Sustainable production of wood and non-wood forest products

Science.gov (United States)

Ellen M. Donoghue; Gary L. Benson; James L. Chamberlain

2003-01-01

The International Union of Forest Research Organizations (IUFRO) All Divisions 5 Conference in Rotorua, New Zealand, March 11-15, 2003, focused on issues surrounding sustainable foest management and forest products research. As the conference title "Forest Products Research: Providing for Sustainable Choices" suggests, the purpose of the conference was to...

Historic Emissions from Deforestation and Forest Degradation in Mato Grosso, Brazil: 1. Source Data Uncertainties

Science.gov (United States)

Morton, Douglas C.; Sales, Marcio H.; Souza, Carlos M., Jr.; Griscom, Bronson

2011-01-01

Historic carbon emissions are an important foundation for proposed efforts to Reduce Emissions from Deforestation and forest Degradation and enhance forest carbon stocks through conservation and sustainable forest management (REDD+). The level of uncertainty in historic carbon emissions estimates is also critical for REDD+, since high uncertainties could limit climate benefits from mitigation actions. Here, we analyzed source data uncertainties based on the range of available deforestation, forest degradation, and forest carbon stock estimates for the Brazilian state of Mato Grosso during 1990-2008. Results: Deforestation estimates showed good agreement for multi-year trends of increasing and decreasing deforestation during the study period. However, annual deforestation rates differed by >20% in more than half of the years between 1997-2008, even for products based on similar input data. Tier 2 estimates of average forest carbon stocks varied between 99-192 Mg C/ha, with greatest differences in northwest Mato Grosso. Carbon stocks in deforested areas increased over the study period, yet this increasing trend in deforested biomass was smaller than the difference among carbon stock datasets for these areas. Conclusions: Patterns of spatial and temporal disagreement among available data products provide a roadmap for future efforts to reduce source data uncertainties for estimates of historic forest carbon emissions. Specifically, regions with large discrepancies in available estimates of both deforestation and forest carbon stocks are priority areas for evaluating and improving existing estimates. Full carbon accounting for REDD+ will also require filling data gaps, including forest degradation and secondary forest, with annual data on all forest transitions.

Missing Peroxy Radical Sources Within a Rural Forest Canopy

Science.gov (United States)

Wolfe, G. M.; Cantrell, C.; Kim, S.; Mauldin, R. L., III; Karl, T.; Harley, P.; Turnipseed, A.; Zheng, W.; Flocke, F.; Apel, E. C.;

Potential for forest products in interior Alaska.

Science.gov (United States)

George R. Sampson; Willem W.S. van Hees; Theodore S. Setzer; Richard C. Smith

1988-01-01

Future opportunities for producing Alaska forest products were examined from the perspective of timber supply as reported in timber inventory reports and past studies of forest products industry potential. The best prospects for increasing industrial production of forest products in interior Alaska are for softwood lumber. Current softwood lumber production in the...

Bee pollen as non-wood forest product in the eastern Andean highlands of Colombia

Directory of Open Access Journals (Sweden)

Fermín José Chamorro García

2013-07-01

Full Text Available The Andean forests of the Eastern Andean high-lands of Colombia have a high conservation priority given the vulnerable condition of species such as Quercus humboldtii (Fagaceae that inhabit these ecosystems. Beekeeping is regarded as an alternative activity that could play a role in the conservation of Andean forests, but little is known about how the floras of these ecosystems contribute to honey and bee pollen production. We analyzed the contribution of Andean forests to bee pollen production, given the productive potential and commercial importance of this product. Pollen analyses were performed on 25 samples from apiaries near Andean forests located in the states of Cundinamarca, Boyacá and Santander. We found that Q. humboldtii is an important source of pollen with high potential for monofloral bee pollen production. In addition, bees collect pollen from other Andean forests species such as Weinmannia tomentosa, Viburnum spp. and Morella spp. Utilization of bee pollen could lead to incentives to carry out forest conservation practices through beekeeping management.

Forest ecosystem services: Provisioning of non-timber forest products

Science.gov (United States)

James L. Chamberlain; Gregory E. Frey; C. Denise Ingram; Michael G. Jacobson; Cara Meghan Starbuck Downes

2017-01-01

The purpose of this chapter is to describe approaches to calculate a conservative and defensible estimate of the marginal value of forests for non-timber forest products (NTFPs). 'Provisioning" is one of four categories of benefits, or services that ecosystems provide to humans and was described by the Millennium Ecosystem Assessment as 'products...

Water use sources of desert riparian Populus euphratica forests.

Science.gov (United States)

Si, Jianhua; Feng, Qi; Cao, Shengkui; Yu, Tengfei; Zhao, Chunyan

2014-09-01

Desert riparian forests are the main body of natural oases in the lower reaches of inland rivers; its growth and distribution are closely related to water use sources. However, how does the desert riparian forest obtains a stable water source and which water sources it uses to effectively avoid or overcome water stress to survive? This paper describes an analysis of the water sources, using the stable oxygen isotope technique and the linear mixed model of the isotopic values and of desert riparian Populus euphratica forests growing at sites with different groundwater depths and conditions. The results showed that the main water source of Populus euphratica changes from water in a single soil layer or groundwater to deep subsoil water and groundwater as the depth of groundwater increases. This appears to be an adaptive selection to arid and water-deficient conditions and is a primary reason for the long-term survival of P. euphratica in the desert riparian forest of an extremely arid region. Water contributions from the various soil layers and from groundwater differed and the desert riparian P. euphratica forests in different habitats had dissimilar water use strategies.

Connecting non-timber forest products stakeholders to information and knowledge: A case study of an Internet web site

Science.gov (United States)

James Chamberlain; Matt Winn; A.L. Hammett

2009-01-01

Many products are harvested from forests that are not timber-based but are based on plant materials. These non-timber forest products (NTFPs) have not been fully incorporated into economic development programs, yet they provide significant monetary benefits for rural entrepreneurs. Interest in NTFPs as alternative forest enterprises and sources of additional income has...

International Trade In Forest Products

Science.gov (United States)

Jeffrey P. Prestemon; Joseph Buongiomo; David N. Wear; Jacek P. Siry

2003-01-01

The 21st century continues a trend of rapid growth in both international trade of forest products and a concern for forests. These two trends are connected. Forces causing trade growth are linked to the loss of native forest resources in some countries and the accumulation of nonnative forest resources in other countries. Factors increasing trade...

Nitrogen enrichment regulates calcium sources in forests

Science.gov (United States)

Hynicka, Justin D.; Pett-Ridge, Julie C.; Perakis, Steven

2016-01-01

Nitrogen (N) is a key nutrient that shapes cycles of other essential elements in forests, including calcium (Ca). When N availability exceeds ecosystem demands, excess N can stimulate Ca leaching and deplete Ca from soils. Over the long term, these processes may alter the proportion of available Ca that is derived from atmospheric deposition vs. bedrock weathering, which has fundamental consequences for ecosystem properties and nutrient supply. We evaluated how landscape variation in soil N, reflecting long-term legacies of biological N fixation, influenced plant and soil Ca availability and ecosystem Ca sources across 22 temperate forests in Oregon. We also examined interactions between soil N and bedrock Ca using soil N gradients on contrasting basaltic vs. sedimentary bedrock that differed 17-fold in underlying Ca content. We found that low-N forests on Ca-rich basaltic bedrock relied strongly on Ca from weathering, but that soil N enrichment depleted readily weatherable mineral Ca and shifted forest reliance toward atmospheric Ca. Forests on Ca-poor sedimentary bedrock relied more consistently on atmospheric Ca across all levels of soil N enrichment. The broad importance of atmospheric Ca was unexpected given active regional uplift and erosion that are thought to rejuvenate weathering supply of soil minerals. Despite different Ca sources to forests on basaltic vs. sedimentary bedrock, we observed consistent declines in plant and soil Ca availability with increasing N, regardless of the Ca content of underlying bedrock. Thus, traditional measures of Ca availability in foliage and soil exchangeable pools may poorly reflect long-term Ca sources that sustain soil fertility. We conclude that long-term soil N enrichment can deplete available Ca and cause forests to rely increasingly on Ca from atmospheric deposition, which may limit ecosystem Ca supply in an increasingly N-rich world.

Polychlorinated naphthalenes (PCNs) in Chinese forest soil: Will combustion become a major source?

International Nuclear Information System (INIS)

Xu, Yue; Li, Jun; Zheng, Qian; Pan, Suhong; Luo, Chunling; Zhu, Haolin; Nizzetto, Luca; Zhang, Gan

2015-01-01

We collected O- and A-horizon soil samples in 26 Chinese mountainous forests to investigate the content, spatial pattern, and potential sources of polychlorinated naphthalenes (PCNs). Spatial patterns were influenced mainly by the approximation to sources and soil organic contents. High concentrations often occurred close to populated or industrialized areas. Combustion-related activities contributed to PCN pollution. Relatively high proportions of CN-73 in northern China may be attributed to coke consumption, while CN-51 could be an indicator of biomass burning in Southwest China. There are evidences that PCNs may largely derived from unintentional production. If uncontrolled, UP-PCN (unintentionally produced PCNs) emissions could increase with industrial development. The abnormally high concentrations at Gongga and Changbai Mountains appear to be associated with the high efficient of forest filter of atmospheric contaminants at these densely forested sites. We question whether this is caused by ecotones between forests, and raise additional questions for future analyses. - Highlights: • PCNs were measured in the O- and A-horizon soil of Chinese mountainous forests. • SOC and source emissions are mainly responsible for PCN pollution. • Thermal processes may contribute to PCN pollution on a regional scale. • CN-73 could be an indicator of coke consumption in northern China. - Combustion-related activities may contributed to a major part of PCN pollution in Chinese background soil

Climate Change Mitigation Through Reduced-Impact Logging and the Hierarchy of Production Forest Management

Directory of Open Access Journals (Sweden)

Ben Vickers

2012-01-01

Full Text Available The proposed hierarchy of production forest management provides modus operandi for forest concessions to move incrementally towards Sustainable Forest Management (SFM via Reduced-Impact Logging (RIL and forest certification. Financial benefits are sourced in the “Additionality Zone”, financing the rise in the hierarchy and offsetting prohibitive forest and carbon certification costs. RIL carbon registration components consist of developing credible baseline, additionality and leakage arguments around the business-as-usual scenario through the quantification of historical forest inventory and production records, forest infrastructure records and damage to the residual forest. If conventional harvesting is taken as a baseline, research indicates RIL can potentially reduce emissions by approximately 1–7 tCO2e ha−1yr−1. The current market price of USD $7.30 per tCO2e may result in over USD $50 ha−1yr−1 in additional revenue, well above the estimated USD $3–5 ha−1 in carbon transaction costs. Concessions in Sabah Malaysia demonstrate the financial viability of long-term RIL and certification planning. This may act as a basis for future planned forest management activities involving RIL, carbon and forest certification through the hierarchy of production forest management.

Species composition and forest structure explain the temperature sensitivity patterns of productivity in temperate forests

Directory of Open Access Journals (Sweden)

F. J. Bohn

2018-03-01

Full Text Available Rising temperatures due to climate change influence the wood production of forests. Observations show that some temperate forests increase their productivity, whereas others reduce their productivity. This study focuses on how species composition and forest structure properties influence the temperature sensitivity of aboveground wood production (AWP. It further investigates which forests will increase their productivity the most with rising temperatures. We described forest structure by leaf area index, forest height and tree height heterogeneity. Species composition was described by a functional diversity index (Rao's Q and a species distribution index (ΩAWP. ΩAWP quantified how well species are distributed over the different forest layers with regard to AWP. We analysed 370 170 forest stands generated with a forest gap model. These forest stands covered a wide range of possible forest types. For each stand, we estimated annual aboveground wood production and performed a climate sensitivity analysis based on 320 different climate time series (of 1-year length. The scenarios differed in mean annual temperature and annual temperature amplitude. Temperature sensitivity of wood production was quantified as the relative change in productivity resulting from a 1 °C rise in mean annual temperature or annual temperature amplitude. Increasing ΩAWP positively influenced both temperature sensitivity indices of forest, whereas forest height showed a bell-shaped relationship with both indices. Further, we found forests in each successional stage that are positively affected by temperature rise. For such forests, large ΩAWP values were important. In the case of young forests, low functional diversity and small tree height heterogeneity were associated with a positive effect of temperature on wood production. During later successional stages, higher species diversity and larger tree height heterogeneity were an advantage. To achieve such a

Species composition and forest structure explain the temperature sensitivity patterns of productivity in temperate forests

Science.gov (United States)

Bohn, Friedrich J.; May, Felix; Huth, Andreas

2018-03-01

Rising temperatures due to climate change influence the wood production of forests. Observations show that some temperate forests increase their productivity, whereas others reduce their productivity. This study focuses on how species composition and forest structure properties influence the temperature sensitivity of aboveground wood production (AWP). It further investigates which forests will increase their productivity the most with rising temperatures. We described forest structure by leaf area index, forest height and tree height heterogeneity. Species composition was described by a functional diversity index (Rao's Q) and a species distribution index (ΩAWP). ΩAWP quantified how well species are distributed over the different forest layers with regard to AWP. We analysed 370 170 forest stands generated with a forest gap model. These forest stands covered a wide range of possible forest types. For each stand, we estimated annual aboveground wood production and performed a climate sensitivity analysis based on 320 different climate time series (of 1-year length). The scenarios differed in mean annual temperature and annual temperature amplitude. Temperature sensitivity of wood production was quantified as the relative change in productivity resulting from a 1 °C rise in mean annual temperature or annual temperature amplitude. Increasing ΩAWP positively influenced both temperature sensitivity indices of forest, whereas forest height showed a bell-shaped relationship with both indices. Further, we found forests in each successional stage that are positively affected by temperature rise. For such forests, large ΩAWP values were important. In the case of young forests, low functional diversity and small tree height heterogeneity were associated with a positive effect of temperature on wood production. During later successional stages, higher species diversity and larger tree height heterogeneity were an advantage. To achieve such a development, one could plant

Setulang forest conservation strategy in safeguarding the conservation of non-timber forest products in Malinau District

Science.gov (United States)

Hutauruk, T. R.; Lahjie, A. M.; Simarangkir, B. D. A. S.; Aipassa, M. I.; Ruslim, Y.

2018-04-01

Some research on human relationships with forests shows that human activities for the forests are sufficient to meet demand or to meet demand. Both will directly or indirectly change the perceptions of the people who exploit them against the forests being utilized. Setulang community one of the community groups that intensively utilize NTFP as one of the source of fulfillment and fulfill the demand of handicraft product. For needs and demand of livelihood the people of Setulang choose to make the existing forest in the Tane Olen area into. The analysis method used in this research with Stength Weakness Opportunity and Threat (SWOT). The results of this study show the extent to which the commitment of Setulang community and the conservation efforts of Setulang community both self-help and donor assistance and the local government, as well as what strategic steps can be taken by the stakeholders to conserve so that the village forest can provide benefits in the short or long term. Strategic measures need to be set up save Setulang State Forest from degradation and deforestation occurring around the village.

Are forest disturbances amplifying or canceling out climate change-induced productivity changes in European forests?

Science.gov (United States)

Reyer, Christopher P. O.; Bathgate, Stephen; Blennow, Kristina; Borges, Jose G.; Bugmann, Harald; Delzon, Sylvain; Faias, Sonia P.; Garcia-Gonzalo, Jordi; Gardiner, Barry; Gonzalez-Olabarria, Jose Ramon; Gracia, Carlos; Guerra Hernández, Juan; Kellomäki, Seppo; Kramer, Koen; Lexer, Manfred J.; Lindner, Marcus; van der Maaten, Ernst; Maroschek, Michael; Muys, Bart; Nicoll, Bruce; Palahi, Marc; Palma, João HN; Paulo, Joana A.; Peltola, Heli; Pukkala, Timo; Rammer, Werner; Ray, Duncan; Sabaté, Santiago; Schelhaas, Mart-Jan; Seidl, Rupert; Temperli, Christian; Tomé, Margarida; Yousefpour, Rasoul; Zimmermann, Niklaus E.; Hanewinkel, Marc

2017-03-01

Recent studies projecting future climate change impacts on forests mainly consider either the effects of climate change on productivity or on disturbances. However, productivity and disturbances are intrinsically linked because 1) disturbances directly affect forest productivity (e.g. via a reduction in leaf area, growing stock or resource-use efficiency), and 2) disturbance susceptibility is often coupled to a certain development phase of the forest with productivity determining the time a forest is in this specific phase of susceptibility. The objective of this paper is to provide an overview of forest productivity changes in different forest regions in Europe under climate change, and partition these changes into effects induced by climate change alone and by climate change and disturbances. We present projections of climate change impacts on forest productivity from state-of-the-art forest models that dynamically simulate forest productivity and the effects of the main European disturbance agents (fire, storm, insects), driven by the same climate scenario in seven forest case studies along a large climatic gradient throughout Europe. Our study shows that, in most cases, including disturbances in the simulations exaggerate ongoing productivity declines or cancel out productivity gains in response to climate change. In fewer cases, disturbances also increase productivity or buffer climate-change induced productivity losses, e.g. because low severity fires can alleviate resource competition and increase fertilization. Even though our results cannot simply be extrapolated to other types of forests and disturbances, we argue that it is necessary to interpret climate change-induced productivity and disturbance changes jointly to capture the full range of climate change impacts on forests and to plan adaptation measures.

Are forest disturbances amplifying or canceling out climate change-induced productivity changes in European forests?

Science.gov (United States)

Reyer, Christopher P O; Bathgate, Stephen; Blennow, Kristina; Borges, Jose G; Bugmann, Harald; Delzon, Sylvain; Faias, Sonia P; Garcia-Gonzalo, Jordi; Gardiner, Barry; Gonzalez-Olabarria, Jose Ramon; Gracia, Carlos; Hernández, Juan Guerra; Kellomäki, Seppo; Kramer, Koen; Lexer, Manfred J; Lindner, Marcus; van der Maaten, Ernst; Maroschek, Michael; Muys, Bart; Nicoll, Bruce; Palahi, Marc; Palma, João HN; Paulo, Joana A; Peltola, Heli; Pukkala, Timo; Rammer, Werner; Ray, Duncan; Sabaté, Santiago; Schelhaas, Mart-Jan; Seidl, Rupert; Temperli, Christian; Tomé, Margarida; Yousefpour, Rasoul; Zimmermann, Niklaus E; Hanewinkel, Marc

2017-01-01

Recent studies projecting future climate change impacts on forests mainly consider either the effects of climate change on productivity or on disturbances. However, productivity and disturbances are intrinsically linked because 1) disturbances directly affect forest productivity (e.g. via a reduction in leaf area, growing stock or resource-use efficiency), and 2) disturbance susceptibility is often coupled to a certain development phase of the forest with productivity determining the time a forest is in this specific phase of susceptibility. The objective of this paper is to provide an overview of forest productivity changes in different forest regions in Europe under climate change, and partition these changes into effects induced by climate change alone and by climate change and disturbances. We present projections of climate change impacts on forest productivity from state-of-the-art forest models that dynamically simulate forest productivity and the effects of the main European disturbance agents (fire, storm, insects), driven by the same climate scenario in seven forest case studies along a large climatic gradient throughout Europe. Our study shows that, in most cases, including disturbances in the simulations exaggerate ongoing productivity declines or cancel out productivity gains in response to climate change. In fewer cases, disturbances also increase productivity or buffer climate-change induced productivity losses, e.g. because low severity fires can alleviate resource competition and increase fertilization. Even though our results cannot simply be extrapolated to other types of forests and disturbances, we argue that it is necessary to interpret climate change-induced productivity and disturbance changes jointly to capture the full range of climate change impacts on forests and to plan adaptation measures. PMID:28855959

Potentials for forest woody biomass production in Serbia

Directory of Open Access Journals (Sweden)

Vasiljević Aleksandar Lj.

2015-01-01

Full Text Available The paper presents the analysis of possible potentials for the production of forest biomass in Serbia taking into consideration the condition of forests, present organizational and technical capacities as well as the needs and situation on the firewood market. Starting point for the estimation of production potentials for forest biomass is the condition of forests which is analyzed based on the available planning documents on all levels. Potentials for biomass production and use refer to initial periods in the production and use of forest biomass in Serbia.

Foreign capital, forest change and regulatory compliance in Congo Basin forests

International Nuclear Information System (INIS)

Brandt, Jodi S; Nolte, Christoph; Agrawal, Arun; Steinberg, Jessica

2014-01-01

Tropical forest change is driven by demand in distant markets. Equally, investments in tropical forest landscapes by capital originating from distant emerging economies are on the rise. Understanding how forest outcomes vary by investment source is therefore becoming increasingly important. We empirically evaluate the relationship between investment source and deforestation from 2000 to 2010 in the Republic of Congo. A Congolese forestry code was implemented in 2000 to mitigate degradation of production forests by standardizing all logging in the country according to sustainable forest management (SFM) guidelines. Following the implementation of this law, the majority (73%) of Congo’s production forests were managed by European (40%) and Asian (33%) companies. European concessions had the highest rates of total and core deforestation, followed by Asian concessions, indicating that the fragmentation of intact forests in Congo is strongly associated with industrial logging fueled by foreign capital. European concession holders were also far more likely to comply with SFM policies, followed by Asian concessions, suggesting that compliance with Sustainable Forest Management policies may not mitigate degradation in tropical production forests. Further evaluation of the relationship between investment source, regulatory compliance, and outcomes in tropical countries is essential for effective conservation of tropical forest ecosystems. (paper)

Foreign capital, forest change and regulatory compliance in Congo Basin forests

Science.gov (United States)

Brandt, Jodi S.; Nolte, Christoph; Steinberg, Jessica; Agrawal, Arun

2014-04-01

Tropical forest change is driven by demand in distant markets. Equally, investments in tropical forest landscapes by capital originating from distant emerging economies are on the rise. Understanding how forest outcomes vary by investment source is therefore becoming increasingly important. We empirically evaluate the relationship between investment source and deforestation from 2000 to 2010 in the Republic of Congo. A Congolese forestry code was implemented in 2000 to mitigate degradation of production forests by standardizing all logging in the country according to sustainable forest management (SFM) guidelines. Following the implementation of this law, the majority (73%) of Congo’s production forests were managed by European (40%) and Asian (33%) companies. European concessions had the highest rates of total and core deforestation, followed by Asian concessions, indicating that the fragmentation of intact forests in Congo is strongly associated with industrial logging fueled by foreign capital. European concession holders were also far more likely to comply with SFM policies, followed by Asian concessions, suggesting that compliance with Sustainable Forest Management policies may not mitigate degradation in tropical production forests. Further evaluation of the relationship between investment source, regulatory compliance, and outcomes in tropical countries is essential for effective conservation of tropical forest ecosystems.

Short and long-term carbon balance of bioenergy electricity production fueled by forest treatments.

Science.gov (United States)

Kelsey, Katharine C; Barnes, Kallie L; Ryan, Michael G; Neff, Jason C

2014-01-01

Forests store large amounts of carbon in forest biomass, and this carbon can be released to the atmosphere following forest disturbance or management. In the western US, forest fuel reduction treatments designed to reduce the risk of high severity wildfire can change forest carbon balance by removing carbon in the form of biomass, and by altering future potential wildfire behavior in the treated stand. Forest treatment carbon balance is further affected by the fate of this biomass removed from the forest, and the occurrence and intensity of a future wildfire in this stand. In this study we investigate the carbon balance of a forest treatment with varying fates of harvested biomass, including use for bioenergy electricity production, and under varying scenarios of future disturbance and regeneration. Bioenergy is a carbon intensive energy source; in our study we find that carbon emissions from bioenergy electricity production are nearly twice that of coal for the same amount of electricity. However, some emissions from bioenergy electricity production are offset by avoided fossil fuel electricity emissions. The carbon benefit achieved by using harvested biomass for bioenergy electricity production may be increased through avoided pyrogenic emissions if the forest treatment can effectively reduce severity. Forest treatments with the use of harvested biomass for electricity generation can reduce carbon emissions to the atmosphere by offsetting fossil fuel electricity generation emissions, and potentially by avoided pyrogenic emissions due to reduced intensity and severity of a future wildfire in the treated stand. However, changes in future wildfire and regeneration regimes may affect forest carbon balance and these climate-induced changes may influence forest carbon balance as much, or more, than bioenergy production.

Nontimber forest product opportunities in Alaska.

Science.gov (United States)

David Pilz; Susan J. Alexander; Jerry Smith; Robert Schroeder; Jim. Freed

2006-01-01

Nontimber forest products from southern Alaska (also called special forest products) have been used for millennia as resources vital to the livelihoods and culture of Alaska Natives and, more recently, as subsistence resources for the welfare of all citizens. Many of these products are now being sold, and Alaskans seek additional income opportunities through...

N2O production pathways in the subtropical acid forest soils in China

International Nuclear Information System (INIS)

Zhang Jinbo; Cai Zucong; Zhu Tongbin

2011-01-01

To date, N 2 O production pathways are poorly understood in the humid subtropical and tropical forest soils. A 15 N-tracing experiment was carried out under controlled laboratory conditions to investigate the processes responsible for N 2 O production in four subtropical acid forest soils (pH 2 O emission in the subtropical acid forest soils, being responsible for 56.1%, 53.5%, 54.4%, and 55.2% of N 2 O production, in the GC, GS, GB, and TC soils, respectively, under aerobic conditions (40%-52%WFPS). The heterotrophic nitrification (recalcitrant organic N oxidation) accounted for 27.3%-41.8% of N 2 O production, while the contribution of autotrophic nitrification was little in the studied subtropical acid forest soils. The ratios of N 2 O-N emission from total nitrification (heterotrophic+autotrophic nitrification) were higher than those in most previous references. The soil with the lowest pH and highest organic-C content (GB) had the highest ratio (1.63%), suggesting that soil pH-organic matter interactions may exist and affect N 2 O product ratios from nitrification. The ratio of N 2 O-N emission from heterotrophic nitrification varied from 0.02% to 25.4% due to soil pH and organic matter. Results are valuable in the accurate modeling of N2O production in the subtropical acid forest soils and global budget. - Highlights: → We studied N 2 O production pathways in subtropical acid forest soil under aerobic conditions. → Denitrification was the main source of N 2 O production in subtropical acid forest soils. → Heterotrophic nitrification accounted for 27.3%-41.8% of N 2 O production. → While, contribution of autotrophic nitrification to N 2 O production was little. → Ratios of N 2 O-N emission from nitrification were higher than those in most previous references.

Bioenergy production systems and biochar application in forests: potential for renewable energy, soil enhancement, and carbon sequestration

Science.gov (United States)

Kristin McElligott; Debbie Dumroese; Mark Coleman

2011-01-01

Bioenergy production from forest biomass offers a unique solution to reduce wildfire hazard fuel while producing a useful source of renewable energy. However, biomass removals raise concerns about reducing soil carbon and altering forest site productivity. Biochar additions have been suggested as a way to mitigate soil carbon loss and cycle nutrients back into forestry...

Influence of disturbance on temperate forest productivity

Science.gov (United States)

Peters, Emily B.; Wythers, Kirk R.; Bradford, John B.; Reich, Peter B.

2013-01-01

Climate, tree species traits, and soil fertility are key controls on forest productivity. However, in most forest ecosystems, natural and human disturbances, such as wind throw, fire, and harvest, can also exert important and lasting direct and indirect influence over productivity. We used an ecosystem model, PnET-CN, to examine how disturbance type, intensity, and frequency influence net primary production (NPP) across a range of forest types from Minnesota and Wisconsin, USA. We assessed the importance of past disturbances on NPP, net N mineralization, foliar N, and leaf area index at 107 forest stands of differing types (aspen, jack pine, northern hardwood, black spruce) and disturbance history (fire, harvest) by comparing model simulations with observations. The model reasonably predicted differences among forest types in productivity, foliar N, leaf area index, and net N mineralization. Model simulations that included past disturbances minimally improved predictions compared to simulations without disturbance, suggesting the legacy of past disturbances played a minor role in influencing current forest productivity rates. Modeled NPP was more sensitive to the intensity of soil removal during a disturbance than the fraction of stand mortality or wood removal. Increasing crown fire frequency resulted in lower NPP, particularly for conifer forest types with longer leaf life spans and longer recovery times. These findings suggest that, over long time periods, moderate frequency disturbances are a relatively less important control on productivity than climate, soil, and species traits.

25 CFR 163.16 - Forest product sales without advertisement.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Forest product sales without advertisement. 163.16... FORESTRY REGULATIONS Forest Management and Operations § 163.16 Forest product sales without advertisement. (a) Sales of forest products may be made without advertisement to Indians or non-Indians with the...

Effects of gamma radiation on biomass production of ground vegetation under broadleaved forests of northern Wisconsin

International Nuclear Information System (INIS)

Zavitkovski, J.; Salmonson, B.J.

1977-01-01

Effects of gamma irradiation (10,000-Ci 137 Cs source) for one growing season on biomass production of ground vegetation under northern Wisconsin aspen and maple-aspen-birch forests and on an abandoned logging road were evaluated during and 1 year after irradiation. No significant changes in production were determined during the irradiation year. One year later three distinct zones--semidevastated, herbaceous, and original forest--developed along the radiation gradient. Biomass production under forest canopies decreased significantly in the semidevastated zone, increased significantly in the herbaceous zone (primarily responding to additional light), and remained unchanged under the original forest. Logging-road vegetation responded similarly, but the changes were restricted within higher radiation doses. At comparable levels of radiation, production of species of the logging-road vegetation was affected less than that of species under forest canopies. Such a trend was predictable from the generally smaller interphase chromosome volumes of the species on the logging road and from their ability to survive in severe habitats

Does nitrogen and sulfur deposition affect forest productivity?

Science.gov (United States)

Brittany A. Johnson; Kathryn B. Piatek; Mary Beth Adams; John R. Brooks

2010-01-01

We studied the effects of atmospheric nitrogen and sulfur deposition on forest productivity in a 10-year-old, aggrading forest stand at the Fernow Experimental Forest in Tucker County, WV. Forest productivity was expressed as total aboveground wood biomass, which included stem and branch weight of standing live trees. Ten years after stand regeneration and treatment...

Non-timber forest product extraction as a productive bricolage process

NARCIS (Netherlands)

Ros-Tonen, M.; Arts, B.; van Bommel, S.; Ros-Tonen, M.; Verschoor, G.

2012-01-01

This chapter explores the usefulness of the ‘productive bricolage’ concept, coined by Croll and Parkin (1992) and further elaborated by Batterbury (2001), in understanding the role of non-timber forest products (NTFPs) in people’s livelihoods and the forested landscape. I argue that NTFP extraction

Recommendations for sustainable development of non-timber forest products

Science.gov (United States)

Gina H. Mohammed

2001-01-01

Non-timber forest products--or NTFPs--are considered here to be botanical products harvested or originating from forest-based species, but excluding primary timber products, industrial boards and composites, and paper products. A recent study of non-timber forest products in Ontario, Canada, identified at least 50 types of NTFPs and hundreds of specific products used...

Resource analysis of the Chinese society 1980-2002 based on exergy-Part 2: Renewable energy sources and forest

International Nuclear Information System (INIS)

Chen, B.; Chen, G.Q.

2007-01-01

This second part is the continuation of the first part on fossil fuels and energy minerals. The major renewable energy sources and forest products entering the Chinese society from 1980 to 2002, including sunlight, wind power, tidal power, wave power, geothermal power and heating, biomass, hydroelectric resource and forestry products, are calculated and analyzed in detail in this paper. The solar exergy inputs from solar photovoltaics and solar collectors, including water heater, solar oven and solar building, are calculated and discussed. The development of the wind power plant is presented. Major tidal power plants, which are still working, are addressed. Wave power devices and plants are introduced. Geothermal resources, mainly for power generation and heating, associated with distribution, are depicted. The utilization of biomass, embracing firewood, straw and biogas, which served as the main obtainable local resources for private consumption and production in the rural areas, is illustrated. Development of hydroelectric resources as complement to scarce fossil fuels is represented, of which the small hydropower project adapted for rural areas is emphasized. Finally, forest products from timber forest and economic forest are presented, with the forestation, reproducing, tending areas and sum of odd forestation trees being manifested

Non-Timber Forest Products Marketing Systems and Market Players in Southwest Virginia: A Case Study of Craft, Medicinal and Herbal, Specialty Wood, and Edible Forest Products

OpenAIRE

Greene, Sarah Marsden

1998-01-01

Non-timber forest products (NTFPs) are important in rural southwest Virginia as a source of household sustenance and supplemental income. The trade in NTFPs from this region is centuries old and now helps supply growing worldwide demands. Although marketing is a vital part of optimizing the value of these products, it has been ignored in rural natural resource development. This research analyzes marketing systems for selected NTFPs in southwest Virginia by describing marketing chains, inter...

The Effect of China’s New Circular Collective Forest Tenure Reform on Household Non-Timber Forest Product Production in Natural Forest Protection Project Regions

Directory of Open Access Journals (Sweden)

Yang Ren

2018-04-01

Full Text Available The implementation of China’s natural forest protection project (Protection Project in 1998 changed households’ forestry production modes in project regions, and China’s new circular collective forest tenure reform (Tenure Reform has been implemented since 2003 with the goal of motivating household forestry production and increasing household income from forests. Policymakers expect that Tenure Reform could also stimulate households to engage in non-timber forest products (NTFPs production in Protection Project regions. However, only a few studies have investigated the effect of Tenure Reform on household NTFP production in Protection Project regions. To fill this gap, we built an integrative conceptual framework and estimated a corresponding structural equation model (SEM using survey data from 932 households in Protection Project regions in southwestern China. In our research framework, there are four factors, including household characteristics, labour and social capital, forestland characteristics, and the Tenure Reform, affecting household NTFP production. The results substantiate that Tenure Reform has had a significant positive effect on household NTFP production. Additionally, household and forestland characteristics have promoted household NTFP production, but quantitatively less than Tenure Reform. This report can be used to inform the government that future investment in Tenure Reform still needs to be enhanced, and policy enforcement still needs to be strengthened.

25 CFR 163.14 - Sale of forest products.

Science.gov (United States)

2010-04-01

... recognized tribal government, open market sales of Indian forest products may be authorized. Such sales... the owners of a majority Indian interest on individually owned lands. Open market sales of forest... Management and Operations § 163.14 Sale of forest products. (a) Consistent with the economic objectives of...

Eastern national forests: managing for nontimber products

Science.gov (United States)

James L. Chamberlain; Robert J. Bush; A.L. Hammett; Philip A. Araman

2002-01-01

Many products are harvested from the forests of the eastern United States that are not timber-based but originate from plant materials. Over the past decade, concern has grown about the sustainability of the forest resources from which these products originate, and an associated interest in managing for these products has materialized. A content analysis of the...

Non-timber forest products in Hawaii

Science.gov (United States)

Katie Kamelamela; James B. Friday; Tamara Ticktin; Ashley. Lehman

2015-01-01

Hawaiian forests provide a wide array of non-timber forest products for both traditional and modern uses. Flowers, vines, and ferns are collected for creating garlands or lei for hula dances and parades. Lei made from materials gathered in the forest are made for personal use and sold, especially during graduation times. Bamboo is harvested for structures and for...

Forest production dynamics along a wood density spectrum in eastern US forests

Science.gov (United States)

C.W. Woodall; M.B. Russell; B.F. Walters; A.W. D' Amato; K. Zhu; S.S. Saatchi

2015-01-01

Emerging plant economics spectrum theories were confirmed across temperate forest systems of the eastern US where the use of a forest stand's mean wood density elucidated forest volume and biomass production dynamics integrating aspects of climate, tree mortality/growth, and rates of site occupancy.

Non-timber forest products marketing systems and market players in southwest Virginia: crafts, medicinal and herbal, and specialty wood products

Science.gov (United States)

S.M. Greene; A.L. Hammett; S. Kant

2000-01-01

Non-timber forest products (NTFPs) are important in rural southwest Virginia as a source of household income. Marketing system of crafts, medicinal and herbal, and specialty wood products are studied using exploratory and qualitative research methods. Fifty market players at various levels in marketing chains are interviewed to get the information on elements of...

Developing technology for large-scale production of forest chips. Wood Energy Technology Programme 1999-2003. Interim report

International Nuclear Information System (INIS)

Hakkila, P.

2003-01-01

Finland is enhancing its use of renewable sources in energy production. From the 1995 level, the use of renewable energy is to be increased by 50 % by 2010, and 100 % by 2025. Wood-based fuels will play a leading role in this development. The main source of wood-based fuels is processing residues from the forest industries. However, as all processing residues are already in use, an increase is possible only as far as the capacity and wood consumption of the forest industries grow. Energy policy affects the production and availability of processing residues only indirectly. Another large source of wood-based energy is forest fuels, consisting of traditional firewood and chips comminuted from low-quality biomass. It is estimated that the reserve of technically harvest-able forest biomass is 10-16 Mm' annually, when no specific cost limit is applied. This corresponds to 2-3 Mtoe or 6-9 % of the present consumption of primary energy in Finland. How much of this re-serve it will actually be possible to harvest and utilize depends on the cost competitiveness of forest chips against alternative sources of energy. A goal of Finnish energy and climate strategies is to use 5 Mm' forest chips annually by 2010. The use of wood fuels is being promoted by means of taxation, investment aid and support for chip production from young forests. Furthermore, research and development is being supported in order to create techno-economic conditions for the competitive production of forest chips. In 1999, the National Technology Agency Tekes established the five-year Wood Energy Technology Programme to stimulate the development of efficient systems for the large-scale production of forest chips. Key tar-gets are competitive costs, reliable supply and good quality chips. The two guiding principles of the programme are: (1) close cooperation between researchers and practitioners and (2) to apply research and development to the practical applications and commercialization. As of November

Greenhouse gas and carbon profile of the U.S. forest products industry value chain

Science.gov (United States)

Linda S. Heath; Van Maltby; Reid Miner; Kenneth E. Skog; James E. Smith; Jay Unwin; Brad Upton

2010-01-01

A greenhouse gas and carbon accounting profile was developed for the U.S. forest products industry value chain for 1990 and 2004-2005 by examining net atmospheric fluxes of CO2 and other greenhouse gases (GHGs) using a variety of methods and data sources. Major GHG emission sources include direct and indirect (from purchased electricity...

Forest Management for Non-Wood Forest Products and Services in ...

African Journals Online (AJOL)

The contribution of Non-Wood Forest Products (NWFPs) and services in livelihood support has been reviewed. Quite a number of NWFPs are also important articles of commerce and contribute significantly to the economies various African countries. The non-consumptive role of forests has been examined in terms of ...

U.S. forest products module : a technical document supporting the Forest Service 2010 RPA Assessment

Science.gov (United States)

Peter J. Ince; Andrew D. Kramp; Kenneth E. Skog; Henry N. Spelter; David N. Wear

2011-01-01

The U.S. Forest Products Module (USFPM) is a partial market equilibrium model of the U.S. forest sector that operates within the Global Forest Products Model (GFPM) to provide long-range timber market projections in relation to global economic scenarios. USFPM was designed specifically for the 2010 RPA forest assessment, but it is being used also in other applications...

OPTIMIZATION METHODS IN TRANSPORTATION OF FOREST PRODUCTS

Directory of Open Access Journals (Sweden)

Selçuk Gümüş

2008-04-01

Full Text Available Turkey has total of 21.2 million ha (27 % forest land. In this area, average 9 million m3 of logs and 5 million stere of fuel wood have been annually produced by the government forest enterprises. The total annual production is approximately 13million m3 Considering the fact that the costs of transporting forest products was about . 160 million TL in the year of 2006, the importance of optimizing the total costs in transportation can be better understood. Today, there is not common optimization method used at whole transportation problems. However, the decision makers select the most appropriate methods according to their aims.Comprehending of features and capacity of optimization methods is important for selecting of the most appropriate method. The evaluation of optimization methods that can be used at forest products transportation is aimed in this study.

Harvested wood products and REDD+: looking beyond the forest border

Directory of Open Access Journals (Sweden)

Tunggul Butarbutar

2016-05-01

Full Text Available Abstract Background The focus of REDD+ is sensu stricto on maintaining forest carbon stocks. We extend the scope of sustainable management of forest from forests to timber utilization, and study carbon offsets resulting from the utilization of harvested timber for bio energy or harvested wood products (HWPs. The emission budget of harvesting operations depends on the loss of standing biomass by timber extracted from the forest site and logging losses on the one side, and on the other on the wood end use and the utilization of processing residues. We develop two scenarios to quantify the magnitude of CO2 emissions by (1 energetic utilization, and (2 energetic and material utilization of harvested timber and compare the substitution effects for different fossil energy sources. Results The direct energetic use of harvested timber does not compensate for the losses of forest carbon stock. Logging residuals and displacement factors reflecting different wood use constitute by far the most important factor in potential emission reductions. Substitution effects resulting from energetic use of mill residuals and from HWPs have only a subordinated contribution to the total emissions as well as the type of fossil fuel utilized to quantify substitution effects. Material substitution effects associated with harvested wood products show a high potential to increase the climate change benefits. Conclusions The observation and perception of REDD+ should not be restricted to sustainable management and reduced impact logging practices in the forest domain but should be extended to the utilization of extracted timber. Substitution effects from material and energetic utilization of harvested timber result in considerable emission reductions, which can compensate for the loss of forest carbon, and eventually contribute to the overall climate change mitigation benefits from forestry sector.

Forecasting forest chip energy production in Finland 2008-2014

International Nuclear Information System (INIS)

Linden, Mikael

2011-01-01

Energy policy measures aim to increase energy production from forest chips in Finland to 10 TWh by year 2010. However, on the regional level production differences are large, and the regional estimates of the potential base of raw materials for the production of forest chips are heterogeneous. In order to analyse the validity of the above target, two methods are proposed to derive forecasts for region-level energy production from forest chips in Finland in the years 2008-2014. The plant-level data from 2003-2007 gives a starting point for a detailed statistical analysis of present and future region-level forest chip production. Observed 2008 regional levels are above the estimated prediction 95% confidence intervals based on aggregation of plant-level time averages. A simple time trend model with fixed-region effects provides accurate forecasts for the years 2008-2014. Forest chip production forecast confidence intervals cover almost all regions for the 2008 levels and the estimates of potential production levels for 2014. The forecast confidence intervals are also derived with re-sampling methods, i.e. with bootstrap methods, to obtain more reliable results. Results confirm that a general materials shortfall is not expected in the near future for forest chip energy production in Finland.

Pine straw production: from forest to front yard

Science.gov (United States)

Janice F. Dyer; Rebecca J. Barlow; John S. Kush; John C. Gilbert

2012-01-01

Southern forestry may be undergoing a paradigm shift in which timber production is not necessarily the major reason for owning forested land. However, there remains interest in generating income from the land and landowners are exploring alternatives, including agroforestry practices and production of non-timber forest products (NTFPs). One such alternative more recent...

36 CFR 223.219 - Sustainable harvest of special forest products.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Sustainable harvest of....219 Sustainable harvest of special forest products. (a) Sustainable harvest levels. Prior to offering... product's sustainable harvest level. A special forest product's sustainable harvest level is the total...

Productivity and Cost Analysis of Forest Harvesting Operation in Matang Mangrove Forest, Perak, Malaysia

Directory of Open Access Journals (Sweden)

Albert Empawi Tindit

2017-04-01

Full Text Available Matang Mangrove Forest is under systematic management since 1902 and still considered as the best managed mangrove forest in the world. This research was conducted to measure the time and productivity of forest harvesting operation and also to analyze the cost and revenue of mangrove forest harvesting operation at Matang mangrove forest. This project had been carried out in cooperation with Seri Sepetang Enterprise, one of the harvesting licenses in Kuala Sepetang, Perak. Data collections were taken in every station starting from standing tree until to the Kiln-Drying jetty. The data then calculated by using the formulas of productivity and cost analysis. As the result, the productivity for felling, bucking and debarking, the manual skidding using wheel-barrow and the water transportation are 1.84 tan/hour, 3.82 tan/hour and 4.64 tan/hour respectively. The cost for each operation of 9 tan log volume for felling, bucking and debarking, the manual skidding using wheel-barrow and the water transportation are RM 56.88, RM 10.80 and RM 36.72 respectively. As the revenue, the company paid RM 260 per 9 tan of log for the in-forest operation (felling, manual skidding and loading to the ship and pay RM 80 per 9 tan for the water transportation, and they gained the net profit of RM 192.32 and RM 43.28 respectively. The average of forest harvesting operation is twice operation in a day (equal with 2 x 9-ton volume of log production a day, so they will gain a double profit. In conclusion, the forest harvesting operation is sustainably managed for supplying the raw material of charcoal industries in Matang mangrove forest. Since, they work manually and spend much energy in this forest harvesting operation, so for further study it recommends to conduct the ergonomics evaluation during forest harvesting operation at Matang Mangrove Forest.

Measuring forest and wild product contributions to household welfare

DEFF Research Database (Denmark)

Bakkegaard, Riyong Kim; Hogarth, Nicholas J.; Bong, Indah Waty

2017-01-01

in the lowest bracket. Consumption of forest products and importance as a coping strategy was higher in the most upstream village, where sale of forest products in times of shock was more marked in the most downstream village (where forest coping strategies were also least important). The Forestry Modules...

Assessing the bibliometric productivity of forest scientists in Italy

Directory of Open Access Journals (Sweden)

Francesca Giannetti

2016-07-01

Full Text Available Since 2010, the Italian Ministry of University and Research issued new evaluation protocols to select candidates for University professorships and assess the bibliometric productivity of Universities and Research Institutes based on bibliometric indicators, i.e. scientific paper and citation numbers and the h-index. Under this framework, the objective of this study was to quantify the bibliometric productivity of the Italian forest research community during the 2002-2012 period. We examined the following productivity parameters: (i the bibliometric productivity under the Forestry subject category at the global level; (ii compared the aggregated bibliometric productivity of Italian forest scientists with scientists from other countries; (iii analyzed publication and citation temporal trends of Italian forest scientists and their international collaborations; and (iv characterized productivity distribution among Italian forest scientists at different career levels. Results indicated the following: (i the UK is the most efficient country based on the ratio between Gross Domestic Spending (GDS on Research and Development (R&D and bibliometric productivity under the Forestry subject category, followed by Italy; (ii Italian forest scientist productivity exhibited a significant positive time trend, but was characterized by high inequality across authors; (iii one-half of the Italian forest scientist publications were written in collaboration with foreign scientists; (iv a strong relationship exists between bibliometric indicators calculated by WOS and SCOPUS, suggesting these two databases have the same potential to evaluate the forestry research community; and (v self-citations did not significantly affect the rank of Italian forest scientists.

Productivity assessment of timber harvesting techniques for supporting sustainable forest management of secondary Atlantic Forests in southern Brazil

Directory of Open Access Journals (Sweden)

Pedro Caldas Britto

2017-12-01

Full Text Available The Atlantic Forest in southern Brazil has been subject to overexploitation in the past prompting the formulation of a rigorous conservation orientated policy by the government including a strict ban of timber harvesting. In the region, the forestland is owned by farmers. The economic value of the forest is rather limited for those farmers, because of the prohibition of commercial timber harvesting as a source of income. Sustainable forest management systems can offer great potential as new income opportunities for land holders, and further actively support the process of ecosystem rehabilitation and protection for these ecosystems. Yet, successful implementation of such sustainable management systems requires feasible and adapted timber harvesting systems. In order to develop such harvesting systems, a regional comparative case study was conducted at a typical smallholder forestry venture with the objective to analyze and evaluate harvesting methods supporting sustainable management of the Atlantic Forest. This study assessed production rates and associated costs of a common conventional timber harvesting method (CM and a proposed alternative method (AM. CM was performed by a selected, typical forest landowner who had only basic training in chainsaw operations, but 20 years of experience at the wood yard of his small sawmill. In contrast, the AM employed a professional chainsaw operator from the Amazon forest, trained and experienced in reduced impact logging techniques using state of the art equipment, supplemented by a snatch block and a skidding cone for improved extraction. Time study based models identified tree volume, winching distance and skidding distance to the landing as the most significant independent variables affecting productivity. Total net productivity ranged from 4.9 m³ PMH0-1 for CM to 3.1 m³ PMH0-1 for AM. Corresponding gross-productivity ranged from 3.0 m³ SMH-1 to 1.9 m³ SMH-1 with an overall mean utilization rate of

Tissue culture and micropropagation for forest biomass production

Energy Technology Data Exchange (ETDEWEB)

Mason, E.; Maine, F.W.

1984-09-01

An increase in forest production will be necessary in the future when wood becomes a major renewable source of energy and chemicals along with its traditional role of fibre source. This increase could eventually by achieved be proper selection and breeding of trees. Clonal forestry by vegetative propagation of cuttings is becoming a viable alternative to a seedling-based forestry with many advantages, and cutting could be used to quickly propagate large numbers of clones of control-pollinated seedlings. Most forest trees are propagated sexually and seed orchards were started in the US and Canada in the last 40-50 years for breeding purposes. Forests could ultimately be established with improved seedlings instead of from seed with unknown genetic potential, or by natural regeneration. Micropropagation is the term used to refer to the propagation of plants raised by tissue culture methods rather than from seeds or cuttings. Many clonal plantlets could be regenerated asexually in the laboratory and eventually transplanted to permanent sites. In addition the technology could be developed to produce new variants from somatic cells. Tissue culture is a technique which may be useful for plant propagation where conventional methods are inadequate or unsuitable. However, traditional studies of field planting observed over long periods of time would still be necessary. This document has the object of informing those who may wish to know more about these techniques in relation to practical application, and require a general overview rather than experimental details, which are given in an annotated bilbiography. 274 refs., 2 figs., 1 tab.

Improving Post-Hurricane Katrina Forest Management with MODIS Time Series Products

Science.gov (United States)

Lewis, Mark David; Spruce, Joseph; Evans, David; Anderson, Daniel

2012-01-01

Hurricane damage to forests can be severe, causing millions of dollars of timber damage and loss. To help mitigate loss, state agencies require information on location, intensity, and extent of damaged forests. NASA's MODerate Resolution Imaging Spectroradiometer (MODIS) Normalized Difference Vegetation Index (NDVI) time series data products offers a potential means for state agencies to monitor hurricane-induced forest damage and recovery across a broad region. In response, a project was conducted to produce and assess 250 meter forest disturbance and recovery maps for areas in southern Mississippi impacted by Hurricane Katrina. The products and capabilities from the project were compiled to aid work of the Mississippi Institute for Forest Inventory (MIFI). A series of NDVI change detection products were computed to assess hurricane induced damage and recovery. Hurricane-induced forest damage maps were derived by computing percent change between MODIS MOD13 16-day composited NDVI pre-hurricane "baseline" products (2003 and 2004) and post-hurricane NDVI products (2005). Recovery products were then computed in which post storm 2006, 2007, 2008 and 2009 NDVI data was each singularly compared to the historical baseline NDVI. All percent NDVI change considered the 16-day composite period of August 29 to September 13 for each year in the study. This provided percent change in the maximum NDVI for the 2 week period just after the hurricane event and for each subsequent anniversary through 2009, resulting in forest disturbance products for 2005 and recovery products for the following 4 years. These disturbance and recovery products were produced for the Mississippi Institute for Forest Inventory's (MIFI) Southeast Inventory District and also for the entire hurricane impact zone. MIFI forest inventory products were used as ground truth information for the project. Each NDVI percent change product was classified into 6 categories of forest disturbance intensity. Stand age

Forest thinnings for integrated lumber and paper production

Science.gov (United States)

J.Y. Zhu; C.T. Scott; R. Gleisner; D. Mann; D.W. Vahey; D.P. Dykstra; G.H. Quinn; L.L. Edwards

2007-01-01

Integrated lumber and paper productions using forest thinning materials from U.S. national forests can significantly reduce the cost of prescriptive thinning operations. Many of the trees removed during forest thinnings are in small-diameter classes (diameter at breast height

Monitoring nontimber forest products using forest inventory data: an example with slippery elm bark

Science.gov (United States)

Jobriath S. Kauffman; Stephen P. Prisley; James L. Chamberlain

2015-01-01

The USDA Forest Service Forest Inventory and Analysi (FIA) program collects data on a wealth of variables related to trees in forests. Some of these trees produce nontimber forest products (NTFPs) (e.g., fruit, bark and sap) that are harvested for culinary, decorative, building, and medicinal purposes. At least 11 tree species inventoried by FIA are valued for their...

Simulation of the Effect of Intensive Forest Management on Forest Production in Sweden

Directory of Open Access Journals (Sweden)

Ola Rosvall

2011-03-01

Full Text Available The effects of intensifying the management of 15% of the Swedish forest land on potential future forest production over a 100-year period were investigated in a simulation study. The intensive management treatments, which were introduced over a period of 50 years, were: intensive fertilization of Norway spruce (IntFert; bulking-up Norway spruce elite populations using somatic embryogenesis (SE-seedlings; planting of lodgepole pine, hybrid larch, and Sitka spruce (Contorta, Larch, and Sitka; fertilization with wood ash on peatlands (Wood ash; and conventional fertilization in mature forests (ConFert. Potential sites for applying intensive forest management (IFM to sites with low nature conservation values were determined with a nature conservation score (NCS. Four different scenarios were simulated: “Base scenario”, which aimed at reducing the negative impact on nature conservation values, “Fast implementation”, “No IntFert” (IntFert was not used, and “Large Forest Companies”, where the majority of plots were selected on company land. Total yields during the 100-year simulation period were about 85–92% higher for the intensive forest management scenarios than for the reference scenario (business as usual. In the “No IntFert” scenario total production was 1.8% lower and in the “Large Forest Companies” scenario total production was 4.8% lower than in the “Base scenario”. “Fast implementation” of IFM increased yield by 15% compared to the “Base scenario”. Norway spruce SE-seedlings and IntFert gave the highest yields, measured as total production during the 100-year simulation period, but relative to the yields in the reference scenario, the highest increases in yield were for Contorta. The “Base scenario” and “No IntFert” gave the highest yields for plots with the lowest NCS, but plots with higher NCS had to be used in the “Fast implementation” and “Large Forest Companies” scenarios. More than

Relationships between net primary productivity and forest stand age in U.S. forests

Science.gov (United States)

Liming He; Jing M. Chen; Yude Pan; Richard Birdsey; Jens. Kattge

2012-01-01

Net primary productivity (NPP) is a key flux in the terrestrial ecosystem carbon balance, as it summarizes the autotrophic input into the system. Forest NPP varies predictably with stand age, and quantitative information on the NPP-age relationship for different regions and forest types is therefore fundamentally important for forest carbon cycle modeling. We used four...

Forest bioenergy or forest carbon? Assessing trade-offs in greenhouse gas mitigation with wood-based fuels.

Science.gov (United States)

McKechnie, Jon; Colombo, Steve; Chen, Jiaxin; Mabee, Warren; MacLean, Heather L

2011-01-15

The potential of forest-based bioenergy to reduce greenhouse gas (GHG) emissions when displacing fossil-based energy must be balanced with forest carbon implications related to biomass harvest. We integrate life cycle assessment (LCA) and forest carbon analysis to assess total GHG emissions of forest bioenergy over time. Application of the method to case studies of wood pellet and ethanol production from forest biomass reveals a substantial reduction in forest carbon due to bioenergy production. For all cases, harvest-related forest carbon reductions and associated GHG emissions initially exceed avoided fossil fuel-related emissions, temporarily increasing overall emissions. In the long term, electricity generation from pellets reduces overall emissions relative to coal, although forest carbon losses delay net GHG mitigation by 16-38 years, depending on biomass source (harvest residues/standing trees). Ethanol produced from standing trees increases overall emissions throughout 100 years of continuous production: ethanol from residues achieves reductions after a 74 year delay. Forest carbon more significantly affects bioenergy emissions when biomass is sourced from standing trees compared to residues and when less GHG-intensive fuels are displaced. In all cases, forest carbon dynamics are significant. Although study results are not generalizable to all forests, we suggest the integrated LCA/forest carbon approach be undertaken for bioenergy studies.

Towards an ecologically sustainable energy production based on forest biomass - Forest fertilisation with nutrient rich organic waste matter

Energy Technology Data Exchange (ETDEWEB)

Roegaard, Pia-Maria; Aakerback, Nina; Sahlen, Kenneth; Sundell, Markus [Swedish Polytechnic, Vasa (Finland)

2006-07-15

The project is a collaboration between Swedish Univ. of Agricultural Sciences, Faculty of Forest Sciences in Umeaa, Swedish Polytechnic, Finland in Vaasa and the Finnish Forest Research Institute in Kannus. Today there are pronounced goals within the EU that lead towards an ecologically sustainable community and there is also a global goal to decrease net carbon dioxide emissions. These goals involve among other things efforts to increase the use of renewable biofuel as energy source. This will result in an enlarged demand for biomass for energy production. Therefore, the forest resources in the Nordic countries will be required for energy production to a far greater extent in the future. One way to meet this increased tree biomass demand is to increase forest tree growth through supply of nutrients, of which nitrogen is the most important. Organic nutrient rich waste matter from the society, such as sewage sludge and mink and fox manure compost from fur farms might be used as forest fertilizer. This would result in increased supply of renewable tree biomass, decreased net carbon dioxide emissions, increased forest ecosystem carbon sequestration, decreased methane emissions from sewage sludge landfill and decreased society costs for sludge landfill or incineration. Therefore, the purpose of this project is to develop methods for forest fertilisation with nutrient rich organic waste matter from municipal wastewater, sludge and manure from mink and fox farms. The project may be divided into three main parts. The first part is the chemical composition of the fertiliser with the objective to increase the nitrogen content in sludge-based fertilisers and in compost of mink and fox manure. The second part involves the technique and logistics for forest fertilisation i.e., to develop application equipment that may be integrated in existing forest technical systems. The third part consists of field fertilisation investigations and an environmental impact assessment

From failure to value: economic valuation for a selected set of products and services from Mediterranean forests

Directory of Open Access Journals (Sweden)

Davide Pettenella

2016-04-01

Full Text Available Aim of study: the paper estimates the economic value of a selected range of forest products and services, i.e. roundwood, non-wood forest products (NWFPs, and carbon-related services.Area of study: the research covers 21 Mediterranean countries, distinguished into four sub-regions.Material and methods: data have been gathered from official statistical sources (e.g. FAOSTAT, scientific literature and technical reports. Different estimation approaches based on market-price have been used for different products/services.Main results: the estimated value ranges between €10,512 and €11,158 million (M. Wood products represent more than 85% of the total value. Within them, industrial timber is the most relevant component (65%. Figures for NWFPs are likely to be underestimated because data are available only for some products and countries. When using alternative estimates for pine nuts, pine resin and cork, figures show a €36.8-572 M increase. In geographical terms, the economic value of Mediterranean forests is highly concentrated: North-West Mediterranean countries account for 70%, and nearly 90% is in just four countries (France, Spain, Turkey and Italy.Research highlights: enhancing the offer of Mediterranean forest products and increasing their role in the rural economy could help to reduce the costs of forest protection: a well-structured forest economy ensuring stable flows of incomes can provide a fundamental set of public non-market services and social values to both local people and the whole community. Understanding the true value of natural resources, then, is an essential step for promoting their protection and sustainable use.Abbreviations: Bln: billion; CUM: cubic meter; EM: East Mediterranean; FAO: Food and Agriculture Organisation of the United Nations; FRA: Forest Resource Assessment; ha: hectare; M: million; NEM: North-East Mediterranean; NWFP: non-wood forest product; NWM: North-West Mediterranean; SM: South Mediterranean. 

Marketing of non-wood forest products: Case study of the enterprise for forest mushroom processing

Directory of Open Access Journals (Sweden)

Keča Ljiljana

2009-01-01

Full Text Available Under the impact of climate changes it is increasingly obvious that forestry should rely more strongly on the multi­functional character of the managed resources. In addition to wood, there is a series of non­wood products and services offered by forests. Non­wood forest products and services consist of various fruits of forest trees and shrubs, mushrooms, various objects made of non­wood material, and especially forest social services, such as recreation, tourism, hunting, photo­safari, etc. This paper presents a marketing analysis on the example of the enterprise dealing with the purchase, processing and sale of wild mushrooms and products made of mushrooms. The study applies a modern methodological approach implemented in similar researches.

The Economic Importance of Forest Products in Enugu State, Nigeria

African Journals Online (AJOL)

The Economic Importance of Forest Products in Enugu State, Nigeria. ... International Journal of Tropical Agriculture and Food Systems ... The regression results, showed that access to modern forest products harvesting/processing technology (Te) and relative contribution of forest output in total household economy (Ro) ...

77 FR 65095 - National Forest Products Week, 2012

Science.gov (United States)

2012-10-24

... October 27, 2012, as National Forest Products Week. I call on the people of the United States to join me... National Forest Products Week, 2012 By the President of the United States of America A Proclamation Since... tourism and recreation that create jobs and growth in our rural communities. They provide the raw...

Socio-ecological costs of Amazon nut and timber production at community household forests in the Bolivian Amazon.

Science.gov (United States)

Soriano, Marlene; Mohren, Frits; Ascarrunz, Nataly; Dressler, Wolfram; Peña-Claros, Marielos

2017-01-01

The Bolivian Amazon holds a complex configuration of people and forested landscapes in which communities hold secure tenure rights over a rich ecosystem offering a range of livelihood income opportunities. A large share of this income is derived from Amazon nut (Bertholletia excelsa). Many communities also have long-standing experience with community timber management plans. However, livelihood needs and desires for better living conditions may continue to place these resources under considerable stress as income needs and opportunities intensify and diversify. We aim to identify the socioeconomic and biophysical factors determining the income from forests, husbandry, off-farm and two keystone forest products (i.e., Amazon nut and timber) in the Bolivian Amazon region. We used structural equation modelling tools to account for the complex inter-relationships between socioeconomic and biophysical factors in predicting each source of income. The potential exists to increase incomes from existing livelihood activities in ways that reduce dependency upon forest resources. For example, changes in off-farm income sources can act to increase or decrease forest incomes. Market accessibility, social, financial, and natural and physical assets determined the amount of income community households could derive from Amazon nut and timber. Factors related to community households' local ecological knowledge, such as the number of non-timber forest products harvested and the number of management practices applied to enhance Amazon nut production, defined the amount of income these households could derive from Amazon nut and timber, respectively. The (inter) relationships found among socioeconomic and biophysical factors over income shed light on ways to improve forest-dependent livelihoods in the Bolivian Amazon. We believe that our analysis could be applicable to other contexts throughout the tropics as well.

Impacts of Tariff and Non-tariff Trade Barriers on Global Forest Products Trade: An Application of the Global Forest Products Model

NARCIS (Netherlands)

Sun, L.; Bogdanski, B.; Stennes, B.; Kooten, van G.C.

2010-01-01

Although there has been considerable analysis on the effects of trade measures on forest product markets, these have tended to focus on tariffs. There is growing concern about the impact of non-tariff trade measures on the global forest product sector. The objective of this study is to fill a gap

Strategic analysis of International Forest Products Limited

OpenAIRE

Modesto, Robin M.

2005-01-01

International Forest Products Limited is a sawmilling company that produces softwood lumber for sale in domestic and international markets including the United States and Japan. Production facilities located in British Columbia, Washington and Oregon produce nearly 1.5 billion board feet of lumber annually. Timber is secured through Crown forest tenure holdings and external open market purchases. This paper includes: a strategic analysis of the firm; an industry analysis; a strategic fit anal...

Forest and wood products role in carbon sequestration

Energy Technology Data Exchange (ETDEWEB)

Sampson, R.N.

1997-12-31

An evaluation of the use of U.S. forests and forest products for carbon emission mitigation is presented. The current role of forests in carbon sequestration is described in terms of regional differences and forest management techniques. The potential for increasing carbon storage by converting marginal crop and pasture land, increasing timberland growth, reducing wildfire losses, and changing timber harvest methods is examined. Post-harvest carbon flows, environmental impacts of wood products, biomass energy crops, and increased use of energy-conserving trees are reviewed for their potential in reducing or offsetting carbon emissions. It is estimated that these techniques could offset 20 to 40 percent of the carbon emitted annually in the U.S. 39 refs., 5 tabs.

Forest Products Industry Technology Roadmap

Energy Technology Data Exchange (ETDEWEB)

none,

2010-04-01

This document describes the forest products industry's research and development priorities. The original technology roadmap published by the industry in 1999 and was most recently updated in April 2010.

Carbon stores, sinks, and sources in forests of northwestern Russia: can we reconcile forest inventories with remote sensing results?

Science.gov (United States)

Olga N. Krankina; Mark E. Harmon; Warren B. Cohen; Doug R. Oetter; Olga Zyrina; Maureen V. Duane

2004-01-01

Forest inventories and remote sensing are the two principal data sources used to estimate carbon (C) stocks and fluxes for large forest regions. National governments have historically relied on forest inventories for assessments but developments in remote sensing technology provide additional opportunities for operational C monitoring. The estimate of total C stock in...

Forest amount affects soybean productivity in Brazilian agricultural frontier

Science.gov (United States)

Rattis, L.; Brando, P. M.; Marques, E. Q.; Queiroz, N.; Silverio, D. V.; Macedo, M.; Coe, M. T.

2017-12-01

Over the past three decades, large tracts of tropical forests have been converted to crop and pasturelands across southern Amazonia, largely to meet the increasing worldwide demand for protein. As the world's population continue to grow and consume more protein per capita, forest conversion to grow more crops could be a potential solution to meet such demand. However, widespread deforestation is expected to negatively affect crop productivity via multiple pathways (e.g., thermal regulation, rainfall, local moisture, pest control, among others). To quantify how deforestation affects crop productivity, we modeled the relationship between forest amount and enhanced vegetation index (EVI—a proxy for crop productivity) during the soybean planting season across southern Amazonia. Our hypothesis that forest amount causes increased crop productivity received strong support. We found that the maximum MODIS-based EVI in soybean fields increased as a function of forest amount across three spatial-scales, 0.5 km, 1 km, 2 km, 5 km, 10 km, 15 km and 20 km. However, the strength of this relationship varied across years and with precipitation, but only at the local scale (e.g., 500 meters and 1 km radius). Our results highlight the importance of considering forests to design sustainable landscapes.

Nanotechnology for forest products. Part 1

Science.gov (United States)

Theodore Wegner; Phil Jones

2005-01-01

Nano-sized particles may be small, but for our industry they offer huge potential. Nanotechnology represents a major opportunity for the forest products industry to develop new products, substantially reduce processing costs, and open new markets in the coming decades.

From failure to value: economic valuation for a selected set of products and services from Mediterranean forests

Energy Technology Data Exchange (ETDEWEB)

Masiero, M.; Pettenella, D.; Secco, L.

2016-07-01

Aim of study: the paper estimates the economic value of a selected range of forest products and services, i.e. roundwood, non-wood forest products (NWFPs), and carbon-related services. Area of study: the research covers 21 Mediterranean countries, distinguished into four sub-regions. Material and methods: data have been gathered from official statistical sources (e.g. FAOSTAT), scientific literature and technical reports. Different estimation approaches based on market-price have been used for different products/services. Main results: the estimated value ranges between €10,512 and €11,158 million (M). Wood products represent more than 85% of the total value. Within them, industrial timber is the most relevant component (65%). Figures for NWFPs are likely to be underestimated because data are available only for some products and countries. When using alternative estimates for pine nuts, pine resin and cork, figures show a €36.8-572 M increase. In geographical terms, the economic value of Mediterranean forests is highly concentrated: North-West Mediterranean countries account for 70%, and nearly 90% is in just four countries (France, Spain, Turkey and Italy). Research highlights: enhancing the offer of Mediterranean forest products and increasing their role in the rural economy could help to reduce the costs of forest protection: a well-structured forest economy ensuring stable flows of incomes can provide a fundamental set of public non-market services and social values to both local people and the whole community. Understanding the true value of natural resources, then, is an essential step for promoting their protection and sustainable use. (Author)

Water Balance and Forest Productivity in Mediterranean Mountain Environments

Directory of Open Access Journals (Sweden)

Giuseppe Scarascia-Mugnozza

2010-06-01

Full Text Available The availability of water resources is one of the major drivers affecting forest and agricultural productivity. The sensitivity of Mediterranean forest species to water shortage is becoming even more relevant in relation to climate changes, that for Southern Europe could lead to an increase in temperature of 2 to 3 °C, paralleled by a decrease of 5 to 15% of summer rainfall. It is then important to study the relationship between water balance and productivity of important forest tree species such as beech and mountain pines that represent the upper limit of forest vegetation in almost all the Apennines range. In the present paper, the measurements of water balance, evapotranspiration, carbon exchange and productivity in beech and pine forests of central-southern Italy (Abruzzo and Calabria regions are reported. The results are obtained in the course of several years of experimentation with innovative techniques and integrated at the canopy level.

Bioenergy production and forest landscape change in the southeastern United States

Science.gov (United States)

Costanza, Jennifer K.; Abt, Robert C.; McKerrow, Alexa; Collazo, Jaime A.

2016-01-01

Production of woody biomass for bioenergy, whether wood pellets or liquid biofuels, has the potential to cause substantial landscape change and concomitant effects on forest ecosystems, but the landscape effects of alternative production scenarios have not been fully assessed. We simulated landscape change from 2010 to 2050 under five scenarios of woody biomass production for wood pellets and liquid biofuels in North Carolina, in the southeastern United States, a region that is a substantial producer of wood biomass for bioenergy and contains high biodiversity. Modeled scenarios varied biomass feedstocks, incorporating harvest of ‘conventional’ forests, which include naturally regenerating as well as planted forests that exist on the landscape even without bioenergy production, as well as purpose-grown woody crops grown on marginal lands. Results reveal trade-offs among scenarios in terms of overall forest area and the characteristics of the remaining forest in 2050. Meeting demand for biomass from conventional forests resulted in more total forest land compared with a baseline, business-as-usual scenario. However, the remaining forest was composed of more intensively managed forest and less of the bottomland hardwood and longleaf pine habitats that support biodiversity. Converting marginal forest to purpose-grown crops reduced forest area, but the remaining forest contained more of the critical habitats for biodiversity. Conversion of marginal agricultural lands to purpose-grown crops resulted in smaller differences from the baseline scenario in terms of forest area and the characteristics of remaining forest habitats. Each scenario affected the dominant type of land-use change in some regions, especially in the coastal plain that harbors high levels of biodiversity. Our results demonstrate the complex landscape effects of alternative bioenergy scenarios, highlight that the regions most likely to be affected by bioenergy production are also critical for

A U.S. Forest Service special forest products appraisal system: background, methods, and assessment.

Science.gov (United States)

Jerry Smith; Lisa K. Crone; Susan J. Alexander

2010-01-01

Increasing concern over the management and harvest of special forest products (SFP) from national forest lands has led to the development of new Forest Service policy directives. In this paper, we present a brief history of SFPs in the Western United States, highlighting the issues that necessitated new management direction. The new policy directives that led to the...

Nontimber Forest Products in the Rural Household Economy

Science.gov (United States)

Erin O. Sills; Sharachchandra Lele; Thomas P. Holmes; Subhrendu K. Pattanayak

2003-01-01

Among the multiple outputs of forests, the category labeled nontimber forest products, or NTFPs, has drawn increased policy and research attention during the past 20 years. NTFPs have become recognized for their importance in the livelihoods of the many relatively poor households who live in or near forests, especially in the tropics. Policy concern about NTFPs takes...

FRM: ADVANCED FOREST PRODUCTS MARKETING

African Journals Online (AJOL)

user

techniques and high cost of transportation are some of the problems encountered in the production and marketing of prosopis condiment in Makurdi metropolis. Key words: ... this, forest managers should no longer be concerned solely with ...

Medicinal and dietary supplements: specialty forest products with a long tradition

Science.gov (United States)

James L. Chamberlain; A.L. Hammett

1999-01-01

Over the last five years forest products other than timber-based products have received a great deal of attention. The markets for medicinal plants that are collected from the forests are growing rapidly. Some reports suggest this segment of the non-timber forest products industry is expanding faster than the timber-based industry. Plants used for their therapeutic...

New methods for estimating non-timber forest product output: an Appalachian case study

Science.gov (United States)

Steve Kruger; James. Chamberlain

2015-01-01

Assessing the size and structure of non-timber forest product (NTFP) markets is difficult due to a lack of knowledge about NTFP supply chains. Harvesting ginseng and other wild medicinal plants has long provided a source of income and cultural identity in Appalachian communities in the eastern United States. With the exception of ginseng, the extent of the harvest of...

Species mixing effects on forest productivity in the Netherlands

NARCIS (Netherlands)

Lu, Huicui

2017-01-01

Many monoculture forests (dominated by a single tree species) have been converted to mixed-species forests (dominated by more than one tree species) in Europe over the last decades. The main reason for this conversion was to increase productivity, including timber production, and enhance other

Global power production scenarios to 2100 and the dual role of forests: accelerated climate damage or regulating and provisioning ecosystem services?

DEFF Research Database (Denmark)

Callesen, Ingeborg

The worlds' electrical power production is depending on the current energy infrastructure, and future investments in new power supply facilities using renewable and non-renewable energy sources. Continued growth in power production in the 21st century will cause global environmental change (GEC......). GEC with climate change as an important driver will affect the environment and the economy in multiple ways that can be summarized as losses of biodiversity and changing ecosystem services (ES), but with very diverse temporal and spatial impacts. In a simple global growth model for power production......, including non-renewable and renewable energy sources, the potential role of forest biomass is investigated. The demands for forest ecosystem services imposed by the global power production are assessed in the present study. Three global power supply scenarios to 2050 with different emphasis...

Factors influencing the role of Non-Wood Forest Products and Services

NARCIS (Netherlands)

Janse, G.; Ottitsch, A.

2005-01-01

In the light of social and economic developments, forest functions other than timber production have gained international importance and recognition. Resulting from this development, Non-Wood Forest Products and Services (NWFPS) are becoming more important, both for the general public as for forest

Under What Circumstances Do Wood Products from Native Forests Benefit Climate Change Mitigation?

Directory of Open Access Journals (Sweden)

Heather Keith

Full Text Available Climate change mitigation benefits from the land sector are not being fully realised because of uncertainty and controversy about the role of native forest management. The dominant policy view, as stated in the IPCC's Fifth Assessment Report, is that sustainable forest harvesting yielding wood products, generates the largest mitigation benefit. We demonstrate that changing native forest management from commercial harvesting to conservation can make an important contribution to mitigation. Conservation of native forests results in an immediate and substantial reduction in net emissions relative to a reference case of commercial harvesting. We calibrated models to simulate scenarios of native forest management for two Australian case studies: mixed-eucalypt in New South Wales and Mountain Ash in Victoria. Carbon stocks in the harvested forest included forest biomass, wood and paper products, waste in landfill, and bioenergy that substituted for fossil fuel energy. The conservation forest included forest biomass, and subtracted stocks for the foregone products that were substituted by non-wood products or plantation products. Total carbon stocks were lower in harvested forest than in conservation forest in both case studies over the 100-year simulation period. We tested a range of potential parameter values reported in the literature: none could increase the combined carbon stock in products, slash, landfill and substitution sufficiently to exceed the increase in carbon stock due to changing management of native forest to conservation. The key parameters determining carbon stock change under different forest management scenarios are those affecting accumulation of carbon in forest biomass, rather than parameters affecting transfers among wood products. This analysis helps prioritise mitigation activities to focus on maximising forest biomass. International forest-related policies, including negotiations under the UNFCCC, have failed to recognize

University of Maine Integrated Forest Product Refinery (IFPR) Technology Research

Energy Technology Data Exchange (ETDEWEB)

Pendse, Hemant P.

2010-11-23

This project supported research on science and technology that forms a basis for integrated forest product refinery for co-production of chemicals, fuels and materials using existing forest products industry infrastructure. Clear systems view of an Integrated Forest Product Refinery (IFPR) allowed development of a compelling business case for a small scale technology demonstration in Old Town ME for co-production of biofuels using cellulosic sugars along with pulp for the new owners of the facility resulting in an active project on Integrated Bio-Refinery (IBR) at the Old Town Fuel & Fiber. Work on production of advanced materials from woody biomass has led to active projects in bioplastics and carbon nanofibers. A lease for 40,000 sq. ft. high-bay space has been obtained to establish a Technology Research Center for IFPR technology validation on industrially relevant scale. UMaine forest bioproducts research initiative that began in April 2006 has led to establishment of a formal research institute beginning in March 2010.

Varying rotation lengths in northern production forests: Implications for habitats provided by retention and production trees.

Science.gov (United States)

Felton, Adam; Sonesson, Johan; Nilsson, Urban; Lämås, Tomas; Lundmark, Tomas; Nordin, Annika; Ranius, Thomas; Roberge, Jean-Michel

2017-04-01

Because of the limited spatial extent and comprehensiveness of protected areas, an increasing emphasis is being placed on conserving habitats which promote biodiversity within production forest. For this reason, alternative silvicultural programs need to be evaluated with respect to their implications for forest biodiversity, especially if these programs are likely to be adopted. Here we simulated the effect of varied rotation length and associated thinning regimes on habitat availability in Scots pine and Norway spruce production forests, with high and low productivity. Shorter rotation lengths reduced the contribution made by production trees (trees grown for industrial use) to the availability of key habitat features, while concurrently increasing the contribution from retention trees. The contribution of production trees to habitat features was larger for high productivity sites, than for low productivity sites. We conclude that shortened rotation lengths result in losses of the availability of habitat features that are key for biodiversity conservation and that increased retention practices may only partially compensate for this. Ensuring that conservation efforts better reflect the inherent variation in stand rotation lengths would help improve the maintenance of key forest habitats in production forests.

Assessing socioeconomic impacts of climate change on U.S. forests, wood-product markets, and forest recreation

Science.gov (United States)

Lloyd C. Irland; Darius Adams; Ralph Alig; Carter J. Betz; Chi-Chung Chen; Mark Hutchins; Bruce A. McCarl; Ken Skog; Brent L. Sohngen

2001-01-01

In this paper we discuss the problems of projecting social and economic changes affecting forests and review recent efforts to assess the wood-market impacts of possible climate changes. To illustrate the range of conditions encountered in projecting socioeconomic change linked to forests, we consider two markedly different uses: forest products markets and forest...

36 CFR 223.278 - Sale of forest botanical products and collection of fees.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Sale of forest botanical..., DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Forest Botanical Products § 223.278 Sale of forest botanical products and collection of fees. The responsible Forest Officer shall...

Technical change in forest sector models: the global forest products model approach

Science.gov (United States)

Joseph Buongiorno; Sushuai Zhu

2015-01-01

Technical change is developing rapidly in some parts of the forest sector, especially in the pulp and paper industry where wood fiber is being substituted by waste paper. In forest sector models, the processing of wood and other input into products is frequently represented by activity analysis (input–output). In this context, technical change translates in changes...

Information system of forest growth and productivity by site quality type and elements of forest

Science.gov (United States)

Khlyustov, V.

2012-04-01

Information system of forest growth and productivity by site quality type and elements of forest V.K. Khlustov Head of the Forestry Department of Russian State Agrarian University named after K.A.Timiryazev doctor of agricultural sciences, professor The efficiency of forest management can be improved substantially by development and introduction of principally new models of forest growth and productivity dynamics based on regionalized site specific parameters. Therefore an innovative information system was developed. It describes the current state and gives a forecast for forest stand parameters: growth, structure, commercial and biological productivity depend on type of site quality. In contrast to existing yield tables, the new system has environmental basis: site quality type. The information system contains set of multivariate statistical models and can work at the level of individual trees or at the stand level. The system provides a graphical visualization, as well as export of the emulation results. The System is able to calculate detailed description of any forest stand based on five initial indicators: site quality type, site index, stocking, composition, and tree age by elements of the forest. The results of the model run are following parameters: average diameter and height, top height, number of trees, basal area, growing stock (total, commercial with distribution by size, firewood and residuals), live biomass (stem, bark, branches, foliage). The system also provides the distribution of mentioned above forest stand parameters by tree diameter classes. To predict the future forest stand dynamics the system require in addition the time slot only. Full set of forest parameters mention above will be provided by the System. The most conservative initial parameters (site quality type and site index) can be kept in the form of geo referenced polygons. In this case the system would need only 3 dynamic initial parameters (stocking, composition and age) to

Experiences in the containerized tree seedlings forest nurseries production

Directory of Open Access Journals (Sweden)

Eduardo González-Izquierdo

2014-12-01

Full Text Available The work summarizes the results of the research carried out by the team of forest nurseries at Sustainable Forest Management Group in Pinar del Río University Forest Research Centre in the last 25 years. The characteristics of seedlings quality are presented, the best growing media, the water management to harden the forest species under the ecological conditions of more and more lingering periods of drought. The studied forest species were: Talipariti elatum (Sw. Fryxell, Pinus tropicalis Morelet , Swietenia mahagon(L.Jacq. Swietenia macrophylla King, Caesalpinia violacea (Mill. Stand, Genipa americana L, Gerascanthus gerascanthoides (Kunth Borhidi y Cedrela odorata L. y Eucalyptus grandis Hill ex Maiden. The main results can be summarized in the following way: the size of the containers oscillates between 90 and 300 cubic centimeters; the growing media combines organic and composted components fundamentally of Pinus caribaea and Eucalyptus ssp bark., with proportions that they vary according to the species and the disposability of these components in the nurseries where the plants take place; for the water management hardening procedures were used by watering in last month of the cultivation. In general the economic analyses demonstrated the decrease of the production costs for seedlings with the employment of this novel technology, the same as their advantages on the traditional technology of seedlings production in polybags: humanization of manpower work in forest nursery, reduction of costs production, improvement of produced seedling quality and productivity increase of their workers.

Hydro-economic modeling of the role of forests on water resources production in Andalusia, Spain

Science.gov (United States)

Beguería, Santiago; Serrano-Notivoli, Roberto; Álvarez-Palomino, Alejandro; Campos, Pablo

2014-05-01

The development of more refined information tools is a pre-requisite for supporting decision making in the context of integrated water resources management. Among these tools, hydro-economic models are favoured because they allow integrating the ecological, hydrological, infrastructure and economic aspects into a coherent, scientifically-informed framework. We present a case study that assesses physically the water resources of forest lands of the Andalusia region in Spain and conducts an economic environmental income and asset valuation of the forest surface water yield. We show how, based on available hydrologic and economic data, we can develop a comprehensive water account for all the forest lands at the regional scale. This forest water environmental valuation is part of the larger RECAMAN project, which aims at providing a robust and easily replicable accounting tool to evaluate yearly the total income an capital generated by the forest land, encompassing all measurable sources of private and public incomes (timber and cork production, auto-consumption, recreational activities, biodiversity conservation, carbon sequestration, water production, etc.). Only a comprehensive integrated tool such as the one built within the RECAMAN project may serve as a basis for the development of integrated policies such as those internationally agreed and recommended for the management of water resources.

Nontimber forest products in the United States: an analysis for the 2015 National Sustainable Forest Report

Science.gov (United States)

James Chamberlain; Aaron Teets; Steve Kruger

2018-01-01

Worldwide, forest plants and fungi that are harvested for their nontimber products are critical for the health of the ecosystems and the well-being of people who benefit from the harvest. This document provides an analysis of the volumes and values of nontimber forest products in the United States. It presents...

Use of Current 2010 Forest Disturbance Monitoring Products for the Conterminous United States in Aiding a National Forest Threat Early Warning System

Science.gov (United States)

Spruce, Joseph P.; Hargrove, William; Gasser, J.; Smoot, J.; Kuper, P.

2010-01-01

This presentation discusses contributions of near real time (NRT) MODIS forest disturbance detection products for the conterminous United States to an emerging national forest threat early warning system (EWS). The latter is being developed by the USDA Forest Service s Eastern and Western Environmental Threat Centers with help from NASA Stennis Space Center and the Oak Ridge National Laboratory. Building off work done in 2009, this national and regional forest disturbance detection and viewing capability of the EWS employs NRT MODIS NDVI data from the USGS eMODIS group and historical NDVI data from standard MOD13 products. Disturbance detection products are being computed for 24 day composites that are refreshed every 8 days. Products for 2010 include 42 dates of the 24 day composites. For each compositing date, we computed % change in forest maximum NDVI products for 2010 with respect to each of three historical baselines of 2009, 2007-2009, and 2003-2009,. The three baselines enable one to view potential current, recent, and longer term forest disturbances. A rainbow color table was applied to each forest change product so that potential disturbances (NDVI drops) were identified in hot color tones and growth (NDVI gains) in cold color tones. Example products were provided to end-users responsible for forest health monitoring at the Federal and State levels. Large patches of potential forest disturbances were validated based on comparisons with available reference data, including Landsat and field survey data. Products were posted on two internet mapping systems for US Forest Service internal and collaborator use. MODIS forest disturbance detection products were computed and posted for use in as little as 1 day after the last input date of the compositing period. Such products were useful for aiding aerial disturbance detection surveys and for assessing disturbance persistence on both inter- and intra-annual scales. Multiple 2010 forest disturbance events were

Integrating forest products with ecosystem services: a global perspective

Science.gov (United States)

Robert L. Deal; Rachel. White

2012-01-01

Around the world forests provide a broad range of vital ecosystem services. Sustainable forest management and forest products play an important role in global carbon management, but one of the major forestry concerns worldwide is reducing the loss of forestland from development. Currently, deforestation accounts for approximately 20% of total greenhouse gas emissions....

Simulating forest productivity and surface-atmosphere carbon exchange in the BOREAS study region

Energy Technology Data Exchange (ETDEWEB)

Kimball, J.S.; Thornton, P.E.; White, M.A.; Running, S.W. [Montana Univ., Missoula, MT (United States). School of Forestry

1997-12-31

Studies have shown that the boreal forest region is in danger of experiencing significant warming and drying in response to increases in atmospheric CO{sub 2} concentration and other greenhouse gases. Since the boreal forest region contains 16-24 per cent of the world`s soil carbon, warming in this region could result in a rapid, large-scale displacement and redistribution of boreal forest, enhanced release of CO{sub 2} to the atmosphere, and an intensification of global warming. A study was conducted in which a process-based, general ecosystem model (BIOME-BGC) was used to simulate daily gross primary production, maintenance and heterotrophic respiration, net primary production and net ecosystem carbon exchange of boreal aspen, jack pine and black spruce. The objective was to integrate point measurements across multiple spatial and temporal scales using process level models of the boreal forest water, energy and biogeochemical cycles. Climate characteristics that control simulated carbon fluxes were also studied. Results showed that trees with large daily evapotranspiration rates and those situated on sandy soils with low water holding capacities were especially vulnerable to increased temperature and drought conditions. Trees subject to frequent water stress during the growing season, particularly older trees that exhibit low photosynthetic and high respiration rates, were on the margin between being annual net sources or sinks for atmospheric carbon. 71 refs., 3 tabs., 5 figs.

Legal Harvesting, Sustainable Sourcing and Cascaded Use of Wood for Bioenergy: Their Coverage through Existing Certification Frameworks for Sustainable Forest Management

Directory of Open Access Journals (Sweden)

Richard Sikkema

2014-09-01

Full Text Available The first objective of this paper was to provide an inventory of developments of certification schemes for sustainable biomass production, following recent EU legislation (both formalized and under development. One main pillar is the EU Timber Regulation for legal harvesting; a second one is the EU’s 2010 recommendations for sustainable woody biomass sourcing for energy; the third one is the EU Waste Directive. The second objective was to benchmark the coverage of this (draft legislation, when wood product certificates for sustainable forest management (SFM are used as proof of the related legislative requirements. We studied North America, as it is a major biomass supplier to the EU-28. Together with existing forest legislation in the US and Canada, SFM certificates are actively used to cover the EU’s (draft legislation. However, North American forests are only partially certified with fibers coming from certified forests; these are referred to as forest management (FM fibers. Other certified fibers should come from complementary risk assessments downstream in the supply chain (risk based fibers. Our benchmark concludes that: (a FM fiber certification by the Forest Stewardship Council (FSC and the Program for the Endorsement of Forest Certification (PEFC international standards show the highest level of coverage with EU’s (draft legislation; (b There is insufficient coverage for risk based fibers by FSC Controlled Wood (FSC-CW, PEFC Due Diligence (PEFC-DD, or SFI-fiber sourcing (SFI-FS. Other weaknesses identified for elaboration are: (c Alignment in definitions are needed, such as for primary forest, high carbon stock, and wood waste (cascading; (d Imperfect mass balance (fiber check downstream needs to be solved, as non-certified fiber flows are inadequately monitored; (e Add-on of a GHG calculation tool is needed, as GHG life cycle reporting is not covered by any of the SFM frameworks.

SUSTAINABLE MANAGEMENT OF CAMEROON FORESTS RESOURCES: PROVIDING TIMBER WASTE TO THE POOR POPULATIONS AS ALTERNATIVE SOURCE OF ENERGY

Directory of Open Access Journals (Sweden)

Serge Benjamin Noumo Foko

2014-01-01

Full Text Available Cameroon is covered by about 20 million hectares of forests. Timber exploitation is the second source of external income after petroleum. Besides, Cameroon’s forest has several other functions. Yet the threat to the very existence and survival of this forest is rapidly increasing due to overexploitation by logging companies and for firewood. Despite its usefulness, a substantial volume of the wood felled by timber exploiters is abandoned as waste to rot. This waste can be used as firewood by households even for building and making of furniture by small-scale users like carpenters if they had access to it. This paper encourages the use of timber waste as an alternative to kerosene, which has become very expensive and unaffordable due to the general rise in the price of petroleum products in recent years. The overexploitation of forests can therefore be limited by putting the waste timber into use. It will go along to reduce freshly cut wood which is usually cut illegally and uncontrollably and which is a major source of depletion of forest resources. This project, once achieved will forever last because it will always generate revenue to the groups involve in the collection and the distribution of forest waste which will make money from sales even if they were to sell cheaper since the major cost is transportation and the waste wood is also cheap to obtain from the logging companies or even costless since they have less interest in it.

Forest products cluster development in central Arizona—implications for landscape-scale forest restoration

Science.gov (United States)

David. Nicholls

2014-01-01

Since 2004, close to 50,000 ac of hazardous fuels have been mechanically treated in east-central Arizona as part of the USDA Forest Service's first 10-year stewardship project on national forest lands. The need for coordinated wood products and biomass utilization in Arizona is likely to increase as broad-scale restoration treatments across Arizona's national...

DEVELOPING AN INDEX FOR FOREST PRODUCTIVITY MAPPING - A CASE STUDY FOR MARITIME PINE PRODUCTION REGULATION IN PORTUGAL

Directory of Open Access Journals (Sweden)

Susana Mestre

2018-02-01

Full Text Available ABSTRACT Productivity is very dependent on the environmental and biotic factors present at the site where the forest species of interest is present. Forest site productivity is usually assessed using empirical models applied to inventory data providing discrete predictions. While the use of GIS-based models enables building a site productivity distribution map. Therefore, the aim of this study was to derive a productivity index using multivariate statistics and coupled GIS-geostatistics to obtain a forest productivity map. To that end, a study area vastly covered by naturally regenerated forests of maritime pine in central Portugal was used. First, a productivity index (PI was built based on Factorial Correspondence Analysis (FCA by incorporating a classical site index for the species and region (Sh25 - height index model and GIS-derived environmental variables (slope and aspect. After, the PI map was obtained by multi-Gaussian kriging and used as a GIS layer to evaluate maritime pine areas by productivity class (e.g., low, intermediate and high. In the end, the area control method was applied to assess the size and the number of compartments to establish by productivity class. The management compartments of equal productivity were digitized as GIS layer and organized in a temporal progression of stands’ age regularly available for cutting each year during a 50-year schedule. The methodological approach developed in this study proved that can be used to build forest productivity maps which are crucial tools to support forest production regulation.

Utilizing a Multi-Source Forest Inventory Technique, MODIS Data and Landsat TM Images in the Production of Forest Cover and Volume Maps for the Terai Physiographic Zone in Nepal

Directory of Open Access Journals (Sweden)

Kalle Eerikäinen

2012-12-01

Full Text Available An approach based on the nearest neighbors techniques is presented for producing thematic maps of forest cover (forest/non-forest and total stand volume for the Terai region in southern Nepal. To create the forest cover map, we used a combination of Landsat TM satellite data and visual interpretation data, i.e., a sample grid of visual interpretation plots for which we obtained the land use classification according to the FAO standard. These visual interpretation plots together with the field plots for volume mapping originate from an operative forest inventory project, i.e., the Forest Resource Assessment of Nepal (FRA Nepal project. The field plots were also used in checking the classification accuracy. MODIS satellite data were used as a reference in a local correction approach conducted for the relative calibration of Landsat TM images. This study applied a non-parametric k-nearest neighbor technique (k-NN to the forest cover and volume mapping. A tree height prediction approach based on a nonlinear, mixed-effects (NLME modeling procedure is presented in the Appendix. The MODIS image data performed well as reference data for the calibration approach applied to make the Landsat image mosaic. The agreement between the forest cover map and the field observed values of forest cover was substantial in Western Terai (KHAT 0.745 and strong in Eastern Terai (KHAT 0.825. The forest cover and volume maps that were estimated using the k-NN method and the inventory data from the FRA Nepal project are already appropriate and valuable data for research purposes and for the planning of forthcoming forest inventories. Adaptation of the methods and techniques was carried out using Open Source software tools.

Forests and ozone: productivity, carbon storage, and feedbacks.

Science.gov (United States)

Wang, Bin; Shugart, Herman H; Shuman, Jacquelyn K; Lerdau, Manuel T

2016-02-22

Tropospheric ozone is a serious air-pollutant, with large impacts on plant function. This study demonstrates that tropospheric ozone, although it damages plant metabolism, does not necessarily reduce ecosystem processes such as productivity or carbon sequestration because of diversity change and compensatory processes at the community scale ameliorate negative impacts at the individual level. This study assesses the impact of ozone on forest composition and ecosystem dynamics with an individual-based gap model that includes basic physiology as well as species-specific metabolic properties. Elevated tropospheric ozone leads to no reduction of forest productivity and carbon stock and to increased isoprene emissions, which result from enhanced dominance by isoprene-emitting species (which tolerate ozone stress better than non-emitters). This study suggests that tropospheric ozone may not diminish forest carbon sequestration capacity. This study also suggests that, because of the often positive relationship between isoprene emission and ozone formation, there is a positive feedback loop between forest communities and ozone, which further aggravates ozone pollution.

75 FR 64617 - National Forest Products Week, 2010

Science.gov (United States)

2010-10-20

... our stewardship and efforts to further their conservation. Our Nation's forests provide us with clean... 21st-century conservation agenda that will reconnect Americans with the outdoors and protect our Nation... sectors. They not only help bring forest products to market, but also spur innovative ways to move our...

Business Management Practices for Small to Medium Sized Forest Products Firms

OpenAIRE

Espinoza, Omar Alejandro; Smith, Robert L. (Robert Lee), 1955 August 21-

2015-01-01

Provides the information required to start a small forest products company by discussing the U.S. forest products industry, business management, strategic planning, business plans, and management of human resources, marketing, operations, and finances. This project was supported by the Wood Education and Resource Center, Northeastern Area State and Private Forestry, Forest Service, U.S. Department of Agriculture, award number: 2010-DG-148.

Trends in global shipping and the impact on Alaska’s forest products

Science.gov (United States)

Joseph A. Roos; Allen M. Brackley; Daisuke. Sasatani

2011-01-01

Traditionally, there has been a strong forest products trade between Alaska and Asia. This trade relationship has developed owing to Alaska’s proximity to Asia and, in the past, an abundance of high-quality timber. Although forest products markets in North America remain soft, markets in Asia are growing. However, to benefit from Asia’s growing forest products market,...

The Impact of Source Distribution on Scalar Transport over Forested Hills

Science.gov (United States)

Ross, Andrew N.; Harman, Ian N.

2015-08-01

Numerical simulations of neutral flow over a two-dimensional, isolated, forested ridge are conducted to study the effects of scalar source distribution on scalar concentrations and fluxes over forested hills. Three different constant-flux sources are considered that span a range of idealized but ecologically important source distributions: a source at the ground, one uniformly distributed through the canopy, and one decaying with depth in the canopy. A fourth source type, where the in-canopy source depends on both the wind speed and the difference in concentration between the canopy and a reference concentration on the leaf, designed to mimic deposition, is also considered. The simulations show that the topographically-induced perturbations to the scalar concentration and fluxes are quantitatively dependent on the source distribution. The net impact is a balance of different processes affecting both advection and turbulent mixing, and can be significant even for moderate topography. Sources that have significant input in the deep canopy or at the ground exhibit a larger magnitude advection and turbulent flux-divergence terms in the canopy. The flows have identical velocity fields and so the differences are entirely due to the different tracer concentration fields resulting from the different source distributions. These in-canopy differences lead to larger spatial variations in above-canopy scalar fluxes for sources near the ground compared to cases where the source is predominantly located near the canopy top. Sensitivity tests show that the most significant impacts are often seen near to or slightly downstream of the flow separation or reattachment points within the canopy flow. The qualitative similarities to previous studies using periodic hills suggest that important processes occurring over isolated and periodic hills are not fundamentally different. The work has important implications for the interpretation of flux measurements over forests, even in

Use of Non Wood Forest Products by local people bordering the “Parc National Kaboré Tambi”, Burkina Faso

DEFF Research Database (Denmark)

Gausset, Quentin

2008-01-01

this issue in the case of the “Parc National Kaboré Tambi” in Burkina Faso, by proposing a combination of ethno-botanical surveys and botanical inventories. The article analyses the importance of the park plant species, identify the constraints faced by local people to harvest the park plant products...... people. As a consequence, approaches of participatory planning of forest management schemes have become necessary. A major challenge has been the issue of how to (use?) scientific knowledge and local knowledge in the most appropriate way. This article provides an account of a contribution to addressing....... They harvest in the park Non Wood Forest Products (NWFPs), although the Forest Code bans free access. About one hundred plants species are used, but the pattern of extraction of the products or some plant parts could destroy the resource base. Technically, conservation by domestication of the source species...

An outlook for sustainable forest bioenergy production in the Lake States

Science.gov (United States)

Dennis R. Becker; Kenneth Skog; Allison Hellman; Kathleen E. Halvorsen; Terry Mace

2009-01-01

The Lake States region of Minnesota, Wisconsin and Michigan offers significant potential for bioenergy production. We examine the sustainability of regional forest biomass use in the context of existing thermal heating, electricity, and biofuels production, projected resource needs over the next decade including existing forest product market demand, and impacts on...

Consequences of increasing bioenergy demand on wood and forests: An application of the Global Forest Products Model

Science.gov (United States)

Buongiorno, J.; Raunikar, R.; Zhu, S.

2011-01-01

The Global Forest Products Model (GFPM) was applied to project the consequences for the global forest sector of doubling the rate of growth of bioenergy demand relative to a base scenario, other drivers being maintained constant. The results showed that this would lead to the convergence of the price of fuelwood and industrial roundwood, raising the price of industrial roundwood by nearly 30% in 2030. The price of sawnwood and panels would be 15% higher. The price of paper would be 3% higher. Concurrently, the demand for all manufactured wood products would be lower in all countries, but the production would rise in countries with competitive advantage. The global value added in wood processing industries would be 1% lower in 2030. The forest stock would be 2% lower for the world and 4% lower for Asia. These effects varied substantially by country. ?? 2011 Department of Forest Economics, SLU Ume??, Sweden.

Operational Forest Monitoring in Siberia Using Multi-source Earth Observation Data

Directory of Open Access Journals (Sweden)

C. Hüttich

2014-08-01

Full Text Available Forest cover disturbance rates are increasing in the forests of Siberia due to intensification of human activities and climate change. In this paper two satellite data sources were used for automated forest cover change detection. Annual ALOS PALSAR backscatter mosaics (2007–2010 were used for yearly forest loss monitoring. Time series of the Enhanced Vegetation Index (EVI, 2000–2014 from the Moderate Resolution Imaging Spectroradiometer (MODIS were integrated in a web-based data middleware system to assess the capabilities of a near-real time detection of forest disturbances using the break point detection by additive season and trends (Bfast method. The SAR-based average accuracy of the forest loss detection was 70 %, whereas the MODIS-based change assessment using breakpoint detection achieved average accuracies of 50 % for trend-based breakpoints and 43.4 % for season-based breakpoints. It was demonstrated that SAR remote sensing is a highly accurate tool for up-to-date forest monitoring. Web-based data middleware systems like the Earth Observation Monitor, linked with MODIS time series, provide access and easy-to-use tools for on demand change monitoring in remote Siberian forests.

Policy Recommendation from Stakeholders to Improve Forest Products Transportation: A Qualitative Study

Directory of Open Access Journals (Sweden)

Anil Koirala

2017-11-01

Full Text Available With recently announced federal funding and subsidies to redevelop vacant mills and the communities they were in, the forest products industry in Maine is poised to gain its momentum once again. One of the important components influencing the cost of delivered forest products is transportation. A recent study in the region has shown that the location and availability of markets along with lack of skilled labor force are the major challenges faced by the forest products transportation sector in Maine. This study was focused on developing a management guideline which included various field level options for improving trucking enterprises in Maine. For this, a qualitative research approach utilizing a case study research tradition was employed, with in-depth semi-structured interviews with professionals directly related to the forest products transportation sector used for data generation. Thirteen semi-structured interviews were conducted, with each being audio recorded and later transcribed verbatim. Interview transcriptions were analyzed using NVivo 11. Suggestions, like increasing benefits to drivers and providing training, were proposed for challenges related to manpower shortage, while the marketing of new forest products and adjustment in some state-level policies were proposed for challenges related to the forest products market condition of the state.

Energy from forests: environmental and wildlife implications

Energy Technology Data Exchange (ETDEWEB)

Pimentel, D [Cornell Univ., Ithaca, NY; Chick, S; Vergara, W

1981-09-01

This report analyzes the feasibility of utilizing forests in North America as an energy source. The analysis focuses on three major aspects: (1) the technology of converting wood biomass to energy; (2) the potential of wood as a source of energy; and (3) the environmental implications of using forest products for energy. 49 references, 6 tables.

Special Forest Products on the Green Mountain and Finger Lakes National Forests: a research-based approach to management

Science.gov (United States)

Marla R. Emery; Clare. Ginger

2014-01-01

Special forest products (SFPs) are gathered from more than 200 vascular and fungal species on the Green Mountain National Forest (GMNF) and Finger Lakes National Forest (FLNF). This report documents those SFPs and proposes an approach to managing them in the context of legislation directing the U.S. Forest Service to institute a program of active SFP management. Based...

Machinery for Forest Chip Production in Finland in 2007 and in the Future

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, Kalle (Metsaeteho Oy, P.O. Box 101, FI-00171 Helsinki (Finland))

2008-10-15

Metsaeteho Oy's study consisted of a survey of the production machinery for forest chips used by energy plants in 2007. The major forest chip suppliers in Finland were involved in the study. In addition, the machinery and equipment stocked by the manufacturers and vendors of energy wood harvester heads, stump lifting devices, and chippers were also surveyed. The study provided also an estimate of future machinery requirements for forest chip production in Finland. The study estimated that a total of 1,100 machine and truck units were employed in the production of forest chips for energy plants in 2007. A total of 770 machine and truck units were contracted for the major forest chip suppliers in 2007. Increasing forest chip consumption will considerable increase the demand for additional forest chip production resources in the future. If the consumption of forest chips by energy plants in 2015 reaches 15 TWh, i.e. about 7.5 mill. m3, then the forest machine and truck requirement will be over 1,700 units. The corresponding machinery requirement at an energy plant with a forest chip consumption of 25 TWh (approx. 12.5 mill. m3), will be close to 2,300 machine and truck units

Tracing the Sources of Atmospheric Phosphorus Deposition to a Tropical Rain Forest in Panama Using Stable Oxygen Isotopes.

Science.gov (United States)

Gross, A; Turner, B L; Goren, T; Berry, A; Angert, A

2016-02-02

Atmospheric dust deposition can be a significant source of phosphorus (P) in some tropical forests, so information on the origins and solubility of atmospheric P is needed to understand and predict patterns of forest productivity under future climate scenarios. We characterized atmospheric dust P across a seasonal cycle in a tropical lowland rain forest on Barro Colorado Nature Monument (BCNM), Republic of Panama. We traced P sources by combining remote sensing imagery with the first measurements of stable oxygen isotopes in soluble inorganic phosphate (δ(18)OP) in dust. In addition, we measured soluble inorganic and organic P concentrations in fine (1 μm) aerosol fractions and used this data to estimate the contribution of P inputs from dust deposition to the forest P budget. Aerosol dry mass was greater in the dry season (December to April, 5.6-15.7 μg m(-3)) than the wet season (May to November, 3.1-7.1 μg m(-3)). In contrast, soluble P concentrations in the aerosols were lower in the dry season (980-1880 μg P g(-1)) than the wet season (1170-3380 μg P g(-1)). The δ(18)OP of dry-season aerosols resembled that of nearby forest soils (∼19.5‰), suggesting a local origin. In the wet season, when the Trans-Atlantic Saharan dust belt moves north close to Panama, the δ(18)OP of aerosols was considerably lower (∼15.5‰), suggesting a significant contribution of long-distance dust P transport. Using satellite retrieved aerosol optical depth (AOD) and the P concentrations in aerosols we sampled in periods when Saharan dust was evident we estimate that the monthly P input from long distance dust transport during the period with highest Saharan dust deposition is 88 ± 31 g P ha(-1) month(-1), equivalent to between 10 and 29% of the P in monthly litter fall in nearby forests. These findings have important implications for our understanding of modern nutrient budgets and the productivity of tropical forests in the region under future climate scenarios.

Interpreting forest biome productivity and cover utilizing nested scales of image resolution and biogeographical analysis

Science.gov (United States)

Iverson, Louis R.; Cook, Elizabeth A.; Graham, Robin L.; Olson, Jerry S.; Frank, Thomas D.; Ying, KE

1988-01-01

The objective was to relate spectral imagery of varying resolution with ground-based data on forest productivity and cover, and to create models to predict regional estimates of forest productivity and cover with a quantifiable degree of accuracy. A three stage approach was outlined. In the first stage, a model was developed relating forest cover or productivity to TM surface reflectance values (TM/FOREST models). The TM/FOREST models were more accurate when biogeographic information regarding the landscape was either used to stratigy the landscape into more homogeneous units or incorporated directly into the TM/FOREST model. In the second stage, AVHRR/FOREST models that predicted forest cover and productivity on the basis of AVHRR band values were developed. The AVHRR/FOREST models had statistical properties similar to or better than those of the TM/FOREST models. In the third stage, the regional predictions were compared with the independent U.S. Forest Service (USFS) data. To do this regional forest cover and forest productivity maps were created using AVHRR scenes and the AVHRR/FOREST models. From the maps the county values of forest productivity and cover were calculated. It is apparent that the landscape has a strong influence on the success of the approach. An approach of using nested scales of imagery in conjunction with ground-based data can be successful in generating regional estimates of variables that are functionally related to some variable a sensor can detect.

Oregon's forest products industry: 1994.

Science.gov (United States)

Franklin R. Ward

1997-01-01

This report presents the findings of a survey of primary forest products industries in Oregon for 1994. The survey included the following sectors: lumber; veneer; pulp and board; shake and shingle; export; and post, pole, and piling. Tables, presented by sector and for the industry as a whole, include characteristics of the industry, nature and flow of logs consumed,...

Wild Harvests from Scottish Woodlands Social, cultural and economic values of contemporary non-timber forest products

Science.gov (United States)

Marla Emery; Suzanne Martin; Alison Dyke; Alison Dyke

2006-01-01

More than 30 people were interviewed about the wild edibles, medicinals, and craft materials they collect and the part that collecting plays in their lives as part of the Wild Harvests from Scottish Woodlands project. Interviews were conducted in autumn 2004. Collecting non-timber forest products (NTFPs) is a source of joy and satisfaction for many of those interviewed...

Changes in forest productivity across Alaska consistent with biome shift.

Science.gov (United States)

Beck, Pieter S A; Juday, Glenn P; Alix, Claire; Barber, Valerie A; Winslow, Stephen E; Sousa, Emily E; Heiser, Patricia; Herriges, James D; Goetz, Scott J

2011-04-01

Global vegetation models predict that boreal forests are particularly sensitive to a biome shift during the 21st century. This shift would manifest itself first at the biome's margins, with evergreen forest expanding into current tundra while being replaced by grasslands or temperate forest at the biome's southern edge. We evaluated changes in forest productivity since 1982 across boreal Alaska by linking satellite estimates of primary productivity and a large tree-ring data set. Trends in both records show consistent growth increases at the boreal-tundra ecotones that contrast with drought-induced productivity declines throughout interior Alaska. These patterns support the hypothesized effects of an initiating biome shift. Ultimately, tree dispersal rates, habitat availability and the rate of future climate change, and how it changes disturbance regimes, are expected to determine where the boreal biome will undergo a gradual geographic range shift, and where a more rapid decline. © 2011 Blackwell Publishing Ltd/CNRS.

Nut Production in Bertholletia excelsa across a Logged Forest Mosaic: Implications for Multiple Forest Use

Science.gov (United States)

Rockwell, Cara A.; Guariguata, Manuel R.; Menton, Mary; Arroyo Quispe, Eriks; Quaedvlieg, Julia; Warren-Thomas, Eleanor; Fernandez Silva, Harol; Jurado Rojas, Edwin Eduardo; Kohagura Arrunátegui, José Andrés Hideki; Meza Vega, Luis Alberto; Revilla Vera, Olivia; Valera Tito, Jonatan Frank; Villarroel Panduro, Betxy Tabita; Yucra Salas, Juan José

2015-01-01

Although many examples of multiple-use forest management may be found in tropical smallholder systems, few studies provide empirical support for the integration of selective timber harvesting with non-timber forest product (NTFP) extraction. Brazil nut (Bertholletia excelsa, Lecythidaceae) is one of the world’s most economically-important NTFP species extracted almost entirely from natural forests across the Amazon Basin. An obligate out-crosser, Brazil nut flowers are pollinated by large-bodied bees, a process resulting in a hard round fruit that takes up to 14 months to mature. As many smallholders turn to the financial security provided by timber, Brazil nut fruits are increasingly being harvested in logged forests. We tested the influence of tree and stand-level covariates (distance to nearest cut stump and local logging intensity) on total nut production at the individual tree level in five recently logged Brazil nut concessions covering about 4000 ha of forest in Madre de Dios, Peru. Our field team accompanied Brazil nut harvesters during the traditional harvest period (January-April 2012 and January-April 2013) in order to collect data on fruit production. Three hundred and ninety-nine (approximately 80%) of the 499 trees included in this study were at least 100 m from the nearest cut stump, suggesting that concessionaires avoid logging near adult Brazil nut trees. Yet even for those trees on the edge of logging gaps, distance to nearest cut stump and local logging intensity did not have a statistically significant influence on Brazil nut production at the applied logging intensities (typically 1–2 timber trees removed per ha). In one concession where at least 4 trees ha-1 were removed, however, the logging intensity covariate resulted in a marginally significant (0.09) P value, highlighting a potential risk for a drop in nut production at higher intensities. While we do not suggest that logging activities should be completely avoided in Brazil nut rich

Nut Production in Bertholletia excelsa across a Logged Forest Mosaic: Implications for Multiple Forest Use.

Directory of Open Access Journals (Sweden)

Cara A Rockwell

Full Text Available Although many examples of multiple-use forest management may be found in tropical smallholder systems, few studies provide empirical support for the integration of selective timber harvesting with non-timber forest product (NTFP extraction. Brazil nut (Bertholletia excelsa, Lecythidaceae is one of the world's most economically-important NTFP species extracted almost entirely from natural forests across the Amazon Basin. An obligate out-crosser, Brazil nut flowers are pollinated by large-bodied bees, a process resulting in a hard round fruit that takes up to 14 months to mature. As many smallholders turn to the financial security provided by timber, Brazil nut fruits are increasingly being harvested in logged forests. We tested the influence of tree and stand-level covariates (distance to nearest cut stump and local logging intensity on total nut production at the individual tree level in five recently logged Brazil nut concessions covering about 4000 ha of forest in Madre de Dios, Peru. Our field team accompanied Brazil nut harvesters during the traditional harvest period (January-April 2012 and January-April 2013 in order to collect data on fruit production. Three hundred and ninety-nine (approximately 80% of the 499 trees included in this study were at least 100 m from the nearest cut stump, suggesting that concessionaires avoid logging near adult Brazil nut trees. Yet even for those trees on the edge of logging gaps, distance to nearest cut stump and local logging intensity did not have a statistically significant influence on Brazil nut production at the applied logging intensities (typically 1-2 timber trees removed per ha. In one concession where at least 4 trees ha-1 were removed, however, the logging intensity covariate resulted in a marginally significant (0.09 P value, highlighting a potential risk for a drop in nut production at higher intensities. While we do not suggest that logging activities should be completely avoided in Brazil

Variability in estimated runoff in a forested area based on different cartographic data sources

Energy Technology Data Exchange (ETDEWEB)

Fragoso, L.; Quirós, E.; Durán-Barroso, P.

2017-11-01

Aim of study: The goal of this study is to analyse variations in curve number (CN) values produced by different cartographic data sources in a forested watershed, and determine which of them best fit with measured runoff volumes. Area of study: A forested watershed located in western Spain. Material and methods: Four digital cartographic data sources were used to determine the runoff CN in the watershed. Main results: None of the cartographic sources provided all the information necessary to determine properly the CN values. Our proposed methodology, focused on the tree canopy cover, improves the achieved results. Research highlights: The estimation of the CN value in forested areas should be attained as a function of tree canopy cover and new calibrated tables should be implemented in a local scale.

Alaska's timber harvest and forest products industry, 2005

Science.gov (United States)

Jeff M. Halbrook; Todd A. Morgan; Jason P. Brandt; Charles E. Keegan; Thale Dillon; Tara M. Barrett

2009-01-01

This report traces the flow of timber harvested in Alaska during calendar year 2005, describes the composition and operations of the state's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, and sales of primary wood products....

Biological and Energy Productivity of Natural Spruce Forests in the Ukrainian Carpathians

Directory of Open Access Journals (Sweden)

R. D. Vasilishyn

2014-10-01

Full Text Available The modern practice of forestry production in Ukraine, which is in the process of implementing the conceptual changes in forest management and harmonization of its basic approaches to the basics of sustainable development, requires a significant expansion of the current regulatory and informational tools used to assess the ecological functions of forests. For this purpose, during the 2012–2014, as part of an international project GESAPU, models and tables of bioproductivity for forest tree species in Ukraine were completed. The article presents the results of modeling the dynamics of the conversion coefficients for the main components of phytomass of modal natural spruce forests of the Carpathian region of Ukraine based on information from 32 plots in the database of «Forest Phytomass of Ukraine». According to the state forest accounting of Ukraine as of January 1, 2011, the spruce forests in the Ukrainian Carpathians cover an area of 426.2 thousand ha, 45 % of which are spruce of natural origin. To evaluate the productivity of modal dynamics of pure and mixed spruce stands, the study developed models of the stock and overall productivity, derived by Bertalanffy growth function. On the basis of these models, normative reference tables of biological productivity of natural modal spruce forests of the Ukrainian Carpathians were developed. To successfully meet the challenges of evaluating the energy possibilities of forestry of Ukraine, the study used tables of energetic productivity of investigated stands. Built on the basis of the tables of bioproductivity, they reflect the dynamic processes of energy storage in the phytomass components and can be used in forest management to predict volumes of energetic woods.

Human dose pathways of radionuclides in forests; Forests ecosystems

Energy Technology Data Exchange (ETDEWEB)

Rantavaara, A. (Radiation and Nuclear Safety Authority, Research and Environmental Surveillance, Helsinki (Finland))

2009-06-15

Forest soil, understorey vegetation and trees are all sources of radionuclides and human radiation doses after contaminating atmospheric deposition. People are exposed to radiation externally from sources outside the body and internally via ingestion and inhalation of radionuclides. Understorey vegetation contributes to ingestion doses through berries, herbs, wild honey, mushrooms and game meat; also trees provide feed to terrestrial birds and big game. During stay in forests people are subject to external radiation from forest floor and overstorey, and they may inhale airborne radioactive aerosol or gaseous radionuclides in ground level air. In the early phase of contamination also resuspended radionuclides may add to the internal dose of people via inhalation. People in Nordic countries are most exposed to radiation via ingestion of radionuclides in wild foods. The distribution of radionuclides in forests is changed by environmental processes, and thereby also the significance of various dose pathways to humans will change with time. External exposure is received in living environment from contaminated stemwood used as building timber and for manufacturing of furniture and other wood products. The aim of this paper is to outline the significance of various human dose pathways of radionuclides in forests considering the public and workers in forestry and production of bioenergy. Examples on effective doses are given based on two historical events, atmospheric nuclear weapon tests (mostly in 1950's and in 1960's) and the Chernobyl nuclear power plant accident in 1986. (au)

Conceptual framework for Non-Timber Forest Products in mangroves of Colombia

International Nuclear Information System (INIS)

Garcia S, Catalina; Polania V, Jaime

2008-01-01

The forests policy of most of tropical countries is directed initially toward the use of Wood resources and, secondarily, for firewood. Nevertheless, tropical forests generate other products that, in some countries, can have a high value, comparable with those of wood, called 'Non Timber Forest Products' (NTFP) or 'Non Wood Forest Products' (NWFP). Unfortunately this label does not enhance the fact that its harvest is an important activity in rural economies. The NTFP have motivated interest by their economic and social contribution in many countries, mainly for rural populations? all along Latin America are utilized, and, particularly in Colombia, it is necessary to regulate clearly and accurately their exploitation. Here we present a conceptual framework for the NTFP's, and describe the potential contribution of mangroves to this market in Colombia

A Bayesian Belief Network approach to assess the potential of non wood forest products for small scale forest owners

Science.gov (United States)

Vacik, Harald; Huber, Patrick; Hujala, Teppo; Kurtilla, Mikko; Wolfslehner, Bernhard

2015-04-01

It is an integral element of the European understanding of sustainable forest management to foster the design and marketing of forest products, non-wood forest products (NWFPs) and services that go beyond the production of timber. Despite the relevance of NWFPs in Europe, forest management and planning methods have been traditionally tailored towards wood and wood products, because most forest management models and silviculture techniques were developed to ensure a sustained production of timber. Although several approaches exist which explicitly consider NWFPs as management objectives in forest planning, specific models are needed for the assessment of their production potential in different environmental contexts and for different management regimes. Empirical data supporting a comprehensive assessment of the potential of NWFPs are rare, thus making development of statistical models particularly problematic. However, the complex causal relationships between the sustained production of NWFPs, the available ecological resources, as well as the organizational and the market potential of forest management regimes are well suited for knowledge-based expert models. Bayesian belief networks (BBNs) are a kind of probabilistic graphical model that have become very popular to practitioners and scientists mainly due to the powerful probability theory involved, which makes BBNs suitable to deal with a wide range of environmental problems. In this contribution we present the development of a Bayesian belief network to assess the potential of NWFPs for small scale forest owners. A three stage iterative process with stakeholder and expert participation was used to develop the Bayesian Network within the frame of the StarTree Project. The group of participants varied in the stages of the modelling process. A core team, consisting of one technical expert and two domain experts was responsible for the entire modelling process as well as for the first prototype of the network

Overview of approaches to sustain forest productivity during forest road development and timber harvesting activities

Science.gov (United States)

Charles R. Blinn; Rick Dahlamn; James A. Mattson; Michael A. Thompson

1999-01-01

Various approaches are available to minimize impacts on forest productivity during forest road building and timber harvesting activities. These approaches include a variety of practices and technologies. They include practices such as reducing road and trail development, using designated trails, and leaving slash at the stump on nutrient deficient sites. Technology...

Rain forest nutrient cycling and productivity in response to large-scale litter manipulation.

Science.gov (United States)

Wood, Tana E; Lawrence, Deborah; Clark, Deborah A; Chazdon, Robin L

2009-01-01

Litter-induced pulses of nutrient availability could play an important role in the productivity and nutrient cycling of forested ecosystems, especially tropical forests. Tropical forests experience such pulses as a result of wet-dry seasonality and during major climatic events, such as strong El Niños. We hypothesized that (1) an increase in the quantity and quality of litter inputs would stimulate leaf litter production, woody growth, and leaf litter nutrient cycling, and (2) the timing and magnitude of this response would be influenced by soil fertility and forest age. To test these hypotheses in a Costa Rican wet tropical forest, we established a large-scale litter manipulation experiment in two secondary forest sites and four old-growth forest sites of differing soil fertility. In replicated plots at each site, leaves and twigs (forest floor. We analyzed leaf litter mass, [N] and [P], and N and P inputs for addition, removal, and control plots over a two-year period. We also evaluated basal area increment of trees in removal and addition plots. There was no response of forest productivity or nutrient cycling to litter removal; however, litter addition significantly increased leaf litter production and N and P inputs 4-5 months following litter application. Litter production increased as much as 92%, and P and N inputs as much as 85% and 156%, respectively. In contrast, litter manipulation had no significant effect on woody growth. The increase in leaf litter production and N and P inputs were significantly positively related to the total P that was applied in litter form. Neither litter treatment nor forest type influenced the temporal pattern of any of the variables measured. Thus, environmental factors such as rainfall drive temporal variability in litter and nutrient inputs, while nutrient release from decomposing litter influences the magnitude. Seasonal or annual variation in leaf litter mass, such as occurs in strong El Niño events, could positively

Important Non-Wood Forest Products in Turkey: An Econometric Analysis

Directory of Open Access Journals (Sweden)

R. Kurt

2016-12-01

Full Text Available Wood resources obtained from forest and non-wood forest products (NWFP have gained great importance recently as their economic values keeps increasing by the day. In this study, forecasting of Turkish Non-Wood Forest Products such as thyme, bay leaves, salvia and pine nut export amounts was carried out using a linear regression analysis method for the next fifteen years based on the data for the years between 1990 and 2009. Moreover, estimated import values and actual import values from the last years were compered and analyzed. Finally, predictions on future trends were made.

The distribution of nitrogen and phosphorus in forest floor layers of oak-hickory forests of varying productivity

Science.gov (United States)

Karyn S. Rodkey; Donald J. Kaczmarek; Phillip E. Pope

1995-01-01

The forest floor plays a major role in the storage and recycling of nutrients which, in turn, are important in maintaining the growth and productivity of forest ecosystems. The development of forest floor organic layers as influenced by litter quality and site quality is unclear. Previous studies in this lab have shown that the size and distribution of available...

Using GPS to evaluate productivity and performance of forest machine systems

Science.gov (United States)

Steven E. Taylor; Timothy P. McDonald; Matthew W. Veal; Ton E. Grift

2001-01-01

This paper reviews recent research and operational applications of using GPS as a tool to help monitor the locations, travel patterns, performance, and productivity of forest machines. The accuracy of dynamic GPS data collected on forest machines under different levels of forest canopy is reviewed first. Then, the paper focuses on the use of GPS for monitoring forest...

Is sustainable development attainable? Challenges facing forestry and the forest products industry

International Nuclear Information System (INIS)

Wrist, P.E.

1991-01-01

The challenges that face the forest industry in achieving sustainable development are reviewed. Sustainable development is not the same as sustained yield forest management. While sustained yield limits harvesting to an estimate of a forest's incremental annual growth, it is a policy which neither takes into account how improved forest management practices can increase future growth rates nor gives guidance on how multiple uses for the forest resource can be made compatible with periodic harvesting of that resource. Forests, in addition to meeting demands for timber production, must also meet demands for watershed management, recreation, preservation of wildlife and genetic diversity, moderation of climates, carbon sequestration, and land reclamation. Information is lacking from which to develop improved forest management programs that take these demands into account. Questions remain about such matters as the role of plantations in sustainable forestry and the maintenance of natural diversity. Some recent research being undertaken to generate better information for future forestry decision making is outlined, including work on gene pool maintenance, the interdependence of forest ecology and climate, the symbiotic role of mycorrhiza, forest fertilization, and the interdependence of sustainable forestry and sustainable fisheries. In the forest products industry, engineered wood products have been developed that meet tight specifications and require less raw material, and process changes have been introduced that greatly reduce pollutants from pulp manufacture

An outlook for sustainable forest bioenergy production in the Lake States

International Nuclear Information System (INIS)

Becker, Dennis R.; Skog, Kenneth; Hellman, Allison; Halvorsen, Kathleen E.; Mace, Terry

2009-01-01

The Lake States region of Minnesota, Wisconsin and Michigan offers significant potential for bioenergy production. We examine the sustainability of regional forest biomass use in the context of existing thermal heating, electricity, and biofuels production, projected resource needs over the next decade including existing forest product market demand, and impacts on price and feasibility. Assuming $36 per dry tonne at roadside, 4.1 million dry tonnes of forest biomass could be available region-wide. However, less is likely available due to localized environmental and forest cover type constraints, and landowner willingness to harvest timber. Total projected demand of 5.7 million dry tonnes, based on current and announced industry capacity, exceeds estimates of biomass availability, which suggests that anticipated growth in the forest-based bioeconomy may be constrained. Attaining projected demand will likely require a combination of higher cost feedstocks, integration of energy and non-energy uses, and careful management to meet environmental constraints. State distinctions in biomass harvest guidelines and the propensity for third-party forest certification will be critical in providing environmental safeguards. The cumulative effect of policy initiatives on biomass competition are discussed in the context of an emerging Lake States bioeconomy.

Consumption of forest chips as an energy source as part of the national action plan for renewable energy

International Nuclear Information System (INIS)

Ylitalo, E.

2004-01-01

A specific Action Plan for Renewable Energy was introduced in 1999 in order to increase the utilisation of renewable energy sources in Finland. The Plan was renewed in 2002, taking into account a revision of the goals defined in the statements given by the Parliament in the de-bate on national Climate Strategy and the decision on building a new nuclear power plant. The main reason for increasing the consumption of renewable energy is the aim of decreasing emissions of greenhouse gases caused by fossil fuels. The renewed Action Plan includes aims and means of how to increase the consumption of renewable energy in practice in the future. Specific goals for separate renewable energy sources were set for the years 2005, 2010 and 2025. Proportional targets were set for the consumption of forest chips: in 2010 consumption is expected to be four times larger than in 2001 and in 2025 seven times larger. In Finland, the most important source for renewable energy is wood and wood waste, which currently makes up approximately 20 per cent of total energy consumption. Wood waste (incl. waste liquor and solid wood waste) produced by the forest industries can be considered as being fully utilized at the moment. Therefore, the most important means of increasing the consumption of wood energy in the future is in the utilisation of forest chips resources. Since 2000, the Finnish Forest Re-search Institute has compiled statistics on the consumption of forest chips and forest industry by-products used in energy generation. One aim of these statistics is to monitor the fruition of the Action Plan mentioned. In 2003, the volume of forest chips consumed in energy generation was 2.1 mill. m3, i.e. approximately five per cent of all energy sources consumed. According to the statistics, the consumption of forest chips has doubled during the period 2000-2003 with an annual average increase of 0.4 mill. m 3 . The goals set in the Action Plan can be considered to be high. In order to achieve

Rapid Increases in forest understory diversity and productivity following a mountain pine beetle (Dendroctonus ponderosae) outbreak in pine forests.

Science.gov (United States)

Pec, Gregory J; Karst, Justine; Sywenky, Alexandra N; Cigan, Paul W; Erbilgin, Nadir; Simard, Suzanne W; Cahill, James F

2015-01-01

The current unprecedented outbreak of mountain pine beetle (Dendroctonus ponderosae) in lodgepole pine (Pinus contorta) forests of western Canada has resulted in a landscape consisting of a mosaic of forest stands at different stages of mortality. Within forest stands, understory communities are the reservoir of the majority of plant species diversity and influence the composition of future forests in response to disturbance. Although changes to stand composition following beetle outbreaks are well documented, information on immediate responses of forest understory plant communities is limited. The objective of this study was to examine the effects of D. ponderosae-induced tree mortality on initial changes in diversity and productivity of understory plant communities. We established a total of 110 1-m2 plots across eleven mature lodgepole pine forests to measure changes in understory diversity and productivity as a function of tree mortality and below ground resource availability across multiple years. Overall, understory community diversity and productivity increased across the gradient of increased tree mortality. Richness of herbaceous perennials increased with tree mortality as well as soil moisture and nutrient levels. In contrast, the diversity of woody perennials did not change across the gradient of tree mortality. Understory vegetation, namely herbaceous perennials, showed an immediate response to improved growing conditions caused by increases in tree mortality. How this increased pulse in understory richness and productivity affects future forest trajectories in a novel system is unknown.

Rapid Increases in forest understory diversity and productivity following a mountain pine beetle (Dendroctonus ponderosae outbreak in pine forests.

Directory of Open Access Journals (Sweden)

Gregory J Pec

Full Text Available The current unprecedented outbreak of mountain pine beetle (Dendroctonus ponderosae in lodgepole pine (Pinus contorta forests of western Canada has resulted in a landscape consisting of a mosaic of forest stands at different stages of mortality. Within forest stands, understory communities are the reservoir of the majority of plant species diversity and influence the composition of future forests in response to disturbance. Although changes to stand composition following beetle outbreaks are well documented, information on immediate responses of forest understory plant communities is limited. The objective of this study was to examine the effects of D. ponderosae-induced tree mortality on initial changes in diversity and productivity of understory plant communities. We established a total of 110 1-m2 plots across eleven mature lodgepole pine forests to measure changes in understory diversity and productivity as a function of tree mortality and below ground resource availability across multiple years. Overall, understory community diversity and productivity increased across the gradient of increased tree mortality. Richness of herbaceous perennials increased with tree mortality as well as soil moisture and nutrient levels. In contrast, the diversity of woody perennials did not change across the gradient of tree mortality. Understory vegetation, namely herbaceous perennials, showed an immediate response to improved growing conditions caused by increases in tree mortality. How this increased pulse in understory richness and productivity affects future forest trajectories in a novel system is unknown.

Total peroxy nitrates and ozone production : analysis of forest fire plumes during BORTAS campaign

Science.gov (United States)

Busilacchio, Marcella; Di Carlo, Piero; Aruffo, Eleonora; Biancofiore, Fabio; Giammaria, Franco; Bauguitte, Stephane; Lee, James; Moller, Sarah; Lewis, Ally; Parrington, Mark; Palmer, Paul; Dari Salisburgo, Cesare

2014-05-01

The goal of this work is to investigate the connection between PNS and ozone within plumes emitted from boreal forest fires and the possible perturbation to oxidant chemistry in the troposphere. During the Aircraft campaign in Canada called BORTAS (summer 2011 ) were carried out several profiles from ground up to 10 km with the BAe-146 aircraft to observe the atmospheric composition inside and outside fire plumes. The BORTAS flights have been selected based on the preliminary studies of 'Plume identification', selecting those effected by Boreal forest fire emissions (CO > 200 ppbv). The FLAMBE fire counts were used concertedly with back trajectory calculations generated by the HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model to locate the sources of Boreal biomass burning.Profiles measured on board the BAe-146 aircraft are used to calculate the productions of PNs and O3 within the biomass burning plume. By selecting the flights that intercept the biomass burning plume, we evaluate the ratio between the ozone production and the PNs production within the plume. Analyzing this ratio it is possible to determine whether O3 production or PNs production is the dominant process in the biomass burning boreal plume detected during BORTAS campaign.

Romanian legal management rules limit wood production in Norway spruce and beech forests

Directory of Open Access Journals (Sweden)

Olivier Bouriaud

2016-09-01

Full Text Available Background The quantitative impact of forest management on forests’ wood resource was evaluated for Picea and Fagus mixed forests. The effects on the productivity of tendering operations, thinnings and rotation length have seldom been directly quantified on landscape scale. Methods Two sites of similar fertility but subject to contrasted forest management were studied with detailed inventories: one in Germany, the other in Romania, and compared with the respective national forest inventories. In Romania, regulations impose very long rotations, low thinnings and a period of no-cut before harvest. In contrast, tending and thinnings are frequent and intense in Germany. Harvests start much earlier and must avoid clear cutting but maintain a permanent forest cover with natural regeneration. While Germany has an average annual wood increment representative for Central Europe, Romania represents the average for Eastern Europe. Results The lack of tending and thinning in the Romanian site resulted in twice as many trees per hectare as in the German site for the same age. The productivity in Romanian production forests was 20 % lower than in Germany despite a similar fertility. The results were supported by the data from the national forest inventory of each country, which confirmed that the same differential exists at country scale. Furthermore, provided the difference in rotation length, two crops are harvested in Germany when only one is harvested in Romania. The losses of production due to a lower level of management in Romania where estimated to reach 12.8 million m3.y-1 in regular mountain production forests, and to 15 million m3.y-1 if managed protection forest is included. Conclusions The productivity of Picea and Fagus mountain forests in Romania is severely depressed by the lack of tending and thinning, by overly long rotations and the existence of a 25-years no-cut period prior to harvest. The average standing volume in Germany was 50

Montana's forest products industry and timber harvest, 2004

Science.gov (United States)

Timothy P. Spoelma; Todd A. Morgan; Thale Dillon; Alfred L. Chase; Charles E. Keegan; Larry T. DeBlander

2008-01-01

This report traces the flow of Montana's 2004 timber harvest through the primary wood-using industries; provides a description of the structure, capacity, and condition of Montana's primary forest products industry; and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as changes in harvest, production...

Using 137Cs and 210Pbex and other sediment source fingerprints to document suspended sediment sources in small forested catchments in south-central Chile

International Nuclear Information System (INIS)

Schuller, P.; Walling, D.E.; Iroumé, A.; Quilodrán, C.; Castillo, A.; Navas, A.

2013-01-01

A study of the impact of forest harvesting operations on sediment mobilization from forested catchments has been undertaken in south-central Chile. The study focused on two sets of small paired catchments (treatment and control), with similar soil type, but contrasting mean annual rainfall, located about 400 km apart at Nacimiento (1200 mm yr −1 ) and Los Ulmos (2500 mm yr −1 ). The objective was to study the changes in the relative contribution of the primary sources of fine sediment caused by forestry operations. Attention focused on the pre-harvest and post-harvest periods and the post-replanting period was included for the Nacimiento treatment catchment. The sediment source fingerprinting technique was used to document the contributions of the potential sources. Emphasis was placed on discriminating between the forest slopes, forest roads and channel erosion as potential sources of fine sediment and on assessing the relative contributions of these three sources to the sediment yield from the catchments. The fallout radionuclides (FRNs) 137 Cs and excess lead-210, the environmental radionuclides 226 Ra and 40 K and soil organic matter (SOM) were tested as possible fingerprints for discriminating between potential sediment sources. The Kruskal–Wallis test and discriminant function analysis were used to guide the selection of the optimum fingerprint set for each catchment and observation period. Either one or both of the FRNs were selected for inclusion in the optimum fingerprint for all datasets. The relative contribution of each sediment source to the target sediment load was estimated using the selected fingerprint properties, and a mixing model coupled with a Monte Carlo simulation technique that takes account of uncertainty in characterizing sediment source properties. The goodness of fit of the mixing model was tested by comparing the measured and simulated fingerprint properties for the target sediment samples. In the Nacimiento treatment catchment

Biorefinery opportunities for the forest products industries

Science.gov (United States)

Alan W. Rudie

2013-01-01

Wood residues offer biorefinery opportunities for new products in our industries including fuel and chemicals. But industry must have two capabilities to succeed with biorefineries. Most forest products companies already have the first capability: knowing where the resource is, how to get it, and how much it will cost. They will need to integrate the acquisition of...

Impact of biomass harvesting on forest soil productivity in the northern Rocky Mountains

Science.gov (United States)

Woongsoon Jang; Christopher R. Keyes; Deborah Page-Dumroese

2015-01-01

Biomass harvesting extracts an increased amount of organic matter from forest ecosystems over conventional harvesting. Since organic matter plays a critical role in forest productivity, concerns of potential negative long-term impacts of biomass harvesting on forest productivity (i.e., changing nutrient/water cycling, aggravating soil properties, and compaction) have...

Biomass Burning:Significant Source of Nitrate and Sulfate for the Andean Rain Forest in Ecuador

Science.gov (United States)

Fabian, P.; Rollenbeck, R.; Spichtinger, N.

2009-04-01

Forest fires are significant sources of carbon, sulfur and nitrogen compounds which, along with their photochemically generated reaction products, can be transported over very long distances, even traversing oceans. Chemical analyses of rain and fogwater samples collected on the wet eastern slopes of the Ecuadorian Andes show frequent episodes of high sulfate and nitrate concentration, from which annual deposition rates of about14 kg/ha and 7 kg/ha ,respectively, are derived. These are comparable to those observed in polluted central Europe. Regular rain and fogwater sampling along an altitude profile between 1800 and 3185 m, has been carried out since 2002.The research area located at 30 58'S ,790 5' W is dominated by trade winds from easterly directions. The samples, generally accumulated over 1-week intervals, were analysed for pH, conductivity and major ions(K+,Na+,NH4+,Ca2+,Mg 2+,SO42-,NO3-,PO43-).For all components a strong seasonal variation is observed, while the altitudinal gradient is less pronounced. About 65 % of the weekly samples were significantly loaded with cations and anions, with pH often as low 3.5 to 4.0 and conductivity up to 50 uS/cm. Back trajectories (FLEXTRA) showed that respective air masses had passed over areas of intense biomass burning, sometimes influenced by volcanoes, ocean spray, or even episodic Sahara and/or Namib desert dust interference not discussed here. Enhanced SO4 2-and NO3- were identified, by combining satellite-based fire pixels with back trajectories, as predominantly resulting from biomass burning. For most cases, by using emission inventories, anthropogenic precursor sources other than forest fires play a minor role, thus leaving biomass burning as the main source of nitrate and sulphate in rain and fogwater. Some SO4 2- , about 10 % of the total input, could be identified to originate from active volcanoes, whose plumes were sometimes encountered by the respective back trajectories. While volcanic, oceanic and

Biogeochemical modelling vs. tree-ring data - comparison of forest ecosystem productivity estimates

Science.gov (United States)

Zorana Ostrogović Sever, Maša; Barcza, Zoltán; Hidy, Dóra; Paladinić, Elvis; Kern, Anikó; Marjanović, Hrvoje

2017-04-01

Forest ecosystems are sensitive to environmental changes as well as human-induce disturbances, therefore process-based models with integrated management modules represent valuable tool for estimating and forecasting forest ecosystem productivity under changing conditions. Biogeochemical model Biome-BGC simulates carbon, nitrogen and water fluxes, and it is widely used for different terrestrial ecosystems. It was modified and parameterised by many researchers in the past to meet the specific local conditions. In this research, we used recently published improved version of the model Biome-BGCMuSo (BBGCMuSo), with multilayer soil module and integrated management module. The aim of our research is to validate modelling results of forest ecosystem productivity (NPP) from BBGCMuSo model with observed productivity estimated from an extensive dataset of tree-rings. The research was conducted in two distinct forest complexes of managed Pedunculate oak in SE Europe (Croatia), namely Pokupsko basin and Spačva basin. First, we parameterized BBGCMuSo model at a local level using eddy-covariance (EC) data from Jastrebarsko EC site. Parameterized model was used for the assessment of productivity on a larger scale. Results of NPP assessment with BBGCMuSo are compared with NPP estimated from tree ring data taken from trees on over 100 plots in both forest complexes. Keywords: Biome-BGCMuSo, forest productivity, model parameterization, NPP, Pedunculate oak

Monitoring Regional Forest Disturbances across the US with near Real Time MODIS NDVI Products Resident to the ForWarn Forest Threat Early Warning System

Science.gov (United States)

Spruce, Joseph P.; Hargrove, William W.; Gasser, Gerald

2013-01-01

Forest threats across the US have become increasingly evident in recent years. Sometimes these have resulted in regionally evident disturbance progressions (e.g., from drought, bark beetle outbreaks, and wildfires) that can occur across multiyear durations and have resulted in extensive forest overstory mortality. In addition to stand replacement disturbances, other forests are subject to ephemeral, sometimes yearly defoliation from various insects and varying types and intensities of ephemeral damage from storms. Sometimes, after prolonged severe disturbance, signs of recovery in terms of Normalized Difference Vegetation Index (NDVI) can occur. The growing prominence and threat of forest disturbances in part have led to the formation and implementation of the 2003 Healthy Forest Restoration Act which mandated that national forest threat early warning system be developed and deployed. In response, the US Forest Service collaborated with NASA, DOE Oakridge National Laboratory, and the USGS Eros Data Center to build and roll-out the near real time ForWarn early warning system for monitoring regionally evident forest disturbances. Given the diversity of disturbance types, severities, and durations, ForWarn employs multiple historical baselines that are used with current NDVI to derive a suite of six forest change products that are refreshed every 8 days. ForWarn employs daily quarter kilometer MODIS NDVI data from the Aqua and Terra satellites, including MOD13 data for deriving historical baseline NDVIs and eMODIS 7 NDVI for compiling current NDVI. In doing so, the Time Series Product Tool and the Phenological Parameters Estimation Tool are used to temporally de-noise, fuse, and aggregate current and historical MODIS NDVIs into 24 day composites refreshed every 8 days with 46 dates of products per year. The 24 day compositing interval enables disturbances to be detected, while minimizing the frequency of residual atmospheric contamination. Forest change products are

Who, what, and why: the products, their use, and issues about management of non-timber forest products in the United States

Science.gov (United States)

Susan J. Alexander

2001-01-01

Non-timber forest products in the United States include floral greens, Christmas ornamentals, wild edibles, medicinals, crafts, and transplants. Non-timber forest products are important to many people for many reasons. People harvest products from forests for personal use, cultural practices, and sale. The tremendous variety of species harvested for the many markets...

Alabama's forest products industry: performance and contribution to the State's economy, 1970 to 1980.

Science.gov (United States)

Wilbur R. Maki; Con H Schallau; Bennett B. Foster; Clair H. Redmond

1986-01-01

Employment and earnings in Alabama's forest products industry, like those of most Southern States, grew significantly between 1970 and 1980. The forest products industry accounted for a larger share of the State's economic base. in 1980 than in 1970. Of the 13 Southern States, only 5 had more forest products industry employment than Alabama. Moreover, during...

A GIS-derived integrated moisture index to predict forest composition and productivity of Ohio forests (U.S.A.)

Science.gov (United States)

Louis R. Iverson; Martin E. Dale; Charles T. Scott; Anantha Prasad; Anantha Prasad

1997-01-01

A geographic information system (GIS) approach was used in conjunction with forest-plot data to develop an integrated moisture index (IMI), which was then used to predict forest productivity (site index) and species composition for forests in Ohio. In this region, typical of eastern hardwoods across the Midwest and southern Appalachians, topographic aspect and position...

Who benefits from taxation of forest products in Nepal’s community forests?

DEFF Research Database (Denmark)

Lund, Jens Friis; Baral, Keshab; Bhandari, Nirmala Singh

2014-01-01

-poor initiatives and to explore whether biases against certain groups in investments coincide with biases in their participation in decision-making. The paper is based upon data on taxation income and revenue expenditures of 45 community-forest user groups (CFUG) and on data from 1111 CFUG member households...... with the level of transparency about CFUG finances and decision-making processes. Further, poor and Dalit households are generally less knowledgeable on and participate less in CFUG management than other groups, and are less well represented on the CFUG executive committees. Thus, overall, the distribution......This paper is concerned with who benefits from taxation of forest products in Nepal's community forests. The objectives of the study are two-fold; to document who benefits from community forestry user groups' (CFUG) financing of investments in public services and infrastructure and pro...

Future carbon storage in harvested wood products from Ontario's Crown forests

Science.gov (United States)

Jiaxin Chen; Stephen J. Colombo; Michael T. Ter-Mikaelian; Linda S. Heath

2008-01-01

This analysis quantifies projected carbon (C) storage in harvested wood products (HWP) from Ontario's Crown forests. The large-scale forest C budget model, FORCARB-ON, was applied to estimate HWP C stock changes using the production approach defined by the Intergovernmental Panel on Climate Change. Harvested wood volume was converted to C mass and allocated to...

Final Progress Report on Model-Based Diagnosis of Soil Limitations to Forest Productivity

Energy Technology Data Exchange (ETDEWEB)

Luxmoore, R.J.

2004-08-30

This project was undertaken in support of the forest industry to link modeling of nutrients and productivity with field research to identify methods for enhancing soil quality and forest productivity and for alleviating soil limitations to sustainable forest productivity. The project consisted of a series of related tasks, including (1) simulation of changes in biomass and soil carbon with nitrogen fertilization, (2) development of spreadsheet modeling tools for soil nutrient availability and tree nutrient requirements, (3) additional modeling studies, and (4) evaluation of factors involved in the establishment and productivity of southern pine plantations in seasonally wet soils. This report also describes the two Web sites that were developed from the research to assist forest managers with nutrient management of Douglas-fir and loblolly pine plantations.

The forest products industry at an energy/climate crossroads

International Nuclear Information System (INIS)

Brown, Marilyn A.; Baek, Youngsun

2010-01-01

Transformational energy and climate policies are being debated worldwide that could have significant impact upon the future of the forest products industry. Because woody biomass can produce alternative transportation fuels, low-carbon electricity, and numerous other 'green' products in addition to traditional paper and lumber commodities, the future use of forest resources is highly uncertain. Using the National Energy Modeling System (NEMS), this paper assesses the future of the forest products industry under three possible U.S. policy scenarios: (1) a national renewable electricity standard, (2) a national policy of carbon constraints, and (3) incentives for industrial energy efficiency. In addition, we discuss how these policy scenarios might interface with the recently strengthened U.S. renewable fuels standards. The principal focus is on how forest products including residues might be utilized under different policy scenarios, and what such market shifts might mean for electricity and biomass prices, as well as energy consumption and carbon emissions. The results underscore the value of incentivizing energy efficiency in a portfolio of energy and climate policies in order to moderate electricity and biomass price escalation while strengthening energy security and reducing CO 2 emissions. - Research highlights: →Transformational energy and climate policies such as a national renewable electricity standard, a national policy of carbon constraints, and incentives for industrial energy efficiency could have significant impact upon the future of the forest products industry. →Each policy scenario reduces CO 2 emissions over time, compared to the business-as-usual forecast, with the carbon constrained policy producing the largest decline. As a package, the three policies together could cut CO 2 emissions from the electricity sector by an estimated 41% by 2030. →This study underscores the value of incentivizing energy efficiency in a portfolio of energy and

Monitoring Regional Forest Disturbances across the US with Near Real Time MODIS NDVI Products included in the ForWarn Forest Threat Early Warning System

Science.gov (United States)

Spruce, Joseph; Hargrove, William W.; Gasser, Gerald; Norman, Steve

2013-01-01

U.S. forests occupy approx.1/3 of total land area (approx. 304 million ha). Since 2000, a growing number of regionally evident forest disturbances have occurred due to abiotic and biotic agents. Regional forest disturbances can threaten human life and property, bio-diversity and water supplies. Timely regional forest disturbance monitoring products are needed to aid forest health management work. Near Real Time (NRT) twice daily MODIS NDVI data provide a means to monitor U.S. regional forest disturbances every 8 days. Since 2010, these NRT forest change products have been produced and posted on the US Forest Service ForWarn Early Warning System for Forest Threats.

Fission-product source terms

International Nuclear Information System (INIS)

Lorenz, R.A.

1981-01-01

This presentation consists of a review of fission-product source terms for light water reactor (LWR) fuel. A source term is the quantity of fission products released under specified conditions that can be used to calculate the consequences of the release. The source term usually defines release from breached fuel-rod cladding but could also describe release from the primary coolant system, the reactor containment shell, or the site boundary. The source term would be different for each locality, and the chemical and physical forms of the fission products could also differ

From deficit to surplus: An econometric analysis of US trade balance in forest products

Science.gov (United States)

Daowei Zhang; Ying Lin; Jeffrey P. Prestemon

2017-01-01

Although the US trade deficit has persisted since 1975, the country changed in 2009 from a net importer to a net exporter of forest products, emerging as the world's largest exporter of forest products. Drawing on recent data, we model the real dollar value of US exports, imports, and the trade balance in forest products to identify factors likely to explain this...

Personal Selling for the Forest Products Industry

OpenAIRE

Smith, Robert L. (Robert Lee), 1955 August 21-; Hansen, Eric, 1968-; Olah, David F.

2009-01-01

The role of salespeople in today's forest products industry is evolving from order taking and price quoting to promoting mutually profitable value exchanges. This publication details the salesperson's responsibilities, describes successful sales strategies, and lists additional available resources.

Understory biomass from southern pine forests as a fuel source

Energy Technology Data Exchange (ETDEWEB)

Ku, T.T. [Univ. of Arkansas, Monticello, AR (United States); Baker, J.B. [USDA Forest Service, Monticello, AR (United States)

1993-12-31

The energy crisis in the US in the late 1970s led to accelerated research on renewable energy resources. The use of woody biomass, harvested from pine forests in the southern US, as a renewable energy source would not only provide an efficient energy alternative to forest industries, but its use would also reduce understory competition and accelerate growth of overstory crop trees. This study was initiated in the early 1980s to investigate the feasibility and applicability of the use of understory vegetation as a possible energy fuel resource. All woody understory vegetation [<14 cm (<5.5 in) in dbh], on 0.2 ha (0.5 ac) plots that represented a range of stand/site conditions of pine stands located in twelve southern Arkansas counties and two northern Louisiana parishes were characterized, quantified, and harvested. Based on the biomass yield from 720 subplots nested within 40 main plots, the top five dominant species in the understory, based on number and size were: Red maple, red oaks, pines, sweetgum, and winged elm. Some other species occurring, but in smaller proportions, were flowering dogwood, beautyberry, white oaks, black gum, wax myrtle, hickories, persimmon, and ashes. Most of these species are deciduous hardwoods that provide high BTU output upon burning. The average yield of chipped understory biomass was 23.5 T/ha with no difference occurring between summer and winter harvests. A predictive model of understory biomass production was developed using a step-wise multivariate regression analysis. In relation to forest type, high density pine stands produced 53% more understory biomass than high density pine-hardwood stands. The average moisture content of biomass was significantly lower when harvested in winter than when harvested in summer.

Nanotechnology for forest products. Part 2

Science.gov (United States)

Theodore Wegner; Phil Jones

2005-01-01

In planning for the Nanotechnology for the Forest products Industry Workshop, we considered many different options for organizing technical focus areas for breakout discussion sessions. We felt the fallowing R&D focus areas provide the best path forward for a nanotechnology roadmap by identifying the underlying science and technology needed: also, they foster...

Machinery and labour force requirements for forest chip production in Finland in 2020

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K.; Strandsroem, M. (Metsaeteho Oy, Helsinki (Finland)), Email: kalle.karha@metsateho.fi, Email: markus.strandstrom@metsateho.fi; Lahtinen, P.; Elo, J. (Poeyry Energy Oy, Espoo (Finland)), Email: perttu.lahtinen@poyry.com, Email: juha.elo@poyry.com

2009-07-01

The research carried out by Metsaeteho Oy and Poeyry Energy Oy estimated how much machinery and labour would be needed for large-scale forest chip production if the use of forest chips increases extensively in Finland during the coming decade. If the production and consumption of forest chips are 25 to 30 TWh in Finland 2020, then 1,900 to 2,200 machinery units, i.e. machines and trucks, would be needed. This would mean total investments in production machinery of 530 to 630 million euro (VAT 0 %). The labour demand would be 3,400 to 4,000 machine operators and drivers, and 4,200 to 5,100 labour years including indirect labour. Respectively, if the production and consumption of forest chips is 15 to 20 TWh in Finland in 2020, then the production machinery requirement would be 1,100 to 1,500 machines and trucks. The total machinery investment cost would be 320 to 420 million euro (VAT 0 %) and the calculated labour demand 2,000 to 2,700 machine operators and drivers (2,500 to 3,400 labour years). The results of the study indicated that forest chip production resources will be a major bottleneck in reaching the consumption target of 12 million m3, i.e. around 24 TWh of forest chips in Finland by 2020. (orig.)

Interactions between atmospheric circulation, nutrient deposition, and tropical forest primary production (Invited)

Science.gov (United States)

Randerson, J. T.; Chen, Y.; Rogers, B. M.; Morton, D. C.; van der Werf, G.; Mahowald, N. M.

2010-12-01

Tropical forests influence regional and global climate by means of several pathways, including by modifying surface energy exchange and by forming clouds. High levels of precipitation, leaching, and soil weathering limit nutrient availability in these ecosystems. Phosphorus (P) is a key element limiting net primary production, and in some areas, including forests recovering from prior disturbance, nitrogen (N) also may limit some components of production. Here we quantified atmospheric P and N inputs to these forests from fires using satellite-derived estimates of emissions and atmospheric models. In Africa and South America, cross-biome transport of fire-emitted aerosols and reactive N gases from savannas and areas near the deforestation frontier increased deposition of P and N in interior forests. Equatorward atmospheric transport during the dry (fire) season in one hemisphere was linked with surface winds moving toward the inter-tropical convergence zone (ITCZ) in the other hemisphere. Deposition levels were higher in tropical forests in Africa than in South America because of large savanna areas with high levels of fire emissions in both southern and northern Africa. We conclude by describing a potential feedback loop by which equatorward transport of fire emissions, dust, and spores sustains the productivity of tropical forests. We specifically assessed evidence that savanna-to-forest atmospheric transport of nutrients increases forest productivity, height, and rates of evapotranspiration (ET). In parallel, we examined the degree to which increases in ET and surface roughness in tropical forests have the potential to strengthen several components of the Hadley circulation, including deep convection, equatorward return flow (near the surface), and the intensity of seasonal drought in the subtropics (thereby increasing fires). These interactions are important for understanding biogeochemical - climate interactions on millennial timescales and for quantifying how

Acidic deposition and its effects on forest productivity: a review of the present state of knowledge, research activities, and information needs

Energy Technology Data Exchange (ETDEWEB)

Pinkerton, J.E.

1981-01-01

The present state of knowledge with regard to acid deposition is reviewed. Sources include the literature and direct contact with persons responsible for carrying out all completed, ongoing, and planned research activities, national and international, related to acidic deposition and its effects, with emphasis on forest productivity. In addition, a list of information needs in seven areas was developed, these include: a characterization of forest soils to define their sensitivity to acidic deposition; effects on forest soil chemical and biological processes; development of improved dry deposition measurement methods; changes in precipitation composition due to forest canopies; more extensive monitoring of acidic deposition in industry owned forest lands; expansion of long-term greenhouse and controlled field experiments; and the relationship of acidic deposition and intensive forestry management practices. 85 references. (MDF)

An assessment of educational needs in the Alaskan forest products industry.

Science.gov (United States)

Jon Thomas; Eric Hansen; Allen M. Brackley

2005-01-01

Major changes in federal forest policy in Alaska have resulted in a dramatic downsizing of the state's forest industry. These changes have driven efforts for economic restructuring and improved support for Alaskan communities. The University of Alaska Sitka Forest Products program at the University of Alaska Southeast is one example of efforts to better support...

Diversity in the socio-economic role of the main non-wood forest products for the inhabitants of small villages and large towns in Poland

OpenAIRE

Barszcz, Anna; Suder, Alicja

2009-01-01

The NWFPs (non-wood forest products) sector is of the crucial importance to the Polish households but its social and economic role is varied and depends on place of residence. For the inhabitants of villages and small towns forests are the place of working and NWFPs sale provides an additional financial resource. City-dwellers do not treat NWFPs as a source of income but rather as an element of recreation and they use these products mainly for their own needs. Some remarks for the developing ...

The Impact of Charcoal Production on Forest Degradation: a Case Study in Tete, Mozambique

Science.gov (United States)

Sedano, F.; Silva. J. A.; Machoco, R.; Meque, C. H.; Sitoe, A.; Ribeiro, N.; Anderson, K.; Ombe, Z. A.; Baule, S. H.; Tucker, C. J.

2016-01-01

Charcoal production for urban energy consumption is a main driver of forest degradation in sub-Saharan Africa. Urban growth projections for the continent suggest that the relevance of this process will increase in the coming decades. Forest degradation associated to charcoal production is difficult to monitor and commonly overlooked and underrepresented in forest cover change and carbon emission estimates. We use a multi-temporal dataset of very high-resolution remote sensing images to map kiln locations in a representative study area of tropical woodlands in central Mozambique. The resulting maps provided a characterization of the spatial extent and temporal dynamics of charcoal production. Using an indirect approach we combine kiln maps and field information on charcoal making to describe the magnitude and intensity of forest degradation linked to charcoal production, including aboveground biomass and carbon emissions. Our findings reveal that forest degradation associated to charcoal production in the study area is largely independent from deforestation driven by agricultural expansion and that its impact on forest cover change is in the same order of magnitude as deforestation. Our work illustrates the feasibility of using estimates of urban charcoal consumption to establish a link between urban energy demands and forest degradation. This kind of approach has potential to reduce uncertainties in forest cover change and carbon emission assessments in sub-Saharan Africa.

A Basal Area Increment-Based Approach of Site Productivity Evaluation for Multi-Aged and Mixed Forests

Directory of Open Access Journals (Sweden)

Liyong Fu

2017-04-01

Full Text Available Accurate estimates of forest site productivity are essential for environmental planning and forest management. In this study, we developed a new productivity index, hereafter termed basal area potential productivity index (BAPP, to estimate site productivity for irregular and complex forests characterized by multi-aged, multi-species, and multi-layer stands. We presented the biological relevance of BAPP with its computational details. We also compared BAPP against basal area realized productivity (BARP in order to verify the practicability and reliability of BAPP. Time-series data of the national forest inventory on 1912 permanent sample plots that were located in two main forest types and consisted of oak-dominated mixed forests and other broadleaf forests in northeast China were used to demonstrate the application of BAPP. The results showed that the value of BAPP for each sample plot was larger than or equal to the corresponding BARP value for each forest type. For appropriately managed stands with relatively better site conditions, the values of both BARP and BAPP were almost identical. The values of the difference between BAPP and BARP could therefore be used to effectively assess forest site productivity. Meanwhile, BAPP also provides much reliable and valuable information that can aid decision-making in forest management.

Managing forests because carbon matters: integrating energy, products, and land management policy

Science.gov (United States)

Robert W. Malmsheimer; James L. Bowyer; Jeremy S. Fried; Edmund Gee; Robert Izlar; Reid A. Miner; Ian A. Munn; Elaine Oneil; William C. Stewart

2011-01-01

The United States needs many different types of forests: some managed for wood products plus other benefits, and some managed for nonconsumptive uses and benefits. The objective of reducing global greenhouse gases (GHG) requires increasing carbon storage in pools other than the atmosphere. Growing more forests and keeping forests as forests are only part of the...

Forest Products Industry of the Future

Energy Technology Data Exchange (ETDEWEB)

Los Alamos Technical Associates, Inc

2002-05-01

Los Alamos Technical Associates, Inc (LATA) conducted an evaluation of the potential impact and value of a portion of the current portfolio of r&d projects supported by the Office of Industrial Technology and the Forest Products Industry of the Future. The mission of the evaluation was to (a) assess the potential impact of the projects to meet the critical goals of the industry as identified in the vision and roadmapping documents. (b) Evaluate the relationship between the current portfolio of projects and the Agenda 202 Implementation Plan. In addition, evaluate the relationship between the portfolio and the newly revised draft technology strategy being created by the industry. (c) Identify areas where current efforts are making significant progress towards meeting industry goals and identify areas where additional work my be required to meet these goals. (d) Make recommendations to the DOE and the Forest Products Industry on possible improvements in the portfolio and in the current methodology that DOE uses to assess potential impacts on its R&D activities.

Timur (Zanthoxylum armatum) Production in Nepal Dynamics in Nontimber Forest Resource Management

NARCIS (Netherlands)

Hertog, den W.H.; Wiersum, K.F.

2000-01-01

The use of nontimber forest products (NTFPs) in tropical forest management is currently receiving greater attention. Use of NTFPs starts with extraction from natural forests but may gradually be intensified to cultivation of domesticated trees. In order to enhance understanding of the evolutionary

Gender analysis of non-timber forest products (NTFPs) collection ...

African Journals Online (AJOL)

Millions of people, especially those living in rural areas in developing countries collect Non-Timber Forest products (NTFPs) daily. Women are known to play a prominent role in forestry and agricultural production in Nigeria despite not been captured as economically productive. This work looked into gender dimension ...

Changes in carbon storage and oxygen production in forest timber ...

African Journals Online (AJOL)

STORAGESEVER

2009-10-05

Oct 5, 2009 ... treaties and processes, has shown itself around the world and in our country as the concept of planning and ... Key words: Carbon storage, oxygen production, forest management, geographic information systems, land cover change. .... biomass transformation factors developed for the forests in Turkey are ...

Isotopic study of mercury sources and transfer between a freshwater lake and adjacent forest food web

International Nuclear Information System (INIS)

Kwon, Sae Yun; Blum, Joel D.; Nadelhoffer, Knute J.; Timothy Dvonch, J.; Tsui, Martin Tsz-Ki

2015-01-01

Studies of monomethylmercury (MMHg) sources and biogeochemical pathways have been extensive in aquatic ecosystems, but limited in forest ecosystems. Increasing evidence suggests that there is significant mercury (Hg) exchange between aquatic and forest ecosystems. We use Hg stable isotope ratios (δ 202 Hg and Δ 199 Hg) to investigate the relative importance of MMHg sources and assess Hg transfer pathways between Douglas Lake and adjacent forests located at the University of Michigan Biological Station, USA. We characterize Hg isotopic compositions of basal resources and use linear regression of % MMHg versus δ 202 Hg and Δ 199 Hg to estimate Hg isotope values for inorganic mercury (IHg) and MMHg in the aquatic and adjacent forest food webs. In the aquatic ecosystem, we found that lake sediment represents a mixture of IHg pools deposited via watershed runoff and precipitation. The δ 202 Hg and Δ 199 Hg values estimated for IHg are consistent with other studies that measured forest floor in temperate forests. The Δ 199 Hg value estimated for MMHg in the aquatic food web indicates that MMHg is subjected to ~ 20% photochemical degradation prior to bioaccumulation. In the forest ecosystem, we found a significant negative relationship between total Hg and δ 202 Hg and Δ 199 Hg of soil collected at multiple distances from the lakeshore and lake sediment. This suggests that IHg input from watershed runoff provides an important Hg transfer pathway between the forest and aquatic ecosystems. We measured Δ 199 Hg values for high trophic level insects and compared these insects at multiple distances perpendicular to the lake shoreline. The Δ 199 Hg values correspond to the % canopy cover suggesting that forest MMHg is subjected to varying extents of photochemical degradation and the extent may be controlled by sunlight. Our study demonstrates that the use of Hg isotopes adds important new insight into the relative importance of MMHg sources and complex Hg transfer

Isotopic study of mercury sources and transfer between a freshwater lake and adjacent forest food web

Energy Technology Data Exchange (ETDEWEB)

Kwon, Sae Yun, E-mail: saeyunk@umich.edu [Department of Earth and Environmental Sciences, University of Michigan, 1100 N. University Ave, Ann Arbor, MI 48109 (United States); Blum, Joel D. [Department of Earth and Environmental Sciences, University of Michigan, 1100 N. University Ave, Ann Arbor, MI 48109 (United States); Department of Ecology and Evolutionary Biology, University of Michigan, 830 N. University Ave, Ann Arbor, MI 48109 (United States); Nadelhoffer, Knute J. [Department of Ecology and Evolutionary Biology, University of Michigan, 830 N. University Ave, Ann Arbor, MI 48109 (United States); Timothy Dvonch, J. [Department of Environmental Health Sciences, University of Michigan, 1415 Washington Heights, Ann Arbor, MI 48109 (United States); Tsui, Martin Tsz-Ki [Department of Biology, University of North Carolina at Greensboro, 321 McIver Street, Greensboro, NC 27402 (United States)

2015-11-01

Studies of monomethylmercury (MMHg) sources and biogeochemical pathways have been extensive in aquatic ecosystems, but limited in forest ecosystems. Increasing evidence suggests that there is significant mercury (Hg) exchange between aquatic and forest ecosystems. We use Hg stable isotope ratios (δ{sup 202}Hg and Δ{sup 199}Hg) to investigate the relative importance of MMHg sources and assess Hg transfer pathways between Douglas Lake and adjacent forests located at the University of Michigan Biological Station, USA. We characterize Hg isotopic compositions of basal resources and use linear regression of % MMHg versus δ{sup 202}Hg and Δ{sup 199}Hg to estimate Hg isotope values for inorganic mercury (IHg) and MMHg in the aquatic and adjacent forest food webs. In the aquatic ecosystem, we found that lake sediment represents a mixture of IHg pools deposited via watershed runoff and precipitation. The δ{sup 202}Hg and Δ{sup 199}Hg values estimated for IHg are consistent with other studies that measured forest floor in temperate forests. The Δ{sup 199}Hg value estimated for MMHg in the aquatic food web indicates that MMHg is subjected to ~ 20% photochemical degradation prior to bioaccumulation. In the forest ecosystem, we found a significant negative relationship between total Hg and δ{sup 202}Hg and Δ{sup 199}Hg of soil collected at multiple distances from the lakeshore and lake sediment. This suggests that IHg input from watershed runoff provides an important Hg transfer pathway between the forest and aquatic ecosystems. We measured Δ{sup 199}Hg values for high trophic level insects and compared these insects at multiple distances perpendicular to the lake shoreline. The Δ{sup 199}Hg values correspond to the % canopy cover suggesting that forest MMHg is subjected to varying extents of photochemical degradation and the extent may be controlled by sunlight. Our study demonstrates that the use of Hg isotopes adds important new insight into the relative

Alaska’s timber harvest and forest products industry, 2011

Science.gov (United States)

Erik C. Berg; Charles B. Gale; Todd A. Morgan; Allen M. Brackley; Charles E. Keegan; Susan J. Alexander; Glenn A. Christensen; Chelsea P. McIver; Micah G. Scudder

2014-01-01

This report traces the flow of timber harvested in Alaska during calendar year 2011, describes the composition and operations of the state’s primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, export, sales of primary wood products,...

Radioecology and management of contaminated forests

International Nuclear Information System (INIS)

Rantavaara, A.; Aro, L.

2003-01-01

Dose pathways from contaminated forests to man are related to stay in forests and use of forest products. Their contributions to radiation dose vary according to time after deposition and by groups of people. Wild foods are the major source of long-term internal radiation in areas where people collect mushrooms, berries and herbs, or are hunting for their own use, amounting to at least a few kilograms per capita and year. External radiation exposure will hardly exceed internal, even for forest workers. In early phase of fallout situation intercepted radioactive material will retain in tree canopies for a relatively short time. In dense young forests where trees are not too high external exposure is then at maximum because the radiation source in canopy is so close to people in forests and also due to appearance of short-lived radionuclides. Non-wood forest products are of concern to the public for a long time, but slow contamination of timber can in serious fallout situations cause the most harm to forestry. More than 80% of the income of multiple-use forestry in Finland comes from wood. The availability of domestic timber is a major issue and, if disturbed, also socio-economic consequences of contamination would become substantial. Multiple-use forestry, in addition to wood production comprises hunting, picking of berries, mushrooms and medical herbs, decorative materials, Christmas tree market, hiking and other recreational use of forests. Only few of these activities as such mean substantial addition to human radiation doses. Regulations for activity concentrations in commodities, also in various forest products in international market, are probably to be applied in the near future as a result of an IAEA project. Long-term internal exposure through wild foods is of most concern to local citizens from the point of view of radiation protection. The multiple-use forestry in northern Europe includes increasing sectors of recreational services and activities for the

Assessing the Potential for Renewable Energy on National Forest System Lands

Energy Technology Data Exchange (ETDEWEB)

2005-01-01

This technical report and CD for the U.S. Department of Agriculture, Forest Service (USFS), evaluates the potential for renewable energy resource development on National Forest System (NFS) lands. USFS can use the report findings to consider potential for development of solar and wind energy resources on NFS lands, in land management decisions. The Geographical Information System (GIS) based analysis resulted in the following findings: (1) Ninety-nine National Forest Units have high potential for power production from one or more of these solar and wind energy sources; and (2) Twenty National Forest Units in nine states have high potential for power production from two or more of these solar and wind energy sources.

Non-timber forest products of the North-West District of Guyana

OpenAIRE

Andel, T.R. van

2000-01-01

This thesis describes the use of non-timber forest products (NTFPs) by indigenous peoples of northwest Guyana. Part I contains a general analysis of NTFP harvesting in northwest Guyana Part II is an illustrated field guide of the useful plants encountered. Chapter 1: introduction Chapter 2: floristic composition and vegetation structure of well-drained mixed forest and 20- and 60-year old secondary forests. Previous forest inventories predicted a general low diversity for the North-West Distr...

The study of minor forest products

NARCIS (Netherlands)

Jacobs, M.

1982-01-01

Rattans as an example. — ’Minor’ are called all forest products other than timber. Rattan is one of the best-known. In Malaya, according to Dransfield in his book of 1979, there are 104 species; 54 of them are utilized for cane. In addition, 4 are sought for their edible fruits, 5 for their leaves

Informing the improvement of forest products durability using small angle neutron scattering

Science.gov (United States)

Nayomi Plaza Rodriguez; Sai Venkatesh Pingali; Shuo Qian; William T. Heller; Joseph E. Jakes

2016-01-01

A better understanding of how wood nanostructure swells with moisture is needed to accelerate the development of forest products with enhanced moisture durability. Despite its suitability to study nanostructures, small angle neutron scattering (SANS) remains an underutilized tool in forest products research. Nanoscale moisture-induced structural changes in intact and...

The linkages between photosynthesis, productivity, growth and biomass in lowland Amazonian forests.

Science.gov (United States)

Malhi, Yadvinder; Doughty, Christopher E; Goldsmith, Gregory R; Metcalfe, Daniel B; Girardin, Cécile A J; Marthews, Toby R; Del Aguila-Pasquel, Jhon; Aragão, Luiz E O C; Araujo-Murakami, Alejandro; Brando, Paulo; da Costa, Antonio C L; Silva-Espejo, Javier E; Farfán Amézquita, Filio; Galbraith, David R; Quesada, Carlos A; Rocha, Wanderley; Salinas-Revilla, Norma; Silvério, Divino; Meir, Patrick; Phillips, Oliver L

2015-06-01

Understanding the relationship between photosynthesis, net primary productivity and growth in forest ecosystems is key to understanding how these ecosystems will respond to global anthropogenic change, yet the linkages among these components are rarely explored in detail. We provide the first comprehensive description of the productivity, respiration and carbon allocation of contrasting lowland Amazonian forests spanning gradients in seasonal water deficit and soil fertility. Using the largest data set assembled to date, ten sites in three countries all studied with a standardized methodology, we find that (i) gross primary productivity (GPP) has a simple relationship with seasonal water deficit, but that (ii) site-to-site variations in GPP have little power in explaining site-to-site spatial variations in net primary productivity (NPP) or growth because of concomitant changes in carbon use efficiency (CUE), and conversely, the woody growth rate of a tropical forest is a very poor proxy for its productivity. Moreover, (iii) spatial patterns of biomass are much more driven by patterns of residence times (i.e. tree mortality rates) than by spatial variation in productivity or tree growth. Current theory and models of tropical forest carbon cycling under projected scenarios of global atmospheric change can benefit from advancing beyond a focus on GPP. By improving our understanding of poorly understood processes such as CUE, NPP allocation and biomass turnover times, we can provide more complete and mechanistic approaches to linking climate and tropical forest carbon cycling. © 2015 John Wiley & Sons Ltd.

Mapping Russian forest biomass with data from satellites and forest inventories

International Nuclear Information System (INIS)

Houghton, R A; Butman, D; Bunn, A G; Krankina, O N; Schlesinger, P; Stone, T A

2007-01-01

The forests of Russia cover a larger area and hold more carbon than the forests of any other nation and thus have the potential for a major role in global warming. Despite a systematic inventory of these forests, however, estimates of total carbon stocks vary, and spatial variations in the stocks within large aggregated units of land are unknown, thus hampering measurement of sources and sinks of carbon. We mapped the distribution of living forest biomass for the year 2000 by developing a relationship between ground measurements of wood volume at 12 sites throughout the Russian Federation and data from the MODIS satellite bidirectional reflectance distribution function (BRDF) product (MOD43B4). Based on the results of regression-tree analyses, we used the MOD43B4 product to assign biomass values to individual 500 m x 500 m cells in areas identified as forest by two satellite-based maps of land cover. According to the analysis, the total living biomass varied between 46 and 67 Pg, largely because of different estimates of forest area. Although optical data are limited in distinguishing differences in biomass in closed canopy forests, the estimates of total living biomass obtained here varied more in response to different definitions of forest than to saturation of the optical sensing of biomass

Mapping Russian forest biomass with data from satellites and forest inventories

Energy Technology Data Exchange (ETDEWEB)

Houghton, R A [Woods Hole Research Center, 149 Woods Hole Road, Falmouth, MA 02540 (United States); Butman, D [Yale School of Forestry and Environmental Science, Yale University, New Haven, CT 06511 (United States); Bunn, A G [Department of Environmental Sciences, Huxley College of the Environment, Western Washington University, 516 High Street, Bellingham, WA 98225-9181 (United States); Krankina, O N [Department of Forest Science, Oregon State University, 202 Richardson Hall, Corvallis, OR 97331-5752 (United States); Schlesinger, P [Woods Hole Research Center, 149 Woods Hole Road, Falmouth, MA 02540 (United States); Stone, T A [Woods Hole Research Center, 149 Woods Hole Road, Falmouth, MA 02540 (United States)

2007-10-15

The forests of Russia cover a larger area and hold more carbon than the forests of any other nation and thus have the potential for a major role in global warming. Despite a systematic inventory of these forests, however, estimates of total carbon stocks vary, and spatial variations in the stocks within large aggregated units of land are unknown, thus hampering measurement of sources and sinks of carbon. We mapped the distribution of living forest biomass for the year 2000 by developing a relationship between ground measurements of wood volume at 12 sites throughout the Russian Federation and data from the MODIS satellite bidirectional reflectance distribution function (BRDF) product (MOD43B4). Based on the results of regression-tree analyses, we used the MOD43B4 product to assign biomass values to individual 500 m x 500 m cells in areas identified as forest by two satellite-based maps of land cover. According to the analysis, the total living biomass varied between 46 and 67 Pg, largely because of different estimates of forest area. Although optical data are limited in distinguishing differences in biomass in closed canopy forests, the estimates of total living biomass obtained here varied more in response to different definitions of forest than to saturation of the optical sensing of biomass.

Xylaria at the Forest Products Laboratory : past, present, and future

Science.gov (United States)

Regis B. Miller

1999-01-01

This report describes the history and current status of wood collections housed in the Center for Wood Anatomy Research at the Forest Products Laboratory, USDA Forest Service. The collections include the original Madison collection (MADw.) and the collection formerly housed at the Yale School of Forestry, Yale University (...

Does species richness affect fine root biomass and production in young forest plantations?

DEFF Research Database (Denmark)

Domisch, Timo; Finér, Leena; Dawud, Seid Muhie

2015-01-01

Tree species diversity has been reported to increase forest ecosystem above-ground biomass and productivity, but little is known about below-ground biomass and production in diverse mixed forests compared to single-species forests. For testing whether species richness increases below-ground biomass...... and production and thus complementarity between forest tree species in young stands, we determined fine root biomass and production of trees and ground vegetation in two experimental plantations representing gradients in tree species richness. Additionally, we measured tree fine root length and determined...... be that these stands were still young, and canopy closure had not always taken place, i.e. a situation where above- or below-ground competition did not yet exist. Another reason could be that the rooting traits of the tree species did not differ sufficiently to support niche differentiation. Our results suggested...

Humus layer is the main locus of secondary SO4 production in boreal forests

Science.gov (United States)

Houle, Daniel; Marty, Charles; Duchesne, Louis; Gagnon, Christian

2014-02-01

Identifying the sources of S exported from catchments and the reactivity of the large soil organic S pool is crucial to understand the mid- or long-term response of forested catchments to decreasing atmospheric S deposition and global warming. Sulfur fluxes as well as S and O isotopes of SO4 were measured in precipitation, throughfall, soil solutions and streams at two boreal forest catchments respectively dominated by black spruce (BS) and balsam fir (BF) in Quebec, Canada. Overall, δ34S-SO4 signature showed relatively small variations among various solution types. However, at both sites, δ18O-SO4 in precipitation (averages of 10.5-11.1‰) was decreased by 3.5-3.6‰ in throughfall because of the production of secondary SO4 through oxidation of SO2 deposited on the canopy. Throughfall δ18O-SO4 was decreased by a further 5.4-6.6‰ in the solution leaving the humus layer which was attributed to the production of secondary SO4 under the action of soil microorganisms through the oxidation of organic S during which the S atom acquired O from water and gaseous O2 present in the soil. A mixing equation based on known isotopic signature of each source suggested that ˜67-81% of the S-SO4 leaving the catchments had interacted with the canopy and the humus layer. The stability of δ18O-SO4 in the mineral soil solution and in the stream of both sites, suggests that SO4 does not undergo reduction-oxidation cycles after its passage through the humus layer. Despite its huge size, the organic S reservoir within the mineral soil would be largely inert. Given the chemical nature of SO4 transformation in the canopy, the humus layer would be responsible for nearly 100% of the biological production of secondary SO4 in the whole watershed at both sites. Taking into account the substantial production of dissolved organic S in the humus layer further emphasizes the crucial importance of the latter in the S cycling of boreal forests.

Fire in the forest: The air quality dilemma

International Nuclear Information System (INIS)

Core, J.E.

1992-01-01

Fire has long been an important tool of forest land managers. Air regulators responsible for assuring that the provisions of the Clean Air Act are met, see smoke from forest land burning as just another source of air pollution. From an air quality standpoint, pollutants released by forestry burning practices are no different than those emitted from other sources since smoke is smoke, regardless of whether it comes from a woodstove, a wood products industry stack, agricultural burning, or forestry land management. This paper discusses the dilemma that air quality and forest land managers face when balancing air quality protection with the role of fire in the forest

Measurements of the potential ozone production rate in a forest

Science.gov (United States)

Crilley, L.; Sklaveniti, S.; Kramer, L.; Bloss, W.; Flynn, J. H., III; Alvarez, S. L.; Erickson, M.; Dusanter, S.; Locoge, N.; Stevens, P. S.; Millet, D. B.; Alwe, H. D.

2017-12-01

Biogenic volatile organic compounds (BVOC) are a significant source of organic compounds globally and alongside NOx play a key role in the formation of ozone in the troposphere. Understanding how changes in NOx concentrations feed through to altered ozone production in BVOC dominated environments will aid our understanding of future atmospheric composition, notably as developing nations transition from NOx dominated to NOx limited chemistry as a result of mitigation strategies. Here we empirically investigate this ambient ozone formation potential. We report deployment of a custom built instrument to measure in near real time the potential for in situ chemical ozone production, using an artificial light source. Our results are thus indicative of the ozone formation potential for a sampled ambient air mixture, including full VOC complexity, i.e. independent of characterization of individual organic compounds. Ground level measurements were performed as part of the PROPHET-AMOS 2016 field campaign, at a site located within a Northern Michigan forest that has typically low NOx abundance, but high isoprene and terpenoid loadings. As the ambient NOx concentrations were low during the campaign, experiments were performed in which NO was artificially added to the sampled ambient air mixture, to quantify changes in the potential ozone production rate as a function of NOx, and hence the ozone forming characteristics of the ambient air. Preliminarily results from these experiments are presented, and indicate that while ozone production increases with added NO, significant variation was observed for a given NO addition, reflecting differences in the ambient VOC chemical reactivity and ozone formation tendency.

Quantifying the missing link between forest albedo and productivity in the boreal zone

Science.gov (United States)

Hovi, Aarne; Liang, Jingjing; Korhonen, Lauri; Kobayashi, Hideki; Rautiainen, Miina

2016-11-01

Albedo and fraction of absorbed photosynthetically active radiation (FAPAR) determine the shortwave radiation balance and productivity of forests. Currently, the physical link between forest albedo and productivity is poorly understood, yet it is crucial for designing optimal forest management strategies for mitigating climate change. We investigated the relationships between boreal forest structure, albedo and FAPAR using a radiative transfer model called Forest Reflectance and Transmittance model FRT and extensive forest inventory data sets ranging from southern boreal forests to the northern tree line in Finland and Alaska (N = 1086 plots). The forests in the study areas vary widely in structure, species composition, and human interference, from intensively managed in Finland to natural growth in Alaska. We show that FAPAR of tree canopies (FAPARCAN) and albedo are tightly linked in boreal coniferous forests, but the relationship is weaker if the forest has broadleaved admixture, or if canopies have low leaf area and the composition of forest floor varies. Furthermore, the functional shape of the relationship between albedo and FAPARCAN depends on the angular distribution of incoming solar irradiance. We also show that forest floor can contribute to over 50 % of albedo or total ecosystem FAPAR. Based on our simulations, forest albedos can vary notably across the biome. Because of larger proportions of broadleaved trees, the studied plots in Alaska had higher albedo (0.141-0.184) than those in Finland (0.136-0.171) even though the albedo of pure coniferous forests was lower in Alaska. Our results reveal that variation in solar angle will need to be accounted for when evaluating climate effects of forest management in different latitudes. Furthermore, increasing the proportion of broadleaved trees in coniferous forests is the most important means of maximizing albedo without compromising productivity: based on our findings the potential of controlling forest

The Role of Eucalyptus Globulus Forest and Products in Carbon Sequestration

International Nuclear Information System (INIS)

Arroja, L.; Dias, A.C.; Capela, I.

2006-01-01

This study is a contribution to the ongoing debate about the selection of the approach for carbon accounting in wood products to be used, in the future, in the national greenhouse gas inventories under the UNFCCC (United Nations Framework Convention on Climate Change). Two accounting approaches are used in this analysis: the stock-change approach and the atmospheric-flow approach. They are applied to the Portuguese Eucalyptus globulus forest sector. To achieve this objective, the fluxes of wood removed from the forest are tracked through its life cycle, which includes products manufacture (mainly pulp and paper), use and final disposal (landfilling, incineration and composting). This study develops a framework to the estimation of carbon sequestration in the forest of E. globulus, a fast growing species, more specifically, in the calculation of the conversion factors such as bark and foliage percentages and densities, used to convert wood volumes into total biomass. A mass balance approach based on real data from mills is also proposed, in order to assess carbon emissions from wood processing. The results show that E. globulus forest sector was a carbon sink, but the magnitude of the carbon sequestration differs substantially depending on the accounting approach used. The contribution of the forest ecosystem was smaller than the aggregated contribution of wood products in use and in landfills (including industrial waste), which reinforces the role that wood products play in national carbon budgets

Carbon debt and carbon sequestration parity in forest bioenergy production

Science.gov (United States)

S.R. Mitchell; M.E. Harmon; K.B. O' Connell

2012-01-01

The capacity for forests to aid in climate change mitigation efforts is substantial but will ultimately depend on their management. If forests remain unharvested, they can further mitigate the increases in atmospheric CO2 that result from fossil fuel combustion and deforestation. Alternatively, they can be harvested for bioenergy production and...

Forest stand structure, productivity, and age mediate climatic effects on aspen decline

Science.gov (United States)

Bell, David M.; Bradford, John B.; Lauenroth, William K.

2014-01-01

Because forest stand structure, age, and productivity can mediate the impacts of climate on quaking aspen (Populus tremuloides) mortality, ignoring stand-scale factors limits inference on the drivers of recent sudden aspen decline. Using the proportion of aspen trees that were dead as an index of recent mortality at 841 forest inventory plots, we examined the relationship of this mortality index to forest structure and climate in the Rocky Mountains and Intermountain Western United States. We found that forest structure explained most of the patterns in mortality indices, but that variation in growing-season vapor pressure deficit and winter precipitation over the last 20 years was important. Mortality index sensitivity to precipitation was highest in forests where aspen exhibited high densities, relative basal areas, quadratic mean diameters, and productivities, whereas sensitivity to vapor pressure deficit was highest in young forest stands. These results indicate that the effects of drought on mortality may be mediated by forest stand development, competition with encroaching conifers, and physiological vulnerabilities of large trees to drought. By examining mortality index responses to both forest structure and climate, we show that forest succession cannot be ignored in studies attempting to understand the causes and consequences of sudden aspen decline.

Resource communication: Variability in estimated runoff in a forested area based on different cartographic data sources

Directory of Open Access Journals (Sweden)

Laura Fragoso

2017-10-01

Full Text Available Aim of study: The goal of this study is to analyse variations in curve number (CN values produced by different cartographic data sources in a forested watershed, and determine which of them best fit with measured runoff volumes. Area of study: A forested watershed located in western Spain. Material and methods: Four digital cartographic data sources were used to determine the runoff CN in the watershed. Main results: None of the cartographic sources provided all the information necessary to determine properly the CN values. Our proposed methodology, focused on the tree canopy cover, improves the achieved results. Research highlights: The estimation of the CN value in forested areas should be attained as a function of tree canopy cover and new calibrated tables should be implemented in a local scale.

AUTOCLASSIFICATION OF THE VARIABLE 3XMM SOURCES USING THE RANDOM FOREST MACHINE LEARNING ALGORITHM

International Nuclear Information System (INIS)

Farrell, Sean A.; Murphy, Tara; Lo, Kitty K.

2015-01-01

In the current era of large surveys and massive data sets, autoclassification of astrophysical sources using intelligent algorithms is becoming increasingly important. In this paper we present the catalog of variable sources in the Third XMM-Newton Serendipitous Source catalog (3XMM) autoclassified using the Random Forest machine learning algorithm. We used a sample of manually classified variable sources from the second data release of the XMM-Newton catalogs (2XMMi-DR2) to train the classifier, obtaining an accuracy of ∼92%. We also evaluated the effectiveness of identifying spurious detections using a sample of spurious sources, achieving an accuracy of ∼95%. Manual investigation of a random sample of classified sources confirmed these accuracy levels and showed that the Random Forest machine learning algorithm is highly effective at automatically classifying 3XMM sources. Here we present the catalog of classified 3XMM variable sources. We also present three previously unidentified unusual sources that were flagged as outlier sources by the algorithm: a new candidate supergiant fast X-ray transient, a 400 s X-ray pulsar, and an eclipsing 5 hr binary system coincident with a known Cepheid.

Forest Products: Apparatus for Removing Bark from Whole Logs

International Nuclear Information System (INIS)

Poole, Lauren; Recca, Lee

1999-01-01

Order this fact sheet now to learn how replacing the ''closed drum'' debarking technology method used in the forest industry with the ''open drum'' method saves time and production costs, and increases the economic value of wood products by inflicting less damage on logs so that they can be used for high-value economic products

Empowering Women and Ethnic Minority Groups to Collectively Market non Timber Forest Products from Community Forests in Cameroon

NARCIS (Netherlands)

Eijnatten, van Judith; Mala, William Armand; Ingram, V.J.; Belibi, M.B.

2016-01-01

Community forestry (CF) was introduced in Cameroon in 1994 as a way to reduce poverty and enhance sustainable forest management. CF activities have primarily focused on timber exploitation rather than non-timber forest product (NTFP) collection processing or marketing. The study reports on a two

Modeling belowground biomass of black cohosh, a medicinal forest product.

Science.gov (United States)

James Chamberlain; Gabrielle Ness; Christine Small; Simon Bonner; Elizabeth Hiebert

2014-01-01

Tens of thousands of kilograms of rhizomes and roots of Actaea racemosa L., a native Appalachian forest perennial, are harvested every year and used for the treatment of menopausal conditions. Sustainable management of this and other wild-harvested non-timber forest products requires the ability to effectively and reliably inventory marketable plant...

Forest biomass, productivity and carbon cycling along a rainfall gradient in West Africa.

Science.gov (United States)

Moore, Sam; Adu-Bredu, Stephen; Duah-Gyamfi, Akwasi; Addo-Danso, Shalom D; Ibrahim, Forzia; Mbou, Armel T; de Grandcourt, Agnès; Valentini, Riccardo; Nicolini, Giacomo; Djagbletey, Gloria; Owusu-Afriyie, Kennedy; Gvozdevaite, Agne; Oliveras, Imma; Ruiz-Jaen, Maria C; Malhi, Yadvinder

2018-02-01

Net Primary Productivity (NPP) is one of the most important parameters in describing the functioning of any ecosystem and yet it arguably remains a poorly quantified and understood component of carbon cycling in tropical forests, especially outside of the Americas. We provide the first comprehensive analysis of NPP and its carbon allocation to woody, canopy and root growth components at contrasting lowland West African forests spanning a rainfall gradient. Using a standardized methodology to study evergreen (EF), semi-deciduous (SDF), dry forests (DF) and woody savanna (WS), we find that (i) climate is more closely related with above and belowground C stocks than with NPP (ii) total NPP is highest in the SDF site, then the EF followed by the DF and WS and that (iii) different forest types have distinct carbon allocation patterns whereby SDF allocate in excess of 50% to canopy production and the DF and WS sites allocate 40%-50% to woody production. Furthermore, we find that (iv) compared with canopy and root growth rates the woody growth rate of these forests is a poor proxy for their overall productivity and that (v) residence time is the primary driver in the productivity-allocation-turnover chain for the observed spatial differences in woody, leaf and root biomass across the rainfall gradient. Through a systematic assessment of forest productivity we demonstrate the importance of directly measuring the main components of above and belowground NPP and encourage the establishment of more permanent carbon intensive monitoring plots across the tropics. © 2017 John Wiley & Sons Ltd.

Costs, CO{sub 2}- and primary energy balances of forest-fuel recovery systems at different forest productivity

Energy Technology Data Exchange (ETDEWEB)

Eriksson, Lisa; Gustavsson, Leif [Ecotechnology, Department of Engineering and Sustainable Development, Mid Sweden University, SE-831 25 Oestersund (Sweden)

2010-05-15

Here we examine the cost, primary energy use, and net carbon emissions associated with removal and use of forest residues for energy, considering different recovery systems, terrain, forwarding distance and forest productivity. We show the potential recovery of forest fuel for Sweden, its costs and net carbon emissions from primary energy use and avoided fossil carbon emissions. The potential annual net recovery of forest fuel is about 66 TWh, which would cost one billion EUR{sub 2005} to recover and would reduce fossil emissions by 6.9 Mt carbon if coal were replaced. Of the forest fuel, 56% is situated in normal terrain with productivity of >30 t dry-matter ha{sup -1} and of this, 65% has a forwarding distance of <400 m. In normal terrain with >30 t dry-matter ha{sup -1} the cost increase for the recovery of forest fuel, excluding stumps, is around 4-6% and 8-11% for medium and longer forwarding distances, respectively. The stump and small roundwood systems are less cost-effective at lower forest fuel intensity per area. For systems where loose material is forwarded, less dry-matter per hectare increases costs by 6-7%, while a difficult terrain increases costs by 3-4%. Still, these systems are quite cost-effective. The cost of spreading ash is around 40 EUR{sub 2005} ha{sup -1}, while primary energy use for spreading ash in areas where logging residues, stumps, and small roundwood are recovered is about 0.025% of the recovered bioenergy. (author)

Accounting for forest carbon pool dynamics in product carbon footprints: Challenges and opportunities

International Nuclear Information System (INIS)

Newell, Joshua P.; Vos, Robert O.

2012-01-01

Modification and loss of forests due to natural and anthropogenic disturbance contribute an estimated 20% of annual greenhouse gas (GHG) emissions worldwide. Although forest carbon pool modeling rarely suggests a ‘carbon neutral’ flux profile, the life cycle assessment community and associated product carbon footprint protocols have struggled to account for the GHG emissions associated with forestry, specifically, and land use generally. Principally, this is due to underdeveloped linkages between life cycle inventory (LCI) modeling for wood and forest carbon modeling for a full range of forest types and harvest practices, as well as a lack of transparency in globalized forest supply chains. In this paper, through a comparative study of U.S. and Chinese coated freesheet paper, we develop the initial foundations for a methodology that rescales IPCC methods from the national to the product level, with reference to the approaches in three international product carbon footprint protocols. Due to differences in geographic origin of the wood fiber, the results for two scenarios are highly divergent. This suggests that both wood LCI models and the protocols need further development to capture the range of spatial and temporal dimensions for supply chains (and the associated land use change and modification) for specific product systems. The paper concludes by outlining opportunities to measure and reduce uncertainty in accounting for net emissions of biogenic carbon from forestland, where timber is harvested for consumer products. - Highlights: ► Typical life cycle assessment practice for consumer products often excludes significant land use change emissions when estimating carbon footprints. ► The article provides a methodology to rescale IPCC guidelines for product-level carbon footprints. ► Life cycle inventories and product carbon footprint protocols need more comprehensive land use-related accounting. ► Interdisciplinary collaboration linking the LCA and

Some Drivers of Change in Forest Conditions in Africa | Kowero ...

African Journals Online (AJOL)

Discovery and Innovation ... Open Access DOWNLOAD FULL TEXT ... important to livelihoods of rural communities, as habitats of wildlife, sources of genetic ... land, in addition to forests supplying wood and other non-wood forest products for

Divergence in Forest-Type Response to Climate and Weather: Evidence for Regional Links Between Forest-Type Evenness and Net Primary Productivity

Science.gov (United States)

Bradford, J.B.

2011-01-01

Climate change is altering long-term climatic conditions and increasing the magnitude of weather fluctuations. Assessing the consequences of these changes for terrestrial ecosystems requires understanding how different vegetation types respond to climate and weather. This study examined 20 years of regional-scale remotely sensed net primary productivity (NPP) in forests of the northern Lake States to identify how the relationship between NPP and climate or weather differ among forest types, and if NPP patterns are influenced by landscape-scale evenness of forest-type abundance. These results underscore the positive relationship between temperature and NPP. Importantly, these results indicate significant differences among broadly defined forest types in response to both climate and weather. Essentially all weather variables that were strongly related to annual NPP displayed significant differences among forest types, suggesting complementarity in response to environmental fluctuations. In addition, this study found that forest-type evenness (within 8 ?? 8 km2 areas) is positively related to long-term NPP mean and negatively related to NPP variability, suggesting that NPP in pixels with greater forest-type evenness is both higher and more stable through time. This is landscape- to subcontinental-scale evidence of a relationship between primary productivity and one measure of biological diversity. These results imply that anthropogenic or natural processes that influence the proportional abundance of forest types within landscapes may influence long-term productivity patterns. ?? 2011 Springer Science+Business Media, LLC (outside the USA).

Assessing soil quality: practicable standards for sustainable forest productivity in the United States

Science.gov (United States)

Robert F. Powers; Allan E. Tiarks; James R. Boyle

1998-01-01

Productive soils form the foundation for productive forests. But unfortunately, the significance of soil seems lost to modem society. Most of us are too far removed from the natural factors of production to appreciate the multiple roles of soil. Nor is its worth recognized well by many forest managers who too often see soil only in its capacity for logging roads and...

Sustainable forest management of tropical forests can reduce carbon emissions and stabilize timber production

Science.gov (United States)

N. Sasaki; G.P. Asner; Yude Pan; W. Knorr; P.B. Durst; H.O. Ma; I. Abe; A.J. Lowe; L.P. Koh

2016-01-01

The REDD+ scheme of the United Nations Framework Conventionon Climate Change has provided opportunities to manage tropical forests for timber production and carbon emission reductions. To determine the appropriate loggingtechniques, we analyzed potential timber production and carbon emission reductions under two logging techniques over a 40-year period of selective...

Disturbance, complexity, and succession of net ecosystem production in North America’s temperate deciduous forests

Energy Technology Data Exchange (ETDEWEB)

Gough, Christopher; Curtis, Peter; Hardiman, Brady; Scheuermann, Cynthia; Bond-Lamberty, Benjamin

2016-06-29

Century-old forests in the U.S. upper Midwest and Northeast power much of North Amer- ica’s terrestrial carbon (C) sink, but these forests’ production and C sequestration capacity are expected to soon decline as fast-growing early successional species die and are replaced by slower growing late successional species. But will this really happen? Here we marshal empirical data and ecological theory to argue that substantial declines in net ecosystem production (NEP) owing to reduced forest growth, or net primary production (NPP), are not imminent in regrown temperate deciduous forests over the next several decades. Forest age and production data for temperate deciduous forests, synthesized from published literature, suggest slight declines in NEP and increasing or stable NPP during middle successional stages. We revisit long-held hypotheses by EP Odum and others that suggest low-severity, high-frequency disturbances occurring in the region’s aging forests will, against intuition, maintain NEP at higher-than- expected rates by increasing ecosystem complexity, sustaining or enhancing NPP to a level that largely o sets rising C losses as heterotrophic respiration increases. This theoretical model is also supported by biological evidence and observations from the Forest Accelerated Succession Experiment in Michigan, USA. Ecosystems that experience high-severity disturbances that simplify ecosystem complexity can exhibit substantial declines in production during middle stages of succession. However, observations from these ecosystems have exerted a disproportionate in uence on assumptions regarding the trajectory and magnitude of age-related declines in forest production. We conclude that there is a wide ecological space for forests to maintain NPP and, in doing so, lessens the declines in NEP, with signi cant implications for the future of the North American carbon sink. Our intellectual frameworks for understanding forest C cycle dynamics and resilience need to

Forest communities in the third millennium: linking research, business, and policy toward a sustainable non-timber forest product sector.

Science.gov (United States)

Iain Davidson-Hunt; Luc C. Duchesne; John C., eds. Zasada

2001-01-01

Contains a wide variety of papers given at the first international conference on non-timber forest products (NTFP) in cold temperate and boreal forests. Focuses on many facets of NTFPs: economics, society, biology, resource management, business development, and others.

Strategies for Sustainable Development of Non-Timber Forest Products in Senegal

OpenAIRE

Sene, Abdou

2001-01-01

In recent years, forests have been increasingly recognized as rich reservoirs for many valuable biological resources. As a result of the devastation caused by drought, clearing land for agriculture, and overexploitation of timber, there has been a growing interest in non-timber forest products (NTFPs). The Senegal Forestry Action Plan, designed to ensure sustainable forest management, stresses the importance of identifying the constraints to and opportunities for sustainable development of no...

SURVEY ON NON-TIMBER FOREST PRODUCTS IN BAUCHI ...

African Journals Online (AJOL)

User

allow for the production of bush meats, rattan, bamboo, traditional medicines, honey and other forest food. ... marketed or have socio-cultural, religious significance (FAO, 1990; Tee ... most of which are consumed within the household of the.

Fire intensity impacts on post-fire temperate coniferous forest net primary productivity

Science.gov (United States)

Sparks, Aaron M.; Kolden, Crystal A.; Smith, Alistair M. S.; Boschetti, Luigi; Johnson, Daniel M.; Cochrane, Mark A.

2018-02-01

Fire is a dynamic ecological process in forests and impacts the carbon (C) cycle through direct combustion emissions, tree mortality, and by impairing the ability of surviving trees to sequester carbon. While studies on young trees have demonstrated that fire intensity is a determinant of post-fire net primary productivity, wildland fires on landscape to regional scales have largely been assumed to either cause tree mortality, or conversely, cause no physiological impact, ignoring the impacted but surviving trees. Our objective was to understand how fire intensity affects post-fire net primary productivity in conifer-dominated forested ecosystems on the spatial scale of large wildland fires. We examined the relationships between fire radiative power (FRP), its temporal integral (fire radiative energy - FRE), and net primary productivity (NPP) using 16 years of data from the MOderate Resolution Imaging Spectrometer (MODIS) for 15 large fires in western United States coniferous forests. The greatest NPP post-fire loss occurred 1 year post-fire and ranged from -67 to -312 g C m-2 yr-1 (-13 to -54 %) across all fires. Forests dominated by fire-resistant species (species that typically survive low-intensity fires) experienced the lowest relative NPP reductions compared to forests with less resistant species. Post-fire NPP in forests that were dominated by fire-susceptible species were not as sensitive to FRP or FRE, indicating that NPP in these forests may be reduced to similar levels regardless of fire intensity. Conversely, post-fire NPP in forests dominated by fire-resistant and mixed species decreased with increasing FRP or FRE. In some cases, this dose-response relationship persisted for more than a decade post-fire, highlighting a legacy effect of fire intensity on post-fire C dynamics in these forests.

Special forest products: integrating social, economic, and biological considerations into ecosystem management.

Science.gov (United States)

R. Molina; N. Vance; J.F. Weigand; D. Pilz; M.P. Amaranthus

1997-01-01

Throughout history, forests have provided a wealth of beneficial and essential products ranging from foods and medicines to building materials. Ancient pharmacopoeias list myriad forest plants and fungi for treating various ailments. Many of these ancient remedies have evolved and continue to evolve into the important drugs of modern medicine. Use of diverse forest...

trade on non-timber forest products (ntfps) between south west ...

African Journals Online (AJOL)

DJFLEX

KEY WORDS: NTFPs, Trade, Trans-boundary, Ejagham, Forest Reserve. INTRODUCTION .... Table 1: Identified NTFPs, sources and relative abundance in the Study Area. Common Names ..... The role of research for a balance between.

Forests in the balance: linking tradition and technology in landscape mosaics

Science.gov (United States)

Margaret S. Devall; Geoffrey C. Smith

2007-01-01

The future of forests around the world is uncertain: forests are being cleared and the lands converted to other uses, while existing forests face many challenges from a variety of sources. The pressures on forests come from two usually opposing perspectives, timber production and wildlife conservation. This special issue volume attempts to bridge between these two...

LEVERAGING RURAL LIVELIHOODS WITH FOREST CONSERVATION IN NIGERIA: THE ROLE OF NON-TIMBER FOREST PRODUCTS

Directory of Open Access Journals (Sweden)

Egbe BASSEY ETOWA

2015-03-01

Full Text Available In recent times some economists view Non-Timber Forest Products (NTFPs extraction and marketing as a better alternative to timber exploitation as a rural livelihood strategy. Harvesting and sale of NTFPs have the potential for accomplishing the dual goals of natural forest conservation and income generation for the rural inhabitants. Meanwhile, realization of these dual goals in Nigeria, require an understanding of how NTFPs functions in the face of marketing, ecological, geographic and institutional constraints. Following a conceptualization of NTFPs, this paper provides a vivid overview of the simultaneous roles of NTFPs in rural livelihood enhancement and forest conservation in Nigeria. It highlights governmental initiatives with respect to conservation, the challenges and prospects of NTFPs as a conservation strategy. Conclusively, the paper suggests that appropriate NTFPs development policies are required to simultaneously address forest depletion and poverty in rural areas of Nigeria.

The role of nutrients, productivity and climate in determining tree fruit production in European forests.

Science.gov (United States)

Fernández-Martínez, Marcos; Vicca, Sara; Janssens, Ivan A; Espelta, Josep Maria; Peñuelas, Josep

2017-01-01

Fruit production (NPP f ), the amount of photosynthates allocated to reproduction (%GPP f ) and their controls for spatial and species-specific variability (e.g. nutrient availability, climate) have been poorly studied in forest ecosystems. We characterized fruit production and its temporal behaviour for several tree species and resolved the effects of gross primary production (GPP), climate and foliar nutrient concentrations. We used data for litterfall and foliar nutrient concentration from 126 European forests and related them to climatic data. GPP was estimated for each forest using a regression model. Mean NPP f ranged from c. 10 to 40 g C m -2  yr -1 and accounted for 0.5-3% of GPP. Forests with higher GPPs produced larger fruit crops. Foliar zinc (Zn) and phosphorus (P) concentrations were associated positively with NPP f , whereas foliar Zn and potassium (K) were negatively related to its temporal variability. Maximum NPP f and interannual variability of NPP f were higher in Fagaceae than in Pinaceae species. NPP f and %GPP f were similar amongst the studied species despite the different reproductive temporal behaviour of Fagaceae and Pinaceae species. We report that foliar concentrations of P and Zn are associated with %GPP f , NPP f and its temporal behaviour. © 2016 The Authors. New Phytologist © 2016 New Phytologist Trust.

Combining Multi-Source Remotely Sensed Data and a Process-Based Model for Forest Aboveground Biomass Updating.

Science.gov (United States)

Lu, Xiaoman; Zheng, Guang; Miller, Colton; Alvarado, Ernesto

2017-09-08

Monitoring and understanding the spatio-temporal variations of forest aboveground biomass (AGB) is a key basis to quantitatively assess the carbon sequestration capacity of a forest ecosystem. To map and update forest AGB in the Greater Khingan Mountains (GKM) of China, this work proposes a physical-based approach. Based on the baseline forest AGB from Landsat Enhanced Thematic Mapper Plus (ETM+) images in 2008, we dynamically updated the annual forest AGB from 2009 to 2012 by adding the annual AGB increment (ABI) obtained from the simulated daily and annual net primary productivity (NPP) using the Boreal Ecosystem Productivity Simulator (BEPS) model. The 2012 result was validated by both field- and aerial laser scanning (ALS)-based AGBs. The predicted forest AGB for 2012 estimated from the process-based model can explain 31% ( n = 35, p forest AGBs, respectively. However, due to the saturation of optical remote sensing-based spectral signals and contribution of understory vegetation, the BEPS-based AGB tended to underestimate/overestimate the AGB for dense/sparse forests. Generally, our results showed that the remotely sensed forest AGB estimates could serve as the initial carbon pool to parameterize the process-based model for NPP simulation, and the combination of the baseline forest AGB and BEPS model could effectively update the spatiotemporal distribution of forest AGB.

Genetics and Forest Seed Handling

DEFF Research Database (Denmark)

Schmidt, Lars Holger

2016-01-01

High genetic quality seed is obtained from seed sources that match the planting site, have a good outcrossing rate, and are superior in some desirable characters. Non-degraded natural forests and plantations may be used as untested seed sources, which can sometimes be managed to promote outbreeding...... and increase seed production. Planted seed orchards aim at capturing large genetic variation and are planted in a design that facilitates genetic evaluation and promotes outbred seed production. Good seed production relies upon success of the whole range of reproductive events from flower differentiation...

Amazon Forest maintenance as a source of environmental services

Directory of Open Access Journals (Sweden)

Philip M. Fearnside

2008-03-01

Full Text Available Amazonian forest produces environmental services such as maintenance of biodiversity, water cycling and carbon stocks. These services have a much greater value to human society than do the timber, beef and other products that are obtained by destroying the forest. Yet institutional mechanisms are still lacking to transform the value of the standing forest into the foundation of an economy based on maintaining rather than destroying this ecosystem. Forest management for commodities such as timber and non-timber forest products faces severe limitations and inherent contradictions unless income is supplemented based on environmenta lservices. Amazon forest is threatened by deforestation, logging, forest fires and climate change. Measures to avoid deforestation include repression through command and control, creation of protected areas, and reformulation of infrastructure decisions and development policies. An economy primarily based on the value of environmental services is essential for long-term maintenance of the forest. Much progress has been made in the decades since I first proposed such a transition, but many issues also remain unresolved. These include theoretical issues regarding accounting procedures, improved quantification of the services and of the benefits of different policy options, and effective uses of the funds generated in ways that maintain both the forest and the human population.A floresta amazônica produz serviços ambientais, tais como a manutenção da biodiversidade, da ciclagem de água e dos estoques de carbono. Estes serviços têm um valor muito maior para a sociedade humana do que a madeira, carne bovina e outros produtos que são obtidos destruindo a floresta. Mecanismos institucionais ainda estão faltando para transformar o valor da floresta em pé no alicerce de uma economia baseada em manter, em lugar de destruir, este ecossistema. Manejo florestal para madeira e para produtos florestais n

Economic and environmental effects of accelerated tariff liberalization in the forest products sector.

Science.gov (United States)

D.J. Brooks; J.A. Ferrante; J. Haverkamp; I. Bowles; W. Lange; D. Darr

2001-01-01

This study assesses the incremental economic and environmental impacts resulting from changes in the timing and scope of forest products tariff reductions as proposed in the Accelerated Tariff Liberalization (ATL) initiative in forest products. This initiative was proposed for agreement among member countries of the World Trade Organization. The analysis of...

Primary energy and greenhouse gas implications of increasing biomass production through forest fertilization

Energy Technology Data Exchange (ETDEWEB)

Sathre, Roger [Ecotechnology, Mid Sweden University, Ostersund (Sweden); Gustavsson, Leif [Ecotechnology, Mid Sweden University, Ostersund (Sweden); Bergh, Johan [Ecotechnology, Mid Sweden University, Ostersund (Sweden); Southern Swedish Forest Research Centre, Swedish University of Agricultural Sciences, Alnarp (Sweden)

2010-04-15

In this study we analyze the primary energy and greenhouse gas (GHG) implications of increasing biomass production by fertilizing 10% of Swedish forest land. We estimate the primary energy use and GHG emissions from forest management including production and application of N and NPK fertilizers. Based on modelled growth response, we then estimate the net primary energy and GHG benefits of using biomaterials and biofuels obtained from the increased forest biomass production. The results show an increased annual biomass harvest of 7.4 million t dry matter, of which 41% is large-diameter stemwood. About 6.9 PJ/year of additional primary energy input is needed for fertilizer production and forest management. Using the additional biomass for fuel and material substitution can reduce fossil primary energy use by 150 or 164 PJ/year if the reference fossil fuel is fossil gas or coal, respectively. About 22% of the reduced fossil energy use is due to material substitution and the remainder is due to fuel substitution. The net annual primary energy benefit corresponds to about 7% of Sweden's total primary energy use. The resulting annual net GHG emission reduction is 11.9 million or 18.1 million tCO{sub 2equiv} if the reference fossil fuel is fossil gas or coal, respectively, corresponding to 18% or 28% of the total Swedish GHG emissions in 2007. A significant one-time carbon stock increase also occurs in wood products and forest tree biomass. These results suggest that forest fertilization is an attractive option for increasing energy security and reducing net GHG emission.

Primary energy and greenhouse gas implications of increasing biomass production through forest fertilization

International Nuclear Information System (INIS)

Sathre, Roger; Gustavsson, Leif; Bergh, Johan

2010-01-01

In this study we analyze the primary energy and greenhouse gas (GHG) implications of increasing biomass production by fertilizing 10% of Swedish forest land. We estimate the primary energy use and GHG emissions from forest management including production and application of N and NPK fertilizers. Based on modelled growth response, we then estimate the net primary energy and GHG benefits of using biomaterials and biofuels obtained from the increased forest biomass production. The results show an increased annual biomass harvest of 7.4 million t dry matter, of which 41% is large-diameter stemwood. About 6.9 PJ/year of additional primary energy input is needed for fertilizer production and forest management. Using the additional biomass for fuel and material substitution can reduce fossil primary energy use by 150 or 164 PJ/year if the reference fossil fuel is fossil gas or coal, respectively. About 22% of the reduced fossil energy use is due to material substitution and the remainder is due to fuel substitution. The net annual primary energy benefit corresponds to about 7% of Sweden's total primary energy use. The resulting annual net GHG emission reduction is 11.9 million or 18.1 million tCO 2equiv if the reference fossil fuel is fossil gas or coal, respectively, corresponding to 18% or 28% of the total Swedish GHG emissions in 2007. A significant one-time carbon stock increase also occurs in wood products and forest tree biomass. These results suggest that forest fertilization is an attractive option for increasing energy security and reducing net GHG emission.

Primary energy and greenhouse gas implications of increasing biomass production through forest fertilization

Energy Technology Data Exchange (ETDEWEB)

Sathre, Roger; Gustavsson, Leif [Ecotechnology, Mid Sweden University, Oestersund (Sweden); Bergh, Johan [Ecotechnology, Mid Sweden University, Oestersund (Sweden); Southern Swedish Forest Research Centre, Swedish University of Agricultural Sciences, Alnarp (Sweden)

2010-04-15

In this study we analyze the primary energy and greenhouse gas (GHG) implications of increasing biomass production by fertilizing 10% of Swedish forest land. We estimate the primary energy use and GHG emissions from forest management including production and application of N and NPK fertilizers. Based on modelled growth response, we then estimate the net primary energy and GHG benefits of using biomaterials and biofuels obtained from the increased forest biomass production. The results show an increased annual biomass harvest of 7.4 million t dry matter, of which 41% is large-diameter stemwood. About 6.9 PJ/year of additional primary energy input is needed for fertilizer production and forest management. Using the additional biomass for fuel and material substitution can reduce fossil primary energy use by 150 or 164 PJ/year if the reference fossil fuel is fossil gas or coal, respectively. About 22% of the reduced fossil energy use is due to material substitution and the remainder is due to fuel substitution. The net annual primary energy benefit corresponds to about 7% of Sweden's total primary energy use. The resulting annual net GHG emission reduction is 11.9 million or 18.1 million tCO{sub 2equiv} if the reference fossil fuel is fossil gas or coal, respectively, corresponding to 18% or 28% of the total Swedish GHG emissions in 2007. A significant one-time carbon stock increase also occurs in wood products and forest tree biomass. These results suggest that forest fertilization is an attractive option for increasing energy security and reducing net GHG emission. (author)

Sources of long-lived atmospheric VOCs at the rural boreal forest site, SMEAR II

Science.gov (United States)

Patokoski, J.; Ruuskanen, T. M.; Kajos, M. K.; Taipale, R.; Rantala, P.; Aalto, J.; Ryyppö, T.; Nieminen, T.; Hakola, H.; Rinne, J.

2015-12-01

In this study a long-term volatile organic compound (VOCs) concentration data set, measured at the SMEAR II (Station for Measuring Ecosystem-Atmosphere Relations) boreal forest site in Hyytiälä, Finland during the years 2006-2011, was analyzed in order to identify source areas and profiles of the observed VOCs. VOC mixing ratios were measured using proton transfer reaction mass spectrometry. Four-day HYSPLIT 4 (Hybrid Single Particle Lagrangian Integrated Trajectory) backward trajectories and the Unmix 6.0 receptor model were used for source area and source composition analysis. Two major forest fire events in Russia took place during the measurement period. The effect of these fires was clearly visible in the trajectory analysis, lending confidence to the method employed with this data set. Elevated volume mixing ratios (VMRs) of non-biogenic VOCs related to forest fires, e.g. acetonitrile and aromatic VOCs, were observed. Ten major source areas for long-lived VOCs (methanol, acetonitrile, acetaldehyde, acetone, benzene, and toluene) observed at the SMEAR II site were identified. The main source areas for all the targeted VOCs were western Russia, northern Poland, Kaliningrad, and the Baltic countries. Industrial areas in northern continental Europe were also found to be source areas for certain VOCs. Both trajectory and receptor analysis showed that air masses from northern Fennoscandia were less polluted with respect to both the VOCs studied and other trace gases (CO, SO2 and NOx), compared to areas of eastern and western continental Europe, western Russia, and southern Fennoscandia.

Carbon and nitrogen distribution in oak-hickory forests distributed along a productivity gradient

Energy Technology Data Exchange (ETDEWEB)

Reber, R.T.; Kaczmarek, D.J.; Pope, P.E.; Rodkey, K.S. [Purdue Univ., West Lafayette, IN (United States)

1993-12-31

Biomass, carbon and nitrogen pools were determined for oak-hickory forests of varying productivity. Little information of this type is available for the central hardwood region. Six oak-hickory dominated forests were chosen to represent a range in potential site productivity as influenced by soil type, amount of recyclable nutrients and available water. Biomass, carbon and nitrogen storage were determined for the following components: above ground standing biomass, fine root biomass, forest floor organic layers and litterfall. As site sequestered at each site was dependent more on the amount of living biomass at each site Litterfall, to some extent, increased with increasing site productivity. As potential site productivity decreased, total fine root biomass increased. The data suggest that as site quality decreased fine root production and turnover may become as important in nutrient cycling as annual litterfall.

Production of nitrous oxide and consumption of methane by forest soils

Science.gov (United States)

Keller, M.; Wofsy, S. C.; Kaplan, W. A.; Mcelroy, M. B.; Goreau, T. J.

1983-01-01

Soils in an Amazonian rainforest are observed to release N2O at a rate larger than the global mean by about a factor of 20. Emissions from a New England hardwood forest are approximately 30 times smaller then Brazilian values. Atmospheric methane is consumed by soils in both systems. Tropical forests would provide a major source of atmospheric N2O if the Brazilian results are representative.

Non-timber forest products in Central Appalachia: market opportunities for rural development (poster abstract)

Science.gov (United States)

A.L. Hammett; J.L. Chamberlain

1999-01-01

The gathering of forest products has supplemented the incomes of Central Appalachia residents for many generations. Non-timber forest products (NTFPs) can be grouped within four general categories: edibles such as mushrooms; medicinal and dietary supplements, including ginseng, gingko, and St. John?s wort; floral products such as moss, grape vines, and ferns; and...

Linking climate, gross primary productivity, and site index across forests of the western United States

Science.gov (United States)

Aaron R. Weiskittel; Nicholas L. Crookston; Philip J. Radtke

2011-01-01

Assessing forest productivity is important for developing effective management regimes and predicting future growth. Despite some important limitations, the most common means for quantifying forest stand-level potential productivity is site index (SI). Another measure of productivity is gross primary production (GPP). In this paper, SI is compared with GPP estimates...

36 CFR 223.277 - Forest botanical products definition.

Science.gov (United States)

2010-07-01

..., boughs, bryophytes, bulbs, burls, cones, ferns, fungi (including mushrooms), forbs, grasses, mosses, nuts, pine straw, roots, sedges, seeds, shrubs, transplants, tree sap, and wildflowers. Forest botanical products are not animals, animal parts, Christmas trees, fence material, firewood, insects, mine props...

THE IMPORTANCE OF FOREST AND LANDSCAPE RESOURCE FOR COMMUNITY AROUND GUNUNG LUMUT PROTECTED FOREST, EAST KALIMANTAN

Directory of Open Access Journals (Sweden)

Murniati Murniati

2009-06-01

Full Text Available The forest of Gunung  Lumut  in Pasir District,  East Kalimantan was designated  for a protection  forest in 1983. It is surrounded  by 15 villages  and one settlement  lies inside it. Communities in those villages are dependent upon the landscape and forest resources mainly for non timber forest products. This study was focused on the perception of the communities on the importance of the landscape and forests. The study was conducted in two settlements, located  in and outside  (near  the protection  forest,  namely  Rantau  Layung  Village  and Mului  Sub-Village.  Data collection  was undertaken through  general field observations, key- informant personal  interviews and focus group  discussions.  In Rantau  Layung, the most important land  type  was rice  field, whereas  in Mului  was forest.  There  were  13 and 14 use categories  of landscape  resources  in Rantau  Layung  and Mului,  respectively, such as food, medicine,  constructions and source of income.  People in Rantau  Layung  and Mului ranked  plants  to be more  important than  animals.  People  also considered  products  from wild  resources  to be more  important than  those from cultivated  and purchased  sources. Communities living  in both  settlements  considered  the future  uses of forests to be the most important as compared to those of the present and past. They  suggested that sungkai (Peronema canescens and telien (Eusideroxylon zwageri to be the most important plants while payau  (Cervus unicolor and telaus (Muntiacus muntjak to be the most important animals. People used the wildlife mainly for food and source of income. They also identified important and potential  resources for economic  development in the area, i.e. ecotourism  and hydro- power for electric  generator.

Forest certification in Bolivia: A status report and analysis of stakeholder perspectives

Science.gov (United States)

Omar Espinoza; Michael J. Dockry

2014-01-01

Forest certification systems are voluntary, market-based initiatives to promote the sustainable use of forests. The assumption is that consumers prefer sustainably sourced wood products. One of the major drivers for the creation of forest certification was to prevent deforestation in tropical forests. However, after 20 years of certification, only 10 percent of the...

Ecological and biological considerations for sustainable management of non-timber forest products in northern forests

Science.gov (United States)

Luc C. Duchesne; John C. Zasada; Iain. Davidson-Hunt

2001-01-01

With a current output of over $241 million per year, non-timber forest products (NTFPs) contribute significantly to the welfare of rural and First Nations communities in Canada. Maple sap products, wild mushrooms, and wild fruits are the most important NTFPs for consumption both in Canada and abroad. However, because of increased access to international markets by...

Emissions from Combustion of Open Area Sources: Prescribed Forest and Agricultural Burns

Science.gov (United States)

Emissions from wildfires and prescribed forest and agricultural burns generate a variety of emissions that can cause adverse health effects for humans, contribute to climate change, and decrease visibility. Only limited pollutant data are available for these sources, particularly...

National workshop on forest productivity & technology: cooperative research to support a sustainable & competitive future - progress and strategy

Science.gov (United States)

Eric D. Vance

2010-01-01

The Agenda 2020 Program is a partnership among government agencies, the forest products industry, and academia to develop technology capable of enhancing forest productivity, sustaining environmental values, increasing energy efficiency, and improving the economic competitiveness of the United States forest sector. In November 2006, the USDA Forest Service, in...

Water management and productivity in planted forests

Directory of Open Access Journals (Sweden)

J. E. Nettles

2014-09-01

Full Text Available As climate variability endangers water security in many parts of the world, maximizing the carbon balance of plantation forestry is of global importance. High plant water use efficiency is generally associated with lower plant productivity, so an explicit balance in resources is necessary to optimize water yield and tree growth. This balance requires predicting plant water use under different soil, climate, and planting conditions, as well as a mechanism to account for trade-offs in ecosystem services. Several strategies for reducing the water use of forests have been published but there is little research tying these to operational forestry. Using data from silvicultural and biofuel feedstock research in pine plantation ownership in the southeastern USA, proposed water management tools were evaluated against known treatment responses to estimate water yield, forest productivity, and economic outcomes. Ecosystem impacts were considered qualitatively and related to water use metrics. This work is an attempt to measure and compare important variables to make sound decisions about plantations and water use.

Relationships between net primary productivity and stand age for several forest types and their influence on China's carbon balance.

Science.gov (United States)

Wang, Shaoqiang; Zhou, Lei; Chen, Jingming; Ju, Weimin; Feng, Xianfeng; Wu, Weixing

2011-06-01

Affected by natural and anthropogenic disturbances such as forest fires, insect-induced mortality and harvesting, forest stand age plays an important role in determining the distribution of carbon pools and fluxes in a variety of forest ecosystems. An improved understanding of the relationship between net primary productivity (NPP) and stand age (i.e., age-related increase and decline in forest productivity) is essential for the simulation and prediction of the global carbon cycle at annual, decadal, centurial, or even longer temporal scales. In this paper, we developed functions describing the relationship between national mean NPP and stand age using stand age information derived from forest inventory data and NPP simulated by the BEPS (Boreal Ecosystem Productivity Simulator) model in 2001. Due to differences in ecobiophysical characteristics of different forest types, NPP-age equations were developed for five typical forest ecosystems in China (deciduous needleleaf forest (DNF), evergreen needleleaf forest in tropic and subtropical zones (ENF-S), deciduous broadleaf forest (DBF), evergreen broadleaf forest (EBF), and mixed broadleaf forest (MBF)). For DNF, ENF-S, EBF, and MBF, changes in NPP with age were well fitted with a common non-linear function, with R(2) values equal to 0.90, 0.75, 0.66, and 0.67, respectively. In contrast, a second order polynomial was best suitable for simulating the change of NPP for DBF, with an R(2) value of 0.79. The timing and magnitude of the maximum NPP varied with forest types. DNF, EBF, and MBF reached the peak NPP at the age of 54, 40, and 32 years, respectively, while the NPP of ENF-S maximizes at the age of 13 years. The highest NPP of DBF appeared at 122 years. NPP was generally lower in older stands with the exception of DBF, and this particular finding runs counter to the paradigm of age-related decline in forest growth. Evaluation based on measurements of NPP and stand age at the plot-level demonstrates the reliability

Pollen sources in the Bojanów forest complex identified on honeybee pollen load by microscopic analysis

Directory of Open Access Journals (Sweden)

Ernest Stawiarz

2017-11-01

Full Text Available The aim of this study was to determine sources of pollen for the honeybee in the Bojanów forest complex, Nowa Dęba Forest District (southeastern Poland. Sampling of pollen loads from bees extended from the beginning of May until the end of September 2016 and was carried out at 7-day intervals using pollen traps mounted at the entrance of beehives. A total of 73 pollen load samples were collected from the study area. Fifty-nine taxa from 31 plant families were identified in the analyzed material. From 4 to 21 taxa (average 9.5 were recorded in one sample. The pollen of Brassicaceae (“others”, Taraxacum type, Solidago type, and Rumex had the highest frequency in the pollen loads examined. Apart from these four taxa, pollen grains of Rubus type, Poaceae (“others”, Calluna, Fagopyrum, Trifolium repens s. l., Phacelia, Aster type, Melampyrum, Quercus, Cornus, and Veronica were recorded in the dominant pollen group. The forest habitat taxa that provided pollen rewards to honeybees in the Bojanów forest complex were the following: Rubus, Calluna, Prunus, Tilia, Frangula alnus, Pinus, Quercus, Cornus, Robinia pseudoacacia, Salix, and Vaccinium. Apart from forest vegetation, the species from meadows and wastelands adjacent to this forest complex, represented by Taraxacum, Rumex, Plantago, Poaceae, Trifolium repens, and Solidago, proved to be an important source of pollen. The study indicates that forest communities are a valuable source of pollen for pollinating insects from early spring through to late fall.

Amazon soil charcoal: Pyrogenic carbon stock depends of ignition source distance and forest type in Roraima, Brazil.

Science.gov (United States)

da Silva Carvalho, Lidiany C; Fearnside, Philip M; Nascimento, Marcelo T; Barbosa, Reinaldo I

2018-04-18

Pyrogenic carbon (PyC) derived from charcoal particles (paleo + modern) deposited in the soil column has been little studied in the Amazon, and our understanding of the factors that control the spatial and vertical distribution of these materials in the region's forest soils is still unclear. The objective of this study was to test the effect of forest type and distance from the ignition source on the PyC stocks contained in macroscopic particles of soil charcoal (≥2 mm; 1 m depth) dispersed in ecotone forests of the northern Brazilian Amazon. Thirty permanent plots were set up near a site that had been occupied by pre-Columbian and by modern populations until the late 1970s. The sampled plots represent seasonal and ombrophilous forests that occur under different hydro-edaphic restrictions. Our results indicate that the largest PyC stock was spatially dependent on distance to the ignition source ( 50 cm) in seasonal forests was limited by hydro-edaphic impediments that restricted the occurrence of charcoal. These results suggest that PyC stocks derived from macroscopic charcoal particles in the soil of this Brazilian Amazon ecotone region are controlled by the distance from the ignition source of the fire, and that forest types with higher hydro-edaphic restrictions can inhibit formation and accumulation of charcoal. Making use of these distinctions reduces uncertainty and improves our ability to understand the variability of PyC stocks in forests with a history of fire in the Amazon. © 2018 John Wiley & Sons Ltd.

Factors influencing buyers' willingness to offer price premiums for carbon credits sourced from urban forests

Science.gov (United States)

N.C. Poudyal; J.M. Bowker; J.P. Siry

2015-01-01

Marketing carbon offset credits generated by urban forest projects could help cities and local governments achieve their financial self-sufficiency and environmental sustainability goals. Understanding the value of carbon credits sourced from urban forests, and the factors that determine buyers’ willingness to pay a premium for such credits could benefit cities in...

Factors for Microbial Carbon Sources in Organic and Mineral Soils from Eastern United States Deciduous Forests

Energy Technology Data Exchange (ETDEWEB)

Stitt, Caroline R. [Mills College, Oakland, CA (United States)

2013-09-16

Forest soils represent a large portion of global terrestrial carbon; however, which soil carbon sources are used by soil microbes and respired as carbon dioxide (CO2) is not well known. This study will focus on characterizing microbial carbon sources from organic and mineral soils from four eastern United States deciduous forests using a unique radiocarbon (14C) tracer. Results from the dark incubation of organic and mineral soils are heavily influenced by site characteristics when incubated at optimal microbial activity temperature. Sites with considerable differences in temperature, texture, and location differ in carbon source attribution, indicating that site characteristics play a role in soil respiration.

Atmospheric versus biological sources of polycyclic aromatic hydrocarbons (PAHs) in a tropical rain forest environment

International Nuclear Information System (INIS)

Krauss, Martin; Wilcke, Wolfgang; Martius, Christopher; Bandeira, Adelmar G.; Garcia, Marcos V.B.; Amelung, Wulf

2005-01-01

To distinguish between pyrogenic and biological sources of PAHs in a tropical rain forest near Manaus, Brazil, we determined the concentrations of 21 PAHs in leaves, bark, twigs, and stem wood of forest trees, dead wood, mineral topsoil, litter layer, air, and Nasutitermes termite nest compartments. Naphthalene (NAPH) was the most abundant PAH with concentrations of 35 ng m -3 in air (>85% of the Σ21PAHs concentration), up to 1000 μg kg -1 in plants (>90%), 477 μg kg -1 in litter (>90%), 32 μg kg -1 in topsoil (>90%), and 160 μg kg -1 (>55%) in termite nests. In plants, the concentrations of PAHs in general decreased in the order leaves > bark > twigs > stem wood. The concentrations of most low-molecular weight PAHs in leaves and bark were near equilibrium with air, but those of NAPH were up to 50 times higher. Thus, the atmosphere seemed to be the major source of all PAHs in plants except for NAPH. Additionally, phenanthrene (PHEN) had elevated concentrations in bark and twigs of Vismia cayennensis trees (12-60 μg kg -1 ), which might have produced PHEN. In the mineral soil, perylene (PERY) was more abundant than in the litter layer, probably because of in situ biological production. Nasutitermes nests had the highest concentrations of most PAHs in exterior compartments (on average 8 and 15 μg kg -1 compared to -1 in interior parts) and high PERY concentrations in all compartments (12-86 μg kg -1 ), indicating an in situ production of PERY in the nests. Our results demonstrate that the deposition of pyrolytic PAHs from the atmosphere controls the concentrations of most PAHs. However, the occurrence of NAPH, PHEN, and PERY in plants, termite nests, and soils at elevated concentrations supports the assumption of their biological origin. - Evidence of non-pyrolytic, biogenic production of PAHs is provided

76 FR 65097 - National Forest Products Week, 2011

Science.gov (United States)

2011-10-20

... National Forest Products Week, 2011 By the President of the United States of America A Proclamation America... access clean water and air, drive discovery as natural laboratories, and make our communities more... and preservation of these national treasures. Through the America's Great Outdoors Initiative, my...

Conservation value of low-productivity forests measured as the amount and diversity of dead wood and saproxylic beetles.

Science.gov (United States)

Hämäläinen, Aino; Strengbom, Joachim; Ranius, Thomas

2018-06-01

In many managed landscapes, low-productivity land comprises most of the remaining relatively untouched areas, and is often over-represented within protected areas. The relationship between the productivity and conservational value of a site is poorly known; however, it has been hypothesized that biodiversity increases with productivity due to higher resource abundance or heterogeneity, and that the species communities of low-productivity land are a nested subset of communities from more productive land. We tested these hypotheses for dead-wood-dependent beetles by comparing their species richness and composition, as well as the amount and diversity of dead wood, between low-productivity (potential forest growth dead wood, but volume appeared to be a better predictor than diversity for the higher species richness in set-asides. Beetle species composition was similar among stand types, and the assemblages in low-productivity stands were largely subsets of those in high-productivity set-asides. However, 11% of all species and 40% of red-listed species only occurred in high-productivity stands, while no species were unique to low-productivity stands. We conclude that low-productivity forests are less valuable for conservation than high-productivity forest land. Given the generally similar species composition among stand types, a comparable conservational effect could be obtained by setting aside a larger area of low-productivity forest in comparison to the high-productivity. In terms of dead wood volumes, 1.8-3.6 ha of low-productivity forest has the same value as 1 ha of unmanaged high-productivity forest. This figure can be used to estimate the conservation value of low-productivity forests; however, as high-productivity forests harbored some unique species, they are not completely exchangeable. © 2018 The Authors. Ecological Applications published by Wiley Periodicals, Inc. on behalf of Ecological Society of America.

Forest management planning for timber production: a sequential approach

Science.gov (United States)

Krishna P. Rustagi

1978-01-01

Explicit forest management planning for timber production beyond the first few years at any time necessitates use of information which can best be described as suspect. The two-step approach outlined here concentrates on the planning strategy over the next few years without losing sight of the long-run productivity. Frequent updating of the long-range and short-range...

CO{sub 2}-EQ emissions of forest chip production in Finland in 2020

Energy Technology Data Exchange (ETDEWEB)

Kariniemi, Arto; Kaerhae, Kalle (Metsaeteho Oy, Helsinki (Finland)), e-mail: arto.kariniemi@metsateho.fi

2010-07-15

The research carried out by Metsaeteho Oy calculated what would be the total fuel consumption and CO{sub 2}-eq emissions of forest chip production if the use of forest chips is 24 TWh in 2020 in Finland in accordance with the target set of Long-term Climate and Energy Strategy. CO{sub 2}-eq emissions were determined with Metsaeteho Oy's updated Emissions Calculation Model. If the production and consumption of forest chips in Finland are 24 TWh in 2020, then the total CO{sub 2}-eq emissions would be around 230,000 tonnes. The volume of diesel consumption was 73 million litres and petrol 1.7 million litres. Electric rail transportation and chipping at the mill site consumed 17 GWh of electricity. The supply chain with the lowest CO{sub 2}-eq emissions was logging residues comminuted at plant. Conversely, the highest CO{sub 2}-eq emissions came from stump wood when operating with terminal comminuting. Less than 3% of the energy content was consumed during the forest chip production. Energy input/output ratio in the total volume was 0.026 MWh/MWh which varied from 0.019 to 0.038 between the supply systems researched. Hence, forest chip production gave a net of some 97% of the energy content delivered at the plant

Availability and production costs of forest biomass as a feedstock for bio ethanol production; Disponibilidad y costos de produccion de biomasa forestal como materia prima para la produccion de bioetanol

Energy Technology Data Exchange (ETDEWEB)

Perez-Verdin, G.; Navar-Chaidez, J. J.; Grebner, D. L.; Soto-Alvarez, C. E.

2012-07-01

Forest biomass is a viable alternative to produce ethanol because is abundant, clean, renewable, and can help mitigate greenhouse gas emissions. In this study, a methodology to estimate availability and production costs of forest biomass in forest pines of the state of Durango, Mexico is presented. Forest periodic inventory, forest management plans, and sawmill information were used to estimate forest residues and mill residues, respectively. Since a market for bio ethanol from forest biomass is still not well defined, Monte Carlo simulations were conducted to estimate procurement, transportation, and stumpage costs. Results show that about 322,000 tons can be used to produce up to 38 million of liters of ethanol per year. Of that amount, 66% is forest residues and the rest mill residues. Monte Carlo simulations indicated that the average cost of forest residues is US $23.8 per metric ton (US $0.20 L{sup -}1 ethanol) while the cost for mill residues is US $22.6 per metric ton (US $0.19 L{sup -}1 ethanol). The more important factors in the sensitivity analysis were stumpage costs, technological efficiency, and transportation. The study concluded that in the short term bio ethanol development have to compete with products that use similar raw material such as the pulp, paper and wood-based panels industries and reduce transportation costs. Alternatively, it is recommended the development of integrated bio refineries and the use of more efficient transportation means. (Author) 37 refs.

Gender implications of forest product value chains in the Congo basin

NARCIS (Netherlands)

Ingram, V.; Schure, J.M.; Tieguhong, J.C.; Ndoye, O.; Awono, A.; Iponga, D.M.

2014-01-01

Activities and roles in value chains of forest products in the Congo Basin are highly gendered, varying with the product's characteristics, the segment of the chain and customary regulations and norms. High-value products are primarily male-harvested when customary rules govern tenure and access,

A Market-oriented Approach To Maximizing Product Benefits: Cases in U.S. Forest Products Industries

Science.gov (United States)

Vijay S. Reddy; Robert J. Bush; Ronen Roudik

1996-01-01

Conjoint analysis, a decompositional customer preference modelling technique, has seen little application to forest products. However, the technique provides useful information for marketing decisions by quantifying consumer preference functions for multiattribute product alternatives. The results of a conjoint analysis include the contribution of each attribute and...

Does species richness affect fine root biomass and production in young forest plantations?

Science.gov (United States)

Domisch, Timo; Finér, Leena; Dawud, Seid Muhie; Vesterdal, Lars; Raulund-Rasmussen, Karsten

2015-02-01

Tree species diversity has been reported to increase forest ecosystem above-ground biomass and productivity, but little is known about below-ground biomass and production in diverse mixed forests compared to single-species forests. For testing whether species richness increases below-ground biomass and production and thus complementarity between forest tree species in young stands, we determined fine root biomass and production of trees and ground vegetation in two experimental plantations representing gradients in tree species richness. Additionally, we measured tree fine root length and determined species composition from fine root biomass samples with the near-infrared reflectance spectroscopy method. We did not observe higher biomass or production in mixed stands compared to monocultures. Neither did we observe any differences in tree root length or fine root turnover. One reason for this could be that these stands were still young, and canopy closure had not always taken place, i.e. a situation where above- or below-ground competition did not yet exist. Another reason could be that the rooting traits of the tree species did not differ sufficiently to support niche differentiation. Our results suggested that functional group identity (i.e. conifers vs. broadleaved species) can be more important for below-ground biomass and production than the species richness itself, as conifers seemed to be more competitive in colonising the soil volume, compared to broadleaved species.

Disturbance and net ecosystem production across three climatically distinct forest landscapes

Science.gov (United States)

John L. Campbell; O.J. Sun; B.E. Law

2004-01-01

Biometric techniques were used to measure net ecosystem production (NEP) across three climatically distinct forest chronosequences in Oregon. NEP was highly negative immediately following stand-replacing disturbance in all forests and recovered to positive values by 10, 20, and 30 years of age for the mild mesic Coast Range, mesic West Cascades, and semi-arid East...

Interpreting forest and grassland biome productivity utilizing nested scales of image resolution and biogeographical analysis

Science.gov (United States)

Iverson, Louis R.; Cook, Elizabeth A.; Graham, Robin L.; Olson, Jerry S.; Frank, Thomas; Ke, Ying; Treworgy, Colin; Risser, Paul G.

1987-01-01

This report summarizes progress made in our investigation of forest productivity assessment using TM and other biogeographical data during the third six-month period of the grant. Data acquisition and methodology hurdles are largely complete. Four study areas for which the appropriate TM and ancillary data were available are currently being intensively analyzed. Significant relationships have been found on a site by site basis to suggest that forest productivity can be qualitatively assessed using TM band values and site characteristics. Perhaps the most promising results relate TM unsupervised classes to forest productivity, with enhancement from elevation data. During the final phases of the research, multi-temporal and regional comparisons of results will be addressed, as well as the predictability of forest productivity patterns over a large region using TM data and/or TM nested within AVHRR data.

Forest Soil Productivity on the Southern Long-Term Soil Productivity Sites at Age 5

Science.gov (United States)

D. Andrew Scott; Allan E. Tiarks; Felipe G. Sanchez; Michael Elliott-Smith; Rick Stagg

2004-01-01

Forest management operations have the potential to reduce soil productivity through organic matter and nutrient removal and soil compaction. We measured pine volume, bulk density, and soil and foliar nitrogen and phosphorus at age 5 on the 13 southern Long-Term Soil Productivity study sites. The treatments were organic matter removal [bole only (BO), whole tree (WT),...

Shifts in biomass and productivity for a subtropical dry forest in response to simulated elevated hurricane disturbances

International Nuclear Information System (INIS)

Holm, Jennifer A.; Van Bloem, Skip J.; Larocque, Guy R.; Shugart, Herman H.

2017-01-01

Caribbean tropical forests are subject to hurricane disturbances of great variability. In addition to natural storm incongruity, climate change can alter storm formation, duration, frequency, and intensity. This model -based investigation assessed the impacts of multiple storms of different intensities and occurrence frequencies on the long-term dynamics of subtropical dry forests in Puerto Rico. Using the previously validated individual-based gap model ZELIG-TROP, we developed a new hurricane damage routine and parameterized it with site- and species-specific hurricane effects. A baseline case with the reconstructed historical hurricane regime represented the control condition. Ten treatment cases, reflecting plausible shifts in hurricane regimes, manipulated both hurricane return time (i.e. frequency) and hurricane intensity. The treatment-related change in carbon storage and fluxes were reported as changes in aboveground forest biomass (AGB), net primary productivity (NPP), and in the aboveground carbon partitioning components, or annual carbon accumulation (ACA). Increasing the frequency of hurricanes decreased aboveground biomass by between 5% and 39%, and increased NPP between 32% and 50%. Decadal-scale biomass fluctuations were damped relative to the control. In contrast, increasing hurricane intensity did not create a large shift in the long-term average forest structure, NPP, or ACA from that of historical hurricane regimes, but produced large fluctuations in biomass. Decreasing both the hurricane intensity and frequency by 50% produced the highest values of biomass and NPP. For the control scenario and with increased hurricane intensity, ACA was negative, which indicated that the aboveground forest components acted as a carbon source. However, with an increase in the frequency of storms or decreased storms, the total ACA was positive due to shifts in leaf production, annual litterfall, and coarse woody debris inputs, indicating a carbon sink into the

Database Overlap vs. Complementary Coverage in Forestry and Forest Products: Factors in Database Acquisition.

Science.gov (United States)

Hoover, Ryan E.

This study examines (1) subject content, (2) file size, (3) types of documents indexed, (4) range of years spanned, and (5) level of indexing and abstracting in five databases which collectively provide extensive coverage of the forestry and forest products industries: AGRICOLA, CAB ABSTRACTS, FOREST PRODUCTS (AIDS), PAPERCHEM, and PIRA. The…

The effects of processing non-timber forest products and trade partnerships on people's well-being and forest conservation in Amazonian societies.

Directory of Open Access Journals (Sweden)

Carla Morsello

Full Text Available This study evaluated whether processing non-timber forest products (NTFPs and establishing trade partnerships between forest communities and companies enhance the outcomes of NTFP commercialization. In particular, we evaluated whether product processing, partnerships, or their combination was associated with a number of outcomes related to the well-being of forest inhabitants and forest conservation. We based our analyses on ethnographic and quantitative data (i.e., survey and systematic observations gathered at seven communities from five societies of the Brazilian and Bolivian Amazon. Our results indicated that product processing and partnerships do not represent a silver bullet able to improve the results of NTFP commercialization in terms of well-being and conservation indicators. Compared with cases without interventions, households adopting partnerships but not product processing were most often associated with improved economic proxies of well-being (total income, NTFP income, food consumption and gender equality in income. In comparison, the combination of product processing and partnerships was associated with similar outcomes. Unexpectedly, product processing alone was associated with negative outcomes in the economic indicators of well-being. All of the investigated strategies were associated with less time spent in social and cultural activities. With respect to forest conservation, the strategies that included a partnership with or without processing produced similar results: while household deforestation tended to decrease, the hunting impact increased. Processing alone was also associated with higher levels of hunting, though it did not reduce deforestation. Our results indicate that establishing partnerships may enhance the outcomes of NTFP trade in terms of the financial outcomes of local communities, but practitioners need to use caution when adopting the processing strategy and they need to evaluate potential negative results

The effects of processing non-timber forest products and trade partnerships on people's well-being and forest conservation in Amazonian societies.

Science.gov (United States)

Morsello, Carla; Ruiz-Mallén, Isabel; Diaz, Maria Dolores Montoya; Reyes-García, Victoria

2012-01-01

This study evaluated whether processing non-timber forest products (NTFPs) and establishing trade partnerships between forest communities and companies enhance the outcomes of NTFP commercialization. In particular, we evaluated whether product processing, partnerships, or their combination was associated with a number of outcomes related to the well-being of forest inhabitants and forest conservation. We based our analyses on ethnographic and quantitative data (i.e., survey and systematic observations) gathered at seven communities from five societies of the Brazilian and Bolivian Amazon. Our results indicated that product processing and partnerships do not represent a silver bullet able to improve the results of NTFP commercialization in terms of well-being and conservation indicators. Compared with cases without interventions, households adopting partnerships but not product processing were most often associated with improved economic proxies of well-being (total income, NTFP income, food consumption and gender equality in income). In comparison, the combination of product processing and partnerships was associated with similar outcomes. Unexpectedly, product processing alone was associated with negative outcomes in the economic indicators of well-being. All of the investigated strategies were associated with less time spent in social and cultural activities. With respect to forest conservation, the strategies that included a partnership with or without processing produced similar results: while household deforestation tended to decrease, the hunting impact increased. Processing alone was also associated with higher levels of hunting, though it did not reduce deforestation. Our results indicate that establishing partnerships may enhance the outcomes of NTFP trade in terms of the financial outcomes of local communities, but practitioners need to use caution when adopting the processing strategy and they need to evaluate potential negative results for indicators of

The Effects of Processing Non-Timber Forest Products and Trade Partnerships on People's Well-Being and Forest Conservation in Amazonian Societies

Science.gov (United States)

Morsello, Carla; Ruiz-Mallén, Isabel; Diaz, Maria Dolores Montoya; Reyes-García, Victoria

2012-01-01

This study evaluated whether processing non-timber forest products (NTFPs) and establishing trade partnerships between forest communities and companies enhance the outcomes of NTFP commercialization. In particular, we evaluated whether product processing, partnerships, or their combination was associated with a number of outcomes related to the well-being of forest inhabitants and forest conservation. We based our analyses on ethnographic and quantitative data (i.e., survey and systematic observations) gathered at seven communities from five societies of the Brazilian and Bolivian Amazon. Our results indicated that product processing and partnerships do not represent a silver bullet able to improve the results of NTFP commercialization in terms of well-being and conservation indicators. Compared with cases without interventions, households adopting partnerships but not product processing were most often associated with improved economic proxies of well-being (total income, NTFP income, food consumption and gender equality in income). In comparison, the combination of product processing and partnerships was associated with similar outcomes. Unexpectedly, product processing alone was associated with negative outcomes in the economic indicators of well-being. All of the investigated strategies were associated with less time spent in social and cultural activities. With respect to forest conservation, the strategies that included a partnership with or without processing produced similar results: while household deforestation tended to decrease, the hunting impact increased. Processing alone was also associated with higher levels of hunting, though it did not reduce deforestation. Our results indicate that establishing partnerships may enhance the outcomes of NTFP trade in terms of the financial outcomes of local communities, but practitioners need to use caution when adopting the processing strategy and they need to evaluate potential negative results for indicators of

Tropical forests are a net carbon source based on aboveground measurements of gain and loss

Science.gov (United States)

Baccini, A.; Walker, W.; Carvalho, L.; Farina, M.; Sulla-Menashe, D.; Houghton, R. A.

2017-10-01

The carbon balance of tropical ecosystems remains uncertain, with top-down atmospheric studies suggesting an overall sink and bottom-up ecological approaches indicating a modest net source. Here we use 12 years (2003 to 2014) of MODIS pantropical satellite data to quantify net annual changes in the aboveground carbon density of tropical woody live vegetation, providing direct, measurement-based evidence that the world’s tropical forests are a net carbon source of 425.2 ± 92.0 teragrams of carbon per year (Tg C year-1). This net release of carbon consists of losses of 861.7 ± 80.2 Tg C year-1 and gains of 436.5 ± 31.0 Tg C year-1. Gains result from forest growth; losses result from deforestation and from reductions in carbon density within standing forests (degradation or disturbance), with the latter accounting for 68.9% of overall losses.

MEASURING THE INFLUENCE OF THE J-CURVE EFFECT ON TRADE IN ROMANIAN FOREST PRODUCTS

Directory of Open Access Journals (Sweden)

Gabriela TUTUEANU

2015-08-01

Full Text Available This paper examines the dynamic effect of the Romanian exchange rate  indices on bilateral trade of Romanian forest products namely fibreboard, particle   board and pulp for paper. Special attention is given to investigate the J-curve hypothesis: whether the trade  balance  for   Romanian   forest   products benefits   from a decline in the  value  of  Romanian Leu (RON. We adopted the autoregressive distributed lag (ARDL approach   to cointegration to estimate the annual bilateral trade data of Romanian forest products  from  1991 to  2013 with various  countries  in the  world. We found  no evidence  of the J-curve  phenomenon for  the  trade in Romanian forest products. The  long-run   analysis   showed the exchange rate  to  be insignificant  in  influencing   the  trade   balance  of  Romanian forest products. This  implies  that  there  are  no changes  in the  trade   balance  for fibreboard, particle board and pulp for paper trade, regardless of whether the Romanian   exchange rate depreciates or appreciates. However, income variables were found to be important factors in determining Romanian trade, only in pulp for paper products.

Interaction between Rural People’s Basic Needs and Forest Products: A Case Study of the Katha District of Myanmar

Directory of Open Access Journals (Sweden)

Zar Chi Hlaing

2017-01-01

Full Text Available The understanding of interaction between rural people and forest products is one of the challenges faced while balancing forest product utilization with forest conservation in Myanmar. This study aims to contribute an effort to such challenges by analyzing the interaction of rural households with forest products in Myanmar. Data were collected using face-to-face questionnaire interviews with 218 households and conducting a rapid tree inventory across 132 circular random plots in selected rural communities around four townships of the Katha District. The empirical results indicate that the 95% of rural households were entirely dependent on forest products. The survey documented 13 main forest products and 54 tree species, which were primarily used for household consumption. Low-income households compared with medium- and high-income households with low educational level (p<0.05 and a small agricultural land area (p<0.05 were found to be more forest-dependent households. Illegal logging, mining, fuel-wood collection, slash-and-burn agriculture, and the establishment of forest plantations were reported as the main causes of forest products depletion. Findings from this study, although at a microlevel, can be used by the Myanmar Forestry Department as baseline information to improve community-based forest management activities.

Nanotechnology for the Forest Products Industry Vision and Technology Roadmap

Energy Technology Data Exchange (ETDEWEB)

Atalla, Rajai [USDA Forest Service, Washington, DC (United States); Beecher, James [USDA Forest Service, Washington, DC (United States); Caron, Robert [Technical Association of the Pulp and Paper Industry, Peachtree Corners, GA (United States); Catchmark, Jeffrey [Pennsylvania State Univ., State College, PA (United States); Deng, Yulin [Georgia Inst. of Technology, Atlanta, GA (United States); Glasser, Wolfgang [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Gray, Derek [McGill Univ., Montreal, QC (Canada); Haigler, Candace [North Carolina State Univ., Raleigh, NC (United States); Jones, Philip [Imerys, Paris (France); Joyce, Margaret [Western Michigan Univ., Kalamazoo MI (United States); Kohlman, Jane [USDA Forest Service, Washington, DC (United States); Koukoulas, Alexander [Technical Association of the Pulp and Paper Industry, Peachtree Corners, GA (United States); Lancaster, Peter [Weyerhaeuser Company, Longview, WA (United States); Perine, Lori [American Forest and Paper Association, Washington, DC (United States); Rodriguez, Augusto [Georgia-Pacific Corporation, Atlanta, GA (United States); Ragauskas, Arthur [Georgia Inst. of Technology, Atlanta, GA (United States); Wegner, Theodore [USDA Forest Service, Washington, DC (United States); Zhu, Junyong [USDA Forest Service, Washington, DC (United States)

2005-03-01

A roadmap for Nanotechnology in the Forest Products Industries has been developed under the umbrella of the Agenda 2020 program overseen by the CTO committee. It is expected that the use of new analytical techniques and methodologies will allow us to understand the complex nature of wood based materials and allow the dramatically enhanced use of the major strategic asset the US has in renewable, recyclable resources based on its well managed Forests.

Logging disturbance shifts net primary productivity and its allocation in Bornean tropical forests.

Science.gov (United States)

Riutta, Terhi; Malhi, Yadvinder; Kho, Lip Khoon; Marthews, Toby R; Huaraca Huasco, Walter; Khoo, MinSheng; Tan, Sylvester; Turner, Edgar; Reynolds, Glen; Both, Sabine; Burslem, David F R P; Teh, Yit Arn; Vairappan, Charles S; Majalap, Noreen; Ewers, Robert M

2018-01-24

Tropical forests play a major role in the carbon cycle of the terrestrial biosphere. Recent field studies have provided detailed descriptions of the carbon cycle of mature tropical forests, but logged or secondary forests have received much less attention. Here, we report the first measures of total net primary productivity (NPP) and its allocation along a disturbance gradient from old-growth forests to moderately and heavily logged forests in Malaysian Borneo. We measured the main NPP components (woody, fine root and canopy NPP) in old-growth (n = 6) and logged (n = 5) 1 ha forest plots. Overall, the total NPP did not differ between old-growth and logged forest (13.5 ± 0.5 and 15.7 ± 1.5 Mg C ha -1  year -1 respectively). However, logged forests allocated significantly higher fraction into woody NPP at the expense of the canopy NPP (42% and 48% into woody and canopy NPP, respectively, in old-growth forest vs 66% and 23% in logged forest). When controlling for local stand structure, NPP in logged forest stands was 41% higher, and woody NPP was 150% higher than in old-growth stands with similar basal area, but this was offset by structure effects (higher gap frequency and absence of large trees in logged forest). This pattern was not driven by species turnover: the average woody NPP of all species groups within logged forest (pioneers, nonpioneers, species unique to logged plots and species shared with old-growth plots) was similar. Hence, below a threshold of very heavy disturbance, logged forests can exhibit higher NPP and higher allocation to wood; such shifts in carbon cycling persist for decades after the logging event. Given that the majority of tropical forest biome has experienced some degree of logging, our results demonstrate that logging can cause substantial shifts in carbon production and allocation in tropical forests. © 2018 John Wiley & Sons Ltd.

Assessing Bioenergy Harvest Risks: Geospatially Explicit Tools for Maintaining Soil Productivity in Western US Forests

Directory of Open Access Journals (Sweden)

Deborah Page-Dumroese

2011-09-01

Full Text Available Biomass harvesting for energy production and forest health can impact the soil resource by altering inherent chemical, physical and biological properties. These impacts raise concern about damaging sensitive forest soils, even with the prospect of maintaining vigorous forest growth through biomass harvesting operations. Current forest biomass harvesting research concurs that harvest impacts to the soil resource are region- and site-specific, although generalized knowledge from decades of research can be incorporated into management activities. Based upon the most current forest harvesting research, we compiled information on harvest activities that decrease, maintain or increase soil-site productivity. We then developed a soil chemical and physical property risk assessment within a geographic information system for a timber producing region within the Northern Rocky Mountain ecoregion. Digital soil and geology databases were used to construct geospatially explicit best management practices to maintain or enhance soil-site productivity. The proposed risk assessments could aid in identifying resilient soils for forest land managers considering biomass operations, policy makers contemplating expansion of biomass harvesting and investors deliberating where to locate bioenergy conversion facilities.

The world wide web: an emerging technology for marketing special forest products (poster abstract)

Science.gov (United States)

A.L. Hammett; Shelby Jones; Philip A. Araman

1999-01-01

Interest by forest landowners and agriculturist in Special Forest Products (SFPs) is increasing rapidly. At present there are numerous efforts to increase awareness of these products and the market potential. However, there is a shortage of information available and there are few means effective in disseminating the information necessary for the sustainable management...

Biodiversity: role of non-timber forest products in food security ...

African Journals Online (AJOL)

Non-timber forest products (NTFPS) are biological materials from the ecosystem which range from plants, parts of plants, fungi, animals and animal products that are consumed either as food, condiments, spices or medicine. NTFPS have been identified to play an important role in providing primary health and nutritional ...

Estimation of Forest Products Demand as an Intermediary Function

OpenAIRE

Andersson, A.E.

1984-01-01

In this article the problem of demand forecasting is discussed from a quantitative point of view. It is shown that an intermediate demand approach is preferable to the common final demand procedures of forest product demand studies.

Regional and forest-level estimates of carbon stored in harvested wood products from the United States Forest Service Northern Region, 1906-2010

Science.gov (United States)

N. Anderson; J. Young; K. Stockmann; K. Skog; S. Healey; D. Loeffler; J.G. Jones; J. Morrison

2013-01-01

Global forests capture and store significant amounts of CO2 through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS) and other agencies are interested in accurately accounting for carbon flux associated with harvested wood...

Rural Income and Forest Reliance in Highland Guatemala

Science.gov (United States)

Prado Córdova, José Pablo; Wunder, Sven; Smith-Hall, Carsten; Börner, Jan

2013-05-01

This paper estimates rural household-level forest reliance in the western highlands of Guatemala using quantitative methods. Data were generated by the way of an in-depth household income survey, repeated quarterly between November 2005 and November 2006, in 11 villages ( n = 149 randomly selected households). The main sources of income proved to be small-scale agriculture (53 % of total household income), wages (19 %) and environmental resources (14 %). The latter came primarily from forests (11 % on average). In the poorest quintile the forest income share was as high as 28 %. All households harvest and consume environmental products. In absolute terms, environmental income in the top quintile was 24 times higher than in the lowest. Timber and poles, seeds, firewood and leaf litter were the most important forest products. Households can be described as `regular subsistence users': the share of subsistence income is high, with correspondingly weak integration into regional markets. Agricultural systems furthermore use important inputs from surrounding forests, although forests and agricultural uses compete in household specialization strategies. We find the main household determinants of forest income to be household size, education and asset values, as well as closeness to markets and agricultural productivity. Understanding these common but spatially differentiated patterns of environmental reliance may inform policies aimed at improving livelihoods and conserving forests.

Earlier Snowmelt Changes the Ratio Between Early and Late Season Forest Productivity

Science.gov (United States)

Knowles, J. F.; Molotch, N. P.; Trujillo, E.; Litvak, M. E.

2017-12-01

Future projections of declining snowpack and increasing potential evaporation associated with climate warming are predicted to advance the timing of snowmelt in mountain ecosystems globally. This scenario has direct implications for snowmelt-driven forest productivity, but the net effect of temporally shifting moisture dynamics is unknown with respect to the annual carbon balance. Accordingly, this study uses both satellite- and tower-based observations to document the forest productivity response to snowpack and potential evaporation variability between 1989 and 2012 throughout the southern Rocky Mountain ecoregion, USA. These results show that a combination of low snow accumulation and record high potential evaporation in 2012 resulted in the 34-year minimum ecosystem productivity that could be indicative of future conditions. Moreover, early and late season productivity were significantly and inversely related, suggesting that future shifts toward earlier or reduced snowmelt could increase late-season moisture stress to vegetation and thus restrict productivity despite a longer growing season. This relationship was further subject to modification by summer precipitation, and the controls on the early/late season productivity ratio are explored within the context of ecosystem carbon storage in the future. Any perturbation to the carbon cycle at this scale represents a potential feedback to climate change since snow-covered forests represent an important global carbon sink.

Carbon budget of Ontario's managed forests and harvested wood products, 2001–2100

Science.gov (United States)

Jiaxin Chen; Stephen J. Colombo; Michael T. Ter-Mikaelian; Linda S. Heath

2010-01-01

Forest and harvested wood products (HWP) carbon (C) stocks between 2001 and 2100 for Ontario's managed forests were projected using FORCARB-ON, an adaptation of the U.S. national forest C budget model known as FORCARB2. A fire disturbance module was introduced to FORCARB-ON to simulate the effects of wildfire on C, and some of the model's C pools were re-...

Nontraditional Use of Biomass at Certified Forest Management Units: Forest Biomass for Energy Production and Carbon Emissions Reduction in Indonesia

Directory of Open Access Journals (Sweden)

Asep S. Suntana

2012-01-01

Full Text Available Biomass conversion technologies that produce energy and reduce carbon emissions have become more feasible to develop. This paper analyzes the potential of converting biomass into biomethanol at forest management units experiencing three forest management practices (community-based forest management (CBFM, plantation forest (PF, and natural production forest (NPF. Dry aboveground biomass collected varied considerably: 0.26–2.16 Mg/ha/year (CBFM, 8.08–8.35 Mg/ha/year (NPF, and 36.48–63.55 Mg/ha/year (PF. If 5% of the biomass was shifted to produce biomethanol for electricity production, the NPF and PF could provide continuous power to 138 and 2,762 households, respectively. Dedicating 5% of the biomass was not a viable option from one CBFM unit. However, if all biomasses were converted, the CBFM could provide electricity to 19–27 households. If 100% biomass from two selected PF was dedicated to biomethanol production: (1 52,200–72,600 households could be provided electricity for one year; (2 142–285% of the electricity demand in Jambi province could be satisfied; (3 all gasoline consumed in Jambi, in 2009, would be replaced. The net carbon emissions avoided could vary from 323 to 8,503 Mg when biomethanol was substituted for the natural gas methanol in fuel cells and from 294 to 7,730 Mg when it was used as a gasoline substitute.

Power production from radioactively contaminated biomass and forest litter in Belarus - Phase 1b

DEFF Research Database (Denmark)

Roed, Jørn; Andersson, Kasper Grann; Fogh, C.L.

2000-01-01

The Chernobyl accident has led to radioactive contamination of vast Belarussian forest areas. A total scheme for remediation of contaminated forest areas and utilisation of the removed biomass in safe energy production is being investigated in aBelarussian-American-Danish collaborative project....... Here the total radiological impact of the scheme is considered. This means that not only the dose reductive effect of the forest decontamination is taken into account, but also the possible adverse healtheffects in connection with the much needed bio-energy production. This report presents the results...

Marketing of specialty forest products in the southeast: opportunities for research, education and outreach (poster abstract)

Science.gov (United States)

A.L. Hammett; J.L. Chamberlain

1999-01-01

The specialty forest products sector in the Southeast is growing rapidly - perhaps faster than in other sections of the country. In 1993, the state of Virginia exported almost 10 percent of the national total of wild harvested ginseng. On a yearly basis, the value of the specialty forest products extracted from Virginia?s forests has been estimated at $35 million. The...

Accuracy Assessment of Satellite Derived Forest Cover Products in South and Southeast Asia

Science.gov (United States)

Gilani, H.; Xu, X.; Jain, A. K.

2017-12-01

South and Southeast Asia (SSEA) region occupies 16 % of worlds land area. It is home to over 50% of the world's population. The SSEA's countries are experiencing significant land-use and land-cover changes (LULCCs), primarily in agriculture, forest, and urban land. For this study, we compiled four existing global forest cover maps for year 2010 by Gong et al.(2015), Hansen et al. (2013), Sexton et al.(2013) and Shimada et al. (2014), which were all medium resolution (≤30 m) products based on Landsat and/or PALSAR satellite images. To evaluate the accuracy of these forest products, we used three types of information: (1) ground measurements, (2) high resolution satellite images and (3) forest cover maps produced at the national scale. The stratified random sampling technique was used to select a set of validation data points from the ground and high-resolution satellite images. Then the confusion matrix method was used to assess and rank the accuracy of the forest cover products for the entire SSEA region. We analyzed the spatial consistency of different forest cover maps, and further evaluated the consistency with terrain characteristics. Our study suggests that global forest cover mapping algorithms are trained and tested using limited ground measurement data. We found significant uncertainties in mountainous areas due to the topographical shadow effect and the dense tree canopies effects. The findings of this study will facilitate to improve our understanding of the forest cover dynamics and their impacts on the quantities and pathways of terrestrial carbon and nitrogen fluxes. Gong, P., et al. (2012). "Finer resolution observation and monitoring of global land cover: first mapping results with Landsat TM and ETM+ data." International Journal of Remote Sensing 34(7): 2607-2654. Hansen, M. C., et al. (2013). "High-Resolution Global Maps of 21st-Century Forest Cover Change." Science 342(6160): 850-853. Sexton, J. O., et al. (2013). "Global, 30-m resolution

Analysis of forest product trade relationships between Turkey and ...

African Journals Online (AJOL)

USER

2010-04-19

Apr 19, 2010 ... African Journal of Biotechnology Vol. 9(16), pp. ... Full Length Research Paper. Analysis of ... academic attention in the economics literature. The .... In this study, the forest products industry in Turkey and the EU countries have ...

Recent activities in flame retardancy of wood-plastic composites at the Forest Products Laboratory

Science.gov (United States)

Robert H. White; Nicole M. Stark; Nadir Ayrilmis

2011-01-01

For a variety of reasons, wood-plastic composite (WPC) products are widely available for some building applications. In applications such as outdoor decking, WPCs have gained a significant share of the market. As an option to improve the efficient use of wood fiber, the USDA Forest Service, Forest Products Laboratory (FPL), has an extensive research program on WPCs....

Innovation in the forest products industry: an analysis of companies in Alaska and Oregon.

Science.gov (United States)

Abra Hovgaard; Eric Hansen; Joseph. Roos

2005-01-01

Because there is a lack of innovation research in the forest products industry and innovative activities in the industry are not well documented, this study attempted to fill that void. The objectives of this study were to understand the process and definition of innovation in the forest products industry, identify the constraints on innovative activities, identify...

Normalizing Landsat and ASTER Data Using MODIS Data Products for Forest Change Detection

Science.gov (United States)

Gao, Feng; Masek, Jeffrey G.; Wolfe, Robert E.; Tan, Bin

2010-01-01

Monitoring forest cover and its changes are a major application for optical remote sensing. In this paper, we present an approach to integrate Landsat, ASTER and MODIS data for forest change detection. Moderate resolution (10-100m) images (e.g. Landsat and ASTER) acquired from different seasons and times are normalized to one "standard" date using MODIS data products as reference. The normalized data are then used to compute forest disturbance index for forest change detection. Comparing to the results from original data, forest disturbance index from the normalized images is more consistent spatially and temporally. This work demonstrates an effective approach for mapping forest change over a large area from multiple moderate resolution sensors on various acquisition dates.

Production and reduction of nitrous oxide in agricultural and forest soils.

Science.gov (United States)

Yu, K; Chen, G; Struwe, S; Kjøller, A

2000-06-01

A soil-water slurry experiment was conducted to study the potentials of N2O production and reduction in denitrification of agricultural and beech forest soils in Denmark. The effects of nitrate and ammonium additions on denitrification were also investigated. The forest soil showed a higher denitrification potential than the agricultural soil. However, N2O reduction potential of the agricultural soil was higher than the beech forest soil, shown by the ratio of N2O/N2 approximately 0.11 and 3.65 in the agricultural and the beech forest soils, respectively. Both nitrate and ammonium additions stimulated the N2O production in the two soils, but reduced the N2O reduction rates in the agricultural soil slurries. In contrast to the effect on the agricultural soil, nitrate reduced the N2O reduction rate in the beech forest soil, while ammonium showed a stimulating effect on the N2O reduction activity. After one week incubation, all of the N2O produced was reduced to N2 in the agricultural soil when nitrate was still present. Nitrous oxide reduction in the beech forest soil occurred only when nitrate almost disappeared. The different nitrate inhibitory effect on the N2O reduction activity in the two soils was due to the difference in soil pH. Inhibition of nitrate on N2O reduction was significant under acidic condition. Consequently, soil could serve as a sink of atmospheric N2O under the conditions of anaerobic, pH near neutral and low nitrate content.

Assessing impacts of intensified biomass production and biodiversity protection on ecosystem services provided by European forests

NARCIS (Netherlands)

Verkerk, P.J.; Mavsar, R.; Giergiczny, M.; Lindner, M.; Edwards, D.; Schelhaas, M.J.

2014-01-01

To develop viable strategies for intensifying the use of forest biomass and for increasing forest protection, impacts on ecosystem services need to be assessed. We investigated the biophysical and economic impacts of increased forest biomass production and biodiversity protection on forest ecosystem

An exploratory assessment of the attitudes of Chinese wood products manufacturers towards forest certification.

Science.gov (United States)

Chen, Juan; Innes, John L; Kozak, Robert A

2011-11-01

Interviews with Chinese forest products manufacturers were conducted to explore their attitudes towards forest certification and related issues. Participants comprised owners, CEOs, and managers in 20 Chinese wood products companies, including producers of furniture, doors, flooring, and various engineered wood products. The interviews were used to analyze the extent to which participants were considering adopting forest certification and what might motivate such a decision. This was done by assessing their awareness and knowledge of certification. The results indicated that participants' understanding of forest certification was extremely low, despite major efforts in China to raise awareness of the issue. Potential economic benefits were the most frequently cited reason to adopt certification, including gaining or maintaining competitive advantage over their industry counterparts, improved access to both domestic and export markets, better customer recognition, and enhanced corporate responsibility practices. Some interviewees (3 out of 20) considered that certification would become a mandatory requirement or industry standard, and that this would be the only viable motivation for certification given that the financial benefits were potentially limited. According to the participants, the main differences between certified and uncertified wood products operations related to improved market access and public image. Interviewees felt that cooperation between and support from governments and the forest industry would enable the enhanced awareness of certification amongst manufacturers and the general public. This, in turn, could serve to stimulate demand for certified products. Copyright © 2011 Elsevier Ltd. All rights reserved.

The Four Corners timber harvest and forest products industry, 2007

Science.gov (United States)

Steven W. Hayes; Todd A. Morgan; Erik C. Berg; Jean M. Daniels; Mike Thompson

2012-01-01

This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2007, describes the composition and operations of the region's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as...

Enhancement of understory productivity by asynchronous phenology with overstory competitors in a temperate deciduous forest.

Science.gov (United States)

Jolly, William M; Nemani, Ramakrishna; Running, Steven W

2004-09-01

Some saplings and shrubs growing in the understory of temperate deciduous forests extend their periods of leaf display beyond that of the overstory, resulting in periods when understory radiation, and hence productivity, are not limited by the overstory canopy. To assess the importance of the duration of leaf display on the productivity of understory and overstory trees of deciduous forests in the north eastern United States, we applied the simulation model, BIOME-BGC with climate data for Hubbard Brook Experimental Forest, New Hampshire, USA and mean ecophysiological data for species of deciduous, temperate forests. Extension of the overstory leaf display period increased overstory leaf area index (LAI) by only 3 to 4% and productivity by only 2 to 4%. In contrast, extending the growing season of the understory relative to the overstory by one week in both spring and fall, increased understory LAI by 35% and productivity by 32%. A 2-week extension of the growing period in both spring and fall increased understory LAI by 53% and productivity by 55%.

Governing Forests for Provisioning Services: The Example of Honey Production in Southwest Ethiopia

NARCIS (Netherlands)

Wiersum, F.; Endalamaw, T.B.

2013-01-01

Provisioning services are major environmental services provided by forests. Especially in tropical countries, the livelihoods of local people often partly depend on a range of timber and non-timber forest products. The governance arrangements concerning such locally valued environmental services are

Local and Regional Economic Benefits from Forest Products Production Activities at the Savannah River Site: 1955-Present

International Nuclear Information System (INIS)

Teeter, L.; Blake, J.I.

2002-01-01

SRS was established in 1951 as a nuclear materials production facility; however, decline in the defense mission budget at SRS has created a major economic impact on the community in the Central Savannah River Area. SRS has been offsetting these effects by producing revenue (80 million dollars to date) from the sale of forest products since 1955 primarily trees, but also pine straw. Revenue has been re-invested into the infrastructure development, restoration and management of natural resources. Total asset value of the forest-land has increased from 21 million to over 500 million dollars in the same period

Climate seasonality limits leaf carbon assimilation and wood productivity in tropical forests

Science.gov (United States)

Fabien H. Wagner; Bruno Herault; Damien Bonal; Clement Stahl; Liana O. Anderson; Timothy R. Baker; Gabriel Sebastian Becker; Hans Beeckman; Danilo Boanerges Souza; Paulo Cesar Botosso; David M. J. S. Bowman; Achim Brauning; Benjamin Brede; Foster Irving Brown; Jesus Julio Camarero; Plinio Barbosa Camargo; Fernanda C. G. Cardoso; Fabricio Alvim Carvalho; Wendeson Castro; Rubens Koloski Chagas; Jerome Chave; Emmanuel N. Chidumayo; Deborah A. Clark; Flavia Regina Capellotto Costa; Camille Couralet; Paulo Henrique da Silva Mauricio; Helmut Dalitz; Vinicius Resende de Castro; Jacanan Eloisa de Freitas Milani; Edilson Consuelo de Oliveira; Luciano de Souza Arruda; Jean-Louis Devineau; David M. Drew; Oliver Dunisch; Giselda Durigan; Elisha Elifuraha; Marcio Fedele; Ligia Ferreira Fedele; Afonso Figueiredo Filho; Cesar Augusto Guimaraes Finger; Augusto Cesar Franco; Joao Lima Freitas Junior; Franklin Galvao; Aster Gebrekirstos; Robert Gliniars; Paulo Mauricio Lima de Alencastro Graca; Anthony D. Griffiths; James Grogan; Kaiyu Guan; Jurgen Homeier; Maria Raquel Kanieski; Lip Khoon Kho; Jennifer Koenig; Sintia Valerio Kohler; Julia Krepkowski; Jose Pires Lemos-Filho; Diana Lieberman; Milton Eugene Lieberman; Claudio Sergio Lisi; Tomaz Longhi Santos; Jose Luis Lopez Ayala; Eduardo Eijji Maeda; Yadvinder Malhi; Vivian R. B. Maria; Marcia C. M. Marques; Renato Marques; Hector Maza Chamba; Lawrence Mbwambo; Karina Liana Lisboa Melgaco; Hooz Angela Mendivelso; Brett P. Murphy; Joseph O' Brien; Steven F. Oberbauer; Naoki Okada; Raphael Pelissier; Lynda D. Prior; Fidel Alejandro Roig; Michael Ross; Davi Rodrigo Rossatto; Vivien Rossi; Lucy Rowland; Ervan Rutishauser; Hellen Santana; Mark Schulze; Diogo Selhorst; Williamar Rodrigues Silva; Marcos Silveira; Susanne Spannl; Michael D. Swaine; Jose Julio Toledo; Marcos Miranda Toledo; Marisol Toledo; Takeshi Toma; Mario Tomazello Filho; Juan Ignacio Valdez Hernandez; Jan Verbesselt; Simone Aparecida Vieira; Gregoire Vincent; Carolina Volkmer de Castilho; Franziska Volland; Martin Worbes; Magda Lea Bolzan Zanon; Luiz E. O. C. Aragao

2016-01-01

The seasonal climate drivers of the carbon cycle in tropical forests remain poorly known, although these forests account for more carbon assimilation and storage than any other terrestrial ecosystem. Based on a unique combination of seasonal pan-tropical data sets from 89 experimental sites (68 include aboveground wood productivity measurements and 35 litter...

Cellulose factories: advancing bioenergy production from forest trees.

Science.gov (United States)

Mizrachi, Eshchar; Mansfield, Shawn D; Myburg, Alexander A

2012-04-01

Fast-growing, short-rotation forest trees, such as Populus and Eucalyptus, produce large amounts of cellulose-rich biomass that could be utilized for bioenergy and biopolymer production. Major obstacles need to be overcome before the deployment of these genera as energy crops, including the effective removal of lignin and the subsequent liberation of carbohydrate constituents from wood cell walls. However, significant opportunities exist to both select for and engineer the structure and interaction of cell wall biopolymers, which could afford a means to improve processing and product development. The molecular underpinnings and regulation of cell wall carbohydrate biosynthesis are rapidly being elucidated, and are providing tools to strategically develop and guide the targeted modification required to adapt forest trees for the emerging bioeconomy. Much insight has already been gained from the perturbation of individual genes and pathways, but it is not known to what extent the natural variation in the sequence and expression of these same genes underlies the inherent variation in wood properties of field-grown trees. The integration of data from next-generation genomic technologies applied in natural and experimental populations will enable a systems genetics approach to study cell wall carbohydrate production in trees, and should advance the development of future woody bioenergy and biopolymer crops.

Forest Cover Estimation in Ireland Using Radar Remote Sensing: A Comparative Analysis of Forest Cover Assessment Methodologies

Science.gov (United States)

Devaney, John; Barrett, Brian; Barrett, Frank; Redmond, John; O`Halloran, John

2015-01-01

Quantification of spatial and temporal changes in forest cover is an essential component of forest monitoring programs. Due to its cloud free capability, Synthetic Aperture Radar (SAR) is an ideal source of information on forest dynamics in countries with near-constant cloud-cover. However, few studies have investigated the use of SAR for forest cover estimation in landscapes with highly sparse and fragmented forest cover. In this study, the potential use of L-band SAR for forest cover estimation in two regions (Longford and Sligo) in Ireland is investigated and compared to forest cover estimates derived from three national (Forestry2010, Prime2, National Forest Inventory), one pan-European (Forest Map 2006) and one global forest cover (Global Forest Change) product. Two machine-learning approaches (Random Forests and Extremely Randomised Trees) are evaluated. Both Random Forests and Extremely Randomised Trees classification accuracies were high (98.1–98.5%), with differences between the two classifiers being minimal (forest area and an increase in overall accuracy of SAR-derived forest cover maps. All forest cover products were evaluated using an independent validation dataset. For the Longford region, the highest overall accuracy was recorded with the Forestry2010 dataset (97.42%) whereas in Sligo, highest overall accuracy was obtained for the Prime2 dataset (97.43%), although accuracies of SAR-derived forest maps were comparable. Our findings indicate that spaceborne radar could aid inventories in regions with low levels of forest cover in fragmented landscapes. The reduced accuracies observed for the global and pan-continental forest cover maps in comparison to national and SAR-derived forest maps indicate that caution should be exercised when applying these datasets for national reporting. PMID:26262681

Mapping Forest Inventory and Analysis forest land use: timberland, reserved forest land, and other forest land

Science.gov (United States)

Mark D. Nelson; John Vissage

2007-01-01

The Forest Inventory and Analysis (FIA) program produces area estimates of forest land use within three subcategories: timberland, reserved forest land, and other forest land. Mapping these subcategories of forest land requires the ability to spatially distinguish productive from unproductive land, and reserved from nonreserved land. FIA field data were spatially...

Surface negative ion production in ion sources

International Nuclear Information System (INIS)

Belchenko, Y.

1993-01-01

Negative ion sources and the mechanisms for negative ion production are reviewed. Several classes of sources with surface origin of negative ions are examined in detail: surface-plasma sources where ion production occurs on the electrode in contact with the plasma, and ''pure surface'' sources where ion production occurs due to conversion or desorption processes. Negative ion production by backscattering, impact desorption, and electron- and photo-stimulated desorption are discussed. The experimental efficiencies of intense surface negative ion production realized on electrodes contacted with hydrogen-cesium or pure hydrogen gas-discharge plasma are compared. Recent modifications of surface-plasma sources developed for accelerator and fusion applications are reviewed in detail

Future carbon storage in harvested wood products from Ontario's Crown forests

International Nuclear Information System (INIS)

Chen, J.; Colombo, S.J.; Ter-Mikaelian, M.T.

2008-01-01

Carbon (C) storage in harvested wood products (HWP) from Ontario's Crown forests were analyzed using a large-scale forest C budget model. The model was used to estimate HWP C stock changes as defined by the Intergovernmental Panel on Climate Change. The harvested C mass was then allocated to 4 HWP end-use categories, notably (1) in use; (2) landfill; (3) energy; and (4) emissions. C mass redistribution among HWP end-use categories was calculated using an age-based C distribution matrix. Emissions for harvest, transport, and manufacturing were accounted for as well as emission reductions gained by using the HWP in place of other construction materials and fossil fuels. Results of the study showed that C storage in HWP is projected to increase by 3.6 Mt per year. The projections indicated that the harvest of wood products in Ontario will result in a steadily increasing C sink in HWP and forests. 51 refs., 8 tabs., 4 figs

The production of phytolith-occluded carbon in China's forests: implications to biogeochemical carbon sequestration.

Science.gov (United States)

Song, Zhaoliang; Liu, Hongyan; Li, Beilei; Yang, Xiaomin

2013-09-01

The persistent terrestrial carbon sink regulates long-term climate change, but its size, location, and mechanisms remain uncertain. One of the most promising terrestrial biogeochemical carbon sequestration mechanisms is the occlusion of carbon within phytoliths, the silicified features that deposit within plant tissues. Using phytolith content-biogenic silica content transfer function obtained from our investigation, in combination with published silica content and aboveground net primary productivity (ANPP) data of leaf litter and herb layer in China's forests, we estimated the production of phytolith-occluded carbon (PhytOC) in China's forests. The present annual phytolith carbon sink in China's forests is 1.7 ± 0.4 Tg CO2  yr(-1) , 30% of which is contributed by bamboo because the production flux of PhytOC through tree leaf litter for bamboo is 3-80 times higher than that of other forest types. As a result of national and international bamboo afforestation and reforestation, the potential of phytolith carbon sink for China's forests and world's bamboo can reach 6.8 ± 1.5 and 27.0 ± 6.1 Tg CO2  yr(-1) , respectively. Forest management practices such as bamboo afforestation and reforestation may significantly enhance the long-term terrestrial carbon sink and contribute to mitigation of global climate warming. © 2013 John Wiley & Sons Ltd.

Forgotten Forests? Food Potential of Ancient Coffee Forests and Agroforestry Systems in the Southwestern Ethiopian Mountains, Seen Through a Gender Lens

Directory of Open Access Journals (Sweden)

Sarah Marie Nischalke

2017-08-01

Full Text Available Forests play an important role in the provision of food and livelihoods across the globe. Thus, forest protection contributes to a diverse set of Sustainable Development Goals. The Yayu Coffee Forest Biosphere Reserve in the southwestern Ethiopian mountains (elevation 1100–2300 m above sea level hosts an ancient coffee forest with high biodiversity and a large nutritional potential. It is managed in zones, and smallholder farmers can still use forest resources in the buffer and transitional zones in a sustainable manner. The forest is rarely used as a food source, although a large majority of the population in this area suffers from micronutrient deficiencies. This article investigates whether sustainable use of forest resources can contribute to the achievement of different Sustainable Development Goals by looking, through a gender lens, at which forest ecosystem services the community uses; traditional coffee farmers' perceptions of wild edible plants, agricultural territories, and labor divisions; and the constraining factors for forest conservation and sustainable agroforestry on private forest plots. Data for this study were collected through ethnography, transect walks, a sex-disaggregated household survey (n = 334, 32 semistructured interviews, 40 focus groups, and 13 key stakeholder interviews. One reason for neglecting the forest as a food source is that forests are considered a male territory, while vegetable raising and nutrition are female responsibilities. In addition, the collection of wild foods is perceived as a last resort during a famine and as a practice of tribal groups. Because coffee production represents the traditional livelihood source, farmers accept the need to conserve the forest, which is necessary to achieve the Sustainable Development Goals. While it may have negative implications for food security, the absence of a tradition of collecting wild plants is positive news for forest conservation.

Machine Vision Technology for the Forest Products Industry

Science.gov (United States)

Richard W. Conners; D.Earl Kline; Philip A. Araman; Thomas T. Drayer

1997-01-01

From forest to finished product, wood is moved from one processing stage to the next, subject to the decisions of individuals along the way. While this process has worked for hundreds of years, the technology exists today to provide more complete information to the decision makers. Virginia Tech has developed this technology, creating a machine vision prototype for...

Deriving Forest Harvesting Machine Productivity from Positional Data

Science.gov (United States)

T.P. McDonald; S.E. Taylor; R.B. Rummer

2000-01-01

Automated production study systems will provide researchers a valuable tool for developing cost and impact models of forest operations under a wide range of conditions, making the development of true planning tools for tailoring logging systems to a particular site a reality. An automated time study system for skidders was developed, and in this study application of...

Determining landscape-level carbon emissions from historically harvested forest products

Science.gov (United States)

Sean Healey; Todd Morgan; Jon Songster; Jason. Brandt

2009-01-01

Resources have been developed in the literature to enable landowners to estimate the carbon sequestration timeline of forest products derived from their land. These tools were used here to estimate sequestration and emissions related to harvests carried out in Ravalli County from 1945 to 2007. This county-level accounting of product carbon release can later be combined...

Effect of policies on pellet production and forests in the U.S. South: a technical document supporting the Forest Service update of the 2010 RPA Assessment

Science.gov (United States)

Karen L. Abt; Robert C. Abt; Christopher S. Galik; Kenneth E. Skog

2014-01-01

Current policies in the European Union (EU) requiring renewable and low greenhouse gas-emitting energy are affecting wood products manufacturing and forests in the United States. These policies have led to increased U.S. pellet production and export to the EU, which has in turn affected U.S. forests and other wood products manufacturing. At this time, the primary...

Procurement of timber for the Finnish forest industries

International Nuclear Information System (INIS)

Hakkila, P.

1995-01-01

The procurement of timber to the forest industries in the Nordic countries is based on the log-length or shortwood system, and employs load-carrying forwarders and chainsaw of single-grip harvesters. This technology is characterized by high productivity, safety, suitability for small-sized trees, high recovery of timber, and environmental friendliness. About one fourth of the industrial timber in the whole world is harvested using the log-length system. The challenge of ecological sustainability, multiple use of forests, adoption of thinnings as a tool of management, trend toward improved utilization of forest biomass, and shift from natural forests to plantations all increase the global interest in the log-length system. The paper presents a review of the Finnish forest sector, the technology of timber harvesting and transport, productivity of logging work, and costs of timber at the mill. The highly mechanized logging systems of the forest industries and the lighter technology of self-employed forest owners are discussed separately. Furthermore, the use of residual biomass as a source of clean and renewable energy, the Finnish logging machine industry, and forest operations research in Finland are also reviewed. (46 refs., 35 figs., 8 tabs.)

Production dynamics of fine roots in beech forests: possible mechanism of resource allocation between above- and below-ground production

Science.gov (United States)

Nakahata, R.; Osawa, A.; Naramoto, M.; Mizunaga, H.; Sato, M.

2017-12-01

The masting phenomenon that seed production has large annual variation with spatial synchrony appears generally in beeches. Therefore, net primary production and carbon allocation mechanism in beech forests may differ among several years in relation to annual variation of seed production. On the other hand, fine roots play key roles in carbon dynamics and nutrient and water acquisition of an ecosystem. Evaluation of fine root dynamics is essential to understand long-term dynamics of production in forest ecosystems. Moreover, the influence of mast seeding on resource allocation should be clarified in such beech forests. The aim of this study is to clarify possible relationships between the patterns of above- and below-ground production in relation to the masting events using observation data of litter fall and fine root dynamics. We applied the litter trap method and a minirhizotron method in a cool-temperate natural forest dominated by beech (Fagus crenata Blume). Ten litter traps were set from 2008 to 2016, then annual leaf and seed production were estimated. Four minirhizotron tubes were buried in Aug. 2008 and soil profiles were scanned monthly until Nov. 2016 during the periods of no snow covering. The scanned soil profiles were analyzed for calculating fine root production using the WinRHIZO Tron software. In the present study site, rich production of mast seeding occurred biennially and fine root production showed various seasonal patterns. There was no significant correlation between seed production and annual fine root production in the same year. However, seed production had a positive correlation with fine root production in autumn in the previous year and indicated a negative correlation with that in autumn in the current year. These results indicate that higher fine root production has led to increased nutrient acquisition, which resulted in rich seed production in the next year. It is also suppressed after the masting events due to shortage in

Forests and wood consumption on the carbon balance. Carbon emission reduction by use of wood products

International Nuclear Information System (INIS)

Sikkema, R.; Nabuurs, G.J.

1995-01-01

Until now studies on the greenhouse effect paid much attention to carbon fixation by forests, while the entire CO2 cycle of forests and forest products remained underexposed. Utilization of wood products instead of energy-intensive materials (plastics/steel) and fossil fuels (coal) proves to play an important role as well. The effect of utilization is even greater than that of fixation. In all, additional forests together with the multiple use of trees can contribute substantially to the reduction of CO2 emissions. The contribution can run from 5.3 ton CO2/ha/yr for a mixed forest of oak/beech to 18.9 ton CO2/ha/yr for energy plantations (poplar). 2 figs., 3 tabs

An overview of the forest products sector downturn in the United States

Science.gov (United States)

C.W. Woodall; P.J. Ince; K.E. Skog; F.X. Aguilar; C.E. Keegan; C.B. Sorenson; D.G. Hodges; W.B. Smith

2012-01-01

In recent years, the forest products industry of the U.S. experienced a downturn in output to levels not seen in decades and employment losses in the hundreds of thousands-- for instance, a number far greater than witnessed in the Nation's automotive industry. The extent of the forest industry downturn varies by sector, impacted by structural changes in the...

economic assessment of two selected non-timber forest products in ...

African Journals Online (AJOL)

Aladex

forest product commonly used for domestic and industrial energy generation. ... continue to depend on wood because bringing oil, gas and electricity within their .... coppicing and coppice trees are normally harvested in rotational patches ...

Atmospheric versus biological sources of polycyclic aromatic hydrocarbons (PAHs) in a tropical rain forest environment.

Science.gov (United States)

Krauss, Martin; Wilcke, Wolfgang; Martius, Christopher; Bandeira, Adelmar G; Garcia, Marcos V B; Amelung, Wulf

2005-05-01

To distinguish between pyrogenic and biological sources of PAHs in a tropical rain forest near Manaus, Brazil, we determined the concentrations of 21 PAHs in leaves, bark, twigs, and stem wood of forest trees, dead wood, mineral topsoil, litter layer, air, and Nasutitermes termite nest compartments. Naphthalene (NAPH) was the most abundant PAH with concentrations of 35 ng m(-3) in air (>85% of the sum of 21PAHs concentration), up to 1000 microg kg(-1) in plants (>90%), 477 microg kg(-1) in litter (>90%), 32 microg kg(-1) in topsoil (>90%), and 160 microg kg(-1) (>55%) in termite nests. In plants, the concentrations of PAHs in general decreased in the order leaves > bark > twigs > stem wood. The concentrations of most low-molecular weight PAHs in leaves and bark were near equilibrium with air, but those of NAPH were up to 50 times higher. Thus, the atmosphere seemed to be the major source of all PAHs in plants except for NAPH. Additionally, phenanthrene (PHEN) had elevated concentrations in bark and twigs of Vismia cayennensis trees (12-60 microg kg(-1)), which might have produced PHEN. In the mineral soil, perylene (PERY) was more abundant than in the litter layer, probably because of in situ biological production. Nasutitermes nests had the highest concentrations of most PAHs in exterior compartments (on average 8 and 15 microg kg(-1) compared to atmosphere controls the concentrations of most PAHs. However, the occurrence of NAPH, PHEN, and PERY in plants, termite nests, and soils at elevated concentrations supports the assumption of their biological origin.

Assesment of forest products market potential as a basis for forest sector development in the Jablanica District

Directory of Open Access Journals (Sweden)

Keča Ljiljana

2015-01-01

Full Text Available One of the main tasks of marketing research is the assessment of market potential. The aim of this research was to analyze the dynamics of selling and buying of wood and nonwood forest products (NWFPs within the analyzed enterprises in the Jablanica District. The purpose of this research was to examine the possibilities for the development of small and medium-sized enterprises (SMEs directed towards a sustainable use of forest products in the area of the Jablanica District. The subject of this research is: purchased and placed quantities in the analyzed enterprises, as well as the prices that were realized for the products, with special emphasis on commercially important mushrooms. The research was conducted in the territory of Jablanica and it included five enterprises engaged in the purchasing, processing and sale of NWFPs and the Forest Estate (FE “Forest” Leskovac. The purchase of raw forest fruits and herbs had a growing trend (+ 17.8% in the 2006-2013 period. The average annual growth rate (AAGR of sales was 3.4% for medicinal plants and 30.6% for mushrooms. The AAGR of NWFPs export was + 32.6%. The placement of beech wood assortments (K class recorded a purchase AAGR of app. + 12.7%. In 2013, it was found that the NWFPs with the highest market value were: blueberry, dried boletus and chanterelle. In 2013, their total gross revenue in the domestic market amounted to 82.3 million RSD, whereas the total gross revenue of the analyzed beech wood assortments was 87 million RSD. [Projekat Ministarstva nauke Republike Srbije, br. 37008: Održivo gazdovanje ukupnim potencijalima šuma u Republici Srbiji i br. TP 31041: Šumski zasadi u funkciji povećanja pošumljenosti Srbije

Monitoring 2009 Forest Disturbance Across the Conterminous United States, Based on Near-Real Time and Historical MODIS 250 Meter NDVI Products

Science.gov (United States)

Spruce, J.; Hargrove, W. W.; Gasser, G.; Smoot, J. C.; Kuper, P.

2009-01-01

This case study shows the promise of computing current season forest disturbance detection products at regional to CONUS scales. Use of the eMODIS expedited product enabled a NRT CONUS forest disturbance detection product, a requirement for an eventual, operational forest threat EWS. The 2009 classification product from this study can be used to quantify the areal extent of forest disturbance across CONUS, although a quantitative accuracy assessment still needs to be completed. However, the results would not include disturbances that occurred after July 27, such as the Station Fire. While not shown here, the project also produced maximum NDVI products for the June 10-July 27 period of each year of the 2000-2009 time frame. These products could be applied to compute forest change products on an annual basis. GIS could then be used to assess disturbance persistence. Such follow-on work could lead to attribution of year in which a disturbance occurred. These products (e.g., Figures 6 and 7) may also be useful for assessing forest change associated with climate change, such as carbon losses from bark beetle-induced forest mortality in the Western United States. Other MODIS phenological products are being assessed for aiding forest monitoring needs of the EWS, including cumulative NDVI products (Figure 10).

Radionuclides in forest ecosystems

International Nuclear Information System (INIS)

Strebl, F.; Bossew, P.; Kienzl, K.; Hiesel, E.

2000-01-01

Some regions within Austria were highly contaminated (> 50 kBq m -2 ) with radiocaesium by the deposition event following the Chernobyl reactor accident in 1986. Monitoring carried out by several Austrian institutions showed that in contrast to agricultural products radiocaesium levels in wild berries, mushrooms and game meat from forest ecosystems remained considerably higher over the years. To find reasons for this contrasting radioecological behavior and for the derivation of model input parameters, an extended study about the distribution of 137 Cs within three Austrian forest stands was carried out between 1987 and 1997. Results of this and subsequent studies are summarized and include the following ecosystem compartments: forest soils, litter, trees, bilberry, mushrooms, mosses, ferns, lichen, other vegetation, insects, small mammals, game animals and surface water. Besides the investigation of radioecological behavior an estimation of pool sizes and transfer rates as well as radioecological residence half times for 137 Cs in different forest species was used to compile a radiocaesium balance for the years 1988 and 1996. Soil proved to be an effective sink for radiocaesium contamination, but in long-term perspective it can act as a source for the contamination of vegetation and higher levels of the food-chain as well. Due to the high standing biomass trees represent the largest 'living' radiocaesium pool within the investigated forest stand. Dose estimations based on average consume habits gave no significant increase (less than 0.4 %) of the annual average population radiation dose due to the ingestion of forest products from the investigated forest stands. (author)

Analysis of trends in isoprene and monoterpenes in a remote forest and an anthropogenic influenced forest

Science.gov (United States)

Usenko, S.; Sheesley, R. J.; Winfield, Z.; Yoon, S.; Erickson, M.; Flynn, J. H., III; Alvarez, S. L.; Wallace, H. W., IV; Griffin, R. J.

2017-12-01

The University of Houston Mobile Air Quality Laboratory (MAQL) was deployed to the University of Michigan Biological Station (UMBS) in July 2016 as part of the PROPHET-AMOS study and then was deployed to Jones Forest located north of Houston, TX from August 12 through September 23, 2016. Both sites are heavily forested, but UMBS is remote with no anthropogenic influence while Jones Forest sees frequent pollution transport from Houston. UMBS experienced periods of high isoprene:monoterpenes and periods of equivalent isoprene:monoterpenes, while Jones Forest had a consistently high isoprene:monoterpenes. This provided for a test bed to look at the interactions within two forested environments as well as the influence of anthropogenic sources. The MAQL was outfitted to measure O3 (2B Technology), NOy and SO2 (Thermo Scientific), NO/NOx (Air Quality Design), CO (Los Gatos), and select biogenic volatile organic carbon (BVOC) with their oxidation products (Ionicon PTR-MS). The instruments sampled from MAQL's 6 m tower at both sites. The UMBS site was below canopy and the Jones Forest site was in an open field surrounded by forest. The trends in isoprene and monoterpenes were explored in relation to time-of-day, temperature, and precipitation for both locations. In addition, the production of methyl vinyl ketone and methacrolein under these different conditions of meteorology, trace gas composition and BVOC composition was explored.

Appraisal of Farm Forestry Department around Tinderet Forest

International Nuclear Information System (INIS)

Nyambati, R.O; Koech, C.K; Muok, G

2007-01-01

Tinderet forest is one of the most important catchment areas of lake victoria. It is the main source of numerous springs, streams, and rivers that flow into the lake. The forest is also an important habitat for wide variety of water plants and animal species. Although the forest is gazetted as a forest reserve, it has undergone different levels of degradation due to over exploitation of timber, posts, firewood, charcoal and honey by the community living next to the forest. Resource from the forest supplement the communities' meagre income from subsistence farming. A survey was conducted in four Divisions (Chichila, Kipkelion, Fort-Tanan and Tinderet) around the forest to evaluate the status of farm forestry development and underlying reasons for encroachment in the forest. The results showed that, 61% of the people around Tinderet forest were settlers, whose duration of settlement is between 30-40 years. Most farmers were involved in various forms of farming (livestock or crop production) but forestry was not reported as a major activity. Clearing for livestock and crop production, timber for construction and firewood are the main causes of vegetation depletion on farms. Upto 60% of the households were not self reliant on wood products mainly timber and firewood and Fort-Tana (78%) and Kipkelion (70%) were the most affected. Forestry extension services were mainly provided by the Ministry of Agriculture and East African Wildlife Society (EAWS) and were found to be poor on the ground. Other issues that hampered forest development are inadequate provision of germplasm (seed and seedlings). There is therefore a need to build the capacity of the community in the farm forestry through establishment of nurseries and provision of adequate extension services. This would contribute to enhancement of self-reliance in wood products and increased income reducing encroachment into the gazetted forest

Tropical forests are a net carbon source based on aboveground measurements of gain and loss.

Science.gov (United States)

Baccini, A; Walker, W; Carvalho, L; Farina, M; Sulla-Menashe, D; Houghton, R A

2017-10-13

The carbon balance of tropical ecosystems remains uncertain, with top-down atmospheric studies suggesting an overall sink and bottom-up ecological approaches indicating a modest net source. Here we use 12 years (2003 to 2014) of MODIS pantropical satellite data to quantify net annual changes in the aboveground carbon density of tropical woody live vegetation, providing direct, measurement-based evidence that the world's tropical forests are a net carbon source of 425.2 ± 92.0 teragrams of carbon per year (Tg C year -1 ). This net release of carbon consists of losses of 861.7 ± 80.2 Tg C year -1 and gains of 436.5 ± 31.0 Tg C year -1 Gains result from forest growth; losses result from deforestation and from reductions in carbon density within standing forests (degradation or disturbance), with the latter accounting for 68.9% of overall losses. Copyright © 2017 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

Linking chemical elements in forest floor humus (Oh-horizon) in the Czech Republic to contamination sources

International Nuclear Information System (INIS)

Sucharova, Julie; Suchara, Ivan; Hola, Marie; Reimann, Clemens; Boyd, Rognvald; Filzmoser, Peter; Englmaier, Peter

2011-01-01

While terrestrial moss and other plants are frequently used for environmental mapping and monitoring projects, data on the regional geochemistry of humus are scarce. Humus, however, has a much larger life span than any plant material. It can be seen as the 'environmental memory' of an area for at least the last 60-100 years. Here concentrations of 39 elements determined by ICP-MS and ICP AES, pH and ash content are presented for 259 samples of forest floor humus collected at an average sample density of 1 site/300 km 2 in the Czech Republic. The scale of anomalies linked to known contamination sources (e.g., lignite mining and burning, metallurgical industry, coal fired power plants, metal smelters) is documented and discussed versus natural processes influencing humus quality. Most maps indicate a local impact from individual contamination sources: often more detailed sampling than used here would be needed to differentiate between likely sources. - Highlights: → Concentrations of 39 elements in forest floor humus are provided. → The capabilities of humus sampling for bio-monitoring purposes are demonstrated. → Geochemical anomalies are linked to known contamination sources. → The study shows the importance of scale for geochemical mapping projects. → Humus provides a picture of the long term contamination history of a country. - Forest floor humus, the atmosphere-biosphere-pedosphere interface, archives an environmental contamination signal over long time periods.

The Four Corners timber harvest and forest products industry, 2012

Science.gov (United States)

Colin B. Sorenson; Steven W. Hayes; Todd A. Morgan; Eric A. Simmons; Micah G. Scudder; Chelsea P. McIver; Mike T. Thompson

2016-01-01

This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2012, describes the composition and operations of the region’s primary forest products industry, and quantifies volumes and uses of wood fiber. Recent changes in the wood products industry are discussed, as well as trends...

How forest management affects ecosystem services, including timber production and economic return

DEFF Research Database (Denmark)

Duncker, Philipp S.; Raulund-Rasmussen, Karsten; Gundersen, Per

2012-01-01

and services. By use of virtual but realistic datasets, we quantified, for multiple services, the effects of five forest management alternatives that form an intensity gradient. Our virtual forest management units represented Central European forest ecosystems in the submontane vegetation zone under a humid......–temperate climate with acidic soils. In this zone the European beech (Fagus sylvatica L.) is the dominant tree species. In order to assess the effects on ecosystem services, the untouched natural forest reserve served as a reference. Wherever possible, response functions were deduced to couple the various services...... via stand-level data to demonstrate trade-offs between the services. Management units comprised all development phases in the sense of a "normal forest". It was clearly illustrated that maximizing the rates of biomass production and carbon sequestration may conflict with protection of authentic...

Transfer of Virtual Water of Woody Forest Products from China

Directory of Open Access Journals (Sweden)

Kaisheng Luo

2018-02-01

Full Text Available Global freshwater resources are under increasing pressure. It is reported that international trade of water-intensive products (the so-called virtual water trade can be used to ease global water pressure. In spite of the significant amount of international trade of woody forest products, virtual water of woody forest products (VWWFP and the corresponding international trade are largely ignored. However, virtual water research has progressed steadily. This study maps VWWFP and statistically analyzes China’s official data for the period 1993–2014. The results show a rapid increase in the trend of VWWFP flow from China, reaching 7.61 × 1012 m3 or 3.48 times annual virtual water trade for agricultural products. The export and import volumes of China are respectively 1.27 × 1012 m3 and 6.34 × 1012 m3 for 1993–2014. China imported a total of 5.07 × 1012 m3 of VWWFP in 1993–2014 to lessen domestic water pressure, which is five times the annual water transfer via China’s South–North Water Transfer project. Asia and Europe account for the highest contribution (50.52% to China’s import. Other contributors include the Russian Federation (16.63%, Indonesia (13.45%, Canada (13.41%, the United States of America (9.60%, Brazil (7.23% and Malaysia (6.33%. China mainly exports VWWFP to Asia (47.68%, North America (23.24%, and Europe (20.01%. The countries which export the highest amount of VWWFP include the United States of America, Japan, Republic of Korea and Canada. Then the countries which import the highest amount of VWWFP include the Russian Federation, Canada, United States of America, and Brazil. The VWWFP flow study shows an obvious geographical distribution that is driven by proximity and traffic since transportation cost of woody forest products could be significant.

Perceptions on the Importance of Forest Sector Innovations: Biofuels, Biomaterials, or Niche Products?

Directory of Open Access Journals (Sweden)

T. Stern

2018-05-01

Full Text Available New innovations are called for to renew the European forest sector into bioeconomy. However, little research exists on how the industry innovativeness is publicly perceived. Using data collected with an online questionnaire in four European countries, we investigate perceptions related to forest sector innovations on 13 current and new bioeconomy-related products and services. Altogether, 218 valid responses were received in 2015, and the data were analysed using descriptive statistics, performance-importance analysis, and Gartner’s innovation hype cycle. Based on our results, the respondents were in the strongest agreement that the forest sector has since the year 2000 has produced innovations related to wood building systems, construction materials, and wood composites. In the next 15 years, they foresaw a decline in innovations related to biofuels and paper products. The European forest sector also has future potential in wood construction, which is likely related to international policy targets related to carbon mitigation and capture. The observed variation in perceptions among the respondents on forest sector innovativeness calls for strengthening industry R&D, as well as by improving societal awareness of ongoing innovation projects by developing better communication.

Development of a Computer Vision Technology for the Forest Products Manufacturing Industry

Science.gov (United States)

D. Earl Kline; Richard Conners; Philip A. Araman

1992-01-01

The goal of this research is to create an automated processing/grading system for hardwood lumber that will be of use to the forest products industry. The objective of creating a full scale machine vision prototype for inspecting hardwood lumber will become a reality in calendar year 1992. Space for the full scale prototype has been created at the Brooks Forest...

Chicken fat and inorganic nitrogen source for lipase production by ...

African Journals Online (AJOL)

MA41) from Atlantic Forest, using chicken fat and association of organic and inorganic nitrogen sources in submerged fermentation to seek economically attractive bioprocess. A 2-level, 4-factor Central Composite Design (CCD) and response ...

Use of forest products by the local people of the Salonga National Park in the Congo

Directory of Open Access Journals (Sweden)

Jose Mbenga Ibesoa

2009-01-01

Full Text Available This article attempted to define a compromise making it possible the satisfaction of the material needs of the populations living within the National park of Salonga while ensuring the conservation of long-term forest resources. The management of the forests requires deepened knowledge of the resources and the participation of the local communities, which are the better, informed on of the forest resources. The implementing of a policy on sustainable forest management would be possible by a better integration and participation of the local populations. A survey was carried out in four villages of the National park of Salonga. The results of the investigation show clearly a positive attitude of the rural populations with regard to the forest resources. The diversity of the needs for the population corresponds to the choice of the products and services of the forest. Overall, the potential of the park’s forests is superior in comparison with the needs of the population. The exploitation of the forest products is vast and is included in the category of a system of an economy of collection.

Human dose pathways of radionuclides in forests

International Nuclear Information System (INIS)

Rantavaara, A.

2009-01-01

Forest soil, understorey vegetation and trees are all sources of radionuclides and human radiation doses after contaminating atmospheric deposition. People are exposed to radiation externally from sources outside the body and internally via ingestion and inhalation of radionuclides. Understorey vegetation contributes to ingestion doses through berries, herbs, wild honey, mushrooms and game meat; also trees provide feed to terrestrial birds and big game. During stay in forests people are subject to external radiation from forest floor and overstorey, and they may inhale airborne radioactive aerosol or gaseous radionuclides in ground level air. In the early phase of contamination also resuspended radionuclides may add to the internal dose of people via inhalation. People in Nordic countries are most exposed to radiation via ingestion of radionuclides in wild foods. The distribution of radionuclides in forests is changed by environmental processes, and thereby also the significance of various dose pathways to humans will change with time. External exposure is received in living environment from contaminated stemwood used as building timber and for manufacturing of furniture and other wood products. The aim of this paper is to outline the significance of various human dose pathways of radionuclides in forests considering the public and workers in forestry and production of bioenergy. Examples on effective doses are given based on two historical events, atmospheric nuclear weapon tests (mostly in 1950's and in 1960's) and the Chernobyl nuclear power plant accident in 1986. (au)

Finding effective ways to provide knowledge to forest managers about non-timber forest products: a case-study of distance learning approaches

Science.gov (United States)

A. L. (Tom) Hammett; Jim Chamberlain; Matt Winn

2009-01-01

Many who grow or collect non-timber forest products (NTFPs) have been under-served in traditional forestry educational programs. It has often been difficult to determine the needs of this disparate group of stakeholders as collectors and growers are widely dispersed across the landscape, and not recognized as important stakeholders in formal cost forest...

Nitrogen alters carbon dynamics during early succession in boreal forest

Science.gov (United States)

Steven D. Allison; Tracy B. Gartner; Michelle C. Mack; Krista McGuire; Kathleen. Treseder

2010-01-01

Boreal forests are an important source of wood products, and fertilizers could be used to improve forest yields, especially in nutrient poor regions of the boreal zone. With climate change, fire frequencies may increase, resulting in a larger fraction of the boreal landscape present in early successional stages. Since most fertilization studies have focused on mature...

Interest in energy wood and energy crop production among Finnish non-industrial private forest owners

International Nuclear Information System (INIS)

Raemoe, A.-K.; Jaervinen, E.; Latvala, T.; Toivonen, R.; Silvennoinen, H.

2009-01-01

EU targets and regulations regarding energy production and the reduction of greenhouse gas emissions have been tightening in the 2000s. In Finland the targets are planned to be achieved mainly by increasing the use of biomass. Wood already accounts for a marked proportion of Finnish energy production, but additional reserves are still available. Energy crop production also has considerable potential. Practically all Finnish farmers are also forest owners. Therefore, private forest owners are in a decisive position regarding the supply of energy wood and crops in Finland. In this paper the future supply of biomass is examined according to their past behaviour, intentions and attitudes. Finnish forest owners have a positive attitude towards the use of wood and crops in energy production. Price is becoming more critical as a motive for the supply of energy wood. Recreation and nature conservation play a smaller role than factors related to wood production and forest management as for motives for harvesting energy wood. However, almost a half of forest owners in this study were uncertain of their willingness to supply biomass. This is partly due to limited knowledge of the issues involved in energy wood and agricultural energy crop production and the underdeveloped markets for energy biomass. In order to achieve the targets, supply should be activated by further developing market practices, information, guidance and possibly other incentives for landowners. In general, there is interest among landowners in increasing the supply of energy biomass. However, the growth of supply presumes that production is an economically attractive and competitive alternative, that the markets are better organized than at present, and that more comprehensive information is available about bioenergy and biomass markets and production techniques.

Forest industries energy reserch: summary

Energy Technology Data Exchange (ETDEWEB)

Scott, G C

1976-01-01

The forest industries, which contribute 10% of New Zealand's factory production and consume 25% of all industrial energy (including self-generated sources such as waste liquors and wood wastes), were closely investigated to determine the extent to which imported energy sources can be substituted by local sources and savings made in the specific energy consumption of the industry's products. Issues considered as fundamental to the study were conservation of the nation's fossil fuels; nuclear power should be considered only after full study of its implications; restraints on the growth of energy demands; a greater emphasis on renewable energy resources; and new energy-intensive industries must account for the environmental and social costs of providing the energy. The study was commenced in February 1975 and involved a series of visits to all the major plants and a few representative smaller plants. Energy balances for all the major plants were prepared and are published in the text of the report. The forest-based industries have developed from a large number of small scattered sawmills, drawing from indigenous resources into a few large industrial units which are capital-intensive and produce a wide variety of products serving the home and export markets. They fall into four categories, roughly as follows: large integrated units; intermediate-size integrated mills; sawmills and chip plants; and manufacturing.

Influence of markets and forest composition on lumber production in Pennsylvania

Science.gov (United States)

William G. Luppold; Matthew S. Bumgardner

2006-01-01

In this study, we examine regional differences in the hardwood timber resources of Pennsylvania and how the combined changes in inventory volume, forest composition, and lumber prices have influenced regional lumber production. Isolation of these relationships is important because shifts in lumber production reflect changes in harvesting activity. In turn, harvesting...

Bee community as a source of energy in the production of food, honey-plants in the ecosystem of Croatian Forests' hunting grounds.

Science.gov (United States)

Tucak, Zvonimir; Beuk, Darko; Jumić, Vlado; Tusek, Tatjana; Vladimir-Knezević, Sanda; Tolusić, Zdravko; Skrivanko, Mario; Konjarović, Anastazija; Aladić, Krunoslav; Cupurdija, Edita

2009-12-01

In addition to the process of photosynthesis, the bee community is the main source of energy in food production, honey-plants used by game and people in the hunting grounds ecosystem. It is a well-known fact that thousands of plant species depend on the presence of bee communities (pollination, fertilization). In this paper we studied the presence of the bee community in the hunting grounds of Croatian Forests, and their influence on the number of game (wild pigs), as well as the quality of honey, honey plants in the hunting grounds used by people and game. We established the total number of game (wild boars). The honey quality parameters were determined using the Harmonised methods of the European Honey (Bogdanov et al., 1997) and the pollen analysis by were conducted according to Harmonised methods of melissopalynology (Von der Ohe et al., 2004). Research results indicate that the presence of the bee community influences the number of wild boars from 3-18%, and the quality of honey is in line with the European and world standards. The SAS/STAT package was used for the statistical analysis (SAS Institute Inc., 2000). The significance of the differences among the groups was determined by Duncan test.

Litterfall Production Prior to and during Hurricanes Irma and Maria in Four Puerto Rican Forests

Directory of Open Access Journals (Sweden)

Xianbin Liu

2018-06-01

Full Text Available Hurricanes Irma and Maria struck Puerto Rico on the 6th and 20th of September 2017, respectively. These two powerful Cat 5 hurricanes severely defoliated forest canopy and deposited massive amounts of litterfall in the forests across the island. We established a 1-ha research plot in each of four forests (Guánica State Forest, Río Abajo State Forest, Guayama Research Area and Luquillo Experiment Forest before September 2016, and had collected one full year data of litterfall production prior to the arrival of Hurricanes Irma and Maria. Hurricane-induced litterfall was collected within one week after Hurricane Irma, and within two weeks after Hurricane Maria. Each litterfall sample was sorted into leaves, wood (branches and barks, reproductive organs (flowers, fruits and seeds and miscellaneous materials (mostly dead animal bodies or feces after oven-drying to constant weight. Annual litterfall production prior to the arrival of Hurricanes Irma and Maria varied from 4.68 to 25.41 Mg/ha/year among the four forests, and annual litterfall consisted of 50–81% leaffall, 16–44% woodfall and 3–6% fallen reproductive organs. Hurricane Irma severely defoliated the Luquillo Experimental Forest, but had little effect on the other three forests, whereas Hurricane Maria defoliated all four forests. Total hurricane-induced litterfall from Hurricanes Irma and Maria amounted to 95–171% of the annual litterfall production, with leaffall and woodfall from hurricanes amounting to 63–88% and 122–763% of their corresponding annual leaffall and woodfall, respectively. Hurricane-induced litterfall consisted of 30–45% leaves and 55–70% wood. Our data showed that Hurricanes Irma and Maria deposited a pulse of litter deposition equivalent to or more than the total annual litterfall input with at least a doubled fraction of woody materials. This pulse of hurricane-induced debris and elevated proportion of woody component may trigger changes in

Biomass production from the U.S. forest and agriculture sectors in support of a renewable electricity standard

International Nuclear Information System (INIS)

White, Eric M.; Latta, Greg; Alig, Ralph J.; Skog, Kenneth E.; Adams, Darius M.

2013-01-01

Production of renewable energy from biomass has been promoted as means to improve greenhouse gas balance in energy production, improve energy security, and provide jobs and income. However, uncertainties remain as to how the agriculture and forest sectors might jointly respond to increased demand for bioelectricity feedstocks and the potential environmental consequences of increased biomass production. We use an economic model to examine how the agriculture and forest sectors might combine to respond to increased demands for bioelectricity under simulated future national-level renewable electricity standards. Both sectors are projected to contribute biomass, although energy crops, like switchgrass, produced on agriculture land are projected to be the primary feedstocks. At the highest targets for bioelectricity production, we project increased conversion of forest to agriculture land in support of agriculture biomass production. Although land conversion takes place in response to renewable electricity mandates, we project only minor increases in forest and agriculture emissions. Similarly, crop prices were projected to generally be stable in the face of increased bioelectricity demand and displacement of traditional agriculture crops. - Highlights: ► We model the response of forest and agriculture to increased bioelectricity demand. ► The agriculture sector, through energy crop production, is the key biomass provider. ► Increased land exchange is projected for the highest bioelectricity demands. ► Land exchange from forest to agriculture yield the greatest changes in GHG flux. ► Agriculture and forestry must be accounted for when considering bioenergy policy

Supply chains of forest chip production in Finland

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, Kalle (Metsaeteho Oy, Helsinki (Finland)), e-mail: kalle.karha@metsateho.fi

2010-07-15

The Metsaeteho study investigated how logging residue chips, stump wood chips, and chips from small sized thinning wood and large-sized (rotten) roundwood used by heating and power plants were produced in Finland in 2008. Almost all the major forest chip suppliers in Finland were involved in the study. The total volume of forest chips supplied in 2008 by these suppliers was 6.5 TWh. The study was implemented by conducting an e-mail questionnaire survey and telephone interviews. Research data was collected in March-May 2009. The majority of the logging residue chips and chips from small-sized thinning wood were produced using the roadside chipping supply chain in Finland in 2008. The chipping at plant supply chain was also significant in the production of logging residue chips. 70% of all stump wood chips consumed were comminuted at the plant and 29% at terminals. The role of the terminal chipping supply chain was also significant in the production of chips from logging residues and small-sized wood chips. When producing chips from large-sized (rotten) roundwood, nearly a half of chips were comminuted at plants and more than 40% at terminals

Supply systems of forest chip production in Finland

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K. (Metsaeteho Oy, Helsinki (Finland)), e-mail: kalle.karha@metsateho.fi

2010-07-01

The Metsaeteho study investigated how logging residue chips, stump wood chips, and chips from small-diameter thinning wood and large-sized (rotten) roundwood used by heating and power plants were produced in Finland in 2009. Almost all the major forest chip suppliers in Finland were involved in the study. The total volume of forest chips supplied in 2009 by these suppliers was 8,4 TWh. The study was implemented by conducting an e-mail questionnaire survey and telephone interviews. Research data was collected from March-May, 2010. The majority of the logging residue chips and chips from small-diameter thinning wood were produced using the roadside chipping supply system in Finland in 2009. The chipping at plant supply system was also significant in the production of logging residue chips. Nearly 70 % of all stump wood chips consumed were comminuted at the plant and 28 % at terminals. The role of the terminal chipping supply system was also significant in the production of chips from logging residues and small-diameter wood chips. When producing chips from large-sized (rotten) roundwood, similarly roughly 70 % of chips were comminuted at plants and 23 % at terminals. (orig.)

Supply chains of forest chip production in Finland

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K. (Metsaeteho Oy, Helsinki (Finland)), Email: kalle.karha@metsateho.fi

2009-07-01

The Metsaeteho study investigated how logging residue chips. stump wood chips, and chips from small-sized thinning wood and large-sized (rotten) roundwood used by heating and power plants were produced in Finland in 2008. Almost all the major forest chip suppliers in Finland were involved in the study. The total volume of forest chips supplied in 2008 by these suppliers was 6,5 TWh. The study was implemented by conducting an e-mail questionnaire survey and telephone interviews. Research data was collected in March-May 2009. The majority of the logging residue chips and chips from small-sized thinning wood were produced using the roadside chipping supply chain in Finland in 2008. The chipping at plant supply chain was also significant in the production of logging residue chips. 70% of all stump wood chips consumed were comminuted at the plant and 29% at terminals. The role of the terminal chipping supply chain was also significant in the production of chips from logging residues and small-sized wood chips. When producing chips from large-sized (rotten) roundwood, nearly a half of chips were comminuted at plants and more than 40 % at terminals. (orig.)

Status and Trends for the U.S. Forest Products Sector: A Technical Document Supporting the Forest Service 2010 RPA Assessment

Science.gov (United States)

Kenneth E. Skog; David B. McKeever; Peter J. Ince; James L. Howard; Henry N. Spelter; Albert T. Schuler

2012-01-01

Forest products sector products and income help sustain the social, economic, and ecological benefits of forestry in the United States. Solidwood products consumption increased with population between 1965 and 2008 and varied with housing starts. Lumber's share declined from 83% to 70%, and structural panels' share increased from 9% to 17%. Paper and...

A productivity and cost comparison of two systems for producing biomass fuel from roadside forest treatment residues

Science.gov (United States)

Nathaniel Anderson; Woodam Chung; Dan Loeffler; John Greg Jones

2012-01-01

Forest operations generate large quantities of forest biomass residues that can be used for production of bioenergy and bioproducts. However, a significant portion of recoverable residues are inaccessible to large chip vans, making use financially infeasible. New production systems must be developed to increase productivity and reduce costs to facilitate use of these...

Marketing of Non-Timber Forest Products in Kajola Local ...

African Journals Online (AJOL)

Marketing of Non-Timber Forest Products in Kajola Local Government Area of Oyo State, Nigeria. ... International Journal of Tropical Agriculture and Food Systems ... The results of the marketing margin reveal that charcoal commanded the highest margin of ₦2500, followed by bush meat (₦300), while wrapping had the ...

Climate Change for Agriculture, Forest Cover and 3d Urban Models

Science.gov (United States)

Kapoor, M.; Bassir, D.

2014-11-01

This research demonstrates the important role of the remote sensing in finding out the different parameters behind the agricultural crop change, forest cover and urban 3D models. Standalone software is developed to view and analysis the different factors effecting the change in crop productions. Open-source libraries from the Open Source Geospatial Foundation have been used for the development of the shape-file viewer. Software can be used to get the attribute information, scale, zoom in/out and pan the shapefiles. Environmental changes due to pollution and population that are increasing the urbanisation and decreasing the forest cover on the earth. Satellite imagery such as Landsat 5(1984) to Landsat TRIS/8 (2014), Landsat Data Continuity Mission (LDCM) and NDVI are used to analyse the different parameters that are effecting the agricultural crop production change and forest change. It is advisable for the development of good quality of NDVI and forest cover maps to use data collected from the same processing methods for the complete region. Management practices have been developed from the analysed data for the betterment of the crop and saving the forest cover

Mill demonstration of TMP production from forest thinnings: pulp quality, refining energy, and handsheet properties

Science.gov (United States)

J.Y. Zhu; C. Tim Scott; Roland Gleisner; Doreen Mann; D.P. Dykstra; G. Holton Quinn; Louis L. Edwards

2007-01-01

High-value, large-volume utilization of forest thinning materials from U.S. national forests is a potentially important contributor to sustainable forest health. This study demonstrated the utilization of wood chips produced from thinnings for the production of thermomechanical pulp (TMP). Both whole-log chips (primarily from small-diameter logs, tops, and reject logs...

Integrating concerns about wood production and sustainable forest management in the United States.

Science.gov (United States)

R.W. Haynes

2007-01-01

The implementation of Sustainable Forest Management (SFM) in the United States is strongly influenced by U.S. forest products markets and the numerous management decisions made by individual landowners and managers. These decisions are influenced by a mix of market incentives and regulatory actions reducing predictability in assessing progress towards SFM and causing...

Production of bio-oil from underutilized forest biomass using an auger reactor

Science.gov (United States)

H. Ravindran; S. Thangalzhy-Gopakumar; S. Adhikari; O. Fasina; M. Tu; B. Via; E. Carter; S. Taylor

2015-01-01

Conversion of underutilized forest biomass to bio-oil could be a niche market for energy production. In this work, bio-oil was produced from underutilized forest biomass at selected temperatures between 425–500°C using an auger reactor. Physical properties of bio-oil, such as pH, density, heating value, ash, and water, were analyzed and compared with an ASTM standard...

25 CFR 163.30 - Revocable road use and construction permits for removal of commercial forest products.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Revocable road use and construction permits for removal... Revocable road use and construction permits for removal of commercial forest products. (a) In accordance... revocable road use and construction permits to users for the purpose of removing forest products. (b) When a...

Challenge and Response, Strategies for Survival in a Rapidly Changing Forest Products Industry

Science.gov (United States)

Al Schuler; Craig Adair; Paul Winistorfer

2005-01-01

The U.S. has long been the world's largest market for wood and wood products, fueled by its demand for wood-frame housing. But forest product markets are changing, both in terns of where the products originate (domestically or abroad),and what products are being produced and consumed.

Extreme late-summer drought causes neutral annual carbon balance in southwestern ponderosa pine forests and grasslands

International Nuclear Information System (INIS)

Kolb, Thomas; Dore, Sabina; Montes-Helu, Mario

2013-01-01

We assessed the impacts of extreme late-summer drought on carbon balance in a semi-arid forest region in Arizona. To understand drought impacts over extremes of forest cover, we measured net ecosystem production (NEP), gross primary production (GPP), and total ecosystem respiration (TER) with eddy covariance over five years (2006–10) at an undisturbed ponderosa pine (Pinus ponderosa) forest and at a former forest converted to grassland by intense burning. Drought shifted annual NEP from a weak source of carbon to the atmosphere to a neutral carbon balance at the burned site and from a carbon sink to neutral at the undisturbed site. Carbon fluxes were particularly sensitive to drought in August. Drought shifted August NEP at the undisturbed site from sink to source because the reduction of GPP (70%) exceeded the reduction of TER (35%). At the burned site drought shifted August NEP from weak source to neutral because the reduction of TER (40%) exceeded the reduction of GPP (20%). These results show that the lack of forest recovery after burning and the exposure of undisturbed forests to late-summer drought reduce carbon sink strength and illustrate the high vulnerability of forest carbon sink strength in the southwest US to predicted increases in intense burning and precipitation variability. (letter)

Extreme late-summer drought causes neutral annual carbon balance in southwestern ponderosa pine forests and grasslands

Science.gov (United States)

Kolb, Thomas; Dore, Sabina; Montes-Helu, Mario

2013-03-01

We assessed the impacts of extreme late-summer drought on carbon balance in a semi-arid forest region in Arizona. To understand drought impacts over extremes of forest cover, we measured net ecosystem production (NEP), gross primary production (GPP), and total ecosystem respiration (TER) with eddy covariance over five years (2006-10) at an undisturbed ponderosa pine (Pinus ponderosa) forest and at a former forest converted to grassland by intense burning. Drought shifted annual NEP from a weak source of carbon to the atmosphere to a neutral carbon balance at the burned site and from a carbon sink to neutral at the undisturbed site. Carbon fluxes were particularly sensitive to drought in August. Drought shifted August NEP at the undisturbed site from sink to source because the reduction of GPP (70%) exceeded the reduction of TER (35%). At the burned site drought shifted August NEP from weak source to neutral because the reduction of TER (40%) exceeded the reduction of GPP (20%). These results show that the lack of forest recovery after burning and the exposure of undisturbed forests to late-summer drought reduce carbon sink strength and illustrate the high vulnerability of forest carbon sink strength in the southwest US to predicted increases in intense burning and precipitation variability.

Fine-Root Production in an Amazon Rain Forest: Deep Roots are an Important Component of Net Primary Productivity

Science.gov (United States)

Norby, R.; Cordeiro, A. L.; Oblitas, E.; Valverde-Barrantes, O.; Quesada, C. A.

2017-12-01

Fine-root production is a significant component of net primary production (NPP), but it is the most difficult of the major components to measure. Data on fine-root production are especially sparse from tropical forests, and therefore the estimates of tropical forest NPP may not be accurate. Many estimates of fine-root production are based on observations in the top 15 or 30 cm of soil, with the implicit assumption that this approach will capture most of the root distribution. We measured fine-root production in a 30-m tall, old-growth, terra firme rain forest near Manaus, Brazil, which is the site for a free-air CO2 enrichment (FACE) experiment. Ten minirhizotrons were installed at a 45 degree angle to a depth of 1.1 meters; the tubes were installed 2 years before any measurements were made to allow the root systems to recover from disturbance. Images were collected biweekly, and measurements of root length per area of minirhizotron window were scaled up to grams of root per unit land area. Scaling up minirhizotron measurments is problematic, but our estimate of fine-root standing crop in the top 15 cm of soil (281 ± 37 g dry matter m-2) compares well with a direct measurement of fine roots in two nearby 15-cm soil cores (290 ± 37 g m-2). Although the largest fraction of the fine-root standing crop was in the upper soil horizons, 44% of the fine-root mass was deeper than 30 cm, and 17% was deeper than 60 cm. Annual fine-root production was 934 ± 234 g dry matter m-2 (453 ± 113 g C m-2), which was 35% of estimated NPP of the forest stand (1281 g C m-2). A previous estimate of NPP of the forest at this site was smaller (1010 g m-2), but that estimate relied on fine-root production measured elsewhere and only in the top 10 or 30 cm of soil; fine roots accounted for 21% of NPP in that analysis. Extending root observations deeper into the soil will improve estimates of the contribution of fine-root production to NPP, which will in turn improve estimates of ecosystem

The Chandra Source Catalog: Source Properties and Data Products

Science.gov (United States)

Rots, Arnold; Evans, Ian N.; Glotfelty, Kenny J.; Primini, Francis A.; Zografou, Panagoula; Anderson, Craig S.; Bonaventura, Nina R.; Chen, Judy C.; Davis, John E.; Doe, Stephen M.; Evans, Janet D.; Fabbiano, Giuseppina; Galle, Elizabeth C.; Gibbs, Danny G., II; Grier, John D.; Hain, Roger; Hall, Diane M.; Harbo, Peter N.; He, Xiang Qun (Helen); Houck, John C.; Karovska, Margarita; Kashyap, Vinay L.; Lauer, Jennifer; McCollough, Michael L.; McDowell, Jonathan C.; Miller, Joseph B.; Mitschang, Arik W.; Morgan, Douglas L.; Mossman, Amy E.; Nichols, Joy S.; Nowak, Michael A.; Plummer, David A.; Refsdal, Brian L.; Siemiginowska, Aneta L.; Sundheim, Beth A.; Tibbetts, Michael S.; van Stone, David W.; Winkelman, Sherry L.

2009-09-01

The Chandra Source Catalog (CSC) is breaking new ground in several areas. There are two aspects that are of particular interest to the users: its evolution and its contents. The CSC will be a living catalog that becomes richer, bigger, and better in time while still remembering its state at each point in time. This means that users will be able to take full advantage of new additions to the catalog, while retaining the ability to back-track and return to what was extracted in the past. The CSC sheds the limitations of flat-table catalogs. Its sources will be characterized by a large number of properties, as usual, but each source will also be associated with its own specific data products, allowing users to perform mini custom analysis on the sources. Source properties fall in the spatial (position, extent), photometric (fluxes, count rates), spectral (hardness ratios, standard spectral fits), and temporal (variability probabilities) domains, and are all accompanied by error estimates. Data products cover the same coordinate space and include event lists, images, spectra, and light curves. In addition, the catalog contains data products covering complete observations: event lists, background images, exposure maps, etc. This work is supported by NASA contract NAS8-03060 (CXC).

Sustained effects of atmospheric [CO2] and nitrogen availability on forest soil CO2 efflux

Science.gov (United States)

A. Christopher Oishi; Sari Palmroth; Kurt H. Johnsen; Heather R. McCarthy; Ram. Oren

2014-01-01

Soil CO2 efflux (Fsoil) is the largest source of carbon from forests and reflects primary productivity as well as how carbon is allocated within forest ecosystems. Through early stages of stand development, both elevated [CO2] and availability of soil nitrogen (N; sum of mineralization, deposition, and fixation) have been shown to increase gross primary productivity,...

Analysis of forest product trade relationships between Turkey and ...

African Journals Online (AJOL)

amounts and the values, between 2002 and 2006, belonging to the EU member countries and Turkey were used. It has been found that all countries could be divided into nine different groups according to countries' forest products industry structures. Competition advantage is experienced in the board sector but not in the ...

Business Management Practices for Small to Medium Sized Forest Products Firms

OpenAIRE

Espinoza, Omar Alejandro; Smith, Robert L. (Robert Lee), 1955 August 21-

2015-01-01

This book offers advice and information for starting and guiding a small forest products business. It emphasizes the importance of business planning, human resource planning, marketing, and operations and financial management.

Responses of plant available water and forest productivity to variably layered coarse textured soils

Science.gov (United States)

Huang, Mingbin; Barbour, Lee; Elshorbagy, Amin; Si, Bing; Zettl, Julie

2010-05-01

Reforestation is a primary end use for reconstructed soils following oil sands mining in northern Alberta, Canada. Limited soil water conditions strongly restrict plant growth. Previous research has shown that layering of sandy soils can produce enhanced water availability for plant growth; however, the effect of gradation on these enhancements is not well defined. The objective of this study was to evaluate the effect of soil texture (gradation and layering) on plant available water and consequently on forest productivity for reclaimed coarse textured soils. A previously validated system dynamics (SD) model of soil moisture dynamics was coupled with ecophysiological and biogeochemical processes model, Biome-BGC-SD, to simulate forest dynamics for different soil profiles. These profiles included contrasting 50 cm textural layers of finer sand overlying coarser sand in which the sand layers had either a well graded or uniform soil texture. These profiles were compared to uniform profiles of the same sands. Three tree species of jack pine (Pinus banksiana Lamb.), white spruce (Picea glauce Voss.), and trembling aspen (Populus tremuloides Michx.) were simulated using a 50 year climatic data base from northern Alberta. Available water holding capacity (AWHC) was used to identify soil moisture regime, and leaf area index (LAI) and net primary production (NPP) were used as indices of forest productivity. Published physiological parameters were used in the Biome-BGC-SD model. Relative productivity was assessed by comparing model predictions to the measured above-ground biomass dynamics for the three tree species, and was then used to study the responses of forest leaf area index and potential productivity to AWHC on different soil profiles. Simulated results indicated soil layering could significantly increase AWHC in the 1-m profile for coarse textured soils. This enhanced AWHC could result in an increase in forest LAI and NPP. The increased extent varied with soil

Is forest management a significant source of monoterpenes into the boreal atmosphere?

Science.gov (United States)

Haapanala, S.; Hakola, H.; Hellén, H.; Vestenius, M.; Levula, J.; Rinne, J.

2012-04-01

Volatile organic compounds (VOCs) including terpenoids are emitted into the atmosphere from various natural sources. Damaging the plant tissue is known to strongly increase their monoterpene release. We measured the terpenoid emissions caused by timber felling, i.e. those from stumps and logging residue. The emissions from stumps were studied using enclosures and those from the whole felling area using an ecosystem-scale micrometeorological method, disjunct eddy accumulation (DEA). The compounds analyzed were isoprene, monoterpenes and sesquiterpenes. Strong emissions of monoterpenes were measured from both the stumps and from the whole felling area. The emission rate decreased rapidly within a few months after the logging. In addition to fresh logging residue, the results suggest also other strong monoterpene sources may be present in the felling area. These could include pre-existing litter, increased microbial activity and remaining undergrowth. In order to evaluate the possible importance of monoterpenes emitted annually from cut Scots pine forests in Finland, we conducted a rough upscaling calculation. The resulting monoterpene release was approximated to be on the order of 15 kilotonnes per year, which corresponds to about one tenth of the monoterpene release from intact forests in Finland.

Is forest management a significant source of monoterpenes into the boreal atmosphere?

Directory of Open Access Journals (Sweden)

S. Haapanala

2012-04-01

Full Text Available Volatile organic compounds (VOCs including terpenoids are emitted into the atmosphere from various natural sources. Damaging the plant tissue is known to strongly increase their monoterpene release. We measured the terpenoid emissions caused by timber felling, i.e. those from stumps and logging residue. The emissions from stumps were studied using enclosures and those from the whole felling area using an ecosystem-scale micrometeorological method, disjunct eddy accumulation (DEA. The compounds analyzed were isoprene, monoterpenes and sesquiterpenes. Strong emissions of monoterpenes were measured from both the stumps and from the whole felling area. The emission rate decreased rapidly within a few months after the logging. In addition to fresh logging residue, the results suggest also other strong monoterpene sources may be present in the felling area. These could include pre-existing litter, increased microbial activity and remaining undergrowth. In order to evaluate the possible importance of monoterpenes emitted annually from cut Scots pine forests in Finland, we conducted a rough upscaling calculation. The resulting monoterpene release was approximated to be on the order of 15 kilotonnes per year, which corresponds to about one tenth of the monoterpene release from intact forests in Finland.

Importance of disturbance history on net primary productivity in the world's most productive forests and implications for the global carbon cycle.

Science.gov (United States)

Volkova, Liubov; Roxburgh, Stephen H; Weston, Christopher J; Benyon, Richard G; Sullivan, Andrew L; Polglase, Philip J

2018-05-14

Analysis of growth and biomass turnover in natural forests of Eucalyptus regnans, the world's tallest angiosperm, reveals it is also the world's most productive forest type, with fire disturbance an important mediator of net primary productivity (NPP). A comprehensive empirical database was used to calculate the averaged temporal pattern of NPP from regeneration to 250 years age. NPP peaks at 23.1 ± 3.8 (95% interquantile range) Mg C ha -1  year -1 at age 14 years, and declines gradually to about 9.2 ± 0.8 Mg C ha -1  year -1 at 130 years, with an average NPP over 250 years of 11.4 ± 1.1 Mg C ha -1  year -1 , a value similar to the most productive temperate and tropical forests around the world. We then applied the age-class distribution of E. regnans resulting from relatively recent historical fires to estimate current NPP for the forest estate. Values of NPP were 40% higher (13 Mg C ha -1  year -1 ) than if forests were assumed to be at maturity (9.2 Mg C ha -1  year -1 ). The empirically derived NPP time series for the E. regnans estate was then compared against predictions from 21 global circulation models, showing that none of them had the capacity to simulate a post-disturbance peak in NPP, as found in E. regnans. The potential importance of disturbance impacts on NPP was further tested by applying a similar approach to the temperate forests of conterminous United States and of China. Allowing for the effects of disturbance, NPP summed across both regions was on average 11% (or 194 Tg C/year) greater than if all forests were assumed to be in a mature state. The results illustrate the importance of accounting for past disturbance history and growth stage when estimating forest primary productivity, with implications for carbon balance modelling at local to global scales. © 2018 John Wiley & Sons Ltd.

Reducing Electrical Consumption in the Forest Products Industry Using Lean Thinking

Directory of Open Access Journals (Sweden)

Scott William Lyon

2014-01-01

Full Text Available The forest products industry has an opportunity to reduce energy costs using energy management practices, thereby boosting its global competitiveness. Increasing manufacturing costs have contributed significantly to the decline of the forest products manufacturing industries in the U.S.; these increasing costs limit manufacturers’ abilities to compete with their global competitors. U.S. companies are continually improving their products, processes, finances, and business practices to better compete with global marketplaces; however, they may not be seizing all of the opportunities available through more efficient energy consumption practices. By eliminating non-valued added activities, lean thinking is an example of one tool that may improve performance and reduce costs. A case study was conducted at a cabinet manufacturer in Virginia to examine the impact of lean thinking on the consumption of electricity in the manufacturing process. An energy management system was used to provide rapid feedback on electrical energy consumption for production operations. Significant changes were observed after implementing energy reduction practices identified by lean thinking tools.

Trends and Possible Future Developments in Global Forest-Product Markets—Implications for the Swedish Forest Sector

Directory of Open Access Journals (Sweden)

Ragnar Jonsson

2011-01-01

Full Text Available This paper analyzes trends and possible future developments in global wood-product markets and discusses implications for the Swedish forest sector. Four possible futures, or scenarios, are considered, based on qualitative scenario analysis. The scenarios are distinguished principally by divergent futures with respect to two highly influential factors driving change in global wood-product markets, whose future development is unpredictable. These so-called critical uncertainties were found to be degrees to which: (i current patterns of globalization will continue, or be replaced by regionalism, and (ii concern about the environment, particularly climate change, related policy initiatives and customer preferences, will materialize. The overall future of the Swedish solid wood-product industry looks bright, irrespective of which of the four possible futures occurs, provided it accommodates the expected growth in demand for factory-made, energy-efficient construction components. The prospects for the pulp and paper industry in Sweden appear more ambiguous. Globalization is increasingly shifting production and consumption to the Southern hemisphere, adversely affecting employment and forest owners in Sweden. Further, technical progress in information and communication technology (ICT is expected to lead to drastic reductions in demand for newsprint and printing paper. Chemical pulp producers may profit from a growing bio-energy industry, since they could manufacture new, high-value products in integrated bio-refineries. Mechanical pulp producers cannot do this, however, and might suffer from higher prices for raw materials and electricity.

Wood fuels sources and markets

International Nuclear Information System (INIS)

Koopmans, Auke

2003-01-01

Biomass energy is an important source of energy in most Asian countries. Households and industries use substantial amounts of fuel wood, charcoal and other biomass energy, such as agricultural residues, dung, leaves and sawmill residues. The main household applications are cooking and heating whereas industrial applications range widely. This paper provides an overview of estimates on the production and trade of biomass fuels in the South-east Asia region. The flows and channels used in the supply of wood fuels in different countries were analysed. This paper may help in identifying policy gaps with regards to the supply and consumption of wood fuels from both forest and non-forest sources. (Author)

Biogeochemistry of Nitrous Oxide Production in the Red Mangrove ( Rhizophora mangle) Forest Sediments

Science.gov (United States)

Bauza, J. F.; Morell, J. M.; Corredor, J. E.

2002-11-01

This study was undertaken to quantify the emission and distribution of nitrous oxide and to explore its relation to pertinent physical and chemical parameters in a red mangrove forest located at Magueyes island, Puerto Rico. Rates of N2O evolution, which ranged from 0·05 to 1·4 μmole m-2 h-1 (overall mean=0·50 μmole m-2 h-1), are comparable to those of other previously studied ecosystems. A significant diel cycle of N2O emission was observed. Dissolved N2O concentration averaged 0·15 nmole cm-3 (SD=0·09, n=54) with a range of 0·1 to 0·57 nmole cm-3. Dissolved and exchangeable inorganic nitrogen was present mostly in the form of ammonium (overall mean=212·2 nmole cm-3) with lesser amounts of nitrate (overall mean=29·0 nmole cm-3). Redox potentials in the sediments generally decreased with depth, with a mean value of 377 mV at the sediment surfaces and lower mean value (159 mV) at 10 cm. We have explored the probable sources of N2O in the mangrove forest sediment using correlation analysis between the data obtained in this study and comparing these observations with previous studies of N2O metabolism. Our results, while not excluding the possibility of N2O production through denitrification, indicate that N2O is produced mainly by nitrification in sediments of this mangrove forest.

Tree Productivity Enhanced with Conversion from Forest to Urban Land Covers.

Science.gov (United States)

Briber, Brittain M; Hutyra, Lucy R; Reinmann, Andrew B; Raciti, Steve M; Dearborn, Victoria K; Holden, Christopher E; Dunn, Allison L

2015-01-01

Urban areas are expanding, changing the structure and productivity of landscapes. While some urban areas have been shown to hold substantial biomass, the productivity of these systems is largely unknown. We assessed how conversion from forest to urban land uses affected both biomass structure and productivity across eastern Massachusetts. We found that urban land uses held less than half the biomass of adjacent forest expanses with a plot level mean biomass density of 33.5 ± 8.0 Mg C ha(-1). As the intensity of urban development increased, the canopy cover, stem density, and biomass decreased. Analysis of Quercus rubra tree cores showed that tree-level basal area increment nearly doubled following development, increasing from 17.1 ± 3.0 to 35.8 ± 4.7 cm(2) yr(-1). Scaling the observed stem densities and growth rates within developed areas suggests an aboveground biomass growth rate of 1.8 ± 0.4 Mg C ha(-1) yr(-1), a growth rate comparable to nearby, intact forests. The contrasting high growth rates and lower biomass pools within urban areas suggest a highly dynamic ecosystem with rapid turnover. As global urban extent continues to grow, cities consider climate mitigation options, and as the verification of net greenhouse gas emissions emerges as critical for policy, quantifying the role of urban vegetation in regional-to-global carbon budgets will become ever more important.

Light-emitting diode lighting for forest nursery seedling production

Science.gov (United States)

R. Kasten Dumroese; Jeremiah R. Pinto; Anthony S. Davis

2015-01-01

Crop lighting is an energy-intensive necessity for nursery production of high-quality native plants and forest tree seedlings. During the winter months (especially in northern USA latitudes) or overcast or cloudy days, the amount of solar radiation reaching greenhouse crops is insufficient resulting in growth cessation, early terminal bud formation, and failure of...

Socio-Economic Analysis Of Income Effects Of Forest Products ...

African Journals Online (AJOL)

This study examined the economic importance of exploiting forest products in Enugu State. This study shows that majority of the household heads were between the age of 31 and 50 years. From the study it was found that more of the household heads are males. They engage mainly in different ombined operation in ...

Contribution of National near Real Time MODIS Forest Maximum Percentage NDVI Change Products to the U.S. ForWarn System

Science.gov (United States)

Spruce, Joseph P.; Hargrove, William; Gasser, Gerald; Smoot, James; Kuper, Philip D.

2012-01-01

This presentation reviews the development, integration, and testing of Near Real Time (NRT) MODIS forest % maximum NDVI change products resident to the USDA Forest Service (USFS) ForWarn System. ForWarn is an Early Warning System (EWS) tool for detection and tracking of regionally evident forest change, which includes the U.S. Forest Change Assessment Viewer (FCAV) (a publically available on-line geospatial data viewer for visualizing and assessing the context of this apparent forest change). NASA Stennis Space Center (SSC) is working collaboratively with the USFS, ORNL, and USGS to contribute MODIS forest change products to ForWarn. These change products compare current NDVI derived from expedited eMODIS data, to historical NDVI products derived from MODIS MOD13 data. A new suite of forest change products are computed every 8 days and posted to the ForWarn system; this includes three different forest change products computed using three different historical baselines: 1) previous year; 2) previous three years; and 3) all previous years in the MODIS record going back to 2000. The change product inputs are maximum value NDVI that are composited across a 24 day interval and refreshed every 8 days so that resulting images for the conterminous U.S. are predominantly cloud-free yet still retain temporally relevant fresh information on changes in forest canopy greenness. These forest change products are computed at the native nominal resolution of the input reflectance bands at 231.66 meters, which equates to approx 5.4 hectares or 13.3 acres per pixel. The Time Series Product Tool, a MATLAB-based software package developed at NASA SSC, is used to temporally process, fuse, reduce noise, interpolate data voids, and re-aggregate the historical NDVI into 24 day composites, and then custom MATLAB scripts are used to temporally process the eMODIS NDVIs so that they are in synch with the historical NDVI products. Prior to posting, an in-house snow mask classification product

Effects of active forest fire on terrestrial ecosystem production and greenhouse gas emissions

Science.gov (United States)

Sannigrahi, Srikanta; Rahmat, Shahid; Bhatt, Sandeep; Rana, Virendra

2017-04-01

The forest fire is one of the most catalysing agents which degrade an ecosystems leading to the loss of net and gross primary productivity (NPP & GPP) and carbon sequestration service. Additionally, it can suppress the efficiency of service providing capacity of an ecosystem throughout the time and space. Remote sensing-based forest fire estimation in a diverse ecosystem is very much essential for mitigating the biodiversity and productivity losses due to the forest fire. Satellite-based Land Surface Temperature (LST) has been calculated for the pre-fire and fire years to identify the burn severity hotspot across all eco-regions in the Lower Himalaya region. Several burn severity indices: Normalized Burn Ratio (NBR), Burnt Area Index (BAI), Normalized Multiband Drought Index (NMDI), Soil Adjusted Vegetation Index (SAVI), Global Environmental Monitoring Index (GEMI), Enhance Vegetation Index (EVI) have been used in this study to quantify the spatial and temporal changes (delta) of the selected indices. Two Light Use Efficiency (LUE) models: Carnegie- Ames-Stanford-Approach (CASA) and Vegetation Photosynthesis Model (VPM) have been used to quantify the terrestrial Net Primary Productivity (NPP) in the pre-fire and fire years across all biomes of the region. A novel approach has been preceded in this field to demonstrate the correlation between forest fire density (FFD) and NPP. A strong positive correlation was found between burn severity indices and predicted NPP: BAI and NPP (r = 0.49), NBR and NPP: (r = 0.58), EVI and NPP: (r = 0.72), SAVI and NPP: (r = 0.67), whereas, a negative association has noted between the NMDI and NPP: (r = -0.36) during the both studied years. Results have shown that the NPP is highly correlated with the forest fire density (R2 = 0.75, RMSE = 5.03 gC m-2 month-1). The estimated LST of the individual fire days has witnessed a sharp temperature increase by > 6oC - 9oC in comparison to the non-fire days clearly indicates high fire risk (in

A Source Identification Algorithm for INTEGRAL

Science.gov (United States)

Scaringi, Simone; Bird, Antony J.; Clark, David J.; Dean, Anthony J.; Hill, Adam B.; McBride, Vanessa A.; Shaw, Simon E.

2008-12-01

We give an overview of ISINA: INTEGRAL Source Identification Network Algorithm. This machine learning algorithm, using Random Forests, is applied to the IBIS/ISGRI dataset in order to ease the production of unbiased future soft gamma-ray source catalogues. The key steps of candidate searching, filtering and feature extraction are described. Three training and testing sets are created in order to deal with the diverse timescales and diverse objects encountered when dealing with the gamma-ray sky. Three independent Random Forest are built: one dealing with faint persistent source recognition, one dealing with strong persistent sources and a final one dealing with transients. For the latter, a new transient detection technique is introduced and described: the Transient Matrix. Finally the performance of the network is assessed and discussed using the testing set and some illustrative source examples.

Long-term patterns of fruit production in five forest types of the South Carolina upper coastal plain

International Nuclear Information System (INIS)

Greenberg, Cathryn H.; Levey, Douglas J.; Kwit, Charles; Mccarty, John P.; Pearson, Scott F.

2012-01-01

Fleshy fruit is a key food resource for many vertebrates and may be particularly important energy source to birds during fall migration and winter. Hence, land managers should know how fruit availability varies among forest types, seasons, and years. We quantified fleshy fruit abundance monthly for 9 years (1995–2003) in 56 0.1-ha plots in 5 forest types of South Carolina's upper Coastal Plain, USA. Forest types were mature upland hardwood and bottomland hardwood forest, mature closed-canopy loblolly (Pinus taeda) and longleaf pine (P. palustris) plantation, and recent clearcut regeneration harvests planted with longleaf pine seedlings. Mean annual number of fruits and dry fruit pulp mass were highest in regeneration harvests (264,592 ± 37,444 fruits; 12,009 ± 2,392 g/ha), upland hardwoods (60,769 ± 7,667 fruits; 5,079 ± 529 g/ha), and bottomland hardwoods (65,614 ± 8,351 fruits; 4,621 ± 677 g/ha), and lowest in longleaf pine (44,104 ± 8,301 fruits; 4,102 ± 877 g/ha) and loblolly (39,532 ± 5,034 fruits; 3,261 ± 492 g/ha) plantations. Fruit production was initially high in regeneration harvests and declined with stand development and canopy closure (1995–2003). Fruit availability was highest June–September and lowest in April. More species of fruit-producing plants occurred in upland hardwoods, bottomland hardwoods, and regeneration harvests than in loblolly and longleaf pine plantations. Several species produced fruit only in 1 or 2 forest types. In sum, fruit availability varied temporally and spatially because of differences in species composition among forest types and age classes, patchy distributions of fruiting plants both within and among forest types, fruiting phenology, high inter-annual variation in fruit crop size by some dominant fruit-producing species, and the dynamic process of disturbance-adapted species colonization and decline, or recovery in recently harvested stands. As a result, land managers could enhance fruit

Projected US timber and primary forest product market impacts of climate change mitigation through timber set-asides

Science.gov (United States)

Prakash Nepal; Peter J. Ince; Kenneth E. Skog; Sun J. Chang

2013-01-01

Whereas climate change mitigation involving payments to forest landowners for accumulating carbon on their land may increase carbon stored in forests, it will also affect timber supply and prices. This study estimated the effect on US timber and primary forest product markets of hypothetical timber set-aside scenarios where US forest landowners would be paid to forego...

Power production from radioactively contaminated biomass and forest litter in Belarus - Phase 1b

Energy Technology Data Exchange (ETDEWEB)

Roed, J.; Andersson, K.G.; Fogh, C.L. [and others

2000-03-01

The Chernobyl accident has led to radioactive contamination of vast Belarussian forest areas. A total scheme for remediation of contaminated forest areas and utilisation of the removed biomass in safe energy production is being investigated in a Belarussian-American-Danish collaborative project. Here the total radiological impact of the scheme is considered. This means that not only the dose reductive effect of the forest decontamination is taken into account, but also the possible adverse health effects in connection with the much needed bio-energy production. This report presents the results of an in-country, commercial-scale investigation of the effect of a baghouse filter in retaining contaminants so that they are not released to the atmosphere in the biomass energy production process. Approximately 99,5 % of the activity of a commercially representative, dust-laden boiler flue gas was removed from the stream by using a combination of a cyclone and a baghouse filter. (au)

Radiocesium in the forest and forest industry. Studies on the flow, occurrence and technological enhancement of radionuclides in the forest industry with emphasis on the behaviour of radiocesium

International Nuclear Information System (INIS)

Ravila, A.

1998-01-01

In the aftermath of the nuclear weapons testing and as compared with agriculture, the forest industry has received relatively little attention in spite of its large-scale use of radiocesium-contaminated wood and water. After the Chernobyl nuclear power plant accident in 1986, numerous studies of the forest environment have been conducted with respect to radionuclide transfer through the forest ecosystem or its many components. Still, the impact from radioactive fallout on the forest industries that receive the bulk fraction of biomass removed from the forest has scarcely been investigated. Recycling process elements is a necessity in chemical pulping to be competitive. The chemical pulping process is primarily designed to extract, separate and recover the digesting agent carriers such as sodium and complementary carriers such as calcium needed for the production of fresh cooking liquors. Besides these chemical elements, unwanted elements in the process such as K and many other chemical elements are also retained as a consequence of their chemical similarity to sodium and calcium. Notably, two such elements are the long-lived fallout fission products radiocesium and radiostrontium which build-up to substantial activities in parts of the pulp mill recovery cycle and in ash and sludge deposits. Improvements of the pulp recovery processes and the striving towards completely closed systems are estimated to yield around 30 GBq 137 Cs per Bq kg -1 of 137 Cs in wood as an upper limit of the radiocesium activity inventory within an average Nordic pulp mill site. In the perspective of new emerging practices for industrial resource management of by-products, radionuclides will not only be transferred from the forest to the industries, but may be returned to the forest with by-products rich in valuable plant nutrients. The radionuclides in the forest soil and trees constitute a source of radiation and the consequences thereof can be evaluated in terms of the resulting absorbed