manipulation of digital images.

Science.gov (United States)

Solomon, Robert W

2009-06-01

Free and open source software is a type of software that is nearly as powerful as commercial software but is freely downloadable. This software can do almost everything that the expensive programs can. GIMP (gnu image manipulation program) is the free program that is comparable to Photoshop, and versions are available for Windows, Macintosh, and Linux platforms. This article briefly describes how GIMP can be installed and used to manipulate radiology images. It is no longer necessary to budget large amounts of money for high-quality software to achieve the goals of image processing and document creation because free and open source software is available for the user to download at will.

76 FR 75875 - Defense Federal Acquisition Regulation Supplement; Open Source Software Public Meeting

Science.gov (United States)

2011-12-05

... Regulation Supplement; Open Source Software Public Meeting AGENCY: Defense Acquisition Regulations System... initiate a dialogue with industry regarding the use of open source software in DoD contracts. DATES: Public... to the risks to the contractors and the Government associated with using open source software on DoD...

Governance of Open Source Software Foundations: Who Holds the Power?

Directory of Open Access Journals (Sweden)

Ludovico Prattico

2012-12-01

Full Text Available The research reported in this article attempts to discover who holds the power in open source software foundations through the analysis of governance documents. Artificial neural network analysis is used to analyse the content of the bylaws of six open source foundations (Apache, Eclipse, GNOME, Plone, Python, and SPI for the purpose of identifying power structures. Results of the research suggest that: i the actions of an open source software foundation are centered around one of three groups: Members, Chairman/President/Executive Director, and Board of Directors; ii in only one of the six foundations is the Board of Directors responsible for both the community and the product; and iii artificial neural network analysis of the content of bylaws provides unbiased insights of the power structure of open source software foundations. These results may prove useful to those who contribute to open source foundations and use their products and services.

Hardware and Software of a Bipolar Current Source Controlled by PC

Directory of Open Access Journals (Sweden)

Mirjana Rajčić-Vujasinović

2008-03-01

Full Text Available This paper describes a realization of a bipolar current source developed by the paper's authors. The source is intended for use in galvanic and other industrial plants, where a pulse-reverse current supply (with the desired shape in time is required. A prototype of the device, which provides the outcome current intensity up to ± 50 A, has been constructed. The hardware of the source consists of a Pentium IV PC, a commercial ADDA converter, an interface of authors’ original construction as well as a current regulator. The application software is developed using a commercial packet LabView as the basis.

Refurbishment and open source software

CSIR Research Space (South Africa)

Mabuza, S

2006-11-01

Full Text Available  & Open Source Software Electronic Waste Management Conference 2006 Sibongile Mabuza 2 Presentation Outline  About Meraka Institute Open Source Centre  Background to OSS  Extending life span using OSS  Different choices for different situations  Examples of... = common grazing ground (Sesotho)  Shared space for creative productivity  Emphasise African nature of scope and needs 4 Meraka Open Source Centre  Open Source Centre is part of the Meraka  Institute.  Currently, there are two offices:  CSIR headquarters  Soweto  Set up to amplify the beneficial impact of...

Building a Snow Data Management System using Open Source Software (and IDL)

Science.gov (United States)

Goodale, C. E.; Mattmann, C. A.; Ramirez, P.; Hart, A. F.; Painter, T.; Zimdars, P. A.; Bryant, A.; Brodzik, M.; Skiles, M.; Seidel, F. C.; Rittger, K. E.

2012-12-01

At NASA's Jet Propulsion Laboratory free and open source software is used everyday to support a wide range of projects, from planetary to climate to research and development. In this abstract I will discuss the key role that open source software has played in building a robust science data processing pipeline for snow hydrology research, and how the system is also able to leverage programs written in IDL, making JPL's Snow Data System a hybrid of open source and proprietary software. Main Points: - The Design of the Snow Data System (illustrate how the collection of sub-systems are combined to create a complete data processing pipeline) - Discuss the Challenges of moving from a single algorithm on a laptop, to running 100's of parallel algorithms on a cluster of servers (lesson's learned) - Code changes - Software license related challenges - Storage Requirements - System Evolution (from data archiving, to data processing, to data on a map, to near-real-time products and maps) - Road map for the next 6 months (including how easily we re-used the snowDS code base to support the Airborne Snow Observatory Mission) Software in Use and their Software Licenses: IDL - Used for pre and post processing of data. Licensed under a proprietary software license held by Excelis. Apache OODT - Used for data management and workflow processing. Licensed under the Apache License Version 2. GDAL - Geospatial Data processing library used for data re-projection currently. Licensed under the X/MIT license. GeoServer - WMS Server. Licensed under the General Public License Version 2.0 Leaflet.js - Javascript web mapping library. Licensed under the Berkeley Software Distribution License. Python - Glue code and miscellaneous data processing support. Licensed under the Python Software Foundation License. Perl - Script wrapper for running the SCAG algorithm. Licensed under the General Public License Version 3. PHP - Front-end web application programming. Licensed under the PHP License Version

A Flexible Method for Producing F.E.M. Analysis of Bone Using Open-Source Software

Science.gov (United States)

Boppana, Abhishektha; Sefcik, Ryan; Meyers, Jerry G.; Lewandowski, Beth E.

2016-01-01

This project, performed in support of the NASA GRC Space Academy summer program, sought to develop an open-source workflow methodology that segmented medical image data, created a 3D model from the segmented data, and prepared the model for finite-element analysis. In an initial step, a technological survey evaluated the performance of various existing open-source software that claim to perform these tasks. However, the survey concluded that no single software exhibited the wide array of functionality required for the potential NASA application in the area of bone, muscle and bio fluidic studies. As a result, development of a series of Python scripts provided the bridging mechanism to address the shortcomings of the available open source tools. The implementation of the VTK library provided the most quick and effective means of segmenting regions of interest from the medical images; it allowed for the export of a 3D model by using the marching cubes algorithm to build a surface mesh. To facilitate the development of the model domain from this extracted information required a surface mesh to be processed in the open-source software packages Blender and Gmsh. The Preview program of the FEBio suite proved to be sufficient for volume filling the model with an unstructured mesh and preparing boundaries specifications for finite element analysis. To fully allow FEM modeling, an in house developed Python script allowed assignment of material properties on an element by element basis by performing a weighted interpolation of voxel intensity of the parent medical image correlated to published information of image intensity to material properties, such as ash density. A graphical user interface combined the Python scripts and other software into a user friendly interface. The work using Python scripts provides a potential alternative to expensive commercial software and inadequate, limited open-source freeware programs for the creation of 3D computational models. More work

FieldTrip: Open source software for advanced analysis of MEG, EEG, and invasive electrophysiological data

NARCIS (Netherlands)

Oostenveld, R.; Fries, P.; Maris, E.G.G.; Schoffelen, J.M.

2011-01-01

This paper describes FieldTrip, an open source software package that we developed for the analysis of MEG, EEG, and other electrophysiological data. The software is implemented as a MATLAB toolbox and includes a complete set of consistent and user-friendly high-level functions that allow

Source Code Vulnerabilities in IoT Software Systems

Directory of Open Access Journals (Sweden)

Saleh Mohamed Alnaeli

2017-08-01

Full Text Available An empirical study that examines the usage of known vulnerable statements in software systems developed in C/C++ and used for IoT is presented. The study is conducted on 18 open source systems comprised of millions of lines of code and containing thousands of files. Static analysis methods are applied to each system to determine the number of unsafe commands (e.g., strcpy, strcmp, and strlen that are well-known among research communities to cause potential risks and security concerns, thereby decreasing a system’s robustness and quality. These unsafe statements are banned by many companies (e.g., Microsoft. The use of these commands should be avoided from the start when writing code and should be removed from legacy code over time as recommended by new C/C++ language standards. Each system is analyzed and the distribution of the known unsafe commands is presented. Historical trends in the usage of the unsafe commands of 7 of the systems are presented to show how the studied systems evolved over time with respect to the vulnerable code. The results show that the most prevalent unsafe command used for most systems is memcpy, followed by strlen. These results can be used to help train software developers on secure coding practices so that they can write higher quality software systems.

Crowdsourcing cloud-based software development

CERN Document Server

Li, Wei; Tsai, Wei-Tek; Wu, Wenjun

2015-01-01

This book presents the latest research on the software crowdsourcing approach to develop large and complex software in a cloud-based platform. It develops the fundamental principles, management organization and processes, and a cloud-based infrastructure to support this new software development approach. The book examines a variety of issues in software crowdsourcing processes, including software quality, costs, diversity of solutions, and the competitive nature of crowdsourcing processes. Furthermore, the book outlines a research roadmap of this emerging field, including all the key technology and management issues for the foreseeable future. Crowdsourcing, as demonstrated by Wikipedia and Facebook for online web applications, has shown promising results for a variety of applications, including healthcare, business, gold mining exploration, education, and software development. Software crowdsourcing is emerging as a promising solution to designing, developing and maintaining software. Preliminary software cr...

The Role of Free/Libre and Open Source Software in Learning Health Systems.

Science.gov (United States)

Paton, C; Karopka, T

2017-08-01

Objective: To give an overview of the role of Free/Libre and Open Source Software (FLOSS) in the context of secondary use of patient data to enable Learning Health Systems (LHSs). Methods: We conducted an environmental scan of the academic and grey literature utilising the MedFLOSS database of open source systems in healthcare to inform a discussion of the role of open source in developing LHSs that reuse patient data for research and quality improvement. Results: A wide range of FLOSS is identified that contributes to the information technology (IT) infrastructure of LHSs including operating systems, databases, frameworks, interoperability software, and mobile and web apps. The recent literature around the development and use of key clinical data management tools is also reviewed. Conclusions: FLOSS already plays a critical role in modern health IT infrastructure for the collection, storage, and analysis of patient data. The nature of FLOSS systems to be collaborative, modular, and modifiable may make open source approaches appropriate for building the digital infrastructure for a LHS. Georg Thieme Verlag KG Stuttgart.

Software Development Infrastructure for the FAIR Experiments

International Nuclear Information System (INIS)

Uhlig, F; Al-Turany, M; Bertini, D; Karabowicz, R

2011-01-01

The proposed project FAIR (Facility for Anti-proton and Ion Research) is an international accelerator facility of the next generation. It builds on top of the experience and technological developments already made at the existing GSI facility, and incorporate new technological concepts. The four scientific pillars of FAIR are NUSTAR (nuclear structure and astrophysics), PANDA (QCD studies with cooled beams of anti-protons), CBM (physics of hadronic matter at highest baryon densities), and APPA (atomic physics, plasma physics, and applications). The FairRoot framework used by all of the big FAIR experiments as a base for their own specific developments, provides basic functionality like IO, geometry handling etc. The challenge is to support all the different experiments with their heterogeneous requirements. Due to the limited manpower, one of the first design decisions was to (re)use as much as possible already available and tested software and to focus on the development of the framework. Beside the framework itself, the FairRoot core team also provides some software development tools. We will describe the complete set of tools in this article. The Makefiles for all projects are generated using CMake. For software testing and the corresponding quality assurance, we use CTest to generate the results and CDash as web front end. The tools are completed by subversion as source code repository and trac as tool for the complete source code management. This set of tools allows us to offer the full functionality we have for FairRoot also to the experiments based on FairRoot.

What makes computational open source software libraries successful?

International Nuclear Information System (INIS)

Bangerth, Wolfgang; Heister, Timo

2013-01-01

Software is the backbone of scientific computing. Yet, while we regularly publish detailed accounts about the results of scientific software, and while there is a general sense of which numerical methods work well, our community is largely unaware of best practices in writing the large-scale, open source scientific software upon which our discipline rests. This is particularly apparent in the commonly held view that writing successful software packages is largely the result of simply ‘being a good programmer’ when in fact there are many other factors involved, for example the social skill of community building. In this paper, we consider what we have found to be the necessary ingredients for successful scientific software projects and, in particular, for software libraries upon which the vast majority of scientific codes are built today. In particular, we discuss the roles of code, documentation, communities, project management and licenses. We also briefly comment on the impact on academic careers of engaging in software projects. (paper)

What makes computational open source software libraries successful?

Science.gov (United States)

Bangerth, Wolfgang; Heister, Timo

2013-01-01

Software is the backbone of scientific computing. Yet, while we regularly publish detailed accounts about the results of scientific software, and while there is a general sense of which numerical methods work well, our community is largely unaware of best practices in writing the large-scale, open source scientific software upon which our discipline rests. This is particularly apparent in the commonly held view that writing successful software packages is largely the result of simply ‘being a good programmer’ when in fact there are many other factors involved, for example the social skill of community building. In this paper, we consider what we have found to be the necessary ingredients for successful scientific software projects and, in particular, for software libraries upon which the vast majority of scientific codes are built today. In particular, we discuss the roles of code, documentation, communities, project management and licenses. We also briefly comment on the impact on academic careers of engaging in software projects.

Free and open-source software application for the evaluation of coronary computed tomography angiography images.

Science.gov (United States)

Hadlich, Marcelo Souza; Oliveira, Gláucia Maria Moraes; Feijóo, Raúl A; Azevedo, Clerio F; Tura, Bernardo Rangel; Ziemer, Paulo Gustavo Portela; Blanco, Pablo Javier; Pina, Gustavo; Meira, Márcio; Souza e Silva, Nelson Albuquerque de

2012-10-01

The standardization of images used in Medicine in 1993 was performed using the DICOM (Digital Imaging and Communications in Medicine) standard. Several tests use this standard and it is increasingly necessary to design software applications capable of handling this type of image; however, these software applications are not usually free and open-source, and this fact hinders their adjustment to most diverse interests. To develop and validate a free and open-source software application capable of handling DICOM coronary computed tomography angiography images. We developed and tested the ImageLab software in the evaluation of 100 tests randomly selected from a database. We carried out 600 tests divided between two observers using ImageLab and another software sold with Philips Brilliance computed tomography appliances in the evaluation of coronary lesions and plaques around the left main coronary artery (LMCA) and the anterior descending artery (ADA). To evaluate intraobserver, interobserver and intersoftware agreements, we used simple and kappa statistics agreements. The agreements observed between software applications were generally classified as substantial or almost perfect in most comparisons. The ImageLab software agreed with the Philips software in the evaluation of coronary computed tomography angiography tests, especially in patients without lesions, with lesions 70% in the ADA was lower, but this is also observed when the anatomical reference standard is used.

A proposed metamodel for the implementation of object oriented software through the automatic generation of source code

Directory of Open Access Journals (Sweden)

CARVALHO, J. S. C.

2008-12-01

Full Text Available During the development of software one of the most visible risks and perhaps the biggest implementation obstacle relates to the time management. All delivery deadlines software versions must be followed, but it is not always possible, sometimes due to delay in coding. This paper presents a metamodel for software implementation, which will rise to a development tool for automatic generation of source code, in order to make any development pattern transparent to the programmer, significantly reducing the time spent in coding artifacts that make up the software.

From Open Source Software to Open Source Hardware

OpenAIRE

Viseur , Robert

2012-01-01

Part 2: Lightning Talks; International audience; The open source software principles progressively give rise to new initiatives for culture (free culture), data (open data) or hardware (open hardware). The open hardware is experiencing a significant growth but the business models and legal aspects are not well known. This paper is dedicated to the economics of open hardware. We define the open hardware concept and determine intellectual property tools we can apply to open hardware, with a str...

Open-source software gets boost at UN

CERN Multimedia

Schenker, J L

2003-01-01

"A months-long backroom battle led by Brazil, with support from India, South Africa and China, against the United States over open-source software took center stage Wednesday at the UN information summit meeting" (1 page)

Cross-border software development of health information system: A case study on project between India and Pakistan based on open source software

OpenAIRE

Sabir, Uzma

2017-01-01

Global software development is a phenomenon that is receiving considerable interest from researchers during past two decades. Several challenges have been identified and approaches to deal with these challenges have been developed. Typically, western companies outsource their projects to countries where costs are lower and skilled professionals are easily available. Majority of these projects are developed for commercial purposes. However, software development projects between India and Pakis...

Understanding How the "Open" of Open Source Software (OSS) Will Improve Global Health Security.

Science.gov (United States)

Hahn, Erin; Blazes, David; Lewis, Sheri

2016-01-01

Improving global health security will require bold action in all corners of the world, particularly in developing settings, where poverty often contributes to an increase in emerging infectious diseases. In order to mitigate the impact of emerging pandemic threats, enhanced disease surveillance is needed to improve early detection and rapid response to outbreaks. However, the technology to facilitate this surveillance is often unattainable because of high costs, software and hardware maintenance needs, limited technical competence among public health officials, and internet connectivity challenges experienced in the field. One potential solution is to leverage open source software, a concept that is unfortunately often misunderstood. This article describes the principles and characteristics of open source software and how it may be applied to solve global health security challenges.

Software sourcing in the age of open leveraging the unknown workforce

CERN Document Server

Ågerfalk, Pär J; Stol, Klaas-Jan

2015-01-01

This SpringerBrief discusses multiple forms of open-source-inspired outsourcing: opensourcing, innersourcing and crowdsourcing. It uses a framework-based comparison to explain the strengths and weaknesses of each approach. By pointing out characteristics along with benefits and pitfalls of each approach, the authors provide nuanced and research-based advice to managers and developers facing software sourcing decisions. The differences and commonalities of these three emerging approaches are carefully analyzed. Chapters explore the primary challenges of reliability, efficiency and robustness in

An Enterprise Perspective on Customer Value Propositions for Open Source Software

Directory of Open Access Journals (Sweden)

Aparna Shanker

2012-12-01

Full Text Available Research on open source software (OSS has examined value creation primarily from the perspective of the individuals and suppliers that create the software. The perspective of enterprise users who use and pay for OSS has been largely neglected so far. Understanding what paying customers want and how to create products and services they value is the cornerstone of any business model. Therefore, research on what enterprise users value in OSS is of paramount importance to OSS solution suppliers; it can be used to create a new customer base and sustain an existing one. This study examines the value of OSS as perceived by enterprise customers. Through an analysis of three literature streams (firm participation in open source software, business models, and customer value, a model on customer value creation was developed. Interviews were conducted with nine decision makers from enterprises that use OSS in operational projects. The key findings of this research are that: i the maturity of the software determines the degree to which customers value their relationship with the supplier; ii customers value differentiating functionality and costs savings; and iii switching costs with OSS depend on the size, complexity, and dependencies of the software itself. This research identifies the points of value that the suppliers of OSS should focus on, and it points to the need for marketing strategies that can demonstrate this value to enterprise customers.

Repositorios digitales y software open source

Directory of Open Access Journals (Sweden)

Doria, María Vanesa

2015-06-01

Full Text Available En la actualidad las universidades se encuentran en constante evolución, fruto de la transformación generada por la sociedad de la información y el conocimiento, donde la transversalidad son las Tecnologías de la Información y Comunicación (TIC, que tienen como objetivo ampliar el acceso a la información y el conocimiento a través de su herramienta digital más distinguida, Internet. Las universidades retroalimentan su conocimiento e información, mediante las producciones científicasacadémicas, y para promover el acceso a ellas, muchas universidades están inclinándose al movimiento del Acceso Abierto (AA siguiendo la vía verde en el desarrollo de repositorios digitales (RD. Para la creación de RD es necesario analizar los software open source disponibles, dado que estos son las herramientas que facilitan la automatización de los mismos. El presente estudio se centra en el análisis de los software open source existentes en el mercado.

OsiriX: an open-source software for navigating in multidimensional DICOM images.

Science.gov (United States)

Rosset, Antoine; Spadola, Luca; Ratib, Osman

2004-09-01

A multidimensional image navigation and display software was designed for display and interpretation of large sets of multidimensional and multimodality images such as combined PET-CT studies. The software is developed in Objective-C on a Macintosh platform under the MacOS X operating system using the GNUstep development environment. It also benefits from the extremely fast and optimized 3D graphic capabilities of the OpenGL graphic standard widely used for computer games optimized for taking advantage of any hardware graphic accelerator boards available. In the design of the software special attention was given to adapt the user interface to the specific and complex tasks of navigating through large sets of image data. An interactive jog-wheel device widely used in the video and movie industry was implemented to allow users to navigate in the different dimensions of an image set much faster than with a traditional mouse or on-screen cursors and sliders. The program can easily be adapted for very specific tasks that require a limited number of functions, by adding and removing tools from the program's toolbar and avoiding an overwhelming number of unnecessary tools and functions. The processing and image rendering tools of the software are based on the open-source libraries ITK and VTK. This ensures that all new developments in image processing that could emerge from other academic institutions using these libraries can be directly ported to the OsiriX program. OsiriX is provided free of charge under the GNU open-source licensing agreement at http://homepage.mac.com/rossetantoine/osirix.

Close connections between open science and open-source software

Directory of Open Access Journals (Sweden)

YouHua Chen

2014-09-01

Full Text Available Open science is increasingly gaining attention in recent years. In this mini-review, we briefly discuss and summarize the reasons of introducing open science into academic publications for scientists. We argue that open-source software (like R and Python software can be the universal and important platforms for doing open science because of their appealing features: open source, easy-reading document, commonly used in various scientific disciplines like statistics, chemistry and biology. At last, the challenges and future perspectives of performing open science are discussed.

The Challenges of Open Source Software in IT Adoption

DEFF Research Database (Denmark)

Holm Larsen, Michael; Holck, Jesper; Pedersen, Mogens Kuhn

2004-01-01

Abstract: The paper presents an explorative study of Open Source Software (OSS) focusing on the managerial decisions for acquisition of OSS. Based on three case studies we argue that whereas small organizations often may chose adoption of OSS expecting significant cost savings, a major barrier...... for larger organizations' adoption of OSS lies in the organizations' consolidation of the enterprise architectures, in addition to that OSS will not be adopted before satisfactory delivery and procurement models for OSS are established. Keywords: Open Source Software, OSS, Enterprise Architecture, Total Cost...

CERN Web Application Detection. Refactoring and release as open source software

CERN Document Server

Lizonczyk, Piotr

2015-01-01

This paper covers my work during my assignment as participant of CERN Summer Students 2015 programme. The project was aimed at refactoring and publication of the Web Application Detection tool, which was developed at CERN and priorly used internally by the Computer Security team. The range of tasks performed include initial refactoring of code, which was developed like a script rather than a Python package, through extracting components that were not specific to CERN usage, the subsequent final release of the source code on GitHub and the integration with third-party software i.e. the w3af tool. Ultimately, Web Application Detection software received positive responses, being downloaded ca. 1500 times at the time of writing this report.

E-GRANTHALAYA: LIBRARY INFORMATION SCIENCE OPEN SOURCE AUTOMATION SOFTWARE: AN OVERVIEW

OpenAIRE

Umaiyorubagam, R.; JohnAnish, R; Jeyapragash, B

2015-01-01

The paper describes that Free Library software’s availability on-line. The open source software is available on three categories.They are library automation software, Digital Library software and integrated library packages. The paper discusses these aspect in detail.

The Value of Open Source Software Tools in Qualitative Research

Science.gov (United States)

Greenberg, Gary

2011-01-01

In an era of global networks, researchers using qualitative methods must consider the impact of any software they use on the sharing of data and findings. In this essay, I identify researchers' main areas of concern regarding the use of qualitative software packages for research. I then examine how open source software tools, wherein the publisher…

Developer Initiation and Social Interactions in OSS: A Case Study of the Apache Software Foundation

Science.gov (United States)

2014-08-01

pp. 201–215, 2003. 2. K. Crowston, K. Wei, J. Howison, and A. Wiggins, “Free/ libre open-source software devel- opment: What we know and what we do not...Understanding the process of participating in open source communities,” in International Workshop on Emerging Trends in Free/ Libre /Open Source Software ...Noname manuscript No. (will be inserted by the editor) Developer Initiation and Social Interactions in OSS: A Case Study of the Apache Software

Computer-Aided Software Engineering - An approach to real-time software development

Science.gov (United States)

Walker, Carrie K.; Turkovich, John J.

1989-01-01

A new software engineering discipline is Computer-Aided Software Engineering (CASE), a technology aimed at automating the software development process. This paper explores the development of CASE technology, particularly in the area of real-time/scientific/engineering software, and a history of CASE is given. The proposed software development environment for the Advanced Launch System (ALS CASE) is described as an example of an advanced software development system for real-time/scientific/engineering (RT/SE) software. The Automated Programming Subsystem of ALS CASE automatically generates executable code and corresponding documentation from a suitably formatted specification of the software requirements. Software requirements are interactively specified in the form of engineering block diagrams. Several demonstrations of the Automated Programming Subsystem are discussed.

Modern software approaches applied to a Hydrological model: the GEOtop Open-Source Software Project

Science.gov (United States)

Cozzini, Stefano; Endrizzi, Stefano; Cordano, Emanuele; Bertoldi, Giacomo; Dall'Amico, Matteo

2017-04-01

The GEOtop hydrological scientific package is an integrated hydrological model that simulates the heat and water budgets at and below the soil surface. It describes the three-dimensional water flow in the soil and the energy exchange with the atmosphere, considering the radiative and turbulent fluxes. Furthermore, it reproduces the highly non-linear interactions between the water and energy balance during soil freezing and thawing, and simulates the temporal evolution of snow cover, soil temperature and moisture. The core components of the package were presented in the 2.0 version (Endrizzi et al, 2014), which was released as Free Software Open-source project. However, despite the high scientific quality of the project, a modern software engineering approach was still missing. Such weakness hindered its scientific potential and its use both as a standalone package and, more importantly, in an integrate way with other hydrological software tools. In this contribution we present our recent software re-engineering efforts to create a robust and stable scientific software package open to the hydrological community, easily usable by researchers and experts, and interoperable with other packages. The activity takes as a starting point the 2.0 version, scientifically tested and published. This version, together with several test cases based on recent published or available GEOtop applications (Cordano and Rigon, 2013, WRR, Kollet et al, 2016, WRR) provides the baseline code and a certain number of referenced results as benchmark. Comparison and scientific validation can then be performed for each software re-engineering activity performed on the package. To keep track of any single change the package is published on its own github repository geotopmodel.github.io/geotop/ under GPL v3.0 license. A Continuous Integration mechanism by means of Travis-CI has been enabled on the github repository on master and main development branches. The usage of CMake configuration tool

Educatie en open-source software: meer dan gratis tools.

NARCIS (Netherlands)

Bakker, de G.M.

2008-01-01

In het onderwijs wordt steeds meer open source software gebruikt, zo merkt ook Gijs de Bakker*. In de regel moet daar niet al te veel achtergezocht worden. 'Het is in de regel niet meer dan een slimme manier om aan gratis en doorgaans kwalitatief goede software te komen'. Wat De Bakker betreft een

A generic open-source software framework supporting scenario simulations in bioterrorist crises.

Science.gov (United States)

Falenski, Alexander; Filter, Matthias; Thöns, Christian; Weiser, Armin A; Wigger, Jan-Frederik; Davis, Matthew; Douglas, Judith V; Edlund, Stefan; Hu, Kun; Kaufman, James H; Appel, Bernd; Käsbohrer, Annemarie

2013-09-01

Since the 2001 anthrax attack in the United States, awareness of threats originating from bioterrorism has grown. This led internationally to increased research efforts to improve knowledge of and approaches to protecting human and animal populations against the threat from such attacks. A collaborative effort in this context is the extension of the open-source Spatiotemporal Epidemiological Modeler (STEM) simulation and modeling software for agro- or bioterrorist crisis scenarios. STEM, originally designed to enable community-driven public health disease models and simulations, was extended with new features that enable integration of proprietary data as well as visualization of agent spread along supply and production chains. STEM now provides a fully developed open-source software infrastructure supporting critical modeling tasks such as ad hoc model generation, parameter estimation, simulation of scenario evolution, estimation of effects of mitigation or management measures, and documentation. This open-source software resource can be used free of charge. Additionally, STEM provides critical features like built-in worldwide data on administrative boundaries, transportation networks, or environmental conditions (eg, rainfall, temperature, elevation, vegetation). Users can easily combine their own confidential data with built-in public data to create customized models of desired resolution. STEM also supports collaborative and joint efforts in crisis situations by extended import and export functionalities. In this article we demonstrate specifically those new software features implemented to accomplish STEM application in agro- or bioterrorist crisis scenarios.

Firing Room Remote Application Software Development & Swamp Works Laboratory Robot Software Development

Science.gov (United States)

Garcia, Janette

2016-01-01

The National Aeronautics and Space Administration (NASA) is creating a way to send humans beyond low Earth orbit, and later to Mars. Kennedy Space Center (KSC) is working to make this possible by developing a Spaceport Command and Control System (SCCS) which will allow the launch of Space Launch System (SLS). This paper's focus is on the work performed by the author in her first and second part of the internship as a remote application software developer. During the first part of her internship, the author worked on the SCCS's software application layer by assisting multiple ground subsystems teams including Launch Accessories (LACC) and Environmental Control System (ECS) on the design, development, integration, and testing of remote control software applications. Then, on the second part of the internship, the author worked on the development of robot software at the Swamp Works Laboratory which is a research and technology development group which focuses on inventing new technology to help future In-Situ Resource Utilization (ISRU) missions.

Secure software development training course

Directory of Open Access Journals (Sweden)

Victor S. Gorbatov

2017-06-01

Full Text Available Information security is one of the most important criteria for the quality of developed software. To obtain a sufficient level of application security companies implement security process into software development life cycle. At this stage software companies encounter with deficit employees who able to solve problems of software design, implementation and application security. This article provides a description of the secure software development training course. Training course of application security is designed for co-education students of different IT-specializations.

Factors that motivate software developers in Nigerian's software ...

African Journals Online (AJOL)

It was also observed those courtesy, good reward systems, regular training, recognition, tolerance of mistakes and good leadership were high motivators of software developers. Keywords: Software developers, information technology, project managers, Nigeria International Journal of Natural and Applied Sciences, 6(4): ...

Comparative study on software development methodologies

Directory of Open Access Journals (Sweden)

Mihai Liviu DESPA

2014-12-01

Full Text Available This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager handles challenges and risks that are predominantly encountered in business and research areas that involve state of the art technology. Conventional software development stages are defined and briefly described. Development stages are the building blocks of any software development methodology so it is important to properly research this aspect. Current software development methodologies are presented. Development stages are defined for every showcased methodology. For each methodology a graphic representation is illustrated in order to better individualize its structure. Software development methodologies are compared by highlighting strengths and weaknesses from the stakeholder's point of view. Conclusions are formulated and a research direction aimed at formalizing a software development methodology dedicated to innovation orientated IT projects is enunciated.

Development of Cross-Platform Software for Well Logging Data Visualization

Science.gov (United States)

Akhmadulin, R. K.; Miraev, A. I.

2017-07-01

Well logging data processing is one of the main sources of information in the oil-gas field analysis and is of great importance in the process of its development and operation. Therefore, it is important to have the software which would accurately and clearly provide the user with processed data in the form of well logs. In this work, there have been developed a software product which not only has the basic functionality for this task (loading data from .las files, well log curves display, etc.), but can be run in different operating systems and on different devices. In the article a subject field analysis and task formulation have been performed, and the software design stage has been considered. At the end of the work the resulting software product interface has been described.

Customer Interaction in Software Development: A Comparison of Software Methodologies Deployed in Namibian Software Firms

CSIR Research Space (South Africa)

Iyawa, GE

2016-01-01

Full Text Available within the Namibian context. An implication for software project managers and software developers is that customer interaction should be properly managed to ensure that the software methodologies for improving software development processes...

Comparative study on software development methodologies

OpenAIRE

Mihai Liviu DESPA

2014-01-01

This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager han...

Global software development

DEFF Research Database (Denmark)

Matthiesen, Stina

2016-01-01

This overview presents the mid stages of my doctoral research-based on ethnographic work conducted in IT companies in India and in Denmark-on collaborative work within global software development (GSD). In the following I briefly introduce how this research seeks to spark a debate in CSCW...... by challenging contemporary ideals about software development outsourcing through the exploration of the multiplicities and asymmetric dynamics inherent in the collaborative work of GSD....

Development of a software for the design of custom-made hip prostheses using an open-source rapid application development environment.

Science.gov (United States)

Viceconti, M; Testi, D; Gori, R; Zannoni, C

2000-01-01

The present work describes a technology transfer project called HIPCOM devoted to the re-engineering of the process used by a medical devices manufacturer to design custom-made hip prostheses. Although it started with insufficient support from the end-user management, a very tight scheduling and a moderate budget, the project developed into what is considered by all partners a success story. In particular, the development of the design software, called HIPCOM Interactive Design Environment (HIDE) was completed in a time shorter than any optimistic expectation. The software was quite stable since its first beta version, and once introduced at the user site it fully replaced the original procedure in less than two months. One year after the early adoption, more than 80 custom-made prostheses had been designed with HIDE and the user had reported only two bugs, both cosmetics. The scope of the present work was to report the development experience and to investigate the reasons for these positive results, with particular reference to the development procedure and the software architecture. The choice of TCL/TK as development language and the adoption of well-defined software architecture were found to be the success key factors. Other important determinants were found to be the adoption of an incremental software engineering strategy, well suited for small to medium projects and the presence in the development staff of a technology transfer expert.

Impact of Agile Software Development Model on Software Maintainability

Science.gov (United States)

Gawali, Ajay R.

2012-01-01

Software maintenance and support costs account for up to 60% of the overall software life cycle cost and often burdens tightly budgeted information technology (IT) organizations. Agile software development approach delivers business value early, but implications on software maintainability are still unknown. The purpose of this quantitative study…

MEASUREMENT PROCESS OF SOFTWARE DEVELOPMENT PROJECTS FOR SUPPORTING STRATEGIC BUSINESS OBJECTIVES IN SOFTWARE DEVELOPING COMPANIES

Directory of Open Access Journals (Sweden)

Sandra Lais Pedroso

2013-08-01

Full Text Available Software developing companies work in a competitive market and are often challenged to make business decisions with impact on competitiveness. Models accessing maturity for software development processes quality, such as CMMI and MPS-BR, comprise process measurements systems (PMS. However, these models are not necessarily suitable to support business decisions, neither to achieve strategic goals. The objective of this work is to analyze how the PMS of software development projects could support business strategies for software developing companies. Results taken from this work show that PMS results from maturity models for software processes can be suited to help evaluating operating capabilities and supporting strategic business decisions.

Aspect-Oriented Software Development

NARCIS (Netherlands)

Filman, R.E.; Elrad, T.; Clarke, S.; Aksit, Mehmet; Unknown, [Unknown

2004-01-01

Software development is changing. The opportunities of the Internet, computerized businesses, and computer-savvy consumers, the exponential decline in the cost of computation and communication, and the increasingly dynamic environment for longer-living systems are pressing software developers to

CMMI for Systems Engineering, Software Engineering, Integrated Product and Process Development, and Supplier Sourcing, Version 1.1 (CMMI-SE/SW/IPPD/SS, V1.1) Continuous Representation

National Research Council Canada - National Science Library

2002-01-01

.... Concepts covered by this model include systems engineering, software engineering, integrated product and process development, and supplier sourcing as well as traditional CMM concepts such as process...

Open source clustering software.

Science.gov (United States)

de Hoon, M J L; Imoto, S; Nolan, J; Miyano, S

2004-06-12

We have implemented k-means clustering, hierarchical clustering and self-organizing maps in a single multipurpose open-source library of C routines, callable from other C and C++ programs. Using this library, we have created an improved version of Michael Eisen's well-known Cluster program for Windows, Mac OS X and Linux/Unix. In addition, we generated a Python and a Perl interface to the C Clustering Library, thereby combining the flexibility of a scripting language with the speed of C. The C Clustering Library and the corresponding Python C extension module Pycluster were released under the Python License, while the Perl module Algorithm::Cluster was released under the Artistic License. The GUI code Cluster 3.0 for Windows, Macintosh and Linux/Unix, as well as the corresponding command-line program, were released under the same license as the original Cluster code. The complete source code is available at http://bonsai.ims.u-tokyo.ac.jp/mdehoon/software/cluster. Alternatively, Algorithm::Cluster can be downloaded from CPAN, while Pycluster is also available as part of the Biopython distribution.

Open Source Next Generation Visualization Software for Interplanetary Missions

Science.gov (United States)

Trimble, Jay; Rinker, George

2016-01-01

Mission control is evolving quickly, driven by the requirements of new missions, and enabled by modern computing capabilities. Distributed operations, access to data anywhere, data visualization for spacecraft analysis that spans multiple data sources, flexible reconfiguration to support multiple missions, and operator use cases, are driving the need for new capabilities. NASA's Advanced Multi-Mission Operations System (AMMOS), Ames Research Center (ARC) and the Jet Propulsion Laboratory (JPL) are collaborating to build a new generation of mission operations software for visualization, to enable mission control anywhere, on the desktop, tablet and phone. The software is built on an open source platform that is open for contributions (http://nasa.github.io/openmct).

Science and Software

Science.gov (United States)

Zelt, C. A.

2017-12-01

Earth science attempts to understand how the earth works. This research often depends on software for modeling, processing, inverting or imaging. Freely sharing open-source software is essential to prevent reinventing the wheel and allows software to be improved and applied in ways the original author may never have envisioned. For young scientists, releasing software can increase their name ID when applying for jobs and funding, and create opportunities for collaborations when scientists who collect data want the software's creator to be involved in their project. However, we frequently hear scientists say software is a tool, it's not science. Creating software that implements a new or better way of earth modeling or geophysical processing, inverting or imaging should be viewed as earth science. Creating software for things like data visualization, format conversion, storage, or transmission, or programming to enhance computational performance, may be viewed as computer science. The former, ideally with an application to real data, can be published in earth science journals, the latter possibly in computer science journals. Citations in either case should accurately reflect the impact of the software on the community. Funding agencies need to support more software development and open-source releasing, and the community should give more high-profile awards for developing impactful open-source software. Funding support and community recognition for software development can have far reaching benefits when the software is used in foreseen and unforeseen ways, potentially for years after the original investment in the software development. For funding, an open-source release that is well documented should be required, with example input and output files. Appropriate funding will provide the incentive and time to release user-friendly software, and minimize the need for others to duplicate the effort. All funded software should be available through a single web site

Technical Evaluation Report 25: Open Source Software: Two learning management systems

Directory of Open Access Journals (Sweden)

Jim Depow

2003-10-01

Full Text Available This report is the second in a two-part series about open source (OSS and free software (FS systems in online education. These are rapidly emerging as alternatives to costly proprietary learning management systems (LMS and content management systems (CMS. This report reviews two LMS systems and one CMS system, all developed on the OSS/ FS principle and available to users free of charge.

Agile software development

CERN Document Server

Stober, Thomas

2009-01-01

Software Development is moving towards a more agile and more flexible approach. It turns out that the traditional 'waterfall' model is not supportive in an environment where technical, financial and strategic constraints are changing almost every day. But what is agility? What are today's major approaches? And especially: What is the impact of agile development principles on the development teams, on project management and on software architects? How can large enterprises become more agile and improve their business processes, which have been existing since many, many years? What are the limit

Tracing catchment fine sediment sources using the new SIFT (SedIment Fingerprinting Tool) open source software.

Science.gov (United States)

Pulley, S; Collins, A L

2018-09-01

The mitigation of diffuse sediment pollution requires reliable provenance information so that measures can be targeted. Sediment source fingerprinting represents one approach for supporting these needs, but recent methodological developments have resulted in an increasing complexity of data processing methods rendering the approach less accessible to non-specialists. A comprehensive new software programme (SIFT; SedIment Fingerprinting Tool) has therefore been developed which guides the user through critical data analysis decisions and automates all calculations. Multiple source group configurations and composite fingerprints are identified and tested using multiple methods of uncertainty analysis. This aims to explore the sediment provenance information provided by the tracers more comprehensively than a single model, and allows for model configurations with high uncertainties to be rejected. This paper provides an overview of its application to an agricultural catchment in the UK to determine if the approach used can provide a reduction in uncertainty and increase in precision. Five source group classifications were used; three formed using a k-means cluster analysis containing 2, 3 and 4 clusters, and two a-priori groups based upon catchment geology. Three different composite fingerprints were used for each classification and bi-plots, range tests, tracer variability ratios and virtual mixtures tested the reliability of each model configuration. Some model configurations performed poorly when apportioning the composition of virtual mixtures, and different model configurations could produce different sediment provenance results despite using composite fingerprints able to discriminate robustly between the source groups. Despite this uncertainty, dominant sediment sources were identified, and those in close proximity to each sediment sampling location were found to be of greatest importance. This new software, by integrating recent methodological developments in

Core software security security at the source

CERN Document Server

Ransome, James

2013-01-01

First and foremost, Ransome and Misra have made an engaging book that will empower readers in both large and small software development and engineering organizations to build security into their products. This book clarifies to executives the decisions to be made on software security and then provides guidance to managers and developers on process and procedure. Readers are armed with firm solutions for the fight against cyber threats.-Dr. Dena Haritos Tsamitis. Carnegie Mellon UniversityIn the wake of cloud computing and mobile apps, the issue of software security has never been more importan

Development of a new software for analyzing 3-D fracture network

Science.gov (United States)

Um, Jeong-Gi; Noh, Young-Hwan; Choi, Yosoon

2014-05-01

A new software is presented to analyze fracture network in 3-D. Recently, we completed the software package based on information given in EGU2013. The software consists of several modules that play roles in management of borehole data, stochastic modelling of fracture network, construction of analysis domain, visualization of fracture geometry in 3-D, calculation of equivalent pipes and production of cross-section diagrams. Intel Parallel Studio XE 2013, Visual Studio.NET 2010 and the open source VTK library were utilized as development tools to efficiently implement the modules and the graphical user interface of the software. A case study was performed to analyze 3-D fracture network system at the Upper Devonian Grosmont Formation in Alberta, Canada. The results have suggested that the developed software is effective in modelling and visualizing 3-D fracture network system, and can provide useful information to tackle the geomechanical problems related to strength, deformability and hydraulic behaviours of the fractured rock masses. This presentation describes the concept and details of the development and implementation of the software.

Open source tools for ATR development and performance evaluation

Science.gov (United States)

Baumann, James M.; Dilsavor, Ronald L.; Stubbles, James; Mossing, John C.

2002-07-01

Early in almost every engineering project, a decision must be made about tools; should I buy off-the-shelf tools or should I develop my own. Either choice can involve significant cost and risk. Off-the-shelf tools may be readily available, but they can be expensive to purchase and to maintain licenses, and may not be flexible enough to satisfy all project requirements. On the other hand, developing new tools permits great flexibility, but it can be time- (and budget-) consuming, and the end product still may not work as intended. Open source software has the advantages of both approaches without many of the pitfalls. This paper examines the concept of open source software, including its history, unique culture, and informal yet closely followed conventions. These characteristics influence the quality and quantity of software available, and ultimately its suitability for serious ATR development work. We give an example where Python, an open source scripting language, and OpenEV, a viewing and analysis tool for geospatial data, have been incorporated into ATR performance evaluation projects. While this case highlights the successful use of open source tools, we also offer important insight into risks associated with this approach.

Towards easing the configuration and new team member accommodation for open source software based portals

Science.gov (United States)

Fu, L.; West, P.; Zednik, S.; Fox, P. A.

2013-12-01

For simple portals such as vocabulary based services, which contain small amounts of data and require only hyper-textual representation, it is often an overkill to adopt the whole software stack of database, middleware and front end, or to use a general Web development framework as the starting point of development. Directly combining open source software is a much more favorable approach. However, our experience with the Coastal and Marine Spatial Planning Vocabulary (CMSPV) service portal shows that there are still issues such as system configuration and accommodating a new team member that need to be handled carefully. In this contribution, we share our experience in the context of the CMSPV portal, and focus on the tools and mechanisms we've developed to ease the configuration job and the incorporation process of new project members. We discuss the configuration issues that arise when we don't have complete control over how the software in use is configured and need to follow existing configuration styles that may not be well documented, especially when multiple pieces of such software need to work together as a combined system. As for the CMSPV portal, it is built on two pieces of open source software that are still under rapid development: a Fuseki data server and Epimorphics Linked Data API (ELDA) front end. Both lack mature documentation and tutorials. We developed comparison and labeling tools to ease the problem of system configuration. Another problem that slowed down the project is that project members came and went during the development process, so new members needed to start with a partially configured system and incomplete documentation left by old members. We developed documentation/tutorial maintenance mechanisms based on our comparison and labeling tools to make it easier for the new members to be incorporated into the project. These tools and mechanisms also provided benefit to other projects that reused the software components from the CMSPV

A Quantitative Study of Global Software Development Teams, Requirements, and Software Projects

Science.gov (United States)

Parker, Linda L.

2016-01-01

The study explored the relationship between global software development teams, effective software requirements, and stakeholders' perception of successful software development projects within the field of information technology management. It examined the critical relationship between Global Software Development (GSD) teams creating effective…

Student’s Entrepreneur Model Development in Creative Industry through Utilization of Web Development Software and Educational Game

Science.gov (United States)

Hasan, B.; Hasbullah, H.; Elvyanti, S.; Purnama, W.

2018-02-01

The creative industry is the utilization of creativity, skill and talent of individuals to create wealth and jobs by generating and exploiting creativity power of individual. In the field of design, utilization of information technology can spur creative industry, development of creative industry design will accommodate a lot of creative energy that can pour their ideas and creativity without limitations. Open Source software is a trend in the field of information technology has developed since the 1990s. Examples of applications developed by the Open Source approach is the Apache web services, Linux and Android Operating System, the MySQL database. This community service activities based entrepreneurship aims to: 1). give an idea about the profile of the UPI student’s knowledge of entrepreneurship about the business based creative industries in software by using web software development and educational game 2) create a model for fostering entrepreneurship based on the creative industries in software by leveraging web development and educational games, 3) conduct training and guidance on UPI students who want to develop business in the field of creative industries engaged in the software industry . PKM-based entrepreneurship activity was attended by about 35 students DPTE FPTK UPI had entrepreneurial high interest and competence in information technology. Outcome generated from PKM entrepreneurship is the emergence of entrepreneurs from the students who are interested in the creative industry in the field of software which is able to open up business opportunities for themselves and others. Another outcome of this entrepreneurship PKM activity is the publication of articles or scientific publications in journals of national/international indexed.

Software Development as Music Education Research

Science.gov (United States)

Brown, Andrew R.

2007-01-01

This paper discusses how software development can be used as a method for music education research. It explains how software development can externalize ideas, stimulate action and reflection, and provide evidence to support the educative value of new software-based experiences. Parallels between the interactive software development process and…

The State of Open Source Electronic Health Record Projects: A Software Anthropology Study.

Science.gov (United States)

Alsaffar, Mona; Yellowlees, Peter; Odor, Alberto; Hogarth, Michael

2017-02-24

Electronic health records (EHR) are a key tool in managing and storing patients' information. Currently, there are over 50 open source EHR systems available. Functionality and usability are important factors for determining the success of any system. These factors are often a direct reflection of the domain knowledge and developers' motivations. However, few published studies have focused on the characteristics of free and open source software (F/OSS) EHR systems and none to date have discussed the motivation, knowledge background, and demographic characteristics of the developers involved in open source EHR projects. This study analyzed the characteristics of prevailing F/OSS EHR systems and aimed to provide an understanding of the motivation, knowledge background, and characteristics of the developers. This study identified F/OSS EHR projects on SourceForge and other websites from May to July 2014. Projects were classified and characterized by license type, downloads, programming languages, spoken languages, project age, development status, supporting materials, top downloads by country, and whether they were "certified" EHRs. Health care F/OSS developers were also surveyed using an online survey. At the time of the assessment, we uncovered 54 open source EHR projects, but only four of them had been successfully certified under the Office of the National Coordinator for Health Information Technology (ONC Health IT) Certification Program. In the majority of cases, the open source EHR software was downloaded by users in the United States (64.07%, 148,666/232,034), underscoring that there is a significant interest in EHR open source applications in the United States. A survey of EHR open source developers was conducted and a total of 103 developers responded to the online questionnaire. The majority of EHR F/OSS developers (65.3%, 66/101) are participating in F/OSS projects as part of a paid activity and only 25.7% (26/101) of EHR F/OSS developers are, or have been

Shaping Software Engineering Curricula Using Open Source Communities: A Case Study

Science.gov (United States)

Bowring, James; Burke, Quinn

2016-01-01

This paper documents four years of a novel approach to teaching a two-course sequence in software engineering as part of the ABET-accredited computer science curriculum at the College of Charleston. This approach is team-based and centers on learning software engineering in the context of open source software projects. In the first course, teams…

Formalizing the ISDF Software Development Methodology

Directory of Open Access Journals (Sweden)

Mihai Liviu DESPA

2015-01-01

Full Text Available The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of what makes a web application innovative. Innovation in software development is presented from the end-user, project owner and project manager’s point of view. The main components of a software development methodology are identified. Thus a software development methodology should account for people, roles, skills, teams, tools, techniques, processes, activities, standards, quality measuring tools, and team values. Current software development models are presented and briefly analysed. The need for a dedicated innovation oriented software development methodology is emphasized by highlighting shortcomings of current software development methodologies when tackling innovation. The ISDF methodology is presented in the context of developing an actual application. The ALHPA application is used as a case study for emphasizing the characteristics of the ISDF methodology. The development life cycle of the ISDF methodology includes research, planning, prototyping, design, development, testing, setup and maintenance. Artefacts generated by the ISDF methodology are presented. Quality is managed in the ISDF methodology by assessing compliance, usability, reliability, repeatability, availability and security. In order to properly asses each quality component a dedicated indicator is built. A template for interpreting each indicator is provided. Conclusions are formulated and new related research topics are submitted for debate.

Formalizing the ISDF Software Development Methodology

OpenAIRE

Mihai Liviu DESPA

2015-01-01

The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of wha...

Teamwork in Distributed Agile Software Development

OpenAIRE

Gurram, Chaitanya; Bandi, Srinivas Goud

2013-01-01

Context: Distributed software development has become a most desired way of software development. Application of agile development methodologies in distributed environments has taken a new trend in developing software due to its benefits of improved communication and collaboration. Teamwork is an important concept that agile methodologies facilitate and is one of the potential determinants of team performance which was not focused in distributed agile software development. Objectives: This res...

Evaluation and selection of open-source EMR software packages based on integrated AHP and TOPSIS.

Science.gov (United States)

Zaidan, A A; Zaidan, B B; Al-Haiqi, Ahmed; Kiah, M L M; Hussain, Muzammil; Abdulnabi, Mohamed

2015-02-01

Evaluating and selecting software packages that meet the requirements of an organization are difficult aspects of software engineering process. Selecting the wrong open-source EMR software package can be costly and may adversely affect business processes and functioning of the organization. This study aims to evaluate and select open-source EMR software packages based on multi-criteria decision-making. A hands-on study was performed and a set of open-source EMR software packages were implemented locally on separate virtual machines to examine the systems more closely. Several measures as evaluation basis were specified, and the systems were selected based a set of metric outcomes using Integrated Analytic Hierarchy Process (AHP) and TOPSIS. The experimental results showed that GNUmed and OpenEMR software can provide better basis on ranking score records than other open-source EMR software packages. Copyright © 2014 Elsevier Inc. All rights reserved.

Gammasphere software development. Progress report

Energy Technology Data Exchange (ETDEWEB)

Piercey, R.B.

1994-01-01

This report describes the activities of the nuclear physics group at Mississippi State University which were performed during 1993. Significant progress has been made in the focus areas: chairing the Gammasphere Software Working Group (SWG); assisting with the porting and enhancement of the ORNL UPAK histogramming software package; and developing standard formats for Gammasphere data products. In addition, they have established a new public ftp archive to distribute software and software development tools and information.

Strategies for Developing China's Software Industry

Directory of Open Access Journals (Sweden)

Mingzhi Li

2003-01-01

Full Text Available The software industry is deemed an ideal target for a developing country to integrate into the world information and communications technology (ICT market. On the one hand the industry is labor intensive, and the developing countries have a large labor surplus; on the other hand, it is a worldwide trend for developed countries to outsource a vast amount of low-end, software-related tasks to the low-cost countries and regions, which fits into some developing countries’ caliber nicely. India has often been cited as the role model for a developing country to tap into the world software market for its continuous success in the software export sector. In comparison, China’s software industry is still negligible in the world despite its sustained high economic growth rate since the economic reform took off in the late 1970s.This paper aims at examining strategies for developing China’s software industry. We use India as a reference because of the similarities of the two countries’ stages of economic development and the clear divergence in their ICT structures and development paths. Although the language barrier has often been singled out as the major obstacle for China’s software exports, we believe the major reasons for its underdevelopment can be ascribed to the following factors. On the national level, the government attention has been skewed toward the hardware sector in the ICT industry, and there is no clear national vision for the strategic direction for the software industry.On the industry and ªrm level, software development has been regarded as the art of individual creativity rather than an engineering process. As a result, the importance of quality and standards, the two important critical factors in software development, have been largely neglected. Perhaps an even more fundamental factor lies in the deeply rooted notion that software is an attachment to the hardware and should be a free product. The lack of intellectual

DA+ data acquisition and analysis software at the Swiss Light Source macromolecular crystallography beamlines.

Science.gov (United States)

Wojdyla, Justyna Aleksandra; Kaminski, Jakub W; Panepucci, Ezequiel; Ebner, Simon; Wang, Xiaoqiang; Gabadinho, Jose; Wang, Meitian

2018-01-01

Data acquisition software is an essential component of modern macromolecular crystallography (MX) beamlines, enabling efficient use of beam time at synchrotron facilities. Developed at the Paul Scherrer Institute, the DA+ data acquisition software is implemented at all three Swiss Light Source (SLS) MX beamlines. DA+ consists of distributed services and components written in Python and Java, which communicate via messaging and streaming technologies. The major components of DA+ are the user interface, acquisition engine, online processing and database. Immediate data quality feedback is achieved with distributed automatic data analysis routines. The software architecture enables exploration of the full potential of the latest instrumentation at the SLS MX beamlines, such as the SmarGon goniometer and the EIGER X 16M detector, and development of new data collection methods.

Software development processes and analysis software: a mismatch and a novel framework

International Nuclear Information System (INIS)

Kelly, D.; Harauz, J.

2011-01-01

This paper discusses the salient characteristics of analysis software and the impact of those characteristics on its development. From this discussion, it can be seen that mainstream software development processes, usually characterized as Plan Driven or Agile, are built upon assumptions that are mismatched to the development and maintenance of analysis software. We propose a novel software development framework that would match the process normally observed in the development of analysis software. In the discussion of this framework, we suggest areas of research and directions for future work. (author)

Computer-aided software development

International Nuclear Information System (INIS)

Teichroew, D.; Hershey, E.A. III; Yamamoto, Y.

1978-01-01

In recent years, as the hardware cost/capability ratio has continued to decrease and as much of the routine data processing has been computerized, the emphasis in software development has shifted from just getting systems operational to the maintenance of existing systems, reduction of duplication by integration, selective addition of new applications, systems that are more usable, maintainable, portable and reliable and to improving the productivity of software developers. This paper examines a number of trends that are changing the methods by which software is being produced and used. (Auth.)

The Growth of open source: A look at how companies are utilizing open source software in their business models

OpenAIRE

Feare, David

2009-01-01

This paper examines how open source software is being incorporated into the business models of companies in the software industry. The goal is to answer the question of whether the open source model can help sustain economic growth. While some companies are able to maintain a "pure" open source approach with their business model, the reality is that most companies are relying on proprietary add-on value in order to generate revenue because open source itself is simply not big business. Ultima...

Extending the agile development process to develop acceptably secure software

NARCIS (Netherlands)

Ben Othmane, L.; Angin, P.; Weffers, H.T.G.; Bhargava, B.

2013-01-01

The agile software development approach makes developing secure software challenging. Existing approaches for extending the agile development process, which enables incremental and iterative software development, fall short of providing a method for efficiently ensuring the security of the software

The Astrophysics Source Code Library: Supporting software publication and citation

Science.gov (United States)

Allen, Alice; Teuben, Peter

2018-01-01

The Astrophysics Source Code Library (ASCL, ascl.net), established in 1999, is a free online registry for source codes used in research that has appeared in, or been submitted to, peer-reviewed publications. The ASCL is indexed by the SAO/NASA Astrophysics Data System (ADS) and Web of Science and is citable by using the unique ascl ID assigned to each code. In addition to registering codes, the ASCL can house archive files for download and assign them DOIs. The ASCL advocations for software citation on par with article citation, participates in multidiscipinary events such as Force11, OpenCon, and the annual Workshop on Sustainable Software for Science, works with journal publishers, and organizes Special Sessions and Birds of a Feather meetings at national and international conferences such as Astronomical Data Analysis Software and Systems (ADASS), European Week of Astronomy and Space Science, and AAS meetings. In this presentation, I will discuss some of the challenges of gathering credit for publishing software and ideas and efforts from other disciplines that may be useful to astronomy.

Mahotas: Open source software for scriptable computer vision

Directory of Open Access Journals (Sweden)

Luis Pedro Coelho

2013-07-01

Full Text Available Mahotas is a computer vision library for Python. It contains traditional image processing functionality such as filtering and morphological operations as well as more modern computer vision functions for feature computation, including interest point detection and local descriptors. The interface is in Python, a dynamic programming language, which is appropriate for fast development, but the algorithms are implemented in C++ and are tuned for speed. The library is designed to fit in with the scientific software ecosystem in this language and can leverage the existing infrastructure developed in that language. Mahotas is released under a liberal open source license (MIT License and is available from http://github.com/luispedro/mahotas and from the Python Package Index (http://pypi.python.org/pypi/mahotas. Tutorials and full API documentation are available online at http://mahotas.readthedocs.org/.

BioContainers: an open-source and community-driven framework for software standardization

Science.gov (United States)

da Veiga Leprevost, Felipe; Grüning, Björn A.; Alves Aflitos, Saulo; Röst, Hannes L.; Uszkoreit, Julian; Barsnes, Harald; Vaudel, Marc; Moreno, Pablo; Gatto, Laurent; Weber, Jonas; Bai, Mingze; Jimenez, Rafael C.; Sachsenberg, Timo; Pfeuffer, Julianus; Vera Alvarez, Roberto; Griss, Johannes; Nesvizhskii, Alexey I.; Perez-Riverol, Yasset

2017-01-01

Abstract Motivation BioContainers (biocontainers.pro) is an open-source and community-driven framework which provides platform independent executable environments for bioinformatics software. BioContainers allows labs of all sizes to easily install bioinformatics software, maintain multiple versions of the same software and combine tools into powerful analysis pipelines. BioContainers is based on popular open-source projects Docker and rkt frameworks, that allow software to be installed and executed under an isolated and controlled environment. Also, it provides infrastructure and basic guidelines to create, manage and distribute bioinformatics containers with a special focus on omics technologies. These containers can be integrated into more comprehensive bioinformatics pipelines and different architectures (local desktop, cloud environments or HPC clusters). Availability and Implementation The software is freely available at github.com/BioContainers/. Contact yperez@ebi.ac.uk PMID:28379341

BioContainers: an open-source and community-driven framework for software standardization.

Science.gov (United States)

da Veiga Leprevost, Felipe; Grüning, Björn A; Alves Aflitos, Saulo; Röst, Hannes L; Uszkoreit, Julian; Barsnes, Harald; Vaudel, Marc; Moreno, Pablo; Gatto, Laurent; Weber, Jonas; Bai, Mingze; Jimenez, Rafael C; Sachsenberg, Timo; Pfeuffer, Julianus; Vera Alvarez, Roberto; Griss, Johannes; Nesvizhskii, Alexey I; Perez-Riverol, Yasset

2017-08-15

BioContainers (biocontainers.pro) is an open-source and community-driven framework which provides platform independent executable environments for bioinformatics software. BioContainers allows labs of all sizes to easily install bioinformatics software, maintain multiple versions of the same software and combine tools into powerful analysis pipelines. BioContainers is based on popular open-source projects Docker and rkt frameworks, that allow software to be installed and executed under an isolated and controlled environment. Also, it provides infrastructure and basic guidelines to create, manage and distribute bioinformatics containers with a special focus on omics technologies. These containers can be integrated into more comprehensive bioinformatics pipelines and different architectures (local desktop, cloud environments or HPC clusters). The software is freely available at github.com/BioContainers/. yperez@ebi.ac.uk. © The Author(s) 2017. Published by Oxford University Press.

Towards Archetypes-Based Software Development

Science.gov (United States)

Piho, Gunnar; Roost, Mart; Perkins, David; Tepandi, Jaak

We present a framework for the archetypes based engineering of domains, requirements and software (Archetypes-Based Software Development, ABD). An archetype is defined as a primordial object that occurs consistently and universally in business domains and in business software systems. An archetype pattern is a collaboration of archetypes. Archetypes and archetype patterns are used to capture conceptual information into domain specific models that are utilized by ABD. The focus of ABD is on software factories - family-based development artefacts (domain specific languages, patterns, frameworks, tools, micro processes, and others) that can be used to build the family members. We demonstrate the usage of ABD for developing laboratory information management system (LIMS) software for the Clinical and Biomedical Proteomics Group, at the Leeds Institute of Molecular Medicine, University of Leeds.

Windows Developer Power Tools Turbocharge Windows development with more than 170 free and open source tools

CERN Document Server

Avery, James

2007-01-01

Software developers need to work harder and harder to bring value to their development process in order to build high quality applications and remain competitive. Developers can accomplish this by improving their productivity, quickly solving problems, and writing better code. A wealth of open source and free software tools are available for developers who want to improve the way they create, build, deploy, and use software. Tools, components, and frameworks exist to help developers at every point in the development process. Windows Developer Power Tools offers an encyclopedic guide to m

Modding a free and open source software video game: "Play testing is hard work"

Directory of Open Access Journals (Sweden)

Giacomo Poderi

2014-03-01

Full Text Available Video game modding is a form of fan productivity in contemporary participatory culture. We see modding as an important way in which modders experience and conceptualize their work. By focusing on modding in a free and open source software video game, we analyze the practice of modding and the way it changes modders' relationship with their object of interest. The modders' involvement is not always associated with fun and creativity. Indeed, activities such as play testing often undermine these dimensions of modding. We present a case study of modding that is based on ethnographic research done for The Battle for Wesnoth, a free and open source software strategy video game entirely developed by a community of volunteers.

Insights into software development in Japan

Science.gov (United States)

Duvall, Lorraine M.

1992-01-01

The interdependence of the U.S.-Japanese economies makes it imperative that we in the United States understand how business and technology developments take place in Japan. We can gain insight into these developments in software engineering by studying the context in which Japanese software is developed, the practices that are used, the problems encountered, the setting surrounding these problems, and the resolution of these problems. Context includes the technological and sociological characteristics of the software development environment, the software processes applied, personnel involved in the development process, and the corporate and social culture surrounding the development. Presented in this paper is a summary of results of a study that addresses these issues. Data for this study was collected during a three month visit to Japan where the author interviewed 20 software managers representing nine companies involved in developing software in Japan. These data are compared to similar data from the United States in which 12 managers from five companies were interviewed.

Happy software developers solve problems better: psychological measurements in empirical software engineering.

Science.gov (United States)

Graziotin, Daniel; Wang, Xiaofeng; Abrahamsson, Pekka

2014-01-01

For more than thirty years, it has been claimed that a way to improve software developers' productivity and software quality is to focus on people and to provide incentives to make developers satisfied and happy. This claim has rarely been verified in software engineering research, which faces an additional challenge in comparison to more traditional engineering fields: software development is an intellectual activity and is dominated by often-neglected human factors (called human aspects in software engineering research). Among the many skills required for software development, developers must possess high analytical problem-solving skills and creativity for the software construction process. According to psychology research, affective states-emotions and moods-deeply influence the cognitive processing abilities and performance of workers, including creativity and analytical problem solving. Nonetheless, little research has investigated the correlation between the affective states, creativity, and analytical problem-solving performance of programmers. This article echoes the call to employ psychological measurements in software engineering research. We report a study with 42 participants to investigate the relationship between the affective states, creativity, and analytical problem-solving skills of software developers. The results offer support for the claim that happy developers are indeed better problem solvers in terms of their analytical abilities. The following contributions are made by this study: (1) providing a better understanding of the impact of affective states on the creativity and analytical problem-solving capacities of developers, (2) introducing and validating psychological measurements, theories, and concepts of affective states, creativity, and analytical-problem-solving skills in empirical software engineering, and (3) raising the need for studying the human factors of software engineering by employing a multidisciplinary viewpoint.

Development of Safety-Critical Software for Nuclear Power Plant using a CASE Tool

Energy Technology Data Exchange (ETDEWEB)

Kim, Chang Ho; Oh, Do Young; Kim, Koh Eun; Choi, Woong Seock; Sohn, Se Do; Kim, Jae Hack; Kim, Hang Bae [KEPCO E and C, Daejeon (Korea, Republic of)

2011-08-15

The Integrated SOftware Development Environment (ISODE) is developed to provide the major S/W life cycle processes that are composed of development process, V/V process, requirements traceability process, and automated document generation process and target importing process to Programmable Logic Controller (PLC) platform. This provides critical safety software developers with a certified, domain optimized, model-based development environment, and the associated services to reduce time and efforts to develop software such as debugging, simulation, code generation and document generation. This also provides critical safety software verifiers with integrated V/V features of each phase of the software life cycle using appropriate tools such as model test coverage, formal verification, and automated report generation. In addition to development and verification, the ISODE gives a complete traceability solution from the SW design phase to the testing phase. Using this information, the coverage and impact analysis can be done easily whenever software modification is necessary. The final source codes of ISODE are imported into the newly developed PLC environment, as a module based after automatically converted into the format required by PLC. Additional tests for module and unit level are performed on the target platform.

Development of Safety-Critical Software for Nuclear Power Plant using a CASE Tool

International Nuclear Information System (INIS)

Kim, Chang Ho; Oh, Do Young; Kim, Koh Eun; Choi, Woong Seock; Sohn, Se Do; Kim, Jae Hack; Kim, Hang Bae

2011-01-01

The Integrated SOftware Development Environment (ISODE) is developed to provide the major S/W life cycle processes that are composed of development process, V/V process, requirements traceability process, and automated document generation process and target importing process to Programmable Logic Controller (PLC) platform. This provides critical safety software developers with a certified, domain optimized, model-based development environment, and the associated services to reduce time and efforts to develop software such as debugging, simulation, code generation and document generation. This also provides critical safety software verifiers with integrated V/V features of each phase of the software life cycle using appropriate tools such as model test coverage, formal verification, and automated report generation. In addition to development and verification, the ISODE gives a complete traceability solution from the SW design phase to the testing phase. Using this information, the coverage and impact analysis can be done easily whenever software modification is necessary. The final source codes of ISODE are imported into the newly developed PLC environment, as a module based after automatically converted into the format required by PLC. Additional tests for module and unit level are performed on the target platform

Secure Software Configuration Management Processes for nuclear safety software development environment

International Nuclear Information System (INIS)

Chou, I.-Hsin

2011-01-01

Highlights: → The proposed method emphasizes platform-independent security processes. → A hybrid process based on the nuclear SCM and security regulations is proposed. → Detailed descriptions and Process Flow Diagram are useful for software developers. - Abstract: The main difference between nuclear and generic software is that the risk factor is infinitely greater in nuclear software - if there is a malfunction in the safety system, it can result in significant economic loss, physical damage or threat to human life. However, secure software development environment have often been ignored in the nuclear industry. In response to the terrorist attacks on September 11, 2001, the US Nuclear Regulatory Commission (USNRC) revised the Regulatory Guide (RG 1.152-2006) 'Criteria for use of computers in safety systems of nuclear power plants' to provide specific security guidance throughout the software development life cycle. Software Configuration Management (SCM) is an essential discipline in the software development environment. SCM involves identifying configuration items, controlling changes to those items, and maintaining integrity and traceability of them. For securing the nuclear safety software, this paper proposes a Secure SCM Processes (S 2 CMP) which infuses regulatory security requirements into proposed SCM processes. Furthermore, a Process Flow Diagram (PFD) is adopted to describe S 2 CMP, which is intended to enhance the communication between regulators and developers.

General guidelines for biomedical software development [version 1; referees: 2 approved

Directory of Open Access Journals (Sweden)

Luis Bastiao Silva

2017-03-01

Full Text Available Most bioinformatics tools available today were not written by professional software developers, but by people that wanted to solve their own problems, using computational solutions and spending the minimum time and effort possible, since these were just the means to an end. Consequently, a vast number of software applications are currently available, hindering the task of identifying the utility and quality of each. At the same time, this situation has hindered regular adoption of these tools in clinical practice. Typically, they are not sufficiently developed to be used by most clinical researchers and practitioners. To address these issues, it is necessary to re-think how biomedical applications are built and adopt new strategies that ensure quality, efficiency, robustness, correctness and reusability of software components. We also need to engage end-users during the development process to ensure that applications fit their needs. In this review, we present a set of guidelines to support biomedical software development, with an explanation of how they can be implemented and what kind of open-source tools can be used for each specific topic.

General guidelines for biomedical software development [version 2; referees: 2 approved

Directory of Open Access Journals (Sweden)

Luis Bastiao Silva

2017-07-01

Full Text Available Most bioinformatics tools available today were not written by professional software developers, but by people that wanted to solve their own problems, using computational solutions and spending the minimum time and effort possible, since these were just the means to an end. Consequently, a vast number of software applications are currently available, hindering the task of identifying the utility and quality of each. At the same time, this situation has hindered regular adoption of these tools in clinical practice. Typically, they are not sufficiently developed to be used by most clinical researchers and practitioners. To address these issues, it is necessary to re-think how biomedical applications are built and adopt new strategies that ensure quality, efficiency, robustness, correctness and reusability of software components. We also need to engage end-users during the development process to ensure that applications fit their needs. In this review, we present a set of guidelines to support biomedical software development, with an explanation of how they can be implemented and what kind of open-source tools can be used for each specific topic.

An Assessment between Software Development Life Cycle Models of Software Engineering

OpenAIRE

Er. KESHAV VERMA; Er. PRAMOD KUMAR; Er. MOHIT KUMAR; Er.GYANESH TIWARI

2013-01-01

This research deals with an essential and important subject in Digital world. It is related with the software managing processes that inspect the part of software development during the development models, which are called as software development life cycle. It shows five of the development models namely, waterfall, Iteration, V-shaped, spiral and Extreme programming. These models have advantages and disadvantages as well. So, the main objective of this research is to represent dissimilar mod...

Strategies for successful software development risk management

Directory of Open Access Journals (Sweden)

Marija Boban

2003-01-01

Full Text Available Nowadays, software is becoming a major part of enterprise business. Software development is activity connected with advanced technology and high level of knowledge. Risks on software development projects must be successfully mitigated to produce successful software systems. Lack of a defined approach to risk management is one of the common causes for project failures. To improve project chances for success, this work investigates common risk impact areas to perceive a foundation that can be used to define a common approach to software risk management. Based on typical risk impact areas on software development projects, we propose three risk management strategies suitable for a broad area of enterprises and software development projects with different amounts of connected risks. Proposed strategies define activities that should be performed for successful risk management, the one that will enable software development projects to perceive risks as soon as possible and to solve problems connected with risk materialization. We also propose a risk-based approach to software development planning and risk management as attempts to address and retire the highest impact risks as early as possible in the development process. Proposed strategies should improve risk management on software development projects and help create a successful software solution.

A development methodology for scientific software

International Nuclear Information System (INIS)

Cort, G.; Barrus, D.M.; Goldstone, J.A.; Miller, L.; Nelson, R.O.; Poore, R.V.

1985-01-01

We present the details of a software development methodology that addresses all phases of the software life cycle, yet is well suited for application by small projects with limited resources. The methodology has been developed at the Los Alamos Weapons Neutron Research (WNR) Facility and was utilized during the recent development of the WNR Data Acquisition Command Language. The methodology emphasizes the development and maintenance of comprehensive documentation for all software components. The impact of the methodology upon software quality and programmer productivity is assessed

Open Source Software The Challenge Ahead

CERN Multimedia

CERN. Geneva

2007-01-01

The open source community has done amazingly well in terms of challenging the historical epicenter of computing - the supercomputer and data center - and driving change there. Linux now represents a healthy and growing share of infrastructure in large organisations globally. Apache and other infrastructural components have established the new de facto standard for software in the back office: freedom. It would be easy to declare victory. But the real challenge lies ahead - taking free software to the mass market, to your grandparents, to your nieces and nephews, to your friends. This is the next wave, and if we are to be successful we need to articulate the audacious goals clearly and loudly - because that's how the community process works best. Speaker Bio: Mark Shuttleworth founded the Ubuntu Project in early 2004. Ubuntu is an enterprise Linux distribution that is freely available worldwide and has both desktop and enterprise server editions. Mark studied finance and information technology at the Universit...

Software Development Standard Processes (SDSP)

Science.gov (United States)

Lavin, Milton L.; Wang, James J.; Morillo, Ronald; Mayer, John T.; Jamshidian, Barzia; Shimizu, Kenneth J.; Wilkinson, Belinda M.; Hihn, Jairus M.; Borgen, Rosana B.; Meyer, Kenneth N.;

Curious exceptions? : open source software and "open" technology

NARCIS (Netherlands)

Nuvolari, A.; Rullani, F.; St. Amant, Kirk; Still, Brian

2007-01-01

The aim of thts chapter is to explore the differences and commonalities between open source software and other cases of open technology. The concept of open technology is used here to indicate various models of innovation based on the participation of a wide range of different actors who freely

Lean software development in action

CERN Document Server

Janes, Andrea

2014-01-01

This book illustrates how goal-oriented, automated measurement can be used to create Lean organizations and to facilitate the development of Lean software, while also demonstrating the practical implementation of Lean software development by combining tried and trusted tools. In order to be successful, a Lean orientation of software development has to go hand in hand with a company's overall business strategy. To achieve this, two interrelated aspects require special attention: measurement and experience management. In this book, Janes and Succi provide the necessary knowledge to establish "

Free and Open Source Software for land degradation vulnerability assessment

Science.gov (United States)

Imbrenda, Vito; Calamita, Giuseppe; Coluzzi, Rosa; D'Emilio, Mariagrazia; Lanfredi, Maria Teresa; Perrone, Angela; Ragosta, Maria; Simoniello, Tiziana

2013-04-01

Nowadays the role of FOSS software in scientific research is becoming increasingly important. Besides the important issues of reduced costs for licences, legality and security there are many other reasons that make FOSS software attractive. Firstly, making the code opened is a warranty of quality permitting to thousands of developers around the world to check the code and fix bugs rather than rely on vendors claims. FOSS communities are usually enthusiastic about helping other users for solving problems and expand or customize software (flexibility). Most important for this study, the interoperability allows to combine the user-friendly QGIS with the powerful GRASS-GIS and the richness of statistical methods of R in order to process remote sensing data and to perform geo-statistical analysis in one only environment. This study is focused on the land degradation (i.e. the reduction in the capacity of the land to provide ecosystem goods and services and assure its functions) and in particular on the estimation of the vulnerability levels in order to suggest appropriate policy actions to reduce/halt land degradation impacts, using the above mentioned software. The area investigated is the Basilicata Region (Southern Italy) where large natural areas are mixed with anthropized areas. To identify different levels of vulnerability we adopted the Environmentally Sensitive Areas (ESAs) model, based on the combination of indicators related to soil, climate, vegetation and anthropic stress. Such indicators were estimated by using the following data-sources: - Basilicata Region Geoportal to assess soil vulnerability; - DESERTNET2 project to evaluate potential vegetation vulnerability and climate vulnerability; - NDVI-MODIS satellite time series (2000-2010) with 250m resolution, available as 16-day composite from the NASA LP DAAC to characterize the dynamic component of vegetation; - Agricultural Census data 2010, Corine Land Cover 2006 and morphological information to assess

Custom software development for use in a clinical laboratory.

Science.gov (United States)

Sinard, John H; Gershkovich, Peter

2012-01-01

In-house software development for use in a clinical laboratory is a controversial issue. Many of the objections raised are based on outdated software development practices, an exaggeration of the risks involved, and an underestimation of the benefits that can be realized. Buy versus build analyses typically do not consider total costs of ownership, and unfortunately decisions are often made by people who are not directly affected by the workflow obstacles or benefits that result from those decisions. We have been developing custom software for clinical use for over a decade, and this article presents our perspective on this practice. A complete analysis of the decision to develop or purchase must ultimately examine how the end result will mesh with the departmental workflow, and custom-developed solutions typically can have the greater positive impact on efficiency and productivity, substantially altering the decision balance sheet. Involving the end-users in preparation of the functional specifications is crucial to the success of the process. A large development team is not needed, and even a single programmer can develop significant solutions. Many of the risks associated with custom development can be mitigated by a well-structured development process, use of open-source tools, and embracing an agile development philosophy. In-house solutions have the significant advantage of being adaptable to changing departmental needs, contributing to efficient and higher quality patient care.

A Roadmap to Continuous Integration for ATLAS Software Development

Science.gov (United States)

Elmsheuser, J.; Krasznahorkay, A.; Obreshkov, E.; Undrus, A.; ATLAS Collaboration

2017-10-01

The ATLAS software infrastructure facilitates efforts of more than 1000 developers working on the code base of 2200 packages with 4 million lines of C++ and 1.4 million lines of python code. The ATLAS offline code management system is the powerful, flexible framework for processing new package versions requests, probing code changes in the Nightly Build System, migration to new platforms and compilers, deployment of production releases for worldwide access and supporting physicists with tools and interfaces for efficient software use. It maintains multi-stream, parallel development environment with about 70 multi-platform branches of nightly releases and provides vast opportunities for testing new packages, for verifying patches to existing software and for migrating to new platforms and compilers. The system evolution is currently aimed on the adoption of modern continuous integration (CI) practices focused on building nightly releases early and often, with rigorous unit and integration testing. This paper describes the CI incorporation program for the ATLAS software infrastructure. It brings modern open source tools such as Jenkins and GitLab into the ATLAS Nightly System, rationalizes hardware resource allocation and administrative operations, provides improved feedback and means to fix broken builds promptly for developers. Once adopted, ATLAS CI practices will improve and accelerate innovation cycles and result in increased confidence in new software deployments. The paper reports the status of Jenkins integration with the ATLAS Nightly System as well as short and long term plans for the incorporation of CI practices.

The Utility of Open Source Software in Military Systems

National Research Council Canada - National Science Library

Esperon, Agustin I; Munoz, Jose P; Tanneau, Jean M

2005-01-01

The MILOS (Military Systems based on Open-source Software) project was a European research program in the Eurofinder framework, attached to the CEPA 6 and co-financed by the Ministry of Defence of France and Spain...

SIMULATION OF THE SYSTEMS WITH RENEWABLE ENERGY SOURCES USING HOMER SOFTWARE

Directory of Open Access Journals (Sweden)

FIRINCĂ S.D.

2015-12-01

Full Text Available This paper simulates by using the Homer software, distributed energy systems with capacity below 1 MW. Among the renewable energy sources are used wind and solar energy. For photovoltaic panels, we are considering two situations: fixed panels, oriented at 45 ° and panels with tracking system with two axis. Simulation results contain information regarding operation hours of the system throughout the year, energy produced from the renewable energy sources, energy consumption for the load, and excess of electrical energy. The Homer software also allows an economic analysis of these systems.

Software development for teleroentgenogram analysis

Science.gov (United States)

Goshkoderov, A. A.; Khlebnikov, N. A.; Obabkov, I. N.; Serkov, K. V.; Gajniyarov, I. M.; Aliev, A. A.

2017-09-01

A framework for the analysis and calculation of teleroentgenograms was developed. Software development was carried out in the Department of Children's Dentistry and Orthodontics in Ural State Medical University. The software calculates the teleroentgenogram by the original method which was developed in this medical department. Program allows designing its own methods for calculating the teleroentgenograms by new methods. It is planned to use the technology of machine learning (Neural networks) in the software. This will help to make the process of calculating the teleroentgenograms easier because methodological points will be placed automatically.

Developing open source, self-contained disease surveillance software applications for use in resource-limited settings

Directory of Open Access Journals (Sweden)

Campbell Timothy C

2012-09-01

Full Text Available Abstract Background Emerging public health threats often originate in resource-limited countries. In recognition of this fact, the World Health Organization issued revised International Health Regulations in 2005, which call for significantly increased reporting and response capabilities for all signatory nations. Electronic biosurveillance systems can improve the timeliness of public health data collection, aid in the early detection of and response to disease outbreaks, and enhance situational awareness. Methods As components of its Suite for Automated Global bioSurveillance (SAGES program, The Johns Hopkins University Applied Physics Laboratory developed two open-source, electronic biosurveillance systems for use in resource-limited settings. OpenESSENCE provides web-based data entry, analysis, and reporting. ESSENCE Desktop Edition provides similar capabilities for settings without internet access. Both systems may be configured to collect data using locally available cell phone technologies. Results ESSENCE Desktop Edition has been deployed for two years in the Republic of the Philippines. Local health clinics have rapidly adopted the new technology to provide daily reporting, thus eliminating the two-to-three week data lag of the previous paper-based system. Conclusions OpenESSENCE and ESSENCE Desktop Edition are two open-source software products with the capability of significantly improving disease surveillance in a wide range of resource-limited settings. These products, and other emerging surveillance technologies, can assist resource-limited countries compliance with the revised International Health Regulations.

Development of neutron activation analysis software

International Nuclear Information System (INIS)

Wang Liyu

1987-10-01

The software for quantitative neutron activation analysis was developed to run under the MS/DOS operating system. The programmes of the IBM/SPAN include: spectra file transfer from and to a Canberra Series 35 multichannel analyzer, spectrum evaluation routines, calibration subprogrammes, and quantitative analysis. The programmes for spectrum analysis include fitting routine for separation of multiple lines by reproducing the peak shape with a combination of Gaussian and exponential terms. The programmes were tested on an IBM/AT-compatible computer. The programmes and the sources are available costfree for the IAEA projects of Technical Cooperation. 7 refs, 3 figs

Educational Software: A Developer's Perspective.

Science.gov (United States)

Armstrong, Timothy C.; Loane, Russell F.

1994-01-01

Examines the current status and short-term future of computer software development in higher education. Topics discussed include educational advantages of software; current program development techniques, including object oriented programming; and market trends, including IBM versus Macintosh and multimedia programs. (LRW)

Coordination Implications of Software Coupling in Open Source Projects

NARCIS (Netherlands)

Amrit, Chintan Amrit; van Hillegersberg, Jos; Ågerfalk, Pär

2010-01-01

The effect of software coupling on the quality of software has been studied quite widely since the seminal paper on software modularity by Parnas [1]. However, the effect of the increase in software coupling on the coordination of the developers has not been researched as much. In commercial

SOFTWARE PROCESS IMPROVEMENT: AWARENESS, USE, AND BENEFITS IN CANADIAN SOFTWARE DEVELOPMENT FIRMS

OpenAIRE

CHEVERS, DELROY

2017-01-01

ABSTRACT Since 1982, the software development community has been concerned with the delivery of quality systems. Software process improvement (SPI) is an initiative to avoid the delivery of low quality systems. However, the awareness and adoption of SPI is low. Thus, this study examines the rate of awareness, use, and benefits of SPI initiatives in Canadian software development firms. Using SPSS as the analytical tool, this study found that 59% of Canadian software development firms are aware...

An open-source thermodynamic software library

DEFF Research Database (Denmark)

Ritschel, Tobias Kasper Skovborg; Gaspar, Jozsef; Capolei, Andrea

This is a technical report which accompanies the article ”An open-source thermodynamic software library” which describes an efficient Matlab and C implementation for evaluation of thermodynamic properties. In this technical report we present the model equations, that are also presented in the paper......, together with a full set of first and second order derivatives with respect to temperature and pressure, and in cases where applicable, also with respect to mole numbers. The library is based on parameters and correlations from the DIPPR database and the Peng-Robinson and the Soave-Redlich-Kwong equations...

TOGAF usage in outsourcing of software development

Directory of Open Access Journals (Sweden)

Aziz Ahmad Rais

2013-12-01

Full Text Available TOGAF is an Enterprise Architecture framework that provides a method for developing Enterprise Architecture called architecture development method (ADM. The purpose of this paper is whether TOGAF ADM can be used for developing software application architecture. Because the software application architecture is one of the disciplines in application development life cycle, it is important to find out how the enterprise architecture development method can support the application architecture development. Having an open standard that can be used in the application architecture development could help in outsourcing of software development. If ADM could be used for software application architecture development, then we could consider its usability in outsourcing of software development.

Six Sigma software development

CERN Document Server

Tayntor, Christine B

2002-01-01

Since Six Sigma has had marked success in improving quality in other settings, and since the quality of software remains poor, it seems a natural evolution to apply the concepts and tools of Six Sigma to system development and the IT department. Until now however, there were no books available that applied these concepts to the system development process. Six Sigma Software Development fills this void and illustrates how Six Sigma concepts can be applied to all aspects of the evolving system development process. It includes the traditional waterfall model and in the support of legacy systems,

Hospital Management Software Development

OpenAIRE

sobogunGod, olawale

2012-01-01

The purpose of this thesis was to implement a hospital management software which is suitable for small private hospitals in Nigeria, especially for the ones that use a file based system for storing information rather than having it stored in a more efficient and safer environment like databases or excel programming software. The software developed within this thesis project was specifically designed for the Rainbow specialist hospital which is based in Lagos, the commercial neurological cente...

Understanding flexible and distributed software development processes

OpenAIRE

Agerfalk, Par J.; Fitzgerald, Brian

2006-01-01

peer-reviewed The minitrack on Flexible and Distributed Software Development Processes addresses two important and partially intertwined current themes in software development: process flexibility and globally distributed software development

cPath: open source software for collecting, storing, and querying biological pathways

Directory of Open Access Journals (Sweden)

Gross Benjamin E

2006-11-01

Full Text Available Abstract Background Biological pathways, including metabolic pathways, protein interaction networks, signal transduction pathways, and gene regulatory networks, are currently represented in over 220 diverse databases. These data are crucial for the study of specific biological processes, including human diseases. Standard exchange formats for pathway information, such as BioPAX, CellML, SBML and PSI-MI, enable convenient collection of this data for biological research, but mechanisms for common storage and communication are required. Results We have developed cPath, an open source database and web application for collecting, storing, and querying biological pathway data. cPath makes it easy to aggregate custom pathway data sets available in standard exchange formats from multiple databases, present pathway data to biologists via a customizable web interface, and export pathway data via a web service to third-party software, such as Cytoscape, for visualization and analysis. cPath is software only, and does not include new pathway information. Key features include: a built-in identifier mapping service for linking identical interactors and linking to external resources; built-in support for PSI-MI and BioPAX standard pathway exchange formats; a web service interface for searching and retrieving pathway data sets; and thorough documentation. The cPath software is freely available under the LGPL open source license for academic and commercial use. Conclusion cPath is a robust, scalable, modular, professional-grade software platform for collecting, storing, and querying biological pathways. It can serve as the core data handling component in information systems for pathway visualization, analysis and modeling.

Moodle: How we built a community around open source software

CERN Multimedia

CERN. Geneva

2010-01-01

Martin will talk about the continuing growth of Moodle from an idea into a worldwide project helping millions of people. He'll talk about the factors that have contributed to Moodle's current success, some that were integrated from the beginning of the project and some that were learned along the way.About the speakerMartin Dougiamas is best known as the founder of Moodle, the popular free course management system used by millions of teachers around the world.As the executive director of Moodle Pty Ltd in Perth, Western Australia, he leads the team of software developers at the heart of the Moodle project and the global network of 54 Moodle Partner service companies that help provide funding for this independent open source software project.Martin has a mixed academic background with post-graduate degrees in Computer Science and Education, and continues to focus on researching how educators approach internet-based education. His major goal for the future is to improve the quality of education by encouraging ...

Software Quality Perceptions of Stakeholders Involved in the Software Development Process

Science.gov (United States)

Padmanabhan, Priya

2013-01-01

Software quality is one of the primary determinants of project management success. Stakeholders involved in software development widely agree that quality is important (Barney and Wohlin 2009). However, they may differ on what constitutes software quality, and which of its attributes are more important than others. Although, software quality…

SMART-P MMIS Software Development by Considering the Software License for Nuclear Power Plants and the Development Cost

International Nuclear Information System (INIS)

Suh, Yong Suk; Park, Jae Hong; Park, Heui Youn; Son, Ki Sung; Lee, Ki Hyun; Kim, Hyeon Soo

2005-01-01

The acceptance criteria of software for safety system functions in NPPs (Nuclear Power Plants) are as follows: 1) acceptable plans should be prepared to control the software development activities, 2) the plans should be followed in an acceptable software life cycle, and 3) the process should produce acceptable design outputs. The KINS (Korea Institute of Nuclear Safety) recommended that the software life cycle should be established based on the IEEE Std 1074 with a supplementary requirement of a software safety analysis. The KINS emphasized that the software should be developed to show its high qualities. This paper identifies the major requirements to achieve the software license from the KINS and presents the major facts reflected in the SMART-P (System-integrated Modular Advanced ReacTor-Pilot) MMIS (Man-Machine Interface Systems) which is being developed by KAERI and targeted to start operation in 2010. This paper also addresses major concerns on the development of a safety critical software and the facts reflected in the SMART-P MMIS

The software development process in worldwide collaborations

International Nuclear Information System (INIS)

Amako, K.

1998-01-01

High energy physics experiments in future colliders are inevitably large scale international collaborations. In these experiments, software development has to be done by a large number of physicists, software engineers and computer scientists, dispersed all over the world. The major subject of this paper is to discuss on various aspects of software development in the worldwide environment. These include software engineering and methodology, software development process and management. (orig.)

A Software Development Platform for Mechatronic Systems

DEFF Research Database (Denmark)

Guan, Wei

Software has become increasingly determinative for development of mechatronic systems, which underscores the importance of demands for shortened time-to-market, increased productivity, higher quality, and improved dependability. As the complexity of systems is dramatically increasing, these demands...... present a challenge to the practitioners who adopt conventional software development approach. An effective approach towards industrial production of software for mechatronic systems is needed. This approach requires a disciplined engineering process that encompasses model-driven engineering and component......-based software engineering, whereby we enable incremental software development using component models to address the essential design issues of real-time embedded systems. To this end, this dissertation presents a software development platform that provides an incremental model-driven development process based...

Digital Preservation in Open-Source Digital Library Software

Science.gov (United States)

Madalli, Devika P.; Barve, Sunita; Amin, Saiful

2012-01-01

Digital archives and digital library projects are being initiated all over the world for materials of different formats and domains. To organize, store, and retrieve digital content, many libraries as well as archiving centers are using either proprietary or open-source software. While it is accepted that print media can survive for centuries with…

Reviews in innovative software development

DEFF Research Database (Denmark)

Aaen, Ivan; Boelsmand, Jeppe Vestergaard; Jensen, Rasmus

2009-01-01

This paper proposes a new review approach for innovative software development. Innovative software development implies that requirements are rarely available as a basis for reviewing and that the purpose of a review is as much to forward additional ideas, as to validate what has been accomplished...

STARS 2.0: 2nd-generation open-source archiving and query software

Science.gov (United States)

Winegar, Tom

2008-07-01

The Subaru Telescope is in process of developing an open-source alternative to the 1st-generation software and databases (STARS 1) used for archiving and query. For STARS 2, we have chosen PHP and Python for scripting and MySQL as the database software. We have collected feedback from staff and observers, and used this feedback to significantly improve the design and functionality of our future archiving and query software. Archiving - We identified two weaknesses in 1st-generation STARS archiving software: a complex and inflexible table structure and uncoordinated system administration for our business model: taking pictures from the summit and archiving them in both Hawaii and Japan. We adopted a simplified and normalized table structure with passive keyword collection, and we are designing an archive-to-archive file transfer system that automatically reports real-time status and error conditions and permits error recovery. Query - We identified several weaknesses in 1st-generation STARS query software: inflexible query tools, poor sharing of calibration data, and no automatic file transfer mechanisms to observers. We are developing improved query tools and sharing of calibration data, and multi-protocol unassisted file transfer mechanisms for observers. In the process, we have redefined a 'query': from an invisible search result that can only transfer once in-house right now, with little status and error reporting and no error recovery - to a stored search result that can be monitored, transferred to different locations with multiple protocols, reporting status and error conditions and permitting recovery from errors.

WormGender - Open-Source Software for Automatic Caenorhabditis elegans Sex Ratio Measurement.

Directory of Open Access Journals (Sweden)

Marta K Labocha

Full Text Available Fast and quantitative analysis of animal phenotypes is one of the major challenges of current biology. Here we report the WormGender open-source software, which is designed for accurate quantification of sex ratio in Caenorhabditis elegans. The software functions include, i automatic recognition and counting of adult hermaphrodites and males, ii a manual inspection feature that enables manual correction of errors, and iii flexibility to use new training images to optimize the software for different imaging conditions. We evaluated the performance of our software by comparing manual and automated assessment of sex ratio. Our data showed that the WormGender software provided overall accurate sex ratio measurements. We further demonstrated the usage of WormGender by quantifying the high incidence of male (him phenotype in 27 mutant strains. Mutants of nine genes (brc-1, C30G12.6, cep-1, coh-3, him-3, him-5, him-8, skr-1, unc-86 showed significant him phenotype. The WormGender is written in Java and can be installed and run on both Windows and Mac platforms. The source code is freely available together with a user manual and sample data at http://www.QuantWorm.org/. The source code and sample data are also available at http://dx.doi.org/10.6084/m9.figshare.1541248.

Assessment of best practice of software development in developing ...

African Journals Online (AJOL)

... Understand the technology of the software (4.03), Memory limit set (3.91), Application pool not shared (3.88) and other parameters were examined for software development. The analysis shows the variance of the assessment of best practices in Software development firms and they are in conformity with the global trend.

Survivability as a Tool for Evaluating Open Source Software

Science.gov (United States)

2015-06-01

tremendously successful in certain applications such as the Mozilla Firefox web browser and the Apache web server [10]. Open source software is often...source versions (such as Internet Explorer compared to Mozilla Firefox ), which typically conclude that vulnerabilities are, in fact, much more...for radios M. Smith ACS ACS ROS autonomous functionality (none) ACS PX4 Firmware PX4 FMU driver BSD 3-clause ACS PX4 Nuttx real time OS BSD ACS

ABCD, an Open Source Software for Modern Libraries

Directory of Open Access Journals (Sweden)

Sangeeta Namdev Dhamdhere

2011-12-01

Full Text Available Nowadays, librarians are using various kinds of open source software for different purposes such as library automation, digitization, institutional repository, content management. ABCD, acronym for Automatisación de Bibliotécas y Centros de Documentación, is one of such software. It caters to almost all present needs of modern libraries of any sizes. It offers a solution to library automation with ISBD as well as local formats. It has excellent indexing and retrieval features based on UNESCO’s ISIS technology, a web OPAC, and a library Portal with integrated meta-search and content management system to manage online as well as offline digital resources and physical documents and media.

Model for Simulating a Spiral Software-Development Process

Science.gov (United States)

Mizell, Carolyn; Curley, Charles; Nayak, Umanath

2010-01-01

), productivity (number of lines of code per hour), and number of defects per source line of code. The user provides the number of resources, the overall percent of effort that should be allocated to each process step, and the number of desired staff members for each step. The output of PATT includes the size of the product, a measure of effort, a measure of rework effort, the duration of the entire process, and the numbers of injected, detected, and corrected defects as well as a number of other interesting features. In the development of the present model, steps were added to the IEEE 12207 waterfall process, and this model and its implementing software were made to run repeatedly through the sequence of steps, each repetition representing an iteration in a spiral process. Because the IEEE 12207 model is founded on a waterfall paradigm, it enables direct comparison of spiral and waterfall processes. The model can be used throughout a software-development project to analyze the project as more information becomes available. For instance, data from early iterations can be used as inputs to the model, and the model can be used to estimate the time and cost of carrying the project to completion.

Software Engineering Program: Software Process Improvement Guidebook

Science.gov (United States)

1996-01-01

The purpose of this document is to provide experience-based guidance in implementing a software process improvement program in any NASA software development or maintenance community. This guidebook details how to define, operate, and implement a working software process improvement program. It describes the concept of the software process improvement program and its basic organizational components. It then describes the structure, organization, and operation of the software process improvement program, illustrating all these concepts with specific NASA examples. The information presented in the document is derived from the experiences of several NASA software organizations, including the SEL, the SEAL, and the SORCE. Their experiences reflect many of the elements of software process improvement within NASA. This guidebook presents lessons learned in a form usable by anyone considering establishing a software process improvement program within his or her own environment. This guidebook attempts to balance general and detailed information. It provides material general enough to be usable by NASA organizations whose characteristics do not directly match those of the sources of the information and models presented herein. It also keeps the ideas sufficiently close to the sources of the practical experiences that have generated the models and information.

Self-service for software development projects and HPC activities

International Nuclear Information System (INIS)

Husejko, M; Høimyr, N; Gonzalez, A; Koloventzos, G; Asbury, D; Trzcinska, A; Agtzidis, I; Botrel, G; Otto, J

2014-01-01

This contribution describes how CERN has implemented several essential tools for agile software development processes, ranging from version control (Git) to issue tracking (Jira) and documentation (Wikis). Running such services in a large organisation like CERN requires many administrative actions both by users and service providers, such as creating software projects, managing access rights, users and groups, and performing tool-specific customisation. Dealing with these requests manually would be a time-consuming task. Another area of our CERN computing services that has required dedicated manual support has been clusters for specific user communities with special needs. Our aim is to move all our services to a layered approach, with server infrastructure running on the internal cloud computing infrastructure at CERN. This contribution illustrates how we plan to optimise the management of our of services by means of an end-user facing platform acting as a portal into all the related services for software projects, inspired by popular portals for open-source developments such as Sourceforge, GitHub and others. Furthermore, the contribution will discuss recent activities with tests and evaluations of High Performance Computing (HPC) applications on different hardware and software stacks, and plans to offer a dynamically scalable HPC service at CERN, based on affordable hardware.

Automating Object-Oriented Software Development Methods

NARCIS (Netherlands)

Tekinerdogan, B.; Saeki, Motoshi; Sunyé, Gerson; van den Broek, P.M.; Hruby, Pavel; Tekinerdogan, B.; van den Broek, P.M.; Saeki, M.; Hruby, P.; Sunye, G.

2001-01-01

Current software projects have generally to deal with producing and managing large and complex software products. It is generally believed that applying software development methods are useful in coping with this complexity and for supporting quality. As such numerous object-oriented software

Automating Object-Oriented Software Development Methods

NARCIS (Netherlands)

Tekinerdogan, B.; Frohner, A´ kos; Saeki, Motoshi; Sunyé, Gerson; van den Broek, P.M.; Hruby, Pavel

2002-01-01

Current software projects have generally to deal with producing and managing large and complex software products. It is generally believed that applying software development methods are useful in coping with this complexity and for supporting quality. As such numerous object-oriented software

VMStools: Open-source software for the processing, analysis and visualisation of fisheries logbook and VMS data

NARCIS (Netherlands)

Hintzen, N.T.; Bastardie, F.; Beare, D.J.; Piet, G.J.; Ulrich, C.; Deporte, N.; Egekvist, J.; Degel, H.

2012-01-01

VMStools is a package of open-source software, build using the freeware environment R, specifically developed for the processing, analysis and visualisation of landings (logbooks) and vessel location data (VMS) from commercial fisheries. Analyses start with standardized data formats for logbook

Workshop on Developing Safe Software

International Nuclear Information System (INIS)

Lawrence, J.D.

1994-11-01

The Workshop on Developing Safe Software was held July 22--23, 1992, at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the US Nuclear Regulatory Commission. These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was learned from the workshop

Workshop on developing safe software

International Nuclear Information System (INIS)

Lawrence, J.D.

1992-01-01

The Workshop on Developing Safe Software was held July 22--23 at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the U. S. Nuclear Regulatory Commission (NRC). These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was teamed from the workshop

A cultura de colaboração e inovação dos desenvolvedores de software livre | The collaborative and innovative culture of free software developers

Directory of Open Access Journals (Sweden)

Clóvis Ricardo Montenegro de Lima

2010-03-01

Abstract This article aims to investigate the culture of the developers of free software, especially as regards collaboration and productive organizational and social innovation. It discusses the relationship between immaterial labor and free software collaborative development. It starts with the main feature of software development with open source: a productive partnership. This implies the use of living knowledge and the formation of a shared intersubjectivity. Communication mediated by language is the basis of this production. The article also discusses the relationship between collaborative production and innovation. Collaboration extends the communicative interaction between producers, opening up more possibilities for innovation. Intersubjectivity shared condenses in a specific cultural background. It is concluded that the culture of the developers of free software, as generated from the productive collaboration, serves as a context for collaboration and innovation. Keywords culture; free software; innovation; collaboration; cyberculture.

Manifesto for the Software Development Professionalization

Directory of Open Access Journals (Sweden)

Red Latinoamericana en Ingeniería de Software (RedLatinaIS

2013-12-01

Full Text Available One of the central problems of current economic development and industrial competitiveness, social and scientific, is the complexity of large and intensive software systems, and processes for their development and implementation. This complexity is defined by the amount and heterogeneity of the interaction of the hardware with the software components, their inter-relationships, of incorporation of the technical and organizational environments, and the interfaces to humans. The domain of these systems requires actions and scientific thoughts, hierarchical and systematic; also, the success of the products, services and organizations, is increasingly determined by the availability of suitable software products. Therefore, highly qualified professionals, able to understand and master the systems, involved in the entire life cycle of software engineering, and adopt different roles during the development. This is the reason that guide the thinking of this Manifesto , which aims is to achieve the Professionalization of Software Development.

The Development of Point Doppler Velocimeter Data Acquisition and Processing Software

Science.gov (United States)

Cavone, Angelo A.

2008-01-01

In order to develop efficient and quiet aircraft and validate Computational Fluid Dynamic predications, aerodynamic researchers require flow parameter measurements to characterize flow fields about wind tunnel models and jet flows. A one-component Point Doppler Velocimeter (pDv), a non-intrusive, laser-based instrument, was constructed using a design/develop/test/validate/deploy approach. A primary component of the instrument is software required for system control/management and data collection/reduction. This software along with evaluation algorithms, advanced pDv from a laboratory curiosity to a production level instrument. Simultaneous pDv and pitot probe velocity measurements obtained at the centerline of a flow exiting a two-inch jet, matched within 0.4%. Flow turbulence spectra obtained with pDv and a hot-wire detected the primary and secondary harmonics with equal dynamic range produced by the fan driving the flow. Novel,hardware and software methods were developed, tested and incorporated into the system to eliminate and/or minimize error sources and improve system reliability.

Distance education course on spatial multi-hazard risk assessment, using Open Source software

Science.gov (United States)

van Westen, C. J.; Frigerio, S.

2009-04-01

As part of the capacity building activities of the United Nations University - ITC School on Disaster Geo-Information Management (UNU-ITC DGIM) the International Institute for Geoinformation Science and Earth Observation (ITC) has developed a distance education course on the application of Geographic Information Systems for multi-hazard risk assessment. This course is designed for academic staff, as well as for professionals working in (non-) governmental organizations where knowledge of disaster risk management is essential. The course guides the participants through the entire process of risk assessment, on the basis of a case study of a city exposed to multiple hazards, in a developing country. The courses consists of eight modules, each with a guide book explaining the theoretical background, and guiding the participants through spatial data requirements for risk assessment, hazard assessment procedures, generation of elements at risk databases, vulnerability assessment, qualitative and quantitative risk assessment methods, risk evaluation and risk reduction. Linked to the theory is a large set of exercises, with exercise descriptions, answer sheets, demos and GIS data. The exercises deal with four different types of hazards: earthquakes, flooding, technological hazards, and landslides. One important consideration in designing the course is that people from developing countries should not be restricted in using it due to financial burdens for software acquisition. Therefore the aim was to use Open Source software as a basis. The GIS exercises are written for the ILWIS software. All exercises have also been integrated into a WebGIS, using the Open source software CartoWeb (based on GNU License). It is modular and customizable thanks to its object-oriented architecture and based on a hierarchical structure (to manage and organize every package of information of every step required in risk assessment). Different switches for every component of the risk assessment

ggCyto: Next Generation Open-Source Visualization Software for Cytometry.

Science.gov (United States)

Van, Phu; Jiang, Wenxin; Gottardo, Raphael; Finak, Greg

2018-06-01

Open source software for computational cytometry has gained in popularity over the past few years. Efforts such as FlowCAP, the Lyoplate and Euroflow projects have highlighted the importance of efforts to standardize both experimental and computational aspects of cytometry data analysis. The R/BioConductor platform hosts the largest collection of open source cytometry software covering all aspects of data analysis and providing infrastructure to represent and analyze cytometry data with all relevant experimental, gating, and cell population annotations enabling fully reproducible data analysis. Data visualization frameworks to support this infrastructure have lagged behind. ggCyto is a new open-source BioConductor software package for cytometry data visualization built on ggplot2 that enables ggplot-like functionality with the core BioConductor flow cytometry data structures. Amongst its features are the ability to transform data and axes on-the-fly using cytometry-specific transformations, plot faceting by experimental meta-data variables, and partial matching of channel, marker and cell populations names to the contents of the BioConductor cytometry data structures. We demonstrate the salient features of the package using publicly available cytometry data with complete reproducible examples in a supplementary material vignette. https://bioconductor.org/packages/devel/bioc/html/ggcyto.html. gfinak@fredhutch.org. Supplementary data are available at Bioinformatics online and at http://rglab.org/ggcyto/.

Stimulating Creativity Through Opportunistic Software Development

NARCIS (Netherlands)

Z. Obrenovic; D. Gasevic; A. P. W. Eliëns (Anton)

2008-01-01

htmlabstractUsing opportunistic software development principles in computer engineering education encourages students to be creative and to develop solutions that cross the boundaries of diverse technologies. A framework for opportunistic software development education helps to create a space in

Development of virtual hands using animation software and graphical modelling

International Nuclear Information System (INIS)

Oliveira, Erick da S.; Junior, Alberico B. de C.

2016-01-01

The numerical dosimetry uses virtual anthropomorphic simulators to represent the human being in computational framework and thus assess the risks associated with exposure to a radioactive source. With the development of computer animation software, the development of these simulators was facilitated using only knowledge of human anatomy to prepare various types of simulators (man, woman, child and baby) in various positions (sitting, standing, running) or part thereof (head, trunk and limbs). These simulators are constructed by loops of handling and due to the versatility of the method, one can create various geometries irradiation was not possible before. In this work, we have built an exhibition of a radiopharmaceutical scenario manipulating radioactive material using animation software and graphical modeling and anatomical database. (author)

Stimulating creativity through opportunistic software development

NARCIS (Netherlands)

Obrenovic, Z.; Gasevic, D.; Eliëns, A.

2008-01-01

Using opportunistic software development principles in computer engineering education encourages students to be creative and to develop solutions that cross the boundaries of diverse technologies. A framework for opportunistic software development education helps to create a space in which students

Development of a web GIS application for emissions inventory spatial allocation based on open source software tools

Science.gov (United States)

Gkatzoflias, Dimitrios; Mellios, Giorgos; Samaras, Zissis

2013-03-01

Combining emission inventory methods and geographic information systems (GIS) remains a key issue for environmental modelling and management purposes. This paper examines the development of a web GIS application as part of an emission inventory system that produces maps and files with spatial allocated emissions in a grid format. The study is not confined in the maps produced but also presents the features and capabilities of a web application that can be used by every user even without any prior knowledge of the GIS field. The development of the application was based on open source software tools such as MapServer for the GIS functions, PostgreSQL and PostGIS for the data management and HTML, PHP and JavaScript as programming languages. In addition, background processes are used in an innovative manner to handle the time consuming and computational costly procedures of the application. Furthermore, a web map service was created to provide maps to other clients such as the Google Maps API v3 that is used as part of the user interface. The output of the application includes maps in vector and raster format, maps with temporal resolution on daily and hourly basis, grid files that can be used by air quality management systems and grid files consistent with the European Monitoring and Evaluation Programme Grid. Although the system was developed and validated for the Republic of Cyprus covering a remarkable wide range of pollutant and emissions sources, it can be easily customized for use in other countries or smaller areas, as long as geospatial and activity data are available.

The Use of Open Source Software for Open Architecture System on CNC Milling Machine

Directory of Open Access Journals (Sweden)

Dalmasius Ganjar Subagio

2012-03-01

Full Text Available Computer numerical control (CNC milling machine system cannot be separated from the software required to follow the provisions of the Open Architecture capabilities that have portability, extend ability, interoperability, and scalability. When a prescribed period of a CNC milling machine has passed and the manufacturer decided to discontinue it, then the user will have problems for maintaining the performance of the machine. This paper aims to show that the using of open source software (OSS is the way out to maintain engine performance. With the use of OSS, users no longer depend on the software built by the manufacturer because OSS is open and can be developed independently. In this paper, USBCNC V.3.42 is used as an alternative OSS. The test result shows that the work piece is in match with the desired pattern. The test result shows that the performance of machines using OSS has similar performance with the machine using software from the manufacturer. 

Dimensional Error in Rapid Prototyping with Open Source Software and Low-cost 3D-printer.

Science.gov (United States)

Rendón-Medina, Marco A; Andrade-Delgado, Laura; Telich-Tarriba, Jose E; Fuente-Del-Campo, Antonio; Altamirano-Arcos, Carlos A

2018-01-01

Rapid prototyping models (RPMs) had been extensively used in craniofacial and maxillofacial surgery, especially in areas such as orthognathic surgery, posttraumatic or oncological reconstructions, and implantology. Economic limitations are higher in developing countries such as Mexico, where resources dedicated to health care are limited, therefore limiting the use of RPM to few selected centers. This article aims to determine the dimensional error of a low-cost fused deposition modeling 3D printer (Tronxy P802MA, Shenzhen, Tronxy Technology Co), with Open source software. An ordinary dry human mandible was scanned with a computed tomography device. The data were processed with open software to build a rapid prototype with a fused deposition machine. Linear measurements were performed to find the mean absolute and relative difference. The mean absolute and relative difference was 0.65 mm and 1.96%, respectively ( P = 0.96). Low-cost FDM machines and Open Source Software are excellent options to manufacture RPM, with the benefit of low cost and a similar relative error than other more expensive technologies.

Dimensional Error in Rapid Prototyping with Open Source Software and Low-cost 3D-printer

Directory of Open Access Journals (Sweden)

Marco A. Rendón-Medina

2018-01-01

Full Text Available Summary:. Rapid prototyping models (RPMs had been extensively used in craniofacial and maxillofacial surgery, especially in areas such as orthognathic surgery, posttraumatic or oncological reconstructions, and implantology. Economic limitations are higher in developing countries such as Mexico, where resources dedicated to health care are limited, therefore limiting the use of RPM to few selected centers. This article aims to determine the dimensional error of a low-cost fused deposition modeling 3D printer (Tronxy P802MA, Shenzhen, Tronxy Technology Co, with Open source software. An ordinary dry human mandible was scanned with a computed tomography device. The data were processed with open software to build a rapid prototype with a fused deposition machine. Linear measurements were performed to find the mean absolute and relative difference. The mean absolute and relative difference was 0.65 mm and 1.96%, respectively (P = 0.96. Low-cost FDM machines and Open Source Software are excellent options to manufacture RPM, with the benefit of low cost and a similar relative error than other more expensive technologies.

A survey of quality assurance practices in biomedical open source software projects.

Science.gov (United States)

Koru, Günes; El Emam, Khaled; Neisa, Angelica; Umarji, Medha

2007-05-07

Open source (OS) software is continuously gaining recognition and use in the biomedical domain, for example, in health informatics and bioinformatics. Given the mission critical nature of applications in this domain and their potential impact on patient safety, it is important to understand to what degree and how effectively biomedical OS developers perform standard quality assurance (QA) activities such as peer reviews and testing. This would allow the users of biomedical OS software to better understand the quality risks, if any, and the developers to identify process improvement opportunities to produce higher quality software. A survey of developers working on biomedical OS projects was conducted to examine the QA activities that are performed. We took a descriptive approach to summarize the implementation of QA activities and then examined some of the factors that may be related to the implementation of such practices. Our descriptive results show that 63% (95% CI, 54-72) of projects did not include peer reviews in their development process, while 82% (95% CI, 75-89) did include testing. Approximately 74% (95% CI, 67-81) of developers did not have a background in computing, 80% (95% CI, 74-87) were paid for their contributions to the project, and 52% (95% CI, 43-60) had PhDs. A multivariate logistic regression model to predict the implementation of peer reviews was not significant (likelihood ratio test = 16.86, 9 df, P = .051) and neither was a model to predict the implementation of testing (likelihood ratio test = 3.34, 9 df, P = .95). Less attention is paid to peer review than testing. However, the former is a complementary, and necessary, QA practice rather than an alternative. Therefore, one can argue that there are quality risks, at least at this point in time, in transitioning biomedical OS software into any critical settings that may have operational, financial, or safety implications. Developers of biomedical OS applications should invest more effort

Multicriteria analysis using open-source data and software for the implementation of a centralized biomedical waste management system in a developing country (Guinea, Conakry).

Science.gov (United States)

Pérez Peña, José Vicente; Baldó, Mane; Acosta, Yarci; Verschueren, Laurent; Thibaud, Kenmognie; Bilivogui, Pépé; Jean-Paul Ngandu, Alain; Beavogui, Maoro

2017-04-01

In the last decade the increasing interest for public health has promoted specific regulations for the transport, storage, transformation and/or elimination of potentially toxic waste. A special concern should focus on the effective management of biomedical waste, due to the environmental and health risk associated with them. The first stage for the effective management these waste includes the selection of the best sites for the location of facilities for its storage and/or elimination. Best-site selection is accomplished by means of multi-criteria decision analyses (MCDA) that aim to minimize the social and environmental impact, and to maximize management efficiency. In this work we presented a methodology that uses open-source software and data to analyze the best location for the implantation of a centralized waste management system in a developing country (Guinea, Conakry). We applied an analytical hierarchy process (AHP) using different thematic layers such as land use (derived from up-to-date Sentinel 2 remote sensing images), soil type, distance and type of roads, hydrography, distance to dense populated areas, etc. Land-use data were derived from up-to-date Sentinel 2 remote sensing images, whereas roads and hydrography were obtained from the Open Street Map database and latter validated with administrative data. We performed the AHP analysis with the aid of QGIS open-software Geospatial Information System. This methodology is very effective for developing countries as it uses open-source software and data for the MCDA analysis, thus reducing costs in these first stages of the integrated analysis.

A Case Study about Open Source Internet Software in the eThekwini ...

African Journals Online (AJOL)

This paper describes the use of open source software applications on the web sites of the large eThekwini municipality in Durban, South Africa. The implementation of open source was both a response to the 2003 South African Government approval of open source solutions in government departments and because open ...

Comparison of 3D reconstruction of mandible for pre-operative planning using commercial and open-source software

Science.gov (United States)

Abdullah, Johari Yap; Omar, Marzuki; Pritam, Helmi Mohd Hadi; Husein, Adam; Rajion, Zainul Ahmad

2016-12-01

3D printing of mandible is important for pre-operative planning, diagnostic purposes, as well as for education and training. Currently, the processing of CT data is routinely performed with commercial software which increases the cost of operation and patient management for a small clinical setting. Usage of open-source software as an alternative to commercial software for 3D reconstruction of the mandible from CT data is scarce. The aim of this study is to compare two methods of 3D reconstruction of the mandible using commercial Materialise Mimics software and open-source Medical Imaging Interaction Toolkit (MITK) software. Head CT images with a slice thickness of 1 mm and a matrix of 512x512 pixels each were retrieved from the server located at the Radiology Department of Hospital Universiti Sains Malaysia. The CT data were analysed and the 3D models of mandible were reconstructed using both commercial Materialise Mimics and open-source MITK software. Both virtual 3D models were saved in STL format and exported to 3matic and MeshLab software for morphometric and image analyses. Both models were compared using Wilcoxon Signed Rank Test and Hausdorff Distance. No significant differences were obtained between the 3D models of the mandible produced using Mimics and MITK software. The 3D model of the mandible produced using MITK open-source software is comparable to the commercial MIMICS software. Therefore, open-source software could be used in clinical setting for pre-operative planning to minimise the operational cost.

Building a cooperative digital libary with open source software - the case of CLACSO in Latin America

OpenAIRE

Babini, Dominique

2006-01-01

Description of why and how the Latin American Social Science Council (CLACSO-Consejo Latinoamericano de Ciencias Sociales) has developed a cooperative digital library with open source Greenstone software, to build digital collections for its member institutes in 21 countries of Latin America and the Caribbean

Network Distributed Data Acquisition, Storage, and Graphical Live Display Software for a Laser Ion Source at CERN

CERN Document Server

Rossel, Ralf Erik; Rothe, Sebastian

2014-01-01

This project documentation outlines the requirements and implementation details for the measurement data recording software currently in development for the Resonance Ionisation Laser Ion Source (RILIS) at CERN. The software is capable of acquiring data from multiple laser parameter monitoring devices and associating the gathered values to represent qualitative and quantitative measurements. The measurement data is displayed graphically within the program and recorded to files for later analysis. The main application of the software is the acquisition coordination and recording of measurement data during spectroscopy experiments performed by RILIS and collaborating experiments. This document describes the design concept and detailed program implementation status at the end of July 2014 and provides an outlook to future developments in RILIS spectroscopy data acquisition.

Application of agile methodologies in software development

Directory of Open Access Journals (Sweden)

Jovanović Aca D.

2016-01-01

Full Text Available The paper presents the potentials for the development of software using agile methodologies. Special consideration is devoted to the potentials and advantages of use of the Scrum methodology in the development of software and the relationship between the implementation of agile methodologies and the software development projects.

Next Generation Software Development

National Research Council Canada - National Science Library

Manna, Zohar

2005-01-01

Under this grant we have studied the development of a scientifically sound basis for software development that builds on widely used pragmatic methods but is firmly grounded in well-established formal...

TMT approach to observatory software development process

Science.gov (United States)

Buur, Hanne; Subramaniam, Annapurni; Gillies, Kim; Dumas, Christophe; Bhatia, Ravinder

2016-07-01

The purpose of the Observatory Software System (OSW) is to integrate all software and hardware components of the Thirty Meter Telescope (TMT) to enable observations and data capture; thus it is a complex software system that is defined by four principal software subsystems: Common Software (CSW), Executive Software (ESW), Data Management System (DMS) and Science Operations Support System (SOSS), all of which have interdependencies with the observatory control systems and data acquisition systems. Therefore, the software development process and plan must consider dependencies to other subsystems, manage architecture, interfaces and design, manage software scope and complexity, and standardize and optimize use of resources and tools. Additionally, the TMT Observatory Software will largely be developed in India through TMT's workshare relationship with the India TMT Coordination Centre (ITCC) and use of Indian software industry vendors, which adds complexity and challenges to the software development process, communication and coordination of activities and priorities as well as measuring performance and managing quality and risk. The software project management challenge for the TMT OSW is thus a multi-faceted technical, managerial, communications and interpersonal relations challenge. The approach TMT is using to manage this multifaceted challenge is a combination of establishing an effective geographically distributed software team (Integrated Product Team) with strong project management and technical leadership provided by the TMT Project Office (PO) and the ITCC partner to manage plans, process, performance, risk and quality, and to facilitate effective communications; establishing an effective cross-functional software management team composed of stakeholders, OSW leadership and ITCC leadership to manage dependencies and software release plans, technical complexities and change to approved interfaces, architecture, design and tool set, and to facilitate

Developing software for safety-critical applications

International Nuclear Information System (INIS)

Chudleigh, M.

1989-01-01

The effective implementation of many safety-critical systems involves microprocessors running software which needs to be of very high integrity. This article describes some of the problems of producing such software and the place of software within the total system. A development strategy is proposed based on three principles: the goal of defect-free development, the use of mathematical formalism, and the use of an independent team for testing. (author)

Software Development Initiatives to Identify and Mitigate Security Threats - Two Systematic Mapping Studies

Directory of Open Access Journals (Sweden)

Paulina Silva

2016-12-01

Full Text Available Software Security and development experts have addressed the problem of building secure software systems. There are several processes and initiatives to achieve secure software systems. However, most of these lack empirical evidence of its application and impact in building secure software systems. Two systematic mapping studies (SM have been conducted to cover the existent initiatives for identification and mitigation of security threats. The SMs created were executed in two steps, first in 2015 July, and complemented through a backward snowballing in 2016 July. Integrated results of these two SM studies show a total of 30 relevant sources were identified; 17 different initiatives covering threats identification and 14 covering the mitigation of threats were found. All the initiatives were associated to at least one activity of the Software Development Lifecycle (SDLC; while 6 showed signs of being applied in industrial settings, only 3 initiatives presented experimental evidence of its results through controlled experiments, some of the other selected studies presented case studies or proposals.

Firing Room Remote Application Software Development

Science.gov (United States)

Liu, Kan

2015-01-01

The Engineering and Technology Directorate (NE) at National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC) is designing a new command and control system for the checkout and launch of Space Launch System (SLS) and future rockets. The purposes of the semester long internship as a remote application software developer include the design, development, integration, and verification of the software and hardware in the firing rooms, in particular with the Mobile Launcher (ML) Launch Accessories (LACC) subsystem. In addition, a software test verification procedure document was created to verify and checkout LACC software for Launch Equipment Test Facility (LETF) testing.

Safety critical software development qualification

International Nuclear Information System (INIS)

Marron, J. E.

2006-01-01

With the increasing use of digital systems in control applications, customers must acquire appropriate expectations for software development and quality assurance procedures. Purchasers and users of digital systems need to understand the benefits to the supplier of effective quality systems. These systems consist not only of procedures but tools that enable automation. Without the use of automation, quality can not be assured. A software and systems quality program starts with the documents you are very familiar with. But these documents must define more than the final system. They must address specific development environment characteristics and testing capabilities. Starting with the RFP, some of the items that should be introduced are Software Configuration Management, regression testing and defect tracking. The digital system customer is in the best position to enforce the use of software and systems quality programs by including them in project requirements as early as the Purchase Order. The customer's understanding of the full scope and implementation of a software quality program is essential to achieving the quality necessary in nuclear projects, and, incidentally, completing those projects on schedule. (authors)

Capability Maturity Model Integration (CMMISM), Version 1.1 CMMISM for Systems Engineering, Software Engineering, Integrated Product and Process Development, and Supplier Sourcing (CMMI-SE/SW/IPPD/SS, V1.1). Staged Representation

National Research Council Canada - National Science Library

2002-01-01

.... Concepts covered by this model include systems engineering, software engineering, integrated product and process development, and supplier sourcing as well as traditional CMM concepts such as process...

Workflow-Based Software Development Environment

Science.gov (United States)

Izygon, Michel E.

2013-01-01

The Software Developer's Assistant (SDA) helps software teams more efficiently and accurately conduct or execute software processes associated with NASA mission-critical software. SDA is a process enactment platform that guides software teams through project-specific standards, processes, and procedures. Software projects are decomposed into all of their required process steps or tasks, and each task is assigned to project personnel. SDA orchestrates the performance of work required to complete all process tasks in the correct sequence. The software then notifies team members when they may begin work on their assigned tasks and provides the tools, instructions, reference materials, and supportive artifacts that allow users to compliantly perform the work. A combination of technology components captures and enacts any software process use to support the software lifecycle. It creates an adaptive workflow environment that can be modified as needed. SDA achieves software process automation through a Business Process Management (BPM) approach to managing the software lifecycle for mission-critical projects. It contains five main parts: TieFlow (workflow engine), Business Rules (rules to alter process flow), Common Repository (storage for project artifacts, versions, history, schedules, etc.), SOA (interface to allow internal, GFE, or COTS tools integration), and the Web Portal Interface (collaborative web environment

Development methodology for the software life cycle process of the safety software

Energy Technology Data Exchange (ETDEWEB)

Kim, D. H.; Lee, S. S. [BNF Technology, Taejon (Korea, Republic of); Cha, K. H.; Lee, C. S.; Kwon, K. C.; Han, H. B. [KAERI, Taejon (Korea, Republic of)

2002-05-01

A methodology for developing software life cycle processes (SLCP) is proposed to develop the digital safety-critical Engineered Safety Features - Component Control System (ESF-CCS) successfully. A software life cycle model is selected as the hybrid model mixed with waterfall, prototyping, and spiral models and is composed of two stages , development stages of prototype of ESF-CCS and ESF-CCS. To produce the software life cycle (SLC) for the Development of the Digital Reactor Safety System, the Activities referenced in IEEE Std. 1074-1997 are mapped onto the hybrid model. The SLCP is established after the available OPAs (Organizational Process Asset) are applied to the SLC Activities, and the known constraints are reconciled. The established SLCP describes well the software life cycle activities with which the Regulatory Authority provides.

Development methodology for the software life cycle process of the safety software

International Nuclear Information System (INIS)

Kim, D. H.; Lee, S. S.; Cha, K. H.; Lee, C. S.; Kwon, K. C.; Han, H. B.

2002-01-01

A methodology for developing software life cycle processes (SLCP) is proposed to develop the digital safety-critical Engineered Safety Features - Component Control System (ESF-CCS) successfully. A software life cycle model is selected as the hybrid model mixed with waterfall, prototyping, and spiral models and is composed of two stages , development stages of prototype of ESF-CCS and ESF-CCS. To produce the software life cycle (SLC) for the Development of the Digital Reactor Safety System, the Activities referenced in IEEE Std. 1074-1997 are mapped onto the hybrid model. The SLCP is established after the available OPAs (Organizational Process Asset) are applied to the SLC Activities, and the known constraints are reconciled. The established SLCP describes well the software life cycle activities with which the Regulatory Authority provides

Semantic integration of gene expression analysis tools and data sources using software connectors

Science.gov (United States)

2013-01-01

Background The study and analysis of gene expression measurements is the primary focus of functional genomics. Once expression data is available, biologists are faced with the task of extracting (new) knowledge associated to the underlying biological phenomenon. Most often, in order to perform this task, biologists execute a number of analysis activities on the available gene expression dataset rather than a single analysis activity. The integration of heteregeneous tools and data sources to create an integrated analysis environment represents a challenging and error-prone task. Semantic integration enables the assignment of unambiguous meanings to data shared among different applications in an integrated environment, allowing the exchange of data in a semantically consistent and meaningful way. This work aims at developing an ontology-based methodology for the semantic integration of gene expression analysis tools and data sources. The proposed methodology relies on software connectors to support not only the access to heterogeneous data sources but also the definition of transformation rules on exchanged data. Results We have studied the different challenges involved in the integration of computer systems and the role software connectors play in this task. We have also studied a number of gene expression technologies, analysis tools and related ontologies in order to devise basic integration scenarios and propose a reference ontology for the gene expression domain. Then, we have defined a number of activities and associated guidelines to prescribe how the development of connectors should be carried out. Finally, we have applied the proposed methodology in the construction of three different integration scenarios involving the use of different tools for the analysis of different types of gene expression data. Conclusions The proposed methodology facilitates the development of connectors capable of semantically integrating different gene expression analysis tools

Development of a dose simulation software for gamma irradiation systems

International Nuclear Information System (INIS)

Omi, Nelson Minoru

2000-01-01

The use of high temperature, thermal and chemical treatment are among the used sterilization process of food and many products. The ionizing radiation came as another option, it has being used for many purposes and it became available due to the technological development in the second half of the 20 th century. Together with sterilization, many uses of the ionizing radiation were developed, such as applications on health, industrial products and waste recycling, food irradiation, vulcanizing, polymerization and gems color enhancing. The 60 Co gamma stands out among the used radiation sources on commercial facilities. lt is used to optimize this process with many dose mapping tests. The objective of this work is to develop a software to simulate the doses in 60 Co gamma irradiation systems. lt can be used to optimize a process on the project stage of a facility and to make viability studies for new applications in installations already set up. The validation of this software was done comparing the simulation results with the dosimetry data of an operating irradiation plant. The flexibility of the software was verified with extra dosimetry tests performed in another sterilization facility. (author)

The advanced software development workstation project

Science.gov (United States)

Fridge, Ernest M., III; Pitman, Charles L.

1991-01-01

The Advanced Software Development Workstation (ASDW) task is researching and developing the technologies required to support Computer Aided Software Engineering (CASE) with the emphasis on those advanced methods, tools, and processes that will be of benefit to support all NASA programs. Immediate goals are to provide research and prototype tools that will increase productivity, in the near term, in projects such as the Software Support Environment (SSE), the Space Station Control Center (SSCC), and the Flight Analysis and Design System (FADS) which will be used to support the Space Shuttle and Space Station Freedom. Goals also include providing technology for development, evolution, maintenance, and operations. The technologies under research and development in the ASDW project are targeted to provide productivity enhancements during the software life cycle phase of enterprise and information system modeling, requirements generation and analysis, system design and coding, and system use and maintenance. On-line user's guides will assist users in operating the developed information system with knowledge base expert assistance.

Integrating Usability Evaluations into the Software Development Process

DEFF Research Database (Denmark)

Lizano, Fulvio

as relevant and strategic human–computer interaction (HCI) activities in the software development process, there are obstacles that limit the complete, effective and efficient integration of this kind of testing into the software development process. Two main obstacles are the cost of usability evaluations...... and the software developers' resistance to accepting users’ opinions regarding the lack of usability in their software systems. The ‘cost obstacle’ refers to the constraint of conducting usability evaluations in the software process due to the significant amount of resources required by this type of testing. Some......This thesis addresses the integration of usability evaluations into the software development process. The integration here is contextualized in terms of how to include usability evaluation as an activity in the software development lifecycle. Even though usability evaluations are considered...

Discovering Software License Constraints : Identifying a Binary’s Sources by Tracing Build Processes

NARCIS (Netherlands)

Van der Burg, S.; Davies, J.; Dolstra, E.; German, D.M.; Hemel, A.

2012-01-01

With the current proliferation of open source software components, intellectual property in general, and copyright law in particular, has become a critical non-functional requirement for software systems. A key problem in license compliance engineering is that the legal constraints on a product

Acquisition Regulations and Offshore Software Development: Implications for Cybersecurity of DOD Networks

Science.gov (United States)

2013-02-14

analysis and manipulation ( SCAM ). This is because source code is the only precise description of the behavior of the system.47 The DSB Task Force on...A, K, Krishnan M, Mukhopadhyay T. Contracts in Offshore Software Development: An Empirical Analysis. Management Science [serial online ]. December

The SCEC Broadband Platform: Open-Source Software for Strong Ground Motion Simulation and Validation

Science.gov (United States)

Silva, F.; Goulet, C. A.; Maechling, P. J.; Callaghan, S.; Jordan, T. H.

2016-12-01

The Southern California Earthquake Center (SCEC) Broadband Platform (BBP) is a carefully integrated collection of open-source scientific software programs that can simulate broadband (0-100 Hz) ground motions for earthquakes at regional scales. The BBP can run earthquake rupture and wave propagation modeling software to simulate ground motions for well-observed historical earthquakes and to quantify how well the simulated broadband seismograms match the observed seismograms. The BBP can also run simulations for hypothetical earthquakes. In this case, users input an earthquake location and magnitude description, a list of station locations, and a 1D velocity model for the region of interest, and the BBP software then calculates ground motions for the specified stations. The BBP scientific software modules implement kinematic rupture generation, low- and high-frequency seismogram synthesis using wave propagation through 1D layered velocity structures, several ground motion intensity measure calculations, and various ground motion goodness-of-fit tools. These modules are integrated into a software system that provides user-defined, repeatable, calculation of ground-motion seismograms, using multiple alternative ground motion simulation methods, and software utilities to generate tables, plots, and maps. The BBP has been developed over the last five years in a collaborative project involving geoscientists, earthquake engineers, graduate students, and SCEC scientific software developers. The SCEC BBP software released in 2016 can be compiled and run on recent Linux and Mac OS X systems with GNU compilers. It includes five simulation methods, seven simulation regions covering California, Japan, and Eastern North America, and the ability to compare simulation results against empirical ground motion models (aka GMPEs). The latest version includes updated ground motion simulation methods, a suite of new validation metrics and a simplified command line user interface.

A systematic approach for component-based software development

NARCIS (Netherlands)

Guareis de farias, Cléver; van Sinderen, Marten J.; Ferreira Pires, Luis

2000-01-01

Component-based software development enables the construction of software artefacts by assembling prefabricated, configurable and independently evolving building blocks, called software components. This paper presents an approach for the development of component-based software artefacts. This

Learning Human Aspects of Collaborative Software Development

Science.gov (United States)

Hadar, Irit; Sherman, Sofia; Hazzan, Orit

2008-01-01

Collaboration has become increasingly widespread in the software industry as systems have become larger and more complex, adding human complexity to the technological complexity already involved in developing software systems. To deal with this complexity, human-centric software development methods, such as Extreme Programming and other agile…

Estimating software development project size, using probabilistic ...

African Journals Online (AJOL)

Estimating software development project size, using probabilistic techniques. ... of managing the size of software development projects by Purchasers (Clients) and Vendors (Development ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Open source posturography.

Science.gov (United States)

Rey-Martinez, Jorge; Pérez-Fernández, Nicolás

2016-12-01

The proposed validation goal of 0.9 in intra-class correlation coefficient was reached with the results of this study. With the obtained results we consider that the developed software (RombergLab) is a validated balance assessment software. The reliability of this software is dependent of the used force platform technical specifications. Develop and validate a posturography software and share its source code in open source terms. Prospective non-randomized validation study: 20 consecutive adults underwent two balance assessment tests, six condition posturography was performed using a clinical approved software and force platform and the same conditions were measured using the new developed open source software using a low cost force platform. Intra-class correlation index of the sway area obtained from the center of pressure variations in both devices for the six conditions was the main variable used for validation. Excellent concordance between RombergLab and clinical approved force platform was obtained (intra-class correlation coefficient =0.94). A Bland and Altman graphic concordance plot was also obtained. The source code used to develop RombergLab was published in open source terms.

The Impact of Entry and Competition by Open Source Software on Innovation Activity

DEFF Research Database (Denmark)

Schröder, Philipp J.H.; Bitzer, Jürgen

2006-01-01

This chapter presents the stylized facts of open source software innovation and provides empirical evidence on the impact of increased competition by OSS on the innovative activity in the software industry. Furthermore, we introduce a simple formal model that captures the innovation impact of OSS...

Design for software a playbook for developers

CERN Document Server

Klimczak, Erik

2013-01-01

A unique resource to help software developers create a desirable user experience Today, top-flight software must feature a desirable user experience. This one-of-a-kind book creates a design process specifically for software, making it easy for developers who lack design background to create that compelling user experience. Appealing to both tech-savvy designers and creative-minded technologists, it establishes a hybrid discipline that will produce first-rate software. Illustrated in full color, it shows how to plan and visualize the design to create software that works on every l

COSINE software development based on code generation technology

International Nuclear Information System (INIS)

Ren Hao; Mo Wentao; Liu Shuo; Zhao Guang

2013-01-01

The code generation technology can significantly improve the quality and productivity of software development and reduce software development risk. At present, the code generator is usually based on UML model-driven technology, which can not satisfy the development demand of nuclear power calculation software. The feature of scientific computing program was analyzed and the FORTRAN code generator (FCG) based on C# was developed in this paper. FCG can generate module variable definition FORTRAN code automatically according to input metadata. FCG also can generate memory allocation interface for dynamic variables as well as data access interface. FCG was applied to the core and system integrated engine for design and analysis (COSINE) software development. The result shows that FCG can greatly improve the development efficiency of nuclear power calculation software, and reduce the defect rate of software development. (authors)

Strengthening Software Authentication with the ROSE Software Suite

International Nuclear Information System (INIS)

White, G

2006-01-01

Many recent nonproliferation and arms control software projects include a software authentication regime. These include U.S. Government-sponsored projects both in the United States and in the Russian Federation (RF). This trend toward requiring software authentication is only accelerating. Demonstrating assurance that software performs as expected without hidden ''backdoors'' is crucial to a project's success. In this context, ''authentication'' is defined as determining that a software package performs only its intended purpose and performs said purpose correctly and reliably over the planned duration of an agreement. In addition to visual inspections by knowledgeable computer scientists, automated tools are needed to highlight suspicious code constructs, both to aid visual inspection and to guide program development. While many commercial tools are available for portions of the authentication task, they are proprietary and not extensible. An open-source, extensible tool can be customized to the unique needs of each project (projects can have both common and custom rules to detect flaws and security holes). Any such extensible tool has to be based on a complete language compiler. ROSE is precisely such a compiler infrastructure developed within the Department of Energy (DOE) and targeted at the optimization of scientific applications and user-defined libraries within large-scale applications (typically applications of a million lines of code). ROSE is a robust, source-to-source analysis and optimization infrastructure currently addressing large, million-line DOE applications in C and C++ (handling the full C, C99, C++ languages and with current collaborations to support Fortran90). We propose to extend ROSE to address a number of security-specific requirements, and apply it to software authentication for nonproliferation and arms control projects

Methodology and Toolset for Model Verification, Hardware/Software co-simulation, Performance Optimisation and Customisable Source-code generation

DEFF Research Database (Denmark)

Berger, Michael Stübert; Soler, José; Yu, Hao

2013-01-01

The MODUS project aims to provide a pragmatic and viable solution that will allow SMEs to substantially improve their positioning in the embedded-systems development market. The MODUS tool will provide a model verification and Hardware/Software co-simulation tool (TRIAL) and a performance...... optimisation and customisable source-code generation tool (TUNE). The concept is depicted in automated modelling and optimisation of embedded-systems development. The tool will enable model verification by guiding the selection of existing open-source model verification engines, based on the automated analysis...

Resource utilization during software development

Science.gov (United States)

Zelkowitz, Marvin V.

1988-01-01

This paper discusses resource utilization over the life cycle of software development and discusses the role that the current 'waterfall' model plays in the actual software life cycle. Software production in the NASA environment was analyzed to measure these differences. The data from 13 different projects were collected by the Software Engineering Laboratory at NASA Goddard Space Flight Center and analyzed for similarities and differences. The results indicate that the waterfall model is not very realistic in practice, and that as technology introduces further perturbations to this model with concepts like executable specifications, rapid prototyping, and wide-spectrum languages, we need to modify our model of this process.

Development of Emittance Analysis Software for Ion Beam Characterization

International Nuclear Information System (INIS)

Padilla, M.J.; Liu, Yuan

2007-01-01

Transverse beam emittance is a crucial property of charged particle beams that describes their angular and spatial spread. It is a figure of merit frequently used to determine the quality of ion beams, the compatibility of an ion beam with a given beam transport system, and the ability to suppress neighboring isotopes at on-line mass separator facilities. Generally, a high-quality beam is characterized by a small emittance. In order to determine and improve the quality of ion beams used at the Holifield Radioactive Ion Beam Facility (HRIBF) for nuclear physics and nuclear astrophysics research, the emittances of the ion beams are measured at the off-line Ion Source Test Facilities. In this project, emittance analysis software was developed to perform various data processing tasks for noise reduction, to evaluate root-mean-square emittance, Twiss parameters, and area emittance of different beam fractions. The software also provides 2D and 3D graphical views of the emittance data, beam profiles, emittance contours, and RMS. Noise exclusion is essential for accurate determination of beam emittance values. A Self-Consistent, Unbiased Elliptical Exclusion (SCUBEEx) method is employed. Numerical data analysis techniques such as interpolation and nonlinear fitting are also incorporated into the software. The software will provide a simplified, fast tool for comprehensive emittance analysis. The main functions of the software package have been completed. In preliminary tests with experimental emittance data, the analysis results using the software were shown to be accurate

DEVELOPMENT OF EMITTANCE ANALYSIS SOFTWARE FOR ION BEAM CHARACTERIZATION

Energy Technology Data Exchange (ETDEWEB)

Padilla, M. J.; Liu, Y.

2007-01-01

Transverse beam emittance is a crucial property of charged particle beams that describes their angular and spatial spread. It is a fi gure of merit frequently used to determine the quality of ion beams, the compatibility of an ion beam with a given beam transport system, and the ability to suppress neighboring isotopes at on-line mass separator facilities. Generally a high quality beam is characterized by a small emittance. In order to determine and improve the quality of ion beams used at the Holifi eld Radioactive Ion beam Facility (HRIBF) for nuclear physics and nuclear astrophysics research, the emittances of the ion beams are measured at the off-line Ion Source Test Facilities. In this project, emittance analysis software was developed to perform various data processing tasks for noise reduction, to evaluate root-mean-square emittance, Twiss parameters, and area emittance of different beam fractions. The software also provides 2D and 3D graphical views of the emittance data, beam profi les, emittance contours, and RMS. Noise exclusion is essential for accurate determination of beam emittance values. A Self-Consistent, Unbiased Elliptical Exclusion (SCUBEEx) method is employed. Numerical data analysis techniques such as interpolation and nonlinear fi tting are also incorporated into the software. The software will provide a simplifi ed, fast tool for comprehensive emittance analysis. The main functions of the software package have been completed. In preliminary tests with experimental emittance data, the analysis results using the software were shown to be accurate.

Open-Source Development of the Petascale Reactive Flow and Transport Code PFLOTRAN

Science.gov (United States)

Hammond, G. E.; Andre, B.; Bisht, G.; Johnson, T.; Karra, S.; Lichtner, P. C.; Mills, R. T.

2013-12-01

Open-source software development has become increasingly popular in recent years. Open-source encourages collaborative and transparent software development and promotes unlimited free redistribution of source code to the public. Open-source development is good for science as it reveals implementation details that are critical to scientific reproducibility, but generally excluded from journal publications. In addition, research funds that would have been spent on licensing fees can be redirected to code development that benefits more scientists. In 2006, the developers of PFLOTRAN open-sourced their code under the U.S. Department of Energy SciDAC-II program. Since that time, the code has gained popularity among code developers and users from around the world seeking to employ PFLOTRAN to simulate thermal, hydraulic, mechanical and biogeochemical processes in the Earth's surface/subsurface environment. PFLOTRAN is a massively-parallel subsurface reactive multiphase flow and transport simulator designed from the ground up to run efficiently on computing platforms ranging from the laptop to leadership-class supercomputers, all from a single code base. The code employs domain decomposition for parallelism and is founded upon the well-established and open-source parallel PETSc and HDF5 frameworks. PFLOTRAN leverages modern Fortran (i.e. Fortran 2003-2008) in its extensible object-oriented design. The use of this progressive, yet domain-friendly programming language has greatly facilitated collaboration in the code's software development. Over the past year, PFLOTRAN's top-level data structures were refactored as Fortran classes (i.e. extendible derived types) to improve the flexibility of the code, ease the addition of new process models, and enable coupling to external simulators. For instance, PFLOTRAN has been coupled to the parallel electrical resistivity tomography code E4D to enable hydrogeophysical inversion while the same code base can be used as a third

Leveraging Open Source Software to Create Technical Animations of Scientific Data

National Research Council Canada - National Science Library

Vines, John M

2006-01-01

.... Army Research Laboratory spends tens of thousands of dollars annually for software licenses for packages such as Maya, Houdini, and 3D Studio Max, while in many instances, an open source package...

Falcon: a highly flexible open-source software for closed-loop neuroscience.

Science.gov (United States)

Ciliberti, Davide; Kloosterman, Fabian

2017-08-01

Closed-loop experiments provide unique insights into brain dynamics and function. To facilitate a wide range of closed-loop experiments, we created an open-source software platform that enables high-performance real-time processing of streaming experimental data. We wrote Falcon, a C++ multi-threaded software in which the user can load and execute an arbitrary processing graph. Each node of a Falcon graph is mapped to a single thread and nodes communicate with each other through thread-safe buffers. The framework allows for easy implementation of new processing nodes and data types. Falcon was tested both on a 32-core and a 4-core workstation. Streaming data was read from either a commercial acquisition system (Neuralynx) or the open-source Open Ephys hardware, while closed-loop TTL pulses were generated with a USB module for digital output. We characterized the round-trip latency of our Falcon-based closed-loop system, as well as the specific latency contribution of the software architecture, by testing processing graphs with up to 32 parallel pipelines and eight serial stages. We finally deployed Falcon in a task of real-time detection of population bursts recorded live from the hippocampus of a freely moving rat. On Neuralynx hardware, round-trip latency was well below 1 ms and stable for at least 1 h, while on Open Ephys hardware latencies were below 15 ms. The latency contribution of the software was below 0.5 ms. Round-trip and software latencies were similar on both 32- and 4-core workstations. Falcon was used successfully to detect population bursts online with ~40 ms average latency. Falcon is a novel open-source software for closed-loop neuroscience. It has sub-millisecond intrinsic latency and gives the experimenter direct control of CPU resources. We envisage Falcon to be a useful tool to the neuroscientific community for implementing a wide variety of closed-loop experiments, including those requiring use of complex data structures and real

Falcon: a highly flexible open-source software for closed-loop neuroscience

Science.gov (United States)

Ciliberti, Davide; Kloosterman, Fabian

2017-08-01

Objective. Closed-loop experiments provide unique insights into brain dynamics and function. To facilitate a wide range of closed-loop experiments, we created an open-source software platform that enables high-performance real-time processing of streaming experimental data. Approach. We wrote Falcon, a C++ multi-threaded software in which the user can load and execute an arbitrary processing graph. Each node of a Falcon graph is mapped to a single thread and nodes communicate with each other through thread-safe buffers. The framework allows for easy implementation of new processing nodes and data types. Falcon was tested both on a 32-core and a 4-core workstation. Streaming data was read from either a commercial acquisition system (Neuralynx) or the open-source Open Ephys hardware, while closed-loop TTL pulses were generated with a USB module for digital output. We characterized the round-trip latency of our Falcon-based closed-loop system, as well as the specific latency contribution of the software architecture, by testing processing graphs with up to 32 parallel pipelines and eight serial stages. We finally deployed Falcon in a task of real-time detection of population bursts recorded live from the hippocampus of a freely moving rat. Main results. On Neuralynx hardware, round-trip latency was well below 1 ms and stable for at least 1 h, while on Open Ephys hardware latencies were below 15 ms. The latency contribution of the software was below 0.5 ms. Round-trip and software latencies were similar on both 32- and 4-core workstations. Falcon was used successfully to detect population bursts online with ~40 ms average latency. Significance. Falcon is a novel open-source software for closed-loop neuroscience. It has sub-millisecond intrinsic latency and gives the experimenter direct control of CPU resources. We envisage Falcon to be a useful tool to the neuroscientific community for implementing a wide variety of closed-loop experiments, including those

Challenges of Implementing Free and Open Source Software (FOSS): Evidence from the Indian Educational Setting

Science.gov (United States)

Thankachan, Briju; Moore, David Richard

2017-01-01

The use of Free and Open Source Software (FOSS), a subset of Information and Communication Technology (ICT), can reduce the cost of purchasing software. Despite the benefit in the initial purchase price of software, deploying software requires total cost that goes beyond the initial purchase price. Total cost is a silent issue of FOSS and can only…

Efficient radiologic reading environment by using an open-source macro program as connection software.

Science.gov (United States)

Lee, Young Han

2012-01-01

The objectives are (1) to introduce an easy open-source macro program as connection software and (2) to illustrate the practical usages in radiologic reading environment by simulating the radiologic reading process. The simulation is a set of radiologic reading process to do a practical task in the radiologic reading room. The principal processes are: (1) to view radiologic images on the Picture Archiving and Communicating System (PACS), (2) to connect the HIS/EMR (Hospital Information System/Electronic Medical Record) system, (3) to make an automatic radiologic reporting system, and (4) to record and recall information of interesting cases. This simulation environment was designed by using open-source macro program as connection software. The simulation performed well on the Window-based PACS workstation. Radiologists practiced the steps of the simulation comfortably by utilizing the macro-powered radiologic environment. This macro program could automate several manual cumbersome steps in the radiologic reading process. This program successfully acts as connection software for the PACS software, EMR/HIS, spreadsheet, and other various input devices in the radiologic reading environment. A user-friendly efficient radiologic reading environment could be established by utilizing open-source macro program as connection software. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Efficient radiologic reading environment by using an open-source macro program as connection software

International Nuclear Information System (INIS)

Lee, Young Han

2012-01-01

Purpose: The objectives are (1) to introduce an easy open-source macro program as connection software and (2) to illustrate the practical usages in radiologic reading environment by simulating the radiologic reading process. Materials and methods: The simulation is a set of radiologic reading process to do a practical task in the radiologic reading room. The principal processes are: (1) to view radiologic images on the Picture Archiving and Communicating System (PACS), (2) to connect the HIS/EMR (Hospital Information System/Electronic Medical Record) system, (3) to make an automatic radiologic reporting system, and (4) to record and recall information of interesting cases. This simulation environment was designed by using open-source macro program as connection software. Results: The simulation performed well on the Window-based PACS workstation. Radiologists practiced the steps of the simulation comfortably by utilizing the macro-powered radiologic environment. This macro program could automate several manual cumbersome steps in the radiologic reading process. This program successfully acts as connection software for the PACS software, EMR/HIS, spreadsheet, and other various input devices in the radiologic reading environment. Conclusion: A user-friendly efficient radiologic reading environment could be established by utilizing open-source macro program as connection software.

Social.Water--Open Source Citizen Science Software for CrowdHydrology

Science.gov (United States)

Fienen, M. N.; Lowry, C.

2013-12-01

CrowdHydrology is a crowd-sourced citizen science project in which passersby near streams are encouraged to read a gage and send an SMS (text) message with the water level to a number indicated on a sign. The project was initially started using free services such as Google Voice, Gmail, and Google Maps to acquire and present the data on the internet. Social.Water is open-source software, using Python and JavaScript, that automates the acquisition, categorization, and presentation of the data. Open-source objectives pervade both the project and the software as the code is hosted at Github, only free scripting codes are used, and any person or organization can install a gage and join the CrowdHydrology network. In the first year, 10 sites were deployed in upstate New York, USA. In the second year, expansion to 44 sites throughout the upper Midwest USA was achieved. Comparison with official USGS and academic measurements have shown low error rates. Citizen participation varies greatly from site to site, so surveys or other social information is sought for insight into why some sites experience higher rates of participation than others.

Enhancing Software Engineering Education through Open Source Projects: Four Years of Students' Perspectives

NARCIS (Netherlands)

Papadopoulos, P.M.; Stamelos, I.G.; Meiszner, A.

2015-01-01

This paper presents the results after four years of running of an instructional method that utilizes free/libre open source software (FLOSS) projects as tools for teaching software engineering in formal education. In the last four academic years, a total of 408 juniors majoring in Informatics (in a

Software Engineering Principles for Courseware Development.

Science.gov (United States)

Magel, Kenneth

1980-01-01

Courseware (computer based curriculum materials) development should follow the lessons learned by software engineers. The most important of 28 principles of software development presented here include a stress on human readability, the importance of early planning and analysis, the need for independent evaluation, and the need to be flexible.…

Open source software and crowdsourcing for energy analysis

International Nuclear Information System (INIS)

Bazilian, Morgan; Rice, Andrew; Rotich, Juliana; Howells, Mark; DeCarolis, Joseph; Macmillan, Stuart; Brooks, Cameron; Bauer, Florian; Liebreich, Michael

2012-01-01

Informed energy decision making requires effective software, high-quality input data, and a suitably trained user community. Developing these resources can be expensive and time consuming. Even when data and tools are intended for public re-use they often come with technical, legal, economic and social barriers that make them difficult to adopt, adapt and combine for use in new contexts. We focus on the promise of open, publically accessible software and data as well as crowdsourcing techniques to develop robust energy analysis tools that can deliver crucial, policy-relevant insight, particularly in developing countries, where planning resources are highly constrained—and the need to adapt these resources and methods to the local context is high. We survey existing research, which argues that these techniques can produce high-quality results, and also explore the potential role that linked, open data can play in both supporting the modelling process and in enhancing public engagement with energy issues. - Highlights: ► We focus on the promise of open, publicly accessible software and data. ► These emerging techniques can produce high-quality results for energy analysis. ► Developing economies require new techniques for energy planning.

Factors negatively influencing knowledge sharing in software development

Directory of Open Access Journals (Sweden)

Lucas T. Khoza

2017-07-01

Objective: This study seeks to identify factors that negatively influence knowledge sharing in software development in the developing country context. Method: Expert sampling as a subcategory of purposive sampling was employed to extract information, views and opinions from experts in the field of information and communication technology, more specifically from those who are involved in software development projects. Four Johannesburg-based software developing organisations listed on the Johannesburg Stock Exchange (JSE, South Africa, participated in this research study. Quantitative data were collected using an online questionnaire with closed-ended questions. Results: Findings of this research reveal that job security, motivation, time constraints, physiological factors, communication, resistance to change and rewards are core factors negatively influencing knowledge sharing in software developing organisations. Conclusions: Improved understanding of factors negatively influencing knowledge sharing is expected to assist software developing organisations in closing the gap for software development projects failing to meet the triple constraint of time, cost and scope.

Methodology for economic evaluation of software development projects

International Nuclear Information System (INIS)

Witte, D.M.

1990-01-01

Many oil and gas exploration and production companies develop computer software in-house or with contract programmers to support their exploration activities. Software development projects compete for funding with exploration and development projects, though most companies lack valid comparison measures for the two types of projects. This paper presents a methodology of pro form a cash flow analysis for software development proposals intended for internal use. This methodology, based on estimates of development and support costs, exploration benefits, and probability of successful development and implementation, can be used to compare proposed software development projects directly with competing exploration proposals

SOURCE 1ST 2.0: development and beta testing

International Nuclear Information System (INIS)

Barber, D.H.; Iglesias, F.C.; Hoang, Y.; Dickson, L.W.; Dickson, R.S.; Richards, M.J.; Gibb, R.A.

1999-01-01

SOURCE 1ST 2.0 is the Industry Standard fission product release code that is being developed by Ontario Power Generation, New Brunswick Power, Hydro-Quebec, and Atomic Energy of Canada Ltd. This paper is a report on recent progress on requirement specification, code development, and module verification and validation activities. The theoretical basis for each model in the code is described in a module Software Theory Manual. The development of SOURCE IST 2.0 has required code design decisions about how to implement the software requirements. Development and module testing of the β1 release of SOURCE IST 2.0 (released in July 1999) have led to some interesting insights into fission product release modelling. The beta testing process has allowed code developers and analysts to refine the software requirements for the code. The need to verify physical reference data has guided some decisions on the code and data structure design. Examples of these design decisions are provided. Module testing, and verification and validation activities are discussed. These activities include code-targeted testing, stress testing, code inspection, comparison of code with requirements, and comparison of code results with independent algebraic, numerical, or semi-algebraic calculations. The list of isotopes to be modelled by SOURCE IST 2.0 provides an example of a subset of a reference data set. Isotopes are present on the list for a variety of reasons: personnel or public dose, equipment dose (for environmental qualification), fission rate and actinide modelling, or stable (or long-lived) targets for activation processes. To accommodate controlled changes to the isotope list, the isotope list and associated nuclear data are contained in a reference data file. The questions of multiple computing platforms, and of Year 2000 compliance have been addressed by programming rules for the code. By developing and testing modules on most of the different platforms on which the code is intended

Informed-Proteomics: open-source software package for top-down proteomics

Energy Technology Data Exchange (ETDEWEB)

Park, Jungkap; Piehowski, Paul D.; Wilkins, Christopher; Zhou, Mowei; Mendoza, Joshua; Fujimoto, Grant M.; Gibbons, Bryson C.; Shaw, Jared B.; Shen, Yufeng; Shukla, Anil K.; Moore, Ronald J.; Liu, Tao; Petyuk, Vladislav A.; Tolić, Nikola; Paša-Tolić, Ljiljana; Smith, Richard D.; Payne, Samuel H.; Kim, Sangtae

2017-08-07

Top-down proteomics involves the analysis of intact proteins. This approach is very attractive as it allows for analyzing proteins in their endogenous form without proteolysis, preserving valuable information about post-translation modifications, isoforms, proteolytic processing or their combinations collectively called proteoforms. Moreover, the quality of the top-down LC-MS/MS datasets is rapidly increasing due to advances in the liquid chromatography and mass spectrometry instrumentation and sample processing protocols. However, the top-down mass spectra are substantially more complex compare to the more conventional bottom-up data. To take full advantage of the increasing quality of the top-down LC-MS/MS datasets there is an urgent need to develop algorithms and software tools for confident proteoform identification and quantification. In this study we present a new open source software suite for top-down proteomics analysis consisting of an LC-MS feature finding algorithm, a database search algorithm, and an interactive results viewer. The presented tool along with several other popular tools were evaluated using human-in-mouse xenograft luminal and basal breast tumor samples that are known to have significant differences in protein abundance based on bottom-up analysis.

Usability challenges in an Ethiopian software development organization

DEFF Research Database (Denmark)

Teka, Degif; Dittrich, Yvonne; Kifle, Mesfin

2016-01-01

Usability and user centered design (UCD) are central to software development. In developing countries, the gap between IT development and the local use situation is larger than in western countries. However, usability is neither well addressed in software practice nor at the policy making level...... in Ethiopia. Software practitioners focus on functional requirements, meeting deadlines and budget. The software development industry in Ethiopia is in its early stage. The article aims at understanding usability practices in an Ethiopian software development company. Developers, system analysts, product...... configuration, their experience, cultural knowledge and common sense regarding the users' situation guided the design. Prototypes and fast delivery of working versions helped in getting user feedback even if early user focus proved to be a challenge as communication between developers and users suffered from...

Fundamentals of multicore software development

CERN Document Server

Pankratius, Victor; Tichy, Walter F

2011-01-01

With multicore processors now in every computer, server, and embedded device, the need for cost-effective, reliable parallel software has never been greater. By explaining key aspects of multicore programming, Fundamentals of Multicore Software Development helps software engineers understand parallel programming and master the multicore challenge. Accessible to newcomers to the field, the book captures the state of the art of multicore programming in computer science. It covers the fundamentals of multicore hardware, parallel design patterns, and parallel programming in C++, .NET, and Java. It

Understanding Acceptance of Software Metrics--A Developer Perspective

Science.gov (United States)

Umarji, Medha

2009-01-01

Software metrics are measures of software products and processes. Metrics are widely used by software organizations to help manage projects, improve product quality and increase efficiency of the software development process. However, metrics programs tend to have a high failure rate in organizations, and developer pushback is one of the sources…

FluxPyt: a Python-based free and open-source software for 13C-metabolic flux analyses.

Science.gov (United States)

Desai, Trunil S; Srivastava, Shireesh

2018-01-01

13 C-Metabolic flux analysis (MFA) is a powerful approach to estimate intracellular reaction rates which could be used in strain analysis and design. Processing and analysis of labeling data for calculation of fluxes and associated statistics is an essential part of MFA. However, various software currently available for data analysis employ proprietary platforms and thus limit accessibility. We developed FluxPyt, a Python-based truly open-source software package for conducting stationary 13 C-MFA data analysis. The software is based on the efficient elementary metabolite unit framework. The standard deviations in the calculated fluxes are estimated using the Monte-Carlo analysis. FluxPyt also automatically creates flux maps based on a template for visualization of the MFA results. The flux distributions calculated by FluxPyt for two separate models: a small tricarboxylic acid cycle model and a larger Corynebacterium glutamicum model, were found to be in good agreement with those calculated by a previously published software. FluxPyt was tested in Microsoft™ Windows 7 and 10, as well as in Linux Mint 18.2. The availability of a free and open 13 C-MFA software that works in various operating systems will enable more researchers to perform 13 C-MFA and to further modify and develop the package.

APERO, AN OPEN SOURCE BUNDLE ADJUSMENT SOFTWARE FOR AUTOMATIC CALIBRATION AND ORIENTATION OF SET OF IMAGES

Directory of Open Access Journals (Sweden)

M. Pierrot Deseilligny

2012-09-01

Full Text Available IGN has developed a set of photogrammetric tools, APERO and MICMAC, for computing 3D models from set of images. This software, developed initially for its internal needs are now delivered as open source code. This paper focuses on the presentation of APERO the orientation software. Compared to some other free software initiatives, it is probably more complex but also more complete, its targeted user is rather professionals (architects, archaeologist, geomophologist than people. APERO uses both computer vision approach for estimation of initial solution and photogrammetry for a rigorous compensation of the total error; it has a large library of parametric model of distortion allowing a precise modelization of all the kind of pinhole camera we know, including several model of fish-eye; there is also several tools for geo-referencing the result. The results are illustrated on various application, including the data-set of 3D-Arch workshop.

Modular Infrastructure for Rapid Flight Software Development

Science.gov (United States)

Pires, Craig

2010-01-01

This slide presentation reviews the use of modular infrastructure to assist in the development of flight software. A feature of this program is the use of model based approach for application unique software. A review of two programs that this approach was use on are: the development of software for Hover Test Vehicle (HTV), and Lunar Atmosphere and Dust Environment Experiment (LADEE).

A Survey of Usability Practices in Free/Libre/Open Source Software

Science.gov (United States)

Paul, Celeste Lyn

A review of case studies about usability in eight Free/Libre/Open Source Software (FLOSS) projects showed that an important issue regarding a usability initiative in the project was the lack of user research. User research is a key component in the user-centered design (UCD) process and a necessary step for creating usable products. Reasons why FLOSS projects suffered from a lack of user research included poor or unclear project leadership, cultural differences between developer and designers, and a lack of usability engineers. By identifying these critical issues, the FLOSS usability community can begin addressing problems in the efficacy of usability activities and work towards creating more usable FLOSS products.

A systematic literature review of open source software quality assessment models.

Science.gov (United States)

Adewumi, Adewole; Misra, Sanjay; Omoregbe, Nicholas; Crawford, Broderick; Soto, Ricardo

2016-01-01

Many open source software (OSS) quality assessment models are proposed and available in the literature. However, there is little or no adoption of these models in practice. In order to guide the formulation of newer models so they can be acceptable by practitioners, there is need for clear discrimination of the existing models based on their specific properties. Based on this, the aim of this study is to perform a systematic literature review to investigate the properties of the existing OSS quality assessment models by classifying them with respect to their quality characteristics, the methodology they use for assessment, and their domain of application so as to guide the formulation and development of newer models. Searches in IEEE Xplore, ACM, Science Direct, Springer and Google Search is performed so as to retrieve all relevant primary studies in this regard. Journal and conference papers between the year 2003 and 2015 were considered since the first known OSS quality model emerged in 2003. A total of 19 OSS quality assessment model papers were selected. To select these models we have developed assessment criteria to evaluate the quality of the existing studies. Quality assessment models are classified into five categories based on the quality characteristics they possess namely: single-attribute, rounded category, community-only attribute, non-community attribute as well as the non-quality in use models. Our study reflects that software selection based on hierarchical structures is found to be the most popular selection method in the existing OSS quality assessment models. Furthermore, we found that majority (47%) of the existing models do not specify any domain of application. In conclusion, our study will be a valuable contribution to the community and helps the quality assessment model developers in formulating newer models and also to the practitioners (software evaluators) in selecting suitable OSS in the midst of alternatives.

CDApps: integrated software for experimental planning and data processing at beamline B23, Diamond Light Source.

Science.gov (United States)

Hussain, Rohanah; Benning, Kristian; Javorfi, Tamas; Longo, Edoardo; Rudd, Timothy R; Pulford, Bill; Siligardi, Giuliano

2015-03-01

The B23 Circular Dichroism beamline at Diamond Light Source has been operational since 2009 and has seen visits from more than 200 user groups, who have generated large amounts of data. Based on the experience of overseeing the users' progress at B23, four key areas requiring the most assistance are identified: planning of experiments and note-keeping; designing titration experiments; processing and analysis of the collected data; and production of experimental reports. To streamline these processes an integrated software package has been developed and made available for the users. The subsequent article summarizes the main features of the software.

PyPedal, an open source software package for pedigree analysis

Science.gov (United States)

The open source software package PyPedal (http://pypedal.sourceforge.net/) was first released in 2002, and provided users with a set of simple tools for manipulating pedigrees. Its flexibility has been demonstrated by its used in a number of settings for large and small populations. After substantia...

Methodology of decreasing software complexity using ontology

Science.gov (United States)

DÄ browska-Kubik, Katarzyna

2015-09-01

In this paper a model of web application`s source code, based on the OSD ontology (Ontology for Software Development), is proposed. This model is applied to implementation and maintenance phase of software development process through the DevOntoCreator tool [5]. The aim of this solution is decreasing software complexity of that source code, using many different maintenance techniques, like creation of documentation, elimination dead code, cloned code or bugs, which were known before [1][2]. Due to this approach saving on software maintenance costs of web applications will be possible.

Free/open source software: a study of some applications for scientific data analysis of nuclear experiments

Energy Technology Data Exchange (ETDEWEB)

Menezes, Mario Olimpio de [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)]. E-mail: mario@ipen.br; mo.menezes@gmail.com

2005-07-01

Free/Open Source Software (FOSS) has been used in science long before the formal social movement known as 'Free Software/Open Source Software' came in to existence. After the Personal Computer (PC) boom in the 80s, commercial closed source software became widely available to scientists for data analysis in this platform. In this paper, we study some high quality FOSS, available also for free, that can be used for complex data analysis tasks. We show the results and data analysis process, aiming to expose the high quality and highly productive ways of both results and processes, while highlighting the different approach used in some of the FOSS. We show that scientists have today in FOSS a viable, high quality alternative to commercial closed source software which, besides being ready to use, also offer the possibility of great customization or extension to fit very particular needs of many fields of scientific data analysis. Among the FOSS, we study in this paper GNU Octave and SCILAB - free alternatives to MATLAB; Gnuplot - free alternative to ORIGIN-like software. We also show that scientists have invaluable resources in modern FOSS programming languages such as Python, and Perl, that can be used both to do data analysis and manipulation, allowing very complex tasks to be done automatically after some few lines of easy programming. (author)

Free/open source software: a study of some applications for scientific data analysis of nuclear experiments

International Nuclear Information System (INIS)

Menezes, Mario Olimpio de

2005-01-01

Free/Open Source Software (FOSS) has been used in science long before the formal social movement known as 'Free Software/Open Source Software' came in to existence. After the Personal Computer (PC) boom in the 80s, commercial closed source software became widely available to scientists for data analysis in this platform. In this paper, we study some high quality FOSS, available also for free, that can be used for complex data analysis tasks. We show the results and data analysis process, aiming to expose the high quality and highly productive ways of both results and processes, while highlighting the different approach used in some of the FOSS. We show that scientists have today in FOSS a viable, high quality alternative to commercial closed source software which, besides being ready to use, also offer the possibility of great customization or extension to fit very particular needs of many fields of scientific data analysis. Among the FOSS, we study in this paper GNU Octave and SCILAB - free alternatives to MATLAB; Gnuplot - free alternative to ORIGIN-like software. We also show that scientists have invaluable resources in modern FOSS programming languages such as Python, and Perl, that can be used both to do data analysis and manipulation, allowing very complex tasks to be done automatically after some few lines of easy programming. (author)

Development of a software package for solid-angle calculations using the Monte Carlo method