Physics-Based Hazard Assessment for Critical Structures Near Large Earthquake Sources

Science.gov (United States)

Hutchings, L.; Mert, A.; Fahjan, Y.; Novikova, T.; Golara, A.; Miah, M.; Fergany, E.; Foxall, W.

2017-09-01

We argue that for critical structures near large earthquake sources: (1) the ergodic assumption, recent history, and simplified descriptions of the hazard are not appropriate to rely on for earthquake ground motion prediction and can lead to a mis-estimation of the hazard and risk to structures; (2) a physics-based approach can address these issues; (3) a physics-based source model must be provided to generate realistic phasing effects from finite rupture and model near-source ground motion correctly; (4) wave propagations and site response should be site specific; (5) a much wider search of possible sources of ground motion can be achieved computationally with a physics-based approach; (6) unless one utilizes a physics-based approach, the hazard and risk to structures has unknown uncertainties; (7) uncertainties can be reduced with a physics-based approach, but not with an ergodic approach; (8) computational power and computer codes have advanced to the point that risk to structures can be calculated directly from source and site-specific ground motions. Spanning the variability of potential ground motion in a predictive situation is especially difficult for near-source areas, but that is the distance at which the hazard is the greatest. The basis of a "physical-based" approach is ground-motion syntheses derived from physics and an understanding of the earthquake process. This is an overview paper and results from previous studies are used to make the case for these conclusions. Our premise is that 50 years of strong motion records is insufficient to capture all possible ranges of site and propagation path conditions, rupture processes, and spatial geometric relationships between source and site. Predicting future earthquake scenarios is necessary; models that have little or no physical basis but have been tested and adjusted to fit available observations can only "predict" what happened in the past, which should be considered description as opposed to prediction

Municipal solid waste source-separated collection in China: A comparative analysis

International Nuclear Information System (INIS)

Tai Jun; Zhang Weiqian; Che Yue; Feng Di

2011-01-01

A pilot program focusing on municipal solid waste (MSW) source-separated collection was launched in eight major cities throughout China in 2000. Detailed investigations were carried out and a comprehensive system was constructed to evaluate the effects of the eight-year implementation in those cities. This paper provides an overview of different methods of collection, transportation, and treatment of MSW in the eight cities; as well as making a comparative analysis of MSW source-separated collection in China. Information about the quantity and composition of MSW shows that the characteristics of MSW are similar, which are low calorific value, high moisture content and high proportion of organisms. Differences which exist among the eight cities in municipal solid waste management (MSWM) are presented in this paper. Only Beijing and Shanghai demonstrated a relatively effective result in the implementation of MSW source-separated collection. While the six remaining cities result in poor performance. Considering the current status of MSWM, source-separated collection should be a key priority. Thus, a wider range of cities should participate in this program instead of merely the eight pilot cities. It is evident that an integrated MSWM system is urgently needed. Kitchen waste and recyclables are encouraged to be separated at the source. Stakeholders involved play an important role in MSWM, thus their responsibilities should be clearly identified. Improvement in legislation, coordination mechanisms and public education are problematic issues that need to be addressed.

Collective Efficacy in Sports and Physical Activities: Perceived Emotional Synchrony and Shared Flow

Science.gov (United States)

Zumeta, Larraitz N.; Oriol, Xavier; Telletxea, Saioa; Amutio, Alberto; Basabe, Nekane

2016-01-01

This cross-sectional study analyzes the relationship between collective efficacy and two psychosocial processes involved in collective sport-physical activities. It argues that in-group identification and fusion with the group will affect collective efficacy (CE). A sample of 276 university students answered different scales regarding their participation in collective physical and sport activities. Multiple-mediation analyses showed that shared flow and perceived emotional synchrony mediate the relationship between in-group identification and CE, whereas the relationship between identity fusion and CE was only mediated by perceived emotional synchrony. Results suggest that both psychosocial processes explain the positive effects of in-group identification and identity fusion with the group in collective efficacy. Specifically, the role of perceived emotional synchrony in explaining the positive effects of participation in collective sport-physical activities is underlined. In sum, this study highlights the utility of collective actions and social identities to explain the psychosocial processes related to collective efficacy in physical and sports activities. Finally, practical implications are discussed. PMID:26779077

THE SPALLATION NEUTRON SOURCE PROJECT - PHYSICAL CHALLENGES.

Energy Technology Data Exchange (ETDEWEB)

WEI,J.

2002-06-03

The Spallation Neutron Source (SNS) is designed to reach an average proton beam power of 1.4 MW for pulsed neutron production. This paper summarizes design aspects and physical challenges to the project.

Physics Challenges for ERL Light Sources

Energy Technology Data Exchange (ETDEWEB)

Lia Merminga

2004-07-01

We present an overview of the physics challenges encountered in the design and operation of Energy Recovering Linac (ERL) based light sources. These challenges include the generation and preservation of low emittance, high-average current beams, manipulating and preserving the transverse and longitudinal phase space, control of the multipass beam breakup instability, efficient extraction of higher order mode power and RF control and stability of the superconducting cavities. These key R&D issues drive the design and technology choices for proposed ERL light sources. Simulations and calculations of these processes will be presented and compared with experimental data obtained at the Jefferson Lab FEL Upgrade, a 10 mA ERL light source presently in commissioning, and during a 1 GeV demonstration of energy recovery at CEBAF.

Sources for comparative studies of placentation I. Embryological collections

DEFF Research Database (Denmark)

Carter, Anthony Michael

2008-01-01

A rich source of material for comparative studies of the placenta is the collections made by pioneers in the field such as H.W. Mossman, A.A.W. Hubrecht and J.P. Hill. This overview gives a brief description of collections known to be available and information on how each can be accessed. Include...... are some of the major series of human and animal embryos, such as the Boyd and Carnegie collections, as these also house placental material....

Collective efficacy in sports and physical activities: perceived emotional synchrony and shared flow

Directory of Open Access Journals (Sweden)

Larraitz Nerea Zumeta

2016-01-01

Full Text Available This cross-sectional study analyzes the relationship between collective efficacy and two psychosocial processes involved in collective sport-physical activities. It argues that in-group identification and fusion with the group will affect collective efficacy (CE. A sample of 276 university students answered different scales regarding their participation in collective physical and sport activities. Multiple-mediation analyses showed that shared flow and perceived emotional synchrony mediate the relationship between in-group identification and CE, whereas the relationship between identity fusion and CE was only mediated by perceived emotional synchrony. Results suggest that both psychosocial processes explain the positive effects of in-group identification and identity fusion with the group in collective efficacy. Especially, the role of perceived emotional synchrony in explaining the positive effects of participation in collective sport-physical activities is underlined. In sum, this study remarks the utility of collective actions and social identities to explain the psychosocial processes related to collective efficacy in physical and sports activities. Finally, practical implications are discussed.

Physics and national socialism an anthology of primary sources

CERN Document Server

1996-01-01

This anthology of primary sources is a collection of 121 documents in English translation portraying the role of physics, both perceived and actual, in the Nazi state. These texts were written predominantly by influential German scientists, particularly physicists, both inside and outside Germany in the period from 1933 to 1945. The semipopular articles, private correspondence, and official memoranda selected for the volume reflect the contemporary developments in science as well as the change in political climate and working conditions after the National Socialists' rise to power. The extensive annotation is clearly distinguished from the original text, and the appendix provides an aid to the reader with biographical information on the more important figures and brief outlines of frequently mentioned institutions, journals and companies. The introduction surveys the latest results in the secondary literature.   ------    (…) the envisaged audience includes not only scholars and students of science, hist...

Physics Model-Based Scatter Correction in Multi-Source Interior Computed Tomography.

Science.gov (United States)

Gong, Hao; Li, Bin; Jia, Xun; Cao, Guohua

2018-02-01

Multi-source interior computed tomography (CT) has a great potential to provide ultra-fast and organ-oriented imaging at low radiation dose. However, X-ray cross scattering from multiple simultaneously activated X-ray imaging chains compromises imaging quality. Previously, we published two hardware-based scatter correction methods for multi-source interior CT. Here, we propose a software-based scatter correction method, with the benefit of no need for hardware modifications. The new method is based on a physics model and an iterative framework. The physics model was derived analytically, and was used to calculate X-ray scattering signals in both forward direction and cross directions in multi-source interior CT. The physics model was integrated to an iterative scatter correction framework to reduce scatter artifacts. The method was applied to phantom data from both Monte Carlo simulations and physical experimentation that were designed to emulate the image acquisition in a multi-source interior CT architecture recently proposed by our team. The proposed scatter correction method reduced scatter artifacts significantly, even with only one iteration. Within a few iterations, the reconstructed images fast converged toward the "scatter-free" reference images. After applying the scatter correction method, the maximum CT number error at the region-of-interests (ROIs) was reduced to 46 HU in numerical phantom dataset and 48 HU in physical phantom dataset respectively, and the contrast-noise-ratio at those ROIs increased by up to 44.3% and up to 19.7%, respectively. The proposed physics model-based iterative scatter correction method could be useful for scatter correction in dual-source or multi-source CT.

76 FR 1168 - Agency Information Collection Activities; Proposed Collection; Comment Request; Health and Diet...

Science.gov (United States)

2011-01-07

... Supplement will include: (1) Awareness and sources of information, (2) attitudes toward diet and physical... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0001] Agency Information Collection Activities; Proposed Collection; Comment Request; Health and Diet Survey...

Physical processes in EUV sources for microlithography

International Nuclear Information System (INIS)

Banine, V Y; Swinkels, G H P M; Koshelev, K N

2011-01-01

The source is an integral part of an extreme ultraviolet lithography (EUVL) tool. Such a source, as well as the EUVL tool, has to fulfil very high demands both technical and cost oriented. The EUVL tool operates at a wavelength of 13.5 nm, which requires the following new developments. - The light production mechanism changes from conventional lamps and lasers to relatively high-temperature emitting plasmas. - The light transport, mainly refractive for deep ultraviolet (DUV), should be reflective for EUV. - The source specifications as derived from the customer requirements on wafer throughput mean that the output EUV source power has to be hundreds of watts. This in its turn means that tens to hundreds of kilowatts of dissipated power has to be managed in a relatively small volume. - In order to keep lithography costs as low as possible, the lifetime of the components should be as long as possible and at least of the order of thousands of hours. This poses a challenge for the sources, namely how to design and manufacture components robust enough to withstand the intense environment of high heat dissipation, flows of several keV ions as well as the atomic and particular debris within the source vessel. - As with all lithography tools, the imaging requirements demand a narrow illumination bandwidth. Absorption of materials at EUV wavelengths is extreme with extinguishing lengths of the order of tens of nanometres, so the balance between high transmission and spectral purity requires careful engineering. All together, EUV lithography sources present technological challenges in various fields of physics such as plasma, optics and material science. These challenges are being tackled by the source manufacturers and investigated extensively in the research facilities around the world. An overview of the published results on the topic as well as the analyses of the physical processes behind the proposed solutions will be presented in this paper. (topical review)

A collection of problems for physics teaching

International Nuclear Information System (INIS)

Groeber, S; Jodl, H-J

2010-01-01

Problems are an important instrument for teachers to mediate physics content and for learners to adopt this content. This collection of problems is not only suited to traditional teaching and learning in lectures or student labs, but also to all kinds of new ways of teaching and learning, such as self-study, long-distance teaching, project-oriented learning and the use of remote labs/web experiments. We focus on Rutherford's scattering experiment, electron diffraction, Millikan's experiment and the use of pendulums to measure the dependence of gravitational acceleration on latitude. The collection contains about 50 problems with 160 subtasks and solutions, altogether 100 pages. Structure, content, range and the added value of the problems are described. The whole collection can be downloaded for free from http://rcl.physik.uni-kl.de.

Quantifying the isotopic composition of NOx emission sources: An analysis of collection methods

Science.gov (United States)

Fibiger, D.; Hastings, M.

2012-04-01

We analyze various collection methods for nitrogen oxides, NOx (NO2 and NO), used to evaluate the nitrogen isotopic composition (δ15N). Atmospheric NOx is a major contributor to acid rain deposition upon its conversion to nitric acid; it also plays a significant role in determining air quality through the production of tropospheric ozone. NOx is released by both anthropogenic (fossil fuel combustion, biomass burning, aircraft emissions) and natural (lightning, biogenic production in soils) sources. Global concentrations of NOx are rising because of increased anthropogenic emissions, while natural source emissions also contribute significantly to the global NOx burden. The contributions of both natural and anthropogenic sources and their considerable variability in space and time make it difficult to attribute local NOx concentrations (and, thus, nitric acid) to a particular source. Several recent studies suggest that variability in the isotopic composition of nitric acid deposition is related to variability in the isotopic signatures of NOx emission sources. Nevertheless, the isotopic composition of most NOx sources has not been thoroughly constrained. Ultimately, the direct capture and quantification of the nitrogen isotopic signatures of NOx sources will allow for the tracing of NOx emissions sources and their impact on environmental quality. Moreover, this will provide a new means by which to verify emissions estimates and atmospheric models. We present laboratory results of methods used for capturing NOx from air into solution. A variety of methods have been used in field studies, but no independent laboratory verification of the efficiencies of these methods has been performed. When analyzing isotopic composition, it is important that NOx be collected quantitatively or the possibility of fractionation must be constrained. We have found that collection efficiency can vary widely under different conditions in the laboratory and fractionation does not vary

CAS Accelerator Physics (Ion Sources) in Slovakia

CERN Multimedia

CAS School

2012-01-01

The CERN Accelerator School (CAS) and the Slovak University of Technology jointly organised a specialised course on ion sources, held at the Hotel Senec, Senec, Slovakia, from 29 May to 8 June, 2012.   Following some background lectures on accelerator physics and the fundamental processes of atomic and plasma physics, the course covered a wide range of topics related to ion sources and highlighted the latest developments in the field. Realistic case studies and topical seminars completed the programme. The school was very successful, with 69 participants representing 25 nationalities. Feedback from the participants was extremely positive, reflecting the high standard of the lectures. The case studies were performed with great enthusiasm and produced some excellent results. In addition to the academic programme, the participants were able to take part in a one-day excursion consisting of a guided tour of Bratislava and free time. A welcome event was held at the Hotel Senec, with s...

Open-Source Java for Teaching Computational Physics

Science.gov (United States)

Wolfgang, Christian; Gould, Harvey; Gould, Joshua; Tobochnik, Jan

2001-11-01

The switch from procedural to object-oriented (OO) programming has produced dramatic changes in professional software design. OO techniques have not, however, been widely adopted in computational physics. Although most physicists are familiar with procedural languages such as Fortran, few physicists have formal training in computer science and few therefore have made the switch to OO programming. The continued use of procedural languages in education is due, in part, to the lack of up-to-date curricular materials that combine current computational physics research topics with an OO framework. This talk describes an Open-Source curriculum development project to produce such material. Examples will be presented that show how OO techniques can be used to encapsulate the relevant Physics, the analysis, and the associated numerical methods.

Dispersal from deep ocean sources: physical and related scientific processes

International Nuclear Information System (INIS)

Robinson, A.R.; Kupferman, S.L.

1985-02-01

This report presents the results of the workshop ''Dispersal from Deep Ocean Sources: Physical and Related Scientific Processes,'' together with subsequent developments and syntheses of the material discussed there. The project was undertaken to develop usable predictive descriptions of dispersal from deep oceanic sources. Relatively simple theoretical models embodying modern ocean physics were applied, and observational and experimental data bases were exploited. All known physical processes relevant to the dispersal of passive, conservative tracers were discussed, and contact points for inclusion of nonconservative processes (biological and chemical) were identified. Numerical estimates of the amplitude, space, and time scales of dispersion were made for various mechanisms that control the evolution of the dispersal as the material spreads from a bottom point source to small-, meso-, and world-ocean scales. Recommendations for additional work are given. The volume is presented as a handbook of dispersion processes. It is intended to be updated as new results become available

Physics Analyses in the Design of the HFIR Cold Neutron Source

International Nuclear Information System (INIS)

Bucholz, J.A.

1999-01-01

Physics analyses have been performed to characterize the performance of the cold neutron source to be installed in the High Flux Isotope Reactor at the Oak Ridge National Laboratory in the near future. This paper provides a description of the physics models developed, and the resulting analyses that have been performed to support the design of the cold source. These analyses have provided important parametric performance information, such as cold neutron brightness down the beam tube and the various component heat loads, that have been used to develop the reference cold source concept

Electron cyclotron resonance plasmas and electron cyclotron resonance ion sources: Physics and technology (invited)

International Nuclear Information System (INIS)

Girard, A.; Hitz, D.; Melin, G.; Serebrennikov, K.

2004-01-01

Electron cyclotron resonance (ECR) ion sources are scientific instruments particularly useful for physics: they are extensively used in atomic, nuclear, and high energy physics, for the production of multicharged beams. Moreover, these sources are also of fundamental interest for plasma physics, because of the very particular properties of the ECR plasma. This article describes the state of the art on the physics of the ECR plasma related to multiply charged ion sources. In Sec. I, we describe the general aspects of ECR ion sources. Physics related to the electrons is presented in Sec. II: we discuss there the problems of heating and confinement. In Sec. III, the problem of ion production and confinement is presented. A numerical code is presented, and some particular and important effects, specific to ECR ion sources, are shown in Sec. IV. Eventually, in Sec. V, technological aspects of ECR are presented and different types of sources are shown

Collective phenomena in synchrotron radiation sources. Prediction, diagnostics, countermeasures

International Nuclear Information System (INIS)

Khan, S.

2006-01-01

This book helps to dispel the notion that collective phenomena, which have become increasingly important in modern storage rings, are an obscure and inaccessible topic. Despite an emphasis on synchrotron light sources, the basic concepts presented here are valid for other facilities as well. Graduate students, scientists and engineers working in an accelerator environment will find this to be a systematic exposition of the principles behind collective instabilities and lifetime-limiting effects. Experimental methods to identify and characterize collective effects are also surveyed. Among other measures to improve the performance of a projected or existing facility, a detailed account of feedback control of instabilities is given. (orig.)

Physics Mining of Multi-source Data Sets, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — We propose to implement novel physics mining algorithms with analytical capabilities to derive diagnostic and prognostic numerical models from multi-source...

Considering sport participation as a source for physical activity among adolescents.

Science.gov (United States)

Pharr, Jennifer; Lough, Nancy L

2014-07-01

Studies have shown participation in sport is lower among girls than boys, decreases as students matriculate through high school, is lowest among Black and Hispanic girls and has a positive relationship with SES. With sport recognized as a contributor to physical activity and health in adolescents, consideration of diminishing rates of participation appears warranted. The purpose of this study was to identify patterns related to differences in self-reported sport participation between genders, ethnic groups, grades and SES. This study was a cross-sectional, secondary analysis of data collected for a sport interest survey. All students in grades 8-11 attending middle and high schools were provided an opportunity to participate in the survey. Data from 49,832 students were analyzed. Among the participants, Black girls participated more and White girls participated less than expected. Black boys participated more while White and Asian boys participated less than expected. Reported sport participation was high compared with national data when analyzed by gender and ethnic group. Sport participation was higher in low SES schools compared with high SES schools. The importance of sport as a source of physical activity in underserved groups is significant.

Non-physical momentum sources in slab geometry gyrokinetics

International Nuclear Information System (INIS)

Parra, Felix I; Catto, Peter J

2010-01-01

We investigate momentum transport in the Hamiltonian electrostatic gyrokinetic formulation of Dubin et al (1983 Phys. Fluids 26 3524). We prove that the long wavelength electric field obtained from the gyrokinetic quasineutrality introduces a non-physical momentum source in the low flow ordering.

76 FR 23609 - New Proposed Collection; Comment Request; Biospecimen and Physical Measures Formative Research...

Science.gov (United States)

2011-04-27

...; Comment Request; Biospecimen and Physical Measures Formative Research Methodology Studies for the National... Research Methodology Studies for the National Children's Study (NCS) Type of Information Collection Request... clearance to conduct formative research featuring biospecimen and physical measurement collections. The NCS...

Global dust sources detection using MODIS Deep Blue Collection 6 aerosol products

Science.gov (United States)

Pérez García-Pando, C.; Ginoux, P. A.

2015-12-01

Our understanding of the global dust cycle is limited by a dearth of information about dust sources, especially small-scale features which could account for a large fraction of global emissions. Remote sensing sensors are the most useful tool to locate dust sources. These sensors include microwaves, visible channels, and lidar. On the global scale, major dust source regions have been identified using polar orbiting satellite instruments. The MODIS Deep Blue algorithm has been particularly useful to detect small-scale sources such as floodplains, alluvial fans, rivers, and wadis , as well as to identify anthropogenic sources from agriculture. The recent release of Collection 6 MODIS aerosol products allows to extend dust source detection to the entire land surfaces, which is quite useful to identify mid to high latitude dust sources and detect not only dust from agriculture but fugitive dust from transport and industrial activities. This presentation will overview the advantages and drawbacks of using MODIS Deep Blue for dust detection, compare to other instruments (polar orbiting and geostationary). The results of Collection 6 with a new dust screening will be compared against AERONET. Applications to long range transport of anthropogenic dust will be presented.

Reactor physics experiments in PURNIMA sub critical facility coupled with 14 MeV neutron source

International Nuclear Information System (INIS)

Kumar, Rajeev; Degweker, S.B.; Patel, Tarun; Bishnoi, Saroj; Adhikari, P.S.

2011-01-01

Accelerator Driven Sub-critical Systems (ADSS) are attracting increasing worldwide attention due to their superior safety characteristics and their potential for burning actinide and fission product waste and energy production. A number of countries around the world have drawn up roadmaps/programs for development of ADSS. Indian interest in ADSS has an additional dimension, which is related to the planned utilization of our large thorium reserves for future nuclear energy generation. A programme for development of ADSS is taken up at the Bhabha Atomic Research Centre (BARC) in India. This includes R and D activities for high current proton accelerator development, target development and Reactor Physics studies. As part of the ADSS Reactor Physics research programme, a sub-critical facility is coming up in BARC which will be coupled with an existing D-D/D-T neutron generator. Two types of cores are planned. In one of these, the sub-critical reactor assembly consists of natural uranium moderated by high density polyethylene (HDP) and reflected by BeO. The other consists of natural uranium moderated by light water. The maximum neutron yield of the neutron source with tritium target is around 10 10 neutron per sec. Various reactor physics experiments like measurement of the source strength, neutron flux distribution, buckling estimation and sub-critical source multiplication are planned. Apart from this, measurement of the total fission power and neutron spectrum will also be carried out. Mainly activation detectors will be used in all in-core neutron flux measurement. Measurement of the degree of sub-criticality by various deterministic and noise methods is planned. Helium detectors with advanced data acquisition card will be used for the neutron noise experiments. Noise characteristics of ADSS are expected to be different from that of traditional reactors due to the non-Poisson statistical features of the source. A new theory incorporating these features has been

Atomic physics at high brilliance synchrotron sources: Proceedings

International Nuclear Information System (INIS)

Berry, G.; Cowan, P.; Gemmell, D.

1994-08-01

This report contains papers on the following topics: present status of SPring-8 and the atomic physics undulator beamline; recent photoabsorption measurements in the rare gases and alkalis in the 3 to 15 keV proton energy region; atomic and molecular physics at LURE; experiments on atoms, ions and small molecules using the new generation of synchrotron radiation sources; soft x-ray fluorescence spectroscopy using tunable synchrotron radiation; soft x-ray fluorescence spectroscopy excited by synchrotron radiation: Inelastic and resonant scattering near threshold; outer-shell photoionization of ions; overview of the APS BESSRC beamline development; the advanced light source: Research opportunities in atomic and molecular physics; Photoionization of the Ba + ion by 4d shell excitation; decay dynamics of inner-shell excited atoms and molecules; absorption of atomic Ca, Cr, Mn and Cu; High-resolution photoelectron studies of resonant molecular photoionization; radiative and radiationless resonant raman scattering by synchrotron radiation; auger spectrometry of atoms and molecules; some thoughts of future experiments with the new generation of storage rings; Electron spectroscopy studies of argon K-shell excitation and vacancy cascades; ionization of atoms by high energy photons; ion coincidence spectroscopy on rare gas atoms and small molecules after photoexcitation at energies of several keV; an EBIS for use with synchrotron radiation photoionization of multiply charged ions and PHOBIS; gamma-2e coincidence measurements the wave of the future in inner-shell electron spectroscopy; recoil momentum spectroscopy in ion-atom and photon-atom collisions; a study of compton ionization of helium; future perspectives of photoionization studies at high photon energies; and status report on the advanced photon source. These papers have been cataloged separately elsewhere

A Framework for the Systematic Collection of Open Source Intelligence

Energy Technology Data Exchange (ETDEWEB)

Pouchard, Line Catherine [ORNL; Trien, Joseph P [ORNL; Dobson, Jonathan D [ORNL

2009-01-01

Following legislative directions, the Intelligence Community has been mandated to make greater use of Open Source Intelligence (OSINT). Efforts are underway to increase the use of OSINT but there are many obstacles. One of these obstacles is the lack of tools helping to manage the volume of available data and ascertain its credibility. We propose a unique system for selecting, collecting and storing Open Source data from the Web and the Open Source Center. Some data management tasks are automated, document source is retained, and metadata containing geographical coordinates are added to the documents. Analysts are thus empowered to search, view, store, and analyze Web data within a single tool. We present ORCAT I and ORCAT II, two implementations of the system.

Sources Of Incidental Events In Collective Water Supply System

Directory of Open Access Journals (Sweden)

Szpak Dawid

2015-11-01

Full Text Available The publication presents the main types of incidental events in collective water supply system. The special attention was addressed to the incidental events associated with a decrease in water quality, posing a threat to the health and life of inhabitants. The security method against incidental contamination in the water source was described.

Project-based physics labs using low-cost open-source hardware

Science.gov (United States)

Bouquet, F.; Bobroff, J.; Fuchs-Gallezot, M.; Maurines, L.

2017-03-01

We describe a project-based physics lab, which we proposed to third-year university students. These labs are based on new open-source low-cost equipment (Arduino microcontrollers and compatible sensors). Students are given complete autonomy: they develop their own experimental setup and study the physics topic of their choice. The goal of these projects is to let students to discover the reality of experimental physics. Technical specifications of the acquisition material and case studies are presented for practical implementation in other universities.

A MEDL Collection Showcase: A Collection of Hands-on Physical Analog Models and Demonstrations From the Department of Geosciences MEDL at Virginia Tech

Science.gov (United States)

Glesener, G. B.

2017-12-01

The Geosciences Modeling and Educational Demonstrations Laboratory (MEDL) will present a suite of hands-on physical analog models from our curriculum materials collection used to teach about a wide range of geoscience processes. Many of the models will be equipped with Vernier data collection sensors, which visitors will be encouraged to explore on-site. Our goal is to spark interest and discussion around the affordances of these kinds of curriculum materials. Important topics to discuss will include: (1) How can having a collection of hands-on physical analog models be used to effectively produce successful broader impacts activities for research proposals? (2) What kinds of learning outcomes have instructors observed when teaching about temporally and spatially challenging concepts using physical analog models? (3) What does it take for an institution to develop their own MEDL collection? and (4) How can we develop a community of individuals who provide on-the-ground support for instructors who use physical analog models in their classroom.

Inadequacies of Physical Examination as a Cause of Medical Errors and Adverse Events: A Collection of Vignettes.

Science.gov (United States)

Verghese, Abraham; Charlton, Blake; Kassirer, Jerome P; Ramsey, Meghan; Ioannidis, John P A

2015-12-01

Oversights in the physical examination are a type of medical error not easily studied by chart review. They may be a major contributor to missed or delayed diagnosis, unnecessary exposure to contrast and radiation, incorrect treatment, and other adverse consequences. Our purpose was to collect vignettes of physical examination oversights and to capture the diversity of their characteristics and consequences. A cross-sectional study using an 11-question qualitative survey for physicians was distributed electronically, with data collected from February to June of 2011. The participants were all physicians responding to e-mail or social media invitations to complete the survey. There were no limitations on geography, specialty, or practice setting. Of the 208 reported vignettes that met inclusion criteria, the oversight was caused by a failure to perform the physical examination in 63%; 14% reported that the correct physical examination sign was elicited but misinterpreted, whereas 11% reported that the relevant sign was missed or not sought. Consequence of the physical examination inadequacy included missed or delayed diagnosis in 76% of cases, incorrect diagnosis in 27%, unnecessary treatment in 18%, no or delayed treatment in 42%, unnecessary diagnostic cost in 25%, unnecessary exposure to radiation or contrast in 17%, and complications caused by treatments in 4%. The mode of the number of physicians missing the finding was 2, but many oversights were missed by many physicians. Most oversights took up to 5 days to identify, but 66 took longer. Special attention and skill in examining the skin and its appendages, as well as the abdomen, groin, and genitourinary area could reduce the reported oversights by half. Physical examination inadequacies are a preventable source of medical error, and adverse events are caused mostly by failure to perform the relevant examination. Copyright © 2015 Elsevier Inc. All rights reserved.

Strength and sources of self-efficacy beliefs by physical education student teachers

Directory of Open Access Journals (Sweden)

Roberto Tadeu Iaochite

2014-06-01

Full Text Available In the teaching domain, self-efficacy (SE is related to teachers' judgment about their own ability to achieve learning outcomes and student engagement. SE is formed by four sources of information: mastery experiences, vicarious experiences, social persuasion, and psychophysiological states. We measured and analyzed SE and its sources for teaching physical education. Student teachers (n = 114 from three universities responded to two Likert scales - Physical Education Teacher Self-Efficacy Scale and Teacher Self-Efficacy Scale Sources - and a social demographic questionnaire. SE for teaching was classified as moderate, and vicarious experiences and social persuasion were the main sources of information. Results were discussed for future researches related to teaching practices in undergraduate programs as well as in-service teacher training.

Multi-Source Cooperative Data Collection with a Mobile Sink for the Wireless Sensor Network.

Science.gov (United States)

Han, Changcai; Yang, Jinsheng

2017-10-30

The multi-source cooperation integrating distributed low-density parity-check codes is investigated to jointly collect data from multiple sensor nodes to the mobile sink in the wireless sensor network. The one-round and two-round cooperative data collection schemes are proposed according to the moving trajectories of the sink node. Specifically, two sparse cooperation models are firstly formed based on geographical locations of sensor source nodes, the impairment of inter-node wireless channels and moving trajectories of the mobile sink. Then, distributed low-density parity-check codes are devised to match the directed graphs and cooperation matrices related with the cooperation models. In the proposed schemes, each source node has quite low complexity attributed to the sparse cooperation and the distributed processing. Simulation results reveal that the proposed cooperative data collection schemes obtain significant bit error rate performance and the two-round cooperation exhibits better performance compared with the one-round scheme. The performance can be further improved when more source nodes participate in the sparse cooperation. For the two-round data collection schemes, the performance is evaluated for the wireless sensor networks with different moving trajectories and the variant data sizes.

76 FR 38191 - New Proposed Collection; Comment Request; Biospecimen and Physical Measures Formative Research...

Science.gov (United States)

2011-06-29

...; Comment Request; Biospecimen and Physical Measures Formative Research Methodology Studies for the National... comment. Proposed Collection: Title: Biospecimen and Physical Measures Formative Research Methodology... Development* to conduct a national longitudinal study of environmental influences (including physical...

Ebooks without Vendors: Using Open Source Software to Create and Share Meaningful Ebook Collections

Directory of Open Access Journals (Sweden)

Matt Weaver

2014-07-01

Full Text Available The Community Cookbook project began with wondering how to take local cookbooks in the library’s collection and create a recipe database. The final website is both a recipe website and collection of ebook versions of local cookbooks. This article will discuss the use of open source software at every stage in the project, which proves that an open source publishing model is possible for any library.

Observational constraints on the physical nature of submillimetre source multiplicity: chance projections are common

Science.gov (United States)

Hayward, Christopher C.; Chapman, Scott C.; Steidel, Charles C.; Golob, Anneya; Casey, Caitlin M.; Smith, Daniel J. B.; Zitrin, Adi; Blain, Andrew W.; Bremer, Malcolm N.; Chen, Chian-Chou; Coppin, Kristen E. K.; Farrah, Duncan; Ibar, Eduardo; Michałowski, Michał J.; Sawicki, Marcin; Scott, Douglas; van der Werf, Paul; Fazio, Giovanni G.; Geach, James E.; Gurwell, Mark; Petitpas, Glen; Wilner, David J.

2018-05-01

Interferometric observations have demonstrated that a significant fraction of single-dish submillimetre (submm) sources are blends of multiple submm galaxies (SMGs), but the nature of this multiplicity, i.e. whether the galaxies are physically associated or chance projections, has not been determined. We performed spectroscopy of 11 SMGs in six multicomponent submm sources, obtaining spectroscopic redshifts for nine of them. For an additional two component SMGs, we detected continuum emission but no obvious features. We supplement our observed sources with four single-dish submm sources from the literature. This sample allows us to statistically constrain the physical nature of single-dish submm source multiplicity for the first time. In three (3/7, { or} 43^{+39 }_{ -33} {per cent at 95 {per cent} confidence}) of the single-dish sources for which the nature of the blending is unambiguous, the components for which spectroscopic redshifts are available are physically associated, whereas 4/7 (57^{+33 }_{ -39} per cent) have at least one unassociated component. When components whose spectra exhibit continuum but no features and for which the photometric redshift is significantly different from the spectroscopic redshift of the other component are also considered, 6/9 (67^{+26 }_{ -37} per cent) of the single-dish sources are comprised of at least one unassociated component SMG. The nature of the multiplicity of one single-dish source is ambiguous. We conclude that physically associated systems and chance projections both contribute to the multicomponent single-dish submm source population. This result contradicts the conventional wisdom that bright submm sources are solely a result of merger-induced starbursts, as blending of unassociated galaxies is also important.

Opportunities for Neutrino Physics at the Spallation Neutron Source: A White Paper

Energy Technology Data Exchange (ETDEWEB)

Bolozdynya, A. [Moscow Phys. Eng. Inst.; Cavanna, F. [INFN, Aquila; Efremenko, Y. [Tennessee U.; Garvey, G. T. [Los Alamos; Gudkov, V. [South Carolina U.; Hatzikoutelis, A. [Tennessee U.; Hix, W. R. [Oak Ridge; Louis, W. C. [Los Alamos; Link, J. M. [Virginia Tech.; Markoff, D. M. [North Carolina Central U.; Mills, G. B. [Los Alamos; Patton, K. [North Carolina State U.; Ray, H. [Florida U.; Scholberg, K. [Duke U.; Van de Water, R. G. [Los Alamos; Virtue, C. [Laurentian U.; White, D. H. [Los Alamos; Yen, S. [TRIUMF; Yoo, J. [Fermilab

2012-11-01

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory, Tennessee, provides an intense flux of neutrinos in the few tens-of-MeV range, with a sharply-pulsed timing structure that is beneficial for background rejection. In this document, the product of a workshop at the SNS in May 2012, we describe this free, high-quality stopped-pion neutrino source and outline various physics that could be done using it. We describe without prioritization some specific experimental configurations that could address these physics topics.

Atomic physics with high-brightness synchrotron x-ray sources

International Nuclear Information System (INIS)

Jones, K.W.; Johnson, B.M.; Meron, M.

1985-11-01

A description of atomic physics experiments that we intend to carry out at the National Synchrotron Light Source is given. Emphasis is given to work that investigates the properties of multiply charged ions. The use of a synchrotron storage ring for highly charged heavy ions is proposed as a way to produce high current beams which will make possible experiments to study the photoexcitation and ionization of multiply charged ions for the first time. Experiments along the same lines which are feasible at the proposed Advanced Light Source are considered briefly. 7 refs., 2 figs

Plasma physics

CERN Document Server

Drummond, James E

1961-01-01

A historic snapshot of the field of plasma physics, this fifty-year-old volume offers an edited collection of papers by pioneering experts in the field. In addition to assisting students in their understanding of the foundations of classical plasma physics, it provides a source of historic context for modern physicists. Highly successful upon its initial publication, this book was the standard text on plasma physics throughout the 1960s and 70s.Hailed by Science magazine as a ""well executed venture,"" the three-part treatment ranges from basic plasma theory to magnetohydrodynamics and microwa

Laser physics

CERN Document Server

Milonni, Peter W

2010-01-01

Create physically realistic 3D Graphics environments with this introduction to the ideas and techniques behind the process. Author David H. Eberly includes simulations to introduce the key problems involved and then gradually reveals the mathematical and physical concepts needed to solve them. He then describes all the algorithmic foundations and uses code examples and working source code to show how they are implemented, culminating in a large collection of physical simulations. The book tackles the complex, challenging issues that other books avoid, including Lagrangian dynamics, rigid body

Electronic collection of solved physics problems to encourage students’ active approach (not only to self study)

Science.gov (United States)

Koupilová, Zdeňka; Mandíková, Dana; Snětinová, Marie

2017-09-01

Ten years ago we started to develop a Collection of Fully Solved Problems aimed at introductory undergraduate and high school level students. The collection is specially designed to encourage students in an active approach to problem solving, e.g. to solve at least some parts of a problem on their own. Nowadays the Collection contains about 800 fully solved problems in physics in Czech and nearly 180 problems in English. It has several hundreds of unique visitors per school day. Based on user feedback, the collection is used by students mainly for their home study and by teachers as a supplementary material. The creation of the structured solution of the physics problems has proved to be a beneficial activity for prospective physics teachers (students of our department).

Studies of electron cyclotron resonance ion source plasma physics

International Nuclear Information System (INIS)

Tarvainen, O.

2005-01-01

This thesis consists of an introduction to the plasma physics of electron cyclotron resonance ion sources (ECRIS) and a review of the results obtained by the author and co-workers including discussion of related work by others. The thesis begins with a theoretical discussion dealing with plasma physics relevant for the production of highly charged ions in ECR ion source plasmas. This is followed by an overview of different techniques, such as gas mixing and double frequency heating, that can be used to improve the performance of this type of ion source. The experimental part of the work consists of studies related to ECRIS plasma physics. The effect of the gas mixing technique on the production efficiency of different ion beams was studied with both gaseous and solid materials. It was observed that gas mixing improves the confinement of the heavier element while the confinement of the lighter element is reduced. When the effect of gas mixing on MIVOC-plasmas was studied with several mixing gases it was observed that applying this technique can reduce the inevitable carbon contamination by a significant factor. In order to understand the different plasma processes taking place in ECRIS plasmas, a series of plasma potential and emittance measurements was carried out. An instrument, which can be used to measure the plasma potential in a single measurement without disturbing the plasma, was developed for this work. Studying the plasma potential of ECR ion sources is important not only because it helps to understand different plasma processes, but also because the information can be used as an input parameter for beam transport simulations and ion source extraction design. The experiments performed have revealed clear dependencies of the plasma potential on certain source parameters such as the amount of carbon contamination accumulated on the walls of the plasma chamber during a MIVOC-run. It was also observed that gas mixing affects not only the production efficiency

Towards fusion energy as a sustainable energy source: Activities at DTU Physics

DEFF Research Database (Denmark)

Rasmussen, Jesper; Christensen, Alexander Simon; Dam, Magnus

2014-01-01

a fusion plasma) and to confine it within magnetic fields. Learning how such plasmas behave and can be controlled is a crucial step towards realizing fusion as a sustainable energy source.At the Plasma Physics and Fusion Energy (PPFE) section at DTU Physics, we are exploring these issues,focusing on areas...

Electronic collection of solved physics problems to encourage students’ active approach (not only to self study)

International Nuclear Information System (INIS)

Koupilová, Zdeňka; Mandíková, Dana; Snětinová, Marie

2017-01-01

Ten years ago we started to develop a Collection of Fully Solved Problems aimed at introductory undergraduate and high school level students. The collection is specially designed to encourage students in an active approach to problem solving, e.g. to solve at least some parts of a problem on their own. Nowadays the Collection contains about 800 fully solved problems in physics in Czech and nearly 180 problems in English. It has several hundreds of unique visitors per school day. Based on user feedback, the collection is used by students mainly for their home study and by teachers as a supplementary material. The creation of the structured solution of the physics problems has proved to be a beneficial activity for prospective physics teachers (students of our department). (paper)

Basic physics program for a low energy antiproton source in North America

International Nuclear Information System (INIS)

Bonner, B.E.; Nieto, M.M.

1987-01-01

We summarize much of the important science that could be learned at a North American low energy antiproton source. It is striking that there is such a diverse and multidisciplinary program that would be amenable to exploration. Spanning the range from high energy particle physics to nuclear physics, atomic physics, and condensed matter physics, the program promises to offer many new insights into these disparate branches of science. It is abundantly clear that the scientific case for rapidly proceeding towards such a capability in North America is both alluring and strong. 38 refs., 2 tabs

[Data sources, the data used, and the modality for collection].

Science.gov (United States)

Mercier, G; Costa, N; Dutot, C; Riche, V-P

2018-03-01

The hospital costing process implies access to various sources of data. Whether a micro-costing or a gross-costing approach is used, the choice of the methodology is based on a compromise between the cost of data collection, data accuracy, and data transferability. This work describes the data sources available in France and the access modalities that are used, as well as the main advantages and shortcomings of: (1) the local unit costs, (2) the hospital analytical accounting, (3) the Angers database, (4) the National Health Cost Studies, (5) the INTER CHR/U databases, (6) the Program for Medicalizing Information Systems, and (7) the public health insurance databases. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Heavy physical work under time pressure: the garbage collection service--a case study.

Science.gov (United States)

Camada, Ilza Mitsuko de Oliveira; Pataro, Silvana Maria Santos; Fernandes, Rita de Cássia Pereira

2012-01-01

The increased generation of garbage has become a problem in large cities, with greater demand for collection services. The collector is subjected to high workload. This study describes the work in garbage collection service, highlighting the requirements of time, resulting in physical and psychosocial demands to collectors. Ergonomic Work Analysis (EWA) - a method focused on the study of work in real situations was used. Initially, technical visits, global observations and unstructured interviews with different subjects of a garbage collection company were conducted. The following step of the systematic observations was accompanied by interviews conducted during the execution of tasks, inquiring about the actions taken, and also interviews about the actions, but conducted after the development of the tasks, photographic records and audiovisual recordings, of workers from two garbage collection teams. Contradictions between the prescribed work and activities (actual work) were identified, as well as the variability present in this process, and strategies adopted by these workers to regulate the workload. It was concluded that the insufficiency of means and the organizational structure of management ensue a situation where the collection process is maintained at the expense of hyper-requesting these workers, both physically and psychosocially.

Atomic physics at the Advanced Photon Source: Workshop report

International Nuclear Information System (INIS)

1990-10-01

The first Workshop on Atomic Physics at the Advanced Photon Source was held at Argonne National Laboratory on March 29--30, 1990. The unprecedented brightness of the Advanced Photon Source (APS) in the hard X-ray region is expected to make possible a vast array of new research opportunities for the atomic-physics community. Starting with discussions of the history and current status of the field, presentations were made on various future directions for research with hard X-rays interacting with atoms, ions, clusters, and solids. Also important were the discussions on the design and status of the four next-generation rings coming on line during the 1990's: the ALS 1.6 GeV ring at Berkeley; the ESRF 6.0-GeV ring at Grenoble (1993); the APS 7.0-GeV ring at Argonne (1995); and the SPring-8 8.0-GeV ring in Japan (1998). The participation of more than one hundred scientists from domestic as well as foreign institutions demonstrated a strong interest in this field. We plan to organize follow-up workshops in the future emphasizing specific research topics

Physical activity and social support in adolescents: analysis of different types and sources of social support.

Science.gov (United States)

Mendonça, Gerfeson; Júnior, José Cazuza de Farias

2015-01-01

Little is known about the influence of different types and sources of social support on physical activity in adolescents. The aim of this study was to analyse the association between physical activity and different types and sources of social support in adolescents. The sample consisted of 2,859 adolescents between 14-19 years of age in the city of João Pessoa, in Northeastern Brazil. Physical activity was measured with a questionnaire and social support from parents and friends using a 10-item scale five for each group (type of support: encouragement, joint participation, watching, inviting, positive comments and transportation). Multivariable analysis showed that the types of support provided by parents associated with physical activity in adolescents were encouragement for females (P genders (males: P = 0.009; females: P physical activity varies according to its source, as well as the gender and age of the adolescents.

Sources of variability in collection and preparation of paint and lead-coating samples.

Science.gov (United States)

Harper, S L; Gutknecht, W F

2001-06-01

Chronic exposure of children to lead (Pb) can result in permanent physiological impairment. Since surfaces coated with lead-containing paints and varnishes are potential sources of exposure, it is extremely important that reliable methods for sampling and analysis be available. The sources of variability in the collection and preparation of samples were investigated to improve the performance and comparability of methods and to ensure that data generated will be adequate for its intended use. Paint samples of varying sizes (areas and masses) were collected at different locations across a variety of surfaces including metal, plaster, concrete, and wood. A variety of grinding techniques were compared. Manual mortar and pestle grinding for at least 1.5 min and mechanized grinding techniques were found to generate similar homogenous particle size distributions required for aliquots as small as 0.10 g. When 342 samples were evaluated for sample weight loss during mortar and pestle grinding, 4% had 20% or greater loss with a high of 41%. Homogenization and sub-sampling steps were found to be the principal sources of variability related to the size of the sample collected. Analysis of samples from different locations on apparently identical surfaces were found to vary by more than a factor of two both in Pb concentration (mg cm-2 or %) and areal coating density (g cm-2). Analyses of substrates were performed to determine the Pb remaining after coating removal. Levels as high as 1% Pb were found in some substrate samples, corresponding to more than 35 mg cm-2 Pb. In conclusion, these sources of variability must be considered in development and/or application of any sampling and analysis methodologies.

DADOS-Prospective: an open source application for Web-based prospective data collection

Directory of Open Access Journals (Sweden)

Nguyen Lam

2006-11-01

Full Text Available Abstract Background Randomized, prospective trials involving multi-institutional collaboration have become a central part of clinical and translational research. However, data management and coordination of multi-center studies is a complex process that involves developing systems for data collection and quality control, tracking data queries and resolutions, as well as developing communication procedures. We describe DADOS-Prospective, an open-source Web-based application for collecting and managing prospective data on human subjects for clinical and translational trials. DADOS-Prospective not only permits users to create new clinical research forms (CRF and supports electronic signatures, but also offers the advantage of containing, in a single environment, raw research data in downloadable spreadsheet format, source documentation and regulatory files stored in PDF format, and audit trails. Results Feedback from formal and field usability tests was used to guide the design and development of DADOS-Prospective. To date, DADOS-Prospective has been implemented in five prospective clinical studies at our institution. Four of these studies are still in the CRF creation phase and one study has been entirely launched. Conclusion DADOS-Prospective has significant advantages over existing Web-based data collecting programs. At our institution, it has been demonstrated to be an efficient tool for prospective clinical studies.

Smartphone applications as a source of motivation for engaging in physical activity

Science.gov (United States)

Kuska, Michalina; Żukowska, Hanna

2017-11-01

The aim of this article was to examine whether smartphone applications provide a source of motivation for engaging in physical activity by adult Poles. The study was conducted at the turn of January and February 2017 and included 500 people. The diagnostic survey was used as a research method and questionnaire as a research instrument. For the purpose of the study, only the correctly filled out forms, that is 420, were selected from 500 completed surveys. The study revealed a positive impact of modern technologies on physical activity of respondents. Ensuring greater access to modern technologies and creating application possibilities related to physical activity could contribute to increased interest in and greater motivation for undertaking physical activity.

76 FR 54474 - Submission for OMB Review; Comment Request New proposed collection, Biospecimen and Physical...

Science.gov (United States)

2011-09-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Submission for OMB Review; Comment Request New proposed collection, Biospecimen and Physical Measures Formative Research Methodology... and Budget (OMB) a request to review and approve the information collection listed below. This...

Mobile sources of polycyclic aromatic hydrocarbons (PAH) and nitro-PAH: Results of samples collected in a roadway tunnel

International Nuclear Information System (INIS)

Benner, B.A. Jr.; Gordon, G.E.; Wise, S.A.

1987-01-01

A recent review article emphasized the need for further characterizations of the carbonaceous fraction of mobile source emissions, particularly with the impending removal of lead alkyl octane boosters and bromine-containing lead scavengers from regular leaded gasolines. The lead and bromine emitted from the combustion of these fuels have been used as tracers of mobile source emissions for a number of years. Single vehicle emission studies have shed light on the relationship between engine operating parameters and the chemical characteristics of the emissions but they are not suitable for use in source apportionment studies which require emission data from a large number of different vehicles. Air particulate samples collected near a busy highway or in a roadway tunnel would be more appropriate for use in estimating the mobile source contribution of organic compounds to a region. Suspended particle samples collected in a heavily-travelled roadway tunnel (Baltimore Harbor Tunnel, Baltimore, Maryland) were characterized for polycyclic aromatic hydrocarbons (PAH) and some nitro-PAH by gas and liquid chromatographic techniques. These samples included those collected on Teflon filters and on glass fiber filters for investigating any differences in samples collected on an inert (Teflon) and more reactive (glass-fiber) medium. All samples collected on Teflon were backed-up with polyurethane foam plugs (PUF) which trapped any inherent vapor-phase PAH as well as any compounds ''blown-off'' the particles during collection

Collective Dynamics in Physical and Social Networks

Science.gov (United States)

Isakov, Alexander

We study four systems where individual units come together to display a range of collective behavior. First, we consider a physical system of phase oscillators on a network that expands the Kuramoto model to include oscillator-network interactions and the presence of noise: using a Hebbian-like learning rule, oscillators that synchronize in turn strengthen their connections to each other. We find that the average degree of connectivity strongly affects rates of flipping between aligned and anti-aligned states, and that this result persists to the case of complex networks. Turning to a fully multi-player, multi-strategy evolutionary dynamics model of cooperating bacteria that change who they give resources to and take resources from, we find several regimes that give rise to high levels of collective structure in the resulting networks. In this setting, we also explore the conditions in which an intervention that affects cooperation itself (e.g. "seeding the network with defectors") can lead to wiping out an infection. We find a non-monotonic connection between the percent of disabled cooperation and cure rate, suggesting that in some regimes a limited perturbation can lead to total population collapse. At a larger scale, we study how the locomotor system recovers after amputation in fruit flies. Through experiment and a theoretical model of multi-legged motion controlled by neural oscillators, we find that proprioception plays a role in the ability of flies to control leg forces appropriately to recover from a large initial turning bias induced by the injury. Finally, at the human scale, we consider a social network in a traditional society in Africa to understand how social ties lead to group formation for collective action (stealth raids). We identify critical and distinct roles for both leadership (important for catalyzing a group) and friendship (important for final composition). We conclude with prospects for future work.

Initial growth of physic nut as a function of sources and doses of organic fertilizers

OpenAIRE

Schulz,Deisinara Giane; Fey,Rubens; Ruppenthal,Viviane; Malavasi,Marlene de Matos; Malavasi,Ubirajara Contro

2012-01-01

Organic fertilization provides low cost, supplemental nutrition for plant production. This study aimed to determine the best source and dose of organic fertilizer on the growth of physic nut (Jatropha curcas L.), a potential biodiesel producer. Physic nut seedlings were transplanted to 18 dm³ black plastic pots filled with soil mixed with four sources of organic fertilizer (chicken, fish, cattle manure or urban waste compost) at four dose levels (50, 100, 200 or 400 L m-3). Fertilized and con...

The Physical Basis of Lg Generation by Explosion Sources

Energy Technology Data Exchange (ETDEWEB)

J. L. Stevens; G. E. Baker; H. Xu; T. J. Bennett; N. Rimer; S. D. Day

2004-12-20

The goal of this project has been to develop a quantitative predictive capability for explosion-generated Lg phases with a sound and unambiguous physical basis. The research program consisted of a theoretical investigation of explosion-generated Lg combined with an observational study. The specific question addressed by this research program is how the Lg phase is generated by underground nuclear explosions. This question is fundamental to how Lg phases are interpreted for use in explosion yield estimation and earthquake/explosion discrimination. To constrain modeling, we have extensively reviewed the existing literature and complemented that work with an examination of several explosion data sets, most notably: (1) Degelen Mountain explosions recorded between 7 and 57 km, with corresponding recordings at Borovoye, at approximately 650 km; (2) recordings from Russian deep seismic sounding experiments; (3) NTS explosion sources including the NPE and nuclear tests covering a range of source depths and media properties. A simple point explosion in an infinite medium generates no shear waves, so the Lg phase is generated entirely by non-spherical components of the source and conversions through reflections and scattering. We find that the most important contributors to the Lg phase are: (1) P to S conversion at the free surface and other near source interfaces, (2) S waves generated directly by a realistically distributed explosion source including nonlinear effects due to the free surface and gravity, and (3) Rg scattering to Lg. Additional effects that contribute significantly to Lg are scattering of converted S phases that traps more of the converted P-to-S in the crust, and randomization of the components of Lg. The pS phase from a spherically symmetric explosion source in media with P-wave velocity less than upper mantle S-wave velocity is trapped in the crust and can explain the observed radial and vertical Lg. The free surface pS converted phase from the same

Quantum theory of collective phenomena

CERN Document Server

Sewell, G L

2014-01-01

""An excellent and competent introduction to the field … [and] … a source of information for the expert."" - Physics Today""This a book of major importance…. I trust that this book will be used as a basis for the teaching of a balanced, modern and rigorous course on statistical mechanics in all universities."" - Bulletin of the London Mathematical Society""This is one of the best introductions to the subject, and it is strongly recommended to anyone interested in collective phenomena."" - Physics Bulletin ""The book may be recommended for students as a well-balanced introduction to this rich s

75 FR 15610 - Employment Taxes and Collection of Income Tax at Source

Science.gov (United States)

2010-03-30

... DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Part 31 Employment Taxes and Collection of Income Tax at Source CFR Correction In Title 26 of the Code of Federal Regulations, Parts 30 to 39, revised as of April 1, 2010, on page 262, in Sec. 31.3402(o)-3, replace the fifth sentence in paragraph (c...

78 FR 19100 - Employment Taxes and Collection of Income Tax at Source

Science.gov (United States)

2013-03-29

... DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Part 31 Employment Taxes and Collection of Income Tax at Source CFR Correction In Title 26 of the Code of Federal Regulations, Parts 30 to 39, revised as of April 1, 2012, on page 301, in Sec. 31.3406(b)(3)-2, in paragraph (b)(5), the language ``Sec...

A statistical–mechanical view on source coding: physical compression and data compression

International Nuclear Information System (INIS)

Merhav, Neri

2011-01-01

We draw a certain analogy between the classical information-theoretic problem of lossy data compression (source coding) of memoryless information sources and the statistical–mechanical behavior of a certain model of a chain of connected particles (e.g. a polymer) that is subjected to a contracting force. The free energy difference pertaining to such a contraction turns out to be proportional to the rate-distortion function in the analogous data compression model, and the contracting force is proportional to the derivative of this function. Beyond the fact that this analogy may be interesting in its own right, it may provide a physical perspective on the behavior of optimum schemes for lossy data compression (and perhaps also an information-theoretic perspective on certain physical system models). Moreover, it triggers the derivation of lossy compression performance for systems with memory, using analysis tools and insights from statistical mechanics

Observations of collective effects at the Advanced Light Source

International Nuclear Information System (INIS)

Byrd, J.M.; Barry, W.; Corlett, J.N.; Fox, J.; Teytelman, D.

1995-10-01

We present a summary of measurements of single beam collective effects in the Advanced Light Source (ALS). We describe measurements of coupled-bunch instabilities, including some recent results using the newly commissioned feedback systems and the results of an initial search for the fast ion instability. Single bunch effects include bunch lengthening, energy spread increase, HOM loss measurements, head-tail damping rates, current dependent tune shifts, and transverse mode coupling instability threshold. The longitudinal measurements are consistent with a broadband impedance |Ζ parallel /η| eff = 0.22±0.07 Ω and transverse measurements indicate broadband impedances of Ζ y,eff = 155 kΩ/m and Z x,eff = 58 kΩ/m

Sources of student engagement in Introductory Physics for Life Sciences

Science.gov (United States)

Geller, Benjamin D.; Turpen, Chandra; Crouch, Catherine H.

2018-06-01

We explore the sources of student engagement with curricular content in an Introductory Physics for Life Science (IPLS) course at Swarthmore College. Do IPLS students find some life-science contexts more interesting than others, and, if so, what are the sources of these differences? We draw on three sources of student data to answer this question: (1) quantitative survey data illustrating how interested students were in particular contexts from the curriculum, (2) qualitative survey data in which students describe the source of their interest in these particular contexts, and (3) interview data in which students reflect on the contexts that were and were not of interest to them. We find that examples that make interdisciplinary connections with students' other coursework in biology and chemistry, and examples that make connections to what students perceive to be the "real world," are particularly effective at fostering interest. More generally, students describe being deeply engaged with contexts that foster a sense of coherence or have personal meaning to them. We identify various "engagement pathways" by which different life-science students engage with IPLS content, and suggest that a curriculum needs to be flexible enough to facilitate these different pathways.

Geochemical, Sulfur Isotopic Characteristics and Source Contributions of Size-Aggregated Aerosols Collected in Baring Head, New Zealand.

Science.gov (United States)

Li, J.; Michalski, G. M.; Davy, P.; Harvey, M.; Wilkins, B. P.; Katzman, T. L.

2017-12-01

Sulfate aerosols are critical to the climate, human health, and the hydrological cycle in the atmosphere, yet the sources of sulfate in aerosols are not completely understood. In this work, we evaluated the sources of sulfate in size-aggregated aerosols from the Southern Pacific Ocean and the land of New Zealand using geochemical and isotopic analyses. Aerosols were collected at Baring Head, New Zealand between 6/30/15 to 8/4/16 using two collectors, one only collects Southern Pacific Ocean derived aerosols (open-ocean collector), the other collects aerosols from both the ocean and the land (all-direction collector). Each collector is equipped with two filters to sample size-aggregated aerosols (fine aerosols: NSS-SO42-, 70%), while coarse aerosols are dominated by sea-salt sulfate. However, some NSS-SO42- was also observed in coarse aerosols collected in summer, suggesting the presence of accumulation mode NSS-SO42- aerosols, which is possibly due to high summer biogenic DMS flux. The sources of sulfur in NSS-SO42- could be further determined by their d34S values. DMS emission is likely the sole sulfur source in the open-ocean collector as it shows constant DMS-like d34S signatures (15-18‰) throughout the year. Meanwhile, the d34S of NSS-SO42- in the all-direction collector display a seasonal trend: summer time d34S values are higher and DMS-like (15-18‰), indicating DMS emission is the dominant sulfur source; winter time d34S values are lower ( 6-12‰), therefore the sulfur is likely sourced from both DMS emission and terrestrial S input with low d34S values, such as volcanic activities, fossil fuel and wood burning.

Chemistry and physics of fogwater collection. Final report

Energy Technology Data Exchange (ETDEWEB)

Jaeschke, W.; Enderle, K.H. (eds.)

1988-01-01

Increasing interest in the problems of air pollution and source receptor relationships has led to a significant expansion of knowledge in the field of atmospheric chemistry. In recent years the multiphase atmospheric chemistry was given great scholarly attention, and slogans like acid precipitation, dirty cloud or killer fog indicated these phenomena. The report describes results of collection and chemical analysis of fog water with emphasis or fog microphysics, of the heterogeneous atmospheric chemistry project in the Po-valley, of the development of the Great Dun Fell project, of the mountain cloud chemistry project in eastern U.S., of the design of fog water collectors and of the numerical study of the radiation fog event on October 10/11, 1982 in Albany, N.Y.

Coal combustion by-product quality at two stoker boilers: Coal source vs. fly ash collection system design

Energy Technology Data Exchange (ETDEWEB)

Mardon, Sarah M. [Kentucky Department for Environmental Protection, Division of Water, Frankfort, KY 40601 (United States); Hower, James C. [University of Kentucky Center for Applied Energy Research, 2540 Research Park Drive, Lexington, KY 40511 (United States); O' Keefe, Jennifer M.K. [Morehead State University, Department of Physical Sciences, Morehead, KY 40351 (United States); Marks, Maria N. [Environmental Consulting Services, Lexington, KY 40508 (United States); Hedges, Daniel H. [University of Kentucky, Department of Earth and Environmental Sciences, Lexington, KY 40506 (United States)

2008-09-15

Fly ashes from two stoker boilers burning Pennsylvanian Eastern Kentucky high volatile A bituminous coal blends were examined for their petrology and chemistry. The source coals have similar trace element contents. One of the ash collection systems was retrofitted with a baghouse (fabric filter) system, collecting a finer fly ash at a cooler flue gas temperature than the plant that has not been reconfigured. The baghouse ash has a markedly higher trace element content than the coarser fly ash from the other plant. The enhanced trace element content is most notable in the As concentration, reaching nearly 9000 ppm (ash basis) for one of the collection units. Differences in the ash chemistry are not due to any substantial differences in the coal source, even though the coal sources were from different counties and from different coal beds, but rather to the improved pollution control system in the steam plant with the higher trace element contents. (author)

PIXE Analysis and source identification of airborne particulate matter collected in Downtown Havana City

International Nuclear Information System (INIS)

Perez, G.; Pinnera, I; Ramos, M; Guibert, R; Molina, E.; Martinez, M.; Fernandez, A.; Aldape, F.; Flores, M.

2009-01-01

A set of samples containing airborne particulate matter (in two particle size fraction PM10 and PM2,5) collected during five months from November 2006 to April 2007 in a urban area of Havana City were analyzed by Particle-Induced X-ray Emission (PIXE) technique and the concentrations of 14 elements (S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br and Pb) were determined consistently in both particle size fractions with minimum detection limits in the range of ng/m3. A Gent air sampler was used for the aerosol collection in PM10 and PM2,5 particles simultaneously and the PIXE elemental analysis were performed using a proton beam of 2.5 MeV from the 2 MV Van de Graff Tandetron Accelerator at the ININ PIXE Laboratory in Mexico. The analytical database provided by PIXE was statistically analyzed in order to determine the promising local pollution sources. The statistical techniques of Multivariate Factor Analysis in combination with the Principal Component Analysis methods were applied to this data and allowed identifying five main pollution sources of airborne particulate matter (PM10 and PM2,5) collected in this area. The main (local) identified sources were: soil dust, sea spray, industry, fossil fuel combustion from motor vehicles and burnings or incinerations of diverse materials. A general discussion about these results is presented in this work. (Author)

76 FR 3175 - Proposed Extension of Existing Information Collection; Hoist Operators' Physical Fitness

Science.gov (United States)

2011-01-19

... Extension of Existing Information Collection; Hoist Operators' Physical Fitness AGENCY: Mine Safety and... fitness. DATES: All comments must be received by midnight Eastern Standard Time on March 21, 2011... 56.19057 and 57.19057 require the annual examination and certification of hoist operators' fitness by...

Research in atomic and applied physics using a 6-GeV synchrotron source

International Nuclear Information System (INIS)

Jones, K.W.

1985-12-01

The Division of Atomic and Applied Physics in the Department of Applied Science at Brookhaven National Laboratory conducts a broad program of research using ion beams and synchrotron radiation for experiments in atomic physics and nuclear analytical techniques and applications. Many of the experiments would benefit greatly from the use of high energy, high intensity photon beams from a 6-GeV synchrotron source. A survey of some of the specific scientific possibilities is presented

Meta-Structures: The Search of Coherence in Collective Behaviours (without Physics

Directory of Open Access Journals (Sweden)

Eliano Pessa

2013-09-01

Full Text Available This contribution shortly outlines and reviews a theoretical and computational approach for a theory of change concerning systems where it is not possible to apply the laws of motion ab initio. The concept of meta-structure relates to the emergence of forms of spatiotemporal coherences in collective behaviours intended as coherent sequences of multiple structures. The essential difference compared with traditional methods is the role of the cognitive design by the observer when identifying multiple mesoscopic variables. The goal is both to study the "change without physics" of the dynamics of change and to design non-catastrophic interventions having the purpose to induce, change, keep or restore collective behaviours by influencing -at the mesoscopic level -and not prescribing explicit rules and changes.

Data Release Report for Source Physics Experiment 1 (SPE-1), Nevada National Security Site

Energy Technology Data Exchange (ETDEWEB)

Townsend, Margaret [NSTec; Mercadente, Jennifer [NSTec

2014-04-28

The first Source Physics Experiment shot (SPE-1) was conducted in May 2011. The explosive source was a ~100-kilogram TNT-equivalent chemical set at a depth of 60 meters. It was recorded by an extensive set of instrumentation that includes sensors both at near-field (less than 100 meters) and far-field (more than 100 meters) distances. The near-field instruments consisted of three-component accelerometers deployed in boreholes around the shot and a set of singlecomponent vertical accelerometers on the surface. The far-field network comprised a variety of seismic and acoustic sensors, including short-period geophones, broadband seismometers, three-component accelerometers, and rotational seismometers at distances of 100 meters to 25 kilometers. This report coincides with the release of these data for analysts and organizations that are not participants in this program. This report describes the first Source Physics Experiment and the various types of near-field and far-field data that are available.

78 FR 69703 - 10-Day Notice of Proposed Information Collection: Generic Customer Satisfaction Surveys; Physical...

Science.gov (United States)

2013-11-20

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5683-N-102] 10-Day Notice of Proposed Information Collection: Generic Customer Satisfaction Surveys; Physical Inspection Pilot Program...

cPath: open source software for collecting, storing, and querying biological pathways

Directory of Open Access Journals (Sweden)

Gross Benjamin E

2006-11-01

Full Text Available Abstract Background Biological pathways, including metabolic pathways, protein interaction networks, signal transduction pathways, and gene regulatory networks, are currently represented in over 220 diverse databases. These data are crucial for the study of specific biological processes, including human diseases. Standard exchange formats for pathway information, such as BioPAX, CellML, SBML and PSI-MI, enable convenient collection of this data for biological research, but mechanisms for common storage and communication are required. Results We have developed cPath, an open source database and web application for collecting, storing, and querying biological pathway data. cPath makes it easy to aggregate custom pathway data sets available in standard exchange formats from multiple databases, present pathway data to biologists via a customizable web interface, and export pathway data via a web service to third-party software, such as Cytoscape, for visualization and analysis. cPath is software only, and does not include new pathway information. Key features include: a built-in identifier mapping service for linking identical interactors and linking to external resources; built-in support for PSI-MI and BioPAX standard pathway exchange formats; a web service interface for searching and retrieving pathway data sets; and thorough documentation. The cPath software is freely available under the LGPL open source license for academic and commercial use. Conclusion cPath is a robust, scalable, modular, professional-grade software platform for collecting, storing, and querying biological pathways. It can serve as the core data handling component in information systems for pathway visualization, analysis and modeling.

Secondary school physics teachers' conceptions of scientific evidence: A collective case study

Science.gov (United States)

Taylor, Joseph A.

Engaging secondary school students in inquiry-oriented tasks that more closely simulate the scholarly activities of scientists has been recommended as a way to improve scientific literacy. Two tasks that are frequently recommended include students' design of original experiments, and students' evaluation of scientific evidence and conclusions. Yet, little is known about teachers' conceptions of experimentation. The principal aim of this study, therefore, was to describe the nature of prospective and practicing physics teachers' conceptions of scientific evidence. More specifically, the following research questions guided this study: (1) What types of issues related to the measurement reliability and experimental validity of scientific evidence do practicing and prospective physics teachers think about when designing experiments? (2) When presented with hypothetical scenarios that describe unsound experimental procedures or poorly supported conclusions (or both), what concerns will prospective and practicing physics teachers raise? And (3) When the participants' responses to parallel research prompts are compared across protocols, what similarities and differences exist? The nature of the teacher-participants' conceptions was described from an analysis of data collected from research prompts such as interviews and hand written artifacts. In these research prompts, the teachers "thought aloud" while designing experiments and critically evaluated student-collected evidence presented in hypothetical classroom scenarios. The data from this study suggested that the three teachers, while contemplating the reliability and validity of scientific evidence, frequently used their conceptions of evidence in conjunction with specific subject matter conceptions. The data also indicated that the relationship between subject matter knowledge and conceptions of evidence was more pronounced for some conceptions of evidence than for others. Suggestions for future research included

Double radio sources and the new approach to cosmic plasma physics

International Nuclear Information System (INIS)

Alfven, H.

1977-08-01

The methodology of cosmic plasma physics is discussed. A summary is given of laboratory investigations of electric double layers, a phenomenon which is known to be very important in laboratory discharges. The importance of electric double layers in the Earth's surrounding is established. The scaling laws between laboratory and magnetospheric double layers are studied. A further extrapolation to galactic phenomena leads to a theory of double radio sources. From analogy with laboratory and magnetospheric current systems it is argued that the galactic current might produce double layers where a large energy dissipation takes place. This leads to a theory of the double radio sources which within the necessary wide limits of uncertainty is quantitatively reconcilable with observations. (author)

Requirements for the register of physical persons for the preparation, use and handling radioactive sources

International Nuclear Information System (INIS)

1998-07-01

This norm establishes the process for register of superior level profession nals enabled to the preparation, using, and handling of radioactive sources. This norm applies to the physical persons candidates applying to the register for preparation, use and handling of radioactive sources in radioactive installations at the industry, agriculture, teaching and researching

Developing a Test Collection for the Evaluation of Integrated Search

DEFF Research Database (Denmark)

Lykke, Marianne; Larsen, Birger; Lund, Haakon

2010-01-01

he poster discusses the characteristics needed in an information retrieval (IR) test collection to facilitate the evaluation of integrated search, i.e. search across a range of different sources but with one search box and one ranked result list, and describes and analyses a new test collection c...... assessments. The test collection may be used for systems- as well as user-oriented evaluation.......he poster discusses the characteristics needed in an information retrieval (IR) test collection to facilitate the evaluation of integrated search, i.e. search across a range of different sources but with one search box and one ranked result list, and describes and analyses a new test collection...... constructed for this purpose. The test collection consists of approx. 18,000 monographic records, 160,000 papers and journal articles in PDF and 275,000 abstracts with a varied set of metadata and vocabularies from the physics domain, 65 topics based on real work tasks and corresponding graded relevance...

Composition of source-sorted municipal organic waste collected in Danish cities

DEFF Research Database (Denmark)

Hansen, Trine Lund; Jansen, Jes La Cour; Spliid, Henrik

2007-01-01

Source-sorted municipal organic waste from different dwelling types in five Danish cities was sampled during one year. The samples were from permanent, full-scale systems or temporary, experimental systems for collection of source-sorted municipal organic waste. Pre-treatment of the organic waste...... prior to biological treatment was used in all cities to remove foreign objects and provide size reduction. All sampling was performed after pre-treatment in order to obtain more homogeneous and representative samples. The sampling included both the pre-treated waste and the reject from the pre......-treatment allowing for estimation of the composition of the original waste. A total of 40 waste samples were chemically characterised with respect to 15 parameters. The waste generally consisted of around 88% VS of which an average of 80% was easily degradable. The average content of N, P and K in the dry matter...

Physical Properties and Lung Deposition of Particles Emitted from Five Major Indoor Sources.

Czech Academy of Sciences Publication Activity Database

Tuan, V.Vu.; Ondráček, Jakub; Ždímal, Vladimír; Schwarz, Jaroslav; Delgado-Saborit, J.M.; Harrison, R. M.

2016-01-01

Roč. 10, č. 1 (2016), s. 1-14 ISSN 1873-9318 EU Projects: European Commission(XE) 315760 - HEXACOMM Institutional support: RVO:67985858 Keywords : indoor sources * particle size * hygroscopic growth Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.184, year: 2016

Cash Management, Revenue Sources and Cost Effective Methods of Revenue Collection at Local Government Level

OpenAIRE

Mustapha Gimba Kumshe; Kagu Bukar

2013-01-01

The main objective of this paper was to focus on the elements, objectives, goals and importance of cash management; and also to examine the sources of revenue and cost effective collections for local governments. The elements of cash management are identified as establishing bank relations, preparing cash flow statements, estimating collection receipts and analyzing cash flow and preparing a budget. Amongst the objectives of cash management is to ensure availability of cash resources at all t...

Waste collection in developing countries - Tackling occupational safety and health hazards at their source

Energy Technology Data Exchange (ETDEWEB)

Bleck, Daniela, E-mail: bleck.daniela@baua.bund.de [Federal Institute for Occupational Safety and Health, Germany (BAuA), Friedrich Henkel Weg 1-25, 44149 Dortmund (Germany); Wettberg, Wieland, E-mail: wettberg.wieland@baua.bund.de [Federal Institute for Occupational Safety and Health, Germany (BAuA), Friedrich Henkel Weg 1-25, 44149 Dortmund (Germany)

2012-11-15

Waste management procedures in developing countries are associated with occupational safety and health risks. Gastro-intestinal infections, respiratory and skin diseases as well as muscular-skeletal problems and cutting injuries are commonly found among waste workers around the globe. In order to find efficient, sustainable solutions to reduce occupational risks of waste workers, a methodological risk assessment has to be performed and counteractive measures have to be developed according to an internationally acknowledged hierarchy. From a case study in Addis Ababa, Ethiopia suggestions for the transferral of collected household waste into roadside containers are given. With construction of ramps to dump collected household waste straight into roadside containers and an adaptation of pushcarts and collection procedures, the risk is tackled at the source.

Reflection processing of the large-N seismic data from the Source Physics Experiment (SPE)

Energy Technology Data Exchange (ETDEWEB)

Paschall, Olivia C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-07-18

The purpose of the SPE is to develop a more physics-based model for nuclear explosion identification to understand the development of S-waves from explosion sources in order to enhance nuclear test ban treaty monitoring.

Toward the fundamental theory of nuclear matter physics: The microscopic theory of nuclear collective dynamics

International Nuclear Information System (INIS)

Sakata, F.; Marumori, T.; Hashimoto, Y.; Tsukuma, H.; Yamamoto, Y.; Terasaki, J.; Iwasawa, Y.; Itabashi, H.

1992-01-01

Since the research field of nuclear physics is expanding rapidly, it is becoming more imperative to develop the microscopie theory of nuclear matter physics which provides us with a unified understanding of diverse phenomena exhibited by nuclei. An estabishment of various stable mean-fields in nuclei allows us to develop the microscopie theory of nuclear collective dynamics within the mean-field approximation. The classical-level theory of nuclear collective dynamics is developed by exploiting the symplectic structure of the timedependent Hartree-Fock (TDHF)-manifold. The importance of exploring the single-particle dynamics, e.g. the level-crossing dynamics in connection with the classical order-to-chaos transition mechanism is pointed out. Since the classical-level theory os directly related to the full quantum mechanical boson expansion theory via the symplectic structure of the TDHF-manifold, the quantum theory of nuclear collective dynamics is developed at the dictation of what os developed on the classical-level theory. The quantum theory thus formulated enables us to introduce the quantum integrability and quantum chaoticity for individual eigenstates. The inter-relationship between the classical-level and quantum theories of nuclear collective dynamics might play a decisive role in developing the quantum theory of many-body problems. (orig.)

Collection and Analysis of Open Source News for Information Awareness and Early Warning in Nuclear Safeguards

International Nuclear Information System (INIS)

Cojazzi, Giacomo G.M.; Van Der Goot, Erik; Verile, Marco; Wolfart, Erik; Rutan Fowler, Marcy; Feldman, Yana; Hammond, William; Schweighardt, John; Ferguson, Mattew

2013-01-01

Acquisition and analysis of open source information plays an increasingly important role in the IAEA’s move towards safeguards implementation based on all safeguards relevant information known about a State. The growing volume of open source information requires the development of technology and tools capable of effectively collecting relevant information, filtering out “noise”, organizing valuable information in a clear and accessible manner, and assessing its relevance. In this context, the IAEA’s Division of Information Management (SGIM) and the EC’s Joint Research Centre (JRC) are currently implementing a joint project to advance the effectiveness and efficiency of the IAEA’s workflow for open source information collection and analysis. The objective is to provide tools to support SGIM in the production of the SGIM Open Source Highlights, which is a daily news brief consisting of the most pertinent news stories relevant to safeguards and non-proliferation. The process involves the review and selection of hundreds of articles from a wide array of specifically selected sources. The joint activity exploits the JRC’s Europe Media Monitor (EMM) and NewsDesk applications: EMM automatically collects and analyses news articles from a pre-defined list of web sites, and NewsDesk allows an analyst to manually select the most relevant articles from the EMM stream for further processing. The paper discusses the IAEA’s workflow for the production of SGIM Open Source Highlights and describes the capabilities of EMM and NewsDesk. It then provides an overview of the joint activities since the project started in 2011, which were focused i) on setting up a separate EMM installation dedicated to the nuclear safeguards and security domain (Nuclear Security Media Monitor, NSMM) and ii) on evaluating the NSMM/NewsDesk for meeting the IAEA’s needs. Finally, it presents the current use NSMM/NewsDesk at the IAEA and proposes options for further integration with the

Nuclear Physics Meets the Sources of the Ultra-High Energy Cosmic Rays.

Science.gov (United States)

Boncioli, Denise; Fedynitch, Anatoli; Winter, Walter

2017-07-07

The determination of the injection composition of cosmic ray nuclei within astrophysical sources requires sufficiently accurate descriptions of the source physics and the propagation - apart from controlling astrophysical uncertainties. We therefore study the implications of nuclear data and models for cosmic ray astrophysics, which involves the photo-disintegration of nuclei up to iron in astrophysical environments. We demonstrate that the impact of nuclear model uncertainties is potentially larger in environments with non-thermal radiation fields than in the cosmic microwave background. We also study the impact of nuclear models on the nuclear cascade in a gamma-ray burst radiation field, simulated at a level of complexity comparable to the most precise cosmic ray propagation code. We conclude with an isotope chart describing which information is in principle necessary to describe nuclear interactions in cosmic ray sources and propagation.

Certification of model spectrometric alpha sources (MSAS) and problems of the MSAS system improvement

International Nuclear Information System (INIS)

Belyatskij, A.F.; Gejdel'man, A.M.; Egorov, Yu.S.; Nedovesov, V.G.; Chechev, V.P.

1984-01-01

Results of certification of standard spectrometric alpha sources (SSAS) of industrial production are presented: methods for certification by main radiation physical parameters: proper halfwidth of α-lines, activity of radionuclides in the source, energies of α-particle emitting sources and relative intensity of different energy α-particle groups - are analysed. The advantage for the SSAS system improvement - a set of model measures for α-radiation, a collection of interconnected data units on physical, engineering and design characteristics of SSAS, methods for their obtaining and determination, on instruments used, is considered

Overview of physical safety of radiation sources in Brazil; Panorama da segurança física de fontes radioativoas no Brasil

Energy Technology Data Exchange (ETDEWEB)

Lima, A.R.; Silva, F.C.A. da, E-mail: alexandre.lima@cnen.gov.br [Comissão Nacional de Energia Nuclear (DRS/CNEN), Rio de Janeiro, RJ (Brazil). Escritorio de Segurança Física; Filho, J.S.M.; Tavares, R.L.A. [Instituto de Radioproteção e Dosimetria (IRD/CNEN -RJ), Rio de Janeiro, RJ (Brazil)

2017-07-01

The threat of 'radiological terrorism' has been recognized worldwide after the event of September 11, 2001. Radioactive sources can be used for the development of DDR ('dirty bomb') devices. Studies show that the use of a DDR could cause health damage, psychosocial and economic and environmental damage. Brazil follows this worldwide concern, since it has a large medical-industrial park that uses radioactive sources. This paper presents an overview of the physical safety of radioactive sources in Brazil, based on the inventory of radiative facilities, regulatory aspects and international recommendations. For the preparation of the study, the database of radioactive sources of the regulatory body, the current normative status and the international recommendations were used. In Brazil there are approximately 2,500 radiative installations, with about 400 radioactive sources Category 1 and 2, which are the biggest concern in terms of physical safety. The Brazilian licensing standard addresses only some aspects of physical protection, not providing a clear orientation for the elaboration and implementation of physical protection systems, in accordance with international recommendations. For Brazil to be included in the world scenario of physical safety of radioactive sources, it is urgent to elaborate specific legislation with well-defined regulatory criteria. The lack of more detailed requirements makes it difficult to make a more careful regulatory assessment of the physical protection conditions of the facilities, either through the evaluation of plans and other physical protection documents or through regulatory inspections.

NATO Advanced Study Institute on Physics of New Laser Sources

CERN Document Server

Arecchi, F; Mooradian, Aram; Sona, Alberto

1985-01-01

This volume contains the lectures and seminars presented at the NATO Advanced Study Institute on "Physics of New Laser Sources", the twelfth course of the Europhysics School of Quantum Electronics, held under the supervision of the Quantum Electronics Division of the European Physical Society. The Institute was held at Centro "I Cappuccini" San Miniato, Tuscany, July 11-21, 1984. The Europhysics School of Quantum Electronics was started in 1970 with the aim of providing instruction for young researchers and advanced students already engaged in the area of quantum electronics or for those wishing to switch into this area after working previously in other areas. From the outset, the School has been under the direction of Prof. F. T. Arecchi, then at the University of Pavia, now at the University of Florence, and Dr. D. Roess of Heraeus, Hanau. In 1981, Prof. H. Walther, University of Munich and Max-Planck Institut fur Quantenoptik joined as co-director. Each year the Directors choose a subj~ct of particular int...

Physical restraint use among nursing home residents: A comparison of two data collection methods

Directory of Open Access Journals (Sweden)

Voyer Philippe

2004-10-01

Full Text Available Abstract Background In view of the issues surrounding physical restraint use, it is important to have a method of measurement as valid and reliable as possible. We determined the sensitivity and specificity of physical restraint use a reported by nursing staff and b reviewed from medical and nursing records in nursing home settings, by comparing these methods with direct observation. Methods We sampled eight care units in skilled nursing homes, seven care units in nursing homes and one long-term care unit in a hospital, from eight facilities which included 28 nurses and 377 residents. Physical restraint use was assessed the day following three periods of direct observation by two different means: interview with one or several members of the regular nursing staff, and review of medical and nursing records. Sensitivity and specificity values were calculated according to 2-by-2 contingency tables. Differences between the methods were assessed using the phi coefficient. Other information collected included: demographic characteristics, disruptive behaviors, body alignment problems, cognitive and functional skills. Results Compared to direct observation (gold standard, reported restraint use by nursing staff yielded a sensitivity of 87.4% at a specificity of 93.7% (phi = 0.84. When data was reviewed from subjects' medical and nursing records, sensitivity was reduced to 74.8%, and specificity to 86.3% (phi = 0.54. Justifications for restraint use including risk for falls, agitation, body alignment problems and aggressiveness were associated with the use of physical restraints. Conclusions The interview of nursing staff and the review of medical and nursing records are both valid and reliable techniques for measuring physical restraint use among nursing home residents. Higher sensitivity and specificity values were achieved when nursing staff was interviewed as compared to reviewing medical records. This study suggests that the interview of nursing

Health physics source document for codes of practice

International Nuclear Information System (INIS)

Pearson, G.W.; Meggitt, G.C.

1989-05-01

Personnel preparing codes of practice often require basic Health Physics information or advice relating to radiological protection problems and this document is written primarily to supply such information. Certain technical terms used in the text are explained in the extensive glossary. Due to the pace of change in the field of radiological protection it is difficult to produce an up-to-date document. This document was compiled during 1988 however, and therefore contains the principle changes brought about by the introduction of the Ionising Radiations Regulations (1985). The paper covers the nature of ionising radiation, its biological effects and the principles of control. It is hoped that the document will provide a useful source of information for both codes of practice and wider areas and stimulate readers to study radiological protection issues in greater depth. (author)

Health physics evaluation of an accident involving acute overexposure to a radiography source

International Nuclear Information System (INIS)

Basson, J.K.; Hanekom, A.P.; Coetzee, F.C.; Lloyd, D.C.

1981-10-01

An accident, involving the loss of an iridium-192 radiographic source and the subsequent serious overexposure of a third party, is described. Health physics aspects, particularly dosimetrical aspects are addressed and compared with results obtained by means of chromosome aberration dosimetry. Details are provided on the medical observations and treatment of the patient [af

Point Pollution Sources Dimensioning

Directory of Open Access Journals (Sweden)

Georgeta CUCULEANU

2011-06-01

Full Text Available In this paper a method for determining the main physical characteristics of the point pollution sources is presented. It can be used to find the main physical characteristics of them. The main physical characteristics of these sources are top inside source diameter and physical height. The top inside source diameter is calculated from gas flow-rate. For reckoning the physical height of the source one takes into account the relation given by the proportionality factor, defined as ratio between the plume rise and physical height of the source. The plume rise depends on the gas exit velocity and gas temperature. That relation is necessary for diminishing the environmental pollution when the production capacity of the plant varies, in comparison with the nominal one.

Dynamic rupture scenarios from Sumatra to Iceland - High-resolution earthquake source physics on natural fault systems

Science.gov (United States)

Gabriel, Alice-Agnes; Madden, Elizabeth H.; Ulrich, Thomas; Wollherr, Stephanie

2017-04-01

Capturing the observed complexity of earthquake sources in dynamic rupture simulations may require: non-linear fault friction, thermal and fluid effects, heterogeneous fault stress and fault strength initial conditions, fault curvature and roughness, on- and off-fault non-elastic failure. All of these factors have been independently shown to alter dynamic rupture behavior and thus possibly influence the degree of realism attainable via simulated ground motions. In this presentation we will show examples of high-resolution earthquake scenarios, e.g. based on the 2004 Sumatra-Andaman Earthquake, the 1994 Northridge earthquake and a potential rupture of the Husavik-Flatey fault system in Northern Iceland. The simulations combine a multitude of representations of source complexity at the necessary spatio-temporal resolution enabled by excellent scalability on modern HPC systems. Such simulations allow an analysis of the dominant factors impacting earthquake source physics and ground motions given distinct tectonic settings or distinct focuses of seismic hazard assessment. Across all simulations, we find that fault geometry concurrently with the regional background stress state provide a first order influence on source dynamics and the emanated seismic wave field. The dynamic rupture models are performed with SeisSol, a software package based on an ADER-Discontinuous Galerkin scheme for solving the spontaneous dynamic earthquake rupture problem with high-order accuracy in space and time. Use of unstructured tetrahedral meshes allows for a realistic representation of the non-planar fault geometry, subsurface structure and bathymetry. The results presented highlight the fact that modern numerical methods are essential to further our understanding of earthquake source physics and complement both physic-based ground motion research and empirical approaches in seismic hazard analysis.

Habitual Intakes, Food Sources and Excretions of Phosphorus and Calcium in Three German Study Collectives

Directory of Open Access Journals (Sweden)

Ulrike Trautvetter

2018-02-01

Full Text Available Phosphorus intake in Europe is far above recommendations. We present baseline data from three human intervention studies between 2006 and 2014 regarding intake and excretion of phosphorus and calcium. All subjects documented their nutritional habits in weighed dietary records. Fasting blood samples were drawn, and feces and urine were quantitatively collected. Dietary phosphorus intake was estimated based on weighed dietary records and urine phosphorus excretions. Food sources were identified by allocation to defined food product groups. Average phosphorus consumption was 1338 mg/day and did not change from 2006 to 2014, while calcium intake decreased during this period (1150 to 895 mg/day. The main sources for phosphorus intake were bread/cereal products, milk/milk products and meat/meat products/sausage products and the main sources of calcium intake included milk/milk products/cheese, bread/cereal products and beverages. There was no difference between estimated phosphorus intake from the weighed dietary records and urine phosphorus excretion. In conclusion, we demonstrated constant phosphorus intakes far above the recommendations and decreasing calcium intakes below the recommendations in three German collectives from 2006 to 2014. Furthermore, we could show in case of usual intakes that an estimated phosphorus intake from urine phosphorus excretion is similar to the calculated intake from weighed dietary records.

The Detector Physics and Applications Center - DePAC

CERN Document Server

Plothow-Besch, H; Fiorini, C; Grupen, C; Hassard, J; Longoni, A; Walenta, Albert H

2001-01-01

A new project, the 'Detector Physics and Applications Center (DePAC)', is presented. DePAC is a general detector and sensor database, which is not application specific, on the Internet. DePAC collects and explains the physics, the technology and the application of a wide range of radiation detectors. DePAC also collects and describes information about noise problems, front-end electronics, data transfer, processing and storage. DePAC provides short write-ups and source code of all sorts of detector related software depending on availability. DePAC collects useful constants and properties of materials in an exhaustive series of tables and graphs. DePAC also acts as a point of contact for researchers and industry in an interdisciplinary way, e.g. in biology, in medicine, in materials research and in high energy or nuclear physics. Last but not least, DePAC aims to develop also into a virtual lecturing school and serves as a tutorial for students and all interested scientists.

The Detector Physics and Applications Center—DePAC

Science.gov (United States)

Plothow-Besch, H.; Besch, H.-J.; Fiorini, C.; Grupen, C.; Hassard, J.; Longoni, A.; Walenta, A. H.

2001-09-01

A new project, the "Detector Physics and Applications Center (DePAC)", is presented. DePAC is a general detector and sensor database, which is not application specific, on the Internet. DePAC collects and explains the physics, the technology and the application of a wide range of radiation detectors. DePAC also collects and describes information about noise problems, front-end electronics, data transfer, processing and storage. DePAC provides short write-ups and source code of all sorts of detector related software depending on availability. DePAC collects useful constants and properties of materials in an exhaustive series of tables and graphs. DePAC also acts as a point of contact for researchers and industry in an interdisciplinary way, e.g. in biology, in medicine, in materials research and in high energy or nuclear physics. Last but not least, DePAC aims to develop also into a virtual lecturing school and serves as a tutorial for students and all interested scientists.

The Detector Physics and Applications Center - DePAC

International Nuclear Information System (INIS)

Plothow-Besch, H.; Besch, H.-J.; Fiorini, C.; Grupen, C.; Hassard, J.; Longoni, A.; Walenta, A.H.

2001-01-01

A new project, the 'Detector Physics and Applications Center (DePAC)', is presented. DePAC is a general detector and sensor database, which is not application specific, on the Internet. DePAC collects and explains the physics, the technology and the application of a wide range of radiation detectors. DePAC also collects and describes information about noise problems, front-end electronics, data transfer, processing and storage. DePAC provides short write-ups and source code of all sorts of detector related software depending on availability. DePAC collects useful constants and properties of materials in an exhaustive series of tables and graphs. DePAC also acts as a point of contact for researchers and industry in an interdisciplinary way, e.g. in biology, in medicine, in materials research and in high energy or nuclear physics. Last but not least, DePAC aims to develop also into a virtual lecturing school and serves as a tutorial for students and all interested scientists

Single-particle and collective properties around closed shells probed by in-source laser spectroscopy

CERN Document Server

Cocolios, Thomas Elias; Van Duppen, P

2010-01-01

Resonant laser ionisation is a very versatile tool in nuclear physics, used for the production of clean radioactive ion beams as well as for the study of ground-state and isomer properties. In this Ph.D. work, many aspects of resonant laser ionisation are investigated, from improving the performance of laser ion sources at ISOL facilities to the measurement of magnetic dipole moments and charge radii. The LISOL gas catcher ion source relies on resonant laser ionisation for increased efficiency and selectivity. Using a $^{252}$Cf fission source, the element dependence of the non-resonant contribution to the ion beam has been investigated. The efficiency of extraction for a non-laser-ionised element ranges from 0.03% for krypton to 74% for ceasium. A relationship with the ionisation potential is proposed, although a few elements like rubidium and cerium do not verify this relationship. In order to suppress those non-resonantly-ionised elements, two new approaches are proposed. First, the dual-chamber gas catche...

Collective Odor Source Estimation and Search in Time-Variant Airflow Environments Using Mobile Robots

Science.gov (United States)

Meng, Qing-Hao; Yang, Wei-Xing; Wang, Yang; Zeng, Ming

2011-01-01

This paper addresses the collective odor source localization (OSL) problem in a time-varying airflow environment using mobile robots. A novel OSL methodology which combines odor-source probability estimation and multiple robots’ search is proposed. The estimation phase consists of two steps: firstly, the separate probability-distribution map of odor source is estimated via Bayesian rules and fuzzy inference based on a single robot’s detection events; secondly, the separate maps estimated by different robots at different times are fused into a combined map by way of distance based superposition. The multi-robot search behaviors are coordinated via a particle swarm optimization algorithm, where the estimated odor-source probability distribution is used to express the fitness functions. In the process of OSL, the estimation phase provides the prior knowledge for the searching while the searching verifies the estimation results, and both phases are implemented iteratively. The results of simulations for large-scale advection–diffusion plume environments and experiments using real robots in an indoor airflow environment validate the feasibility and robustness of the proposed OSL method. PMID:22346650

Waste collection in developing countries – Tackling occupational safety and health hazards at their source

International Nuclear Information System (INIS)

Bleck, Daniela; Wettberg, Wieland

2012-01-01

Waste management procedures in developing countries are associated with occupational safety and health risks. Gastro-intestinal infections, respiratory and skin diseases as well as muscular-skeletal problems and cutting injuries are commonly found among waste workers around the globe. In order to find efficient, sustainable solutions to reduce occupational risks of waste workers, a methodological risk assessment has to be performed and counteractive measures have to be developed according to an internationally acknowledged hierarchy. From a case study in Addis Ababa, Ethiopia suggestions for the transferral of collected household waste into roadside containers are given. With construction of ramps to dump collected household waste straight into roadside containers and an adaptation of pushcarts and collection procedures, the risk is tackled at the source.

Radioactive check sources for alpha and beta sensitive radiological instrumentation

International Nuclear Information System (INIS)

Barnett, J.M.; Kane, J.E. II.

1994-06-01

Since 1991, the Westinghouse Hanford Company has examined the construction and use of alpha and beta radioactive check sources for calibrating instruments and for performing response checks of instruments used for operational and environmental radiation detection. The purpose of using a radioactive check source is to characterize the response of a radiation monitoring instrument in the presence of radioactivity. To accurately calibrate the instrument and check its response, the check source used must emulate as closely as possible the actual physical and isotopic conditions being monitored. The isotope employed and the physical methods used to fabricate the check source (among other factors) determine instrument response. Although information from applicable national and international standards, journal articles, books, and government documents was considered, empirical data collected is most valuable when considering the type of source to use for a particular application. This paper presents source construction methods, use considerations, and standard recommendations. The results of a Hanford Site evaluation of several types of alpha and beta sources are also given

Physical models and primary design of reactor based slow positron source at CMRR

Science.gov (United States)

Wang, Guanbo; Li, Rundong; Qian, Dazhi; Yang, Xin

2018-07-01

Slow positron facilities are widely used in material science. A high intensity slow positron source is now at the design stage based on the China Mianyang Research Reactor (CMRR). This paper describes the physical models and our primary design. We use different computer programs or mathematical formula to simulate different physical process, and validate them by proper experiments. Considering the feasibility, we propose a primary design, containing a cadmium shield, a honeycomb arranged W tubes assembly, electrical lenses, and a solenoid. It is planned to be vertically inserted in the Si-doping channel. And the beam intensity is expected to be 5 ×109

Collective effects analysis for the Berkeley femtosource

International Nuclear Information System (INIS)

Corlett, J.; De Santis, S.; Wolski, A.; Zholents, A.

2003-01-01

We present an overview of the collective effects in a proposed ultrafast x-ray facility, based on a recirculating linac. The facility requires a small vertical ewmittance of 0.4 mm-mrad and is designed to operate with a ''flat bunch'' with a large aspect ratio of emittances. Emittance control from the electron source at the RF photocathode to the photon production chain of undulators, and understanding and the mitigation of collective effects is critical to a successful machine operation. Key aspects of accelerator physics involved in beam break-up, coherent synchrotron radiation, resistive wall impedance and other effects have been addressed and reported here

The Advanced Light Source: A new tool for research in atomic and molecular physics

International Nuclear Information System (INIS)

Schlachter, F.; Robinson, A.

1991-04-01

The Advanced Light Source at the Lawrence Berkeley Laboratory will be the world's brightest synchrotron radiation source in the extreme ultraviolet and soft x-ray regions of the spectrum when it begins operation in 1993. It will be available as a national user facility to researchers in a broad range of disciplines, including materials science, atomic and molecular physics, chemistry, biology, imaging, and technology. The high brightness of the ALS will be particularly well suited to high-resolution studies of tenuous targets, such as excited atoms, ions, and clusters. 13 figs., 4 tabs

Sources and evolution of quantum physics

International Nuclear Information System (INIS)

Escoubes, B.

2005-01-01

The author has gathered in this book the founder articles of fundamental physics to illustrate the way how physics'ideas and concepts have emerged to form the modern physics we know today. The book is divided into 6 chapters: 1) from the Greek idea of matter to the discovery of radioactivity, 2) from relativity to quantification, 3) the devising of quantum mechanics, 4) from relativistic quantum mechanics to quantum field theory, 5) the great moments of particle physics, and 6) towards the great unification. 19 articles have been selected to illustrate the milestones of physics. Most are reproduced in full in their original texts. Among them we can find the article of Einstein about the existence of the photon, or the article of Pauli in which the exclusion principle is drafted or the article of Yukawa about the existence of the meson. The theoretical advances proposed in the articles are highlighted and put into perspective in discerning commentaries set in the different chapters. (A.C.)

Smartphone audio port data collection cookbook

Directory of Open Access Journals (Sweden)

Kyle Forinash

2018-06-01

Full Text Available The audio port of a smartphone is designed to send and receive audio but can be harnessed for portable, economical, and accurate data collection from a variety of sources. While smartphones have internal sensors to measure a number of physical phenomena such as acceleration, magnetism and illumination levels, measurement of other phenomena such as voltage, external temperature, or accurate timing of moving objects are excluded. The audio port cannot be only employed to sense external phenomena. It has the additional advantage of timing precision; because audio is recorded or played at a controlled rate separated from other smartphone activities, timings based on audio can be highly accurate. The following outlines unpublished details of the audio port technical elements for data collection, a general data collection recipe and an example timing application for Android devices.

Life cycle and economic assessment of source-separated MSW collection with regard to greenhouse gas emissions: a case study in China.

Science.gov (United States)

Dong, Jun; Ni, Mingjiang; Chi, Yong; Zou, Daoan; Fu, Chao

2013-08-01

In China, the continuously increasing amount of municipal solid waste (MSW) has resulted in an urgent need for changing the current municipal solid waste management (MSWM) system based on mixed collection. A pilot program focusing on source-separated MSW collection was thus launched (2010) in Hangzhou, China, to lessen the related environmental loads. And greenhouse gas (GHG) emissions (Kyoto Protocol) are singled out in particular. This paper uses life cycle assessment modeling to evaluate the potential environmental improvement with regard to GHG emissions. The pre-existing MSWM system is assessed as baseline, while the source separation scenario is compared internally. Results show that 23 % GHG emissions can be decreased by source-separated collection compared with the base scenario. In addition, the use of composting and anaerobic digestion (AD) is suggested for further optimizing the management of food waste. 260.79, 82.21, and -86.21 thousand tonnes of GHG emissions are emitted from food waste landfill, composting, and AD, respectively, proving the emission reduction potential brought by advanced food waste treatment technologies. Realizing the fact, a modified MSWM system is proposed by taking AD as food waste substitution option, with additional 44 % GHG emissions saved than current source separation scenario. Moreover, a preliminary economic assessment is implemented. It is demonstrated that both source separation scenarios have a good cost reduction potential than mixed collection, with the proposed new system the most cost-effective one.

Validation of secondary commercial data sources for physical activity facilities in urban and nonurban settings.

Science.gov (United States)

Han, Euna; Powell, Lisa; Slater, Sandy; Quinn, Christopher

2012-11-01

Secondary data are often necessary to assess the availability of commercial physical activity (PA) facilities and examine its association with individual behaviors and outcomes, yet the validity of such sources has been explored only in a limited number of studies. Field data were collected on the presence and attributes of commercial PA facilities in a random sample of 30 urban, 15 suburban, and 15 rural Census tracts in the Chicago metropolitan statistical area and surrounding area. Approximately 40% of PA establishments in the field data were listed for both urban and nonurban tracts in both lists except for nonurban tracts in D&B (35%), which was significantly improved in the combined list of D&B and InfoUSA. Approximately one-quarter of the PA facilities listed in D&B were found on the ground, whereas 40% to 50% of PA facilities listed in InfoUSA were found on the ground. PA establishments that offered instruction programs or lessons or that had a court or pool were less likely to be listed, particularly in the nonurban tracts. Secondary commercial business lists on PA facilities should be used with caution in assessing the built environment.

Case Report: Rhabdomyolysis in Service Member Following SERE Physical Training

Science.gov (United States)

2017-09-19

hour per response, including the time tor reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and...completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of...Member following SERE physical training. Sb. GRANT NUMBER Sc. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER Capt Matthew A Pombo Se. TASK

Atomic physics at the Argonne PII ECR [electron cyclotron resonance] Ion Source

International Nuclear Information System (INIS)

Dunford, R.W.; Berry, H.G.; Billquist, P.J.; Pardo, R.C.; Zabransky, B.J.; Bakke, E.; Groeneveld, K.O.; Hass, M.; Raphaelian, M.L.A.

1987-01-01

An atomic physics beam line has been set up at the Argonne PII ECR Ion Source. The source is on a 350-kV high-voltage platform which is a unique feature of particular interest in work on atomic collisions. We describe our planned experimental program which includes: measurement of state-selective electron-capture cross sections, studies of doubly-excited states, precision spectroscopy of few-electron ions, tests of quantum electrodynamics, and studies of polarization transfer using optically pumped polarized alkali targets. The first experiments will be measurements of cross sections for electron capture into specific nl subshells in ion-atom collisions. Our method is to observe the characteristic radiation emitted after capture using a VUV spectrometer. Initial data from these experiments are presented. 12 refs., 4 figs

Informal proposal for an Atomic Physics Facility at the National Synchrotron Light Source

Energy Technology Data Exchange (ETDEWEB)

Jones, K.W.; Johnson, B.M.; Meron, M.

1986-01-01

An Atomic Physics Facility (APF) for experiments that will use radiation from a superconducting wiggler on the NSLS X-13 port is described. The scientific justification for the APF is given and the elements of the facility are discussed. It is shown that it will be possible to conduct a uniquely varied set of experiments that can probe most aspects of atomic physics. A major component of the proposal is a heavy-ion storage ring capable of containing ions with energies of about 10 MeV/nucleon. The ring can be filled with heavy ions produced at the BNL MP Tandem Laboratory or from independent ion-source systems. A preliminary cost estimate for the facility is presented.

Special issue on compact x-ray sources

Science.gov (United States)

Hooker, Simon; Midorikawa, Katsumi; Rosenzweig, James

2014-04-01

Journal of Physics B: Atomic, Molecular and Optical Physics is delighted to announce a forthcoming special issue on compact x-ray sources, to appear in the winter of 2014, and invites you to submit a paper. The potential for high-brilliance x- and gamma-ray sources driven by advanced, compact accelerators has gained increasing attention in recent years. These novel sources—sometimes dubbed 'fifth generation sources'—will build on the revolutionary advance of the x-ray free-electron laser (FEL). New radiation sources of this type have widespread applications, including in ultra-fast imaging, diagnostic and therapeutic medicine, and studies of matter under extreme conditions. Rapid advances in compact accelerators and in FEL techniques make this an opportune moment to consider the opportunities which could be realized by bringing these two fields together. Further, the successful development of compact radiation sources driven by compact accelerators will be a significant milestone on the road to the development of high-gradient colliders able to operate at the frontiers of particle physics. Thus the time is right to publish a peer-reviewed collection of contributions concerning the state-of-the-art in: advanced and novel acceleration techniques; sophisticated physics at the frontier of FELs; and the underlying and enabling techniques of high brightness electron beam physics. Interdisciplinary research connecting two or more of these fields is also increasingly represented, as exemplified by entirely new concepts such as plasma based electron beam sources, and coherent imaging with fs-class electron beams. We hope that in producing this special edition of Journal of Physics B: Atomic, Molecular and Optical Physics (iopscience.iop.org/0953-4075/) we may help further a challenging mission and ongoing intellectual adventure: the harnessing of newly emergent, compact advanced accelerators to the creation of new, agile light sources with unprecedented capabilities

Solar Energy Education. Renewable energy activities for chemistry and physics

Energy Technology Data Exchange (ETDEWEB)

1985-01-01

Information on renewable energy sources is provided for students in this teachers' guide. With the chemistry and physics student in mind, solar energy topics such as absorber plate coatings for solar collectors and energy collection and storage methods are studied. (BCS)

Physical, chemical, and biological data collected in Weeks Bay, Alabama (June 1990 - May 2000) (NODC Accession 0116469)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Abstract: This dataset contains ten years of physical, chemical, and biological data collected during shipboard surveys in Weeks Bay, Alabama, between June 1990 and...

Administrators' Perceptions of Physical Education Teacher Evaluation

Science.gov (United States)

Norris, Jason M.; van der Mars, Hans; Kulinna, Pamela; Amrein-Beardsley, Audrey

2017-01-01

Purpose: Using a mixed methods approach, this study aimed to develop a better understanding of school administrators' perceptions of teacher evaluation systems, specific to physical education (PE). Method: This study used two sources of data collection: (a) a survey sent to administrators (n = 19) in one urban school district and (b) a formal…

Data Release Report for Source Physics Experiments 2 and 3 (SPE-2 and SPE-3) Nevada National Security Site

Energy Technology Data Exchange (ETDEWEB)

Townsend, Margaret [National Security Technologies, LLC, Las Vegas, NV (United States). Nevada Test Site; Obi, Curtis [National Security Technologies, LLC, Las Vegas, NV (United States). Nevada Test Site

2015-01-26

The second Source Physics Experiment shot (SPE-2) was conducted in Nevada on October 25, 2011, at 1900:00.011623 Greenwich Mean Time (GMT). The explosive source was 997 kilograms (kg) trinitrotoluene (TNT) equivalent of sensitized heavy ammonium fuel oil (SHANFO) detonated at a depth of 45.7 meters (m). The third Source Physics Experiment shot (SPE-3) was conducted in Nevada on July 24, 2012, at 1800:00.44835 GMT. The explosive source was 905 kg TNT equivalent of SHANFO detonated at a depth of 45.8 m. Both shots were recorded by an extensive set of instrumentation that includes sensors both at near-field (less than 100 m) and far-field (100 m or greater) distances. The near-field instruments consisted of three-component accelerometers deployed in boreholes at 15, 46, and 55 m depths around the shot and a set of single-component vertical accelerometers on the surface. The far-field network was composed of a variety of seismic and acoustic sensors, including short-period geophones, broadband seismometers, three-component accelerometers, and rotational seismometers at distances of 100 m to 25 kilometers. This report coincides with the release of these data for analysts and organizations that are not participants in this program. This report describes the second and third Source Physics Experiment shots and the various types of near-field and far-field data that are available.

Variability in physical contamination assessment of source segregated biodegradable municipal waste derived composts.

Science.gov (United States)

Echavarri-Bravo, Virginia; Thygesen, Helene H; Aspray, Thomas J

2017-01-01

Physical contaminants (glass, metal, plastic and 'other') and stones were isolated and categorised from three finished commercial composts derived from source segregated biodegradable municipal waste (BMW). A subset of the identified physical contaminant fragments were subsequently reintroduced into the cleaned compost samples and sent to three commercial laboratories for testing in an inter-laboratory trial using the current PAS100:2011 method (AfOR MT PC&S). The trial showed that the 'other' category caused difficulty for all three laboratories with under reporting, particularly of the most common 'other' contaminants (paper and cardboard) and, over-reporting of non-man-made fragments. One laboratory underreported metal contaminant fragments (spiked as silver foil) in three samples. Glass, plastic and stones were variably underreported due to miss-classification or over reported due to contamination with compost (organic) fragments. The results are discussed in the context of global physical contaminant test methods and compost quality assurance schemes. Copyright © 2016 Elsevier Ltd. All rights reserved.

Collective Focusing of Intense Ion Beam Pulses for High-energy Density Physics Applications

International Nuclear Information System (INIS)

Dorf, Mikhail A.; Kaganovich, Igor D.; Startsev, Edward A.; Davidson, Ronald C.

2011-01-01

The collective focusing concept in which a weak magnetic lens provides strong focusing of an intense ion beam pulse carrying a neutralizing electron background is investigated by making use of advanced particle-in-cell simulations and reduced analytical models. The original analysis by Robertson Phys. Rev. Lett. 48, 149 (1982) is extended to the parameter regimes of particular importance for several high-energy density physics applications. The present paper investigates (1) the effects of non-neutral collective focusing in a moderately strong magnetic field; (2) the diamagnetic effects leading to suppression of the applied magnetic field due to the presence of the beam pulse; and (3) the influence of a finite-radius conducting wall surrounding the beam cross-section on beam neutralization. In addition, it is demonstrated that the use of the collective focusing lens can significantly simplify the technical realization of the final focusing of ion beam pulses in the Neutralized Drift Compression Experiment-I (NDCX-I), and the conceptual designs of possible experiments on NDCX-I are investigated by making use of advanced numerical simulations.

Data archiving in experimental physics

International Nuclear Information System (INIS)

Dalesio, L.R.; Watson, W. III; Bickley, M.; Clausen, M.

1998-01-01

In experimental physics, data is archived from a wide variety of sources and used for a wide variety of purposes. In each of these environments, trade-offs are made between data storage rate, data availability, and retrieval rate. This paper presents archive alternatives in EPICS, the overall archiver design and details on the data collection and retrieval requirements, performance studies, design choices, design alternatives, and measurements made on the beta version of the archiver

RECOMMENDED OPERATING PROCEDURE NO. 56: COLLECTION OF GASEOUS GRAB SAMPLES FROM COMBUSTION SOURCES FOR NITROUS OXIDE MEASUREMENT

Science.gov (United States)

The document is a recommended operating procedure, prepare or use in research activities conducted by EPA's Air and Energy Engineering Research Laboratory (AEERL). The procedure applies to the collection of gaseous grab samples from fossil fuel combustion sources for subsequent a...

Constraints on equivalent elastic source models from near-source data

International Nuclear Information System (INIS)

Stump, B.

1993-01-01

A phenomenological based seismic source model is important in quantifying the important physical processes that affect the observed seismic radiation in the linear-elastic regime. Representations such as these were used to assess yield effects on seismic waves under a Threshold Test Ban Treaty and to help transport seismic coupling experience at one test site to another. These same characterizations in a non-proliferation environment find applications in understanding the generation of the different types of body and surface waves from nuclear explosions, single chemical explosions, arrays of chemical explosions used in mining, rock bursts and earthquakes. Seismologists typically begin with an equivalent elastic representation of the source which when convolved with the propagation path effects produces a seismogram. The Representation Theorem replaces the true source with an equivalent set of body forces, boundary conditions or initial conditions. An extension of this representation shows the equivalence of the body forces, boundary conditions and initial conditions and replaces the source with a set of force moments, the first degree moment tensor for a point source representation. The difficulty with this formulation, which can completely describe the observed waveforms when the propagation path effects are known, is in the physical interpretation of the actual physical processes acting in the source volume. Observational data from within the source region, where processes are often nonlinear, linked to numerical models of the important physical processes in this region are critical to a unique physical understanding of the equivalent elastic source function

Efficiency and Effectiveness in the Collection and Analysis of S&T Open Source Information

International Nuclear Information System (INIS)

Pericou-Cayere, M.; Lemaire, P.; Pace, J.-M.; Baude, S.; Samson, N.

2015-01-01

While looking for information in scientific database, we are overwhelmed by the amount of information that we encounter. In this big data collection, getting information with added-value could be strategic for nuclear verification. In our study, we have worked about ''best practices'' in collecting, processing and analyzing open source scientific and technical information. First, we were insistent on working with information authenticated by referees such as scientific publications (structured information). Analysis of this structured data is made with bibliometric tools. Several steps are carried out: collecting data related to the paradigm, creating a database to store data generated by bibliographic research, analyzing data with selected tools. With analysis of bibliographic data only, we are able to get: · a panoramic view of countries that publish in the paradigm, · co-publication networks, · organizations that contribute to scientific publications, · countries with which a country collaborates, · areas of interest of a country, . . . So we are able to identify a target. On a second phase, we can focus on a target (countries for example). Working with non-structured data (i.e., press release, social networks, full text analysis of publications) is in progress and needs other tools to be added to the process, as we will discuss in this paper. In information analysis, methodology and expert analysis are important. Software analysis is just a tool to achieve our goal. This presentation deals with concrete measures that improve the efficiency and effectiveness in the use of open source S&T information and in the management of that information over time. Examples are shown. (author)

The correlational research on the physical mechanical indexes of typical soil collecting from the Xu Wei Lianyungang port

Science.gov (United States)

Liu, Wenbin; Wang, Yuanzhan; Liu, Aimin

2017-11-01

The tests on the physical mechanical indexes of the reclaimed soft clay are necessary to be done before the foundation strengthening treatment. This paper focus on the study of correlational relationship between the physical mechanical indexes, such as the natural water content, the void ratio, the liquid limit etc., by fitting the data of model test on samples collecting from the Xu Wei Lianyungang port. The linear relationship fitting curve of the physical mechanical indexes is proposed, and these results support the high efficient operation in engineering practice.

Sheath physics and materials science results from recent plasma source ion implantation experiments

International Nuclear Information System (INIS)

Conrad, J.R.; Radtke, J.L.; Dodd, R.A.; Worzala, F.J.

1987-01-01

Plasma Source Ion Implantation (PSII) is a surface modification technique which has been optimized for ion-beam processing of materials. PSII departs radically from conventional implantation by circumventing the line of sight restriction inherent in conventional ion implantation. The authors used PSII to implant cutting tools and dies and have demonstrated substantial improvements in lifetime. Recent results on plasma physics scaling laws, microstructural, mechanical, and tribological properties of PSII-implanted materials are presented

Transition to a Source with Modified Physical Parameters by Energy Supply or Using an External Force

Science.gov (United States)

Kucherov, A. N.

2017-11-01

A study has been made of the possibility for the physical parameters of a source/sink, i.e., for the enthalpy, temperature, total pressure, maximum velocity, and minimum dimension, at a constant radial Mach number to be changed by energy or force action on the gas in a bounded zone. It has been shown that the parameters can be controlled at a subsonic, supersonic, and transonic (sonic in the limit) radial Mach number. In the updated source/sink, all versions of a vortex-source combination can be implemented: into a vacuum, out of a vacuum, into a submerged space, and out of a submerged space, partially or fully.

Physical, chemical, and biological data collected in Mobile Bay, Alabama in May 1989-December 1999 (NODC Accession 0116496)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains physical, chemical, and biological data collected during ten years of near-monthly shipboard surveys carried out in Mobile Bay between May 1989...

Physics-based approach to chemical source localization using mobile robotic swarms

Science.gov (United States)

Zarzhitsky, Dimitri

2008-07-01

Recently, distributed computation has assumed a dominant role in the fields of artificial intelligence and robotics. To improve system performance, engineers are combining multiple cooperating robots into cohesive collectives called swarms. This thesis illustrates the application of basic principles of physicomimetics, or physics-based design, to swarm robotic systems. Such principles include decentralized control, short-range sensing and low power consumption. We show how the application of these principles to robotic swarms results in highly scalable, robust, and adaptive multi-robot systems. The emergence of these valuable properties can be predicted with the help of well-developed theoretical methods. In this research effort, we have designed and constructed a distributed physicomimetics system for locating sources of airborne chemical plumes. This task, called chemical plume tracing (CPT), is receiving a great deal of attention due to persistent homeland security threats. For this thesis, we have created a novel CPT algorithm called fluxotaxis that is based on theoretical principles of fluid dynamics. Analytically, we show that fluxotaxis combines the essence, as well as the strengths, of the two most popular biologically-inspired CPT methods-- chemotaxis and anemotaxis. The chemotaxis strategy consists of navigating in the direction of the chemical density gradient within the plume, while the anemotaxis approach is based on an upwind traversal of the chemical cloud. Rigorous and extensive experimental evaluations have been performed in simulated chemical plume environments. Using a suite of performance metrics that capture the salient aspects of swarm-specific behavior, we have been able to evaluate and compare the three CPT algorithms. We demonstrate the improved performance of our fluxotaxis approach over both chemotaxis and anemotaxis in these realistic simulation environments, which include obstacles. To test our understanding of CPT on actual hardware

Data Release Report for Source Physics Experiments 2 and 3 (SPE-2 and SPE-3) Nevada National Security Site

Energy Technology Data Exchange (ETDEWEB)

Townsend, Margaret [National Security Technologies, LLC. (NSTec), Las Vegas, NV (United States); Obi, Curtis [National Security Technologies, LLC. (NSTec), Las Vegas, NV (United States)

2015-04-30

The second Source Physics Experiment shot (SPE-2) was conducted in Nevada on October 25, 2011, at 1900:00.011623 Greenwich Mean Time (GMT). The explosive source was 997 kilograms (kg) trinitrotoluene (TNT) equivalent of sensitized heavy ammonium fuel oil (SHANFO) detonated at a depth of 45.7 meters (m). The third Source Physics Experiment shot (SPE-3) was conducted in Nevada on July 24, 2012, at 1800:00.44835 GMT. The explosive source was 905 kg TNT equivalent of SHANFO detonated at a depth of 45.8 m. Both shots were recorded by an extensive set of instrumentation that includes sensors both at near-field (less than 100 m) and far-field (100 m or greater) distances. The near-field instruments consisted of three-component accelerometers deployed in boreholes at 15, 46, and 55 m depths around the shot and a set of single-component vertical accelerometers on the surface. The far-field network was composed of a variety of seismic and acoustic sensors, including short-period geophones, broadband seismometers, three-component accelerometers, and rotational seismometers at distances of 100 m to 25 kilometers. This report coincides with the release of these data for analysts and organizations that are not participants in this program. This report describes the second and third Source Physics Experiment shots and the various types of near-field and farfield data that are available.This revised document includes reports on baseline shift corrections for the SPE-2 and SPE-3 shots that were missing from the original January 2015 version.

Collecting data in the home laboratory: evolution of X-ray sources, detectors and working practices

Energy Technology Data Exchange (ETDEWEB)

Skarzynski, Tadeusz, E-mail: tadeusz.skarzynski@agilent.com [Agilent Technologies, 10 Mead Road, Yarnton, Oxfordshire (United Kingdom)

2013-07-01

Recent developments in X-ray crystallographic hardware related to structural biology research are presented and discussed. While the majority of macromolecular X-ray data are currently collected using highly efficient beamlines at an ever-increasing number of synchrotrons, there is still a need for high-performance reliable systems for in-house experiments. In addition to crystal screening and optimization of data-collection parameters before a synchrotron trip, the home system allows the collection of data as soon as the crystals are produced to obtain the solution of novel structures, especially by the molecular-replacement method, and is invaluable in achieving the quick turnover that is often required for ligand-binding studies in the pharmaceutical industry. There has been a continuous evolution of X-ray sources, detectors and software developed for in-house use in recent years and a diverse range of tools for structural biology laboratories are available. An overview of the main directions of these developments and examples of specific solutions available to the macromolecular crystallography community are presented in this paper, showing that data collection ‘at home’ is still an attractive proposition complementing the use of synchrotron beamlines.

Physics of microswimmers—single particle motion and collective behavior: a review

International Nuclear Information System (INIS)

Elgeti, J; Winkler, R G; Gompper, G

2015-01-01

Locomotion and transport of microorganisms in fluids is an essential aspect of life. Search for food, orientation toward light, spreading of off-spring, and the formation of colonies are only possible due to locomotion. Swimming at the microscale occurs at low Reynolds numbers, where fluid friction and viscosity dominates over inertia. Here, evolution achieved propulsion mechanisms, which overcome and even exploit drag. Prominent propulsion mechanisms are rotating helical flagella, exploited by many bacteria, and snake-like or whip-like motion of eukaryotic flagella, utilized by sperm and algae. For artificial microswimmers, alternative concepts to convert chemical energy or heat into directed motion can be employed, which are potentially more efficient. The dynamics of microswimmers comprises many facets, which are all required to achieve locomotion. In this article, we review the physics of locomotion of biological and synthetic microswimmers, and the collective behavior of their assemblies. Starting from individual microswimmers, we describe the various propulsion mechanism of biological and synthetic systems and address the hydrodynamic aspects of swimming. This comprises synchronization and the concerted beating of flagella and cilia. In addition, the swimming behavior next to surfaces is examined. Finally, collective and cooperate phenomena of various types of isotropic and anisotropic swimmers with and without hydrodynamic interactions are discussed. (report on progress)

Nuclear physics experiments with low cost instrumentation

Science.gov (United States)

Oliveira Bastos, Rodrigo; Adelar Boff, Cleber; Melquiades, Fábio Luiz

2016-11-01

One of the difficulties in modern physics teaching is the limited availability of experimental activities. This is particularly true for teaching nuclear physics in high school or college. The activities suggested in the literature generally symbolise real phenomenon, using simulations. It happens because the experimental practices mostly include some kind of expensive radiation detector and an ionising radiation source that requires special care for handling and storage, being subject to a highly bureaucratic regulation in some countries. This study overcomes these difficulties and proposes three nuclear physics experiments using a low-cost ion chamber which construction is explained: the measurement of 222Rn progeny collected from the indoor air; the measurement of the range of alpha particles emitted by the 232Th progeny, present in lantern mantles and in thoriated welding rods, and by the air filter containing 222Rn progeny; and the measurement of 220Rn half-life collected from the emanation of the lantern mantles. This paper presents the experimental procedures and the expected results, indicating that the experiments may provide support for nuclear physics classes. These practices may outreach wide access to either college or high-school didactic laboratories, and the apparatus has the potential for the development of new teaching activities for nuclear physics.

Managing physical therapy resources: an analogy to the freedom of the commons and the need for collective action.

Science.gov (United States)

Brennan, Gerard P

2012-06-01

Tragedy results when we each pursue our own best interest in a society that believes in the freedom of a commons, such as clean air, fresh water, or natural fishing grounds. The purpose of this editorial is to consider how resources related to healthcare, and specifically to the delivery of physical therapy, can suffer the tragedy of the commons, and to consider an alternative strategy by which we can manage physical therapy resources effectively through collective action.

Steps towards single source--collecting data about quality of life within clinical information systems.

Science.gov (United States)

Fritz, Fleur; Ständer, Sonja; Breil, Bernhard; Dugas, Martin

2010-01-01

Information about the quality of life from patients being treated in routine medical care is important for the attending physician. This data is also needed in research for example to evaluate the therapy and the course of the disease respectively. Especially skin diseases often negatively affect the quality of life. Therefore we aimed to design a concept to collect such data during treatment and use it for both medical care and research in the setting of dermatology. We performed a workflow analysis and implemented a designated form using the tools of the local clinical information system. Quality of life data is now collected within the clinical information system during treatment and is used for discharge letters, progress overviews as well as research about the treatment and course of disease. This concept which contributes to the single source approach was feasible within dermatology and is ready to be expanded into other domains.

Using open source accelerometer analysis to assess physical activity and sedentary behaviour in overweight and obese adults.

Science.gov (United States)

Innerd, Paul; Harrison, Rory; Coulson, Morc

2018-04-23

Physical activity and sedentary behaviour are difficult to assess in overweight and obese adults. However, the use of open-source, raw accelerometer data analysis could overcome this. This study compared raw accelerometer and questionnaire-assessed moderate-to-vigorous physical activity (MVPA), walking and sedentary behaviour in normal, overweight and obese adults, and determined the effect of using different methods to categorise overweight and obesity, namely body mass index (BMI), bioelectrical impedance analysis (BIA) and waist-to-hip ratio (WHR). One hundred twenty adults, aged 24-60 years, wore a raw, tri-axial accelerometer (Actigraph GT3X+), for 3 days and completed a physical activity questionnaire (IPAQ-S). We used open-source accelerometer analyses to estimate MVPA, walking and sedentary behaviour from a single raw accelerometer signal. Accelerometer and questionnaire-assessed measures were compared in normal, overweight and obese adults categorised using BMI, BIA and WHR. Relationships between accelerometer and questionnaire-assessed MVPA (Rs = 0.30 to 0.48) and walking (Rs = 0.43 to 0.58) were stronger in normal and overweight groups whilst sedentary behaviour were modest (Rs = 0.22 to 0.38) in normal, overweight and obese groups. The use of WHR resulted in stronger agreement between the questionnaire and accelerometer than BMI and BIA. Finally, accelerometer data showed stronger associations with BMI, BIA and WHR (Rs = 0.40 to 0.77) than questionnaire data (Rs = 0.24 to 0.37). Open-source, raw accelerometer data analysis can be used to estimate MVPA, walking and sedentary behaviour from a single acceleration signal in normal, overweight and obese adults. Our data supports the use of WHR to categorise overweight and obese adults. This evidence helps researchers obtain more accurate measures of physical activity and sedentary behaviour in overweight and obese populations.

Physical and mechanical properties of LDPE incorporated with different starch sources

Science.gov (United States)

Kormin, Shaharuddin; Kormin, Faridah; Dalour Hossen Beg, Mohammad; Bijarimi Mat Piah, Mohd

2017-08-01

In this study it was investigated the incorporation of different starches, such as sago starch, corn starch, potato starch, tapioca starch and wheat starch, in low-density polyethylene matrix (LDPE) to enhanced mechanical properties and to obtain partially biodegradable product with the aim to reduce the plastics wastes in the environment. For comparison, virgin LDPE, LDPE with different sources of starch blends were prepared and characterized under the same conditions. The starches were mixed to the LDPE using a twin screw extruder to guarantee the homogeneity of the formulations. The compound were shaping processed by injection moulding. The characterization of those compounds was done by physical (density, MFI), mechanical (Universal tensile machine). The addition of starch to LDPE reduced the MFI values, the tensile strength, elongation at break and impact strength, whereas the elastic modulus, flexural modulus and flexural strength increased. LDPE/SS show the good mechanical behavior compared to other formulation. The physical and mechanical properties were evident when 5 and 30 wt% were added. Water uptake increased with increased starch content and immersion time. The time taken for the composites to equilibrate was about one month even when they were immersed completely in water.

On the nature of data collection for soft-tissue image-to-physical organ registration: a noise characterization study

Science.gov (United States)

Collins, Jarrod A.; Heiselman, Jon S.; Weis, Jared A.; Clements, Logan W.; Simpson, Amber L.; Jarnagin, William R.; Miga, Michael I.

2017-03-01

In image-guided liver surgery (IGLS), sparse representations of the anterior organ surface may be collected intraoperatively to drive image-to-physical space registration. Soft tissue deformation represents a significant source of error for IGLS techniques. This work investigates the impact of surface data quality on current surface based IGLS registration methods. In this work, we characterize the robustness of our IGLS registration methods to noise in organ surface digitization. We study this within a novel human-to-phantom data framework that allows a rapid evaluation of clinically realistic data and noise patterns on a fully characterized hepatic deformation phantom. Additionally, we implement a surface data resampling strategy that is designed to decrease the impact of differences in surface acquisition. For this analysis, n=5 cases of clinical intraoperative data consisting of organ surface and salient feature digitizations from open liver resection were collected and analyzed within our human-to-phantom validation framework. As expected, results indicate that increasing levels of noise in surface acquisition cause registration fidelity to deteriorate. With respect to rigid registration using the raw and resampled data at clinically realistic levels of noise (i.e. a magnitude of 1.5 mm), resampling improved TRE by 21%. In terms of nonrigid registration, registrations using resampled data outperformed the raw data result by 14% at clinically realistic levels and were less susceptible to noise across the range of noise investigated. These results demonstrate the types of analyses our novel human-to-phantom validation framework can provide and indicate the considerable benefits of resampling strategies.

The Collected Works of Eugene Paul Wigner Historical, Philosophical, and Socio-Political Papers

CERN Document Server

Wigner, Eugene Paul

2001-01-01

Not only was EP Wigner one of the most active creators of 20th century physics, he was also always interested in expressing his opinion in philosophical, political or sociological matters This volume of his collected works covers a wide selection of his essays about science and society, about himself and his colleagues Annotated by J Mehra, this volume will become an important source of reference for historians of science, and it will be pleasant reading for every physicist interested in forming ideas in modern physics

Role of differential physical properties in the collective mechanics and dynamics of tissues

Science.gov (United States)

Das, Moumita

Living cells and tissues are highly mechanically sensitive and active. Mechanical stimuli influence the shape, motility, and functions of cells, modulate the behavior of tissues, and play a key role in several diseases. In this talk I will discuss how collective biophysical properties of tissues emerge from the interplay between differential mechanical properties and statistical physics of underlying components, focusing on two complementary tissue types whose properties are primarily determined by (1) the extracellular matrix (ECM), and (2) individual and collective cell properties. I will start with the structure-mechanics-function relationships in articular cartilage (AC), a soft tissue that has very few cells, and its mechanical response is primarily due to its ECM. AC is a remarkable tissue: it can support loads exceeding ten times our body weight and bear 60+ years of daily mechanical loading despite having minimal regenerative capacity. I will discuss the biophysical principles underlying this exceptional mechanical response using the framework of rigidity percolation theory, and compare our predictions with experiments done by our collaborators. Next I will discuss ongoing theoretical work on how the differences in cell mechanics, motility, adhesion, and proliferation in a co-culture of breast cancer cells and healthy breast epithelial cells may modulate experimentally observed differential migration and segregation. Our results may provide insights into the mechanobiology of tissues with cell populations with different physical properties present together such as during the formation of embryos or the initiation of tumors. This work was partially supported by a Cottrell College Science Award.

A Parameter Identification Method for Helicopter Noise Source Identification and Physics-Based Semi-Empirical Modeling

Science.gov (United States)

Greenwood, Eric, II; Schmitz, Fredric H.

2010-01-01

A new physics-based parameter identification method for rotor harmonic noise sources is developed using an acoustic inverse simulation technique. This new method allows for the identification of individual rotor harmonic noise sources and allows them to be characterized in terms of their individual non-dimensional governing parameters. This new method is applied to both wind tunnel measurements and ground noise measurements of two-bladed rotors. The method is shown to match the parametric trends of main rotor Blade-Vortex Interaction (BVI) noise, allowing accurate estimates of BVI noise to be made for operating conditions based on a small number of measurements taken at different operating conditions.

Sources of radioactive waste from light-water reactors and their physical and chemical properties

International Nuclear Information System (INIS)

Bell, M.J.; Collins, J.T.

1979-01-01

The general physical and chemical properties of waste streams in light-water reactors (LWRs) are described. The principal mechanisms for release and the release pathways to the environment are discussed. The calculation of liquid and gaseous source terms using one of the available models is presented. These calculated releases are compared with observed releases from operating LWRs. The computerized mathematical model used is the GALE Code which is the Nuclear Regulatory Commission (NRC) staff's model for calculating source terms for effluents from LWRs (USNRC76a, USNRC76b). Programs currently being conducted at operating reactors by the NRC, Electric Power Research Institute, and various utilities to better define the characteristics of waste streams and the performance of radwaste process equipment are described

Chemical, physical, and meteorological data collected on multiple cruises from 7/17/1970 - 11/18/1984 (NODC Accession 0000073)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Nutrients, physical, and meteorological data were collected from multiple platforms using meteorological sensors from 17 July 1970 to 14, November 1984. Data were...

Effect of basic physical parameters to control plasma meniscus and beam halo formation in negative ion sources

Energy Technology Data Exchange (ETDEWEB)

Miyamoto, K. [Naruto University of Education, 748 Nakashima, Takashima, Naruto-cho, Naruto-shi, Tokushima 772-8502 (Japan); Okuda, S.; Nishioka, S.; Hatayama, A. [Faculty of Science and Technology, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-8522 (Japan)

2013-09-14

Our previous study shows that the curvature of the plasma meniscus causes the beam halo in the negative ion sources: the negative ions extracted from the periphery of the meniscus are over-focused in the extractor due to the electrostatic lens effect, and consequently become the beam halo. In this article, the detail physics of the plasma meniscus and beam halo formation is investigated with two-dimensional particle-in-cell simulation. It is shown that the basic physical parameters such as the H{sup −} extraction voltage and the effective electron confinement time significantly affect the formation of the plasma meniscus and the resultant beam halo since the penetration of electric field for negative ion extraction depends on these physical parameters. Especially, the electron confinement time depends on the characteristic time of electron escape along the magnetic field as well as the characteristic time of electron diffusion across the magnetic field. The plasma meniscus penetrates deeply into the source plasma region when the effective electron confinement time is short. In this case, the curvature of the plasma meniscus becomes large, and consequently the fraction of the beam halo increases.

Effect of basic physical parameters to control plasma meniscus and beam halo formation in negative ion sources

International Nuclear Information System (INIS)

Miyamoto, K.; Okuda, S.; Nishioka, S.; Hatayama, A.

2013-01-01

Our previous study shows that the curvature of the plasma meniscus causes the beam halo in the negative ion sources: the negative ions extracted from the periphery of the meniscus are over-focused in the extractor due to the electrostatic lens effect, and consequently become the beam halo. In this article, the detail physics of the plasma meniscus and beam halo formation is investigated with two-dimensional particle-in-cell simulation. It is shown that the basic physical parameters such as the H − extraction voltage and the effective electron confinement time significantly affect the formation of the plasma meniscus and the resultant beam halo since the penetration of electric field for negative ion extraction depends on these physical parameters. Especially, the electron confinement time depends on the characteristic time of electron escape along the magnetic field as well as the characteristic time of electron diffusion across the magnetic field. The plasma meniscus penetrates deeply into the source plasma region when the effective electron confinement time is short. In this case, the curvature of the plasma meniscus becomes large, and consequently the fraction of the beam halo increases

Time-Dependent Moment Tensors of the First Four Source Physics Experiments (SPE) Explosions

Science.gov (United States)

Yang, X.

2015-12-01

We use mainly vertical-component geophone data within 2 km from the epicenter to invert for time-dependent moment tensors of the first four SPE explosions: SPE-1, SPE-2, SPE-3 and SPE-4Prime. We employ a one-dimensional (1D) velocity model developed from P- and Rg-wave travel times for Green's function calculations. The attenuation structure of the model is developed from P- and Rg-wave amplitudes. We select data for the inversion based on the criterion that they show consistent travel times and amplitude behavior as those predicted by the 1D model. Due to limited azimuthal coverage of the sources and the mostly vertical-component-only nature of the dataset, only long-period, diagonal components of the moment tensors are well constrained. Nevertheless, the moment tensors, particularly their isotropic components, provide reasonable estimates of the long-period source amplitudes as well as estimates of corner frequencies, albeit with larger uncertainties. The estimated corner frequencies, however, are consistent with estimates from ratios of seismogram spectra from different explosions. These long-period source amplitudes and corner frequencies cannot be fit by classical P-wave explosion source models. The results motivate the development of new P-wave source models suitable for these chemical explosions. To that end, we fit inverted moment-tensor spectra by modifying the classical explosion model using regressions of estimated source parameters. Although the number of data points used in the regression is small, the approach suggests a way for the new-model development when more data are collected.

Inverse Compton gamma-ray source for nuclear physics and related applications at the Duke FEL

International Nuclear Information System (INIS)

O'Shea, P.G.; Litvinenko, V.N.; Madey, J.M.J.

1995-01-01

In recent years the development of intense, short-wavelength FEL light sources has opened opportunities for the development new applications of high-energy Compton-backscattered photons. These applications range from medical imaging with X-ray photons to high-energy physics with γγ colliders. In this paper we discuss the possibilities for nuclear physics studies using polarized Compton backscattered γ-rays from the Duke storage-ring-driven UV-FEL. There are currently a number of projects that produce polarized γ-rays for nuclear physics studies. All of these facilities operate by scattering conventional laser-light against electrons circulating in a storage ring. In our scheme, intra-cavity scattering of the UV-FEL light will produce a γ-flux enhancement of approximately 10 3 over existing sources. The Duke ring can operate at energies up to 1.2 GeV and can produce FEL photons up to 12.5 eV. We plan to generate γ-rays up to 200 MeV in energy with an average flux in excess of 10 7 /s/MeV, using a modest scattering beam of 10-mA average stored current. The γ-ray energy may be tuned by varying the FEL wavelength or by adjusting the stored electron beam energy. Because of the intense flux, we can eliminate the need for photon energy tagging by collimating of the γ-ray beam. We will discuss the characteristics of the device and its research opportunities

75 FR 32508 - Agency Information Collection Activities: Proposed Collection; Comment Request

Science.gov (United States)

2010-06-08

... teacher effectiveness. The methods of data collection will include both primary and secondary data collections. Primary data collection will include surveys and telephone interviews; secondary data sources... for research, evaluation and data collection (e.g., surveys and interviews) about the Noyce Program...

Deploying and implementing Inclusive Physical Education

Directory of Open Access Journals (Sweden)

Eliana Lúcia Ferreira

2014-04-01

Full Text Available Physical Education, as a curricular component of basic education, is not indifferent to the movement of Inclusive physical education. Differentiated bodies are conquering new social spaces. Our aim through this investigation is to identify the main historical practices regarding Brazilian Policy of Inclusive Education and to point out proposals to implement inclusive Physical education. Our methodology consists of a descriptive study based on two main axes. The first axis is related to a historical discussion whose source was national documents of reference about Inclusive Physical Education. The second axis is related to the experience of 2000 teachers; we have the occasion to analyze their practices on the subject of Inclusive physical education. As a result, this investigation also develops a proposal to inclusive physical education; this proposal is established in another dimension and understanding of work and movement. Concerning the final considerations we suggest a disruption with already crystallized bodily practices and we suggest actions respecting individual differences. Moreover, we point out the fact that Inclusive Physical Education has advocated another meaning for the body, in favor of a more collective physical education and searching for activities in which individuality prevails.

Physics and technology of spallation neutron sources

International Nuclear Information System (INIS)

Bauer, G.S.

1998-08-01

Next to fission and fusion, spallation is an efficient process for releasing neutrons from nuclei. Unlike the other two reactions, it is an endothermal process and can, therefore, not be used per se in energy generation. In order to sustain a spallation reaction, an energetic beam of particles, most commonly protons, must be supplied onto a heavy target. Spallation can, however, play an important role as a source of neutrons whose flux can be easily controlled via the driving beam. Up to a few GeV of energy, the neutron production is roughly proportional to the beam power. Although sophisticated Monte Carlo codes exist to compute all aspects of a spallation facility, many features can be understood on the basis of simple physics arguments. Technically a spallation facility is very demanding, not only because a reliable and economic accelerator of high power is needed to drive the reaction, but also, and in particular, because high levels of radiation and heat are generated in the target which are difficult to cope with. Radiation effects in a spallation environment are different from those commonly encountered in a reactor and are probably even more temperature dependent than the latter because of the high gas production rate. A commonly favored solution is the use of molten heavy metal targets. While radiation damage is not a problem in this case, except for the container, a number of other issues are discussed. (author)

Analysis on Physical Characteristics of Rural Solid Waste in Dongjiang River Source Area, China

Directory of Open Access Journals (Sweden)

WANG Tao

2014-06-01

Full Text Available Dongjiang river is the source of drinking water of Guangdong Province and Hongkong, and the source area includes three counties in Ganzhou city of Jiangxi Province: Xunwu, Anyuan and Dingnan. Three typical villages were chosen in Dongjiang river source area to investigate the producing quantity and physical characteristics of rural solid waste. Results of investigation showed that the dominant ingredient in rural solid waste in Dongjiang river source area was kitchen waste, taking over 60%, followed by dust, reaching 12%, while other components took less than 10%. The per-capita producing quantity of solid waste of county-level village was 0.2~0.47 kg·d -1 and averaged by 0.36 kg·d -1, while that of town-level village was 0.18~0.35 kg· d -1, averaged by 0.29 kg· d -1 and that of hamlet was 0.07~0.33 kg· d -1, averaged by 0.17 kg· d -1. Water content in rural mixed solid waste of investigated area was significantly linear with percentage of kitchen waste in the mixed waste(R 2 =0.626, P=0.019. The average calorie wasaround 2 329 kJ·kg -1, which indicated that the rural solid waste in Dongjiang river source area was not suitable for incineration disposal directly.

The Radiation Source ELBE and its Research Program in Nuclear Physics

International Nuclear Information System (INIS)

Lehnert, U.; Michel, P.; Schwengner, R.

2005-01-01

The new radiation source 'Strahlungsquelle ELBE' at the Forschungszentrum Rossendorf (FZR) near Dresden, Germany, is a user facility that utilizes a superconducting linear accelerator to produce various secondary beams for experiments in nuclear science, solid state physics, materials research, environmental chemistry and in the life sciences. The high brilliance electron beam of up to 40 MeV and 1 mA (cw) is mainly used to drive free electron lasers producing infrared light in the 5-150 μm wavelength region. Additionally, polarized MeV-Bremsstrahlung and X-rays from electron channeling are available, facilities for neutron and positron production are under construction. The talk outlines the ongoing research activities at ELBE with special attention to the nuclear resonance fluorescence experiments

Diversified Professionalism of Physical Education Teachers in the Asian Context of Hong Kong

Science.gov (United States)

Sum, Raymond Kim Wai; Dimmock, Clive

2014-01-01

This study investigates the socialization and professional experiences of primary school physical education teachers (PSPETs) in the Asian context of Hong Kong. A qualitative research design is adopted. The researcher used semi-structured interviews, supplemented by documentary sources (diaries) for conducting data collection. Eleven PSPETs…

Inertial frames and breakthrough propulsion physics

Science.gov (United States)

Millis, Marc G.

2017-09-01

The term ;Breakthrough Propulsion Physics; comes from the NASA project by that name which examined non-rocket space drives, gravity control, and faster-than-light travel. The focus here is on space drives and the related unsolved physics of inertial frames. A ;space drive; is a generic term encompassing any concept for using as-yet undiscovered physics to move a spacecraft instead of existing rockets, sails, or tethers. The collective state of the art spans mostly steps 1-3 of the scientific method: defining the problem, collecting data, and forming hypotheses. The key issues include (1) conservation of momentum, (2) absence of obvious reaction mass, and (3) the net-external thrusting requirement. Relevant open problems in physics include: (1) the sources and mechanisms of inertial frames, (2) coupling of gravitation to the other fundamental forces, and (3) the nature of the quantum vacuum. Rather than following the assumption that inertial frames are an immutable, intrinsic property of space, this paper revisits Mach's Principle, where it is posited that inertia is relative to the distant surrounding matter. This perspective allows conjectures that a space drive could impart reaction forces to that matter, via some as-yet undiscovered interaction with the inertial frame properties of space. Thought experiments are offered to begin a process to derive new hypotheses. It is unknown if this line of inquiry will be fruitful, but it is hoped that, by revisiting unsolved physics from a propulsion point of view, new insights will be gained.

Sources of pulsed radiation

International Nuclear Information System (INIS)

Sauer, M.C. Jr.

1981-01-01

Characteristics of various sources of pulsed radiation are examined from the viewpoint of their importance to the radiation chemist, and some examples of uses of such sources are mentioned. A summary is given of the application of methods of physical dosimetry to pulsed sources, and the calibration of convenient chemical dosimeters by physical dosimetry is outlined. 7 figures, 1 table

The Co-Construction of Cooperative Learning in Physical Education with Elementary Classroom Teachers

Science.gov (United States)

Dyson, Ben P.; Colby, Rachel; Barratt, Mark

2016-01-01

The purpose of this study was to investigate generalist classroom elementary teachers' implementation of the Cooperative Learning (CL) pedagogical model into their physical education classes. The study used multiple sources of data drawing on qualitative data collection and data analysis research traditions (Miles, Huberman, & Saldana, 2014).…

Collection, Analysis, and Dissemination of Open Source News and Analysis for Safeguards Implementation and Evaluation

International Nuclear Information System (INIS)

Khaled, J.; Reed, J.; Ferguson, M.; Hepworth, C.; Serrat, J.; Priori, M.; Hammond, W.

2015-01-01

Analysis of all safeguards-relevant information is an essential component of IAEA safeguards and the ongoing State evaluation underlying IAEA verification activities. In addition to State declared safeguards information and information generated from safeguards activities both in the field and at headquarters, the IAEA collects and analyzes information from a wide array of open sources relevant to States' nuclear related activities. A number of these open sources include information that could be loosely categorized as ''news'': international, regional, and local media; company and government press releases; public records of parliamentary proceedings; and NGO/academic commentaries and analyzes. It is the task of the State Factors Analysis Section of the Department of Safeguards to collect, analyze and disseminate news of relevance to support ongoing State evaluation. This information supports State evaluation by providing the Department with a global overview of safeguards-relevant nuclear developments. Additionally, this type of information can support in-depth analyses of nuclear fuel cycle related activities, alerting State Evaluation Groups to potential inconsistencies in State declarations, and preparing inspectors for activities in the field. The State Factors Analysis Section uses a variety of tools, including subscription services, news aggregators, a roster of specialized sources, and a custom software application developed by an external partner to manage incoming data streams and assist with making sure that critical information is not overlooked. When analyzing data, it is necessary to determine the credibility of a given source and piece of information. Data must be considered for accuracy, bias, and relevance to the overall assessment. Analysts use a variety of methodological techniques to make these types of judgments, which are included when the information is presented to State Evaluation Groups. Dissemination of news to

Equivalent physical models and formulation of equivalent source layer in high-resolution EEG imaging

International Nuclear Information System (INIS)

Yao Dezhong; He Bin

2003-01-01

In high-resolution EEG imaging, both equivalent dipole layer (EDL) and equivalent charge layer (ECL) assumed to be located just above the cortical surface have been proposed as high-resolution imaging modalities or as intermediate steps to estimate the epicortical potential. Presented here are the equivalent physical models of these two equivalent source layers (ESL) which show that the strength of EDL is proportional to the surface potential of the layer when the outside of the layer is filled with an insulator, and that the strength of ECL is the normal current of the layer when the outside is filled with a perfect conductor. Based on these equivalent physical models, closed solutions of ECL and EDL corresponding to a dipole enclosed by a spherical layer are given. These results provide the theoretical basis of ESL applications in high-resolution EEG mapping

Equivalent physical models and formulation of equivalent source layer in high-resolution EEG imaging

Energy Technology Data Exchange (ETDEWEB)

Yao Dezhong [School of Life Science and Technology, University of Electronic Science and Technology of China, Chengdu City, 610054, Sichuan Province (China); He Bin [The University of Illinois at Chicago, IL (United States)

2003-11-07

In high-resolution EEG imaging, both equivalent dipole layer (EDL) and equivalent charge layer (ECL) assumed to be located just above the cortical surface have been proposed as high-resolution imaging modalities or as intermediate steps to estimate the epicortical potential. Presented here are the equivalent physical models of these two equivalent source layers (ESL) which show that the strength of EDL is proportional to the surface potential of the layer when the outside of the layer is filled with an insulator, and that the strength of ECL is the normal current of the layer when the outside is filled with a perfect conductor. Based on these equivalent physical models, closed solutions of ECL and EDL corresponding to a dipole enclosed by a spherical layer are given. These results provide the theoretical basis of ESL applications in high-resolution EEG mapping.

Effect of physical form and protein source of starter feed on growth and development of dairy calves

Directory of Open Access Journals (Sweden)

E. Yavuz

2015-06-01

Full Text Available Abstract. The objective of this paper was to review the literature on effects of different methods of processing of grain fraction of the starter feeds for young dairy calves, as well as providing another part of starter which is a source of protein, minerals and vitamins in different physical forms. The second aim was to discus the impact of the main protein sources for starter feeds on performance of preweaning and posteweaning dairy calves. The main criteria for assessment of physical form effect and sources of protein in the starter feeds were intake of dry feeds, daily live weight gain and frame size growth of calves, morphological and functional development of forestomachs, digestibility of feeds and health status of young calves. Data show big variations and lack of consistency of experimental results. Good results were achieved when calves were fed whole, ground, dry-rolled, pelleted and steam-flaked grains. It seemed that fineness of grinding and quantities of fine fraction were important for starter intake. Steam-flaking and grinding improved digestibility to the same extent, but whole grain stimulated chewing and improved rumen environment for bacteria growth. Soybean meal was the most palatable and ensured best performance of calves. Evidently, it is possible to replace soybean meal with rape seed, canola type meal, dry distillers grain with solubles (DDGS and other protein sources which contain more fiber and are less digestible. However, it is difficult to appraise how much and at what conditions is it possible to replace completely or a maximum possible portion of soybean meal. Additional studies are needed to clarify interactions between physical form of starters, rumen fermentation environments and age of calves. Information for composition of diets is needed allowing inclusion of maximum amounts of canola meal, DDGS and sunflower meal, which are produced locally and are cheaper than soybean meal, without decreasing live weight

Interaction between the physical forms of starter and forage source on growth performance and blood metabolites of Holstein dairy calves.

Science.gov (United States)

Omidi-Mirzaei, H; Azarfar, A; Kiani, A; Mirzaei, M; Ghaffari, M H

2018-04-11

The objective of this study was to investigate the effects of the physical forms of starter and forage sources on feed intake, growth performance, rumen pH, and blood metabolites of dairy calves. Forty male Holstein calves (41.3 ± 3.5 kg of body weight) were used (n = 10 calves per treatment) in a 2 × 2 factorial arrangement of treatments with the factors being physical forms of starter (coarse mash and texturized) and forage source [alfalfa hay (AH) and wheat straw (WS)]. Individually housed calves were randomly assigned to 1 of the 4 dietary treatments, including (1) coarsely mashed (CM; coarse ground grains combined with a mash supplement) starter feed with AH (CM-AH), (2) coarsely mashed starter feed with WS (CM-WS), (3) texturized feed starter (TF; includes steam-flaked corn, steam-rolled barley combined with a pelleted supplement) with AH (TF-AH), and (4) TF with WS (TF-WS). Both starters had the same ingredients and nutrient compositions but differed in their physical forms. Calves were weaned on d 56 and remained in the study until d 70. All calves had free access to drinking water and the starter feeding at all times. No interaction was detected between the physical forms of starter feeds and forage source concerning starter intake, dry matter intake, metabolizable energy (ME) intake, average daily gain (ADG)/ME intake, ADG, and feed efficiency (FE). The preweaning and overall starter feed intake, dry matter intake, and ME intake were greater for calves fed TF starter diets than those fed CM starter diets. The ADG/ME intake was greater for calves fed TF starter diets than that fed CM starter. The FE was greater for calves fed TF starter diets compared with those fed CM starter during the preweaning, postweaning, and overall periods. The WS improved FE during the postweaning period compared with AH. The physical form of starter, forage source, and their interaction did not affect plasma glucose, triglycerides, and very low-density lipoprotein

Physical hypermedia: augmenting physical material with hypermedia structures

DEFF Research Database (Denmark)

Grønbæk, Kaj; Ørbæk, Peter; Kristensen, Jannie Friis

2003-01-01

This paper introduces the notion of physical hypermedia, addressing the problem of organizing material in mixed digital and physical environments. Based on empirical studies, we propose concepts for collectional actions and meta-data actions, and present prototypes combining principles from...... augmented reality and hypermedia to support organization of mixtures of digital and physical materials. Our prototype of a physical hypermedia system is running on an augmented architect's desk and digital walls utilizing Radio Frequency Identifier (RFID) tags as well as visual tags tracked by cameras....... It allows users to tag physical materials, and have these tracked by readers (antennas) that may become pervasive in our work environments. In the physical hypermedia system, we work with three categories of RFID tags: simple object tags, collectional tags, and tooltags invoking operations such as grouping...

submitter Introduction to Collective Effects in Particle Accelerators

CERN Document Server

Zimmermann, Frank

2016-01-01

The beam intensity and the beam brightness of particle accelerators or colliders operated for high - energy physics were, and are, often severely limited by “collective effects” (e.g.[1]). By contrast, new light sources, such as linac - based free electron lasers, may even rely on collective instabilities to accomplish their mission! The term “collective effects” refers to the interaction of beam particles with each other through a variety of processes, e.g. (1) non-delayed self-fields and image fields present even for constant perfectly conducting and magnetic boundaries (direct and indirect “space - charge effects”), (2) longer - lived electro-magnetic “wake fields” due to a finite chamber resistivity or geometric variation in the beam - pipe cross section, which typically affect later parts of the beam, (3) coherent synchrotron radiation, which on a curved trajectory may even influence earlier parts of the beam, giving rise to “non-causal” wake fields, otherwise not normally encountered...

PhySIC: a veto supertree method with desirable properties.

Science.gov (United States)

Ranwez, Vincent; Berry, Vincent; Criscuolo, Alexis; Fabre, Pierre-Henri; Guillemot, Sylvain; Scornavacca, Celine; Douzery, Emmanuel J P

2007-10-01

This paper focuses on veto supertree methods; i.e., methods that aim at producing a conservative synthesis of the relationships agreed upon by all source trees. We propose desirable properties that a supertree should satisfy in this framework, namely the non-contradiction property (PC) and the induction property (PI). The former requires that the supertree does not contain relationships that contradict one or a combination of the source topologies, whereas the latter requires that all topological information contained in the supertree is present in a source tree or collectively induced by several source trees. We provide simple examples to illustrate their relevance and that allow a comparison with previously advocated properties. We show that these properties can be checked in polynomial time for any given rooted supertree. Moreover, we introduce the PhySIC method (PHYlogenetic Signal with Induction and non-Contradiction). For k input trees spanning a set of n taxa, this method produces a supertree that satisfies the above-mentioned properties in O(kn(3) + n(4)) computing time. The polytomies of the produced supertree are also tagged by labels indicating areas of conflict as well as those with insufficient overlap. As a whole, PhySIC enables the user to quickly summarize consensual information of a set of trees and localize groups of taxa for which the data require consolidation. Lastly, we illustrate the behaviour of PhySIC on primate data sets of various sizes, and propose a supertree covering 95% of all primate extant genera. The PhySIC algorithm is available at http://atgc.lirmm.fr/cgi-bin/PhySIC.

Compact wire array sources: power scaling and implosion physics.

Energy Technology Data Exchange (ETDEWEB)

Serrano, Jason Dimitri; Chuvatin, Alexander S. (Laboratoire du Centre National de la Recherche Scientifique Ecole Polytechnique, Palaiseau, France); Jones, M. C.; Vesey, Roger Alan; Waisman, Eduardo M.; Ivanov, V. V. (University of Nevada - Reno, Reno, NV); Esaulov, Andrey A. (University of Nevada - Reno, Reno, NV); Ampleford, David J.; Cuneo, Michael Edward; Kantsyrev, Victor Leonidovich (University of Nevada - Reno, Reno, NV); Coverdale, Christine Anne; Rudakov, L. I. (Icarus Research, Bethesda, MD); Jones, Brent Manley; Safronova, Alla S. (University of Nevada - Reno, Reno, NV); Vigil, Marcelino Patricio

2008-09-01

A series of ten shots were performed on the Saturn generator in short pulse mode in order to study planar and small-diameter cylindrical tungsten wire arrays at {approx}5 MA current levels and 50-60 ns implosion times as candidates for compact z-pinch radiation sources. A new vacuum hohlraum configuration has been proposed in which multiple z pinches are driven in parallel by a pulsed power generator. Each pinch resides in a separate return current cage, serving also as a primary hohlraum. A collection of such radiation sources surround a compact secondary hohlraum, which may potentially provide an attractive Planckian radiation source or house an inertial confinement fusion fuel capsule. Prior to studying this concept experimentally or numerically, advanced compact wire array loads must be developed and their scaling behavior understood. The 2008 Saturn planar array experiments extend the data set presented in Ref. [1], which studied planar arrays at {approx}3 MA, 100 ns in Saturn long pulse mode. Planar wire array power and yield scaling studies now include current levels directly applicable to multi-pinch experiments that could be performed on the 25 MA Z machine. A maximum total x-ray power of 15 TW (250 kJ in the main pulse, 330 kJ total yield) was observed with a 12-mm-wide planar array at 5.3 MA, 52 ns. The full data set indicates power scaling that is sub-quadratic with load current, while total and main pulse yields are closer to quadratic; these trends are similar to observations of compact cylindrical tungsten arrays on Z. We continue the investigation of energy coupling in these short pulse Saturn experiments using zero-dimensional-type implosion modeling and pinhole imaging, indicating 16 cm/?s implosion velocity in a 12-mm-wide array. The same phenomena of significant trailing mass and evidence for resistive heating are observed at 5 MA as at 3 MA. 17 kJ of Al K-shell radiation was obtained in one Al planar array fielded at 5.5 MA, 57 ns and we

Perspective: The physics, diagnostics, and applications of atmospheric pressure low temperature plasma sources used in plasma medicine

Science.gov (United States)

Laroussi, M.; Lu, X.; Keidar, M.

2017-07-01

Low temperature plasmas have been used in various plasma processing applications for several decades. But it is only in the last thirty years or so that sources generating such plasmas at atmospheric pressure in reliable and stable ways have become more prevalent. First, in the late 1980s, the dielectric barrier discharge was used to generate relatively large volume diffuse plasmas at atmospheric pressure. Then, in the early 2000s, plasma jets that can launch cold plasma plumes in ambient air were developed. Extensive experimental and modeling work was carried out on both methods and much of the physics governing such sources was elucidated. Starting in the mid-1990s, low temperature plasma discharges have been used as sources of chemically reactive species that can be transported to interact with biological media, cells, and tissues and induce impactful biological effects. However, many of the biochemical pathways whereby plasma affects cells remain not well understood. This situation is changing rather quickly because the field, known today as "plasma medicine," has experienced exponential growth in the last few years thanks to a global research community that engaged in fundamental and applied research involving the use of cold plasma for the inactivation of bacteria, dental applications, wound healing, and the destruction of cancer cells/tumors. In this perspective, the authors first review the physics as well as the diagnostics of the principal plasma sources used in plasma medicine. Then, brief descriptions of their biomedical applications are presented. To conclude, the authors' personal assessment of the present status and future outlook of the field is given.

Accelerator Physics Challenges for the NSLS-II Project

Energy Technology Data Exchange (ETDEWEB)

Krinsky,S.

2009-05-04

The NSLS-II is an ultra-bright synchrotron light source based upon a 3-GeV storage ring with a 30-cell (15 super-period) double-bend-achromat lattice with damping wigglers used to lower the emittance below 1 nm. In this paper, we discuss the accelerator physics challenges for the design including: optimization of dynamic aperture; estimation of Touschek lifetime; achievement of required orbit stability; and analysis of ring impedance and collective effects.

Attenuation Model Using the Large-N Array from the Source Physics Experiment

Science.gov (United States)

Atterholt, J.; Chen, T.; Snelson, C. M.; Mellors, R. J.

2017-12-01

The Source Physics Experiment (SPE) consists of a series of chemical explosions at the Nevada National Security Site. SPE seeks to better characterize the influence of subsurface heterogeneities on seismic wave propagation and energy dissipation from explosions. As a part of this experiment, SPE-5, a 5000 kg TNT equivalent chemical explosion, was detonated in 2016. During the SPE-5 experiment, a Large-N array of 996 geophones (half 3-component and half z-component) was deployed. This array covered an area that includes loosely consolidated alluvium (weak rock) and weathered granite (hard rock), and recorded the SPE-5 explosion as well as 53 weight drops. We use these Large-N recordings to develop an attenuation model of the area to better characterize how geologic structures influence source energy partitioning. We found a clear variation in seismic attenuation for different rock types: high attenuation (low Q) for alluvium and low attenuation (high Q) for granite. The attenuation structure correlates well with local geology, and will be incorporated into the large simulation effort of the SPE program to validate predictive models. (LA-UR-17-26382)

The effectiveness of worksite physical activity programs on physical activity, physical fitness, and health

NARCIS (Netherlands)

Proper, K.I.; Koning, M.; Beek, A.J. van der; Hildebrandt, V.H.; Bosscher, R.J.; Mechelen, W. van

2003-01-01

Objective: To critically review the literature with respect to the effectiveness of worksite physical activity programs on physical activity, physical fitness, and health. Data Sources: A search for relevant English-written papers published between 1980 and 2000 was conducted using MEDLINE, EMBASE,

The role of remediation, natural alkalinity sources and physical stream parameters in stream recovery.

Science.gov (United States)

Kruse, Natalie A; DeRose, Lisa; Korenowsky, Rebekah; Bowman, Jennifer R; Lopez, Dina; Johnson, Kelly; Rankin, Edward

2013-10-15

Acid mine drainage (AMD) negatively impacts not only stream chemistry, but also aquatic biology. The ultimate goal of AMD treatment is restoration of the biological community, but that goal is rarely explicit in treatment system design. Hewett Fork in Raccoon Creek Watershed, Ohio, has been impacted by historic coal mining and has been treated with a calcium oxide doser in the headwaters of the watershed since 2004. All of the acidic inputs are isolated to a 1.5 km stretch of stream in the headwaters of the Hewett Fork watershed. The macroinvertebrate and fish communities have begun to recover and it is possible to distinguish three zones downstream of the doser: an impaired zone, a transition zone and a recovered zone. Alkalinity from both the doser and natural sources and physical stream parameters play a role in stream restoration. In Hewett Fork, natural alkaline additions downstream are higher than those from the doser. Both, alkaline additions and stream velocity drive sediment and metal deposition. Metal deposition occurs in several patterns; aluminum tends to deposit in regions of low stream velocity, while iron tends to deposit once sufficient alkalinity is added to the system downstream of mining inputs. The majority of metal deposition occurs upstream of the recovered zone. Both the physical stream parameters and natural alkalinity sources influence biological recovery in treated AMD streams and should be considered in remediation plans. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Unanticipated Challenges Associated With Implementing an Observational Study Protocol in a Large-Scale Physical Activity and Global Positioning System Data Collection

Science.gov (United States)

Walker, David; Ellaway, Anne

2018-01-01

Background Large-scale primary data collections are complex, costly, and time-consuming. Study protocols for trial-based research are now commonplace, with a growing number of similar pieces of work being published on observational research. However, useful additions to the literature base are publications that describe the issues and challenges faced while conducting observational studies. These can provide researchers with insightful knowledge that can inform funding proposals or project development work. Objectives In this study, we identify and reflectively discuss the unforeseen or often unpublished issues associated with organizing and implementing a large-scale objectively measured physical activity and global positioning system (GPS) data collection. Methods The SPACES (Studying Physical Activity in Children’s Environments across Scotland) study was designed to collect objectively measured physical activity and GPS data from 10- to 11-year-old children across Scotland, using a postal delivery method. The 3 main phases of the project (recruitment, delivery of project materials, and data collection and processing) are described within a 2-stage framework: (1) intended design and (2) implementation of the intended design. Results Unanticipated challenges arose, which influenced the data collection process; these encompass four main impact categories: (1) cost, budget, and funding; (2) project timeline; (3) participation and engagement; and (4) data challenges. The main unforeseen issues that impacted our timeline included the informed consent process for children under the age of 18 years; the use of, and coordination with, the postal service to deliver study information and equipment; and the variability associated with when participants began data collection and the time taken to send devices and consent forms back (1-12 months). Unanticipated budgetary issues included the identification of some study materials (AC power adapter) not fitting through

The Unanticipated Challenges Associated With Implementing an Observational Study Protocol in a Large-Scale Physical Activity and Global Positioning System Data Collection.

Science.gov (United States)

McCrorie, Paul; Walker, David; Ellaway, Anne

2018-04-30

Large-scale primary data collections are complex, costly, and time-consuming. Study protocols for trial-based research are now commonplace, with a growing number of similar pieces of work being published on observational research. However, useful additions to the literature base are publications that describe the issues and challenges faced while conducting observational studies. These can provide researchers with insightful knowledge that can inform funding proposals or project development work. In this study, we identify and reflectively discuss the unforeseen or often unpublished issues associated with organizing and implementing a large-scale objectively measured physical activity and global positioning system (GPS) data collection. The SPACES (Studying Physical Activity in Children's Environments across Scotland) study was designed to collect objectively measured physical activity and GPS data from 10- to 11-year-old children across Scotland, using a postal delivery method. The 3 main phases of the project (recruitment, delivery of project materials, and data collection and processing) are described within a 2-stage framework: (1) intended design and (2) implementation of the intended design. Unanticipated challenges arose, which influenced the data collection process; these encompass four main impact categories: (1) cost, budget, and funding; (2) project timeline; (3) participation and engagement; and (4) data challenges. The main unforeseen issues that impacted our timeline included the informed consent process for children under the age of 18 years; the use of, and coordination with, the postal service to deliver study information and equipment; and the variability associated with when participants began data collection and the time taken to send devices and consent forms back (1-12 months). Unanticipated budgetary issues included the identification of some study materials (AC power adapter) not fitting through letterboxes, as well as the employment of

Double radio sources and the new approach to cosmical plasma physics

International Nuclear Information System (INIS)

Alfven, H.

1978-01-01

The methodology of cosmic plasma physics is discussed. It is hazardous to try to describe plasma phenomena by theories which have not been carefully tested experimentally. One present approach is to rely on laboratory measurements and in situ measurements in the magnetosphere and heliosphere, and to approach galactic phenomena by scaling up the wellknown phenomena to galactic dimensions. A summary is given of laboratory investigations of electric double layers, a phenomenon which is known to be very important in laboratory discharges. A summary is also given of the in situ measurements in the magnetosphere by which the importance of electric double layers in the Earth's surrounding is established. The scaling laws between laboratory and magnetospheric double layers are studied. The successful scaling between laboratory and magnetospheric phenomena encourages an extrapolation to heliospheric phenomena. A further extrapolation to galactic phenomena leads to a theory of double radio sources. In analogy with the Sun which, acting as a homopolar inductor, energizes the heliospheric current system, a rotating magnetized galaxy should produce a similar current system. From analogy with laboratory and magnetospheric current systems it is argued that the galactic current might produce double layers where a large energy dissipation takes place. This leads to a theory of the double radio sources which, within the necessary wide limits of uncertainty, is quantitatively reconcilable with observations. (Auth.)

Ionizing radiation sources management in the Commonwealth of Independent States - CIS

International Nuclear Information System (INIS)

Iskra, A.; Bufetova, M.

2006-01-01

Ionizing radiation sources cover a broad band of power: from powerful NPP reactors and research reactors to portable radioisotope ionizing radiation sources applied in medicine, agriculture, industry and in the energy supply systems of remote facilities. At present, scales and use field of radionuclide sources in the CIS have the tendency to increase. In this connection, the issues of ionizing radiation sources management safety at all stages of their life cycle, from production to treatment, have been of a great importance. The materials on ionizing radiation sources inventory and treatment in the CIS (Russia, Armenia, Belarus, Georgia, Kazakhstan, Kyrgyzstan, Tajikistan and Ukraine) are presented in the report. It is shown that in some republics, there is difficulty in ionizing radiation sources accounting and control system; the national regulatory and legal framework bases regulating activity on radioactive sources use, localization and treatment require update. Many problems are connected with the sources beyond state accounting. The problem of ionizing radiation sources use safety is complicated by the growing activity of various terrorist groups. The opportunity to use ionizing radiation sources with terrorism goals requires the application of defined systems of security and physical protection at all stages of their management. For this purpose a collective, with all CIS countries, organization of radioactive sources accounting and control as well as countermeasures on their illegal transportation and use are necessary. In this connection, the information collection regarding situation with providing of ionizing radiation sources safety, conditions of equipment and storage facilities, radioactive materials accounting and control system in the CIS countries is vitally needed

Physical fracture properties (fracture surfaces as information sources; crackgrowth and fracture mechanisms; exemples of cracks)

International Nuclear Information System (INIS)

Meny, Lucienne.

1979-06-01

Fracture surfaces are considered as a useful source of informations: an introduction to fractography is presented; the fracture surface may be observed through X ray microanalysis, and other physical methods such as Auger electron spectroscopy or secundary ion emission. The mechanisms of macroscopic and microscopic crackgrowth and fracture are described, in the case of unstable fracture (cleavage, ductile with shear, intergranular brittleness) and of progressive crack propagation (creep, fatigue). Exemples of cracks are presented in the last chapter [fr

HMSRP Hawaiian Monk Seal Specimen Data (includes physical specimens, collection information, status, storage locations, and laboratory results associated with individual specimens)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set includes physical specimens, paper logs and Freezerworks database of all logged information on specimens collected from Hawaiian monk seals since 1975....

Exploring data sources for road traffic injury in Cameroon: Collection and completeness of police records, newspaper reports, and a hospital trauma registry.

Science.gov (United States)

Juillard, Catherine; Kouo Ngamby, Marquise; Ekeke Monono, Martin; Etoundi Mballa, Georges Alain; Dicker, Rochelle A; Stevens, Kent A; Hyder, Adnan A

2017-12-01

Road traffic injury surveillance systems are a cornerstone of organized efforts at injury control. Although high-income countries rely on established trauma registries and police databases, in low- and middle-income countries, the data source that provides the best collection of road traffic injury events in specific low- and middle-income country contexts without mature surveillance systems is unclear. The objective of this study was to compare the information available on road traffic injuries in 3 data sources used for surveillance in the sub-Saharan African country of Cameroon, providing potential insight on data sources for road traffic injury surveillance in low- and middle-income countries. We assessed the number of events captured and the information available in Yaoundé, Cameroon, from 3 separate sources of data on road traffic injuries: trauma registry, police records, and newspapers. Data were collected from a single-hospital trauma registry, police records, and the 6 most widely circulated newspapers in Yaoundé during a 6-month period in 2009. The number of road traffic injury events, mortality, and other variables included commonly in injury surveillance systems were recorded. We compared these sources using descriptive analysis. Hospital, police, and newspaper sources recorded 1,686, 273, and 480 road traffic injuries, respectively. The trauma registry provided the most complete data for the majority of variables explored; however, the newspaper data source captured 2, mass casualty, train crash events unrecorded in the other sources. Police data provided the most complete information on first responders to the scene, missing in only 7%. Investing in the hospital-based trauma registry may yield the best surveillance for road traffic injuries in some low- and middle-income countries, such as Yaoundé, Cameroon; however, police and newspaper reports may serve as alternative data sources when specific information is needed. Copyright © 2017 Elsevier

All-source Information Management and Integration for Improved Collective Intelligence Production

Science.gov (United States)

2011-06-01

Intelligence (ELINT) • Open Source Intelligence ( OSINT ) • Technical Intelligence (TECHINT) These intelligence disciplines produce... intelligence , measurement and signature intelligence , signals intelligence , and open - source data, in the production of intelligence . All- source intelligence ...All- Source Information Integration and Management) R&D Project 3 All- Source Intelligence

Rockfall hazard assessment integrating probabilistic physically based rockfall source detection (Norddal municipality, Norway).

Science.gov (United States)

Yugsi Molina, F. X.; Oppikofer, T.; Fischer, L.; Hermanns, R. L.; Taurisano, A.

2012-04-01

Traditional techniques to assess rockfall hazard are partially based on probabilistic analysis. Stochastic methods has been used for run-out analysis of rock blocks to estimate the trajectories that a detached block will follow during its fall until it stops due to kinetic energy loss. However, the selection of rockfall source areas is usually defined either by multivariate analysis or by field observations. For either case, a physically based approach is not used for the source area detection. We present an example of rockfall hazard assessment that integrates a probabilistic rockfall run-out analysis with a stochastic assessment of the rockfall source areas using kinematic stability analysis in a GIS environment. The method has been tested for a steep more than 200 m high rock wall, located in the municipality of Norddal (Møre og Romsdal county, Norway), where a large number of people are either exposed to snow avalanches, rockfalls, or debris flows. The area was selected following the recently published hazard mapping plan of Norway. The cliff is formed by medium to coarse-grained quartz-dioritic to granitic gneisses of Proterozoic age. Scree deposits product of recent rockfall activity are found at the bottom of the rock wall. Large blocks can be found several tens of meters away from the cliff in Sylte, the main locality in the Norddal municipality. Structural characterization of the rock wall was done using terrestrial laser scanning (TLS) point clouds in the software Coltop3D (www.terranum.ch), and results were validated with field data. Orientation data sets from the structural characterization were analyzed separately to assess best-fit probability density functions (PDF) for both dip angle and dip direction angle of each discontinuity set. A GIS-based stochastic kinematic analysis was then carried out using the discontinuity set orientations and the friction angle as random variables. An airborne laser scanning digital elevation model (ALS-DEM) with 1 m

Experiments Using Cell Phones in Physics Classroom Education: The Computer-Aided "g" Determination

Science.gov (United States)

Vogt, Patrik; Kuhn, Jochen; Muller, Sebastian

2011-01-01

This paper continues the collection of experiments that describe the use of cell phones as experimental tools in physics classroom education. We describe a computer-aided determination of the free-fall acceleration "g" using the acoustical Doppler effect. The Doppler shift is a function of the speed of the source. Since a free-falling objects…

77 FR 25181 - Agency Information Collection Activities: Proposed Collection; Comment Request

Science.gov (United States)

2012-04-27

... outcomes measures, the HOS is used to collect the Management of Urinary Incontinence in Older Adults, Physical Activity in Older Adults, Fall Risk Management, and Osteoporosis Testing in Older Women HEDIS... collections please reference the document identifier or OMB control number. To be assured consideration...

Collecting and identifying the radioactive waste

International Nuclear Information System (INIS)

Dogaru, C. GH.

2001-01-01

The procedure 'Collecting and identifying the radioactive waste' applied by the Radioactive Waste Management Department, STDR, complies with the requirements of the competent authority concerning the radioactive source management. One of the most important tasks, requiring the application of this procedure, is collecting and identification of 'historical wastes' for which a complete book keeping does not exist from different reasons. The chapter 1 presents the procedure's goal and the chapter 2 defines the applicability field. Chapter 3 enlists the reference documents while the chapter 4 gives the definitions and abbreviations used in the procedure. Chapter 5 defines responsibilities of the operators implied in collecting, identification and characterization of the radioactive wastes, the producers of the radioactive wastes being implied. Chapter 6 gives the preliminary conditions for applying the procedure. Among these, the transport, collecting, processing, storing and characterization costs are implied, as well as the compliance with technical and different other condition. The procedure structure is presented in the chapter 7. In collecting radioactive wastes, two situations are possible: 1- the producer is able to prepare the wastes for transport and to deliver them to STDR; 2 - the wastes are received from the producer by a delegate STDR operator, properly and technically prepared. The producer must demonstrate by documents the origin and possession, analysis bulletins specifying, the radionuclides activity and measurement date, physical state and, in addition, for spent radiation sources, the series/number of the container and producer. In case the producer is not able to display all this information, the wastes are taken into custody by the STDR labs in view of their analysis. A record in writing is completed specifying the transfer of radioactive wastes from the producer to the STDR, a record which is sent to the national authority in charge with the

The relationship between physical activity and physical self-esteem in adolescents: the role of physical fitness indices.

Science.gov (United States)

Haugen, Tommy; Ommundsen, Yngvar; Seiler, Stephen

2013-02-01

The aim of this study was to investigate if physical fitness (strength/power, endurance, flexibility and coordination) mediates the cross-sectional relationship between physical activity and physical self-perception (athletic competence and physical appearance) in a sample of 15-year old adolescents. We wanted to investigate the relative strength of each indirect effect. The present data are taken from two waves of a larger data collection for the project "Youth in Balance", and was collected in the autumn of 2005 (N = 1207) and 2008 (N = 632). A total of 1839 students (889 girls and 950 boys) from 12 schools in Kristiansand took part. A bias-corrected bootstrapping technique was used to examine indirect effects. Results revealed that cardiovascular endurance, lower-body strength/power, and upper-body strength stood out as unique mediators in the relationship between physical activity and athletic competence in both genders. Furthermore, there was an indirect effect of physical activity on physical appearance through physical strength/power and flexibility in males. No indirect effects of physical activity on physical appearance through actual physical fitness indices were detected in females.

Overview of Accelerator Physics Studies and High Level Software for the Diamond Light Source

CERN Document Server

Bartolini, Riccardo; Belgroune, Mahdia; Christou, Chris; Holder, David J; Jones, James; Kempson, Vince; Martin, Ian; Rowland, James H; Singh, Beni; Smith, Susan L; Varley, Jennifer Anne; Wyles, Naomi

2005-01-01

DIAMOND is a 3 GeV synchrotron light source under construction at Rutherford Appleton Laboratory in Oxfordshire (UK). The accelerators complex consists of a 100 MeV LINAC, a full energy booster and a 3GeV storage ring with 22 straight sections available for IDs. Installation of all three accelerators has begun, and LINAC commissioning is due to start in Spring 2005. This paper will give an overview of the accelerator physics activity to produce final layouts and prepare for the commissioning of the accelerator complex. The DIAMOND facility is expected to be operational for users in 2007

A COMPREHENSIVE STUDY OF CLOSE DOUBLE WHITE DWARFS AS GRAVITATIONAL WAVE SOURCES: EVOLUTIONARY CHANNELS, BIRTH RATES, AND PHYSICAL PROPERTIES

International Nuclear Information System (INIS)

Liu Jinzhong; Han Zhanwen; Zhang Fenghui; Zhang Yu

2010-01-01

Close double white dwarfs (CDWDs) are believed to dominate the Galactic gravitational wave (GW) radiation in the frequency range 10 -4 to 0.1 Hz, which will be detected by the Laser Interferometer Space Antenna (LISA) detector. The aim of this detector is to detect GW radiation from astrophysical sources in the universe and to help improve our understanding of the origin of the sources and their physical properties (masses and orbital periods). In this paper, we study the probable candidate sources in the Galaxy for the LISA detector: CDWDs. We use the binary population synthesis approach of CDWDs together with the latest findings of the synthesis models from Han, who proposed three evolutionary channels: (1) stable Roche lobe overflow plus common envelope (RLOF+CE), (2) CE+CE, and (3) exposed core plus CE. As a result, we systematically investigate the detailed physical properties (the distributions of masses, orbital periods, and chirp masses) of the CDWD sources for the LISA detector, examine the importance of the three evolutionary channels for the formation of CDWDs, and carry out Monte Carlo simulations. Our results show that RLOF+CE and CE+CE are the main evolutionary scenarios leading to the formation of CDWDs. For the LISA detectable sources, we also explore and discuss the importance of these three evolutionary channels. Using the calculated birth rate, we compare our results to the LISA sensitivity curve and the foreground noise floor of CDWDs. We find that our estimate for the number of CDWD sources that can be detected by the LISA detector is greater than 10,000. We also find that the detectable CDWDs are produced via the CE+CE channel and we analyze the fraction of the detectable CDWDs that are double helium (He+He), or carbon-oxygen plus helium (CO+He) WD binary systems.

δ15N values of atmospheric N species simultaneously collected using sector-based samplers distant from sources - Isotopic inheritance and fractionation

Science.gov (United States)

Savard, Martine M.; Cole, Amanda; Smirnoff, Anna; Vet, Robert

2017-08-01

The nitrogen isotope ratios (δ15N) of atmospheric N species are commonly suggested as indicators of N emission sources. Therefore, numerous research studies have developed analytical methodologies and characterized primary (gases) and secondary emission products (mostly precipitation and aerosols) from various emitters. These previous studies have generally collected either reduced or oxidized N forms, and sampled them separately prior to determining their δ15N values. Distinctive isotopic signals have been reported for emissions from various sources, and seasonality of the δ15N values has been frequently attributed to shifts in relative contributions from sources with different isotopic signals. However, theoretical concepts suggest that temperature effects on isotopic fractionation may also affect the δ15N values of atmospheric reaction products. Here we use a sector-based multi-stage filter system to simultaneously collect seven reduced and oxidized N species downwind from five different source types in Alberta, Canada. We report δ15N values obtained with a state-of-the-art gold-furnace pre-concentrator online with an isotope ratio mass spectrometer (IRMS) to provide representative results even for oxidized-N forms. We find that equilibrium isotope effects and their temperature dependence play significant roles in determining the δ15N values of the secondary emission products. In the end, seasonal δ15N changes here are mainly caused by temperature effects on fractionation, and the δ15N values of only two N species from one source type can be retained as potential fingerprints of emissions.

THE VIR COLLECTION – A SOURCE OF INITIAL BREEDING MATERIAL FOR THE PERSPECTIVE DIRECTIONS OF BREEDING OF A VEGETABLE MARROW AND PUMPKIN

Directory of Open Access Journals (Sweden)

T. M. Piskunova

2016-01-01

Full Text Available The vegetable marrow and pumpkin are valuable vegetable crops thanks to high food and dietary qualities of fruits. Russia is on the third place in the world on gross yield of these crops, but on productivity takes the 11th place among the European countries. The state register of breeding achievements permitted for utilization in the territory of the Russian Federation for 2016, contains 152 varieties and a hybrids of vegetable marrows and the 138 pumpkins. But there are not enough varieties of a wide area, there are practically no ultra early varieties, there are not enough pumpkin varieties with a bush habitus of plants. The collection of pumpkins and vegetable marrows which is a source of valuable genotypes for the solution of actual tasks of breeding contains 2641 accessions from 99 countries of the world and wins the first place in the number of accessions among world genebanks. The greatest part of a collection (more than 1500 accessions is constituted by advanced varieties, the second part of a collection (more than one thousand accessions – local forms of pumpkins. Not large collection, about 50 accessions, but quite significant for its scientific and breeding values consists of hybrids, self-pollinated lines and donors of valuable traits. As a result of long-term evaluation of breeding accessions the germplasm collection that includes sources of valuable traits has been created. Genetic collection of pumpkin includes accessions with such traits as resistance to a virus mosaic, a naked seeds, bush habitus plants, spaghetti like fruit, parthenocarpy.

Physical and chemical data collected from AXBT and bottle casts from AIRCRAFT in Mediterranean Sea from 30 September 1985 to 31 July 1992 (NODC Accession 9600058)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical and chemical data were collected using AXBT and bottle casts in the Mediterranean Sea from AIRCRAFT. Data were collected from 30 September 1985 to 31 July...

Industrial ion sources broadbeam gridless ion source technology

CERN Document Server

Zhurin, Viacheslav V

2012-01-01

Due to the large number of uses of ion sources in academia and industry, those who utilize these sources need up to date and coherent information to keep themselves abreast of developments and options, and to chose ideal solutions for quality and cost-effectiveness. This book, written by an author with a strong industrial background and excellent standing, is the comprehensive guide users and developers of ion sources have been waiting for. Providing a thorough refresher on the physics involved, this resource systematically covers the source types, components, and the operational parameters.

Mathematics and physics

CERN Document Server

Manin, Yu I

1981-01-01

A bird's eye view of mathematics ; physical quantities, dimensions and constants : the source of numbers in physics ; a drop of milk : observer, observation, observable and unobservable ; space-time as a physical system ; action and symmetry.

New developments with H-sources

International Nuclear Information System (INIS)

Sherman, Joseph D.; Rouleau, G.

2002-01-01

Existing spallation neutron source upgrades, planned spallation neutron sources, and high-energy accelerators for particle physics place demanding requirements on the Hsources. These requirements ask for increased beam currents and duty factor (df) while generally maintaining state-of-the art H' source emittance. A variety of H sources are being developed to address these challenges. These include volume sources with and without the addition of cesium for enhanced He production, increased df cesiated H' Penning and magnetron sources, and cesiated surface converter H- sources. Research on surface films of tantalum metal for enhanced volume H- production is also being studied. Innovative plasma production techniques to address the longer df requirement without sacrificing H- source reliability and liktime will be reviewed. The physical bases, the goals, and perceived challenges will be discussed.

Chemical Explosion Experiments to Improve Nuclear Test Monitoring - Developing a New Paradigm for Nuclear Test Monitoring with the Source Physics Experiments (SPE)

International Nuclear Information System (INIS)

Snelson, Catherine M.; Abbott, Robert E.; Broome, Scott T.; Mellors, Robert J.; Patton, Howard J.; Sussman, Aviva J.; Townsend, Margaret J.; Walter, William R.

2013-01-01

A series of chemical explosions, called the Source Physics Experiments (SPE), is being conducted under the auspices of the U.S. Department of Energy's National Nuclear Security Administration (NNSA) to develop a new more physics-based paradigm for nuclear test monitoring. Currently, monitoring relies on semi-empirical models to discriminate explosions from earthquakes and to estimate key parameters such as yield. While these models have been highly successful monitoring established test sites, there is concern that future tests could occur in media and at scale depths of burial outside of our empirical experience. This is highlighted by North Korean tests, which exhibit poor performance of a reliable discriminant, mb:Ms (Selby et al., 2012), possibly due to source emplacement and differences in seismic responses for nascent and established test sites. The goal of SPE is to replace these semi-empirical relationships with numerical techniques grounded in a physical basis and thus applicable to any geologic setting or depth

The use of physical and virtual infrastructures for the validation of algal cryopreservation methods in international culture collections

Czech Academy of Sciences Publication Activity Database

Day, J. G.; Lorenz, M.; Wilding, T.A.; Friedl, T.; Harding, K.; Pröschold, T.; Brennan, D.; Müller, J.; Santos, L. M. A.; Santos, M. F.; Osório, H.C.; Amaral, R.; Lukešová, Alena; Hrouzek, Pavel; Lukeš, Martin; Elster, Josef; Lukavský, Jaromír; Probert, I.; Ryan, M.J.; Benson, E. E.

2007-01-01

Roč. 28, č. 5 (2007), s. 359-376 ISSN 0143-2044 Grant - others:Evropská unie(XE) QLRT-2000-01645 (Cobra) Institutional research plan: CEZ:AV0Z60660521; CEZ:AV0Z60050516 Source of funding: V - iné verejné zdroje Keywords : cryopreservation * storage * culture collections Subject RIV: EH - Ecology, Behaviour Impact factor: 1.141, year: 2007

Completeness and overlap in open access systems: Search engines, aggregate institutional repositories and physics-related open sources.

Science.gov (United States)

Tsay, Ming-Yueh; Wu, Tai-Luan; Tseng, Ling-Li

2017-01-01

This study examines the completeness and overlap of coverage in physics of six open access scholarly communication systems, including two search engines (Google Scholar and Microsoft Academic), two aggregate institutional repositories (OAIster and OpenDOAR), and two physics-related open sources (arXiv.org and Astrophysics Data System). The 2001-2013 Nobel Laureates in Physics served as the sample. Bibliographic records of their publications were retrieved and downloaded from each system, and a computer program was developed to perform the analytical tasks of sorting, comparison, elimination, aggregation and statistical calculations. Quantitative analyses and cross-referencing were performed to determine the completeness and overlap of the system coverage of the six open access systems. The results may enable scholars to select an appropriate open access system as an efficient scholarly communication channel, and academic institutions may build institutional repositories or independently create citation index systems in the future. Suggestions on indicators and tools for academic assessment are presented based on the comprehensiveness assessment of each system.

The Legacy of Albert Einstein: A Collection of Essays in Celebration of the Year of Physics

International Nuclear Information System (INIS)

Straumann, Norbert

2007-01-01

During the 'World Year of Physics' much has been written on the epoch-making 1905 papers of Albert Einstein and his later great contributions to physics. Why another book on the enormous impact of Einstein's work on 20th-century physics? The short answer is that the present collection of 13 relatively short essays on the legacy of Einstein by outstanding scientists is very pleasant to read and should be of interest to physicists of all branches. Beside looking back, most articles present later and topical developments, whose initiation began with the work of Einstein. During the year 2005, the growing recognition among physicists, historians, and philosophers of Einstein's revolutionary role in quantum theory was often emphasized. It is truly astonishing that most active physicists were largely unaware of this before. Fortunately, the article 'Einstein and the quantum' by V Singh puts the subject in perspective and describes all the main steps, beginning with the truly revolutionary 1905 paper on the light-quantum hypothesis and ending with Einstein's extension of the particle-wave duality to atoms and other particles in 1924-1925. The only point which, in my opinion, is not sufficiently emphasized in the discussion of the 1916-1917 papers on absorption and emission of radiation is the part on the momentum transfer in each elementary process. Einstein's result that there is a directed recoil hν/c-also for spontaneous emission-in complete contrast to classical theory, was particularly important to him. I enjoyed reading the articles on Brownian motion (S Majumdar), Bose-Einstein condensation (N Kumar) and strongly correlated electrons (T Ramakrishnan), which are all written for non-experts. Connected with Einstein's most lasting work-general relativity-there are two articles on cosmology. The one by J Narlikar gives a brief historical account of the development that was initiated by the 1917 paper of Einstein. S Sarkar's essay emphasizes the remarkable recent

GANIL Workshop on Ion Sources; Journees Sources d'Ions

Energy Technology Data Exchange (ETDEWEB)

Leroy, Renan [Grand Accelerateur National d' Ions Lourds (GANIL), 14 - Caen (France)

1999-07-01

The proceedings of the GANIL Workshop on Ion Sources held at GANIL - Caen on 18-19 March 1999 contains 13 papers aiming at improving the old source operation and developing new types of sources for nuclear research and studies of ion physics. A number of reports are devoted to applications like surface treatment, ion implantation or fusion injection. The 1+{yields}n+ transformation, charged particle transport in ECR sources, addition of cesium and xenon in negative ion sources and other basic issues in ion sources are also addressed.

Physical sampling for site and waste characterization

International Nuclear Information System (INIS)

Bonnough, T.L.

1994-01-01

Physical sampling plays a basic role in site and waste characterization program effort. The term ''physical sampling'' used here means collecting tangible, physical samples of soil, water, air, waste streams, or other materials. The industry defines the term ''physical sampling'' broadly to include measurements of physical conditions such as temperature, wind conditions, and pH which are also often taken in a sample collection effort. Most environmental compliance actions are supported by the results of taking, recording, and analyzing physical samples and the measuring of physical conditions taken in association with sample collecting

University of Washington Nuclear Physics Data Collection System

International Nuclear Information System (INIS)

Green, K.C.

1981-01-01

During the past several years, a new data collection system has been developed, replacing a previous system based on an SDS-930 computer. The system is constructed about a PDP 11/60 and an MBD-11 controlled CAMAC crate. The hardware configuration as well as a locally written singles data collection code will be described in some detail. Multiparameter data is taken with an enhanced version of Fermilab Multi. Current capabilities and future plans are discussed

Radiation Sources Working Group Summary Report

International Nuclear Information System (INIS)

Fazio, M.V.

1999-01-01

The Radiation Sources Working Group addressed advanced concepts for the generation of RF energy to power advanced accelerators. The focus of the working group included advanced sources and technologies above 17 GHz. The topics discussed included RF sources above 17 GHz, pulse compression techniques to achieve extreme peak power levels, component technology, technology limitations and physical limits, and other advanced concepts. RF sources included gyroklystrons, magnicons, free-electron masers, two beam accelerators, and gyroharmonic and traveling wave devices. Technology components discussed included advanced cathodes and electron guns, high temperature superconductors for producing magnetic fields, RF breakdown physics and mitigarion, and phenomena that impact source design such as fatigue in resonant structures due to pulsed RF heating. New approaches for RF source diagnostics located internal to the source were discussed for detecting plasma and beam phenomena existing in high energy density electrodynamic systems in order to help elucidate the reasons for performance limitations. copyright 1999 American Institute of Physics

Physics of the Advanced Plasma Source: a review of recent experimental and modeling approaches

International Nuclear Information System (INIS)

Brinkmann, R P; Schröder, B; Lapke, M; Storch, R; Styrnoll, T; Awakowicz, P; Harhausen, J; Foest, R; Hannemann, M; Loffhagen, D; Ohl, A

2016-01-01

The Advanced Plasma Source (APS), a gridless hot cathode glow discharge capable of generating an ion beam with an energy of up to 150 eV and a flux of 10 19 s −1 , is a standard industrial tool for the process of plasma ion-assisted deposition (PIAD). This manuscript details the results of recent experimental and modeling work aimed at a physical understanding of the APS. A three-zone model is proposed which consists of (i) the ionization zone (the source itself) where the plasma is very dense, hot, and has a high ionization rate, (ii) the acceleration zone (of  ∼20 cm extension) where a strong outward-directed electric field accelerates the primary ions to a high kinetic energy, and (iii) a drift zone (the rest of the process chamber) where the emerging plasma beam is further modified by resonant charge exchange collisions that neutralize some of the energetic ions and generate, at the same time, a flux of slow ions. (paper)

Meteorology, physical oceanography, transport of water, biogeochemistry, and other parameters collected at fixed locations in the open ocean from the OceanSITES network

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This collection comprises data covering meteorology, physical oceanography, transport of water, biogeochemistry, and parameters relevant to the carbon cycle, ocean...

Available data sources for monitoring non-communicable diseases and their risk factors in South Africa

Directory of Open Access Journals (Sweden)

M Wandai

2017-04-01

Full Text Available Background. Health information systems for monitoring chronic non-communicable diseases (NCDs in South Africa (SA are relatively less advanced than those for infectious diseases (particularly tuberculosis and HIV and for maternal and child health. NCDs are now the largest cause of premature mortality owing to exposure to risk factors arising from obesity that include physical inactivity and accessible, cheap but unhealthy diets. The National Strategic Plan for the Prevention and Control of Non-Communicable Diseases 2013 - 17 developed by the SA National Department of Health outlines targets and monitoring priorities. Objectives. To assess data sources relevant for monitoring NCDs and their risk factors by identifying the strengths and weaknesses, including usability and availability, of surveys and routine systems focusing at national and certain sub-national levels. Methods. Publicly available survey and routine data sources were assessed for variables collected, their characteristics, frequency of data collection, geographical coverage and data availability. Results. Survey data sources were found to be quite different in the way data variables are collected, their geographical coverage and also availability, while the main weakness of routine data sources was poor quality of data. Conclusions. To provide a sound basis for monitoring progress of NCDs and related risk factors, we recommend harmonising and strengthening available SA data sources in terms of data quality, definitions, categories used, timeliness, disease coverage and biomarker measurement.

Condensed matter physics aspects of electrochemistry

International Nuclear Information System (INIS)

Tosi, M.P.; Kornyshev, A.A.

1991-01-01

This volume collects the proceedings of the Working Party on ''Electrochemistry: Condensed Matter, Atomic and Molecular Physics Aspects'', held for two weeks in the summer of 1990 at the International Centre for Theoretical Physics (ICTP) in Trieste. The goal of the meeting was to discuss those areas of electrochemistry that are accessible to the modern methods of theoretical condensed matter, atomic and molecular physics, in order to stimulate insight and deeper involvement by theoretical physicists into the field. The core of the ICTP Working Party was a set of topically grouped plenary lectures, accompanied by contributed seminars and by the formulation of joint research projects. In the tradition of the ICTP, it was not a meeting of pure theoreticians: about half of the lecturers were professional experimentalists - experts in electrochemistry, physical chemistry, surface science, technical applications. A set of topics was chosen for discussion at the meeting: Liquids, solvation, solutions; The interface (structure, characterization, electric properties, adsorption); Electrodynamics, optics, photo-emission; Charge transfer kinetics (homogeneous and heterogeneous reactions and processes); Superconducting electrodes; Fractal electrodes; Applied research (energy conversion and power sources, electrocatalysis, electroanalysis of turbulent flows). Refs, figs and tabs

Physical and biological data collected with a towed vehicle to support studies in the Southern Oceans, January - February 1998 (NODC Accession 0000947)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical and biological data were collected using fluorometer and CTD casts from the ROGER REVELLE in the Southern Oceans from 12 January 1998 to 03 February 1998....

78 FR 79014 - Agency Information Collection Activities: Proposed Collection; Comment Request

Science.gov (United States)

2013-12-27

... action to submit an information collection request to the Office of Management and Budget (OMB) and... about our intention to request the OMB's approval for renewal of an existing information collection that... Agency (IAEA). Licensees use Form 741 to make inventory and accounting reports for certain source or...

ATLAS File and Dataset Metadata Collection and Use

CERN Document Server

Albrand, S; The ATLAS collaboration; Lambert, F; Gallas, E J

2012-01-01

The ATLAS Metadata Interface (“AMI”) was designed as a generic cataloguing system, and as such it has found many uses in the experiment including software release management, tracking of reconstructed event sizes and control of dataset nomenclature. The primary use of AMI is to provide a catalogue of datasets (file collections) which is searchable using physics criteria. In this paper we discuss the various mechanisms used for filling the AMI dataset and file catalogues. By correlating information from different sources we can derive aggregate information which is important for physics analysis; for example the total number of events contained in dataset, and possible reasons for missing events such as a lost file. Finally we will describe some specialized interfaces which were developed for the Data Preparation and reprocessing coordinators. These interfaces manipulate information from both the dataset domain held in AMI, and the run-indexed information held in the ATLAS COMA application (Conditions and ...

Sources for charged particles; Les sources de particules chargees

Energy Technology Data Exchange (ETDEWEB)

Arianer, J.

1997-09-01

This document is a basic course on charged particle sources for post-graduate students and thematic schools on large facilities and accelerator physics. A simple but precise description of the creation and the emission of charged particles is presented. This course relies on every year upgraded reference documents. Following relevant topics are considered: electronic emission processes, technological and practical considerations on electron guns, positron sources, production of neutral atoms, ionization, plasma and discharge, different types of positive and negative ion sources, polarized particle sources, materials for the construction of ion sources, low energy beam production and transport. (N.T.).

Collective Lyapunov modes

International Nuclear Information System (INIS)

Takeuchi, Kazumasa A; Chaté, Hugues

2013-01-01

We show, using covariant Lyapunov vectors in addition to standard Lyapunov analysis, that there exists a set of collective Lyapunov modes in large chaotic systems exhibiting collective dynamics. Associated with delocalized Lyapunov vectors, they act collectively on the trajectory and hence characterize the instability of its collective dynamics. We further develop, for globally coupled systems, a connection between these collective modes and the Lyapunov modes in the corresponding Perron–Frobenius equation. We thereby address the fundamental question of the effective dimension of collective dynamics and discuss the extensivity of chaos in the presence of collective dynamics. This article is part of a special issue of Journal of Physics A: Mathematical and Theoretical devoted to ‘Lyapunov analysis: from dynamical systems theory to applications’. (paper)

Physical literacy

OpenAIRE

Roučka, Ladislav

2013-01-01

Topic: Physical literacy Goals: The aproximation of physical literacy, collection and evaluation questionnaires of physical literacy knowledge and students anamnesis. Description of applicants progress in the specific movement skills. Method: Unified questionnaires was used for obtaining informations. We make video for movement analysis. Results: The results didn't obtain our expectation that students are able to express precisely the content of physical literacy by specific skills. However, ...

Risk Prevention for Nuclear Materials and Radioactive Sources

International Nuclear Information System (INIS)

Badawy, I.

2008-01-01

The present paper investigates the parameters which may have effects on the safety of nuclear materials and other radioactive sources used in peaceful applications of atomic energy. The emergency response planning in such situations are also indicated. In synergy with nuclear safety measures, an approach is developed in this study for risk prevention. It takes into consideration the collective implementation of measures of nuclear material accounting and control, physical protection and monitoring of such strategic and dangerous materials in an integrated and coordinated real-time mode at a nuclear or radiation facility and in any time

A source book in physics

CERN Document Server

Magie, William Francis

1969-01-01

This is the reprint of a well-known and valuable work that has been out of print and widely sought for a number of years. A volume in the series of Source Books in the History of the Sciences, it consists of selections from the writings of the great physicists from the 16th through the 19th century - such figures as Galileo and Newton, Franklin and Faraday, Rowland, Hertz, and the Curies - making available to the student in English translation their most important contributions, described in their own words, together with biographical and explanatory notes by the editor.

Physics-electrical hybrid model for real time impedance matching and remote plasma characterization in RF plasma sources.

Science.gov (United States)

Sudhir, Dass; Bandyopadhyay, M; Chakraborty, A

2016-02-01

Plasma characterization and impedance matching are an integral part of any radio frequency (RF) based plasma source. In long pulse operation, particularly in high power operation where plasma load may vary due to different reasons (e.g. pressure and power), online tuning of impedance matching circuit and remote plasma density estimation are very useful. In some cases, due to remote interfaces, radio activation and, due to maintenance issues, power probes are not allowed to be incorporated in the ion source design for plasma characterization. Therefore, for characterization and impedance matching, more remote schemes are envisaged. Two such schemes by the same authors are suggested in these regards, which are based on air core transformer model of inductive coupled plasma (ICP) [M. Bandyopadhyay et al., Nucl. Fusion 55, 033017 (2015); D. Sudhir et al., Rev. Sci. Instrum. 85, 013510 (2014)]. However, the influence of the RF field interaction with the plasma to determine its impedance, a physics code HELIC [D. Arnush, Phys. Plasmas 7, 3042 (2000)] is coupled with the transformer model. This model can be useful for both types of RF sources, i.e., ICP and helicon sources.

On the physics of power, energy and economics of renewable electric energy sources - Part II

International Nuclear Information System (INIS)

Skoglund, Annika; Leijon, Mats; Waters, Rafael; Rehn, Alf; Lindahl, Marcus

2010-01-01

Renewable Energy Technologies (RETs) are often recognized as less competitive than traditional electric energy conversion systems. Obstacles with renewable electric energy conversion systems are often referred to the intermittency of the energy sources and the relatively high maintenance cost. However, due to an intensified discourse on climate change and its effects, it has from a societal point of view, become more desirable to adopt and install CO 2 neutral power plants. Even if this has increased the competitiveness of RETs in a political sense, the new goals for RET installations must also be met with economical viability. We propose that the direction of technical development, as well as the chosen technology in new installations, should not primarily be determined by policies, but by the basic physical properties of the energy source and the associated potential for inexpensive energy production. This potential is the basic entity that drives the payback of the investment of a specific RET power plant. With regard to this, we argue that the total electric energy conversion system must be considered if effective power production is to be achieved, with focus on the possible number of full loading hours and the Degree of Utilization. This will increase the cost efficiency and economical competitiveness of RET investments, and could enhance faster diffusion of new innovations and installations without over-optimistic subsidies. This paper elaborates on the overall problem of the economy of renewable electric energy conversion systems by studying the interface between physics, engineering and economy reported for RET power plants in different scientific publications. The core objective is to show the practical use of the Degree of Utilization and how the concept is crucial for the design and economical optimization disregarding subsidies. The results clearly indicate that the future political regulative frameworks should consider the choice of renewable energy

Identifying Stereotypes in the Online Perception of Physical Attractiveness

OpenAIRE

Araújo, Camila Souza; Meira Jr., Wagner; Almeida, Virgilio

2016-01-01

Stereotyping can be viewed as oversimplified ideas about social groups. They can be positive, neutral or negative. The main goal of this paper is to identify stereotypes for female physical attractiveness in images available in the Web. We look at the search engines as possible sources of stereotypes. We conducted experiments on Google and Bing by querying the search engines for beautiful and ugly women. We then collect images and extract information of faces. We propose a methodology and app...

Collective Recycling Responsibility in Closed-Loop Fashion Supply Chains with a Third Party: Financial Sharing or Physical Sharing?

Directory of Open Access Journals (Sweden)

Jiajia Nie

2013-01-01

Full Text Available We develop three closed-loop supply chain models where manufacturers can utilize financial or physical support to push a third party to collect the used fashion product for remanufacturing. We first examine two strategies for the collective recycling responsibility (CRR, namely, the financial sharing (FS and the physical sharing (PS, using the model with no CRR as a benchmark. After that, we conduct a detailed comparison among the three models in terms of the retail price, demand, return rate, and the profits received by the supply chain members. With this study, we find the following. (i The FS or PS support offered by the manufacturer to the third party will result in a lower retail price and a higher demand. (ii The optimal return rate with PS scheme is always higher than that without the CRR, and the one with FS scheme is at least as high as that without the CRR. (iii All the members in the closed-loop supply chain can always benefit from the CRR. In addition, (iv which scheme of the FS, PS, or no CRR is the best for the supply chain members will depend heavily on the transfer price of the used product.

UNO's Afghanistan Collection.

Science.gov (United States)

McKernan, M. D.

This paper explores the background history and sources of the Afghanistan collection at the University Library, University of Nebraska at Omaha (UNO). Credit for the impetus behind the development of the collection is given to Chris Jung, a former UNO geography/geology faculty member; Ronald Roskens, then UNO chancellor; and the Afghanistan…

Embracing Open Software Development in Solar Physics

Science.gov (United States)

Hughitt, V. K.; Ireland, J.; Christe, S.; Mueller, D.

2012-12-01

We discuss two ongoing software projects in solar physics that have adopted best practices of the open source software community. The first, the Helioviewer Project, is a powerful data visualization tool which includes online and Java interfaces inspired by Google Maps (tm). This effort allows users to find solar features and events of interest, and download the corresponding data. Having found data of interest, the user now has to analyze it. The dominant solar data analysis platform is an open-source library called SolarSoft (SSW). Although SSW itself is open-source, the programming language used is IDL, a proprietary language with licensing costs that are prohibative for many institutions and individuals. SSW is composed of a collection of related scripts written by missions and individuals for solar data processing and analysis, without any consistent data structures or common interfaces. Further, at the time when SSW was initially developed, many of the best software development processes of today (mirrored and distributed version control, unit testing, continuous integration, etc.) were not standard, and have not since been adopted. The challenges inherent in developing SolarSoft led to a second software project known as SunPy. SunPy is an open-source Python-based library which seeks to create a unified solar data analysis environment including a number of core datatypes such as Maps, Lightcurves, and Spectra which have consistent interfaces and behaviors. By taking advantage of the large and sophisticated body of scientific software already available in Python (e.g. SciPy, NumPy, Matplotlib), and by adopting many of the best practices refined in open-source software development, SunPy has been able to develop at a very rapid pace while still ensuring a high level of reliability. The Helioviewer Project and SunPy represent two pioneering technologies in solar physics - simple yet flexible data visualization and a powerful, new data analysis environment. We

Open Source Drug Discovery with the Malaria Box Compound Collection for Neglected Diseases and Beyond

Science.gov (United States)

Van Voorhis, Wesley C.; Adams, John H.; Adelfio, Roberto; Ahyong, Vida; Akabas, Myles H.; Alano, Pietro; Alday, Aintzane; Alemán Resto, Yesmalie; Alsibaee, Aishah; Alzualde, Ainhoa; Andrews, Katherine T.; Avery, Simon V.; Avery, Vicky M.; Ayong, Lawrence; Baker, Mark; Baker, Stephen; Ben Mamoun, Choukri; Bhatia, Sangeeta; Bickle, Quentin; Bounaadja, Lotfi; Bowling, Tana; Bosch, Jürgen; Boucher, Lauren E.; Boyom, Fabrice F.; Brea, Jose; Brennan, Marian; Burton, Audrey; Caffrey, Conor R.; Camarda, Grazia; Carrasquilla, Manuela; Carter, Dee; Belen Cassera, Maria; Chih-Chien Cheng, Ken; Chindaudomsate, Worathad; Chubb, Anthony; Colon, Beatrice L.; Colón-López, Daisy D.; Corbett, Yolanda; Crowther, Gregory J.; Cowan, Noemi; D’Alessandro, Sarah; Le Dang, Na; Delves, Michael; Du, Alan Y.; Duffy, Sandra; Abd El-Salam El-Sayed, Shimaa; Ferdig, Michael T.; Fernández Robledo, José A.; Fidock, David A.; Florent, Isabelle; Fokou, Patrick V. T.; Galstian, Ani; Gamo, Francisco Javier; Gold, Ben; Golub, Todd; Goldgof, Gregory M.; Guha, Rajarshi; Guiguemde, W. Armand; Gural, Nil; Guy, R. Kiplin; Hansen, Michael A. E.; Hanson, Kirsten K.; Hemphill, Andrew; Hooft van Huijsduijnen, Rob; Horii, Takaaki; Horrocks, Paul; Hughes, Tyler B.; Huston, Christopher; Igarashi, Ikuo; Ingram-Sieber, Katrin; Itoe, Maurice A.; Jadhav, Ajit; Naranuntarat Jensen, Amornrat; Jensen, Laran T.; Jiang, Rays H. Y.; Kaiser, Annette; Keiser, Jennifer; Ketas, Thomas; Kicka, Sebastien; Kim, Sunyoung; Kirk, Kiaran; Kumar, Vidya P.; Kyle, Dennis E.; Lafuente, Maria Jose; Landfear, Scott; Lee, Nathan; Lee, Sukjun; Lehane, Adele M.; Li, Fengwu; Little, David; Liu, Liqiong; Llinás, Manuel; Loza, Maria I.; Lubar, Aristea; Lucantoni, Leonardo; Lucet, Isabelle; Maes, Louis; Mancama, Dalu; Mansour, Nuha R.; March, Sandra; McGowan, Sheena; Medina Vera, Iset; Meister, Stephan; Mercer, Luke; Mestres, Jordi; Mfopa, Alvine N.; Misra, Raj N.; Moon, Seunghyun; Moore, John P.; Morais Rodrigues da Costa, Francielly; Müller, Joachim; Muriana, Arantza; Nakazawa Hewitt, Stephen; Nare, Bakela; Nathan, Carl; Narraidoo, Nathalie; Nawaratna, Sujeevi; Ojo, Kayode K.; Ortiz, Diana; Panic, Gordana; Papadatos, George; Parapini, Silvia; Patra, Kailash; Pham, Ngoc; Prats, Sarah; Plouffe, David M.; Poulsen, Sally-Ann; Pradhan, Anupam; Quevedo, Celia; Quinn, Ronald J.; Rice, Christopher A.; Abdo Rizk, Mohamed; Ruecker, Andrea; St. Onge, Robert; Salgado Ferreira, Rafaela; Samra, Jasmeet; Robinett, Natalie G.; Schlecht, Ulrich; Schmitt, Marjorie; Silva Villela, Filipe; Silvestrini, Francesco; Sinden, Robert; Smith, Dennis A.; Soldati, Thierry; Spitzmüller, Andreas; Stamm, Serge Maximilian; Sullivan, David J.; Sullivan, William; Suresh, Sundari; Suzuki, Brian M.; Suzuki, Yo; Swamidass, S. Joshua; Taramelli, Donatella; Tchokouaha, Lauve R. Y.; Theron, Anjo; Thomas, David; Tonissen, Kathryn F.; Townson, Simon; Tripathi, Abhai K.; Trofimov, Valentin; Udenze, Kenneth O.; Ullah, Imran; Vallieres, Cindy; Vigil, Edgar; Vinetz, Joseph M.; Voong Vinh, Phat; Vu, Hoan; Watanabe, Nao-aki; Weatherby, Kate; White, Pamela M.; Wilks, Andrew F.; Winzeler, Elizabeth A.; Wojcik, Edward; Wree, Melanie; Wu, Wesley; Yokoyama, Naoaki; Zollo, Paul H. A.; Abla, Nada; Blasco, Benjamin; Burrows, Jeremy; Laleu, Benoît; Leroy, Didier; Spangenberg, Thomas; Wells, Timothy; Willis, Paul A.

2016-01-01

A major cause of the paucity of new starting points for drug discovery is the lack of interaction between academia and industry. Much of the global resource in biology is present in universities, whereas the focus of medicinal chemistry is still largely within industry. Open source drug discovery, with sharing of information, is clearly a first step towards overcoming this gap. But the interface could especially be bridged through a scale-up of open sharing of physical compounds, which would accelerate the finding of new starting points for drug discovery. The Medicines for Malaria Venture Malaria Box is a collection of over 400 compounds representing families of structures identified in phenotypic screens of pharmaceutical and academic libraries against the Plasmodium falciparum malaria parasite. The set has now been distributed to almost 200 research groups globally in the last two years, with the only stipulation that information from the screens is deposited in the public domain. This paper reports for the first time on 236 screens that have been carried out against the Malaria Box and compares these results with 55 assays that were previously published, in a format that allows a meta-analysis of the combined dataset. The combined biochemical and cellular assays presented here suggest mechanisms of action for 135 (34%) of the compounds active in killing multiple life-cycle stages of the malaria parasite, including asexual blood, liver, gametocyte, gametes and insect ookinete stages. In addition, many compounds demonstrated activity against other pathogens, showing hits in assays with 16 protozoa, 7 helminths, 9 bacterial and mycobacterial species, the dengue fever mosquito vector, and the NCI60 human cancer cell line panel of 60 human tumor cell lines. Toxicological, pharmacokinetic and metabolic properties were collected on all the compounds, assisting in the selection of the most promising candidates for murine proof-of-concept experiments and medicinal

Open Source Drug Discovery with the Malaria Box Compound Collection for Neglected Diseases and Beyond.

Directory of Open Access Journals (Sweden)

Wesley C Van Voorhis

2016-07-01

Full Text Available A major cause of the paucity of new starting points for drug discovery is the lack of interaction between academia and industry. Much of the global resource in biology is present in universities, whereas the focus of medicinal chemistry is still largely within industry. Open source drug discovery, with sharing of information, is clearly a first step towards overcoming this gap. But the interface could especially be bridged through a scale-up of open sharing of physical compounds, which would accelerate the finding of new starting points for drug discovery. The Medicines for Malaria Venture Malaria Box is a collection of over 400 compounds representing families of structures identified in phenotypic screens of pharmaceutical and academic libraries against the Plasmodium falciparum malaria parasite. The set has now been distributed to almost 200 research groups globally in the last two years, with the only stipulation that information from the screens is deposited in the public domain. This paper reports for the first time on 236 screens that have been carried out against the Malaria Box and compares these results with 55 assays that were previously published, in a format that allows a meta-analysis of the combined dataset. The combined biochemical and cellular assays presented here suggest mechanisms of action for 135 (34% of the compounds active in killing multiple life-cycle stages of the malaria parasite, including asexual blood, liver, gametocyte, gametes and insect ookinete stages. In addition, many compounds demonstrated activity against other pathogens, showing hits in assays with 16 protozoa, 7 helminths, 9 bacterial and mycobacterial species, the dengue fever mosquito vector, and the NCI60 human cancer cell line panel of 60 human tumor cell lines. Toxicological, pharmacokinetic and metabolic properties were collected on all the compounds, assisting in the selection of the most promising candidates for murine proof-of-concept experiments

Physics matters

CERN Document Server

Natarajan, Vasant

2017-01-01

This is a collection of essays on physics topics. It is written as a textbook for non-physics science and arts students, at the undergraduate level. Topics covered include cellphone radiation, lasers, the twin paradox, and more.

Open Source Vulnerability Database Project

Directory of Open Access Journals (Sweden)

Jake Kouns

2008-06-01

Full Text Available This article introduces the Open Source Vulnerability Database (OSVDB project which manages a global collection of computer security vulnerabilities, available for free use by the information security community. This collection contains information on known security weaknesses in operating systems, software products, protocols, hardware devices, and other infrastructure elements of information technology. The OSVDB project is intended to be the centralized global open source vulnerability collection on the Internet.

Global crowd data to understand risk taking behavior: Understanding the costs of crowd sourcing

Science.gov (United States)

Hendrikx, J.; Johnson, J.

2016-12-01

Crowd sourcing is an increasingly common approach to collect data from a large number of places, people, or both, for a given phenomenon or observation. It is often thought of as a very cost effective approach to collect data from large spatial domains, or from difficult to reach areas, or for spatially discrete observations. While crowd sourcing data can provide a wealth of data beyond that which most research teams can collect themselves, there are many associated, and sometime unexpected costs with this approach. We present a case study of a crowd-sourced data collection campaign to collect GPS tracks of back country recreationalists in avalanche terrain. We ask the volunteers to track their outings using the GPS on their smart phone using a free application, and on the completion of their trip email us their track. On receipt of this track we automatically reply with a link to a decision making survey. In this way we collect data on both the physical attributes of their trip, as well as the social, psychological and demographic data about the person. While this approach has been very successful, it has come at a high cost time-wise. Much like the role of an online course instructor, instructor (or in this case researcher) presence is essential. Replying to emails, updating webpages, posting on social media, and connecting with your volunteer data collectors can become a full time job - and that's even before you start the data analysis. We encourage future researchers to plan ahead for this when starting a crowd sourcing project involving the general public, and seek advice and training in social media, web site development and communication techniques like semi-automated email.

Physical sampling for site and waste characterization

International Nuclear Information System (INIS)

Bonnough, T.L.

1996-01-01

Physical sampling plays a basic role in high-level radioactive waste management program effort. The term ''physical sampling'' used here means collecting tangible, physical samples of soil, water, air, waste streams, or other materials. The industry defines the term ''physical sampling'' broadly to include measurements of physical conditions such as temperature, wind conditions, and pH, which are also often taken in a sample collection effort. Most environmental compliance actions are supported by the results of taking, recording, and analyzing physical samples and the measurements of physical conditions taken in association with sample collecting. Therefore, the when and how to take samples is needed to be known and planned

78 FR 33846 - Agency Information Collection Activities; Proposed Collection; Comment Request; Biological...

Science.gov (United States)

2013-06-05

..., and Forms FDA 3486 and 3486A. DATES: Submit electronic or written comments on the collection of information by August 5, 2013. ADDRESSES: Submit electronic comments on the collection of information to: http... Source Plasma, unlicensed registered blood establishments, and transfusion services, who had control over...

Novel uses of a wide beam saddle field ion source for producing targets used in nuclear physics experiments at the Argonne National Laboratory ATLAS facility

International Nuclear Information System (INIS)

Greene, J.P.; Thomas, G.E.

1996-01-01

The wide beam ion sputter source has several unique characteristics which make it very useful for producing, reducing the thickness or cleaning the surface of targets needed for nuclear physics experiments. A discussion of these techniques as well as the sputter source characteristics will be given. Sputter yields obtained utilizing the source are presented for a variety of materials common to nuclear target production

Biographical Sources in the Sciences--Life, Earth and Physical Sciences (1989-2006). LC Science Tracer Bullet. TB 06-4

Science.gov (United States)

Freitag, Ruth, Comp.; Bradley, Michelle Cadoree, Comp.

2006-01-01

This guide offers a systematic approach to the wide variety of published biographical information on men and women of science in the life, earth and physical sciences, primarily from 1989 to 2006, and complements Library of Congress Science Tracer Bullet "TB88-3" ("Biographical Sources in the Sciences," compiled 1988 [ED306074]) and "TB06-7"…

Zooplankton, physical, and other data collected from net and bottle casts in North Pacific Ocean from HAKUHO-MARU; 22 November 1982 to 14 February 1983 (NODC Accession 9600145)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Zooplankton species identities, physical, and other data were collected using net and bottle casts in the North Pacific Ocean from HAKUHO-MARU. Data were collected...

Completeness and overlap in open access systems: Search engines, aggregate institutional repositories and physics-related open sources.

Directory of Open Access Journals (Sweden)

Ming-Yueh Tsay

Full Text Available This study examines the completeness and overlap of coverage in physics of six open access scholarly communication systems, including two search engines (Google Scholar and Microsoft Academic, two aggregate institutional repositories (OAIster and OpenDOAR, and two physics-related open sources (arXiv.org and Astrophysics Data System. The 2001-2013 Nobel Laureates in Physics served as the sample. Bibliographic records of their publications were retrieved and downloaded from each system, and a computer program was developed to perform the analytical tasks of sorting, comparison, elimination, aggregation and statistical calculations. Quantitative analyses and cross-referencing were performed to determine the completeness and overlap of the system coverage of the six open access systems. The results may enable scholars to select an appropriate open access system as an efficient scholarly communication channel, and academic institutions may build institutional repositories or independently create citation index systems in the future. Suggestions on indicators and tools for academic assessment are presented based on the comprehensiveness assessment of each system.

100 Years of Attempts to Transform Physics Education

Science.gov (United States)

Otero, Valerie K.; Meltzer, David E.

2016-12-01

As far back as the late 1800s, U.S. physics teachers expressed many of the same ideas about physics education reform that are advocated today. However, several popular reform efforts eventually failed to have wide impact, despite strong and enthusiastic support within the physics education community. Broad-scale implementation of improved instructional models today may be just as elusive as it has been in the past, and for similar reasons. Although excellent instructional models exist and have been available for decades, effective and scalable plans for transforming practice on a national basis have yet to be developed and implemented. Present-day teachers, education researchers, and policy makers can find much to learn from past efforts, both in their successes and their failures. To this end, we present a brief outline of some key ideas in U.S. physics education during the past 130 years. We address three core questions that are prominent in the literature: (a) Why and how should physics be taught? (b) What physics should be taught? (c) To whom should physics be taught? Related issues include the role of the laboratory and attempts to make physics relevant to everyday life. We provide here only a brief summary of the issues and debates found in primary-source literature; an extensive collection of historical resources on physics education is available at https://sites.google.com/site/physicseducationhistory/home.

76 FR 20675 - Agency Information Collection Activities; Proposed Collection; Comment Request; Experimental...

Science.gov (United States)

2011-04-13

...-specific disclosure (e.g., ``Sensible Solution: Good Source of Calcium, Good Sources of 8 Vitamins and... collect information from 4,000 English-speaking adult members of an online consumer panel maintained by a... . 5. Kraft Foods. Sensible Solution. 2010. Available at http://www.kraftrecipes.com/kf/HealthyLiving...

Utilisation of Rep-PCR to track microbes in aerosols collected adjacent to their source, a saline lake in Victoria, Australia.

Science.gov (United States)

Munday, Chris I; O'Loingsigh, Tadhg; Tapper, Nigel J; De Deckker, Patrick; Allison, Gwen E

2013-04-15

Dust storms are a major source of aerosolized bacteria, especially in the drought conditions experienced in Australia in the decade to 2009. The major aims of this project were to identify the culturable bacteria in environmental samples and to genetically fingerprint all isolates using repetitive element PCR (Rep-PCR) to investigate the possibility of tracking isolates from their source into the atmosphere. Four field trips were conducted to a dry lake in western Victoria, Australia to sample aerosols and sediments. Aerosols were collected at heights up to 150 m using vacuum pumps with filters attached to a tethered helium balloon, while corresponding sediments were collected in sterile polypropylene tubes. Isolates were cultivated on Tryptic Soy Agar, R2 Agar and Marine Agar, and grown in dark conditions at ambient temperature. By sequencing the 16S rRNA gene of 270 isolates, fifteen different bacterial families were identified, with both the aerosols and sediments dominated by the Bacillaceae family. Four sets of Rep-PCR primers were tested, with the ERIC and (GTG)5 primers proving to be the most suitable for fingerprinting the cultured taxa. Rep-PCR revealed very high strain diversity in the samples collected, however some strains were still able to be tracked from sediments up to 150 m in height. This shows the potential of Rep-PCR, however very large reference databases would be required for the technique to be more useful. Copyright © 2013 Elsevier B.V. All rights reserved.

Development of user-friendly and interactive data collection system for cerebral palsy.

Science.gov (United States)

Raharjo, I; Burns, T G; Venugopalan, J; Wang, M D

2016-02-01

Cerebral palsy (CP) is a permanent motor disorder that appears in early age and it requires multiple tests to assess the physical and mental capabilities of the patients. Current medical record data collection systems, e.g., EPIC, employed for CP are very general, difficult to navigate, and prone to errors. The data cannot easily be extracted which limits data analysis on this rich source of information. To overcome these limitations, we designed and prototyped a database with a graphical user interface geared towards clinical research specifically in CP. The platform with MySQL and Java framework is reliable, secure, and can be easily integrated with other programming languages for data analysis such as MATLAB. This database with GUI design is a promising tool for data collection and can be applied in many different fields aside from CP to infer useful information out of the vast amount of data being collected.

The 1989 progress report: Physics of the Ionized Media

International Nuclear Information System (INIS)

Gresillon, D.; Virmont, J.

1989-01-01

The 1989 progress report of the laboratory of Physics of the Ionized Media of the Polytechnic School (France) is presented. The research projects were carried out in the following fields: plasma waves localization, wave beatings, collective scattering, fluctuation and transport in magnetic fusion plasmas, the construction of ALTAIR (French acronym for local analysis of anomalous transport by infrared), sources of negative ion beams, z-pinch and laser plasma diagnostics, computer codes on plasma dynamics. The published papers, the conferences and the Laboratory staff are listed [fr

Radiation sources working group summary

International Nuclear Information System (INIS)

Fazio, M.V.

1998-01-01

The Radiation Sources Working Group addressed advanced concepts for the generation of RF energy to power advanced accelerators. The focus of the working group included advanced sources and technologies above 17 GHz. The topics discussed included RF sources above 17 GHz, pulse compression techniques to achieve extreme peak power levels, components technology, technology limitations and physical limits, and other advanced concepts. RF sources included gyroklystrons, magnicons, free-electron masers, two beam accelerators, and gyroharmonic and traveling wave devices. Technology components discussed included advanced cathodes and electron guns, high temperature superconductors for producing magnetic fields, RF breakdown physics and mitigation, and phenomena that impact source design such as fatigue in resonant structures due to RF heating. New approaches for RF source diagnostics located internal to the source were discussed for detecting plasma and beam phenomena existing in high energy density electrodynamic systems in order to help elucidate the reasons for performance limitations

Carl Friedrich von Weizsäcker major texts in physics

CERN Document Server

2014-01-01

This book presents a collection of texts by the German physicist and philosopher Carl Friedrich von Weizsäcker (1912-2007), for use in seminars on the history, epistemology and structure of physics. Most texts appear in English for the first time. Weizsäcker became famous through his works in physics, mainly in the early development of nuclear physics. Later he would also become well known as a philosopher and analyst of contemporary culture. Texts include the original publications of the “Weizsäcker-Bethe formula” of nuclear masses and the “Bethe-Weizsäcker cycle,” which explains the source of energy in the sun; both were developed by Bethe at the same time and independently of Weizsäcker. Further texts deal with Weizsäcker’s explanation of the origin of planets, his explanation of the “time arrow” in Statistical Mechanics and his analyses of Quantum Mechanics and the structure of physics in general.

76 FR 82300 - Agency Information Collection Activities; Proposed Collection; Comment Request; Revisions to...

Science.gov (United States)

2011-12-30

... Requirements for Blood and Blood Components, Including Source Plasma AGENCY: Food and Drug Administration, HHS..., including Source Plasma. These requirements will facilitate the use of a labeling system using machine.... DATES: Submit either electronic or written comments on the collection of information by February 28...

Coupled Hydrodynamic and Wave Propagation Modeling for the Source Physics Experiment: Study of Rg Wave Sources for SPE and DAG series.

Science.gov (United States)

Larmat, C. S.; Delorey, A.; Rougier, E.; Knight, E. E.; Steedman, D. W.; Bradley, C. R.

2017-12-01

This presentation reports numerical modeling efforts to improve knowledge of the processes that affect seismic wave generation and propagation from underground explosions, with a focus on Rg waves. The numerical model is based on the coupling of hydrodynamic simulation codes (Abaqus, CASH and HOSS), with a 3D full waveform propagation code, SPECFEM3D. Validation datasets are provided by the Source Physics Experiment (SPE) which is a series of highly instrumented chemical explosions at the Nevada National Security Site with yields from 100kg to 5000kg. A first series of explosions in a granite emplacement has just been completed and a second series in alluvium emplacement is planned for 2018. The long-term goal of this research is to review and improve current existing seismic sources models (e.g. Mueller & Murphy, 1971; Denny & Johnson, 1991) by providing first principles calculations provided by the coupled codes capability. The hydrodynamic codes, Abaqus, CASH and HOSS, model the shocked, hydrodynamic region via equations of state for the explosive, borehole stemming and jointed/weathered granite. A new material model for unconsolidated alluvium materials has been developed and validated with past nuclear explosions, including the 10 kT 1965 Merlin event (Perret, 1971) ; Perret and Bass, 1975). We use the efficient Spectral Element Method code, SPECFEM3D (e.g. Komatitsch, 1998; 2002), and Geologic Framework Models to model the evolution of wavefield as it propagates across 3D complex structures. The coupling interface is a series of grid points of the SEM mesh situated at the edge of the hydrodynamic code domain. We will present validation tests and waveforms modeled for several SPE tests which provide evidence that the damage processes happening in the vicinity of the explosions create secondary seismic sources. These sources interfere with the original explosion moment and reduces the apparent seismic moment at the origin of Rg waves up to 20%.

Seasonal provenance changes in present-day Saharan dust collected in and off Mauritania

Directory of Open Access Journals (Sweden)

C. A. Friese

2017-08-01

Full Text Available Saharan dust has a crucial influence on the earth climate system and its emission, transport and deposition are intimately related to, e.g., wind speed, precipitation, temperature and vegetation cover. The alteration in the physical and chemical properties of Saharan dust due to environmental changes is often used to reconstruct the climate of the past. However, to better interpret possible climate changes the dust source regions need to be known. By analysing the mineralogical composition of transported or deposited dust, potential dust source areas can be inferred. Summer dust transport off northwest Africa occurs in the Saharan air layer (SAL. In continental dust source areas, dust is also transported in the SAL; however, the predominant dust input occurs from nearby dust sources with the low-level trade winds. Hence, the source regions and related mineralogical tracers differ with season and sampling location. To test this, dust collected in traps onshore and in oceanic sediment traps off Mauritania during 2013 to 2015 was analysed. Meteorological data, particle-size distributions, back-trajectory and mineralogical analyses were compared to derive the dust provenance and dispersal. For the onshore dust samples, the source regions varied according to the seasonal changes in trade-wind direction. Gibbsite and dolomite indicated a Western Saharan and local source during summer, while chlorite, serpentine and rutile indicated a source in Mauritania and Mali during winter. In contrast, for the samples that were collected offshore, dust sources varied according to the seasonal change in the dust transporting air layer. In summer, dust was transported in the SAL from Mauritania, Mali and Libya as indicated by ferroglaucophane and zeolite. In winter, dust was transported with the trades from Western Sahara as indicated by, e.g., fluellite.

Effect of Supplementation Purslane (Portulaca oleracea as a Source of Alpha-Linolenic Acid on Production Performance and Physical Quality of Egg of Laying Hens

Directory of Open Access Journals (Sweden)

Lilik Kartikasari

2015-09-01

Full Text Available The aim of the study was to evaluate the effects of inclusion plant source of n 3 fat in the form of alpha-linolenic acid (ALA, 18:3n-3 on the diets of layers on production performance and physical quality of eggs. A total of  125 Hy-Line Brown hens (38 weeks old were placed at individual cages and assigned to five dietary treatments. The dietary treatments were supplemented with 0, 1.5, 3.0, 4.5 and 6.0% purslane meal. Laying hens were fed for five weeks following a seven day adaptation period. Water and feed were provided ad libitum. Feed intake (FI measured weekly and feed consumption ratio (FCR was calculated at the end of the trial. A total of 25 egg yolk samples of day 35 (n = 5 egg yolks for each treatment were collected to analyse physical quality of eggs. The data were analyzed using Analysis of Variance (ANOVA. Differences between treatment means were further analyzed using Duncan's New Multiple Range Test (DMRT. Results showed that the incorporation of plants rich in ALA did not modify FI, FCR, and egg production. Supplementation of purslane meal in the diets had no effect on physical quality of eggs, including egg weight, yolk weight, albumen index, yolk index and Haugh Unit (HU. The average of egg weight and yolk weight were 60,5 and 15.3 g, respectively. Diet containing purslane meal increased yolk colour. In conclusion, laying hens that fed diet supplemented with purslane meal rich in ALA improved yolk colour and did not change the production performance of the laying hens or the qualities of the eggs.

Reflections on collectivity

International Nuclear Information System (INIS)

Feshbach, H.

1983-01-01

Comments are made on papers presented to the International School of Nuclear Physics, Erice (1982) concerning collective bands and collectivity in nuclei. The importance of these collective modes of motion, the role of the Bohr-Mottelson model and the Interacting Boson Models (IBM-1 and IBM-2), and experimental evidence presented by a number of workers, are examined. The extensions of the models to take into account additional degrees of freedom both collective and non-collective, the discovery of new collective modes such as those corresponding to tri-axial shapes, and the possible existence of additional symmetries reported at the meeting, are discussed. Finally the importance is examined of relating the phenomenological models to a more fundamental underlying theory, which has been taken to be the nuclear shell model. (U.K.)

High School Physics, Two-Year Colleges, and Physics Majors

Science.gov (United States)

White, Susan C.

2013-01-01

We have just completed the data collection for our 2012-13 Nationwide Survey of High School Physics and expect to have results to report in the spring. In the interim, we will take a look at physics in two-year colleges (TYCs). In 2007, we surveyed undergraduate seniors in degree-granting physics departments, and we asked these students if they…

Proposal for a source of polarized protons; Projet de source de protons polarises

Energy Technology Data Exchange (ETDEWEB)

Abragam, A.; Winter, J. M. [Commissariat a l' energie atomique et aux energies alternatives - CEA, Centre d' Etudes Nucleaires de Saclay, BP2, Gif-sur-Yvette (France)

1959-07-01

Proposal for a source of polarized protons based on the theory of adiabatic fast passage due to F. Bloch. Reprint of a paper published in 'Physical review letters', vol 1, n. 10, 15 Nov 1958, p. 374-375 [French] On propose une methode nouvelle pour la realisation d'une source de protons polarises basee sur la theorie du passage adiabatique de F. Bloch. Reproduction d'un article publie dans 'Physical review letters', vol 1, n. 10, 15 nov 1958, p. 374-375.

Elemental composition of urban aerosol collected in Florence, Italy

International Nuclear Information System (INIS)

Lucarelli, F.; Mando, P.A.; Nava, S.; Prati, P.; Zucchiatti, A.

2000-01-01

An extensive investigation is in progress aiming at the characterisation of the air particulate composition in Florence. The aim is to determine the aerosol elemental concentrations as well to identify pollution sources. For our investigation, we use the external PIXE-PIGE beam facility of the Van de Graaff accelerator of INFN at the Physics Department of the Florence University. We report here an overview of the results of the PIXE analysis of a long temporal series (about 1 yr) of PM 10 particulate collected on Millipore filters on a daily basis in three different sites (characterised by different urban settings). Daily concentrations of more than 20 elements have been obtained. From the observed elemental concentrations seasonal variation were found. A relevant decrease of S, Pb and Br levels has been found with respect to 10 yr ago. Four main sources (traffic, sulphates, soil-dust and wind-transported sea-salt) have been extracted with the help of factor analysis

The proceedings of the 14th national symposium on atomic physics and nuclear physics and the 7th annual meeting on modern physics

International Nuclear Information System (INIS)

2002-01-01

It is the proceedings of the 14th national symposium on atomic physics and nuclear physics and the 7th annual meeting on modern physics. 27 theses are collected in these proceedings. Many of them are related with nuclear physics

Ratio of thyroid radioiodine uptake calculated via the physic decay rate of the standard radioactive source: a preliminary study

International Nuclear Information System (INIS)

Zeng Yu; Zhou Luyi

2010-01-01

Objectives: To compare the difference of the ratio of thyroid radioiodine ( 131 I) uptake calculated by actually measuring counts of the standard radioactive source(method 1) and by computing counts of the standard radioactive source via physic half life of 131 I (method 2). Methods: Two hundred and nine consecutive patients with Graves' Disease were prospectively recruited. The ratio of thyroid 131 I uptake was calculated by two methods at 4 h and 24 h after administration of 1.48 MBq 131 I, respectively. Paired t-test was used to compare the difference between the two methods. Results: The ratio of thyroid 131 I uptake at 4h was (32±16)% and ( 35±10)% (t=1.98, P=0.20), at 24h (72±19)% and (69±24)% ( t=1.49, P=0.23), respectively, by the two methods. Conclusion: To calculate the ratio of thyroid 131 I uptake via the physic half life of the standard radioactive resource is feasible, and can both reduce the risk of ionizing radiation to technical staff and act as verifying method for quality control of thyroid function equipment. (authors)

An Inexpensive Source of High Voltage

Science.gov (United States)

Saraiva, Carlos

2012-01-01

As a physics teacher I like recycling old apparatus and using them for demonstrations in my classes. In physics laboratories in schools, sources of high voltage include induction coils or electronic systems that can be bought from companies that sell lab equipment. But these sources can be very expensive. In this article, I will explain how you…

A study of physics of sub-critical multiplicative systems driven by sources and the utilization of deterministic codes in calculation of this systems

International Nuclear Information System (INIS)

Antunes, Alberi

2008-01-01

This work presents the Physics of Source Driven Systems (ADS). It shows some statics and K i netics parameters of the reactor Physics and when it is sub critical, that are important in evaluation and definition of these systems. The objective is to demonstrate that there are differences in parameters when the reactor is critical. Moreover, the work shows the differences observed in the parameters for different calculation models. Two calculation methodologies are shown In this dissertation: Gandini and Salvatores and Dulla, and some parameters are calculated. The ANISN deterministic transport code is used in calculation in order to compare these parameters. In a subcritical configuration of IPEN-MB-01 Reactor driven by an external source some parameters are calculated. The conclusions about calculation realized are presented in end of work. (author)

The Interactions of Relationships, Interest, and Self-Efficacy in Undergraduate Physics

Science.gov (United States)

Dou, Remy

This collected papers dissertation explores students' academic interactions in an active learning, introductory physics settings as they relate to the development of physics self-efficacy and interest. The motivation for this work extends from the national call to increase participation of students in the pursuit of science, technology, engineering, and mathematics (STEM) careers. Self-efficacy and interest are factors that play prominent roles in popular, evidence-based, career theories, including the Social cognitive career theory (SCCT) and the identity framework. Understanding how these constructs develop in light of the most pervasive characteristic of the active learning introductory physics classroom (i.e., peer-to-peer interactions) has implications on how students learn in a variety of introductory STEM classrooms and settings structured after constructivist and sociocultural learning theories. I collected data related to students' in-class interactions using the tools of social network analysis (SNA). Social network analysis has recently been shown to be an effective and useful way to examine the structure of student relationships that develop in and out of STEM classrooms. This set of studies furthers the implementation of SNA as a tool to examine self-efficacy and interest formation in the active learning physics classroom. Here I represent a variety of statistical applications of SNA, including bootstrapped linear regression (Chapter 2), structural equation modeling (Chapter 3), and hierarchical linear modeling for longitudinal analyses (Chapter 4). Self-efficacy data were collected using the Sources of Self-Efficacy for Science Courses - Physics survey (SOSESC-P), and interest data were collected using the physics identity survey. Data for these studies came from the Modeling Instruction sections of Introductory Physics with Calculus offered at Florida International University in the fall of 2014 and 2015. Analyses support the idea that students

Physical profile data collected during the calendar year 2003 for the Tropical Atmosphere Ocean Project by NOAA's Pacific Marine Environment Lab (NODC Accession 0001364)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical profile data were collected using meteorological sensors and CTD casts in the Northeast Pacific Ocean from NOAA Ship KA'IMIMOANA and NOAA Ship RONALD H....

Entropy as a collective variable

Science.gov (United States)

Parrinello, Michele

Sampling complex free energy surfaces that exhibit long lived metastable states separated by kinetic bottlenecks is one of the most pressing issues in the atomistic simulations of matter. Not surprisingly many solutions to this problem have been suggested. Many of them are based on the identification of appropriate collective variables that span the manifold of the slow varying modes of the system. While much effort has been put in devising and even constructing on the fly appropriate collective variables there is still a cogent need of introducing simple, generic, physically transparent, and yet effective collective variables. Motivated by the physical observation that in many case transitions between one metastable state and another result from a trade off between enthalpy and entropy we introduce appropriate collective variables that are able to represent in a simple way these two physical properties. We use these variables in the context of the recently introduced variationally enhanced sampling and apply it them with success to the simulation of crystallization from the liquid and to conformational transitions in protein. Department of Chemistry and Applied Biosciences, ETH Zurich, and Facolta' di Informatica, Istituto di Scienze Computazionali, Universita' della Svizzera Italiana, Via G. Buffi 13, 6900 Lugano, Switzerland.

Digital intelligence sources transporter

International Nuclear Information System (INIS)

Zhang Zhen; Wang Renbo

2011-01-01

It presents from the collection of particle-ray counting, infrared data communication, real-time monitoring and alarming, GPRS and other issues start to realize the digital management of radioactive sources, complete the real-time monitoring of all aspects, include the storing of radioactive sources, transporting and using, framing intelligent radioactive sources transporter, as a result, achieving reliable security supervision of radioactive sources. (authors)

Simulation of Light Collection for Neutron Electrical Dipole Moment measurement

Science.gov (United States)

Ji, Pan; nEDM Collaboration

2017-09-01

nEDM (Neutron Electrical Dipole moment) measurement addresses a critical topic in particle physics and Standard Model, that is CPT violation in neutron electrical dipole moment if detected in which the Time reversal violation is connected to the matter/antimatter imparity of the universe. The neutron electric dipole moment was first measured in 1950 by Smith, Purcell, and Ramsey at the Oak Ridge Reactor - the first intense neutron source. This measurement showed that the neutron was very nearly round (to better than one part in a million). The goal of the nEDM experiment is to further improve the precision of this measurement by another factor of 100. The signal from the experiment is detected by collecting the photons generated when neutron beams were captured by liquid helium 3. The Geant4 simulation project that I participate simulates the process of light collection to improve the design for higher capture efficiency. The simulated geometry includes light source, reflector, wavelength shifting fibers, wavelength shifting TPB and acrylic as in real experiment. The UV photons exiting from Helium go through two wavelength-shifting processes in TPB and fibers to be finally captured. Oak Ridge National Laboratory Neutron Electric Dipole Moment measurement project.

The IAEA and Control of Radioactive Sources

International Nuclear Information System (INIS)

Dodd, B.

2004-01-01

The presentation discusses the authoritative functions and the departments of the IAEA, especially the Department of Nuclear Safety and Security and its Safety and Security of Radiation Sources Unit. IAEA safety series and IAEA safety standards series inform about international standards, provide underlying principles, specify obligations and responsibilities and give recommendations to support requirements. Other IAEA relevant publications comprise safety reports, technical documents (TECDOCs), conferences and symposium papers series and accident reports. Impacts of loss of source control is discussed, definitions of orphan sources and vulnerable sources is given. Accidents with orphan sources, radiological accidents statistic (1944-2000) and its consequences are discussed. These incidents lead to development of the IAEA guidance. The IAEA's action plan for the safety of radiation sources and the security of radioactive material was approved by the IAEA Board of Governors and the General Conference in September 1999. This led to the 'Categorization of Radiation Sources' and the 'Code of Conduct on the Safety and Security of Radioactive Sources'. After 0911 the IAEA developed a nuclear security plan of activities including physical protection of nuclear material and nuclear facilities, detection of malicious activities involving nuclear and other radioactive materials, state systems for nuclear material accountancy and control, security of radioactive material other than nuclear material, assessment of safety and security related vulnerability of nuclear facilities, response to malicious acts, or threats thereof, adherence to and implementation of international agreements, guidelines and recommendations and nuclear security co-ordination and information management. The remediation of past problems comprised collection and disposal of known disused sources, securing vulnerable sources and especially high-risk sources (Tripartite initiative), searching for

Business Intelligence: The Smart Way to Track Academic Collections

Science.gov (United States)

Kelly, Debra

2005-01-01

University collections are a vital source of knowledge for researchers and often a source of pride for universities. Without an effective way to manage and query them, however, collections often go underutilized. Parts of a collection can remain untapped for years, and the larger it grows, the more difficult management becomes. Unfortunately,…

Adapting smart phone applications about physics education to blind students

Science.gov (United States)

Bülbül, M. Ş.; Yiğit, N.; Garip, B.

2016-04-01

Today, most of necessary equipment in a physics laboratory are available for smartphone users via applications. Physics teachers may measure from acceleration to sound volume with its internal sensors. These sensors collect data and smartphone applications make the raw data visible. Teachers who do not have well-equipped laboratories at their schools may have an opportunity to conduct experiments with the help of smart phones. In this study, we analyzed possible open source physics education applications in terms of blind users in inclusive learning environments. All apps are categorized as partially, full or non-supported. The roles of blind learner’s friend during the application are categorized as reader, describer or user. Mentioned apps in the study are compared with additional opportunities like size and downloading rates. Out of using apps we may also get information about whether via internet and some other extra information for different experiments in physics lab. Q-codes reading or augmented reality are two other opportunity provided by smart phones for users in physics labs. We also summarized blind learner’s smartphone experiences from literature and listed some suggestions for application designers about concepts in physics.

Oil spill aftermath : temporal evaluation of hydrocarbon sources in Guanabara Bay, Brazil

International Nuclear Information System (INIS)

Meniconi, M.F.G.; Massone, C.G.; Scofield, A.L.; Junior, V.J.F.

2005-01-01

The sources of polycyclic aromatic hydrocarbons (PAH) in environmental ecosystems are both natural and anthropogenic. PAHs interact with different types of environmental compartments and are subject to processes that lead to geochemical fates such as physical-chemical transformation, biodegradation and photo-oxidation. This study examined the sources of PAHs in the estuarine sediment of Guanabara Bay, Brazil following an accidental oil spill from an oil refinery in January 2000. The main portion of the oil was carried by tidal currents and wind. It spread over the water and reached islands and shorelines at the north part of the bay. The objective of this study was to determine the likely sources of hydrocarbons in the bay where untreated municipal sewage and industrial wastes are also dumped. Sediment samples were collected using cores and dredges from the intertidal and subtidal regions of the bay, reflecting both affected and unaffected areas. This paper summarized the results of 16 EPA priority PAH and their alkylated homologues from 21 sediment samples collected in the bay 10 days after the oil spill, immediately after the clean up effort, and then 3 years later. The hydrocarbon source was determined using PAH ratios for the samples studied. The highest PAH concentration was observed in 2000 as a result of the petrogenic and pyrolytic contribution to the sediments. 38 refs., 3 tabs., 9 figs

Development of the negative ion source at the National Laboratory for High Energy Physics

Energy Technology Data Exchange (ETDEWEB)

Takagi, Akira [National Lab. for High Energy Physics, Tsukuba, Ibaraki (Japan)

1997-02-01

On formation of direct high frequency chopped negative hydrogen ion beam from surface forming type negative hydrogen ion source, incident acceleration due to proton synchrotron was tried for a forming experiment and its application. By overlapping a high frequency pulse onto a bias DC voltage of convertor electrode, control of formation of negative hydrogen ion with high speed RF pulse of 2 MHz could be realized. And, incidence into 12 GeV proton accelerator to catch RF particles with waiting bucket system due to booster synchrotron, was effective for control of longitudinal emittance in the booster synchrotron. As a result, controls of the beam width and shape emitted from the booster synchrotron were possible. On application of high speed chopped negative hydrogen ion beam to accelerator, improvement of beam capture efficiency to the accelerated RF bucket, control of longitudinal emittance of accelerated beam, beam measurement at incidence into the accelerator and so forth were conducted. In this paper, results of the high speed chopped beam formation experiment using surface plasma forming type negative ion source and application of high speed beam chopping method synchronized with high frequency pulse at the National Laboratory of High Energy Physics are described. (G.K.)

Positron sources

International Nuclear Information System (INIS)

Chehab, R.

1994-01-01

A tentative survey of positron sources is given. Physical processes on which positron generation is based are indicated and analyzed. Explanation of the general features of electromagnetic interactions and nuclear β + decay makes it possible to predict the yield and emittance for a given optical matching system between the positron source and the accelerator. Some kinds of matching systems commonly used - mainly working with solenoidal field - are studied and the acceptance volume calculated. Such knowledge is helpful in comparing different matching systems. Since for large machines, a significant distance exists between the positron source and the experimental facility, positron emittance has to be preserved during beam transfer over large distances and methods used for that purpose are indicated. Comparison of existing positron sources leads to extrapolation to sources for future linear colliders. Some new ideas associated with these sources are also presented. (orig.)

Optimising measurement of health-related characteristics of the built environment: Comparing data collected by foot-based street audits, virtual street audits and routine secondary data sources.

Science.gov (United States)

Pliakas, Triantafyllos; Hawkesworth, Sophie; Silverwood, Richard J; Nanchahal, Kiran; Grundy, Chris; Armstrong, Ben; Casas, Juan Pablo; Morris, Richard W; Wilkinson, Paul; Lock, Karen

2017-01-01

The role of the neighbourhood environment in influencing health behaviours continues to be an important topic in public health research and policy. Foot-based street audits, virtual street audits and secondary data sources are widespread data collection methods used to objectively measure the built environment in environment-health association studies. We compared these three methods using data collected in a nationally representative epidemiological study in 17 British towns to inform future development of research tools. There was good agreement between foot-based and virtual audit tools. Foot based audits were superior for fine detail features. Secondary data sources measured very different aspects of the local environment that could be used to derive a range of environmental measures if validated properly. Future built environment research should design studies a priori using multiple approaches and varied data sources in order to best capture features that operate on different health behaviours at varying spatial scales. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Physical Educators' Habitual Physical Activity and Self-Efficacy for Regular Exercise

Science.gov (United States)

Zhu, Xihe; Haegele, Justin A.; Davis, Summer

2018-01-01

The purpose of this study was to examine physical education teachers' habitual physical activity and self-efficacy for regular exercise. In-service physical education teachers (N = 168) voluntarily completed an online questionnaire that included items to collect demographic information (gender, race/ethnicity, years of teaching experience, and…

Sealed radioactive source management

International Nuclear Information System (INIS)

2005-01-01

Sealed radioactive sources have been used in a wide range of application in medicine, agriculture, geology, industry and other fields. Since its utilization many sources have become out of use and became waste but no proper management. This has lead to many accidents causing deaths and serious radiation injuries worldwide. Spent sources application is expanding but their management has seen little improvements. Sealed radioactive sources have become a security risk calling for prompt action. Source management helps to maintain sources in a good physical status and provide means of source tracking and control. It also provides a well documented process of the sources making any future management options safe, secure and cost effective. Last but not least good source management substantially reduces the risk of accidents and eliminates the risk of malicious use. The International Atomic Energy Agency assists Member States to build the infrastructure to properly manage sealed radioactive sources. The assistance includes training of national experts to handle, condition and properly store the sources. For Member States that do not have proper facilities, we provide the technical assistance to design a proper facility to properly manage the radioactive sources and provide for their proper storage. For Member States that need to condition their sources properly but don't have the required infrastructure we provide direct assistance to physically help them with source recovery and provide an international expert team to properly condition their sources and render them safe and secure. We offer software (Radioactive Waste Management Registry) to properly keep a complete record on the sources and provide for efficient tracking. This also helps with proper planning and decision making for long term management

Physics: quantum mechanics

International Nuclear Information System (INIS)

Basdevant, J.L.

1983-01-01

This book is the second part of the physic lectures on quantum mechanics from Ecole Polytechnique. It contains some physic complements a little more thoroughly studied, mathematical complements to which refer, and an exercise and problem collection [fr

SPS Internship: Working With Physics To Go

Science.gov (United States)

Hancock, Logan

2008-10-01

The Physics To Go website (www.physicstogo.com) is one of many collections of ComPADRE, an online library of electronic resources devoted to physics and astronomy education, funded by the National Science Foundation. Physics To Go, produced by the American Physical Society (APS), is a collection focused on informal physics learning, targeted towards self-motivated learners and the general public. My contributions to the site this summer consisted of obtaining useful materials to add to the collection and working to update the homepage's ``mini-magazine'' every two weeks. I was selected for this position at APS by the Society of Physics Students (SPS) summer internship program, hosted by the American Institute of Physics (AIP) in College Park, MD. This internship is presented to a number of physics undergraduates each year and offers opportunities in research and science policy/outreach positions at SPS, APS, AAPT, NASA, and NIST.

76 FR 24911 - Notice of Submission of Proposed Information Collection to OMB; Public Housing Physical Needs...

Science.gov (United States)

2011-05-03

...The proposed information collection requirement described below has been submitted to the Office of Management and Budget (OMB) for review, as required by the Paperwork Reduction Act. The Department is soliciting public comments on the subject proposal. PHAs will complete a PNA once every 5 years, will update the PNA annually, and will submit information electronically to HUD. The information is used by PHAs as a strategic and capital planning tool. The information uploaded to HUD will be used for aggregation of an estimate of the capital needs across the Public Housing portfolio and evaluation of the impact of the Capital Fund in meeting the physical needs based upon review of the annual updates.

Neutron physics entering the 21st century

International Nuclear Information System (INIS)

Aksenov, V.L.

2000-01-01

The objectives of present-day neutron physics are neutron-aided investigations of fundamental interactions and symmetries, high excited states of nuclei, crystalline and magnetic structures, dynamic excitations in solids and liquids over a wide range of energies. The state-of-art and perspectives of the solution of most topical and principle problems of neutron physics are analyzed. The main conclusion is that neutron physics provides rich information for nuclear particle physics, physics of nucleus, condensed matter physics, chemistry, biology, materials science, and earth sciences. In the next century, however, new higher flux neutron sources must be created. By the year 2010 the number of nuclear reactors used for physical research will reduce to 10-15 reactors over the world. Trends in the development of neutron sources are analyzed. The possibilities of leading neutron research centers in the world are considered and most promising projects of neutron sources are discussed. (author)

Positron sources

International Nuclear Information System (INIS)

Chehab, R.

1989-01-01

A tentative survey of positron sources is given. Physical processes on which positron generation is based are indicated and analyzed. Explanation of the general features of electromagnetic interactions and nuclear β + decay makes it possible to predict the yield and emittance for a given optical matching system between the positron source and the accelerator. Some kinds of matching systems commonly used - mainly working with solenoidal fields - are studied and the acceptance volume calculated. Such knowledge is helpful in comparing different matching systems. Since for large machines, a significant distance exists between the positron source and the experimental facility, positron emittance has to be preserved during beam transfer over large distances and methods used for that purpose are indicated. Comparison of existing positron sources leads to extrapolation to sources for future linear colliders

The Chandra Source Catalog : Automated Source Correlation

Science.gov (United States)

Hain, Roger; Evans, I. N.; Evans, J. D.; Glotfelty, K. J.; Anderson, C. S.; Bonaventura, N. R.; Chen, J. C.; Davis, J. E.; Doe, S. M.; Fabbiano, G.; Galle, E.; Gibbs, D. G.; Grier, J. D.; Hall, D. M.; Harbo, P. N.; He, X.; Houck, J. C.; Karovska, M.; Lauer, J.; McCollough, M. L.; McDowell, J. C.; Miller, J. B.; Mitschang, A. W.; Morgan, D. L.; Nichols, J. S.; Nowak, M. A.; Plummer, D. A.; Primini, F. A.; Refsdal, B. L.; Rots, A. H.; Siemiginowska, A. L.; Sundheim, B. A.; Tibbetts, M. S.; Van Stone, D. W.; Winkelman, S. L.; Zografou, P.

2009-01-01

Chandra Source Catalog (CSC) master source pipeline processing seeks to automatically detect sources and compute their properties. Since Chandra is a pointed mission and not a sky survey, different sky regions are observed for a different number of times at varying orientations, resolutions, and other heterogeneous conditions. While this provides an opportunity to collect data from a potentially large number of observing passes, it also creates challenges in determining the best way to combine different detection results for the most accurate characterization of the detected sources. The CSC master source pipeline correlates data from multiple observations by updating existing cataloged source information with new data from the same sky region as they become available. This process sometimes leads to relatively straightforward conclusions, such as when single sources from two observations are similar in size and position. Other observation results require more logic to combine, such as one observation finding a single, large source and another identifying multiple, smaller sources at the same position. We present examples of different overlapping source detections processed in the current version of the CSC master source pipeline. We explain how they are resolved into entries in the master source database, and examine the challenges of computing source properties for the same source detected multiple times. Future enhancements are also discussed. This work is supported by NASA contract NAS8-03060 (CXC).

EDITORIAL: Extreme Ultraviolet Light Sources for Semiconductor Manufacturing

Science.gov (United States)

Attwood, David

2004-12-01

The International Technology Roadmap for Semiconductors (ITRS) [1] provides industry expectations for high volume computer chip fabrication a decade into the future. It provides expectations to anticipated performance and requisite specifications. While the roadmap provides a collective projection of what international industry expects to produce, it does not specify the technology that will be employed. Indeed, there are generally several competing technologies for each two or three year step forward—known as `nodes'. Recent successful technologies have been based on KrF (248 nm), and now ArF (193 nm) lasers, combined with ultraviolet transmissive refractive optics, in what are known as step and scan exposure tools. Less fortunate technologies in the recent past have included soft x-ray proximity printing and, it appears, 157 nm wavelength F2 lasers. In combination with higher numerical aperture liquid emersion optics, 193 nm is expected to be used for the manufacture of leading edge chip performance for the coming five years. Beyond that, starting in about 2009, the technology to be employed is less clear. The leading candidate for the 2009 node is extreme ultraviolet (EUV) lithography, however this requires that several remaining challenges, including sufficient EUV source power, be overcome in a timely manner. This technology is based on multilayer coated reflective optics [2] and an EUV emitting plasma. Following Moore's Law [3] it is expected, for example, that at the 2009 `32 nm node' (printable patterns of 32 nm half-pitch), isolated lines with 18 nm width will be formed in resist (using threshold effects), and that these will be further narrowed to 13 nm in transfer to metalized electronic gates. These narrow features are expected to provide computer chips of 19 GHz clock frequency, with of the order of 1.5 billion transistors per chip [1]. This issue of Journal of Physics D: Applied Physics contains a cluster of eight papers addressing the critical

Recommended operating procedure number 56: Collection of gaseous grab samples from combustion sources for nitrous oxide measurement. Final report, Jan-Dec 91

International Nuclear Information System (INIS)

Ryan, J.V.; Karns, S.A.

1992-07-01

The document is a recommended operating procedure (ROP), prepared for use in research activities conducted by EPA's Air and Energy Engineering Research Laboratory (AEERL). The procedure applies to the collection of gaseous grab samples from fossil fuel combustion sources for subsequent analysis of nitrous oxide. The procedure details only the grab sampling methodology and associated equipment

Determining the sources of suspended sediment in a Mediterranean groundwater-dominated river: the Na Borges basin (Mallorca, Spain).

Science.gov (United States)

Estrany, Joan; Martinez-Carreras, Nuria

2013-04-01

Tracers have been acknowledged as a useful tool to identify sediment sources, based upon a variety of techniques and chemical and physical sediment properties. Sediment fingerprinting supports the notion that changes in sedimentation rates are not just related to increased/reduced erosion and transport in the same areas, but also to the establishment of different pathways increasing sediment connectivity. The Na Borges is a Mediterranean lowland agricultural river basin (319 km2) where traditional soil and water conservation practices have been applied over millennia to provide effective protection of cultivated land. During the twentieth century, industrialisation and pressure from tourism activities have increased urbanised surfaces, which have impacts on the processes that control streamflow. Within this context, source material sampling was focused in Na Borges on obtaining representative samples from potential sediment sources (comprised topsoil; i.e., 0-2 cm) susceptible to mobilisation by water and subsequent routing to the river channel network, while those representing channel bank sources were collected from actively eroding channel margins and ditches. Samples of road dust and of solids from sewage treatment plants were also collected. During two hydrological years (2004-2006), representative suspended sediment samples for use in source fingerprinting studies were collected at four flow gauging stations and at eight secondary sampling points using time-integrating sampling samplers. Likewise, representative bed-channel sediment samples were obtained using the resuspension approach at eight sampling points in the main stem of the Na Borges River. These deposits represent the fine sediment temporarily stored in the bed-channel and were also used for tracing source contributions. A total of 102 individual time-integrated sediment samples, 40 bulk samples and 48 bed-sediment samples were collected. Upon return to the laboratory, source material samples were

CADDIS Volume 2. Sources, Stressors and Responses: Physical Habitat - Detailed Conceptual Diagram

Science.gov (United States)

Introduction to the Physical Habitat module, when to list Physical Habitat as a candidate cause, ways to measure Physical Habitat, simple and detailed conceptual diagrams for Physical Habitat, Physical Habitat module references and literature reviews.

CADDIS Volume 2. Sources, Stressors and Responses: Physical Habitat - Simple Conceptual Diagram

Science.gov (United States)

Introduction to the Physical Habitat module, when to list Physical Habitat as a candidate cause, ways to measure Physical Habitat, simple and detailed conceptual diagrams for Physical Habitat, Physical Habitat module references and literature reviews.

High-power explosive magnetic energy sources for thermonuclear and physical applications (overview)

Energy Technology Data Exchange (ETDEWEB)

Chernyshev, V K [All-Russian Scientific Institute of Experimental Physics, Sarov (Russian Federation)

1997-12-31

High-power energy sources unavailable up to now are needed to carry out any one project on inertially confined controlled thermonuclear fusion (CTF). Considerable advances have been made in the area of explosive magnetic generators (EGG) as for their output characteristics (high power combined with high energy content). To develop the concept of magnetic cumulation proposed by A.D. Sakharov in 1951, two new approaches to increasing EMC fast operation by two orders (from tens of microseconds to tenths of microseconds) and increasing at the same time the current pulse amplitude by more than one order, were proposed at VNIIEF in the early sixties. The concept aimed at solving the CTF problem by target magnetic compression (MACO) under the effect of an fast-increasing field was proposed (1972) based on VNIIEF achievements, discussed (1976) at the USSR Academy of Sciences and published (1979). The key physical questions are analyzed, the problems to be solved are posed and the results achieved in the experiments with fast-operating high-power EMGs, fast-opening switches, transmitting lines and insulation systems are discussed here. The results obtained in experiments on liner acceleration as well as those on preliminary plasma magnetization and heating, carried out at the constructed EMGs, are discussed briefly. The conclusion is reached that the MACO system is the most suitable one to provide the ignition because the designing of high-power energy sources to be used in this system is practically complete and the concept itself does not need any intermediate transformations of one type of energy into another always accompanied by a decrease in total efficiency. (author). 4 tabs., 14 figs., 21 refs.

Fast temperature optimization of multi-source hyperthermia applicators with reduced-order modeling of 'virtual sources'

International Nuclear Information System (INIS)

Cheng, K-S; Stakhursky, Vadim; Craciunescu, Oana I; Stauffer, Paul; Dewhirst, Mark; Das, Shiva K

2008-01-01

The goal of this work is to build the foundation for facilitating real-time magnetic resonance image guided patient treatment for heating systems with a large number of physical sources (e.g. antennas). Achieving this goal requires knowledge of how the temperature distribution will be affected by changing each source individually, which requires time expenditure on the order of the square of the number of sources. To reduce computation time, we propose a model reduction approach that combines a smaller number of predefined source configurations (fewer than the number of actual sources) that are most likely to heat tumor. The source configurations consist of magnitude and phase source excitation values for each actual source and may be computed from a CT scan based plan or a simplified generic model of the corresponding patient anatomy. Each pre-calculated source configuration is considered a 'virtual source'. We assume that the actual best source settings can be represented effectively as weighted combinations of the virtual sources. In the context of optimization, each source configuration is treated equivalently to one physical source. This model reduction approach is tested on a patient upper-leg tumor model (with and without temperature-dependent perfusion), heated using a 140 MHz ten-antenna cylindrical mini-annular phased array. Numerical simulations demonstrate that using only a few pre-defined source configurations can achieve temperature distributions that are comparable to those from full optimizations using all physical sources. The method yields close to optimal temperature distributions when using source configurations determined from a simplified model of the tumor, even when tumor position is erroneously assumed to be ∼2.0 cm away from the actual position as often happens in practical clinical application of pre-treatment planning. The method also appears to be robust under conditions of changing, nonlinear, temperature-dependent perfusion. The

Path-integral in collective variables and its application to nuclear and hadron physics

International Nuclear Information System (INIS)

Pervushin, V.N.; Rajnkhardt, Kh.; Ehbert, D.

1979-01-01

The application of functional integrals to describe collective degrees of freedom in different fields of physics is reviewed for the period since 1965. The application of path integrals to the schematic model of nuclear multiparticle systems with pairing and particle-hole forces permits to lay strict foundations under the so called theory of nuclear field, which hitherto was proved euristically. The Abel gauge theory of interacting massless quarks and vector gluons is described. In this model radiative corrections cause spontaneous dynamic breaking of the chiral γ 5 -invariance. The application of functional integration to two-dimensional quantum chromodynamics is also analyzed. It is shown that the local quark-gluon theory can be transformed in an infinite-component nonpolynomial field theory in terms of colourless bound states - mesons. A modified perturbation theory appears in the form of 1/Nsub(c)-expansion (Nsub(c) - number of quarks), that is formally is very akin to the 1/Ω-expansion (Ωdegeneracy of single-particle states) in the theory of nuclear field

Physical, biological and optical oceanographic data collected from moored buoys in the Bering Strait from 08/16/2004 to 09/03/2007 (NODC Accession 0045300)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical, current meter, biological, and optical oceanographic data were collected in the Bering Strait from August 16, 2004 to September 3, 2007. These data were...

Zooplankton, physical, and other data collected by CHELAN in Bering Sea using CTD, bottle, net, and tide gauge casts from 18 July 1934 to 25 August 1934 (NODC Accession 9500110)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Zooplankton, physical, and other data were collected using CTD, bottle, net, and tide gauge casts from CHELAN in the Bering Sea. Data were collected from 18 July...

SAPHYR: the Swiss Atlas of PHYsical properties of Rocks

Science.gov (United States)

Wenning, Q. C.; Zappone, A. S.; Kissling, E.

2015-12-01

The Swiss Atlas of PHYsical properties of Rocks (SAPHYR) is a multi-year project, aiming to compile a comprehensive data set on physical properties of rocks exposed in Switzerland and surrounding areas. The ultimate goal of SAPHYR is to make these data accessible to an open and wide public, such as industrial, engineering, land and resource planning companies, as well as academic institutions. Since the early sixties worldwide geophysicists, petrologists, and engineers, focused their work on laboratory measurements of rocks physical properties, and their relations with microstructures, mineralogical compositions and other rock parameters, in the effort to constrain the geological interpretation of geophysical surveys. In combination with efforts to investigate deep structure of the continental crust by controlled source seismology, laboratories capable to reproduce pressure and temperature conditions to depth of 50km and more collected measurements of various parameters on a wide variety of rock types. In recent years, the increasing interest on non-traditional energy supply, (deep geothermal energy, shale gas) and CO2 storage renovated the interests in physical characterization of the deep underground. The idea to organize those laboratory data into a geographically referenced database (GIS) is supported by the Swiss Commission for Geophysics. The data refer to density and porosity, seismic, magnetic, thermal properties, permeability and electrical properties. An effort has been placed on collecting samples and measuring the physical properties of lithologies that are poorly documented in literature. The phase of laboratory measurements is still in progress. At present SAPHYR focuses towards developing a 3-D physical properties model of the Swiss subsurface, using the structure of the exposed geology, boreholes data and seismic surveys, combined with lab determined pressure and temperature derivatives. An early version of the final product is presented here.

The Quark-Gluon Plasma Collective Dynamics and Hard Thermal Loops

CERN Document Server

Blaizot, J P; Blaizot, Jean-Paul; Iancu, Edmond

2002-01-01

We present a unified description of the high temperature phase of QCD, the so-called quark-gluon plasma, in a regime where the effective gauge coupling $g$ is sufficiently small to allow for weak coupling calculations. The main focuss is the construction of the effective theory for the collective excitations which develop at a typical scale $gT$, which is well separated from the typical energy of single particle excitations which is the temperature $T$. We show that the plasma particles provide a source for long wavelength oscillations of average fields which carry the quantum numbers of the plasma constituents, the quarks and the gluons. To leading order in $g$, the plasma particles obey simple gauge-covariant kinetic equations, whose derivation from the general Dyson-Schwinger equations is outlined. As a by-product, the ``hard thermal loops'' emerge naturally in a physically transparent framework. We show that the collective excitations can be described in terms of classical fields, and develop for these a ...

Vacuum nanoelectronic devices novel electron sources and applications

CERN Document Server

Evtukh, Anatoliy; Yilmazoglu, Oktay; Mimura, Hidenori; Pavlidis, Dimitris

2015-01-01

Introducing up-to-date coverage of research in electron field emission from nanostructures, Vacuum Nanoelectronic Devices outlines the physics of quantum nanostructures, basic principles of electron field emission, and vacuum nanoelectronic devices operation, and offers as insight state-of-the-art and future researches and developments.  This book also evaluates the results of research and development of novel quantum electron sources that will determine the future development of vacuum nanoelectronics. Further to this, the influence of quantum mechanical effects on high frequency vacuum nanoelectronic devices is also assessed. Key features: In-depth description and analysis of the fundamentals of Quantum Electron effects in novel electron sources. Comprehensive and up-to-date summary of the physics and technologies for THz sources for students of physical and engineering specialties and electronics engineers. Unique coverage of quantum physical results for electron-field emission and novel electron sourc...

Conditioning of low level radioactive wastes, spent radiation sources and their transport at the interim storage building of the Institute of Nuclear Physics in Albania

International Nuclear Information System (INIS)

Qafmolla, L.

2000-01-01

Aspects of treatment and management of radioactive wastes resulting from the use of radiation sources and radioisotopes in research, medicine and industry, are described. The methods applied for the conditioning of low-level radioactive wastes and spent radiation sources are simple. Solid radioactive wastes with low-level activity, after accumulation, minimization, segregation and measurement, are burned or compressed in a simple compactor of the PGS type. Spent radiation sources are placed into 200 l drums, are cemented and conditioned. Conditioned drums from the Radiation Protection Division of the Institute of Nuclear Physics (INP), which is the responsible Institution for the treatment and management of radioactive wastes in Albania, are transported to the interim storage building of the Institute of Nuclear Physics in Tirana. Work to construct a new building for treatment and management of radioactive wastes and spent radiation sources within the territory of INP is underway. Funds have been allocated accordingly: based on the Law No. 8025 of 25.11.1995, it is the Albanian Government's responsibility to finance activities concerned with the treatment and management of radioactive wastes generating from the use of ionizing radiation in science, medicine and industry in the country. (author)

Ultrasonic physics

CERN Document Server

Richardson, E G

1962-01-01

Ultrasonic Physics, Second Edition, provides an introduction to the fundamental principles of ultrasonic physics. The book opens with a discussion of the sources of ultrasound. This is followed by separate chapters on the properties and detection of ultrasonic radiation; measurement of propagation constants, i.e., the velocity and absorption, of ultrasound; ultrasound propagation in gases, liquids, and solids; and ultrasound propagation in aerosols, suspensions, and emulsions. The final chapter covers miscellaneous physical and physico-chemical actions, including dispersion and coagulation of

Perspectives in theoretical physics the collected papers of E. M. Lifshitz

CERN Document Server

Sykes, J B; Pitaevskii, L P

1992-01-01

Evgenii Mikhailovich Lifshitz is perhaps best known for his long association with his mentor Lev D Landau, with whom he co-wrote the classic Course of Theoretical Physics, but he was a noted and respected Soviet physicist in his own right. Born in the Ukraine to a scientific family, his long and distinguished career will be remembered for three things - his collaboration with Landau on the internationally acclaimed Course of Theoretical Physics, his work as editor of the Journal of Experimental and Theoretical Physics, and his scientific papers. As well as his work with La

77 FR 76059 - Agency Information Collection Activities: Proposed Collection; Comment Request

Science.gov (United States)

2012-12-26

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Substance Abuse and Mental Health Services Administration... proposed collections of information, the Substance Abuse and Mental Health Services Administration (SAMHSA... support of combat operations (e.g. Iraq or Afghanistan) (b) Was physically injured during combat...

Radiation Sources Working Group Summary Report

International Nuclear Information System (INIS)

Fazio, Michael V.

1999-01-01

The Radiation Sources Working Group addressed advanced concepts for the generation of RF energy to power advanced accelerators. The focus of the working group included advanced sources and technologies above 17 GHz. The topics discussed included RF sources above 17 GHz, pulse compression techniques to achieve extreme peak power levels, component technology, technology limitations and physical limits, and other advanced concepts. RF sources included gyroklystrons, magnicons, free-electron masers, two beam accelerators, and gyroharmonic and traveling wave devices. Technology components discussed included advanced cathodes and electron guns, high temperature superconductors for producing magnetic fields, RF breakdown physics and mitigarion, and phenomena that impact source design such as fatigue in resonant structures due to pulsed RF heating. New approaches for RF source diagnostics located internal to the source were discussed for detecting plasma and beam phenomena existing in high energy density electrodynamic systems in order to help elucidate the reasons for performance limitations

Sources of variation in habitual physical activity of children and adolescents

DEFF Research Database (Denmark)

Kristensen, Peter Lund; Korsholm, L; Møller, N C

2007-01-01

The present study examined the influence of gender, maturity state, seasonality, type of measurement day and socioeconomic status (SES) on habitual physical activity in 8-10-year-old children and 14-16-year-old adolescents (n=1318). Physical activity was assessed objectively by accelerometry....... The results showed a significant effect of the type of measurement day on physical activity with a general pattern of lower activity levels in weekends compared with weekdays. Furthermore, higher physical activity levels were observed during the months of spring/summer compared with the months of autumn....../winter for the 8-10-year-olds, whereas no significant effect of months was observed for the 14-16-year-olds, possibly due to exam preparations and lack of physical activity registration during the months of summer for this cohort. SES was unrelated to physical activity in the 8-10-year-olds, whereas an inverse...

Single photon sources with single semiconductor quantum dots

Science.gov (United States)

Shan, Guang-Cun; Yin, Zhang-Qi; Shek, Chan Hung; Huang, Wei

2014-04-01

In this contribution, we briefly recall the basic concepts of quantum optics and properties of semiconductor quantum dot (QD) which are necessary to the understanding of the physics of single-photon generation with single QDs. Firstly, we address the theory of quantum emitter-cavity system, the fluorescence and optical properties of semiconductor QDs, and the photon statistics as well as optical properties of the QDs. We then review the localization of single semiconductor QDs in quantum confined optical microcavity systems to achieve their overall optical properties and performances in terms of strong coupling regime, efficiency, directionality, and polarization control. Furthermore, we will discuss the recent progress on the fabrication of single photon sources, and various approaches for embedding single QDs into microcavities or photonic crystal nanocavities and show how to extend the wavelength range. We focus in particular on new generations of electrically driven QD single photon source leading to high repetition rates, strong coupling regime, and high collection efficiencies at elevated temperature operation. Besides, new developments of room temperature single photon emission in the strong coupling regime are reviewed. The generation of indistinguishable photons and remaining challenges for practical single-photon sources are also discussed.

Simulation of 10 A electron-beam formation and collection for a high current electron-beam ion source

International Nuclear Information System (INIS)

Kponou, A.; Beebe, E.; Pikin, A.; Kuznetsov, G.; Batazova, M.; Tiunov, M.

1998-01-01

Presented is a report on the development of an electron-beam ion source (EBIS) for the relativistic heavy ion collider at Brookhaven National Laboratory (BNL) which requires operating with a 10 A electron beam. This is approximately an order of magnitude higher current than in any existing EBIS device. A test stand is presently being designed and constructed where EBIS components will be tested. It will be reported in a separate paper at this conference. The design of the 10 A electron gun, drift tubes, and electron collector requires extensive computer simulations. Calculations have been performed at Novosibirsk and BNL using two different programs, SAM and EGUN. Results of these simulations will be presented. copyright 1998 American Institute of Physics

Physical Activity Correlates for Children with Autism Spectrum Disorders in Middle School Physical Education

Science.gov (United States)

Pan, Chien-Yu; Tsai, Chia-Liang; Hsieh, Kai-Wen

2011-01-01

This study examined potential correlates that might influence physical activity (PA) of adolescents with autism spectrum disorders (ASD) in physical education. Students with (n = 19) and without (n = 76) ASD wore an accelerometer during physical education. Data were collected in 38 physical education lessons. The results showed that (a) students…

Contemporary mathematical physics

CERN Document Server

Dobrushin, R L; Shubin, M A; Vershik, Anatoly M

1996-01-01

This first of a two-volume collection is a celebration of the scientific heritage of F. A. Berezin (1931-1980). Before his untimely death, Berezin had an important influence on physics and mathematics, discovering new ideas in mathematical physics, representation theory, analysis, geometry, and other areas of mathematics. His crowning achievements were the introduction of a new notion of deformation quantization, and Grassmannian analysis ("supermathematics"). Collected here are papers by his many of his colleagues and others who worked in related areas, representing a wide spectrum of topics

Orbit Display's Use of the Physics Application Framework

International Nuclear Information System (INIS)

Zelazny, Michael

2009-01-01

At the SLAC National Accelerator Laboratory (SLAC) the Controls Department (CD) is developing a physics application framework based on the Java(tm) programming language developed by Sun Microsystems. This paper will discuss the first application developed using this approach: a new Orbit Display. The software is being developed by several individuals in reusable Java packages. It relies on the Experimental Physics and Industrial Control System (EPICS) toolkit for data collection and XAL - A Java based Hierarchy for Application Programming for model parameters. The Orbit Display tracks and displays electron paths through the Linac Coherent Light Source (LCLS) in both a graphical, beam line plot, and tabular format. It contains many features that may be unique to SLAC and is meant to be used both in the control room and by individuals in their offices or at home. Unique features include BSA Beam Synchronous Acquisition (BSA), Orbit Fitting, and Buffered Acquisition.

Underway physical and meteorological data collected aboard NOAA Ship TOWNSEND CROMWELL in the North Pacific from 2001-06-11 to 2001-11-20 (NODC Accession 0000705)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — These data include physical oceanographic (surface water temperature and salinity) and meteorological observations, which were collected from June 11 to November 20,...

The first collection of spacecraft-associated microorganisms: a public source for extremotolerant microorganisms from spacecraft assembly clean rooms.

Science.gov (United States)

Moissl-Eichinger, Christine; Rettberg, Petra; Pukall, Rüdiger

2012-11-01

For several reasons, spacecraft are constructed in so-called clean rooms. Particles could affect the function of spacecraft instruments, and for missions under planetary protection limitations, the biological contamination has to be restricted as much as possible. The proper maintenance of clean rooms includes, for instance, constant control of humidity and temperature, air filtering, and cleaning (disinfection) of the surfaces. The combination of these conditions creates an artificial, extreme biotope for microbial survival specialists: spore formers, autotrophs, multi-resistant, facultative, or even strictly anaerobic microorganisms have been detected in clean room habitats. Based on a diversity study of European and South-American spacecraft assembly clean rooms, the European Space Agency (ESA) has initialized and funded the creation of a public library of microbial isolates. Isolates from three different European clean rooms, as well as from the final assembly and launch facility in Kourou (French Guiana), have been phylogenetically analyzed and were lyophilized for long-term storage at the German Culture Collection facilities in Brunswick, Germany (Leibniz-Institut DSMZ-Deutsche Sammlung von Mikroorganismen und Zellkulturen). The isolates were obtained by either following the standard protocol for the determination of bioburden on, and around, spacecraft or the use of alternative cultivation strategies. Currently, the database contains 298 bacterial strains. Fifty-nine strains are Gram-negative microorganisms, belonging to the α-, β- and γ-Proteobacteria. Representatives of the Gram-positive phyla Actinobacteria, Bacteroidetes/Chlorobi, and Firmicutes were subjected to the collection. Ninety-four isolates (21 different species) of the genus Bacillus were included in the ESA collection. This public collection of extremotolerant microbes, which are adapted to a complicated artificial biotope, provides a wonderful source for industry and research focused on

Neutrino physics at the spallation neutron source. Pt. 2

International Nuclear Information System (INIS)

Gabriel, T.A.; Lillie, R.A.; Bishop, B.L.; Wilczynski, J.; Zeitnitz, B.

1981-06-01

The shielding and detector analysis associated with a contemplated low energy (approx. equal to10 to 50 MeV) neutrino experiment at a spallation neutron source are presented and discussed. This analysis includes neutrino production and interaction rates, time dependence of the neutrino pulse, shielding considerations for neutrons coming directly from the spallation source and those which are scattered from other experimental areas, shielding considerations for galactic sources especially muons and finally detector responses to neutrino and background radiations. In general for a 1 mA (200 ns/pulse, 100 Hz), 1.1 GeV proton beam incident on a lead target surrounded by a moderator system, approximately 8 m of iron are required to reduce the background so that the event rate in the detector systems is approx. [de

[Source data management in clinical researches].

Science.gov (United States)

Ho, Effie; Yao, Chen; Zhang, Zi-bao; Liu, Yu-xiu

2015-11-01

Source data and its source documents are the foundation of clinical research. Proper source data management plays an essential role for compliance with regulatory and GCP requirements. Both paper and electronic source data co-exist in China. Due to the increasing use of electronic technology in pharmaceutical and health care industry, electronic data source becomes an upcoming trend with clear advantages. To face new opportunities and to ensure data integrity, quality and traceability from source data to regulatory submission, this document demonstrates important concepts, principles and best practices during managing source data. It includes but not limited to: (1) important concepts of source data (e.g., source data originator, source data elements, source data identifier for audit trail, etc.); (2) various modalities of source data collection in paper and electronic methods (e.g., paper CRF, EDC, Patient Report Outcomes/eCOA, etc.); (3) seven main principles recommended in the aspect of data collection, traceability, quality standards, access control, quality control, certified copy and security during source data management; (4) a life cycle from source data creation to obsolete is used as an example to illustrate consideration and implementation of source data management.

Z-pinches as intense x-ray sources for high energy density physics application

International Nuclear Information System (INIS)

Matzen, M.K.

1997-01-01

Fast z-pinch implosions can convert more than 10% of the stored electrical energy in a pulsed-power accelerator into x rays. These x rays are produced when an imploding cylindrical plasma, driven by the magnetic field pressure associated with very large axial currents, stagnates upon the cylindrical axis of symmetry. On the Saturn pulsed-power accelerator at Sandia National Laboratories, for example, currents of 6 to 8 MA with a risetime of less than 50 ns are driven through cylindrically-symmetric loads, producing implosions velocities as high as 100 cm/μs and x-ray energies as high as 500 kJ. The keV component of the resulting x-ray spectrum has been used for many years 8 a radiation source for material response studies. Alternatively, the x-ray output can be thermalized into a near-Planckian x-ray source by containing it within a large cylindrical radiation case. These large volume, long-lived radiation sources have recently been used for ICF-relevant ablator physics experiments as well as astrophysical opacity and radiation-material interaction experiments. Hydromagnetic Rayleigh-Taylor instabilities and cylindrical load symmetry are critical, limiting factors in determining the assembled plasma densities and temperatures, and thus in the x-ray pulse widths that can be produced on these accelerators. In recent experiments on the Saturn accelerator, these implosion nonuniformities have been minimized by using uniform-fill gas puff loads or by using wire arrays with as many a 192 wires. These techniques produced significant improvements in the pinched plasma quality, Zn reproducibility, and x-ray output power. X-ray pulse widths of less than 5 ns and peak powers of 75±10 TW have been achieved with arrays of 120 tungsten wires. These powers represent greater than a factor of three in power amplification over the electrical power of the Saturn n accelerator, and are a record for x-ray powers in the laboratory

Astronomy and astrophysics of galactic X-ray binaries: from the nature of the X-ray sources to the physics of accretion processes

International Nuclear Information System (INIS)

Rodriguez, Jerome

2010-01-01

In this HDR (Accreditation to supervise research) report, the author proposes an overview of his research works in the field of accretion of X-ray binaries. After a presentation of X-ray binaries, neutron stars and black holes, micro-quasars, and of the main issues regarding X-ray binaries, the author presents and comments his activities in X-ray astronomy and gamma-ray astronomy (the INTEGRAL observatory, the discovery of new sources of X and gamma radiation, studies of new sources at different wavelengths). The second part addresses the understanding of source accretion: phenomenological studies in astronomy, relationships between accretion and ejection. The third part presents and comments several studies of the physics of phenomena related to matter accretion and ejection. (author) [fr

Underway physical and meteorological data collected aboard NOAA Ship ALBATROSS IV in the Northwest Atlantic from 2007-05-08 to 2007-06-11 (NODC Accession 0020395)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Underway physical and meteorological data were collected using thermosalinograph and meteorological sensors from NOAA Ship ALBATROSS IV in the NW Atlantic Ocean from...

Developments of ECR Sources and Associated Equipment

International Nuclear Information System (INIS)

Bieth, C.; Kantas, S.; Sortais, P.

2002-01-01

PANTECHNIK s.a. has improved and created ECR using room temperature coils, superconducting coils at 30K or permanent magnets ECR. Some of these sources are devoted to particular applications: ion implantation, nuclear and atomic physic, Proton and Hadrontherapy, radioactive beam. Stability and reproducibility have been particularly 1.0 Operational Improvements 1.1 High charge state for nuclear physics, atomic physic and RIB beam The HYPERNANOGAN [1] source (fig1) has been modified to run at 18GHz, and improved at 14.5GHz. The XENON spectrum (fig2) at 14.5GHz shows a Beam current of 3 μAe; for the charge state 30 + . At 18 GHz, the preliminary results indicate an improvement of 18% for Ar 8+ and 50% on Ar 9+ . In the atomic physics field our sources have been used to study the effect of extremely charged ions on a semiconductor surface ( Coulomb explosion)

Physical conditions in the central region, and the nature of the engine

International Nuclear Information System (INIS)

Cavaliere, A.

1983-01-01

The phenomena associated with Active Galactic Nuclei raise three main astrophysical problems: the nature of the primary source of energy; the physical conditions within the radiation source; the nature of the population evolution over cosmological time-scales. The author outlines the links between these problems. The Prime Mover is very likely to be a converter of gravitational energy in a very compact mass configuration. The associated radiation source, if it is also very compact, is so efficient and loss-dominated as to require specific conditions for the power transport and supply to the radiating particles: collisionless, effected by electromagnetic fields coherent on scales collective or macroscopic, to the point of producing at times anisotropic bulk motions. Very compact Prime Movers working at high regimes need also a compact mass supply; the output from these compound engines undergoes a characteristic change that accounts for the type of population evolutions of the associated sources. (orig.)

The new physics

International Nuclear Information System (INIS)

Davies, P.

1993-01-01

A collection of articles, written by renowned scientists, covering the various fields of the ''new physics'', is presented. The titles are: the new Physics: a synthesis; the renaissance of general relativity; the inflationary universe; the edge of space time; quantum gravity; the new astrophysics; condensed matter physics in less than three dimensions; critical point phenomena: universal physics at large length scales; low temperature physics, superconductivity and superfluidity; quantum optics; physics of far-from-equilibrium systems and self-organization; what is chaos, that we should be mindful of it. Conceptual foundations of quantum mechanics; the quark structure of matter; grand unified theories; effective quantum field theories; gauge theories in particle physics; overview of particle physics

Thesaurus-based search in large heterogeneous collections

NARCIS (Netherlands)

Wielemaker, J.; Hildebrand, M.; van Ossenbruggen, J.; Schreiber, G.

2008-01-01

In cultural heritage, large virtual collections are coming into existence. Such collections contain heterogeneous sets of metadata and vocabulary concepts, originating from multiple sources. In the context of the E-Culture demonstrator we have shown earlier that such virtual collections can be

Polarized source upgrading

International Nuclear Information System (INIS)

Clegg, T.B.; Rummel, R.L.; Carter, E.P.; Westerfeldt, C.R.; Lovette, A.W.; Edwards, S.E.

1985-01-01

The decision was made this past year to move the Lamb-shift polarized ion source which was first installed in the laboratory in 1970. The motivation was the need to improve the flexibility of spin-axis orientation by installing the ion source with a new Wien-filter spin precessor which is capable of rotating physically about the beam axis. The move of the polarized source was accomplished in approximately two months, with the accelerator being turned off for experiments during approximately four weeks of this time. The occasion of the move provided the opportunity to rewire completely the entire polarized ion source frame and to rebuild approximately half of the electronic chassis on the source. The result is an ion source which is now logically wired and carefully documented. Beams obtained from the source are much more stable than those previously available

Sources for charged particles

International Nuclear Information System (INIS)

Arianer, J.

1997-01-01

This document is a basic course on charged particle sources for post-graduate students and thematic schools on large facilities and accelerator physics. A simple but precise description of the creation and the emission of charged particles is presented. This course relies on every year upgraded reference documents. Following relevant topics are considered: electronic emission processes, technological and practical considerations on electron guns, positron sources, production of neutral atoms, ionization, plasma and discharge, different types of positive and negative ion sources, polarized particle sources, materials for the construction of ion sources, low energy beam production and transport. (N.T.)

Seismic data collection from water gun and industrial background sources in the Chicago Sanitary and Ship Canal area, Illinois, 2011

Science.gov (United States)

Morrow, William S.; Carpenter, Phillip J.; Adams, Ryan F.

2015-01-01

The water gun is a tool adapted from deep marine geophysical surveys that is being evaluated for use as an acoustic fish deterrent to control the movement of invasive marine species. The water gun creates a seismic signal by using a compressed air discharge to move a piston rapidly within the water, resulting in an implosion. This energy pulse may be able to modify fish behavior or destroy marine life, such as the Asian carp, at some distance. The effects of this energy pulse on structures in the Chicago Sanitary and Ship Canal (CSSC), such as canal walls, shore lines, and lock structures, are not known. The potential effects of the use of a water gun on structures was identified as a concern in the CSSC and was assessed relative to existing background sources during this study. During September 2011, two water guns with piston sizes of 80 and 343 cubic inches, respectively, were tested in the CSSC at varying pressures and distances from a canal wall consisting of dolomite and dolomite setblock. Seismic data were collected during these water gun firings using geophones on land, in boreholes, and at the canal wall interface. Data were collected at varying depths in the canal water using hydrophones. Seismic data were also collected during the occurrences of barge traffic, railroad traffic located near the electric fish barrier in Lemont, and coal-loading operations at a coal power plant near the electric fish barrier. In general, energy produced by barge and railroad sources was less than energy created by the water gun. Energy levels produced by coal-loading operations at least 200 feet from geophones were approximately four times lower than energy levels measured during water gun operations.

Excellence in Physics Education Award Talk: Curriculum Development for Active Learning using Real Time Graphing and Data Collection Tools

Science.gov (United States)

Laws, Priscilla

2010-02-01

In June 1986 Ronald Thornton (at the Tufts University Center for Science and Mathematics Teaching) and Priscilla Laws (at Dickinson College) applied independently for grants to develop curricular materials based on both the outcomes of Physics Education Research and the use of Microcomputer Based Laboratory Tools (MBL) developed by Robert Tinker, Ron Thornton and others at Technical Education Research Centers (TERC). Thornton proposed to develop a series of Tools for Scientific Thinking (TST) laboratory exercises to address known learning difficulties using carefully sequenced MBL observations. These TST laboratories were to be beta tested at several types of institutions. Laws proposed to develop a Workshop Physics Activity Guide for a 2 semester calculus-based introductory course sequence centering on MBL-based guided inquiry. Workshop Physics was to be designed to replace traditional lectures and separate labs in relatively small classes and was to be tested at Dickinson College. In September 1986 a project officer at the Fund for Post-Secondary Education (FIPSE) awarded grants to Laws and Thornton provided that they would collaborate. David Sokoloff (at the University of Oregon) joined Thornton to develop and test the TST laboratories. This talk will describe the 23 year collaboration between Thornton, Laws, and Sokoloff that led to the development of a suite of Activity Based Physics curricular materials, new apparatus and enhanced computer tools for real time graphing, data collection and mathematical modeling. The Suite includes TST Labs, the Workshop Physics Activity Guide, RealTime Physics Laboratory Modules, and a series of Interactive Lecture Demonstrations. A textbook and a guide to using the Suite were also developed. The vital importance of obtaining continued grant support, doing continuous research on student learning, collaborating with instructors at other institutions, and forging relationships with vendors and publishers will be described. )

Kinetic parameters for source driven systems

International Nuclear Information System (INIS)

Dulla, S.; Ravetto, P.; Carta, M.; D'Angelo, A.

2006-01-01

The definition of the characteristic kinetic parameters of a subcritical source-driven system constitutes an interesting problem in reactor physics with important consequences for practical applications. Consistent and physically meaningful values of the parameters allow to obtain accurate results from kinetic simulation tools and to correctly interpret kinetic experiments. For subcritical systems a preliminary problem arises for the adoption of a suitable weighting function to be used in the projection procedure to derive a point model. The present work illustrates a consistent factorization-projection procedure which leads to the definition of the kinetic parameters in a straightforward manner. The reactivity term is introduced coherently with the generalized perturbation theory applied to the source multiplication factor ks, which is thus given a physical role in the kinetic model. The effective prompt lifetime is introduced on the assumption that a neutron generation can be initiated by both the fission process and the source emission. Results are presented for simplified configurations to fully comprehend the physical features and for a more complicated highly decoupled system treated in transport theory. (authors)

Weather is not significantly correlated with destination-specific transport-related physical activity among adults: A large-scale temporally matched analysis.

Science.gov (United States)

Durand, Casey P; Zhang, Kai; Salvo, Deborah

2017-08-01

Weather is an element of the natural environment that could have a significant effect on physical activity. Existing research, however, indicates only modest correlations between measures of weather and physical activity. This prior work has been limited by a failure to use time-matched weather and physical activity data, or has not adequately examined the different domains of physical activity (transport, leisure, occupational, etc.). Our objective was to identify the correlation between weather variables and destination-specific transport-related physical activity in adults. Data were sourced from the California Household Travel Survey, collected in 2012-3. Weather variables included: relative humidity, temperature, wind speed, and precipitation. Transport-related physical activity (walking) was sourced from participant-recorded travel diaries. Three-part hurdle models were used to analyze the data. Results indicate statistically or substantively insignificant correlations between the weather variables and transport-related physical activity for all destination types. These results provide the strongest evidence to date that transport-related physical activity may occur relatively independently of weather conditions. The knowledge that weather conditions do not seem to be a significant barrier to this domain of activity may potentially expand the universe of geographic locations that are amenable to environmental and programmatic interventions to increase transport-related walking. Copyright © 2017 Elsevier Inc. All rights reserved.

Pulsed spallation Neutron Sources

International Nuclear Information System (INIS)

Carpenter, J.M.

1994-01-01

This paper reviews the early history of pulsed spallation neutron source development at Argonne and provides an overview of existing sources world wide. A number of proposals for machines more powerful than currently exist are under development, which are briefly described. The author reviews the status of the Intense Pulsed Neutron Source, its instrumentation, and its user program, and provides a few examples of applications in fundamental condensed matter physics, materials science and technology

Pulsed spallation neutron sources

International Nuclear Information System (INIS)

Carpenter, J.M.

1996-01-01

This paper reviews the early history of pulsed spallation neutron source development ar Argonne and provides an overview of existing sources world wide. A number of proposals for machines more powerful than currently exist are under development, which are briefly described. The author reviews the status of the Intense Pulsed Neutron Source, its instrumentation, and its user program, and provide a few examples of applications in fundamental condensed matter physics, materials science and technology

75 FR 31790 - Agency Information Collection Activities: Proposed Collection; Comment Request

Science.gov (United States)

2010-06-04

... the Management of Urinary Incontinence in Older Adults, Physical Activity in Older Adults, Fall Risk Management, and Osteoporosis Testing in Older Women HEDIS[supreg] measures. The collection of Medicare HOS is... document identifier or OMB control number. To be assured consideration, comments and recommendations must...

Physical and chemical data collected using bottle casts from the GENERAL SAN MARTIN in the Scotia Sea and Weddell Sea from 14 December 1963 to 11 January 1964 (NODC Accession 0000791)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical and chemical data were collected using bottle casts in the Scotia Sea and Weddell Sea from the GENERAL SAN MARTIN. Data were collected from 14 December 1963...

GANIL Workshop on Ion Sources

International Nuclear Information System (INIS)

Leroy, Renan

1999-01-01

The proceedings of the GANIL Workshop on Ion Sources held at GANIL - Caen on 18-19 March 1999 contains 13 papers aiming at improving the old source operation and developing new types of sources for nuclear research and studies of ion physics. A number of reports are devoted to applications like surface treatment, ion implantation or fusion injection. The 1+→n+ transformation, charged particle transport in ECR sources, addition of cesium and xenon in negative ion sources and other basic issues in ion sources are also addressed

78 FR 45540 - Agency Information Collection Activities: Proposed Collection: Public Comment Request

Science.gov (United States)

2013-07-29

... Northern Mariana Islands, the Virgin Islands, American Samoa, Guam, the U.S. Virgin Islands, the Federated... train personnel and to be able to respond to a collection of information; to search data sources; to...

78 FR 45931 - Agency Information Collection Activities; Proposed Collection; Public Comment Request

Science.gov (United States)

2013-07-30

..., the Virgin Islands, American Samoa, Guam, the U.S. Virgin Islands, the Federated States of Micronesia... train personnel and to be able to respond to a collection of information; to search data sources; to...

New physics with beauty

Indian Academy of Sciences (India)

We review the effects of new physics on CP asymmetries and decays of mesons. Possible sources and corresponding signals for new physics are studied briefly. We discuss how the decay mode → sℓℓ$ (and → * ℓℓ) will enable us to understand the nature of new physics. We also examine the possibility of truly ...

The ECR heavy-ion source for ATLAS

International Nuclear Information System (INIS)

Pardo, R.C.; Billquist, P.J.

1989-01-01

The ATLAS PII-ECR ion source is the first ECR ion source to be designed for operation in a high voltage platform. The source system is required to provide beams of heavy ions with a velocity of 0.01c for subsequent acceleration by the superconducting ATLAS Positive Ion Injector Linac. At present, the ability of the system to provide high charge state ions with velocities up to .01c is probably unique and as such has generated significant interest in the atomic physics community. A beamline for atomic physics has been installed and is now in use. The source began operation in October, 1987. The source capabilities and operating experiences to date will be discussed. 6 refs., 3 figs., 3 tabs

Fission-product source terms

International Nuclear Information System (INIS)

Lorenz, R.A.

1981-01-01

This presentation consists of a review of fission-product source terms for light water reactor (LWR) fuel. A source term is the quantity of fission products released under specified conditions that can be used to calculate the consequences of the release. The source term usually defines release from breached fuel-rod cladding but could also describe release from the primary coolant system, the reactor containment shell, or the site boundary. The source term would be different for each locality, and the chemical and physical forms of the fission products could also differ

Intense fusion neutron sources

International Nuclear Information System (INIS)

Kuteev, B. V.; Goncharov, P. R.; Sergeev, V. Yu.; Khripunov, V. I.

2010-01-01

The review describes physical principles underlying efficient production of free neutrons, up-to-date possibilities and prospects of creating fission and fusion neutron sources with intensities of 10 15 -10 21 neutrons/s, and schemes of production and application of neutrons in fusion-fission hybrid systems. The physical processes and parameters of high-temperature plasmas are considered at which optimal conditions for producing the largest number of fusion neutrons in systems with magnetic and inertial plasma confinement are achieved. The proposed plasma methods for neutron production are compared with other methods based on fusion reactions in nonplasma media, fission reactions, spallation, and muon catalysis. At present, intense neutron fluxes are mainly used in nanotechnology, biotechnology, material science, and military and fundamental research. In the near future (10-20 years), it will be possible to apply high-power neutron sources in fusion-fission hybrid systems for producing hydrogen, electric power, and technological heat, as well as for manufacturing synthetic nuclear fuel and closing the nuclear fuel cycle. Neutron sources with intensities approaching 10 20 neutrons/s may radically change the structure of power industry and considerably influence the fundamental and applied science and innovation technologies. Along with utilizing the energy produced in fusion reactions, the achievement of such high neutron intensities may stimulate wide application of subcritical fast nuclear reactors controlled by neutron sources. Superpower neutron sources will allow one to solve many problems of neutron diagnostics, monitor nano-and biological objects, and carry out radiation testing and modification of volumetric properties of materials at the industrial level. Such sources will considerably (up to 100 times) improve the accuracy of neutron physics experiments and will provide a better understanding of the structure of matter, including that of the neutron itself.

Intense fusion neutron sources

Science.gov (United States)

Kuteev, B. V.; Goncharov, P. R.; Sergeev, V. Yu.; Khripunov, V. I.

2010-04-01

The review describes physical principles underlying efficient production of free neutrons, up-to-date possibilities and prospects of creating fission and fusion neutron sources with intensities of 1015-1021 neutrons/s, and schemes of production and application of neutrons in fusion-fission hybrid systems. The physical processes and parameters of high-temperature plasmas are considered at which optimal conditions for producing the largest number of fusion neutrons in systems with magnetic and inertial plasma confinement are achieved. The proposed plasma methods for neutron production are compared with other methods based on fusion reactions in nonplasma media, fission reactions, spallation, and muon catalysis. At present, intense neutron fluxes are mainly used in nanotechnology, biotechnology, material science, and military and fundamental research. In the near future (10-20 years), it will be possible to apply high-power neutron sources in fusion-fission hybrid systems for producing hydrogen, electric power, and technological heat, as well as for manufacturing synthetic nuclear fuel and closing the nuclear fuel cycle. Neutron sources with intensities approaching 1020 neutrons/s may radically change the structure of power industry and considerably influence the fundamental and applied science and innovation technologies. Along with utilizing the energy produced in fusion reactions, the achievement of such high neutron intensities may stimulate wide application of subcritical fast nuclear reactors controlled by neutron sources. Superpower neutron sources will allow one to solve many problems of neutron diagnostics, monitor nano-and biological objects, and carry out radiation testing and modification of volumetric properties of materials at the industrial level. Such sources will considerably (up to 100 times) improve the accuracy of neutron physics experiments and will provide a better understanding of the structure of matter, including that of the neutron itself.

Metals and metalloids in precipitation collected during CHINARE campaign from Shanghai, China, to Zhongshan Station, Antarctica: Spatial variability and source identification

Science.gov (United States)

Shi, G.; Teng, J.; Ma, H.; Li, Y.; Sun, B.

2015-06-01

Metals and metalloids in continental precipitation have been widely observed, but the data over open oceans are still very limited. Investigation of metals and metalloids in marine precipitation is of great significance to understand global transport of these elements in the atmosphere and their input fluxes to the oceans. So shipboard sampling of precipitation was conducted during a Chinese National Antarctic Research Expedition campaign from Shanghai, China, to Zhongshan Station, East Antarctica, and 22 samples (including 17 rainfall and 5 snowfall events) were collected and analyzed for concentrations of Pb, Ni, Cr, Cu, Co, Hg, As, Cd, Sb, Se, Zn, Mn, and Ti. Results show that concentrations of both metals and metalloids vary considerably along the cruise, with higher concentrations at coastal sites and lower values on the south Indian Ocean. Although only soluble fractions were determined for elements, concentrations in this study are generally comparable to the reported values of marine rain. Enrichment factor analysis shows that most of metals and metalloids are enriched versus crustal sources, even in the samples collected from remote south Indian Ocean. In addition, metals and metalloids in precipitation are also very enriched above sea-salt abundance, indicating that impacts of sea-salt aerosols on their concentrations are negligible. Main sources of metals and metalloids were explored with the aid of multivariate statistical analyses. The results show that human emissions have far-reaching distribution, which may exert an important influence on the solubility of elements in precipitation. This investigation provides valuable information on spatial variation and possible sources of trace elements in precipitation over the open oceans corresponding to understudied region.

Optimization of municipal solid waste collection and transportation routes

Energy Technology Data Exchange (ETDEWEB)

Das, Swapan, E-mail: swapan2009sajal@gmail.com; Bhattacharyya, Bidyut Kr., E-mail: bidyut53@yahoo.co.in

2015-09-15

Graphical abstract: Display Omitted - Highlights: • Profitable integrated solid waste management system. • Optimal municipal waste collection scheme between the sources and waste collection centres. • Optimal path calculation between waste collection centres and transfer stations. • Optimal waste routing between the transfer stations and processing plants. - Abstract: Optimization of municipal solid waste (MSW) collection and transportation through source separation becomes one of the major concerns in the MSW management system design, due to the fact that the existing MSW management systems suffer by the high collection and transportation cost. Generally, in a city different waste sources scatter throughout the city in heterogeneous way that increase waste collection and transportation cost in the waste management system. Therefore, a shortest waste collection and transportation strategy can effectively reduce waste collection and transportation cost. In this paper, we propose an optimal MSW collection and transportation scheme that focus on the problem of minimizing the length of each waste collection and transportation route. We first formulize the MSW collection and transportation problem into a mixed integer program. Moreover, we propose a heuristic solution for the waste collection and transportation problem that can provide an optimal way for waste collection and transportation. Extensive simulations and real testbed results show that the proposed solution can significantly improve the MSW performance. Results show that the proposed scheme is able to reduce more than 30% of the total waste collection path length.

Optimization of municipal solid waste collection and transportation routes

International Nuclear Information System (INIS)

Das, Swapan; Bhattacharyya, Bidyut Kr.

2015-01-01

Graphical abstract: Display Omitted - Highlights: • Profitable integrated solid waste management system. • Optimal municipal waste collection scheme between the sources and waste collection centres. • Optimal path calculation between waste collection centres and transfer stations. • Optimal waste routing between the transfer stations and processing plants. - Abstract: Optimization of municipal solid waste (MSW) collection and transportation through source separation becomes one of the major concerns in the MSW management system design, due to the fact that the existing MSW management systems suffer by the high collection and transportation cost. Generally, in a city different waste sources scatter throughout the city in heterogeneous way that increase waste collection and transportation cost in the waste management system. Therefore, a shortest waste collection and transportation strategy can effectively reduce waste collection and transportation cost. In this paper, we propose an optimal MSW collection and transportation scheme that focus on the problem of minimizing the length of each waste collection and transportation route. We first formulize the MSW collection and transportation problem into a mixed integer program. Moreover, we propose a heuristic solution for the waste collection and transportation problem that can provide an optimal way for waste collection and transportation. Extensive simulations and real testbed results show that the proposed solution can significantly improve the MSW performance. Results show that the proposed scheme is able to reduce more than 30% of the total waste collection path length

Polarized electron sources

International Nuclear Information System (INIS)

Clendenin, J.E.

1995-05-01

Polarized electron sources for high energy accelerators took a significant step forward with the introduction of a new laser-driven photocathode source for the SLC in 1992. With an electron beam polarization of >80% and with ∼99% uptime during continuous operation, this source is a key factor in the success of the current SLC high-energy physics program. The SLC source performance is used to illustrate both the capabilities and the limitations of solid-state sources. The beam requirements for future colliders are similar to that of the SLC with the addition in most cases of multiple-bunch operation. A design for the next generation accelerator source that can improve the operational characteristics and at least minimize some of the inherent limitations of present sources is presented. Finally, the possibilities for producing highly polarized electron beams for high-duty-factor accelerators are discussed

Trust-based collective view prediction

CERN Document Server

Luo, Tiejian; Xu, Guandong; Zhou, Jia

2013-01-01

Collective view prediction is to judge the opinions of an active web user based on unknown elements by referring to the collective mind of the whole community. Content-based recommendation and collaborative filtering are two mainstream collective view prediction techniques. They generate predictions by analyzing the text features of the target object or the similarity of users' past behaviors. Still, these techniques are vulnerable to the artificially-injected noise data, because they are not able to judge the reliability and credibility of the information sources. Trust-based Collective View

Site Characterization of the Source Physics Experiment Phase II Location Using Seismic Reflection Data

Science.gov (United States)

Sexton, E. A.; Snelson, C. M.; Chipman, V.; Emer, D. F.; White, R. L.; Emmitt, R.; Wright, A. A.; Drellack, S.; Huckins-Gang, H.; Mercadante, J.; Floyd, M.; McGowin, C.; Cothrun, C.; Bonal, N.

2013-12-01

An objective of the Source Physics Experiment (SPE) is to identify low-yield nuclear explosions from a regional distance. Low-yield nuclear explosions can often be difficult to discriminate among the clutter of natural and man-made explosive events (e.g., earthquakes and mine blasts). The SPE is broken into three phases. Phase I has provided the first of the physics-based data to test the empirical models that have been used to discriminate nuclear events. The Phase I series of tests were placed within a highly fractured granite body. The evolution of the project has led to development of Phase II, to be placed within the opposite end member of geology, an alluvium environment, thereby increasing the database of waveforms to build upon in the discrimination models. Both the granite and alluvium sites have hosted nearby nuclear tests, which provide comparisons for the chemical test data. Phase III of the SPE is yet to be determined. For Phase II of the experiment, characterization of the location is required to develop the geologic/geophysical models for the execution of the experiment. Criteria for the location are alluvium thickness of approximately 170 m and a water table below 170 m; minimal fracturing would be ideal. A P-wave mini-vibroseis survey was conducted at a potential site in alluvium to map out the subsurface geology. The seismic reflection profile consisted of 168 geophone stations, spaced 5 m apart. The mini-vibe was a 7,000-lb peak-force source, starting 57.5 m off the north end of the profile and ending 57.5 m past the southern-most geophone. The length of the profile was 835 m. The source points were placed every 5 m, equally spaced between geophones to reduce clipping. The vibroseis sweep was from 20 Hz down to 180 Hz over 8 seconds, and four sweeps were stacked at each shot location. The shot gathers show high signal-to-noise ratios with clear first arrivals across the entire spread and the suggestion of some shallow reflectors. The data were

The evolution of process-based hydrologic models: historical challenges and the collective quest for physical realism

Science.gov (United States)

Clark, M. P.; Nijssen, B.; Wood, A.; Mizukami, N.; Newman, A. J.

2017-12-01

The diversity in hydrologic models has historically led to great controversy on the "correct" approach to process-based hydrologic modeling, with debates centered on the adequacy of process parameterizations, data limitations and uncertainty, and computational constraints on model analysis. In this paper, we revisit key modeling challenges on requirements to (1) define suitable model equations, (2) define adequate model parameters, and (3) cope with limitations in computing power. We outline the historical modeling challenges, provide examples of modeling advances that address these challenges, and define outstanding research needs. We illustrate how modeling advances have been made by groups using models of different type and complexity, and we argue for the need to more effectively use our diversity of modeling approaches in order to advance our collective quest for physically realistic hydrologic models.

Physics and applications of high energy density plasmas. Extreme state driven by pulsed electromagnetic energy

International Nuclear Information System (INIS)

Horioka, Kazuhiko

2002-06-01

The papers presented at the symposium on ''Physics and application of high energy density plasmas, held December 20-21, 2001 at NIFS'' are collected in this proceedings. The topics covered in the meeting include dense z-pinches, plasma focus, intense charged particle beams, intense radiation sources, discharge pumped X-ray lasers, their diagnostics, and applications of them. The papers reflect the present status and trends in the research field of high energy density plasmas. (author)

Recognition of the importance of geogenic sources in the content of metals in PM2.5 collected in the Mexico City Metropolitan Area.

Science.gov (United States)

Morton-Bermea, Ofelia; Garza-Galindo, Rodrigo; Hernández-Álvarez, Elizabeth; Amador-Muñoz, Omar; Garcia-Arreola, Maria Elena; Ordoñez-Godínez, Sara L; Beramendi-Orosco, Laura; Santos-Medina, Graciela L; Miranda, Javier; Rosas-Pérez, Irma

2018-01-17

The study of airborne metals in urban areas is relevant due to their toxic effects on human health and organisms. In this study, we analyzed metals including rare earth elements (REE) in particles smaller than 2.5 μm (PM 2.5 ), collected at five sites around the Mexico City Metropolitan Area (MCMA), during three periods in 2011: April (dry-warm season, DW), August (rainy season, R), and November (dry-cold season, DC). Principal component analysis allowed identifying factors related to geogenic sources and factors related to anthropogenic sources. The recognition of the high impact of geogenic sources in PM 2.5 is in agreement with the REE distribution patterns, which show similar behavior as those shown by igneous rocks, confirming the influence of the regional geogenic material. Metals associated to geogenic sources showed higher concentration (p  0.05) and no similar seasonal pattern among them. These unexpected results exposed outstanding information regarding the identification of different geogenic sources as the main contributors of metals in the atmospheric environment in the MCMA and highlighted the importance of meteorology in the spatial and seasonal metal patterns.

A physical pattern recognition approach for 2D electromagnetic induction studies

Directory of Open Access Journals (Sweden)

D. Patella

2000-06-01

Full Text Available We present a new tomographic procedure for the analysis of natural source electromagnetic (EM induction field data collected over any complex 2D buried structure beneath a flat air-earth boundary. The tomography is developed in a pure physical context and the primary goal is the depiction of the space distribution of two occurrence probability functions for the induced electrical charge accumulations on resistivity discontinuities and current channelling inside conductive bodies, respectively. The procedure to obtain tomographic image consists of a scanning operation governed analytically by a set of multiple interference cross-correlations between the observed EM components and the corresponding synthetic components of a pair of elementary charge and dipole. To show the potentiality of the proposed physical tomography, we discuss the results from three 2D synthetic examples.

The role of applied physics in American introductory physics courses

Science.gov (United States)

Poduska, Ervin L.; Lunetta, Vincent N.

1984-09-01

To what extent should technology and applied physics be included in introductory physics courses? What is the proper balance between pure and applied physics? Should physics teachers devote precious time to socially relevant issues like nuclear power and alternative sources of energy? How much time should be spent, if any, on applications that are more relevant to the student's world like cars, music, television and refrigeration? Does including applications reduce or enhance student understanding of important classical topics? A response to these questions must be based on goals for physics teaching, on knowledge of how students learn and on the nature of the physics discipline. Since there is not enough time to teach everything in an introductory course, priorities must be determined.

Fundamental neutron physics

International Nuclear Information System (INIS)

Deslattes, R.; Dombeck, T.; Greene, G.; Ramsey, N.; Rauch, H.; Werner, S.

1984-01-01

Fundamental physics experiments of merit can be conducted at the proposed intense neutron sources. Areas of interest include: neutron particle properties, neutron wave properties, and fundamental physics utilizing reactor produced γ-rays. Such experiments require intense, full-time utilization of a beam station for periods ranging from several months to a year or more

Source Reference File

Data.gov (United States)

Social Security Administration — This file contains a national set of names and contact information for doctors, hospitals, clinics, and other facilities (known collectively as sources) from which...

Women Physicists Speak: The 2001 International Study of Women in Physics

Science.gov (United States)

Ivie, Rachel; Czujko, Roman; Stowe, Katie

2002-09-01

The Working Group on Women in Physics of the International Union of Pure and Applied Physics (IUPAP) subcontracted with the Statistical Research Center of the American Institute of Physics (AIP) to conduct an international study on women in physics. This study had two parts. First, we conducted a benchmarking study to identify reliable sources and collect data on the representation of women in physics in as many IUPAP member countries as possible. Second, we conducted an international survey of individual women physicists. The survey addressed issues related to both education and employment. On the education side, we asked about experiences and critical incidents from secondary school through the highest degree earned. On the employment side, we asked about how the respondents' careers had evolved and their self-assessment of how well their careers had progressed. In addition, the questionnaire also addressed issues that cut across education and employment, such as the impact of marriage and children, the factors that contributed the most toward the success they had achieved to date, and suggestions for what could be done to improve the situation of women physicists.

Distribution and Source Identification of Pb Contamination in industrial soil

Science.gov (United States)

Ko, M. S.

2017-12-01

INTRODUCTION Lead (Pb) is toxic element that induce neurotoxic effect to human, because competition of Pb and Ca in nerve system. Lead is classified as a chalophile element and galena (PbS) is the major mineral. Although the Pb is not an abundant element in nature, various anthropogenic source has been enhanced Pb enrichment in the environment after the Industrial Revolution. The representative anthropogenic sources are batteries, paint, mining, smelting, and combustion of fossil fuel. Isotope analysis widely used to identify the Pb contamination source. The Pb has four stable isotopes that are 208Pb, 207Pb, 206Pb, and 204Pb in natural. The Pb is stable isotope and the ratios maintain during physical and chemical fractionation. Therefore, variations of Pb isotope abundance and relative ratios could imply the certain Pb contamination source. In this study, distributions and isotope ratios of Pb in industrial soil were used to identify the Pb contamination source and dispersion pathways. MATERIALS AND METHODS Soil samples were collected at depth 0­-6 m from an industrial area in Korea. The collected soil samples were dried and sieved under 2 mm. Soil pH, aqua-regia digestion and TCLP carried out using sieved soil sample. The isotope analysis was carried out to determine the abundance of Pb isotope. RESULTS AND DISCUSSION The study area was developed land for promotion of industrial facilities. The study area was forest in 1980, and the satellite image show the alterations of land use with time. The variations of land use imply the possibilities of bringing in external contaminated soil. The Pb concentrations in core samples revealed higher in lower soil compare with top soil. Especially, 4 m soil sample show highest Pb concentrations that are approximately 1500 mg/kg. This result indicated that certain Pb source existed at 4 m depth. CONCLUSIONS This study investigated the distribution and source identification of Pb in industrial soil. The land use and Pb

75 FR 12566 - Agency Information Collection Activities: Existing Collection; Comments Requested

Science.gov (United States)

2010-03-16

... appearances and bringing them back to detention, discharging inmates at the behest of the court or other... previous year to June 30 of the current collection year: the number of inmate-inflicted physical assaults...: how many jail operation employees did the facility hire for employment; how many jail operation...

Supporting Collective Inquiry: A Technology Framework for Distributed Learning

Science.gov (United States)

Tissenbaum, Michael

This design-based study describes the implementation and evaluation of a technology framework to support smart classrooms and Distributed Technology Enhanced Learning (DTEL) called SAIL Smart Space (S3). S3 is an open-source technology framework designed to support students engaged in inquiry investigations as a knowledge community. To evaluate the effectiveness of S3 as a generalizable technology framework, a curriculum named PLACE (Physics Learning Across Contexts and Environments) was developed to support two grade-11 physics classes (n = 22; n = 23) engaged in a multi-context inquiry curriculum based on the Knowledge Community and Inquiry (KCI) pedagogical model. This dissertation outlines three initial design studies that established a set of design principles for DTEL curricula, and related technology infrastructures. These principles guided the development of PLACE, a twelve-week inquiry curriculum in which students drew upon their community-generated knowledge base as a source of evidence for solving ill-structured physics problems based on the physics of Hollywood movies. During the culminating smart classroom activity, the S3 framework played a central role in orchestrating student activities, including managing the flow of materials and students using real-time data mining and intelligent agents that responded to emergent class patterns. S3 supported students' construction of knowledge through the use individual, collective and collaborative scripts and technologies, including tablets and interactive large-format displays. Aggregate and real-time ambient visualizations helped the teacher act as a wondering facilitator, supporting students in their inquiry where needed. A teacher orchestration tablet gave the teacher some control over the flow of the scripted activities, and alerted him to critical moments for intervention. Analysis focuses on S3's effectiveness in supporting students' inquiry across multiple learning contexts and scales of time, and in

Children's recreational physical activity

NARCIS (Netherlands)

Kemperman, A.D.A.M.; Timmermans, H.J.P.

2011-01-01

This study explored children's participation in recreational (physical) activities and the extent to which this participation was influenced by individual and household socio-demographics and characteristics of the social and physical environment. Travel and activity diaries were used to collect

Health literacy and sources of health education among adolescents in Greece.

Science.gov (United States)

Vardavas, Constantine I; Kondilis, Barbara K; Patelarou, Evridiki; Akrivos, Patrick D; Falagas, Matthew E

2009-01-01

Knowledge on health and disease prevention and adolescent satisfaction from the health care system are factors that can affect the adolescent's health status. To assess the sources of health information of adolescents in a sample of teenagers from Athens and Crete, Greece. Data were obtained from a convenience sample of 369 adolescents aged 12-18 years from urban areas of Athens and Crete, Greece. Data on health care information sources and overall adolescent health literacy were collected with the use of a questionnaire exploring education on health topics over the past year, sources of health information, and interaction with their physician. More than half the study participants indicated having received information within the past year on oral health, sexually transmitted diseases, physical activity, smoking, and nutrition. The family (71.8%) and the physician (51.5%; boys vs. girls: 44.2% vs. 57.9%, p = .009) are most usually consulted for health information. Girls were found to seek out more sources of health information than boys and to receive more information from their friends (26.9% vs. 11.0%, p programming for youth in Greek schools is imperative to promote healthier lifestyles and to prevent chronic and infectious diseases.

The many Metaphysics within Physics. Essay review of 'The Metaphysics within Physics' by Tim Maudlin

Science.gov (United States)

Suárez, Mauricio

Tim Maudlin's new book The Metaphysics within Physics (Oxford University Press, 2007) collects six essays by one of the most thoughtful and original minds working in the philosophy of physics nowadays. Some had previously circulated informally for years. For example, Chapter 1 ('A Modest Proposal Concerning Laws, Counterfactuals and Explanations') is as old as my own philosophical career-I recall reading a draft in the early 1990s. The mere publication of such a long-awaited collection is therefore already good news. In addition, the degree of coherence and the lack of redundancy are greater than one would expect from a collection of disparate essays written at diverse times and with a range of different targets. The whole book can be understood coherently as an extended argument in favor of a particular 'physics-based' methodology for inquiry in metaphysics. This methodology recommends a detailed and thorough analysis of current physics as a benchmark for any thesis, dispute or argument in metaphysics. It follows that proper metaphysical inquiry must be suitably informed not just about the current state of play in analytical metaphysics but also about the current state of development of the relevant part of present day physics.

New trends in nuclear collective dynamics

International Nuclear Information System (INIS)

Abe, Yasuhisa; Horiuchi, Hisashi; Matsuyanagi, Kenichi

1992-01-01

New Trends in Nuclear Collective Dynamics comprises reviews by well-known researchers from international centers of nuclear physics. This overview of recent advances concentrates on - order amd chaos in finite quantum systems - dissipation in heavy-ion collions - collective motion in warm nuclei - time-dependent mean-field theory with collision terms - nuclear fission and multi-dimensional tunneling - large scale collective motion see hints under the relevent topics. (orig.) With 90 figs

Characterization and modeling of the heat source

Energy Technology Data Exchange (ETDEWEB)

Glickstein, S.S.; Friedman, E.

1993-10-01

A description of the input energy source is basic to any numerical modeling formulation designed to predict the outcome of the welding process. The source is fundamental and unique to each joining process. The resultant output of any numerical model will be affected by the initial description of both the magnitude and distribution of the input energy of the heat source. Thus, calculated weld shape, residual stresses, weld distortion, cooling rates, metallurgical structure, material changes due to excessive temperatures and potential weld defects are all influenced by the initial characterization of the heat source. Understandings of both the physics and the mathematical formulation of these sources are essential for describing the input energy distribution. This section provides a brief review of the physical phenomena that influence the input energy distributions and discusses several different models of heat sources that have been used in simulating arc welding, high energy density welding and resistance welding processes. Both simplified and detailed models of the heat source are discussed.

A review of research in low earth orbit propellant collection

Science.gov (United States)

Singh, Lake A.; Walker, Mitchell L. R.

2015-05-01

This comprehensive review examines the efforts of previous researchers to develop concepts for propellant-collecting spacecraft, estimate the performance of these systems, and understand the physics involved. Rocket propulsion requires the spacecraft to expend two fundamental quantities: energy and propellant mass. A growing number of spacecraft collect the energy they need to execute propulsive maneuvers in-situ with solar panels. In contrast, every spacecraft using rocket propulsion has carried all of the propellant mass needed for the mission from the ground, which limits the range and mission capabilities. Numerous researchers have explored the concept of collecting propellant mass while in space. These concepts have varied in scale and complexity from chemical ramjets to fusion-driven interstellar vessels. Research into propellant-collecting concepts occurred in distinct eras. During the Cold War, concepts tended to be large, complex, and nuclear powered. After the Cold War, concepts transitioned to solar power sources and more effort has been devoted to detailed analysis of specific components of the propellant-collecting architecture. By detailing the major contributions and limitations of previous work, this review concisely presents the state-of-the-art and outlines five areas for continued research. These areas include air-compatible cathode technology, techniques to improve propellant utilization on atmospheric species, in-space compressor and liquefaction technology, improved hypersonic and hyperthermal free molecular flow inlet designs, and improved understanding of how design parameters affect system performance.

Underway physical and meteorological data collected aboard NOAA Ship ALBATROSS IV in the Northwest Atlantic from 1999-11-01 to 2001-05-25 (NODC Accession 0000543)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical, meteorological, and other data were collected in the NW Atlantic (limit-40W) from NOAA Ship ALBATROSS IV from 01 November 1999 to 25 May 2001. Data were...

Physical, chemical, and other data collected using moored bottle casts at the Coastal waters of California from 01 August 1999 to 01 October 1999 (NODC Accession 0000220)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, salinity, physical, chemical, and other data were collected using moored bottle casts in the Coastal Waters of California from the SAMPSON from August...

Spaces of Open-source Politics

DEFF Research Database (Denmark)

Husted, Emil; Plesner, Ursula

2017-01-01

. Inspired by the literature on organizational space, the analysis explores how different organizational spaces configure the party’s process of policy development, thereby adding to our understanding of the relationship between organizational space and political organization. We analyze three different....... Curiously, it seems that physical spaces open up the political process, while digital spaces close it down by fixing meaning. Accordingly, we argue that open-source politics should not be equated with online politics but may be highly dependent on physical spaces. Furthermore, digital spaces may provide......The recent proliferation of Web 2.0 applications and their role in contemporary political life have inspired the coining of the term ‘open-source politics’. This article analyzes how open-source politics is organized in the case of a radical political party in Denmark called The Alternative...

Sports-miscellanea in the collection of Poznań University Library

Directory of Open Access Journals (Sweden)

Bożena Świstek-Oborska

2010-01-01

Full Text Available The article presents writings related to sports subject matters that are currently held at Poznań University Library. The enormous variety of related material that includes both books and periodicals, as well as library materials from the special collection (iconographic material and social life documents, is identified and discussed. The article investigates various writings: books and periodicals from the collection of the Kaiser-Wilhelm-Bibliothek from the years 1898-1918, a collection of pre-war picture post cards and picture post cards depicting sports events and activities that illustrate primarily the activities of Polskie Towarzystwo Gimnastyczne “Sokół” in Poznań (Polish Gymnastic Society “Falcon” and a collection of sports obituaries, of coaches, referees and sports officials from Poznań and the Wielkopolska region. The contents of the material cover, on the one hand, sports events and the activities of sports organizations in Germany and the Wielkopolska region (from the end of the nineteenth century to the 1930s and provide a discussion on a number of the most popular sports disciplines such as gymnastics, horse ridding, shooting and cycling on the other. The presented documents were used primarily in promoting physical culture within German and Polish population of the region and now provide invaluable source in the history of sports.

Breathing new life into old collections - revitalising Geoscience Australia Microscope Slide Based collections through the use of Citizen Science

Science.gov (United States)

Bastrakova, I.; Pring, J.; Blewett, R.; Champion, D. C.; Poignand, B.; Raymond, O.; Evans, N.; Stewart, A.; Butler, P.

2017-12-01

Since soon after the federation of Australia in 1901 Geoscience Australia, and its predecessors organisations, have gathered a significant collection of microscope slide based items (including: thin sections of rock, micro and nano fossils) from across Australia, Antarctica, Papua New Guinea, the Asia Pacific region and beyond. The samples from which the microscope slides were produced have been gathered via extensive geological mapping programs, work conducted for major Commonwealth building initiatives such as the Snowy Mountain Scheme and science expeditions. The cost of recreating this collection, if at all possible, would be measured in the $100Ms (AUS) even assuming that it was still possible to source the relevant samples. While access to these microscope slides is open to industry, educational institutions and the public it has not been easy to locate specific slides due to the management system. The management of this collection was based largely on an aged card catalogue and ledger system. The fragmented nature of the management system with the increasing potential for the deterioration of physical media and the loss of access to even some of the original contributors meant that rescue work was (and still is) needed urgently. Achieving progress on making the microscope slides discoverable and accessible in the current fiscally constrained environment dictated a departure from what might be considered a traditional approach to the project and saw the extensive use of a citizen science approach. Through the use of a citizen science approach the proof of concept project has seen the transcription of some 35,000 sample metadata and data records (2.5 times our current electronic holdings) from a variety of hardcopy sources by a diverse group of volunteers. The availability of this data has allowed for the electronic discovery of both the microscope slides and their parent samples, and will hopefully lead to a greater utilisation of this valuable resource and

Report on water quality, sediment and water chemistry data for water and sediment samples collected from source areas to Melton Hill and Watts Bar reservoirs

International Nuclear Information System (INIS)

Tomaszewski, T.M.; Bruggink, D.J.; Nunn, D.L.

1995-01-01

Contamination of surface water and sediments in the Clinch River and Watts Bar Reservoir (CR/WBR) system as a result of past and present activities by the US Department of Energy (DOE) on the Oak Ridge Reservation (ORR) and also activities by non-ORR facilities are being studied by the Clinch River Environmental Restoration Program (CR-ERP). Previous studies have documented the presence of heavy metals, organics, and radionuclides in the sediments of reservoirs in the vicinity. In support of the CR-ERP, during the summer of 1991, TVA collected and evaluated water and sediment samples from swimming areas and municipal water intakes on Watts Bar Reservoir, Melton Hill Reservoir and Norris Reservoir, which was considered a source of less-contaminated reference or background data. Despite the numerous studies, until the current work documented by this report, relatively few sediment or water samples had been collected by the CR-ERP in the immediate vicinity of contaminant point sources. This work focused on water and sediment samples taken from points immediately downstream from suspected effluent point sources both on and off the ORR. In August and September, 1994, TVA sampled surface water and sediment at twelve locations in melton Hill and Watts Bar Reservoirs

Possible physical universes

Directory of Open Access Journals (Sweden)

Gordon McCabe

2005-12-01

Full Text Available The purpose of this paper is to discuss the various types of physical universe which could exist according to modern mathematical physics. The paper begins with an introduction that approaches the question from the viewpoint of ontic structural realism. Section 2 takes the case of the 'multiverse' of spatially homogeneous universes, and analyses the famous Collins-Hawking argument, which purports to show that our own universe is a very special member of this collection. Section 3 considers the multiverse of all solutions to the Einstein field equations, and continues the discussion of whether the notions of special and typical can be defined within such a collection.

Tools for Trade Analysis and Open Source Information Monitoring for Non-proliferation

International Nuclear Information System (INIS)

Cojazzi, G.G.M.; Versino, C.; Wolfart, E.; Renda, G.; Janssens, W.A.M.; )

2015-01-01

The new state level approach being proposed by IAEA envisions an objective based and information driven safeguards approach utilizing all relevant information to improve the effectiveness and efficiency of safeguards. To this goal the IAEA makes also use of open source information, here broadly defined as any information that is neither classified nor proprietary. It includes, but is not limited to: media sources, government and non-governmental reports and analyzes, commercial data, and scientific/technical literature, including trade data. Within the EC support programme to IAEA, JRC has surveyed and catalogued open sources on import-export customs trade data and developed tools for supporting the use of the related databases in safeguards. The JRC software The Big Table, (TBT), supports i.a.: a) the search through a collection of reference documents relevant to trade analysis (legal/regulatory documents, technical handbooks); b) the selection of items of interests to specific verifications and c) the mapping of these items to customs commodities searchable in trade databases. In the field of open source monitoring, JRC is developing and operating a ''Nuclear Security Media Monitor'' (NSMM), which is a web-based multilingual news aggregation system that automatically collects news articles from pre-defined web sites. NSMM is a domain specific version of the general JRC-Europe Media Monitor (EMM). NSMM has been established within the EC support programme with the aim, i.e., to streamline IAEA's process of open source information monitoring. In the first part, the paper will recall the trade data sources relevant for non-proliferation and will then illustrate the main features of TBT, recently coupled with the IAEA Physical Model, and new visualization techniques applied to trade data. In the second part it will present the main aspects of the NSMM also by illustrating some of uses done at JRC. (author)

High average power supercontinuum sources

Indian Academy of Sciences (India)

The physical mechanisms and basic experimental techniques for the creation of high average spectral power supercontinuum sources is briefly reviewed. We focus on the use of high-power ytterbium-doped fibre lasers as pump sources, and the use of highly nonlinear photonic crystal fibres as the nonlinear medium.

Using Primary Source Documents.

Science.gov (United States)

Mintz, Steven

2003-01-01

Explores the use of primary sources when teaching about U.S. slavery. Includes primary sources from the Gilder Lehrman Documents Collection (New York Historical Society) to teach about the role of slaves in the Revolutionary War, such as a proclamation from Lord Dunmore offering freedom to slaves who joined his army. (CMK)

From open source communications to knowledge

Science.gov (United States)

Preece, Alun; Roberts, Colin; Rogers, David; Webberley, Will; Innes, Martin; Braines, Dave

2016-05-01

Rapid processing and exploitation of open source information, including social media sources, in order to shorten decision-making cycles, has emerged as an important issue in intelligence analysis in recent years. Through a series of case studies and natural experiments, focussed primarily upon policing and counter-terrorism scenarios, we have developed an approach to information foraging and framing to inform decision making, drawing upon open source intelligence, in particular Twitter, due to its real-time focus and frequent use as a carrier for links to other media. Our work uses a combination of natural language (NL) and controlled natural language (CNL) processing to support information collection from human sensors, linking and schematising of collected information, and the framing of situational pictures. We illustrate the approach through a series of vignettes, highlighting (1) how relatively lightweight and reusable knowledge models (schemas) can rapidly be developed to add context to collected social media data, (2) how information from open sources can be combined with reports from trusted observers, for corroboration or to identify con icting information; and (3) how the approach supports users operating at or near the tactical edge, to rapidly task information collection and inform decision-making. The approach is supported by bespoke software tools for social media analytics and knowledge management.

Progress in physical chemistry

CERN Document Server

Hempelmann, Rolf

2008-01-01

Progress in Physical Chemistry is a collection of recent ""Review Articles"" published in the ""Zeitschrift für Physikalische Chemie"". The second volume of Progress in Physical Chemistry is a collection of thematically closely related minireview articles written by the members of the Collaborative Research Centre (SFB) 277 of the German Research Foundation (DFG). These articles are based on twelve years of intense coordinated research efforts. Central topics are the synthesis and the characterization of interface-dominated, i.e. nanostructured materials, mainly in the solid state but also as

77 FR 60022 - Proposed Collection; Comment Request for Information Collection Tools

Science.gov (United States)

2012-10-01

... OMB. Type of Review: Extension of a currently approved collection. Affected Public: Businesses and... information technology; and (e) estimates of capital or start-up costs and costs of operation, maintenance... C (Form 1040), Profit or Loss From Business; Form 8907, Nonconventional Source Fuel Credit; and REG...

LHC physics

National Research Council Canada - National Science Library

Binoth, T

2012-01-01

"Exploring the phenomenology of the Large Hadron Collider (LHC) at CERN, LHC Physics focuses on the first years of data collected at the LHC as well as the experimental and theoretical tools involved...

Information collection strategies to support strengthened safeguards

International Nuclear Information System (INIS)

Costantini, L.; Hill, J.

2001-01-01

The IAEA Board of Governors approved the implementation of Part 1 of Strengthened Safeguards in June 1995. Since then, the collection and analysis of information beyond that provided by States parties and acquired by inspectors under NPT Safeguards Agreements has been an integral part of IAEA safeguards. The Agency has formally established internal structures and procedures to facilitate the effective use of open-source and other information not previously used in safeguards. Over this period the IAEA Division of Safeguards Information Technology (SGIT) has been building its collections of electronically held open source information. Some of these collections are quite nuclear-specific, such as material from the Monterey Institute in California, and nuclear news collections provided voluntarily by a number of Member States. Others are completely general news sources. Several of these collections contain many more reports than could possibly be reviewed by a human analyst. So a need has arisen for computerised search facilities to identify nuclear-relevant items from those collections. The Agency has more than one piece of software available to help searching and analysis of substantial collections of reports. Search 97 from Verity was chosen for this particular application because it is very straightforward to use, and it was expected that personnel from all over the Department of Safeguards would carry out these searches on a routine basis. The approach whereby special-purpose search mechanisms are designed for use by a large number of users, who are unfamiliar with the details of the search software, seems to be unusual if not unique to the Agency

Physics Division annual review, April 1, 1990--March 31, 1991

International Nuclear Information System (INIS)

1991-06-01

This report discusses: Research At Atlas; Operation and Development of Atlas; Medium-Energy Nuclear Physics and Weak Interactions; Theoretical Nuclear Physics; High-Resolution Laser-rf Spectroscopy with Beams of Atoms and Molecules; Fast Ion-Beam/Laser Studies of Atomic and Molecular Structure; Interactions of Fast Atomic and Molecular Ions with Solid and Gaseous Targets; Theoretical Atomic Physics; Atomic Physics at Atlas and the ECR Source; Atomic Physics at Synchrotron Light Sources; and Accelerator Facilities for Atomic Physics

FTP archives for physics

International Nuclear Information System (INIS)

Trunec, D.; Brablec, A.; Kapicka, V.

1995-01-01

We have established archives for programs, data, papers etc. in physics (mainly for plasma physics). The archives are located at computer ftp.muni.cz in the directory pub/muni.cz/physics. These archives can be reached by anonymous FTP or by gopher server gopher.muni.cz (147.251.4.33). At the present time, programs for PC, cross sections for electrons, swarm parameters and rate constants stored are in the archives. We would like to collect the programs for calculations in physics (mainly for PC). We suppose that each program should have a testing example and some description. We would also like to collect physical constants and experimental or theoretical data (e.g. cross sections, swarm parameters and rate constants), which are important for other calculation or for comparison with the results of others studies. Interested scholars are invited to sent us their programs, data, preprints and reports for these archives. All files in the archives are in public domain and can be obtained using computer network Internet

Physics and applications of high energy density plasmas. Extreme state driven by pulsed electromagnetic energy

Energy Technology Data Exchange (ETDEWEB)

Horioka, Kazuhiko (ed.)

2002-06-01

The papers presented at the symposium on ''Physics and application of high energy density plasmas, held December 20-21, 2001 at NIFS'' are collected in this proceedings. The topics covered in the meeting include dense z-pinches, plasma focus, intense charged particle beams, intense radiation sources, discharge pumped X-ray lasers, their diagnostics, and applications of them. The papers reflect the present status and trends in the research field of high energy density plasmas. (author)

White source gamma-ray production spectral measurement facilities in the USA

International Nuclear Information System (INIS)

Larson, D.C.; Dickens, J.K.; Nelson, R.O.; Wender, S.A.

1991-01-01

The two primary neutron sources for measuring gamma-ray production (GRP) cross sections for basic and applied work in the USA are the Oak Ridge Electron Linear Accelerator (ORELA) located at the Oak Ridge National Laboratory (ORNL) and the Weapons Neutron Research (WNR) facility located at the Los Alamos National Laboratory (LANL). ORELA is based on a 180-MeV electron linear accelerator, while the WNR facility uses the Los Alamos Meson Physics Facility 800 MeV proton beam to produce neutrons. The facilities collectively cover the neutron-energy range from thermal to over 700 MeV. The paper describes the present capabilities for GRP measurements at each facility. 18 refs

Health physics instrument manual

International Nuclear Information System (INIS)

Gupton, E.D.

1978-08-01

The purpose of this manual is to provide apprentice health physics surveyors and other operating groups not directly concerned with radiation detection instruments a working knowledge of the radiation detection and measuring instruments in use at the Laboratory. The characteristics and applications of the instruments are given. Portable instruments, stationary instruments, personnel monitoring instruments, sample counters, and miscellaneous instruments are described. Also, information sheets on calibration sources, procedures, and devices are included. Gamma sources, beta sources, alpha sources, neutron sources, special sources, a gamma calibration device for badge dosimeters, and a calibration device for ionization chambers are described

Nonlinear delta f Simulations of Collective Effects in Intense Charged Particle Beams

CERN Document Server

Hong Qi

2003-01-01

A nonlinear delta(f) particle simulation method based on the Vlasov-Maxwell equations has been recently developed to study collective processes in high-intensity beams, where space-charge and magnetic self-field effects play a critical role in determining the nonlinear beam dynamics. Implemented in the Beam Equilibrium, Stability and Transport (BEST) code [H. Qin, R.C. Davidson, and W.W. Lee, Physical Review -- Special Topics on Accelerator and Beams 3 (2000) 084401; 3 (2000) 109901.], the nonlinear delta(f) method provides a low-noise and self-consistent tool for simulating collective interactions and nonlinear dynamics of high-intensity beams in modern and next-generation accelerators and storage rings, such as the Spallation Neutron Source and heavy ion fusion drivers. A wide range of linear eigenmodes of high-intensity charged-particle beams can be systematically studied using the BEST code. Simulation results for the electron-proton two-stream instability in the Proton Storage Ring experiment [R. Macek, ...

Contrasts between chemical and physical estimates of baseflow help discern multiple sources of water contributing to rivers

Science.gov (United States)

Cartwright, I.; Gilfedder, B.; Hofmann, H.

2013-05-01

This study compares geochemical and physical methods of estimating baseflow in the upper reaches of the Barwon River, southeast Australia. Estimates of baseflow from physical techniques such as local minima and recursive digital filters are higher than those based on chemical mass balance using continuous electrical conductivity (EC). Between 2001 and 2011 the baseflow flux calculated using chemical mass balance is between 1.8 × 103 and 1.5 × 104 ML yr-1 (15 to 25% of the total discharge in any one year) whereas recursive digital filters yield baseflow fluxes of 3.6 × 103 to 3.8 × 104 ML yr-1 (19 to 52% of discharge) and the local minimum method yields baseflow fluxes of 3.2 × 103 to 2.5 × 104 ML yr-1 (13 to 44% of discharge). These differences most probably reflect how the different techniques characterise baseflow. Physical methods probably aggregate much of the water from delayed sources as baseflow. However, as many delayed transient water stores (such as bank return flow or floodplain storage) are likely to be geochemically similar to surface runoff, chemical mass balance calculations aggregate them with the surface runoff component. The mismatch between geochemical and physical estimates is greatest following periods of high discharge in winter, implying that these transient stores of water feed the river for several weeks to months. Consistent with these interpretations, modelling of bank storage indicates that bank return flows provide water to the river for several weeks after flood events. EC vs. discharge variations during individual flow events also imply that an inflow of low EC water stored within the banks or on the floodplain occurs as discharge falls. The joint use of physical and geochemical techniques allows a better understanding of the different components of water that contribute to river flow, which is important for the management and protection of water resources.

Teaching quantum physics by the sum over paths approach and GeoGebra simulations

International Nuclear Information System (INIS)

Malgieri, M; Onorato, P; De Ambrosis, A

2014-01-01

We present a research-based teaching sequence in introductory quantum physics using the Feynman sum over paths approach. Our reconstruction avoids the historical pathway, and starts by reconsidering optics from the standpoint of the quantum nature of light, analysing both traditional and modern experiments. The core of our educational path lies in the treatment of conceptual and epistemological themes, peculiar of quantum theory, based on evidence from quantum optics, such as the single photon Mach–Zehnder and Zhou–Wang–Mandel experiments. The sequence is supported by a collection of interactive simulations, realized in the open source GeoGebra environment, which we used to assist students in learning the basics of the method, and help them explore the proposed experimental situations as modeled in the sum over paths perspective. We tested our approach in the context of a post-graduate training course for pre-service physics teachers; according to the data we collected, student teachers displayed a greatly improved understanding of conceptual issues, and acquired significant abilities in using the sum over path method for problem solving. (paper)

Physics education students’ cognitive and affective domains toward ecological phenomena

Science.gov (United States)

Napitupulu, N. D.; Munandar, A.; Redjeki, S.; Tjasyono, B.

2018-05-01

Environmental education is become prominent in dealing with natural phenomena that occur nowadays. Studying environmental physics will lead students to have conceptual understanding which are importent in enhancing attitudes toward ecological phenomena that link directry to cognitive and affective domains. This research focused on the the relationship of cognitive and affective domains toward ecological phenomena. Thirty-seven Physics Education students participated in this study and validated sources of data were collected to eksplore students’ conceptual understanding as cognitive domain and to investigate students’ attitudes as affective domain. The percentage of cognitive outcome and affective outcome are explore. The features of such approaches to environmental learning are discussion through analysis of contribution of cognitive to develop the attitude ecological as affective outcome. The result shows that cognitive domains do not contribute significantly to affective domain toward ecological henomena as an issue trend in Central Sulawesi although students had passed Environmental Physics instruction for two semester. In fact, inferior knowledge in a way actually contributes to the attitude domain caused by the prior knowledge that students have as ombo as a Kaili local wisdom.

Prospective Physics Teachers' Views on Their Knowledge about the New Concepts in Turkish High School Physics Curricula

Science.gov (United States)

Kapucu, Serkan; Yildirim, Ufuk

2012-01-01

The purpose of this study was to a) investigate prospective physics teachers' views on their knowledge about new physics concepts introduced in Turkish High School Physics Curricula; b) investigate the sources of their acquired knowledge about these new physics concepts; and c) explore if there were differences in views on knowledge about these…

Physics Mining of Multi-Source Data Sets

Science.gov (United States)

Helly, John; Karimabadi, Homa; Sipes, Tamara

2012-01-01

Powerful new parallel data mining algorithms can produce diagnostic and prognostic numerical models and analyses from observational data. These techniques yield higher-resolution measures than ever before of environmental parameters by fusing synoptic imagery and time-series measurements. These techniques are general and relevant to observational data, including raster, vector, and scalar, and can be applied in all Earth- and environmental science domains. Because they can be highly automated and are parallel, they scale to large spatial domains and are well suited to change and gap detection. This makes it possible to analyze spatial and temporal gaps in information, and facilitates within-mission replanning to optimize the allocation of observational resources. The basis of the innovation is the extension of a recently developed set of algorithms packaged into MineTool to multi-variate time-series data. MineTool is unique in that it automates the various steps of the data mining process, thus making it amenable to autonomous analysis of large data sets. Unlike techniques such as Artificial Neural Nets, which yield a blackbox solution, MineTool's outcome is always an analytical model in parametric form that expresses the output in terms of the input variables. This has the advantage that the derived equation can then be used to gain insight into the physical relevance and relative importance of the parameters and coefficients in the model. This is referred to as physics-mining of data. The capabilities of MineTool are extended to include both supervised and unsupervised algorithms, handle multi-type data sets, and parallelize it.

75 FR 73133 - Agency Information Collection Activities: Proposed Collection; Comment Request

Science.gov (United States)

2010-11-29

... pending NRC action to submit an information collection request to the Office of Management and Budget (OMB) and solicitation of public comment. SUMMARY: The NRC invites public comment about our intention to... Energy Agency (IAEA). Licensees use Form 741 to make inventory and accounting reports for certain source...

Physical and chemical properties of Red MSX Sources in the southern sky: H II regions

Science.gov (United States)

Yu, Naiping; Wang, Jun-Jie; Li, Nan

2015-01-01

We have studied the physical and chemical properties of 18 southern Red Midcourse Space Experiment Sources (RMSs), using archival data taken from the Atacama Pathfinder Experiment (APEX) Telescope Large Area Survey of the Galaxy, the Australia Telescope Compact Array, and the Millimeter Astronomy Legacy Team Survey at 90 GHz. Most of our sources have simple cometary/unresolved radio emissions at 4.8 and/or 8.6GHz. The large number of Lyman continuum fluxes (NL) indicates they are probably massive O- or early B-type star formation regions. Archival IRAS infrared data are used to estimate the dust temperature, which is about 30 K of our sources. Then, the H2 column densities and the volume-averaged H2 number densities are estimated using the 870 μm dust emissions. Large-scale infall and ionized accretions may be occurring in G345.4881+00.3148. We also attempt to characterize the chemical properties of these RMSs through molecular line (N2H+ (1-0) and HCO+ (1-0)) observations. Most of the detected N2H+ and HCO+ emissions match well with the dust emission, implying a close link to their chemical evolution in the RMSs. We found that the abundance of N2H+ is one order of magnitude lower than that in other surveys of infrared dark clouds, and a positive correlation between the abundances of N2H+ and HCO+. The fractional abundance of N2H+ with respect to H2 seems to decrease as a function of NL. These observed trends could be interpreted as an indication of enhanced destruction of N2H+, either by CO or through dissociative recombination with electrons produced by central UV photons.

Neutrino physics with JUNO

Science.gov (United States)

An, Fengpeng; An, Guangpeng; An, Qi; Antonelli, Vito; Baussan, Eric; Beacom, John; Bezrukov, Leonid; Blyth, Simon; Brugnera, Riccardo; Buizza Avanzini, Margherita; Busto, Jose; Cabrera, Anatael; Cai, Hao; Cai, Xiao; Cammi, Antonio; Cao, Guofu; Cao, Jun; Chang, Yun; Chen, Shaomin; Chen, Shenjian; Chen, Yixue; Chiesa, Davide; Clemenza, Massimiliano; Clerbaux, Barbara; Conrad, Janet; D'Angelo, Davide; De Kerret, Hervé; Deng, Zhi; Deng, Ziyan; Ding, Yayun; Djurcic, Zelimir; Dornic, Damien; Dracos, Marcos; Drapier, Olivier; Dusini, Stefano; Dye, Stephen; Enqvist, Timo; Fan, Donghua; Fang, Jian; Favart, Laurent; Ford, Richard; Göger-Neff, Marianne; Gan, Haonan; Garfagnini, Alberto; Giammarchi, Marco; Gonchar, Maxim; Gong, Guanghua; Gong, Hui; Gonin, Michel; Grassi, Marco; Grewing, Christian; Guan, Mengyun; Guarino, Vic; Guo, Gang; Guo, Wanlei; Guo, Xin-Heng; Hagner, Caren; Han, Ran; He, Miao; Heng, Yuekun; Hsiung, Yee; Hu, Jun; Hu, Shouyang; Hu, Tao; Huang, Hanxiong; Huang, Xingtao; Huo, Lei; Ioannisian, Ara; Jeitler, Manfred; Ji, Xiangdong; Jiang, Xiaoshan; Jollet, Cécile; Kang, Li; Karagounis, Michael; Kazarian, Narine; Krumshteyn, Zinovy; Kruth, Andre; Kuusiniemi, Pasi; Lachenmaier, Tobias; Leitner, Rupert; Li, Chao; Li, Jiaxing; Li, Weidong; Li, Weiguo; Li, Xiaomei; Li, Xiaonan; Li, Yi; Li, Yufeng; Li, Zhi-Bing; Liang, Hao; Lin, Guey-Lin; Lin, Tao; Lin, Yen-Hsun; Ling, Jiajie; Lippi, Ivano; Liu, Dawei; Liu, Hongbang; Liu, Hu; Liu, Jianglai; Liu, Jianli; Liu, Jinchang; Liu, Qian; Liu, Shubin; Liu, Shulin; Lombardi, Paolo; Long, Yongbing; Lu, Haoqi; Lu, Jiashu; Lu, Jingbin; Lu, Junguang; Lubsandorzhiev, Bayarto; Ludhova, Livia; Luo, Shu; Lyashuk, Vladimir; Möllenberg, Randolph; Ma, Xubo; Mantovani, Fabio; Mao, Yajun; Mari, Stefano M.; McDonough, William F.; Meng, Guang; Meregaglia, Anselmo; Meroni, Emanuela; Mezzetto, Mauro; Miramonti, Lino; Mueller, Thomas; Naumov, Dmitry; Oberauer, Lothar; Ochoa-Ricoux, Juan Pedro; Olshevskiy, Alexander; Ortica, Fausto; Paoloni, Alessandro; Peng, Haiping; Peng, Jen-Chieh; Previtali, Ezio; Qi, Ming; Qian, Sen; Qian, Xin; Qian, Yongzhong; Qin, Zhonghua; Raffelt, Georg; Ranucci, Gioacchino; Ricci, Barbara; Robens, Markus; Romani, Aldo; Ruan, Xiangdong; Ruan, Xichao; Salamanna, Giuseppe; Shaevitz, Mike; Sinev, Valery; Sirignano, Chiara; Sisti, Monica; Smirnov, Oleg; Soiron, Michael; Stahl, Achim; Stanco, Luca; Steinmann, Jochen; Sun, Xilei; Sun, Yongjie; Taichenachev, Dmitriy; Tang, Jian; Tkachev, Igor; Trzaska, Wladyslaw; van Waasen, Stefan; Volpe, Cristina; Vorobel, Vit; Votano, Lucia; Wang, Chung-Hsiang; Wang, Guoli; Wang, Hao; Wang, Meng; Wang, Ruiguang; Wang, Siguang; Wang, Wei; Wang, Yi; Wang, Yi; Wang, Yifang; Wang, Zhe; Wang, Zheng; Wang, Zhigang; Wang, Zhimin; Wei, Wei; Wen, Liangjian; Wiebusch, Christopher; Wonsak, Björn; Wu, Qun; Wulz, Claudia-Elisabeth; Wurm, Michael; Xi, Yufei; Xia, Dongmei; Xie, Yuguang; Xing, Zhi-zhong; Xu, Jilei; Yan, Baojun; Yang, Changgen; Yang, Chaowen; Yang, Guang; Yang, Lei; Yang, Yifan; Yao, Yu; Yegin, Ugur; Yermia, Frédéric; You, Zhengyun; Yu, Boxiang; Yu, Chunxu; Yu, Zeyuan; Zavatarelli, Sandra; Zhan, Liang; Zhang, Chao; Zhang, Hong-Hao; Zhang, Jiawen; Zhang, Jingbo; Zhang, Qingmin; Zhang, Yu-Mei; Zhang, Zhenyu; Zhao, Zhenghua; Zheng, Yangheng; Zhong, Weili; Zhou, Guorong; Zhou, Jing; Zhou, Li; Zhou, Rong; Zhou, Shun; Zhou, Wenxiong; Zhou, Xiang; Zhou, Yeling; Zhou, Yufeng; Zou, Jiaheng

2016-03-01

The Jiangmen Underground Neutrino Observatory (JUNO), a 20 kton multi-purpose underground liquid scintillator detector, was proposed with the determination of the neutrino mass hierarchy (MH) as a primary physics goal. The excellent energy resolution and the large fiducial volume anticipated for the JUNO detector offer exciting opportunities for addressing many important topics in neutrino and astro-particle physics. In this document, we present the physics motivations and the anticipated performance of the JUNO detector for various proposed measurements. Following an introduction summarizing the current status and open issues in neutrino physics, we discuss how the detection of antineutrinos generated by a cluster of nuclear power plants allows the determination of the neutrino MH at a 3-4σ significance with six years of running of JUNO. The measurement of antineutrino spectrum with excellent energy resolution will also lead to the precise determination of the neutrino oscillation parameters {{sin}}2{θ }12, {{Δ }}{m}212, and | {{Δ }}{m}{ee}2| to an accuracy of better than 1%, which will play a crucial role in the future unitarity test of the MNSP matrix. The JUNO detector is capable of observing not only antineutrinos from the power plants, but also neutrinos/antineutrinos from terrestrial and extra-terrestrial sources, including supernova burst neutrinos, diffuse supernova neutrino background, geoneutrinos, atmospheric neutrinos, and solar neutrinos. As a result of JUNO's large size, excellent energy resolution, and vertex reconstruction capability, interesting new data on these topics can be collected. For example, a neutrino burst from a typical core-collapse supernova at a distance of 10 kpc would lead to ˜5000 inverse-beta-decay events and ˜2000 all-flavor neutrino-proton ES events in JUNO, which are of crucial importance for understanding the mechanism of supernova explosion and for exploring novel phenomena such as collective neutrino oscillations

Teaching Physics for Conceptual Understanding Exemplified for Einstein's Special Relativity

Science.gov (United States)

Undreiu, Lucian M.

2006-12-01

In most liberal arts colleges the prerequisites for College Physics, Introductory or Calculus based, are strictly related to Mathematics. As a state of fact, the majorities of the students perceive Physics as a conglomerate of mathematical equations, a collection of facts to be memorized and they regard Physics as one of the most difficult subjects. A change of this attitude towards Physics, and Science in general, is intrinsically connected with the promotion of conceptual understanding and stimulation of critical thinking. In such an environment, the educators are facilitators, rather than the source of knowledge. One good way of doing this is to challenge the students to think about what they see around them and to connect physics with the real world. Motivation occurs when students realize that what was learned is interesting and relevant. Visual teaching aids such as educational videos or computer simulations, as well as computer-assisted experiments, can greatly enhance the effectiveness of a science lecture or laboratory. Difficult topics can be discussed through animated analogies. Special Relativity is recognized as a challenging topic and is probably one of the most misunderstood theories of Physics. While understanding Special Relativity requires a detachment from ordinary perception and every day life notions, animated analogies can prove to be very successful in making difficult topics accessible.

Pseudo-dynamic source modelling with 1-point and 2-point statistics of earthquake source parameters

KAUST Repository

Song, S. G.

2013-12-24

Ground motion prediction is an essential element in seismic hazard and risk analysis. Empirical ground motion prediction approaches have been widely used in the community, but efficient simulation-based ground motion prediction methods are needed to complement empirical approaches, especially in the regions with limited data constraints. Recently, dynamic rupture modelling has been successfully adopted in physics-based source and ground motion modelling, but it is still computationally demanding and many input parameters are not well constrained by observational data. Pseudo-dynamic source modelling keeps the form of kinematic modelling with its computational efficiency, but also tries to emulate the physics of source process. In this paper, we develop a statistical framework that governs the finite-fault rupture process with 1-point and 2-point statistics of source parameters in order to quantify the variability of finite source models for future scenario events. We test this method by extracting 1-point and 2-point statistics from dynamically derived source models and simulating a number of rupture scenarios, given target 1-point and 2-point statistics. We propose a new rupture model generator for stochastic source modelling with the covariance matrix constructed from target 2-point statistics, that is, auto- and cross-correlations. Our sensitivity analysis of near-source ground motions to 1-point and 2-point statistics of source parameters provides insights into relations between statistical rupture properties and ground motions. We observe that larger standard deviation and stronger correlation produce stronger peak ground motions in general. The proposed new source modelling approach will contribute to understanding the effect of earthquake source on near-source ground motion characteristics in a more quantitative and systematic way.

Collective network for computer structures

Science.gov (United States)

Blumrich, Matthias A [Ridgefield, CT; Coteus, Paul W [Yorktown Heights, NY; Chen, Dong [Croton On Hudson, NY; Gara, Alan [Mount Kisco, NY; Giampapa, Mark E [Irvington, NY; Heidelberger, Philip [Cortlandt Manor, NY; Hoenicke, Dirk [Ossining, NY; Takken, Todd E [Brewster, NY; Steinmacher-Burow, Burkhard D [Wernau, DE; Vranas, Pavlos M [Bedford Hills, NY

2011-08-16

A system and method for enabling high-speed, low-latency global collective communications among interconnected processing nodes. The global collective network optimally enables collective reduction operations to be performed during parallel algorithm operations executing in a computer structure having a plurality of the interconnected processing nodes. Router devices ate included that interconnect the nodes of the network via links to facilitate performance of low-latency global processing operations at nodes of the virtual network and class structures. The global collective network may be configured to provide global barrier and interrupt functionality in asynchronous or synchronized manner. When implemented in a massively-parallel supercomputing structure, the global collective network is physically and logically partitionable according to needs of a processing algorithm.

Environmental Survey of Drinking Water Sources in Kampala, Uganda, during a Typhoid Fever Outbreak.

Science.gov (United States)

Murphy, J L; Kahler, A M; Nansubuga, I; Nanyunja, E M; Kaplan, B; Jothikumar, N; Routh, J; Gómez, G A; Mintz, E D; Hill, V R

2017-12-01

In 2015, a typhoid fever outbreak began in downtown Kampala, Uganda, and spread into adjacent districts. In response, an environmental survey of drinking water source types was conducted in areas of the city with high case numbers. A total of 122 samples was collected from 12 source types and tested for Escherichia coli , free chlorine, and conductivity. An additional 37 grab samples from seven source types and 16 paired large volume (20 liter) samples from wells and springs were also collected and tested for the presence of Salmonella enterica serovar Typhi. Escherichia coli was detected in 60% of kaveras (drinking water sold in plastic bags) and 80% of refilled water bottles; free chlorine was not detected in either source type. Most jerry cans (68%) contained E. coli and had free chlorine residuals below the WHO-recommended level of 0.5 mg/liter during outbreaks. Elevated conductivity readings for kaveras, refilled water bottles, and jerry cans (compared to treated surface water supplied by the water utility) suggested that they likely contained untreated groundwater. All unprotected springs and wells and more than 60% of protected springs contained E. coli Water samples collected from the water utility were found to have acceptable free chlorine levels and no detectable E. coli While S Typhi was not detected in water samples, Salmonella spp. were detected in samples from two unprotected springs, one protected spring, and one refilled water bottle. These data provided clear evidence that unregulated vended water and groundwater represented a risk for typhoid transmission. IMPORTANCE Despite the high incidence of typhoid fever globally, relatively few outbreak investigations incorporate drinking water testing. During waterborne disease outbreaks, measurement of physical-chemical parameters, such as free chlorine residual and electrical conductivity, and of microbiological parameters, such as the presence of E. coli or the implicated etiologic agent, in drinking

A Web GIS-Based Platform to Harvest Georeferenced Data from Social Networks: Examples of Data Collection Regarding Disaster Events

Directory of Open Access Journals (Sweden)

Cidália Costa Fonte

2018-02-01

Full Text Available Whenever disaster situations occur the civil protection authorities need to have fast access to data that may help to plan emergency response. To contribute to the collection and integration of all available data a platform that aims to harvest Volunteered Geographical Information (VGI from social networks and collaborative projects was created. This enables the integration of VGI with data coming from other sources, such as data collected by physical sensors in real time and made available through Applications Programming Interface (APIs, as well as, for example, official maps. The architecture of the created platform is described and its first prototype presented. Some example queries are performed and the results are analyzed.

Physics Division annual review, April 1, 1988--March 31, 1989

International Nuclear Information System (INIS)

Thayer, K.J.

1989-08-01

This document discusses the following main topics: Research at Atlas; Operation and Development of Atlas; Medium-Energy Nuclear Physics and Weak Interactions; Theoretical Nuclear Physics; Interactions of Fast Atomic and Molecular Ions with Solid and Gaseous Targets; Atomic Physics at Synchrotron Light Sources; Atomic Physics at Atlas and the ECR Source; Theoretical Atomic Physics; High-Resolution Laser-rf Spectroscopy of Atomic and Molecular Beams; and Fast Ion-Beam/Laser Studies of Atomic and Molecular Structure

Physics Division annual review, April 1, 1988--March 31, 1989

Energy Technology Data Exchange (ETDEWEB)

Thayer, K.J. (ed.)

1989-08-01

This document discusses the following main topics: Research at Atlas; Operation and Development of Atlas; Medium-Energy Nuclear Physics and Weak Interactions; Theoretical Nuclear Physics; Interactions of Fast Atomic and Molecular Ions with Solid and Gaseous Targets; Atomic Physics at Synchrotron Light Sources; Atomic Physics at Atlas and the ECR Source; Theoretical Atomic Physics; High-Resolution Laser-rf Spectroscopy of Atomic and Molecular Beams; and Fast Ion-Beam/Laser Studies of Atomic and Molecular Structure.

Department of Cosmic Radiation Physics - Overview

International Nuclear Information System (INIS)

Gawin, J.

1997-01-01

Full text: The Department of Cosmic Ray Physics in Lodz is involved in basic research in the area of high energy physics and cosmic ray physics related to: -Studies of the asymptotic properties of hadronic interactions from the analysis of cosmic ray propagation in the atmosphere. -Studies of structure and properties of Extensive Air Showers induced by cosmic ray particles. -Search for point sources of high energy cosmic rays. -Studies of cosmic ray propagation in the Galaxy and mechanisms of particle acceleration. -Studies of the mass composition of cosmic rays in the energy range 10 15 -10 17 eV. Theoretical and experimental studies of nuclear interactions for energies exceeding those obtained by modern particle accelerators are performed employing results obtained by the Lodz Extensive Air Shower Array. The Lodz hodoscope can register electromagnetic components of cosmic ray showers in the atmosphere as well as muons at two energy thresholds. Data collected by the Lodz array are also used to study mass composition of cosmic rays in the energy range 10 15 - 10 17 eV. The Lodz group collaborates with foreign institutes and laboratories on construction and data interpretation of cosmic ray experiments. Our most important partners are: Forschungszentrum Karlsruhe (Germany), College de France, the Institute for Nuclear Studies of the Russian Academy of Sciences, the University of Durham, and the University of Perpignan. (author)

Physical therapy clinic therapeutic ultrasound equipment as a source for bacterial contamination.

Science.gov (United States)

Spratt, Henry G; Levine, David; Tillman, Larry

2014-10-01

A procedure commonly used in physical therapy (PT) clinics is therapeutic ultrasound (US). This equipment and associated gel comes in contact with patient skin, potentially serving as a reservoir for bacteria. In this study, we sampled US heads, gel bottle tips and gel from nine outpatient PT clinics in Southeastern Tennessee. Samples were collected using sterile swabs. At the microbiology laboratory, these swabs were used to inoculate mannitol salt agar and CHROM-MRSA agar (for Staphylococcal species) and tryptic soy broth to determine non-specific bacterial contamination. US heads, gel bottle tips and gel had variable levels of contamination. Tips of gel bottles had the highest contamination, with 52.7% positive for non-specific bacterial contamination and 3.6% positive for methicillin-resistant Staphylococcus aureus (MRSA). Contamination of gel by non-specific bacteria was found in 14.5% of bottles sampled. US heads (35.5% of those sampled) had non-specific bacterial contamination, with no MRSA detected. Disinfecting US heads after initial swabbing resulted in removal of 90.9% of non-specific contamination. Gel storage at temperatures below 40 °C was found to encourage the growth of mesophilic bacteria. This study demonstrates the need for better cleaning and storage protocols for US heads and gel bottles in PT clinics.

Plasma physics studies in Singapore

International Nuclear Information System (INIS)

Jones, R.

1982-01-01

We briefly outline the plasma physics research program being conducted in the Department of Physics of the National University of Singapore. The work places particular emphasis on open system end plugging, ion source development, and anomalous transport studies. (author)

Molecular DNA identification of blood sources fed on, for Culicine mosquitoes (Diptera: Culicidae collected in the Songkhla province, southern Thailand

Directory of Open Access Journals (Sweden)

Theerakamol Pengsakul

2017-12-01

Full Text Available Culicine mosquitoes are medically important vectors. Therefore, mosquito control measures are a crucial strategy to interrupt disease transmission. Collection of data on mosquito feeding patterns is crucial for developing an effective vector control strategy. The objective of this study was to use molecular biology methods to identify the sources of DNA in mosquito blood meals. The DNA from blood meals in the mosquito stomachs was extracted and amplified with multiplex PCR, using specific primer sets based on the mitochondrial cytochrome b gene, to identify the DNA sources among human, pig, goat, dog, cow, and chicken. Among the 297 mosquito samples collected in the Songkhla province of Thailand, in Aedes spp. mosquitoes the percentages positive for human, dog, pig, chicken, cow, a mixture of 2 vertebrate DNAs, or of 3, and negative (no identified DNA were 61.90, 2.38, 2.38, 0.60, 0.60, 4.18, 1.20 and 26.79% respectively. In Culex spp. blood meals the rank order was different: fractions positive for chicken, human, dog, cow, goat, pig, a mixture of 2 or 3 vertebrate DNAs, and negative were 40.83, 10.00, 5.00, 4.17, 1.67, 0.83, 8.32, 3.32 and 25.83% respectively. This study shows that feeding behaviors of the two species differ, with most Aedes spp. blood meals containing human blood, while Culex spp. had primarily consumed chicken blood. An improved understanding of the feeding behaviors of mosquitoes could contribute to new, more effective strategies for the control of mosquito populations.

Principal and experimental study of source of polarized electrons

International Nuclear Information System (INIS)

Shang Rencheng; Gao Junfang; Xiao Yuan; Pang Wenning; Deng Jingkang

1999-01-01

The getting of polarized electrons was briefly introduced, that is the source of polarized electrons. The measurement of polarization in future, the application of polarized electrons in atomic and molecular physics, condensed physics, biological physics, nuclear and particle physics were discussed

Thesaurus-based search in large heterogeneous collections

NARCIS (Netherlands)

J. Wielemaker (Jan); M. Hildebrand (Michiel); J.R. van Ossenbruggen (Jacco); G. Schreiber (Guus); A. Sheth; not CWI et al

2008-01-01

htmlabstractIn cultural heritage, large virtual collections are coming into existence. Such collections contain heterogeneous sets of metadata and vocabulary concepts, originating from multiple sources. In the context of the E-Culture demonstrator we have shown earlier that such virtual

Culture collections.

Science.gov (United States)

Smith, David

2012-01-01

Culture collections no matter their size, form, or institutional objectives play a role in underpinning microbiology, supplying the resources for study, innovation, and discovery. Their basic roles include providing a mechanism for ex situ conservation of organisms; they are repositories for strains subject to publication, taking in safe, confidential, and patent deposits from researchers. They supply strains for use; therefore, the microorganisms provided must be authentic and preserved well, and any associated information must be valid and sufficient to facilitate the confirmation of their identity and to facilitate their use. The organisms must be collected in compliance with international conventions, international and national legislation and distributed to users indicating clearly the terms and conditions under which they are received and can be used. Collections are harmonizing approaches and characterizing strains to meet user needs. No one single collection can carry out this task alone, and therefore, it is important that output and strategy are coordinated to ensure culture collections deliver the basic resources and services microbiological innovation requires. This chapter describes the types of collection and how they can implement quality management systems and operate to deliver their basic functions. The links to information sources given not only provide support for the practitioners within collections but also provide guidance to users on accessing the huge resource available and how they can help ensure microbiology has the resources and a solid platform for future development. Copyright © 2012 Elsevier Inc. All rights reserved.

Space Drive Physics: Introduction and Next Steps

Science.gov (United States)

Millis, M. G.

Research toward the visionary goal of propellantless ``space drives'' is introduced, covering key physics issues and a listing of roughly 2-dozen approaches. The targeted advantage of a space drive is to circumvent the propellant constraints of rockets and the maneuvering limits of light sails by using the interactions between the spacecraft and its surrounding space for propulsion. At present, the scientific foundations from which to engineer a space drive have not been discovered and, objectively, might be impossible. Although no propulsion breakthroughs appear imminent, the subject has matured to where the relevant questions have been broached and are beginning to be answered. The critical make-break issues include; conservation of momentum, uncertain sources of reaction mass, and the net-external thrusting requirement. Note: space drives are not necessarily faster- than-light devices. Speed limits are a separate, unanswered issue. Relevant unsolved physics includes; the sources and mechanisms of inertial frames, coupling of gravitation and electromagnetism, and the nature of the quantum vacuum. The propulsion approaches span mostly stages 1 through 3 of the scientific method (defining the problem, collecting data, and articulating hypotheses), while some have matured to stage 4 (testing hypotheses). Nonviable approaches include `stiction drives,' `gyroscopic antigravity,' and `lifters.' No attempt is made to gauge the prospects of the remaining approaches. Instead, a list of next-step research questions is derived from the examination of these goals, unknowns, and concepts.

Orbit Display's Use of the Physics Application Framework

Energy Technology Data Exchange (ETDEWEB)

Zelazny, Michael; Chevtsov, Sergei; Chu, Chungming Paul; Fairley, Diane; Krejcik, Patrick; Natampalli, Partha; Rogind, Deborah; White, Greg; /SLAC

2009-12-09

At the SLAC National Accelerator Laboratory (SLAC) the Controls Department (CD) is developing a physics application framework based on the Java(tm) programming language developed by Sun Microsystems. This paper will discuss the first application developed using this approach: a new Orbit Display. The software is being developed by several individuals in reusable Java packages. It relies on the Experimental Physics and Industrial Control System (EPICS) toolkit for data collection and XAL - A Java based Hierarchy for Application Programming for model parameters. The Orbit Display tracks and displays electron paths through the Linac Coherent Light Source (LCLS) in both a graphical, beam line plot, and tabular format. It contains many features that may be unique to SLAC and is meant to be used both in the control room and by individuals in their offices or at home. Unique features include BSA Beam Synchronous Acquisition (BSA), Orbit Fitting, and Buffered Acquisition.

A comparison of physical self-concept between physical education and non-physical education university students

Directory of Open Access Journals (Sweden)

Hamid ARAZI

2013-06-01

Full Text Available The purpose of this study was to compare physical self-concept between physical education and non-physical education university students. The target population of this study was all male and female physical education and non-physical education university students in Rasht city of Iran. After translating the Physical Self-Description Questionnaire (PSDQ and adjusting some of the questions, the questionnaire was evaluated by the specialists in the context of validity and the reliability achieved by test-retest (Cronbach Alpha value of 0.84. We then, according to the Odineski table selected 180 physical education and non-physical education males and 190 physical education and non-physical education females opportunistically. The collected data was analyzed by 2×2 MANOVA for determine differences between genders and major. The results showed mean vector scores of physical education in the following scales: physical activity; global physical; competence; sports; strength; endurance and flexibility were significantly (p<0.05 higher than that of non-physical education major students. Also, the results shows that mean vector scores of male in the following scales: health; coordination; physical activity; body fat; global physical; competence; sports; global physical self-concept and global esteem were significantly (p<0.05 higher than female. Based on the result of our study the physical self-concept non-physical education and female is lower, than that physical education and male. The results may reflect that male and physical major education students, who usually spend more time on physical activity and sport training to have better fitness and skill oriented self concept than their counterparts.

Collective nuclear dynamics. Abstracts

International Nuclear Information System (INIS)

Abrosimov, V.I.; Kolomietz, V.M.

1994-01-01

The fourth International school on nuclear physics was help on 29 Aug - 7 Sep, 1994 in Ukraine. The specialists discussed following subjects: liquid drop and the shell correction method; nuclear deformation energy and fission; nuclear structure at high spins, superdeformed states, structure of excited and exotic nuclei; nuclear fluid dynamics and large scale collective motion; order and chaos as they relate to the collective motion; quantum and interference phenomena in nuclear collisions; quasi-fission and multinucleon fragmentation effects; shell effects in non-nuclear systems; new nuclear facilities

Collective nuclear dynamics. Proceedings

International Nuclear Information System (INIS)

Ivanyuk, F.A.

1994-01-01

The Fourth International school on nuclear physics was help on 29 Aug - 7 Sep, 1994 in Ukraine. The specialists discussed following subjects:liquid drop and the shell correction method; nuclear deformation energy and fission; nuclear structure at high spins, superdeformed states, structure of excited and exotic nuclei; nuclear fluid dynamics and large scale collective motion; order and chaos as they relate to the collective motion; quantum and interference phenomena in nuclear collisions; quasi-fission and multinucleon fragmentation effects; shell effects in non-nuclear systems; new nuclear facilities

Collective nuclear dynamics. Proceedings.

Energy Technology Data Exchange (ETDEWEB)

Ivanyuk, F A [eds.

1994-12-31

The Fourth International school on nuclear physics was help on 29 Aug - 7 Sep, 1994 in Ukraine. The specialists discussed following subjects:liquid drop and the shell correction method; nuclear deformation energy and fission; nuclear structure at high spins, superdeformed states, structure of excited and exotic nuclei; nuclear fluid dynamics and large scale collective motion; order and chaos as they relate to the collective motion; quantum and interference phenomena in nuclear collisions; quasi-fission and multinucleon fragmentation effects; shell effects in non-nuclear systems; new nuclear facilities.

Open source development

DEFF Research Database (Denmark)

Ulhøi, John Parm

2004-01-01

This paper addresses innovations based on open source or non-proprietary knowledge. Viewed through the lens of private property theory, such agency appears to be a true anomaly. However, by a further turn of the theoretical kaleidoscope, we will show that there may be perfectly justifiable reasons...... for not regarding open source innovations as anomalies. The paper is based on three sectorial and generic cases of open source innovation, which is an offspring of contemporary theory made possible by combining elements of the model of private agency with those of the model of collective agency. In closing...

Quantitative analysis of bloggers' collective behavior powered by emotions

Science.gov (United States)

Mitrović, Marija; Paltoglou, Georgios; Tadić, Bosiljka

2011-02-01

Large-scale data resulting from users' online interactions provide the ultimate source of information to study emergent social phenomena on the Web. From individual actions of users to observable collective behaviors, different mechanisms involving emotions expressed in the posted text play a role. Here we combine approaches of statistical physics with machine-learning methods of text analysis to study the emergence of emotional behavior among Web users. Mapping the high-resolution data from digg.com onto bipartite networks of users and their comments onto posted stories, we identify user communities centered around certain popular posts and determine emotional contents of the related comments by the emotion classifier developed for this type of text. Applied over different time periods, this framework reveals strong correlations between the excess of negative emotions and the evolution of communities. We observe avalanches of emotional comments exhibiting significant self-organized critical behavior and temporal correlations. To explore the robustness of these critical states, we design a network-automaton model on realistic network connections and several control parameters, which can be inferred from the dataset. Dissemination of emotions by a small fraction of very active users appears to critically tune the collective states.

A comprehensive waste collection cost model applied to post-consumer plastic packaging waste

NARCIS (Netherlands)

Groot, J.J.; Bing, X.; Bos-Brouwers, H.E.J.; Bloemhof, J.M.

2014-01-01

Post-consumer plastic packaging waste (PPW) can be collected for recycling via source separation or post-separation. In source separation, households separate plastics from other waste before collection, whereas in post-separation waste is separated at a treatment centre after collection. There are

Space Physics Data Facility Web Services

Science.gov (United States)

Candey, Robert M.; Harris, Bernard T.; Chimiak, Reine A.

2005-01-01

The Space Physics Data Facility (SPDF) Web services provides a distributed programming interface to a portion of the SPDF software. (A general description of Web services is available at http://www.w3.org/ and in many current software-engineering texts and articles focused on distributed programming.) The SPDF Web services distributed programming interface enables additional collaboration and integration of the SPDF software system with other software systems, in furtherance of the SPDF mission to lead collaborative efforts in the collection and utilization of space physics data and mathematical models. This programming interface conforms to all applicable Web services specifications of the World Wide Web Consortium. The interface is specified by a Web Services Description Language (WSDL) file. The SPDF Web services software consists of the following components: 1) A server program for implementation of the Web services; and 2) A software developer s kit that consists of a WSDL file, a less formal description of the interface, a Java class library (which further eases development of Java-based client software), and Java source code for an example client program that illustrates the use of the interface.

Physics To Go: an Outreach Digital Library

Science.gov (United States)

Lee, Edward V.

2006-12-01

Physics to Go, part of the NSF-funded ComPADRE digital library, is a collection of websites for informal physics learning. This talk will present Physics To Go’s homepage features, show how these features are created, how resources are identified, and how Physics To Go complements other physics outreach websites.

Fundamental movement skills and physical fitness as predictors of physical activity: A 6-year follow-up study.

Science.gov (United States)

Jaakkola, T; Yli-Piipari, S; Huotari, P; Watt, A; Liukkonen, J

2016-01-01

The purpose of this study was to examine the extent to which fundamental movement skills and physical fitness scores assessed in early adolescence predict self-reported physical activity assessed 6 years later. The sample comprised 333 (200 girls, 133 boys; M age = 12.41) students. The effects of previous physical activity, sex, and body mass index (BMI) were controlled in the main analyses. Adolescents' fundamental movement skills, physical fitness, self-report physical activity, and BMI were collected at baseline, and their self-report energy expenditure (metabolic equivalents: METs) and intensity of physical activity were collected using the International Physical Activity Questionnaire 6 years later. Results showed that fundamental movement skills predicted METs, light, moderate, and vigorous intensity physical activity levels, whereas fitness predicted METs, moderate, and vigorous physical activity levels. Hierarchical regression analyses also showed that after controlling for previous levels of physical activity, sex, and BMI, the size of the effect of fundamental movement skills and physical fitness on energy expenditure and physical activity intensity was moderate (R(2) change between 0.06 and 0.15), with the effect being stronger for high intensity physical activity. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Online Sources for Competitor Information.

Science.gov (United States)

Weiss, Arthur

Competitor information gathering is a key aspect of business planning. Information can be collected from either published or unpublished sources. Unpublished information will often be verified based on material from published sources. Published information is more likely to be factual and includes financial, stockmarket, press, market and…

Neutron sources and applications

Energy Technology Data Exchange (ETDEWEB)

Price, D.L. [ed.] [Argonne National Lab., IL (United States); Rush, J.J. [ed.] [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

1994-01-01

Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications.

Neutron sources and applications

International Nuclear Information System (INIS)

Price, D.L.; Rush, J.J.

1994-01-01

Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications

Project X and its connection to neutrino physics

International Nuclear Information System (INIS)

Harris, Deborah; Jansson, Andreas

2008-01-01

Project X is a new high intensity proton source that is being planned at Fermilab to usher in a new era of high intensity physics. The high intensity frontier can provide a wealth of new measurements--the most voracious consumer of protons is the long baseline neutrino program, but with the proton source upgrades being planned there are even more protons available than current neutrino targets can withstand. Those protons can provide a rich program on their own of muon physics and neutrino scattering physics that is complimentary to the long baseline program. In this article we discuss the physics motivation for Project X that comes from these short baseline experiments, and also the status of the design of this new source and what it will take to move forward on that design

The temporary international collective chronicle

International Nuclear Information System (INIS)

Kravchenko, Yu.Ya.

2007-01-01

The temporary international collective brief history is presented from the time of its establishment in 1972 (and even earlier) till the termination of its activity in 1990 (and even later). Works in the temporary international collective framework demonstrate an example of successful cooperation of specialists from different countries in the field of calculation-theoretical and experimental research on the WWER reactor physics. The results of experimental and calculation studies were reported to the topical meetings, workshops, conferences, and symposia as well as were published in the temporary international collective reports and proceedings. The answers to the questions about the temporary international collective activity-What? Where? When?-are presented in this chronicle (Authors)

Collective ion acceleration by means of virtual cathodes

International Nuclear Information System (INIS)

Peter, W.; Faehl, R.J.; Snell, C.; Jones, M.E.

1985-01-01

Experiments on collective ion acceleration by means of the formation of a virtual cathode have been carried out for a number of years in the Soviet Union and in the United States. Recently, there has been renewed interest in the subject as a possible means of accelerating ions to very high energies. By understanding the physics underlying the acceleration process it may be possible to determine the feasibility of virtual cathode staging for very high energy ion production. For this reason, a theoretical and computational effort is underway at Los Alamos in order to clarify the basic issues of collective ion acceleration by means of virtual cathodes. To support the theoretical effort, simulations were done with the fully electromagnetic and relativistic particle-in-cell code ISIS (in a one-dimensional mode) and the electrostatic one-dimensional code BIGONE. In the simulations, an electron beam of density 6 x 10 11 cm -3 is injected into a one-dimensional box of length L. To supply the necessary ions for collective acceleration, a plasma source containing both ions and electrons was initialized near the emitting boundary. Of prime interest in this study was to understand the dynamics of virtual cathode formation and the dynamics of the acceleration process for the ions. In particular, the question of whether the ions are accelerated by a moving potential well or hydrodynamic pressure due to ambipolar expansion is of primary interest. 3 refs., 5 figs

IV International Conference on Computer Algebra in Physical Research. Collection of abstracts

International Nuclear Information System (INIS)

Rostovtsev, V.A.

1990-01-01

The abstracts of the reports made on IV International conference on computer algebra in physical research are presented. The capabilities of application of computers for algebraic computations in high energy physics and quantum field theory are discussed. Particular attention is paid to a software for the REDUCE computer algebra system

Physics to a degree

CERN Document Server

Thomas, EG

2014-01-01

Physics to a Degree provides an extensive collection of problems suitable for self-study or tutorial and group work at the level of an undergraduate physics course. This novel set of exercises draws together the core elements of an undergraduate physics degree and provides students with the problem solving skills needed for general physics' examinations and for real-life situations encountered by the professional physicist. Topics include force, momentum, gravitation, Bernoulli's Theorem, magnetic fields, blackbody radiation, relativistic travel, mechanics near the speed of light, radioactive

Ion source requirements for pulsed spallation neutron sources

International Nuclear Information System (INIS)

Alonso, J.R.

1996-01-01

The neutron scattering community has endorsed the need for a high-power (1 to 5 MW) accelerator-driven source of neutrons for materials research. Properly configured, the accelerator could produce very short (sub-microsecond) bursts of cold neutrons, said time structure offering advantages over the continuous flux from a reactor for a large class of experiments. The recent cancellation of the ANS reactor project has increased the urgency to develop a comprehensive strategy based on the best technological scenarios. Studies to date have built on the experience from ISIS (the 160 kW source in the UK), and call for a high-current (approx. 100 mA peak) H - source-linac combination injecting into one or more accumulator rings in which beam may be further accelerated. The 1 to 5 GeV proton beam is extracted in a single turn and brought to the target-moderator stations. The high current, high duty-factor, high brightness and high reliability required of the ion source present a very large challenge to the ion source community. A workshop held in Berkeley in October 1994, analyzed in detail the source requirements for proposed accelerator scenarios, the present performance capabilities of different H - source technologies, and identified necessary R ampersand D efforts to bridge the gap. copyright 1996 American Institute of Physics

Source formulation for electron-impact ionization for fluid plasma simulations

DEFF Research Database (Denmark)

Müller, S.H.; Holland, C.; Tynan, G.R.

2009-01-01

The derivation of the correct functional form of source terms in plasma fluid theory is revisited. The relation between the fluid source terms and atomic physics differential cross sections is established for particle-impact ionization. It is shown that the interface between atomic and plasma phy...... electron temperature regimes in a wide variety of basic plasma physics experiments, including the trends across different gases.......The derivation of the correct functional form of source terms in plasma fluid theory is revisited. The relation between the fluid source terms and atomic physics differential cross sections is established for particle-impact ionization. It is shown that the interface between atomic and plasma...... physics is completely described by three scalar functions of the incident particle energy. These are the total cross section and the newly introduced forward momentum and energy functions, which are properties of the differential cross sections only. For electron-impact ionization, the binary...

Requirements of radiation protection and physical protection for facilities of petroleum well logging

International Nuclear Information System (INIS)

Goessa, Eunícia João

2017-01-01

Petroleum is generated from the transformation of the organic matter accumulated in the sedimentary rocks, when submitted to the appropriate thermal conditions and is found both in the marine and terrestrial subsoil. In order to determine the volume of petroleum existing in a deposit oil wells technique is used which consists of a set of operations in which are recorded as a function of the depth, some characteristics of the geological layers along the well, such as permeability and porosity with the use of radioactive sources. The sources used in this practice belong to category 3, among five categories of categorization considered dangerous and in case of accident represents a higher level of radiological risk. The present work aims to present the main requirements of radiological safety and physical security to be applied in the licensing of an oil well profiling plant. In this work, the author supported the bibliographical review, which consisted in the collection of the essential literature related to the theme. The literature is composed of theoretical references published in books, theses, Brazilian norms, Mozambican laws, IAEA manuals and some published on the internet. The methodology used in this work was the bibliographical review with the objective of obtaining information on the formation of oil, oil well profiling concept, the radioactive sources used in this practice, for information on the main applicable radiological security and safety requirements radioactive sources and oil well profiling facilities. The inventory of radioactive sources, the use of shielding and the smear tests in radioactive sources are technical requirements that integrate the radiological safety and physical safety that must be followed by the licensees of the oil well profiling. (author). (author)

New Physics at the LHC: A Les Houches Report. Physics at Tev Colliders 2007 - New Physics Working Group

Energy Technology Data Exchange (ETDEWEB)

Brooijmans, Gustaaf H.; /Columbia U.; Delgado, A.; /Notre Dame U.; Dobrescu, Bogdan A.; /Fermilab; Grojean, C.; /CERN /Saclay, SPhT; Narain, Meenakshi; /Brown U.; Alwall, Johan; /SLAC; Azuelos, Georges; /Montreal U. /TRIUMF; Black, K.; /Harvard U.; Boos, E.; /SINP, Moscow; Bose, Tulika; /Brown U.; Bunichev, V.; /SINP, Moscow; Chivukula, R.S.; /Michigan State U.; Contino, R.; /CERN; Djouadi, A.; /Louis Pasteur U., Strasbourg I /Orsay, LAL; Dudko, Lev V.; /Durham U.; Ferland, J.; /Montreal U.; Gershtein, Yuri S.; /Florida State U.; Gigg, M.; /Durham U.; Gonzalez de la Hoz, S.; /Valencia U., IFIC; Herquet, M.; /Louvain U.; Hirn, J.; /Yale U. /Brown U. /Boston U. /Annecy, LAPTH /INFN, Turin /Valencia U., IFIC /Yale U. /Arizona U. /Louis Pasteur U., Strasbourg I /Orsay, LAL /KEK, Tsukuba /Moscow State U. /Lisbon, LIFEP /CERN /Durham U. /Valencia U., IFIC /Sao Paulo, IFT /Fermilab /Zurich, ETH /Boston U. /DESY /CERN /Saclay, SPhT /Durham U. /Cambridge U. /Michigan State U. /Louis Pasteur U., Strasbourg I /Orsay, LAL /Annecy, LAPTH /Fermilab /CERN /Arizona U. /Northwestern U. /Argonne /Kyoto U. /Valencia U., IFIC /UC, Berkeley /LBL, Berkeley

2011-12-05

We present a collection of signatures for physics beyond the standard model that need to be explored at the LHC. The signatures are organized according to the experimental objects that appear in the final state, and in particular the number of high p{sub T} leptons. Our report, which includes brief experimental and theoretical reviews as well as original results, summarizes the activities of the 'New Physics' working group for the 'Physics at TeV Colliders' workshop (Les Houches, France, 11-29 June, 2007).

The SLAC polarized electron source

International Nuclear Information System (INIS)

Clendenin, J.E.; Alley, R.; Frisch, J.; Kotseroglou, T.; Mulhollan, G.; Schultz, D.; Tang, H.; Turner, J.; Yeremian, A.D.

1997-08-01

Since 1992, the SLAC 3-km linac has operated exclusively with polarized electrons. The polarized electron source is highly reliable, remotely operated and monitored, and able to produce a variety of electron bunch profiles for high-energy physics experiments. The source and its operating characteristics are described. Some implications drawn from the operating experience are discussed

Source-Independent Quantum Random Number Generation

Science.gov (United States)

Cao, Zhu; Zhou, Hongyi; Yuan, Xiao; Ma, Xiongfeng

2016-01-01

Quantum random number generators can provide genuine randomness by appealing to the fundamental principles of quantum mechanics. In general, a physical generator contains two parts—a randomness source and its readout. The source is essential to the quality of the resulting random numbers; hence, it needs to be carefully calibrated and modeled to achieve information-theoretical provable randomness. However, in practice, the source is a complicated physical system, such as a light source or an atomic ensemble, and any deviations in the real-life implementation from the theoretical model may affect the randomness of the output. To close this gap, we propose a source-independent scheme for quantum random number generation in which output randomness can be certified, even when the source is uncharacterized and untrusted. In our randomness analysis, we make no assumptions about the dimension of the source. For instance, multiphoton emissions are allowed in optical implementations. Our analysis takes into account the finite-key effect with the composable security definition. In the limit of large data size, the length of the input random seed is exponentially small compared to that of the output random bit. In addition, by modifying a quantum key distribution system, we experimentally demonstrate our scheme and achieve a randomness generation rate of over 5 ×103 bit /s .

Final Report on DTRA Basic Research Project #BRCALL08-Per3-C-2-0006 "High-Z Non-Equilibrium Physics and Bright X-ray Sources with New Laser Targets"

Energy Technology Data Exchange (ETDEWEB)

Colvin, Jeffrey D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-06-01

This project had two major goals. Final Goal: obtain spectrally resolved, absolutely calibrated x-ray emission data from uniquely uniform mm-scale near-critical-density high-Z plasmas not in local thermodynamic equilibrium (LTE) to benchmark modern detailed atomic physics models. Scientific significance: advance understanding of non-LTE atomic physics. Intermediate Goal: develop new nano-fabrication techniques to make suitable laser targets that form the required highly uniform non-LTE plasmas when illuminated by high-intensity laser light. Scientific significance: advance understanding of nano-science. The new knowledge will allow us to make x-ray sources that are bright at the photon energies of most interest for testing radiation hardening technologies, the spectral energy range where current x-ray sources are weak. All project goals were met.

Physic nut (Jatropha curcas):

African Journals Online (AJOL)

else

Hence a serious of silvicultural and genotype testing have been carried out in the Central Rift Valley of. Ethiopia. The result indicated that physic nut has a very narrow genetic ... physic nut as a source of raw material for biodiesel industry. .... such level of seed yield per hectare was achieved through good management and.

Annual seminar on electronic sources of information

International Nuclear Information System (INIS)

Ravichandra Rao, I.K.

2000-03-01

With the rapid development in IT and the emergence of Internet, a multitude of information sources are now available on electronic media. They include e-journals and other electronic publications - online databases, reference documents, newspapers, magazines, etc. In addition to these online sources, there are thousands of CD-ROM databases. The CD-ROM databases and the online sources are collectively referred to as electronic sources of information. Libraries in no part of the world can afford to ignore these sources. Emergence of these new sources has resulted into a change in the traditional library functions including collection development, acquisitions, cataloguing, user instructions, etc. It is inevitable that in the next five to ten years, special libraries may have to allocate considerable amount towards subscription of e-journals and other e-publications. The papers in this seminar volume discuss several aspects related the theme of the seminar and cover e-journals, different sources available in the Net, classification of electronic sources, online public access catalogues, and different aspects of Internet. Papers relevant to INIS are indexed separately

Making a Business out of Open Source

CERN Multimedia

CERN. Geneva

2007-01-01

Marc Fleury, a physicist by training, retired in his thirties after selling the company JBoss, which made an open-source application server, to Red Hat. He will talk about the various business models of open source software. From leveraging available open source software and casual contributions, to on-ramp models and subscription models, various business models have been explored and function. Not all models work for all software fields and business types. He will review those business models in context and survey "state-of-the-art" economic models for open source software production. Speaker Bio: Marc Fleury is the creator of JBoss, an open-source Java application server. Fleury holds a degree in mathematics and a Doctorate in physics from the École Polytechnique in Paris and a Master in Theoretical Physics from the École Normale. He worked in France for Sun Microsystems before moving to the United States where he has worked on various Java projects. Fleury's research interest focused on middleware, a...

Statistical and physical evolution of QSO's

International Nuclear Information System (INIS)

Caditz, D.; Petrosian, V.

1989-09-01

The relationship between the physical evolution of discrete extragalactic sources, the statistical evolution of the observed population of sources, and the cosmological model is discussed. Three simple forms of statistical evolution: pure luminosity evolution (PLE), pure density evolution (PDE), and generalized luminosity evolution (GLE), are considered in detail together with what these forms imply about the physical evolution of individual sources. Two methods are used to analyze the statistical evolution of the observed distribution of QSO's (quasars) from combined flux limited samples. It is shown that both PLE and PDE are inconsistent with the data over the redshift range 0 less than z less than 2.2, and that a more complicated form of evolution such as GLE is required, independent of the cosmological model. This result is important for physical models of AGN, and in particular, for the accretion disk model which recent results show may be inconsistent with PLE

Optimization of municipal solid waste collection and transportation routes.

Science.gov (United States)

Das, Swapan; Bhattacharyya, Bidyut Kr

2015-09-01

Optimization of municipal solid waste (MSW) collection and transportation through source separation becomes one of the major concerns in the MSW management system design, due to the fact that the existing MSW management systems suffer by the high collection and transportation cost. Generally, in a city different waste sources scatter throughout the city in heterogeneous way that increase waste collection and transportation cost in the waste management system. Therefore, a shortest waste collection and transportation strategy can effectively reduce waste collection and transportation cost. In this paper, we propose an optimal MSW collection and transportation scheme that focus on the problem of minimizing the length of each waste collection and transportation route. We first formulize the MSW collection and transportation problem into a mixed integer program. Moreover, we propose a heuristic solution for the waste collection and transportation problem that can provide an optimal way for waste collection and transportation. Extensive simulations and real testbed results show that the proposed solution can significantly improve the MSW performance. Results show that the proposed scheme is able to reduce more than 30% of the total waste collection path length. Copyright © 2015 Elsevier Ltd. All rights reserved.

Imitation simulation of collective acquisition systems for nuclear-physical data

International Nuclear Information System (INIS)

Ryabov, Yu.F.; Khomutnikov, V.P.

1981-01-01

The imitation simulation method of collective investigation systems (CIS) oriented to the acquisition and express-processing of experiments performed on the basis of multi-beam research reactors under film data measurements by means of semiautomatic installations is described. The method is based on description of specific requests to the system as service phase sequences (small computer data acquisition, mass transfer in CIS, data bank record processing). The algorithm basis of these phases performed is delay imitation at each of the means employed. The structure of the simulating program is presented. The complex of programs is realized on the base of the NOST program packet for the M-4030 computer. Its efficiency in collective multiprogram systems investigation is shown [ru

NEAR FIELD MODELING OF SPE1 EXPERIMENT AND PREDICTION OF THE SECOND SOURCE PHYSICS EXPERIMENTS (SPE2)

Energy Technology Data Exchange (ETDEWEB)

Antoun, T; Xu, H; Vorobiev, O; Lomov, I

2011-10-20

Motion along joints and fractures in the rock has been proposed as one of the sources of near-source shear wave generation, and demonstrating the validity of this hypothesis is a focal scientific objective of the source physics experimental campaign in the Climax Stock granitic outcrop. A modeling effort has been undertaken by LLNL to complement the experimental campaign, and over the long term provide a validated computation capability for the nuclear explosion monitoring community. The approach involves performing the near-field nonlinear modeling with hydrodynamic codes (e.g., GEODYN, GEODYN-L), and the far-field seismic propagation with an elastic wave propagation code (e.g., WPP). the codes will be coupled together to provide a comprehensive source-to-sensor modeling capability. The technical approach involves pre-test predictions of each of the SPE experiments using their state of the art modeling capabilities, followed by code improvements to alleviate deficiencies identified in the pre-test predictions. This spiral development cycle wherein simulations are used to guide experimental design and the data from the experiment used to improve the models is the most effective approach to enable a transition from the descriptive phenomenological models in current use to the predictive, hybrid physics models needed for a science-based modeling capability for nuclear explosion monitoring. The objective of this report is to describe initial results of non-linear motion predictions of the first two SPE shots in the Climax Stock: a 220-lb shot at a depth of 180 ft (SPE No.1), and a 2570-lb shot at a depth of 150 ft (SPE No.2). The simulations were performed using the LLNL ensemble granite model, a model developed to match velocity and displacement attenuation from HARDHAT, PILE DRIVER, and SHOAL, as well as Russian and French nuclear test data in granitic rocks. This model represents the state of the art modeling capabilities as they existed when the SPE campaign was

Explosion Generated Seismic Waves and P/S Methods of Discrimination from Earthquakes with Insights from the Nevada Source Physics Experiments

Science.gov (United States)

Walter, W. R.; Ford, S. R.; Pitarka, A.; Pyle, M. L.; Pasyanos, M.; Mellors, R. J.; Dodge, D. A.

2017-12-01

The relative amplitudes of seismic P-waves to S-waves are effective at identifying underground explosions among a background of natural earthquakes. These P/S methods appear to work best at frequencies above 2 Hz and at regional distances ( >200 km). We illustrate this with a variety of historic nuclear explosion data as well as with the recent DPRK nuclear tests. However, the physical basis for the generation of explosion S-waves, and therefore the predictability of this P/S technique as a function of path, frequency and event properties such as size, depth, and geology, remains incompletely understood. A goal of current research, such as the Source Physics Experiments (SPE), is to improve our physical understanding of the mechanisms of explosion S-wave generation and advance our ability to numerically model and predict them. The SPE conducted six chemical explosions between 2011 and 2016 in the same borehole in granite in southern Nevada. The explosions were at a variety of depths and sizes, ranging from 0.1 to 5 tons TNT equivalent yield. The largest were observed at near regional distances, with P/S ratios comparable to much larger historic nuclear tests. If we control for material property effects, the explosions have very similar P/S ratios independent of yield or magnitude. These results are consistent with explosion S-waves coming mainly from conversion of P- and surface waves, and are inconsistent with source-size based models. A dense sensor deployment for the largest SPE explosion allowed this conversion to be mapped in detail. This is good news for P/S explosion identification, which can work well for very small explosions and may be ultimately limited by S-wave detection thresholds. The SPE also showed explosion P-wave source models need to be updated for small and/or deeply buried cases. We are developing new P- and S-wave explosion models that better match all the empirical data. Historic nuclear explosion seismic data shows that the media in which

AGS polarized H- source

International Nuclear Information System (INIS)

Kponou, A.; Alessi, J.G.; Sluyters, T.

1985-01-01

The AGS polarized H - source is now operational. During a month-long experimental physics run in July 1984, pulses equivalent to 15 μA x 300 μs (approx. 3 x 10 10 protons) were injected into the RFQ preaccelerator. Beam polarization, measured at 200 MeV, was approx. 75%. After the run, a program to increase the H - yield of the source was begun and significant progress has been made. The H - current is now frequently 20 to 30 μA. A description of the source and some details of our operating experience are given. We also briefly describe the improvement program